WorldWideScience

Sample records for hydrocarbons heavy metals

  1. Levels of heavy metals, total hydrocarbon and organic carbon ...

    African Journals Online (AJOL)

    Levels of heavy metals, total hydrocarbon and organic carbon contents of sediments from Ikpoba (Edo) and Ethiope (Delta) Rivers of Nigeria. ... THC contents were 6.50mg/kg (Ikpoba river) and 42.10mg/kg (Ethiope river). The organic contents ...

  2. Polycyclic Aromatic Hydrocarbons and Heavy Metals in Kostrena Coastal Area

    OpenAIRE

    Tomić Linšak, Dijana; Linšak, Željko; Bešić, Denis; Vojčić, Nina; Teležar, Mirna; Čoklo, Miran; Šušnić, Saša; Mićović, Vladimir

    2011-01-01

    The aim of this study was to determine pollution by polycyclic aromatic hydrocarbons (PAH) and heavy metals in seawater and sediment in Kostrena coastal area, as well as their toxicity using bioluminescence based tests. Total PAH concentration in seawater ranged 1.7-155.3 ng/L. The share of carcinogenetic PAH was relatively high, ranging 22–48.3%. Nickel concentrations in seawater were beyond detection limits (

  3. Polycyclic aromatic hydrocarbons and heavy metals in Kostrena coastal area.

    Science.gov (United States)

    Linsak, Dijana Tomić; Linsak, Zeljko; Besić, Denis; Vojcić, Nina; Telezar, Mirna; Coklo, Miran; Susnić, Sasa; Mićović, Vladimir

    2011-12-01

    The aim of this study was to determine pollution by polycyclic aromatic hydrocarbons (PAH) and heavy metals in seawater and sediment in Kostrena coastal area, as well as their toxicity using bioluminescence based tests. Total PAH concentration in seawater ranged 1.7-155.3 ng/L. The share of carcinogenetic PAH was relatively high, ranging 22-48.3%. Nickel concentrations in seawater were beyond detection limits (chrome concentrations were beyond detection limits, and copper concentrations were also beyond detection limits or extremely low (up to 0.32 microg/L). EC50 values in seawater ranged 23.80-90.90 ng/L. Correlation between total PAH concentration and toxicity of seawater showed strong connection between them (r = 0.9579). Total PAH concentration in marine sediment ranged 58.02-1116 microg/kg dry weight (d.w.). The share of carcinogenetic PAH was extremely high ranging 10-53%. Nickel concentrations in marine sediment ranged 8-24 mg/kg d.w., vanadium concentrations ranged 24-42 mg/kg d.w., chrome concentrations ranged 11-19 mg/kg d.w., and copper concentrations ranged 7-25 mg/kg d.w. EC50 values in marine sediment ranged 818-4596 microg/kg d.w. Correlation between total PAH concentration and toxicity of marine sediment showed weak connection between them (r = 0.2590). Previous studies of seawater samples from areas of the Adriatic sea under the direct influence of oil industry did not include concentrations of heavy metals, which makes our study the first to present such comprehensive results. Our results point out the need for further evaluations and following of marine environment pollution and its consequences on living organisms and marine ecosystem in whole.

  4. Bioremediation of petroleum hydrocarbons in anoxic marine sediments: consequences on the speciation of heavy metals.

    Science.gov (United States)

    Dell'Anno, Antonio; Beolchini, Francesca; Gabellini, Massimo; Rocchetti, Laura; Pusceddu, Antonio; Danovaro, Roberto

    2009-12-01

    We investigated the effects of biostimulation and bioagumentation strategies applied to harbor sediments displaying reducing conditions and high concentrations of petroleum hydrocarbons and heavy metals. We compared the microbial efficiency of hydrocarbon removal from sediments maintained for 60 days in anoxic conditions and inoculated with acetate, sulfate-reducing bacterial strains and acetate and sulfate-reducing bacteria. All treatments determined a significant increase in the microbial growth and significant decreases of hydrocarbon contents and of redox potential values. The addition of sulfate-reducing bacterial strains to the sediment was the most efficient treatment for the hydrocarbon removal. In all experiments, significant changes of the heavy metals' phase repartition were observed. The results reported here suggest that the biodegradation of petroleum hydrocarbons in anoxic marine sediments may be enhanced by stimulating microbial anaerobic metabolism, but care should be applied to monitor the potential changes in the mobility and bioavailability of heavy metals induced by bio-treatments.

  5. Efficiency of lipopeptide biosurfactants in removal of petroleum hydrocarbons and heavy metals from contaminated soil.

    Science.gov (United States)

    Singh, Anil Kumar; Cameotra, Swaranjit Singh

    2013-10-01

    This study describes the potential application of lipopeptide biosurfactants in removal of petroleum hydrocarbons and heavy metals from the soil samples collected from industrial dumping site. High concentrations of heavy metals (like iron, lead, nickel, cadmium, copper, cobalt and zinc) and petroleum hydrocarbons were present in the contaminated soil samples. Lipopeptide biosurfactant, consisting of surfactin and fengycin was obtained from Bacillus subtilis A21. Soil washing with biosurfactant solution removed significant amount of petroleum hydrocarbon (64.5 %) and metals namely cadmium (44.2 %), cobalt (35.4 %), lead (40.3 %), nickel (32.2 %), copper (26.2 %) and zinc (32.07 %). Parameters like surfactant concentration, temperature, agitation condition and pH of the washing solution influenced the pollutant removing ability of biosurfactant mixture. Biosurfactant exhibited substantial hydrocarbon solubility above its critical micelle concentration. During washing, 50 % of biosurfactant was sorbed to the soil particles decreasing effective concentration during washing process. Biosurfactant washed soil exhibited 100 % mustard seed germination contradictory to water washed soil where no germination was observed. The results indicate that the soil washing with mixture of lipopeptide biosurfactants at concentrations above its critical micelle concentration can be an efficient and environment friendly approach for removing pollutants (petroleum hydrocarbon and heavy metals) from contaminated soil.

  6. Heavy Metals and Polycyclic Aromatic Hydrocarbons in Urban Leaf Litter Designated for Combustion

    Directory of Open Access Journals (Sweden)

    Meike Nitsche

    2017-03-01

    Full Text Available Vast amounts of leaf litter have to be disposed of by city administrations. This biomass has the potential for energy conversion, but contamination with pollutants can adversely affect this usage. We investigated leaf litter samples from the city of Kassel by analyzing their heavy metal and polycyclic aromatic hydrocarbon (PAH concentrations. Leaf samples were indeed contaminated with heavy metals and PAHs and contamination was influenced by provenience and collection technique. A simple cleaning system of washing and subsequent mechanical dewatering significantly reduced heavy metal concentration. Regression models were developed for contamination with heavy metals which showed that contamination could be successfully estimated using the total ash content of the sample as a predictor, with an R2 of up to 0.77. It can be concluded that leaf litter from cities is a possible feedstock for energetic conversion, provided a cleaning step is applied.

  7. Accumulation of petroleum hydrocarbons and heavy metals in clams (Ruditapes philippinarum) in Jiaozhou Bay, China

    Institute of Scientific and Technical Information of China (English)

    MA Haiqing; SONG Qian; WANG Xuchen

    2009-01-01

    Accumulation and distributions of aliphatic and polyaromatic hydrocarbons (PAHs) and heavy metals were measured in tissues of the clam Ruditapes philippinarum collected from 5 sites in Jiaozhou Bay, Qingdao, China. The concentrations of total aliphatic hydrocarbon and PAHs ranged from 570 to 2 574 ng/gdw (gram dry weight) and from 276 to 939 ng/gdw, in the most and least polluted sites, respectively. The bio-accumulation of hydrocarbons and PAHs in the clams appeared to be selective. Aliphatic hydrocarbons were predominantly represented by short chain (hydrocarbons were likely the major contamination source. The selective uptake of 3 and 4 ring PAHs, such as naphthalene, fluorene, phenanthrene, fluoranthene and pyrene, by the clams was probably related to the physiological and bio-kinetic processes that were energetically favorable for uptake of compounds with fewer rings. Accumulation of the metals Cd, Cu, Zn, Pb, Cr, Hg, and As in the clam tissues also showed high variability, ranging from 0.043 to 87μg/gdw. Among the 7 detected metals, Zn, Cd, Cu, and As had a particularly high potential of accumulation in R. philippinarum. In general, a positive correlation was found between the tissue concentrations and sediment concentrations of hydrocarbons and of some metals. Our study suggests that moderate contamination with polyaromatic hydrocarbons, and low to moderate contamination with metals, currently exists for clam R. philippinarum in Jiaozhou Bay, in comparison with other regional studies. A long-term monitoring program is certainly needed for assessment of the potential ecological influence and toxicity of these contaminants of R. philippinarum in Jiaozhou Bay.

  8. Heavy metal ions affecting the removal of polycyclic aromatic hydrocarbons by fungi with heavy-metal resistance.

    Science.gov (United States)

    Ma, Xiao-Kui; Ling Wu, Ling; Fam, Hala

    2014-12-01

    The co-occurrence of polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs) is very common in contaminated environments. It is of paramount importance and great challenge to exploit a bioremediation to remove PAHs in these environments with combined pollution. We approached this question by probing the influence of HMs coexisting with PAHs on the removal of PAHs by Acremonium sp. P0997 possessing metal resistance. A removal capability for naphthalene, fluorene, phenanthrene, anthracene, and fluoranthenepresentalone (98.6, 99.3, 89.9, 60.4, and 70 %, respectively) and in a mixture (96.9, 71.8, 67.0, 85.0, and 87.9 %, respectively) was achieved in mineral culture inoculated with Acremonium sp. P0997, and this strain also displayed high resistance to the individual HMs (Mn(2+), Fe(2+), Zn(2+), Cu(2+), Al(3+), and Pb(2+)). The removal of individual PAHs existing in a mixture was differently affected by the separately tested HMs. Cu(2+)enhanced the partition process of anthracene to dead or alive mycelia and the contribution of the biosorption by this strain but imposed a little negative influence on the contribution of biodegradation to the total removal of anthracene individually in a culture. However, Mn(2+) had an inhibitory effect on the partition process of anthracene to dead or alive mycelia and decreased the contributions of both biosorption and biodegradation to the total anthracene removal. This work showcased the value of fungi in bioremediation for the environments with combined pollution, and the findings have major implications for the bioremediation of organic pollutants in metal-organic mixed contaminated sites.

  9. Bioremediation of heavy metals and petroleum hydrocarbons in diesel contaminated soil with the earthworm: Eudrilus eugeniae

    OpenAIRE

    Ekperusi, Ogheneruemu Abraham; Aigbodion, Iruobe Felix

    2015-01-01

    A laboratory study on the bioremediation of diesel contaminated soil with the earthworm Eudrilus eugeniae (Kingberg) was conducted. 5 ml of diesel was contaminated into soils in replicates and inoculated with E. eugeniae for 90 days. Physicochemical parameters, heavy metals and total petroleum hydrocarbons were analyzed using AAS. BTEX in contaminated soil and tissues of earthworms were determined with GC-FID. The activities of earthworms resulted in a decrease in pH (3.0 %), electrical condu...

  10. [Investigation of heavy metal and polycyclic aromatic hydrocarbons contamination in street dusts in urban Beijing].

    Science.gov (United States)

    Xiang, Li; Li, Ying-Xia; Shi, Jiang-Hong; Liu, Jing-Ling

    2010-01-01

    This paper investigated the contamination levels of heavy metal and polycyclic aromatic hydrocarbons (PAHs) in street dusts in different functional areas in urban Beijing. Results show that the mean concentrations of Cd, Hg, Cr, Cu, Ni, Pb and Zn in street dusts in Beijing are 710 ng/g, 307 ng/g, 85.0 microg/g, 78.3 microg/g, 41.1 microg/g, 69.6 microg/g and 248.5 microg/g, respectively, which are significantly lower than those in most cities around the world and Shenyang, Shanghai in China. The mean concentration of Sigma 16PAHs in street dusts in Beijing is 0.398 microg/g, which is also lower than those of Handan, Tianjin and Shanghai. Non-parametric Friedman test demonstrates significant differences of heavy metal contents on street dusts from different functional zones. Street dusts in residential area and parks have lower heavy metal and PAHs concentrations than the street dusts from areas of high traffic density. The concentrations of heavy metals follow the order Zn > Cr > Cu > Pb > Ni > Cd > Hg, which is consistent with the situation in other cities around the world. The geoaccumulation index analysis shows that street dust in urban Beijing is moderately polluted by Cd, Zn and Cu, little polluted by Cr and Pb and practically unpolluted by Ni. The contamination levels of Sigma 16PAHs on street dusts vary greatly in different functional zones with parks little polluted, residential areas moderately to strongly polluted and traffic related areas strongly polluted to extremely polluted. Mass loading of heavy metals and PAHs is largely associated with street dusts of size range dust sweeping devices to remove not only the fine particle but also the coarser particles.

  11. Heavy metal, trace element and petroleum hydrocarbon pollution in the Arabian Gulf: Review

    Directory of Open Access Journals (Sweden)

    Afnan Mahmood Freije

    2015-04-01

    Full Text Available The Arabian Gulf environmental status was assessed based on studies conducted in Bahrain, Kuwait, Oman, Saudi Arabia, Qatar, and United Arab Emirates (UAE during 1983–2011. This review examines all sorts of pollutions in the Arabian Gulf area over the last three decades. Approximately 50 published studies were reviewed in order to determine the pollution status in the Arabian Gulf regarding heavy metals and organic substances. Three types of environmental pollutions including marine and coastal, soil, and air were addressed in this review as well as sources of pollutants and their effect on biological systems, marine organisms, and human health. Emphasis is placed on marine pollution, particularly toxic metal, and petroleum hydrocarbon contaminations. Major parts of this review discuss the consequences of the 1991 Gulf War on the environment, and the substantial changes associated with the marine habitats. The effects of oil field fires in Kuwait following the 1991 Gulf War were evaluated through studies that investigated hydrocarbons concentration and trace metals in samples of near shore sediments, bivalves, and fish collected from Kuwait, Saudi Arabia, Bahrain, UAE, and Oman. Total petroleum hydrocarbons (TPH and polycyclic aromatic hydrocarbons (PAHs were discussed in biota (fish and various bivalves and coastal sediments from six countries in the Gulf. The review has revealed different concentrations of pollutants, low, moderately, and chronically contaminated areas from oil and metals. It has also outlined effective sustainable management measures and goals as a first step in the evaluation of coastal, marine, soil, and air environment in the Arabian Gulf area.

  12. Evaluation of phytoremediation of petroleum hydrocarbon and heavy metals with using Catharanthus roseus

    Directory of Open Access Journals (Sweden)

    Mehri Askary Mehrabadi

    2014-08-01

    Full Text Available Crude oil pollution is an inevitable worldwide phenomenon in oil producing and consuming areas that stems from human error, accidental discharge and other sources. The aim of this study was to evaluate the phytoremediation potential of vinca in petroleum-polluted soil. The experiment was laid out as a completely randomized design in 3 replications with different concentrations of crude oil (0, 0.5, 1, 2, 3 and 4 % V/W in pot planting stage. At the end of the 70-day period, soil samples were analyzed for total hydrocarbons removal. Contents of pb, zn and Ni were measured by atomic absorption from the soils and the leaves. Statistical analysis of data were performed on the basis of duncan’s test and by using of SPSS16 software. In concentrations higher than 3 % no growth was observed. The growth parameters such as stem length, stem fresh and dry matter decreased progressively from 0.5-3 % crude oil in soil. The results showed heavy metal accumulation in plant leaves and reduction of them in the soil. Heavy metals containing zinc, lead and nickel in plant increased in different concentration of crude oil. Total hydrocarbons and heavy metals containing zinc, lead and nickel reduced were in planted contaminated soil. This study showed that Periwinkle was able to grow and survive in low concentrations of oil and reduced pollutants in the soil. Based upon these results, Catharanthus roseus can be used as phytoremediator of petroleum-contaminated soil in low concentrations.

  13. Heavy metal-immobilizing organoclay facilitates polycyclic aromatic hydrocarbon biodegradation in mixed-contaminated soil.

    Science.gov (United States)

    Biswas, Bhabananda; Sarkar, Binoy; Mandal, Asit; Naidu, Ravi

    2015-11-15

    Soils contaminated with a mixture of heavy metals and polycyclic aromatic hydrocarbons (PAHs) pose toxic metal stress to native PAH-degrading microorganisms. Adsorbents such as clay and modified clay minerals can bind the metal and reduce its toxicity to microorganisms. However, in a mixed-contaminated soil, an adsorption process more specific to the metals without affecting the bioavailability of PAHs is desired for effective degradation. Furthermore, the adsorbent should enhance the viability of PAH-degrading microorganisms. A metal-immobilizing organoclay (Arquad(®) 2HT-75-bentonite treated with palmitic acid) (MIOC) able to reduce metal (cadmium (Cd)) toxicity and enhance PAH (phenanthrene) biodegradation was developed and characterized in this study. The MIOC differed considerably from the parent clay in terms of its ability to reduce metal toxicity (MIOC>unmodified bentonite>Arquad-bentonite). The MIOC variably increased the microbial count (10-43%) as well as activities (respiration 3-44%; enzymatic activities up to 68%), and simultaneously maintained phenanthrene in bioavailable form in a Cd-phenanthrene mixed-contaminated soil over a 21-day incubation period. This study may lead to a new MIOC-assisted bioremediation technique for PAHs in mixed-contaminated soils.

  14. Heavy metal-immobilizing organoclay facilitates polycyclic aromatic hydrocarbon biodegradation in mixed-contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Bhabananda; Sarkar, Binoy [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, SA 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, P.O. Box 486, Salisbury, SA 5106 (Australia); Mandal, Asit [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, SA 5095 (Australia); Division of Soil Biology, Indian Institute of Soil Science, Bhopal, Madhya Pradesh (India); Naidu, Ravi [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, SA 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, P.O. Box 486, Salisbury, SA 5106 (Australia)

    2015-11-15

    Highlights: • A novel metal-immobilizing organoclay (MIOC) synthesized and characterized. • MIOC immobilizes toxic metals and reduces metal bioavailability. • It enhances PAH-bioavailability to soil bacteria. • It improves microbial growth and activities in mixed-contaminated soils. • MIOC facilitates PAH-biodegradation in metal co-contaminated soils. - Abstract: Soils contaminated with a mixture of heavy metals and polycyclic aromatic hydrocarbons (PAHs) pose toxic metal stress to native PAH-degrading microorganisms. Adsorbents such as clay and modified clay minerals can bind the metal and reduce its toxicity to microorganisms. However, in a mixed-contaminated soil, an adsorption process more specific to the metals without affecting the bioavailability of PAHs is desired for effective degradation. Furthermore, the adsorbent should enhance the viability of PAH-degrading microorganisms. A metal-immobilizing organoclay (Arquad{sup ®} 2HT-75-bentonite treated with palmitic acid) (MIOC) able to reduce metal (cadmium (Cd)) toxicity and enhance PAH (phenanthrene) biodegradation was developed and characterized in this study. The MIOC differed considerably from the parent clay in terms of its ability to reduce metal toxicity (MIOC > unmodified bentonite > Arquad–bentonite). The MIOC variably increased the microbial count (10–43%) as well as activities (respiration 3–44%; enzymatic activities up to 68%), and simultaneously maintained phenanthrene in bioavailable form in a Cd-phenanthrene mixed-contaminated soil over a 21-day incubation period. This study may lead to a new MIOC-assisted bioremediation technique for PAHs in mixed-contaminated soils.

  15. Activity and functional diversity of microbial communities in long-term hydrocarbon and heavy metal contaminated soils

    Directory of Open Access Journals (Sweden)

    Markowicz Anna

    2016-12-01

    Full Text Available The impacts of long-term polycyclic aromatic hydrocarbons (PAHs and heavy metal pollution on soil microbial communities functioning were studied in soils taken from an old coke plant. The concentrations of PAHs in the tested soils ranged from 171 to 2137 mg kg-1. From the group of tested heavy metals, concentrations of lead were found to be the highest, ranging from 57 to 3478 mg kg-1, while zinc concentrations varied from 247 to 704 mg kg-1 and nickel from 10 to 666 mg kg-1. High dehydrogenase, acid and alkaline phosphatase activities were observed in the most contaminated soil. This may indicate bacterial adaptation to long-term heavy metal and hydrocarbon contamination. However, the Community Level Physiological Profiles (CLPPs analysis showed that the microbial functional diversity was reduced and influenced to a higher extent by some metals (Pb, Ni, moisture and conductivity than by PAHs.

  16. Impact of hydrocarbons, PCBs and heavy metals on bacterial communities in Lerma River, Salamanca, Mexico: Investigation of hydrocarbon degradation potential.

    Science.gov (United States)

    Brito, Elcia M S; De la Cruz Barrón, Magali; Caretta, César A; Goñi-Urriza, Marisol; Andrade, Leandro H; Cuevas-Rodríguez, Germán; Malm, Olaf; Torres, João P M; Simon, Maryse; Guyoneaud, Remy

    2015-07-15

    Freshwater contamination usually comes from runoff water or direct wastewater discharges to the environment. This paper presents a case study which reveals the impact of these types of contamination on the sediment bacterial population. A small stretch of Lerma River Basin, heavily impacted by industrial activities and urban wastewater release, was studied. Due to industrial inputs, the sediments are characterized by strong hydrocarbon concentrations, ranging from 2 935 to 28 430μg·kg(-1) of total polyaromatic hydrocarbons (PAHs). These sediments are also impacted by heavy metals (e.g., 9.6μg·kg(-1) of Cd and 246μg·kg(-1) of Cu, about 8 times the maximum recommended values for environmental samples) and polychlorinated biphenyls (ranging from 54 to 123μg·kg(-1) of total PCBs). The bacterial diversity on 6 sediment samples, taken from upstream to downstream of the main industrial and urban contamination sources, was assessed through TRFLP. Even though the high PAH concentrations are hazardous to aquatic life, they are not the only factor driving bacterial community composition in this ecosystem. Urban discharges, leading to hypoxia and low pH, also strongly influenced bacterial community structure. The bacterial bioprospection of these samples, using PAH as unique carbon source, yielded 8 hydrocarbonoclastic strains. By sequencing the 16S rDNA gene, these were identified as similar to Mycobacterium goodii, Pseudomonas aeruginosa, Pseudomonas lundensis or Aeromonas veronii. These strains showed high capacity to degrade naphthalene (between 92 and 100% at 200mg·L(-1)), pyrene (up to 72% at 100mg·L(-1)) and/or fluoranthene (52% at 50mg·L(-1)) as their only carbon source on in vitro experiments. These hydrocarbonoclastic bacteria were detected even in the samples upstream of the city of Salamanca, suggesting chronical contamination, already in place longer before. Such microorganisms are clearly potential candidates for hydrocarbon degradation in the

  17. Distribution of selected carcinogenic hydrocarbon and heavy metals in an oil-polluted agriculture zone.

    Science.gov (United States)

    Nwaichi, E O; Wegwu, M O; Nwosu, U L

    2014-12-01

    Owing to the importance of clean and fertile agricultural soil for the continued existence of man, this study investigated the concentrations of total petroleum hydrocarbons (TPHs), polycyclic aromatic hydrocarbons (PAHs) and some heavy metals in soils and selected commonly consumed vegetables and tubers from oil-polluted active agricultural farmland in Gokana of Ogoniland, Rivers State, Nigeria. Samples from Umuchichi, Osisioma Local Government Area in Abia State, Nigeria, a non-oil-polluted area constituted the control. In test and control, up to 3,830 ± 19.6 mgkg(-1) dw and 6,950 ± 68.3 mgkg(-1) dw (exceeding DPR set limits) and 11.3 ± 0.04 mgkg(-1) dw and 186 ± 0.02 mgkg(-1) dw for TPH and PAHs, respectively, were recorded in test soil and plant samples, respectively. Among the metals studied (Pb, Cd, Cr, Mn, Fe and Zn), Pb and Cr uptake exceeded WHO set limits for crops in test samples. Combined sources of pollution were evident from our studies. Bitterleaf and Waterleaf could be tried as bioindicators owing to expressed contaminants uptake pattern.

  18. Heavy metals and polycyclic aromatic hydrocarbons in surface sediments of Karoon River, Khuzestan Province, Iran.

    Science.gov (United States)

    Keshavarzi, Behnam; Mokhtarzadeh, Zeinab; Moore, Farid; Rastegari Mehr, Meisam; Lahijanzadeh, Ahmadreza; Rostami, Soqra; Kaabi, Helena

    2015-12-01

    Karoon is the longest river in Iran and provides water for industries located along its banks, such as metal, petrochemical, and oil industries. It is also the source of drinking water for cities such as Ahwas, Abadan, and Khorramshahr. In this study, 34 and 18 surface sediment samples were collected and analyzed for heavy metals (Al, As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) and polycyclic aromatic hydrocarbons (PAHs). The measured concentrations of heavy metals were compared with US EPA sediment quality guidelines, and the results showed that Cu concentration was above the threshold effect level (TEL) in 65.67% of the samples and Hg concentration was above the effect range median (ERM) in some samples. The results revealed that Hg was severely enriched (5 < enrichment factor < 20) and classified in very high ecological risk index category. It is the major metallic contaminant in the study area. The total PAH concentrations ranged from 11.54-117,730 μg/kg, with the mean value of 7034.55 μg/kg dominated by lower molecular weight (LMW) PAHs. The total potentially carcinogenic PAHs (∑cPAHs) in sediment samples ranged from 2.09 to 31,930 μg/kg, indicating high carcinogenic potential of sediments in the study area. The total toxic equivalent (TEQ) values ranged from 1.06 to 7228.7 μg/kg. Maximum TEQ occurred in Abadan oil refinery station followed by Khorramshahr soap factory and Abadan petrochemical complex. Principal component analysis and cluster analysis also revealed the relationships between the studied parameters and identified their probable sources.

  19. Heavy metals and polycyclic aromatic hydrocarbons: pollution and ecological risk assessment in street dust of Tehran.

    Science.gov (United States)

    Saeedi, Mohsen; Li, Loretta Y; Salmanzadeh, Mahdiyeh

    2012-08-15

    50 street dust samples from four major streets in eastern and southern Tehran, the capital of Iran, were analyzed for metal pollution (Cu, Cr, Pb, Ni, Cd, Zn, Fe, Mn and Li). Hakanson's method was used to determine the Risk Index (RI) and ecological risks. Amongst these samples, 21 were also analyzed for polycyclic aromatic hydrocarbons (PAHs). Correlation, cluster and principal component analyses identified probable natural and anthropogenic sources of contaminants. The dust had elevated concentrations of Pb, Cd, Cu, Cr, Ni, Zn, Fe and PAHs. Enrichment factors of Cu, Pb, Cd and Zn showed that the dust is extremely enriched in these metals. Multivariate statistical analyses revealed that Cu, Pb, Zn, Fe and PAHs and, to a lesser extent, Cr and Ni have common anthropogenic sources. While Mn and Li were identified to have natural sources, Cd may have different anthropogenic origins. All samples demonstrated high ecological risk. Traffic and related activities, petrogenic and pyrogenic sources are likely to be the main anthropogenic sources of heavy metals and PAHs in Tehran dust.

  20. Hydrocarbon Pollution and Potential Ecological Risk of Heavy Metals in the Sediments of the Oturuba Creek, Niger Delta, Nigeria

    Directory of Open Access Journals (Sweden)

    Ezekwe Clinton Ifeanyichukwu

    2017-04-01

    Full Text Available This study aimed at examining the impact of oil pollution from artisanal oil refineries on the Oturuba river ecosystem using active river bottom sediment. Specific objectives included to determine the level of hydrocarbons and trace metals (Pb, Cd, Zn, Cu, Ni, V and Mg in the sediments and to relate this with general ecosystem health. The study found elevated concentrations of both hydrocarbons and heavy metals in the range above most sediment quality guidelines exceeding the respective Threshold Effects Level and Probable Effects. Level guideline values and occurring at levels where impairment to biological communities is certain an d where toxicity levels can lead to negative impacts on benthic animals or infaunal communities. Heavy metal geochemical accumulation index and potential ecological risk analysis also returned anomalously high concentrations in the range of very highly polluted sediment environments with very high ecological risk indices, thereby ranking the Oturuba Creek as one of the most polluted coastal river systems in the world.

  1. Heavy metals and polycyclic hydrocarbon compounds in benthic organisms of the Upper Gulf of Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Hungspreugs, M.; Silpipat, S.; Tonapong, C.; Lee, R.F.; Windom, H.L.; Tenore, K.R.

    1984-06-01

    Concentrations of heavy metals and polycyclic aromatic hydrocarbons (PAHs) were measured in bivalves collected in the Upper Gulf of Thailand. PAHs detected included acenaphthene, acenaphthylene, benzo(a)pyrene, fluoranthene, methylphenanthrene, phenanthrene and triphenylene. Benzol(a)pyrene was detected in all species at concentrations varying from 1.0 to 8.2 ng.g/sup -1/. Concentrations of cadmium, cobalt, copper, lead, and nickel were significantly lower in bivalves from the Gulf than in green mussels collected from the mouth of the Chao Phraya River. No correlation was found between metal concentrations in animals and sediment, with the exception of copper. Copper concentrations in polychaetes and clams appeared to correlate with the copper:iron ratio of sediments. High rates of degradation were observed when radiolabelled chlorobenzene, phenanthrene and chrysene were added to water and sediment of the Chao Phraya River. Rates were lower in the waters and sediment of the Gulf of Thailand. The calculated half-lives of chlorobenzene in the Gulf of Thailand and the Chao Phraya River were about 130 and 68 days, respectively. 32 references, 3 figures, 3 tables.

  2. Heavy metals and hydrocarbons contents in soils of urban areas of Yamal autonomous region (Russia)

    Science.gov (United States)

    Alekseev, Ivan; Abakumov, Evgeny; Shamilishvili, George

    2016-04-01

    This investigation is devoted to evaluation of heavy metals and hydrocarbons contents in soils of different functional localities within the Yamalo-Nenets autonomous region (YaNAR, North-Western Siberia, Russia). Geo-accumulation indices Igeo (Müller 1988) were calculated in order to assess soil contamination levels with heavy metals (Cu, Pb, Cd, Zn, Ni, As, Hg) in the studied settlements: Harsaim, Aksarka, Labytnangy, Harp and Salekhard. The degree of soil pollution was assessed according to seven contamination classes (Förstner et al. 1990) in order of increasing numerical value of the index. Cd's regional soil background concentrations of the Yamal peninsula (Moskovchenko 2010), Hg's Earth crust clarke (Greenwood & Earnshaw 2008) and concentrations of the rest trace elements in natural sandy soil from the Beliy island, YaNAR (Tomashunas & Abakumov, 2014) were used in calculations. In general terms, obtained Igeo values in all samples were under or slightly above the 0 level, indicating low to moderate pollution of the studied soils. However, considerable Igeo values of Zn, Pb and Ni were revealed in several samples, suggesting different soil pollution levels, namely: Zn Igeo in Harsaim soil sample of 2.22 - moderate polluted to highly polluted soil; Pb Igeo in Aksarka soil sample of 4.04 - highly polluted to extremely polluted soil; Ni Igeo in Harp soil sample of 4.34 - highly polluted to extremely polluted soil. Soil contamination level was additionally evaluated, comparing with the maximal permissible concentrations (MPCs) of the trace elements in soil (SANPIN 4266-87), established by the national legislation. Almost all samples exceeded the MPC for As in soils (2 mg•kg-1). Concentrations of Ni in several soil samples taken in Harp were 19 times higher than recommended level (20 mg•kg-1). Moderate excess of Zn, Pb and Cu MPCs was also noted. Data obtained will be used in further environmental researches and environmental management purposes in this key

  3. ' HEAVY METALS

    African Journals Online (AJOL)

    exposed fish were about 3-5 times higher than the concentrations detected in control fish. ... The outcome effect 15 impairment of carbohydrate metabolism, which caused fish ..... of pesticides, heavy metal, detergent and petroleum.

  4. Bioremediation of heavy metals and petroleum hydrocarbons in diesel contaminated soil with the earthworm: Eudrilus eugeniae.

    Science.gov (United States)

    Ekperusi, Ogheneruemu Abraham; Aigbodion, Iruobe Felix

    2015-01-01

    A laboratory study on the bioremediation of diesel contaminated soil with the earthworm Eudrilus eugeniae (Kingberg) was conducted. 5 ml of diesel was contaminated into soils in replicates and inoculated with E. eugeniae for 90 days. Physicochemical parameters, heavy metals and total petroleum hydrocarbons were analyzed using AAS. BTEX in contaminated soil and tissues of earthworms were determined with GC-FID. The activities of earthworms resulted in a decrease in pH (3.0 %), electrical conductivity (60.66 %), total nitrogen (47.37 %), chloride (60.66 %), total organic carbon (49.22 %), sulphate (60.59 %), nitrate (60.65 %), phosphate (60.80 %), sodium (60.65 %), potassium (60.67 %), calcium (60.67 %), magnesium (60.68 %), zinc (60.59 %), manganese (60.72 %), copper (60.68 %), nickel (60.58 %), cadmium (60.44 %), vanadium (61.19 %), chromium (53.60 %), lead (60.38 %), mercury (61.11 %), arsenic (80.85 %), TPH (84.99 %). Among the BTEX constituents, only benzene (8.35 %) was detected in soil at the end of the study. Earthworm tissue analysis showed varying levels of TPH (57.35 %), benzene (38.91 %), toluene (27.76 %), ethylbenzene (42.16 %) and xylene (09.62 %) in E. eugeniae at the end of the study. The study has shown that E. eugeniae could be applied as a possible bioremediator in diesel polluted soil.

  5. Heavy metal and chlorinated hydrocarbon residues in California sea loins (Zalophus californianus californianus)

    Energy Technology Data Exchange (ETDEWEB)

    Buhler, D.R.; Claeys, R.R.; Mate, B.R.

    1975-12-01

    Samples of various tissues and organs from healthy California sea lions (Zalophus californianus californianus) and sick animals (apparently with leptospirosis) collected along the central Oregon coast in 1970, 1971, and 1973 were analyzed for total mercury, methylmercury, cadmium, and chlorinated hydrocarbons. Maximum mercury concentrations of 74 to 170 ppM occurred in sea lion liver, but only 1.6 to 3.7 percent of this was present as methylmercury. Cadmium was concentrated primarily in the kidney which contained 7.2 to 12.0 ppM of the metal. Chlorinated hydrocarbon residues in sea lion fat ranged between 253 to 475 ppM DDE, and 21.2 and 34.1 ppM PCB. Although mercury, cadmium, and chlorinated hydrocarbon residues in some of the sick sea lions were significantly higher than those present in healthy animals, it is not possible to relate these differences to the onset of leptospirosis.

  6. Heavy metal, trace element and petroleum hydrocarbon pollution in the Arabian Gulf: Review

    OpenAIRE

    Afnan Mahmood Freije

    2015-01-01

    The Arabian Gulf environmental status was assessed based on studies conducted in Bahrain, Kuwait, Oman, Saudi Arabia, Qatar, and United Arab Emirates (UAE) during 1983–2011. This review examines all sorts of pollutions in the Arabian Gulf area over the last three decades. Approximately 50 published studies were reviewed in order to determine the pollution status in the Arabian Gulf regarding heavy metals and organic substances. Three types of environmental pollutions including marine and coas...

  7. Total petroleum hydrocarbons and trace heavy metals in roadside soils along the Lagos-Badagry expressway, Nigeria.

    Science.gov (United States)

    Adeniyi, Adeleke A; Owoade, Olabisi J

    2010-08-01

    This study reports the level of total petroleum hydrocarbons (TPH) and trace heavy metals (lead, copper, and cadmium) in soil samples collected randomly from Iyana-Iba garage, Lagos State University bus stop, Adeniran Ogunsanya College of Education bus stop, and a control site off Lusada-Atan road, near Crawford University, Igbesa, Ogun state. TPH was estimated gravimetrically after Soxhlet extraction and column clean up, while soil metals were determined by atomic absorption spectrometry using mineral acid digestion. For TPH, the sites have mean values of 19.43+/-1.27, 16.11+/-1.85, and 11.43+/-4.33 mg/g with a control mean value of 0.33+/-0.16 mg/g. For trace heavy metals, cadmium was not detected. However, the mean levels of lead are 4.24+/-3.10, 3.72+/-0.60, and 3.70+/-1.32 microg/g, respectively, whereas mean copper concentrations are 20.63+/-9.02, 19.35+/-3.61, and 16.76+/-3.02 microg/g in all sites, respectively, compared to the control mean of 0.25+/-0.13 and 5.99+/-1.23 microg/g for lead and copper, respectively. Sites studied have higher levels of TPH and metals compared to the control soil samples. This is indicated by a statistically significant difference found between the concentration of analyzed elements in soils collected along Lagos-Badagry expressway and the control site.

  8. Sediment baseline study of levels and sources of polycyclic aromatic hydrocarbons and heavy metals in Lake Nicaragua

    DEFF Research Database (Denmark)

    Scheibye, Katrine; Weisser, Johan; Borggaard, Ole K.;

    2014-01-01

    Selected metals and polycyclic aromatic hydrocarbons (PAHs) were analyzed in sediment samples from 24 sites in Lake Nicaragua sampled May 2010 to provide a baseline of pollution levels. Cu exceeded the Consensus-Based Sediment Quality Guideline (CBSQG) Threshold Effect Concentrations (TECs) at 21...... showed that the CBSQG TECs were exceeded by naphthalene at five sites. The sum concentrations of the 16 US EPA priority PAHs (∑PAH16) ranged from 0.01mgkg(-1)dw to 0.64mgkg(-1)dw. The highest ∑PAH16 concentration was found upstream in River Mayales and the PAH composition revealed a heavy PAH fraction (e....... This study concluded that areas of Lake Nicaragua represent an important pollution baseline for future studies in this lake and other tropical lakes....

  9. Interaction effects of polycyclic aromatic hydrocarbons and heavy metals on a soil microalga, Chlorococcum sp. MM11.

    Science.gov (United States)

    Subashchandrabose, Suresh R; Megharaj, Mallavarapu; Venkateswarlu, Kadiyala; Naidu, Ravi

    2015-06-01

    Environmental risk assessment of sites contaminated with chemicals needs to also consider mixtures of chemicals as these toxicants act more differently in a mixture than when they occur alone. In this study, we describe, for the first time, the use of a full factorial design experiment to evaluate the toxicity of a quaternary mixture comprising two polycyclic aromatic hydrocarbons (PAHs; benzo[a]pyrene (BaP) and phenanthrene (Phe)) and two heavy metals (cadmium (Cd) and lead (Pb)) toward a soil microalga, Chlorococcum sp. MM11. Biomass, in terms of cell number, and proline accumulation were used to evaluate toxicity responses. Factorial analysis of the data revealed statistically significant interaction effects between the mixtures of toxicants on 96-h biomass endpoint, while no significant interaction effects were observed on proline accumulation in the microalga. A comparison of the data on the toxicity of individual chemicals and those of the factorial main effect analysis clearly showed that Cd is more toxic to the alga, followed by BaP, Pb, and Phe. There was a substantial heavy metal accumulation and PAH degradation by the strain MM11 at EC10 and EC50 of the chemical mixtures.

  10. Evaluation of heavy metal and polycyclic aromatic hydrocarbons accumulation in plants from typical industrial sites: potential candidate in phytoremediation for co-contamination.

    Science.gov (United States)

    Sun, Lu; Liao, Xiaoyong; Yan, Xiulan; Zhu, Ganghui; Ma, Dong

    2014-11-01

    The heavy metal and polycyclic aromatic hydrocarbons (PAHs) contents were evaluated in surface soil and plant samples of 18 wild species collected from 3 typical industrial sites in South Central China. The accumulative characteristics of the plant species for both heavy metal and PAHs were discussed. The simultaneous accumulation of heavy metal and PAHs in plant and soil was observed at all the investigated sites, although disparities in spatial distributions among sites occurred. Both plant and soil samples were characterized by high accumulation for heavy metal at smelting site, moderate enrichment at coke power and coal mining sites, whereas high level of PAHs (16 priority pollutants according to US Environmental Protection Agency) at coke power site, followed sequentially by coal mining and smelting sites. Based on the differences of heavy metal and PAH accumulation behaviors of the studied plant species, heavy metal and PAH accumulation strategies were suggested: Pteris vittata L. and Pteris cretica L. for As and PAHs, Boehmeria nivea (L.) Gaud for Pb, As, and PAHs, and Miscanthus floridulu (Labnll.) Warb for Cu and PAHs. These native plant species could be proposed as promising materials for heavy metal and PAHs combined pollution remediation.

  11. Hydrocarbons and heavy metals in fine particulates in oil field air: possible impacts on production of natural silk.

    Science.gov (United States)

    Devi, Gitumani; Devi, Arundhuti; Bhattacharyya, Krishna Gopal

    2016-02-01

    Analyses of fine particulates (PM2.5) from the upper Assam oil fields of India indicated considerable presence of higher hydrocarbons (C22-C35) and heavy metals, Cd, Co, Cr, Cu, Ni, Pb, and Zn. This has raised serious concern for the sustainability of the exotic Muga (Antheraea assama) silk production, which has been a prime activity of a large number of people living in the area. The Muga worm feeds on the leaves of Machilus bombycina plant, and the impacts of air quality on its survival were further investigated by analyzing the leaves of the plant, the plantation soil, and the Muga cocoons. PM2.5 content in the air was much more during the winter due to near calm conditions and high humidity. Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and gas chromatography-mass spectrometer (GC-MS) analysis of PM2.5 showed the presence of higher alkanes (C22-C35) that could be traced to crude oil. Cr, Ni, and Zn were found in higher concentrations in PM2.5, M. bombycina leaves, and the plantation soil indicating a common origin. The winter has been the best period for production of the silk cocoons, and the unhealthy air during this period is likely to affect the production, which is already reflected in the declining yield of Muga cocoons from the area. SEM and protein analyses of the Muga silk fiber produced in the oil field area have exhibited the deteriorating quality of the silk. This is the first report from India on hydrocarbons and associated metals in PM2.5 collected from an oil field and on their possible effects on production of silk by A. assama.

  12. Heavy metal jako subkultura

    OpenAIRE

    KOUTNÁ, Daniela

    2016-01-01

    This bachelor thesis deals with heavy metal subculture. Its aim is to introduce the most important branches and to show broadness of heavy metal. This bachelor thesis describes development and history, briefly shows Czech heavy metal history alongside with the biggest and most popular Czech heavy metal festivals. It shows the most dressing concerns of society against this style.

  13. Novel lipopeptide biosurfactant produced by hydrocarbon degrading and heavy metal tolerant bacterium Escherichia fergusonii KLU01 as a potential tool for bioremediation.

    Science.gov (United States)

    Sriram, Muthu Irulappan; Gayathiri, Shanmugakani; Gnanaselvi, Ulaganathan; Jenifer, Paulraj Stanly; Mohan Raj, Subramanian; Gurunathan, Sangiliyandi

    2011-10-01

    Escherichia fergusonii KLU01, a propitious bacterial strain isolated from oil contaminated soil was identified to be hydrocarbon degrading, heavy metal tolerant and a potent producer of biosurfactant using diesel oil as the sole carbon and energy source. The biosurfactant produced by the strain was characterized to be a lipopeptide. The minimum active dose and critical micelle concentration of the biosurfactant were found as 0.165±0.08 μg and 36 mg/L, respectively. In spite of being an excellent emulsifier, the biosurfactant showed an incredible stability at extremes of temperature, pH and at various concentrations of NaCl, CaCl₂ and MgCl₂. Also the bacterium manifested tolerance towards Manganese, Iron, Lead, Nickel, Copper and Zinc. The strain emerges as a new class of biosurfactant producer with potential environmental and industrial applications, especially in hydrocarbon degradation and heavy metal bioremediation.

  14. A permeable reactive barrier (PRB) media sequence for the remediation of heavy metal and hydrocarbon contaminated water: A field assessment at Casey Station, Antarctica.

    Science.gov (United States)

    Statham, Tom M; Stark, Scott C; Snape, Ian; Stevens, Geoffrey W; Mumford, Kathryn A

    2016-03-01

    A field trial was conducted at Casey Station, Antarctica to assess the suitability of a permeable reactive barrier (PRB) media sequence for the remediation of sites containing both hydrocarbon and heavy metal contamination. An existing PRB was modified to assess a sequence consisting of three sections: (i) Nutrient release/hydrocarbon sorption using ZeoPro™ and granular activated carbon; (ii) Phosphorus and heavy metal capture by granular iron and sand; (iii) Nutrient and excess iron capture by zeolite. The media sequence achieved a greater phosphorus removal capacity than previous Antarctic PRB configurations installed on site. Phosphorus concentrations were reduced during flow through the iron/sand section and iron concentrations were reduced within the zeolite section. However, non-ideal flow was detected during a tracer test and supported by analysis of media and liquid samples from the second summer of operation. Results indicate that the PRB media sequence trialled might be appropriate for other locations, especially less environmentally challenging contaminated sites.

  15. Comparative bioremediation of heavy metals and petroleum hydrocarbons co-contaminated soil by natural attenuation, phytoremediation, bioaugmentation and bioaugmentation-assisted phytoremediation.

    Science.gov (United States)

    Agnello, A C; Bagard, M; van Hullebusch, E D; Esposito, G; Huguenot, D

    2016-09-01

    Biological remediation technologies are an environmentally friendly approach for the treatment of polluted soils. This study evaluated through a pot experiment four bioremediation strategies: a) natural attenuation, b) phytoremediation with alfalfa (Medicago sativa L.), c) bioaugmentation with Pseudomonas aeruginosa and d) bioaugmentation-assisted phytoremediation, for the treatment of a co-contaminated soil presenting moderate levels of heavy metals (Cu, Pb and Zn at 87, 100 and 110mgkg(-1) DW, respectively) and petroleum hydrocarbons (3800mgkg(-1) DW). As demonstrated by plant biomass and selected physiological parameters alfalfa plants were able to tolerate and grow in the co-contaminated soil, especially when soil was inoculated with P. aeruginosa, which promoted plant growth (56% and 105% increase for shoots and roots, respectively) and appeared to alleviate plant stress. The content of heavy metals in alfalfa plants was limited and followed the order: Zn>Cu>Pb. Heavy metals were mainly concentrated in plant roots and were poorly translocated, favouring their stabilization in the root zone. Bioaugmentation of planted soil with P. aeruginosa generally led to a decrease of plant metal concentration and translocation. The highest degree of total petroleum hydrocarbon removal was obtained for bioaugmentation-assisted phytoremediation treatment (68%), followed by bioaugmentation (59%), phytoremediation (47%) and natural attenuation (37%). The results of this study demonstrated that the combined use of plant and bacteria was the most advantageous option for the treatment of the present co-contaminated soil, as compared to natural attenuation, bioaugmentation or phytoremediation applied alone.

  16. Spatial and Temporal Distribution of Polycyclic Aromatic Hydrocarbons and Heavy Metals in Stormwater Detention Basin Sediments

    Science.gov (United States)

    Schifman, L. A.; Kasaraneni, V. K.; Boving, T. B.; Craver, V.

    2015-12-01

    Stormwater runoff is a conduit for several pollutants such as polycyclic aromatic hydrocarbons (PAHs) into surface and ground water bodies. The control of runoff and pollutants is typically addressed by best management practices, such as retention/detention ponds. While the effectiveness of catchment basins in runoff volume reduction and removal of some contaminants has been established, very little is known about contaminant fate within these structures. Particularly in coastal regions and places with shallow groundwater tables PAH accumulation in the bottom sediments poses a potential threat for groundwater contamination. The concentrations of PAHs accumulated in the sediments of these catchment basins will primarily depend on the sources of runoff origin and the surrounding land use. Here, five stormwater catchment basins along the I-95 corridor in Rhode Island were selected based on the stormwater runoff origin and land use (industrial, urban, highway, and commercial). To study the stratification of PAHs one foot sediment cores were collected and analyzed for 17 PAHs (16 EPA parent PAH and Retene). The concentrations of PAHs in sediments of detention ponds in urban and industrial land use areas ranged from 20 μg/g to 200 μg/g. Generally higher concentrations of contaminants were found in sediments near the pond inlet and a decreasing concentration gradient is observed laterally and vertically throughout the pond. To compare stormwater ponds in various land use settings a new index based on sediment contamination, pond size and age, and catchment area will be presented. Further, it will be investigated whether BMP maintenance has to be targeted towards pollutant removal to maintain an effective stormwater treatment system.

  17. Field reconnaissance and estimation of petroleum hydrocarbon and heavy metal contents of soils affected by the Ebocha-8 oil spillage in Niger Delta, Nigeria.

    Science.gov (United States)

    Osuji, Leo C; Onojake, Chukunedum M

    2006-04-01

    Field reconnaissance of the Ebocha-8 oil spill-affected site at Obiobi/Obrikom in the Niger Delta region of Nigeria was carried out to assess the extent of damage to the terrestrial ecosystem and delimit the epicenter of oil spillage. Following three successive reconnaissance surveys, the area to be sampled was delimited (200 x 200 m2), and soil samples were collected using the grid method from three replicate quadrats at two depths, surface (0-15 cm) and subsurface (15-30 cm). A geographically similar area located 50 m adjacent to the oil-polluted area was used as a reference (control) site. Total hydrocarbon content (THC) and heavy metal concentrations were later determined in the laboratory by extraction and spetrophotemetric techniques. Generally, the THC of soils at surface and subsurface depths of the oil-polluted plots was 2.06 x 10(4) +/- 4.97 x 10(3) mg/kg and 1.67 x 10(3) +/- 3.61 x 10(2) mg/kg soil, respectively, (no overlap in standard errors at 95% confidence limit) while concentrations of heavy metals(Pb, Cd, V, Cu and Ni) were enhanced, especially at the surface. The high levels of THC and heavy metals may predispose the site, which hitherto served as arable agricultural land, to impaired fertility and possible conflagration. When concentrations of heavy metals reach the levels obtained in this study, they may become toxic to plants or possibly bio-accumulate, thus leading to toxic reactions along the food chain. While the spilled-oil may have contributed to the enhanced levels of the metals in the affected soils, physico-chemical properties of the soils, mobility of metals, and the intense rainfall and flooding that preceded the period of study may have also contributed in part to their enhanced concentrations. The presence of high hydrocarbon content may cause oxygen deprivation, which may result in the death of soil fauna by asphyxiation. There is, therefore, an urgent need to clear the affected site of these excess hydrocarbon deposits so as to

  18. Concentrations of heavy metals and polycyclic aromatic hydrocarbons in needles of Masson pine (Pinus massoniana L.) growing nearby different industrial sources.

    Science.gov (United States)

    Sun, Fangfang; Wen, Dazhi; Kuang, Yuanwen; Li, Jiong; Li, Jianli; Zuo, Weidong

    2010-01-01

    Emissions from industrial activities pose a serious threat to human health and impose the need for monitoring both inorganic and organic pollutants in industrial areas. We selected Masson pine (Pinus massoniana L.) as potential biomonitor and collected the current (C) and previous year (C+1) needles from three industrial sites dominated by petrochemical, ceramics manufacturing, and iron and steel smelting plants and one remote site to determine heavy metals (Cu, Cd, Pb, Zn, Cr, Ni and Co) and polycyclic aromatic hydrocarbons (PAHs) in unwashed and water-washed needles. Both unwashed and washed C+1 needles showed generally higher concentrations of heavy metals and PAHs than C needles, although the washed needles more clearly spotlighted the accumulation effect of PAHs over exposure time. Water-washing resulted in a significant decrease in needle PAH concentrations with more significant effects shown in C needles. By contrast, needle heavy metal concentrations were much less affected by washing. Although heavy metals and PAHs might differ in adsorption and uptake strategies, their higher concentrations in the needles at the industrial sites indicated conspicuous contamination due to industrial emissions there. The PAH distribution patterns in pine needles accorded with the real types of energy consumption in the study sites and were efficiently used for pinpointing local pollutant sources.

  19. The effects of heavy metals and their interactions with polycyclic aromatic hydrocarbons on the oxidative stress among coke-oven workers

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Tian; Feng, Wei; Kuang, Dan; Deng, Qifei [Department of Occupational and Environmental Health, State Key Laboratory of Environmental Health (Incubating), School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan (China); Zhang, Wangzhen [Institute of Industrial Health, Wuhan Iron & Steel (Group) Corporation, Wuhan 430070, China. (China); Wang, Suhan; He, Meian; Zhang, Xiaomin; Wu, Tangchun [Department of Occupational and Environmental Health, State Key Laboratory of Environmental Health (Incubating), School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan (China); Guo, Huan, E-mail: ghuan5011@hust.edu.cn [Department of Occupational and Environmental Health, State Key Laboratory of Environmental Health (Incubating), School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan (China)

    2015-07-15

    Heavy metals and polycyclic aromatic hydrocarbons (PAHs) are predominate toxic constituents of particulate air pollution that may be related to the increased risk of cardiopulmonary events. We aim to investigate the effects of the toxic heavy metals (arsenic, As; cadmium, Cd; chromium, Cr; nickel, Ni; and lead, Pb), and their interactions with PAHs on oxidative stress among coke-oven workers. A total of 1333 male workers were recruited in this study. We determined their urinary levels of As, Cd, Cr, Ni, Pb, twelve PAH metabolites, 8-hydroxydeoxyguanosine (8-OHdG), and 8-iso-prostaglandin-F2α (8-iso-PGF2α). Multivariate linear regression models were used to analyze the effects of these metals and their interactions with PAHs on 8-OHdG and 8-iso-PGF2α levels. It was found that only urinary As and Ni showed marginal or significant positive linear dose-dependent effects on 8-OHdG in this study population, especially among smokers (β=0.103, P=0.073 and β=0.110, P=0.002, respectively). After stratifying all participants by the quartiles of ΣOH-PAH, all five metals showed linear association with 8-OHdG in the highest quartile subgroup (Q4) of ΣOH-PAHs. However, these five urinary metals showed significantly consistent linear associations with 8-iso-PGF2α in all subjects and each stratum. Urinary ΣOH-PAHs can significant modify the effects of heavy metals on oxidative stress, while co-exposure to both high levels of ΣOH-PAHs and heavy metals render the workers with highest 8-OHdG and 8-iso-PGF2α (all P{sub interaction}≤0.005). This study showed evidence on the interaction effects of heavy metals and PAHs on increasing the oxidative stress, and these results warrant further investigation in more longitudinal studies. - Highlights: • Heavy metals and PAHs are predominate toxic constituents of particulate matters. • Urinary As and Ni showed linear dose-dependent effects on 8-OHdG and 8-iso-PGF2α. • PAHs significant interact with toxic metal in increasing 8

  20. Monitoring of ground water quality and heavy metals in soil during large scale bioremediation of petroleum hydrocarbon contaminated waste in India: case studies

    Directory of Open Access Journals (Sweden)

    Ajoy Kumar Mandal

    2014-10-01

    Full Text Available Bioremediation using microbes has been well accepted as an environmentally friendly and economical treatment method for disposal of hazardous petroleum hydrocarbon contaminated waste (oily waste and this type of bioremediation has been successfully conducted in laboratory and on a pilot scale in various countries, including India. Presently there are no federal regulatory guidelines available in India for carrying out field-scale bioremediation of oily waste using microbes. The results of the present study describe the analysis of ground water quality as well as selected heavy metals in oily waste in some of the large-scale field case studies on bioremediation of oily waste (solid waste carried out at various oil installations in India. The results show that there was no contribution of oil and grease and selected heavy metals to the ground water in the nearby area due to adoption of this bioremediation process. The results further reveal that there were no changes in pH and EC of the groundwater due to bioremediation. In almost all cases the selected heavy metals in residual oily waste were within the permissible limits as per Schedule – II of Hazardous Waste Management, Handling and Transboundary Movement Act, Amendment 2008, (HWM Act 2008, by the Ministry of Environment and Forests (MoEF, Government of India (GoI.

  1. Soil heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Sherameti, Irena [Jena Univ. (Germany). Inst. fuer Allgemeine Botanik und Pflanzenphysiologie; Varma, Ajit (eds.) [Amity Univ., Uttar Pradesh (India). Amity Inst. of Microbial Technology; Amity Science, Technology and Innovation Foundation, Noida, UP (India)

    2010-07-01

    Human activities have dramatically changed the composition and organisation of soils. Industrial and urban wastes, agricultural application and also mining activities resulted in an increased concentration of heavy metals in soils. How plants and soil microorganisms cope with this situation and the sophisticated techniques developed for survival in contaminated soils is discussed in this volume. The topics presented include: the general role of heavy metals in biological soil systems; the relation of inorganic and organic pollutions; heavy metal, salt tolerance and combined effects with salinity; effects on abuscular mycorrhizal and on saprophytic soil fungi; heavy metal resistance by streptomycetes; trace element determination of environmental samples; the use of microbiological communities as indicators; phytostabilization of lead polluted sites by native plants; effects of soil earthworms on removal of heavy metals and the remediation of heavy metal contaminated tropical land. (orig.)

  2. Process to separate alkali metal salts from alkali metal reacted hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Howard; Alvare, Javier; Larsen, Dennis; Killpack, Jeff

    2017-06-27

    A process to facilitate gravimetric separation of alkali metal salts, such as alkali metal sulfides and polysulfides, from alkali metal reacted hydrocarbons. The disclosed process is part of a method of upgrading a hydrocarbon feedstock by removing heteroatoms and/or one or more heavy metals from the hydrocarbon feedstock composition. This method reacts the oil feedstock with an alkali metal and an upgradant hydrocarbon. The alkali metal reacts with a portion of the heteroatoms and/or one or more heavy metals to form an inorganic phase containing alkali metal salts and reduced heavy metals, and an upgraded hydrocarbon feedstock. The inorganic phase may be gravimetrically separated from the upgraded hydrocarbon feedstock after mixing at a temperature between about 350.degree. C. to 400.degree. C. for a time period between about 15 minutes and 2 hours.

  3. Assessment and source identification of pollution risk for touristic ports: Heavy metals and polycyclic aromatic hydrocarbons in sediments of 4 marinas of the Apulia region (Italy).

    Science.gov (United States)

    Mali, Matilda; Dell'Anna, Maria Michela; Mastrorilli, Piero; Damiani, Leonardo; Piccinni, Alberto Ferruccio

    2017-01-30

    The Apulia region in Italy has the longest Adriatic coastline; thus, maritime tourism is the driving force for its economic development. Pollution risk for four representative touristic ports of the region was assessed by determining the concentrations of 10 metals, 16 polycyclic aromatic hydrocarbons (PAHs) congeners, and the main nutrients. The cumulative mean Effects Range-Median quotient (mERMq) was used to assess the hazard degree, while the distribution patterns and content ratios of different PAH sediment concentrations were investigated to identify the pollution sources. Principal component analyses indicated an anomalous pollution trend for one of the small touristic ports assessed; this trend emerged from contamination by heavy metals and PAHs to a larger extent than expected, considering the main activity in this port, especially in its inner basin. The reason of this anomaly is thought to be the hydrodynamic and/or other stress factors. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Bioremediation of soils contaminated with polycyclic aromatic hydrocarbons, petroleum, pesticides, chlorophenols and heavy metals by composting: Applications, microbes and future research needs.

    Science.gov (United States)

    Chen, Ming; Xu, Piao; Zeng, Guangming; Yang, Chunping; Huang, Danlian; Zhang, Jiachao

    2015-11-01

    Increasing soil pollution problems have caused world-wide concerns. Large numbers of contaminants such as polycyclic aromatic hydrocarbons (PAHs), petroleum and related products, pesticides, chlorophenols and heavy metals enter the soil, posing a huge threat to human health and natural ecosystem. Chemical and physical technologies for soil remediation are either incompetent or too costly. Composting or compost addition can simultaneously increase soil organic matter content and soil fertility besides bioremediation, and thus is believed to be one of the most cost-effective methods for soil remediation. This paper reviews the application of composting/compost for soil bioremediation, and further provides a critical view on the effects of this technology on microbial aspects in contaminated soils. This review also discusses the future research needs for contaminated soils.

  5. GENOTOXICITY AND BIOCONCENTRATION OF POLYCYCLIC AROMATIC HYDROCARBONS AND HEAVY METALS IN LEUCISCUS CEPHALUS FROM PESCARA RIVER (ABRUZZO - ITALY: AN INTEGRATED APPROACH

    Directory of Open Access Journals (Sweden)

    Federica Piccoli

    2010-04-01

    Full Text Available The aim of the present study was to investigate the water quality and the ecosystem health of a segment of Pescara river (Abruzzo-Italy with the aid of an integrated approach. Sixteen priority polycyclic aromatic hydrocarbons and heavy metals were determinated in water and chub samples in order to calculate the bioconcentration factor. Biochemical, physical and microbiological characterisation were also carried out on water samples. Moreover, real and synergic effects of water pollution on biota were investigated by genotoxicological tests. Water samples were tested by Salmonella mutagenicity assay, whereas micronucleus assay on chub  was used to evaluate environmental genotoxic effects on fish. The characterisation of  water samples did not reveal any relevant contamination of Pescara river, but some analytical results obtained for biota were remarkable. In particular, the comparison between the site downstream from the industrial area of Chieti and the control site showed significant differences in chub micronuclei frequencies.

  6. Assessment of heavy metal and petroleum hydrocarbon contamination in the Sultanate of Oman with emphasis on harbours, marinas, terminals and ports.

    Science.gov (United States)

    Jupp, Barry P; Fowler, Scott W; Dobretsov, Sergey; van der Wiele, Henk; Al-Ghafri, Ahmed

    2017-08-15

    The assessment here includes data on levels of contaminants (petroleum hydrocarbons and heavy metals) in sediments and biomonitor organisms, including the eulittoral rock oyster Saccostrea cucullata and subtidal biomonitors, the barnacle Balanus trigonus and the antipatharian coral Antipathes sp., at harbours, marinas, terminals and large ports along the coastline of Oman. TBT levels in harbour and port sediments up to a maximum of 100ppb TBT dry weight are highlighted. Oysters contained concentrations up to 367ppm mg TPH/kg dry weight. The maximum levels of Cd, Cu, Pb and Zn were found in the subtidal sediments and barnacles at the oil tanker loading Single Buoy Mooring stations in Mina Al Fahal. In general, the levels of most of the contaminants analysed are at low to moderate concentrations compared to those in highly contaminated sites such as shipyards and dry docks, but continued monitoring is recommended especially during any dredging campaigns. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Depressed height gain of children associated with intrauterine exposure to polycyclic aromatic hydrocarbons (PAH) and heavy metals: the cohort prospective study.

    Science.gov (United States)

    Jedrychowski, Wiesław A; Perera, Frederica P; Majewska, Renata; Mrozek-Budzyn, Dorota; Mroz, Elżbieta; Roen, Emily L; Sowa, Agata; Jacek, Ryszard

    2015-01-01

    Fetal exposure to environmental toxicants may program the development of children and have long-lasting health impacts. The study tested the hypothesis that depressed height gain in childhood is associated with prenatal exposure to airborne polycyclic aromatic hydrocarbons (PAH) and heavy metals (lead and mercury). The study sample comprised 379 children born to non-smoking mothers among whom a total of 2011 height measurements were carried out over the 9-year follow-up period. Prenatal airborne PAH exposure was assessed by personal air monitoring of the mother in the second trimester of pregnancy and heavy metals were measured in cord blood. At the age of 3 residential air monitoring was done to evaluate the level of airborne PAH, and at the age 5 the levels of heavy metals were measured in capillary blood. The effect estimates of prenatal PAH exposure on height growth over the follow-up were adjusted in the General Estimated Equation (GEE) models for a wide set of relevant covariates. Prenatal exposure to airborne PAH showed a significant negative association with height growth, which was significantly decreased by 1.1cm at PAH level above 34.7 ng/m(3) (coeff.=-1.07, p=0.040). While prenatal lead exposure was not significantly associated with height restriction, the effect of mercury was inversely related to cord blood mercury concentration above 1.2 μg/L (coeff.=-1.21, p=0.020), The observed negative impact of prenatal PAH exposure on height gain in childhood was mainly mediated by shorter birth length related to maternal PAH exposure during pregnancy. The height gain deficit associated with prenatal mercury exposure was not seen at birth, but the height growth was significantly slower at later age.

  8. Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) in soils of different land uses in Erbil metropolis, Kurdistan Region, Iraq.

    Science.gov (United States)

    Amjadian, Keyvan; Sacchi, Elisa; Rastegari Mehr, Meisam

    2016-11-01

    Urban soil contamination is a growing concern for the potential health impact on the increasing number of people living in these areas. In this study, the concentration, the distribution, the contamination levels, and the role of land use were investigated in Erbil metropolis, the capital of Iraqi Kurdistan. A total of 74 soil samples were collected, treated, and analyzed for their physicochemical properties, and for 7 heavy metals (As, Cd, Cr, Cu, Fe, Pb, and Zn) and 16 PAH contents. High concentrations, especially of Cd, Cu Pb, and Zn, were found. The Geoaccumulation index (Igeo), along with correlation coefficients and principal component analysis (PCA) showed that Cd, Cu, Pb, and Zn have similar behaviors and spatial distribution patterns. Heavy traffic density mainly contributed to the high concentrations of these metals. The total concentration of ∑PAHs ranged from 24.26 to 6129.14 ng/g with a mean of 2296.1 ng/g. The PAH pattern was dominated by 4- and 5-ring PAHs, while diagnostic ratios and PCA indicated that the main sources of PAHs were pyrogenic. The toxic equivalent (TEQ) values ranged from 3.26 to 362.84 ng/g, with higher values in central parts of the city. A statistically significant difference in As, Cd, Cu, Pb, Zn, and ∑PAH concentrations between different land uses was observed. The highest As concentrations were found in agricultural areas while roadside, commercial, and industrial areas had the highest Cd, Cu, Pb, Zn, and ∑PAH contents.

  9. Retention of heavy metals and poly-aromatic hydrocarbons from road water in a constructed wetland and the effect of de-icing

    KAUST Repository

    Tromp, Karin

    2012-02-01

    A full-scale remediation facility including a detention basin and a wetland was tested for retention of heavy metals and Poly-Aromatic Hydrocarbons (PAHs) from water drained from a motorway in The Netherlands. The facility consisted of a detention basin, a vertical-flow reed bed and a final groundwater infiltration bed. Water samples were taken of road water, detention basin influent and wetland effluent. By using automated sampling, we were able to obtain reliable concentration averages per 4-week period during 18 months. The system retained the PAHs very well, with retention efficiencies of 90-95%. While environmental standards for these substances were surpassed in the road water, this was never the case after passage through the system. For the metals the situation was more complicated. All metals studied (Cu, Zn, Pb, Cd and Ni) had concentrations frequently surpassing environmental standards in the road water. After passage through the system, most metal concentrations were lower than the standards, except for Cu and Zn. There was a dramatic effect of de-icing salts on the concentrations of Cu, Zn, Cd and Ni, in the effluent leaving the system. For Cu, the concentrations even became higher than they had ever been in the road water. It is advised to let the road water bypass the facility during de-icing periods. © 2011 Elsevier B.V.

  10. Heavy Metal Fluoride Glasses.

    Science.gov (United States)

    1987-04-01

    i 2N E ihhhhh1112h MEmhhhhEEEohhhhE I.’....momo 111111111’-20 LA ’Ll2. AFWL-TR-86-37 AFWL-TR- 86-37 oT C ,l C ’-’ N HEAVY METAL FLUORIDE GLASSES 0nI...Secwrit CkasmfcationJ HEAVY METAL FLUORIDE GLASSES 12. PERSONAL AUTHOR(S) Reisfield, Renata; and Eyal, Mrek 13. TYPE OF REPORT 113b. TIME COVERED 114...glasses containing about 50 mole% of ZrF4 [which can be replaced by HfF 4 or TIF 4 (Refs. 1-3) or heavy metal fluorides based on PbF2 and on 3d-group

  11. Upgrading of petroleum oil feedstocks using alkali metals and hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Howard

    2014-09-09

    A method of upgrading an oil feedstock by removing heteroatoms and/or one or more heavy metals from the oil feedstock composition. This method reacts the oil feedstock with an alkali metal and an upgradant hydrocarbon. The alkali metal reacts with a portion of the heteroatoms and/or one or more heavy metals to form an inorganic phase separable from the organic oil feedstock material. The upgradant hydrocarbon bonds to the oil feedstock material and increases the number of carbon atoms in the product. This increase in the number of carbon atoms of the product increases the energy value of the resulting oil feedstock.

  12. Upgrading of petroleum oil feedstocks using alkali metals and hydrocarbons

    Science.gov (United States)

    Gordon, John Howard

    2014-09-09

    A method of upgrading an oil feedstock by removing heteroatoms and/or one or more heavy metals from the oil feedstock composition. This method reacts the oil feedstock with an alkali metal and an upgradant hydrocarbon. The alkali metal reacts with a portion of the heteroatoms and/or one or more heavy metals to form an inorganic phase separable from the organic oil feedstock material. The upgradant hydrocarbon bonds to the oil feedstock material and increases the number of carbon atoms in the product. This increase in the number of carbon atoms of the product increases the energy value of the resulting oil feedstock.

  13. Coke industry and steel metallurgy as the source of soil contamination by technogenic magnetic particles, heavy metals and polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Rachwał, Marzena; Magiera, Tadeusz; Wawer, Małgorzata

    2015-11-01

    Application of integrated magnetic, geochemical and mineralogical methods for qualitative and quantitative assessment of forest topsoils exposed to the industrial emissions was the objective of this manuscript. Volume magnetic susceptibility (κ) in three areas of southern Poland close to the coke and metallurgical plants was measured directly in the field. Representative topsoil samples were collected for further chemical and mineralogical analyses. Topsoil magnetic susceptibility in the studied areas depended mainly on the content of technogenic magnetic particles (TMPs) and decreased downwind at increasing distance from the emitters. In the vicinity of coking plants a high amount of polycyclic aromatic hydrocarbons (PAHs) was observed, especially the most carcinogenic ones with four- and five-member rings. No significant concentration of TMPs (estimated on the base of κ values) and heavy metals (HM) was observed in area where the coke plant was the only pollution source. In areas with both coke and metallurgical industry, higher amounts of TMPs, PAHs and HM were detected. Morphological and mineralogical analyses of TMPs separated from contaminated soil samples revealed their high heterogeneity in respect of morphology, grain size, mineral and chemical constitution. Pollution load index and toxicity equivalent concentration of PAHs used for soil quality assessment indicated its high level of pollution.

  14. Hydrocarbons and heavy metals in the different sewer deposits in the ‘Le Marais’ catchment (Paris, France): stocks, distributions and origins

    OpenAIRE

    Rocher, Vincent; Azimi, Sam; Moilleron, Régis; Chebbo, Ghassan

    2004-01-01

    International audience; The knowledge of the pollution stored in combined sewers is of prime importance in terms of management of wet weather flow pollution since sewer deposits play a significant role as source of pollution in combined sewer overflows. This work, which focused on the hydrocarbon (aliphatic and aromatic hydrocarbons) and metallic (Fe, Zn, Pb, Cu and Cd) pollution fixed to the different kinds of sewer deposits (gross bed sediment wGBSx, organic layer wOLx and biofilm), was per...

  15. Bioaccumulation and Food Chain Transfer of Polycyclic Aromatic Hydrocarbons and Heavy Metals: A Laboratory and Field Investigation.

    Science.gov (United States)

    1992-10-14

    and runs comprising the majority of stream habitat . Flow is dependent upon snowmelt with high flow occurring during spring runoff. Riparian canopy is...attempted to collect three replicates for each taxa at each station. However, as a result of habitat requirements, life history, and/or metal toxicity...differences in Zn, Cd, and Pb accumulation by freshwater algae and bryophytes , Hydrobiologgia. 175:1-11. Krantzberg, G. 1989. Metal accumulation by

  16. Alternatives for recovering metals from spent catalysts for hydrotreating of heavy hydrocarbons: a case study; Alternativas para la recuperacion de metales a partir de catalizadores gastados del hidrotratamiento de hidrocarburos pesados: un caso de estudio

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Fernando; Ramirez, Sergio; Ancheyta, Jorge; Mavil, Martha [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico)]. E-mail: jancheyt@imp.mx

    2008-05-15

    The increasing production of spent hydrotreating catalysts used for processing heavy hydrocarbons and the problems related to their disposal are described in this work. These catalysts contain important amounts of heavy metals such as molybdenum (Mo), nickel (Ni), cobalt (Co) and vanadium (V), which can be recovered and hence an economical benefit may be obtained. The results of experimental tests for alkaline leaching (NaOH) to recover V and Mo, and the effect of operating conditions on metal recovery are also presented. The results show that, in general, the highest recovery of Mo is obtained at pH 8.5 and leaching time of 12 hours, while in the case of V, the highest recovery is observed at pH 9.0 and 8 hours. In both cases, the leaching solution contained 10 wt % alkaline. Based on the experimental information and data from a commercial plant, a preliminary economy study was developed, in which the expected economical benefits of metals recovery from spent catalysts used for hydrotreating heavy hydrocarbon are estimated. [Spanish] En el presente trabajo se describe la problematica de la creciente produccion de catalizadores gastados de los procesos de hidrotratamiento de hidrocarburos pesados. Estos catalizadores contienen cantidades importantes de metales pesados como molibdeno (Mo), niquel (Ni), cobalto (Co) y vanadio (V), que son susceptibles de recuperarse y obtener con ello un beneficio economico. Tambien se presentan resultados de pruebas experimentales de lixiviacion alcalina (NaOH) para la recuperacion de V y Mo, y el efecto de las variables de operacion sobre la recuperacion de metales. En general, se encontro que las mejores recuperaciones de Mo fueron a pH de 8.5 y 12 h, mientras que para el V fueron a pH de 9.0 y 8 h, ambos a una concentracion del agente lixiviante de 10% en peso. Con base en la informacion experimental obtenida y datos de una planta industrial se presenta un estudio economico preliminar, en el que se estiman los beneficios

  17. Heavy metals ,polycyclic aromatic hydrocarbons and organochlorine pesticides in the surface sediments of mangrove swamps from coastal sites along the Leizhou Peninsula ,South China

    Institute of Scientific and Technical Information of China (English)

    TANG Yijie; FANG Zhanqiang; YU Shixiao

    2008-01-01

    Contents of heavy metals,polycyclic aromatic hydrocarbons (PAHs),diehlorodiphenyltrichloroethanes (DDTs) and hexaehlorcy- clohexanes (HCHs) in surface sediments from mangrove areas of the Leizhou Peninsula were analyzed in July and November 2005.Risk assessment criteria applied by Long E R et al.(1995) and Long E D et al.(1998) (effects range low,ERL;effects range mean,ERM) of chemicals in sediments from the gulf or estuary were used to assess the potential ecological risks of heavy metals,PAHs,DDTs and HCHs to aquatic organisms in the studied area.The results indicated that the average contents of zinc, nickel,chromium,lead,copper,arsenic and mercury were (61.97±55.87),(59.99±39.01 ),(47.93±28.37), (26.64±13.00),(23.45±41.96),(9.32±3.62),(0.14±0.18) mg/kg in dry weight in the sediment samples col- lected from five studied sites in the Leizhou Peninsula,respectively.Cadmium was not calculated due to its content being below the detection limit ( < 0.3 mg/kg).The average levels of Cr,Cu,Ni,Pb,Zn and Hg exceed their background values.The av- erage contents of Ni were higher than ERM.The contents of PAHs in the sediments from the five studied sites were (79.78± 43.70) ng/g in dry weight,far lower than ERL(4 022 ng/g).The contents of DDE,DDD and DDTs in the sediments from five studied sites were (2.60±4.68),( 17.52±27.25),(27.78±46.64) ng/g in dry weight respectively,clearly higher than ERL,and the average contents of DDT were (7.66±15.93) ng/g in dry weight,much higher than ERM.HCHs could be de- tected in the sediments only from Gaoqiao sampling site,with the average contents (0.07±0.08) ng/g in dry weight.

  18. Hard rock, heavy metal, metal

    OpenAIRE

    Hein, Fabien

    2011-01-01

    Le terme générique metal désigne une multitude de genres et de sous-genres musicaux issus de l’appariement du hard rock et du heavy metal. Il résulte d’une agrégation sémantique consécutive de l’érosion et de l’interpénétration de ces termes au cours des années 1980. Leurs modèles canoniques, respectivement représentés par les groupes Led Zeppelin et Black Sabbath, se sont progressivement dilués sous l’effet d’une filiation particulièrement effervescente et féconde : black, thrash, doom, prog...

  19. Heavy Metal Factory

    Science.gov (United States)

    Löbling, Lisa

    2017-07-01

    The metal enrichment in the cosmic circuit of matter is dominated by the yields of asymptotic giant branch (AGB) nucleosynthesis, that are blown back into the interstellar medium just before these stars die as white dwarfs. To establish constraints on AGB processes, spectral analyses of hot post-AGB stars are mandatory. These show that such stars are heavy metal factories due to the AGB s-process. The Virtual Observatory service TheoSSA offers access to synthetic stellar spectra calculated with our Tübingen non-local thermodynamic equilibrium model-atmosphere package that are suitable for the analysis of hot post-AGB stars.

  20. Hydrocarbons and heavy metals fixed to the lift station sediments of the Paris agglomeration; Hydrocarbures et metaux lourds associes aux sediments de stations de relevage de l'agglomeration parisienne

    Energy Technology Data Exchange (ETDEWEB)

    Rocher, V.; Gasperi, J.; Azimi, S.; Moilleron, R. [Paris-12 Univ., CEREVE, Faculte de Sciences et Technologie, 94 - Creteil (France); Celaudon, Th. [Mairie de Paris, Dir. de la Voirie et des Deplacements, 94 - Ivry sur Seine (France); Chebbo, G. [Ecole Nationale des Ponts et Chaussees, CEREVE, 77 - Marne la Vallee (France)

    2004-07-01

    During rain events, great quantities of hydrocarbons (aliphatic and aromatic) and heavy metals enter the combined sewer by way of roof and road runoff. The decrease of these inputs, necessary to the combined sewer overflow reduction, requires knowledge of pollutant nature and origin. This work, focused on lift station sediments, aims to characterised the contents and fingerprints of pollutants associated to road runoff. Hydrocarbon contamination levels, calculated at 80 and 24 {mu}g.g-1 dw for aliphatic and aromatic compounds, are of the same order of magnitude than those reported in the literature. In the same way, heavy metal contamination levels are in a good agreement with previous studies. Nevertheless, a decrease of Pb contents, induced by the recent restriction of the Pb traffic emission, and an increase of Cu contents, probably linked to the occurrence of intensive brake lining abrasion, were noticed. Moreover, hydrocarbon fingerprints underline the variability of the hydrocarbon origin. Indeed, aliphatic distributions reflect the combination of biologic (vegetal) and petrogenic (lubricating oils, gasoline, etc.) inputs, while aromatic distributions indicate a major pyrolytic origin with traces of petrogenic contaminations. (authors)

  1. Patterns of benthic bacterial diversity in coastal areas contaminated by heavy metals, Polycyclic Aromatic Hydrocarbons (PAHs and Polychlorinated Biphenyls (PCBs

    Directory of Open Access Journals (Sweden)

    Grazia Marina eQuero

    2015-10-01

    Full Text Available Prokaryotes in coastal sediments are fundamental players in the ecosystem functioning and regulate processes relevant in the global biogeochemical cycles. Nevertheless, knowledge on benthic microbial diversity patterns across spatial scales, or as function to anthropogenic influence, is still limited. We investigated the microbial diversity in two of the most chemically polluted sites along the coast of Italy. One site is the Po River Prodelta (Northern Adriatic Sea, which receives contaminant discharge from one of the largest rivers in Europe. The other site, the Mar Piccolo of Taranto (Ionian Sea, is a chronically-polluted area due to steel production plants, oil refineries, and intense maritime traffic. We collected sediments from 30 stations along gradients of contamination, and studied prokaryotic diversity using Illumina sequencing of amplicons of a 16S rDNA gene fragment. The main sediment variables and the concentration of eleven metals, PCBs and PAHs were measured. Chemical analyses confirmed the high contamination in both sites, with concentrations of PCBs particularly high and often exceeding the sediment guidelines. The analysis of more than 3 millions 16S rDNA sequences showed that richness decreased with higher contamination levels. Multivariate analyses showed that contaminants significantly shaped community composition. Assemblages differed significantly between the two sites, but showed wide within-site variations related with spatial gradients in the chemical contamination, and the presence of a core set of OTUs shared by the two geographically distant sites. A larger importance of PCB-degrading taxa was observed in the Mar Piccolo, suggesting their potential selection in this historically-polluted site. Our results indicate that sediment contamination by multiple contaminants significantly alter benthic prokaryotic diversity in coastal areas, and suggests considering the potential contribution of the resident microbes to

  2. Ecological and human health hazards of heavy metals and polycyclic aromatic hydrocarbons (PAHs) in road dust of Isfahan metropolis, Iran.

    Science.gov (United States)

    Soltani, Naghmeh; Keshavarzi, Behnam; Moore, Farid; Tavakol, Tahereh; Lahijanzadeh, Ahmad Reza; Jaafarzadeh, Nemat; Kermani, Maryam

    2015-02-01

    This study investigates trace elements and PAHs content in road dust of Isfahan metropolis, central Iran. The mean concentrations of As, Cd, Cu, Ni, Pb, Sb and Zn are 22.15, 2.14, 182.26, 66.63, 393.33, 6.95 and 707.19 mg kg(-1), respectively. When compared with upper continental crust, the samples generally display elevated trace element concentrations, except for Co and Cr. The decreasing trend of calculated enrichment factors (EFs) is Cd>Pb>Sb>Zn>Cu>As>Ni>Cr>Co. Calculated potential ecological risk reveals that among the analyzed metals, Cd and Pb, have a higher potential ecological risk. Statistically, two identified main sources of trace elements include road traffic emissions and resuspension of soil particles. As, Cd, Cu, Pb, Sb and Zn in Isfahan road dust are strongly influenced by anthropogenic activity, mainly traffic emissions, while Co, Cr and Ni originate from resuspension of soil natural parent particles. The sum of 13 major PAHs (∑13PAHs) mass concentration ranges from 184.64 to 3221.72 μg kg(-1) with the mean being 1074.58 μg kg(-1). PAHs sources are identified using PCA analysis. It is demonstrated that the PAHs in Isfahan road dust are mainly derived from traffic emission, coal combustion and petroleum. Toxic equivalent concentrations (TEQs) of PAHs in the road dust ranges between 25.021 μg kg(-1) and 230.893 μg kg(-1). High correlation coefficients (r(2)=0.909 and 0.822, p<0.01) between Benzo[a]pyrene, Benzo[b+k]fluoranthene and toxicity equivalent concentrations of road dust indicate that Benzo[a]pyrene and Benzo[b+k]fluoranthenes are major TEQ contributors. The total incremental life time cancer risk (ILCR) of exposure to PAHs from Isfahan metropolis urban dust is 4.85 × 10(-4) for adult and 5.02 × 10(-4) for children. Estimated results of ILCR indicate that Isfahan residents are potentially exposed to high cancer risk via both dust ingestion and dermal contact.

  3. Polymerin and lignimerin, as humic acid-like sorbents from vegetable waste, for the potential remediation of waters contaminated with heavy metals, herbicides, or polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Capasso, Renato; De Martino, Antonio

    2010-10-13

    Polymerin is a humic acid-like polymer, which we previously recovered for the first time from olive oil mill waste waters (OMWW) only, and chemically and physicochemically characterized. We also previously investigated its versatile sorption capacity for toxic inorganic and organic compounds. Therefore, a review is presented on the removal, from simulated polluted waters, of cationic heavy metals [Cu(II), Zn, Cr(III)] and anionic ones [Cr(VI)) and As(V)] by sorption on this natural organic sorbent in comparison with its synthetic derivatives, K-polymerin, a ferrihydrite-polymerin complex and with ferrihydrite. An overview is also performed of the removal of ionic herbicides (2,4-D, paraquat, MCPA, simazine, and cyhalofop) by sorption on polymerin, ferrihydrite, and their complex and of the removal of phenanthrene, as a representative of polycyclic aromatic hydrocarbons, by sorption on this sorbent and its complexes with micro- or nanoparticles of aluminum oxide, pointing out the employment of all these sorbents in biobed systems, which might allow the remediation of water and protection of surface and groundwater. In addition, a short review is also given on the removal of Cu(II) and Zn from simulated contaminated waters, by sorption on the humic acid-like organic fraction, named lignimerin, which we previously isolated for the first time, in collaboration with a Chilean group, from cellulose mill Kraft waste waters (KCMWW) only. More specifically, the production methods and the characterization of the two natural sorbents (polymerin and lignimerin) and their derivatives (K-polymerin ferrihydrite-polymerin, polymerin-microAl(2)O(3) and -nanoAl(2)O(3), and H-lignimerin, respectively) as well as their sorption data and mechanism are reviewed. Published and original results obtained by the cyclic sorption on all of the considered sorbents for the removal of the above-mentioned toxic compounds from simulated waste waters are also reported. Moreover, sorption capacity

  4. Disorders of heavy metals.

    Science.gov (United States)

    Woimant, France; Trocello, Jean-Marc

    2014-01-01

    Heavy metals and trace elements play an important role in relation to the physiology and pathology of the nervous system. Neurologic diseases related to disorders of metabolism of copper and iron are reviewed. Copper disorders are divided into two classes: ATP7A- or ATP7B-related inherited copper transport disorders (Menkes disease, occipital horn syndrome, ATP7A-related distal motor neuropathy, and Wilson disease) and acquired diseases associated with copper deficiency or copper excess. Iron brain disorders are divided into genetic neurodegeneration with brain iron accumulation (NBIA, neuroferritinopathy, and aceruloplasminemia), genetic systemic iron accumulation with neurologic features (hemochromatosis), and acquired diseases associated with iron excess (superficial siderosis) or iron deficiency (restless leg syndrome). The main features of cadmium, lead, aluminum, mercury, and manganese toxicity are summarized.

  5. Failure Engineered Heavy Metal Penetrators

    Science.gov (United States)

    1992-12-01

    ARMY RESEARCH LABORATORY Failure Engineered Heavy Metal Penetrators, Phase I, SBIR ARL-CR-5· R. Cavalieri, W. Tiarn, and D. Nicholson prepared...REPORT DATE S. REPORT TYPE AND DATES COVERED December 1992 Final Report-1/1/92 - 7/31/92 4. TITLE AND SUBTITLE FAILURE ENGINEERED HEAVY METAL PENETRATORS

  6. Heavy metals and soil microbes

    NARCIS (Netherlands)

    Giller, K.E.; Witter, E.; McGrath, S.

    2009-01-01

    The discovery in the early 1980s that soil microorganisms, and in particular the symbiotic bacteria Rhizobium, were highly sensitive to heavy metals initiated a new line of research. This has given us important insights into a range of topics: ecotoxicology, bioavailability of heavy metals, the role

  7. Methods for natural gas and heavy hydrocarbon co-conversion

    Science.gov (United States)

    Kong, Peter C.; Nelson, Lee O.; Detering, Brent A.

    2009-02-24

    A reactor for reactive co-conversion of heavy hydrocarbons and hydrocarbon gases and includes a dielectric barrier discharge plasma cell having a pair of electrodes separated by a dielectric material and passageway therebetween. An inlet is provided for feeding heavy hydrocarbons and other reactive materials to the passageway of the discharge plasma cell, and an outlet is provided for discharging reaction products from the reactor. A packed bed catalyst may optionally be used in the reactor to increase efficiency of conversion. The reactor can be modified to allow use of a variety of light sources for providing ultraviolet light within the discharge plasma cell. Methods for upgrading heavy hydrocarbons are also disclosed.

  8. Heavy metals, PAHs and toxicity in stormwater wet detention ponds

    DEFF Research Database (Denmark)

    Wium-Andersen, Tove; Nielsen, Asbjørn Haaning; Hvitved-Jacobsen, Thorkild

    2011-01-01

    Concentrations of 6 different heavy metals and total Polycyclic Aromatic Hydrocarbons (PAH) were determined in stormwater runoff and in the pond water of two Danish wet detention ponds. The pond water samples were analyzed for toxic effects, using the algae Selenastrum capricornutum as a test......, reducing the potential toxicity of the metal. Another catchment (residential) produced stormwater and pond water with moderate concentration of heavy metals. The pond water occasionally showed toxic effects but no correlation between heavy metals and toxicity was identified. PAHs concentrations were...... for both catchments low and no correlations between PAH concentrations in the pond and toxicity were found....

  9. Heavy Metal Pumps in Plants

    Energy Technology Data Exchange (ETDEWEB)

    Harper, J.F.

    2000-10-01

    The long term goal of the funded research is to understand how heavy metals are taken up from the soil and translocated throughout the plant. The potential application of this research is to create plants with better heavy metal uptake systems and thereby improve the ability of these plants to help clean up toxic metals from soils. A rate limiting step is using plant for bioremediation is the normally poor capacity of plants to concentrate toxic metals. Our interest in metal ion transport systems includes those for essential mineral nutrients such as molybdenum, copper, iron, manganese, as well as toxic metals such as cerium, mercury, cesium, cadmium, arsenic and selenium. Understanding the pathways by which toxic metals accumulate in plants will enable the engineering of plants to exclude toxic metals and create healthier food sources, or to extract toxic metals from the soil as a strategy to clean up polluted lands and water.

  10. Radical formation by heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Beuter, W.

    1982-09-01

    Certain reduced heavy metal ions can convert oxygen to a ''reactive oxygen species'' by donation of an electron. The reactive oxygen then attacks structures susceptible to oxidation, in particular unsaturated fatty acids, and peroxidizes them in a radical reaction. This process is inhibited by the presence of vitamin E and by other means. Peroxidized lipids decay forming free radicals in the process which themselves can peroxidise neighbouring lipids in a radical chain reaction. This decay is, moreover, catalysed by reduced heavy metal ions but on the other hand retarded by selenium-containing glutathione peroxidase. Radical formation by heavy metals is considerably involved in (i) the production of parenteral iron poisoning of the piglet (ii) haemolytic crisis occurring in ruminants through chronic copper poisoning (iii) the production of lead poisoning in ruminants and other animals. These types of poisonings are made worse by a deficiency of vitamin E and/or selenium. Factors which increase the bio-availability of the free heavy metal ion or reduce the redox potential thereof can aid radical formation as well as factors which lead to a reduction of the heavy metal ion e.g. cysteine, ascorbic acid or glucose.

  11. Heavy metals and polycyclic aromatic hydrocarbons in municipal sewage sludge from a river in highly urbanized metropolitan area in Hanoi, Vietnam: levels, accumulation pattern and assessment of land application.

    Science.gov (United States)

    Hung, Cao Vu; Cam, Bui Duy; Mai, Pham Thi Ngoc; Dzung, Bach Quang

    2015-02-01

    Concentrations of heavy metals and polycyclic aromatic hydrocarbons (PAHs) in sludge from Kim Nguu River, Hanoi, Vietnam, were analyzed to understand the contamination levels, distribution and accumulation pattern of municipal sludge from a highly urbanized area that receive direct discharge of wastewater. High concentrations of heavy metals such as As, Cd, Pb, Cu and Zn were observed in sludge, which were exceeded the Vietnamese regulation threshold values. In general, contamination status of heavy metals in sludge was in the similar range or slightly lower than those previously reported in sludge from the same area. The mean concentrations of As, Cd, Cr, Cu, Ni, Pb and Zn were 24.3, 2.65, 105, 166, 60.8, 73.7 and 569 mg/kg dry wt., respectively. Our result also indicates increased levels of PAHs, which are among the first data on PAHs accumulation in municipal sludge from metropolitan area in Vietnam. PAH concentrations ranged from 218 to 751 mg/kg dry wt. (mean: 456 mg/kg dry wt.), which were greater than those reported in sewage sludge from other countries as well as in sediments and soils collected from the same area. Accumulation pattern revealed the predominant of higher-ringed PAH compounds. Indicator ratios suggest the sources of PAHs were probably derived from biomass (wood and coal) and fossil fuel combustion and petroleum emissions. Most of the sludge samples contain PAHs concentrations exceeding various international guidelines values for sludge and sediment, such as probable effect levels, suggesting the possible risk for adverse biological effects in the study area and in the landfill sites where dredged sludge was dumped.

  12. Heavy metals, PAHs and toxicity in stormwater wet detention ponds

    DEFF Research Database (Denmark)

    Wium-Andersen, Tove; Nielsen, Asbjørn Haaning; Hvitved-Jacobsen, Thorkild

    2011-01-01

    Concentrations of 6 different heavy metals and total Polycyclic Aromatic Hydrocarbons (PAH) were determined in stormwater runoff and in the pond water of two Danish wet detention ponds. The pond water samples were analyzed for toxic effects, using the algae Selenastrum capricornutum as a test...... organism. Stormwater and pond water from a catchment with light industry showed high levels of heavy metals, especially zinc and copper. The pond water showed high toxic effects and copper were found to be the main toxicant. Additionally, a large part of the copper was suspected to be complex bound......, reducing the potential toxicity of the metal. Another catchment (residential) produced stormwater and pond water with moderate concentration of heavy metals. The pond water occasionally showed toxic effects but no correlation between heavy metals and toxicity was identified. PAHs concentrations were...

  13. Removal of Heavy Metals and PAH in Highway Detention Ponds

    DEFF Research Database (Denmark)

    Bentzen, Thomas Ruby; Larsen, Torben; Thorndahl, Søren Liedtke

    2005-01-01

    , which has been designed according to standard design criteria for several decades. The study will focus on heavy metals (Cd, Cr, Cu, Pb and Zn) and polyaromatic hydrocarbons (PAH). The long-term simulation of input of flow and pollution to the ponds will be a hind cast based on time series of historical...

  14. (17) ACCUMULATION OF HEAVY METAL

    African Journals Online (AJOL)

    Adeyinka Odunsi

    Acute toxicity of heavy metals is a rare phenomenon in nature but the intake of sub-‐lethal doses over an extended ... protein (14-40 %), potassium, iron, calcium, sodium .... Lead and chromium were not ..... combined treatments of nickel and.

  15. Heavy metals in Mindhola river estuary, India

    Digital Repository Service at National Institute of Oceanography (India)

    Zingde, M.D.; Rokade, M.A; Mandalia, A

    The heavy metal concentrations are studied along the Mindhola river estuary. Surface and bottom water samples were collected using Niskin Sampler. The sediment samples were collected using a Van Veen grab. The heavy metal concentration is estimated...

  16. Assays of polychlorinated biphenyl congeners and co-contaminated heavy metals in the transgenic Arabidopsis plants carrying the recombinant guinea pig aryl hydrocarbon receptor-mediated β-glucuronidase reporter gene expression system.

    Science.gov (United States)

    Shimazu, Sayuri; Ohta, Masaya; Ohkawa, Hideo; Ashida, Hitoshi

    2012-01-01

    The transgenic Arabidopsis plant XgD2V11-6 carrying the recombinant guinea pig (g) aryl hydrocarbon receptor (AhR)-mediated β-glucuronidase (GUS) reporter gene expression system was examined for assay of polychlorinated biphenyl (PCB) congeners and co-contaminated heavy metals. When the transgenic Arabidopsis plants were treated with PCB126 (toxic equivalency factor; TEF: 0.1) and PCB169 (TEF: 0.03), the GUS activity of the whole plants was increased significantly. After treatment with PCB80 (TEF: 0), the GUS activity was nearly the same level as that treated with 0.1% dimethylsulfoxide (DMSO) as a vehicle control. After exposure to a 1:1 mixture of PCB126 and PCB169, the GUS activity was increased additively. However, after exposure to a mixture of PCB126 and PCB80, the GUS activity was lower than that of the treatment with PCB126 alone. Thus, PCB80 seemed to be an antagonist towards AhR. When the transgenic plants were treated with each of the heavy metals Fe, Cu, Zn, Cd and Pb together with PCB126, Cd and Pb increased the PCB126-induced GUS activity. On the other hand, Fe, Cu and Zn did not affect the PCB126-induced GUS activity. In the presence of the biosurfactant mannosylerythritol lipid-B (MEL-B) and the carrier protein bovine serum albumin (BSA), the PCB126-induced GUS activity was increased, but the Cd-assisted PCB126-induced GUS activity was not affected. Thus, MEL-B and BSA seemed to increase uptake and transport of PCB126, respectively.

  17. Micromycetes sensitiveness to heavy metals

    Directory of Open Access Journals (Sweden)

    O. N. Korinovskaya

    2011-07-01

    Full Text Available The sensitivity of 33 micromycete species to nitric compounds of copper, lead, zinc, nickel and cadmium has been determined. Absidia butleri Lendn, Mortierella vanesae Dixon-Stewart, Cunninghamella echinulata Thaxte, Curvularia tuberculata Jain, Cladosporium cladosporiodes (Fresen G. A. de Vries and Fusarium solani (C. Mart. Appel et Wollenw are sensitive to minimal content of the heavy metals (0.75 of maximum permissible concentration (MPC in the growth medium. At the same time Trixoderma longibrachiatiim Rifai, Alternaria alternatа (Fr. Keissl and Penicillium sp. 4 demonstrated moderate growth under maximal concentration (50 MPC. It is determined that minimal content of the heavy metals in the initial stage of influence (up to 48 h promotes growth of only Fusarium oxysporum E. F. Sm. et Swingle, while retards growth of the other species.

  18. Leachability of heavy metals from solidified sludge

    Institute of Scientific and Technical Information of China (English)

    ZHANG HuYuan; WANG Bao; DONG XingLing; FENG Lei; FAN ZhiMing

    2009-01-01

    Solidified sludge undergoes progressive depletion of the alkalinity materials under natural weathering condition and releases out of heavy metals. The leaching of heavy metals from solidified sewage sludge was studied by acid neutralization capacity (ANC) test and flow-through leaching test. The results of ANC test showed that heavy metals release at high concentration when the pH of extract lowers than 6. The disintegration of solidified sludge and the transformation of heavy metals are the main reasons for the resolubilisation of contaminants. Flow-through leaching test indicated that leaching of heavy metals from solidified sludge occurs in a slow way. A mathematical model has been developed to predict the stabilization time of heavy metals in solidified sludge. The research results showed that decreasing hydraulic conductivity is more important than cement addition for controlling the release of heavy metals from solidified sludge.

  19. Heavy metals precipitation in sewage sludge

    NARCIS (Netherlands)

    Marchioretto, M.M.; Rulkens, W.H.; Bruning, H.

    2005-01-01

    There is a great need for heavy metal removal from strongly metal-polluted sewage sludges. One of the advantages of heavy metal removal from this type of sludge is the possibility of the sludge disposal to landfill with reduced risk of metals being leached to the surface and groundwater. Another

  20. Heavy metals precipitation in sewage sludge

    NARCIS (Netherlands)

    Marchioretto, M.M.; Rulkens, W.H.; Bruning, H.

    2005-01-01

    There is a great need for heavy metal removal from strongly metal-polluted sewage sludges. One of the advantages of heavy metal removal from this type of sludge is the possibility of the sludge disposal to landfill with reduced risk of metals being leached to the surface and groundwater. Another adv

  1. Heavy Lift Launch Capability with a New Hydrocarbon Engine

    Science.gov (United States)

    Threet, Grady E., Jr.; Holt, James B.; Philips, Alan D.; Garcia, Jessica A.

    2011-01-01

    The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center was tasked to define the thrust requirement of a new liquid oxygen rich staged combustion cycle hydrocarbon engine that could be utilized in a launch vehicle to meet NASA s future heavy lift needs. Launch vehicle concepts were sized using this engine for different heavy lift payload classes. Engine out capabilities for one of the heavy lift configurations were also analyzed for increased reliability that may be desired for high value payloads or crewed missions. The applicability for this engine in vehicle concepts to meet military and commercial class payloads comparable to current ELV capability was also evaluated.

  2. Remediation of heavy metal contaminated soil | Nanda |

    African Journals Online (AJOL)

    Remediation of heavy metal contaminated soil. ... in intensive research aiming at understanding metal interactions in soil and their removal in an efficient way. ... This paper investigates the plant-microbial interactions in reclaiming the metal ...

  3. Biosolids and heavy metals in soils

    Directory of Open Access Journals (Sweden)

    Silveira Maria Lucia Azevedo

    2003-01-01

    Full Text Available The application of sewage sludge or biosolids on soils has been widespread in agricultural areas. However, depending on their characteristics, they may cause increase in heavy metal concentration of treated soils. In general, domestic biosolids have lower heavy metal contents than industrial ones. Origin and treatment method of biosolids may markedly influence their characteristics. The legislation that controls the levels of heavy metal contents in biosolids and the maximum concentrations in soils is still controversial. In the long-term, heavy metal behavior after the and of biosolid application is still unknown. In soils, heavy metals may be adsorbed via specific or non-specific adsorption reactions. Iron oxides and organic matter are the most important soil constituents retaining heavy metals. The pH, CEC and the presence of competing ions also affect heavy metal adsorption and speciation in soils. In solution, heavy metals can be present either as free-ions or complexed with organic and inorganic ligands. Generally, free-ions are more relevant in environmental pollution studies since they are readily bioavailable. Some computer models can estimate heavy metal activity in solution and their ionic speciation. Thermodynamic data (thermodynamic stability constant, total metal and ligand concentrations are used by the GEOCHEM-PC program. This program allows studying heavy metal behavior in solution and the effect of changes in the conditions, such as pH and ionic strength and the application of organic and inorganic ligands caused by soil fertilization.

  4. Monitoring of ground water quality and heavy metals in soil during large scale bioremediation of petroleum hydrocarbon contaminated waste in India: case studies

    OpenAIRE

    Ajoy Kumar Mandal; Atanu Jana; Mr. Abhijit Datta; Sarma, Priyangshu M.; Banwari Lal; Jayati Datta

    2014-01-01

    Bioremediation using microbes has been well accepted as an environmentally friendly and economical treatment method for disposal of hazardous petroleum hydrocarbon contaminated waste (oily waste) and this type of bioremediation has been successfully conducted in laboratory and on a pilot scale in various countries, including India. Presently there are no federal regulatory guidelines available in India for carrying out field-scale bioremediation of oily waste using microbes. The results of th...

  5. Heavy metals in plants and phytoremediation.

    Science.gov (United States)

    Cheng, Shuiping

    2003-01-01

    In some cases, soil, water and food are heavily polluted by heavy metals in China. To use plants to remediate heavy metal pollution would be an effective technique in pollution control. The accumulation of heavy metals in plants and the role of plants in removing pollutants should be understood in order to implement phytoremediation, which makes use of plants to extract, transfer and stabilize heavy metals from soil and water. The information has been compiled from Chinese publications stemming mostly from the last decade, to show the research results on heavy metals in plants and the role of plants in controlling heavy metal pollution, and to provide a general outlook of phytoremediation in China. Related references from scientific journals and university journals are searched and summarized in sections concerning the accumulation of heavy metals in plants, plants for heavy metal purification and phytoremediation techniques. Plants can take up heavy metals by their roots, or even via their stems and leaves, and accumulate them in their organs. Plants take up elements selectively. Accumulation and distribution of heavy metals in the plant depends on the plant species, element species, chemical and bioavailiability, redox, pH, cation exchange capacity, dissolved oxygen, temperature and secretion of roots. Plants are employed in the decontamination of heavy metals from polluted water and have demonstrated high performances in treating mineral tailing water and industrial effluents. The purification capacity of heavy metals by plants are affected by several factors, such as the concentration of the heavy metals, species of elements, plant species, exposure duration, temperature and pH. Phytoremediation, which makes use of vegetation to remove, detoxify, or stabilize persistent pollutants, is a green and environmentally-friendly tool for cleaning polluted soil and water. The advantage of high biomass productive and easy disposal makes plants most useful to remediate

  6. The Heavy Metal Subculture and Suicide.

    Science.gov (United States)

    Stack, Steven; And Others

    1994-01-01

    Assessed relationship between heavy metal music and suicide with data on heavy metal magazine subscriptions and youth suicide in 50 states. Found that, controlling for other predictors of suicide, greater strength of metal subculture, higher youth suicide rate, suggests that music perhaps nurtures suicidal tendencies already present in subculture.…

  7. Poisoning of domestic animals with heavy metals

    Directory of Open Access Journals (Sweden)

    Velev Romel

    2009-01-01

    Full Text Available The term heavy metal refers to a metal that has a relatively high density and is toxic for animal and human organism at low concentrations. Heavy metals are natural components of the Earth's crust. They cannot be degraded or destroyed. To a small extent they enter animal organism via food, drinking water and air. Some heavy metals (e.g cooper, iron, chromium, zinc are essential in very low concentrations for the survival of all forms of life. These are described as essential trace elements. However, when they are present in greater quantities, like the heavy metals lead, cadmium and mercury which are already toxic in very low concentrations, they can cause metabolic anomalies or poisoning. Heavy metal poisoning of domestic animals could result, for instance, from drinking-water contamination, high ambient air concentrations near emission sources, or intake via the food chain. Heavy metals are dangerous because they tend to bioaccumulate in a biological organism over time. Manifestation of toxicity of individual heavy metals varies considerably, depending on dose and time of exposure, species, gender and environmental and nutritional factors. Large differences exist between the effects of a single exposure to a high concentration, and chronic exposures to lower doses. The aim of this work is to present the source of poisoning and toxicity of some heavy metals (lead, mercury, cadmium, thallium, arsenic, as well as new data about effects of those heavy metals on the health of domestic animals. .

  8. Biomolecules for removal of heavy metal.

    Science.gov (United States)

    Singh, Namita Ashish

    2017-02-23

    Heavy metals are natural constituents of the earth's crust, but some heavy metals like cadmium, lead, mercury, arsenic etc. are injurious to living organisms at higher concentration. Nowadays, anthropogenic activities have altered geochemical cycles and biochemical balance of heavy metals. Biomolecules are used nowadays for removal of heavy metals compared to other synthetic biosorbents due to their environmental friendly nature and cost effectiveness. The goal of this work is to review research work and patents related to adsorption through biomolecules like polysaccharides, polypeptides, lignin etc. and bio-sorption by biological material that are used for heavy metal removal. Biomolecules are cost effective and there have been significant progresses in the remediation of heavy metals but, still there are some problems that need to be rectified for its application at industrial processes.

  9. Surfactant biocatalyst for remediation of recalcitrant organics and heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Brigmon, Robin L. (North Augusta, SC); Story, Sandra (Greenville, SC); Altman; Denis J. (Evans, GA); Berry, Christopher J. (Aiken, SC)

    2011-03-29

    Novel strains of isolated and purified bacteria have been identified which have the ability to degrade petroleum hydrocarbons including a variety of PAHs. Several isolates also exhibit the ability to produce a biosurfactant. The combination of the biosurfactant-producing ability along with the ability to degrade PAHs enhances the efficiency with which PAHs may be degraded. Additionally, the biosurfactant also provides an additional ability to bind heavy metal ions for removal from a soil or aquatic environment.

  10. Surfactant biocatalyst for remediation of recalcitrant organics and heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Brigmon, Robin L. (North Augusta, SC); Story, Sandra (Greenville, SC); Altman, Denis (Evans, GA); Berry, Christopher J. (Aiken, SC)

    2009-01-06

    Novel strains of isolated and purified bacteria have been identified which have the ability to degrade petroleum hydrocarbons including a variety of PAHs. Several isolates also exhibit the ability to produce a biosurfactant. The combination of the biosurfactant-producing ability along with the ability to degrade PAHs enhances the efficiency with which PAHs may be degraded. Additionally, the biosurfactant also provides an additional ability to bind heavy metal ions for removal from a soil or aquatic environment.

  11. Surfactant biocatalyst for remediation of recalcitrant organics and heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Brigmon, Robin L. (North Augusta, SC); Story, Sandra (Greenville, SC); Altman, Denis J. (Evans, GA); Berry, Christopher J. (Aiken, SC)

    2011-05-03

    Novel strains of isolated and purified bacteria have been identified which have the ability to degrade petroleum hydrocarbons including a variety of PAHs. Several isolates also exhibit the ability to produce a biosurfactant. The combination of the biosurfactant-producing ability along with the ability to degrade PAHs enhances the efficiency with which PAHs may be degraded. Additionally, the biosurfactant also provides an additional ability to bind heavy metal ions for removal from a soil or aquatic environment.

  12. Surfactant biocatalyst for remediation of recalcitrant organics and heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Brigmon, Robin L. (North Augusta, SC); Story, Sandra (Greenville, SC); Altman, Denis J. (Evans, GA); Berry, Christopher J. (Aiken, SC)

    2011-03-15

    Novel strains of isolated and purified bacteria have been identified which have the ability to degrade petroleum hydrocarbons including a variety of PAHs. Several isolates also exhibit the ability to produce a biosurfactant. The combination of the biosurfactant-producing ability along with the ability to degrade PAHs enhances the efficiency with which PAHs may be degraded. Additionally, the biosurfactant also provides an additional ability to bind heavy metal ions for removal from a soil or aquatic environment.

  13. The effects of polycyclic aromatic hydrocarbons and heavy metals on terrestrial annelids in urban soils O efeito de hidrocarbonetos aromáticos policíclicos e metais pesados em anelídeos terrestres de solos urbanos

    Directory of Open Access Journals (Sweden)

    Pižl Václav

    2009-08-01

    Full Text Available The effect of soil contamination by polycyclic aromatic hydrocarbons (PAH and heavy metals on earthworms and enchytraeids was studied in urban parks, in Brno, Czech Republic. In spring and autumn 2007, annelids were collected and soil samples taken in lawns along transects, at three different distances (1, 5 and 30 m from streets with heavy traffic. In both seasons, two parks with two transects each were sampled. Earthworms were collected using the electrical octet method. Enchytraeids were extracted by the wet funnel method from soil cores. All collected annelids were counted and identified. Basic chemical parameters and concentrations of 16 PAH, Cd, Cu, Pb, and Zn were analysed from soil from each sampling point. PAH concentrations were rather low, decreasing with the distance from the street in spring but not in autumn. Heavy metal concentrations did not decrease significantly with increasing distance. Annelid densities did not significantly differ between distances, although there was a trend of increase in the number of earthworms with increasing distance. There were no significant correlations between soil content of PAH or heavy metals and earthworm or enchytraeid densities. Earthworm density and biomass were negatively correlated with soil pH; and enchytraeid density was positively correlated with soil phosphorus.O efeito da contaminação do solo por hidrocarbonetos aromáticos policíclicos (PAH e metais pesados em minhocas e enquitreídeos foi estudado em parques urbanos, em Brno, República Tcheca. Na primavera e outono de 2007, os anelídeos foram coletados, e amostras de solo foram retiradas de gramados ao longo de transectos, em três diferentes distâncias (1, 5 e 30 m de ruas com muito tráfego. Nas duas estações, foram amostrados dois parques com dois transectos cada um. As minhocas com uso do método do octeto elétrico, e os enquitreídeos foram extraídos das amostras de solo pelo método do funil úmido. Todos os anel

  14. MICROBIAL REMOVAL OF HEAVY METALS FROM WASTEWATER

    Directory of Open Access Journals (Sweden)

    Justyna Koc-Jurczyk

    2014-10-01

    Full Text Available Industrialization and urbanization result in increase of heavy metals released into the environment (soil, lakes, rivers, seas, oceans, groundwater. Studies on biosorption of heavy metals are aimed to specify types of microorganisms which could efficiently bind metals. This approach has a very important significance for both slowing down metals exploitation by recovery, and also reduction of environmental pollution by decrease of their excessive concentration. Recent studies have reported about the capabilities of fungi, algae, yeasts, bacteria, waste and agricultural residues or materials containing chitosan derived from crustacean shells as a biosorbents. Biohydrometallurgy could be considered as a new “green” technology of heavy metals removal from wastewater.

  15. Bioremoval of heavy metals by bacterial biomass.

    Science.gov (United States)

    Aryal, Mahendra; Liakopoulou-Kyriakides, Maria

    2015-01-01

    Heavy metals are among the most common pollutants found in the environment. Health problems due to the heavy metal pollution become a major concern throughout the world, and therefore, various treatment technologies such as reverse osmosis, ion exchange, solvent extraction, chemical precipitation, and adsorption are adopted to reduce or eliminate their concentration in the environment. Biosorption is a cost-effective and environmental friendly technique, and it can be used for detoxification of heavy metals in industrial effluents as an alternative treatment technology. Biosorption characteristics of various bacterial species are reviewed here with respect to the results reported so far. The role of physical, chemical, and biological modification of bacterial cells for heavy metal removal is presented. The paper evaluates the different kinetic, equilibrium, and thermodynamic models used in bacterial sorption of heavy metals. Biomass characterization and sorption mechanisms as well as elution of metal ions and regeneration of biomass are also discussed.

  16. Heavy Lift Launch Capability with a New Hydrocarbon Engine (NHE)

    Science.gov (United States)

    Threet, Grady E., Jr.; Holt, James B.; Philips, Alan D.; Garcia, Jessica A.

    2011-01-01

    The Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center has analyzed over 2000 Ares V and other heavy lift concepts in the last 3 years. These concepts were analyzed for Lunar Exploration Missions, heavy lift capability to Low Earth Orbit (LEO) as well as exploratory missions to other near earth objects in our solar system. With the pending retirement of the Shuttle fleet, our nation will be without a civil heavy lift launch capability, so the future development of a new heavy lift capability is imperative for the exploration and large science missions our Agency has been tasked to deliver. The majority of the heavy lift concepts analyzed by ACO during the last 3 years have been based on liquid oxygen / liquid hydrogen (LOX/LH2) core stage and solids booster stage propulsion technologies (Ares V / Shuttle Derived and their variants). These concepts were driven by the decisions made from the results of the Exploration Systems Architecture Study (ESAS), which in turn, led to the Ares V launch vehicle that has been baselined in the Constellation Program. Now that the decision has been made at the Agency level to cancel Constellation, other propulsion options such as liquid hydrocarbon fuels are back in the exploration trade space. NASA is still planning exploration missions with the eventual destination of Mars and a new heavy lift launch vehicle is still required and will serve as the centerpiece of our nation s next exploration architecture s infrastructure. With an extensive launch vehicle database already developed on LOX/LH2 based heavy lift launch vehicles, ACO initiated a study to look at using a new high thrust (> 1.0 Mlb vacuum thrust) hydrocarbon engine as the primary main stage propulsion in such a launch vehicle.

  17. Heavy metals in packaging : a literature survey

    NARCIS (Netherlands)

    van Putten EM; IMG

    2011-01-01

    The use of the heavy metals cadmium, mercury, chromium and lead in packaging is forbidden internationally for some years because these substances are harmful to the environment. In 2002 the Dutch national Inspectorate for the Environment determined the presence of heavy metals in packaging for consu

  18. Behaviour of heavy metals in soils

    NARCIS (Netherlands)

    Harmsen, K.

    1977-01-01

    Fractions of Zn, Cd, Cu, Pb, Fe and Mn extractable with water, a salt solution and dilute acid, and residual fractions were determined in soils with raised contents of heavy metals, near zinc smelters, along a river formerly discharging heavy metals, and in a sewage farm. Special attention was paid

  19. Heavy Metal, Religiosity, and Suicide Acceptability.

    Science.gov (United States)

    Stack, Steven

    1998-01-01

    Reports on data taken from the General Social Survey that found a link between "heavy metal" rock fanship and suicide acceptability. Finds that relationship becomes nonsignificant once level of religiosity is controlled. Heavy metal fans are low in religiosity, which contributes to greater suicide acceptability. (Author/JDM)

  20. Heavy Metal Music and Adolescent Suicidal Risk.

    Science.gov (United States)

    Lacourse, Eric; Claes, Michel; Villeneuve, Martine

    2001-01-01

    Studied differentiating characteristics of youth who prefer heavy metal music, worship music, and use music for vicarious release. Data for 275 secondary school students suggest that heavy metal music preference and worshipping is not related to suicidal risk when controlling for other suicide factors. Discusses findings in the context of…

  1. Geobacter daltonii sp. nov., an Fe(III)- and uranium(VI)-reducing bacterium isolated from a shallow subsurface exposed to mixed heavy metal and hydrocarbon contamination.

    Science.gov (United States)

    Prakash, Om; Gihring, Thomas M; Dalton, Dava D; Chin, Kuk-Jeong; Green, Stefan J; Akob, Denise M; Wanger, Greg; Kostka, Joel E

    2010-03-01

    An Fe(III)- and uranium(VI)-reducing bacterium, designated strain FRC-32(T), was isolated from a contaminated subsurface of the USA Department of Energy Oak Ridge Field Research Center (ORFRC) in Oak Ridge, Tennessee, where the sediments are exposed to mixed waste contamination of radionuclides and hydrocarbons. Analyses of both 16S rRNA gene and the Geobacteraceae-specific citrate synthase (gltA) mRNA gene sequences retrieved from ORFRC sediments indicated that this strain was abundant and active in ORFRC subsurface sediments undergoing uranium(VI) bioremediation. The organism belonged to the subsurface clade of the genus Geobacter and shared 92-98 % 16S rRNA gene and 75-81 % rpoB gene sequence similarities with other recognized species of the genus. In comparison to its closest relative, Geobacter uraniireducens Rf4(T), according to 16S rRNA gene sequence similarity, strain FRC-32(T) showed a DNA-DNA relatedness value of 21 %. Cells of strain FRC-32(T) were Gram-negative, non-spore-forming, curved rods, 1.0-1.5 microm long and 0.3-0.5 microm in diameter; the cells formed pink colonies in a semisolid cultivation medium, a characteristic feature of the genus Geobacter. The isolate was an obligate anaerobe, had temperature and pH optima for growth at 30 degrees C and pH 6.7-7.3, respectively, and could tolerate up to 0.7 % NaCl although growth was better in the absence of NaCl. Similar to other members of the Geobacter group, strain FRC-32(T) conserved energy for growth from the respiration of Fe(III)-oxyhydroxide coupled with the oxidation of acetate. Strain FRC-32(T) was metabolically versatile and, unlike its closest relative, G. uraniireducens, was capable of utilizing formate, butyrate and butanol as electron donors and soluble ferric iron (as ferric citrate) and elemental sulfur as electron acceptors. Growth on aromatic compounds including benzoate and toluene was predicted from preliminary genomic analyses and was confirmed through successive transfer with

  2. Effect of heavy metals on soil fungi

    Science.gov (United States)

    Sosak-Świderska, Bożena

    2010-05-01

    Fungi constitute a high proportion of the microbial biomass in soil.Being widespread in soil their large surface-to-volume ratio and high metabolic activity, fungi can contribute significantly to heavy metal dynamics in soil. At neutral pH heavy metals in soils tend to be immobilized to precipitation and/or absorption to cation exchange sites of clay minerals. In the acidic soils, metals are more mobile and enter food webs easier. Microbial production of acids and chelating agents can mobilize to toxic metals. Mobilization is often by uptake and intracellular accumulation of the heavy metlas, and in this way, the bioavailability of metals towards other organisms can be more reduced. Fungi were isolated from soils from Upper Silesia in Poland and belonged to widespread genera: Aspergillus, Cladosporium, Penicillium and Trichoderma. Fungi from different taxonomic groups differ greatly in their tolerance to heavy metals. This could be related to their wall structure and chemistry as well as biochemical and physiological characteristics of fungi. Localization of metals in fungal cells was studied using electron microscopy analysis. Metal biosorption in the cell wall can be complex as melanin granules. Fungal vacuoles have an important role in the regulation of the cytosolic concentration of metal ions, and may contribute to heavy metal tolerance.In polluted soils with heavy metals, fungal species composition can be changed and their physiological activity can be changed, too.

  3. Impact of the Prestige oil spill on marsh soils: Relationship between heavy metal, sulfide and total petroleum hydrocarbon contents at the Villarrube and Lires marshes (Galicia, Spain); Impacto de la marea negra del Prestige en suelos de marisma: relacion entre los contenidos de metales pesados, sulfuros e hidrocarburos en las marismas de Villarrube y Lires (Galicia, Espana)

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, L.; Marcet, P.; Covelo, E.F.; Vega, F.A. [Department of Vegetable Biology and Soil Science, Vigo (Spain); Fernandez-Feal, L.; Fernandez-Feal, C. [Escuela Politecnica Superior, Universidad de la Coruna, Ferrol (Spain)

    2004-09-15

    The objectives of this study were to determine the effect of the Prestige oil spill on the total petroleum hydrocarbons and heavy metal contents of soils in two marshes (Lires and Villarrube, Galicia, Spain) and the relationship between their oxidation-reduction potential and the solubility of heavy metals with sulfide and sulfate contents. Soil samples were taken from polluted and unpolluted areas and their petroleum hydrocarbon contents, heavy metal contents and other chemical characteristics were measured. The soils affected by the oil spill show remarkable contents of Cr, Cu, Ni, Pb and V. The Lires marsh soils are more affected by fuel oil than Villarrube marsh. The effects of the contaminating agents on the soils reach distances of up to 500 m from the coastline. In the first 400 m, there are important spatial variations because the fuel oil penetrated into the soils through tidal action and not directly. The Cr, Cu, Ni, Pb and V contents of polluted soils were between 50 and 200 times higher than those of their unpolluted counterparts and the background concentrations in Galician coastal sediments. In the case of Cr, Cu, Ni, Pb and V, their origin through the fuel oil was corroborated by the high correlation (r > 0.90) between the concentrations of these metals and the total petroleum hydrocarbon content of the polluted soils, which shows the combined addition of these metals through the fuel oil. [Spanish] Los objetivos de este trabajo fueron determinar el efecto de la marea negra del buque tanque Prestige en el contenido total de hidrocarburos y de metales pesados en suelos de dos marismas (Lires y Villarrube, Galicia, Espana) y la relacion entre el potencial de oxidacion-reduccion y la solubilidad de los metales pesados con los contenidos de sulfuros y de sulfatos. Se tomaron muestras de suelos de las zonas contaminadas y no contaminadas y se determinaron diversas caracteristicas quimicas, el contenido total de hidrocarburos y de metales pesados. Los

  4. Simultaneous removal of nitrate and heavy metals by iron metal*

    OpenAIRE

    Hao, Zhi-wei; Xu, Xin-hua; Jin, Jian; He, Ping; Liu, Yong; Wang, Da-hui

    2005-01-01

    Great attention should be paid now to simultaneously removing common pollutants, especially inorganic pollutants such as nitrate and heavy metals, as individual removal has been investigated extensively. Removing common pollutants simultaneously by iron metal is a very effective alternative method. Near neutral pH, heavy metals, such as copper and nickel, can be removed rapidly by iron metal, while nitrate removal very much slower than that of copper and nickel, and copper can accelerate nitr...

  5. Heavy metals in municipal solid waste deposits

    Energy Technology Data Exchange (ETDEWEB)

    Flyhammar, P.

    1997-12-01

    Extensive use of heavy metals in modern society influences routes followed by fluxes on the surface of the Earth. The changed flow paths may be harmful for the balance of biological systems at different levels, micro-organisms, human beings and whole ecosystems, since the toxicity of heavy metals is determined by their concentrations and chemical forms. Despite the low mobility of heavy metals (Zn, Cu, Pb, Cr, Ni and Cd) in municipal landfills, it was found that extensive transformations of the binding forms of heavy metal take place within the waste mass during the degradation of the waste. These changes appear to be closely related to the development of early diagenetic solid phases, i.e. new secondary solid phases formed in the waste. The heavy metals often constitute a minor part of these phases and the bindings include several forms such as adsorption, complexation, coprecipitation, precipitation, etc. It was also found that the associations between heavy metals and solid phases are dominated by several binding forms to one specific substrate rather than bindings to various solid phases. The mobility of iron and manganese seems to increase during the processes involved in waste degradation due to the solution of oxide/hydroxide phases, while the heavy metals appear to become less mobile due to their binding to organic compounds and sulphides. However, one exception in this case may be nickel. Another aspect of the transformation of heavy metals is the accumulation of pools of heavy metals which can become susceptible to environmental changes, such as oxidation or acidification. However, the risk of increased mobilization caused by lower pH values seem to be limited since municipal solid waste has a large buffer capacity. 66 refs, 9 figs, 3 tabs 66 refs, 9 figs, 3 tabs

  6. The use of macrophytes for heavy metal pollution control in urban wetlands

    OpenAIRE

    Zhang, Tiantian

    1990-01-01

    A literature survey has been undertaken to identify the role and function of aquatic macrophytes in the removal of contaminants from polluted surface waters. The survey focussed primarily on heavy metals, however nitrate, phosphate and hydrocarbon removal are also discussed and the application of aquatic macrophytes in wastewater treatment systems is also described. The objectives of the research are: To determine heavy metal variations in water, sediment and plant tissues in both fiel...

  7. ASSESSMENT OF HEAVY METALS POLLUTION OF SEDIMENTS ...

    African Journals Online (AJOL)

    Preferred Customer

    KEY WORDS: Fosu lagoon, Heavy metal, Enrichment, Pollution ... Both anthropogenic pressures and natural processes account for degradation in surface water ... only play an important role in river water pollution but can also provide a ...

  8. 202 197 Heavy Metals and Microbial Contamin

    African Journals Online (AJOL)

    2008-12-02

    Dec 2, 2008 ... ABSTRACT: The heavy metal and microbial contaminants levels were evaluated in a commercial polyherbal product ... fungal toxins such as aflatoxins, pesticides and synthetic ... natural products is that 'natural' equals safe.

  9. THE IMPACT OF HEAVY METAL CONCENTRATION ON

    African Journals Online (AJOL)

    Temitope

    Toxicity levels of heavy metals depend on the type, its ... sectors (food and processing sector) accounted for nearly ... Groundwater accounts for about 98% of the world's ... footpaths and a few major roads, with an uneven distribution of ...

  10. HEAVY METAL POLLUTION OF LAKE VICTORIA

    African Journals Online (AJOL)

    Department of Physics, University of Dar es Salaam,. P. O. Box ... parameters. The study ..... chemical wastes containing heavy metals and organochlorides. During ... In Mwanza South, samples were collected near a fish processing industry,.

  11. Combined Heavy Metal Pollution in Red Soil

    Institute of Scientific and Technical Information of China (English)

    CHENHUAIMAN; ZHENGCHNURONG

    1996-01-01

    The effects of combined heavy metal pollution of red soil on the growth of wetland rice and the transfer of Pb,Cd,Cu and Zn from soil into plants were sudied by greenhouse pot experiment,The results showed that the plantyields were markedly affected by heavy metals,with the exception of Pb,in soils under the experimental conditions,without taking into consideration all the interactions among the elements.The concentrations of the elemets in plants were mainly affected by the specific element added to the soil.The effect of interactions among the heavy metals was very significant either on plant yields or on the concentration of the elements in plants.The risk assessment of a combined pollution by heavy metals in the soil is discussed preliminarily in terms of the relative pollution equivalent.

  12. Heavy metals and living systems: An overview

    Directory of Open Access Journals (Sweden)

    Reena Singh

    2011-01-01

    Full Text Available Heavy metals are natural constituents of the earth′s crust, but indiscriminate human activities have drastically altered their geochemical cycles and biochemical balance. This results in accumulation of metals in plant parts having secondary metabolites, which is responsible for a particular pharmacological activity. Prolonged exposure to heavy metals such as cadmium, copper, lead, nickel, and zinc can cause deleterious health effects in humans. Molecular understanding of plant metal accumulation has numerous biotechnological implications also, the long term effects of which might not be yet known.

  13. Heavy metal removal and recovery using microorganisms

    Energy Technology Data Exchange (ETDEWEB)

    Wilde, E.W. (Westinghouse Savannah River Co., Aiken, SC (United States)); Benemann, J.R. (Benemann (J.R.), Pinole, CA (United States))

    1991-02-01

    Microorganisms -- bacteria, fungi, and microalgae -- can accumulate relatively large amounts of toxic heavy metals and radionuclides from the environment. These organisms often exhibit specificity for particular metals. The metal content of microbial biomass can be a substantial fraction of total dry weight with concentration factors (metal in dry biomass to metal in solution) exceeding one million in some cases. Both living and inert (dead) microbial biomass can be used to reduce heavy metal concentrations in contaminated waters to very low levels -- parts per billion and even lower. In many respects (e.g. specificity, residual metal concentrations, accumulation factors, and economics) microbial bioremoval processes can be superior to conventional processes, such as ion exchange and caustic (lime or hydroxide) precipitation for heavy metals removal from waste and contaminated waters. Thus, bioremoval could be developed to contribute to the clean-up of wastes at the Savannah River Site (SRS) and other DOE facilities. However, the potential advantages of bioremoval processes must still be developed into practical operating systems. A detailed review of the literature suggests that appropriate bioremoval processes could be developed for the SRS. There is great variability from one biomass source to another in bioremoval capabilities. Bioremoval is affected by pH, other ions, temperature, and many other factors. The biological (living vs. dead) and physical (immobilized vs. dispersed) characteristics of the biomass also greatly affect metal binding. Even subtle differences in the microbial biomass, such as the conditions under which it was cultivated, can have major effects on heavy metal binding.

  14. Heavy metal and proximate composition associated with the ...

    African Journals Online (AJOL)

    User

    2014-05-08

    May 8, 2014 ... inorganic products, generating heat as a metabolic waste product. Heavy metal ..... Potencial Bioremediation Agent in Compost Material Contaminated with Heavy .... Toxicity of non-radioactive heavy metals and their salts in ...

  15. Solubility of deposited airborne heavy metals

    Science.gov (United States)

    Cizmecioglu, Sibel C.; Muezzinoglu, Aysen

    2008-09-01

    Toxic effects of heavy metals in water and soil environments are important. Quantifying the heavy metal concentrations and their solubilities in dry and wet deposition samples is part of atmospheric research. Soluble fractions of the deposited air pollutants are important in food chain mechanisms as heavy metals may cause ecotoxic impacts. In this study, the solubilities of Cr, Cd, Pb, Cu, Zn, and Ni were investigated in deposition samples for total, dissolved, and suspended fractions after collection in a surrogate, water-surface sampler in Izmir, Turkey, during October 2003 to June 2004. To find overall solubility of each metal in dry and wet deposition samples, concentrations in soluble and suspended phases of aqueous solutions were analyzed separately. Ratios between total and dissolved forms and the metals in the same forms were analyzed and evaluated statistically. It was found that the deposited metal fluxes were significantly correlated in wet deposition with the highest correlation between Cd and Pb in the soluble and total forms. Comparatively smaller correlations were found between these metal fluxes in dry deposition samples. Results of this study showed the importance of metal pollution, especially ecotoxic properties of heavy metals in wet deposition far more than dry deposition.

  16. Bioremediation mechanisms of combined pollution of PAHs and heavy metals by bacteria and fungi: A mini review.

    Science.gov (United States)

    Liu, Shao-Heng; Zeng, Guang-Ming; Niu, Qiu-Ya; Liu, Yang; Zhou, Lu; Jiang, Lu-Hua; Tan, Xiao-Fei; Xu, Piao; Zhang, Chen; Cheng, Min

    2017-01-01

    In recent years, knowledge in regard to bioremediation of combined pollution of polycyclic aromatic hydrocarbons (PAHs) and heavy metals by bacteria and fungi has been widely developed. This paper reviews the species of bacteria and fungi which can tackle with various types of PAHs and heavy metals entering into environment simultaneously or successively. Microbial activity, pollutants bioavailability and environmental factors (e.g. pH, temperature, low molecular weight organic acids and humic acids) can all affect the bioremediation of PAHs and heavy metals. Moreover, this paper summarizes the remediation mechanisms of PAHs and heavy metals by microbes via elucidating the interaction mechanisms of heavy metals with heavy metals, PAHs/PAHs metabolites with PAHs and PAHs with heavy metals. Based on the above reviews, this paper also discusses the potential research needs for this field.

  17. Plant transporters involved in heavy metal homeostasis

    Directory of Open Access Journals (Sweden)

    Dorina Podar

    2010-12-01

    Full Text Available Transition metal ions (predominately manganese, iron, cobalt, nickel, copper and zinc havean array of catalytic and regulatory roles in the growth and development of all living organisms.However, an excess of these metal ions can also be toxic to any life form and therefore every cell andwhole organism needs to maintain the concentration of these essential nutrient metals within a narrowrange: a process known as metal homeostasis. Heavy metal ions are taken up into cells by selectivetransporters and as they cannot be degraded, the “desired” levels of metal ions are achieved by anumber of strategies that involve: chelation, sequestration and export out of the cell. Cation DiffusionFacilitators (CDF is a large family of transporters involved in maintaining the cytosolic metalconcentration. They transport different heavy metal divalent ions, but exhibit main affinity for zinc, ironand manganese. Metal Tolerance Proteins (MTPs are a subfamily of the Cation Diffusion Facilitator (CDFfamily found in plants. There has been much interest in these heavy metal transporters in order toprovide an insight into plant metal homeostasis, which has significant implications in human health andphytoremediation. Although data regarding the CDFs/MTPs mechanism is gathering there is still littleinformation with respect to metal selectivity determinants.

  18. Photoelectrochemical detection of toxic heavy metals

    CSIR Research Space (South Africa)

    Chamier, J

    2010-09-01

    Full Text Available Toxic heavy metals in air, soil, and water are global problems that are a growing threat to the environment. Trace metal determination is currently done by expensive separation techniques which include inductively coupled plasma (ICP) and cold vapor...

  19. Heavy metals in surface sediments of the Jialu River, China: Their relations to environmental factors

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Jie [State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, Nanjing 210093 (China); Environmental Engineering Program, Department of Civil Engineering, Auburn University, Auburn, AL 36849 (United States); Zhao, Changpo [State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, Nanjing 210093 (China); Luo, Yupeng [Department of Mathematics and Statistics, Auburn University, Auburn, AL 36849 (United States); Liu, Chunsheng, E-mail: liuchunshengidid@126.com [College of Fisheries, Huazhong Agricultural University, Wuhan 430070 (China); Kyzas, George Z. [Laboratory of General and Inorganic Chemical Technology, Department of Chemistry, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece); Luo, Yin [State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, Nanjing 210093 (China); Zhao, Dongye [Environmental Engineering Program, Department of Civil Engineering, Auburn University, Auburn, AL 36849 (United States); An, Shuqing [State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, Nanjing 210093 (China); Zhu, Hailiang, E-mail: zhuhl@nju.edu.cn [State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, Nanjing 210093 (China)

    2014-04-01

    Highlights: • Zhengzhou City had major effect on the pollution of the Jialu River. • TN, OP, TP and COD{sub Mn} in water drove heavy metals to deposit in sediments. • B-IBI was sensitive to the adverse effect of heavy metals in sediments. - Abstract: This work investigated heavy metal pollution in surface sediments of the Jialu River, China. Sediment samples were collected at 19 sites along the river in connection with field surveys and the total concentrations were determined using atomic fluorescence spectrometer and inductively coupled plasma optical emission spectrometer. Sediment samples with higher metal concentrations were collected from the upper reach of the river, while sediments in the middle and lower reaches had relatively lower metal concentrations. Multivariate techniques including Pearson correlation, hierarchical cluster and principal components analysis were used to evaluate the metal sources. The ecological risk associated with the heavy metals in sediments was rated as moderate based on the assessments using methods of consensus-based Sediment Quality Guidelines, Potential Ecological Risk Index and Geo-accumulation Index. The relations between heavy metals and various environmental factors (i.e., chemical properties of sediments, water quality indices and aquatic organism indices) were also studied. Nitrate nitrogen, total nitrogen, and total polycyclic aromatic hydrocarbons concentrations in sediments showed a co-release behavior with heavy metals. Ammonia nitrogen, total nitrogen, orthophosphate, total phosphate and permanganate index in water were found to be related to metal sedimentation. Heavy metals in sediments posed a potential impact on the benthos community.

  20. Dendroremediation of heavy metal polluted soils.

    Science.gov (United States)

    González-Oreja, J A; Rozas, M A; Alkorta, I; Garbisu, C

    2008-01-01

    Heavy metals are among the most common and harmful pollutants reaching the soil ecosystem all over the world. Phytoextraction is an effective, non-intrusive, inexpensive, aesthetically pleasing, socially accepted, highly promising phytotechnology for the remediation of soils polluted with heavy metals. To overcome the so-called 'Achilles' heel' of phytoextraction, namely, the long time needed for effective remediation, this phytotechnology should be combined with other profit-making activities such as forestry or bioenergy production. Dendroremediation, or the use of trees to clean up polluted soil and water, appears of great potential for metal phytoextraction, especially when using fast-growing tree species, for example, willows (Salix sp. pl.) and poplars (Populus sp. pl.). Most important, the ecologic and environmental risks of dispersing heavy metals into the ecosystems by dendroremediation strategies should be minimized by selecting the right tree species, properly managing/disposing the polluted plant material, or a combination of both options.

  1. Phytochelatins: peptides involved in heavy metal detoxification.

    Science.gov (United States)

    Pal, Rama; Rai, J P N

    2010-03-01

    Phytochelatins (PCs) are enzymatically synthesized peptides known to involve in heavy metal detoxification and accumulation, which have been measured in plants grown at high heavy metal concentrations, but few studies have examined the response of plants even at lower environmentally relevant metal concentrations. Recently, genes encoding the enzyme PC synthase have been identified in plants and other species enabling molecular biological studies to untangle the mechanisms underlying PC synthesis and its regulation. The present paper embodies review on recent advances in structure of PCs, their biosynthetic regulation, roles in heavy metal detoxification and/or accumulation, and PC synthase gene expression for better understanding of mechanism involved and to improve phytoremediation efficiency of plants for wider application.

  2. Removal of heavy metals from biowaste: modelling of heavy metal behaviour and development of removal technologies.

    NARCIS (Netherlands)

    Veeken, A.

    1998-01-01

    In the Netherlands, recycling of solid organic waste streams as compost only becomes possible if the compost complies with the heavy metals standards of the BOOM decree. This dissertation focuses on the removal of heavy metals from biowaste, i.e. the source separated organic fraction of municipal so

  3. Removal of heavy metals from biowaste : modelling of heavy metal behaviour and development of removal technologies

    NARCIS (Netherlands)

    Veeken, A.H.M.

    1998-01-01

    In the Netherlands, recycling of solid organic waste streams as compost only becomes possible if the compost complies with the heavy metals standards of the BOOM decree. This dissertation focuses on the removal of heavy metals from biowaste, i.e. the source separated organic fraction of mun

  4. Heavy Metal Poisoning and Cardiovascular Disease

    Directory of Open Access Journals (Sweden)

    Eman M. Alissa

    2011-01-01

    Full Text Available Cardiovascular disease (CVD is an increasing world health problem. Traditional risk factors fail to account for all deaths from CVD. It is mainly the environmental, dietary and lifestyle behavioral factors that are the control keys in the progress of this disease. The potential association between chronic heavy metal exposure, like arsenic, lead, cadmium, mercury, and CVD has been less well defined. The mechanism through which heavy metals act to increase cardiovascular risk factors may act still remains unknown, although impaired antioxidants metabolism and oxidative stress may play a role. However, the exact mechanism of CVD induced by heavy metals deserves further investigation either through animal experiments or through molecular and cellular studies. Furthermore, large-scale prospective studies with follow up on general populations using appropriate biomarkers and cardiovascular endpoints might be recommended to identify the factors that predispose to heavy metals toxicity in CVD. In this review, we will give a brief summary of heavy metals homeostasis, followed by a description of the available evidence for their link with CVD and the proposed mechanisms of action by which their toxic effects might be explained. Finally, suspected interactions between genetic, nutritional and environmental factors are discussed.

  5. Recovering heavy rare earth metals from magnet scrap

    Energy Technology Data Exchange (ETDEWEB)

    Ott, Ryan T.; McCallum, Ralph W.; Jones, Lawrence L.

    2017-08-08

    A method of treating rare earth metal-bearing permanent magnet scrap, waste or other material in a manner to recover the heavy rare earth metal content separately from the light rare earth metal content. The heavy rare earth metal content can be recovered either as a heavy rare earth metal-enriched iron based alloy or as a heavy rare earth metal based alloy.

  6. Biodegradation of petroleum hydrocarbons in estuarine sediments: metal influence.

    Science.gov (United States)

    Almeida, Raquel; Mucha, Ana P; Teixeira, Catarina; Bordalo, Adriano A; Almeida, C Marisa R

    2013-02-01

    In this work, the potential effect of metals, such as Cd, Cu and Pb, on the biodegradation of petroleum hydrocarbons in estuarine sediments was investigated under laboratory conditions. Sandy and muddy non-vegetated sediments were collected in the Lima River estuary (NW Portugal) and spiked with crude oil and each of the metals. Spiked sediments were left in the dark under constant shaking for 15 days, after which crude oil biodegradation was evaluated. To estimate microbial abundance, total cell counts were obtained by DAPI staining and microbial community structure was characterized by ARISA. Culturable hydrocarbon degraders were determined using a modified most probable number protocol. Total petroleum hydrocarbons concentrations were analysed by Fourier Transform Infrared Spectroscopy after their extraction by sonication, and metal contents were determined by atomic absorption spectrometry. The results obtained showed that microbial communities had the potential to degrade petroleum hydrocarbons, with a maximum of 32 % degradation obtained for sandy sediments. Both crude oil and metals changed the microbial community structure, being the higher effect observed for Cu. Also, among the studied metals, only Cu displayed measurable deleterious effect on the hydrocarbons degradation process, as shown by a decrease in the hydrocarbon degrading microorganisms abundance and in the hydrocarbon degradation rates. Both degradation potential and metal influence varied with sediment characteristics probably due to differences in contaminant bioavailability, a feature that should be taken into account in developing bioremediation strategies for co-contaminated estuarine sites.

  7. Community Heavy Metal Exposure, San Francisco, California

    Science.gov (United States)

    Chavez, A.; Devine, M.; Ho, T.; Zapata, I.; Bissell, M.; Neiss, J.

    2008-12-01

    Heavy metals are natural elements that generally occur in minute concentrations in the earth's crust. While some of these elements, in small quantities, are vital to life, most are harmful in larger doses. Various industrial and agricultural processes can result in dangerously high concentrations of heavy metals in our environment. Consequently, humans can be exposed to unsafe levels of these elements via the air we breathe, the water and food we consume, and the many products we use. During a two week study we collected numerous samples of sediments, water, food, and household items from around the San Francisco Bay Area that represent industrial, agricultural, and urban/residential settings. We analyzed these samples for Mercury (Hg), Lead (Pb), and Arsenic (As). Our goal was to examine the extent of our exposure to heavy metals in our daily lives. We discovered that many of the common foods and materials in our lives have become contaminated with unhealthy concentrations of these metals. Of our food samples, many exceeded the EPA's Maximum Contaminant Levels (MCL) set for each metal. Meats (fish, chicken, and beef) had higher amounts of each metal than did non-meat items. Heavy metals were also prevalent in varying concentrations in the environment. While many of our samples exceeded the EPA's Sediment Screening Level (SSL) for As, only two other samples surpassed the SSL set for Pb, and zero of our samples exceeded the SSL for Hg. Because of the serious health effects that can result from over-exposure to heavy metals, the information obtained in this study should be used to influence our future dietary and recreational habits.

  8. Electrodialytic remediation of heavy metal polluted soil

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Jensen, Pernille Erland; Kirkelund, Gunvor Marie;

    2012-01-01

    Electrodialytic soil remediation is a method for removal of heavy metals. Good results have previously been obtained with both treatment of a stationary, water saturated soil matrix and with remediation of a stirred suspension of soil in water. The two different setups have different uses...... without a short distance between the membranes. The acidification of the suspended soil was fastest and following the mobilization of heavy metals. This may indicate that water splitting at the anion exchange membrane is used more efficiently in the stirred setup........ The first as in-situ or on-site treatment when there is no requirement for fast remediation, as the removal rate of the heavy metals are dependent on the distance between the electrodes (everything else equal) and in such application the electrode spacing must have a certain distance (often meters...

  9. Heavy metal hazards of Nigerian herbal remedies

    Energy Technology Data Exchange (ETDEWEB)

    Obi, E. [Toxicology Unit, Department of Pharmacology, College of Health Sciences, Nnamdi Azikiwe University, Nnewi (Nigeria); Akunyili, Dora N. [National Agency of Food and Drug Administration and Control (NAFDAC), Lagos (Nigeria); Ekpo, B. [Department of Biochemistry, College of Medical Sciences, Abia State University, Uturu (Nigeria); Orisakwe, Orish E. [Toxicology Unit, Department of Pharmacology, College of Health Sciences, Nnamdi Azikiwe University, Nnewi (Nigeria)]. E-mail: eorish@yahoo.com

    2006-10-01

    The uses of herbal products are not regulated in Nigeria and in many low-income countries and are freely available to everyone. The safety of these herbal medicines is poorly understood. This study characterizes the content of cadmium, copper, iron, nickel, selenium, zinc, lead and mercury in a random sample of Nigerian traditional products. Ready-to-use herbal products were purchased from the open market and digested using HNO{sub 3}.The heavy metal content of the digested filtrate was determined by atomic absorption spectrometry Uni-cam Model 929. The result showed that 100% of the samples contained elevated amounts of heavy metals. These data alert us to the possibility of heavy metal toxicity from herbal products in Nigeria. The public health hazards from ingestion of herbal medicines should be identified and disclosed by in-depth risk assessment studies.

  10. Trace Metals and Volatile Aromatic Hydrocarbon Content of ...

    African Journals Online (AJOL)

    Michael Horsfall

    done with a view to assessing the level of attenuation of this particular group of crude hydrocarbons and the changes. /effects of some trace metals in the impacted soils. The aromatic hydrocarbon ... Nigeria has had its fair share of crude oil pollution. This problem is ... disintegration of natural organometalic plant metabolites.

  11. Novel modified pectin for heavy metal adsorption

    Institute of Scientific and Technical Information of China (English)

    Feng Ting Li; Hong Yang; Yan Zhao; Ran Xu

    2007-01-01

    Modified pectin cross-linked with adipic acid, was synthesized and used for heavy metal removal from wastewater. SEM and FrIR were used to investigate its structure and morphology. The modified pectin had a rough, porous phase covered with carboxy groups, resulting a high adsorption capacity. And at the room temperature, the saturated loading capacity for Pb2+, Cu2+ and Zn2+ reached 1.82 mmol/g, 1.794 mmol/g and 0.964 mmol/g, respectively. The results proved its potential application to remove of the heavy metal.

  12. Enhanced reactive metal wall for dehalogenation of hydrocarbons

    Science.gov (United States)

    Howson, Paul E.; Mackenzie, Patricia D.; Horney, David P.

    1996-01-01

    A method is provided for remediation of contaminated solutions using a tiered metal wall or column. The tiered metal wall or column has at least three zones with graduated sizes of reducing metal particles. Contaminated solutions pass through the tiered wall or column to dehalogenate contaminant halogenated hydrocarbons.

  13. Enhanced reactive metal wall for dehalogenation of hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Howson, P.E.; Mackenzie, P.D.; Horney, D.P.

    1996-08-06

    A method is provided for remediation of contaminated solutions using a tiered metal wall or column. The tiered metal wall or column has at least three zones with graduated sizes of reducing metal particles. Contaminated solutions pass through the tiered wall or column to dehalogenate contaminant halogenated hydrocarbons. 3 figs.

  14. Heavy metal pollutant tolerance of Azolla pinnata

    Energy Technology Data Exchange (ETDEWEB)

    Sarkar, A.; Jana, S.

    1986-01-01

    The effects of Hg, As, Pb, Cu, Cd, and Cr (1,2 and 5 mg L/sup -1/ each) on Azolla pinnata R. Br. were analyzed. The treatments (2 and 5 mg L/sup -1/) of the heavy metal pollutants decreased Hill activity, chlorophyll, protein and dry wt, and increased tissue permeability over control values. The effects were most pronounced with the treatment of 5 mg L/sup -1/. The harmful effects of the metals were, in general, found by the treatments in the order: Cd > Hg > Cu > As > Pb > Cr. There was no significant change in these parameters at 1 mg L/sup -1/ of the metals over control. Thus Azolla pinnata shows tolerance to the heavy metals tested up to 1 mg L/sup -1/ each.

  15. Esterase resistant to inactivation by heavy metals

    KAUST Repository

    El, Dorry Hamza

    2014-09-25

    EstATII is an esterase that a halotolerant, thermophilic and resistant to a spectrum of heavy metals including toxic concentration of metals. It was isolated from the lowest convective layer of the Atlantis II Red Sea brine pool. The Atlantis II brine pool is an extreme environment that possesses multiple harsh conditions such as; high temperature, salinity, pH and high concentration of metals, including toxic heavy metals. A fosmid metagenomic library using DNA isolated from the lowest convective layer this pool was used to identify EstATII. Polynucleotides encoding EstATII and similar esterases are disclosed and can be used to make EstATII. EstATII or compositions or apparatuses that contain it may be used in various processes employing lipases/esterases especially when these processes are performed under harsh conditions that inactivate other kinds of lipases or esterases.

  16. Heavy metal detoxification in eukaryotic microalgae.

    Science.gov (United States)

    Perales-Vela, Hugo Virgilio; Peña-Castro, Julián Mario; Cañizares-Villanueva, Rosa Olivia

    2006-06-01

    Microalgae are aquatic organisms possessing molecular mechanisms that allow them to discriminate non-essential heavy metals from those essential ones for their growth. The different detoxification processes executed by algae are reviewed with special emphasis on those involving the peptides metallothioneins, mainly the post transcriptionally synthesized class III metallothioneins or phytochelatins. Also, the features that make microalgae suitable organisms technologies specially to treat water that is heavily polluted with metals is discussed.

  17. Electrokinetic removal of heavy metals from soil

    Directory of Open Access Journals (Sweden)

    Puvvadi Venkata Sivapullaiah

    2015-03-01

    Full Text Available Removal of heavy metal ions from soils by electrokinetic treatment has several advantages. The extent of removal, however, is both soil specific and ion specific. The conditions to be maintained have to be established based on laboratory studies. With a view to maximize the removal of metal ions the trends of removal of heavy metal ions such as iron, nickel and cadmium form a natural Indian kaolinitic red earth during different conditions maintained in the electrokinetic extraction process are studied. A laboratory electrokinetic extraction apparatus was assembled for this purpose. Attempts are also made to elucidate the mechanism of removal of the metal ions from soil. The composition of the flushing fluid, voltage and duration of extraction are varied. While dilute acetic acid has been used to neutralize the alkalinity that develops at the cathode, EDTA solution has been used to desorb heavy metals from clay surface. Generally the extent of removal was proportional to the osmotic flow. Nickel and Cadmium are more effectively removed than iron. The percentage removal of Ni is generally proportional to the osmotic flow but shows sensitivity to the pH of the system. There is an optimum voltage for removal of metal ions from soil. The removal of iron was negligible under different conditions studied.

  18. BIOACCUMULATION OF HEAVY METALS IN FORAGE GRASSES

    Directory of Open Access Journals (Sweden)

    Adam Łukowski

    2017-02-01

    Full Text Available The aim of this study was estimation of bioaccumulation of heavy metals (Pb, Ni, Cu, Zn, Cd in forage grasses from the area of Podlasie Province based on the bioaccumulation factor. In the soil samples the pH, organic carbon content and CEC were determined. Determination of heavy metals contents in plant and soil material was carried out by flame atomic absorption spectrometry. Soils were characterized mainly by acidic reaction, high cation exchange capacity and organic carbon content. The content of heavy metals in studied forage grasses did not exceed the polish regulations related to plant usage for feeding purposes, except the lead content in seven samples. Coefficients of variation for particular heavy metals content in studied forage grasses were as follows: Pb - 37%, Ni - 63%, Cu - 30%, Zn - 34%, Cd - 48%. The highest bioaccumulation factor was found for nickel and grass from the village Remieńkiń (11.54, while the lowest for cadmium and grass from the village Jemieliste (0.04.

  19. Heavy metals extraction from anaerobically digested sludge

    NARCIS (Netherlands)

    Marchioretto, M.M.; Bruning, H.; Loan, N.T.P.; Rulkens, W.H.

    2002-01-01

    This paper reports on the chemical extraction efficiency in the removal of heavy metals from sludge from an activated-sludge system, which receives as influent both industrial and municipal wastewater. Utilizing a series of chemical extractants in a sequential order comprised the first phase of the

  20. Hydroponics reducing effluent's heavy metals discharge.

    Science.gov (United States)

    Rababah, Abdellah; Al-Shuha, Ahmad

    2009-01-01

    This paper investigates the capacity of Nutrient Film Technique (NFT) to control effluent's heavy metals discharge. A commercial hydroponic system was adapted to irrigate lettuces with primary treated wastewater for studying the potential heavy metals removal. A second commercial hydroponic system was used to irrigate the same type of lettuces with nutrient solution and this system was used as a control. Results showed that lettuces grew well when irrigated with primary treated effluent in the commercial hydroponic system. The NFT-plant system heavy metals removal efficiency varied amongst the different elements, The system's removal efficiency for Cr was more than 92%, Ni more than 85%, in addition to more than 60% reduction of B, Pb, and Zn. Nonetheless, the NFT-plants system removal efficiencies for As, Cd and Cu were lower than 30%. Results show that lettuces accumulated heavy metals in leaves at concentrations higher than the maximum acceptable European and Australian levels. Therefore, non-edible plants such as flowers or pyrethrum are recommended as value added crops for the proposed NFT.

  1. Heavy metals in MSW incineration fly ashes

    DEFF Research Database (Denmark)

    Ferreira, Celia; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.

    2003-01-01

    Incineration is a common solution for dealing with the increasing amount of municipal solid waste (MSW). During the process, the heavy metals initially present in the waste go through several transformations, ending up in combustion products, such as fly ash. This article deals with some issues r...

  2. Heavy metals extraction from anaerobically digested sludge

    NARCIS (Netherlands)

    Marchioretto, M.M.; Bruning, H.; Loan, N.T.P.; Rulkens, W.H.

    2002-01-01

    This paper reports on the chemical extraction efficiency in the removal of heavy metals from sludge from an activated-sludge system, which receives as influent both industrial and municipal wastewater. Utilizing a series of chemical extractants in a sequential order comprised the first phase of the

  3. Phytoremediation of heavy metals: Recent techniques | Jadia ...

    African Journals Online (AJOL)

    African Journal of Biotechnology ... microorganisms/biomass or live plants to clean polluted areas. ... of the plants. A brief review on phytoremediation of heavy metals and its effect on plants have been compiled to provide a wide applicability of ...

  4. Heavy metal contamination in TIMS Branch sediments

    Energy Technology Data Exchange (ETDEWEB)

    Pickett, J.B.

    1990-06-25

    The objective of this memorandum is to summarize results of previous sediment studies on Tims Branch and Steed's Pond conducted by Health Protection (HP) and by the Savannah River Laboratory (SRL) in conjunction with Reactor Materials Engineering Technology (RMET). The results for other heavy metals, such as lead, nickel, copper, mercury, chromium, cadmium, zinc, and thorium are also summarized.

  5. Heavy metal contamination in TIMS Branch sediments

    Energy Technology Data Exchange (ETDEWEB)

    Pickett, J.B.

    1990-06-25

    The objective of this memorandum is to summarize results of previous sediment studies on Tims Branch and Steed`s Pond conducted by Health Protection (HP) and by the Savannah River Laboratory (SRL) in conjunction with Reactor Materials Engineering & Technology (RMET). The results for other heavy metals, such as lead, nickel, copper, mercury, chromium, cadmium, zinc, and thorium are also summarized.

  6. Electrodialytic decontamination of heavy metal polluted soil

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Hansen, Henrik K.; Karlsmose, Bodil

    1996-01-01

    Electrodialytic remediation of heavy metal polluted soil is a newly developed method, which combines the electrokinetic mevement of ions in soil with the principle of electrodialytis. The method has been proven to work in laboratory scale and at present two types of pilot plant tests are made....

  7. Heavy metals in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Storm, G.L. [Fish and Wildlife Service, University Park, PA (United States); Fosmire, G.J. [Dept. of Nutrition, University Park, PA (United States); Bellis, E.D. [Pennsylvania State Univ., University Park, PA (United States)

    1994-05-01

    Concentration (Cd, Pb, Zn, and Cu) in soil and wildlife at the Palmerton zinc smelter site in eastern Pennsylvania were determined 6 yr after zinc smelting was terminated in 1980. Levels of the four metals were higher in litter (01 and 02 horizon) than in soil (A1 horizon), and the metals were at or near levels when the smelters were still in operation. Levels of metals in sod weft highest at sites close to the smelters and decreased as distances from the smelters increased. The relation of decreasing amounts of metals in body tissues with increasing distance from the smelters also held true for amphibians and mammals. An exception to this relation was higher level of Cu in red-lacked salamanders (Plethodon cinereus) captured {approx}17 km downwind than those captured {approx}12 km downwind. Levels of Zn, Pb, and Co in liver, kidney, and muscle tissue of white-footed mice (Peromyscus leucopus) were not different (P >0.05) among sites. Cadmium in kidneys in white-footed mice exceeded 10 mg&& which is reportedly considered an indication of environmental contamination. Levels of Cd in kidneys and liver of white-tailed deer (Odocoileus virginianus) at Palmerton were five times higher than those for white-tailed deer collected 180 km southwest of Palmerton in southcentral Pennsylvania. The abnormal amounts of metals in the tissues of terrestrial vertebrates, and the absence or low abundance of wildlife at Palmerton indicated that ecological processes within 5 km of the smelters were markedly influenced 6 yr after zinc smelting was discontinued. 41 refs., 5 figs., 4 tabs.

  8. Metabolic Demands of Heavy Metal Drumming

    Directory of Open Access Journals (Sweden)

    Bryan Romero

    2016-07-01

    Full Text Available Background: The drum set involves dynamic movement of all four limbs. Motor control studies have been done on drum set playing, yet not much is known about the physiological responses to this activity. Even less is known about heavy metal drumming. Aims: The purpose of this study was to determine metabolic responses and demands of heavy metal drumming. Methods: Five semi-professional male drummers (mean ± SD age = 27.4 ± 2.6 y, height = 177.2 ± 3.8 cm, body mass = 85.1 ± 17.8 kg performed four prescribed and four self-selected heavy metal songs. Oxygen consumption (VO2, minute ventilation (VE and respiratory exchange ratio (RER were measured using a metabolic cart.  Heart rate (HR was measured using a heart rate monitor. VO2max was determined using a graded cycle ergometer test. Results: The results indicated a metabolic cost of 6.3 ± 1.4 METs and heart rate of 145.1 ± 15.7 beats·min-1 (75.4 ± 8.3% of age-predicted HRmax. VO2 peak values reached approximately 90% of the drummer’s VO2max when performing at the fastest speeds. According to these results, heavy metal drumming may be considered vigorous intensity activity (≥ 6.0 METs. The relative VO2max of 40.2 ± 9.5 mL·kg·min-1 leads to an aerobic fitness classification of “average” for adult males. Conclusions: The metabolic demands required during heavy metal drumming meet the American College of Sports Medicine guidelines for the development of health related fitness.  Keywords: Drum set, Exercise physiology, VO2, Music

  9. Use of Sapropel for Removal of Heavy Metals from Solution

    National Research Council Canada - National Science Library

    Rūta Birgėlaitė; Vaidotas Valskys; Gytautas Ignatavičius

    2016-01-01

    ... composition of sapropel research is very few. The article deals with silicon sapropel as a sorbent is able to absorb heavy metals from the solution depending on the time and the concentration of heavy metals in the solution...

  10. Assessment of heavy metal pollution in soils along major roadside ...

    African Journals Online (AJOL)

    EJIRO

    Key words: Heavy metal contamination, roadside soils, enrichment factors, contamination factor, pollution load index ... The objectives of the present work were to: (1) Assess heavy metal ..... the basis of Varimax orthogonal rotation with Kaiser.

  11. Leaching of heavy metals from steelmaking slags

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, J. F. P.; Pino, C. G.

    2006-07-01

    Leaching tests with EAF and Ladle slags were performed, using a flow through tests and the standard batch test DIN 38414-S4. The previous method was used to simulate the leaching behaviour of steel slags under landfill. the chemical analysis of the leachates during this period shows, in general, for both types of slag, and increase of heavy metal releases with ageing. Standard test method DIN 38414-S4 was used to evaluate leachability of heavy metals by water in unprocessed slags. After more than one year of trials, slang samples submitted to these trials presented very low total leaching levels. The most extracted elements are calcium and magnesium. Nevertheless, in flow-though test, calcium and magnesium leached from solid slags are below 0.5% and all other metals below 0.1%. Leachates obtained with DIN 38414-S4 present, as expected, higher leaching values; however, these are inferior to 5% (Ca) and 1% (other elements). (Author) 12 refs.

  12. Heavy metal fates in laboratory bioretention systems.

    Science.gov (United States)

    Sun, Xueli; Davis, Allen P

    2007-01-01

    Key to managing heavy metals in bioretention is to understand their fates in bioretention facilities. In this study, pot prototypes filled with bioretention media were built to simulate the conditions of natural growth of plants. Synthetic runoff with different heavy metal loadings (copper, cadmium, lead, and zinc) was periodically applied. Metal accumulations in tissues of grasses -Panicum virgatum, Kentucky-31, and Bromus ciliatus, were investigated after 230d of growth and multiple runoff treatment events. After 183d of periodic runoff application, the concentrations of Zn, Cu, Pb and Cd with low and high loadings had the same trends in the plant tissues, Zn>Cu>Pb>Cd, following the trend of the input metal concentrations. The fates of input metals were 88-97% captured in soil media, 2.0-11.6% not captured by bioretention media, and 0.5-3.3% accumulated in plants. Compared to the metals retained by the soil, the percentages of input metals taken up by plants were relatively low due to the low plant biomass produced in this study. Greater biomass density would be required for the vegetation to have a valuable impact in prolonging the lifetime of a bioretention cell.

  13. Theory and Analysis of Classic Heavy Metal Harmony

    OpenAIRE

    Lilja, Esa

    2009-01-01

    This thesis explores melodic and harmonic features of heavy metal, and while doing so, explores various methods of music analysis; their applicability and limitations regarding the study of heavy metal music. The study is built on three general hypotheses according to which 1) acoustic characteristics play a significant role for chord constructing in heavy metal, 2) heavy metal has strong ties and similarities with other Western musical styles, and 3) theories and analytical methods of Wester...

  14. Plants Role in Reducing Heavy Metals from Polluted Soil Leachate

    OpenAIRE

    Amouei A.1 PhD,; Tashakkorian H.1 PhD,; Naghipour D.2 PhD,; Mohammadi P.3 MSc

    2015-01-01

    Aims In the past few decades, more attention has been paid to clean up soils polluted with heavy metals by plants. A serious problem in this way is the amount of heavy metals uptake by plants. This study was conducted to evaluate the effectiveness of 3 local plants of Mazandaran province, Iran, in reducing and controlling the soil’s heavy metals. Instrument & Methods The removal amount of three heavy metals (lead, zinc and cadmium) by native plants (maize, velvetleaf and wild a...

  15. Heavy metal removal from sediments by biosurfactants.

    Science.gov (United States)

    Mulligan, C N; Yong, R N; Gibbs, B F

    2001-07-30

    Batch washing experiments were used to evaluate the feasibility of using biosurfactants for the removal of heavy metals from sediments. Surfactin from Bacillus subtilis, rhamnolipids from Pseudomonas aeruginosa and sophorolipid from Torulopsis bombicola were evaluated using a metal-contaminated sediment (110mg/kg copper and 3300mg/kg zinc). A single washing with 0.5% rhamnolipid removed 65% of the copper and 18% of the zinc, whereas 4% sophorolipid removed 25% of the copper and 60% of the zinc. Surfactin was less effective, removing 15% of the copper and 6% of the zinc. The technique of ultrafiltration and zeta potential measurements were used to determine the mechanism of metal removal by the surfactants. It was then postulated that metal removal by the biosurfactants occurs through sorption of the surfactant on to the soil surface and complexation with the metal, detachment of the metal from the soil into the soil solution and hence association with surfactant micelles. Sequential extraction procedures were used on the sediment to determine the speciation of the heavy metals before and after surfactant washing. The carbonate and oxide fractions accounted for over 90% of the zinc present in the sediments. The organic fraction constituted over 70% of the copper. Sequential extraction of the sediments after washing with the various surfactants indicated that the biosurfactants, rhamnolipid and surfactin could remove the organically-bound copper and that the sophorolipid could remove the carbonate and oxide-bound zinc. Therefore, heavy metal removal from sediments is feasible and further research will be conducted.

  16. Heavy Metal Concentrations in Maltese Potable Water

    Directory of Open Access Journals (Sweden)

    Roberta Bugeja

    2015-05-01

    Full Text Available This study evaluates the levels of aluminum (Al, cadmium (Cd, chromium (Cr, copper (Cu, iron (Fe, lead (Pb, nickel (Ni and zinc (Zn in tap water samples of forty localities from around the Maltese Islands together with their corresponding service supply reservoirs. The heavy metal concentrations obtained indicated that concentrations of the elements were generally below the maximum allowed concentration established by the Maltese legislation. In terms of the Maltese and EU water quality regulations, 17.5% of the localities sampled yielded water that failed the acceptance criteria for a single metal in drinking water. Higher concentrations of some metals were observed in samples obtained at the end of the distribution network, when compared to the concentrations at the source. The observed changes in metal concentrations between the localities’ samples and the corresponding supply reservoirs were significant. The higher metal concentrations obtained in the samples from the localities can be attributed to leaching in the distribution network.

  17. Determination of some heavy metals concentration in the tissues of ...

    African Journals Online (AJOL)

    Jen

    (Hg), Cadmium (Cd), Arsenic (As), Chromium (Cr) and Lead (Pb). They are natural ... Heavy metals poisoning could result for instance, from drinking water contamination ... The high level of pollution caused by heavy metals and their .... measures need to be taken in order to prevent future heavy metal pollution. References.

  18. Arbuscular Mycorrhizal Fungi Can Benefit Heavy Metal Tolerance and Phytoremediation

    Science.gov (United States)

    Forgy, David

    2012-01-01

    Sites contaminated by heavy metals, such as industrial waste sites, create unwelcoming environments for plant growth. Heavy metals can have a wide range of toxic effects such as replacing essential elements or disrupting enzyme function. While some heavy metals are essential to plant nutrition at low concentrations, high concentrations of any…

  19. Effect of Heavy Metal Pollution on Cucumber POD Isoenzyme

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The Experiment was carried out to study heavy metal pollution effect on cucumber POD isozyme in our experiment.The results showed that:the activities of POD in cucumber seeds increased in low concentration treatment,and decreased in high concentration treatment after being treated with heavy metal.The critical band patterns of POD isoenzyme was changed by heavy metal pollution.

  20. Arbuscular Mycorrhizal Fungi Can Benefit Heavy Metal Tolerance and Phytoremediation

    Science.gov (United States)

    Forgy, David

    2012-01-01

    Sites contaminated by heavy metals, such as industrial waste sites, create unwelcoming environments for plant growth. Heavy metals can have a wide range of toxic effects such as replacing essential elements or disrupting enzyme function. While some heavy metals are essential to plant nutrition at low concentrations, high concentrations of any…

  1. Customizable Biopolymers for Heavy Metal Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Kostal, Jan; Prabhukumar, Giridhar; Lao, U. Loi; Chen Alin; Matsumoto, Mark; Mulchandani, Ashok; Chen, Wilfred [University of California, Department of Chemical and Environmental Engineering (United States)], E-mail: wilfred@engr.ucr.edu

    2005-10-15

    Nanoscale materials have been gaining increasing interest in the area of environmental remediation because of their unique physical, chemical and biological properties. One emerging area of research has been the development of novel materials with increased affinity, capacity, and selectivity for heavy metals because conventional technologies are often inadequate to reduce concentrations in wastewater to acceptable regulatory standards. Genetic and protein engineering have emerged as the latest tools for the construction of nanoscale materials that can be controlled precisely at the molecular level. With the advent of recombinant DNA techniques, it is now possible to create 'artificial' protein polymers with fundamentally new molecular organization. The most significant feature of these nanoscale biopolymers is that they are specifically pre-programmed within a synthetic gene template and can be controlled precisely in terms of sizes, compositions and functions at the molecular level. In this review, the use of specifically designed protein-based nano-biomaterials with both metal-binding and tunable properties for heavy metal removal is summarized. Several different strategies for the selective removal of heavy metals such as cadmium and mercury are highlighted.

  2. Effects of Heavy Metals on Activated Sludge Microorganism

    Institute of Scientific and Technical Information of China (English)

    XIE Bing; XI Dan-li; CHEN Ji-hua

    2002-01-01

    The efforts of heavy metals on activated sludge microorganisms are reviewed. Although some heavy metals play an important role in the life of microorganism, heavy metals concentrations above toxic levels inhibit biological processes. Copper, zinc, nickel,cadmium and chromium were mostly studied because of their toxicity and widely used, regardless of single or combination. The microorganism response to these heavy metals varied with species and concentrations of metals,factors such as pH, sludge age, MLSS etc. also affect toxicity on the microorganism. The acclimation could extend the microorganism tolerance of heavy metals. The effects of heavy metals on sludge microorganisms could be described with different models, such as Sigmoidal and Monod equation. The kinetic constants are the useful indexes to estimate the heavy metals inhibition on activated sludge system. Methods to measure the toxicity and effects on microorganism community were also reviewed.

  3. Electrodialytic remediation of heavy metal polluted soil

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Jensen, Pernille Erland; Kirkelund, Gunvor Marie

    2012-01-01

    Electrodialytic soil remediation is a method for removal of heavy metals. Good results have previously been obtained with both treatment of a stationary, water saturated soil matrix and with remediation of a stirred suspension of soil in water. The two different setups have different uses......). In the stirred setup it is possible to shorten the transport route to few mm and to have a faster and continuous process. The present paper for the first time reports a direct comparison of the two options. The remediation of the stirred suspension showed faster than remediation of the water saturated soil even...... without a short distance between the membranes. The acidification of the suspended soil was fastest and following the mobilization of heavy metals. This may indicate that water splitting at the anion exchange membrane is used more efficiently in the stirred setup....

  4. HEAVY METALS IN PRODUCTIVE PARTS OF AGRICULTURAL PLANTS

    Directory of Open Access Journals (Sweden)

    Július Árvay

    2012-02-01

    Full Text Available The contents of heavy metals in plants were not in relation to contents of heavy metals in soil. Increased content of heavy metals in soils was not in consistency with content in plants. Usually content of heavy metals in plants according to our results were lower than their content in soil. Only the over limit contents of copper and cadmium were assessed in grain of barley and oat. The results of heavy metals content showed that dominant part on content of elements in plants have their mobile forms what depends on pH, content of organic matter in soil and portion of clay parts.

  5. HEAVY METALS IN PRODUCTIVE PARTS OF AGRICULTURAL PLANTS

    OpenAIRE

    Július Árvay; Ján Tomáš; Tomáš Tóth

    2012-01-01

    The contents of heavy metals in plants were not in relation to contents of heavy metals in soil. Increased content of heavy metals in soils was not in consistency with content in plants. Usually content of heavy metals in plants according to our results were lower than their content in soil. Only the over limit contents of copper and cadmium were assessed in grain of barley and oat. The results of heavy metals content showed that dominant part on content of elements in plants have their mobil...

  6. Heavy metal transfer from atmosphere to plants

    Science.gov (United States)

    Asta, J.; Guillard, E.; Tissut, M.; Gaude, T.; Ravanel, P.

    2003-05-01

    Heavy metal contamination due to traffic was studied in the water basin of the Aiguebelette lake (Savoie, France) in the alpine chain. It is surrounded by mountains and crossed by a highway on a 6-km-distance. Contamination of lichens, mosses, barks and dead leaves litters were submitted to a comparative study. The quantities of six metals (Pb, Al, Cd, Zn, Mn, Ni) were estimated in each of these materials. Except for Al which was highly concentrated in Xanthoria parietina and to a lesser extent in mosses, all the matrices accumulated the metals in a relatively similar way. The hyperaccumulation factor varied from 2 to 258, depending on the sampling point on the studied metal and on the matrix. Bark represented a long-term accumulator and contained more lead than the other matrices. In the studied water basin, a specific atmospheric movement allowed to distribute the contaminants far away from the highway, especially on the west slope of the highest mountain.

  7. Multiple heavy metal removal using an entomopathogenic fungi Beauveria bassiana.

    Science.gov (United States)

    Gola, Deepak; Dey, Priyadarshini; Bhattacharya, Arghya; Mishra, Abhishek; Malik, Anushree; Namburath, Maneesh; Ahammad, Shaikh Ziauddin

    2016-10-01

    Towards the development of a potential remediation technology for multiple heavy metals [Zn(II), Cu(II), Cd(II), Cr(VI) and Ni(II)] from contaminated water, present study examined the growth kinetics and heavy metal removal ability of Beauveria bassiana in individual and multi metals. The specific growth rate of B. bassiana varied from 0.025h(-1) to 0.039h(-1) in presence of individual/multi heavy metals. FTIR analysis indicated the involvement of different surface functional groups in biosorption of different metals, while cellular changes in fungus was reflected by various microscopic (SEM, AFM and TEM) analysis. TEM studies proved removal of heavy metals via sorption and accumulation processes, whereas AFM studies revealed increase in cell surface roughness in fungal cells exposed to heavy metals. Present study delivers first report on the mechanism of bioremediation of heavy metals when present individually as well as multi metal mixture by entomopathogenic fungi.

  8. Heavy metals in carabids (Coleoptera, Carabidae

    Directory of Open Access Journals (Sweden)

    Ruslan Butovsky

    2011-05-01

    Full Text Available Carabid beetles (Coleoptera, Carabidae are one of the most studied soil groups in relation to heavy metal (HM accumulation and use for bioindication of environmental pollution. Accumulation of Zn and Cu in carabid beetles was species-, sex- and trophic group-specific. No differences were found in HM contents between omnivorous and carnivorous species. The use of carabid beetles as indicators of HM accumulation appears to be rather limited.

  9. Modeling Heavy Metal Removal in Wetlands.

    Science.gov (United States)

    1992-05-01

    1976 a,b,c) and Pettersson (1976) treated heavy metals uptake according to Michaelis-Menten kinetics ( Lehninger , 1975), discussed later in detail...copper kinetics equation as used in this modeling effort is presented below, after Lehninger (1975): dv_ dV, Ca (5) dt dt C.+K, where: v = rate of copper...the bulk solution, Cb, using either the Lineweaver-Burk double reciprocal or Eadie-Hofstee graphical methods ( Lehninger , 1975). Nielsen (1976 b) used

  10. Heavy metals bioaccumulation by edible saprophytic mushrooms

    OpenAIRE

    ŠIRIĆ, Ivan; KOS, Ivica; Ante KASAP; Fran PETKOVIĆ; Držaić, Valentino

    2016-01-01

    The aim of this study was to determine the concentration of heavy metals Fe, Zn, Cu, Ni, Pb i Cd in certain edible species of saprophytic fungi and the substrate on three area of sampling, and to assess the role of individual species as biological indicators of environmental pollution. In this study were used three species of wild edible mushrooms (Agaricus macroarpus Bohus, Clitocybe inversa (Scop. ex Fr.) Pat. and Macrolepiota procera (Scop. ex Fr.) Sing.,). Completely developed and mature ...

  11. Heavy Metals Acting as Endocrine Disrupters

    Directory of Open Access Journals (Sweden)

    Bogdan Georgescu

    2011-10-01

    Full Text Available Last years researches focused on several natural and synthetic compounds that may interfere with the major functionsof the endocrine system and were termed endocrine disrupters. Endocrine disrupters are defined as chemicalsubstances with either agonist or antagonist endocrine effects in human and animals. These effects may be achievedby interferences with the biosynthesis or activity of several endogenous hormones. Recently, it was demonstratedthat heavy metals such as cadmium (Cd, arsen (As, mercury (Hg, nickel (Ni, lead (Pb and zinc (Zn may exhibitendocrine-disrupting activity in animal experiments. Emerging evidence of the intimate mechanisms of action ofthese heavy metals is accumulating. It was revealed, for example, that the Zn atom from the Zn fingers of theestrogen receptor can be replaced by several heavy metal molecules such as copper, cobalt, Ni and Cd. By replacingthe Zn atom with Ni or copper, binding of the estrogen receptor to the DNA hormone responsive elements in the cellnucleus is prevented. In both males and females, low-level exposure to Cd interferes with the biological effects ofsteroid hormones in reproductive organs. Arsen has the property to bind to the glucocorticoid receptor thusdisturbing glucocorticoids biological effects. With regard to Hg, this may induce alterations in male and femalefertility, may affect the function of the hypothalamo-pituitary-thyroid axis or the hypothalamo-pituitary-adrenal axis,and disrupt biosynthesis of steroid hormones.

  12. Removal of heavy metals using waste eggshell

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The removal capacity of toxic heavy metals by the reused eggshell was studied. As a pretreatment process for the preparation of reused material from waste eggshell, calcination was performed in the furnace at 800℃ for 2 h after crushing the dried waste eggshell. Calcination behavior, qualitative and quantitative elemental information, mineral type and surface characteristics before and after calcination of eggshell were examined by thermal gravimetric analysis (TGA), X-ray fluorescence (XRF), X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. After calcination, the major inorganic composition was identified as Ca (lime, 99.63%) and K, P and Sr were identified as minor components. When calcined eggshell was applied in the treatment of synthetic wastewater containing heavy metals, a complete removal of Cd as well as above 99% removal of Cr was observed after 10 min. Although the natural eggshell had some removal capacity of Cd and Cr, a complete removal was not accomplished even after 60 min due to quite slower removal rate. However, in contrast to Cd and Cr, an efficient removal of Pb was observed with the natural eggshell rather than the calcined eggshell. From the application of the calcined eggshell in the treatment of real electroplating wastewater, the calcined eggshell showed a promising removal capacity of heavy metal ions as well as had a good neutralization capacity in the treatment of strong acidic wastewater.

  13. Heavy metal emissions for Danish road transport

    Energy Technology Data Exchange (ETDEWEB)

    Winther, M.; Slentoe, E.

    2010-04-15

    This report presents new heavy metal emission factors for cars, vans, trucks, buses, mopeds and motorcycles for each of the emission sources fuel consumption, engine oil, tyre wear, brake wear and road abrasion. The emission components covered are Arsenic (As), Cadmium (Cd), Chromium (Cr), Copper (Cu), Mercury (Hg), Nickel (Ni), Lead (Pb), Selenium (Se) and Zinc (Zn), all of them relevant for emission reporting to the UNECE CLRTAP (United Nations Economic Commission for Europe Convention on Long Range Transboundary Pollutants) convention. The report also presents a new Danish inventory for the year 2007. The following emissions in total TSP (in brackets) are calculated for the year 2007: As (8 kg), Cd (48 kg), Cr (197 kg), Cu (51 779 kg), Hg (28 kg), Ni (158 kg), Pb (6 989 kg), Se (33 kg) and Zn (28 556 kg). Per vehicle type cars are the most important source of emission for all heavy metal species, followed by vans, trucks, buses and 2-wheelers. By using the detailed emission factors and inventory calculation methods established in the present project, estimates of heavy metal emissions can be made for other years than 2007. (author)

  14. Evaluation of Heavy and Trace Metals in Fingernails of Young ...

    African Journals Online (AJOL)

    WAHAB

    reference to the harmful effects of cadmium, mercury ... metalloid such as arsenic, regardless of density ... Heavy metal poisoning could results for instance, from ... metals from the samples or depositing metals on them. ... prevent foaming.

  15. Phytoremediation of Heavy Metals in Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Felix Aibuedefe AISIEN

    2010-12-01

    Full Text Available One of the major environmental problems is the pollution of water and soil by toxic heavy metals. This study investigated the phytoremediation potential of water hyacinth, for the removal of cadmium (Cd, lead (Pb and zinc (Zn. Water hyacinths were cultured in bore-hole water, supplemented with 5mg/l of Zn and Pb and 1mg/l of Cd at pH 4.5, 6.8 and 8.5. The plants were separately harvested each week for six weeks. The results showed that removal of these metals from solution was fast especially in the first two weeks, after which it became gradual till saturation point was reached. The accumulation of Cd and Zn in leaves and roots increased with increase in pH. The highest accumulation was in the roots with metal concentration of 4870mg/kg, 4150mg/kg and 710mg/kg for Zn, Pb and Cd respectively at pH 8.5. The maximum values of bioconcentration factor (BCF for Zn, Pb and Cd were 1674, 1531 and 1479 respectively, suggesting that water hyacinth was good accumulator of Zn, Pb and Cd, and could be used to treat industrial wastewater contaminated with heavy metals such as Zn, Pb and Cd.

  16. Environmental impact of heavy metal pollution in natural aquatic systems

    OpenAIRE

    Tayab, Muhammad Rehan

    1991-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. The distribution of heavy metals between soil and soil solutions is a key issue in evaluating the environmental impact of long term applications of heavy metals to land. Contamination of soils by heavy metals has been reported by many workers. Metal adsorption is affected by many factors, including soil pH, clay mineralogy, abundance of oxides and organic matter, soil composition and solution...

  17. Material Removes Heavy Metal Ions From Water

    Science.gov (United States)

    Philipp, Warren H., Jr.; Street, Kenneth W.; Hill, Carol; Savino, Joseph M.

    1995-01-01

    New high capacity ion-exchange polymer material removes toxic metal cations from contaminated water. Offers several advantages. High sensitivities for such heavy metals as lead, cadmium, and copper and capable of reducing concentrations in aqueous solutions to parts-per-billion range. Removes cations even when calcium present. Material made into variety of forms, such as thin films, coatings, pellets, and fibers. As result, adapted to many applications to purify contaminated water, usually hard wherever found, whether in wastewater-treatment systems, lakes, ponds, industrial plants, or homes. Another important feature that adsorbed metals easily reclaimed by either destructive or nondestructive process. Other tests show ion-exchange polymer made inexpensively; easy to use; strong, flexible, not easily torn; and chemically stable in storage, in aqueous solutions, and in acidic or basic solution.

  18. Magnetotactic bacteria. Promising biosorbents for heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Wei; Zhang, Yanzong; Ding, Xiaohui; Liu, Yan; Shen, Fei; Zhang, Xiaohong; Deng, Shihuai; Xiao, Hong; Yang, Gang; Peng, Hong [Sichuan Agricultural Univ., Chengdu (China). Provincial Key Lab. of Agricultural Environmental Engineering

    2012-09-15

    Magnetotactic bacteria (MTB), which can orient and migrate along a magnetic line of force due to intracellular nanosized magnetosomes, have been a subject of research in the medical field, in dating environmental changes, and in environmental remediation. This paper reviews the recent development of MTB as biosorbents for heavy metals. Ultrastructures and taxis of MTB are investigated. Adsorptions in systems of unitary and binary ions are highlighted, as well as adsorption conditions (temperature, pH value, biomass concentration, and pretreatments). The separation and desorption of MTB in magnetic separators are also discussed. A green method to produce metal nanoparticles is provided, and an energy-efficient way to recover precious metals is put forward during biosorption. (orig.)

  19. HEAVY FERMIONS. Strange metal without magnetic criticality.

    Science.gov (United States)

    Tomita, Takahiro; Kuga, Kentaro; Uwatoko, Yoshiya; Coleman, Piers; Nakatsuji, Satoru

    2015-07-31

    A fundamental challenge to our current understanding of metals is the observation of qualitative departures from Fermi liquid behavior. The standard view attributes such non-Fermi liquid phenomena to the scattering of electrons off quantum critical fluctuations of an underlying order parameter. Although the possibility of non-Fermi liquid behavior isolated from the border of magnetism has long been speculated, no experimental confirmation has been made. Here, we report on the observation of a strange metal region away from a magnetic instability in an ultrapure single crystal. In particular, we show that the heavy-fermion superconductor β-YbAlB4 forms a possible phase with strange metallic behavior across an extensive pressure regime, distinctly separated from a high-pressure magnetic quantum phase transition by a Fermi liquid phase.

  20. Advances in Understanding How Heavy Metal Pollution Triggers Gastric Cancer

    Science.gov (United States)

    Yuan, Wenzhen; Yang, Ning

    2016-01-01

    With the development of industrialization and urbanization, heavy metals contamination has become a major environmental problem. Numerous investigations have revealed an association between heavy metal exposure and the incidence and mortality of gastric cancer. The mechanisms of heavy metals (lead, cadmium, mercury, chromium, and arsenic) contamination leading to gastric cancer are concluded in this review. There are four main potential mechanisms: (1) Heavy metals disrupt the gastric mucosal barrier by decreasing mucosal thickness, mucus content, and basal acid output, thereby affecting the function of E-cadherin and inducing reactive oxygen species (ROS) damage. (2) Heavy metals directly or indirectly induce ROS generation and cause gastric mucosal and DNA lesions, which subsequently alter gene regulation, signal transduction, and cell growth, ultimately leading to carcinogenesis. Exposure to heavy metals also enhances gastric cancer cell invasion and metastasis. (3) Heavy metals inhibit DNA damage repair or cause inefficient lesion repair. (4) Heavy metals may induce other gene abnormalities. In addition, heavy metals can induce the expression of proinflammatory chemokine interleukin-8 (IL-8) and microRNAs, which promotes tumorigenesis. The present review is an effort to underline the human health problem caused by heavy metal with recent development in order to garner a broader perspective.

  1. Advances in Understanding How Heavy Metal Pollution Triggers Gastric Cancer

    Directory of Open Access Journals (Sweden)

    Wenzhen Yuan

    2016-01-01

    Full Text Available With the development of industrialization and urbanization, heavy metals contamination has become a major environmental problem. Numerous investigations have revealed an association between heavy metal exposure and the incidence and mortality of gastric cancer. The mechanisms of heavy metals (lead, cadmium, mercury, chromium, and arsenic contamination leading to gastric cancer are concluded in this review. There are four main potential mechanisms: (1 Heavy metals disrupt the gastric mucosal barrier by decreasing mucosal thickness, mucus content, and basal acid output, thereby affecting the function of E-cadherin and inducing reactive oxygen species (ROS damage. (2 Heavy metals directly or indirectly induce ROS generation and cause gastric mucosal and DNA lesions, which subsequently alter gene regulation, signal transduction, and cell growth, ultimately leading to carcinogenesis. Exposure to heavy metals also enhances gastric cancer cell invasion and metastasis. (3 Heavy metals inhibit DNA damage repair or cause inefficient lesion repair. (4 Heavy metals may induce other gene abnormalities. In addition, heavy metals can induce the expression of proinflammatory chemokine interleukin-8 (IL-8 and microRNAs, which promotes tumorigenesis. The present review is an effort to underline the human health problem caused by heavy metal with recent development in order to garner a broader perspective.

  2. The Confluence of Heavy Metal Biooxidation and Heavy Metal Resistance: Implications for Bioleaching by Extreme Thermoacidophiles

    Directory of Open Access Journals (Sweden)

    Garrett Wheaton

    2015-07-01

    Full Text Available Extreme thermoacidophiles (Topt > 65 °C, pHopt < 3.5 inhabit unique environments fraught with challenges, including extremely high temperatures, low pH, as well as high levels of soluble metal species. In fact, certain members of this group thrive by metabolizing heavy metals, creating a dynamic equilibrium between biooxidation to meet bioenergetic needs and mechanisms for tolerating and resisting the toxic effects of solubilized metals. Extremely thermoacidophilic archaea dominate bioleaching operations at elevated temperatures and have been considered for processing certain mineral types (e.g., chalcopyrite, some of which are recalcitrant to their mesophilic counterparts. A key issue to consider, in addition to temperature and pH, is the extent to which solid phase heavy metals are solubilized and the concomitant impact of these mobilized metals on the microorganism’s growth physiology. Here, extreme thermoacidophiles are examined from the perspectives of biodiversity, heavy metal biooxidation, metal resistance mechanisms, microbe-solid interactions, and application of these archaea in biomining operations.

  3. Facultative hyperaccumulation of heavy metals and metalloids.

    Science.gov (United States)

    Pollard, A Joseph; Reeves, Roger D; Baker, Alan J M

    2014-03-01

    Approximately 500 species of plants are known to hyperaccumulate heavy metals and metalloids. The majority are obligate metallophytes, species that are restricted to metalliferous soils. However, a smaller but increasing list of plants are "facultative hyperaccumulators" that hyperaccumulate heavy metals when occurring on metalliferous soils, yet also occur commonly on normal, non-metalliferous soils. This paper reviews the biology of facultative hyperaccumulators and the opportunities they provide for ecological and evolutionary research. The existence of facultative hyperaccumulator populations across a wide edaphic range allows intraspecific comparisons of tolerance and uptake physiology. This approach has been used to study zinc and cadmium hyperaccumulation by Noccaea (Thlaspi) caerulescens and Arabidopsis halleri, and it will be instructive to make similar comparisons on species that are distributed even more abundantly on normal soil. Over 90% of known hyperaccumulators occur on serpentine (ultramafic) soil and accumulate nickel, yet there have paradoxically been few experimental studies of facultative nickel hyperaccumulation. Several hypotheses suggested to explain the evolution of hyperaccumulation seem unlikely when most populations of a species occur on normal soil, where plants cannot hyperaccumulate due to low metal availability. In such species, it may be that hyperaccumulation is an ancestral phylogenetic trait or an anomalous manifestation of physiological mechanisms evolved on normal soils, and may or may not have direct adaptive benefits. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  4. Heavy metals bioaccumulation by edible saprophytic mushrooms

    Directory of Open Access Journals (Sweden)

    Ivan ŠIRIĆ

    2016-09-01

    Full Text Available The aim of this study was to determine the concentration of heavy metals Fe, Zn, Cu, Ni, Pb i Cd in certain edible species of saprophytic fungi and the substrate on three area of sampling, and to assess the role of individual species as biological indicators of environmental pollution. In this study were used three species of wild edible mushrooms (Agaricus macroarpus Bohus, Clitocybe inversa (Scop. ex Fr. Pat. and Macrolepiota procera (Scop. ex Fr. Sing.,. Completely developed and mature fruiting bodies were collected at random selection in localities of Trakošćan, Jaska and Petrova gora. At the same time, the substrate soil samples were collected from the upper horizon (0-10. Determination of heavy metals in mushrooms and the substrate soil were carried out by X-ray Fluorescence Spectrometry. The data obtained were analysed by means of the statistical program SAS V9.2. Significant differences were found in the concentrations of Fe, Zn, Cu, Ni, Pb and Cd between analysed species of mushrooms and localities of sampling (P 1. The consumption of investigated mushrooms poses no toxicological risk to human health due to low concentrations analysed metals.

  5. Determination of selected heavy metals in inland fresh water of ...

    African Journals Online (AJOL)

    Agadaga

    significant negative impact on the water quality. Key words: Heavy ... fish, and for such in-stream uses as recreation, ... adverse effects of pollutants such as heavy metals is ... through Kebbi State and flows through to the Atlantic Ocean. The.

  6. Heavy metals in equine biological components

    OpenAIRE

    Maria Verônica de Souza; Maurício Paulo Ferreira Fontes; Raphael Bragança Alves Fernandes

    2014-01-01

    The objective of this research was to determine the concentration of heavy metals in the blood (Pb, Ni and Cd), serum (Cu and Zn) and hair (Pb, Ni, Cd, Cu and Zn) of horses raised in non-industrial and industrial areas (with steel mill), and to verify the possibility to use these data as indicators of environmental pollution. The samples were collected during summer and winter, aiming to verify animal contamination related to environment and season of the year. Copper and Zn contents determin...

  7. Determination of heavy metals in fish scales

    Directory of Open Access Journals (Sweden)

    Hana Nováková

    2010-12-01

    Full Text Available The outcomes from measurements of amount of selected elements in the fish scales of common carp are presented. Concentrations in the scales were identified and differences between storage of heavy metals in exposed and covered part of scale were studied. The spatial distribution of elements on the fish scale´s surface layer was measured by Laser Ablation–Inductively Coupled Plasma–Mass Spectrometry (LA–ICP–MS. The average amount of elements in the dissolved scales was quantified by ICP–MS. The fine structure of fish scales was visualized by phase–contrast Synchrotron radiation (SR microradiography.

  8. Atmospheric heavy metal deposition in the Copenhagen area

    DEFF Research Database (Denmark)

    Andersen, Allan; Hovmand, Mads Frederik; Johnsen, Ib

    1978-01-01

    Atmospheric dry and wet deposition (bulk precipitation) of the heavy metals Cu, Pb, Zn, Ni, V and Fe over the Copenhagen area was measured by sampling in plastic funnels from 17 stations during a twelve-month period. Epigeic bryophytes from 100 stations in the area were analysed for the heavy...... and heavy metal concentration in lichens and bryophytes. An exponential correlation was found between bulk precipitation and heavy metal concentration in soil. Regional variation of the heavy metal levels in the Copenhagen area was described and three sub-areas with high metal burdens were distinguished....... The heavy metal gradients from a secondary smelter in one of these sub-areas were steepest in soil compared with lichens and bryophytes....

  9. [Bioremediation of heavy metal pollution by edible fungi: a review].

    Science.gov (United States)

    Liu, Jian-Fei; Hu, Liu-Jie; Liao, Dun-Xiu; Su, Shi-Ming; Zhou, Zheng-Ke; Zhang, Sheng

    2011-02-01

    Bioremediation is the method of using organisms and their derivatives to absorb heavy metals from polluted environment, with the characteristics of low cost, broad sources, and no secondary pollution. Heavy metals enrichment by edible fungi is an important research focus of bioremediation, because it can decrease the eco-toxicity of heavy metals via the uptake by edible fungi, and thereby, take a definite role in heavy metal remediation. This paper reviewed the research progress on the enrichment of heavy metal copper, cadmium, lead, zinc, arsenic, and chromium by edible fungi and the possible enrichment mechanisms, and prospected the development and applications of heavy metal enrichment by edible fungi in the management of polluted environment.

  10. Perilous Effects of Heavy Metals Contamination on Human Health

    Directory of Open Access Journals (Sweden)

    Naseem Zahra

    2017-06-01

    Full Text Available Heavy metals form a versatile group of high density elements that vary considerably in their biological roles and chemical properties. Although many heavy metals are essential trace elements yet they have long been recognized as environmental pollutants due their toxic effects. Increased industrialization, urbanization anthropogenic activities like mining, smelting and other agricultural activities have resulted in accumulation of heavy metals in the environment. Heavy metals such as nickel, cadmium, zinc, copper, mercury, arsenic and chromium are not easily degradable and tend to build up in soil. These heavy metals through various routes such as fish and plants make their way into the human body and are known to have serious detrimental effects on human health at elevated levels. The harmful effects of some important heavy metals on human health have been discussed.

  11. Atmospheric heavy metal deposition in Europe estimated by moss analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ruehling, Aa. [Swedish Environmental Research Inst., Lund (Sweden). Dept. of Ecology

    1995-12-31

    Atmospheric heavy metal deposition in Europe including 21 countries was monitored in 1990-1992 by the moss technique. This technique is based on the fact that the concentrations of heavy metals in moss are closely correlated to atmospheric deposition. This was the first attempt to map heavy metal deposition in this large area. The objectives of the project were to characterise qualitatively and quantitatively the regional atmospheric deposition pattern of heavy metals in background areas in Europe, to indicate the location of important heavy metal pollution sources and to allow retrospective comparisons with similar studies. The present survey is a follow-up of a joint Danish and Swedish project in 1980 and an extended survey in 1985 within the framework of the Nordic Council of Ministers. In Sweden, heavy-metal deposition was first mapped on a nation-wide scale in 1968-1971 and 1975. (author)

  12. A Better Method for Evaluating Heavy Metal Water Pollution

    OpenAIRE

    Hering, Janet

    2002-01-01

    High concentrations of heavy metals, and even trace amounts of some, can be harmful to both plants and animals. The toxicity of heavy metal contamination, however, is highly dependent on the chemical form of the metal in question. Metals that are bound in particles or to organic (carbon-containing) compounds are less toxic than dissolved free ions, less toxic meaning that the metals are less readily available for uptake by marine organisms.

  13. Heavy metals occurrence in Italian food supplements

    Directory of Open Access Journals (Sweden)

    Brizio P.

    2013-04-01

    Full Text Available In recent years a significant increase in food supplements consumption has been observed, maybe in the belief that they couldn’t be dangerous for consumers health, even if they don’t achieved medical effects. However, environmental pollution can cause heavy metals contamination that could exceed maximum levels established by European legislation. Aim of this work was to evaluate arsenic, cadmium, chromium, lead and mercury content in 12 food supplements seized in a Piedmont shop by the Italian authority against food adulteration. All metals were analysed after mineralization and dilution steps by ICP-MS, with the exception of mercury, detected by the direct analyser TDA-AAS. Only one sample exceed the European maximum limits for lead (3,00 mg/kg but warning levels of chromium (over 3,00 mg/Kg has been detected in three of them.

  14. Combined strategy for the precipitation of heavy metals and biodegradation of petroleum in industrial wastewaters.

    Science.gov (United States)

    Pérez, R M; Cabrera, G; Gómez, J M; Abalos, A; Cantero, D

    2010-10-15

    The precipitation of chromium(III), copper(II), manganese(II) and zinc(II) by biogenic hydrogen sulfide generated by sulfate-reducing bacteria, Desulfovibrio sp., and the degradation of total petroleum hydrocarbons (TPH) in the presence of heavy metal by Pseudomonas aeruginosa AT18 have been carried out. An anaerobic stirred tank reactor was used to generate hydrogen sulfide with Desulfovibrio sp. culture and the precipitation of more than 95% of each metal was achieved in 24 h (metal solutions contained: 60, 49, 50 and 80 mg L(-1) of chromium, copper, manganese and zinc sulfates). A stirred tank reactor with P. aeruginosa AT18, in the presence of the heavy metal solution and 2% (v/v) of petroleum, led to the degradation of 60% of the total petroleum hydrocarbons and the removal of Cr(III) 99%, Cu(II) 93%, Zn(II) 46% and Mn(II) 88% in the medium through biosorption phenomena. These results enabled the development of an integrated system in which the two processes were combined. The overall aim of the study was achieved, with 84% of TPH degraded and all of the metals completely removed. Work is currently underway aimed at improving this system (decrease in operation time, culture of P. aeruginosa in anaerobic conditions) in an effort to apply this process in the bioremediation of natural media contaminated with heavy metals and petroleum.

  15. Removal of heavy metal ions from aqueous solutions using clinoptilolite

    OpenAIRE

    Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Krstev, Aleksandar

    2015-01-01

    Heavy metals are a common pollutant found in various industrial effluents. They are often encountered in mining operations and acid mine drainage. The heavy metals are highly toxic and are non-biodegradable, therefore they must be removed from the polluted streams in order to meet increasingly stringent environmental quality standards. Removal of heavy metals can be accomplished by a variety of techniques. Conventional methods typically involve the use of processes such as coag...

  16. Removal of heavy metal ions from aqueous solutions using clinoptilolite

    OpenAIRE

    Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Krstev, Aleksandar

    2015-01-01

    Heavy metals are a common pollutant found in various industrial effluents. They are often encountered in mining operations and acid mine drainage. The heavy metals are highly toxic and are non-biodegradable, therefore they must be removed from the polluted streams in order to meet increasingly stringent environmental quality standards. Removal of heavy metals can be accomplished by a variety of techniques. Conventional methods typically involve the use of processes such as coag...

  17. CONCENTRATION OF TOXIC INGREDIENTS (HAEVY METALS AND AROMATIC HYDROCARBONS IN ORGANS AND TISSUES OF HYDROBIONTS IN CENTRAL CASPIAN DISTRICT

    Directory of Open Access Journals (Sweden)

    S. A. Guseinova

    2013-01-01

    Full Text Available Abstract. Aim. Incorporation rate of heavy metals in fish is an important informative integrant index that allows estimating the impact of water pollution and fodder hydrobiont contamination on fish organisms. Unlike other contaminating anthropogenic factors of the Caspian Sea, metals are always present in the sea interacting with fish organisms many thousands times as the result of biological and chemical circuit.Methods. We analysed the grade of concentration of heavy metals in tissues and organs of hydrobionts under the program “the Central Caspian District of the Caspian Sea marine environment”. The procedure for determining metals consisted in determination of concentration of heavy metals in accordance with the methodology recommendations of atomic absorption analysis of Dagestan 52.24.28-86, with the help of atomic absorption spectrophotometer Hitachi 180-50.Results. The results after analysis of concentration of heavy metals in the tissues and organs of fish caught in the Central Caspian Sea marine environment are compared with the average annual estimation. The results obtained on the analysis of concentration of hydrocarbons in hydrobionts selected in the Central Caspian District of the Caspian Sea marine environment are within the long-term annual average data that are typical of the Northern and Middle Caspian Sea.Main conclusions. The results obtained help to form scientific foundation of ecological regulation that takes into account some ecosystems’ anthropogenic stability. Concentration of pollutants (heavy metals and hydrocarbons in hydrobiont tissues characterizes the ecological situation on the whole of the Caspian Sea due to hydrobionts’ large-scale migrations. The analysis of the dynamics of the pollutant concentration in tissues reflects the situation created in the drilling areas; it will help forecast and avert the negative impact of hydrocarbon production on the Caspian Sea ecosystem.

  18. Leaching of heavy metals from steelmaking slags

    Directory of Open Access Journals (Sweden)

    Gomes, J. F. P

    2006-12-01

    Full Text Available Leaching tests with EAF and Ladle slags were performed, using a flow through test and the standard batch test DIN 38414-S4. The previous method was used to simulate the leaching behaviour of steel slags under landfill. The chemical analysis of the leachates during this period shows, in general, for both types of slag, an increase of heavy metal releases with ageing. Standard test method DIN 38414-S4 was used to evaluate leachability of heavy metals by water in unprocessed slags. After more than one year of trials, slag samples submitted to these trials presented very low total leaching levels. The most extracted elements are calcium and magnesium. Nevertheless, in flow-through test, calcium and magnesium leached from solid slags are below 0.5% and all other metals below 0.1%. Leachates obtained with DIN 38414-S4 present, as expected, higher leaching values; however, these are inferior to 5 % (Ca and 1% (other elements.

    Este articulo contiene los resultados obtenidos en ensayos de lixiviación de escorias de acero (horno electrico y cuchara ejecutados siguiendo la metodologia de flujo dinámico así como el ensayo normalizado DIN 38414-S4. El primer ensayo intenta simular el comportamiento de lixiviación de las escorias en vertedero. Para las escorias ensayadas se han complementado los ensayos con el análisis químico de los lixiviados y se ha verificado un aumento de la liberación de metales pesados. El ensayo DIN 38414-S4 se ha utilizado para evaluar la lixiviación por agua de metales pesados, en muestras de escorias originales. Despues de un año de ensayos, se han observado niveles muy bajos de lixiviación. Los elementos mas lixiviados han sido calcio y magnesio. No obstante, en los ensayos de flujo dinámico, el calcio y el magnesio lixiviados de las escorias sólidas era menor de 0,5% y el resto de los otros metales era inferior a 0,1%. Los lixiviados obtenidos con el ensayo DIN 38414-S4 presentan, como era de esperar, valores

  19. Methanogenic degradation of petroleum hydrocarbons in subsurface environments remediation, heavy oil formation, and energy recovery.

    Science.gov (United States)

    Gray, N D; Sherry, A; Hubert, C; Dolfing, J; Head, I M

    2010-01-01

    Hydrocarbons are common constituents of surface, shallow, and deep-subsurface environments. Under anaerobic conditions, hydrocarbons can be degraded to methane by methanogenic microbial consortia. This degradation process is widespread in the geosphere. In comparison with other anaerobic processes, methanogenic hydrocarbon degradation is more sustainable over geological time scales because replenishment of an exogenous electron acceptor is not required. As a consequence, this process has been responsible for the formation of the world's vast deposits of heavy oil, which far exceed conventional oil assets such as those found in the Middle East. Methanogenic degradation is also a potentially important component of attenuation in hydrocarbon contamination plumes. Studies of the organisms, syntrophic partnerships, mechanisms, and geochemical signatures associated with methanogenic hydrocarbon degradation have identified common themes and diagnostic markers for this process in the subsurface. These studies have also identified the potential to engineer methanogenic processes to enhance the recovery of energy assets as biogenic methane from residual oils stranded in petroleum systems.

  20. Heavy metal screening in compounds feeds

    Directory of Open Access Journals (Sweden)

    Tomas Toth

    2015-05-01

    Full Text Available Heavy metals are generally classified as basic groups of pollutants that are now a days found in different environmental compartments. This is quite a large group of contaminants, which have different characteristics, effects on the environment and sources of origin. For environment pose the greatest risks, especially heavy metals produced by anthropogenic activities that adversely affect the health and vitality of organisms and natural environmental conditions. Livestock nutrition is among the main factors which affect not only the deficiency of livestock production and quality of food of animal origin, but they are also a factor affecting the safety and wholesomeness and the animal health. Compound feeds is characterized as a mixture of two or more feed grain. Containing organic, inorganic nutrients and specifically active compound feed meet the nutritional requirements of a given kind and age category of animals. They are used mainly in the diet of pigs, poultry, but also the nutrition of cattle, sheep, horses and other animal categories. The basic ingredients are cereals in proportion of 60-70 %. The aim of this thesis was to analyze the content of hazardous elements (copper, zinc, iron, manganese, cobalt, nickel, chromium, lead, cadmium, mercury in 15 samples of compound feeds and then evaluating their content in comparison with maximum limits laid down by Regulation of the Government of the Slovak Republic and Regulation Commission (EC.

  1. Effects of heavy metal adsorption on silicene

    KAUST Repository

    Kaloni, Thaneshwor P.

    2014-06-02

    Based on first-principles calculations, we study the effects of heavy metal atoms (Au, Hg, Tl, and Pb) adsorbed on silicene. We find that the hollow site is energetically favorable in each case. We particulary address the question how the adsorption modifies the band structure in the vicinity of the Fermi energy. Our results demonstrate that the heavy metal adatoms result in substantial energy gaps and band splittings in the silicene sheet as long as the binding is strong, which, however, is not always the case. (© 2014 WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim) Carbon nanotube flexible sponge was manufactured as high performance electromagnetic shielding material. Chemical vapour deposition (CVD) synthesized sponges with extreme light weight show an electromagnetic shielding above 20 dB and a specific electromagnetic shielding as high as 1100 dB cm3g-1 in the whole 1-18 GHz range. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Heavy metal atmospheric deposition and biomonitoring

    Science.gov (United States)

    Ayrault, S.; Clocchiatti, R.; Carrot, F.; Michel, A.; Gaudry, A.; Moskura, M.

    2003-05-01

    The atmospheric fluxes of heavy metals were measured continuously in the Paris area. The dry depositions were collected on quartz fiber filters, after comparison between clogging capacities and blank levels on commercial filters. Rain was collected in a polyethylene gauge. Two transplanted biomonitors, the epiphytic lichen Evernia prunastri, and the pleurocarpeous moss Scleropodium purum, were exposed simultaneously. These two common biomonitors have been used in previous passive biomonitoring campaigns [Galsomies 1999, Grasso 1999]. This work attempts to produce data on heavy metal exposure of this populated area near Paris, and to compare these two cryptogamic species behaviour. The results on bioaccumulation were compared to those given by a previous work in Italy [Bargagli, 2002] comparing the moss Hypnum cupressiforme and the lichen Parmelia caperata. In our study, the transplanted lichens were exposed in different conditions: to the rain or protected from rain, in vertical, horizontal or oblique position. Dry (filters) and wet (rain) depositions and biomonitors were analysed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Neutron Activation Analysis (NAA) for more than 30elements [Ayrault, 2001]. The individual particle composition (on filters and cryptogams) was determined by nuclear microprobe (PIXE) and electron microprobe. The lichens displayed different accumulation rates, depending on exposition conditions. In particular, the inclination influenced the bulk concentrations in the lichen. Relation was made between fluxes and concentration accumulated by the biomonitors. The enrichment factors were spectacular for some elements, e.g. lead.

  3. Bioremediation of Toxic Heavy Metals: A Patent Review.

    Science.gov (United States)

    Verma, Neelam; Sharma, Rajni

    2017-01-01

    The global industrialization is fulfilling the demands of modern population at the cost of environmental exposure to various contaminants including heavy metals. These heavy metals affect water and soil quality. Moreover, these enter into the food chain and exhibit their lethal effects on the human health even when present at slightly higher concentration than required for normal metabolism. To the worst of their part, the heavy metals may become carcinogenic. Henceforth, the efficient removal of heavy metals is the demand of sustainable development. Remedy: Bioremediation is the 'green' imperative technique for the heavy metal removal without creating secondary metabolites in the ecosystem. The metabolic potential of several bacterial, algal, fungal as well as plant species has the efficiency to exterminate the heavy metals from the contaminated sites. Different strategies like bioaccumulation, biosorption, biotransformation, rhizofilteration, bioextraction and volatilization are employed for removal of heavy metals by the biological species. Bioremediation approach is presenting a splendid alternate for conventional expensive and inefficient methods for the heavy metal removal. The patents granted on the bioremediation of toxic heavy metals are summarized in the present manuscript which supported the applicability of bioremediation technique at commercial scale. However, the implementation of the present information and advanced research are mandatory to further explore the concealed potential of biological species to resume the originality of the environment. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  4. Adsorption of heavy metal in freeway by asphalt block

    Science.gov (United States)

    Zheng, Chaocheng

    2017-08-01

    Heavy metals are toxic, persistent, and carcinogenic in freeway. Various techniques are available for the removal of heavy metals from waste water among soils during freeway including ion-exchange, membrane filtration, electrolysis, coagulation, flotation, and adsorption. Among them, bio-sorption processes are widely used for heavy metal and other pollutant removal due to its sustainable, rapid and economic. In this paper, heavy metal removal facilitated by adsorption in plants during freeway was illustrated to provide concise information on exploring the adsorption efficiency.

  5. Determination of heavy metal toxicity of finished leather solid waste.

    Science.gov (United States)

    Aslan, Ahmet

    2009-05-01

    This paper investigates the toxicity in leather products of heavy metals known to be detrimental to the ecosystem. Heavy metal concentrations in leather samples were identified with ICP-OES, and toxicity was determined using a MetPLATE bioassay. Chromium and aluminium were found to constitute 98% of the total concentration of heavy metals in finished leather tanned with chromium and aluminium salts, while in some vegetable-tanned leather, zirconium was the only heavy metal identified. The average inhibition values for chromium, aluminium and vegetable tanned leather were 98.08%, 97.04% and 62.36%, respectively.

  6. Research on Distribution Pattern of Heavy Metals in Yanzhou Coalfield

    Institute of Scientific and Technical Information of China (English)

    ZHOU Guang-zhu; YANG Feng-jie; CHENG Jian-guang; Wang Cui-zhen

    2005-01-01

    Heavy metal pollution brings extensive concerns since 1940s. In order to assess the heavy metal pollution on the farmland of Yanzhou coalfield, 216 soil samples and 54 combined samples were collected. Lead, cadmium, chromium, copper, zinc, and nickel contained in both topsoil and deep soil were analyzed using atomic absorbent spectrometry analyzer (AAS). Fuzzy clustering method was used in data processing. And fuzzy synthetic assessment was applied to assess the soil contamination by heavy metals. The result shows that Yanzhou coalfield has been polluted by the heavy metals to some extent.

  7. Heavy metal research in lacustrine sediment: a review

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Heavy metals are released into environment from a wide range of natural and anthropogenic sources. Aquatic ecosystems are normally at the receiving end and in many cases, with lakes as intermediaries.Lacustrine sediments are important sinks for heavy metals and play a significant role in enrichment and remobilization of heavy metals in aquatic systems. Therefore, characteristics of heavy metal in lacustrine sediments become one of the important issues in environmental sciences. Progress in heavy metal research of lake sediments since late 1980s is reviewed comprehensively in this paper from over 100. The Highlights are placed on the establishment of aquatic sediment quality guidelines, references chemical speciation of heavy metals, heavy metal transport mechanisms in lakes, and high-resolution study of lake borehole cores.Meanwhile, suggestions for heavy metal research in lacustrine sediment in the future are proposed, including such issues as using integrated approaches to assess aquatic ecosystem, modern lake dynamic process,high-resolution evolutionary sequence and spatial differentiation of environments and international lake database, which should be referential to the promotion of research on heavy metal in aquatic system.

  8. Peltier effect in normal metal-insulator-heavy fermion metal junctions

    Science.gov (United States)

    Goltsev, A. V.; Rowe, D. M.; Kuznetsov, V. L.; Kuznetsova, L. A.; Min, Gao

    2003-04-01

    A theoretical study has been undertaken of the Peltier effect in normal metal-insulator-heavy fermion metal junctions. The results indicate that, at temperatures below the Kondo temperature, such junctions can be used as electronic microrefrigerators to cool the normal metal electrode and are several times more efficient in cooling than the normal metal-heavy fermion metal junctions.

  9. Localization of polycyclic aromatic hydrocarbons and heavy metals in surface soil of Asia’s oldest oil and gas drilling site in Assam, north-east India: Implications for the bio-economy

    Directory of Open Access Journals (Sweden)

    Hemen Sarma

    2016-09-01

    Full Text Available The environmental influx of hazardous contaminants viz PAHs and HMs occurs due to oil and gas drilling, and processing of petroleum products in industrial facilities and refineries. This problem plagues crude oil drilling sites as PAHs are an essential component of and HMs coexist with crude oil. We analyzed the spatial distribution of 16 PAHs and 8 HMs in 10 contaminated sites of Assam, a state in India. These included Digboi, where crude oil was drilled in 1867 and the first oil well in Asia that was drilled. The Ʃ16 PAHs in soil were detected with a minimum of 13.48 and a maximum of 86.3 mgkg−1 and Ʃ 8 heavy metal concentrations in the soil ranged between 69.51 and 336.06 mgkg−1. A negative correlation was detected between the relative concentrations of PAHs and HMs. The results confirmed that the non-biodegradable nature of HMs made them stay in the soil for longer periods of time. In our study, we found that the levels of lead, copper, nickel, and chromium (total in soil were 73.62, 11.86, 58.97 and 158.66 mgkg−1. The recovery percentage for PAHs and HMs were in the range of 67–97% and 90–95% respectively. Spatial distribution indices for Phenanthrene/Anthracene, Naphthalene/Acenapthhylene, Chyrsene/Benzo (g, h, i perylene and Fluranthene/Pyrene calculated for soil samples indicated that the spatial distribution of PAHs in soil is uneven which might be due to variations in contaminates disseminated in soil. Such regionalized concentration has serious implications on the bio-economy both in terms of health and economy, especially since the proximity of crude oil sites to paddy fields and/or tea plantations uniquely marks the landscape of upper Assam.

  10. Determination of Heavy Metals in Leaves of Mangifera Indica ...

    African Journals Online (AJOL)

    USER PC

    Anacardium Occidentale L. in Trikania Industrial Area, Kaduna-Nigeria. ... metals from soil, water or air and retain them ... Administration (OSHA), European Union .... Heavy Metals from Wastewater using ... Biotechnology 5 (12): 1167-1176. 2.

  11. [Biological activity of selenorganic compounds at heavy metal salts intoxication].

    Science.gov (United States)

    Rusetskaya, N Y; Borodulin, V B

    2015-01-01

    Possible mechanisms of the antitoxic action of organoselenium compounds in heavy metal poisoning have been considered. Heavy metal toxicity associated with intensification of free radical oxidation, suppression of the antioxidant system, damage to macromolecules, mitochondria and the genetic material can cause apoptotic cell death or the development of carcinogenesis. Organic selenium compounds are effective antioxidants during heavy metal poisoning; they exhibit higher bioavailability in mammals than inorganic ones and they are able to activate antioxidant defense, bind heavy metal ions and reactive oxygen species formed during metal-induced oxidative stress. One of promising organoselenium compounds is diacetophenonyl selenide (DAPS-25), which is characterized by antioxidant and antitoxic activity, under conditions including heavy metal intoxication.

  12. Heavy metal contamination in bats in Britain

    Energy Technology Data Exchange (ETDEWEB)

    Walker, L.A. [NERC Centre for Ecology and Hydrology, Monks Wood, Abbots Ripton, Huntingdon, Cambridgeshire PE28 2LS (United Kingdom); Simpson, V.R. [Wildlife Veterinary Investigation Centre, Jollys Bottom Farm, Chacewater, Truro, Cornwall TR4 8PB (United Kingdom); Rockett, L. [NERC Centre for Ecology and Hydrology, Monks Wood, Abbots Ripton, Huntingdon, Cambridgeshire PE28 2LS (United Kingdom); Wienburg, C.L. [NERC Centre for Ecology and Hydrology, Monks Wood, Abbots Ripton, Huntingdon, Cambridgeshire PE28 2LS (United Kingdom); Shore, R.F. [NERC Centre for Ecology and Hydrology, Monks Wood, Abbots Ripton, Huntingdon, Cambridgeshire PE28 2LS (United Kingdom)]. E-mail: rfs@ceh.ac.uk

    2007-07-15

    Toxic metals are bioaccumulated by insectivorous mammals but few studies (none from Britain) have quantified residues in bats. We measured renal mercury (Hg), lead (Pb) and cadmium (Cd) concentrations in bats from south-west England to determine how they varied with species, sex, age, and over time, and if they were likely to cause adverse effects. Residues were generally highest in whiskered bats (Myotis mystacinus). Compared with other species, pipistrelle (Pipistrellus spp) and Natterer's bats (Myotis nattereri) had significantly lower kidney Hg and Pb concentrations, respectively. Renal Hg increased over time in pipistrelles but the contributory sources are unknown. Kidney Pb did not decrease over time despite concurrent declines in atmospheric Pb. Overall, median renal metal concentrations were similar to those in bats from mainland Europe and 6- to 10-fold below those associated with clinical effect, although 5% of pipistrelles had kidney Pb residues diagnostic of acute lead poisoning. - Heavy metal contamination has been quantified in bats from Britain for the first time and indicates increased accumulation of Hg and no reduction in Pb.

  13. Heavy Metals Toxicity and the Environment

    Science.gov (United States)

    Tchounwou, Paul B; Yedjou, Clement G; Patlolla, Anita K; Sutton, Dwayne J

    2013-01-01

    Heavy metals are naturally occurring elements that have a high atomic weight and a density at least 5 times greater than that of water. Their multiple industrial, domestic, agricultural, medical and technological applications have led to their wide distribution in the environment; raising concerns over their potential effects on human health and the environment. Their toxicity depends on several factors including the dose, route of exposure, and chemical species, as well as the age, gender, genetics, and nutritional status of exposed individuals. Because of their high degree of toxicity, arsenic, cadmium, chromium, lead, and mercury rank among the priority metals that are of public health significance. These metallic elements are considered systemic toxicants that are known to induce multiple organ damage, even at lower levels of exposure. They are also classified as human carcinogens (known or probable) according to the U.S. Environmental Protection Agency, and the International Agency for Research on Cancer. This review provides an analysis of their environmental occurrence, production and use, potential for human exposure, and molecular mechanisms of toxicity, genotoxicity, and carcinogenicity. PMID:22945569

  14. Propane decomposition and conversion into other hydrocarbons using metal target assisted laser induced plasma

    Science.gov (United States)

    Moosakhani, A.; Parvin, P.; Reyhani, A.; Mortazavi, S. Z.

    2017-01-01

    It is shown that the propane molecules are strongly decomposed in the metal assisted laser induced plasma based on the nano-catalytic adsorption. A Q-Switched Nd:YAG laser is employed to irradiate the propane gas filled in the control chamber in the presence of the reactive metals such as Ni, Fe, Pd, and Cu in order to study the effect of catalysts during the decomposition. The catalytic targets simultaneously facilitate the plasma formation and the decomposition events leading to generate a wide distribution of the light and heavy hydrocarbon molecules, mainly due to the recombination processes. Fourier transform infrared spectroscopy and gas chromatography instruments support the findings by detecting the synthetic components. Furthermore, the optical emission spectroscopy of the laser induced plasma emissions realizes the real time monitoring of the reactions taking place during each laser shot. The subsequent recombination events give rise to the generation of a variety of the hydrocarbon molecules. The dissociation rate, conversion ratio, selectivity, and yield as well as the performance factor arise mainly from the catalytic effects of the metal species. Moreover, the ablation rate of the targets of interest is taken into account as a measure of the catalytic reactivity due to the abundance of the metal species ablated from the target. This leads to assess the better performance factor for Pd among four metal catalysts of interest during propane decomposition. Finally, the molecules such as ethane and ethylene are identified as the stable abundant species created during the successive molecular recombination processes.

  15. Heavy Metals Resisting Gravity in White Dwarfs?

    Science.gov (United States)

    Rauch, T.; Gamrath, S.; Quinet, P.; Hoyer, D.; Werner, K.; Kruk, J. W.

    2017-03-01

    Spectral lines of heavy metals, identified in high-resolution ultraviolet spectra of the DO-type white dwarf RX J0503.9–2854 (RE 0503–289), allow precise abundance determinations of these species by means of advanced non-local thermodynamic equilibrium stellar-atmosphere models – provided that reliable atomic data is available. Such analyses of Zn (atomic number Z = 30), Ga (31), Ge (32), As (33), Mo (42), Kr (36), Zr (40), Xe (54), and Ba (56) have recently shown that, without exception, their abundances are unexpectedly strongly supersolar (up to about 5 dex). This is much higher than predicted by recent asymptotic giant branch nucleosynthesis calculations. Thus, the interplay of gravitational settling and radiative levitation may play an important role for their photospheric prominence.

  16. Heavy metals biogeochemistry in abandoned mining areas

    Directory of Open Access Journals (Sweden)

    Favas P. J. C.

    2013-04-01

    Full Text Available Plants growing on the abandoned Portuguese mines, highly contaminated with W, Sn, As, Cd, Cu, Zn and Pb, have been studied for their biogeochemical indication/prospecting and mine restoration potential. The results of analysis show that the species best suited for biogeochemical indicating are: aerial tissues of Halimium umbellatum (L. Spach, for As and W; leaves of Erica arborea L. for Bi, Sn, W and mostly Pb; stems of Erica arborea L. for Pb; needles of Pinus pinaster Aiton and aerial tissues of Pteridium aquilinum (L. Kuhn for W; and leaves of Quercus faginea Lam. for Sn. The aquatic plant studied (Ranunculus peltatus Schrank can be used to decrease the heavy metals, and arsenic amounts into the aquatic environment affected by acid mine drainages.

  17. Hydroponic phytoremediation of heavy metals and radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Hartong, J.; Szpak, J.; Hamric, T.; Cutright, T.

    1998-07-01

    It is estimated that the Departments of Defense, Energy, and Agriculture will spend up to 300 billion federal dollars on environmental remediation during the next century. Current remediation processes can be expensive, non-aesthetic, and non-versatile. Therefore, the need exists for more innovative and cost effective solutions. Phytoremediation, the use of vegetation for the remediation of contaminated sediments, soils, and ground water, is an emerging technology for treating several categories of persistent, toxic contaminants. Although effective, phytoremediation is still in a developmental stage, and therefore is not a widely accepted technology by regulatory agencies and public groups. Research is currently being conducted to validate the processes effectiveness as well as increase regulatory and community acceptance. This research will focus on the ability of plants to treat an aquifer contaminated with heavy metals and radionuclides. Specifically, the effectiveness of hydroponically grown dwarf sunflowers and mustard seed will be investigated.

  18. Heavy Metals Accumulation Characteristics of Vegetables in Hangzhou City, China

    Directory of Open Access Journals (Sweden)

    GU Yan-qing

    2015-08-01

    Full Text Available A field survey of heavy metal concentrations in soils and vegetables grown in 30 vegetable farmlands of Hangzhou City were carried out. Through calculating the bioconcentration factor(BCFand transfer factor(TFfor different heavy metals(Cu, Zn, Cd, Cr and Pbin 27 kinds of different vegetables which belong to leafy vegetables, root vegetables or eggplant fruit vegetables, assessing their accumulation characteristics of heavy metals according to the differences of the bio-concentration factor, the reasonable proposals were put forward to optimize the planting structure of vegetables in mild and middle-level heavy metal contamination soils. The experimental results were as follows: In soils with mild and middle-level heavy metal contamination, leafy vegetables, such as crown daisy, cabbage, celery and Chinese long cabbage, had relatively low enrichment ability of heavy metals, so as the root and fruit vegetables like white radish, carrot, tomatoes, hence these vegetables could be planted preferentially. In contrast, some kinds of vegetables, including white amaranth, red amaranth, tatsoi, broccoli, gynura, brassica juncea and lettuce of leafy vegetables, lactuca sativa, taro, red radish and cherry radish of rhizome vegetables and sweet pepper of fruit vegetables, had relatively high accumulation ability of heavy metal, which should be avoided to be planted in soils with mild and middle-level heavy metal contamination.

  19. THE HEAVY METALS CONNTENT IN VEGETABLES FROM MIDDLE SPIŠ AREA

    Directory of Open Access Journals (Sweden)

    Marek Slávik,Tomáš Tóth

    2014-02-01

    Full Text Available In the middle area of Spiš, it is significantly burden by heavy metals what is documented by radical content of Hg in soil from Rudňany 58.583645 mg.kg -1. On the content of heavy metals in vegetables grown in this soil it has the same effect. 61.5% samples exceeded the limit value of heavy metals. The most dangerous vegetables were Lactuca sativa L. The limit value was exceed in all determine heavy metals - Hg, Cd, Pb and Cu in this vegetables. In the case of Hg, the limit value exceed 93.86 times. For relatively safety is growing of Pisum sativum L., where there was no exceed any limits values. The root vegetables are dangerous, where the sample of Raphanus sativus L. exceed 6.71978 times the limit values for Pb although the content of lead in the soil was under hygienic limits. Transfer of heavy metals into consume parts of vegetables was no limited by high content of humus into soil. Transfer of heavy metals into consume parts of vegetables was no limited by weakly alkaline soil reaction. These factors are considered for factors limited mobility and input heavy metals into plants. We determined heavy metals by AAS method on a Varian 240 FS and method AMA 254.

  20. Bioremediation of heavy metals using biostimulation in laboratory bioreactor.

    Science.gov (United States)

    Fulekar, M H; Sharma, Jaya; Tendulkar, Akalpita

    2012-12-01

    The present research study investigates bioremediation potential of biostimulated microbial culture isolated from heavy metals waste disposal contaminated site located at Bhayander (east), Mumbai, India. The physicochemical and microbial characterization including heavy metal contaminants have been studied at waste disposal site. The microorganisms adapted at heavy metal-contaminated environment were isolated, cultured, and biostimulated in minimal salt medium under aerobic conditions in a designed and developed laboratory bioreactor. Heavy metals such as Fe, Cu, and Cd at a selected concentration of 25, 50, and 100 μg/ml were taken in bioreactor wherein biostimulated microbial culture was added for bioremediation of heavy metals under aerobic conditions. The remediation of heavy metals was studied at an interval of 24 h for a period of 21 days. The biostimulated microbial consortium has been found effective for remediation of Cd, Cu, and Fe at higher concentration, i.e., 100 mg/l up to 98.5%, 99.6%, and 100%, respectively. Fe being a micronutrient was remediated completely compared to Cu and Cd. During the bioaccumulation of heavy metals by microorganisms, environmental parameters such as pH, total alkalinity, electronic conductivity, biological oxygen demand, chemical oxygen demand, etc. were monitored and assessed. The pilot scale study would be applicable to remediate heavy metals from waste disposal contaminated site to clean up the environment.

  1. Safety Evaluation of Osun River Water Containing Heavy Metals and ...

    African Journals Online (AJOL)

    olayemitoyin

    Safety Evaluation of Osun River Water Containing Heavy. Metals and ... evaluated its safety in rats. Heavy metals .... levels of liver GSH and activities of AST and ALT in. Table 1: pH .... been observed previously in rats treated with aflatoxin.

  2. Heavy Metal Music and Adolescent Suicidality: An Empirical Investigation.

    Science.gov (United States)

    Scheel, Karen R.; Westefeld, John S.

    1999-01-01

    Investigates the relationship between preference for heavy metal music and vulnerability to suicide among high school students. Results indicate that preference for heavy metal music among adolescents may be sign of increased suicidal vulnerability, but also suggests that the source of the problem may lie more in personal and familial…

  3. Heavy Metal Music and Reckless Behavior among Adolescents.

    Science.gov (United States)

    Arnett, Jeffrey

    1991-01-01

    Fifty-four male and 30 female adolescents who like heavy metal music were compared on various outcome variables to 56 male and 105 female peers who do not like it. Those who like heavy metal report a wider range of reckless behavior than those who do not like it. (SLD)

  4. A Process for Making Bulk Heavy Metal Fluoride Glasses.

    Science.gov (United States)

    This invention relates to the preparation of glasses, and, in particular, relates to the preparation of heavy metal fluoride glasses with...reproducible high optical qualities. Considerable effort has been expended to develop heavy metal fluoride glasses ( HMFG ) as a viable family of infrared

  5. Heavy Metal Toxicity in Bioremediation: Microbial Cultures and Microscopy.

    Science.gov (United States)

    1997-12-01

    This research employed a variety of microscopy and spread plating techniques to observe the effects of heavy metal treatments on a toluene-selected...of bacteria and offered new techniques for potential heavy metal toxicity measurements as well as differentiation methods.

  6. Determination of heavy metals in chinese prickly ash from different ...

    African Journals Online (AJOL)

    digestion, and the contents of copper (Cu), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), arsenic ... In addition, toxic heavy metals in plants could be influenced ... deformities, could be caused by heavy metal poisoning, including Pb, Cd, As, Hg, Sn, and Sb poisoning [4,5]. ..... body harm and prevention. Qinghai ...

  7. Heavy Metal Biosorption Sites Studies of Laminaria japonica

    Institute of Scientific and Technical Information of China (English)

    QIAN Aihong; WANG Xian; DENG Yongzhi; CHEN Lidan

    2005-01-01

    The role played by the functional groups of Laminaria japonica treated by methanol and formaldehyde in biosorption of the heavy metals was investigated.Infrared spectroscopy analysis and biosorption experiments show that both carboxyl and amino groups join in the sorption; chemical treatment decreased the biosorption efficiency of the heavy metals.

  8. Removal of Heavy Metals in Effluent by Adsorption and Coagulation

    Institute of Scientific and Technical Information of China (English)

    Feng Ting LI; Xia LI; Bing Ru ZHANG; Qing Hua OUYANG

    2004-01-01

    The silicate colloids with an average diameter 100 nm, were prepared by the hydrolysis of tetraethoxysilane (TES), NH4OH (30%) and then modified by (3-mercaptopropyl) trimethoxysilane ( APS). The colloids can adsorb heavy metals such as Pb and Cr in effluent and after adsorption the colloids can be separated by coagulation of aluminum sulfate. The removal of heavy metals is up to 99%.

  9. Human health risk assessment of heavy metals in urban stormwater.

    Science.gov (United States)

    Ma, Yukun; Egodawatta, Prasanna; McGree, James; Liu, An; Goonetilleke, Ashantha

    2016-07-01

    Toxic chemical pollutants such as heavy metals (HMs) are commonly present in urban stormwater. These pollutants can pose a significant risk to human health and hence a significant barrier for urban stormwater reuse. The primary aim of this study was to develop an approach for quantitatively assessing the risk to human health due to the presence of HMs in stormwater. This approach will lead to informed decision making in relation to risk management of urban stormwater reuse, enabling efficient implementation of appropriate treatment strategies. In this study, risks to human health from heavy metals were assessed as hazard index (HI) and quantified as a function of traffic and land use related parameters. Traffic and land use are the primary factors influencing heavy metal loads in the urban environment. The risks posed by heavy metals associated with total solids and fine solids (heavy metal does not pose a significant risk, the presence of multiple heavy metals could be detrimental to human health. These findings suggest that stormwater guidelines should consider the combined risk from multiple heavy metals rather than the threshold concentration of an individual species. Furthermore, it was found that risk to human health from heavy metals in stormwater is significantly influenced by traffic volume and the risk associated with stormwater from industrial areas is generally higher than that from commercial and residential areas.

  10. Balance of heavy metals in the Volga River delta

    Science.gov (United States)

    Kur'yakova, A. N.

    2011-08-01

    The results of many years of geochemical research of aquatic landscapes are presented. Data on the average annual and seasonal concentrations of heavy metals in water and suspended sediments are given. Factors of migration and accumulation of elements in aquatic landscapes are discussed. Masses of heavy metals annually incoming and accumulated in the Volga River delta were calculated.

  11. Effect of heavy metals on, and handling by, the kidney.

    Science.gov (United States)

    Barbier, Olivier; Jacquillet, Grégory; Tauc, Michel; Cougnon, Marc; Poujeol, Philippe

    2005-01-01

    Heavy metals such as cadmium (Cd), mercury (Hg), lead (Pb), chromium (Cr) and platinum (Pt) are a major environmental and occupational hazard. Unfortunately, these non-essential elements are toxic at very low doses and non-biodegradable with a very long biological half-life. Thus, exposure to heavy metals is potentially harmful. Because of its ability to reabsorb and accumulate divalent metals, the kidney is the first target organ of heavy metal toxicity. The extent of renal damage by heavy metals depends on the nature, the dose, route and duration of exposure. Both acute and chronic intoxication have been demonstrated to cause nephropathies, with various levels of severity ranging from tubular dysfunctions like acquired Fanconi syndrome to severe renal failure leading occasionally to death. Very varied pathways are involved in uptake of heavy metals by the epithelium, depending on the form (free or bound) of the metal and the segment of the nephron where reabsorption occurs (proximal tubule, loop of Henle, distal tubule and terminal segments). In this review, we address the putative uptake pathways involved along the nephron, the mechanisms of intracellular sequestration and detoxification and the nephropathies caused by heavy metals. We also tackle the question of the possible therapeutic means of decreasing the toxic effect of heavy metals by increasing their urinary excretion without affecting the renal uptake of essential trace elements. We have chosen to focus mainly on Cd, Hg and Pb and on in vivo studies.

  12. Bioindication of a surplus of heavy metals in terrestrial ecosystems.

    Science.gov (United States)

    Ernst, W H; Verkleij, J A; Vooijs, R

    1983-09-01

    A survey of the methods of boindication of heavy metals in terrestrial ecosystems and their effectiveness for predicting the consequences of environmental stress on organisms is presented. Two main inputs of heavy metals for terrestrial ecosystems have been considered: airborne and soil-borne.Airborne metals can be monitored due to physical adsorption on plant surfaces or due to chemical exchange processes in cell walls. Active biomonitoring widely uses both aspects, however, without predictive values.Meaningful bioindication of soilborne heavy metals can only be achieved by passive monitoring. Due to the different functions of heavy metals in organisms-micronutrients and trace elements-the knowledge of natural background values is important, considering the qualitative aspects of metals in the soil. In exceptional situations morphological and anatomical changes of plant organs will facilitate bioindication; in every case chemical analysis of the concentration of heavy metals is an essential part of the monitoring program.A long-term exposure of organisms to heavy metals will influence the genetic structure of populations. Therefore measurement of heavy metal tolerance of plants has to be a standard procedure in monitoring programs.

  13. Reducing hazardous heavy metal ions using mangium bark waste.

    Science.gov (United States)

    Khabibi, Jauhar; Syafii, Wasrin; Sari, Rita Kartika

    2016-08-01

    The objective of this study was to evaluate the characteristics of mangium bark and its biosorbent ability to reduce heavy metal ions in standard solutions and wastewater and to assess changes in bark characteristics after heavy metal absorption. The experiments were conducted to determine heavy metal absorption from solutions of heavy metals alone and in mixtures as well as from wastewater. The results show that mangium bark can absorb heavy metals. Absorption percentages and capacities from single heavy metal solutions showed that Cu(2+) > Ni(2+) > Pb(2+) > Hg(2+), while those from mixture solutions showed that Hg(2+) > Cu(2+) > Pb(2+) > Ni(2+). Wastewater from gold mining only contained Cu, with an absorption percentage and capacity of 42.87 % and 0.75 mg/g, respectively. The highest absorption percentage and capacity of 92.77 % and 5.18 mg/g, respectively, were found for Hg(2+) in a mixture solution and Cu(2+) in single-metal solution. The Cu(2+) absorption process in a single-metal solution changed the biosorbent characteristics of the mangium bark, yielding a decreased crystalline fraction; changed transmittance on hydroxyl, carboxyl, and carbonyl groups; and increased the presence of Cu. In conclusion, mangium bark biosorbent can reduce hazardous heavy metal ions in both standard solutions and wastewater.

  14. Influence of heavy metal pollution on lichens and bryophytes

    Energy Technology Data Exchange (ETDEWEB)

    Rao, D.N.; Robitaille, G.; LeBlanc, F.

    1977-05-01

    A close correlation was observed between metal accumulation levels and phytosociological and physiological changes produced in lichens and bryophytes in a sulfur dioxide and heavy metal polluted area around a copper smelter in Murdochville, Canada. This observation has prompted a discussion of some of the past and present research on ecology, phytosociology, and physiology of lichens and bryophytes with respect to heavy metal pollution. Hopefully this will lead to a better understanding of the use of these plants in the diagnosis of heavy metal pollution. Data are received on the accumulation of Ba, Cu, Pb, Sr and Zn in certain mosses and their corresponding substrates.

  15. Modeling of Heavy Metal Transformation in Soil Ecosystem

    Science.gov (United States)

    Kalinichenko, Kira; Nikovskaya, Galina N.

    2017-04-01

    The intensification of industrial activity leads to an increase in heavy metals pollution of soils. In our opinion, sludge from biological treatment of municipal waste water, stabilized under aerobic-anaerobic conditions (commonly known as biosolid), may be considered as concentrate of natural soil. In their chemical, physical and chemical and biological properties these systems are similar gel-like nanocomposites. These contain microorganisms, humic substances, clay, clusters of nanoparticles of heavy metal compounds, and so on involved into heteropolysaccharides matrix. It is known that microorganisms play an important role in the transformation of different nature substances in soil and its health maintenance. The regularities of transformation of heavy metal compounds in soil ecosystem were studied at the model of biosolid. At biosolid swelling its structure changing (gel-sol transition, weakening of coagulation contacts between metal containing nanoparticles, microbial cells and metabolites, loosening and even destroying of the nanocomposite structure) can occur [1, 2]. The promotion of the sludge heterotrophic microbial activities leads to solubilization of heavy metal compounds in the system. The microbiological process can be realized in alcaligeneous or acidogeneous regimes in dependence on the type of carbon source and followed by the synthesis of metabolites with the properties of flocculants and heavy metals extragents [3]. In this case the heavy metals solubilization (bioleaching) in the form of nanoparticles of hydroxycarbonate complexes or water soluble complexes with oxycarbonic acids is observed. Under the action of biosolid microorganisms the heavy metals-oxycarbonic acids complexes can be transformed (catabolised) into nano-sizing heavy metals- hydroxycarbonates complexes. These ecologically friendly complexes and microbial heteropolysaccharides are able to interact with soil colloids, stay in the top soil profile, and improve soil structure due

  16. Biomedical Implications of Heavy Metals Induced Imbalances in Redox Systems

    Science.gov (United States)

    Singh, Shweta; Siddiqi, Nikhat J.

    2014-01-01

    Several workers have extensively worked out the metal induced toxicity and have reported the toxic and carcinogenic effects of metals in human and animals. It is well known that these metals play a crucial role in facilitating normal biological functions of cells as well. One of the major mechanisms associated with heavy metal toxicity has been attributed to generation of reactive oxygen and nitrogen species, which develops imbalance between the prooxidant elements and the antioxidants (reducing elements) in the body. In this process, a shift to the former is termed as oxidative stress. The oxidative stress mediated toxicity of heavy metals involves damage primarily to liver (hepatotoxicity), central nervous system (neurotoxicity), DNA (genotoxicity), and kidney (nephrotoxicity) in animals and humans. Heavy metals are reported to impact signaling cascade and associated factors leading to apoptosis. The present review illustrates an account of the current knowledge about the effects of heavy metals (mainly arsenic, lead, mercury, and cadmium) induced oxidative stress as well as the possible remedies of metal(s) toxicity through natural/synthetic antioxidants, which may render their effects by reducing the concentration of toxic metal(s). This paper primarily concerns the clinicopathological and biomedical implications of heavy metals induced oxidative stress and their toxicity management in mammals. PMID:25184144

  17. Heavy metal adsorption of Streptomyces chromofuscus K101

    Institute of Scientific and Technical Information of China (English)

    Said Mohamed Daboor; Amany Mohamed Haroon; Neven Abd Elfatah Esmael; Slah Ibrahem Hanona

    2014-01-01

    Objective:To find the best actinomycete that has potential application value in the heavy metal remediation due to its special morphological and physiological metabolism. Methods: In some areas of River Nile, Egypt, a total of 67 actinomycete isolates (17 isolates from surface water and 50 from sediment) were identified. In addition, the studied area was characterized by a large amount of submerged macrophyte species Ceratophyllum demersum, one free floating species Eichhornia crassipes and two emergent species Polygonum tomentosum and Saccharum spontaneum with the highest biomass production values. Many methods are used in this research like qualitative evaluation of heavy metals, minimum inhibitory concentration of heavy metal determination, metal binding assay, heavy metal assessment, etc. Results: Many actinomycetes isolates were isolated from River Nile, Egypt, the absorbent efficiency of one isolate Streptomyces chromofuscusK101 showed the most efficient metal binding activity. The adsorption process of Zn2+, Pb2+and Fe2+single or mixture metal ions was investigated, where the order of adsorption potential ( Zn2+>Pb2+>Fe2+ ) was observed in single metal reaction. The adsorption in mixed metal reactions was the same order as in single-metal ion with a significant decrease in Fe2+and Pb2+adsorption. Conclusions: In conclusion the metal adsorption reactions were very fast, pH dependent and culture age-independent, suggestive of a physicochemical reaction between cell wall components and heavy metal ions. The absorbent removal efficiency was determined as a function of ion concentration, pH and temperature.

  18. Differential responses of sweetpotato peroxidases to heavy metals.

    Science.gov (United States)

    Kim, Yun-Hee; Lee, Haeng-Soon; Kwak, Sang-Soo

    2010-09-01

    Oxidative stress is one of the major causes of damage in plants exposed to different types of environmental stress, including heavy metals. Accumulation of heavy metals in plants can disrupt many cellular functions and plant growth. To assess the contribution of oxidative stress to heavy metal toxicity in plants, young sweetpotato plants (Ipomoea batatas) were treated with increasing concentrations of Cd, Cu and Zn, and grown in half Murashige and Skoog nutrient solution culture. Plant growth was significantly inhibited and internal metal content was increased in a dose-dependent manner for each metal. The generation of H(2)O(2) in leaves and fibrous roots correlated positively with metal dose. The specific activity of peroxidases (PODs) in fibrous roots was markedly enhanced by metal treatment, whereas in leaves, activity was low and only slightly affected by metal treatment. Analysis of 13 POD genes revealed differential expression of PODs in response to heavy metals. Several genes for acidic PODs (swpa2, swpa3 and swpa4) and basic PODs (swpb1, swpb3 and swpab4) were strongly expressed under all metal treatment conditions in leaves or fibrous roots. The expression of swpa1 was increased in leaves and fibrous roots by Cd and Cu treatment, whereas swpb5 expression was reduced by all metals in fibrous roots. These results indicate that increased H(2)O(2) levels in response to heavy metal stress are closely linked to an improved antioxidant defense capability mediated by POD.

  19. Cell surface engineering of microorganisms towards adsorption of heavy metals.

    Science.gov (United States)

    Li, Peng-Song; Tao, Hu-Chun

    2015-06-01

    Heavy metal contamination has become a worldwide environmental concern due to its toxicity, non-degradability and food-chain bioaccumulation. Conventional physical and chemical treatment methods for heavy metal removal have disadvantages such as cost-intensiveness, incomplete removal, secondary pollution and the lack of metal specificity. Microbial biomass-based biosorption is one of the approaches gaining increasing attention because it is effective, cheap, and environmental friendly and can work well at low concentrations. To enhance the adsorption properties of microbial cells to heavy metal ions, the cell surface display of various metal-binding proteins/peptides have been performed using a cell surface engineering approach. The surface engineering of Gram-negative bacteria, Gram-positive bacteria and yeast towards the adsorption of heavy metals are reviewed in this article. The problems and future perspectives of this technology are discussed.

  20. Effects of Heavy Metal Toxicity on Human Health

    Directory of Open Access Journals (Sweden)

    Guluzar Ozbolat

    2016-12-01

    Full Text Available Heavy metals are the elements that can be toxic even at low concentrations. It is often used as a group name for metals and semimetals (metalloids that have been associated with contamination and potential toxicity or ecotoxicity. Heavy metals are toxic to human health. Because it cannot be discarded with (kidney, liver intestine, skin, lung without special support from most of the body's normal excretion routes Therefore, a large part of the heavy metals accumulate in biological organisms. As a result of the accumulation of these metals that are focused within living things, when they have reached the effective dose severe diseases (such as autism neurological, thyroid and infertility even can cause death. In this review information about the properties and effects of some heavy metals that affects human health have been provided.. [Archives Medical Review Journal 2016; 25(4.000: 502-521

  1. Primary Analysis of Two Kinds of Heavy Metals and Petroleum Hydrocarbons Content in Benthos in Yacheng Oil Field%崖城气田底栖动物中2种重金属及石油烃残毒量初步分析

    Institute of Scientific and Technical Information of China (English)

    黄颖华; 张浩

    2011-01-01

    Based on the investigation data in 2009-2010 about the residual poison in the organism, the contents of contamination in benthos in Yacheng oil field were analyzed and assessed. The results showed that the change of contamination content in benthos was not obvious from 2009 to 2010 and the benthos were not severely polluted by heavy metal and petroleum hydrocarbons. The quality of the various species of benthos in this area was good and the impact of oil field on nearby waters was little.%根据2009年和2010年的调查资料,对崖城气田附近海域底栖动物污染物含量现状进行分析与评价.结果表明,2009年到2010年该气田附近生物体内污染物含量变化不明显,底柄动物未严重受到重金属和石油烃污染,该区域底柄动物各类群的生物质量状况良好,气田的开发活动对附近海区影响相对较小.

  2. Heavy metal pollution of ambient air in Nagpur City.

    Science.gov (United States)

    Chaudhari, Pramod R; Gupta, Rakhi; Gajghate, Daulat Ghilagi; Wate, Satish R

    2012-04-01

    Heavy metals released from different sources in urban environment get adsorbed on respirable particulate matter less than 10 μm in size (PM(10)) and are important from public health point of view causing morbidity and mortality. Therefore, the ambient air quality monitoring was carried out to study the temporal and special pattern in the distribution of PM(10) and associated heavy metal content in the atmosphere of Nagpur, Maharashtra State, India during 2001 as well as in 2006. PM(10) fraction was observed to exceed the stipulated standards in both years. It was also observed that minimum range of PM(10) was observed to be increased in 2006 indicating increase in human activity during nighttime also. Six heavy metals were analyzed and were observed to occur in the order Zn > Fe > Pb > Ni > Cd > Cr in 2006, similar to the trend in other metro cities in India. Lead and Nickel were observed to be within the stipulated standards. Poor correlation coefficient (R(2)) between lead and PM(10) indicated that automobile exhaust is not the source of metals to air pollution. Commercial and industrial activity as well as geological composition may be the potential sources of heavy metal pollution. Total load of heavy metals was found to be increased in 2006 with prominent increase in zinc, lead, and nickel in the environment. Public health impacts of heavy metals as well as certain preventive measures to mitigate the impact of heavy metals on public health are also summarized.

  3. Impact of heavy metals on the female reproductive system

    Directory of Open Access Journals (Sweden)

    Piotr Rzymski

    2015-05-01

    Full Text Available Introduction. It has been recognized that environmental pollution can affect the quality of health of the human population. Heavy metals are among the group of highly emitted contaminants and their adverse effect of living organisms has been widely studied in recent decades. Lifestyle and quality of the ambient environment are among these factors which can mainly contribute to the heavy metals exposure in humans. Objective. A review of literature linking heavy metals and the female reproductive system and description of the possible associations with emission and exposure of heavy metals and impairments of female reproductive system according to current knowledge. Results. The potential health disorders caused by chronic or acute heavy metals toxicity include immunodeficiency, osteoporosis, neurodegeneration and organ failures. Potential linkages of heavy metals concentration found in different human organs and blood with oestrogen-dependent diseases such as breast cancer, endometrial cancer, endometriosis and spontaneous abortions, as well as pre-term deliveries, stillbirths and hypotrophy, have also been reported. Conclusions. Environmental deterioration can lead to the elevated risk of human exposure to heavy metals, and consequently, health implications including disturbances in reproduction. It is therefore important to continue the investigations on metal-induced mechanisms of fertility impairment on the genetic, epigenetic and biochemical level.

  4. Biosorption of heavy metals by a marine bacterium

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, Anita [Central Salt and Marine Chemicals Research Institute, Bhavnagar 364002, Gujarat (India); Mody, Kalpana [Central Salt and Marine Chemicals Research Institute, Bhavnagar 364002, Gujarat (India)]. E-mail: khmody@csmcri.org; Jha, Bhavanath [Central Salt and Marine Chemicals Research Institute, Bhavnagar 364002, Gujarat (India)

    2005-03-01

    Heavy metal chelation property of exopolysaccharide produced by Enterobacter cloaceae, a marine bacterium, isolated from the West Coast of India, is reported in this paper. The exopolysaccharide demonstrated excellent chelating properties with respect to cadmium (65%) followed by copper (20%) and cobalt (8%) at 100 mg/l heavy metal concentration. However, it could not chelate mercury. A comparative study of the percentage biosorption of the above mentioned metals is presented here.

  5. Phytoremediation: structural characteristics of plants under heavy metal effect

    OpenAIRE

    Otradovcová, Marie

    2010-01-01

    The environmental pollution by heavy metals has been becoming currently a big problem. The contents of these metals in soils and water increase, particular in consequence of human activities particularly in developed countries. Local contaminations are problematic in our country, too. Soil contamination by heavy metals negatively affects agricultural production and food chains in nature. It may have an adverse impact to human health. The general public is interested in possibilities of removi...

  6. Heavy Metal Contamination of Popular Nail Polishes in Iran

    OpenAIRE

    Golnaz Karimi; Parisa Ziarati

    2015-01-01

    Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of d...

  7. Heavy metal displacement in chelate-irrigated soil during phytoremediation

    Science.gov (United States)

    Madrid, F.; Liphadzi, M. S.; Kirkham, M. B.

    2003-03-01

    Heavy metals in wastewater sewage sludge (biosolids), applied to land, contaminate soils. Phytoremediation, the use of plants to clean up toxic heavy metals, might remove them. Chelating agents are added to soil to solubilize the metals for enhanced phytoextraction. Yet no studies follow the displacement and leaching of heavy metals in soil with and without roots following solubilization with chelates. The objective of this work was to determine the mobility of heavy metals in biosolids applied to the surface of soil columns (76 cm long; 17 cm diam.) with or without plants (barley; Hordeum vulgare L.). Three weeks after barley was planted, all columns were irrigated with the disodium salt of the chelating agent, EDTA (ethylenediamine tetraacetic acid) (0.5 g/kg soil). Drainage water, soil, and plants were analyzed for heavy metals (Cd, Cu, Fe, Mn, Ni, Pb, Zn). Total concentrations of the heavy metals in all columns at the end of the experiment generally were lower in the top 30 cm of soil with EDTA than without EDTA. The chelate increased concentrations of heavy metals in shoots. With or without plants, the EDTA mobilized Cd, Fe, Mn, Ni, Pb, and Zn, which leached to drainage water. Drainage water from columns without EDTA had concentrations of these heavy metals below detection limits. Only Cu did not leach in the presence of EDTA. Even though roots retarded the movement of Cd, Fe, Mn, Ni, Pb, and Zn through the EDTA-treated soil from 1 d (Cd) to 5 d (Fe), the drainage water from columns with EDTA had concentrations of Cd, Fe, Mn, and Pb that exceeded drinking water standards by 1.3, 500, 620, and 8.6 times, respectively. Because the chelate rendered Cd, Fe, Mn, Ni, Pb, and Zn mobile, it is suggested that the theory for leaching of soluble salts, put forward by Nielsen and associates in 1965, could be applied to control movement of the heavy metals for maximum uptake during chelate-assisted phytoremediation.

  8. Plants Role in Reducing Heavy Metals from Polluted Soil Leachate

    Directory of Open Access Journals (Sweden)

    Amouei A.* PhD,

    2015-09-01

    Full Text Available Aims In the past few decades, more attention has been paid to clean up soils polluted with heavy metals by plants. A serious problem in this way is the amount of heavy metals uptake by plants. This study was conducted to evaluate the effectiveness of 3 local plants of Mazandaran province, Iran, in reducing and controlling the soil’s heavy metals. Instrument & Methods The removal amount of three heavy metals (lead, zinc and cadmium by native plants (maize, velvetleaf and wild amaranth was investigated in alkaline (pH=8 and acidic (pH=5 soils and also using three substances such as EDTA, ammonium citrate and phosphate. The concentrations of these metals in leachate were measured by using atomic absorption spectrometry method. Findings Lead, cadmium and zinc levels in leachate in treatments with plants were less than unplanted ones. The concentrations of these metals in the produced leachate of treatments with acidic soils were higher than those with alkaline soils. In the treatments of soil polluted with additives, treatments containing ammonium phosphate and EDTA had the lowest and highest concentrations of heavy metals, respectively. Concentrations of these metals in treatments without plants were higher than those with plants. Conclusion Increasing of soil pH is effective on stabilization of heavy metals in soil. Ammonium phosphate plays an important role in stabilizing and EDTA and ammonium citrate increase the mobility of lead, zinc and cadmium in soil and groundwater.

  9. Accumulation of heavy metals in selected medicinal plants.

    Science.gov (United States)

    Sarma, Hemen; Deka, Suresh; Deka, Hemen; Saikia, Rashmi Rekha

    2011-01-01

    In this review, we evaluate the reports published between 1993 and 2011 that address the heavy metal accumulation in 88 medicinal plant species. We compare the safe limits for heavy metals set by governmental agencies vs. the levels at which such metals actually exist in selected medicinal plants. We also evaluate the uses and effectiveness of medicinal plants in health care, and assess the hazards of medicinal plant uses, in view of the growing worldwide use of medicinal plants. From our extensive review of the literature, we discovered that a maximum permissible level (MPL) of Pb is exceeded in 21 plant medicine species, Cd in 44 species, and Hg in 10 species. Vetiveria zizanioides a potential candidate species for the treatment of cardiovascular diseases absorb a wide range of heavy metals from metal-contaminated soils. We believe that this species is the single most impressive example of a potentially hazardous medicinal plant. Based on our review, we endorse the hypothesis that heavy metal accumulation by medicinal plants is mainly caused by extraction of soluble metals from contaminated soil, sediments and air. One continuing problem in protecting consumers of plant-based medicines is that permissible levels of all heavy metals in herbal medicine have not yet been standardized by regulating governmental entities. Moreover, there are few limit tests that exist for heavy metal content of medicinal plants, or permissible limits for essential dietary minerals, in most medicinal plants. The dearth of such limits hamstrings development of medicinal plant research and delays the release of either new or improved versions of medicinal plants or their components. In the present review, we emphasize that medicinal plants are often subjected to heavy metal contamination and that the levels at which these heavy metals sometimes occur exceeds permissible levels for some species. Therefore, collecting medicinal plants from areas that are, or may be, contaminated should be

  10. Heavy metals in vegetables and potential risk for human health

    Directory of Open Access Journals (Sweden)

    Fernando Guerra

    2012-02-01

    Full Text Available Ingestion of vegetables containing heavy metals is one of the main ways in which these elements enter the human body. Once entered, heavy metals are deposited in bone and fat tissues, overlapping noble minerals. Slowly released into the body, heavy metals can cause an array of diseases. This study aimed to investigate the concentrations of cadmium, nickel, lead, cobalt and chromium in the most frequently consumed foodstuff in the São Paulo State, Brazil and to compare the heavy metal contents with the permissible limits established by the Brazilian legislation. A value of intake of heavy metals in human diets was also calculated to estimate the risk to human health. Vegetable samples were collected at the São Paulo General Warehousing and Centers Company, and the heavy metal content was determined by atomic absorption spectrophotometry. All sampled vegetables presented average concentrations of Cd and Ni lower than the permissible limits established by the Brazilian legislation. Pb and Cr exceeded the limits in 44 % of the analyzed samples. The Brazilian legislation does not establish a permissible limit for Co contents. Regarding the consumption habit of the population in the São Paulo State, the daily ingestion of heavy metals was below the oral dose of reference, therefore, consumption of these vegetables can be considered safe and without risk to human health.

  11. Microalgae - A promising tool for heavy metal remediation.

    Science.gov (United States)

    Suresh Kumar, K; Dahms, Hans-Uwe; Won, Eun-Ji; Lee, Jae-Seong; Shin, Kyung-Hoon

    2015-03-01

    Biotechnology of microalgae has gained popularity due to the growing need for novel environmental technologies and the development of innovative mass-production. Inexpensive growth requirements (solar light and CO2), and, the advantage of being utilized simultaneously for multiple technologies (e.g. carbon mitigation, biofuel production, and bioremediation) make microalgae suitable candidates for several ecofriendly technologies. Microalgae have developed an extensive spectrum of mechanisms (extracellular and intracellular) to cope with heavy metal toxicity. Their wide-spread occurrence along with their ability to grow and concentrate heavy metals, ascertains their suitability in practical applications of waste-water bioremediation. Heavy metal uptake by microalgae is affirmed to be superior to the prevalent physicochemical processes employed in the removal of toxic heavy metals. In order to evaluate their potential and to fill in the loopholes, it is essential to carry out a critical assessment of the existing microalgal technologies, and realize the need for development of commercially viable technologies involving strategic multidisciplinary approaches. This review summarizes several areas of heavy metal remediation from a microalgal perspective and provides an overview of various practical avenues of this technology. It particularly details heavy metals and microalgae which have been extensively studied, and provides a schematic representation of the mechanisms of heavy metal remediation in microalgae.

  12. HEAVY METAL LOADS IN THE SOIL OF DEBRECEN

    Directory of Open Access Journals (Sweden)

    SÁNDOR SZEGEDI

    2007-12-01

    Full Text Available Results of examinations on the amount, and spatial distribution of heavy metal compounds in the soil of Debrecen, their geographic, pedologic and ecologic aspects are presented in this study. The effects of the differences in traffic conditions, build-up/land use and the density of vegetation on the heavy metal content of the soils have been examined in city of Debrecen and its closer environment.Cadmium-, cobalt-, nickel-, lead-, and copper-contents of the soil samples taken from 88 sites of the sample area have been studied after acidic extraction, using atomic absorption spectrometer with the flame technique. Close-to-background concentrations of heavy metals in unpolluted soils of the forested area of the Nagyerd were determined. Spatial differences in the heavy metal content of the soils for the whole area of Debrecen have been studied. Influence of soil properties (humus, Calcium- Carbonate content, pH and grain-size distribution on the binding and mobility of heavy metals in the soil has been examined. Vertical distribution and mobility of heavy metal compounds in acid sandy soils was determined. Heavy metal content of soil in the most sensitive areas, playgrounds, recreational areas, urban gardens and grazing fields along busy roads has been surveyed.

  13. Toxicity of heavy metals and metal-containing nanoparticles on plants.

    Science.gov (United States)

    Mustafa, Ghazala; Komatsu, Setsuko

    2016-08-01

    Plants are under the continual threat of changing climatic conditions that are associated with various types of abiotic stresses. In particular, heavy metal contamination is a major environmental concern that restricts plant growth. Plants absorb heavy metals along with essential elements from the soil and have evolved different strategies to cope with the accumulation of heavy metals. The use of proteomic techniques is an effective approach to investigate and identify the biological mechanisms and pathways affected by heavy metals and metal-containing nanoparticles. The present review focuses on recent advances and summarizes the results from proteomic studies aimed at understanding the response mechanisms of plants under heavy metal and metal-containing nanoparticle stress. Transport of heavy metal ions is regulated through the cell wall and plasma membrane and then sequestered in the vacuole. In addition, the role of different metal chelators involved in the detoxification and sequestration of heavy metals is critically reviewed, and changes in protein profiles of plants exposed to metal-containing nanoparticles are discussed in detail. Finally, strategies for gaining new insights into plant tolerance mechanisms to heavy metal and metal-containing nanoparticle stress are presented. This article is part of a Special Issue entitled: Plant Proteomics--a bridge between fundamental processes and crop production, edited by Dr. Hans-Peter Mock.

  14. Removal of heavy metals through adsorption using sand

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The removal of four heavy metals i.e. Pb, Cr, Cu, and Zn from their aqueous solutions, using ordinary sand as an adsorbent, was studied at 20oC. The amount of metal adsorbed to form monolayer on sand(am), obtained from Langmuir isotherm, exhibited the preference of metals for sand in the order Pb>Cr>Cu>Zn. The heavy metal-sand adsorption phenomena can be illustrated on the basis of the interaction between surface functional group of silicates (sand) and the metal ions. It is deduced that sand can be used as a low cost adsorbent for the removal of heavy metal from wastewater (containing low conc. of metals), especially in the developing countries.

  15. Fractionation of Heavy Metals in Sediments from Dianchi Lake, China

    Institute of Scientific and Technical Information of China (English)

    LI Ren-Ying; YANG Hao; ZHOU Zhi-Gao; L(U) Jun-Jie; SHAO Xiao-Hua; JIN Feng

    2007-01-01

    Fractionation of heavy metals in sediments can help in understanding potential hazards of heavy metals.The present study analyzed total concentrations and fractions of selected heavy metals(Cd,Cr,Cu,Pb,and Zn)in surfaca sediments from Dianchi Lake,Yunnan Province,China,as well as factors that may affect distributions of the various heavy metal fractions.Total concentrations of the heavy metals decreased in the order Zn>Cu>Pb>Cr>Cd.These heavy metals,except Cr,were much higher than their background levels,indicating that Dianchi Lake was polluted by Cd,Zn,Pb,and Cu.Cadmium occurred mainly as the non-residual fraction(sum of the HOAc-soluble,reducible,and oxidizable fractions)(97.6%),and Zn(55.7%)was also predominantly found in the non-residual fraction.In contrast,most of the Cr(88.5%),Pb(81.8%),and Cu(59.2%)occurred in the residual fraction.Correlation analysis showed that total heavy metal concentrations,organic matter and reducible Fe were the main factors affecting the distributions of the various heavy metal fractions.In the Waihai section of Dianchi Lake (comprising 97%of the lake area),the concentrations of Cd,Zn,Pb,and Cu in the non-residual fraction were significantly lower(P≤0.01 or 0.05)than those of the Caohai section (3% of the lake area).This indicated that potential heavy metal hazards in the Caohai section were greater than the Waihai section.

  16. Temperature Sensitive Optical Phenomena in Heavy Metal Halide Films.

    Science.gov (United States)

    1979-01-08

    Heavy - metal halides such as Pb!2 and HgI2 exhibit a strongly tempera- ture dependent absorption edge at visible frequencies. The shift in the absorption...AOb9 537 ROCKWELL INTERNATIONAL ANAHEIM CA ELECTRONICS RESEAR—— ETC FIG L u G TEMPERATURE SENSITIVE OPTICAL PHENOMENA IN HEAVY METAL HALIDE F—— ETC (U...PHENOMENA IN HEAVY METAL HALIDE F — ET C( U) ,JAN 79 J D MC*LLEN, D M HEINZ. F S STEARNS DAAK7O— 77—C—01 6 5 UNCLASSIFIED C79 1501 _ _ U SB

  17. The influence of heavy metals on soil microflora

    Directory of Open Access Journals (Sweden)

    Štyriaková Iveta

    2002-12-01

    Full Text Available The aim of our contribution was to ascertain an influence of heavy metals on quantitative and qualitative composition of soil microflora. Our experiment was directed to quantitative isolation of culturable bacteria from individual soil samples and to the comparison of the amounts and colony morphology of the isolates from various soil samples. These soil samples were characteristic by a difference in pH, heavy metals and humus contents. Despite the differences between individual soil samples, the most of bacterial isolates were represented by Bacillus genus (especially Bacillus cereus and Bacillus mycoides which belongs to the heavy metal resistant bacterial kinds.

  18. Heavy Metals Stimulate Human LINE-1 Retrotransposition

    Directory of Open Access Journals (Sweden)

    Astrid M. Roy-Engel

    2005-04-01

    Full Text Available L1 and Alu elements are among the most active retroposons (mobile elements in the human genome. Several human diseases, including certain forms of breast cancer and leukemia, are associated with L1 and Alu insertions in functionally important areas of the genome. We present data demonstrating that environmental pollutants, such as heavy metals, can stimulate L1 retrotransposition in a tissue culture system using two different types of assays. The response to these agents was equivalent when using a cell line with a stably integrated L1 vector (genomic or a by introducing the L1 vector by transient transfection (episomal of the cell. Reproducible results showed that mercury (HgS, cadmium (CdS, and nickel (NiO increase the activity of L1 by an average of three (3 fold p<0.001. This observation is the first to link several carcinogenic agents with the increased retrotransposition activity of L1 as an alternate mechanism of generating genomic instability contributing to the process of carcinogenesis. Our results demonstrate that mobile element activation must be considered as one of the mechanisms when evaluating genomic damage/instability in response to environmental agents.

  19. Adsorption behavior of heavy metals on biomaterials.

    Science.gov (United States)

    Minamisawa, Mayumi; Minamisawa, Hiroaki; Yoshida, Shoichiro; Takai, Nobuharu

    2004-09-08

    We have investigated adsorption of Cd(II) and Pb(II) at pH 2-6.7 onto the biomaterials chitosan, coffee, green tea, tea, yuzu, aloe, and Japanese coarse tea, and onto the inorganic adsorbents, activated carbon and zeolite. High adsorptive capabilities were observed for all of the biomaterials at pH 4 and 6.7. In the adsorption of Cd(II), blend coffee, tea, green tea, and coarse tea have comparable loading capacities to activated carbon and zeolite. Although activated carbon, zeolite, and chitosan are utilized in a variety of fields such as wastewater treatment, chemical and metallurgical engineering, and analytical chemistry, these adsorbents are costly. On the other hand, processing of the test biomaterials was inexpensive, and all the biomaterials except for chitosan were able to adsorb large amounts of Pb(II) and Cd(II) ions after a convenient pretreatment of washing with water followed by drying. The high adsorption capability of the biomaterials prepared from plant materials is promising in the development of a novel, low-cost adsorbent. From these results, it is concluded that heavy metal removal using biomaterials would be an effective method for the economic treatment of wastewater. The proposed adsorption method was applied to the determination of amounts of Cd(II) and Pb(II) in water samples.

  20. Distribution of Heavy Hydrocarbon in Coal Seams and Its Use in Predicting Outburst of Coal

    Institute of Scientific and Technical Information of China (English)

    蒋承林; 李增华; 韩颖

    2003-01-01

    In order to verify whether any special gas component exists in outburst samples or not, coal samples from both outburst coal seams and non-outburst coal seams were collected. Some gases were extracted from the samples and analyzed qualitatively and quantitatively on chromatogram-mass spectrograph. The qualitative analysis show that there is no special gases in coal seams. And the quantitative analysis indicates that the heavy hydrocarbon content in coal samples from outburst coal seams is apparently higher than that from non-outburst district ones, which reflects the damage of geological tectonic movement to coal body in history. Therefore, the heavy hydrocarbon content of coal sample can be used as an index to predict coal outburst.

  1. Selection of ectomycorrhizal willow genotype in phytoextraction of heavy metals.

    Science.gov (United States)

    Hrynkiewicz, Katarzyna; Baum, Christel

    2013-01-01

    Willow clones are used for the phytoextraction of heavy metals from contaminated soils and are usually mycorrhizal. The receptiveness of willow clones for mycorrhizal inoculum varies specific to genotype; however, it is unknown if this might have a significant impact on their efficiency in phytoextraction of heavy metals. Therefore, a model system with mycorrhizal and non-mycorrhizal willows of two different genotypes--one with usually stronger natural mycorrhizal colonization (Salix dasyclados), and one with lower natural mycorrhizal colonization (S. viminalis)--was investigated for its efficiency of phytoextraction of heavy metals (Cd, Pb, Cu, Zn) from contaminated soil. Inoculation with the ectomycorrhizal fungus Amanita muscaria significantly decreased the biomass of leaves of both inoculated willow clones, and increased or had no effect on the biomass of trunks and roots of S. dasyclados and S. viminalis, respectively. The concentrations of heavy metals in the biomass of S. dasyclados were in general higher than in S. viminalis irrespective of inoculation with the ectomycorrhizal fungus. Inoculation with A. muscaria significantly decreased the concentration of Cu in the trunks of both Salix taxa, but did not affected the concentrations of other heavy metals in the biomass. In conclusion, stronger receptiveness of willow clones for mycorrhizal inoculum was correlated with an increased total extraction of heavy metals from contaminated soils. Therefore, this seems to be a suitable criterion for effective willow clone selection for phytoremediation. Increased biomass production with relatively constant metal concentrations seems to be a major advantage of mycorrhizal formation of willows in phytoremediation of contaminated soils.

  2. Short communication Assessment of heavy metal contamination in ...

    African Journals Online (AJOL)

    2016-05-27

    May 27, 2016 ... Assessment of heavy metal contamination in raw milk for human consumption ... 3 University of Veterinary and Animal Sciences, Lahore, Pakistan ..... vegetables irrigated with mixtures of wastewater and sewage sludge in ...

  3. Phycoremediation of Wastewater: Heavy Metal and Nutrient Removal Processes

    Directory of Open Access Journals (Sweden)

    Kwarciak-Kozłowska Anna

    2014-12-01

    Full Text Available Phycoremediation is the use of algae for the removal or biotrans-formation of pollutants from wastewater. The study is a novel at-tempt to integrate nutrient (N and P removal and some heavy met-als (iron, manganese and zinc bioaccumulation from municipal wastewater using two microalgae species: Chlorella vulgaris and Scenedesmus armatus. The Chlorella vulgaris showed higher re-moval of total nitrogen (TN both in influent and effluent waste water than Scenedesmus armatus. Nevertheless, more than 51% of total phosphorus (TP in effluent and 36% in influent wastewaters were removed by Scenedesmus armatus. More efficient microalga in heavy metal removal in influent wastewater was Scenedesmus armatus. The results showed that Chlorella vulgaris was appropriate for TN removal and bioaccumulation of heavy metals from effluent wastewater. Nevertheless, Scenedesmus armatus was highly pref-erable for heavy metals removal from influent wastewater.

  4. Heavy Metals Levels in Fish Samples from North Central Nigerian ...

    African Journals Online (AJOL)

    MBI

    2014-12-24

    Dec 24, 2014 ... Most aquatic organisms are capable of accumulating heavy metals to concentrations much higher than those present in water ... of their perseverance, high toxicity and their ... levels in water, sediment and fish food organism.

  5. Growth response and heavy metals tolerance of Axonopus affinis ...

    African Journals Online (AJOL)

    Jane

    2010-12-20

    Dec 20, 2010 ... assayed heavy metals, suggesting a synergistic effect between this species and the rhizobacterium in response ... soils, mainly in regions of copper and gold with great ..... enhance plant biomass production in mine tailings at.

  6. Heavy metal accumulation in a flow restricted, tropical estuary

    Digital Repository Service at National Institute of Oceanography (India)

    Balachandran, K.K.; Laluraj, C.M.; Nair, M.; Joseph, T.; Sheeba, P.; Venugopal, P.

    Levels of heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn), organic carbon content and textural characteristics in the surficial sediments of Cochin estuary (SW coast of India) and adjacent coast are presented. Anthropogenic inputs from...

  7. Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods

    Directory of Open Access Journals (Sweden)

    G. U. Chibuike

    2014-01-01

    Full Text Available Soils polluted with heavy metals have become common across the globe due to increase in geologic and anthropogenic activities. Plants growing on these soils show a reduction in growth, performance, and yield. Bioremediation is an effective method of treating heavy metal polluted soils. It is a widely accepted method that is mostly carried out in situ; hence it is suitable for the establishment/reestablishment of crops on treated soils. Microorganisms and plants employ different mechanisms for the bioremediation of polluted soils. Using plants for the treatment of polluted soils is a more common approach in the bioremediation of heavy metal polluted soils. Combining both microorganisms and plants is an approach to bioremediation that ensures a more efficient clean-up of heavy metal polluted soils. However, success of this approach largely depends on the species of organisms involved in the process.

  8. Heavy metal contaminants in Malapterurus electricus (Gmeli, 1789 ...

    African Journals Online (AJOL)

    The study was carried out to evaluate the potential health risk associated with the ... The concentrations of some heavy metals, Manganese (Mn), ... unity for the fish species confirming that these fish species were safe for human consumption.

  9. Detection of heavy metal by paper-based microfluidics.

    Science.gov (United States)

    Lin, Yang; Gritsenko, Dmitry; Feng, Shaolong; Teh, Yi Chen; Lu, Xiaonan; Xu, Jie

    2016-09-15

    Heavy metal pollution has shown great threat to the environment and public health worldwide. Current methods for the detection of heavy metals require expensive instrumentation and laborious operation, which can only be accomplished in centralized laboratories. Various microfluidic paper-based analytical devices have been developed recently as simple, cheap and disposable alternatives to conventional ones for on-site detection of heavy metals. In this review, we first summarize current development of paper-based analytical devices and discuss the selection of paper substrates, methods of device fabrication, and relevant theories in these devices. We then compare and categorize recent reports on detection of heavy metals using paper-based microfluidic devices on the basis of various detection mechanisms, such as colorimetric, fluorescent, and electrochemical methods. To finalize, the future development and trend in this field are discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Biomonitoring of heavy metals pollution in Lake Burullus, Northern ...

    African Journals Online (AJOL)

    aghomotsegin

    pectinatus, Ceratophyllum demersum and Najas armata); (floating species: ... good tools for heavy metal pollution markers, in the biological treatment of the polluted water and in ... from water and wetlands sediments (Gulati et al., 1979).

  11. heavy metal content in some commonly consumed vegetables from ...

    African Journals Online (AJOL)

    dell

    This work reports on the levels of cadmium, lead, copper, manganese and zinc in 174 samples from eight varieties of ... Keywords: Heavy metals, Vegetables, Daily intake, Kariakoo market, Food safety ... well as crop rotation system can affect.

  12. Changes in Rheological Properties and Heavy Metal Content of an ...

    African Journals Online (AJOL)

    Prof. Ogunji

    Keywords: Ash, rheological properties, heavy metal, maize yield. ... have beneficial effects on soil nutrients, soil physical conditions, soil biological .... matter yield observed in ash amended plots could be attributed to the reduction of soil pH.

  13. Toxic effect of heavy metals on aquatic environment | Baby ...

    African Journals Online (AJOL)

    Toxic effect of heavy metals on aquatic environment. ... International Journal of Biological and Chemical Sciences ... Remediation approaches such as excavation and land fill, thermal treatment, electroreclamation and soil capping have been ...

  14. Evaluation of Antibiotic Resistance Patterns and Heavy Metals ...

    African Journals Online (AJOL)

    PROF HORSFALL

    Department of Environmental Management and Toxicology, Faculty of Life Sciences, University of Benin, P.M.B 1154, Benin City, ... and the use of vehicles for transportation release high .... indicates the toxic effect of the heavy metals on the.

  15. Adsorption of heavy metal from landfill leachate by wasted biosolids

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... Key words: Adsorption, biomass waste, heavy metal, synthetic water, leachate. INTRODUCTION ... Gadd, 1993; White et al., 1997). There is also ..... The performance of natural clay as a barrier to the diffusion of municipal ...

  16. A study on heavy metal concentration in Izmit gulf

    National Research Council Canada - National Science Library

    Hasibe Cingilli

    2006-01-01

    Water samples taken from thirteen different stations and from three streams in İzmit Gulf where the pollution is very high have been investigated with Atomic Absorption Spectrometre for heavy metal...

  17. Accumulation of heavy metals in oil-contaminated peat soils

    Science.gov (United States)

    Vodyanitskii, Yu. N.; Savichev, A. T.; Trofimov, S. Ya.; Shishkonakova, E. A.

    2012-10-01

    X-ray fluorescence and X-ray radiometry represent easy and simple methods to determine concentrations of heavy metals in the ash of peat soils contaminated with oil and can be applied for soil monitoring purposes. Oil spills on peat bogs produce two contamination zones differing in the composition of heavy metals. In the zone of primary contamination, the peat surface is covered by a bitumen crust with V, Ni, Sr, Ba, Ce, and La accumulating there. This zone adjoins the zone of secondary peat contamination, where heavy alkaline-earth metals (Sr, Ba) and lanthanides (Ce and La) are accumulated to a lesser extent. Biological preparations recommended for remediation of oil-contaminated peat soils should be tolerant to high concentrations of heavy metals, particularly, V, Ni, and Ba that are present in the oil contaminated soils in relatively high amounts.

  18. Investigation of the origin and distribution of heavy metals around ...

    African Journals Online (AJOL)

    2010-04-28

    Apr 28, 2010 ... around Ebenezer Dam, Limpopo Province, South Africa. JS Ogola1*, HR ... Concentrations of heavy metals in water around the Ebenezer Dam were found to be less than 0.01 mg/g , ..... World Health Organization, Geneva.

  19. HEAVY METAL CONCENTRATION OF SOIL IN THE REGIONAL CITY PLAYGROUNDS

    Science.gov (United States)

    Nakagawa, Kei; Tsuzuki, Megumi; Asakura, Hiroshi

    It seems important to examine heavy metal concentration in playgrounds, to evaluate potential risk for heavy metal ingestion by children. In this study, heavy metal concentrations of soil samples in 40 playgrounds in K-city were investigated by the voltammetric method. To visualize heavy metal concentration distribution in playgrounds, free GIS software MANDARA was used. According to the comparison between the 1 N HCl dissolved concentration and the PTWI (Provisional Tolerable Weekly Intake), playgrounds in K-city may not have intake risk of lead. Even if the possibility of the risk was very low, there are differences of the intensities. As for the specific playground where concentration is high, investigating continuously may be desirable hereafter.

  20. A bioseparation process for removing heavy metals from waste ...

    African Journals Online (AJOL)

    A bioseparation process for removing heavy metals from waste water using biosorbents. ... In recent years, many low cost sorbents such as algae, fungi bacteria and ... In this comprehensive review, the emphasis is on outlining the occurrences ...

  1. Removal of heavy metals from waste water of tanning leather ...

    African Journals Online (AJOL)

    LG

    2013-07-03

    Jul 3, 2013 ... Department of Biology, Faculty of Science, Taibah University, AL-Madinah AL- Munawarah, Kingdom of Saudi Arabia. Accepted 19 ... Key words: Fungi, industrial wastewater, biosorption, heavy metals. ... Such treatments are.

  2. The effect of heavy metals on peroxidase from Jerusalem artichoke ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-07-04

    Jul 4, 2008 ... African Journal of Biotechnology Vol. ... EU/mg. The substrate specificity of peroxidase was investigated ... compounds, removal of phenolics from waste waters and ... Heavy metal pollution occurs in many industrial waste-.

  3. Heavy metal concentrations in soils and accumulation in plants ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-09-03

    Sep 3, 2008 ... An auto battery manufacturing company dumped slag containing proportion of heavy metals in ... their shoot over a wide range of soil concentrations. They ... capacity of plants that grew naturally on metalliferous wastes and ...

  4. Heavy Metal Contamination of Soils and Vegetation around Solid ...

    African Journals Online (AJOL)

    MICHAEL

    The mean concentrations of zinc in soil and vegetations along the transect ... wastes contributed to the levels of heavy metals in soils and vegetation. ...... Current Topics in Toxicology. Vol. ... seminar on collaborative Agricultural Research.

  5. Simulation of heavy metal contamination of fresh water bodies: Toxic ...

    African Journals Online (AJOL)

    Simulation of heavy metal contamination of fresh water bodies: Toxic effects in the catfish and its amelioration with co-contamination with glyphosate. ... Journal of Applied Sciences and Environmental Management. Journal Home · ABOUT ...

  6. Microbial and heavy metal contamination of pineapple products ...

    African Journals Online (AJOL)

    SAM

    Key words: Pineapple, juices, jams, microbial contamination, heavy metal, Rwanda. ..... material used. This was obvious ... sterilise the product employing boiling pots and package .... that post-harvest, processing and preservation techniques.

  7. Influence of different concentration of heavy metals on the seed ...

    African Journals Online (AJOL)

    use

    Some heavy metals in higher doses may cause metabolic disorders and growth inhibition for most of ... doses of these compounds affected the germination and some growth indices. ... ment causing oxidative stress both in roots and leaves.

  8. Combined toxicity of heavy metal mixtures in liver cells.

    Science.gov (United States)

    Lin, Xialu; Gu, Yuanliang; Zhou, Qi; Mao, Guochuan; Zou, Baobo; Zhao, Jinshun

    2016-09-01

    With rapid industrialization, China is now facing great challenges in heavy metal contamination in the environment. Human exposure to heavy metals through air, water and food commonly involves a mixture consisting of multiple heavy metals. In this study, eight common heavy metals (Pb, Cd, Hg, Cu, Zn, Mn, Cr, Ni) that cause environmental contamination were selected to investigate the combined toxicity of different heavy metal mixtures in HL7702 cells. Toxicity (24 h LC50 ) of each individual metal on the cells ranked Hg > Cr = Cd > Cu > Zn > Ni > Mn > Pb; toxicity of the different mixtures ranked: M5 > M3PbHgCd > M5+Mn > M5+Cu > M2CdNi > M4A > M8-Mn > M8 > M5+Zn > M4B > M8-Cr > M8-Zn > M8-Cu > M8-Pb > M8-Cd > M8-Hg > M8-Ni > M3PbHgNi > M3CuZnMn. The cytotoxicity data of individual metals were successfully used to build the additive models of two- to eight-component metal mixtures. The comparison between additive model and combination model or partly additive model was useful to evaluate the combined effects in mixture. Synergistic, antagonistic or additive effects of the toxicity were observed in different mixtures. These results suggest that the combined effects should be considered in the risk assessment of heavy metal co-exposure, and more comprehensive investigations on the combined effects of different heavy metal mixtures are needed in the future. Copyright © 2016 John Wiley & Sons, Ltd.

  9. Molecular mechanisms of heavy metal hyperaccumulation and phytoremediation.

    Science.gov (United States)

    Yang, Xiaoe; Feng, Ying; He, Zhenli; Stoffella, Peter J

    2005-01-01

    A relatively small group of hyperaccumulator plants is capable of sequestering heavy metals in their shoot tissues at high concentrations. In recent years, major scientific progress has been made in understanding the physiological mechanisms of metal uptake and transport in these plants. However, relatively little is known about the molecular bases of hyperaccumulation. In this paper, current progresses on understanding cellular/molecular mechanisms of metal tolerance/hyperaccumulation by plants are reviewed. The major processes involved in hyperaccumulation of trace metals from the soil to the shoots by hyperaccumulators include: (a) bioactivation of metals in the rhizosphere through root-microbe interaction; (b) enhanced uptake by metal transporters in the plasma membranes; (c) detoxification of metals by distributing to the apoplasts like binding to cell walls and chelation of metals in the cytoplasm with various ligands, such as phytochelatins, metallothioneins, metal-binding proteins; (d) sequestration of metals into the vacuole by tonoplast-located transporters. The growing application of molecular-genetic technologies led to the well understanding of mechanisms of heavy metal tolerance/accumulation in plants, and subsequently many transgenic plants with increased resistance and uptake of heavy metals were developed for the purpose of phytoremediation. Once the rate-limiting steps for uptake, translocation, and detoxification of metals in hyperaccumulating plants are identified, more informed construction of transgenic plants would result in improved applicability of the phytoremediation technology.

  10. Production of a New Emulsifier Material for the Formation Heavy Hydrocarbon/Water Emulsion

    Directory of Open Access Journals (Sweden)

    Afshin Farahbakhsh

    2011-04-01

    Full Text Available Emulsifiers are a unique class of compounds that have proved to have a variety of potential applications in formation of hydrocarbon in water emulsion, in enhancement of oil recovery and in the reduction of heavy oil viscosity. In this paper, a bio emulsifier was synthesized by a strain of Bacillus licheniformis and was separated by an autoclave and centrifugal process; the purification of bio emulsifier and the increase quality of product was done by adding sulfuric acid (H2SO4 (98% to the solution and centrifuging this compound again. This bio emulsifier has the property of emulsification to a wide range of heavy hydrocarbon to form a stable hydrocarbon-water emulsion. This bio emulsifier could reduce Iranian Nuroze high viscosity oil of about 10000 cP down to 250 cP. This means about 97% decreases in the viscosity. The emulsion stable this condition for 48 hr and the viscosity slowly increases to 4000cp until 192 hr. The stability of the oil in water emulsion during 48hr allows the heavy oil to be transported practically over lengthy distances or remain stable for long periods of time prior to utilization.

  11. classification of plants according to their heavy metal content around ...

    African Journals Online (AJOL)

    Mgina

    nickel) by AAS. Of 15 plant species; 10, 6, 6 were hyperaccumulators, excluders and indicators for heavy ... Classification of plants according to their heavy metal content … 110 die-off. ..... vegetable plants I. Use of a filtered air growth cabinet.

  12. Heavy metal and organic contaminants in mangrove ecosystems of China: a review.

    Science.gov (United States)

    Zhang, Zai-Wang; Xu, Xiang-Rong; Sun, Yu-Xin; Yu, Shen; Chen, Yong-Shan; Peng, Jia-Xi

    2014-10-01

    China's rapid economic growth has been accompanied by increasing environmental pollution. Mangrove ecosystems are now facing greater pollution pressures due to elevated chemical discharges from various land-based sources. Data on the levels of heavy metals and organic pollutants in mangrove compartments (sediments, plants, zoobenthos, and fish) in China over the past 20 years have been summarized to evaluate the current pollution status of the mangrove ecosystem. Overall, the Pearl River and Jiulong River estuaries were severely polluted spots. Concentrations of Cu, Zn, Cd, and Pb in mangrove sediments of Guangdong, Fujian, and Hong Kong were higher than those from Guangxi and Hainan. The pollution status was closely linked to industrialization and urbanization. The highest concentrations of polycyclic aromatic hydrocarbons (PAHs) were found in mangrove sediments from Hong Kong, followed by Fujian and Guangdong. Mangrove plants tend to have low-enriched ability for heavy metals and organic pollutants. Much higher levels of Pb, Cd, and Hg were observed in mollusks.

  13. Heavy metal cumulation in crops after the sewage sludge application

    Directory of Open Access Journals (Sweden)

    Gondová Andrea

    1998-12-01

    Full Text Available During 1995 - 1996 the crops samples after the sewage sludge application were collected. The heavy metals cumulation in investigated crops from Bardejov increased in order: Zn > Cu > Pb > Ni > Cr > Cd and Banská Bystrica : Zn > Cu > Cr > Ni > Pb > Cd. Heavy metals contents after the sewage sludge application were increased in comparison with the highest admissible concentration in eatable part of crops. The sewage sludge application were not recommended in soils for the growth of vegetables

  14. Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods

    OpenAIRE

    Chibuike, G. U.; Obiora, S. C.

    2014-01-01

    Soils polluted with heavy metals have become common across the globe due to increase in geologic and anthropogenic activities. Plants growing on these soils show a reduction in growth, performance, and yield. Bioremediation is an effective method of treating heavy metal polluted soils. It is a widely accepted method that is mostly carried out in situ; hence it is suitable for the establishment/reestablishment of crops on treated soils. Microorganisms and plants employ different mechanisms for...

  15. Spatiotemporal Analysis of Heavy Metal Water Pollution in Transitional China

    OpenAIRE

    Huixuan Li; Yingru Li; Ming-Kuo Lee; Zhongwei Liu; Changhong Miao

    2015-01-01

    China’s socioeconomic transitions have dramatically accelerated its economic growth in last three decades, but also companioned with continuous environmental degradation. This study will advance the knowledge of heavy metal water pollution in China from a spatial–temporal perspective. Specifically, this study addressed the following: (1) spatial patterns of heavy metal water pollution levels were analyzed using data of prefecture-level cities from 2004 to 2011; and (2) spatial statistical met...

  16. Distribution of heavy metals from flue gas in algal bioreactor

    Science.gov (United States)

    Napan, Katerine

    Flue gas from coal-fired power plants is a major source of CO2 to the atmosphere. Microalgae can use this enriched form of CO2 as carbon source and in turn the biomass can be used to produce food, feed, fertilizer and biofuels. However, along with CO2, coal-based flue gas will inevitably introduce heavy metals, which have a high affinity to bind algal cells, could be toxic to the organisms and if transferred to the products could limit their uses. This study seeks to address the distribution and impact of heavy metals present in flue gas on microalgae production systems. To comprehend its effects, algae Scenedesmus obliquus was grown in batch reactors in a multimetal system. Ten heavy metals (Cu, Co, Zn, Pb, As, Se, Cr, Hg, Ni and Cd) were selected and were evaluated at four concentrations (1X, 2X, 5X and 10X). Results show that most heavy metals accumulated mainly in biomass and were found in very low concentrations in media. Hg was shown to be lost from the culture, with low amounts present in the biomass. An upper limit for As uptake was observed, suggesting its likelihood to build-up in the system during medium recycle. The As limited bioaccumulation was overcome by addition of sulfur to the algal medium. Heavy metal at 2X, 5X and 10X inhibited both growth and lipid production, while at the reference concentration both biomass and lipids yields were increased. Heavy metal concentrations in the medium and biomass were time dependent, and at the end of the cultivation most heavy metals in the supernatant solution complied with the recommendations for irrigation water, while biomass was below limits for cattle and poultry feed, fertilizer, plastic and paper. This research shows that bioremediation of CO2 and heavy metals in combination with energy production can be integrated, which is an environmentally friendly form of biotechnology.

  17. Spatiotemporal Analysis of Heavy Metal Water Pollution in Transitional China

    OpenAIRE

    Huixuan Li; Yingru Li; Ming-Kuo Lee; Zhongwei Liu; Changhong Miao

    2015-01-01

    China’s socioeconomic transitions have dramatically accelerated its economic growth in last three decades, but also companioned with continuous environmental degradation. This study will advance the knowledge of heavy metal water pollution in China from a spatial–temporal perspective. Specifically, this study addressed the following: (1) spatial patterns of heavy metal water pollution levels were analyzed using data of prefecture-level cities from 2004 to 2011; and (2) spatial statistical met...

  18. Heavy metal music and drug abuse in adolescents.

    Science.gov (United States)

    King, P

    1988-04-01

    A large number of adolescents in a psychiatric population, particularly those who are chemically dependent, prefer to listen to heavy metal music. Young people who do not identify with traditional values may find simple but unconventional answers to complex problems in the lyrics of this type of music. While a clearcut relationship cannot be established between heavy metal music and destructive behavior, evidence shows that such music promotes and supports patterns of drug abuse, promiscuous sexual activity, and violence.

  19. Efficacy of Locust Beans Husk Char in Heavy Metal Sequestration

    OpenAIRE

    Ademola Ayodeji Ajayi-Banji; Temitayo Ewemoje; Adeniyi Ajimo

    2016-01-01

    Most solid waste management schemes minimally consider low concentration biodegradable agricultural waste management, though the environmental impact of this waste category is significant over a time frame. The column-mode study seeks to address the issue by suggesting potential utilisation of post-harvest waste for heavy metal sequestering. Locust beans husk char of 100 and 200 g was employed to inspect removal efficiency, isotherm and kinetic models of some heavy metals at 30, 60, 90, 120 a...

  20. Determination of heavy metals in edible mushrooms consumed in Shahrekord

    OpenAIRE

    Khodabakhshi A; Sedehi M; Shakeri K

    2016-01-01

    Background and aims: Heavy metal pollution is a major problem in the environmental and health concerns of food. Toxic elements in the environment of mushrooms may be attracted to them, in which case the problem will create mushroom consumption. This study was aimed to determine the concentration of heavy metals, manganese, chromium, iron, lead, zinc and copper in mushroom consumed in Shahrekord. Methods: This study was a cross- sectional research. 6 samples of the edible mushroom cultiv...

  1. Mosses accumulate heavy metals from the substrata of coal ash

    OpenAIRE

    Vukojević Vanja; Sabovljević Marko; Jovanović S.

    2005-01-01

    Plants that are able to accumulate and tolerate extraordinarily high concentrations of heavy metals (hyperaccumulators) can be used for phytoremediation (removal of contaminants from soils) or phytomining (growing a crop of plants to harvest the metals). Two moss species, Bryum capillare Hedw. and Ceratodon purpureus Hedw., were tested as potential phytoremedies under in vivo conditions on a coal ash disposal site in the surroundings of Obrenovac (NW Serbia). The content of various heavy meta...

  2. Comparison of Eleven Heavy Metals in Moringa Oleifera Lam. Products.

    Science.gov (United States)

    Limmatvapirat, C; Limmatvapirat, S; Charoenteeraboon, J; Wessapan, C; Kumsum, A; Jenwithayaamornwech, S; Luangthuwapranit, P

    2015-01-01

    Eleven heavy metals in various products of Moringa oleifera were analyzed to determine eleven heavy metals (Al, As, Cd, Cr, Cu, Fe, Pb, Mn, Hg, Ni, and Zn) using Inductively Coupled Plasma-Mass Spectrometry. The products of M. oleifera were purchased in Nakhon Pathom, Thailand. All products were digested with nitric acid solution before determining the concentrations of heavy metals. The recoveries of all heavy metals were found to be in the range of 99.89-103.05%. Several criteria such as linearity, limits of detection, limits of quantification, specificity, precision under repeatability conditions and intermediate precision reproducibility were evaluated. Results indicate that this method could be used in the laboratory for determination of eleven heavy metals in M. oleifera products with acceptable analytical performance. The results of analysis showed that the highest concentrations of As, Cr, Hg, and Mn were found in tea leaves while the highest concentrations of Al, Cd, Cu, Fe, Ni, Pb, and Zn were found in leaf capsules. Continuous monitoring of heavy metals in M. oleifera products is crucial for consumer health.

  3. Comparison of eleven heavy metals in moringa oleifera lam. products

    Directory of Open Access Journals (Sweden)

    C Limmatvapirat

    2015-01-01

    Full Text Available Eleven heavy metals in various products of Moringa oleifera were analyzed to determine eleven heavy metals (Al, As, Cd, Cr, Cu, Fe, Pb, Mn, Hg, Ni, and Zn using Inductively Coupled Plasma-Mass Spectrometry. The products of M. oleifera were purchased in Nakhon Pathom, Thailand. All products were digested with nitric acid solution before determining the concentrations of heavy metals. The recoveries of all heavy metals were found to be in the range of 99.89-103.05%. Several criteria such as linearity, limits of detection, limits of quantification, specificity, precision under repeatability conditions and intermediate precision reproducibility were evaluated. Results indicate that this method could be used in the laboratory for determination of eleven heavy metals in M. oleifera products with acceptable analytical performance. The results of analysis showed that the highest concentrations of As, Cr, Hg, and Mn were found in tea leaves while the highest concentrations of Al, Cd, Cu, Fe, Ni, Pb, and Zn were found in leaf capsules. Continuous monitoring of heavy metals in M. oleifera products is crucial for consumer health.

  4. Research on heavy metal pollution of river Ganga: A review

    Directory of Open Access Journals (Sweden)

    Dipak Paul

    2017-06-01

    Full Text Available River Ganga is considered sacred by people of India for providing life sustenance to environment and ecology. Anthropogenic activities have generated important transformations in aquatic environments during the last few decades. Advancement of human civilization has put serious questions to the safe use of river water for drinking and other purposes. The river water pollution due to heavy metals is one of the major concerns in most of the metropolitan cities of developing countries. These toxic heavy metals entering the environment may lead to bioaccumulation and biomagnifications. These heavy metals are not readily degradable in nature and accumulate in the animal as well as human bodies to a very high toxic amount leading to undesirable effects beyond a certain limit. Heavy metals in riverine environment represent an abiding threat to human health. Exposure to heavy metals has been linked to developmental retardation, kidney damage, various cancers, and even death in instances of very high exposure. The following review article presents the findings of the work carried out by the various researchers in the past on the heavy metal pollution of river Ganga.

  5. Removal of Heavy Metals from Textile Wastewater using Zeolite

    Directory of Open Access Journals (Sweden)

    Normala Halimoon

    2010-01-01

    Full Text Available Heavy metals such as lead (Pb, chromium (Cr, cadmium (Cd and copper (Cu are widely used for production of colour pigments of textile dyes. Textile dyes pollutants are being released to the environment at various stages of operation therefore it is necessary that the pollutants are treated before discharge using zeolite with and without alum. A study was carried out to compare the effectiveness of treatment using zeolite with and without alum for the removal of heavy metals (Pb, Cu, Cd, Cr in textile effluent. The concentrations of these heavy metals in the textile wastewater samples were reduced to more than 50 percent after treating with zeolite. The sequence in increasing order of removal efficiency of these heavy metals using zeolite was Cd < Pb < Cr < Cu. When the textile wastewater sample was treated using zeolite and 10 mg/L of alum, 80% of the heavy metals (Cd and Cu were removed. The most effective treatment prior to removal of heavy metals from textile wastewater sample is by using zeolite with the addition of 10 mg/L of alum as flocculants.

  6. Factors Affecting the Binding of a Recombinant Heavy Metal-Binding Domain (CXXC motif Protein to Heavy Metals

    Directory of Open Access Journals (Sweden)

    Kamala Boonyodying

    2012-06-01

    Full Text Available A number of heavy metal-binding proteins have been used to study bioremediation. CXXC motif, a metal binding domain containing Cys-X-X-Cys motif, has been identified in various organisms. These proteins are capable of binding various types of heavy metals. In this study, heavy metal binding domain (CXXC motif recombinant protein encoded from mcsA gene of S. aureus were cloned and overexpressed in Escherichia coli. The factors involved in the metal-binding activity were determined in order to analyze the potential of recombinant protein for bioremediation. A recombinant protein can be bound to Cd2+, Co2+, Cu2+ and Zn2+. The thermal stability of a recombinant protein was tested, and the results showed that the metal binding activity to Cu2+ and Zn2+ still exist after treating the protein at 85ºC for 30 min. The temperature and pH that affected the metal binding activity was tested and the results showed that recombinant protein was still bound to Cu2+ at 65ºC, whereas a pH of 3-7 did not affect the metal binding E. coli harboring a pRset with a heavy metal-binding domain CXXC motif increased the resistance of heavy metals against CuCl2 and CdCl2. This study shows that metal binding domain (CXXC motif recombinant protein can be effectively bound to various types of heavy metals and may be used as a potential tool for studying bioremediation.

  7. Changes in the biological activity of heavy metal- and oil-polluted soils in urban recreation territories

    Science.gov (United States)

    Trifonova, T. A.; Zabelina, O. N.

    2017-04-01

    Urban recreation areas of different sizes were investigated in the city of Vladimir. The degree of their contamination with heavy metals and oil products was revealed. The content of heavy metals exceeded their maximum permissible concentrations by more than 2.5 times. The total content of heavy metals decreased in the sequence: Zn > Pb > Co > Mn > Cr > Ni. The mass fraction of oil products in the studied soils varied within the range of 0.016-0.28 mg/g. The reaction of soils in public gardens and a boulevard was neutral or close to neutral; in some soil samples, it was weakly alkaline. The top layer of all the soils significantly differed from the lower one by the higher alkalinity promoting the deposition of heavy metals there. As the content of Ni, Co, and Mn increased and exceeded the background concentrations, but did not reach the three-fold value of the maximum permissible concentrations, the activity of catalase was intensified. The stimulating effect of nickel on the catalase activity was mostly pronounced at the neutral soil reaction. The urease activity increased when heavy metals and oil products were present together in the concentrations above the background ones, but not higher than the three-fold maximal permissible concentrations for heavy metals and 0.3 mg/g for the content of oil products. The nitrifying activity was inhibited by oil hydrocarbons that were recorded in the soils in different amounts.

  8. Heavy metals in five Sabellidae species (Annelida, Polychaeta): ecological implications.

    Science.gov (United States)

    Giangrande, Adriana; Licciano, Margherita; Del Pasqua, Michela; Fanizzi, Francesco Paolo; Migoni, Danilo; Stabili, Loredana

    2017-02-01

    The present work analyzed three hard-bottom and two soft-bottom species of sabellid polychaetes to determine the content of several heavy metals in their branchial crown and body. The highest concentrations of heavy metals were recorded in the hard-bottom species Branchiomma bairdi, a recent Mediterranean introduction. Differences in the metal concentrations were most notable in the high trace metal levels of the branchial crown for all the studied species. Statistical analysis showed that the Mediterranean hard-bottom species were similar each other in their heavy metal content in the body as well as in the branchial crown and appeared separated from all the other species. Arsenic and vanadium hyperaccumulation in the branchial crowns of the considered sabellid species probably acts as a deterrent for predation. The observed differences among the examined species were discussed not only at the light of habitat colonization but also in terms of the phylogeny.

  9. Soil reclamation by municipal sewage compost: Heavy metals migration study.

    Science.gov (United States)

    Kowalkowski, Tomasz; Buszewski, Bogusław

    2009-04-01

    This paper describes sorption and transport phenomena of selected heavy metals (e.g., Pb, Zn, Ni and Cu) in the superficial layer of soil and sewage sludge compost. The main aim of the study was the investigation of possibility of heavy metals contamination in soil profile reclaimed by sewage sludge compost. The column leaching test as well as the sequential Tessier extraction procedure were applied to investigate the mitigation of heavy metals. The results revealed that distribution of metals in specific Tessier fractions was the major factor influencing their transport in the investigated soils profiles. Moreover, sorption capacity of the soil sample studied was substantially greater to prevent transportation of metals into the lower horizons and groundwater.

  10. Decontamination of metals and polycyclic aromatic hydrocarbons from slag-polluted soil.

    Science.gov (United States)

    Bisone, Sara; Mercier, Guy; Blais, Jean-François

    2013-01-01

    Metallurgy is an industrial activity that is one of the largest contributors to soil contamination by metals. This contamination is often associated with organic compound contamination; however, little research has been aimed at the development of simultaneous processes for decontamination as opposed to treatments to heavy metals or organic compounds alone. This paper presents an efficient process to decontaminate the soils polluted with smelting by-products rich in Cu, Zn and polycyclic aromatic hydrocarbons (PAHs). A simultaneous treatment for metals and PAHs was also tested. The process is mainly based on physical techniques, such as crushing, gravimetric separation and attrition. For the finest particle size fractions, an acid extraction with H2SO4 was used to remove metals. The PAH removal was enhanced by adding surfactant during attrition. The total metal removals varied from 49% to 73% for Cu and from 43% to 63% for Zn, whereas a removal yield of 92% was measured for total PAHs. Finally, a technical-economic evaluation was done for the two processes tested.

  11. Assessment of heavy metal removal technologies for biowaste by physico-chemical fractionation

    NARCIS (Netherlands)

    Veeken, A.H.M.; Hamelers, H.V.M.

    2003-01-01

    In the Netherlands, the heavy metal content of biowaste-compost frequently exceeds the legal standards for heavy metals. In order to assess heavy metal removal technologies, a physico-chemical fractionation scheme was developed to gain insight into the distribution of heavy metals (Cd, Cu, Pb and Zn

  12. Assessment of heavy metal removal technologies for biowaste by physico-chemical fractionation

    NARCIS (Netherlands)

    Veeken, A.H.M.; Hamelers, H.V.M.

    2003-01-01

    In the Netherlands, the heavy metal content of biowaste-compost frequently exceeds the legal standards for heavy metals. In order to assess heavy metal removal technologies, a physico-chemical fractionation scheme was developed to gain insight into the distribution of heavy metals (Cd, Cu, Pb and Zn

  13. Assessment of heavy metal removal technologies for biowaste by physico-chemical fractionation

    NARCIS (Netherlands)

    Veeken, A.H.M.; Hamelers, H.V.M.

    2003-01-01

    In the Netherlands, the heavy metal content of biowaste-compost frequently exceeds the legal standards for heavy metals. In order to assess heavy metal removal technologies, a physico-chemical fractionation scheme was developed to gain insight into the distribution of heavy metals (Cd, Cu, Pb and

  14. Short-term uptake of heavy metals by periphyton algae

    Energy Technology Data Exchange (ETDEWEB)

    Vymazal, J.

    1984-12-31

    The utilization of periphyton for the removal of heavy metals from enriched small streams has been examined. By means of short-term batch laboratory experiments the courses of metal uptake have been studied. For uptake study naturally growing periphyton community and periphytic filamentous algae Cladophora glomerata and Oedogonium rivulare have been used. Uptakes of nine heavy metals (Pb, Cd, Cu, Co, Cr, Ni, Zn, Fe and Mn) have been determined during four hours exposure. In addition the influence of humic substances on heavy metals uptake has been determined. Uptake of all metals increased during four hours exposure but not in the same way. Some metals were removed continuously (Ni, Cr, Fe and Mn), other metals were removed more rapidly during the first hour or first two hours of exposure and then only slight removal continued (Cu, Pb, Cd, Co). Uptake of Zn was rather unambiguous. Results of these experiments suggest that the course of uptake for individual metals could be similar for most periphyton algae. It was established that humic substances significantly reduce heavy metals uptake. The highest decrease of uptake was observed in Cu, Cr, Co and Cd. The results of model experiments are being tested in a pilot scale with respect to the demands of engineering practice. (J.R.)

  15. Immunotoxicology in wood mice along a heavy metal pollution gradient

    Energy Technology Data Exchange (ETDEWEB)

    Tersago, Katrien [Department of Biology, Evolutionary Biology Group, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium)]. E-mail: katrien.tersago@ua.ac.be; De Coen, Wim [Department of Biology, Ecophysiology, Biochemistry and Toxicology Group, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Scheirs, Jan [Department of Biology, Evolutionary Biology Group, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Vermeulen, Katrien [Department of Medicine, Laboratory of Experimental Hematology, University of Antwerp, Antwerp University Hospital, Universiteitsplein 1, B-2610 Wilrijk (Belgium); Blust, Ronny [Department of Biology, Ecophysiology, Biochemistry and Toxicology Group, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Bockstaele, Dirk van[Department of Medicine, Laboratory of Experimental Hematology, University of Antwerp, Antwerp University Hospital, Universiteitsplein 1, B-2610 Wilrijk (Belgium); Verhagen, Ron [Department of Biology, Evolutionary Biology Group, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium)

    2004-12-01

    We carried out an immunotoxicological field study of wood mice in three populations along a heavy metal pollution gradient. Heavy metal concentrations in liver tissue indicated that exposure to silver, arsenic, cadmium, cobalt and lead decreased with increasing distance from a non-ferrous smelter. Host resistance to the endoparasite Heligmosomoides polygyrus decreased with increasing exposure, while the abundance of tick larvae and the nematode Syphacia stroma was unrelated to heavy metal exposure. Spleen mass was increased at the intermediate and the most polluted sites and was positively correlated with the number of H. polygyrus and tick larvae. Proportion of early apoptotic leukocytes increased towards the smelter and was positively related to cadmium exposure. Red and white blood cell counts and lysozyme activity showed no relationship with metal exposure. All together, our observations suggest negative effects of heavy metal exposure on the immune function of wood mice under field conditions. - Capsule: Complex interactions among metal burden, immune response and parasite burden suggest negative effects of heavy metal exposure on the immune system of wood0011 mi.

  16. Heavy metal music meets complexity and sustainability science.

    Science.gov (United States)

    Angeler, David G

    2016-01-01

    This paper builds a bridge between heavy metal music, complexity theory and sustainability science to show the potential of the (auditory) arts to inform different aspects of complex systems of people and nature. The links are described along different dimensions. This first dimension focuses on the scientific aspect of heavy metal. It uses complex adaptive systems theory to show that the rapid diversification and evolution of heavy metal into multiple subgenres leads to a self-organizing and resilient socio-musicological system. The second dimension builds on the recent use of heavy metal as a critical thinking model and educational tool, emphasizing the artistic component of heavy metal and its potential to increase people's awareness of environmental sustainability challenges. The relationships between metal, complexity theory and sustainability are first discussed independently to specifically show mechanistic links and the reciprocal potential to inform one domain (science) by the other (metal) within these dimensions. The paper concludes by highlighting that these dimensions entrain each other within a broader social-cultural-environmental system that cannot be explained simply by the sum of independent, individual dimensions. Such a unified view embraces the inherent complexity with which systems of people and nature interact. These lines of exploration suggest that the arts and the sciences form a logical partnership. Such a partnership might help in endeavors to envision, understand and cope with the broad ramifications of sustainability challenges in times of rapid social, cultural, and environmental change.

  17. Electrokinetic treatment of an agricultural soil contaminated with heavy metals.

    Science.gov (United States)

    Figueroa, Arylein; Cameselle, Claudio; Gouveia, Susana; Hansen, Henrik K

    2016-07-28

    The high organic matter content in agricultural soils tends to complex and retain contaminants such as heavy metals. Electrokinetic remediation was tested in an agricultural soil contaminated with Co(+2), Zn(+2), Cd(+2), Cu(+2), Cr(VI), Pb(+2) and Hg(+2). The unenhanced electrokinetic treatment was not able to remove heavy metals from the soil due to the formation of precipitates in the alkaline environment in the soil section close to the cathode. Moreover, the interaction between metals and organic matter probably limited metal transportation under the effect of the electric field. Citric acid and ethylenediaminetetraacetic acid (EDTA) were used in the catholyte as complexing agents in order to enhance the extractability and removal of heavy metals from soil. These complexing agents formed negatively charged complexes that migrated towards the anode. The acid front electrogenerated at the anode favored the dissolution of heavy metals that were transported towards the cathode. The combined effect of the soil pH and the complexing agents resulted in the accumulation of heavy metals in the center of the soil specimen.

  18. Phytoremediation of heavy metals--concepts and applications.

    Science.gov (United States)

    Ali, Hazrat; Khan, Ezzat; Sajad, Muhammad Anwar

    2013-05-01

    The mobilization of heavy metals by man through extraction from ores and processing for different applications has led to the release of these elements into the environment. Since heavy metals are nonbiodegradable, they accumulate in the environment and subsequently contaminate the food chain. This contamination poses a risk to environmental and human health. Some heavy metals are carcinogenic, mutagenic, teratogenic and endocrine disruptors while others cause neurological and behavioral changes especially in children. Thus remediation of heavy metal pollution deserves due attention. Different physical and chemical methods used for this purpose suffer from serious limitations like high cost, intensive labor, alteration of soil properties and disturbance of soil native microflora. In contrast, phytoremediation is a better solution to the problem. Phytoremediation is the use of plants and associated soil microbes to reduce the concentrations or toxic effects of contaminants in the environments. It is a relatively recent technology and is perceived as cost-effective, efficient, novel, eco-friendly, and solar-driven technology with good public acceptance. Phytoremediation is an area of active current research. New efficient metal hyperaccumulators are being explored for applications in phytoremediation and phytomining. Molecular tools are being used to better understand the mechanisms of metal uptake, translocation, sequestration and tolerance in plants. This review article comprehensively discusses the background, concepts and future trends in phytoremediation of heavy metals.

  19. Biosurfactant of marine origin exhibiting heavy metal remediation properties.

    Science.gov (United States)

    Das, Palashpriya; Mukherjee, Soumen; Sen, Ramkrishna

    2009-10-01

    The present study was aimed at elucidating the role of biosurfactant product isolated from a marine bacterium in removing heavy metals from heavy metal containing solutions. In this study, metal removal was biosurfactant-mediated. Efficiency of metal removal depended on the concentration of the metal as well as that of the biosurfactant. At a concentration 5x, the critical micelle concentration (CMC), almost complete removal of 100 ppm of lead and cadmium occurred. Atomic absorption spectroscopy (AAS) studies also showed metal removal at a concentration less than the CMC in contrast to earlier findings that only micelles are involved in metal removal. Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) equipped with energy dispersive X-ray spectroscopy (EDS) further substantiated these findings.

  20. Heavy metal adsorption of Streptomyces chromofuscus K101

    Directory of Open Access Journals (Sweden)

    Said Mohamed Daboor

    2014-06-01

    Full Text Available Objective: To find the best actinomycete that has potential application value in the heavy metal remediation due to its special morphological and physiological metabolism. Methods: In some areas of River Nile, Egypt, a total of 67 actinomycete isolates (17 isolates from surface water and 50 from sediment were identified. In addition, the studied area was characterized by a large amount of submerged macrophyte species Ceratophyllum demersum, one free floating species Eichhornia crassipes and two emergent species Polygonum tomentosum and Saccharum spontaneum with the highest biomass production values. Many methods are used in this research like qualitative evaluation of heavy metals, minimum inhibitory concentration of heavy metal determination, metal binding assay, heavy metal assessment, etc. Results: Many actinomycetes isolates were isolated from River Nile, Egypt, the absorbent efficiency of one isolate Streptomyces chromofuscusK101 showed the most efficient metal binding activity. The adsorption process of Zn2+ , Pb2+ and Fe 2+ single or mixture metal ions was investigated, where the order of adsorption potential ( Zn2+ >Pb2+ >Fe 2+ was observed in single metal reaction. The adsorption in mixed metal reactions was the same order as in single-metal ion with a significant decrease in Fe 2+ and Pb2+ adsorption. Conclusions: In conclusion the metal adsorption reactions were very fast, pH dependent and culture age-independent, suggestive of a physicochemical reaction between cell wall components and heavy metal ions. The absorbent removal efficiency was determined as a function of ion concentration, pH and temperature.

  1. Body burdens of heavy metals in Lake Michigan wetland turtles.

    Science.gov (United States)

    Smith, Dayna L; Cooper, Matthew J; Kosiara, Jessica M; Lamberti, Gary A

    2016-02-01

    Tissue heavy metal concentrations in painted (Chrysemys picta) and snapping (Chelydra serpentina) turtles from Lake Michigan coastal wetlands were analyzed to determine (1) whether turtles accumulated heavy metals, (2) if tissue metal concentrations were related to environmental metal concentrations, and (3) the potential for non-lethal sampling techniques to be used for monitoring heavy metal body burdens in freshwater turtles. Muscle, liver, shell, and claw samples were collected from painted and snapping turtles and analyzed for cadmium, chromium, copper, iron, lead, magnesium, manganese, and zinc. Turtle tissues had measurable quantities of all eight metals analyzed. Statistically significant correlations between tissue metal concentrations and sediment metal concentrations were found for a subset of metals. Metals were generally found in higher concentrations in the larger snapping turtles than in painted turtles. In addition, non-lethal samples of shell and claw were found to be possible alternatives to lethal liver and muscle samples for some metals. Human consumption of snapping turtles presents potential health risks if turtles are harvested from contaminated areas. Overall, our results suggest that turtles could be a valuable component of contaminant monitoring programs for wetland ecosystems.

  2. Mechanisms of Selenium Mitigating Stress and Accumulation of Heavy Metals in Plants

    Directory of Open Access Journals (Sweden)

    YUAN Si-li

    2014-12-01

    Full Text Available Selenium (Se plays an important role in improving plant stress resistance, mitigating heavy metal stress and reducing heavy metal uptake. This paper reviewed mechanisms involved with Se for mitigation of heavy metal stress and accumulation. Se could alleviate heavy metals stress because of the combined physiological and biochemical effects of the relevant products, including GSH-Px which could change toxic peroxides to non-toxic substances and remove free radicals induced by heavy metals. Se could activate phytochelatins synthase and increase the amount of precursors to phytochelatin (PC, and make plant produce more PC, and form more heavy metal-PC complexes. The formation of Se-heavy metal complexes reduced the biotoxicity of heavy metals. Se could produce antagonistic effect with a variety of heavy metals, and reduce the uptake of heavy metals.

  3. Nutrients and heavy metal distribution in thermally treated pig manure

    DEFF Research Database (Denmark)

    Kuligowski, Ksawery; Poulsen, Tjalfe G.; Stoholm, Peder

    2008-01-01

    Ash from pig manure treated by combustion and thermal gasification was characterized and compared in terms of nutrient, i.e., potassium (K), phosphorus (P) and heavy metal, i.e., cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) contents. Total nutrient and metal concentrations...

  4. Tolerance and Accumulation of Heavy Metals by Descurainia sophia L.

    Directory of Open Access Journals (Sweden)

    Hoda Karamooz

    2016-01-01

    Full Text Available Today, biosphere pollution has accelerated strongly with start of industrial revolution by toxicity of heavy metals. One of existing pollution is soil pollution. Unfortunately, soil pollution by metals is as intensive environmental stress for plant hence for human. Plants, which are able to store heavy metals in their organs, can be used for phytoremediation of polluted soils and utilization of these plants is effective for phytoremediation as a cheap and economic method. In this research, the absorption rate of Cd (II, Ni (II by Descurainia sophia was considered in hydroponic conditions. Plants were grown in Hoagland media containing different concentrations of Cd (II, Ni (II. An experiment in a completely randomized design with three replications was conducted. Two weeks after treatment of plants the sample were gathered and metal concentration was measured by atomic absorption spectroscopy. Besides, the content of chlorophyll and proline was measured. The results showed the chlorophyll content in high concentrations of the metals (Cd (II, Ni (II was decreased in plants that were sign of pigment degradation in presence of heavy metals. Similarly, the proline content in plants was increased under stress which was sign of damage of heavy metal stress on plant and activation of defensive mechanisms in this condition. The effects of toxic concentration of nickel and cadmium on metal accumulation in these plants showed that roots were able to absorb more than shoots, which is sign of elements connection to root cell wall.

  5. Sorption of Heavy Metal Ions from Mine Wastewater by Activated ...

    African Journals Online (AJOL)

    Michael

    2016-12-02

    Dec 2, 2016 ... tailings disposal, illegal mining, domestic waste disposal and many .... Waste water sample for the test work was collected ..... “Heavy Metal Contamination of Ground. Water”. ... metallurgy, waste management, pyrolysis-gasification of wastes ... of waste polymers in metal extraction processes and recycling.

  6. Biosorption of heavy metals by free and immobilised biomass

    Energy Technology Data Exchange (ETDEWEB)

    Beolchini, F. [Dipartimento di Chimica, Ingegneria Chimica e Materiali, Universita degli studi de L' Aquila (Italy); Pagnanelli, F.; Toro, L. [Dipartimento di Chimica, Facolta di S.M.F.N., Universita degli Studi ' ' La Sapienza' ' , Roma (Italy); Esposito, A.; Veglio, F. [Dipartimento di Ingegneria Chimica e di Processo ' ' G.B. Bonino' ' , Universita degli Studi di Genova, Genova (Albaro) (Italy)

    2000-07-01

    A review of the research activities carried out by the authors on biosorption of heavy metals is reported in this work. In particular, biomass characterisation, biosorption equilibrium with single metal system, biomass immobilisation in polymeric matrix and related kinetics, biosorption in membrane reactor systems are the main aspects reported in the paper. (orig.)

  7. Bioaccumulation of eight heavy metals in cave animals from Dashui ...

    African Journals Online (AJOL)

    ajl2

    Eight heavy metals content in the dominant animal groups, soil and water in Malang and Dashui caves ... Dashui cave is situated in the urban zone of Guiyang City, Guizhou, and Guizhou Aluminum ... cient of a metal in animal suggests higher absorption capacity of ... Pb, As, Cd and Hg, respectively, while the ranking of.

  8. Modelling heavy metal and phosphorus balances for farming systems

    NARCIS (Netherlands)

    Keller, A.N.; Schulin, R.

    2003-01-01

    Accounting for agricultural activities such as P fertilization in regional models of heavy metal accumulation provides suitable sustainable management strategies to reduce nutrient surpluses and metal inputs in agricultural soils. Using the balance model PROTERRA-S, we assessed the phosphorus ( P),

  9. Extractive decontamination of heavy metals from CCA contaminated ...

    African Journals Online (AJOL)

    user

    contaminated soil obtained from a wood treatment factory site by four organic acids are ... that 59% As, 19% Cr and 5% Cu were potentially bio-available and mobile. ... potential industrial source of heavy metals is the wood ... by the European Union, it remains the main chemical ..... metals in soils irrigated with wastewater.

  10. Impact of heavy metals on the female reproductive system

    Directory of Open Access Journals (Sweden)

    Piotr Rzymski

    2015-05-01

    Environmental deterioration can lead to the elevated risk of human exposure to heavy metals, and consequently, health implications including disturbances in reproduction. It is therefore important to continue the investigations on metal-induced mechanisms of fertility impairment on the genetic, epigenetic and biochemical level.

  11. Influence of Agriculture on Water Quality: Significance of Heavy Metals Monitoring

    OpenAIRE

    Nusreta Đonlagić; Amra Odobašić; Amra Bratovčić

    2007-01-01

    Agricultural activities directly influence the quality of water systems. Investigations showed that application of various agro-technical measures results with the pollution of water streams with heavy metals and other polluters. Increased concentrations of heavy metals result with intake of heavy metals and their transfer to food chains, and for that reason it is necessary to monitor the content of heavy metals regularly. Broad investigations of bio-geochemical cycling of heavy metals in the...

  12. Disposable cuvette test for enzymatic determination of heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Wolfbeis, O.S.; Preininger, C. [Karl-Franzens Univ., Graz (Austria). Institute of Organic Chemistry

    1995-12-31

    The authors report on an optical cuvette test for total heavy metals based on the inhibition of the enzyme urease by metals ions including silver(I), mercury(II), copper(II), nickel(II), cobalt(II), and cadmium(II). The enzymatic action is monitored using an optical ammonia transducer deposited on the wall of a disposable cuvette. This results in a rapid and inexpensive single-shot device for heavy metal sensing. A solution of urease and buffer is placed in the cuvette with the ammonium sensor membrane fixed on one of its walls. Enzymatic action starts after addition of a defined quantity of urea. This is indicated by the increase in the absorption of the ammonia sensor membrane whose color changes from yellow to blue. The slope of the increase in signal is the information for the un-inhibited reaction. After several minutes, the sample (containing the heavy metal) is added to the cuvette. Heavy metal ions inhibit the enzyme (by binding to the sulfhydryl groups) and cause a decrease in the slope. The ratio of slopes of un-inhibited and inhibited reactions is a direct parameter for detection and calculation total heavy metals.

  13. Heavy Metals in a Sulfidic Minespoil: Fractions and Column Leaching

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Fractions of various heavy metals in a sulfidic minespoil were investigated. Column leaching experimentwas also conducted to simulate "acid mine drainage" (AMD) from the minespoil. The results show thatleaching of heavy metals from the minespoil was extremely significant during the initial water flushing.The amounts of heavy metals leached out dramatically reduced after leaching twice. It is worthwhile tonote that in this study, Zn, Mn, Fe, As and Ni in the first leachate exceeded the total amount of eachcorresponding water-extractable (1:5, soil:water) metal contained in the minespoil sample. This appears tosuggest that 1:5 water extraction did not allow accurate estimation of water-leachable concentrations of theabove heavy metals. This work has implications for the management of sulfidic minespoils. Acid drainageof great environmental concerns is likely to occur only during heavy rainfall events after substantial solubleand readily exchangeable acid and metals are accumulated in the minespoils. The slow-reacting fractionsother than water-soluble and readily exchangeable fractions may pose little environmental hazards. This isparticularly true for Pb, As and Ni.

  14. Biosorption of heavy metals from wastewater by biosolids

    Energy Technology Data Exchange (ETDEWEB)

    Orhan, Y.; Bueyuekguengoer, H. [Ondokuz Mayis University, Engineering Faculty, Environmental Engineering Department, 55139 Samsun (Turkey); Hrenovic, J. [University of Zagreb, Faculty of Science, Department of Biology, Rooseveltov trg 6, 10000 Zagreb (Croatia)

    2006-08-15

    In a study where the removal of heavy metals from wastewater is the primary aim, the biosorption of heavy metals onto biosolids prepared as Pseudomonas aeruginosa immobilized onto granular activated carbon was investigated in batch and column systems. In the batch system, adsorption equilibriums of heavy metals were reached between 20 and 50 min, and the optimal dosage of biosolids was 0.3 g/L. The biosorption efficiencies were 84, 80, 79, 59 and 42 % for Cr(VI), Ni(II), Cu(II), Zn(II) and Cd(II) ions, respectively. The rate constants of biosorption and pore diffusion of heavy metals were 0.013-0.089 min{sup -1} and 0.026-0.690 min{sup -0.5}. In the column systems, the biosorption efficiencies for all heavy metals increased up to 81-100 %. The affinity of biosorption for various metal ions towards biosolids was decreased in the order: Cr = Ni > Cu > Zn > Cd. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  15. Ecotoxicology of heavy metals: Liquid-phase extraction by nanosorbents

    Science.gov (United States)

    Burakov, A.; Romantsova, I.; Babkin, A.; Neskoromnaya, E.; Kucherova, A.; Kashevich, Z.

    2015-11-01

    The paper considers the problem of extreme toxicity heavy metal compounds dissolved in wastewater and liquid emissions of industrial enterprises to living organisms and environment as a whole. The possibility of increasing extraction efficiency of heavy metal ions by sorption materials was demonstrated. The porous space of the latter was modified by carbon nanotubes (CNTs) during process of the chemical vapour deposition (CVD) of carbon on metal oxide catalysts. The increasing of the sorption capacity (10-30%) and the sorption rate of nanomodified activated carbons in comparison with standard materials in the example of absorption of Co2+ and Ni2+ ions from aqueous solutions was proven.

  16. Mosses accumulate heavy metals from the substrata of coal ash

    Directory of Open Access Journals (Sweden)

    Vukojević Vanja

    2005-01-01

    Full Text Available Plants that are able to accumulate and tolerate extraordinarily high concentrations of heavy metals (hyperaccumulators can be used for phytoremediation (removal of contaminants from soils or phytomining (growing a crop of plants to harvest the metals. Two moss species, Bryum capillare Hedw. and Ceratodon purpureus Hedw., were tested as potential phytoremedies under in vivo conditions on a coal ash disposal site in the surroundings of Obrenovac (NW Serbia. The content of various heavy metals (iron, manganese zinc, lead, nickel, cadmium, and copper in the mosses and substrata were investigated over a period of three years. Iron and zinc were found to have the highest concentration in the mosses.

  17. Synthesis and Characteristics of A Novel Heavy Metal Ions Chelator

    Institute of Scientific and Technical Information of China (English)

    LIU Zhuannian; SONG Yejing; HAN Xiaogang

    2012-01-01

    Polyacrylamide-urea-sulfanilamide(PUS) was prepared as a novel heavy metal ions chelator and successfully used to simultaneously remove heavy metals from wastewater effluents.The effects of reaction parameters (sodium hydroxide,material ratio,temprature and contact time) were monitored to specify the best synthesis conditions.PUS was chemically characterized by means of infrared spectroscopy (FTIR) and ultraviolet-visible (UV-Vis).The simultaneous chelation performance of PUS towards selected heavy metals ions,Ni2+,Cu2+,Pb2+,Zn2+,Cd2+ was discussed,showing that Ni2+,Cu2+,Pb2+,Zn2+ could be better chelated.It is indicated that the synthesized PUS is a potential remediation material when used for the treatment of wastewater containing metal ions.

  18. Predatory insects as bioindicators of heavy metal pollution

    Energy Technology Data Exchange (ETDEWEB)

    Nummelin, Matti [Department of Biological and Environmental Sciences, P.O. Box 65, University of Helsinki, FIN-00014 (Finland)]. E-mail: matti.nummelin@helsinki.fi; Lodenius, Martin [Department of Biological and Environmental Sciences, P.O. Box 65, University of Helsinki, FIN-00014 (Finland); Tulisalo, Esa [Department of Biological and Environmental Sciences, P.O. Box 65, University of Helsinki, FIN-00014 (Finland); Hirvonen, Heikki [Department of Biological and Environmental Sciences, P.O. Box 65, University of Helsinki, FIN-00014 (Finland); Alanko, Timo [Statistics Finland, FIN-00022 (Finland)

    2007-01-15

    Heavy metal concentrations of different predatory insects were studied near by a steel factory and from control sites. Waterstriders (Gerridae), dragon fly larvae (Odonata), antlion larvae (Myrmeleontidae) and ants (Formicidae) were analyzed by AAS. In most cases the metal concentrations were higher near the factory, but e.g. waterstriders had higher cadmium concentrations in control area. Discriminant analysis clearly reveals that all these insect groups can be used as heavy metal indicators. However, the commonly used ants were the least effective in indicating the differences between the factory and control sites. Waterstriders are good in detecting differences in iron and manganese, but seem to be poor in accumulating nickel and lead. Antlions are efficient in detecting differences in iron. Antlions and ants are effective in accumulating manganese; as well antlions are efficient in accumulating cadmium. Waterstriders are poor in accumulating lead, but antlions and ants are effective. - Waterstriders, dragon fly larvae, antlion larvae, and ants can be used as heavy metal indicators.

  19. Preparation of Dithizone Functionalized Polystyrene for Detecting Heavy Metal Ion

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Hyeon Ho; Kim, Younghun [Kwangwoon University, Seoul (Korea, Republic of)

    2015-04-15

    Colorimetric sensors were usually used to detect specific metal ions using selective color change of solutions. While almost organic dye in colorimetric sensors detected single molecule, dithizone (DTZ) solution could be separately detected above 5 kinds of heavy metal ions by the change of clear color. Namely, DTZ could be used as multicolorimetric sensors. However, DTZ was generally used as aqueous type and paper/pellet-type DTZ was not reported yet. Therefore, in this work, polystyrene (PS) was prepared to composite with DTZ and then DTZ/PS pellet was obtained, which was used to selectively detect 10 kinds of heavy metal ions. When 10 ppm of Hg and Co ions was exposed in DTZ/PS pellets, clear color change was revealed. It is noted that DTZ/PS pellet could be used in detecting of heavy metal ion as dry type.

  20. Characterization of polycyclic aromatic hydrocarbons and metals in ashes released from a forest fire

    Science.gov (United States)

    Campos, I.; Abrantes, N.; Pereira, P.; Vale, C.; Ferreira, A.; Keizer, J. J.

    2012-04-01

    Wildfires have become a permanent source of environmental and societal concerns. Whilst the impacts of wildfire on hydrological and erosion processes are well documented, the stocks and export of polycyclic aromatic hydrocarbons (PAHs) and heavy metals have received considerably less research attention. The ashes produced by wildfires, which include polluting substances such as PAHs and metals, are subject to transport processes by wind and especially by overland flow and water infiltrating into the soil and possibly reaching ground water bodies. In the framework of the FIRECNUTS project, we are studying the stocks of PAHs and selected metals in recently burnt forest stands in north-central Portugal, and their subsequent export by overland flow. The present work, however, will focus on the stocks in the ashes, both immediately after wildfire and three months later. These ashes were collected at two burnt slopes with contrasting forest types, i.e. a eucalypt and a maritime pine stand, the two pre-dominant forest types in the study region. The sixteen PAHs identified by US EPA as priority contaminants were analysed by gas chromatograph, after extraction and column clean up. The contents of vanadium (V), chromium (Cr), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd) and lead (Pb) were analysed by inductively coupled plasma- mass spectrometry (ICP-MS), after an acid digestion, while mercury (Hg) was analysed by pyrolysis atomic absorption spectrometry with gold amalgamation. The total concentration of PAHs immediately after the wildfire ranged from 314 ng/g dry weight in the maritime pine stand to 597 ng/g dry weight in the eucalypt stand. Three months later, the total concentration has decreased with 33% in the pine stand but only half (16%) in the eucalypt stand. The composition the PAHs by ring size was dominated by three-rings PAHs. This was true for all samples. The concentrations of various metals differed for the two sampling

  1. Critical loads of heavy metals for soils

    NARCIS (Netherlands)

    Vries, de W.; Groenenberg, J.E.; Lofts, S.; Tipping, E.; Posch, M.

    2012-01-01

    To enable a precautionary risk assessment for future inputs of metals, steady-state methods have been developed to assess critical loads of metals avoiding long-term risks to food quality and eco-toxicological effects on organisms in soils and surface waters. A critical load for metals equals the lo

  2. Assessment of heavy metal residues in water, fish tissue and human ...

    African Journals Online (AJOL)

    MICHAEL HORSFALL

    Key Words : Heavy metal residues , Fish tissue, Human blood, Ubeji River. ... essential metals have been found to be toxic when ... Heavy metal contamination of aquatic environments ... higher organisms, during feeding may incorporate.

  3. Heavy Metals in ToxCast: Relevance to Food Safety (SOT)

    Science.gov (United States)

    Human exposure to heavy metals occurs through food contamination due to industrial processes, vehicle emissions and farming methods. Specific toxicity endpoints have been associated with metal exposures, e.g. lead and neurotoxicity; however, numerous varieties of heavy metals hav...

  4. Heavy Metal Bioaccumulation and Toxicity with Special Reference to Microalgae

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The bioaccumulation and toxicity of heavy metals were reviewed with special reference to microalgae, the key component of the food web in aquatic ecosystems. Heavy metals enter algal cells either by means of active transport or by endocytosis through chelating proteins and affect various physiological and biochemical processes of the algae. The toxicity primarily results from their binding to the sulphydryl groups in proteins or disrupting protein structure or displacing essential elements. Metals can break the oxidative balance of the algae, inducing antioxidant enzymes, such as superoxide dismutase (SOD), glutathione peroxidase (GPX) and ascorbate peroxidase (APX). The amount of oxidized proteins and lipids in the algal cells thus indicates the severity of the stress. Algal tolerance to heavy metal is highly dependent upon the defense response against the probable oxidative damages. Production of binding factors and proteins, exclusion of metals from cells by ion-selective transporters and excretion or compartmentalization have been suggested with regard to reducing heavy metal toxicity. However, a comprehensive description on the mechanisms underlining metal toxicity of microalgae and gaining tolerance is yet to be elaborated.

  5. DETERMINATION OF SOLID-LIQUID EQUILIBRIA DATA FOR MIXTURES OF HEAVY HYDROCARBONS IN A LIGHT SOLVENT

    Energy Technology Data Exchange (ETDEWEB)

    F.V. Hanson; J.V. Fletcher; Karthik R.

    2003-06-01

    A methodology was developed using an FT-IR spectroscopic technique to obtain solid-liquid equilibria (SLE) data for mixtures of heavy hydrocarbons in significantly lighter hydrocarbon diluents. SLE was examined in multiple Model Oils that were assembled to simulate waxes. The various Model oils were comprised of C-30 to C-44 hydrocarbons in decane. The FT-IR technique was used to identify the wax precipitation temperature (WPT). The DSC technique was also used in the identification of the onset of the two-phase equilibrium in this work. An additional Model oil made up of C-20 to C-30 hydrocarbons in decane was studied using the DSC experiment. The weight percent solid below the WPT was calculated using the FT-IR experimental results. The WPT and the weight percent solid below the WPT were predicted using an activity coefficient based thermodynamic model. The FT-IR spectroscopy method is found to successfully provide SLE data and also has several advantages over other laboratory-based methods.

  6. Isolation and characterization of heavy polycyclic aromatic hydrocarbon-degrading bacteria adapted to electrokinetic conditions.

    Science.gov (United States)

    Li, Fengmei; Guo, Shuhai; Hartog, Niels; Yuan, Ye; Yang, Xuelian

    2016-02-01

    Polycyclic aromatic hydrocarbon (PAH)-degrading bacteria capable of growing under electrokinetic conditions were isolated using an adjusted acclimation and enrichment procedure based on soil contaminated with heavy PAHs in the presence of an electric field. Their ability to degrade heavy PAHs under an electric field was individually investigated in artificially contaminated soils. The results showed that strains PB4 (Pseudomonas fluorescens) and FB6 (Kocuria sp.) were the most efficient heavy PAH degraders under electrokinetic conditions. They were re-inoculated into a polluted soil from an industrial site with a PAH concentration of 184.95 mg kg(-1). Compared to the experiments without an electric field, the degradation capability of Pseudomonas fluorescens and Kocuria sp. was enhanced in the industrially polluted soil under electrokinetic conditions. The degradation extents of total PAHs were increased by 15.4 and 14.0% in the electrokinetic PB4 and FB6 experiments (PB4 + EK and FB6 + EK) relative to the PB4 and FB6 experiments without electrokinetic conditions (PB4 and FB6), respectively. These results indicated that P. fluorescens and Kocuria sp. could efficiently degrade heavy PAHs under electrokinetic conditions and have the potential to be used for the electro-bioremediation of PAH-contaminated soil, especially if the soil is contaminated with heavy PAHs.

  7. Heavy metal accumulation by carrageenan and agar producing algae

    Energy Technology Data Exchange (ETDEWEB)

    Burdin, K.S. [Moscow State Univ. (Russian Federation). Faculty of Biology; Bird, K.T. [North Carolina Univ., Wilmington, NC (United States). Center for Marine Science Research

    1994-09-01

    The accumulation of six heavy metals Cu, Cd, Ni, Zn, Mn and Pb was measured in living and lzophilized algal thalli. The agar producing algae were Gracilaria tikvahiae and Gelidium pusillum. The carrageenan producing macroalgae were Agardhiella subulata and the gametophyte and tetrasporophyte phases of Chondrus crispus. These produce primarily iota, kappa and lambda carrageenans, respectively. At heavy metal concentrations of 0.5 mg L{sup -1}, living thalli of Gracilaria tikvahiae generally showed the greatest amount of accumulation of the 6 heavy metals tested. The accumulation of Pb was greater in the living thalli of all four species than in the lyophilized thalli. Except for Agardhiella subulata, lyophilized thalli showed greater accumulation of Ni, Cu and Zn. There was no difference in heavy metal accumulation between living and lyophilized thalli in the accumulation of Cd. Manganese showed no accumulation at the tested concentration. There did not appear to be a relationship between algal hydrocolloid characteristics and the amounts of heavy metals accumulated. (orig.)

  8. Thermal treatment of harzardous waste for heavy metal recovery.

    Science.gov (United States)

    Hoffmann, Gaston; Schirmer, Matthias; Bilitewski, Bernd; Kaszás Savos, Melania

    2007-07-16

    In this study, a new method for recovering heavy metals from hazardous waste is introduced. The process is characterized by a separation of heavy metals and residues during the thermal treatment under a sub-stoichiometric atmosphere in a rotary kiln. After leaving the rotary kiln the separated heavy metals are precipitated in a hot gas ceramic filter. Using this technology, hazardous materials, both liquids and pasty hazardous waste containing heavy metals, can be treated and a product with a quasi-raw material condition can be formed. In contrast to current methods,the harmful substances should not be immobilized and disposed. In fact, a saleable product highly concentrated with heavy metals should be formed. During preliminary investigations with a solution containing sodium chromate tetrahydrate, the process was tested in a pilot plant. Here,the separation of chromium could be demonstrated with leaching tests and characterization of the filter dust. Analysis concerning the disposability of the residues had not been carried out because only the process and the characteristic of the filter dust were in the centre of attention.

  9. SPECIATION OF HEAVY METALS AT WATER-SEDIMENT INTERFACE

    Directory of Open Access Journals (Sweden)

    Chiara Ferronato

    2013-09-01

    Full Text Available The objective of the study was to understand the equilibrium relationship between the heavy metals concentrations in superficial water and pore water. At  water-sediment interface, the equilibrium rapidly changed and it is influenced by chemico-physical parameters of aquatic ecosystems. The hydraulic safety of Bologna plain (North Italy depends on network of artificial canals and they are related with natural rivers of Reno basin (Reno river and its tributaries. The natural and artificial water courses flowed in agricultural, urban and industrial land. The heavy metals concentration in water and sediment discriminated the human pressure on the land and their spatial distribution in sediment could predict the hazard of pollution in aquatic ecosystems. We compared the heavy metals concentrations in pore water and superficial water determined in natural rivers and artificial canals, and more pollution in artificial canals than natural rivers was found. Furthermore, the coefficient of partition (log Kd between water and sediments was calculated to evaluate the bioavailability of heavy metals adsorbed on the sediments. The heavy metals extracted in deionised water at equilibrium after 16 h showed higher concentrations than those determined directly on water samples.

  10. HEAVY METALS CONTENT IN SHEEP PRODUCTS FROM MIDLE SPIŠ

    Directory of Open Access Journals (Sweden)

    Slávik Marek

    2015-02-01

    Full Text Available In this work, we evaluated the risk of contamination of animal products by heavy metals. Samples of animal raw materials were obtained in 2013 in the municipalities of Porac and Matejovce nad Hornádom. Samples of muscle and internal organs were collected from domestic sheep (Ovis aries reared in the village of Rudnianska burdened area where mercury along with other heavy metals contamination is above the limit value of agricultural soil. Measuring the concentration of heavy metals in the samples was performed in accordance with the general requirements set out in the tenth chapter of the Food Code of the Slovak Republic. Mercury content in biological materials were assessed by total mercury as on the AMA 254 in fresh samples. The other heavy metal content, was determined after wet mineralization (HNO3: H2O - 1: 1 using the device AAS Varian 240 FS. The contamination of the environment showed increased accumulation of heavy metals in the - studiet sheep tissues intended for consumption. Such as Hg content in the kidneys of domestic sheep exceed the limit value by 1.3 times, whereas, in the case of cadmium 3 times exceeding the limit value in meat was recordered. Exceed limit was recorded in the case of lead and copper in the liver.

  11. [Immobilization impact of different fixatives on heavy metals contaminated soil].

    Science.gov (United States)

    Wu, Lie-shan; Zeng, Dong-mei; Mo, Xiao-rong; Lu, Hong-hong; Su, Cui-cui; Kong, De-chao

    2015-01-01

    Four kinds of amendments including humus, ammonium sulfate, lime, superphosphate and their complex combination were added to rapid immobilize the heavy metals in contaminated soils. The best material was chosen according to the heavy metals' immobilization efficiency and the Capacity Values of the fixative in stabilizing soil heavy metals. The redistributions of heavy metals were determined by the European Communities Bureau of Referent(BCR) fraction distribution experiment before and after treatment. The results were as follows: (1) In the single material treatment, lime worked best with the dosage of 2% compared to the control group. In the compound amendment treatments, 2% humus combined with 2% lime worked best, and the immobilization efficiency of Pb, Cu, Cd, Zn reached 98.49%, 99.40%, 95.86%, 99.21%, respectively. (2) The order of Capacity Values was lime > humus + lime > ammonium sulfate + lime > superphosphate > ammonium sulfate + superphosphate > humus + superphosphate > humus > superphosphate. (3) BCR sequential extraction procedure results indicated that 2% humus combined with 2% lime treatment were very effective in immobilizing heavy metals, better than 2% lime treatment alone. Besides, Cd was activated firstly by 2% humus treatment then it could be easily changed into the organic fraction and residual fraction after the subsequent addition of 2% lime.

  12. Heavy metal contamination in the Western Indian Ocean (a review)

    Science.gov (United States)

    Mamboya, F. A.; Pratap, H. B.; Björk, M.

    2003-05-01

    Western Indian Ocean Coast has many potential marine ecosystems such as mangrove, seagrass meadows, macroalgae, and coral reefs. It is largely unspoiled environment however, tourism and population growth in coastal urban centres, industrialization, are presenting a risk of pollutants input to the marine environment of the Western Indian Ocean. Mining, shipping and agricultural activities also input contaminants into the marine environment via runoff, vessel operations and accidental spillage. Heavy metals are among the pollutants that are expected to increase in the marine environment of the Western Indian Ocean. The increase in heavy metal pollution can pose a serious health problem to marine organism and human through food chain. This paper reviews studies on heavy metal contamination in the Western Indian Ocean. It covers heavy metal studies in the sediments, biota, particulates and seawater collected in different sites. In comparison to other regions, only few studies have been conducted in the Western Indian Ocean and are localized in some certain areas. Most of these studies were conducted in Kenyan and Tanzanian coasts while few of them were conducted in Mauritius, Somalia and Reunion. No standard or common method has been reported for the analysis or monitoring of heavy metals in the Western Indian Ocean.

  13. Microorganisms in heavy metal bioremediation: strategies for applying microbial-community engineering to remediate soils

    OpenAIRE

    Jennifer L. Wood; Caixian Tang; Franks, Ashley E.; Wuxing Liu

    2016-01-01

    The remediation of heavy-metal-contaminated soils is essential as heavy metals persist and do not degrade in the environment. Remediating heavy-metal-contaminated soils requires metals to be mobilized for extraction whilst, at the same time, employing strategies to avoid mobilized metals leaching into ground-water or aquatic systems. Phytoextraction is a bioremediation strategy that extracts heavy metals from soils by sequestration in plant tissues and is currently the predominant bioremediat...

  14. Cocoa shells for heavy metal removal from acidic solutions.

    Science.gov (United States)

    Meunier, N; Laroulandie, J; Blais, J F; Tyagi, R D

    2003-12-01

    The development of economic and efficient processes for the removal of heavy metals present in acidic effluents from industrial sources or decontamination technologies has become a priority. The purpose of this work was to study the efficiency with which cocoa shells remove heavy metals from acidic solutions (pH 2) and to investigate how the composition of these solutions influences heavy metal uptake efficiency. Adsorption tests were conducted in agitated flasks with single-metal solutions (0.25 mM Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn), multi-metal solution (comprised of 0.25 mM of each of the cations above) and an effluent obtained from chemical leaching of metal-contaminated soil, in the presence of different cocoa shell concentrations (5-40 g/l). Results from the single-metal solution assays indicated that the fixation capacity of heavy metals by cocoa shells followed a specific order: Pb>Cr>Cd=Cu=Fe>Zn=Co>Mn=Ni=Al. Cocoa shells are particularly efficient in the removal of lead from very acidic solutions (q(max)=6.2 mg Pb/g, pH(i)=2.0 and T=22 degrees C). The presence of other metals and cations in solution did not seem to affect the recovery of lead. It was also observed that the maximum metal uptake was reached in less than 2 h. This research has also demonstrated that the removal of metals caused a decline in solution proton concentration (pH increase) and release of calcium, magnesium, potassium and sodium from the cocoa shells.

  15. Heavy Metal Exposure Influences Double Strand Break DNA Repair Outcomes.

    Directory of Open Access Journals (Sweden)

    Maria E Morales

    Full Text Available Heavy metals such as cadmium, arsenic and nickel are classified as carcinogens. Although the precise mechanism of carcinogenesis is undefined, heavy metal exposure can contribute to genetic damage by inducing double strand breaks (DSBs as well as inhibiting critical proteins from different DNA repair pathways. Here we take advantage of two previously published culture assay systems developed to address mechanistic aspects of DNA repair to evaluate the effects of heavy metal exposures on competing DNA repair outcomes. Our results demonstrate that exposure to heavy metals significantly alters how cells repair double strand breaks. The effects observed are both specific to the particular metal and dose dependent. Low doses of NiCl2 favored resolution of DSBs through homologous recombination (HR and single strand annealing (SSA, which were inhibited by higher NiCl2 doses. In contrast, cells exposed to arsenic trioxide preferentially repaired using the "error prone" non-homologous end joining (alt-NHEJ while inhibiting repair by HR. In addition, we determined that low doses of nickel and cadmium contributed to an increase in mutagenic recombination-mediated by Alu elements, the most numerous family of repetitive elements in humans. Sequence verification confirmed that the majority of the genetic deletions were the result of Alu-mediated non-allelic recombination events that predominantly arose from repair by SSA. All heavy metals showed a shift in the outcomes of alt-NHEJ repair with a significant increase of non-templated sequence insertions at the DSB repair site. Our data suggest that exposure to heavy metals will alter the choice of DNA repair pathway changing the genetic outcome of DSBs repair.

  16. Removal of heavy metals from synthetic solution by electrocoagulation

    Directory of Open Access Journals (Sweden)

    Mohamed Ilou

    2016-05-01

    Full Text Available The objective of this work concerns the optimization of the operating conditions for the removal of heavy metals from synthetic solution by Electrocoagulation (EC. To reach this purpose, we prepared a synthetic wastewater containing certain heavy metals (Ni, Cu, Zn, Fe and Pb to study the influence of various parameters (conductivity, pH, time of electrolysis, current density and the initial concentration of the metal on the rate of removal of these metals. The results show that this rate of removal can reach 99.9 % in the following optimal conditions: pH included between 6 and 8 and a density of the current of 1~1.5A / dm2. This study shows that it is possible to remove metals in aqueous solution by the technique of electrocoagulation. 

  17. Volatilization of heavy metals during incineration of municipal solid wastes

    Institute of Scientific and Technical Information of China (English)

    SUN Lu-shi; S. Abanades; J.D.Lu; G.Flamant; D.Gauthier

    2004-01-01

    Incineration experiments with MSW, which had been impregnated with heavy metals, were presented toobtain information on the volatilization behavior of the elements cadmium (Cd), lead (Pb), and zinc (Zn) underdifferent conditions. Experiments were carried out in a bubbling fluid bed system connected to a customizedinductively coupled plasma optical emission spectroscopy(ICP-OES) for analyzing metals in the flue gas. The resultsindicated that the combustion temperature, the gas atmosphere, and the chlorine content in the flue gas could affectthe volatilization behavior of heavy metals. In the fluidized bed combustion, a large surface area was provided by thebed sand particles, and they may act as absorbents for the gaseous ash-forming compound. Comparer with themetals Cd and Pb, the vaporization of Zn was Iow. The formation of stable compounds such as ZnO·Al2O3 couldgreatly decrease the metals volatilization. The presence of chlorine would enhance the volatilization of heavy metalsby increasing the formation of metal chlorides. However, when the oxygen content was high, the chlorinatingreaction was kinetically hindered, which heavy metals release would be delayed.

  18. Beneficial effect of sesame oil on heavy metal toxicity.

    Science.gov (United States)

    Chandrasekaran, Victor Raj Mohan; Hsu, Dur-Zong; Liu, Ming-Yie

    2014-02-01

    Heavy metals become toxic when they are not metabolized by the body and accumulate in the soft tissue. Chelation therapy is mainly for the management of heavy metal-induced toxicity; however, it usually causes adverse effects or completely blocks the vital function of the particular metal chelated. Much attention has been paid to the development of chelating agents from natural sources to counteract lead- and iron-induced hepatic and renal damage. Sesame oil (a natural edible oil) and sesamol (an active antioxidant) are potently beneficial for treating lead- and iron-induced hepatic and renal toxicity and have no adverse effects. Sesame oil and sesamol significantly inhibit iron-induced lipid peroxidation by inhibiting the xanthine oxidase, nitric oxide, superoxide anion, and hydroxyl radical generation. In addition, sesame oil is a potent inhibitor of proinflammatory mediators, and it attenuates lead-induced hepatic damage by inhibiting nitric oxide, tumor necrosis factor-α, and interleukin-1β levels. Because metal chelating therapy is associated with adverse effects, treating heavy metal toxicity in addition with sesame oil and sesamol may be better alternatives. This review deals with the possible use and beneficial effects of sesame oil and sesamol during heavy metal toxicity treatment.

  19. The environmental impact of gold mines: pollution by heavy metals

    Science.gov (United States)

    Abdul-Wahab, Sabah; Marikar, Fouzul

    2012-06-01

    The gold mining plant of Oman was studied to assess the contribution of gold mining on the degree of heavy metals into different environmental media. Samples were collected from the gold mining plant area in tailings, stream waters, soils and crop plants. The collected samples were analyzed for 13 heavy metals including vanadium (V), chromium (Cr), manganese (Mn), nickel (Ni), copper (Cu), cadmium (Cd), cobalt (Co), lead (Pb), zinc (Zn), aluminium (Al), strontium (Sr), iron (Fe) and barium (Ba). The water in the acid evaporation pond showed a high concentration of Fe as well as residual quantities of Zn, V, and Al, whereas water from the citizens well showed concentrations of Al above those of Omani and WHO standards. The desert plant species growing closed to the gold pit indicated high concentrations of heavy metals (Mn, Al, Ni, Fe, Cr, and V), while the similar plant species used as a control indicated lesser concentrations of all heavy metals. The surface water (blue) indicated very high concentrations of copper and significant concentrations of Mn, Ni, Al, Fe, Zn, lead, Co and Cd. The results revealed that some of the toxic metals absorbed by plants indicated significant metal immobilization.

  20. Process for simultaneously processing of used metal and/or metal scrap and scrap containing halogenated hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Dapper, G.; Kirchner, W.; Sloterdijk, W.; Verbraak, C.A.

    1982-03-02

    A process is presened for reducing environmental pollution resulting from disposal of waste containing halogenated hydrocarbons by simultaneous treatment with used metal and/or metal scrap at elevated temperatures. The halogenated hydrocarbons are pyrolyzed and the resulting hydrogen halide containing gas is brought into contact with the used metal and/or metal scrap at elevated temperatures so as to form metal halogenides that are volatile under the conditions applied. The volatile metal halogenides are largely separated from the gaseous mixture formed, and at least part of the remaining gaseous mixture and/or hydrocarbon residue is used as fuel to maintain the required temperature. The waste feed compositions and process conditions can be chosen to effect separation between various metals by selective halogenation and condensation, and substantially all of the hydrogen halide can be tied up and recovered as metal halogenides.

  1. Heavy metals and TPH effects on microbial abundance and diversity in two estuarine areas of the southern-central coast of São Paulo State, Brazil.

    Science.gov (United States)

    Pinto, Aline Bartelochi; Pagnocca, Fernando Carlos; Pinheiro, Marcelo Antonio Amaro; Fontes, Roberto Fioravanti Carelli; de Oliveira, Ana Júlia Fernandes Cardoso

    2015-07-15

    Coastal areas may be impacted by human and industrial activities, including contamination by wastewater, heavy metals and hydrocarbons. This study aimed to evaluate the impact of hydrocarbons (TPH) and metals on the microbiota composition and abundance in two estuarine systems in the coast of São Paulo: the Santos (SE) and Itanhaém (IE) estuaries. The SE was found to be chronically contaminated by heavy metals and highly contaminated by hydrocarbons. This finding was correlated with the increased density of cyanobacteria in sediments and suggests the possible use of cyanobacteria for bioremediation. These contaminants influence the density and composition of estuarine microbiota that respond to stress caused by human activity. The results are troubling because quantitative and qualitative changes in the microbiota of estuarine sediments may alter microbiological processes such as decomposition of organic matter. Moreover, this pollution can result in damage to the environment, biota and human health.

  2. Dustfall Heavy Metal Pollution During Winter in North China.

    Science.gov (United States)

    Xiong, Qiu-lin; Zhao, Wen-ji; Guo, Xiao-yu; Shu, Tong-tong; Chen, Fan-tao; Zheng, Xiao-xia; Gong, Zhao-ning

    2015-10-01

    In order to study heavy metal pollution in dustfall during Winter in North China, forty-four dustfall samples were collected in North China Region from November 2013 to March 2014. Then forty trace elements content were measured for each sample by inductively coupled plasma-mass spectrometry. Finally, the contamination characteristics of the main heavy metals were studied through a multi-method analysis, including variability analysis, Pearson correlation analysis and principal component analysis. Results showed that the relative contents of cadmium (Cd), zinc (Zn), copper (Cu), bismuth (Bi), lead (Pb) exceeded the standards stipulated in Chinese soil elements background values by amazing 4.9 times. In this study, conclusions were drawn that dustfall heavy metal pollution in the region was mainly caused by transport pollution, metallurgy industrial pollution, coal pollution and steel industrial pollution.

  3. Effect of Heavy Metals in Plants of the Genus Brassica

    Science.gov (United States)

    Mourato, Miguel P.; Moreira, Inês N.; Leitão, Inês; Pinto, Filipa R.; Sales, Joana R.; Louro Martins, Luisa

    2015-01-01

    Several species from the Brassica genus are very important agricultural crops in different parts of the world and are also known to be heavy metal accumulators. There have been a large number of studies regarding the tolerance, uptake and defense mechanism in several of these species, notably Brassica juncea and B. napus, against the stress induced by heavy metals. Numerous studies have also been published about the capacity of these species to be used for phytoremediation purposes but with mixed results. This review will focus on the latest developments in the study of the uptake capacity, oxidative damage and biochemical and physiological tolerance and defense mechanisms to heavy metal toxicity on six economically important species: B. juncea, B. napus, B. oleracea, B. carinata, B. rapa and B. nigra. PMID:26247945

  4. Electrodialytic Removal of Heavy Metals from Different Solid Waste Products

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben Vernegren; Pedersen, Anne Juul;

    2003-01-01

    that the method could be used for removal of different heavy metals from impregnated wood waste, fly ash from straw combustion, and fly ash from municipal solid waste incineration. The best result was obtained with the wood waste where more than 80% of each of the polluting elements Cu, Cr and As was removed......A variety of heavy metal polluted waste products must be handled today. Electrochemical methods have been developed for remediation of polluted soil. One of the methods is the electrodialytic remediation method that is based on electromigration of heavy metal ions and ionic species within the soil...... could be used when removing Cu and Cr from a soil with 25% carbonates. The final concentrations of the elements were below the target values after the remediation. A question of whether the electrodialytic remediation method can be used for other waste products arose. Preliminary experiments showed...

  5. Deena Weinstein, Heavy Metal: The Music and Its Culture

    OpenAIRE

    Grassy, Elsa

    2009-01-01

    Au moment où la sociologue Deena Weinstein publie Heavy Metal : The Music and Its Culture, en 1991, le heavy metal fait l’objet de controverses très médiatisées aux États-Unis. Le procès de Judas Priest pour incitation au suicide vient de faire les gros titres, et tous les conservateurs du pays passent leurs journées à écouter des disques à l’envers, à la recherche de paroles sataniques. Le livre de Weinstein s’inspire de ce climat sulfureux qui entoure le heavy metal depuis ses débuts mais a...

  6. BIOACCUMULATION OF HEAVY METALS BY BACILLUS MEGATERIUM FROM PHOSPHOGYPSUM WASTE

    Directory of Open Access Journals (Sweden)

    IOANA ADRIANA STEFANESCU

    2015-05-01

    Full Text Available The aim of present study was to characterize the bioaccumulation capacity of heavy metals by Bacillus megaterium from phosphogypsum waste. The Bacillus megaterium strain (BM30 was isolated from soil near the phosphogypsum (PG dump. For the bioaccumulation quantification produced by BM30 strain were used three experimental treatments respectively with 2, 6 and 10 gL-1 PG. Cellular biomass samples were collected punctually at ages corresponding to the three stages of the development cycle of the microorganism: exponential phase, stationary phase and decline phase and the heavy metals concentrations were measured by atomic absorption spectroscopy. The bioaccumulation yields in cell biomass, relative to the total amount of analyte introduced in the reaction medium were between 20 - 80 %, the lowest value was recorded by Cu and highest by Mn. The study results indicated that the isolated strain near the dump PG, BM30, bioaccumulate heavy metals monitored in cell biomass in the order Cu > Fe > Zn = Mn.

  7. Effect of Heavy Metals in Plants of the Genus Brassica

    Directory of Open Access Journals (Sweden)

    Miguel P. Mourato

    2015-08-01

    Full Text Available Several species from the Brassica genus are very important agricultural crops in different parts of the world and are also known to be heavy metal accumulators. There have been a large number of studies regarding the tolerance, uptake and defense mechanism in several of these species, notably Brassica juncea and B. napus, against the stress induced by heavy metals. Numerous studies have also been published about the capacity of these species to be used for phytoremediation purposes but with mixed results. This review will focus on the latest developments in the study of the uptake capacity, oxidative damage and biochemical and physiological tolerance and defense mechanisms to heavy metal toxicity on six economically important species: B. juncea, B. napus, B. oleracea, B. carinata, B. rapa and B. nigra.

  8. Heavy metals intake by cultured mushrooms growing in model system.

    Science.gov (United States)

    Ozcan, Mehmet Musa; Dursun, Nesim; Al Juhaimi, Fahad Y

    2013-10-01

    Micro element and heavy metal contents of mushrooms were determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). It was seen an increase in the heavy metal contents (except Cu and Zn) of the mushrooms until the second dose. A decrease was seen in heavy metal intake of the mushroom in the application of the third dose. The highest accumulation occurred from the upper soils treated with the second dose. Amounts of Cd, Cr, Cu, Pb and Zn, which were accumulated in the mushroom after the application of this dose, were detected as 5.7, 23.1, 75.7, 62.8 and 99.3 ppm, respectively.

  9. Heavy metal biosorption by bacterial cells

    NARCIS (Netherlands)

    Vecchio, A; Finoli, C; Di Simine, D; Andreoni, [No Value

    1998-01-01

    Microbial biomass provides available ligand groups on which metal ions bind by different mechanisms. Biosorption of these elements from aqueous solutions represents a remediation technology suitable for the treatment of metal-contaminated effluents. The purpose of the present investigation was the a

  10. Characterization of a heavy metal translocating P-type ATPase gene from an environmental heavy metal resistance Enterobacter sp. isolate.

    Science.gov (United States)

    Chien, Chih-Ching; Huang, Chia-Hsuan; Lin, Yi-Wei

    2013-03-01

    Heavy metals are common contaminants found in polluted areas. We have identified a heavy metal translocating P-type ATPase gene (hmtp) via fosmid library and in vitro transposon mutagenesis from an Enterobacter sp. isolate. This gene is believed to participate in the bacterium's heavy metal resistance traits. The complete gene was identified, cloned, and expressed in a suitable Escherichia coli host cell. E. coli W3110, RW3110 (zntA::Km), GG48 (ΔzitB::Cm zntA::Km), and GG51 (ΔzitB::Cm) were used to study the possible effects of this gene for heavy metal (cadmium and zinc in particular) resistance. Among the E. coli strains tested, RW3110 and GG48 showed more sensitivity to cadmium and zinc compared to the wild-type E. coli W3110 and strain GG51. Therefore, strains RW3110 and GG48 were chosen for the reference hosts for further evaluation of the gene's effect. The results showed that expression of this heavy metal translocating P-type ATPase gene could increase the ability for zinc and cadmium resistance in the tested microorganisms.

  11. Assessment of Heavy Metal Pollution in Topsoil around Beijing Metropolis.

    Directory of Open Access Journals (Sweden)

    Ranhao Sun

    Full Text Available The topsoil around Beijing metropolis, China, is experiencing impacts of rapid urbanization, intensive farming, and extensive industrial emissions. We analyzed the concentrations of Cu, Ni, Pb, Zn, Cd, and Cr from 87 topsoil samples in the pre-rainy season and 115 samples in the post-rainy season. These samples were attributed to nine land use types: forest, grass, shrub, orchard, wheat, cotton, spring maize, summer maize, and mixed farmland. The pollution index (PI of heavy metals was calculated from the measured and background concentrations. The ecological risk index (RI was assessed based on the PI values and toxic-response parameters. The results showed that the mean PI values of Pb, Cr, and Cd were > 1 while those of Cu, Ni, and Zn were < 1. All the samples had low ecological risk for Cu, Ni, Pb, Zn, and Cr while only 15.35% of samples had low ecological risk for Cd. Atmospheric transport rather than land use factors best explained the seasonal variations in heavy metal concentrations and the impact of atmospheric transport on heavy metal concentrations varied according to the heavy metal types. The concentrations of Cu, Cd, and Cr decreased from the pre- to post-rainy season, while those of Ni, Pb, and Zn increased during this period. Future research should be focused on the underlying atmospheric processes that lead to these spatial and seasonal variations in heavy metals. The policymaking on environmental management should pay close attention to potential ecological risks of Cd as well as identifying the transport pathways of different heavy metals.

  12. Using microbiological leaching method to remove heavy metals from sludge

    Directory of Open Access Journals (Sweden)

    Zhuyu Gu

    2017-01-01

    Full Text Available Microbial leaching is one of the most effective methods to remove heavy metals from sludge. In the conducted researches, the sludge samples were processed with Thiobacillus ferrooxidans and Thiobacillus thiooxidans obtained via cultivation, extraction and purification processes. Heavy metals such as Pb, Cd, Cu and Ni were leached from sludge by Thiobacillus ferrooxidans and Thiobacillus thiooxidans within different substrate concentration and pH value conditions. It is defined that from the point of view of economy and efficiency the optimal concentration of FeSO4.7H2O and sulfur for bio-leaching process was 0.2 g. The leaching rates of heavy metals such as Pb, Cd, Cu and Ni of the same concentration were 74.72%, 81.54%, 70.46% and 77.35% respectively. However, no significant differences depending on the pH value among the leaching rates were defined, even for the pH value of 1.5. Along with the removal of heavy metals from sludge, the organic matter, N, P, K were also leached to some extent. The losing rate of phosphorus was the highest and reached 38.44%. However, the content of organic matter, N, P, K in the processed sludge were higher in comparison with level I of the National Soil Quality Standards of China. Ecological risk of heavy metals in sludge before and after leaching was assessed by Index of Geo-accumulation (Igeo and comprehensive potential risk (RI. The results of research defined that the content of heavy metals in sludge meets the level of low ecological risk after leaching and their contents is lower in comparison with the National Agricultural Sludge Standard of China. Sludge leached by biological methods is possible to use for treatment for increasing soil fertility.

  13. IMPACT OF BIOSLUDGE APPLICATION ON HEAVY METALS CONTENT IN SUNFLOWER

    Directory of Open Access Journals (Sweden)

    Marek Slávik

    2012-02-01

    Full Text Available The application of decomposed substrate after continual biogas production is one of the possible ways how to use alternative energy sources with following monitoring of its complex influence on the hygienic state of soil with the emphasis on heavy metal input. The substances from bilge and drain sediments from water panels, also biosludge gained by continual co-fermentation of animal excrements belong to these compounds. The biosludge application is connected with possible risk of cadmium and lead, also other risky elements input into the soil. The analyses of applicated sludge prove that the determined heavy metals contents are compared with limitary value. These facts - hygienic state of soil, pH influence this limitary value and biosludge is suitable for soil application. The total heavy metals content in soil is related to the increased cadmium, nickel, chromium and cobalt contents. The analyses of heavy metals contents in sunflower seeds show that the grown yield does not comply with the legislative norms from the stand point of heavy metals content due to high zinc and nickel contents. Copper, cadmium, lead, chromium contents fulfil limitary values, for cobalt content the value is not mentioned in Codex Alimentarius. The nickel value in the control variant seeds is 2.2 times higher than the highest acceptable amount, then in variant where the sludge was applicated the nickel content was increased by 1.6 times. In the case of zinc there was increasing content in individual variants 4.7, or 4.8 times. The direct connection with the higher accumulation of zinc and nickel in soil by the influence of biosludge application is not definitely surveyed, the increased heavy metals contents in sunflower were primarily caused by their increased contents in soils.

  14. Novel forward osmosis process to effectively remove heavy metal ions

    KAUST Repository

    Cui, Yue

    2014-10-01

    In this study, a novel forward osmosis (FO) process for the removal of heavy metal ions from wastewater was demonstrated for the first time. The proposed FO process consists of a thin-film composite (TFC) FO membrane made from interfacial polymerization on a macrovoid-free polyimide support and a novel bulky hydroacid complex Na4[Co(C6H4O7)2]·r2H2O (Na-Co-CA) as the draw solute to minimize the reverse solute flux. The removal of six heavy metal solutions, i.e., Na2Cr2O7, Na2HAsO4, Pb(NO3)2, CdCl2, CuSO4, Hg(NO3)2, were successfully demonstrated. Water fluxes around 11L/m2/h (LMH) were harvested with heavy metals rejections of more than 99.5% when employing 1M Na-Co-CA as the draw solution to process 2000ppm(1 ppm=1 mg/L) heavy metal solutions at room temperature. This FO performance outperforms most nanofiltration (NF) processes. In addition, the high rejections were maintained at 99.5% when a more concentrated draw solution (1.5M) or feed solution (5000ppm) was utilized. Furthermore, rejections greater than 99.7% were still achieved with an enhanced water flux of 16.5LMH by operating the FO process at 60°C. The impressive heavy metal rejections and satisfactory water flux under various conditions suggest great potential of the newly developed FO system for the treatment of heavy metal wastewater. © 2014 Elsevier B.V.

  15. Accumulation of heavy metals using Sorghum sp.

    Science.gov (United States)

    Soudek, Petr; Petrová, Šarka; Vaňková, Radomíra; Song, Jing; Vaněk, Tomaš

    2014-06-01

    The essential requirement for the effective phytoremediation is selection of a plant species which should be metal tolerant, with high biomass production and known agronomic techniques. The above mentioned criteria are met by crop plant sorghum (Sorghum bicolor). The response of hydroponically grown S. bicolor plants to cadmium and zinc stress was followed. The impact of metal application on physiological parameters, including changes in chlorophylls contents and antioxidative enzymes activities, was followed during the stress progression. Cadmium and zinc were accumulated primarily in the roots of sorghum plants. However, elevation of metal concentrations in the media promoted their transfer to the shoots. Toxic effects of metals applied at lower concentrations were less serious in the shoots in comparison with their influence to the roots. When applied at higher concentrations, transfer of the metals into the leaves increased, causing growth reduction and leading to Chl loss and metal-induced chlorosis. Moreover, higher metal levels in the roots overcame the quenching capacity of peroxidase and glutathione transferase, which was associated with reduction of their activities. Fortification of antioxidant system by addition of glutathione significantly increased the accumulation of cadmium in the roots as well as in the shoots at the highest cadmium concentration applied.

  16. Heavy Metal Pollution and Chemical Profile of Cauvery River Water

    OpenAIRE

    Abida Begum; Ramaiah, M.; Harikrishna; Irfanulla Khan; K. Veena

    2009-01-01

    Analysis of water, plankton, fish and sediment reveals that the Cauvery River water in the downstream is contaminated by certain heavy metals. Water samples have high carbonate hardness. Concentrations of all elements and ions increase in the downstream. Main ions are in the following order: Na > HCO3 >Mg > K > Ca> Cl > SO4. Heavy metal concentration in water was Cr >Cu ≈ Mn > Co > Ni > Pb > Zn, in fish muscles Cr > Mn > Cu > Ni > Co > Pb ≈ Zn, in phytoplanktens Co > Zn > Pb > Mn > Cr and in ...

  17. Assessing fly ash treatment: Remediation and stabilization of heavy metals

    DEFF Research Database (Denmark)

    Lima, A.T.; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.

    2012-01-01

    the electrodialytic process (EDR) has been tried out before. The goal of removing heavy metals has always been the reuse of fly ash, for instance in agricultural fields (BEK). The best removal rates are here summarized and some new results have been added. MSW fly ashes are still too hazardous after treatment to even......Fly ashes from Municipal Solid Waste (MSW), straw (ST) and co-combustion of wood (CW) are here analyzed with the intent of reusing them. Two techniques are assessed, a remediation technique and a solidification/stabilization one. The removal of heavy metals from fly ashes through...

  18. [Heavy metal poisoning and renal injury in children].

    Science.gov (United States)

    Rong, Li-Ping; Xu, Yuan-Yuan; Jiang, Xiao-Yun

    2014-04-01

    Along with global environmental pollution resulting from economic development, heavy metal poisoning in children has become an increasingly serious health problem in the world. It can lead to renal injury, which tends to be misdiagnosed due to the lack of obvious or specific early clinical manifestations in children. Early prevention, diagnosis and intervention are valuable for the recovery of renal function and children's good health and growth. This paper reviews the mechanism of renal injury caused by heavy metal poisoning in children, as well as the clinical manifestations, diagnosis, and prevention and treatment of renal injury caused by lead, mercury, cadmium, and chromium.

  19. Brassinosteroids and Response of Plants to Heavy Metals Action

    Science.gov (United States)

    Rajewska, Iwona; Talarek, Marta; Bajguz, Andrzej

    2016-01-01

    Brassinosteroids (BRs) are a widespread group of plant hormones. These phytohormones play a crucial role in the regulation of growth and development of various plant species, and they demonstrate high biological activity. BRs are considered to demonstrate protective activity in the plants exposed to various stresses. Due to rapid industrialization and urbanization, heavy metals have become one of the most important plant stressors. In plants, accumulation of heavy metals beyond the critical levels leads to oxidative stress. However, BRs may inhibit the degradation of lipids, resulted from the overproduction of reactive oxygen species under stress conditions, and increase the activity of antioxidants. They also have the ability to promote phytochelatins synthesis. PMID:27242833

  20. Electrodialytic removal of heavy metals from fly ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul

    2002-01-01

    The aim of the Ph.D. work was to develop the electrodialytic remediation method for removal of heavy metals from fly ashes. The work was focused on two types of fly ashes: fly ashes from wood combustion and fly ashes from municipal solid waste incineration.......The aim of the Ph.D. work was to develop the electrodialytic remediation method for removal of heavy metals from fly ashes. The work was focused on two types of fly ashes: fly ashes from wood combustion and fly ashes from municipal solid waste incineration....

  1. Oil palm biomass as an adsorbent for heavy metals.

    Science.gov (United States)

    Vakili, Mohammadtaghi; Rafatullah, Mohd; Ibrahim, Mahamad Hakimi; Abdullah, Ahmad Zuhairi; Salamatinia, Babak; Gholami, Zahra

    2014-01-01

    Many industries discharge untreated wastewater into the environment. Heavy metals from many industrial processes end up as hazardous pollutants of wastewaters.Heavy metal pollution has increased in recent decades and there is a growing concern for the public health risk they may pose. To remove heavy metal ions from polluted waste streams, adsorption processes are among the most common and effective treatment methods. The adsorbents that are used to remove heavy metal ions from aqueous media have both advantages and disadvantages. Cost and effectiveness are two of the most prominent criteria for choosing adsorbents. Because cost is so important, great effort has been extended to study and find effective lower cost adsorbents.One class of adsorbents that is gaining considerable attention is agricultural wastes. Among many alternatives, palm oil biomasses have shown promise as effective adsorbents for removing heavy metals from wastewater. The palm oil industry has rapidly expanded in recent years, and a large amount of palm oil biomass is available. This biomass is a low-cost agricultural waste that exhibits, either in its raw form or after being processed, the potential for eliminating heavy metal ions from wastewater. In this article, we provide background information on oil palm biomass and describe studies that indicate its potential as an alternative adsorbent for removing heavy metal ions from wastewater. From having reviewed the cogent literature on this topic we are encouraged that low-cost oil-palm-related adsorbents have already demonstrated outstanding removal capabilities for various pollutants.Because cost is so important to those who choose to clean waste streams by using adsorbents, the use of cheap sources of unconventional adsorbents is increasingly being investigated. An adsorbent is considered to be inexpensive when it is readily available, is environmentally friendly, is cost-effective and be effectively used in economical processes. The

  2. [Hyperspectral remote sensing in monitoring the vegetation heavy metal pollution].

    Science.gov (United States)

    Li, Na; Lü, Jian-sheng; Altemann, W

    2010-09-01

    Mine exploitation aggravates the environment pollution. The large amount of heavy metal element in the drainage of slag from the mine pollutes the soil seriously, doing harm to the vegetation growing and human health. The investigation of mining environment pollution is urgent, in which remote sensing, as a new technique, helps a lot. In the present paper, copper mine in Dexing was selected as the study area and China sumac as the study plant. Samples and spectral data in field were gathered and analyzed in lab. The regression model from spectral characteristics for heavy metal content was built, and the feasibility of hyperspectral remote sensing in environment pollution monitoring was testified.

  3. Science Letters: Simultaneous removal of nitrate and heavy metals by iron metal

    Institute of Scientific and Technical Information of China (English)

    HAO Zhi-wei; XU Xin-hua; JIN Jian; HE Ping; LIU Yong; WANG Da-hui

    2005-01-01

    Great attention should be paid now to simultaneously removing common pollutants, especially inorganic pollutants such as nitrate and heavy metals, as individual removal has been investigated extensively. Removing common pollutants simultaneously by iron metal is a very effective alternative method. Near neutral pH, heavy metals, such as copper and nickel, can be removed rapidly by iron metal, while nitrate removal very much slower than that of copper and nickel, and copper can accelerate nitrate removal when both are removed simultaneously. Even a little amount of copper can enhance nitrate removal efficiently.Different mechanisms of these contaminants removal by iron metal were also discussed.

  4. Can heavy metal pollution defend seed germination against heat stress? Effect of heavy metals (Cu(2+), Cd(2+) and Hg(2+)) on maize seed germination under high temperature.

    Science.gov (United States)

    Deng, Benliang; Yang, Kejun; Zhang, Yifei; Li, Zuotong

    2016-09-01

    Heavy metal pollution, as well as greenhouse effect, has become a serious threat today. Both heavy metal and heat stresses can arrest seed germination. What response can be expected for seed germination under both stress conditions? Here, the effects of heavy metals (Cu(2+), Cd(2+) and Hg(2+)) on maize seed germination were investigated at 20 °C and 40 °C. Compared with 20 °C, heat stress induced thermodormancy. However, this thermodormancy could be significantly alleviated by the addition of a low concentration of heavy metals. Heavy metals, as well as heat stress induced H2O2 accumulation in germinating seeds. Interestingly, this low concentration of heavy metal that promoted seed germination could be partly blocked by DMTU (a specific ROS scavenger), irrespective of temperature. Accordingly, H2O2 addition reinforced this promoting effect on seed germination, which was induced by a low concentration of heavy metal. Furthermore, we found that the NADPH oxidase derived ROS was required for seed germination promoted by the heavy metals. Subsequently, treatment of seeds with fluridone (a specific inhibitor of ABA) or ABA significantly alleviated or aggravated thermodormancy, respectively. However, this alleviation or aggravation could be partly attenuated by a low concentration of heavy metals. In addition, germination that was inhibited by high concentrations of heavy metals was also partly reversed by fluridone. The obtained results support the idea that heavy metal-mediated ROS and hormone interaction can finally affect the thermodormancy release or not.

  5. HEAVY METALS CONTAMINATION OF TOPSOIL AND ...

    African Journals Online (AJOL)

    a

    Average topsoil metal concentrations (0-10 cm) in auto-repair workshop areas ...... States Environmental Protection Agency (USEPA) with a carcinogenicity classification A ... Mellor, A.; Bevan, J.R. Water, Air, and Soil Pollution 1999, 112, 327.

  6. Heavy Metal Bioavailability and Bioaccessibility in Soil

    Science.gov (United States)

    Dean, John Richard

    This chapter considers the use of a variety of approaches to assess either the bioavailability or the bioaccessibility of metals in soil. The bioavailability of metals from soils is considered with respect to a series of single-extraction methods, including the use of ethylenediaminetetraacetic acid (EDTA), acetic acid, diethylenetriaminepentaacetic acid (DTPA), ammonium nitrate, calcium chloride and sodium nitrate. Then, a procedure for the recovery of metals using a three-stage sequential extraction protocol is described. Two alternate approaches for assessing the environmental health risk to humans by undertaking in vitro gastrointestinal extraction (also known as the physiologically based extraction test, PBET) are considered. Finally, two acid digestion protocols that allow the pseudo-total metal content of samples to be assessed are provided.

  7. DETERMINATION OF HEAVY METALS IN IRANIAN AND IMPORTED BLACK TEA

    Directory of Open Access Journals (Sweden)

    F. Ansari

    2007-09-01

    Full Text Available Tea is the most popular beverage in the world and contains several essential nutrients, which are beneficial for human health. The contamination of tea leaves by heavy metals may pose a serious threat to human, because they are not biodegradable and remain in environment and pass to food chain. In this study, the concentration of heavy metals of Cd, Pb, Ni, and Al and macro-elements of Fe, Zn, Cu, and Mn were determined by atomic absorption spectrometry on 30 samples of black tea cultivated in Iran and compared with the results for 30 samples of imported black tea in 2006. The results of analysis showed that the mean level of Al was 699.2±172.7mg/kg for Iranian and 388.3±98.3mg/kg for imported black tea. However, the values for Cd, Pb, and Ni were non-detectable. The most abundant nutritive metal was manganese with 155.2-214.2mg/kg and 96.7-332.9mg/kg in Iranian and imported black tea, respectively. The average contents of detectable heavy metals were significantly (p<0.05 higher in Iranian black tea. According to the results of this study, it is justifiable to set maximum residue level for heavy metals in tea, such as Al which appears to be very high in concentration.

  8. Heavy metal characterization of circulating fluidized bed derived biomass ash.

    Science.gov (United States)

    Li, Lianming; Yu, Chunjiang; Bai, Jisong; Wang, Qinhui; Luo, Zhongyang

    2012-09-30

    Although the direct combustion of biomass for energy that applies circulating fluidized bed (CFB) technology is steadily expanding worldwide, only few studies have conducted an environmental assessment of biomass ash thus far. Therefore, this study aims to integrate information on the environmental effects of biomass ash. We investigated the concentration of heavy metal in biomass ash samples (bottom ash, cyclone ash, and filter ash) derived from a CFB boiler that combusted agricultural and forest residues at a biomass power plant (2×12 MW) in China. Ash samples were gathered for the digestion and leaching test. The heavy metal content in the solution and the leachate was studied via an inductively coupled plasma-mass spectrometer and a Malvern Mastersizer 2000 mercury analyzer. Measurements for the chemical composition, particle size distribution, and the surface morphology were carried out. Most of the metals in cyclone ash particles were enriched, whereas Ti and Hg were enriched in filter ash. Residence time contributed most to heavy metal enrichment. Under HJ/T 300 conditions, the heavy metals showed serious leaching characteristics. Under EN 12457-2 conditions, leaching behavior was hardly detected.

  9. Accumulation of Heavy Metals in Vegetables from Agricultural Soils

    Directory of Open Access Journals (Sweden)

    ELJAN KASA

    2015-06-01

    Full Text Available This study analyzed the heavy metals in vegetables cultivated in private gardens in Bregu i Matit, an important agricultural area in the NW Albania.The plant and soil samples taken from irrigated and non-irrigated fields in this area were analyzed for the concentrations of Cd, Cu, Zn, Pb and Ni using atomic absorption spectroscopy (AAS, after extraction by HNO3 and H2O2.The transfer factors (TF were used to evaluate the risk of metal transfer from soil to plant and the FAO/WHO safe limits to assess the potential hazards of heavy metals to human health. The ranges of heavy metal concentrations ± standard deviation in vegetable samples were (mg kg- 1: Cu 2.98-12.90 (±3.08, Ni 4.82-35.79 (±7.68, Zn Zn > Cu > Ni > Pb. The TF values indicate that only Cd was accumulated in plants.The contents of Cd in three vegetable samples, Pb in four samples, and Cu in one sample were above the safe limits set by the FAO/WHO for heavy metals in foods and vegetables indicating that consumption of vegetables grown in the studied soils could be dangerous to human health.

  10. Phytoremediation of heavy metal contaminated soil by Jatropha curcas.

    Science.gov (United States)

    Chang, Fang-Chih; Ko, Chun-Han; Tsai, Ming-Jer; Wang, Ya-Nang; Chung, Chin-Yi

    2014-12-01

    This study employed Jatropha curcas (bioenergy crop plant) to assist in the removal of heavy metals from contaminated field soils. Analyses were conducted on the concentrations of the individual metals in the soil and in the plants, and their differences over the growth periods of the plants were determined. The calculation of plant biomass after 2 years yielded the total amount of each metal that was removed from the soil. In terms of the absorption of heavy metal contaminants by the roots and their transfer to aerial plant parts, Cd, Ni, and Zn exhibited the greatest ease of absorption, whereas Cu, Cr, and Pb interacted strongly with the root cells and remained in the roots of the plants. J. curcas showed the best absorption capability for Cd, Cr, Ni, and Zn. This study pioneered the concept of combining both bioremediation and afforestation by J. curcas, demonstrated at a field scale.

  11. Nonthermal plasma reactors for the production of light hydrocarbon olefins from heavy oil

    Directory of Open Access Journals (Sweden)

    Prieto G.

    2003-01-01

    Full Text Available During the last decade, nonthermal plasma technology was applied in many different fields, focusing attention on the destruction of harmful compounds in the air. This paper deals with nonthermal plasma reactors for the conversion of heavy oil into light hydrocarbon olefins, to be employed as gasoline components or to be added in small amounts for the catalytic reduction of nitrogen oxide compounds in the treatment of exhaust gas at power plants. For the process, the plate-plate nonthermal plasma reactor driven by AC high voltage was selected. The reactor was modeled as a function of parameter characteristics, using the methodology provided by the statistical experimental design. The parameters studied were gap distance between electrodes, carrier gas flow and applied power. Results indicate that the reactions occurring in the process of heavy oil conversion have an important selective behavior. The products obtained were C1-C4 hydrocarbons with ethylene as the main compound. Operating the parameters of the reactor within the established operative window of the system and close to the optimum conditions, efficiencies as high as 70 (mul/joule were obtained. These values validate the process as an in-situ method to produce light olefins for the treatment of nitrogen oxides in the exhaust gas from diesel engines.

  12. Pyrolytic Treatment and Fertility Enhancement of Soils Contaminated with Heavy Hydrocarbons.

    Science.gov (United States)

    Vidonish, Julia E; Zygourakis, Kyriacos; Masiello, Caroline A; Gao, Xiaodong; Mathieu, Jacques; Alvarez, Pedro J J

    2016-03-01

    Pyrolysis of contaminated soils at 420 °C converted recalcitrant heavy hydrocarbons into "char" (a carbonaceous material similar to petroleum coke) and enhanced soil fertility. Pyrolytic treatment reduced total petroleum hydrocarbons (TPH) to below regulatory standards (typically hydrocarbons (PAHs) was not observed, with post-pyrolysis levels well below applicable standards. Plant growth studies showed a higher biomass production of Arabidopsis thaliana and Lactuca sativa (Simpson black-seeded lettuce) (80-900% heavier) in pyrolyzed soils than in contaminated or incinerated soils. Elemental analysis showed that pyrolyzed soils contained more carbon than incinerated soils (1.4-3.2% versus 0.3-0.4%). The stark color differences between pyrolyzed and incinerated soils suggest that the carbonaceous material produced via pyrolysis was dispersed in the form of a layer coating the soil particles. Overall, these results suggest that soil pyrolysis could be a viable thermal treatment to quickly remediate soils impacted by weathered oil while improving soil fertility, potentially enhancing revegetation.

  13. Polycyclic Aromatic Hydrocarbon and Metal Concentrations in Imported Canned Maize

    Directory of Open Access Journals (Sweden)

    Embbey K Ossai

    2014-08-01

    Full Text Available Concentrations and profile of polycyclic aromatic hydrocarbons(PAHs and metals (Cd, Pb, Ni, Cr, Fe and Mn were determined in selected brands of canned maize in the Nigeria market with a view to providing information on the hazards associated with the consumption of these products. The measurement of the concentrations of PAHs was carried out by using a gas chromatography equipped with flame ionization detector (GC-FID after extraction by ultra-sonication with acetone/dichloromethane and clean-up. The 16 PAH concentrations varied between 45.1 and 335.7 µg/kg. The concentrations of the indicators for occurrence and effects of PAHs in food varied from 3.6 to 114.5 µg/kg for BaP, 6.4 to 168.2 µg/kg for PAH2, 11.8 to 232.7 µg/kg for PAH4 and 19.4 to 327.3 µg/kg for PAH8. The concentrations of metals were determined by using atomic absorption spectrometry after acid digestion. The concentrations of metals in these samples ranged from <0.05 to 0.9 µg/g for Cd; 5.0 to 8.0 µg/g for Pb, 0.8 to 1.7 µg/g for Fe while Cr and Mn were less than the limits of quantification (<0.05 µg/g. The concentrations of Cd and Pb in these canned maize samples were above their permissible limits for foods.

  14. Removal of heavy metal from industrial effluents using Baker's yeast

    Science.gov (United States)

    Ferdous, Anika; Maisha, Nuzhat; Sultana, Nayer; Ahmed, Shoeb

    2016-07-01

    Bioremediation of wastewater containing heavy metals is one of the major challenges in environmental biotechnology. Heavy metals are not degraded and as a result they remain in the ecosystem, and pose serious health hazards as it comes in contact with human due to anthropogenic activities. Biological treatment with various microorganisms has been practiced widely in recent past, however, accessing and maintaining the microorganisms have always been a challenge. Microorganisms like Baker's yeast can be very promising biosorbents as they offer high surface to volume ratio, large availability, rapid kinetics of adsorption and desorption and low cost. The main aim of this study is to evaluate the applicability of the biosorption process using baker's yeast. Here we present an experimental investigation of biosorption of Chromium (Cr) from water using commercial Baker's Yeast. It was envisaged that yeast, dead or alive, would adsorb heavy metals, however, operating parameters could play vital roles in determining the removal efficiency. Parameters, such as incubation time, pH, amount of biosorbent and heavy metal concentration were varied to investigate the impacts of those parameters on removal efficiency. Rate of removal was found to be inversely proportional to the initial Cr (+6) concentrations but the removal rate per unit biomass was a weakly dependent on initial Cr(+6) concentrations. Biosorption process was found to be more efficient at lower pH and it exhibited lower removal with the increase in solution pH. The optimum incubation time was found to be between 6-8 hours and optimum pH for the metal ion solution was 2. The effluents produced in leather industries are the major source of chromium pollution in Bangladesh and this study has presented a very cost effective yet efficient heavy metal removal approach that can be adopted for such kind of wastewater.

  15. Spatial variance of POPs and heavy metals in transformer oil-contaminated soil around Tamil Nadu.

    Science.gov (United States)

    Murugan, Karuvelan; Vasudevan, Namasivayam

    2017-09-05

    The persistent organic pollutants in the environment are one of the global issues to their unregulated disposal and informal recycling. This study investigates the contamination of soil with polychlorinated biphenyls (PCBs), polyaromatic hydrocarbons (PAHs), phenolic compounds and heavy metals via spillage of transformer oil (TO). Fresh TO (FTO), used TO (UTO) and soil samples were analysed using GC-MS to confirm the presence of 8 PCB congeners, 16 PAHs and 24 types of phenolic compounds and using inductively coupled plasma optical emission spectrometry to confirm the presence of 7 heavy metals. The chromatographic analysis revealed the levels of mono-, di-, tri-, tetra-, penta-, hexa-, hepta- and octachlorobiphenyls in FTO to be 5.63, 25.24, 0.195, 0.185, 2.169, 1.023 and 5.28 mg/L and the level of mono-, di-, tri-, tetra-, penta- and hexachlorobiphenyls in UTO to be 0.27, 1.21, 1.31, 0.80, 1.77 and 3.90 mg/L. Analysis of soil from 10 different TO-contaminated sites showed the presence of PCBs, PAHs, phenolic compounds and heavy metals in the concentration range of 0.53-42.87 mg/kg, 3.19-246.6 μg/kg, 0.01-4086.45 μg/kg and 1.0-401.3 mg/kg, respectively. The variation in the concentration of these compounds and heavy metals among different sampling sites was determined using principal component analysis (PCA), metric multi-dimensional scaling (MDS) and Bray-Curtis cluster analysis (Bu-CA). The toxicity equivalence factor and the mechanism involved in the disruption of endocrine system are discussed. Thus, this study exemplifies the need for complete ban of PCB-containing TOs in developing countries and urges the need for technology for the disposal of TO.

  16. Use of cestodes as indicator of heavy-metal pollution.

    Science.gov (United States)

    Yen Nhi, Tran Thi; Mohd Shazili, Noor Azhar; Shaharom-Harrison, Faizah

    2013-01-01

    Thirty snakehead fish, Channa micropeltes (Cuvier, 1831) were collected at Lake Kenyir, Malaysia. Muscle, liver, intestine and kidney tissues were removed from each fish and the intestine was opened to reveal cestodes. In order to assess the concentration of heavy metal in the environment, samples of water in the surface layer and sediment were also collected. Tissues were digested and the concentrations of manganese (Mn), zinc (Zn), copper (Cu), cadmium (Cd) and lead (Pb) were analysed by using inductively-coupled plasma mass-spectrometry (ICP-MS) equipment. The results demonstrated that the cestode Senga parva (Fernando and Furtado, 1964) from fish hosts accumulated some heavy metals to a greater extent than the water and some fish tissues, but less than the sediment. In three (Pb, Zn and Mn) of the five elements measured, cestodes accumulated the highest metal concentrations, and in remaining two (Cu and Cd), the second highest metal accumulation was recorded in the cestodes when compared to host tissues. Therefore, the present study indicated that Senga parva accumulated metals and might have potential as a bioindicator of heavy-metal pollution.

  17. Effects of heavy metal pollution on soil microbial biomass

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    This paper reviews the effects of heavy metals on microbial biomass in metal-polluted soils. Laboratory and field investigations where metals were applied ass inorganic or organic salts demonstrated a significant decline in the size of s oil microbial biomass. In most of the cases, negative effects were evident at metal concentrations below the European Community's (EC) current permissible metal levels in the soil. Application of metal-enriched sludges and composts caused significant inhibition of microbial biomass at surprisingly modest concentrations of metals in the soil that were indeed smaller than those likely to decrease the growth of sensitive crop species. On the whole, relative toxicity of metals decreased in the order of Cd>Cu>Zn>Pb, but a few exceptions to this trend also existed. A significant decline in the biomass carbon to organic carbon ratio(Cmin/Corg) in metal-polluted soils indicated that this parameter can serve as a good indicator of the toxicity of metals on soil microflora. The knowledge regarding the response of soil biota to metal interactions and the factors affecting metal toxicity to soil microorganisms is still very limited and warrants further study.

  18. Heavy metal: musiikkia vai elämäntapa?

    OpenAIRE

    Rimbacher, Niko

    2010-01-01

    Opinnäytetyöni on ontologinen kuvaus heavy metal – musiikista ja kulttuurista. Työssä pohditaan, mitä heavy metal on ja mitä se kuuntelijalleen merkitsee. Työssä käydään läpi myös heavy metalin historian vaiheita. Työ on toteutettu itsenäisesti ilman tilaajaa. Työssä on käytetty lähteitä dokumenttielokuvista kirjallisuuden kautta sosiaaliseen mediaan. Onko hevi vain musiikkia vai jopa elämäntavaksi kasvanut musiikki-instituutio? Tutkimuksissa kävi ilmi, että on olemassa monenlaisia hevi...

  19. Deposition of sediment and associated heavy metals on floodplains

    NARCIS (Netherlands)

    Thonon, Ivo

    2006-01-01

    In recent years, floodplains have become widely acknowledged as important natural sinks for sediments and associated substances like nutrients, PAHs, PCBs and heavy metals. The character of floodplains will change in the near future because of landscaping measures (excavation of secondary channels,

  20. Spatiotemporal Analysis of Heavy Metal Water Pollution in Transitional China

    Directory of Open Access Journals (Sweden)

    Huixuan Li

    2015-07-01

    Full Text Available China’s socioeconomic transitions have dramatically accelerated its economic growth in last three decades, but also companioned with continuous environmental degradation. This study will advance the knowledge of heavy metal water pollution in China from a spatial–temporal perspective. Specifically, this study addressed the following: (1 spatial patterns of heavy metal water pollution levels were analyzed using data of prefecture-level cities from 2004 to 2011; and (2 spatial statistical methods were used to examine the underlying socioeconomic and physical factors behind water pollution including socioeconomic transitions (industrialization, urbanization, globalization and economic development, and environmental characteristic (natural resources, hydrology and vegetation coverage. The results show that only Cr pollution levels increased over the years. The individual pollution levels of the other four heavy metals, As, Cd, Hg, and Pb, declined. High heavy metal water pollution levels are closely associated with both anthropogenic activities and physical environments, in particular abundant mineral resources and industrialization prosperity. On the other hand, economic development and urbanization play important roles in controlling water pollution problems. The analytical findings will provide valuable information for policy-makers to initiate and adjust protocols and strategies for protecting water sources and controlling water pollution; thus improving the quality of living environments.

  1. Impact of heavy metals and PCBs on marine picoplankton.

    Science.gov (United States)

    Caroppo, Carmela; Stabili, Loredana; Aresta, Michele; Corinaldesi, Cinzia; Danovaro, Roberto

    2006-12-01

    Synergistic/antagonistic effects of multiple contaminants in marine environments are almost completely unexplored. In the present study, we investigated the effects of heavy metals (Zn and Pb) and PCBs on picoplankton abundance, biomass, cell size distribution, and bacterial C production. Natural picoplankton assemblages were exposed to heavy metals (Zn or Pb), organic contaminants (PCBs, Aroclor 1260), and to a mixture of different contaminants. The results of the present study indicate that Zn addition stimulated heterotrophic growth, whereas Pb has a negative impact on heterotrophic picoplankton, particularly significant in the first 24 h. Heavy metals had no effects on the autotrophic component. The addition of Aroclor 1260 had a significant impact on abundance, biomass, and cell size of autotrophic and heterotrophic picoplankton, and reduced significantly bacterial secondary production. Three weeks after PCB treatment, heterotrophic bacteria displayed a clear resilience, both in terms of abundance and biomass, reaching values comparable to those of the controls, but not in terms of bacterial C production. Our results indicate that picoplankton can be sensitive indicators of impact determined by heavy metals and PCBs in coastal marine systems.

  2. Concentration and Health Implication of Heavy Metals in Drinking ...

    African Journals Online (AJOL)

    The study was undertaken to assess the status of drinking water quality in the ... pH, and turbidity and ten heavy metals,viz., As, Cd, Co, Cu, Cr, Fe, Mn, Ni, Pb, and ... treatment practices in the areas, which in turn have important human health ...

  3. Predicting the phytoextraction duration to remediate heavy metal contaminated soils

    NARCIS (Netherlands)

    Koopmans, G.F.; Römkens, P.F.A.M.; Song, J.; Temminghoff, E.J.M.; Japenga, J.

    2007-01-01

    The applicability of phytoextraction to remediate soils contaminated with heavy metals (HMs) depends on, amongst others, the duration before remediation is completed. The impact of changes in the HM content in soil occurring during remediation on plant uptake has to be considered in order to obtain

  4. New trends in removing heavy metals from industrial wastewater

    National Research Council Canada - National Science Library

    Barakat, M.A

    2011-01-01

    ... to its discharge to the environment. Heavy metal removal from inorganic effluent can be achieved by conventional treatment processes such as chemical precipitation, ion exchange, and electrochemical removal. These processes have significant disadvantages, which are, for instance, incomplete removal, high-energy requirements, and production of toxic slud...

  5. Regional ecotoxicological hazards associated with anthropogenic enrichment of heavy metals

    NARCIS (Netherlands)

    Spijker, J.H.; Mol, G.; Posthuma, L.

    2011-01-01

    Regional geochemical data of heavy metals are commonly used for environmental risk assessment and management. Often these data are based on so-called total concentrations, whereas the exposure to the mobile or reactive fraction of these elements finally determines whether the exposed ecosystem is at

  6. Predicting the phytoextraction duration to remediate heavy metal contaminated soils

    NARCIS (Netherlands)

    Koopmans, G.F.; Römkens, P.F.A.M.; Song, J.; Temminghoff, E.J.M.; Japenga, J.

    2007-01-01

    The applicability of phytoextraction to remediate soils contaminated with heavy metals (HMs) depends on, amongst others, the duration before remediation is completed. The impact of changes in the HM content in soil occurring during remediation on plant uptake has to be considered in order to obtain

  7. Antibiogram and heavy metal tolerance of bullfrog bacteria in Malaysia

    Directory of Open Access Journals (Sweden)

    M. Najiah

    2011-10-01

    Full Text Available Bacterial isolates from 30 farmed bullfrogs (Lithobates catesbeianus weighing 500-600 g at Johore, Malaysia with external clinical signs of ulcer, red leg and torticollis were tested for their antibiograms and heavy metal tolerance patterns. A total of 17 bacterial species with 77 strains were successfully isolated and assigned to 21 antibiotics and 4 types of heavy metal (Hg2+, Cr6+, Cd2+, Cu2+. Results revealed that bacteria were resistant against lincomycin (92%, oleandomycin (72.7% and furazolidone (71.4% while being susceptible to chloramphenicol and florfenicol at 97.4%. The multiple antibiotic resistance (MAR index for C. freundii, E. coli and M. morganii was high with the value up to 0.71. Bacterial strains were found to exhibit 100 % resistance to chromium and mercury. High correlation of resistance against both antibiotics and heavy metals was found (71.4 to 100% between bullfrog bacteria isolates, except bacteria that were resistant to kanamycin showed only 25% resistance against Cu2+. Based on the results in this study, bacterial pathogens of bullfrog culture in Johore, Malaysia, were highly resistant to both antibiotics and heavy metals.

  8. Adolescents and Heavy Metal Music: From the Mouths of Metalheads.

    Science.gov (United States)

    Arnett, Jeffrey

    1991-01-01

    Attitudes and characteristics of adolescents who like heavy metal music (HMM) were explored in a study of 52 adolescents (largely White males) who liked HMM and 123 who did not in suburban Atlanta (Georgia). HMM is discussed as a reflection of, rather than a cause of, adolescent alienation. (SLD)

  9. Screening Capsicum chinense fruits for heavy metals bioaccumulation

    Science.gov (United States)

    Elevated concentrations of heavy metals in edible plants could expose consumers to excessive levels of potentially hazardous chemicals. Sixty-three accessions (genotypes) of Capsicum chinense Jacq, collected from 8 countries of origin, were grown in a silty-loam soil under field conditions. At matur...

  10. Heavy metal analyses and nutritional composition of raw and ...

    African Journals Online (AJOL)

    ... trend moisture (43.24 - 76.79 %) > carbohydrate (3.16 – 63.45 %) > protein ... In this study, these fishes are generally low in fats (lean fish), and fish ... lower than the maximum standard level reported to be 0.5 mg/kg dry weight ... The fresh water fishes showed higher concentration of heavy metals than ... Metrics Loading .

  11. Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

    Directory of Open Access Journals (Sweden)

    Zhiliang Chen

    2016-07-01

    Full Text Available Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization of heavy metals in municipal solid waste incineration (MSWI fly ash. Three heavy metals (Cu, Cr, Pb loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a significant decrease in particle size, a rise in its BET-surface, and turning basic crystals therein into amorphous structures. The dissolution rate of acid buffering materials present in activated particles is enhanced, resulting in a rising pH value of the leachate, reducing the leaching out of some heavy metals.

  12. Assessment of heavy metals leachability from traditional clay pots ...

    African Journals Online (AJOL)

    Leachate from the clay raw pulp material was initially analysed for heavy metals ... Cd, Fe and Zn. Results of this study showed that Pb, Cd and Fe were transferred ... are different from regions to region and the techniques of making them differ, ...

  13. Phenol degradation and heavy metal tolerance of Antarctic yeasts.

    Science.gov (United States)

    Fernández, Pablo Marcelo; Martorell, María Martha; Blaser, Mariana G; Ruberto, Lucas Adolfo Mauro; de Figueroa, Lucía Inés Castellanos; Mac Cormack, Walter Patricio

    2017-03-07

    In cold environments, biodegradation of organic pollutants and heavy metal bio-conversion requires the activity of cold-adapted or cold-tolerant microorganisms. In this work, the ability to utilize phenol, methanol and n-hexadecane as C source, the tolerance to different heavy metals and growth from 5 to 30 °C were evaluated in cold-adapted yeasts isolated from Antarctica. Fifty-nine percent of the yeasts were classified as psychrotolerant as they could grow in all the range of temperature tested, while the other 41% were classified as psychrophilic as they only grew below 25 °C. In the assimilation tests, 32, 78, and 13% of the yeasts could utilize phenol, n-hexadecane, and methanol as C source, respectively, but only 6% could assimilate the three C sources evaluated. In relation to heavy metals ions, 55, 68, and 80% were tolerant to 1 mM of Cr(VI), Cd(II), and Cu(II), respectively. Approximately a half of the isolates tolerated all of them. Most of the selected yeasts belong to genera previously reported as common for Antarctic soils, but several other genera were also isolated, which contribute to the knowledge of this cold environment mycodiversity. The tolerance to heavy metals of the phenol-degrading cold-adapted yeasts illustrated that the strains could be valuable as inoculant for cold wastewater treatment in extremely cold environments.

  14. Assessment of heavy metals concentrations in coastal sediments in ...

    African Journals Online (AJOL)

    EJIRO

    are dangerous for sea wild life and for human food resources. ... Key words: Marine pollution, heavy metals, coastal sediments, toxicity, Nosy Be, .... source of Cd and Pb in sediments come from ferry port ..... Water Environment in the Eastern African Region. ... marine organisms from the Northern part of the Gulf of Suez, Red.

  15. Optimization of heavy metals total emission, case study: Bor (Serbia)

    Science.gov (United States)

    Ilić, Ivana; Bogdanović, Dejan; Živković, Dragana; Milošević, Novica; Todorović, Boban

    2011-07-01

    The town of Bor (Serbia) is one of the most polluted towns in southeastern Europe. The copper smelter which is situated in the centre of the town is the main pollutant, mostly because of its old technology, which leads to environmental pollution caused by higher concentrations of SO 2 and PM 10. These facts show that the word is about a very polluted region in Europe which, apart from harming human health in the region itself, poses a particular danger for wider area of southeastern Europe. Optimization of heavy metal's total emission was undertaken because years of long contamination of the soil with heavy metals of anthropogenic origin created a danger that those heavy metals may enter the food chains of animals and people, which can lead to disastrous consequences. This work represents the usage of Geographic Information System (GIS) for establishing a multifactor assessment model to quantitatively divide polluted zones and for selecting control sites in a linear programming model, combined with PROMETHEE/GAIA method, Screen View modeling system, and linear programming model. The results show that emissions at some control sites need to be cut for about 40%. In order to control the background of heavy metal pollution in Bor, the ecological environment must be improved.

  16. Assessment of Heavy Metal Contamination in Soils around Cassava ...

    African Journals Online (AJOL)

    treatment. Apart from the fact that cassava effluents contain high cyanide content which has adverse ... cottage industries such as cassava processing in ...... European. Soil Bureau Research Report No. 4. Office of. Official Publication of the ... irrigation using waste water on heavy metal ... Biological Sciences 7(2): 405-408.

  17. Electrodialytic Remediation of Heavy Metal Polluted Soil. An Innovative Technique

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Hansen, Henrik; Karlsmose, Bodil

    1997-01-01

    Electrodialytic remediationof heavy metal polluted soil is a newly developed method which combines the electrokinetic movement of ions in soil with the principle of electrodialysis. The method has prowen to work in laboratorscale and at presnet two types of pilot plants are build....

  18. Virginia Household Water Quality Program: Heavy Metals in Household Water

    OpenAIRE

    Ling, Erin; Benham, Brian Leslie, 1960-; Forrester, Scott

    2011-01-01

    Federal law requires public water utilities to provide biologically safe water. However, the safety of privately owned, individual water supplies such as wells, springs, and cisterns is the sole responsibility of the owner. This publication discusses the sources, testing, and treatment of heavy metals.

  19. Proficiency test for heavy metals in compound feed

    NARCIS (Netherlands)

    Pereboom, D.P.K.H.; Elbers, I.J.W.; Jong, de J.; Lee, van der M.K.; Nijs, de W.C.M.

    2016-01-01

    The here described proficiency test for heavy metals in compound feed was organised by RIKILT, Wageningen UR in accordance with ISO 17043. RIKILT Wageningen UR has an ISO/IEC 17043 accreditation for proficiency tests of residues in products of animal origin. However, this specific test is not part

  20. Heavy metals contamination of Chrysichthys nigrodigitatus and ...

    African Journals Online (AJOL)

    GREGORY

    2010-09-27

    Sep 27, 2010 ... concentration of the metals found in fish and water was less than that recommended by the World ... that have relatively high density, which are toxic and poi- sonous at ... phase is through the feeding on aquatic organisms that.

  1. Heavy Metal Tolerance in Stenotrophomonas maltophilia

    Science.gov (United States)

    Pages, Delphine; Rose, Jerome; Conrod, Sandrine; Cuine, Stephane; Carrier, Patrick; Heulin, Thierry; Achouak, Wafa

    2008-01-01

    Stenotrophomonas maltophilia is an aerobic, non-fermentative Gram-negative bacterium widespread in the environment. S. maltophilia Sm777 exhibits innate resistance to multiple antimicrobial agents. Furthermore, this bacterium tolerates high levels (0.1 to 50 mM) of various toxic metals, such as Cd, Pb, Co, Zn, Hg, Ag, selenite, tellurite and uranyl. S. maltophilia Sm777 was able to grow in the presence of 50 mM selenite and 25 mM tellurite and to reduce them to elemental selenium (Se0) and tellurium (Te0) respectively. Transmission electron microscopy and energy dispersive X-ray analysis showed cytoplasmic nanometer-sized electron-dense Se0 granules and Te0 crystals. Moreover, this bacterium can withstand up to 2 mM CdCl2 and accumulate this metal up to 4% of its biomass. The analysis of soluble thiols in response to ten different metals showed eightfold increase of the intracellular pool of cysteine only in response to cadmium. Measurements by Cd K-edge EXAFS spectroscopy indicated the formation of Cd-S clusters in strain Sm777. Cysteine is likely to be involved in Cd tolerance and in CdS-clusters formation. Our data suggest that besides high tolerance to antibiotics by efflux mechanisms, S. maltophilia Sm777 has developed at least two different mechanisms to overcome metal toxicity, reduction of oxyanions to non-toxic elemental ions and detoxification of Cd into CdS. PMID:18253487

  2. Speciation of heavy metals in River Rhine

    NARCIS (Netherlands)

    Vega, F.A.; Weng, L.

    2013-01-01

    Chemical speciation of Zn, Cu, Ni, Cd and Pb in River Rhine was studied by measuring free ion concentration and distribution in nanoparticles, and by comparing the measurement with speciation modeling. Concentrations of free metal ions were determined in situ using Donnan Membrane Technique (DMT). T

  3. Surfactin restores and enhances swarming motility under heavy metal stress.

    Science.gov (United States)

    Singh, Anil Kumar; Dhanjal, Soniya; Cameotra, Swaranjit Singh

    2014-04-01

    The present work reports the importance of lipopeptide biosurfactant on swarming motility of multi-metal resistant (MMR) bacterium under heavy metal stress. The MMR bacteria strain CM100B, identified as Bacillus cereus, was isolated from the coal mine sample. The strain was able to grow and reduce several metals namely Cd(2+), Co(2+), Cu(2+), Ni(2+), Mn(2+) and Pb(2+) ions which are common environmental pollutants. Presence of toxic heavy metal ions in the swarming medium significantly altered the motility of CM100B. Presence of Cd(2+) and Pb(2+) ions inhibited development of peritrichous flagella, thus inhibiting swarming motility. However, the addition of anionic biosurfactant surfactin restored (in case of Cd(2+) and Pb(2+) ions) or enhanced (in case of Co(2+), Cu(2+), Ni(2+) and Mn(2+)) the swarming ability of CM100B. Zeta potential studies for determining bacterial cell surface charge indicated that surfactin provided a suitable swarming environment to bacteria even under metal stress by chelating to cationic metal ions. Non-ionic surfactant Triton X-100 was unable to restore swarming under Cd(2+) and Pb(2+) ion stress. Thus, suggesting that surfactin can aid in motility not only by reducing the surface tension of swarming medium but also by binding to metal ions in the presence of metal ions stress.

  4. Heavy metals in miscarriages and stillbirths in developing nations

    Directory of Open Access Journals (Sweden)

    Cecilia Nwadiuto Amadi

    2017-06-01

    Full Text Available Objectives: Cases of miscarriage and stillbirths due to heavy metal poisoning continue to be on the rise in developing nations. In these countries like Nigeria, the menace of miscarriage is not readily linked to heavy metal exposure. This could be as a result of insufficient scientific data available due to poor documentation and inadequate public health education on the consequences of these heavy metals on maternal health. The heavy metals mercury, lead and cadmium are toxicants which have been shown to cross the placental barrier to accumulate in fetal tissues. Methods: For this review, relevant databases were searched for original scientific reports and a total of 100 articles were retained for analysis. Required data was extracted from these studies and their methodology assessed. Results: Miscarriages and stillbirths were observed from exposure to five heavy metals namely; mercury, arsenic, lead, chromium and cadmium. These heavy metals were associated with increased incidence of miscarriages in developing nations. In Nigeria, women with history of miscarriage had blood lead levels >25 µg/dL during pregnancy with approximately 41.61% increase in miscarriage incidence. Cadmium blood level was found to be 85.96 ± 1.09 μg/dl with a 9.50% increase in miscarriage incidence in women exposed to mercury in comparison to the unexposed group. For chromium, a 1.60% increase in the incidence of miscarriage in women exposed to chromium was reported. For cadmium and arsenic, 83.93% and 5.88% increase in incidence were reported respectively. Similar data were obtained for Jamaica (mercury = 7.29 ± 9.10 μg/l, Egypt (Cadmium = 1.17%; Lead = 32.33%. Conclusion: Medical practitioners and Toxicologists involved in women health in sub-Sahara Africa SSA should consider if these heavy metals can become additional biomarkers in the diagnosis of miscarriages and stillbirths.

  5. Heavy metals in Ratnapura alluvial gem sediments, Sri Lanka

    Science.gov (United States)

    Vithanage, M. S.; Hettiarachchi, J. K.; Rajapaksha, A. U.; Wijesekara, H.; Hewawasam, T.

    2011-12-01

    The valuable gems in Sri Lanka are found from the sedimentary gem deposits in Ratnapura District, which are found as alluvial deposits some are about >50 m deep. Gem bearing gravel layer is taken out from the mine, washed by panning to recover the gem minerals in the heavy mineral fraction, is a common practice in the gem mining area. Gem bearing sediment layer is associated with different heavy minerals in which different trace metals as Co, Cr, Cu, Al, Zr, Pb and As also can be present. During panning, the sediment is washed away and the heavy metals attached to the sediments are released into the environment. Hence we studied the lability and bioavailability of arsenic and other heavy metals from the gem sediments. Sediment samples were collected from 15 small scale gem mines (3 soil layers- top, gem mineral layer and layer below gem bearing gravel layer), air dried and sieved to obtain 150 mg/kg), Cu (>150 mg/kg), Pb (>400 mg/kg), Zn (>600 mg/kg) and Co ions (>100 mg/kg). Arsenite in the gem sediments were low and recorded as arsenic analysis is under investigation. Highest concentrations for bioavailable and exchangeable (leach to water) metals were Fe>Co>Zn>Mn>Ni>Cu>Pb. Sediments from few gem pits showed considerably high concentrations of metals analyzed. In some places Fe, Ni, Cu, Zn reported high in bioavailable fractions 70, 25, 20, 10 mg/kg respectively. Mobilization of these metals may increase due to changes in the pH and the presence of other ions in the environment. High concentrations of toxic metals in exchangeable and bioavailable fractions indicate the risk on plant and animals as well as the open water bodies and groundwater sources.

  6. Deep catalytic oxidation of heavy hydrocarbons on Pt/Al{sub 2}O{sub 3} catalysts; Oxydation catalytique totale des hydrocarbures lourds sur Pt/Al{sub 2}O{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Diehl, F.

    1998-12-09

    Deep oxidation by air on Pt supported on alumina of a large number of heavy hydrocarbons representative of those found in a real Diesel car exhaust has been studied. Light-off temperatures between 140 and 320 deg. C on 1%Pt/alumina (80% metal dispersion) have been found. Results show that not only the physical state around the conversion area but also the chemical nature of the hydrocarbon plays an important role. Heavy hydrocarbons deep oxidation behaviour has been classified as a function of their chemical category (alkane, alkene, aromatics etc..). Oxidation of binary mixtures of hydrocarbons has shown strong inhibition effects on n-alkane or CO oxidation by polycyclic compounds like 1-methyl-naphthalene. In some cases, by-product compounds in the gas effluent (other than CO{sub 2} and H{sub 2}O) have been identified by mass-spectrometry leading to oxidation mechanism proposals for different hydrocarbons. Catalyst nature (metal dispersion, content) influence has also been studied. It is shown that turn-over activity is favoured by the increase of the metal bulk size. Acidity influence of the carrier has shown only very little influence on n-alkane or di-aromatic compound oxidation. (author)

  7. Heavy metal contamination of soil and water in the vicinity of an abandoned e-waste recycling site: implications for dissemination of heavy metals.

    Science.gov (United States)

    Wu, Qihang; Leung, Jonathan Y S; Geng, Xinhua; Chen, Shejun; Huang, Xuexia; Li, Haiyan; Huang, Zhuying; Zhu, Libin; Chen, Jiahao; Lu, Yayin

    2015-02-15

    Illegal e-waste recycling activity has caused heavy metal pollution in many developing countries, including China. In recent years, the Chinese government has strengthened enforcement to impede such activity; however, the heavy metals remaining in the abandoned e-waste recycling site can still pose ecological risk. The present study aimed to investigate the concentrations of heavy metals in soil and water in the vicinity of an abandoned e-waste recycling site in Longtang, South China. Results showed that the surface soil of the former burning and acid-leaching sites was still heavily contaminated with Cd (>0.39 mg kg(-1)) and Cu (>1981 mg kg(-1)), which exceeded their respective guideline levels. The concentration of heavy metals generally decreased with depth in both burning site and paddy field, which is related to the elevated pH and reduced TOM along the depth gradient. The pond water was seriously acidified and contaminated with heavy metals, while the well water was slightly contaminated since heavy metals were mostly retained in the surface soil. The use of pond water for irrigation resulted in considerable heavy metal contamination in the paddy soil. Compared with previous studies, the reduced heavy metal concentrations in the surface soil imply that heavy metals were transported to the other areas, such as pond. Therefore, immediate remediation of the contaminated soil and water is necessary to prevent dissemination of heavy metals and potential ecological disaster.

  8. Identification and Quantification of Heavy Metals Concentrations in Pistacia

    Directory of Open Access Journals (Sweden)

    Gholamhossein DAVARYNEJAD

    2013-12-01

    Full Text Available The levels of heavy metals are very important in pistachio nuts, because the edible nuts have an important and increasing role in human nutrition. Pistachio is one of the native nuts of Iran which contains high genetic resources, but there is insufficient information regarding nutritional properties and other elements like heavy metals. The objective of the present study was to investigate and compare heavy metals contents in the kernels of various pistachio samples including; ‘Daneshmandi’, ‘Sephid’, ‘Garmeh’, ‘Momtaz’, ‘Ahmad Aghaei’, ‘Badami Zarand’, Pistacia atlantica Desf. (‘Baneh’, Pistacia vera ‘Sarakhs’ and chance seedling as ‘Non-grafted 1’, ‘Non-grafted 2’ and ‘Non-grafted 3’. Inductively coupled plasma emission spectrophotometer (ICP was used for the determination of aluminium, chromium, nickel, copper, strontium, arsenic, cadmium and cobalt concentrations in pistachio kernels. This study showed that there were significant differences among the samples in all measured heavy metals except the arsenic, cadmium and cobalt. The content of aluminium varied from 3.22 to 9.59 (mg kg-1 of dry matter and chromium concentration from 0.60 to 1.86 (mg kg-1 of dry matter. The nickel content of examined pistachio samples was found between 0.43 and 3.63 (mg kg-1 of dry matter and copper ranged from 3.20 to 12.33 (mg kg-1 of dry matter. The strontium content was observed between 4.96 and 24.93 (mg kg-1 of dry matter. The contents of arsenic, cadmium and cobalt not reported, because their amounts were lower than the detection limit of the applied measuring method (ICP. These data demonstrated that the concentrations of heavy metals in pistachios varied by cultivar.

  9. BIOREMEDIATION OF HEAVY METALS USING BIOSURFACTANT PRODUCING MICROORGANISMS

    Directory of Open Access Journals (Sweden)

    Vijayanand.S

    2015-05-01

    Full Text Available The present study was carried out to evaluate degradation of heavy metals in effluent waste water samples using microorganisms. The physical and chemical properties of the effluent samples were analyzed using standard methods. The soil sample collected from the heavy metal contaminated sites was subjected to serial dilution and streak-plating methods and six different strains were isolated from the samples. The activity of the isolates for hemolysis was studied on the Blood-Agar plates. The isolated strains were studied for its biochemical and morphological characteristics. The dark-blue colonies were observed by CTAB method, which confirmed the anionic bio surfactant produced by the isolate. The isolates were subjected to other screening tests like emulsification activity and oil displacement technique. These strains were used in the degradation of heavy metals present in the effluent waste water samples. The organism KDM 4 showed better degradation with 93.18% ability in reducing zinc when incubated for 72 hours and 86.36% when incubated for 24 hours in sample 3. The lead reduction was found to be 84.13% by the organism KDM3 when incubated at 37°C for 72 hours incubation. The chromium was reduced by the organism KDM 6 with 87.9% ability when incubated for 72 hours. The organisms had capacity to reduce the heavy metals depending on the factors like time and concentration of inoculum. As the time of incubation increases, more reduction was observed. The least amount of degradation was found in the organism KDM5 with only 27.08%. The percentage of reduction of heavy metals varies from one sample to another sample.

  10. [Concentration of heavy metals in pregnant women].

    Science.gov (United States)

    Jacyszyn, K; Walas, J; Malinowski, A; Latkowski, T; Cwynar, L

    1982-01-01

    Copper, zinc, and lead concentrations were measured in two groups 72 pregnant women. Twenty-one of them, making up the control group, lived and worked in Wrocław. The other 51 women, the second group, had lived more than five years in Lubin-Polkowice and worked in the local non-ferrous metal plants. They were particularly endangered by their exposure to copper, zinc, and lead concentrations. Pregnancy was normal in all cases. Maternal blood, umbilical cord blood, placenta homogenate, and amniotic fluid were examined by techniques of atom-absorption spectrometry. The metals tested were conspicuously absorbed by placental tissue, but no danger to the pregnant women could be established.

  11. A sensitive rapid on-site immunoassay for heavy metal contamination

    Energy Technology Data Exchange (ETDEWEB)

    Blake, R.; Blake, D.; Flowers, G.

    1996-05-02

    This project concerns the development of immunoassays for heavy metals that will permit the rapid on-site analysis of specific heavy metals, including lead and chromium in water and soil samples. 2 refs.

  12. Changes in soil properties and plant uptake of heavy metals on ...

    African Journals Online (AJOL)

    Administrator

    Full Length Research Paper. Changes in soil ... In a study to evaluate the contributions of open municipal waste dump to soil heavy metals ... Key words: Heavy metal contamination, seasonal changes, soil pH, soil texture, specific adsorption.

  13. Heavy metal removal from waste waters by ion flotation.

    Science.gov (United States)

    Polat, H; Erdogan, D

    2007-09-05

    Flotation studies were carried out to investigate the removal of heavy metals such as copper (II), zinc (II), chromium (III) and silver (I) from waste waters. Various parameters such as pH, collector and frother concentrations and airflow rate were tested to determine the optimum flotation conditions. Sodium dodecyl sulfate and hexadecyltrimethyl ammonium bromide were used as collectors. Ethanol and methyl isobutyl carbinol (MIBC) were used as frothers. Metal removal reached about 74% under optimum conditions at low pH. At basic pH it became as high as 90%, probably due to the contribution from the flotation of metal precipitates.

  14. Recovery of alumina and some heavy metals from sulfate liquor

    Directory of Open Access Journals (Sweden)

    M.N. El Hazek

    2016-05-01

    Full Text Available The gibbsite bearing shale occurrence in the Paleozoic sedimentary sequence of SW Sinai, Egypt, was found to be associated with several metal values. From sulfate liquor prepared by proper leaching, the recovery of these metal values has been studied. Alumina was first separated in the form of potash alum followed by Cu-selective extraction by hydroxyoxime LIX-973N solvent. Then U recovery using an anionic exchange resin Amberlite IRA-400 was achieved. For the associated heavy metal Zn, it was subsequently extracted using di-2-ethylhexyl phosphoric acid. The relevant factors affecting the extraction process were adequately studied.

  15. Conversion of heavy aromatic hydrocarbons to valuable synthetic feed for steamcrackers

    Energy Technology Data Exchange (ETDEWEB)

    Cesana, A.; Dalloro, L.; Rivetti, F.; Buzzoni, R.; Bignazzi, R. [ENI S.p.A., Novara (Italy). Refining and Marketing Div.

    2007-07-01

    The scope of the present study was upgrading a set of heavy aromatic hydrocarbons mixtures whose commercial value ranks close to fuel oil and should become even lower in the next future because of the introduction of more stringent regulations on fuels, through hydro-conversion to a synthetic feed for steam-cracking. The resulting process provides an opportunity to improve the economic return of a steamcracking plant, offering the chance of converting low-value mixtures produced by the plant itself, such as fuel oil of cracking (FOK), saving an equivalent amount of naphtha. The method can also be used for converting pyrolysis gasoline (pygas). Although pygas has at present a fair commercial value, it could suffer a significant penalization in the future due to further limitations on total aromatic content in gasoline. Pygas hydro-conversion to a synthetic steam-cracking feedstock has been recently reported. Fractions from refinery, such as heavy distillates (e.g. Heavy Vacuum Gas Oil, VGO), deasphalted resides (DAO), or some FCC streams (e.g. LCO) resulted suitable and very attractive mixtures to be treated as well. No more than deasphalting was required as pretreatment of the feed mixture and only when the asphalts were >2%. Hetero-elements are often present in such kind of feeds at quite high concentrations, but no problems were observed due to the presence of sulphur and nitrogen, respectively, up to 15000 and 5500 ppm. (orig.)

  16. A review of heavy metal adsorption by marine algae

    Science.gov (United States)

    Pan, Jin-Fen; Lin, Rong-Gen; Ma, Li

    2000-09-01

    Accumulation of heavy metals by algae had been studied extensively for biomonitoring or bioremediation purposes. Having the advantages of low cost raw material, big adsorbing capacity, no secondary pollution, etc., algae may be used to treat industrial water containing heavy metals. The adsorption processes were carried out in two steps: rapid physical adsorption first, and then slow chemical adsorption. pH is the major factor influencing the adsorption. The Freundlich equation fitted very well the adsorption isotherms. The uptake decreased with increasing ionic strength. The principal mechanism of metallic cation sequestration involves the formation of complexes between a metal ion and functional groups on the surface or inside the porous structure of the biological material. The carboxyl groups of alginate play a major role in the complexation. Different species of algae and the algae of the same species may have different adsorption capacity. Their selection affinity for heavy metals was the major criterion for the screening of a biologic adsorbent to be used in water treatment. The surface complex formation model (SCFM) can solve the equilibrium and kinetic problems in the biosorption.

  17. Bismuth nanoparticles integration into heavy metal electrochemical stripping sensor.

    Science.gov (United States)

    Cadevall, Miquel; Ros, Josep; Merkoçi, Arben

    2015-08-01

    Between their many applications bismuth nanoparticles (BiNPs) are showing interest as pre-concentrators in heavy metals detection while being applied as working electrode modifiers used in electrochemical stripping analysis. From the different reported methods to synthesize BiNPs we are focused on the typical polyol method, largely used in these types of metallic and semi-metallic nanoparticles. This study presents the strategy for an easy control of the shape and size of BiNPs including nanocubes, nanosferes and triangular nanostructures. To improve the BiNP size and shape, different reducing agents (ethylene glycol or sodium hypophosphite) and stabilizers (polyvinyl pyrrolidone, PVP, in different amounts) have been studied. The efficiency of BiNPs for heavy metals analysis in terms of detection sensitivity while being used as modifiers of screen-printed carbon electrodes including the applicability of the developed device in real sea water samples is shown. A parallel study between the obtained nanoparticles and their performance in heavy metal sensing has been described in this communication.

  18. A REVIEW OF HEAVY METAL ADSORPTION BY MARINE ALGAE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Accumulation of heavy metals by algae had been studied extensively for biomonitoring or bioremediation purposes. Having the advantages of low cost raw material, big adsorbing capacity, no secondary pollution, etc., algae may be used to treat industrial water containing heavy metals. The adsorption processes were carried out in two steps: rapid physical adsorption first, and then slow chemical adsorption. pH is the major factor influencing the adsorption. The Freundlich equation fitted very well the adsorption isotherms. The uptake decreased with increasing ionic strength. The principal mechanism of metallic cation sequestration involves the formation of complexes between a metal ion and functional groups on the surface or inside the porous structure of the biological material. The carboxyl groups of alginate play a major role in the complexation. Different species of algae and the algae of the same species may have different adsorption capacity. Their selection affinity for heavy metals was the major criterion for the screening of a biologic adsorbent to be used in water treatment. The surface complex formation model (SCFM) can solve the equilibrium and kinetic problems in the biosorption.

  19. Heavy Metal Contamination of Popular Nail Polishes in Iran

    Directory of Open Access Journals (Sweden)

    Golnaz Karimi

    2015-06-01

    Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

  20. Plasma polymer-functionalized silica particles for heavy metals removal.

    Science.gov (United States)

    Akhavan, Behnam; Jarvis, Karyn; Majewski, Peter

    2015-02-25

    Highly negatively charged particles were fabricated via an innovative plasma-assisted approach for the removal of heavy metal ions. Thiophene plasma polymerization was used to deposit sulfur-rich films onto silica particles followed by the introduction of oxidized sulfur functionalities, such as sulfonate and sulfonic acid, via water-plasma treatments. Surface chemistry analyses were conducted by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy. Electrokinetic measurements quantified the zeta potentials and isoelectric points (IEPs) of modified particles and indicated significant decreases of zeta potentials and IEPs upon plasma modification of particles. Plasma polymerized thiophene-coated particles treated with water plasma for 10 min exhibited an IEP of less than 3.5. The effectiveness of developed surfaces in the adsorption of heavy metal ions was demonstrated through copper (Cu) and zinc (Zn) removal experiments. The removal of metal ions was examined through changing initial pH of solution, removal time, and mass of particles. Increasing the water plasma treatment time to 20 min significantly increased the metal removal efficiency (MRE) of modified particles, whereas further increasing the plasma treatment time reduced the MRE due to the influence of an ablation mechanism. The developed particulate surfaces were capable of removing more than 96.7% of both Cu and Zn ions in 1 h. The combination of plasma polymerization and oxidative plasma treatment is an effective method for the fabrication of new adsorbents for the removal of heavy metals.

  1. Bioleaching of heavy metals from sewage sludge: a review.

    Science.gov (United States)

    Pathak, Ashish; Dastidar, M G; Sreekrishnan, T R

    2009-06-01

    During the treatment of sewage, a huge volume of sludge is generated, which is disposed of on land as soil fertilizer/conditioner due to the presence of nitrogen, phosphorus, potassium and other nutrients. However, the presence of toxic heavy metals and other toxic compounds in the sludge restricts its use as a fertilizer. Over the years, bioleaching has been developed as an environmentally friendly and cost-effective technology for the removal of heavy metals from the sludge. The present paper gives an overview of the various bioleaching studies carried out in different modes of operation. The various important aspects such as pathogen destruction, odor reduction and metal recovery from acidic leachate also have been discussed. Further, a detailed discussion was made on the various technical problems associated with the bioleaching process, which need to be addressed while developing the process on a larger scale.

  2. Removal of heavy metals by hybrid electrocoagulation and microfiltration processes.

    Science.gov (United States)

    Keerthi; Vinduja, V; Balasubramanian, N

    2013-01-01

    This study is based on the investigation of the performance of electrocoagulation (EC), followed by the microfiltration process for heavy metal removal in synthetic model waste water containing Zn2+, Ni2+ and Cd2+ ions. Effects of initial concentration, current density and pH on metal removal were analysed to optimize the EC process. The optimized EC process was then integrated with dead-end microfiltration (MF) and was found that the hybrid process was capable of 99% removal of heavy metals. The cake layer formed over the membrane by the hybrid process was analysed through scanning electron microscope-energy-dispersive X-ray spectroscopy. The particle size analysis of the sludge formed during EC was done to investigate the fouling caused during the process.

  3. Biosynthetic regulation of phytochelatins, heavy metal-binding peptides.

    Science.gov (United States)

    Hirata, Kazumasa; Tsuji, Naoki; Miyamoto, Kazuhisa

    2005-12-01

    Phytochelatins (PCs) are heavy metal-binding peptides that play important roles in the detoxification of toxic heavy metals and the regulation of intracellular concentrations of essential metals in eukaryotes, including higher plants, fungi, and microalgae. Recently, PC synthase genes in higher plants and fission yeast have been identified and characterized, enabling molecular biological studies to unravel the mechanisms underlying PC synthesis. Moreover, recent routine database searches have unexpectedly identified genes that are similar to plant PC synthase genes in the genomes of worms and some prokaryotes. In this review, we introduce these recent advances in our understanding of the molecular mechanisms for PC biosynthesis and functions in order to supply basic information about the unique and attractive peptides applicable to various fields.

  4. Electrodialytic removal of heavy metals from different fly ashes. Influence of heavy metal speciation in the ashes

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Ottosen, Lisbeth M.; Villumsen, Arne

    2003-01-01

    Electrodialytic Remediation has recently been suggested as a potential method for removal of heavy metals from fly ashes. In this work electrodialytic remediation of three different fly ashes, i.e. two municipal solid waste incinerator (MSWI) fly ashes and one wood combustion fly ash was studied...

  5. Heavy Metal Stress and Some Mechanisms of Plant Defense Response

    Directory of Open Access Journals (Sweden)

    Abolghassem Emamverdian

    2015-01-01

    Full Text Available Unprecedented bioaccumulation and biomagnification of heavy metals (HMs in the environment have become a dilemma for all living organisms including plants. HMs at toxic levels have the capability to interact with several vital cellular biomolecules such as nuclear proteins and DNA, leading to excessive augmentation of reactive oxygen species (ROS. This would inflict serious morphological, metabolic, and physiological anomalies in plants ranging from chlorosis of shoot to lipid peroxidation and protein degradation. In response, plants are equipped with a repertoire of mechanisms to counteract heavy metal (HM toxicity. The key elements of these are chelating metals by forming phytochelatins (PCs or metallothioneins (MTs metal complex at the intra- and intercellular level, which is followed by the removal of HM ions from sensitive sites or vacuolar sequestration of ligand-metal complex. Nonenzymatically synthesized compounds such as proline (Pro are able to strengthen metal-detoxification capacity of intracellular antioxidant enzymes. Another important additive component of plant defense system is symbiotic association with arbuscular mycorrhizal (AM fungi. AM can effectively immobilize HMs and reduce their uptake by host plants via binding metal ions to hyphal cell wall and excreting several extracellular biomolecules. Additionally, AM fungi can enhance activities of antioxidant defense machinery of plants.

  6. Phytoremediation potential of Lemna minor L. for heavy metals.

    Science.gov (United States)

    Bokhari, Syeda Huma; Ahmad, Iftikhar; Mahmood-Ul-Hassan, Muhammad; Mohammad, Ashiq

    2016-01-01

    Phytoremediation potential of L. minor for cadmium (Cd), copper (Cu), lead (Pb), and nickel (Ni) from two different types of effluent in raw form was evaluated in a glass house experiment using hydroponic studies for a period of 31 days. Heavy metals concentration in water and plant sample was analyzed at 3, 10, 17, 24, and 31 day. Removal efficiency, metal uptake and bio-concentration factor were also calculated. Effluents were initially analyzed for physical, chemical and microbiological parameters and results indicated that municipal effluent (ME) was highly contaminated in terms of nutrient and organic load than sewage mixed industrial effluent (SMIE). Results confirmed the accumulation of heavy metals within plant and subsequent decrease in the effluents. Removal efficiency was greater than 80% for all metals and maximum removal was observed for nickel (99%) from SMIE. Accumulation and uptake of lead in dry biomass was significantly higher than other metals. Bio-concentration factors were less than 1000 and maximum BCFs were found for copper (558) and lead (523.1) indicated that plant is a moderate accumulator of both metals. Overall, L. minor showed better performance from SMIE and was more effective in extracting lead than other metals.

  7. Mechanism Analysis and Propagation Model of Heavy Metals Contamination in Urban Topsoil

    OpenAIRE

    Zhao-wei Wang; Yuan-biao Zhang; Zi-yue Chen; Ke-jia Li; Jia-lin Hu; Yu-jie Liu

    2013-01-01

    In order to further research on the polluting condition and spreading features of heavy metals in urban surface soil, this study makes statistical analysis on indexes of 8 heavy metal concentrations. Then Are GIS geo-statistical analyst was used for Kriging interpolation of each kind of heavy metal concentration before figuring out the spatial distribution. Firstly, heavy metal contamination was analyzed by single-element pollution evaluation and multi-element pollution evaluation, before rat...

  8. Review: Assessing potential dietary toxicity of heavy metals in selected vegetables and food crops

    Institute of Scientific and Technical Information of China (English)

    ISLAM Ejaz ul; YANG Xiao-e; HE Zhen-li; MAHMOOD Qaisar

    2007-01-01

    Heavy metals, such as cadmium, copper, lead, chromium and mercury, are important environmental pollutants,particularly in areas with high anthropogenic pressure. Their presence in the atmosphere, soil and water, even in traces can cause serious problems to all organisms, and heavy metal bioaccumulation in the food chain especially can be highly dangerous to human health. Heavy metals enter the human body mainly through two routes namely: inhalation and ingestion, ingestion being the main route of exposure to these elements in human population. Heavy metals intake by human populations through food chain has been reported in many countries. Soil threshold for heavy metal toxicity is an important factor affecting soil environmental capacity of heavy metal and determines heavy metal cumulative loading limits. For soil-plant system, heavy metal toxicity threshold is the highest permissible content in the soil (total or bioavailable concentration) that does not pose any phytotoxic effects or heavy metals in the edible parts of the crops does not exceed food hygiene standards. Factors affecting the thresholds of dietary toxicity of heavy metal in soil-crop system include: soil type which includes soil pH, organic matter content, clay mineral and other soil chemical and biochemical properties; and crop species or cultivars regulated by genetic basis for heavy metal transport and accumulation in plants. In addition, the interactions of soil-plant root-microbes play important roles in regulating heavy metal movement from soil to the edible parts of crops. Agronomic practices such as fertilizer and water managements as well as crop rotation system can affect bioavailability and crop accumulation of heavy metals, thus influencing the thresholds for assessing dietary toxicity of heavy metals in the food chain. This paper reviews the phytotoxic effects and bioaccumulation of heavy metals in vegetables and food crops and assesses soil heavy metal thresholds for potential dietary

  9. Some aspects of interactions between heavy metals and plant mineral nutrients

    OpenAIRE

    Anna Siedlecka

    2014-01-01

    Heavy metals are aggresive environmental pollutants. They are easily taken up by plants and they are strong stess factors for plant metabolism. Heavy metals influence includes also disturbances in plant mineral nutrition by competition with other nutrients. Typical symptoms of heavy metals toxicity are often similar or even the same like symptoms of some essential nutrients deficiency. The aim of this paper is to discuss mechanisms of some heavy metals uptake and possible ways of their influe...

  10. Heavy metal speciation and toxicity characteristics of tannery sludge

    Science.gov (United States)

    Juel, Md. Ariful Islam; Chowdhury, Zia Uddin Md.; Ahmed, Tanvir

    2016-07-01

    Heavy metals present in tannery sludge can get mobilized in the environment in various forms and can be a cause for concern for the natural ecosystem and human health. The speciation of metals in sludge provides valuable information regarding their toxicity in the environment and determines their suitability for land application or disposal in landfills. Concentrations of seven heavy metals (Cr, Pb, Cd, Ni, Zn, As and Cu) in tannery sludge were determined to evaluate their toxicity levels. Metal contents ranged over the following intervals: As: 1.52-2.07 mg/kg; Pb: 57.5-67 mg/kg; Cr: 15339-26501 mg/kg; Cu: 261.3-579.5 mg/kg; Zn: 210.2-329.1 mg/kg and Ni: 137.5-141.3 mg/kg (dry weight basis). The concentrations of all heavy metals in the sludge samples were lower compared to EPA guidelines except chromium which was found to be several orders of magnitude higher than the guideline value. Toxicity Characteristics Leaching Procedure (TCLP) test indicated that the leaching potential of chromium was higher compared to the other heavy metals and exceeded the EPA land disposal restriction limits. To quantitatively assess the environmental burden of the chromium associated with tannery sludge, the IMPACT 2002+ methodology was adopted under the SimaPro software environment. Considering the USEPA limit for chromium as the baseline scenario, it was found that chromium in the tannery sludge had 6.41 times higher impact than the baseline in the categories of aquatic ecotoxicity, terrestrial ecotoxicity and non-carcinogens. Chromium has the highest contribution to toxicity in the category of aquatic ecotoxicity while copper is the major contributor to the category of terrestrial ecotoxicity in the tannery sludge.

  11. Multiple metal resistant transferable phenotypes in bacteria as indicators of soil contamination with heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, R.P.; Ryan, D.J.; Dowling, D.N. [Dept. of Science and Health, Inst. of Tech. Carlow, Carlow (Ireland)

    2005-07-01

    Environmental contamination by heavy metals affects microbial communities. The number of single and multiple heavy metal resistant bacteria may be an indicator of the level of contamination. This paper details the isolation and characterisation of metal resistant microorganisms isolated from rhizosphere/soil samples obtained from an abandoned zinc, lead and copper mine and a local unaffected site. This data was compared to the level of heavy metal in the soils to establish the effect of metals on the microbial community and to determine the relationship between pollutant levels and resistant strains. This paper outlines the diversity of transferable resistance determinants between both sites and details the levels of heavy metal resistant bacteria and those expressing transferable multiple heavy metal tolerance. Methods. The sample sites were located in Co. Galway, Ireland. The first sample site (site A) was a former lead, zinc and copper mine, which was closed in 1961 due to exhaustion of ore. The second site (site B) was located two and a half kilometres from the mining site and was not affected by the mining operations. Composite soil samples were characterised for general soil matrix composition, organic content, pH and general chemical parameters. The soil was also enumerated for the total viable heterotrophic counts and tested on Pseudomonas selective agar (PSA) for total Pseudomonas counts and Sucrose Asparagine (SA), which is semi-selective for fluorescent Pseudomonas. (orig.)

  12. The Predisposition of Iraqi Rice Husk to Remove Heavy Metals from Aqueous Solutions and Capitalized from Waste Residue

    Directory of Open Access Journals (Sweden)

    Mohammed Nsaif

    2013-12-01

    Full Text Available This study is deal with study the potential of Iraqi Rice Husk (IRH on the removal of three heavy metals pollutant which were (Mg, Mn and Mo ions from industrial wastewater using different design parameters by adsorption process. Results show that the removal efficiency were (93.95, 97.18 and 95.26 % for heavy metal (Mg, Mn and Mo respectively from aquatic solution decreased with increasing of initial concentration and flow rate while the removal efficiency increased with increasing absorbance material bed height, pH and feeding temperature. Statistical model is achieved to find an expression relates the overall operating parameters with the removal efficiency for each metal ions used in this investigation in a general equation (each one alone. The samples of (IRH remaining after using it in the removal of (Mg, Mn and Mo heavy metal ions above from Simulated Synthetic Aqueous Solutions (SSAS to investigate the capitalized of it in different methods. Different benefits possess which are: remove the three toxic heavy metals ions contaminated the water, get rid of agricultural waste (IRH, in the same time, produce light and more benefit hydrocarbons from n-heptane isomerization using a type Y-zeolite catalyst synthesis from remaining (IRH and prepare a cheap and active rodenticide.

  13. Active biomonitoring of heavy metal pollution using Rosa rugosa plants

    Energy Technology Data Exchange (ETDEWEB)

    Calzoni, Gian Lorenzo [Dip. Biologia, Universita di Bologna, via Irnerio 42, 40126 Bologna (Italy)], E-mail: gianlorenzo.calzoni@unibo.it; Antognoni, Fabiana [Dip. Biologia, Universita di Bologna, via Irnerio 42, 40126 Bologna (Italy)], E-mail: fabiana.antognoni@unibo.it; Pari, Elena [Gruppo CSA-SpA, via al Torrente 22, Rimini (Italy)], E-mail: epari@csaricerche.com; Fonti, Paolo [Gruppo CSA-SpA, via al Torrente 22, Rimini (Italy)], E-mail: pfonti@csaricerche.com; Gnes, Antonio [ARPA - Agenzia Regionale Protezione Ambientale, Sez. Provinciale di Ravenna, via Alberoni 17, Ravenna (Italy)], E-mail: agnes@ra.arpa.emr.it; Speranza, Anna [Dip. Biologia, Universita di Bologna, via Irnerio 42, 40126 Bologna (Italy)], E-mail: anna.speranza@unibo.it

    2007-09-15

    The purpose of this work was to evaluate the quality of a rural area near Faenza (Italy) by using an active biomonitoring approach, i.e., by placing homogeneous individuals of the perennial shrub Rosa rugosa in different sites throughout the area. Further sites, within the city or its environs, were used for comparison. Soil and leaves of R. rugosa were analyzed for their heavy metal content. The total heavy metal pattern of leaves closely paralleled the pattern registered in soil, with the highest content (both in total and assimilable forms) at the site in the urban area, which is exposed to heavy traffic. Pollen quality (abortiveness and viability) was also tested as a potential indicator of pollution. Pollen abortiveness was strictly related to Pb levels in leaves, while viability was inversely related to leaf Cr content. Our results suggest that R. rugosa has the potential to be a good biomonitoring system. - Rosa rugosa leaves and pollen are - to different extents - suitable monitoring tools for heavy metal pollution.

  14. Beneficial role of bacterial endophytes in heavy metal phytoremediation.

    Science.gov (United States)

    Ma, Ying; Rajkumar, Mani; Zhang, Chang; Freitas, Helena

    2016-06-01

    Phytoremediation is an emerging technology that uses plants and their associated microbes to clean up pollutants from the soil, water and air. In recent years, phytoremediation assisted by bacterial endophytes has been highly recommended for cleaning up of metal polluted soils since endophytic bacteria can alleviate metal toxicity in plant through their own metal resistance system and facilitate plant growth under metal stress. Endophytic bacteria improve plant growth in metal polluted soils in two different ways: 1) directly by producing plant growth beneficial substances including solubilization/transformation of mineral nutrients (phosphate, nitrogen and potassium), production of phytohormones, siderophores and specific enzymes; and 2) indirectly through controlling plant pathogens or by inducing a systemic resistance of plants against pathogens. Besides, they also alter metal accumulation capacity in plants by excreting metal immobilizing extracellular polymeric substances, as well as metal mobilizing organic acids and biosurfactants. The present work aims to review the progress of recent research on the isolation, identification and diversity of metal resistant endophytic bacteria and illustrate various mechanisms responsible for plant growth promotion and heavy metal detoxification/phytoaccumulation/translocation in plants.

  15. Considering bioavailability in the remediation of heavy metal contaminated sites

    Directory of Open Access Journals (Sweden)

    Leita L.

    2013-04-01

    Full Text Available Many years of research have demonstrated that instead of the total concentration of metals in soil, bioavailability is the key to understand the environmental risk derived by metals, since adverse effects are related only to the biologically available forms of these elements. The knowledge of bioavailability can decrease the uncertainties in evaluating exposure in human and ecological risk assessment. At the same time, the efficiency of remediation treatments could be greatly influenced by availability of the contaminants. Consideration of the bioavailability processes at contaminated sites could be useful in site-specific risk assessment: the fraction of mobile metals, instead of total content should be provided as estimates of metal exposure. Moreover, knowledge of the chemical forms of heavy metals in soils is a critical component in the evaluation of applicability of different remediation technologies such as phytoremdiation or soil washing.

  16. Ecological risk and pollution history of heavy metals in Nansha mangrove, South China.

    Science.gov (United States)

    Wu, Qihang; Tam, Nora F Y; Leung, Jonathan Y S; Zhou, Xizhen; Fu, Jie; Yao, Bo; Huang, Xuexia; Xia, Lihua

    2014-06-01

    Owing to the Industrial Revolution in the late 1970s, heavy metal pollution has been regarded as a serious threat to mangrove ecosystems in the region of the Pearl River Estuary, potentially affecting human health. The present study attempted to characterize the ecological risk of heavy metals (Cd, Cr, Cu, Mn, Ni, Pb and Zn) in Nansha mangrove, South China, by estimating their concentrations in the surface sediment. In addition, the pollution history of heavy metals was examined by determining the concentrations of heavy metals along the depth gradient. The phytoremediation potential of heavy metals by the dominant plants in Nansha mangrove, namely Sonneratia apetala and Cyperus malaccensis, was also studied. Results found that the surface sediment was severely contaminated with heavy metals, probably due to the discharge of industrial sewage into the Pearl River Estuary. Spatial variation of heavy metals was generally unobvious. The ecological risk of heavy metals was very high, largely due to Cd contamination. All heavy metals, except Mn, decreased with depth, indicating that heavy metal pollution has been deteriorating since 1979. Worse still, the dominant plants in Nansha mangrove had limited capability to remove the heavy metals from sediment. Therefore, we propose that immediate actions, such as regulation of discharge standards of industrial sewage, should be taken by the authorities concerned to mitigate the ecological risk posed by heavy metals. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Heavy metals in garden soils along roads in Szeged, Hungary

    Science.gov (United States)

    Szolnoki, Zsuzsanna; Farsang, Andrea

    2010-05-01

    The soils of the urban environment, owing to the various anthropogenic activities, can be contaminated by heavy metals. The traffic is well-known for more decades to be main source of heavy metals mostly in cities. The accumulation of these elements can have different effects, either directly endangering the natural soil functions, or indirectly endangering the biosphere by bio-accumulation and inclusion in the food chain. The hobby gardens and the vegetable gardens directly along roads can be potential risky for people since unknown amount of heavy metals can be accumulated into organization of local residents due to consumption of vegetables and fruits grown in their own garden. The aim of this study was to determine the heavy metal content of garden soils directly along roads with heavy traffic in order to assess possible risk for human health. The total content and the mobile content of Cd, Co, Cr, Cu, Ni, Pb and Zn have been determined in samples from garden soils along 5 busy roads of Szeged, South Hungary. Enrichment factor has been calculated with the help of control soil samples far from roads. The soil properties basically influencing on metal mobility have also been examined. Finally, the human health risk of these garden soils has been modelled by determination of health risk quotient (HRQ). As a result of our investigations, it can be claimed that mostly Cu, Zn and to a lesser degree the Ni, Cr and Pb accumulated in garden soils along roads depending on the traffic density. In general, the topsoils (0-10 cm) had higher amount of these metals rather than the subsoils (40-50 cm). Ni of these metals has approached; Cu has exceeded limit value while Pb is under it. Cd is very high in both soils along roads and control ones far from roads. Garden soils along the roads have such basic soil parameters (pH, mechanical soil type, humus content) that prove fairly high metal-binding capacity for these soils. Total risk of usage of these gardens (ingestion of soil

  18. Foliar heavy metal uptake, toxicity and detoxification in plants: A comparison of foliar and root metal uptake.

    Science.gov (United States)

    Shahid, Muhammad; Dumat, Camille; Khalid, Sana; Schreck, Eva; Xiong, Tiantian; Niazi, Nabeel Khan

    2017-03-05

    Anthropologic activities have transformed global biogeochemical cycling of heavy metals by emitting considerable quantities of these metals into the atmosphere from diverse sources. In spite of substantial and progressive developments in industrial processes and techniques to reduce environmental emissions, atmospheric contamination by toxic heavy metals and associated ecological and health risks are still newsworthy. Atmospheric heavy metals may be absorbed via foliar organs of plants after wet or dry deposition of atmospheric fallouts on plant canopy. Unlike root metal transfer, which has been largely studied, little is known about heavy metal uptake by plant leaves from the atmosphere. To the best of our understanding, significant research gaps exist regarding foliar heavy metal uptake. This is the first review regarding biogeochemical behaviour of heavy metals in atmosphere-plant system. The review summarizes the mechanisms involved in foliar heavy metal uptake, transfer, compartmentation, toxicity and in plant detoxification. We have described the biological and environmental factors that affect foliar uptake of heavy metals and compared the biogeochemical behaviour (uptake, translocation, compartmentation, toxicity and detoxification) of heavy metals for root and foliar uptake. The possible health risks associated with the consumption of heavy metal-laced food are also discussed. Copyright © 2016. Published by Elsevier B.V.

  19. Interaction of heavy metals and pyrene on their fates in soil and tall fescue (Festuca arundinacea).

    Science.gov (United States)

    Lu, Mang; Zhang, Zhong-Zhi; Wang, Jing-Xiu; Zhang, Min; Xu, Yu-Xin; Wu, Xue-Jiao

    2014-01-21

    90-Day growth chamber experiments were performed to investigate the interactive effect of pyrene and heavy metals (Cu, Cd, and Pb) on the growth of tall fescue and its uptake, accumulation, and dissipation of heavy metals and pyrene. Results show that plant growth and phytomass production were impacted by the interaction of heavy metals and pyrene. They were significantly decreased with heavy metal additions (100-2000 mg/kg), but they were only slightly declined with pyrene spiked up to 100 mg/kg. The addition of a moderate dosage of pyrene (100 mg/kg) lessened heavy metal toxicity to plants, resulting in enhanced plant growth and increased metal accumulation in plant tissues, thus improving heavy metal removal by plants. In contrast, heavy metals always reduced both plant growth and pyrene dissipation in soils. The chemical forms of Cu, Cd, and Pb in plant organs varied with metal species and pyrene addition. The dissipation and mineralization of pyrene tended to decline in both planted soil and unplanted soils with the presence of heavy metals, whereas they were enhanced with planting. The results demonstrate the complex interactive effects of organic pollutants and heavy metals on phytoremediation in soils. It can be concluded that, to a certain extent, tall fescue may be useful for phytoremediation of pyrene-heavy metal-contaminated sites. Further work is needed to enhance methods for phytoremediation of heavy metal-organics co-contaminated soil.

  20. Insights into the superhydrophobicity of metallic surfaces prepared by electrodeposition involving spontaneous adsorption of airborne hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Peng; Cao, Ling; Zhao, Wei; Xia, Yue; Huang, Wei; Li, Zelin, E-mail: lizelin@hunnu.edu.cn

    2015-01-01

    Graphical abstract: - Highlights: • Several superhydrophobic metallic surfaces were fabricated by fast electrodeposition. • Both micro/nanostructures and adsorption of airborne hydrocarbons make contributions. • XPS analyses confirm presence of airborne hydrocarbons on these metallic surfaces. • The adsorption of airborne hydrocarbons on the clean metal Au surface was very quick. • UV-O{sub 3} treatment oxidized the hydrocarbons to hydrophilic oxygen-containing organics. - Abstract: Electrochemical fabrication of micro/nanostructured metallic surfaces with superhydrophobicity has recently aroused great attention. However, the origin still remains unclear why smooth hydrophilic metal surfaces become superhydrophobic by making micro/nanostructures without additional surface modifications. In this work, several superhydrophobic micro/nanostructured metal surfaces were prepared by a facile one-step electrodeposition process, including non-noble and noble metals such as copper, nickel, cadmium, zinc, gold, and palladium with (e.g. Cu) or without (e.g. Au) surface oxide films. We demonstrated by SEM and XPS that both hierarchical micro/nanostructures and spontaneous adsorption of airborne hydrocarbons endowed these surfaces with excellent superhydrophobicity. We revealed by XPS that the adsorption of airborne hydrocarbons at the Ar{sup +}-etched clean Au surface was rather quick, such that organic contamination can hardly be prevented in practical operation of surface wetting investigation. We also confirmed by XPS that ultraviolet-O{sub 3} treatment of the superhydrophobic metal surfaces did not remove the adsorbed hydrocarbons completely, but mainly oxidized them into hydrophilic oxygen-containing organic substances. We hope our findings here shed new light on deeper understanding of superhydrophobicity for micro/nanostructured metal surfaces with and without surface oxide films.

  1. Nematodes as bioindicators of soil degradation due to heavy metals.

    Science.gov (United States)

    Šalamún, Peter; Renčo, Marek; Kucanová, Eva; Brázová, Tímea; Papajová, Ingrid; Miklisová, Dana; Hanzelová, Vladimíra

    2012-11-01

    The effect of distance from a heavy metal pollution source on the soil nematode community was investigated on four sampling sites along an 4 km transect originating at the Kovohuty a.s. Krompachy (pollution source). The soil nematode communities were exposed to heavy metal influence directly and through soil properties changes. We quantified the relative effects of total and mobile fraction of metals (As, Cd, Cr, Cu, Pb, and Zn) on soil ecosystem using the nematode community structure (trophic and c-p groups,) and ecological indices (Richness of genera, H', MI2-5, etc.). Pollution effects on the community structure of soil free living nematodes was found to be the highest near the pollution source, with relatively low population density and domination of insensitive taxa. A decrease in heavy metals contents along the transect was linked with an increase in complexity of nematode community. The majority of used indices (MI2-5, SI, H') negatively correlated (P bioindication of contamination and could be used as an alternative to the common approaches based on chemical methods.

  2. Heavy Metal Pollution and Chemical Profile of Cauvery River Water

    Directory of Open Access Journals (Sweden)

    Abida Begum

    2009-01-01

    Full Text Available Analysis of water, plankton, fish and sediment reveals that the Cauvery River water in the downstream is contaminated by certain heavy metals. Water samples have high carbonate hardness. Concentrations of all elements and ions increase in the downstream. Main ions are in the following order: Na > HCO3 >Mg > K > Ca> Cl > SO4. Heavy metal concentration in water was Cr >Cu ≈ Mn > Co > Ni > Pb > Zn, in fish muscles Cr > Mn > Cu > Ni > Co > Pb ≈ Zn, in phytoplanktens Co > Zn > Pb > Mn > Cr and in the sediments the heavy metal concentration was Co > Cr > Ni ≈ Cu > Mn > Zn > Pb. Although, the quality of Cauvery River may be classified as very good based on the salt and sodium for irrigation, Zn, Pb and Cr concentration exceeded the upper limit of standards. Metal concentrations in the downstream indicate an increase in the pollution load due to movement of fertilizers, agricultural ashes, industrial effluents and anthropogenic wastes. An immediate attention from the concerned authorities is required in order to protect the river from further pollution.

  3. Plant response to air pollution by heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, Y.; Mitsuki, H.; Takata, N.

    1975-01-01

    The effect of air pollutants on the concentration of heavy metals in leaves of trees in the neighborhood of a steel factory was studied. Paulownia trees, which absorb and accumulate heavy metals better than other trees, were sampled in the middle of November. The concentration of heavy metals in the soil was measured for every 10 cm vertically downward to a depth of 80 cm near the roots of the sample trees. The concentrations of iron and manganese in the dust were 34.6 to 57.8% and 0.41 to 3.21%, respectively, mainly in oxidized form. The amounts of these metals discharged from the factories were calculated from the concentrations in the atmosphere. Tree leaves in the polluted area were analyzed to determine the route of atmospheric iron from the source to the atmosphere to the soil, where it is absorbed by the roots to accumulate in the leaves. The concentration of Mn in soil exponentially decreases with distance from the source, but its concentration in tree leaves increases with distance. 4 figures.

  4. Competitive adsorption of dyes and heavy metals on zeolitic structures.

    Science.gov (United States)

    Hernández-Montoya, V; Pérez-Cruz, M A; Mendoza-Castillo, D I; Moreno-Virgen, M R; Bonilla-Petriciolet, A

    2013-02-15

    The adsorption of Acid blue 25, basic blue 9, basic violet 3, Pb(2+), Ni(2+), Zn(2+) and Cd(2+) ions has been studied in single and dye-metal binary solutions using two mineral materials: Clinoptilolite (CL) and ER (Erionite). These zeolites were characterized by FT-IR spectroscopy; potentiometric titration and nitrogen adsorption isotherms at 77 K to obtain their textural parameters. Results indicated that ER has an acidic character and a high specific surface (401 m(2) g(-1)) in contrast with the zeolite CL (21 m(2) g(-1)). Surprisingly, the removal of dyes was very similar for the two zeolites and they showed a considerable selectivity by the basic dyes in comparison with the acid dyes. In the case of heavy metals, ER was more effective in the adsorption process showing a selectivity of: Pb(2+) > Ni(2+) > Zn(2+) > Cd(2+). In the multicomponent adsorption experiments an antagonistic effect was observed in the removal of basic dyes and heavy metals. Particularly, the adsorbed amount of basic violet 3 decreased more significantly when the heavy metals are presents in contrast with the basic blue 9. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Diazotrophs-assisted phytoremediation of heavy metals: a novel approach.

    Science.gov (United States)

    Ullah, Abid; Mushtaq, Hafsa; Ali, Hazrat; Munis, Muhammad Farooq Hussain; Javed, Muhammad Tariq; Chaudhary, Hassan Javed

    2015-02-01

    Heavy metals, which have severe toxic effects on plants, animals, and human health, are serious pollutants of the modern world. Remediation of heavy metal pollution is utmost necessary. Among different approaches used for such remediation, phytoremediation is an emerging technology. Research is in progress to enhance the efficiency of this plant-based technology. In this regard, the role of rhizospheric and symbiotic microorganisms is important. It was assessed by enumeration of data from the current studies that efficiency of phytoremediation can be enhanced by assisting with diazotrophs. These bacteria are very beneficial because they bring metals to more bioavailable form by the processes of methylation, chelation, leaching, and redox reactions and the production of siderophores. Diazotrophs also posses growth-promoting traits including nitrogen fixation, phosphorous solubilization, phytohormones synthesis, siderophore production, and synthesis of ACC-deaminase which may facilitate plant growth and increase plant biomass, in turn facilitating phytoremediation technology. Thus, the aim of this review is to highlight the potential of diazotrophs in assisting phytoremediation of heavy metals in contaminated soils. The novel current assessment of literature suggests the winning combination of diazotroph with phytoremediation technology.

  6. Pathogens and Heavy Metals Concentration in Green Leafy Vegetables

    Directory of Open Access Journals (Sweden)

    Abida Begum

    2010-01-01

    Full Text Available Presence of heavy metal and bacterial pathogen in randomly collected samples of green leafy from various stations of Bengaluru city was detected. Heavy metals (cadmium, zinc, copper, iron, chromium, nickel and lead were analyzed by tri-acid digestion method. The presence of heavy metals in general was in the order of Cd>Zn>Cu>Fe>Cr>Pb. Trace metal concentration in all green leafy vegetables of stations 1-5 were within permissible limit and it has been exceeded in station 6-10. This indicated high levels of soil contamination pose potential danger for the vegetables grown in the vicinity of Arakere lake, Bannerghatta road, Gottigere lake, Naganaikanakere, Bommasandra lake, Hulimavu lake, Kelaginakere and Amblipura lake. The total bacteria and coliforms were enumerated on TSA (Tryptone Soya Agar and VRBA (Violet Red Bile Agar media respectively. The total bacterial count in randomly collected samples of coriander ranged from 296 cfu/g to 8 cfu/g, in palak from 16 cfu/g to 0.9 cfu/g, whereas in case of cabbage was 104 cfu/g to 0.9 cfu/g which is an indication of improper pre-harvest and post harvest handling.

  7. Extraction of heavy metals from soils using biodegradable chelating agents.

    Science.gov (United States)

    Tandy, Susan; Bossart, Karin; Mueller, Roland; Ritschel, Jens; Hauser, Lukas; Schulin, Rainer; Nowack, Bernd

    2004-02-01

    Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.

  8. Perspectives of plant-associated microbes in heavy metal phytoremediation.

    Science.gov (United States)

    Rajkumar, M; Sandhya, S; Prasad, M N V; Freitas, H

    2012-01-01

    "Phytoremediation" know-how to do-how is rapidly expanding and is being commercialized by harnessing the phyto-microbial diversity. This technology employs biodiversity to remove/contain pollutants from the air, soil and water. In recent years, there has been a considerable knowledge explosion in understanding plant-microbes-heavy metals interactions. Novel applications of plant-associated microbes have opened up promising areas of research in the field of phytoremediation technology. Various metabolites (e.g., 1-aminocyclopropane-1-carboxylic acid deaminase, indole-3-acetic acid, siderophores, organic acids, etc.) produced by plant-associated microbes (e.g., plant growth promoting bacteria, mycorrhizae) have been proposed to be involved in many biogeochemical processes operating in the rhizosphere. The salient functions include nutrient acquisition, cell elongation, metal detoxification and alleviation of biotic/abiotic stress in plants. Rhizosphere microbes accelerate metal mobility, or immobilization. Plants and associated microbes release inorganic and organic compounds possessing acidifying, chelating and/or reductive power. These functions are implicated to play an essential role in plant metal uptake. Overall the plant-associated beneficial microbes enhance the efficiency of phytoremediation process directly by altering the metal accumulation in plant tissues and indirectly by promoting the shoot and root biomass production. The present work aims to provide a comprehensive review of some of the promising processes mediated by plant-associated microbes and to illustrate how such processes influence heavy metal uptake through various biogeochemical processes including translocation, transformation, chelation, immobilization, solubilization, precipitation, volatilization and complexation of heavy metals ultimately facilitating phytoremediation. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Bioremediation of toxic heavy metals using acidothermophilic autotrophes.

    Science.gov (United States)

    Umrania, Valentina V

    2006-07-01

    Investigations were carried out to isolate microbial strains from soil, mud and water samples from metallurgically polluted environment for bioremediation of toxic heavy metals. As a result of primary and secondary screening various 72 acidothermophilic autotrophic microbes were isolated and adapted for metal tolerance and biosorption potentiality. The multi-metal tolerance was developed with higher gradient of concentrations of Ag, As, Bi, Cd, Cr, Co, Cu, Hg, Li, Mo, Pb, Sn and Zn. The isolates were checked for their biosolubilization ability with copper containing metal sulfide ores. In case of chalcopyrite 85.82% and in covellite as high as 97.5% copper solubilization occurred in presence of 10(-3) M multi-heavy metals on fifth day at 55 degrees C and pH 2.5. Chemical analyses were carried out by inductively coupled plasma spectroscopy (ICP) for metal absorption. The selected highly potential isolate (ATh-14) showed maximum adsorption of Ag 73%, followed by Pb 35%, Zn 34%, As 19%, Ni 15% and Cr 9% in chalcopyrite.

  10. Plants accumulating heavy metals in the Danube River wetlands.

    Science.gov (United States)

    Matache, Marius L; Marin, Constantin; Rozylowicz, Laurentiu; Tudorache, Alin

    2013-12-20

    We present herein our results regarding the accumulation of four heavy metals (copper, cadmium, lead, and zinc) in four aquatic species plants (Ceratophyllum demersum, Potamogeton pectinatus, Potamogeton lucens, Potamogeton perfoliatus) collected from the Danube River, South-Western part of Romania and their possible use as indicators of aquatic ecosystems pollution with heavy metals. Elements concentration from the vegetal material was determined through Inductively Coupled Plasma - Mass Spectrometry. The species were chosen based on their previous use as bioindicators in aquatic ecosystems and due to the fact they are one of the most frequent aquatic plant species of the Danube River ecosystems within the Iron Gates Natural Park. Highest amounts are recorded for Ceratophyllum demersum (3.52 μg/g for Cd; 22.71 μg/g for Cu; 20.06 μg/g for Pb; 104.23 μg/g for Zn). Among the Potamogeton species, the highest amounts of heavy metals are recorded in Potamogeton perfoliatus (1.88 μg/g for Cd; 13.14 μg/g for Cu; 13.32 μg/g for Pb; 57.96 μg/g for Zn). The sequence for the bioconcentration factors (BCFs) calculated in order to describe the accumulation of the four metals is Cd > Zn > Pb > Cu. Increase of the zinc concentration determines an increase of the cadmium concentration (Spearman rho=0.40, p=0.02). Despite the low ambiental levels of heavy metals, the four aquatic plants have the ability to accumulate significant amounts, which make them useful as biological indicators. BCF value for Ceratophyllum demersum indicated this species as a cadmium hyperaccumulator.

  11. Characterization of Heavy metals from banana farming soils

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Dian; Huang, Cheng He; Huang, Dong Yi [College of Agronomy, Hainan University, Haikou City, Hainan Province (China); Ouyang, Ying [Department of Water Resources, St. Johns River Water Management District, Palatka, FL (United States)

    2010-06-15

    There is a growing public concern about the contamination of heavy metals in agricultural soils in China due to the increasingly applications of chemical fertilizers and pesticides during the last two decades. This study characterized the variability of heavy metals, including copper (Cu), zinc (Zn), lead (Pb), cadmium (Cd), and nickel (Ni), from the banana farming soils in western Hainan Island, China. Five banana farms from different locations in the island were selected to collect 69 mixed-soil samples in this study. Experimental data showed that concentrations of Cu ranged from 3.38 to 54.52, Zn from 24.0 to 189.8, Pb from 15.98 to 58.42, Cd from 0.43 to 3.21, and Ni from 3.47 to 121.86 mg kg{sup -1} dry wt. In general, concentrations of the heavy metals varied with metal species and changed from location to location, which occurred presumably due to the variations of soil parent materials and to a certain extent due to the use of different types of agrochemicals. Our study further revealed that concentrations of Cu and Zn were higher in the banana farming soils than in the natural (control) soils among all of the five locations, whereas mixed results were observed for Pb, Cd, and Ni in both the banana farming and control soils, depending on the locations. Comparisons of the heavy metal concentrations with the Chinese Soil Quality Standards (CSQSs) showed that Cu, Zn, and Pb contents were lower but Cd and Ni contents were higher in the banana farming soils than the Class II standard of the CSQSs. Results suggested that accumulation of Cu, Zn, and Pb in the soils is safe for banana fruit production, whereas accumulation of Cd and Ni in the same soils could potentially pose threats to banana fruit safety. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  12. Heavy metals distribution in sediments of Nador lagoon (Morocco)

    Science.gov (United States)

    Bloundi, K.; Duplay, J.

    2003-04-01

    The Nador lagoon is a paralic system, located North-East of Morocco. At the present time this ecosystem undergoes an anthropic stress induced by urban, industrial and agricultural releases, and also by fishery activity which enriches this ecosystem in organic and inorganic wastes. A geochemical study has been undertaken, first to define the areas contaminated by heavy metals (Zn, Cu, Co, Cr and V), and second to caracterize the different mineral phases, which trap these elements. Sediment samples were collected on twenty-eight stations scattered all over the lagoon, and each core (30 cm) was subdivided in two horizons (surface and depth). Mineralogical analyses as well as major and trace elements analyses were performed on surface and deep sediments. The results on major element analyses (Si, Al, Ca, Mg, Na, P) show an enrichment in halite and phosphates in the surface sediments. This highlights on one hand, low water exchange rates between the lagoon and the Mediterranean sea, and on the other hand, an increase in organic releases related to the urban, agricultural and fishery activities. The highest concentrations in inorganic micro-pollutant were recorded N-E of the lagoon and close to Nador city. With reference to the geochemical background, it can be concluded that there is a slight contamination in heavy metals. Moreover, enrichment factor calculations (EF) for heavy metals point out an increase in metal elements as following: Zn>Co>Cr>V>Cu. Sequential extractions were performed to determine the behaviour of these micro-pollutants. Thus, it was shown that carbonates, oxides and phosphates are the preferential mineral phases for trapping these heavy metals.

  13. Chemometric interpretation of heavy metal patterns in soils worldwide.

    Science.gov (United States)

    Skrbić, Biljana; Durisić-Mladenović, Natasa

    2010-09-01

    Principal component analysis (PCA) was applied on data sets containing levels of six heavy metals (Pb, Cu, Zn, Cd, Ni, Cr) in soils from different parts of the world in order to investigate the information captured in the global heavy metal patterns. Data used in this study consisted of the heavy metal contents determined in 23 soil samples from and around the Novi Sad city area in the Vojvodina Province, northern part of Serbia, together with those from the city of Banja Luka, the second largest city in Bosnia and Herzegovina, and the ones reported previously in the relevant literature in order to evaluate heavy metal distribution pattern in soils of different land-use types, as well as spatial and temporal differences in the patterns. The chemometric analysis was applied on the following input data sets: the overall set with all data gathered in this study containing 264 samples, and two sub sets obtained after dividing the overall set in accordance to the soil metal index, SMI, calculated here, i.e. the set of unpolluted soils having SMIs100%. Additionally, univariate descriptive statistics and the Spearman's non-parametric rank correlation coefficients were calculated for these three sets. A Box-Cox transformation was used as a data pretreatment before the statistical methods applied. According to the results, it was seen that anthropogenic and background sources had different impact on the data variability in the case of polluted and unpolluted soils. The sample discrimination regarding the land-use types was more evident for the unpolluted soils than for the polluted ones. Using linear discriminant analysis, content of Cu was determined as a variable with a major discriminant capacity. The correct classification of 73.3% was achieved for predefined land-use types. Classification of the samples in accordance to the pollution level expressed as SMI was necessary in order to avoid the "masking" effect of the polluted soil patterns over the non-polluted ones.

  14. Competitive sorption of heavy metals by water hyacinth roots.

    Science.gov (United States)

    Zheng, Jia-Chuan; Liu, Hou-Qi; Feng, Hui-Min; Li, Wen-Wei; Lam, Michael Hon-Wah; Lam, Paul Kwan-Sing; Yu, Han-Qing

    2016-12-01

    Heavy metal pollution is a global issue severely constraining aquaculture practices, not only deteriorating the aquatic environment but also threatening the aquaculture production. One promising solution is adopting aquaponics systems where a synergy can be established between aquaculture and aquatic plants for metal sorption, but the interactions of multiple metals in such aquatic plants are poorly understood. In this study, we investigated the absorption behaviors of Cu(II) and Cd(II) in water by water hyacinth roots in both single- and binary-metal systems. Cu(II) and Cd(II) were individually removed by water hyacinth roots at high efficiency, accompanied with release of protons and cations such as Ca(2+) and Mg(2+). However, in a binary-metal arrangement, the Cd(II) sorption was significantly inhibited by Cu(II), and the higher sorption affinity of Cu(II) accounted for its competitive sorption advantage. Ionic exchange was identified as a predominant mechanism of the metal sorption by water hyacinth roots, and the amine and oxygen-containing groups are the main binding sites accounting for metal sorption via chelation or coordination. This study highlights the interactive impacts of different metals during their sorption by water hyacinth roots and elucidates the underlying mechanism of metal competitive sorption, which may provide useful implications for optimization of phytoremediation system and development of more sustainable aquaculture industry.

  15. Leachability of Arsenic and Heavy Metals from Mine Tailings of Abandoned Metal Mines

    Science.gov (United States)

    Lim, Mihee; Han, Gi-Chun; Ahn, Ji-Whan; You, Kwang-Suk; Kim, Hyung-Seok

    2009-01-01

    Mine tailings from an abandoned metal mine in Korea contained high concentrations of arsenic (As) and heavy metals [e.g., As: 67,336, Fe: 137,180, Cu: 764, Pb: 3,572, and Zn: 12,420 (mg/kg)]. US EPA method 6010 was an effective method for analyzing total arsenic and heavy metals concentrations. Arsenic in the mine tailings showed a high residual fraction of 89% by a sequential extraction. In Toxicity Characteristic Leaching Procedure (TCLP) and Korean Standard Leaching Test (KSLT), leaching concentrations of arsenic and heavy metals were very low [e.g., As (mg/L): 0.4 for TCLP and 0.2 for KSLT; cf. As criteria (mg/L): 5.0 for TCLP and 1.5 for KSLT]. PMID:20049231

  16. Heavy liquid metals: Research programs at PSI

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, Y.

    1996-06-01

    The author describes work at PSI on thermohydraulics, thermal shock, and material tests for mechnical properties. In the presentation, the focus is on two main programs. (1) SINQ LBE target: The phase II study program for SINQ is planned. A new LBE loop is being constructed. The study has the following three objectives: (a) Pump study - design work on an electromagnetic pump to be integrated into the target. (b) Heat pipe performance test - the use of heat pipes as an additional component of the target cooling system is being considered, and it may be a way to futher decouple the liquid metal and water coolant loops. (c) Mixed convection experiment - in order to find an optimal configuration of the additional flow guide for window cooling, mixed convection around the window is to be studied. The experiment will be started using water and then with LBE. (2) ESS Mercury target: For ESS target study, the following experimental studies are planned, some of which are exampled by trial experiments. (a) Flow around the window: Flow mapping around the hemi-cylindrical window will be made for optimising the flow channels and structures, (b) Geometry optimisation for minimizing a recirculation zone behind the edge of the flow separator, (c) Flow induced vibration and buckling problem for a optimised structure of the flow separator and (d) Gas-liquid two-phase flow will be studied by starting to establish the new experimental method of measuring various kinds of two-phase flow characteristics.

  17. Bioremediation of heavy metals in liquid media through fungi isolated from contaminated sources.

    Science.gov (United States)

    Joshi, P K; Swarup, Anand; Maheshwari, Sonu; Kumar, Raman; Singh, Namita

    2011-10-01

    Wastewater particularly from electroplating, paint, leather, metal and tanning industries contain enormous amount of heavy metals. Microorganisms including fungi have been reported to exclude heavy metals from wastewater through bioaccumulation and biosorption at low cost and in eco-friendly way. An attempt was, therefore, made to isolate fungi from sites contaminated with heavy metals for higher tolerance and removal of heavy metals from wastewater. Seventy-six fungal isolates tolerant to heavy metals like Pb, Cd, Cr and Ni were isolated from sewage, sludge and industrial effluents containing heavy metals. Four fungi (Phanerochaete chrysosporium, Aspegillus awamori, Aspergillus flavus, Trichoderma viride) also were included in this study. The majority of the fungal isolates were able to tolerate up to 400 ppm concentration of Pb, Cd, Cr and Ni. The most heavy metal tolerant fungi were studied for removal of heavy metals from liquid media at 50 ppm concentration. Results indicated removal of substantial amount of heavy metals by some of the fungi. With respect to Pb, Cd, Cr and Ni, maximum uptake of 59.67, 16.25, 0.55, and 0.55 mg/g was observed by fungi Pb3 (Aspergillus terreus), Trichoderma viride, Cr8 (Trichoderma longibrachiatum), and isolate Ni27 (A. niger) respectively. This indicated the potential of these fungi as biosorbent for removal of heavy metals from wastewater and industrial effluents containing higher concentration of heavy metals.

  18. Biochar Mechanisms of Heavy Metal Sorption and Potential Utility

    Science.gov (United States)

    Ippolito, J.

    2015-12-01

    Mining-affected lands are a global issue; in the USA alone there are an estimated 500,000 abandoned mines encompassing hundreds of thousands of hectares. Many of these sites generate acidic mine drainage that causes release of heavy metals, and subsequently degradation in environmental quality. Because of its potential liming characteristics, biochar may play a pivotal role as a soil amendment in future mine land reclamation. However, to date, most studies have focused on the use of biochar to sorb metals from solution. Previous studies suggest that metals are complexed by biochar surface function groups (leading to ion exchange, complexation), coordination with Pi electrons (C=C) of carbon, and precipitation of inorganic mineral phases. Several recent studies have focused on the use of biochar for amending mine land soils, showing that biochar can indeed reduce heavy metal lability, yet the mechanism(s) behind labile metal reduction have yet to be established. In a proof-of-concept study, we added lodgepole pine, tamarisk, and switchgrass biochar (0, 5, 10, 15% by weight; 500 oC) to four different western US mine land soils affected by various heavy metals (Cd, Cu, Mn, Pb, Zn). Extraction with 0.01M CaCl2 showed that increasing biochar application rate significantly decreased 'bioaccessible' metals in almost all instances. A concomitant increase in solution pH was observed, suggesting that metals may be rendered bio-inaccessible through precipitation as carbonate or (hydr)oxide phases, or sorbed onto mineral surfaces. However, this was only supposition and required further research. Thus, following the 0.01M CaCl2 extraction, biochar-soil mixtures were air-dried and metals were further extracted using the four-step BCR sequential removal procedure. Results from selective extraction suggest that, as compared to the controls, most metals in the biochar-amended mine land soils were associated with exchange sites, carbonate, and oxide phases. Biochar may play a

  19. Miniaturized metal (metal alloy)/ PdO.sub.x/SiC hydrogen and hydrocarbon gas sensors

    Science.gov (United States)

    Hunter, Gary W. (Inventor); Xu, Jennifer C. (Inventor); Lukco, Dorothy (Inventor)

    2011-01-01

    A miniaturized Schottky diode hydrogen and hydrocarbon sensor and the method of making same is disclosed and claimed. The sensor comprises a catalytic metal layer, such as palladium, a silicon carbide substrate layer and a thin barrier layer in between the catalytic and substrate layers made of palladium oxide (PdO.sub.x ). This highly stable device provides sensitive gas detection at temperatures ranging from at least 450 to 600.degree. C. The barrier layer prevents reactions between the catalytic metal layer and the substrate layer. Conventional semiconductor fabrication techniques are used to fabricate the small-sized sensors. The use of a thicker palladium oxide barrier layer for other semiconductor structures such as a capacitor and transistor structures is also disclosed.

  20. Miniaturized Metal (Metal Alloy)/PdO(x)/SiC Hydrogen and Hydrocarbon Gas Sensors

    Science.gov (United States)

    Hunter, Gary W. (Inventor); Xu, Jennifer C. (Inventor); Lukco, Dorothy (Inventor)

    2008-01-01

    A miniaturized Schottky diode hydrogen and hydrocarbon sensor and the method of making same is disclosed and claimed. The sensor comprises a catalytic metal layer, such as palladium, a silicon carbide substrate layer and a thin barrier layer in between the catalytic and substrate layers made of palladium oxide (PdO(x)). This highly stable device provides sensitive gas detection at temperatures ranging from at least 450 to 600 C. The barrier layer prevents reactions between the catalytic metal layer and the substrate layer. Conventional semiconductor fabrication techniques are used to fabricate the small-sided sensors. The use of a thicker palladium oxide barrier layer for other semiconductor structures such as a capacitor and transistor structures is also disclosed.

  1. Contribution of the arbuscular mycorrhizal symbiosis to heavy metal phytoremediation.

    Science.gov (United States)

    Göhre, Vera; Paszkowski, Uta

    2006-05-01

    High concentrations of heavy metals (HM) in the soil have detrimental effects on ecosystems and are a risk to human health as they can enter the food chain via agricultural products or contaminated drinking water. Phytoremediation, a sustainable and inexpensive technology based on the removal of pollutants from the environment by plants, is becoming an increasingly important objective in plant research. However, as phytoremediation is a slow process, improvement of efficiency and thus increased stabilization or removal of HMs from soils is an important goal. Arbuscular mycorrhizal (AM) fungi provide an attractive system to advance plant-based environmental clean-up. During symbiotic interaction the hyphal network functionally extends the root system of their hosts. Thus, plants in symbiosis with AM fungi have the potential to take up HM from an enlarged soil volume. In this review, we summarize current knowledge about the contribution of the AM symbiosis to phytoremediation of heavy metals.

  2. Sublethal Heavy Metal Stress Stimulates Innate Immunity in Tomato

    Directory of Open Access Journals (Sweden)

    Nilanjan Chakraborty

    2015-01-01

    Full Text Available Effect of sublethal heavy metal stress as plant biotic elicitor for triggering innate immunity in tomato plant was investigated. Copper in in vivo condition induced accumulation of defense enzymes like peroxidase (PO, polyphenol oxidase (PPO, phenylalanine ammonia-lyase (PAL, and β-1,3 glucanase along with higher accumulation of total phenol, antioxidative enzymes (catalase and ascorbate peroxidase, and total chlorophyll content. Furthermore, the treatment also induced nitric oxide (NO production which was confirmed by realtime visualization of NO burst using a fluorescent probe 4,5-diaminofluorescein diacetate (DAF-2DA and spectrophotometric analysis. The result suggested that the sublethal dose of heavy metal can induce an array of plant defense responses that lead to the improvement of innate immunity in plants.

  3. Improved inventory for heavy metal emissions from stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Hoffmann, Leif

    for stationary combustion plants and the corresponding improved emission inventories for the following HMs: Arsenic (As), Cadmium (Cd), Chromium (Cr), Copper (Cu), Mercury (Hg), Nickel (Ni), Lead (Pb), Selenium (Se) and Zinc (Zn). The report presents data for the year 2009 and time series for 1990......-2009. The report also include methodology, references and an uncertainty estimate. In Denmark, stationary combustion plants are among the most important emission sources for heavy metals. Emissions of all heavy metals have decreased considerably (73 % - 92 %) since 1990. The main HM emission sources are coal...... combustion, waste incineration, residual oil combustion and in 2009 also combustion of biomass. The emission from waste incineration plants has decreased profoundly also in recent years due to installation and improved performance of flue gas cleaning devices. The emission from power plants have also...

  4. Brassinosteroids and response of plants to heavy metals action

    Directory of Open Access Journals (Sweden)

    Iwona eRajewska

    2016-05-01

    Full Text Available Brassinosteroids (BRs are a widespread group of plant hormones. These phytohormones play a crucial role in the regulation of growth and development of various plant species, and they demonstrate high biological activity. BRs are considered to demonstrate protective activity in the plants exposed to various stresses. Due to rapid industrialization and urbanization, heavy metals have become one of the most important plant stressors. In plants, accumulation of heavy metals beyond the critical levels leads to oxidative stress. However, BRs may inhibit the degradation of lipids, resulted from the overproduction of reactive oxygen species under stress conditions, and increase the activity of antioxidants. They also have the ability to promote phytochelatins synthesis.

  5. Heavy metals in the Ljubljanica catchment area (Slovenia

    Directory of Open Access Journals (Sweden)

    Branka Trček

    2006-12-01

    Full Text Available In main springs and swallowholes of the Ljubljanica River Basin the monitoring of heavy metals was established at the beginning of 2005 with the intention to study the solute transport in the water body and to analyse the risk of contamination with heavy metals. The results of the first monitoring phase are presented–elements that indicate the load of environment due to industry, traffic,agriculture and urbanisation:Al,As,Cd,Cl,Cr,Cu,Mn in Pb. The results point out that the vulnerability of karst aquifers depends on aquifer hydrodynamic conditions, infiltration conditions and development of a karst drainage system. Furthermore, they indicated the local and regional geochemical and hydrogeological characteristics and enable to evidence the main processes and effects that impact on environmental changes.

  6. Effect of humic acid on transformation of soil heavy metals

    Science.gov (United States)

    Wu, Shengzhe; Li, Rui; Peng, Shuyang; Liu, Qiuyong; Zhu, Xi

    2017-06-01

    The pattern of transformation among different fractions of heavy metals in soil draws great attention. This article investigated the effect of humic acid on soil heavy metal under different pH and temperature. The results showed that with the increasing of the concentration of humic acid, the concentration of available Cu, Pb decreased greatly, though the decrease of available Cd was light. Also, pH of soil had certain impact on the concentration of available Cu, Pb, Cd while the influence of environmental temperature was minor. The removal efficiency of contaminated soil was 57.283% (Cu), 2.645% (Cd) and 15.485% (Pb) while it could reach more than 98% in contaminated solution.

  7. Improved inventory for heavy metal emissions from stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Hoffmann, Leif

    for stationary combustion plants and the corresponding improved emission inventories for the following HMs: Arsenic (As), Cadmium (Cd), Chromium (Cr), Copper (Cu), Mercury (Hg), Nickel (Ni), Lead (Pb), Selenium (Se) and Zinc (Zn). The report presents data for the year 2009 and time series for 1990......-2009. The report also include methodology, references and an uncertainty estimate. In Denmark, stationary combustion plants are among the most important emission sources for heavy metals. Emissions of all heavy metals have decreased considerably (73 % - 92 %) since 1990. The main HM emission sources are coal...... combustion, waste incineration, residual oil combustion and in 2009 also combustion of biomass. The emission from waste incineration plants has decreased profoundly also in recent years due to installation and improved performance of flue gas cleaning devices. The emission from power plants have also...

  8. Terbium-doped heavy metal glasses for green luminescence

    Institute of Scientific and Technical Information of China (English)

    L.Zur; J. Pisarska; W.A. Pisarski

    2011-01-01

    Compositional-dependent heavy metal lead borate glasses doped with Tb3+ ior were investigated.Green luminescence related to main 5D4→7F5 (543 nm) transition was registered under excitation of 5D3 state of Tb3+ ions.Based on excitation and luminescence measurements,several spectroscopic parameters for Tb3+ ions were examined as a function of heavy metal PbO content.Luminescence decay analysis indicated that the 5D4 luminescence lifetime of Tb3+ reduced from 2.83 to 1.42 ms,when PbO:B2O3 ratio was changed from 1:1 to 4:1.

  9. CONTENT OF HEAVY METALS IN CANNED SEA FISH

    Directory of Open Access Journals (Sweden)

    Július Árvay

    2014-02-01

    Full Text Available The aim of presented paper was to point on quality and healthiness of canned seafood considering the quantity of monitored hazardous elements, which are commonly available in Slovak trade network. We specified 19 types of sample for use in this paper that represent different locations of fish outs as well as different species baseline. We realized analyses to determine quantity of Cd, Pb, Hg and Cu in our samples. We compared obtained results of heavy metals quantity with adequate highest permitted levels defined by legislation effective in EU and SR. Obtained results show that the excess of maximum amounts we recorded for Cd and Pb, while on samples for which we did not exceed the values defined by legislation, we found similarity of content of heavy metals. In general we can come to conclusion, despite breaching the HPL, that monitored products do not represent any health risk due to consummation of this food.

  10. Sublethal heavy metal stress stimulates innate immunity in tomato.

    Science.gov (United States)

    Chakraborty, Nilanjan; Chandra, Swarnendu; Acharya, Krishnendu

    2015-01-01

    Effect of sublethal heavy metal stress as plant biotic elicitor for triggering innate immunity in tomato plant was investigated. Copper in in vivo condition induced accumulation of defense enzymes like peroxidase (PO), polyphenol oxidase (PPO), phenylalanine ammonia-lyase (PAL), and β-1,3 glucanase along with higher accumulation of total phenol, antioxidative enzymes (catalase and ascorbate peroxidase), and total chlorophyll content. Furthermore, the treatment also induced nitric oxide (NO) production which was confirmed by realtime visualization of NO burst using a fluorescent probe 4,5-diaminofluorescein diacetate (DAF-2DA) and spectrophotometric analysis. The result suggested that the sublethal dose of heavy metal can induce an array of plant defense responses that lead to the improvement of innate immunity in plants.

  11. Evaluation of Heavy Metals Influence on Biogas Production

    Directory of Open Access Journals (Sweden)

    Ernestas Zaleckas

    2013-01-01

    Full Text Available Heavy metals play a very significant role in the performance and stability of biogas digesters, which are operated with organic fraction of municipal solid wastes or any other type of organic waste. For this reason this paper tries to evaluate the impact of heavy metals on biogas yield and quality. Anaerobic digestion of sewage sludge and rapeseed cake mixture has been carried out for 14 days. The obtained data show that the greatest negative impact on biogas production was made by zinc additive. Meanwhile, methane content in biogas varied from 64.5 to 70%.DOI: http://dx.doi.org/10.5755/j01.erem.62.4.2040

  12. Research Progress of Artificial Forest in the Remediation of Heavy Metal Contaminated Soils

    Science.gov (United States)

    Jiafang, MA; Guangtao, MENG; Liping, HE; Guixiang, LI

    2017-01-01

    (1) Remediation of soil contaminated by heavy metals has become a hot topic in the world, and phytoremediation technology is the most widely used. (2) In addition to traditional economic benefits, ecological benefits of artificial forest have been more and more important, which are very helpful to soil polluted with heavy metals in the environment. (3) The characteristics of heavy metal pollution of soil and plantations of repair mechanism have been reviewed, and the current mining areas, wetlands, urban plantations on heavy metal elements have enriched the research results. The purpose is to find a new path for governance of heavy metal soil pollution.

  13. Relation of sulfur with hydrocarbons in Brazilian heavy and extra-heavy crude oil; Relacao do enxofre com os hidrocarbonetos em petroleos pesados e extra pesados brasileiros

    Energy Technology Data Exchange (ETDEWEB)

    Iorio, Sonia Maria Badaro Mangueira; Guimaraes, Regina Celia Lourenco; Silva, Maria do Socorro A. Justo da [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Costa, Alexander Vinicius Moraes da [Fundacao Gorceix, Ouro Preto, MG (Brazil)

    2008-07-01

    As the occurrence of heavy and extra-heavy oils increases sensitively, their participation in the refineries feeding also becomes greater. Heavy oils usually have lower price than a light one, because they produce lower quality derivatives and it's more difficult to meet the specifications. Crude oils are a complex mixture, mostly compounded by carbon and hydrogen and also by impurities like sulfur, nitrogen, oxygen and metals. Sulfur is the third most abundant component of crude oils, following carbon and hydrogen. In general there is a strong positive correlation between the concentrations of polar compounds (aromatics, resins and asphaltenes), and the sulfur content. This work presents graphically sulfur content and polar compounds concentrations for Brazilian and foreign heavy and extra-heavy oils (< 20 deg API). The results of the data analysis indicate that Brazilian crude oils behave differently from foreign heavy and extra-heavy oils. (author)

  14. Analytical Methods for the Determination of Heavy Metals in the Textile Industry

    Directory of Open Access Journals (Sweden)

    Steffan, I.

    2007-11-01

    Full Text Available Heavy metals in textile wastewater represent a major environmental problem, and are a potential danger to human health when present on textiles. Furthermore, the presence of some metals influences the production of textiles. Heavy metals are often used as oxidizing agents, as metal complex dyes, dye stripping agents, fastness improvers, and finishers. Thus, they act as hazardous sources throughout entire textile processing. Toxic effects of heavy metals on humans are well documented. Therefore, it is important to monitor heavy metals throughout the entire production. Today, maximum permissible values for metals in textiles are given by different regulations, according to which the heavy metals have to be determined both qualitatively and quantitatively. Several analytical procedures for the determination of heavy metals were tested for their application on textiles. The advantages and disadvantages of TLC, UV-VIS, GF-AAS, ICP-OES, and ICP-MS methods are discussed.

  15. A novel heavy metal ATPase peptide from Prosopis juliflora is involved in metal uptake in yeast and tobacco.

    Science.gov (United States)

    Keeran, Nisha S; Ganesan, G; Parida, Ajay K

    2017-04-01

    Heavy metal pollution of agricultural soils is one of the most severe ecological problems in the world. Prosopis juliflora, a phreatophytic tree species, grows well in heavy metal laden industrial sites and is known to accumulate heavy metals. Heavy Metal ATPases (HMAs) are ATP driven heavy metal pumps that translocate heavy metals across biological membranes thus helping the plant in heavy metal tolerance and phytoremediation. In the present study we have isolated and characterized a novel 28.9 kDa heavy metal ATPase peptide (PjHMT) from P. juliflora which shows high similarity to the C-terminal region of P1B ATPase HMA1. It also shows the absence of the invariant signature sequence DKTGT, and the metal binding CPX motif but the presence of conserved regions like MVGEGINDAPAL (ATP binding consensus sequence), HEGGTLLVCLNS (metal binding domain) and MLTGD, GEGIND and HEGG motifs which play important roles in metal transport or ATP binding. PjHMT, was found to be upregulated under cadmium and zinc stress. Heterologous expression of PjHMT in yeast showed a higher accumulation and tolerance of heavy metals in yeast. Further, transgenic tobacco plants constitutively expressing PjHMT also showed increased accumulation and tolerance to cadmium. Thus, this study suggests that the transport peptide from P. juliflora may have an important role in Cd uptake and thus in phytoremediation.

  16. Structural and functional studies of heavy metal ATPases

    DEFF Research Database (Denmark)

    Sitsel, Oleg

    2015-01-01

    to handle heavy metal ions. LpCopA is then compared to its two human homologues ATP7A and ATP7B, which cause the severe Menkes and Wilson diseases when malfunctioning. The differences between the three proteins are described and disease-causing mutations in the human proteins are analyzed. The crystal......Copper and zinc are trace elements that are crucial for the well-being of all cells and are an indispensable part of many proteins. At the same time, the intracellular levels of these metals require careful regulation, as an excess or deficiency may be lethal. P1B-ATPases are key players in Cu...

  17. Presence of Toxic Heavy Metals in Human Breast Milk

    Directory of Open Access Journals (Sweden)

    Mustafa Özçetin

    2013-03-01

    Full Text Available      Aim: In breast-fed infants, toxic chemicals previously been exposed to the mother are also a potential risk to the baby. The aim of this study is to investigate the presence of Ni, Cd, Pb and Sb in mother’s milk and to highlight the possible potential risks of toxic heavy metals in the light of published epidemiological studies and scientific literature. Material and Method: For the study, milk samples were collected from 58 breast-feeding mothers who were residing in their provinces for more than five years and gave birth here and applied to follow up in any time after the first month period. Ni, Cd, Pb and Sb levels of milk samples were measured by ICP (Inductively Coupled Plasma spectroscopy device. Results: In examined breast milks, 53.4% Ni, 17.2% Cd, 12.1% Pb and 15.5% Sb were found. Out of 58 mothers enrolled in the study, none of the heavy metals was detected in only 13 (22.4% mother’s milk, one or more heavy metal was found in the rest of the milks of mothers. Discusssion: In rural and urban areas, the environment is widely contaminated with heavy metals. This toxic substances come to be found in breast  milk. In the earth, the main source of environmental toxins that breast-feed infants faced with is breast milk. To minimize the exposure of toxins with breast milk, the risk of confrontation with mothers and toxic agents should be reduced.  

  18. Heavy Metals in the Vegetables Collected from Production Sites

    Directory of Open Access Journals (Sweden)

    Hassan Taghipour

    2013-12-01

    Full Text Available Background: Contamination of vegetable crops (as an important part of people's diet with heavy metals is a health concern. Therefore, monitoring levels of heavy metals in vegetables can provide useful information for promoting food safety. The present study was carried out in north-west of Iran (Tabriz on the content of heavy metals in vegetable crops. Methods: Samples of vegetables including kurrat (n=20 (Allium ampeloprasumssp. Persicum, onion (n=20 (Allium cepa and tomato (n=18 (Lycopersiconesculentum var. esculentum, were collected from production sites in west of Tabriz and analyzed for presence of Cd, Cr, Cu, Ni, Pb and Zn by atomic absorption spectroscopy (AAS after extraction by aqua regia method (drying, grounding and acid digestion. Results: Mean ± SD (mg/kg DW concentrations of Cd, Cu, Cr, Ni and Zn were 0.32 ± 0.58, 28.86 ± 28.79, 1.75 ± 2.05, 6.37± 5.61 and 58.01 ± 27.45, respectively. Cr, Cu and Zn were present in all the samples and the highest concentrations were observed in kurrat (leek. Levels of Cd, Cr and Cu were higher than the acceptable limits. There was significant difference in levels of Cr (P<0.05 and Zn (P<0.001 among the studied vegetables. Positive correlation was observed between Cd:Cu (R=0.659, P<0.001 Cr:Ni (R=0.326, P<0.05 and Cr:Zn (R=0.308, P<0.05. Conclusion: Level of heavy metals in some of the analyzed vegetables, especially kurrat samples, was higher than the standard levels. Considering the possible health outcomes due to the consumption of contaminated vegetables, it is required to take proper actions for avoiding people's chronic exposure.

  19. Chelation of heavy metals by potassium butyl dithiophosphate

    Institute of Scientific and Technical Information of China (English)

    Ying Xu; Zhigang Xie; Lu Xue

    2011-01-01

    Potassium butyl dithiophosphate (PBD) was developed and introduced as a new chelating agent for heavy metal removal.The synthesized PBD were characterized by IR and NMR.The effects of pH, chelating agent dosage, and other heavy metal ions on the performance of PBD in Cd2+ removal from water are investigated.Experimental results showed that the chelating agent could be used to treat acidic heavy metal wastewater.The Cd2+ removal was not affected by solution pH value within the range of 2 to 6.The Cd2+ removal rate could reach over 99%.Therefore, the deficiency of the precipitation process using hydroxide under alkaline condition can be overcome.Without the need for pH adjustment, the method could save on costs.If Cd2+ co-exists with Pb2+ and Cu2+, the affinity of the chelating agent with these three heavy metal ions was in the order of: Cu2+ > Pb2+ > Cd2+.Through PBD chelating precipitation,all the contents of Pb2+, Cd2+, and Cu2+ in wastewater met the standard levels through a one-step treatment.The one-step treatment process was superior to the process (sectional treatment is required) of precipitation with hydroxide.When the pH was between 3 and 11, the amount of leached chelated Cd2+ was much lower than that obtained by precipitation with hydroxide.Therefore, the risk of environmental pollution could be further reduced.

  20. Heavy metal evaporation kinetics in thermal waste treatment processes

    Energy Technology Data Exchange (ETDEWEB)

    Ludwig, Ch.; Stucki, S.; Schuler, A.J. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    To investigate the evaporation kinetics of heavy metals, experiments were performed by conventional thermogravimetry and a new method using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The new method allows online measurements in time intervals that are typically below one minute. The evaporation of Cd, Cu, Pb, and Zn from synthetic mixtures and filter ashes from municipal solid waste incineration (MSWI) was of major interest. (author) 2 figs., 4 refs.