Sample records for hydride generation validacion

  1. Nanostructured, complex hydride systems for hydrogen generation

    Directory of Open Access Journals (Sweden)

    Robert A. Varin


    Full Text Available Complex hydride systems for hydrogen (H2 generation for supplying fuel cells are being reviewed. In the first group, the hydride systems that are capable of generating H2 through a mechanical dehydrogenation phenomenon at the ambient temperature are discussed. There are few quite diverse systems in this group such as lithium alanate (LiAlH4 with the following additives: nanoiron (n-Fe, lithium amide (LiNH2 (a hydride/hydride system and manganese chloride MnCl2 (a hydride/halide system. Another hydride/hydride system consists of lithium amide (LiNH2 and magnesium hydride (MgH2, and finally, there is a LiBH4-FeCl2 (hydride/halide system. These hydride systems are capable of releasing from ~4 to 7 wt.% H2 at the ambient temperature during a reasonably short duration of ball milling. The second group encompasses systems that generate H2 at slightly elevated temperature (up to 100 °C. In this group lithium alanate (LiAlH4 ball milled with the nano-Fe and nano-TiN/TiC/ZrC additives is a prominent system that can relatively quickly generate up to 7 wt.% H2 at 100 °C. The other hydride is manganese borohydride (Mn(BH42 obtained by mechano-chemical activation synthesis (MCAS. In a ball milled (2LiBH4 + MnCl2 nanocomposite, Mn(BH42 co-existing with LiCl can desorb ~4.5 wt.% H2 at 100 °C within a reasonable duration of dehydrogenation. Practical application aspects of hydride systems for H2 generation/storage are also briefly discussed.

  2. Hydrogen generation from magnesium hydride by using organic acid (United States)

    Ho, Yen-Hsi

    In this paper, the hydrolysis of solid magnesium hydride has been studied with the high concentration of catalyst at the varying temperature. An organic acid (acetic acid, CH3COOH) has been chosen as the catalyst. The study has three objectives: first, using three different weights of MgH 2 react with aqueous solution of acid for the hydrogen generation experiments. Secondly, utilizing acetic acid as the catalyst accelerates hydrogen generation. Third, emphasizing the combination of the three operating conditions (the weight of MgH2, the concentration of acetic acid, and the varying temperature) influence the amount of hydrogen generation. The experiments results show acetic acid truly can increase the rate of hydrogen generation and the weight of MgH2 can affect the amount of hydrogen generation more than the varying temperature.

  3. Hydrogen generation using silicon nanoparticles and their mixtures with alkali metal hydrides (United States)

    Patki, Gauri Dilip

    Hydrogen is a promising energy carrier, for use in fuel cells, engines, and turbines for transportation or mobile applications. Hydrogen is desirable as an energy carrier, because its oxidation by air releases substantial energy (thermally or electrochemically) and produces only water as a product. In contrast, hydrocarbon energy carriers inevitably produce CO2, contributing to global warming. While CO2 capture may prove feasible in large stationary applications, implementing it in transportation and mobile applications is a daunting challenge. Thus a zero-emission energy carrier like hydrogen is especially needed in these cases. Use of H2 as an energy carrier also brings new challenges such as safe handling of compressed hydrogen and implementation of new transport, storage, and delivery processes and infrastructure. With current storage technologies, hydrogen's energy per volume is very low compared to other automobile fuels. High density storage of compressed hydrogen requires combinations of high pressure and/or low temperature that are not very practical. An alternative for storage is use of solid light weight hydrogenous material systems which have long durability, good adsorption properties and high activity. Substantial research has been conducted on carbon materials like activated carbon, carbon nanofibers, and carbon nanotubes due to their high theoretical hydrogen capacities. However, the theoretical values have not been achieved, and hydrogen uptake capacities in these materials are below 10 wt. %. In this thesis we investigated the use of silicon for hydrogen generation. Hydrogen generation via water oxidation of silicon had been ignored due to slow reaction kinetics. We hypothesized that the hydrogen generation rate could be improved by using high surface area silicon nanoparticles. Our laser-pyrolysis-produced nanoparticles showed surprisingly rapid hydrogen generation and high hydrogen yield, exceeding the theoretical maximum of two moles of H2 per


    A method based on pH-selective generation and separation of arsines is commonly used for analysis of inorganic, methylated, and dimethylated trivalent and pentavalent arsenicals by hydride generation-atomic absorption spectrometry (HG-AAS). We have optimized this method to pe...

  5. Dielectric barrier discharge plasma atomizer for hydride generation atomic absorption spectrometry-Performance evaluation for selenium

    Czech Academy of Sciences Publication Activity Database

    Duben, Ondřej; Boušek, J.; Dědina, Jiří; Kratzer, Jan


    Roč. 111, SEP (2015), s. 57-63 ISSN 0584-8547 Grant - others:GA AV ČR(CZ) M200311202 Institutional support: RVO:68081715 Keywords : dielectric barrier discharge * hydride generation-atomic absorption spectrometry * selenium Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 3.289, year: 2015

  6. Direct determination of Ge in hot spring waters and coal fly ash samples by hydride generation-ETAAS

    Energy Technology Data Exchange (ETDEWEB)

    Moscoso-Perez, Carmen; Moreda-Pineiro, Jorge; Lopez-Mahia, Purificacion; Muniategui-Lorenzo, Soledad; Fernandez-Fernandez, Esther; Prada-Rodriguez, Dario [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira, s/n. E-15071, A Coruna (Spain)


    A method for Ge determination in hot spring water and acid extracts from coal fly ash samples involving hydride generation, trapping and atomisation of the hydride generated from Ir-treated graphite tubes (GTs) has been developed. Hydride was generated from hydrochloric acid medium using sodium tetrahydroborate. Several factors affecting the hydride generation, transport, trapping and atomisation efficiency were studied by using a Plackett-Burman design. Results obtained from Plackett-Burman designs suggest that trapping and atomisation temperatures are the significant factors involved on the procedure. The accuracy was studied using NIST-1633a (coal fly ash) reference material. The detection limit of the proposed method was 2.4{mu}gl{sup -1} and the characteristic mass of 233pg was achieved. The Ge concentrations in fly ash and hot spring samples were between 6.25-132{mu}gg{sup -1} and 12.84-36.2{mu}gl{sup -1}.

  7. Determination of antimony in drinking waters by an inexpensive, reproducible hydride generator for atomic spectroscopy. (United States)

    Barbera, R; Farré, R; Romero, I


    A method for determining antimony in drinking waters is described. In order to prevent a substantial error caused by the different oxidation states of antimony, Sb(V) is reduced to Sb(III) with potassium iodide-ascorbic acid. Covalent hydride is generated with a home made device by adding NaBH4. The hydride is then atomized in a flame-heated silica tube and atomic absorption is measured spectrophotometrically. The optimal conditions for this determination are discussed and interference effects are described. Results obtained by determining linearity range (0-200 ng), detection (LOD) and quantitation (LOQ) limits (LOD = 0.347 ng/ml, LOQ = 1.158 ng/ml), precision (instrumental CV 4.08% and method CV 7.74%) and accuracy performed by recovery assays (96.1%) show that the method is useful for antimony determination at the concentration usually present in drinking water.

  8. Dealloyed Ruthenium Film Catalysts for Hydrogen Generation from Chemical Hydrides

    Directory of Open Access Journals (Sweden)

    Ramis B. Serin


    Full Text Available Thin-film ruthenium (Ru and copper (Cu binary alloys have been prepared on a Teflon™ backing layer by cosputtering of the precious and nonprecious metals, respectively. Alloys were then selectively dealloyed by sulfuric acid as an etchant, and their hydrogen generation catalysts performances were evaluated. Sputtering time and power of Cu atoms have been varied in order to tailor the hydrogen generation performances. Similarly, dealloying time and the sulfuric acid concentration have also been altered to tune the morphologies of the resulted films. A maximum hydrogen generation rate of 35 mL min−1 was achieved when Cu sputtering power and time were 200 W and 60 min and while acid concentration and dealloying time were 18 M and 90 min, respectively. It has also been demonstrated that the Ru content in the alloy after dealloying gradually increased with the increasing the sputtering power of Cu. After 90 min dealloying, the Ru to Cu ratio increased to about 190 times that of bare alloy. This is the key issue for observing higher catalytic activity. Interestingly, we have also presented template-free nanoforest-like structure formation within the context of one-step alloying and dealloying used in this study. Last but not least, the long-time hydrogen generation performances of the catalysts system have also been evaluated along 3600 min. During the first 600 min, the catalytic activity was quite stable, while about 24% of the catalytic activity decayed after 3000 min, which still makes these systems available for the development of robust catalyst systems in the area of hydrogen generation.

  9. Minimum Entropy Generation Theorem Investigation and Optimization of Metal Hydride Alloy Hydrogen Storage

    Directory of Open Access Journals (Sweden)

    Chi-Chang Wang


    Full Text Available The main purpose of this paper is to carry out numerical simulation of the hydrogen storage on exothermic reaction of metal hydride LaNi5 alloy container. In addition to accelerating the reaction speed of the internal metal hydride by internal control tube water-cooled mode, analyze via the application of second law of thermodynamics the principle of entropy generation. Use COMSOL Mutilphysics 4.3 a to engage in finite element method value simulation on two-dimensional axisymmetric model. Also on the premise that the internal control tube parameters the radius ri, the flow rate U meet the metal hydride saturation time, observe the reaction process of two parameters on the tank, entropy distribution and the results of the accumulated entropy. And try to find the internal tube parameter values of the minimum entropy, whose purpose is to be able to identify the reaction process and the reaction results of internal tank’s optimum energy conservation.

  10. Rapid hydrogen gas generation using reactive thermal decomposition of uranium hydride.

    Energy Technology Data Exchange (ETDEWEB)

    Kanouff, Michael P.; Van Blarigan, Peter; Robinson, David B.; Shugard, Andrew D.; Gharagozloo, Patricia E.; Buffleben, George M.; James, Scott Carlton; Mills, Bernice E.


    Oxygen gas injection has been studied as one method for rapidly generating hydrogen gas from a uranium hydride storage system. Small scale reactors, 2.9 g UH{sub 3}, were used to study the process experimentally. Complimentary numerical simulations were used to better characterize and understand the strongly coupled chemical and thermal transport processes controlling hydrogen gas liberation. The results indicate that UH{sub 3} and O{sub 2} are sufficiently reactive to enable a well designed system to release gram quantities of hydrogen in {approx} 2 seconds over a broad temperature range. The major system-design challenge appears to be heat management. In addition to the oxidation tests, H/D isotope exchange experiments were performed. The rate limiting step in the overall gas-to-particle exchange process was found to be hydrogen diffusion in the {approx}0.5 {mu}m hydride particles. The experiments generated a set of high quality experimental data; from which effective intra-particle diffusion coefficients can be inferred.

  11. Determination of tellurium by hydride generation with in situ trapping flame atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Matusiewicz, H.; Krawczyk, M. [Politechn Poznanska, Poznan (Poland)


    The analytical performance of coupled hydride generation - integrated atom trap (HG-IAT) atomizer flame atomic absorption spectrometry (FAAS) system was evaluated for determination of Te in reference material (GBW 07302 Stream Sediment), coal fly ash and garlic. Tellurium, using formation of H{sub 2}Te vapors, is atomized in air-acetylene flame-heated IAT. A new design HG-IAT-FAAS hyphenated technique that would exceed the operational capabilities of existing arrangernents (a water-cooled single silica tube, double-slotted quartz tube or an 'integrated trap') was investigated. An improvement in detection limit was achieved compared with using either of the above atom trapping techniques separately. The concentration detection limit, defined as 3 times the blank standard deviation (3{sigma}), was 0.9 ng mL{sup -1} for Te. For a 2 min in situ preconcentration time (sample volume of 2 mL), sensitivity enhancement compared to flame AAS, was 222 fold, using the hydride generation atom trapping technique. The sensitivity can be further improved by increasing the collection time. The precision, expressed as RSD, was 7.0% (n = 6) for Te. The accuracy of the method was verified using a certified reference material (GBW 07302 Stream Sediment) by aqueous standard calibration curves. The measured Te contents of the reference material was in agreement with the information value. The method was successfully applied to the determination of tellurium in coal fly ash and garlic.

  12. Automated determinations of selenium in thermal power plant wastewater by sequential hydride generation and chemiluminescence detection. (United States)

    Ezoe, Kentaro; Ohyama, Seiichi; Hashem, Md Abul; Ohira, Shin-Ichi; Toda, Kei


    After the Fukushima disaster, power generation from nuclear power plants in Japan was completely stopped and old coal-based power plants were re-commissioned to compensate for the decrease in power generation capacity. Although coal is a relatively inexpensive fuel for power generation, it contains high levels (mgkg(-1)) of selenium, which could contaminate the wastewater from thermal power plants. In this work, an automated selenium monitoring system was developed based on sequential hydride generation and chemiluminescence detection. This method could be applied to control of wastewater contamination. In this method, selenium is vaporized as H2Se, which reacts with ozone to produce chemiluminescence. However, interference from arsenic is of concern because the ozone-induced chemiluminescence intensity of H2Se is much lower than that of AsH3. This problem was successfully addressed by vaporizing arsenic and selenium individually in a sequential procedure using a syringe pump equipped with an eight-port selection valve and hot and cold reactors. Oxidative decomposition of organoselenium compounds and pre-reduction of the selenium were performed in the hot reactor, and vapor generation of arsenic and selenium were performed separately in the cold reactor. Sample transfers between the reactors were carried out by a pneumatic air operation by switching with three-way solenoid valves. The detection limit for selenium was 0.008 mg L(-1) and calibration curve was linear up to 1.0 mg L(-1), which provided suitable performance for controlling selenium in wastewater to around the allowable limit (0.1 mg L(-1)). This system consumes few chemicals and is stable for more than a month without any maintenance. Wastewater samples from thermal power plants were collected, and data obtained by the proposed method were compared with those from batchwise water treatment followed by hydride generation-atomic fluorescence spectrometry. Copyright © 2015 Elsevier B.V. All rights

  13. [Removal of Antimony in Wastewater by Electrochemical Hydride Generation and the Recovery of Antimony]. (United States)

    Chen, Jing-jing; Zhang, Guo-ping; Li, Hai-xia; Fu, Zhi-ping; Ouyang, Xiao-xue; Wu, Qiong


    An electrochemical hydride generation method was developed for the removal of antimony in wastewater. Hydrogen was generated in the electrolysis of water. Hydrogen reacted with Sb and formed stibine, which volatilized from the solution. Then, stibine was heated and decomposed to elemental Sb. Based on these, Sb in wastewater could be removed and recovered. The highest removal of Sb (76.1%) was achieved in acidic solution (pH = 4). The formation of stibine was proven to contribute most significantly (66.2%) to the removal of antimony in the solution, while the electro-deposition and adsorption also made a small contribution. In the treatment, Sb(V) must be pre-reduced to Sb(III) prior to the formation of stibine. Lead, graphite and tungsten were employed as the materials for cathode, and lead electrode was found most suitable for the removal of antimony.

  14. Arsenic in marine tissues — The challenging problems to electrothermal and hydride generation atomic absorption spectrometry (United States)

    Karadjova, Irina B.; Petrov, Panayot K.; Serafimovski, Ivan; Stafilov, Trajče; Tsalev, Dimiter L.


    Analytical problems in determination of arsenic in marine tissues are addressed. Procedures for the determination of total As in solubilized or extracted tissues with tetramethylammonium hydroxide and methanol have been elaborated. Several typical lyophilized tissues were used: NIST SRM 1566a 'Oyster Tissue', BCR-60 CRM 'Trace Elements in an Aquatic Plant ( Lagarosiphon major)', BCR-627 'Forms of As in Tuna Fish Tissue', IAEA-140/TM 'Sea Plant Homogenate', NRCC DOLT-1 'Dogfish Liver' and two representatives of the Black Sea biota, Mediterranean mussel ( Mytilus galloprovincialis) and Brown algae ( Cystoseira barbata). Tissues (nominal 0.3 g) were extracted in tetramethylammonium hydroxide (TMAH) 1 ml of 25% m/v TMAH and 2 ml of water) or 5 ml of aqueous 80% v/v methanol (MeOH) in closed vessels in a microwave oven at 50 °C for 30 min. Arsenic in solubilized or extracted tissues was determined by electrothermal atomic absorption spectrometry (ETAAS) after appropriate dilution (nominally to 25 ml, with further dilution as required) under optimal instrumental parameters (pyrolysis temperature 900 °C and atomization temperature 2100 °C) with 1.5 μg Pd as modifier on Zr-Ir treated platform. Platforms have been pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which served as a permanent chemical modifier in direct ETAAS measurements and as an efficient hydride sequestration medium in flow injection hydride generation (FI-HG)-ETAAS. TMAH and methanol extract 96-108% and 51-100% of As from CRMs. Various calibration approaches have been considered and critically evaluated. The effect of species-dependent slope of calibration graph or standard additions plot for total As determination in a sample comprising of several individual As species with different ETAAS behavior has been considered as a kind of 'intrinsic element speciation interference' that cannot be completely overcome by standard additions technique. Calibration by means of CRMs has

  15. Direct analysis of methylated trivalent arsenicals in mouse liver by hydride generation-cryotrapping- atomic absorption spectrometry

    Czech Academy of Sciences Publication Activity Database

    Currier, J. M.; Svoboda, Milan; de Moraes, D. P.; Matoušek, Tomáš; Dědina, Jiří; Stýblo, M.


    Roč. 24, č. 4 (2011), s. 478-480 ISSN 0893-228X R&D Projects: GA ČR GA203/09/1783 Institutional research plan: CEZ:AV0Z40310501 Keywords : arsenic speciation * tissue * hydride generation Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 3.779, year: 2011

  16. Arsenic Speciation of Waters from the Aegean Region, Turkey by Hydride Generation: Atomic Absorption Spectrometry. (United States)

    Çiftçi, Tülin Deniz; Henden, Emur


    Arsenic in drinking water is a serious problem for human health. Since the toxicity of arsenic species As(III) and As(V) is different, it is important to determine the concentrations separately. Therefore, it is necessary to develop an accurate and sensitive method for the speciation of arsenic. It was intended with this work to determine the concentrations of arsenic species in water samples collected from Izmir, Manisa and nearby areas. A batch type hydride generation atomic absorption spectrometer was used. As(V) gave no signal under the optimal measurement conditions of As(III). A certified reference drinking water was analyzed by the method and the results showed excellent agreement with the reported values. The procedure was applied to 34 water samples. Eleven tap water, two spring water, 19 artesian well water and two thermal water samples were analyzed under the optimal conditions.

  17. Determination of selenium in Teucrium species by hydride generation atomic absorption spectrometry. (United States)

    Jurisić, Renata; Vladimir-Knezević, Sanda; Kalodera, Zdenka; Grgić, Jerica


    Hydride generation atomic absorption spectrometry (HGAAS) was applied for determination of selenium content in dried aerial parts of wild and cultivated Teucrium species (Lamiaceae) growing in Croatia: T. arduini L., T. chamaedrys L., T. flavum L., T. montanum L., T. polium L., and T. scordium L. subsp. scordioides Schreb. Special attention was paid to the wet oxidation procedure for the sample dissolution. The proposed procedure involved microwave-assisted sample digestion using a mixture of HNO3/H2O2. Wild specimens generally had a higher content of selenium, with concentrations of 0.030-0.095 mg/kg of the dry drug. Cultivated plants contained 0.020-0.055 mg Se/kg.

  18. Application of metal hydride paper to simple pressure generator for use in soft actuator systems. (United States)

    Ino, Shuichi; Sakaki, Kouji; Hosono, Minako; Doi, Kouki; Shimada, Shigenobu; Chikai, Manabu


    Metal hydride (MH) actuators have a simple structure and a number of features that make them attractive for use in rehabilitation engineering and assistive technology. The MH actuator provides a high power-to-weight ratio, high-strain actuation, human-compatible softness, and noiseless operation, while being environmentally benign. On the other hand, there remain technical challenges to be overcome to improve the MH actuator regarding its speed of operation and energy efficiency, given the low heat conductivity of the MH powder that is used as the pressure generator for soft actuation. To overcome the issues of low heat conductivity and the handling of MH powder, we developed an MH paper, which is a special paper incorporating MH powder and carbon fiber, for use as a new pressure-generating element for a soft MH actuator system. In addition, the basic properties and structure of the proposed MH paper were investigated through scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and several thermodynamic experiments. The results of these experiments showed that the hydrogen absorption and desorption rates of the MH paper were significantly higher than those of the MH powder around room temperature.

  19. Study of the fundamental plasma parameters by HG ICP-OES with a dual hydride generation system

    Directory of Open Access Journals (Sweden)

    Nereida Carrión


    Full Text Available The effect of hydrogen from hydrides generation in a radially-viewed inductively coupled plasma optical emission spectroscopy with a dual hydride-generator system on plasma excitation characteristic was studied. The effects of the acid concentration and reductant solution flow rate on the fundamental parameters were evaluated. Results showed an improvement on the plasma excitation conditions compared to standard nebulization. The excitation temperature, the electron number density and the ionic-to-atomic lines Mg(II/Mg(I ratio increased significantly when the system was operated in the dual mode, even at very low reductant flow. These parameters increased in magnitude when increased reductant flow rate and acid concentration

  20. Speciation analysis of arsenic in biological matrices by automated hydride generation-cryotrapping-atomic absorption spectrometry with multiple microflame quartz tube atomizer (multiatomizer). (United States)

    This paper describes an automated system for the oxidation state specific speciation of inorganic and methylated arsenicals by selective hydride generation - cryotrapping- gas chromatography - atomic absorption spectrometry with the multiatomizer. The corresponding arsines are ge...

  1. Validacion y medida de la responsabilidad social en la universidad

    National Research Council Canada - National Science Library

    Maldonado de Guevara, Carmen de la Calle; Garcia Ramos, Jose Manuel; Gimenez Armentia, Pilar; Ortega de la Fuente, Miguel


    La construccion de una escala de medida del grado de Responsabilidad Social del universitario y su validacion como instrumento de medicion del mismo son los objetivos principales de este estudio exploratorio...

  2. Arsenic speciation in natural water samples by coprecipitation-hydride generation atomic absorption spectrometry combination. (United States)

    Tuzen, Mustafa; Citak, Demirhan; Mendil, Durali; Soylak, Mustafa


    A speciation procedure for As(III) and As(V) ions in environmental samples has been presented. As(V) was quantitatively recovered on aluminum hydroxide precipitate. After oxidation of As(III) by using dilute KMnO(4), the developed coprecipitation was applied to determination of total arsenic. Arsenic(III) was calculated as the difference between the total arsenic content and As(V) content. The determination of arsenic levels was performed by hydride generation atomic absorption spectrometry (HG-AAS). The analytical conditions for the quantitative recoveries of As(V) including pH, amount of aluminum as carrier element and sample volume, etc. on the presented coprecipitation system were investigated. The effects of some alkaline, earth alkaline, metal ions and also some anions were also examined. Preconcentration factor was calculated as 25. The detection limits (LOD) based on three times sigma of the blank (N: 21) for As(V) was 0.012 microg L(-1). The satisfactory results for the analysis of arsenic in NIST SRM 2711 Montana soil and LGC 6010 Hard drinking water certified reference materials for the validation of the method was obtained. The presented procedure was successfully applied to real samples including natural waters for arsenic speciation.

  3. Antimony determination and speciation by multisyringe flow injection analysis with hydride generation-atomic fluorescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Semenova, N.V. [Department of Geography, Lomonosov State University, Moscow 119899 (Russian Federation); Leal, L.O. [Department of Chemistry, University of the Balearic Islands, Carretera de Valldemossa, km.7.5, E-07122 Palma de Mallorca (Spain); Forteza, R. [Department of Chemistry, University of the Balearic Islands, Carretera de Valldemossa, km.7.5, E-07122 Palma de Mallorca (Spain); Cerda, V. [Department of Chemistry, University of the Balearic Islands, Carretera de Valldemossa, km.7.5, E-07122 Palma de Mallorca (Spain)]. E-mail:


    A new analytical procedure for determination of inorganic antimony and speciation of antimony(III) and antimony(V) is presented. For this purpose, a software-controlled time-based multisyringe flow injection system, which contains a multisyringe burette provided with a multi-port selection valve, was developed. Hydride generation-atomic fluorescence spectrometry was used as a detection technique. A 0.3% (w/v) reducing sodium tetrahydroborate solution, hydrochloric acid (2 M), an antimony solution and a pre-reducing solution of 10% (w/v) KI and 0.3% (w/v) ascorbic acid are dispensed simultaneously into a gas-liquid separation cell with further propulsion of the reaction product into the flame of an atomic fluorescence spectrometer using argon flow. A hydrogen flow was employed to support the flame. The linear range and the detection limit (3s{sub b}/S) of the proposed technique were 0.2-5.6 {mu}g l{sup -1} and 0.08 {mu}g l{sup -1}, respectively. A sample throughput of 18 samples per hour (corresponding to 80 injections per hour) was achieved. The relative standard deviation for 18 independent measurements was 4.6%. This technique was validated by means of reference solid and water materials with good agreement with the certified values. Satisfactory results for speciation of Sb(III) and Sb(V) by means of the developed technique were obtained.

  4. Bismuth determination in environmental samples by hydride generation-electrothermal atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Moscoso-Perez, Carmen; Moreda-Pineiro, Jorge; Lopez-Mahia, Purificacion; Muniategui-Lorenzo, Soledad; Fernandez-Fernandez, Esther; Prada-Rodriguez, Dario [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071, A Coruna (Spain)


    A hydride generation procedure, via flow injection, coupled to electrothermal atomic absorption spectrometry was optimised for Bi determination in sea water and hot-spring water and acid extracts from coal, coal fly ash and slag samples. The effects of several variables such as hydrochloric acid and sodium tetrahydroborate concentrations, hydrochloric acid and sodium tetrahydroborate flow rates, reaction coil length, trapping and atomisation temperatures, trapping time and the Ar flow rate have been investigated by using a 2{sup 9}*3/128 Plackett-Burman design. From these studies, certain variables (sodium tetrahydroborate concentration and trapping time) showed up as significant, and they were optimised by a 2{sup 2}+star central composite design. In addition, a study of the bismuthine trapping and atomisation efficiency from graphite tubes (GTs) permanently treated with uranium, tantalum, lanthanum oxide, niobium, beryllium oxide, chromium oxide and tantalum carbide were investigated. The results obtained were compared with those achieved by iridium and zirconium-treated GTs. The best analytical performances, with characteristic mass of 35 pg and detection limit of 70 ng l{sup -1}, were achieved by using U-treated GTs. Accuracy were checked using several reference materials: 1643d (Trace Elements in Water), TM-24 (Reference Water), GBW-07401 (Soil) and 1632c (Trace Elements in Coal)

  5. Atomic fluorescence spectrometric determination of trace amounts of arsenic and antimony in drinking water by continuous hydride generation. (United States)

    El-Hadri, F; Morales-Rubio, A; de la Guardia, M


    A highly sensitive and simple method has been developed for the determination of As(III), total As, Sb(III) and total Sb in drinking water samples by continuous hydride generation and atomic fluorescence spectrometry (HGAFS). For As determination, water samples aspirated in a carrier of 2 mol l(-1) HCl were merged with a reducing NaBH(4) 3%(m/v) solution, with sample and NaBH(4) flow rates of 12.5 and 1.5 ml min(-1) respectively. The hydride generated in a 170 cm reaction coil was transported to the detector with an Ar flow of 400 ml min(-1), and a limit of detection between 5 and 20 ng l(-1) was obtained. For Sb determination, 2.5 mol l(-1) HCl and 2%(m/v) NaBH(4) were employed, with respective flow rates of 9.7 and 2 ml min(-1). The hydride generated in a 50 cm reaction coil was transported to the detector with an Ar flow rate of 300 ml min(-1), and a limit of detection between 6 and 14 ng l(-1) was obtained. Determination of the total concentration of these elements was obtained after a previous reduction with KI. Recovery studies of different added concentrations of these species in natural water samples were between 93 and 104% for As(III), 96-103% for As(V), 93-101% for Sb(III) and 90-119% for Sb(V).

  6. Determination of arsenic and selenium by hydride generation and headspace solid phase microextraction coupled with optical emission spectrometry (United States)

    Tyburska, Anna; Jankowski, Krzysztof; Rodzik, Agnieszka


    A hydride generation headspace solid phase microextraction technique has been developed in combination with optical emission spectrometry for determination of total arsenic and selenium. Hydrides were generated in a 10 mL volume septum-sealed vial and subsequently collected onto a polydimethylsiloxane/Carboxen solid phase microextraction fiber from the headspace of sample solution. After completion of the sorption, the fiber was transferred into a thermal desorption unit and the analytes were vaporized and directly introduced into argon inductively coupled plasma or helium microwave induced plasma radiation source. Experimental conditions of hydride formation reaction as well as sorption and desorption of analytes have been optimized showing the significant effect of the type of the solid phase microextraction fiber coating, the sorption time and hydrochloric acid concentration of the sample solution on analytical characteristics of the method developed. The limits of detection of arsenic and selenium were 0.1 and 0.8 ng mL - 1 , respectively. The limit of detection of selenium could be improved further using biosorption with baker's yeast Saccharomyces cerevisiae for analyte preconcentration. The technique was applied for the determination of total As and Se in real samples.

  7. Determination of arsenic and selenium by hydride generation and headspace solid phase microextraction coupled with optical emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Tyburska, Anna; Jankowski, Krzysztof, E-mail:; Rodzik, Agnieszka


    A hydride generation headspace solid phase microextraction technique has been developed in combination with optical emission spectrometry for determination of total arsenic and selenium. Hydrides were generated in a 10 mL volume septum-sealed vial and subsequently collected onto a polydimethylsiloxane/Carboxen solid phase microextraction fiber from the headspace of sample solution. After completion of the sorption, the fiber was transferred into a thermal desorption unit and the analytes were vaporized and directly introduced into argon inductively coupled plasma or helium microwave induced plasma radiation source. Experimental conditions of hydride formation reaction as well as sorption and desorption of analytes have been optimized showing the significant effect of the type of the solid phase microextraction fiber coating, the sorption time and hydrochloric acid concentration of the sample solution on analytical characteristics of the method developed. The limits of detection of arsenic and selenium were 0.1 and 0.8 ng mL{sup -1}, respectively. The limit of detection of selenium could be improved further using biosorption with baker's yeast Saccharomyces cerevisiae for analyte preconcentration. The technique was applied for the determination of total As and Se in real samples.

  8. Advanced chemical hydride-based hydrogen generation/storage system for fuel cell vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Breault, R.W.; Rolfe, J. [Thermo Power Corp., Waltham, MA (United States)


    Because of the inherent advantages of high efficiency, environmental acceptability, and high modularity, fuel cells are potentially attractive power supplies. Worldwide concerns over clean environments have revitalized research efforts on developing fuel cell vehicles (FCV). As a result of intensive research efforts, most of the subsystem technology for FCV`s are currently well established. These include: high power density PEM fuel cells, control systems, thermal management technology, and secondary power sources for hybrid operation. For mobile applications, however, supply of hydrogen or fuel for fuel cell operation poses a significant logistic problem. To supply high purity hydrogen for FCV operation, Thermo Power`s Advanced Technology Group is developing an advanced hydrogen storage technology. In this approach, a metal hydride/organic slurry is used as the hydrogen carrier and storage media. At the point of use, high purity hydrogen will be produced by reacting the metal hydride/organic slurry with water. In addition, Thermo Power has conceived the paths for recovery and regeneration of the spent hydride (practically metal hydroxide). The fluid-like nature of the spent hydride/organic slurry will provide a unique opportunity for pumping, transporting, and storing these materials. The final product of the program will be a user-friendly and relatively high energy storage density hydrogen supply system for fuel cell operation. In addition, the spent hydride can relatively easily be collected at the pumping station and regenerated utilizing renewable sources, such as biomass, natural, or coal, at the central processing plants. Therefore, the entire process will be economically favorable and environmentally friendly.

  9. Flow analysis-hydride generation-gas phase derivative molecular absorption spectrophotometric determination of antimony in antileishmanial drugs

    Directory of Open Access Journals (Sweden)

    Máximo Gallignani


    Full Text Available In the present work, the development of a method based on the coupling of flow analysis (FA, hydride generation (HG, and derivative molecular absorption spectrophotometry (D-EAM in gas phase (GP, is described in order to determine total antimony in antileishmanial products. Second derivative order (D²224nm of the absorption spectrum (190 - 300 nm is utilized as measurement criterion. Each one of the parameters involved in the development of the proposed method was examined and optimized. The utilization of the EAM in GP as detection system in a continuous mode instead of atomic absorption spectrometry represents the great potential of the analytic proposal.

  10. Arsenic speciation by hydride generation-quartz furnace atomic absorption spectrometry. Optimization of analytical parameters and application to environmental samples

    Energy Technology Data Exchange (ETDEWEB)

    Molenat, N.; Astruc, A.; Holeman, M.; Pinel, R. [Laboratoire de Chimie Analytique Bioinorganique et Environnement, Dept. de Chimie, Faculte des Sciences et Techniques, 64 - Pau (France); Maury, G. [Montpellier-2 Univ., 34 (France). Dept. de Chimie Organique Fine


    Analytical parameters of hydride generation, trapping, gas chromatography and atomic absorption spectrometry detection in a quartz cell furnace (HG/GC/QFAAS) device have been optimized in order to develop an efficient and sensitive method for arsenic compounds speciation. Good performances were obtained with absolute detection limits in the range of 0.1 - 0.5 ng for arsenite, arsenate, mono-methyl-arsonic acid (MMAA), dimethyl-arsinic acid (DMAA) and trimethyl-arsine oxide (TMAO). A pH selective reduction for inorganic arsenic speciation was successfully reported. Application to the accurate determination of arsenic compounds in different environmental samples was performed. (authors)

  11. Antimony speciation analysis in sediment reference materials using high-performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Potin-Gautier, M. [Laboratoire de Chimie Analytique, BioInorganique et Environnement LCABIE (UMR CNRS 3054), Universite de Pau et des pays de l' Adour, 64000 Pau (France); Pannier, F. [Laboratoire de Chimie Analytique, BioInorganique et Environnement LCABIE (UMR CNRS 3054), Universite de Pau et des pays de l' Adour, 64000 Pau (France)]. E-mail:; Quiroz, W. [Laboratoire de Chimie Analytique, BioInorganique et Environnement LCABIE (UMR CNRS 3054), Universite de Pau et des pays de l' Adour, 64000 Pau (France); Laboratorio de Quimica Analitica y Ambiental, Instituto de Quimica, Pontificia Universidad catolica de Valparaiso (Chile); Pinochet, H. [Laboratorio de Quimica Analitica y Ambiental, Instituto de Quimica, Pontificia Universidad catolica de Valparaiso (Chile); Gregori, I. de [Laboratorio de Quimica Analitica y Ambiental, Instituto de Quimica, Pontificia Universidad catolica de Valparaiso (Chile)


    This work presents the development of suitable methodologies for determination of the speciation of antimony in sediment reference samples. Liquid chromatography with a post-column photo-oxidation step and hydride generation atomic fluorescence spectrometry as detection system is applied to the separation and determination of Sb(III), Sb(V) and trimethylantimony species. Post-column decomposition and hydride generation steps were studied for sensitive detection with the AFS detector. This method was applied to investigate the conditions under which speciation analysis of antimony in sediment samples can be carried out. Stability studies of Sb species during the extraction processes of solid matrices, using different reagents solutions, were performed. Results demonstrate that for the extraction yield and the stability of Sb species in different marine sediment extracts, citric acid in ascorbic acid medium was the best extracting solution for antimony speciation analysis in this matrix (between 55% and 65% of total Sb was recovered from CRMs, Sb(III) being the predominant species). The developed method allows the separation of the three compounds within 6 min with detection limits of 30 ng g{sup -1} for Sb(III) and TMSbCl2 and 40 ng g{sup -1} for Sb(V) in sediment samples.

  12. Tin Content Determination in Canned Fruits and Vegetables by Hydride Generation Inductively Coupled Plasma Optical Emission Spectrometry

    Directory of Open Access Journals (Sweden)

    Sanda Rončević


    Full Text Available Tin content in samples of canned fruits and vegetables was determined by hydride generation inductively coupled plasma atomic emission spectrometry (HG-ICP-OES, and it was compared with results obtained by standard method of flame atomic absorption spectrometry (AAS. Selected tin emission lines intensity was measured in prepared samples after addition of tartaric acid and followed by hydride generation with sodium borohydride solution. The most favorable line at 189.991 nm showed the best detection limit (1.9 μg L−1 and limit of quantification (6.4 μg kg−1. Good linearity and sensitivity were established from time resolved analysis and calibration tests. Analytical accuracy of 98–102% was obtained by recovery study of spiked samples. Method of standard addition was applied for tin determination in samples from fully protected tinplate. Tin presence at low-concentration range was successfully determined. It was shown that tenth times less concentrations of Sn were present in protected cans than in nonprotected or partially protected tinplate.

  13. Boron Hydrides (United States)


    hydroxide . The compound Is perfectly stable at room temperatures; at approximately 100 C it loses hydrogan slowly and turns from pure white to Gray...hydrides. of nrsc~nic, antirrorýy Ind bianmith ,nd tho alkyl hydrides of zr-c-nlc ,,rc kno%:.n. tho rl1:yl hydridin of etniinony ar~d bismuth have not yet... bismuth hydridv frtim bisnmth ý,hlorido felleod eithor because th.- roduction vnnt to the mot-U or boc.-usc the instability of the hydride- prcvcnt.od

  14. Speciation of arsenic(III)/arsenic(V) and selenium(IV)/ selenium(VI) using coupled ion chromatography - hydride generation atomic absorption spectrometry (United States)

    Simple analytical methods have been developed to speciate inorganic arsenic and selenium in the ppb range using coupled ion chromatography-hydride generation atomic absorption spectrometry. Because of the differences in toxicity and adsorption behavior, determinations of the redox states arsenite A...

  15. Determination of bismuth by dielectric barrier discharge atomic absorption spectrometry coupled with hydride generation: Method optimization and evaluation of analytical performance

    Czech Academy of Sciences Publication Activity Database

    Kratzer, Jan; Boušek, J.; Sturgeon, R. E.; Mester, Z.; Dědina, Jiří


    Roč. 86, č. 19 (2014), s. 9620-9625 ISSN 0003-2700 Grant - others:GA AV ČR(CZ) M200311202 Institutional support: RVO:68081715 Keywords : dielectric barrier discharge * hydride generation * atomic absorption spectrometry Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 5.636, year: 2014

  16. Design and evaluation of a continuous flow, integrated nebulizer-hydride generator for flame atomic absorption spectrometry

    Directory of Open Access Journals (Sweden)

    Miguel Murillo


    Full Text Available An evaluation of the performance of a continuous flow hydride generator-nebulizer for flame atomic absorption spectrometry was carried out. Optimization of nebulizer gas flow rate, sample acid concentration, sample and tetrahydroborate uptake rates and reductant concentration, on the As and Se absorbance signals was carried out. A hydrogen-argon flame was used. An improvement of the analytical sensitivity relative to the conventional bead nebulizer used in flame AA was obtained (2 (As and 4.8 (Se µg L-1. Detection limits (3σb of 1 (As and 1.3 (Se µg L-1 were obtained. Accuracy of the method was checked by analyzing an oyster tissue reference material.

  17. [Hydride generation-AFS determination of trace arsenic, antimony, selenium and mercury in Chinese herbal medicine in Qinghaixizang plateau]. (United States)

    Suo, Y


    In this paper, a hydride generation non-dispersive atomic fluorescence spectrometry method has been developed for the determination of trace arsenic, antimony, selenium and mercury in Chinese herbal medicine in Qinghai-Xizang plateau. Under the optimum condition, the quantities of fourteen interference elements are below certain non-interferent limits. The detection limits were as follow (g/mL): As 1.3, Sb 0.39, Se 0.24 and Hg 0.44. The relative standard deviation of 9 determination was As 2.4-4.2%, Sb 2.5-5.6%, Se 3.1-5.0% and Hg 3.8-5.9%. The recovery of four elements was 94.7-105.4%. This method is simple, rapid, sensitive and accurate, and has been successfully tested with As, Sb, Se and Hg in more than 20 kinds of Chinese herbal medicine in Qinghai-Xizang plateau.

  18. An analysis of hydrogen production from ammonia hydride hydrogen generators for use in military fuel cell environments (United States)

    Sifer, Nicholas; Gardner, Kristopher

    In an effort to simultaneously improve upon existing power storage and generation devices while supplying America's war fighters with state-of-the-art equipment, the US military has focused on fuel cell technology for several military applications. These applications include soldier and sensor power (0-100 W) and auxiliary power units (500-3000 W). Over the past few years, the fuel cell industry has realized remarkable decreases in the size and weight of proton exchange membrane (PEM) fuel cell systems. However, a safe and affordable means of storing and generating hydrogen does not yet exist to justify their transition into the field. In order to assess the hydrogen storage capacity and hydrogen generation rates of ammonia (NH 3) based systems, the US Army Communications-Electronics Research, Development, and Engineering Center (CERDEC), tested several ammonia hydride hydrogen generator systems built by Hydrogen Components Inc. (HCI). Experimental results and analysis illustrate that while there are developments necessary at the sub-system level, the hydrogen generators are ideal energy storage devices for low power (5 W) operations over wide temperature ranges. The results show that the hydrogen generators are capable of operating autonomously for over 50+ h of operation (at a 5 W load) and producing hydrogen delivery system energy densities of 480 Wh/kg.

  19. The determination of antimony and arsenic concentrations in fly ash by hydride generation inductively coupled plasma optical emission spectrometry. (United States)

    Ilander, Aki; Väisänen, Ari


    Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) was used in the determination of As and Sb concentrations in fly ash samples. The effect of sample pre-treatment reagents and measurement parameters used for hydride generation was evaluated. Due to memory effects observed, the appropriate read delay time was adjusted to 60s resulting in RSDs 0.6% and 2.3% for As and Sb, respectively. The most suitable volumes of pre-reduction reagents for 10 mL of sample were 4 mL of KI/ascorbic acid (5%) and 6 mL of HCl (conc.). The determination of Sb was significantly interfered by HF, but the interference could be eliminated by adding 2 mL of saturated boric acid and heating the samples to 60°C at least 45 min. The accuracy of the method was studied by analyses of SRM 1633b and two fly ash samples with the recovery test of added As and Sb. As high a recovery as 96% for SRM 1633b was reached for As using 193.696 nm with two-step ultrasound-assisted digestion. A recovery rate of 103% was obtained for Sb using 217.582 nm and the pre-reduction method with the addition of 2 mL of saturated boric acid and heating. The quantification limits for the determination of As and Sb in the fly ash samples using two-step ultrasound-assisted digestion followed with HG-ICP-OES were 0.89 and 1.37 mg kg(-1), respectively. Copyright © 2011 Elsevier B.V. All rights reserved.

  20. Enhanced Hydrogen Generation Properties of MgH2-Based Hydrides by Breaking the Magnesium Hydroxide Passivation Layer

    Directory of Open Access Journals (Sweden)

    Liuzhang Ouyang


    Full Text Available Due to its relatively low cost, high hydrogen yield, and environmentally friendly hydrolysis byproducts, magnesium hydride (MgH2 appears to be an attractive candidate for hydrogen generation. However, the hydrolysis reaction of MgH2 is rapidly inhibited by the formation of a magnesium hydroxide passivation layer. To improve the hydrolysis properties of MgH2-based hydrides we investigated three different approaches: ball milling, synthesis of MgH2-based composites, and tuning of the solution composition. We demonstrate that the formation of a composite system, such as the MgH2/LaH3 composite, through ball milling and in situ synthesis, can improve the hydrolysis properties of MgH2 in pure water. Furthermore, the addition of Ni to the MgH2/LaH3 composite resulted in the synthesis of LaH3/MgH2/Ni composites. The LaH3/MgH2/Ni composites exhibited a higher hydrolysis rate—120 mL/(g·min of H2 in the first 5 min—than the MgH2/LaH3 composite— 95 mL/(g·min—without the formation of the magnesium hydroxide passivation layer. Moreover, the yield rate was controlled by manipulation of the particle size via ball milling. The hydrolysis of MgH2 was also improved by optimizing the solution. The MgH2 produced 1711.2 mL/g of H2 in 10 min at 298 K in the 27.1% ammonium chloride solution, and the hydrolytic conversion rate reached the value of 99.5%.

  1. Activated aluminum hydride hydrogen storage compositions and uses thereof

    Energy Technology Data Exchange (ETDEWEB)

    Sandrock, Gary (Ringwood, NJ); Reilly, James (Bellport, NY); Graetz, Jason (Mastic, NY); Wegrzyn, James E. (Brookhaven, NY)


    In one aspect, the invention relates to activated aluminum hydride hydrogen storage compositions containing aluminum hydride in the presence of, or absence of, hydrogen desorption stimulants. The invention particularly relates to such compositions having one or more hydrogen desorption stimulants selected from metal hydrides and metal aluminum hydrides. In another aspect, the invention relates to methods for generating hydrogen from such hydrogen storage compositions.

  2. Development of a MSFIA system for sequential determination of antimony, arsenic and selenium using hydride generation atomic fluorescence spectrometry. (United States)

    de Santana, Fernanda A; Portugal, Lindomar A; Serra, Antonio M; Ferrer, Laura; Cerdà, Víctor; Ferreira, Sergio L C


    This paper proposed a multisyringe flow injection analysis (MSFIA) system for antimony, arsenic and selenium determination in peanut samples by hydride generation atomic fluorescence spectrometry (HG-AFS). The optimization step of the hydride generation was performed using a two-level full factorial design involving the parameters: hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations. So, using the chemical conditions optimized, this method allows the determination of these elements employing the external calibration technique using aqueous standards with limits of detection and quantification of 0.04 and 0.14µgL(-1) for antimony, 0.04 and 0.14µgL(-1) for arsenic and 0.14 and 0.37µgL(-1) for selenium, respectively. Additionally, the effect of vanadium, chromium, cobalt, nickel, zinc, copper, iron and molybdenum on the generation of chemical vapour was also studied. The precision expressed as relative standard deviation varied from 1.2 to 3.6% for antimony, 1.8-3.9% for arsenic and 1.8-2% for selenium. The accuracy for arsenic and selenium was confirmed using the certified peach leaves reference material SRM 1547 produced by National Institute of Standard and Technology. The proposed method showed 45 injection throughput (h(-1)) using 1.6mL sample volume for each element, 0.8mL NaBH4 0.5% (w/v) containing NaOH 0.05% (w/v), 0.8mL HCl 5M and 0.4mL KI 14% (w/v) containing L-ascorbic acid 2.5% (w/v). The method was applied to the determination of antimony, arsenic and selenium in peanut samples, which were firstly lyophilized and afterward digested using microwave assisted radiation. Six samples were analyzed and the contents of the elements found were: 28.7-41.3µgkg(-1) for arsenic, 86.4-480.1µgkg(-1) for selenium and 32.6-52.4µgkg(-1) for antimony. Addition/recovery tests were also performed to confirm the method accuracy for the three elements. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Electrolytic hydride generation atomic absorption spectrometry for the determination of antimony, arsenic, selenium, and tin--mechanistic aspects and figures of merit. (United States)

    Denkhaus, E; Beck, F; Bueschler, P; Gerhard, R; Golloch, A


    This article deals with the electrocatalytic and electrochemical mechanisms of hydride formation and their dependence on hydrogen overvoltage. A three-electrode-arrangement was used to determine the hydrogen overvoltage of different cathode materials (Pt, Au, Ag, glassy carbon, Cd, Pb, amalgamated Ag). The applicability of these cathode materials was tested for hydride formation using As(III), As(V), Sb(III), Sb(V), Se(IV), and Sn(IV). Glassy carbon is the most suitable cathode material for hydride generation with As(III), Sb(III), Se(IV), and Sn(IV). Hg-Ag is well suited for the production of stibine and arsine. As(III), As(V), Sb(III), and Sb(V) were all converted into their hydrides with efficiencies > 90%. A detection limit in the range of 0.11-0.13 microg L(-1) for As and Sb (sample volume 200 microL) was obtained for cathode materials with a high hydrogen overvoltage. The precision of replicate measurements was better than 5% calculated as variation coefficient. The accuracy of the presented method was verified by analysis of certified reference materials and tissues of cancer patients. The recovery rates for As and Se were calculated to be 93-108%.

  4. Automated system for on-line determination of dimethylarsinic and inorganic arsenic by hydride generation-atomic fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Chaparro, L.L.; Leal, L.O. [Renewable Energy and Environmental Protection Department, Advanced Materials Research Center (CIMAV), Chihuahua, Chihuahua (Mexico); Ferrer, L.; Cerda, V. [University of the Balearic Islands, Department of Chemistry, Palma de Mallorca (Spain)


    A multisyringe flow-injection approach has been coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS) with UV photo-oxidation for dimethylarsinic (DMA), inorganic As and total As determination, depending on the pre-treatment given to the sample (extraction or digestion). The implementation of a UV lamp allows on-line photo-oxidation of DMA and the following arsenic detection, whereas a bypass leads the flow directly to the HG-AFS system, performing inorganic arsenic determination. DMA concentration is calculated by the difference of total inorganic arsenic and measurement of the photo-oxidation step. The detection limits for DMA and inorganic arsenic were 0.09 and 0.47 {mu}g L{sup -1}, respectively. The repeatability values accomplished were of 2.4 and 1.8 %, whereas the injection frequencies were 24 and 28 injections per hour for DMA and inorganic arsenic, respectively. This method was validated by means of a solid reference material BCR-627 (muscle of tuna) with good agreement with the certified values. Satisfactory results for DMA and inorganic arsenic determination were obtained in several water matrices. The proposed method offers several advantages, such as increasing the sampling frequency, low detection limits and decreasing reagents and sample consumption, which leads to lower waste generation. (orig.)

  5. Speciation of arsenic in baby foods and the raw fish ingredients using liquid chromatography-hydride generation-atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Vinas, P.; Lopez-Garcia, I.; Merino-Merono, B.; Campillo, N.; Hernandez-Cordoba, M. [Murcia Univ. (Spain). Dept. of Analytical Chemistry


    The speciation of arsenic in different baby foods and the raw fish ingredients using the direct hybridisation of liquid chromatography (LC) and hydride generation atomic absorption spectrometry (HGAAS) is described. Good resolution of the species, arsenic(III), dimethylarsinic acid (DMAA), monomethylarsenic acid (MMAA) and arsenic(V) is achieved using an anion-exchange column with potassium phosphate as the mobile phase and gradient elution. Arsenobetaine (AsB) is determined by on-line oxidation using peroxydisulphate and hydride generation. The arsenicals were extracted by an enzymatic digestion procedure based on the action of trypsin or pancreatin. Arsenobetaine was the only arsenic species detected. The reliability of the procedure was checked by analyzing the total arsenic content of the samples by electrothermal atomic absorption spectrometry with microwave-oven digestion and by analyzing a certified reference material. The arsenic content in the baby foods comes from the raw fish ingredients and is highest when plaice is used. (orig.)

  6. Trace element analysis of humus-rich natural water samples:method development for UV-LED assisted photocatalytic sample preparation and hydride generation ICP-MS analysis


    Havia, J. (Johanna)


    Abstract Humus-rich natural water samples, containing high concentrations of dissolved organic carbon (DOC), are challenging for certain analytical methods used in trace element analysis, including hydride generation methods and electrochemical methods. In order to obtain reliable results, the samples must to be pretreated to release analytes from humic acid complexes prior to the determination. In this study, methods for both pretreatment and analysis steps were developed. Arsenic is ...

  7. Determination of total arsenic in fish by hydride-generation atomic absorption spectrometry: method validation, traceability and uncertainty evaluation (United States)

    Nugraha, W. C.; Elishian, C.; Ketrin, R.


    Fish containing arsenic compound is one of the important indicators of arsenic contamination in water monitoring. The high level of arsenic in fish is due to absorption through food chain and accumulated in their habitat. Hydride generation (HG) coupled with atomic absorption spectrometric (AAS) detection is one of the most popular techniques employed for arsenic determination in a variety of matrices including fish. This study aimed to develop a method for the determination of total arsenic in fish by HG-AAS. The method for sample preparation from American of Analytical Chemistry (AOAC) Method 999.10-2005 was adopted for acid digestion using microwave digestion system and AOAC Method 986.15 - 2005 for dry ashing. The method was developed and validated using Certified Reference Material DORM 3 Fish Protein for trace metals for ensuring the accuracy and the traceability of the results. The sources of uncertainty of the method were also evaluated. By using the method, it was found that the total arsenic concentration in the fish was 45.6 ± 1.22 mg.Kg-1 with a coverage factor of equal to 2 at 95% of confidence level. Evaluation of uncertainty was highly influenced by the calibration curve. This result was also traceable to International Standard System through analysis of Certified Reference Material DORM 3 with 97.5% of recovery. In summary, it showed that method of preparation and HG-AAS technique for total arsenic determination in fish were valid and reliable.

  8. Determination of total selenium in pharmaceutical and herbal supplements by hydride generation and graphite furnace atomic absorption spectrometry. (United States)

    Kazi, Tasneem G; Kolachi, Nida F; Afridi, Hassan I; Brahman, Kapil Dev; Shah, Faheem


    The total selenium (Se) was determined in herbal and pharmaceutical supplements used for liver diseases. The total Se contents were determined in different pharmaceutical and herbal supplements by hydride generation atomic absorption spectrometry (HGAAS) and graphite furnace atomic absorption spectrometry (GFAAS) after microwave-assisted acid digestion. The accuracy of the techniques was evaluated by using certified reference material and the standard addition method. The recoveries of total Se were 99.4 and 99.0% for HGAAS and GFAAS, respectively. The precision of the techniques expressed as RSD were 2.34 and 4.54% for HGAAS and GFAAS measurements, respectively. The LOD values for HGAAS and GFAAS were 0.025 and 0.052 pglg, respectively. The concentrations of Se in pharmaceutical and herbal supplements were found in the range of 19.2-53.8 and 25.0-42.5 pg/g, respectively, corresponding to 35-76% and 45-76% of the total recommended dose of Se for adults.

  9. Slurry sampling hydride generation atomic absorption spectrometry for the determination of extractable/soluble As in sediment samples (United States)

    Mierzwa, Jerzy; Dobrowolski, Ryszard


    A method combining the sampling of slurry pretreated by ultrasonic agitation and microwave assisted extraction with hydride generation atomic absorption spectrometry (HGAAS) for the determination of arsenic in sediment samples is proposed and evaluated. The pretreatment of slurried samples by ultrasonication enabled the extraction of (approximately) up to 85% of arsenic from the studied sediment samples. The further (slight) improvement of the efficiency of extraction was accomplished by the introduction of a short microwave-accelerated treatment. L-cysteine was used as an efficient pre-reduction reagent. The accuracy and precision of the slurry sampling HGAAS method were studied using the certified reference materials: Sediment GBW 30043 (NRCCRM, People's Republic of China), Sediment NIST 2704 (NIST, USA) and Marine Sediment BCSS-1 (NRCC, Canada). The relative standard deviation of the full (overall) analytical procedure was 8.5% and an absolute limit of detection of 2.75 ng was achieved. Factors which influence the reliability of this method are, for example, the choice of slurry liquid phase (extraction medium), sample homogeneity and, in particular, very effective mixing of slurries.

  10. Determination of inorganic arsenic and its organic metabolites in urine by flow-injection hydride generation atomic absorption spectrometry. (United States)

    Hanna, C P; Tyson, J F; McIntosh, S


    A method has been developed for the determination of inorganic arsenic [As(III) and As(V)] and its organic metabolites (monomethylarsenic and dimethylarsenic) in urine by flow-injection hydride generation atomic absorption spectrometry. The nontoxic seafood-derived arsenobetaine and arsenocholine species were first separated by a solid-phase extraction procedure. The remaining sample was digested with a mixture of nitric and sulfuric acids and potassium dichromate, followed by attack with hydrogen peroxide. The resulting As(V) was reduced to As(III) with potassium iodide in hydrochloric acid before injection into the flow-injection manifold. The percentage analytical recoveries (mean +/- 95% confidence interval) of various arsenic species added to a urine specimen at 250 micrograms/L were 108 +/- 2, 112 +/- 11, 104 +/- 7, and 95 +/- 5 for As(III), As(V), monomethylarsenic, and dimethylarsenic, respectively. For the determination of arsenic in Standard Reference Material 2670 (toxic metals in human urine), results agreed with the certified value (480 +/- 100 micrograms/L). Analyses of samples for the Centre de Toxicologie du Quebec, containing seafood-derived species, demonstrated the viability of the separation procedure. Detection limits were between 0.1 and 0.2 microgram/L in the solution injected into the manifold, and precision at 10 micrograms/L was between 2% and 3% (CV). These preliminary results show that the method might be applicable to determinations of arsenic in a range of clinical urine specimens.

  11. [Direct determination of selenium and bismuth in antimony and antimony compound by hydride generation-atomic fluorescence spectrometry]. (United States)

    Li, Z X; Tong, K Y; Guo, X W


    The interference of Sb in determination of Se and Bi in antimony powder and antimony compound has been studied in different acidity, it is found that the interference of antimony has been reduced apparently in high acidity. Simultaneously, according to the difference of hydride generation reaction between Sb5+ and Sb3+, a sensitive and rapid method has been developed and used to determine Se and Bi in real samples. The recovery of the method is 95%-105% for practical samples. Detection limits are 0.00004 x 10(-2) (content) for Se and 0.0001 x 10(-2) mg.L-1 (content) for Bi respectively. The relative standard deviations of Se are 2.4% (content = 0.00169 x 10(-2) mg.L-1) and 5.4% (content = 0.00056 x 10(-2) mg.L-1). The relative standard deviations of Bi are 5.0% (content = 0.00024 x 10(-2) mg.L-1) and 1.3% (content = 0.00229 x 10(-2) mg.L-1). The method has been applied to determination of Se and Bi in practical samples with satisfactory results.

  12. Determination of arsenite, arsenate, monomethylarsonic acid and dimethylarsinic acid in cereals by hydride generation atomic fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Matos Reyes, M.N. [Department of Analytical Chemistry, University of Valencia, 50 Dr. Moliner Street, 46100 Burjassot, Valencia (Spain); Department of Chemistry, Pontificia Universidade Catolica do Rio de Janeiro, Rua Marques de Sao Vicente, 225, 22453-900, Rio de Janeiro, RJ (Brazil); Cervera, M.L. [Department of Analytical Chemistry, University of Valencia, 50 Dr. Moliner Street, 46100 Burjassot, Valencia (Spain)], E-mail:; Campos, R.C. [Department of Chemistry, Pontificia Universidade Catolica do Rio de Janeiro, Rua Marques de Sao Vicente, 225, 22453-900, Rio de Janeiro, RJ (Brazil); Guardia, M. de la [Department of Analytical Chemistry, University of Valencia, 50 Dr. Moliner Street, 46100 Burjassot, Valencia (Spain)


    A fast, sensitive and simple non-chromatographic analytical method was developed for the speciation analysis of toxic arsenic species in cereal samples, namely rice and wheat semolina. An ultrasound-assisted extraction of the toxic arsenic species was performed with 1 mol L{sup -1} H{sub 3}PO{sub 4} and 0.1% (m/v) Triton XT-114. After extraction, As(III), As(V), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) concentrations were determined by hydride generation atomic fluorescence spectrometry using a series of proportional equations corresponding to four different experimental reduction conditions. The detection limits of the method were 1.3, 0.9, 1.5 and 0.6 ng g{sup -1} for As(III), As(V), DMA and MMA, respectively, expressed in terms of sample dry weight. Recoveries were always greater than 90%, and no species interconversion occurred. The speciation analysis of a rice flour reference material certified for total arsenic led to coherent results, which were also in agreement with other speciation studies made on the same certified reference material.

  13. On-line pre-reduction of Se(VI) by thiourea for selenium speciation by hydride generation

    Energy Technology Data Exchange (ETDEWEB)

    Qiu Jianhua [Department of Chemistry and the MOE Key Laboratory of Analytical Sciences, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); Wang Qiuquan [Department of Chemistry and the MOE Key Laboratory of Analytical Sciences, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian 361005 (China)]. E-mail:; Ma Yuning [Department of Chemistry and the MOE Key Laboratory of Analytical Sciences, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); Yang Limin [Department of Chemistry and the MOE Key Laboratory of Analytical Sciences, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); Huang Benli [Department of Chemistry and the MOE Key Laboratory of Analytical Sciences, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian 361005 (China)


    In this study, thiourea (TU) was novelly developed as a reduction reagent for on-line pre-reduction of selenium(VI) before conventional hydride generation (HG) by KBH{sub 4}/NaOH-HCl. After TU on-line pre-reduction, the HG efficiency of Se(VI) has been greatly improved and because even higher than that of the same amount of Se(IV) obtained in the conventional HG system. The possible pre-reduction mechanism is discussed. The detection limit (DL) of selenate reaches 10 pg mL{sup -1} when using on-line TU pre-reduction followed by HG atomic fluorescence detection. When TU pre-reduction followed by HG is used as an interface between ion-pair high performance liquid chromatography and atomic fluorescence spectrometry, selenocystine, selenomethionine, selenite and selenate can be measured simultaneously and quantitatively. The DLs of these are 0.06, 0.08, 0.05 and 0.04 ng mL{sup -1}, respectively, and the relative standard deviations of 9 duplicate runs for all the 4 species are less than 5%. Furthermore, it was successfully applied to Se speciation analysis of cultured garlic samples, and validated by determination of total selenium and selenium species in certified reference material NIST 1946.

  14. Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

    Energy Technology Data Exchange (ETDEWEB)

    Moscoso-Perez, Carmen [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Moreda-Pineiro, Jorge [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain)]. E-mail:; Lopez-Mahia, Purificacion [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Muniategui-Lorenzo, Soledad [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Fernandez-Fernandez, Esther [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Prada-Rodriguez, Dario [Department of Analytical Chemistry, Faculty of Sciences, University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain)


    A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2{sup n} + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 x 10{sup -3} to 0.2 ng m{sup -3} have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruna city (NW Spain)

  15. Determination of arsenic in geological materials by electrothermal atomic-absorption spectrometry after hydride generation (United States)

    Sanzolone, R.F.; Chao, T.T.; Welsch, E.P.


    Rock and soil samples are decomposed with HClO4-HNO3; after further treatment, arsine is generated and absorbed in a dilute silver nitrate solution. Aliquots of this solution are injected into a carbon rod atomizer. Down to 1 ppm As in samples can be determined and there are no significant interferences, even from chromium in soils. Good results were obtained for geochemical reference samples. ?? 1979.

  16. Cloud point extraction for trace inorganic arsenic speciation analysis in water samples by hydride generation atomic fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shan, E-mail:; Wang, Mei, E-mail:; Zhong, Yizhou, E-mail:; Zhang, Zehua, E-mail:; Yang, Bingyi, E-mail:


    A new cloud point extraction technique was established and used for the determination of trace inorganic arsenic species in water samples combined with hydride generation atomic fluorescence spectrometry (HGAFS). As(III) and As(V) were complexed with ammonium pyrrolidinedithiocarbamate and molybdate, respectively. The complexes were quantitatively extracted with the non-ionic surfactant (Triton X-114) by centrifugation. After addition of antifoam, the surfactant-rich phase containing As(III) was diluted with 5% HCl for HGAFS determination. For As(V) determination, 50% HCl was added to the surfactant-rich phase, and the mixture was placed in an ultrasonic bath at 70 °C for 30 min. As(V) was reduced to As(III) with thiourea–ascorbic acid solution, followed by HGAFS. Under the optimum conditions, limits of detection of 0.009 and 0.012 μg/L were obtained for As(III) and As(V), respectively. Concentration factors of 9.3 and 7.9, respectively, were obtained for a 50 mL sample. The precisions were 2.1% for As(III) and 2.3% for As(V). The proposed method was successfully used for the determination of trace As(III) and As(V) in water samples, with satisfactory recoveries. - Highlights: • Cloud point extraction was firstly established to determine trace inorganic arsenic(As) species combining with HGAFS. • Separate As(III) and As(V) determinations improve the accuracy. • Ultrasonic release of complexed As(V) enables complete As(V) reduction to As(III). • Direct HGAFS analysis can be performed.

  17. Quantifying uncertainty in the measurement of arsenic in suspended particulate matter by Atomic Absorption Spectrometry with hydride generator

    Directory of Open Access Journals (Sweden)

    Ahuja Tarushee


    Full Text Available Abstract Arsenic is the toxic element, which creates several problems in human being specially when inhaled through air. So the accurate and precise measurement of arsenic in suspended particulate matter (SPM is of prime importance as it gives information about the level of toxicity in the environment, and preventive measures could be taken in the effective areas. Quality assurance is equally important in the measurement of arsenic in SPM samples before making any decision. The quality and reliability of the data of such volatile elements depends upon the measurement of uncertainty of each step involved from sampling to analysis. The analytical results quantifying uncertainty gives a measure of the confidence level of the concerned laboratory. So the main objective of this study was to determine arsenic content in SPM samples with uncertainty budget and to find out various potential sources of uncertainty, which affects the results. Keeping these facts, we have selected seven diverse sites of Delhi (National Capital of India for quantification of arsenic content in SPM samples with uncertainty budget following sampling by HVS to analysis by Atomic Absorption Spectrometer-Hydride Generator (AAS-HG. In the measurement of arsenic in SPM samples so many steps are involved from sampling to final result and we have considered various potential sources of uncertainties. The calculation of uncertainty is based on ISO/IEC17025: 2005 document and EURACHEM guideline. It has been found that the final results mostly depend on the uncertainty in measurement mainly due to repeatability, final volume prepared for analysis, weighing balance and sampling by HVS. After the analysis of data of seven diverse sites of Delhi, it has been concluded that during the period from 31st Jan. 2008 to 7th Feb. 2008 the arsenic concentration varies from 1.44 ± 0.25 to 5.58 ± 0.55 ng/m3 with 95% confidence level (k = 2.

  18. New considerations about the separation and quantification of antimony species by ion chromatography-hydride generation atomic fluorescence spectrometry. (United States)

    Miravet, R; López-Sánchez, J F; Rubio, R


    A new method for the speciation of inorganic [Sb(III) and Sb(V)] and organic (Me3SbCl2) antimony species by using a polystyrene-divinylbenzene-based anion-exchange HPLC column (Hamilton PRP-X100) coupled to hydride generation atomic fluorescence spectrometry (HG-AFS) is presented. Several mobile phases were tested for the baseline separation of these three antimony species, investigating in detail experimental parameters such as concentration and pH. The best efficiency and resolution was achieved by using a gradient elution between diammonium tartrate 250 mmol l(-1) pH 5.5 (A) and KOH 20 mmol l(-1) pH 12 (B). The gradient programme used was 100% B for 1.5 min, decreasing to 0% B in 0.1 min and maintained the elution with 100% A for 5.5 min. Analysis time was less than 7 min. Equilibration of the column with the complexing mobile phase was found to be critical in order to avoid Sb(III) double peak formation. Dilution in diammonium tartrate medium was necessary in order to avoid Sb(III) oxidation at microg l(-1) concentration level. Detection limits of 0.06 microg l(-1) for Sb(V), 0.09 microg l(-1) for Me3SbCl2 and 0.04 microg l(-1) for Sb(III) as well as repeatability and reproducibility better than 5% R.S.D. (n = 10) and 9% R.S.D. (n = 30) (for 1 and 5 microg l(-1) of Sb(V) and Sb(III) and 5 and 10 microg l(-1) of Me3SbCl2) were obtained. Accuracy and recovery studies were carried out by analysing one river freshwater sample and two water certified reference materials. The proposed methodology can be considered reliable and straightforward for antimony speciation in fresh water samples.

  19. [Determination of trace selenium in plants by hydride generation atomic fluorescence spectrometry with program temperature-controlled graphite digestion]. (United States)

    Qian, Wei; Jiang, Qian; Wang, Ru-Hai; Gong, Hua; Han, Yong


    Discussed several methods of pretreatment for the determination of selenium were discussed, and a program temperature-controlled graphite digestion method was developed to digest 5 kinds of representative standard plant samples of citrus leaves, tea, cabbage leaves, shrubs and rice. The effect of the pretreatment method of digestion solution, digestion temperature and digestion time on the extraction of selenium was investigated in detail. The instrumental working parameters were optimized. For the reaction conditions of hydride generation atomic fluorescence spectrometry (HG-AFS), the effect of the concentration of KBH4 and HCl on the determination of selenium was emphasized. Not only the effect of the concentration of carrier flow HCl was considered, but also the effect of the concentration of sample HCl on the determination of selenium was studied. The best method for determination of trace selenium in plant samples by atomic fluorescence spectrometry with program temperature-controlled graphite digestion was established. Results indicated that the recovery of the method of selenium was 87.1% - 106.2%, the detection limit was 0.018 microg x L(-1) and the relative standard deviation (RSD) was less than 6.0%. In the range of 0-10 microg x L(-1) (low standard) and 0-100 microg x L(-1) (high standard) fluorescence was linearly related to the concentration of selenium, the coefficient of r was 0.9999 and r was 0.9997. Therefore, this method has wide linear range, high sensitivity, low detection limit and good stability, which was very suitable for the determination of trace selenium of plant. And the method was of easy and safe operation, strong practicability, low cost, and low toxicity of chemicals used, so it can be used as a routine analysis method in general laboratory.

  20. Gestion de la validacion de metodos analiticos de control de calidad del centro de inmunologia molecular

    National Research Council Canada - National Science Library

    Ramos Diaz, Frank; Fontanet Tamayo, Lizette; Delgado Fernandez, Mercedes


    Este articulo propone un Procedimiento que permite planificar, ejecutar y controlar la validacion de los metodos analiticos en el Departamento de Control de Calidad del Centro de Inmunologia Molecular...

  1. Arsenic speciation in environmental samples by hydride generation and electrothermal atomic absorption spectrometry. (United States)

    Anawar, Hossain Md


    For the past few years many studies have been performed to determine arsenic (As) speciation in drinking water, food chain and other environmental samples due to its well-recognized carcinogenic and toxic effects relating to its chemical forms and oxidation states. This review provides an overview of analytical methods, preconcentration and separation techniques, developed up to now, using HGAAS and ETAAS for the determination of inorganic As and organoarsenic species in environmental samples. Specific advantages, disadvantages, selectivity, sensitivity, efficiency, rapidity, detection limit (DL), and some aspects of recent improvements and modifications for different analytical and separation techniques, that can define their application for a particular sample analysis, are highlighted. HG-AAS has high sensitivity, selectivity and low DL using suitable separation techniques; and it is a more suitable, affordable and much less expensive technique than other detectors. The concentrations of HCl and NaBH(4) have a critical effect on the HG response of As species. Use of l-cysteine as pre-reductant is advantageous over KI to obtain the same signal response for different As species under the same, optimum and mild acid concentration, and to reduce the interference of transition metals on the arsine generation. Use of different pretreatment, digestion, separation techniques and surfactants can determine As species with DL from ngL(-1) to μgL(-1). Out of all the chromatographic techniques coupled with HGAAS/ETAAS, ion-pair reversed-phase chromatography (IP-RP) is the most popular due to its higher separation efficiency, resolution selectivity, simplicity, and ability to separate up to seven As species for both non-ionic and ionic compounds in a signal run using the same column and short time. However, a combination of anion- and cation-exchange chromatography seems the most promising for complete resolution up to eight As species. The ETAAS method using different

  2. Redox speciation analysis of antimony in soil extracts by hydride generation atomic fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Fuentes, Edwar; Pinochet, Hugo; Gregori, Ida de E-mail:; Potin-Gautier, Martine


    A sensitive atomic spectrometric method for the redox speciation analysis of antimony in soils is described. The method is based on the selective generation of stibine from Sb(III) in a continuous flow system using atomic fluorescence spectrometry for detection. Sb(V) is masked by citric or oxalic acid in HCl medium. The procedure was optimized with synthetic solutions of Sb(III) and Sb(V). The effect of carboxylic acid and HCl concentration on the recovery of Sb(III) and Sb(V) species from standard solutions, and on the fluorescence signal were studied. Both species were extracted from soil with H{sub 2}O, 0.05 mol l{sup -1} EDTA and 0.25 mol l{sup -1} H{sub 2}SO{sub 4}. Since the soil samples were collected from sites impacted by copper mining activities, the effect of Cu{sup 2+} on the determination of antimony in synthetic solutions and soil extracts was studied. Cu{sup 2+} decreased the Sb(III) signal, but had no effect on the total antimony determination. Therefore, the selective determination of Sb(III) was carried out in citric acid-HCl medium, using the analyte addition technique. Total antimony in soil extracts was determined using the standard calibration technique after reducing Sb(V) to Sb(III) at room temperature with KI-ascorbic acid. The Sb(V) concentration was calculated from the difference between total antimony and Sb(III). The limits of detection (PS Analytical, Excalibur Millennium model) were 17 and 10 ng l{sup -1} for Sb(III) and total antimony, respectively, and the R.S.D. at the 0.5-{mu}g l{sup -1} level were 2.5 and 2.4%, respectively. The total antimony concentration of soils is in the mg kg{sup -1} range; the Sb recovery from the different soils by the extracting solutions was between less than 0.02% and approximately 10%. Similar recoveries were obtained using EDTA and sulfuric acid solutions. Sb(V) was found to be the main antimony species extracted from soils.

  3. Investigations into the Role of Modifiers for Entrapment of Hydrides in Flow Injection Hydride Generation Electrothermal Atomic Absorption Spectrometry as Exemplified for the Determination of Germanium

    DEFF Research Database (Denmark)

    Hilligsøe, Bo; Andersen, Jens Enevold Thaulov; Hansen, Elo Harald


    Pd-conditioned graphite tubes, placed in the furnace of an atomic absorption spectrometry instrument, are used for entrapment of germane as generated in an associated flow injection system. Two different approaches are tested with the ultimate aim to allow multiple determinations, that is, introd...

  4. Design and application of a novel integrated electrochemical hydride generation cell for the determination of arsenic in seaweeds by atomic fluorescence spectrometry. (United States)

    Jiang, Xian-Juan; Gan, Wu-Er; Han, Su-Ping; Zi, Hong-Jing; He, You-Zhao


    An integrated electrochemical hydride generation cell, mainly composed of three components (a gas liquid separator, a graphite tube cathode and a reticulate Pt wire anode), was laboratory constructed and employed for the detection of arsenic by coupling to atomic fluorescence spectrometry. This integrated cell was free of ion-exchange membrane and individual anolyte, with the virtues of low-cost, easy assembly and environmental-friendly. Using flow injection mode, the sample throughput could come to 120 h(-1) attributed to the small dimension of the cathode chamber. The operating conditions for the electrochemical hydride generation of arsenic were investigated in detail and the potential interferences from oxygen or various ions were also evaluated. Under the optimized conditions, no obvious oxygen quenching effects were observed. The limit of detection of As (III) for the sample blank solution was 0.2 ng mL(-1) (3sigma) and the relative standard deviation was 3.1% for nine consecutive measurements of 5 ng mL(-1) As (III) standard solution. The calibration curve was linear up to 100 ng mL(-1). The accuracy of the method was verified by the determination of arsenic in the reference materials GBW08517 (Laminaria Japonica Aresch) and GBW10023 (Porphyra crispata) and the developed method was successfully applied to determine trace amounts of arsenic in edible seaweeds.

  5. Multivariate optimization of a method for antimony determination by hydride generation atomic fluorescence spectrometry in hair samples of patients undergoing chemotherapy against Leishmaniasis. (United States)

    Cardozo, Manuelle C; Cavalcante, Dannuza D; Silva, Daniel L F; Santos, Walter N L Dos; Bezerra, Marcos A


    A method was developed for determination of total antimony in hair samples from patients undergoing chemotherapy against Leishmaniasis based on the administration of pentavalent antimonial drugs. The method is based on microwave assisted digestion of the samples in a pressurized system, reduction of Sb5+ to Sb3+ with KI solution (10% w/v) in ascorbic acid (2%, w/v) and its subsequent determination by hydride generation atomic fluorescence spectrometry (HG-AFS). The proportions of each component (HCl, HNO3 and water) used in the digestion were studied applying a constrained mixtures design. The optimal proportions found were 50% water, 25% HNO3 and 25% HCl. Variables involved in the generation of antimony hydride were optimized using a Doehlert design revealing that good sensitivity is found when using 2.0% w/v NaBH4 and 4.4 mol L-1 HCl. Under the optimum experimental conditions, the method allows the determination of antimony in hair samples with detection and quantification limits of 1.4 and 4.6 ng g-1, respectively, and precision expressed as relative standard deviation (RSD) of 2.8% (n = 10 to 10.0 mg L-1). The developed method was applied in the analysis of hair samples from patients who take medication against Leishmaniasis.

  6. Multivariate optimization of a method for antimony determination by hydride generation atomic fluorescence spectrometry in hair samples of patients undergoing chemotherapy against Leishmaniasis

    Directory of Open Access Journals (Sweden)



    Full Text Available ABSTRACT A method was developed for determination of total antimony in hair samples from patients undergoing chemotherapy against Leishmaniasis based on the administration of pentavalent antimonial drugs. The method is based on microwave assisted digestion of the samples in a pressurized system, reduction of Sb5+ to Sb3+ with KI solution (10% w/v in ascorbic acid (2%, w/v and its subsequent determination by hydride generation atomic fluorescence spectrometry (HG-AFS. The proportions of each component (HCl, HNO3 and water used in the digestion were studied applying a constrained mixtures design. The optimal proportions found were 50% water, 25% HNO3 and 25% HCl. Variables involved in the generation of antimony hydride were optimized using a Doehlert design revealing that good sensitivity is found when using 2.0% w/v NaBH4 and 4.4 mol L-1 HCl. Under the optimum experimental conditions, the method allows the determination of antimony in hair samples with detection and quantification limits of 1.4 and 4.6 ng g-1, respectively, and precision expressed as relative standard deviation (RSD of 2.8% (n = 10 to 10.0 mg L-1. The developed method was applied in the analysis of hair samples from patients who take medication against Leishmaniasis.

  7. Determination of total Sb,Se Te, and Bi and evaluation of their inorganic species in garlic by hydride-generation-atomic-fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Matos Reyes, M.N.; Cervera, M.L.; Guardia, M. de la [University of Valencia, Department of Analytical Chemistry, Burjassot, Valencia (Spain)


    A sensitive and simple analytical method has been developed for determination of Sb(III), Sb(V), Se(IV), Se(VI), Te(IV), Te(VI), and Bi(III) in garlic samples by using hydride-generation-atomic-fluorescence spectrometry (HG-AFS). The method is based on a single extraction of the inorganic species by sonication at room temperature with 1 mol L{sup -1} H{sub 2}SO{sub 4} and washing of the solid phase with 0.1% (w/v) EDTA, followed by measurement of the corresponding hydrides generated under two different experimental conditions directly and after a pre-reduction step. The limit of detection of the method was 0.7 ng g{sup -1} for Sb(III), 1.0 ng g{sup -1} for Sb(V), 1.3 ng g{sup -1} for Se(IV), 1.0 ng g{sup -1} for Se(VI), 1.1 ng g{sup -1} for Te(IV), 0.5 ng g{sup -1} for Te(VI), and 0.9 ng g{sup -1} for Bi(III), in all cases expressed in terms of sample dry weight. (orig.)

  8. Validation of a methodology for the study of generation cost of electric power for nuclear power plants; Validacion de una metodologia para el estudio de costos de generacion de electricidad de plantas nucleares de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Ortega C, R.F.; Martin del Campo M, C. [Facultad de Ingenieria, UNAM, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Paseo Cuauhnahuac 8532, 62550, Jiutepec, Morelos (Mexico)]. E-mail:


    It was developed a model for the calculation of costs of electric generation of nuclear plants. The developed pattern was validated with the one used by the United States Council for Energy Awareness (USCEA) and the Electric Power Research Institute (EPRI), in studies of comparison of alternatives for electric generation of nuclear plants and fossil plants with base of gas and of coal in the United States described in the guides calls Technical Assessment Guides of EPRI. They are mentioned in qualitative form some changes in the technology of nucleo electric generation that could be included in the annual publication of Costs and Parameters of Reference for the Formulation of Projects of Investment in the Electric Sector of the Federal Commission of Electricity. These changes are in relation to the advances in the technology, in the licensing, in the construction and in the operation of the reactors called advanced as the A BWR built recently in Japan. (Author)

  9. On-line electrochemically controlled in-tube solid phase microextraction of inorganic selenium followed by hydride generation atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Asiabi, Hamid [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of); Yamini, Yadollah, E-mail: [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of); Seidi, Shahram [Department of Analytical Chemistry, Faculty of Chemistry, K.N. Toosi University of Technology, Tehran (Iran, Islamic Republic of); Shamsayei, Maryam; Safari, Meysam; Rezaei, Fatemeh [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of)


    In this work, for the first time, a rapid, simple and sensitive microextraction procedure is demonstrated for the matrix separation, preconcentration and determination of inorganic selenium species in water samples using an electrochemically controlled in-tube solid phase microextraction (EC-in-tube SPME) followed by hydride generation atomic absorption spectrometry (HG-AAS). In this approach, in which EC-in-tube SPME and HG-AAS system were combined, the total analysis time, was decreased and the accuracy, repeatability and sensitivity were increased. In addition, to increases extraction efficiency, a novel nanostructured composite coating consisting of polypyrrole (PPy) doped with ethyleneglycol dimethacrylate (EGDMA) was prepared on the inner surface of a stainless-steel tube by a facile electrodeposition method. To evaluate the offered setup and the new PPy-EGDMA coating, it was used to extract inorganic selenium species in water samples. Extraction of inorganic selenium species was carried out by applying a positive potential through the inner surface of coated in-tube under flow conditions. Under the optimized conditions, selenium was detected in amounts as small as 4.0 parts per trillion. The method showed good linearity in the range of 0.012–200 ng mL{sup −1}, with coefficients of determination better than 0.9996. The intra- and inter-assay precisions (RSD%, n = 5) were in the range of 2.0–2.5% and 2.7–3.2%, respectively. The validated method was successfully applied for the analysis of inorganic selenium species in some water samples and satisfactory results were obtained. - Graphical abstract: An electrochemically controlled in-tube solid phase microextraction followed by hydride generation atomic absorption spectrometry was developed for extraction and determination ultra-trace amounts of Se in aqueous solutions. - Highlights: • A nanostructured composite coating consisting of PPy doped with EGDMA was prepared. • The coating was

  10. Hydride generation coupled with thioglycolic acid coated gold nanoparticles as simple and sensitive headspace colorimetric assay for visual detection of Sb(III). (United States)

    Tolessa, Tesfaye; Tan, Zhi-Qiang; Liu, Jing-Fu


    Antimony (Sb) is a toxic element which causes different health problems including cardiac problems and lung cancer in humans, and its levels in surface water can be noticeably increased to 100 μg/L typically in the proximity of anthropogenic sources. Thus, besides instrumental techniques, it is of great significance to develop a simple, sensitive and selective analytical method for direct analysis of Sb(III) at trace level without the need of any expensive and/or complicated instrumentations and sample preparation processes. Herein, a simple and sensitive headspace colorimetric assay was developed for the detection of Sb(III) by hydride generation coupled with thioglycolic acid functionalized gold nanoparticles (TGA-AuNPs). Sb(III) in the 30 mL sample solution was converted into its volatile form (SbH3) through hydride generation reaction and headspace extracted into 100 μL chromogenic reagent, which contains methanol as extractant and TGA-AuNPs as nanosensors, leading to aggregation of TGA-AuNPs and therefore a red-to-blue color change. Parameters influencing the chromogenic and hydride generation reactions were optimized. Addition of 300 μM ethylenediamine tetraacetic acid (EDTA) as masking agent largely suppressed the inferences from mercury and arsenic. The proposed method can tolerate at least 10-fold As(III) and 100-fold other metal ions including Hg(II). The detection limits were 6.0 and 1.2 μg/L Sb(III) by naked-eye and UV-Vis spectrometer, respectively, which meet the maximum admissible level in drinking water (6 μg/L) set by the United States Environmental Protection Agency. The feasibility of the proposed method was demonstrated by rapid detection of Sb(III) in river water, lake water, ground water and sea water samples by naked-eye at a spiking level of 6 μg/L Sb(III). Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Determination of As(III) and As(V) by Flow Injection-Hydride Generation-Atomic Absorption Spectrometry via On-line Reduction of As(V) by KI

    DEFF Research Database (Denmark)

    Nielsen, Steffen; Hansen, Elo Harald


    A volume-based flow injection (FI) procedure is described for the determination and speciation of trace inorganic arsenic, As(III) and As(V), via hydride generation-atomic absorption spectrometry (HG-AAS) of As(III). The determination of total arsenic is obtained by on-line reduction of As(V) to As...

  12. Determination of Ultra-trace Amounts of Arsenic(III) by Flow Injection Hydride Generation Atomic Absorption Spectrometry with On-line Preconcentration by Coprecipitation with Lanthanum Hydroxide or Hafnium Hydroxide

    DEFF Research Database (Denmark)

    Nielsen, Steffen; Sloth, Jens Jørgen; Hansen, Elo Harald


    . Subsequently the precipitate is eluted with 1 mol/l hydrochloric acid, allowing ensuing determination of the analyte via hydride generation. The preconcentration of As(III) was tested by coprecipitation with two different inorganic coprecipitating agents namely La(III) and Hf(IV). It was shown that As...

  13. Speciation analysis of organoarsenical compounds in biological matrices by coupling ion chromatography to atomic fluorescence spectrometry with on-line photooxidation and hydride generation

    Energy Technology Data Exchange (ETDEWEB)

    Simon, S.; Lobos, G.; Pannier, F.; De Gregori, I.; Pinochet, H.; Potin-gautier, M


    The optimisation of an on-line decomposition based on UV photooxidation for the analysis of organoarsenic species by coupling cation-exchange chromatography and atomic fluorescence spectrometry with hydride generation, is described. In this study, special consideration is given to the compatibility of mobile phases with post-column treatments. Results show that the most commonly used mobile phase, aqueous pyridine solutions, decreases species conversion efficiency, leading to a significant loss of sensitivity. New fully-compatible chromatographic conditions are proposed to separate arsenobetaine, arsenocholine, trimethylarsine oxide and tetramethylarsonium ion within 20 min. The very low absolute limits of detection, 4-12 pg(As), allow speciation at trace levels. Analysis of a certified reference fish tissue (DORM-2) and other seafood samples (French and Chilean oysters and mussel) highlights the robustness and the accuracy of the optimised system.

  14. [Direct determination of water-soluble antimony(III) and antimony(V) in soil by hydride generation atomic fluorescence spectrometry]. (United States)

    Yu, Zhao-Shui; Zhang, Qin


    A simple, rapid and useful method for the determination of water-soluble antimony(III) and antimony(V) in soil was established using hydride generation atomic fluorescence spectrometry. The method was based on the different chemical reaction efficiency between Sb(III) and Sb(V) with KBH4 in the media of HCl. The amounts of Sb(III) and Sb(V) can be obtained through measuring antimony fluorescence intensities before and after reduction with reductant. The effects of HCl and KBH4 on the sensitivities of Sb(III) and Sb(V) were investigated, and the interferences from coexistent elements were studied. The reduction efficiencies of both reductants were compared. The detection limits of the method were 1.11 ng x g(-1) for Sb(III) and 1.57 ng x g(-1) for Sb(V). The accuracy of the method was verified by recovery experiments on spiked real soil samples.

  15. Determination of selenium in nutritional supplements and shampoos by flow injection-hydride generation-atomic fluorescence spectrometry. (United States)

    Gámiz-Gracia, L; Luque de Castro, M D


    A method for the determination of Se in pharmaceutical samples (nutritional supplements and shampoos) is proposed. The method involves two steps: (1) digestion of the samples and reduction of all forms of Se to Se(IV), which is complete in only 10 min by the use of a focused microwave digestor; and (2) continuous derivatisation (hydride formation) and spectrometry detection by atomic fluorescence. The method can be applied over a wide range of concentrations (0.3-1300 ng ml(-1) of Se) with good repeatability (RSD values lower than 4.6%). The method has been applied successfully to a reference material, and two different types of pharmaceuticals (namely, five different nutritional supplements-with Se present as sodium selenite and Se-methionine-and two shampoos, with selenium sulphide), in agreements with the certified and nominal values, respectively. Yields ranged between 86.5 and 104.8%, and good precision (RSD values lower than 4.2%) were obtained in all instances.

  16. Construction and validation of a rubric for measuring writing in university students/Construccion y validacion de una rubrica para medir la expresion escrita en estudiantes universitarios

    National Research Council Canada - National Science Library

    Rodriguez, Armel Brizuela


    .... Keywords Reliability; rubric; writing; university students En este articulo se presenta el proceso de construccion y validacion de una rubrica para medir la expresion escrita de estudiantes universitarios...

  17. Metal Hydride Compression

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Terry A. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Bowman, Robert [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Barton [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Anovitz, Lawrence [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jensen, Craig [Hawaii Hydrogen Carriers LLC, Honolulu, HI (United States)


    Conventional hydrogen compressors often contribute over half of the cost of hydrogen stations, have poor reliability, and have insufficient flow rates for a mature FCEV market. Fatigue associated with their moving parts including cracking of diaphragms and failure of seal leads to failure in conventional compressors, which is exacerbated by the repeated starts and stops expected at fueling stations. Furthermore, the conventional lubrication of these compressors with oil is generally unacceptable at fueling stations due to potential fuel contamination. Metal hydride (MH) technology offers a very good alternative to both conventional (mechanical) and newly developed (electrochemical, ionic liquid pistons) methods of hydrogen compression. Advantages of MH compression include simplicity in design and operation, absence of moving parts, compactness, safety and reliability, and the possibility to utilize waste industrial heat to power the compressor. Beyond conventional H2 supplies of pipelines or tanker trucks, another attractive scenario is the on-site generating, pressuring and delivering pure H2 at pressure (≥ 875 bar) for refueling vehicles at electrolysis, wind, or solar generating production facilities in distributed locations that are too remote or widely distributed for cost effective bulk transport. MH hydrogen compression utilizes a reversible heat-driven interaction of a hydride-forming metal alloy with hydrogen gas to form the MH phase and is a promising process for hydrogen energy applications [1,2]. To deliver hydrogen continuously, each stage of the compressor must consist of multiple MH beds with synchronized hydrogenation & dehydrogenation cycles. Multistage pressurization allows achievement of greater compression ratios using reduced temperature swings compared to single stage compressors. The objectives of this project are to investigate and demonstrate on a laboratory scale a two-stage MH hydrogen (H2) gas compressor with a

  18. Ultrasonic extraction followed by sonolysis-ozonolysis as a sample pretreatment method for determination of reactive arsenic toward sodium tetrahydroborate by flow injection-hydride generation AAS. (United States)

    Capelo, J L; Lavilla, I; Bendicho, C


    A new sample pretreatment method based on ultrasonic extraction in HCI medium and subsequent oxidation of the extracts by sonozone (i.e., sonolysis-ozonolysis) has been developed for determination of reactive arsenic toward sodium tetrahydroborate [mainly As(III) + As(V)] by flow injection-hydride generation atomic absorption spectrometry. This method avoids the use of intensive treatments with concentrated and corrosive acids, high pressures, and temperatures that are inherent with traditional wet or dry ashing procedures and entails reduced waste production and reagent consumption. A sonozone process at room temperature was optimized to break the bond of As to proteins and macromolecular constituents which was an essential requirement for effective reduction by L-cysteine prior to arsine generation. Spiking experiments showed that As(III), As(V), MMA, and DMA were fully recovered from several matrixes on applying the above treatment. On the other hand, a nonreducible As species such as arsenobetaine that is predominant in some biological samples remained unchanged. Application of the method to sediment, soil, fly ash, and plant CRMs demonstrated that, in general, a good agreement existed between certified and found As contents, thereby indicating the absence of nonreducible As forms. Low As recoveries were observed for fish CRMs, as a result of the nondegradability of arsenobetaine by sonozone. The detection limit of As in the samples investigated was in the range 0.19-2.8 microg g(-1).

  19. Ultrasound- and microwave-assisted extractions followed by hydride generation inductively coupled plasma optical emission spectrometry for lead determination in geological samples. (United States)

    Welna, Maja; Borkowska-Burnecka, Jolanta; Popko, Malgorzata


    Followed the current idea of simplified sample pretratmet before analysis we evaluated the procedure for the determination of Pb in calcium-rich materials such as dolomites after ultrasound- or microwave- assisted extraction with diluted acids using hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES). Corresponding Pb hydride was generated in the reaction of an acidified sample solution with NaBH4 after pre-oxidation of Pb(II) to Pb(IV) by K3[Fe(CN)6]. Several chemical (acidic media: HCl, HNO3 or CH3COOH, concentration of the reductant as well as type and concentration of oxidazing agents) and physical (reagents flow rates, reaction coil length) parameters affecting the efficiency of plumbane formation were optimized in order to improve the detectability of Pb using HG-ICP-OES. Limitation of the method derived from the matrix effects was pointed out. Employing Pb separation by HG technique allows the significant reduction of interferences caused by sample matrix constituents (mainly Ca and Mg), nevertheless they could not be overcame at all, hence calibration based on the standard addition method was recommended for Pb quantification in dolomites. Under the selected conditions, i.e. 0.3 mol L(-1) HCl, HNO3 or CH3COOH, 1.5% NaBH4 and 3.0% K3[Fe(CN)6] the limits of detection (LODs) between 2.3-5.6 μg L(-1) (3.4-6.8 μg L(-1) considering matrix effects) and the precision below 5% were achieved. The accuracy of the procedure was verified by analysis of certified reference materials (NCS DC70308 (Carbonate Rock) and NIST 14000 (Bone Ash)) and recovery test with satisfactory results of Pb recoveries ranging between 94-108% (CRMs analysis) and 92-114% (standard addition method). The applicability of the proposed method was demonstrated by the determination of Pb in dolomites used by different fertiliser factories. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Determination of Ultra-Trace Amounts of Selenium(IV) by Flow Injection Hydride Generation Atomic Absorption Spectrometry with On-line Preconcentration by Co-precipitation with Lanthanium Hydroxide. Part II. On-line Addition of Coprecipating Agent

    DEFF Research Database (Denmark)

    Nielsen, Steffen; Sloth, Jens Jørgen; Hansen, Elo Harald


    with hydrochloric acid, allowing an ensuing determination via hydride generation. At different sample flow rates, i.e., 4.8, 6.4 and 8.8 ml/min, enrichment factors of 30, 40 and 46, respectively, were obtained at a sampling frequency of 33 samples/h. The detection limit (3s) was 0.005 µg/l at a sample flow rate...

  1. Multielemental Determination of As, Bi, Ge, Sb, and Sn in Agricultural Samples Using Hydride Generation Coupled to Microwave-Induced Plasma Optical Emission Spectrometry. (United States)

    Machado, Raquel C; Amaral, Clarice D B; Nóbrega, Joaquim A; Araujo Nogueira, Ana Rita


    A microwave-induced plasma optical emission spectrometer with N2-based plasma was combined with a multimode sample introduction system (MSIS) for hydride generation (HG) and multielemental determination of As, Bi, Ge, Sb, and Sn in samples of forage, bovine liver, powdered milk, agricultural gypsum, rice, and mineral fertilizer, using a single condition of prereduction and reduction. The accuracy of the developed analytical method was evaluated using certified reference materials of water and mineral fertilizer, and recoveries ranged from 95 to 106%. Addition and recovery experiments were carried out, and the recoveries varied from 85 to 117% for all samples evaluated. The limits of detection for As, Bi, Ge, Sb, and Sn were 0.46, 0.09, 0.19, 0.46, and 5.2 μg/L, respectively, for liquid samples, and 0.18, 0.04, 0.08, 0.19, and 2.1 mg/kg, respectively, for solid samples. The method proposed offers a simple, fast, multielemental, and robust alternative for successful determination of all five analytes in agricultural samples with low operational cost without compromising analytical performance.

  2. Quantifying uncertainty in measurement of mercury in suspended particulate matter by cold vapor technique using atomic absorption spectrometry with hydride generator. (United States)

    Singh, Nahar; Ahuja, Tarushee; Ojha, Vijay Narain; Soni, Daya; Tripathy, S Swarupa; Leito, Ivo


    As a result of rapid industrialization several chemical forms of organic and inorganic mercury are constantly introduced to the environment and affect humans and animals directly. All forms of mercury have toxic effects; therefore accurate measurement of mercury is of prime importance especially in suspended particulate matter (SPM) collected through high volume sampler (HVS). In the quantification of mercury in SPM samples several steps are involved from sampling to final result. The quality, reliability and confidence level of the analyzed data depends upon the measurement uncertainty of the whole process. Evaluation of measurement uncertainty of results is one of the requirements of the standard ISO/IEC 17025:2005 (European Standard EN IS/ISO/IEC 17025:2005, issue1:1-28, 2006). In the presented study the uncertainty estimation in mercury determination in suspended particulate matter (SPM) has been carried out using cold vapor Atomic Absorption Spectrometer-Hydride Generator (AAS-HG) technique followed by wet chemical digestion process. For the calculation of uncertainty, we have considered many general potential sources of uncertainty. After the analysis of data of seven diverse sites of Delhi, it has been concluded that the mercury concentration varies from 1.59 ± 0.37 to 14.5 ± 2.9 ng/m(3) with 95% confidence level (k = 2).

  3. Masking Agents Evaluation for Lead Determination by Flow Injection-Hydride Generation-Atomic Fluorescence Spectrometry Technique: Effect of KI, L-Cysteine, and 1,10-Phenanthroline

    Directory of Open Access Journals (Sweden)

    Blanca G. Beltrán


    Full Text Available Hydride generation (HG of lead technique presents interferences from foreign ions of complex matrix samples. In order to minimize these interferences, the effect of masking agents such as KI, L-cysteine, and 1,10-phenanthroline was studied in the absence and in the presence of selected interfering species (As, Cr, Cu, and Fe. Different modes of addition of masking agents were accomplished, that is, to either sample or KBH4 reducing solution. The lead determinations were performed using a flow injection analysis (FIA system coupled to HG and atomic fluorescence spectrometry (AFS. The linearity of calibration curves (1–10 μg Pb L−1 was not affected by the addition of the masking agents. The use of KI in the reducing solution diminished interferences from concentrations of As and Cu, while 1,10-phenanthroline showed a positive effect on the interference by As. Moreover, Cr and Cu appeared to be the most serious interfering ions for plumbane (PbH4, because they drastically reduced the analytical signal of lead. Fe did not present any interference under the employed experimental conditions, even at high levels. The accuracy was established through the analysis of certified reference material (i.e., BCR-610, groundwater using KI as masking agent. The detection limit reached by FIA-HG-AFS proposed methodology was 0.03 μg Pb L−1.

  4. A practical method for the determination of total selenium in environmental samples using isotope dilution-hydride generation-inductively coupled plasma-mass spectrometry (United States)

    Kleckner, Amy E.; Kakouros, Evangelos; Stewart, A. Robin


    A safe, practical, and accurate method for the determination of selenium (Se) in range of environmental samples was developed. Small sample masses, 5–20 mg, were amended with 82Se enriched isotope for the isotope dilution (ID), preceding a multi-step wet digestion with nitric acid (HNO3) and hydrogen peroxide (H2O2). Samples were incubated in an autoclave for 3 h at 20 psi and 126°C. Digestates were subsequently reduced with concentrated hydrochloric acid to Se(IV) the most favorable valence for hydride generation (HG). The solutions were then analyzed on an ICP-MS equipped with Flow Injection system (FIAS-400). Polyatomic, isobaric, and background interferences were removed through the use of HG and ID with an 82Se enriched isotope spike. Recoveries for certified reference materials were determined and averaged 96% for biological tissues (NRCC DOLT3, DOLT4, DORM2, TORT2, and TORT3, and NIST 2976) and 108% for estuarine sediment (NRCC PACS2) with an average coefficient of variation for replicate measurements of ∼ 3.5%. Limit of detection was 0.13 ng Se g−1 dry weight or 0.19 ng Se L−1. This method can be broadly applied to biological tissues, sediments, suspended particulates, and water samples with minimal modifications making this method highly useful for assessing the ecotoxicology of total Se in aquatic ecosystems.

  5. Determination and Uncertainty Analysis of Inorganic Arsenic in Husked Rice by Solid Phase Extraction and Atomic Absorption Spectrometry with Hydride Generation. (United States)

    Saxena, Sushil Kumar; Karipalli, Agnes Raju; Krishnan, Anoop A; Rangasamy, Rajesh; Malekadi, Praveen; Singh, Dhirendra P; Vasu, Vimesh; Singh, Vijay K


    This study enables the selective determination of inorganic arsenic (iAs) with a low detection limit using an economical instrument [atomic absorption spectrometer with hydride generation (HG)] to meet the regulatory requirements as per European Commission (EC) and Codex guidelines. Dry rice samples (0.5 g) were diluted using 0.1 M HNO3-3% H2O2 and heated in a water bath (90 ± 2°C) for 60 min. Through this process, all the iAs is solubilized and oxidized to arsenate [As(V)]. The centrifuged extract was loaded onto a preconditioned and equilibrated strong anion-exchange SPE column (silica-based Strata SAX 500 mg/6 mL), followed by selective and sequential elution of As(V), enabling the selective quantification of iAs using atomic absorption spectrometry with HG. In-house validation showed a mean recovery of 94% and an LOQ of 0.025 mg/kg. The repeatability (HorRatr) and reproducibility (HorRatR) values were determination of iAs in husked rice samples and has potential applications in other food commodities.

  6. Slurry sampling-microwave assisted leaching prior to hydride generation-pervaporation-atomic fluorescence detection for the determination of extractable arsenic in soil. (United States)

    Caballo-López, A; Luque De Castro, M D


    A flow injection-pervaporation method, where the sample was introduced as slurry, has been developed for the continuous derivatization and determination of arsenic in soil by hydride generation-atomic fluorescence spectrometry. The removal of arsenic is achieved with the help of a microwave digestor, which facilitates an on-line leaching in the flow injection manifold. Slurries, prepared by mixing the soil (particle size <65 microm) with 6 mol L(-)(1) HCl, were magnetically stirred for 3 min, and while stirring, the pump aspirated the aliquot and filled the loop (500 microL) of the injection valve. An industrial soil and five types of soil (sandy, clayey, slimy, limy, organic) were selected for the optimization of the leaching and determination steps of arsenic, respectively. The results obtained from three certified reference materials [stream sediment GBW 07311 (188 microg/mL As), river sediment CRM 320 (76.7 microg/mL As), and soil GBW 07405 (412 microg/mL As)] using direct calibration against aqueous standards demonstrate the reliability of the method. The relative standard deviation for within-laboratory reproducibility was 4.5%.

  7. Determination of As(III) and As(V) in soils using sequential extraction combined with flow injection hydride generation atomic fluorescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Shi Jianbo; Tang Zhiyong; Jin Zexiang; Chi Quan; He Bin; Jiang Guibin


    An analytical procedure for determination of As(III) and As(V) in soils using sequential extraction combined with flow injection (FI) hydride generation atomic fluorescence spectrometry (HG-AFS) was presented. The soils were sequentially extracted by water, 0.6 mol l{sup -1} KH{sub 2}PO{sub 4} solution, 1% (v/v) HCl solution and 1% (w/v) NaOH solution. The arsenite (As(III)) in extract was analyzed by HG-AFS in the medium of 0.1 mol l{sup -1} citric acid solution, then the total arsenic in extract was determined by HG-AFS using on-line reduction of arsenate with L-cysteine. The concentration of arsenate (As(V)) was calculated by the difference. The optimum conditions of extraction and determination were studied in detail. The detection limit (3{sigma}) for As(III) and As(V) were 0.11 and 0.07 {mu}g l{sup -1}, respectively. The relative standard deviation (R.S.D.) was 1.43% (n=11) at the 10 {mu}g l{sup -1} As level. The method was applied in the determination of As(III) and As(V) of real soils and the recoveries of As(III) and As(V) were in the range of 89.3-118 and 80.4-111%, respectively.

  8. Hydride generation coupled to microfunnel-assisted headspace liquid-phase microextraction for the determination of arsenic with UV-Vis spectrophotometry. (United States)

    Hashemniaye-Torshizi, Reihaneh; Ashraf, Narges; Arbab-Zavar, Mohammad Hossein


    In this research, a microfunnel-assisted headspace liquid-phase microextraction technique has been used in combination with hydride generation to determine arsenic (As) by UV-Vis spectrophotometry. The method is based on the reduction of As to arsine (AsH3) in acidic media by sodium tetrahydroborate (NaBH4) followed by its subsequent reaction with silver diethyldithiocarbamate (AgDDC) to give an absorbing complex at 510 nm. The complexing reagent (AgDDC) has been dissolved in a 1:1 (by the volume ratio) mixture of chloroform/chlorobenzene microdroplet and exposed to the generated gaseous arsine via a reversed microfunnel in the headspace of the sample solution. Several operating parameters affecting the performance of the method have been examined and optimized. Acetonitrile solvent has been added to the working samples as a sensitivity enhancement agent. Under the optimized operating conditions, the detection limit has been measured to be 0.2 ng mL(-1) (based on 3sb/m criterion, n b = 8), and the calibration curve was linear in the range of 0.5-12 ng mL(-1). The relative standard deviation for eight replicate measurements was 1.9 %. Also, the effects of several potential interferences have been studied. The accuracy of the method was validated through the analysis of JR-1 geological standard reference material. The method has been successfully applied for the determination of arsenic in raw and spiked soft drink and water samples with the recoveries that ranged from 91 to 106 %.

  9. Flow analysis-hydride generation-gas phase derivative molecular absorption spectrophotometric determination of antimony in oral homeopathic products ("AntimoniumTartaricum") formulated under alcoholic medium. (United States)

    Gallignani, Máximo; Ovalles, Fernando; Brunetto, Maria Del Rosario; Burguera, Marcela; Burguera, Jose Luis


    In this work, a flow analysis-hydride generation-gas phase derivative molecular absorption-(UV) spectrophotometric method has been developed for the direct determination of antimony in aqueous and hydro-alcoholic samples. Antimony (III) from undiluted samples is directly transformed into the gaseous stibine (SbH(3)) form by on-line reaction with sodium tetrahydroborate (NaBH(4)) in acidic medium (HCl). The gaseous phase generated is separated from the liquid phase using a commercial gas-liquid separator, and swept - with the help of a carrier gas (N(2)) stream - into a quartz gas cell (10cm pathlength); where the corresponding absorption spectrum is acquired in a continuous mode over the 190-300nm wavelength range, using a conventional spectrophotometer. A derivative strategy was selected in order to avoid the strong spectral interference of the ethanol vapor on the gaseous SbH(3) absorption spectrum. In this way, the peak height at 223nm of the second order derivative spectrum appears as a clear, clean and interference free analytical signal, which allows the direct determination of antimony. The recovery values obtained from homeopathic formulations (prepared in alcoholic medium) spiked with know amounts of antimony ranged between 97.5 and 103%. The method provides a dynamic range from 0.20 to 30mgSbl(-1). The precision (RDS), evaluated by replicate analysis (n=5) of samples and standard solution containing between 2.5 and 15mgSbl(-1) was in all cases lower than 1.2%. The proposed method was applied to the determination of antimony in commercial homeopathic products ("Antimonium Tartaricum") prepared in hydro-alcoholic medium; and showed to be simple, precise, and accurate.

  10. On-line determination of antimony(III) and antimony(V) in liver tissue and whole blood by flow injection - hydride generation - atomic absorption spectrometry. (United States)

    Petit de Peña, Y; Vielma, O; Burguera, J L; Burguera, M; Rondón, C; Carrero, P


    A new analytical procedure for the speciation of antimony in liver tissues is presented here. For this purpose, a flow injection system has been developed for the treatment of samples and the determination of antimony by hydride generation - atomic absorption spectrometry. The method involves the sequential and the on-line extraction of antimony(III) and antimony(V) from solid lyophilized blood and hamsters liver tissues, with 1.5 mol l(-1) acetic acid and 0.5 mol l(-1) sulfuric acid for Sb(III) and Sb(V), respectively. Reduction of Sb(V) to Sb(III) for stibine generation is effected by the on-line pre-reduction with l-cysteine. The linear ranges were 2.5-20 and 1.0-25 mug l(-1) of Sb(III) and Sb(V), respectively. The detection limits (3sigma) were 1.0 mug l(-1) for Sb(III) and 0.5 mug l(-1) for Sb(V). The relative standard deviation values for fifteen independent measurements were 2.1 and 1.8% for Sb(III) and Sb(V), respectively. The recovery studies performed with samples of cattle liver provided results from 98 to 100% for Sb(III) and from 100 to 103% for Sb(V) for samples spiked with single species. For samples spiked with both Sb(III) and Sb(V), the recovery varied from 97 to 103% for Sb(III) and from 101 to 103% for Sb(V).

  11. Hydrogen storage in the form of metal hydrides (United States)

    Zwanziger, M. G.; Santana, C. C.; Santos, S. C.


    Reversible reactions between hydrogen and such materials as iron/titanium and magnesium/ nickel alloy may provide a means for storing hydrogen fuel. A demonstration model of an iron/titanium hydride storage bed is described. Hydrogen from the hydride storage bed powers a converted gasoline electric generator.

  12. Regenerative Hydride Heat Pump (United States)

    Jones, Jack A.


    Hydride heat pump features regenerative heating and single circulation loop. Counterflow heat exchangers accommodate different temperatures of FeTi and LaNi4.7Al0.3 subloops. Heating scheme increases efficiency.

  13. Hydride heat pump (United States)

    Cottingham, James G.


    Method and apparatus for the use of hydrides to exhaust heat from one temperature source and deliver the thermal energy extracted for use at a higher temperature, thereby acting as a heat pump. For this purpose there are employed a pair of hydridable metal compounds having different characteristics working together in a closed pressure system employing a high temperature source to upgrade the heat supplied from a low temperature source.

  14. Determination of inorganic arsenic in algae using bromine halogenation and on-line nonpolar solid phase extraction followed by hydride generation atomic fluorescence spectrometry. (United States)

    Zhang, Weihong; Qi, Yuehan; Qin, Deyuan; Liu, Jixin; Mao, Xuefei; Chen, Guoying; Wei, Chao; Qian, Yongzhong


    Accurate, stable and fast analysis of toxic inorganic arsenic (iAs) in complicated and arsenosugar-rich algae matrix is always a challenge. Herein, a novel analytical method for iAs in algae was reported, using bromine halogenation and on-line nonpolar solid phase extraction (SPE) followed by hydride generation atomic fluorescence spectrometry (HG-AFS). The separation of iAs from algae was first performed by nonpolar SPE sorbent using Br - for arsenic halogenation. Algae samples were extracted with 1% perchloric acid. Then, 1.5mL extract was reduced by 1% thiourea, and simultaneously reacted (for 30min) with 50μL of 10% KBr for converting iAs to AsBr 3 after adding 3.5mL of 70% HCl to 5mL. A polystyrene (PS) resin cartridge was employed to retain arsenicals, which were hydrolyzed, eluted from the PS resin with H 2 O, and categorized as iAs. The total iAs was quantified by HG-AFS. Under optimum conditions, the spiked recoveries of iAs in real algae samples were in the 82-96% range, and the method achieved a desirable limit of detection of 3μgkg -1 . The inter-day relative standard deviations were 4.5% and 4.1% for spiked 100 and 500μgkg -1 respectively, which proved acceptable for this method. For real algae samples analysis, the highest presence of iAs was found in sargassum fusiforme, followed by kelp, seaweed and laver. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Arsenic fractionation in agricultural soil using an automated three-step sequential extraction method coupled to hydride generation-atomic fluorescence spectrometry. (United States)

    Rosas-Castor, J M; Portugal, L; Ferrer, L; Guzmán-Mar, J L; Hernández-Ramírez, A; Cerdà, V; Hinojosa-Reyes, L


    A fully automated modified three-step BCR flow-through sequential extraction method was developed for the fractionation of the arsenic (As) content from agricultural soil based on a multi-syringe flow injection analysis (MSFIA) system coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS). Critical parameters that affect the performance of the automated system were optimized by exploiting a multivariate approach using a Doehlert design. The validation of the flow-based modified-BCR method was carried out by comparison with the conventional BCR method. Thus, the total As content was determined in the following three fractions: fraction 1 (F1), the acid-soluble or interchangeable fraction; fraction 2 (F2), the reducible fraction; and fraction 3 (F3), the oxidizable fraction. The limits of detection (LOD) were 4.0, 3.4, and 23.6 μg L(-1) for F1, F2, and F3, respectively. A wide working concentration range was obtained for the analysis of each fraction, i.e., 0.013-0.800, 0.011-0.900 and 0.079-1.400 mg L(-1) for F1, F2, and F3, respectively. The precision of the automated MSFIA-HG-AFS system, expressed as the relative standard deviation (RSD), was evaluated for a 200 μg L(-1) As standard solution, and RSD values between 5 and 8% were achieved for the three BCR fractions. The new modified three-step BCR flow-based sequential extraction method was satisfactorily applied for arsenic fractionation in real agricultural soil samples from an arsenic-contaminated mining zone to evaluate its extractability. The frequency of analysis of the proposed method was eight times higher than that of the conventional BCR method (6 vs 48 h), and the kinetics of lixiviation were established for each fraction. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Arsenic speciation based on ion exchange high-performance liquid chromatography hyphenated with hydride generation atomic fluorescence and on-line UV photo oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Bin He; Jiang Gui-bin; Xu Xiao-bai [Chinese Academy of Scinces, Beijing (China). Research Center for Eco-Environmental Sciences


    An on-line method capable of the separation of arsenic species was developed for the speciation of arsenite As(III), arsenate As(V), monomethylarsenic (MMA) and dimethylarsenic acid (DMA) in biological samples. The method is based on the combination of high-performance liquid chromatograph (HPLC) for separation, UV photo oxidation for sample digestion and hydride generation atomic fluorescence spectrometry (HGAFS) for sensitive detection. The best separation results were obtained with an anion-exchange AS11 column protected by an AG11 guard column, and gradient elution with NaH{sub 2}PO{sub 4} and water as mobile phase. The on-line UV photo oxidation with 1.5% K{sub 2}S{sub 2}O{sub 8} in 0.2 mol L{sup -1} NaOH in an 8 m PTFE coil for 40 s ensures the digestion of organoarsenic compounds. Detection limits for the four species were in the range of 0.11-0.15 ng (20 {mu}L injected). Procedures were validated by analysis of the certified reference materials GBW09103 freeze-dried human urine and the results were in good agreement with the certified values of total arsenic concentration. The method has been successfully applied to speciation studies of blood arsenic species with no need of sample pretreatment. Speciation of arsenic in blood samples collected from two patients after the ingestion of realgar-containing drug reveals slight increase of arsenite and DMA, resulting from the digestion of realgar. (orig.)

  17. Determination of {sup 210}Pb via {sup 210}Bi using a hydride generation technique combined with {beta}-spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Gogrewe, D. [Fachbereich 14 - Kernchemie, Univ. Marburg (Germany); Puetz, M. [Fachbereich 14 - Kernchemie, Univ. Marburg (Germany); Weber, R. [Fachbereich 14 - Kernchemie, Univ. Marburg (Germany); Siemon, K. [Fachbereich 14 - Kernchemie, Univ. Marburg (Germany); Esterlund, R.A. [Fachbereich 14 - Kernchemie, Univ. Marburg (Germany); Patzelt, P. [Fachbereich 14 - Kernchemie, Univ. Marburg (Germany)


    A procedure for the determination of {sup 210}Pb is presented, which is based upon the {beta}-spectrometric assay (utilizing a liquid-scintillation counter) of {sup 210}Bi in radioactive equilibrium. Separation of {sup 210}Bi from the sample matrix as well as from other {beta}-emitters is achieved quickly, simply and selectively using a purge and trap technique based upon the generation and subsequent absorption of BiH{sub 3} on a prepared filter paper. Advantages of this method include: 1. radioactive equilibrium between {sup 210}Pb and {sup 210}Bi is relatively quickly attained; 2. the external background signal in liquid-scintillation counting is very low; 3. no quenching corrections are necessary, as the sample matrix is invariant; and 4. because of the high counting efficiency, only short measuring times are required. (orig.)

  18. Determination of inorganic arsenic in algae using bromine halogenation and on-line nonpolar solid phase extraction followed by hydride generation atomic flourescence spectrometry (United States)

    Accurate, stable and fast analysis of toxic inorganic arsenic (iAs) in complicated and arsenosugar-rich algae matrix is always a challenge. Herein, a novel analytical method for iAs in algae was reported, using bromine halogenation and on-line nonpolar solid phase extraction (SPE) followed by hydrid...

  19. [Indirect determination of rare earth elements in Chinese herbal medicines by hydride generation-atomic fluorescence spectrometry]. (United States)

    Zeng, Chao; Lu, Jian-Ping; Xue, Min-Hua; Tan, Fang-Wei; Wu, Xiao-Yan


    Based on their similarity in chemical properties, rare earth elements were able to form stable coordinated compounds with arsenazo III which were extractable into butanol in the presence of diphenylguanidine. The butanol was removed under reduced pressure distillation; the residue was dissolved with diluted hydrochloric acid. As was released with the assistance of KMnO4 and determined by hydrogen generation-atomic fluorescence spectrometry in terms of rare earth elements. When cesium sulfate worked as standard solution, extraction conditions, KMnO4 amount, distillation temperature, arsenazo III amount, interfering ions, etc were optimized. The accuracy and precision of the method were validated using national standard certified materials, showing a good agreement. Under optimum condition, the linear relationship located in 0.2-25 microg x mL(-1) and detection limit was 0.44 microg x mL(-1). After the herbal samples were digested with nitric acid and hydrogen peroxide, the rare earth elements were determined by this method, showing satisfactory results with relative standard deviation of 1.3%-2.5%, and recoveries of 94.4%-106.0%. The method showed the merits of convenience and rapidness, simple instrumentation and high accuracy. With the rare earths enriched into organic phase, the separation of analytes from matrix was accomplished, which eliminated the interference. With the residue dissolved by diluted hydrochloric acid after the solvent was removed, aqueous sample introduction eliminated the impact of organic phase on the tubing connected to pneumatic pump.

  20. Lightweight hydride storage materials

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, G.J.; Guthrie, S.E.; Bauer, W. [Sandia National Labs., Livermore, CA (United States)


    The need for lightweight hydrides in vehicular applications has prompted considerable research into the use of magnesium and its alloys. Although this earlier work has provided some improved performance in operating temperature and pressure, substantial improvements are needed before these materials will significantly enhance the performance of an engineered system on a vehicle. We are extending the work of previous investigators on Mg alloys to reduce the operating temperature and hydride heat of formation in light weight materials. Two important results will be discussed in this paper: (1) a promising new alloy hydride was found which has better pressure-temperature characteristics than any previous Mg alloy and, (2) a new fabrication process for existing Mg alloys was developed and demonstrated. The new alloy hydride is composed of magnesium, aluminum and nickel. It has an equilibrium hydrogen overpressure of 1.3 atm. at 200{degrees}C and a storage capacity between 3 and 4 wt.% hydrogen. A hydrogen release rate of approximately 5 x 10{sup -4} moles-H{sub 2}/gm-min was measured at 200{degrees}C. The hydride heat of formation was found to be 13.5 - 14 kcal/mole-H{sub 2}, somewhat lower than Mg{sub 2}Ni. The new fabrication method takes advantage of the high vapor transport of magnesium. It was found that Mg{sub 2}Ni produced by our low temperature process was better than conventional materials because it was single phase (no Mg phase) and could be fabricated with very small particle sizes. Hydride measurements on this material showed faster kinetic response than conventional material. The technique could potentially be applied to in-situ hydride bed fabrication with improved packing density, release kinetics, thermal properties and mechanical stability.

  1. Determination of As(III) and total inorganic As in water samples using an on-line solid phase extraction and flow injection hydride generation atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Sigrist, Mirna, E-mail: [Laboratorio Central, Facultad de Ingenieria Quimica, Universidad Nacional del Litoral, Santiago del Estero 2654-Piso 6, (3000) Santa Fe (Argentina); Albertengo, Antonela; Beldomenico, Horacio [Laboratorio Central, Facultad de Ingenieria Quimica, Universidad Nacional del Litoral, Santiago del Estero 2654-Piso 6, (3000) Santa Fe (Argentina); Tudino, Mabel [Laboratorio de Analisis de Trazas, Departamento de Quimica Inorganica, Analitica y Quimica Fisica/INQUIMAE, Facultad de Ciencias Exactas y Naturales, Pabellon II, Ciudad Universitaria (1428), Buenos Aires (Argentina)


    A simple and robust on-line sequential injection system based on solid phase extraction (SPE) coupled to a flow injection hydride generation atomic absorption spectrometer (FI-HGAAS) with a heated quartz tube atomizer (QTA) was developed and optimized for the determination of As(III) in groundwater without any kind of sample pretreatment. The method was based on the selective retention of inorganic As(V) that was carried out by passing the filtered original sample through a cartridge containing a chloride-form strong anion exchanger. Thus the most toxic form, inorganic As(III), was determined fast and directly by AsH{sub 3} generation using 3.5 mol L{sup -1} HCl as carrier solution and 0.35% (m/v) NaBH{sub 4} in 0.025% NaOH as the reductant. Since the uptake of As(V) should be interfered by several anions of natural occurrence in waters, the effect of Cl{sup -}, SO{sub 4}{sup 2-}, NO{sub 3}{sup -}, HPO{sub 4}{sup 2-}, HCO{sub 3}{sup -} on retention was evaluated and discussed. The total soluble inorganic arsenic concentration was determined on aliquots of filtered samples acidified with concentrated HCl and pre-reduced with 5% KI-5% C{sub 6}H{sub 8}O{sub 6} solution. The concentration of As(V) was calculated by difference between the total soluble inorganic arsenic and As(III) concentrations. Detection limits (LODs) of 0.5 {mu}g L{sup -1} and 0.6 {mu}g L{sup -1} for As(III) and inorganic total As, respectively, were obtained for a 500 {mu}L sample volume. The obtained limits of detection allowed testing the water quality according to the national and international regulations. The analytical recovery for water samples spiked with As(III) ranged between 98% and 106%. The sampling throughput for As(III) determination was 60 samples h{sup -1}. The device for groundwater sampling was especially designed for the authors. Metallic components were avoided and the contact between the sample and the atmospheric oxygen was carried to a minimum. On-field arsenic species

  2. Metal interferences and their removal prior to the determination of As(T) and As(III) in acid mine waters by hydride generation atomic absorption spectrometry (United States)

    McCleskey, R. Blaine; Nordstrom, D. Kirk; Ball, James W.


    Hydride generation atomic absorption spectrometry (HGAAS) is a sensitive and selective method for the determination of total arsenic (arsenic(III) plus arsenic(V)) and arsenic(III); however, it is subject to metal interferences for acid mine waters. Sodium borohydride is used to produce arsine gas, but high metal concentrations can suppress arsine production. This report investigates interferences of sixteen metal species including aluminum, antimony(III), antimony(V), cadmium, chromium(III), chromium(IV), cobalt, copper(II), iron(III), iron(II), lead, manganese, nickel, selenium(IV), selenium(VI), and zinc ranging in concentration from 0 to 1,000 milligrams per liter and offers a method for removing interfering metal cations with cation exchange resin. The degree of interference for each metal without cation-exchange on the determination of total arsenic and arsenic(III) was evaluated by spiking synthetic samples containing arsenic(III) and arsenic(V) with the potential interfering metal. Total arsenic recoveries ranged from 92 to 102 percent for all metals tested except antimony(III) and antimony(V) which suppressed arsine formation when the antimony(III)/total arsenic molar ratio exceeded 4 or the antimony(V)/total arsenic molar ratio exceeded 2. Arsenic(III) recoveries for samples spiked with aluminum, chromium(III), cobalt, iron(II), lead, manganese, nickel, selenium(VI), and zinc ranged from 84 to 107 percent over the entire concentration range tested. Low arsenic(III) recoveries occurred when the molar ratios of metals to arsenic(III) were copper greater than 120, iron(III) greater than 70, chromium(VI) greater than 2, cadmium greater than 800, antimony(III) greater than 3, antimony(V) greater than 12, or selenium(IV) greater than 1. Low recoveries result when interfering metals compete for available sodium borohydride, causing incomplete arsine production, or when the interfering metal oxidizes arsenic(III). Separation of interfering metal cations using

  3. Determination of sub-ng g-1levels of total inorganic arsenic and selenium in foods by hydride-generation atomic absorption spectrometry after pre-concentration. (United States)

    Altunay, Nail; Gürkan, Ramazan


    A new and simple ultrasonic-assisted extraction (UAE) procedure was developed for the determination of inorganic arsenic and selenium in foods by hydride-generation atomic absorption spectrometry (HG-AAS). The various analytical variables affecting complex formation and extraction efficiency were investigated and optimised. The method is based on selective complex formation of As(III) and Se(IV) in the presence of excess As(V) and Se(VI) with toluidine red in the presence of tartaric acid at pH 4.5, and then extraction of the resulting condensation products into the micellar phase of non-ionic surfactant, polyethylene glycol dodecyl ether, Brij 35. Under optimised conditions, good linear relationships were obtained in the ranges of 4-225 and 12-400 ng l - 1 with limits of detection of 1.1 and 3.5 ng l - 1 for As(III) and Se(IV), respectively. The repeatability was better than 3.9% for both analytes (n = 10, 25 ng l - 1 ) while reproducibility ranged from 4.2% to 4.8%. The recoveries of As(III) and Se(IV) spiked at 25-100 ng l - 1 were in the range of 94.2-104.8%. After pre-concentration of a 5.0 ml sample, the sensitivity enhancement factors for As(III) and Se(IV) were 185 and 140, respectively. Accuracy was assessed by analysis of two standard reference materials (SRMs) and spiked recovery experiments. The method was successfully applied to the accurate and reliable determination of total As and total Se by HG-AAS after pre-reduction with a mixture of L-cysteine and tartaric acid. Finally, the method was shown to be rapid and sensitive, with good results for extraction, pre-concentration and determination of total As and Se contents (as As(III) and Se(IV)) from food samples.

  4. Arsenic fractionation in agricultural soil using an automated three-step sequential extraction method coupled to hydride generation-atomic fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Rosas-Castor, J.M. [Universidad Autónoma de Nuevo León, UANL, Facultad de Ciencias Químicas, Cd. Universitaria, San Nicolás de los Garza, Nuevo León, C.P. 66451 Nuevo León (Mexico); Group of Analytical Chemistry, Automation and Environment, University of Balearic Islands, Cra. Valldemossa km 7.5, 07122 Palma de Mallorca (Spain); Portugal, L.; Ferrer, L. [Group of Analytical Chemistry, Automation and Environment, University of Balearic Islands, Cra. Valldemossa km 7.5, 07122 Palma de Mallorca (Spain); Guzmán-Mar, J.L.; Hernández-Ramírez, A. [Universidad Autónoma de Nuevo León, UANL, Facultad de Ciencias Químicas, Cd. Universitaria, San Nicolás de los Garza, Nuevo León, C.P. 66451 Nuevo León (Mexico); Cerdà, V. [Group of Analytical Chemistry, Automation and Environment, University of Balearic Islands, Cra. Valldemossa km 7.5, 07122 Palma de Mallorca (Spain); Hinojosa-Reyes, L., E-mail: [Universidad Autónoma de Nuevo León, UANL, Facultad de Ciencias Químicas, Cd. Universitaria, San Nicolás de los Garza, Nuevo León, C.P. 66451 Nuevo León (Mexico)


    Highlights: • A fully automated flow-based modified-BCR extraction method was developed to evaluate the extractable As of soil. • The MSFIA–HG-AFS system included an UV photo-oxidation step for organic species degradation. • The accuracy and precision of the proposed method were found satisfactory. • The time analysis can be reduced up to eight times by using the proposed flow-based BCR method. • The labile As (F1 + F2) was <50% of total As in soil samples from As-contaminated-mining zones. - Abstract: A fully automated modified three-step BCR flow-through sequential extraction method was developed for the fractionation of the arsenic (As) content from agricultural soil based on a multi-syringe flow injection analysis (MSFIA) system coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS). Critical parameters that affect the performance of the automated system were optimized by exploiting a multivariate approach using a Doehlert design. The validation of the flow-based modified-BCR method was carried out by comparison with the conventional BCR method. Thus, the total As content was determined in the following three fractions: fraction 1 (F1), the acid-soluble or interchangeable fraction; fraction 2 (F2), the reducible fraction; and fraction 3 (F3), the oxidizable fraction. The limits of detection (LOD) were 4.0, 3.4, and 23.6 μg L{sup −1} for F1, F2, and F3, respectively. A wide working concentration range was obtained for the analysis of each fraction, i.e., 0.013–0.800, 0.011–0.900 and 0.079–1.400 mg L{sup −1} for F1, F2, and F3, respectively. The precision of the automated MSFIA–HG-AFS system, expressed as the relative standard deviation (RSD), was evaluated for a 200 μg L{sup −1} As standard solution, and RSD values between 5 and 8% were achieved for the three BCR fractions. The new modified three-step BCR flow-based sequential extraction method was satisfactorily applied for arsenic fractionation in real agricultural

  5. Optimized procedure for the determination of antimony in lipid-rich environmental matrices by flow injection hydride generation atomic absorption spectrometry. (United States)

    Krachler, M; Burow, M; Emons, H


    An analytical procedure for the reliable determination of Sb in digests of lipid-rich environmental matrices in the low ng l-1-range based on flow injection hydride generation atomic absorption spectrometry (FI-HG-AAS) has been developed. Prior to HG-AAS, aliquots (250 to 320 mg) of dry samples were mineralized with 3 ml nitric acid and 0.5 ml of each sulfuric and perchloric acids in open digestion vessels made of glassy carbon in a heating block. Procedure detection and quantification limits of a previously developed procedure for the determination of Sb in plant materials by FI-HG-AAS were decreased with respect to the lower Sb concentrations in animal tissues, the sensitivity of the instrumental response was increased, and the composition of the acid digestion mixture was re-optimized for lipid-rich samples. The accuracy and precision of the developed procedure was evaluated by the analysis of the two reference materials Bovine Liver 1577a and Pig Kidney CRM 186. These reference materials have been additionally spiked with appropriate amounts of Sb to obtain recovery data. The solution detection limit (3 sigma) in digested samples was 0.021 microgram l-1, the detection limit for the whole procedure based on the dry powders was 7 pg g-1, the method quantification limit for a reliable determination of Sb was 23 pg g-1. The reproducibility of repetitive measurements was 6.0% at 0.1 microgram Sb l-1 and 2.2% at 0.5 microgram Sb l-1. Calibration curves were linear from 0.05 to 3 micrograms Sb l-1. To demonstrate the suitability of the developed method, concentrations of Sb have been determined in pigeon eggs (approximately 2 ng Sb g-1), as well as in bream livers (approximately 4 ng g-1) and in deer livers (approximately 5 to 8 ng g-1) from animals living in remote and urban-industrialized areas of Germany, respectively.

  6. Uranium Hydride Nucleation and Growth Model FY'16 ESC Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Richards, Andrew Walter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Holby, Edward F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Schulze, Roland K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    Uranium hydride corrosion is of great interest to the nuclear industry. Uranium reacts with water and/or hydrogen to form uranium hydride which adversely affects material performance. Hydride nucleation is influenced by thermal history, mechanical defects, oxide thickness, and chemical defects. Information has been gathered from past hydride experiments to formulate a uranium hydride model to be used in a Canned Subassembly (CSA) lifetime prediction model. This multi-scale computer modeling effort started in FY’13, and the fourth generation model is now complete. Additional high-resolution experiments will be run to further test the model.

  7. Hydrogen, lithium, and lithium hydride production (United States)

    Brown, Sam W.; Spencer, Larry S.; Phillips, Michael R.; Powell, G. Louis; Campbell, Peggy J.


    A method is provided for extracting hydrogen from lithium hydride. The method includes (a) heating lithium hydride to form liquid-phase lithium hydride; (b) extracting hydrogen from the liquid-phase lithium hydride, leaving residual liquid-phase lithium metal; (c) hydriding the residual liquid-phase lithium metal to form refined lithium hydride; and repeating steps (a) and (b) on the refined lithium hydride.

  8. ORNL Interim Progress Report on Hydride Reorientation CIRFT Tests

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yan, Yong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wang, Hong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)


    A systematic study of H. B. Robinson (HBR) high burnup spent nuclear fuel (SNF) vibration integrity was performed in Phase I project under simulated transportation environments, using the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) hot cell testing technology developed at Oak Ridge National Laboratory in 2013–14. The data analysis on the as-irradiated HBR SNF rods demonstrated that the load amplitude is the dominant factor that controls the fatigue life of bending rods. However, previous studies have shown that the hydrogen content and hydride morphology has an important effect on zirconium alloy mechanical properties. To address the effect of radial hydrides in SNF rods, in Phase II a test procedure was developed to simulate the effects of elevated temperatures, pressures, and stresses during transfer-drying operations. Pressurized and sealed fuel segments were heated to the target temperature for a preset hold time and slow-cooled at a controlled rate. The procedure was applied to both non-irradiated/prehydrided and high-burnup Zircaloy-4 fueled cladding segments using the Nuclear Regulatory Commission-recommended 400°C maximum temperature limit at various cooling rates. Before testing high-burnup cladding, four out-of-cell tests were conducted to optimize the hydride reorientation (R) test condition with pre-hydride Zircaloy-4 cladding, which has the same geometry as the high burnup fuel samples. Test HR-HBR#1 was conducted at the maximum hoop stress of 145 MPa, at a 400°C maximum temperature and a 5°C/h cooling rate. On the other hand, thermal cycling was performed for tests HR-HBR#2, HR-HBR#3, and HR-HBR#4 to generate more radial hydrides. It is clear that thermal cycling increases the ratio of the radial hydride to circumferential hydrides. The internal pressure also has a significant effect on the radial hydride morphology. This report describes a procedure and experimental results of the four out-of-cell hydride reorientation tests of

  9. Bonding of xenon hydrides

    NARCIS (Netherlands)

    Perez-Peralta, N.; Juarez, R.; Cerpa, E.; Bickelhaupt, F.M.; Merino, G.


    We have computed the structure and stability of the xenon hydrides HXeY (with Y = F, Cl, Br, I, CCH, CN, NC) using relativistic density functional theory (DFT) at ZORA-BP86/TZ2P level. All model systems HXeY studied here are bound equilibrium structures, but they are also significantly destabilized

  10. Air and metal hydride battery

    Energy Technology Data Exchange (ETDEWEB)

    Lampinen, M.; Noponen, T. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Applied Thermodynamics


    The main goal of the air and metal hydride battery project was to enhance the performance and manufacturing technology of both electrodes to such a degree that an air-metal hydride battery could become a commercially and technically competitive power source for electric vehicles. By the end of the project it was possible to demonstrate the very first prototype of the air-metal hydride battery at EV scale, achieving all the required design parameters. (orig.)

  11. An improved method for the determination of trace levels of arsenic and antimony in geological materials by automated hydride generation-atomic absorption spectroscopy (United States)

    Crock, J.G.; Lichte, F.E.


    An improved, automated method for the determination of arsenic and antimony in geological materials is described. After digestion of the material in sulfuric, nitric, hydrofluoric and perchloric acids, a hydrochloric acid solution of the sample is automatically mixed with reducing agents, acidified with additional hydrochloric acid, and treated with a sodium tetrahydroborate solution to form arsine and stibine. The hydrides are decomposed in a heated quartz tube in the optical path of an atomic absorption spectrometer. The absorbance peak height for arsenic or antimony is measured. Interferences that exist are minimized to the point where most geological materials including coals, soils, coal ashes, rocks and sediments can be analyzed directly without use of standard additions. The relative standard deviation of the digestion and the instrumental procedure is less than 2% at the 50 ??g l-1 As or Sb level. The reagent-blank detection limit is 0.2 ??g l-1 As or Sb. ?? 1982.

  12. Optimization and comparison of chemical and electrochemical hydride generation for optical emission spectrometric determination of arsenic and antimony using a novel miniaturized microwave induced argon plasma exiting the microstrip wafer. (United States)

    Pohl, Pawel; Zapata, Israel Jiménez; Bings, Nicolas H


    Continuous flow (CF) chemical hydride generation (CHG) and electrochemical hydride generation (ECHG) directly coupled to a novel 40W, atmospheric pressure, 2.45GHz microwave microstrip Ar plasma exiting a microstrip wafer has been developed for the emission spectrometric determination of As and Sb using a miniaturized optical fiber spectrometer and a CCD-array detector. The experimental conditions for both procedures were optimized with respect to the relative net intensities of the As I 228.8 nm and Sb I 252.8 nm lines and their signal-to-background intensity ratios. Additionally, the susceptibility to interferences from Cd, Co, Cr, Cu, Fe, Ni, Pb and Zn and other hydride-forming elements in the determination of As and Sb using the CHG and ECHG techniques was investigated in detail. Under the optimized conditions, it was found that ECHG is more prone to interferences compared to CHG. The detection limits (3sigma) of As (6 ngmL(-1)) and Sb (7 ngmL(-1)) obtained for the ECHG-MSP-OES method are about three times lower than in the case of the CHG-MSP-OES method due to a two-fold lower amount of H2 introduced into the MSP in case of the ECHG, resulting in a better plasma stability and reduced background level. The linearity ranges for both calibration curves to a concentration of up to 5 microgmL(-1) and a precision between 2% and 7% (2 microgmL(-1) and 0.050 microgmL(-1) of As and Sb, respectively) were found for both methods. The developed ECHG-MSP-OES method was validated for As through the analysis of a certified coal fly ash standard reference material (NIST SRM 1633a) after sample dissolution. The derived concentration (140+/-8 microgg(-1)) was found to agree well with the certified data (145+/-15 microgg(-1)). The method was also successfully applied to the analysis of both a galvanic bath sample, which contained Sb and was spiked with As, and a tap water sample spiked with both analytes. Recovery rates of 99-101% and a Sb concentration of 6.6 microgmL(-1) in

  13. Erbium hydride decomposition kinetics.

    Energy Technology Data Exchange (ETDEWEB)

    Ferrizz, Robert Matthew


    Thermal desorption spectroscopy (TDS) is used to study the decomposition kinetics of erbium hydride thin films. The TDS results presented in this report are analyzed quantitatively using Redhead's method to yield kinetic parameters (E{sub A} {approx} 54.2 kcal/mol), which are then utilized to predict hydrogen outgassing in vacuum for a variety of thermal treatments. Interestingly, it was found that the activation energy for desorption can vary by more than 7 kcal/mol (0.30 eV) for seemingly similar samples. In addition, small amounts of less-stable hydrogen were observed for all erbium dihydride films. A detailed explanation of several approaches for analyzing thermal desorption spectra to obtain kinetic information is included as an appendix.

  14. Hydride development for hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, G.J.; Guthrie, S.E.; Bauer, W.; Yang, N.Y.C. [Sandia National Lab., Livermore, CA (United States); Sandrock, G. [SunaTech, Inc., Ringwood, NJ (United States)


    The purpose of this project is to develop and demonstrate improved hydride materials for hydrogen storage. The work currently is organized into four tasks: hydride development, bed fabrication, materials support for engineering systems, and IEA Annex 12 activities. At the present time, hydride development is focused on Mg alloys. These materials generally have higher weight densities for storing hydrogen than rare earth or transition metal alloys, but suffer from high operating temperatures, slow kinetic behavior and material stability. The authors approach is to study bulk alloy additions which increase equilibrium overpressure, in combination with stable surface alloy modification and particle size control to improve kinetic properties. This work attempts to build on the considerable previous research in this area, but examines specific alloy systems in greater detail, with attention to known phase properties and structures. The authors have found that specific phases can be produced which have significantly improved hydride properties compared to previous studies.

  15. Complex Hydrides for Hydrogen Storage

    Energy Technology Data Exchange (ETDEWEB)

    Slattery, Darlene; Hampton, Michael


    This report describes research into the use of complex hydrides for hydrogen storage. The synthesis of a number of alanates, (AIH4) compounds, was investigated. Both wet chemical and mechano-chemical methods were studied.

  16. Sodium-based hydrides for thermal energy applications (United States)

    Sheppard, D. A.; Humphries, T. D.; Buckley, C. E.


    Concentrating solar-thermal power (CSP) with thermal energy storage (TES) represents an attractive alternative to conventional fossil fuels for base-load power generation. Sodium alanate (NaAlH4) is a well-known sodium-based complex metal hydride but, more recently, high-temperature sodium-based complex metal hydrides have been considered for TES. This review considers the current state of the art for NaH, NaMgH3- x F x , Na-based transition metal hydrides, NaBH4 and Na3AlH6 for TES and heat pumping applications. These metal hydrides have a number of advantages over other classes of heat storage materials such as high thermal energy storage capacity, low volume, relatively low cost and a wide range of operating temperatures (100 °C to more than 650 °C). Potential safety issues associated with the use of high-temperature sodium-based hydrides are also addressed.

  17. Fractionation and redox speciation of antimony in agricultural soils by hydride generation--atomic fluorescence spectrometry and stability of Sb(III) and Sb(V) during extraction with different extractant solutions. (United States)

    Fuentes, Edwar; Pinochet, Hugo; Potin-Gautier, Martine; De Graegori, Ida


    This stability of Sb(III) and Sb(V) species was studied during single extraction from soils by water. EDTA, diluted H2SO4 and H3PO4, and oxalic acid/oxalate solutions, with and without ascorbic acid, were used as stabilizing reagent of both Sb species. Antimony redox speciation in soil extracts was performed by selective hydride generation-atomic fluorescence spectrometry. Simulated extraction procedures (without soil) showed that, except in oxalate medium, Sb(III) was oxidized to Sb(V), and this reaction was avoided with ascorbic acid. Recovery studies from a spiked agricultural soil showed that no oxidation but sorption of Sb(III) occurred during the extraction process in water and H2SO4 medium, and quantitative oxidation in EDTA and oxalate medium. With ascorbic acid, this oxidation was totally avoided in EDTA and partially avoided in oxalate solution. A new sequential extraction procedure was proposed and applied to the fractionation and redox speciation of antimony in agricultural soils, using EDTA + ascorbic acid, pH 7 (available under complexing and moderately reducible conditions); oxalic acid/oxalate + ascorbic acid (extractable in reducible conditions) and HNO3 + HCl + HF (residual fraction). The proposed extraction scheme can provide information about the availability and mobility of antimony redox species in agricultural soils.

  18. Hydride Olefin complexes of tantalum and niobium

    NARCIS (Netherlands)

    Klazinga, Aan Hendrik


    This thesis describes investigations on low-valent tantalum and niobium hydride and alkyl complexes, particularly the dicyclopentadienyl tantalum hydride olefin complexes Cp2Ta(H)L (L=olefin). ... Zie: Summary

  19. Simultaneous determination of hydride and non-hydride forming elements by inductively coupled plasma optical emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Benzo, Z. [Instituto Venezolano de Investigaciones Cientificas, IVIC, Altos de Pipe, Caracas (Venezuela, Bolivarian Republic of); Matos-Reyes, M.N.; Cervera, M.L.; Guardia, M. de la, E-mail: [Department of Analytical Chemistry, University of Valencia, Valencia (Spain)


    The operating characteristics of a dual nebulization system were studied including instrumental and chemical conditions for the hydride generation and analytical figures of merit for both, hydride and non hydride forming elements. Analytical performance of the nebulization system was characterized by detection limits from 0.002 to 0.0026 {mu}g mL{sup -1} for the hydride forming elements and between 0.0034 and 0.0121 {mu}g mL{sup -1} for the non-hydride forming elements, relative standard deviation for 10 replicate measurements at 0.25 mg L{sup -1} level and recovery percentages between 97 and 103%. The feasibility of the system was demonstrated in the simultaneous determination of Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Zn, As, Bi, Sb, Se, and Te in the NIST 1549 (non-fat milk powder), NIST 1570a (spinach leaves), DORM-2 (dogfish muscle) and TORT-2 (lobster hepatopancreas) certified samples for trace elements. Results found were in good agreement with the certified ones. (author)

  20. Optimization of Internal Cooling Fins for Metal Hydride Reactors

    Directory of Open Access Journals (Sweden)

    Vamsi Krishna Kukkapalli


    Full Text Available Metal hydride alloys are considered as a promising alternative to conventional hydrogen storage cylinders and mechanical hydrogen compressors. Compared to storing in a classic gas tank, metal hydride alloys can store hydrogen at nearly room pressure and use less volume to store the same amount of hydrogen. However, this hydrogen storage method necessitates an effective way to reject the heat released from the exothermic hydriding reaction. In this paper, a finned conductive insert is adopted to improve the heat transfer in the cylindrical reactor. The fins collect the heat that is volumetrically generated in LaNi5 metal hydride alloys and deliver it to the channel located in the center, through which a refrigerant flows. A multiple-physics modeling is performed to analyze the transient heat and mass transfer during the hydrogen absorption process. Fin design is made to identify the optimum shape of the finned insert for the best heat rejection. For the shape optimization, use of a predefined transient heat generation function is proposed. Simulations show that there exists an optimal length for the fin geometry.

  1. The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters (United States)


    AFRL-AFOSR-VA-TR-2016-0075 The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters KIT BOWEN JOHNS HOPKINS UNIV BALTIMORE MD...Hydride and Boron Aluminum Hydride Clusters 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-14-1-0324 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) KIT...of both Aluminum Hydride Cluster Anions and Boron Aluminum Hydride Cluster Anions with Oxygen: Anionic Products The anionic products of reactions

  2. The renaissance of hydrides as energy materials (United States)

    Mohtadi, Rana; Orimo, Shin-Ichi


    Materials based on hydrides have been the linchpin in the development of several practical energy storage technologies, of which the most prominent example is nickel-metal hydride batteries. Motivated by the need to meet the future's energy demand, the past decade has witnessed substantial advancements in the research and development of hydrides as media for hydrogen energy storage. More recently, new and rapidly evolving discoveries have positioned hydrides as highly promising materials for future electrochemical energy storage, such as electrolytes for mono- and divalent batteries, and anodes for lithium-ion batteries. In addition, the potential of hydrides in efficient power transmission has been recently revealed. In this Review, we highlight key advances and illustrate how the versatility of hydrides has not only yielded a meaningful past, but also ensures a very bright future.

  3. Use of hydrides in motor vehicles (United States)

    Toepler, J.; Bernauer, O.; Buchner, H.


    Results of research on hydrogen driven vehicles and hydride storage tanks are presented, along with a detailed discussion of the operational possibilities of low temperature hydrides, such as TiFe-H2, and of high temperature hydrides, such as Mg2Ni-H4. Attention is given to their cyclization stability and thermal conductivity. Heat storage and heat recovery with the aid of hydrides are discussed, and a theoretical hydride storage capacity of a Mg-Ni-alloy is presented. It was concluded that all hydride tanks will be 10 to 20 times heavier than the conventional gasoline tank. The problems of tank weight and gasoline shortage can be solved by a combination hydrogen/gasoline fuel. Existing energy infrastructures must be utilized, as the setting up of a hydrogen infrastructure is, at the present time, both technically and economically unfeasible.

  4. Use of reversible hydrides for hydrogen storage (United States)

    Darriet, B.; Pezat, M.; Hagenmuller, P.


    The addition of metals or alloys whose hydrides have a high dissociation pressure allows a considerable increase in the hydrogenation rate of magnesium. The influence of temperature and hydrogen pressure on the reaction rate were studied. Results concerning the hydriding of magnesium rich alloys such as Mg2Ca, La2Mg17 and CeMg12 are presented. The hydriding mechanism of La2Mg17 and CeMg12 alloys is given.

  5. Anodematerials for Metal Hydride Batteries

    DEFF Research Database (Denmark)

    Jensen, Jens Oluf


    This report describes the work on development of hydride forming alloys for use as electrode materials in metal hydride batteries. The work has primarily been concentrated on calcium based alloys derived from the compound CaNi5. This compound has a higher capacity compared with alloys used in today......’s hydride batteries, but a much poorer stability towards repeated charge/discharge cycling. The aim was to see if the cycleability of CaNi5 could be enhanced enough by modifications to make the compound a suitable electrode material. An alloying method based on mechanical alloying in a planetary ball mill....... The higher stability is explained by a smaller volume expansion during charge. It is shown than sodium can substitute for calcium forming the compound Ca0.8Na0.2Ni5. The compound had CaCu5 structure and a capacity of 365 mAh/g but a poor electrochemical cycle life. The alloys Ca0.8Na0.2Ni4Mg0.5Cu0.5 and Ca...

  6. Lightweight hydrides for automotive storage of hydrogen (United States)

    Rohy, D. A.; Nachman, J. F.; Argabright, T. A.

    The primary objectives of the considered investigations are related to the reduction of the dissociation temperature of lightweight materials, and the development of new lightweight hydrides containing little, if any, critical material. Attention is given to the characteristics of metal hydrides, the characteristics of a magnesium-base alloy which is to be employed in hydrogen storage systems for automobiles, aspects of alloy development, and the evaluation of magnesium hydride alloys with the aid of a hydride cycling rig. New information concerning the effect of cycling on magnesium alloys is discussed.

  7. Liquid chromatography-hydride generation-atomic fluorescence spectrometry determination of arsenic species in dog plasma and its application to a pharmacokinetic study after oral administration of Realgar and Niu Huang Jie Du Pian. (United States)

    Zhang, Yunjing; Qiang, Shuping; Sun, Jing; Song, Min; Hang, Taijun


    A high performance liquid chromatography-hydride generation-atomic fluorescence spectrometry (HPLC-HG-AFS) method was developed for the simultaneous determination of four arsenic species (As(III), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and arsenate As(V)) in dog plasma. Good separation of the four arsenic species was achieved within 15min on an anion-exchange column with isocratic elution using 15mmol/L KH(2)PO(4) (pH 5.9) as eluent at a flow rate of 1.0mL/min. The assay was linear over the range of 1.25-200, 1.56-200, 1.34-172, and 2.50-200ng/mL with the detection limits of 0.80, 1.00, 0.86 and 2.00ng/mL for As(III), DMA, MMA and As(V), respectively. The method was validated for selectivity, precision, accuracy and recovery and then applied to a comparative pharmacokinetic study of the arsenic species in beagle dogs after a single oral administration of Realgar (24.32mg/kg, equivalent to 11.31mgAs/kg) alone or Niu Huang Jie Du Pian (a patent traditional Chinese medicine (TCM), 380mg/kg, equivalent to 28.45mgAs/kg), respectively. DMA was found to be the predominant species in the dog plasma after dosing, with As(V) appeared as the quickly eliminating one. No traces of MMA and As(III) were detected at any sampling time points. The main pharmacokinetic parameters found for DMA p.o. administration of Realgar and Niu Huang Jie Du Pian were as follows: C(max) (14.7±4.2) and (57.0±32.0)ng/mL, T(max) (2.4±0.5) and (2.5±0.5)h, AUC(0-36) (151.1±12.9) and (635.9±418.2)ngh/mL, AUC(0-∞) (206.0±44.5) and (687.2±425.1)ngh/mL, t(1/2) (16.2±7.9) and (9.4±2.2)h, respectively. The influence of compounding in Niu Huang Jie Du Pian on the pharmacokinetics of arsenics was shown with increased transformation of DMA and its faster elimination rate. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. The effect of hydrogen and oxygen contents on hydride reorientations of zirconium alloy cladding tubes

    Directory of Open Access Journals (Sweden)

    Hyun-Jin Cha


    Full Text Available To investigate the effect of hydrogen and oxygen contents on hydride reorientations during cool-down processes, zirconium–niobium cladding tube specimens were hydrogen-charged before some specimens were oxidized, resulting in 250 ppm and 500 ppm hydrogen-charged specimens containing no oxide and an oxide thickness of 3.8 μm at each surface. The nonoxidized and oxidized hydrogen-charged specimens were heated up to 400°C and then cooled down to room temperature at cooling rates of 0.3°C/min and 8.0°C/min under a tensile hoop stress of 150 MPa. The lower hydrogen contents and the slower cooling rate generated a larger fraction of radial hydrides, a longer radial hydride length, and a lower ultimate tensile strength and plastic elongation. In addition, the oxidized specimens generated a smaller fraction of radial hydrides and a lower ultimate tensile strength and plastic elongation than the nonoxidized specimens. This may be due to: a solubility difference between room temperature and 400°C; an oxygen-induced increase in hydrogen solubility and radial hydride nucleation energy; high temperature residence time during the cool-down; or undissolved circumferential hydrides at 400°C.

  9. Kinetics of hydride front in Zircaloy-2 and H release from a fractional hydrided surface

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, M.; Gonzalez-Gonzalez, A.; Moya, J. S.; Remartinez, B.; Perez, S.; Sacedon, J. L. [Instituto de Ciencia de Materiales de Madrid (CSIC), Sor Juana Ines de la Cruz 3, Cantoblanco, 28049 Madrid (Spain); Iberdrola, Tomas Redondo 3, 28033 Madrid (Spain); Instituto de Ciencia de Materiales de Madrid (CSIC), Sor Juana Ines de la Cruz 3, Cantoblanco, 28049 Madrid (Spain)


    The authors study the hydriding process on commercial nuclear fuel claddings from their inner surface using an ultrahigh vacuum method. The method allows determining the incubation and failure times of the fuel claddings, as well as the dissipated energy and the partial pressure of the desorbed H{sub 2} from the outer surface of fuel claddings during the hydriding process. The correlation between the hydriding dissipated energy and the amount of zirconium hydride (formed at different stages of the hydriding process) leads to a near t{sup 1/2} potential law corresponding to the time scaling of the reaction for the majority of the tested samples. The calibrated relation between energy and hydride thickness allows one to calculate the enthalpy of the {delta}-ZrH{sub 1.5} phase. The measured H{sub 2} desorption from the external surface is in agreement with a proposed kinetic desorption model from the hydrides precipitated at the surface.

  10. Ionic conduction of lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Pilipenko, G.I.; Oparin, D.V.; Zhuravlev, N.A.; Gavrilov, F.F.


    Using the electrical-conductivity- and NMR-measurement- methods, the ionic-conduction mechanism is established in stoichiometric lithium hydride single crystals. The activation energies of migration of anion- and cation-vacancies and the formation of Schottky-pair defects are determined. They assume that the mechanisms of self-diffusion and conductivity are different in lithium hydride.

  11. Predicting formation enthalpies of metal hydrides

    DEFF Research Database (Denmark)

    Andreasen, A.


    In order for the hydrogen based society viz. a society in which hydrogen is the primary energy carrier to become realizable an efficient way of storing hydrogen is required. For this purpose metal hydrides are serious candidates. Metal hydrides are formedby chemical reaction between hydrogen...

  12. Erbium hydride thermal desorption : controlling kinetics.

    Energy Technology Data Exchange (ETDEWEB)

    Ferrizz, Robert Matthew


    Thermal desorption spectroscopy (TDS) is used to study the decomposition kinetics of erbium hydride thin films. The TDS results presented in this report show that hydride film processing parameters directly impact thermal stability. Issues to be addressed include desorption kinetics for dihydrides and trihydrides, and the effect of film growth parameters, loading parameters, and substrate selection on desorption kinetics.

  13. Corrosion resistance of neodymium and dysprosium hydrides (United States)

    Karakchieva, Natalia; Lyamina, Galina; Knyazeva, Elena; Sachkov, Victor; Kurzina, Irina; Pichugina, Alina; Vladimirov, Alexander; Kazantseva, Ludmila; Sachkova, Anna


    This paper describes the methods of obtaining hydrides of rare earth elements such as dysprosium and neodymium. The properties and corrosion resistance of these elements are investigated. A synthesis method of monophasic dysprosium and neodymium dihydrides is presented. Synthesized dihydrides are agglomerates with an average size of 3-50 µm and are formed by crystalline grains of a nanometer size. BET specific surface area, morphology, elemental analyses and composition of samples have been studied. Corrosion stability in aqueous solutions of hydrochloric acid and sodium hydroxide were studied. It was determined that both hydrides undergo hydrolysis in acid and alkaline mediums. Neodymium hydride is more stable to corrosion than dysprosium hydride, which is proved by its longer exposure to aggressive medium to hydrides. The formation of insoluble /poorly soluble products of corrosion can make a significant contribution to the process of powder dissolution.

  14. Production of propylene from 1-butene on highly active "bi-functional single active site" catalyst: Tungsten carbene-hydride supported on alumina

    KAUST Repository

    Mazoyer, Etienne


    1-Butene is transformed in a continuous flow reactor over tungsten hydrides precursor W-H/Al2O3, 1, giving a promising yield into propylene at 150 °C and different pressures. Tungsten carbene-hydride single active site operates as a "bi-functional catalyst" through 1-butene isomerization on W-hydride and 1-butene/2-butenes cross-metathesis on W-carbene. This active moiety is generated in situ at the initiation steps by insertion of 1-butene on tungsten hydrides precursor W-H/Al2O3, 1 followed by α-H and β-H abstraction. © 2011 American Chemical Society.

  15. Hydrogen-storing hydride complexes (United States)

    Srinivasan, Sesha S [Tampa, FL; Niemann, Michael U [Venice, FL; Goswami, D Yogi [Tampa, FL; Stefanakos, Elias K [Tampa, FL


    A ternary hydrogen storage system having a constant stoichiometric molar ratio of LiNH.sub.2:MgH.sub.2:LiBH.sub.4 of 2:1:1. It was found that the incorporation of MgH.sub.2 particles of approximately 10 nm to 20 nm exhibit a lower initial hydrogen release temperature of C. Furthermore, it is observed that the particle size of LiBNH quaternary hydride has a significant effect on the hydrogen sorption concentration with an optimum size of 28 nm. The as-synthesized hydrides exhibit two main hydrogen release temperatures, one around C. and the other around C., with the main hydrogen release temperature reduced from C. to C., while hydrogen is first reversibly released at temperatures as low as C. with a total hydrogen capacity of 6 wt. % to 8 wt. %. Detailed thermal, capacity, structural and microstructural properties have been demonstrated and correlated with the activation energies of these materials.

  16. Metal Hydrides for Rechargeable Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Valoeen, Lars Ole


    Rechargeable battery systems are paramount in the power supply of modern electronic and electromechanical equipment. For the time being, the most promising secondary battery systems for the future are the lithium-ion and the nickel metal hydride (NiMH) batteries. In this thesis, metal hydrides and their properties are described with the aim of characterizing and improving those. The thesis has a special focus on the AB{sub 5} type hydrogen storage alloys, where A is a rare earth metal like lanthanum, or more commonly misch metal, which is a mixture of rare earth metals, mainly lanthanum, cerium, neodymium and praseodymium. B is a transition metal, mainly nickel, commonly with additions of aluminium, cobalt, and manganese. The misch metal composition was found to be very important for the geometry of the unit cell in AB{sub 5} type alloys, and consequently the equilibrium pressure of hydrogen in these types of alloys. The A site substitution of lanthanum by misch metal did not decrease the surface catalytic properties of AB{sub 5} type alloys. B-site substitution of nickel with other transition elements, however, substantially reduced the catalytic activity of the alloy. If the internal pressure within the electrochemical test cell was increased using inert argon gas, a considerable increase in the high rate charge/discharge performance of LaNi{sub 5} was observed. An increased internal pressure would enable the utilisation of alloys with a high hydrogen equivalent pressure in batteries. Such alloys often have favourable kinetics and high hydrogen diffusion rates and thus have a potential for improving the high current discharge rates in metal hydride batteries. The kinetic properties of metal hydride electrodes were found to improve throughout their lifetime. The activation properties were found highly dependent on the charge/discharge current. Fewer charge/discharge cycles were needed to activate the electrodes if a small current was used instead of a higher

  17. Hydride heat pump with heat regenerator (United States)

    Jones, Jack A. (Inventor)


    A regenerative hydride heat pump process and system is provided which can regenerate a high percentage of the sensible heat of the system. A series of at least four canisters containing a lower temperature performing hydride and a series of at least four canisters containing a higher temperature performing hydride is provided. Each canister contains a heat conductive passageway through which a heat transfer fluid is circulated so that sensible heat is regenerated. The process and system are useful for air conditioning rooms, providing room heat in the winter or for hot water heating throughout the year, and, in general, for pumping heat from a lower temperature to a higher temperature.

  18. Decomposition kinetics of plutonium hydride

    Energy Technology Data Exchange (ETDEWEB)

    Haschke, J.M.; Stakebake, J.L.


    Kinetic data for decomposition of PuH/sub 1/ /sub 95/ provides insight into a possible mechanism for the hydriding and dehydriding reactions of plutonium. The fact that the rate of the hydriding reaction, K/sub H/, is proportional to P/sup 1/2/ and the rate of the dehydriding process, K/sub D/, is inversely proportional to P/sup 1/2/ suggests that the forward and reverse reactions proceed by opposite paths of the same mechanism. The P/sup 1/2/ dependence of hydrogen solubility in metals is characteristic of the dissociative absorption of hydrogen; i.e., the reactive species is atomic hydrogen. It is reasonable to assume that the rates of the forward and reverse reactions are controlled by the surface concentration of atomic hydrogen, (H/sub s/), that K/sub H/ = c'(H/sub s/), and that K/sub D/ = c/(H/sub s/), where c' and c are proportionality constants. For this surface model, the pressure dependence of K/sub D/ is related to (H/sub s/) by the reaction (H/sub s/) reversible 1/2H/sub 2/(g) and by its equilibrium constant K/sub e/ = (H/sub 2/)/sup 1/2//(H/sub s/). In the pressure range of ideal gas behavior, (H/sub s/) = K/sub e//sup -1/(RT)/sup -1/2/ and the decomposition rate is given by K/sub D/ = cK/sub e/(RT)/sup -1/2/P/sup 1/2/. For an analogous treatment of the hydriding process with this model, it can be readily shown that K/sub H/ = c'K/sub e//sup -1/(RT)/sup -1/2/P/sup 1/2/. The inverse pressure dependence and direct temperature dependence of the decomposition rate are correctly predicted by this mechanism which is most consistent with the observed behavior of the Pu--H system.

  19. Electrochemical process and production of novel complex hydrides (United States)

    Zidan, Ragaiy


    A process of using an electrochemical cell to generate aluminum hydride (AlH.sub.3) is provided. The electrolytic cell uses a polar solvent to solubilize NaAlH.sub.4. The resulting electrochemical process results in the formation of AlH.sub.3. The AlH.sub.3 can be recovered and used as a source of hydrogen for the automotive industry. The resulting spent aluminum can be regenerated into NaAlH.sub.4 as part of a closed loop process of AlH.sub.3 generation.

  20. Disposal of tritium-exposed metal hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Nobile, A.; Motyka, T.


    A plan has been established for disposal of tritium-exposed metal hydrides used in Savannah River Site (SRS) tritium production or Materials Test Facility (MTF) R&D operations. The recommended plan assumes that the first tritium-exposed metal hydrides will be disposed of after startup of the Solid Waste Disposal Facility (SWDF) Expansion Project in 1992, and thus the plan is consistent with the new disposal requiremkents that will be in effect for the SWDF Expansion Project. Process beds containing tritium-exposed metal hydride powder will be disposed of without removal of the powder from the bed; however, disposal of tritium-exposed metal hydride powder that has been removed from its process vessel is also addressed.

  1. gamma-Zr-Hydride Precipitate in Irradiated Massive delta- Zr-Hydride

    DEFF Research Database (Denmark)

    Warren, M. R.; Bhattacharya, D. K.


    During examination of A Zircaloy-2-clad fuel pin, which had been part of a test fuel assembly in a boiling water reactor, several regions of severe internal hydriding were noticed in the upper-plenum end of the pin. Examination of similar fuel pins has shown that hydride of this type is caused...

  2. Lattice-Hydride Mechanism in Electrocatalytic CO2 Reduction by Structurally Precise Copper-Hydride Nanoclusters. (United States)

    Tang, Qing; Lee, Yongjin; Li, Dai-Ying; Choi, Woojun; Liu, C W; Lee, Dongil; Jiang, De-En


    Copper electrocatalysts can reduce CO2 to hydrocarbons at high overpotentials. However, a mechanistic understanding of CO2 reduction on nanostructured Cu catalysts has been lacking. Herein we show that the structurally precise ligand-protected Cu-hydride nanoclusters, such as Cu32H20L12 (L is a dithiophosphate ligand), offer unique selectivity for electrocatalytic CO2 reduction at low overpotentials. Our density functional theory (DFT) calculations predict that the presence of the negatively charged hydrides in the copper cluster plays a critical role in determining the selectivity of the reduction product, yielding HCOOH over CO with a lower overpotential. The HCOOH formation proceeds via the lattice-hydride mechanism: first, surface hydrides reduce CO2 to HCOOH product, and then the hydride vacancies are readily regenerated by the electrochemical proton reduction. DFT calculations further predict that hydrogen evolution is less competitive than HCOOH formation at the low overpotential. Confirming the predictions, electrochemical tests of CO2 reduction on the Cu32H20L12 cluster demonstrate that HCOOH is indeed the main product at low overpotential, while H2 production dominates at higher overpotential. The unique selectivity afforded by the lattice-hydride mechanism opens the door for further fundamental and applied studies of electrocatalytic CO2 reduction by copper-hydride nanoclusters and other metal nanoclusters that contain hydrides.

  3. Reactivity patterns of transition metal hydrides and alkyls

    Energy Technology Data Exchange (ETDEWEB)

    Jones, W.D. II


    The complex PPN/sup +/ CpV(CO)/sub 3/H/sup -/ (Cp=eta/sup 5/-C/sub 5/H/sub 5/ and PPN = (Ph/sub 3/P)/sub 2/) was prepared in 70% yield and its physical properties and chemical reactions investigated. PPN/sup +/ CpV(CO)/sub 3/H/sup -/ reacts with a wide range of organic halides. The organometallic products of these reactions are the vanadium halides PPN/sup +/(CpV(C)/sub 3/X)/sup -/ and in some cases the binuclear bridging hydride PPN/sup +/ (CpV(CO)/sub 3/)/sub 2/H/sup -/. The borohydride salt PPN/sup +/(CpV(CO)/sub 3/BH/sub 4/)/sup -/ has also been prepared. The reaction between CpV(CO)/sub 3/H/sup -/ and organic halides was investigated and compared with halide reductions carried out using tri-n-butyltin hydride. Results demonstrate that in almost all cases, the reduction reaction proceeds via free radical intermediates which are generated in a chain process, and are trapped by hydrogen transfer from CpV(CO)/sub 3/H/sup -/. Sodium amalgam reduction of CpRh(CO)/sub 2/ or a mixture of CpRh(CO)/sub 2/ and CpCo(CO)/sub 2/ affords two new anions, PPN/sup +/ (Cp/sub 2/Rh/sub 3/(CO)/sub 4/)/sup -/ and PPN/sup +/(Cp/sub 2/RhCo(CO)/sub 2/)/sup -/. CpMo(CO)/sub 3/H reacts with CpMo(CO)/sub 3/R (R=CH/sub 3/,C/sub 2/H/sub 5/, CH/sub 2/C/sub 6/H/sub 5/) at 25 to 50/sup 0/C to produce aldehyde RCHO and the dimers (CpMo(CO)/sub 3/)/sub 2/ and (CpMo(CO)/sub 2/)/sub 2/. In general, CpV(CO)/sub 3/H/sup -/ appears to transfer a hydrogen atom to the metal radical anion formed in an electron transfer process, whereas CpMo(CO)/sub 3/H transfers hydride in a 2-electron process to a vacant coordination site. The chemical consequences are that CpV(CO)/sub 3/H/sup -/ generally reacts with metal alkyls to give alkanes via intermediate alkyl hydride species whereas CpMo(CO)/sub 3/H reacts with metal alkyls to produce aldehyde, via an intermediate acyl hydride species.

  4. The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components Delayed Hydride Cracking

    CERN Document Server

    Puls, Manfred P


    By drawing together the current theoretical and experimental understanding of the phenomena of delayed hydride cracking (DHC) in zirconium alloys, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components: Delayed Hydride Cracking provides a detailed explanation focusing on the properties of hydrogen and hydrides in these alloys. Whilst the focus lies on zirconium alloys, the combination of both the empirical and mechanistic approaches creates a solid understanding that can also be applied to other hydride forming metals.   This up-to-date reference focuses on documented research surrounding DHC, including current methodologies for design and assessment of the results of periodic in-service inspections of pressure tubes in nuclear reactors. Emphasis is placed on showing that our understanding of DHC is supported by progress across a broad range of fields. These include hysteresis associated with first-order phase transformations; phase relationships in coherent crystalline metallic...

  5. Preliminary development of flaw evaluation procedures for delayed hydride cracking initiation under hydride non-ratcheting conditions

    Energy Technology Data Exchange (ETDEWEB)

    Xu, S.; Cui, J.; Kawa, D.; Shek, G.K.; Scarth, D.A. [Kinectrics Inc., Toronto, Ontario (Canada)


    The flaw evaluation procedure for Delayed Hydride Cracking (DHC) initiation currently provided in the CSA Standard N285.8 was developed for hydride ratcheting conditions, in which flaw-tip hydrides do not completely dissolve at peak temperature. Test results have shown that hydrided regions formed under non-ratcheting conditions, in which flaw-tip hydrides completely dissolve at peak temperature, have significantly higher resistance to cracking than those formed under ratcheting conditions. This paper presents some preliminary work on the development of a procedure for the evaluation of DHC initiation for flaws under hydride non-ratcheting conditions. (author)

  6. First principles centroid molecular dynamics simulation of hydride in nanoporous C12A7:H- (United States)

    Ikeda, Takashi


    Hydrides in nanoporous [Ca24Al28O64]4+(H-)4 (C12A7:H-) were investigated via first principles centroid molecular dynamics (CMD). The quality of our CMD simulations was assessed by examining the temperature dependence of the distribution of hydrides in the cages constituting the C12A7 framework. The vibrational states of C12A7:H- were analyzed by using the trajectories of the centroids generated in our CMD simulations. We find that the rattling motions of H- and D- behave qualitatively differently, resulting in non-trivial isotope effects, which are suggested to be detectable by using infrared and Raman spectroscopy.

  7. Synthesis of Nano-Light Magnesium Hydride for Hydrogen Storage ...

    African Journals Online (AJOL)

    Abstract. Nano-light magnesium hydride that has the capability for hydrogen storage was synthesized from treatment of magnesium ribbon with hydrogen peroxide. The optimum time for complete hydrogenation of the magnesium hydride was 5 hours.

  8. Hydride heat pump. Volume I. Users manual for HYCSOS system design program. [HYCSOS code

    Energy Technology Data Exchange (ETDEWEB)

    Gorman, R.; Moritz, P.


    A method for the design and costing of a metal hydride heat pump for residential use and a computer program, HYCSOS, which automates that method are described. The system analyzed is one in which a metal hydride heat pump can provide space heating and space cooling powered by energy from solar collectors and electric power generated from solar energy. The principles and basic design of the system are presented, and the computer program is described giving detailed design and performance equations used in the program. The operation of the program is explained, and a sample run is presented. This computer program is part of an effort to design, cost, and evaluate a hydride heat pump for residential use. The computer program is written in standard Fortran IV and was run on a CDC Cyber 74 and Cyber 174 computer. A listing of the program is included as an appendix. This report is Volume 1 of a two-volume document.

  9. Hydrogen storage in complex metal hydrides

    Directory of Open Access Journals (Sweden)



    Full Text Available Complex metal hydrides such as sodium aluminohydride (NaAlH4 and sodium borohydride (NaBH4 are solid-state hydrogen-storage materials with high hydrogen capacities. They can be used in combination with fuel cells as a hydrogen source thus enabling longer operation times compared with classical metal hydrides. The most important point for a wide application of these materials is the reversibility under moderate technical conditions. At present, only NaAlH4 has favourable thermodynamic properties and can be employed as a thermally reversible means of hydrogen storage. By contrast, NaBH4 is a typical non- -reversible complex metal hydride; it reacts with water to produce hydrogen.

  10. Laboratory Rotational Spectroscopy of Astrophysical Interesting Diatomic Hydrides (United States)

    Halfen, DeWayne; Ziurys, L.


    Diatomic hydride are among the most common molecular species in the interstellar medium (ISM). The low molecular mass and thus moments of inertia cause their rotational spectra to lie entirely in the submillimeter and far-infrared regions. Hence, the future airborne and space-borne platforms, such as SOFIA and Herschel, are primed to explore these prevalent molecules. However, in order to detect these species in the ISM, their rotational spectra must first be measured in the laboratory. Using submillimeter direct absorption methods in the Ziurys laboratory, we have recorded the spectra of several diatomic hydrides of astrophysical interest. We have measured the pure rotational spectrum of MnH (X7Σ+: N = 0 - 1) and MnD (N = 2 - 3), as well as the deuterium and carbon-13 isotopologues of CH, CD (X2Πr: N = 1 - 1 and 1 - 2) and 13CH (N = 1 - 1). Manganese hydride and deuteride were created in a DC discharge of H2 or D2 and manganese vapor, generated in a Broida-type oven. CD and 13CH were produced in an AC discharge of argon and CD4 or 13CH4. For MnH, the five strongest manganese hyperfine transitions were recorded in its N = 0 - 1 transition, each of which are additionally split by hydrogen hyperfine interactions. CD and 13CH also have multiple hyperfine components due to the D, 13C, and/or H atoms. The direct measurement of these fundamental transitions will allow for unambiguous astronomical detections. The results of these studies will be presented.

  11. Hydride formation on deformation twin in zirconium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju-Seong [Korea Atomic Energy Research Institute, 989-111 Daedeokdaero, Yuseong-gu, Daejeon, 305-353 (Korea, Republic of); Kim, Sung-Dae [Korea Institute of Material Science (KIMS), 797 Changwondaero, Changwon, Gyeongnam, 642-831 (Korea, Republic of); Yoon, Jonghun, E-mail: [Department of Mechanical Engineering, Hanyang University, 1271 Sa3-dong, Sangrok-gu, Ansan-si, Gyeonggi-do, 426-791 (Korea, Republic of)


    Hydrides deteriorate the mechanical properties of zirconium (Zr) alloys used in nuclear reactors. Intergranular hydrides that form along grain boundaries have been extensively studied due to their detrimental effects on cracking. However, it has been little concerns on formation of Zr hydrides correlated with deformation twins which is distinctive heterogeneous nucleation site in hexagonal close-packed metals. In this paper, the heterogeneous precipitation of Zr hydrides at the twin boundaries was visualized using transmission electron microscopy. It demonstrates that intragranular hydrides in the twinned region precipitates on the rotated habit plane by the twinning and intergranular hydrides precipitate along the coherent low energy twin boundaries independent of the conventional habit planes. Interestingly, dislocations around the twin boundaries play a substantial role in the nucleation of Zr hydrides by reducing the misfit strain energy.

  12. The electrochemical impedance of metal hydride electrodes

    DEFF Research Database (Denmark)

    Valøen, Lars Ole; Lasia, Andrzej; Jensen, Jens Oluf


    The electrochemical impedance responses for different laboratory type metal hydride electrodes were successfully modeled and fitted to experimental data for AB5 type hydrogen storage alloys as well as one MgNi type electrode. The models fitted the experimental data remarkably well. Several AC equ...

  13. Lab-size rechargeable metal hydride-air cells

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Wei-Kang; Noreus, Dag [Department of Materials and Enviromental Chemistry, Arrhenius Laboratory, Stockholm University, S-106 91 Stockholm (Sweden)


    Lab-size rechargeable metal hydride-air (MH-air) cells with a gas management device were designed in order to minimize the loss of electrolyte. An AB{sub 5}-type hydrogen storage alloy was used as anode materials of the MH-air. The thickness of the metal hydride electrodes was in the range of 3.0-3.4 mm. Porous carbon-based air electrodes with Ag{sub 2}O catalysts were used as bi-functional electrodes for oxygen reduction and generation. The electrodes were first examined in half-cells to evaluate their performance and then assembled into one MH-air cell. The results showed the good cycling stability of the rechargeable MH-air cell with a capacity of 1990 mAh. The discharge voltage was 0.69 V at 0.05-0.1 C. The charge efficiency was about 90%. The specific and volumetric energy densities were about 95Wh kg{sup -1} and 140 Wh L{sup -1}, respectively. (author)

  14. The challenge of storage in the hydrogen energy cycle: nanostructured hydrides as a potential solution


    Hanlon, James M.; Reardon, Hazel; Tapia-Ruiz, Nuria; Gregory, Duncan H.


    Hydrogen has the capacity to provide society with the means to carry ‘green’ energy between the point of generation and the point of use. A sustainable energy society in which a hydrogen economy predominates will require renewable generation provided, for example, by artificial photosynthesis and clean, efficient energy conversion effected, for example, by hydrogen fuel cells. Vital in the hydrogen cycle is the ability to store hydrogen safely and effectively. Solid-state storage in hydrides ...

  15. Numerical study of a magnesium hydride tank (United States)

    Delhomme, Baptiste; de Rango, Patricia; Marty, Philippe


    Hydrogen storage in metal hydride tanks (MHT) is a very promising solution. Several experimental tanks, studied by different teams, have already proved the feasibility and the interesting performances of this solution. However, in much cases, an optimization of tank geometry is still needed in order to perform fast hydrogen loading. The development of efficient numerical tools is a key issue for MHT design and optimization. We propose a simple model representing a metal hydride tank exchanging its heat of reaction with a thermal fluid flow. In this model, the radial and axial discretisations have been decoupled by using Matlab® one-dimensional tools. Calculations are compared to experimental results obtained in a previous study. A good agreement is found for the loading case. The discharging case shows some discrepancies, which are discussed in this paper.

  16. Nickel metal hydride LEO cycle testing (United States)

    Lowery, Eric


    The George C. Marshall Space Flight Center is working to characterize aerospace AB5 Nickel Metal Hydride (NiMH) cells. The cells are being evaluated in terms of storage, low earth orbit (LEO) cycling, and response to parametric testing (high rate charge and discharge, charge retention, pulse current ability, etc.). Cells manufactured by Eagle Picher are the subjects of the evaluation. There is speculation that NiMH cells may become direct replacements for current Nickel Cadmium cells in the near future.

  17. Facile Synthesis of Permethyl Yttrocene Hydride

    NARCIS (Netherlands)

    Haan, Klaas H. den; Teuben, Jan H.


    A convenient three step synthesis of (Cp*2YH)n (Cp* = C5Me5) is described starting with YCl3.3thf, in which Cp*2YCl.thf and Cp*2YCH(SiMe3)2 are intermediates, which could be isolated and characterized. The hydride is active in the activation of sp2 and sp3 C-H bonds as was demonstrated by the H-D

  18. Modelling zirconium hydrides using the special quasirandom structure approach

    KAUST Repository

    Wang, Hao


    The study of the structure and properties of zirconium hydrides is important for understanding the embrittlement of zirconium alloys used as cladding in light water nuclear reactors. Simulation of the defect processes is complicated due to the random distribution of the hydrogen atoms. We propose the use of the special quasirandom structure approach as a computationally efficient way to describe this random distribution. We have generated six special quasirandom structure cells based on face centered cubic and face centered tetragonal unit cells to describe ZrH2-x (x = 0.25-0.5). Using density functional theory calculations we investigate the mechanical properties, stability, and electronic structure of the alloys. © the Owner Societies 2013.

  19. Multisyringe flow injection lab-on-valve systems coupled to hydride generation atomic fluorescence spectrometry for on-line bead-injection preconcentration and determination of total inorganic arsenic in environmental waters

    DEFF Research Database (Denmark)

    Long, Xiangbao; Miró, Manuel; Hansen, Elo Harald

    stream network is assembled for accurate handling of solutions and on-line post column derivatization of the eluate for the generation of the volatile species. The potential of the new hyphenated technique for environmental assays was ascertained via the determination of ultratrace levels of total...

  20. Application of Factorial Designs and Simplex Optimisation in the Development of Flow Injection-Hydride Generation-Graphite Furnace Atomic Absorption Spectrometry Procedures as Demonstrated for the Determination of Trace Levels of Germanium

    DEFF Research Database (Denmark)

    Hilligsøe, Bo; Hansen, Elo Harald


    The optimisation of a volume-based FI-HG-GFAAS procedure is described for the trace determination of Ge, comprising in situ collection of the generated germane in the graphite furnace. The response function is the peak area readout (A*s). Based on a preliminary study, where factorial designs were...

  1. Creating nanoshell on the surface of titanium hydride bead

    Directory of Open Access Journals (Sweden)

    PAVLENKO Vyacheslav Ivanovich


    Full Text Available The article presents data on the modification of titanium hydride bead by creating titanium nanoshell on its surface by ion-plasma vacuum magnetron sputtering. To apply titanium nanoshell on the titanium hydride bead vacuum coating plant of multifunctional nanocomposite coatings QVADRA 500 located in the center of high technology was used. Analysis of the micrographs of the original surface of titanium hydride bead showed that the microstructure of the surface is flat, smooth, in addition the analysis of the microstructure of material surface showed the presence of small porosity, roughness, mainly cavities, as well as shallow longitudinal cracks. The presence of oxide film in titanium hydride prevents the free release of hydrogen and fills some micro-cracks on the surface. Differential thermal analysis of both samples was conducted to determine the thermal stability of the initial titanium hydride bead and bead with applied titanium nanoshell. Hydrogen thermal desorption spectra of the samples of the initial titanium hydride bead and bead with applied titanium nanoshell show different thermal stability of compared materials in the temperature range from 550 to 860о C. Titanium nanoshells applied in this way allows increasing the heat resistance of titanium hydride bead – the temperature of starting decomposition is 695о C and temperature when decomposition finishes is more than 1000о C. Modified in this way titanium hydride bead can be used as a filler in the radiation protective materials used in the construction or upgrading biological protection of nuclear power plants.

  2. Novel baker's yeast catalysed hydride reduction of an epoxide moiety

    CSIR Research Space (South Africa)

    Horak, RM


    Full Text Available .m.r, and mass spectroscopy and appears to be due to a novel enzyme catalysed hydride transfer from cofactors such as NADH or NADPH. No example of an enzyme catalysed hydride opening of an epoxide has been reported in the literature. The stereochemical...

  3. Electrochemical and Optical Properties of Magnesium-Alloy Hydrides Reviewed

    Directory of Open Access Journals (Sweden)

    Thirugnasambandam G. Manivasagam


    Full Text Available As potential hydrogen storage media, magnesium based hydrides have been systematically studied in order to improve reversibility, storage capacity, kinetics and thermodynamics. The present article deals with the electrochemical and optical properties of Mg alloy hydrides. Electrochemical hydrogenation, compared to conventional gas phase hydrogen loading, provides precise control with only moderate reaction conditions. Interestingly, the alloy composition determines the crystallographic nature of the metal-hydride: a structural change is induced from rutile to fluorite at 80 at.% of Mg in Mg-TM alloy, with ensuing improved hydrogen mobility and storage capacity. So far, 6 wt.% (equivalent to 1600 mAh/g of reversibly stored hydrogen in MgyTM(1-yHx (TM: Sc, Ti has been reported. Thin film forms of these metal-hydrides reveal interesting electrochromic properties as a function of hydrogen content. Optical switching occurs during (dehydrogenation between the reflective metal and the transparent metal hydride states. The chronological sequence of the optical improvements in optically active metal hydrides starts with the rare earth systems (YHx, followed by Mg rare earth alloy hydrides (MgyGd(1-yHx and concludes with Mg transition metal hydrides (MgyTM(1-yHx. In-situ optical characterization of gradient thin films during (dehydrogenation, denoted as hydrogenography, enables the monitoring of alloy composition gradients simultaneously.

  4. Complex Metal Hydrides for Hydrogen, Thermal and Electrochemical Energy Storage

    DEFF Research Database (Denmark)

    Moller, Kasper T.; Sheppard, Drew; Ravnsbaek, Dorthe B.


    how complex metal hydrides may act in an integrated setup with a fuel cell. This review focuses on the unique properties of light element complex metal hydrides mainly based on boron, nitrogen and aluminum, e.g., metal borohydrides and metal alanates. Our hope is that this review can provide new...

  5. Photochromism of rare-earth metal-oxy-hydrides (United States)

    Nafezarefi, F.; Schreuders, H.; Dam, B.; Cornelius, S.


    Recently, thin films of yttrium oxy-hydride (YOxHy) were reported to show an unusual color-neutral photochromic effect promising for application in smart windows. Our present work demonstrates that also oxy-hydrides based on Gd, Dy, and Er have photochromic properties and crystal structures similar to YOxHy. Compared to YOxHy, the optical bandgaps of the lanthanide based oxy-hydrides are smaller while photochromic contrast and kinetics show large variation among different cations. Based on these findings, we propose that cation alloying is a viable pathway to tailor the photochromic properties of oxy-hydride materials. Furthermore, we predict that the oxy-hydrides of the other lanthanides are also potentially photochromic.

  6. Helium trapping at erbium oxide precipitates in erbium hydride

    Energy Technology Data Exchange (ETDEWEB)

    Foiles, Stephen M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Battaile, Corbett Chandler [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)


    The formation of He bubbles in erbium tritides is a significant process in the aging of these materials. Due to the long-standing uncertainty about the initial nucleation process of these bubbles, there is interest in mechanisms that can lead to the localization of He in erbium hydrides. Previous work has been unable to identify nucleation sites in homogeneous erbium hydride. This work builds on the experimental observation that erbium hydrides have nano- scale erbium oxide precipitates due to the high thermodynamic stability of erbium oxide and the ubiquitous presence of oxygen during materials processing. Fundamental DFT calculations indicate that the He is energetically favored in the oxide relative to the bulk hydride. Activation energies for the motion of He in the oxide and at the oxide-hydride interface indicate that trapping is kinetically feasible. A simple kinetic Monte Carlo model is developed that demonstrates the degree of trapping of He as a function of temperature and oxide fraction.

  7. Metal hydrides for concentrating solar thermal power energy storage (United States)

    Sheppard, D. A.; Paskevicius, M.; Humphries, T. D.; Felderhoff, M.; Capurso, G.; Bellosta von Colbe, J.; Dornheim, M.; Klassen, T.; Ward, P. A.; Teprovich, J. A.; Corgnale, C.; Zidan, R.; Grant, D. M.; Buckley, C. E.


    The development of alternative methods for thermal energy storage is important for improving the efficiency and decreasing the cost of concentrating solar thermal power. We focus on the underlying technology that allows metal hydrides to function as thermal energy storage (TES) systems and highlight the current state-of-the-art materials that can operate at temperatures as low as room temperature and as high as 1100 °C. The potential of metal hydrides for thermal storage is explored, while current knowledge gaps about hydride properties, such as hydride thermodynamics, intrinsic kinetics and cyclic stability, are identified. The engineering challenges associated with utilising metal hydrides for high-temperature TES are also addressed.

  8. Simultaneous speciation analysis of Sb(III), Sb(V) and (CH3)3SbCl2 by high performance liquid chromatography-hydride generation-atomic fluorescence spectrometry detection (HPLC-HG-AFS): application to antimony speciation in sea water. (United States)

    De Gregori, Ida; Quiroz, Waldo; Pinochet, Hugo; Pannier, Florence; Potin-Gautier, Martine


    This paper presents an improvement for the simultaneous separation of Sb(V), Sb(III) and (CH3)3SbCl2 species by high performance liquid chromatography (HPLC) and its detection by hydride generation-atomic fluorescence spectrometry (HG-AFS). The separation was performed on an anion exchange column PRP-X100 using a gradient elution program between EDTA/KHP (potasium hydrogen phtalate) as first mobile phase and phosphate solutions solution as the second one. The chromatographic separation and the HG-AFS parameters were optimized by experimental design. The best results were obtained by using an elution program with 20 mmol l(-1) EDTA + 2 mmol(-01) KHP solution at pH 4.5, during 1.15 min, then change to 50 mmol l(-1) (NH4)2HPO4 solution at pH 8.3, switching back after 4.0 min to the first mobile phase, until 5 min, with a constant flow rate of 1.5 ml min(-1). Retention time of Sb(V), Sb(III) and trimethylantimony species were 1.22, 2.31 and 3.45 min and the detection limits were 0.13; 0.07 and 0.13 microg l(-1), respectively. Studies on the stability of this antimony species in sea water samples on the function of the elapsed time of storage in refrigerator at 4 degrees C was performed employing the optimized method. Results revealed that Sb(III) is easily oxidized within some hours to Sb(V) in sea water stored at 4 degrees C. However, when the sea water was immediately mixed with EDTA no oxidation of Sb(III) was observed up to 1 week of storage. The proposed methodology was then applied to the antimony speciation in sea water samples.

  9. Separation/preconcentration of ultra-trace levels of inorganic Sb and Se from different sample matrices by charge transfer sensitized ion-pairing using ultrasonic-assisted cloud point extraction prior to their speciation and determination by hydride generation AAS. (United States)

    Altunay, Nail; Gürkan, Ramazan


    In the existing study, a new, simple and low cost process for separation/preconcentration of ultra-trace level of inorganic Sb and Se from natural waters, beverages and foods using ultrasonic-assisted cloud point extraction (UA-CPE) prior to their speciation and determination by hydride generation AAS, is proposed. The process is based on charge transfer sensitized complex formations of Sb(III) and Se(IV) with 3-amino-7-dimethylamino-2-methylphenazine hydrochloride (Neutral red, NRH(+)) in presence of pyrogallol and cetyltrimethylammonium bromide (CTAB) as both sensitivity enhancement and counter ion at pH 6.0. Under the optimized reagent conditions, the calibration curves were highly linear in the ranges of 8-300ngL(-1) and 12-250ngL(-1) (r(2)≥0.993) for Se(IV) and Sb(III), respectively. The limits of detection were 2.45 and 3.60ngL(-1) with sensitivity enhancement factors of 155 and 120, respectively. The recovery rate was higher than 96% with a relative standard deviation lower than 5.3% for five replicate measurements of 25, 75 and 150ngL(-1) Se(IV) and Sb(III), respectively. The method was validated by analysis of two certified reference materials (CRMs), and was successfully applied to the accurate and reliable speciation and determination of the contents of total Sb/Sb(III), and total Se/Se(IV) after UA-CPE of the pretreated sample matrices with and without pre-reduction with a mixture of l-cysteine and tartaric acid. Their Sb(V) and Se(VI) contents were calculated from the differences between total Sb and Sb(III) and/or total Se and Se(IV) levels. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Nanoindentation measurements of the mechanical properties of zirconium matrix and hydrides in unirradiated pre-hydrided nuclear fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Rico, A., E-mail: [DIMME, Departamento de Tecnología Mecánica, Universidad Rey Juan Carlos, c/Tulipán s/n, E-28933 Móstoles, Madrid (Spain); Martin-Rengel, M.A., E-mail: [Departamento de Ciencia de los Materiales, UPM, E.T.S.I. Caminos, Canales y Puertos, Profesor Aranguren SN, E-28040 Madrid (Spain); Ruiz-Hervias, J., E-mail: [Departamento de Ciencia de los Materiales, UPM, E.T.S.I. Caminos, Canales y Puertos, Profesor Aranguren SN, E-28040 Madrid (Spain); Rodriguez, J. [DIMME, Departamento de Tecnología Mecánica, Universidad Rey Juan Carlos, c/Tulipán s/n, E-28933 Móstoles, Madrid (Spain); Gomez-Sanchez, F.J., E-mail: [Advanced Material Simulation, S.L, Madrid (Spain)


    It is well known that the mechanical properties of the nuclear fuel cladding may be affected by the presence of hydrides. The average mechanical properties of hydrided cladding have been extensively investigated from a macroscopic point of view. In addition, the mechanical and fracture properties of bulk hydride samples fabricated from zirconium plates have also been reported. In this paper, Young’s modulus, hardness and yield stress are measured for each phase, namely zirconium hydrides and matrix, of pre-hydrided nuclear fuel cladding. To this end, nanoindentation tests were performed on ZIRLO samples in as-received state, on a hydride blister and in samples with 150 and 1200 ppm of hydrogen homogeneously distributed along the hoop direction of the cladding. The results show that the measured mechanical properties of the zirconium hydrides and ZIRLO matrix (Young’s modulus, hardness and yield stress) are rather similar. From the experimental data, the hydride volume fraction in the cladding samples with 150 and 1200 ppm was estimated and the average mechanical properties were calculated by means of the rule of mixtures. These values were compared with those obtained from ring compression tests. Good agreement between the results obtained by both methods was found.

  11. Metal hydrides used as negative electrode materials for Li-ion batteries (United States)

    Sartori, Sabrina; Cuevas, Fermin; Latroche, Michel


    Energy is a key issue for future generation. Researches are conducted worldwide to develop new efficient means for energy conversion and storage. Electrochemical storage is foreseen as an efficient way to handle intermittent renewable energy production. The most advanced batteries are nowadays based on lithium-ion technology though their specific capacities should be significantly increased to bring solution to mass storage. Conversion reactions are one way to step forward larger capacities at the anode. We here review the possibility to use metallic or complex hydrides as negative electrode using conversion reaction of hydride with lithium. Moreover, promising alloying of lithium with the metallic species might provide additional reversible capacities. Both binary and ternary systems are reviewed and results are compared in the frame of the electrochemical application.

  12. NATO Advanced Study Institute on Metal Hydrides

    CERN Document Server


    In the last five years, the study of metal hydrides has ex­ panded enormously due to the potential technological importance of this class of materials in hydrogen based energy conversion schemes. The scope of this activity has been worldwide among the industrially advanced nations. There has been a consensus among researchers in both fundamental and applied areas that a more basic understanding of the properties of metal/hydrogen syster;,s is required in order to provide a rational basis for the selection of materials for specific applications. The current worldwide need for and interest in research in metal hydrides indicated the timeliness of an Advanced Study Insti­ tute to provide an in-depth view of the field for those active in its various aspects. The inclusion of speakers from non-NATO coun­ tries provided the opportunity for cross-fertilization of ideas for future research. While the emphasis of the Institute was on basic properties, there was a conscious effort to stimulate interest in the applic...

  13. Hot temperatures line lists for metal hydrides (United States)

    Gorman, M.; Lodi, L.; Leyland, P. pC; Hill, C.; Yurchenko, S. N.; Tennyson, J.


    The ExoMol project is an ERC funded project set up with the purpose of calculating high quality theoretical molecular line list data to facilitate the emerging field of exoplanet and cool star atmospheric haracterisation [1]. Metal hydrides are important building blocks of interstellar physical chemistry. For molecular identification and characterisation in astrophysical sources, one requires accurate and complete spectroscopic data including transitional frequencies and intensities in the form of a line list. The ab initio methods offer the best opportunity for detailed theoretical studies of free diatomic metal hydrides and other simple hydride molecules. In this contribution we present progress on theoretical line lists for AlH, CrH, MgH, NiH, NaH and TiH obtained from first principles, applicable for a large range of temperatures up to 3500 K. Among the hydrides, AlH is of special interest because of a relatively high cosmic abundance of aluminium. The presence of AlH has been detected in the spectra of M-type and S-type stars as well as in sunspots (See [2] and references therein). CrH is a molecule of astrophysical interest; under the classification scheme developed by Kirkpatrick et al [3], CrH is of importance in distinguishing L type brown dwarfs. It has been proposed that theoretical line-lists of CrH and CrD could be used to facilitate a 'Deuterium test' for use in distinguishing planets, brown dwarfs and stars [5] and also it has been speculated that CrH exists in sunspots [4] but a higherquality hot-temperature line-list is needed to confirm this finding. The presence of MgH in stellar spectra is well documented through observation of the A2 ! X 2+ and B0 2+ ! X 2+ transitions. Different spectral features of MgH have been used as an indicator for the magnesium isotope abundances in the atmospheres of different stars from giants to dwarfs including the Sun, to measure the temperature of stars, surface gravity, stars' metal abundance, gravitational, as

  14. Crack growth through the thickness of thin-sheet Hydrided Zircaloy-4 (United States)

    Raynaud, Patrick A. C.

    In recent years, the limits on fuel burnup have been increased to allow an increase in the amount of energy produced by a nuclear fuel assembly thus reducing waste volume and allowing greater capacity factors. As a result, it is paramount to ensure safety after longer reactor exposure times in the case of design-basis accidents, such as reactivity-initiated accidents (RIA). Previously proposed failure criteria do not directly address the particular cladding failure mechanism during a RIA, in which crack initiation in brittle outer-layers is immediately followed by crack growth through the thickness of the thin-wall tubing. In such a case, the fracture toughness of hydrided thin-wall cladding material must be known for the conditions of through-thickness crack growth in order to predict the failure of high-burnup cladding. The fracture toughness of hydrided Zircaloy-4 in the form of thin-sheet has been examined for the condition of through-thickness crack growth as a function of hydride content and distribution at 25°C, 300°C, and 375°C. To achieve this goal, an experimental procedure was developed in which a linear hydride blister formed across the width of a four-point bend specimen was used to inject a sharp crack that was subsequently extended by fatigue pre-cracking. The electrical potential drop method was used to monitor the crack length during fracture toughness testing, thus allowing for correlation of the load-displacement record with the crack length. Elastic-plastic fracture mechanics were used to interpret the experimental test results in terms of fracture toughness, and J-R crack growth resistance curves were generated. Finite element modeling was performed to adapt the classic theories of fracture mechanics applicable to thick-plate specimens to the case of through-thickness crack growth in thin-sheet materials, and to account for non-uniform crack fronts. Finally, the hydride microstructure was characterized in the vicinity of the crack tip by

  15. Hydrogen storage in metal hydrides and complex hydrides; Wasserstoffspeicherung in Metall- und komplexen Hydriden - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bielmann, M.; Zuettel, A.


    This final report for the Swiss Federal Office of Energy (SFOE), reports on work done in 2007 at the Swiss Federal Laboratories for Materials Science and Technology EMPA on the storage of hydrogen in metal hydrides and complex hydrides. In particular, the use of tetrahydroborates is noted. The potential of this class of materials is stressed. The structures at room-temperature were examined using neutron and X-ray diffraction methods. Thermodynamic methods helped determine the thermodynamic stability of the materials. Also, a complete energy diagram for the materials was developed. The use of silicon oxide to reduce activation energy and its catalytic effects are discussed. The challenges placed by desorption mechanisms are noted. The authors note that reversibility is basically proven.

  16. Growth and decomposition of Lithium and Lithium hydride on Nickel

    DEFF Research Database (Denmark)

    Engbæk, Jakob; Nielsen, Gunver; Nielsen, Jane Hvolbæk


    In this paper we have investigated the deposition, structure and decomposition of lithium and lithium-hydride films on a nickel substrate. Using surface sensitive techniques it was possible to quantify the deposited Li amount, and to optimize the deposition procedure for synthesizing lithium......-hydride films. By only making thin films of LiH it is possible to study the stability of these hydride layers and compare it directly with the stability of pure Li without having any transport phenomena or adsorbed oxygen to obscure the results. The desorption of metallic lithium takes place at a lower...

  17. Technical and economic aspects of hydrogen storage in metal hydrides (United States)

    Schmitt, R.


    The recovery of hydrogen from such metal hydrides as LiH, MgH2, TiH2, CaH2 and FeTiH compounds is studied, with the aim of evaluating the viability of the technique for the storage of hydrogen fuel. The pressure-temperature dependence of the reactions, enthalpies of formation, the kinetics of the hydrogen absorption and desorption, and the mechanical and chemical stability of the metal hydrides are taken into account in the evaluation. Economic aspects are considered. Development of portable metal hydride hydrogen storage reservoirs is also mentioned.

  18. High Growth Rate Hydride Vapor Phase Epitaxy at Low Temperature through Use of Uncracked Hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Schulte, Kevin L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Simon, John D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ptak, Aaron J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Braun, Anna [Rose-Hulman Institute of Technology


    We demonstrate hydride vapor phase epitaxy (HVPE) of GaAs with unusually high growth rates (RG) at low temperature and atmospheric pressure by employing a hydride-enhanced growth mechanism. Under traditional HVPE growth conditions that involve growth from Asx species, RG exhibits a strong temperature dependence due to slow kinetics at the surface, and growth temperatures >750 degrees C are required to obtain RG > 60 um/h. We demonstrate that when the group V element reaches the surface in a hydride, the kinetic barrier is dramatically reduced and surface kinetics no longer limit RG. In this regime, RG is dependent on mass transport of uncracked AsH3 to the surface. By controlling the AsH3 velocity and temperature profile of the reactor, which both affect the degree of AsH3 decomposition, we demonstrate tuning of RG. We achieve RG above 60 um/h at temperatures as low as 560 degrees C and up to 110 um/h at 650 degrees C. We incorporate high-RG GaAs into solar cell devices to verify that the electronic quality does not deteriorate as RG is increased. The open circuit voltage (VOC), which is a strong function of non-radiative recombination in the bulk material, exhibits negligible variance in a series of devices grown at 650 degrees C with RG = 55-110 um/h. The implications of low temperature growth for the formation of complex heterostructure devices by HVPE are discussed.


    Energy Technology Data Exchange (ETDEWEB)

    Garrison, S.; Tamburello, D.; Hardy, B.; Anton, D.; Gorbounov, M.; Cognale, C.; van Hassel, B.; Mosher, D.


    Two detailed, unit-cell models, a transverse fin design and a longitudinal fin design, of a combined hydride bed and heat exchanger are developed in COMSOL{reg_sign} Multiphysics incorporating and accounting for heat transfer and reaction kinetic limitations. MatLab{reg_sign} scripts for autonomous model generation are developed and incorporated into (1) a grid-based and (2) a systematic optimization routine based on the Nelder-Mead downhill simplex method to determine the geometrical parameters that lead to the optimal structure for each fin design that maximizes the hydrogen stored within the hydride. The optimal designs for both the transverse and longitudinal fin designs point toward closely-spaced, small cooling fluid tubes. Under the hydrogen feed conditions studied (50 bar), a 25 times improvement or better in the hydrogen storage kinetics will be required to simultaneously meet the Department of Energy technical targets for gravimetric capacity and fill time. These models and methodology can be rapidly applied to other hydrogen storage materials, such as other metal hydrides or to cryoadsorbents, in future work.

  20. Ni/metal hydride secondary element (United States)

    Bauerlein, Peter


    A Ni/metal hydride secondary element having a positive nickel hydroxide electrode, a negative electrode having a hydrogen storage alloy, and an alkaline electrolyte, the positive electrode, provided with a three-dimensional metallic conductive structure, also contains an aluminum compound which is soluble in the electrolyte, in addition to nickel hydroxide and cobalt oxide. The aluminum compound is aluminum hydroxide and/or aluminum oxide, and the mass of the aluminum compound which is present in the positive bulk material mixture is 0.1 to 2% by weight relative to the mass of the nickel hydroxide which is present. In combination with aluminum hydroxide or aluminum oxide, the positive electrode further contains lanthanoid oxidic compounds Y.sub.2 O.sub.3, La.sub.2 O.sub.3 and Ca(OH).sub.2, as well as mixtures of these compounds.

  1. Hydrogen storage in sodium aluminum hydride.

    Energy Technology Data Exchange (ETDEWEB)

    Ozolins, Vidvuds; Herberg, J.L. (Lawrence Livermore National Laboratories, Livermore, CA); McCarty, Kevin F.; Maxwell, Robert S. (Lawrence Livermore National Laboratories, Livermore, CA); Stumpf, Roland Rudolph; Majzoub, Eric H.


    Sodium aluminum hydride, NaAlH{sub 4}, has been studied for use as a hydrogen storage material. The effect of Ti, as a few mol. % dopant in the system to increase kinetics of hydrogen sorption, is studied with respect to changes in lattice structure of the crystal. No Ti substitution is found in the crystal lattice. Electronic structure calculations indicate that the NaAlH{sub 4} and Na{sub 3}AlH{sub 6} structures are complex-ionic hydrides with Na{sup +} cations and AlH{sub 4}{sup -} and AlH{sub 6}{sup 3-} anions, respectively. Compound formation studies indicate the primary Ti-compound formed when doping the material at 33 at. % is TiAl{sub 3} , and likely Ti-Al compounds at lower doping rates. A general study of sorption kinetics of NaAlH{sub 4}, when doped with a variety of Ti-halide compounds, indicates a uniform response with the kinetics similar for all dopants. NMR multiple quantum studies of solution-doped samples indicate solvent interaction with the doped alanate. Raman spectroscopy was used to study the lattice dynamics of NaAlH{sub 4}, and illustrated the molecular ionic nature of the lattice as a separation of vibrational modes between the AlH{sub 4}{sup -} anion-modes and lattice-modes. In-situ Raman measurements indicate a stable AlH{sub 4}{sup -} anion that is stable at the melting temperature of NaAlH{sub 4}, indicating that Ti-dopants must affect the Al-H bond strength.

  2. Precipitation of hydrides in high purity niobium after different treatments

    Energy Technology Data Exchange (ETDEWEB)

    Barkov, F.; Romanenko, A.; Trenikhina, Y.; Grassellino, A.


    Precipitation of lossy non-superconducting niobium hydrides represents a known problem for high purity niobium in superconducting applications. Using cryogenic optical and laser confocal scanning microscopy we have directly observed surface precipitation and evolution of niobium hydrides in samples after different treatments used for superconducting RF cavities for particle acceleration. Precipitation is shown to occur throughout the sample volume, and the growth of hydrides is well described by the fast diffusion-controlled process in which almost all hydrogen is precipitated at $T=140$~K within $\\sim30$~min. 120$^{\\circ}$C baking and mechanical deformation are found to affect hydride precipitation through their influence on the number of nucleation and trapping centers.

  3. Review of magnesium hydride-based materials: development and optimisation

    NARCIS (Netherlands)

    Crivello, J. -C.; Dam, B.; Denys, R. V.; Dornheim, M.; Grant, D. M.; Huot, J.; Jensen, T. R.; de Jongh, P.; Latroche, M.; Milanese, C.; Milcius, D.; Walker, G. S.; Webb, C. J.; Zlotea, C.; Yartys, V. A.

    Magnesium hydride has been studied extensively for applications as a hydrogen storage material owing to the favourable cost and high gravimetric and volumetric hydrogen densities. However, its high enthalpy of decomposition necessitates high working temperatures for hydrogen desorption while the


    Directory of Open Access Journals (Sweden)

    Yu. Kluchka


    Full Text Available Experimental dependence of the pressure of hydrogen in the hydride cartridge when it is heated is obtained. Experimental data prove the theoretical values with an accuracy of ≈ 6%.

  5. Models for Metal Hydride Particle Shape, Packing, and Heat Transfer


    Smith, Kyle C.; Fisher, Timothy S.


    A multiphysics modeling approach for heat conduction in metal hydride powders is presented, including particle shape distribution, size distribution, granular packing structure, and effective thermal conductivity. A statistical geometric model is presented that replicates features of particle size and shape distributions observed experimentally that result from cyclic hydride decrepitation. The quasi-static dense packing of a sample set of these particles is simulated via energy-based structu...

  6. An approach to quantum chemical consideration of "hydride" transfer reactions

    Directory of Open Access Journals (Sweden)



    Full Text Available An approach to the quantum chemical study of "hydride ion" transfer has been proposed, according to which the sequences of changes in ionization potentials, enthalpies and free energies of the affinities to the hydride ion, to the hydrogen atom and to the proton of substrates molecules and their derivatives (cations, radicals, anions, are compared with the experimentally substantiated series of "hydride" mobility. It has been established that the experimental series of "hydride" mobility for six chalcogenopyrans based on "semicyclic" 1,5-diketones is in conformity with the computed ionization potentials of the molecules, and with the affinity of the corresponding radicals to the hydrogen atom involved in the transfer. The direct splitting-out of the hydride ion and the primary deprotonation of the substrates followed by the withdrawal of two electrons was elucidated to be unlikely. Feasible are the mechanisms of "hydride" mobility, the first step of which consists of electron or hydrogen atom transfer from the chalcogenopyrans molecules.

  7. Chemical Hydride Slurry for Hydrogen Production and Storage

    Energy Technology Data Exchange (ETDEWEB)

    McClaine, Andrew W


    The purpose of this project was to investigate and evaluate the attractiveness of using a magnesium chemical hydride slurry as a hydrogen storage, delivery, and production medium for automobiles. To fully evaluate the potential for magnesium hydride slurry to act as a carrier of hydrogen, potential slurry compositions, potential hydrogen release techniques, and the processes (and their costs) that will be used to recycle the byproducts back to a high hydrogen content slurry were evaluated. A 75% MgH2 slurry was demonstrated, which was just short of the 76% goal. This slurry is pumpable and storable for months at a time at room temperature and pressure conditions and it has the consistency of paint. Two techniques were demonstrated for reacting the slurry with water to release hydrogen. The first technique was a continuous mixing process that was tested for several hours at a time and demonstrated operation without external heat addition. Further work will be required to reduce this design to a reliable, robust system. The second technique was a semi-continuous process. It was demonstrated on a 2 kWh scale. This system operated continuously and reliably for hours at a time, including starts and stops. This process could be readily reduced to practice for commercial applications. The processes and costs associated with recycling the byproducts of the water/slurry reaction were also evaluated. This included recovering and recycling the oils of the slurry, reforming the magnesium hydroxide and magnesium oxide byproduct to magnesium metal, hydriding the magnesium metal with hydrogen to form magnesium hydride, and preparing the slurry. We found that the SOM process, under development by Boston University, offers the lowest cost alternative for producing and recycling the slurry. Using the H2A framework, a total cost of production, delivery, and distribution of $4.50/kg of hydrogen delivered or $4.50/gge was determined. Experiments performed at Boston

  8. Feasibility study for the recycling of nickel metal hydride electric vehicle batteries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sabatini, J.C.; Field, E.L.; Wu, I.C.; Cox, M.R.; Barnett, B.M.; Coleman, J.T. [Little (Arthur D.), Inc., Cambridge, MA (United States)


    This feasibility study examined three possible recycling processes for two compositions (AB{sub 2} and AB{sub 5}) of nickel metal hydride electric vehicle batteries to determine possible rotes for recovering battery materials. Analysts examined the processes, estimated the costs for capital equipment and operation, and estimated the value of the reclaimed material. They examined the following three processes: (1) a chemical process that leached battery powders using hydrochloric acid, (2) a pyrometallurical process, and (3) a physical separation/chemical process. The economic analysis revealed that the physical separation/chemical process generated the most revenue.

  9. Structural phase stability in fluorinated calcium hydride (United States)

    Varunaa, R.; Ravindran, P.


    In order to improve the hydrogen storage properties of calcium hydride (CaH2), we have tuned its thermodynamical properties through fluorination. Using ab-initio total energy calculations based on density functional theory, the structural stability, electronic structure and chemical bonding of CaH2-xFx systems are investigated. The phase transition of fluorinated systems from orthorhombic to cubic structure has been observed at 18% fluorine doped CaH2. The phase stability analysis shows that CaH2-xFx systems are highly stable and the stability is directly correlating with their ionicity. Density of states (DOS) plot reveals that CaH2-xFx systems are insulators. Partial DOS and charge density analyses conclude that these systems are governed by ionic bonding. Our results show that H closer to F can be removed more easily than that far away from F and this is due to disproportionation induced in the bonding interaction by fluorination.

  10. Studies on hydriding kinetics of some La-based metal hydride alloys

    Energy Technology Data Exchange (ETDEWEB)

    Muthukumar, P.; Satheesh, A.; Groll, M. [Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039 (India); Linder, M.; Mertz, R. [Institute of Nuclear Technology and Energy Systems (IKE), University of Stuttgart (Germany)


    In this paper, the hydriding kinetics of LaNi{sub 5}, LaNi{sub 4.7}Al{sub 0.3} and LmNi{sub 4.91}Sn{sub 0.15} is presented. Experiments were carried out by maintaining the pressure ratio (supply pressure to equilibrium pressure at the mid-point of the pressure-concentration-isotherm) equal to 2 and by maintaining nearly isothermal reaction conditions. Two widely used reaction kinetics models, namely Johnson-Mehl-Avrami (JMA) model and Jander diffusion model (JDM) are considered for the analysis. Two JMA models are considered; in the first model, the order of the reaction is assumed as unit and in the second model, the rate constant is calculated by estimating the order by fitting the reaction kinetics data with a reaction kinetics equation. The activation energy and pre-exponential constants of the above-mentioned alloys are estimated by constructing the Arrhenius plot. Activation energies estimated from the different models are compared and the accurate values of activation energy for the different alloys are determined by comparing the reaction kinetics data obtained from the models with the experimental data. The rate-controlling step of the hydriding reaction is obtained for all the alloys investigated. (author)

  11. Micro-scale fracture experiments on zirconium hydrides and phase boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Chan, H., E-mail:; Roberts, S.G.; Gong, J.


    Fracture properties of micro-scale zirconium hydrides and phase boundaries were studied using microcantilever testing methods. FIB-machined microcantilevers were milled on cross-sectional surfaces of hydrided samples, with the most highly-stressed regions within the δ-hydride film, within the α-Zr or along the Zr-hydride interface. Cantilevers were notched using the FIB and then tested in bending using a nanoindenter. Load-displacement results show that three types of cantilevers have distinct deformation properties. Zr cantilevers deformed plastically. Hydride cantilevers fractured after a small amount of plastic flow; the fracture toughness of the δ-hydride was found to be 3.3 ± 0.4 MPam{sup 1/2} and SEM examination showed transgranular cleavage on the fracture surfaces. Cantilevers notched at the Zr-hydride interface developed interfacial voids during loading, at loads considerably lower than that which initiate brittle fracture of hydrides.

  12. Hydrogen storage as a hydride. Citations from the International Aerospace Abstracts data base (United States)

    Zollars, G. F.


    These citations from the international literature concern the storage of hydrogen in various metal hydrides. Binary and intermetallic hydrides are considered. Specific alloys discussed are iron titanium, lanthanium nickel, magnesium copper and magnesium nickel among others.

  13. Study on the Use of Hydride Fuel in High-Performance Light Water Reactor Concept


    Haileyesus Tsige-Tamirat; Luca Ammirabile


    Hydride fuels have features which could make their use attractive in future advanced power reactors. The potential benefit of use of hydride fuel in HPLWR without introducing significant modification in the current core design concept of the high-performance light water reactor (HPLWR) has been evaluated. Neutronics and thermal hydraulic analyses were performed for a single assembly model of HPLWR with oxide and hydride fuels. The hydride assembly shows higher moderation with softer neutron s...

  14. A study of advanced magnesium-based hydride and development of a metal hydride thermal battery system (United States)

    Zhou, Chengshang

    Metal hydrides are a group of important materials known as energy carriers for renewable energy and thermal energy storage. A concept of thermal battery based on advanced metal hydrides is studied for heating and cooling of cabins in electric vehicles. The system utilizes a pair of thermodynamically matched metal hydrides as energy storage media. The hot hydride that is identified and developed is catalyzed MgH2 due to its high energy density and enhanced kinetics. TiV0.62Mn1.5, TiMn2, and LaNi5 alloys are selected as the matching cold hydride. A systematic experimental survey is carried out in this study to compare a wide range of additives including transitions metals, transition metal oxides, hydrides, intermetallic compounds, and carbon materials, with respect to their effects on dehydrogenation properties of MgH2. The results show that additives such as Ti and V-based metals, hydride, and certain intermetallic compounds have strong catalytic effects. Solid solution alloys of magnesium are exploited as a way to destabilize magnesium hydride thermodynamically. Various elements are alloyed with magnesium to form solid solutions, including indium and aluminum. Thermodynamic properties of the reactions between the magnesium solid solution alloys and hydrogen are investigated, showing that all the solid solution alloys that are investigated in this work have higher equilibrium hydrogen pressures than that of pure magnesium. Cyclic stability of catalyzed MgH2 is characterized and analyzed using a PCT Sievert-type apparatus. Three systems, including MgH2-TiH 2, MgH2-TiMn2, and MgH2-VTiCr, are examined. The hydrogenating and dehydrogenating kinetics at 300°C are stable after 100 cycles. However, the low temperature (25°C to 150°C) hydrogenation kinetics suffer a severe degradation during hydrogen cycling. Further experiments confirm that the low temperature kinetic degradation can be mainly related the extended hydrogenation-dehydrogenation reactions. Proof

  15. Comparison of Hydrogen Elimination from Molecular Zinc and Magnesium Hydride Clusters

    NARCIS (Netherlands)

    Intemann, J.; Sirsch, Peter; Harder, Sjoerd


    In analogy to the previously reported tetranuclear magnesium hydride cluster with a bridged dianionic bis-beta-diketiminate ligand, a related zinc hydride cluster has been prepared. The crystal structures of these magnesium and zinc hydride complexes are similar: the metal atoms are situated at the

  16. Use of triammonium salt of aurin tricarboxylic acid as risk mitigant for aluminum hydride

    Energy Technology Data Exchange (ETDEWEB)

    Cortes-Concepcion, Jose A.; Anton, Donald L.


    A process and a resulting product by process of an aluminum hydride which is modified with by physically combining in a ball milling process an aluminum hydride with a triammonium salt of aurin tricarboxylic acid. The resulting product is an aluminum hydride which is resistant to air, ambient moisture, and liquid water while maintaining useful hydrogen storage and release kinetics.

  17. Kinetic and structural aspects of tantalum hydride formation

    Directory of Open Access Journals (Sweden)



    Full Text Available Tantalum hydrides of various composition were synthesized by equilibrating tantalum with hydrogen at six different temperatures from 573 to 823 K, under a constant hydrogen pressure of 1 bar. Both the exact Ta/H mole ratios and the kinetic parameters of hydriding were determined on the basis of the dependence of the H/Ta mole ratio on time. The influence of stoichiometry on the appearance of X-ray powder diffractograms at room temperature was studied. As a consequence of hydriding, for ratios H/Ta > 0.2, the original bcc Ta-lattice undergoes distortion, manifesting itself as both a shift and a splitting of the X-ray patterns in the X-ray diffractograms. For samples with H/Ta < 0.2, the appearance of some superstructure reflections at low Bragg angles was noted, which suggests a long range ordering of hydrogen with orthorhombic symmetry.

  18. Investigation of metal hydride nanoparticles templated in metal organic frameworks.

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Benjamin W.; Herberg, Julie L. (Lawrence Livermore National Laboratory, Livermore, CA); Highley, Aaron M.; Grossman, Jeffrey (MIT, Cambridge, MA); Wagner, Lucas (MIT, Cambridge, MA); Bhakta, Raghu; Peaslee, D. (University of Missouri, St. Louis, MO); Allendorf, Mark D.; Liu, X. (University of Missouri, St. Louis, MO); Behrens, Richard, Jr.; Majzoub, Eric H. (University of Missouri, St. Louis, MO)


    Hydrogen is proposed as an ideal carrier for storage, transport, and conversion of energy. However, its storage is a key problem in the development of hydrogen economy. Metal hydrides hold promise in effectively storing hydrogen. For this reason, metal hydrides have been the focus of intensive research. The chemical bonds in light metal hydrides are predominantly covalent, polar covalent or ionic. These bonds are often strong, resulting in high thermodynamic stability and low equilibrium hydrogen pressures. In addition, the directionality of the covalent/ionic bonds in these systems leads to large activation barriers for atomic motion, resulting in slow hydrogen sorption kinetics and limited reversibility. One method for enhancing reaction kinetics is to reduce the size of the metal hydrides to nano scale. This method exploits the short diffusion distances and constrained environment that exist in nanoscale hydride materials. In order to reduce the particle size of metal hydrides, mechanical ball milling is widely used. However, microscopic mechanisms responsible for the changes in kinetics resulting from ball milling are still being investigated. The objective of this work is to use metal organic frameworks (MOFs) as templates for the synthesis of nano-scale NaAlH4 particles, to measure the H2 desorption kinetics and thermodynamics, and to determine quantitative differences from corresponding bulk properties. Metal-organic frameworks (MOFs) offer an attractive alternative to traditional scaffolds because their ordered crystalline lattice provides a highly controlled and understandable environment. The present work demonstrates that MOFs are stable hosts for metal hydrides and their reactive precursors and that they can be used as templates to form metal hydride nanoclusters on the scale of their pores (1-2 nm). We find that using the MOF HKUST-1 as template, NaAlH4 nanoclusters as small as 8 formula units can be synthesized inside the pores. A detailed picture of

  19. High-Spin Cobalt Hydrides for Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Patrick L. [Univ. of Rochester, NY (United States)


    Organometallic chemists have traditionally used catalysts with strong-field ligands that give low-spin complexes. However, complexes with a weak ligand field have weaker bonds and lower barriers to geometric changes, suggesting that they may lead to more rapid catalytic reactions. Developing our understanding of high-spin complexes requires the use of a broader range of spectroscopic techniques, but has the promise of changing the mechanism and/or selectivity of known catalytic reactions. These changes may enable the more efficient utilization of chemical resources. A special advantage of cobalt and iron catalysts is that the metals are more abundant and cheaper than those currently used for major industrial processes that convert unsaturated organic molecules and biofeedstocks into useful chemicals. This project specifically evaluated the potential of high-spin cobalt complexes for small-molecule reactions for bond rearrangement and cleavage reactions relevant to hydrocarbon transformations. We have learned that many of these reactions proceed through crossing to different spin states: for example, high-spin complexes can flip one electron spin to access a lower-energy reaction pathway for beta-hydride elimination. This reaction enables new, selective olefin isomerization catalysis. The high-spin cobalt complexes also cleave the C-O bond of CO2 and the C-F bonds of fluoroarenes. In each case, the detailed mechanism of the reaction has been determined. Importantly, we have discovered that the cobalt catalysts described here give distinctive selectivities that are better than known catalysts. These selectivities come from a synergy between supporting ligand design and electronic control of the spin-state crossing in the reactions.

  20. Research on secondary hydriding for advanced nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y. S.; Kim, S. K. et al. [Hanyang Univ, Seoul (Korea)


    First, hydriding kinetics of zirconium alloys are derived as follows: Zircaloy-2 : 1.1X10{sup 7} exp(-20,800/RT), Zircaloy-4 : 6.9X10{sup 7} exp(-23,800/RT), ZIRLO{sup TM} : 1.5X10{sup 6} exp(-18,000/RT) and it is found that it is a linear kinetics. Second, H{sub 2}/H{sub 2}O-ratio-controlling experiments are performed as a function of the ratios, 10{sup 7}, 10{sup 5}. and 10{sup 3} in order to examine the oxidation enhancement under the competing environment of oxidation and hydriding. The results show that under the mixture environment hydriding reaction takes place initially, then reaction turn into oxidation with the growing oxide, and finally turn back into hydriding reaction because of oxide breakage. It is confirmed that the oxidation in the second stage is greatly enhanced due to hydride precipitation. Third, micro-structural analysis is carried out by using SEM/TEM to see the roles of the oxide in the massive hydriding process. It turns out that micro-structural changes of the oxide takes place at the beginning of the massive hydriding. Fourth experiments are carried out both in the pre-transition (at 370 deg C for 72 hours) and in the post-transition regime (at 700 deg C for 210 minutes) to see the pressure effects on the oxidation kinetics. Through this investigation, it is revealed that under 15MPa steam pressure the oxidation is enhanced by 50% in the pre-transition and by 150% in the post-transition regime, respectively. Last, the two stage diffusion FGR model originated from FRAPCON-III code is successfully transplanted in the FEMAXI-IV code and thoroughly reviewed and compared with single stage diffusion FGR model with grain boundary saturation of the FEMAXI-IV code. According to the benchmarking of the computation results against the high burn-up in-pile data it turns out that both predict quite well though the single stage diffusion FGR model somewhat underestimates the release rate. These results will be able to be applicable for the

  1. Metal hydride heat pump engineering demonstration and evaluation model (United States)

    Lynch, Franklin E.


    Future generations of portable life support systems (PLSS's) for space suites (extravehicular mobility units or EMU's) may require regenerable nonventing thermal sinks (RNTS's). For purposes of mobility, a PLSS must be as light and compact as possible. Previous venting PLSS's have employed water sublimators to reject metabolic and equipment heat from EMU's. It is desirable for long-duration future space missions to minimize the use of water and other consumables that need to be periodically resupplied. The emission of water vapor also interferes with some types of instrumentation that might be used in future space exploration. The test article is a type of RNTS based on a metal hydride heat pump (MHHP). The task of reservicing EMU's after use must be made less demanding in terms of time, procedures, and equipment. The capability for quick turnaround post-EVA servicing (30 minutes) is a challenging requirement for many of the RNTS options. The MHHP is a very simple option that can be regenerated in the airlock within the 30 minute limit by the application of a heating source and a cooling sink. In addition, advanced PLSS's must provide a greater degree of automatic control, relieving astronauts of the need to manually adjust temperatures in their liquid cooled ventilation garments (LCVG's). The MHHP includes automatic coolant controls with the ability to follow thermal load swings from minimum to maximum in seconds. The MHHP includes a coolant loop subsystem with pump and controls, regeneration equipment for post-EVA servicing, and a PC-based data acquisition and control system (DACS).

  2. Matrix reactivity of AlF and AlCl in the presence of HCl and HBr: generation and characterization of the new Al(III) hydrides HAlFCl, HAlFBr, and HAlClBr and the monomeric mixed Al(III) halides AlX(2)Y (X, Y = F, Cl, or Br). (United States)

    Himmel, Hans-Jörg; Bahlo, Jan; Haussmann, Michael; Kurth, Fabian; Stösser, Gregor; Schnöckel, Hansgeorg


    The spontaneous and photolytically induced reactions of AlF and AlCl in the presence of HCl and HBr in solid argon matrices were followed and the products identified and characterized by means of IR spectroscopy. Quantum mechanical calculations allow for a further evaluation of the properties of the reaction products. These are the adducts AlF.HCl, AlF.HBr, and AlCl.HBr, representing the products of spontaneous reactions, and the trivalent Al(III) hydrides HAlFCl, HAlFBr, and HAlClBr, which were formed upon photoactivation of these complexes. All three hydrides are planar molecules (C(s)() symmetry) with bond angles in agreement with the predictions of the VSEPR theory. In addition, the mixed halides AlFCl(2), AlFBr(2), and AlClBr(2) were formed upon photolysis. The bisadducts AlF.(HCl)(2) and AlF.(HBr)(2) are likely to be the precursors to these species.

  3. Monitoring and control of a hydrogen production and storage system consisting of water electrolysis and metal hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Herranz, V.; Perez-Page, M. [Departamento de Ingenieria Quimica y Nuclear. Universidad Politecnica de Valencia. Camino de Vera S/N, 46022 Valencia (Spain); Beneito, R. [Area de Energia. Departamento de Gestion e Innovacion. Instituto Tecnologico del Juguete (AIJU). Avda. Industria 23, 03440 Ibi, Alicante (Spain)


    Renewable energy sources such as wind turbines and solar photovoltaic are energy sources that cannot generate continuous electric power. The seasonal storage of solar or wind energy in the form of hydrogen can provide the basis for a completely renewable energy system. In this way, water electrolysis is a convenient method for converting electrical energy into a chemical form. The power required for hydrogen generation can be supplied through a photovoltaic array. Hydrogen can be stored as metal hydrides and can be converted back into electricity using a fuel cell. The elements of these systems, i.e. the photovoltaic array, electrolyzer, fuel cell and hydrogen storage system in the form of metal hydrides, need a control and monitoring system for optimal operation. This work has been performed within a Research and Development contract on Hydrogen Production granted by Solar Iniciativas Tecnologicas, S.L. (SITEC), to the Politechnic University of Valencia and to the AIJU, and deals with the development of a system to control and monitor the operation parameters of an electrolyzer and a metal hydride storage system that allow to get a continuous production of hydrogen. (author)

  4. Structural changes in a catalyst based on the intermetallide hydride ZrNiH/sub 2. 8/ on activation

    Energy Technology Data Exchange (ETDEWEB)

    Rudnitskii, L.A.; Soboleva, T.N.; Bondartsova, I.I.; Dubyaga, N.A.; Mazus, E.I.; Lunin, V.V.; Alekseev, A.M.


    A combination of thermogravimetric and x-ray diffraction analysis was used to study structural changes in the intermetallic hydride catalyst during its activation. Changes in the thickness of the hydride pellets were assessed by dilatometry. The activation of the hydride included oxidative and reductive stages. The activation process led to profound changes in the phase composition and structure of the hydride.

  5. Quantifying the stress fields due to a delta-hydride precipitate in alpha-Zr matrix

    Energy Technology Data Exchange (ETDEWEB)

    Tummala, Hareesh [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Capolungo, Laurent [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tome, Carlos N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    This report is a preliminary study on δ-hydride precipitate in zirconium alloy performed using 3D discrete dislocation dynamics simulations. The ability of dislocations in modifying the largely anisotropic stress fields developed by the hydride particle in a matrix phase is addressed for a specific dimension of the hydride. The influential role of probable dislocation nucleation at the hydride-matrix interface is reported. Dislocation nucleation around a hydride was found to decrease the shear stress (S13) and also increase the normal stresses inside the hydride. We derive conclusions on the formation of stacks of hydrides in zirconium alloys. The contribution of mechanical fields due to dislocations was found to have a non-negligible effect on such process.

  6. Hydrogen Storage in Porous Materials and Magnesium Hydrides

    NARCIS (Netherlands)

    Grzech, A.


    In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen

  7. Well-defined transition metal hydrides in catalytic isomerizations. (United States)

    Larionov, Evgeny; Li, Houhua; Mazet, Clément


    This Feature Article intends to provide an overview of a variety of catalytic isomerization reactions that have been performed using well-defined transition metal hydride precatalysts. A particular emphasis is placed on the underlying mechanistic features of the transformations discussed. These have been categorized depending upon the nature of the substrate and in most cases discussed following a chronological order.

  8. New Orbital Hybridization Schemes for Metal Hydrides-Keeping p ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 8. New Orbital Hybridization Schemes for Metal Hydrides - Keeping p Orbitals out of the Picture. J Chandrasekhar. Research News Volume 1 Issue 8 August 1996 pp 82-85 ...

  9. The Properties of Some Simple Covalent Hydrides: An Ab Initio ...

    African Journals Online (AJOL)

    Some properties of the monomeric binary hydrides of the elements of the first two rows of the periodic table have been determined using ab initio molecular orbital theory. The properties in question are the energetic, structural, electronic, topological and vibrational characteristics. In general, a gradual convergence towards ...

  10. Metal Hydride assited contamination on Ru/Si surfaces

    NARCIS (Netherlands)

    Pachecka, Malgorzata; Lee, Christopher James; Sturm, Jacobus Marinus; Bijkerk, Frederik


    In extreme ultraviolet lithography (EUVL) residual tin, in the form of particles, ions, and atoms, can be deposited on nearby EUV optics. During the EUV pulse, a reactive hydrogen plasma is formed, which may be able to react with metal contaminants, creating volatile and unstable metal hydrides that

  11. Pore confined synthesis of magnesium boron hydride nanoparticles

    NARCIS (Netherlands)

    Au, Yuen S.; Yan, Yigang; De Jong, Krijn P.; Remhof, Arndt; De Jongh, Petra E.


    Nanostructured materials based on light elements such as Li, Mg, and Na are essential for energy storage and conversion applications, but often difficult to prepare with control over size and structure. We report a new strategy that is illustrated for the formation of magnesium boron hydrides,

  12. Hydrogen Storage in Porous Materials and Magnesium Hydrides

    NARCIS (Netherlands)

    Mulder, F.M.; Grzech, A.

    In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen

  13. Activation and discharge kinetics of metal hydride electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, Stein Egil


    Potential step chronoamperometry and Electrochemical Impedance Spectroscopy (eis) measurements were performed on single metal hydride particles. For the {alpha}-phase, the bulk diffusion coefficient and the absorption/adsorption rate parameters were determined. Materials produced by atomisation, melt spinning and conventional casting were investigated. The melt spun and conventional cast materials were identical and the atomised material similar in composition. The particles from the cast and the melt spun material were shaped like parallelepipeds. A corresponding equation, for this geometry, for diffusion coupled to an absorption/adsorption reaction was developed. It was found that materials produced by melt spinning exhibited lower bulk diffusion (1.7E-14 m2/s) and absorption/adsorption reaction rate (1.0E-8 m/s), compared to materials produced by conventionally casting (1.1E-13 m2/s and 5.5E-8 m/s respectively). In addition, the influence of particle active surface and relative diffusion length were discussed. It was concluded that there are uncertainties connected to these properties, which may explain the large distribution in the kinetic parameters measured on metal hydride particles. Activation of metal hydride forming materials has been studied and an activation procedure, for porous electrodes, was investigated. Cathodic polarisation of the electrode during a hot alkaline surface treatment gave the maximum discharge capacity on the first discharge of the electrode. The studied materials were produced by gas atomisation and the spherical shape was retained during the activation. Both an AB{sub 5} and an AB{sub 2} alloy was successfully activated and discharge rate properties determined. The AB{sub 2} material showed a higher maximum discharge capacity, but poor rate properties, compared to the AB{sub 5} material. Reduction of surface oxides, and at the same time protection against corrosion of active metallic nickel, can explain the satisfying results of

  14. Synthesis of hydrides by interaction of intermetallic compounds with ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Tarasov, Boris P., E-mail: [Institute of Problems of Chemical Physics of the Russian Academy of Sciences, Chernogolovka 142432 (Russian Federation); Fokin, Valentin N.; Fokina, Evelina E. [Institute of Problems of Chemical Physics of the Russian Academy of Sciences, Chernogolovka 142432 (Russian Federation); Yartys, Volodymyr A., E-mail: [Institute for Energy Technology, Kjeller NO 2027 (Norway); Department of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim NO 7491 (Norway)


    Highlights: • Interaction of the intermetallics A{sub 2}B, AB, AB{sub 2}, AB{sub 5} and A{sub 2}B{sub 17} with NH{sub 3} was studied. • The mechanism of interaction of the alloys with ammonia is temperature-dependent. • Hydrides, hydridonitrides, disproportionation products or metal–N–H compounds are formed. • NH{sub 4}Cl was used as an activator of the reaction between ammonia and intermetallics. • Interaction with ammonia results in the synthesis of the nanopowders. - Abstract: Interaction of intermetallic compounds with ammonia was studied as a processing route to synthesize hydrides and hydridonitrides of intermetallic compounds having various stoichiometries and types of crystal structures, including A{sub 2}B, AB, AB{sub 2}, AB{sub 5} and A{sub 2}B{sub 17} (A = Mg, Ti, Zr, Sc, Nd, Sm; B = transition metals, including Fe, Co, Ni, Ti and nontransition elements, Al and B). In presence of NH{sub 4}Cl used as an activator of the reaction between ammonia and intermetallic alloys, their interaction proceeds at rather mild P–T conditions, at temperatures 100–200 °C and at pressures of 0.6–0.8 MPa. The mechanism of interaction of the alloys with ammonia appears to be temperature-dependent and, following a rise of the interaction temperature, it leads to the formation of interstitial hydrides; interstitial hydridonitrides; disproportionation products (binary hydride; new intermetallic hydrides and binary nitrides) or new metal–nitrogen–hydrogen compounds like magnesium amide Mg(NH{sub 2}){sub 2}. The interaction results in the synthesis of the nanopowders where hydrogen and nitrogen atoms become incorporated into the crystal lattices of the intermetallic alloys. The nitrogenated materials have the smallest particle size, down to 40 nm, and a specific surface area close to 20 m{sup 2}/g.

  15. Metal hydride hydrogen and heat storage systems as enabling technology for spacecraft applications

    Energy Technology Data Exchange (ETDEWEB)

    Reissner, Alexander, E-mail: [FOTEC Forschungs- und Technologietransfer GmbH, Viktor Kaplan Straße 2, 2700 Wiener Neustadt (Austria); University of Applied Sciences Wiener Neustadt, Johannes Gutenberg-Straße 3, 2700 Wiener Neustadt (Austria); Pawelke, Roland H.; Hummel, Stefan; Cabelka, Dusan [FOTEC Forschungs- und Technologietransfer GmbH, Viktor Kaplan Straße 2, 2700 Wiener Neustadt (Austria); Gerger, Joachim [University of Applied Sciences Wiener Neustadt, Johannes Gutenberg-Straße 3, 2700 Wiener Neustadt (Austria); Farnes, Jarle, E-mail: [CMR Prototech AS, Fantoftvegen 38, PO Box 6034, 5892 Bergen (Norway); Vik, Arild; Wernhus, Ivar; Svendsen, Tjalve [CMR Prototech AS, Fantoftvegen 38, PO Box 6034, 5892 Bergen (Norway); Schautz, Max, E-mail: [European Space Agency, ESTEC – Keplerlaan 1, 2201 AZ Noordwijk Zh (Netherlands); Geneste, Xavier, E-mail: [European Space Agency, ESTEC – Keplerlaan 1, 2201 AZ Noordwijk Zh (Netherlands)


    Highlights: • A metal hydride tank concept for heat and hydrogen storage is presented. • The tank is part of a closed-loop reversible fuel cell system for space application. • For several engineering issues specific to the spacecraft application, solutions have been developed. • The effect of water contamination has been approximated for Ti-doped NaAlH{sub 4}. • A novel heat exchanger design has been realized by Selective Laser Melting. - Abstract: The next generation of telecommunication satellites will demand a platform payload performance in the range of 30+ kW within the next 10 years. At this high power output, a Regenerative Fuel Cell Systems (RFCS) offers an efficiency advantage in specific energy density over lithium ion batteries. However, a RFCS creates a substantial amount of heat (60–70 kJ per mol H{sub 2}) during fuel cell operation. This requires a thermal hardware that accounts for up to 50% of RFCS mass budget. Thus the initial advantage in specific energy density is reduced. A metal hydride tank for combined storage of heat and hydrogen in a RFCS may overcome this constraint. Being part of a consortium in an ongoing European Space Agency project, FOTEC is building a technology demonstrator for such a combined hydrogen and heat storage system.

  16. Operation of metal hydride hydrogen storage systems for hydrogen compression using solar thermal energy

    Directory of Open Access Journals (Sweden)

    Naruki Endo


    Full Text Available By using a newly constructed bench-scale hydrogen energy system with renewable energy, ‘Pure Hydrogen Energy System’, the present study demonstrates the operations of a metal hydride (MH tank for hydrogen compression as implemented through the use solar thermal energy. Solar thermal energy is used to generate hot water as a heat source of the MH tank. Thus, 70 kg of LaNi5, one of the most typical alloys used for hydrogen storage, was placed in the MH tank. We present low and high hydrogen flow rate operations. Then, the operations under winter conditions are discussed along with numerical simulations conducted from the thermal point of view. Results show that a large amount of heat (>100 MJ is generated and the MH hydrogen compression is available.

  17. Storage, generation, and use of hydrogen (United States)

    McClaine, Andrew W.; Rolfe, Jonathan L.; Larsen, Christopher A.; Konduri, Ravi K.


    A composition comprising a carrier liquid; a dispersant; and a chemical hydride. The composition can be used in a hydrogen generator to generate hydrogen for use, e.g., as a fuel. A regenerator recovers elemental metal from byproducts of the hydrogen generation process.

  18. Composite Materials for Hazard Mitigation of Reactive Metal Hydrides.

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, Joseph William [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Cordaro, Joseph Gabriel [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sartor, George B. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dedrick, Daniel E. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reeder, Craig L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)


    In an attempt to mitigate the hazards associated with storing large quantities of reactive metal hydrides, polymer composite materials were synthesized and tested under simulated usage and accident conditions. The composites were made by polymerizing vinyl monomers using free-radical polymerization chemistry, in the presence of the metal hydride. Composites with vinyl-containing siloxane oligomers were also polymerized with and without added styrene and divinyl benzene. Hydrogen capacity measurements revealed that addition of the polymer to the metal hydride reduced the inherent hydrogen storage capacity of the material. The composites were found to be initially effective at reducing the amount of heat released during oxidation. However, upon cycling the composites, the mitigating behavior was lost. While the polymer composites we investigated have mitigating potential and are physically robust, they undergo a chemical change upon cycling that makes them subsequently ineffective at mitigating heat release upon oxidation of the metal hydride. Acknowledgements The authors would like to thank the following people who participated in this project: Ned Stetson (U.S. Department of Energy) for sponsorship and support of the project. Ken Stewart (Sandia) for building the flow-through calorimeter and cycling test stations. Isidro Ruvalcaba, Jr. (Sandia) for qualitative experiments on the interaction of sodium alanate with water. Terry Johnson (Sandia) for sharing his expertise and knowledge of metal hydrides, and sodium alanate in particular. Marcina Moreno (Sandia) for programmatic assistance. John Khalil (United Technologies Research Corp) for insight into the hazards of reactive metal hydrides and real-world accident scenario experiments. Summary In an attempt to mitigate and/or manage hazards associated with storing bulk quantities of reactive metal hydrides, polymer composite materials (a mixture of a mitigating polymer and a metal hydride) were synthesized and tested


    Energy Technology Data Exchange (ETDEWEB)

    Greenspan, Ehud; Todreas, Neil; Taiwo, Temitope


    The objective of this DOE NERI program sponsored project was to assess the feasibility of improving the plutonium (Pu) and minor actinide (MA) recycling capabilities of pressurized water reactors (PWRs) by using hydride instead of oxide fuels. There are four general parts to this assessment: 1) Identifying promising hydride fuel assembly designs for recycling Pu and MAs in PWRs 2) Performing a comprehensive systems analysis that compares the fuel cycle characteristics of Pu and MA recycling in PWRs using the promising hydride fuel assembly designs identified in Part 1 versus using oxide fuel assembly designs 3) Conducting a safety analysis to assess the likelihood of licensing hydride fuel assembly designs 4) Assessing the compatibility of hydride fuel with cladding materials and water under typical PWR operating conditions Hydride fuel was found to offer promising transmutation characteristics and is recommended for further examination as a possible preferred option for recycling plutonium in PWRs.

  20. Composition and structure of sputter deposited erbium hydride thin films

    Energy Technology Data Exchange (ETDEWEB)



    Erbium hydride thin films are grown onto polished, a-axis {alpha} Al{sub 2}O{sub 3} (sapphire) substrates by reactive ion beam sputtering and analyzed to determine composition, phase and microstructure. Erbium is sputtered while maintaining a H{sub 2} partial pressure of 1.4 x 10{sup {minus}4} Torr. Growth is conducted at several substrate temperatures between 30 and 500 C. Rutherford backscattering spectrometry (RBS) and elastic recoil detection analyses after deposition show that the H/Er areal density ratio is approximately 3:1 for growth temperatures of 30, 150 and 275 C, while for growth above {approximately}430 C, the ratio of hydrogen to metal is closer to 2:1. However, x-ray diffraction shows that all films have a cubic metal sublattice structure corresponding to that of ErH{sub 2}. RBS and Auger electron that sputtered erbium hydride thin films are relatively free of impurities.

  1. Optical studies of neutron-irradiated lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Oparin, D.V.; Pilipenko, G.I.; Tyutyunnik, O.I.; Gavrilov, F.F.; Sulimov, E.M. (Ural' skij Politekhnicheskij Inst., Sverdlovsk (USSR))


    Lithium hydride single crystals irradiated with neutrons were studied by the optical method. Wide bands belonging to the large F-aggregate and quasimetallic F-centres and to the metallic lithium colloids were discovered in the absorption spectra at room temperature. The small Fsub(n)-centres and molecular lithium centres were detected at 77 K. From the electron-vibrational structure of the absorption spectra of these centres the energies of acoustic phonons in X, W, L points of the Brillouin zone of lithium hydride have been found out: TA(L)-235 cm/sup -1/, TA(X)-27g cm/sup -1/, TA(W)-327 cm/sup -1/, LA(W)-384 cm/sup -1/, LA(X)-426 cm/sup -1/.


    Energy Technology Data Exchange (ETDEWEB)

    Zidan, R; Christopher Fewox, C; Brenda Garcia-Diaz, B; Joshua Gray, J


    One of the challenges of implementing the hydrogen economy is finding a suitable solid H{sub 2} storage material. Aluminium (alane, AlH{sub 3}) hydride has been examined as a potential hydrogen storage material because of its high weight capacity, low discharge temperature, and volumetric density. Recycling the dehydride material has however precluded AlH{sub 3} from being implemented due to the large pressures required (>10{sup 5} bar H{sub 2} at 25 C) and the thermodynamic expense of chemical synthesis. A reversible cycle to form alane electrochemically using NaAlH{sub 4} in THF been successfully demonstrated. Alane is isolated as the triethylamine (TEA) adduct and converted to unsolvated alane by heating under vacuum. To complete the cycle, the starting alanate can be regenerated by direct hydrogenation of the dehydrided alane and the alkali hydride (NaH) This novel reversible cycle opens the door for alane to fuel the hydrogen economy.

  3. Development of a novel metal hydride-air secondary battery

    Energy Technology Data Exchange (ETDEWEB)

    Gamburzev, S.; Zhang, W.; Velev, O.A.; Srinivasan, S.; Appleby, A.J. [Texas A and M University, College Station (United States). Center for Electrochemical Systems and Hydrogen Research; Visintin, A. [Universidad Nacional de La Plata (Argentina). Insituto Nacional de Investigaciones Fisicoquimica Teoricas y Applicadas


    A laboratory metal hydride/air cell was evaluated. Charging was via a bifunctional air gas-diffusion electrode. Mixed nickel and cobalt oxides, supported on carbon black and activated carbon, were used as catalysts in this electrode. At 30 mA cm{sup -2} in 6 M KOH, the air electrode potentials were -0.2 V (oxygen reduction) and +0.65 V (oxygen evolution) vs Hg/HgO. The laboratory cell was cycled for 50 cycles at the C/2 rate (10 mA cm{sup -2}). The average discharge/charge voltages of the cell were 0.65 and 1.6 V, respectively. The initial capacity of the metal hydride electrode decreased by about 15% after 50 cycles. (author)

  4. Hydrogen Storage in Porous Materials and Magnesium Hydrides


    Grzech, A.


    In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen storage mechanism of selected Metal-Organic Framework (MOF) materials. Such knowledge may provide information in which direction improvements of the materials may be possible. Detailed analysis of the h...

  5. Powder production of U-Mo alloy, HMD process (Hydriding- Milling- Dehydriding)

    Energy Technology Data Exchange (ETDEWEB)

    Pasqualini, E. E.; Garcia, J.H.; Lopez, M.; Cabanillas, E.; Adelfang, P. [Dept. Combustibles Nucleares. Comision Nacional de Energia Atomica, Av. Gral. Paz 1499, 1650 Buenos Aires (Argentina)


    Uranium-molybdenum (U-Mo) alloys can be hydrided massively in metastable {gamma} (gamma) phase. The brittle hydride can be milled and dehydrided to acquire the desired size distributions needed for dispersion nuclear fuels. The developments of the different steps of this process called hydriding-milling- dehydriding (HMD Process) are described. Powder production scales for industrial fabrication is easily achieved with conventional equipment, small man-power and low investment. (author)

  6. Oxidation of Group 8 transition-Metal Hydrides and Ionic Hydrogenation of Ketones and Aldehydes

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Kjell-Tore


    Transition-metal hydrides have received considerable attention during the last decades because of their unusual reactivity and their potential as homogeneous catalysts for hydrogenation and other reactions of organic substrates. An important class of catalytic processes where transition-metal hydrides are involved is the homogeneous hydrogenation of alkenes, alkynes, ketones, aldehydes, arenes and nitro compounds. This thesis studies the oxidation of Group 8 transition-metal hydrides and the ionic hydrogenation of ketones and aldehydes.

  7. High Temperature Metal Hydrides as Heat Storage Materials for Solar and Related Applications

    Directory of Open Access Journals (Sweden)

    Borislav Bogdanović


    Full Text Available For the continuous production of electricity with solar heat power plants the storage of heat at a temperature level around 400 °C is essential. High temperature metal hydrides offer high heat storage capacities around this temperature. Based on Mg-compounds, these hydrides are in principle low-cost materials with excellent cycling stability. Relevant properties of these hydrides and their possible applications as heat storage materials are described.

  8. Two-dimensional dynamic simulation of hydrogen storage in metal hydride tanks


    Brown, TM; Brouwer, J.; Samuelsen, GS; Holcomb, FH; King, J


    As proton exchange membrane fuel cell technology advances, the need for hydrogen storage intensifies. Metal hydride alloys offer one potential solution. However, for metal hydride tanks to become a viable hydrogen storage option, the dynamic performance of different tank geometries and configurations must be evaluated. In an effort to relate tank performance to geometry and operating conditions, a dynamic, two-dimensional, multi-nodal metal hydride tank model has been created in Matlab-Simuli...

  9. Design and Characterization of a Hydride-based Hydrogen Storage Container for Neutron Imaging Studies (United States)

    Baruj, A.; Ardito, M.; Marín, J.; Sánchez, F.; Borzone, E. M.; Meyer, G.

    We have designed, constructed and tested a prototype hydride-based container to in-situ observe the hydride decomposition process using a neutron imaging facility. This work describes the container design parameters and the experimental setup used for the studies. The results open new possibilities for the application of the neutron imaging technique to visualize the internal state of massive hydride-based hydrogen containers, thus aiding in the design of efficient hydrogen storage tanks.

  10. Diffusional exchange of isotopes in a metal hydride sphere.

    Energy Technology Data Exchange (ETDEWEB)

    Wolfer, Wilhelm G.; Hamilton, John C.; James, Scott Carlton


    This report describes the Spherical Particle Exchange Model (SPEM), which simulates exchange of one hydrogen isotope by another hydrogen isotope in a spherical metal hydride particle. This is one of the fundamental physical processes during isotope exchange in a bed of spherical metal particles and is thus one of the key components in any comprehensive physics-based model of exchange. There are two important physical processes in the model. One is the entropy of mixing between the two isotopes; the entropy of mixing is increased by having both isotopes randomly placed at interstitial sites on the lattice and thus impedes the exchange process. The other physical process is the elastic interaction between isotope atoms on the lattice. The elastic interaction is the cause for {beta}-phase formation and is independent of the isotope species. In this report the coupled diffusion equations for two isotopes in the {beta}-phase hydride are solved. A key concept is that the diffusion of one isotope depends not only on its concentration gradient, but also on the concentration gradient of the other isotope. Diffusion rate constants and the chemical potentials for deuterium and hydrogen in the {beta}-phase hydride are reviewed because these quantities are essential for an accurate model of the diffusion process. Finally, a summary of some of the predictions from the SPEM model are provided.

  11. Metal hydride-based thermal energy storage systems (United States)

    Vajo, John J.; Fang, Zhigang


    The invention provides a thermal energy storage system comprising a metal-containing first material with a thermal energy storage density of about 1300 kJ/kg to about 2200 kJ/kg based on hydrogenation; a metal-containing second material with a thermal energy storage density of about 200 kJ/kg to about 1000 kJ/kg based on hydrogenation; and a hydrogen conduit for reversibly transporting hydrogen between the first material and the second material. At a temperature of C. and in 1 hour, at least 90% of the metal is converted to the hydride. At a temperature of C. and in 1 hour, at least 90% of the metal hydride is converted to the metal and hydrogen. The disclosed metal hydride materials have a combination of thermodynamic energy storage densities and kinetic power capabilities that previously have not been demonstrated. This performance enables practical use of thermal energy storage systems for electric vehicle heating and cooling.

  12. Hydrogen storage and evolution catalysed by metal hydride complexes. (United States)

    Fukuzumi, Shunichi; Suenobu, Tomoyoshi


    The storage and evolution of hydrogen are catalysed by appropriate metal hydride complexes. Hydrogenation of carbon dioxide by hydrogen is catalysed by a [C,N] cyclometalated organoiridium complex, [Ir(III)(Cp*)(4-(1H-pyrazol-1-yl-κN(2))benzoic acid-κC(3))(OH(2))](2)SO(4) [Ir-OH(2)](2)SO(4), under atmospheric pressure of H(2) and CO(2) in weakly basic water (pH 7.5) at room temperature. The reverse reaction, i.e., hydrogen evolution from formate, is also catalysed by [Ir-OH(2)](+) in acidic water (pH 2.8) at room temperature. Thus, interconversion between hydrogen and formic acid in water at ambient temperature and pressure has been achieved by using [Ir-OH(2)](+) as an efficient catalyst in both directions depending on pH. The Ir complex [Ir-OH(2)](+) also catalyses regioselective hydrogenation of the oxidised form of β-nicotinamide adenine dinucleotide (NAD(+)) to produce the 1,4-reduced form (NADH) under atmospheric pressure of H(2) at room temperature in weakly basic water. In weakly acidic water, the complex [Ir-OH(2)](+) also catalyses the reverse reaction, i.e., hydrogen evolution from NADH to produce NAD(+) at room temperature. Thus, interconversion between NADH (and H(+)) and NAD(+) (and H(2)) has also been achieved by using [Ir-OH(2)](+) as an efficient catalyst and by changing pH. The iridium hydride complex formed by the reduction of [Ir-OH(2)](+) by H(2) and NADH is responsible for the hydrogen evolution. Photoirradiation (λ > 330 nm) of an aqueous solution of the Ir-hydride complex produced by the reduction of [Ir-OH(2)](+) with alcohols resulted in the quantitative conversion to a unique [C,C] cyclometalated Ir-hydride complex, which can catalyse hydrogen evolution from alcohols in a basic aqueous solution (pH 11.9). The catalytic mechanisms of the hydrogen storage and evolution are discussed by focusing on the reactivity of Ir-hydride complexes.

  13. Development and evaluation of a hydride technique for As, Sb, and Se determinations by inductively coupled plasma-atomic emission spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Sloat, Sharon Sue [Iowa State Univ., Ames, IA (United States)


    A literature review of hydride techniques, experimental facilities, development and evaluation of a hydride technique, and interelement effects are covered. Suggestions for future work are given. (LK)

  14. Low-Cost Metal Hydride Thermal Energy Storage System for Concentrating Solar Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Zidan, Ragaiy [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hardy, B. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Corgnale, C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Teprovich, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Ward, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Motyka, Ted [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    The objective of this research was to evaluate and demonstrate a metal hydride-based TES system for use with a CSP system. A unique approach has been applied to this project that combines our modeling experience with the extensive material knowledge and expertise at both SRNL and Curtin University (CU). Because of their high energy capacity and reasonable kinetics many metal hydride systems can be charged rapidly. Metal hydrides for vehicle applications have demonstrated charging rates in minutes and tens of minutes as opposed to hours. This coupled with high heat of reaction allows metal hydride TES systems to produce very high thermal power rates (approx. 1kW per 6-8 kg of material). A major objective of this work is to evaluate some of the new metal hydride materials that have recently become available. A problem with metal hydride TES systems in the past has been selecting a suitable high capacity low temperature metal hydride material to pair with the high temperature material. A unique aspect of metal hydride TES systems is that many of these systems can be located on or near dish/engine collectors due to their high thermal capacity and small size. The primary objective of this work is to develop a high enthalpy metal hydride that is capable of reversibly storing hydrogen at high temperatures (> 650 °C) and that can be paired with a suitable low enthalpy metal hydride with low cost materials. Furthermore, a demonstration of hydrogen cycling between the two hydride beds is desired.

  15. Well-Defined Silica Supported Aluminum Hydride: Another Step Towards the Utopian Single Site Dream?

    KAUST Repository

    Werghi, Baraa


    Reaction of triisobutylaluminum with SBA15700 at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges. It leads to the formation of a well-defined bipodal [(≡SiO)2Al-CH2CH(CH3)2] 1a, silicon isobutyl [≡Si-CH2CH(CH3)2] 1b and a silicon hydride [≡Si-H] 1c. Their structural identity was characterized by FT-IR and advance solid-state NMR spectroscopies (1H, 13C, 29Si, 27Al and 2D multiple quantum), elemental and gas phase analysis, and DFT calculations. The reaction involves the formation of a highly reactive monopodal intermediate: [≡SiO-Al-[CH2CH(CH3)2]2], with evolution of isobutane. This intermediate undergoes two parallel routes: Transfer of either one isobutyl fragment or of one hydride to an adjacent silicon atom. Both processes occur by opening of a strained siloxane bridge, ≡Si-O-Si≡ but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O-Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a ß-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al-H bond and a O-Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10-5 mbar) generates Al-H through a ß-H elimination of isobutyl fragment. These supported well-defined Al-H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and 27Al–1H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.

  16. Combined on-board hydride slurry storage and reactor system and process for hydrogen-powered vehicles and devices (United States)

    Brooks, Kriston P; Holladay, Jamelyn D; Simmons, Kevin L; Herling, Darrell R


    An on-board hydride storage system and process are described. The system includes a slurry storage system that includes a slurry reactor and a variable concentration slurry. In one preferred configuration, the storage system stores a slurry containing a hydride storage material in a carrier fluid at a first concentration of hydride solids. The slurry reactor receives the slurry containing a second concentration of the hydride storage material and releases hydrogen as a fuel to hydrogen-power devices and vehicles.

  17. Well-Defined Molecular Magnesium Hydride Clusters : Relationship between Size and Hydrogen-Elimination Temperature

    NARCIS (Netherlands)

    Intemann, Julia; Spielmann, Jan; Sirsch, Peter; Harder, Sjoerd

    A new tetranuclear magnesium hydride cluster, [{NN-(MgH)2}2], which was based on a NN-coupled bis--diketiminate ligand (NN2-), was obtained from the reaction of [{NN-(MgnBu)2}2] with PhSiH3. Its crystal structure reveals an almost-tetrahedral arrangement of Mg atoms and two different sets of hydride

  18. Study on the Use of Hydride Fuel in High-Performance Light Water Reactor Concept

    Directory of Open Access Journals (Sweden)

    Haileyesus Tsige-Tamirat


    Full Text Available Hydride fuels have features which could make their use attractive in future advanced power reactors. The potential benefit of use of hydride fuel in HPLWR without introducing significant modification in the current core design concept of the high-performance light water reactor (HPLWR has been evaluated. Neutronics and thermal hydraulic analyses were performed for a single assembly model of HPLWR with oxide and hydride fuels. The hydride assembly shows higher moderation with softer neutron spectrum and slightly more uniform axial power distribution. It achieves a cycle length of 18 months with sufficient excess reactivity. At Beginning of Cycle the fuel temperature coefficient of the hydride assembly is higher whereas the moderator and void coefficients are lower. The thermal hydraulic results show that the achievable fuel temperature in the hydride assembly is well below the design limits. The potential benefits of the use of hydride fuel in the current design of the HPLWR with the achieved improvements in the core neutronics characteristics are not sufficient to justify the replacement of the oxide fuel. Therefore for a final evaluation of the use of hydride fuels in HPLWR concepts additional studies which include modification of subassembly and core layout designs are required.

  19. Speculations on the existence of hydride ions in proton conducting oxides

    DEFF Research Database (Denmark)

    Poulsen, F.W.


    The chemical and physical nature of the hydride ion is briefly treated. Several reactions of the hydride ion in oxides or oxygen atmosphere are given, A number of perovskites and inverse perovskites are listed. which contain the H- ion on the oxygen or B-anion sites in the archetype ABO(3) System...

  20. Hydrides in young stellar objects : Radiation tracers in a protostar-disk-outflow system

    NARCIS (Netherlands)

    Benz, A. O.; Bruderer, S.; van Dishoeck, E. F.; Staeuber, P.; Wampfler, S. F.; Melchior, M.; Dedes, C.; Wyrowski, F.; Doty, S. D.; van der Tak, F.; Baechtold, W.; Csillaghy, A.; Megej, A.; Monstein, C.; Soldati, M.; Bachiller, R.; Baudry, A.; Benedettini, M.; Bergin, E.; Bjerkeli, P.; Blake, G.A.; Bontemps, S.; Braine, J.; Caselli, P.; Cernicharo, J.; Codella, C.; Daniel, F.; di Giorgio, A. M.; Dieleman, P.; Dominik, C.; Encrenaz, P.; Fich, M.; Fuente, A.; Giannini, T.; Goicoechea, J. R.; de Graauw, Th.; Helmich, F.; Herczeg, G. J.; Herpin, F.; Hogerheijde, M. R.; Jacq, T.; Jellema, W.; Johnstone, D.; Jorgensen, J. K.; Kristensen, L. E.; Larsson, B.; Lis, D.; Liseau, R.; Marseille, M.; McCoey, C.; Melnick, G.; Neufeld, D.; Nisini, B.; Olberg, M.; Ossenkopf, V.; Parise, B.; Pearson, J. C.; Plume, R.; Risacher, C.; Santiago-Garcia, J.; Saraceno, P.; Schieder, R.; Shipman, R.; Stutzki, J.; Tafalla, M.; Tielens, A. G. G. M.; van Kempen, T. A.; Visser, R.; Yildiz, U. A.


    Context. Hydrides of the most abundant heavier elements are fundamental molecules in cosmic chemistry. Some of them trace gas irradiated by UV or X-rays. Aims. We explore the abundances of major hydrides in W3 IRS5, a prototypical region of high-mass star formation. Methods. W3 IRS5 was observed by

  1. Hydrides in young stellar objects: Radiation tracers in a protostar-disk-outflow system

    NARCIS (Netherlands)

    Benz, A.O.; Bruderer, S.; van Dishoeck, E.F.; Stäuber, P.; Wampfler, S.F.; Melchior, M.; Dedes, C.; Wyrowski, F.; Doty, S.D.; van der Tak, F.; Bächtold, W.; Csillaghy, A.; Megej, A.; Monstein, C.; Soldati, M.; Bachiller, R.; Baudry, A.; Benedettini, M.; Bergin, E.; Bjerkeli, P.; Blake, G.A.; Bontemps, S.; Braine, J.; Caselli, P.; Cernicharo, J.; Codella, C.; Daniel, F.; Di Giorgio, A.M.; Dieleman, P.; Dominik, C.; Encrenaz, P.; Fich, M.; Fuente, A.; Giannini, T.; Goicoechea, J.R.; de Graauw, T.; Helmich, F.; Herczeg, G.J.; Herpin, F.; Hogerheijde, M.R.; Jacq, T.; Jellema, W.; Johnstone, D.; Jørgensen, J.K.; Kristensen, L.E.; Larsson, B.; Lis, D.; Liseau, R.; Marseille, M.; McCoey, C.; Melnick, G.; Neufeld, D.; Nisini, B.; Olberg, M.; Ossenkopf, V.; Parise, B.; Pearson, J.C.; Plume, R.; Risacher, C.; Santiago-García, J.; Saraceno, P.; Schieder, R.; Shipman, R.; Stutzki, J.; Tafalla, M.; Tielens, A.G.G.M.; van Kempen, T.A.; Visser, R.; Yıldız, U.A.


    Context. Hydrides of the most abundant heavier elements are fundamental molecules in cosmic chemistry. Some of them trace gas irradiated by UV or X-rays. Aims. We explore the abundances of major hydrides in W3 IRS5, a prototypical region of high-mass star formation. Methods. W3 IRS5 was observed by

  2. Pore-Confined Light Metal Hydrides for Energy Storage and Catalysis

    NARCIS (Netherlands)

    Bramwell, P.L.


    Light metal hydrides have enjoyed several decades of attention in the field of hydrogen storage, but their applications have recently begun to diversify more and more into the broader field of energy storage. For example, light metal hydrides have shown great promise as battery materials, in sensors

  3. Compensation Effect in the Hydrogenation/Dehydrogenation Kinetics of Metal Hydrides

    DEFF Research Database (Denmark)

    Andreasen, A.; Vegge, T.; Pedersen, Allan Schrøder


    The possible existence of a compensation effect, i.e. concurrent changes in activation energy and prefactor, is investigated for the hydrogenation and dehydrogenation kinetics of metal hydrides, by analyzing a series of reported kinetic studies on Mg and LaNi5 based hydrides. For these systems, we...

  4. Hydrogen storage material and process using graphite additive with metal-doped complex hydrides (United States)

    Zidan, Ragaiy [Aiken, SC; Ritter, James A [Lexington, SC; Ebner, Armin D [Lexington, SC; Wang, Jun [Columbia, SC; Holland, Charles E [Cayce, SC


    A hydrogen storage material having improved hydrogen absorbtion and desorption kinetics is provided by adding graphite to a complex hydride such as a metal-doped alanate, i.e., NaAlH.sub.4. The incorporation of graphite into the complex hydride significantly enhances the rate of hydrogen absorbtion and desorption and lowers the desorption temperature needed to release stored hydrogen.


    Energy Technology Data Exchange (ETDEWEB)

    Zidan, R; Christopher Fewox, C; Brenda Garcia-Diaz, B; Joshua Gray, J


    Hydrogen storage is one of the challenges to be overcome for implementing the ever sought hydrogen economy. Here we report a novel cycle to reversibly form high density hydrogen storage materials such as aluminium hydride. Aluminium hydride (AlH{sub 3}, alane) has a hydrogen storage capacity of 10.1 wt% H{sub 2}, 149 kg H{sub 2}/m{sup 3} volumetric density and can be discharged at low temperatures (< 100 C). However, alane has been precluded from use in hydrogen storage systems because of the lack of practical regeneration methods. The direct hydrogenation of aluminium to form AlH{sub 3} requires over 10{sup 5} bars of hydrogen pressure at room temperature and there are no cost effective synthetic means. Here we show an unprecedented reversible cycle to form alane electrochemically, using alkali metal alanates (e.g. NaAlH{sub 4}, LiAlH{sub 4}) in aprotic solvents. To complete the cycle, the starting alanates can be regenerated by direct hydrogenation of the dehydrided alane and the alkali hydride being the other compound formed in the electrochemical cell. The process of forming NaAlH{sub 4} from NaH and Al is well established in both solid state and solution reactions. The use of adducting Lewis bases is an essential part of this cycle, in the isolation of alane from the mixtures of the electrochemical cell. Alane is isolated as the triethylamine (TEA) adduct and converted to pure, unsolvated alane by heating under vacuum.


    Energy Technology Data Exchange (ETDEWEB)

    Fewox, C; Ragaiy Zidan, R; Brenda Garcia-Diaz, B


    Hydrogen storage is one of the greatest challenges for implementing the ever sought hydrogen economy. Here we report a novel cycle to reversibly form high density hydrogen storage materials such as aluminium hydride. Aluminium hydride (AlH{sub 3}, alane) has a hydrogen storage capacity of 10.1 wt% H{sub 2}, 149 kg H{sub 2}/m{sup 3} volumetric density and can be discharged at low temperatures (< 100 C). However, alane has been precluded from use in hydrogen storage systems because of the lack of practical regeneration methods; the direct hydrogenation of aluminium to form AlH{sub 3} requires over 10{sup 5} bars of hydrogen pressure at room temperature and there are no cost effective synthetic means. Here we show an unprecedented reversible cycle to form alane electrochemically, using alkali alanates (e.g. NaAlH{sub 4}, LiAlH{sub 4}) in aprotic solvents. To complete the cycle, the starting alanates can be regenerated by direct hydrogenation of the dehydrided alane and the alkali hydride being the other compound formed in the electrochemical cell. The process of forming NaAlH{sub 4} from NaH and Al is well established in both solid state and solution reactions. The use of adducting Lewis bases is an essential part of this cycle, in the isolation of alane from the mixtures of the electrochemical cell. Alane is isolated as the triethylamine (TEA) adduct and converted to pure, unsolvated alane by heating under vacuum.

  7. Mathematical modeling of the nickel/metal hydride battery system

    Energy Technology Data Exchange (ETDEWEB)

    Paxton, Blaine Kermit [Univ. of California, Berkeley, CA (United States). Dept. of Chemical Engineering


    A group of compounds referred to as metal hydrides, when used as electrode materials, is a less toxic alternative to the cadmium hydroxide electrode found in nickel/cadmium secondary battery systems. For this and other reasons, the nickel/metal hydride battery system is becoming a popular rechargeable battery for electric vehicle and consumer electronics applications. A model of this battery system is presented. Specifically the metal hydride material, LaNi{sub 5}H{sub 6}, is chosen for investigation due to the wealth of information available in the literature on this compound. The model results are compared to experiments found in the literature. Fundamental analyses as well as engineering optimizations are performed from the results of the battery model. In order to examine diffusion limitations in the nickel oxide electrode, a ``pseudo 2-D model`` is developed. This model allows for the theoretical examination of the effects of a diffusion coefficient that is a function of the state of charge of the active material. It is found using present data from the literature that diffusion in the solid phase is usually not an important limitation in the nickel oxide electrode. This finding is contrary to the conclusions reached by other authors. Although diffusion in the nickel oxide active material is treated rigorously with the pseudo 2-D model, a general methodology is presented for determining the best constant diffusion coefficient to use in a standard one-dimensional battery model. The diffusion coefficients determined by this method are shown to be able to partially capture the behavior that results from a diffusion coefficient that varies with the state of charge of the active material.

  8. Single-Site Tetracoordinated Aluminum Hydride Supported on Mesoporous Silica. From Dream to Reality!

    KAUST Repository

    Werghi, Baraa


    The reaction of mesoporous silica (SBA15) dehydroxylated at 700 °C with diisobutylaluminum hydride, i-Bu2AlH, gives after thermal treatment a single-site tetrahedral aluminum hydride with high selectivity. The starting aluminum isobutyl and the final aluminum hydride have been fully characterized by FT-IR, advanced SS NMR spectroscopy (1H, 13C, multiple quanta (MQ) 2D 1H-1H, and 27Al), and elemental analysis, while DFT calculations provide a rationalization of the occurring reactivity. Trimeric i-Bu2AlH reacts selectively with surface silanols without affecting the siloxane bridges. Its analogous hydride catalyzes ethylene polymerization. Indeed, catalytic tests show that this single aluminum hydride site is active in the production of a high-density polyethylene (HDPE). © 2016 American Chemical Society.

  9. Another Look at the Mechanisms of Hydride Transfer Enzymes with Quantum and Classical Transition Path Sampling. (United States)

    Dzierlenga, Michael W; Antoniou, Dimitri; Schwartz, Steven D


    The mechanisms involved in enzymatic hydride transfer have been studied for years, but questions remain due, in part, to the difficulty of probing the effects of protein motion and hydrogen tunneling. In this study, we use transition path sampling (TPS) with normal mode centroid molecular dynamics (CMD) to calculate the barrier to hydride transfer in yeast alcohol dehydrogenase (YADH) and human heart lactate dehydrogenase (LDH). Calculation of the work applied to the hydride allowed for observation of the change in barrier height upon inclusion of quantum dynamics. Similar calculations were performed using deuterium as the transferring particle in order to approximate kinetic isotope effects (KIEs). The change in barrier height in YADH is indicative of a zero-point energy (ZPE) contribution and is evidence that catalysis occurs via a protein compression that mediates a near-barrierless hydride transfer. Calculation of the KIE using the difference in barrier height between the hydride and deuteride agreed well with experimental results.

  10. Dynamics of a cis-dihydrogen/hydride complex of iridium. (United States)

    Nanishankar, H V; Dutta, Saikat; Nethaji, Munirathinam; Jagirdar, Balaji R


    Insertion of CS2 into one of the Ir-H bonds of [Ir(H)5(PCy3)2] takes place to afford the dihydrido dithioformate complex cis-[Ir(H)2(eta2-S2CH)(PCy3)2] accompanied by the elimination of H2. Protonation of the dithioformate complex using HBF4.Et2O gives cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] wherein the H atom undergoes site exchange between the dihydrogen and the hydride ligands. The dynamics was found to be so extremely rapid with respect to the NMR time scale that the barrier to exchange could not be measured. Partial deuteration of the hydride ligands resulted in a J(H,D) of 6.5 and 7.7 Hz for the H2D and the HD2 isotopomers of cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4], respectively. The H-H distance (d(HH)) for this complex has been calculated to be 1.05 A, which can be categorized under the class of elongated dihydrogen complexes. The cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] complex undergoes substitution of the bound H2 moiety with CH(3)CN and CO resulting in new hydride derivatives, cis-[Ir(H)(L)(eta2-S2CH)(PCy3)2][BF4] (L = CH3CN, CO). Reaction of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] with electrophilic reagents such as MeOTf and Me3SiOTf afforded a new hydride aquo complex cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] via the elimination of CH4 and Me3SiH, respectively, followed by the binding of a water molecule (present in trace quantities in the solvent) to the iridium center. The X-ray crystal structures of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] and cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] have been determined.

  11. Modeling of Gallium Nitride Hydride Vapor Phase Epitaxy (United States)

    Meyyappan, Meyya; Arnold, James O. (Technical Monitor)


    A reactor model for the hydride vapor phase epitaxy of GaN is presented. The governing flow, energy, and species conservation equations are solved in two dimensions to examine the growth characteristics as a function of process variables and reactor geometry. The growth rate varies with GaCl composition but independent of NH3 and H2 flow rates. A change in carrier gas for Ga source from H2 to N2 affects the growth rate and uniformity for a fixed reactor configuration. The model predictions are in general agreement with observed experimental behavior.

  12. Research in Nickel/Metal Hydride Batteries 2016

    Directory of Open Access Journals (Sweden)

    Kwo-Hsiung Young


    Full Text Available Nineteen papers focusing on recent research investigations in the field of nickel/metal hydride (Ni/MH batteries have been selected for this Special Issue of Batteries. These papers summarize the joint efforts in Ni/MH battery research from BASF, Wayne State University, the National Institute of Standards and Technology, Michigan State University, and FDK during 2015–2016 through reviews of basic operational concepts, previous academic publications, issued US Patent and filed Japan Patent Applications, descriptions of current research results in advanced components and cell constructions, and projections of future works.

  13. Formation of alloys in Ti-V system in hydride cycle and synthesis of their hydrides in self-propagating high-temperature synthesis regime

    Energy Technology Data Exchange (ETDEWEB)

    Aleksanyan, A.G., E-mail: [A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, 5/2 P.Sevak Str., Yerevan 0014 (Armenia); Dolukhanyan, S.K. [A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, 5/2 P.Sevak Str., Yerevan 0014 (Armenia); Shekhtman, V.Sh. [Institute of Solid State Physics, RAS, Chernogolovka, Moscow District 142432 (Russian Federation); Huot, J., E-mail: [Institut de recherche sur l' hydrogene, Universite du Quebec a Trois-Rivieres (Canada); Ter-Galstyan, O.P.; Mnatsakanyan, N.L. [A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, 5/2 P.Sevak Str., Yerevan 0014 (Armenia)


    Research highlights: > We synthesize Ti-V alloys by new 'hydride cycle' method. Structural characteristics of formed alloys we investigate by X-ray diffraction. > We show that the alloys contain mainly BCC crystal structure. > We investigate the interaction of the synthesized alloys with hydrogen in combustion regime. > We study the properties of hydrides by X-ray, DTA and DSC analyses. - Abstract: In the present work, the possibility of formation of titanium and vanadium based alloys of BCC structure using hydride cycle was investigated. The mechanism of formation of alloys in Ti-V system from the powders of hydrides TiH{sub 2} and VH{sub 0.9} (or of V) by compaction followed by dehydrogenation was studied. Then, the interaction of the synthesized alloys with hydrogen in combustion regime (self-propagating high-temperature synthesis, SHS) resulting in hydrides of these alloys was investigated. DTA and DSC analyses of some alloys and their hydrides were performed and their thermal characteristics were measured.

  14. Electron- and hydride-transfer reactivity of an isolable manganese(V)-oxo complex. (United States)

    Fukuzumi, Shunichi; Kotani, Hiroaki; Prokop, Katharine A; Goldberg, David P


    The electron-transfer and hydride-transfer properties of an isolated manganese(V)−oxo complex, (TBP8Cz)Mn(V)(O) (1) (TBP8Cz = octa-tert-butylphenylcorrolazinato) were determined by spectroscopic and kinetic methods. The manganese(V)−oxo complex 1 reacts rapidly with a series of ferrocene derivatives ([Fe(C5H4Me)2], [Fe(C5HMe4)2], and ([Fe(C5Me5)2] = Fc*) to give the direct formation of [(TBP8Cz)Mn(III)(OH)]− ([2-OH]−), a two-electron-reduced product. The stoichiometry of these electron-transfer reactions was found to be (Fc derivative)/1 = 2:1 by spectral titration. The rate constants of electron transfer from ferrocene derivatives to 1 at room temperature in benzonitrile were obtained, and the successful application of Marcus theory allowed for the determination of the reorganization energies (λ) of electron transfer. The λ values of electron transfer from the ferrocene derivatives to 1 are lower than those reported for a manganese(IV)−oxo porphyrin. The presumed one-electron-reduced intermediate, a Mn(IV) complex, was not observed during the reduction of 1. However, a Mn(IV) complex was successfully generated via one-electron oxidation of the Mn(III) precursor complex 2 to give [(TBP8Cz)Mn(IV)]+ (3). Complex 3 exhibits a characteristic absorption band at λ(max) = 722 nm and an EPR spectrum at 15 K with g(max)′ = 4.68, g(mid)′ = 3.28, and g(min)′ = 1.94, with well-resolved 55Mn hyperfine coupling, indicative of a d3 Mn(IV)S = 3/2 ground state. Although electron transfer from [Fe(C5H4Me)2] to 1 is endergonic (uphill), two-electron reduction of 1 is made possible in the presence of proton donors (e.g., CH3CO2H, CF3CH2OH, and CH3OH). In the case of CH3CO2H, saturation behavior for the rate constants of electron transfer (k(et)) versus acid concentration was observed, providing insight into the critical involvement of H+ in the mechanism of electron transfer. Complex 1 was also shown to be competent to oxidize a series of dihydronicotinamide adenine

  15. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of antimony by automated-hydride atomic absorption spectrophotometry (United States)

    Brown, G.E.; McLain, B.J.


    The analysis of natural-water samples for antimony by automated-hydride atomic absorption spectrophotometry is described. Samples are prepared for analysis by addition of potassium and hydrochloric acid followed by an autoclave digestion. After the digestion, potassium iodide and sodium borohydride are added automatically. Antimony hydride (stibine) gas is generated, then swept into a heated quartz cell for determination of antimony by atomic absorption spectrophotometry. Precision and accuracy data are presented. Results obtained on standard reference water samples agree with means established by interlaboratory studies. Spike recoveries for actual samples range from 90 to 114 percent. Replicate analyses of water samples of varying matrices give relative standard deviations from 3 to 10 percent.

  16. Development of a component design tool for metal hydride heat pumps (United States)

    Waters, Essene L.

    Given current demands for more efficient and environmentally friendly energy sources, hydrogen based energy systems are an increasingly popular field of interest. Within the field, metal hydrides have become a prominent focus of research due to their large hydrogen storage capacity and relative system simplicity and safety. Metal hydride heat pumps constitute one such application, in which heat and hydrogen are transferred to and from metal hydrides. While a significant amount of work has been done to study such systems, the scope of materials selection has been quite limited. Typical studies compare only a few metal hydride materials and provide limited justification for the choice of those few. In this work, a metal hydride component design tool has been developed to enable the targeted down-selection of an extensive database of metal hydrides to identify the most promising materials for use in metal hydride thermal systems. The material database contains over 300 metal hydrides with various physical and thermodynamic properties included for each material. Sub-models for equilibrium pressure, thermophysical data, and default properties are used to predict the behavior of each material within the given system. For a given thermal system, this tool can be used to identify optimal materials out of over 100,000 possible hydride combinations. The selection tool described herein has been applied to a stationary combined heat and power system containing a high-temperature proton exchange membrane (PEM) fuel cell, a hot water tank, and two metal hydride beds used as a heat pump. A variety of factors can be used to select materials including efficiency, maximum and minimum system pressures, pressure difference, coefficient of performance (COP), and COP sensitivity. The targeted down-selection of metal hydrides for this system focuses on the system's COP for each potential pair. The values of COP and COP sensitivity have been used to identify pairs of highest interest for

  17. Electronic structure of the palladium hydride studied by compton scattering

    CERN Document Server

    Mizusaki, S; Yamaguchi, M; Hiraoka, N; Itou, M; Sakurai, Y


    The hydrogen-induced changes in the electronic structure of Pd have been investigated by Compton scattering experiments associated with theoretical calculations. Compton profiles (CPs) of single crystal of Pd and beta phase hydride PdH sub x (x=0.62-0.74) have been measured along the [100], [110] and [111] directions with a momentum resolution of 0.14-0.17 atomic units using 115 keV x-rays. The theoretical Compton profiles have been calculated from the wavefunctions obtained utilizing the full potential linearized augmented plane wave method within the local density approximation for Pd and stoichiometric PdH. The experimental and the theoretical results agreed well with respect to the difference in the CPs between PdH sub x and Pd, and the anisotropy in the CPs of Pd or PdH sub x. This study provides lines of evidence that upon hydride formation the lowest valance band of Pd is largely modified due to hybridization with H 1s-orbitals and the Fermi energy is raised into the sp-band. (author)

  18. Effects of Alkaline Pre-Etching to Metal Hydride Alloys

    Directory of Open Access Journals (Sweden)

    Tiejun Meng


    Full Text Available The responses of one AB5, two AB2, four A2B7, and one C14-related body-centered-cubic (BCC metal hydrides to an alkaline-etch (45% KOH at 110 °C for 2 h were studied by internal resistance, X-ray diffraction, scanning electron microscope, inductively coupled plasma, and AC impedance measurements. Results show that while the etched rare earth–based AB5 and A2B7 alloys surfaces are covered with hydroxide/oxide (weight gain, the transition metal–based AB2 and BCC-C14 alloys surfaces are corroded and leach into electrolyte (weight loss. The C14-predominated AB2, La-only A2B7, and Sm-based A2B7 showed the most reduction in the internal resistance with the alkaline-etch process. Etched A2B7 alloys with high La-contents exhibited the lowest internal resistance and are suggested for use in the high-power application of nickel/metal hydride batteries.


    Energy Technology Data Exchange (ETDEWEB)

    Hardy, B.; Corgnale, C.; Tamburello, D.; Garrison, S.; Anton, D.


    The design and evaluation of media based hydrogen storage systems requires the use of detailed numerical models and experimental studies, with significant amount of time and monetary investment. Thus a scoping tool, referred to as the Acceptability Envelope, was developed to screen preliminary candidate media and storage vessel designs, identifying the range of chemical, physical and geometrical parameters for the coupled media and storage vessel system that allow it to meet performance targets. The model which underpins the analysis allows simplifying the storage system, thus resulting in one input-one output scheme, by grouping of selected quantities. Two cases have been analyzed and results are presented here. In the first application the DOE technical targets (Year 2010, Year 2015 and Ultimate) are used to determine the range of parameters required for the metal hydride media and storage vessel. In the second case the most promising metal hydrides available are compared, highlighting the potential of storage systems, utilizing them, to achieve 40% of the 2010 DOE technical target. Results show that systems based on Li-Mg media have the best potential to attain these performance targets.

  20. Multi-scale characterization of nanostructured sodium aluminum hydride (United States)

    NaraseGowda, Shathabish

    Complex metal hydrides are the most promising candidate materials for onboard hydrogen storage. The practicality of this class of materials is counter-poised on three critical attributes: reversible hydrogen storage capacity, high hydrogen uptake/release kinetics, and favorable hydrogen uptake/release thermodynamics. While a majority of modern metallic hydrides that are being considered are those that meet the criteria of high theoretical storage capacity, the challenges lie in addressing poor kinetics, thermodynamics, and reversibility. One emerging strategy to resolve these issues is via nanostructuring or nano-confinement of complex hydrides. By down-sizing and scaffolding them to retain their nano-dimensions, these materials are expected to improve in performance and reversibility. This area of research has garnered immense interest lately and there is active research being pursued to address various aspects of nanostructured complex hydrides. The research effort documented here is focused on a detailed investigation of the effects of nano-confinement on aspects such as the long range atomic hydrogen diffusivities, localized hydrogen dynamics, microstructure, and dehydrogenation mechanism of sodium alanate. A wide variety of microporous and mesoporous materials (metal organic frameworks, porous silica and alumina) were investigated as scaffolds and the synthesis routes to achieve maximum pore-loading are discussed. Wet solution infiltration technique was adopted using tetrahydrofuran as the medium and the precursor concentrations were found to have a major role in achieving maximum pore loading. These concentrations were optimized for each scaffold with varying pore sizes and confinement was quantitatively characterized by measuring the loss in specific surface area. This work is also aimed at utilizing neutron and synchrotron x-ray characterization techniques to study and correlate multi-scale material properties and phenomena. Some of the most advanced

  1. Hydride-shuttling chain-transfer polymerization of methacrylates catalyzed by metallocenium enolate metallacycle-hydridoborate ion pairs. (United States)

    Zhang, Yuetao; Caporaso, Lucia; Cavallo, Luigi; Chen, Eugene Y-X


    Activation of 12 group IV metallocene bis(ester enolate) complexes with B(C(6)F(5))(3) at room temperature (RT) affords quantitatively the corresponding isolable cationic eight-membered ester enolate metallacycles. This rapid two-step reaction consists of vinylogous hydride abstraction to form the anion [HB(C(6)F(5))(3)](-), and nucleophilic addition of the second enolate ligand to the methacrylate resulted from loss of a hydride in the first enolate ligand to form the chelating cation. This activation methodology for generating the active species (structural models for resting intermediates involved in methacrylate polymerization) is rather general, as demonstrated by a broad substrate scope examined in this study, including group IV metallocene bis(ester enolate) complexes that varied metals (Ti, Zr, Hf), bridging atoms (Ph(2)Cmethyl methacrylate (MMA) polymerization studies have identified metallacycle 4, {[Ph(2)C(Cp)(2,7-(t)Bu(2)-Flu)]Zr[OC(O(i)Pr)═CMeCH(2)C(Me(2))C(O(i)Pr)═O]}(+)[HB(C(6)F(5))(3)](-), as being the most active, efficient, and syndiospecific catalyst within the C(s)-ligated catalysts. Kinetic experiments at room temperature show that the MMA polymerization by 4 follows first-order kinetics in both [MMA] and [Zr], consistent with a monometallic, intramolecular coordination-addition mechanism that involves the eight-membered ester enolate chelate resting state. Thermodynamic experiments at varied temperatures yield activation parameters of ΔH(double dagger) = 6.23 kcal/mol, ΔS(double dagger) = -41.7 eu, and ΔG(double dagger) = 17.6 kcal/mol (273 K). As compared to ansa-Flu-Cp ligated chelating cations paired with more commonly used weakly coordinating anions such as [MeB(C(6)F(5))(3)](-) and [B(C(6)F(5))(4)](-), the same cations paired with the anion [HB(C(6)F(5))(3)](-) behave differently in MMA polymerization in terms of activity, stereospecificity, and sensitivity to solvent polarity. Most uniquely, [HB(C(6)F(5))(3)](-)-based catalysts

  2. Identification and characterization of a new zirconium hydride; Identification et caracterisation d'un nouvel hydrure de zirconium

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zhao; Morniroli, J.P.; Legris, A.; Thuinet, L. [Universite des Sciences et Technologies de Lille, USTL, ENSCL, CNRS, 59 - Villeneuve d' Ascq (France); Zhao, Zhao; Blat-Yrieix, M.; Ambard, A.; Legras, L. [Electricite de France (EDF/RD), Centre des Renardieres, 77 - Moret sur Loing (France); Kihn, Y. [CEMES-CNRS, 31 - Toulouse (France)


    A study of hydrides characterization has been carried out in using the transmission electron microscopy technique. It has revealed the presence of small hydrides of acicular form whose length does not exceed 500 nm, among the zircaloy-4 samples hydrided by cathodic way. The electronic diffraction has shown that these small hydrides have a crystallographic structure different of those of the hydrides phases already index in literature. A more complete identification study has then been carried out. In combining the different electronic microscopy techniques (precession electronic micro diffraction and EELS) with ab initio calculations, a new hydride phase has been identified. It is called hydride {zeta}, is of trigonal structure with lattice parameters a{sub {zeta}} = a{sub {alpha}}{sub Zr} = 0.33 nm and c{sub {zeta}} 2c{sub {alpha}}{sub Zr} = 1.029 nm, its spatial group being P3m1. (O.M.)

  3. Microstructures of the oxides on the activated AB{sub 2} and AB{sub 5} metal hydride alloys surface

    Energy Technology Data Exchange (ETDEWEB)

    Young, K., E-mail: [BASF/Battery Materials-Ovonic, 2983 Waterview Drive, Rochester Hills, MI 48309 (United States); Chao, B. [BASF/Battery Materials-Ovonic, 2983 Waterview Drive, Rochester Hills, MI 48309 (United States); Liu, Y. [Electron Microscopy Facility, 145 Linus Pauling Science Center, 2900 SW Campus Way, Oregon State University, Corvallis, OR 97331 (United States); Nei, J. [BASF/Battery Materials-Ovonic, 2983 Waterview Drive, Rochester Hills, MI 48309 (United States)


    Highlights: • Morphologies of surface hydroxide of AB{sub 2}, AB{sub 5}, and A{sub 2}B{sub 7} alloys were compared. • Nd promotes the formation of thick rod instead of fine needles. • Both AB{sub 2} and AB{sub 5} show similar buffer oxide + surface oxide structure. • The surface oxide layers in AB{sub 2} are thicker than those from AB{sub 5}. • AB{sub 2} surface is covered by oxide with less solubility in KOH. - Abstract: The surface oxides of the activated metal hydride alloys used as the negative electrode for nickel–metal hydride battery were studied by both scanning and transmission electron microscope techniques. In transition metal based AB{sub 2} metal hydride alloys, the surface of the powder is covered with oxides as a product of oxidation from the electrolyte and protected by zirconium oxide and vanadium-rich BCC-structured secondary phase. In the rare-earth based AB{sub 5} and A{sub 2}B{sub 7} metal hydride alloys, the surface is decorated with nano-structured needles and larger-scaled rods of hydroxides from the precipitation of rare earth ions after the oxidation by the electrolyte. Further TEM studies show the existence of a buffer oxide layer sandwiched between the inclusion-embedded surface oxide and alloy bulk in both AB{sub 2} and AB{sub 5} alloys. In both cases, the inclusions are found to be metallic nanocrystals mainly composed of Ni and Co as determined by electron energy loss spectroscopy, selective area electron diffraction, transmission electron atomic image, and X-ray energy dispersive spectroscopy. The Co-to-Ni ratio in the inclusion is larger than that in the bulk due to the less corrosive nature of Co. The additions of Co and Al in the AB{sub 2} are found to reduce number of activation cycles needed to generate a surface oxide with proper catalytic capability.

  4. Synthesis and Mechanism of Formation of Hydride-Sulfide Complexes of Iron. (United States)

    Arnet, Nicholas A; McWilliams, Sean F; DeRosha, Daniel E; Mercado, Brandon Q; Holland, Patrick L


    Iron-sulfide complexes with hydride ligands provide an experimental precedent for spectroscopically detected hydride species on the iron-sulfur MoFe 7 S 9 C cofactor of nitrogenase. In this contribution, we expand upon our recent synthesis of the first iron sulfide hydride complex from an iron hydride and a sodium thiolate ( Arnet, N. A.; Dugan, T. R.; Menges, F. S.; Mercado, B. Q.; Brennessel, W. W.; Bill, E.; Johnson, M. A.; Holland, P. L., J. Am. Chem. Soc. 2015 , 137 , 13220 - 13223 ). First, we describe the isolation of an analogous iron sulfide hydride with a smaller diketiminate supporting ligand, which benefits from easier preparation of the hydride precursor and easier isolation of the product. Second, we describe mechanistic studies on the C-S bond cleavage through which the iron sulfide hydride product is formed. In a key experiment, use of cyclopropylmethanethiolate as the sulfur precursor leads to products from cyclopropane ring opening, implicating an alkyl radical as an intermediate. Combined with the results of isotopic labeling studies, the data are consistent with a mechanism in which homolytic C-S bond cleavage is followed by rebound of the alkyl radical to abstract a hydrogen atom from iron to give the observed alkane and iron-sulfide products.

  5. Experimental and theoretical study of the hydriding behaviour in the pulse ecm of titanium alloys (United States)

    Smirnov, G. V.; Pronichev, N. D.; Nekhoroshev, M. V.; Bogdanovich, V. I.


    The titanium alloy hydriding is a negative factor since it may result in a slow-action destruction of parts operating at small loads. The introduction of pulse electrochemical machining requires consideration and evaluation of this factor’s influence onto the operating performance of components. Since electrochemical machining is performed at small gaps, and hydrogen release is very intensive on electrodes, favourable conditions for the hydriding process are developed. The work describes a profound theoretical study of this process with proposing technological methods to reduce hydriding.

  6. Solid hydrides as hydrogen storage reservoirs; Hidruros solidos como acumuladores de hidrogeno

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, A.; Sanchez, C.; Friedrichs, O.; Ares, J. R.; Leardini, F.; Bodega, J.; Fernandez, J. F.


    Metal hydrides as hydrogen storage materials are briefly reviewed in this paper. Fundamental properties of metal-hydrogen (gas) system such as Pressure-Composition-Temperature (P-C-T) characteristics are discussed on the light of the metal-hydride thermodynamics. Attention is specially paid to light metal hydrides which might have application in the car and transport sector. The pros and cons of MgH{sub 2} as a light material are outlined. Researches in course oriented to improve the behaviour of MgH{sub 2} are presented. Finally, other very promising alternative materials such as Al compounds (alanates) or borohydrides as light hydrogen accumulators are also considered. (Author)

  7. The storage of hydrogen in the form of metal hydrides: An application to thermal engines (United States)

    Gales, C.; Perroud, P.


    The possibility of using LaNi56, FeTiH2, or MgH2 as metal hydride storage sytems for hydrogen fueled automobile engines is discussed. Magnesium copper and magnesium nickel hydrides studies indicate that they provide more stable storage systems than pure magnesium hydrides. Several test engines employing hydrogen fuel have been developed: a single cylinder motor originally designed for use with air gasoline mixture; a four-cylinder engine modified to run on an air hydrogen mixture; and a gas turbine.

  8. Hydrogen Storage Engineering Center of Excellence Metal Hydride Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Motyka, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    The Hydrogen Storage Engineering Center of Excellence (HSECoE) was established in 2009 by the U.S. Department of Energy (DOE) to advance the development of materials-based hydrogen storage systems for hydrogen-fueled light-duty vehicles. The overall objective of the HSECoE is to develop complete, integrated system concepts that utilize reversible metal hydrides, adsorbents, and chemical hydrogen storage materials through the use of advanced engineering concepts and designs that can simultaneously meet or exceed all the DOE targets. This report describes the activities and accomplishments during Phase 1 of the reversible metal hydride portion of the HSECoE, which lasted 30 months from February 2009 to August 2011. A complete list of all the HSECoE partners can be found later in this report but for the reversible metal hydride portion of the HSECoE work the major contributing organizations to this effort were the United Technology Research Center (UTRC), General Motors (GM), Pacific Northwest National Laboratory (PNNL), the National Renewable Energy Laboratory (NREL) and the Savannah River National Laboratory (SRNL). Specific individuals from these and other institutions that supported this effort and the writing of this report are included in the list of contributors and in the acknowledgement sections of this report. The efforts of the HSECoE are organized into three phases each approximately 2 years in duration. In Phase I, comprehensive system engineering analyses and assessments were made of the three classes of storage media that included development of system level transport and thermal models of alternative conceptual storage configurations to permit detailed comparisons against the DOE performance targets for light-duty vehicles. Phase 1 tasks also included identification and technical justifications for candidate storage media and configurations that should be capable of reaching or exceeding the DOE targets. Phase 2 involved bench-level testing and

  9. Oxidation of phenyl and hydride ligands of bis(pentamethylcyclopentadienyl)hafnium derivatives by nitrous oxide via selective oxygen atom transfer reactions: insights from quantum chemistry calculations. (United States)

    Xie, Hujun; Liu, Chengcheng; Yuan, Ying; Zhou, Tao; Fan, Ting; Lei, Qunfang; Fang, Wenjun


    The mechanisms for the oxidation of phenyl and hydride ligands of bis(pentamethylcyclopentadienyl)hafnium derivatives (Cp* = η(5)-C5Me5) by nitrous oxide via selective oxygen atom transfer reactions have been systematically studied by means of density functional theory (DFT) calculations. On the basis of the calculations, we investigated the original mechanism proposed by Hillhouse and co-workers for the activation of N2O. The calculations showed that the complex with an initial O-coordination of N2O to the coordinatively unsaturated Hf center is not a local minimum. Then we proposed a new reaction mechanism to investigate how N2O is activated and why N2O selectively oxidize phenyl and hydride ligands of . Frontier molecular orbital theory analysis indicates that N2O is activated by nucleophilic attack by the phenyl or hydride ligand. Present calculations provide new insights into the activation of N2O involving the direct oxygen atom transfer from nitrous oxide to metal-ligand bonds instead of the generally observed oxygen abstraction reaction to generate metal-oxo species.

  10. Shielding efficiency of metal hydrides and borohydrides in fusion reactors

    DEFF Research Database (Denmark)

    Singh, Vishvanath P.; Badiger, Nagappa M.; Gerward, Leif


    at energies 0.015 MeV to15 MeV, and for penetration depths up to 40 mean free paths. Fast-neutron shielding efficiency has been characterized by the effective neutron removal cross-section. It is shown that ZrH2 and VH2 are very good shielding materials for gamma rays and fast neutrons due to their suitable......Mass attenuation coefficients, mean free paths and exposure buildup factors have been used to characterize the shielding efficiency of metal hydrides and borohydrides, with high density of hydrogen. Gamma ray exposure buildup factors were computed using five-parameter geometric progression fitting...... combination of low-and high-Z elements. The present work should be useful for the selection and design of blankets and shielding, and for dose evaluation for components in fusion reactors....

  11. Shielding efficiency of metal hydrides and borohydrides in fusion reactors

    Directory of Open Access Journals (Sweden)

    Singh Vishvanath P.


    Full Text Available Mass attenuation coefficients, mean free paths and exposure buildup factors have been used to characterize the shielding efficiency of metal hydrides and borohydrides, with high density of hydrogen. Gamma ray exposure buildup factors were computed using five-parameter geometric progression fitting at energies 0.015 MeV to15 MeV, and for penetration depths up to 40 mean free paths. Fast-neutron shielding efficiency has been characterized by the effective neutron removal cross-section. It is shown that ZrH2 and VH2 are very good shielding materials for gamma rays and fast neutrons due to their suitable combination of low- and high-Z elements. The present work should be useful for the selection and design of blankets and shielding, and for dose evaluation for components in fusion reactors.

  12. Final report for the DOE Metal Hydride Center of Excellence.

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jay O.; Klebanoff, Leonard E.


    This report summarizes the R&D activities within the U.S. Department of Energy Metal Hydride Center of Excellence (MHCoE) from March 2005 to June 2010. The purpose of the MHCoE has been to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE 2010 and 2015 system goals for hydrogen storage materials. The MHCoE combines three broad areas: mechanisms and modeling (which provide a theoretically driven basis for pursuing new materials), materials development (in which new materials are synthesized and characterized) and system design and engineering (which allow these new materials to be realized as practical automotive hydrogen storage systems). This Final Report summarizes the organization and execution of the 5-year research program to develop practical hydrogen storage materials for light duty vehicles. Major results from the MHCoE are summarized, along with suggestions for future research areas.

  13. Magnetic studies of nickel hydride nanoparticles embedded in chitosan matrix (United States)

    Araújo-Barbosa, S.; Morales, M. A.


    In this work we present a method to produce NiH (β-NiH phase) nanoparticles from Ni-Cu solid solution. The reduction of Ni2+ and Cu2+ occurred at high temperatures and in presence of glutaraldehyde, citric acid and chitosan biopolymer. The samples are mainly composed of Ni and NiH phases with particles sizes ranging from 9 to 27 nm. DC magnetization studies reveal the presence of hydrogen-poor nickel hydride phase (α-NiH phase) which enhances the saturation magnetization at temperatures below 50 K. Stability of samples stored in air after 8 months was verified, and thermal treatment at 350 oC in presence of air transformed the samples to Ni and Cu oxides. Furthermore, we present a discussion regarding the mechanism of Ni2+ and Cu2+ chemical reduction.

  14. Modeling of hydride precipitation and re-orientation

    Energy Technology Data Exchange (ETDEWEB)

    Tikare, Veena [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Weck, Philippe F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mitchell, John Anthony [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)


    In this report, we present a thermodynamic-­based model of hydride precipitation in Zr-based claddings. The model considers the state of the cladding immediately following drying, after removal from cooling-pools, and presents the evolution of precipitate formation upon cooling as follows: The pilgering process used to form Zr-based cladding imparts strong crystallographic and grain shape texture, with the basal plane of the hexagonal α-Zr grains being strongly aligned in the rolling-­direction and the grains are elongated with grain size being approximately twice as long parallel to the rolling direction, which is also the long axis of the tubular cladding, as it is in the orthogonal directions.

  15. Hydrides reorientation investigation of high burn-up PWR fuel cladding (United States)

    Valance, Stéphane; Bertsch, Johannes


    The direction of formation of hydride in fuel cladding tube is a major issue for the assessment of the cladding remaining ductility after service. This behavior is quite well known for fresh material, but few results exist for irradiated material. The reorientation behavior of a Zircaloy-4 fuel cladding (AREVA duplex DX-D4) at a burn-up of around 72 GWd t-1 is investigated here. The increase of the fraction of reoriented hydrides through repeated thermo-mechanical loading is inspected; as well, the possibility to recover a state with a minimized quantity of reoriented hydrides is tested using pure thermal loading cycles. The study is completed by a qualitative assessment of the hydrogen density in the duplex layer, where a dependence of the hydrides density on the hoop stress state is observed.

  16. Hydride reorientation in Zircaloy-4 examined by in situ synchrotron X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Weekes, H.E. [Department of Materials, Royal School of Mines, Imperial College London, Prince Consort Road, London SW7 2BP (United Kingdom); Jones, N.G. [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Lindley, T.C. [Department of Materials, Royal School of Mines, Imperial College London, Prince Consort Road, London SW7 2BP (United Kingdom); Dye, D., E-mail: [Department of Materials, Royal School of Mines, Imperial College London, Prince Consort Road, London SW7 2BP (United Kingdom)


    The phenomenon of stress-reorientation has been investigated using in situ X-ray diffraction during the thermomechanical cycling of hydrided Zircaloy-4 tensile specimens. Results have shown that loading along a sample’s transverse direction (TD) leads to a greater degree of hydride reorientation when compared to rolling direction (RD)-aligned samples. The elastic lattice micro-strains associated with radially oriented hydrides have been revealed to be greater than those oriented circumferentially, a consequence of strain accommodation. Evidence of hydride redistribution after cycling, to α-Zr grains oriented in a more favourable orientation when under an applied stress, has also been observed and its behaviour has been found to be highly dependent on the loading axis. Finally, thermomechanical loading across multiple cycles has been shown to reduce the difference in terminal solid solubility of hydrogen during dissolution (TSS{sub D,H}) and precipitation (TSS{sub P,H}).

  17. In situ probing of surface hydrides on hydrogenated amorphous silicon using attenuated total reflection infrared spectroscopy

    CERN Document Server

    Kessels, W M M; Sanden, M C M; Aydil, E S


    An in situ method based on attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) is presented for detecting surface silicon hydrides on plasma deposited hydrogenated amorphous silicon (a-Si:H) films and for determining their surface concentrations. Surface silicon hydrides are desorbed by exposing the a-Si:H films to low energy ions from a low density Ar plasma and by comparing the infrared spectrum before and after this low energy ion bombardment, the absorptions by surface hydrides can sensitively be separated from absorptions by bulk hydrides incorporated into the film. An experimental comparison with other methods that utilize isotope exchange of the surface hydrogen with deuterium showed good agreement and the advantages and disadvantages of the different methods are discussed. Furthermore, the determination of the composition of the surface hydrogen bondings on the basis of the literature data on hydrogenated crystalline silicon surfaces is presented, and quantification of the h...

  18. Solvation dynamics and energetics of intramolecular hydride transfer reactions in biomass conversion. (United States)

    Mushrif, Samir H; Varghese, Jithin J; Krishnamurthy, Chethana B


    Hydride transfer changes the charge structure of the reactant and thus, may induce reorientation/reorganization of solvent molecules. This solvent reorganization may in turn alter the energetics of the reaction. In the present work, we investigate the intramolecular hydride transfer by taking Lewis acid catalyzed glucose to fructose isomerization as an example. The C2-C1 hydride transfer is the rate limiting step in this reaction. Water and methanol are used as solvents and hydride transfer is simulated in the presence of explicit solvent molecules, treated quantum mechanically and at a finite temperature, using Car-Parrinello molecular dynamics (CPMD) and metadynamics. Activation free energy barrier for hydride transfer in methanol is found to be 50 kJ mol(-1) higher than that in water. In contrast, in density functional theory calculations, using an implicit solvent environment, the barriers are almost identical. Analysis of solvent dynamics and electronic polarization along the molecular dynamics trajectory and the results of CPMD-metadynamics simulation of the hydride transfer process in the absence of any solvent suggest that higher barrier in methanol is a result of non-equilibrium solvation. Methanol undergoes electronic polarization during the hydride transfer step. However, its molecular orientational relaxation is a much slower process that takes place after the hydride transfer, over an extended timescale. This results in non-equilibrium solvation. Water, on the other hand, does not undergo significant electronic polarization and thus, has to undergo minimal molecular reorientation to provide near equilibrium solvation to the transition state and an improved equilibrium solvation to the post hydride shift product state. Hence, the hydride transfer step is also observed to be exergonic in water and endergonic in methanol. The aforementioned explanation is juxtaposed to enzyme catalyzed charge transfer reactions, where the enhanced solvation of the

  19. Proton and hydride affinities in excited states: magnitude reversals in proton and hydride affinities between the lowest singlet and triplet states of annulenyl and benzannulenyl anions and cations

    DEFF Research Database (Denmark)

    Rosenberg, Martin; Ottosson, Henrik; Kilså, Kristine


    Aromaticity has importance for proton and hydride affinities in the singlet ground state (S(0)) of annulenyl anions and cations so that, e.g., cyclopentadiene is an acidic hydrocarbon. For the lowest pipi* excited triplet state (T(1)), Baird's rule concludes that annulenes with 4n pi......-electrons are aromatic and those with 4n+2 pi-electrons are antiaromatic, opposite to Huckel's rule for aromaticity in S(0). Our hypothesis is now that the relative magnitudes of proton and hydride affinities of annulenyl anions and cations reverts systematically as one goes from S(0) to T(1) as a result of the opposite...... electron counting rules for aromaticity in the two states. Using quantum chemical calculations at the G3(MP2)//(U)B3LYP/6-311+G(d,p) level we have examined the validity of this hypothesis for eight proton and eight hydride addition reactions of anions and cations, respectively, of annulenyl...

  20. Photogeneration of Hydride Donors and Their Use Toward CO2 Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Fujita,E.; Muckerman, J.T.; Polyansky, D.E.


    Despite substantial effort, no one has succeeded in efficiently producing methanol from CO2 using homogeneous photocatalytic systems. We are pursuing reaction schemes based on a sequence of hydride-ion transfers to carry out stepwise reduction of CO2 to methanol. We are using hydride-ion transfer from photoproduced C-H bonds in metal complexes with bio-inspired ligands (i.e., NADH-like ligands) that are known to store one proton and two electrons.

  1. CO2 reduction or HCO2(-) oxidation? Solvent-dependent thermochemistry of a nickel hydride complex. (United States)

    Ceballos, Bianca M; Tsay, Charlene; Yang, Jenny Y


    The hydricity (ΔGH(-)) of a newly synthesized nickel hydride was experimentally determined in acetonitrile (50.6 kcal mol(-1)), dimethyl sulfoxide (47.1 kcal mol(-1)), and water (22.8 kcal mol(-1)). The hydricity values indicate hydride transfer from [HNi(TMEPE)2][BF4] (TMEPE = 1,2-bis[di(methoxyethyl)phosphino]ethane) to CO2 is exergonic in water and endergonic in the organic solvents.

  2. Influence of Milling Conditions on the Hydriding Properties of Mg-C Nanocomposites

    Directory of Open Access Journals (Sweden)

    Hristina Stoyadinova


    Full Text Available Mg75 at.%, CB25 at.% (CB: carbon black composites were synthesized at different ball milling conditions (milling energy, milling duration, and environment and their hydriding properties were characterized by high-pressure DSC. The SEM observations revealed that the samples consist of 5–15 μm Mg particles, surrounded and in some cases coated by carbon particles. X-ray diffraction analysis showed that the Mg phase of all as-obtained composite powders is nanocrystalline with average crystallite size in the range 20–30 nm, depending on the milling conditions. The best hydriding properties, expressed in low-temperature hydriding (below 150°C and improved cycle life, showed the composites milled at dry conditions. This is obviously due mainly to the successful Mg surface protection by the carbon. Additional decrease of the hydriding temperature (<100°C was achieved applying higher-energy milling, but at the same time the cycling stability deteriorated, due to the extremely fine particles and microstructure achieved under these conditions. The composites milled in the presence of heptane showed rapid capacity decline during cycling as well. The observed difference in the hydriding behavior of the Mg-CB composites is attributed to the different coating efficiency of the carbon milled under different conditions with Mg, which is supposed to protect magnesium from oxidation and plays a catalytic role for the hydriding reaction.

  3. Investigation of Lithium Metal Hydride Materials for Mitigation of Deep Space Radiation (United States)

    Rojdev, Kristina; Atwell, William


    Radiation exposure to crew, electronics, and non-metallic materials is one of many concerns with long-term, deep space travel. Mitigating this exposure is approached via a multi-faceted methodology focusing on multi-functional materials, vehicle configuration, and operational or mission constraints. In this set of research, we are focusing on new multi-functional materials that may have advantages over traditional shielding materials, such as polyethylene. Metal hydride materials are of particular interest for deep space radiation shielding due to their ability to store hydrogen, a low-Z material known to be an excellent radiation mitigator and a potential fuel source. We have previously investigated 41 different metal hydrides for their radiation mitigation potential. Of these metal hydrides, we found a set of lithium hydrides to be of particular interest due to their excellent shielding of galactic cosmic radiation. Given these results, we will continue our investigation of lithium hydrides by expanding our data set to include dose equivalent and to further understand why these materials outperformed polyethylene in a heavy ion environment. For this study, we used HZETRN 2010, a one-dimensional transport code developed by NASA Langley Research Center, to simulate radiation transport through the lithium hydrides. We focused on the 1977 solar minimum Galactic Cosmic Radiation environment and thicknesses of 1, 5, 10, 20, 30, 50, and 100 g/cm2 to stay consistent with our previous studies. The details of this work and the subsequent results will be discussed in this paper.

  4. First-principles calculations of niobium hydride formation in superconducting radio-frequency cavities

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Denise C.; Cooley, Lance D.; Seidman, David N.


    Niobium hydride is suspected to be a major contributor to degradation of the quality factor of niobium superconducting radio-frequency (SRF) cavities. In this study, we connect the fundamental properties of hydrogen in niobium to SRF cavity performance and processing. We modeled several of the niobium hydride phases relevant to SRF cavities and present their thermodynamic, electronic, and geometric properties determined from calculations based on density-functional theory. We find that the absorption of hydrogen from the gas phase into niobium is exothermic and hydrogen becomes somewhat anionic. The absorption of hydrogen by niobium lattice vacancies is strongly preferred over absorption into interstitial sites. A single vacancy can accommodate six hydrogen atoms in the symmetrically equivalent lowest-energy sites and additional hydrogen in the nearby interstitial sites affected by the strain field: this indicates that a vacancy can serve as a nucleation center for hydride phase formation. Small hydride precipitates may then occur near lattice vacancies upon cooling. Vacancy clusters and extended defects should also be enriched in hydrogen, potentially resulting in extended hydride phase regions upon cooling. We also assess the phase changes in the niobium-hydrogen system based on charge transfer between niobium and hydrogen, the strain field associated with interstitial hydrogen, and the geometry of the hydride phases. The results of this study stress the importance of not only the hydrogen content in niobium, but also the recovery state of niobium for the performance of SRF cavities.

  5. Effects of outgassing of loader chamber walls on hydriding of thin films for commercial applications

    Energy Technology Data Exchange (ETDEWEB)

    Provo, James L., E-mail: [Consultant, J.L. Provo Consulting, Trinity, Florida 34655-7179 (United States)


    An important aspect of understanding industrial processing is to know the characteristics of the materials used in such processes. A study was performed to determine the effects of hydriding chamber material on the degree of hydriding for the commercial production of thin film hydride targets for various research universities, commercial companies, and government national laboratories. The goal was to increase the degree of hydriding of various thin film hydrides and to study the vacuum environment during air-exposure hydriding. For this purpose, dynamic residual gas analysis during deuterium gas hydride processing was utilized with erbium thin films, employing a special set-up for direct dynamic hydride gas sampling during processing at elevated temperature and full loading gas pressure. Complete process data for (1) a copper–(1.83 wt. %)beryllium wet hydrogen fired passivated (600 °C–1 h) externally heated pipe hydriding chamber are reported. Dynamic residual gas analysis comparisons during hydriding are presented for hydriding chambers made from (2) alumina (99.8 wt. %), (3) copper (with an interior aluminum coating ∼10 k Å thick, and (4) for a stainless-steel air-fired passivated (900 °C–1 h) chamber. Dynamic data with deuterium gas in the chamber at the hydriding temperature (450 °C) showed the presence and growth of water vapor (D{sub 2}O) and related mixed ion species(H{sub 2}O{sup +}, HDO{sup +}, D{sub 2}O{sup +}, and OD{sup +}) from hydrogen isotope exchange reactions during the 1 h process time. Peaks at mass-to-charge ratios (i.e., m/e) of 12(C{sup +}), 16(CD{sub 2}{sup +}), 17(CHD{sub 2}{sup +}), and 18(CD{sub 3}{sup +}, OD{sup +}) increased for approximately the first half hour of a 1 h hydriding process and then approach steady state. Mass-to-charge peaks at 19(HDO{sup +}) and 20(D{sub 2}O{sup +}) continue to increase throughout the process cycle. Using the m/e = 20 (D{sub 2}O{sup +}) peak intensity from chamber (1

  6. Complex Hydride Compounds with Enhanced Hydrogen Storage Capacity

    Energy Technology Data Exchange (ETDEWEB)

    Mosher, Daniel A.; Opalka, Susanne M.; Tang, Xia; Laube, Bruce L.; Brown, Ronald J.; Vanderspurt, Thomas H.; Arsenault, Sarah; Wu, Robert; Strickler, Jamie; Anton, Donald L.; Zidan, Ragaiy; Berseth, Polly


    The United Technologies Research Center (UTRC), in collaboration with major partners Albemarle Corporation (Albemarle) and the Savannah River National Laboratory (SRNL), conducted research to discover new hydride materials for the storage of hydrogen having on-board reversibility and a target gravimetric capacity of ≥ 7.5 weight percent (wt %). When integrated into a system with a reasonable efficiency of 60% (mass of hydride / total mass), this target material would produce a system gravimetric capacity of ≥ 4.5 wt %, consistent with the DOE 2007 target. The approach established for the project combined first principles modeling (FPM - UTRC) with multiple synthesis methods: Solid State Processing (SSP - UTRC), Solution Based Processing (SBP - Albemarle) and Molten State Processing (MSP - SRNL). In the search for novel compounds, each of these methods has advantages and disadvantages; by combining them, the potential for success was increased. During the project, UTRC refined its FPM framework which includes ground state (0 Kelvin) structural determinations, elevated temperature thermodynamic predictions and thermodynamic / phase diagram calculations. This modeling was used both to precede synthesis in a virtual search for new compounds and after initial synthesis to examine reaction details and options for modifications including co-reactant additions. The SSP synthesis method involved high energy ball milling which was simple, efficient for small batches and has proven effective for other storage material compositions. The SBP method produced very homogeneous chemical reactions, some of which cannot be performed via solid state routes, and would be the preferred approach for large scale production. The MSP technique is similar to the SSP method, but involves higher temperature and hydrogen pressure conditions to achieve greater species mobility. During the initial phases of the project, the focus was on higher order alanate complexes in the phase space

  7. The survey of Neutron moderating properties of zirconium hydride nanoparticles (ZrH2) in the reactors of nuclear powerhouse


    Ahmad Nozad Golikand; Hossein Alibakhshi


    Metal hydrides as a Neutron Moderator (NMs) have effective and impressive application in nuclear reactors. Unquestionably, Retarder should be close to the atomic mass of the neutron to be able to reduce its energy with no interaction with the neutrons. The hydrogen atom nucleons have the atomic Mass close to the Neutron. Surprisingly, Metal hydrides can absorb a high percentage of hydrogen. Metal Hydrides have very good properties at high temperatures and can also maintain it even at higher t...

  8. Metal hydrides: an innovative and challenging conversion reaction anode for lithium-ion batteries

    Directory of Open Access Journals (Sweden)

    Luc Aymard


    Full Text Available The state of the art of conversion reactions of metal hydrides (MH with lithium is presented and discussed in this review with regard to the use of these hydrides as anode materials for lithium-ion batteries. A focus on the gravimetric and volumetric storage capacities for different examples from binary, ternary and complex hydrides is presented, with a comparison between thermodynamic prediction and experimental results. MgH2 constitutes one of the most attractive metal hydrides with a reversible capacity of 1480 mA·h·g−1 at a suitable potential (0.5 V vs Li+/Li0 and the lowest electrode polarization (2, TiH2, complex hydrides Mg2MHx and other Mg-based hydrides. The reversible conversion reaction mechanism of MgH2, which is lithium-controlled, can be extended to others hydrides as: MHx + xLi+ + xe− in equilibrium with M + xLiH. Other reaction paths—involving solid solutions, metastable distorted phases, and phases with low hydrogen content—were recently reported for TiH2 and Mg2FeH6, Mg2CoH5 and Mg2NiH4. The importance of fundamental aspects to overcome technological difficulties is discussed with a focus on conversion reaction limitations in the case of MgH2. The influence of MgH2 particle size, mechanical grinding, hydrogen sorption cycles, grinding with carbon, reactive milling under hydrogen, and metal and catalyst addition to the MgH2/carbon composite on kinetics improvement and reversibility is presented. Drastic technological improvement in order to the enhance conversion process efficiencies is needed for practical applications. The main goals are minimizing the impact of electrode volume variation during lithium extraction and overcoming the poor electronic conductivity of LiH. To use polymer binders to improve the cycle life of the hydride-based electrode and to synthesize nanoscale composite hydride can be helpful to address these drawbacks. The development of high-capacity hydride anodes should be inspired by the emergent

  9. Reduction of carbon monoxide by binuclear tantalum hydride complexes

    Energy Technology Data Exchange (ETDEWEB)

    Belmonte, P.A.; Cloke, F.G.; Schrock, R.R.


    (TaCp'Cl/sub 2/H)/sub 2/ (Cp' = n/sup 5/-C/sub 5/Me/sub 4/Et) reacts with CO to give yellow, crystalline Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(CHO); the hydride bridges the two metals as does the side-on bonded formyl fragment. When PMe=3 is added to Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(CHO) the formyl C-O bond is broken to give Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(O)(CHPMe/sub 3/). The reaction of a mixture of (TaCP'Cl/sub 2/H)/sub 2/ and (TaCp'Cl/sub 2/D)/sub 2/ with CO followed by PMe/sub 3/ to give only a mixtue of Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(O)(CHPMe/sub 3/) and Ta/sub 2/Cp'/sub 2/Cl/sub 4/(D)(O)(CDPMe/sub 3/) suggests that the dimer does not fragment when it reacts with CO. This was confirmed by a crossover experiment involving (TaCp'Cl/sub 2/H)/sub 2/ and (TaCp/sup s/Cl/sub 2/H)/sub 2/ (Cp/sup s/ = n/sup 5/-1,3-C/sub 5/H/sub 3/(SiMe/sub 3/)/sub 2/). (TaCp'Cl/sub 2/H/sub 2/ forms a green, diamagnetic pyridine adduct that contains two inequivalent hydride ligands. (TaCp'Cl/sub 2/H)/sub 2/ forms an unstable, purple CO adduct that shows a terminally bound CO band (v/sub CO/ = 1939 cm/sup -1/) and two different hydride bands (v/sub MH/ = 1560 and 1599 cm/sup -1/) in the IR spectrum of a thin film at -78/sup 0/C, and a singlet ascribed to the carbonyl carbon atom at 238 ppm in the /sup 13/C NMR spectrum. (TaCp'Cl/sub 2/H)/sub 2/(CO) decomposes rapidly in solution or in the solid state at -30/sup 0/C to give Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(CHO) quantitatively. Methane is formed in approx.70% yield when Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(CHO) is treated with AlCl/sub 3/ under molecular hydrogen. Methanol is formed in high yield when Ta/sub 2/Cp'/sub 2/Cl/sub 4/(H)(CHO) is hydrolyzed with aqueous HCl.

  10. Efficient Hydrogenolysis of Alkanes at Low Temperature and Pressure Using Tantalum Hydride on MCM-41, and a Quantum Chemical Study

    KAUST Repository

    Polshettiwar, Vivek


    Hydrogenolysis of hydrocarbons is of considerable technological importance for applications such as the hydroprocessing of petrochemical feedstocks to generate high-value and useful chemicals and fuels. We studied the catalytic activity of tantalum hydride supported on MCM-41 for the hydrogenolysis of alkanes at low temperature and low atmospheric pressure in a dynamic reactor. The reactions proceed with good turnover numbers, and the catalyst could be reused for several times, which makes the overall catalytic process sustainable. We derived the plausible mechanism by using DFT calculations and identified the preferred pathways by the analysis of potential energy surface. Our results and the proposed reaction mechanism demonstrate the viability of the "catalyst-by-design" approach. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Doped Sodium Aluminum Hydride: Fundamental Studies and Practical Development of a Promising New Hydrogen Storage Material (United States)

    Jensen, Craig


    In 1997, Bogdanovic and Schwickardi reported that the elimination of hydrogen from solid NaAlH4 is markedly accelerated and rendered reversible under moderate conditions upon mixing the hydride with a few mole percent of selected transition metal complexes. We found that doping the hydride through an alternative, mechanical milling method leads to considerable improvements in the practical hydrogen cycling performance of the hydride. It now appears that a variation of the doped hydride could possibly be developed as a viable means for the onboard storage of hydrogen. However, no dopant precursors have been found that give a greater kinetic enhancement than those cataloged in Bogdanovic's original, 1995 patent. Similarly, only the sodium and mixed sodium, lithium salts of the alanates have been found undergo largely reversible dehydrogenation under moderate conditions upon doping. This lack of progress is surprising in view of the recent "gold rush" flurry of activity that has been direct towards the development of alanates as practical onboard hydrogen carriers. Clearly, these efforts have been handicapped by a lack of understanding of the nature and mechanism of action the dopants. We have therefore initiated efforts to elucidate the fundamental basis of the remarkable hydrogen storage properties of this material. Our efforts have pointed to a model of the material in which the dopants are substituted into the bulk hydride lattice. A detailed version of this model has emerged from our recent infra red, Raman, and electron paramagnetic resonance spectroscopic studies as well as neutron diffraction, inelastic neutron scattering, and kinetic investigations of the doped hydride. The results of these studies will be presented and discussed in terms of their relationship to our "substitutional" model of the doped hydride.

  12. Generator. Generator

    Energy Technology Data Exchange (ETDEWEB)

    Knoedler, R.; Bossmann, H.P.


    The invention refers to a thermo-electric generator, whose main part is a sodium concentration cell. In conventional thermo-electric generators of this kind, the sodium moving from a hot space to a colder space must be transported back to the hot space via a circulation pipe and a pump. The purpose of the invention is to avoid the disadvantages of this return transport. According to the invention, the thermo-electric generator is supported so that it can rotate, so that the position of each space relative to its propinquity to the heat source can be changed at any time.

  13. Influence of hydrides orientation on strain, damage and failure of hydrided zircaloy-4; Influence de l'orientation des hydrures sur les modes de deformation, d'endommagement et de rupture du zircaloy-4 hydrure

    Energy Technology Data Exchange (ETDEWEB)

    Racine, A


    In pressurized water reactors of nuclear power plants, fuel pellets are contained in cladding tubes, made of Zirconium alloy, for instance Zircaloy-4. During their life in the primary water of the reactor (155 bars, 300 C), cladding tubes are oxidized and consequently hydrided. A part of the hydrogen given off precipitates as Zirconium hydrides in the bulk material and embrittles the material. This embrittlement depends on many parameters, among which hydrogen content and orientation of hydrides with respect to the applied stress. This investigation is devoted to the influence of the orientation of hydrides with respect to the applied stress on strain, damage and failure mechanisms. Macroscopic and SEM in-situ ring tensile tests are performed on cladding tube material (unirradiated cold worked stress-relieved Zircaloy-4) hydrided with about 200 and 500 wppm hydrogen, and with different main hydrides orientation: either parallel or perpendicular to the circumferential tensile direction. We get the mechanical response of the material as a function of hydride orientation and hydrogen content and we investigate the deformation, damage and failure mechanisms. In both cases, digital image correlation techniques are used to estimate local and global strain distributions. Neither the tensile stress-strain response nor the global and local strain modes are significantly affected by hydrogen content or hydride orientation, but the failure modes are strongly modified. Indeed, only 200 wppm radial hydrides embrittle Zy-4: sample fail in the elastic domain at about 350 MPa before strain bands could develop; whereas in other cases sample reach at least 750 MPa before necking and final failure, in ductile or brittle mode. To model this particular heterogeneous material behavior, a non-coupled damage approach which takes into account the anisotropic distribution of the hydrides is proposed. Its parameters are identified from the macroscopic strain field measurements and a

  14. Tunnel Junction Development Using Hydride Vapor Phase Epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Ptak, Aaron J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Simon, John D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schulte, Kevin L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Nikhil [National Renewable Energy Laboratory (NREL), Golden, CO (United States)


    We demonstrate for the first time III-V tunnel junctions grown using hydride vapor phase epitaxy (HVPE) with peak tunneling currents >8 A/cm2, sufficient for operation of a multijunction device to several hundred suns of concentration. Multijunction solar cells rely on tunneling interconnects between subcells to enable series connection with minimal voltage loss, but tunnel junctions have never been shown using the HVPE growth method. HVPE has recently reemerged as a low-cost growth method for high-quality III-V materials and devices, including the growth of high-efficiency III-V solar cells. We previously showed single-junction GaAs solar cells with conversion efficiencies of ~24% with a path forward to equal or exceed the practical efficiency limits of crystalline Si. Moving to a multijunction device structure will allow for even higher efficiencies with minimal impact on cost, necessitating the development of tunnel interconnects. Here, we demonstrate the performance of both isolated HVPE-grown tunnel junctions, as well as single-junction GaAs solar cell structures with a tunnel junction incorporated into the contact region. We observe no degradation in device performance compared to a structure without the added junction.

  15. Reaction between magnesium ammine complex compound and lithium hydride

    Energy Technology Data Exchange (ETDEWEB)

    Tsubota, Masami [Institute for Advanced Materials Research, Hiroshima University, Higashi-Hiroshima 739-8530 (Japan); Hino, Satoshi; Oomatsu, Chie [Department of Quantum Matter, ADSM, Hiroshima University, Higashi-Hiroshima 739-8530 (Japan); Fujii, Hironobu; Yamana, Masashi [Hiroshima City Industrial Promotion Center, Advanced Science and Technology Laboratory, Hiroshima 730-0052 (Japan); Ichikawa, Takayuki; Kojima, Yoshitsugu [Institute for Advanced Materials Research, Hiroshima University, Higashi-Hiroshima 739-8530 (Japan); Department of Quantum Matter, ADSM, Hiroshima University, Higashi-Hiroshima 739-8530 (Japan)


    The possibility of using ammonia as a hydrogen carrier is examined for the reaction between magnesium ammine complex MgCl{sub 2}(NH{sub 3}){sub 6} and lithium hydride LiH. Sample was milled at low temperature of -40 C to avoid decomposition of MgCl{sub 2}(NH{sub 3}){sub 6} during the milling. The effects of milling time, milling speed (revolutions per minute), and catalysts on hydrogen storage properties were investigated by thermogravimetry, thermal desorption mass spectroscopy, and X-ray diffraction experiments. Experimental results indicated that a milled composite of Mg(NH{sub 3}){sub 6}Cl{sub 2} and catalyzed-LiH desorbed the {proportional_to}100% H{sub 2} gas even at 125 C in a closed system. The reverse reaction also proceeded by separately cooling MgCl{sub 2} at lower temperature than 100 C and heating LiNH{sub 2} at 300 C in the closed system. (author)

  16. Superhalogens as Building Blocks of Complex Hydrides for Hydrogen Storage

    CERN Document Server

    Srivastava, Ambrish Kumar


    Superhalogens are species whose electron affinity (EA) or vertical detachment energy (VDE) exceed to those of halogen. These species typically consist of a central electropositive atom with electronegative ligands. The EA or VDE of species can be further increased by using superhalogen as ligands, which are termed as hyperhalogen. Having established BH4- as a superhalogen, we have studied BH4-x(BH4)x- (x = 1 to 4) hyperhalogen anions and their Li-complexes, LiBH4-x(BH4)x using density functional theory. The VDE of these anions is larger than that of BH4-, which increases with the increase in the number of peripheral BH4 moieties (x). The hydrogen storage capacity of LiBH4-x(BH4)x complexes is higher but binding energy is smaller than that of LiBH4, a typical complex hydride. The linear correlation between dehydrogenation energy of LiBH4-x(BH4)x complexes and VDE of BH4-x(BH4)x- anions is established. These complexes are found to be thermodynamically stable against dissociation into LiBH4 and borane. This stud...

  17. A novel predictive model for formation enthalpies of Si and Ge hydrides with propane- and butane-like structures. (United States)

    Weng, C; Kouvetakis, J; Chizmeshya, A V G


    Butane- and propane-like silicon-germanium hydrides and chlorinated derivatives represent a new class of precursors for the fabrication of novel metastable materials at low-temperature regimes compatible with selective growth and commensurate with the emerging demand for the reduced thermal budgets of complementary metal oxide semiconductor integration. However, predictive simulation studies of the growth process and reaction mechanisms of these new compounds, needed to accelerate their deployment and fine-tune the unprecedented low-temperature and low-pressure synthesis protocols, require experimental thermodynamic data, which are currently unavailable. Furthermore, traditional quantum chemistry approaches lack the accuracy needed to treat large molecules containing third-row elements such as Ge. Accordingly, here we develop a method to accurately predict the formation enthalpy of these compounds using atom-wise corrections for Si, Ge, Cl, and H. For a test set of 15 well-known hydrides of Si and Ge and their chlorides, such as Si(3)H(8), Ge(2)H(6), SiGeH(6), SiHCl(3), and GeCl(4), our approach reduces the deviations between the experimental and predicted formation enthalpies obtained from complete basis set (CBS-QB3), G2, and B3LPY thermochemistry to levels of 1-3 kcal/mol, or a factor of ∼5 over the corresponding uncorrected values. We show that our approach yields results comparable or better than those obtained using homodesmic reactions while circumventing the need for thermochemical data of the associated reaction species. Optimized atom-wise corrections are then used to generate accurate enthalpies of formation for 39 pure Si-Ge hydrides and a selected group of 20 chlorinated analogs, of which some have recently been synthesized for the first time. Our corrected enthalpies perfectly reproduce the experimental stability trends of heavy butane-like compounds containing Ge. This is in contrast to the direct application of the CBS-QB3 method, which yields

  18. Development of nickel/metal-hydride batteries for EVs and HEVs (United States)

    Taniguchi, Akihiro; Fujioka, Noriyuki; Ikoma, Munehisa; Ohta, Akira

    This paper is to introduce the nickel/metal-hydride (Ni/MH) batteries for electric vehicles (EVs) and hybrid electric vehicles (HEVs) developed and mass-produced by our company. EV-95 for EVs enables a vehicle to drive approximately 200 km per charge. As the specific power is extremely high, more than 200 W/kg at 80% depth of discharge (DOD), the acceleration performance is equivalent to that of gasoline fuel automobiles. The life characteristic is also superior. This battery gives the satisfactory result of more than 1000 cycles in bench tests and approximately 4-year on-board driving. EV-28 developed for small EVs comprises of a compact and light battery module with high specific power of 300 W/kg at 80% DOD by introducing a new technology for internal cell connection. Meanwhile, our cylindrical battery for the HEV was adopted into the first generation Toyota Prius in 1997 which is the world's first mass-product HEV, and has a high specific power of 600 W/kg. Its life characteristic was found to be equivalent to more than 100,000 km driving. Furthermore, a new prismatic module in which six cells are connected internally was used for the second generation Prius in 2000. The prismatic battery comprises of a compact and light battery pack with a high specific power of 1000 W/kg, which is approximately 1.7 times that of conventional cylindrical batteries, as a consequence of the development of a new internal cell connection and a new current collection structure.

  19. Prediction of the thermal conductivity of metal hydrides - The inverse problem

    Energy Technology Data Exchange (ETDEWEB)

    Ghafir, Mohd Fahmi Abdul; Batcha, Mohd Faizal Mohideen [Faculty of Mechanical Engineering, University Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor (Malaysia); Raghavan, Vijay R. [Department of Mechanical Engineering, University Technology Petronas, Bandar Seri Iskander, 31750 Tronoh, Perak (Malaysia)


    With sustainability as an important and driving theme, not merely of research, but that of our existence itself, the effort in developing sustainable systems takes many directions. One of these directions is in the transport sector, particularly personal transport using hydrogen as fuel, which logically leads on to the problem of hydrogen storage. This paper deals with the prediction of the effective conductivity of beds of metal hydride for hydrogen storage. To enable modeling of the effective thermal conductivity of these systems, it is necessary to arrive at the functional dependence of the thermal conductivity of the solid hydride on its hydrogen concentration or content. This is the inverse problem in thermal conductivity of multiphase materials. Inverse methods in general are those where we start from known consequences in order to find unknown causes. Using published and known data of the effective thermal conductivity of the hydride-hydrogen assemblage, we arrive at the unknown hydride conductivity by analysis. Among the models available in the literature for determination of the effective conductivity of the bed from the properties of the constituent phases, the model of Raghavan and Martin is chosen for the analysis as it combines simplicity and physical rigor. The result is expected to be useful for predicting the thermal conductivity of hydride particles and determining the optimum heat transfer rates governing the absorption and desorption rates of hydrogen in the storage system. (author)

  20. Low and high-pressure hydriding of V-0.5at.%C

    Energy Technology Data Exchange (ETDEWEB)

    Lamb, Joshua [University of Nevada, Reno, M.S. 388, Reno, NV 89557 (United States); Chandra, Dhanesh, E-mail: dchandra@unr.ed [University of Nevada, Reno, M.S. 388, Reno, NV 89557 (United States); Coleman, Michael; Sharma, Archana; Cathey, William N. [University of Nevada, Reno, M.S. 388, Reno, NV 89557 (United States); Paglieri, Stephen N. [TDA Research, Inc., 12345 W. 52nd Ave., Wheat Ridge, CO 80033 (United States); Wermer, Joseph R. [Los Alamos National Laboratory, P.O. Box 1663, MS-C927, Los Alamos, NM 87545 (United States); Bowman, Robert C. [Jet Propulsion Laboratory, California Institute of Technology, Mail Stop 79-24, Pasadena, CA 91109 (United States); Lynch, Franklin E. [HCI, 12400 Dumont Way, Littleton, CO 80125 (United States)


    The low-pressure hydriding characteristics of V-0.5at.%C alloy were determined in this study. There are several prior reports on the pressure-composition-temperature (p-c-T) isotherms and stability of the low-pressure vanadium hydride phases (V{sub 2}H or beta{sub 1}), and of vanadium alloyed with transition elements, but there are no reports on the hydrides of V-C alloys. The thermodynamic properties of the vanadium did not change significantly with the addition of carbon. In addition to low-pressure studies on V-0.5at.%C, we also performed high-pressure studies on V{sub 2}H reversible VH reversible VH{sub 2} (beta{sub 1} reversible beta{sub 2} reversible gamma) hydrides, including thermal cycling (778 cycles) between the beta and gamma phases. Thermal cycling between VH reversible VH{sub 2} increased the pressure hysteresis. The effects of thermal cycling (4000 cycles) on the absorption and desorption isotherms of V-0.5at.%C and on the H/M ratios for the beta{sub 1}-, beta{sub 2}- and gamma-phase hydrides are also presented. There was minimal decrepitation (pulverization) of the alloy; decrepitation of the V-0.5at.%C alloy was dramatically less than that of pure vanadium.

  1. Hydrogen transmission/storage with a metal hydride/organic slurry

    Energy Technology Data Exchange (ETDEWEB)

    Breault, R.W.; Rolfe, J.; McClaine, A. [Thermo Power Corp., Waltham, MA (United States)


    Thermo Power Corporation has developed a new approach for the production, transmission, and storage of hydrogen. In this approach, a chemical hydride slurry is used as the hydrogen carrier and storage media. The slurry protects the hydride from unanticipated contact with moisture in the air and makes the hydride pumpable. At the point of storage and use, a chemical hydride/water reaction is used to produce high-purity hydrogen. An essential feature of this approach is the recovery and recycle of the spent hydride at centralized processing plants, resulting in an overall low cost for hydrogen. This approach has two clear benefits: it greatly improves energy transmission and storage characteristics of hydrogen as a fuel, and it produces the hydrogen carrier efficiently and economically from a low cost carbon source. The preliminary economic analysis of the process indicates that hydrogen can be produced for $3.85 per million Btu based on a carbon cost of $1.42 per million Btu and a plant sized to serve a million cars per day. This compares to current costs of approximately $9.00 per million Btu to produce hydrogen from $3.00 per million Btu natural gas, and $25 per million Btu to produce hydrogen by electrolysis from $0.05 per Kwh electricity. The present standard for production of hydrogen from renewable energy is photovoltaic-electrolysis at $100 to $150 per million Btu.

  2. Multislice simulations for in-situ HRTEM studies of nanostructured magnesium hydride at ambient hydrogen pressure

    Energy Technology Data Exchange (ETDEWEB)

    Surrey, Alexander, E-mail: [IFW Dresden, Institute for Metallic Materials, P.O. Box 270116, D-01171 Dresden (Germany); Institut für Festkörperphysik, Technische Universität Dresden, D-01062 Dresden (Germany); Schultz, Ludwig [IFW Dresden, Institute for Metallic Materials, P.O. Box 270116, D-01171 Dresden (Germany); Institut für Festkörperphysik, Technische Universität Dresden, D-01062 Dresden (Germany); Rellinghaus, Bernd, E-mail: [IFW Dresden, Institute for Metallic Materials, P.O. Box 270116, D-01171 Dresden (Germany)


    Highlights: • Multislice HRTEM contrast simulations of a windowed environmental cell. • Study of Mg and MgH2 nanocrystals as model system in hydrogen at ambient pressure. • Investigation of spatial resolution and contrast depending on specimen thickness, defocus, and hydrogen pressure. • Atomic resolution is expected for specimens as thin as 5  nm. - Abstract: The use of transmission electron microscopy (TEM) for the structural characterization of many nanostructured hydrides, which are relevant for solid state hydrogen storage, is hindered due to a rapid decomposition of the specimen upon irradiation with the electron beam. Environmental TEM allows to stabilize the hydrides by applying a hydrogen back pressure of up to 4.5 bar in a windowed environmental cell. The feasibility of high-resolution TEM (HRTEM) investigations of light weight metals and metal hydrides in such a “nanoreactor” is studied theoretically by means of multislice HRTEM contrast simulations using Mg and its hydride phase, MgH{sub 2}, as model system. Such a setup provides the general opportunity to study dehydrogenation and hydrogenation reactions at the nanoscale under technological application conditions. We analyze the dependence of both the spatial resolution and the HRTEM image contrast on parameters such as the defocus, the metal/hydride thickness, and the hydrogen pressure in order to explore the possibilities and limitations of in-situ experiments with windowed environmental cells. Such simulations may be highly valuable to pre-evaluate future experimental studies.

  3. Research on measurement of residual stresses of hemispherical lithium hydride by blind-hole method

    Energy Technology Data Exchange (ETDEWEB)

    Bo, Lin, E-mail: [China Academy of Engineering Physics, P.O. Box: 919-71, Mianyang 621900, Sichuan (China); Kaihui, He [China International Nuclear Fusion Energy Program Execution Center, 15B, Fuxing Rd, 100862 Beijing (China); Dongwei, Shan; Weicai, Yang; Yonggang, Chi; Mei, Liu; Jun, Shen [China Academy of Engineering Physics, P.O. Box: 919-71, Mianyang 621900, Sichuan (China)


    Highlights: • The residual stresses of sintered and machined lithium hydride of SR40 hyper-hemispherical and SR30 inner hemispherical sample were measured by blind-hole method. • The nearly 45 degrees direction residual stresses of SR40 hyper-hemisphere and SR30 inner hemisphere are the greatest stresses on spherical surface of lithium hydride samples. • The radial residual stress σ{sub r} of SR40 hyper-hemispherical and SR30 inner hemispherical sample is compressive stress and the circumferential residual stress σ{sub t} is tensile stress. - Abstract: The released strains of sintered and machined lithium hydride of SR40 hyper-hemispherical and SR30 inner hemispherical sample could be shown in the measuring process by blind-hole method. The residual stresses of lithium hydride sample were calculated with the formulas of residual stress and released strains. The results show that the nearly 45 degrees direction residual stresses of SR40 hyper-hemisphere and SR30 inner hemisphere are the greatest stresses on spherical surface of lithium hydride samples. The radial residual stress σ{sub r} of SR40 hyper-hemispherical and SR30 inner hemispherical sample is compressive stress and the circumferential residual stress σ{sub t} is tensile stress.

  4. Another Look at the Mechanisms of Hydride Transfer Enzymes from Quantum and Classical Transition Path Sampling (United States)

    Dzierlenga, Michael; Antoniou, Dimitri; Schwartz, Steven


    The mechanisms involved in enzymatic hydride transfer have been studies for years but questions remain, due to the difficulty in determining the participation of protein dynamics and quantum effects, especially hydrogen tunneling. In this study, we use transition path sampling (TPS) with normal mode centroid molecular dynamics (CMD) to calculate the barrier to hydride transfer in yeast alcohol dehydrogenase (YADH) and lactate dehydrogenase (LDH). Calculation of the work applied to the hydride during the reaction allows for observation of the change in barrier height due to inclusion of quantum effects. Additionally, the same calculations were performed using deuterium as the transferring particle to validate our methods with experimentally measured kinetic isotope effects. The change in barrier height in YADH upon inclusion of quantum effects is indicative of a zero-point energy contribution, and is evidence that the protein mediates a near-barrierless transfer of the rate-limiting hydride. Calculation of kinetic isotope effects using the average difference in barrier between hydride and deuteride agreed well with experimental results. The authors acknowledge the support of the National Institutes of Health Grants GM068036 and GM102226.

  5. Generator. Generator

    Energy Technology Data Exchange (ETDEWEB)

    Bossmann, H.P.; Knoedler, R.


    The invention refers to a thermo-electric generator, which contains sodium as the means of heat transport. The sodium moves from the space of higher temperature through a space into the space of lower temperature. One can do without a pump for transporting the sodium back from the space of lower temperature to the space of higher temperature, as the thermo-electric generator can rotate around an axis. It is therefore possible to interchange the position of the two spaces relative to the heat source.

  6. Room temperature and thermal decomposition of magnesium hydride/deuteride thin films

    Energy Technology Data Exchange (ETDEWEB)

    Ares, J.R.; Leardini, F.; Bodega, J.; Macia, M.D.; Diaz-Chao, P.; Ferrer, I.J.; Fernandez, J.F.; Sanchez, C. [Universidad Autonoma de Madrid (Spain). Lab. de Materiales de Interes en Energias Renovables


    Magnesium hydride (MgH{sub 2}) can be considered an interesting material to store hydrogen as long as two main drawbacks were solved: (i) its high stability and (ii) slow (de)hydriding kinetics. In that context, magnesium hydride films are an excellent model system to investigate the influence of structure, morphology and dimensionality on kinetic and thermodynamic properties. In the present work, we show that desorption mechanism of Pd-capped MgH{sub 2} at room temperature is controlled by a bidimensional interphase mechanism and a similar rate step limiting mechanism is observed during thermal decomposition of MgH{sub 2}. This mechanism is different to that occurring in bulk MgH{sub 2} (nucleation and growth) and obtained activation energies are lower than those reported in bulk MgH{sub 2}. We also investigated the Pd-capping properties upon H-absorption/desorption by means of RBS and isotope experiments. (orig.)

  7. Atom Probe Analysis of Ex Situ Gas-Charged Stable Hydrides. (United States)

    Haley, Daniel; Bagot, Paul A J; Moody, Michael P


    In this work, we report on the atom probe tomography analysis of two metallic hydrides formed by pressurized charging using an ex situ hydrogen charging cell, in the pressure range of 200-500 kPa (2-5 bar). Specifically we report on the deuterium charging of Pd/Rh and V systems. Using this ex situ system, we demonstrate the successful loading and subsequent atom probe analysis of deuterium within a Pd/Rh alloy, and demonstrate that deuterium is likely present within the oxide-metal interface of a native oxide formed on vanadium. Through these experiments, we demonstrate the feasibility of ex situ hydrogen analysis for hydrides via atom probe tomography, and thus a practical route to three-dimensional imaging of hydrogen in hydrides at the atomic scale.

  8. An Investigation on the Persistence of Uranium Hydride during Storage of Simulant Nuclear Waste Packages. (United States)

    Stitt, C A; Harker, N J; Hallam, K R; Paraskevoulakos, C; Banos, A; Rennie, S; Jowsey, J; Scott, T B


    Synchrotron X-rays have been used to study the oxidation of uranium and uranium hydride when encapsulated in grout and stored in de-ionised water for 10 months. Periodic synchrotron X-ray tomography and X-ray powder diffraction have allowed measurement and identification of the arising corrosion products and the rates of corrosion. The oxidation rates of the uranium metal and uranium hydride were slower than empirically derived rates previously reported for each reactant in an anoxic water system, but without encapsulation in grout. This was attributed to the grout acting as a physical barrier limiting the access of oxidising species to the uranium surface. Uranium hydride was observed to persist throughout the 10 month storage period and industrial consequences of this observed persistence are discussed.

  9. Interaction of electrons with light metal hydrides in the transmission electron microscope. (United States)

    Wang, Yongming; Wakasugi, Takenobu; Isobe, Shigehito; Hashimoto, Naoyuki; Ohnuki, Somei


    Transmission electron microscope (TEM) observation of light metal hydrides is complicated by the instability of these materials under electron irradiation. In this study, the electron kinetic energy dependences of the interactions of incident electrons with lithium, sodium and magnesium hydrides, as well as the constituting element effect on the interactions, were theoretically discussed, and electron irradiation damage to these hydrides was examined using in situ TEM. The results indicate that high incident electron kinetic energy helps alleviate the irradiation damage resulting from inelastic or elastic scattering of the incident electrons in the TEM. Therefore, observations and characterizations of these materials would benefit from increased, instead decreased, TEM operating voltage. © The Author 2014. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail:

  10. Hydrogen separation by nanocrystalline titanium nitride membranes with high hydride ion conductivity (United States)

    Kura, Chiharu; Kunisada, Yuji; Tsuji, Etsushi; Zhu, Chunyu; Habazaki, Hiroki; Nagata, Shinji; Müller, Michael P.; De Souza, Roger A.; Aoki, Yoshitaka


    The production of pure hydrogen for use in energy applications and related industries often relies on the permeation of hydrogen through palladium-based membranes. However, the scarcity of Pd reserves necessitates the development of affordable alternatives with high hydrogen permeability. Here we report room-temperature hydrogen permeability of titanium nitrides (widely used as tough and inert coating materials) enabled by mixed hydride ion-electron conductivity. Combined spectroscopic, permeability and microgravimetric measurements reveal that nanocrystalline TiNx membranes feature enhanced grain-boundary diffusion of hydride anions associated with interfacial Ti cations on nanograins. Since the corresponding activation energies are very low (kJ mol-1), these membranes yield a considerably higher room-temperature hydrogen flux than Pd membranes of equivalent thickness. Overall, the current study establishes general guidelines for developing hydride ion transport membranes based on a simple transition metal nitride for hydrogen purification, membrane reactors and other applications.

  11. An Investigation on the Persistence of Uranium Hydride during Storage of Simulant Nuclear Waste Packages (United States)

    Harker, N. J.; Hallam, K. R.; Paraskevoulakos, C.; Banos, A.; Rennie, S.; Jowsey, J.


    Synchrotron X-rays have been used to study the oxidation of uranium and uranium hydride when encapsulated in grout and stored in de-ionised water for 10 months. Periodic synchrotron X-ray tomography and X-ray powder diffraction have allowed measurement and identification of the arising corrosion products and the rates of corrosion. The oxidation rates of the uranium metal and uranium hydride were slower than empirically derived rates previously reported for each reactant in an anoxic water system, but without encapsulation in grout. This was attributed to the grout acting as a physical barrier limiting the access of oxidising species to the uranium surface. Uranium hydride was observed to persist throughout the 10 month storage period and industrial consequences of this observed persistence are discussed. PMID:26176551

  12. Development of Hydrogen Storage Tank Systems Based on Complex Metal Hydrides

    Directory of Open Access Journals (Sweden)

    Morten B. Ley


    Full Text Available This review describes recent research in the development of tank systems based on complex metal hydrides for thermolysis and hydrolysis. Commercial applications using complex metal hydrides are limited, especially for thermolysis-based systems where so far only demonstration projects have been performed. Hydrolysis-based systems find their way in space, naval, military and defense applications due to their compatibility with proton exchange membrane (PEM fuel cells. Tank design, modeling, and development for thermolysis and hydrolysis systems as well as commercial applications of hydrolysis systems are described in more detail in this review. For thermolysis, mostly sodium aluminum hydride containing tanks were developed, and only a few examples with nitrides, ammonia borane and alane. For hydrolysis, sodium borohydride was the preferred material whereas ammonia borane found less popularity. Recycling of the sodium borohydride spent fuel remains an important part for their commercial viability.

  13. High Density Hydrogen Storage System Demonstration Using NaAlH4 Based Complex Compound Hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Daniel A. Mosher; Xia Tang; Ronald J. Brown; Sarah Arsenault; Salvatore Saitta; Bruce L. Laube; Robert H. Dold; Donald L. Anton


    This final report describes the motivations, activities and results of the hydrogen storage independent project "High Density Hydrogen Storage System Demonstration Using NaAlH4 Based Complex Compound Hydrides" performed by the United Technologies Research Center under the Department of Energy Hydrogen Program, contract # DE-FC36-02AL67610. The objectives of the project were to identify and address the key systems technologies associated with applying complex hydride materials, particularly ones which differ from those for conventional metal hydride based storage. This involved the design, fabrication and testing of two prototype systems based on the hydrogen storage material NaAlH4. Safety testing, catalysis studies, heat exchanger optimization, reaction kinetics modeling, thermochemical finite element analysis, powder densification development and material neutralization were elements included in the effort.

  14. Development of Hydrogen Storage Tank Systems Based on Complex Metal Hydrides (United States)

    Ley, Morten B.; Meggouh, Mariem; Moury, Romain; Peinecke, Kateryna; Felderhoff, Michael


    This review describes recent research in the development of tank systems based on complex metal hydrides for thermolysis and hydrolysis. Commercial applications using complex metal hydrides are limited, especially for thermolysis-based systems where so far only demonstration projects have been performed. Hydrolysis-based systems find their way in space, naval, military and defense applications due to their compatibility with proton exchange membrane (PEM) fuel cells. Tank design, modeling, and development for thermolysis and hydrolysis systems as well as commercial applications of hydrolysis systems are described in more detail in this review. For thermolysis, mostly sodium aluminum hydride containing tanks were developed, and only a few examples with nitrides, ammonia borane and alane. For hydrolysis, sodium borohydride was the preferred material whereas ammonia borane found less popularity. Recycling of the sodium borohydride spent fuel remains an important part for their commercial viability. PMID:28793541

  15. Zirconium hydride precipitation kinetics in Zircaloy-4 observed with synchrotron X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Blackmur, M.S., E-mail: [Materials Performance Centre, School of Materials, The University of Manchester, Manchester M1 7HS (United Kingdom); Robson, J.D.; Preuss, M. [Materials Performance Centre, School of Materials, The University of Manchester, Manchester M1 7HS (United Kingdom); Zanellato, O. [PIMM, Ensam – Cnam – CNRS, 151 Boulevard de l’Hôpital, 75013 Paris (France); Cernik, R.J. [Materials Performance Centre, School of Materials, The University of Manchester, Manchester M1 7HS (United Kingdom); Shi, S.-Q. [Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China); Ribeiro, F. [Institut de Radioprotection et de Sûreté Nucléaire, CEN Cadarache, 13115 St. Paul Les Durance (France); Andrieux, J. [Beamline ID15, European Synchrotron Radiation Facility, Grenoble (France)


    High-energy synchrotron X-ray diffraction was used to investigate the isothermal precipitation of δ-hydride platelets in Zircaloy-4 at a range of temperatures relevant to reactor conditions, during both normal operation and thermal transients. From an examination of the rate kinetics of the precipitation process, precipitation slows with increasing temperature above 200 °C, due to a reduction in the thermodynamic driving force. A model for nucleation rate as a function of temperature was developed, to interpret the precipitation rates seen experimentally. While the strain energy associated with the misfit between hydrides and the matrix makes a significant contribution to the energy barrier for nucleation, a larger contribution arises from the interfacial energy. Diffusion distance calculations show that hydrogen is highly mobile in the considered thermal range and on the scale of inter-hydride spacing and it is not expected to be significantly rate limiting on the precipitation process that takes place under reactor operating conditions.

  16. Hydride formation thermodynamics and hysteresis in individual Pd nanocrystals with different size and shape. (United States)

    Syrenova, Svetlana; Wadell, Carl; Nugroho, Ferry A A; Gschneidtner, Tina A; Diaz Fernandez, Yuri A; Nalin, Giammarco; Świtlik, Dominika; Westerlund, Fredrik; Antosiewicz, Tomasz J; Zhdanov, Vladimir P; Moth-Poulsen, Kasper; Langhammer, Christoph


    Physicochemical properties of nanoparticles may depend on their size and shape and are traditionally assessed in ensemble-level experiments, which accordingly may be plagued by averaging effects. These effects can be eliminated in single-nanoparticle experiments. Using plasmonic nanospectroscopy, we present a comprehensive study of hydride formation thermodynamics in individual Pd nanocrystals of different size and shape, and find corresponding enthalpies and entropies to be nearly size- and shape-independent. The hysteresis observed is significantly wider than in bulk, with details depending on the specifics of individual nanoparticles. Generally, the absorption branch of the hysteresis loop is size-dependent in the sub-30 nm regime, whereas desorption is size- and shape-independent. The former is consistent with a coherent phase transition during hydride formation, influenced kinetically by the specifics of nucleation, whereas the latter implies that hydride decomposition either occurs incoherently or via different kinetic pathways.

  17. Effect of Sn and Nb on generalized stacking fault energy surfaces in zirconium and gamma hydride habit planes (United States)

    Udagawa, Yutaka; Yamaguchi, Masatake; Tsuru, Tomohito; Abe, Hiroaki; Sekimura, Naoto


    We have investigated the effects of Sn and Nb on dislocation properties in a Zr lattice to elucidate the role of these alloying elements in hydride nucleation processes. According to experimental observations, γ-hydride habit planes are close to the prismatic plane in pure Zr and close to the basal plane in Zircaloy. Dislocation loops are observed around hydride precipitates, implying they play a part in hydride formation. Our ab initio generalized stacking-fault energy calculations showed remarkable effects of Sn on unstable-stacking energy and stacking-fault energy: these parameters for basal slip were considerably reduced while those for prismatic slip were increased in the presence of Sn. These results suggest selective stabilization and enhancement of dislocation spreading in the basal plane, promoting possible elementary processes of hydride precipitation with basal habit plane, i.e. screw-dislocation spreading and edge-dislocation emission in the basal plane.

  18. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Louthan, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); PNNL, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  19. An all-solid-state metal hydride - Sulfur lithium-ion battery (United States)

    López-Aranguren, Pedro; Berti, Nicola; Dao, Anh Ha; Zhang, Junxian; Cuevas, Fermín; Latroche, Michel; Jordy, Christian


    A metal hydride is used for the first time as anode in a complete all-solid-state battery with sulfur as cathode and LiBH4 as solid electrolyte. The hydride is a nanocomposite made of MgH2 and TiH2 counterparts. The battery exhibits a high reversible capacity of 910 mAh g-1 with discharge plateaus at 1.8 V and 1.4 V. Moreover, the capacity remains to 85% of the initial value over the 25 first charge/discharge cycles.

  20. Moessbauer studies of Dy/sub 2/Fesub(17-y)Alsub(y) hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Zukrowski, J.; Barnasik, A.; Krop, K.; Radwanski, R.; Pszczola, J. (Akademia Gorniczo-Hutnicza, Krakow (Poland)); Suwalski, J.; Kucharski, Z.; Lukasiak, M. (Solid State Physics Department, IBJ, Swierk, Poland)


    The X-ray and Moessbauer measurements of both /sup 57/Fe and /sup 161/Dy in Dy/sub 2/Fesub(17-y)Alsub(y) (y = 0, 1.5 and 3) compounds and their hydrides are reported. Hydrogenation slightly increases the lattice parameters. An appreciable increase of the isomer shift and the hyperfine field at /sup 57/Fe nuclei is observed after hydrogenation. The hyperfine field for both the parent compound and its hydride decreases with increasing Al content across the series. Only a small variation of the hyperfine field at /sup 161/Dy nuclei is noticeable after hydrogenation.

  1. Hydrides in young stellar objects: Radiation tracers in a protostar-disk-outflow system


    Benz, A.O.; Dominik, C.; Visser, R.


    Context. Hydrides of the most abundant heavier elements are fundamental molecules in cosmic chemistry. Some of them trace gas irradiated by UV or X-rays. Aims. We explore the abundances of major hydrides in W3 IRS5, a prototypical region of high-mass star formation. Methods. W3 IRS5 was observed by HIFI on the Herschel Space Observatory with deep integration (≃2500 s) in 8 spectral regions. Results. The target lines including CH, NH, H_3O^+, and the new molecules SH^+, H_2O^+, and OH...

  2. Complex Metal Hydrides for hydrogen storage and solid-state ion conductors

    DEFF Research Database (Denmark)

    Payandeh GharibDoust, SeyedHosein

    and electricity in batteries. However, both hydrogen and electricity must be stored in a very dense way to be useful, e.g. for mobile applications. Complex metal hydrides have high hydrogen density and have been studied during the past twenty years in hydrogen storage systems. Moreover, they have shown high ionic...... conductivities which promote their application as solid electrolytes in batteries. This dissertation presents the synthesis and characterization of a variety of complex metal hydrides and explores their hydrogen storage properties and ionic conductivity. Five halide free rare earth borohydrides RE(BH4)3, (RE...

  3. High performance nickel-metal hydride and lithium-ion batteries (United States)

    Köhler, U.; Kümpers, J.; Ullrich, M.

    In comparison to pure electric vehicles (EV) the opportunities for hybrid electric vehicles (HEV) are much better, since range restrictions no longer apply and the interaction of the internal combustion engine and electrical drive bring increased energy efficiency and environmental friendliness. The batteries used in such applications must meet very high standards in terms of performance and service life. Although the battery capacity is smaller than for a purely EV, it needs to be able to generate far higher levels of power. The technical challenges of hybrid applications have led to the development of high-performance batteries. At the forefront of these is the nickel-metal hydride system (NiMH). With specific power and energy data in the range from 300 to 900 W/kg, 55 to 37 Wh/kg, respectively (based on cell weight), excellent charge efficiency and energy throughput levels of more than 10,000 times the nominal energy, the NiMH system comes very close to satisfying the needs of the HEV. Parallel developments with the lithium-ion system based on manganese spinel as cathode material show that, with specific power and energy levels above 1000 W/kg, 50 Wh/kg, respectively, this technology will also be able to play an important role in the future. Service life figures in terms of calendar life have been improved tremendously to about three years, but there is still a need for further improvement in order to meet the specifications of car manufacturers. For this reason, an increase of life span is the subject of intensive development work.

  4. Hydride, hydrogen atom, proton, and electron transfer driving forces of various five-membered heterocyclic organic hydrides and their reaction intermediates in acetonitrile. (United States)

    Zhu, Xiao-Qing; Zhang, Ming-Tian; Yu, Ao; Wang, Chun-Hua; Cheng, Jin-Pei


    The enthalpy changes of 47 five-membered heterocyclic compounds (ZH) [33 substituted 2,3-dihydro-2-phenylbenzo[d]imidazoles (1H-5H), 9 substituted 2,3-dihydro-2-phenylbenzo[d]thiazoles (6H), and 5 substituted 2,3-dihydro-2-phenylbenzo[d]oxazoles (7H)] as a class of very important organic hydride donors to release hydride anion were determined by using titration calorimetry. The result shows that the enthalpy change scale of the 47 ZH in acetonitrile ranges from 49.0 to 93.4 kcal/mol. Such a long energy scale evidently shows that the 47 ZH can construct a large and useful library of organic hydride donors, which can provide various organic hydride donors that the hydride-releasing enthalpies are known. The enthalpy changes of the 47 ZH to release hydrogen atom and the 47 ZH+* to release proton and hydrogen atom were also evaluated by using relative thermodynamic cycles according to Hess' law. The results show: (1) the enthalpy change scale of the 47 ZH to release hydrogen atom covers a range from 71.8 to 91.4 kcal/mol, indicating that the 47 ZH all should be weak hydrogen atom donors. (2) The enthalpy change scales of the 47 ZH+* to release proton and to release hydrogen atom range from 17.5 to 25.7 and from 27.2 to 52.4 kcal/mol, respectively, implying that the proton-donating abilities of ZH+* are generally quite larger than the corresponding hydrogen atom-donating abilities. The standard redox potentials of the 47 ZH and the 47 corresponding salts (Z+) were measured by using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), the results display that the standard oxidation potential scale of ZH ranges from -0.254 to -0.002 V for 1H-5H and from 0.310 to 0.638 V for 6H-7H, implying that 1H-5H should be strong one-electron reducing agents and 6H-7H should be weak one-electron reducing agents; the standard reduction potential scale of Z+ ranges from -1.832 to -2.200 V for 1+-5+ and from -1.052 to -1.483V for 6+-7+, meaning that 1+-5+ belong to very

  5. Validation of Hiriart equation to compute steam production by the lip pressure method; Validacion de la ecuacion de Hiriart para calculo de gasto de vapor por el metodo de presion de labio

    Energy Technology Data Exchange (ETDEWEB)

    Flores Armenta, Magaly [Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico)


    conocido, y el agua en un vertedor. Los resultados de la validacion demuestran la factibilidad de aplicar el metodo de presion de labio y utilizar una ecuacion sencilla de ajuste, que se presenta a continuacion, con un porcentaje de error menor del 1%, sin que influya notablemente la entalpia de produccion de los pozos geotermicos. Esta ecuacion es, en general: Q{nu} =(20642)(F*P*D{sup 2}/{radical}h-2000). Y para el caso del campo geotermico de Los Azufres: Q{nu}810*P*D{sup 2}

  6. Characterization of Nb hydrides synthesized in high-pressure supercritical water by micro-beam hard X-ray photoelectron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Soda, Kazuo, E-mail: [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kondo, Hiroki; Kato, Masahiko [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Shiraki, Tatsuhito [Department of Materials, Physics and Energy Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Niwa, Ken; Kusaba, Keiji; Hasegawa, Masashi [Department of Crystalline Materials Science, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Ikenaga, Eiji [Japan Synchrotron Radiation Research Institute, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)


    Highlights: •Nb hydride specimens were synthesized in high-pressure supercritical water. •Synthesized specimens were characterized by hard X-ray photoelectron spectroscopy. •The synthesized Nb hydrides are covered with several 10 nm thick Nb oxides. •Nb hydrides are formed deep inside the specimens. -- Abstract: We have characterized Nb hydrides synthesized in high-pressure supercritical water by hard X-ray photoelectron spectroscopy. Comparison is made, in particular, of the Nb 2p core level spectra and valence band ones for the Nb hydride specimens in different stages of hydrogenation with those for Nb oxide and metallic references. The Nb 2p core level spectra of the Nb hydride specimens synthesized at relatively low temperature show an intense Nb{sub 2}O{sub 5} component and a shoulder structure, which is attributed to Nb hydrides, at the high binding energy side of a metallic component of the Nb metal. The valence band spectra of the Nb hydride specimens also show a broad band at the binding energy E{sub B} between 5 and 9 eV, which is ascribed mainly to Nb oxides. The present results indicate that the surface of the synthesized Nb hydrides is covered with several 10 nm thick Nb oxides and suggest that the Nb hydrides are formed deep inside the specimens. The Nb 2p chemical shift implies the Nb valence of +1.4 for the synthesized hydride NbH{sub x}.

  7. Influence of temperature and hydrogen content on stress-induced radial hydride precipitation in Zircaloy-4 cladding

    Energy Technology Data Exchange (ETDEWEB)

    Desquines, J., E-mail:; Drouan, D.; Billone, M.; Puls, M.P.; March, P.; Fourgeaud, S.; Getrey, C.; Elbaz, V.; Philippe, M.


    Radial hydride precipitation in stress relieved Zircaloy-4 fuel claddings is studied using a new thermal–mechanical test. Two maximum temperatures for radial hydride precipitation heat treatment are studied, 350 and 450 °C with hydrogen contents ranging between 50 and 600 wppm. The new test provides two main results of interest: the minimum hoop stress required to precipitate radial hydrides and a maximum stress above which, all hydrides precipitate in the radial direction. Based on these two extreme stress conditions, a model is derived to determine the stress level required to obtain a given fraction of radial hydrides after high temperature thermal–mechanical heat treatment. The proposed model is validated using metallographic observation data on pressurized tubes cooled down under constant pressure. Most of the samples with reoriented hydrides are further subjected to a ductility test. Using finite element modeling, the test results are analyzed in terms of crack nucleation within radial hydrides at the outer diameter and crack growth through the thickness of the tubular samples. The combination of test results shows that samples with hydrogen contents of about 100 wppm had the lowest ductility.

  8. ReaxFF(MgH) reactive force field for magnesium hydride systems. (United States)

    Cheung, Sam; Deng, Wei-Qiao; van Duin, Adri C T; Goddard, William A


    We have developed a reactive force field (ReaxFF(MgH)) for magnesium and magnesium hydride systems. The parameters for this force field were derived from fitting to quantum chemical (QM) data on magnesium clusters and on the equations of states for condensed phases of magnesium metal and magnesium hydride crystal. The force field reproduces the QM-derived cell parameters, density, and the equations of state for various pure Mg and MgH(2) crystal phases as well as and bond dissociation, angle bending, charge distribution, and reaction energy data for small magnesium hydride clusters. To demonstrate one application of ReaxFF(MgH), we have carried out MD simulations on the hydrogen absorption/desorption process in magnesium hydrides, focusing particularly on the size effect of MgH(2) nanoparticles on H(2) desorption kinetics. Our results show a clear relationship between grain size and heat of formation of MgH(2); as the particle size decreases, the heat of formation increases. Between 0.6 and 2.0 nm, the heat of formation ranges from -16 to -19 kcal/Mg and diverges toward that of the bulk value (-20.00 kcal/Mg) as the particle diameter increases beyond 2 nm. Therefore, it is not surprising to find that Mg nanoparticles formed by ball milling (20-100 nm) do not exhibit any significant change in thermochemical properties.

  9. Model for the Prediction of the Hydriding Thermodynamics of Pd-Rh-Co Ternary Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Teter, D.F.; Thoma, D.J.


    A dilute solution model (with respect to the substitutional alloying elements) has been developed, which accurately predicts the hydride formation and decomposition thermodynamics and the storage capacities of dilute ternary Pd-Rh-Co alloys. The effect of varying the rhodium and cobalt compositions on the thermodynamics of hydride formation and decomposition and hydrogen capacity of several palladium-rhodium-cobalt ternary alloys has been investigated using pressure-composition (PC) isotherms. Alloying in the dilute regime (<10 at.%) causes the enthalpy for hydride formation to linearly decrease with increasing alloying content. Cobalt has a stronger effect on the reduction in enthalpy than rhodium for equivalent alloying amounts. Also, cobalt reduces the hydrogen storage capacity with increasing alloying content. The plateau thermodynamics are strongly linked to the lattice parameters of the alloys. A near-linear dependence of the enthalpy of hydride formation on the lattice parameter was observed for both the binary Pd-Rh and Pd-Co alloys, as well as for the ternary Pd-Rh-Co alloys. The Pd-5Rh-3Co (at. %) alloy was found to have similar plateau thermodynamics as a Pd-10Rh alloy, however, this ternary alloy had a diminished hydrogen storage capacity relative to Pd-10Rh.

  10. The Influence of Titanium Hydride Pretreatment on the Compressive Properties of Aluminum Foam

    Directory of Open Access Journals (Sweden)

    Zan ZHANG


    Full Text Available Macrostructure has an important effect on the compressive properties of closed-cell aluminum foams. Meanwhile, the decomposition behavior of a foaming agent has a significant influence on the macrostructure of closed-cell aluminum foams. In order to get optimal compressive properties on aluminum foams, it is important to obtain the optimal decomposition behavior of a foaming agent. In this paper, different heat treatment temperatures and fixed heat treatment were employed to investigate the decomposition behavior of titanium hydride. For a more intuitive understanding of their decomposition characteristics of the pretreated titanium hydrides, closed-cell commercially pure Al foams were prepared by melt foaming method using different types of pretreated titanium hydrides as foaming agent. In addition, the macrostructures and quasi-static compressive properties were used to evaluate the pretreatment effect. The results showed that pretreatments have a significant influence on the macrostructure and compressive properties of aluminum foams. The decomposition characteristics of titanium hydride pretreated at 753 K for 30 min are most suitable for the preparation of closed-cell aluminum foams under present conditions, as the foams possess good combination of pore size distribution, yield strength and energy absorption capacity. DOI:

  11. On prediction of the ignition potential of uranium metal and hydride

    Energy Technology Data Exchange (ETDEWEB)

    Epstein, M.; Luangdilok, W.; Plys, M.G.; Fauske, H.K. [Fauske & Associates, Inc., Burr Ridge, IL (United States)


    Uranium metal and hydride ignition experience and experiments are critically reviewed, and an analytical technique for prediction of the ignition conditions is presented and validated. Proper and consistent quantification of the available experiences and experiments is demonstrated by use of classical ignition theory applied with a state-of-the-art kinetic rate law, the appropriate geometry, and thermal properties. 19 refs., 7 figs.

  12. The impact of carbon materials on the hydrogen storage properties of light metal hydrides

    NARCIS (Netherlands)

    Adelhelm, P.A.|info:eu-repo/dai/nl/313907854; de Jongh, P.E.|info:eu-repo/dai/nl/186125372


    The safe and efficient storage of hydrogen is still one of the remaining challenges towards fuel cell powered cars. Metal hydrides are a promising class of materials as they allow the storage of large amounts of hydrogen in a small volume at room temperature and low pressures. However, usually the

  13. Enhancement of Hydrogen Storage Behavior of Complex Hydrides via Bimetallic Nanocatalysts Doping

    Directory of Open Access Journals (Sweden)

    Prakash C. Sharma


    Full Text Available Pristine complex quaternary hydride (LiBH4/2LiNH2 and its destabilized counterpart (LiBH4/2LiNH2/nanoMgH2 have recently shown promising reversible hydrogen storage capacity under moderate operating conditions. The destabilization of complex hydride via nanocrystalline MgH2 apparently lowers the thermodynamic heat values and thus enhances the reversible hydrogen storage behavior at moderate temperatures. However, the kinetics of these materials is rather low and needs to be improved for on-board vehicular applications. Nanocatalyst additives such as nano Ni, nano Fe, nano Co, nano Mn and nano Cu at low concentrations on the complex hydride host structures have demonstrated a reduction in the decomposition temperature and overall increase in the hydrogen desorption reaction rates. Bi-metallic nanocatalysts such as the combination of nano Fe and nano Ni have shown further pronounced kinetics enhancement in comparison to their individual counterparts. Additionally, the vital advantage of using bi-metallic nanocatalysts is to enable the synergistic effects and characteristics of the two transitional nanometal species on the host hydride matrix for the optimized hydrogen storage behavior.

  14. Non-Precious Bimetallic Catalysts for Selective Dehydrogenation of an Organic Chemical Hydride System

    KAUST Repository

    Shaikh Ali, Anaam


    Methylcyclohexane (MCH)-Toluene (TOL) chemical hydride cycles as a hydrogen carrier system is successful with the selective dehydrogenation reaction of MCH to TOL, which has been achieved only using precious Pt-based catalysts. Herein, we report improved selectivity using non-precious metal nickel-based bimetallic catalysts, where the second metal occupies the unselective step sites.

  15. Molecular early main group metal hydrides : synthetic challenge, structures and applications

    NARCIS (Netherlands)

    Harder, Sjoerd


    Within the general area of early main group metal chemistry, the controlled synthesis of well-defined metal hydride complexes is a rapidly developing research field. As group 1 and 2 metal complexes are generally highly dynamic and lattice energies for their [MH](infinity) and [MH2](infinity) salts

  16. Investigation of the hydrogen neutrals in a discharge source used for production of metal hydrides (United States)

    Bozhinova, I.; Iordanova, S.; Pashov, A.


    The paper discusses the possible mechanisms for production of metal hydrides (MH) in a DC discharge source. The results of different experiments suggest that the molecules are sputtered directly from the surface of the cathode, where they are formed after adsorption of atomic hydrogen. This hypothesis allows one to understand the operation of the source studied and to optimize its working conditions.

  17. Synthesis and Characterization of Metal Hydride/Carbon Aerogel Composites for Hydrogen Storage

    Directory of Open Access Journals (Sweden)

    Kuen-Song Lin


    Full Text Available Two materials currently of interest for onboard lightweight hydrogen storage applications are sodium aluminum hydride (NaAlH4, a complex metal hydride, and carbon aerogels (CAs, a light porous material connected by several spherical nanoparticles. The objectives of the present work have been to investigate the synthesis, characterization, and hydrogenation behavior of Pd-, Ti- or Fe-doped CAs, NaAlH4, and MgH2 nanocomposites. The diameters of Pd nanoparticles onto CA’s surface and BET surface area of CAs were 3–10 nm and 700–900 m2g−1, respectively. The H2 storage capacity of metal hydrides has been studied using high-pressure TGA microbalance and they were 4.0, 2.7, 2.1, and 1.2 wt% for MgH2-FeTi-CAs, MgH2-FeTi, CAs-Pd, and 8 mol% Ti-doped NaAlH4, respectively, at room temperature. Carbon aerogels with higher surface area and mesoporous structures facilitated hydrogen diffusion and adsorption, which accounted for its extraordinary hydrogen storage phenomenon. The hydrogen adsorption abilities of CAs notably increased after inclusion of metal hydrides by the “hydrogen spillover” mechanisms.

  18. Phenolic composition of pomegranate peel extracts using an LC-MS approach with silica hydride columns (United States)

    The peels of different pomegranate cultivars (Molla Nepes, Parfianka, Purple Heart, Wonderful and Vkunsyi) were compared in terms of phenolic composition and total phenolics. Analyses were performed on two silica hydride-based stationary phases: phenyl and undecenoic acid columns. Quantitation was ...

  19. Titanium compacts produced by the pulvimetallurgical hydride-dehydride method for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Barreiro, M M [Materiales Dentales, Facultad de OdontologIa, Universidad de Buenos Aires, Marcelo T de Alvear 2142 (1122), Buenos Aires (Argentina); Grana, D R; Kokubu, G A [PatologIa I. Escuela de OdontologIa, Facultad de Medicina. Asociacion Odontologica Argentina-Universidad del Salvador, Tucuman 1845 (1050) Buenos Aires (Argentina); Luppo, M I; Mintzer, S; Vigna, G, E-mail: mbarreiro@mater.odon.uba.a, E-mail:, E-mail:, E-mail: [Departamento Materiales, Comision Nacional de Energia Atomica, Gral Paz 1499 (B1650KNA), San MartIn, Buenos Aires (Argentina)


    Titanium powder production by the hydride-dehydride method has been developed as a non-expensive process. In this work, commercially pure grade two Ti specimens were hydrogenated. The hydrided material was milled in a planetary mill. The hydrided titanium powder was dehydrided and then sieved to obtain a particle size between 37 and 125{mu}m in order to compare it with a commercial powder produced by chemical reduction with a particle size lower than 150{mu}m. Cylindrical green compacts were obtained by uniaxial pressing of the powders at 343 MPa and sintering in vacuum. The powders and the density of sintered compacts were characterized, the oxygen content was measured and in vivo tests were performed in the tibia bones of Wistar rats in order to evaluate their biocompatibility. No differences were observed between the materials which were produced either with powders obtained by the hydride-dehydride method or with commercial powders produced by chemical reduction regarding modifications in compactation, sintering and biological behaviour.

  20. Structural stability of complex hydrides LiBH4 revisited

    DEFF Research Database (Denmark)

    Lodziana, Zbigniew; Vegge, Tejs


    A systematic approach to study the phase stability of LiBH4 based on ab initio calculations is presented. Three thermodynamically stable phases are identified and a new phase of Cc symmetry is proposed for the first time for a complex hydride. The x-ray diffraction pattern and vibrational spectra...

  1. Hydridic and electrocatalytic properties of hypo-hyper-d-electronic combinations of transition metal intermetallic phases

    Energy Technology Data Exchange (ETDEWEB)

    Jaksic, J.M. [University of Belgrade (Yugoslavia). Dept. of Chemistry; Krstajic, N.V.; rgur, B.N.; Jaksic, M.M. [University of Belgrade (Yugoslavia). Faculty of Technology and Metallurgy


    Hydridic and electrocatalytic properties of hypo-hyper-d-electronic combinations of transition metals in their intermetallic phases and alloys for the hydrogen storage, hydridic batteries and its electrode reactions (HELR) have been considered in the light of Fermi dynamics (or the electronic density of states), work function and the Brewer or Miedema intermetallic bonding theory (structural factors). It has been pointed out that such an intermetallic hypo-hyper-d-electronic interaction of transition metals (or the doped effect of a hyper-d- upon the bulk or surface of a hypo-d-electronic metal, or vice versa), which leads to the defined optimal mutual (bulk or surface) electronic density of states for both hydridic storage and/or electrocatalytic reaction (cathodic evolution (HER) and/or anodic oxidation (HOR) of hydrogen), imposes the same catalytic effect as the Non-Faradaic promotion by induced polarization, or the so-called NEMCA effect (Non-Faradaic Electrochemical Modification of Catalytic Activity). The main impact has been imposed on the most promising hydridic battery system (Ti-Ni crystalline and sintered), as well as on typical electrocatalytic issues (Mo-Co, Mo-Ni, Zr-Ni). (author)

  2. Investigations of intermetallic alloy hydriding mechanisms. Annual progress report, May 1 1979-April 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Livesay, B.R.; Larsen, J.W.


    Investigations are being conducted on mechanisms involved with the hydrogen-metal interactions which control the absorption and desorption processes in intermetallic compounds. The status of the following investigations is reported: modeling of hydride formation; microbalance investigations; microstructure investigations; flexure experiments; resistivity experiments; and nuclear backscattering measurements. These investigations concern fundamental hydrogen interaction mechanisms involved in storage alloys.

  3. Proton and hydride affinities in excited states: magnitude reversals in proton and hydride affinities between the lowest singlet and triplet states of annulenyl and benzannulenyl anions and cations. (United States)

    Rosenberg, Martin; Ottosson, Henrik; Kilså, Kristine


    Aromaticity has importance for proton and hydride affinities in the singlet ground state (S(0)) of annulenyl anions and cations so that, e.g., cyclopentadiene is an acidic hydrocarbon. For the lowest pipi* excited triplet state (T(1)), Baird's rule concludes that annulenes with 4n pi-electrons are aromatic and those with 4n+2 pi-electrons are antiaromatic, opposite to Huckel's rule for aromaticity in S(0). Our hypothesis is now that the relative magnitudes of proton and hydride affinities of annulenyl anions and cations reverts systematically as one goes from S(0) to T(1) as a result of the opposite electron counting rules for aromaticity in the two states. Using quantum chemical calculations at the G3(MP2)//(U)B3LYP/6-311+G(d,p) level we have examined the validity of this hypothesis for eight proton and eight hydride addition reactions of anions and cations, respectively, of annulenyl and benzannulenyl type. We categorize the (4n+2)pi-electron systems in S(0) and the 4npi-electron systems in T(1) to be of A-character and 4npi-electron systems in S(0) and (4n+2)pi-electron systems in T(1) to be of AA-character (A, aromatic; AA, anti/nonaromatic). The average proton affinities of anions of A- and AA-characters in S(0) are 1447 and 1521 kJ/mol, respectively, and in T(1) they are 1365 and 1493 kJ/mol. The average hydride affinities of A- and AA-character cations in S(0) are 826 and 996 kJ/mol, and in T(1) they are 790 and 879 kJ/mol, respectively. Thus, the calculated proton and hydride affinities are in general lower for anions and cations of A-character than for those of AA-character, in good support of our hypothesis. The findings could likely be applied in synthetic organic photochemistry and other areas where excited state acid-base chemistry plays a role.

  4. Reproduction in laboratory of the morphology distribution and orientation of hydrides in different stages fuel cycle; Reproduccion en laboratorio de la morfologia, distribucion y orientacion de hidruros en distintas etapas del ciclo de combustible

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Rengel, M. A.; Gomez, F. J.; Ruiz-Hervias, J.


    In this paper, the experimental techniques employed to reproduce in the laboratory the distribution, morphology and orientation of the hydrides during the different steps of the nuclear fuel cycle are reported. A cathodic charging technique was employed to produce ZIRLO cladding samples with an homogeneous distribution of hydrides and concentrations of 150, 250, 500, 1200 and 2000 ppm of hydrogen. The treatments developed to produce radial hydride reorientation, hydride blisters and a peripheral rim of hydrides are described.

  5. Hydride generation-resonance Rayleigh scattering and SERS spectral determination of trace Bi (United States)

    Liang, Xiaojing; Wen, Guiqing; Liu, Qingye; Liang, Aihui; Jiang, Zhiliang


    In acidic solutions, Bi(III) was reduced by NaBH4 to form BiH3 gas. Using I3- graphene oxide (GO) as absorption solution, the BiH3 gas reacted with I3- to form I- that resulted in the I3- concentration decreasing. In the absence of BiH3, the I3- concentration was high, and as receptors it was closed to the surfaces of GO which was as donors. Then the surface plasmon resonance Rayleigh scattering (RRS) energy of GO transfers to I3- heavily, and results in the RRS quenching severely. With the increase of the Bi(III) concentration, the receptors and the RRS energy transfer (RRS-ET) decreased, so the RRS intensity enhanced linearly at 370 nm. The RRS intensity was linear to the Bi(III) concentration in 0.05-5.5 μmol/L, with a detection limit of 4 ng/mL Bi. A new RRS-ET spectral method was developed for the determination of trace Bi(III). Using I3- as the absorption solution, silver nanorod (AgNR) as sol substrate and Vitoria blue B (VBB) as molecular probe, a SERS method was developed for detection of Bi.


    Directory of Open Access Journals (Sweden)

    Taurista Perdana Syawitri


    Full Text Available For safety and operability concerns, the use of metal hydrides to store hydrogen appears to be particularly promising option for alternative energy at present. However, the process of adding, removing and distributing heat during the hydrogen charging/ discharging process is problematic due to the poor effective thermal conductivity of the metal hydride porous bed and the high enthalpies of H2 adsorption/desorption. Therefore, heat transfer is a critical factor affecting the performance of metal hydride hydrogen (MHR storage tanks. Over decade, many researches focused on MHR’s operating conditions and its thermal management to improve its performance.

  7. Synthesis and Reactivity of a Scandium Terminal Hydride: H2  Activation by a Scandium Terminal Imido Complex. (United States)

    Han, Xianghao; Xiang, Li; Lamsfus, Carlos A; Mao, Weiqing; Lu, Erli; Maron, Laurent; Leng, Xuebing; Chen, Yaofeng


    Dihydrogen is easily activated by a scandium terminal imido complex containing the weakly coordinated THF. The reaction proceeds through a 1,2-addition mechanism, which is distinct from the σ-bond metathesis mechanism reported to date for rare-earth metal-mediated H2 activation. This reaction yields a scandium terminal hydride, which is structurally well-characterized, being the first one to date. The reactivity of this hydride is reported with unsaturated substrates, further shedding light on the existence of the terminal hydride complex. Interestingly, the H2 activation can be reversible. DFT investigations further eludciate the mechanistic aspects of the reactivity of the scandium anilido-terminal hydride complex with PhNCS but also on the reversible H2 activation process. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Syntheses and properties of several metastable and stable hydrides derived from intermetallic compounds under high hydrogen pressure

    Energy Technology Data Exchange (ETDEWEB)

    Filipek, S.M., E-mail: [Institute of High Pressure Physics PAS, ul. Sokolowska 29, 01-142 Warsaw (Poland); Paul-Boncour, V. [ICMPE-CMTR, CNRS-UPEC, 2-8 rue Henri Dunant, 94320 Thiais (France); Liu, R.S. [Department of Chemistry, National Taiwan University, Taipei 106, Taiwan (China); Jacob, I. [Unit Nuclear Eng., Ben Gurion University of the Negev, Beer-Sheva (Israel); Tsutaoka, T. [Dept. of Sci. Educ., Grad. School of Educ., Hiroshima University, Hiroshima (Japan); Budziak, A. [Institute of Nuclear Physics PAS, 31-342 Kraków (Poland); Morawski, A. [Institute of High Pressure Physics PAS, ul. Sokolowska 29, 01-142 Warsaw (Poland); Sugiura, H. [Yokohama City University, 22-2 Seto, Kanazawa-ku, Yokohama 236-0027 (Japan); Zachariasz, P. [Institute of Electron Technology Cracow Division, ul. Zablocie 39, 30-701 Krakow (Poland); Dybko, K. [Institute of Physics, PAS, 02-668 Warsaw (Poland); Diduszko, R. [Tele and Radio Research Institute, ul. Ratuszowa 11, Warsaw (Poland)


    Brief summary of our former work on high hydrogen pressure syntheses of novel hydrides and studies of their properties is supplemented with new results. Syntheses and properties of a number of hydrides (unstable, metastable or stable in ambient conditions) derived under high hydrogen pressure from intermetallic compounds, like MeT{sub 2}, MeNi{sub 5}, Me{sub 7}T{sub 3}, Y{sub 6}Mn{sub 23} and YMn{sub 12} (where Me = zirconium, yttrium or rare earth; T = transition metal) are presented. Stabilization of ZrFe{sub 2}H{sub 4} due to surface phenomena was revealed. Unusual role of manganese in hydride forming processes is pointed out. Hydrogen induced phase transitions, suppression of magnetism, antiferromagnetic-ferromagnetic and metal-insulator or semimetal-metal transitions are described. Equations of state (EOS) of hydrides submitted to hydrostatic pressures up to 30 GPa are presented and discussed.

  9. Hydrophilic pyrazine-based phosphane ligands: synthesis and application in asymmetric hydride transfer and H2-hydrogenation of acetophenone

    NARCIS (Netherlands)

    Nikishkin, N.; Huskens, Jurriaan; Verboom, Willem


    Pyrazine-based hydrophilic phosphanes are useful ligands for the ruthenium- and rhodium-catalyzed hydrogenations of acetophenone under hydride transfer and dihydrogen conditions. The effect of alcohol additives on the catalytic, enantioselective aqueous hydrogenation of acetophenone is examined with

  10. Poisoning Experiments Aimed at Discriminating Active and Less-Active Sites of Silica-Supported Tantalum Hydride for Alkane Metathesis

    KAUST Repository

    Saggio, Guillaume


    Only 50% of the silica-supported tantalum hydride sites are active in the metathesis of propane. Indeed, more than 45% of the tantalum hydride can be eliminated by a selective oxygen poisoning of inactive sites with no significant decrease in the global turnover. Conversely, cyclopentane induces no such selective poisoning. Hence, the active tantalum hydride sites that show greater resistance to oxygen poisoning correspond to the νTa-H bands of higher wavenumbers, particularly that at 1860cm-1. These active tantalum hydride sites should correspond to tris- or monohydride species relatively far from silica surface oxygen atoms. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Effect of the Metal Hydride Tank Structure on the Reaction Heat Recovery for the Totalized Hydrogen Energy Utilization System

    National Research Council Canada - National Science Library

    Maeda, Tetsuhiko; Nakano, Akihiro; Ito, Hiroshi; Motyka, Theodore; Perez-Berrios, Jose M; Greenway, Scott


    .... In this paper, a metal hydride tank (MHT) is chosen as hydrogen storage. In the MHT, the heating and cooling from adsorption/desorption processes is used to produced heated and chilled water for building ventilation systems...

  12. Simultaneous differential scanning calorimetry and thermal desorption spectroscopy measurements for the study of the decomposition of metal hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, J.F.; Cuevas, F.; Sanchez, C. [Univ. Autonoma, Madrid (Spain). Dept de Fisica de Materiales C-IV


    An innovative experimental method to investigate the thermal decomposition of metal hydrides is presented. The method is based on an experimental setup composed of a differential scanning calorimeter connected through a capillary tube to a mass spectrometer. The experimental system allows the simultaneous determination of the heat absorbed and the hydrogen evolved from a metal hydride during thermal decomposition. This arrangement constitutes a coupled differential scanning calorimetry (DSC) and thermal desorption spectroscopy (TDS) technique. It has been applied to metal hydride materials to demonstrate the capability of the experimental system. A method to obtain the heat of decomposition of metal hydrides is described. It involves the measurement of an apparent decomposition heat as a function of the carrier gas flow. (orig.)

  13. Validation of a new library of nuclear constants of the WIMS code; Validacion de una nueva biblioteca de constantes nucleares del Codigo WIMS

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F. [Departamento de Experimentacion, Gerencia del Reactor, ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)


    The objective of the present work is to reproduce the experimental results of the thermal reference problems (benchmarks) TRX-1, TRX-2 and BAPL-1 to BAPL-3 with the WIMS code. It was proceeded in two stages, the first one consisted on using the original library of the code, while in the second one, a library that only contains the present elements in the benchmarks: H{sup 1}, O{sup 16}, Al{sup 27}, U{sup 235} and U{sup 238} was generated. To generate the present nuclear data in the WIMS library, it was used the ENDF/B-IV database and the Data processing system of Nuclear Data NJOY, the library was generated using the FIXER code. (Author)

  14. Angle-dependent hard X-ray photoemission study of Nb hydride formation in high-pressure supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Soda, Kazuo, E-mail: [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kondo, Hiroki; Yamaguchi, Kanta; Kato, Masahiko [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Shiraki, Tatsuhito; Niwa, Ken; Kusaba, Keiji; Hasegawa, Masashi [Department of Crystalline Materials Science, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Xeniya, Kozina; Ikenaga, Eiji [Japan Synchrotron Radiation Research Institute, 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)


    Highlights: • Nb hydrides in 10-GPa supercritical water are studied by photoelectron spectroscopy. • The hydride components of the Nb 3d core-level spectra are increased with the depth. • The bulk valence-band spectrum shows a split band due to the Nb–H bond formation. • The hydrides are formed in the bulk and their surfaces are covered with Nb oxides. - Abstract: Nb hydrides formation in 10-GPa supercritical water has been investigated by angle-dependent micro-beam hard X-ray photoemission spectroscopy. In the Nb 3d core-level spectra, Nb hydride components are found in the slightly high binding energy side of the metallic components, and the oxide ones are observed even though little oxides are recognized in X-ray diffraction patterns. Obtained emission-angle dependence of the Nb 3d core-level spectra of Nb hydride specimens shows that the Nb hydride components increase with the emission angle decreased i.e. the sampling depth increased, while the oxide ones decrease. The bulk valence-band spectrum is obtained by decomposing the measured valence-band spectra into a bulk and surface components with use of the emission-angle dependence of the core-level and valence-band spectra; it consists of two bands. This implies the Nb–H chemical bond formation and Nb in an oxidation state, consistent with reported band structure calculations and the observed core-level chemical shifts. Thus it is confirmed by valence-band and core-level photoelectron spectroscopy that the Nb hydrides are formed inside the specimen, irrespective to the well-known high oxidation ability of supercritical water.

  15. Validation of the methodology for determining As, Sb, Hg, and Se in the water supply in Tudela, Navarra, spain, by atomic absorption; Validacion de la metodologia para la determinacion de As, Sb, Hg, y Se en aguas de abastecimiento a Tudela (Navarra) por absorcion atomica

    Energy Technology Data Exchange (ETDEWEB)

    Gale, M. A.; Cebrian, N.; Ormad, P.; Ovelleiro, J. L.


    In compliance with the current regulations on water quality, an analytical methodology has been put in place in the laboratory of the waste water treatment plant in Tudela, Navarre (Spain) to monitor As, Sb, Hg, and Se in the water going into the public water supply. The technique used to monitor these elements is atomic absorption spectrometry, As, Sb, Se are determined by the generation of hydrides and Hg by the generation of cold vapour. In addition, in order to ensure the authenticity of the results, the methodology employed has been validated by a study of the following technical characteristics: linearity, work interval, sensitivity, precision and accuracy. Extremely satisfactory results were obtained in all cases. A linear range between 0 and 1000 mg/l for all four elements and extremely low detection and quantification limits (less than 1 mg/l) were found. In the study of the method's accuracy, the C. V. s were below the legally established minima and the method was found to be very accurate. (Author) 18 refs.

  16. Z-H Bond Activation in (Di)hydrogen Bonding as a Way to Proton/Hydride Transfer and H2 Evolution. (United States)

    Belkova, Natalia V; Filippov, Oleg A; Shubina, Elena S


    The ability of neutral transition-metal hydrides to serve as a source of hydride ion H- or proton H+ is well appreciated. The hydride ligands possessing a partly negative charge are proton accepting sites, forming a dihydrogen bond, M-Hδ- ⋅⋅⋅δ+ HX (M=transition metal or metalloid). On the other hand, some metal hydrides are able to serve as a proton source and give hydrogen bond of M-Hδ+ ⋅⋅⋅X type (X=organic base). In this paper we analyse recent works on transition-metal and boron hydrides showing i) how formation of an intermolecular complex between the reactants changes the Z-H (M-H and X-H) bond polarity and ii) what is the implication of such activation in the mechanisms of hydrides reactions. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. YNi and its hydrides: Phase stabilities, electronic structures and chemical bonding properties from first principles

    Energy Technology Data Exchange (ETDEWEB)

    Matar, S.F., E-mail: [CNRS, Universite de Bordeaux, ICMCB, 87 avenue du Docteur Albert Schweitzer, F-33608 Pessac (France); Nakhl, M. [Universite Libanaise, Laboratoire de Chimie-Physique des Materiaux LCPM, Fanar (Lebanon); Al Alam, A.F.; Ouaini, N. [Universite Saint-Esprit de Kaslik, Faculte des Sciences et de Genie Informatique, Jounieh (Lebanon); Chevalier, B. [CNRS, Universite de Bordeaux, ICMCB, 87 avenue du Docteur Albert Schweitzer, F-33608 Pessac (France)


    Graphical abstract: Base centered orthorhombic YNiH{sub X} structure. For x = 3, only H1 and H2 are present. Highest hydrogen content YNiH{sub 4} is obtained when H3 are added. - Abstract: Within density functional theory, establishing the equations of states of YNi in two different controversial structures in the literature, leads to determine the orthorhombic FeB-type as the ground state one with small energy difference. For YNiH{sub 3} and YNiH{sub 4} hydrides crystallizing in the orthorhombic CrB-type structure the geometry optimization and the ab initio determination of the H atomic positions show that the stability of hydrogen decreases from the tri- to the tetra- hydride. New states brought by hydrogen within the valence band lead to its broadening and to enhanced localization of metal density of states. The chemical bonding analysis shows a preferential Ni-H bonding versus Y-H.

  18. Fourier-Domain Analysis of Hydriding Kinetics Using Pneumato-Chemical Impedance Spectroscopy

    Directory of Open Access Journals (Sweden)

    P. Millet


    Full Text Available Analysis of phase transformation processes observed in hydrogen absorbing materials (pure metals, alloys, or compounds is still a matter of active research. Using pneumato-chemical impedance spectroscopy (PIS, it is now possible to analyze the mechanism of hydriding reactions induced by the gas phase. Experimental impedance diagrams, measured on activated LaNi5 in single- and two-phase domains, are reported in this paper. It is shown that their shape is mostly affected by the slope of the isotherm at the measurement point. By considering the details of the multistep reaction paths involved in the hydriding reaction, model impedance equations have been derived for single- and two-phase domains, and fitted to experimental impedance diagrams. The possibility of separately measuring surface and phase transformation resistances, hydrogen diffusion coefficient, and hydrogen solubility in each composition domain is discussed.

  19. Recovery Of Electrodic Powder From Spent Nickel-Metal Hydride Batteries (NiMH

    Directory of Open Access Journals (Sweden)

    Shin S.M.


    Full Text Available This study was focused on recycling process newly proposed to recover electrodic powder enriched in nickel (Ni and rare earth elements (La and Ce from spent nickel-metal hydride batteries (NiMH. In addition, this new process was designed to prevent explosion of batteries during thermal treatment under inert atmosphere. Spent nickel metal hydride batteries were heated over range of 300°C to 600°C for 2 hours and each component was completely separated inside reactor after experiment. Electrodic powder was successfully recovered from bulk components containing several pieces of metals through sieving operation. The electrodic powder obtained was examined by X-ray diffraction (XRD and energy dispersive X-ray spectroscopy (EDX and image of the powder was taken by scanning electron microscopy (SEM. It was finally found that nickel and rare earth elements were mainly recovered to about 45 wt.% and 12 wt.% in electrodic powder, respectively.

  20. Study of hydration process on silica hydride surfaces by microcalorimetry and water adsorption. (United States)

    Bocian, Szymon; Rychlicki, Gerhard; Matyska, Maria; Pesek, Joseph; Buszewski, Bogusław


    A series of hydrosilated stationary phases were compared with respect to their hydrophilic-hydrophobic properties. The stationary phases were also compared to the bare silica gel used for this synthesis. The investigations were done using microcalorimetric measurements of methanol and acetonitrile heats of immersion. Because these stationary phases are used in both the reversed-phase and aqueous normal phase modes of liquid chromatography, the excess isotherm of water from acetonitrile solution was measured. From the materials tested the highest polarity was exhibited by the silica hydride and the bare silica. The Diamond Hydride is less polar. The highest hydrophobicity is exhibited by the hydrosilated stationary phase which contains bonded octadecyl ligands. Copyright © 2013 Elsevier Inc. All rights reserved.

  1. Development of a modular room-temperature hydride storage system for vehicular applications (United States)

    Capurso, Giovanni; Schiavo, Benedetto; Jepsen, Julian; Lozano, Gustavo; Metz, Oliver; Saccone, Adriana; De Negri, Serena; Bellosta von Colbe, José M.; Klassen, Thomas; Dornheim, Martin


    The subject of this paper concerns the development of a vehicular hydrogen tank system, using a commercial interstitial metal hydride as storage material. The design of the tank was intended to feed a fuel cell in a light prototype vehicle, and the chosen hydride material, Hydralloy C5 by GfE, was expected to be able to absorb and desorb hydrogen in a range of pressure suitable for this purpose. A systematic analysis of the material in laboratory scale allows an extrapolation of the thermodynamic and reaction kinetics data. The following development of the modular tank was done according to the requirements of the prototype vehicle propulsion system and led to promising intermediate results. The modular approach granted flexibility in the design, allowing both to reach carefully the design goals and to learn the limiting factors in the sorption process. Proper heat management and suitable equipment remain key factors in order to achieve the best performances.

  2. Using magnetization measurements to detect small amounts of plutonium hydride formation in plutonium metal

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Wook [Rutgers Univ., New Brunswick, NJ (United States); Mielke, Charles H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zapf, Vivien [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Baiardo, Joseph P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mitchell, Jeremy N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Richmond, Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Schwartz, Daniel S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mun, Eun D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Smith, Alice Iulia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)


    We report the formation of plutonium hydride in 2 at % Ga-stabilized δ-Pu, with 1 atomic % H charging. We show that magnetization measurements are a sensitive, quantitative measure of ferromagnetic plutonium hydride against the nonmagnetic background of plutonium. It was previously shown that at low hydrogen concentrations, hydrogen forms super-abundant vacancy complexes with plutonium, resulting in a bulk lattice contraction. Here we use magnetization, X-ray and neutron diffraction measurements to show that in addition to forming vacancy complexes, at least 30% of the H atoms bond with Pu to precipitate PuHx, largely on the surface of the sample with x ~ 1.9. We observe magnetic hysteresis loops below 40 K with magnetic remanence, consistent with precipitates of ferromagnetic PuH1.9.

  3. A New Class of Atomically Precise, Hydride-Rich Silver Nanoclusters Co-Protected by Phosphines

    KAUST Repository

    Bootharaju, Megalamane Siddaramappa


    Thiols and phosphines are the most widely used organic ligands to attain atomically precise metal nanoclusters (NCs). Here, we used simple hydrides (e.g., H–) as ligands along with phosphines, such as triphenylphosphine (TPP), 1,2-bis(diphenylphosphino)ethane [DPPE], and tris(4-fluorophenyl)phosphine [TFPP] to design and synthesize a new class of hydride-rich silver NCs. This class includes [Ag18H16(TPP)10]2+, [Ag25H22(DPPE)8]3+, and [Ag26H22(TFPP)13]2+. Our work reveals a new family of atomically precise NCs protected by H– ligands and labile phosphines, with potentially more accessible active metal sites for functionalization and provides a new set of stable NC sizes with simpler ligand–metal bonding for researchers to explore both experimentally and computationally.

  4. Experimental characterization of Zircaloy-4 sheet deformation during combined hydriding and corrosion (United States)

    Krebs, B.; Desquines, J.; Busser, V.; Drouan, D.; Zanellato, O.


    In the frame of its research activity on nuclear fuel safety, the French "Institut de Radioprotection et de Sûreté Nucléaire" (IRSN) has been investigating the dimensional stability of fuel assemblies in Pressurized Water Reactors (PWR). Under normal operating conditions, the dimensional stability is an important performance issue for light water reactor fuel assemblies. The dimensional change results from a combined influence of oxidation, hydriding, irradiation growth and irradiation creep. In the present work, detailed studies carried out on zirconium alloys address the combined influence of oxide layer growth, hydride precipitation and thermal creep. In order to quantify the contribution of each parameter, three kinds of experiments were performed on samples cut in a recrystallized Zircaloy-4 sheet: hydrogen gaseous charging, air oxidation and steam oxidation. These experiments confirm the influence of hydrogen on sample deformation during oxidation. A basic understanding of the key mechanisms affecting the sample strain is proposed.

  5. Positive ions of the first- and second-row transition metal hydrides (United States)

    Pettersson, Lars G. M.; Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Partridge, Harry


    Theoretical dissociation energies for the first- and second-row transition metal hydride positive ions are critically compared against recent experimental values obtained from ion beam reactive scattering methods. Theoretical spectroscopic parameters and dipole moments are presented for the ground and several low-lying excited states. The calculations employ large Gaussian basis sets and account for electron correlation using the single-reference single- and double-excitation configuration interaction and coupled-pair-functional methods. The Darwin and mass-velocity contributions to the relativistic energy are included in the all-electron calculations on the first-row systems using first-order perturbation theory, and in the second-row systems using the Hay and Wadt relativistic effective core potentials. The theoretical D(0) values for the second-row transition metal hydride positive ions should provide a critical measure of the experimental values, which are not as refined as many of those in the first transition row.

  6. Evolution of deep centers in GaN grown by hydride vapor phaseepitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Z.-Q.; Look, D.C.; Jasinski, J.; Benamara, M.; Liliental-Weber, Z.; Molnar, R.J.


    Deep centers and dislocation densities in undoped n GaN, grown by hydride vapor phase epitaxy (HVPE), were characterized as a function of the layer thickness by deep level transient spectroscopy and transmission electron microscopy, respectively. As the layer thickness decreases, the variety and concentration of deep centers increase, in conjunction with the increase of dislocation density. Based on comparison with electron irradiation induced centers, some dominant centers in HVPE GaN are identified as possible point defects.

  7. MORSE Monte Carlo shielding calculations for the zirconium hydride reference reactor (United States)

    Burgart, C. E.


    Verification of DOT-SPACETRAN transport calculations of a lithium hydride and tungsten shield for a SNAP reactor was performed using the MORSE (Monte Carlo) code. Transport of both neutrons and gamma rays was considered. Importance sampling was utilized in the MORSE calculations. Several quantities internal to the shield, as well as dose at several points outside of the configuration, were in satisfactory agreement with the DOT calculations of the same.

  8. Boron-nitrogen based hydrides and reactive composites for hydrogen storage

    DEFF Research Database (Denmark)

    Jepsen, Lars H.; Ley, Morten B.; Lee, Young-Su


    Hydrogen forms chemical compounds with most other elements and forms a variety of different chemical bonds. This fascinating chemistry of hydrogen has continuously provided new materials and composites with new prospects for rational design and the tailoring of properties. This review highlights...... a range of new boron and nitrogen based hydrides and illustrates how hydrogen release and uptake properties can be improved. © 2014 Elsevier Ltd....

  9. Arrested α-hydride migration activates a phosphido ligand for C–H insertion

    Energy Technology Data Exchange (ETDEWEB)

    Hickey, Anne K. [Indiana Univ., Bloomington, IN (United States); Muñoz, Salvador B. [Indiana Univ., Bloomington, IN (United States); Lutz, Sean A. [Indiana Univ., Bloomington, IN (United States); Pink, Maren [Indiana Univ., Bloomington, IN (United States); Chen, Chun-Hsing [Indiana Univ., Bloomington, IN (United States); Smith, Jeremy M. [Indiana Univ., Bloomington, IN (United States)


    Bulky tris(carbene)borate ligands provide access to high spin iron(II) phosphido complexes. The complex PhB(MesIm)3FeP(H)Ph is thermally unstable, and we observed [PPh] group insertion into a C–H bond of the supporting ligand. An arrested α-hydride migration mechanism suggests increased nucleophilicity of the phosphorus atom facilitates [PPh] group transfer reactivity.

  10. Thermodynamics of the hydrogen dominant potassium hydride superconductor at high pressure


    Szczȩśniak, D.; Szczȩśniak, R.


    In the present paper we report comprehensive analysis of the thermodynamic properties of novel hydrogen dominant potassium hydride superconductor (KH$_{6}$). Our computations are conducted within the Eliashberg theory which yields quantitative estimations of the most important thermodynamic properties of superconducting phase. In particular, we observe, that together with the increasing pressure all the thermodynamic properties decrease, e.g. $T_{C} \\in \\left$ K for $p ...

  11. Performance of a full-scale hydrogen-storage tank based on complex hydrides. (United States)

    Johnson, Terry A; Jorgensen, Scott W; Dedrick, Daniel E


    Designing and building a full scale hydrogen storage system revealed several engineering challenges and also demonstrated the capabilities of complex hydrides. Three kg of hydrogen was stored in a four module system using modified sodium alanate as the storage media. Extensive testing of this system demonstrated the ability to follow aggressive hydrogen demand schedules that simulate actual driving. Extensive use of detailed models greatly improved the design and eventual performance of the storage system; the test data permitted further refinement of the models.

  12. Green Luminescence of Divalent Europium in the Hydride Chloride EuHCl

    NARCIS (Netherlands)

    Kunkel, Nathalie; Rudolph, Daniel; Meijerink, A; Rommel, Stefan; Weihrich, Richard; Kohlmann, Holger; Schleid, Thomas

    Luminescence properties of divalent europium in the mixed-anion hydride chloride EuHCl were studied for the first time. Olive-green single crystals of EuHCl (PbFCl-type structure: tetragonal, P4/nmm, a = 406.58(3) pm, c = 693.12(5) pm, c/a = 1.705, Z = 2) resulted from the reaction of elemental

  13. Alloys for hydrogen storage in nickel/hydrogen and nickel/metal hydride batteries (United States)

    Anani, Anaba; Visintin, Arnaldo; Petrov, Konstantin; Srinivasan, Supramaniam; Reilly, James J.; Johnson, John R.; Schwarz, Ricardo B.; Desch, Paul B.


    Since 1990, there has been an ongoing collaboration among the authors in the three laboratories to (1) prepare alloys of the AB(sub 5) and AB(sub 2) types, using arc-melting/annealing and mechanical alloying/annealing techniques; (2) examine their physico-chemical characteristics (morphology, composition); (3) determine the hydrogen absorption/desorption behavior (pressure-composition isotherms as a function of temperature); and (4) evaluate their performance characteristics as hydride electrodes (charge/discharge, capacity retention, cycle life, high rate capability). The work carried out on representative AB(sub 5) and AB(sub 2) type modified alloys (by partial substitution or with small additives of other elements) is presented. The purpose of the modification was to optimize the thermodynamics and kinetics of the hydriding/dehydriding reactions and enhance the stabilities of the alloys for the desired battery applications. The results of our collaboration, to date, demonstrate that (1) alloys prepared by arc melting/annealing and mechanical alloying/annealing techniques exhibit similar morphology, composition and hydriding/dehydriding characteristics; (2) alloys with the appropriate small amounts of substituent or additive elements: (1) retain the single phase structure, (2) improve the hydriding/dehydriding reactions for the battery applications, and (3) enhance the stability in the battery environment; and (3) the AB(sub 2) type alloys exhibit higher energy densities than the AB(sub 5) type alloys but the state-of-the-art, commercialized batteries are predominantly manufactured using Ab(sub 5) type alloys.

  14. Tailoring Thermodynamics and Kinetics for Hydrogen Storage in Complex Hydrides towards Applications. (United States)

    Liu, Yongfeng; Yang, Yaxiong; Gao, Mingxia; Pan, Hongge


    Solid-state hydrogen storage using various materials is expected to provide the ultimate solution for safe and efficient on-board storage. Complex hydrides have attracted increasing attention over the past two decades due to their high gravimetric and volumetric hydrogen densities. In this account, we review studies from our lab on tailoring the thermodynamics and kinetics for hydrogen storage in complex hydrides, including metal alanates, borohydrides and amides. By changing the material composition and structure, developing feasible preparation methods, doping high-performance catalysts, optimizing multifunctional additives, creating nanostructures and understanding the interaction mechanisms with hydrogen, the operating temperatures for hydrogen storage in metal amides, alanates and borohydrides are remarkably reduced. This temperature reduction is associated with enhanced reaction kinetics and improved reversibility. The examples discussed in this review are expected to provide new inspiration for the development of complex hydrides with high hydrogen capacity and appropriate thermodynamics and kinetics for hydrogen storage. © 2015 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Surface modification of titanium hydride with epoxy resin via microwave-assisted ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Ning, Rong [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Chen, Ding, E-mail: [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Zhang, Qianxia [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Bian, Zhibing; Dai, Haixiong; Zhang, Chi [Jiangsu Jinling Special Paint Co., Ltd., Yangzhou 225212 (China)


    Highlights: • TiH{sub 2} was modified with epoxy resin by microwave-assisted ball milling. • The epoxy ring was opened under the coupling effect of microwave and ball milling. • Microwave-assisted ball milling improved the compatibility of TiH{sub 2} with epoxy. - Abstract: Surface modification of titanium hydride with epoxy resin was carried out via microwave-assisted ball milling and the products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), thermo-gravimetry (TG) and Fourier transform infrared spectroscopy (FT-IR). A sedimentation test was performed to investigate the compatibility of the modified nano titanium hydride with the epoxy resin. The results show that the epoxy resin molecules were grafted on the surface of nano titanium hydride particles during the microwave-assisted ball milling process, which led to the improvement of compatibility between the nanoparticles and epoxy resin. According to the FT-IR, the grafting site was likely to be located around the epoxy group due to the fact that the epoxy ring was opened. However, compared with microwave-assisted ball milling, the conventional ball milling could not realize the surface modification, indicating that the coupling effect of mechanical force and microwave played a key role during the process.

  16. Edge profiles in K shell photoabsorption spectra of gaseous hydrides of 3p elements and homologues (United States)

    Hauko, R.; Gomilšek, J. Padežnik; Kodre, A.; Arčon, I.; Aquilanti, G.


    Photoabsorption spectra of gaseous hydrides of 3p elements (PH3, H2S, HCl) are measured in the energy region of photoexcitations pertaining to K edge. The analysis of the edge profile is extended to hydrides of 4p series (GeH4, AsH3, H2Se, HBr) from an earlier experiment, and to published spectra of 2p hydrides (CH4, NH3, H2O, HF) and noble gases Ar, Kr and Ne and SiH4. The edge profiles are modelled with a linear combination of lorentzian components, describing excitations to individual bound states and to continuum. Transition energies and probabilities are also calculated in the non-relativistic molecular model of the ORCA code, in good agreement with the experiment. Edge profiles in the heavier homologues are closely similar, the symmetry of the molecule governs the transitions to the lowest unoccupied orbitals. In 2p series the effect of the strong nuclear potential prevails. Transitions to higher, atomic-like levels remain very much the same as in free atoms.

  17. Stability of alkali-metal hydrides: effects of n-type doping (United States)

    Olea Amezcua, Monica Araceli; de La Peña Seaman, Omar; Rivas Silva, Juan Francisco; Heid, Rolf; Bohnen, Klaus-Peter

    Metal hydrides could be considered ideal solid-state hydrogen storage systems, they have light weight and high hydrogen volumetric densities, but the hydrogen desorption process requires excessively high temperatures due to their high stability. Efforts have been performed to improve their dehydrogenation properties, based on the introduction of defects, impurities and doping. We present a systematic study of the n-type (electronic) doping effects on the stability of two alkali-metal hydrides: Na1-xMgxH and Li1-xBexH. These systems have been studied within the framework of density functional perturbation theory, using a mixed-basis pseudopotential method and the self-consistent version of the virtual crystal approximation to model the doping. The full-phonon dispersions are analyzed for several doping content, paying special attention to the crystal stability. It is found a doping content threshold for each system, where they are close to dynamical instabilities, which are related to charge redistribution in interstitial zones. Applying the quasiharmonic approximation, the vibrational free energy, the linear thermal expansion and heat capacities are obtained for both hydrides systems and are analyzed as a function of the doping content. This work is partially supported by the VIEP-BUAP 2016 and CONACYT-México (No.221807) projects.

  18. Standardized hydrogen storage module with high utilization factor based on metal hydride-graphite composites (United States)

    Bürger, Inga; Dieterich, Mila; Pohlmann, Carsten; Röntzsch, Lars; Linder, Marc


    In view of hydrogen based backup power systems or small-scale power2gas units, hydrogen storages based on metal hydrides offer a safe and reliable solution. By using Hydralloy C5 as suitable hydride forming alloy, the present tank design guarantees very simple operating conditions: pressures between 4 bar and 30 bar, temperatures between 15 °C and 40 °C and minimal efforts for thermal management in combination with fast and constant charging and discharging capabilities. The modular tank consists of 4 layers with 5 reactor tubes each that are filled with metal hydride-graphite composites of a diameter of 21 mm. Experiments show that each layer of this tank is able to desorb the desired amount of hydrogen for a fuel cell operation at electrical power of 160 Wel for 100 min reaching a utilization factor of 93% of the stored hydrogen at RC. Furthermore, the experimental results of modularity, increasing loads and the electric air ventilation are presented.

  19. Comminution of the U-10Mo by hydriding cycles innovative process

    Energy Technology Data Exchange (ETDEWEB)

    Faeda, Kelly C.M.; Santos, Ana Maria M. dos; Paula, Joao B. de; Pereira, Edilson M.; Pedrosa, Tercio A.; Lameiras, Fernando S.; Ferraz, Wilmar B., E-mail:, E-mail: [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)


    The research, test and producing radioisotopes compact reactors were developed with the use of high levels of enriched fuel of approximately 90% of the fissile isotope U-235. Since the 80s', a policy under the context of international program RERTR (Reduced Enrichment for Research and Test Reactors) encourages the fuel replacement of the high enriched fuel by the low one of about 20 % U-235. One way to compensate the substitution for the low enrichment fuel is to employ high density metal uranium alloys. The fabrication of compact reactor fuel uses the metal matrix dispersion and, for this, uranium alloys are used in the form of powders. Despite the high densities, the metallic uranium based alloys are ductile and therefore difficult to be comminuted. Among the different comminution processes, the hydriding-dehydriding process has proved most advantageous, primarily due to their relative simplicity of processing and low manufacturing cost. In this paper, we present the results of the development of the U-10Mo alloy comminution process by the hydriding-dehydriding method on a laboratory scale. Samples of the alloy were subjected to different hydriding cycle numbers in order to verify its influence in relation to the particle size distribution of powders. Powders of different particle sizes were obtained and characterized by the physical and morphological characteristics by optical microscopy, scanning electron microscopy and X ray diffraction. The obtained results are evaluated and discussed. (author)

  20. An acidity scale of tetrafluoroborate salts of phosphonium and iron hydride compounds in [D2]dichloromethane. (United States)

    Li, Tianshu; Lough, Alan J; Morris, Robert H


    Equilibrium constants (K) for reactions between acids and the conjugate base forms of a number of phosphonium salts, [HPR3][BF4], and iron hydrides, [Fe(CO)3H(PR3)2][BF4], in CD(2)Cl(2) have been determined by means of 31P and 1H NMR spectroscopy at 20 degrees C. The anchor compound chosen for pK(CD(2)Cl(2)) determinations was [HPCy3][BF4] with a pK(CD(2)Cl(2)) value of 9.7, as assigned by literature convention (Cy: cyclohexyl). A continuous scale of pK(CD(2)Cl(2)) values covering the range from 9.7 to -3 was created and correlated with the DeltaH values reported by Angelici and co-workers and literature pK(a) values. The pK(CD(2)Cl(2)) values for 15 other hydride or dihydrogen complexes of the iron group elements and of diethyl ether were also placed on this scale. The crystal structures of [Fe(CO)3H(PCy(2)Ph)2][BF4] and [Fe(CO)3(PCy(2)Ph)2] revealed that the trans-oriented, bulky, unsymmetrical phosphane ligands distort the equatorial plane of the complexes. The acidity of iron carbonyl hydrides is an important feature of the reactions of iron hydrogenase enzymes.

  1. Mechanism of n-butane hydrogenolysis promoted by Ta-hydrides supported on silica

    KAUST Repository

    Pasha, Farhan Ahmad


    The mechanism of hydrogenolysis of alkanes, promoted by Ta-hydrides supported on silica via 2 ≡ Si-O- bonds, has been studied with a density functional theory (DFT) approach. Our study suggests that the initial monohydride (≡ Si-O-)2Ta(III)H is rapidly trapped by molecular hydrogen to form the more stable tris-hydride (≡ Si-O-) 2Ta(V)H3. Loading of n-butane to the Ta-center occurs through C-H activation concerted with elimination of molecular hydrogen (σ-bond metathesis). Once the Ta-alkyl species is formed, the C-C activation step corresponds to a β-alkyl transfer to the metal with elimination of an olefin. According to these calculations, an α-alkyl transfer to the metal to form a Ta-carbene species is of higher energy. The olefins formed during the C-C activation step can be rapidly hydrogenated by both mono- and tris-Ta-hydride species, making the overall process of alkane cracking thermodynamically favored. © 2014 American Chemical Society.

  2. Identification of the zirconium hydrides metallography in zircaloy-2; Contribucion al estudio por metalografia de los hidruros de circonio en Zircaloy-2

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Gonzalez, F.


    Technique for the Identification of the zirconium hydrides in metallographic specimens have been developed. Microhardness, quantitative estimation and relative orientation of the present hydrides as well as grain size determination of the different Zircaloy-2 tube specimens have also been made. The specimens used were corrosion- tested in water during various periods of time at 300 degree castrating, prior to the metallographic examination. Reference specimens, as received, and heavily hydride specimens in a hydrogen atmosphere at 800 degree centigrees, have been used in the previous stages of the work. No difficulties have been met in this early stage of acquaintanceship with the zirconium hydrides. (Author) 5 refs.

  3. NSRR experiment with un-irradiated uranium-zirconium hydride fuel. Design, fabrication process and inspection data of test fuel rod

    Energy Technology Data Exchange (ETDEWEB)

    Sasajima, Hideo; Fuketa, Toyoshi; Ishijima, Kiyomi; Kuroha, Hiroshi; Ikeda, Yoshikazu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Aizawa, Keiichi


    An experiment plan is progressing in the Nuclear Safety Research Reactor (NSRR) to perform pulse-irradiation with uranium-zirconium hydride (U-ZrH{sub x}) fuel. This fuel is widely used in the training research and isotope production reactor of GA (TRIGA). The objectives of the experiment are to determine the fuel rod failure threshold and to investigate fuel behavior under simulated reactivity initiated accident (RIA) conditions. This report summarizes design, fabrication process and inspection data of the test fuel rods before pulse-irradiation. The experiment with U-ZrH{sub x} fuel will realize precise safety evaluation, and improve the TRIGA reactor performance. The data to be obtained in this program will also contribute development of next-generation TRIGA reactor and its safety evaluation. (author)

  4. A thermodynamic and kinetic study of hydride transfer of a caffeine derivative. (United States)

    Han, Xiaozhen; Hao, Weifang; Zhu, Xiao-Qing; Parker, Vernon D


    One representative type of heterocyclic compound that can release a hydride ion is 7,8-dihydro-9-methylcaffeine (CAFH). The one-electron oxidation potential of CAFH [-0.294 (V vs Fc(+/0))] and the one-electron reduction potential of CAF(+) [-2.120 (V vs Fc(+/0))] were obtained using two different methods, CV and OSWV. Applying titration calorimetry data in thermodynamic cycles, the enthalpies of CAFH releasing a hydride ion [57.6 kcal/mol] and releasing a hydrogen atom [80.3 kcal/mol] and of its radical cation CAFH(•+) releasing a proton [33.0 kcal/mol] and releasing a hydrogen atom [38.4 kcal/mol] have been determined. Several conclusions can be drawn from the thermodynamic results: (1) CAFH is a very good single-electron donor whose single-electron oxidation potential is much less positive than that of NAD(P)H model compound BNAH [E(ox) = 0.219 V vs Fc(+/0)]. (2) The single-electron reduction potential of CAF(+) is much more negative than that of BNA(+) [E(red) = -1.419 V], which means that CAF(+) is not a good electron acceptor. Furthermore, CAFH is a very good hydride donor compared to BNAH. The results of non-steady-state kinetic studies, for the reaction of CAFH and AcrH(+)ClO(4)(-), show that the ratio of t(0.50)/t(0.05) is larger than 13.5 and the ratio of k(init)/k(pfo) is larger than 1. The pseudo-first-order rate constants obtained at different reaction stages decrease with the time, and the kinetic isotope was observed to be small at a short reaction time and slowly increases to 3.72 with the progress of the reaction. These kinetic results clearly display that the hydride transfer of CAFH to AcrH(+) in acetonitrile is not a one-step mechanism, while the thermodynamic results show that CAFH is a very good electron donor. The combination of the kinetic results with the thermodynamics analysis shows that the hydride transfer of the caffeine derivative CAFH takes place by a two-step reversible mechanism and there is an intermediate in the reaction.

  5. Validation of new ceramic materials from tungsten mining wastes. Mechanical properties; Validacion de nuevos materiales ceramicos a partir de rocas de desecho de mineria. Propiedades mecanicas

    Energy Technology Data Exchange (ETDEWEB)

    Duran Suarez, J. A.; Montoya Herrera, J.; Silva, A. P.; Peralbo Cano, R.; Castro-Gomes, J. P.


    New ceramic materials obtained from tungsten mining wastes, from region of Beira Interior in Portugal, with no commercial use, responsible for landscape and environmental problems are presented. These preshaped new ceramic products, prepared in a wide thermal range (800 degree centigrade to 1300 degree centigrade) was evaluated by mechanical test, but also was characterized the starting raw materials: tungsten wastes mining and industrial kaolin. Results, which also include a mineralogical characterization of ceramic products and morphologic evaluation of neoformed by scanning electron microscopy, show firstly, the feasibility of converting a large number of these wastes in marketable ceramics. Thanks to the experimentation carried out, the ability to generate ceramic materials is emphasized, without the presence of mineral clay, due to the particular composition of these waste of mining with content of acid, neutral and basic oxides. (Author)

  6. Validation of the production process of core-equipment HYNIC-Bombesin-Sn; Validacion del proceso de produccion del nucleo-equipo HYNIC-Bombesina-Sn

    Energy Technology Data Exchange (ETDEWEB)

    Rubio C, N. I. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)


    The validation process is establishing documented evidence that provides a high degree of assurance that a specific process consistently will produce a product that will meet specifications and quality attributes preset and, therefore, ensures the efficiency and effectiveness of a product. The radiopharmaceutical {sup 99m}Tc-HYNlC-Bombesin is part of the gastrin-releasing peptide (GRP) analogues of bombesin that are radiolabelled with technetium 99 metastable for molecular images obtention. Is obtained from freeze-dry formulations kits (core- equipment)) and has reported a very high stability in human serum, specific binding to receptors and rapid internalization. Biodistribution data in mice showed rapid blood clearance with predominant renal excretion and specific binding to tissues with positive response to GRP receptors. According to biokinetics studies performed on patients with breast cancer, breast show a marked asymmetry with increased uptake in neoplastic breast in healthy women and the uptake of radiopharmaceuticals is symmetrical in both breasts. No reported adverse reactions. In this paper, the prospective validation core-equipment HYNlC-Bombesin-Sn, which was shown consistently that the product meets the specifications and quality, attributes to preset from the obtained from the diagnostic radiopharmaceutical third generation: {sup 99m}Tc-HYNlC-Bombesin. The process was successfully validated and thereby ensuring the efficiency and effectiveness of this agent as a preliminary diagnostic for approval to be marketed. (Author)

  7. Test and validation of the iterative code for the neutrons spectrometry and dosimetry: NSDUAZ; Prueba y validacion del codigo iterativo para la espectrometria y dosimetria de neutrones: NSDUAZ

    Energy Technology Data Exchange (ETDEWEB)

    Reyes H, A.; Ortiz R, J. M.; Reyes A, A.; Castaneda M, R.; Solis S, L. O.; Vega C, H. R., E-mail: [Universidad Autonoma de Zacatecas, Unidad Academica de Ingenieria Electrica, Av. Lopez Velarde 801, Col. Centro, 98000 Zacatecas (Mexico)


    In this work was realized the test and validation of an iterative code for neutronic spectrometry known as Neutron Spectrometry and Dosimetry of the Universidad Autonoma de Zacatecas (NSDUAZ). This code was designed in a user graph interface, friendly and intuitive in the environment programming of LabVIEW using the iterative algorithm known as SPUNIT. The main characteristics of the program are: the automatic selection of the initial spectrum starting from the neutrons spectra catalog compiled by the International Atomic Energy Agency, the possibility to generate a report in HTML format that shows in graph and numeric way the neutrons flowing and calculates the ambient dose equivalent with base to this. To prove the designed code, the count rates of a spectrometer system of Bonner spheres were used with a detector of {sup 6}LiI(Eu) with 7 polyethylene spheres with diameter of 0, 2, 3, 5, 8, 10 and 12. The count rates measured with two neutron sources: {sup 252}Cf and {sup 239}PuBe were used to validate the code, the obtained results were compared against those obtained using the BUNKIUT code. We find that the reconstructed spectra present an error that is inside the limit reported in the literature that oscillates around 15%. Therefore, it was concluded that the designed code presents similar results to those techniques used at the present time. (Author)


    Mass spectrometry was used to detect transfer of deuterium from labeled reagents to arsines following hydride-generation reactions. The arsine gases liberated from the reactions of arsenite, arsenate, methylarsonic acid, and dimethylarsinic acid with HC1 and NaBD4 in H2O, or with...

  9. Mathematical model of a NiOOH/metal hydride cell. Final report, September 15, 1993--November 14, 1996

    Energy Technology Data Exchange (ETDEWEB)

    White, R.E.; Popov, B.N.


    One of the objectives of work on the nickel/metal hydride cell has been to develop a mathematical model of the performance of the cell. This is a summary of work to date and is meant to be a Final Report of the BES project. Mathematical model of the nickel/metal hydride cell depends on the kinetics, thermodynamics, and transport properties of the metal hydride electrode. Consequently, investigations were carried out to determine: (1) the exchange current density and the equilibrium potential as a function of hydrogen content in the electrode; (2) the hydrogen diffusion coefficient in the bulk of the alloy; (3) the hydrogen reaction rate order; (4) the symmetry factor for hydrogen evolution reaction and (5) to determine the reaction mechanisms of the hydrogen charge and discharge processes including overcharge and overdischarge mechanism.

  10. Hydrogen Storage Characteristics of Metal Hydro-Borate and Transition Element-Added Magnesium Hydride

    Energy Technology Data Exchange (ETDEWEB)

    Song, Myoung Youp; Kwak, Young Jun [Chonbuk National University, Jeonju (Korea, Republic of); Park, Hye Ryoung [Chonnam National University, Gwangju (Korea, Republic of)


    A metal hydro-borate Zn(BH{sub 4}){sub 2} was prepared by milling ZnCl{sub 2} and NaBH{sub 4} in a planetary ball mill in an Ar atmosphere. This sample contained NaCl. 95 wt% MgH{sub 2}-2.5 wt% Zn(BH{sub 4}){sub 2}-2.5 wt% Ni samples [named MgH{sub 2}-2.5Zn(BH{sub 4}){sub 2}-2.5Ni] were then prepared by milling in a planetary ball mill in a hydrogen atmosphere. The hydrogen absorption and release properties of the prepared samples were investigated. In particular, variations in the initial hydriding and dehydriding rates with temperature were examined. MgH{sub 2}-2.5Zn(BH{sub 4}){sub 2}-2.5Ni dehydrided at the fourth cycle contained Mg, MgO, and small amounts of β-MgH2 and Mg2Ni. The sample after hydriding-dehydriding cycling had a slightly smaller average particle size and a larger BET specific surface area than the sample after milling. Increasing the temperature from 573 K to 623 K led to a decrease in the initial hydriding rate. The initial dehydriding rate increased as the temperature increased from 573 K to 643 K. At 573 K under 12 bar H{sub 2}, the sample absorbed 3.85 wt% H for 2.5 min, 4.60 wt% H for 5 min, 4.64 wt% H for 10 min, and 4.80 wt% H for 60 min. The MgH{sub 2}-2.5Zn(BH{sub 4}){sub 2}-2.5Ni had an effective hydrogen storage capacity (the quantity of hydrogen absorbed for 60 min) of near 5 wt% (4.96 wt% at 593 K).

  11. Metal hydride/chemical heat-pump development project. Phase I. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Argabright, T.A.


    The metal hydride/chemical heat pump (MHHP) is a chemical heat pump containing two hydrides for the storage and/or recovery of thermal energy. It utilizes the heat of reaction of hydrogen with specific metal alloys. The MHHP design can be tailored to provide heating and/or cooling or temperature upgrading over a wide range of input and ambient temperatures. The system can thus be used with a variety of heat sources including waste heat, solar energy or a fossil fuel. The conceptual design of the MHHP was developed. A national market survey including a study of applications and market sectors was conducted. The technical tasks including conceptual development, thermal and mechanical design, laboratory verification of design and material performance, cost analysis and the detailed design of the Engineering Development Test Unit (EDTU) were performed. As a result of the market study, the temperature upgrade cycle of the MHHP was chosen for development. Operating temperature ranges for the upgrader were selected to be from 70 to 110/sup 0/C (160 to 230/sup 0/F) for the source heat and 140 to 190/sup 0/C (280 to 375/sup 0/F) for the product heat. These ranges are applicable to many processes in industries such as food, textile, paper and pulp, and chemical. The hydride pair well suited for these temperatures is LaNi/sub 5//LaNi/sub 4/ /sub 5/Al/sub 0/ /sub 5/. The EDTU was designed for the upgrade cycle. It is a compact finned tube arrangement enclosed in a pressure vessel. This design incorporates high heat transfer and low thermal mass in a system which maximizes the coefficient of performance (COP). It will be constructed in Phase II. Continuation of this effort is recommended.

  12. Reactivity of a Molecular Magnesium Hydride Featuring a Terminal Magnesium-Hydrogen Bond. (United States)

    Schnitzler, Silvia; Spaniol, Thomas P; Okuda, Jun


    The reactivity of the molecular magnesium hydride [Mg(Me3TACD·Al(i)Bu3)H] (1) featuring a terminal magnesium-hydrogen bond and an NNNN-type macrocyclic ligand, Me3TACD ((Me3TACD)H = Me3[12]aneN4 = 1,4,7-trimethyl-1,4,7,10-tetraazacyclododecane), can be grouped into protonolysis, oxidation, hydrometalation, (insertion), and hydride abstraction. Protonolysis of 1 with weak Brønsted acids HX such as terminal acetylenes, amines, silanols, and silanes gave the corresponding derivatives [Mg(Me3TACD·Al(i)Bu3)X] (X = C≡CPh, 3; HN(3,5-Me2-C6H3), 4; OSiMe3, 5; OSiPh3, 6; Cl, 7; Br, 8). Single-crystal X-ray diffraction of anilide 4 showed a square-pyramidal coordination geometry for magnesium. No correlation with the pKa values of the acids was detected. Oxidation of 1 with elemental iodine gave the iodide [Mg(Me3TACD·Al(i)Bu3)I] (9), and oxidation with nitrous oxide afforded the μ-oxo-bridged compound [{Mg(Me3TACD·Al(i)Bu3)}2(μ-O)] (10) with a linear Mg-O-Mg core, as characterized by single-crystal X-ray diffraction. The Mg-H bond reacted with benzaldehyde, benzophenone, fluorenone, and CO2 under insertion but not with the olefins 1,1,2-triphenylethylene, tert-butylethylene, and cyclopentene. The unstable formate, prepared also by salt metathesis of iodide 9 with potassium formate, revealed κO,κO' coordination in the solid state. Hydride abstraction with triphenylborane gave the ion pair [Mg(Me3TACD·Al(i)Bu3)(thf)][HBPh3] (16), which catalyzed the hydroboration of polar substrates by pinacolborane.

  13. Lithium storage in amorphous TiNi hydride: Electrode for rechargeable lithium-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Bououdina, M., E-mail: [Nanotechnology Centre, College of Science, University of Bahrain, PO Box 32038 (Bahrain); Department of Physics, College of Science, University of Bahrain, PO Box 32038 (Bahrain); Oumellal, Y.; Dupont, L.; Aymard, L. [Laboratoire de Reactivite du Solid (RCS), UMR CNRS 6007, 33 rue Saint-Leu, 80039 Amiens (France); Al-Gharni, H. [Department of Electronics, University of York, York (United Kingdom); Al-Hajry, A. [Department of Physics, College of Science and Arts, Najran University, Najran (Saudi Arabia); Maark, T.A. [Condensed Matter Theory Group, Department of Physics and Astronomy, Box 516, Uppsala University, SE-751 20 Uppsala (Sweden); De Sarkar, A. [Applied Materials Physics, Department of Materials Science and Engineering, Royal Institute of Technology (KTH), SE-100 44 Stockholm (Sweden); Ahuja, R. [Condensed Matter Theory Group, Department of Physics and Astronomy, Box 516, Uppsala University, SE-751 20 Uppsala (Sweden); Applied Materials Physics, Department of Materials Science and Engineering, Royal Institute of Technology (KTH), SE-100 44 Stockholm (Sweden); Deshpande, M.D. [Department of Physics, H.P.T. Arts and R.Y.K. Science College, Nasik 422 005, Maharashtra (India); Qian, Z. [Condensed Matter Theory Group, Department of Physics and Astronomy, Box 516, Uppsala University, SE-751 20 Uppsala (Sweden); Applied Materials Physics, Department of Materials Science and Engineering, Royal Institute of Technology (KTH), SE-100 44 Stockholm (Sweden); Rahane, A.B. [Department of Physics, H.P.T. Arts and R.Y.K. Science College, Nasik 422 005, Maharashtra (India)


    In this study, amorphous TiNi phase was successfully prepared using mechanically milling for a very short time of 8 h. HRTEM confirms the formation of amorphous phase with the presence of nanocrystalline Fe particles. After hydrogenation (30 bars of H{sub 2} for a duration of 2 h), the electrochemical reaction shows that TiNi hydride/Li cell discharges at a current of one Li for 10 h between 3 V and 0.005 V. The discharge of TiNiH electrode around x = 1 Li corresponds to a capacity of 251 mAh g{sup −1} and a hydride composition of TiNiH{sub 1.0} at an average voltage of 0.4 V. Ex-situ X-ray diffraction pattern collected at the end of the discharge shows a mixture of amorphous TiNi compound and LiH. A general mechanism for the electrochemical reaction is then proposed: α-TiNiH + Li{sup +} + e{sup −} → α-TiNi + LiH. The results from DFT calculations yield an average cell voltage of 0.396 V, which is in good agreement with the experimental pseudo-plateau occurring at 0.4 V. - Highlights: • Synthesis of amorphous TiNi in a very short time. • Hydrogenation of amorphous TiNi phase using reactive ball milling (30 bars H{sub 2}, 2 h). • A discharge capacity of 251 mAh g{sup −1} which corresponds to TiNiH{sub 1.0} at an average voltage of 0.4 V. • Using ex-situ X-ray diffraction, a mechanism has been proposed: α-TiNiH + Li{sup +} + e{sup −} → α-TiNi + LiH. • DFT results show an average cell voltage of 0.396 V.

  14. ERDA. Technique for hydrogen content and depth profile in thin film metal hydride

    Energy Technology Data Exchange (ETDEWEB)

    Jain, I.P.; Jain, Ankur; Jain, Pragya [Rajasthan Univ., Jaipur (India). Centre for Non Conventional Energy Resources


    The use of thin films for hydrogen storage has become very important as the main process of absorption and desorption of hydrogen takes place on the surface of the material. The incorporation of hydrogen into thin film form is relatively new field of research and provides an opportunity to examine a number of unusual properties, which are not visible in the bulk hydrides. Considerable amount of work has been done in our laboratory to investigate hydrogen absorption mechanism in FeTi, LaNi, and MmNi{sub 4.5}Al{sub 0.5} thin film metal hydrides. Over the past few decades thin films are analyzed using ion beam analysis techniques where an energetic incident ion provides depth information on the basis of the energy lost by it and the creation of possible secondary particles in the sample. One of the most commonly used such techniques is Rutherford Backscattering (RBS) which makes use of {alpha} particles of few MeV energy and is based on the principle of elastic scattering. One of the main drawbacks of RBS is its poor sensitivity for light elements present in a heavier matrix. Hence hydrogen cannot be detected using RBS as backscattering of ions from hydrogen is not possible. The limitations of RBS are overcome by another technique, Elastic Recoil Detection Analysis (ERDA), in which the yield and energy of particle ejected out of thin film sample under swift heavy ion beam irradiation is detected giving the quantitative information concerning the depth distribution of light elements in a sample. In the present work ERDA technique is being presented with its principle, design, working and application for hydrogen content and depth profile in thin film hydride. (orig.)

  15. Influence of hydride orientation on fracture toughness of CWSR Zr-2.5%Nb pressure tube material between RT and 300 °C (United States)

    Sharma, Rishi K.; Sunil, Saurav; Kumawat, B. K.; Singh, R. N.; Tewari, Asim; Kashyap, B. P.


    An experimental setup was designed, fabricated and used to form radial hydrides in Zr-2.5%Nb alloy pressure tube spool. The design of setup was based on ensuring a hoop stress in the spool greater than threshold stress for reorientation of hydrides in this alloy, which was achieved by manipulating the thermal expansion coefficient of the plunger and pressure tube material and diametral interference between them. The experimental setup was loaded on a universal testing machine (UTM) fitted with an environmental chamber and subjected to a temperature cycle for the stress reorientation treatment. The metallographic examination of the hydrogen charged spools subjected to stress re-orientation treatment using this set up revealed formation of predominantly radial hydrides. The variation of fracture toughness of material containing radial hydride with test temperature showed typical 'S' curve behavior with transition temperatures more than that of the material containing circumferential hydride.

  16. Development and validation of single-phase and three-phase transformer models with saturation for the analysis of harmonics in electrical power systems; Desarrollo y validacion de modelos de transformadores monofasicos y trifasicos con saturacion, para el analisis de armonicos en sistemas electricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Garcia, Ricardo


    This work allowed to develop a modeling of the transformer with saturation of the magnetic core focussed to the analysis of flows with harmonics. An experimental study was performed in three laboratories, the laboratory of the Department of Electrical Engineering of the Polytechnic University of Cataluna, and two laboratories of manufacturers of electrical equipment, SALICRV and MIMAVEN. The program of Pspice simulation was used to make the model of the experimental study allowing with it the validation of the developed model against the laboratory tests. [Spanish] Este trabajo permitio desarrollar una modelacion del transformador con saturacion del nucleo magnetico enfocado para el analisis de flujos con armonicos. Se realizo un estudio experimental en tres laboratorios, el laboratorio de el Departamento de Ingenieria Electrica de la Universidad Politecnica de Cataluna, y dos laboratorios de fabricantes de equipos electricos, SALICRV y MIMAVEN. Se utilizo el programa de simulacion Pspice para realizar la modelacion del estudio experimental permitiendo con ello la validacion del modelo desarrollado contra los ensayos de laboratorio.

  17. Metal hydrides as electrode/catalyst materials for oxygen evolution/reduction in electrochemical devices (United States)

    Bugga, Ratnakumar V. (Inventor); Halpert, Gerald (Inventor); Fultz, Brent (Inventor); Witham, Charles K. (Inventor); Bowman, Robert C. (Inventor); Hightower, Adrian (Inventor)


    An at least ternary metal alloy of the formula, AB.sub.(5-Y)X(.sub.y), is claimed. In this formula, A is selected from the rare earth elements, B is selected from the elements of groups 8, 9, and 10 of the periodic table of the elements, and X includes at least one of the following: antimony, arsenic, and bismuth. Ternary or higher-order substitutions, to the base AB.sub.5 alloys, that form strong kinetic interactions with the predominant metals in the base metal hydride are used to form metal alloys with high structural integrity after multiple cycles of hydrogen sorption.

  18. Technical and economic evaluation of hydrogen storage systems based on light metal hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Jepsen, Julian


    Novel developments regarding materials for solid-state hydrogen storage show promising prospects. These complex hydrides exhibit high mass-related storage capacities and thus great technical potential to store hydrogen in an efficient and safe way. However, a comprehensive evaluation of economic competitiveness is still lacking, especially in the case of the LiBH4 / MgH2 storage material. In this study, an assessment with respect to the economic feasibility of implementing complex hydrides as hydrogen storage materials is presented. The cost structure of hydrogen storage systems based on NaAlH4 and LiBH4 / MgH2 is discussed and compared with the conventional high pressure (700 bar) and liquid storage systems. Furthermore, the properties of LiBH4 / MgH2, so-called Li-RHC (Reactive Hydride Composite), are scientifically compared and evaluated on the lab and pilot plant scale. To enhance the reaction rate, the addition of TiCl3 is investigated and high energy ball milling is evaluated as processing technique. The effect of the additive in combination with the processing technique is described in detail. Finally, an optimum set of processing parameters and additive content are identified and can be applied for scaled-up production of the material based on simple models considering energy input during processing. Furthermore, thermodynamic, heat transfer and kinetic properties are experimentally determined by different techniques and analysed as a basis for modelling and designing scaled-up storage systems. The results are analysed and discussed with respect to the reaction mechanisms and reversibility of the system. Heat transfer properties are assessed with respect to the scale-up for larger hydrogen storage systems. Further improvements of the heat transfer were achieved by compacting the material. In this regard, the influence of the compaction pressure on the apparent density, thermal conductivity and sorption behaviour, was investigated in detail. Finally, scaled

  19. Integrated Cabin and Fuel Cell System Thermal Management with a Metal Hydride Heat Pump

    Energy Technology Data Exchange (ETDEWEB)

    Hovland, V.


    Integrated approaches for the heating and cooling requirements of both the fuel cell (FC) stack and cabin environment are critical to fuel cell vehicle performance in terms of stack efficiency, fuel economy, and cost. An integrated FC system and cabin thermal management system would address the cabin cooling and heating requirements, control the temperature of the stack by mitigating the waste heat, and ideally capture the waste heat and use it for useful purposes. Current work at the National Renewable Energy Laboratory (NREL) details a conceptual design of a metal hydride heat pump (MHHP) for the fuel cell system and cabin thermal management.

  20. Scaling at the Mott-Hubbard metal-insulator transition in yttrium hydride

    CERN Document Server

    Hoekstra, A F T; Rosenbaum, T F


    A single yttrium hydride thin film is conveniently driven through the T 0 metal-insulator transition by fine-tuning the charge carrier density n via persistent photoconductivity at low temperature. Simultaneously, electrical conductivity and Hall measurements are performed for temperatures T down to 350 mK and magnetic fields up to 14 T. A scaling analysis is applied and critical exponents, resolved separately on the metallic and insulating sides of the critical region, are determined consistently. We introduce corrections to scaling to invoke collapse of the data onto a single master curve over an extended region of the (n, T) phase diagram.

  1. High capacity V-based metal hydride electrodes for rechargeable batteries


    Yang, Heng; Weadock, Nicholas J.; Tan, Hongjin; Fultz, Brent


    We report the successful development of Ti_(29)V_(62−x)Ni_9Cr_x (x = 0, 6, 12) body centered cubic metal hydride (MH) electrodes by addressing vanadium corrosion and dissolution in KOH solutions. By identifying oxygen as the primary source of corrosion and eliminating oxygen with an Ar-purged cell, the Cr-free Ti_(29)V_(62)Ni_9 alloy electrode achieved a maximum capacity of 594 mAh g^(-1), double the capacity of commercial AB_5 MH electrodes. With coin cells designed to minimize oxygen evolut...

  2. Characterization of the whiskerlike products formed by hydriding magnesium metal powders

    DEFF Research Database (Denmark)

    Herley, P. J.; Jones, W.; Vigeholm, Bjørn


    . Their formation has been ascribed to the melting of localized aluminum impurities within the bulk magnesium to form a liquid eutectic. In the presence of sublimed magnesium vapor and hydrogen (as a carrier gas) a vapor-liquid-solid mechanism operates to produce a rapid unidirectional extension followed......The structure of filamentary crystals produced during the hydriding of magnesium powder has been studies in detail. The needles of small dimensions (typically 0.5 μm in diameter) have been identified by electron analytical techniques to be oriented microcrystals of metallic magnesium...

  3. One-step synthesis of fullerene hydride C(60)H2 via hydrolysis of acylated fullerenes. (United States)

    Tzirakis, Manolis D; Alberti, Mariza N; Nye, Leanne C; Drewello, Thomas; Orfanopoulos, Michael


    The hitherto unexplored class of acylated fullerene compounds has been shown to be excellent C(60)H2 precursors. Upon a simple treatment with basic Al2O3, they are hydrolyzed quantitatively into C(60)H2. This key feature led to the development of a new, straightforward protocol for the selective synthesis of the simplest [60]fullerene hydride, C(60)H2. This protocol may offer an advantageous alternative to previously known methods for the synthesis of C(60)H2 allowing for a rapid access to C(60)H2 in good yield and high purity without tedious separating processes.

  4. Structural, electrical and luminescent characteristics of ultraviolet light emitting structures grown by hydride vapor phase epitaxy

    Directory of Open Access Journals (Sweden)

    A.Y. Polyakov


    Full Text Available Electrical and luminescent properties of near-UV light emitting diode structures (LEDs prepared by hydride vapor phase epitaxy (HVPE were studied. Variations in photoluminescence and electroluminescence efficiency observed for LEDs grown under nominally similar conditions could be attributed to the difference in the structural quality (dislocation density, density of dislocations agglomerates of the GaN active layers, to the difference in strain relaxation achieved by growth of AlGaN/AlGaN superlattice and to the presence of current leakage channels in current confining AlGaN layers of the double heterostructure.

  5. Predicted energy densitites for nickel-hydrogen and silver-hydrogen cells embodying metallic hydrides for hydrogen storage (United States)

    Easter, R. W.


    Simplified design concepts were used to estimate gravimetric and volumetric energy densities for metal hydrogen battery cells for assessing the characteristics of cells containing metal hydrides as compared to gaseous storage cells, and for comparing nickel cathode and silver cathode systems. The silver cathode was found to yield superior energy densities in all cases considered. The inclusion of hydride forming materials yields cells with very high volumetric energy densities that also retain gravimetric energy densities nearly as high as those of gaseous storage cells.

  6. Modeling and Simulation of Used Nuclear Fuel During Transportation with Consideration of Hydride Effects and Cyclic Fatigue

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Pritam [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spears, Robert Edward [Idaho National Lab. (INL), Idaho Falls, ID (United States); Coleman, Justin Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sener, Kadir [STANEX (United States); Varma, Amit H. [STANEX (United States)


    The objective of this work is to understand the integrity of Used Nuclear Fuel (UNF) during transportation. Previous analysis work has been performed to look at the integrity of UNF during transportation but these analyses have neglected to analyze the effect of hydrides and flaws (fracture mechanics models to capture radial cracking in the cladding). In this study, the clad regions of interest are near the pellet-pellet interfaces. These regions can experience more complex stress-states than the rest of the clad during cooling and have a greater possibility to develop radially reoriented hydrides during vacuum drying.

  7. A Novel Zr-1Nb Alloy and a New Look at Hydriding

    Energy Technology Data Exchange (ETDEWEB)

    Robert D. Mariani; James I. Cole; Assel Aitkaliyeva


    A novel Zr-1Nb has begun development based on a working model that takes into account the hydrogen permeabilities for zirconium and niobium metals. The beta-Nb secondary phase particles (SPPs) in Zr-1Nb are believed to promote more rapid hydrogen dynamics in the alloy in comparison to other zirconium alloys. Furthermore, some hydrogen release is expected at the lower temperatures corresponding to outages when the partial pressure of H2 in the coolant is less. These characteristics lessen the negative synergism between corrosion and hydriding that is otherwise observed in cladding alloys without niobium. In accord with the working model, development of nanoscale precursors was initiated to enhance the performance of existing Zr-1Nb alloys. Their characteristics and properties can be compared to oxide-dispersion strengthened alloys, and material additions have been proposed to zirconium-based LWR cladding to guard further against hydriding and to fix the size of the SPPs for microstructure stability enhancements. A preparative route is being investigated that does not require mechanical alloying, and 10 nanometer molybdenum particles have been prepared which are part of the nanoscale precursors. If successful, the approach has implications for long term dry storage of used fuel and for new routes to nanoferritic and ODS alloys.

  8. Divergent synthesis routes and superconductivity of ternary hydride MgSiH6 at high pressure (United States)

    Ma, Yanbin; Duan, Defang; Shao, Ziji; Yu, Hongyu; Liu, Hanyu; Tian, Fubo; Huang, Xiaoli; Li, Da; Liu, Bingbing; Cui, Tian


    We predict a new ternary hydride MgSiH6 under high pressures, which is a metal with an ionic feature and takes on a simple cubic structure with space group P m -3 above 250 GPa. Our first-principles calculations show that the cubic MgSiH6 is a potential high-temperature superconductor with a superconducting transition temperature Tc of ˜63 K at 250 GPa. Further analysis suggests that phonon softening along mainly Γ -X and Γ -M directions induced by Fermi surface nesting plays a crucial role in the high-temperature superconductivity. Herein we propose the "triangle straight-line method" which provides a clear guide to determine the specific A + B → D type formation routes for ternary hydrides of the Mg-Si-H system and it effectively reveals two divergent paths to obtain MgSiH6 under high pressures: MgH2+SiH4→MgSiH6 and MgSi + 3 H2→MgSiH6 . This method might be applicable to all ternary compounds, which will be very significant for further experimental synthesis.

  9. Protein dynamics promote hydride tunnelling in substrate oxidation by aryl-alcohol oxidase. (United States)

    Carro, Juan; Martínez-Júlvez, Marta; Medina, Milagros; Martínez, Angel T; Ferreira, Patricia


    The temperature dependence of hydride transfer from the substrate to the N5 of the FAD cofactor during the reductive half-reaction of Pleurotus eryngii aryl-alcohol oxidase (AAO) is assessed here. Kinetic isotope effects on both the pre-steady state reduction of the enzyme and its steady-state kinetics, with differently deuterated substrates, suggest an environmentally-coupled quantum-mechanical tunnelling process. Moreover, those kinetic data, along with the crystallographic structure of the enzyme in complex with a substrate analogue, indicate that AAO shows a pre-organized active site that would only require the approaching of the hydride donor and acceptor for the tunnelled transfer to take place. Modification of the enzyme's active-site architecture by replacement of Tyr92, a residue establishing hydrophobic interactions with the substrate analogue in the crystal structure, in the Y92F, Y92L and Y92W variants resulted in different temperature dependence patterns that indicated a role of this residue in modulating the transfer reaction.

  10. Hybrid functional calculations of potential hydrogen storage material: Complex dimagnesium iron hydride

    KAUST Repository

    Ul Haq, Bakhtiar


    By employing the state of art first principles approaches, comprehensive investigations of a very promising hydrogen storage material, Mg 2FeH6 hydride, is presented. To expose its hydrogen storage capabilities, detailed structural, elastic, electronic, optical and dielectric aspects have been deeply analysed. The electronic band structure calculations demonstrate that Mg2FeH6 is semiconducting material. The obtained results of the optical bandgap (4.19 eV) also indicate that it is a transparent material for ultraviolet light, thus demonstrating its potential for optoelectronics application. The calculated elastic properties reveal that Mg2FeH6 is highly stiff and stable hydride. Finally, the calculated hydrogen (H2) storage capacity (5.47 wt.%) within a reasonable formation energy of -78 kJ mol-1, at room temperature, can be easily achievable, thus making Mg2FeH6 as potential material for practical H2 storage applications. Copyright © 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

  11. Thermodynamically neutral Kubas-type hydrogen storage using amorphous Cr(III) alkyl hydride gels. (United States)

    Morris, Leah; Trudeau, Michel L; Reed, Daniel; Book, David; Antonelli, David M


    In this paper we present amorphous chromium(III) hydride gels that show promise as reversible room temperature hydrogen storage materials with potential for exploitation in mobile applications. The material uses hydride ligands as a light weight structural feature to link chromium(III) metal centres together which act as binding sites for further dihydrogen molecules via the Kubas interaction, the mode of hydrogen binding confirmed by high pressure Raman spectroscopy. The best material possesses a reversible gravimetric storage of 5.08 wt% at 160 bar and 25 °C while the volumetric density of 78 kgH2 m(-3) compares favourably to the DOE ultimate system goal of 70 kg m(-3). The enthalpy of hydrogen adsorption is +0.37 kJ mol(-1) H2 as measured directly at 40 °C using an isothermal calorimeter coupled directly to a Sieverts gas sorption apparatus. These data support a mechanism confirmed by computations in which the deformation enthalpy required to open up binding sites is almost exactly equal and opposite to the enthalpy of hydrogen binding to the Kubas sites, and suggests that this material can be used in on-board applications without a heat management system.

  12. 2D simulation of hydride blister cracking during a RIA transient with the fuel code ALCYONE

    Directory of Open Access Journals (Sweden)

    Sercombe Jérôme


    Full Text Available This paper presents 2D generalized plain strain simulations of the thermo-mechanical response of a pellet fragment and overlying cladding during a RIA transient. A fictitious hydride blister of increasing depth (25 to 90% of the clad thickness is introduced at the beginning of the calculation. When a pre-determined hoop stress is exceeded at the clad outer surface, radial cracking of the blister is taken into account in the simulation by a modification of the mechanical boundary conditions. The hoop stress criterion is based on Finite Element simulations of laboratory hoop tensile tests performed on highly irradiated samples with a through-wall hydride blister. The response of the remaining clad ligament (beneath the cracked blister to the pellet thermal expansion is then studied. The simulations show that plastic strains localize in a band orientated at ∼45° to the radial direction, starting from the blister crack tip and ending at the clad inner wall. This result is in good agreement with the ductile shear failures of the clad ligaments observed post-RIA transients. Based on a local plastic strain failure criterion in the shear band, ALCYONE simulations are then used to define the enthalpy at failure in function of the blister depth.

  13. Pyrolysis of diisopropylantimony hydride: A new precursor for organometallic vapor phase epitaxy (United States)

    Hill, C. W.; Tao, M.; Gedridge, R. W.; Stringfellow, G. B.


    The pyrolysis of diisopropylantimony hydride (DIPSbH), (C3H7)2SbH, has been studied in an isothermal flow-tube reactor. The reaction products in H2, D2, and He carrier gases were studied using a time-of-flight mass spectrometer. T50 for this compound (200‡C) is significantly lower than that of other antimony sources, such as trimethylantimony (450‡C). In addition to the hydride, the decomposition of diisopropylantimony deuteride (DIPSbD), (C3H7)2SbD, was studied to provide insight into the pyrolysis mechanism. The rate limiting step was found to be first-order and is believed to be a reductive elimination reaction which produces C3H8 in the case of DIPSbH and C3H7D in the case of DIPSbD. An increase in the ratio of [C3H6] to [C3H8] was observed as the temperature was increased from 200 to 275‡C, indicating that other reactions, possibly Β-hydrogen elimination, are important as well. The reaction rate and the products produced were not affected by changing the carrier gas. The temperature dependence of the vapor pressure was determined and is described by the equation log (P)(Torr) = 7.948-2100/T(l/K).

  14. High-pressure synthesis of Mg{sub 2}FeH{sub 6} complex hydride

    Energy Technology Data Exchange (ETDEWEB)

    Retuerto, M.; Sanchez-Benitez, J.; Alonso, J.A. [Instituto de Ciencia de Materiales de Madrid, C.S.I.C., Cantoblanco E-28049 Madrid (Spain); Rodriguez-Canas, E. [Servicio Interdepartamental de Investigacion, Facultad de Ciencias, Universidad Autonoma de Madrid, Cantoblanco E-28049 Madrid (Spain); Serafini, D. [Departamento de Fisica, Facultad de Ciencias, Universidad de Santiago de Chile and Center for Interdisciplinary Research in Materials, CIMAT, Av. Lib. Bernardo O' Higgins 3363, Santiago (Chile)


    We have designed a new synthesis method for the ternary metal hydride Mg{sub 2}FeH{sub 6} based on the direct reaction of simple hydrides under high-pressure conditions. Well-crystallized samples were prepared in a piston-cylinder hydrostatic press at 2 GPa and temperatures around 750 C from mixtures of MgH{sub 2} and Fe enclosed in gold or platinum capsules. Seven different samples have been prepared under different conditions. X-ray powder diffraction analysis was used to identify and assess the purity of the samples, through Rietveld analyses of the crystal structure (K{sub 2}PtCl{sub 6}-type). Mg{sub 2}FeH{sub 6} shows a cubic symmetry with space group Fm-3m. SEM images show an average particle size of 1-2 {mu}m for Mg{sub 2}FeH{sub 6}; the microcrystals present well-grown faces and display a high homogeneity of shapes and sizes. Thermogravimetric analysis has been carried out to determine not only the hydrogen desorption temperature but also the hydrogen contents. (author)

  15. Aging Effects on the Hydrogen Storage Characteristics of Li-Mg-B-N-H Complex Hydrides (United States)

    Srinivasan, Sesha; Vickers, Eric; Mulharan, James; Darkazalli, Gazi; Goswami, Yogi; Stefanakos, Elias; FLPoly-CERC Collaboration


    The aging effects on the hydrogen storage characteristics and chemical formulations of the complex hydrides are discussed in this study. The aging effects due to atmospheric events such as oxygen and moisture coverage and self-decomposition are currently under investigation. The candidate material chosen for this study is Lithium/Magnesium based complex hydride LiBH4/LiNH2/MgH2. These materials were prepared using high energy ball milling under Ar/H2 atmosphere with different milling durations. The chemical, structural and microstructural characteristics of the synthesized and aged materials were compared and investigated using TGA/DSC, FTIR, XRD, BET and SEM analytical tools. Hydrogen storage properties such as hydrogen sorption kinetics, cycle life and pressure-composition isotherm (PCI) was examined via high pressure, high temperature Sievert's type apparatus. This current study will shed light to compare and contrast the above mentioned characteristics for the aged samples practically at the same experimental conditions. Furthermore, we have investigated the relationship between the aging effects with respect to the crystallite sizes of the candidate compounds and their nano-dopant variants. We acknowledge the grant from Florida Energy Systems Consortium and support from Florida Polytechnic University.

  16. Intramolecular Vibrational Dynamics of the Asymmetric &dbond;CH2 Hydride Stretch of Isobutene. (United States)

    McWhorter; Pate


    The eigenstate-resolved, high-resolution (5 MHz) infrared spectrum of the asymmetric &dbond;CH2 hydride stretch of isobutene has been measured using an electric resonance optothermal spectrometer (EROS). This vibrational band near 3087 cm-1 was rotationally assigned with ground state microwave-infrared double-resonance spectroscopy. IVR rates from rotationally homogeneous IVR multiplets at values of total angular momentum, J ranging from J = 0 to J = 3 and Ka values of Ka = 0 to Ka = 2, were obtained. The average IVR lifetime for this vibrational mode is 105 ps and independent of rotational state. The experimental state density of the rotationless 000 vibrational state, approximately 150 states/cm-1, is in good agreement with the direct count result of 99 states/cm-1 using the C+3 v multiply sign in circle C-3 v (G36) molecular symmetry group. The lineshape profiles of the IVR multiplets are investigated in order to elucidate information concerning the dependence of IVR rates on the symmetry of the torsional wavefunction. We find that there is a common IVR rate among the various torsional symmetries. IVR lifetimes observed in the present study are compared to other asymmetric ethylenic hydride stretch IVR rates measured in our laboratory. Copyright 1999 Academic Press.

  17. Effects of the Electronic Doping In the Stability of the Metal Hydride NaH (United States)

    Olea-Amezcua, Monica-Araceli; Rivas-Silva, Juan-Francisco; de La Peña-Seaman, Omar; Heid, Rolf; Bohnen, Klaus-Peter


    Despite metal hydrides light weight and high hydrogen volumetric densities, the Hydrogen desorption process requires excessively high temperatures due to their high stability. Attempts for improvement the hydrogenation properties have been focus on the introduction of defects, impurities and doping on the metal hydride. We present a systematic study of the electronic doping effects on the stability of a model system, NaH doped with magnesium, forming the alloying system Na1-xMgxH. We use the density functional theory (DFT) and the self-consistent version of the virtual crystal approximation (VCA) to model the doping of NaH with Mg. The evolution of the ground state structural and electronic properties is analyzed as a function of Mg-content. The full-phonon dispersion, calculated by the linear response theory (LRT) and density functional perturbation theory (DFPT), is analyzed for several Mg-concentrations, paying special attention to the crystal stability and the correlations with the electronic structure. Applying the quasiharmonic approximation (QHA), the free energy from zero-point motion is obtained, and its influence on the properties under study is analyzed. This work is partially supported by the VIEP-BUAP (OMPS-EXC14-I) and CONACYT-Mexico (No. 221807) projects.

  18. First-Principles Modeling of Hydrogen Storage in Metal Hydride Systems

    Energy Technology Data Exchange (ETDEWEB)

    J. Karl Johnson


    The objective of this project is to complement experimental efforts of MHoCE partners by using state-of-the-art theory and modeling to study the structure, thermodynamics, and kinetics of hydrogen storage materials. Specific goals include prediction of the heats of formation and other thermodynamic properties of alloys from first principles methods, identification of new alloys that can be tested experimentally, calculation of surface and energetic properties of nanoparticles, and calculation of kinetics involved with hydrogenation and dehydrogenation processes. Discovery of new metal hydrides with enhanced properties compared with existing materials is a critical need for the Metal Hydride Center of Excellence. New materials discovery can be aided by the use of first principles (ab initio) computational modeling in two ways: (1) The properties, including mechanisms, of existing materials can be better elucidated through a combined modeling/experimental approach. (2) The thermodynamic properties of novel materials that have not been made can, in many cases, be quickly screened with ab initio methods. We have used state-of-the-art computational techniques to explore millions of possible reaction conditions consisting of different element spaces, compositions, and temperatures. We have identified potentially promising single- and multi-step reactions that can be explored experimentally.

  19. Nondestructive Evaluation on Hydrided LWR Fuel Cladding by Small Angle Incoherent Neutron Scattering of Hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Yong [ORNL; Qian, Shuo [ORNL; Littrell, Ken [ORNL; Parish, Chad M [ORNL; Bell, Gary L [ORNL; Plummer, Lee K [ORNL


    A non-destructive neutron scattering method was developed to precisely measure the uptake of total hydrogen in nuclear grade Ziraloy-4 cladding. The hydriding apparatus consists of a closed stainless steel vessel that contains Zr alloy specimens and H gas. By controlling the initial H gas pressure in the vessel and the temperature profile, target H concentrations from tens of ppm to a few thousands of wppm have been successfully achieved. Following H charging, the H content of the hydrided specimens was measured using the vacuum hot extraction method (VHE), by which the samples with desired H concentration were selected for the neutron study. Small angle neutron incoherent scattering (SANIS) were performed in the High Flux Isotope Reactor at Oak Ridge national Laboratory (ORNL). Our study indicates that a very small amount ( 20 ppm) H in commercial Zr cladding can be measured very accurately in minutes for a wide range of H concentration by a nondestructive method. The H distribution in a tube sample was obtained by scaling the neutron scattering rate with a factor, which is determined by calibration process with direct chemical analysis method on the specimen. This scale factor can be used for future test with unknown H concentration, thus provide a nondestructive method for absolute H concentration determination.

  20. Draft of M2 Report on Integration of the Hybrid Hydride Model into INL's MBM Framework for Review

    Energy Technology Data Exchange (ETDEWEB)

    Tikare, Veena; Weck, Philippe F.; Schultz, Peter Andrew; Clark, Blythe; Glazoff, Michael V.; Homer, Eric R.


    This report documents the development, demonstration and validation of a mesoscale, microstructural evolution model for simulation of zirconium hydride {delta}-ZrH{sub 1.5} precipitation in the cladding of used nuclear fuels that may occur during long-term dry storage. While the Zr-based claddings are manufactured free of any hydrogen, they absorb hydrogen during service, in the reactor by a process commonly termed ‘hydrogen pick-up’. The precipitation and growth of zirconium hydrides during dry storage is one of the most likely fuel rod integrity failure mechanisms either by embrittlement or delayed hydride cracking of the cladding. While the phenomenon is well documented and identified as a potential key failure mechanism during long-term dry storage (NUREG/CR-7116), the ability to actually predict the formation of hydrides is poor. The model being documented in this work is a computational capability for the prediction of hydride formation in different claddings of used nuclear fuels. This work supports the Used Fuel Disposition Research and Development Campaign in assessing the structural engineering performance of the cladding during and after long-term dry storage. This document demonstrates a basic hydride precipitation model that is built on a recently developed hybrid Potts-phase field model that combines elements of Potts-Monte Carlo and the phase-field models. The model capabilities are demonstrated along with the incorporation of the starting microstructure, thermodynamics of the Zr-H system and the hydride formation mechanism.

  1. The addition of organotin hydrides to isocyanates and isothiocyanates: synthesis and structure of some organotin-substituted amides

    NARCIS (Netherlands)

    Noltes, J.G.; Janssen, M.J.

    Organotin hydrides add across the carbon---nitrogen double bond of aryl isocyanates (tin---nitrogen bond formation) and hexyl isocyanate (tin---carbon bond formation) and across the carbon---sulfur double bond of phenyl isothiocyanate (tin---sulfur bond formation) to afford in excellent yield 1:1

  2. Hydride vapor phase epitaxy growth of GaN, InGaN, ScN, and ScAIN

    NARCIS (Netherlands)

    Bohnen, T.


    Chemical vapor deposition (CVD); hydride vapor phase epitaxy (HVPE); gallium nitride (GaN); indium gallium nitride (InGaN); scandium nitride (ScN); scandium aluminum nitride (ScAlN); semiconductors; thin films; nanowires; III nitrides; crystal growth - We studied the HVPE growth of different III

  3. Escherichia coli dihydrofolate reductase catalyzed proton and hydride transfers: temporal order and the roles of Asp27 and Tyr100. (United States)

    Liu, C Tony; Francis, Kevin; Layfield, Joshua P; Huang, Xinyi; Hammes-Schiffer, Sharon; Kohen, Amnon; Benkovic, Stephen J


    The reaction catalyzed by Escherichia coli dihydrofolate reductase (ecDHFR) has become a model for understanding enzyme catalysis, and yet several details of its mechanism are still unresolved. Specifically, the mechanism of the chemical step, the hydride transfer reaction, is not fully resolved. We found, unexpectedly, the presence of two reactive ternary complexes [enzyme:NADPH:7,8-dihydrofolate (E:NADPH:DHF)] separated by one ionization event. Furthermore, multiple kinetic isotope effect (KIE) studies revealed a stepwise mechanism in which protonation of the DHF precedes the hydride transfer from the nicotinamide cofactor (NADPH) for both reactive ternary complexes of the WT enzyme. This mechanism was supported by the pH- and temperature-independent intrinsic KIEs for the C-H→C hydride transfer between NADPH and the preprotonated DHF. Moreover, we showed that active site residues D27 and Y100 play a synergistic role in facilitating both the proton transfer and subsequent hydride transfer steps. Although D27 appears to have a greater effect on the overall rate of conversion of DHF to tetrahydrofolate, Y100 plays an important electrostatic role in modulating the pKa of the N5 of DHF to enable the preprotonation of DHF by an active site water molecule.

  4. Bepaling van arseen in grond m.b.v. atoomabsorptie spectrometrie in combinatie met een hydride systeem

    NARCIS (Netherlands)

    Driessen, A.C.M.; Moraal, J.C.; Werdmuller, G.A.; Veen, van der N.G.


    Het ontwikkelen van een snelle eenvoudige destruktiemethode voor de bepaling van totaal arseen in grond. Voor de bepaling van arseen in grond zijn een 10-tal destruktiemethoden onderzocht, waarbij de verkregen destruaten m.b.v. hydride-AAS bij 193.7 nm werden gemeten. Hierbij werd gebruik gemaakt

  5. Bed geometries, fueling strategies and optimization of heat exchanger designs in metal hydride storage systems for automotive applications: A review

    DEFF Research Database (Denmark)

    Mazzucco, Andrea; Dornheim, Martin; Sloth, Michael


    given to metal hydride storage tanks for light duty vehicles, since this application is the most promising one for such storage materials and has been widely studied in the literature. Enhancing cooling/heating during hydrogen uptake and discharge has found to be essential to improve storage systems...

  6. Consolidation of titanium hydride powders during the production of titanium PM parts: The effect of die wall lubricants

    CSIR Research Space (South Africa)

    Machio, Christopher N


    Full Text Available 90 (2016) 757–766 Consolidation of titanium hydride powders during the production of titanium PM parts: The effect of die wall lubricants C. Machio ⁎, R. Machaka, H.K. Chikwanda CSIR Materials Science and Manufacturing, Light Metals, PO Box...

  7. Solute hydrogen and hydride phase implications on the plasticity of zirconium and titanium alloys: a review and some recent advances (United States)

    Conforto, E.; Guillot, I.; Feaugas, X.


    In this contribution, we propose a review of the possible implications of hydrogen on mechanical behaviour of Zr and Ti alloys with emphasis on the mechanisms of plasticity and strain hardening. Recent advances on the impact of oxygen and hydrogen on the activation volume show that oxygen content hinders creep but hydrogen partially screens this effect. Both aspects are discussed in terms of a locking-unlocking model of the screw dislocation mobility in prismatic slip. Additionally, possible extension of this behaviour is suggested for the slip. The low hydrogen solubility in both Zr and Ti leads in many cases to hydride precipitation. The nature of these phases depends on the hydrogen content and can show crystallographic orientation relationships with the hexagonal compact structure of the alloys. Some advances on the thermal stability of these phases are illustrated and discussed in relation with the deepening of the misfit dislocations. Under tensile loading, we showed that hydrides enhance the hardening process in relation with internal stress due to strain incompatibilities between the Zr and Ti matrix and hydride phases. Different plastic yielding processes of hydrides were identified, which progressively reduce these strain incompatibilities. This article is part of the themed issue 'The challenges of hydrogen and metals'.

  8. Sample preparation for arsenic speciation analysis in baby food by generation of substituted arsines with atomic absorption spectrometry detection

    Czech Academy of Sciences Publication Activity Database

    Huber, C. S.; Vale, M. G. R.; Dessuy, M. B.; Svoboda, Milan; Musil, Stanislav; Dědina, Jiří


    Roč. 175, DEC (2017), s. 406-412 ISSN 0039-9140 R&D Projects: GA MŠk(CZ) LH15174 Institutional support: RVO:68081715 Keywords : slurry sampling * methyl-substituted arsenic species * hydride generation-cryotrapping-atomic absorption spectrometry Subject RIV: CB - Analytical Chemistry, Separation OBOR OECD: Analytical chemistry Impact factor: 4.162, year: 2016

  9. Continuous/Batch Mg/MgH2/H2O-Based Hydrogen Generator (United States)

    Kindler, Andrew; Huang, Yuhong


    A proposed apparatus for generating hydrogen by means of chemical reactions of magnesium and magnesium hydride with steam would exploit the same basic principles as those discussed in the immediately preceding article, but would be designed to implement a hybrid continuous/batch mode of operation. The design concept would simplify the problem of optimizing thermal management and would help to minimize the size and weight necessary for generating a given amount of hydrogen.

  10. Heat exchanger selection and design analyses for metal hydride heat pump systems

    DEFF Research Database (Denmark)

    Mazzucco, Andrea; Voskuilen, Tyler G.; Waters, Essene L.


    This study presents a design analysis for the development of highly efficient heat exchangers within stationary metal hydride heat pumps. The design constraints and selected performance criteria are applied to three representative heat exchangers. The proposed thermal model can be applied to select...... the most efficient heat exchanger design and provides outcomes generally valid in a pre-design stage. Heat transfer effectiveness is the principal performance parameter guiding the selection analysis, the results of which appear to be mildly (up to 13%) affected by the specific Nusselt correlation used....... The thermo-physical properties of the heat transfer medium and geometrical parameters are varied in the sensitivity analysis, suggesting that the length of independent tubes is the physical parameter that influences the performance of the heat exchangers the most. The practical operative regions for each...

  11. Li4FeH6: Iron-containing complex hydride with high gravimetric hydrogen density

    Directory of Open Access Journals (Sweden)

    Hiroyuki Saitoh


    Full Text Available Li4FeH6, which has the highest gravimetric hydrogen density of iron-containing complex hydrides reported so far, is synthesized by hydrogenation of a powder mixture of iron and LiH above 6.1 GPa at 900 °C. In situ synchrotron radiation X-ray diffraction measurements reveal that while kinetics require high temperature and thus high pressure for the synthesis, Li4FeH6 is expected to be thermodynamically stable slightly below room temperature at ambient pressure; further synthetic studies to suppress the kinetic effects may enable us to synthesize Li4FeH6 at moderate pressures. Li4FeH6 can be recovered at ambient conditions where Li4FeH6 is metastable.

  12. Silicon hydride nanocrystals as catalysts for proton production in water-organic liquid mixtures

    KAUST Repository

    Chaieb, Sahraoui


    Embodiments of the present methods may be used to produce energy in the form of an electrical current from water without the use of fossil fuel. Silicon hydride is very easy to make. This procedure in conjunction with an enzyme to produce hydrogen gas for fuel cells and other small devices. In fuel cells the production of protons may be bypassed, and an oxidant such as permanganate or oxygen from air may be used to drive the fuel cells. In such an embodiment, an intermediate reaction may not be needed to produce protons. In one embodiment, membrane-less laminar flow fuel cells with an external grid for oxygen supply from the air may be used.

  13. Different failure modes for V-containing and V-free AB2 metal hydride alloys (United States)

    Young, K.; Wong, D. F.; Yasuoka, S.; Ishida, J.; Nei, J.; Koch, J.


    Failure modes of a V-containing and a V-free AB2 Laves phase-based metal hydride alloy were studied by the combination of X-ray diffractometer, scanning electron microscope, X-ray energy dispersive spectroscopy, inductively coupled plasma, Soxhlet extraction, and magnetic susceptibility measurement. Cells with the V-containing alloy exhibited less capacity degradation up until venting occurred in the cells, after which the capacity rapidly degraded. Cells with the V-free alloy remained linear in capacity degradation throughout the cycle life test. The failure mechanism for the V-containing alloy is related to the formation of an oxide layer that penetrates deeper into the alloy particles due to high V leaching and impedes gas recombination, while the failure mechanism for the V-free alloy is related to the continuous pulverization of the main AB2 phase.

  14. Control of PDMS crosslinking by encapsulating a hydride crosslinker in a PMMA microcapsule

    DEFF Research Database (Denmark)

    Ma, Baoguang; Hansen, Jens Henrik; Hvilsted, Søren


    crosslinker in a PMMA shell. Microcapsules are mixed with vinyl-terminated PDMS to create a gelation system, which allows for storage at 50 °C, without premature gelation, and in addition allows for extensive crosslinking reaction at 120 °C. Both visual observations and rheological studies show that a robust...... PDMS elastomer is obtained upon heating the gelation system. Furthermore, the influence of stoichiometric imbalance on the equilibrium storage modulus of the PDMS network is investigated, by employing different amounts of microcapsules in vinyl-terminated PDMS. It has been found that adding...... microcapsules increases the equilibrium storage modulus of the PDMS elastomer until the diffusion of the hydride crosslinker is constricted. An optimum amount of crosslinker used in the control crosslinking reaction has also been found. However, compared to the pure PDMS elastomer, the modulus of the PDMS...

  15. Metal Hydrides, MOFs, and Carbon Composites as Space Radiation Shielding Mitigators (United States)

    Atwell, William; Rojdev, Kristina; Liang, Daniel; Hill, Matthew


    Recently, metal hydrides and MOFs (Metal-Organic Framework/microporous organic polymer composites - for their hydrogen and methane storage capabilities) have been studied with applications in fuel cell technology. We have investigated a dual-use of these materials and carbon composites (CNT-HDPE) to include space radiation shielding mitigation. In this paper we present the results of a detailed study where we have analyzed 64 materials. We used the Band fit spectra for the combined 19-24 October 1989 solar proton events as the input source term radiation environment. These computational analyses were performed with the NASA high energy particle transport/dose code HZETRN. Through this analysis we have identified several of the materials that have excellent radiation shielding properties and the details of this analysis will be discussed further in the paper.

  16. London penetration depth and thermal fluctuations in the sulphur hydride 203 K superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Talantsev, E.F.; Crump, W.P. [Robinson Research Institute, Victoria University of Wellington, Lower Hutt (New Zealand); Storey, J.G.; Tallon, J.L. [Robinson Research Institute, Victoria University of Wellington, Lower Hutt (New Zealand); MacDiarmid Institute for Advanced Materials and Nanotechnology, Lower Hutt (New Zealand)


    Recently, compressed H{sub 2}S has been shown to become superconducting at 203 K under a pressure of 155 GPa. One might expect fluctuations to dominate at such temperatures. Using the magnetisation critical current, we determine the ground-state London penetration depth, λ{sub 0} = 189 nm, and the superconducting energy gap, Δ{sub 0} = 27.8 meV, and find these parameters are similar to those of cuprate superconductors. We also determine the fluctuation temperature scale, T{sub fluc} = 1470 K, which shows that, unlike the cuprates, T{sub c} of the hydride is not limited by fluctuations. This is due to its three dimensionality and suggests the search for better superconductors should refocus on three-dimensional systems where the inevitable thermal fluctuations are less likely to reduce the observed T{sub c}. (copyright 2016 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  17. Nickel/metal hydride batteries using rate-earth hydrogen storage alloy (United States)

    Chen, J.; Zhang, Y. S.


    Fine particles of a hydrogen storage alloy (LaNi3.8Co0.5Mn0.4Al0.3) were microencapsulated with a thin film of nickel of about 0.6 micron thickness. The microencapsulated alloy powders were used as an anode material in a sealed nickel/metal hydride battery. The battery characteristics were compared with those of a battery with a bare (uncoated) alloy anode. The battery using the bare alloy was less stable compared to the coated alloy due to the role of the coated nickel as an oxygen barrier for protecting the alloy surface from oxidation. In addition, charge- discharge characteristics were improved greatly by the nickel coating, especially at high rates and at low temperatures due to the role of nickel as a microcurrent collector. So the microencapsulation of the alloy powders improves the performances of the alloy electrode.

  18. The self-healing of defects induced by the hydriding phase transformation in palladium nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ulvestad, A.; Yau, A.


    Nanosizing can dramatically alter material properties by enhancing surface thermodynamic contributions, shortening diffusion lengths, and increasing the number of catalytically active sites per unit volume. These mechanisms have been used to explain the improved properties of catalysts, battery materials, plasmonic materials, etc. Here we show that Pd nanoparticles also have the ability to self-heal defects in their crystal structures. Using Bragg coherent diffractive imaging, we image dislocations nucleated deep in a Pd nanoparticle during the forward hydriding phase transformation that heal during the reverse transformation, despite the region surrounding the dislocations remaining in the hydrogen-poor phase. We show that defective Pd nanoparticles exhibit sloped isotherms, indicating that defects act as additional barriers to the phase transformation. Our results resolve the formation and healing of structural defects during phase transformations at the single nanoparticle level and offer an additional perspective as to how and why nanoparticles differ from their bulk counterparts.

  19. Ring-Shaped Phosphinoamido-Magnesium-Hydride Complexes: Syntheses, Structures, Reactivity, and Catalysis. (United States)

    Fohlmeister, Lea; Stasch, Andreas


    A series of magnesium(II) complexes bearing the sterically demanding phosphinoamide ligand, L(-) =Ph2 PNDip(-) , Dip=2,6-diisopropylphenyl, including heteroleptic magnesium alkyl and hydride complexes are described. The ligand geometry enforces various novel ring and cluster geometries for the heteroleptic compounds. We have studied the stoichiometric reactivity of [(LMgH)4 ] towards unsaturated substrates, and investigated catalytic hydroborations and hydrosilylations of ketones and pyridines. We found that hydroborations of two ketones with pinacolborane using various Mg precatalysts is very rapid at room temperature with very low catalyst loadings, and ketone hydrosilylation using phenylsilane is rapid at 70 °C. Our studies point to an insertion/σ-bond metathesis catalytic cycle of an in situ formed "MgH2 " active species. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Formation and Reactivity of a Molecular Magnesium Hydride with a Terminal Mg-H Bond. (United States)

    Schnitzler, Silvia; Spaniol, Thomas P; Maron, Laurent; Okuda, Jun


    A complex featuring a terminal magnesium hydride bond supported by an NNNN macrocyclic ligand, [Mg{Me3 TACD⋅Al(iBu)3}H] (3), was formed from its labile Al(iBu)3 adduct. Use of Al(iBu)3 to block the amido nitrogen of the NNNN macrocyclic ligand was essential to prevent aggregation. The structurally characterized compound 3 reacted with BH3 to give the BH4 derivative, whereas Me3 SiCCH and PhSiH3 led to the corresponding acetylide and silyl derivative under H2 elimination. Pyridine is inserted into the MgH bond to give selectively the 1,4-dihydropyridinate. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Reviews on the Japanese Patent Applications Regarding Nickel/Metal Hydride Batteries

    Directory of Open Access Journals (Sweden)

    Taihei Ouchi


    Full Text Available The Japanese Patent Applications filed on the topic of nickel/metal hydride (Ni/MH batteries have been reviewed. Patent applications filed by the top nine battery manufacturers (Matsushita, Sanyo, Hitachi Maxell, Yuasa, Toshiba, FDK, Furukawa, Japan Storage, and Shin-kobe, five component suppliers (Tanaka, Mitsui, Santoku, Japan Metals & Chemicals Co. (JMC, and Shin-Etsu, and three research institutes (Industrial Research Institute (ISI, Agency of Industrial Science and Technology (AIST, and Toyota R & D were chosen as the main subjects for this review, based on their production volume and contribution to the field. By reviewing these patent applications, we can have a clear picture of the technology development in the Japanese battery industry. These patent applications also provide insights, know-how, and future directions for engineers and scientists working in the rechargeable battery field.

  2. Decomposition kinetics study of zirconium hydride by interrupted thermal desorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Mingwang; Liang, Li; Tang, Binghua; Xiang, Wei; Wang, Yuan; Cheng, Yanlin; Tan, Xiaohua, E-mail:


    Highlights: • Interrupted TDS was applied to investigate the mechanism of ZrH{sub 2} decomposition. • The activation energies for the five desorption peaks were determined. • The origins of the five desorption peaks were identified. • The γZrH phase was observed at ambient conditions. - Abstract: Thermal desorption kinetics of zirconium hydride powder were studied using thermogravimetry and simultaneous thermal desorption spectroscopy. The activation energies for observed desorption peaks were estimated according to Kissinger relation. The intermediate phase composition was studied using X-ray diffraction by rapid cooling on different stages of heating. The origins of the peaks were described as the equilibrium hydrogen pressure of a number of consecutive phase regions that decomposition reaction passed through. The zirconium monohydride γZrH was observed for extended periods of time at ambient conditions, which has been supposed to be metastable for a long time.

  3. Performance of a metal hydride store on the "Ross Barlow" hydrogen powered canal boat. (United States)

    Bevan, A I; Züttel, A; Book, D; Harris, I R


    This project involved the conversion of a British Waterways maintenance craft to a canal boat, powered by a combination of a solid-state hydrogen store, Proton Exchange Membrane (PEM) fuel cell, lead-acid battery pack and a high-efficiency, permanent magnet (NdFeB) electric motor. These replaced the conventional diesel engine thus eliminating water, noise, local and general atmospheric pollution. The "Protium" project applies modern technologies to a traditional mode of transportation. The TiMn2-based metal hydride store exhibited excellent performance as an effective means of storing 4 kg of hydrogen with a suitable desorption flow rate and temperature adequate for the operation of a 1 kW PEM fuel cell in a water-based environment.

  4. Delayed hydride cracking in zircaloy fuel cladding-an IAEA coordinated research programme

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, C. [AECL, Chalk River (Canada); Grigoriev, V. [Studsvik, Nykoeping (Sweden); Inozemtsev, V. [IAEA, Vienna (Austria); Markelov, V. [VNIINM, Moscow (Russian Federation); Roth, M. [INR, Saclay (France); Makarevicius, V. [LEI, Kaunas (Lithuania); Kim, Y. S. [KAERI, Daejeon (Korea, Republic of); Ali, Kanwar Liagat [PINS, TU Wien (Austria); Chakravartty, J. K. [BARC, Mumbai (India); Mizrahi, R. [CNEA, Buenos Aires (Argentina); Lalgudi, R. [IPEN, Rio de Janeiro (Brazil)


    The rate of delayed hydride cracking (DHC), V, has been measured in cold worked and stress relieved Zircaloy 4 fuel cladding using the Pin Loading Tension technique. At 250 .deg. C the mean value of V from 69 specimens was 3.3({+-}0.8)x10-8 m/s while the temperature dependence up to 275 .deg. C was described by Aexp(-Q/RT), where Q is 48.3 kJ/mol. No cracking or cracking at very low rates was observed at higher temperatures. The fracture surface consisted of flat fracture with no striations. The results are compared with previous results on fuel cladding and pressure tubes.

  5. Anisotropic Azimuthal Power and Temperature distribution on FuelRod. Impact on Hydride Distribution

    Energy Technology Data Exchange (ETDEWEB)

    Motta, Arthur [Pennsylvania State Univ., State College, PA (United States); Ivanov, Kostadin [Pennsylvania State Univ., State College, PA (United States); Arramova, Maria [Pennsylvania State Univ., State College, PA (United States); Hales, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States)


    The degradation of the zirconium cladding may limit nuclear fuel performance. In the high temperature environment of a reactor, the zirconium in the cladding corrodes, releasing hydrogen in the process. Some of this hydrogen is absorbed by the cladding in a highly inhomogeneous manner. The distribution of the absorbed hydrogen is extremely sensitive to temperature and stress concentration gradients. The absorbed hydrogen tends to concentrate near lower temperatures. This hydrogen absorption and hydride formation can cause cladding failure. This project set out to improve the hydrogen distribution prediction capabilities of the BISON fuel performance code. The project was split into two primary sections, first was the use of a high fidelity multi-physics coupling to accurately predict temperature gradients as a function of r, θ , and z, and the second was to use experimental data to create an analytical hydrogen precipitation model. The Penn State version of thermal hydraulics code COBRA-TF (CTF) was successfully coupled to the DeCART neutronics code. This coupled system was verified by testing and validated by comparison to FRAPCON data. The hydrogen diffusion and precipitation experiments successfully calculated the heat of transport and precipitation rate constant values to be used within the hydrogen model in BISON. These values can only be determined experimentally. These values were successfully implemented in precipitation, diffusion and dissolution kernels that were implemented in the BISON code. The coupled output was fed into BISON models and the hydrogen and hydride distributions behaved as expected. Simulations were conducted in the radial, axial and azimuthal directions to showcase the full capabilities of the hydrogen model.

  6. Studies of hydrogen absorption and desorption processes in advanced intermetallic hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Masashi


    This work is a part of the research program performed in the Department of Energy Systems, Institute for Energy Technology (Kjeller, Norway), which is focused on the development of the advanced hydrogen storage materials. The activities are aimed on studies of the mechanisms of hydrogen interactions with intermetallic alloys with focus on establishing an interrelation between the crystal structure, thermodynamics and kinetics of the processes in the metal-hydrogen systems, on the one hand, and hydrogen storage properties (capacity, rates of desorption, hysteresis). Many of the materials under investigation have potential to be applied in applications, whereas some already have been commercialised in the world market. A number of metals take up considerable amounts of hydrogen and form chemical compounds with H, metal hydrides. Unfortunately, binary hydrides are either very stable (e.g. for the rare earth metals [RE], Zr, Ti, Mg: metal R) or are formed at very high applied pressures of hydrogen gas (e.g. for the transition metals, Ni, Co, Fe, etc.: Metal T). However, hydrogenation process becomes easily reversible at very convenient from practical point of view conditions, around room temperature and at H2 pressures below 1 MPa for the two-component intermetallic alloys R{sub x}T{sub y}. This raised and maintains further interest to the intermetallic hydrides as solid H storage materials. Materials science research of this thesis is focused on studies of the reasons staying behind the beneficial effect of two non-transition elements M(i.e., In and Sn) contributing to the formation of the ternary intermetallic alloys R{sub x}T{sub y}M{sub 2}., on the hydrogen storage behaviours. Particular focus is on two aspects where the remarkable improvement of ordinary metal hydrides is achieved via introduction of In and Sn: a) Increase of the volume density of stored hydrogen in solid materials to the record high level. b) Improvement of the kinetics of hydrogen charge and

  7. Hydride reorientation and its impact on ambient temperature mechanical properties of high burn-up irradiated and unirradiated recrystallized Zircaloy-2 nuclear fuel cladding with an inner liner (United States)

    Auzoux, Q.; Bouffioux, P.; Machiels, A.; Yagnik, S.; Bourdiliau, B.; Mallet, C.; Mozzani, N.; Colas, K.


    Precipitation of radial hydrides in zirconium-based alloy cladding concomitant with the cooling of spent nuclear fuel during dry storage can potentially compromise cladding integrity during its subsequent handling and transportation. This paper investigates hydride reorientation and its impact on ductility in unirradiated and irradiated recrystallized Zircaloy-2 cladding with an inner liner (cladding for boiling water reactors) subjected to hydride reorientation treatments. Cooling from 400 °C, hydride reorientation occurs in recrystallized Zircaloy-2 with liner at a lower effective stress in irradiated samples (below 40 MPa) than in unirradiated specimens (between 40 and 80 MPa). Despite significant hydride reorientation, unirradiated recrystallized Zircaloy-2 with liner cladding containing ∼200 wppm hydrogen shows a high diametral strain at fracture (>15%) during burst tests at ambient temperature. This ductile behavior is due to (1) the lower yield stress of the recrystallized cladding materials in comparison to hydride fracture strength (corrected by the compression stress arising from the precipitation) and (2) the hydride or hydrogen-depleted zone as a result of segregation of hydrogen into the liner layer. In irradiated Zircaloy-2 with liner cladding containing ∼340 wppm hydrogen, the conservation of some ductility during ring tensile tests at ambient temperature after reorientation treatment at 400 °C with cooling rates of ∼60 °C/h is also attributed to the existence of a hydride-depleted zone. Treatments at lower cooling rates (∼6 °C/h and 0.6 °C/h) promote greater levels of hydrogen segregation into the liner and allow for increased irradiation defect annealing, both of which result in a significant increase in ductility. Based on this investigation, given the very low cooling rates typical of dry storage systems, it can be concluded that the thermal transients associated with dry storage should not degrade, and more likely should actually

  8. Thermodynamic diagnosis of the properties and mechanism of dihydropyridine-type compounds as hydride source in acetonitrile with "Molecule ID Card". (United States)

    Zhu, Xiao-Qing; Tan, Yue; Cao, Chao-Tun


    A series of 45 dihydropyridine-type organic compounds as hydride source were designed and synthesized. The thermodynamic driving forces (defined as enthalpy changes or redox potentials in this work) of the dihydropyridines to release hydride anions, hydrogen atoms (hydrogen for short), and electrons in acetonitrile, the thermodynamic driving forces of the radical cations of the dihydropyridines to release protons and hydrogens in acetonitrile, and the thermodynamic driving forces of the neutral pyridine-type radicals of the dihydropyridines to release electron in acetonitrile were determined by using titration calorimetry and electrochemical methods. The rates and activation parameters of hydride transfer from the dihydropyridines to acridinium perclorate, a well-known hydride acceptor, were determined by using UV-vis absorption spectroscopy technique. The relationship between the thermodynamic driving forces and kinetic rate of the hydride transfer was examined. Thermodynamic characteristic graph (TCG) of the dihydropyridines as an efficient "Molecule ID Card" was introduced. The TCG can be used to quantitatively diagnose or predict the characteristic chemical properties of the dihydropyridines and their various reaction intermediates. The mechanism of hydride transfer from the dihydropyridines to acridinium perclorate was diagnosed and elucidated by using the determined thermodynamic parameters and the activation parameters.

  9. Self-assembled air-stable magnesium hydride embedded in 3-D activated carbon for reversible hydrogen storage. (United States)

    Shinde, S S; Kim, Dong-Hyung; Yu, Jin-Young; Lee, Jung-Ho


    The rational design of stable, inexpensive catalysts with excellent hydrogen dynamics and sorption characteristics under realistic environments for reversible hydrogen storage remains a great challenge. Here, we present a simple and scalable strategy to fabricate a monodispersed, air-stable, magnesium hydride embedded in three-dimensional activated carbon with periodic synchronization of transition metals (MHCH). The high surface area, homogeneous distribution of MgH2 nanoparticles, excellent thermal stability, high energy density, steric confinement by carbon, and robust architecture of the catalyst resulted in a noticeable enhancement of the hydrogen storage performance. The resulting MHCH-5 exhibited outstanding hydrogen storage performance, better than that of most reported Mg-based hydrides, with a high storage density of 6.63 wt% H2, a rapid kinetics loading in storage, lithium ion batteries, and fuel cells.

  10. Formation of Gas-Phase Formate in Thermal Reactions of Carbon Dioxide with Diatomic Iron Hydride Anions. (United States)

    Jiang, Li-Xue; Zhao, Chongyang; Li, Xiao-Na; Chen, Hui; He, Sheng-Gui


    The hydrogenation of carbon dioxide involves the activation of the thermodynamically very stable molecule CO2 and formation of a C-H bond. Herein, we report that HCO2- and CO can be formed in the thermal reaction of CO2 with a diatomic metal hydride species, FeH- . The FeH- anions were produced by laser ablation, and the reaction with CO2 was analyzed by mass spectrometry and quantum-chemical calculations. Gas-phase HCO2- was observed directly as a product, and its formation was predicted to proceed by facile hydride transfer. The mechanism of CO2 hydrogenation in this gas-phase study parallels similar behavior of a condensed-phase iron catalyst. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Measurement of the enthalpy of formation of an iron pico-hydride and of its main properties (United States)

    Dufour, Jacques; Dufour, Xavier; Dioury, Fabienne; Vinko, Jenny D.


    Chemical reactions result from the outside shell electrons of the reacting species being shared in various types of combinations. Typical distances involved are tenths of nm, resulting in binding energies typically in the order of hundreds of kJ/mole (eV/atom). The synthesis of a novel “atomic system” formed from Iron and di-Hydrogen has been achieved. The measured enthalpy of formation is some 40 MJ/moleFe and the distance between the hydrogen proton and the iron nucleus is some 8 pm, hence the proposed name: Iron Pico-Hydride. This compound is a permanent electric dipole of atomic size. Pico-Hydrides could, thus, play a significant role in HT superconductivity and in super-capacitors. The synthesis is compatible with the standard model.

  12. Scattering influences in quantitative fission neutron radiography for the in situ analysis of hydrogen distribution in metal hydrides (United States)

    Börries, S.; Metz, O.; Pranzas, P. K.; Bücherl, T.; Söllradl, S.; Dornheim, M.; Klassen, T.; Schreyer, A.


    In situ neutron radiography allows for the time-resolved study of hydrogen distribution in metal hydrides. However, for a precise quantitative investigation of a time-dependent hydrogen content within a host material, an exact knowledge of the corresponding attenuation coefficient is necessary. Additionally, the effect of scattering has to be considered as it is known to violate Beer's law, which is used to determine the amount of hydrogen from a measured intensity distribution. Within this study, we used a metal hydride inside two different hydrogen storage tanks as host systems, consisting of steel and aluminum. The neutron beam attenuation by hydrogen was investigated in these two different setups during the hydrogen absorption process. A linear correlation to the amount of absorbed hydrogen was found, allowing for a readily quantitative investigation. Further, an analysis of scattering contributions on the measured intensity distributions was performed and is described in detail.

  13. Synthesis and formation process of Al2CuHx: A new class of interstitial aluminum-based alloy hydride

    Directory of Open Access Journals (Sweden)

    Hiroyuki Saitoh


    Full Text Available Aluminum-based alloy hydride Al2CuHx (x ∼ 1 is synthesized by hydrogenating Al2Cu alloy using high-temperature and high-pressure hydrogen atmosphere. Al8Cu square antiprisms in Al2Cu twist around the c axis of a tetragonal unit cell by hydrogenation. The twist enlarges the interstitial spaces for accommodating hydrogen atoms which align linearly parallel to the c axis in Al2CuHx. Thermodynamic stability of Al2CuHx results from the balance of stabilization by H 1s and Al 3sp hybridization and destabilization owing to the Fermi-level lifting upon hydrogenation. The crystal and electronic structures of Al2CuHx illustrate the formation of an interstitial hydride of aluminum-based alloy.

  14. Clean Grain Boundary Found in C14/Body-Center-Cubic Multi-Phase Metal Hydride Alloys


    Hao-Ting Shen; Kwo-Hsiung Young; Tiejun Meng; Bendersky, Leonid A


    The grain boundaries of three Laves phase-related body-center-cubic (bcc) solid-solution, metal hydride (MH) alloys with different phase abundances were closely examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and more importantly, electron backscatter diffraction (EBSD) techniques. By using EBSD, we were able to identify the alignment of the crystallographic orientations of the three major phases in the alloys (C14, bcc, and B2 structures). This finding...

  15. Methodology of U{sub 4}Zr{sub 2}Nb alloy powder passivation obtained by hydride-dehydride process

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Bruno M.; Braga, Daniel M.; Paula, Joao B.; Brito, Walter de; Ferraz, Wilmar B. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails:;;;


    The high density U-Zr-Nb uranium-based alloy is very promising to be used as a nuclear fuel not only in research reactors of low enrichment uranium but also in thermal power pressurized water reactors (PWR). This alloy needs to be processed into a powder to be useful in attainment metallic fuel plate fabrication. There are different methods to obtain powder from nuclear metallic alloy. In this study the hydride-dehydride method was chosen due to its relative simplicity and low cost fabrication. However, uranium powder is notably pyrophoric and moreover, the uranium powder in hydride form is more dangerous because of the hydrogen liberation during the burning, increasing the risk of an accident or an explosion. In this way, the U-Zr-Nb hydrided and dehydrided powders need to be passivated before its exposition to the air. The passivation is the spontaneous formation of a hard non-reactive surface film that inhibits further corrosion. This layer is usually an oxide that is a few atoms thick. In this paper the UZrNb alloy was hydrided, dehydrided and then passivated in a tubular furnace. Several thermal treatments for determining the passivation conditions were tested at times varying between 2 and 24 hours at room temperature. For these treatments a mixture of gases of 90% Ar with 10% O{sub 2}, pressurized in the range of 0.01 to 0.5 Bar was used. The obtained U-Zr-Nb passivated powders during different thermal treatments were characterized in terms of optical microscopy, scanning electronic microscopy, X-ray diffraction and then the results were discussed. All tests showed that the powders were of angular and irregular morphology. (author)

  16. High level theoretical study of binding and of the potential energy surface in benzene-hydride system

    Energy Technology Data Exchange (ETDEWEB)

    Coletti, Cecilia, E-mail: [Dipartimento di Scienze del Farmaco, Universita ' G. d' Annunzio' Chieti-Pescara, Via dei Vestini 31, 66100 Chieti (Italy); Re, Nazzareno [Dipartimento di Scienze del Farmaco, Universita ' G. d' Annunzio' Chieti-Pescara, Via dei Vestini 31, 66100 Chieti (Italy)


    Graphical abstract: In-plane minimum geometries for benzene-H{sup -} non-covalent adducts: linear adduct (left) with the hydride ion hydrogen bonded to one aromatic hydrogen; bifurcated adduct (right), with the hydride ion hydrogen bonded to two adjacent aromatic hydrogens. Highlights: Black-Right-Pointing-Pointer Theoretical study on covalent and non-covalent binding in benzene-hydride. Black-Right-Pointing-Pointer Two non-covalent stable adducts were characterized in the in-plane geometry. Black-Right-Pointing-Pointer Significant sections of the potential energy surface were determined. Black-Right-Pointing-Pointer Formation of a very stable C{sub 6}H{sub 7}{sup -} anion upon covalent binding to carbon. - Abstract: High level ab initio calculations were performed on the interaction of the hydride anion with benzene, a system of potential interest for modelling the interactions occurring in hydrogen rich planetary atmospheres. We investigated both non-covalent and covalent binding, exploring the complete basis set limit using highly correlated MP2 and CCSD(T) levels of theory. Two non-covalent minima on the potential energy surface have been characterized, and found to correspond to moderately strong hydrogen bonding interactions. To gain further insight on the nature of binding, the total interaction energy was decomposed into its physically meaningful components and selected sections of the potential energy surface were calculated. Moreover, we found that H{sup -} can easily covalently bind to one of the carbon atoms of benzene to form a stable C{sub 6}H{sub 7}{sup -} anion, a global minimum on the potential energy surface, characterized by a puckered geometry, with a carbon atom bending out of the benzene plane. A slightly less stable planar C{sub 6}H{sub 7}{sup -} structure was also identified, corresponding to the transition state for the flipping motion of the puckered species.

  17. The Improvement of Dehydriding the Kinetics of NaMgH3 Hydride via Doping with Carbon Nanomaterials

    Directory of Open Access Journals (Sweden)

    Zhong-Min Wang


    Full Text Available NaMgH3 perovskite hydride and NaMgH3–carbon nanomaterials (NH-CM composites were prepared via the reactive ball-milling method. To investigate the catalytic effect of CM on the dehydriding kinetic properties of NaMgH3 hydride, multiwall carbon nanotubes (MWCNTs and graphene oxide (GO were used as catalytic additives. It was found that dehydriding temperatures and activation energies (ΔE1 and ΔE2 for two dehydrogenation steps of NaMgH3 hydride can be greatly reduced with a 5 wt. % CM addition. The NH–2.5M–2.5G composite presents better dehydriding kinetics, a lower dehydriding temperature, and a higher hydrogen-desorbed amount (3.64 wt. %, 638 K. ΔE1 and ΔE2 can be reduced by about 67 kJ/mol and 30 kJ/mol, respectively. The results suggest that the combination of MWCNTs and GO is a better catalyst as compared to MWCNTs or GO alone.

  18. Mechanical properties and magnetocaloric effects in La(Fe, Si)13 hydrides bonded with different epoxy resins (United States)

    Zhang, Hu; Sun, YuJie; Li, YaWei; Wu, YuanYuan; Long, Yi; Shen, Jun; Hu, FengXia; Sun, JiRong; Shen, BaoGen


    The mechanical properties and magnetocaloric effect (MCE) of bonded La(Fe, Si)13 hydrides have been studied in detail. The mechanical strength increases with increasing the grade of epoxy resin from E-20 to E-51. This occurs because more pores and boundaries are filled with high grade resin since high epoxide content increases the degree of crosslinking and reduces the viscosity and shrinkage of resin. The compressive strength reaches 162 MPa for the bonded LaFe11.7Si1.3C0.2H1.8 with 3 wt. % E-51, which is 35% higher than that of bulk LaFe11.7Si1.3C0.2 compound (120 MPa). The mass ΔSM values remain almost same in bonded hydrides and are in a good agreement with the theoretical value. The maximum volumetric ΔSM values are 61.8, 58.0, and 54.7 mJ/cm3 K for bonded hydrides with epoxy resins E-20, E-44, and E-51, respectively, much higher than those of some magnetocaloric materials in same temperature range. The improved mechanical properties and large MCE indicate that bonded LaFe11.7Si1.3C0.2H1.8 is a promising material for room temperature magnetic refrigeration.

  19. Optimization and comprehensive characterization of metal hydride based hydrogen storage systems using in-situ Neutron Radiography (United States)

    Börries, S.; Metz, O.; Pranzas, P. K.; Bellosta von Colbe, J. M.; Bücherl, T.; Dornheim, M.; Klassen, T.; Schreyer, A.


    For the storage of hydrogen, complex metal hydrides are considered as highly promising with respect to capacity, reversibility and safety. The optimization of corresponding storage tanks demands a precise and time-resolved investigation of the hydrogen distribution in scaled-up metal hydride beds. In this study it is shown that in situ fission Neutron Radiography provides unique insights into the spatial distribution of hydrogen even for scaled-up compacts and therewith enables a direct study of hydrogen storage tanks. A technique is introduced for the precise quantification of both time-resolved data and a priori material distribution, allowing inter alia for an optimization of compacts manufacturing process. For the first time, several macroscopic fields are combined which elucidates the great potential of Neutron Imaging for investigations of metal hydrides by going further than solely 'imaging' the system: A combination of in-situ Neutron Radiography, IR-Thermography and thermodynamic quantities can reveal the interdependency of different driving forces for a scaled-up sodium alanate pellet by means of a multi-correlation analysis. A decisive and time-resolved, complex influence of material packing density is derived. The results of this study enable a variety of new investigation possibilities that provide essential information on the optimization of future hydrogen storage tanks.

  20. Facile synthesis of Ba(1-x)K(x)Fe2As2 superconductors via hydride route. (United States)

    Zaikina, Julia V; Batuk, Maria; Abakumov, Artem M; Navrotsky, Alexandra; Kauzlarich, Susan M


    We have developed a fast, easy, and scalable synthesis method for Ba(1-x)K(x)Fe2As2 (0 ≤ x ≤ 1) superconductors using hydrides BaH2 and KH as a source of barium and potassium metals. Synthesis from hydrides provides better mixing and easier handling of the starting materials, consequently leading to faster reactions and/or lower synthesis temperatures. The reducing atmosphere provided by the evolved hydrogen facilitates preparation of oxygen-free powders. By a combination of methods we have shown that Ba(1-x)K(x)Fe2As2 obtained via hydride route has the same characteristics as when it is prepared by traditional solid-state synthesis. Refinement from synchrotron powder X-ray diffraction data confirms a linear dependence of unit cell parameters upon K content as well as the tetragonal to orthorhombic transition at low temperatures for compositions with x < 0.2. Magnetic measurements revealed dome-like dependence of superconducting transition temperature Tc upon K content with a maximum of 38 K for x close to 0.4. Electron diffraction and high-resolution high-angle annular dark-field scanning transmission electron microscopy indicates an absence of Ba/K ordering, while local inhomogeneity in the Ba/K distribution takes place at a scale of several angstroms along [110] crystallographic direction.

  1. Next Generation Energetic Materials: New Cluster Hydrides and Metastable Alloys of Aluminum in Very Low Oxidation States (United States)


    ja4125548 | J. Am. Chem. Soc. 2014, 136, 3607−36163608 were estimated via a data analysis based on a Monte Carlo model.20,21 A comparison of measured...Blundell, and R. R. Zope, Phys. Rev. B 65, 085402 (2002). 45N. Walsh, F. Martinez, G. Marx , and L. Schweikhard, Eur. Phys. J. D 43, 241 (2007). Reuse of AIP

  2. Synthesis and characterization of amide-borohydrides: New complex light hydrides for potential hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Chater, Philip A. [School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Anderson, Paul A. [School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom)], E-mail:; Prendergast, James W. [School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Walton, Allan; Mann, Vicky S.J.; Book, David [Department of Metallurgy and Materials, School of Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); David, William I.F. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX (United Kingdom); Inorganic Chemistry Laboratory, University of Oxford, South Parks Road, Oxford OX1 3QR (United Kingdom); Johnson, Simon R.; Edwards, Peter P. [Inorganic Chemistry Laboratory, University of Oxford, South Parks Road, Oxford OX1 3QR (United Kingdom)


    The reactions xLiNH{sub 2} + (1 - x)LiBH{sub 4} and xNaNH{sub 2} + (1 - x)NaBH{sub 4} have been investigated and new phases identified. The lithium amide-borohydride system is dominated by a body centred cubic compound of formula Li{sub 4}BH{sub 4}(NH{sub 2}){sub 3}. In the sodium system, a new hydride of approximate composition Na{sub 2}BH{sub 4}NH{sub 2} has been identified with a primitive cubic structure and lattice parameter a {approx} 4.7 A. The desorption of gases from the two amide-borohydrides on heating followed a similar pattern with the relative proportions of H{sub 2} and NH{sub 3} released depending critically on the experimental set-up: in the IGA, ammonia release occurred in two steps - beginning at 60 and 260 deg. C for Li{sub 4}BH{sub 4}(NH{sub 2}){sub 3} - the second of which was accompanied by hydrogen release; in the TPD system the main desorption product was hydrogen-again at 260 deg. C for Li{sub 4}BH{sub 4}(NH{sub 2}){sub 3} accompanied by around 5% ammonia. We hypothesize that the BH{sub 4}{sup -} anion can play a similar role to LiH in the LiNH{sub 2} + LiH system, where ammonia release is suppressed in favour of hydrogen. The reaction xLiNH{sub 2} + (1 - x)LiAlH{sub 4} did not result in the production of any new phases but TPD experiments show that hydrogen is released from the mixture 2LiNH{sub 2} + LiAlH{sub 4}, over a wide temperature range. We conclude that mixed complex hydrides may provide a means of tuning the dehydrogenation and rehydrogenation reactions to make viable storage systems.

  3. FY 2016 Status Report: CIRFT Testing on Spent Nuclear Fuels and Hydride Reorientation Study

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Wang, Hong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Yan, Yong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Bevard, Bruce B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Scaglione, John M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division


    This report provides a detailed description of the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) testing conducted on spent nuclear fuel (SNF) rods in FY 2016, including hydride reorientation test results. Contact-based measurement, or three-LVDT-based curvature measurement, of SNF rods has proven to be quite reliable in CIRFT testing. However, how the linear variable differential transformer (LVDT) head contacts the SNF rod may have a significant effect on the curvature measurement, depending on the magnitude and direction of rod curvature. To correct such contact/curvature issues, sensor spacing, defined as the amount of separation between the three LVDT probes, is a critical measurement that can be used to calculate rod curvature once the deflections are obtained. Recently developed CIRFT data analyses procedures were integrated into FY 2016 CIRFT testing results for the curvature measurements. The variations in fatigue life are provided in terms of moment, equivalent stress, curvature, and equivalent strain for the tested SNFs. The equivalent stress plot collapsed the data points from all of the SNFs into a single zone. A detailed examination revealed that, at same stress level, fatigue lives display a descending order as follows: H. B. Robinson Nuclear Power Station (HBR), Limerick Nuclear Power Station (LMK), mixed uranium-plutonium oxide (MOX). If looking at the strain, then LMK fuel has a slightly longer fatigue life than HBR fuel, but the difference is subtle. The knee point of endurance limit in the curve of moment and curvature or equivalent quantities is more clearly defined for LMK and HBR fuels. The treatment affects the fatigue life of specimens. Both a drop of 12 in. and radial hydride treatment (RHT) have a negative impact on fatigue life. The effect of thermal annealing on MOX fuel rods was relatively small at higher amplitude but became significant at low amplitude of moment. Thermal annealing tended to extend the fatigue life of

  4. Conventional superconductivity at 203 kelvin at high pressures in the sulfur hydride system (United States)

    Drozdov, A. P.; Eremets, M. I.; Troyan, I. A.; Ksenofontov, V.; Shylin, S. I.


    A superconductor is a material that can conduct electricity without resistance below a superconducting transition temperature, Tc. The highest Tc that has been achieved to date is in the copper oxide system: 133 kelvin at ambient pressure and 164 kelvin at high pressures. As the nature of superconductivity in these materials is still not fully understood (they are not conventional superconductors), the prospects for achieving still higher transition temperatures by this route are not clear. In contrast, the Bardeen-Cooper-Schrieffer theory of conventional superconductivity gives a guide for achieving high Tc with no theoretical upper bound--all that is needed is a favourable combination of high-frequency phonons, strong electron-phonon coupling, and a high density of states. These conditions can in principle be fulfilled for metallic hydrogen and covalent compounds dominated by hydrogen, as hydrogen atoms provide the necessary high-frequency phonon modes as well as the strong electron-phonon coupling. Numerous calculations support this idea and have predicted transition temperatures in the range 50-235 kelvin for many hydrides, but only a moderate Tc of 17 kelvin has been observed experimentally. Here we investigate sulfur hydride, where a Tc of 80 kelvin has been predicted. We find that this system transforms to a metal at a pressure of approximately 90 gigapascals. On cooling, we see signatures of superconductivity: a sharp drop of the resistivity to zero and a decrease of the transition temperature with magnetic field, with magnetic susceptibility measurements confirming a Tc of 203 kelvin. Moreover, a pronounced isotope shift of Tc in sulfur deuteride is suggestive of an electron-phonon mechanism of superconductivity that is consistent with the Bardeen-Cooper-Schrieffer scenario. We argue that the phase responsible for high-Tc superconductivity in this system is likely to be H3S, formed from H2S by decomposition under pressure. These findings raise hope for the

  5. Successive heterolytic cleavages of H2 achieve N2 splitting on silica-supported tantalum hydrides: A DFT proposed mechanism

    KAUST Repository

    Soláns, Xavier Luis


    DFT(B3PW91) calculations have been carried out to propose a pathway for the N2 cleavage by H2 in the presence of silica-supported tantalum hydride complexes [(≡ SiO)2TaHx] that forms [(≡SiO)2Ta(NH)(NH2)] (Science2007, 317, 1056). The calculations, performed on the cluster models {μ-O[(HO)2SiO] 2}TaH1 and {μ-O[(HO)2SiO] 2}TaH3, labelled as (≡SiO)2TaH x (x = 1, 3), show that the direct hydride transfers to coordinated N-based ligands in (≡SiO)2TaH(η2-N2) and (≡SiO)2TaH(η2-HNNH) have high energy barrier barriers. These high energy barriers are due in part to a lack of energetically accessible empty orbitals in the negatively charged N-based ligands. It is shown that a succession of proton transfers and reduction steps (hydride transfer or 2 electron reduction by way of dihydride reductive coupling) to the nitrogen-based ligands leads to more energetically accessible pathways. These proton transfers, which occur by way of heterolytic activation of H2, increase the electrophilicity of the resulting ligand (diazenido, N 2H-, and hydrazido, NHNH2-, respectively) that can thus accept a hydride with a moderate energy barrier. In the case of (≡SiO)2TaH(η2-HNNH), the H 2 molecule that is adding across the Ta-N bond is released after the hydride transfer step by heterolytic elimination from (≡SiO) 2TaH(NH2)2, suggesting that dihydrogen has a key role in assisting the final steps of the reaction without itself being consumed in the process. This partly accounts for the experimental observation that the addition of H2 is needed to convert an intermediate, identified as a diazenido complex [(≡SiO)2TaH(η 2-HNNH)] from its ν(N-H) stretching frequency of 3400 cm -1, to the final product. Throughout the proposed mechanism, the tantalum remains in its preferred high oxidation state and avoids redox-type reactions, which are more energetically demanding. © 2012 American Chemical Society.


    Directory of Open Access Journals (Sweden)



    Full Text Available Pressure tubes made of Zr-2.5 wt% Nb alloy are important components consisting reactor coolant pressure boundary of a pressurized heavy water reactor, in which unanticipated through-wall cracks and rupture may occur due to a delayed hydride cracking (DHC. The Canadian Standards Association has provided deterministic and probabilistic structural integrity evaluation procedures to protect pressure tubes against DHC. However, intuitive understanding and subsequent assessment of flaw behaviors are still insufficient due to complex degradation mechanisms and diverse influential parameters of DHC compared with those of stress corrosion cracking and fatigue crack growth phenomena. In the present study, a deterministic flaw assessment program was developed and applied for systematic integrity assessment of the pressure tubes. Based on the examination results dealing with effects of flaw shapes, pressure tube dimensional changes, hydrogen concentrations of pressure tubes and plant operation scenarios, a simple and rough method for effective cooldown operation was proposed to minimize DHC risks. The developed deterministic assessment program for pressure tubes can be used to derive further technical bases for probabilistic damage frequency assessment.

  7. Dehydrogenation Properties of Magnesium Hydride Loaded with Fe, Fe-C, and Fe-Mg Additives. (United States)

    Pukazhselvan, D; Nasani, Narendar; Yang, Tao; Bdikin, Igor; Kovalevsky, Andrei V; Fagg, Duncan P


    This study highlights that Fe additives offer better catalytic properties than carbon, Fe-C (iron carbide/carbon composites), and Fe-Mg (Mg2 FeH6 ) additives for the low-temperature dehydrogenation of magnesium hydride. The in situ X-ray diffraction measurements prove the formation of a Mg2 FeH6 phase in iron additive loaded MgH2 . Nonetheless, differential scanning calorimetry data suggest that this Mg2 FeH6 phase does not have any influence on dehydrogenation properties of MgH2 . On the other hand, the composite system Mg2 FeH6 /MgH2 shows significantly improved dehydrogenation properties even in absence of further additives. It is suggested that the improved system performance of Fe loaded MgH2 is attributed to restrictions on crystal growth of MgH2 and the catalytic behavior of Fe nanoparticles, rather than any intrinsic catalytic properties offered by the formed mixed metal phase Mg2 FeH6 . © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Discovery of Novel Complex Metal Hydrides for Hydrogen Storage through Molecular Modeling and Combinatorial Methods

    Energy Technology Data Exchange (ETDEWEB)

    Lesch, David A; Adriaan Sachtler, J.W. J.; Low, John J; Jensen, Craig M; Ozolins, Vidvuds; Siegel, Don; Harmon, Laurel


    UOP LLC, a Honeywell Company, Ford Motor Company, and Striatus, Inc., collaborated with Professor Craig Jensen of the University of Hawaii and Professor Vidvuds Ozolins of University of California, Los Angeles on a multi-year cost-shared program to discover novel complex metal hydrides for hydrogen storage. This innovative program combined sophisticated molecular modeling with high throughput combinatorial experiments to maximize the probability of identifying commercially relevant, economical hydrogen storage materials with broad application. A set of tools was developed to pursue the medium throughput (MT) and high throughput (HT) combinatorial exploratory investigation of novel complex metal hydrides for hydrogen storage. The assay programs consisted of monitoring hydrogen evolution as a function of temperature. This project also incorporated theoretical methods to help select candidate materials families for testing. The Virtual High Throughput Screening served as a virtual laboratory, calculating structures and their properties. First Principles calculations were applied to various systems to examine hydrogen storage reaction pathways and the associated thermodynamics. The experimental program began with the validation of the MT assay tool with NaAlH4/0.02 mole Ti, the state of the art hydrogen storage system given by decomposition of sodium alanate to sodium hydride, aluminum metal, and hydrogen. Once certified, a combinatorial 21-point study of the NaAlH4 LiAlH4Mg(AlH4)2 phase diagram was investigated with the MT assay. Stability proved to be a problem as many of the materials decomposed during synthesis, altering the expected assay results. This resulted in repeating the entire experiment with a mild milling approach, which only temporarily increased capacity. NaAlH4 was the best performer in both studies and no new mixed alanates were observed, a result consistent with the VHTS. Powder XRD suggested that the reverse reaction, the regeneration of the

  9. Delayed hydride cracking behavior of Zr-2.5Nb alloy pressure tubes for PHWR700

    Energy Technology Data Exchange (ETDEWEB)

    Sunil, S.; Bind, A.K.; Khandelwal, H.K.; Singh, R.N., E-mail:; Chakravartty, J.K.


    In order to attain improved in-reactor performance few prototypes pressure tubes of Zr-2.5Nb alloy were manufactured by employing forging to break the cast structure and to obtain more homogeneous microstructure. Both double forging and single forging were employed. The forged material was further processed by employing hot extrusion, cold pilgering and autoclaving. A detailed characterization in terms of mechanical properties and microstructure of the prototype tubes were carried for qualifying it for intended use as pressure tubes in PHWR700 reactors. In this work, Delayed Hydride Cracking (DHC) behavior of the forged Zr-2.5Nb pressure tube material characterized in terms of DHC velocity and threshold stress intensity factor associated with DHC (K{sub IH}) was compared with that of conventionally manufactured material in the temperature range of 200–283 °C. Activation energy associated with the DHC in this alloy was found to be ∼60 kJ/mol for the forged materials.

  10. Dynamic behaviour of tantalum hydride supported on silica or MCM-41 in the metathesis of alkanes

    KAUST Repository

    Soignier, Sophie


    The metathesis of ethane and propane catalysed by tantalum hydride supported on silica or MCM-41 was studied under static and dynamic conditions. During the reaction, the rate decreased over time, indicating deactivation of the catalyst. The evolution of the catalytic system and surface species over time was monitored by various physico-chemical methods: FTIR, 13C NMR spectroscopy, elemental analysis and chemical reactivity. A carbonaceous deposit composed of unsaturated hydrocarbyl species was observed by 13C NMR. This deposit was responsible for poisoning of the catalyst. The deactivation of the catalyst proved more severe at higher temperatures and under static rather than dynamic conditions. A partial regeneration of the catalyst could be achieved during a series of repeated runs. Mechanistically, the deconvolution of the products\\' distribution over time indicated the occurrence of hydrogenolysis in the early stages of the reaction, while pure metathesis dominated later on. The hydrogen was supplied by the dehydrogenation of hydrocarbyl surface species involved in the deactivation process. © 2014 The Royal Society of Chemistry.

  11. Composition and cycle life of multicomponent AB{sub 5} hydride electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Adzic, G.D.; Johnson, J.R.; Reilly, J.J.; McBreen, J.; Mukerjee, S. [Brookhaven National Lab., Upton, NY (United States); Kumar, M.P.S.; Zhang, W.; Srinivasan, S. [Texas A and M Univ., College Station, TX (United States). Center for Electrochemical Systems and Hydrogen Research


    Multicomponent AB{sub 5} hydrides are attractive replacements for the cadmium electrode in nickel -- cadmium batteries. The archetype compound of the AB{sub 5} alloy class is LaNi{sub 5}, but in a typical battery electrode mischmetal is substituted for La and Ni is substituted in part by variety of metals. While the effects of Ni substitution have been widely studied, relatively little effort has focused on the effect of La substitution. This paper deals with the effect on cycle life due to the increasing presence of Ce in the alloy series La{sub 1-x}Ce{sub x}Ni{sub 3.55}Co{sub .75}Mn{sub .4}Al{sub .3}. Alloys were characterized by the determination of pressure-composition relationships, molar volume of H and electrode cycle life. The effects due to lattice expansion are taken into account. It was concluded that the rate of loss of electrochemical capacity per charge/discharge cycle was significantly decreased due to the presence of Ce.

  12. Alkali Metal Cation Affinities of Anionic Main Group-Element Hydrides Across the Periodic Table. (United States)

    Boughlala, Zakaria; Fonseca Guerra, Célia; Bickelhaupt, F Matthias


    We have carried out an extensive exploration of gas-phase alkali metal cation affinities (AMCA) of archetypal anionic bases across the periodic system using relativistic density functional theory at ZORA-BP86/QZ4P//ZORA-BP86/TZ2P. AMCA values of all bases were computed for the lithium, sodium, potassium, rubidium and cesium cations and compared with the corresponding proton affinities (PA). One purpose of this work is to provide an intrinsically consistent set of values of the 298 K AMCAs of all anionic (XHn-1(-) ) constituted by main group-element hydrides of groups 14-17 along the periods 2-6. In particular, we wish to establish the trend in affinity for a cation as the latter varies from proton to, and along, the alkali cations. Our main purpose is to understand these trends in terms of the underlying bonding mechanism using Kohn-Sham molecular orbital theory together with a quantitative bond energy decomposition analyses (EDA). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Graphitic nanofibres as catalyst for improving the dehydrogenation behavior of complex aluminium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, M. Sterlin Leo; Raghubanshi, Himanshu; Pukazhselvan, D.; Srivastava, O.N. [Banaras Hindu Univ., Varnasi (India). Hydrogen Energy Center


    In the present work, we explored the catalytic effect of graphitic nanofibres (GNF) particularly of two different morphology, namely planar graphitic nanofibre (PGNF) and helical graphitic nanofibre (HGNF) for enhancement of hydrogen desorption from complex aluminium hydrides such as LiAlH{sub 4} and LiMg(AlH{sub 4}){sub 3}. We found that the catalytic activity of fibres depends mainly on its morphology. Hence helical morphology fibres possess superior catalytic activity than planar graphitic nanofibres. The desorption temperature for 8 mol% HGNF admixed LiAlH{sub 4} gets lowered from 159 C to 128 C with significantly faster kinetics. In 8 mol% HGNF admixed LiMg(AlH{sub 4}){sub 3} sample, the desorption temperature gets lowered from 105 C to {proportional_to}70 C. The activation energy calculated for the first step decomposition of LiAlH{sub 4} admixed with 8 mol% HGNF is {proportional_to}68 kJmol{sup -1}, whereas that for pristine LiAlH{sub 4} it is 107 kJ/mol. The activation energy calculated for as synthesized LiMg(AlH{sub 4}){sub 3} is {proportional_to}66 kJ/mol. Since the first step decomposition of LiMg(AlH{sub 4}){sub 3} occurs during GNF admixing, the activation energy for initial step decomposition of GNF admixed LiMg(AlH{sub 4}){sub 3} could not be estimated. (orig.)

  14. Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants (United States)

    Shark, Steven C.

    The purpose of this study is to investigate the use of reactive energetic fuel additives that have the potential to increase the combustion performance of hybrid rocket propellants in terms of solid fuel regression rate and combustion efficiency. Additives that can augment the combustion flame zone in a hybrid rocket motor by means of increased energy feedback to the fuel grain surface are of great interest. Metal hydrides have large volumetric hydrogen densities, which gives these materials high performance potential as fuel additives in terms of specifc impulse. The excess hydrogen and corresponding base metal may also cause an increase in the hybrid rocket solid fuel regression rate. Pyrophoric additives also have potential to increase the solid fuel regression rate by reacting more readily near the burning fuel surface providing rapid energy feedback. An experimental performance evaluation of metal hydride fuel additives for hybrid rocket motor propulsion systems is examined in this study. Hypergolic ignition droplet tests and an accelerated aging study revealed the protection capabilities of Dicyclopentadiene (DCPD) as a fuel binder, and the ability for unaided ignition. Static hybrid rocket motor experiments were conducted using DCPD as the fuel. Sodium borohydride (NabH4) and aluminum hydride (AlH3) were examined as fuel additives. Ninety percent rocket grade hydrogen peroxide (RGHP) was used as the oxidizer. In this study, the sensitivity of solid fuel regression rate and characteristic velocity (C*) efficiency to total fuel grain port mass flux and particle loading is examined. These results were compared to HTPB combustion performance as a baseline. Chamber pressure histories revealed steady motor operation in most tests, with reduced ignition delays when using NabH4 as a fuel additive. The addition of NabH4 and AlH3 produced up to a 47% and 85% increase in regression rate over neat DCPD, respectively. For all test conditions examined C* efficiency ranges

  15. AlN thin film grown on different substrates by hydride vapor phase epitaxy (United States)

    Sun, M. S.; Zhang, J. C.; Huang, J.; Wang, J. F.; Xu, K.


    AlN thin films have been grown on GaN/sapphire templates, 6 H-SiC and sapphire by hydride vapor phase epitaxy. The influence of growth conditions and substrates on the crystal qualities and growth mode has been investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM). The results showed that the low pressure was favorable for high-quality AlN thin film growth around 1000 °C. The full-width at half-maximum (FWHM) of (0002) XRD of 200-nm AlN thin film grown on GaN/sapphire, 6 H-SiC and sapphire are 220, 187 and 260 arc s, respectively. While the corresponding counterparts of (10-12) are 1300, 662 and 2650 arc s, respectively. Both suggested that low dislocation density in AlN grown on 6 H-SiC. The morphology of AlN thin film on sapphire showed islands without coalescence initially, and then changed to be coalescent with atomic steps at 1200 nm. However, those for samples on 6 H-SiC and GaN/sapphire showed smooth surface with clear atomic steps at thickness of 200 nm. The result indicated different growth modes of AlN on different substrates. It was believed that the different lattice mismatchs between AlN and substrates led to the different crystal qualities and growth modes.

  16. A Kinetic Model for GaAs Growth by Hydride Vapor Phase Epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Schulte, Kevin L.; Simon, John; Jain, Nikhil; Young, David L.; Ptak, Aaron J.


    Precise control of the growth of III-V materials by hydride vapor phase epitaxy (HVPE) is complicated by the fact that the growth rate depends on the concentrations of nearly all inputs to the reactor and also the reaction temperature. This behavior is in contrast to metalorganic vapor phase epitaxy (MOVPE), which in common practice operates in a mass transport limited regime where growth rate and alloy composition are controlled almost exclusively by flow of the Group III precursor. In HVPE, the growth rate and alloy compositions are very sensitive to temperature and reactant concentrations, which are strong functions of the reactor geometry. HVPE growth, particularly the growth of large area materials and devices, will benefit from the development of a growth model that can eventually be coupled with a computational fluid dynamics (CFD) model of a specific reactor geometry. In this work, we develop a growth rate law using a Langmuir-Hinshelwood (L-H) analysis, fitting unknown parameters to growth rate data from the literature that captures the relevant kinetic and thermodynamic phenomena of the HVPE process. We compare the L-H rate law to growth rate data from our custom HVPE reactor, and develop quantitative insight into reactor performance, demonstrating the utility of the growth model.

  17. Recent advances in improving performances of the lightweight complex hydrides Li-Mg-N-H system

    Directory of Open Access Journals (Sweden)

    Bao Zhang


    Full Text Available A brief review of state-of-the art advances in improving performances of the lightweight complex hydrides Li-Mg-N-H system is reported. Among the hydrogen storage materials, Li-Mg-N-H combination systems are regarded as one of the most potential candidates for the vehicular applications owing to their high hydrogen storage capacity (>5 wt% H and a more appropriate thermodynamic properties of hydrogen absorption and desorption. In the Li-Mg-N-H systems, tremendous efforts have been devoted to improving the hydrogen storage properties by adjusting composition, revealing reaction mechanisms, adding catalysts and refining the microstructures, etc. During the studies, different mechanisms, such as the coordinated two-molecule or multimolecule reaction mechanism and the ammonia-mediated mechanism, are proposed and applied under some certain conditions. Catalysis and nanosizing are very effective in enhancing the kinetic properties and thermodynamic destabilization of Li-Mg-N-H systems. Due to nano effects, the space-confinement and nanoconfinement seems to be more effective for improving the hydrogen storage performance, and it is great significant to develop hydrogen storage materials by studying the nanoconfined effects on the Li-Mg-N-H systems.

  18. Electron Backscatter Diffraction Studies on the Formation of Superlattice Metal Hydride Alloys

    Directory of Open Access Journals (Sweden)

    Shuli Yan


    Full Text Available Microstructures of a series of La-Mg-Ni-based superlattice metal hydride alloys produced by a novel method of interaction of a LaNi5 alloy and Mg vapor were studied using a combination of X-ray energy dispersive spectroscopy and electron backscatter diffraction. The conversion rate of LaNi5 increased from 86.8% into 98.2%, and the A2B7 phase abundance increased from 42.5 to 45.8 wt % and reduced to 39.2 wt % with the increase in process time from four to 32 h. During the first stage of reaction, Mg formed discrete grains with the same orientation, which was closely related to the orientation of the host LaNi5 alloy. Mg then diffused through the ab-phase of LaNi5 and formed the AB2, AB3, and A2B7 phases. Diffusion of Mg stalled at the grain boundary of the host LaNi5 alloy. Good alignments in the c-axis between the newly formed superlattice phases and LaNi5 were observed. The density of high-angle grain boundary decreased with the increase in process time and was an indication of lattice cracking.

  19. Effect of Nano-Magnesium Hydride on the Thermal Decomposition Behaviors of RDX

    Directory of Open Access Journals (Sweden)

    Miao Yao


    Full Text Available In order to improve the detonation performance of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX explosive, addictives with high heat values were used, and magnesium hydride (MgH2 is one of the candidates. However, it is important to see whether MgH2 is a safe addictive. In this paper, the thermal and kinetic properties of RDX and mixture of RDX/MgH2 were investigated by differential scanning calorimeter (DSC and accelerating rate calorimeter (ARC, respectively. The apparent activation energy (E and frequency factor (A of thermal explosion were calculated based on the data of DSC experiments using the Kissinger and Ozawa approaches. The results show that the addition of MgH2 decreases both E and A of RDX, which means that the mixture of RDX/MgH2 has a lower thermal stability than RDX, and the calculation results obtained from the ARC experiments data support this too. Besides, the most probable mechanism functions about the decomposition of RDX and RDX/MgH2 were given in this paper which confirmed the change of the decomposition mechanism.

  20. The Importance of Rare-Earth Additions in Zr-Based AB2 Metal Hydride Alloys

    Directory of Open Access Journals (Sweden)

    Kwo-Hsiung Young


    Full Text Available Effects of substitutions of rare earth (RE elements (Y, La, Ce, and Nd to the Zr-based AB2 multi-phase metal hydride (MH alloys on the structure, gaseous phase hydrogen storage (H-storage, and electrochemical properties were studied and compared. Solubilities of the RE atoms in the main Laves phases (C14 and C15 are very low, and therefore the main contributions of the RE additives are through the formation of the RENi phase and change in TiNi phase abundance. Both the RENi and TiNi phases are found to facilitate the bulk diffusion of hydrogen but impede the surface reaction. The former is very effective in improving the activation behaviors. −40 °C performances of the Ce-doped alloys are slightly better than the Nd-doped alloys but not as good as those of the La-doped alloys, which gained the improvement through a different mechanism. While the improvement in ultra-low-temperature performance of the Ce-containing alloys can be associated with a larger amount of metallic Ni-clusters embedded in the surface oxide, the improvement in the La-containing alloys originates from the clean alloy/oxide interface as shown in an earlier transmission electron microscopy study. Overall, the substitution of 1 at% Ce to partially replace Zr gives the best electrochemical performances (capacity, rate, and activation and is recommended for all the AB2 MH alloys for electrochemical applications.

  1. Atomic-Scale Chemical, Physical and Electronic Properties of the Subsurface Hydride of Palladium

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, Paul


    We employed low-temperature, extreme-high vacuum scanning tunneling microscopy (STM) to investigate the roles of subsurface hydride (H) and deuteride (D) in the surface reconstruction and surface reactivity of Pd{110}. Specifically, we gained the ability to tailor the surface structure of Pd{110} both by preparation method and by deposition of deuterium from the gas phase. We observed thiophene at low coverage on Pd{110} to determine its adsorption orientation and electronic structure through scanning tunneling spectroscopy (STS) – namely, conductance spectroscopy and differential conductance imaging. We developed the methods necessary to coadsorb D adatoms with thiophene molecules, and to induce the reaction of individual molecules with predefined subsurface H or D features. In the case of Pd{110}, we found a much more pronounced effect from subsurface D, as it is influenced by the surface directionality. These experiments facilitate an understanding of the role of surface and subsurface H and D in heterogeneous catalytic processes, specifically in the hydrodesulfuization (HDS) of thiophene, an important and ubiquitous component found to be detrimental to petroleum refining.

  2. Compatibility of potential containment materials with molten lithium hydride at 800°C (United States)

    Pawel, S. J.


    A series of compatibility experiments has been performed for several stainless steels, carbon steels, and a nickel-base alloy in molten lithium hydride at 800°C for comparison with previous experiments on type 304L stainless steel. The results indicate that the mechanism of corrosion is the same for each of 304L, 304, 316L, and 309 stainless steel and that very similar corrosion in molten LiH is expected for each stainless alloy. Deviation from parabolic kinetics at extended exposure time for each stainless alloy is attributed in part to weight gains associated with lithium penetration. Stabilized (Nb and Ti) low carbon (steels are observed to be essentially inert in LiH at 800°C with stable carbides and no grain growth. Mild steel (type 1020) is decarburized rapidly and exhibits extensive grain growth in LiH at 800°C. Both steels exhibit weight gains during exposure to molten LiH that are also related in part to lithium penetration. Alloy X (UNS N06002) exhibits extreme corrosion with essentially linear kinetics and dissolution of nickel sufficient to form subsurface voids.

  3. Evaluation of U-Zr hydride fuel for a thorium fuel cycle in an RTR concept

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyung Taek; Cho, Nam Zin [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)


    In this paper, we performed a design study of a thorium fueled reactor according to the design concept of the Radkowsky Thorium Reactor (RTR) and evaluated its overall performance. To enhance its performance and alleviate its problems, we introduced a new metallic uranium fuel, uranium-zirconium hydride (U-ZrH{sub 1.6}), as a seed fuel. For comparison, typical ABB/CE-type PWR based on SYSTEM 80+and standard RTR-type thorium reactor were also studied. From the results of performance analysis, we could ascertain advantages of RTR-type thorium fueled reactor in proliferation resistance, fuel cycle economics, and back-end fuel cycle. Also, we found that enhancement of proliferation resistance and safer operating conditions may be achieved by using the U-ZrH{sub 1.6} fuel in the seed region without additional penalties in comparison with the standard RTR`s U-Zr fuel. 6 refs., 2 figs., 6 tabs. (Author)

  4. Metal Hydride Nanoparticles with Ultrahigh Structural Stability and Hydrogen Storage Activity Derived from Microencapsulated Nanoconfinement. (United States)

    Zhang, Jiguang; Zhu, Yunfeng; Lin, Huaijun; Liu, Yana; Zhang, Yao; Li, Shenyang; Ma, Zhongliang; Li, Liquan


    Metal hydrides (MHs) have recently been designed for hydrogen sensors, switchable mirrors, rechargeable batteries, and other energy-storage and conversion-related applications. The demands of MHs, particular fast hydrogen absorption/desorption kinetics, have brought their sizes to nanoscale. However, the nanostructured MHs generally suffer from surface passivation and low aggregation-resisting structural stability upon absorption/desorption. This study reports a novel strategy named microencapsulated nanoconfinement to realize local synthesis of nano-MHs, which possess ultrahigh structural stability and superior desorption kinetics. Monodispersed Mg2 NiH4 single crystal nanoparticles (NPs) are in situ encapsulated on the surface of graphene sheets (GS) through facile gas-solid reactions. This well-defined MgO coating layer with a thickness of ≈3 nm efficiently separates the NPs from each other to prevent aggregation during hydrogen absorption/desorption cycles, leading to excellent thermal and mechanical stability. More interestingly, the MgO layer shows superior gas-selective permeability to prevent further oxidation of Mg2 NiH4 meanwhile accessible for hydrogen absorption/desorption. As a result, an extremely low activation energy (31.2 kJ mol(-1) ) for the dehydrogenation reaction is achieved. This study provides alternative insights into designing nanosized MHs with both excellent hydrogen storage activity and thermal/mechanical stability exempting surface modification by agents. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Studies on MgNi-Based Metal Hydride Electrode with Aqueous Electrolytes Composed of Various Hydroxides

    Directory of Open Access Journals (Sweden)

    Jean Nei


    Full Text Available Compositions of MgNi-based amorphous-monocrystalline thin films produced by radio frequency (RF sputtering with a varying composition target have been optimized. The composition Mg52Ni39Co3Mn6 is identified to possess the highest initial discharge capacity of 640 mAh·g−1 with a 50 mA·g−1 discharge current density. Reproduction in bulk form of Mg52Ni39Co3Mn6 alloy composition was prepared through a combination of melt spinning (MS and mechanical alloying (MA, shows a sponge-like microstructure with >95% amorphous content, and is chosen as the metal hydride (MH alloy for a sequence of electrolyte experiments with various hydroxides including LiOH, NaOH, KOH, RbOH, CsOH, and (C2H54N(OH. The electrolyte conductivity is found to be closely related to cation size in the hydroxide compound used as 1 M additive to the 4 M KOH aqueous solution. The degradation performance of Mg52Ni39Co3Mn6 alloy through cycling demonstrates a strong correlation with the redox potential of the cation in the alkali hydroxide compound used as 1 M additive to the 5 M KOH aqueous solution. NaOH, CsOH, and (C2H54N(OH additions are found to achieve a good balance between corrosion and conductivity performances.

  6. Raman scattering by phonons and crystal-field excitations in cerium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Avisar, David [Nuclear Research Center, Negev, P.O. Box 9001, Beer- Sheva, 84190 Israel (Israel); Livneh, Tsachi, E-mail: [Nuclear Research Center, Negev, P.O. Box 9001, Beer- Sheva, 84190 Israel (Israel)


    The effect of cerium hydrides (deutrides) stoichiometry, CeH(D){sub 2+x} (x = 0-0.90), on the vibrational and Ce{sup +3} crystal-field excitations was studied at room temperature by means of Raman scattering spectroscopy. The assignment of CeH{sub 2+x} vibrational Raman bands, with x < 0.6, are facilitated by the remarkable similarity of their frequencies to the previously measured inelastic neutron scattering (INS) frequencies for the corresponding LaH{sub 2+x}. Above x{approx}0.60 the INS and Raman spectra become increasingly different presumably due to the repulsive H-H interactions, which are also known to increase the magnitude of dispersion in optic-mode vibrations. The intensity of a band at {approx}810 cm{sup -1} relative to that of a band at {approx}710 cm{sup -1} decreases by an order of magnitude from x{approx}0.60 to x{approx}0.72 and remain practically constant up to x = 0.90. Since at room temperature the composition dependent structural tetragonal-cubic and electronic metal-semiconductor transitions occur at x{approx}0.60 and 0.7 < x < 0.8, respectively, the above spectral changes cannot be clearly assigned to either.

  7. Accumulating the hydride state in the catalytic cycle of [FeFe]-hydrogenases (United States)

    Winkler, Martin; Senger, Moritz; Duan, Jifu; Esselborn, Julian; Wittkamp, Florian; Hofmann, Eckhard; Apfel, Ulf-Peter; Stripp, Sven Timo; Happe, Thomas


    H2 turnover at the [FeFe]-hydrogenase cofactor (H-cluster) is assumed to follow a reversible heterolytic mechanism, first yielding a proton and a hydrido-species which again is double-oxidized to release another proton. Three of the four presumed catalytic intermediates (Hox, Hred/Hred and Hsred) were characterized, using various spectroscopic techniques. However, in catalytically active enzyme, the state containing the hydrido-species, which is eponymous for the proposed heterolytic mechanism, has yet only been speculated about. We use different strategies to trap and spectroscopically characterize this transient hydride state (Hhyd) for three wild-type [FeFe]-hydrogenases. Applying a novel set-up for real-time attenuated total-reflection Fourier-transform infrared spectroscopy, we monitor compositional changes in the state-specific infrared signatures of [FeFe]-hydrogenases, varying buffer pH and gas composition. We selectively enrich the equilibrium concentration of Hhyd, applying Le Chatelier's principle by simultaneously increasing substrate and product concentrations (H2/H+). Site-directed manipulation, targeting either the proton-transfer pathway or the adt ligand, significantly enhances Hhyd accumulation independent of pH.

  8. Synthesis and properties of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride

    Energy Technology Data Exchange (ETDEWEB)

    Verbovytskyy, Yu. [Physico-Mechanical Institute, NAS of Ukraine, 5 Naukova str., 79601 Lviv (Ukraine); Zhang, J.; Cuevas, F.; Paul-Boncour, V. [Institut de Chimie et des Materiaux de Paris Est, CMTR, UMR 7182, CNRS-UPEC, 2-8 rue H. Dunant, 94320 Thiais (France); Zavaliy, I., E-mail: [Physico-Mechanical Institute, NAS of Ukraine, 5 Naukova str., 79601 Lviv (Ukraine)


    Graphical abstract: Crystal structure of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride. - Highlights: • Preparation of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride by reactive ball milling. • Crystal structure determination by X-ray powder diffraction. • Electrochemical studies of the ball milled MH/Ni electrodes. - Abstract: The Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride with a grain size of 16 nm was prepared by reactive ball milling. Its crystal structure was studied by X-ray powder diffraction. A tetragonal Mg{sub 2}CoH{sub 5} structure type was suggested for the obtained hydride. The decomposition temperature of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} phase was observed at 213 °C. Electrochemical measurements as negative electrode of Ni–MH battery were also performed. Significant improvements can be made by ball-milling the hydride with nickel powder.

  9. Hydride precipitation, fracture and plasticity mechanisms in pure zirconium and Zircaloy-4 at temperatures typical for the postulated loss-of-coolant accident

    Energy Technology Data Exchange (ETDEWEB)

    Pshenichnikov, Anton, E-mail:; Stuckert, Juri; Walter, Mario


    Highlights: • All δ-hydrides in Zr and Zircaloy-4 have basal or pyramidal types of habit planes. • Seven orientation relationships for δ-hydrides in Zr matrix were detected. • Decohesion fracture mechanism of hydrogenated Zr was investigated by fractography. - Abstract: The results of investigations of samples of zirconium and its alloy Zircaloy-4, hydrogenated at temperatures 900–1200 K (typical temperatures for loss-of-coolant accidents) are presented. The analyses, based on a range of complementary techniques (X-ray diffraction, scanning electron microscopy, electron backscatter diffraction) reveals the direct interrelation of internal structure transformation and hydride distribution with the degradation of mechanical properties. Formation of small-scale zirconium hydrides and their bulk distribution in zirconium and Zircaloy-4 were investigated. Fractographical analysis was performed on the ruptured samples tested in a tensile machine at room temperature. The already-known hydrogen embrittlement mechanisms based on hydride formation and hydrogen-enhanced decohesion and the applicability of them in the case of zirconium and its alloys is discussed.

  10. Study of the mechanical behavior of the hydride blister/rim structure in Zircaloy-4 using in-situ synchrotron X-ray diffraction (United States)

    Lin, Jun-li; Han, Xiaochun; Heuser, Brent J.; Almer, Jonathan D.


    High-energy synchrotron X-ray diffraction was utilized to study the mechanical response of the f.c.c δ hydride phase, the intermetallic precipitation with hexagonal C14 lave phase and the α-Zr phase in the Zircaloy-4 materials with a hydride rim/blister structure near one surface of the material during in-situ uniaxial tension experiment at 200 °C. The f.c.c δ was the only hydride phase observed in the rim/blister structure. The conventional Rietveld refinement was applied to measure the macro-strain equivalent response of the three phases. Two regions were delineated in the applied load versus lattice strain measurement: a linear elastic strain region and region that exhibited load partitioning. Load partitioning was quantified by von Mises analysis. The three phases were observed to have similar elastic modulus at 200 °C.

  11. InGaAsP Solar Cells Grown by Hydride Vapor Phase Epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Nikhil; Simon, John; Schulte, Kevin L.; Dippo, Patricia; Young, Michelle; Young, David L.; Ptak, Aaron J.


    Hydride vapor phase epitaxy (HVPE) has recently reemerged as a low-cost, high-throughput alternative to metalorganic chemical vapor deposition (MOCVD) for the growth of high-efficiency III-V solar cells. Quaternary InGaAsP solar cells in the bandgap range of ~1.7-1.8 eV are promising top-cell candidates for integration in Ill-V/Si tandem cells with projected one-sun efficiencies exceeding 30%. In this work, we report on the development of lattice-matched InGaAsP solar cells grown on GaAs substrates via HVPE at very high growth rates of ~0.7 um/min. We demonstrate prototype 1.7 eV InGaAsP solar cells with an open-circuit voltage of 1.11 V. The short-circuit current is limited by the lack of a window layer in these early stage devices. The photo response of 1.7 InGaAsP solar cell with ~1.1 um thick base layer is found to be nearly insensitive to variation in p-type base doping concentration in the range from Na - 4x1016 to - 1x1017 cm-3, indicating an effective carrier collection length on the order of - 1.1 um or higher in our devices. These initial InGaAsP cell results are encouraging and highlight the viability of HVPE to produce mixed arsenide-phosphide solar cells grown lattice-matched on GaAs.

  12. Oxygen segregation in pre-hydrided Zircaloy-4 cladding during a simulated LOCA transient

    Directory of Open Access Journals (Sweden)

    Torres Elodie


    Full Text Available Oxygen and hydrogen distributions are key elements influencing the residual ductility of zirconium-based nuclear fuel cladding during the quench phase following a Loss Of Coolant Accident (LOCA. During the high temperature oxidation, a complex partitioning of the alloying elements is observed. A finite-difference code for solving the oxygen diffusion equations has been developed by Institut de Radioprotection et de Sûreté Nucléaire to predict the oxygen profile within the samples. The comparison between the calculations and the experimental results in the mixed α+β region shows that the oxygen diffusion is not accurately predicted by the existing modeling. This work aims at determining the key parameters controlling the average oxygen profile within the sample in the two-phase regions at 1200 °C. High temperature steam oxidation tests interrupted by water quench were performed using pre-hydrided Zircaloy-4 samples. Experimental oxygen distribution was measured by Electron Probe Micro-Analysis (EPMA. The phase distributions within the cladding thickness, was measured using image analysis to determine the radial profile of α(O phase fraction. It is further demonstrated and experimentally checked that the α-phase fraction in these regions follows a diffusion-like radial profile. A new phase fraction modeling is then proposed in the cladding metallic part during steam oxidation. The modeling results are compared to a large set of experiments including the influence of exposure duration and hydrogen content. Another key outcome from this modeling is that oxygen average profile is straightforward derived from the proposed modeling.

  13. Polycrystalline indium phosphide on silicon by indium assisted growth in hydride vapor phase epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Metaferia, Wondwosen; Sun, Yan-Ting, E-mail:; Lourdudoss, Sebastian [Laboratory of Semiconductor Materials, Department of Materials and Nano Physics, KTH—Royal Institute of Technology, Electrum 229, 164 40 Kista (Sweden); Pietralunga, Silvia M. [CNR-Institute for Photonics and Nanotechnologies, P. Leonardo da Vinci, 32 20133 Milano (Italy); Zani, Maurizio; Tagliaferri, Alberto [Department of Physics Politecnico di Milano, P. Leonardo da Vinci, 32 20133 Milano (Italy)


    Polycrystalline InP was grown on Si(001) and Si(111) substrates by using indium (In) metal as a starting material in hydride vapor phase epitaxy (HVPE) reactor. In metal was deposited on silicon substrates by thermal evaporation technique. The deposited In resulted in islands of different size and was found to be polycrystalline in nature. Different growth experiments of growing InP were performed, and the growth mechanism was investigated. Atomic force microscopy and scanning electron microscopy for morphological investigation, Scanning Auger microscopy for surface and compositional analyses, powder X-ray diffraction for crystallinity, and micro photoluminescence for optical quality assessment were conducted. It is shown that the growth starts first by phosphidisation of the In islands to InP followed by subsequent selective deposition of InP in HVPE regardless of the Si substrate orientation. Polycrystalline InP of large grain size is achieved and the growth rate as high as 21 μm/h is obtained on both substrates. Sulfur doping of the polycrystalline InP was investigated by growing alternating layers of sulfur doped and unintentionally doped InP for equal interval of time. These layers could be delineated by stain etching showing that enough amount of sulfur can be incorporated. Grains of large lateral dimension up to 3 μm polycrystalline InP on Si with good morphological and optical quality is obtained. The process is generic and it can also be applied for the growth of other polycrystalline III–V semiconductor layers on low cost and flexible substrates for solar cell applications.

  14. Thermodynamics of various F420 coenzyme models as sources of electrons, hydride ions, hydrogen atoms and protons in acetonitrile. (United States)

    Xia, Ke; Shen, Guang-Bin; Zhu, Xiao-Qing


    32 F420 coenzyme models with alkylation of the three different N atoms (N1, N3 and N10) in the core structure (XFH(-)) were designed and synthesized and the thermodynamic driving forces (defined in terms of the molar enthalpy changes or the standard redox potentials in this work) of the 32 XFH(-) releasing hydride ions, hydrogen atoms and electrons, the thermodynamic driving forces of the 32 XFH˙ releasing protons and hydrogen atoms and the thermodynamic driving forces of XF(-)˙ releasing electrons in acetonitrile were determined using titration calorimetry and electrochemical methods. The effects of the methyl group at N1, N3 and N10 and a negative charge on N1 and N10 atoms on the six thermodynamic driving forces of the F420 coenzyme models and their related reaction intermediates were examined; the results show that seating arrangements of the methyl group and the negative charge have remarkably different effects on the thermodynamic properties of the F420 coenzyme models and their related reaction intermediates. The effects of the substituents at C7 and C8 on the six thermodynamic driving forces of the F420 coenzyme models and their related reaction intermediates were also examined; the results show that the substituents at C7 and C8 have good Hammett linear free energy relationships with the six thermodynamic parameters. Meanwhile, a reasonable determination of possible reactions between members of the F420 family and NADH family in vivo was given according to a thermodynamic analysis platform constructed using the elementary step thermodynamic parameter of F420 coenzyme model 2FH(-) and NADH model MNAH releasing hydride ions in acetonitrile. The information disclosed in this work can not only fill a gap in the chemical thermodynamics of F420 coenzyme models as a class of very important organic sources of electrons, hydride ions, hydrogen atoms and protons, but also strongly promote the fast development of the chemistry and applications of F420 coenzyme.

  15. Gas-Phase Ion-Molecule Reactions of Copper Hydride Anions [CuH2](-) and [Cu2H3](). (United States)

    Zavras, Athanasios; Ghari, Hossein; Ariafard, Alireza; Canty, Allan J; O'Hair, Richard A J


    Gas-phase reactivity of the copper hydride anions [CuH2](-) and [Cu2H3](-) toward a range of neutral reagents has been examined via multistage mass spectrometry experiments in a linear ion trap mass spectrometer in conjunction with isotope labeling studies and Density Functional Theory (DFT) calculations. [CuH2](-) is more reactive than [Cu2H3](-), consistent with DFT calculations, which show it has a higher energy HOMO. Experimentally, [CuH2](-) was found to react with CS2 via hydride transfer to give thioformate (HCS2(-)) in competition with the formation of the organometallic [CuCS2](-) ion via liberation of hydrogen; CO2 via insertion to produce [HCuO2CH](-); methyl iodide and allyl iodide to give I(-) and [CuHI](-); and 2,2,2-trifluoroethanol and 1-butanethiol via protonation to give hydrogen and the product anions [CuH(OCH2CF3)](-) and [CuH(SBu)](-). In contrast, the weaker acid methanol was found to be unreactive. DFT calculations reveal that the differences in reactivity between CS2 and CO2 are due to the lower lying π* orbital of the former, which allows it to accept electron density from the Cu center to form the initial three-membered ring complex intermediate, [H2Cu(η(2)-CS2)](-). In contrast, CO2 undergoes the barrierless side-on hydride transfer promoted by the high electronegativity of the oxygen atoms. Side-on SN2 mechanisms for reactions of [CuH2](-) with methyl iodide and allyl iodide are favored on the basis of DFT calculations. Finally, the DFT calculated barriers for protonation of [CuH2](-) by methanol, 2,2,2-trifluoroethanol, and 1-butanethiol correlate with their gas-phase acidities, suggesting that reactivity is mainly controlled by the acidity of the substrate.

  16. CO2 activation through silylimido and silylamido zirconium hydrides supported on N-donor chelating SBA15 surface ligand

    KAUST Repository

    Pasha, Fahran Ahmad


    Density functional theory calculations and 2D 1H-13C HETCOR solid state NMR spectroscopy prove that CO2 can probe, by its own reactivity, different types of N-donor surface ligands on SBA15-supported ZrIV hydrides: [(≡Si-O-)(≡Si-N=)[Zr]H] and [(≡Si-NH-)(≡Si-X-)[Zr]H2] (X = O or NH). Moreover, [(≡Si-O-)(≡Si-N=)[Zr]H] activates CO2 more efficiently than the other complexes and leads to a carbimato Zr formate.

  17. Clean Grain Boundary Found in C14/Body-Center-Cubic Multi-Phase Metal Hydride Alloys

    Directory of Open Access Journals (Sweden)

    Hao-Ting Shen


    Full Text Available The grain boundaries of three Laves phase-related body-center-cubic (bcc solid-solution, metal hydride (MH alloys with different phase abundances were closely examined by scanning electron microscopy (SEM, transmission electron microscopy (TEM, and more importantly, electron backscatter diffraction (EBSD techniques. By using EBSD, we were able to identify the alignment of the crystallographic orientations of the three major phases in the alloys (C14, bcc, and B2 structures. This finding confirms the presence of crystallographically sharp interfaces between neighboring phases, which is a basic assumption for synergetic effects in a multi-phase MH system.

  18. Current status of environmental, health, and safety issues of nickel metal-hydride batteries for electric vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Corbus, D; Hammel, C J; Mark, J


    This report identifies important environment, health, and safety issues associated with nickel metal-hydride (Ni-MH) batteries and assesses the need for further testing and analysis. Among the issues discussed are cell and battery safety, workplace health and safety, shipping requirements, and in-vehicle safety. The manufacture and recycling of Ni-MH batteries are also examined. This report also overviews the ``FH&S`` issues associated with other nickel-based electric vehicle batteries; it examines venting characteristics, toxicity of battery materials, and the status of spent batteries as a hazardous waste.

  19. Growth of low-threading-dislocation-density GaN on graphene by hydride vapor phase epitaxy (United States)

    He, Shunyu; Xu, Yu; Qi, Lin; Li, Zongyao; Cao, Bing; Wang, Chinhua; Zhang, Jicai; Wang, Jianfeng; Xu, Ke


    Recently, gallium nitride (GaN) films grown on graphene have been widely studied. Here, we have grown low-threading-dislocation-density GaN films on graphene by hydride vapor phase epitaxy (HVPE). The full widths at half maximum (FWHMs) of X-ray rocking curves (XRCs) of the GaN films were 276 and 350 arcsec at the 0002 and 10\\bar{1}2 reflections, respectively. This shows that the threading dislocation densities are on the order of magnitude of 108 cm-2, which is consistent with the results of cathodoluminescence (CL).

  20. High-pressure synthesis of Na{sub 1-x}Li{sub x}MgH{sub 3} perovskite hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Coronado, R., E-mail: [Instituto de Ciencia de Materiales de Madrid, C.S.I.C., Cantoblanco, E-28049 Madrid (Spain); Sanchez-Benitez, J. [Instituto de Ciencia de Materiales de Madrid, C.S.I.C., Cantoblanco, E-28049 Madrid (Spain); Dpto. Quimica Fisica I, Facultad de Ciencias Quimicas, Universidad Complutense de Madrid, 28040 Madrid (Spain); Retuerto, M. [Department of Chemistry and Chemical Biology, Rutgers, The State University of New Jersey, 610 Taylor Road, Piscataway, NJ 08854-808 (United States); Fernandez-Diaz, M.T. [Institut Laue Langevin, BP 156X, Grenoble F-38042 (France); Alonso, J.A. [Instituto de Ciencia de Materiales de Madrid, C.S.I.C., Cantoblanco, E-28049 Madrid (Spain)


    Highlights: Black-Right-Pointing-Pointer New synthesis method for the ternary metal hydride perovskite system Na{sub 1-x}Li{sub x}MgH{sub 3}. Black-Right-Pointing-Pointer Direct reaction of simple hydrides under high-pressure and high-temperature conditions. Black-Right-Pointing-Pointer X-ray and Neutron Powder Diffraction analysis were used to identify the purity of the samples. Black-Right-Pointing-Pointer Perovskite hydride structure; more distorted and unstable as Li is introduced (smaller ionic size of Li{sup +}vs Na{sup +}). Black-Right-Pointing-Pointer Hydrogen desorption temperature much reduced respect to MgH{sub 2}; useful as hydrogen storage materials. - Abstract: Magnesium base alloys are very attractive for hydrogen storage due to their large hydrogen capacity, small weight and low-cost. We have designed a new synthesis method for the ternary metal hydride perovskite system Na{sub 1-x}Li{sub x}MgH{sub 3}, based on the direct reaction of simple hydrides under high-pressure and moderate-temperature conditions. Well-crystallized samples were obtained in a piston-cylinder hydrostatic press at moderate pressures of 2 GPa and temperatures around 750 Degree-Sign C from mixtures of MgH{sub 2}, NaH and LiH enclosed in gold capsules. X-ray and neutron powder diffraction analysis were used to identify the purity of the samples and provide an accurate description of the crystal structure features (GdFeO{sub 3} type). Na{sub 1-x}Li{sub x}MgH{sub 3} hydrides series (0 {<=} x {<=} 0.18) show an orthorhombic symmetry with space group Pnma (No. 62). Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) have been carried out to determine the hydrogen desorption temperatures.