WorldWideScience

Sample records for hydride abstraction initiated

  1. Preliminary development of flaw evaluation procedures for delayed hydride cracking initiation under hydride non-ratcheting conditions

    Energy Technology Data Exchange (ETDEWEB)

    Xu, S.; Cui, J.; Kawa, D.; Shek, G.K.; Scarth, D.A. [Kinectrics Inc., Toronto, Ontario (Canada)

    2006-07-01

    The flaw evaluation procedure for Delayed Hydride Cracking (DHC) initiation currently provided in the CSA Standard N285.8 was developed for hydride ratcheting conditions, in which flaw-tip hydrides do not completely dissolve at peak temperature. Test results have shown that hydrided regions formed under non-ratcheting conditions, in which flaw-tip hydrides completely dissolve at peak temperature, have significantly higher resistance to cracking than those formed under ratcheting conditions. This paper presents some preliminary work on the development of a procedure for the evaluation of DHC initiation for flaws under hydride non-ratcheting conditions. (author)

  2. Hydrogen storage as a hydride. Citations from the International Aerospace Abstracts data base

    Science.gov (United States)

    Zollars, G. F.

    1980-01-01

    These citations from the international literature concern the storage of hydrogen in various metal hydrides. Binary and intermetallic hydrides are considered. Specific alloys discussed are iron titanium, lanthanium nickel, magnesium copper and magnesium nickel among others.

  3. Hydrogen storage as a hydride. Citations from the International Aerospace Abstracts data base

    Science.gov (United States)

    Zollars, G. F.

    1980-01-01

    These citations from the international literature concern the storage of hydrogen in various metal hydrides. Binary and intermetallic hydrides are considered. Specific alloys discussed are iron titanium, lanthanium nickel, magnesium copper and magnesium nickel among others.

  4. Oxidation of alcohols by hydrogen peroxide, catalyzed by methyltrioxorhenium (MTO): A hydride abstraction

    Energy Technology Data Exchange (ETDEWEB)

    Zauche, T.H.; Espenson, J.H. [Ames Lab., IA (United States)]|[Iowa State Univ., Ames, IA (United States). Dept. of Chemistry

    1998-12-28

    Primary and secondary alcohols are oxidized using hydrogen peroxide as an oxygen donor and methyltrioxorhenium (MTO) as a catalyst. The methylrhenium di-peroxide, CH{sub 3}Re(O)({eta}{sub 2}-O{sub 2}){sub 2}(H{sub 2}O), was the dominant and reactive form of the catalyst. Representative rate constants k/L/mol s are 1.02 {times} 10{sup {minus}4} for 4-Me-{alpha}-methylbenzyl alcohol and 4.9 {times} 10{sup {minus}5} for 4-Cl-{alpha}-methylbenzyl alcohol. There was a kinetic isotope effect of 3.2 for the {alpha} C-H bond. When sec-phenethyl alcohol was labeled with {sup 18}O, 80% of the oxygen was retained in the ketone. Tests for the possible intervention of a free radical intermediate were carried out; the evidence was entirely negative. A mechanism featuring hydride abstraction is proposed, the first time for the H{sub 2}O{sub 2}/MTO system. Also, a cocatalytic set of reaction conditions has been developed on the synthetic scale, using bromide and MTO as cocatalysts, which cuts the reaction time from hours to minutes.

  5. Chemistry of guanidinate-stabilised diboranes: transition-metal-catalysed dehydrocoupling and hydride abstraction.

    Science.gov (United States)

    Wagner, Arne; Litters, Sebastian; Elias, Jana; Kaifer, Elisabeth; Himmel, Hans-Jörg

    2014-09-22

    Herein, we analyse the catalytic boron-boron dehydrocoupling reaction that leads from the base-stabilised diborane(6) [H2 B(hpp)]2 (hpp=1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidinate) to the base-stabilised diborane(4) [H2 B(hpp)]2 . A number of potential transition-metal precatalysts was studied, including transition-metal complexes of the product diborane(4). The synthesis and structural characterisation of two further examples of such complexes is presented. The best results for the dehydrocoupling reactions were obtained with precatalysts of Group 9 metals in the oxidation state of +I. The active catalyst is formed in situ through a multistep process that involves reduction of the precatalyst by the substrate [H2 B(hpp)]2 , and mechanistic investigations indicate that both heterogeneous and (slower) homogeneous reaction pathways play a role in the dehydrocoupling reaction. In addition, hydride abstraction from [H2 B(hpp)]2 and related diboranes is analysed and the possibility for subsequent deprotonation is discussed by probing the protic character of the cationic boron-hydrogen compounds with NMR spectroscopic analysis.

  6. Crack initiation at long radial hydrides in Zr-2. 5Nb pressure tube material at elevated temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Choubey, R.; Puls, M.P. (AECL Research, Pinawa, Manitoba (Canada). Whiteshell Labs.)

    1994-05-01

    Crack initiation at hydrides in smooth tensile specimens of Zr-2.5Nb pressure tube material was investigated at elevated temperatures up to 300 C using an acoustic emission (AE) technique. The test specimens contained long, radial hydride platelets. These hydrides have their plate normals oriented in the applied stress direction. Below [approximately]100 C, widespread hydride cracking was initiated at stresses close to the yield stress. An estimate of the hydride's fracture strength from this data yielded a value of [approximately]520 MPa at 100 C. Metallography showed that up to this temperature, cracking occurred along the length of the hydrides. However, at higher temperatures, there was no clear evidence of lengthwise cracking of hydrides, and fewer of the total hydride population fractured during deformation, as indicated by the AE record and the metallography. Moreover, the hydrides showed significant plasticity by-being able to flow along with the matrix material and align themselves parallel to the applied stress direction without fracturing. Near the fracture surface of the specimen, transverse cracking of the flow-reoriented hydrides had occurred at various points along the lengths of the hydrides. These fractures appear to be the result of stresses produced by large plastic strains imposed by the surrounding matrix on the less ductile hydrides.

  7. (abstract) Studies on AB(sub 5) Metal Hydride Alloys with Sn Additives

    Science.gov (United States)

    Ratnakumar, B. V.; Surampudi, S.; Stefano, S. Di; Halpert, G.; Witham, C.; Fultz, B.

    1994-01-01

    The use of metal hydrides as negative electrodes in alkaline rechargeable cells is becoming increasingly popular, due to several advantages offered by the metal hydrides over conventional anode materials (such as Zn, Cd) in terms of specific energy environmental cycle life and compatibility. Besides, the similarities in the cell voltage pressure characteristics, and charge control methods of the Ni-MH cells to the commonly used Ni-Cd point to a projected take over of 25% of the Ni-Cd market for consumer electronics by the Ni-MH cells in the next couple of years. Two classes of metal hydrides alloys based on rare earth metals (AB(sub 5)) and titanium (AB(sub 2)) are being currently developed at various laboratories. AB(sub 2) alloys exhibit higher specific energy than the AB(sub 5) alloys but the state of the art commercial Ni-MH cells are predominately manufactured using AB(sub 5) alloys.

  8. C(sp₃)-H bond activation with triel metals: indium and gallium zwitterions through internal hydride abstraction in rigid salan ligands.

    Science.gov (United States)

    Maudoux, Nicolas; Fang, Jian; Roisnel, Thierry; Dorcet, Vincent; Maron, Laurent; Carpentier, Jean-François; Sarazin, Yann

    2014-06-16

    The hydropyrimidine salan (salan=N,N'-dimethyl-N,N'-bis[(2-hydroxyphenyl)methylene]-1,2-diaminoethane) proteo-ligands with a rigid backbone {ON^(CH2)^NO}H2 react with M(CH2SiMe3)3 (M=Ga, In) to yield the zwitterions {ON^(CH(+))^NO}M(-)(CH2SiMe3)2 (M=Ga, 2; In, 3) by abstraction of a hydride from the ligand backbone followed by elimination of dihydrogen. By contrast, with Al2Me6, the neutral-at-metal bimetallic complex [{ON^(CH2)^NO}AlMe]2 ([1]2) is obtained quantitatively. The formation of indium zwitterions is also observed with sterically more encumbered ligands containing o-Me substituents on the phenolic rings, or an N (CHPh) N moiety in the heterocyclic core. Overall, the ease of C(sp3)-H bond activation follows the order Al≪Gametal-hydride species. DFT calculations indicate that the systems {ON^(CH2)^NO}H2+M(CH2SiMe3)3 (M=Al, Ga, In) all initially lead to the formation of the neutral monophenolate dihydrocarbyl species through a single protonolysis. From here, the thermodynamic product, the model neutral-at-metal complex 1, is formed in the case of aluminum after a second protonolysis. On the other hand, lower activation energy pathways lead to the generation of zwitterionic complexes 2 and 3 in the cases of gallium and indium, and the formation of these zwitterions obeys a strict kinetic control; the computations suggest that, as inferred from the experimental data, the reaction proceeds through an instable metal-hydride species, which could not be isolated synthetically.

  9. Initiation of delayed hydride cracking in zirconium-niobium micro pressure tubes

    Science.gov (United States)

    Sundaramoorthy, Ravi Kumar

    Pressure tubes pick up hydrogen while they are in service within CANDU reactors. Sufficiently high hydrogen concentration can lead to hydride precipitation during reactor shutdown/repair at flaws, resulting in the potential for eventual rupture of the pressure tubes by a process called Delayed Hydride Cracking (DHC). The threshold stress intensity factor (KIH) below which the cracks will not grow by delayed hydride cracking of Zr-2.5Nb micro pressure tubes (MPTs) has been determined using a load increasing mode (LIM) method at different temperatures. MPTs have been used to allow easy study of the impact of properties like texture and grain size on DHC. Previous studies on MPTs have focused on creep and effects of stress on hydride orientation; here the use of MPTs for DHC studies is confirmed for the first time. Micro pressure tube samples were hydrided to a target hydrogen content of 100 ppm using an electrolytic method. For DHC testing, 3 mm thick half ring samples were cut out from the tubes using Electrical Discharge Machining (EDM) with a notch at the center. A sharp notch with a root radius of 15 microm was introduced by broaching to facilitate crack initiation. The direct current potential drop method was used to monitor crack growth during the DHC tests. For the temperature range tested the threshold stress intensity factors for the micro pressure tube used were found to be 6.5--10.5 MPa.m 1/2 with the value increasing with increasing temperature. The average DHC velocities obtained for the three different test temperatures 180, 230 and 250°C were 2.64, 10.87 and 8.45 x 10-8 m/s, respectively. The DHC data obtained from the MPTs are comparable to the data published in the literature for full sized CANDU pressure tubes.

  10. Initial step of hydride formation in single crystalline gadolinium thin films and islands studied on the nm-scale

    Energy Technology Data Exchange (ETDEWEB)

    Wanjelik, Sara, E-mail: Sara.Wanjelik@hhu.de [Institute of Applied Physics, Universitätsstrasse 1, 40225 Düsseldorf (Germany); Stolboushkina, Oxana [Institute of Applied Physics, Universitätsstrasse 1, 40225 Düsseldorf (Germany); Sibirian State University of Industry, Novokuznetsk 654007 (Russian Federation); Königshofen, Samuel; Getzlaff, Mathias [Institute of Applied Physics, Universitätsstrasse 1, 40225 Düsseldorf (Germany)

    2015-10-05

    Highlights: • Hydride formation in Gd films depends on hydrogen pressure and annealing conditions. • Chain formation of disclike islands (diameter about 4 nm) in 1 0 1 0 direction appears. • A triangular shaped structure is observed together with discs. • Transformation to hydride in islands starts from the edges. • All hydrogen induced structures can be removed stepwise by annealing up to 350 °C. - Abstract: The initial steps of hydrogen absorption in gadolinium systems are investigated by means of scanning tunneling microscopy (STM) under ultra high vacuum conditions. Gadolinium is grown on a W(1 1 0) substrate. Smooth films or islands can be obtained depending on the preparation conditions. Exposure to hydrogen leads to modifications of the Gd surface. Small discs with a diameter of a few nm and a height of one atomic step appear. The discs form chains with distinct directions. A triangular shaped structure is observed together with the discs. Areas that are completely transformed to GdH{sub 2} appear, too. The absorption process in islands was also investigated and compared to the behaviour of thin films. All measurements are performed at room temperature. By increasing the temperature, changes of the different modifications can be observed up to the point at which they vanish.

  11. Resonance energies of the allyl cation and allyl anion: contribution by resonance and inductive effects toward the acidity and hydride abstraction enthalpy of propene.

    Science.gov (United States)

    Barbour, Josiah B; Karty, Joel M

    2004-02-06

    Density functional theory was employed to calculate the acidities and hydride abstraction enthalpies of propene (3) and propane (4), along with their vinylogues (5 and 6, respectively). The same reaction enthalpies were calculated for the propene vinylogues in which the terminal vinyl group was rotated perpendicular to the rest of the conjugated system (7). The contribution by resonance and inductive effects toward the acidity and hydride abstraction enthalpy of each vinylogue of 5 (n = 1-3) was computed and extrapolated to n = 0 (the parent propene system). The resonance energies of the allyl cation and anion were determined to be about 20-22 and 17-18 kcal/mol, respectively. Comparisons are made to resonance energies calculated using other methodologies.

  12. O2 insertion into group 9 metal-hydride bonds: evidence for oxygen activation through the hydrogen-atom-abstraction mechanism.

    Science.gov (United States)

    Keith, Jason M; Teets, Thomas S; Nocera, Daniel G

    2012-09-03

    A detailed density functional study was performed to examine the reaction of mixed-valence dirhodium and diiridium species [M(2)(0,II)(tfepma)(2)(CN(t)Bu)(2)(Cl)(2) (1, tfepma = MeN[P(OCH(2)CF(3))(2)](2), CN(t)Bu = tert-butyl isocyaninde)] with HCl and oxygen with an interest in examining the pathways for oxygen insertion into the intermediate metal hydride to form hydroperoxo species. The O(2) hydrogen atom abstraction mechanism for both the Rh and Ir was found to be feasible. This is the first time this mechanism has been applied to a Rh system and only the second time it has been examined for a system other than Pd. The competing trans HCl reductive elimination pathway was also examined and found to be greatly dependent on the stereochemistry of the starting hydride primarily due to the intermediate formed upon the loss of Cl(-). As a result, the reductive elimination pathway was more favorable by 11.5 kcal/mol for the experimentally observed Ir stereoisomer, while the two pathways were isoenergetic for the other stereoisomer of the Rh complex. All findings are consistent with the kinetics study previously performed.

  13. Abstracting Asynchronous Multi-Valued Networks: An Initial Investigation

    CERN Document Server

    Steggles, L Jason

    2011-01-01

    Multi-valued networks provide a simple yet expressive qualitative state based modelling approach for biological systems. In this paper we develop an abstraction theory for asynchronous multi-valued network models that allows the state space of a model to be reduced while preserving key properties of the model. The abstraction theory therefore provides a mechanism for coping with the state space explosion problem and supports the analysis and comparison of multi-valued networks. We take as our starting point the abstraction theory for synchronous multi-valued networks which is based on the finite set of traces that represent the behaviour of such a model. The problem with extending this approach to the asynchronous case is that we can now have an infinite set of traces associated with a model making a simple trace inclusion test infeasible. To address this we develop a decision procedure for checking asynchronous abstractions based on using the finite state graph of an asynchronous multi-valued network to reas...

  14. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Cognitive Structure of Scientific Theory in the Scientist-Philosopher's Eyes、Two Theories of Scientific Abstraction Centered on Practices、Many-worlds Interpretation in Quantum Measurement and Its Meaning、Scientific Instrument: Paradigm Shift from Instrumentalism to Realism and Phenomenology

  15. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    [ Abstract] Interaction between China and the international system has been a highlighted is- sue and drawing a great deal of attention all over the world. It has been approached from structural point of view and in a way of a conflicting pair of self and the other, which is the prevailing ontological perspective of IR studies. Contrary to it, processual

  16. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The Western Theories of War Ethics and Contemporary Controversies Li Xiaodong U Ruijing (4) [ Abstract] In the field of international relations, war ethics is a concept with distinct westem ideological color. Due to factors of history and reality, the in

  17. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    China' s Dual-identity Dilemma and Its Countermeasm'es Li Shaojun(4) [ Abstract] The international system, as the overall structure for interactions among actors, is the environment and stage for implementation of China' s foreign policy. In this system, identity is a fundamental factor determining China' s international position and interests, and how to achieve them. China has long stressed that it is a "developing country,"

  18. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Abstract: The ethylene plant at SINOPEC Shanghai Petrochemical Company Limited ranked in the middle among SINOPEC subsidiaries in terms of ethylene and propylene yields, technical economical indicator and so on, and its performance ranking went no further in chemical sector. By means of feedstock optimization, steam optimization, and energy saving and consumption reduction, the company enhanced its competitiveness in the market and improved its efficiency. In addition, some ideas were put forward on performance improvement of the ethylene plant in the future.

  19. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    [ Abstract ] The global resurgence of religion and the return of religion from the so-call "Westphalia Exile" to the central stage of international religions have significantly trans- formed the viewpoints of both media and academia toward the role of religion in IR, and the challenges posed by religion to the contemporary international relations are often described as entirely subversive. The author argues that as a second-tier factor in most countries' for- eign policies and international affairs,

  20. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    As a representative kind of "new diplomacy", the Silk Road Economic Beltand 21st Century Maritime Initiatives have aroused different responses at homeand abroad. They are important initiatives about co-building the Belt and Road,and give full play to China's strengths in the era of globalization. It is an importantopportunity to promote public diplomacy. The crux of the Initiatives lies in ourefforts in enhancing the awareness of cooperation, strengthening investigation andresearch, promoting mutual understanding, highlighting advantages and shunningdisadvantages for mutual benefit and win-win results through responding to theneeds of all parties.

  1. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The Research of the Subsistent States of the Artists Living in Guilin During the Anti-Japanese Period;A Brief History of Calligraphy Art of Chongqing as Provisional Capital during the Anti-Japanese Period;The Endless Stream and Terraced Mountains:on the Analysisof Spacein Chinese Landscape Painting of Gongxian;Political Vanguard in the Perspective View of the Formalism Aesthetic: 1980s Abstract Painting in China;Comparison of the Early-Stage Spreading of Western Pre-Modem Style Painting and Its Influence in China and Japan.

  2. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    (1) Lenin's "Unity of Three Dialectics": Notes Science of Logic and The Capital on Philosophy in the Dual Contexts of Sun Zhengyu 4 Lenin's dialectics in Notes on Philosophy is essentially a unity of materialistic logic, dialectics and epistemology that has arisen from interactions between Hegel' s Science of Logic and Marx' s The Capital. Due to a lack of understanding of Lenin' s "unity of three dialectics," people tend to misunderstand his dialectics for the meeting of two extremes of the "sum total of living instances" and "abstract methods,

  3. ABSTRACT

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    --Based on of Marx's Economic Philosophy Manuscripts of 1844 HE Jian-jin (Philosophy Department, Fujian Provincial Committee Party School, Fuzhou, Fujian 350012, China) Abstract: Socialism with Chinese characteristics has a close relationship with the return and growth of capital in China. To implement the scientific concept of development, we must confront the problem of scientifically controlling the capital. In Economic and Philosophical Manuscripts of 1844, Marx criticized the three old philosophical thinking of treating capital: Object-oriented thinking, intuitive thinking, purely spiritual abstract thinking, and he established his own unique understanding of the capital that is to understand the capital from the human perceptual activities and practical activities. Contemporary Chinese society exist the problem of underdevelopment and abnormal development, and the three heterogeneity problems of pre-modern, modern, postmodern concurrent. In order to implement the scientific concept of development, we must reject any abstract positive or negative to modern basic principles under the guidance of the capital, against the eternal capital theory and capital theory of evil, and we must oppose the thinking that the capital is eternal or evil. Key words: socialism with Chinese characteristics; capital; national economics; scientific concept of development

  4. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Discussion on main hydraulic performance parameters' model acceptance test of mixed flow pump turbine YU Ji-xing, LI Jin-wei, CHEN Liu, REN Shao-cheng, JIANG Ming-li, LI Hai-ling (China Institute of Water Resources and Hydropower Research, Beijing 100038, China) Abstract: Model acceptance test content and main performance parameter' acceptance mode of mixed flow pump turbine were introduced, main hydraulic performance parameters, such as hump of pump high lift region and S unstable region during turbine starting, were discussed, after that, frequency characteristic of pressure fluctuation beside guide blade area were presented in briefly. Key words: pump turbine; model acceptance test; hump region; "S" region; pressure fluctuation

  5. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Spiritual Construction and Its Ideological Sources in Contemporary China The spiritual construction in contemporary China is an important ideological task proposed by the historical practice of China. Modernized development often entails the meaning of entering into " modern civilization. " Nevertheless, an abstract understanding of this civilization has covered up its essential stipulation and historical nature. China has pursued its development on a different historical prerequisite from the west, and therefore, only partially belongs to modern capitalist modernization. The practical prospects of Chinese development imply a transformation and remodeling of the general lifestyle, life attitudes and values, which inevitably calls for a new form of philosophy. The ideological sources for this new philosophy are: Chinese philosophy, Western integration of them may point to philosophy and Marxist philosophy. A creative a potentially new type of civilization.

  6. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On Rousseau's Equality and Freedom GONG Qun Abstract:Equality and freedom are the two core concepts of political philosophy and Rousseau~s political philosophy is no exception. Freedom and equality in Rousseau in- cludes two levels: natural state and social state under social contract, and among them, there is one state of un-equality. The relationship between the two concepts here is that equality is a necessary precondition of freedom, and that there is no equality, there is no freedom. The achievement of Rousseau~s equality is by one contractual behavior that all the members transfer their rights, especially property rights, and form of the Community. Freedom in Rousseau's mind is through the people's sovereignty in the Community to achieve freedom.

  7. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    (1) ASEAN Security Community: Power Containment and Norm Construction --From the Perspective of Realist-Constructivism Zheng Ying-qin . 11 . Abstract:Combined of realism and constructivism, realist-constructivism emphasizes the interactions between power and identity through norms and their influence on international relations. From the perspective of realist-con- structivism, this article analyses the construction of ASEAN security community and figures out two main clues in the n of ASEAN : the containment of power system that facilitate the strategic cooperation of ASEAN and norms which promotes the cooperation. ASEAN has made achievements in security cooperation but security community. There are still lots of problems ASEAN needs to tackle, for example, to con- institution as well as to strengthen the regional economic interdependence. The possible way to pro- mote the ASEAN security community may start from the area of non-traditional security cooperation Key Wwords: ASEAN security community ; Realist-Constructivism ; power; norm

  8. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On the Construction of Water Conservancy during 1930s in Hubei Yu Tao ( 1 ) Abstract: Two extra-large floods in the 1930s had drawn the National Government's attention to introspect itself. After those disasters, the government had made some progress by a series of measures like repairing the dike, completing water conservancy institutions and enacting regulations in order to strengthen the water conservancy construction in Hubei. The government took water conservancy construction as a complex system project so that they had a relatively comprehensive consideration. It reflects the advancement of modern government to mobilize local people and put such social power into the unified planning. However, thelimitations of the government's policy implementation weakened the effect of water conservancy construction. Keywords: flood; government; water conservancy construction; effect

  9. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Shift of World Center and the Change of the International System Yan Xuetong Abstract: The power transition caused by China' s rise will not only change the international configuration, but could also result in the world cen- ter shifting from Europe to Asia. However, neither a change in the interna- tional configuration nor the shift of the world center implies a change of the type of the international system. The international system is composed of three elements: international actors, international configuration and interna- tional norms. It will be neither possible to distinguish international system from its components nor clarify relations between components and system if changes in one element are treated as change of types of international system.

  10. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Western Characteristics of the Pardims of International Studies in America:With the Huaxla System as a Counterexample Ye Zicheng (4)[ Abstract ] Three flaws are obvious in the three paradigms of International Studies in America. Specifically, their arguments are based on the assumption that the world is anarchic ; they go too far in employing the scientific and rational methodology; they pay little attention to the humans. Hence, the three paradigms of international studies in America aren' t necessarily useful for the explanation of China' s history and culture as well as its relations with the outside world. The Huaxia system, for example, is anarchic but also apparently hierarchical; the approach of pursuing security in understanding the rise of western powers may be meaningless, for the hegemony in the Huaxia System needn't worry about its security; the theory of power-balancing seemingly couldn' t explain why Qin ended up in defeating the alliance of the other six states in the Warring-states period. The Huaxia system is quite open, and has free movement of people, goods, and ideas. Some interstate regimes and institutions were formed through Huimeng (alliance-making) among states. However, this kind of limited and fragile interdependence and cooperation soon came to an end after the hegemonies of Qi, Jin and Wei. There does exit the identity problem among states in the Huaxia System, but this problem doesn't play such a great role as the constructivists expect it would.

  11. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Strategic Realism: An Option for China' s Grand Strategy Song Dexing (4) [ Abstract] As a non-Western emerging power, China should positively adapt its grand strategy to the strategic psychological traits in the 21st century, maintain a realist tone consistent with the national conditions of China, and avoid adventurist policies while awaring both strategic strength and weakness. In the 21st century, China' s grand strategy should be based on such core values as security, development, peace and justice, especially focusing on development in particular, which we named "strategic realism". Given the profound changes in China and the world, strategic realism encourages active foreign policy to safe- guard the long-term national interests of China. Following the self-help logic and the fun- damental values of security and prosperity, strategic realism concerns national interests as its top-priority. It advocates smart use of power, and aims to achieve its objectives by optimizing both domestic and international conditions. From the perspective of diplomatic phi- losophy, strategic realism is not a summarization of concrete policies but a description of China' s grand strategy orientations in the new century. [ Key Words] China, grand strategy, strategic realism [ Author]Song Dexing, Professor, Ph.D. Supervisor, and Director of the Center for International Strategic Studies, University of International Studies of PLA.

  12. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Discussions of Design Highlights for Tailgas Treatment in Sulphuric Acid Plant Using New Technology for Flue Gas Desulfurization Through Catalytic Reduction LI Xin , CAO Long-wen , YIN Hua-qiang , El Yue-li , LI Jian-iun ( 1 ,College of Architecture and Environment, Sichuan University, Chengdu 610065, China;2 ,Daye Nonferrous Metals Co., Ltd., Huangshi 435000, China; 3 ,Tile Sixth Construction Company Ltd. of China National Chemical Engineering Corp., Xiangfan 441021, China) Abstract : For the present situation of tailgas treatment in current sulphuric acid plants and existing problems with commonly used technologies, the fun- damental working principle, process flow and reference project for a new technology for flue gas desulfurization through catalytic redaction which is used for tailgas treatment in a sulphuric acid plant and recovery of sulphur resource are outlined. The design highlights of this technology are analyzed and the are proposed. Compared to conventional technologies, this new technology offers high desulfurization efficiency and unique technology, which can effectively tackle the difficuhies of tailgas treatment in sulphuric acid plants after enforcement of the new standard. This new technology is thought to be significant economic benefit, environmental benefit, as well as a promising future of application.

  13. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    [Abstract] The essay analyzed the action logic of hegemon with a power approach. Hegemony can be classified as benign or malignant. A benign hegemon should be pro- ductive, inclusive and maintain procedure justice when it uses its power. The power of hegemon can be categorized into two types: the hard power, which is the use of coer- cion and payment and can be measured by public products, and the soft power, which shows the ability to attract and co-opt and can be measured by the relationship-specific investments. The relationship between the input of public products and the relationship -specific investments is not positively correlative. Confusing with the public products and the soft power might lead to strategic misleading. A country rich in power re- sources should comply with the following principles if it wanted to improve its hard power and soft power: first, analyze the scope of the existing hegemon's soft power and avoid investing public products in the scope; second, maintain honesty in a long term and continue to increase others' benefits following the rule of neutral Pareto im- provement; third, provide both public goods and public bads; fourth, be more patient to obtain soft power. [ Key Words] hegemon, soft power, relationship-specific investment, strategic misleading [Authors]Feng Weijiang, Ph.D., Associate Professor, Institute of World Economics and Politics, Chinese Academy of Social Science; Yu Jieya, Master, PBC Shanghai Headquarters.

  14. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    China gradually got rid of foreign controls and finally became one of Great Powers from the "Sick man of East Asia" during the Republican era. During this period, intellectuals played significant roles both from the perspective of knowledge building and from the practical perspective. With respect to knowledge building, intellectuals initiatively introduced western knowledge and constructed a new knowledge framework about international relations based on the Chinese tradition in order to counter the shock of external knowledge and reduce the frustration from the collapse of Tributary System, which made China deal with the New world with much more self-confidence. The progress on knowledge building also provide theoretical foundation of foreign attitude and shape the Chinese, especially the elites' perceptions towards international affairs. Meanwhile, intellectuals attempted to deliver Chinese voices through diverse international platforms,

  15. Easy abstraction of a hydride anion from an alkyl C-H bond of a coordinated bis(N-heterocyclic carbene).

    Science.gov (United States)

    Cabeza, Javier A; Damonte, Marina; García-Álvarez, Pablo; Pérez-Carreño, Enrique

    2013-04-07

    The high basicity of a trimethylene-linked bis(NHC), acting as a chelating ligand in a ruthenium(0) complex, is responsible for its involvement in a room-temperature reaction in which the metal atom to which this bis(NHC) ligand is coordinated replaces a hydride anion of the ligand trimethylene linker, which can be taken by a hydride abstractor as unusual, in that role, as [Ru3(CO)12].

  16. Ring-opening copolymerization of (R,S-β-butyrolactone and ε-caprolactone using sodium hydride as initiator

    Directory of Open Access Journals (Sweden)

    2010-07-01

    Full Text Available Copolymers of racemic β-butyrolactone ((R,S-BL and ε-caprolactone (CL, were synthesized by ring-opening polymerization initiated by sodium hydride (NaH. The initiator exhibited a satisfactory catalytic activity, producing copolymers whose yields are greatly influenced by the feed monomer ratio, CL/BL. All polymers obtained were characterized by nuclear magnetic resonance (NMR, gel permeation chromatography (GPC, thermogravimetric analysis (TGA, differential scanning calorimetry (DSC and wide angle X-rays scattering, WAXS. The molar composition of copolyesters determined by 1H-NMR spectra, showed that the incorporation of CL is favoured over the incorporation of (R,S-BL. Gel permeation chromatography and 13C-NMR spectra indicated that CL/BL copolymers had block sequence distribution. The TGA analysis of copolymers showed that these copolymers are stable up to temperatures near 200°C, followed by a decomposition process in two steps; the first one is attributed to the (R,S-BL block degradation and the second to the remaining PCL block. The crystallization process of these copolymers was studied by DSC and WAXS showing that the amorphous (R,S-BL segments chains did not affect the crystallinity of the PCL blocks.

  17. Production of propylene from 1-butene on highly active "bi-functional single active site" catalyst: Tungsten carbene-hydride supported on alumina

    KAUST Repository

    Mazoyer, Etienne

    2011-12-02

    1-Butene is transformed in a continuous flow reactor over tungsten hydrides precursor W-H/Al2O3, 1, giving a promising yield into propylene at 150 °C and different pressures. Tungsten carbene-hydride single active site operates as a "bi-functional catalyst" through 1-butene isomerization on W-hydride and 1-butene/2-butenes cross-metathesis on W-carbene. This active moiety is generated in situ at the initiation steps by insertion of 1-butene on tungsten hydrides precursor W-H/Al2O3, 1 followed by α-H and β-H abstraction. © 2011 American Chemical Society.

  18. Abstract fractional integro-differential equations involving nonlocal initial conditions in α-norm

    Directory of Open Access Journals (Sweden)

    Wang Rong-Nian

    2011-01-01

    Full Text Available Abstract In the present paper, we deal with the Cauchy problems of abstract fractional integro-differential equations involving nonlocal initial conditions in α-norm, where the operator A in the linear part is the generator of a compact analytic semigroup. New criterions, ensuring the existence of mild solutions, are established. The results are obtained by using the theory of operator families associated with the function of Wright type and the semigroup generated by A, Krasnoselkii's fixed point theorem and Schauder's fixed point theorem. An application to a fractional partial integro-differential equation with nonlocal initial condition is also considered. Mathematics subject classification (2000 26A33, 34G10, 34G20

  19. Highly regioselective hydride transfer, oxidative dehydrogenation, and hydrogen-atom abstraction in the thermal gas-phase chemistry of [Zn(OH)](+)/C3H8.

    Science.gov (United States)

    Wu, Xiao-Nan; Zhao, Hai-Tao; Li, Jilai; Schlangen, Maria; Schwarz, Helmut

    2014-12-28

    The thermal reactions of [Zn(OH)](+) with C3H8 have been studied by means of gas-phase experiments and computational investigation. Two types of C-H bond activation are observed in the experiment, and pertinent mechanistic features include inter alia: (i) the metal center of [Zn(OH)](+) serves as active site in the hydride transfer to generate [i-C3H7](+) as major product, (ii) generally, a high regioselectivity is accompanied by remarkable chemoselectivity: for example, the activation of a methyl C-H bond results mainly in the formation of water and [Zn(C3,H7)](+). According to computational work, this ionic product corresponds to [HZn(CH3CH=CH2)](+). Attack of the zinc center at a secondary C-H bond leads preferentially to hydride transfer, thus giving rise to the generation of [i-C3H7](+); (iii) upon oxidative dehydrogenation (ODH), liberation of CH3CH2=CH2 occurs to produce [HZn(H2O)](+). Both, ODH as well as H2O loss proceed through the same intermediate which is characterized by the fact that a methylene hydrogen atom from the substrate is transferred to the zinc and one hydrogen atom from the methyl group to the OH group of [Zn(OH)](+). The combined experimental/computational gas-phase study of C-H bond activation by zinc hydroxide provides mechanistic insight into related zinc-catalyzed large-scale processes and identifies the crucial role that the Lewis-acid character of zinc plays.

  20. Probing the cerium/cerium hydride interface using nanoindentation

    Energy Technology Data Exchange (ETDEWEB)

    Brierley, Martin, E-mail: martin.brierley@awe.co.uk [Atomic Weapons Establishment, Aldermaston, Berkshire RG7 4PR (United Kingdom); University of Manchester, Manchester M13 9PL (United Kingdom); Knowles, John, E-mail: john.knowles@awe.co.uk [Atomic Weapons Establishment, Aldermaston, Berkshire RG7 4PR (United Kingdom)

    2015-10-05

    Highlights: • A disparity exists between the minimum energy and actual shape of a cerium hydride. • Cerium hydride is found to be harder than cerium metal by a ratio of 1.7:1. • A zone of material under compressive stress was identified surrounding the hydride. • No distribution of hardness was apparent within the hydride. - Abstract: A cerium hydride site was sectioned and the mechanical properties of the exposed phases (cerium metal, cerium hydride, oxidised cerium hydride) were measured using nanoindentation. An interfacial region under compressive stress was observed in the cerium metal surrounding a surface hydride that formed as a consequence of strain energy generated by the volume expansion associated with precipitation of the hydride phase.

  1. Stress Corrosion Cracks Initiation Process Model Involving Repetition of Growth and Breaking of Oxide Passive Film or Hydride Layer on Stainless Alloy

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, G.; Sakakibara, Y. [Research Laboratory, IHI Corporation (Japan)

    2009-07-01

    The surface of stainless alloy is covered with oxide film such as Cr{sub 2}O{sub 3} and is passivated in neutral aqueous solution. This film attains a thickness that may be expressed in micro meter units({mu}m) and may undergo partial rupture physically in a high-temperature oxygen enriched water environment. Crack propagation occurs through repeated growth and rupture of the oxide film; the rupturing process is designated as tarnish rupture type SCC. Individual cracks are initiated randomly for film of uniform thickness and this process may be described by the stochastic model. Hydride layer formation occurs on the alloy surface under the proper conditions, using titanium in a reducing neutral water environment. Crack initiation may thus also be described by a model similar to that for film rupture. (authors)

  2. An initial-abstraction, constant-loss model for unit hydrograph modeling for applicable watersheds in Texas

    Science.gov (United States)

    Asquith, William H.; Roussel, Meghan C.

    2007-01-01

    Estimation of representative hydrographs from design storms, which are known as design hydrographs, provides for cost-effective, riskmitigated design of drainage structures such as bridges, culverts, roadways, and other infrastructure. During 2001?07, the U.S. Geological Survey (USGS), in cooperation with the Texas Department of Transportation, investigated runoff hydrographs, design storms, unit hydrographs,and watershed-loss models to enhance design hydrograph estimation in Texas. Design hydrographs ideally should mimic the general volume, peak, and shape of observed runoff hydrographs. Design hydrographs commonly are estimated in part by unit hydrographs. A unit hydrograph is defined as the runoff hydrograph that results from a unit pulse of excess rainfall uniformly distributed over the watershed at a constant rate for a specific duration. A time-distributed, watershed-loss model is required for modeling by unit hydrographs. This report develops a specific time-distributed, watershed-loss model known as an initial-abstraction, constant-loss model. For this watershed-loss model, a watershed is conceptualized to have the capacity to store or abstract an absolute depth of rainfall at and near the beginning of a storm. Depths of total rainfall less than this initial abstraction do not produce runoff. The watershed also is conceptualized to have the capacity to remove rainfall at a constant rate (loss) after the initial abstraction is satisfied. Additional rainfall inputs after the initial abstraction is satisfied contribute to runoff if the rainfall rate (intensity) is larger than the constant loss. The initial abstraction, constant-loss model thus is a two-parameter model. The initial-abstraction, constant-loss model is investigated through detailed computational and statistical analysis of observed rainfall and runoff data for 92 USGS streamflow-gaging stations (watersheds) in Texas with contributing drainage areas from 0.26 to 166 square miles. The analysis is

  3. Boron Hydrides

    Science.gov (United States)

    1946-07-01

    of direct interest could be b.P.4d. ’Thus the discovory of a now proj.ect, since silano is probably too readily infla-zmablo for practical usc’ this...devoted, ho specc4fie compounds vhitih a’-ould be tocdte at prescnt arc: nron tiy * silano , %;2.SiFi3 , diothyl sila~no, (C2 115 )2 Si112, mono r.-rop; ! (n...Bcrohydrido or Li h.... I .A-4A- The prepuation of Silano med of Stannane by the interaction or lithium aluzirun hydride v-ithl silicon tetrtchiorido and

  4. Fundamental experiments on hydride reorientation in zircaloy

    Science.gov (United States)

    Colas, Kimberly B.

    reoriented hydride fraction and connectivity increase with number of cycles which could lead to more dangerous microstructure for storage of spent fuel. Pre-existing cracks were also found to affect hydride connectivity and morphology which directly impacts DHC and fuel integrity. (Abstract shortened by UMI.).

  5. Deformylation Reaction by a Nonheme Manganese(III)-Peroxo Complex via Initial Hydrogen-Atom Abstraction.

    Science.gov (United States)

    Barman, Prasenjit; Upadhyay, Pranav; Faponle, Abayomi S; Kumar, Jitendra; Nag, Sayanta Sekhar; Kumar, Devesh; Sastri, Chivukula V; de Visser, Sam P

    2016-09-05

    Metal-peroxo intermediates are key species in the catalytic cycles of nonheme metalloenzymes, but their chemical properties and reactivity patterns are still poorly understood. The synthesis and characterization of a manganese(III)-peroxo complex with a pentadentate bispidine ligand system and its reactivity with aldehydes was studied. Manganese(III)-peroxo can react through hydrogen-atom abstraction reactions instead of the commonly proposed nucleophilic addition reaction. Evidence of the mechanism comes from experiments which identify a primary kinetic isotope effect of 5.4 for the deformylation reaction. Computational modeling supports the established mechanism and identifies the origin of the reactivity preference of hydrogen-atom abstraction over nucleophilic addition.

  6. Advanced Hydride Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Motyka, T.

    1989-01-01

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  7. Advanced Hydride Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Motyka, T.

    1989-12-31

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, ``cold,`` process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility`s metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  8. Trialkylborane-Assisted CO(2) Reduction by Late Transition Metal Hydrides.

    Science.gov (United States)

    Miller, Alexander J M; Labinger, Jay A; Bercaw, John E

    2011-01-01

    Trialkylborane additives promote reduction of CO(2) to formate by bis(diphosphine) Ni(II) and Rh(III) hydride complexes. The late transition metal hydrides, which can be formed from dihydrogen, transfer hydride to CO(2) to give a formate-borane adduct. The borane must be of appropriate Lewis acidity: weaker acids do not show significant hydride transfer enhancement, while stronger acids abstract hydride without CO(2) reduction. The mechanism likely involves a pre-equilibrium hydride transfer followed by formation of a stabilizing formate-borane adduct.

  9. Theoretical study of the oxidation mechanisms of naphthalene initiated by hydroxyl radicals: the H abstraction pathway.

    Science.gov (United States)

    Shiroudi, Abolfazl; Deleuze, Michael S

    2014-05-22

    Reaction mechanisms for the initial stages of naphthalene oxidation at high temperatures (T ≥ 600 K) have been studied theoretically using density functional theory along with various exchange-correlation functionals, as well as the benchmark CBS-QB3 quantum chemical approach. These stages correspond to the removal of hydrogen atoms by hydroxyl radical and the formation thereby of 1- and 2-naphthyl radicals. Bimolecular kinetic rate constants were estimated by means of transition state theory. The excellent agreement with the available experimental kinetic rate constants demonstrates that a two-step reaction scheme prevails. Comparison with results obtained with density functional theory in conjunction with various exchange-correlation functionals also shows that DFT remains unsuited for quantitative insights into kinetic rate constants. Analysis of the computed structures, bond orders, and free energy profiles demonstrates that the reaction steps involved in the removal of hydrogen atoms by OH radicals satisfy Hammond's principle. Computations of branching ratios also show that these reactions do not exhibit a particularly pronounced site-selectivity.

  10. Synthesis of ruthenium hydride

    Science.gov (United States)

    Kuzovnikov, M. A.; Tkacz, M.

    2016-02-01

    Ruthenium hydride was synthesized at a hydrogen pressure of about 14 GPa in a diamond-anvil cell. Energy-dispersive x-ray diffraction was used to monitor the ruthenium crystal structure as a function of hydrogen pressure up to 30 GPa. The hydride formation was accompanied by phase transition from the original hcp structure of the pristine metal to the fcc structure. Our results confirmed the theoretical prediction of ruthenium hydride formation under hydrogen pressure. The standard Gibbs free energy of the ruthenium hydride formation reaction was calculated assuming the pressure of decomposition as the equilibrium pressure.

  11. Crystal structure of gold hydride

    Energy Technology Data Exchange (ETDEWEB)

    Degtyareva, Valentina F., E-mail: degtyar@issp.ac.ru

    2015-10-05

    Highlights: • Volume expansion of metal hydrides is due to the increase in the s-band filling. • AuH structure is similar to that of Hg having one more s electron compared to Au. • Structure stability of both Hg and AuH is governed by the Hume-Rothery rule. - Abstract: A number of transition metal hydrides with close-packed metal sublattices of fcc or hcp structures with hydrogen in octahedral interstitial positions were obtained by the high-pressure-hydrogen technique described by Ponyatovskii et al. (1982). In this paper we consider volume increase of metals by hydrogenation and possible crystal structure of gold hydride in relation with the structure of mercury, the nearest neighbor of Au in the Periodic table. Suggested structure of AuH has a basic tetragonal body-centered cell that is very similar to the mercury structure Hg-t I 2. The reasons of stability for this structure are discussed within the model of Fermi sphere–Brillouin zone interactions.

  12. Hysteresis in Metal Hydrides.

    Science.gov (United States)

    Flanagan, Ted B., And Others

    1987-01-01

    This paper describes a reproducible process where the irreversibility can be readily evaluated and provides a thermodynamic description of the important phenomenon of hysteresis. A metal hydride is used because hysteresis is observed during the formation and decomposition of the hydride phase. (RH)

  13. Lattice contraction in photochromic yttrium hydride

    Energy Technology Data Exchange (ETDEWEB)

    Maehlen, Jan Petter, E-mail: jepe@ife.no; Mongstad, Trygve T.; You, Chang Chuan; Karazhanov, Smagul

    2013-12-15

    Highlights: •Photochromic yttrium hydride films (YH:O) were prepared by reactive sputtering. •Black and transparent YH:O films were studied by time-resolved synchrotron XRD. •Both YH:O samples showed a lattice contraction upon illumination. •Also exposure to the X-ray beam itself results in a lattice contraction. -- Abstract: A strong photochromic effect was recently discovered in thin films of oxygen-containing yttrium hydride taking place at room temperature and reacting to ultraviolet and visible light. In this paper, we report on a lattice contraction upon illumination observed for thin-film samples of photochromic yttrium hydride, recorded by time-resolved X-ray diffraction using synchrotron radiation. The time dependence of the lattice contraction is consistent with the observed photochromic response of the samples.

  14. Micro-scale fracture experiments on zirconium hydrides and phase boundaries

    Science.gov (United States)

    Chan, H.; Roberts, S. G.; Gong, J.

    2016-07-01

    Fracture properties of micro-scale zirconium hydrides and phase boundaries were studied using microcantilever testing methods. FIB-machined microcantilevers were milled on cross-sectional surfaces of hydrided samples, with the most highly-stressed regions within the δ-hydride film, within the α-Zr or along the Zr-hydride interface. Cantilevers were notched using the FIB and then tested in bending using a nanoindenter. Load-displacement results show that three types of cantilevers have distinct deformation properties. Zr cantilevers deformed plastically. Hydride cantilevers fractured after a small amount of plastic flow; the fracture toughness of the δ-hydride was found to be 3.3 ± 0.4 MPam1/2 and SEM examination showed transgranular cleavage on the fracture surfaces. Cantilevers notched at the Zr-hydride interface developed interfacial voids during loading, at loads considerably lower than that which initiate brittle fracture of hydrides.

  15. Creating nanoshell on the surface of titanium hydride bead

    Directory of Open Access Journals (Sweden)

    PAVLENKO Vyacheslav Ivanovich

    2016-12-01

    Full Text Available The article presents data on the modification of titanium hydride bead by creating titanium nanoshell on its surface by ion-plasma vacuum magnetron sputtering. To apply titanium nanoshell on the titanium hydride bead vacuum coating plant of multifunctional nanocomposite coatings QVADRA 500 located in the center of high technology was used. Analysis of the micrographs of the original surface of titanium hydride bead showed that the microstructure of the surface is flat, smooth, in addition the analysis of the microstructure of material surface showed the presence of small porosity, roughness, mainly cavities, as well as shallow longitudinal cracks. The presence of oxide film in titanium hydride prevents the free release of hydrogen and fills some micro-cracks on the surface. Differential thermal analysis of both samples was conducted to determine the thermal stability of the initial titanium hydride bead and bead with applied titanium nanoshell. Hydrogen thermal desorption spectra of the samples of the initial titanium hydride bead and bead with applied titanium nanoshell show different thermal stability of compared materials in the temperature range from 550 to 860о C. Titanium nanoshells applied in this way allows increasing the heat resistance of titanium hydride bead – the temperature of starting decomposition is 695о C and temperature when decomposition finishes is more than 1000о C. Modified in this way titanium hydride bead can be used as a filler in the radiation protective materials used in the construction or upgrading biological protection of nuclear power plants.

  16. Regenerative Hydride Heat Pump

    Science.gov (United States)

    Jones, Jack A.

    1992-01-01

    Hydride heat pump features regenerative heating and single circulation loop. Counterflow heat exchangers accommodate different temperatures of FeTi and LaNi4.7Al0.3 subloops. Heating scheme increases efficiency.

  17. Regenerative Hydride Heat Pump

    Science.gov (United States)

    Jones, Jack A.

    1992-01-01

    Hydride heat pump features regenerative heating and single circulation loop. Counterflow heat exchangers accommodate different temperatures of FeTi and LaNi4.7Al0.3 subloops. Heating scheme increases efficiency.

  18. Helium trapping at erbium oxide precipitates in erbium hydride

    Energy Technology Data Exchange (ETDEWEB)

    Foiles, Stephen M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Battaile, Corbett Chandler [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-02-01

    The formation of He bubbles in erbium tritides is a significant process in the aging of these materials. Due to the long-standing uncertainty about the initial nucleation process of these bubbles, there is interest in mechanisms that can lead to the localization of He in erbium hydrides. Previous work has been unable to identify nucleation sites in homogeneous erbium hydride. This work builds on the experimental observation that erbium hydrides have nano- scale erbium oxide precipitates due to the high thermodynamic stability of erbium oxide and the ubiquitous presence of oxygen during materials processing. Fundamental DFT calculations indicate that the He is energetically favored in the oxide relative to the bulk hydride. Activation energies for the motion of He in the oxide and at the oxide-hydride interface indicate that trapping is kinetically feasible. A simple kinetic Monte Carlo model is developed that demonstrates the degree of trapping of He as a function of temperature and oxide fraction.

  19. Lightweight hydride storage materials

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, G.J.; Guthrie, S.E.; Bauer, W. [Sandia National Labs., Livermore, CA (United States)

    1995-09-01

    The need for lightweight hydrides in vehicular applications has prompted considerable research into the use of magnesium and its alloys. Although this earlier work has provided some improved performance in operating temperature and pressure, substantial improvements are needed before these materials will significantly enhance the performance of an engineered system on a vehicle. We are extending the work of previous investigators on Mg alloys to reduce the operating temperature and hydride heat of formation in light weight materials. Two important results will be discussed in this paper: (1) a promising new alloy hydride was found which has better pressure-temperature characteristics than any previous Mg alloy and, (2) a new fabrication process for existing Mg alloys was developed and demonstrated. The new alloy hydride is composed of magnesium, aluminum and nickel. It has an equilibrium hydrogen overpressure of 1.3 atm. at 200{degrees}C and a storage capacity between 3 and 4 wt.% hydrogen. A hydrogen release rate of approximately 5 x 10{sup -4} moles-H{sub 2}/gm-min was measured at 200{degrees}C. The hydride heat of formation was found to be 13.5 - 14 kcal/mole-H{sub 2}, somewhat lower than Mg{sub 2}Ni. The new fabrication method takes advantage of the high vapor transport of magnesium. It was found that Mg{sub 2}Ni produced by our low temperature process was better than conventional materials because it was single phase (no Mg phase) and could be fabricated with very small particle sizes. Hydride measurements on this material showed faster kinetic response than conventional material. The technique could potentially be applied to in-situ hydride bed fabrication with improved packing density, release kinetics, thermal properties and mechanical stability.

  20. It is presented initially: linear dislocation & inter-language strategies in Brazilian Academic abstracts in english and portuguese It is presented initially: linear dislocation & inter-language strategies in Brazilian Academic abstracts in english and portuguese

    Directory of Open Access Journals (Sweden)

    Tim Johns

    2008-04-01

    Full Text Available In Brazil, as in the rest of the world, the academic community is under pressure to publish in English so that research findings can enter the mainstream of international debate as rapidly and effectively as possible. For the same reason, it is the editorial policy of most Brazilian academic journals that all papers, whether published in Portuguese or English, should be accompanied by abstracts in both languages. If the inclusion of English abstracts is not to become a meaningless ritual, it is a matter of some importance to evaluate how well the writers of such abstracts succeed in communicating the substance of their work to their peers outside Brazil, and also to examine the linguistic features that may facilitate or interfere with that communication. Although preliminary work has been undertaken by the author on both these questions, the present paper addresses the second only, with special reference to a problem at the intersection of syntax and discourse. In Brazil, as in the rest of the world, the academic community is under pressure to publish in English so that research findings can enter the mainstream of international debate as rapidly and effectively as possible. For the same reason, it is the editorial policy of most Brazilian academic journals that all papers, whether published in Portuguese or English, should be accompanied by abstracts in both languages. If the inclusion of English abstracts is not to become a meaningless ritual, it is a matter of some importance to evaluate how well the writers of such abstracts succeed in communicating the substance of their work to their peers outside Brazil, and also to examine the linguistic features that may facilitate or interfere with that communication. Although preliminary work has been undertaken by the author on both these questions, the present paper addresses the second only, with special reference to a problem at the intersection of syntax and discourse.

  1. Synergic effects of ion irradiations (La, Ce) and alkaline pretreatment (KOH) on hydriding kinetic property of a Mm–Ni based alloy

    Energy Technology Data Exchange (ETDEWEB)

    Abe, H., E-mail: abe.hiroshi10@jaea.go.jp [Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki, Takasaki, Gunma 370-1292 (Japan); Aone, S.; Morimoto, R.; Uchida, H. [Course of Applied Science, Graduate School of Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan)

    2013-12-15

    Highlights: •Ion irradiations by various ions onto a Mm–Ni based hydrogen storage alloy. •The generation of vacancy type defects by ion irradiations in the surface of a Mm–Ni based alloy. •The enhancement of the initial rate by the ion irradiations of the Mm surface. •The enhancement of the initial rate by an alkaline treatment of the Mm surface. -- Abstract: The ion beam irradiation is known to produce a high density of vacancy type defects in the surface region of a metal and found to be an effective method as a surface modification in order to enhance the hydriding rate of a metal. In this study, we examined synergic effects of both surface modifications of ion irradiations and alkaline treatment on the initial hydriding rate of a Mm–Ni based alloy. In this study, the irradiations by lanthanum (La) and cerium (Ce) ions combined with an alkaline KOH pretreatment were found much more effective in the enhancement of the initial hydriding rate compared with irradiations with other ions. This study reports the synergic effects of the surface modifications by the both the surface irradiations with rare earth ions of La and Ce, and an alkaline surface treatment on the hydriding kinetics.

  2. Pole figure measurement of the initial growth of GaN nanoneedles on GaN/Si(111) by using hydride vapor phase epitaxy

    Science.gov (United States)

    Jeon, Injun; Lee, Ha Young; Noh, Ji-Yeon; Ahn, Hyung Soo; Yi, Sam Nyung; Jeon, Hunsoo; Shin, Min Jeong; Yu, Young Moon; Ha, Dong Han

    2016-09-01

    We report on crystallographic analyses of one-dimensional GaN nanoneedles grown on a n-GaN epilayer by using hydride vapor phase epitaxy. The nanoneedles were grown with a HCl:NH3 gas flow ratio of 1:38 at 600 °C. The growth time of the GaN nanoneedles affected their morphologies. As time progressed, GaN dots nucleated and then evolved as nanoneedles. The vertical growth rate of GaN nanoneedles was higher than the lateral growth rate under optimized growth conditions. X-ray pole figure measurements were carried out using a four-axis diffractometer. For the sample grown for 20 min, we obtained discrete patterns with six strong dots and weak dough-nut and cotton swab patterns, indicating that most of the nanoneedles were grown ideally, but partially, in the x- y plane with an azimuthal rotation angle ϕ = 15 ~ 45° rotated to the substrate, and a few GaN nanoneedles were tilted by ±4° or by more than 32° from the vertical c-axis.

  3. Results of NDE Technique Evaluation of Clad Hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Kunerth, Dennis C. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    This report fulfills the M4 milestone, M4FT-14IN0805023, Results of NDE Technique Evaluation of Clad Hydrides, under Work Package Number FT-14IN080502. During service, zirconium alloy fuel cladding will degrade via corrosion/oxidation. Hydrogen, a byproduct of the oxidation process, will be absorbed into the cladding and eventually form hydrides due to low hydrogen solubility limits. The hydride phase is detrimental to the mechanical properties of the cladding and therefore it is important to be able to detect and characterize the presence of this constituent within the cladding. Presently, hydrides are evaluated using destructive examination. If nondestructive evaluation techniques can be used to detect and characterize the hydrides, the potential exists to significantly increase test sample coverage while reducing evaluation time and cost. To demonstrate the viability this approach, an initial evaluation of eddy current and ultrasonic techniques were performed to demonstrate the basic ability to these techniques to detect hydrides or their effects on the microstructure. Conventional continuous wave eddy current techniques were applied to zirconium based cladding test samples thermally processed with hydrogen gas to promote the absorption of hydrogen and subsequent formation of hydrides. The results of the evaluation demonstrate that eddy current inspection approaches have the potential to detect both the physical damage induced by hydrides, e.g. blisters and cracking, as well as the combined effects of absorbed hydrogen and hydride precipitates on the electrical properties of the zirconium alloy. Similarly, measurements of ultrasonic wave velocities indicate changes in the elastic properties resulting from the combined effects of absorbed hydrogen and hydride precipitates as well as changes in geometry in regions of severe degradation. However, for both approaches, the signal responses intended to make the desired measurement incorporate a number of contributing

  4. Hydrogen, lithium, and lithium hydride production

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Sam W.; Spencer, Larry S.; Phillips, Michael R.; Powell, G. Louis; Campbell, Peggy J.

    2017-06-20

    A method is provided for extracting hydrogen from lithium hydride. The method includes (a) heating lithium hydride to form liquid-phase lithium hydride; (b) extracting hydrogen from the liquid-phase lithium hydride, leaving residual liquid-phase lithium metal; (c) hydriding the residual liquid-phase lithium metal to form refined lithium hydride; and repeating steps (a) and (b) on the refined lithium hydride.

  5. Hydrogen-storing hydride complexes

    Science.gov (United States)

    Srinivasan, Sesha S [Tampa, FL; Niemann, Michael U [Venice, FL; Goswami, D Yogi [Tampa, FL; Stefanakos, Elias K [Tampa, FL

    2012-04-10

    A ternary hydrogen storage system having a constant stoichiometric molar ratio of LiNH.sub.2:MgH.sub.2:LiBH.sub.4 of 2:1:1. It was found that the incorporation of MgH.sub.2 particles of approximately 10 nm to 20 nm exhibit a lower initial hydrogen release temperature of 150.degree. C. Furthermore, it is observed that the particle size of LiBNH quaternary hydride has a significant effect on the hydrogen sorption concentration with an optimum size of 28 nm. The as-synthesized hydrides exhibit two main hydrogen release temperatures, one around 160.degree. C. and the other around 300.degree. C., with the main hydrogen release temperature reduced from 310.degree. C. to 270.degree. C., while hydrogen is first reversibly released at temperatures as low as 150.degree. C. with a total hydrogen capacity of 6 wt. % to 8 wt. %. Detailed thermal, capacity, structural and microstructural properties have been demonstrated and correlated with the activation energies of these materials.

  6. Influence of climatography on rainfall thresholds for initiation of debris-flows on the California coast [abstract

    OpenAIRE

    Wilson, Raymond C.

    1996-01-01

    EXTRACT (SEE PDF FOR FULL ABSTRACT): Since 1986, the U.S. Geological Survey and National Weather Service have operated a warning system for debris flows triggered by severe rainstorms in the San Francisco Bay region. The NWS tracks storm systems as they approach the region, forecasts precipitation, and observes rainfall with a network of radiotelemetered rain gauges (ALERT). The USGS also monitors ALERT data and compares the observed and forecast rainfall to thresholds for debris-flow ini...

  7. Filiform-mode hydride corrosion of uranium surfaces

    Science.gov (United States)

    Hill, M. A.; Schulze, R. K.; Bingert, J. F.; Field, R. D.; McCabe, R. J.; Papin, P. A.

    2013-11-01

    Hydride nucleation and growth has previously been studied in uranium with an air-formed oxide. Preferred directional growth of uranium hydride has not been observed, presumably due to the constraint of the oxide layer and/or the presence of a surface layer distorted by mechanical grinding and polishing. Instead, hydrides typically first form as subsurface blisters that do not exhibit preferred growth directionality. By eliminating the strained surface layer through electropolishing, removing the natural oxide through ion sputtering, avoiding exposure of the uranium to air, and then exposing uranium to high purity hydrogen in an environmental cell, hydride growth patterns emerge that correspond to defect structures within the microstructure. These hydride growth patterns are similar to filiform corrosion, a type of corrosion that frequently forms under thin protective films. This work describes the first reported observation of filiform-like corrosion in uranium. The uranium hydride initiates at defects, but grows into filaments up to 20 μm wide, and tends to form in straight lines, largely propagating along twin boundaries. Propagation is driven by hydrogen reaction at the filament head, promoted by more efficient delivery of reactant. However, this phenomenon does not involve an electrochemical process associated with conventional filiform corrosion and is therefore described as filiform-like. Hydride growth was observed using optical microscopy for a period of nearly three years. Sample characterization included automated electron backscatter diffraction (EBSD) measurements to determine growth directions. Observation of this anomalous hydride growth provides clues as to the mechanisms operating in uranium hydriding for more conventionally prepared sample surfaces.

  8. Metal hydrides based high energy density thermal battery

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Zhigang Zak, E-mail: zak.fang@utah.edu [Department of Metallurgical Engineering, The University of Utah, 135 South 1460 East, Room 412, Salt Lake City, UT 84112-0114 (United States); Zhou, Chengshang; Fan, Peng [Department of Metallurgical Engineering, The University of Utah, 135 South 1460 East, Room 412, Salt Lake City, UT 84112-0114 (United States); Udell, Kent S. [Department of Metallurgical Engineering, The University of Utah, 50 S. Central Campus Dr., Room 2110, Salt Lake City, UT 84112-0114 (United States); Bowman, Robert C. [Department of Metallurgical Engineering, The University of Utah, 135 South 1460 East, Room 412, Salt Lake City, UT 84112-0114 (United States); Vajo, John J.; Purewal, Justin J. [HRL Laboratories, LLC, 3011 Malibu Canyon Road, Malibu, CA 90265 (United States); Kekelia, Bidzina [Department of Metallurgical Engineering, The University of Utah, 50 S. Central Campus Dr., Room 2110, Salt Lake City, UT 84112-0114 (United States)

    2015-10-05

    Highlights: • The principle of the thermal battery using advanced metal hydrides was demonstrated. • The thermal battery used MgH{sub 2} and TiMnV as a working pair. • High energy density can be achieved by the use of MgH{sub 2} to store thermal energy. - Abstract: A concept of thermal battery based on advanced metal hydrides was studied for heating and cooling of cabins in electric vehicles. The system utilized a pair of thermodynamically matched metal hydrides as energy storage media. The pair of hydrides that was identified and developed was: (1) catalyzed MgH{sub 2} as the high temperature hydride material, due to its high energy density and enhanced kinetics; and (2) TiV{sub 0.62}Mn{sub 1.5} alloy as the matching low temperature hydride. Further, a proof-of-concept prototype was built and tested, demonstrating the potential of the system as HVAC for transportation vehicles.

  9. Suppression of the critical temperature in binary vanadium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, M.D., E-mail: michael.dolan@csiro.au [CSIRO Energy Technology, 1 Technology Court, Pullenvale, QLD 4069 (Australia); McLennan, K.G. [CSIRO Energy Technology, 1 Technology Court, Pullenvale, QLD 4069 (Australia); Chandra, D. [Department of Chemical and Materials Engineering, University of Nevada, Reno, Reno, NV 89557 (United States); Kochanek, M.A. [CSIRO Energy Technology, 1 Technology Court, Pullenvale, QLD 4069 (Australia); Song, G. [CSIRO Process Science and Engineering, Gate 4, Normanby Rd, Clayton, VIC 3168 (Australia)

    2014-02-15

    Highlights: • Addition of 10 mol% Cr to V increases the β-hydride T{sub C} to >200 °C. • Addition of 10 mol% Ni to V increases the β-hydride T{sub C} to >400 °C. • Addition of 10 mol% Al to V decreases the β-hydride T{sub C} to <30 °C. • V{sub 90}Al{sub 10} membrane can be cycled to <30 °C under H{sub 2} without β-hydride formation. -- Abstract: The tendency of vanadium-based alloy membranes to embrittle is the biggest commercialisation barrier for this hydrogen separation technology. Excessive hydrogen absorption and the α → β hydride transition both contribute to brittle failure of these membranes. Alloying is known to reduce absorption, but the influence of alloying on hydride phase formation under conditions relevant to membrane operation has not been studied in great detail previously. Here, the effect of Cr, Ni, and Al alloying additions on V–H phase equilibrium has been studied using hydrogen absorption measurements and in situ X-ray diffraction studies. The addition of 10 mol% Ni increases the critical temperature for α + β hydride formation to greater than 400 °C, compared to 170 °C for V. Cr also increases the critical temperature, to between 200 and 300 °C. The addition of 10 mol% Al, however, suppresses the critical temperature to less than 30 °C, thereby enabling this material to be cycled thermally and hydrostatically while precluding formation of the β-hydride phase. This is despite Al also decreasing hydrogen absorption. The implication of this finding is that one of the mechanisms of brittle failure in vanadium-based hydrogen-selective membranes has been eliminated, thereby increasing the robustness of this material relative to V.

  10. NUMERICAL ANALYSIS FOR HYDRIDING IN METAL HYDRIDE HYDROGEN STORAGE TANK%金属氢化物储氢器吸氢过程的数值分析

    Institute of Scientific and Technical Information of China (English)

    叶建华; 蒋利军; 李志念; 刘晓鹏; 王树茂

    2011-01-01

    Based on the principle of hydride adsorption, a one-dimensional mathematical model for hydriding in a cylindrical metal hydride hydrogen storage tank was established. The heat and mass transfer of metal hydride beds was computed by finite difference method. The variation in temperature and hydrogen concentration at different radial positions of the hydride layer was analyzed during the process of hydriding. The effects of supply pressure, heat convection coefficient and hydride layer radial thickness on the hydriding was studied. It is shown that hydride formation initially takes place uniformly all over the metal hydride layer, but with the process of hydriding, the hydriding rate at the core region is gradually slower than one at surface region. The increase of supply pressure and heat convection coefficient can accelerate the hydriding of the hydrogen storage tank. The effect of hydride layer radial thickness is significant on the hydriding rate, and the thinner hydride layer, the higher the hydriding rate.%基于金属氢化物吸氢基本特性,建立圆柱形金属氢化物储氢器吸氢过程的-维数学物理模型.采用有限差分法对金属氢化物床体的传热传质进行计算.分别研究金属氢化物床体各处温度和氢含量在吸氢过程中的变化以及氢气压力、对流传热系数和金属氢化物床体径向厚度对金属氢化物吸氢过程的影响.计算结果表明:初始阶段金属氢化物床均匀吸氢,但随着氢化过程的进行,其中心区域的吸氢速率逐渐低于边缘区域;增加吸氢压力、提高对流传热系数均可促进储氢器的吸氢;金属氢化物床的径向厚度对吸氢速率影响很大,金属氢化物床越薄,氢化反应的速度越快.

  11. High ramp rate thermogravimetric analysis of zirconium(II) hydride and titanium(II) hydride

    Energy Technology Data Exchange (ETDEWEB)

    Licavoli, Joseph J., E-mail: jjlicavo@mtu.edu; Sanders, Paul G., E-mail: sanders@mtu.edu

    2015-09-20

    Highlights: • A unique arc image device has been proposed for high ramp rate thermogravimetry. • Powder oxidation influences decomposition kinetics at temperatures below 933 K. • Particle size has a negligible effect on TiH{sub 2} decomposition behavior. • Improvements to the device are required to conduct accurate kinetic analysis. - Abstract: Zirconium and titanium hydride are utilized in liquid phase metal foam processing techniques. This application results in immediate exposure to molten metal and almost immediate decomposition at high temperatures. Most decomposition characterization techniques utilize slow heating rates and are unable to capture the decomposition behavior of hydrides under foam processing conditions. In order to address this issue a specialized high ramp rate thermogravimetric analyzer was created from a xenon arc image refiner. In addition to thermogravimetry, complimentary techniques including X-ray diffraction and scanning electron microscopy were used to characterize hydride decomposition and compare the results to literature. Hydrides were partially oxidized and separated into particles size ranges to evaluate the influence of these factors on decomposition. Oxidizing treatments were found to decrease decomposition rate only at temperatures below 933 K (660 °C) while particle size effects appeared to be negligible. Several improvements to the unique TGA apparatus presented in the current work are suggested to allow reliable kinetic modeling and analysis.

  12. Out-of-pile accelerated hydriding of Zircaloy fasteners

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, J.C.

    1979-10-01

    Mechanical joints between Zircaloy and nickel-bearing alloys, mainly the Zircaloy-4/Inconel-600 combination, were exposed to water at 450/sup 0/F and 520/sup 0/F to study hydriding of Zircaloy in contact with a dissimilar metal. Accelerated hydriding of the Zircaloy occurred at both temperatures. At 450/sup 0/F the dissolved hydrogen level of the water was over ten times that at 520/sup 0/F. At 520/sup 0/F the initially high hydrogen ingress rate decreased rapidly as exposure time increased and was effectively shut off in about 25 days. Severely hydrided Zircaloy components successfully withstood thermal cycling and mechanical testing. Chromium plating of the nickel-bearing parts was found to be an effective and practical barrier in preventing nickel-alloy smearing and accelerated hydriding of Zircaloy.

  13. Air and metal hydride battery

    Energy Technology Data Exchange (ETDEWEB)

    Lampinen, M.; Noponen, T. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Applied Thermodynamics

    1998-12-31

    The main goal of the air and metal hydride battery project was to enhance the performance and manufacturing technology of both electrodes to such a degree that an air-metal hydride battery could become a commercially and technically competitive power source for electric vehicles. By the end of the project it was possible to demonstrate the very first prototype of the air-metal hydride battery at EV scale, achieving all the required design parameters. (orig.)

  14. Hydrogen Outgassing from Lithium Hydride

    Energy Technology Data Exchange (ETDEWEB)

    Dinh, L N; Schildbach, M A; Smith, R A; Balazs1, B; McLean II, W

    2006-04-20

    Lithium hydride is a nuclear material with a great affinity for moisture. As a result of exposure to water vapor during machining, transportation, storage and assembly, a corrosion layer (oxide and/or hydroxide) always forms on the surface of lithium hydride resulting in the release of hydrogen gas. Thermodynamically, lithium hydride, lithium oxide and lithium hydroxide are all stable. However, lithium hydroxides formed near the lithium hydride substrate (interface hydroxide) and near the sample/vacuum interface (surface hydroxide) are much less thermally stable than their bulk counterpart. In a dry environment, the interface/surface hydroxides slowly degenerate over many years/decades at room temperature into lithium oxide, releasing water vapor and ultimately hydrogen gas through reaction of the water vapor with the lithium hydride substrate. This outgassing can potentially cause metal hydriding and/or compatibility issues elsewhere in the device. In this chapter, the morphology and the chemistry of the corrosion layer grown on lithium hydride (and in some cases, its isotopic cousin, lithium deuteride) as a result of exposure to moisture are investigated. The hydrogen outgassing processes associated with the formation and subsequent degeneration of this corrosion layer are described. Experimental techniques to measure the hydrogen outgassing kinetics from lithium hydride and methods employing the measured kinetics to predict hydrogen outgassing as a function of time and temperature are presented. Finally, practical procedures to mitigate the problem of hydrogen outgassing from lithium hydride are discussed.

  15. Inventory Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    C. Leigh

    2000-11-03

    The purpose of the inventory abstraction as directed by the development plan (CRWMS M&O 1999b) is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M&O 1999c, 1999d). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) (NRC 1999) key technical issue (KTI): ''The rate at which radionuclides in SNF [Spent Nuclear Fuel] are released from the EBS [Engineered Barrier System] through the oxidation and dissolution of spent fuel'' (Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release to the accessible environment. The inventory abstraction is important in

  16. INVENTORY ABSTRACTION

    Energy Technology Data Exchange (ETDEWEB)

    G. Ragan

    2001-12-19

    The purpose of the inventory abstraction, which has been prepared in accordance with a technical work plan (CRWMS M&O 2000e for ICN 02 of the present analysis, and BSC 2001e for ICN 03 of the present analysis), is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M&O 2000c, 2000f). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) key technical issue (KTI): ''The rate at which radionuclides in SNF [spent nuclear fuel] are released from the EBS [engineered barrier system] through the oxidation and dissolution of spent fuel'' (NRC 1999, Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest

  17. An initial abstraction and constant loss model, and methods for estimating unit hydrographs, peak streamflows, and flood volumes for urban basins in Missouri

    Science.gov (United States)

    Huizinga, Richard J.

    2014-01-01

    Streamflow data, basin characteristics, and rainfall data from 39 streamflow-gaging stations for urban areas in and adjacent to Missouri were used by the U.S. Geological Survey in cooperation with the Metropolitan Sewer District of St. Louis to develop an initial abstraction and constant loss model (a time-distributed basin-loss model) and a gamma unit hydrograph (GUH) for urban areas in Missouri. Study-specific methods to determine peak streamflow and flood volume for a given rainfall event also were developed.

  18. Experimental comparison on heat transfer-enhancing component of metal hydride bed

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyun-goo, E-mail: hgkang@nfri.re.kr; Chung, Dong-you; Oh, Yun Hee; Chang, Min Ho; Yun, Sei-Hun

    2016-11-01

    Highlights: • Two small ZrCo metal hydride beds were developed. • Copper foam or fin as heat transfer-enhancing component are experimentally compared. • Copper foam bed is more efficient for uniform and rapid heating of metal hydride. • Copper foam bed is more efficient in removal of reaction heat during absorption. - Abstract: Metal hydride bed will be one of the key components for safe handling of tritium in fusion fuel cycle. In case of normal or emergency shutdown of fuel cycle, metal hydride bed installed in storage and delivery system (SDS) of tritium plant will absorb tritium gas in the system as soon as possible. Supply of hydrogen isotope gas to fueling system of fusion reactor will start from the metal hydride beds. Rapid delivery, rapid recovery including rapid heating and cooling are key issues. For better performance of metal hydride bed, various forms of heat transfer enhancing component or design can be applied. This study aims to help the selection of heat transfer enhancing component. Two small ZrCo beds with copper foam and copper fin were developed and experimented with hydrogen gas. Recovery and delivery performance, heating and cooling performance are compared. Experimental results show metal hydride bed with copper foam has improved performance. Uniform heating of metal hydride during desorption and removal of reaction heat during absorption are more efficient with copper foam bed than copper fin bed.

  19. Metal Hydride Compression

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Terry A. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Bowman, Robert [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Barton [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Anovitz, Lawrence [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jensen, Craig [Hawaii Hydrogen Carriers LLC, Honolulu, HI (United States)

    2017-07-01

    Conventional hydrogen compressors often contribute over half of the cost of hydrogen stations, have poor reliability, and have insufficient flow rates for a mature FCEV market. Fatigue associated with their moving parts including cracking of diaphragms and failure of seal leads to failure in conventional compressors, which is exacerbated by the repeated starts and stops expected at fueling stations. Furthermore, the conventional lubrication of these compressors with oil is generally unacceptable at fueling stations due to potential fuel contamination. Metal hydride (MH) technology offers a very good alternative to both conventional (mechanical) and newly developed (electrochemical, ionic liquid pistons) methods of hydrogen compression. Advantages of MH compression include simplicity in design and operation, absence of moving parts, compactness, safety and reliability, and the possibility to utilize waste industrial heat to power the compressor. Beyond conventional H2 supplies of pipelines or tanker trucks, another attractive scenario is the on-site generating, pressuring and delivering pure H2 at pressure (≥ 875 bar) for refueling vehicles at electrolysis, wind, or solar generating production facilities in distributed locations that are too remote or widely distributed for cost effective bulk transport. MH hydrogen compression utilizes a reversible heat-driven interaction of a hydride-forming metal alloy with hydrogen gas to form the MH phase and is a promising process for hydrogen energy applications [1,2]. To deliver hydrogen continuously, each stage of the compressor must consist of multiple MH beds with synchronized hydrogenation & dehydrogenation cycles. Multistage pressurization allows achievement of greater compression ratios using reduced temperature swings compared to single stage compressors. The objectives of this project are to investigate and demonstrate on a laboratory scale a two-stage MH hydrogen (H2) gas compressor with a

  20. Hydride encapsulation by molecular alkali-metal clusters.

    Science.gov (United States)

    Haywood, Joanna; Wheatley, Andrew E H

    2008-07-14

    The sequential treatment of group 12 and 13 Lewis acids with alkali-metal organometallics is well established to yield so-called ''ate' complexes, whereby the Lewis-acid metal undergoes nucleophilic attack to give an anion, at least one group 1 metal acting to counter this charge. However, an alternative, less well recognised, reaction pathway involves the Lewis acid abstracting hydride from the organolithium reagent via a beta-elimination mechanism. It has recently been shown that in the presence of N,N'-bidentate ligands this chemistry can be harnessed to yield a new type of molecular main-group metal cluster in which the abstracted LiH is effectively trapped, with the hydride ion occupying an interstitial site in the cluster core. Discussion focuses on the development of this field, detailing advances in our understanding of the roles of Lewis acid, organolithium, and amine substrates in the syntheses of these compounds. Structure-types are discussed, as are efforts to manipulate cluster geometry and composition as well as hydride-coordination. Embryonic mechanistic studies are reported, as well as attempts to generate hydride-encapsulation clusters under catalytic control.

  1. Erbium hydride decomposition kinetics.

    Energy Technology Data Exchange (ETDEWEB)

    Ferrizz, Robert Matthew

    2006-11-01

    Thermal desorption spectroscopy (TDS) is used to study the decomposition kinetics of erbium hydride thin films. The TDS results presented in this report are analyzed quantitatively using Redhead's method to yield kinetic parameters (E{sub A} {approx} 54.2 kcal/mol), which are then utilized to predict hydrogen outgassing in vacuum for a variety of thermal treatments. Interestingly, it was found that the activation energy for desorption can vary by more than 7 kcal/mol (0.30 eV) for seemingly similar samples. In addition, small amounts of less-stable hydrogen were observed for all erbium dihydride films. A detailed explanation of several approaches for analyzing thermal desorption spectra to obtain kinetic information is included as an appendix.

  2. Hydride development for hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, G.J.; Guthrie, S.E.; Bauer, W.; Yang, N.Y.C. [Sandia National Lab., Livermore, CA (United States); Sandrock, G. [SunaTech, Inc., Ringwood, NJ (United States)

    1996-10-01

    The purpose of this project is to develop and demonstrate improved hydride materials for hydrogen storage. The work currently is organized into four tasks: hydride development, bed fabrication, materials support for engineering systems, and IEA Annex 12 activities. At the present time, hydride development is focused on Mg alloys. These materials generally have higher weight densities for storing hydrogen than rare earth or transition metal alloys, but suffer from high operating temperatures, slow kinetic behavior and material stability. The authors approach is to study bulk alloy additions which increase equilibrium overpressure, in combination with stable surface alloy modification and particle size control to improve kinetic properties. This work attempts to build on the considerable previous research in this area, but examines specific alloy systems in greater detail, with attention to known phase properties and structures. The authors have found that specific phases can be produced which have significantly improved hydride properties compared to previous studies.

  3. Metal hydride air conditioner

    Institute of Scientific and Technical Information of China (English)

    YANG; Ke; DU; Ping; LU; Man-qi

    2005-01-01

    The relationship among the hydrogen storage properties, cycling characteristics and thermal parameters of the metal hydride air conditioning systems was investigated. Based on a new alloy selection model, three pairs of hydrogen storage alloys, LaNi4.4 Mn0.26 Al0.34 / La0.6 Nd0.4 Ni4.8 Mn0.2 Cu0. 1, LaNi4.61Mn0. 26 Al0.13/La0.6 Nd0.4 Ni4.8 Mn0.2 Cu0. 1 and LaNi4.61 Mn0.26 Al0.13/La0.6 Y0.4 Ni4.8 Mn0. 2, were selected as the working materials for the metal hydride air conditioning system. Studies on the factors affecting the COP of the system showed that higher COP and available hydrogen content need the proper operating temperature and cycling time,large hydrogen storage capacity, flat plateau and small hysterisis of hydrogen alloys, proper original input hydrogen content and mass ratio of the pair of alloys. It also needs small conditioning system was established by using LaNi4.61 Mn0.26 Al0. 13/La0.6 Y0.4 Ni4.8 Mn0.2 alloys as the working materials, which showed that under the operating temperature of 180℃/40℃, a low temperature of 13℃ was reached, with COP =0.38 and Wnet =0.09 kW/kg.

  4. Geoneutrino and Hydridic Earth model

    CERN Document Server

    Bezrukov, Leonid

    2013-01-01

    Uranium, Thorium and Potassium-40 abundances in the Earth were calculated in the frame of Hydridic Earth model. Terrestrial heat producton from U, Th and K40 decays was calculated also. We must admit the existance of Earth expansion process to understand the obtained large value of terrestrial heat producton. The geoneutrino detector with volume more than 5 kT (LENA type) must be constructed to definitely separate between Bulk Silicat Earth model and Hydridic Earth model.

  5. Nanostructured Magnesium Hydride for Reversible Hydrogen Storage

    Science.gov (United States)

    de Rango, P.; Chaise, A.; Fruchart, D.; Miraglia, S.; Marty, Ph.

    2013-05-01

    The aim of this work was to develop suitable materials to store hydrogen in a solid state. A systematic investigation of the co-milling process of magnesium hydride with a transition metal was undertaken in order to produce nanostructured and highly reactive powders. The initiating role of the transition metal was evidenced by in situ neutron diffraction experiments. High performances in terms of thermal and mechanical behavior were achieved introducing expanded graphite and compacting the mixture to form composite materials. Absorption and desorption kinetics have been measured versus temperature and H2 pressure.

  6. Physics of hydride fueled PWR

    Science.gov (United States)

    Ganda, Francesco

    The first part of the work presents the neutronic results of a detailed and comprehensive study of the feasibility of using hydride fuel in pressurized water reactors (PWR). The primary hydride fuel examined is U-ZrH1.6 having 45w/o uranium: two acceptable design approaches were identified: (1) use of erbium as a burnable poison; (2) replacement of a fraction of the ZrH1.6 by thorium hydride along with addition of some IFBA. The replacement of 25 v/o of ZrH 1.6 by ThH2 along with use of IFBA was identified as the preferred design approach as it gives a slight cycle length gain whereas use of erbium burnable poison results in a cycle length penalty. The feasibility of a single recycling plutonium in PWR in the form of U-PuH2-ZrH1.6 has also been assessed. This fuel was found superior to MOX in terms of the TRU fractional transmutation---53% for U-PuH2-ZrH1.6 versus 29% for MOX---and proliferation resistance. A thorough investigation of physics characteristics of hydride fuels has been performed to understand the reasons of the trends in the reactivity coefficients. The second part of this work assessed the feasibility of multi-recycling plutonium in PWR using hydride fuel. It was found that the fertile-free hydride fuel PuH2-ZrH1.6, enables multi-recycling of Pu in PWR an unlimited number of times. This unique feature of hydride fuels is due to the incorporation of a significant fraction of the hydrogen moderator in the fuel, thereby mitigating the effect of spectrum hardening due to coolant voiding accidents. An equivalent oxide fuel PuO2-ZrO2 was investigated as well and found to enable up to 10 recycles. The feasibility of recycling Pu and all the TRU using hydride fuels were investigated as well. It was found that hydride fuels allow recycling of Pu+Np at least 6 times. If it was desired to recycle all the TRU in PWR using hydrides, the number of possible recycles is limited to 3; the limit is imposed by positive large void reactivity feedback.

  7. Synthesis, properties and Moessbauer study of ZrFe{sub 2-x}Ni{sub x} hydrides (x = 0.2-0.8)

    Energy Technology Data Exchange (ETDEWEB)

    Sivov, Roman B., E-mail: rsivov@mail.ru [Department of Material Science, Lomonosov Moscow State University, Leninskie Gory 3, Moscow 119991 (Russian Federation); Zotov, Timur A., E-mail: tim.zotov@gmail.com [Chemistry Department, Lomonosov Moscow State University, Leninskie Gory 3, Moscow 119991 (Russian Federation); Verbetsky, Victor N.; Filimonov, Dmitry S.; Pokholok, Konstantin V. [Chemistry Department, Lomonosov Moscow State University, Leninskie Gory 3, Moscow 119991 (Russian Federation)

    2011-09-15

    Research highlights: > ZrFe{sub 2-x}Ni{sub x} (x = 0.2, 0.4, 0.6, and 0.8) can accumulate up to 1.7-1.8 wt.% H{sub 2} at 295 K. > H{sub 2} desorption pressures at 295 K decreased from 325 (x = 0) to 115 atm (x = 0.8). > Isomer shifts (IS) remain constant with Ni content. > Absorption of H{sub 2} results in increase in IS and hyperfine fields for all samples. > Hydride decomposition process involves formation of intermediate hydride phase. - Abstract: Interaction of ZrFe{sub 2-x}Ni{sub x} (x = 0.2, 0.4, 0.6, and 0.8) pseudobinary intermetallic compounds with hydrogen was studied. It was found that these compounds can accumulate up to 1.7-1.8 wt.% H{sub 2} at room temperature. For all investigated ZrFe{sub 2-x}Ni{sub x}-H{sub 2} systems, thermodynamic functions of the {beta}-hydride {yields} {alpha}-solution phase transition and changes of metal matrix volume during formation of hydrides were calculated. It was shown that increase in Ni content leads to reduction of both desorption pressures and starting pressures of reaction with hydrogen in the first hydrogenation cycle compared to ZrFe{sub 2}. Moessbauer investigations, which have been carried out for all alloys as well as hydrides, revealed that Curie temperatures (T{sub c}) and average hyperfine fields (HF{sub av}) of initial alloys decrease with Ni content increase, while isomer shifts (IS) remain constant. Absorption of H{sub 2} results in significant increase in IS together with some increase in T{sub c} and HF{sub av} for all samples. The decomposition of the hydride phases to intermetallic phases while heating from 78 K to room temperature was found to be a two-step process involving formation of the hydride phases with intermediate hydrogen content.

  8. The effect of stress state on zirconium hydride reorientation

    Science.gov (United States)

    Cinbiz, Mahmut Nedim

    Prior to storage in a dry-cask facility, spent nuclear fuel must undergo a vacuum drying cycle during which the spent fuel rods are heated up to elevated temperatures of ≤ 400°C to remove moisture the canisters within the cask. As temperature increases during heating, some of the hydride particles within the cladding dissolve while the internal gas pressure in fuel rods increases generating multi-axial hoop and axial stresses in the closed-end thin-walled cladding tubes. As cool-down starts, the hydrogen in solid solution precipitates as hydride platelets, and if the multiaxial stresses are sufficiently large, the precipitating hydrides reorient from their initial circumferential orientation to radial orientation. Radial hydrides can severely embrittle the spent nuclear fuel cladding at low temperature in response to hoop stress loading. Because the cladding can experience a range of stress states during the thermo-mechanical treatment induced during vacuum drying, this study has investigated the effect of stress state on the process of hydride reorientation during controlled thermo-mechanical treatments utilizing the combination of in situ X-ray diffraction and novel mechanical testing analyzed by the combination of metallography and finite element analysis. The study used cold worked and stress relieved Zircaloy-4 sheet containing approx. 180 wt. ppm hydrogen as its material basis. The failure behavior of this material containing radial hydrides was also studied over a range of temperatures. Finally, samples from reactor-irradiated cladding tubes were examined by X-ray diffraction using synchrotron radiation. To reveal the stress state effect on hydride reorientation, the critical threshold stress to reorient hydrides was determined by designing novel mechanical test samples which produce a range of stress states from uniaxial to "near-equibiaxial" tension when a load is applied. The threshold stress was determined after thermo-mechanical treatments by

  9. A New Reducing Regent: Dichloroindium Hydride

    Institute of Scientific and Technical Information of China (English)

    A. BABA; I. SHIBATA; N. HAYASHI

    2005-01-01

    @@ 1Introduction Among the hydride derivatives of group 13 elements, various types of aluminum hydrides and boron hydrides have been employed as powerful reduction tools. Indium hydrides have not received much attention,whereas the synthesis of indium trihydride (InH3) was reported several decades ago[1]. There have been no precedents for monometallic indium hydrides having practical reactivity, while activated hydrides such as an ate complex LiPhn InH4-n (n = 0- 2) and phosphine-coordinated indium hydrides readily reduce carbonyl compounds. In view of this background, we focused on the development of dichloroindium hydrides (Cl2InH) as novel reducing agents that bear characteristic features in both ionic and radical reactions.

  10. Hydride Olefin complexes of tantalum and niobium

    NARCIS (Netherlands)

    Klazinga, Aan Hendrik

    1979-01-01

    This thesis describes investigations on low-valent tantalum and niobium hydride and alkyl complexes, particularly the dicyclopentadienyl tantalum hydride olefin complexes Cp2Ta(H)L (L=olefin). ... Zie: Summary

  11. Complex and liquid hydrides for energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Callini, Elsa; Atakli, Zuleyha Özlem Kocabas; Hauback, Bjørn C.; Orimo, Shin-ichi; Jensen, Craig; Dornheim, Martin; Grant, David; Cho, Young Whan; Chen, Ping; Hjörvarsson, Bjørgvin; de Jongh, Petra; Weidenthaler, Claudia; Baricco, Marcello; Paskevicius, Mark; Jensen, Torben R.; Bowden, Mark E.; Autrey, Thomas S.; Züttel, Andreas

    2016-03-10

    The research on complex hydrides for hydrogen storage was imitated by the discovery of Ti as a hydrogen sorption catalyst in NaAlH4 by Boris Bogdanovic in 1996. A large number of new complex hydride materials in various forms and combinations have been synthesized and characterized and the knowledge on the properties of complex hydrides and the synthesis methods has grown enormously since then. A significant part of the research groups active in the field of complex hydrides are collaborators in the IEA task 32. This paper reports about the important issues in the field of the complex hydride research, i.e. the synthesis of borohydrides, the thermodynamics of complex hydrides and their thermodynamic properties, the effects of size and confinement, the hydrogen sorption mechanism and the complex hydride composites as well as the properties of liquid complex hydrides. This paper is the result of the collaboration of several groups and excellent summary of the recent achievements.

  12. Metal hydride hydrogen and heat storage systems as enabling technology for spacecraft applications

    Energy Technology Data Exchange (ETDEWEB)

    Reissner, Alexander, E-mail: reissner@fotec.at [FOTEC Forschungs- und Technologietransfer GmbH, Viktor Kaplan Straße 2, 2700 Wiener Neustadt (Austria); University of Applied Sciences Wiener Neustadt, Johannes Gutenberg-Straße 3, 2700 Wiener Neustadt (Austria); Pawelke, Roland H.; Hummel, Stefan; Cabelka, Dusan [FOTEC Forschungs- und Technologietransfer GmbH, Viktor Kaplan Straße 2, 2700 Wiener Neustadt (Austria); Gerger, Joachim [University of Applied Sciences Wiener Neustadt, Johannes Gutenberg-Straße 3, 2700 Wiener Neustadt (Austria); Farnes, Jarle, E-mail: Jarle.farnes@prototech.no [CMR Prototech AS, Fantoftvegen 38, PO Box 6034, 5892 Bergen (Norway); Vik, Arild; Wernhus, Ivar; Svendsen, Tjalve [CMR Prototech AS, Fantoftvegen 38, PO Box 6034, 5892 Bergen (Norway); Schautz, Max, E-mail: max.schautz@esa.int [European Space Agency, ESTEC – Keplerlaan 1, 2201 AZ Noordwijk Zh (Netherlands); Geneste, Xavier, E-mail: xavier.geneste@esa.int [European Space Agency, ESTEC – Keplerlaan 1, 2201 AZ Noordwijk Zh (Netherlands)

    2015-10-05

    Highlights: • A metal hydride tank concept for heat and hydrogen storage is presented. • The tank is part of a closed-loop reversible fuel cell system for space application. • For several engineering issues specific to the spacecraft application, solutions have been developed. • The effect of water contamination has been approximated for Ti-doped NaAlH{sub 4}. • A novel heat exchanger design has been realized by Selective Laser Melting. - Abstract: The next generation of telecommunication satellites will demand a platform payload performance in the range of 30+ kW within the next 10 years. At this high power output, a Regenerative Fuel Cell Systems (RFCS) offers an efficiency advantage in specific energy density over lithium ion batteries. However, a RFCS creates a substantial amount of heat (60–70 kJ per mol H{sub 2}) during fuel cell operation. This requires a thermal hardware that accounts for up to 50% of RFCS mass budget. Thus the initial advantage in specific energy density is reduced. A metal hydride tank for combined storage of heat and hydrogen in a RFCS may overcome this constraint. Being part of a consortium in an ongoing European Space Agency project, FOTEC is building a technology demonstrator for such a combined hydrogen and heat storage system.

  13. Computational Abstraction Steps

    DEFF Research Database (Denmark)

    Thomsen, Lone Leth; Thomsen, Bent; Nørmark, Kurt

    2010-01-01

    and class instantiations. Our teaching experience shows that many novice programmers find it difficult to write programs with abstractions that materialise to concrete objects later in the development process. The contribution of this paper is the idea of initiating a programming process by creating......In this paper we discuss computational abstraction steps as a way to create class abstractions from concrete objects, and from examples. Computational abstraction steps are regarded as symmetric counterparts to computational concretisation steps, which are well-known in terms of function calls...

  14. Luminescent properties of aluminum hydride

    Energy Technology Data Exchange (ETDEWEB)

    Baraban, A.P.; Gabis, I.E.; Dmitriev, V.A. [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation); Dobrotvorskii, M.A., E-mail: mstislavd@gmail.com [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation); Kuznetsov, V.G. [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation); Matveeva, O.P. [National Mineral Resources University, Saint Petersburg 199106 (Russian Federation); Titov, S.A. [Petersburg State University of Railway Transport, Saint-Petersburg 190031 (Russian Federation); Voyt, A.P.; Elets, D.I. [Saint-Petersburg State University, Department of Physics, Saint-Petersburg 198504 (Russian Federation)

    2015-10-15

    We studied cathodoluminescence and photoluminescence of α-AlH{sub 3}– a likely candidate for use as possible hydrogen carrier in hydrogen-fueled vehicles. Luminescence properties of original α-AlH{sub 3} and α-AlH{sub 3} irradiated with ultraviolet were compared. The latter procedure leads to activation of thermal decomposition of α-AlH{sub 3} and thus has a practical implementation. We showed that the original and UV-modified aluminum hydride contain luminescence centers ‐ structural defects of the same type, presumably hydrogen vacancies, characterized by a single set of characteristic bands of radiation. The observed luminescence is the result of radiative intracenter relaxation of the luminescence center (hydrogen vacancy) excited by electrons or photons, and its intensity is defined by the concentration of vacancies, and the area of their possible excitation. UV-activation of the dehydrogenation process of aluminum hydride leads to changes in the spatial distribution of the luminescence centers. For short times of exposure their concentration increases mainly in the surface regions of the crystals. At high exposures, this process extends to the bulk of the aluminum hydride and ends with a decrease in concentration of luminescence centers in the surface region. - Highlights: • Aluminum hydride contains hydrogen vacancies which serve as luminescence centers. • The luminescence is the result of radiative relaxation of excited centers. • Hydride UV-irradiation alters distribution and concentration of luminescence centers.

  15. Photochemistry of Transition Metal Hydrides.

    Science.gov (United States)

    Perutz, Robin N; Procacci, Barbara

    2016-08-10

    Photochemical reactivity associated with metal-hydrogen bonds is widespread among metal hydride complexes and has played a critical part in opening up C-H bond activation. It has been exploited to design different types of photocatalytic reactions and to obtain NMR spectra of dilute solutions with a single pulse of an NMR spectrometer. Because photolysis can be performed on fast time scales and at low temperature, metal-hydride photochemistry has enabled determination of the molecular structure and rates of reaction of highly reactive intermediates. We identify five characteristic photoprocesses of metal monohydride complexes associated with the M-H bond, of which the most widespread are M-H homolysis and R-H reductive elimination. For metal dihydride complexes, the dominant photoprocess is reductive elimination of H2. Dihydrogen complexes typically lose H2 photochemically. The majority of photochemical reactions are likely to be dissociative, but hydride complexes may be designed with equilibrated excited states that undergo different photochemical reactions, including proton transfer or hydride transfer. The photochemical mechanisms of a few reactions have been analyzed by computational methods, including quantum dynamics. A section on specialist methods (time-resolved spectroscopy, matrix isolation, NMR, and computational methods) and a survey of transition metal hydride photochemistry organized by transition metal group complete the Review.

  16. Examination of parameters affecting overload fracture behavior of flaw-tip hydrides in Zr-2.5Nb pressure tubes in Candu reactors

    Energy Technology Data Exchange (ETDEWEB)

    Cui, J.; Shek, G.K. [Kinectrics Inc., Toronto, Ontario (Canada); Wang, Z.R. [Toronto Univ., Dept. of Materials Science and Engineering, Toronto, Ontario (Canada)

    2007-07-01

    Service-induced flaws in Zr-2.5Nb alloy pressure tubes in Candu (Canada Deuterium Uranium Reactors) nuclear reactors are susceptible to a crack initiation and growth mechanism known as Delayed Hydride Cracking (DHC), which is a repetitive process that involves hydrogen diffusion, hydride precipitation, growth and fracture of a hydride region at the flaw-tip under a constant load. Crack initiation may also occur under another loading condition when the hydride region is subjected to an overload. An overload occurs when the hydride region at the flaw tip is loaded to a stress higher than that at which this region is formed such as when the reactor experiences a transient pressure higher than the normal operating pressure where the hydride region is formed. Flaw disposition requires justification that the hydride region overload will not fracture the hydride region, and initiate DHC. In this work, monotonically increasing load experiments were performed on unirradiated Zr-2.5Nb pressure tube specimens containing simulated debris frets (V-notch) and bearing pad frets (BPF, U-shape notch) to examine overload fracture behavior of flaw-tip hydrides formed under hydride ratcheting conditions. Hydride cracking in the overload tests was detected by the acoustic emission technique and confirmed by post-test metallurgical examination. Test results indicate that the resistance to overload fracture is affected by a number of parameters including hydride formation stress, flaw shape (V-notch vs. BPF) and flaw radius (0.015 mm vs. 0.1 mm). The notch-tip hydride morphologies were examined by optical microscopy and scanning electron microscopy (SEM) which show that they are affected by the hydride formation conditions, resulting in different overload fracture resistance. Finite element stress analyses were also performed to obtain flaw-tip stress distributions for interpretation of the test results. (authors)

  17. Method of producing a chemical hydride

    Science.gov (United States)

    Klingler, Kerry M.; Zollinger, William T.; Wilding, Bruce M.; Bingham, Dennis N.; Wendt, Kraig M.

    2007-11-13

    A method of producing a chemical hydride is described and which includes selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of a hydrocarbon; and reacting the composition with the source of the hydrocarbon to generate a chemical hydride.

  18. Hydrogen, lithium, and lithium hydride production

    Science.gov (United States)

    Brown, Sam W; Spencer, Larry S; Phillips, Michael R; Powell, G. Louis; Campbell, Peggy J

    2014-03-25

    A method of producing high purity lithium metal is provided, where gaseous-phase lithium metal is extracted from lithium hydride and condensed to form solid high purity lithium metal. The high purity lithium metal may be hydrided to provide high purity lithium hydride.

  19. Anodematerials for Metal Hydride Batteries

    DEFF Research Database (Denmark)

    Jensen, Jens Oluf

    1997-01-01

    This report describes the work on development of hydride forming alloys for use as electrode materials in metal hydride batteries. The work has primarily been concentrated on calcium based alloys derived from the compound CaNi5. This compound has a higher capacity compared with alloys used in today......’s hydride batteries, but a much poorer stability towards repeated charge/discharge cycling. The aim was to see if the cycleability of CaNi5 could be enhanced enough by modifications to make the compound a suitable electrode material. An alloying method based on mechanical alloying in a planetary ball mill...... by annealing at 700°C for 12 hours. The alloys appeared to be nanocrystalline with an average crystallite size around 10 nm before annealing. Special steel containers was developed for the annealing of the metal powders in inert atmosphere. The use of various annealing temperatures was investigated...

  20. Selected Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Three - Stage Interaction Model of Lexicon - Syntax Interface Liu Yuhong (80) The Three -Stage Interaction Model maintains that the interactions at the lexicon -syntax interface are divisible into three levels, namely, the interaction between lexical meaning and lexical grammar that determines syntactic items, the interaction among lexical items that determines syntactic structure, and the interaction between abstract syntactic structure (i. e. construction) and temporary syntactic combinations that determines and coerces grammaticality of the latter. The Three - Stage Interaction Model is hierarchical, complete and bidirectional in language comprehension. It also testifies to the varying abstractness between grammar (syntax) and semantics, and between the five grammatical cases. According to this model, temporary syntactic combination is sanctioned by abstract syntactic structure, therefore the conventional linguistic significance of P600 is maintained without coining contradictory new terms.

  1. Abstract algebra

    CERN Document Server

    Garrett, Paul B

    2007-01-01

    Designed for an advanced undergraduate- or graduate-level course, Abstract Algebra provides an example-oriented, less heavily symbolic approach to abstract algebra. The text emphasizes specifics such as basic number theory, polynomials, finite fields, as well as linear and multilinear algebra. This classroom-tested, how-to manual takes a more narrative approach than the stiff formalism of many other textbooks, presenting coherent storylines to convey crucial ideas in a student-friendly, accessible manner. An unusual feature of the text is the systematic characterization of objects by universal

  2. Hydrogen Storage in Metal Hydrides

    Science.gov (United States)

    1990-08-01

    Hydrogen Storage Capacity Hydride by weight (%) [1) by volume (g/ml) [2] MgH2 7.00 0.101 Mg2NiH4 3.84 0,081 Mg2CuH4 2.04 - - 27 ...Include Security Classification) Hydrogen Storage in Metal Hydrides (U) 12. PERSONAL AUTHOR(S) DelaRosa, Mark J. 13a. TYPE OF REPORT 13b. TIME...objective of this program was to develop an economical process for pr-ducing a lightweight hydrogen storage medium by the chemical vapor infiltration

  3. Crystallography of shear transformations in zirconium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Cassidy, Michael Philip [Univ. of Illinois, Urbana-Champaign, IL (United States)

    1978-01-01

    The crystallography and substructure of the transformations which have been hypothesized as involving a martensitic shear, and which occur between zirconium hydrides were investigated. Specifically, the formation of gamma zirconium hydride from delta hydride and the delta hydride to epsilon hydride transformation were studied. The habit planes, orientation relationships, lattice invariant shears, and interface structures were determined by transmission electron microscopy and diffraction. Surface tilts were observed and measured with an interference microscope. The direction and magnitude of the shape strain produced by the formation of gamma were determined by the measurement of fiducial scratch displacements. These results were compared with the phenomenological crystallographic theory of martensitic transformations.

  4. Characteristics and Applications of Metal Hydrides

    Science.gov (United States)

    Egan, G. J.; Lynch, F. E.

    1987-01-01

    Report discusses engineering principles of uses of metal hydrides in spacecraft. Metal hydrides absorb, store, pump, compress, and expand hydrogen gas. Additionally, they release or absorb sizeable amounts of heat as they form and decompose - property adapted for thermal-energy management or for propulsion. Describes efforts to: Identify heat sources and sinks suitable for driving metal hydride thermal cycles in spacecraft; develop concepts for hydride subsystems employing available heating and cooling methods; and produce data base on estimated sizes, masses, and performances of hydride devices for spacecraft.

  5. Characterization of hydrides and delayed hydride cracking in zirconium alloys

    Science.gov (United States)

    Fang, Qiang

    This thesis tries to fill some of the missing gaps in the study of zirconium hydrides with state-of-art experiments, cutting edge tomographical technique, and a novel numerical algorithm. A new hydriding procedure is proposed. The new anode material and solution combination overcomes many drawbacks of the AECLRTM hydriding method and leads to superior hydriding result compared to the AECL RTM hydriding procedure. The DHC crack growth velocity of as-received Excel alloy and Zr-2.5Nb alloy together with several different heat treated Excel alloy samples are measured. While it already known that the DHC crack growth velocity increases with the increase of base metal strength, the finding that the transverse plane is the weaker plane for fatigue crack growth despite having higher resistance to DHC crack growth was unexpected. The morphologies of hydrides in a coarse grained Zircally-2 sample have been studied using synchrotron x-rays at ESRF with a new technique called Diffraction Contrast Tomography that uses simultaneous collection of tomographic data and diffraction data to determine the crystallographic orientation of crystallites (grains) in 3D. It has been previously limited to light metals such as Al or Mg (due to the use of low energy x-rays). Here we show the first DCT measurements using high energy x-rays (60 keV), allowing measurements in zirconium. A new algorithm of a computationally effcient way to characterize distributions of hydrides - in particular their orientation and/or connectivity - has been proposed. It is a modification of the standard Hough transform, which is an extension of the Hough transform widely used in the line detection of EBSD patterns. Finally, a basic model of hydrogen migration is built using ABAQUS RTM, which is a mature finite element package with tested modeling modules of a variety of physical laws. The coupling of hydrogen diffusion, lattice expansion, matrix deformation and phase transformation is investigated under

  6. Synthesis of hydrides by interaction of intermetallic compounds with ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Tarasov, Boris P., E-mail: tarasov@icp.ac.ru [Institute of Problems of Chemical Physics of the Russian Academy of Sciences, Chernogolovka 142432 (Russian Federation); Fokin, Valentin N.; Fokina, Evelina E. [Institute of Problems of Chemical Physics of the Russian Academy of Sciences, Chernogolovka 142432 (Russian Federation); Yartys, Volodymyr A., E-mail: volodymyr.yartys@ife.no [Institute for Energy Technology, Kjeller NO 2027 (Norway); Department of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim NO 7491 (Norway)

    2015-10-05

    Highlights: • Interaction of the intermetallics A{sub 2}B, AB, AB{sub 2}, AB{sub 5} and A{sub 2}B{sub 17} with NH{sub 3} was studied. • The mechanism of interaction of the alloys with ammonia is temperature-dependent. • Hydrides, hydridonitrides, disproportionation products or metal–N–H compounds are formed. • NH{sub 4}Cl was used as an activator of the reaction between ammonia and intermetallics. • Interaction with ammonia results in the synthesis of the nanopowders. - Abstract: Interaction of intermetallic compounds with ammonia was studied as a processing route to synthesize hydrides and hydridonitrides of intermetallic compounds having various stoichiometries and types of crystal structures, including A{sub 2}B, AB, AB{sub 2}, AB{sub 5} and A{sub 2}B{sub 17} (A = Mg, Ti, Zr, Sc, Nd, Sm; B = transition metals, including Fe, Co, Ni, Ti and nontransition elements, Al and B). In presence of NH{sub 4}Cl used as an activator of the reaction between ammonia and intermetallic alloys, their interaction proceeds at rather mild P–T conditions, at temperatures 100–200 °C and at pressures of 0.6–0.8 MPa. The mechanism of interaction of the alloys with ammonia appears to be temperature-dependent and, following a rise of the interaction temperature, it leads to the formation of interstitial hydrides; interstitial hydridonitrides; disproportionation products (binary hydride; new intermetallic hydrides and binary nitrides) or new metal–nitrogen–hydrogen compounds like magnesium amide Mg(NH{sub 2}){sub 2}. The interaction results in the synthesis of the nanopowders where hydrogen and nitrogen atoms become incorporated into the crystal lattices of the intermetallic alloys. The nitrogenated materials have the smallest particle size, down to 40 nm, and a specific surface area close to 20 m{sup 2}/g.

  7. MAIN ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Ideological Critique of Marx and Philosophical Transformation This paper addresses a tendency today that tries to reinterpret the Marxist transformation in philosophy with a "non-ideological" perspective. It explicates the leap that Marx achieved from abstract human spirit and state reason to the proletariat world view, as well as the overall withdrawal from the abstract universalism. Such a leap and withdrawal is not only the key to the materialistic inversion of the Hegelian dialectics, but also the foundation for sticking to and enriching the Marxist philosophy. Without sticking to this direction, we will not be able to clearly understand Marxism as the successor and promoter of the magnificent cultural achievements of mankind, including the enlightenment thoughts and classical German philosophy, nor will we fully understand the value and strength of Marxist philosophy today.

  8. Properties of nanoscale metal hydrides.

    Science.gov (United States)

    Fichtner, Maximilian

    2009-05-20

    Nanoscale hydride particles may exhibit chemical stabilities which differ from those of a macroscopic system. The stabilities are mainly influenced by a surface energy term which contains size-dependent values of the surface tension, the molar volume and an additional term which takes into account a potential reduction of the excess surface energy. Thus, the equilibrium of a nanoparticular hydride system may be shifted to the hydrogenated or to the dehydrogenated side, depending on the size and on the prefix of the surface energy term of the hydrogenated and dehydrogenated material. Additional complexity appears when solid-state reactions of complex hydrides are considered and phase segregation has to be taken into account. In such a case the reversibility of complex hydrides may be reduced if the nanoparticles are free standing on a surface. However, it may be enhanced if the system is enclosed by a nanoscale void which prevents the reaction partners on the dehydrogenated side from diffusing away from each other. Moreover, the generally enhanced diffusivity in nanocrystalline systems may lower the kinetic barriers for the material's transformation and, thus, facilitate hydrogen absorption and desorption.

  9. Insertion of Group 12-16 Hydrides into NHCs: A Theoretical Investigation.

    Science.gov (United States)

    Iversen, Kalon J; Dutton, Jason L; Wilson, David

    2017-03-06

    The endocyclic ring expansion of N-heterocyclic carbene (NHC) rings by transition metal (Group 12) and main group (Group 13-16) element hydrides has been investigated in a computational study. In addition to previously reported insertion reactivity with Si, B, Be and Zn, similar reactivity is predicted to be feasible for heavier group 13 elements (Al, Ga, In, Tl), with the reaction barriers for Al-Tl calculated to be lower than for boron. Insertion is not expected with group 15-16 element hydrides, as the initial adduct formation is thermodynamically unfavourable. The reaction pathway with group 12 hydrides is calculated to be more favourable with two NHCs rather than a single NHC (analogous to Be), however hydride ring insertion with metal dihydrides is not feasible, but rather a reduced NHC is thermodynamically favoured. For group 14, ring-insertion reactivity is predicted to be feasible with the heavier dihydrides. Trends in reactivity of element hydrides may be related to the protic or hydridic character of the element hydrides.

  10. Oxidation of phenyl and hydride ligands of bis(pentamethylcyclopentadienyl)hafnium derivatives by nitrous oxide via selective oxygen atom transfer reactions: insights from quantum chemistry calculations.

    Science.gov (United States)

    Xie, Hujun; Liu, Chengcheng; Yuan, Ying; Zhou, Tao; Fan, Ting; Lei, Qunfang; Fang, Wenjun

    2016-01-21

    The mechanisms for the oxidation of phenyl and hydride ligands of bis(pentamethylcyclopentadienyl)hafnium derivatives (Cp* = η(5)-C5Me5) by nitrous oxide via selective oxygen atom transfer reactions have been systematically studied by means of density functional theory (DFT) calculations. On the basis of the calculations, we investigated the original mechanism proposed by Hillhouse and co-workers for the activation of N2O. The calculations showed that the complex with an initial O-coordination of N2O to the coordinatively unsaturated Hf center is not a local minimum. Then we proposed a new reaction mechanism to investigate how N2O is activated and why N2O selectively oxidize phenyl and hydride ligands of . Frontier molecular orbital theory analysis indicates that N2O is activated by nucleophilic attack by the phenyl or hydride ligand. Present calculations provide new insights into the activation of N2O involving the direct oxygen atom transfer from nitrous oxide to metal-ligand bonds instead of the generally observed oxygen abstraction reaction to generate metal-oxo species.

  11. Effects of metastability on hydrogen sorption in fluorine substituted hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Pinatel, E.R.; Corno, M.; Ugliengo, P.; Baricco, M., E-mail: marcello.baricco@unito.it

    2014-12-05

    Highlights: • Fluorine substitution in simple metal hydrides has been modelled. • The stability of the MH{sub (1−x)}F{sub x} solid solutions has been discussed. • Conditions for reversibility of sorption reactions have been suggested. - Abstract: In this work ab initio calculations and Calphad modelling have been coupled to describe the effect of fluorine substitution on the thermodynamics of hydrogenation–dehydrogenation in simple hydrides (NaH, AlH{sub 3} and CaH{sub 2}). These example systems have been used to discuss the conditions required for the formation of a stable hydride–fluoride solid solution necessary to obtain a reversible hydrogenation reaction.

  12. Release of hydrogen from nanoconfined hydrides by application of microwaves

    Science.gov (United States)

    Sanz-Moral, Luis Miguel; Navarrete, Alexander; Sturm, Guido; Link, Guido; Rueda, Miriam; Stefanidis, Georgios; Martín, Ángel

    2017-06-01

    The release of hydrogen from solid hydrides by thermolysis can be improved by nanoconfinement of the hydride in a suitable micro/mesoporous support, but the slow heat transfer by conduction through the support can be a limitation. In this work, a C/SiO2 mesoporous material has been synthesized and employed as matrix for nanoconfinement of hydrides. The matrix showed high surface area and pore volume (386 m2/g and 1.41 cm3/g), which enabled the confinement of high concentrations of hydride. Furthermore, by modification of the proportion between C and SiO2, the dielectric properties of the complex could be modified, making it susceptible to microwave heating. As with this heating method the entire sample is heated simultaneously, the heat transfer resistances associated to conduction were eliminated. To demonstrate this possibility, ethane 1,2-diaminoborane (EDAB) was embedded on the C/SiO2 matrix at concentrations ranging from 11 to 31%wt using a wet impregnation method, and a device appropriate for hydrogen release from this material by application of microwaves was designed with the aid of a numerical simulation. Hydrogen liberation tests by conventional heating and microwaves were compared, showing that by microwave heating hydrogen release can be initiated and stopped in shorter times.

  13. Hydride-induced embrittlement of Zircaloy-4 cladding under plane-strain tension

    Science.gov (United States)

    Daum, Robert S.

    The mechanical response of high-burnup Zircaloy-4 fuel cladding subjected to a postulated reactivity initiated accident (referred to as a rod ejection accident (REA) in a pressurized water reactor) can be affected by hydrogen embrittlement. This study addresses the hydrogen embrittlement of non-irradiated, stress-relieved Zircaloy-4 cladding under conditions (state of stress and temperature) relevant to those of a reactivity initiated accident. Specifically, the study has investigated the effects of a concentrated density of hydride particles (in the form of a rim at the outer surface of the cladding tube introduced by gas-charging) on the cladding ductility when tested under a near-plane-strain tension at 25, 300, and 375°C. The influence of the hydride-rim thickness and local hydrogen contents on cladding ductility is studied as a function of temperature and correlated with the hydride microstructure. Using synchrotron x-ray diffraction, this study has found that the delta-hydride phase (i.e., ZrHx, where x ≈ 1.66) is the predominant hydride phase to precipitate in stress-relieved Zircaloy-4 cladding for hydrogen contents up to 1250 wt ppm. At hydrogen contents above 2700 wt ppm, although delta-hydride is still the majority phase, both gamma- and epsilon-hydride phases are also observed. The volume fraction of hydrides was estimated as a function of hydrogen content, using the diffracted x-ray intensities. These estimated values agree well with calculated values assuming hydride precipitates are delta-hydride. Under near-plane-strain hoop tension, the ductility and fracture of the cladding is highly dependent on both the hydride-rim thickness and the testing temperature. At room temperature, due to a high density of hydride particles within the rim, a Mode I crack is injected shortly after yielding. This limits cladding ductility, such that it decreases with increasing thickness of the hydride rim. Cladding containing hydride rims with a thickness of ≥100

  14. The renaissance of hydrides as energy materials

    Science.gov (United States)

    Mohtadi, Rana; Orimo, Shin-Ichi

    2017-02-01

    Materials based on hydrides have been the linchpin in the development of several practical energy storage technologies, of which the most prominent example is nickel-metal hydride batteries. Motivated by the need to meet the future's energy demand, the past decade has witnessed substantial advancements in the research and development of hydrides as media for hydrogen energy storage. More recently, new and rapidly evolving discoveries have positioned hydrides as highly promising materials for future electrochemical energy storage, such as electrolytes for mono- and divalent batteries, and anodes for lithium-ion batteries. In addition, the potential of hydrides in efficient power transmission has been recently revealed. In this Review, we highlight key advances and illustrate how the versatility of hydrides has not only yielded a meaningful past, but also ensures a very bright future.

  15. Rechargeable metal hydrides for spacecraft application

    Science.gov (United States)

    Perry, J. L.

    1988-01-01

    Storing hydrogen on board the Space Station presents both safety and logistics problems. Conventional storage using pressurized bottles requires large masses, pressures, and volumes to handle the hydrogen to be used in experiments in the U.S. Laboratory Module and residual hydrogen generated by the ECLSS. Rechargeable metal hydrides may be competitive with conventional storage techniques. The basic theory of hydride behavior is presented and the engineering properties of LaNi5 are discussed to gain a clear understanding of the potential of metal hydrides for handling spacecraft hydrogen resources. Applications to Space Station and the safety of metal hydrides are presented and compared to conventional hydride storage. This comparison indicates that metal hydrides may be safer and require lower pressures, less volume, and less mass to store an equivalent mass of hydrogen.

  16. Hydride precipitation kinetics in Zircaloy-4 studied using synchrotron X-ray diffraction

    Science.gov (United States)

    Courty, Olivier F.; Motta, Arthur T.; Piotrowski, Christopher J.; Almer, Jonathan D.

    2015-06-01

    As a result of in-reactor corrosion during operation in nuclear reactors, hydrogen can enter the zirconium fuel cladding and precipitate as brittle hydride particles, which may reduce cladding ductility. Dissolved hydrogen responds to temperature gradients, resulting in transport and precipitation into cold spots so that the distribution of hydrides in the cladding is inhomogeneous. The hydrogen precipitation kinetics plays a strong role in the spatial distribution of the hydrides in the cladding. The precipitation rate is normally described as proportional to the supersaturation of hydrogen in solid solution. The proportionality constant, α2, for hydride precipitation in Zircaloy-4 is measured directly using in situ synchrotron X-Ray diffraction, at different temperatures and with three different initial hydrogen concentrations. The results validate the linear approximation of the phenomenological model and a near constant value of α2 = 4.5 × 10-4 s-1 was determined for the temperature range studied.

  17. Kinetics of hydrogen desorption from MgH2 and AlH3 hydrides

    Science.gov (United States)

    Terent'ev, P. B.; Gerasimov, E. G.; Mushnikov, N. V.; Uimin, M. A.; Maikov, V. V.; Gaviko, V. S.; Golovatenko, V. D.

    2015-12-01

    Kinetic parameters of the process of thermal decomposition of the MgH2 hydride (obtained by the method of the mechanoactivation of magnesium in a hydrogen atmosphere) and of the commercial AlH3 hydride have been studied upon the rapid heating in the range of temperatures of 150-510°C at hydrogen pressures of 0-2 atm. The time dependences of the amount of hydrogen released by the metal hydrides at different temperatures and pressures have been determined. It has been shown that the activation energies of the hydrogen desorption are 135 kJ/mol for MgH2 and 107 kJ/mol for AlH3. The maximum rates of hydrogen desorption from the investigated metal hydrides have been established, and the temperatures and initial pressures that ensure the maximum rate and maximum volume of the hydrogen release have been determined.

  18. Nanostructured, complex hydride systems for hydrogen generation

    Directory of Open Access Journals (Sweden)

    Robert A. Varin

    2015-02-01

    Full Text Available Complex hydride systems for hydrogen (H2 generation for supplying fuel cells are being reviewed. In the first group, the hydride systems that are capable of generating H2 through a mechanical dehydrogenation phenomenon at the ambient temperature are discussed. There are few quite diverse systems in this group such as lithium alanate (LiAlH4 with the following additives: nanoiron (n-Fe, lithium amide (LiNH2 (a hydride/hydride system and manganese chloride MnCl2 (a hydride/halide system. Another hydride/hydride system consists of lithium amide (LiNH2 and magnesium hydride (MgH2, and finally, there is a LiBH4-FeCl2 (hydride/halide system. These hydride systems are capable of releasing from ~4 to 7 wt.% H2 at the ambient temperature during a reasonably short duration of ball milling. The second group encompasses systems that generate H2 at slightly elevated temperature (up to 100 °C. In this group lithium alanate (LiAlH4 ball milled with the nano-Fe and nano-TiN/TiC/ZrC additives is a prominent system that can relatively quickly generate up to 7 wt.% H2 at 100 °C. The other hydride is manganese borohydride (Mn(BH42 obtained by mechano-chemical activation synthesis (MCAS. In a ball milled (2LiBH4 + MnCl2 nanocomposite, Mn(BH42 co-existing with LiCl can desorb ~4.5 wt.% H2 at 100 °C within a reasonable duration of dehydrogenation. Practical application aspects of hydride systems for H2 generation/storage are also briefly discussed.

  19. Use of reversible hydrides for hydrogen storage

    Science.gov (United States)

    Darriet, B.; Pezat, M.; Hagenmuller, P.

    1980-01-01

    The addition of metals or alloys whose hydrides have a high dissociation pressure allows a considerable increase in the hydrogenation rate of magnesium. The influence of temperature and hydrogen pressure on the reaction rate were studied. Results concerning the hydriding of magnesium rich alloys such as Mg2Ca, La2Mg17 and CeMg12 are presented. The hydriding mechanism of La2Mg17 and CeMg12 alloys is given.

  20. Inhibited solid propellant composition containing beryllium hydride

    Science.gov (United States)

    Thompson, W. W. (Inventor)

    1978-01-01

    An object of this invention is to provide a composition of beryllium hydride and carboxy-terminated polybutadiene which is stable. Another object of this invention is to provide a method for inhibiting the reactivity of beryllium hydride toward carboxy-terminated polybutadiene. It was found that a small amount of lecithin inhibits the reaction of beryllium hydride with the acid groups in carboxy terminated polybutadiene.

  1. Anodematerials for Metal Hydride Batteries

    DEFF Research Database (Denmark)

    Jensen, Jens Oluf

    1997-01-01

    by annealing at 700°C for 12 hours. The alloys appeared to be nanocrystalline with an average crystallite size around 10 nm before annealing. Special steel containers was developed for the annealing of the metal powders in inert atmosphere. The use of various annealing temperatures was investigated......This report describes the work on development of hydride forming alloys for use as electrode materials in metal hydride batteries. The work has primarily been concentrated on calcium based alloys derived from the compound CaNi5. This compound has a higher capacity compared with alloys used in today...... was developed. The parameters milling time, milling intensity, number of balls and form of the alloying metals were investigated. Based on this a final alloying technique for the subsequent preparation of electrode materials was established. The technique comprises milling for 4 hours twice possibly followed...

  2. Computational Abstraction Steps

    DEFF Research Database (Denmark)

    Thomsen, Lone Leth; Thomsen, Bent; Nørmark, Kurt

    2010-01-01

    and class instantiations. Our teaching experience shows that many novice programmers find it difficult to write programs with abstractions that materialise to concrete objects later in the development process. The contribution of this paper is the idea of initiating a programming process by creating......In this paper we discuss computational abstraction steps as a way to create class abstractions from concrete objects, and from examples. Computational abstraction steps are regarded as symmetric counterparts to computational concretisation steps, which are well-known in terms of function calls...... or capturing concrete values, objects, or actions. As the next step, some of these are lifted to a higher level by computational means. In the object-oriented paradigm the target of such steps is classes. We hypothesise that the proposed approach primarily will be beneficial to novice programmers or during...

  3. Predicting formation enthalpies of metal hydrides

    DEFF Research Database (Denmark)

    Andreasen, A.

    2004-01-01

    In order for the hydrogen based society viz. a society in which hydrogen is the primary energy carrier to become realizable an efficient way of storing hydrogen is required. For this purpose metal hydrides are serious candidates. Metal hydrides are formedby chemical reaction between hydrogen...... and metal and for the stable hydrides this is associated with release of heat (#DELTA#H_f ). The more thermodynamically stable the hydride, the larger DHf, and the higher temperature is needed in order to desorphydrogen (reverse reaction) and vice versa. For practical application the temperature needed...

  4. Research on Metal Hydride Compressor System

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Ti-Zr series Laves phase hydrogen storage alloys with good hydrogen storage properties, such as large hydrogen capacity, rapid hydriding and dehydriding rate, high compression ratio, gentle plateau, small hysteresis, easily being activated and long cyclic stability etc. for metal hydride compressor have been investigated. In addition, a hydride compressor with special characteristics, namely, advanced filling method, good heat transfer effect and reasonable structural design etc. has also been constructed. A hydride compressor cryogenic system has been assembled coupling the compressor with a J-T micro-throttling refrigeration device and its cooling capacity can reach 0.4 W at 25 K.

  5. Thermodynamic Hydricity of Transition Metal Hydrides.

    Science.gov (United States)

    Wiedner, Eric S; Chambers, Matthew B; Pitman, Catherine L; Bullock, R Morris; Miller, Alexander J M; Appel, Aaron M

    2016-08-10

    Transition metal hydrides play a critical role in stoichiometric and catalytic transformations. Knowledge of free energies for cleaving metal hydride bonds enables the prediction of chemical reactivity, such as for the bond-forming and bond-breaking events that occur in a catalytic reaction. Thermodynamic hydricity is the free energy required to cleave an M-H bond to generate a hydride ion (H(-)). Three primary methods have been developed for hydricity determination: the hydride transfer method establishes hydride transfer equilibrium with a hydride donor/acceptor pair of known hydricity, the H2 heterolysis method involves measuring the equilibrium of heterolytic cleavage of H2 in the presence of a base, and the potential-pKa method considers stepwise transfer of a proton and two electrons to give a net hydride transfer. Using these methods, over 100 thermodynamic hydricity values for transition metal hydrides have been determined in acetonitrile or water. In acetonitrile, the hydricity of metal hydrides spans a range of more than 50 kcal/mol. Methods for using hydricity values to predict chemical reactivity are also discussed, including organic transformations, the reduction of CO2, and the production and oxidation of hydrogen.

  6. Coinage Metal Hydrides: Synthesis, Characterization, and Reactivity.

    Science.gov (United States)

    Jordan, Abraham J; Lalic, Gojko; Sadighi, Joseph P

    2016-08-10

    Hydride complexes of copper, silver, and gold encompass a broad array of structures, and their distinctive reactivity has enabled dramatic recent advances in synthesis and catalysis. This Review summarizes the synthesis, characterization, and key stoichiometric reactions of isolable or observable coinage metal hydrides. It discusses catalytic processes in which coinage metal hydrides are known or probable intermediates, and presents mechanistic studies of selected catalytic reactions. The purpose of this Review is to convey how developments in coinage metal hydride chemistry have led to new organic transformations, and how developments in catalysis have in turn inspired the synthesis of reactive new complexes.

  7. Hydriding and Dehydriding Properties of Zinc Borohydride, Nickel, and Titanium-Added Magnesium Hydride

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Young Jun; Kwon, Sung Nam; Song, Myoung Youp [Chonbuk National University, Jeonju (Korea, Republic of)

    2015-11-15

    A Zn(BH{sub 4}){sub 2} sample was prepared by milling ZnCl{sub 2} and NaBH{sub 4} in a planetary ball mill under Ar gas. This sample contained NaCl. Then, 90 wt% MgH{sub 2}-5 wt% Zn(BH{sub 4}){sub 2}-2.5 wt% Ni-2.5 wt% Ti samples [named 90MgH{sub 2}-5Zn(BH{sub 4}){sub 2}-2.5Ni-2.5Ti] were prepared by milling in a planetary ball mill under H{sub 2} gas. The hydrogen absorption and release properties of the prepared samples were investigated. In particular, the variations of the initial hydriding and dehydriding rates with temperature were examined. SEM micrographs and XRD patterns of 90MgH{sub 2}-5Zn(BH{sub 4}){sub 2}-2.5Ni-2.5Ti after reactive mechanical grinding and after hydriding-dehydriding were also studied. Particle size distributions and BET specific surface areas of 90MgH{sub 2}-5Zn(BH{sub 4}){sub 2}-2.5Ni-2.5Ti after reactive mechanical grinding and after 11 hydriding-dehydriding cycles were analyzed. The 90MgH{sub 2}-5Zn(BH{sub 4}){sub 2}-2.5Ni-2.5Ti had an effective hydrogen storage capacity (the quantity of hydrogen absorbed for 60 min) of near 5 wt% (4.91 wt% at 593 K).

  8. Selected Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Elasticity of Vague Language Abstract:This paper develops an overarching theoretical framework for dealing with the strategic elastic- ity of vague language. Employing the metaphor of a slingshot, it describes how the vague language (VL) is stretched to meet the needs of communication. Drawing attention to the positive and effective role played by VL, the study further looks into how the VL theory is derived from real - life data of ten- sion -prone encounters. The empirical evidence validates the theory~ main maxim and its four specific maxims, and lends support to the following findings: 1 ) the pragmatic functions which VL performs, their linguistic realizations, and the pragmatic maxims they conform to are interconnected; 2) the dom- inant factor in the functioning of VL is the communicative goal; and 3 ) stretching on a continuum of polarities, between soft and tough, firm and flexible, cooperative and uncooperative, shows the versa- tility and elasticity of VL. An important implication of this study is that while VL~ vagueness is context -governed and culture- denendent it~ nll A ~1.o~;.;~.. ; :

  9. Metal Hydrides for Rechargeable Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Valoeen, Lars Ole

    2000-03-01

    Rechargeable battery systems are paramount in the power supply of modern electronic and electromechanical equipment. For the time being, the most promising secondary battery systems for the future are the lithium-ion and the nickel metal hydride (NiMH) batteries. In this thesis, metal hydrides and their properties are described with the aim of characterizing and improving those. The thesis has a special focus on the AB{sub 5} type hydrogen storage alloys, where A is a rare earth metal like lanthanum, or more commonly misch metal, which is a mixture of rare earth metals, mainly lanthanum, cerium, neodymium and praseodymium. B is a transition metal, mainly nickel, commonly with additions of aluminium, cobalt, and manganese. The misch metal composition was found to be very important for the geometry of the unit cell in AB{sub 5} type alloys, and consequently the equilibrium pressure of hydrogen in these types of alloys. The A site substitution of lanthanum by misch metal did not decrease the surface catalytic properties of AB{sub 5} type alloys. B-site substitution of nickel with other transition elements, however, substantially reduced the catalytic activity of the alloy. If the internal pressure within the electrochemical test cell was increased using inert argon gas, a considerable increase in the high rate charge/discharge performance of LaNi{sub 5} was observed. An increased internal pressure would enable the utilisation of alloys with a high hydrogen equivalent pressure in batteries. Such alloys often have favourable kinetics and high hydrogen diffusion rates and thus have a potential for improving the high current discharge rates in metal hydride batteries. The kinetic properties of metal hydride electrodes were found to improve throughout their lifetime. The activation properties were found highly dependent on the charge/discharge current. Fewer charge/discharge cycles were needed to activate the electrodes if a small current was used instead of a higher

  10. Metal Hydrides for Rechargeable Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Valoeen, Lars Ole

    2000-03-01

    Rechargeable battery systems are paramount in the power supply of modern electronic and electromechanical equipment. For the time being, the most promising secondary battery systems for the future are the lithium-ion and the nickel metal hydride (NiMH) batteries. In this thesis, metal hydrides and their properties are described with the aim of characterizing and improving those. The thesis has a special focus on the AB{sub 5} type hydrogen storage alloys, where A is a rare earth metal like lanthanum, or more commonly misch metal, which is a mixture of rare earth metals, mainly lanthanum, cerium, neodymium and praseodymium. B is a transition metal, mainly nickel, commonly with additions of aluminium, cobalt, and manganese. The misch metal composition was found to be very important for the geometry of the unit cell in AB{sub 5} type alloys, and consequently the equilibrium pressure of hydrogen in these types of alloys. The A site substitution of lanthanum by misch metal did not decrease the surface catalytic properties of AB{sub 5} type alloys. B-site substitution of nickel with other transition elements, however, substantially reduced the catalytic activity of the alloy. If the internal pressure within the electrochemical test cell was increased using inert argon gas, a considerable increase in the high rate charge/discharge performance of LaNi{sub 5} was observed. An increased internal pressure would enable the utilisation of alloys with a high hydrogen equivalent pressure in batteries. Such alloys often have favourable kinetics and high hydrogen diffusion rates and thus have a potential for improving the high current discharge rates in metal hydride batteries. The kinetic properties of metal hydride electrodes were found to improve throughout their lifetime. The activation properties were found highly dependent on the charge/discharge current. Fewer charge/discharge cycles were needed to activate the electrodes if a small current was used instead of a higher

  11. Composite Materials for Hazard Mitigation of Reactive Metal Hydrides.

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, Joseph William; Cordaro, Joseph Gabriel; Sartor, George B.; Dedrick, Daniel E.; Reeder, Craig L.

    2012-02-01

    In an attempt to mitigate the hazards associated with storing large quantities of reactive metal hydrides, polymer composite materials were synthesized and tested under simulated usage and accident conditions. The composites were made by polymerizing vinyl monomers using free-radical polymerization chemistry, in the presence of the metal hydride. Composites with vinyl-containing siloxane oligomers were also polymerized with and without added styrene and divinyl benzene. Hydrogen capacity measurements revealed that addition of the polymer to the metal hydride reduced the inherent hydrogen storage capacity of the material. The composites were found to be initially effective at reducing the amount of heat released during oxidation. However, upon cycling the composites, the mitigating behavior was lost. While the polymer composites we investigated have mitigating potential and are physically robust, they undergo a chemical change upon cycling that makes them subsequently ineffective at mitigating heat release upon oxidation of the metal hydride. Acknowledgements The authors would like to thank the following people who participated in this project: Ned Stetson (U.S. Department of Energy) for sponsorship and support of the project. Ken Stewart (Sandia) for building the flow-through calorimeter and cycling test stations. Isidro Ruvalcaba, Jr. (Sandia) for qualitative experiments on the interaction of sodium alanate with water. Terry Johnson (Sandia) for sharing his expertise and knowledge of metal hydrides, and sodium alanate in particular. Marcina Moreno (Sandia) for programmatic assistance. John Khalil (United Technologies Research Corp) for insight into the hazards of reactive metal hydrides and real-world accident scenario experiments. Summary In an attempt to mitigate and/or manage hazards associated with storing bulk quantities of reactive metal hydrides, polymer composite materials (a mixture of a mitigating polymer and a metal hydride) were synthesized and tested

  12. Kinetics of hydride front in Zircaloy-2 and H release from a fractional hydrided surface

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, M.; Gonzalez-Gonzalez, A.; Moya, J. S.; Remartinez, B.; Perez, S.; Sacedon, J. L. [Instituto de Ciencia de Materiales de Madrid (CSIC), Sor Juana Ines de la Cruz 3, Cantoblanco, 28049 Madrid (Spain); Iberdrola, Tomas Redondo 3, 28033 Madrid (Spain); Instituto de Ciencia de Materiales de Madrid (CSIC), Sor Juana Ines de la Cruz 3, Cantoblanco, 28049 Madrid (Spain)

    2009-07-15

    The authors study the hydriding process on commercial nuclear fuel claddings from their inner surface using an ultrahigh vacuum method. The method allows determining the incubation and failure times of the fuel claddings, as well as the dissipated energy and the partial pressure of the desorbed H{sub 2} from the outer surface of fuel claddings during the hydriding process. The correlation between the hydriding dissipated energy and the amount of zirconium hydride (formed at different stages of the hydriding process) leads to a near t{sup 1/2} potential law corresponding to the time scaling of the reaction for the majority of the tested samples. The calibrated relation between energy and hydride thickness allows one to calculate the enthalpy of the {delta}-ZrH{sub 1.5} phase. The measured H{sub 2} desorption from the external surface is in agreement with a proposed kinetic desorption model from the hydrides precipitated at the surface.

  13. Development of a novel metal hydride-air secondary battery

    Energy Technology Data Exchange (ETDEWEB)

    Gamburzev, S.; Zhang, W.; Velev, O.A.; Srinivasan, S.; Appleby, A.J. [Texas A and M University, College Station (United States). Center for Electrochemical Systems and Hydrogen Research; Visintin, A. [Universidad Nacional de La Plata (Argentina). Insituto Nacional de Investigaciones Fisicoquimica Teoricas y Applicadas

    1998-05-01

    A laboratory metal hydride/air cell was evaluated. Charging was via a bifunctional air gas-diffusion electrode. Mixed nickel and cobalt oxides, supported on carbon black and activated carbon, were used as catalysts in this electrode. At 30 mA cm{sup -2} in 6 M KOH, the air electrode potentials were -0.2 V (oxygen reduction) and +0.65 V (oxygen evolution) vs Hg/HgO. The laboratory cell was cycled for 50 cycles at the C/2 rate (10 mA cm{sup -2}). The average discharge/charge voltages of the cell were 0.65 and 1.6 V, respectively. The initial capacity of the metal hydride electrode decreased by about 15% after 50 cycles. (author)

  14. Ionic conduction of lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Pilipenko, G.I.; Oparin, D.V.; Zhuravlev, N.A.; Gavrilov, F.F.

    1987-09-01

    Using the electrical-conductivity- and NMR-measurement- methods, the ionic-conduction mechanism is established in stoichiometric lithium hydride single crystals. The activation energies of migration of anion- and cation-vacancies and the formation of Schottky-pair defects are determined. They assume that the mechanisms of self-diffusion and conductivity are different in lithium hydride.

  15. Submillimeter Spectroscopy of Hydride Molecules

    Science.gov (United States)

    Phillips, T. G.

    1998-05-01

    Simple hydride molecules are of great importance in astrophysics and astrochemistry. Physically they dominate the cooling of dense, warm phases of the ISM, such as the cores and disks of YSOs. Chemically they are often stable end points of chemical reactions, or may represent important intermediate stages of the reaction chains, which can be used to test the validity of the process. Through the efforts of astronomers, physicists, chemists, and laboratory spectroscopists we have an approximate knowledge of the abundance of some of the important species, but a great deal of new effort will be required to achieve the comprehensive and accurate data set needed to determine the energy balance and firmly establish the chemical pathways. Due to the low moment of inertia, the hydrides rotate rapidly and so have their fundamental spectral lines in the submillimeter. Depending on the cloud geometry and temperature profile they may be observed in emission or absorption. Species such as HCl, HF, OH, CH, CH(+) , NH_2, NH_3, H_2O, H_2S, H_3O(+) and even H_3(+) have been detected, but this is just a fraction of the available set. Also, most deduced abundances are not nearly sufficiently well known to draw definitive conclusions about the chemical processes. For example, the most important coolant for many regions, H_2O, has a possible range of deduced abundance of a factor of 1000. The very low submillimeter opacity at the South Pole site will be a significant factor in providing a new capabilty for interstellar hydride spectroscopy. The new species and lines made available in this way will be discussed.

  16. Crack growth in the through-thickness direction of hydrided thin-wall Zircaloy sheet

    Science.gov (United States)

    Raynaud, Patrick A.; Koss, Donald A.; Motta, Arthur T.

    2012-01-01

    In a reactivity-initiated accident, cladding failure may occur by crack initiation within a defect such as a hydride rim or blister and subsequent crack propagation through the thickness of the thin-wall cladding. In such a circumstance, determining the cladding resistance to crack propagation in the through-thickness direction is crucial to predicting cladding failure. To address this issue, through-thickness crack propagation in hydrided Zircaloy-4 sheet was analyzed at 25 °C, 300 °C, and 375 °C. At 25 °C, the fracture toughness decreased with increasing hydrogen content and with an increasing fraction of radial hydrides. Hydride particles fractured ahead of the crack tip, creating a path for crack growth. At both 300 °C and 375 °C, the resistance to crack-growth initiation was sufficiently high that crack extension was often caused by crack-tip blunting. There was no evidence of hydride particles fracturing near the crack tip, and no significant effect of hydrogen content on fracture toughness was observed at these elevated temperatures.

  17. Journal Abstracts

    Directory of Open Access Journals (Sweden)

    Osman Eren Karpuzoğlu

    2000-08-01

    Resulting from Assault Rutty GN, Busuttil A. AmJ Forensic Med Pathol. 2000, Jun;21(2:151-4. Nekrotizan fasiit subkutanöz dokular ve fasyanın genellikle mikst enfeksiyonu veya Gmp A Strepteco- ccus Piyogenes'\\e birlikte veya ayrı Stafilococcus Aenıs tarafından oluştunılan ilerleyici, ölümcül, hızlı, nekrotizan bir enfeksiyondur. Adli tıp uygulamaları sırasında karşılaşılan üç olgu sunulmuştur. İki olgu saldırı sonucu, ve üçüncüsü ise saldırı ve hırsızlık taklidi sırasında meydana gelmişti. Hikaye, olay yeri ve patolojik bulgular kısa bir litaratür özeti ile birlikte sunulmuştur. ADOLFS ANLARIN MADDE KULLANIMINA BAŞLAMASINDA ETNİK FARKLILIKLAR Ethnic Differences in Adolescent Substance Initiation Sequences Guerra LM, Romano PS, Samuels SJ, Kass PH. Arch Pediatr Adolesc Med. 2000, 154: 1089-95. Çalışmada; Amerikalı lise öğrencilerinin tütün, alkol, marijuana ve kokaine başlamasındaki etnik farklılıkları incelemek ve etnik kökenin yasal (meşru maddelerden yasa dışı olanlara doğru bir kullanım sırası izlenmesinde veya yasa dışı maddelere yasal olanlardan önce başlamada bir etken olup olmadığını belirlemek amaçlanmıştır. 1995 yılında toplam 8550 lise öğrencisi gruplama yöntemi kullanılarak, rastlantısal olarak seçilmiştir. Katılımcılar, madde kullanımına başlama sırasına göre; hiç kullanmayanlar, sadece yasal maddeleri kullananlar, önce yasal maddeler daha sonra yasa dışı maddeleri kullananlar (tipik, ilk önce yasa dışı maddeleri kullananlar (tersine durum, yasal maddeler ve yasa dışı maddeleri aynı zamanda (eş zamanlı kullananlar olmak üzere 4 kategoriye ayrılmıştır. Yaş, annenin eğitimi ve yaşanılan bölge istatistiki olarak belirlendikten sonra, yasal maddelerle başlayıp, daha sonra yasa dışı madde kullanımına geçmenin siyah etnik köken ve erkek cinsiyeti ile anlamlı derecede ilişkisi olduğu görülmüştür. Anneleri en az lise mezunu olan

  18. Understanding of hydriding mechanisms of zircaloy-4 alloy during corrosion in PWR simulated conditions and influence of zirconium hydrides on zircaloy-4 corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Bisor-Melloul, C.; Tupin, M.; Bossis, P. [DEN/DANS/DMN/SEMI, CEA/Saclay, 91191 Gif-sur-Yvette (France); Chene, J. [DEN/DANS/DPC/SCCME, CEA/Saclay, 91191 Gif-sur-Yvette (France); Bechade, J.L. [DEN/DANS/DMN/SRMA, CEA/Saclay, 91191 Gif-sur-Yvette (France); Motta, A. [Mechanical and Nuclear Engineering Department, Penn State University, 227 Reber Building, University Park, PA 16802 (United States)

    2010-07-01

    . The characterization of the pre-hydrided samples revealed some changes compared with the reference ones, such as the presence of the Zr{sub 3}O sub-oxide at the inner metal/oxide interface, a lower fraction of {beta}-ZrO{sub 2} in the oxide and a faster diffusion of oxygen species through grain boundaries of zirconia (TEM, {mu}-XRD, {sup 18}O isotopic experiments). Moreover, during oxidation, the hydrogen initially present in the hydride phase remains in the metallic matrix and leads to the allotropic transformation {delta}-ZrH{sub 1,66} {yields} {epsilon}-ZrH{sub 2}.

  19. Hydrogen generation using silicon nanoparticles and their mixtures with alkali metal hydrides

    Science.gov (United States)

    Patki, Gauri Dilip

    mole of Si. We compare our silicon nanoparticles (˜10nm diameter) with commercial silicon nanopowder (hydrogen production rate increased by a factor of 150. However, in all cases, silicon requires a base (e.g. NaOH, KOH, hydrazine) to catalyze its reaction with water. Metal hydrides are also promising hydrogen storage materials. The optimum metal hydride would possess high hydrogen storage density at moderate temperature and pressure, release hydrogen safely and controllably, and be stable in air. Alkali metal hydrides have high hydrogen storage density, but exhibit high uncontrollable reactivity with water. In an attempt to control this explosive nature while maintaining high storage capacity, we mixed our silicon nanoparticles with the hydrides. This has dual benefits: (1) the hydride- water reaction produces the alkali hydroxide needed for base-catalyzed silicon oxidation, and (2) dilution with 10nm coating by, the silicon may temper the reactivity of the hydride, making the process more controllable. Initially, we analyzed hydrolysis of pure alkali metal hydrides and alkaline earth metal hydrides. Lithium hydride has particularly high hydrogen gravimetric density, along with faster reaction kinetics than sodium hydride or magnesium hydride. On analysis of hydrogen production we found higher hydrogen yield from the silicon nanoparticle—metal hydride mixture than from pure hydride hydrolysis. The silicon-hydride mixtures using our 10nm silicon nanoparticles produced high hydrogen yield, exceeding the theoretical yield. Some evidence of slowing of the hydride reaction rate upon addition of silicon nanoparticles was observed.

  20. Hydride heat pump with heat regenerator

    Science.gov (United States)

    Jones, Jack A. (Inventor)

    1991-01-01

    A regenerative hydride heat pump process and system is provided which can regenerate a high percentage of the sensible heat of the system. A series of at least four canisters containing a lower temperature performing hydride and a series of at least four canisters containing a higher temperature performing hydride is provided. Each canister contains a heat conductive passageway through which a heat transfer fluid is circulated so that sensible heat is regenerated. The process and system are useful for air conditioning rooms, providing room heat in the winter or for hot water heating throughout the year, and, in general, for pumping heat from a lower temperature to a higher temperature.

  1. Hydrogen storage in complex metal hydrides

    National Research Council Canada - National Science Library

    Bogdanovic, Borislav; Felderhoff, Michael; Streukens, Guido

    2009-01-01

    ...) are solid-state hydrogen-storage materials with high hydrogen capacities. They can be used in combination with fuel cells as a hydrogen source thus enabling longer operation times compared with classical metal hydrides...

  2. Method of forming metal hydride films

    Science.gov (United States)

    Steinberg, R.; Alger, D. L.; Cooper, D. W. (Inventor)

    1977-01-01

    The substrate to be coated (which may be of metal, glass or the like) is cleaned, both chemically and by off-sputtering in a vacuum chamber. In an ultra-high vacuum system, vapor deposition by a sublimator or vaporizer coats a cooled shroud disposed around the substrate with a thin film of hydride forming metal which getters any contaminant gas molecules. A shutter is then opened to allow hydride forming metal to be deposited as a film or coating on the substrate. After the hydride forming metal coating is formed, deuterium or other hydrogen isotopes are bled into the vacuum system and diffused into the metal film or coating to form a hydride of metal film. Higher substrate temperatures and pressures may be used if various parameters are appropriately adjusted.

  3. Sealed aerospace metal-hydride batteries

    Science.gov (United States)

    Coates, Dwaine

    1992-01-01

    Nickel metal hydride and silver metal hydride batteries are being developed for aerospace applications. There is a growing market for smaller, lower cost satellites which require higher energy density power sources than aerospace nickel-cadmium at a lower cost than space nickel-hydrogen. These include small LEO satellites, tactical military satellites and satellite constellation programs such as Iridium and Brilliant Pebbles. Small satellites typically do not have the spacecraft volume or the budget required for nickel-hydrogen batteries. NiCd's do not have adequate energy density as well as other problems such as overcharge capability and memory effort. Metal hydride batteries provide the ideal solution for these applications. Metal hydride batteries offer a number of advantages over other aerospace battery systems.

  4. Destabilization of magnesium hydride through interface engineering

    OpenAIRE

    Mooij, L.P.A.

    2013-01-01

    The aim of this thesis is to study the thermodynamics of hydrogenation of nanoconfined magnesium within a thin film multilayer model system. Magnesium hydride is a potential material for hydrogen storage, which is a key component in a renewable energy system based on hydrogen. In bulk form, magnesium hydride is very stable, which means that hydrogen is released only at elevated temperature. Furthermore, the kinetics of hydrogen sorption is slow, which further hampers the practical use of this...

  5. Angle-dependent hard X-ray photoemission study of Nb hydride formation in high-pressure supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Soda, Kazuo, E-mail: j45880a@cc.nagoya-u.ac.jp [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kondo, Hiroki; Yamaguchi, Kanta; Kato, Masahiko [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Shiraki, Tatsuhito; Niwa, Ken; Kusaba, Keiji; Hasegawa, Masashi [Department of Crystalline Materials Science, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Xeniya, Kozina; Ikenaga, Eiji [Japan Synchrotron Radiation Research Institute, 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)

    2015-09-15

    Highlights: • Nb hydrides in 10-GPa supercritical water are studied by photoelectron spectroscopy. • The hydride components of the Nb 3d core-level spectra are increased with the depth. • The bulk valence-band spectrum shows a split band due to the Nb–H bond formation. • The hydrides are formed in the bulk and their surfaces are covered with Nb oxides. - Abstract: Nb hydrides formation in 10-GPa supercritical water has been investigated by angle-dependent micro-beam hard X-ray photoemission spectroscopy. In the Nb 3d core-level spectra, Nb hydride components are found in the slightly high binding energy side of the metallic components, and the oxide ones are observed even though little oxides are recognized in X-ray diffraction patterns. Obtained emission-angle dependence of the Nb 3d core-level spectra of Nb hydride specimens shows that the Nb hydride components increase with the emission angle decreased i.e. the sampling depth increased, while the oxide ones decrease. The bulk valence-band spectrum is obtained by decomposing the measured valence-band spectra into a bulk and surface components with use of the emission-angle dependence of the core-level and valence-band spectra; it consists of two bands. This implies the Nb–H chemical bond formation and Nb in an oxidation state, consistent with reported band structure calculations and the observed core-level chemical shifts. Thus it is confirmed by valence-band and core-level photoelectron spectroscopy that the Nb hydrides are formed inside the specimen, irrespective to the well-known high oxidation ability of supercritical water.

  6. Comparison between different reactions of group IV hydride with H

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Shaolong; ZHANG; Xuqiang; ZHANG; Qinggang; ZHANG; Yici

    2006-01-01

    The four-dimensional time-dependent quantum dynamics calculations for reactions of group IV hydride with H are carried out by employing the semirigid vibrating rotor target model and the time-dependent wave packet method. The reaction possibility, cross section and rate constants for reactions (H+SiH4 and H+GeH4) in different initial vibrational and rotational states are obtained. The common feature for such kind of reaction process is summarized. The theoretical result is consistent with available measurement, which indicates the credibility of this theory and the potential energy surface.

  7. An all-solid-state metal hydride - Sulfur lithium-ion battery

    Science.gov (United States)

    López-Aranguren, Pedro; Berti, Nicola; Dao, Anh Ha; Zhang, Junxian; Cuevas, Fermín; Latroche, Michel; Jordy, Christian

    2017-07-01

    A metal hydride is used for the first time as anode in a complete all-solid-state battery with sulfur as cathode and LiBH4 as solid electrolyte. The hydride is a nanocomposite made of MgH2 and TiH2 counterparts. The battery exhibits a high reversible capacity of 910 mAh g-1 with discharge plateaus at 1.8 V and 1.4 V. Moreover, the capacity remains to 85% of the initial value over the 25 first charge/discharge cycles.

  8. gamma-Zr-Hydride Precipitate in Irradiated Massive delta- Zr-Hydride

    DEFF Research Database (Denmark)

    Warren, M. R.; Bhattacharya, D. K.

    1975-01-01

    During examination of A Zircaloy-2-clad fuel pin, which had been part of a test fuel assembly in a boiling water reactor, several regions of severe internal hydriding were noticed in the upper-plenum end of the pin. Examination of similar fuel pins has shown that hydride of this type is caused...

  9. The Origin of the Catalytic Activity of a Metal Hydride in CO2 Reduction.

    Science.gov (United States)

    Kato, Shunsuke; Matam, Santhosh Kumar; Kerger, Philipp; Bernard, Laetitia; Battaglia, Corsin; Vogel, Dirk; Rohwerder, Michael; Züttel, Andreas

    2016-05-10

    Atomic hydrogen on the surface of a metal with high hydrogen solubility is of particular interest for the hydrogenation of carbon dioxide. In a mixture of hydrogen and carbon dioxide, methane was markedly formed on the metal hydride ZrCoHx in the course of the hydrogen desorption and not on the pristine intermetallic. The surface analysis was performed by means of time-of-flight secondary ion mass spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy, for the in situ analysis. The aim was to elucidate the origin of the catalytic activity of the metal hydride. Since at the initial stage the dissociation of impinging hydrogen molecules is hindered by a high activation barrier of the oxidised surface, the atomic hydrogen flux from the metal hydride is crucial for the reduction of carbon dioxide and surface oxides at interfacial sites.

  10. The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components Delayed Hydride Cracking

    CERN Document Server

    Puls, Manfred P

    2012-01-01

    By drawing together the current theoretical and experimental understanding of the phenomena of delayed hydride cracking (DHC) in zirconium alloys, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components: Delayed Hydride Cracking provides a detailed explanation focusing on the properties of hydrogen and hydrides in these alloys. Whilst the focus lies on zirconium alloys, the combination of both the empirical and mechanistic approaches creates a solid understanding that can also be applied to other hydride forming metals.   This up-to-date reference focuses on documented research surrounding DHC, including current methodologies for design and assessment of the results of periodic in-service inspections of pressure tubes in nuclear reactors. Emphasis is placed on showing that our understanding of DHC is supported by progress across a broad range of fields. These include hysteresis associated with first-order phase transformations; phase relationships in coherent crystalline metallic...

  11. Room temperature oxidative intercalation with chalcogen hydrides: Two-step method for the formation of alkali-metal chalcogenide arrays within layered perovskites

    Energy Technology Data Exchange (ETDEWEB)

    Ranmohotti, K.G. Sanjaya; Montasserasadi, M. Dariush; Choi, Jonglak; Yao, Yuan; Mohanty, Debasish; Josepha, Elisha A.; Adireddy, Shiva; Caruntu, Gabriel [Department of Chemistry and the Advanced Materials Research Institute, University of New Orleans, New Orleans, LA 70148-2820 (United States); Wiley, John B., E-mail: jwiley@uno.edu [Department of Chemistry and the Advanced Materials Research Institute, University of New Orleans, New Orleans, LA 70148-2820 (United States)

    2012-06-15

    Highlights: ► Topochemical reactions involving intercalation allow construction of metal chalcogenide arrays within perovskite hosts. ► Gaseous chalcogen hydrides serve as effect reactants for intercalation of sulfur and selenium. ► New compounds prepared by a two-step intercalation strategy are presented. -- Abstract: A two-step topochemical reaction strategy utilizing oxidative intercalation with gaseous chalcogen hydrides is presented. Initially, the Dion-Jacobson-type layered perovskite, RbLaNb{sub 2}O{sub 7}, is intercalated reductively with rubidium metal to make the Ruddlesden-Popper-type layered perovskite, Rb{sub 2}LaNb{sub 2}O{sub 7}. This compound is then reacted at room-temperature with in situ generated H{sub 2}S gas to create Rb-S layers within the perovskite host. Rietveld refinement of X-ray powder diffraction data (tetragonal, a = 3.8998(2) Å, c = 15.256(1) Å; space group P4/mmm) shows the compound to be isostructural with (Rb{sub 2}Cl)LaNb{sub 2}O{sub 7} where the sulfide resides on a cubic interlayer site surrounded by rubidium ions. The mass increase seen on sulfur intercalation and the refined S site occupation factor (∼0.8) of the product indicate a higher sulfur content than expected for S{sup 2−} alone. This combined with the Raman studies, which show evidence for an H-S stretch, indicate that a significant fraction of the intercalated sulfide exists as hydrogen sulfide ion. Intercalation reactions with H{sub 2}Se{sub (g)} were also carried out and appear to produce an isostructural selenide compound. The utilization of such gaseous hydride reagents could significantly expand multistep topochemistry to a larger number of intercalants.

  12. YNi and its hydrides: Phase stabilities, electronic structures and chemical bonding properties from first principles

    Energy Technology Data Exchange (ETDEWEB)

    Matar, S.F., E-mail: matar@icmcb-bordeaux.cnrs.fr [CNRS, Universite de Bordeaux, ICMCB, 87 avenue du Docteur Albert Schweitzer, F-33608 Pessac (France); Nakhl, M. [Universite Libanaise, Laboratoire de Chimie-Physique des Materiaux LCPM, Fanar (Lebanon); Al Alam, A.F.; Ouaini, N. [Universite Saint-Esprit de Kaslik, Faculte des Sciences et de Genie Informatique, Jounieh (Lebanon); Chevalier, B. [CNRS, Universite de Bordeaux, ICMCB, 87 avenue du Docteur Albert Schweitzer, F-33608 Pessac (France)

    2010-11-25

    Graphical abstract: Base centered orthorhombic YNiH{sub X} structure. For x = 3, only H1 and H2 are present. Highest hydrogen content YNiH{sub 4} is obtained when H3 are added. - Abstract: Within density functional theory, establishing the equations of states of YNi in two different controversial structures in the literature, leads to determine the orthorhombic FeB-type as the ground state one with small energy difference. For YNiH{sub 3} and YNiH{sub 4} hydrides crystallizing in the orthorhombic CrB-type structure the geometry optimization and the ab initio determination of the H atomic positions show that the stability of hydrogen decreases from the tri- to the tetra- hydride. New states brought by hydrogen within the valence band lead to its broadening and to enhanced localization of metal density of states. The chemical bonding analysis shows a preferential Ni-H bonding versus Y-H.

  13. Abstração inicial da precipitação em microbacia hidrográfica com escoamento efêmero Initial abstraction of small watersheds of ephemeral flood

    Directory of Open Access Journals (Sweden)

    Carlos R. de Mello

    2003-12-01

    Full Text Available O uso do método CN (Curve Number em bacias hidrográficas no Brasil é comum, porém sua precisão pode ser questionável, em especial para bacias com escoamento efêmero, onde as respostas hidrológicas possuem comportamento diferenciado. Este trabalho objetiva estudar as abstrações iniciais das precipitações ocorridas em uma microbacia hidrográfica com escoamento efêmero, propondo um modelo para cálculo da lâmina de abstração, que é uma das variáveis de entrada do método CN. Foram analisados 25 eventos de chuva-escoamento durante o ano hidrológico 2002/2003, determinando-se os valores da abstração inicial para cada evento e, pelo método CN, o armazenamento potencial da microbacia. A abstração (lâmina e tempo foi correlacionada a variáveis hidrológicas, comprovando a influência destas no seu valor. O modelo foi gerado por regressão múltipla linear em função das variáveis hidrológicas. As características estatísticas do modelo permitem o seu emprego. A razão entre a lâmina de abstração e o armazenamento potencial produziu resultados que mostram uma constante bastante inferior ao valor de 0,2 sugerido pelo método CN, encontrando-se valor médio de 0,0155, além de alta variabilidade nos valores desta constante (0 a 0,081, revelando não ser possível uma boa estimativa da abstração baseada apenas no armazenamento potencial do solo.The curve number - CN Method (SCS-USDA is widely applied for small watersheds in Brazil, although its precision can be questionable, specially for small watersheds of ephemeral flood that are different from watersheds of perennial flood. The objective of this work is to study the initial abstraction of watershed of ephemeral flood and suggest a mathematical model to calculate this parameter which is an important variable of CN-Method. In all 25 events of rainfall-runoff evaluated during the hydrologic year 2002/2003 in order to determine the initial abstraction values for each

  14. Thin-film metal hydrides.

    Science.gov (United States)

    Remhof, Arndt; Borgschulte, Andreas

    2008-12-01

    The goal of the medieval alchemist, the chemical transformation of common metals into nobel metals, will forever be a dream. However, key characteristics of metals, such as their electronic band structure and, consequently, their electric, magnetic and optical properties, can be tailored by controlled hydrogen doping. Due to their morphology and well-defined geometry with flat, coplanar surfaces/interfaces, novel phenomena may be observed in thin films. Prominent examples are the eye-catching hydrogen switchable mirror effect, the visualization of solid-state diffusion and the formation of complex surface morphologies. Thin films do not suffer as much from embrittlement and/or decrepitation as bulk materials, allowing the study of cyclic absorption and desorption. Therefore, thin-metal hydride films are used as model systems to study metal-insulator transitions, for high throughput combinatorial research or they may be used as indicator layers to study hydrogen diffusion. They can be found in technological applications as hydrogen sensors, in electrochromic and thermochromic devices. In this review, we discuss the effect of hydrogen loading of thin niobium and yttrium films as archetypical examples of a transition metal and a rare earth metal, respectively. Our focus thereby lies on the hydrogen induced changes of the electronic structure and the morphology of the thin films, their optical properties, the visualization and the control of hydrogen diffusion and on the study of surface phenomena and catalysis.

  15. High H- ionic conductivity in barium hydride

    Science.gov (United States)

    Verbraeken, Maarten C.; Cheung, Chaksum; Suard, Emmanuelle; Irvine, John T. S.

    2015-01-01

    With hydrogen being seen as a key renewable energy vector, the search for materials exhibiting fast hydrogen transport becomes ever more important. Not only do hydrogen storage materials require high mobility of hydrogen in the solid state, but the efficiency of electrochemical devices is also largely determined by fast ionic transport. Although the heavy alkaline-earth hydrides are of limited interest for their hydrogen storage potential, owing to low gravimetric densities, their ionic nature may prove useful in new electrochemical applications, especially as an ionically conducting electrolyte material. Here we show that barium hydride shows fast pure ionic transport of hydride ions (H-) in the high-temperature, high-symmetry phase. Although some conductivity studies have been reported on related materials previously, the nature of the charge carriers has not been determined. BaH2 gives rise to hydride ion conductivity of 0.2 S cm-1 at 630 °C. This is an order of magnitude larger than that of state-of-the-art proton-conducting perovskites or oxide ion conductors at this temperature. These results suggest that the alkaline-earth hydrides form an important new family of materials, with potential use in a number of applications, such as separation membranes, electrochemical reactors and so on.

  16. From Abstract Art to Abstracted Artists

    Directory of Open Access Journals (Sweden)

    Romi Mikulinsky

    2016-11-01

    Full Text Available What lineage connects early abstract films and machine-generated YouTube videos? Hans Richter’s famous piece Rhythmus 21 is considered to be the first abstract film in the experimental tradition. The Webdriver Torso YouTube channel is composed of hundreds of thousands of machine-generated test patterns designed to check frequency signals on YouTube. This article discusses geometric abstraction vis-à-vis new vision, conceptual art and algorithmic art. It argues that the Webdriver Torso is an artistic marvel indicative of a form we call mathematical abstraction, which is art performed by computers and, quite possibly, for computers.

  17. Niche applications of metal hydrides and related thermal management issues

    Energy Technology Data Exchange (ETDEWEB)

    Lototskyy, M., E-mail: mlototskyy@uwc.ac.za [HySA Systems Competence Centre, South African Institute for Advanced Materials Chemistry, Faculty of Natural Sciences, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Satya Sekhar, B. [HySA Systems Competence Centre, South African Institute for Advanced Materials Chemistry, Faculty of Natural Sciences, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Muthukumar, P. [Mechanical Department, Indian Institute of Technology Guwahati, Guwahati 781039 (India); Linkov, V.; Pollet, B.G. [HySA Systems Competence Centre, South African Institute for Advanced Materials Chemistry, Faculty of Natural Sciences, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa)

    2015-10-05

    Highlights: • MH H{sub 2} storage, compression & heat management: developments/thermal management. • Thermodynamic criteria for proper selection of MH for different gas phase applications. • Factors influencing on H{sub 2} charge/discharge dynamic performance and energy efficiency. • The improvement of MH heat transfer characteristics is crucial. • Ways of improvement of heat transfer in the MH systems. - Abstract: This short review highlights and discusses the recent developments and thermal management issues related to metal hydride (MH) systems for hydrogen storage, hydrogen compression and heat management (refrigeration, pump and upgrade, etc.). Special attention is paid to aligning the system features with the requirements of the specific application. The considered system features include the MH material, the MH bed on the basis of its corresponding MH container, as well as the layout of the integrated system.

  18. Atom probe analysis of titanium hydride precipitates.

    Science.gov (United States)

    Takahashi, J; Kawakami, K; Otsuka, H; Fujii, H

    2009-04-01

    It is expected that the three-dimensional atom probe (3DAP) will be used as a tool to visualize the atomic scale of hydrogen atoms in steel is expected, due to its high spatial resolution and very low detection limit. In this paper, the first 3DAP analysis of titanium hydride precipitates in metal titanium is reported in terms of the quantitative detection of hydrogen. FIB fabrication techniques using the lift-out method have enabled the production of needle tips of hydride precipitates, of several tens of microns in size, within a titanium matrix. The hydrogen concentration estimated from 3DAP analysis was slightly smaller than that of the hydride phase predicted from the phase diagram. We discuss the origin of the difference between the experimental and predicted values and the performance of 3DAP for the quantitative detection of hydrogen.

  19. Hydrogen storage in complex metal hydrides

    Directory of Open Access Journals (Sweden)

    BORISLAV BOGDANOVIĆ

    2009-02-01

    Full Text Available Complex metal hydrides such as sodium aluminohydride (NaAlH4 and sodium borohydride (NaBH4 are solid-state hydrogen-storage materials with high hydrogen capacities. They can be used in combination with fuel cells as a hydrogen source thus enabling longer operation times compared with classical metal hydrides. The most important point for a wide application of these materials is the reversibility under moderate technical conditions. At present, only NaAlH4 has favourable thermodynamic properties and can be employed as a thermally reversible means of hydrogen storage. By contrast, NaBH4 is a typical non- -reversible complex metal hydride; it reacts with water to produce hydrogen.

  20. Iron Group Hydrides in Noyori Bifunctional Catalysis.

    Science.gov (United States)

    Morris, Robert H

    2016-12-01

    This is an overview of the hydride-containing catalysts prepared in the Morris group for the efficient hydrogenation of simple ketones, imines, nitriles and esters and the asymmetric hydrogenation and transfer hydrogenation of prochiral ketones and imines. The work was inspired by and makes use of Noyori metal-ligand bifunctional concepts involving the hydride-ruthenium amine-hydrogen HRuNH design. It describes the synthesis and some catalytic properties of hydridochloro, dihydride and amide complexes of ruthenium and in one case, osmium, with monodentate, bidentate and tetradentate phosphorus and nitrogen donor ligands. The iron hydride that has been identified in a very effective asymmetric transfer hydrogenation process is also mentioned. The link between the HMNH structure and the sense of enantioinduction is demonstrated by use of simple transition state models.

  1. Investigations of the structural stability of metal hydride composites by in-situ neutron imaging

    Science.gov (United States)

    Herbrig, Kai; Pohlmann, Carsten; Gondek, Łukasz; Figiel, Henryk; Kardjilov, Nikolay; Hilger, André; Manke, Ingo; Banhart, John; Kieback, Bernd; Röntzsch, Lars

    2015-10-01

    Metal hydride composites (MHC) with expanded natural graphite (ENG) exhibiting enhanced thermal conductivity and reduced porosity compared to metal hydride powders can enable a reversible, compact and safe way for hydrogen storage. In this study, neutron imaging during cyclic hydrogenation was utilized to investigate the structural stability and the spatial-temporal hydrogen concentration of application-oriented MHC with 40 mm in diameter compared to a loose metal hydride powder. In particular, swelling and shrinking effects of a radially confined MHC which could freely expand upwards were studied. It was found that the loose powder bed was easily torn apart during dehydrogenation, which leads to increased thermal resistance within the hydride bed. In contrast, the thermal resistance between MHC and container wall was minimized since the initial gap closes during initial hydrogenation and does not reopen thereafter. Further cyclic hydrogenation caused MHC volume changes, i.e. an almost reversible swelling/shrinking (so-called ;MHC breathing;). Moreover, neutron imaging allowed for the observation of reaction fronts within the MHC and the powder bed that are governed by the heat transfer.

  2. Understanding of Hydriding Mechanisms of Zircaloy-4 Alloy during Corrosion in PWR Simulated Conditions and Influence of Zirconium Hydrides on Zircaloy-4 Corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Bisor-Melloul, C.; Tupin, M.; Bossis, P.; Chene, J.; Bechade, J.L. [CEA Saclay, 91 - Gif sur Yvette (France); Motta, A. [Pennsylvania State Univ. (United States)

    2011-03-15

    species through grain boundaries of zirconia. Moreover, during oxidation, the hydrogen initially present in the hydride phase remains in the metallic matrix and leads to the allotropic transformation {delta}-ZrH{sub 1,66} {yields} {epsilon}-ZrH{sub 2}. (authors)

  3. Evidence of stress-induced hydrogen ordering in zirconium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Steuwer, A. [FaME38 at the ESRF-ILL, 6 rue J Horowitz, 38042 Grenoble (France); ESS Scandinavia, University of Lund, Stora Algatan 4, 22350 Lund (Sweden)], E-mail: steuwer@ill.fr; Santisteban, J.R. [Centro Atomico Bariloche, CNEA, San Carlos de Bariloche (Argentina); Preuss, M. [University of Manchester, Grosvenor Street, Manchester M1 7HS (United Kingdom); Peel, M.J.; Buslaps, T. [European Synchrotron Radiation Facility, 6 rue J Horowitz, 38042 Grenoble (France); Harada, M. [R and D Section, Chofu-Kita Plant, Kobe Special Tube Co, Shimonoseki 752-0953 (Japan)

    2009-01-15

    The formation of hydrides in zirconium alloys significantly affects their mechanical properties and is considered to play a critical role in their failure mechanisms, yet relatively little is known about the micromechanical behavior of hydrides in the bulk. This paper presents the result of in situ uniaxial mechanical tensioning experiments on hydrided zircaloy-2 and zircaloy-4 specimens using energy-dispersive synchrotron X-ray diffraction, which suggests that a stress-induced transformation of the {delta}-hydride to {gamma}-hydride via ordering of the hydrogen atoms occurs, akin to a Snoek-type relaxation. Subsequent annealing was found to reverse the ordering phenomenon.

  4. Abstract Storage Devices

    CERN Document Server

    Koenig, Robert; Tessaro, Stefano

    2007-01-01

    A quantum storage device differs radically from a conventional physical storage device. Its state can be set to any value in a certain (infinite) state space, but in general every possible read operation yields only partial information about the stored state. The purpose of this paper is to initiate the study of a combinatorial abstraction, called abstract storage device (ASD), which models deterministic storage devices with the property that only partial information about the state can be read, but that there is a degree of freedom as to which partial information should be retrieved. This concept leads to a number of interesting problems which we address, like the reduction of one device to another device, the equivalence of devices, direct products of devices, as well as the factorization of a device into primitive devices. We prove that every ASD has an equivalent ASD with minimal number of states and of possible read operations. Also, we prove that the reducibility problem for ASD's is NP-complete, that t...

  5. The oxidation of uranium hydride during its instantaneous or gradual exposure to oxygen

    Energy Technology Data Exchange (ETDEWEB)

    Glascott, J., E-mail: joe.glascott@awe.co.uk; Findlay, I.M.

    2015-11-15

    The oxidation behaviour of uranium hydride when exposed to oxygen gas either gradually or instantaneously at an ambient temperature of approximately 37 °C has been investigated. The proportion of the sample converted to oxide and the mean hydride mound temperature rise accompanying the oxidation process were recorded. Pressure changes in the reaction cell were used to deduce the nature of the oxide generated during the oxidation process and the nature of the gaseous reaction products. For the gradual oxidation of the hydride, typically only about 15% of the hydride mass was converted to oxide during the initial period of oxidation defined by an observed temperature excursion lasting a finite time; during this oxidation period it is concluded that, despite the only moderate recoded mean temperature rises, the generated oxide is U{sub 3}O{sub 8} rather than UO{sub 2}. Typically also for such gradual exposure experiments, hydrogen was the principal gaseous reaction product with negligible water being produced. For the instantaneous exposure of the hydride to oxygen, much higher hydride mound mean temperature rises were recorded but the proportion of hydride converted to oxide was quite variable and apparently dependent on several experimental variables; for these experiments, although hydrogen was a major reaction product typically some water was also produced. The boundary between pyrophoric and non-pyrophoric oxidation of uranium hydride for given oxidising conditions is discussed in terms of a calculated particle “thermal runaway temperature”. - Highlights: • Only about 15% of UH{sub 3} is oxidised on its gradual exposure to oxygen. • During the gradual exposure of UH{sub 3} to oxygen U{sub 3}O{sub 8} rather than UO{sub 2} is generated. • For such gradual exposure, predominantly H{sub 2} rather than H{sub 2}O was generated. • For the instantaneous exposure of UH{sub 3} to O{sub 2} the amount oxidised was variable. • For these experiments, H{sub 2

  6. A LARI Experience (Abstract)

    Science.gov (United States)

    Cook, M.

    2015-12-01

    (Abstract only) In 2012, Lowell Observatory launched The Lowell Amateur Research Initiative (LARI) to formally involve amateur astronomers in scientific research by bringing them to the attention of and helping professional astronomers with their astronomical research. One of the LARI projects is the BVRI photometric monitoring of Young Stellar Objects (YSOs), wherein amateurs obtain observations to search for new outburst events and characterize the colour evolution of previously identified outbursters. A summary of the scientific and organizational aspects of this LARI project, including its goals and science motivation, the process for getting involved with the project, a description of the team members, their equipment and methods of collaboration, and an overview of the programme stars, preliminary findings, and lessons learned is presented.

  7. PRISMA for Abstracts

    DEFF Research Database (Denmark)

    Beller, Elaine M; Glasziou, Paul P; Altman, Douglas G;

    2013-01-01

    Elaine Beller and colleagues from the PRISMA for Abstracts group provide a reporting guidelines for reporting abstracts of systematic reviews in journals and at conferences.......Elaine Beller and colleagues from the PRISMA for Abstracts group provide a reporting guidelines for reporting abstracts of systematic reviews in journals and at conferences....

  8. Structural and magnetic transformations in NdMn{sub 2}H{sub x} hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Budziak, A., E-mail: andrzej.budziak@ifj.edu.pl [H. Niewodniczanski Institute of Nuclear Physics PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Zachariasz, P. [Faculty of Physics and Applied Computer Science, AGH, University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow (Poland); Pelka, R. [The H. Niewodniczanski Institute of Nuclear Physics PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Figiel, H.; Zukrowski, J.; Woch, M.W. [Faculty of Physics and Applied Computer Science, AGH, University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow (Poland)

    2012-06-05

    Highlights: Black-Right-Pointing-Pointer Full structural phase diagram is presented for the NdMn{sub 2}H{sub x} (2.0 {<=} x {<=} 4.0) hydrides in the temperature range of 70-385 K. Black-Right-Pointing-Pointer For samples x = 2.0, 2.5, and 4.0 a splitting into two phases with different hydrogen concentrations are observed. Black-Right-Pointing-Pointer Only for samples with x = 3.0 and 3.5 no spinodal decompositions are detected. Black-Right-Pointing-Pointer The effects of hydrogen absorption on structural properties are shown to be reflected in magnetic behavior. Black-Right-Pointing-Pointer A huge jump of magnetic ordering temperatures from {approx}104 K for host NdMn{sub 2} to above 200 K for its hydrides is observed or anticipated. - Abstract: X-ray powder diffraction and bulk magnetization measurements were used to study structural and magnetic properties of hydrides NdMn{sub 2}H{sub x} (2.0 {<=} x {<=} 4.0). The X-ray investigations performed in the temperature range 70-385 K have revealed many structural transformations at low temperatures. In particular, a transformation from the hexagonal to the monoclinic phase and spinodal decompositions were observed. The magnetic behavior of the hydrides is correlated with the structural transitions. A tentative structural diagram is presented. The obtained results are compared with the properties of other cubic and hexagonal RMn{sub 2}H{sub x} hydrides.

  9. Application of hafnium hydride control rod to large sodium cooled fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, Kazumi, E-mail: kazumi_ikeda@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Moriwaki, Hiroyuki, E-mail: hiroyuki_moriwaki@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Ohkubo, Yoshiyuki, E-mail: yoshiyuki_okubo@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Iwasaki, Tomohiko, E-mail: tomohiko.iwasaki@qse.tohoku.ac.jp [Department of Quantum Science and Energy Engineering, Tohoku University, Aoba, Aramaki, Aoba-ku, Sendai-shi, Miyagi-ken 980-8579 (Japan); Konashi, Kenji, E-mail: konashi@imr.tohoku.ac.jp [Institute for Materials Research, Tohoku University, Narita-cho, Oarai-machi, Higashi-Ibaraki-gun, Ibaraki-ken 311-1313 (Japan)

    2014-10-15

    Highlights: • Application of hafnium hydride control rod to large sodium cooled fast breeder reactor. • This paper treats application of an innovative hafnium hydride control rod to a large sodium cooled fast breeder reactor. • Hydrogen absorption triples the reactivity worth by neutron spectrum shift at H/Hf ratio of 1.3. • Lifetime of the control rod quadruples because produced daughters of hafnium isotopes are absorbers. • Nuclear and thermal hydraulic characteristics of the reactor are as good as or better than B-10 enriched boron carbide. - Abstract: This study treats the feasibility of long-lived hafnium hydride control rod in a large sodium-cooled fast breeder reactor by nuclear and thermal analyses. According to the nuclear calculations, it is found that hydrogen absorption of hafnium triples the reactivity by the neutron spectrum shift at the H/Hf ratio of 1.3, and a hafnium transmutation mechanism that produced daughters are absorbers quadruples the lifetime due to a low incineration rate of absorbing nuclides under irradiation. That is to say, the control rod can function well for a long time because an irradiation of 2400 EFPD reduces the reactivity by only 4%. The calculation also reveals that the hafnium hydride control rod can apply to the reactor in that nuclear and thermal characteristics become as good as or better than 80% B-10 enriched boron carbide. For example, the maximum linear heat rate becomes 3% lower. Owing to the better power distribution, the required flow rate decreases approximately by 1%. Consequently, it is concluded on desk analyses that the long lived hafnium hydride control rod is feasible in the large sodium-cooled fast breeder reactor.

  10. Hydride formation on deformation twin in zirconium alloy

    Science.gov (United States)

    Kim, Ju-Seong; Kim, Sung-Dae; Yoon, Jonghun

    2016-12-01

    Hydrides deteriorate the mechanical properties of zirconium (Zr) alloys used in nuclear reactors. Intergranular hydrides that form along grain boundaries have been extensively studied due to their detrimental effects on cracking. However, it has been little concerns on formation of Zr hydrides correlated with deformation twins which is distinctive heterogeneous nucleation site in hexagonal close-packed metals. In this paper, the heterogeneous precipitation of Zr hydrides at the twin boundaries was visualized using transmission electron microscopy. It demonstrates that intragranular hydrides in the twinned region precipitates on the rotated habit plane by the twinning and intergranular hydrides precipitate along the coherent low energy twin boundaries independent of the conventional habit planes. Interestingly, dislocations around the twin boundaries play a substantial role in the nucleation of Zr hydrides by reducing the misfit strain energy.

  11. Electronic Principles of Hydrogen Incorporation and Dynamics in Metal Hydrides

    Directory of Open Access Journals (Sweden)

    Ljiljana Matović

    2012-08-01

    Full Text Available An approach to various metal hydrides based on electronic principles is presented. The effective medium theory (EMT is used to illustrate fundamental aspects of metal-hydrogen interaction and clarify the most important processes taking place during the interaction. The elaboration is extended using the numerous existing results of experiment and calculations, as well as using some new material. In particular, the absorption/desorption of H in the Mg/MgH2 system is analyzed in detail, and all relevant initial structures and processes explained. Reasons for the high stability and slow sorption in this system are noted, and possible solutions proposed. The role of the transition-metal impurities in MgH2 is briefly discussed, and some interesting phenomena, observed in complex intermetallic compounds, are mentioned. The principle mechanism governing the Li-amide/imide transformation is also discussed. Latterly, some perspectives for the metal-hydrides investigation from the electronic point of view are elucidated.

  12. Destabilization of magnesium hydride through interface engineering

    NARCIS (Netherlands)

    Mooij, L.P.A.

    2013-01-01

    The aim of this thesis is to study the thermodynamics of hydrogenation of nanoconfined magnesium within a thin film multilayer model system. Magnesium hydride is a potential material for hydrogen storage, which is a key component in a renewable energy system based on hydrogen. In bulk form,

  13. Destabilization of magnesium hydride through interface engineering

    NARCIS (Netherlands)

    Mooij, L.P.A.

    2013-01-01

    The aim of this thesis is to study the thermodynamics of hydrogenation of nanoconfined magnesium within a thin film multilayer model system. Magnesium hydride is a potential material for hydrogen storage, which is a key component in a renewable energy system based on hydrogen. In bulk form, magnesiu

  14. Destabilization of magnesium hydride through interface engineering

    NARCIS (Netherlands)

    Mooij, L.P.A.

    2013-01-01

    The aim of this thesis is to study the thermodynamics of hydrogenation of nanoconfined magnesium within a thin film multilayer model system. Magnesium hydride is a potential material for hydrogen storage, which is a key component in a renewable energy system based on hydrogen. In bulk form, magnesiu

  15. Hydrogen concentration limit and critical temperatures for delayed hydride cracking in zirconium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Shi, S.Q. [Atomic Energy of Canada Ltd., Pinawa, Manitoba (Canada). Mater. and Mech. Branch; Shek, G.K. [Materials Technology Unit, Ontario Hydro Technologies, 800 Kipling Avenue, Toronto, Ontario (Canada); Puls, M.P. [Atomic Energy of Canada Ltd., Pinawa, Manitoba (Canada). Mater. and Mech. Branch

    1995-02-01

    An experimental study was carried out to determine the hydrogen concentration limit as a function of temperature at which delayed hydride cracking (DHC) commences in Zr-2.5Nb pressure tube material. For a given hydrogen content of the specimen, two critical temperatures were observed in this work - a DHC initiation temperature, T{sub c}, at which DHC would initiate when approaching the test temperature from above the solvus (or terminal solid solubility) for hydride dissolution (TSSD) and a DHC arrest temperature, T{sub h}, obtained by heating the same specimen from T{sub c} after DHC had started. Both of T{sub c} and T{sub h} are close to, but below, the temperatures defined by TSSD for the specific hydrogen content of the specimen. A theoretical analysis was carried out to quantitatively derive the hydrogen concentration limit and these critical temperatures. The theoretical prediction for T{sub c} depends sensitively on the particular solvus or terminal solid solubility curve for hydride precipitation (TSSP) used, since there is a wide range of values for TSSP depending on the thermal-mechanical history of the material. It is also suggested that T{sub h} is governed by the TSSP for hydride growth, in contrast to T{sub c}, which is governed by the TSSP for hydride nucleation. A model for a previously observed critical temperature (T{sub A}) is also proposed. T{sub A} is a DHC arrest temperature, obtained by approaching the test temperature from a lower temperature. The model suggests that T{sub A} is controlled by the energy difference between TSSD, TSSP and the hydrostatic stress at the crack tip. ((orig.))

  16. Catalyzed light hydride nanomaterials embedded in a micro-channels hydrogen storage container.

    Science.gov (United States)

    Dehouche, Zahir; Peretti, Hernán A; Yoo, Yeong; Belkacemi, Khaled; Goyette, Jacques

    2009-01-01

    Activated alloys synthesized by arc-melting were examined as catalysts for improving the hydrogen sorption characteristics of nanostructured magnesium hydride, proposed as a reversible hydrogen storage material. The MgH(2)-catalyst absorbing materials were prepared by ball milling of pure MgH(2) with hydrided Zr(47)Ni(53), Zr(9)Ni(11), and other alloys investigated. The nanostructured MgH(2)-intermetallic systems were tested at 250 degrees C and catalyst addition of eutectoid Zr(47)Ni(53) resulted in the fastest desorption time and highest initial desorption rate. The catalyzed Mg-hydride with activated Zr(9)Ni(11) and Zr(7)Ni(10) phases showed fast desorption kinetics. Moreover, the results demonstrated that the composition of dispersed Zr(x)Ni(y)catalysts has a strong influence on the amount of accumulated hydrogen and desorption rate of Mg-nanocomposite. Part two covers advanced micro-channels hydrogen storage module design based on the results of semi-empirical computer simulations of heat and mass transfers in the container. The micro-channels reservoir concept offers many advantages over the conventional metal hydride hydrogen storage system. It is a micro-structured system that can pack a lot of power into a small space and dissipate effectively the heat of the sorption reactions. This review summarizes recent patents related to CNTS.

  17. The development of nickel-metal hydride technology for use in aerospace applications

    Science.gov (United States)

    Rampel, Guy; Johnson, Herschel; Dell, Dan; Wu, Tony; Puglisi, Vince

    1992-01-01

    The nickel metal hydride technology for battery application is relatively immature even though this technology was made widely known by Philips' scientists as long ago as 1970. Recently, because of the international environmental regulatory pressures being placed on cadmium in the workplace and in disposal practices, battery companies have initiated extensive development programs to make this technology a viable commercial operation. These hydrides do not pose a toxilogical threat as does cadmium. Also, they provide a higher energy density and specific energy when compared to the other nickel based battery technologies. For these reasons, the nickel metal hydride electrochemisty is being evaluated as the next power source for varied applications such as laptop computers, cellular telephones, electric vehicles, and satellites. A parallel development effort is under way to look at aerospace applications for nickel metal hydride cells. This effort is focused on life testing of small wound cells of the commercial type to validate design options and development of prismatic design cells for aerospace applications.

  18. Introduction to abstract algebra

    CERN Document Server

    Nicholson, W Keith

    2012-01-01

    Praise for the Third Edition ". . . an expository masterpiece of the highest didactic value that has gained additional attractivity through the various improvements . . ."-Zentralblatt MATH The Fourth Edition of Introduction to Abstract Algebra continues to provide an accessible approach to the basic structures of abstract algebra: groups, rings, and fields. The book's unique presentation helps readers advance to abstract theory by presenting concrete examples of induction, number theory, integers modulo n, and permutations before the abstract structures are defined. Readers can immediately be

  19. Abstraction and Consolidation

    Science.gov (United States)

    Monaghan, John; Ozmantar, Mehmet Fatih

    2006-01-01

    The framework for this paper is a recently developed theory of abstraction in context. The paper reports on data collected from one student working on tasks concerned with absolute value functions. It examines the relationship between mathematical constructions and abstractions. It argues that an abstraction is a consolidated construction that can…

  20. Abstraction and Problem Reformulation

    Science.gov (United States)

    Giunchiglia, Fausto

    1992-01-01

    In work done jointly with Toby Walsh, the author has provided a sound theoretical foundation to the process of reasoning with abstraction (GW90c, GWS9, GW9Ob, GW90a). The notion of abstraction formalized in this work can be informally described as: (property 1), the process of mapping a representation of a problem, called (following historical convention (Sac74)) the 'ground' representation, onto a new representation, called the 'abstract' representation, which, (property 2) helps deal with the problem in the original search space by preserving certain desirable properties and (property 3) is simpler to handle as it is constructed from the ground representation by "throwing away details". One desirable property preserved by an abstraction is provability; often there is a relationship between provability in the ground representation and provability in the abstract representation. Another can be deduction or, possibly inconsistency. By 'throwing away details' we usually mean that the problem is described in a language with a smaller search space (for instance a propositional language or a language without variables) in which formulae of the abstract representation are obtained from the formulae of the ground representation by the use of some terminating rewriting technique. Often we require that the use of abstraction results in more efficient .reasoning. However, it might simply increase the number of facts asserted (eg. by allowing, in practice, the exploration of deeper search spaces or by implementing some form of learning). Among all abstractions, three very important classes have been identified. They relate the set of facts provable in the ground space to those provable in the abstract space. We call: TI abstractions all those abstractions where the abstractions of all the provable facts of the ground space are provable in the abstract space; TD abstractions all those abstractions wllere the 'unabstractions' of all the provable facts of the abstract space are

  1. Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner

    Energy Technology Data Exchange (ETDEWEB)

    Qin, Feng; Chen, Jiangping; Chen, Zhijiu [Institute of Refrigeration and Cryogenics Engineering, Shanghai Jiaotong University, Shanghai 200030 (China); Lu, Manqi; Yang, Ke [Engineering Center, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, Liaoning Province 110016 (China); Zhou, Yimin [Research Center, Zhejiang Yinlun Machinery Co. Ltd., Tiantai County, Zhejiang Province 317200 (China)

    2007-10-15

    Aiming at developing exhaust gas-driven automobile air conditioners, two types of systems varying in heat carriers were preliminarily designed. A new hydride pair LaNi{sub 4.61}Mn{sub 0.26}Al{sub 0.13}/La{sub 0.6}Y{sub 0.4}Ni{sub 4.8}Mn{sub 0.2} was developed working at 120-200 C/20-50 C/-10-0 C. P-C isotherms and reaction kinetics were tested. Reaction enthalpy, entropy and theoretical cycling coefficient of performance (COP) were deducted from Van't-Hoff diagram. Test results showed that the hydride pair has flat plateau slopes, fast reaction dynamics and small hystereses; the reaction enthalpy of the refrigeration hydride is -27.1 kJ/mol H{sub 2} and system theoretical COP is 0.711. Mean particle sizes during cycles were verified to be an intrinsic property affected by constitution, heat treatment and cycle numbers rather than initial grain sizes. Based on this work pair, cylindrical reactors were designed and a function proving metal hydride intermittent refrigeration system was constructed with heat conducting oil as heat source and water as heat sink. The reactor equivalent thermal conductivity is merely 1.3 W/(m K), which still has not meet practical requirement. Intermittent refrigeration cycles were achieved and the average cooling power is 84.6 W at 150 C/30 C/0 C with COP being 0.26. The regulations of cycling performance and minimum refrigeration temperature (MRT) were determined by altering heat source temperature. Results showed that cooling power and system COP increase while MRT decreases with the growth of heat source temperature. This study develops a new hydride pair and confirms its application in automobile refrigeration systems, while their heat transfer properties still need to be improved for better performance. (author)

  2. Ab initio study of H and He migrations in β-phase Sc, Y, and Er hydrides

    Institute of Scientific and Technical Information of China (English)

    Chen Ru-Cheng; Yang Li; Dai Yun-Ya; Zhu Zi-Qiang; Peng Shu-Ming; Long Xing-Gui; Gao Fei; Zu Xiao-Tao

    2012-01-01

    Ab initio calculations based on the density functional theory have been performed to investigate the migrations of hydrogen(H)and helium(He)atoms in β-phase scandium(Sc),yttrium(Y),and erbium(Er)hydrides with three different ratios of H to metal.The results show that the migration mechanisms of H and He atoms mainly depend on the crystal structures of hydrides,but their energy barriers are affected by the host-lattice in metal hydrides.The formation energies of octahedral-occupancy H(Hoct)and tetrahedral vacancy(Vtet)pairs are almost the same(about 1.2 eV).It is of interest to note that the migration barriers of H increase with increasing host-lattice atomic number.In addition,the results show that the favorable migration mechanism of He depends slightly on the Vtet in the Sc hydride,but strongly on that in the Y and Er hydrides,which may account for different behaviours of initial He release from ScT2 and ErT2.

  3. Stellar Presentations (Abstract)

    Science.gov (United States)

    Young, D.

    2015-12-01

    (Abstract only) The AAVSO is in the process of expanding its education, outreach and speakers bureau program. powerpoint presentations prepared for specific target audiences such as AAVSO members, educators, students, the general public, and Science Olympiad teams, coaches, event supervisors, and state directors will be available online for members to use. The presentations range from specific and general content relating to stellar evolution and variable stars to specific activities for a workshop environment. A presentation—even with a general topic—that works for high school students will not work for educators, Science Olympiad teams, or the general public. Each audience is unique and requires a different approach. The current environment necessitates presentations that are captivating for a younger generation that is embedded in a highly visual and sound-bite world of social media, twitter and U-Tube, and mobile devices. For educators, presentations and workshops for themselves and their students must support the Next Generation Science Standards (NGSS), the Common Core Content Standards, and the Science Technology, Engineering and Mathematics (STEM) initiative. Current best practices for developing relevant and engaging powerpoint presentations to deliver information to a variety of targeted audiences will be presented along with several examples.

  4. Verification and Validation Strategy for Implementation of Hybrid Potts-Phase Field Hydride Modeling Capability in MBM

    Energy Technology Data Exchange (ETDEWEB)

    Jason D. Hales; Veena Tikare

    2014-04-01

    The Used Fuel Disposition (UFD) program has initiated a project to develop a hydride formation modeling tool using a hybrid Potts­phase field approach. The Potts model is incorporated in the SPPARKS code from Sandia National Laboratories. The phase field model is provided through MARMOT from Idaho National Laboratory.

  5. Numerical study of a magnesium hydride tank

    Science.gov (United States)

    Delhomme, Baptiste; de Rango, Patricia; Marty, Philippe

    2012-11-01

    Hydrogen storage in metal hydride tanks (MHT) is a very promising solution. Several experimental tanks, studied by different teams, have already proved the feasibility and the interesting performances of this solution. However, in much cases, an optimization of tank geometry is still needed in order to perform fast hydrogen loading. The development of efficient numerical tools is a key issue for MHT design and optimization. We propose a simple model representing a metal hydride tank exchanging its heat of reaction with a thermal fluid flow. In this model, the radial and axial discretisations have been decoupled by using Matlab® one-dimensional tools. Calculations are compared to experimental results obtained in a previous study. A good agreement is found for the loading case. The discharging case shows some discrepancies, which are discussed in this paper.

  6. The electrochemical impedance of metal hydride electrodes

    DEFF Research Database (Denmark)

    Valøen, Lars Ole; Lasia, Andrzej; Jensen, Jens Oluf

    2002-01-01

    The electrochemical impedance responses for different laboratory type metal hydride electrodes were successfully modeled and fitted to experimental data for AB5 type hydrogen storage alloys as well as one MgNi type electrode. The models fitted the experimental data remarkably well. Several AC......, explaining the experimental impedances in a wide frequency range for electrodes of hydride forming materials mixed with copper powder, were obtained. Both charge transfer and spherical diffusion of hydrogen in the particles are important sub processes that govern the total rate of the electrochemical...... hydrogen absorption/desorption reaction. To approximate the experimental data, equations describing the current distribution in porous electrodes were needed. Indications of one or more parallel reduction/oxidation processes competing with the electrochemical hydrogen absorption/desorption reaction were...

  7. Synthesis and properties of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride

    Energy Technology Data Exchange (ETDEWEB)

    Verbovytskyy, Yu. [Physico-Mechanical Institute, NAS of Ukraine, 5 Naukova str., 79601 Lviv (Ukraine); Zhang, J.; Cuevas, F.; Paul-Boncour, V. [Institut de Chimie et des Materiaux de Paris Est, CMTR, UMR 7182, CNRS-UPEC, 2-8 rue H. Dunant, 94320 Thiais (France); Zavaliy, I., E-mail: zavaliy@ipm.lviv.ua [Physico-Mechanical Institute, NAS of Ukraine, 5 Naukova str., 79601 Lviv (Ukraine)

    2015-10-05

    Graphical abstract: Crystal structure of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride. - Highlights: • Preparation of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride by reactive ball milling. • Crystal structure determination by X-ray powder diffraction. • Electrochemical studies of the ball milled MH/Ni electrodes. - Abstract: The Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} hydride with a grain size of 16 nm was prepared by reactive ball milling. Its crystal structure was studied by X-ray powder diffraction. A tetragonal Mg{sub 2}CoH{sub 5} structure type was suggested for the obtained hydride. The decomposition temperature of the Mg{sub 2}Ni{sub 0.5}Co{sub 0.5}H{sub 4.4} phase was observed at 213 °C. Electrochemical measurements as negative electrode of Ni–MH battery were also performed. Significant improvements can be made by ball-milling the hydride with nickel powder.

  8. Nickel metal hydride LEO cycle testing

    Science.gov (United States)

    Lowery, Eric

    1995-01-01

    The George C. Marshall Space Flight Center is working to characterize aerospace AB5 Nickel Metal Hydride (NiMH) cells. The cells are being evaluated in terms of storage, low earth orbit (LEO) cycling, and response to parametric testing (high rate charge and discharge, charge retention, pulse current ability, etc.). Cells manufactured by Eagle Picher are the subjects of the evaluation. There is speculation that NiMH cells may become direct replacements for current Nickel Cadmium cells in the near future.

  9. Storing hydrogen in the form of light alloy hydrides

    Science.gov (United States)

    Freund, E.; Gillerm, C.

    1981-01-01

    Different hydrides are investigated to find a system with a sufficiently high storage density (at least 3%). The formation of hydrides with light alloys is examined. Reaction kinetics for hydride formation were defined and applied to the systems Mg-Al-H, Mg-Al-Cu-H, Ti-Al-H, Ti-Al-Cu-H, and Ti-Al-Ni-H. Results indicate that the addition of Al destabilizes MgH2 and TiH2 hydrides while having only a limited effect on the storage density.

  10. Plasmonic hydrogen sensing with nanostructured metal hydrides.

    Science.gov (United States)

    Wadell, Carl; Syrenova, Svetlana; Langhammer, Christoph

    2014-12-23

    In this review, we discuss the evolution of localized surface plasmon resonance and surface plasmon resonance hydrogen sensors based on nanostructured metal hydrides, which has accelerated significantly during the past 5 years. We put particular focus on how, conceptually, plasmonic resonances can be used to study metal-hydrogen interactions at the nanoscale, both at the ensemble and at the single-nanoparticle level. Such efforts are motivated by a fundamental interest in understanding the role of nanosizing on metal hydride formation processes in the quest to develop efficient solid-state hydrogen storage materials with fast response times, reasonable thermodynamics, and acceptable long-term stability. Therefore, a brief introduction to the thermodynamics of metal hydride formation is also given. However, plasmonic hydrogen sensors not only are of academic interest as research tool in materials science but also are predicted to find more practical use as all-optical gas detectors in industrial and medical applications, as well as in a future hydrogen economy, where hydrogen is used as a carbon free energy carrier. Therefore, the wide range of different plasmonic hydrogen sensor designs already available is reviewed together with theoretical efforts to understand their fundamentals and optimize their performance in terms of sensitivity. In this context, we also highlight important challenges to be addressed in the future to take plasmonic hydrogen sensors from the laboratory to real applications in devices, including poisoning/deactivation of the active materials, sensor lifetime, and cross-sensitivity toward other gas species.

  11. Surface modification of titanium hydride with epoxy resin via microwave-assisted ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Ning, Rong [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Chen, Ding, E-mail: ma97chen@hotmail.com [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Zhang, Qianxia [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Bian, Zhibing; Dai, Haixiong; Zhang, Chi [Jiangsu Jinling Special Paint Co., Ltd., Yangzhou 225212 (China)

    2014-10-15

    Highlights: • TiH{sub 2} was modified with epoxy resin by microwave-assisted ball milling. • The epoxy ring was opened under the coupling effect of microwave and ball milling. • Microwave-assisted ball milling improved the compatibility of TiH{sub 2} with epoxy. - Abstract: Surface modification of titanium hydride with epoxy resin was carried out via microwave-assisted ball milling and the products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), thermo-gravimetry (TG) and Fourier transform infrared spectroscopy (FT-IR). A sedimentation test was performed to investigate the compatibility of the modified nano titanium hydride with the epoxy resin. The results show that the epoxy resin molecules were grafted on the surface of nano titanium hydride particles during the microwave-assisted ball milling process, which led to the improvement of compatibility between the nanoparticles and epoxy resin. According to the FT-IR, the grafting site was likely to be located around the epoxy group due to the fact that the epoxy ring was opened. However, compared with microwave-assisted ball milling, the conventional ball milling could not realize the surface modification, indicating that the coupling effect of mechanical force and microwave played a key role during the process.

  12. Abstracts--Citations

    Science.gov (United States)

    Occupational Mental Health, 1972

    1972-01-01

    Provides abstracts and citations of journal articles and reports dealing with aspects of mental health. Topics include absenteeism, alcoholism, drug abuse, leisure, disadvantaged, job satisfaction, and others. (SB)

  13. Truthful Monadic Abstractions

    DEFF Research Database (Denmark)

    Brock-Nannestad, Taus; Schürmann, Carsten

    2012-01-01

    indefinitely, finding neither a proof nor a disproof of a given subgoal. In this paper we characterize a family of truth-preserving abstractions from intuitionistic first-order logic to the monadic fragment of classical first-order logic. Because they are truthful, these abstractions can be used to disprove...

  14. Completeness of Lyapunov Abstraction

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Sloth, Christoffer

    2013-01-01

    This paper addresses the generation of complete abstractions of polynomial dynamical systems by timed automata. For the proposed abstraction, the state space is divided into cells by sublevel sets of functions. We identify a relation between these functions and their directional derivatives along...

  15. Knowledge-Based Abstracting.

    Science.gov (United States)

    Black, William J.

    1990-01-01

    Discussion of automatic abstracting of technical papers focuses on a knowledge-based method that uses two sets of rules. Topics discussed include anaphora; text structure and discourse; abstracting techniques, including the keyword method and the indicator phrase method; and tools for text skimming. (27 references) (LRW)

  16. Completeness of Lyapunov Abstraction

    Directory of Open Access Journals (Sweden)

    Rafael Wisniewski

    2013-08-01

    Full Text Available In this work, we continue our study on discrete abstractions of dynamical systems. To this end, we use a family of partitioning functions to generate an abstraction. The intersection of sub-level sets of the partitioning functions defines cells, which are regarded as discrete objects. The union of cells makes up the state space of the dynamical systems. Our construction gives rise to a combinatorial object - a timed automaton. We examine sound and complete abstractions. An abstraction is said to be sound when the flow of the time automata covers the flow lines of the dynamical systems. If the dynamics of the dynamical system and the time automaton are equivalent, the abstraction is complete. The commonly accepted paradigm for partitioning functions is that they ought to be transversal to the studied vector field. We show that there is no complete partitioning with transversal functions, even for particular dynamical systems whose critical sets are isolated critical points. Therefore, we allow the directional derivative along the vector field to be non-positive in this work. This considerably complicates the abstraction technique. For understanding dynamical systems, it is vital to study stable and unstable manifolds and their intersections. These objects appear naturally in this work. Indeed, we show that for an abstraction to be complete, the set of critical points of an abstraction function shall contain either the stable or unstable manifold of the dynamical system.

  17. Designing for Mathematical Abstraction

    Science.gov (United States)

    Pratt, Dave; Noss, Richard

    2010-01-01

    Our focus is on the design of systems (pedagogical, technical, social) that encourage mathematical abstraction, a process we refer to as "designing for abstraction." In this paper, we draw on detailed design experiments from our research on children's understanding about chance and distribution to re-present this work as a case study in designing…

  18. Completeness of Lyapunov Abstraction

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Sloth, Christoffer

    2013-01-01

    This paper addresses the generation of complete abstractions of polynomial dynamical systems by timed automata. For the proposed abstraction, the state space is divided into cells by sublevel sets of functions. We identify a relation between these functions and their directional derivatives along...

  19. Data Abstraction in GLISP.

    Science.gov (United States)

    Novak, Gordon S., Jr.

    GLISP is a high-level computer language (based on Lisp and including Lisp as a sublanguage) which is compiled into Lisp. GLISP programs are compiled relative to a knowledge base of object descriptions, a form of abstract datatypes. A primary goal of the use of abstract datatypes in GLISP is to allow program code to be written in terms of objects,…

  20. Nuclear medicine. Abstracts; Nuklearmedizin 2000. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2000-07-01

    This issue of the journal contains the abstracts of the 183 conference papers as well as 266 posters presented at the conference. Subject fields covered are: Neurology, psychology, oncology, pediatrics, radiopharmacy, endocrinology, EDP, measuring equipment and methods, radiological protection, cardiology, and therapy. (orig./CB) [German] Die vorliegende Zeitschrift enthaelt die Kurzfassungen der 183 auf der Tagung gehaltenen Vortraege sowie der 226 praesentierten Poster, die sich mit den folgenden Themen befassten: Neurologie, Psychiatrie, Onkologie, Paediatrie, Radiopharmazie, Endokrinologie, EDV, Messtechnik, Strahlenschutz, Kardiologie sowie Therapie. (MG)

  1. Crack growth through the thickness of thin-sheet Hydrided Zircaloy-4

    Science.gov (United States)

    Raynaud, Patrick A. C.

    In recent years, the limits on fuel burnup have been increased to allow an increase in the amount of energy produced by a nuclear fuel assembly thus reducing waste volume and allowing greater capacity factors. As a result, it is paramount to ensure safety after longer reactor exposure times in the case of design-basis accidents, such as reactivity-initiated accidents (RIA). Previously proposed failure criteria do not directly address the particular cladding failure mechanism during a RIA, in which crack initiation in brittle outer-layers is immediately followed by crack growth through the thickness of the thin-wall tubing. In such a case, the fracture toughness of hydrided thin-wall cladding material must be known for the conditions of through-thickness crack growth in order to predict the failure of high-burnup cladding. The fracture toughness of hydrided Zircaloy-4 in the form of thin-sheet has been examined for the condition of through-thickness crack growth as a function of hydride content and distribution at 25°C, 300°C, and 375°C. To achieve this goal, an experimental procedure was developed in which a linear hydride blister formed across the width of a four-point bend specimen was used to inject a sharp crack that was subsequently extended by fatigue pre-cracking. The electrical potential drop method was used to monitor the crack length during fracture toughness testing, thus allowing for correlation of the load-displacement record with the crack length. Elastic-plastic fracture mechanics were used to interpret the experimental test results in terms of fracture toughness, and J-R crack growth resistance curves were generated. Finite element modeling was performed to adapt the classic theories of fracture mechanics applicable to thick-plate specimens to the case of through-thickness crack growth in thin-sheet materials, and to account for non-uniform crack fronts. Finally, the hydride microstructure was characterized in the vicinity of the crack tip by

  2. Abstract Acceleration of General Linear Loops

    OpenAIRE

    2014-01-01

    International audience; We present abstract acceleration techniques for computing loop invariants for numerical programs with linear assignments and conditionals. Whereas abstract interpretation techniques typically over-approximate the set of reachable states iteratively, abstract acceleration captures the effect of the loop with a single, non-iterative transfer function applied to the initial states at the loop head. In contrast to previous acceleration techniques, our approach applies to a...

  3. Method of making crack-free zirconium hydride

    Science.gov (United States)

    Sullivan, Richard W.

    1980-01-01

    Crack-free hydrides of zirconium and zirconium-uranium alloys are produced by alloying the zirconium or zirconium-uranium alloy with beryllium, or nickel, or beryllium and scandium, or nickel and scandium, or beryllium and nickel, or beryllium, nickel and scandium and thereafter hydriding.

  4. Hydrogen storage in the form of metal hydrides

    Science.gov (United States)

    Zwanziger, M. G.; Santana, C. C.; Santos, S. C.

    1984-01-01

    Reversible reactions between hydrogen and such materials as iron/titanium and magnesium/ nickel alloy may provide a means for storing hydrogen fuel. A demonstration model of an iron/titanium hydride storage bed is described. Hydrogen from the hydride storage bed powers a converted gasoline electric generator.

  5. Electrochemical and Optical Properties of Magnesium-Alloy Hydrides Reviewed

    Directory of Open Access Journals (Sweden)

    Thirugnasambandam G. Manivasagam

    2012-10-01

    Full Text Available As potential hydrogen storage media, magnesium based hydrides have been systematically studied in order to improve reversibility, storage capacity, kinetics and thermodynamics. The present article deals with the electrochemical and optical properties of Mg alloy hydrides. Electrochemical hydrogenation, compared to conventional gas phase hydrogen loading, provides precise control with only moderate reaction conditions. Interestingly, the alloy composition determines the crystallographic nature of the metal-hydride: a structural change is induced from rutile to fluorite at 80 at.% of Mg in Mg-TM alloy, with ensuing improved hydrogen mobility and storage capacity. So far, 6 wt.% (equivalent to 1600 mAh/g of reversibly stored hydrogen in MgyTM(1-yHx (TM: Sc, Ti has been reported. Thin film forms of these metal-hydrides reveal interesting electrochromic properties as a function of hydrogen content. Optical switching occurs during (dehydrogenation between the reflective metal and the transparent metal hydride states. The chronological sequence of the optical improvements in optically active metal hydrides starts with the rare earth systems (YHx, followed by Mg rare earth alloy hydrides (MgyGd(1-yHx and concludes with Mg transition metal hydrides (MgyTM(1-yHx. In-situ optical characterization of gradient thin films during (dehydrogenation, denoted as hydrogenography, enables the monitoring of alloy composition gradients simultaneously.

  6. High energy density battery based on complex hydrides

    Science.gov (United States)

    Zidan, Ragaiy

    2016-04-26

    A battery and process of operating a battery system is provided using high hydrogen capacity complex hydrides in an organic non-aqueous solvent that allows the transport of hydride ions such as AlH.sub.4.sup.- and metal ions during respective discharging and charging steps.

  7. High energy density battery based on complex hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Zidan, Ragaiy

    2016-04-26

    A battery and process of operating a battery system is provided using high hydrogen capacity complex hydrides in an organic non-aqueous solvent that allows the transport of hydride ions such as AlH.sub.4.sup.- and metal ions during respective discharging and charging steps.

  8. Synthesis, characterization and properties of some organozinc hydride complexes

    NARCIS (Netherlands)

    Koning, A.J. de; Boersma, J.; Kerk, G.J.M. van der

    1980-01-01

    The synthesis and characterization of the monopyridine complexes of ethylzinc hydride and phenylzinc hydride are described. On treatment with TMED these complexes are converted into R2Zn3H4. TMED species through a combination of ligand-exchange and disproportionation. The formation of organozinc hyd

  9. Hydride morphology and striation formation during delayed hydride cracking in Zr-2.5% Nb

    Energy Technology Data Exchange (ETDEWEB)

    Shek, G.K. [Ontario Hydro Technol., Ont. (Canada). Mater. Technol. Unit; Jovanovic, M.T. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mining, Metallurgical and Petroleum Engineering; Seahra, H. [Ontario Hydro Technol., Ont. (Canada). Mater. Technol. Unit; Ma, Y. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mining, Metallurgical and Petroleum Engineering; Li, D. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mining, Metallurgical and Petroleum Engineering; Eadie, R.L. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mining, Metallurgical and Petroleum Engineering

    1996-08-01

    These experiments were designed to study hydride formation at the crack tip, acoustic emission (AE), potential drop (PD) and striation formation during DHC (delayed hydride cracking) in Zr-2.5% Nb. The test material was taken from an especially extruded pressure tube, which showed similar strength properties to normal pressure tube material but somewhat coarser microstructure. In testing at K{sub I} below 12 MPa {radical}m at both 200 and 250 C very large striations (>40 {mu}m at 200 and >50 {mu}m at 250 C) were produced. In simultaneous monitoring with acoustic emission and potential drop, both AE and PD jumps were shown to be monolithic. The number of striations on the fracture surface corresponded to the number of monolithic AE/PD jumps. Tapered shaped hydrides with the thick end adjacent to the crack tip were observed. These hydrides grew in size during the incubation period until they reached the striation length and then fractured monolithically. However, when K{sub I} was increased beyond about 12 MPa {radical}m for these same specimens, the striation spacing decreased below 30 {mu}m, the monolithic jumping dissolved into more continuous changes in signals, although the smaller striations were still visible on the fracture surface. (orig.).

  10. Hydride morphology and striation formation during delayed hydride cracking in Zr-2.5% Nb

    Science.gov (United States)

    Shek, G. K.; Jovanoviċ, M. T.; Seahra, H.; Ma, Y.; Li, D.; Eadie, R. L.

    1996-08-01

    These experiments were designed to study hydride formation at the crack tip, acoustic emission (AE), potential drop (PD) and striation formation during DHC (delayed hydride cracking) in Zr-2.5% Nb. The test material was taken from an especially extrude pressure tube, which showed similar strength properties to normal pressure tube material but somewhat coarser microstructure. In testing at KI below 12 MPa √m at both 200 and 250°C very large striations (> 40 μ at 200 and >50 μm at 250°C) were produced. In simultaneous monitoring with acoustic emission and potential drop, both AE and PD jumps were shown to be monolithic. The number of striations on the fracture surface corresponded to the number of monolithic AE/PD jumps. Tapered shaped hydrides with the thick end adjacent to the crack tip were observed. These hydrides grew in size during the incubation period until they reached the striation length and then fractured monolithically. However, when KI was increased beyond about 12 MPa √m for these same specimens, the striation spacing decreased below 30 μ, the monolithic jumping dissolved into more continuous changes in signals, although the smaller striations were still visible on the fracture surface.

  11. ORNL Interim Progress Report on Hydride Reorientation CIRFT Tests

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yan, Yong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wang, Hong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-28

    A systematic study of H. B. Robinson (HBR) high burnup spent nuclear fuel (SNF) vibration integrity was performed in Phase I project under simulated transportation environments, using the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) hot cell testing technology developed at Oak Ridge National Laboratory in 2013–14. The data analysis on the as-irradiated HBR SNF rods demonstrated that the load amplitude is the dominant factor that controls the fatigue life of bending rods. However, previous studies have shown that the hydrogen content and hydride morphology has an important effect on zirconium alloy mechanical properties. To address the effect of radial hydrides in SNF rods, in Phase II a test procedure was developed to simulate the effects of elevated temperatures, pressures, and stresses during transfer-drying operations. Pressurized and sealed fuel segments were heated to the target temperature for a preset hold time and slow-cooled at a controlled rate. The procedure was applied to both non-irradiated/prehydrided and high-burnup Zircaloy-4 fueled cladding segments using the Nuclear Regulatory Commission-recommended 400°C maximum temperature limit at various cooling rates. Before testing high-burnup cladding, four out-of-cell tests were conducted to optimize the hydride reorientation (R) test condition with pre-hydride Zircaloy-4 cladding, which has the same geometry as the high burnup fuel samples. Test HR-HBR#1 was conducted at the maximum hoop stress of 145 MPa, at a 400°C maximum temperature and a 5°C/h cooling rate. On the other hand, thermal cycling was performed for tests HR-HBR#2, HR-HBR#3, and HR-HBR#4 to generate more radial hydrides. It is clear that thermal cycling increases the ratio of the radial hydride to circumferential hydrides. The internal pressure also has a significant effect on the radial hydride morphology. This report describes a procedure and experimental results of the four out-of-cell hydride reorientation tests of

  12. Growth and decomposition of Lithium and Lithium hydride on Nickel

    DEFF Research Database (Denmark)

    Engbæk, Jakob; Nielsen, Gunver; Nielsen, Jane Hvolbæk

    2006-01-01

    In this paper we have investigated the deposition, structure and decomposition of lithium and lithium-hydride films on a nickel substrate. Using surface sensitive techniques it was possible to quantify the deposited Li amount, and to optimize the deposition procedure for synthesizing lithium......-hydride films. By only making thin films of LiH it is possible to study the stability of these hydride layers and compare it directly with the stability of pure Li without having any transport phenomena or adsorbed oxygen to obscure the results. The desorption of metallic lithium takes place at a lower...... temperature than the decomposition of the lithium-hydride, confirming the high stability and sintering problems of lithium-hydride making the storage potential a challenge. (c) 2006 Elsevier B.V. All rights reserved....

  13. Photochromism of rare-earth metal-oxy-hydrides

    Science.gov (United States)

    Nafezarefi, F.; Schreuders, H.; Dam, B.; Cornelius, S.

    2017-09-01

    Recently, thin films of yttrium oxy-hydride (YOxHy) were reported to show an unusual color-neutral photochromic effect promising for application in smart windows. Our present work demonstrates that also oxy-hydrides based on Gd, Dy, and Er have photochromic properties and crystal structures similar to YOxHy. Compared to YOxHy, the optical bandgaps of the lanthanide based oxy-hydrides are smaller while photochromic contrast and kinetics show large variation among different cations. Based on these findings, we propose that cation alloying is a viable pathway to tailor the photochromic properties of oxy-hydride materials. Furthermore, we predict that the oxy-hydrides of the other lanthanides are also potentially photochromic.

  14. Metal hydrides for concentrating solar thermal power energy storage

    Science.gov (United States)

    Sheppard, D. A.; Paskevicius, M.; Humphries, T. D.; Felderhoff, M.; Capurso, G.; Bellosta von Colbe, J.; Dornheim, M.; Klassen, T.; Ward, P. A.; Teprovich, J. A.; Corgnale, C.; Zidan, R.; Grant, D. M.; Buckley, C. E.

    2016-04-01

    The development of alternative methods for thermal energy storage is important for improving the efficiency and decreasing the cost of concentrating solar thermal power. We focus on the underlying technology that allows metal hydrides to function as thermal energy storage (TES) systems and highlight the current state-of-the-art materials that can operate at temperatures as low as room temperature and as high as 1100 °C. The potential of metal hydrides for thermal storage is explored, while current knowledge gaps about hydride properties, such as hydride thermodynamics, intrinsic kinetics and cyclic stability, are identified. The engineering challenges associated with utilising metal hydrides for high-temperature TES are also addressed.

  15. Nanoindentation measurements of the mechanical properties of zirconium matrix and hydrides in unirradiated pre-hydrided nuclear fuel cladding

    Science.gov (United States)

    Rico, A.; Martin-Rengel, M. A.; Ruiz-Hervias, J.; Rodriguez, J.; Gomez-Sanchez, F. J.

    2014-09-01

    It is well known that the mechanical properties of the nuclear fuel cladding may be affected by the presence of hydrides. The average mechanical properties of hydrided cladding have been extensively investigated from a macroscopic point of view. In addition, the mechanical and fracture properties of bulk hydride samples fabricated from zirconium plates have also been reported. In this paper, Young's modulus, hardness and yield stress are measured for each phase, namely zirconium hydrides and matrix, of pre-hydrided nuclear fuel cladding. To this end, nanoindentation tests were performed on ZIRLO samples in as-received state, on a hydride blister and in samples with 150 and 1200 ppm of hydrogen homogeneously distributed along the hoop direction of the cladding. The results show that the measured mechanical properties of the zirconium hydrides and ZIRLO matrix (Young's modulus, hardness and yield stress) are rather similar. From the experimental data, the hydride volume fraction in the cladding samples with 150 and 1200 ppm was estimated and the average mechanical properties were calculated by means of the rule of mixtures. These values were compared with those obtained from ring compression tests. Good agreement between the results obtained by both methods was found.

  16. Nanoindentation measurements of the mechanical properties of zirconium matrix and hydrides in unirradiated pre-hydrided nuclear fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Rico, A., E-mail: alvaro.rico@urjc.es [DIMME, Departamento de Tecnología Mecánica, Universidad Rey Juan Carlos, c/Tulipán s/n, E-28933 Móstoles, Madrid (Spain); Martin-Rengel, M.A., E-mail: mamartin@mater.upm.es [Departamento de Ciencia de los Materiales, UPM, E.T.S.I. Caminos, Canales y Puertos, Profesor Aranguren SN, E-28040 Madrid (Spain); Ruiz-Hervias, J., E-mail: jesus.ruiz@upm.es [Departamento de Ciencia de los Materiales, UPM, E.T.S.I. Caminos, Canales y Puertos, Profesor Aranguren SN, E-28040 Madrid (Spain); Rodriguez, J. [DIMME, Departamento de Tecnología Mecánica, Universidad Rey Juan Carlos, c/Tulipán s/n, E-28933 Móstoles, Madrid (Spain); Gomez-Sanchez, F.J., E-mail: javier.gomez@amsimulation.com [Advanced Material Simulation, S.L, Madrid (Spain)

    2014-09-15

    It is well known that the mechanical properties of the nuclear fuel cladding may be affected by the presence of hydrides. The average mechanical properties of hydrided cladding have been extensively investigated from a macroscopic point of view. In addition, the mechanical and fracture properties of bulk hydride samples fabricated from zirconium plates have also been reported. In this paper, Young’s modulus, hardness and yield stress are measured for each phase, namely zirconium hydrides and matrix, of pre-hydrided nuclear fuel cladding. To this end, nanoindentation tests were performed on ZIRLO samples in as-received state, on a hydride blister and in samples with 150 and 1200 ppm of hydrogen homogeneously distributed along the hoop direction of the cladding. The results show that the measured mechanical properties of the zirconium hydrides and ZIRLO matrix (Young’s modulus, hardness and yield stress) are rather similar. From the experimental data, the hydride volume fraction in the cladding samples with 150 and 1200 ppm was estimated and the average mechanical properties were calculated by means of the rule of mixtures. These values were compared with those obtained from ring compression tests. Good agreement between the results obtained by both methods was found.

  17. Abstracts of SIG Sessions.

    Science.gov (United States)

    Proceedings of the ASIS Annual Meeting, 1997

    1997-01-01

    Presents abstracts of SIG Sessions. Highlights include digital collections; information retrieval methods; public interest/fair use; classification and indexing; electronic publication; funding; globalization; information technology projects; interface design; networking in developing countries; metadata; multilingual databases; networked…

  18. Mathematical games, abstract games

    CERN Document Server

    Neto, Joao Pedro

    2013-01-01

    User-friendly, visually appealing collection offers both new and classic strategic board games. Includes abstract games for two and three players and mathematical games such as Nim and games on graphs.

  19. Abstract sectional category

    CERN Document Server

    Diaz, F; Garcia, P; Murillo, A; Remedios, J

    2011-01-01

    We study, in an abstract axiomatic setting, the notion of sectional category of a morphism. From this, we unify and generalize known results about this invariant in different settings as well as we deduce new applications.

  20. Lithium hydride - A space age shielding material

    Science.gov (United States)

    Welch, F. H.

    1974-01-01

    Men and materials performing in the environment of an operating nuclear reactor require shielding from the escaping neutron particles and gamma rays. For efficient shielding from gamma rays, dense, high atomic number elements such as iron, lead, or tungsten are required, whereas light, low atomic number elements such as hydrogen, lithium, or beryllium are required for efficient neutron shielding. The use of lithium hydride (LiH) as a highly efficient neutron-shielding material is considered. It contains, combined into a single, stable compound, two of the elements most effective in attenuating and absorbing neutrons.

  1. Highly Concentrated Palladium Hydrides/Deuterides; Theory

    Energy Technology Data Exchange (ETDEWEB)

    Papaconstantopoulos, Dimitrios

    2013-11-26

    Accomplishments are reported in these areas: tight-binding molecular dynamics study of palladium; First-principles calculations and tight-binding molecular dynamics simulations of the palladium-hydrogen system; tight-binding studies of bulk properties and hydrogen vacancies in KBH{sub 4}; tight-binding study of boron structures; development of angular dependent potentials for Pd-H; and density functional and tight-binding calculations for the light-hydrides NaAlH4 and NaBH4

  2. Development of nickel-metal hydride cell

    Science.gov (United States)

    Kuwajima, Saburo; Kamimori, Nolimits; Nakatani, Kensuke; Yano, Yoshiaki

    1993-01-01

    National Space Development Agency of Japan (NASDA) has conducted the research and development (R&D) of battery cells for space use. A new R&D program about a Nickel-Metal Hydride (Ni-MH) cell for space use from this year, based on good results in evaluations of commercial Ni-MH cells in Tsukuba Space Center (TKSC), was started. The results of those commercial Ni-MH cell's evaluations and recent status about the development of Ni-MH cells for space use are described.

  3. Abstracts of contributed papers

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This volume contains 571 abstracts of contributed papers to be presented during the Twelfth US National Congress of Applied Mechanics. Abstracts are arranged in the order in which they fall in the program -- the main sessions are listed chronologically in the Table of Contents. The Author Index is in alphabetical order and lists each paper number (matching the schedule in the Final Program) with its corresponding page number in the book.

  4. Improved hydrogen desorption from lithium hydrazide by alkali metal hydride

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Liang, E-mail: liangzeng@hiroshima-u.ac.jp [Institute for Advanced Materials Research, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima 739-8530 (Japan); Miyaoka, Hiroki [Institute for Sustainable Sciences and Development, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima 739-8530 (Japan); Ichikawa, Takayuki; Kojima, Yoshitsugu [Institute for Advanced Materials Research, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima 739-8530 (Japan)

    2013-12-15

    Highlights: •LiH can dramatically improve the hydrogen desorption properties of LiNHNH{sub 2}. •KH doping had positive effect in promoting the hydrogen desorption properties of LiNHNH{sub 2}–LiH mixture. •The reaction mechanism between LiNHNH{sub 2} and LiH was studied and discussed. -- Abstract: Lithium hydrazide (LiNHNH{sub 2}), which is a white solid with 8.0 mass% of theoretical hydrogen content, was synthesized from a reaction between anhydrous hydrazine and n-butyllithium in diethyl ether. The thermodynamic properties of this compound and its detailed decomposition pathways had been investigated in our previous work. However, a number of undesired gaseous products such as hydrazine (N{sub 2}H{sub 4}) and ammonia (NH{sub 3}) were generated during the thermal decomposition of LiNHNH{sub 2}. In this work, alkali metal hydride was used to suppress the impurities in the desorbed hydrogen and improved the hydrogen desorption properties. The reaction mechanism between LiNHNH{sub 2} and LiH was also studied and discussed in this paper.

  5. Atomistic simulation of hydrogen dynamics near dislocations in vanadium hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Hiroshi, E-mail: h.ogawa@aist.go.jp

    2015-10-05

    Highlights: • Hydrogen–dislocation interaction was simulated by molecular dynamics method. • Different distribution of H atoms were observed at edge and screw dislocation. • Planner distribution of hydrogen may be caused by partialized edge dislocation. • Hydrogen diffusivity was reduced in both edge and screw dislocation models. • Pipe diffusion was observed for edge dislocation but not for screw dislocation. - Abstract: Kinetics of interstitial hydrogen atoms near dislocation cores were analyzed by atomistic simulation. Classical molecular dynamics method was applied to model structures of edge and screw dislocations in α-phase vanadium hydride. Simulation showed that hydrogen atoms aggregate near dislocation cores. The spatial distribution of hydrogen has a planner shape at edge dislocation due to dislocation partialization, and a cylindrical shape at screw dislocation. Simulated self-diffusion coefficients of hydrogen atoms in dislocation models were a half- to one-order lower than that of dislocation-free model. Arrhenius plot of self-diffusivity showed slightly different activation energies for edge and screw dislocations. Directional dependency of hydrogen diffusion near dislocation showed high and low diffusivity along edge and screw dislocation lines, respectively, hence so called ‘pipe diffusion’ possibly occur at edge dislocation but does not at screw dislocation.

  6. Hydride precipitation, fracture and plasticity mechanisms in pure zirconium and Zircaloy-4 at temperatures typical for the postulated loss-of-coolant accident

    Energy Technology Data Exchange (ETDEWEB)

    Pshenichnikov, Anton, E-mail: anton.pshenichnikov@kit.edu; Stuckert, Juri; Walter, Mario

    2016-05-15

    Highlights: • All δ-hydrides in Zr and Zircaloy-4 have basal or pyramidal types of habit planes. • Seven orientation relationships for δ-hydrides in Zr matrix were detected. • Decohesion fracture mechanism of hydrogenated Zr was investigated by fractography. - Abstract: The results of investigations of samples of zirconium and its alloy Zircaloy-4, hydrogenated at temperatures 900–1200 K (typical temperatures for loss-of-coolant accidents) are presented. The analyses, based on a range of complementary techniques (X-ray diffraction, scanning electron microscopy, electron backscatter diffraction) reveals the direct interrelation of internal structure transformation and hydride distribution with the degradation of mechanical properties. Formation of small-scale zirconium hydrides and their bulk distribution in zirconium and Zircaloy-4 were investigated. Fractographical analysis was performed on the ruptured samples tested in a tensile machine at room temperature. The already-known hydrogen embrittlement mechanisms based on hydride formation and hydrogen-enhanced decohesion and the applicability of them in the case of zirconium and its alloys is discussed.

  7. NATO Advanced Study Institute on Metal Hydrides

    CERN Document Server

    1981-01-01

    In the last five years, the study of metal hydrides has ex­ panded enormously due to the potential technological importance of this class of materials in hydrogen based energy conversion schemes. The scope of this activity has been worldwide among the industrially advanced nations. There has been a consensus among researchers in both fundamental and applied areas that a more basic understanding of the properties of metal/hydrogen syster;,s is required in order to provide a rational basis for the selection of materials for specific applications. The current worldwide need for and interest in research in metal hydrides indicated the timeliness of an Advanced Study Insti­ tute to provide an in-depth view of the field for those active in its various aspects. The inclusion of speakers from non-NATO coun­ tries provided the opportunity for cross-fertilization of ideas for future research. While the emphasis of the Institute was on basic properties, there was a conscious effort to stimulate interest in the applic...

  8. From permanent magnets to rechargeable hydride electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Willems, J.J.G.; Buschow, K.H.J.

    1987-02-15

    A brief historical survey is given of how the study of coercitivity mechanisms in SmCo/sub 5/ permanent-magnet materials eventually led to the discovery of the favourable hydrogen sorption properties of the compound LaNi/sub 5/. It is shown how continued research by many investigators dealing with a variety of different physical and chemical properties has resulted in an advanced understanding of some of the principles that govern hydrogen absorption and which are responsible for the changes in physical properties that accompany it. The problems associated with various applications of LaNi/sub 5/-based hydrogen-storage materials are also briefly discussed. A large part of this paper is devoted to the applicability of LaNi/sub 5/-type materials in batteries. Research in this area has resulted in the development of a new type of rechargeable battery: the nickel-hydride cell. This battery can be charged and discharged at high rates and is relatively insensitive to overcharging and overdischarging. Special attention is given to the nature of the electrode degradation process and the effect of composition variations in LaNi/sub 5/-related materials on the lifetime of the corresponding hydride electrodes when subjected to severe electrochemical charge-discharge cycles.

  9. Metal hydrides for lithium-ion batteries.

    Science.gov (United States)

    Oumellal, Y; Rougier, A; Nazri, G A; Tarascon, J-M; Aymard, L

    2008-11-01

    Classical electrodes for Li-ion technology operate via an insertion/de-insertion process. Recently, conversion electrodes have shown the capability of greater capacity, but have so far suffered from a marked hysteresis in voltage between charge and discharge, leading to poor energy efficiency and voltages. Here, we present the electrochemical reactivity of MgH(2) with Li that constitutes the first use of a metal-hydride electrode for Li-ion batteries. The MgH(2) electrode shows a large, reversible capacity of 1,480 mAh g(-1) at an average voltage of 0.5 V versus Li(+)/Li(o) which is suitable for the negative electrode. In addition, it shows the lowest polarization for conversion electrodes. The electrochemical reaction results in formation of a composite containing Mg embedded in a LiH matrix, which on charging converts back to MgH(2). Furthermore, the reaction is not specific to MgH(2), as other metal or intermetallic hydrides show similar reactivity towards Li. Equally promising, the reaction produces nanosized Mg and MgH(2), which show enhanced hydrogen sorption/desorption kinetics. We hope that such findings can pave the way for designing nanoscale active metal elements with applications in hydrogen storage and lithium-ion batteries.

  10. Metacognition and abstract reasoning.

    Science.gov (United States)

    Markovits, Henry; Thompson, Valerie A; Brisson, Janie

    2015-05-01

    The nature of people's meta-representations of deductive reasoning is critical to understanding how people control their own reasoning processes. We conducted two studies to examine whether people have a metacognitive representation of abstract validity and whether familiarity alone acts as a separate metacognitive cue. In Study 1, participants were asked to make a series of (1) abstract conditional inferences, (2) concrete conditional inferences with premises having many potential alternative antecedents and thus specifically conducive to the production of responses consistent with conditional logic, or (3) concrete problems with premises having relatively few potential alternative antecedents. Participants gave confidence ratings after each inference. Results show that confidence ratings were positively correlated with logical performance on abstract problems and concrete problems with many potential alternatives, but not with concrete problems with content less conducive to normative responses. Confidence ratings were higher with few alternatives than for abstract content. Study 2 used a generation of contrary-to-fact alternatives task to improve levels of abstract logical performance. The resulting increase in logical performance was mirrored by increases in mean confidence ratings. Results provide evidence for a metacognitive representation based on logical validity, and show that familiarity acts as a separate metacognitive cue.

  11. Dopant-vacancy binding effects in Li-doped magnesium hydride

    Science.gov (United States)

    Smith, Kyle C.; Fisher, Timothy S.; Waghmare, Umesh V.; Grau-Crespo, Ricardo

    2010-10-01

    We use a combination of ab initio calculations and statistical mechanics to investigate the substitution of Li+ for Mg2+ in magnesium hydride (MgH2) accompanied by the formation of hydrogen vacancies with positive charge (with respect to the original ion at the site). We show that the binding energy between dopants and vacancy defects leads to a significant fraction of trapped vacancies and therefore a dramatic reduction in the number of free vacancies available for diffusion. The concentration of free vacancies initially increases with dopant concentration but reaches a maximum at around 1mol% Li doping and slowly decreases with further doping. At the optimal level of doping, the corresponding concentration of free vacancies is much higher than the equilibrium concentrations of charged and neutral vacancies in pure MgH2 at typical hydrogen storage conditions. We also show that Li-doped MgH2 is thermodynamically metastable with respect to phase separation into pure magnesium and lithium hydrides at any significant Li concentration, even after considering the stabilization provided by dopant-vacancy interactions and configurational entropic effects. Our results suggest that lithium doping may enhance hydrogen diffusion hydride but only to a limited extent determined by an optimal dopant concentration and conditioned to the stability of the doped phase.

  12. Coenzyme binding and hydride transfer in Rhodobacter capsulatus ferredoxin/flavodoxin NADP(H) oxidoreductase.

    Science.gov (United States)

    Bortolotti, Ana; Pérez-Dorado, Inmaculada; Goñi, Guillermina; Medina, Milagros; Hermoso, Juan A; Carrillo, Néstor; Cortez, Néstor

    2009-02-01

    Ferredoxin-NADP(H) reductases catalyse the reversible hydride/electron exchange between NADP(H) and ferredoxin/flavodoxin, comprising a structurally defined family of flavoenzymes with two distinct subclasses. Those present in Gram-negative bacteria (FPRs) display turnover numbers of 1-5 s(-1) while the homologues of cyanobacteria and plants (FNRs) developed a 100-fold activity increase. We investigated nucleotide interactions and hydride transfer in Rhodobacter capsulatus FPR comparing them to those reported for FNRs. NADP(H) binding proceeds as in FNRs with stacking of the nicotinamide on the flavin, which resulted in formation of charge-transfer complexes prior to hydride exchange. The affinity of FPR for both NADP(H) and 2'-P-AMP was 100-fold lower than that of FNRs. The crystal structure of FPR in complex with 2'-P-AMP and NADP(+) allowed modelling of the adenosine ring system bound to the protein, whereas the nicotinamide portion was either not visible or protruding toward solvent in different obtained crystals. Stabilising contacts with the active site residues are different in the two reductase classes. We conclude that evolution to higher activities in FNRs was partially favoured by modification of NADP(H) binding in the initial complexes through changes in the active site residues involved in stabilisation of the adenosine portion of the nucleotide and in the mobile C-terminus of FPR.

  13. Mechanism of n-butane hydrogenolysis promoted by Ta-hydrides supported on silica

    KAUST Repository

    Pasha, Farhan Ahmad

    2014-06-06

    The mechanism of hydrogenolysis of alkanes, promoted by Ta-hydrides supported on silica via 2 ≡ Si-O- bonds, has been studied with a density functional theory (DFT) approach. Our study suggests that the initial monohydride (≡ Si-O-)2Ta(III)H is rapidly trapped by molecular hydrogen to form the more stable tris-hydride (≡ Si-O-) 2Ta(V)H3. Loading of n-butane to the Ta-center occurs through C-H activation concerted with elimination of molecular hydrogen (σ-bond metathesis). Once the Ta-alkyl species is formed, the C-C activation step corresponds to a β-alkyl transfer to the metal with elimination of an olefin. According to these calculations, an α-alkyl transfer to the metal to form a Ta-carbene species is of higher energy. The olefins formed during the C-C activation step can be rapidly hydrogenated by both mono- and tris-Ta-hydride species, making the overall process of alkane cracking thermodynamically favored. © 2014 American Chemical Society.

  14. Molecular rare-earth-metal hydrides in non-cyclopentadienyl environments.

    Science.gov (United States)

    Fegler, Waldemar; Venugopal, Ajay; Kramer, Mathias; Okuda, Jun

    2015-02-02

    Molecular hydrides of the rare-earth metals play an important role as homogeneous catalysts and as counterparts of solid-state interstitial hydrides. Structurally well-characterized non-metallocene-type hydride complexes allow the study of elementary reactions that occur at rare-earth-metal centers and of catalytic reactions involving bonds between rare-earth metals and hydrides. In addition to neutral hydrides, cationic derivatives have now become available.

  15. Monadic abstract interpreters

    DEFF Research Database (Denmark)

    Sergey, Ilya; Devriese, Dominique; Might, Matthew;

    2013-01-01

    -bounding to be independent of any particular semantics. Monads become the unifying agent between these concepts and between semantics. For instance, by plugging the same “context-insensitivity monad” into a monadicallyparameterized semantics for Java or for the lambda calculus, it yields the expected context......-insensitive analysis. To achieve this unification, we develop a systematic method for transforming a concrete semantics into a monadically-parameterized abstract machine. Changing the monad changes the behavior of the machine. By changing the monad, we recover a spectrum of machines—from the original concrete...... semantics to a monovariant, flow- and context-insensitive static analysis with a singly-threaded heap and weak updates. The monadic parameterization also suggests an abstraction over the ubiquitous monotone fixed-point computation found in static analysis. This abstraction makes it straightforward...

  16. Monadic abstract interpreters

    DEFF Research Database (Denmark)

    Sergey, Ilya; Devriese, Dominique; Might, Matthew

    2013-01-01

    -bounding to be independent of any particular semantics. Monads become the unifying agent between these concepts and between semantics. For instance, by plugging the same “context-insensitivity monad” into a monadicallyparameterized semantics for Java or for the lambda calculus, it yields the expected context...... semantics to a monovariant, flow- and context-insensitive static analysis with a singly-threaded heap and weak updates. The monadic parameterization also suggests an abstraction over the ubiquitous monotone fixed-point computation found in static analysis. This abstraction makes it straightforward...... to instrument an analysis with high-level strategies for improving precision and performance, such as abstract garbage collection and widening. While the paper itself runs the development for continuationpassing style, our generic implementation replays it for direct-style lambda-calculus and Featherweight Java...

  17. Ultratrace determination of tin by hydride generation in-atomizer trapping atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Průša, Libor [Institute of Analytical Chemistry of the ASCR, v. v. i., Veveří 97, 602 00 Brno (Czech Republic); Charles University in Prague, Faculty of Science, Department of Analytical Chemistry, Hlavova 8, Prague 2, CZ 128 43 Czech Republic (Czech Republic); Dědina, Jiří [Institute of Analytical Chemistry of the ASCR, v. v. i., Veveří 97, 602 00 Brno (Czech Republic); Kratzer, Jan, E-mail: jkratzer@biomed.cas.cz [Institute of Analytical Chemistry of the ASCR, v. v. i., Veveří 97, 602 00 Brno (Czech Republic)

    2013-12-04

    Graphical abstract: -- Highlights: •In-atomizer trapping HG-AAS was optimized for Sn. •A compact quartz trap-and-atomizer device was employed. •Generation, preconcentration and atomization steps were investigated in detail. •Hundred percent preconcentration efficiency for tin was reached. •Routine analytical method was developed for Sn determination (LOD of 0.03 ng mL{sup −1} Sn). -- Abstract: A quartz multiatomizer with its inlet arm modified to serve as a trap (trap-and-atomizer device) was employed to trap tin hydride and subsequently to volatilize collected analyte species with atomic absorption spectrometric detection. Generation, atomization and preconcentration conditions were optimized and analytical figures of merit of both on-line atomization as well as preconcentration modes were quantified. Preconcentration efficiency of 95 ± 5% was found. The detection limits reached were 0.029 and 0.14 ng mL{sup −1} Sn, respectively, for 120 s preconcentration period and on-line atomization mode without any preconcentration. The interference extent of other hydride forming elements (As, Se, Sb and Bi) on tin determination was found negligible in both modes of operation. The applicability of the developed preconcentration method was verified by Sn determination in a certified reference material as well as by analysis of real samples.

  18. Technical and economic aspects of hydrogen storage in metal hydrides

    Science.gov (United States)

    Schmitt, R.

    1981-01-01

    The recovery of hydrogen from such metal hydrides as LiH, MgH2, TiH2, CaH2 and FeTiH compounds is studied, with the aim of evaluating the viability of the technique for the storage of hydrogen fuel. The pressure-temperature dependence of the reactions, enthalpies of formation, the kinetics of the hydrogen absorption and desorption, and the mechanical and chemical stability of the metal hydrides are taken into account in the evaluation. Economic aspects are considered. Development of portable metal hydride hydrogen storage reservoirs is also mentioned.

  19. PIE techniques for hydride reorientation test at NDC

    Energy Technology Data Exchange (ETDEWEB)

    Tsuda, Tomohiro; Shinohara, Yasunari; Yamaguchi, Yoichiro [Nuclear Development Corporation, Ibaraki (Japan)

    2008-11-15

    Dry storage of spent fuels in the interim storage facility is being planned in Japan. However, the gradual deterioration of the mechanical property of fuel cladding due to internal pressure and temperature during the storage term is known. Therefore, the integrity of stored fuel rods should be confirmed before the start of dry storage. For the last several years, NDC had a lot of experiences on the hydride reorientation test. The specimen preparation techniques on the hydride reorientation test and the mechanical testing techniques after the hydride reorientation are shown in this paper.

  20. Hydrogen storage in metal hydrides and complex hydrides; Wasserstoffspeicherung in Metall- und komplexen Hydriden - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bielmann, M.; Zuettel, A.

    2007-07-01

    This final report for the Swiss Federal Office of Energy (SFOE), reports on work done in 2007 at the Swiss Federal Laboratories for Materials Science and Technology EMPA on the storage of hydrogen in metal hydrides and complex hydrides. In particular, the use of tetrahydroborates is noted. The potential of this class of materials is stressed. The structures at room-temperature were examined using neutron and X-ray diffraction methods. Thermodynamic methods helped determine the thermodynamic stability of the materials. Also, a complete energy diagram for the materials was developed. The use of silicon oxide to reduce activation energy and its catalytic effects are discussed. The challenges placed by desorption mechanisms are noted. The authors note that reversibility is basically proven.

  1. The deleuzian abstract machines

    DEFF Research Database (Denmark)

    Werner Petersen, Erik

    2005-01-01

    production. In Kafka: Toward a Minor Literature, Deleuze and Guatari gave the most comprehensive explanation to the abstract machine in the work of art. Like the war-machines of Virilio, the Kafka-machine operates in three gears or speeds. Furthermore, the machine is connected to spatial diagrams...

  2. ARM : abstract rewriting machine

    NARCIS (Netherlands)

    J.F.T. Kamperman; H.R. Walters (Pum)

    1993-01-01

    textabstractTerm rewriting is frequently used as implementation technique for algebraic specifications. In this paper we present the abstract term rewriting machine (ARM), which has an extremely compact instruction set and imposes no restrictions on the implemented TRSs. Apart from standard

  3. Abstraction and art.

    Science.gov (United States)

    Gortais, Bernard

    2003-01-01

    In a given social context, artistic creation comprises a set of processes, which relate to the activity of the artist and the activity of the spectator. Through these processes we see and understand that the world is vaster than it is said to be. Artistic processes are mediated experiences that open up the world. A successful work of art expresses a reality beyond actual reality: it suggests an unknown world using the means and the signs of the known world. Artistic practices incorporate the means of creation developed by science and technology and change forms as they change. Artists and the public follow different processes of abstraction at different levels, in the definition of the means of creation, of representation and of perception of a work of art. This paper examines how the processes of abstraction are used within the framework of the visual arts and abstract painting, which appeared during a period of growing importance for the processes of abstraction in science and technology, at the beginning of the twentieth century. The development of digital platforms and new man-machine interfaces allow multimedia creations. This is performed under the constraint of phases of multidisciplinary conceptualization using generic representation languages, which tend to abolish traditional frontiers between the arts: visual arts, drama, dance and music. PMID:12903659

  4. SPR 2015. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-04-01

    The volume contains the abstracts of the SPR (society for pediatric radiology) 2015 meeting covering the following issues: fetal imaging, muscoskeletal imaging, cardiac imaging, chest imaging, oncologic imaging, tools for process improvement, child abuse, contrast enhanced ultrasound, image gently - update of radiation dose recording/reporting/monitoring - meaningful or useless meaning?, pediatric thoracic imaging, ALARA.

  5. The Abstraction Engine

    DEFF Research Database (Denmark)

    Fortescue, Michael David

    The main thesis of this book is that abstraction, far from being confined to higher forms of cognition, language and logical reasoning, has actually been a major driving force throughout the evolution of creatures with brains. It is manifest in emotive as well as rational thought. Wending its way...

  6. ABSTRACTS AND KEY WORDS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Study on Optimization of Enzymic Preparation of Collagen Polypeptide from Skin of Gadous macrocephaius Liu Chun-e et al. (1) Abstract Enzymolysis was used to prepare collagen peptide. The optimum condition was determined based on one way ANOVA and orthogonal experimental design. The result indicated that use alkaline protease on the concentration of 4.5%,

  7. Parent Education: Abstract Bibliography.

    Science.gov (United States)

    Kremer, Barbara, Comp.

    This bibliography has been compiled to alert educators to parent education documents found in the ERIC microfiche collection and in journal literature. Abstracts of selected documents have been taken from "Research in Education (RIE)", and journal article citations from the "Current Index to Journals in Education (CIJE)". Included are published…

  8. ABSTRACTS AND KEY WORDS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Study on the Long-distance Transportation of Argopecten irridians concentricus ShenQin-long(1) Abstract The experiment was carried out in order to improve the survival rate of the scallop. The result indicated that keeping the water temperature at 4℃ was reasonable for the long-distance transportation of the scallop with oxygenated bags.

  9. Full Abstraction for HOPLA

    DEFF Research Database (Denmark)

    Nygaard, Mikkel; Winskel, Glynn

    2003-01-01

    A fully abstract denotational semantics for the higher-order process language HOPLA is presented. It characterises contextual and logical equivalence, the latter linking up with simulation. The semantics is a clean, domain-theoretic description of processes as downwards-closed sets of computation...

  10. Abstracts of SIG Sessions.

    Science.gov (United States)

    Proceedings of the ASIS Annual Meeting, 1995

    1995-01-01

    Presents abstracts of 15 special interest group (SIG) sessions. Topics include navigation and information utilization in the Internet, natural language processing, automatic indexing, image indexing, classification, users' models of database searching, online public access catalogs, education for information professions, information services,…

  11. Abstraction through Game Play

    Science.gov (United States)

    Avraamidou, Antri; Monaghan, John; Walker, Aisha

    2012-01-01

    This paper examines the computer game play of an 11-year-old boy. In the course of building a virtual house he developed and used, without assistance, an artefact and an accompanying strategy to ensure that his house was symmetric. We argue that the creation and use of this artefact-strategy is a mathematical abstraction. The discussion…

  12. Beyond the abstractions?

    DEFF Research Database (Denmark)

    Olesen, Henning Salling

    2006-01-01

      The anniversary of the International Journal of Lifelong Education takes place in the middle of a conceptual landslide from lifelong education to lifelong learning. Contemporary discourses of lifelong learning etc are however abstractions behind which new functions and agendas for adult education...

  13. Reasoning abstractly about resources

    Science.gov (United States)

    Clement, B.; Barrett, A.

    2001-01-01

    r describes a way to schedule high level activities before distributing them across multiple rovers in order to coordinate the resultant use of shared resources regardless of how each rover decides how to perform its activities. We present an algorithm for summarizing the metric resource requirements of an abstract activity based n the resource usages of its potential refinements.

  14. Incremental Bisimulation Abstraction Refinement

    DEFF Research Database (Denmark)

    Godskesen, Jens Christian; Song, Lei; Zhang, Lijun

    2013-01-01

    an abstraction refinement approach for the probabilistic computation tree logic (PCTL), which is based on incrementally computing a sequence of may- and must-quotient automata. These are induced by depth-bounded bisimulation equivalences of increasing depth. The approach is both sound and complete, since...

  15. Seismic Consequence Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    M. Gross

    2004-10-25

    The primary purpose of this model report is to develop abstractions for the response of engineered barrier system (EBS) components to seismic hazards at a geologic repository at Yucca Mountain, Nevada, and to define the methodology for using these abstractions in a seismic scenario class for the Total System Performance Assessment - License Application (TSPA-LA). A secondary purpose of this model report is to provide information for criticality studies related to seismic hazards. The seismic hazards addressed herein are vibratory ground motion, fault displacement, and rockfall due to ground motion. The EBS components are the drip shield, the waste package, and the fuel cladding. The requirements for development of the abstractions and the associated algorithms for the seismic scenario class are defined in ''Technical Work Plan For: Regulatory Integration Modeling of Drift Degradation, Waste Package and Drip Shield Vibratory Motion and Seismic Consequences'' (BSC 2004 [DIRS 171520]). The development of these abstractions will provide a more complete representation of flow into and transport from the EBS under disruptive events. The results from this development will also address portions of integrated subissue ENG2, Mechanical Disruption of Engineered Barriers, including the acceptance criteria for this subissue defined in Section 2.2.1.3.2.3 of the ''Yucca Mountain Review Plan, Final Report'' (NRC 2003 [DIRS 163274]).

  16. ABSTRACTS AND KEY WORDS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Study on the Enrichment Regularity of Semicarbazide in Algae Tian Xiu-hui eta1. (1) Abstract Semicarbazide (SEM) in three kinds of representative algae (Nitzschia closterium, Tetraselmis chui and Dicrateria sp) and seawater was determined using ultra performance liquid chromatogram tandem mass spectrometry in this work. Accumulation of semicarbazide (SEM) in algae under laboratory conditions was studied.

  17. Metaphors in Abstract Thought

    NARCIS (Netherlands)

    I. Boot (Inge)

    2010-01-01

    textabstractThe aim of the dissertation was to investigate the Conceptual Metaphor Theory (CMT, Lakoff & Johnson, 1980, 1999).The CMT proposes that abstract concepts are partly structured by concrete concepts through the mechanism of metaphorical mapping. In Chapter 2 we wanted to investigate the

  18. 2002 NASPSA Conference Abstracts.

    Science.gov (United States)

    Journal of Sport & Exercise Psychology, 2002

    2002-01-01

    Contains abstracts from the 2002 conference of the North American Society for the Psychology of Sport and Physical Activity. The publication is divided into three sections: the preconference workshop, "Effective Teaching Methods in the Classroom;" symposia (motor development, motor learning and control, and sport psychology); and free…

  19. ESPR 2014. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-06-15

    The Proceedings on ESPR 2014 include abstracts concerning the following topics: pediatric imaging: thorax, cardiovascular system, CT-technique, head and neck, perinatal imaging, molecular imaging; interventional imaging; specific focus: muscoskeletal imaging in juvenile idiopathic arthritis; radiation protection; oncology; molecular imaging - nuclear medicine; uroradiology and abdominal imaging.

  20. Cambridge Scientific Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    正Meteorological and Environmental Research has been included by Cambridge Scientific Abstracts (CSA) since 2011. CSA is a retrieval system published by Cambridge Information Group. CSA was founded in the late 1950's,and became part of the CIG family in 1971. CSA's original mission was publishing secondary source materials relating to the physical sciences. Completely

  1. Cambridge Scientific Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Meteorological and Environmental Research has been included by Cambridge Scientific Abstracts (CSA) since 2011. CSA is a retrieval system published by Cambridge Information Group. CSA was founded in the late 1950’s,and became part of the CIG family in 1971. CSA’s original mission was publishing secondary source materials relating to the physical sciences. Completely

  2. Impredicative concurrent abstract predicates

    DEFF Research Database (Denmark)

    Svendsen, Kasper; Birkedal, Lars

    2014-01-01

    We present impredicative concurrent abstract predicates { iCAP { a program logic for modular reasoning about concurrent, higher- order, reentrant, imperative code. Building on earlier work, iCAP uses protocols to reason about shared mutable state. A key novel feature of iCAP is the ability to dene...

  3. EBS Radionuclide Transport Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    R. Schreiner

    2001-06-27

    The purpose of this work is to develop the Engineered Barrier System (EBS) radionuclide transport abstraction model, as directed by a written development plan (CRWMS M&O 1999a). This abstraction is the conceptual model that will be used to determine the rate of release of radionuclides from the EBS to the unsaturated zone (UZ) in the total system performance assessment-license application (TSPA-LA). In particular, this model will be used to quantify the time-dependent radionuclide releases from a failed waste package (WP) and their subsequent transport through the EBS to the emplacement drift wall/UZ interface. The development of this conceptual model will allow Performance Assessment Operations (PAO) and its Engineered Barrier Performance Department to provide a more detailed and complete EBS flow and transport abstraction. The results from this conceptual model will allow PA0 to address portions of the key technical issues (KTIs) presented in three NRC Issue Resolution Status Reports (IRSRs): (1) the Evolution of the Near-Field Environment (ENFE), Revision 2 (NRC 1999a), (2) the Container Life and Source Term (CLST), Revision 2 (NRC 1999b), and (3) the Thermal Effects on Flow (TEF), Revision 1 (NRC 1998). The conceptual model for flow and transport in the EBS will be referred to as the ''EBS RT Abstraction'' in this analysis/modeling report (AMR). The scope of this abstraction and report is limited to flow and transport processes. More specifically, this AMR does not discuss elements of the TSPA-SR and TSPA-LA that relate to the EBS but are discussed in other AMRs. These elements include corrosion processes, radionuclide solubility limits, waste form dissolution rates and concentrations of colloidal particles that are generally represented as boundary conditions or input parameters for the EBS RT Abstraction. In effect, this AMR provides the algorithms for transporting radionuclides using the flow geometry and radionuclide concentrations

  4. Mechanism of H2 Production by Models for the [NiFe]-Hydrogenases: Role of Reduced Hydrides.

    Science.gov (United States)

    Ulloa, Olbelina A; Huynh, Mioy T; Richers, Casseday P; Bertke, Jeffery A; Nilges, Mark J; Hammes-Schiffer, Sharon; Rauchfuss, Thomas B

    2016-07-27

    The intermediacy of a reduced nickel-iron hydride in hydrogen evolution catalyzed by Ni-Fe complexes was verified experimentally and computationally. In addition to catalyzing hydrogen evolution, the highly basic and bulky (dppv)Ni(μ-pdt)Fe(CO)(dppv) ([1](0); dppv = cis-C2H2(PPh2)2) and its hydride derivatives have yielded to detailed characterization in terms of spectroscopy, bonding, and reactivity. The protonation of [1](0) initially produces unsym-[H1](+), which converts by a first-order pathway to sym-[H1](+). These species have C1 (unsym) and Cs (sym) symmetries, respectively, depending on the stereochemistry of the octahedral Fe site. Both experimental and computational studies show that [H1](+) protonates at sulfur. The S = 1/2 hydride [H1](0) was generated by reduction of [H1](+) with Cp*2Co. Density functional theory (DFT) calculations indicate that [H1](0) is best described as a Ni(I)-Fe(II) derivative with significant spin density on Ni and some delocalization on S and Fe. EPR spectroscopy reveals both kinetic and thermodynamic isomers of [H1](0). Whereas [H1](+) does not evolve H2 upon protonation, treatment of [H1](0) with acids gives H2. The redox state of the "remote" metal (Ni) modulates the hydridic character of the Fe(II)-H center. As supported by DFT calculations, H2 evolution proceeds either directly from [H1](0) and external acid or from protonation of the Fe-H bond in [H1](0) to give a labile dihydrogen complex. Stoichiometric tests indicate that protonation-induced hydrogen evolution from [H1](0) initially produces [1](+), which is reduced by [H1](0). Our results reconcile the required reductive activation of a metal hydride and the resistance of metal hydrides toward reduction. This dichotomy is resolved by reduction of the remote (non-hydride) metal of the bimetallic unit.

  5. Complex Hydride Compounds with Enhanced Hydrogen Storage Capacity

    Energy Technology Data Exchange (ETDEWEB)

    Mosher, Daniel A.; Opalka, Susanne M.; Tang, Xia; Laube, Bruce L.; Brown, Ronald J.; Vanderspurt, Thomas H.; Arsenault, Sarah; Wu, Robert; Strickler, Jamie; Anton, Donald L.; Zidan, Ragaiy; Berseth, Polly

    2008-02-18

    The United Technologies Research Center (UTRC), in collaboration with major partners Albemarle Corporation (Albemarle) and the Savannah River National Laboratory (SRNL), conducted research to discover new hydride materials for the storage of hydrogen having on-board reversibility and a target gravimetric capacity of ≥ 7.5 weight percent (wt %). When integrated into a system with a reasonable efficiency of 60% (mass of hydride / total mass), this target material would produce a system gravimetric capacity of ≥ 4.5 wt %, consistent with the DOE 2007 target. The approach established for the project combined first principles modeling (FPM - UTRC) with multiple synthesis methods: Solid State Processing (SSP - UTRC), Solution Based Processing (SBP - Albemarle) and Molten State Processing (MSP - SRNL). In the search for novel compounds, each of these methods has advantages and disadvantages; by combining them, the potential for success was increased. During the project, UTRC refined its FPM framework which includes ground state (0 Kelvin) structural determinations, elevated temperature thermodynamic predictions and thermodynamic / phase diagram calculations. This modeling was used both to precede synthesis in a virtual search for new compounds and after initial synthesis to examine reaction details and options for modifications including co-reactant additions. The SSP synthesis method involved high energy ball milling which was simple, efficient for small batches and has proven effective for other storage material compositions. The SBP method produced very homogeneous chemical reactions, some of which cannot be performed via solid state routes, and would be the preferred approach for large scale production. The MSP technique is similar to the SSP method, but involves higher temperature and hydrogen pressure conditions to achieve greater species mobility. During the initial phases of the project, the focus was on higher order alanate complexes in the phase space

  6. High level theoretical study of binding and of the potential energy surface in benzene-hydride system

    Energy Technology Data Exchange (ETDEWEB)

    Coletti, Cecilia, E-mail: ccoletti@unich.it [Dipartimento di Scienze del Farmaco, Universita ' G. d' Annunzio' Chieti-Pescara, Via dei Vestini 31, 66100 Chieti (Italy); Re, Nazzareno [Dipartimento di Scienze del Farmaco, Universita ' G. d' Annunzio' Chieti-Pescara, Via dei Vestini 31, 66100 Chieti (Italy)

    2012-04-04

    Graphical abstract: In-plane minimum geometries for benzene-H{sup -} non-covalent adducts: linear adduct (left) with the hydride ion hydrogen bonded to one aromatic hydrogen; bifurcated adduct (right), with the hydride ion hydrogen bonded to two adjacent aromatic hydrogens. Highlights: Black-Right-Pointing-Pointer Theoretical study on covalent and non-covalent binding in benzene-hydride. Black-Right-Pointing-Pointer Two non-covalent stable adducts were characterized in the in-plane geometry. Black-Right-Pointing-Pointer Significant sections of the potential energy surface were determined. Black-Right-Pointing-Pointer Formation of a very stable C{sub 6}H{sub 7}{sup -} anion upon covalent binding to carbon. - Abstract: High level ab initio calculations were performed on the interaction of the hydride anion with benzene, a system of potential interest for modelling the interactions occurring in hydrogen rich planetary atmospheres. We investigated both non-covalent and covalent binding, exploring the complete basis set limit using highly correlated MP2 and CCSD(T) levels of theory. Two non-covalent minima on the potential energy surface have been characterized, and found to correspond to moderately strong hydrogen bonding interactions. To gain further insight on the nature of binding, the total interaction energy was decomposed into its physically meaningful components and selected sections of the potential energy surface were calculated. Moreover, we found that H{sup -} can easily covalently bind to one of the carbon atoms of benzene to form a stable C{sub 6}H{sub 7}{sup -} anion, a global minimum on the potential energy surface, characterized by a puckered geometry, with a carbon atom bending out of the benzene plane. A slightly less stable planar C{sub 6}H{sub 7}{sup -} structure was also identified, corresponding to the transition state for the flipping motion of the puckered species.

  7. Acute arsenious hydride intoxication. Four cases

    Energy Technology Data Exchange (ETDEWEB)

    Gosselin, B.; Mathieu, D.; Desprez-Nolf, M.; Cosson, A.; Goudemand, J.; Haguenoer, J.M.; Wattel, F.

    1982-02-06

    While engaged in the repair of a zinc furnace, 4 workers were accidentally exposed to arsenious hydride (AsH3) fumes. Acute intravascular haemolysis developed within a few hours. On admission, the patients immediately underwent exsanguino-transfusion; 8.2 to 10.2 l of blood were exchanged through a continuous perfusion pump at the rate of 1 l/hour. Two patients resumed diuresis during transfusion, but the other two required repeated haemodialysis. Between the 10th and 30th days, while renal function was gradually returning to normal, mildly megaloblastic anaemia developed. This was followed during the 3rd month by clinical and electric signs of polyneuritis of the lower and upper limbs, which subsequently regressed. Regular measurements of arsenic levels in the blood and urine were performed between and during exsanguino-transfusion and haemodialysis.

  8. Hydrogen desorption from nanostructured magnesium hydride composites

    Directory of Open Access Journals (Sweden)

    Brdarić Tanja P.

    2007-01-01

    Full Text Available The influence of 3d transition metal addition (Fe, Co and Ni on the desorption properties of magnesium hydride were studied. The ball milling of MgH2-3d metal blends was performed under Ar. Microstructural and morphological characterization were performed by XRD and SEM analysis, while the hydrogen desorption properties were investigated by DSC. The results show a strong correlation between the morphology and thermal stability of the composites. The complex desorption behavior (the existence of more than one desorption peak was correlated with the dispersion of the metal additive particles that appear to play the main role in the desorption. The desorption temperature can be reduced by more than 100 degrees if Fe is added as additive. The activation energy for H2 desorption from the MgH2-Fe composite is 120 kJ/mol, implying that diffusion controls the dehydration process.

  9. Review of magnesium hydride-based materials: development and optimisation

    NARCIS (Netherlands)

    Crivello, J. -C.; Dam, B.; Denys, R. V.; Dornheim, M.; Grant, D. M.; Huot, J.; Jensen, T. R.; de Jongh, P.|info:eu-repo/dai/nl/186125372; Latroche, M.; Milanese, C.; Milcius, D.; Walker, G. S.; Webb, C. J.; Zlotea, C.; Yartys, V. A.

    Magnesium hydride has been studied extensively for applications as a hydrogen storage material owing to the favourable cost and high gravimetric and volumetric hydrogen densities. However, its high enthalpy of decomposition necessitates high working temperatures for hydrogen desorption while the

  10. Direct observation of hydrides formation in cavity-grade niobium

    Directory of Open Access Journals (Sweden)

    F. Barkov

    2012-12-01

    Full Text Available Niobium is an important technological superconductor used to make radio frequency cavities for particle accelerators. Using laser confocal microscopy we have directly investigated hydride precipitates formation in cavity-grade niobium at 77 and 140 K. We have found that large hydrides were usually formed after chemical or mechanical treatments, which are known to lead to a strong degradation of the quality factor known as Q disease. From our experiments we can conclude that hydrides causing Q disease are islands with a characteristic thickness of ≳100  nm and in-plane dimensions 1–10  μm. Our results show that mechanical polishing uploads a lot of hydrogen into bulk niobium while electropolishing leads to a mild contamination. Vacuum treatments at 600–800°C are demonstrated to preclude large hydride formation in line with the absence of Q disease in similarly treated cavities.

  11. Materials science of Mg-Ni-based new hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Orimo, S.; Fujii, H. [Hiroshima Univ. (Japan). Faculty of Integrated Arts and Sciences

    2001-02-01

    One of the advantageous functional properties of Mg alloys (or compounds) is to exhibit the reversible hydriding reaction. In this paper, we present our systematic studies regarding the relationship between nanometer- or atomistic-scale structures and the specific hydriding properties of the Mg-Ni binary system, such as(1) nanostructured (n)-Mg{sub 2}Ni, (2) a mixture of n-Mg{sub 2}Ni and amorphous (a)-MgNi,(3) pure a-MgNi, and(4) n-MgNi{sub 2}. Further studies on(5) an a-MgNi-based system for clarifying the effect of the short-range ordering on the structural and hydriding properties and(6) a MgNi{sub 2}-based system for synthesizing the new Laves phase structure are also presented. The materials science of Mg-Ni-based new hydrides will provide indispensable knowledge for practically developing the Mg alloys as hydrogen-storage materials. (orig.)

  12. Structure and bonding of second-row hydrides

    OpenAIRE

    Blinder, S. M.

    2014-01-01

    The atomic orbitals, hybridization and chemical bonding of the most common hydrides of boron, carbon, nitrogen and oxygen are described. This can be very instructive for beginning students in chemistry and chemical physics.

  13. Artificial exomuscle investigations for applications--metal hydride.

    Science.gov (United States)

    Crevier, Marie-Charlotte; Richard, Martin; Rittenhouse, D Matheson; Roy, Pierre-Olivier; Bédard, Stéphane

    2007-03-01

    In pursuing the development of bionic devices, Victhom identified a need for technologies that could replace current motorized systems and be better integrated into the human body motion. The actuators used to obtain large displacements are noisy, heavy, and do not adequately reproduce human muscle behavior. Subsequently, a project at Victhom was devoted to the development of active materials to obtain an artificial exomuscle actuator. An exhaustive literature review was done at Victhom to identify promising active materials for the development of artificial muscles. According to this review, metal hydrides were identified as a promising technology for artificial muscle development. Victhom's investigations focused on determining metal hydride actuator potential in the context of bionics technology. Based on metal hydride properties and artificial muscle requirements such as force, displacement and rise time, an exomuscle was built. In addition, a finite element model, including heat and mass transfer in the metal hydride, was developed and implemented in FEMLAB software.

  14. DETERMINATION OF METAL HYDRIDE SYSTEMS CHARACTERISTICS WHILE HEATING

    Directory of Open Access Journals (Sweden)

    Yu. Kluchka

    2012-01-01

    Full Text Available Experimental dependence of the pressure of hydrogen in the hydride cartridge when it is heated is obtained. Experimental data prove the theoretical values with an accuracy of ≈ 6%.

  15. Bipolar Nickel-Metal Hydride Battery Being Developed

    Science.gov (United States)

    Manzo, Michelle A.

    1998-01-01

    The NASA Lewis Research Center has contracted with Electro Energy, Inc., to develop a bipolar nickel-metal hydride battery design for energy storage on low-Earth-orbit satellites. The objective of the bipolar nickel-metal hydride battery development program is to approach advanced battery development from a systems level while incorporating technology advances from the lightweight nickel electrode field, hydride development, and design developments from nickel-hydrogen systems. This will result in a low-volume, simplified, less-expensive battery system that is ideal for small spacecraft applications. The goals of the program are to develop a 1-kilowatt, 28-volt (V), bipolar nickel-metal hydride battery with a specific energy of 100 watt-hours per kilogram (W-hr/kg), an energy density of 250 W-hr/liter and a 5-year life in low Earth orbit at 40-percent depth-of-discharge.

  16. High-pressure synthesis of noble metal hydrides.

    Science.gov (United States)

    Donnerer, Christian; Scheler, Thomas; Gregoryanz, Eugene

    2013-04-07

    The formation of hydride phases in the noble metals copper, silver, and gold was investigated by in situ x-ray diffraction at high hydrogen pressures. In the case of copper, a novel hexagonal hydride phase, Cu2H, was synthesised at pressures above 18.6 GPa. This compound exhibits an anti-CdI2-type structure, where hydrogen atoms occupy every second layer of octahedral interstitial sites. In contrast to chemically produced CuH, this phase does not show a change in compressibility compared to pure copper. Furthermore, repeated compression (after decomposition of Cu2H) led to the formation of cubic copper hydride at 12.5 GPa, a phenomenon attributed to an alteration of the microstructure during dehydrogenation. No hydrides of silver (up to 87 GPa) or gold (up to 113 GPa) were found at both room and high temperatures.

  17. Artificial exomuscle investigations for applications-metal hydride

    Energy Technology Data Exchange (ETDEWEB)

    Crevier, Marie-Charlotte; Richard, Martin; Rittenhouse, D Matheson; Roy, Pierre-Olivier; Bedard, Stephane [Victhom Human Bionics Inc., Saint-Augustin-de-Desmaures, QC (Canada)

    2007-03-01

    In pursuing the development of bionic devices, Victhom identified a need for technologies that could replace current motorized systems and be better integrated into the human body motion. The actuators used to obtain large displacements are noisy, heavy, and do not adequately reproduce human muscle behavior. Subsequently, a project at Victhom was devoted to the development of active materials to obtain an artificial exomuscle actuator. An exhaustive literature review was done at Victhom to identify promising active materials for the development of artificial muscles. According to this review, metal hydrides were identified as a promising technology for artificial muscle development. Victhom's investigations focused on determining metal hydride actuator potential in the context of bionics technology. Based on metal hydride properties and artificial muscle requirements such as force, displacement and rise time, an exomuscle was built. In addition, a finite element model, including heat and mass transfer in the metal hydride, was developed and implemented in FEMLAB software. (review article)

  18. Hydrogen storage in sodium aluminum hydride.

    Energy Technology Data Exchange (ETDEWEB)

    Ozolins, Vidvuds; Herberg, J.L. (Lawrence Livermore National Laboratories, Livermore, CA); McCarty, Kevin F.; Maxwell, Robert S. (Lawrence Livermore National Laboratories, Livermore, CA); Stumpf, Roland Rudolph; Majzoub, Eric H.

    2005-11-01

    Sodium aluminum hydride, NaAlH{sub 4}, has been studied for use as a hydrogen storage material. The effect of Ti, as a few mol. % dopant in the system to increase kinetics of hydrogen sorption, is studied with respect to changes in lattice structure of the crystal. No Ti substitution is found in the crystal lattice. Electronic structure calculations indicate that the NaAlH{sub 4} and Na{sub 3}AlH{sub 6} structures are complex-ionic hydrides with Na{sup +} cations and AlH{sub 4}{sup -} and AlH{sub 6}{sup 3-} anions, respectively. Compound formation studies indicate the primary Ti-compound formed when doping the material at 33 at. % is TiAl{sub 3} , and likely Ti-Al compounds at lower doping rates. A general study of sorption kinetics of NaAlH{sub 4}, when doped with a variety of Ti-halide compounds, indicates a uniform response with the kinetics similar for all dopants. NMR multiple quantum studies of solution-doped samples indicate solvent interaction with the doped alanate. Raman spectroscopy was used to study the lattice dynamics of NaAlH{sub 4}, and illustrated the molecular ionic nature of the lattice as a separation of vibrational modes between the AlH{sub 4}{sup -} anion-modes and lattice-modes. In-situ Raman measurements indicate a stable AlH{sub 4}{sup -} anion that is stable at the melting temperature of NaAlH{sub 4}, indicating that Ti-dopants must affect the Al-H bond strength.

  19. Building Safe Concurrency Abstractions

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    2014-01-01

    Concurrent object-oriented programming in Beta is based on semaphores and coroutines and the ability to define high-level concurrency abstractions like monitors, and rendezvous-based communication, and their associated schedulers. The coroutine mechanism of SIMULA has been generalized...... into the notions of concurrent and alternating objects. Alternating objects may be used to start a cooperative thread for each possible blocking communication and is thus an alternative to asynchronous messages and guarded commands. Beta like SIMULA, the first OO language, was designed as a language for modeling...... as well as programming, and we describe how this has had an impact on the design of the language. Although Beta supports the definition of high-level concurrency abstractions, the use of these rely on the discipline of the programmer as is the case for Java and other mainstream OO languages. We introduce...

  20. Abstracts of Main Essays

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Position of Capitalist Study in Marx's Social Formation Theory Yang Xue-gong Xi Da-min The orientation and achievements of Marx's study of Capitalism or bourgeois society is the foundation of his social formation theory. On the base of his scientific study of capitalism, Marx evolves his concept of eco- nomic social formation, the scientific methodology of researching other social formations or social forms, the clues of the development of social formations, the abstraction of the general laws as well as his reflection on this abstraction. A full evaluation and acknowledgement of the position of capitalist study in Marx's social formation theory is crucial for revising Marx's social formation theory in the new era and for solving some controversial issues in the research of social formation theory.

  1. An Abstract Data Interface

    Science.gov (United States)

    Allan, D. J.

    The Abstract Data Interface (ADI) is a system within which both abstract data models and their mappings on to file formats can be defined. The data model system is object-oriented and closely follows the Common Lisp Object System (CLOS) object model. Programming interfaces in both C and \\fortran are supplied, and are designed to be simple enough for use by users with limited software skills. The prototype system supports access to those FITS formats most commonly used in the X-ray community, as well as the Starlink NDF data format. New interfaces can be rapidly added to the system---these may communicate directly with the file system, other ADI objects or elsewhere (e.g., a network connection).

  2. Introduction to abstract analysis

    CERN Document Server

    Goldstein, Marvin E

    2015-01-01

    Developed from lectures delivered at NASA's Lewis Research Center, this concise text introduces scientists and engineers with backgrounds in applied mathematics to the concepts of abstract analysis. Rather than preparing readers for research in the field, this volume offers background necessary for reading the literature of pure mathematics. Starting with elementary set concepts, the treatment explores real numbers, vector and metric spaces, functions and relations, infinite collections of sets, and limits of sequences. Additional topics include continuity and function algebras, Cauchy complet

  3. DEGRO 2017. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-06-15

    The volume includes abstracts of the Annual DEGRO Meeting 2017 covering lectures and poster sessions with the following issues: lymphoma, biology, physics, radioimmunotherapy, sarcomas and rare tumors, prostate carcinoma, lung tumors, benign lesions and new media, mamma carcinoma, gastrointestinal tumors, quality of life, care science and quality assurance, high-technology methods and palliative situation, head-and-neck tumors, brain tumors, central nervous system metastases, guidelines, radiation sensitivity, radiotherapy, radioimmunotherapy.

  4. SPR 2014. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-05-15

    The proceedings of the SPR 2014 meeting include abstracts on the following topics: Body imaging techniques: practical advice for clinic work; thoracic imaging: focus on the lungs; gastrointestinal imaging: focus on the pancreas and bowel; genitourinary imaging: focus on gonadal radiology; muscoskeletal imaging; focus on oncology; child abuse and nor child abuse: focus on radiography; impact of NMR and CT imaging on management of CHD; education and communication: art and practice in pediatric radiology.

  5. Research Abstracts of 1982.

    Science.gov (United States)

    1982-12-01

    Activity in Hamsters (Abstract #667) 9. L. SIMONSON*, B. LAMBERTS, E. PEDERSON and D. REIHER’--*gEffect of Saliva and Sucrose on Adherence of S.. mutans to...presence of osteosclerosis and/or enlargement of periodontal ligament space; pain duration greater than one hour and spontaneous or severe pain; no...Unstimulated whole saliva was collected in chilled containers from 29 CF and 29 CA recruits, along with data on smoking habits. Flow rate, pH, OSCN

  6. Generalized Abstract Symbolic Summaries

    Science.gov (United States)

    Person, Suzette; Dwyer, Matthew B.

    2009-01-01

    Current techniques for validating and verifying program changes often consider the entire program, even for small changes, leading to enormous V&V costs over a program s lifetime. This is due, in large part, to the use of syntactic program techniques which are necessarily imprecise. Building on recent advances in symbolic execution of heap manipulating programs, in this paper, we develop techniques for performing abstract semantic differencing of program behaviors that offer the potential for improved precision.

  7. Towards Composable Concurrency Abstractions

    Directory of Open Access Journals (Sweden)

    Janwillem Swalens

    2014-06-01

    Full Text Available In the past decades, many different programming models for managing concurrency in applications have been proposed, such as the actor model, Communicating Sequential Processes, and Software Transactional Memory. The ubiquity of multi-core processors has made harnessing concurrency even more important. We observe that modern languages, such as Scala, Clojure, or F#, provide not one, but multiple concurrency models that help developers manage concurrency. Large end-user applications are rarely built using just a single concurrency model. Programmers need to manage a responsive UI, deal with file or network I/O, asynchronous workflows, and shared resources. Different concurrency models facilitate different requirements. This raises the issue of how these concurrency models interact, and whether they are composable. After all, combining different concurrency models may lead to subtle bugs or inconsistencies. In this paper, we perform an in-depth study of the concurrency abstractions provided by the Clojure language. We study all pairwise combinations of the abstractions, noting which ones compose without issues, and which do not. We make an attempt to abstract from the specifics of Clojure, identifying the general properties of concurrency models that facilitate or hinder composition.

  8. Electronic structure of ternary hydrides based on light elements

    Energy Technology Data Exchange (ETDEWEB)

    Orgaz, E. [Departamento de Fisica y Quimica Teorica, Facultad de Quimica, Universidad Nacional Autonoma de Mexico, CP 04510 Coyoacan, Mexico, D.F. (Mexico)]. E-mail: orgaz@eros.pquim.unam.mx; Membrillo, A. [Departamento de Fisica y Quimica Teorica, Facultad de Quimica, Universidad Nacional Autonoma de Mexico, CP 04510 Coyoacan, Mexico, D.F. (Mexico); Castaneda, R. [Departamento de Fisica y Quimica Teorica, Facultad de Quimica, Universidad Nacional Autonoma de Mexico, CP 04510 Coyoacan, Mexico, D.F. (Mexico); Aburto, A. [Departamento de Fisica, Facultad de Ciencias, Universidad Nacional Autonoma de Mexico, CP 04510 Coyoacan, Mexico, D.F. (Mexico)

    2005-12-08

    Ternary hydrides based on light elements are interesting owing to the high available energy density. In this work we focused into the electronic structure of a series of known systems having the general formula AMH{sub 4}(A=Li,Na,M=B,Al). We computed the energy bands and the total and partial density of states using the linear-augmented plane waves method. In this report, we discuss the chemical bonding in this series of complex hydrides.

  9. Ab-Initio Study of the Group 2 Hydride Anions

    Science.gov (United States)

    Harris, Joe P.; Wright, Timothy G.; Manship, Daniel R.

    2013-06-01

    The beryllium hydride (BeH)- dimer has recently been shown to be surprisingly strongly bound, with an electronic structure which is highly dependent on internuclear separation. At the equilibrium distance, the negative charge is to be found on the beryllium atom, despite the higher electronegativity of the hydrogen. The current study expands this investigation to the other Group 2 hydrides, and attempts to explain these effects. M. Verdicchio, G. L. Bendazzoli, S. Evangelisti, T. Leininger J. Phys. Chem. A, 117, 192, (2013)

  10. Method of selective reduction of polyhalosilanes with alkyltin hydrides

    Science.gov (United States)

    Sharp, Kenneth G.; D'Errico, John J.

    1989-01-01

    The invention relates to the selective and stepwise reduction of polyhalosilanes by reacting at room temperature or below with alkyltin hydrides without the use of free radical intermediates. Alkyltin hydrides selectively and stepwise reduce the Si--Br, Si--Cl, or Si--I bonds while leaving intact any Si--F bonds. When two or more different halogens are present on the polyhalosilane, the halogen with the highest atomic weight is preferentially reduced.

  11. Method of selective reduction of halodisilanes with alkyltin hydrides

    Science.gov (United States)

    D'Errico, John J.; Sharp, Kenneth G.

    1989-01-01

    The invention relates to the selective and sequential reduction of halodisilanes by reacting these compounds at room temperature or below with trialkyltin hydrides or dialkyltin dihydrides without the use of free radical intermediates. The alkyltin hydrides selectively and sequentially reduce the Si-Cl, Si-Br or Si-I bonds while leaving intact the Si-Si and Si-F bonds present.

  12. Electronic structure and optical properties of lightweight metal hydrides

    NARCIS (Netherlands)

    Setten, van M.J.; Popa, V.A.; Wijs, de G.A.; Brocks, G.

    2007-01-01

    We study the dielectric functions of the series of simple hydrides LiH, NaH, MgH2, and AlH3, and of the complex hydrides Li3AlH6, Na3AlH6, LiAlH4, NaAlH4, and Mg(AlH4)2, using first-principles density-functional theory and GW calculations. All compounds are large gap insulators with GW single-partic

  13. Hydrogen Storage Characteristics of Metal Hydro-Borate and Transition Element-Added Magnesium Hydride

    Energy Technology Data Exchange (ETDEWEB)

    Song, Myoung Youp; Kwak, Young Jun [Chonbuk National University, Jeonju (Korea, Republic of); Park, Hye Ryoung [Chonnam National University, Gwangju (Korea, Republic of)

    2016-07-15

    A metal hydro-borate Zn(BH{sub 4}){sub 2} was prepared by milling ZnCl{sub 2} and NaBH{sub 4} in a planetary ball mill in an Ar atmosphere. This sample contained NaCl. 95 wt% MgH{sub 2}-2.5 wt% Zn(BH{sub 4}){sub 2}-2.5 wt% Ni samples [named MgH{sub 2}-2.5Zn(BH{sub 4}){sub 2}-2.5Ni] were then prepared by milling in a planetary ball mill in a hydrogen atmosphere. The hydrogen absorption and release properties of the prepared samples were investigated. In particular, variations in the initial hydriding and dehydriding rates with temperature were examined. MgH{sub 2}-2.5Zn(BH{sub 4}){sub 2}-2.5Ni dehydrided at the fourth cycle contained Mg, MgO, and small amounts of β-MgH2 and Mg2Ni. The sample after hydriding-dehydriding cycling had a slightly smaller average particle size and a larger BET specific surface area than the sample after milling. Increasing the temperature from 573 K to 623 K led to a decrease in the initial hydriding rate. The initial dehydriding rate increased as the temperature increased from 573 K to 643 K. At 573 K under 12 bar H{sub 2}, the sample absorbed 3.85 wt% H for 2.5 min, 4.60 wt% H for 5 min, 4.64 wt% H for 10 min, and 4.80 wt% H for 60 min. The MgH{sub 2}-2.5Zn(BH{sub 4}){sub 2}-2.5Ni had an effective hydrogen storage capacity (the quantity of hydrogen absorbed for 60 min) of near 5 wt% (4.96 wt% at 593 K).

  14. EBS Radionuclide Transport Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    J. Prouty

    2006-07-14

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment (TSPA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport model considers advective transport and diffusive transport

  15. Development of nickel-metal hydride cell: An update

    Science.gov (United States)

    Kuwajima, S.; Kusawake, Hiroaki; Nakatani, Kensuke; Yano, Y.

    1994-01-01

    This paper presents in viewgraph format an overview of NASDA's evaluation of commercial nickel metal-hydride (Ni-MH) cells and the development and testing of Ni-MH cells for use in space. The commercial cells are concluded to be feasible and suitable for use in LEO; for GEO, the durability for overcharge is needed because long-term charge retention is required. For the aerospace Ni-MH cell design, two activation procedures are applied to evaluate the effect of the difference in the amount of overcharge protection and precharge. Specific energy of the Ni-MH cell is nearly accomplished at 50 Wh/kg. Initial characteristics indicate the effect derived from precharge. Thirty-five amp-hour class Ni-MH cells have good performance for LEO cycle of 25 and 40 percent DOD up to 3000 cycles as similar to commercial cells. The effect of the difference in the amount of overcharge protection will appear in life test.

  16. Optimization of Hydride Rim Formation in Unirradiated Zr 4 Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Shimskey, Rick W.; Hanson, Brady D.; MacFarlan, Paul J.

    2013-09-30

    The purpose of this work is to build on the results reported in the M2 milestone M2FT 13PN0805051, document number FCRD-USED-2013-000151 (Hanson, 2013). In that work, it was demonstrated that unirradiated samples of zircaloy-4 cladding could be pre-hydrided at temperatures below 400°C in pure hydrogen gas and that the growth of hydrides on the surface could be controlled by changing the surface condition of the samples and form a desired hydride rim on the outside diameter of the cladding. The work performed at Pacific Northwest National Laboratory since the issuing of the M2 milestone has focused its efforts to optimize the formation of a hydride rim on available zircaloy-4 cladding samples by controlling temperature variation and gas flow control during pre-hydriding treatments. Surface conditioning of the outside surface was also examined as a variable. The results of test indicate that much of the variability in the hydride thickness is due to temperature variation occurring in the furnaces as well as how hydrogen gas flows across the sample surface. Efforts to examine other alloys, gas concentrations, and different surface conditioning plan to be pursed in the next FY as more cladding samples become available

  17. Mechanochemical synthesis of nanostructured chemical hydrides in hydrogen alloying mills

    Energy Technology Data Exchange (ETDEWEB)

    Wronski, Z. [CANMET' s Materials Technology Laboratory, Natural Resources Canada, Ottawa (Canada) and Department of Mechanical Engineering, University of Waterloo, Waterloo, Ont., Canada N2L 3G1 (Canada)]. E-mail: zwronski@nrcan.gc.ca; Varin, R.A. [Department of Mechanical Engineering, University of Waterloo, Waterloo, Ont., Canada N2L 3G1 (Canada); Chiu, C. [Department of Mechanical Engineering, University of Waterloo, Waterloo, Ont., Canada N2L 3G1 (Canada); Czujko, T. [Department of Mechanical Engineering, University of Waterloo, Waterloo, Ont., Canada N2L 3G1 (Canada); Calka, A. [Department of Materials Science and Engineering, University of Wollongong, NSW 2518 (Australia)

    2007-05-31

    Mechanical alloying of magnesium metal powders with hydrogen in specialized hydrogen ball mills can be used as a direct route for mechanochemical synthesis of emerging chemical hydrides and hydride mixtures for advanced solid-state hydrogen storage. In the 2Mg-Fe system, we have successfully synthesized the ternary complex hydride Mg{sub 2}FeH{sub 6} in a mixture with nanometric Fe particles. The mixture of complex magnesium-iron hydride and nano-iron released 3-4 wt.%H{sub 2} in a thermally programmed desorption experiment at the range 285-295 {sup o}C. Milling of the Mg-2Al powder mixture revealed a strong competition between formation of the Al(Mg) solid solution and the {beta}-MgH{sub 2} hydride. The former decomposes upon longer milling as the Mg atoms react with hydrogen to form the hydride phase, and drive the Al out of the solid solution. The mixture of magnesium dihydride and nano-aluminum released 2.1 wt.%H{sub 2} in the temperature range 329-340 {sup o}C in the differential scanning calorimetry experiment. The formation of MgH{sub 2} was suppressed in the Mg-B system; instead, a hydrogenated amorphous phase (Mg,B)H {sub x}, was formed in a mixture with nanometric MgB{sub 2}. Annealing of the hydrogen-stabilized amorphous mixture produced crystalline MgB{sub 2}.

  18. Metal Hydrides for High-Temperature Power Generation

    Directory of Open Access Journals (Sweden)

    Ewa C. E. Rönnebro

    2015-08-01

    Full Text Available Metal hydrides can be utilized for hydrogen storage and for thermal energy storage (TES applications. By using TES with solar technologies, heat can be stored from sun energy to be used later, which enables continuous power generation. We are developing a TES technology based on a dual-bed metal hydride system, which has a high-temperature (HT metal hydride operating reversibly at 600–800 °C to generate heat, as well as a low-temperature (LT hydride near room temperature that is used for hydrogen storage during sun hours until there is the need to produce electricity, such as during night time, a cloudy day or during peak hours. We proceeded from selecting a high-energy density HT-hydride based on performance characterization on gram-sized samples scaled up to kilogram quantities with retained performance. COMSOL Multiphysics was used to make performance predictions for cylindrical hydride beds with varying diameters and thermal conductivities. Based on experimental and modeling results, a ~200-kWh/m3 bench-scale prototype was designed and fabricated, and we demonstrated the ability to meet or exceed all performance targets.

  19. Novel fuel cell stack with coupled metal hydride containers

    Science.gov (United States)

    Liu, Zhixiang; Li, Yan; Bu, Qingyuan; Guzy, Christopher J.; Li, Qi; Chen, Weirong; Wang, Cheng

    2016-10-01

    Air-cooled, self-humidifying hydrogen fuel cells are often used for backup and portable power sources, with a metal hydride used as the hydrogen storage material. To provide a stable hydrogen flow to the fuel cell stack, heat must be provided to the metal hydride. Conventionally, the heat released from the exothermic reaction of hydrogen and oxygen in the fuel cell stack to the exhaust air is used to heat a separate metal hydride container. In this case, the heat is only partially used instead of being more closely coupled because of the heat transfer resistances in the system. To achieve better heat integration, a novel scheme is proposed whereby hydrogen storage and single fuel cells are more closely coupled. Based on this idea, metal hydride containers in the form of cooling plates were assembled between each pair of cells in the stack so that the heat could be directly transferred to a metal hydride container of much larger surface-to-volume ratio than conventional separate containers. A heat coupled fuel cell portable power source with 10 cells and 11 metal hydride containers was constructed and the experimental results show that this scheme is beneficial for the heat management of fuel cell stack.

  20. The use of metal hydrides in fuel cell applications

    Directory of Open Access Journals (Sweden)

    Mykhaylo V. Lototskyy

    2017-02-01

    Full Text Available This paper reviews state-of-the-art developments in hydrogen energy systems which integrate fuel cells with metal hydride-based hydrogen storage. The 187 reference papers included in this review provide an overview of all major publications in the field, as well as recent work by several of the authors of the review. The review contains four parts. The first part gives an overview of the existing types of fuel cells and outlines the potential of using metal hydride stores as a source of hydrogen fuel. The second part of the review considers the suitability and optimisation of different metal hydrides based on their energy efficient thermal integration with fuel cells. The performances of metal hydrides are considered from the viewpoint of the reversible heat driven interaction of the metal hydrides with gaseous H2. Efficiencies of hydrogen and heat exchange in hydrogen stores to control H2 charge/discharge flow rates are the focus of the third section of the review and are considered together with metal hydride – fuel cell system integration issues and the corresponding engineering solutions. Finally, the last section of the review describes specific hydrogen-fuelled systems presented in the available reference data.

  1. Metallographic and fractographic observations of hydrides during delayed hydride cracking in Zr-2.5% Nb alloy

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, M.T.; Eadie, R.L. [Univ. of Alberta, Edmonton, Alberta (Canada). Dept. of Chemical and Materials Engineering; Shek, G.K.; Seahra, H. [Ontario Hydro Technologies, Toronto, Ontario (Canada)

    1998-01-01

    Potential drop measurements, optical microscopy, and scanning electron microscopy were performed to study the mechanism of delayed hydride cracking (DHC), the relation of the fracture to the hydride morphology, and the fractography of the DHC mechanism. The material used in this study was taken from modified extrusions of the material used to manufacture Zr-2.5% Nb pressure tubes. The material was electrolytically hydrided to approximately 60 {micro}g/g before testing. Cracking tests were carried out at 250 C with an applied K{sub 1} of 12 MPa {radical}m. The number of potential jumps was strongly correlated to the number of striations on the fracture surface. The results indicate that the DHC process occurs in these samples in an intermittent fashion. Brittle fracture is the operating fracture mechanism for the hydrides that cover most of the fracture surface, but there are some regions of ductile fracture both within the fracture and at the striations.

  2. Cytochrome P450BM-3 reduces aldehydes to alcohols through a direct hydride transfer

    Energy Technology Data Exchange (ETDEWEB)

    Kaspera, Ruediger; Sahele, Tariku; Lakatos, Kyle [Department of Medicinal Chemistry, University of Washington, Box 357610, Seattle, WA 98195-7610 (United States); Totah, Rheem A., E-mail: rtotah@u.washington.edu [Department of Medicinal Chemistry, University of Washington, Box 357610, Seattle, WA 98195-7610 (United States)

    2012-02-17

    Highlights: Black-Right-Pointing-Pointer Cytochrome P450BM-3 reduced aldehydes to alcohols efficiently (k{sub cat} {approx} 25 min{sup -1}). Black-Right-Pointing-Pointer Reduction is a direct hydride transfer from R-NADP{sup 2}H to the carbonyl moiety. Black-Right-Pointing-Pointer P450 domain variants enhance reduction through potential allosteric/redox interactions. Black-Right-Pointing-Pointer Novel reaction will have implications for metabolism of xenobiotics. -- Abstract: Cytochrome P450BM-3 catalyzed the reduction of lipophilic aldehydes to alcohols efficiently. A k{sub cat} of {approx}25 min{sup -1} was obtained for the reduction of methoxy benzaldehyde with wild type P450BM-3 protein which was higher than in the isolated reductase domain (BMR) alone and increased in specific P450-domain variants. The reduction was caused by a direct hydride transfer from preferentially R-NADP{sup 2}H to the carbonyl moiety of the substrate. Weak substrate-P450-binding of the aldehyde, turnover with the reductase domain alone, a deuterium incorporation in the product from NADP{sup 2}H but not D{sub 2}O, and no inhibition by imidazole suggests the reductase domain of P450BM-3 as the potential catalytic site. However, increased aldehyde reduction by P450 domain variants (P450BM-3 F87A T268A) may involve allosteric or redox mechanistic interactions between heme and reductase domains. This is a novel reduction of aldehydes by P450BM-3 involving a direct hydride transfer and could have implications for the metabolism of endogenous substrates or xenobiotics.

  3. Hydrogen bonding to carbonyl hydride complex Cp*Mo(PMe(3))(2)(CO)H and its role in proton transfer.

    Science.gov (United States)

    Dub, Pavel A; Filippov, Oleg A; Belkova, Natalia V; Daran, Jean-Claude; Epstein, Lina M; Poli, Rinaldo; Shubina, Elena S

    2010-02-28

    The interaction of the carbonyl hydride complex Cp*Mo(PMe(3))(2)(CO)H with Brønsted (fluorinated alcohols, (CF(3))(n)CH(3-n)OH (n = 1-3), and CF(3)COOH) and Lewis (Hg(C(6)F(5))(2), BF(3).OEt(2)) acids was studied by variable temperature IR and NMR ((1)H, (31)P, (13)C) spectroscopies in combination with DFT/B3LYP calculations. Among the two functionalities potentially capable of the interaction - carbonyl and hydride ligands - the first was found to be the preferential binding site for weak acids, yielding CO...HOR or CO...Hg complexes as well as CO...(HOR)(2) adducts. For stronger proton donors ((CF(3))(3)COH, CF(3)COOH) hydrogen-bonding to the hydride ligand can be revealed as an intermediate of the proton transfer reaction. Whereas proton transfer to the CO ligand is not feasible, protonation of the hydride ligand yields an (eta(2)-H(2)) complex. Above 230 K dihydrogen evolution is observed leading to decomposition. Among the decomposition products compound [Cp*Mo(PMe(3))(3)(CO)](+)[(CF(3))(3)CO.2HOC(CF(3))(3)](-) resulting from a phosphine transfer reaction was characterized by X-ray diffraction. Reaction with BF(3).OEt(2) was found to produce [Cp*Mo(PMe(3))(2)(CO)BF(4)] via initial attack of the hydride ligand.

  4. Next Generation Energetic Materials: New Cluster Hydrides and Metastable Alloys of Aluminum in Very Low Oxidation States

    Science.gov (United States)

    2016-10-01

    studies (M = Mg, Au, Sn, Mo, Ni, Zn) that preliminarily show similarities to the solution chemistry (Fig. 1c). These results show that AlM hydrides and...oxidation chemistry and thermodynamics. Our studies on the oxidation of Li2Al3(PPh2)61- showed that initial reactivity occurs at the reduced...nanoparticle nucleation on functionalized graphene surfactants from aluminum monochloride solutions. This data shows a strong affinity of AlCl units for

  5. IPR 2016. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-05-15

    The volume on the meeting of pediatric radiology includes abstract on the following issues: chest, cardiovascular system, neuroradiology, CT radiation DRs (diagnostic reference levels) and dose reporting guidelines, genitourinary imaging, gastrointestinal radiology, oncology an nuclear medicine, whole body imaging, fetal/neonates imaging, child abuse, oncology and hybrid imaging, value added imaging, muscoskeletal imaging, dose and radiation safety, imaging children - immobilization and distraction techniques, information - education - QI and healthcare policy, ALARA, the knowledge skills and competences for a technologist/radiographer in pediatric radiology, full exploitation of new technological features in pediatric CT, image quality issues in pediatrics, abdominal imaging, interventional radiology, MR contrast agents, tumor - mass imaging, cardiothoracic imaging, ultrasonography.

  6. ESPR 2015. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-05-10

    The volume includes the abstracts of the ESPR 2015 covering the following topics: PCG (post graduate courses): Radiography; fluoroscopy and general issue; nuclear medicine, interventional radiology and hybrid imaging, pediatric CT, pediatric ultrasound; MRI in childhood. Scientific sessions and task force sessions: International aspects; neuroradiology, neonatal imaging, engineering techniques to simulate injury in child abuse, CT - dose and quality, challenges in the chest, cardiovascular and chest, muscoskeletal, oncology, pediatric uroradiology and abdominal imaging, fetal and postmortem imaging, education and global challenges, neuroradiology - head and neck, gastrointestinal and genitourinary.

  7. ABSTRACTS AND KEY WORDS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Establishment of a Method for Content Determination of Polysaccharide in Membranous milkveteh root Applied in Fisheries Yu Xiao-qing et al. (1) Abstract Some chemical component in the traditional Chinese medicine Membranous milkvetch root can improve the ability of disease-prevention of animal and it can be applied in fisheries. In the paper, the method about content determination of polysaccharide in the root was established based on orthogonal experimental design Key words medicine; polysaccharide in Membranous milkvetch root; method of determination

  8. Abstracts of Major Articles

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On Problems in Fujian's Present Health Insurance Professionals and Related Suggestions LIN Deng-hui,WU Xiao-nan (School of Public Health, Fujian Medical University, Fuzhou 350108, China) Abstract:Based on a statistical analysis of questionnaire survey data collected from practitioners in Fu- jian's medical insurance management system, the paper discusses the problems relevant to the staff's qua lity structure in this industry as well as mechanisms for continuing education and motivation. Finally, the authors advance such suggestions as increasing the levels of practitioner's expertise and working capacity by developing disciplinary education and continuing motivated with a well-established motivation system. education, and encouraging employees to get highly

  9. SPR 2017. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-05-15

    The conference proceedings SPR 2017 include abstracts on the following issues: gastrointestinal radiography - inflammatory bowel diseases, cardiovascular CTA, general muscoskeletal radiology, muscoskeletal congenital development diseases, general pediatric radiology - chest, muscoskeletal imaging - marrow and infectious disorders, state-of-the-art body MR imaging, practical pediatric sonography, quality and professionalism, CT imaging in congenital heart diseases, radiographic courses, body MT techniques, contrast enhanced ultrasound, machine learning, forensic imaging, the radiation dos conundrum - reconciling imaging, imagining and managing, the practice of radiology, interventional radiology, neuroradiology, PET/MR.

  10. Elements of abstract algebra

    CERN Document Server

    Clark, Allan

    1984-01-01

    This concise, readable, college-level text treats basic abstract algebra in remarkable depth and detail. An antidote to the usual surveys of structure, the book presents group theory, Galois theory, and classical ideal theory in a framework emphasizing proof of important theorems.Chapter I (Set Theory) covers the basics of sets. Chapter II (Group Theory) is a rigorous introduction to groups. It contains all the results needed for Galois theory as well as the Sylow theorems, the Jordan-Holder theorem, and a complete treatment of the simplicity of alternating groups. Chapter III (Field Theory)

  11. Building Safe Concurrency Abstractions

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    2014-01-01

    into the notions of concurrent and alternating objects. Alternating objects may be used to start a cooperative thread for each possible blocking communication and is thus an alternative to asynchronous messages and guarded commands. Beta like SIMULA, the first OO language, was designed as a language for modeling...... as well as programming, and we describe how this has had an impact on the design of the language. Although Beta supports the definition of high-level concurrency abstractions, the use of these rely on the discipline of the programmer as is the case for Java and other mainstream OO languages. We introduce...

  12. A quantitative phase field model for hydride precipitation in zirconium alloys: Part II. Modeling of temperature dependent hydride precipitation

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Zhihua [The Hong Kong Polytechnic University, Shenzhen Research Institute, Shenzhen (China); PolyU Base (Shenzhen) Limited, Shenzhen (China); Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China); Hao, Mingjun [The Hong Kong Polytechnic University, Shenzhen Research Institute, Shenzhen (China); Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China); Guo, Xianghua [State Key Laboratory of Explosion and Safety Science, Beijing Institute of Technology, Beijing 100081 (China); Tang, Guoyi [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Shi, San-Qiang, E-mail: mmsqshi@polyu.edu.hk [The Hong Kong Polytechnic University, Shenzhen Research Institute, Shenzhen (China); PolyU Base (Shenzhen) Limited, Shenzhen (China); Department of Mechanical Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China)

    2015-04-15

    A quantitative free energy functional developed in Part I (Shi and Xiao, 2014 [1]) was applied to model temperature dependent δ-hydride precipitation in zirconium in real time and real length scale. At first, the effect of external tensile load on reorientation of δ-hydrides was calibrated against experimental observations, which provides a modification factor for the strain energy in free energy formulation. Then, two types of temperature-related problems were investigated. In the first type, the effect of temperature transient was studied by cooling the Zr–H system at different cooling rates from high temperature while an external tensile stress was maintained. At the end of temperature transients, the average hydride size as a function of cooling rate was compared to experimental data. In the second type, the effect of temperature gradients was studied in a one or two dimensional temperature field. Different boundary conditions were applied. The results show that the hydride precipitation concentrated in low temperature regions and that it eventually led to the formation of hydride blisters in zirconium. A brief discussion on how to implement the hysteresis of hydrogen solid solubility on hydride precipitation and dissolution in the developed phase field scheme is also presented.

  13. Designing metal hydride complexes for water splitting reactions: a molecular electrostatic potential approach.

    Science.gov (United States)

    Sandhya, K S; Suresh, Cherumuttathu H

    2014-08-28

    The hydridic character of octahedral metal hydride complexes of groups VI, VII and VIII has been systematically studied using molecular electrostatic potential (MESP) topography. The absolute minimum of MESP at the hydride ligand (Vmin) and the MESP value at the hydride nucleus (VH) are found to be very good measures of the hydridic character of the hydride ligand. The increasing/decreasing electron donating feature of the ligand environment is clearly reflected in the increasing/decreasing negative character of Vmin and VH. The formation of an outer sphere metal hydride-water complex showing the HH dihydrogen interaction is supported by the location and the value of Vmin near the hydride ligand. A higher negative MESP suggested lower activation energy for H2 elimination. Thus, MESP features provided a way to fine-tune the ligand environment of a metal-hydride complex to achieve high hydridicity for the hydride ligand. The applicability of an MESP based hydridic descriptor in designing water splitting reactions is tested for group VI metal hydride model complexes of tungsten.

  14. EBS Radionuclide Transport Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Schreiber

    2005-08-25

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in ''Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration'' (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment for the license application (TSPA-LA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA-LA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport

  15. Chemical Hydride Slurry for Hydrogen Production and Storage

    Energy Technology Data Exchange (ETDEWEB)

    McClaine, Andrew W

    2008-09-30

    The purpose of this project was to investigate and evaluate the attractiveness of using a magnesium chemical hydride slurry as a hydrogen storage, delivery, and production medium for automobiles. To fully evaluate the potential for magnesium hydride slurry to act as a carrier of hydrogen, potential slurry compositions, potential hydrogen release techniques, and the processes (and their costs) that will be used to recycle the byproducts back to a high hydrogen content slurry were evaluated. A 75% MgH2 slurry was demonstrated, which was just short of the 76% goal. This slurry is pumpable and storable for months at a time at room temperature and pressure conditions and it has the consistency of paint. Two techniques were demonstrated for reacting the slurry with water to release hydrogen. The first technique was a continuous mixing process that was tested for several hours at a time and demonstrated operation without external heat addition. Further work will be required to reduce this design to a reliable, robust system. The second technique was a semi-continuous process. It was demonstrated on a 2 kWh scale. This system operated continuously and reliably for hours at a time, including starts and stops. This process could be readily reduced to practice for commercial applications. The processes and costs associated with recycling the byproducts of the water/slurry reaction were also evaluated. This included recovering and recycling the oils of the slurry, reforming the magnesium hydroxide and magnesium oxide byproduct to magnesium metal, hydriding the magnesium metal with hydrogen to form magnesium hydride, and preparing the slurry. We found that the SOM process, under development by Boston University, offers the lowest cost alternative for producing and recycling the slurry. Using the H2A framework, a total cost of production, delivery, and distribution of $4.50/kg of hydrogen delivered or $4.50/gge was determined. Experiments performed at Boston

  16. Structure–properties relationship in RE{sub 3−x}Mg{sub x}Ni{sub 9}H{sub 10–13} (RE = La,Pr,Nd) hydrides for energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Yartys, Volodymyr, E-mail: volodymyr.yartys@ife.no [Department of Energy Systems, Institute for Energy Technology, Kjeller NO 2027 (Norway); Department of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim NO 7491 (Norway); Denys, Roman [Department of Energy Systems, Institute for Energy Technology, Kjeller NO 2027 (Norway)

    2015-10-05

    Highlights: • Increase of Mg content in the RE{sub 3−x}Mg{sub x}Ni{sub 9} causes gradual shrinking of the cells. • The highest solubility range of Mg in RENi{sub 3} is REMg{sub 2}Ni{sub 9}. • An increase in Mg, Pr and Nd content reduces stability of the hydrides. • NPD showed a nearly equal distribution of D within the Laves and RENi{sub 5} type layers. • H-sublattice is locally ordered ad contains MgH{sub 6} octahedra and NiH{sub 4} tetrahedra. - Abstract: Ternary RE{sub 3−x}Mg{sub x}Ni{sub 9} intermetallics are promising battery electrode materials. Studies of the structure–properties relationships in the (La,Pr,Nd){sub 3−x}Mg{sub x}Ni{sub 9}H{sub 10–13} hydrides and initial intermetallics revealed the following: (a) Increase of magnesium content causes a gradual shrinking of the trigonal unit cells (a, c, V) for all studied RE metals, with the highest solubility range of Mg reached in REMg{sub 2}Ni{sub 9}; (b) Significant lowering of the thermodynamic stability follows an increase in magnesium content from x = 1.0 to 1.1–1.2 and a replacement of La by Pr and Nd, with desorption pressures changing in a broad range, from 0.01 bar to 20 bar H{sub 2}; (c) Neutron powder diffraction shows a nearly equal distribution of D atoms within the REMgNi{sub 4} and RENi{sub 5} layers; (d) Local hydrogen ordering occurs within the H-sublattice built from MgH{sub 6} octahedra and NiH{sub 4} tetrahedra displaying a directional metal–hydrogen bonding. A partial substitution of Mg for RE allows the electrochemical discharge capacity of the (La,Pr,Nd){sub 3−x}Mg{sub x}Ni{sub 9} hydrides to become 25% greater than that of the commercial AB{sub 5}-type electrodes, reaching 400 mA h/g. Synthesis of the materials with a high degree of homogeneity is important and has been achieved by choosing an appropriate synthesis route, content of Mg in the initial mixtures, and time and temperature of the homogenisation process.

  17. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts; 7. Seminario anual de iniciacao cientifica do Centro de Desenvolvimento da Tecnologia Nuclear. Resumos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques.

  18. Writing a successful research abstract.

    Science.gov (United States)

    Bliss, Donna Z

    2012-01-01

    Writing and submitting a research abstract provides timely dissemination of the findings of a study and offers peer input for the subsequent development of a quality manuscript. Acceptance of abstracts is competitive. Understanding the expected content of an abstract, the abstract review process and tips for skillful writing will improve the chance of acceptance.

  19. ABSTRACTS AND KEY WORDS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Determination of the Estrogen Alkylphenols and Bisphenol A in Marine Sediments by Gas Chromatography-Mass Spectrometry Deng Xu-xiu et al. (1) Abstract Octylphenol, nonylphenol and bisphenol A are recognized environmental endocrine disruptors. A quantitative method was established for the simultaneous determination of octylphenol, nonylphenol and bisphenol A in marine sediments by gas chromatography-mass spectrometry. The test sample was extracted by methanol with ultrasonic technique, purified with copper powder and carbon solid phase extraction column, and derived with heptafluorobutyric anhydride. Then the analytes were separated on HP-5ms column and determined by gas chromatography-mass. The recovery of the method was between 84.3% and 94.5%, and the LOQ of 4-N- octylphenol, nonylphenol and bisphenol A was 0.25 g/kg, 0.15 g/kg and 0.15 g/kg. Key words octylphenol; nonylphenol; bisphenol A; gas chromatography-mass spectrometry

  20. ABSTRACTS AND KEY WORDS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Acute Toxicity Test of Four Drugs to Perch Fries Zhu You-fang et al(1) Abstract Acute toxicity test of four drugs to perch Lateolabrax maculates were studied. The results showed: (1)The LC50 values of perch to copper sulfate was 4.58 mg/L(24h), 2.93 mg/ L(48h), 1.81 mg/L(72h) and 0.78 mg/L (96h) respectively; to SHA CHONG WEI was 35.11 mg/ L(24h), 15.81 mg/L(48h), 11.20 mg/L(72h), 9.36 mg/ L (96h)respectively;

  1. Abstracts of Selected Papers

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On the Social Solidarity of Organization An Empirical Analysis Li Hanlin Abstract: Based on the 2002 survey data, this paper tries to measure solidarity in organization. The operationalization for this measurement goes from two points of view. One is from the degree of cohesion and another one is from the degree of vulnerability. To observe and measure the degree of cohesion three subscales like social support, vertical integration and organizational identity have been used. To observe and measure the degree of vulnerability other three subscales like dissatisfaction, relative deprivation and anomie have been used. The paper tries to explore finally under which condition the organization behavior and behavior orientation could go to the similarity or make some difference. Key words: Organization Cohesion Vulnerability Organization Behavior

  2. Contents and Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    [Ancient Mediterranean Civilizations] Title: On Poseidon's Image in Homeric Epics Author: Zhu Yizhang, Lecturer, School of History and Culture, Shandong University, Jinan, Shandong, 250100, China. Abstract: Poseidon was an important role in religion, myth and literature of ancient Greece. His religious functions, and status in mythical image in literature were mainly established by Homeric Epics. Poseidon doesn't only appear frequently in the Homeric Epics but also influences the development of the plots directly; therefore, he could be seen as one of the most important gods in the Epics. But Homeric Epics do not introduce his basic image clearly. In Homeric Epics, Poseidon carries the deity and humanity aspect of the figure, and the latter was emphasized, which implied his archetype was a mortal wanax.

  3. Problems in abstract algebra

    CERN Document Server

    Wadsworth, A R

    2017-01-01

    This is a book of problems in abstract algebra for strong undergraduates or beginning graduate students. It can be used as a supplement to a course or for self-study. The book provides more variety and more challenging problems than are found in most algebra textbooks. It is intended for students wanting to enrich their learning of mathematics by tackling problems that take some thought and effort to solve. The book contains problems on groups (including the Sylow Theorems, solvable groups, presentation of groups by generators and relations, and structure and duality for finite abelian groups); rings (including basic ideal theory and factorization in integral domains and Gauss's Theorem); linear algebra (emphasizing linear transformations, including canonical forms); and fields (including Galois theory). Hints to many problems are also included.

  4. Numerical simulation and performance test of metal hydride hydrogen storage system

    Directory of Open Access Journals (Sweden)

    Tzu-Hsiang Yen, Bin-Hao Chen, Bao-Dong Chen

    2011-05-01

    Full Text Available Metal hydride reactors are widely used in many industrial applications, such as hydrogen storage, thermal compression, heat pump, etc. According to the research requirement of metal hydride hydrogen storage, the thermal analyses have been implemented in the paper. The metal hydride reaction beds are considered as coupled cylindrical tube modules which combine the chemical absorption and desorption in metal hydride. The model is then used metal hydride LaNi5 as an example to predict the performance of metal hydride hydrogen storage devices, such as the position of hydration front and the thermal flux. Under the different boundary condition the characteristics of heat transfer and mass transfer in metal hydride have influence on the hydrogen absorption and desorption. The researches revealed that the scroll design can improve the temperature distribution in the reactor and the porous tube for directing hydrogen can increase the penetration depth of hydride reaction to decrease the hydrogen absorption time.

  5. Abstract Operators and Higher-order Linear Partial Differential Equation

    Institute of Scientific and Technical Information of China (English)

    BI Guang-qing; BI Yue-kai

    2011-01-01

    We summarize several relevant principles for the application of abstract operators in partial differential equations,and combine abstract operators with the Laplace transform.Thus we have developed the theory of partial differential equations of abstract operators and obtained the explicit solutions of initial value problems for a class of higher-order linear partial differential equations.

  6. Structural and magnetic properties of C15 HoMn{sub 2} hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Budziak, A., E-mail: andrzej.budziak@ifj.edu.pl [H.Niewodniczanski Institute of Nuclear Physics PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Zachariasz, P. [Institute of Atomic Energy POLATOM, 05-400 Otwock-Swierk (Poland); Kolwicz-Chodak, L.; Figiel, H. [Faculty of Physics and Applied Computer Science, University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow (Poland); Pacyna, A. [H.Niewodniczanski Institute of Nuclear Physics PAN, ul. Radzikowskiego 152, 31-342 Krakow (Poland); Zukrowski, J. [Faculty of Physics and Applied Computer Science, University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow (Poland)

    2011-02-03

    Research highlights: > Full structural and magnetic phase diagrams are presented for the HoMn{sub 2}H{sub x}(0 < x {<=} 4.3) hydrides, where x = 4.3 is a typical maximal hydrogen concentration obtained for RMn{sub 2}H{sub x} (R: rare earth) under low pressure of H{sub 2} (ca {approx} 1 bar). > For x < {approx} 1.6: (1) The spinodal decompositions into two structurally different phases are observed. The lattice parameters of one of them correspond to those of the pure host HoMn{sub 2} material, while the lattice parameters of the other phase correspond to those of HoMn{sub 2}H{sub 1.6}. (2) Abundances of both phases change with hydrogen concentration x. (3) No intermediate phase appears, which is typical for other hydrides based on the C15 Laves phase type compounds (e.g. (Tb, Gd)Mn{sub 2}). Instead of that, structural transformations to monoclinic structures are observed. > For x = 2.5 splitting into two phases with different hydrogen concentrations x (x{sub 1} {approx} 2.3 and x{sub 2} {approx} 2.8) appears again, which was observed only for hydrides based on the C14 Laves phase type compounds (e.g. in (Sm, Er, Nd)Mn{sub 2}H{sub x}) in the range 2 < x < 3. > For samples with 2 < x < 2.2 no structural transformations are detected. > The effects of hydrogen absorption on structural properties are shown to be reflected in magnetic behavior. > A huge jump of magnetic ordering temperatures from {approx}24 K for HoMn{sub 2} to {approx} (200-380) K for its hydrides is observed. - Abstract: Powder samples of cubic HoMn{sub 2}H{sub x} hydrides, with 0 {<=} x {<=} 4.3, have been investigated by X-ray diffraction and AC/DC magnetometry as a function of temperature and external magnetic field. Hydrogen is demonstrated to strongly modify structural and magnetic properties. X-ray studies revealed many structural transformations placed at low temperatures. In particular, a transformation from the cubic to the monoclinic structure was detected, which so far has not been reported

  7. Investigation of Cracked Lithium Hydride Reactor Vessels

    Energy Technology Data Exchange (ETDEWEB)

    bird, e.l.; mustaleski, t.m.

    1999-06-01

    Visual examination of lithium hydride reactor vessels revealed cracks that were adjacent to welds, most of which were circumferentially located in the bottom portion of the vessels. Sections were cut from the vessels containing these cracks and examined by use of the metallograph, scanning electron microscope, and microprobe to determine the cause of cracking. Most of the cracks originated on the outer surface just outside the weld fusion line in the base material and propagated along grain boundaries. Crack depths of those examined sections ranged from {approximately}300 to 500 {micro}m. Other cracks were reported to have reached a maximum depth of 1/8 in. The primary cause of cracking was the creation of high tensile stresses associated with the differences in the coefficients of thermal expansion between the filler metal and the base metal during operation of the vessel in a thermally cyclic environment. This failure mechanism could be described as creep-type fatigue, whereby crack propagation may have been aided by the presence of brittle chromium carbides along the grain boundaries, which indicates a slightly sensitized microstructure.

  8. Transition-Metal Hydride Radical Cations.

    Science.gov (United States)

    Hu, Yue; Shaw, Anthony P; Estes, Deven P; Norton, Jack R

    2016-08-10

    Transition-metal hydride radical cations (TMHRCs) are involved in a variety of chemical and biochemical reactions, making a more thorough understanding of their properties essential for explaining observed reactivity and for the eventual development of new applications. Generally, these species may be treated as the ones formed by one-electron oxidation of diamagnetic analogues that are neutral or cationic. Despite the importance of TMHRCs, the generally sensitive nature of these complexes has hindered their development. However, over the last four decades, many more TMHRCs have been synthesized, characterized, isolated, or hypothesized as reaction intermediates. This comprehensive review focuses on experimental studies of TMHRCs reported through the year 2014, with an emphasis on isolated and observed species. The methods used for the generation or synthesis of TMHRCs are surveyed, followed by a discussion about the stability of these complexes. The fundamental properties of TMHRCs, especially those pertaining to the M-H bond, are described, followed by a detailed treatment of decomposition pathways. Finally, reactions involving TMHRCs as intermediates are described.

  9. Comparison of the interactions in the rare gas hydride and Group 2 metal hydride anions.

    Science.gov (United States)

    Harris, Joe P; Manship, Daniel R; Breckenridge, W H; Wright, Timothy G

    2014-02-28

    We study both the rare gas hydride anions, RG-H(-) (RG = He-Rn) and Group 2 (Group IIa) metal hydride anions, MIIaH(-) (MIIa = Be-Ra), calculating potential energy curves at the CCSD(T) level with augmented quadruple and quintuple basis sets, and extrapolating the results to the basis set limit. We report spectroscopic parameters obtained from these curves; additionally, we study the Be-He complex. While the RG-H(-) and Be-He species are weakly bound, we show that, as with the previously studied BeH(-) and MgH(-) species, the other MIIaH(-) species are strongly bound, despite the interactions nominally also being between two closed shell species: M(ns(2)) and H(-)(1s(2)). We gain insight into the interactions using contour plots of the electron density changes and population analyses. For both series, the calculated dissociation energy is significantly less than the ion/induced-dipole attraction term, confirming that electron repulsion is important in these species; this effect is more dramatic for the MIIaH(-) species than for RG-H(-). Our analyses lead us to conclude that the stronger interaction in the case of the MIIaH(-) species arises from sp and spd hybridization, which allows electron density on the MIIa atom to move away from the incoming H(-).

  10. Multidimensional simulations of hydrides during fuel rod lifecycle

    Science.gov (United States)

    Stafford, D. S.

    2015-11-01

    In light water reactor fuel rods, waterside corrosion of zirconium-alloy cladding introduces hydrogen into the cladding, where it is slightly soluble. When the solubility limit is reached, the hydrogen precipitates into crystals of zirconium hydride which decrease the ductility of the cladding and may lead to cladding failure during dry storage or transportation events. The distribution of the hydride phase and the orientation of the crystals depend on the history of the spatial temperature and stress profiles in the cladding. In this work, we have expanded the existing hydride modeling capability in the BISON fuel performance code with the goal of predicting both global and local effects on the radial, azimuthal and axial distribution of the hydride phase. We compare results from 1D simulations to published experimental data. We demonstrate the new capability by simulating in 2D a fuel rod throughout a lifecycle that includes irradiation, short-term storage in the spent fuel pool, drying, and interim storage in a dry cask. Using the 2D simulations, we present qualitative predictions of the effects of the inter-pellet gap and the drying conditions on the growth of a hydride rim.

  11. Sodium-based hydrides for thermal energy applications

    Science.gov (United States)

    Sheppard, D. A.; Humphries, T. D.; Buckley, C. E.

    2016-04-01

    Concentrating solar-thermal power (CSP) with thermal energy storage (TES) represents an attractive alternative to conventional fossil fuels for base-load power generation. Sodium alanate (NaAlH4) is a well-known sodium-based complex metal hydride but, more recently, high-temperature sodium-based complex metal hydrides have been considered for TES. This review considers the current state of the art for NaH, NaMgH3- x F x , Na-based transition metal hydrides, NaBH4 and Na3AlH6 for TES and heat pumping applications. These metal hydrides have a number of advantages over other classes of heat storage materials such as high thermal energy storage capacity, low volume, relatively low cost and a wide range of operating temperatures (100 °C to more than 650 °C). Potential safety issues associated with the use of high-temperature sodium-based hydrides are also addressed.

  12. Abstracts: Energy Sciences programs, January--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    This report presents abstracts of all publications in the Energy Sciences programs of the Department of Energy and Environment from January 1, 1978 through December 31, 1978. It is a companion report to Annual Highlights of Programs in Energy Sciences - (December 1978, BNL 50973). Together, they present scientific and/or technical highlights of the Energy Sciences programs for the past calendar year, detailed descriptions of all the programs, and the publication issuing from the work performed. The following are some of the topics included: porphyrin chemistry; chemistry of energetic compounds; combustion; coal utilization; metal hydrides; cyclic separations process research; trace element analysis; materials properties and structures; radiation damage; superconducting materials; materials of construction for geothermal applications; repair of deteriorated concrete; development of glass--polymer composite sewer pipe; flash hydropyrolysis of coal; desulfurization of high-temperature combustion and fuel gases; and synthetic fuels development. (RWR)

  13. Abstracts: Energy Sciences programs, January--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    This report presents abstracts of all publications in the Energy Sciences programs of the Department of Energy and Environment from January 1, 1978 through December 31, 1978. It is a companion report to Annual Highlights of Programs in Energy Sciences - (December 1978, BNL 50973). Together, they present scientific and/or technical highlights of the Energy Sciences programs for the past calendar year, detailed descriptions of all the programs, and the publication issuing from the work performed. The following are some of the topics included: porphyrin chemistry; chemistry of energetic compounds; combustion; coal utilization; metal hydrides; cyclic separations process research; trace element analysis; materials properties and structures; radiation damage; superconducting materials; materials of construction for geothermal applications; repair of deteriorated concrete; development of glass--polymer composite sewer pipe; flash hydropyrolysis of coal; desulfurization of high-temperature combustion and fuel gases; and synthetic fuels development. (RWR)

  14. Erroneous Wave Functions of Ciuchi et al for Collective Modes in Neutron Production on Metallic Hydride Cathodes

    CERN Document Server

    Widom, A; Larsen, L

    2012-01-01

    There is a recent comment (Ciuchi et al., 2012) concerning the theory of collective many body effects on the neutron production rates in a chemical battery cathode. Ciuchi et al employ an inverse beta decay expression that contains a two body amplitude. Only one electron and one proton may exist in the Ciuchi et al model initial state wave function. A flaw in their reasoning is that one cannot in reality describe collective many body correlations with only a two particle wave function. One needs very many particles to describe collective effects. In the model wave functions of Ciuchi et al there are no metallic hydrides, there are no cathodes and there are no chemical batteries. Employing a wave function with only one electron and one proton is inadequate for describing collective metallic hydride surface quantum plasma physics in cathodes accurately.

  15. Comparison of Hydrogen Elimination from Molecular Zinc and Magnesium Hydride Clusters

    NARCIS (Netherlands)

    Intemann, J.; Sirsch, Peter; Harder, Sjoerd

    2014-01-01

    In analogy to the previously reported tetranuclear magnesium hydride cluster with a bridged dianionic bis-beta-diketiminate ligand, a related zinc hydride cluster has been prepared. The crystal structures of these magnesium and zinc hydride complexes are similar: the metal atoms are situated at the

  16. Use of triammonium salt of aurin tricarboxylic acid as risk mitigant for aluminum hydride

    Science.gov (United States)

    Cortes-Concepcion, Jose A.; Anton, Donald L.

    2017-08-08

    A process and a resulting product by process of an aluminum hydride which is modified with by physically combining in a ball milling process an aluminum hydride with a triammonium salt of aurin tricarboxylic acid. The resulting product is an aluminum hydride which is resistant to air, ambient moisture, and liquid water while maintaining useful hydrogen storage and release kinetics.

  17. Comparison of Hydrogen Elimination from Molecular Zinc and Magnesium Hydride Clusters

    NARCIS (Netherlands)

    Intemann, J.; Sirsch, Peter; Harder, Sjoerd

    2014-01-01

    In analogy to the previously reported tetranuclear magnesium hydride cluster with a bridged dianionic bis-beta-diketiminate ligand, a related zinc hydride cluster has been prepared. The crystal structures of these magnesium and zinc hydride complexes are similar: the metal atoms are situated at the

  18. Investigation of metal hydride materials as hydrogen reservoirs for metal-hydrogen batteries

    Science.gov (United States)

    ONISCHAK

    1976-01-01

    The performance and suitability of various metal hydride materials were examined for use as possible hydrogen storage reservoirs for secondary metal-hydrogen batteries. Lanthanum pentanickel hydride appears as a probable candidate in terms of stable hydrogen supply under feasible thermal conditions. A kinetic model describing the decomposition rate data of the hydride has been developed.

  19. Exoplanets and Multiverses (Abstract)

    Science.gov (United States)

    Trimble, V.

    2016-12-01

    (Abstract only) To the ancients, the Earth was the Universe, of a size to be crossed by a god in a day, by boat or chariot, and by humans in a lifetime. Thus an exoplanet would have been a multiverse. The ideas gradually separated over centuries, with gradual acceptance of a sun-centered solar system, the stars as suns likely to have their own planets, other galaxies beyond the Milky Way, and so forth. And whenever the community divided between "just one' of anything versus "many," the "manies" have won. Discoveries beginning in 1991 and 1995 have gradually led to a battalion or two of planets orbiting other stars, very few like our own little family, and to moderately serious consideration of even larger numbers of other universes, again very few like our own. I'm betting, however, on habitable (though not necessarily inhabited) exoplanets to be found, and habitable (though again not necessarily inhabited) universes. Only the former will yield pretty pictures.

  20. Automated Supernova Discovery (Abstract)

    Science.gov (United States)

    Post, R. S.

    2015-12-01

    (Abstract only) We are developing a system of robotic telescopes for automatic recognition of Supernovas as well as other transient events in collaboration with the Puckett Supernova Search Team. At the SAS2014 meeting, the discovery program, SNARE, was first described. Since then, it has been continuously improved to handle searches under a wide variety of atmospheric conditions. Currently, two telescopes are used to build a reference library while searching for PSN with a partial library. Since data is taken every night without clouds, we must deal with varying atmospheric and high background illumination from the moon. Software is configured to identify a PSN, reshoot for verification with options to change the run plan to acquire photometric or spectrographic data. The telescopes are 24-inch CDK24, with Alta U230 cameras, one in CA and one in NM. Images and run plans are sent between sites so the CA telescope can search while photometry is done in NM. Our goal is to find bright PSNs with magnitude 17.5 or less which is the limit of our planned spectroscopy. We present results from our first automated PSN discoveries and plans for PSN data acquisition.

  1. Judgement of abstract paintings

    Directory of Open Access Journals (Sweden)

    Dakulović Sandra

    2006-01-01

    Full Text Available In two experiments the judgement of twenty one abstract paintings was investigated. In Experiment 1, subjects were asked to make similarity judgements of 210 pairs of paintings on a 7 step bipolar scale (similar-dissimilar. The Multi-dimensional scaling (MDS method was used for data analysis. The distribution of paintings within MDS 2-D space suggested two grouping criteria: colorfullness (e.g. from Klee to Kline and geometrization (e.g. from Vasarely to Kandinsky. In Experiment 2, subjects were asked to judge the same paintings on three factors of the instrument SDF 9 (Marković et al., 2002b: Evaluation, Arousal and Regularity. The purpose of this experiment was to specify the subjective criteria on which the (dissimilarity judgements were based. In the regression analysis the three factors of SDF 9 were defined as predictors, whereas the x and y coordinates of MDS 2-D space were defined as dependent variables. The results have shown that the dimension x was reducible to the Evaluation factor, and dimension y is reducible to the Regularity factor.

  2. A Brief Introduction to Chinese Biological Abstracts

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Chinese Biological Abstracts sponsored by the Library, the Shanghai Institutes for Biological Sciences, the Biological Documentation and Information Network, all of the Chinese Academy of Sciences, commenced publication in 1987 and was initiated to provide access to the Chinese information in the field of biology.

  3. A study of advanced magnesium-based hydride and development of a metal hydride thermal battery system

    Science.gov (United States)

    Zhou, Chengshang

    Metal hydrides are a group of important materials known as energy carriers for renewable energy and thermal energy storage. A concept of thermal battery based on advanced metal hydrides is studied for heating and cooling of cabins in electric vehicles. The system utilizes a pair of thermodynamically matched metal hydrides as energy storage media. The hot hydride that is identified and developed is catalyzed MgH2 due to its high energy density and enhanced kinetics. TiV0.62Mn1.5, TiMn2, and LaNi5 alloys are selected as the matching cold hydride. A systematic experimental survey is carried out in this study to compare a wide range of additives including transitions metals, transition metal oxides, hydrides, intermetallic compounds, and carbon materials, with respect to their effects on dehydrogenation properties of MgH2. The results show that additives such as Ti and V-based metals, hydride, and certain intermetallic compounds have strong catalytic effects. Solid solution alloys of magnesium are exploited as a way to destabilize magnesium hydride thermodynamically. Various elements are alloyed with magnesium to form solid solutions, including indium and aluminum. Thermodynamic properties of the reactions between the magnesium solid solution alloys and hydrogen are investigated, showing that all the solid solution alloys that are investigated in this work have higher equilibrium hydrogen pressures than that of pure magnesium. Cyclic stability of catalyzed MgH2 is characterized and analyzed using a PCT Sievert-type apparatus. Three systems, including MgH2-TiH 2, MgH2-TiMn2, and MgH2-VTiCr, are examined. The hydrogenating and dehydrogenating kinetics at 300°C are stable after 100 cycles. However, the low temperature (25°C to 150°C) hydrogenation kinetics suffer a severe degradation during hydrogen cycling. Further experiments confirm that the low temperature kinetic degradation can be mainly related the extended hydrogenation-dehydrogenation reactions. Proof

  4. Decomposition kinetics study of zirconium hydride by interrupted thermal desorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Mingwang; Liang, Li; Tang, Binghua; Xiang, Wei; Wang, Yuan; Cheng, Yanlin; Tan, Xiaohua, E-mail: caepiee@163.com

    2015-10-05

    Highlights: • Interrupted TDS was applied to investigate the mechanism of ZrH{sub 2} decomposition. • The activation energies for the five desorption peaks were determined. • The origins of the five desorption peaks were identified. • The γZrH phase was observed at ambient conditions. - Abstract: Thermal desorption kinetics of zirconium hydride powder were studied using thermogravimetry and simultaneous thermal desorption spectroscopy. The activation energies for observed desorption peaks were estimated according to Kissinger relation. The intermediate phase composition was studied using X-ray diffraction by rapid cooling on different stages of heating. The origins of the peaks were described as the equilibrium hydrogen pressure of a number of consecutive phase regions that decomposition reaction passed through. The zirconium monohydride γZrH was observed for extended periods of time at ambient conditions, which has been supposed to be metastable for a long time.

  5. Iron Hydride Detection and Intramolecular Hydride Transfer in a Synthetic Model of Mono-Iron Hydrogenase with a CNS Chelate.

    Science.gov (United States)

    Durgaprasad, Gummadi; Xie, Zhu-Lin; Rose, Michael J

    2016-01-19

    We report the identification and reactivity of an iron hydride species in a synthetic model complex of monoiron hydrogenase. The hydride complex is derived from a phosphine-free CNS chelate that includes a Fe-C(NH)(═O) bond (carbamoyl) as a mimic of the active site iron acyl. The reaction of [((O═)C(HN)N(py)S(Me))Fe(CO)2(Br)] (1) with NaHBEt3 generates the iron hydride intermediate [((O═)C(HN)N(py)S(Me))Fe(H)(CO)2] (2; δFe-H = -5.08 ppm). Above -40 °C, the hydride species extrudes CH3S(-) via intramolecular hydride transfer, which is stoichiometrically trapped in the structurally characterized dimer μ2-(CH3S)2-[((O═)C(HN)N(Ph))Fe(CO)2]2 (3). Alternately, when activated by base ((t)BuOK), 1 undergoes desulfurization to form a cyclometalated species, [((O═)C(NH)NC(Ph))Fe(CO)2] (5); derivatization of 5 with PPh3 affords the structurally characterized species [((O═)C(NH)NC)Fe(CO)(PPh3)2] (6), indicating complex 6 as the common intermediate along each pathway of desulfurization.

  6. Simultaneous determination of hydride and non-hydride forming elements by inductively coupled plasma optical emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Benzo, Z. [Instituto Venezolano de Investigaciones Cientificas, IVIC, Altos de Pipe, Caracas (Venezuela, Bolivarian Republic of); Matos-Reyes, M.N.; Cervera, M.L.; Guardia, M. de la, E-mail: m.luisa.cervera@uv.es [Department of Analytical Chemistry, University of Valencia, Valencia (Spain)

    2011-09-15

    The operating characteristics of a dual nebulization system were studied including instrumental and chemical conditions for the hydride generation and analytical figures of merit for both, hydride and non hydride forming elements. Analytical performance of the nebulization system was characterized by detection limits from 0.002 to 0.0026 {mu}g mL{sup -1} for the hydride forming elements and between 0.0034 and 0.0121 {mu}g mL{sup -1} for the non-hydride forming elements, relative standard deviation for 10 replicate measurements at 0.25 mg L{sup -1} level and recovery percentages between 97 and 103%. The feasibility of the system was demonstrated in the simultaneous determination of Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Zn, As, Bi, Sb, Se, and Te in the NIST 1549 (non-fat milk powder), NIST 1570a (spinach leaves), DORM-2 (dogfish muscle) and TORT-2 (lobster hepatopancreas) certified samples for trace elements. Results found were in good agreement with the certified ones. (author)

  7. Mechanistic Insights into Ring Cleavage and Contraction of Benzene over a Titanium Hydride Cluster.

    Science.gov (United States)

    Kang, Xiaohui; Luo, Gen; Luo, Lun; Hu, Shaowei; Luo, Yi; Hou, Zhaomin

    2016-09-14

    Carbon-carbon bond cleavage of benzene by transition metals is of great fundamental interest and practical importance, as this transformation is involved in the production of fuels and other important chemicals in the industrial hydrocracking of naphtha on solid catalysts. Although this transformation is thought to rely on cooperation of multiple metal sites, molecular-level information on the reaction mechanism has remained scarce to date. Here, we report the DFT studies of the ring cleavage and contraction of benzene by a molecular trinuclear titanium hydride cluster. Our studies suggest that the reaction is initiated by benzene coordination, followed by H2 release, C6H6 hydrometalation, repeated C-C and C-H bond cleavage and formation to give a MeC5H4 unit, and insertion of a Ti atom into the MeC5H4 unit with release of H2 to give a metallacycle product. The C-C bond cleavage and ring contraction of toluene can also occur in a similar fashion, though some details are different due to the presence of the methyl substituent. Obviously, the facile release of H2 from the metal hydride cluster to provide electrons and to alter the charge population at the metal centers, in combination with the flexible metal-hydride connections and dynamic redox behavior of the trimetallic framework, has enabled this unusual transformation to occur. This work has not only provided unprecedented insights into the activation and transformation of benzene over a multimetallic framework but it may also offer help in the design of new molecular catalysts for the activation and transformation of inactive aromatics.

  8. Abstract of Main Contents

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    ( 1 ) Mechanical Mechanism Study of Shield Tunnel Floating Up The collected existing monitoring data of shield tunnels illustrate that shield tunnels, especially those with large diameter would float up in a long period after construction. In this paper, it studies the inevitability and mechanical mechanism of floating up of tunnel (its weight is far less than the excavated soil' s) with the recognition that the initial stress state of soil layer is broken during tunnel shield driving and the stress around tunnel is partly released so as to form a kind of "unbalanced" (the upper stress is less than lower stress) stress state.

  9. Investigation of metal hydride nanoparticles templated in metal organic frameworks.

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Benjamin W.; Herberg, Julie L. (Lawrence Livermore National Laboratory, Livermore, CA); Highley, Aaron M.; Grossman, Jeffrey (MIT, Cambridge, MA); Wagner, Lucas (MIT, Cambridge, MA); Bhakta, Raghu; Peaslee, D. (University of Missouri, St. Louis, MO); Allendorf, Mark D.; Liu, X. (University of Missouri, St. Louis, MO); Behrens, Richard, Jr.; Majzoub, Eric H. (University of Missouri, St. Louis, MO)

    2010-11-01

    Hydrogen is proposed as an ideal carrier for storage, transport, and conversion of energy. However, its storage is a key problem in the development of hydrogen economy. Metal hydrides hold promise in effectively storing hydrogen. For this reason, metal hydrides have been the focus of intensive research. The chemical bonds in light metal hydrides are predominantly covalent, polar covalent or ionic. These bonds are often strong, resulting in high thermodynamic stability and low equilibrium hydrogen pressures. In addition, the directionality of the covalent/ionic bonds in these systems leads to large activation barriers for atomic motion, resulting in slow hydrogen sorption kinetics and limited reversibility. One method for enhancing reaction kinetics is to reduce the size of the metal hydrides to nano scale. This method exploits the short diffusion distances and constrained environment that exist in nanoscale hydride materials. In order to reduce the particle size of metal hydrides, mechanical ball milling is widely used. However, microscopic mechanisms responsible for the changes in kinetics resulting from ball milling are still being investigated. The objective of this work is to use metal organic frameworks (MOFs) as templates for the synthesis of nano-scale NaAlH4 particles, to measure the H2 desorption kinetics and thermodynamics, and to determine quantitative differences from corresponding bulk properties. Metal-organic frameworks (MOFs) offer an attractive alternative to traditional scaffolds because their ordered crystalline lattice provides a highly controlled and understandable environment. The present work demonstrates that MOFs are stable hosts for metal hydrides and their reactive precursors and that they can be used as templates to form metal hydride nanoclusters on the scale of their pores (1-2 nm). We find that using the MOF HKUST-1 as template, NaAlH4 nanoclusters as small as 8 formula units can be synthesized inside the pores. A detailed picture of

  10. Theoretical Estimate of Hydride Affinities of Aromatic Carbonyl Compounds

    Institute of Scientific and Technical Information of China (English)

    AI Teng; ZHU Xiao-Qing; CHENG Jin-Pei

    2003-01-01

    @@ Aromatic carbonyl compounds are one type of the most important organic compounds, and the reductions ofthem by hydride agents such as LiAlH4 or NaBH4 are widely used in organic synthesis. The reactivity of carbonyl compounds generally increases in the following order: ketone < aldehyde, and amide < acid < ester < acid halide, which could be related to their hydride affinities (HA). In the previous paper, Robert[1] calculated the absolute HAof a series of small non-aromatic carbonyl compounds. In this paper, we use DFT method at B3LYP/6-311 + + G (2d, 2p)∥B3LYP/6-31 + G* level to estimate hydride affinities of five groups of aromatic carbonyl compounds. The detailed results are listed in Table 1.

  11. A nickel metal hydride battery for electric vehicles.

    Science.gov (United States)

    Ovshinsky, S R; Fetcenko, M A; Ross, J

    1993-04-09

    Widespread use of electric vehicles can have significant impact on urban air quality, national energy independence, and international balance of trade. An efficient battery is the key technological element to the development of practical electric vehicles. The science and technology of a nickel metal hydride battery, which stores hydrogen in the solid hydride phase and has high energy density, high power, long life, tolerance to abuse, a wide range of operating temperature, quick-charge capability, and totally sealed maintenance-free operation, is described. A broad range of multi-element metal hydride materials that use structural and compositional disorder on several scales of length has been engineered for use as the negative electrode in this battery. The battery operates at ambient temperature, is made of nontoxic materials, and is recyclable. Demonstration of the manufacturing technology has been achieved.

  12. CO2 hydrogenation on a metal hydride surface.

    Science.gov (United States)

    Kato, Shunsuke; Borgschulte, Andreas; Ferri, Davide; Bielmann, Michael; Crivello, Jean-Claude; Wiedenmann, Daniel; Parlinska-Wojtan, Magdalena; Rossbach, Peggy; Lu, Ye; Remhof, Arndt; Züttel, Andreas

    2012-04-28

    The catalytic hydrogenation of CO(2) at the surface of a metal hydride and the corresponding surface segregation were investigated. The surface processes on Mg(2)NiH(4) were analyzed by in situ X-ray photoelectron spectroscopy (XPS) combined with thermal desorption spectroscopy (TDS) and mass spectrometry (MS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). CO(2) hydrogenation on the hydride surface during hydrogen desorption was analyzed by catalytic activity measurement with a flow reactor, a gas chromatograph (GC) and MS. We conclude that for the CO(2) methanation reaction, the dissociation of H(2) molecules at the surface is not the rate controlling step but the dissociative adsorption of CO(2) molecules on the hydride surface.

  13. Zirconium hydride formation in Hanford production reactor process tubes

    Energy Technology Data Exchange (ETDEWEB)

    Winegardner, W.K.; Griggs, B.

    1967-12-01

    Examination of Zircaloy-2 process tubes from Hanford Production Reactors has revealed extensive zirconium hydride formation. In general, attack is limited to the downstream portions of tubes where aluminum spacers are located. Most of the hydride platelets are contained in a case or layer on the inner surface of the tube. It is not unusual to find cases 0.004 to 0.005 in. thick. Analyses of the 0.037 in. wall tubes with such cases intact often reveal hydrogen concentrations greater than 1000 ppM. Investigation indicates that the hydriding is the result of galvanic contact between aluminum and Zircaloy-2. The galvanic couple (contact between dissimilar metals in the presence of reactor cooling water which serves as the electrolyte) results in the cathodic charging of hydrogen into the Zircaloy.

  14. Abstraction of Drift Seepage

    Energy Technology Data Exchange (ETDEWEB)

    J.T. Birkholzer

    2004-11-01

    This model report documents the abstraction of drift seepage, conducted to provide seepage-relevant parameters and their probability distributions for use in Total System Performance Assessment for License Application (TSPA-LA). Drift seepage refers to the flow of liquid water into waste emplacement drifts. Water that seeps into drifts may contact waste packages and potentially mobilize radionuclides, and may result in advective transport of radionuclides through breached waste packages [''Risk Information to Support Prioritization of Performance Assessment Models'' (BSC 2003 [DIRS 168796], Section 3.3.2)]. The unsaturated rock layers overlying and hosting the repository form a natural barrier that reduces the amount of water entering emplacement drifts by natural subsurface processes. For example, drift seepage is limited by the capillary barrier forming at the drift crown, which decreases or even eliminates water flow from the unsaturated fractured rock into the drift. During the first few hundred years after waste emplacement, when above-boiling rock temperatures will develop as a result of heat generated by the decay of the radioactive waste, vaporization of percolation water is an additional factor limiting seepage. Estimating the effectiveness of these natural barrier capabilities and predicting the amount of seepage into drifts is an important aspect of assessing the performance of the repository. The TSPA-LA therefore includes a seepage component that calculates the amount of seepage into drifts [''Total System Performance Assessment (TSPA) Model/Analysis for the License Application'' (BSC 2004 [DIRS 168504], Section 6.3.3.1)]. The TSPA-LA calculation is performed with a probabilistic approach that accounts for the spatial and temporal variability and inherent uncertainty of seepage-relevant properties and processes. Results are used for subsequent TSPA-LA components that may handle, for example, waste package

  15. Complex transition metal hydrides incorporating ionic hydrogen: Synthesis and characterization of Na{sub 2}Mg{sub 2}FeH{sub 8} and Na{sub 2}Mg{sub 2}RuH{sub 8}

    Energy Technology Data Exchange (ETDEWEB)

    Humphries, Terry D., E-mail: terry_humphries81@hotmail.com [WPI-Advanced Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Takagi, Shigeyuki; Li, Guanqiao; Matsuo, Motoaki; Sato, Toyoto [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Sørby, Magnus H.; Deledda, Stefano; Hauback, Bjørn C. [Physics Department, Institute for Energy Technology, Kjeller NO-2027 (Norway); Orimo, Shin-ichi [WPI-Advanced Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)

    2015-10-05

    Highlights: • Structures of Na{sub 2}Mg{sub 2}FeH{sub 8} and Na{sub 2}Mg{sub 2}RuH{sub 8} have been determined by XRD and PND. • Compounds incorporate independently coordinated ionic and covalent hydrogen. • [TH{sub 6}]{sup 4−} anion is surrounded by a cubic array of four Mg{sup 2+} and four Na{sup +} cations. • H{sup −} anions are octahedrally coordinated by four Na{sup +} and two Mg{sup 2+} cations. • Vibrational modes of the H{sup −} anions and complex hydride anion are observed. - Abstract: A new class of quaternary complex transition metal hydrides (Na{sub 2}Mg{sub 2}TH{sub 8} (T = Fe, Ru)) have been synthesized and their structures determined by combined synchrotron radiation X-ray and powder neutron diffraction. The compounds can be considered as a link between ionic and complex hydrides in terms of incorporating independently coordinated ionic and covalent hydrogen. These novel isostructural complex transition metal hydrides crystallize in the orthorhombic space group Pbam, where the octahedral complex hydride anion is surrounded by a cubic array of four Mg{sup 2+} and four Na{sup +} cations, forming distinct two-dimensional layers. An intriguing feature of these materials is the distorted octahedral coordination of the isolated H{sup −} anions by four Na{sup +} and two Mg{sup 2+} cations, which form layers between the transition metal containing layers. The vibrational modes of the H{sup −} anions and complex hydride anion are independently observed for the first time in a quaternary complex transition metal hydride system by Raman and IR spectroscopy.

  16. High-Spin Cobalt Hydrides for Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Patrick L. [Univ. of Rochester, NY (United States)

    2013-08-29

    Organometallic chemists have traditionally used catalysts with strong-field ligands that give low-spin complexes. However, complexes with a weak ligand field have weaker bonds and lower barriers to geometric changes, suggesting that they may lead to more rapid catalytic reactions. Developing our understanding of high-spin complexes requires the use of a broader range of spectroscopic techniques, but has the promise of changing the mechanism and/or selectivity of known catalytic reactions. These changes may enable the more efficient utilization of chemical resources. A special advantage of cobalt and iron catalysts is that the metals are more abundant and cheaper than those currently used for major industrial processes that convert unsaturated organic molecules and biofeedstocks into useful chemicals. This project specifically evaluated the potential of high-spin cobalt complexes for small-molecule reactions for bond rearrangement and cleavage reactions relevant to hydrocarbon transformations. We have learned that many of these reactions proceed through crossing to different spin states: for example, high-spin complexes can flip one electron spin to access a lower-energy reaction pathway for beta-hydride elimination. This reaction enables new, selective olefin isomerization catalysis. The high-spin cobalt complexes also cleave the C-O bond of CO2 and the C-F bonds of fluoroarenes. In each case, the detailed mechanism of the reaction has been determined. Importantly, we have discovered that the cobalt catalysts described here give distinctive selectivities that are better than known catalysts. These selectivities come from a synergy between supporting ligand design and electronic control of the spin-state crossing in the reactions.

  17. Phase I. Lanthanum-based Start Materials for Hydride Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Gschneidner, K. A. [Ames Lab., Ames, IA (United States); Schmidt, F. A. [Ames Lab., Ames, IA (United States); Frerichs, A. E. [Ames Lab., Ames, IA (United States); Ament, K. A. [Ames Lab., Ames, IA (United States)

    2013-08-20

    The purpose of Phase I of this work is to focus on developing a La-based start material for making nickel-metal (lanthanum)-hydride batteries based on our carbothermic-silicon process. The goal is to develop a protocol for the manufacture of (La1-xRx)(Ni1-yMy)(Siz), where R is a rare earth metal and M is a non-rare earth metal, to be utilized as the negative electrode in nickel-metal hydride (NiMH) rechargeable batteries.

  18. Review of magnesium hydride-based materials: development and optimisation

    Science.gov (United States)

    Crivello, J.-C.; Dam, B.; Denys, R. V.; Dornheim, M.; Grant, D. M.; Huot, J.; Jensen, T. R.; de Jongh, P.; Latroche, M.; Milanese, C.; Milčius, D.; Walker, G. S.; Webb, C. J.; Zlotea, C.; Yartys, V. A.

    2016-02-01

    Magnesium hydride has been studied extensively for applications as a hydrogen storage material owing to the favourable cost and high gravimetric and volumetric hydrogen densities. However, its high enthalpy of decomposition necessitates high working temperatures for hydrogen desorption while the slow rates for some processes such as hydrogen diffusion through the bulk create challenges for large-scale implementation. The present paper reviews fundamentals of the Mg-H system and looks at the recent advances in the optimisation of magnesium hydride as a hydrogen storage material through the use of catalytic additives, incorporation of defects and an understanding of the rate-limiting processes during absorption and desorption.

  19. Hydride formation in core-shell alloyed metal nanoparticles

    Science.gov (United States)

    Zhdanov, Vladimir P.

    2016-07-01

    The model and analysis presented are focused on hydride formation in nanoparticles with a Pd shell and a core formed by another metal. The arrangement of metal atoms is assumed to be coherent (no dislocations). The lattice strain distribution, elastic energy, and chemical potential of hydrogen atoms are scrutinized. The slope of the chemical potential (as a function of hydrogen uptake) is demonstrated to decrease with increasing the core volume, and accordingly the critical temperature for hydride formation and the corresponding hysteresis loops are predicted to decrease as well.

  20. Hydrogen Desorption from Mg Hydride: An Ab Initio Study

    Directory of Open Access Journals (Sweden)

    Simone Giusepponi

    2012-07-01

    Full Text Available Hydrogen desorption from hydride matrix is still an open field of research. By means of accurate first-principle molecular dynamics (MD simulations an Mg–MgH2 interface is selected, studied and characterized. Electronic structure calculations are used to determine the equilibrium properties and the behavior of the surfaces in terms of structural deformations and total energy considerations. Furthermore, extensive ab-initio molecular dynamics simulations are performed at several temperatures to characterize the desorption process at the interface. The numerical model successfully reproduces the experimental desorption temperature for the hydride.

  1. Ab-initio study of transition metal hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Ramesh [Dept. of Physics, Feroze Gandhi Insititute of Engineering and Technology, Raebareli-229001 (India); Shukla, Seema, E-mail: sharma.yamini62@gmail.com; Dwivedi, Shalini, E-mail: sharma.yamini62@gmail.com; Sharma, Yamini, E-mail: sharma.yamini62@gmail.com [Theoretical Condensed Matter Physics Laboratory, Dept. of Physics Feroze Gandhi College, Raebareli-229001 (India)

    2014-04-24

    We have performed ab initio self consistent calculations based on Full potential linearized augmented plane wave (FP-LAPW) method to investigate the optical and thermal properties of yttrium hydrides. From the band structure and density of states, the optical absorption spectra and specific heats have been calculated. The band structure of Yttrium metal changes dramatically due to hybridization of Y sp orbitals with H s orbitals and there is a net charge transfer from metal to hydrogen site. The electrical resistivity and specific heats of yttrium hydrides are lowered but the thermal conductivity is slightly enhanced due to increase in scattering from hydrogen sites.

  2. Abstracts Of Some Papers

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    On the Rule of Soft law in Social Management Innovation Luo Haoeai Miao Zhijiang (P1) Abstract:With social transformation, traditional social management model based on system of units is becom- ing less effective. As a support system of social management, public law needs to response to social management in- novation. Under the guidance of the "relationship" perspective and the modern public law concept of equality, the social management model should transit from the unitary hard law governance towards composite hard/soft law gov- ernance. To promote social management innovation we should stick to the principle of people - oriented and making all consideration, on this basis, we need to initiate management philosophy of soft and interaction, carry out collaborative governance, implement self- discipline mechanism and mutual -mechanism, and to make use of all kinds of measures. Keywords:Social Management Innovation Public Law Rule of Soft Law

  3. Exploring "aerogen-hydride" interactions between ZOF2 (Z = Kr, Xe) and metal hydrides: An ab initio study

    Science.gov (United States)

    Esrafili, Mehdi D.; Mohammadian-Sabet, Fariba

    2016-06-01

    In this work, a new σ-hole interaction formed between ZOF2 (Z = Kr and Xe) as the Lewis acid and a series of metal-hydrides HMX (M = Be, Mg, Zn and X = H, F, CN, CH3) is reported. The nature of this interaction, called "aerogen-hydride" interaction, is unveiled by molecular electrostatic potential, non-covalent interaction, quantum theory of atoms in molecules and natural bond orbital analyses. Our results indicate that the aerogen-hydride interactions are quite strong and can be comparable in strength to other σ-hole bonds. An important charge-transfer interaction is also associated with the formation of OF2Z⋯HMX complexes.

  4. Uranium Hydride Nucleation and Growth Model FY'16 ESC Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Richards, Andrew Walter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Holby, Edward F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Schulze, Roland K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-20

    Uranium hydride corrosion is of great interest to the nuclear industry. Uranium reacts with water and/or hydrogen to form uranium hydride which adversely affects material performance. Hydride nucleation is influenced by thermal history, mechanical defects, oxide thickness, and chemical defects. Information has been gathered from past hydride experiments to formulate a uranium hydride model to be used in a Canned Subassembly (CSA) lifetime prediction model. This multi-scale computer modeling effort started in FY’13, and the fourth generation model is now complete. Additional high-resolution experiments will be run to further test the model.

  5. Chemical Hydride Slurry for Hydrogen Production and Storage

    Energy Technology Data Exchange (ETDEWEB)

    McClaine, Andrew W

    2008-09-30

    The purpose of this project was to investigate and evaluate the attractiveness of using a magnesium chemical hydride slurry as a hydrogen storage, delivery, and production medium for automobiles. To fully evaluate the potential for magnesium hydride slurry to act as a carrier of hydrogen, potential slurry compositions, potential hydrogen release techniques, and the processes (and their costs) that will be used to recycle the byproducts back to a high hydrogen content slurry were evaluated. A 75% MgH2 slurry was demonstrated, which was just short of the 76% goal. This slurry is pumpable and storable for months at a time at room temperature and pressure conditions and it has the consistency of paint. Two techniques were demonstrated for reacting the slurry with water to release hydrogen. The first technique was a continuous mixing process that was tested for several hours at a time and demonstrated operation without external heat addition. Further work will be required to reduce this design to a reliable, robust system. The second technique was a semi-continuous process. It was demonstrated on a 2 kWh scale. This system operated continuously and reliably for hours at a time, including starts and stops. This process could be readily reduced to practice for commercial applications. The processes and costs associated with recycling the byproducts of the water/slurry reaction were also evaluated. This included recovering and recycling the oils of the slurry, reforming the magnesium hydroxide and magnesium oxide byproduct to magnesium metal, hydriding the magnesium metal with hydrogen to form magnesium hydride, and preparing the slurry. We found that the SOM process, under development by Boston University, offers the lowest cost alternative for producing and recycling the slurry. Using the H2A framework, a total cost of production, delivery, and distribution of $4.50/kg of hydrogen delivered or $4.50/gge was determined. Experiments performed at Boston

  6. The influence of hydride on fracture toughness of recrystallized Zircaloy-4 cladding

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Hsiao-Hung, E-mail: 175877@mail.csc.com.tw [Institute of Nuclear Energy Research (INER), Lungtan Township, Taoyuan County 32546, Taiwan, ROC (China); China Steel Corporation, Hsiao Kang District, Kaohsiung 81233, Taiwan, ROC (China); Chiang, Ming-Feng [China Steel Corporation, Hsiao Kang District, Kaohsiung 81233, Taiwan, ROC (China); Chen, Yen-Chen [Institute of Nuclear Energy Research (INER), Lungtan Township, Taoyuan County 32546, Taiwan, ROC (China)

    2014-04-01

    In this work, RXA cladding tubes were hydrogen-charged to target hydrogen content levels between 150 and 800 wppm (part per million by weight). The strings of zirconium hydrides observed in the cross sections are mostly oriented in the circumferential direction. The fracture toughness of hydrided RXA Zircaloy-4 cladding was measured to evaluate its hydride embrittlement susceptibility. With increasing hydrogen content, the fracture toughness of hydrided RXA cladding decreases at both 25 °C and 300 °C. Moreover, highly localized hydrides (forming a hydride rim) aggravate the degradation of the fracture properties of RXA Zircaloy-4 cladding at both 25 °C and 300 °C. Brittle features in the form of quasi-cleavages and secondary cracks were observed on the fracture surface of the hydride rim, even for RXA cladding tested at 300 °C.

  7. Using abstract language signals power.

    Science.gov (United States)

    Wakslak, Cheryl J; Smith, Pamela K; Han, Albert

    2014-07-01

    Power can be gained through appearances: People who exhibit behavioral signals of power are often treated in a way that allows them to actually achieve such power (Ridgeway, Berger, & Smith, 1985; Smith & Galinsky, 2010). In the current article, we examine power signals within interpersonal communication, exploring whether use of concrete versus abstract language is seen as a signal of power. Because power activates abstraction (e.g., Smith & Trope, 2006), perceivers may expect higher power individuals to speak more abstractly and therefore will infer that speakers who use more abstract language have a higher degree of power. Across a variety of contexts and conversational subjects in 7 experiments, participants perceived respondents as more powerful when they used more abstract language (vs. more concrete language). Abstract language use appears to affect perceived power because it seems to reflect both a willingness to judge and a general style of abstract thinking.

  8. Hydrogen storage properties of Mg-Ni-Fe composites prepared by hydriding combustion synthesis and mechanical milling

    Energy Technology Data Exchange (ETDEWEB)

    Zhu Yunfeng, E-mail: yfzhu@njut.edu.cn [College of Materials Science and Engineering, Nanjing University of Technology, Nanjing 210009 (China); Yang Yang; Wei Lingjun; Zhao Zelun; Li Liquan [College of Materials Science and Engineering, Nanjing University of Technology, Nanjing 210009 (China)

    2012-04-15

    Highlights: Black-Right-Pointing-Pointer Mg-Ni-Fe composite was prepared by the process of HCS + MM. Black-Right-Pointing-Pointer Fe is favorable to grain and particle refinement of the composite. Black-Right-Pointing-Pointer Mg-Ni-Fe composite exhibits superior hydrogen storage properties. Black-Right-Pointing-Pointer Mg{sub 2}Ni and Fe have synergistic catalysis on hydrogen storage properties. - Abstract: We reported the structures and superior hydrogen storage properties of the composites Mg{sub 90}Ni{sub 10-x}Fe{sub x} (x = 0, 2, 4, 6 and 8) prepared by the process of HCS + MM, i.e., the hydriding combustion synthesis followed by mechanical milling. By means of X-ray diffraction (XRD), scanning electron microscopy (SEM) with an energy dispersive X-ray spectrometer (EDX) and gas reaction controller (GRC), the crystal structures, surface morphologies and hydriding/dehydriding properties of the composites were studied in detail. The Mg{sub 90}Ni{sub 10-x}Fe{sub x} (x = 2, 4, 6 and 8) composites consist of MgH{sub 2}, Mg, Mg{sub 2}NiH{sub 4}, Mg{sub 2}NiH{sub 0.3} and Fe phases, while Mg{sub 90}Ni{sub 10} is composed of MgH{sub 2}, Mg, Mg{sub 2}NiH{sub 4} and Mg{sub 2}NiH{sub 0.3}. It is found that Mg{sub 90}Ni{sub 2}Fe{sub 8} has the best hydriding properties, requiring only 30 s to absorb 97% of its saturated hydrogen capacity of 4.80 wt.% at 373 K. The best dehydriding result is obtained with Mg{sub 90}Ni{sub 8}Fe{sub 2}, which desorbs 2.02 and 4.40 wt.% hydrogen at 493 and 523 K, respectively. The microstructures of the composites prepared by HCS + MM have remarkable influences on the enhanced hydriding/dehydriding properties. In addition, the catalytic effects of Mg{sub 2}Ni and Fe phases during hydriding/dehydriding were discussed in this study.

  9. A Novel Zr-1Nb Alloy and a New Look at Hydriding

    Energy Technology Data Exchange (ETDEWEB)

    Robert D. Mariani; James I. Cole; Assel Aitkaliyeva

    2013-09-01

    A novel Zr-1Nb has begun development based on a working model that takes into account the hydrogen permeabilities for zirconium and niobium metals. The beta-Nb secondary phase particles (SPPs) in Zr-1Nb are believed to promote more rapid hydrogen dynamics in the alloy in comparison to other zirconium alloys. Furthermore, some hydrogen release is expected at the lower temperatures corresponding to outages when the partial pressure of H2 in the coolant is less. These characteristics lessen the negative synergism between corrosion and hydriding that is otherwise observed in cladding alloys without niobium. In accord with the working model, development of nanoscale precursors was initiated to enhance the performance of existing Zr-1Nb alloys. Their characteristics and properties can be compared to oxide-dispersion strengthened alloys, and material additions have been proposed to zirconium-based LWR cladding to guard further against hydriding and to fix the size of the SPPs for microstructure stability enhancements. A preparative route is being investigated that does not require mechanical alloying, and 10 nanometer molybdenum particles have been prepared which are part of the nanoscale precursors. If successful, the approach has implications for long term dry storage of used fuel and for new routes to nanoferritic and ODS alloys.

  10. Direct Conversion of Hydride- to Siloxane-Terminated Silicon Quantum Dots

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Ryan T.; Zang, Xiaoning; Fernando, Roshan; Dzara, Michael J.; Ngo, Chilan; Sharps, Meredith; Pinals, Rebecca; Pylypenko, Svitlana; Lusk, Mark T.; Sellinger, Alan

    2016-11-17

    Peripheral surface functionalization of hydride-terminated silicon quantum dots (SiQD) is necessary in order to minimize their oxidation/aggregation and allow for solution processability. Historically thermal hydrosilylation addition of alkenes and alkynes across the Si-H surface to form Si-C bonds has been the primary method to achieve this. Here we demonstrate a mild alternative approach to functionalize hydride-terminated SiQDs using bulky silanols in the presence of free-radical initiators to form stable siloxane (~Si-O-SiR3) surfaces with hydrogen gas as a byproduct. This offers an alternative to existing methods of forming siloxane surfaces that require corrosive Si-Cl based chemistry with HCl byproducts. A 52 nm blue shift in the photoluminescent spectra of siloxane versus alkyl-functionalized SiQDs is observed that we explain using computational theory. Model compound synthesis of silane and silsesquioxane analogues is used to optimize surface chemistry and elucidate reaction mechanisms. Thorough characterization on the extent of siloxane surface coverage is provided using FTIR and XPS. TEM is used to demonstrate SiQD size and integrity after surface chemistry and product isolation.

  11. Hydride transfer made easy in the oxidation of alcohols catalyzed by choline oxidase

    Energy Technology Data Exchange (ETDEWEB)

    Gadda, G.; Orville, A.; Pennati, A.; Francis, K.; Quaye, O.; Yuan, H.; Rungsrisuriyachai, K.; Finnegan, S.; Mijatovic, S.; Nguyen, T.

    2008-06-08

    Choline oxidase (E.C. 1.1.3.17) catalyzes the two-step, four-electron oxidation of choline to glycine betaine with betaine aldehyde as enzyme-associated intermediate and molecular oxygen as final electron acceptor (Scheme 1). The gem-diol, hydrated species of the aldehyde intermediate of the reaction acts as substrate for aldehyde oxidation, suggesting that the enzyme may use similar strategies for the oxidation of the alcohol substrate and aldehyde intermediate. The determination of the chemical mechanism for alcohol oxidation has emerged from biochemical, mechanistic, mutagenetic, and structural studies. As illustrated in the mechanism of Scheme 2, the alcohol substrate is initially activated in the active site of the enzyme by removal of the hydroxyl proton. The resulting alkoxide intermediate is then stabilized in the enzyme-substrate complex via electrostatic interactions with active site amino acid residues. Alcohol oxidation then occurs quantum mechanically via the transfer of the hydride ion from the activated substrate to the N(5) flavin locus. An essential requisite for this mechanism of alcohol oxidation is the high degree of preorganization of the activated enzyme-substrate complex, which is achieved through an internal equilibrium of the Michaelis complex occurring prior to, and independently from, the subsequent hydride transfer reaction. The experimental evidence that support the mechanism for alcohol oxidation shown in Scheme 2 is briefly summarized in the Results and Discussion section.

  12. Hydrogen Storage in Porous Materials and Magnesium Hydrides

    NARCIS (Netherlands)

    Grzech, A.

    2013-01-01

    In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen

  13. Pore confined synthesis of magnesium boron hydride nanoparticles

    NARCIS (Netherlands)

    Au, Yuen S.; Yan, Yigang; De Jong, Krijn P.; Remhof, Arndt; De Jongh, Petra E.

    2014-01-01

    Nanostructured materials based on light elements such as Li, Mg, and Na are essential for energy storage and conversion applications, but often difficult to prepare with control over size and structure. We report a new strategy that is illustrated for the formation of magnesium boron hydrides,

  14. Novel baker's yeast catalysed hydride reduction of an epoxide moiety

    CSIR Research Space (South Africa)

    Horak, RM

    1995-02-27

    Full Text Available -4039(95)00043-7 Tetrahedron Letters, Vol. 36, No. 9, pp. 1541-1544, 1995 Elsevier Science Ltd Printed in Great Britain 0040-4039/95 $9.50+0.00 A Novel Baker's Yeast Catalysed Hydride Reduction of an Epoxide Moiety R. Marthinus Horak, Robin A...

  15. Hydrogen Storage in Porous Materials and Magnesium Hydrides

    NARCIS (Netherlands)

    Grzech, A.

    2013-01-01

    In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen stora

  16. Review of magnesium hydride-based materials: development and optimisation

    NARCIS (Netherlands)

    Crivello, J. -C.; Dam, B.; Denys, R. V.; Dornheim, M.; Grant, D. M.; Huot, J.; Jensen, T. R.; de Jongh, P.; Latroche, M.; Milanese, C.; Milcius, D.; Walker, G. S.; Webb, C. J.; Zlotea, C.; Yartys, V. A.

    2016-01-01

    Magnesium hydride has been studied extensively for applications as a hydrogen storage material owing to the favourable cost and high gravimetric and volumetric hydrogen densities. However, its high enthalpy of decomposition necessitates high working temperatures for hydrogen desorption while the slo

  17. Process of forming a sol-gel/metal hydride composite

    Science.gov (United States)

    Congdon, James W.

    2009-03-17

    An external gelation process is described which produces granules of metal hydride particles contained within a sol-gel matrix. The resulting granules are dimensionally stable and are useful for applications such as hydrogen separation and hydrogen purification. An additional coating technique for strengthening the granules is also provided.

  18. Hydrogen adsorption on palladium and palladium hydride at 1 bar

    DEFF Research Database (Denmark)

    Johansson, Martin; Skulason, Egill; Nielsen, Gunver

    2010-01-01

    The dissociative sticking probability for H-2 on Pd films supported on sputtered Highly Ordered Pyrolytic Graphite (HOPG) has been derived from measurements of the rate of the H-D exchange reaction at 1 bar. The sticking probability for H-2, S. is higher on Pd hydride than on Pd (a factor of 1...

  19. Pore confined synthesis of magnesium boron hydride nanoparticles

    NARCIS (Netherlands)

    Au, Yuen S.; Yan, Yigang; De Jong, Krijn P.; Remhof, Arndt; De Jongh, Petra E.

    2014-01-01

    Nanostructured materials based on light elements such as Li, Mg, and Na are essential for energy storage and conversion applications, but often difficult to prepare with control over size and structure. We report a new strategy that is illustrated for the formation of magnesium boron hydrides, relev

  20. Optimization of Internal Cooling Fins for Metal Hydride Reactors

    Directory of Open Access Journals (Sweden)

    Vamsi Krishna Kukkapalli

    2016-06-01

    Full Text Available Metal hydride alloys are considered as a promising alternative to conventional hydrogen storage cylinders and mechanical hydrogen compressors. Compared to storing in a classic gas tank, metal hydride alloys can store hydrogen at nearly room pressure and use less volume to store the same amount of hydrogen. However, this hydrogen storage method necessitates an effective way to reject the heat released from the exothermic hydriding reaction. In this paper, a finned conductive insert is adopted to improve the heat transfer in the cylindrical reactor. The fins collect the heat that is volumetrically generated in LaNi5 metal hydride alloys and deliver it to the channel located in the center, through which a refrigerant flows. A multiple-physics modeling is performed to analyze the transient heat and mass transfer during the hydrogen absorption process. Fin design is made to identify the optimum shape of the finned insert for the best heat rejection. For the shape optimization, use of a predefined transient heat generation function is proposed. Simulations show that there exists an optimal length for the fin geometry.

  1. Superconductivity and unexpected chemistry of germanium hydrides under pressure

    Science.gov (United States)

    Davari Esfahani, M. Mahdi; Oganov, Artem R.; Niu, Haiyang; Zhang, Jin

    2017-04-01

    Following the idea that hydrogen-rich compounds might be high-Tc superconductors at high pressures, and the very recent breakthrough in predicting and synthesizing hydrogen sulfide with record-high Tc=203 K , an ab initio evolutionary algorithm for crystal structure prediction was employed to find stable germanium hydrides. In addition to the earlier structure of germane with space group Ama2, we propose a C2/m structure, which is energetically more favorable at pressures above 278 GPa (with inclusion of zero-point energy). Our calculations indicate that the C2/m phase of germane is a superconductor with Tc=67 K at 280 GPa. Germane is found to become thermodynamically unstable to decomposition to hydrogen and the compound Ge3H11 at pressures above 300 GPa. Ge3H11 with space group I 4 ¯m 2 is found to become stable at above 285 GPa with Tc=43 K . We find that the pressure-induced phase stability of germanium hydrides is distinct from analogous isoelectronic systems, e.g., Si hydrides and Sn hydrides. Superconductivity stems from large electron-phonon coupling associated with the wagging, bending, and stretching intermediate-frequency modes derived mainly from hydrogen.

  2. Structural stability of complex hydrides LiBH4 revisited

    DEFF Research Database (Denmark)

    Lodziana, Zbigniew; Vegge, Tejs

    2004-01-01

    A systematic approach to study the phase stability of LiBH4 based on ab initio calculations is presented. Three thermodynamically stable phases are identified and a new phase of Cc symmetry is proposed for the first time for a complex hydride. The x-ray diffraction pattern and vibrational spectra...

  3. Optimizing Misch-Metal Compositions In Metal Hydride Anodes

    Science.gov (United States)

    Bugga, Ratnakumar V.; Halpert, Gerald

    1995-01-01

    Electrochemical cells based on metal hydride anodes investigated experimentally in effort to find anode compositions maximizing charge/discharge-cycle performances. Experimental anodes contained misch metal alloyed with various proportions of Ni, Co, Mn, and Al, and experiments directed toward optimization of composition of misch metal.

  4. Well-defined transition metal hydrides in catalytic isomerizations.

    Science.gov (United States)

    Larionov, Evgeny; Li, Houhua; Mazet, Clément

    2014-09-07

    This Feature Article intends to provide an overview of a variety of catalytic isomerization reactions that have been performed using well-defined transition metal hydride precatalysts. A particular emphasis is placed on the underlying mechanistic features of the transformations discussed. These have been categorized depending upon the nature of the substrate and in most cases discussed following a chronological order.

  5. Nanocrystalline Metal Hydrides Obtained by Severe Plastic Deformations

    Directory of Open Access Journals (Sweden)

    Jacques Huot

    2012-01-01

    Full Text Available It has recently been shown that Severe Plastic Deformation (SPD techniques could be used to obtain nanostructured metal hydrides with enhanced hydrogen sorption properties. In this paper we review the different SPD techniques used on metal hydrides and present some specific cases of the effect of cold rolling on the hydrogen storage properties and crystal structure of various types of metal hydrides such as magnesium-based alloys and body centered cubic (BCC alloys. Results show that generally cold rolling is as effective as ball milling to enhance hydrogen sorption kinetics. However, for some alloys such as TiV0.9Mn1.1 alloy ball milling and cold rolling have detrimental effect on hydrogen capacity. The exact mechanism responsible for the change in hydrogenation properties may not be the same for ball milling and cold rolling. Nevertheless, particle size reduction and texture seems to play a leading role in the hydrogen sorption enhancement of cold rolled metal hydrides.

  6. Metal hydrides for smart window and sensor applications

    NARCIS (Netherlands)

    Yoshimura, K.; Langhammer, C.; Dam, B.

    2013-01-01

    The hydrogenation of metals often leads to changes in optical properties in the visible range. This allows for fundamental studies of the hydrogenation process, as well as the exploration of various applications using these optical effects. Here, we focus on recent developments in metal hydride-base

  7. Tribochemical Decomposition of Light Ionic Hydrides at Room Temperature.

    Science.gov (United States)

    Nevshupa, Roman; Ares, Jose Ramón; Fernández, Jose Francisco; Del Campo, Adolfo; Roman, Elisa

    2015-07-16

    Tribochemical decomposition of magnesium hydride (MgH2) induced by deformation at room temperature was studied on a micrometric scale, in situ and in real time. During deformation, a near-full depletion of hydrogen in the micrometric affected zone is observed through an instantaneous (t MgH2 with reduced crystal size by mechanical deformation.

  8. KNH2-KH: a metal amide-hydride solid solution.

    Science.gov (United States)

    Santoru, Antonio; Pistidda, Claudio; Sørby, Magnus H; Chierotti, Michele R; Garroni, Sebastiano; Pinatel, Eugenio; Karimi, Fahim; Cao, Hujun; Bergemann, Nils; Le, Thi T; Puszkiel, Julián; Gobetto, Roberto; Baricco, Marcello; Hauback, Bjørn C; Klassen, Thomas; Dornheim, Martin

    2016-09-27

    We report for the first time the formation of a metal amide-hydride solid solution. The dissolution of KH into KNH2 leads to an anionic substitution, which decreases the interaction among NH2(-) ions. The rotational properties of the high temperature polymorphs of KNH2 are thereby retained down to room temperature.

  9. Thin-film metal hydrides for solar energy applications

    Energy Technology Data Exchange (ETDEWEB)

    Mongstad, Trygve Tveiteraas

    2012-11-01

    Thin-film metal hydrides may become important solar energy materials in the future. This thesis demonstrates interesting material properties of metal hydride films, relevant for applications as semiconducting materials for photovoltaic (PV) solar cells and for regulation of light using smart window technology.The work presented here has comprised an experimental study, focusing on three different materials: Magnesium hydride (MgH2), magnesium nickel hydride (Mg2NiH4) and yttrium hydride (YHx). Reactive sputter deposition was used to prepare the metal hydride film samples.This synthesis method is relatively uncommon for metal hydrides. Here,the first demonstration of reactive sputtering synthesis for YHx and Mg2NiH4 is given. Different challenges in forming singlephase, pure metal hydrides were identified: MgH2 could not be deposited without 3-16% metallic Mg present in the films, and YHx was found to react strong-ly to oxygen (O) during the deposition process. On the other hand, Mg2NiH4 films formed easily and apparently without major metallic clusters and with low O content.Mg2NiH4 is a semiconductor with an optical band gap that is suitable for PV solar cells. This study has showed that films with promising electrical and optical properties can be synthesized using reactive cosputtering of Mg and Ni. Using optical methods, the band gap for the as deposited samples was estimated to 1.54-1.76 eV, depending on the Mg-Ni composition. The asdeposited films were amorphous or nano-crystalline, but could be crystallized into the high-temperature fcc structure of Mg2NiH4 using heat treatment at 523 K. The band gap of the crystalline films was 2.1-2.2 eV, depending on the composition.A pronounced photochromic reaction to visible and UV light was observed for transparent yttrium hydride (T-YHx) samples. The optical transmission was reduced when the samples were illuminated, and the original optical transmission was restored when the samples were kept under dark conditions

  10. Activation and discharge kinetics of metal hydride electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, Stein Egil

    2003-07-01

    Potential step chronoamperometry and Electrochemical Impedance Spectroscopy (eis) measurements were performed on single metal hydride particles. For the {alpha}-phase, the bulk diffusion coefficient and the absorption/adsorption rate parameters were determined. Materials produced by atomisation, melt spinning and conventional casting were investigated. The melt spun and conventional cast materials were identical and the atomised material similar in composition. The particles from the cast and the melt spun material were shaped like parallelepipeds. A corresponding equation, for this geometry, for diffusion coupled to an absorption/adsorption reaction was developed. It was found that materials produced by melt spinning exhibited lower bulk diffusion (1.7E-14 m2/s) and absorption/adsorption reaction rate (1.0E-8 m/s), compared to materials produced by conventionally casting (1.1E-13 m2/s and 5.5E-8 m/s respectively). In addition, the influence of particle active surface and relative diffusion length were discussed. It was concluded that there are uncertainties connected to these properties, which may explain the large distribution in the kinetic parameters measured on metal hydride particles. Activation of metal hydride forming materials has been studied and an activation procedure, for porous electrodes, was investigated. Cathodic polarisation of the electrode during a hot alkaline surface treatment gave the maximum discharge capacity on the first discharge of the electrode. The studied materials were produced by gas atomisation and the spherical shape was retained during the activation. Both an AB{sub 5} and an AB{sub 2} alloy was successfully activated and discharge rate properties determined. The AB{sub 2} material showed a higher maximum discharge capacity, but poor rate properties, compared to the AB{sub 5} material. Reduction of surface oxides, and at the same time protection against corrosion of active metallic nickel, can explain the satisfying results of

  11. Metal Hydrides as hot carrier cell absorber materials

    Science.gov (United States)

    Wang, Pei; Wen, Xiaoming; Shrestha, Santosh; Conibeer, Gavin; Aguey-Zinsou, Kondo-Francois

    2016-09-01

    The hot Carrier Solar Cell (HCSC) allows the photon-induced hot carriers (the carriers with energy larger than the band gap) to be collected before they completely thermalise. The absorber of the HCSC should have a large phononic band gap to supress Klemens Decay, which results in a slow carrier cooling speed. In fact, a large phononic band gap likely exists in a binary compound whose constituent elements have a large mass ratio between each other. Binary hydrides with their overwhelming mass ratio of the constituent elements are important absorber candidates. Study on different types of binary hydrides as potential absorber candidates is presented in this paper. Many binary transition metal hydrides have reported theoretical or experimental phonon dispersion charts which show large phononic band gaps. Among these hydrides, the titanium hydride (TiHX) is outstanding because of its low cost, easy fabrication process and is relatively inert to air and water. A TiHX thin film is fabricated by directly hydrogenating an evaporated titanium thin film. Characterisation shows good crystal quality and the hydrogenation process is believed to be successful. Ultrafast transient absorption (TA) spectroscopy is used to study the electron cooling time of TiHX. The result is very noisy due to the low absorption and transmission of the sample. The evolution of the TA curves has been explained by band to band transition using the calculated band structure of TiH2. Though not reliable due to the high noise, decay time fitting at 700nm and 600nm shows a considerably slow carrier cooling speed of the sample.

  12. Modal abstractions of concurrent behavior

    DEFF Research Database (Denmark)

    Nielson, Flemming; Nanz, Sebastian; Nielson, Hanne Riis

    2011-01-01

    We present an effective algorithm for the automatic construction of finite modal transition systems as abstractions of potentially infinite concurrent processes. Modal transition systems are recognized as valuable abstractions for model checking because they allow for the validation as well...... as refutation of safety and liveness properties. However, the algorithmic construction of finite abstractions from potentially infinite concurrent processes is a missing link that prevents their more widespread usage for model checking of concurrent systems. Our algorithm is a worklist algorithm using concepts...

  13. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Denney, R.M. (ed.)

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  14. Effect of amorphous Mg{sub 50}Ni{sub 50} on hydriding and dehydriding behavior of Mg{sub 2}Ni alloy

    Energy Technology Data Exchange (ETDEWEB)

    Guzman, D., E-mail: danny.guzman@uda.cl [Departamento de Ingenieria en Metalurgia, Facultad de Ingenieria, Universidad de Atacama y Centro Regional de Investigacion y Desarrollo Sustentable de Atacama (CRIDESAT), Av. Copayapu 485, Copiapo (Chile); Ordonez, S. [Departamento de Ingenieria Metalurgica, Facultad de Ingenieria, Universidad de Santiago de Chile, Av. Lib. Bernardo O' Higgins 3363, Santiago (Chile); Fernandez, J.F.; Sanchez, C. [Departamento de Fisica de Materiales, Facultad de Ciencias, Universidad Autonoma de Madrid, Cantoblanco 28049, Madrid (Spain); Serafini, D. [Departamento de Fisica, Facultad de Ciencias, Universidad de Santiago de Chile and Center for Interdisciplinary Research in Materials, CIMAT, Av. Lib. Bernardo O' Higgins 3363, Santiago (Chile); Rojas, P.A. [Escuela de Ingenieria Mecanica, Facultad de Ingenieria, Av. Los Carrera 01567, Quilpue, Pontificia Universidad Catolica de Valparaiso, PUCV (Chile); Aguilar, C. [Departamento de Ingenieria Metalurgica y Materiales, Universidad Tecnica Federico Santa Maria, Av. Espana 1680, Valparaiso (Chile); Tapia, P. [Departamento de Ingenieria en Metalurgia, Facultad de Ingenieria, Universidad de Atacama, Av. Copayapu 485, Copiapo (Chile)

    2011-04-15

    Composite Mg{sub 2}Ni (25 wt.%) amorphous Mg{sub 50}Ni{sub 50} was prepared by mechanical milling starting with nanocrystalline Mg{sub 2}Ni and amorphous Mg{sub 50}Ni{sub 50} powders, by using a SPEX 8000 D mill. The morphological and microstructural characterization of the powders was performed via scanning electron microscopy and X-ray diffraction. The hydriding characterization of the composite was performed via a solid gas reaction method in a Sievert's-type apparatus at 363 K under an initial hydrogen pressure of 2 MPa. The dehydriding behavior was studied by differential thermogravimetry. On the basis of the results, it is possible to conclude that amorphous Mg{sub 50}Ni{sub 50} improved the hydriding and dehydriding kinetics of Mg{sub 2}Ni alloy upon cycling. A tentative rationalization of experimental observations is proposed. - Research Highlights: {yields} First study of the hydriding behavior of composite Mg{sub 2}Ni (25 wt.%) amorphous Mg{sub 50}Ni{sub 50}. {yields} Microstructural characterization of composite material using XRD and SEM was obtained. {yields} An improved effect of Mg{sub 50}Ni{sub 50} on the Mg{sub 2}Ni hydriding behavior was verified. {yields} The apparent activation energy for the hydrogen desorption of composite was obtained.

  15. Hedonism in Abstract Art: Minimalist digital abstract photography

    Directory of Open Access Journals (Sweden)

    Srdjan Jovanović

    2009-06-01

    Full Text Available In this piece of writing the writer/artist puts forward the view that art can be understood and taken in as sometimes purely hedonistic. By drawing upon the theories pertaining to hedonism, he applies this view to minimalist digital abstract photography and tries to justify his point of view with the help of three abstract photographs.

  16. Hydride structures in Ti-aluminides subjected to high temperature and hydrogen pressure charging conditions

    Science.gov (United States)

    Legzdina, D.; Robertson, I. M.; Birnbaum, H. K.

    1991-01-01

    The distribution and chemistry of hydrides produced in single and dual phase alloys with a composition near TiAl have been investigated by using a combination of TEM and X-ray diffraction techniques. The alloys were exposed at 650 C to 13.8 MPa of gaseous H2 for 100 h. In the single-phase gamma alloy, large hydrides preferentially nucleated on the grain boundaries and matrix dislocations and a population of small hydrides was distributed throughout the matrix. X-ray and electron diffraction patterns from these hydrides indicated that they have an fcc structure with a lattice parameter of 0.45 nm. EDAX analysis of the hydrides showed that they were enriched in Ti. The hydrides were mostly removed by vacuum annealing at 800 C for 24 h. On dissolution of the hydrides, the chemistry of hydride-free regions of the grain boundary returned to the matrix composition, suggesting that Ti segregation accompanied the hydride formation rather than Ti enrichment causing the formation of the hydride.

  17. Hydriding performances and modeling of a small-scale ZrCo bed

    Energy Technology Data Exchange (ETDEWEB)

    Koo, D.; Lee, J.; Park, J.; Paek, S.; Chung, H. [KAERI-UST, Yuseong, Daejeon (Korea, Republic of); Chang, M.H.; Yun, S.H.; Cho, S.; Jung, K.J. [NFRI, Yuseong, Daejeon (Korea, Republic of)

    2015-03-15

    In order to evaluate the performance of the hydriding of a ZrCo bed, a small-scale getter bed of ZrCo was designed and fabricated. The results show that the hydriding time at room temperature was somewhat shorter than that at higher temperatures of ZrCo and that the performance of hydriding at low temperatures of ZrCo was better than that at high temperatures of ZrCo. The experimental results of the hydrogen pressure of hydriding (ZrCoH{sub 2.8}) at different temperatures were in agreement with the computed values using a numerical modeling equation but with a small difference during the first 10 minutes of the hydriding of ZrCo. The model is based on the Kozeny-Carman equation. The effect of a helium blanket on hydriding was measured and analyzed. The hydriding with no helium blanket in the primary vessel of ZrCo is much faster than that with a helium blanket. The hydriding at a helium concentration of 8% is slower than that at 0%. As the helium concentration increases, the hydriding of ZrCo decreases. The experimental results of the hydriding with 0 %, 4%, and 8% of helium concentration are in agreement with the calculated values but with minimal differences during the first 10 minutes.

  18. Poster Abstract: Towards NILM for Industrial Settings

    DEFF Research Database (Denmark)

    Holmegaard, Emil; Kjærgaard, Mikkel Baun

    2015-01-01

    Industry consumes a large share of the worldwide electricity consumption. Disaggregated information about electricity consumption enables better decision-making and feedback tools to optimize electricity consumption. In industrial settings electricity loads consist of a variety of equipment, which...... consumption for six months, at an industrial site. In this poster abstract we provide initial results for how industrial equipment challenge NILM algorithms. These results thereby open up for evaluating the use of NILM in industrial settings....

  19. Dissociation potential curves of low-lying states in transition metal hydrides. 3. Hydrides of groups 6 and 7.

    Science.gov (United States)

    Koseki, Shiro; Matsushita, Takeshi; Gordon, Mark S

    2006-02-23

    The dissociation curves of low-lying spin-mixed states in monohydrides of groups 6 and 7 were calculated by using an effective core potential (ECP) approach. This approach is based on the multiconfiguration self-consistent field (MCSCF) method, followed by first-order configuration interaction (FOCI) calculations, in which the method employs an ECP basis set proposed by Stevens and co-workers (SBKJC) augmented by a set of polarization functions. Spin-orbit coupling (SOC) effects are estimated within the one-electron approximation by using effective nuclear charges, since SOC splittings obtained with the full Breit-Pauli Hamitonian are underestimated when ECP basis sets are used. The ground states of group 6 hydrides have Omega = (1)/(2)(X(6)Sigma(+)(1/2)), where Omega is the z component of the total angular momentum quantum number. Although the ground states of group 7 hydrides have Omega = 0(+), their main adiabatic components are different; the ground state in MnH originates from the lowest (7)Sigma(+), while in TcH and ReH the main component of the ground state is the lowest (5)Sigma(+). The present paper reports a comprehensive set of theoretical results including the dissociation energies, equilibrium distances, electronic transition energies, harmonic frequencies, anharmonicities, and rotational constants for several low-lying spin-mixed states in these hydrides. Transition dipole moments were also computed among the spin-mixed states and large peak positions of electronic transitions are suggested theoretically for these hydrides. The periodic trends of physical properties of metal hydrides are discussed, based on the results reported in this and other recent studies.

  20. Heavy hydrides: H2Te ultraviolet photochemistry

    Science.gov (United States)

    Underwood, J.; Chastaing, D.; Lee, S.; Wittig, C.

    2005-08-01

    The room-temperature ultraviolet absorption spectrum of H2Te has been recorded. Unlike other group-6 hydrides, it displays a long-wavelength tail that extends to 400 nm. Dissociation dynamics have been examined at photolysis wavelengths of 266 nm (which lies in the main absorption feature) and 355 nm (which lies in the long-wavelength tail) by using high-n Rydberg time-of-flight spectroscopy to obtain center-of-mass translational energy distributions for the channels that yield H atoms. Photodissociation at 355 nm yields TeH(Π1/22) selectively relative to the TeH(Π3/22) ground state. This is attributed to the role of the 3A' state, which has a shallow well at large RH-TeH and correlates to H +TeH(Π1/22). Note that the Π1/22 state is analogous to the P1/22 spin-orbit excited state of atomic iodine, which is isoelectronic with TeH. The 3A' state is crossed at large R only by 2A″, with which it does not interact. The character of 3A' at large R is influenced by a strong spin-orbit interaction in the TeH product. Namely, Π1/22 has a higher degree of spherical symmetry than does Π3/22 (recall that I(P1/22) is spherically symmetric), and consequently Π1/22 is not inclined to form either strongly bonding or antibonding orbitals with the H atom. The 3A'←X transition dipole moment dominates in the long-wavelength region and increases with R. Structure observed in the absorption spectrum in the 380-400 nm region is attributed to vibrations on 3A'. The main absorption feature that is peaked at ˜240nm might arise from several excited surfaces. On the basis of the high degree of laboratory system spatial anisotropy of the fragments from 266 nm photolysis, as well as high-level theoretical studies, the main contribution is believed to be due to the 4A″ surface. The 4A″←X transition dipole moment dominates in the Franck-Condon region, and its polarization is in accord with the experimental observations. An extensive secondary photolysis (i.e., of nascent TeH) is

  1. Ti–V–Mn based metal hydrides for hydrogen compression applications

    Energy Technology Data Exchange (ETDEWEB)

    Pickering, Lydia, E-mail: lydia.pickering@btinternet.com; Reed, Daniel; Bevan, Alexander I.; Book, David, E-mail: d.book@bham.ac.uk

    2015-10-05

    Highlights: • Ti–V–Mn based alloys were investigated as V was substituted for Nb, Cr, Mo and Ta. • The produced alloys were found to possess C14 Laves, BCC and FCC phases. • <0.2 Nb substituted for V led to small hysteresis and high dissociation pressures. • Ti{sub 0.5}–V{sub 0.45}–Nb{sub 0.05}–Mn is a suitable alloy to be used in a metal hydride compressor. - Abstract: Ti–V–Mn based alloys, consisting mainly of the hexagonal C14 Laves and BCC phases, with nominal compositions of Ti{sub 0.5}V{sub 0.4}TM{sub 0.1}Mn, where TM = Nb, Cr, Mo, Ta and Ti{sub 0.5}V{sub 0.5−x}Nb{sub x}Mn, where x = 0.05 and 0.2, were synthesised by arc melting. It was found that small amounts of Nb substituted for V (x = 0.05 and 0.1) resulted in smaller hysteresis between absorption and desorption as well as higher hydrogen dissociation pressures, compared to Ti{sub 0.5}V{sub 0.5}Mn. These findings show that Ti{sub 0.5}–V{sub 0.45}–Nb{sub 0.05}–Mn is a suitable alloy to be used in a metal hydride compressor to deliver a pressure of 650 bar in the temperature range 303–473 K.

  2. Abstract concepts in grounded cognition

    NARCIS (Netherlands)

    Lakens, D.

    2010-01-01

    When people think about highly abstract concepts, they draw upon concrete experiences to structure their thoughts. For example, black knights in fairytales are evil, and knights in shining armor are good. The sensory experiences black and white are used to represent the abstract concepts of good and

  3. Modal abstractions of concurrent behavior

    DEFF Research Database (Denmark)

    Nielson, Flemming; Nanz, Sebastian; Nielson, Hanne Riis

    2011-01-01

    We present an effective algorithm for the automatic construction of finite modal transition systems as abstractions of potentially infinite concurrent processes. Modal transition systems are recognized as valuable abstractions for model checking because they allow for the validation as well as re...

  4. Vague Language in Conference Abstracts

    Science.gov (United States)

    Cutting, Joan

    2012-01-01

    This study examined abstracts for a British Association for Applied Linguistics conference and a Sociolinguistics Symposium, to define the genre of conference abstracts in terms of vague language, specifically universal general nouns (e.g. people) and research general nouns (e.g. results), and to discover if the language used reflected the level…

  5. Food Science and Technology Abstracts.

    Science.gov (United States)

    Cohen, Elinor; Federman, Joan

    1979-01-01

    Introduces the reader to the Food Science and Technology Abstracts, a data file that covers worldwide literature on human food commodities and aspects of food processing. Topics include scope, subject index, thesaurus, searching online, and abstracts; tables provide a comparison of ORBIT and DIALOG versions of the file. (JD)

  6. Abstract models of transfinite reductions

    DEFF Research Database (Denmark)

    Bahr, Patrick

    2010-01-01

    We investigate transfinite reductions in abstract reduction systems. To this end, we study two abstract models for transfinite reductions: a metric model generalising the usual metric approach to infinitary term rewriting and a novel partial order model. For both models we distinguish between...

  7. Technical abstracts: Mechanical engineering, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Broesius, J.Y. (comp.)

    1991-03-01

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing.

  8. Abstract algebra structure and application

    CERN Document Server

    Finston, David R

    2014-01-01

    This text seeks to generate interest in abstract algebra by introducing each new structure and topic via a real-world application. The down-to-earth presentation is accessible to a readership with no prior knowledge of abstract algebra. Students are led to algebraic concepts and questions in a natural way through their everyday experiences. Applications include: Identification numbers and modular arithmetic (linear) error-correcting codes, including cyclic codes ruler and compass constructions cryptography symmetry of patterns in the real plane Abstract Algebra: Structure and Application is suitable as a text for a first course on abstract algebra whose main purpose is to generate interest in the subject, or as a supplementary text for more advanced courses. The material paves the way to subsequent courses that further develop the theory of abstract algebra and will appeal to students of mathematics, mathematics education, computer science, and engineering interested in applications of algebraic concepts.

  9. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Wu Jie and Duan Yanchao. The current line drawing of Laterolog and its application. PI, 2011, 25(4) : 1 - 4 The current line plays an important role in the directly understanding the characteristics of Laterolog tool. A method of drawing current lines for the discrete potential data based on the Finite Element calculation is studied. It solves a series of key problems, including the selection of step length, the identification of direction, treatment of nmtation point and the control of stop. A drawing program is written by MATLAB software. Taking the current line drawing of the dual Laterolog logging as an example, we analyze the tool's investigation characteristics in the several formations such as homogeneous, low or high invasion, and invasion with shoulder. These results verify the effectiveness of the new method. The method can be applied to the other kinds of Laterolog tools to draw their current lines and analyze their investigation characteristics.

  10. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Through-bit-logging (TBL) technology is developed corporately by Shell and Reeves Oil Company. It can replace standard cable logging and logging while drilling technology. It has characteristics of saving cost and convenient operation.The principle is to transmit the logging tool into borehole through drill rod with a special bit. The acquired formation evaluation data are read on surface from the wire line tool or stored in the tool before pulling out the hole.The paper introduces the principle of work, advantages and development trend of TBL, and cases of its application in rough borehole in North Sea fields. Finally development of TBL technology is summarized. Keywords: TBL; logging while drilling wireline logging

  11. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Liu Diren, Xie Weibiao, Yin Qiuli and Zhou Liyan. Study on the Influence of induction logging response on tool eccentricity in horizontal well. Jiang Yiqing, Xu Lin, Wang Jianmin and Du Hui. Simulation of time spectrum by oxygen activation logging.Zhang Jiawei, Song Gongpu, Sai Fang, Xue Zhibo. Design of simulator based on NMR downhole tools.

  12. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Zhang Xionghui, You Chang, Tang Jie, Zhou Qizhi, Xu Feng, Li Ganghan and Ma Yan. Development of a series of logging tool long-time working under high temperature and high pressure condition. PI, 2012,26 (3) : 1-3

  13. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    1.APPLICATION OF VSP TECHNOLOGY OF GREAT WALL DRILLING COMPANY IN OIL AND GAS EXPLORATION ABROAD/Du Xudong., Huang Daqin, Zhao Qihui.2011 (6)8-13 ( Interpretation Research Center of Great Wall Drilling Engineering Company ) Development and perfection of VSP technology have close relationship with the requirements of production. The paper presents 6 aspects of application about VSP technology in oil and gas exploration abroad: lproviding high-precision interpretation result----high-precision time-depth;

  14. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Overview of the development of the hybrid locomotive at home and abroad TIAN Rui, KANG Yi-nan (Dalian Locomotive Research Institute Co., Ltd., Dalian 116021, China ) Abstract: This paper analyzes the structure principle and classification feature of hybrid locomotive from the perspective of energy saving and emission reduction, discussing the key technology and summarizing its development and application at home and abroad. On this basis, the development prospect and problems to be solved of hybrid locomotive are analyzed. Key words: hybrid locomotive; principle; classification; application; prospect

  15. ABSTRACT

    African Journals Online (AJOL)

    identification of the poor and their characteristics; they should be given a chance to ... established to help eradicate the poverty, which include the People Empowerment ... Welfare Service Scheme has programmes like: Special Education ...

  16. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    A Representative work that Vainly Attempts to Westernize China On Yang Ji.sheng's Paper "My View of Chinese Pattern" XU Chong-wenAbstract: Mr. Yang Ji-sheng calls economic connotation of Chinese pattern "market economy of power" with all sorts of drawbacks, it is to take the problems that Chinese model deliberately struggles with and even the objects must be resolutely eliminated as the parts of Chinese pattern, thus they are absolute nonsense; he boils down political connotation of Chinese pattern to "authority politics" of "thoroughly denying modem democratic system",

  17. Abstracts

    National Research Council Canada - National Science Library

    2016-01-01

    ... , Abduljaleel Al Alwan 1,2 , Abeer Ibrahim 4 , Hadi Kuriry 3 , Ali Albenmousa 6 1 Department of Hepatobiliary Sciences, Division of Hepatology, King Abdulaziz Medical City, National Guard Health Affairs, 2...

  18. Abstract

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Representation or Construction? An Interpretation of Quantum Field Theory Abstract: In this essay, I argue that the basic entities in the causality organized hierarchy of entities that quantum field theory describes are not particles but fields. Then I

  19. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On the Logic of Heart and the Intuitive Approach: An Outline of Modern Idealism Linked Chinese and Western Philosophical Ideas,A Reflection and Analogical Interpretation of Active Justice,Channel of the Effectiveness of Public Policy in the Perspective of Social Equality: A Theoretical Analysis of the Efficacy of Public Policy

  20. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Chinese foreign trade enterprises enter the crucial period of transformation and upgrade The global economy is likely into a long-term downturn and recovery is difficult. For a long time, the foreign trade development environment is difficult to be improved obviously. Many negative factors are overlaid and will bring the foreign trade greater challenge. Impacted by the dual factors of intemational market fluctuation, domestic economic environment tightening,

  1. Abstract

    African Journals Online (AJOL)

    dell

    per week; processed in a team work, and finalized by a local work shop accommodating the ... biological, health sciences, social sciences ... the new education and training policy of Ethiopia ...... schools were budget, staff shortage, classrooms ...

  2. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Effect of Coolant Temperature on Fuel Consumption and Emissions in YC6A220C Diesel Engine;Optimizing NOx emission performance for 16V280ZC diesel engine;CA3-13 coupler of DFsBI diesel locomotive exported to Iran;Mixed traction technology with LOCOTROL system;

  3. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Design of the LabVIEW-based test stand for diesel engine hydraulic governor ZHANG Wei-dong1, LIU Li-hua2, ZONG Ya-ping1 ( 1. Air Force Radar Academy, Wuhan 430019, China; 2. Second Artillery Command College, Wuhan 430019, China)Abstract: the test stand The structure for diesel engine and working principle of hydraulic governor were introduced. The user interface, speed governing curves display and data analysis were realized by IabVIEW to conduct calibration and draulic governor diagnosis for diesel engine hy-

  4. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Application of UIC standards to Chinese railway traction diesel engine industry WANG Xian (Dalian Locomotive Research Institute Co., Ltd., Dalian 116021, China) Abstract: The development, main contents and the practical application of the standards for type test for Chinese railway traction diesel engine were discussed. Key words: UIC standards; locomotive diesel en- gine; type test

  5. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Solving the vibration problem of diesel engine and its peripheral equipments with MK II PAK analysis system,Quality situation and analysis of copper radiator for diesel locomotive,Development of cooling system for GMC-96 rail grinding car

  6. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Development status of domestic and foreign hydraulic transmissions;Effect of advance angle of fuel supply on exhaust emissions for a diesel engine with EGR technology;Effect on noise of diesel engine under different atmospheric preessure and biodiesel blends;Application of digital governing system to V280/285 series marine diesel engine;

  7. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Post-Western International System and the Rise of the East;Hegemonlc Dependence and the Logic in the Declining Asceudance of Leading Powers;Constructive Leadership and China's Diplomatic Transformation;The Bargaining Model of International Mediation Onset:A Quantitative Test;The Imnact of Gender Differences on National Military Expenditure

  8. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Establishment and Distribution of the Police Stations in the Public Concessions in Modern Shanghai -Also on the Substitution Index of the Expansion of City Space WU Heng By analyzing relevant materials, this paper finds that the total number of police stations and the population is closely related to each other and regards it as the substitution index of city expansion. The author thinks that the urbanization of the public concessions can be divided into three phases, while this process is not in synchronization with the expansion of the land expansion of public concessions.

  9. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    South Korea's strategy and the economic and trade relations with China South Korea in a relatively short period of time has obtained the economic fast boom, creating "the Han River Miracle" remarkably. Due to the typical export-oriented economy, the South Korea is very sensitive to the international situation.

  10. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Changing the Means of Structural Adjustment for Transformation of Development Pattern SONG Ze Abstract: History of China's reform and opening up has proven that government-led industrial structural adjustment is unsuccessful. Facing the new situation and economic development tasks, new ideas of industrial restructuring should be clearly put forward that the government will create conditions to adjust the structure by the market. During the Twelve-Five Years, the most priority should be how to reform the way how to change the structural adjustment. If the "structural adjustment" approach, especially in the manufacturing sector can not be changed, many goals on economic transition are likely to fall again. Under the circumstance it is necessary to accelerate the development of a unified, open and orderly modern market system, and effectively implement the market-pushed industrial restructuring approach, and strengthen the intermediary function of finance and inner trade and create good policy environment conducive to promoting the services sector in the process of structural adjustment and industrial upgrading. Key Words:industrial structure; adjustment approach

  11. ABSTRACT

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Probe into The Production of Songhua Inkstone in Kangxi period and His Bestowing Them upon His Subjects;A Study of Kiln-Firing Production for Construction of Beijing in The Ming Dynasty: Focus on The Changes of Kiln Sites, Product Structure and Manufacture System of Supplies;More on The Design of The Large Timbers in The Structure of Daxiong Dian(Hall) of Fengguo Temple of Yi County with The Enlightenment from The Latest Research Available;

  12. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Energy transformation is the only way of the transformation of the world economy Describing and explaining from different view of the world from the angle of political, economic, cultural and environmental development, the presentation of the transformation, change, adjustment, conversion and a series of concept reflects that the current world situation is undergoing profound changes, multi-polarization and globalization. The global problems such as financial crisis, recession, climate change, energy transformation and the environment change,

  13. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    "Strategic communication" refers to practices involving the widespreaddissemination of information as well as contact activities for the purpose of nationalstrategic interest and objectives. Though people currently do not have a clearcomprehension of its definition, they are deepening their understanding. There is stillroom for its development in terms of theoretical research and practice. We shouldactively carry out research on mechanism building, communication targets and strategiccommunication content in order to serve our national strategies.

  14. Abstract

    African Journals Online (AJOL)

    The AIDS epidemic has infected more than 50 million and claimed the lives of more than .... or preventive vaccine trials, as well as of HIV-positive women presenting as ... The lack of public understanding of doctors' and/or of scientific methods'.

  15. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Look in the Mirror of Personality Left by Liang Qichao The New Preface to His Reflecting Moral This article is my new foreword of Reflecting Moral, which had been edited and written by Liang Qichao in 1905, and has just been recommended as one of the moral readers of Tsinghua Academy of Chinese Learning. I point that the exhortation of our univer- sity proposed by Liang Qichao has its original determination in his mind himself, which had already been compiled in Reflecting Moral more than a century ago.

  16. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Summary of Construction of a Hz S-based Sulphuric Acid Unit for a Large-sized Synthetic Ammonia Plant/Development and Application of New Process for Yellow Phosphorus Filtration during Yellow Phosphorus Production/Review of the Low-temperature Heat Recovery System of 250 kt/a Sulpharic Acid Plant of Shandong Bofeng/Technology for Combined Production in Compound Phosphate Fertilizer Plant of SHCCIG/Practice of Fouling Removal with Sulphuric Acid in the Cooling Water System of 400 kt/aSulfuric Acid Plant Based on Sulphur Burning/Production of Nitro-compound Fertilizer with Nitric Acid and Sulphuric Acid Method/Application of Tantalum Heat Exchanger and Glass Equipment in Spent Sulphuric Acid Concentration

  17. ABSTRACT

    African Journals Online (AJOL)

    Effect of rural-urban migration of youths on agricultural labour supply in. Umuahia north local .... range of 50-61 years above, only 15% were below 40 years. This means that ... Family labour. 45. 49 ... under severe pressure. CONCLUSION ...

  18. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    When discussing the maturation of Chinese sociology, one has to reconsider the relationsbetween Western sociology and Chinese sociology and distinguish the flows from their sources ifone wants to find a way forward for Chinese sociology. Chinese sociology should view theresources of homegrown sociological tradition as a "source, " which is represented by "qunxue"(literally the study of groups).

  19. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Case Studies of The New Young Man at Ministry of Organization's Editing Li Pin The editing of The New Young Man at Ministry of Organization wins its fame in the modern history of Chinese editing and pub- lishing for its conscious intensification of anti-bureaucracy theme, and its embodiment of the editing pursuit of Qin Zhaoyang, Peo- ple's Literature's executive editor-in-chief. After Mao Zedong's proposal of public criticism, China Writers Association persisted in editing reason, discussed related theoretical and practical problems in the form of panel, and brought forward the title of unknown heroes for editors, which means a milestone in the modern history of Chinese editing principles.

  20. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Mud logging subject and its speciality construction is an important practical issue in the field of mud logging engineering and accurately positioning mud logging subject and reasonably setting mud logging speciality have an important significance for promoting and guiding the rapid development of mud logging technology.

  1. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The establishment of spectroscopy logging theory and application prospects. Zhu Genqing. Mud Logging Engineering, 2011,22(3) :2-6,28 Based on a lot of research and years' practice and set ting out from the purpose of enriching the basic theory of mud logging technology, the author described several spectroscopic methods and theories commonly used in mud logging technology and explored the concept of the spectroscopy logging and the views to establish mud logging theory svstem.

  2. ABSTRACT

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Discussion on the Training Model of Training the Nursing Humanistic Quality by Employing the College English Teaching Li Hongfeng (Nursing College of Zhengzhou University, Zhenghou, Herman, 450052) Read and Write Periodica,vol.8, No.11,27,2011(ISSN1672-1578,in,Chinese) Abstract: The college English, as one of the most important public humanities courses in the curriculum system of collegiate nursing education, its teaching has positive orientation of human values and strong function in humanistic quality education.

  3. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    A bus line inquiry algorithm based on set theory is proposed,and the design flow of transfer algorithm is presented. A plan for improving the efficiency of the inquiry algorithm is put forward. The bus line inquiry algorithm is simple and effective, and it can help user select optimal bus line.

  4. Abstract

    Directory of Open Access Journals (Sweden)

    Alexandre Costa Quintana

    2003-01-01

    Full Text Available The purpose of this article is to show the importance of the Cash Flow Statement and the Value Added Statement as effective instruments of financial management, due to the information that these statements can provide. To demonstrate this, a financial analysis of the principal financial statements of the Empresa Transmissora de Energia Elétrica do Sul do Brasil S.A. – Eletrosul – was made and in particular, a detailed analysis of the Cash Flow Statement and the Value Added Statement. To do this, the financial statements published by the company were obtained. First, liquidity ratios from the Balance Sheet were calculated and, subsequently, an analysis of the Cash Flow Statement and the Value Added Statement was made. This was done to demonstrate that the information obtained from the Balance Sheet could be better detailed by the use of the referenced statements, showing in the end that alterations in the liquidity of the company can be explained by the changes in the ways in which the company used its cash resources.

  5. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Function Ascriptions of Technical Artifacts (p.1) CHEN Fan, XU Jia (Research Center for Philosophy of Science and Technology, Northeastern University, Shenyang, Liaoning, 110004) Abstract: The function of technical artifacts is mind dependent. It is an ontologicaUy subjective entity and an epistemologically objective judgment. Function ascription is a general form of technical function in the epistemological sense. Function ascriptions may be taken in a descriptive and in a performative sense. The former can be called function ascriptions for short and the latter function assignments. The mind dependency of the function of technical artifacts is grounded in performative function ascriptions instead of descriptive function ascriptions. Key Words: Function ascriptions; Descriptive function ascriptions; Performative function ascriptions; Function assignments

  6. ABSTRACT

    African Journals Online (AJOL)

    agricultural extension practitioners should intensify efforts in educating rural farmers ... disease caused by Human immuno-deficiency Virus (HIV), usually found in ... Health experts put Nigeria prevalence rate at 5.4% ranging from a low 1.9% to .... income may increase food and livelihood insecurity and severely undermine ...

  7. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Beliefs and Establishment of Their Orders —— From Sociological Theory Perspectives of Chinese Beliefs LI Xiang-ping Abstract: To understand the "harmonious" phenomena of China's history and culture and their concepts, the key is to understand and recognize its beliefs. Chinese beliefs and their social practice are closely related to establishment of harmonious social, historical and cultural orders in China. In fact, Harmony can refer to either a value target or a social reality, and it is also a kind of belief. The establishment of harmony based on certain beliefs, moral orders, political orders and power orders are basic components of social and cultural harmony. This article, from a sociological theory perspective of beliefs, discusses the positions and roles of different beliefs in building harmonious cultural orders in China, and it then aims to find out some rules of dual changes in Chinese society and Chinese beliefs. Key words: belief; order; harmony; sociological perspectives of belief

  8. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    (1) New Forms of the "Production of Social Relations" under the Scrutiny of Social Engineering Tian Pengying In the Marxist perspective, the production and reproduction of social relations constitute the basic prerequisite and guarantee for human existence and development, and the establishment of an orderly and harmonious modern social relationship that promotes the coordinated development of material production and spiritual production is an important symbol of man's self-conscientiousness to adapt to, rely on and transform the society. The development, transformation and evolution of social relations is both a natural historical process and a creative process in which social subjects participate, design and construct.

  9. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Be Independent from Autocracy: a Comparison Between Wang Yuanhua and Gong Zizhen Also on the Depth of Wang Yuanhua's Thinking on the Eve of the Ideological Emancipation Movement Xia Zhongyi In 1977 ,Wang Yuanhua began to appreciate Gong Zizhen, not only because they were similar in temperament, context and situation, but also because Wang Yuanhua had found out the element of personal liberation in Gong zizhen's saying Be Independent from Autocracy, which shows that Wang Yuanhua's realization of the personal value was earlier than Li Zehou ( who established the Subjectivity Outline in a Kant's Way in 1979 ) and Wang Ruoshui (who proposed that personal value is the basis of Marxism in 1981 ) , and Wang Yuanhua's contribution in study Chinese by Chinese experience.

  10. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Fold distribution, offset distribution and azi- muth distribution in a bin have direct effects on ge- ometry attributes in 3D seismic survey design. If two adjacent bins have the same fold but different offsets, this non-uniform offset distribution brings some stack amplitude diversity in the adjacent bins. At present, 3D geometry attribute uniformi- ty of the most analytical methods is expressed by qualitative analysis chart. We introduce in this pa- per a uniformity quantitative analysis method for offset distribution by average value, square devia- tion and weighting factor. The paper analyses effects on offset distribution uniformity of different 3D geometry parameters by the proposed uniformi- ty quantitative analysis method. Furthermore, the paper analyses effects on seismic stack amplitude or frequency uniformity of different 3D geometry parameters by the seismic wave modeling. The re- suits show that offset distribution uniformity is in good agreement with seismic stack amplitude or frequency uniformity. Therefore this improved method can be considered as a useful tool for ana- lyzing and evaluating 3D geometry attribute uni- formity.

  11. ABSTRACT

    African Journals Online (AJOL)

    administrative interference in staff work and a reasonable reduction in the work load of ... Traditional definition of attitude contains a slightly conception of its meaning. Definitions ..... Conditions for the Design and Management Of. Agricultural ...

  12. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    1.Changes Come from Turmoils, Hopes Reside in Stagnancy,by Zhu Feng a professor at the Schobl ofInternational t/elations, t'eklng University, anu a member oi ecutorlai Doaro oi Peaceand Development and a gust researcher of CDPS. In 2011, "the Arab Spring" changed the geopolitical ecology of the Middle East and North Africa. The U.S. stepped up readjustment to its global strategy with a high-sounding voice proclaimed its "return to Asia Pacific". A great surge was felt in the political trend of thoughts in the world, and the world was still faced with various terrorist threats.

  13. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Analysis of importance of TG Water CultureQuest Yang Bin Fan Lingling ( 1 ) Abstract: The awareness of quest constitutes the essence and demonstrates the basic characteristic of the water culture in the Three Gorges areas. The legend of King Yu controlling floods by dredging the Three Gorges marked the budding of this spirit. Qu Yuan fully demonstrated the essence of the spirit by a frequently quoted saying, "yet high and low I will search with my will unbending", "I will not regret a thousand death to die". The inscription of White Crane Ridge displayed the ancient fashion of the spirit. The construction of the Three Gorges Project interpreted the spirit of exploring of the Three Gorges water culture. The local higher education institution, with its motto "quest", can be taken as a model in carrying forward the spirit of"constant exploration". Key words: awareness of quest; the Three Gorges; water culture

  14. ABSTRACT

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On Chen Xianzhang's Moral Culture Blending Confucianism and Daoism (by ZHANG Yun-- hua) Abstract: Chen Xianzhang, who experienced and witnessed the social changes during the Ming Dynasty, achieved direction change of the scholarship and culture of his time from the rationalistic attitude to the idealistic philosophy through shattering the fetters and bold innovation in order to redeem people's spirit, save society, and rebuild the moral subject philosophy. Chen's elaboration of life and death, suffering and happiness, fame and gain, and retreat and withdrawal in this cultural shift reveals the characteristics of his moral culture blending Confucianism and Daoisrn. Key words: Chen Xianzhang; life and death; suffering and happiness; fame; gain; retreat

  15. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Mao Zedong' s "Three World Theory" underwent three stages of development: the "One Intermediate Zone" thought, the embryonic form of the theory, was put forward in the 1940s-50s; the "Two Intermediate Zones" thought, taking shape in the 1960s, was the rudimentary form; and the early 1970s witnessed the perfection of the theory. Mao Zedong developed the "Three World Theory" with sovereignty and national interests as the logical starting point, the theory of unity of opposites as the philosophical foundation, the Cold War as the historical background, and fighting against hegemonism as the major diplomatic strategy.

  16. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Development and Application of Three-stage and Four-layer Fluorine Removal Technology for Purification of Smelting Flue Gas Removal of fluorine from fluorine-containing smelting gas during the sulphurie acid production provides effective protection for the equipment in the system, and it is al~ a necessary measure to maintain normal prodluetion. For the equipment features and resource conditions in a sulphuric acid plant, the concept of three-stage and four layer fluorine removal is proposed, and the purification technology for fluorine removal is developed through optimization of the process design. Practice has shown that by utilizing the three-stage and four-layer fluorine removal technology, it offers advantages like higher efficiency of fluorine removal, shorter process flow, less equipment investment, easier operation, and offers certain value for promotion.

  17. Abstract

    DEFF Research Database (Denmark)

    Tafdrup, Oliver

    2013-01-01

    Udgivet som en del af Tidskrifts specialudgivelse om Adorno. http://tidskrift.dk/data/50/Aforismesamling.pdf......Udgivet som en del af Tidskrifts specialudgivelse om Adorno. http://tidskrift.dk/data/50/Aforismesamling.pdf...

  18. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Critique of Contemporary Anti-Marxism Ideologies --Based on Thoughts of the "Four Major Boundaries";The Conflict on Public Ownership: A Comparison between the Socialist Market Economic Theory and the Theory of Market Socialism of British Labour Party;On The Germination of Marxist Theory of Property;Aesthetic Transformation of Mass Media for Socialist Core Value System;

  19. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Plato on Political Rhetoric Generally, Plato was regarded as being hostile to rhetoric. However, I will show that in Plato's some important political dialogues he still verifies the significance of rhetoric or persuasion. Then, I list the attacks of Plato on his contemporary rhetoric, which is called in the essay as "politician rhetoric". On the other hand, Plato also articu- lates the characteristics of true rlhetoric, which I name as "dialectical rhetoric. " In order to elaborate "dialectical rhetoric", I take Pericles as an example to show how the dialectic rhetoric could work in the real political world. Finally, I point out that dialectical rhetoric still can give some reflection for today's political rhetoric. It contains the ideal of the good, caring the soul of the audience, speaking the truth, insisting the right thing with reason, etc.

  20. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Ma Xiwu' s trial mode is a model of adjudication in the Shaanxi-Gansu-Ningxia Border Region, resulting from the joint forces of the border region' s specific wartime environment, local environment, the border region' s social transformation and judicial reform as well as many other factors.

  1. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    (1) The Narrative Structure and Mode of Realization of Marx's Theory of Human Emancipation Liu Tongfang Understanding the inherent logic of the ideas in the classic Marxist texts and revealing the narrative structure and mode of realization of Marx's theory of human emancipation is an important intellectual approach to the extension of Marxist theoretical research. As a scientific theory of the history of society, the narrative structure of human emancipation involves three aspects: historical materialism, multi-dimensional forms of emancipation, and communist movements. It offers a comprehensive analysis of the basic way of perceiving human society, the fundamental path to human emancipation and the ultimate aim of the evolution of social forms. It reflects the thorough-going revolutionary nature of Marx's theory of human emancipation and its close relationship with the real life of society. It would thus be academically significant to reflect on Western Marxism, Soviet-type socialism and the socialist road with Chinese characteristics from the viewpoint of the narrative structure of Marx's theory of human emancipation, so as to extend the Marxist theory of human emancipation and explore its specific mode of realization

  2. abstract

    Directory of Open Access Journals (Sweden)

    abstract abstract

    2016-07-01

    Full Text Available Introduction: Strawberry (fragaria×ananassa Duch. fruit characterized by short storage life, often estimated last less than one week even under optimum conditions at 8°C. The loss of fruit quality is often caused by gray mold (Botrytis cinerea that is the most frequent reported postharvest disease in strawberry during storage (6. In recent years, considerable attention has given to elimination of synthetic chemical and fungicides application and development of various alternative strategies for controlling fruit and vegetables diseases (2. One strategy is replacement of natural products with plant origin such as essential oil and methyl salicylate (MeSA. Essential oils are volatile, natural and complex compounds characterized by a strong odor formed by aromatic plants in form of secondary metabolites. In nature, essential similar oils that extract from lavender (Lavandula angustifolia play an important role in protection of the plants against pathogen incidence that can be replaced by synthetic fungicides (1, 4 and 14. MeSA is also a volatile natural compound synthesized from salicylic acid which has an important role in the plant defense-mechanism, as well as plant growth and development (5, 19 and 20. Therefore, the main objective of this research was to study the effects of MeSA and lavender essential oil (LEO on decay control caused by Botrytis cinerea as well as post-harvest quality indices of strawberry fruits during cold storage. Material and Methods: First, antifungal activity was studied by using a contact assay (in vitro, which produces hyphal growth inhibition. Briefly, potato dextrose agar (PDA plates were prepared using 8 cm diameter glass petri dishes and inhibitory percentage was determined. For in-vivo assessment of LEO and MeSA effects on Botrytis-caused fungal disease control, the experiment was conducted as factorial in completely randomized design (CRD with 3 replicates. The treatments were 3 concentration of LEO including 0, 500 and 1000 µl L-1 and 3 level of MeSA including 0, 0.1 and 0.2 mM. After treatment, the fruits were inoculated by Botrytis suspension and transferred to storage and quality parameters were evaluated after 7, 14 and 21 days. At each sampling time, disease incidence, weight loss, titratable acidity, pH, soluble solids content, vitamin C and antioxidant activity were measured. Results and Discussion: The results showed that both LEO and MeSA treatments had significant effects on inhibition of mycelium growth within in-vitro condition (p < 0.05. Inhibition rate of mycelium growth significantly improved by LEO and MeSA concentration increase of, (Table 1. At in-vivo assessment, diseases incidence of treated fruits with 500 µl L-1 LEO and 0.1 mM MeSA were 32% and 64% lower than untreated fruits, respectively (Fig. 1 and 2. During storage period, the percentage of infected fruits increased. In addition, LEO and MeSA treatments affected quality parameters of strawberry fruits including titratable acidity, soluble solids content, vitamin C and antioxidant activity. Treated fruits had a high content of soluble solids, vitamin C and antioxidant activity in comparison to untreated fruits (Table 3 and 4. Probably ascorbic acid decreased through fungal infection duo to cell wall break down during storage. Any factors such as essential oil and salicylate that inhibit fungal growth can help preserving vitamin C in stored products. High level of vitamin C and antioxidant activity was observed in treated fruits with 0.1 mM MeSA and 500 µl L-1 LEO. In controlling weight loss of fruits, 0.2 mM of MeSA and 500 µl L-1 of LEO had significant effects, although MeSA was more effective than LEO treatments, possibly due to elimination of respiration rates and fungi infection (Table 4. Therefore, LEO and MeSA with fungicide effects could be replaced with synthetic fungicides in controlling fungal diseases of strawberry and maintain fruits quality during storage. Conclusion: In conclusion, our results showed that LEO and MeSA treatments could be safe and used to prevent infection of strawberry during storage, although LEO was more effective than MeSA treatments. Concentration of 500 μl L-1 of LEO and 0.1 mM MeSA could control fungal infection of fruits during storage. Also, LEO and MeSA treatments can extend shelf life for over the minimum period required to transit strawberries to foreign markets and without affecting quality, adversely. However, future studies are necessary to fully understand the mechanisms by which LEO and MeSA treatments may act as a fungicide and increase their postharvest life.

  3. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    ( 1 )How does China Appraise the Rising of India Zhao Can-cheng · 1 · Abstract: The rising of India has become an important topic in Chinese Media in the 21st century,and how does China appraise the rising of India is worth discussion. According to the recognition of Chinese official, media and schol- ars on India, this paper discusses the possible impact on China following India's rise and make a prediction on Sino-In- dia relationships. Key Words: China; Appraise ; Rising of India

  4. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Shortly after the People's Republic of China was founded in 1949, it wasnecessary and in its interest for China to join the socialist camp led by the SovietUnion. In 1954, China proposed the five principles of "peaceful coexistence". Atthe Bandung Conference in 1955, China, India and Myanmar jointly advocated thefive principles as a means of good governance in Asia and the whole world. Earlyin the 21st century, China proposed a new concept of "win-win cooperation" as animportant principle for international relations in the new global era.

  5. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Balance and Loss of Balance in Human Rights Law;The Socialist Legal System with Chinese Characteristics: Its Structure, Features and Trends;Historical Materialism and Contemporary Socio-historical Reality;Rousseau, Kant and Marx in the Lineage of "Moral P

  6. Abstract

    OpenAIRE

    Kucrová, Veronika

    2011-01-01

    My thesis deals with the legal aspects of counterfeit trademarks, the competence of Customs Administration in the control of intellectual property rights, labor courts and CTI. My work describe the basic concepts and legal rules governing intellectual property rights. All rights and duties, regulations, agreements and treaties in the field of legal protection designation.

  7. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    On Law Theory of Public Interest : An Analysis Based on the Need Spill Theory;The Theory of the Nature of Harming Society : Its Fate in Contemporary China;Criminal Law Fiction : An Analysis of Its Function and Application Rules;How to Define Illegal Financing : A Critique of Legal Interpretation of Illegal Financing by Supreme Court;

  8. Abstract

    Directory of Open Access Journals (Sweden)

    Maria Jose Carvalho de Souza Domingues

    2003-01-01

    Full Text Available The practice of teaching, in actuality, shows the necessity of teachers and students coming together to form a behavior that is different from the traditional model of teaching. The unity formed from various types of knowledge and the relation between theory and practice show themselves to be fundamental. Starting in 2002, and in search of this unity, a project that hoped to unify the disciplines taught in the second semester of the course in Administration was implemented. During the semester, a single work sought to relate the theories studied with the reality of an organization. Each professor evaluated the works from the point of view of his discipline, as well as the presentation, in general, of the group. It can be affirmed that seeking to bring together various types of knowledge necessarily passes to a rethinking of the postures of teachers and students.

  9. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    4 Introduction of the Methods Generalized from Mineral Exploration HU Kui (Consulting & Research Center Ministry of Land & Resources, Beijing 100035, China) Abstract: This paper focuses on the introduction of prospecting methods generalized from mineral exploration, these include: prospecting in deep part of the deposit based on shallow deposit, and periphery prospecting within the ore district; finding other type ( kind ) of deposit according to this type; lean ore is the base for rich deposit; small rich ore can depends on large lean ore; the dependence of economical mineral resource is uneconomical mineral resource; prospecting mineral deposit on the basis of different minerals; following outcrop mine to find blind ore; and with marks to explore ore.

  10. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Research on the Theory and Standard of Peasants" Life Cycle Pension Compensation Mu Huaizhong Shen Yi· 2 · Thedifficulties of full coverage in pension system lie in rural farmers. In this paper, we put forward a "dual agricultural welfare difference" theory and apply it to the issues regarding peasants' life cycle pension compensation. Taking differential between equilib- rium and biased agricultural incomes as the key indicator, we build mathematical models of "dual agricultural welfare balance" and measure the size from 1953 to 2009. Our finding shows that China's "dual agricultnral welfare difference" has a fluctuation ranged be- tween 0.4 and 0.6. Based on life cycle characteristics, such as natural life cycle, policy and institutional life cycle, our suggestion is to compensate peasants' primary pension with a balance of "dual agriculture welfare difference" and other countermeasures.

  11. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Scientific Culture and Cultural Science (p.1) Today science advances at an astonishingly high speed, and driven by the ideological and industrial revolutions, it even becomes a dominant culture in the society and is respected as the supreme authority. However, the scientific culture, which plays the leading role in the industrial civilization, turns out to be more and more alienated from culture and humanity, resulting in the so-called cultural confusions and loss of humanity. This article, investigating the phenomenon deeply, argues that science has no privileged position over the other cultural traditions, and suggests that science identify itself as a member equal with the other cultural patterns in the society in order to restore its cultural connotations. It is believed that by establishing the cultural science, we can bring culture and humanity back to science.

  12. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Research on the Necessity of Building Intercity Transit System within Changsha-Zhuzhou-Xiangtan Metropolitan Huang Weili 4 To plan and build intercity transit network within Changsha-Zhuzhou-Xiangtan metropolitan will not only meet the rapidly increasing demand for passenger transport service and promoting the integration and urbanization of the metropolitan, but is also the necessary measures to build energy-saving and environmental-friendly society, and realize sustainable development.

  13. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@CONCURRENT SESSION: FOOD AND WATERBORNE DISEASES      Chair  Prof. Liu Xiu-mei, Institute of Nutrition and Food Hygiene (CAPM), China   Co-chair   Dr. Jorgen Schlundt, World Health Organization, Switzerland   1530-1545 hrs Emerging Foodborne Disearse: An Evolving Public Health Challenge   Robert Baldwin, Center for Disease Control, USA   1545-1600 hrs Food Poisoning Typicality in Food Safety Vulnerable Area of Indonesia   Adil Basuki Abza, Bogor Agricultural University, Indonesia   1600-1615 hrs The Management of Food Poisoning in China   Li Tai-ran, Institute of Food Safety Control and Inspection, Ministry of Health, China   1615-1630 hrs Detection of Campylobacter Species Using a Fluorogenic Real-Time PCR Detection System   Hai-yan Wang, Bureau of Microbial Hazards, Health Canada, Canada   1630-1645 hrs An Overview on Bongkrekic Acid Food Poisoning   Liu Xiu-mei, Institute of Nutrition and Food Hygiene (CAPM), China   1645-1700 hrs Screening Procedure from Cattle Feces and the Prevalence of Escherichia coli O157 in Taiwan Dairy Cattle   Chin-Cheng Chou, Taiwan University, Taibei, China

  14. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    4The Current Trends in Global Mineral Exploration and Development LIU Shucken (Information Center of Ministry of Land and Resources, Beijing 100812, China) Abstract: This paper introduces the main issues that the global mineral exploration and development are faced with. The main issues of focus include: the mineral exploration has rapidly recovered from the short depression caused by the effects of global financial crisis; most of the important mineral reserves have continued to grow; there has been continued rapid growth in mining development investment; the supply capacity of mineral products has increased; mergers and acquisitions of mining company are stirring, and multinational mergers & acquisitions has become mainstream,

  15. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    CARBONIFEROUS- PERMIAN PETROLEUM GEOLOGY AND EXPLORATION DIRECTION OF TIAOHU DEPRESSION IN SANTANGHU BASIN;THE APPLICATION OF S- WAVE PARAMETERS BUILDING TECHNOLOGY IN THE LITHOLOGIC RESERVOIRS EXPLORATION;THE IDENTIFICATION TECHNOLOGY AND ITS APPLICATION FOR LITHOLOGY OF NIUDONG VOLCANIC RESERVOIR;CAUSES OF PERMIAN DENSE CONGLOMERATE RESERVOIR AND FAVORABLE BLOCK PREDICTION IN ZHONG GUAI BULGE;

  16. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    THE MAIN SAFETY MEASURES AND VISTA OF THE SUCCESSFUL EXPLORATION AND DEVELOPMENT OF THE " THREE HIGH" GAS FIELD IN NORTH-EAST OF SICHUAN PROVINCE[ 1] Peng Guosheng (SINOPEC Safety & Environmental Protection Bureau, Beijing , 100728) Abstract: Based on the special safety risk of "Three High" gas field in north-east of Sichuan province, this paper makes a systematic analysis on the necessity of special supervising and managing measures taken by SINOPEC during exploration and development.

  17. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Reliability validation studies of locomotive engine turbocharger LI Yu (Dalian Locomotive Research Institute Co., Ltd., Dalian 116021, China) Abstract: Considering the use features of the locomotive diesel engine turbocharger and combining the finite element simulation with experiment, the validation method of tile turbocharger has been studied. In this way, the number of tests can be reduced and the success rate of the test can be increased. And the turbocharger relia- bility assessment can be ahead of the schedule. Key words: turbocharger; reliability; validation test

  18. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Determining Dynamic Rese-rve of Gas R e~servoir by Improved Pressure Drop Method; Mechanical Analysis for Completion String and Its Engineering Applications;Performance Prediction of Natural Depleting Development of Condensate Reservoir with High Gas Condensate Content with a Single Well.

  19. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Adhesive traction test of HXD3 locomotive under simulated rain conditions HAN Chang-hu1, LIU Jie-min2, XU Hao-dong1, SONG Yu-ping1 (1. West Jinan Locomotive Depot, Jinan 250117, China; 2. Jinan Railway Administration, Jinan 250001, China)Abstract: To study the impact of severe weather on HXD3 locomotive adhesive traction force, Jinan Rail- way Administration conducted a adhesive traction test of HXD3 locomotive under simulated rain conditions and accumulated large amount of data for reference.

  20. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Based on engineering practice, this paper applies the finite element method to model the SAC test results of bolted endplate connection. The ductility capacity of a new extended bolted end-plate connection for industrial buildings and structures is analyzed, and the analysis results can be used in engineering design and the development of specifications concerned.

  1. Abstract

    African Journals Online (AJOL)

    Dr Osondu

    2011-10-26

    Oct 26, 2011 ... Ethiopian Journal of Environmental Studies and Management Vol. 4 No.3 2011 ... networks, distribution systems, and other social facilities (Handler and ... water, healthcare, education, sanitation and security. However, the ...

  2. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Power, Space and Inner Structure of Blocks--on Rue Massenet of Shanghai MA Xue - qiang This paper dwells on the formation and change of Rue Massenet in modern Shanghai, and studies Rue Massenet' s history as a road as well as a block. It also investigates the structure of the block and reveals its inner function features. The analysis of Rue Massenet which is regarded as a "sample" of modern block type helps expand and deepen the researches of urban history research.

  3. ABSTRACT

    African Journals Online (AJOL)

    their job performance in Imo state agricultural development programme, Nigeria. ... The blocks are made up of many communities with the block extension .... detailed to rural areas to probably execute government policies and decisions. ... office for about 7 times during the past 12 months, listened to agrie radio talk for ...

  4. ABSTRACT

    African Journals Online (AJOL)

    showed that the per capita calorie intake of the people is 1990 kcal/day while the average household size and dependency ratio were found to be 9 persons and 0.77 .... staple food, and large number of female controlled households suggest.

  5. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    In order to study the state development of fuel-spray in the combustion chamber of TBD620 diesel engine, a spray visualization system was construc-ted by the method of flash photography capturing images of fuel spray at different times. Fuel injection characteris-tics changes were studied by changing the fuel injection pressure and the spray wall-impingement was discovered, which provides a basis of structural optimization for the combustion chamber.

  6. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    This paper introduces the main steps of typical QRA through application of QRA to the risk management of petrochemical construction projects. It explores the limitations of QRA method and points out the role of QRA in risk management of construction proje

  7. ABSTRACT

    African Journals Online (AJOL)

    livestock feeds and diet (RRIN, 1985b). So also is the ... growing on kernels impact their various colours to the seeds (Igeleke and Ekpebor, 1986). Biochemical ... Rotting and caking seed meal (Heating, and production of mycotoxins).Heating ...

  8. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Practice and experience on key equipment localization for Longtan project Abstract: Longtan Hydropower Station is the second largest hydropower station after Three Gorges in those have put into production in China. Based on the idea of "objective, practical and economic", an exploratory investigation to promote the key equipment localization and the national industry revitalization was conducted. The localization of key equipment such as 700MW hydraulic generating unit, 500kV three-phase composite transformer, 500kV crosslinked polyethylene insulated cable and monitoring system for giant hydropower stations was realized successfully. The experience is using for reference in after hydropower projects.

  9. Abstract

    African Journals Online (AJOL)

    ­E¢b

    entrepreneurial attitude (that is measured through achievement and innovation) and .... As such, indigenous entrepreneurial attitudes toward innovation will be restricted ..... http://www.vancouver.wsu.edu/amsrev/theory/lindsay. 05-2005.html.

  10. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    International Norms, Group Identity and Domestic Institutional Re- form: The Case of China's Entrance to FATF Lie Xinghua Abstract: International norms are the collection of binding rules governing the international community. International norms with high levels of legitimacy result in norm groups. Such norm groups directly affect the space for and effectiveness of behavior. In order to enter a norm group and obtain membership status within the group, states must engage in domestic institu- tional reforms in order to meet standards of admission. In order to enter FATF, China studied the principles of the 40+ 9 Recommendations, and ad- vanced comprehensive domestic reforms to counter money laundering.

  11. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Concept Construction and Empirical Analysis of Social Integration for Rural-Urban Migrants in China; Under the Dual Structure of the Triple Migration Model: A Shortage of Migrant Workers, a New Research Framework;Cultural Meanings of Chinese Guanxi: A Viewpoint of Management Scholars;Determinants of Banking Efficiency: Cross-Country Evidence;

  12. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Analysis and forecast of the world economy The pace of global economic recovery has slowed down markedly and the risk of a sagging world economy has been increasing in 2011. However, the economic slowdown was taking place at different speeds in different categories of economies. The momentum of economic recovery in the developed economies is clearly insufficient, and its economic growth rate is far lower than the rate of the emerging economies and has declined much more than that of emerging economies. Many big developed economies are facing very severe employment situation now, while the space of the their fiscal and monetary policies have been compressed by the upgrade of the sovereign debt crisis and long-term low interest rates, which are associated with the turmoil in international financial markets, the sluggish growth of international trade and investment, fluctuations in international commodity prices, and aggravated social problems.

  13. ABSTRACT

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    As the institutional quality audit is being conducted in some pilot provinces,different interpretations of it have occurred,some of which appear to be misleading.This paper is to redefine it in terms of thematic focus,role,value and method to facilitate its implementation.It proposes that the institutional quality audit should keep consistently focused on internal quality assurance,in-volve various stakeholders,enhance its empowerment function and develop itself into a comprehen-sive and systematic approach to continuous quality improvement.

  14. Abstracts

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Analyses and Suggestions on Coordinated Regional Development of Insurance Industry in China GUO Jin-long Abstract: Through studies on the coordinated development status between insurance industry and social economy in China from 2005 to 2009, it is found that the coordination between insurance and economy remains slightly imbalanced in most of the provinces and cities in China, with only a few provinces and cities showing low-degree coordination in 2007. As a whole,

  15. Abstract

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Models of Reduction and Functionalism: Comments on Kim's Reductive Physicalism CHEN Xiaoping (Research Center of System Science and System Management, School of Public Administration, South China Normal University, Guangzhou, Guangdong, 510006) Abstra

  16. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Philosophical Analysis of the Essential Characteristics of Transgenic Technology: Based on the Comparative Studies of Different Breeding Ways (p.1);Public Recognition of the Issue of Technology Ethics of GM Corn in Contemporary China (p.7);Uncertainty of Commercializing GM Crops in China (p.13);Analysis of the Public's Perception of and Attitude to GM Rice and Guidance to Their Behavior: Based on the Data from Social Survey in Hubei Province (p.18)

  17. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Subject of Research, Methodology and Research Paradigm of ‘Das Kapital'; ‘Das Kapital' and the Scientific View of Marx on Wealth;The Way of Capitalism in the Background of Global Financial Crisis;

  18. ABSTRACT

    OpenAIRE

    ÇELİK, Hilal

    2013-01-01

    Discourse analysis takes its place within a larger body of social and cultural researchthat is concerned with the production of meaning through talk and texts. In this study generalprinciples of discourse analysis and how discourse analysis is used in qualitative research arementioned. Theoretical background of discourse analysis based on different fields in socialsciences such as sociology, politic, linguistic, media, psychology, etc... Each of them usediscourse analysis according to their o...

  19. Abstract

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The Characteristics of Modern Tianjin Salt Merchants Culture As a new commercial culture in modern China, Tianjin salt merchants culture has its own different characteristics, such as luxury consumption culture, political culture, religious scholar culture and moral culture. In these cultures behind embodies the Salter group's behavior pattern and psychological structure.

  20. ABSTRACTS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The paper summarized the status of foreign mud log- ging technology from geological logging, engineering logging and mud logging informalization and put forward the future development direction of mud logging technique. The abroad geological logging focuses on micro-nalysis, in which the cutting CT scan, laser element analysis and field gamma scan are used as important means of setting up the geological profiles.