WorldWideScience

Sample records for hydraulic-fracture treatments geologic

  1. Treatment of hydraulic fracturing wastewater by wet air oxidation.

    Science.gov (United States)

    Wang, Wei; Yan, Xiuyi; Zhou, Jinghui; Ma, Jiuli

    2016-01-01

    Wastewater produced by hydraulic fracturing for oil and gas production is characterized by high salinity and high chemical oxygen demand (COD). We applied a combination of flocculation and wet air oxidation technology to optimize the reduction of COD in the treatment of hydraulic fracturing wastewater. The experiments used different values of flocculant, coagulant, and oxidizing agent added to the wastewater, as well as different reaction times and treatment temperatures. The use of flocculants for the pretreatment of fracturing wastewater was shown to improve treatment efficiency. The addition of 500 mg/L of polyaluminum chloride (PAC) and 20 mg/L of anionic polyacrylamide (APAM) during pretreatment resulted in a COD removal ratio of 8.2% and reduced the suspended solid concentration of fracturing wastewater to 150 mg/L. For a solution of pretreated fracturing wastewater with 12 mL of added H2O2, the COD was reduced to 104 mg/L when reacted at 300 °C for 75 min, and reduced to 127 mg/L when reacted at the same temperature for 45 min while using a 1 L autoclave. An optimal combination of these parameters produced treated wastewater that met the GB 8978-1996 'Integrated Wastewater Discharge Standard' level I emission standard.

  2. Treatment Process Requirements for Waters Containing Hydraulic Fracturing Chemicals

    Science.gov (United States)

    Stringfellow, W. T.; Camarillo, M. K.; Domen, J. K.; Sandelin, W.; Varadharajan, C.; Cooley, H.; Jordan, P. D.; Heberger, M. G.; Reagan, M. T.; Houseworth, J. E.; Birkholzer, J. T.

    2015-12-01

    A wide variety of chemical additives are used as part of the hydraulic fracturing (HyF) process. There is concern that HyF chemicals will be released into the environment and contaminate drinking water, agricultural water, or other water used for beneficial purposes. There is also interest in using produced water (water extracted from the subsurface during oil and gas production) for irrigation and other beneficial purposes, especially in the arid Southwest US. Reuse of produced water is not speculative: produced water can be low in salts and is being used in California for irrigation after minimal treatment. In this study, we identified chemicals that are used for hydraulic fracturing in California and conducted an analysis to determine if those chemicals would be removed by a variety of technically available treatment processes, including oil/water separation, air stripping, a variety of sorption media, advanced oxidation, biological treatment, and a variety of membrane treatment systems. The approach taken was to establish major physiochemical properties for individual chemicals (log Koc, Henry's constant, biodegradability, etc.), group chemicals by function (e.g corrosion inhibition, biocides), and use those properties to predict the fate of chemical additives in a treatment process. Results from this analysis is interpreted in the context of what is known about existing systems for the treatment of produced water before beneficial reuse, which includes a range of treatment systems from oil/water separators (the most common treatment) to sophisticated treatment trains used for purifying produced water for groundwater recharge. The results show that most HyF chemical additives will not be removed in existing treatment systems, but that more sophisticated treatment trains can be designed to remove additives before beneficial reuse.

  3. Engineering geological characteristics and the hydraulic fracture propagation mechanism of the sand-shale interbedded formation in the Xu5 reservoir

    Science.gov (United States)

    Lu, Cong; Li, Mei; Guo, Jian-Chun; Tang, Xu-Hai; Zhu, Hai-Yan; Yong-Hui, Wang; Liang, Hao

    2015-06-01

    In the Xu5 formation the sandstone reservoir and the shale reservoir are interbedded with each other. The average thickness of each formation is about 8 m, which increases the difficulty of the hydraulic fracturing treatment. The shale thickness ratio (the ratio of shale thickness to formation thickness) is 55-62.5%. The reservoir is characterized by ultra-low porosity and permeability. The brittleness index of sandstone is 0.5-0.8, and the brittleness index of shale is 0.3-0.8. Natural fractures are poorly developed and are mainly horizontal and at a low angle. The formation strength is medium and the reservoir is of the hybrid strike-slip fault and reverse fault stress regime. The difference between the minimum principal stress and the vertical stress is small, and the maximum horizontal principal stress is 20 MPa higher than the minimum horizontal principal stress and vertical stress. A mechanical model of a hydraulic fracture encountering natural fractures is built according to geological characteristics. Fracture mechanics theory is then used to establish a hydraulic fracturing model coupling the seepage-stress-damage model to simulate the initiation and propagation of a fracture. The hydraulic fracture geometry is mainly I-shaped and T-shaped, horizontal propagation dominates the extension, and vertical propagation is limited. There is a two to three meter stress diversion area around a single hydraulic fracture. The stress diversion between a hydraulic fracture and a natural fracture is advantageous in forming a complex fracture. The research results can provide theoretical guidance for tight reservoir fracturing design.

  4. Physical-chemical evaluation of hydraulic fracturing chemicals in the context of produced water treatment.

    Science.gov (United States)

    Camarillo, Mary Kay; Domen, Jeremy K; Stringfellow, William T

    2016-12-01

    Produced water is a significant waste stream that can be treated and reused; however, the removal of production chemicals-such as those added in hydraulic fracturing-must be addressed. One motivation for treating and reusing produced water is that current disposal methods-typically consisting of deep well injection and percolation in infiltration pits-are being limited. Furthermore, oil and gas production often occurs in arid regions where there is demand for new water sources. In this paper, hydraulic fracturing chemical additive data from California are used as a case study where physical-chemical and biodegradation data are summarized and used to screen for appropriate produced water treatment technologies. The data indicate that hydraulic fracturing chemicals are largely treatable; however, data are missing for 24 of the 193 chemical additives identified. More than one-third of organic chemicals have data indicating biodegradability, suggesting biological treatment would be effective. Adsorption-based methods and partitioning of chemicals into oil for subsequent separation is expected to be effective for approximately one-third of chemicals. Volatilization-based treatment methods (e.g. air stripping) will only be effective for approximately 10% of chemicals. Reverse osmosis is a good catch-all with over 70% of organic chemicals expected to be removed efficiently. Other technologies such as electrocoagulation and advanced oxidation are promising but lack demonstration. Chemicals of most concern due to prevalence, toxicity, and lack of data include propargyl alcohol, 2-mercaptoethyl alcohol, tetrakis hydroxymethyl-phosphonium sulfate, thioglycolic acid, 2-bromo-3-nitrilopropionamide, formaldehyde polymers, polymers of acrylic acid, quaternary ammonium compounds, and surfactants (e.g. ethoxylated alcohols). Future studies should examine the fate of hydraulic fracturing chemicals in produced water treatment trains to demonstrate removal and clarify interactions

  5. Hydraulic-fracture stimulation treatments at East Mesa, Well 58-30. Geothermal-reservoir well-stimulation program

    Energy Technology Data Exchange (ETDEWEB)

    1981-02-01

    East Mesa Well 58-30 was selected for two stimulation treatments: a conventional hydraulic fracture in a deep, low permeability interval, and a dendritic fracture in a shallow, high permeability interval of completion. The well selection, pre-stimulation evaluation, fracture treatment design, and post-stimulation evaluation are presented.

  6. Characterization of hydraulic fracturing flowback water in Colorado: Implications for water treatment

    Science.gov (United States)

    Lester, Yaal; Ferrer, Imma; Thurman, E. Michael; Sitterley, Kurban A.; Korak, Julie A.; Aiken, George R.; Linden, Karl G.

    2015-01-01

    A suite of analytical tools was applied to thoroughly analyze the chemical composition of an oil/gas well flowback water from the Denver–Julesburg (DJ) basin in Colorado, and the water quality data was translated to propose effective treatment solutions tailored to specific reuse goals. Analysis included bulk quality parameters, trace organic and inorganic constituents, and organic matter characterization. The flowback sample contained salts (TDS = 22,500 mg/L), metals (e.g., iron at 81.4 mg/L) and high concentration of dissolved organic matter (DOC = 590 mgC/L). The organic matter comprised fracturing fluid additives such as surfactants (e.g., linear alkyl ethoxylates) and high levels of acetic acid (an additives' degradation product), indicating the anthropogenic impact on this wastewater. Based on the water quality results and preliminary treatability tests, the removal of suspended solids and iron by aeration/precipitation (and/or filtration) followed by disinfection was identified as appropriate for flowback recycling in future fracturing operations. In addition to these treatments, a biological treatment (to remove dissolved organic matter) followed by reverse osmosis desalination was determined to be necessary to attain water quality standards appropriate for other water reuse options (e.g., crop irrigation). The study provides a framework for evaluating site-specific hydraulic fracturing wastewaters, proposing a suite of analytical methods for characterization, and a process for guiding the choice of a tailored treatment approach.

  7. A Biofilm Treatment Approach for Produced Water from Hydraulic Fracturing Using Engineered Microbial Mats

    Science.gov (United States)

    Akyon, B.; Stachler, E.; Bibby, K. J.

    2015-12-01

    Hydraulic fracturing results in large volumes of wastewater, called "produced water". Treatment of produced water is challenged by its high salt, organic compound, and radionuclide concentrations. Current disposal approaches include deep well injection and physical-chemical treatment for surface disposal; however, deep well injection has been recently linked to induced seismicity and physical-chemical treatments suffer from fouling and high cost. The reuse of the produced water has emerged as a desirable management option; however, this requires pretreatment to generate a water of usable quality and limit microbial activity. Biological treatment is an underexplored area in produced water management and has the potential to remove organics and reduce overall costs for physiochemical treatment or reuse. Suspended growth biological treatment techniques are known to be limited by salinity motivating a more robust biofilm approach: 'microbial mats'. In this study, we used engineered microbial mats as a biofilm treatment for the produced water. Evaluation of the biodegradation performance of microbial mats in synthetic and real produced waters showed microbial activity at up to 100,000 mg/L TDS concentration (three times the salt concentration of the ocean). Organic removal rates reached to 1.45 mg COD/gramwet-day at 91,351 mg/L TDS in real produced water samples and initial evaluation demonstrated the potential for field-scale application. Metagenomic analyses of microbial mats demonstrated an adaptive shift in the microbial community treating different samples, suggesting the wide applicability of this treatment approach for produced waters with varying chemical composition. On-going studies focus on the evaluation of the removal of the organics and the contaminants of high concern in produced water using microbial mats as well as the effect of the biofilm growth conditions on the biodegradation in changing salt concentrations.

  8. Complex Fluids and Hydraulic Fracturing.

    Science.gov (United States)

    Barbati, Alexander C; Desroches, Jean; Robisson, Agathe; McKinley, Gareth H

    2016-06-07

    Nearly 70 years old, hydraulic fracturing is a core technique for stimulating hydrocarbon production in a majority of oil and gas reservoirs. Complex fluids are implemented in nearly every step of the fracturing process, most significantly to generate and sustain fractures and transport and distribute proppant particles during and following fluid injection. An extremely wide range of complex fluids are used: naturally occurring polysaccharide and synthetic polymer solutions, aqueous physical and chemical gels, organic gels, micellar surfactant solutions, emulsions, and foams. These fluids are loaded over a wide range of concentrations with particles of varying sizes and aspect ratios and are subjected to extreme mechanical and environmental conditions. We describe the settings of hydraulic fracturing (framed by geology), fracturing mechanics and physics, and the critical role that non-Newtonian fluid dynamics and complex fluids play in the hydraulic fracturing process.

  9. Data regarding hydraulic fracturing distributions and treatment fluids, additives, proppants, and water volumes applied to wells drilled in the United States from 1947 through 2010

    Science.gov (United States)

    Gallegos, Tanya J.; Varela, Brian A.

    2015-01-01

    Comprehensive, published, and publicly available data regarding the extent, location, and character of hydraulic fracturing in the United States are scarce. The objective of this data series is to publish data related to hydraulic fracturing in the public domain. The spreadsheets released with this data series contain derivative datasets aggregated temporally and spatially from the commercial and proprietary IHS database of U.S. oil and gas production and well data (IHS Energy, 2011). These datasets, served in 21 spreadsheets in Microsoft Excel (.xlsx) format, outline the geographical distributions of hydraulic fracturing treatments and associated wells (including well drill-hole directions) as well as water volumes, proppants, treatment fluids, and additives used in hydraulic fracturing treatments in the United States from 1947 through 2010. This report also describes the data—extraction/aggregation processing steps, field names and descriptions, field types and sources. An associated scientific investigation report (Gallegos and Varela, 2014) provides a detailed analysis of the data presented in this data series and comparisons of the data and trends to the literature.

  10. Microbial mats as a biological treatment approach for saline wastewaters: the case of produced water from hydraulic fracturing.

    Science.gov (United States)

    Akyon, Benay; Stachler, Elyse; Wei, Na; Bibby, Kyle

    2015-05-19

    Treatment of produced water, i.e. wastewater from hydraulic fracturing, for reuse or final disposal is challenged by both high salinity and the presence of organic compounds. Organic compounds in produced water may foul physical-chemical treatment processes or support microbial corrosion, fouling, and sulfide release. Biological approaches have potential applications in produced water treatment, including reducing fouling of physical-chemical treatment processes and decreasing biological activity during produced water holding; however, conventional activated sludge treatments are intolerant of high salinity. In this study, a biofilm treatment approach using constructed microbial mats was evaluated for biodegradation performance, microbial community structure, and metabolic potential in both simulated and real produced water. Results demonstrated that engineered microbial mats are active at total dissolved solids (TDS) concentrations up to at least 100,000 mg/L, and experiments in real produced water showed a biodegradation capacity of 1.45 mg COD/gramwet-day at a TDS concentration of 91,351 mg/L. Additionally, microbial community and metagenomic analyses revealed an adaptive microbial community that shifted based upon the sample being treated and has the metabolic potential to degrade a wide array of contaminants, suggesting the potential of this approach to treat produced waters with varying composition.

  11. A review on hydraulic fracturing of unconventional reservoir

    Directory of Open Access Journals (Sweden)

    Quanshu Li

    2015-03-01

    Full Text Available Hydraulic fracturing is widely accepted and applied to improve the gas recovery in unconventional reservoirs. Unconventional reservoirs to be addressed here are with very low permeability, complicated geological settings and in-situ stress field etc. All of these make the hydraulic fracturing process a challenging task. In order to effectively and economically recover gas from such reservoirs, the initiation and propagation of hydraulic fracturing in the heterogeneous fractured/porous media under such complicated conditions should be mastered. In this paper, some issues related to hydraulic fracturing have been reviewed, including the experimental study, field study and numerical simulation. Finally the existing problems that need to be solved on the subject of hydraulic fracturing have been proposed.

  12. Co-treatment of abandoned mine drainage and Marcellus Shale flowback water for use in hydraulic fracturing.

    Science.gov (United States)

    He, Can; Zhang, Tieyuan; Vidic, Radisav D

    2016-11-01

    Flowback water generated during shale gas extraction in Pennsylvania is mostly reused for hydraulic fracturing operation. Abandoned mine drainage (AMD), one of the most widespread threats to water quality in Pennsylvania, can potentially serve as a make-up water source to enable flowback water reuse. This study demonstrated co-treatment of flowback water and AMD produced in northeastern Pennsylvania in a pilot-scale system consisting of rapid mix reactor, flocculation tank and sedimentation tank. Sulfate concentration in the finished water can be controlled at a desired level (i.e., below 100 mg/L) by adjusting the ratio of flowback water and AMD in the influent. Fe(3+) contained in the AMD can serve as a coagulant to enhance the removal of suspended solids, during which Fe(2+) is co-precipitated and the total iron is reduced to a desirable level. Solid waste generated in this process (i.e., barite) will incorporate over 99% of radium present in the flowback water, which offers the possibility to control the fate of naturally occurring radioactive materials (NORM) brought to the surface by unconventional gas extraction. Sludge recirculation in the treatment process can be used to increase the size of barite particles formed by mixing flowback water and AMD to meet specifications for use as a weighting agent in drilling fluid. This alternative management approach for NORM can be used to offset the treatment cost and promote flowback water reuse, reduce environmental impacts of AMD and reduce pressure on fresh water sources. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Trends in hydraulic fracturing distributions and treatment fluids, additives, proppants, and water volumes applied to wells drilled in the United States from 1947 through 2010: data analysis and comparison to the literature

    Science.gov (United States)

    Gallegos, Tanya J.; Varela, Brian A.

    2015-01-01

    Hydraulic fracturing is presently the primary stimulation technique for oil and gas production in low-permeability, unconventional reservoirs. Comprehensive, published, and publicly available information regarding the extent, location, and character of hydraulic fracturing in the United States is scarce. This national spatial and temporal analysis of data on nearly 1 million hydraulically fractured wells and 1.8 million fracturing treatment records from 1947 through 2010 (aggregated in Data Series 868) is used to identify hydraulic fracturing trends in drilling methods and use of proppants, treatment fluids, additives, and water in the United States. These trends are compared to the literature in an effort to establish a common understanding of the differences in drilling methods, treatment fluids, and chemical additives and of how the newer technology has affected the water use volumes and areal distribution of hydraulic fracturing. Historically, Texas has had the highest number of records of hydraulic fracturing treatments and associated wells in the United States documented in the datasets described herein. Water-intensive horizontal/directional drilling has also increased from 6 percent of new hydraulically fractured wells drilled in the United States in 2000 to 42 percent of new wells drilled in 2010. Increases in horizontal drilling also coincided with the emergence of water-based “slick water” fracturing fluids. As such, the most current hydraulic fracturing materials and methods are notably different from those used in previous decades and have contributed to the development of previously inaccessible unconventional oil and gas production target areas, namely in shale and tight-sand reservoirs. Publicly available derivative datasets and locations developed from these analyses are described.

  14. Low-energy hydraulic fracturing wastewater treatment via AC powered electrocoagulation with biochar.

    Science.gov (United States)

    Lobo, Fernanda Leite; Wang, Heming; Huggins, Tyler; Rosenblum, James; Linden, Karl G; Ren, Zhiyong Jason

    2016-05-15

    Produced and flowback waters are the largest byproducts associated with unconventional oil and gas exploration and production. Sustainable and low cost technologies are needed to treat and reuse this wastewater to avoid the environmental problems associated with current management practices (i.e., deep well injection). This study presents a new process to integrate AC-powered electrocoagulation (EC) with granular biochar to dramatically reduce energy use and electrode passivation while achieving high treatment efficiency. Results show achieving a 99% turbidity and TSS removal for the AC-EC-biochar system only used 0.079 kWh/m(3) or 0.15 kWh/kg TSS, which is 70% lower than traditional DC-EC systems and orders of magnitude lower than previous studies. The amount of biochar added positively correlates with energy saving, and further studies are needed to improve organic carbon and salt removal through system integration.

  15. Advanced Hydraulic Fracturing Technology for Unconventional Tight Gas Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Holditch; A. Daniel Hill; D. Zhu

    2007-06-19

    The objectives of this project are to develop and test new techniques for creating extensive, conductive hydraulic fractures in unconventional tight gas reservoirs by statistically assessing the productivity achieved in hundreds of field treatments with a variety of current fracturing practices ranging from 'water fracs' to conventional gel fracture treatments; by laboratory measurements of the conductivity created with high rate proppant fracturing using an entirely new conductivity test - the 'dynamic fracture conductivity test'; and by developing design models to implement the optimal fracture treatments determined from the field assessment and the laboratory measurements. One of the tasks of this project is to create an 'advisor' or expert system for completion, production and stimulation of tight gas reservoirs. A central part of this study is an extensive survey of the productivity of hundreds of tight gas wells that have been hydraulically fractured. We have been doing an extensive literature search of the SPE eLibrary, DOE, Gas Technology Institute (GTI), Bureau of Economic Geology and IHS Energy, for publicly available technical reports about procedures of drilling, completion and production of the tight gas wells. We have downloaded numerous papers and read and summarized the information to build a database that will contain field treatment data, organized by geographic location, and hydraulic fracture treatment design data, organized by the treatment type. We have conducted experimental study on 'dynamic fracture conductivity' created when proppant slurries are pumped into hydraulic fractures in tight gas sands. Unlike conventional fracture conductivity tests in which proppant is loaded into the fracture artificially; we pump proppant/frac fluid slurries into a fracture cell, dynamically placing the proppant just as it occurs in the field. From such tests, we expect to gain new insights into some of the critical

  16. Hydraulic Fracturing and the Environment

    Science.gov (United States)

    Ayatollahy Tafti, T.; Aminzadeh, F.; Jafarpour, B.; de Barros, F.

    2013-12-01

    In this presentation, we highlight two key environmental concerns of hydraulic fracturing (HF), namely induced seismicity and groundwater contamination (GC). We examine the induced seismicity (IS) associated with different subsurface fluid injection and production (SFIP) operations and the key operational parameters of SFIP impacting it. In addition we review the key potential sources for possible water contamination. Both in the case of IS and GC we propose modeling and data analysis methods to quantify the risk factors to be used for monitoring and risk reduction. SFIP include presents a risk in hydraulic fracturing, waste water injection, enhanced oil recovery as well as geothermal energy operations. Although a recent report (NRC 2012) documents that HF is not responsible for most of the induced seismicities, we primarily focus on HF here. We look into vaious operational parameters such as volume and rate of water injection, the direction of the well versus the natural fracture network, the depth of the target and the local stress field and fault system, as well as other geological features. The latter would determine the potential for triggering tectonic related events by small induced seismicity events. We provide the building blocks for IS risk assessment and monitoring. The system we propose will involve adequate layers of complexity based on mapped seismic attributes as well as results from ANN and probabilistic predictive modeling workflows. This leads to a set of guidelines which further defines 'safe operating conditions' and 'safe operating zones' which will be a valuable reference for future SFIP operations. We also illustrate how HF can lead to groundwater aquifer contamination. The source of aquifer contamination can be the hydrocarbon gas or the chemicals used in the injected liquid in the formation. We explore possible pathways of contamination within and discuss the likelihood of contamination from each source. Many of the chemical compounds used

  17. Monitoring hydraulic fracturing with seismic emission volume

    Science.gov (United States)

    Niu, F.; Tang, Y.; Chen, H.; TAO, K.; Levander, A.

    2014-12-01

    Recent developments in horizontal drilling and hydraulic fracturing have made it possible to access the reservoirs that are not available for massive production in the past. Hydraulic fracturing is designed to enhance rock permeability and reservoir drainage through the creation of fracture networks. Microseismic monitoring has been proven to be an effective and valuable technology to image hydraulic fracture geometry. Based on data acquisition, seismic monitoring techniques have been divided into two categories: downhole and surface monitoring. Surface monitoring is challenging because of the extremely low signal-to-noise ratio of the raw data. We applied the techniques used in earthquake seismology and developed an integrated monitoring system for mapping hydraulic fractures. The system consists of 20 to 30 state-of-the-art broadband seismographs, which are generally about hundreds times more sensible than regular geophones. We have conducted two experiments in two basins with very different geology and formation mechanism in China. In each case, we observed clear microseismic events, which may correspond to the induced seismicity directly associated with fracturing and the triggered ones at pre-existing faults. However, the magnitude of these events is generally larger than magnitude -1, approximately one to two magnitudes larger than those detected by downhole instruments. Spectrum-frequency analysis of the continuous surface recordings indicated high seismic energy associated with injection stages. The seismic energy can be back-projected to a volume that surrounds each injection stage. Imaging seismic emission volume (SEV) appears to be an effective way to map the stimulated reservior volume, as well as natural fractures.

  18. The hydraulic fracturing of geothermal formations

    Energy Technology Data Exchange (ETDEWEB)

    Naceur, K. Ben; Economides, M.J.; Schlumberger, Dowell

    1988-01-01

    Hydraulic fracturing has been attempted in geothermal formations as a means to stimulate both production and injection wells. Since most geothermal formations contain fissures and on occasion massive natural fissures, the production behavior of the man-made fractures results in certain characteristic trends. A model is offered that allows the presence of a finite or infinite conductivity fracture intercepting a fissured medium. The method is based on a numerical discretization of the formation allowing transient interporosity flow. Type curves for pressure drawdown and cumulative production are given for infinite acting and closed reservoirs. Since most of the fissured formations exhibit a degree of anisotropy, the effects of the orientation of the hydraulic fracture with respect to the fissure planes, and of the ratio between the directional permeabilities are then discussed. Guidelines are offered as to the size of appropriate stimulation treatments based on the observed fissured behavior of the reservoir.

  19. Hydraulic fracturing system and method

    Energy Technology Data Exchange (ETDEWEB)

    Ciezobka, Jordan; Salehi, Iraj

    2017-02-28

    A hydraulic fracturing system and method for enhancing effective permeability of earth formations to increase hydrocarbon production, enhance operation efficiency by reducing fluid entry friction due to tortuosity and perforation, and to open perforations that are either unopened or not effective using traditional techniques, by varying a pump rate and/or a flow rate to a wellbore.

  20. Hydraulic Fracture Containment in Sand

    NARCIS (Netherlands)

    Dong, Y.

    2010-01-01

    The mechanism of hydraulic fracturing in soft, high permeability material is considered fundamentally different from that in hard, low permeability rock, where a tensile fracture is created and conventional linear elastic fracture mechanics (LEFM) applies. The fracturing and associated modeling work

  1. [Hydraulic fracturing - a hazard for drinking water?].

    Science.gov (United States)

    Ewers, U; Gordalla, B; Frimmel, F

    2013-11-01

    Hydraulic fracturing (fracking) is a technique used to release and promote the extraction of natural gas (including shale gas, tight gas, and coal bed methane) from deep natural gas deposits. Among the German public there is great concern with regard to the potential environmental impacts of fracking including the contamination of ground water, the most important source of drinking water in Germany. In the present article the risks of ground water contamination through fracking are discussed. Due to the present safety requirements and the obligatory geological and hydrogeological scrutiny of the underground, which has to be performed prior to fracking, the risk of ground water contamination by fracking can be regarded as very low. The toxicity of chemical additives of fracking fluids is discussed. It is recommended that in the future environmental impact assessment and approval of fracs should be performed by the mining authorities in close cooperation with the water authorities. Furthermore, it is recommended that hydraulic fracturing in the future should be accompanied by obligatory ground water monitoring.

  2. Recent Developments in Multiscale and Multiphase Modelling of the Hydraulic Fracturing Process

    Directory of Open Access Journals (Sweden)

    Yong Sheng

    2015-01-01

    Full Text Available Recently hydraulic fracturing of rocks has received much attention not only for its economic importance but also for its potential environmental impact. The hydraulically fracturing technique has been widely used in the oil (EOR and gas (EGR industries, especially in the USA, to extract more oil/gas through the deep rock formations. Also there have been increasing interests in utilising the hydraulic fracturing technique in geological storage of CO2 in recent years. In all cases, the design and implementation of the hydraulic fracturing process play a central role, highlighting the significance of research and development of this technique. However, the uncertainty behind the fracking mechanism has triggered public debates regarding the possible effect of this technique on human health and the environment. This has presented new challenges in the study of the hydraulic fracturing process. This paper describes the hydraulic fracturing mechanism and provides an overview of past and recent developments of the research performed towards better understandings of the hydraulic fracturing and its potential impacts, with particular emphasis on the development of modelling techniques and their implementation on the hydraulic fracturing.

  3. Hydraulic fracture design and optimization of gas storage wells

    Energy Technology Data Exchange (ETDEWEB)

    Mohaghegh, S.; Ameri, S. [Petroleum and Natural Gas and Engineering Department, West Virginia University, P.O. Box 6070, Morgantown, WV (United States); Balanb, B. [Schlumberger Austin Product Center, 8311 North FM 620 Road, Austin, TX (United States); Platon, V. [Baker Atlas, 10201 Westheimer Rd., Houston, TX (United States)

    1999-10-01

    Conventional hydraulic fracture design and optimization involves the use of two- or three-dimensional hydraulic fracture simulators. These simulators need a wealth of reservoir data as input to provide users with usable results. In many cases, such data are not available or very expensive to acquire. This paper provides a new methodology that can be used in cases where detail reservoir data are not available or prohibitively expensive to acquire. Through the use of two virtual intelligence techniques, namely neural networks and genetic algorithms, hydraulic fracture treatments are designed using only the available data. The unique design optimization method presented here is a logical continuation of the study that was presented in two previous papers [McVey et al., 1996, Identification of parameters influencing the response of gas storage wells to hydraulic fracturing with the aid of a neural network, SPE Computer Applications Journal, Apr., 54-57; Mohaghegh et al., 1996b, Predicting well stimulation results in a gas storage field in the absence of reservoir data, using neural networks, SPE Reservoir Engineering Journal, Nov., 54-57]. A quick review of these papers is included here. This method will use the available data on each well, which includes basic well information, production history and results of previous frac job treatments, and provides engineer with a detail optimum hydraulic fracture design unique to each well. The expected post-hydraulic fracture deliverability for the designed treatment is also provided to assist engineers in estimating incremental increase in recovery to be used in economic calculations. There are no simulated data throughout this study and all data used for development and verification of all methods are actual field data.

  4. Optimisation of the Near-Wellbore Geometry of Hydraulic Fractures Propagating from Cased Perforated Completions

    NARCIS (Netherlands)

    van de Ketterij, R.G.

    2001-01-01

    Hydraulic fracturing is a technique frequently used to stimulate the production of an oil or gas well by creating a fracture in the porous rock around the wellbore. The success of a hydraulic fracture treatment depends heavily on the created fracture geometry. The optimum situation arises when a sin

  5. Transport efficiency and dynamics of hydraulic fracture networks

    Science.gov (United States)

    Sachau, Till; Bons, Paul; Gomez-Rivas, Enrique

    2015-08-01

    Intermittent fluid pulses in the Earth's crust can explain a variety of geological phenomena, for instance the occurrence of hydraulic breccia. Fluid transport in the crust is usually modeled as continuous darcian flow, ignoring that sufficient fluid overpressure can cause hydraulic fractures as fluid pathways with very dynamic behavior. Resulting hydraulic fracture networks are largely self-organized: opening and healing of hydraulic fractures depends on local fluid pressure, which is, in turn, largely controlled by the fracture network. We develop a crustal-scale 2D computer model designed to simulate this process. To focus on the dynamics of the process we chose a setup as simple as possible. Control factors are constant overpressure at a basal fluid source and a constant 'viscous' parameter controlling fracture-healing. Our results indicate that at large healing rates hydraulic fractures are mobile, transporting fluid in intermittent pulses to the surface and displaying a 1/fα behavior. Low healing rates result in stable networks and constant flow. The efficiency of the fluid transport is independent from the closure dynamics of veins or fractures. More important than preexisting fracture networks is the distribution of fluid pressure. A key requirement for dynamic fracture networks is the presence of a fluid pressure gradient.

  6. Transport efficiency and dynamics of hydraulic fracture networks

    Directory of Open Access Journals (Sweden)

    Till eSachau

    2015-08-01

    Full Text Available Intermittent fluid pulses in the Earth's crust can explain a variety of geological phenomena, for instance the occurrence of hydraulic breccia. Fluid transport in the crust is usually modeled as continuous darcian flow, ignoring that sufficient fluid overpressure can cause hydraulic fractures as fluid pathways with very dynamic behavior. Resulting hydraulic fracture networks are largely self-organized: opening and healing of hydraulic fractures depends on local fluid pressure, which is, in turn, largely controlled by the fracture network. We develop a crustal-scale 2D computer model designed to simulate this process. To focus on the dynamics of the process we chose a setup as simple as possible. Control factors are constant overpressure at a basal fluid source and a constant 'viscous' parameter controlling fracture-healing. Our results indicate that at large healing rates hydraulic fractures are mobile, transporting fluid in intermittent pulses to the surface and displaying a 1/fα behavior. Low healing rates result in stable networks and constant flow. The efficiency of the fluid transport is independent from the closure dynamics of veins or fractures. More important than preexisting fracture networks is the distribution of fluid pressure. A key requirement for dynamic fracture networks is the presence of a fluid pressure gradient.

  7. Hydraulic fracturing with distinct element method

    NARCIS (Netherlands)

    Pruiksma, J.P.; Bezuijen, A.

    2002-01-01

    In this report, hydraulic fracturing is investigated using the distinct element code PFC2D from Itasca. Special routines were written to be able to model hydraulic fracturing. These include adding fluid flow to PFC2D and updating the fluid flow domains when fractures appear. A brief description of t

  8. Gravity-Driven Hydraulic Fractures

    Science.gov (United States)

    Germanovich, L. N.; Garagash, D.; Murdoch, L. C.; Robinowitz, M.

    2014-12-01

    This study is motived by a new method for disposing of nuclear waste by injecting it as a dense slurry into a hydraulic fracture that grows downward to great enough depth to permanently isolate the waste. Disposing of nuclear waste using gravity-driven hydraulic fractures is mechanically similar to the upward growth of dikes filled with low density magma. A fundamental question in both applications is how the injected fluid controls the propagation dynamics and fracture geometry (depth and breadth) in three dimensions. Analog experiments in gelatin [e.g., Heimpel and Olson, 1994; Taisne and Tait, 2009] show that fracture breadth (the short horizontal dimension) remains nearly stationary when the process in the fracture "head" (where breadth is controlled) is dominated by solid toughness, whereas viscous fluid dissipation is dominant in the fracture tail. We model propagation of the resulting gravity-driven (buoyant or sinking), finger-like fracture of stationary breadth with slowly varying opening along the crack length. The elastic response to fluid loading in a horizontal cross-section is local and can be treated similar to the classical Perkins-Kern-Nordgren (PKN) model of hydraulic fracturing. The propagation condition for a finger-like crack is based on balancing the global energy release rate due to a unit crack extension with the rock fracture toughness. It allows us to relate the net fluid pressure at the tip to the fracture breadth and rock toughness. Unlike the PKN fracture, where breadth is known a priori, the final breadth of a finger-like fracture is a result of processes in the fracture head. Because the head is much more open than the tail, viscous pressure drop in the head can be neglected leading to a 3D analog of Weertman's hydrostatic pulse. This requires relaxing the local elasticity assumption of the PKN model in the fracture head. As a result, we resolve the breadth, and then match the viscosity-dominated tail with the 3-D, toughness

  9. Hydraulic Fracture Stimulation Treatments at East Mesa, Well 58-30; Geothermal Reservoir Well Stimulation Program; Experiment 3 and 4

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-02-01

    The tests reported were part of the DOE Geothermal Reservoir Well Stimulation Program. This East Mesa (Imperial Valley, CA) well was successfully stimulated with two fracture treatments, a dendritic fracture and a planar fracture. The natural flow production of the well increased 114 percent, to 197,900 lb/hr. These tests were among the few successful attempts of this program to increase flow from geothermal production wells. The general belief is that these tests worked OK primarily because the formation was sedimentary rock (similar to rock in most oil and gas wells that have been stimulated successfully. Similar tests in geothermal hard rock reservoirs did not work very well. (DJE 2005)

  10. Dynamic Response in Transient Stress-Field Behavior Induced by Hydraulic Fracturing

    Science.gov (United States)

    Jenkins, Andrew

    Hydraulic fracturing is a technique which is used to exploit geologic features and subsurface properties in an effort to increase production in low-permeability formations. The process of hydraulic fracturing provides a greater surface contact area between the producing formation and the wellbore and thus increases the amount of recoverable hydrocarbons from within the reservoir. The use of this stimulation technique has brought on massive applause from the industry due to its widespread success and effectiveness, however the dynamic processes that take part in the development of hydraulic fractures is a relatively new area of research with respect to the massive scale operations that are seen today. The process of hydraulic fracturing relies upon understanding and exploiting the in-situ stress distribution throughout the area of study. These in-situ stress conditions are responsible for directing fracture orientation and propagation paths throughout the period of injection. The relative magnitude of these principle stresses is key in developing a successful stimulation plan. In horizontal well plan development the interpretation of stress within the reservoir is required for determining the azimuth of the horizontal well path. These horizontal laterals are typically oriented in a manner such that the well path lies parallel to the minimum horizontal stress. This allows for vertical fractures to develop transversely to the wellbore, or normal to the least principle stress without the theoretical possibility of fractures overlapping, creating the most efficient use of the fluid energy during injection. The orientation and magnitude of these in-situ stress fields however can be dynamic, controlled by the subsequent fracture propagation and redistribution of the surrounding stresses. That is, that as the fracture propagates throughout the reservoir, the relative stress fields surrounding the fractures may see a shift and deviate from their original direction or

  11. Subcritical growth of natural hydraulic fractures

    Science.gov (United States)

    Garagash, D.

    2014-12-01

    Joints are the most common example of brittle tensile failure in the crust. Their genesis at depth is linked to the natural hydraulic fracturing, which requires pore fluid pressure in excess of the minimum in situ stress [Pollard and Aidyn, JSG1988]. Depending on the geological setting, high pore pressure can result form burial compaction of interbedded strata, diagenesis, or tectonics. Common to these loading scenarios is slow build-up of pore pressure over a geological timescale, until conditions for initiation of crack growth are met on favorably oriented/sized flaws. The flaws can vary in size from grain-size cracks in igneous rocks to a fossil-size flaws in clastic rock, and once activated, are inferred to propagate mostly subcritically [Segall JGR 1984; Olson JGR 1993]. Despite many observational studies of natural hydraulic fractures, the modeling attempts appear to be few [Renshaw and Harvey JGR 1994]. Here, we use boundary integral formulation for the pore fluid inflow from the permeable rock into a propagating joint [Berchenko et al. IJRMMS 1997] coupled with the criteria for subcritical propagation assisted by the environmental effects of pore fluid at the crack tip to solve for the evolution of a penny-shape joint, which, in interbedded rock, may eventually evolve to short-blade geometry (propagation confined to a bed). Initial growth is exceedingly slow, paced by the stress corrosion reaction kinetics at the crack tip. During this stage the crack is fully-drained (i.e. the fluid pressure in the crack is equilibrated with the ambient pore pressure). This "slow" stage is followed by a rapid acceleration, driven by the increase of the mechanical stress intensity factor with the crack length, towards the terminal joint velocity. We provide an analytical expression for the latter as a function of the rock diffusivity, net pressure loading at the initiation (or flaw lengthscale), and parameters describing resistance to fracture growth. Due to a much slower

  12. Hydraulic fracturing chemicals and fluids technology

    CERN Document Server

    Fink, Johannes

    2013-01-01

    When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to class...

  13. Data Analytics of Hydraulic Fracturing Data

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jovan Yang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Viswanathan, Hari [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hyman, Jeffery [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Middleton, Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-11

    These are a set of slides on the data analytics of hydraulic fracturing data. The conclusions from this research are the following: they proposed a permeability evolution as a new mechanism to explain hydraulic fracturing trends; they created a model to include this mechanism and it showed promising results; the paper from this research is ready for submission; they devised a way to identify and sort refractures in order to study their effects, and this paper is currently being written.

  14. Effect of Natural Fractures on Hydraulic Fracturing

    Science.gov (United States)

    Ben, Y.; Wang, Y.; Shi, G.

    2012-12-01

    Hydraulic Fracturing has been used successfully in the oil and gas industry to enhance oil and gas production in the past few decades. Recent years have seen the great development of tight gas, coal bed methane and shale gas. Natural fractures are believed to play an important role in the hydraulic fracturing of such formations. Whether natural fractures can benefit the fracture propagation and enhance final production needs to be studied. Various methods have been used to study the effect of natural fractures on hydraulic fracturing. Discontinuous Deformation Analysis (DDA) is a numerical method which belongs to the family of discrete element methods. In this paper, DDA is coupled with a fluid pipe network model to simulate the pressure response in the formation during hydraulic fracturing. The focus is to study the effect of natural fractures on hydraulic fracturing. In particular, the effect of rock joint properties, joint orientations and rock properties on fracture initiation and propagation will be analyzed. The result shows that DDA is a promising tool to study such complex behavior of rocks. Finally, the advantages of disadvantages of our current model and future research directions will be discussed.

  15. Hydraulic fracture monitoring in hard rock at 410 m depth with an advanced fluid-injection protocol and extensive sensor array

    Science.gov (United States)

    Zang, Arno; Stephansson, Ove; Stenberg, Leif; Plenkers, Katrin; Specht, Sebastian; Milkereit, Claus; Schill, Eva; Kwiatek, Grzegorz; Dresen, Georg; Zimmermann, Günter; Dahm, Torsten; Weber, Michael

    2017-02-01

    In this paper, an underground experiment at the Äspö Hard Rock Laboratory (HRL) is described. Main goal is optimizing geothermal heat exchange in crystalline rock mass at depth by multistage hydraulic fracturing with minimal impact on the environment, that is, seismic events. For this, three arrays with acoustic emission, microseismicity and electromagnetic sensors are installed mapping hydraulic fracture initiation and growth. Fractures are driven by three different water injection schemes (continuous, progressive and pulse pressurization). After a brief review of hydraulic fracture operations in crystalline rock mass at mine scale, the site geology and the stress conditions at Äspö HRL are described. Then, the continuous, single-flow rate and alternative, multiple-flow rate fracture breakdown tests in a horizontal borehole at depth level 410 m are described together with the monitoring networks and sensitivity. Monitoring results include the primary catalogue of acoustic emission hypocentres obtained from four hydraulic fractures with the in situ trigger and localizing network. The continuous versus alternative water injection schemes are discussed in terms of the fracture breakdown pressure, the fracture pattern from impression packer result and the monitoring at the arrays. An example of multistage hydraulic fracturing with several phases of opening and closing of fracture walls is evaluated using data from acoustic emissions, seismic broad-band recordings and electromagnetic signal response. Based on our limited amount of in situ tests (six) and evaluation of three tests in Ävrö granodiorite, in the multiple-flow rate test with progressively increasing target pressure, the acoustic emission activity starts at a later stage in the fracturing process compared to the conventional fracturing case with continuous water injection. In tendency, also the total number and magnitude of acoustic events are found to be smaller in the progressive treatment with

  16. Hydraulic fracture monitoring in hard rock at 410 m depth with an advanced fluid-injection protocol and extensive sensor array

    Science.gov (United States)

    Zang, A.; Stephansson, O.; Stenberg, L.; Plenkers, K.; Specht, S.; Milkereit, C.; Schill, E.; Kwiatek, G.; Dresen, G.; Zimmermann, G.; Dahm, T.; Weber, M.

    2016-11-01

    In this article, an underground experiment at the Äspö Hard Rock Laboratory (HRL) is described. Main goal is optimizing geothermal heat exchange in crystalline rock mass at depth by multi-stage hydraulic fracturing with minimal impact on the environment, i.e. seismic events. For this, three arrays with acoustic emission, microseismicity and electromagnetic sensors are installed mapping hydraulic fracture initiation and growth. Fractures are driven by three different water injection schemes (continuous, progressive, pulse pressurization). After a brief review of hydraulic fracture operations in crystalline rock mass at mine scale, the site geology and the stress conditions at Äspö HRL are described. Then, the continuous, single-flow rate and alternative, multiple-flow rate fracture breakdown tests in a horizontal borehole at depth level 410 m are described together with the monitoring networks and sensitivity. Monitoring results include the primary catalogue of acoustic emission hypocenters obtained from four hydraulic fractures with the in situ trigger and localizing network. The continuous versus alternative water injection schemes are discussed in terms of the fracture breakdown pressure, the fracture pattern from impression packer result and the monitoring at the arrays. An example of multi-stage hydraulic fracturing with several phases of opening and closing of fracture walls is evaluated using data from acoustic emissions, seismic broadband recordings and electromagnetic signal response. Based on our limited amount of in situ tests (six) and evaluation of three tests in Ävrö granodiorite, in the multiple-flow rate test with progressively increasing target pressure, the acoustic emission activity starts at a later stage in the fracturing process compared to the conventional fracturing case with continuous water injection. In tendency, also the total number and magnitude of acoustic events is found to be smaller in the progressive treatment with frequent

  17. Aerobic biodegradation of organic compounds in hydraulic fracturing fluids.

    Science.gov (United States)

    Kekacs, Daniel; Drollette, Brian D; Brooker, Michael; Plata, Desiree L; Mouser, Paula J

    2015-07-01

    Little is known of the attenuation of chemical mixtures created for hydraulic fracturing within the natural environment. A synthetic hydraulic fracturing fluid was developed from disclosed industry formulas and produced for laboratory experiments using commercial additives in use by Marcellus shale field crews. The experiments employed an internationally accepted standard method (OECD 301A) to evaluate aerobic biodegradation potential of the fluid mixture by monitoring the removal of dissolved organic carbon (DOC) from an aqueous solution by activated sludge and lake water microbial consortia for two substrate concentrations and four salinities. Microbial degradation removed from 57 % to more than 90 % of added DOC within 6.5 days, with higher removal efficiency at more dilute concentrations and little difference in overall removal extent between sludge and lake microbe treatments. The alcohols isopropanol and octanol were degraded to levels below detection limits while the solvent acetone accumulated in biological treatments through time. Salinity concentrations of 40 g/L or more completely inhibited degradation during the first 6.5 days of incubation with the synthetic hydraulic fracturing fluid even though communities were pre-acclimated to salt. Initially diverse microbial communities became dominated by 16S rRNA sequences affiliated with Pseudomonas and other Pseudomonadaceae after incubation with the synthetic fracturing fluid, taxa which may be involved in acetone production. These data expand our understanding of constraints on the biodegradation potential of organic compounds in hydraulic fracturing fluids under aerobic conditions in the event that they are accidentally released to surface waters and shallow soils.

  18. Universal asymptotic umbrella for hydraulic fracture modeling

    CERN Document Server

    Linkov, Aleksandr M

    2014-01-01

    The paper presents universal asymptotic solution needed for efficient modeling of hydraulic fractures. We show that when neglecting the lag, there is universal asymptotic equation for the near-front opening. It appears that apart from the mechanical properties of fluid and rock, the asymptotic opening depends merely on the local speed of fracture propagation. This implies that, on one hand, the global problem is ill-posed, when trying to solve it as a boundary value problem under a fixed position of the front. On the other hand, when properly used, the universal asymptotics drastically facilitates solving hydraulic fracture problems (both analytically and numerically). We derive simple universal asymptotics and comment on their employment for efficient numerical simulation of hydraulic fractures, in particular, by well-established Level Set and Fast Marching Methods.

  19. A National Assessment of the Potential Impacts of Hydraulic Fracturing Activities on Drinking Water Resources

    Science.gov (United States)

    Ridley, C.; Burden, S.; Fleming, M. M.; Knightes, C. D.; Koplos, J.; LeDuc, S. D.; Ring, S.; Stanek, J.; Tuccillo, M. E.; Weaver, J.; Frithsen, J.

    2015-12-01

    The U.S. Environmental Protection Agency recently released a draft assessment of the potential impacts of hydraulic fracturing on drinking water resources. As part of the draft assessment, we reviewed, analyzed, and synthesized information from over 950 sources and concluded that there are above and below ground mechanisms by which hydraulic fracturing activities have the potential to impact drinking water resources. These mechanisms include: Water withdrawals in times of, or in areas with, low water availability; Spills of hydraulic fracturing fluids and produced water; Fracturing directly into underground drinking water resources; Below ground migration of liquids and gases; and Inadequate treatment and discharge of wastewater. Of the potential mechanisms identified in this report, we found specific instances where one or more mechanisms led to impacts on drinking water resources, including contamination of drinking water wells. The number of identified cases, however, was small compared to the number of hydraulically fractured wells. This finding could reflect a rarity of effects on drinking water resources, but may also be due to other limiting factors. These factors include: insufficient pre- and post-fracturing data on the quality of drinking water resources; the paucity of long-term systematic studies; the presence of other sources of contamination precluding a definitive link between hydraulic fracturing activities and an impact; and the inaccessibility of some information on hydraulic fracturing activities and potential impacts. Disclaimer: The views expressed are those of the authors and do not necessarily reflect the views or polices of the EPA.

  20. The EPA's Study on the Potential Impacts of Hydraulic Fracturing on Drinking Water Resources

    Science.gov (United States)

    Burden, Susan

    2013-03-01

    Natural gas plays a key role in our nation's clean energy future. The United States has vast reserves of natural gas that are commercially viable as a result of advances in horizontal drilling and hydraulic fracturing technologies, which enable greater access to gas in rock formations deep underground. These advances have spurred a significant increase in the production of both natural gas and oil across the country. However, as the use of hydraulic fracturing has increased, so have concerns about its potential human health and environmental impacts, especially for drinking water. In response to public concern, the US Congress requested that the US Environmental Protection Agency (EPA) conduct scientific research to examine the relationship between hydraulic fracturing and drinking water resources. In 2011, the EPA began research to assess the potential impacts of hydraulic fracturing on drinking water resources, if any, and to identify the driving factors that may affect the severity and frequency of such impacts. The study is organized around the five stages of the hydraulic fracturing water cycle, from water acquisition through the mixing of chemicals and the injection of fracturing fluid to post-fracturing treatment and/or disposal of wastewater. EPA scientists are using a transdisciplinary research approach involving laboratory studies, computer modeling, toxicity assessments, and case studies to answer research questions associated with each stage of the water cycle. This talk will provide an overview of the EPA's study, including a description of the hydraulic fracturing water cycle and a summary of the ongoing research projects.

  1. Self-potential observations during hydraulic fracturing

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Jeffrey R.; Glaser, Steven D.

    2007-09-13

    The self-potential (SP) response during hydraulic fracturing of intact Sierra granite was investigated in the laboratory. Excellent correlation of pressure drop and SP suggests that the SP response is created primarily by electrokinetic coupling. For low pressures, the variation of SP with pressure drop is linear, indicating a constant coupling coefficient (Cc) of -200 mV/MPa. However for pressure drops >2 MPa, the magnitude of the Cc increases by 80% in an exponential trend. This increasing Cc is related to increasing permeability at high pore pressures caused by dilatancy of micro-cracks, and is explained by a decrease in the hydraulic tortuosity. Resistivity measurements reveal a decrease of 2% prior to hydraulic fracturing and a decrease of {approx}35% after fracturing. An asymmetric spatial SP response created by injectate diffusion into dilatant zones is observed prior to hydraulic fracturing, and in most cases this SP variation revealed the impending crack geometry seconds before failure. At rupture, injectate rushes into the new fracture area where the zeta potential is different than in the rock porosity, and an anomalous SP spike is observed. After fracturing, the spatial SP distribution reveals the direction of fracture propagation. Finally, during tensile cracking in a point load device with no water flow, a SP spike is observed that is caused by contact electrification. However, the time constant of this event is much less than that for transients observed during hydraulic fracturing, suggesting that SP created solely from material fracture does not contribute to the SP response during hydraulic fracturing.

  2. Measuring the initial earth pressure of granite using hydraulic fracturing test; Goseong and Yuseong areas

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoung Yoon; Bae, Dae Seok; Kim, Chun Soo; Kim, Kyung Su; Koh, Young Kwon; Won, Kyung Sik [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-02-01

    This report provides the initial earth pressure of granitic rocks obtained from Deep Core Drilling Program which is carried out as part of the assessment of deep geological environmental condition. These data are obtained by hydraulic fracturing test in three boreholes drilled up to 350{approx}500 m depth at the Yuseong and Goseong sites. These sites were selected based on the result of preliminary site evaluation study. The boreholes are NX-size (76 mm) and vertical. The procedure of hydraulic fracturing test is as follows: - Selecting the testing positions by preliminary investigation using BHTV logging. - Performing the hydraulic fracturing test at each selected position with depth.- Estimating the shut-in pressure by the bilinear pressure-decay-rate method. - Estimating the fracture reopening pressure from the pressure-time curves.- Estimating the horizontal principal stresses and the direction of principal stresses. 65 refs., 39 figs., 12 tabs. (Author)

  3. Determining the spatial altitude of the hydraulic fractures.

    Science.gov (United States)

    Khamiev, Marsel; Kosarev, Victor; Goncharova, Galina

    2016-04-01

    Mathematical modeling and numerical simulation are the most widely used approaches for the solving geological problems. They imply software tools which are based on Monte Carlo method. The results of this project presents shows the possibility of using PNL tool to determine fracturing location. The modeled media is a homogeneous rock (limestone) cut by a vertical borehole (d=216 mm) with metal casing 9 mm thick. The cement sheath is 35 mm thick. The borehole is filled with fresh water. The rock mass is cut by crack, filled with a mixture of doped (gadolinium oxide Gd2O3) proppant (75%) and water (25%). A pulse neutron logging (PNL) tool is used for quality control in hydraulic fracturing operations. It includes a fast neutron source (so-called "neutron generator") and a set of thermal (or epithermal) neutron-sensing devices, forming the so-called near (ND) and far (FD) detectors. To evaluate neutron properties various segments (sectors) of the rock mass, the detector must register only neutrons that come from this very formation. It's possible if detecting block includes some (6 for example) thermal neutron detectors arranged circumferentially inside the tool. As a result we get few independent well logs, each accords with define rock sector. Afterwards synthetic logs processing we can determine spatial position of the hydraulic fracture.

  4. Partially decoupled modeling of hydraulic fracturing processes

    Energy Technology Data Exchange (ETDEWEB)

    Settari, A.; Puchyr, P.J.; Bachman, R.C. (Simtech Consulting Services, Calgary (CA))

    1990-02-01

    A new method of partial decoupling of the problem of modeling a hydraulic fracture in a reservoir is described. According to the authors this approach has significant advantages over previous methods with fully coupled or completely uncoupled models. Better accuracy can be achieved in modeling the fracture propagation, and the new system is very efficient and versatile. Virtually any reservoir model can be used for predicting postfracture productivity. Examples of single- and multiphase applications for modeling fractured wells are discussed.

  5. Anaerobic Biodegradation of Ethylene Glycol within Hydraulic Fracturing Fluid

    Science.gov (United States)

    Heyob, K. M.; Mouser, P. J.

    2014-12-01

    Ethylene glycol (EG) is a commonly used organic additive in hydraulic fracturing fluids used for shale gas recovery. Under aerobic conditions, this compound readily biodegrades to acetate and CO2 or is oxidized through the glycerate pathway. In the absence of oxygen, organisms within genera Desulfovibrio, Acetobacterium, and others can transform EG to acetaldehyde, a flammable and suspected carcinogenic compound. Acetaldehyde can then be enzymatically degraded to ethanol or acetate and CO2. However, little is known on how EG degrades in the presence of other organic additives, particularly under anaerobic conditions representative of deep groundwater aquifers. To better understand the fate and attenuation of glycols within hydraulic fracturing fluids we are assessing their biodegradation potential and pathways in batch anaerobic microcosm treatments. Crushed Berea sandstone was inoculated with groundwater and incubated with either EG or a synthetic fracturing fluid (SFF) containing EG formulations. We tracked changes in dissolved organic carbon (DOC), EG, and its transformation products over several months. Approximately 41% of bulk DOC in SFF is degraded within 21 days, with 58% DOC still remaining after 63 days. By comparison, this same SFF degrades by 70% within 25 days when inoculated with sediment-groundwater microbial communities, suggesting that bulk DOC degradation occurs at a slower rate and to a lesser extent with bedrock. Aerobic biodegradation of EG occurs rapidly (3-7 days); however anaerobic degradation of EG is much slower, requiring several weeks for substantial DOC loss to be observed. Ongoing experiments are tracking the degradation pathways of EG alone and in the presence of SFF, with preliminary data showing incomplete glycol transformation within the complex hydraulic fracturing fluid mixture. This research will help to elucidate rates, processes, and pathways for EG biodegradation and identify key microbial taxa involved in its degradation.

  6. Review of Hydraulic Fracturing for Preconditioning in Cave Mining

    Science.gov (United States)

    He, Q.; Suorineni, F. T.; Oh, J.

    2016-12-01

    Hydraulic fracturing has been used in cave mining for preconditioning the orebody following its successful application in the oil and gas industries. In this paper, the state of the art of hydraulic fracturing as a preconditioning method in cave mining is presented. Procedures are provided on how to implement prescribed hydraulic fracturing by which effective preconditioning can be realized in any in situ stress condition. Preconditioning is effective in cave mining when an additional fracture set is introduced into the rock mass. Previous studies on cave mining hydraulic fracturing focused on field applications, hydraulic fracture growth measurement and the interaction between hydraulic fractures and natural fractures. The review in this paper reveals that the orientation of the current cave mining hydraulic fractures is dictated by and is perpendicular to the minimum in situ stress orientation. In some geotechnical conditions, these orientation-uncontrollable hydraulic fractures have limited preconditioning efficiency because they do not necessarily result in reduced fragmentation sizes and a blocky orebody through the introduction of an additional fracture set. This implies that if the minimum in situ stress orientation is vertical and favors the creation of horizontal hydraulic fractures, in a rock mass that is already dominated by horizontal joints, no additional fracture set is added to that rock mass to increase its blockiness to enable it cave. Therefore, two approaches that have the potential to create orientation-controllable hydraulic fractures in cave mining with the potential to introduce additional fracture set as desired are proposed to fill this gap. These approaches take advantage of directional hydraulic fracturing and the stress shadow effect, which can re-orientate the hydraulic fracture propagation trajectory against its theoretical predicted direction. Proppants are suggested to be introduced into the cave mining industry to enhance the

  7. Simulations of hydraulic fracturing and leakage in sedimentary basins

    Energy Technology Data Exchange (ETDEWEB)

    Lothe, Ane Elisabeth

    2004-01-01

    Hydraulic fracturing and leakage of water through the caprock is described from sedimentary basin over geological time scale. Abnormal pressure accumulations reduce the effective stresses in the underground and trigger the initiation of hydraulic fractures. The major faults in the basin define these pressure compartments. In this Thesis, basin simulations of hydraulic fracturing and leakage have been carried out. A simulator (Pressim) is used to calculate pressure generation and dissipitation between the compartments. The flux between the compartments and not the flow within the compartments is modelled. The Griffith-Coulomb failure criterion determines initial failure at the top structures of overpressured compartments, whereas the frictional sliding criterion is used for reactivation along the same fractures. The minimum horizontal stress is determined from different formulas, and an empirical one seems to give good results compared to measured pressures and minimum horizontal stresses. Simulations have been carried out on two datasets; one covering the Halten Terrace area and one the Tune Field area in the northern North Sea. The timing of hydraulic fracturing and amount of leakage has been quantified in the studies from the Halten Terrace area. This is mainly controlled by the lateral fluid flow and the permeability of the major faults in the basin. Low fault permeability gives early failure, while high fault permeabilities results in no or late hydraulic fracturing and leakage from overpressured parts of the basin. In addition to varying the transmissibility of all faults in a basin, the transmissibility across individual faults can be varied. Increasing the transmissibility across faults is of major importance in overpressured to intermediately pressured areas. However, to obtain change in the flow, a certain pressure difference has to be the situation between the different compartments. The coefficient of internal friction and the coefficient of frictional

  8. Simulations of hydraulic fracturing and leakage in sedimentary basins

    Energy Technology Data Exchange (ETDEWEB)

    Lothe, Ane Elisabeth

    2004-01-01

    Hydraulic fracturing and leakage of water through the caprock is described from sedimentary basin over geological time scale. Abnormal pressure accumulations reduce the effective stresses in the underground and trigger the initiation of hydraulic fractures. The major faults in the basin define these pressure compartments. In this Thesis, basin simulations of hydraulic fracturing and leakage have been carried out. A simulator (Pressim) is used to calculate pressure generation and dissipitation between the compartments. The flux between the compartments and not the flow within the compartments is modelled. The Griffith-Coulomb failure criterion determines initial failure at the top structures of overpressured compartments, whereas the frictional sliding criterion is used for reactivation along the same fractures. The minimum horizontal stress is determined from different formulas, and an empirical one seems to give good results compared to measured pressures and minimum horizontal stresses. Simulations have been carried out on two datasets; one covering the Halten Terrace area and one the Tune Field area in the northern North Sea. The timing of hydraulic fracturing and amount of leakage has been quantified in the studies from the Halten Terrace area. This is mainly controlled by the lateral fluid flow and the permeability of the major faults in the basin. Low fault permeability gives early failure, while high fault permeabilities results in no or late hydraulic fracturing and leakage from overpressured parts of the basin. In addition to varying the transmissibility of all faults in a basin, the transmissibility across individual faults can be varied. Increasing the transmissibility across faults is of major importance in overpressured to intermediately pressured areas. However, to obtain change in the flow, a certain pressure difference has to be the situation between the different compartments. The coefficient of internal friction and the coefficient of frictional

  9. Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells and Multiple Hydraulic Fractures

    Energy Technology Data Exchange (ETDEWEB)

    Mike L. Laue

    1997-05-30

    The distal fan margin in the northeast portion of the Yowlumne field contains significant reserves but is not economical to develop using vertical wells. Numerous interbedded shales and deteriorating rock properties limit producibility. In addition, extreme depths (13,000 ft) present a challenging environment for hydraulic fracturing and artificial lift. Lastly, a mature waterflood increases risk because of the uncertainty with size and location of flood fronts. This project attempts to demonstrate the effectiveness of exploiting the distal fan margin of this slope-basin clastic reservoir through the use of a high-angle well completed with multiple hydraulic-fracture treatments. The combination of a high-angle (or horizontal) well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. The equivalent production rate and reserves of three vertical wells are anticipated at one-half to two-thirds the cost.

  10. Strategies for Creating Prescribed Hydraulic Fractures in Cave Mining

    Science.gov (United States)

    He, Q.; Suorineni, F. T.; Oh, J.

    2017-04-01

    The cave mining method was traditionally applied to massive low-grade, weak orebodies at shallow depths (less than 500 m) that favour cave propagation under gravity. Currently, this method is being applied to stronger orebodies and is taking place at depths of up to 2000 m below the surface. To ensure continuous cave propagation, preconditioning of the orebody is essential in this latter caving environment to improve rock mass caveability and to decrease fragmentation sizes. Hydraulic fracturing was initiated in the oil industry and is now being used in the cave mining industry as a preconditioning method and for stalled caves reactivation. A limitation of conventional hydraulic fracturing in the cave mining industry is that the hydraulic fracture orientation is uncontrollable and is dictated by the minimum in situ stress orientation. The preconditioning effectiveness of orientation-uncontrollable hydraulic fractures is limited in some geotechnical conditions, and the concept of creating orientation-controllable hydraulic fractures, here termed prescribed hydraulic fractures, is proposed to fill this gap. In this paper, the feasibility of the proposed approaches to creating prescribed hydraulic fractures is presented based on previous studies and numerical modelling. The numerical modelling code reliability in simulating the hydraulic fracture propagation and reorientation process was validated by comparing with laboratory results in the reported literature. In addition, the sensitivity of the prescribed hydraulic fracturing to the in situ stress condition and rock mass properties is examined.

  11. Micromechanical Aspects of Hydraulic Fracturing Processes

    Science.gov (United States)

    Galindo-torres, S. A.; Behraftar, S.; Scheuermann, A.; Li, L.; Williams, D.

    2014-12-01

    A micromechanical model is developed to simulate the hydraulic fracturing process. The model comprises two key components. Firstly, the solid matrix, assumed as a rock mass with pre-fabricated cracks, is represented by an array of bonded particles simulated by the Discrete Element Model (DEM)[1]. The interaction is ruled by the spheropolyhedra method, which was introduced by the authors previously and has been shown to realistically represent many of the features found in fracturing and communition processes. The second component is the fluid, which is modelled by the Lattice Boltzmann Method (LBM). It was recently coupled with the spheropolyhedra by the authors and validated. An advantage of this coupled LBM-DEM model is the control of many of the parameters of the fracturing fluid, such as its viscosity and the injection rate. To the best of the authors' knowledge this is the first application of such a coupled scheme for studying hydraulic fracturing[2]. In this first implementation, results are presented for a two-dimensional situation. Fig. 1 shows one snapshot of the LBM-DEM coupled simulation for the hydraulic fracturing where the elements with broken bonds can be identified and the fracture geometry quantified. The simulation involves a variation of the underground stress, particularly the difference between the two principal components of the stress tensor, to explore the effect on the fracture path. A second study focuses on the fluid viscosity to examine the effect of the time scales of different injection plans on the fracture geometry. The developed tool and the presented results have important implications for future studies of the hydraulic fracturing process and technology. references 1. Galindo-Torres, S.A., et al., Breaking processes in three-dimensional bonded granular materials with general shapes. Computer Physics Communications, 2012. 183(2): p. 266-277. 2. Galindo-Torres, S.A., A coupled Discrete Element Lattice Boltzmann Method for the

  12. Hydraulic Fracturing and Drinking Water Resources: Update on EPA Hydraulic Fracturing Study

    Science.gov (United States)

    Natural gas plays a key role in our nation's energy future and the process known as hydraulic fracturing (HF) is one way of accessing that resource. Over the past few years, several key technical, economic, and energy developments have spurred increased use of HF for gas extracti...

  13. Smart magnetic markers use in hydraulic fracturing.

    Science.gov (United States)

    Zawadzki, Jarosław; Bogacki, Jan

    2016-11-01

    One of the main challenges and unknowns during shale gas exploration is to assess the range and efficiency of hydraulic fracturing. It is also essential to assess the distribution of proppant, which keeps the fracture pathways open. Solving these problems may considerably increase the efficiency of the shale gas extraction. Because of that, the idea of smart magnetic marker, which can be detected when added to fracturing fluid, has been considered for a long time. This study provides overview of the possibilities of magnetic marker application for shale gas extraction. The imaging methods using electromagnetic markers, are considered or developed in two directions. The first possibility is the markers' electromagnetic activity throughout the whole volume of the fracturing fluid. Thus, it can be assumed that the whole fracturing fluid is the marker. Among these type of hydraulic fracturing solutions, ferrofluid could be considered. The second possibility is marker, which is just one of many components of the fracturing fluid. In this case feedstock magnetic materials, ferrites and nanomaterials could be considered. Magnetic properties of magnetite could be too low and ferrofluids' or nanomaterials' price is unacceptably high. Because of that, ferrites, especially ZnMn ferrites seems to be the best material for magnetic marker. Because of the numerous applications in electronics, it is cheap and easily available, although the price is higher, then that of magnetite. The disadvantage of using ferrite, could be too small mechanical strength. It creates an essential need for combining magnetic marker with proppant into magnetic-ceramic composite.

  14. Hydraulic fracture model comparison study: Complete results

    Energy Technology Data Exchange (ETDEWEB)

    Warpinski, N.R. [Sandia National Labs., Albuquerque, NM (United States); Abou-Sayed, I.S. [Mobil Exploration and Production Services (United States); Moschovidis, Z. [Amoco Production Co. (US); Parker, C. [CONOCO (US)

    1993-02-01

    Large quantities of natural gas exist in low permeability reservoirs throughout the US. Characteristics of these reservoirs, however, make production difficult and often economic and stimulation is required. Because of the diversity of application, hydraulic fracture design models must be able to account for widely varying rock properties, reservoir properties, in situ stresses, fracturing fluids, and proppant loads. As a result, fracture simulation has emerged as a highly complex endeavor that must be able to describe many different physical processes. The objective of this study was to develop a comparative study of hydraulic-fracture simulators in order to provide stimulation engineers with the necessary information to make rational decisions on the type of models most suited for their needs. This report compares the fracture modeling results of twelve different simulators, some of them run in different modes for eight separate design cases. Comparisons of length, width, height, net pressure, maximum width at the wellbore, average width at the wellbore, and average width in the fracture have been made, both for the final geometry and as a function of time. For the models in this study, differences in fracture length, height and width are often greater than a factor of two. In addition, several comparisons of the same model with different options show a large variability in model output depending upon the options chosen. Two comparisons were made of the same model run by different companies; in both cases the agreement was good. 41 refs., 54 figs., 83 tabs.

  15. FEASIBILITY OF HYDRAULIC FRACTURING OF SOILS TO IMPROVE REMEDIAL ACTIONS

    Science.gov (United States)

    Hydraulic fracturing, a technique commonly used to increase the yields of oil wells, could improve the effectiveness of several methods of in situ remediation. This project consisted of laboratory and field tests in which hydraulic fractures were created in soil. Laboratory te...

  16. Induced seismicity caused by hydraulic fracturing in deep geothermal wells in Germany and adjacent areas

    Science.gov (United States)

    Plenefisch, Thomas; Brückner, Lisa; Ceranna, Lars; Gestermann, Nicolai; Houben, Georg; Tischner, Torsten; Wegler, Ulrich; Wellbrink, Matthias; Bönnemann, Christian; Bertram, Andreas; Kirschbaum, Bernd

    2016-04-01

    Recently, the BGR has worked out a study on the potential environmental impact caused by hydraulic fracturing or chemical stimulations in deep geothermal reservoirs in Germany and adjacent areas. The investigations and analyses are based on existing studies and information provided by operators. The two environmental impacts being essentially considered in the report are induced seismicity and possible contamination of the groundwater reservoirs which serve for drinking water supply. Altogether, in this study, information on 30 hydraulic frac operations and 26 chemical stimulations including information from neighboring countries were compiled and analyzed. Out of the hydraulic stimulations two thirds were carried out as waterfracs and one third as fracturing with proppants. Parameters used in the study to characterize the induced seismicity are maximum magnitude, number of seismic events, size of the seismically active volume, and the relation of this volume to fault zones and the cap rock, as well as, finally, the impacts at the Earth's surface. The response of the subsurface to hydraulic fracturing is variable: There are some activities, which cause perceptible seismic events, others, where no perceptible but instrumentally detected events occurred, and moreover activities without even any instrumentally detected events. A classification of seismic hazard with respect to tectonic region, geology, or depth of the layer is still difficult, since the number of hydraulic fracturing measures in deep geothermal wells is small making a statistically sound analysis impossible. However, there are some indications, that hydraulic fracturing in granite in tectonically active regions like the Upper Rhine Graben results in comparatively stronger, perceptible seismicity compared to hydraulic fracturing in the sedimentary rocks of the North German basin. The maximum magnitudes of induced earthquakes caused by hydraulic fracturing of deep geothermal wells in Germany are

  17. COHESIVE ZONE FINITE ELEMENT-BASED MODELING OF HYDRAULIC FRACTURES

    Institute of Scientific and Technical Information of China (English)

    Zuorong Chen; A.P. Bunger; Xi Zhang; Robert G. Jeffrey

    2009-01-01

    Hydraulic fracturing is a powerful technology used to stimulate fluid production from reservoirs. The fully 3-D numerical simulation of the hydraulic fracturing process is of great importance to the efficient application of this technology, but is also a great challenge because of the strong nonlinear coupling between the viscous flow of fluid and fracture propagation. By taking advantage of a cohesive zone method to simulate the fracture process, a finite element model based on the existing pore pressure cohesive finite elements has been established to investigate the propagation of a penny-shaped hydraulic fracture in an infinite elastic medium. The effect of cohesive material parameters and fluid viscosity on the hydraulic fracture behaviour has been investigated. Excellent agreement between the finite element results and analytical solutions for the limiting case where the fracture process is dominated by rock fracture toughness demonstrates the ability of the cohesive zone finite element model in simulating the hydraulic fracture growth for this case.

  18. Disclosure of hydraulic fracturing fluid chemical additives: analysis of regulations.

    Science.gov (United States)

    Maule, Alexis L; Makey, Colleen M; Benson, Eugene B; Burrows, Isaac J; Scammell, Madeleine K

    2013-01-01

    Hydraulic fracturing is used to extract natural gas from shale formations. The process involves injecting into the ground fracturing fluids that contain thousands of gallons of chemical additives. Companies are not mandated by federal regulations to disclose the identities or quantities of chemicals used during hydraulic fracturing operations on private or public lands. States have begun to regulate hydraulic fracturing fluids by mandating chemical disclosure. These laws have shortcomings including nondisclosure of proprietary or "trade secret" mixtures, insufficient penalties for reporting inaccurate or incomplete information, and timelines that allow for after-the-fact reporting. These limitations leave lawmakers, regulators, public safety officers, and the public uninformed and ill-prepared to anticipate and respond to possible environmental and human health hazards associated with hydraulic fracturing fluids. We explore hydraulic fracturing exemptions from federal regulations, as well as current and future efforts to mandate chemical disclosure at the federal and state level.

  19. Optimization of Multiple Hydraulically Fractured Horizontal Wells in Unconventional Gas Reservoirs

    Directory of Open Access Journals (Sweden)

    Wei Yu

    2013-01-01

    Full Text Available Accurate placement of multiple horizontal wells drilled from the same well pad plays a critical role in the successful economical production from unconventional gas reservoirs. However, there are high cost and uncertainty due to many inestimable and uncertain parameters such as reservoir permeability, porosity, fracture spacing, fracture half-length, fracture conductivity, gas desorption, and well spacing. In this paper, we employ response surface methodology to optimize multiple horizontal well placement to maximize Net Present Value (NPV with numerically modeling multistage hydraulic fractures in combination with economic analysis. This paper demonstrates the accuracy of numerical modeling of multistage hydraulic fractures for actual Barnett Shale production data by considering the gas desorption effect. Six uncertain parameters, such as permeability, porosity, fracture spacing, fracture half-length, fracture conductivity, and distance between two neighboring wells with a reasonable range based on Barnett Shale information, are used to fit a response surface of NPV as the objective function and to finally identify the optimum design under conditions of different gas prices based on NPV maximization. This integrated approach can contribute to obtaining the optimal drainage area around the wells by optimizing well placement and hydraulic fracturing treatment design and provide insight into hydraulic fracture interference between single well and neighboring wells.

  20. Characterization of the Oriskany and Berea Sandstones: Evaluating Biogeochemical Reactions of Potential Sandstone–Hydraulic Fracturing Fluid Interaction

    Energy Technology Data Exchange (ETDEWEB)

    Verba, Circe [National Energy Technology Lab. (NETL), Albany, OR (United States); Harris, Aubrey [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2016-07-07

    The Marcellus shale, located in the mid-Atlantic Appalachian Basin, has been identified as a source for natural gas and targeted for hydraulic fracturing recovery methods. Hydraulic fracturing is a technique used by the oil and gas industry to access petroleum reserves in geologic formations that cannot be accessed with conventional drilling techniques (Capo et al., 2014). This unconventional technique fractures rock formations that have low permeability by pumping pressurized hydraulic fracturing fluids into the subsurface. Although the major components of hydraulic fracturing fluid are water and sand, chemicals, such as recalcitrant biocides and polyacrylamide, are also used (Frac Focus, 2015). There is domestic concern that the chemicals could reach groundwater or surface water during transport, storage, or the fracturing process (Chapman et al., 2012). In the event of a surface spill, understanding the natural attenuation of the chemicals in hydraulic fracturing fluid, as well as the physical and chemical properties of the aquifers surrounding the spill site, will help mitigate potential dangers to drinking water. However, reports on the degradation pathways of these chemicals are limited in existing literature. The Appalachian Basin Marcellus shale and its surrounding sandstones host diverse mineralogical suites. During the hydraulic fracturing process, the hydraulic fracturing fluids come into contact with variable mineral compositions. The reactions between the fracturing fluid chemicals and the minerals are very diverse. This report: 1) describes common minerals (e.g. quartz, clay, pyrite, and carbonates) present in the Marcellus shale, as well as the Oriskany and Berea sandstones, which are located stratigraphically below and above the Marcellus shale; 2) summarizes the existing literature of the degradation pathways for common hydraulic fracturing fluid chemicals [polyacrylamide, ethylene glycol, poly(diallyldimethylammonium chloride), glutaraldehyde

  1. A nonlocal model for fluid-structure interaction with applications in hydraulic fracturing

    CERN Document Server

    Turner, Daniel Z

    2012-01-01

    Modeling important engineering problems related to flow-induced damage (in the context of hydraulic fracturing among others) depends critically on characterizing the interaction of porous media and interstitial fluid flow. This work presents a new formulation for incorporating the effects of pore pressure in a nonlocal representation of solid mechanics. The result is a framework for modeling fluid-structure interaction problems with the discontinuity capturing advantages of an integral based formulation. A number of numerical examples are used to show that the proposed formulation can be applied to measure the effect of leak-off during hydraulic fracturing as well as modeling consolidation of fluid saturated rock and surface subsidence caused by fluid extraction from a geologic reservoir. The formulation incorporates the effect of pore pressure in the constitutive description of the porous material in a way that is appropriate for nonlinear materials, easily implemented in existing codes, straightforward in i...

  2. Hydraulic Fracturing, Wastewater Injection and Unintended Earthquakes (Invited)

    Science.gov (United States)

    Ellsworth, W. L.

    2013-12-01

    pressure through conductive fractures or faults. In contrast with hydraulic fracturing treatments, wastewater wells commonly inject fluid for years or decades, with cumulative volumes occasionally in excess of 1 million cubic meters. By design, wastewater injection should never induce hydraulic fractures, as regulations require injection pressures to be less than the fracture pressure. Avoiding earthquakes has proven to be more problematic, at least for a small percentage of the more than 30,000 UIC Class II wells in the U.S. that are licensed for wastewater disposal. Case studies of some of the larger of the recent earthquakes induced by wastewater injection suggest triggering by transmission of the pore pressure increase to well-oriented faults in the basement. Ultimately, better knowledge of the stress and pressure conditions at depth; the hydrogeologic framework, including the presence and geometry of faults; and the location and mechanisms of natural seismicity at a few sites will be needed to develop a predictive understanding of the hazard posed by induced earthquakes.

  3. The Potential Impacts of Hydraulic Fracturing on Agriculture

    National Research Council Canada - National Science Library

    Beng Ong

    2014-01-01

    Hydraulic fracturing (or “fracking”) is a method of extracting oil and natural gas trapped in deep rock layers underground by pumping water, sand, and other chemicals/additives at high pressures into a well drilled vertically...

  4. Investigation of possible wellbore cement failures during hydraulic fracturing operations

    Science.gov (United States)

    Researchers used the peer-reviewed TOUGH+ geomechanics computational software and simulation system to investigate the possibility of fractures and shear failure along vertical wells during hydraulic fracturing operations.

  5. Hydraulic Fracturing: Paving the Way for a Sustainable Future?

    OpenAIRE

    Jiangang Chen; Al-Wadei, Mohammed H.; Kennedy, Rebekah C. M.; Terry, Paul D.

    2014-01-01

    With the introduction of hydraulic fracturing technology, the United States has become the largest natural gas producer in the world with a substantial portion of the production coming from shale plays. In this review, we examined current hydraulic fracturing literature including associated wastewater management on quantity and quality of groundwater. We conclude that proper documentation/reporting systems for wastewater discharge and spills need to be enforced at the federal, state, and indu...

  6. Hydraulic fracturing - an attempt of DEM simulation

    Science.gov (United States)

    Kosmala, Alicja; Foltyn, Natalia; Klejment, Piotr; Dębski, Wojciech

    2017-04-01

    Hydraulic fracturing is a technique widely used in oil, gas and unconventional reservoirs exploitation in order to enable the oil/gas to flow more easily and enhance the production. It relays on pumping into a rock a special fluid under a high pressure which creates a set of microcracks which enhance porosity of the reservoir rock. In this research, attempt of simulation of such hydrofracturing process using the Discrete Element Method approach is presented. The basic assumption of this approach is that the rock can be represented as an assembly of discrete particles cemented into a rigid sample (Potyondy 2004). An existence of voids among particles simulates then a pore system which can be filled out by fracturing fluid, numerically represented by much smaller particles. Following this microscopic point of view and its numerical representation by DEM method we present primary results of numerical analysis of hydrofracturing phenomena, using the ESyS-Particle Software. In particular, we consider what is happening in distinct vicinity of the border between rock sample and fracking particles, how cracks are creating and evolving by breaking bonds between particles, how acoustic/seismic energy is releasing and so on. D.O. Potyondy, P.A. Cundall. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 41 (2004), pp. 1329-1364.

  7. Studies investigate effects of hydraulic fracturing

    Science.gov (United States)

    Balcerak, Ernie

    2012-11-01

    The use of hydraulic fracturing, also known as fracking, to enhance the retrieval of natural gas from shale has been increasing dramatically—the number of natural gas wells rose about 50% since 2000. Shale gas has been hailed as a relatively low-cost, abundant energy source that is cleaner than coal. However, fracking involves injecting large volumes of water, sand, and chemicals into deep shale gas reservoirs under high pressure to open fractures through which the gas can travel, and the process has generated much controversy. The popular press, advocacy organizations, and the documentary film Gasland by Josh Fox have helped bring this issue to a broad audience. Many have suggested that fracking has resulted in contaminated drinking water supplies, enhanced seismic activity, demands for large quantities of water that compete with other uses, and challenges in managing large volumes of resulting wastewater. As demand for expanded domestic energy production intensifies, there is potential for substantially increased use of fracking together with other recovery techniques for "unconventional gas resources," like extended horizontal drilling.

  8. Hydraulic fracturing in granite under geothermal conditions

    Science.gov (United States)

    Solberg, P.; Lockner, D.; Byerlee, J.D.

    1980-01-01

    The experimental hydraulic fracturing of granite under geothermal conditions produces tensile fracture at rapid fluid injection rates and shear fracture at slow injection rates and elevated differential stress levels. A sudden burst of acoustic emission activity accompanies tensile fracture formation whereas the acoustic emission rate increases exponentially prior to shear fracture. Temperature does not significantly affect the failure mechanism, and the experimental results have not demonstrated the occurrence of thermal fracturing. A critical result of these experiments is that fluid injection at intermediate rates and elevated differential stress levels increases permeability by more than an order of magnitude without producing macroscopic fractures, and low-level acoustic emission activity occurs simultaneously near the borehole and propagates outward into the specimen with time. Permeability measurements conducted at atmospheric pressure both before and after these experiments show that increased permeability is produced by permanent structural changes in the rock. Although results of this study have not demonstrated the occurrence of thermal fracturing, they suggest that fluid injection at certain rates in situ may markedly increase local permeability. This could prove critical to increasing the efficiency of heat exchange for geothermal energy extraction from hot dry rock. ?? 1980.

  9. The risk of hydraulic fracturing on public health in the UK and the UK's fracking legislation.

    Science.gov (United States)

    Reap, Elisabeth

    2015-01-01

    Hydraulic fracturing to extract natural gas from shale rock is a new, rapidly expanding industry in the United States (US). However, there is concern that these operations could be having large negative impacts such as groundwater contamination, increased air pollution and seismic events. The United Kingdom (UK) is looking at the potential for emulating the success of 'shale gas' in the US. Differences in population density and geological conditions mean that the public health impacts recorded in the US cannot be directly extrapolated to the UK. There is limited academic literature available but findings suggest that the UK government is not fully recognising the inherent risks of hydraulic fracturing exposed by this literature. Government reports suggest a reliance on engineering solutions and better practice to overcome problems found in the US when evidence suggests that there are inherent risks and impacts that cannot be eliminated. This study applies US results to approximate the impact of one exposure pathway, inhalation of hydrocarbons by the public from operational air emissions over the 30 year lifetime of a well and finds that 7.2 extra cancer cases from exposure to air contamination would be expected in the UK if all test sites, approved test sites and test sites awaiting approval as of January 2015 went on to extract gas. In conclusion, limited assessment of the public health implications of hydraulic fracturing operations is available but the UK government appears to not be applying the precautionary principle to potentially significant legislation.

  10. Numerical Study of Critical Role of Rock Heterogeneity in Hydraulic Fracture Propagation

    Energy Technology Data Exchange (ETDEWEB)

    J. Zhou; H. Huang; M. Deo

    2016-03-01

    Log and seismic data indicate that most shale formations have strong heterogeneity. Conventional analytical and semi-analytical fracture models are not enough to simulate the complex fracture propagation in these highly heterogeneous formation. Without considering the intrinsic heterogeneity, predicted morphology of hydraulic fracture may be biased and misleading in optimizing the completion strategy. In this paper, a fully coupling fluid flow and geomechanics hydraulic fracture simulator based on dual-lattice Discrete Element Method (DEM) is used to predict the hydraulic fracture propagation in heterogeneous reservoir. The heterogeneity of rock is simulated by assigning different material force constant and critical strain to different particles and is adjusted by conditioning to the measured data and observed geological features. Based on proposed model, the effects of heterogeneity at different scale on micromechanical behavior and induced macroscopic fractures are examined. From the numerical results, the microcrack will be more inclined to form at the grain weaker interface. The conventional simulator with homogeneous assumption is not applicable for highly heterogeneous shale formation.

  11. Primary factors governing hydraulic fractures in heterogeneous stratified porous formations

    Energy Technology Data Exchange (ETDEWEB)

    Cleary, M.P.

    1978-08-24

    Some primary material, macrostructural and tectonic features of typical geological formations are identified, insofar as they affect the hydraulic fracturing operation whereby suitably treated fluid is pumped into massive crack(s) underground: the retardation or channeling due to strata interfaces, discontinuities and other heterogeneities is roughly characterized, in the context of fully three-dimensional crack shape evolution, and the initiation from oriented boreholes is discussed in detail. A general-purpose numerical scheme is described, efficiently based on a physically transparent distribution of discontinuity multipoles (or dislocations) and the solution of resulting singular integral equations, which permits precise quantification of these effects: in particular, the barriers provided by adjacent stiffer and tougher strata are properly rationalized and the roles of inelastic slippage, blunting, branching, arrest, and re-initiation are placed in more transparent perspective. Stabilization effects due to alterations of pore-fluid pressure (and hence effective decohering stress), or the flux of formation fluid into the open region near to the crack tip, are described as potentially unfavorable for hydrofrac containment. However, the dominant time-dependent mechanism of frac fluid penetration into the narrow crack aperture attracts most attention: this process is very naturally and tractably incorporated in our comprehensive numerical formulation so that realistic simulation of actual field operations should be feasible in the near future.

  12. Discrete modeling of hydraulic fracturing processes in a complex pre-existing fracture network

    Science.gov (United States)

    Kim, K.; Rutqvist, J.; Nakagawa, S.; Houseworth, J. E.; Birkholzer, J. T.

    2015-12-01

    Hydraulic fracturing and stimulation of fracture networks are widely used by the energy industry (e.g., shale gas extraction, enhanced geothermal systems) to increase permeability of geological formations. Numerous analytical and numerical models have been developed to help understand and predict the behavior of hydraulically induced fractures. However, many existing models assume simple fracturing scenarios with highly idealized fracture geometries (e.g., propagation of a single fracture with assumed shapes in a homogeneous medium). Modeling hydraulic fracture propagation in the presence of natural fractures and homogeneities can be very challenging because of the complex interactions between fluid, rock matrix, and rock interfaces, as well as the interactions between propagating fractures and pre-existing natural fractures. In this study, the TOUGH-RBSN code for coupled hydro-mechanical modeling is utilized to simulate hydraulic fracture propagation and its interaction with pre-existing fracture networks. The simulation tool combines TOUGH2, a simulator of subsurface multiphase flow and mass transport based on the finite volume approach, with the implementation of a lattice modeling approach for geomechanical and fracture-damage behavior, named Rigid-Body-Spring Network (RBSN). The discrete fracture network (DFN) approach is facilitated in the Voronoi discretization via a fully automated modeling procedure. The numerical program is verified through a simple simulation for single fracture propagation, in which the resulting fracture geometry is compared to an analytical solution for given fracture length and aperture. Subsequently, predictive simulations are conducted for planned laboratory experiments using rock-analogue (soda-lime glass) samples containing a designed, pre-existing fracture network. The results of a preliminary simulation demonstrate selective fracturing and fluid infiltration along the pre-existing fractures, with additional fracturing in part

  13. Overview of microseismic monitoring of hydraulic fracturing for unconventional oil and gas plays

    Science.gov (United States)

    Shemeta, J. E.

    2011-12-01

    The exponential growth of unconventional resources for oil and gas production has been driven by the use of horizontal drilling and hydraulic fracturing. These drilling and completion methods increase the contact area of the low permeability and porosity hydrocarbon bearing formations and allow for economic production in what was previously considered uncommercial rock. These new resource plays have sparked an enormous interest in microseismic monitoring of hydraulic fracture treatments. As a hydraulic fracture is pumped, microseismic events are emitted in a volume of rock surrounding the stimulated fracture. The goal of the monitoring is to identify and locate the microseismic events to a high degree of precision and to map the position of the induced hydraulic fracture in time and space. The microseismic events are very small, typically having a moment-magnitude range of -4 to 0. The microseismic data are collected using a variety of seismic array designs and instrumentation, including borehole, shallow borehole, near-surface and surface arrays, using either of three-component clamped 15 Hz borehole sondes to simple vertical 10 Hz geophones for surface monitoring. The collection and processing of these data is currently under rapid technical development. Each monitoring method has technical challenges which include accurate velocity modeling, correct seismic phase identification and signal to noise issues. The microseismic locations are used to guide hydrocarbon exploration and production companies in crucial reservoir development decisions such as the direction to drill the horizontal well bores and the appropriate inter-well spacing between horizontal wells to optimally drain the resource. The fracture mapping is also used to guide fracture and reservoir engineers in designing and calibrating the fluid volumes and types, injection rates and pressures for the hydraulic fracture treatments. The microseismic data can be located and mapped in near real-time during

  14. Controlled Source Electromagnetic Monitoring of Hydraulic Fracturing

    Science.gov (United States)

    Couchman, M. J.; Everett, M. E.

    2016-12-01

    Controlled Source Electromagnetics (CSEM) have been used as a direct hydrocarbon indicator since the 1960s, with a resurgence in marine conventional settings in the new millennium, with many studies revolving around detecting a thin resistive layer such as a reservoir at 1m-3km depth. The presence of the resistive layer is characterized by a jump in electric field amplitude recorded at the boundary between the layer and the host sediments. Here the lessons learned from these studies are applied to terrestrial unconventional settings. However, unlike in marine settings where resistive hydrocarbon-charged fluids comprise a conventional reservoir, on land we are interested in electrically conductive injected fluids. The work shown here is a means to develop further methods to enable more reliable terrestrial CSEM monitoring of the flow of injected fluids associated with hydraulic fracturing of unconventional reservoirs and to detect subsurface fluids based on their CSEM signature and in turn, to infer the subsurface flow of electrically conductive injected fluids. Overall this project attempts to create more efficient fracturing, by determining fluid pathways, hence making projects more cost effective by reducing the cost of extraction. The predictive model developed focuses on the mapping of fluid flow in from a horizontal pipe in a uniform halfspace using a long in-line Horizontal Electric Dipole (HED) with electric field amplitude recorded by an array of electric field sensors. The code provided has been edited to include a long-dipole source in addition to the half dipole source originally in place in order to align with current CSEM field practices. The well casing has also been included due to its large effect on CSEM response.

  15. Electrical and Magnetic Imaging of Proppants in Shallow Hydraulic Fractures

    Science.gov (United States)

    Denison, J. L. S.; Murdoch, L. C.; LaBrecque, D. J.; Slack, W. W.

    2015-12-01

    Hydraulic fracturing is an important tool to increase the productivity of wells used for oil and gas production, water resources, and environmental remediation. Currently there are relatively few tools available to monitor the distribution of proppants within a hydraulic fracture, or the propagation of the fracture itself. We have been developing techniques for monitoring hydraulic fractures by injecting electrically conductive, dielectric, or magnetically permeable proppants. We then use the resulting contrast with the enveloping rock to image the proppants using geophysical methods. Based on coupled laboratory and numerical modeling studies, three types of proppants were selected for field evaluation. Eight hydraulic fractures were created near Clemson, SC in May of 2015 by injecting specialized proppants at a depth of 1.5 m. The injections created shallow sub-horizontal fractures extending several meters from the injection point.Each cell had a dense array of electrodes and magnetic sensors on the surface and four shallow vertical electrode arrays that were used to obtain data before and after hydraulic fracturing. Net vertical displacement and transient tilts were also measured. Cores from 130 boreholes were used to characterize the general geometries, and trenching was used to characterize the forms of two of the fractures in detail. Hydraulic fracture geometries were estimated by inverting pre- and post-injection geophysical data. Data from cores and trenching show that the hydraulic fractures were saucer-shaped with a preferred propagation direction. The geophysical inversions generated images that were remarkably similar in form, size, and location to the ground truth from direct observation. Displacement and tilt data appear promising as a constraint on fracture geometry.

  16. Hydraulic Fracturing: Paving the Way for a Sustainable Future?

    Directory of Open Access Journals (Sweden)

    Jiangang Chen

    2014-01-01

    Full Text Available With the introduction of hydraulic fracturing technology, the United States has become the largest natural gas producer in the world with a substantial portion of the production coming from shale plays. In this review, we examined current hydraulic fracturing literature including associated wastewater management on quantity and quality of groundwater. We conclude that proper documentation/reporting systems for wastewater discharge and spills need to be enforced at the federal, state, and industrial level. Furthermore, Underground Injection Control (UIC requirements under SDWA should be extended to hydraulic fracturing operations regardless if diesel fuel is used as a fracturing fluid or not. One of the biggest barriers that hinder the advancement of our knowledge on the hydraulic fracturing process is the lack of transparency of chemicals used in the practice. Federal laws mandating hydraulic companies to disclose fracturing fluid composition and concentration not only to federal and state regulatory agencies but also to health care professionals would encourage this practice. The full disclosure of fracturing chemicals will allow future research to fill knowledge gaps for a better understanding of the impacts of hydraulic fracturing on human health and the environment.

  17. Hydraulic fracturing: paving the way for a sustainable future?

    Science.gov (United States)

    Chen, Jiangang; Al-Wadei, Mohammed H; Kennedy, Rebekah C M; Terry, Paul D

    2014-01-01

    With the introduction of hydraulic fracturing technology, the United States has become the largest natural gas producer in the world with a substantial portion of the production coming from shale plays. In this review, we examined current hydraulic fracturing literature including associated wastewater management on quantity and quality of groundwater. We conclude that proper documentation/reporting systems for wastewater discharge and spills need to be enforced at the federal, state, and industrial level. Furthermore, Underground Injection Control (UIC) requirements under SDWA should be extended to hydraulic fracturing operations regardless if diesel fuel is used as a fracturing fluid or not. One of the biggest barriers that hinder the advancement of our knowledge on the hydraulic fracturing process is the lack of transparency of chemicals used in the practice. Federal laws mandating hydraulic companies to disclose fracturing fluid composition and concentration not only to federal and state regulatory agencies but also to health care professionals would encourage this practice. The full disclosure of fracturing chemicals will allow future research to fill knowledge gaps for a better understanding of the impacts of hydraulic fracturing on human health and the environment.

  18. Veining Failure and Hydraulic Fracturing in Shales

    Science.gov (United States)

    Mighani, S.; Sondergeld, C. H.; Rai, C. S.

    2014-12-01

    During the hydraulic fracturing, the pressurized fluid creates new fractures and reactivates existing natural fractures forming a highly conductive Stimulated Reservoir Volume (SRV) around the borehole. We extend the previous work on Lyons sandstone and pyrophyllite to anisotropic shale from the Wolfcamp formation. We divide the rock anisotropy into two groups: a) conventional and b) unconventional (shaly) anisotropy. X-ray Computed Tomography (CT), compressional velocity anisotropy, and SEM analysis are used to identify three causes of anisotropy: bedding planes, clay lamination, and calcite veins. Calcite vein is a subsequently filled with calcite bonded weakly to the matrix. Velocity anisotropy and visual observations demonstrate the calcite filled veins to be mostly subparallel to the fabric direction. Brazilian tests are carried out to observe the fracture initiation and propagation under tension. High speed photography (frame rate 300,000 frame/sec) was used to capture the failure. Strain gauges and Acoustic Emission (AE) sensors recorded the deformation leading up to and during failure. SEM imaging and surface profilometry were employed to study the post-failure fracture system and failed surface topology. Fracture permeability was measured as a function of effective stress. Brazilian tests on small disks containing a centered single vein revealed the shear strength of the veins. We interpret the strain data and number, frequency, and amplitude of AE events which are correlated well with the observed fracture process zone, surface roughness, and permeability. The unpropped fracture has enhanced permeability by two orders of magnitude. The observed anisotropic tensile failure seems to have a universal trend with a minimum strength occurring at 15o orientation with respect to the loading axis. The veins at 15o orientation with respect to the loading axis were easily activated at 30% of the original failure load. The measured strength of the vein is as low as 6

  19. Selective oxidation of bromide in wastewater brines from hydraulic fracturing.

    Science.gov (United States)

    Sun, Mei; Lowry, Gregory V; Gregory, Kelvin B

    2013-07-01

    Brines generated from oil and natural gas production, including flowback water and produced water from hydraulic fracturing of shale gas, may contain elevated concentrations of bromide (~1 g/L). Bromide is a broad concern due to the potential for forming brominated disinfection byproducts (DBPs) during drinking water treatment. Conventional treatment processes for bromide removal is costly and not specific. Selective bromide removal is technically challenging due to the presence of other ions in the brine, especially chloride as high as 30-200 g/L. This study evaluates the ability of solid graphite electrodes to selectively oxidize bromide to bromine in flowback water and produced water from a shale gas operation in Southwestern PA. The bromine can then be outgassed from the solution and recovered, as a process well understood in the bromine industry. This study revealed that bromide may be selectively and rapidly removed from oil and gas brines (~10 h(-1) m(-2) for produced water and ~60 h(-1) m(-2) for flowback water). The electrolysis occurs with a current efficiency between 60 and 90%, and the estimated energy cost is ~6 kJ/g Br. These data are similar to those for the chlor-alkali process that is commonly used for chlorine gas and sodium hydroxide production. The results demonstrate that bromide may be selectively removed from oil and gas brines to create an opportunity for environmental protection and resource recovery.

  20. On the possibility of magnetic nano-markers use for hydraulic fracturing in shale gas mining

    Science.gov (United States)

    Zawadzki, Jaroslaw; Bogacki, Jan

    2016-04-01

    Recently shale gas production became essential for the global economy, thanks to fast advances in shale fracturing technology. Shale gas extraction can be achieved by drilling techniques coupled with hydraulic fracturing. Further increasing of shale gas production is possible by improving the efficiency of hydraulic fracturing and assessing the spatial distribution of fractures in shale deposits. The latter can be achieved by adding magnetic markers to fracturing fluid or directly to proppant, which keeps the fracture pathways open. After that, the range of hydraulic fracturing can be assessed by measurement of vertical and horizontal component of earth's magnetic field before and after fracturing. The difference in these components caused by the presence of magnetic marker particles may allow to delineate spatial distribution of fractures. Due to the fact, that subterranean geological formations may contain minerals with significant magnetic properties, it is important to provide to the markers excellent magnetic properties which should be also, independent of harsh chemical and geological conditions. On the other hand it is of great significance to produce magnetic markers at an affordable price because of the large quantities of fracturing fluids or proppants used during shale fracturing. Examining the properties of nano-materials, it was found, that they possess clearly superior magnetic properties, as compared to the same structure but having a larger particle size. It should be then possible, to use lower amount of magnetic marker, to obtain the same effect. Although a research on properties of new magnetic nano-materials is very intensive, cheap magnetic nano-materials are not yet produced on a scale appropriate for shale gas mining. In this work we overview, in detail, geological, technological and economic aspects of using magnetic nano-markers in shale gas mining. Acknowledgment This work was supported by the NCBiR under Grant "Electromagnetic method to

  1. Fault activation by hydraulic fracturing in western Canada

    Science.gov (United States)

    Bao, Xuewei; Eaton, David W.

    2016-12-01

    Hydraulic fracturing has been inferred to trigger the majority of injection-induced earthquakes in western Canada, in contrast to the Midwestern United States, where massive saltwater disposal is the dominant triggering mechanism. A template-based earthquake catalog from a seismically active Canadian shale play, combined with comprehensive injection data during a 4-month interval, shows that earthquakes are tightly clustered in space and time near hydraulic fracturing sites. The largest event [moment magnitude (MW) 3.9] occurred several weeks after injection along a fault that appears to extend from the injection zone into crystalline basement. Patterns of seismicity indicate that stress changes during operations can activate fault slip to an offset distance of >1 km, whereas pressurization by hydraulic fracturing into a fault yields episodic seismicity that can persist for months.

  2. The study of crosslinked fluid leakoff in hydraulic fracturing physical simulations

    Energy Technology Data Exchange (ETDEWEB)

    Grothe, Vinicius Perrud; Ribeiro, Paulo Roberto [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo; Sousa, Jose Luiz Antunes de Oliveira e [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia. Dept. de Estruturas; Fernandes, Paulo Dore [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2000-07-01

    The fluid loss plays an important role in the design and execution of hydraulic fracturing treatments. The main objectives of this work were: the study of the fluid loss associated with the propagation of hydraulic fractures generated at laboratory; and the comparison of two distinct methods for estimating leakoff coefficients - Nolte analysis and the filtrate volume vs. square root of time plot. Synthetic rock samples were used as well as crosslinked hydroxypropyl guar (HPG) fluids in different polymer concentrations. The physical simulations comprised the confinement of (0.1 x 0.1 x 0.1) m{sup 3} rock samples in a load cell for the application of an in situ stress field. Different flow rates were employed in order to investigate shear effects on the overall leakoff coefficient. Horizontal radial fractures were hydraulically induced with approximate diameters, what was accomplished by controlling the injection time. Leakoff coefficients determined by means of the pressure decline analysis were compared to coefficients obtained from static filtration tests, considering similar experimental conditions. The research results indicated that the physical simulation of hydraulic fracturing may be regarded as an useful tool for evaluating the effectiveness of fracturing fluids and that it can supply reliable estimates of fluid loss coefficients. (author)

  3. Organic compounds in hydraulic fracturing fluids and wastewaters: A review.

    Science.gov (United States)

    Luek, Jenna L; Gonsior, Michael

    2017-10-15

    High volume hydraulic fracturing (HVHF) of shale to stimulate the release of natural gas produces a large quantity of wastewater in the form of flowback fluids and produced water. These wastewaters are highly variable in their composition and contain a mixture of fracturing fluid additives, geogenic inorganic and organic substances, and transformation products. The qualitative and quantitative analyses of organic compounds identified in HVHF fluids, flowback fluids, and produced waters are reviewed here to communicate knowledge gaps that exist in the composition of HVHF wastewaters. In general, analyses of organic compounds have focused on those amenable to gas chromatography, focusing on volatile and semi-volatile oil and gas compounds. Studies of more polar and non-volatile organic compounds have been limited by a lack of knowledge of what compounds may be present as well as quantitative methods and standards available for analyzing these complex mixtures. Liquid chromatography paired with high-resolution mass spectrometry has been used to investigate a number of additives and will be a key tool to further research on transformation products that are increasingly solubilized through physical, chemical, and biological processes in situ and during environmental contamination events. Diverse treatments have been tested and applied to HVHF wastewaters but limited information has been published on the quantitative removal of individual organic compounds. This review focuses on recently published information on organic compounds identified in flowback fluids and produced waters from HVHF. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Texas review of hydraulic fracturing water use and consumption

    Science.gov (United States)

    Nicot, J.; Reedy, R. C.; Costley, R.

    2012-12-01

    Hydraulic fracturing (HF) has a long history in the state of Texas where are located (1) several established plays, such as the Barnett Shale, (2) plays of recent interest, such as the Eagle Ford or the Wolfcamp, and (3) older plays being revisited such as the Wolfberry or the Granite Wash. We compiled current water use for year 2011 (about 82,000 acre-feet) and compared it to an older analysis done for year 2008 (about 36,000 acre-feet). A private database compiling state information and providing water use is complemented by a survey of the industry. Industry survey is the only way to access fresh water consumption estimated to be only a fraction of the total water use because of reuse of flowback water, use of recycled water from treatment plants and produced water, and use of brackish water. We analyzed these different components of the HF budget as well as their source, surface water vs. groundwater, with a focus on impacts on aquifers and groundwater resources.

  5. An XFEM Model for Hydraulic Fracturing in Partially Saturated Rocks

    Directory of Open Access Journals (Sweden)

    Salimzadeh Saeed

    2016-01-01

    Full Text Available Hydraulic fracturing is a complex multi-physics phenomenon. Numerous analytical and numerical models of hydraulic fracturing processes have been proposed. Analytical solutions commonly are able to model the growth of a single hydraulic fracture into an initially intact, homogeneous rock mass. Numerical models are able to analyse complex problems such as multiple hydraulic fractures and fracturing in heterogeneous media. However, majority of available models are restricted to single-phase flow through fracture and permeable porous rock. This is not compatible with actual field conditions where the injected fluid does not have similar properties as the host fluid. In this study we present a fully coupled hydro-poroelastic model which incorporates two fluids i.e. fracturing fluid and host fluid. Flow through fracture is defined based on lubrication assumption, while flow through matrix is defined as Darcy flow. The fracture discontinuity in the mechanical model is captured using eXtended Finite Element Method (XFEM while the fracture propagation criterion is defined through cohesive fracture model. The discontinuous matrix fluid velocity across fracture is modelled using leak-off loading which couples fracture flow and matrix flow. The proposed model has been discretised using standard Galerkin method, implemented in Matlab and verified against several published solutions. Multiple hydraulic fracturing simulations are performed to show the model robustness and to illustrate how problem parameters such as injection rate and rock permeability affect the hydraulic fracturing variables i.e. injection pressure, fracture aperture and fracture length. The results show the impact of partial saturation on leak-off and the fact that single-phase models may underestimate the leak-off.

  6. Earthquakes Induced by Hydraulic Fracturing in Poland Township, Ohio

    Science.gov (United States)

    Skoumal, R.; Brudzinski, M. R.; Currie, B. S.

    2014-12-01

    Felt seismicity induced by hydraulic fracturing is very rare with only a handful of reported cases worldwide. Using an optimized multi-station cross-correlation template matching routine, 77 earthquakes were identified in Poland Township, Mahoning County, Ohio that were closely related spatially and temporally to active hydraulic fracturing operations. We identified earthquakes as small as M ~1 up to M 3, one of the largest earthquakes induced by hydraulic fracturing in the United States. These events all occurred 4-12 March 2014 and the rate decayed once the Ohio Department of Natural Resources issued a shutdown of hydraulic fracturing at a nearby well on 10 March. Using a locally derived velocity model and double difference relocation, the earthquake epicenters occurred during six stimulation stages along two horizontal well legs that were located ~0.8 km away. Nearly 100 stages in nearby wells at greater distances from the earthquake source region did not coincide with detected seismicity. During the sequence, hypocenters migrated ~600 m along an azimuth of 083 degrees defining a vertically oriented plane of seismicity close to the top of the Precambrian basement. The focal mechanism determined for the M 3 event had a vertically oriented left-lateral fault plane consistent with the earthquake distribution and the regional stress field. The focal mechanism, orientation, and depth of hypocenters were similar to that of the 2011 Youngstown earthquake sequence that occurred ~20 km away, but was correlated with wastewater injection instead of hydraulic fracturing. Considering the relatively large magnitude of these events and the b-value of 0.85, it appears the hydraulic fracturing induced slip along a pre-existing fault/fracture zone optimally oriented in the regional stress field.

  7. Overview of Chronic Oral Toxicity Values for Chemicals Present in Hydraulic Fracturing Fluids, Flowback and Produced Waters

    Science.gov (United States)

    as part of EPA's Hydraulic Fracturing Drinking Water Assessment, EPA is summarizing existing toxicity data for chemicals reported to be used in hydraulic fracturing fluids and/or found in flowback or produced waters from hydraulically fractured wells

  8. Experimental validation of microseismic emissions from a controlled hydraulic fracture in a synthetic layered medium

    Science.gov (United States)

    Roundtree, Russell

    A controlled hydraulic fracture experiment was performed on two medium sized (11" x 11" x 15") synthetic layered blocks of low permeability, low porosity Lyons sandstone sandwiched between cement. The purpose of the research was to better understand and characterize the fracture evolution as the fracture tip impinged upon the layer boundaries between the well bonded layers. It is also one of the first documented uses of passive microseismic used in a laboratory environment to characterize hydraulic fracturing. A relatively low viscosity fluid of 1000 centipoise, compared to properly scaled previous work (Casas 2005, and Athavale 2007), was pumped at a constant rate of 10 mL/minute through a steel cased hole landed and isolated in the sandstone layer. Efforts were made to contain the hydraulic fracture within the confines of the rock specimen to retain the created hydraulic fracture geometry. Two identical samples and treatment schedules were created and differed only in the monitoring system used to characterize the microseismic activity during the fracture treatment. The first block had eight embedded P-wave transducers placed in the sandstone layer to record the passive microseismic emissions and localize the location and time of the acoustic event. The second block had six compressional wave transducers and twelve shear wave transducers embedded in the sandstone layer of the block. The intention was to record and process the seismic data using conventional P-wave to S-wave difference timing techniques well known in industry. While this goal ultimately not possible due to the geometry of the receiver placements and the limitations of the Vallene acquisition processing software, the data received and the events localized from the 18 transducer test were of much higher numbers and quality than on the eight transducer test. This experiment proved conclusively that passive seismic emission recording can yield positive results in the laboratory. Just as in the field

  9. Geological evidence for fluid overpressure, hydraulic fracturing and strong heating during maturation and migration of hydrocarbons in Mesozoic rocks of the northern Neuquén Basin, Mendoza Province, Argentina

    Science.gov (United States)

    Zanella, Alain; Cobbold, Peter R.; Ruffet, Gilles; Leanza, Hector A.

    2015-10-01

    In the northern Neuquén Basin of Argentina (especially in Mendoza Province), there is strong geological evidence for fluid overpressure in the past. The evidence takes the form of bitumen veins and bedding-parallel veins of fibrous calcite ('beef'). Such veins are widespread in the fold-and-thrust belt of the Malargűe area, where bitumen mining has been active for a century or so. So as to collect information on the development of fluid overpressure in this part of the Neuquén Basin, several old mines were visited and studied in the Malargűe area. Here the bitumen veins have intruded mainly the Late Jurassic to Early Cretaceous Mendoza Group, but also the Late Cretaceous Neuquén Group. The veins have the forms of bedding-parallel sills or dykes and they are especially thick within anticlines, forming saddle-reefs in several places. Beef veins are also numerous in the Malargűe area. They contain bitumen and therefore seem to have formed at the same time as the bitumen veins. Near many outcrops of bitumen and beef, we have found fine-grained volcanic intrusive bodies. The best examples are from the La Valenciana syncline. According to 39Ar-40Ar dating, these bodies are mainly of Mid-Miocene age. More generally, volcanism, deformation and maturation of source rocks seem to have reached a climax in Miocene times, when the subducting Pacific slab became relatively flat.

  10. Elucidating hydraulic fracturing impacts on groundwater quality using a regional geospatial statistical modeling approach

    Energy Technology Data Exchange (ETDEWEB)

    Burton, Taylour G., E-mail: tgburton@uh.edu [Civil and Environmental Engineering, University of Houston, W455 Engineering Bldg. 2, Houston, TX 77204-4003 (United States); Rifai, Hanadi S., E-mail: rifai@uh.edu [Civil and Environmental Engineering, University of Houston, N138 Engineering Bldg. 1, Houston, TX 77204-4003 (United States); Hildenbrand, Zacariah L., E-mail: zac@informenv.com [Inform Environmental, LLC, Dallas, TX 75206 (United States); Collaborative Laboratories for Environmental Analysis and Remediation, University of Texas at Arlington, Arlington, TX 76019 (United States); Carlton, Doug D., E-mail: doug.carlton@mavs.uta.edu [Collaborative Laboratories for Environmental Analysis and Remediation, University of Texas at Arlington, Arlington, TX 76019 (United States); Department of Chemistry & Biochemistry, The University of Texas at Arlington, Arlington, TX (United States); Fontenot, Brian E., E-mail: brian.fonteno@mavs.uta.edu [Collaborative Laboratories for Environmental Analysis and Remediation, University of Texas at Arlington, Arlington, TX 76019 (United States); Schug, Kevin A., E-mail: kschug@uta.edu [Collaborative Laboratories for Environmental Analysis and Remediation, University of Texas at Arlington, Arlington, TX 76019 (United States); Department of Chemistry & Biochemistry, The University of Texas at Arlington, Arlington, TX (United States)

    2016-03-01

    Hydraulic fracturing operations have been viewed as the cause of certain environmental issues including groundwater contamination. The potential for hydraulic fracturing to induce contaminant pathways in groundwater is not well understood since gas wells are completed while isolating the water table and the gas-bearing reservoirs lay thousands of feet below the water table. Recent studies have attributed ground water contamination to poor well construction and leaks in the wellbore annulus due to ruptured wellbore casings. In this paper, a geospatial model of the Barnett Shale region was created using ArcGIS. The model was used for spatial analysis of groundwater quality data in order to determine if regional variations in groundwater quality, as indicated by various groundwater constituent concentrations, may be associated with the presence of hydraulically fractured gas wells in the region. The Barnett Shale reservoir pressure, completions data, and fracture treatment data were evaluated as predictors of groundwater quality change. Results indicated that elevated concentrations of certain groundwater constituents are likely related to natural gas production in the study area and that beryllium, in this formation, could be used as an indicator variable for evaluating fracturing impacts on regional groundwater quality. Results also indicated that gas well density and formation pressures correlate to change in regional water quality whereas proximity to gas wells, by itself, does not. The results also provided indirect evidence supporting the possibility that micro annular fissures serve as a pathway transporting fluids and chemicals from the fractured wellbore to the overlying groundwater aquifers. - Graphical abstract: A relative increase in beryllium concentrations in groundwater for the Barnett Shale region from 2001 to 2011 was visually correlated with the locations of gas wells in the region that have been hydraulically fractured over the same time period

  11. 78 FR 25267 - Request for Information To Inform Hydraulic Fracturing Research Related to Drinking Water Resources

    Science.gov (United States)

    2013-04-30

    ... AGENCY Request for Information To Inform Hydraulic Fracturing Research Related to Drinking Water... research on the potential impacts of hydraulic fracturing on drinking water resources from April 30, 2013... research to examine the relationship between hydraulic fracturing and drinking water resources. The...

  12. Pulsating hydraulic fracturing technology in low permeability coal seams

    Institute of Scientific and Technical Information of China (English)

    Wang Wenchao; Li Xianzhong; Lin Baiquan; Zhai Cheng

    2015-01-01

    Based on the difficult situation of gas drainage in a single coal bed of high gas content and low perme-ability, we investigate the technology of pulsating hydraulic pressure relief, the process of crank plunger movement and the mechanism of pulsating pressure formation using theoretical research, mathematical modeling and field testing. We analyze the effect of pulsating pressure on the formation and growth of fractures in coal by using the pulsating hydraulic theory in hydraulics. The research results show that the amplitude of fluctuating pressure tends to increase in the case where the exit is blocked, caused by pulsating pressure reflection and frictional resistance superposition, and it contributes to the growth of fractures in coal. The crack initiation pressure of pulsating hydraulic fracturing is 8 MPa, which is half than that of normal hydraulic fracturing;the pulsating hydraulic fracturing influence radius reaches 8 m. The total amount of gas extraction is increased by 3.6 times, and reaches 50 L/min at the highest point. The extraction flow increases greatly, and is 4 times larger than that of drilling without fracturing and 1.2 times larger than that of normal hydraulic fracturing. The technology provides a technical measure for gas drainage of high gas content and low permeability in the single coal bed.

  13. Hydraulic fracturing, energy transition and political engagement in the Netherlands

    NARCIS (Netherlands)

    Rasch, Elisabet Dueholm; Köhne, Michiel

    2016-01-01

    This paper analyses how citizens (re)define their relation to the state in the contestation of hydraulic fracturing in the Noordoostpolder (the Netherlands) in the context of energy transition. It approaches citizenship as the negotiations between governments and citizens about in-and exclusion i

  14. Hydraulic fracturing, energy transition and political engagement in the Netherlands

    NARCIS (Netherlands)

    Rasch, Elisabet Dueholm; Köhne, Michiel

    2015-01-01

    This paper analyses how citizens (re)define their relation to the state in the contestation of hydraulic fracturing in the Noordoostpolder (the Netherlands) in the context of energy transition. It approaches citizenship as the negotiations between governments and citizens about in-and exclusion i

  15. Numerical Analysis on the Formation of Fracture Network during the Hydraulic Fracturing of Shale with Pre-Existing Fractures

    Directory of Open Access Journals (Sweden)

    Jianming He

    2017-05-01

    Full Text Available In this paper, configurations of pre-existing fractures in cubic rock blocks were investigated and reconstructed for the modeling of experimental hydraulic fracturing. The fluid-rock coupling process of hydraulic fracturing was simulated based on the displacement discontinuities method. The numerical model was validated against the related laboratory experiments. The stimulated fracture configurations under different conditions can be clearly shown using the validated numerical model. First, a dominated fracture along the maximum principle stress direction is always formed when the stress difference is large enough. Second, there are less reopened pre-existing fractures, more newly formed fractures and less shear fractures with the increase of the cohesion value of pre-existing fractures. Third, the length of the stimulated shear fracture decreases rapidly with the increase of the friction coefficient, while the length of the tensile fracture has no correlation to the fiction coefficient. Finally, the increase of the fluid injection rate is favorable to the formation of a fracture network. The unfavorable effects of the large stress difference and the large cohesion of pre-existing fractures can be partly suppressed by an increase of the injection rate in the hydraulic fracturing treatment. The results of this paper are useful for understanding fracture propagation behaviors during the hydraulic fracturing of shale reservoirs with pre-existing fractures.

  16. Assessment of the Acute and Chronic Health Hazards of Hydraulic Fracturing Fluids.

    Science.gov (United States)

    Wattenberg, Elizabeth V; Bielicki, Jeffrey M; Suchomel, Ashley E; Sweet, Jessica T; Vold, Elizabeth M; Ramachandran, Gurumurthy

    2015-01-01

    There is growing concern about how hydraulic fracturing affects public health because this activity involves handling large volumes of fluids that contain toxic and carcinogenic constituents, which are injected under high pressure through wells into the subsurface to release oil and gas from tight shale formations. The constituents of hydraulic fracturing fluids (HFFs) present occupational health risks because workers may be directly exposed to them, and general public health risks because of potential air and water contamination. Hazard identification, which focuses on the types of toxicity that substances may cause, is an important step in the complex health risk assessment of hydraulic fracturing. This article presents a practical and adaptable tool for the hazard identification of HFF constituents, and its use in the analysis of HFF constituents reported to be used in 2,850 wells in North Dakota between December 2009 and November 2013. Of the 569 reported constituents, 347 could be identified by a Chemical Abstract Service Registration Number (CASRN) and matching constituent name. The remainder could not be identified either because of trade secret labeling (210) or because of an invalid CASRN (12). Eleven public databases were searched for health hazard information on thirteen health hazard endpoints for 168 identifiable constituents that had at least 25 reports of use. Health hazard counts were generated for chronic and acute endpoints, including those associated with oral, inhalation, ocular, and dermal exposure. Eleven of the constituents listed in the top 30 by total health hazard count were also listed in the top 30 by reports of use. This includes naphthalene, which along with benzyl chloride, has the highest health hazard count. The top 25 constituents reportedly used in North Dakota largely overlap with those reported for Texas and Pennsylvania, despite different geologic formations, target resources (oil vs. gas), and disclosure requirements

  17. Characterization of hydraulic fractures and reservoir properties of shale using natural tracers

    Science.gov (United States)

    Heath, J. E.; Gardner, P.; Kuhlman, K. L.; Malama, B.

    2013-12-01

    Hydraulic fracturing plays a major role in the economic production of hydrocarbon from shale. Current fracture characterization techniques are limited in diagnosing the transport properties of the fractures on the near wellbore scale to that of the entire stimulated reservoir volume. Microseismic reveals information on fracture geometries, but not transport properties. Production analysis (e.g., rate transient analysis using produced fluids) estimates fracture and reservoir flow characteristics, but often relies on simplified models in terms of fracture geometries and fluid storage and transport. We present the approach and potential benefits of incorporating natural tracers with production data analysis for fracture and reservoir characterization. Hydraulic fracturing releases omnipresent natural tracers that accumulate in low permeability rocks over geologic time (e.g., radiogenic 4He and 40Ar). Key reservoir characteristics govern the tracer release, which include: the number, connectivity, and geometry of fractures; the distribution of fracture-surface-area to matrix-block-volume; and the nature of hydrocarbon phases within the reservoir (e.g., methane dissolved in groundwater or present as a separate gas phase). We explore natural tracer systematics using numerical techniques under relevant shale-reservoir conditions. We evaluate the impact on natural tracer transport due to a variety of conceptual models of reservoir-transport properties and boundary conditions. Favorable attributes for analysis of natural tracers include the following: tracer concentrations start with a well-defined initial condition (i.e., equilibrium between matrix and any natural fractures); there is a large suite of tracers that cover a range of at least 7x in diffusion coefficients; and diffusive mass-transfer out of the matrix into hydraulic fractures will cause elemental and isotopic fractionation. Sandia National Laboratories is a multi-program laboratory managed and operated by

  18. Impact of ductility on hydraulic fracturing in shales

    Science.gov (United States)

    MacMinn, Chris; Auton, Lucy

    2016-04-01

    Hydraulic fracturing is a method for extracting natural gas and oil from low-permeability rocks such as shale via the high-pressure injection of fluid into the bulk of the rock. The goal is to initiate and propagate fractures that will provide hydraulic access deeper into the reservoir, enabling gas or oil to be collected from a larger region of the rock. Fracture is the tensile failure of a brittle material upon reaching a threshold tensile stress, but some shales have a high clay content and may yield plastically before fracturing. Plastic deformation is the shear failure of a ductile material, during which stress relaxes through irreversible rearrangements of the particles of the material. Here, we investigate the impact of the ductility of shales on hydraulic fracturing. We first consider a simple, axisymmetric model for radially outward fluid injection from a wellbore into a ductile porous rock. We use this model to show that plastic deformation greatly reduces the maximum tensile stress, and that this maximum stress does not always occur at the wellbore. We then complement these results with laboratory experiments in an analogue system, and with numerical simulations based on the discrete element method (DEM), both of which suggest that ductile failure can indeed dramatically change the resulting deformation pattern. These results imply that hydraulic fracturing may fail in ductile rocks, or that the required injection rate for fracking may be much larger than the rate predicted from models that assume purely elastic mechanical behavior.

  19. Numerical Investigation into the Effect of Natural Fracture Density on Hydraulic Fracture Network Propagation

    Directory of Open Access Journals (Sweden)

    Zhaohui Chong

    2017-07-01

    Full Text Available Hydraulic fracturing is an important method to enhance permeability in oil and gas exploitation projects and weaken hard roofs of coal seams to reduce dynamic disasters, for example, rock burst. It is necessary to fully understand the mechanism of the initiation, propagation, and coalescence of hydraulic fracture network (HFN caused by fluid flow in rock formations. In this study, a coupled hydro-mechanical model was built based on synthetic rock mass (SRM method to investigate the effects of natural fracture (NF density on HFN propagation. Firstly, the geometrical structures of NF obtained from borehole images at the field scale were applied to the model. Secondly, the micro-parameters of the proposed model were validated against the interaction between NF and hydraulic fracture (HF in physical experiments. Finally, a series of numerical simulations were performed to study the mechanism of HFN propagation. In addition, confining pressure ratio (CPR and injection rate were also taken into consideration. The results suggested that the increase of NF density drives the growth of stimulated reservoir volume (SRV, concentration area of injection pressure (CAIP, and the number of cracks caused by NF. The number of tensile cracks caused by rock matrix decrease gradually with the increase of NF density, and the number of shear cracks caused by rock matrix are almost immune to the change of NF density. The propagation orientation of HFN and the breakdown pressure in rock formations are mainly controlled by CPR. Different injection rates would result in a relatively big difference in the gradient of injection pressure, but this difference would be gradually narrowed with the increase of NF density. Natural fracture density is the key factor that influences the percentages of different crack types in HFN, regardless of the value of CPR and injection rate. The proposed model may help predict HFN propagation and optimize fracturing treatment designs in

  20. Complementary hydro-mechanical coupled finite/discrete element and microseismic modelling to predict hydraulic fracture propagation in tight shale reservoirs

    Science.gov (United States)

    Profit, Matthew; Dutko, Martin; Yu, Jianguo; Cole, Sarah; Angus, Doug; Baird, Alan

    2016-04-01

    This paper presents a novel approach to predict the propagation of hydraulic fractures in tight shale reservoirs. Many hydraulic fracture modelling schemes assume that the fracture direction is pre-seeded in the problem domain discretisation. This is a severe limitation as the reservoir often contains large numbers of pre-existing fractures that strongly influence the direction of the propagating fracture. To circumvent these shortcomings, a new fracture modelling treatment is proposed where the introduction of discrete fracture surfaces is based on new and dynamically updated geometrical entities rather than the topology of the underlying spatial discretisation. Hydraulic fracturing is an inherently coupled engineering problem with interactions between fluid flow and fracturing when the stress state of the reservoir rock attains a failure criterion. This work follows a staggered hydro-mechanical coupled finite/discrete element approach to capture the key interplay between fluid pressure and fracture growth. In field practice, the fracture growth is hidden from the design engineer and microseismicity is often used to infer hydraulic fracture lengths and directions. Microseismic output can also be computed from changes of the effective stress in the geomechanical model and compared against field microseismicity. A number of hydraulic fracture numerical examples are presented to illustrate the new technology.

  1. First successful multistage hydraulic fracture monitoring for a horizontal well in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, Guillermo; Rios, Austreberto; Riano, Juan M. [PEMEX, Mexico, DF (Mexico); Sanchez, Adrian; Bustos, Tomas [Schlumberger, Mexico DF (Mexico)

    2008-07-01

    In their constant effort to increase the production from Chicontepec, PEMEX drilled a multilateral well with three horizontal lateral sections; the intention was to increase the production in comparison with vertical wells. In the second arm of this well four intervals were identified to be fractured, this was a new approach since it was the first occasion that multiple fractures were planned in a horizontal well. An important part of the project was the evaluation of the effectiveness of the hydraulic fracturing. This evaluation was performed by micro seismic monitoring during the treatment. This technology allows the detection of events generated during the fluid injection in the reservoir, with receivers located in a nearby monitoring well. The interpretation of this data allows the identification in 3 D space of the fracture locations. This information is valuable for optimization of subsequent treatments and for planning the field development. The data is recorded in real time and can be used to make decisions during the fracturing operation. In this paper we describe the results of the hydraulic fracturing monitoring performed in four intervals in a horizontal well showing the geometry and direction of each one of the fractures. (author)

  2. Analysis of Proppant Hydraulic Fracturing in a Sand Oil Reservoir in Southwest of Iran

    OpenAIRE

    Reza Masoomi; Iniko Bassey; Dolgow Sergie Viktorovich; Hosein Dehghani

    2015-01-01

    Hydraulic fracturing is one way to increase the productivity of oil and gas wells. One of the most fundamental successes of hydraulic fracturing operation is selecting the proper size and type of proppants which are used during the process. The aim of this study is optimizing the type and size of used propant in hydraulic fracturing operation in a sand oil reservoir in southwest of Iran. In this study sand and ceramic (sintered bauxite) have been considered as proppant type. Also the various ...

  3. Numerical modeling of concrete hydraulic fracturing with extended finite element method

    Institute of Scientific and Technical Information of China (English)

    REN QingWen; DONG YuWen; YU TianTang

    2009-01-01

    The extended finite element method (XFEM) is a new numerical method for modeling discontinuity.Research about numerical modeling for concrete hydraulic fracturing by XFEM is explored. By building the virtual work principle of the fracture problem considering water pressure on the crack surface, the governing equations of XFEM for hydraulic fracture modeling are derived. Implementation of the XFEM for hydraulic fracturing is presented. Finally, the method is verified by two examples and the advan-tages of the XFEM for hydraulic fracturing analysis are displayed.

  4. Numerical modeling of concrete hydraulic fracturing with extended finite element method

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The extended finite element method (XFEM) is a new numerical method for modeling discontinuity. Research about numerical modeling for concrete hydraulic fracturing by XFEM is explored. By building the virtual work principle of the fracture problem considering water pressure on the crack surface, the governing equations of XFEM for hydraulic fracture modeling are derived. Implementation of the XFEM for hydraulic fracturing is presented. Finally, the method is verified by two examples and the advan- tages of the XFEM for hydraulic fracturing analysis are displayed.

  5. Hydraulic fracturing water use variability in the United States and potential environmental implications

    OpenAIRE

    Gallegos, Tanya J.; Varela, Brian A.; Haines, Seth S.; Engle, Mark A.

    2015-01-01

    Abstract Until now, up‐to‐date, comprehensive, spatial, national‐scale data on hydraulic fracturing water volumes have been lacking. Water volumes used (injected) to hydraulically fracture over 263,859 oil and gas wells drilled between 2000 and 2014 were compiled and used to create the first U.S. map of hydraulic fracturing water use. Although median annual volumes of 15,275 m3 and 19,425 m3 of water per well was used to hydraulically fracture individual horizontal oil and gas wells, respecti...

  6. Pioneer hydraulic fracturing intervention on Brazilian Amazon Forest; Operacao pioneira de fraturamento hidraulico na selva Amazonica brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Cledeilson; Silva, Luis A.; Duque, Luis H.; Steffan, Rodolfo H.P.; Guimaraes, Zacarias [Baker Hughes, Houston, TX (United States); Sabino, Afonso H. dos S.; Corregio, Fabio; Ferreira, Jose Carlos da Silva; Melo, Marcelo Moura; Ludovice, Roberto C. [Petroleo Brasileiro S.A (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    Hydraulic fracturing is a stimulation technique where fluid is pumped with enough energy to create a fracture in the reservoir and to propagate it filling the broken zone with proppant agent. To the end of the treatment the proppant agent will support the fracture creating a production flow path, once it will have permeability higher than the original formation. Since a long time it was desired to use that technique to explore tight reservoirs in the Solimoes basin. However the lack of information on the interest zones, the great amount of equipment and fluids volumes involved hindered the application in an area that withholds a environmental certification. In November 10th of 2011 these challenges were surpassed. This article describes the technique, job details and results of the pioneering hydraulic fracturing intervention in the heart of the Amazon forest that became economically viable the gas production in tight reservoirs of the Solimoes basin with minimum environmental impact. (author)

  7. Imaging hydraulic fractures by microseismic migration for downhole monitoring system

    Science.gov (United States)

    Lin, Ye; Zhang, Haijiang

    2016-12-01

    It has been a challenge to accurately characterize fracture zones created by hydraulic fracturing from microseismic event locations. This is because generally detected events are not complete due to the associated low signal to noise ratio and some fracturing stages may not produce microseismic events even if fractures are well developed. As a result, spatial distribution of microseismic events may not well represent fractured zones by hydraulic fracturing. Here, we propose a new way to characterize the fractured zones by reverse time migration (RTM) of microseismic waveforms from some events. This is based on the fact that fractures filled with proppants and other fluids can act as strong scatterers for seismic waves. Therefore, for multi-stage hydraulic fracturing, recorded waveforms from microseismic events induced in a more recent stage may be scattered by fractured zones from previous stages. Through RTM of microseismic waveforms in the current stage, we can determine fractured zones created in previous stages by imaging area of strong scattering. We test the feasibility of this method using synthetic models with different configurations of microseismic event locations and borehole sensor positions for a 2D downhole microseismic monitoring system. Synthetic tests show that with a few events fractured zones can be directly imaged and thus the stimulated reservoir volume (SRV) can be estimated. Compared to the conventional location-based SRV estimation method, the proposed new method does not depend on the completeness of detected events and only a limited number of detected and located events are necessary for characterizing fracture distribution. For simplicity, the 2D model is used for illustrating the concept of microseismic RTM for imaging the fracture zone but the method can be adapted to real cases in the future.

  8. Numerical Investigation into the Influence of Bedding Plane on Hydraulic Fracture Network Propagation in Shale Formations

    Science.gov (United States)

    Yushi, Zou; Xinfang, Ma; Shicheng, Zhang; Tong, Zhou; Han, Li

    2016-09-01

    Shale formations are often characterized by low matrix permeability and contain numerous bedding planes (BPs) and natural fractures (NFs). Massive hydraulic fracturing is an important technology for the economic development of shale formations in which a large-scale hydraulic fracture network (HFN) is generated for hydrocarbon flow. In this study, HFN propagation is numerically investigated in a horizontally layered and naturally fractured shale formation by using a newly developed complex fracturing model based on the 3D discrete element method. In this model, a succession of continuous horizontal BP interfaces and vertical NFs is explicitly represented and a shale matrix block is considered impermeable, transversely isotropic, and linearly elastic. A series of simulations is performed to illustrate the influence of anisotropy, associated with the presence of BPs, on the HFN propagation geometry in shale formations. Modeling results reveal that the presence of BP interfaces increases the injection pressure during fracturing. HF deflection into a BP interface tends to occur under high strength and elastic anisotropy as well as in low vertical stress anisotropy conditions, which generate a T-shaped or horizontal fracture. Opened BP interfaces may limit the growth of the fracture upward and downward, resulting in a very low stimulated thickness. However, the opened BP interfaces favor fracture complexity because of the improved connection between HFs and NFs horizontally under moderate vertical stress anisotropy. This study may help predict the HF growth geometry and optimize the fracturing treatment designs in shale formations with complex depositional heterogeneity.

  9. Hydraulic fracture propagation modeling and data-based fracture identification

    Science.gov (United States)

    Zhou, Jing

    Successful shale gas and tight oil production is enabled by the engineering innovation of horizontal drilling and hydraulic fracturing. Hydraulically induced fractures will most likely deviate from the bi-wing planar pattern and generate complex fracture networks due to mechanical interactions and reservoir heterogeneity, both of which render the conventional fracture simulators insufficient to characterize the fractured reservoir. Moreover, in reservoirs with ultra-low permeability, the natural fractures are widely distributed, which will result in hydraulic fractures branching and merging at the interface and consequently lead to the creation of more complex fracture networks. Thus, developing a reliable hydraulic fracturing simulator, including both mechanical interaction and fluid flow, is critical in maximizing hydrocarbon recovery and optimizing fracture/well design and completion strategy in multistage horizontal wells. A novel fully coupled reservoir flow and geomechanics model based on the dual-lattice system is developed to simulate multiple nonplanar fractures' propagation in both homogeneous and heterogeneous reservoirs with or without pre-existing natural fractures. Initiation, growth, and coalescence of the microcracks will lead to the generation of macroscopic fractures, which is explicitly mimicked by failure and removal of bonds between particles from the discrete element network. This physics-based modeling approach leads to realistic fracture patterns without using the empirical rock failure and fracture propagation criteria required in conventional continuum methods. Based on this model, a sensitivity study is performed to investigate the effects of perforation spacing, in-situ stress anisotropy, rock properties (Young's modulus, Poisson's ratio, and compressive strength), fluid properties, and natural fracture properties on hydraulic fracture propagation. In addition, since reservoirs are buried thousands of feet below the surface, the

  10. Understanding hydraulic fracturing: a multi-scale problem.

    Science.gov (United States)

    Hyman, J D; Jiménez-Martínez, J; Viswanathan, H S; Carey, J W; Porter, M L; Rougier, E; Karra, S; Kang, Q; Frash, L; Chen, L; Lei, Z; O'Malley, D; Makedonska, N

    2016-10-13

    Despite the impact that hydraulic fracturing has had on the energy sector, the physical mechanisms that control its efficiency and environmental impacts remain poorly understood in part because the length scales involved range from nanometres to kilometres. We characterize flow and transport in shale formations across and between these scales using integrated computational, theoretical and experimental efforts/methods. At the field scale, we use discrete fracture network modelling to simulate production of a hydraulically fractured well from a fracture network that is based on the site characterization of a shale gas reservoir. At the core scale, we use triaxial fracture experiments and a finite-discrete element model to study dynamic fracture/crack propagation in low permeability shale. We use lattice Boltzmann pore-scale simulations and microfluidic experiments in both synthetic and shale rock micromodels to study pore-scale flow and transport phenomena, including multi-phase flow and fluids mixing. A mechanistic description and integration of these multiple scales is required for accurate predictions of production and the eventual optimization of hydrocarbon extraction from unconventional reservoirs. Finally, we discuss the potential of CO2 as an alternative working fluid, both in fracturing and re-stimulating activities, beyond its environmental advantages.This article is part of the themed issue 'Energy and the subsurface'.

  11. Effect of ground stress on hydraulic fracturing of methane well

    Institute of Scientific and Technical Information of China (English)

    DU Chun-zhi; MAO Xian-biao; MIAO Xie-xing; WANG Peng

    2008-01-01

    Most of the coal reservoirs in China are of low-permeability, so hydraulic fracturing is widely used to improve the permeability in the extraction of gas by ground drilling. The ground stress around the well was analyzed by using theory of elasticity. The pressure when the well fractured is formulated and the effect of ground stress on pressure is discussed. The effect of ground-stress-differences on hydraulic fracturing was analyzed by using the numerical software RFPA2D-Flow in reference to the tectonic stress in Jincheng coal area. The results show that: 1) the position where initial fracture appears is random and fracture branches emerge when the fractures expand if ground stresses in any two directions within a horizontal plane are equal; 2) otherwise, the fractures expand in general along the direction of maximum ground stress and the critical pressure decreases with increasing ground-stress-differences and 3) the preferred well-disposition pattern is diamond shaped. The preferred well spacing is 250 m×300 m. This study can provide a reference for the design of wells.

  12. Investigation of Possible Wellbore Cement Failures During Hydraulic Fracturing Operations

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jihoon; Moridis, George

    2014-11-01

    We model and assess the possibility of shear failure, using the Mohr-Coulomb model ? along the vertical well by employing a rigorous coupled flow-geomechanic analysis. To this end, we vary the values of cohesion between the well casing and the surrounding cement to representing different quality levels of the cementing operation (low cohesion corresponds to low-quality cement and/or incomplete cementing). The simulation results show that there is very little fracturing when the cement is of high quality.. Conversely, incomplete cementing and/or weak cement can causes significant shear failure and the evolution of long fractures/cracks along the vertical well. Specifically, low cohesion between the well and cemented areas can cause significant shear failure along the well, but the same cohesion as the cemented zone does not cause shear failure. When the hydraulic fracturing pressure is high, low cohesion of the cement can causes fast propagation of shear failure and of the resulting fracture/crack, but a high-quality cement with no weak zones exhibits limited shear failure that is concentrated near the bottom of the vertical part of the well. Thus, high-quality cement and complete cementing along the vertical well appears to be the strongest protection against shear failure of the wellbore cement and, consequently, against contamination hazards to drinking water aquifers during hydraulic fracturing operations.

  13. The Potential Impacts of Hydraulic Fracturing on Agriculture

    Directory of Open Access Journals (Sweden)

    Beng Ong

    2014-10-01

    Full Text Available Hydraulic fracturing (or “fracking” is a method of extracting oil and natural gas trapped in deep rock layers underground by pumping water, sand, and other chemicals/additives at high pressures into a well drilled vertically, and then horizontally into the rocks.Advocates of fracking in U.S. have skillfully positioned domestic natural gas as a sensible alternative energy to the country’s goals of reducing carbon emissions and dependence on foreign oil, while simultaneously creating jobs locally. Opponents to fracking, however, alleged that the process pollutes the air, contaminates the soil and water, particularly in farming/rural communities. Due to page limitson this paper, we discussed only the potential impacts of hydraulic fracturing on water, and consequently, agriculture. Any impact on agriculture extends beyond the perimeter of a farm or plot of rural land where fracking operations occur. Fruits, vegetables, dairy, and meats from an impacted farming region may be shipped to other parts of the country, or even internationally. Fracking challenges stakeholders to confront the trade-offs between economic development and public health/safety; thus multiple viewpoints and issues were raised.Keywords: Hydraulic Fracking; Environmental Sustainability; Water Contamination; Agriculture vs. Energy; Shale Gas.

  14. Sulfide Generation by Dominant Halanaerobium Microorganisms in Hydraulically Fractured Shales

    Energy Technology Data Exchange (ETDEWEB)

    Booker, Anne E.; Borton, Mikalya; Daly, Rebecca; Welch, Susan; Nicora, Carrie D.; Hoyt, David W.; Wilson, Travis; Purvine, Samuel O.; Wolfe, Richard; Sharma, Shihka; Mouser, Paula J.; Cole, David R.; Lipton, Mary S.; Wrighton, Kelly C.; Wilkins, Michael J.

    2017-07-05

    Hydraulic fracturing of black shale formations has greatly increased United States oil and natural gas recovery. However, the accumulation of biomass in subsurface reservoirs and pipelines is detrimental because of possible well souring, microbially induced corrosion, and pore clogging. Temporal sampling of produced fluids from a well in the Utica Shale revealed the dominance of Halanaerobium strains within the in situ microbial community and the potential for these microor- ganisms to catalyze thiosulfate-dependent sulfidogenesis. From these field data, we investigated biogenic sulfide production catalyzed by a Halanaerobium strain iso- lated from the produced fluids using proteogenomics and laboratory growth experi- ments. Analysis of Halanaerobium isolate genomes and reconstructed genomes from metagenomic data sets revealed the conserved presence of rhodanese-like proteins and anaerobic sulfite reductase complexes capable of converting thiosulfate to sul- fide. Shotgun proteomics measurements using a Halanaerobium isolate verified that these proteins were more abundant when thiosulfate was present in the growth medium, and culture-based assays identified thiosulfate-dependent sulfide produc- tion by the same isolate. Increased production of sulfide and organic acids during the stationary growth phase suggests that fermentative Halanaerobium uses thiosul- fate to remove excess reductant. These findings emphasize the potential detrimental effects that could arise from thiosulfate-reducing microorganisms in hydraulically fractured shales, which are undetected by current industry-wide corrosion diagnos- tics.

  15. Hydraulic Fracturing for Oil and Gas: Impacts from the Hydraulic Fracturing Water Cycle on Drinking Water Resources in the United States (Final Report)

    Science.gov (United States)

    This final report provides a review and synthesis of available scientific information concerning the relationship between hydraulic fracturing activities and drinking water resources in the United States. The report is organized around activities in the hydraulic...

  16. Phenomenon of methane driven caused by hydraulic fracturing in methane-bearing coal seams

    Institute of Scientific and Technical Information of China (English)

    Huang Bingxiang; Cheng Qingying; Chen Shuliang

    2016-01-01

    The methane concentration of the return current will always be enhanced to a certain degree when hydraulic fracturing with bedding drilling is implemented to a gassy coal seam in an underground coal mine. The methane in coal seam is driven out by hydraulic fracturing. Thus, the phenomenon is named as methane driven effect of hydraulic fracturing. After deep-hole hydraulic fracturing at the tunneling face of the gassy coal seam, the coal methane content exhibits a‘low-high-low”distribution along exca-vation direction in the following advancing process, verifying the existence of methane driven caused by hydraulic fracturing in methane-bearing coal seam. Hydraulic fracturing causes the change of pore-water and methane pressure in surrounding coal. The uneven distribution of the pore pressure forms a pore pressure gradient. The free methane migrates from the position of high pore (methane) pressure to the position of low pore (methane) pressure. The methane pressure gradient is the fundamental driving force for methane-driven coal seam hydraulic fracturing. The uneven hydraulic crack propagation and the effect of time (as some processes need time to complete and are not completed instantaneously) will result in uneven methane driven. Therefore, an even hydraulic fracturing technique should be used to avoid the negative effects of methane driven; on the other hand, by taking fully advantage of methane driven, two technologies are presented.

  17. Technology and means of a coal seam interval hydraulic fracturing for the seam degassing intensification

    Science.gov (United States)

    Klishin, VI; Opruk, GY; Tatsienko, AL

    2017-02-01

    Interval hydraulic fracturing use for the seam degassing intensification actuality is explained. The known methods of degassing are reviewed. Technological scheme of the interval coal seam hydraulic fracturing implementation is worked out. The equipment to fulfill degassing intensification measures is suggested.

  18. Hydraulic fracturing water use variability in the United States and potential environmental implications

    Science.gov (United States)

    Gallegos, Tanya J.; Varela, Brian A.; Haines, Seth S.; Engle, Mark A.

    2015-01-01

    Until now, up-to-date, comprehensive, spatial, national-scale data on hydraulic fracturing water volumes have been lacking. Water volumes used (injected) to hydraulically fracture over 263,859 oil and gas wells drilled between 2000 and 2014 were compiled and used to create the first U.S. map of hydraulic fracturing water use. Although median annual volumes of 15,275 m3 and 19,425 m3 of water per well was used to hydraulically fracture individual horizontal oil and gas wells, respectively, in 2014, about 42% of wells were actually either vertical or directional, which required less than 2600 m3 water per well. The highest average hydraulic fracturing water usage (10,000−36,620 m3 per well) in watersheds across the United States generally correlated with shale-gas areas (versus coalbed methane, tight oil, or tight gas) where the greatest proportion of hydraulically fractured wells were horizontally drilled, reflecting that the natural reservoir properties influence water use. This analysis also demonstrates that many oil and gas resources within a given basin are developed using a mix of horizontal, vertical, and some directional wells, explaining why large volume hydraulic fracturing water usage is not widespread. This spatial variability in hydraulic fracturing water use relates to the potential for environmental impacts such as water availability, water quality, wastewater disposal, and possible wastewater injection-induced earthquakes.

  19. 40 CFR 147.52 - State-administered program-Hydraulic Fracturing of Coal Beds.

    Science.gov (United States)

    2010-07-01

    ... Fracturing of Coal Beds. 147.52 Section 147.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... PROGRAMS Alabama § 147.52 State-administered program—Hydraulic Fracturing of Coal Beds. The UIC program for hydraulic fracturing of coal beds in the State of Alabama, except those on Indian lands, is the...

  20. Hydraulic fracturing water use variability in the United States and potential environmental implications

    Science.gov (United States)

    Gallegos, Tanya J.; Varela, Brian A.; Haines, Seth S.; Engle, Mark A.

    2015-07-01

    Until now, up-to-date, comprehensive, spatial, national-scale data on hydraulic fracturing water volumes have been lacking. Water volumes used (injected) to hydraulically fracture over 263,859 oil and gas wells drilled between 2000 and 2014 were compiled and used to create the first U.S. map of hydraulic fracturing water use. Although median annual volumes of 15,275 m3 and 19,425 m3 of water per well was used to hydraulically fracture individual horizontal oil and gas wells, respectively, in 2014, about 42% of wells were actually either vertical or directional, which required less than 2600 m3 water per well. The highest average hydraulic fracturing water usage (10,000-36,620 m3 per well) in watersheds across the United States generally correlated with shale-gas areas (versus coalbed methane, tight oil, or tight gas) where the greatest proportion of hydraulically fractured wells were horizontally drilled, reflecting that the natural reservoir properties influence water use. This analysis also demonstrates that many oil and gas resources within a given basin are developed using a mix of horizontal, vertical, and some directional wells, explaining why large volume hydraulic fracturing water usage is not widespread. This spatial variability in hydraulic fracturing water use relates to the potential for environmental impacts such as water availability, water quality, wastewater disposal, and possible wastewater injection-induced earthquakes.

  1. Simulation of Hydraulic Fracture in Unsaturated Soils with High Degree of Saturation

    Directory of Open Access Journals (Sweden)

    Tielin Chen

    2014-01-01

    Full Text Available A numerical simulation approach of hydraulic fracture process, considering the couplings of the stress distribution, the fluid flow of the water-air mixture, the compression and dissolution of air, and the element damage evolution, has been developed to investigate the mechanisms of crack initiation and propagation in porous media during hydraulic fracturing. The concept of homogenized pore fluid has been adopted to represent the water air mixture. A large number of numerical analysis on hydraulic fracturing in clay with incipient injection slot have been carried out to study the mechanism of hydraulic fracturing in unsaturated soil with the characteristic of critical model I type of crack loading using stress intensity factor KIc. The results provide a numerical picture depicting the mechanisms of crack initiation and propagation during hydraulic fracturing. The numerical results are in good agreement with the experimental results, which confirms the adequacy and the power of the numerical approach.

  2. 77 FR 36273 - Public Meeting on Draft Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using...

    Science.gov (United States)

    2012-06-18

    ... AGENCY Public Meeting on Draft Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using... agency has developed on the use of diesel fuels in oil and gas hydraulic fracturing and to solicit input... discuss ``Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using Diesel...

  3. Hydraulic fracturing in cells and tissues: fracking meets cell biology.

    Science.gov (United States)

    Arroyo, Marino; Trepat, Xavier

    2016-12-06

    The animal body is largely made of water. A small fraction of body water is freely flowing in blood and lymph, but most of it is trapped in hydrogels such as the extracellular matrix (ECM), the cytoskeleton, and chromatin. Besides providing a medium for biological molecules to diffuse, water trapped in hydrogels plays a fundamental mechanical role. This role is well captured by the theory of poroelasticity, which explains how any deformation applied to a hydrogel causes pressure gradients and water flows, much like compressing a sponge squeezes water out of it. Here we review recent evidence that poroelastic pressures and flows can fracture essential biological barriers such as the nuclear envelope, the cellular cortex, and epithelial layers. This type of fracture is known in engineering literature as hydraulic fracturing or 'fracking'.

  4. Analytical and numerical simulations of a hydraulic fracturing experiment

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, M.Z.; Namiq, M.A.; Zhou, L.; Gou, Y. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. of Petroleum Engineering

    2008-10-23

    Based on simulations of a previously published hydraulic fracturing experiment performed by Casas et al. (2006), this paper presents the performance assessment of the famous analytical fracture 2D-models (PKN and KGD) and a 3D numerical model (FDM program FLAC3D of the ITASCA Inc.). Strain-softening models are used in the FLAC3D to describe the fracture creation and propagation as well as to present the material softening properties (permeability, tensile strength, cohesion, friction and dilation angel) as functions of the plastic strain. The results show that the numerical simulator has a much better performance and produces more reliable results than the analytical fracture models. However, numerical models have limitations and thus potential for further development. (orig.)

  5. Triaxial coreflood study of the hydraulic fracturing of Utica Shale

    Science.gov (United States)

    Carey, J. W.; Frash, L.; Viswanathan, H. S.

    2015-12-01

    One of the central questions in unconventional oil and gas production research is the cause of limited recovery of hydrocarbon. There are many hypotheses including: 1) inadequate penetration of fractures within the stimulated volume; 2) limited proppant delivery; 3) multiphase flow phenomena that blocks hydrocarbon migration; etc. Underlying any solution to this problem must be an understanding of the hydrologic properties of hydraulically fractured shale. In this study, we conduct triaxial coreflood experiments using a gasket sealing mechanism to characterize hydraulic fracture development and permeability of Utica Shale samples. Our approach also includes fracture propagation with proppants. The triaxial coreflood experiments were conducted with an integrated x-ray tomography system that allows direct observation of fracture development using x-ray video radiography and x-ray computed tomography at elevated pressure. A semi-circular, fracture initiation notch was cut into an end-face of the cylindrical samples (1"-diameter with lengths from 0.375 to 1"). The notch was aligned parallel with the x-ray beam to allow video radiography of fracture growth as a function of injection pressure. The proppants included tungsten powder that provided good x-ray contrast for tracing proppant delivery and distribution within the fracture system. Fractures were propagated at injection pressures in excess of the confining pressure and permeability measurements were made in samples where the fractures propagated through the length of the sample, ideally without penetrating the sample sides. Following fracture development, permeability was characterized as a function of hydrostatic pressure and injection pressure. X-ray video radioadiography was used to study changes in fracture aperture in relation to permeability and proppant embedment. X-ray tomography was collected at steady-state conditions to fully characterize fracture geometry and proppant distribution.

  6. Hydraulic fracturing research in east Texas; Third GRI staged field experiment

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, B.M. (S.A. Holditch and Associates, Inc. (US))

    1992-01-01

    This paper presents results from results from research conducted on the third Gas Research inst. (GRI) staged field experiment (SFE) well. Research well SFE No. 3 was drilled as part of a field-based research program conducted in east Texas during the past 7 years. Most of the work before SFE No. 3 involved the Travis Peak formation; however, the Cotton Valley sandstone was the primary research target for this well. SFE no. 3 is the last in a series of research wells planned for east Texas. A fourth SFE is being conducted in the Frontier formation of southwestern Wyoming. Data on SFE wells are collected from whole cores, openhole geophysical logs, in-situ stress measurements, production and pressure-transient tests, fracture stimulation treatments, fracture-diagnostic measurements, and postfracture performance tests. Test data then are analyzed by research scientists, geologists, and engineers to describe the reservoir and hydraulic fracture fully.

  7. Sustainable Management of Flowback Water during Hydraulic Fracturing of Marcellus Shale for Natural Gas Production

    Energy Technology Data Exchange (ETDEWEB)

    Vidic, Radisav [Univ. of Pittsburgh, PA (United States)

    2015-01-24

    This study evaluated the feasibility of using abandoned mine drainage (AMD) as make- up water for the reuse of produced water for hydraulic fracturing. There is an abundance of AMD sources near permitted gas wells as documented in this study that can not only serve as makeup water and reduce the demand on high quality water resources but can also as a source of chemicals to treat produced water prior to reuse. The assessment of AMD availability for this purpose based on proximity and relevant regulations was accompanied by bench- and pilot-scale studies to determine optimal treatment to achieve desired water quality for use in hydraulic fracturing. Sulfate ions that are often present in AMD at elevated levels will react with Ba²⁺ and Sr²⁺ in produced water to form insoluble sulfate compounds. Both membrane microfiltration and gravity separation were evaluated for the removal of solids formed as a result of mixing these two impaired waters. Laboratory studies revealed that neither AMD nor barite formed in solution had significant impact on membrane filtration but that some produced waters contained submicron particles that can cause severe fouling of microfiltration membrane. Coagulation/flocculation was found to be an effective process for the removal of suspended solids and both bench- and pilot-scale studies revealed that optimal process conditions can consistently achieve the turbidity of the finished water below 5 NTU. Adjusting the blending ratio of AMD and produced water can achieve the desired effluent sulfate concentration that can be accurately predicted by chemical thermodynamics. Co-treatment of produced water and AMD will result in elevated levels of naturally occurring radioactive materials (NORM) in the solid waste generated in this process due to radium co-precipitation with barium sulfate. Laboratory studies revealed that the mobility of barite that may form in the subsurface due to the presence of sulfate in the fracturing fluid can be

  8. Characterization of Hydraulic Fracture with Inflated Dislocation Moving Within a Semi-infinite Medium

    Institute of Scientific and Technical Information of China (English)

    OUYANG Zhi-hua; ELSWORTH Derek; LI Qiang

    2007-01-01

    Hydraulic fracturing is accompanied by a change in pore fluid pressure. As a result, this may be conveniently represented as inflated dislocation moving within a semi-infinite medium. Theory is developed to describe the pore pressures that build up around an inflated volumetric dislocation migrating within a saturated porous-elastic semi-infinite medium as analog to hydraulic fracturing emplacement. The solution is capable of evaluating the system behavior of both constant fluid pressure and zero flux surface conditions through application of a superposition. Characterization of horizontal moving dislocation processes is conducted as an application of these techniques. Where the mechanical and hydraulic parameters are defined, a priori, type curve matching of responses may be used to evaluate emplacement location uniquely. Pore pressure response elicited at a dilation, subject to pressure control is of interest in representing hydraulic fracturing where leak-off is an important component. The effect of hydraulic fracturing on fracture fluid pressure is evaluated in a poroelastic hydraulic fracture model utilizing dislocation theory. A minimum set of dimensionless parameters are defined that describe the system. Pore fluid pressures recorded during hydraulic fracturing of a well in the San Joaquin Valley of Central California is examined using the proposed model. The estimated geometry of the hydraulic fracture is matched with reasonable fidelity with the measured data.

  9. Field investigation into directional hydraulic fracturing for hard roof in Tashan Coal Mine

    Institute of Scientific and Technical Information of China (English)

    Bing-Xiang HUANG; Bin YU; Feng FENG; Zhao LI; You-Zhuang WANG; Jin-Rong LIU

    2013-01-01

    Research and development of safe and effective control technology of hard roof is an inevitable trend at present.Directional hydraulic fracturing technology is expected to become a safe and effective way to control and manage hard roof.In order to make hard roof fracture in a directional way,a hydraulic fracture field test has been conducted in the third panel district of Tashan Coal Mine in Datong.First,two hydraulic fracturing drilling holes and four observing drilling holes were arranged in the roof,followed by a wedge-shaped ring slot in each hydraulic fracturing drilling hole.The hydraulic fracturing holes were then sealed and,hydraulic fracturing was conducted.The results show that the hard roof is fractured directionally by the hydraulic fracturing function of the two fracturing drilling holes; the sudden drop,or the overall downward trend of hydraulic pressure from hydraulic monitoring is the proof that the rock in the hard roof has been fractured.The required hydraulic pressure to fracture the hard roof in Tashan coal mine,consisting of carboniferous sandstone layer,is 50.09 MPa,and the fracturing radius of a single drilling hole is not less than 10.5 m.The wedge-shaped ring slot made in the bottom of the hydraulic fracturing drilling hole plays a guiding role for crack propagation.After the hydraulic fracturing drill hole is cracked,the propagation of the resulting hydraulic crack,affected mainly by the regional stress field,will turn to other directions.

  10. In-situ stress from hydraulic fracture measurements in G Tunnel, Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.; Vollendorf, W. C.; Warren, W. E.

    1981-04-01

    Hydraulic fracture work in G Tunnel, Nevada Test Site, performed to obtain the in-situ stress state is discussed. Field equipment and procedures are described; analysis is developed to relate the hydraulic fracture pressures to the in-situ stress state. Pressure data are analyzed to provide estimates of the stress state at a number of locations in the tunnel complex. A unique feature of the work is the mineback - a mining process in which the rock is cut away to reveal the actual plane of the fracture. Advantages, limitations, and problem areas associated with extracting in-situ stress fields from hydraulic fracture pressure records are discussed in detail.

  11. A Thermoelastic Hydraulic Fracture Design Tool for Geothermal Reservoir Development

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad Ghassemi

    2003-06-30

    Geothermal energy is recovered by circulating water through heat exchange areas within a hot rock mass. Geothermal reservoir rock masses generally consist of igneous and metamorphic rocks that have low matrix permeability. Therefore, cracks and fractures play a significant role in extraction of geothermal energy by providing the major pathways for fluid flow and heat exchange. Thus, knowledge of conditions leading to formation of fractures and fracture networks is of paramount importance. Furthermore, in the absence of natural fractures or adequate connectivity, artificial fracture are created in the reservoir using hydraulic fracturing. At times, the practice aims to create a number of parallel fractures connecting a pair of wells. Multiple fractures are preferred because of the large size necessary when using only a single fracture. Although the basic idea is rather simple, hydraulic fracturing is a complex process involving interactions of high pressure fluid injections with a stressed hot rock mass, mechanical interaction of induced fractures with existing natural fractures, and the spatial and temporal variations of in-situ stress. As a result it is necessary to develop tools that can be used to study these interactions as an integral part of a comprehensive approach to geothermal reservoir development, particularly enhanced geothermal systems. In response to this need we have set out to develop advanced thermo-mechanical models for design of artificial fractures and rock fracture research in geothermal reservoirs. These models consider the significant hydraulic and thermo-mechanical processes and their interaction with the in-situ stress state. Wellbore failure and fracture initiation is studied using a model that fully couples poro-mechanical and thermo-mechanical effects. The fracture propagation model is based on a complex variable and regular displacement discontinuity formulations. In the complex variable approach the displacement discontinuities are

  12. Boundary element simulation of petroleum reservoirs with hydraulically fractured wells

    Science.gov (United States)

    Pecher, Radek

    The boundary element method is applied to solve the linear pressure-diffusion equation of fluid-flow in porous media. The governing parabolic partial differential equation is transformed into the Laplace space to obtain the elliptic modified-Helmholtz equation including the homogeneous initial condition. The free- space Green's functions, satisfying this equation for anisotropic media in two and three dimensions, are combined with the generalized form of the Green's second identity. The resulting boundary integral equation is solved by following the collocation technique and applying the given time-dependent boundary conditions of the Dirichlet or Neumann type. The boundary integrals are approximated by the Gaussian quadrature along each element of the discretized domain boundary. Heterogeneous regions are represented by the sectionally-homogeneous zones of different rock and fluid properties. The final values of the interior pressure and velocity fields and of their time-derivatives are found by numerically inverting the solutions from the Laplace space by using the Stehfest's algorithm. The main extension of the mostly standard BEM-procedure is achieved in the modelling of the production and injection wells represented by internal sources and sinks. They are treated as part of the boundary by means of special single-node and both-sided elements, corresponding to the line and plane sources respectively. The wellbore skin and storage effects are considered for the line and cylindrical sources. Hydraulically fractured wells of infinite conductivity are handled directly according to the specified constraint type, out of the four alternatives. Fractures of finite conductivity are simulated by coupling the finite element model of their 1D-interior with the boundary element model of their 2D- exterior. Variable fracture width, fractures crossing zone boundaries, ``networking'' of fractures, fracture-tip singularity handling, or the 3D-description are additional advanced

  13. Regulation of Water Pollution from Hydraulic Fracturing in Horizontally-Drilled Wells in the Marcellus Shale Region, USA

    Directory of Open Access Journals (Sweden)

    Heather Hatzenbuhler

    2012-12-01

    Full Text Available Hydraulic fracturing is an industrial process used to extract fossil fuel reserves that lie deep underground. With the introduction of horizontal drilling, new commercial sources of energy have become available. Wells are drilled and injected with large quantities of water mixed with specially selected chemicals at high pressures that allow petroleum reserves to flow to the surface. While the increased economic activities and the outputs of domestic energy are welcomed, there is growing concern over negative environmental impacts from horizontal drilling in shale formations. The potential for water contamination, land destruction, air pollution, and geologic disruption has raised concerns about the merits of production activities used during extraction. This paper looks at the impacts of horizontal drilling using hydraulic fracturing on water supplies and takes a comprehensive look at legislative and regulatory approaches to mitigate environmental risks in the Marcellus shale region. The overview identifies shortcomings associated with regulatory controls by local and state governments and offers two policy suggestions to better protect waters of the region.

  14. Analysis of Proppant Hydraulic Fracturing in a Sand Oil Reservoir in Southwest of Iran

    Directory of Open Access Journals (Sweden)

    Reza Masoomi

    2015-10-01

    Full Text Available Hydraulic fracturing is one way to increase the productivity of oil and gas wells. One of the most fundamental successes of hydraulic fracturing operation is selecting the proper size and type of proppants which are used during the process. The aim of this study is optimizing the type and size of used propant in hydraulic fracturing operation in a sand oil reservoir in southwest of Iran. In this study sand and ceramic (sintered bauxite have been considered as proppant type. Also the various types of resin-coated sand and resin-coated ceramic have been considered. Then the various scenarios have been designed to optimize the size and type of proppant used in hydraulic fracturing in a sand oil reservoir in southwest of Iran. Also in this study increasing the cumulative oil recovery in fractured and Non-fractured wells in a sand oil reservoir in southwest of Iran have been investigated.

  15. EPA Releases Draft Assessment on the Potential Impacts to Drinking Water Resources from Hydraulic Fracturing Activities

    Science.gov (United States)

    WASHINGTON-The Environmental Protection Agency (EPA) is releasing a draft assessment today on the potential impacts of hydraulic fracturing activities on drinking water resources in the United States. The assessment, done at the request of Congress, shows

  16. Numerical analysis of fracture propagation during hydraulic fracturing operations in shale gas systems

    Science.gov (United States)

    Researchers used the TOUGH+ geomechanics computational software and simulation system to examine the likelihood of hydraulic fracture propagation (the spread of fractures) traveling long distances to connect with drinking water aquifers.

  17. A review of numerical simulation strategies for hydraulic fracturing, natural fracture reactivation and induced microseismicity prediction

    NARCIS (Netherlands)

    Shahid, A.S.A.; Fokker, P.A.; Rocca, V.

    2016-01-01

    Hydraulic fracturing, natural fracture reactivation and resulting induced microseismicity are interconnected phenomena involved in shale gas exploitation. Due to their multi-physics and their complexity, deep understanding of these phenomena as well as their mutual interaction require the adoption

  18. Solution of hydraulic fracture problem accounting for lag

    CERN Document Server

    Linkov, Alexander M

    2014-01-01

    The paper presents a method for solving hydraulic fracture problems accounting for the lag. The method consists in matching the outer (basic) solution neglecting the lag, with the inner (auxiliary) solution of the derived 1D integral equation with conditions, accounting for the lag and asymptotic behavior of the opening and the net-pressure. The method refers to practically important cases, when the influence of the local perturbation, caused by the lag, becomes insignificant at a distance, where the leading plane-state asymptotics near the fracture front is still applicable. The universal asymptotics are used for finding the matching constants of the basic (outer) solution and for formulation of matching condition for the solution of inner (auxiliary) problem. The method is illustrated by the solution of the Spence and Sharp plane-strain problem for a fracture propagating symmetrically from the inlet, where a Newtonian fluid is pumped at a constant rate. It is stated that the method developed for deep fractu...

  19. Implicit level set algorithms for modelling hydraulic fracture propagation.

    Science.gov (United States)

    Peirce, A

    2016-10-13

    Hydraulic fractures are tensile cracks that propagate in pre-stressed solid media due to the injection of a viscous fluid. Developing numerical schemes to model the propagation of these fractures is particularly challenging due to the degenerate, hypersingular nature of the coupled integro-partial differential equations. These equations typically involve a singular free boundary whose velocity can only be determined by evaluating a distinguished limit. This review paper describes a class of numerical schemes that have been developed to use the multiscale asymptotic behaviour typically encountered near the fracture boundary as multiple physical processes compete to determine the evolution of the fracture. The fundamental concepts of locating the free boundary using the tip asymptotics and imposing the tip asymptotic behaviour in a weak form are illustrated in two quite different formulations of the governing equations. These formulations are the displacement discontinuity boundary integral method and the extended finite-element method. Practical issues are also discussed, including new models for proppant transport able to capture 'tip screen-out'; efficient numerical schemes to solve the coupled nonlinear equations; and fast methods to solve resulting linear systems. Numerical examples are provided to illustrate the performance of the numerical schemes. We conclude the paper with open questions for further research. This article is part of the themed issue 'Energy and the subsurface'.

  20. IMPACT OF HYDRAULIC FRACTURING ON THE QUALITY OF NATURAL WATERS

    Directory of Open Access Journals (Sweden)

    Wojciech Cel

    2017-03-01

    Full Text Available Poland, due to the estimated shale gas deposits amounting to 346-768 billion m3 has become one of the most attractive regions for shale gas exploration in Europe. Throughout the period 2010-2015, 72 exploratory drillings have been made (as of 4.01.2016 while hydraulic fracturing was carried out 25 times. Employing new drilling and shale gas prospecting technologies raises a question pertaining to their impact on the environment. The number of chemical compounds used (approximately 2000 for the production of new technological fluids may potentially pollute the environment. The fact that the composition of these fluids remains undisclosed hinders the assessment of their impact on the environment and devising optimal methods for managing this type of waste. The presented work indicates the chemical compounds which may infiltrate to groundwater, identified on the basis of technological fluids characteristics, as well as the review of studies pertaining to their impact on potable water carried out in the United States. The study focused on marking heavy metals, calcium, sodium, magnesium, potassium, chlorides and sulphates in the surface waters collected in proximity of Lewino well.

  1. Development of an Advanced Hydraulic Fracture Mapping System

    Energy Technology Data Exchange (ETDEWEB)

    Norm Warpinski; Steve Wolhart; Larry Griffin; Eric Davis

    2007-01-31

    The project to develop an advanced hydraulic fracture mapping system consisted of both hardware and analysis components in an effort to build, field, and analyze combined data from tiltmeter and microseismic arrays. The hardware sections of the project included: (1) the building of new tiltmeter housings with feedthroughs for use in conjunction with a microseismic array, (2) the development of a means to use separate telemetry systems for the tilt and microseismic arrays, and (3) the selection and fabrication of an accelerometer sensor system to improve signal-to-noise ratios. The analysis sections of the project included a joint inversion for analysis and interpretation of combined tiltmeter and microseismic data and improved methods for extracting slippage planes and other reservoir information from the microseisms. In addition, testing was performed at various steps in the process to assess the data quality and problems/issues that arose during various parts of the project. A prototype array was successfully tested and a full array is now being fabricated for industrial use.

  2. Coupled Fracture and Flow in Shale in Hydraulic Fracturing

    Science.gov (United States)

    Carey, J. W.; Mori, H.; Viswanathan, H.

    2014-12-01

    Production of hydrocarbon from shale requires creation and maintenance of fracture permeability in an otherwise impermeable shale matrix. In this study, we use a combination of triaxial coreflood experiments and x-ray tomography characterization to investigate the fracture-permeability behavior of Utica shale at in situ reservoir conditions (25-50 oC and 35-120 bars). Initially impermeable shale core was placed between flat anvils (compression) or between split anvils (pure shear) and loaded until failure in the triaxial device. Permeability was monitored continuously during this process. Significant deformation (>1%) was required to generate a transmissive fracture system. Permeability generally peaked at the point of a distinct failure event and then dropped by a factor of 2-6 when the system returned to hydrostatic failure. Permeability was very small in compression experiments (conformed to Forscheimer's law. The coupled deformation and flow behavior of Utica shale, particularly the large deformation required to initiate flow, indicates the probable importance of activation of existing fractures in hydraulic fracturing and that these fractures can have adequate permeability for the production of hydrocarbon.

  3. Analytic crack solutions for tilt fields around hydraulic fractures

    Energy Technology Data Exchange (ETDEWEB)

    Warpinski, N.R.

    2000-01-05

    The recent development of downhole tiltmeter arrays for monitoring hydraulic fractures has provided new information on fracture growth and geometry. These downhole arrays offer the significant advantages of being close to the fracture (large signal) and being unaffected by the free surface. As with surface tiltmeter data, analysis of these measurements requires the inversion of a crack or dislocation model. To supplement the dislocation models of Davis [1983], Okada [1992] and others, this work has extended several elastic crack solutions to provide tilt calculations. The solutions include constant-pressure 2D, penny-shaped, and 3D-elliptic cracks and a 2D-variable-pressure crack. Equations are developed for an arbitrary inclined fracture in an infinite elastic space. Effects of fracture height, fracture length, fracture dip, fracture azimuth, fracture width and monitoring distance on the tilt distribution are given, as well as comparisons with the dislocation model. The results show that the tilt measurements are very sensitive to the fracture dimensions, but also that it is difficult to separate the competing effects of the various parameters.

  4. A Graph Theoretic Approach for Hydraulic Fracturing and Wellbore Leakage Risk Modeling

    Science.gov (United States)

    Glosser, D.; Rose, K.; Bauer, J. R.; Warner, T.

    2016-12-01

    Recent large scale development of unconventional formations for fossil energy has raised concerns over the potential for fluid leakage between subsurface systems and wellbores. This is particularly true in regions with extensive drilling history, where spatial densities of wellbores are higher, and where significant uncertainties in the location and mechanical integrity of such wellbores exist. The generation of induced fracture networks during hydraulic fracturing may increase subsurface connectivity, and create the potential for unwanted fluid migration between operational and legacy wellbores and subsurface fracture networks. We present a graph theoretic approach for identifying geospatial regions and wellbores at increased risk for subsurface connectivity based on wellbore proximity and local geologic characteristics. The algorithm transforms user inputted geospatial data (geologic and wellbore x,y,z) to graph structure, where wellbores are represented as nodes, and where potential overlapping fracture network zones are represented as edges. The algorithm can be used to complement existing fracture models to better account for the reach of induced fractures, and to identify spatial extents at increased risk for unwanted subsurface connectivity. Additionally, the model can be used to identify regions in need of geophysical detection methods for locating undocumented wells. As a result, the method can be part of a cumulative strategy to reduce uncertainty inherent to combined geologic and engineered systems. The algorithm has been successfully tested against a known leakage scenario in Pennsylvania. In addition to identifying wells associated with the leakage event, the algorithm identified two other higher risk networks in the region. The algorithm output provides valuable information for industry to develop environmentally safe drilling and injection plans; and for regulators to identify specific wellbores at greater risk for leakage, and to develop targeted

  5. Experimental Investigation on the Basic Law of Hydraulic Fracturing After Water Pressure Control Blasting

    Science.gov (United States)

    Huang, Bingxiang; Li, Pengfeng; Ma, Jian; Chen, Shuliang

    2014-07-01

    Because of the advantages of integrating water pressure blasting and hydraulic fracturing, the use of hydraulic fracturing after water pressure control blasting is a method that is used to fully transform the structure of a coal-rock mass by increasing the number and range of hydraulic cracks. An experiment to study hydraulic fracturing after water pressure blasting on cement mortar samples (300 × 300 × 300 mm3) was conducted using a large-sized true triaxial hydraulic fracturing experimental system. A traditional hydraulic fracturing experiment was also performed for comparison. The experimental results show that water pressure blasting produces many blasting cracks, and follow-up hydraulic fracturing forces blasting cracks to propagate further and to form numerous multidirectional hydraulic cracks. Four macroscopic main hydraulic cracks in total were noted along the borehole axial and radial directions on the sample surfaces. Axial and radial main failure planes induced by macroscopic main hydraulic cracks split the sample into three big parts. Meanwhile, numerous local hydraulic cracks were formed on the main failure planes, in different directions and of different types. Local hydraulic cracks are mainly of three types: local hydraulic crack bands, local branched hydraulic cracks, and axial layered cracks. Because local hydraulic cracks produce multiple local layered failure planes and lamellar ruptures inside the sample, the integrity of the sample decreases greatly. The formation and propagation process of many multidirectional hydraulic cracks is affected by a combination of water pressure blasting, water pressure of fracturing, and the stress field of the surrounding rock. To a certain degree, the stress field of surrounding rock guides the formation and propagation process of the blasting crack and the follow-up hydraulic crack. Following hydraulic fracturing that has been conducted after water pressure blasting, the integrity of the sample is found to

  6. Multi-hazard risk assessment applied to hydraulic fracturing operations

    Science.gov (United States)

    Garcia-Aristizabal, Alexander; Gasparini, Paolo; Russo, Raffaella; Capuano, Paolo

    2017-04-01

    Without exception, the exploitation of any energy resource produces impacts and intrinsically bears risks. Therefore, to make sound decisions about future energy resource exploitation, it is important to clearly understand the potential environmental impacts in the full life-cycle of an energy development project, distinguishing between the specific impacts intrinsically related to exploiting a given energy resource and those shared with the exploitation of other energy resources. Technological advances as directional drilling and hydraulic fracturing have led to a rapid expansion of unconventional resources (UR) exploration and exploitation; as a consequence, both public health and environmental concerns have risen. The main objective of a multi-hazard risk assessment applied to the development of UR is to assess the rate (or the likelihood) of occurrence of incidents and the relative potential impacts on surrounding environment, considering different hazards and their interactions. Such analyses have to be performed considering the different stages of development of a project; however, the discussion in this paper is mainly focused on the analysis applied to the hydraulic fracturing stage of a UR development project. The multi-hazard risk assessment applied to the development of UR poses a number of challenges, making of this one a particularly complex problem. First, a number of external hazards might be considered as potential triggering mechanisms. Such hazards can be either of natural origin or anthropogenic events caused by the same industrial activities. Second, failures might propagate through the industrial elements, leading to complex scenarios according to the layout of the industrial site. Third, there is a number of potential risk receptors, ranging from environmental elements (as the air, soil, surface water, or groundwater) to local communities and ecosystems. The multi-hazard risk approach for this problem is set by considering multiple hazards

  7. Hydraulic fracturing for natural gas: impact on health and environment.

    Science.gov (United States)

    Carpenter, David O

    2016-03-01

    Shale deposits exist in many parts of the world and contain relatively large amounts of natural gas and oil. Recent technological developments in the process of horizontal hydraulic fracturing (hydrofracturing or fracking) have suddenly made it economically feasible to extract natural gas from shale. While natural gas is a much cleaner burning fuel than coal, there are a number of significant threats to human health from the extraction process as currently practiced. There are immediate threats to health resulting from air pollution from volatile organic compounds, which contain carcinogens such as benzene and ethyl-benzene, and which have adverse neurologic and respiratory effects. Hydrogen sulfide, a component of natural gas, is a potent neuro- and respiratory toxin. In addition, levels of formaldehyde are elevated around fracking sites due to truck traffic and conversion of methane to formaldehyde by sunlight. There are major concerns about water contamination because the chemicals used can get into both ground and surface water. Much of the produced water (up to 40% of what is injected) comes back out of the gas well with significant radioactivity because radium in subsurface rock is relatively water soluble. There are significant long-term threats beyond cancer, including exacerbation of climate change due to the release of methane into the atmosphere, and increased earthquake activity due to disruption of subsurface tectonic plates. While fracking for natural gas has significant economic benefits, and while natural gas is theoretically a better fossil fuel as compared to coal and oil, current fracking practices pose significant adverse health effects to workers and near-by residents. The health of the public should not be compromized simply for the economic benefits to the industry.

  8. Advanced hydraulic fracturing methods to create in situ reactive barriers

    Energy Technology Data Exchange (ETDEWEB)

    Murdoch, L. [FRx Inc., Cincinnati, OH (United States)]|[Clemson Univ., SC (United States); Siegrist, B. [Oak Ridge National Lab., TN (United States); Vesper, S. [Univ. of Cincinnati, OH (United States)] [and others

    1997-12-31

    Many contaminated areas consist of a source area and a plume. In the source area, the contaminant moves vertically downward from a release point through the vadose zone to an underlying saturated region. Where contaminants are organic liquids, NAPL may accumulate on the water table, or it may continue to migrate downward through the saturated region. Early developments of permeable barrier technology have focused on intercepting horizontally moving plumes with vertical structures, such as trenches, filled with reactive material capable of immobilizing or degrading dissolved contaminants. This focus resulted in part from a need to economically treat the potentially large volumes of contaminated water in a plume, and in part from the availability of construction technology to create the vertical structures that could house reactive compounds. Contaminant source areas, however, have thus far remained largely excluded from the application of permeable barrier technology. One reason for this is the lack of conventional construction methods for creating suitable horizontal structures that would place reactive materials in the path of downward-moving contaminants. Methods of hydraulic fracturing have been widely used to create flat-lying to gently dipping layers of granular material in unconsolidated sediments. Most applications thus far have involved filling fractures with coarse-grained sand to create permeable layers that will increase the discharge of wells recovering contaminated water or vapor. However, it is possible to fill fractures with other compounds that alter the chemical composition of the subsurface. One early application involved development and field testing micro-encapsulated sodium percarbonate, a solid compound that releases oxygen and can create aerobic conditions suitable for biodegradation in the subsurface for several months.

  9. Experiment on Hydraulic Fracturing in Rock and Induced Earthquake

    Institute of Scientific and Technical Information of China (English)

    Yan Yuding; Li Yalin; Zhang Zhuan; Ouyang Lisheng; Xie Mingfu

    2005-01-01

    Experiment on rock hydraulic fracturing strength under different confining pressures was conducted on a series of test specimens with various pre-cracks prepared from 7 types of rock.Combining the data of an actual reservoir-induced earthquake with the experimental results of the contemporary tectonic stress field according to the theory of rock strength and the principle and method of rock fracture mechanics, the authors tentatively investigated the earthquakes induced by pore-water pressure in rock and obtained the initial results as follows: ( 1 ) One type of induced earthquake may occur in the case of larger tectonic stress on such weak planes that strike in similar orientation of principle tectonic compressional stress in the shallows of the rock mass; the pore-water pressure σp may generate tensile fracture on them and induce small earthquakes; (2) Two types of induced earthquake may occur in the case of larger tectonic stress, i.e., ① on such weakness planes that strike in similar orientation of principle tectonic compressioual stress, σ1, in the shallows of the rockmass, the pore-water pressure, σp, may generate tensile fracture on them and induce small earthquakes; ② When the tectonic stress approximates the shear strength of the fracture, the pore-water pressure σp may reduce the normal stress, σn, on the fracture face causing failure of the originally stable fracture,producing gliding fracture and thus inducing an earthquake. σp may also increase the fracture depth, leading to an induced earthquake with the magnitude larger than the previous potential magnitude; (3) There is a depth limit for each type of rock mass, and no induced earthquake will occur beyond this limit.

  10. Overcoming tortuosity in hydraulic fracture operations in the Pilar Field, Alagoas, Brazil; Operacoes de fraturamento hidraulico no Campo de Pilar, Alagoas

    Energy Technology Data Exchange (ETDEWEB)

    Payao, Edson da C. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Gomes, Luiz A.Q.M.; Araujo, Josue de S. [Schlumberger, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The growing demand of natural gas by the industries in the Northeast of Brazil is the main drive for the conversion campaign witnessed in the oil wells producing at marginal rates from the Coqueiro Seco formation in the Pilar field, State of Alagoas, to gas wells producing from the deep Penedo reservoir, with total depths in the vicinity of 3500 meters. One of the important steps for increasing natural gas production in the Pilar field is the hydraulic fracturing operations in the Penedo formation. The process of creating these fractures show a distinct behavior from the treatments performed in the shallow Coqueiro Seco formation, aiming at improved oil productivity. This paper describes the completion strategy for the wells converted from oil to gas producers, highlighting the problems faced and overcome during the hydraulic fracture treatments. In deviated wells crossing the deep Penedo reservoir, the risk of multiple fractures and influence of tortuosity have been diminished through corrective techniques, unique for each one of the existing wells. In the early hydraulic fracture treatments performed in the Pilar field, premature screen-outs were commonplace, disencouraging the use of the technique. The need to produce gas brought new ideas to the battlefield, and their implementation led to results beyond expectations. (author)

  11. Overcoming tortuosity in hydraulic fracture operations in the Pilar Field, Alagoas, Brazil; Operacoes de fraturamento hidraulico no Campo de Pilar, Alagoas

    Energy Technology Data Exchange (ETDEWEB)

    Payao, Edson da C. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Gomes, Luiz A.Q.M.; Araujo, Josue de S. [Schlumberger, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The growing demand of natural gas by the industries in the Northeast of Brazil is the main drive for the conversion campaign witnessed in the oil wells producing at marginal rates from the Coqueiro Seco formation in the Pilar field, State of Alagoas, to gas wells producing from the deep Penedo reservoir, with total depths in the vicinity of 3500 meters. One of the important steps for increasing natural gas production in the Pilar field is the hydraulic fracturing operations in the Penedo formation. The process of creating these fractures show a distinct behavior from the treatments performed in the shallow Coqueiro Seco formation, aiming at improved oil productivity. This paper describes the completion strategy for the wells converted from oil to gas producers, highlighting the problems faced and overcome during the hydraulic fracture treatments. In deviated wells crossing the deep Penedo reservoir, the risk of multiple fractures and influence of tortuosity have been diminished through corrective techniques, unique for each one of the existing wells. In the early hydraulic fracture treatments performed in the Pilar field, premature screen-outs were commonplace, disencouraging the use of the technique. The need to produce gas brought new ideas to the battlefield, and their implementation led to results beyond expectations. (author)

  12. Hydraulic Fracture Propagation Through an Orthogonal Discontinuity: A Laboratory, Analytical and Numerical Study

    Science.gov (United States)

    Llanos, Ella María; Jeffrey, Robert G.; Hillis, Richard; Zhang, Xi

    2017-08-01

    Rocks are naturally fractured, and lack of knowledge of hydraulic fracture growth through the pre-existing discontinuities in rocks has impeded enhancing hydrocarbon extraction. This paper presents experimental results from uniaxial and biaxial tests, combined with numerical and analytical modelling results to develop a criterion for predicting whether a hydraulic fracture will cross a discontinuity, represented at the laboratory by unbonded machined frictional interfaces. The experimental results provide the first evidence for the impact of viscous fluid flow on the orthogonal fracture crossing. The fracture elliptical footprint also reflects the importance of both the applied loading stress and the viscosity in fracture propagation. The hydraulic fractures extend both in the direction of maximum compressive stress and in the direction with discontinuities that are arranged to be normal to the maximum compressive stress. The modelling results of fracture growth across discontinuities are obtained for the locations of slip starting points in initiating fracture crossing. Our analysis, in contrast to previous work on the prediction of frictional crossing, includes the non-singular stresses generated by the finite pressurised hydraulic fracture. Experimental and theoretical outcomes herein suggest that hydraulic fracture growth through an orthogonal discontinuity does not depend primarily on the interface friction coefficient.

  13. Selection of the optimal completion of horizontal wells with multi-stage hydraulic fracturing of the low-permeable formation, field C

    Science.gov (United States)

    Bozoev, A. M.; Demidova, E. A.

    2016-03-01

    At the moment, many fields of Western Siberia are in the later stages of development. In this regard, the multilayer fields are actually involved in the development of hard to recover reserves by conducting well interventions. However, most of these assets may not to be economical profitable without application of horizontal drilling and multi-stage hydraulic fracturing treatment. Moreover, location of frac ports in relative to each other, number of stages, volume of proppant per one stage are the main issues due to the fact that the interference effect could lead to the loss of oil production. The optimal arrangement of horizontal wells with multi-stage hydraulic fracture was defined in this paper. Several analytical approaches have been used to predict the started oil flow rate and chose the most appropriate for field C reservoir J1. However, none of the analytical equations could not take into account the interference effect and determine the optimum number of fractures. Therefore, the simulation modelling was used. Finally, the universal equation is derived for this field C, the reservoir J1. This tool could be used to predict the flow rate of the horizontal well with hydraulic fracturing treatment on the qualitative level without simulation model.

  14. The Critical Flow back Velocity in Hydraulic-Fracturing Shale Gas Wells

    Directory of Open Access Journals (Sweden)

    Zheng Zhang

    2016-02-01

    Full Text Available The loss of prop pant during the flow back process in hydraulic fracturing treatments has been a problem for many years. The effectiveness of the fracture treatment is reduced. A well cleanup is often required to remove the unwanted proppant from the wellbore to re-establish production. Among several techniques available to reduce the prop pant loss, controlling flow back velocity within a critical range is an essential measure. The objective of this study is to determine the critical flow back velocity under different confining pressures in the propped fractures of different thicknesses. This objective is achieved based experimental studies conducted in a specially designed apparatus. For a fracture with a given width, the closure stress helps hold the proppant in place. This is due to the friction force that is proportional to the normal force created by the closure stress. The critical flow back velocity necessary to mobilize the proppant therefore increases with closure stress. However, the stress effect may be influenced by the shape of solid particles and friction coefficient of solid. Under the condition of constant closure stress, a narrow fracture holds proppant better than a wide fracture, resulting in increased critical flow back velocity. This is interpreted to be due to the “tighter” packing of proppant in narrow fractures.

  15. Numerical simulation of surface and downhole deformation induced by hydraulic fracturing

    Institute of Scientific and Technical Information of China (English)

    He Yi-Yuan; Zhang Bao-Ping; Duan Yu-Ting; Xue Cheng-Jin; Yan Xin; He Chuan; Hu Tian-Yue

    2014-01-01

    Tiltmeter mapping technology infers hydraulic fracture geometry by measuring fracture-induced rock deformation, which recorded by highly sensitive tiltmeters placed at the surface and in nearby observation wells. By referencing Okada’s linear elastic theory and Green’s function method, we simulate and analyze the surface and downhole deformation caused by hydraulic fracturing using the homogeneous elastic half-space model and layered elastic model. Simulation results suggest that there is not much difference in the surface deformation patterns between the two models, but there is a significant difference in the downhole deformation patterns when hydraulic fracturing penetrates a stratum. In such cases, it is not suitable to assume uniform elastic half-space when calculating the downhole deformation. This work may improve the accuracy and reliability of the inversion results of tiltmeter monitoring data.

  16. A fully-coupled geomechanics and flow model for hydraulic fracturing and reservoir engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Charoenwongsa, S.; Kazemi, H.; Miskimins, J.; Fakcharoenphol [Colorado School of Mines, Golden, CO (United States)

    2010-07-01

    A fully coupled geomechanics flow model was used to assess how the changes in pore pressure and temperature influence rock stresses in tight gas reservoirs. The finite difference method was used to develop simulations for phases, components, and thermal stresses. A wave component was used to model the propagation of the strain displacement front as well as changes in stress with time. Fluid and heat flow volumes were modelled separately from rock formation properties. The influence of hydraulic fracturing on stress distributions surrounding the fracture was investigated as well as the effect of filter cake and filtrate. Results of the study showed that significant changes in shear stresses near hydraulic fractures occur as a result of hydraulic fracture face displacement perpendicular to the fracture face. While temperature effects also caused changes in stress distributions, changes in pore pressure did not significantly impact shear stresses as the filtrate did not travel very far into the reservoir. 17 refs., 17 figs.

  17. Geochemical simulation of fluid rock interactions to predict flowback water compostions during hydraulic fracturing

    Science.gov (United States)

    Kühn, Michael; Vieth-Hillebrand, Andrea; Wilke, Franziska D. H.

    2017-04-01

    Black shales are a heterogeneous mixture of minerals, organic matter and formation water and little is actually known about the fluid-rock interactions during hydraulic fracturing and their effects on composition of flowback and produced water. Geochemical simulations have been performed based on the analyses of "real" flowback water samples and artificial stimulation fluids from lab experiments with the aim to set up a chemical process model for shale gas reservoirs. Prediction of flowback water compositions for potential or already chosen sites requires validated and parameterized geochemical models. For the software "Geochemist's Workbench" (GWB) data bases are adapted and amended based on a literature review. Evaluation of the system has been performed in comparison with the results from laboratory experiments. Parameterization was done in regard to field data provided. Finally, reaction path models are applied for quantitative information about the mobility of compounds in specific settings. Our work leads to quantitative estimates of reservoir compounds in the flowback based on calibrations by laboratory experiments. Such information is crucial for the assessment of environmental impacts as well as to estimate human- and ecotoxicological effects of the flowback waters from a variety of natural gas shales. With a comprehensive knowledge about potential composition and mobility of flowback water, selection of water treatment techniques will become easier.

  18. Identifying chemicals of concern in hydraulic fracturing fluids used for oil production.

    Science.gov (United States)

    Stringfellow, William T; Camarillo, Mary Kay; Domen, Jeremy K; Sandelin, Whitney L; Varadharajan, Charuleka; Jordan, Preston D; Reagan, Matthew T; Cooley, Heather; Heberger, Matthew G; Birkholzer, Jens T

    2017-01-01

    Chemical additives used for hydraulic fracturing and matrix acidizing of oil reservoirs were reviewed and priority chemicals of concern needing further environmental risk assessment, treatment demonstration, or evaluation of occupational hazards were identified. We evaluated chemical additives used for well stimulation in California, the third largest oil producing state in the USA, by the mass and frequency of use, as well as toxicity. The most frequently used chemical additives in oil development were gelling agents, cross-linkers, breakers, clay control agents, iron and scale control agents, corrosion inhibitors, biocides, and various impurities and product stabilizers used as part of commercial mixtures. Hydrochloric and hydrofluoric acids, used for matrix acidizing and other purposes, were reported infrequently. A large number and mass of solvents and surface active agents were used, including quaternary ammonia compounds (QACs) and nonionic surfactants. Acute toxicity was evaluated and many chemicals with low hazard to mammals were identified as potentially hazardous to aquatic environments. Based on an analysis of quantities used, toxicity, and lack of adequate hazard evaluation, QACs, biocides, and corrosion inhibitors were identified as priority chemicals of concern that deserve further investigation.

  19. Automated method for determining the flow of surface functionalized nanoparticles through a hydraulically fractured mineral formation using plasmonic silver nanoparticles.

    Science.gov (United States)

    Maguire-Boyle, Samuel J; Garner, David J; Heimann, Jessica E; Gao, Lucy; Orbaek, Alvin W; Barron, Andrew R

    2014-02-01

    Quantifying nanoparticle (NP) transport within porous geological media is imperative in the design of tracers and sensors to monitor the environmental impact of hydraulic fracturing that has seen increasing concern over recent years, in particular the potential pollution and contamination of aquifers. The surface chemistry of a NP defining many of its solubility and transport properties means that there is a wide range of functionality that it is desirable to screen for optimum transport. Most prior transport methods are limited in determining if significant adsorption occurs of a NP over a limited column distance, however, translating this to effects over large distances is difficult. Herein we report an automated method that allows for the simulation of adsorption effects of a dilute nanoparticle solution over large distances under a range of solution parameters. Using plasmonic silver NPs and UV-visible spectroscopic detection allows for low concentrations to be used while offering greater consistency in peak absorbance leading to a higher degree of data reliability and statistics. As an example, breakthrough curves were determined for mercaptosuccinic acid (MSA) and cysteamine (CYS) functionalized Ag NPs passing through Ottawa sand (typical proppant material) immobile phase (C) or bypassing the immobile phase (C0). Automation allows for multiple sequences such that the absorption plateau after each breakthrough and the rate of breakthrough can be compared for multiple runs to provide statistical analysis. The mobility of the NPs as a function of pH is readily determined. The stickiness (α) of the NP to the immobile phase calculated from the C/C0 ratio shows that MSA-Ag NPs show good mobility, with a slight decrease around neutral pH, while CYS-Ag NPs shows an almost sinusoidal variation. The automated process described herein allows for rapid screening of NP functionality, as a function of immobile phase (proppant versus reservoir material), hydraulic

  20. Draft Genome Sequence of Methanohalophilus mahii Strain DAL1 Reconstructed from a Hydraulic Fracturing-Produced Water Metagenome

    Science.gov (United States)

    Lipus, Daniel; Vikram, Amit

    2016-01-01

    We report here the 1,882,100-bp draft genome sequence of Methanohalophilus mahii strain DAL1, recovered from Marcellus Shale hydraulic fracturing-produced water using metagenomic contig binning. Genome annotation revealed several key methanogenesis genes and provides valuable information on archaeal activity associated with hydraulic fracturing-produced water environments. PMID:27587817

  1. Hydraulic fracturing as an interpretive policy problem: lessons on energy controversies in Europe and the U.S.A.

    NARCIS (Netherlands)

    Dodge, Jennifer; Metze, Tamara

    2017-01-01

    This special issue addresses hydraulic fracturing for shale gas extraction as an interpretive policy problem. Bringing together empirical cases from the U.S.A., the Netherlands, the U.K., Poland, and Germany, we identify three approaches to the interpretation of hydraulic fracturing in the article:

  2. Risks to Water Resources from Shale Gas Development and Hydraulic Fracturing in the United States

    Science.gov (United States)

    Vengosh, Avner; Jackson, Robert B.; Warner, Nathaniel; Darrah, Thomas H.; Kondash, Andrew

    2014-05-01

    The rise of shale gas development through horizontal drilling and high volume hydraulic fracturing has expanded oil and gas exploration in the USA. The rapid rate of shale gas exploration has triggered an intense public debate regarding the potential environmental and human health effects. A review of the updated literature has identified four potential risks for impacts on water resources: (1) stray gas contamination of shallow aquifers near shale gas sites; (2) contamination of surface water and shallow groundwater from spills, leaks, and disposal of inadequately treated wastewater or hydraulic fracturing fluids; (3) accumulation of toxic and radioactive residues in soil or stream sediments near disposal or spill sites; and (4) over-extraction of water resources for drilling and hydraulic fracturing that could induce water shortages and conflicts with other water users, particularly in water-scarce areas. As part of a long-term research on the potential water contamination associated with shale gas development, new geochemical and isotopic techniques have been developed for delineating the origin of gases and contaminants in water resource. In particular, multiple geochemical and isotopic (carbon isotopes in hydrocarbons, noble gas, strontium, boron, radium isotopes) tracers have been utilized to distinguish between naturally occurring dissolved gas and salts in water and contamination directly induced from shale gas drilling and hydraulic fracturing operations.

  3. Theory and application of rock burst prevention using deep hole high pressure hydraulic fracturing

    Institute of Scientific and Technical Information of China (English)

    Shan-Kun ZHAO; Jun LIU; Xiang-Zhi WEI; Chuan-Hong DING; Yu-Lei LV; Gang-Feng LI

    2013-01-01

    In order to analyze the mechanism of deep hole high pressure hydraulic fracturing,nonlinear dynamic theory,damage mechanics,elastic-plastic mechanics are used,and the law of crack propagation and stress transfer under two deep hole hydraulic fracturing in tectonic stress areas is studied using seepage-stress coupling models with RFPA simulation software.In addition,the effects of rock burst control are tested using multiple methods,either in the stress field or in the energy field.The research findings show that with two deep holes hydraulic fracturing in tectonic stress areas,the direction of the main crack propagation under shear-tensile stress is parallel to the greatest principal stress direction.High-pressure hydraulic fracturing water seepage can result in the destruction of the coal structure,while also weakening the physical and mechanical properties of coal and rock.Therefore the impact of high stress concentration in hazardous areas will level off,which has an effect on rock burst prevention and control in the region.

  4. Optimization of Hydraulic Fracturing Fluid System in a Sand Oil Reservoir in Southwest of Iran

    Directory of Open Access Journals (Sweden)

    Reza Masoomi

    2015-10-01

    Full Text Available Fracturing fluid is one of the most important components of a hydraulic fracturing operation. Currently a lot of fluids are available for hydraulic fracturing. In order to selecting the most appropriate fracturing fluid for oil and gas wells with special characteristics, should be well understood fluid properties and should be informed about how changes in fluid properties to achieve the desired results. The aim of this study is optimization of viscosity and gel concentration in water base and foam base fluids which are used in hydraulic fracturing process in a sand oil reservoir in southwest of Iran. For this purpose various scenarios have been designed for various kinds of water base fluids and foam base fluids. Then the cumulative oil production has been estimated versus time and fracture half length. In addition the final required fracturing fluid and proppant have been determined for hydraulic fracturing in studied reservoir. Also in this study increasing the cumulative oil recovery in fractured and Non-fractured wells in a sand oil reservoir in southwest of Iran have been investigated.

  5. A Laboratory Study of the Effects of Interbeds on Hydraulic Fracture Propagation in Shale Formation

    Directory of Open Access Journals (Sweden)

    Zhiheng Zhao

    2016-07-01

    Full Text Available To investigate how the characteristics of interbeds affect hydraulic fracture propagation in the continental shale formation, a series of 300 mm × 300 mm × 300 mm concrete blocks with varying interbeds, based on outcrop observation and core measurement of Chang 7-2 shale formation, were prepared to conduct the hydraulic fracturing experiments. The results reveal that the breakdown pressure increases with the rise of thickness and strength of interbeds under the same in-situ field stress and injection rate. In addition, for the model blocks with thick and high strength interbeds, the hydraulic fracture has difficulty crossing the interbeds and is prone to divert along the bedding faces, and the fracturing effectiveness is not good. However, for the model blocks with thin and low strength interbeds, more long branches are generated along the main fracture, which is beneficial to the formation of the fracture network. What is more, combining the macroscopic descriptions with microscopic observations, the blocks with thinner and lower strength interbeds tend to generate more micro-fractures, and the width of the fractures is relatively larger on the main fracture planes. Based on the experiments, it is indicated that the propagation of hydraulic fractures is strongly influenced by the characteristics of interbeds, and the results are instructive to the understanding and evaluation of the fracability in the continental shale formation.

  6. The Role of Toxicological Science in Meeting the Challenges and Opportunities of Hydraulic Fracturing

    Science.gov (United States)

    We briefly describe how toxicology can inform the discussion and debate of the merits of hydraulic fracturing by providing information on the potential toxicity of the chemical and physical agents associated with this process, individually and in combination. We consider upstream...

  7. A review of numerical simulation strategies for hydraulic fracturing, natural fracture reactivation and induced microseismicity prediction

    NARCIS (Netherlands)

    Shahid, A.S.A.; Fokker, P.A.; Rocca, V.

    2016-01-01

    Hydraulic fracturing, natural fracture reactivation and resulting induced microseismicity are interconnected phenomena involved in shale gas exploitation. Due to their multi-physics and their complexity, deep understanding of these phenomena as well as their mutual interaction require the adoption o

  8. Variable frequency of pulse hydraulic fracturing for improving permeability in coal seam

    Institute of Scientific and Technical Information of China (English)

    Li Quangui; Lin Baiquan; Zhai Cheng; Ni Guanhua; Peng Shen; Sun Chen; Cheng Yanying

    2013-01-01

    Variable frequency, a new pattern of pulse hydraulic fracturing, is presented for improving permeability in coal seam. A variable frequency pulse hydraulic fracturing testing system was built, the mould with triaxial loading was developed. Based on the monitor methods of pressure sensor and acoustic emission, the trials of two patterns of pulse hydraulic fracturing of single frequency and variable frequency were carried out, and at last fracturing mechanism was analyzed. The results show that the effect of variable frequency on fracture extension is better than that of single frequency based on the analysis of macro-scopic figures and AE. And the shortage of single frequency is somewhat remedied when the frequency is variable. Under variable frequency, the pressure process can be divided into three stages: low fre-quency band, pressure stability band and high frequency band, and rupture pressure of the sample is smaller than that of the condition of single frequency. Based on the Miner fatigue theory, the effect of different loading sequences on sample rupture is discussed and the results show that it is better to select the sequence of low frequency at first and then high frequency. Our achievements can give a basis for the improvement and optimization of the pulse hydraulic fracturing technology.

  9. Directional hydraulic fracturing to control hard-roof rockburst in coal mines

    Institute of Scientific and Technical Information of China (English)

    Fan Jun; Dou Linming; He Hu; Du Taotao; Zhang Shibin; Gui Bing; Sun Xinglin

    2012-01-01

    Hard roof is the main factor that induces rock-burst.In view of the present obvious weakness of control measures for hard roof rockburst in domestic collieries,the mechanism and field application of directional hydraulic fracturing technology for rock-burst prevention have been investigated in this paper using theoretical analysis and numerical simulation.The results show that the weighting span of the main roof and the released kinetic energy as well as the total elastic energy decreased greatly after the directional fracturing of hard roof with the mining progression,thereby reducing the rockburst hazard degree to coal body.The directional hydraulic fracturing technology was carried out in 6305 working face of Jisan Coal Mine to prevent rockburst.Field practices have proved that this technology is much simpler and safer to operate with better prevention effect compared with blasting.By optimizing the operation procedures and developing a new technology of automated high-pressure delivery pipe,the maximum fracturing radius now reaches more than 9 m and the borehole depth exceeds 20 m.Additionally,drilling cutting method was applied to monitor the stress of the coal mass before and after the fracturing,and the drill cuttings dropped significantly which indicates that the burst prevention effect of directional hydraulic fracturing technology is very remarkable.The research results of this paper have laid a theoretical and practical foundation for the widespread application of the directional hydraulic fracturing technology in China.

  10. 78 FR 34611 - Oil and Gas; Hydraulic Fracturing on Federal and Indian Lands

    Science.gov (United States)

    2013-06-10

    ... initial comment period. DATES: The comment period for the proposed rule published May 24, 2013 (78 FR... The revised proposed rule was published on May 24, 2013 (78 FR 31636), with a 30-day comment period... Bureau of Land Management 43 CFR Part 3160 RIN 1004-AE26 Oil and Gas; Hydraulic Fracturing on Federal...

  11. Chloride concentration gradients in tank-stored hydraulic fracturing fluids following flowback

    Science.gov (United States)

    Pamela J. Edwards; Linda L. Tracy; William K. Wilson

    2011-01-01

    A natural gas well in West Virginia was hydraulically fractured and the flowback was recovered and stored in an 18-foot-deep tank. Both in situ field test kit and laboratory measurements of electrical conductivity and chloride concentrations increased substantially with depth, although the laboratory measurements showed a greater increase. The field test kit also...

  12. Characterizing hydraulic fractures in shale gas reservoirs using transient pressure tests

    Directory of Open Access Journals (Sweden)

    Cong Wang

    2015-06-01

    This work presents an unconventional gas reservoir simulator and its application to quantify hydraulic fractures in shale gas reservoirs using transient pressure data. The numerical model incorporates most known physical processes for gas production from unconventional reservoirs, including two-phase flow of liquid and gas, Klinkenberg effect, non-Darcy flow, and nonlinear adsorption. In addition, the model is able to handle various types and scales of fractures or heterogeneity using continuum, discrete or hybrid modeling approaches under different well production conditions of varying rate or pressure. Our modeling studies indicate that the most sensitive parameter of hydraulic fractures to early transient gas flow through extremely low permeability rock is actually the fracture-matrix contacting area, generated by fracturing stimulation. Based on this observation, it is possible to use transient pressure testing data to estimate the area of fractures generated from fracturing operations. We will conduct a series of modeling studies and present a methodology using typical transient pressure responses, simulated by the numerical model, to estimate fracture areas created or to quantity hydraulic fractures with traditional well testing technology. The type curves of pressure transients from this study can be used to quantify hydraulic fractures in field application.

  13. Influence of Concentration and Salinity on the Biodegradability of Organic Additives in Hydraulic Fracturing Fluid

    Science.gov (United States)

    Mouser, P. J.; Kekacs, D.

    2014-12-01

    One of the risks associated with the use of hydraulic fracturing technologies for energy development is the potential release of hydraulic fracturing-related fluids into surface waters or shallow aquifers. Many of the organic additives used in hydraulic fracturing fluids are individually biodegradable, but little is know on how they will attenuate within a complex organic fluid in the natural environment. We developed a synthetic hydraulic fracturing fluid based on disclosed recipes used by Marcellus shale operators to evaluate the biodegradation potential of organic additives across a concentration (25 to 200 mg/L DOC) and salinity gradient (0 to 60 g/L) similar to Marcellus shale injected fluids. In aerobic aqueous solutions, microorganisms removed 91% of bulk DOC from low SFF solutions and 57% DOC in solutions having field-used SFF concentrations within 7 days. Under high SFF concentrations, salinity in excess of 20 g/L inhibited organic compound biodegradation for several weeks, after which time the majority (57% to 75%) of DOC remained in solution. After SFF amendment, the initially biodiverse lake or sludge microbial communities were quickly dominated (>79%) by Pseudomonas spp. Approximately 20% of added carbon was converted to biomass while the remainder was respired to CO2 or other metabolites. Two alcohols, isopropanol and octanol, together accounted for 2-4% of the initial DOC, with both compounds decreasing to below detection limits within 7 days. Alcohol degradation was associated with an increase in acetone at mg/L concentrations. These data help to constrain the biodegradation potential of organic additives in hydraulic fracturing fluids and guide our understanding of the microbial communities that may contribute to attenuation in surface waters.

  14. Statistical Analysis of Seismicity Associated with Hydraulic Fracturing in Western Canada

    Science.gov (United States)

    Shcherbakov, R.; Ghofrani, H.; Kothari, S.; Atkinson, G. M.; Cheadle, B.; Eaton, D. W. S.; Tiampo, K. F.

    2015-12-01

    The unconventional extraction of shale oil or gas is typically carried out by the subsurface injection of large volumes of fluids. The fluids are used in the process of hydraulic fracturing and subsequent wastewater injection into high volume disposal wells. These operations are usually accompanied by various levels of seismic activity and sometimes result in the occurrence of moderate to large earthquakes. It is suggested that the increase in seismic activity within the central U.S. in the last decade or so is primely associated with large-scale disposal of wastewater. The Western Canada Sedimentary Basin (WCSB) is an active exploration area for the extraction of oil and gas. The average rate of seismicity is lower than in the central U.S., however, there are several active clusters, where in the last 8-10 years, there has been an increase in the occurrence of moderate earthquakes. In this study, we analyze the statistical properties of seismicity associated with the WCSB. We find that the increase in seismicity rate is mostly associated with the hydraulic fracturing operations in several well defined spatial zones. Hydraulic fracturing involves high-pressure injections of fluids and is performed in multiple stages. This is done along horizontal wells which are drilled at average depths of 2 to 3 km. The triggering of large earthquakes is mostly due to injection of fluids into nearby tectonic faults which are close to failure. To model the rate of the occurrence of earthquakes we introduce a modified version of the Epidemic Type Aftershock Sequence model. The earthquake occurrence rate associated with several prominent clusters is characterized by bursts of activity associated with specifics of hydraulic fracturing operations. The proposed model can be used in the probabilistic assessment and mitigation of the risks associated with hydraulic fracturing.

  15. Radiological issues associated with the recent boom in oil and gas hydraulic fracturing

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Alejandro [AMEC Environment and Infrastructure, 800 North Bell Ave., Pittsburgh, PA 15106 (United States)

    2013-07-01

    As the worldwide hydraulic fracturing 'fracking' market continued to grow to an estimated $37 Billion in 2012, the need to understand and manage radiological issues associated with fracking is becoming imperative. Fracking is a technique that injects pressurized fluid into rock layer to propagate fractures that allows natural gas and other petroleum products to be more easily extracted. Radioactivity is associated with fracking in two ways. Radioactive tracers are frequently a component of the injection fluid used to determine the injection profile and locations of fractures. Second, because there are naturally-occurring radioactive materials (NORM) in the media surrounding and containing oil and gas deposits, the process of fracking can dislodge radioactive materials and transport them to the surface in the wastewater and gases. Treatment of the wastewater to remove heavy metals and other contaminates can concentrate the NORM into technologically-enhanced NORM (TENORM). Regulations to classify, transport, and dispose of the TENORM and other radioactive waste can be complicated and cumbersome and vary widely in the international community and even between states/provinces. In many cases, regulations on NORM and TENORM do not even exist. Public scrutiny and regulator pressure will only continue to increase as the world demands on oil and gas continue to rise and greater quantities of TENORM materials are produced. Industry experts, health physicists, regulators, and public communities must work together to understand and manage radiological issues to ensure reasonable and effective regulations protective of the public, environment, and worker safety and health are implemented. (authors)

  16. Predominance and Metabolic Potential of Halanaerobium spp. in Produced Water from Hydraulically Fractured Marcellus Shale Wells.

    Science.gov (United States)

    Lipus, Daniel; Vikram, Amit; Ross, Daniel; Bain, Daniel; Gulliver, Djuna; Hammack, Richard; Bibby, Kyle

    2017-04-15

    Microbial activity in the produced water from hydraulically fractured oil and gas wells may potentially interfere with hydrocarbon production and cause damage to the well and surface infrastructure via corrosion, sulfide release, and fouling. In this study, we surveyed the microbial abundance and community structure of produced water sampled from 42 Marcellus Shale wells in southwestern Pennsylvania (well age ranged from 150 to 1,846 days) to better understand the microbial diversity of produced water. We sequenced the V4 region of the 16S rRNA gene to assess taxonomy and utilized quantitative PCR (qPCR) to evaluate the microbial abundance across all 42 produced water samples. Bacteria of the order Halanaerobiales were found to be the most abundant organisms in the majority of the produced water samples, emphasizing their previously suggested role in hydraulic fracturing-related microbial activity. Statistical analyses identified correlations between well age and biocide formulation and the microbial community, in particular, the relative abundance of Halanaerobiales We further investigated the role of members of the order Halanaerobiales in produced water by reconstructing and annotating a Halanaerobium draft genome (named MDAL1), using shotgun metagenomic sequencing and metagenomic binning. The recovered draft genome was found to be closely related to the species H. congolense, an oil field isolate, and Halanaerobium sp. strain T82-1, also recovered from hydraulic fracturing produced water. Reconstruction of metabolic pathways revealed Halanaerobium sp. strain MDAL1 to have the potential for acid production, thiosulfate reduction, and biofilm formation, suggesting it to have the ability to contribute to corrosion, souring, and biofouling events in the hydraulic fracturing infrastructure.IMPORTANCE There are an estimated 15,000 unconventional gas wells in the Marcellus Shale region, each generating up to 8,000 liters of hypersaline produced water per day

  17. Relationship of Shallow Groundwater Quality to Hydraulic Fracturing Activities in Antrim and Kalkaska Counties, MI

    Science.gov (United States)

    Stefansky, J. N.; Robertson, W. M.; Chappaz, A.; Babos, H.; Israel, S.; Groskreutz, L. M.

    2015-12-01

    Hydraulic fracturing (fracking) of oil and natural gas (O&G) wells is a widely applied technology that can increase yields from tight geologic formations. However, it is unclear how fracking may impact shallow groundwater; previous research into its effects has produced conflicting results. Much of the worry over potential impacts to water quality arises from concerns about the produced water. The water produced from O&G formations is often salty, contains toxic dissolved elements, and can be radioactive. If fracking activities cause or increase connectivity between O&G formations and overlying groundwater, there may be risks to aquifers. As one part of a groundwater quality study in Antrim and Kalkaska Counties, MI, samples were collected from the unconfined glacial aquifer (3-300 m thick) and produced water from the underlying Antrim formation, a shallow (180-670 m deep) natural gas producing black shale. Groundwater samples were collected between 200 to 10,000 m distance from producing Antrim gas wells and from a range of screened intervals (15-95 m). Samples were analyzed for major constituents (e.g., Br, Cl), pH, conductivity, and dissolved oxygen (DO). The specific conductance of groundwater samples ranged from 230-1020 μS/cm; DO ranged from 0.4-100% saturation. Preliminary results show a slight inverse correlation between specific conductance and proximity to producing Antrim wells. The observed range of DO saturation in glacial aquifer groundwater appears to be related to both screened depth of the water wells and proximity to Antrim wells. During sampling, some well owners expressed concerns about the effects of fracking on groundwater quality and reported odd smells and tastes in their water after O&G drilling occurred near their homes. The results of this study and reported observations provide evidence to suggest a potential hydrogeological connection between the Antrim formation and the overlying glacial aquifer in some locations; it also raises

  18. Optimization and Field Application of Hydraulic Fracturing Techniques in Deep Shale Reservoirs%深层页岩压裂工艺优化与现场试验

    Institute of Scientific and Technical Information of China (English)

    王海涛; 蒋廷学; 卞晓冰; 段华

    2016-01-01

    Hydraulic fracturing of deep shale reveals that high injection pressure ,low fracture conduc‐tivity ,limited stimulated reservoir volume ,and unsatisfactory primary production are mainly due to deep burial ,variable lithology and high in‐situ stresses .Based on the comprehensive evaluation of geological characteristics and fracturing potential of deep shale reservoirs ,technical difficulties in volumetric stimula‐tion were discussed and relevant countermeasures were proposed .Then ,a fracturing optimization method for deep shales was proposed ,and it combined a numerical simulation of the gas reservoir ,a calculation of induced stress and fracturing simulation .Fracturing segment/cluster ,perforation and stimulation treat‐ment parameters were analyzed .Taking Well Dingye 2HF as an example ,the implementation and control of deep shale fracturing techniques were discussed ,and the responses of stimulation pressure in field appli‐cation were identified .Through stage‐by‐stage optimization and fine adjustment of parameters in aspects of pad volume ,fracture initiation by gel ,and initial sand and fluid ratio .Finally ,a composite fracturing treatment procedure was formed ,i .e .pre acid + moderate viscosity gel + slick water + low viscosity gel+ moderate viscosity gel .The fracturing of deep shales has been improved successfully through the appli‐cation of the proposed procedure .In field application of Well Dingye 2HF ,12 stages of fracturing stimula‐tion were completed with initial gas production of 10 .5 × 104 m3/d after the treatment .This procedure will provide technical reference for hydraulic fracturing in similar deep shale gas reservoirs in the future .%深层页岩埋藏深、岩性差异大、地应力高,压裂改造时存在施工压力高、裂缝导流能力低、改造体积偏小、压后初产效果差等问题。在分析深层页岩地质特征参数和综合评价可压性的基础上,分析了体积改造面临的技术难

  19. 1PM TODAY: EPA to Hold Media Conference Call on Study of Hydraulic Fracturing Activities on Drinking Water Resources

    Science.gov (United States)

    WASHINGTON - Environmental Protection Agency (EPA) officials will deliver remarks about the agency's study on potential impacts on drinking water resources in the United States from hydraulic fracturing activities, as requested by Congress, on a med

  20. Finite element simulations of interactions between multiple hydraulic fractures in a poroelastic rock

    DEFF Research Database (Denmark)

    Salimzadeh, Saeed; Usui, Tomoya; Paluszny, Adriana

    2017-01-01

    A fully coupled three-dimensional finite-element model for hydraulic fractures in permeable rocks is presented, and used to investigate the ranges of applicability of the classical analytical solutions that are known to be valid in limiting cases. This model simultaneously accounts for fluid flow...... within the fracture and rock matrix, poroelastic deformation, propagation of the fractures, and fluid leakage into the rock formation. The model is validated against available asymptotic analytical solutions for penny-shaped fractures, in the viscosity-dominated, toughness-dominated, storage......-dominated, and leakoff-dominated regimes. However, for intermediate regimes, these analytical solutions cannot be used to predict the key hydraulic fracturing variables, i.e. injection pressure, fracture aperture, and length. For leakoff-dominated cases in permeable rocks, the asymptotic solutions fail to accurately...

  1. Computational and physical consequences of interaction of closely located simultaneous hydraulic fractures

    CERN Document Server

    Rejwer, Ewa

    2015-01-01

    Strong interaction of closely located, nearly parallel hydraulic fractures and its influence on their propagation are studied. Both computational and physical aspects of the problem are considered. It is shown that from the computational point of view, when a distance between cracks is small as compared with their sizes, the system becomes ill-conditioned and numerical results deteriorate. The physical consequence of the interaction consists in decreasing of the crack opening and even greater decrease of conductivity. Then the resistance to fluid flow grows what results in the propagation of only those fractures, the distance between which is large enough. The research aims to suggests a means to overcome the computational difficulty and to improve numerical simulation of hydraulic fractures in shales. Numerical experiments are carried out for a 2D problem by using the complex variable hypersingular boundary element method of higher order accuracy. The condition number of the main matrix of a system, the open...

  2. Response to 'Word choice as political speech': Hydraulic fracturing is a partisan issue.

    Science.gov (United States)

    Hopke, Jill E; Simis, Molly

    2016-04-28

    In 2015, Hopke & Simis published an analysis of social media discourse around hydraulic fracturing. Grubert (2016) offered a commentary on the research, highlighting the politicization of terminology used in the discourse on this topic. The present article is a response to Grubert (2016)'s commentary, in which we elaborate on the distinctions between terminology used in social media discourse around hydraulic fracturing (namely, 'frack,' 'fracking,' 'frac,' and 'fracing'). Additionally preliminary analysis supports the claim that industry-preferred terminology is severely limited in its reach. When industry actors opt-out of the discourse, the conversation followed by the majority of lay audiences is dominated by activists. exacerbating the political schism on the issue.

  3. Hydraulic fracturing model based on the discrete fracture model and the generalized J integral

    Science.gov (United States)

    Liu, Z. Q.; Liu, Z. F.; Wang, X. H.; Zeng, B.

    2016-08-01

    The hydraulic fracturing technique is an effective stimulation for low permeability reservoirs. In fracturing models, one key point is to accurately calculate the flux across the fracture surface and the stress intensity factor. To achieve high precision, the discrete fracture model is recommended to calculate the flux. Using the generalized J integral, the present work obtains an accurate simulation of the stress intensity factor. Based on the above factors, an alternative hydraulic fracturing model is presented. Examples are included to demonstrate the reliability of the proposed model and its ability to model the fracture propagation. Subsequently, the model is used to describe the relationship between the geometry of the fracture and the fracturing equipment parameters. The numerical results indicate that the working pressure and the pump power will significantly influence the fracturing process.

  4. Hydraulic fracturing to enhance the remediation of DNAPL in low permeability soils

    Energy Technology Data Exchange (ETDEWEB)

    Murdoch, L. [Univ. of Cincinnati, OH (United States); Slack, B. [FRX Inc., Cincinnati, OH (United States)

    1996-08-01

    Meager rates of fluid flow are a major obstacle to in situ remediation of low permeability soils. This paper describes methods designed to avoid that obstacle by creating fractures and filling them with sand to increase well discharge and change paths of fluid flow in soil. Gently dipping fractures 10 m in maximum dimension and 1 to 2 cm thick can be created in some contaminated soils at depths of a few in or greater. Hydraulic fractures can also be used to create electrically conductive layers or to deliver granules of chemically or biologically active compounds that will degrade contaminants in place. Benefits of applying hydraulic fractures to DNAPL recovery include rates of fluid recovery, enhancing upward gradients to improve hydrodynamic stabilization, forming flat-lying reactive curtains to intersect compounds moving downward, or improving the performance of electrokinetics intended to recover compounds dissolved in water. 30 refs., 7 figs., 1 tab.

  5. The Role of Toxicological Science in Meeting the Challenges and Opportunities of Hydraulic Fracturing

    OpenAIRE

    Goldstein, Bernard D.; Brooks, Bryan W.; Cohen, Steven D.; Gates, Alexander E.; Honeycutt, Michael E.; Morris, John B.; Orme-Zavaleta, Jennifer; Penning, Trevor M.; Snawder, John

    2014-01-01

    We briefly describe how toxicology can inform the discussion and debate of the merits of hydraulic fracturing by providing information on the potential toxicity of the chemical and physical agents associated with this process, individually and in combination. We consider upstream activities related to bringing chemical and physical agents to the site, on-site activities including drilling of wells and containment of agents injected into or produced from the well, and downstream activities inc...

  6. Regulation Of Hydraulic Fracturing In South Africa: A Project Life-Cycle Approach?

    Directory of Open Access Journals (Sweden)

    Willemien du Plessis

    2015-12-01

    Full Text Available This note deals with the 2015 regulations pertaining to hydraulic fracturing in South Africa from a project life-cycle approach. A brief history of the fragmentation of the regulation of environmental and mining related matters is provided, followed by a discussion of the application of the 2015 regulations during the project life cycle, ie the pre-commencement phase, the design and authorisation phase, the testing phase, the operational phase and the decommissioning and closure phase.

  7. Pressure Responses of a Vertically Hydraulic Fractured Well in a Reservoir with Fractal Structure

    CERN Document Server

    Razminia, Kambiz; Torres, Delfim F M

    2015-01-01

    We obtain an analytical solution for the pressure-transient behavior of a vertically hydraulic fractured well in a heterogeneous reservoir. The heterogeneity of the reservoir is modeled by using the concept of fractal geometry. Such reservoirs are called fractal reservoirs. According to the theory of fractional calculus, a temporal fractional derivative is applied to incorporate the memory properties of the fractal reservoir. The effect of different parameters on the computed wellbore pressure is fully investigated by various synthetic examples.

  8. The Impact of Mineralogy on the Geochemical Alteration of Shales During Hydraulic Fracturing Operations

    Science.gov (United States)

    Maher, K.; Harrison, A. L.; Jew, A. D.; Dustin, M. K.; Kiss, A. M.; Kohli, A. H.; Thomas, D.; Joe-Wong, C. M.; Brown, G. E.; Bargar, J.

    2016-12-01

    The extraction of oil and gas resources from low permeability shale reservoirs using hydraulic fracturing techniques has increased significantly in recent years. During hydraulic fracturing, large volumes of fluid are injected into subsurface shale formations, which drives substantial fluid-rock interaction that can release contaminants and alter rock permeability. Here, a combined experimental, imaging, and modeling approach was employed to systematically evaluate the impact of shale mineralogy on its physical and chemical alteration when exposed to fracturing fluids of different composition. Batch reactor experiments contained different shales with unique mineralogical compositions that were exposed to simulated hydraulic fracturing fluid. Experiments revealed that the balance between fluid acidity and acid neutralizing capacity of the rock was the strongest control on the evolution of fluid and rock chemistry. Carbonate mineral-rich shales rapidly recovered solution pH to circum-neutral conditions, whereas fluids in contact with carbonate mineral-poor shales remained acidic. The dissolution of shale minerals released metal contaminants, yet the precipitation of Fe(III)-bearing secondary phases helped to attenuate their release via co-precipitation or sorption. Post-reaction imaging illustrated that selective dissolution of carbonate minerals generated secondary porosity, the connectivity of which was dictated by initial carbonate distribution. Conversely, the precipitation of secondary Al- and Fe-bearing phases may occlude porosity, potentially inhibiting transport of water, contaminants, and hydrocarbons. The maturation of secondary Fe-bearing phases from amorphous to crystalline over time suggests that porosity will continue to evolve even after oxidation reactions have effectively ceased. These experiments reveal that the relative abundance and distribution of carbonate minerals is the master variable dictating both porosity alteration and contaminant release

  9. Particle-based simulation of hydraulic fracture and fluid/heat flow in geothermal reservoirs

    Science.gov (United States)

    Mora, Peter; Wang, Yucang; Alonso-Marroquin, Fernando

    2013-06-01

    Realizing the potential of geothermal energy as a cheap, green, sustainable resource to provide for the planet's future energy demands that a key geophysical problem be solved first: how to develop and maintain a network of multiple fluid flow pathways for the time required to deplete the heat within a given region. We present the key components for micro-scale particle-based numerical modeling of hydraulic fracture, and fluid and heat flow in geothermal reservoirs. They are based on the latest developments of ESyS-Particle - the coupling of the Lattice Solid Model (LSM) to simulate the nonlinear dynamics of complex solids with the Lattice Boltzmann Method (LBM) applied to the nonlinear dynamics of coupled fluid and heat flow in the complex solid-fluid system. The coupled LSM/LBM can be used to simulate development of fracture systems in discontinuous media, elastic stress release, fluid injection and the consequent slip at joint surfaces, and hydraulic fracturing; heat exchange between hot rocks and water within flow pathways created through hydraulic fracturing; and fluid flow through complex, narrow, compact and gouge-or powder-filled fracture and joint systems. We demonstrate the coupled LSM/LBM to simulate the fundamental processes listed above, which are all components for the generation and sustainability of the hot-fractured rock geothermal energy fracture systems required to exploit this new green-energy resource.

  10. The Behaviour of Fracture Growth in Sedimentary Rocks: A Numerical Study Based on Hydraulic Fracturing Processes

    Directory of Open Access Journals (Sweden)

    Lianchong Li

    2016-03-01

    Full Text Available To capture the hydraulic fractures in heterogeneous and layered rocks, a numerical code that can consider the coupled effects of fluid flow, damage, and stress field in rocks is presented. Based on the characteristics of a typical thin and inter-bedded sedimentary reservoir, China, a series of simulations on the hydraulic fracturing are performed. In the simulations, three points, i.e., (1 confining stresses, representing the effect of in situ stresses, (2 strength of the interfaces, and (3 material properties of the layers on either side of the interface, are crucial in fracturing across interfaces between two adjacent rock layers. Numerical results show that the hydrofracture propagation within a layered sequence of sedimentary rocks is controlled by changing in situ stresses, interface properties, and lithologies. The path of the hydraulic fracture is characterized by numerous deflections, branchings, and terminations. Four types of potential interaction, i.e., penetration, arrest, T-shaped branching, and offset, between a hydrofracture and an interface within the layered rocks are formed. Discontinuous composite fracture segments resulting from out-of-plane growth of fractures provide a less permeable path for fluids, gas, and oil than a continuous planar composite fracture, which are one of the sources of the high treating pressures and reduced fracture volume.

  11. Guiding-controlling technology of coal seam hydraulic fracturing fractures extension

    Institute of Scientific and Technical Information of China (English)

    Zhai; Cheng; Li; Min; Sun; Chen; Zhang; Jianguo; Yang; Wei; Li; Quangui

    2012-01-01

    Aiming at the uncontrollable problem of extension direction of coal seam hydraulic fracturing,this study analyzed the course of fractures variation around the boreholes in process of hydraulic fracturing,and carried out the numerical simulations to investigate the effect of artificial predetermined fractures on stress distribution around fractured holes.The simulation results show that partial coal mass occurs relatively strong shear failure and forms weak surfaces,and then fractures extended along the desired direction while predetermined fractures changed stress distribution.Directional fracturing makes the fractures link up and the pressure on coal mass is relieved within fractured regions.Combining deep hole controlling blasting with hydraulic fracturing was proposed to realize the extension guiding-controlling technology of coal seam fractures.Industrial experiments prove that this technology can avoid local stress concentration and dramatically widen the pressure relief scope of deep hole controlling blasting.The permeability of fractured coal seam increased significantly,and gas extraction was greatly improved.Besides,regional pressure relief and permeability increase was achieved in this study.

  12. Biocides in hydraulic fracturing fluids: a critical review of their usage, mobility, degradation, and toxicity.

    Science.gov (United States)

    Kahrilas, Genevieve A; Blotevogel, Jens; Stewart, Philip S; Borch, Thomas

    2015-01-06

    Biocides are critical components of hydraulic fracturing ("fracking") fluids used for unconventional shale gas development. Bacteria may cause bioclogging and inhibit gas extraction, produce toxic hydrogen sulfide, and induce corrosion leading to downhole equipment failure. The use of biocides such as glutaraldehyde and quaternary ammonium compounds has spurred a public concern and debate among regulators regarding the impact of inadvertent releases into the environment on ecosystem and human health. This work provides a critical review of the potential fate and toxicity of biocides used in hydraulic fracturing operations. We identified the following physicochemical and toxicological aspects as well as knowledge gaps that should be considered when selecting biocides: (1) uncharged species will dominate in the aqueous phase and be subject to degradation and transport whereas charged species will sorb to soils and be less bioavailable; (2) many biocides are short-lived or degradable through abiotic and biotic processes, but some may transform into more toxic or persistent compounds; (3) understanding of biocides' fate under downhole conditions (high pressure, temperature, and salt and organic matter concentrations) is limited; (4) several biocidal alternatives exist, but high cost, high energy demands, and/or formation of disinfection byproducts limits their use. This review may serve as a guide for environmental risk assessment and identification of microbial control strategies to help develop a sustainable path for managing hydraulic fracturing fluids.

  13. SIMULATION AND OPTIMIZATION OF THE HYDRAULIC FRACTURING OPERATION IN A HEAVY OIL RESERVOIR IN SOUTHERN IRAN

    Directory of Open Access Journals (Sweden)

    REZA MASOOMI

    2017-01-01

    Full Text Available Extraction of oil from some Iranian reservoirs due to high viscosity of their oil or reducing the formation permeability due to asphaltene precipitation or other problems is not satisfactory. Hydraulic fracturing method increases production in the viscous oil reservoirs that the production rate is low. So this is very important for some Iranian reservoirs that contain these characteristics. In this study, hydraulic fracturing method has been compositionally simulated in a heavy oil reservoir in southern Iran. In this study, the parameters of the fracture half length, the propagation direction of the cracks and the depth of fracturing have been considered in this oil reservoir. The aim of this study is to find the best scenario which has the highest recovery factor in this oil reservoir. For this purpose the parameters of the length, propagation direction and depth of fracturing have been optimized in this reservoir. Through this study the cumulative oil production has been evaluated with the compositional simulation for the next 10 years in this reservoir. Also at the end of this paper, increasing the final production of this oil reservoir caused by optimized hydraulic fracturing has been evaluated.

  14. Discourse over a contested technology on Twitter: A case study of hydraulic fracturing.

    Science.gov (United States)

    Hopke, Jill E; Simis, Molly

    2015-10-04

    High-volume hydraulic fracturing, a drilling simulation technique commonly referred to as "fracking," is a contested technology. In this article, we explore discourse over hydraulic fracturing and the shale industry on the social media platform Twitter during a period of heightened public contention regarding the application of the technology. We study the relative prominence of negative messaging about shale development in relation to pro-shale messaging on Twitter across five hashtags (#fracking, #globalfrackdown, #natgas, #shale, and #shalegas). We analyze the top actors tweeting using the #fracking hashtag and receiving @mentions with the hashtag. Results show statistically significant differences in the sentiment about hydraulic fracturing and shale development across the five hashtags. In addition, results show that the discourse on the main contested hashtag #fracking is dominated by activists, both individual activists and organizations. The highest proportion of tweeters, those posting messages using the hashtag #fracking, were individual activists, while the highest proportion of @mention references went to activist organizations. © The Author(s) 2015.

  15. Genome-Centric Analysis of Microbial Populations Enriched by Hydraulic Fracture Fluid Additives in a Coal Bed Methane Production Well.

    Science.gov (United States)

    Robbins, Steven J; Evans, Paul N; Parks, Donovan H; Golding, Suzanne D; Tyson, Gene W

    2016-01-01

    Coal bed methane (CBM) is generated primarily through the microbial degradation of coal. Despite a limited understanding of the microorganisms responsible for this process, there is significant interest in developing methods to stimulate additional methane production from CBM wells. Physical techniques including hydraulic fracture stimulation are commonly applied to CBM wells, however the effects of specific additives contained in hydraulic fracture fluids on native CBM microbial communities are poorly understood. Here, metagenomic sequencing was applied to the formation waters of a hydraulically fractured and several non-fractured CBM production wells to determine the effect of this stimulation technique on the in-situ microbial community. The hydraulically fractured well was dominated by two microbial populations belonging to the class Phycisphaerae (within phylum Planctomycetes) and candidate phylum Aminicenantes. Populations from these phyla were absent or present at extremely low abundance in non-fractured CBM wells. Detailed metabolic reconstruction of near-complete genomes from these populations showed that their high relative abundance in the hydraulically fractured CBM well could be explained by the introduction of additional carbon sources, electron acceptors, and biocides contained in the hydraulic fracture fluid.

  16. Evidence for hydraulic fracturing at Gale crater, Mars: Implications for burial depth of the Yellowknife Bay formation

    Science.gov (United States)

    Caswell, Tess E.; Milliken, Ralph E.

    2017-06-01

    NASA's Curiosity rover identified a formerly habitable environment within strata informally known as the Yellowknife Bay formation. The stratigraphic relationship, and thus depositional age, of these rocks relative to other geologic units in Gale crater is not clear from orbital data alone. If part of lower Aeolis Mons (informally known as Mount Sharp), the Yellowknife Bay rocks have been deeply buried and exhumed prior to 3.2-3.3 Ga. If part of younger alluvial fan deposits, however, they likely have never experienced more than ∼100 m of burial. Knowledge of burial history can thus constrain the stratigraphic placement of Yellowknife Bay and the habitable environment preserved therein. The mechanics of natural hydraulic fractures observed in mudstone at YKB allow us to evaluate its burial history and imply a minimum burial depth of 1.2 km. This is consistent with burial by the entirety of lower Mount Sharp and a depositional age of ∼ 3.6- 3.8 Ga, providing observation-based evidence that Mount Sharp was once much more laterally extensive than its present form. Rocks of the Yellowknife Bay formation thus represent the oldest strata that Curiosity will encounter during its journey in Gale crater, and any additional habitable environments discovered along Curiosity's future path represent conditions at younger times.

  17. A Site Characterization Protocol for Evaluating the Potential for Triggered or Induced Seismicity Resulting from Wastewater Injection and Hydraulic Fracturing

    Science.gov (United States)

    Walters, R. J.; Zoback, M. D.; Gupta, A.; Baker, J.; Beroza, G. C.

    2014-12-01

    Regulatory and governmental agencies, individual companies and industry groups and others have recently proposed, or are developing, guidelines aimed at reducing the risk associated with earthquakes triggered by waste water injection or hydraulic fracturing. While there are a number of elements common to the guidelines proposed, not surprisingly, there are also some significant differences among them and, in a number of cases, important considerations that are not addressed. The goal of this work is to develop a comprehensive protocol for site characterization based on a rigorous scientific understanding of the responsible processes. Topics addressed will include the geologic setting (emphasizing faults that might be affected), historical seismicity, hydraulic characterization of injection and adjacent intervals, geomechanical characterization to identify potentially active faults, plans for seismic monitoring and reporting, plans for monitoring and reporting injection (pressure, volumes, and rates), other factors contributing to risk (potentially affected population centers, structures, and facilities), and implementing a modified Probabilistic Seismic Hazard Analysis (PSHA). The guidelines will be risk based and adaptable, rather than prescriptive, for a proposed activity and region of interest. They will be goal oriented and will rely, to the degree possible, on established best practice procedures, referring to existing procedures and recommendations. By developing a risk-based site characterization protocol, we hope to contribute to the development of rational and effective measures for reducing the risk posed by activities that potentially trigger earthquakes.

  18. Assessment of the Impacts of Hydraulic Fracturing at Bakken on Regional Water Resources

    Science.gov (United States)

    Lin, Z.; Lin, T.; Lim, S.; Borders, M.

    2015-12-01

    Unconventional oil production at the Bakken Shale of western North Dakota increased more than ten-fold from 2008 to 2014. Although unconventional oil production uses less water than conventional oil production per unit of energy, the cumulative water needs for unconventional oil production due to multiple drilling and fracturing operations may be locally or temporally significant. We collected and analyzed the data for a total of 8453 horizontal wells developed at Bakken in western North Dakota during 2007-2014. The hydraulic fracturing activities mainly occurred in a core area of four counties, including Dunn, McKenzie, Mountrail, and Williams. The annual total water used for hydraulic fracking in western North Dakota increased from 302 ac-ft in 2007 to 21,605 ac-ft in 2014, by more than 70 times in 8 years. The four-county core area accounted for about 90% of total hydraulic fracturing water use in western North Dakota. Compared to the total water uses of all types, hydraulic fracturing water use in the four-county core area accounted for 0.7% in 2007 and 43.1% in 2014. Statewide, this percentage increased from 0.1% to 6.1% in the same time period. As horizontal drilling and hydraulic fracturing technologies matured for unconventional oil development at Bakken, the total depth and the total length of laterals per well seemed to reach an optimal value in the last four years (2011-2014). However, the number of fracturing stages and the volume of fracking water used per completion are still on the rise. The average water use per well increased from about 1.7 ac-ft in 2007 to 11.4 ac-ft in 2014. Correspondingly, the water intensity (volume of fracking water used per foot of laterals) increased from 67 gallon/ft in 2007 to about 372 gallon/ft 2014. The results helped us better understand the environmental impacts of hydraulic fracturing at Bakken and better manage the water resources in the region.

  19. Assessing the monitoring performance using a synthetic microseismic catalogue for hydraulic fracturing

    Science.gov (United States)

    Ángel López Comino, José; Kriegerowski, Marius; Cesca, Simone; Dahm, Torsten; Mirek, Janusz; Lasocki, Stanislaw

    2016-04-01

    Hydraulic fracturing is considered among the human operations which could induce or trigger seismicity or microseismic activity. The influence of hydraulic fracturing operations is typically expected in terms of weak magnitude events. However, the sensitivity of the rock mass to trigger seismicity varies significantly for different sites and cannot be easily predicted prior to operations. In order to assess the sensitivity of microseismity to hydraulic fracturing operations, we perform a seismic monitoring at a shale gas exploration/exploitation site in the central-western part of the Peribaltic synclise at Pomerania (Poland). The monitoring will be continued before, during and after the termination of hydraulic fracturing operations. The fracking operations are planned in April 2016 at a depth 4000 m. A specific network setup has been installed since summer 2015, including a distributed network of broadband stations and three small-scale arrays. The network covers a region of 60 km2. The aperture of small scale arrays is between 450 and 950 m. So far no fracturing operations have been performed, but seismic data can already be used to assess the seismic noise and background microseismicity, and to investigate and assess the detection performance of our monitoring setup. Here we adopt a recently developed tool to generate a synthetic catalogue and waveform dataset, which realistically account for the expected microseismicity. Synthetic waveforms are generated for a local crustal model, considering a realistic distribution of hypocenters, magnitudes, moment tensors, and source durations. Noise free synthetic seismograms are superposed to real noise traces, to reproduce true monitoring conditions at the different station locations. We estimate the detection probability for different magnitudes, source-receiver distances, and noise conditions. This information is used to estimate the magnitude of completeness at the depth of the hydraulic fracturing horizontal wells

  20. Nanoscale zero-valent iron for metal/metalloid removal from model hydraulic fracturing wastewater.

    Science.gov (United States)

    Sun, Yuqing; Lei, Cheng; Khan, Eakalak; Chen, Season S; Tsang, Daniel C W; Ok, Yong Sik; Lin, Daohui; Feng, Yujie; Li, Xiang-Dong

    2017-06-01

    Nanoscale zero-valent iron (nZVI) was tested for the removal of Cu(II), Zn(II), Cr(VI), and As(V) in model saline wastewaters from hydraulic fracturing. Increasing ionic strength (I) from 0.35 to 4.10 M (Day-1 to Day-90 wastewaters) increased Cu(II) removal (25.4-80.0%), inhibited Zn(II) removal (58.7-42.9%), slightly increased and then reduced Cr(VI) removal (65.7-44.1%), and almost unaffected As(V) removal (66.7-75.1%) by 8-h reaction with nZVI at 1-2 g L(-1). The removal kinetics conformed to pseudo-second-order model, and increasing I decreased the surface area-normalized rate coefficient (ksa) of Cu(II) and Cr(VI), probably because agglomeration of nZVI in saline wastewaters restricted diffusion of metal(loid)s to active surface sites. Increasing I induced severe Fe dissolution from 0.37 to 0.77% in DIW to 4.87-13.0% in Day-90 wastewater; and Fe dissolution showed a significant positive correlation with Cu(II) removal. With surface stabilization by alginate and polyvinyl alcohol, the performance of entrapped nZVI in Day-90 wastewater was improved for Zn(II) and Cr(VI), and Fe dissolution was restrained (3.20-7.36%). The X-ray spectroscopic analysis and chemical speciation modelling demonstrated that the difference in removal trends from Day-1 to Day-90 wastewaters was attributed to: (i) distinctive removal mechanisms of Cu(II) and Cr(VI) (adsorption, (co-)precipitation, and reduction), compared to Zn(II) (adsorption) and As(V) (bidentate inner-sphere complexation); and (ii) changes in solution speciation (e.g., from Zn(2+) to ZnCl3(-) and ZnCl4(2-); from CrO4(2-) to CaCrO4 complex). Bare nZVI was susceptible to variations in wastewater chemistry while entrapped nZVI was more stable and environmentally benign, which could be used to remove metals/metalloids before subsequent treatment for reuse/disposal. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. The Functional Potential of Microbial Communities in Hydraulic Fracturing Source Water and Produced Water from Natural Gas Extraction Characterized by Metagenomic Sequencing

    OpenAIRE

    Arvind Murali Mohan; Bibby, Kyle J.; Daniel Lipus; Hammack, Richard W.; Gregory, Kelvin B

    2014-01-01

    Microbial activity in produced water from hydraulic fracturing operations can lead to undesired environmental impacts and increase gas production costs. However, the metabolic profile of these microbial communities is not well understood. Here, for the first time, we present results from a shotgun metagenome of microbial communities in both hydraulic fracturing source water and wastewater produced by hydraulic fracturing. Taxonomic analyses showed an increase in anaerobic/facultative anaerobi...

  2. Numerical Investigation of Influence of In-Situ Stress Ratio, Injection Rate and Fluid Viscosity on Hydraulic Fracture Propagation Using a Distinct Element Approach

    Directory of Open Access Journals (Sweden)

    Bo Zhang

    2016-02-01

    Full Text Available Numerical simulation is very useful for understanding the hydraulic fracturing mechanism. In this paper, we simulate the hydraulic fracturing using the distinct element approach, to investigate the effect of some critical parameters on hydraulic fracturing characteristics. The breakdown pressure obtained by the distinct element approach is consistent with the analytical solution. This indicates that the distinct element approach is feasible on modeling the hydraulic fracturing. We independently examine the influence of in-situ stress ratio, injection rate and fluid viscosity on hydraulic fracturing. We further emphasize the relationship between these three factors and their contributions to the hydraulic fracturing. With the increase of stress ratio, the fracture aperture increases almost linearly; with the increase of injection rate and fluid viscosity, the fracture aperture and breakdown pressure increase obviously. A low value of product of injection rate and fluid viscosity (i.e., Qμ will lead to narrow fracture aperture, low breakdown pressure, and complex or dispersional hydraulic fractures. A high value of Qμ would lead wide fracture aperture, high breakdown pressure, and simple hydraulic fractures (e.g., straight or wing shape. With low viscosity fluid, the hydraulic fracture geometry is not sensitive to stress ratio, and thus becomes a complex fracture network.

  3. Predominance and Metabolic Potential of Halanaerobium spp. in Produced Water from Hydraulically Fractured Marcellus Shale Wells

    Energy Technology Data Exchange (ETDEWEB)

    Lipus, Daniel; Vikram, Amit; Ross, Daniel; Bain, Daniel; Gulliver, Djuna; Hammack, Richard; Bibby, Kyle; Stams, Alfons J. M.

    2017-02-03

    ABSTRACT

    Microbial activity in the produced water from hydraulically fractured oil and gas wells may potentially interfere with hydrocarbon production and cause damage to the well and surface infrastructure via corrosion, sulfide release, and fouling. In this study, we surveyed the microbial abundance and community structure of produced water sampled from 42 Marcellus Shale wells in southwestern Pennsylvania (well age ranged from 150 to 1,846 days) to better understand the microbial diversity of produced water. We sequenced the V4 region of the 16S rRNA gene to assess taxonomy and utilized quantitative PCR (qPCR) to evaluate the microbial abundance across all 42 produced water samples. Bacteria of the orderHalanaerobialeswere found to be the most abundant organisms in the majority of the produced water samples, emphasizing their previously suggested role in hydraulic fracturing-related microbial activity. Statistical analyses identified correlations between well age and biocide formulation and the microbial community, in particular, the relative abundance ofHalanaerobiales. We further investigated the role of members of the orderHalanaerobialesin produced water by reconstructing and annotating aHalanaerobiumdraft genome (named MDAL1), using shotgun metagenomic sequencing and metagenomic binning. The recovered draft genome was found to be closely related to the speciesH. congolense, an oil field isolate, andHalanaerobiumsp. strain T82-1, also recovered from hydraulic fracturing produced water. Reconstruction of metabolic pathways

  4. Intermediate-Scale Hydraulic Fracturing in a Deep Mine - kISMET Project Summary 2016

    Energy Technology Data Exchange (ETDEWEB)

    Oldenburg, C. M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dobson, P. F. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wu, Y. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cook, P. J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kneafsey, T. J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Nakagawa, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ulrich, C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Siler, D. L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Guglielmi, Y. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ajo-Franklin, J. B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Rutqvist, J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Daley, T. M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Birkholzer, J. T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wang, H. F. [Univ. of Wisconsin, Madison, WI (United States); Lord, N. E. [Univ. of Wisconsin, Madison, WI (United States); Haimson, B. C. [Univ. of Wisconsin, Madison, WI (United States); Sone, H. [Univ. of Wisconsin, Madison, WI (United States); Vigilante, P. [Univ. of Wisconsin, Madison, WI (United States); Roggenthen, W. M. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Doe, T. W. [Golder Associates Inc., Toronto, ON (Canada); Lee, M. Y. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ingraham, M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huang, H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mattson, E. D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhou, J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Johnson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Morris, J. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); White, J. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Johnson, P. A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Coblentz, D. D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Heise, J. [Stanford Underground Research Facility, Lead, SD (United States); Zoback, M. D. [Stanford Univ., CA (United States)

    2016-11-04

    In support of the U.S. DOE SubTER Crosscut initiative, we established a field test facility in a deep mine and designed and carried out in situ hydraulic fracturing experiments in the crystalline rock at the site to characterize the stress field, understand the effects of rock fabric on fracturing, and gain experience in monitoring using geophysical methods. The project also included pre- and post-fracturing simulation and analysis, laboratory measurements and experiments, and we conducted an extended analysis of the local stress state using previously collected data. Some of these activities are still ongoing. The kISMET (permeability (k) and Induced Seismicity Management for Energy Technologies) experiments meet objectives in SubTER’s “stress” pillar and the “new subsurface signals” pillar. The kISMET site was established in the West Access Drift of SURF 4850 ft (1478 m) below ground (on the 4850L) in phyllite of the Precambrian Poorman Formation. We drilled and cored five near-vertical boreholes in a line on 3 m spacing, deviating the two outermost boreholes slightly to create a five-spot pattern around the test borehole centered in the test volume at ~1528 m (5013 ft). Laboratory measurements of core from the center test borehole showed P-wave velocity heterogeneity along each core indicating strong, fine-scale (~1 cm or smaller) changes in the mechanical properties of the rock. The load-displacement record on the core suggests that the elastic stiffness is anisotropic. Tensile strength ranges between 3-7.5 MPa and 5-12 MPa. Permeability measurements are planned, as are two types of laboratory miniature hydraulic fracturing experiments to investigate the importance of rock fabric (anisotropy and heterogeneity) on near-borehole hydraulic fracture generation. Pre-fracturing numerical simulations with INL’s FALCON discrete element code predicted a fracture radius of 1.2 m for a corresponding injection volume of 1.2 L for the planned fractures, and

  5. Hydraulic fracturing model featuring initiation beyond the wellbore wall for directional well in coal bed

    Science.gov (United States)

    Li, Yuwei; Jia, Dan; Wang, Meng; Liu, Jia; Fu, Chunkai; Yang, Xinliang; Ai, Chi

    2016-08-01

    In developing internal fracture systems in coal beds, the initiation mechanism differs greatly from that of conventional ones and initiations may be produced beyond the wellbore wall. This paper describes the features of the internal structure of coal beds and RFPA2D simulation is used to attest the possible occurrence of initiation beyond the wellbore wall in coal bed hydraulic fracturing. Using the theory of elasticity and fracture mechanics, we analyse the stress distribution in the vicinal coal rock. Then by taking into consideration the effects of the spatial relationship between coal bed cleats and the wellbore, we establish a model for calculating both tensile and shear initiation pressure that occur along cleats beyond the wellbore wall. The simulation in this paper indicates that for shear initiations that happen along coal cleats, the pressure required to initiate fracture for cleats beyond the wellbore wall is evidently lower than that on the wellbore wall, thus it is easier to initiate shear fractures for cleats beyond the wellbore wall. For tensile failure, the pressure required to initiate tensile fracture for cleats beyond the wellbore wall is obviously higher than that for cleats at the wellbore wall, thus it is easier to initiate tensile fractures for cleats at the wellbore wall. On the one hand, this paper has proved the possible occurrence of initiations beyond the wellbore wall and has changed the current assumption that hydraulic fractures can only occur at the wellbore wall. On the other hand, the established theoretical model provides a new approach to calculating the initiation pressure in hydraulic fracturing.

  6. Etat de l'art en fracturation hydraulique State-Of-The-Art in Hydraulic Fracturing

    Directory of Open Access Journals (Sweden)

    Bouteca M.

    2006-11-01

    Full Text Available Cet article est un abrégé des connaissances de base sur la mécanique de la fracturation hydraulique (éléments de mécanique de la rupture, pression de fracturation et pression de fermeture, sur l'avancement actuel des travaux de modélisation de la propagation de fracture classés par type d'approche mécanique (bidimensionnelle, pseudotridimensionnelle, tridimensionnelle et par méthode de résolution (analytique, numérique, sur les propriétés des fluides de fracturation et des agents de soutènement. Deux chapitres à caractère plus pratique sont consacrés à la préparation et à la mise en oeuvre de la fracturation hydraulique ainsi qu'à l'évaluation des résultats de la fracturation hydraulique en termes de perméabilité, dimensions et direction de fracture. This article is an abridged review of basic knowledge about the mechanics of hydraulic fracturing (fracture mechanics, fracturing pressure and closure pressure, about recent advances in the modeling of fracture propagation classified by type of mechanical approach (two-dimensional, pseudo-three-dimensional, three-dimensional and by method of solution (analytic, numeric, and about the properties of fracturing fluids and propping agents. Two chapters having a more practical nature are devoted to the preparation and implementation of hydraulic fracturing as well as to the evaluation of hydraulic-fracturing results in terms of permeability and fracture sizes and direction.

  7. Stimuli Responsive/Rheoreversible Hydraulic Fracturing Fluids for Enhanced Geothermal Energy Production (Part II)

    Energy Technology Data Exchange (ETDEWEB)

    Bonneville, Alain; Jung, Hun Bok; Shao, Hongbo; Kabilan, Senthil; Um, Wooyong; Carroll, Kenneth C.; Varga, Tamas; Suresh, Niraj; Stephens, Sean A.; Fernandez, Carlos A.

    2014-12-14

    We have used an environmentally friendly and recyclable hydraulic fracturing fluid - diluted aqueous solutions of polyallylamine or PAA – for reservoir stimulation in Enhanced Geothermal System (EGS). This fluid undergoes a controlled and large volume expansion with a simultaneous increase in viscosity triggered by CO2 at EGS temperatures. We are presenting here the results of laboratory-scale hydraulic fracturing experiment using the fluid on small cylindrical rock cores (1.59 cm in diameter and 5.08 cm in length) from the Coso geothermal field in California. Rock samples consisted of Mesozoic diorite metamorphosed to greenschist facies. The experiments were conducted on 5 samples for realistic ranges of pressures (up to 275 bar) and temperatures (up to 210 °C) for both the rock samples and the injected fluid. After fracturing, cores were subjected to a CO2 leakage test, injection of KI solution, and X-ray microtomography (XMT) scanning to examine the formation and distribution of fractures. The design and conduct of these experiments will be presented and discussed in details. Based on the obtained XMT images, Computational Fluid Dynamics (CFD) simulations were then performed to visualize hydraulic fractures and compute the bulk permeability. OpenFOAM (OpenCFD Ltd., Reading, UK), was used to solve the steady state simulation. The flow predictions, based upon the laminar, 3-D, incompressible Navier-Stokes equations for fluid mass and momentum, show the remarkable stimulation of the permeability in the core samples and demonstrate the efficiency of such a CO2 triggered fluid in EGS.

  8. A Geochemical Framework for Evaluating Shale-Hydraulic Fracture Fluid Interactions

    Science.gov (United States)

    Harrison, A. L.; Jew, A. D.; Dustin, M. K.; Joe-Wong, C. M.; Thomas, D.; Maher, K.; Brown, G. E.; Bargar, J.; Bill, M.; Conrad, M. E.

    2015-12-01

    The development of shale oil and gas reservoirs has increased dramatically due to the application of hydraulic fracturing techniques. Fracture fluids contain dissolved oxygen and numerous chemical additives [1] that are out of equilibrium with the reducing conditions in shale reservoirs and could react extensively with shale minerals and alter porosity. Yet, the complex dissolution-precipitation reactions in shales along with the poorly constrained characteristics of many fracture fluid additives hinder predictive modeling based on established reaction kinetics and thermodynamic constants [2]. Here, we are developing a reaction framework to better predict reaction progress and porosity evolution upon exposure of shales to hydraulic fracturing fluids. To this end, the reactive transport model CrunchFlow [3] was applied to the results of batch reactor experiments containing shales of different mineralogical and organic compositions exposed to simulated fracturing fluid. Despite relatively good agreement between modeled and experimental data for pH and aqueous Ca concentrations, which are strongly governed by carbonate dissolution, the model is presently unable to reproduce observed trends in aqueous Fe concentration. This is largely attributable to the dearth of thermodynamic data for certain fracture fluid components and the complex interactions between multiple Fe-bearing mineral phases. Experimental results revealed that the presence of organic fracture fluid components strongly influenced the precipitation of Fe-bearing phases, which are speculated to coat fracture fluid polymers that formed in the reactors. The incorporation of these effects in our reactive transport model will permit improved prediction of reservoir permeability evolution and metal release during hydraulic fracturing operations. [1] Stringfellow et al. (2014) J. Hazard. Mater. [2] Carroll et al. (2013) Environ. Sci. Technol. [3] Steefel and Maher (2009) Rev. Mineral. Geochem.

  9. Hydraulic fracture model and diagnostics verification at GRI/DOE multi-site projects and tight gas sand program support. Final report, July 28, 1993--February 28, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, J.E.

    1997-12-31

    The Mesaverde Group of the Piceance Basin in western Colorado has been a pilot study area for government-sponsored tight gas sand research for over twenty years. Early production experiments included nuclear stimulations and massive hydraulic fracture treatments. This work culminated in the US Department of Energy (DOE)`s Multiwell Experiment (MWX), a field laboratory designed to study the reservoir and production characteristics of low permeability sands. A key feature of MWX was an infrastructure which included several closely spaced wells that allowed detailed characterization of the reservoir through log and core analysis, and well testing. Interference and tracer tests, as well as the use of fracture diagnostics gave further information on stimulation and production characteristics. Thus, the Multiwell Experiment provided a unique opportunity for identifying the factors affecting production from tight gas sand reservoirs. The purpose of this operation was to support the gathering of field data that may be used to resolve the number of unknowns associated with measuring and modeling the dimensions of hydraulic fractures. Using the close-well infrastructure at the Multiwell Site near Rifle, Colorado, this operation focused primarily on the field design and execution of experiments. The data derived from the experiments were gathered and analyzed by DOE team contractors.

  10. Three-Dimensional poroelastic effects during hydraulic fracturing in permeable rocks

    DEFF Research Database (Denmark)

    Salimzadeh, Saeed; Paluszny, Adriana; Zimmerman, Robert W.

    2017-01-01

    -dominated, and leakoff-dominated regimes. However, for intermediate regimes, these analytical solutions cannot be used to predict the key hydraulic fracturing variables, i.e. injection pressure, fracture aperture, and length. For leakoff-dominated cases in permeable rocks, the asymptotic solutions fail to accurately...... predict the lower-bound for fracture radius and apertures, and the upper-bound for fracture pressure. This is due to the poroelastic effects in the dilated rock matrix, as well as due to the multi-dimensional flow within matrix, which in many simulation codes is idealised as being one-dimensional, normal...

  11. Modeling of fault reactivation and induced seismicity during hydraulic fracturing of shale-gas reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Rutqvist, Jonny; Rinaldi, Antonio P.; Cappa, Frédéric; Moridis, George J.

    2013-07-01

    We have conducted numerical simulation studies to assess the potential for injection-induced fault reactivation and notable seismic events associated with shale-gas hydraulic fracturing operations. The modeling is generally tuned towards conditions usually encountered in the Marcellus shale play in the Northeastern US at an approximate depth of 1500 m (~;;4,500 feet). Our modeling simulations indicate that when faults are present, micro-seismic events are possible, the magnitude of which is somewhat larger than the one associated with micro-seismic events originating from regular hydraulic fracturing because of the larger surface area that is available for rupture. The results of our simulations indicated fault rupture lengths of about 10 to 20 m, which, in rare cases can extend to over 100 m, depending on the fault permeability, the in situ stress field, and the fault strength properties. In addition to a single event rupture length of 10 to 20 m, repeated events and aseismic slip amounted to a total rupture length of 50 m, along with a shear offset displacement of less than 0.01 m. This indicates that the possibility of hydraulically induced fractures at great depth (thousands of meters) causing activation of faults and creation of a new flow path that can reach shallow groundwater resources (or even the surface) is remote. The expected low permeability of faults in producible shale is clearly a limiting factor for the possible rupture length and seismic magnitude. In fact, for a fault that is initially nearly-impermeable, the only possibility of larger fault slip event would be opening by hydraulic fracturing; this would allow pressure to penetrate the matrix along the fault and to reduce the frictional strength over a sufficiently large fault surface patch. However, our simulation results show that if the fault is initially impermeable, hydraulic fracturing along the fault results in numerous small micro-seismic events along with the propagation, effectively

  12. A Comparison between Deep and Shallow Stress Fields in Korea Using Earthquake Focal Mechanism Inversions and Hydraulic Fracturing Stress Measurements

    Science.gov (United States)

    Lee, Rayeon; Chang, Chandong; Hong, Tae-kyung; Lee, Junhyung; Bae, Seong-Ho; Park, Eui-Seob; Park, Chan

    2016-04-01

    We are characterizing stress fields in Korea using two types of stress data: earthquake focal mechanism inversions (FMF) and hydraulic fracturing stress measurements (HF). The earthquake focal mechanism inversion data represent stress conditions at 2-20 km depths, whereas the hydraulic fracturing stress measurements, mostly conducted for geotechnical purposes, have been carried out at depths shallower than 1 km. We classified individual stress data based on the World Stress Map quality ranking scheme. A total of 20 FMF data were classified into A-B quality, possibly representing tectonic stress fields. A total of 83 HF data out of compiled 226 data were classified into B-C quality, which we use for shallow stress field characterization. The tectonic stress, revealed from the FMF data, is characterized by a remarkable consistency in its maximum stress (σ1) directions in and around Korea (N79±2° E), indicating a quite uniform deep stress field throughout. On the other hand, the shallow stress field, represented by HF data, exhibits local variations in σ1 directions, possibly due to effects of topography and geologic structures such as faults. Nonetheless, there is a general similarity in σ1 directions between deep and shallow stress fields. To investigate the shallow stress field statistically, we follow 'the mean orientation and wavelength analysis' suggested by Reiter et al. (2014). After the stress pattern analysis, the resulting stress points distribute sporadically over the country, not covering the entire region evenly. In the western part of Korea, the shallow σ1directions are generally uniform with their search radius reaching 100 km, where the average stress direction agrees well with those of the deep tectonic stress. We note two noticeable differences between shallow and deep stresses in the eastern part of Korea. First, the shallow σ1 orientations are markedly non-uniform in the southeastern part of Korea with their search radius less than 25 km

  13. Microbial metabolisms in a 2.5-km-deep ecosystem created by hydraulic fracturing in shales

    Energy Technology Data Exchange (ETDEWEB)

    Daly, Rebecca A.; Borton, Mikayla A.; Wilkins, Michael J.; Hoyt, David W.; Kountz, Duncan J.; Wolfe, Richard A.; Welch, Susan A.; Marcus, Daniel N.; Trexler, Ryan V.; MacRae, Jean D.; Krzycki, Joseph A.; Cole, David R.; Mouser, Paula J.; Wrighton, Kelly C.

    2016-09-05

    Hydraulic fracturing is the industry standard for extracting hydrocarbons from shale formations. Attention has been paid to the economic benefits and environmental impacts of this process, yet the biogeochemical changes induced in the deep subsurface are poorly understood. Recent single-gene investigations revealed that halotolerant microbial communities were enriched after hydraulic fracturing. Here the reconstruction of 31 unique genomes coupled to metabolite data from the Marcellus and Utica shales revealed that methylamine cycling supports methanogenesis in the deep biosphere. Fermentation of injected chemical additives also sustains long-term microbial persistence, while sulfide generation from thiosulfate represents a poorly recognized corrosion mechanism in shales. Extensive links between viruses and microbial hosts demonstrate active viral predation, which may contribute to the release of labile cellular constituents into the extracellular environment. Our analyses show that hydraulic fracturing provides the organismal and chemical inputs for colonization and persistence in the deep terrestrial subsurface.

  14. Blade-shaped (PKN) Hydraulic Fracture Driven By A Turbulent Fluid In An Impermeable Rock

    CERN Document Server

    Zolfaghari, Navid; Bunger, Andrew P

    2016-01-01

    High flow rate, water-driven hydraulic fractures are more common now than ever in the oil and gas industry. Although the fractures are small, the high injection rate and low viscosity of the water, lead to high Reynolds numbers and potentially turbulence in the fracture. Here we present a semi-analytical solution for a blade-shaped (PKN) geometry hydraulic fracture driven by a turbulent fluid in the limit of zero fluid leak-off to the formation. We model the turbulence in the PKN fracture using the Gaukler-Manning-Strickler parametrization, which relates the the flow rate of the water to the pressure gradient along the fracture. The key parameter in this relation is the Darcy-Weisbach friction factor for the roughness of the crack wall. Coupling this turbulence parametrization with conservation of mass allows us to write a nonlinear pde for the crack width as a function of space and time. By way of a similarity ansatz, we obtain a semi-analytical solution using an orthogonal polynomial series. Embedding the a...

  15. Hydraulic fracturing fluid migration in the subsurface: A review and expanded modeling results

    Science.gov (United States)

    Birdsell, Daniel T.; Rajaram, Harihar; Dempsey, David; Viswanathan, Hari S.

    2015-09-01

    Understanding the transport of hydraulic fracturing (HF) fluid that is injected into the deep subsurface for shale gas extraction is important to ensure that shallow drinking water aquifers are not contaminated. Topographically driven flow, overpressured shale reservoirs, permeable pathways such as faults or leaky wellbores, the increased formation pressure due to HF fluid injection, and the density contrast of the HF fluid to the surrounding brine can encourage upward HF fluid migration. In contrast, the very low shale permeability and capillary imbibition of water into partially saturated shale may sequester much of the HF fluid, and well production will remove HF fluid from the subsurface. We review the literature on important aspects of HF fluid migration. Single-phase flow and transport simulations are performed to quantify how much HF fluid is removed via the wellbore with flowback and produced water, how much reaches overlying aquifers, and how much is permanently sequestered by capillary imbibition, which is treated as a sink term based on a semianalytical, one-dimensional solution for two-phase flow. These simulations include all of the important aspects of HF fluid migration identified in the literature review and are performed in five stages to faithfully represent the typical operation of a hydraulically fractured well. No fracturing fluid reaches the aquifer without a permeable pathway. In the presence of a permeable pathway, 10 times more fracturing fluid reaches the aquifer if well production and capillary imbibition are not included in the model.

  16. Determination of hydraulic fracture parameters using a non-stationary fluid injection

    Science.gov (United States)

    Valov, A. V.; Golovin, S. V.

    2016-06-01

    In this paper, one provides a theoretical justification of the possibility of hydraulic fracture parameters determination by using a non-stationary fluid injection. It is assumed that the fluid is pumped into the fractured well with the time-periodic flow rate. It is shown that there is a phase shift between waves of fluid pressure and velocity. For the modelling purposes, the length and width of the fracture are assumed to be fixed. In the case of infinite fracture, one constructs an exact solution that ensures analytical determination of the phase shift in terms of the physical parameters of the problem. In the numerical calculation, the phase shift between pressure and velocity waves is found for a finite fracture. It is shown that the value of the phase shift depends on the physical parameters and on the fracture geometry. This makes it possible to determine parameters of hydraulic fracture, in particular its length, by the experimental measurement of the time shift and comparison with the numerical solution.

  17. Microbial Community Changes in Hydraulic Fracturing Fluids and Produced Water from Shale Gas Extraction

    Energy Technology Data Exchange (ETDEWEB)

    Mohan, Arvind Murali; Hartsock, Angela; Bibby, Kyle J; Hammack, Richard W; Vidic, Radisav D; Gregory, Kelvin B

    2013-11-19

    Microbial communities associated with produced water from hydraulic fracturing are not well understood, and their deleterious activity can lead to significant increases in production costs and adverse environmental impacts. In this study, we compared the microbial ecology in prefracturing fluids (fracturing source water and fracturing fluid) and produced water at multiple time points from a natural gas well in southwestern Pennsylvania using 16S rRNA gene-based clone libraries, pyrosequencing, and quantitative PCR. The majority of the bacterial community in prefracturing fluids constituted aerobic species affiliated with the class Alphaproteobacteria. However, their relative abundance decreased in produced water with an increase in halotolerant, anaerobic/facultative anaerobic species affiliated with the classes Clostridia, Bacilli, Gammaproteobacteria, Epsilonproteobacteria, Bacteroidia, and Fusobacteria. Produced water collected at the last time point (day 187) consisted almost entirely of sequences similar to Clostridia and showed a decrease in bacterial abundance by 3 orders of magnitude compared to the prefracturing fluids and produced water samplesfrom earlier time points. Geochemical analysis showed that produced water contained higher concentrations of salts and total radioactivity compared to prefracturing fluids. This study provides evidence of long-term subsurface selection of the microbial community introduced through hydraulic fracturing, which may include significant implications for disinfection as well as reuse of produced water in future fracturing operations.

  18. Non-symmetry of a hydraulic fracture due to the inhomogeneity of the reservoir

    CERN Document Server

    Baykin, Alexey N

    2016-01-01

    It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a symmetrical fracture occurs only in a homogeneous reservoir with constant physical parameters and confining {\\it in situ} stress. Otherwise, inhomogeneity in the stress or the rock permeability can significantly change the dynamics of the fracture propagation. The mathematical model of the hydraulic fracturing used in the paper is adopted from our earlier work \\cite{Golovin_Baykin_2016_Pore}. In present paper we perform numerical experiments demonstrating that in case of non-constant confining stress or reservoir permeability the fracture is developing non-symmetrically. An important role is played by the action of the backstress that is formed near the fracture due to the pore pressure. To support this observation we give a formal definition of the backstress and compare the va...

  19. Mixed integer simulation optimization for optimal hydraulic fracturing and production of shale gas fields

    Science.gov (United States)

    Li, J. C.; Gong, B.; Wang, H. G.

    2016-08-01

    Optimal development of shale gas fields involves designing a most productive fracturing network for hydraulic stimulation processes and operating wells appropriately throughout the production time. A hydraulic fracturing network design-determining well placement, number of fracturing stages, and fracture lengths-is defined by specifying a set of integer ordered blocks to drill wells and create fractures in a discrete shale gas reservoir model. The well control variables such as bottom hole pressures or production rates for well operations are real valued. Shale gas development problems, therefore, can be mathematically formulated with mixed-integer optimization models. A shale gas reservoir simulator is used to evaluate the production performance for a hydraulic fracturing and well control plan. To find the optimal fracturing design and well operation is challenging because the problem is a mixed integer optimization problem and entails computationally expensive reservoir simulation. A dynamic simplex interpolation-based alternate subspace (DSIAS) search method is applied for mixed integer optimization problems associated with shale gas development projects. The optimization performance is demonstrated with the example case of the development of the Barnett Shale field. The optimization results of DSIAS are compared with those of a pattern search algorithm.

  20. Microbial communities in flowback water impoundments from hydraulic fracturing for recovery of shale gas

    Energy Technology Data Exchange (ETDEWEB)

    Mohan, Arvind Murali; Hartsock, Angela; Hammack, Richard W; Vidic, Radisav D; Gregory, Kelvin B

    2013-12-01

    Hydraulic fracturing for natural gas extraction from shale produces waste brine known as flowback that is impounded at the surface prior to reuse and/or disposal. During impoundment, microbial activity can alter the fate of metals including radionuclides, give rise to odorous compounds, and result in biocorrosion that complicates water and waste management and increases production costs. Here, we describe the microbial ecology at multiple depths of three flowback impoundments from the Marcellus shale that were managed differently. 16S rRNA gene clone libraries revealed that bacterial communities in the untreated and biocide-amended impoundments were depth dependent, diverse, and most similar to species within the taxa [gamma]-proteobacteria, [alpha]-proteobacteria, δ-proteobacteria, Clostridia, Synergistetes, Thermotogae, Spirochetes, and Bacteroidetes. The bacterial community in the pretreated and aerated impoundment was uniform with depth, less diverse, and most similar to known iodide-oxidizing bacteria in the [alpha]-proteobacteria. Archaea were identified only in the untreated and biocide-amended impoundments and were affiliated to the Methanomicrobia class. This is the first study of microbial communities in flowback water impoundments from hydraulic fracturing. The findings expand our knowledge of microbial diversity of an emergent and unexplored environment and may guide the management of flowback impoundments.

  1. Water usage for natural gas production through hydraulic fracturing in the United States from 2008 to 2014.

    Science.gov (United States)

    Chen, Huan; Carter, Kimberly E

    2016-04-01

    Hydraulic fracturing has promoted the exploitation of shale oil and natural gas in the United States (U.S.). However, the large amounts of water used in hydraulic fracturing may constrain oil and natural gas production in the shale plays. This study surveyed the amounts of freshwater and recycled produced water used to fracture wells from 2008 to 2014 in Arkansas, California, Colorado, Kansas, Louisiana, Montana, North Dakota, New Mexico, Ohio, Oklahoma, Pennsylvania, Texas, West Virginia, and Wyoming. Results showed that the annual average water volumes used per well in most of these states ranged between 1000 m(3) and 30,000 m(3). The highest total amount of water was consumed in Texas with 457.42 Mm(3) of water used to fracture 40,521 wells, followed by Pennsylvania with 108.67 Mm(3) of water used to treat 5127 wells. Water usages ranged from 96.85 Mm(3) to 166.10 Mm(3) annually in Texas from 2012 to 2014 with more than 10,000 wells fractured during that time. The percentage of water used for hydraulic fracturing in each state was relatively low compared to water usages for other industries. From 2009 to 2014, 6.55% (median) of the water volume used in hydraulic fracturing contained recycled produced water or recycled hydraulic fracturing wastewater. 10.84% (median) of wells produced by hydraulic fracturing were treated with recycled produced water. The percentage of wells where recycled wastewater was used was lower, except in Ohio and Arkansas, where more than half of the wells were fractured using recycled produced water. The median recycled wastewater volume in produced wells was 7127 m(3) per well, more than half the median value in annual water used per well 11,259 m(3). This indicates that, for wells recycling wastewater, more than half of their water use consisted of recycled wastewater.

  2. New development of hydraulic fracturing technique for in-situ stress measurement at great depth of mines

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In-situ stress measurement using the hydraulic fracturing technique was made at Wanfu Coal Mine in Shandong Province,China.To solve problems caused by great measuring depth and extra thick overburden soil layers in the mine,a series of improved techniques were developed for the traditional hydraulic fracturing technique and equipment to increase their pressure-enduring ability and to ensure safe and flexible removal of the sealing packers with other experimental apparatus.Successful in-situ stress measurement at 37 points within 7 boreholes,which were mostly over 1000 m deep,was completed.Through the measurement,detailed in

  3. Draft Genome Sequence of Pseudomonas sp. BDAL1 Reconstructed from a Bakken Shale Hydraulic Fracturing-Produced Water Storage Tank Metagenome

    Energy Technology Data Exchange (ETDEWEB)

    Lipus, Daniel; Ross, Daniel; Bibby, Kyle; Gulliver, Djuna

    2017-03-16

    ABSTRACT

    We report the 5,425,832 bp draft genome ofPseudomonassp. strain BDAL1, recovered from a Bakken shale hydraulic fracturing-produced water tank metagenome. Genome annotation revealed several key biofilm formation genes and osmotic stress response mechanisms necessary for survival in hydraulic fracturing-produced water.

  4. Effect of rock rheology on fluid leak- off during hydraulic fracturing

    Science.gov (United States)

    Yarushina, V. M.; Bercovici, D.; Oristaglio, M. L.

    2012-04-01

    In this communication, we evaluate the effect of rock rheology on fluid leak­off during hydraulic fracturing of reservoirs. Fluid leak-off in hydraulic fracturing is often nonlinear. The simple linear model developed by Carter (1957) for flow of fracturing fluid into a reservoir has three different regions in the fractured zone: a filter cake on the fracture face, formed by solid additives from the fracturing fluid; a filtrate zone affected by invasion of the fracturing fluid; and a reservoir zone with the original formation fluid. The width of each zone, as well as its permeability and pressure drop, is assumed to remain constant. Physical intuition suggests some straightforward corrections to this classical theory to take into account the pressure dependence of permeability, the compressibility or non-Newtonian rheology of fracturing fluid, and the radial (versus linear) geometry of fluid leak­off from the borehole. All of these refinements, however, still assume that the reservoir rock adjacent to the fracture face is non­deformable. Although the effect of poroelastic stress changes on leak-off is usually thought to be negligible, at the very high fluid pressures used in hydraulic fracturing, where the stresses exceed the rock strength, elastic rheology may not be the best choice. For example, calculations show that perfectly elastic rock formations do not undergo the degree of compaction typically seen in sedimentary basins. Therefore, pseudo-elastic or elastoplastic models are used to fit observed porosity profiles with depth. Starting from balance equations for mass and momentum for fluid and rock, we derive a hydraulic flow equation coupled with a porosity equation describing rock compaction. The result resembles a pressure diffusion equation with the total compressibility being a sum of fluid, rock and pore-space compressibilities. With linear elastic rheology, the bulk formation compressibility is dominated by fluid compressibility. But the possibility

  5. Investigation of post hydraulic fracturing well cleanup physics in the Cana Woodford Shale

    Science.gov (United States)

    Lu, Rong

    Hydraulic fracturing was first carried out in the 1940s and has gained popularity in current development of unconventional resources. Flowing back the fracturing fluids is critical to a frac job, and determining well cleanup characteristics using the flowback data can help improve frac design. It has become increasingly important as a result of the unique flowback profiles observed in some shale gas plays due to the unconventional formation characteristics. Computer simulation is an efficient and effective way to tackle the problem. History matching can help reveal some mechanisms existent in the cleanup process. The Fracturing, Acidizing, Stimulation Technology (FAST) Consortium at Colorado School of Mines previously developed a numerical model for investigating the hydraulic fracturing process, cleanup, and relevant physics. It is a three-dimensional, gas-water, coupled fracture propagation-fluid flow simulator, which has the capability to handle commonly present damage mechanisms. The overall goal of this research effort is to validate the model on real data and to investigate the dominant physics in well cleanup for the Cana Field, which produces from the Woodford Shale in Oklahoma. To achieve this goal, first the early time delayed gas production was explained and modeled, and a simulation framework was established that included all three relevant damage mechanisms for a slickwater fractured well. Next, a series of sensitivity analysis of well cleanup to major reservoir, fracture, and operational variables was conducted; five of the Cana wells' initial flowback data were history matched, specifically the first thirty days' gas and water producing rates. Reservoir matrix permeability, net pressure, Young's modulus, and formation pressure gradient were found to have an impact on the gas producing curve's shape, in different ways. Some moderately good matches were achieved, with the outcome of some unknown reservoir information being proposed using the

  6. Baseflow recession analysis in a large shale play: Climate variability and anthropogenic alterations mask effects of hydraulic fracturing

    Science.gov (United States)

    Arciniega-Esparza, Saúl; Breña-Naranjo, Jose Agustín; Hernández-Espriú, Antonio; Pedrozo-Acuña, Adrián; Scanlon, Bridget R.; Nicot, Jean Philippe; Young, Michael H.; Wolaver, Brad D.; Alcocer-Yamanaka, Victor Hugo

    2017-10-01

    Water resources development and landscape alteration exert marked impacts on water-cycle dynamics, including areas subjected to hydraulic fracturing (HF) for exploitation of unconventional oil and gas resources found in shale or tight sandstones. Here we apply a conceptual framework for linking baseflow analysis to changes in water demands from different sectors (e.g. oil/gas extraction, irrigation, and municipal consumption) and climatic variability in the semiarid Eagle Ford play in Texas, USA. We hypothesize that, in water-limited regions, baseflow (Qb) changes are partly due (along with climate variability) to groundwater abstraction. For a more realistic assessment, the analysis was conducted in two different sets of unregulated catchments, located outside and inside the Eagle Ford play. Three periods were considered in the analysis related to HF activities: pre-development (1980-2000), moderate (2001-2008) and intensive (2009-2015) periods. Results indicate that in the Eagle Ford play region, temporal changes in baseflow cannot be directly related to the increase in hydraulic fracturing. Instead, substantial baseflow declines during the intensive period of hydraulic fracturing represent the aggregated effects from the combination of: (1) a historical exceptional drought during 2011-2012; (2) increased groundwater-based irrigation; and (3) an intensive hydraulic fracturing activity.

  7. Influences of Hydraulic Fracturing on Fluid Flow and Mineralization at the Vein-Type Tungsten Deposits in Southern China

    Directory of Open Access Journals (Sweden)

    Xiangchong Liu

    2017-01-01

    Full Text Available Wolframite is the main ore mineral at the vein-type tungsten deposits in the Nanling Range, which is a world-class tungsten province. It is disputed how wolframite is precipitated at these deposits and no one has yet studied the links of the mechanical processes to fluid flow and mineralization. Finite element-based numerical experiments are used to investigate the influences of a hydraulic fracturing process on fluid flow and solubility of CO2 and quartz. The fluids are aqueous NaCl solutions and fluid pressure is the only variable controlling solubility of CO2 and quartz in the numerical experiments. Significant fluctuations of fluid pressure and high-velocity hydrothermal pulse are found once rock is fractured by high-pressure fluids. The fluid pressure drop induced by hydraulic fracturing could cause a 9% decrease of quartz solubility. This amount of quartz deposition may not cause a significant decrease in rock permeability. The fluid pressure decrease after hydraulic fracturing also reduces solubility of CO2 by 36% and increases pH. Because an increase in pH would cause a major decrease in solubility of tungsten, the fluid pressure drop accompanying a hydraulic fracturing process facilitates wolframite precipitation. Our numerical experiments provide insight into the mechanisms precipitating wolframite at the tungsten deposits in the Nanling Range as well as other metals whose solubility is strongly dependent on pH.

  8. Potential Impacts of Spilled Hydraulic Fracturing Fluid Chemicals on Water Resources: Types, volumes, and physical-chemical properties of chemicals

    Science.gov (United States)

    Hydraulic fracturing (HF) fluid chemicals spilled on-site may impact drinking water resources. While chemicals generally make up <2% of the total injected fluid composition by mass, spills may have undiluted concentrations. HF fluids typically consist of a mixture of base flui...

  9. Assessment of the Potential Impacts of Hydraulic Fracturing for Oil and Gas on Drinking Water Resources (ERD)

    Science.gov (United States)

    In this report, EPA reviews and synthesizes scientific literature to assess the potential for hydraulic fracturing for oil and gas to change the quality or quantity of drinking water resources. This report also identifies factors affecting the frequency or severity of any potenti...

  10. Assessment of the Potential Impacts of Hydraulic Fracturing for Oil and Gas on Drinking Water Resources (External Review Draft)

    Science.gov (United States)

    This assessment provides a review and synthesis of available scientific literature and data to assess the potential for hydraulic fracturing for oil and gas to impact the quality or quantity of drinking water resources, and identifies factors affecting the frequency or severity o...

  11. Influence of pore pressure to the development of a hydraulic fracture in poroelastic medium

    CERN Document Server

    Golovin, Sergey V

    2016-01-01

    In this paper we demonstrate the influence of the pore pressure to the development of a hydraulically-driven fracture in a poroelastic medium. We present a novel numerical model for propagation of a planar hydraulic fracture and prove its correctness by demonstration of the numerical convergence and by comparison with known solutions. The advantage of the algorithm is that it does not require the distinguishing of the fracture's tips and reconstruction of the numerical mesh according to the fracture propagation. Next, we perform a thorough analysis of the interplay of fluid filtration and redistribution of stresses near the fracture. We demonstrate that the fracture length decreases with the increase of the Biot's number (the parameter that determines the contribution of the pore pressure to the stress) and explain this effect by analysing the near-fracture pore pressure, rock deformation and stresses. We conclude, that the correct account for the fluid exchange between the fracture and the rock should be bas...

  12. Robust Hydraulic Fracture Monitoring (HFM) of Multiple Time Overlapping Events Using a Generalized Discrete Radon Transform

    CERN Document Server

    Ely, Gregory

    2013-01-01

    In this work we propose a novel algorithm for multiple-event localization for Hydraulic Fracture Monitoring (HFM) through the exploitation of the sparsity of the observed seismic signal when represented in a basis consisting of space time propagators. We provide explicit construction of these propagators using a forward model for wave propagation which depends non-linearly on the problem parameters - the unknown source location and mechanism of fracture, time and extent of event, and the locations of the receivers. Under fairly general assumptions and an appropriate discretization of these parameters we first build an over-complete dictionary of generalized Radon propagators and assume that the data is well represented as a linear superposition of these propagators. Exploiting this structure we propose sparsity penalized algorithms and workflow for super-resolution extraction of time overlapping multiple seismic events from single well data.

  13. Community-based risk assessment of water contamination from high-volume horizontal hydraulic fracturing.

    Science.gov (United States)

    Penningroth, Stephen M; Yarrow, Matthew M; Figueroa, Abner X; Bowen, Rebecca J; Delgado, Soraya

    2013-01-01

    The risk of contaminating surface and groundwater as a result of shale gas extraction using high-volume horizontal hydraulic fracturing (fracking) has not been assessed using conventional risk assessment methodologies. Baseline (pre-fracking) data on relevant water quality indicators, needed for meaningful risk assessment, are largely lacking. To fill this gap, the nonprofit Community Science Institute (CSI) partners with community volunteers who perform regular sampling of more than 50 streams in the Marcellus and Utica Shale regions of upstate New York; samples are analyzed for parameters associated with HVHHF. Similar baseline data on regional groundwater comes from CSI's testing of private drinking water wells. Analytic results for groundwater (with permission) and surface water are made publicly available in an interactive, searchable database. Baseline concentrations of potential contaminants from shale gas operations are found to be low, suggesting that early community-based monitoring is an effective foundation for assessing later contamination due to fracking.

  14. A time step criterion for the stable numerical simulation of hydraulic fracturing

    Science.gov (United States)

    Juan-Lien Ramirez, Alina; Löhnert, Stefan; Neuweiler, Insa

    2017-04-01

    The process of propagating or widening cracks in rock formations by means of fluid flow, known as hydraulic fracturing, has been gaining attention in the last couple of decades. There is growing interest in its numerical simulation to make predictions. Due to the complexity of the processes taking place, e.g. solid deformation, fluid flow in an open channel, fluid flow in a porous medium and crack propagation, this is a challenging task. Hydraulic fracturing has been numerically simulated for some years now [1] and new methods to take more of its processes into account (increasing accuracy) while modeling in an efficient way (lower computational effort) have been developed in recent years. An example is the use of the Extended Finite Element Method (XFEM), whose application originated within the framework of solid mechanics, but is now seen as an effective method for the simulation of discontinuities with no need for re-meshing [2]. While more focus has been put to the correct coupling of the processes mentioned above, less attention has been paid to the stability of the model. When using a quasi-static approach for the simulation of hydraulic fracturing, choosing an adequate time step is not trivial. This is in particular true if the equations are solved in a staggered way. The difficulty lies within the inconsistency between the static behavior of the solid and the dynamic behavior of the fluid. It has been shown that too small time steps may lead to instabilities early into the simulation time [3]. While the solid reaches a stationary state instantly, the fluid is not able to achieve equilibrium with its new surrounding immediately. This is why a time step criterion has been developed to quantify the instability of the model concerning the time step. The presented results were created with a 2D poroelastic model, using the XFEM for both the solid and the fluid phases. An embedded crack propagates following the energy release rate criteria when the fluid pressure

  15. Bench-mark solution for a penny-shaped hydraulic fracture driven by a thinning fluid

    CERN Document Server

    Linkov, Aleksandr

    2015-01-01

    The paper presents a solution for axisymmetric propagation of a penny-shaped crack driven by a thinning fluid. The solution to the accuracy of four significant digits, at least, is obtained on the basis of the modified formulation of hydraulic fracture problem by employing the particle velocity, rather than conventionally used flux. This serves to properly organize iterations in the opening after reducing the problem to the self-similar form. Numerical results obtained show relatively small dependence of self-similar quantities (fracture radius, propagation speed, opening, particle velocity, pressure, flux) on the behavior index of a thinning fluid. The results provide bench marks for the accuracy control of truly 3D simulators and they serve for assigning an apparent viscosity when simulating the action of a thinning fluid by replacing it with an equivalent Newtonian fluid.

  16. The Role of the Rock on Hydraulic Fracturing of Tight Shales

    Science.gov (United States)

    Suarez-Rivera, R.; Green, S.; Stanchits, S.; Yang, Y.

    2011-12-01

    Successful economic production of oil and gas from nano-darcy-range permeability, tight shale reservoirs, is achieved via massive hydraulic fracturing. This is so despite their limited hydrocarbon in place, on per unit rock volume basis. As a reference, consider a typical average porosity of 6% and an average hydrocarbon saturation of 50% to 75%. The importance of tight shales results from their large areal extent and vertical thickness. For example, the areal extent of the Anwar field in Saudi Arabia of 3230 square miles (and 300 ft thick), while the Marcellus shale alone is over 100,000 square miles (and 70 to 150 ft thick). The low permeability of the rock matrix, the predominantly mineralized rock fabric, and the high capillary forces to both brines and hydrocarbons, restrict the mobility of pore fluids in these reservoirs. Thus, one anticipates that fluids do not move very far within tight shales. Successful production, therefore results from maximizing the surface area of contact with the reservoir by massive hydraulic fracturing from horizontal bore holes. This was the conceptual breakthrough of the previous decade and the one that triggered the emergence of gas shales, and recently oily shales, as important economic sources of energy. It is now understood that the process can be made substantially more efficient, more sustainable, and more cost effective by understanding the rock. This will be the breakthrough of this decade. Microseismic monitoring, mass balance calculations, and laboratory experiments of hydraulic fracturing on tight shales indicate the development of fracture complexity and fracture propagation that can not be explained in detail in this layered heterogeneous media. It is now clear that in tight shales the large-scale formation fabric is responsible for fracture complexity. For example, the presence and pervasiveness of mineralized fractures, bed interfaces, lithologic contacts, and other types of discontinuities, and their orientation

  17. Increasing the production efficiency and reducing the environmental impacts of hydraulic fracturing

    Science.gov (United States)

    Viswanathan, H. S.

    2016-12-01

    Shale gas is an unconventional fossil energy resource profoundly impacting US energy independence and is projected to last for at least 100 years. Production of methane and other hydrocarbons from low permeability shale involves hydraulic fracturing of rock, establishing fracture connectivity, and multiphase fluid-flow and reaction processes all of which are poorly understood. The result is inefficient extraction with many environmental concerns. A science-based capability is required to quantify the governing mesoscale fluid-solid interactions, including microstructural control of fracture patterns and the interaction of engineered fluids with hydrocarbon flow. These interactions depend on coupled thermo-hydro-mechanical-chemical (THMC) processes over scales from microns to tens of meters. Determining the key mechanisms in subsurface THMC systems has been impeded due to the lack of sophisticated experimental methods to measure fracture aperture and connectivity, multiphase permeability, and chemical exchange capacities at the high temperature, pressure, and stresses present in the subsurface. In this study, we developed and prototyped the microfluidic and triaxial core flood experiments required to reveal the fundamental dynamics of fracture-fluid interactions. The goal is transformation of hydraulic fracturing from present ad hoc approaches to science-based strategies while safely enhancing production. Specifically, we have demonstrated an integrated experimental/modeling approach that allows for a comprehensive characterization of fluid-solid interactions and develop models that can be used to determine the reservoir operating conditions necessary to gain a degree of control over fracture generation, fluid flow, and interfacial processes over a range of subsurface conditions.

  18. Fluid Compressibility Effects during Hydraulic Fracture: an Opportunity for Gas Fracture Revival

    Science.gov (United States)

    Mighani, S.; Boulenouar, A.; Moradian, Z.; Evans, J. B.; Bernabe, Y.

    2015-12-01

    Hydraulic fracturing results when internal pore pressure is increased above a critical value. As the fracture extends, the fluid flows to the crack tip. The fracturing process depends strongly on the physical properties of both the porous solid and the fluid (e.g. porosity and elastic moduli for the solid, viscosity and compressibility for the fluid). It is also affected by the in-situ stress and pore pressure conditions. Here, we focus on the effect of fluid properties on hydraulic fracturing under conventional triaxial loading. Cylinders of Solnhofen limestone (a fine-grained, low permeability rock) were prepared with a central borehole through which different pressurized fluids such as oil, water or argon, were introduced. Preliminary experiments were performed using a confining pressure of 5 MPa and axial stress of 7 MPa. Our goal was to monitor fracture extension using strain gauges, acoustic emissions (AE) recording and ultrasonic velocity measurements. We also tried to compare the data with analytical models of fracture propagation. Initial tests showed that simple bi-wing fractures form when the fracturing fluid is relatively incompressible. With argon as pore fluid, a complex fracture network was formed. We also observed that the breakdown pressure was higher with argon than with less compressible fluids. After fracturing occurred, we cycled fluid pressure for several times. During the first cycles, re-opening of the fracture was associated with additional propagation. In general, it took 4 cycles to inhibit further propagation. Analytical models suggest that initial fractures occurring with compressible fluids tend to stabilize. Hence, formation and extension of additional fractures may occur, leading to a more complex morphology. Conversely, fractures formed by incompressible fluids remain critically stressed as they extend, thus producing a simple bi-wing fracture. Using compressible fracturing fluids could be a suitable candidate for an efficient

  19. Assessing the induced seismicity by hydraulic fracturing at the Wysin site (Poland)

    Science.gov (United States)

    Ángel López Comino, José; Cesca, Simone; Kriegerowski, Marius; Heimann, Sebastian; Dahm, Torsten; Mirek, Janusz; Lasocky, Stanislaw

    2017-04-01

    Induced seismicity related to industrial processes including shale gas and oil exploitation is a current issues that implies enough reasons to be concerned. Hydraulic fracturing usually induces weak events. However, scenarios with larger earthquakes are possible, e.g. if the injected fluids alter friction conditions and trigger the failure of neighbouring faults. This work is focused on a hydrofracking experiment monitored in the framework of the SHEER (SHale gas Exploration and Exploitation induced Risks) EU project at the Wysin site, located in the central-western part of the Peribaltic synclise of Pomerania, Poland. A specific network setup has been installed combining surface installation with three small-scale arrays and a shallow borehole installation. The fracking operations were carried out in June and July 2016 at a depth 4000 m. The monitoring has been operational before, during and after the termination of hydraulic fracturing operations. We apply a recently developed automated full waveform detection algorithm based on the stacking of smooth characteristic function and the identification of high coherence in the signals recorded at different stations. The method was tested with synthetic data and different detector levels yielding values of magnitude of completeness around 0.1. An unsupervised detection catalogue is generated with real data for a time period May-September 2016. We identify strong temporal changes (day/night) of the detection performance. A manual revision of the detected signals reveals that most detections are associated to local and regional seismic signals. Only two events could be assigned to the volume potentially affected by the fracking operations.

  20. Experimental study on the mechanism of hydraulic fracture growth in a glutenite reservoir

    Science.gov (United States)

    Ma, Xinfang; Zou, Yushi; Li, Ning; Chen, Ming; Zhang, Yinuo; Liu, Zizhong

    2017-04-01

    Glutenite reservoirs are frequently significantly heterogeneous because of their unique depositional environment. The presence of gravel in this type of formation complicates the growth path of hydraulic fracture (HF). In this study, laboratory fracturing experiments were conducted on six large natural glutenite specimens (300 mm × 300 mm × 300 mm) using a true triaxial hydraulic fracturing system to investigate the growth law of HF in glutenite reservoirs. Before the experiments were performed, the rock properties of the gravel particles and matrix in the glutenite specimens were determined using various apparatuses. The effects of gravel size, horizontal differential stress, fracturing fluid type (or viscosity), and flow rate on the HF growth pattern, fracture width, and injection pressure were examined in detail. Similar to previous studies, four types of HF intersections with gravel particles, namely, termination, penetration, deflection, and attraction, were observed. The HF growth path in the glutenite specimens with large gravel (40 mm-100 mm) is likely branched and tortuous even under high horizontal differential stress. The HF growth path in the glutenite specimens with small gravel (less than 20 mm) is simple, but a process zone with multiple thin fractures may be created. Breakdown pressure may increase significantly when HF initiates from high-strength gravel particles, which are mainly composed of quartz. HF propagation is likely limited within high-strength gravel particles, thereby resulting in narrow fractures and even termination. The use of low-viscosity fluids, such as slickwater, and the low injection rate can further limit HF growth, particularly its width. As a response, high extension pressure builds up during fracturing.

  1. A decision analysis framework for estimating the potential hazards for drinking water resources of chemicals used in hydraulic fracturing fluids.

    Science.gov (United States)

    Yost, Erin E; Stanek, John; Burgoon, Lyle D

    2017-01-01

    Despite growing concerns over the potential for hydraulic fracturing to impact drinking water resources, there are limited data available to identify chemicals used in hydraulic fracturing fluids that may pose public health concerns. In an effort to explore these potential hazards, a multi-criteria decision analysis (MCDA) framework was employed to analyze and rank selected subsets of these chemicals by integrating data on toxicity, frequency of use, and physicochemical properties that describe transport in water. Data used in this analysis were obtained from publicly available databases compiled by the United States Environmental Protection Agency (EPA) as part of a larger study on the potential impacts of hydraulic fracturing on drinking water. Starting with nationwide hydraulic fracturing chemical usage data from EPA's analysis of the FracFocus Chemical Disclosure Registry 1.0, MCDAs were performed on chemicals that had either noncancer toxicity values (n=37) or cancer-specific toxicity values (n=10). The noncancer MCDA was then repeated for subsets of chemicals reported in three representative states (Texas, n=31; Pennsylvania, n=18; and North Dakota, n=20). Within each MCDA, chemicals received scores based on relative toxicity, relative frequency of use, and physicochemical properties (mobility in water, volatility, persistence). Results show a relative ranking of these chemicals based on hazard potential, and provide preliminary insight into chemicals that may be more likely than others to impact drinking water resources. Comparison of nationwide versus state-specific analyses indicates regional differences in the chemicals that may be of more concern to drinking water resources, although many chemicals were commonly used and received similar overall hazard rankings. Several chemicals highlighted by these MCDAs have been reported in groundwater near areas of hydraulic fracturing activity. This approach is intended as a preliminary analysis, and represents one

  2. Hydrodynamic analysis of clastic injection and hydraulic fracturing structures in the Jinding Zn-Pb deposit, Yunnan, China

    Directory of Open Access Journals (Sweden)

    Guoxiang Chi

    2012-01-01

    Full Text Available The Jinding Zn-Pb deposit has been generally considered to have formed from circulating basinal fluids in a relatively passive way, with fluid flow being controlled by structures and sedimentary facies, similar to many other sediments-hosted base metal deposits. However, several recent studies have revealed the presence of sand injection structures, intrusive breccias, and hydraulic fractures in the open pit of the Jinding deposit and suggested that the deposit was formed from explosive release of overpressured fluids. This study reports new observations of fluid overpressure-related structures from underground workings (Paomaping and Fengzishan, which show clearer crosscutting relationships than in the open pit. The observed structures include: 1 sand (±rock fragment dikes injecting into fractures in solidified rocks; 2 sand (±rock fragment bodies intruding into unconsolidated or semi-consolidated sediments; 3 disintegrated semi-consolidated sand bodies; and 4 veins and breccias formed from hydraulic fracturing of solidified rocks followed by cementation of hydrothermal minerals. The development of ore minerals (sphalerite in the cement of the various clastic injection and hydraulic fractures indicate that these structures were formed at the same time as mineralization. The development of hydraulic fractures and breccias with random orientation indicates small differential stress during mineralization, which is different from the stress field with strong horizontal shortening prior to mineralization. Fluid flow velocity may have been up to more than 11 m/s based on calculations from the size of the fragments in the clastic dikes. The clastic injection and hydraulic fracturing structures are interpreted to have formed from explosive release of overpressured fluids, which may have been related to either magmatic intrusions at depth or seismic activities that episodically tapped an overpressured fluid reservoir. Because the clastic injection

  3. Environmental aspects of hydraulic fracturing - Main results and recommendations from two studies on behalf of the German Environment Agency

    Science.gov (United States)

    Krischbaum, Bernd; Bertram, Andreas; Böttcher, Christian; Iyimen-Schwarz, Züleyha; Rechenberg, Jörg; Dannwolf, Uwe; Meiners, Georg

    2016-04-01

    The German Environment Agency (UBA) accompanies the debate on fracking for years. Two major reports on risks and environmental impacts regarding the exploration and exploitation of unconventional natural gas, in particular shale gas have been published. On the basis of these studies as well as on scientific evidence UBA considers ecological barriers as a sustainable means to minimize the risks to environment and human health. 1) Recent studies show that the contamination of shallow aquifers by rise of fluids through natural faults or artificially created fractures is extremely unlikely. However, activities on the surface and lack of wellbore integrity pose threats and substantial risks for the quality of shallow aquifers. 2) The need for thorough groundwater monitoring is fully accepted, yet its range and design is subject to discussion. 3) Formerly, analysis and mass balances of flowback and produced water have been insufficient, thus there is a lack of exact information on proportions of frac-fluids, flowback and formation water respectively, as well as data on possible reaction products. 4) Currently, neither on national nor on European level best reference techniques (BREF) for the treatment and disposal of flowback and produced water are available. 5) In addition, land consumption, emission of greenhouse gases, and induced seismicity are major issues. UBA recommends amongst others the implementation of an environmental impact assessment (EIA) for fracking activities, the prohibition of fracking in water protection areas as well as their catchments, and the disclosure of all frac-fluid chemicals within a national chemical registry. To achieve these objectives the German Environment Agency suggests a step-by-step approach. The paper will present the main results from the studies and the recommendations of the German Environment Agency regarding hydraulic fracturing for unconventional gas exploitation.

  4. Rock specific hydraulic fracturing and matrix acidizing to enhance a geothermal system — Concepts and field results

    Science.gov (United States)

    Zimmermann, Günter; Blöcher, Guido; Reinicke, Andreas; Brandt, Wulf

    2011-04-01

    Enhanced geothermal systems (EGS) are engineered reservoirs developed to extract economic amounts of heat from low permeability and/or porosity geothermal resources. To enhance the productivity of reservoirs, a site specific concept is necessary to actively make reservoir conditions profitable using specially adjusted stimulation treatments, such as multi fracture concepts and site specific well path design. The results of previously performed stimulation treatments in the geothermal research well GtGrSk4/05 at Groß Schönebeck, Germany are presented. The reservoir is located at a 4100-4300 m depth within the Lower Permian of the NE German Basin with a bottom-hole temperature of 150 °C. The reservoir rock is classified by two lithological units from bottom to top: volcanic rocks (andesitic rocks) and siliciclastics ranging from conglomerates to fine-grained sandstones (fluvial sediments). The stimulation treatments included multiple hydraulic stimulations and an acid treatment. In order to initiate a cross-flow from the sandstone layer, the hydraulic stimulations were performed in different depth sections (two in the sandstone section and one in the underlying volcanic section). In low permeability volcanic rocks, a cyclic hydraulic fracturing treatment was performed over 6 days in conjunction with adding quartz in low concentrations to maintain a sustainable fracture performance. Flow rates of up to 150 l/s were realized, and a total of 13,170 m 3 of water was injected. A hydraulic connection to the sandstone layer was successfully achieved in this way. However, monitoring of the water level in the offsetting well EGrSk3/90, which is 475 m apart at the final depth, showed a very rapid water level increase due to the stimulation treatment. This can be explained by a connected fault zone within the volcanic rocks. Two gel-proppant treatments were performed in the slightly higher permeability sandstones to obtain long-term access to the reservoir rocks. During each

  5. Natural hydraulic fractures and the mechanical stratigraphy of shale-dominated strata

    Science.gov (United States)

    Imber, Jonathan; Armstrong, Howard; Atar, Elizabeth; Clancy, Sarah; Daniels, Susan; Grattage, Joshua; Herringshaw, Liam; Trabucho-Alexandre, João; Warren, Cassandra; Wille, Jascha; Yahaya, Liyana

    2016-04-01

    The aim of this study is to investigate stratigraphic variations in the spatial distribution and density of natural hydraulic and other fractures within oil mature, shale-dominated strata from the Cleveland Basin, northeast England. The studied interval includes the Pliensbachian Cleveland Ironstone and Toarcian Whitby Mudstone Formations. The Cleveland Ironstone Formation (ca. 25m thick) consists of silt- and mudstone units with discrete ironstone layers (seams). Ironstones account for 20% of the thickness of the formation. The Whitby Mudstone Formation is up to ca. 100 m thick; up to 2% of its total thickness consists of discrete calcium carbonate horizons, such as the Top Jet Dogger. Natural hydraulic fractures, characterised by plumose marks and concentric arrest lines on fracture surfaces are ubiquitous throughout both formations; shear fractures with mm- to cm-scale displacements occur locally, particularly within silt- and mudstones. Natural hydraulic fractures locally contain thin, sometimes fibrous, calcite fills and are commonly observed to terminate at bedding plane interfaces between silt- or mudstone and carbonate beds. We have recorded fracture locations and apertures along 139 transects in both shale (i.e. silt- and mudstone intervals) and carbonate strata. Natural hydraulic and shear fractures, measured along transects up to 50m long within all lithologies in both formations, typically display uniform distributions. There is no correlation between spacing distribution and bulk extension in any lithology. Median fracture densities recorded within the Cleveland Ironstone Formation are higher in intervening ironstone beds (<2.1 fractures per m in ironstone layers) compared with dominant shales (<0.9 fractures per m in silt- and mudstones). A qualitatively similar pattern occurs within the Whitby Mudstone Formation. However, the absolute values of median fracture density within different members of the Whitby Mudstone Formation range from 2

  6. Reactivity of Dazomet, a Hydraulic Fracturing Additive: Hydrolysis and Interaction with Pyrite

    Science.gov (United States)

    Consolazio, N.; Lowry, G. V.; Karamalidis, A.; Hakala, A.

    2015-12-01

    The Marcellus Shale is currently the largest shale gas formation in play across the world. The low-permeability formation requires hydraulic fracturing to be produced. In this process, millions of gallons of water are blended with chemical additives and pumped into each well to fracture the reservoir rock. Although additives account for less than 2% of the fracking fluid mixture, they amount to hundreds of tons per frack job. The environmental properties of some of these additives have been studied, but their behavior under downhole conditions is not widely reported in the peer-reviewed literature. These compounds and their reaction products may return to the surface as produced or waste water. In the event of a spill or release, this water has the potential to contaminate surface soil and water. Of these additives, biocides may present a formidable challenge to water quality. Biocides are toxic compounds (by design), typically added to the Marcellus Shale to control bacteria in the well. An assessment of the most frequently used biocides indicated a need to study the chemical dazomet under reservoir conditions. The Marcellus Shale contains significant deposits of pyrite. This is a ubiquitous mineral within black shales that is known to react with organic compounds in both oxic and anoxic settings. Thus, the objective of our study was to determine the effect of pyrite on the hydrolysis of dazomet. Liquid chromatography-triple quadrupole mass spectrometry (LC-QQQ) was used to calculate the loss rate of aqueous dazomet. Gas chromatography-mass spectrometry (GC-MS) was used to identify the reaction products. Our experiments show that in water, dazomet rapidly hydrolyses in water to form organic and inorganic transformation products. This reaction rate was unaffected when performed under anoxic conditions. However, with pyrite we found an appreciable increase in the removal rate of dazomet. This was accompanied by a corresponding change in the distribution of observed

  7. A New Physics-Based Modeling of Multiple Non-Planar Hydraulic Fractures Propagation

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Jing [University of Utah; Huang, Hai [Idaho National Lab. (INL), Idaho Falls, ID (United States); Deo, Milind [University of Utah; Jiang, Shu [Energy & Geoscience Institute

    2015-10-01

    Because of the low permeability in shale plays, closely spaced hydraulic fractures and multilateral horizontal wells are generally required to improve production. Therefore, understanding the potential fracture interaction and stress evolution is critical in optimizing fracture/well design and completion strategy in multi-stage horizontal wells. In this paper, a novel fully coupled reservoir flow and geomechanics model based on the dual-lattice system is developed to simulate multiple non-planar fractures propagation. The numerical model from Discrete Element Method (DEM) is used to simulate the mechanics of fracture propagations and interactions, while a conjugate irregular lattice network is generated to represent fluid flow in both fractures and formation. The fluid flow in the formation is controlled by Darcy’s law, but within fractures it is simulated by using cubic law for laminar flow through parallel plates. Initiation, growth and coalescence of the microcracks will lead to the generation of macroscopic fractures, which is explicitly mimicked by failure and removal of bonds between particles from the discrete element network. We investigate the fracture propagation path in both homogeneous and heterogeneous reservoirs using the simulator developed. Stress shadow caused by the transverse fracture will change the orientation of principal stress in the fracture neighborhood, which may inhibit or alter the growth direction of nearby fracture clusters. However, the initial in-situ stress anisotropy often helps overcome this phenomenon. Under large in-situ stress anisotropy, the hydraulic fractures are more likely to propagate in a direction that is perpendicular to the minimum horizontal stress. Under small in-situ stress anisotropy, there is a greater chance for fractures from nearby clusters to merge with each other. Then, we examine the differences in fracture geometry caused by fracturing in cemented or uncemented wellbore. Moreover, the impact of

  8. Experimental Study of Crack Initiation and Extension Induced by Hydraulic Fracturing in a Tree-Type Borehole Array

    Directory of Open Access Journals (Sweden)

    Yiyu Lu

    2016-06-01

    Full Text Available High-pressure hydraulic fracturing technology in coal and coal bed methane mines can lead to roof and floor damage, and fracture initiation disorder that leads to a “blank area”, and other issues. A new method of hydraulic fracturing is proposed to increase the homogeneous permeability of coal in underground coalmines. Numerical and other simulation tests for different forms of a tree-type, branched borehole model are presented. The results show that the branched array causes cracks to initiate from the bottom of the array, and these extend along the direction of the adjacent boreholes. Generally, as the number of branched boreholes increases, the coal seam fracture network also increase, improving the distribution of the fracture network, making the fracturing effect better. The branched boreholes appear to reduce initiation pressure and, with increasing branches, the initiation pressure decreases. A model with four tree-type, branched boreholes leads to a reduction in initiation pressure of 69%. In terms of permeability improvement technology in underground coalmines, a branched hydraulic fracturing borehole array has the advantages of reducing initiation pressure, controlling crack initiation and extension, enhancing the fracturing effect and reducing the destruction of the roof and floor.

  9. A systematic evaluation of chemicals in hydraulic-fracturing fluids and wastewater for reproductive and developmental toxicity.

    Science.gov (United States)

    Elliott, Elise G; Ettinger, Adrienne S; Leaderer, Brian P; Bracken, Michael B; Deziel, Nicole C

    2017-01-01

    Hydraulic-fracturing fluids and wastewater from unconventional oil and natural gas development contain hundreds of substances with the potential to contaminate drinking water. Challenges to conducting well-designed human exposure and health studies include limited information about likely etiologic agents. We systematically evaluated 1021 chemicals identified in hydraulic-fracturing fluids (n=925), wastewater (n=132), or both (n=36) for potential reproductive and developmental toxicity to triage those with potential for human health impact. We searched the REPROTOX database using Chemical Abstract Service registry numbers for chemicals with available data and evaluated the evidence for adverse reproductive and developmental effects. Next, we determined which chemicals linked to reproductive or developmental toxicity had water quality standards or guidelines. Toxicity information was lacking for 781 (76%) chemicals. Of the remaining 240 substances, evidence suggested reproductive toxicity for 103 (43%), developmental toxicity for 95 (40%), and both for 41 (17%). Of these 157 chemicals, 67 had or were proposed for a federal water quality standard or guideline. Our systematic screening approach identified a list of 67 hydraulic fracturing-related candidate analytes based on known or suspected toxicity. Incorporation of data on potency, physicochemical properties, and environmental concentrations could further prioritize these substances for future drinking water exposure assessments or reproductive and developmental health studies.

  10. A reactive transport modelling approach to assess the leaching potential of hydraulic fracturing fluids associated with coal seam gas extraction

    Science.gov (United States)

    Mallants, Dirk; Simunek, Jirka; Gerke, Kirill

    2015-04-01

    Coal Seam Gas production generates large volumes of "produced" water that may contain compounds originating from the use of hydraulic fracturing fluids. Such produced water also contains elevated concentrations of naturally occurring inorganic and organic compounds, and usually has a high salinity. Leaching of produced water from storage ponds may occur as a result of flooding or containment failure. Some produced water is used for irrigation of specific crops tolerant to elevated salt levels. These chemicals may potentially contaminate soil, shallow groundwater, and groundwater, as well as receiving surface waters. This paper presents an application of scenario modelling using the reactive transport model for variably-saturated media HP1 (coupled HYDRUS-1D and PHREEQC). We evaluate the fate of hydraulic fracturing chemicals and naturally occurring chemicals in soil as a result of unintentional release from storage ponds or when produced water from Coal Seam Gas operations is used in irrigation practices. We present a review of exposure pathways and relevant hydro-bio-geo-chemical processes, a collation of physico-chemical properties of organic/inorganic contaminants as input to a set of generic simulations of transport and attenuation in variably saturated soil profiles. We demonstrate the ability to model the coupled processes of flow and transport in soil of contaminants associated with hydraulic fracturing fluids and naturally occurring contaminants.

  11. Coupled hydro-thermo-mechanical modeling of hydraulic fracturing in quasi-brittle rocks using BPM-DEM

    Directory of Open Access Journals (Sweden)

    Ingrid Tomac

    2017-02-01

    Full Text Available This paper presents an improved understanding of coupled hydro-thermo-mechanical (HTM hydraulic fracturing of quasi-brittle rock using the bonded particle model (BPM within the discrete element method (DEM. BPM has been recently extended by the authors to account for coupled convective–conductive heat flow and transport, and to enable full hydro-thermal fluid–solid coupled modeling. The application of the work is on enhanced geothermal systems (EGSs, and hydraulic fracturing of hot dry rock (HDR is studied in terms of the impact of temperature difference between rock and a flowing fracturing fluid. Micro-mechanical investigation of temperature and fracturing fluid effects on hydraulic fracturing damage in rocks is presented. It was found that fracture is shorter with pronounced secondary microcracking along the main fracture for the case when the convective–conductive thermal heat exchange is considered. First, the convection heat exchange during low-viscosity fluid infiltration in permeable rock around the wellbore causes significant rock cooling, where a finger-like fluid infiltration was observed. Second, fluid infiltration inhibits pressure rise during pumping and delays fracture initiation and propagation. Additionally, thermal damage occurs in the whole area around the wellbore due to rock cooling and cold fluid infiltration. The size of a damaged area around the wellbore increases with decreasing fluid dynamic viscosity. Fluid and rock compressibility ratio was found to have significant effect on the fracture propagation velocity.

  12. An Analytical Solution of Partially Penetrating Hydraulic Fractures in a Box-Shaped Reservoir

    Directory of Open Access Journals (Sweden)

    He Zhang

    2015-01-01

    Full Text Available This paper presents a new method to give an analytical solution in Laplace domain directly that is used to describe pressure transient behavior of partially penetrating hydraulic fractures in a box-shaped reservoir with closed boundaries. The basic building block of the method is to solve diffusivity equation with the integration of Dirac function over the distance that is presented for the first time. Different from the traditional method of using the source solution and Green’s function presented by Gringarten and Ramey, this paper uses Laplace transform and Fourier transform to solve the diffusivity equation and the analytical solution obtained is accurate and simple. The effects of parameters including fracture height, fracture length, the position of the fracture, and reservoir width on the pressure and pressure derivative are fully investigated. The advantage of the analytical solution is easy to incorporate storage coefficient and skin factor. It can also reduce the amount of computation and compute efficiently and quickly.

  13. Hydraulic Fracture Growth in a Layered Formation based on Fracturing Experiments and Discrete Element Modeling

    Science.gov (United States)

    Yushi, Zou; Xinfang, Ma; Tong, Zhou; Ning, Li; Ming, Chen; Sihai, Li; Yinuo, Zhang; Han, Li

    2017-09-01

    Hydraulic fracture (HF) height containment tends to occur in layered formations, and it significantly influences the entire HF geometry or the stimulated reservoir volume. This study aims to explore the influence of preexisting bedding planes (BPs) on the HF height growth in layered formations. Laboratory fracturing experiments were performed to confirm the occurrence of HF height containment in natural shale that contains multiple weak and high-permeability BPs under triaxial stresses. Numerical simulations were then conducted to further illustrate the manner in which vertical stress, BP permeability, BP density(or spacing), pump rate, and fluid viscosity control HF height growth using a 3D discrete element method-based fracturing model. In this model, the rock matrix was considered transversely isotropic and multiple BPs can be explicitly represented. Experimental and numerical results show that the vertically growing HF tends to be limited by multi-high-permeability BPs, even under higher vertical stress. When the vertically growing HF intersects with the multi-high-permeability BPs, the injection pressure will be sharply reduced. If a low pumping rate or a low-viscosity fluid is used, the excess fracturing fluid leak-off into the BPs obviously decreases the rate of pressure build up, which will then limit the growth of HF. Otherwise, a higher pumping rate and/or a higher viscosity will reduce the leak-off time and fluid volume, but increase the injection pressure to drive the HF to grow and to penetrate through the BPs.

  14. Injection of radioactive waste by hydraulic fracturing at West Valley, New York. Volume 2. Text

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    Results of a preliminary study are presented of the technical feasibility of radioactive waste disposal by hydraulic fracturing and injection into shale formations below the Nuclear Fuel Services Incorporated site at West Valley, New York. At this time there are approximately 600,000 gallons of high level neutralized Purex waste, including both the supernate (liquid) and sludge, and a further 12,000 gallons of acidic Thorex waste stored in tanks at the West Valley facilities. This study assesses the possibility of combining these wastes in a suitable grout mixture and then injecting them into deep shale formations beneath the West Valley site as a means of permanent disposal. The preliminary feasibility assessment results indicated that at the 850 to 1,250 feet horizons, horizontal fracturing and injection could be effectively achieved. However, a detailed safety analysis is required to establish the acceptability of the degree of isolation. The principal concerns regarding isolation are due to existing and possible future water supply developments within the area and the local effects of the buried valley. In addition, possible future natural gas developments are of concern. The definition of an exclusion zone may be appropriate to avoid problems with these developments. The buried valley may require the injections to be limited to the lower horizon depending on the results of further investigations.

  15. Proppant backproduction during hydraulic fracturing -- A new failure mechanism for resin-coated proppants

    Energy Technology Data Exchange (ETDEWEB)

    Vreeburg, R.J.; Roodhart, L.P.; Davies, D.R.; Penny, G.S. (STIM-LAB Inc., Duncan, OK (United States))

    1994-10-01

    Backproduction of proppant from hydraulically fractured wells, particularly those completed in the northern European Rotliegend formation, is a major operational problem, necessitating costly and manpower-intensive surface-handling procedures. Further, the development of unmanned platform operations offshore, required in today's economic climate, is impossible as long as this problem remains unsolved. The most cost-effective potential solution to this problem is provided by curable resin-coated proppant (RCP), which consolidates in the fracture. Early field trials with RCP's, however, were not completely effective in stopping the backproduction of proppant. Typically, some 10% of the total volume of RCP placed in the fracture was backproduced. The authors performed a laboratory study to help clarify the effect of curing temperature, water production rate, proppant size, and stress cycling on the integrity of RCP packs. The experiments confirmed the field experience that stress cycling has a dramatic effect on proppant backproduction of commercial RCP packs. The number of applied stress cycles (i.e., the number of times the well is shut in) and the initial RCP pack strength appear to be the dominant factors that govern proppant backproduction. Dedicated experiments are therefore required to evaluate the use of RCP's to eliminate proppant backproduction for a particular field application.

  16. Dispersion analysis of passive surface-wave noise generated during hydraulic-fracturing operations

    Science.gov (United States)

    Forghani-Arani, Farnoush; Willis, Mark; Snieder, Roel; Haines, Seth S.; Behura, Jyoti; Batzle, Mike; Davidson, Michael

    2014-01-01

    Surface-wave dispersion analysis is useful for estimating near-surface shear-wave velocity models, designing receiver arrays, and suppressing surface waves. Here, we analyze whether passive seismic noise generated during hydraulic-fracturing operations can be used to extract surface-wave dispersion characteristics. Applying seismic interferometry to noise measurements, we extract surface waves by cross-correlating several minutes of passive records; this approach is distinct from previous studies that used hours or days of passive records for cross-correlation. For comparison, we also perform dispersion analysis for an active-source array that has some receivers in common with the passive array. The active and passive data show good agreement in the dispersive character of the fundamental-mode surface-waves. For the higher mode surface waves, however, active and passive data resolve the dispersive properties at different frequency ranges. To demonstrate an application of dispersion analysis, we invert the observed surface-wave dispersion characteristics to determine the near-surface, one-dimensional shear-wave velocity.

  17. Numerical simulation of hydraulic fracturing and associated microseismicity using finite-discrete element method

    Institute of Scientific and Technical Information of China (English)

    Qi Zhao; Andrea Lisjak; Omid Mahabadi; Qinya Liu; Giovanni Grasselli

    2014-01-01

    Hydraulic fracturing (HF) technique has been extensively used for the exploitation of unconventional oil and gas reservoirs. HF enhances the connectivity of less permeable oil and gas-bearing rock formations by fluid injection, which creates an interconnected fracture network and increases the hydrocarbon production. Meanwhile, microseismic (MS) monitoring is one of the most effective approaches to eval-uate such stimulation process. In this paper, the combined finite-discrete element method (FDEM) is adopted to numerically simulate HF and associated MS. Several post-processing tools, including frequency-magnitude distribution (b-value), fractal dimension (D-value), and seismic events clustering, are utilized to interpret numerical results. A non-parametric clustering algorithm designed specifically for FDEM is used to reduce the mesh dependency and extract more realistic seismic information. Simulation results indicated that at the local scale, the HF process tends to propagate following the rock mass discontinuities; while at the reservoir scale, it tends to develop in the direction parallel to the maximum in-situ stress.

  18. Hydraulic fracturing offers view of microbial life in the deep terrestrial subsurface.

    Science.gov (United States)

    Mouser, Paula J; Borton, Mikayla; Darrah, Thomas H; Hartsock, Angela; Wrighton, Kelly C

    2016-11-01

    Horizontal drilling and hydraulic fracturing are increasingly used for recovering energy resources in black shales across the globe. Although newly drilled wells are providing access to rocks and fluids from kilometer depths to study the deep biosphere, we have much to learn about microbial ecology of shales before and after 'fracking'. Recent studies provide a framework for considering how engineering activities alter this rock-hosted ecosystem. We first provide data on the geochemical environment and microbial habitability in pristine shales. Next, we summarize data showing the same pattern across fractured shales: diverse assemblages of microbes are introduced into the subsurface, eventually converging to a low diversity, halotolerant, bacterial and archaeal community. Data we synthesized show that the shale microbial community predictably shifts in response to temporal changes in geochemistry, favoring conservation of key microorganisms regardless of inputs, shale location or operators. We identified factors that constrain diversity in the shale and inhibit biodegradation at the surface, including salinity, biocides, substrates and redox. Continued research in this engineered ecosystem is required to assess additive biodegradability, quantify infrastructure biocorrosion, treat wastewaters that return to the surface and potentially enhance energy production through in situ methanogenesis.

  19. Estimates of hydraulic fracturing (Frac) sand production, consumption, and reserves in the United States

    Science.gov (United States)

    Bleiwas, Donald I.

    2015-01-01

    The practice of fracturing reservoir rock in the United States as a method to increase the flow of oil and gas from wells has a relatively long history and can be traced back to 1858 in Fredonia, New York, when a gas well situated in shale of the Marcellus Formation was successfully fractured using black powder as a blasting agent. Nearly all domestic hydraulic fracturing, often referred to as hydrofracking or fracking, is a process where fluids are injected under high pressure through perforations in the horizontal portion of a well casing in order to generate fractures in reservoir rock with low permeability (“tight”). Because the fractures are in contact with the well bore they can serve as pathways for the recovery of gas and oil. To prevent the fractures generated by the fracking process from closing or becoming obstructed with debris, material termed “proppant,” most commonly high-silica sand, is injected along with water-rich fluids to maintain or “prop” open the fractures. The first commercial application of fracking in the oil and gas industry took place in Oklahoma and Texas during the 1940s. In 1949, over 300 wells, mostly vertical, were fracked (ALL Consulting, LLC, 2012; McGee, 2012; Veil, 2012) and used silica sand as a proppant (Fracline, 2011). The resulting increase in well productivity demonstrated the significant potential that fracking might have for the oil and gas industry.

  20. Ground gas monitoring: implications for hydraulic fracturing and CO2 storage.

    Science.gov (United States)

    Teasdale, Christopher J; Hall, Jean A; Martin, John P; Manning, David A C

    2014-12-02

    Understanding the exchange of carbon dioxide (CO2) and methane (CH4) between the geosphere and atmosphere is essential for the management of anthropogenic emissions. Human activities such as carbon capture and storage and hydraulic fracturing ("fracking") affect the natural system and pose risks to future global warming and to human health and safety if not engineered to a high standard. In this paper an innovative approach of expressing ground gas compositions is presented, using data derived from regulatory monitoring of boreholes in the unsaturated zone at infrequent intervals (typically 3 months) with data from a high frequency monitoring instrument deployed over periods of weeks. Similar highly variable trends are observed for time scales ranging from decades to hourly for boreholes located close to sanitary landfill sites. Additionally, high frequency monitoring data confirm the effect of meteorological controls on ground gas emissions; the maximum observed CH4 and CO2 concentrations in a borehole monitored over two weeks were 40.1% v/v and 8.5% v/v respectively, but for 70% of the monitoring period only air was present. There is a clear weakness in current point monitoring strategies that may miss emission events and this needs to be considered along with obtaining baseline data prior to starting any engineering activity.

  1. The Water Risks of Hydraulic Fracturing (Fracking): Key Issues from the New California Assessment

    Science.gov (United States)

    Gleick, P. H.

    2015-12-01

    A key component of the Water-Energy Nexus is the effort over the past decade or so to quantify the volumes and form of water required for the energy fuel cycle from extraction to generation to waste disposal. The vast majority of the effort in this area has focused on the water needs of electricity generation, but other fuel-cycle components also entail significant water demands and threats to water quality. Recent work for the State of California (managed by the California Council on Science and Technology - CCST) has produced a new state-of-the-art assessment of a range of potential water risks associated with hydraulic fracturing and related oil and gas extraction, including volumetric water demands, methods of disposal of produced water, and aquifer contamination. For example, this assessment produced new information on the disposal of produced water in surface percolation pits and the potential for contamination of local groundwater (see Figure). Understanding these risks raises questions about current production and future plans to expand production, as well as tools used by state and federal agencies to manage these risks. This talk will summarize the science behind the CCST assessment and related policy recommendations for both water and energy managers.

  2. Identification of polypropylene glycols and polyethylene glycol carboxylates in flowback and produced water from hydraulic fracturing.

    Science.gov (United States)

    Thurman, E Michael; Ferrer, Imma; Rosenblum, James; Linden, Karl; Ryan, Joseph N

    2017-02-05

    The purpose of the study was to separate and identify the unknown surfactants present in flowback and produced water from oil and gas wells in the Denver-Julesburg Basin (Niobrara Formation) in Weld County, Colorado, USA. Weld County has been drilled extensively during the last five years for oil and gas between 7000-8000 feet below land-surface. Polypropylene glycols (PPGs) and polyethylene glycols carboxylates (PEG-Cs) were found for the first time in these flowback and produced water samples. These ethoxylated surfactants may be used as friction reducers, clay stabilizers, and surfactants. Ultrahigh-performance liquid chromatography/quadrupole-time-of-flight mass spectrometry (UHPLC/QTOF-MS) was used to separate and identify the different classes of PPGs, PEG-Cs, and their isomers. The Kendrick mass scale was applied along with mass spectrometry/mass spectrometry (MS-MS) with accurate mass for rapid and unequivocal identification. The PPGs and their isomers occur at the ppm concentration range and may be useful as "fingerprints" of hydraulic-fracturing. Comparing these detections to the compounds used in the fracturing process from FracFocus 3.0 (https://fracfocus.org), it appears that both PPGs and polyethylene glycols (PEGs) are commonly named as additives, but the PEG-Cs have not been reported. The PEG-Cs may be trace impurities or degradation products of PEGs.

  3. Some effects of stress, friction and fluid flow on hydraulic fracturing

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, M.E.; Anderson, G.D.; Shaffer, R.J.; Thorson, L.D.

    1981-03-01

    We are conducting a DOE funded research program which is aimed at understanding the hydraulic fracturing process, especially those phenomena and parameters which strongly affect or control the fracture geometry. Our theoretical and experimental studies consistently confirm the well known fact that in-situ stress has a primary effect on fracture geometry and that fractures propagate perpendicular to the least principal stress. In addition, we find that frictional interfaces in reservoirs can affect fracturing. We have also quantified some of the effects on fracture geometry due to frictional slippage along interfaces. We found that variation of friction along an interface can result in abrupt steps in the fracture path. These effects have been seen in the mine back of emplaced fractures and are demonstrated both theoretically and in the laboratory. Further experiments and calculations are starting to indicate the possible control of the fracture height by the vertical change in the cables to X-608A wells should be replaced, and develop v across categories of persons affected. Respondents were selected according to a purposive sampling strategy, wn are also included. The management plan for the operation of the plant is discussed. (DMC)

  4. Source and fate of hydraulic fracturing water in the Barnett Shale: a historical perspective.

    Science.gov (United States)

    Nicot, Jean-Philippe; Scanlon, Bridget R; Reedy, Robert C; Costley, Ruth A

    2014-02-18

    Considerable controversy continues about water availability for and potential impacts of hydraulic fracturing (HF) of hydrocarbon assets on water resources. Our objective was to quantify HF water volume in terms of source, reuse, and disposal, using the Barnett Shale in Texas as a case study. Data were obtained from commercial and state databases, river authorities, groundwater conservation districts, and operators. Cumulative water use from ∼ 18,000 (mostly horizontal) wells since 1981 through 2012 totaled ∼ 170,000 AF (210 Mm(3)); ∼ 26 000 AF (32 Mm(3)) in 2011, representing 32% of Texas HF water use and ∼ 0.2% of 2011 state water consumption. Increase in water use per well by 60% (from 3 to 5 Mgal/well; 0.011-0.019 Mm(3)) since the mid-2000s reflects the near-doubling of horizontal-well lengths (2000-3800 ft), offset by a reduction in water-use intensity by 40% (2000-1200 gal/ft; 2.5-1.5 m(3)/m). Water sources include fresh surface water and groundwater in approximately equal amounts. Produced water amount is inversely related to gas production, exceeds HF water volume, and is mostly disposed in injection wells. Understanding the historical evolution of water use in the longest-producing shale play is invaluable for assessing its water footprint for energy production.

  5. Cooperative federalism and hydraulic fracturing: a human right to a clean environment.

    Science.gov (United States)

    Burleson, Elizabeth

    2012-01-01

    This Article argues that filling the energy governance gaps regarding unconventional natural gas can best be accomplished through collaborative governance that is genuinely adaptive and cooperative. Through cooperative federalism, combined with procedural rights for inclusive, innovative decision-making, state and non-state actors should design and implement the requisite safeguards before further natural gas development advances. Hydraulic fracturing provisions are strikingly fragmented and have sparked a fierce debate about chemical disclosure, radioactive wastewater disposal, and greenhouse gas emissions. United States natural gas production may stunt the direction and intensity of renewable energy by up to two decades and will not provide a bridge to a sound energy policy if it "erode[s] efforts to prepare a landing at the other end of the bridge." Unconventional natural gas extraction need not become a transition to a new addiction. This Article analyzes how cooperative federalism and inclusive decision-making can provide legitimacy and transparency when balancing property rights against police powers to regulate natural gas production.

  6. Regulatory and Non-regulatory Responses to Hydraulic Fracturing in Local Communities

    Science.gov (United States)

    Phartiyal, P.

    2015-12-01

    The practice of extracting oil and gas from tight rock formations using advances in technology, such as hydraulic fracturing and directional drilling, has expanded exponentially in states and localities across the country. As the scientific data collection and analysis catches up on the many potential impacts of this unconventional oil and gas development, communities are turning to their local officials to make decisions on whether and how fracking should proceed. While most regulatory authority on the issue rests with the state agencies, local officials have experimented with a wide range of regulatory, non-regulatory, and fiscal tools to manage the impacts of fracking. These impacts can occur on the local air, water, seismicity, soil, roads, schools, and affect residents, on-site workers, emergency and social services. Local officials' approaches are often influenced by their prior experience with minerals extraction in their localities. The speaker will present examples of the kinds of information sources, tools and approaches communities across the country are using, from noise barriers to setback requirements to information sharing in order to be able to balance the promise and perils of oil and gas development in their jurisdictions.

  7. New P3D Hydraulic Fracturing Model Based on the Radial Flow

    Institute of Scientific and Technical Information of China (English)

    鲁连军; 孙逢春; 肖海华; 安申法

    2004-01-01

    Pseudo three-dimension (P3D) hydraulic fracturing models often overpredict the fracture height for a poorly contained fracture. To solve this problem, a new method is presented in shaping the P3D fracture geometry on the basis of the fundamental theory and the original 1D fluid flow is replaced with a more representatively radial flow. The distribution of the fluid in the modified fluid field is analyzed and a sound explanation to the problem is given. Due to the consideration of the fluid flow in the vertical direction, the modified model can predict the fracture height much better. To validate the rationality of the radial fluid flow assumption, the distribution of the fluid in the modified fluid field is simulated with the plane potential flow by using finite element method. And the results agree effectively with those from the assumption. Through comparing with the full 3D model, the results show that this new P3D model can be used to aid the fracturing design and predict the fracture height under poorly contained situation.

  8. XFEM modeling of hydraulic fracture in porous rocks with natural fractures

    Science.gov (United States)

    Wang, Tao; Liu, ZhanLi; Zeng, QingLei; Gao, Yue; Zhuang, Zhuo

    2017-08-01

    Hydraulic fracture (HF) in porous rocks is a complex multi-physics coupling process which involves fluid flow, diffusion and solid deformation. In this paper, the extended finite element method (XFEM) coupling with Biot theory is developed to study the HF in permeable rocks with natural fractures (NFs). In the recent XFEM based computational HF models, the fluid flow in fractures and interstitials of the porous media are mostly solved separately, which brings difficulties in dealing with complex fracture morphology. In our new model the fluid flow is solved in a unified framework by considering the fractures as a kind of special porous media and introducing Poiseuille-type flow inside them instead of Darcy-type flow. The most advantage is that it is very convenient to deal with fluid flow inside the complex fracture network, which is important in shale gas extraction. The weak formulation for the new coupled model is derived based on virtual work principle, which includes the XFEM formulation for multiple fractures and fractures intersection in porous media and finite element formulation for the unified fluid flow. Then the plane strain Kristianovic-Geertsma-de Klerk (KGD) model and the fluid flow inside the fracture network are simulated to validate the accuracy and applicability of this method. The numerical results show that large injection rate, low rock permeability and isotropic in-situ stresses tend to lead to a more uniform and productive fracture network.

  9. Potential water resource impacts of hydraulic fracturing from unconventional oil production in the Bakken shale.

    Science.gov (United States)

    Shrestha, Namita; Chilkoor, Govinda; Wilder, Joseph; Gadhamshetty, Venkataramana; Stone, James J

    2017-01-01

    Modern drilling techniques, notably horizontal drilling and hydraulic fracturing, have enabled unconventional oil production (UOP) from the previously inaccessible Bakken Shale Formation located throughout Montana, North Dakota (ND) and the Canadian province of Saskatchewan. The majority of UOP from the Bakken shale occurs in ND, strengthening its oil industry and businesses, job market, and its gross domestic product. However, similar to UOP from other low-permeability shales, UOP from the Bakken shale can result in environmental and human health effects. For example, UOP from the ND Bakken shale generates a voluminous amount of saline wastewater including produced and flowback water that are characterized by unusual levels of total dissolved solids (350 g/L) and elevated levels of toxic and radioactive substances. Currently, 95% of the saline wastewater is piped or trucked onsite prior to disposal into Class II injection wells. Oil and gas wastewater (OGW) spills that occur during transport to injection sites can potentially result in drinking water resource contamination. This study presents a critical review of potential water resource impacts due to deterministic (freshwater withdrawals and produced water management) and probabilistic events (spills due to leaking pipelines and truck accidents) related to UOP from the Bakken shale in ND.

  10. Numerical simulation of hydraulic fracturing and associated microseismicity using finite-discrete element method

    Directory of Open Access Journals (Sweden)

    Qi Zhao

    2014-12-01

    Full Text Available Hydraulic fracturing (HF technique has been extensively used for the exploitation of unconventional oil and gas reservoirs. HF enhances the connectivity of less permeable oil and gas-bearing rock formations by fluid injection, which creates an interconnected fracture network and increases the hydrocarbon production. Meanwhile, microseismic (MS monitoring is one of the most effective approaches to evaluate such stimulation process. In this paper, the combined finite-discrete element method (FDEM is adopted to numerically simulate HF and associated MS. Several post-processing tools, including frequency-magnitude distribution (b-value, fractal dimension (D-value, and seismic events clustering, are utilized to interpret numerical results. A non-parametric clustering algorithm designed specifically for FDEM is used to reduce the mesh dependency and extract more realistic seismic information. Simulation results indicated that at the local scale, the HF process tends to propagate following the rock mass discontinuities; while at the reservoir scale, it tends to develop in the direction parallel to the maximum in-situ stress.

  11. Temporal Trends in Freshwater Withdrawals for Hydraulic Fracturing in the Marcellus Shale

    Science.gov (United States)

    Barth-Naftilan, E.; Saiers, J. E.

    2014-12-01

    Development of the Marcellus Shale, the nation's largest shale gas producing formation, is estimated to use two to seven million gallons of water per well. Because Marcellus Shale wells are located in relatively water-rich areas, there has been less pressure in the region to recycle and reuse freshwater sourced from surface water streams for stimulating new wells. We review trends in actual freshwater withdrawals from surface water streams over time, and examine which regulations are most protective of flows intra- and inter-annually. Pass-by flow protective requirements appear to be most effective when set based on monthly flows, rather than annual flows, though not all regulatory agencies are using this protective mechanism. Total water use by industry in a shale play doesn't appear to follow trends of seasonal availability until three to five years after development begins in that play, and intensity of water use from surface water withdrawal sites appears to decrease over time. Trends in water use can be tied to a number of factors including changing gas prices and demand (number of wells hydraulically fractured), increasing length of laterals, increasing recycling rates, increasing industrial efficiency, and others.

  12. A Holistic Assessment of Energy Production: Environmental, Economic, and Social Impacts of Hydraulic Fracturing in Williams County, North Dakota

    Science.gov (United States)

    Jagdeo, J.; Ravikumar, A. P.; Grubert, E.; Brandt, A. R.

    2016-12-01

    Unconventional oil and natural gas production in the U.S. has increased tenfold between 2005 and 2014 due to advances in hydraulic fracturing technology. Prior studies of hydraulic fracturing activity have mainly focused on two themes: the environmental impacts related to air and water pollution or the direct and spillover economic benefits resulting from oil booms at the state and local level. However, the impacts of hydraulic fracturing extend beyond these effects. Oil-boom counties have experienced environmental changes in land-use and water supply and witnessed social changes in demographics, crime, and health, factors that are not typically evaluated in regard to hydraulic fracturing. Hence, there is a need to consider the holistic effects of oil production on communities. This study examines the environmental, economic, and social impacts of oil and gas activity in Williams County, North Dakota by comparing its pre-boom ( 2005) and post-boom ( 2014) conditions. Annual oil production in Williams County increased from 3.4 million barrels in 2005 to 56 million barrels in 2014, providing an ideal test-case to study the impact of energy development on surrounding communities. We compared changes in multiple impact categories, attributed directly or indirectly to hydraulic fracturing activity, to trends at the national level. For example, between 2005 and 2014, CO2 and CH4 emissions primarily from oil and gas activity increased by 360 thousand metric tons CO2e, corresponding to a 20-fold increase. Concurrently, national emissions decreased by 10.5%. Over twenty indicators were analyzed across environmental, social and economic impact categories, including land-use change, median household income, and crime rates. The datasets were normalized using federal regulations for upper and lower bounds, or calibrated against national averages. Normalized indicators are then aggregated to provide a single-value `impact-factor'. Such `impact-factor' maps will provide a

  13. Permeability Enhancement in Enhanced Geothermal System as a result of Hydraulic Fracturing and Jacking

    Science.gov (United States)

    Jalali, Mohammadreza; Klepikova, Maria; Fisch, Hansruedi; Amann, Florian; Loew, Simon

    2016-04-01

    A decameter-scale in-situ hydraulic stimulation and circulation (ISC) experiment has been initiated by the newly-founded Swiss Competence Centre for Energy Research - Supply of Electricity (SCCER-SoE) at Nagra's Grimsel Test Site (GTS) as a part of the work-package WP1 of the Deep Underground Laboratory (DUG-Lab) initiative. The experiment area is situated in the southern part of the GTS in a low fracture density volume of the Grimsel granodiorite. The hydraulic properties of the granitic rock mass are supposed to be similar to those expected in the crystalline basement of the alpine foreland where deep enhanced geothermal systems might be developed in future. The main objectives of the multi-disciplinary experiment are to provide a high resolution pre- and post-stimulation characterization of fracture permeability and connectivity, to investigate patterns of preferential flow paths, to describe the pressure propagation during the stimulation phases and to evaluate the efficiency of the fracture-matrix heat exchanger. A comprehensive test & monitoring layout including a fair number of boreholes instrumented with a variety of sensors (e.g. pressure, strain, displacement, temperature, and seismic sensors) is designed to collect detailed data during multiple hydraulic stimulation runs. The diffusion of fluid pressure is expected to be governed mainly by the properties and geometry of the existent fracture network. The hydraulic transmissivity of fractures are in the range of 10-7 to 10-9 m2/s whereas the matrix rock has a very low hydraulic conductivity (K ˜ 10-12 m/s). As part of the stress measurement campaign during the pre-stimulation phase of the ISC experiment, a series of hydraulic fracturing (HF) and hydraulic tests in pre-existing fractures (HTPF) were conducted. The tests were accompanied by micro-seismic monitoring within several observation boreholes to investigate the initiation and propagation of the induced fractures. Together with results from over

  14. Fluid driven fracture mechanics in highly anisotropic shale: a laboratory study with application to hydraulic fracturing

    Science.gov (United States)

    Gehne, Stephan; Benson, Philip; Koor, Nick; Enfield, Mark

    2017-04-01

    The finding of considerable volumes of hydrocarbon resources within tight sedimentary rock formations in the UK led to focused attention on the fundamental fracture properties of low permeability rock types and hydraulic fracturing. Despite much research in these fields, there remains a scarcity of available experimental data concerning the fracture mechanics of fluid driven fracturing and the fracture properties of anisotropic, low permeability rock types. In this study, hydraulic fracturing is simulated in a controlled laboratory environment to track fracture nucleation (location) and propagation (velocity) in space and time and assess how environmental factors and rock properties influence the fracture process and the developing fracture network. Here we report data on employing fluid overpressure to generate a permeable network of micro tensile fractures in a highly anisotropic shale ( 50% P-wave velocity anisotropy). Experiments are carried out in a triaxial deformation apparatus using cylindrical samples. The bedding planes are orientated either parallel or normal to the major principal stress direction (σ1). A newly developed technique, using a steel guide arrangement to direct pressurised fluid into a sealed section of an axially drilled conduit, allows the pore fluid to contact the rock directly and to initiate tensile fractures from the pre-defined zone inside the sample. Acoustic Emission location is used to record and map the nucleation and development of the micro-fracture network. Indirect tensile strength measurements at atmospheric pressure show a high tensile strength anisotropy ( 60%) of the shale. Depending on the relative bedding orientation within the stress field, we find that fluid induced fractures in the sample propagate in two of the three principal fracture orientations: Divider and Short-Transverse. The fracture progresses parallel to the bedding plane (Short-Transverse orientation) if the bedding plane is aligned (parallel) with the

  15. Investigating the traffic-related environmental impacts of hydraulic-fracturing (fracking) operations.

    Science.gov (United States)

    Goodman, Paul S; Galatioto, Fabio; Thorpe, Neil; Namdeo, Anil K; Davies, Richard J; Bird, Roger N

    2016-01-01

    Hydraulic fracturing (fracking) has been used extensively in the US and Canada since the 1950s and offers the potential for significant new sources of oil and gas supply. Numerous other countries around the world (including the UK, Germany, China, South Africa, Australia and Argentina) are now giving serious consideration to sanctioning the technique to provide additional security over the future supply of domestic energy. However, relatively high population densities in many countries and the potential negative environmental impacts that may be associated with fracking operations has stimulated controversy and significant public debate regarding if and where fracking should be permitted. Road traffic generated by fracking operations is one possible source of environmental impact whose significance has, until now, been largely neglected in the available literature. This paper therefore presents a scoping-level environmental assessment for individual and groups of fracking sites using a newly-created Traffic Impacts Model (TIM). The model produces estimates of the traffic-related impacts of fracking on greenhouse gas emissions, local air quality emissions, noise and road pavement wear, using a range of hypothetical fracking scenarios to quantify changes in impacts against baseline levels. Results suggest that the local impacts of a single well pad may be short duration but large magnitude. That is, whilst single digit percentile increases in emissions of CO2, NOx and PM are estimated for the period from start of construction to pad completion (potentially several months or years), excess emissions of NOx on individual days of peak activity can reach 30% over baseline. Likewise, excess noise emissions appear negligible (fracking water and flowback waste requirements. The TIM model is designed to be adaptable to any geographic area where the required input data are available (such as fleet characteristics, road type and quality), and we suggest could be deployed as a

  16. Modeling Atmospheric Emissions and Calculating Mortality Rates Associated with High Volume Hydraulic Fracturing Transportation

    Science.gov (United States)

    Mathews, Alyssa

    Emissions from the combustion of fossil fuels are a growing pollution concern throughout the global community, as they have been linked to numerous health issues. The freight transportation sector is a large source of these emissions and is expected to continue growing as globalization persists. Within the US, the expanding development of the natural gas industry is helping to support many industries and leading to increased transportation. The process of High Volume Hydraulic Fracturing (HVHF) is one of the newer advanced extraction techniques that is increasing natural gas and oil reserves dramatically within the US, however the technique is very resource intensive. HVHF requires large volumes of water and sand per well, which is primarily transported by trucks in rural areas. Trucks are also used to transport waste away from HVHF well sites. This study focused on the emissions generated from the transportation of HVHF materials to remote well sites, dispersion, and subsequent health impacts. The Geospatial Intermodal Freight Transport (GIFT) model was used in this analysis within ArcGIS to identify roadways with high volume traffic and emissions. High traffic road segments were used as emissions sources to determine the atmospheric dispersion of particulate matter using AERMOD, an EPA model that calculates geographic dispersion and concentrations of pollutants. Output from AERMOD was overlaid with census data to determine which communities may be impacted by increased emissions from HVHF transport. The anticipated number of mortalities within the impacted communities was calculated, and mortality rates from these additional emissions were computed to be 1 in 10 million people for a simulated truck fleet meeting stricter 2007 emission standards, representing a best case scenario. Mortality rates due to increased truck emissions from average, in-use vehicles, which represent a mixed age truck fleet, are expected to be higher (1 death per 341,000 people annually).

  17. Environmentally Friendly, Rheoreversible, Hydraulic-fracturing Fluids for Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Hongbo; Kabilan, Senthil; Stephens, Sean A.; Suresh, Niraj; Beck, Anthon NR; Varga, Tamas; Martin, Paul F.; Kuprat, Andrew P.; Jung, Hun Bok; Um, Wooyong; Bonneville, Alain; Heldebrant, David J.; Carroll, KC; Moore, Joseph; Fernandez, Carlos A.

    2015-07-01

    Cost-effective creation of high-permeability reservoirs inside deep crystalline bedrock is the primary challenge for the feasibility of enhanced geothermal systems (EGS). Current reservoir stimulation entails adverse environmental impacts and substantial economic costs due to the utilization of large volumes of water “doped” with chemicals including rheology modifiers, scale and corrosion inhibitors, biocides, friction reducers among others where, typically, little or no information of composition and toxicity is disclosed. An environmentally benign, CO2-activated, rheoreversible fracturing fluid has recently been developed that significantly enhances rock permeability at effective stress significantly lower than current technology. We evaluate the potential of this novel fracturing fluid for application on geothermal sites under different chemical and geomechanical conditions, by performing laboratory-scale fracturing experiments with different rock sources under different confining pressures, temperatures, and pH environments. The results demonstrate that CO2-reactive aqueous solutions of environmentally amenable Polyallylamine (PAA) represent a highly versatile fracturing fluid technology. This fracturing fluid creates/propagates fracture networks through highly impermeable crystalline rock at significantly lower effective stress as compared to control experiments where no PAA was present, and permeability enhancement was significantly increased for PAA compared to conventional hydraulic fracturing controls. This was evident in all experiments, including variable rock source/type, operation pressure and temperature (over the entire range for EGS applications), as well as over a wide range of formation-water pH values. This versatile novel fracturing fluid technology represents a great alternative to industrially available fracturing fluids for cost-effective and competitive geothermal energy production.

  18. Comparison of Heterogeneously-Propped Hydraulic Fractures for Vertical and Lateral Wells

    Science.gov (United States)

    Morris, J.; Chugunov, N.

    2014-12-01

    Heterogeneous proppant placement (HPP) technologies offer improved hydraulic fracturing performance through the creation of channels within propped fractures (see figure). Such schemes, however, can suffer from reduced performance due to uncertainty in reservoir properties (e.g.: embedment and moduli). This is particularly true of unconventional reservoirs where properties can be highly heterogeneous. We demonstrate that the mechanisms controlling uncertainty in HPP performance differ between vertical and lateral wells. For computational efficiency, we combine the boundary element method to simulate formation deformation with a detailed discretization of the proppant within the fracture to predict conductivity of the HPP channels. We performed an extensive parameter study with thousands of scenarios relevant to HPP, including placement geometries consistent with both vertical and lateral wells. Global sensitivity analysis (GSA) was then applied to quantify and rank contributions from uncertain input parameters to variance in fracture conductivity. We were able to rigorously quantify the impact of parametric uncertainty. We found that for lateral wells the uncertainty in the conductivity is dominated by the uncertainty in diffusion of the proppant. For vertical wells, the dominant factors causing uncertainty in the performance change with stress. At low stress, performance is controlled by factors that dictate pillar geometry. At high stress, parameters that help preserve channels against closure stress control conductivity. Our results highlight the robustness of the HPP concept and quantify the sources of uncertainty in HPP performance. Further, we can clearly identify the fundamental parameters that control HPP conductivity and reveal that they are different for wellbore geometries that are typical of unconventional wells in North America. This implies that optimal HPP strategies will differ between vertical and lateral wells.

  19. Addressing the challenges of GRACE application in basins with hydraulic fracturing activity

    Science.gov (United States)

    Read, L.; Ruybal, C.; Hogue, T. S.; Hinojosa, M. P.

    2016-12-01

    Despite the growing number of studies that employ GRACE to quantify groundwater resources we have found no published studies on whether GRACE is also accounting for subsurface mass redistributions related to energy development activities from oil production, water production, and wastewater injection. Given the similar densities of water and crude oil (water is 1.0g/cc, crude oil is 0.8-0.9g/cc) and the fact that large volumes of oil and water are extracted on a monthly basis for hydraulic fracturing or reinjected as a means of waste disposal, it is important to determine whether GRACE is detecting mass redistributions from energy development to be able to correctly infer changes in water mass. The purpose of this study is to investigate whether GRACE measurements are impacted by energy development activities and offer a methodology for determining whether this activity should be considered when evaluating changes in terrestrial water storage, groundwater storage, or any other prediction involving quantification of groundwater. To address this question we compiled a dataset from the Bakken Play in North Dakota to use as a case study, where oil production was significant and increased exponentially from 2002-2015, and groundwater withdrawals for agriculture were relatively stable and limited. Preliminary results indicate that oil and gas production is of a similar scale and thus important to include when calculating groundwater changes. Broadly, this research addresses the challenges and uncertainties in applying GRACE to quantify groundwater or terrestrial water changes in energy-active basins, namely in accounting for oil reservoir changes, production, and injection rates, as well as the process of data collection in proprietary systems.

  20. Will water scarcity in semiarid regions limit hydraulic fracturing of shale plays?

    Science.gov (United States)

    Scanlon, Bridget R.; Reedy, Robert C.; Nicot, Jean Philippe

    2014-12-01

    There is increasing concern about water constraints limiting oil and gas production using hydraulic fracturing (HF) in shale plays, particularly in semiarid regions and during droughts. Here we evaluate HF vulnerability by comparing HF water demand with supply in the semiarid Texas Eagle Ford play, the largest shale oil producer globally. Current HF water demand (18 billion gallons, bgal; 68 billion liters, bL in 2013) equates to ˜16% of total water consumption in the play area. Projected HF water demand of ˜330 bgal with ˜62 000 additional wells over the next 20 years equates to ˜10% of historic groundwater depletion from regional irrigation. Estimated potential freshwater supplies include ˜1000 bgal over 20 yr from recharge and ˜10 000 bgal from aquifer storage, with land-owner lease agreements often stipulating purchase of freshwater. However, pumpage has resulted in excessive drawdown locally with estimated declines of ˜100-200 ft in ˜6% of the western play area since HF began in 2009-2013. Non-freshwater sources include initial flowback water, which is ≤5% of HF water demand, limiting reuse/recycling. Operators report shifting to brackish groundwater with estimated groundwater storage of 80 000 bgal. Comparison with other semiarid plays indicates increasing brackish groundwater and produced water use in the Permian Basin and large surface water inputs from the Missouri River in the Bakken play. The variety of water sources in semiarid regions, with projected HF water demand representing ˜3% of fresh and ˜1% of brackish water storage in the Eagle Ford footprint indicates that, with appropriate management, water availability should not physically limit future shale energy production.

  1. In-situ stress measurements and stress change monitoring to monitor overburden caving behaviour and hydraulic fracture pre-conditioning

    Institute of Scientific and Technical Information of China (English)

    Puller Jesse W.; Mills Ken W.; Jeffrey Rob G.; Walker Rick J.

    2016-01-01

    A coal mine in New South Wales is longwall mining 300 m wide panels at a depth of 160–180 m directly below a 16–20 m thick conglomerate strata. As part of a strategy to use hydraulic fracturing to manage potential windblast and periodic caving hazards associated with these conglomerate strata, the in-situ stresses in the conglomerate were measured using ANZI strain cells and the overcoring method of stress relief. Changes in stress associated with abutment loading and placement of hydraulic fractures were also measured using ANZI strain cells installed from the surface and from underground. Overcore stress mea-surements have indicated that the vertical stress is the lowest principal stress so that hydraulic fractures placed ahead of mining form horizontally and so provide effective pre-conditioning to promote caving of the conglomerate strata. Monitoring of stress changes in the overburden strata during longwall retreat was undertaken at two different locations at the mine. The monitoring indicated stress changes were evi-dent 150 m ahead of the longwall face and abutment loading reached a maximum increase of about 7.5 MPa. The stresses ahead of mining change gradually with distance to the approaching longwall and in a direction consistent with the horizontal in-situ stresses. There was no evidence in the stress change monitoring results to indicate significant cyclical forward abutment loading ahead of the face. The for-ward abutment load determined from the stress change monitoring is consistent with the weight of over-burden strata overhanging the goaf indicated by subsidence monitoring.

  2. Air monitoring of volatile organic compounds at relevant receptors during hydraulic fracturing operations in Washington County, Pennsylvania.

    Science.gov (United States)

    Maskrey, Joshua R; Insley, Allison L; Hynds, Erin S; Panko, Julie M

    2016-07-01

    A 3-month air monitoring study was conducted in Washington County, Pennsylvania, at the request of local community members regarding the potential risks resulting from air emissions of pollutants related to hydraulic fracturing operations. Continuous air monitoring for total volatile organic compounds was performed at two sampling sites, including a school and a residence, located within 900 m of a hydraulic fracturing well pad that had been drilled prior to the study. Intermittent 24-hour air samples for 62 individual volatile organic compounds were also collected. The ambient air at both sites was monitored during four distinct periods of unconventional natural gas extraction activity: an inactive period prior to fracturing operations, during fracturing operations, during flaring operations, and during another inactive period after operations. The results of the continuous monitoring during fracturing and flaring sampling periods for total volatile organic compounds were similar to the results obtained during inactive periods. Total volatile organic compound 24-hour average concentrations ranged between 0.16 and 80 ppb during all sampling periods. Several individual volatile compounds were detected in the 24-hour samples, but they were consistent with background atmospheric levels measured previously at nearby sampling sites and in other areas in Washington County. Furthermore, a basic yet conservative screening level evaluation demonstrated that the detected volatile organic compounds were well below health-protective levels. The primary finding of this study was that the operation of a hydraulic fracturing well pad in Washington County did not substantially affect local air concentrations of total and individual volatile organic compounds.

  3. 4D synchrotron X-ray imaging to understand porosity development in shales during exposure to hydraulic fracturing fluid

    Science.gov (United States)

    Kiss, A. M.; Bargar, J.; Kohli, A. H.; Harrison, A. L.; Jew, A. D.; Lim, J. H.; Liu, Y.; Maher, K.; Zoback, M. D.; Brown, G. E.

    2016-12-01

    Unconventional (shale) reservoirs have emerged as the most important source of petroleum resources in the United States and represent a two-fold decrease in greenhouse gas emissions compared to coal. Despite recent progress, hydraulic fracturing operations present substantial technical, economic, and environmental challenges, including inefficient recovery, wastewater production and disposal, contaminant and greenhouse gas pollution, and induced seismicity. A relatively unexplored facet of hydraulic fracturing operations is the fluid-rock interface, where hydraulic fracturing fluid (HFF) contacts shale along faults and fractures. Widely used, water-based fracturing fluids contain oxidants and acid, which react strongly with shale minerals. Consequently, fluid injection and soaking induces a host of fluid-rock interactions, most notably the dissolution of carbonates and sulfides, producing enhanced or "secondary" porosity networks, as well as mineral precipitation. The competition between these mechanisms determines how HFF affects reactive surface area and permeability of the shale matrix. The resultant microstructural and chemical changes may also create capillary barriers that can trap hydrocarbons and water. A mechanistic understanding of the microstructure and chemistry of the shale-HFF interface is needed to design new methodologies and fracturing fluids. Shales were imaged using synchrotron micro-X-ray computed tomography before, during, and after exposure to HFF to characterize changes to the initial 3D structure. CT reconstructions reveal how the secondary porosity networks advance into the shale matrix. Shale samples span a range of lithologies from siliceous to calcareous to organic-rich. By testing shales of different lithologies, we have obtained insights into the mineralogic controls on secondary pore network development and the morphologies at the shale-HFF interface and the ultimate composition of produced water from different facies. These results

  4. 致密灰岩储层压裂裂缝扩展形态试验研究%Experimental investigation on propagation geometry of hydraulic fracture in compact limestone reservoirs

    Institute of Scientific and Technical Information of China (English)

    侯冰; 谭鹏; 陈勉; 袁亮; 熊振宇; 许超兰

    2016-01-01

    Large-scale hydraulic fracturing technology is significant in the development of compact limestone reservoirs with low porosity and low permeability. The diagenesis, mineral composition and mechanical properties of the compact limestone reservoirs are greatly different from those of the compact sandstone ones. Hydraulic fracture geometry is complicated under different stress states and construction conditions. Based on the hydraulic fracturing simulation experiments on compact limestone outcrops carried out by using a true triaxial test system, the effects of multiple factors on fracture propagating laws of horizontal well in compact limestone are studied. The results show that hydraulic fractures likely interact with natural ones when the horizontal stress difference ranges from 2 to 8 MPa. A higher fracturing fluid viscosity reduces the possibility of shearing slip and filtration expansion of the natural fractures, forming a relatively less complex fracture network. Under the strike-slip fault stress state (HVhσ>σ>σ), the horizontal hydraulic fracture can be easily generated and propagates along the bedding plane, especially when the direction of borehole is parallel to the bedding plane. The fracturing with variable pump rates can reactivate more natural fractures, forming a more complicated fracture network. Acidizing treatment for openhole section can significantly reduce the fracture pressure, and the decrease range of fracture pressure gradually increases with the increase of acidizing treatment time. This study may provide a reference for field fracturing treatment.%开发低孔、低渗的致密灰岩储层需要进行大规模的水力压裂。致密灰岩的成岩过程、矿物组成以及岩石力学性质与致密砂岩等储层差异很大,在不同应力状态以及施工参数条件下水力裂缝扩展形态有待研究。采用真三轴水力压裂试验系统对致密灰岩露头展开压裂物模试验,研究地应力差、压裂液黏

  5. Biocides in hydraulic fracturing: hazard and vulnerability with respect to potential groundwater pollution

    Science.gov (United States)

    Worrall, Fred; Wilson, Miles; Davies, Richard

    2016-04-01

    Biocides are one possible chemical additive to frack fluids and their role is to control bacterial growth. Bacterial growth might lead to biofilm build up; and acid sulfide species and hydrogen sulfide (H2S) production: biofilm build up may reduce formation permeability and hinder gas extraction. Kahrilas et al. (2014) published a review of common biocides used in fracking in the USA. The biocides assessed in the review were the sixteen most commonly used in the USA, based on the hydraulic fracturing chemical registry Frac Focus (Frac Focus, 2015). However, the review of Kahrilas et al. (2014) contained no data or observations and so the objective of this study was to consider whether biocides proposed for use in hydrofacturing could be a threat to English groundwater. The study considered all groundwater samples analysed for biocides in English groundwater between 2005 and 2014. The monitoring records were compared to: records of application (both amount and area); and chemical and molecular data for the biocides. The study did not use traditional adsorption and degradation data as these parameters are to prone to variability and are not pure molecular parameters. The study then used the approach of Worrall and Thomsen (2004) to consider the hazard represented by proposed frack biocides and the approach of Worrall and Kolpin (2003) to consider the vulnerability of the areas of potential shale gas exploitation. The study showed that of the 113 biocides tested for in English groundwaters in the decade 2005 - 2014 that 95 were detected above 0.1 g/l . Of these 95, 41 were compounds that were not recorded as being applied during the period of record and the detection of these 41 compounds did not decline over the 10 year period which implies very long residence times and that once compounds do pollute an aquifer then they will be a persistent problem. Furthermore, the solubility of the range of biocides used in frack fluids would imply a potentially higher hazard

  6. Contesting Technologies in the Networked Society: A Case Study of Hydraulic Fracturing and Shale Development

    Science.gov (United States)

    Hopke, Jill E.

    In this dissertation, I study the network structure and content of a transnational movement against hydraulic fracturing and shale development, Global Frackdown. I apply a relational perspective to the study of role of digital technologies in transnational political organizing. I examine the structure of the social movement through analysis of hyperlinking patterns and qualitative analysis of the content of the ties in one strand of the movement. I explicate three actor types: coordinator, broker, and hyper-local. This research intervenes in the paradigm that considers international actors as the key nodes to understanding transnational advocacy networks. I argue this focus on the international scale obscures the role of globally minded local groups in mediating global issues back to the hyper-local scale. While international NGOs play a coordinating role, local groups with a global worldview can connect transnational movements to the hyper-local scale by networking with groups that are too small to appear in a transnational network. I also examine the movement's messaging on the social media platform Twitter. Findings show that Global Frackdown tweeters engage in framing practices of: movement convergence and solidarity, declarative and targeted engagement, prefabricated messaging, and multilingual tweeting. The episodic, loosely-coordinated and often personalized, transnational framing practices of Global Frackdown tweeters support core organizers' goal of promoting the globalness of activism to ban fracking. Global Frackdown activists use Twitter as a tool to advance the movement and to bolster its moral authority, as well as to forge linkages between localized groups on a transnational scale. Lastly, I study the relative prominence of negative messaging about shale development in relation to pro-shale messaging on Twitter across five hashtags (#fracking, #globalfrackdown, #natgas, #shale, and #shalegas). I analyze the top actors tweeting using the #fracking

  7. 油气藏水力压裂计算模拟技术研究现状与展望%CURRENT STATUS AND PROSPECT OF COMPUTER SIMULATION TECHNIQUES OF HYDRAULIC FRACTURING IN OIL AND GAS FIELD

    Institute of Scientific and Technical Information of China (English)

    张搏; 李晓; 王宇; 武艳芳; 李关访

    2015-01-01

    -based numerical methods).Finally,the limitation of current study and the further studies needed are put forward,from the following three aspects.(1 )Improvement of the fully 3D model. The combination of fully 3D model,treatment parameter and monitoring data can calibrate the model itself.The calibrated model can well predict and optimize the real hydraulic fracturing operation.(2 )Selection of numerical methods.There are many methods for hydraulic fracturing.The methods should be comprehensively compared and optimized,in order to verify their applicable scope,computional efficiency and simulation effect.(3 )Numerical simulation of the reservoir with natural fracture network.Natural fracture network increases the anisotropy of rock mechanical property.The interaction between natural further and hydraulic fracture benefits the reservoir stimulation,plays an important role in the geometry,dimension and connectivity rate of hydraulic fracture network. The simulation of the reservoir with natural fracture network will be the hotspot in future study.

  8. Estimation of the fluid excess pressure of hydraulic fractures in paleo geothermal reservoirs; Abschaetzung des Fluidueberdrucks von hydraulischen Bruechen in palaeogeothermischen Reservoiren

    Energy Technology Data Exchange (ETDEWEB)

    Philipp, Sonja L. [Goettingen Univ. (Germany). Geowissenschaftliches Zentrum

    2011-10-24

    In many geothermal reservoirs to low natural permeabilities have to be enhanced by opening or shearing the existing fractures or by generating artificial hydraulic fractures (reservoir stimulation). Such hydraulic fractures can also occur naturally and will remain in paleo geothermal reservoirs. Using the example of calcite passages in a Jurassic limestone-marl alternations in southwest England the author of the contribution under consideration shows that the fault zones (mainly normal faults) were used as fluid transport pathways for calcium carbonate containing water which was injected as hydraulic fractures in the host rock. Overall, in consensus with isotopic studies it was shown that geothermal waters with relatively local origin were within the sedimentary basin and did not come from great depths. The pore fluid pressure within the limestone beds is not sufficient as a reason for the formation of calcite passages.

  9. The functional potential of microbial communities in hydraulic fracturing source water and produced water from natural gas extraction characterized by metagenomic sequencing.

    Science.gov (United States)

    Mohan, Arvind Murali; Bibby, Kyle J; Lipus, Daniel; Hammack, Richard W; Gregory, Kelvin B

    2014-01-01

    Microbial activity in produced water from hydraulic fracturing operations can lead to undesired environmental impacts and increase gas production costs. However, the metabolic profile of these microbial communities is not well understood. Here, for the first time, we present results from a shotgun metagenome of microbial communities in both hydraulic fracturing source water and wastewater produced by hydraulic fracturing. Taxonomic analyses showed an increase in anaerobic/facultative anaerobic classes related to Clostridia, Gammaproteobacteria, Bacteroidia and Epsilonproteobacteria in produced water as compared to predominantly aerobic Alphaproteobacteria in the fracturing source water. The metabolic profile revealed a relative increase in genes responsible for carbohydrate metabolism, respiration, sporulation and dormancy, iron acquisition and metabolism, stress response and sulfur metabolism in the produced water samples. These results suggest that microbial communities in produced water have an increased genetic ability to handle stress, which has significant implications for produced water management, such as disinfection.

  10. Sublethal and Reproductive Effects of Acute and Chronic Exposure to Flowback and Produced Water from Hydraulic Fracturing on the Water Flea Daphnia magna.

    Science.gov (United States)

    Blewett, Tamzin A; Delompré, Perrine L M; He, Yuhe; Folkerts, Erik J; Flynn, Shannon L; Alessi, Daniel S; Goss, Greg G

    2017-02-13

    Hydraulic fracturing is an industrial process allowing for the extraction of gas or oil. To fracture the rocks, a proprietary mix of chemicals is injected under high pressure, which later returns to the surface as flowback and produced water (FPW). FPW is a complex chemical mixture consisting of trace metals, organic compounds, and often, high levels of salts. FPW toxicity to the model freshwater crustacean Daphnia magna was characterized utilizing acute (48 h median lethal concentrations; LC50) and chronic (21 day) exposures. A decrease in reproduction was observed, with a mean value of 18.5 neonates produced per replicate over a 21 day chronic exposure to 0.04% FPW, which was a significant decrease from the average of 64 neonates produced in the controls. The time to first brood was delayed in the highest FPW (0.04%) treatment. Neonates exhibited an LC50 of 0.19% of full-strength FPW, making them more sensitive than adults, which displayed an LC50 value of 0.75%. Quantitative PCR highlighted significant changes in expression of genes encoding xenobiotic metabolism (cyp4) and moulting (cut). This study is the first to characterize chronic FPW toxicity and will help with the development of environmental monitoring and risk assessment of FPW spills.

  11. Numerical Model of Hydraulic Fracturing Fluid Transport in the Subsurface with Pressure Transient, Density Effects, and Imbibition

    Science.gov (United States)

    Birdsell, D.; Rajaram, H.; Dempsey, D.; Viswanathan, H.

    2014-12-01

    Understanding the transport of hydraulic fracturing (HF) fluid that is injected into the deep subsurface for shale gas extraction is important to ensure that shallow drinking water aquifers are not contaminated from an environmental and public health perspective and to understand formation damage from an oil and gas production perspective. Upward pressure gradients, permeable pathways such as faults or improperly abandoned wellbores, and the density contrast of the HF fluid to the surrounding brine encourages upward HF fluid migration. In contrast, the very low shale permeability and the imbibition of water into partially-saturated shale may sequester much of the HF fluid. Using the Finite Element Heat and Mass Transfer Code (FEHM), single-phase flow and transport simulations are performed to quantify how much HF fluid is removed via the wellbore as flowback and produced water and how much reaches overlying aquifers; imbibition is calculated with a semi-analytical one-dimensional solution and treated as a sink term. The travel time for HF fluid to reach the shallow aquifers is highly dependent on the amount of water imbibed and the suction applied to the well. If imbibition rates and suction are small, the pressure transient due to injection and the density contrast allows rapid upward plume migration at early times. The density contrast diminishes considerably within tens to hundreds of years as mixing occurs. We present estimates of HF fluid migration to shallow aquifers during the first 1,000 years after hydraulic fracturing begins for ranges of subsurface properties.

  12. Adsorption of hydraulic fracturing fluid components 2-butoxyethanol and furfural onto granular activated carbon and shale rock.

    Science.gov (United States)

    Manz, Katherine E; Haerr, Gregory; Lucchesi, Jessica; Carter, Kimberly E

    2016-12-01

    The objective of this study was to understand the adsorption ability of a surfactant and a non-surfactant chemical additive used in hydraulic fracturing onto shale and GAC. Experiments were performed at varying temperatures and sodium chloride concentrations to establish these impacts on the adsorption of the furfural (a non-surfactant) and 2-Butoxyethanol (2-BE) (a surfactant). Experiments were carried out in continuously mixed batch experiments with Langmuir and Freundlich isotherm modeling. The results of the experiments showed that adsorption of these compounds onto shale does not occur, which may allow these compounds to return to the surface in flowback and produced waters. The adsorption potential for these chemicals onto GAC follows the assumptions of the Langmuir model more strongly than those of the Freundlich model. The results show uptake of furfural and 2-BE occurs within 23 h in the presence of DI water, 0.1 mol L(-1) sodium chloride, and in lab synthesized hydraulic fracturing brine. Based on the data, 83% of the furfural and 62% of the 2-BE was adsorbed using GAC.

  13. Numerical Evaluation and Optimization of Multiple Hydraulically Fractured Parameters Using a Flow-Stress-Damage Coupled Approach

    Directory of Open Access Journals (Sweden)

    Yu Wang

    2016-04-01

    Full Text Available Multiple-factor analysis and optimization play a critical role in the the ability to maximizethe stimulated reservoir volume (SRV and the success of economic shale gas production. In this paper, taking the typical continental naturally fractured silty laminae shale in China as anexample, response surface methodology (RSM was employed to optimize multiple hydraulic fracturing parameters to maximize the stimulated area in combination with numerical modeling based on the coupled flow-stress-damage (FSD approach. This paper demonstrates hydraulic fracturing effectiveness by defining two indicesnamelythe stimulated reservoir area (SRA and stimulated silty laminae area (SLA. Seven uncertain parameters, such as laminae thickness, spacing, dip angle, cohesion, internal friction angle (IFA, in situ stress difference (SD, and an operational parameter-injection rate (IR with a reasonable range based on silty Laminae Shale, Southeastern Ordos Basin, are used to fit a response of SRA and SLA as the objective function, and finally identity the optimum design under the parameters based on simultaneously maximizingSRA and SLA. In addition, asensitivity analysis of the influential factors is conducted for SRA and SLA. The aim of the study is to improve the artificial ability to control the fracturing network by means of multi-parameteroptimization. This work promises to provide insights into the effective exploitation of unconventional shale gas reservoirs via optimization of the fracturing design for continental shale, Southeastern Ordos Basin, China.

  14. Development of a data-driven forecasting tool for hydraulically fractured, horizontal wells in tight-gas sands

    Science.gov (United States)

    Kulga, B.; Artun, E.; Ertekin, T.

    2017-06-01

    Tight-gas sand reservoirs are considered to be one of the major unconventional resources. Due to the strong heterogeneity and very low permeability of the formation, and the complexity of well trajectories with multiple hydraulic fractures; there are challenges associated with performance forecasting and optimum exploitation of these resources using conventional modeling approaches. In this study, it is aimed to develop a data-driven forecasting tool for tight-gas sands, which are based on artificial neural networks that can complement the physics-driven modeling approach, namely numerical-simulation models. The tool is designed to predict the horizontal-well performance as a proxy to the numerical model, once the initial conditions, operational parameters, reservoir/hydraulic-fracture characteristics are provided. The data-driven model, that the forecasting tool is based on, is validated with blind cases by estimating the cumulative gas production after 10 years with an average error of 3.2%. A graphical-user-interface application is developed that allows the practicing engineer to use the developed tool in a practical manner by visualizing estimated performance for a given reservoir within a fraction of a second. Practicality of the tool is demonstrated with a case study for the Williams Fork Formation by assessing the performance of various well designs and by incorporating known uncertainties through Monte Carlo simulation. P10, P50 and P90 estimates of the horizontal-well performance are quickly obtained within acceptable accuracy levels.

  15. GHGfrack: An Open-Source Model for Estimating Greenhouse Gas Emissions from Combustion of Fuel during Drilling and Hydraulic Fracturing.

    Science.gov (United States)

    Vafi, Kourosh; Brandt, Adam

    2016-07-19

    This paper introduces GHGfrack, an open-source engineering-based model that estimates energy consumption and associated GHG emissions from drilling and hydraulic fracturing operations. We describe verification and calibration of GHGfrack against field data for energy and fuel consumption. We run GHGfrack using data from 6927 wells in Eagle Ford and 4431 wells in Bakken oil fields. The average estimated energy consumption in Eagle Ford wells using lateral hole diameters of 8 (3)/4 and 6 (1)/8 in. are 2.25 and 2.73 TJ/well, respectively. The average estimated energy consumption in Bakken wells using hole diameters of 6 in. for horizontal section is 2.16 TJ/well. We estimate average greenhouse gas (GHG) emissions of 419 and 510 tonne of equivalent CO2 per well (tonne of CO2 eq/well) for the two aforementioned assumed geometries in Eagle Ford, respectively, and 417 tonne of CO2 eq/well for the case of Bakken. These estimates are limited only to GHG emissions from combustion of diesel fuel to supply energy only for rotation of drill string, drilling mud circulation, and fracturing pumps. Sensitivity analysis of the model shows that the top three key variables in driving energy intensity in drilling are the lateral hole diameter, drill pipe internal diameter, and mud flow rate. In hydraulic fracturing, the top three are lateral casing diameter, fracturing fluid volume, and length of the lateral.

  16. Spatial and temporal correlation of water quality parameters of produced waters from devonian-age shale following hydraulic fracturing.

    Science.gov (United States)

    Barbot, Elise; Vidic, Natasa S; Gregory, Kelvin B; Vidic, Radisav D

    2013-03-19

    The exponential increase in fossil energy production from Devonian-age shale in the Northeastern United States has highlighted the management challenges for produced waters from hydraulically fractured wells. Confounding these challenges is a scant availability of critical water quality parameters for this wastewater. Chemical analyses of 160 flowback and produced water samples collected from hydraulically fractured Marcellus Shale gas wells in Pennsylvania were correlated with spatial and temporal information to reveal underlying trends. Chloride was used as a reference for the comparison as its concentration varies with time of contact with the shale. Most major cations (i.e., Ca, Mg, Sr) were well-correlated with chloride concentration while barium exhibited strong influence of geographic location (i.e., higher levels in the northeast than in southwest). Comparisons against brines from adjacent formations provide insight into the origin of salinity in produced waters from Marcellus Shale. Major cations exhibited variations that cannot be explained by simple dilution of existing formation brine with the fracturing fluid, especially during the early flowback water production when the composition of the fracturing fluid and solid-liquid interactions influence the quality of the produced water. Water quality analysis in this study may help guide water management strategies for development of unconventional gas resources.

  17. Hydraulic Fracturing At Sedimentary Basin Scale Fracturation hydraulique à l'échelle des bassins sédimentaires

    Directory of Open Access Journals (Sweden)

    Schneider F.

    2006-12-01

    Full Text Available One key point for simulating the hydraulic fracturing at basin scale, is to be able to compute the stress tensor. This is generally not addressed in basin model because of the complexity of this problem. In order to get access to the stress tensor we have to assume that:- one of the principal stress is vertical and equals the overburden weight;- the horizontal stress is deduced from the vertical stress with the K0 coefficient that is a function of depth and of the tectonical setting. Consolidation is considered here as the combined effect of the mechanical compaction and the chemical compaction. The mechanical compaction is mainly caused by the rearrangement of grains during burial and could be represented at the macroscopical scale by an elastoplastic rheology. The chemical compaction is considered here as resulting from dissolution-precipitation mechanisms, generally induced by stress (pressure-solution. The chemical compaction could be represented at the macroscopical scale by a viscoplastic rheology. The complete elastoplastic yield is defined by the union of the consolidation elastoplastic yield and of the different failure criteria that could be seen as elastobrittle yields. Thus, the elastoplastic yield is composed of six elementary elastoplastic yields which define the onset of vertical compaction, horizontal compaction, vertical tensile fracturing, horizontal tensile fracturing, subvertical shear fracturing, and subhorizontal shear fracturing. Due to the consolidation, most of the parameters that describe the physical properties of the sediments evolve with the geological times. One difficulty is to quantify the degree of evolution of the porous medium during its geological history. Here, we have chosen to measure the evolution of the sediments by their porosity. The local simulations showed that fracturing may occur is numerous configurations. Some of these configurations indicate that the sediments can reach the limit of its elastic

  18. Upfront predictions of hydraulic fracturing and gas production in underexplored shale gas basins: Example of the posidonia shale formation in the Netherlands

    NARCIS (Netherlands)

    TerHeege, J.H.; Zijp, M.; DeBruin, G.; Buijze, L.

    2014-01-01

    Upfront predictions of hydraulic fracturing and gas production of potential shale gas targets in Europe are important as often large potential resources are deduced without detailed knowledge on the potential for successful stimulation. Such predictions are challenging as they need to be based on li

  19. School and Community Impacts of Hydraulic Fracturing within Pennsylvania's Marcellus Shale Region, and the Dilemmas of Educational Leadership in Gasfield Boomtowns

    Science.gov (United States)

    Schafft, Kai A.; Biddle, Catharine

    2014-01-01

    Innovations associated with gas and oil drilling technology, including new hydraulic fracturing and horizontal drilling techniques, have recently led to dramatic boomtown development in many rural areas that have endured extended periods of economic decline. The Marcellus Shale play, one of the world's largest gas-bearing shale formations,…

  20. Sweet spots for hydraulic fracturing oil or gas production in underexplored shales using key performance indicators: Example of the Posidonia Shale formation in the Netherlands

    NARCIS (Netherlands)

    Heege, J.H. ter; Zijp, M.H.A.A.; Nelkamp, S.

    2015-01-01

    While extensive data and experiences are available for hydraulic fracturing and hydrocarbon production from shales in the U.S.A., such a record is lacking in many underexplored shale basins worldwide. As limited data is usually available in these basins, analysis of shale prospectivity and identific

  1. Energy Release Rate in hydraulic fracture: can we neglect an impact of the hydraulically induced shear stress?

    CERN Document Server

    Wrobel, Michal; Piccolroaz, Andrea

    2016-01-01

    A novel hydraulic fracture (HF) formulation is introduced which accounts for the hydraulically induced shear stress at the crack faces. It utilizes a general form of the elasticity operator alongside a revised fracture propagation condition based on the critical value of the energy release rate. It is shown that the revised formulation describes the underlying physics of HF in a more accurate way and is in agreement with the asymptotic behaviour of the linear elastic fracture mechanics. A number of numerical simulations by means of the universal HF algorithm previously developed in Wrobel & Mishuris (2015) are performed in order to: i) compare the modified HF formulation with its classic counterpart and ii) investigate the peculiarities of the former. Computational advantages of the revised HF model are demonstrated. Asymptotic estimations of the main solution elements are provided for the cases of small and large toughness. The modified formulation opens new ways to analyse the physical phenomenon of HF ...

  2. Environmental concerns and regulatory initiatives related to hydraulic fracturing in shale gas formations: potential implications for North American gas supply

    Energy Technology Data Exchange (ETDEWEB)

    Sumi, Lisa [Earthworks (Canada)

    2010-09-15

    Shale gas resources have been referred to as a game changer for North America and it is expected that shale gas will account for over 30% of the natural gas production in North America by 2020. However, the development of this resource has raised several concerns, notably in terms of water use and contamination; more stringent regulations could be implemented in the coming years. The aim of this paper is to present the effect that more stringent regulations would have on gas development in the Marcellus shale, which accounts for 20% of North American shale gas production. Information on hydraulic fracturing and its environmental impacts is provided herein, along with information on the regulatory initiatives underway in the Marcellus shale region. This paper pointed out that novel regulations relating to shale gas development could significantly reduce the growth in shale gas production.

  3. Detection of water contamination from hydraulic fracturing wastewater: a μPAD for bromide analysis in natural waters.

    Science.gov (United States)

    Loh, Leslie J; Bandara, Gayan C; Weber, Genevieve L; Remcho, Vincent T

    2015-08-21

    Due to the rapid expansion in hydraulic fracturing (fracking), there is a need for robust, portable and specific water analysis techniques. Early detection of contamination is crucial for the prevention of lasting environmental damage. Bromide can potentially function as an early indicator of water contamination by fracking waste, because there is a high concentration of bromide ions in fracking wastewaters. To facilitate this, a microfluidic paper-based analytical device (μPAD) has been developed and optimized for the quantitative colorimetric detection of bromide in water using a smartphone. A paper microfluidic platform offers the advantages of inexpensive fabrication, elimination of unstable wet reagents, portability and high adaptability for widespread distribution. These features make this assay an attractive option for a new field test for on-site determination of bromide.

  4. FAST TRACK PAPER: The creation of an asymmetric hydraulic fracture as a result of driving stress gradients

    Science.gov (United States)

    Fischer, T.; Hainzl, S.; Dahm, T.

    2009-10-01

    Hydraulic fracture stimulation is frequently performed in hydrocarbon reservoirs and geothermal systems to increase the permeability of the rock formation. These hydraulic fractures are often mapped by hypocentres of induced microearthquakes. In some cases microseismicity exhibits asymmetry relative to the injection well, which can be interpreted by unequal conditions for fracture growth at opposite sides of the well or by observation effects. Here we investigate the role of the lateral change of the minimum compressive stress. We use a simple model to describe the relation among the lateral stress gradient, the mean viscous pressure gradients in the fracture wings, the fracture geometry, and the net pressure in the fracture. Our model predicts a faster fracture growth in the direction of decreasing stress and a limited growth in the opposite direction. We derive a simple relationship to estimate the lateral stress gradient from the injection pressure and the shape of the seismic hypocentre cloud. The model is tested by microseismic data obtained during stimulation of a Canyon Sands gas field in West Texas. Using a maximum likelihood method we fit the parameters of the asymmetric fracture model to the space-time pattern of hypocentres. The estimated stress gradients per metre are in the range from 0.008 to 0.010 times the bottom-hole injection overpressure (8-10 kPam-1 assuming the net pressure of 1 MPa). Such large horizontal gradients in the order of the hydrostatic gradient could be caused by the inhomogeneous extraction of gas resulting in a lateral change of the effective normal stress acting normal to the fracture wall.

  5. The Pennsylvania Experience with Hydraulic Fracturing for Shale Gas Development: Relatively Infrequent Water Quality Incidents with Lots of Public Attention

    Science.gov (United States)

    Brantley, S. L.; Li, Z.; Yoxtheimer, D.; Vidic, R.

    2015-12-01

    New techniques of hydraulic fracturing - "fracking" - have changed the United States over the last 10 years into a leading producer of natural gas extraction from shale. The first such gas well in Pennsylvania was drilled and completed using high-volume hydraulic fracturing in 2004. By late 2014, more than 8500 of these gas wells had been drilled in the Marcellus Shale gas field in Pennsylvania alone. Almost 1000 public complaints about groundwater quality were logged by the PA Department of Environmental Protection (PA DEP) between 2008 and 2012. Only a fraction of these were attributed to unconventional gas development. The most common problem was gas migration into drinking water, but contamination incidents also included spills, seepage, or leaks of fracking fluids, brine salts, or very occasionally, radioactive species. Many problems of gas migration were from a few counties in the northeastern part of the state. However, sometimes one gas well contaminated multiple water wells. For example, one gas well was reported by the state regulator to have contaminated 18 water wells with methane near Dimock PA. It can be argued that such problems at a relatively small fraction of gas wells initiated pockets of pushback against fracking worldwide. This resistance to fracking has grown even though fracking has been in use in the U.S.A. since the 1940s. We have worked as part of an NSF-funded project (the Shale Network) to share water quality data and publish it online using the CUAHSI Hydrologic Information System. Sharing data has led to collaborative investigation of specific contamination incidents to understand how problems can occur, and to efforts to quantify the frequency of impacts. The Shale Network efforts have also highlighted the need for more transparency with water quality data in the arena related to the energy-water nexus. As more data are released, new techniques of data analysis will allow better understanding of how to tune best practices to be

  6. Seismic monitoring of hydraulic fracturing: techniques for determining fluid flow paths and state of stress away from a wellbore

    Energy Technology Data Exchange (ETDEWEB)

    Fehler, M.; House, L.; Kaieda, H.

    1986-01-01

    Hydraulic fracturing has gained in popularity in recent years as a way to determine the orientations and magnitudes of tectonic stresses. By augmenting conventional hydraulic fracturing measurements with detection and mapping of the microearthquakes induced by fracturing, we can supplement and idependently confirm information obtained from conventional analysis. Important information obtained from seismic monitoring includes: the state of stress of the rock, orientation and spacing of the major joint sets, and measurements of rock elastic parameters at locations distant from the wellbore. While conventional well logging operations can provide information about several of these parameters, the zone of interrogation is usually limited to the immediate proximity of the borehole. The seismic waveforms of the microearthquakes contain a wealth of information about the rock in regions that are otherwise inaccessible for study. By reliably locating the hypocenters of many microearthquakes, we have inferred the joint patterns in the rock. We observed that microearthquake locations do not define a simple, thin, planar distribution, that the fault plane solutions are consistent with shear slippage, and that spectral analysis indicates that the source dimensions and slip along the faults are small. Hence we believe that the microearthquakes result from slip along preexisting joints, and not from tensile extension at the tip of the fracture. Orientations of the principal stresses can be estimated by using fault plane solutions of the larger microearthquakes. By using a joint earthquake location scheme, and/or calibrations with downhole detonators, rock velocities and heterogeneities thereof can be investigated in rock volumes that are far enough from the borehole to be representative of intrincis rock properties.

  7. Hydraulic fracturing and wellbore completion of coalbed methane wells in the Powder River Basin, Wyoming: Implications for water and gas production

    Energy Technology Data Exchange (ETDEWEB)

    Colmenares, L.B.; Zoback, M.D. [Stanford University, Stanford, CA (United States). Dept. of Geophysics

    2007-01-15

    Excessive water production (more than 7000 bbl/month per well) from many coalbed methane (CBM) wells in the Powder River Basin of Wyoming is also associated with significant delays in the time it takes for gas production to begin. Analysis of about 550 water-enhancement activities carried out during well completion demonstrates that such activities result in hydraulic fracturing of the coal. Water-enhancement activities, consists of pumping 60 bbl of water/min into the coal seam during approximately 15 min. This is done to clean the well-bore and to enhance CBM production. Hydraulic fracturing is of concern because vertical hydraulic fracture growth could extend into adjacent formations and potentially result in excess CBM water production and inefficient depressurization of coals. Analysis of the pressure-time records of the water-enhancement tests enabled us to determine the magnitude of the least principal stress (S{sub 3}) in the coal seams of 372 wells. These data reveal that because S{sub 3} switches between the minimum horizontal stress and the overburden at different locations, both vertical and horizontal hydraulic fracture growth is inferred to occur in the basin, depending on the exact location and coal layer. Relatively low water production is observed for wells with inferred horizontal fractures, whereas all of the wells associated with excessive water production are characterized by inferred vertical hydraulic fractures. The reason wells with exceptionally high water production show delays in gas production appears to be inefficient depressurization of the coal caused by water production from the formations outside the coal. To minimize CBM water production, we recommend that in areas of known vertical fracture propagation, the injection rate during the water-enhancement tests should be reduced to prevent the propagation of induced fractures into adjacent water-bearing formations.

  8. Characteristics and management of flowback/produced water from hydraulically fractured wells in California - findings from the California SB 4 assessment

    Science.gov (United States)

    Varadharajan, C.; Cooley, H.; Heberger, M. G.; Stringfellow, W. T.; Domen, J. K.; Sandelin, W.; Camarillo, M. K.; Jordan, P. D.; Reagan, M. T.; Donnelly, K.; Birkholzer, J. T.; Long, J. C. S.

    2015-12-01

    As part of a recent assessment of well stimulation in California, we analyzed the hazards and potential impacts of hydraulic fracturing (the primary form of well stimulation in California) on water resources, which included an analysis of the quantity and quality of flowback/produced water generated, current management and disposal practices, associated potential release mechanisms and transport pathways that can lead to contaminants being released into the environment, and practices to mitigate or avoid impacts from produced water on water resources. The wastewater returned after stimulation includes "recovered fluids" (flowback fluids collected into tanks following stimulation, but before the start of production) and "produced water" (water extracted with oil and gas during production). In contrast to hydraulic fracturing in regions with primarily gas production, the quantities of recovered fluids from hydraulically fractured wells in California are small in comparison to the fluids injected (typically fracturing fluids is likely present in produced water from wells that have been hydraulically fractured. Chemical measurements of recovered fluids show that some samples can contain high levels of some contaminants, including total carbohydrates (indicating the presence of guar, a component of fracturing fluid), total dissolved solids (TDS), trace elements and naturally occurring radioactive material (NORM). Data on produced water chemistry are more limited. In California, produced water is typically managed via pipelines and disposed or reused in many ways. A majority of produced water from hydraulically fractured wells in California is disposed in percolation pits, many of which may lie in areas with good groundwater quality. Some of the remaining produced water is injected into Class II wells; although a few of the wells are under review or have been shut down since they were injecting into aquifers. Other methods of management of produced water include reuse

  9. Geology

    Data.gov (United States)

    Kansas Data Access and Support Center — This database is an Arc/Info implementation of the 1:500,000 scale Geology Map of Kansas, M­23, 1991. This work wasperformed by the Automated Cartography section of...

  10. A road damage and life-cycle greenhouse gas comparison of trucking and pipeline water delivery systems for hydraulically fractured oil and gas field development in Colorado.

    Science.gov (United States)

    Duthu, Ray C; Bradley, Thomas H

    2017-01-01

    The process of hydraulic fracturing for recovery of oil and natural gas uses large amounts of fresh water and produces a comparable amount of wastewater, much of which is typically transported by truck. Truck transport of water is an expensive and energy-intensive process with significant external costs including roads damages, and pollution. The integrated development plan (IDP) is the industry nomenclature for an integrated oil and gas infrastructure system incorporating pipeline-based transport of water and wastewater, centralized water treatment, and high rates of wastewater recycling. These IDP have been proposed as an alternative to truck transport systems so as to mitigate many of the economic and environmental problems associated with natural gas production, but the economic and environmental performance of these systems have not been analyzed to date. This study presents a quantification of lifecycle greenhouse gas (GHG) emissions and road damages of a generic oil and gas field, and of an oil and gas development sited in the Denver-Julesburg basin in the northern Colorado region of the US. Results demonstrate that a reduction in economic and environmental externalities can be derived from the development of these IDP-based pipeline water transportation systems. IDPs have marginal utility in reducing GHG emissions and road damage when they are used to replace in-field water transport, but can reduce GHG emissions and road damage by factors of as much as 6 and 7 respectively, when used to replace fresh water transport and waste-disposal routes for exemplar Northern Colorado oil and gas fields.

  11. Transport of hydraulic fracturing waste from Pennsylvania wells: A county-level analysis of road use and associated road repair costs.

    Science.gov (United States)

    Patterson, Lauren A; Maloney, Kelly O

    2016-10-01

    Pennsylvania's rapid unconventional oil and gas (UOG) development-from a single well in 2004 to more than 6700 wells in 2013-has dramatically increased UOG waste transport by heavy trucks. This study quantified the amount of UOG waste and the distance it traveled between wells and disposal facilities on each type of road in each county between July 2010 and December 2013. In addition, the study estimated the associated financial costs to each county's road infrastructure over that period. We found that UOG wells produced a median wastewater volume of 1294 m(3) and a median of 89,267 kg of solid waste. The median number of waste-transport truck trips per well was 122. UOG wells existed in 38 Pennsylvania counties, but we estimated trucks transporting well waste traveled through 132 counties, including counties in West Virginia, Ohio, and New York. Median travel distance varied by disposal type, from 106 km to centralized treatment facilities up to 237 km to injection wells. Local roads experienced the greatest amount of truck traffic and associated costs ($1.1-6.5 M) and interstates, the least ($0.3-1.6 M). Counties with oil and gas development experienced the most truck traffic and incurred the highest associated roadway costs. However, many counties outside the active development area also incurred roadway repair costs, highlighting the extension of UOG development's spatial footprint beyond the active development area. An online data visualization tool is available here: www.nicholasinstitute.duke.edu/transportation-of-hydraulic-fracturing-waste.

  12. Transport of hydraulic fracturing waste from Pennsylvania wells: A county-level analysis of road use and associated road repair costs

    Science.gov (United States)

    Patterson, Lauren A.; Maloney, Kelly O.

    2016-01-01

    Pennsylvania’s rapid unconventional oil and gas (UOG) development—from a single well in 2004 to more than 6700 wells in 2013—has dramatically increased UOG waste transport by heavy trucks. This study quantified the amount of UOG waste and the distance it traveled between wells and disposal facilities on each type of road in each county between July 2010 and December 2013. In addition, the study estimated the associated financial costs to each county’s road infrastructure over that period. We found that UOG wells produced a median wastewater volume of 1294 m3 and a median of 89,267 kg of solid waste. The median number of waste-transport truck trips per well was 122. UOG wells existed in 38 Pennsylvania counties, but we estimated trucks transporting well waste traveled through 132 counties, including counties in West Virginia, Ohio, and New York. Median travel distance varied by disposal type, from 106 km to centralized treatment facilities up to 237 km to injection wells. Local roads experienced the greatest amount of truck traffic and associated costs ($1.1–6.5 M) and interstates, the least ($0.3–1.6 M). Counties with oil and gas development experienced the most truck traffic and incurred the highest associated roadway costs. However, many counties outside the active development area also incurred roadway repair costs, highlighting the extension of UOG development’s spatial footprint beyond the active development area. An online data visualization tool is available here: www.nicholasinstitute.duke.edu/transportation-of-hydraulic-fracturing-waste.

  13. 顶板穿层钻孔水力压裂现场数值模拟研究%Roof Layer Drilling Hydraulic Fracturing Field Numerical Simulation Research

    Institute of Scientific and Technical Information of China (English)

    王林征

    2015-01-01

    Based on the theory of hydraulic fracturing antireflection mechanism,take Henan Energy Chemical Group of Jiaozuo Mining Group 21 Coal Seam as a parameter to the actual measured data,to play 22111 transportation lane roof extraction layer drilling to hy-draulic fracturing of coal body,and using RFPA2D -Flow hydraulic fracturing field simulation software in Mazhuang Coal Mine. Ana-lyzed the produce of the coal seam in the process of hydraulic fracturing fracture and well versed in,and around the borehole after frac-turing principal stress and the change of permeability coefficient,known around the borehole after fracturing coal principal stress is sig-nificantly reduced and the permeability coefficient increased significantly. And through the on-site hydraulic fracturing extraction data analysis:the hiatal area of influence puckering average daily drainage is pure gas flow pressure in no impact on regional group extraction holes per 35. 35 times that of the gas extraction from pure flow extraction pore gas concentration to increase 1. 34 times on average. Hy-draulic fracturing can significantly increase the extraction effect.%以水力压裂增透机理为理论基础,以河南能源化工集团焦作煤业集团二1 煤层的现场实测数据为参数,对演马庄矿22111运输巷顶板抽采巷打顶板穿层钻孔对煤体进行水力压裂,并运用 RFPA2D -Flow软件进行水力压裂现场模拟.通过分析水力压裂过程中煤层裂隙的产生和贯通,以及压裂后钻孔周围主应力和渗透系数的变化,可知压裂后钻孔周围煤层主应力得到明显降低和渗透系数得到显著增加.并通过现场水力压裂抽采数据分析得出:压裂孔影响区域单孔日均抽放纯瓦斯流量是压裂孔未影响区域组抽采孔日均瓦斯抽采纯流量的35. 35倍,抽采孔瓦斯浓度平均要提高1. 34倍.水力压裂能显著增加抽采效果.

  14. Viral Predation and Host Immunity Structure Microbial Communities in a Terrestrial Deep Subsurface, Hydraulically Fractured Shale System

    Science.gov (United States)

    Daly, R. A.; Mouser, P. J.; Trexler, R.; Wrighton, K. C.

    2014-12-01

    Despite a growing appreciation for the ecological role of viruses in marine and gut systems, little is known about their role in the terrestrial deep (> 2000 m) subsurface. We used assembly-based metagenomics to examine the viral component in fluids from hydraulically fractured Marcellus shale gas wells. Here we reconstructed microbial and viral genomes from samples collected 7, 82, and 328 days post fracturing. Viruses accounted for 4.14%, 0.92% and 0.59% of the sample reads that mapped to the assembly. We identified 6 complete, circularized viral genomes and an additional 92 viral contigs > 5 kb with a maximum contig size of 73.6 kb. A BLAST comparison to NCBI viral genomes revealed that 85% of viral contigs had significant hits to the viral order Caudovirales, with 43% of sequences belonging to the family Siphoviridae, 38% to Myoviridae, and 12% to Podoviridae. Enrichment of Caudovirales viruses was supported by a large number of predicted proteins characteristic of tailed viruses including terminases (TerL), tape measure, tail formation, and baseplate related proteins. The viral contigs included evidence of lytic and temperate lifestyles, with the 7 day sample having the greatest number of detected lytic viruses. Notably in this sample, the most abundant virus was lytic and its inferred host, a member of the Vibrionaceae, was not detected at later time points. Analyses of CRISPR sequences (a viral and foreign DNA immune system in bacteria and archaea), linked 18 viral contigs to hosts. CRISPR linkages increased through time and all bacterial and archaeal genomes recovered in the final time point had genes for CRISPR-mediated viral defense. The majority of CRISPR sequences linked phage genomes to several Halanaerobium strains, which are the dominant and persisting members of the community inferred to be responsible for carbon and sulfur cycling in these shales. Network analysis revealed that several viruses were present in the 82 and 328 day samples; this viral

  15. Hydraulic fracturing to enhance geothermal energy recovery in deep and tight formations. Modell approach in petrothermy research project OPTIRISS

    Energy Technology Data Exchange (ETDEWEB)

    Rafiee, M.M.; Schmitz, S.; Barsch, M. [DBI - Gastechnologisches Institut gGmbH, Freiberg (Germany)

    2013-08-01

    In Germany numerous projects were successfully conducted in developments of geothermal energy which applied so far mostly for the hydrothermal deposit type. In Thuringia and Saxony there are currently project developments of geothermal resource taking into account for deep, tight formations in petrothermy and Enhanced geothermal system, (EGS). One of the potential tasks in generating these petrothermal producers and in the design of the underground power plant appears to be hydraulic fracturing with multi frac method. This is to create the heat exchanger surfaces in the rock and ensure maximum volumetric flow through it. Therefore it is very important for a sustainable heat production. However the promise of its adequate conductivity in the deep formation is one of the dominant contests in geothermal energy industry. In a multi frac method, two wells (normally horizontal wellbores at different depths) are drilled in direction of minimum horizontal stress of the formation rock. By multiple frac operation in separate sections, flow paths are generated between the wells through which it is possible to extract the heat from the rock. The numerical simulation of hydraulic fracture propagation processes in the rock is mainly from the research in the area of oil and gas industry. These techniques are mainly used for very low permeable formations in petroleum engineering (e.g. Shale gas). The development is at the beginning for EGS (e.g. granites). In this work single and multi fracking propagation processes in a synthetic example of deep hard formation are investigated. The numerical simulation is carried out to design and characterize frac processes and frac dimensions. Sensitivities to various rock parameters and different process designs are examined and optimum criteria are concluded. This shows that the minimum stress profile has the most effective role and should be modelled properly. The analysis indicates the optimum fracture length and height for adequate thermal

  16. Numerical simulation of the environmental impact of hydraulic fracturing of tight/shale gas reservoirs on near-surface ground water: background, base cases, shallow reservoirs, short-term gas and water transport

    Science.gov (United States)

    Researchers examined gas and water transport between a deep tight shale gas reservoir and a shallow overlying aquifer in the two years following hydraulic fracturing, assuming a pre-existing connecting pathway.

  17. Bed load proppant transport during slickwater hydraulic fracturing: insights from comparisons between published laboratory data and correlations for sediment and pipeline slurry transport

    CERN Document Server

    McClure, Mark W

    2016-01-01

    Bed load transport is the movement of particles along the top of a bed through rolling, saltation, and suspension created by turbulent lift above the bed surface. In recent years, there has been a resurgence of interest in the idea that bed load transport is significant for proppant transport during hydraulic fracturing. However, scaling arguments suggest that bed load transport is only dominant in the laboratory and is negligible at the field scale. I review laboratory experiments that have been used to develop concepts of bed load transport in hydraulic fracturing. I also review the scaling arguments and laboratory results that have been used to argue that viscous drag, not bed load transport, is dominant at the field scale. I compare literature correlations for fluvial sediment transport and for pipeline slurry transport with published laboratory data on proppant transport in slot flow. The comparisons indicate that fluvial transport correlations are suitable for predicting the rate of sediment erosion due...

  18. Support to the identification of potential risks for the environment and human health arising from hydrocarbons operations involving hydraulic fracturing in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Broomfield, L.; Lelland, A.

    2012-09-15

    The potential risks for the environment and human health arising from shale gas production (hydraulic fracturing) in Europe are assessed. As readily accessible oil and gas reserves are becoming progressively limited, the energy supply industry is turning more to unconventional reserves, which were previously too complex or too expensive to extract, like shale gas. There are significant shale gas reserves in Europe. Permission is being sought in many EU Member States for exploratory works and to bring forward projects for hydraulic fracturing and extraction of shale gas. As with any drilling and extraction process, shale gas extraction brings environmental and health risks which need to be understood and addressed. CE Delft conducted the legal assessment on shale gas related EU legislation. Gaps and uncertainties have been addressed, but no real risks within the legislation have been discovered. A large part of the shale gas related legislation is part of the individual member states legislation and not directly addressed by EU legislation.

  19. Modeling potential occupational inhalation exposures and associated risks of toxic organics from chemical storage tanks used in hydraulic fracturing using AERMOD.

    Science.gov (United States)

    Chen, Huan; Carter, Kimberly E

    2017-05-01

    Various toxic chemicals used in hydraulic fracturing fluids may influence the inherent health risks associated with these operations. This study investigated the possible occupational inhalation exposures and potential risks related to the volatile organic compounds (VOCs) from chemical storage tanks and flowback pits used in hydraulic fracturing. Potential risks were evaluated based on radial distances between 5 m and 180 m from the wells for 23 contaminants with known inhalation reference concentration (RfC) or inhalation unit risks (IUR). Results show that chemicals used in 12.4% of the wells posed a potential acute non-cancer risks for exposure and 0.11% of the wells with may provide chronic non-cancer risks for exposure. Chemicals used in 7.5% of the wells were associated with potential acute cancer risks for exposure. Those chemicals used in 5.8% of the wells may be linked to chronic cancer risks for exposure. While eight organic compounds were associated with acute non-cancer risks for exposure (>1), methanol the major compound in the chemical storage tanks (1.00-45.49) in 7,282 hydraulic fracturing wells. Wells with chemicals additives containing formaldehyde exhibited both acute and chronic cancer risks for exposure with IUR greater than 10(-6), suggesting formaldehyde was the dominant contributor to both types of risks for exposure in hydraulic fracturing. This study also found that due to other existing on-site emission sources of VOCs and the geographically compounded air concentrations from other surrounding wells, chemical emissions data from storage tanks and flowback pits used in this study were lower than reported concentrations from field measurements where higher occupational inhalation risks for exposure may be expected.

  20. Comparative Analysis of Hydraulic Fracturing Wastewater Practices in Unconventional Shale Development: Newspaper Coverage of Stakeholder Concerns and Social License to Operate

    Directory of Open Access Journals (Sweden)

    Joel Gehman

    2016-09-01

    Full Text Available In this article we review prior literature regarding the concept of social license to operate, and related concepts, including corporate social responsibility, sustainable development, stakeholder management and cumulative effects. Informed by these concepts, we search for newspaper articles published in North American provinces and states where the Barnett, Duvernay, Marcellus and Montney shale plays are located. Using these data, we tabulate coverage of stakeholder concerns related to hydraulic fracturing and wastewater practices, and compare the extent to which these concerns vary over place and time. Our vocabulary analyses identify differences in the types and quantities of newspaper coverage devoted to concerns regarding hydraulic fracturing activities in general and wastewater practices in particular. We interpret these differences as suggesting that obtaining a social license to operate is likely not a one size fits all proposition. By understanding which stakeholder concerns are most salient in particular places and times, oil and gas operators and regulators can better tailor their strategies and policies to address local concerns. In other words, the findings from this study indicate that conventional understandings of risk as a technical or economic problem may not be adequate for dealing with unconventional resource challenges such as hydraulic fracturing. Operators and regulators may also need to manage social and cultural risks.

  1. A web-based multicriteria evaluation of spatial trade-offs between environmental and economic implications from hydraulic fracturing in a shale gas region in Ohio.

    Science.gov (United States)

    Liu, X; Gorsevski, P V; Yacobucci, M M; Onasch, C M

    2016-06-01

    Planning of shale gas infrastructure and drilling sites for hydraulic fracturing has important spatial implications. The evaluation of conflicting and competing objectives requires an explicit consideration of multiple criteria as they have important environmental and economic implications. This study presents a web-based multicriteria spatial decision support system (SDSS) prototype with a flexible and user-friendly interface that could provide educational or decision-making capabilities with respect to hydraulic fracturing site selection in eastern Ohio. One of the main features of this SDSS is to emphasize potential trade-offs between important factors of environmental and economic ramifications from hydraulic fracturing activities using a weighted linear combination (WLC) method. In the prototype, the GIS-enabled analytical components allow spontaneous visualization of available alternatives on maps which provide value-added features for decision support processes and derivation of final decision maps. The SDSS prototype also facilitates nonexpert participation capabilities using a mapping module, decision-making tool, group decision module, and social media sharing tools. The logical flow of successively presented forms and standardized criteria maps is used to generate visualization of trade-off scenarios and alternative solutions tailored to individual user's preferences that are graphed for subsequent decision-making.

  2. An approximate solution for a penny-shaped hydraulic fracture that accounts for fracture toughness, fluid viscosity and leak-off

    Science.gov (United States)

    Dontsov, E. V.

    2016-12-01

    This paper develops a closed-form approximate solution for a penny-shaped hydraulic fracture whose behaviour is determined by an interplay of three competing physical processes that are associated with fluid viscosity, fracture toughness and fluid leak-off. The primary assumption that permits one to construct the solution is that the fracture behaviour is mainly determined by the three-process multiscale tip asymptotics and the global fluid volume balance. First, the developed approximation is compared with the existing solutions for all limiting regimes of propagation. Then, a solution map, which indicates applicability regions of the limiting solutions, is constructed. It is also shown that the constructed approximation accurately captures the scaling that is associated with the transition from any one limiting solution to another. The developed approximation is tested against a reference numerical solution, showing that accuracy of the fracture width and radius predictions lie within a fraction of a per cent for a wide range of parameters. As a result, the constructed approximation provides a rapid solution for a penny-shaped hydraulic fracture, which can be used for quick fracture design calculations or as a reference solution to evaluate accuracy of various hydraulic fracture simulators.

  3. Hydraulic Fracturing of 403 Shallow Diatomite Wells in South Belridge Oil Field, Kern County, California, in 2014

    Science.gov (United States)

    Wynne, D. B.; Agusiegbe, V.

    2015-12-01

    We examine all 403 Hydraulic Fracture (HF) jobs performed by Aera Energy, LLC, in the South Belridge oil field, Kern County, CA in 2014. HFs in the South Belridge oil field are atypical amongst North American plays because the reservoir is shallow and produced via vertical wells. Our data set constitutes 88% of all HF jobs performed in CA oil fields in calendar-2014. The South Belridge field produces 11% of California's oil and the shallow HFs performed here differ from most HFs performed elsewhere. We discuss fracture modeling and methods and summary statistics, and modelled dimensions of fractures and their relationships to depth and reservoir properties. The 403 HFs were made in the diatomite-dominated Reef Ridge member of the Monterey Formation. The HFs began at an average depth of 1047 feet below ground (ft TVD) and extended an average of 626 ft vertically downward. The deepest initiation of HF was at 2380 ft and the shallowest cessation was at 639 ft TVD. The average HF was performed using 1488 BBL (62,496 gallons) of water. The HFs were performed in no more than 6 stages and nearly all were completed within one day. We (1) compare metrics of the South Belridge sample group with recent, larger "all-CA" and nationwide samples; and (2) conclude that if relationships of reservoir properties, well completion and HF are well understood, shallow diatomite HF may be optimized to enhance production while minimizing environmental impact.

  4. Capturing the complex behavior of hydraulic fracture stimulation through multi-physics modeling, field-based constraints, and model reduction

    Science.gov (United States)

    Johnson, S.; Chiaramonte, L.; Cruz, L.; Izadi, G.

    2016-12-01

    Advances in the accuracy and fidelity of numerical methods have significantly improved our understanding of coupled processes in unconventional reservoirs. However, such multi-physics models are typically characterized by many parameters and require exceptional computational resources to evaluate systems of practical importance, making these models difficult to use for field analyses or uncertainty quantification. One approach to remove these limitations is through targeted complexity reduction and field data constrained parameterization. For the latter, a variety of field data streams may be available to engineers and asset teams, including micro-seismicity from proximate sites, well logs, and 3D surveys, which can constrain possible states of the reservoir as well as the distributions of parameters. We describe one such workflow, using the Argos multi-physics code and requisite geomechanical analysis to parameterize the underlying models. We illustrate with a field study involving a constraint analysis of various field data and details of the numerical optimizations and model reduction to demonstrate how complex models can be applied to operation design in hydraulic fracturing operations, including selection of controllable completion and fluid injection design properties. The implication of this work is that numerical methods are mature and computationally tractable enough to enable complex engineering analysis and deterministic field estimates and to advance research into stochastic analyses for uncertainty quantification and value of information applications.

  5. Hydraulic Fracturing Design of Coal-bed Gas Well%煤层气井水力压裂设计

    Institute of Scientific and Technical Information of China (English)

    张志全; 张军; 许弟龙; 胡东; 张保国; 唐艳

    2001-01-01

    针对煤层气井储层特性和压裂的特殊性,选择了拟三维模型进行水力压裂设计。针对一口具体井的资料进行了模拟计算,计算结果合理。同时就地面注液排量、压裂液稠度系数和地应力差值对裂缝几何形态的影响进行了计算和分析,并提出了相应的建议。%In consideration of reservoir charateristics and particalarity of fracturing of coal-bed gas well,a psuedo 3D fracture model is selected to design the hydraulic fracturing.A simulation calculation is performed with data from a specific well,of which the result is reasonable,at the same time calculation and analysis are conducted on the geometry of fractures based on the displacement of surface injected fluid,density coefficient of fracturing fluid and differential value of earth stress,thus related proposals are made.

  6. Estrogen and androgen receptor activities of hydraulic fracturing chemicals and surface and ground water in a drilling-dense region

    Science.gov (United States)

    Kassotis, Christopher D.; Tillitt, Donald E.; Davis, J. Wade; Hormann, Anette M.; Nagel, Susan C.

    2014-01-01

    The rapid rise in natural gas extraction using hydraulic fracturing increases the potential for contamination of surface and ground water from chemicals used throughout the process. Hundreds of products containing more than 750 chemicals and components are potentially used throughout the extraction process, including more than 100 known or suspected endocrine-disrupting chemicals. We hypothesized thataselected subset of chemicalsusedin natural gas drilling operationsandalso surface and ground water samples collected in a drilling-dense region of Garfield County, Colorado, would exhibit estrogen and androgen receptor activities. Water samples were collected, solid-phase extracted, and measured for estrogen and androgen receptor activities using reporter gene assays in human cell lines. Of the 39 unique water samples, 89%, 41%, 12%, and 46% exhibited estrogenic, antiestrogenic, androgenic, and antiandrogenic activities, respectively. Testing of a subset of natural gas drilling chemicals revealed novel antiestrogenic, novel antiandrogenic, and limited estrogenic activities. The Colorado River, the drainage basin for this region, exhibited moderate levels of estrogenic, antiestrogenic, and antiandrogenic activities, suggesting that higher localized activity at sites with known natural gas–related spills surrounding the river might be contributing to the multiple receptor activities observed in this water source. The majority of water samples collected from sites in a drilling-dense region of Colorado exhibited more estrogenic, antiestrogenic, or antiandrogenic activities than reference sites with limited nearby drilling operations. Our data suggest that natural gas drilling operationsmayresult in elevated endocrine-disrupting chemical activity in surface and ground water.

  7. Hydraulic fracturing in unconventional reservoirs - Identification of hazards and strategies for a quantitative risk assessment

    Science.gov (United States)

    Helmig, R.; Kissinger, A.; Class, H.; Ebigbo, A.

    2012-12-01

    The production of unconventional gas resources, which require a fracking process to be released, such as shale gas, tight gas and coal bed methane, has become an economically attractive technology for a continued supply of fossil-fuel energy sources in many countries. Just recently, a major focus of interest has been directed to hydraulic fracking in Germany. The technology is controversial since it involves severe risks. The main difference in risk with respect to other technologies in the subsurface such as carbon sequestration is that fracking is remunerative, and it is important to distinguish between economical and environmental issues. The hydrofracking process may pose a threat to groundwater resources if fracking fluid or brine can migrate through fault zones into shallow aquifers. Diffuse methane emissions from the gas reservoir may not only contaminate shallow groundwater aquifers but also escape into the atmosphere where methane acts as a greenhouse gas. The working group "Risks in the Geological System" as part of ExxonMobil's hydrofracking dialogue and information dissemination processes was tasked with the assessment of possible hazards posed by migrating fluids as a result of hydrofracking activities. In this work several flow paths for fracking fluid, brine and methane are identified and scenarios are set up to qualitatively estimate under what circumstances these fluids would leak into shallower layers. The parametrization for potential fracking sites in North Rhine-Westphalia and Lower Saxony (both in Germany) is derived from literature using upper and lower bounds of hydraulic parameters. The results show that a significant fluid migration is only possible if a combination of several conservative assumptions are met by a scenario. Another outcome of this work is the demand for further research, as many of the involved processes in the hydrofracking process have yet not been fully understood (e.g. quantification of source terms for methane in the

  8. Mathematical study of fracture face skin in hydraulic fractures%人工裂缝缝壁表皮效应数学模型研究

    Institute of Scientific and Technical Information of China (English)

    才博; 王晓冬; 王欣

    2011-01-01

    针对以往模型进行压裂设计与分析方法对结果偏差较大的实际情况,在对经典裂缝延伸和扩展PKN和KGD理论模型研究的基础上,运用断裂力学和流体耦合方法,建立新的缝壁表皮数学模型,获得新的裂缝缝壁表皮效应分段数学函数.将新模型与以往Cinco-Ley模型进行现场参数计算对比,结果表明:以往认为该表皮效应对产量影响只有5%,新模型表明该表皮效应对产量的影响可以达到50%,新模型揭示了以往认为高效压裂工艺下反而压后减产矛盾现象的真正原因.利用新模型指导压裂设计可降低裂缝缝壁表皮对产量的影响,增强压裂设计对储层的适应性和科学性.现场35井次试验表明,采用新模型后在降低成本的情况下,压裂效果增加1.5倍.%The results of hydraulic fracturing design and analysis were obviously mistaken by the former fracture face skin model.In order to reveal this skin effect more accurately,based on the classical theoretic models of perkins,kern and norgren(PKN) and khristianovic,geertsma and dekerk(KGD),a new mathematical model of fracture face skin with segmentation characteristic was established using fracture mechanics and fluid coupling method.Comparing the new model with the Cinco-Ley model through field data,the results show that the productivity of the Cinco-Ley model was influenced by only 5%,while that of the new model by 50%.This revealed the poor post-fracturing production with fracturing techniques that are regarded as most effective means by many designers.Using this new model,the influence of skin on productivity was reduced and made fracturing treatment more adaptable and scientific.Through field tests on 35 wells,the output was increased 1.5 times and the costs were dramatically cut by new model.

  9. Spatiotemporal Variability in Hydraulic Fracturing Water Use and Water Produced with Shale Gas in the U.S.

    Science.gov (United States)

    Nicot, J. P.; Scanlon, B. R.; Reedy, R. C.

    2016-12-01

    Longer time series and increasing data availability allows more comprehensive assessment of spatiotemporal variability in hydraulic fracturing (HF) water use and flowback/produced (FP) water generation in shale plays in the U.S. In this analysis we quantified HF and FP water volumes for seven major shale gas plays in the U.S. using detailed well by well analyses through 2015. Well count ranges from 1,500 (Utica) to 20,200 (Barnett) with total cumulative? HF water use ranging from 12 billion gallons (bgal) (Utica) to 65 bgal (Barnett). HF water use/well has been increasing over time in many plays and currently ranges from 4.5 mgal/well (Fayetteville) to 10 mgal/well (Utica) (2015). Normalizing by lateral length results in a range of 900 gal/ft (Fayetteville) to 15,600 gal/ft (Marcellus) (2015). FP water volumes are also highly variable, lowest in the Utica and highest in the Barnett. Management of FP water is mostly through disposal into Class II salt water injection wells, with the exception of the Marcellus where >90% of the FP water is reused/recycled. Along the dramatic domestic gas production increase, electricity generation from natural gas has almost doubled since 2000. It is important to consider the water use for HF in terms of the lifecycle of natural gas with HF water consumption. It is equivalent to <10% of the water consumed in natural gas-fired power plants that usually require less water than coal-fired power plants, resulting in net water savings.

  10. Indications of Transformation Products from Hydraulic Fracturing Additives in Shale Gas Wastewater

    Science.gov (United States)

    Elsner, Martin; Hoelzer, Kathrin; Sumner, Andrew J.; Karatum, Osman; Nelson, Robert K.; Drollette, Brian D.; O'Connor, Megan P.; D'Ambro, Emma; Getzinger, Gordon J.; Ferguson, P. Lee; Reddy, Christopher M.; Plata, Desiree L.

    2016-04-01

    Unconventional natural gas development (UNGD) generates large volumes of wastewater, whose detailed composition must be known for adequate risk assessment and treatment. In particular, there is a need to elucidate the structures of organic chemical additives, extracted geogenic compounds, and transformation products. This study investigated six Fayetteville Shale UNGD wastewater samples for their organic composition using purge-and-trap gas chromatography-mass spectrometry (P&T-GC-MS) in combination with liquid-liquid extraction with comprehensive two-dimensional gas chromatography-time of flight-mass spectrometry (GCxGC-TOF-MS). Following application of strict compound identification confidence criteria, we classified compounds according to their putative origin. Samples displayed distinct chemical distributions composed of typical geogenic substances (hydrocarbons), disclosed UNGD additives (e.g., hydrocarbons, phthalates, such as diisobutyl phthalate, and radical initiators, such as azobisisobutyronitrile), and undisclosed compounds (e.g., halogenated hydrocarbons, such as 2-bromohexane or 4-bromoheptane). Undisclosed chloromethyl alkanoates (chloromethyl propanoate, pentanoate, and octanoate) were identified as putative delayed acids (those that release acidic moieties only after hydrolytic cleavage, whose rate could potentially be controlled), suggesting they were deliberately introduced to react in the subsurface. Identification of halogenated methanes and acetones, in contrast, suggested they were formed as unintended by-products. Our study highlights the possibility that UNGD operations generate transformation products, knowledge of which is crucial for risk assessment and treatment strategies, and underscores the value of disclosing potential precursors that are injected into the subsurface.

  11. Indications of Transformation Products from Hydraulic Fracturing Additives in Shale-Gas Wastewater.

    Science.gov (United States)

    Hoelzer, Kathrin; Sumner, Andrew J; Karatum, Osman; Nelson, Robert K; Drollette, Brian D; O'Connor, Megan P; D'Ambro, Emma L; Getzinger, Gordon J; Ferguson, P Lee; Reddy, Christopher M; Elsner, Martin; Plata, Desiree L

    2016-08-02

    Unconventional natural gas development (UNGD) generates large volumes of wastewater, the detailed composition of which must be known for adequate risk assessment and treatment. In particular, transformation products of geogenic compounds and disclosed additives have not been described. This study investigated six Fayetteville Shale wastewater samples for organic composition using a suite of one- and two-dimensional gas chromatographic techniques to capture a broad distribution of chemical structures. Following the application of strict compound-identification-confidence criteria, we classified compounds according to their putative origin. Samples displayed distinct chemical distributions composed of typical geogenic substances (hydrocarbons and hopane biomarkers), disclosed UNGD additives (e.g., hydrocarbons, phthalates such as diisobutyl phthalate, and radical initiators such as azobis(isobutyronitrile)), and undisclosed compounds (e.g., halogenated hydrocarbons, such as 2-bromohexane or 4-bromoheptane). Undisclosed chloromethyl alkanoates (chloromethyl propanoate, pentanoate, and octanoate) were identified as potential delayed acids (i.e., those that release acidic moieties only after hydrolytic cleavage, the rate of which could be potentially controlled), suggesting they were deliberately introduced to react in the subsurface. In contrast, the identification of halogenated methanes and acetones suggested that those compounds were formed as unintended byproducts. Our study highlights the possibility that UNGD operations generate transformation products and underscores the value of disclosing additives injected into the subsurface.

  12. Report on the behalf of the Sustainable Development and Land Planning Commission on the bill project aiming at forbidding the exploration and exploitation of liquid or gaseous hydrocarbon mines by hydraulic fracturing, and abrogating exclusive search permits including projects using this technique; Rapport fait au nom de la Commission du Developpement Durable et de l'Amenagement du Territoire sur la proposition de Loi, visant a interdire l'exploration et l'exploitation des mines d'hydrocarbures liquides ou gazeux par fracturation hydraulique et a abroger les permis exclusifs de recherches comportant des projets ayant recours a cette technique

    Energy Technology Data Exchange (ETDEWEB)

    Havard, M.; Chanteguet, J.P.

    2011-07-01

    In a first part, this report presents the exploitation of liquid and gaseous hydrocarbons as a new gold rush, notably in Canada and in the USA where this exploitation started at the beginning of the 2000's. The authors recall that this resource has been well known for many years, present the technology applied to extract these products: a combination of vertical and horizontal drilling followed by hydraulic fracturing. Then, they outline health and environmental risks associated with hydraulic fracturing, at any stage of the process (important water supply, ground water pollution, used water treatment, use of chemical additives, impact on landscape, greenhouse gas emission). In the second part, the authors notice that France is among the most attractive countries in Europe for the projects of gas and oil companies, and outline the need to reinforce the mining and environmental legal framework. A last part reports the discussions about the bill project articles

  13. Modeling of Hydraulic Fracture Propagation at the kISMET Site Using a Fully Coupled 3D Network-Flow and Quasi- Static Discrete Element Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Jing [Idaho National Lab. (INL), Idaho Falls, ID (United States); Huang, Hai [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mattson, Earl [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wang, Herb F. [Univ. of Wisconsin, Madison, WI (United States); Haimson, Bezalel C. [Univ. of Wisconsin, Madison, WI (United States); Doe, Thomas W. [Golder Associates Inc., Redmond, VA (United States); Oldenburg, Curtis M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dobson, Patrick F. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-02-01

    Aimed at supporting the design of hydraulic fracturing experiments at the kISMET site, ~1500 m below ground in a deep mine, we performed pre-experimental hydraulic fracturing simulations in order to estimate the breakdown pressure, propagation pressure, fracture geometry, and the magnitude of induced seismicity using a newly developed fully coupled three-dimensional (3D) network flow and quasi-static discrete element model (DEM). The quasi-static DEM model, which is constructed by Delaunay tessellation of the rock volume, considers rock fabric heterogeneities by using the “disordered” DEM mesh and adding random perturbations to the stiffness and tensile/shear strengths of individual DEM elements and the elastic beams between them. A conjugate 3D flow network based on the DEM lattice is constructed to calculate the fluid flow in both the fracture and porous matrix. One distinctive advantage of the model is that fracturing is naturally described by the breakage of elastic beams between DEM elements. It is also extremely convenient to introduce mechanical anisotropy into the model by simply assigning orientation-dependent tensile/shear strengths to the elastic beams. In this paper, the 3D hydraulic fracturing model was verified against the analytic solution for a penny-shaped crack model. We applied the model to simulate fracture propagation from a vertical open borehole based on initial estimates of rock mechanical properties and in-situ stress conditions. The breakdown pressure and propagation pressure are directly obtained from the simulation. In addition, the released elastic strain energies of individual fracturing events were calculated and used as a conservative estimate for the magnitudes of the potential induced seismic activities associated with fracturing. The comparisons between model predictions and experimental results are still ongoing.

  14. Development of a new code to solve hydro-mechanical coupling, shear failure and tensile failure due to hydraulic fracturing operations.

    Science.gov (United States)

    María Gómez Castro, Berta; De Simone, Silvia; Carrera, Jesús

    2016-04-01

    Nowadays, there are still some unsolved relevant questions which must be faced if we want to proceed to the hydraulic fracturing in a safe way. How much will the fracture propagate? This is one of the most important questions that have to be solved in order to avoid the formation of pathways leading to aquifer targets and atmospheric release. Will the fracture failure provoke a microseismic event? Probably this is the biggest fear that people have in fracking. The aim of this work (developed as a part of the EU - FracRisk project) is to understand the hydro-mechanical coupling that controls the shear of existing fractures and their propagation during a hydraulic fracturing operation, in order to identify the key parameters that dominate these processes and answer the mentioned questions. This investigation focuses on the development of a new C++ code which simulates hydro-mechanical coupling, shear movement and propagation of a fracture. The framework employed, called Kratos, uses the Finite Element Method and the fractures are represented with an interface element which is zero thickness. This means that both sides of the element lie together in the initial configuration (it seems a 1D element in a 2D domain, and a 2D element in a 3D domain) and separate as the adjacent matrix elements deform. Since we are working in hard, fragile rocks, we can assume an elastic matrix and impose irreversible displacements in fractures when rock failure occurs. The formulation used to simulate shear and tensile failures is based on the analytical solution proposed by Okada, 1992 and it is part of an iterative process. In conclusion, the objective of this work is to employ the new code developed to analyze the main uncertainties related with the hydro-mechanical behavior of fractures derived from the hydraulic fracturing operations.

  15. Roof Weakening of Hydraulic Fracturing for Control of Hanging Roof in the Face End of High Gassy Coal Longwall Mining: A Case Study

    Science.gov (United States)

    Huang, Bingxiang; Wang, Youzhuang

    2016-09-01

    The occurence of hanging roof commonly arises in the face end of longwall coal mining under hard roof conditions. The sudden break and subsequent caving of a hanging roof could result in the extrusion of gas in the gob to the face, causing gas concentrations to rise sharply and to increase to over a safety-limited value. A series of linear fracturing-holes of 32 mm diameter were drilled into the roof of the entries with an anchor rig. According to the theory that the gob should be fully filled with the fragmentized falling roof rock, the drilling depth is determined as being 3 5 times the mining height if the broken expansion coefficient takes an empirical value. Considering the general extension range of cracks and the supporting form of the entryway, the spacing distance between two drilling holes is determined as being 1 2 times the crack's range of extension. Using a mounting pipe, a high pressure resistant sealing device of a small diameter-size was sent to the designated location for the high-pressure hydraulic fracturing of the roof rock. The hydraulic fracturing created the main hydro-fracturing crack and airfoil branch cracks in the interior of the roof-rock, transforming the roof structure and weakening the strength of the roof to form a weak plane which accelerated roof caving, and eventually induced the full caving in of the roof in time with the help of ground pressure. For holes deeper than 4 m, retreating hydraulic fracturing could ensure the uniformity of crack extension. Tested and applied at several mines in Shengdong Mining District, the highest ruptured water pressure was found to be 55 MPa, and the hanging roof at the face end was reduced in length from 12 m to less than 1 2 m. This technology has eliminated the risk of the extrusion of gas which has accumulated in the gob.

  16. Geology of the Waste Treatment Plant Seismic Boreholes

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, D. Brent; Fecht, Karl R.; Reidel, Stephen P.; Bjornstad, Bruce N.; Lanigan, David C.; Rust, Colleen F.

    2007-05-11

    In 2006, the U.S. Department of Energy initiated the Seismic Boreholes Project (SBP) to emplace boreholes at the Waste Treatment Plant (WTP) site in order to obtain direct shear wave velocity (Vs) measurements and other physical property measurements in Columbia River basalt and interbedded sediments of the Ellensburg Formation. The goal was to reduce the uncertainty in the response spectra and seismic design basis, and potentially recover design margin for the WTP. The characterization effort within the deep boreholes included 1) downhole measurements of the velocity properties of the suprabasalt, basalt, and sedimentary interbed sequences, 2) downhole measurements of the density of the subsurface basalt and sediments, and 3) geologic studies to confirm the geometry of the contact between the various basalt and interbedded sediments through examination of retrieved core from the core hole and data collected through geophysical logging of each borehole. This report describes the results of the geologic studies from three mud-rotary boreholes and one cored borehole at the WTP. All four boreholes penetrated the entire Saddle Mountains Basalt and the upper part of the Wanapum Basalt where thick sedimentary interbeds occur between the lava flows. The basalt flows penetrated in Saddle Mountains Basalt included the Umatilla Member, Esquatzel Member, Pomona Member, and the Elephant Mountain Member. The underlying Priest Rapids Member of the Wanapum Basalt also was penetrated. The Ellensburg Formation sediments consist of the Mabton Interbed, the Cold Creek Interbed, the Selah Interbed, and the Rattlesnake Ridge Interbed; the Byron Interbed occurs between two flows of the Priest Rapids Member. The Mabton Interbed marks the contact between the Wanapum and Saddle Mountains Basalts. The thicknesses of the basalts and interbedded sediments were within expected limits. However, a small reverse fault was found in the Pomona Member flow top. This fault has three periods of

  17. Adverse Reproductive and Developmental Health Outcomes Following Prenatal Exposure to a Hydraulic Fracturing Chemical Mixture in Female C57Bl/6 Mice.

    Science.gov (United States)

    Kassotis, Christopher D; Bromfield, John J; Klemp, Kara C; Meng, Chun-Xia; Wolfe, Andrew; Zoeller, R Thomas; Balise, Victoria D; Isiguzo, Chiamaka J; Tillitt, Donald E; Nagel, Susan C

    2016-09-01

    Unconventional oil and gas operations using hydraulic fracturing can contaminate surface and groundwater with endocrine-disrupting chemicals. We have previously shown that 23 of 24 commonly used hydraulic fracturing chemicals can activate or inhibit the estrogen, androgen, glucocorticoid, progesterone, and/or thyroid receptors in a human endometrial cancer cell reporter gene assay and that mixtures can behave synergistically, additively, or antagonistically on these receptors. In the current study, pregnant female C57Bl/6 dams were exposed to a mixture of 23 commonly used unconventional oil and gas chemicals at approximately 3, 30, 300, and 3000 μg/kg·d, flutamide at 50 mg/kg·d, or a 0.2% ethanol control vehicle via their drinking water from gestational day 11 through birth. This prenatal exposure to oil and gas operation chemicals suppressed pituitary hormone concentrations across experimental groups (prolactin, LH, FSH, and others), increased body weights, altered uterine and ovary weights, increased heart weights and collagen deposition, disrupted folliculogenesis, and other adverse health effects. This work suggests potential adverse developmental and reproductive health outcomes in humans and animals exposed to these oil and gas operation chemicals, with adverse outcomes observed even in the lowest dose group tested, equivalent to concentrations reported in drinking water sources. These endpoints suggest potential impacts on fertility, as previously observed in the male siblings, which require careful assessment in future studies.

  18. Use of silica-encapsulated Pseudomonas sp. strain NCIB 9816-4 in biodegradation of novel hydrocarbon ring structures found in hydraulic fracturing waters.

    Science.gov (United States)

    Aukema, Kelly G; Kasinkas, Lisa; Aksan, Alptekin; Wackett, Lawrence P

    2014-08-01

    The most problematic hydrocarbons in hydraulic fracturing (fracking) wastewaters consist of fused, isolated, bridged, and spiro ring systems, and ring systems have been poorly studied with respect to biodegradation, prompting the testing here of six major ring structural subclasses using a well-characterized bacterium and a silica encapsulation system previously shown to enhance biodegradation. The direct biological oxygenation of spiro ring compounds was demonstrated here. These and other hydrocarbon ring compounds have previously been shown to be present in flow-back waters and waters produced from hydraulic fracturing operations. Pseudomonas sp. strain NCIB 9816-4, containing naphthalene dioxygenase, was selected for its broad substrate specificity, and it was demonstrated here to oxidize fundamental ring structures that are common in shale-derived waters but not previously investigated with this or related enzymes. Pseudomonas sp. NCIB 9816-4 was tested here in the presence of a silica encasement, a protocol that has previously been shown to protect bacteria against the extremes of salinity present in fracking wastewaters. These studies demonstrate the degradation of highly hydrophobic compounds by a silica-encapsulated model bacterium, demonstrate what it may not degrade, and contribute to knowledge of the full range of hydrocarbon ring compounds that can be oxidized using Pseudomonas sp. NCIB 9816-4.

  19. Use of Silica-Encapsulated Pseudomonas sp. Strain NCIB 9816-4 in Biodegradation of Novel Hydrocarbon Ring Structures Found in Hydraulic Fracturing Waters

    Science.gov (United States)

    Aukema, Kelly G.; Kasinkas, Lisa; Aksan, Alptekin

    2014-01-01

    The most problematic hydrocarbons in hydraulic fracturing (fracking) wastewaters consist of fused, isolated, bridged, and spiro ring systems, and ring systems have been poorly studied with respect to biodegradation, prompting the testing here of six major ring structural subclasses using a well-characterized bacterium and a silica encapsulation system previously shown to enhance biodegradation. The direct biological oxygenation of spiro ring compounds was demonstrated here. These and other hydrocarbon ring compounds have previously been shown to be present in flow-back waters and waters produced from hydraulic fracturing operations. Pseudomonas sp. strain NCIB 9816-4, containing naphthalene dioxygenase, was selected for its broad substrate specificity, and it was demonstrated here to oxidize fundamental ring structures that are common in shale-derived waters but not previously investigated with this or related enzymes. Pseudomonas sp. NCIB 9816-4 was tested here in the presence of a silica encasement, a protocol that has previously been shown to protect bacteria against the extremes of salinity present in fracking wastewaters. These studies demonstrate the degradation of highly hydrophobic compounds by a silica-encapsulated model bacterium, demonstrate what it may not degrade, and contribute to knowledge of the full range of hydrocarbon ring compounds that can be oxidized using Pseudomonas sp. NCIB 9816-4. PMID:24907321

  20. Geology of the Waste Treatment Plant Seismic Boreholes

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, D. BRENT; Bjornstad, Bruce N.; Fecht, Karl R.; Lanigan, David C.; Reidel, Steve; Rust, Colleen F.

    2007-02-28

    In 2006, DOE-ORP initiated the Seismic Boreholes Project (SBP) to emplace boreholes at the Waste Treatment Plant (WTP) site in order to obtain direct Vs measurements and other physical property measurements in Columbia River basalt and interbedded sediments of the Ellensburg Formation. The goal was to reduce the uncertainty in the response spectra and seismic design basis, and potentially recover design margin for the WTP. The characterization effort within the deep boreholes included 1) downhole measurements of the velocity properties of the suprabasalt, basalt, and sedimentary interbed sequences, 2) downhole measurements of the density of the subsurface basalt and sediments, and 3) confirmation of the geometry of the contact between the various basalt and interbedded sediments through examination of retrieved core from the corehole and data collected through geophysical logging of each borehole. This report describes the results of the geologic studies from three mud-rotary boreholes and one cored borehole at the WTP. All four boreholes penetrated the entire Saddle Mountains Basalt and the upper part of the Wanapum Basalt where thick sedimentary interbeds occur between the lava flows. The basalt flows penetrated in Saddle Mountains Basalt included the Umatilla Member, Esquatzel Member, Pomona Member and the Elephant Mountain Member. The underlying Priest Rapids Member of the Wanapum Basalt was also penetrated. The Ellensburg Formation sediments consist of the Mabton Interbed, the Cold Creek Interbed, the Selah Interbed and the Rattlesnake Ridge Interbed; the Byron Interbed occurs between two flows of the Priest Rapids Member. The Mabton Interbed marks the contact between the Wanapum and Saddle Mountains Basalts. The thicknesses of the basalts and interbedded sediments were within expected limits. However, a small reverse fault was found in the Pomona Member flow top. This fault has three periods of movement and less than 15 feet of repeated section. Most of the

  1. The potential for spills and leaks of hydraulic fracturing related fluids on well sites and from road incidents.

    Science.gov (United States)

    Clancy, Sarah; Worrall, Fred; Davies, Richard; Gluyas, Jon

    2017-04-01

    recovered. The most common cause of leakage each year is equipment failure; these results highlight the need for good regulation and maintenance onsite. The UK's Institute of Directors suggests several shale gas production scenarios for the UK and how this would influence truck movement. One of their scenarios suggests the development of well pads with 10-wells and 40 laterals (one well pad with 10 well each with 4 laterals). This type of well pad would be projected to use 544,000 m3 of water, which would generate between 11155-31288 truck movements over 20 years, or 6.1-17.1 per day if averaged over 5 years. Dairy farmers in the UK produce 11 million m3 of milk a year, which if the tanker has a capacity of 30 m3, equates to approximately 366667 milk tanker journeys a year. This study assesses the number of road incidents and milk tanker spills and predicts the likelihood of such events for fluids involved in hydraulic fracturing.

  2. 心墙水力劈裂与孔压关系的探讨%The analysis of the relationship between hydraulic fracture and the pore pressure

    Institute of Scientific and Technical Information of China (English)

    张红日; 党发宁; 兰素恋; 魏见海

    2012-01-01

    基于Biot固结理论的有效应力二维数值模拟方法,研究了堆石坝的粘土心墙水力劈裂过程中孔隙水压力的变化.分析了坝体竣工期粘土心墙中的拱效应,探讨了从竣工固结到蓄水过程和稳定渗流期粘土心墙中孔隙水压力的变化分布特点,并对心墙发生水力劈裂的可能性进行判断.研究结果表明:堆石坝粘土心墙内部孔隙水压力梯度的模拟分析能更加合理地解释水力劈裂发生与蓄水速度和心墙低渗透性的关系,因此,分析考虑水位上升过程中粘土心墙内孔隙水压力分布情况是研究心墙水力劈裂发生机理的重点.%Based on the consolidation theory of Biot effective stress analysis method, two-dimensional numerical simulation is adopted to study the dam from the completion of the dam to the clay core run-time pore pressure changes in the process. Arching effect of the completion period and the changes with the completion of the process of consolidation on the stability of the water flow in the pore water pressure distribution are analyzed based on the analysis of clay core dams, the mechanism of hydraulic fracture on the basis of the core wall of the dam occurred in the hydraulic is determined with the possibility of splitting. The results show that the simulation of gradient internal pore water pressure for the clay core of rockfilled dam core can reasonably explain the occurrence of hydraulic fracturing with water speed, and the low permeability of the core wall has great effects. When hydraulic fracture occurred with the core wall mechanism of the core wall, the distribution of clay pore water pressure must be taken into account.

  3. Fracture Propagation, Fluid Flow, and Geomechanics of Water-Based Hydraulic Fracturing in Shale Gas Systems and Electromagnetic Geophysical Monitoring of Fluid Migration

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jihoon; Um, Evan; Moridis, George

    2014-12-01

    We investigate fracture propagation induced by hydraulic fracturing with water injection, using numerical simulation. For rigorous, full 3D modeling, we employ a numerical method that can model failure resulting from tensile and shear stresses, dynamic nonlinear permeability, leak-off in all directions, and thermo-poro-mechanical effects with the double porosity approach. Our numerical results indicate that fracture propagation is not the same as propagation of the water front, because fracturing is governed by geomechanics, whereas water saturation is determined by fluid flow. At early times, the water saturation front is almost identical to the fracture tip, suggesting that the fracture is mostly filled with injected water. However, at late times, advance of the water front is retarded compared to fracture propagation, yielding a significant gap between the water front and the fracture top, which is filled with reservoir gas. We also find considerable leak-off of water to the reservoir. The inconsistency between the fracture volume and the volume of injected water cannot properly calculate the fracture length, when it is estimated based on the simple assumption that the fracture is fully saturated with injected water. As an example of flow-geomechanical responses, we identify pressure fluctuation under constant water injection, because hydraulic fracturing is itself a set of many failure processes, in which pressure consistently drops when failure occurs, but fluctuation decreases as the fracture length grows. We also study application of electromagnetic (EM) geophysical methods, because these methods are highly sensitive to changes in porosity and pore-fluid properties due to water injection into gas reservoirs. Employing a 3D finite-element EM geophysical simulator, we evaluate the sensitivity of the crosswell EM method for monitoring fluid movements in shaly reservoirs. For this sensitivity evaluation, reservoir models are generated through the coupled flow

  4. Full waveform approach for the automatic detection and location of acoustic emissions from hydraulic fracturing at Äspö (Sweden)

    Science.gov (United States)

    Ángel López Comino, José; Cesca, Simone; Heimann, Sebastian; Grigoli, Francesco; Milkereit, Claus; Dahm, Torsten; Zang, Arno

    2017-04-01

    A crucial issue to analyse the induced seismicity for hydraulic fracturing is the detection and location of massive microseismic or acoustic emissions (AE) activity, with robust and sufficiently accurate automatic algorithms. Waveform stacking and coherence analysis have been tested for local seismic monitoring and mining induced seismicity improving the classical detection and location methods (e.g. short-term-average/long-term-average and automatic picking of the P and S waves first arrivals). These techniques are here applied using a full waveform approach for a hydraulic fracturing experiment (Nova project 54-14-1) that took place 410 m below surface in the Äspö Hard Rock Laboratory (Sweden). Continuous waveform recording with a near field network composed by eleven AE sensors are processed. The piezoelectric sensors have their highest sensitive in the frequency range 1 to 100 kHz, but sampling rates were extended to 1 MHz. We present the results obtained during the conventional, continuous water-injection experiment HF2 (Hydraulic Fracture 2). The event detector is based on the stacking of characteristic functions. It follows a delay-and-stack approach, where the likelihood of the hypocenter location in a pre-selected seismogenic volume is mapped by assessing the coherence of the P onset times at different stations. A low detector threshold is chosen, in order not to loose weaker events. This approach also increases the number of false detections. Therefore, the dataset has been revised manually, and detected events classified in terms of true AE events related to the fracturing process, electronic noise related to 50 Hz overtones, long period and other signals. The location of the AE events is further refined using a more accurate waveform stacking method which uses both P and S phases. A 3D grid is generated around the hydraulic fracturing volume and we retrieve a multidimensional matrix, whose absolute maximum corresponds to the spatial coordinates of the

  5. Deliberating the perceived risks, benefits, and societal implications of shale gas and oil extraction by hydraulic fracturing in the US and UK

    Science.gov (United States)

    Thomas, Merryn; Partridge, Tristan; Harthorn, Barbara Herr; Pidgeon, Nick

    2017-04-01

    Shale gas and oil production in the US has increased rapidly in the past decade, while interest in prospective development has also arisen in the UK. In both countries, shale resources and the method of their extraction (hydraulic fracturing, or 'fracking') have been met with opposition amid concerns about impacts on water, greenhouse gas emissions, and health effects. Here we report the findings of a qualitative, cross-national deliberation study of public perceptions of shale development in UK and US locations not yet subject to extensive shale development. When presented with a carefully calibrated range of risks and benefits, participants' discourse focused on risks or doubts about benefits, and potential impacts were viewed as inequitably distributed. Participants drew on direct, place-based experiences as well as national contexts in deliberating shale development. These findings suggest that shale gas development already evokes a similar 'signature' of risk across the US and UK.

  6. Evaluating the Risks of Surface Spills Associated with Hydraulic Fracturing Activities to Groundwater Resources: a Modeling Study in the South Platte Alluvial Aquifer

    Science.gov (United States)

    Kanno, C.; McLaughlin, M.; Blotevogel, J.; Benson, D. A.; Borch, T.; McCray, J. E.

    2015-12-01

    Hydraulic fracturing has revolutionized the U.S.'s energy portfolio by making shale reservoirs productive and commercially viable. However, the public is concerned that the chemical constituents in hydraulic fracturing fluid, produced water, or natural gas itself could potentially impact groundwater or adjacent streams. Here, we conduct fate and transport simulations of surface spills, the most likely contamination pathway to occur during oil and gas production operations, to evaluate whether or not these spills pose risks to groundwater quality. We focus on the South Platte Alluvial Aquifer, which is located in the greater Denver metro area and overlaps a zone of high-density oil and gas development. The purpose of this work is to assess the mobility and persistence of chemical contaminants (e.g. biocides, friction reducers, surfactants, hydrocarbons, etc.) —based on sorption to soil, degradation potential, co-contaminant interactions, and spill conditions—and to understand the site characteristics and hydrologic conditions that would make a particular location prone to groundwater quality degradation in the event of an accidental release. We propose a coupled analytical-numerical approach that could be duplicated by environmental consultants. Results suggest that risk of groundwater pollution, based on predicted concentration at the groundwater table, is low in most areas of the South Platte system for the contaminants investigated under common spill conditions. However, substantial risk may exist in certain areas where the groundwater table is shallow. In addition, transport of certain contaminants is influenced by interactions with other constituents in produced or stimulation fluids. By helping to identify locations in the Front Range of Colorado that are at low or high risk for groundwater contamination due to a surface spill, it is our hope that this work will aid in improving prevention, mitigation, and remediation practices so that decision-makers can

  7. How Deep is the Critical Zone: A Scientific Question with Potential Impact For Decision-makers in Areas of Shale-Gas Development and Hydraulic Fracturing

    Science.gov (United States)

    Brantley, S. L.

    2014-12-01

    Citizens living in areas of shale-gas development such as the Marcellus gas play in Pennsylvania and surrounding states are cognizant of the possibility that drilling and production of natural gas -- including hydraulic fracturing -- may have environmental impacts on their water. The Critical Zone is defined as the zone from vegetation canopy to the lower limits of groundwater. This definition is nebulous in terms of the lower limit, and yet, defining the bottom of the Critical Zone is important if citizens are to embrace shale-gas development. This is because, although no peer-reviewed study has been presented that documents a case where hydraulic fracturing or formation fluids have migrated upwards from fracturing depths to drinking water resources, a few cases of such leakage have been alleged. On the other hand, many cases of methane migration into aquifers have been documented to occur and some have been attributed to shale-gas development. The Critical Zone science community has a role to play in understanding such contamination problems, how they unfold, and how they should be ameliorated. For example, one big effort of the Critical Zone science community is to promote sharing of data describing the environment. This data effort has been extended to provide data for citizens to understand water quality by a team known as the Shale Network. As scientists learn to publish data online, these efforts must also be made accessible to non-scientists. As citizens access the data, the demand for data will grow and all branches of government will eventually respond by providing more accessible data that will help the public and policy-makers make decisions.

  8. Adverse reproductive and developmental health outcomes following prenatal exposure to a 2 hydraulic fracturing chemical mixture in female C57Bl/6 mice

    Science.gov (United States)

    Kassotis, Christopher D.; Bromfield, John J.; Klemp, Kara C.; Meng, Chun-Xia; Wolfe, Andrew R.; Zoeller, Thomas; Balise, Victoria D.; Isiguzo, Chiamaka J.; Tillitt, Donald E.; Nagel, Susan C.

    2016-01-01

    Unconventional oil and gas operations using hydraulic fracturing can contaminate surface and groundwater with endocrine-disrupting chemicals. We have previously shown that 23 of 24 commonly used hydraulic fracturing chemicals can activate or inhibit the estrogen, androgen, glucocorticoid, progesterone, and/or thyroid receptors in a human endometrial cancer cell reporter gene assay and that mixtures can behave synergistically, additively, or antagonistically on these receptors. In the current study, pregnant female C57Bl/6 dams were exposed to a mixture of 23 commonly used unconventional oil and gas chemicals at approximately 3, 30, 300, and 3000 μg/kg·d, flutamide at 50 mg/kg·d, or a 0.2% ethanol control vehicle via their drinking water from gestational day 11 through birth. This prenatal exposure to oil and gas operation chemicals suppressed pituitary hormone concentrations across experimental groups (prolactin, LH, FSH, and others), increased body weights, altered uterine and ovary weights, increased heart weights and collagen deposition, disrupted folliculogenesis, and other adverse health effects. This work suggests potential adverse developmental and reproductive health outcomes in humans and animals exposed to these oil and gas operation chemicals, with adverse outcomes observed even in the lowest dose group tested, equivalent to concentrations reported in drinking water sources. These endpoints suggest potential impacts on fertility, as previously observed in the male siblings, which require careful assessment in future studies. - See more at: http://press.endocrine.org/doi/10.1210/en.2016-1242#sthash.9kqfLvXg.dpuf

  9. The analysis of antireflection range in coal seam hydraulic fracturing%本煤层水压致裂增透范围分析

    Institute of Scientific and Technical Information of China (English)

    赵源; 曹树刚; 李勇; 覃乐

    2015-01-01

    在理论分析水压致裂起裂机理和起裂方向的基础上,应用煤岩损伤破裂过程渗流-应力耦合分析系统,对5种不同地应力条件下的本煤层水压致裂过程进行模拟,得到了煤体的起裂方向、起裂压力和扩展压力.研究发现:侧压系数λ<1时,煤体基本沿垂直方向起裂,起裂压力和扩展压力呈逐步增长的趋势;λ>1 时,煤体的起裂方向为水平,起裂压力和扩展压力表现出平缓降低的趋势;在λ=1时,运用3种屈服准则进行了对比分析,得到了不同判别准则下的最小起裂水压.通过对λ=1.2时的受力状态进行深入分析,提出了压裂增透范围为宏观裂隙区、微裂隙贯通区、微裂隙产生区(受拉区)和原生裂隙扰动区(压应力恢复区)之和;利用数值图像处理得到的增透面积增长趋势符合二次函数的关系.%Based on the theoretical analysis of crack initiation mechanism and crack direction of hy-draulic fracturing, the hydraulic fracturing process of coal seam under five different in-situ stress situa-tions has been simulated by using the seepage-stress coupling analysis system of coal and/or rock dam-age & fracture process, and hence, the crack initiation direction, initial pressure and expansion pressure have been obtained. Studies have found that, the crack direction is vertical, with the initial pressure as well as the expansion pressure presenting as gradual increasing trend when the lateral pressure coeffi-cientλ<1. When the lateral pressure coefficientλ>1, the crack direction is horizontal, with the initial pressure and the expansion pressure presenting as gradually decreasing trend. When the lateral pressure coefficientλ=1, by carrying out three different kinds of yield criterion contrastive analysis, the minimum initial pressure are respectively obtained under the different kinds of yield criterion. Through the further stress analysis, i.e., when coefficientλ=1.2, studies have proposed

  10. XFEM-Based CZM for the Simulation of 3D Multiple-Cluster Hydraulic Fracturing in Quasi-Brittle Shale Formations

    Science.gov (United States)

    Haddad, Mahdi; Sepehrnoori, Kamy

    2016-12-01

    The cohesive zone model (CZM) honors the softening effects and plastic zone at the fracture tip in a quasi-brittle rock, e.g., shale, which results in a more precise fracture geometry and pumping pressure compared to those from linear elastic fracture mechanics. Nevertheless, this model, namely the planar CZM, assumes a predefined surface on which the fractures propagate and therefore restricts the fracture propagation direction. Notably, this direction depends on the stress interactions between closely spaced fractures and can be acquired by integrating CZM as the segmental contact interaction model with a fully coupled pore pressure-displacement model based on extended finite element method (XFEM). This integrated model, called XFEM-based CZM, simulates the fracture initiation and propagation along an arbitrary, solution-dependent path. In this work, we modeled a single stage of 3D hydraulic fracturing initiating from three perforation clusters in a single-layer, quasi-brittle shale formation using planar CZM and XFEM-based CZM including slit flow and poroelasticity for fracture and matrix spaces, respectively, in Abaqus. We restricted the XFEM enrichment zones to the stimulation regions as enriching the whole domain leads to extremely high computational expenses and unrealistic fracture growths around sharp edges. Moreover, we validated our numerical technique by comparing the solution for a single fracture with KGD solution and demonstrated several precautionary measures in using XFEM in Abaqus for faster solution convergence, for instance the initial fracture length and mesh refinement. We demonstrated the significance of the injection rate and stress contrast in fracture aperture, injection pressure, and the propagation direction. Moreover, we showed the effect of the stress distribution on fracture propagation direction comparing the triple-cluster fracturing results from planar CZM with those from XFEM-based CZM. We found that the stress shadowing effect of

  11. XFEM-Based CZM for the Simulation of 3D Multiple-Stage Hydraulic Fracturing in Quasi-brittle Shale Formations

    Science.gov (United States)

    Haddad, M.; Sepehrnoori, K.

    2015-12-01

    The Cohesive Zone Model (CZM) engages the plastic zone and softening effects at the fracture tip in a quasi-brittle rock, e.g. shale, which concludes a more precise fracture geometry and pumping pressure compared to those from Linear Elastic Fracture Mechanics. Nevertheless, this model, namely planar CZM, assumes a predefined surface on which the fractures propagate and therefore, restricts the fracture propagation direction. Notably, this direction depends on the stress interactions between closely spaced fractures and can be acquired integrating CZM as the segmental contact interaction model with a fully coupled pore pressure-displacement, extended finite element model (XFEM). This later model simulates the fracture initiation and propagation along an arbitrary, solution-dependent path. In this work, we modeled double- and triple-cluster 3D hydraulic fracturing in a single-layer, quasi-brittle shale formation using planar CZM and XFEM-based CZM including slit flow and poro-elasticity for fracture and matrix spaces, respectively, in Abaqus. Our fully-coupled pore pressure-stress Geomechanics model includes leak-off as a continuum-based fluid flow component coupled with the other unknowns in the problem. Having compared the triple-cluster fracturing results from planar CZM with those from XFEM-based CZM, we found that the stress shadowing effect of multiple hydraulic fractures on each other can cause these fractures to rationally propagate out of plane; this also demonstrates the advantages of the second method compared to the first one. We investigated the effect of this arbitrary propagation direction on not only the fractures' length, aperture, and the required injection pressure, but also fractures' connection to the wellbore. Depending on the spacing and the number of clusters per stage, this connection can be gradually disrupted with time due to the near-wellbore fracture closure which may embed proppant particles on the fracture wall, or screen out the

  12. Comparison between genetic fuzzy system and neuro fuzzy system to select oil wells for hydraulic fracturing; Comparacao entre genetic fuzzy system e neuro fuzzy system para selecao de pocos de petroleo para fraturamento hidraulico

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Antonio Orestes de Salvo [PETROBRAS, Rio de Janeiro, RJ (Brazil); Ferreira Filho, Virgilio Jose Martins [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)

    2004-07-01

    The hydraulic fracture operation is wide used to increase the oil wells production and to reduce formation damage. Reservoir studies and engineer analysis are made to select the wells for this kind of operation. As the reservoir parameters have some diffuses characteristics, Fuzzy Inference Systems (SIF) have been tested for this selection processes in the last few years. This paper compares the performance of a neuro fuzzy system and a genetic fuzzy system used for hydraulic Fracture well selection, with knowledge acquisition from an operational data base to set the SIF membership functions. The training data and the validation data used were the same for both systems. We concluded that, in despite of the genetic fuzzy system would be a younger process, it got better results than the neuro fuzzy system. Another conclusion was that, as the genetic fuzzy system can work with constraints, the membership functions setting kept the consistency of variables linguistic values. (author)

  13. Determination and maintenance of DE minimis risk for migration of residual tritium (3H) from the 1969 Project Rulison nuclear test to nearby hydraulically fractured natural gas wells.

    Science.gov (United States)

    Daniels, Jeffrey I; Chapman, Jenny B

    2013-05-01

    The Project Rulison underground nuclear test was a proof-of-concept experiment that was conducted under the Plowshare Program in 1969 in the Williams Fork Formation of the Piceance Basin in west-central Colorado. Today, commercial production of natural gas is possible from low permeability, natural gas bearing formations like that of the Williams Fork Formation using modern hydraulic fracturing techniques. With natural gas exploration and production active in the Project Rulison area, this human health risk assessment was performed in order to add a human health perspective for site stewardship. Tritium (H) is the radionuclide of concern with respect to potential induced migration from the test cavity leading to subsequent exposure during gas-flaring activities. This analysis assumes gas flaring would occur for up to 30 d and produce atmospheric H activity concentrations either as low as 2.2 × 10 Bq m (6 × 10 pCi m) from the minimum detectable activity concentration in produced water or as high as 20.7 Bq m (560 pCi m), which equals the highest atmospheric measurement reported during gas-flaring operations conducted at the time of Project Rulison. The lifetime morbidity (fatal and nonfatal) cancer risks calculated for adults (residents and workers) and children (residents) from inhalation and dermal exposures to such activity concentrations are all below 1 × 10 and considered de minimis. The implications for monitoring production water for conforming health-protective, risk-based action levels also are examined.

  14. Monitoring the interaction of hydraulic fracturing fluid with Marcellus Shale using Sr isotopes: a comparison of laboratory experiments with field scale observations (Invited)

    Science.gov (United States)

    Wall, A. J.; Hakala, A.; Marcon, V.; Joseph, C.

    2013-12-01

    Strontium isotopes have the potential to be an effective tool for differentiating Marcellus Shale derived-fluids from other sources in surface and ground waters (Chapman et al. 2012, doi: 10.1021/es204005g). Water that is co-produced during gas extraction is likely influenced by fluid/rock interactions during hydraulic fracturing (HF) and monitoring changes in Sr isotope ratios can provide insight into reactions occurring within the shale formation. However, questions persist as to what controls the Sr isotopic composition of Marcellus Shale fluids, especially during HF. Here we compare laboratory experiments, simulating the dissolution of the Marcellus Shale during HF, with a time-series of water samples taken from a Marcellus Shale gas wells after HF has occurred. For the laboratory experiments, a core sample of Marcellus Shale from Greene County, PA was crushed and placed into a high P and T reaction vessel. Solutions were added in two different experiments: one with synthetic brine, and another using brine+HF fluid. The HF fluid was made up of components listed on fracfocus.org. Experiments were run for ~16 days at 27.5 MPa and 130oC. Aqueous samples were periodically removed for analysis and Sr isotope ratios were measured by MC-ICP-MS. Using just brine, the pH of the solution decreased from 7.6 to 5.3 after 24 hrs, then reached a steady state at ~6.1. Sr/Ca molar ratios in the fluid started at 2.3 after 24 hours and decreased to 1.8 over ~16 days. During this time only 6% of the total inorganic carbon (TIC) dissolved from the shale. The ɛSr values started at +43.2 and decreased to +42.4. In the experiment using brine+HF fluid, the pH started at 1.8 and rose slowly to a steady value of 5.6 by day 6. The Sr and Ca concentrations were higher than the brine experiment, but the Sr/Ca ratios remained lower at ~0.3 through the experiment. The increased Ca release, as well as the dissolution of over 60% of the TIC, suggests the dissolution of a carbonate mineral

  15. Potential impact of flowback water from hydraulic fracturing on agricultural soil quality: Metal/metalloid bioaccessibility, Microtox bioassay, and enzyme activities.

    Science.gov (United States)

    Chen, Season S; Sun, Yuqing; Tsang, Daniel C W; Graham, Nigel J D; Ok, Yong Sik; Feng, Yujie; Li, Xiang-Dong

    2017-02-01

    Hydraulic fracturing has advanced the development of shale gas extraction, while inadvertent spills of flowback water may pose a risk to the surrounding environment due to its high salt content, metals/metalloids (As, Se, Fe and Sr), and organic additives. This study investigated the potential impact of flowback water on four representative soils from shale gas regions in Northeast China using synthetic flowback solutions. The compositions of the solutions were representative of flowback water arising at different stages after fracturing well establishment. The effects of solution composition of flowback water on soil ecosystem were assessed in terms of metal mobility and bioaccessibility, as well as biological endpoints using Microtox bioassay (Vibrio fischeri) and enzyme activity tests. After one-month artificial aging of the soils with various flowback solutions, the mobility and bioaccessibility of As(V) and Se(VI) decreased as the ionic strength of the flowback solutions increased. The results inferred a stronger binding affinity of As(V) and Se(VI) with the soils. Nevertheless, the soil toxicity to Vibrio fischeri only presented a moderate increase after aging, while dehydrogenase and phosphomonoesterase activities were significantly suppressed with increasing ionic strength of flowback solutions. On the contrary, polyacrylamide in the flowback solutions led to higher dehydrogenase activity. These results indicated that soil enzyme activities were sensitive to the composition of flowback solutions. A preliminary human health risk assessment related to As(V) suggested a low level of cancer risk through exposure via ingestion, while holistic assessment of environmental implications is required.

  16. Seismic hydraulic fracture migration originated by successive deep magma pulses: The 2011-2013 seismic series associated to the volcanic activity of El Hierro Island

    Science.gov (United States)

    Díaz-Moreno, A.; Ibáñez, J. M.; De Angelis, S.; García-Yeguas, A.; Prudencio, J.; Morales, J.; Tuvè, T.; García, L.

    2015-11-01

    In this manuscript we present a new interpretation of the seismic series that accompanied eruptive activity off the coast of El Hierro, Canary Islands, during 2011-2013. We estimated temporal variations of the Gutenberg-Richter b value throughout the period of analysis, and performed high-precision relocations of the preeruptive and syneruptive seismicity using a realistic 3-D velocity model. Our results suggest that eruptive activity and the accompanying seismicity were caused by repeated injections of magma from the mantle into the lower crust. These magma pulses occurred within a small and well-defined volume resulting in the emplacement of fresh magma along the crust-mantle boundary underneath El Hierro. We analyzed the distribution of earthquake hypocenters in time and space in order to assess seismic diffusivity in the lower crust. Our results suggest that very high earthquake rates underneath El Hierro represent the response of a stable lower crust to stress perturbations with pulsatory character, linked to the injection of magma from the mantle. Magma input from depth caused large stress perturbations to propagate into the lower crust generating energetic seismic swarms. The absence of any preferential alignment in the spatial pattern of seismicity reinforces our hypothesis that stress perturbation and related seismicity, had diffusive character. We conclude that the temporal and spatial evolution of seismicity was neither tracking the path of magma migration nor it defines the boundaries of magma storage volumes such as a midcrustal sill. Our conceptual model considers pulsatory magma injection from the upper mantle and its propagation along the Moho. We suggest, within this framework, that the spatial and temporal distributions of earthquake hypocenters reflect hydraulic fracturing processes associated with stress propagation due to magma movement.

  17. Future Water Management in the South Platte River Basin: Impacts of Hydraulic Fracturing, Population, Agriculture, and Climate Change in a Semi-Arid Region.

    Science.gov (United States)

    Walker, E. L.; Hogue, T. S.; Anderson, A. M.; Read, L.

    2015-12-01

    In semi-arid basins across the world, the gap between water supply and demand is growing due to climate change, population growth, and shifts in agriculture and unconventional energy development. Water conservation efforts among residential and industrial water users, recycling and reuse techniques and innovative regulatory frameworks for water management strive to mitigate this gap, however, the extent of these strategies are often difficult to quantify and not included in modeling water allocations. Decision support systems (DSS) are purposeful for supporting water managers in making informed decisions when competing demands create the need to optimize water allocation between sectors. One region of particular interest is the semi-arid region of the South Platte River basin in northeastern Colorado, where anthropogenic and climatic effects are expected to increase the gap between water supply and demand in the near future. Specifically, water use in the South Platte is impacted by several high-intensity activities, including unconventional energy development, i.e. hydraulic fracturing, and large withdrawals for agriculture; these demands are in addition to a projected population increase of 100% by 2050. The current work describes the development of a DSS for the South Platte River basin, using the Water Evaluation and Planning system software (WEAP) to explore scenarios of how variation in future water use in the energy, agriculture, and municipal sectors will impact water allocation decisions. Detailed data collected on oil and gas water use in the Niobrara shale play will be utilized to predict future sector use. We also employ downscaled climate projections for the region to quantify the potential range of water availability in the basin under each scenario, and observe whether or not, and to what extent, climate may impact management decisions at the basin level.

  18. Making Knowledge from Numbers : The Shale Network as an Honest Broker for Evaluating and Educating about the Impacts of Hydraulic Fracturing in the Marcellus Shale Region

    Science.gov (United States)

    Pollak, J.; Brantley, S.; Williams, J.; Dykhoff, S.; Brazil, L. I.

    2015-12-01

    The Marcellus Shale Network is an NSF-funded project that investigates the impacts of hydraulic fracturing for shale gas development on water resources in and around the state of Pennsylvania. It is a collaborative effort that aims to be an honest broker in the shale gas conversation by involving multiple entities (including universities, government agencies, industry groups, nonprofits, etc.) to collect, analyze, and disseminate data that describe the past and current conditions of water in the Marcellus shale region. A critical component of this project has been to engage multiple types of stakeholders - academia, government agencies, industry, and citizen science groups - in annual workshops to present and discuss how to ensure the integrity of water resources in light of the challenges that natural gas extraction can present. Each workshop has included a hands-on activity that allows participants to access water quality data using the tools provided by the CUAHSI Water Data Center. One of these tools is HydroDesktop, which is an open source GIS application that can be used in formal and informal education settings as a geoscience research tool. In addition to being a GIS, HydroDesktop accesses CUAHSI's large catalog of water data thus enabling students, professional researchers, and citizen scientists to discover data that can expand the understanding of water quality issues in one's local environment and beyond. This presentation will highlight the goals of the Shale Network project and the stakeholders involved in addition to how cyberinfrastructure is being used to create a democratic, data-driven conversation about the relationship between energy production from shale gas and our water resources.

  19. The Impacts of Hydraulic Fracturing in the Eagle Ford Shale Region, South Texas: Hands-On Activities for Middle and High School Students

    Science.gov (United States)

    Kohlmeyer, C.; Loisel, J.; Schade, G. W.

    2016-12-01

    The Eagle Ford Shale (EFS) region of south-central Texas is strongly affected by a rapid increase in unconventional oil and gas production, and it ranks amongst the top production regions of the country. Across the EFS region and elsewhere, the fracking boom has been causing large emissions of methane (CH4) and non-methane hydrocarbons to the atmosphere, with direct consequences on atmospheric GHG concentration and air quality. An increase in seismic activity has also been reported in the area. Since these effects were initially underestimated, fracking operations remain largely unmitigated by regulation. As a result, large-scale oil and gas operations are found in close geographical proximity to rural communities who are uninformed and/or not accustomed to such operations and their effects on the environment and human health. Here we present a few hands-on activities that are being developed to educate middle and high school students on hydraulic fracturing and associated land-use change, water and air pollution, and seismicity induced by deep well injection. Modules on the carbon cycle (with an emphasis on CO2 and CH4), global environmental change, and human energy consumption around the world and main energy sources are also under development. Each activity is either based on scientific data gathered by students or information that is freely available; mapping exercises and time series analysis are included. For example, students will implement a geographic information system (GIS) to study local land-use change using satellite imagery analysis. These activities will be implemented in Fall 2016 and Spring 2017 in at least one Independent School District of the Eagle Ford Shale area. A broadly applicable educational booklet/teaching module on atmospheric CH4 emissions, with an emphasis on the environmental impacts of the oil and gas industry as the dominant source of emissions and land use change in shale areas, will be published.

  20. Research of the hydraulic fracture in fuxian mesozoic reservoir%富县探区中生界油藏储层压裂裂缝形态研究

    Institute of Scientific and Technical Information of China (English)

    周荣萍; 秦玉英; 陶长州; 李俊杰; 张林

    2012-01-01

    The characteristic of the hydraulic fractures is the first question of fracturing design. The buried depth of Mesozoic reservoir of Fuxian block is easy,strech is wide(300- 1100 metres),three-dimensional stress of the reservoir alters much and the characteristic of the hydraulic fractures is complex.Through comprehensive analysis on the regional tectonic characteristics,geostress,tensile strength of rock,instantaneous shut -in pressure,net pressure within seam and rock lateral heterogeneity,it is found that the hydraulic fractures are mostly horizon,vertica and high angle oblique fracture are also availability,and fracture in the extension process also can change direction.%水力压裂裂缝形态是油层压裂设计首先要考虑的问题针对中原油田富县探区中生界油藏储层埋藏深度浅,跨度大(300~1100 m),储层三向地应力变化大,压裂裂缝形态复杂的情况,通过对区域构造特征、岩芯地应力、岩石抗张强度、瞬时停泵压力、压裂时缝内净压力、岩石横向非均质性等综合分析,得出该区人工裂缝以水平缝为主,垂直缝及高角度斜交缝也有可能存在,而且人工裂缝在延伸过程中还可能发生转向。

  1. Establish and Application on Prediction Model About Permeability of Coal Reservoir After Hydraulic Fracture%煤储层水力压裂后渗透率预测模型建立及应用

    Institute of Scientific and Technical Information of China (English)

    倪小明; 李哲远; 王延斌

    2014-01-01

    In order to obtain the permeability of the coal reservoir after hydraulic fracture,based on the pressure curve of the hydraulic fracturing and the principle of testing permeability by injection/ fall-off well-test,the prediction model about the permeability of the coal reservoir after hydraulic fracture was established.According to the data of the exploration and development about coalbed methane in Panzhuang Block of Jincheng Mine Area and in Encun Block of Jiaozuo Mine Area,the accuracy and effectiveness of the model was verified.The results showed that the proportion of III and IV class in the coal seam section and whether connecting the anomaly structure belt after hydraulic fracturing were important influence on the accuracy of the prediction results.When the proportion of III and IV class in the coal seam section was small,the fracturing could easily form in the hard coal,the prediction results were accurate.When the proportion of III and IV class in the coal seam section was larger,the fracturing fluid could easily flow in the coal particles and coal particles,the prediction results could not reflect the fracturing effect.%为得到煤储层水力压裂后的渗透率,基于水力压裂施工曲线和注入/压降试井测试渗透率原理,建立了水力压裂后渗透率预测模型。根据晋城矿区潘庄区块和焦作矿区恩村区块煤层气的勘探开发资料,验证了模型的准确性和有效性。结果表明:III、IV 类煤体所占比例、压裂后裂缝是否连通构造异常带对预测结果的准确性影响较大;III、IV 类煤体比例比较小时,压裂液容易在硬煤中形成裂缝,预测结果较准确;当 III、IV 类煤体比例较大时,压裂液容易在煤粒间流动,预测结果不能真实反映压裂效果。

  2. 沥青混凝土心墙坝水力劈裂发生机理及分析%Mechanism and analysis of occurrence of hydraulic fracturing for asphalt concrete core dam

    Institute of Scientific and Technical Information of China (English)

    邓建伟; 凤炜; 何建新

    2014-01-01

    The influence of hydraulic fracturing problem of soil core wall dam on the safety of embank-ment dam has been paid great attention in engineering field.This paper analyzed the mechanism that hy-draulic fracturing occurs in asphalt concrete core wall, and proposed that the horizontal seam produced in construction of compacted core wall's caused by “pine cone effect” and the low permeability of asphalt concrete are the important material conditions of hydraulic fracturing, while the“arch effect” and power-ful “water wedge effect” produced by transition material and core wall interactions are the hydraulic frac-ture mechanics conditions.The analysis of examples proved that the soil core wall and the asphalt con-crete core wall all exist the risk of hydraulic fracturing,which need to pay close attention in the field of water conservancy sector.It noted that high asphalt concrete core wall dam should be carefully studied and the core wall's impervious safety and reliability be evaluated.The result has a certain reference value for the design and construction of asphalt concrete core wall dam.%土质心墙坝的水力劈裂问题对土石坝安全的影响已引起工程界的高度重视。本文分析了沥青混凝土心墙发生水力劈裂的机理,提出心墙碾压施工“松塔效应”产生的水平缝和沥青混凝土的低透水性是发生水力劈裂的重要物质条件,而过渡料与心墙相互作用产生的“拱效应”及强大的“水楔”作用是发生水力劈裂的力学条件。通过实例分析证明沥青混凝土防渗心墙与土质心墙一样也存在水力劈裂的风险,需引起水利界的高度重视,对于高沥青混凝土心墙坝应审慎研究并评价心墙的防渗安全可靠性。分析结果对沥青混凝土心墙坝的设计与施工有一定参考意义。

  3. Intermediate-depth icequakes and harmonic tremor in an Alpine glacier (Glacier d'Argentière, France): Evidence for hydraulic fracturing?

    Science.gov (United States)

    Helmstetter, Agnès.; Moreau, Luc; Nicolas, Barbara; Comon, Pierre; Gay, Michel

    2015-03-01

    28 April coincides with a burst of deep icequakes. These events appear to be associated with the propagation of fractures, which can explain the decrease in the resonance frequency. Finally, we observed an acceleration of glacier flow on 29 April, suggesting that meltwater had reached the ice/bed interface. These observations suggest that deep icequakes are due to hydraulic fracturing and that they can be used to track fluid flow inside glaciers.

  4. Hydraulic fracture during epithelial stretching

    Science.gov (United States)

    Casares, Laura; Vincent, Romaric; Zalvidea, Dobryna; Campillo, Noelia; Navajas, Daniel; Arroyo, Marino; Trepat, Xavier

    2015-03-01

    The origin of fracture in epithelial cell sheets subject to stretch is commonly attributed to excess tension in the cells’ cytoskeleton, in the plasma membrane, or in cell-cell contacts. Here, we demonstrate that for a variety of synthetic and physiological hydrogel substrates the formation of epithelial cracks is caused by tissue stretching independently of epithelial tension. We show that the origin of the cracks is hydraulic; they result from a transient pressure build-up in the substrate during stretch and compression manoeuvres. After pressure equilibration, cracks heal readily through actomyosin-dependent mechanisms. The observed phenomenology is captured by the theory of poroelasticity, which predicts the size and healing dynamics of epithelial cracks as a function of the stiffness, geometry and composition of the hydrogel substrate. Our findings demonstrate that epithelial integrity is determined in a tension-independent manner by the coupling between tissue stretching and matrix hydraulics.

  5. Maximizing Storage Rate and Capacity and Insuring the Environmental Integrity of Carbon Dioxide Sequestration in Geological Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    L.A. Davis; A.L. Graham; H.W. Parker; J.R. Abbott; M.S. Ingber; A.A. Mammoli; L.A. Mondy; Quanxin Guo; Ahmed Abou-Sayed

    2005-12-07

    Maximizing Storage Rate and Capacity and Insuring the Environmental Integrity of Carbon Dioxide Sequestration in Geological Formations The U.S. and other countries may enter into an agreement that will require a significant reduction in CO2 emissions in the medium to long term. In order to achieve such goals without drastic reductions in fossil fuel usage, CO2 must be removed from the atmosphere and be stored in acceptable reservoirs. The research outlined in this proposal deals with developing a methodology to determine the suitability of a particular geologic formation for the long-term storage of CO2 and technologies for the economical transfer and storage of CO2 in these formations. A novel well-logging technique using nuclear-magnetic resonance (NMR) will be developed to characterize the geologic formation including the integrity and quality of the reservoir seal (cap rock). Well-logging using NMR does not require coring, and hence, can be performed much more quickly and efficiently. The key element in the economical transfer and storage of the CO2 is hydraulic fracturing the formation to achieve greater lateral spreads and higher throughputs of CO2. Transport, compression, and drilling represent the main costs in CO2 sequestration. The combination of well-logging and hydraulic fracturing has the potential of minimizing these costs. It is possible through hydraulic fracturing to reduce the number of injection wells by an order of magnitude. Many issues will be addressed as part of the proposed research to maximize the storage rate and capacity and insure the environmental integrity of CO2 sequestration in geological formations. First, correlations between formation properties and NMR relaxation times will be firmly established. A detailed experimental program will be conducted to determine these correlations. Second, improved hydraulic fracturing models will be developed which are suitable for CO2 sequestration as opposed to enhanced oil recovery (EOR

  6. Anisotropic and heterogeneous mechanical properties of a stratified shale/limestone sequence at Nash Point, South Wales: A case study for hydraulic fracture propagation through a layered medium

    Science.gov (United States)

    Forbes Inskip, Nathaniel; Meredith, Philip; Gudmundsson, Agust

    2016-04-01

    While considerable effort has been expended on the study of fracture propagation in rocks in recent years, our understanding of how fractures propagate through layered sedimentary rocks with different mechanical and elastic properties remains poorly constrained. Yet this is a key issue controlling the propagation of both natural and anthropogenic hydraulic fractures in layered sequences. Here we report measurements of the contrasting mechanical and elastic properties of the Lower Lias at Nash Point, South Wales, which comprises an interbedded sequence of shale and limestone layers, and how those properties may influence fracture propagation. Elastic properties of both materials have been characterised via ultrasonic wave velocity measurements as a function of azimuth on samples cored both normal and parallel to bedding. The shale is highly anisotropic, with P-wave velocities varying from 2231 to 3890 m s-1, giving an anisotropy of ~55%. By contrast, the limestone is essentially isotropic, with a mean P-wave velocity of 5828 m s-1 and an anisotropy of ~2%. The dynamic Young's modulus of the shale, calculated from P- and S-wave velocity data, is also anisotropic with a value of 36 GPa parallel to bedding and 12 GPa normal to bedding. The modulus of the limestone is again isotropic with a value of 80 GPa. It follows that for a vertical fracture propagating (i.e. normal to bedding) the modulus contrast is 6.6. This is important because the contrast in elastic properties is a key factor in controlling whether fractures arrest, deflect, or propagate across interfaces between layers in a sequence. There are three principal mechanisms by which a fracture may deflect across or along an interface, namely: Cook-Gordon debonding, stress barrier, and elastic mismatch. Preliminary numerical modelling results (using a Finite Element Modelling software) of induced fractures at Nash Point suggest that all three are important. The results demonstrate a rotation of the maximum

  7. 煤岩体水力致裂理论及其工艺技术框架%Hydraulic Fracturing Theory of Coal-Rock Mass and Its Technical Framework

    Institute of Scientific and Technical Information of China (English)

    黄炳香; 程庆迎; 刘长友; 魏民涛; 付军辉

    2011-01-01

    The structure transform of coal-rock mass is an universal scientific issue for solving many technical problems in coal mine.Hydraulic fracturing is an effective method to transform the coal-rock structure.Aiming at this issue, we analyzed the structure and physico-mechanical properties of coal-rock mass and the hydraulic crack propagation and physical chemistry effect of hydraulic fracturing of coal-rock mass.On this basis, we propose the corresponding hydraulic fracturing control technology and analyze its application in coal mine.The internal structure of coal is composed by four-stage spatial structure system which comprises crack-cleat and stratification-micro fissure-pore.The soft texture of coal, the effect of gas adsorption analysis,the development of natural fractures, and other factors make the hydraulic fracturing of rockmass complicated.In order to meet the structural transformation, strength decrease, permeability increase, and other engineering needs, the process of hydraulic fracturing for coal rock mass is from the propagation of main hydraulic cracks, the propagation of airfoil branch fissures propagation, and water absorption wetting.The focuses of these three effects are different on different projects.Directional fracturing technology with beforehand hydraulic slotting has been proposed.The weakening strength and increasing permeability technology of hydraulic blasting fracturing has been put forward.The experimental results have proved that the hydraulic fracturing, after water pressure control blasting, is an efficient way to increase the number and range of hydraulic cracks.Hydraulic fracturing of coal-rock mass can be used to control hard roof, to weaken the hard top coal, to transfer the stress directionally, to release the local concentrated stress, to weaken the strength and shock, to increase the permeability of gas-filled coal seam, and to prevent coal-gas from outbursting, and so on,.%煤岩体结构改造是解决煤矿许多技术难

  8. 页岩水力压裂中多簇裂缝扩展的全耦合模拟%Fully coupled modeling for multiple clusters growth of hydraulic fractures in shale

    Institute of Scientific and Technical Information of China (English)

    曾庆磊; 庄茁; 柳占立; 王涛; 高岳

    2016-01-01

    水平井和水力压裂是页岩气开发中的关键技术。对水力压裂中多簇裂缝同时扩展的物理过程进行了数值模拟。采用扩展有限元法(XFEM)模拟岩石中裂缝沿着任意路径扩展,采用有限体积法(FVM)模拟裂缝中流体的流动,并且考虑井筒中流体流动以及在各簇裂缝间的流量动态分配。通过牛顿迭代对全耦合物理过程进行数值求解,重点研究了初始长度不同的两条裂缝的扩展过程,证明较大的射孔摩阻能促进两条裂缝的同时扩展。并通过算例证明了本方法的精度和有效性。%Hydraulic fracturing in the horizontal wellbore is an effective technique in the development of shale gas.In this paper,the growth of multiple hydraulic fractures clusters is simulated numerically.The extended finite element method (XFEM)is adopted to model arbitrary propagation of the fractures in shale rock and the finite volume method (FVM)is used to discretize fluid flow in the fractures.The flow in horizontal wellbore and the dynamic distribution of the flow into different fracture clusters are consi-dered.The fully coupled field equations are solved by Newton iteration.Numerical examples are pre-sented to validate the accuracy and efficiency of the method.The propagation paths of two hydraulic fractures are modeled to demonstrate that the larger perforation entry friction can promote simultaneous growth of multiple fracture clusters.

  9. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20072338 Bai Long(Guizhou Academy of Geology Survey,Guiyang,Guizhou 550005,China);Zhang Zhen Treatment of Discovery on Ductile Shear Belts in Yiwu,Xingjiang Province and Its Ore-Forming Geology Process(Guizhou Geology,ISSN1000-5943,CN52-1059/P,23(4),2006,p.286-291,295,3 illus.,9 refs.)Key words:ductile shear zones,metallogenesis,XinjiangOf ductile shear belts,deformation fabric considerably developed in Yiwu,

  10. Modeling of fault activation and seismicity by injection directly into a fault zone associated with hydraulic fracturing of shale-gas reservoirs

    Science.gov (United States)

    LBNL, in consultation with the EPA, expanded upon a previous study by injecting directly into a 3D representation of a hypothetical fault zone located in the geologic units between the shale-gas reservoir and the drinking water aquifer.

  11. 煤矿井下穿层水力压裂钻孔布置优化分析及应用%Optimization Analysis on Hydraulic Fracturing Crossing Borehole Layout and Its Application in Coal Mine

    Institute of Scientific and Technical Information of China (English)

    李栋; 郭臣业; 覃乐; 黄昌文; 唐育德; 周小林

    2015-01-01

    为解决重庆地区低透气性松软煤层瓦斯抽采的难题,提出煤矿井下穿层水力压裂技术,分析得出其增透主要是高压水在煤体裂隙尖端产生拉应力增高区促使原始裂隙扩展、次生裂隙形成的过程,借助数值模拟对不同孔距的穿层水力压裂煤体塑性破坏区随注入高压水压力的变化规律进行研究,得到重庆逢春煤矿7号煤层起裂压力为33~35 MPa,而延伸压力略低于起裂压力,拟合出不同孔径下水力压裂有效范围与注入高压水压力的指数曲线,并将研究成果应用于该矿底板巷瓦斯抽采工程. 结果表明:水力压裂后煤层在走向、倾向上单孔压裂有效范围分别达到60 m和50 m,煤层透气性系数提高195~370倍,瓦斯抽采纯量提高3. 5倍,瓦斯抽采浓度提高5倍.%To resolve the problem of gas drainage difficulty in soft coal seam with low permeability in Chongqing area, a new technology by hydraulic fracturing across coal seams was proposed, it was concluded from the analysis that the process of the permeability enhancement included the original crack expansion and the secondary crack formation in the tensile stress concentration area produced at the crack tip. Study was made on the variation law of the plastic failure zone of the coal body by hydraulic fracturing across seams with the pressure of the injected high-pressure water with the help of numerical simulation. It was found that the fracture initiation pressure of No. 7 coal seam in Fengchun Coal Mine was 33 ~35 MPa and the extension pressure was slightly lower than the initiation pressure. The exponential curve of the hydraulic fracturing radius and the injection pressure was fitted out, which was applied to gas pre-drainage engineering in a floor roadway. The application results showed that the effective range of hydraulic fracturing along the strike and inclination respectively reached 60 m and 50 m, the permeability of coal seam raised by 195 ~370 times

  12. THE TREATMENT TECHNOLOGIES OF HYDRAULIC FRACTURING FLUID FLOWBACK OF SHALE GAS%页岩气压裂返排液处理技术

    Institute of Scientific and Technical Information of China (English)

    耿翠玉; 乔瑞平; 陈广升; 俞彬; 李海洋; 王洋; 徐大伟; 杨曙光; 田媛

    2016-01-01

    本文主要概述了页岩气压裂返排液的水质特点以及国内外最新的页岩气压裂返排液处理技术进展.针对处理后的压裂返排液的不同去向,介绍了几种循环回用或达标外排的页岩气压裂返排液的处理工艺,并阐述了博天环境创新的页岩气压裂返排液无害化处理技术.指出“强化混凝+高级氧化+生物氧化+消毒”组合工艺将成为页岩气压裂返排液处理技术的发展方向.

  13. Optimizing Fracture Treatments in a Mississippian "Chat" Reservoir, South-Central Kansas

    Energy Technology Data Exchange (ETDEWEB)

    K. David Newell; Saibal Bhattacharya; Alan Byrnes; W. Lynn Watney; Willard Guy

    2005-10-01

    This project is a collaboration of Woolsey Petroleum Corporation (a small independent operator) and the Kansas Geological Survey. The project will investigate geologic and engineering factors critical for designing hydraulic fracture treatments in Mississippian ''chat'' reservoirs. Mississippian reservoirs, including the chat, account for 159 million m3 (1 billion barrels) of the cumulative oil produced in Kansas. Mississippian reservoirs presently represent {approx}40% of the state's 5.6*106m3 (35 million barrels) annual production. Although geographically widespread, the ''chat'' is a heterogeneous reservoir composed of chert, cherty dolomite, and argillaceous limestone. Fractured chert with micro-moldic porosity is the best reservoir in this 18- to 30-m-thick (60- to 100-ft) unit. The chat will be cored in an infill well in the Medicine Lodge North field (417,638 m3 [2,626,858 bbls] oil; 217,811,000 m3 [7,692,010 mcf] gas cumulative production; discovered 1954). The core and modern wireline logs will provide geological and petrophysical data for designing a fracture treatment. Optimum hydraulic fracturing design is poorly defined in the chat, with poor correlation of treatment size to production increase. To establish new geologic and petrophysical guidelines for these treatments, data from core petrophysics, wireline logs, and oil-field maps will be input to a fracture-treatment simulation program. Parameters will be established for optimal size of the treatment and geologic characteristics of the predicted fracturing. The fracturing will be performed and subsequent wellsite tests will ascertain the results for comparison to predictions. A reservoir simulation program will then predict the rate and volumetric increase in production. Comparison of the predicted increase in production with that of reality, and the hypothetical fracturing behavior of the reservoir with that of its actual behavior, will serve as tests of

  14. HYDRAULIC FRACTURE PROPAGATION IN SHALE GAS BEDDING RESERVOIR ANALYTICAL ANALYSIS%含层理页岩气藏水力压裂裂纹扩展规律解析分析

    Institute of Scientific and Technical Information of China (English)

    孙可明; 张树翠

    2016-01-01

    Shale gas deposits in shale reservoirs, whose bedding structures are different from conventional heterogeneous reservoirs. This also makes the shale reservoirs have different crack propagation laws in hydraulic fracturing. In order to investigate the crack propagation laws of shale reservoir hydraulic fracturing, complex variable function and conformal transformation is adopted here to deduce the solutions of crack tip stress concentration. The fracture propagation criteri-ons have been put forward when the perpendicular to the minimum in-situ stress hydraulic fracture meets oblique bedding by considering shale reservoirs heterogeneity as well as strength anisotropy and then comparing fluid pressure satisfied fracture propagation in all directions. In order to show how difficult the hydraulic fracture turning to bedding, the critical strength ratios of bedding and rock mass are defined respectively when the fracture just initiates in bedding and propagates along bedding. Based on these two critical strength ratios, the bedding strength range which fracture initiates in bedding and propagates along bedding can be obtained. Analytical analysis show as follows:the critical strength ratio of bedding crack initiation increases with the decrease of bedding strike angle and dip angle and the increase of min-principal stress and the rock strength. The critical strength ratio of bedding crack initiation increases when the max-principal stress de-creases and the middle-principal stress increase if the strike angle is less than 35.26◦. Otherwise the critical strength ratio of bedding crack initiation decreases when the max-principal stress decreases and the middle-principal stress increase if the strike angle is greater than 35.26◦. The critical strength ratio of bedding crack propagation increases when bed-ding strike angle, dip angle and in-situ stress difference decrease and the rock strength increase. Only when the critical conditions of bedding crack initiation and

  15. Research on Erosion Wear of Oilfield Surface Manifold under Hydraulic Fractur-ing Condition%压裂工况下油气田地面管汇的冲蚀磨损研究

    Institute of Scientific and Technical Information of China (English)

    张继信; 康健; 樊建春; 高建村; 欧海

    2016-01-01

    During the process of hydraulic fracturing, high-speed and high-pressure prop-pant particles in sand-carrying fluid can cause erosive wear on the inner wall of ground high pressure pipe manifolds, where the most serious erosion damage occurs in elbows. In order to accurately obtain the specific erosive wear distribution as well as the multiphase flow mech-anism of the high pressure pipe joints, this paper adopts computational fluid dynamics (CFD) analysis and ANSYS-FLUNT software to build the solid-flow phase mathematical model suitable for hydraulic fracturing working condition base on the erosive wear testing experi-ment for high pressure pipe joint materials, thus obtaining the flow mechanism of solid and liquid particles within the high pressure pipe joint elbows, also the erosive wear distribution mechanism and pressure variation mechanism. Comparing our results with failure samples collected from the field, it confirms the consistency of the proposed research, which will provide references for the safety technology of high pressure pipe joints such as the optimiza-tion design and key component monitoring.%水力压裂施工时,携砂液中的高流速、高强度支撑剂颗粒会对地面高压管汇的内壁产生一定的冲蚀磨损,其中弯管的冲蚀磨损尤其严重.为准确掌握在不同工况下高压管汇内多相流的流动规律以及冲蚀磨损的具体分布情况,在高压管汇材料冲蚀磨损试验的基础上,应用计算流体力学方法及ANSYS-FLUNT软件建立了适合水力压裂工况的固液两相流数学模型,得到了高压管汇弯管内液相及固体粒子的流动规律、压力变化规律以及冲蚀磨损的分布规律,并与现场回收的失效样品进行了对比验证.研究结果可以为高压管汇的设计制造、重点部位的监测等安全防护技术提供参考.

  16. The Treatment of Geological Time & the History of Life on Earth in High School Biology Textbooks

    Science.gov (United States)

    Summers, Gerald; Decker, Todd; Barrow, Lloyd

    2007-01-01

    In spite of the importance of geological time in evolutionary biology, misconceptions about historical events in the history of life on Earth are common. Glenn (1990) has documented a decline from 1960 to 1989 in the amount of space devoted to the history of life in high school earth science textbooks, but we are aware of no similar study in…

  17. Limiting the Magnitude of Potential Injection-Induced Seismicity Associated With Waste-Water Disposal, Hydraulic Fracturing and CO2 Sequestration

    Science.gov (United States)

    Zoback, Mark

    2017-04-01

    In this talk, I will address the likelihood for fault slip to occur in response to fluid injection and the likely magnitude of potentially induced earthquakes. First, I will review a methodology that applies Quantitative Risk Assessment to calculate the probability of a fault exceeding Mohr-Coulomb slip criteria. The methodology utilizes information about the local state of stress, fault strike and dip and the estimated pore pressure perturbation to predict the probability of the fault slip as a function of time. Uncertainties in the input parameters are utilized to assess the probability of slip on known faults due to the predictable pore pressure perturbations. Application to known faults in Oklahoma has been presented by Walsh and Zoback (Geology, 2016). This has been updated with application to the previously unknown faults associated with M >5 earthquakes in the state. Second, I will discuss two geologic factors that limit the magnitudes of earthquakes (either natural or induced) in sedimentary sequences. Fundamentally, the layered nature of sedimentary rocks means that seismogenic fault slip will be limited by i) the velocity strengthening frictional properties of clay- and carbonate-rich rock sequences (Kohli and Zoback, JGR, 2013; in prep) and ii) viscoplastic stress relaxation in rocks with similar composition (Sone and Zoback, Geophysics, 2013a, b; IJRM, 2014; Rassouli and Zoback, in prep). In the former case, if fault slip is triggered in these types of rocks, it would likely be aseismic due the velocity strengthening behavior of faults. In the latter case, the stress relaxation could result in rupture termination in viscoplastic formations. In both cases, the stratified nature of sedimentary rock sequences could limit the magnitude of potentially induced earthquakes. Moreover, even when injection into sedimentary rocks initiates fault slip, earthquakes large enough to cause damage will usually require slip on faults sufficiently large that they extend

  18. Transitional geology and its effects on development and longwall mining in Pittsburgh Seam

    Institute of Scientific and Technical Information of China (English)

    Lu Jun; Van Dyke Mark; Su Daniel W.H; Hasenfus Greg

    2016-01-01

    This paper presents the geologic and ground control challenges that were encountered by Consol Energy’s coal mining operations in southwestern Pennsylvania, USA. Geologic encounters, such as sandstone-to-limestone geology transition, massive sandstone channels, shale channels, pyritic rich green claystone, laminated roof, and soft floor, have significantly impacted the development and longwall mining in Consol’s Pittsburgh Seam coal mines. Experience from different mines shows that, in the sandstone-to-limestone geology transition zone, 1.83 m high-tension, fully-grouted primary bolts employed along with 4.88 m cen-ter cable bolts at every other strap greatly improved beam building and ensured proper anchorage into the competent roof. Hydraulic fracturing of the massive sandstone was often necessary to enhance caving of the massive sandstone behind the shields to relieve pressure at the face. The presence of soft floor coupled with presence of thick floor coal and deep cover, induced excessive headgate convergence during retreat of the first right hand longwall panel. In all, it is important to explore the roof and in-seam geology in detail to delineate normal and anomalous geologic conditions prior to and during development. With diligent geologic reconnaissance, geotechnical monitoring, and assessment, site-specific geotechnical solutions have been provided to mine operations to improve safety and productivity.

  19. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20041200 Peng Yujing (Regional Geology and Mineral Resources Survey of Jilin Province, Changchun, Jilin); Chen Erzhen A Preliminary Study on the Ore -Forming Geologic Events (Jilin Geology, ISSN 1001-2427, CN22-1099/P, 22(3), 2003, p. 1 -11, 23, 1 illus. , 38 refs. ) Key words: geological eventAn ore - forming geologic event, as a

  20. 大规模水力压裂过程中超级13Cr 油管冲蚀预测模型建立%Erosion prediction model for super 13Cr tubing during large-scale hydraulic fracturing

    Institute of Scientific and Technical Information of China (English)

    王治国; 杨向同; 窦益华; 罗生俊

    2016-01-01

    大规模水力压裂过程中,高速流动的携砂压裂液会对油管内壁造成冲蚀,导致油管壁厚减薄,承载能力降低。为了准确预测大规模水力压裂过程中油管的冲蚀速率,利用自制的冲蚀实验装置,采用0.2%胍胶压裂液与40/70目石英砂混合形成的液固两相流体,实验研究了冲蚀角度和流体流速对超级13Cr 油管冲蚀速率的影响,建立了适用于大排量高砂比压裂的冲蚀预测模型,运用新模型,可以比较准确地预测注入总液量和排量对超级13Cr 油管壁厚损失的影响。算例分析结果表明,大规模压裂过程中,超级13Cr油管的壁厚损失范围为0.2~1.3 mm,应该控制排量和砂含量,防止油管壁由于冲蚀而导致安全性降低。%Sand-carrying fracturing fluid flowing at high-speed during large-scale hydraulic fracturing can erode inner walls of tubing, resulting in thinning of tubing sidewall and reduction of tubing loading capacity. To predict erosion rate of tubing during large-scale hydraulic fracturing accurately, the impacts of erosion angle and fluid flow speed on erosion rate of the super 13Cr tubing have been tested with an erosion testing unit made by ourselves, solid-liquid dual-phase fluid made of 0.2 % guar fracturing fluid and quartz sand of 40/70 meshes, and an erosion prediction model for fracturing with large discharging rate and high sand proportion has been constructed. By using the newly constructed model, impact of total fluid volume and discharging rate on wall thickness loss of the super 13Cr tubing can be predicted accurately. Case study results show the super 13Cr tubing may lose sidewall thicknesses of 0.2-1.3 mm during large-scale fracturing. Therefore, cares shall be taken to control discharging rate and sand content properly to maintain necessary safety performance of tubing sidewalls in case of erosion.

  1. 水溶性减阻剂在页岩气滑溜水压裂中的应用进展%Recent Advances in Water-Soluble Friction Reducers for Slickwater Hydraulic Fracturing Used in Completion of Shale Gas

    Institute of Scientific and Technical Information of China (English)

    张文龙; 伊卓; 杜凯; 祝纶宇; 刘希; 林蔚然

    2015-01-01

    Slickwater hydraulic fracturing is widely used to improve the efficiency of shale gas exploitation in North America and it also has a broad application prospect in China. The friction reducers are water-soluble polymeric additives which are added to slickwater to reduce friction loss during pumping. In this paper,the mechanism of water-soluble polymeric drag reduction was summed up,and recent progresses in the research of friction reducers,including polysaccharides friction reducers,poly(ethylene oxide) friction reducers and polyacrylamide friction reducer,used in the completion of shale gas were reviewed. The environmentally friendly friction reducers with high drag reduce ability,low damage to shale reservoir and low cost would be the development direction in future.%滑溜水压裂是致密页岩气开采主要采用的增产手段,水溶性减阻剂是滑溜水压裂液中用于降低流体在管道输送过程中所受阻力的化学试剂。介绍了减阻剂的减阻机理,综述了水溶性减阻剂在页岩气滑溜水压裂领域应用的研究进展,包括生物基多糖减阻剂、聚氧化乙烯减阻剂和聚丙烯酰胺类减阻剂在页岩气压裂领域应用的研究现状。对水溶性减阻剂的应用前景进行了展望,减阻性能好、对储层伤害低、环境友好和成本较低廉的减阻剂是未来研究的重点。

  2. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20152392 Geng Shufang(Institute of Geology,Chinese Academy of Geological Sciences,Beijing 100037,China);Liu Ping Deep Geological Structure Constraints on Shallow Geology and Mineralization:A Study in the Land and Sea Areas of East China(Marine Geology&Quaternary Geology,ISSN0256-1492,CN37-1117/P,34(6),2014,p.49-61,8illus.,13refs.,with English abstract)

  3. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140958 Mei Huicheng(No.915GeologicalBrigade,Jiangxi Bureau of Geology and Mineral Resources,Nanchang 330002,China);Li Zhongshe Geological Features and Causes of the Huihuang Geotherm in Xiushui,Jiangxi Province(Journal of Geological Hazards and

  4. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20090700 Chen Anshu(Tianjin Institute of Geology and Mineral Resources,China Geological Survey,Tianjin 300170,China);Li Xiaoguang 1:250 000-Scale Regional Geological Map Spatial Database(Geological Survey and Research,ISSN1672-4135,CN12-1353/P,31(1),2008,p.64-69,2 illus.,2 tables,5 refs.)

  5. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140805Fan Baocheng(Xi’an Center of Geological Survey,China Geology Survey,Xi’an710054,China);Meng Guanglu The Geological Evolution and Metallization of TalasKalatawu Block in Northern Tianshan,Kyrgyzstan(Northwestern Geology,ISSN1009-6248,CN61-1149/P,46(2),2013,p.54-

  6. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20071510 Chen Ge(No.282 Geological Par- ty,Geological Bureau of Sichuan Nuclear In- dustry,Deyang,Sichuan 618000)Assess- ment of Geological Hazards in the Sichuan Sector of the Nanchong-Wanzhou 500 KV Transmisson Line Engineering(Acta Geolog- ica Sichuan,ISSN 1006-0995,CN 51- 1273/P,26(2),2006,p.88-93,2 tables) Key words:geologic hazards,construction field,Sichuan Province Possibility of inducing and intensifying geological hazards by the Nanhong- Wanzhou 500 KV transmission line engineer- ing,geological hazards which probably occur

  7. N80-1油管在水力压裂作业过程中开裂原因分析%Cause analysis of N80-1 tubing fracture during hydraulic fracturing operation

    Institute of Scientific and Technical Information of China (English)

    蔡亚西; 赵映辉; 陈先富; 刘涛; 孙建安

    2015-01-01

    N80-1油管在进行油层水力压裂作业过程中发生脆性开裂,采用断口宏观分析、断口微观分析、金相检验等方法,对其开裂原因进行了系统的分析。结果表明,失效油管理化性能均符合API SPEC 5 CT—2011标准规定值。该油管内壁存在一条深0.2~0.8 mm的缺陷是导致该油管在压裂过程中发生开裂的主要原因。经对失效油管实物以及金相组织形态观察,初步认定缺陷为芯棒划伤。另外,N80-1油管的断裂韧性KIC值较低亦加速该油管发生脆性开裂。改选用断裂韧性KIC值高的油管进行压裂作业将会降低压裂过程中油管发生脆性开裂的概率。%Brittle fracture occurs to N80-1 tubing during hydraulic fracturing operation at oil reservoir . Adopting the methods of macro analysis on fracture , micro analysis on fracture , metallographic test , etc, systematic analysis on the reasons to fracture was performed .The test results showed that properties of the failure tubing conform to API SPEC 5CT-2011.The results indicated that the primary reason of the fracture was the scratch of 0.2-0.8 mm existed in the inner wall of tubing , which happened due to mandrel .In addition, low fracture toughness K IC of N80-1 tubing also enhanced the brittle fracture to this tubing .When the tubing with higher fracture toughness KIC was selected , it would reduce the probability of brittle fracture to tubing during fracturing process .

  8. The Initial Cracking Point of Multi-Branch Hydraulic Fracture Temporary Plugging%多分支缝水力压裂暂堵起裂点位置研究

    Institute of Scientific and Technical Information of China (English)

    夏冲; 廖旋; 刘荆成

    2016-01-01

    针对多分支缝压裂成缝起裂点不明确的问题,基于多孔介质流固耦合理论模型,通过 Comsol Multiphysics 软件进行有限元模拟分支缝压裂过程,分析不同应力差条件下缝内起裂点和井筒起裂点的集中应力变化规律,随着缝内净压力的增加,存在一个差别点,区分起裂点起裂的优先顺序。通过控制缝内净压力变化,调整起裂优先顺序,控制分支缝延伸条数,保证了多分支缝水力压裂缝网的复杂性。对海拉尔油田现场实例计算分析,调整缝内净压力,施工结果与模拟结果相同,可以指导现场施工,提高多分支缝水力压裂的成功率。%The seam crack point of multiple branch seam fracturing is not clear.Based on the theory of porous media of fluid-solid coupling mode,Comsol software was used to simulate branch seam fracturing process using finite element simulation.The changing law of stress concentration of seam crack point and shaft crack point was analysized under the condition of different stress difference it was found that with the increase of net pressure on the seam,there was a difference which distinguished between crack priorities.By controlling the net pressure change within joint,the crack priorities was adjusted,the number of multi-branch fracture was controlled,and the multi-branch seam hydraulic pressure of the complexity of the fracture network was ensured.Calculation analysis of hailaer oil field on the spot was used to adjust the net pressure inside seam.The result of construction was same with simulation,and can be used to guide the construction to improve the success rate of multi-branch seam hydraulic fracturing.

  9. Application Research on Hydraulic Fracturing Technology for Bedrock Geothermal Yield Increasing in Western Henan%水力压裂技术在豫西基岩地热井增产中的应用研究

    Institute of Scientific and Technical Information of China (English)

    申云飞; 卢玮; 陈莹; 程存平

    2016-01-01

    地热资源是清洁能源,其开发利用主要通过钻井工程来实现。地热资源量(水量)大小决定着开发利用的价值。实际中,因地层等条件的复杂和不确定性,导致地热井出水量和温度不能达到预期的目标。特别是在山区基岩缺水地区地热资源开发,由于水量和温度指标偏低,严重影响了清洁能源的开发利用。本文结合工程实例,首次在豫西基岩严重缺水地区通过压裂车和钻井泵分段水力压裂技术,使低产地热井出水量增加3倍,达到了预期的目的。为今后基岩地区地热和地下水资源开发利用增产提供了借鉴。%Geothermal energy is a clean energy source;its development and utilization are mainly realized by drilling engi-neering, and the value of development and utilization are determined by the amount of geothermal resources (water yield). In practice, due to the complexity and uncertainty of the stratum, the water yield and water temperature can not reach the expectation, especially in water-shortage mountainous bedrock area, development and utilization of clean energy source are seriously affected by low water yield and temperature indexes.Staged hydraulic fracturing technology by using fracturing truck and drilling pump is applied in serious water shortage area of Westen Henan for the first time, water output grows 3 times for low yield geothermal well and reached the expected target.It can provide reference for the future development and utilization of geothermal and groundwater resources in the bedrock area.

  10. Etude théorique et expérimentale de la liaison de deux puits par fracturation hydraulique Theoretical and Experimental Analysis of the Linking of Two Wells by Hydraulic Fracturing

    Directory of Open Access Journals (Sweden)

    Bouteca M.

    2006-11-01

    Full Text Available La nécessité de réaliser, dans une couche mince et située à plus de 1000 m de profondeur, une communication hydraulique ou pneumatique entre deux sondages verticaux, a conduit à l'étude d'une méthode basée sur la fracturation hydraulique des puits à relier. Une telle approche suppose que l'on connaisse ou que l'on contrôle la direction des fractures développées. Les techniques actuelles ne permettant pas d'apprécier la direction de fracture avec une précision suffisante, la méthode proposée vise à influencer favorablement cette direction. Elle est basée sur une modification des contraintes effectives en place par une injection préalable de fluide dans les puits à relier. Les résultats obtenus au moyen de calculs analytiques et numériques à deux dimensions sont présentés, ainsi que les expériences réalisées sur un modèle physique en laboratoire. In a thin layer and at a depth of more than 1000 meters, the need to create a hydraulic or pneumatic communication between two vertical boreholes led to research on a method based on hydraulic fracturing in the wells to be linked. Such an approach supposes that the direction of the fractures thus created must be known or controlled. Current techniques cannot be used to assess fracture direction with sufficient accuracy. The method proposed here aims to have a favorable influence on this direction. It is based on making a change in the effective stresses in situ by the prior injection of fluid into the wells to be linked. The results obtained by two-dimensional analytical and digital computing are described together with the experiments performed on a physical model in the laboratory.

  11. Hydraulic fracturing with chlorine dioxide cleanup

    Energy Technology Data Exchange (ETDEWEB)

    Williams, D.A.; Newlove, J.C.; Horton, R.L.

    1990-10-23

    This patent describes a method for fracturing a subterranean formation penetrated by a wellbore. It comprises: injecting a fracturing fluid into the formation to form a vertical fracture therein, the fracturing fluid being gelled with a polymer selected from guar, guar derivatives, acrylamide, acrylamide derivatives, cellulose, cellulose derivatives, and mixtures thereof and crosslinked with an organometallic crosslinking compound and having temperature stability above about 175{degrees} F.; packing the fracture with particulate propping agent; backflowing fluids from the formation through the propped fracture to remove a portion of the polymer; injecting at matrix rates sufficient aqueous solution of chlorine dioxide down the wellbore and into the propped fracture to penetrate at least 60 feet of the propped fracture length and contact polymer in the fracturing fluid and polymer residue in the propped fracture and on the fracture walls, the amount of the chlorine dioxide in the aqueous medium being sufficient to degrade polymer in the fracturing fluid and polymer residue; permitting the chlorine dioxide to remain in contact with the polymer in the fracturing fluid and with the polymer residue on the fracture walls and in the fracture for sufficient time to degrade the polymer thereby reducing the fracturing fluid viscosity and dissolving portions of the polymer residue; and flowing formation fluid from the formation through the propped fracture and into the wellbore to remove substantial portions of the polymer and degraded polymer from the fracture.

  12. Phase-field modeling of hydraulic fracture

    Science.gov (United States)

    Wilson, Zachary A.; Landis, Chad M.

    2016-11-01

    In this work a theoretical framework implementing the phase-field approach to fracture is used to couple the physics of flow through porous media and cracks with the mechanics of fracture. The main modeling challenge addressed in this work, which is a challenge for all diffuse crack representations, is on how to allow for the flow of fluid and the action of fluid pressure on the aggregate within the diffuse damage zone of the cracks. The theory is constructed by presenting the general physical balance laws and conducting a consistent thermodynamic analysis to constrain the constitutive relationships. Constitutive equations that reproduce the desired responses at the various limits of the phase-field parameter are proposed in order to capture Darcy-type flow in the intact porous medium and Stokes-type flow within open cracks. A finite element formulation for the solution of the governing model equations is presented and discussed. Finally, the theoretical and numerical model is shown to compare favorably to several important analytical solutions. More complex and interesting calculations are also presented to illustrate some of the advantageous features of the approach.

  13. Scale and Time Effects in Hydraulic Fracturing.

    Science.gov (United States)

    1984-07-01

    Results on Teton Dam Silt Test Groove Dry Water Fracturing No. Size Density Content Pressure b d t/m 3 %kg/cm 2 in. in. - IG2 3. 1.51.5920.43.2 G3 2.0...a loose zone through which water pressures were applied. • 111 Table 5.2 Summary of Type IV Test Results on Teton Dam Silt Series Test Slot Dry Water Fracturing...Series Test Slot Dry Water Fracturing No. No. Width Density Content Pressure in. t/m 3 % kg/cm 2 S12 0.125 1.60 19.1 3.6 S13 0.25 1.60 19.5 3.9 I S14

  14. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141243Chen Ge(Hangzhou Research Institute of Petroleum Geology,PetroChina,Hangzhou 310023,China);Si Chunsong Study on Sedimentary Numerical Simulation Method of Fan Delta Sand Body(Journal of Geology,

  15. Engineering Geology.

    Science.gov (United States)

    Ivey, John B.

    1983-01-01

    Engineering geology activities in government and the private sector are highlighted. Also highlighted are conferences in this field, awards presented at conferences (including an award to an undergraduate geology student), and a new publication "Geotechnology in Massachusetts." (JN)

  16. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    20160639Cai Wutian(Center for Hydrogeology a nd Environmental Geology Survey,China Geological Survey,Baoding071051,China)Several Issues on Contaminated Sites(Hydrogeology and Engineering Geology,ISSN1000-3665,CN11-2202/P,42(1),2015,p.123

  17. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20142560Hu Hongxia(Regional Geological and Mineral Resources Survey of Jilin Province,Changchun 130022,China);Dai Lixia Application of GIS Map Projection Transformation in Geological Work(Jilin Geology,ISSN1001-2427,CN22-1099/P,32(4),2013,p.160-163,4illus.,2refs.)

  18. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>20081307 Cao Xiping(Geological Museum of China,Beijing 100034)Discussion on the Digitization of Geological Specimen Information and Digital Geological Museum Construction(Acta Geoscientica Sinica,ISSN1006-3021,CN11-3474/P,28(2),2007,p.205-208,1 illus.,1 table,4 refs.)

  19. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20152086 Liu Lei(Shandong Zhengyuan Geo-logical Exploration Institute,China Metallurgical Geology Bureau,Jinan 250101,China)Comparison of Gridding Effect of MapGIS Software(Contributions to Geology and Mineral Resources Research,ISSN1001-1412,CN12

  20. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091383 Cui Yiwen(First Geology and Mineral Resources Prospecting Team of Qinghai Province,Ping’an 810600,China);Zhang Liling Quaternary Three-Dimensional Model of Geological Structures of Changchun City(Jilin Geology,ISSN1001-2427,CN22 -1099/P,27(2),2008,p.125-130,10 illus.,4 tables,14 refs.,with English abstract)

  1. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20132393 Lü Guxian(Institute of Geomechanics,Chinese Academy of Geological Sciences,Beijing 100081,China);Li Xiuzhang Research and Development of Orefield Geology(Geology and Prospecting,ISSN0495-5331,CN11-2043/P,48(6),2012,p.1143-1150,3illus.,1table,46refs.)Key words:study of mineral deposit

  2. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20150901Dai Chuangu(Guizhou Academy of Geologic Survey,Guiyang550005,China);Zheng Qiqian Geological Background Study of Metallogenic in Haixi-Yanshan Tectonic Cycle in Guizhou Province(Guizhou Geology,ISSN1000-5943,CN52-1059/P,31(2),2014,p.82-88,3illus.,2tables,13refs.)Key words:metallogenesis,metallogenic area,

  3. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    20160938Gao Xiaowei(Wuhan Center of Geo-logical Survey,China Geological Survey,Wuhan 430223,China);Wu Xiurong Two Types of Terrain and Regional Mineralization in Sumatra,Indonesia(Geological Bulletin of China,ISSN1671-2552,CN11-4648/P,34

  4. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    20160276Jiang Hanbing(Xi’an Institute of Geology and Mineral Resources,Xi’an710054,China);Yang Hequn The Metallogenic Series Family of Geological Formation in Dunhuang Metallogenetic Belt(Northwestern Geology,ISSN1009-6248,CN61-1149/P,48(1),2015,p.63-71,2illus.,2tables,28refs.)

  5. ECONOMIC GEOLOGY (5)GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20071202 Bai Fu(Second Prospecting Insti- tute of Geology and Mineral Resources of the Gansu Bureau of Geology and Mineral Re- sources,Lanzhou 730020,China);Ma Genxi Analysis of the Occurrence of the Geother- mal Resources in Lanzhou,Gansu Province (Hydrogeology & Engineering Geology,

  6. An Experimental Investigation of the Risk of Triggering Geological Disasters by Injection under Shear Stress

    Science.gov (United States)

    Liu, Yixin; Xu, Jiang; Peng, Shoujian

    2016-12-01

    Fluid injection has been applied in many fields, such as hazardous waste deep well injection, forced circulation in geothermal fields, hydraulic fracturing, and CO2 geological storage. However, current research mainly focuses on geological data statistics and the dominating effects of pore pressure. There are only a few laboratory-conditioned studies on the role of drilling boreholes and the effect of injection pressure on the borehole wall. Through experimental phenomenology, this study examines the risk of triggering geological disasters by fluid injection under shear stress. We developed a new direct shear test apparatus, coupled Hydro-Mechanical (HM), to investigate mechanical property variations when an intact rock experienced step drilling borehole, fluid injection, and fluid pressure acting on the borehole and fracture wall. We tested the peak shear stress of sandstone under different experimental conditions, which showed that drilling borehole, water injection, and increased pore pressure led to the decrease in peak shear stress. Furthermore, as pore pressure increased, peak shear stress dispersion increased due to crack propagation irregularity. Because the peak shear stress changed during the fluid injection steps, we suggest that the risk of triggering geological disaster with injection under shear stress, pore, borehole, and fluid pressure should be considered.

  7. 酸预处理在水力压裂中降低伤害机理研究%A Study on Damage Reduction Mechanism of Acid Preflushing During Hydraulic Fracturing

    Institute of Scientific and Technical Information of China (English)

    刘平礼; 兰夕堂; 李年银; 罗志锋; 刘书杰

    2016-01-01

    Hydraulic fracturing is an effective way to develop low permeability reservoir. However,halfway gelout,fracturing fluid residue and filtrate damage often reduce stimulation effect. On-site application of acid pretreatment fracturing technol-ogy has been proved to be able to reduce damage during fracturing,but the damage reduction mechanism of acid pretreatment remains unclear. In this paper,molecular dimensions of guar gum under both conventional and acidic conditions are quanti-tatively observed by using laser particle analyzer(LPSA). Principle factors affecting the damage of gelout fluid to matrix in acidic environment are also researched here. In addition,microanalysis of damaged core edge after injecting gelout fluid and acid fluid is conducted by means of scanning electron microscope(SEM). We can draw conclusions from the results:molecular dimension of guar gum after gelout is significantly reduced under acidic condition,and the reduction of molecular dimension plays more important role than acidic environment in decreasing damage;acid fluid is able to effectively remove damage caused by fracturing fluid,increase core permeability,and form corrosion channels.%低渗透储层进行常规加砂压裂常常由于压裂液破胶不彻底、残渣和滤液伤害等问题而影响压裂改造效果。压裂前的酸预处理技术可降低压裂过程中伤害,改善压裂效果。利用激光粒度仪对常规压裂液破胶与酸性环境下压裂液破胶过程中瓜胶分子尺寸进行定量观测,研究不同破胶环境下岩石基质伤害的主要因素;通过电镜扫描对注入破胶液与酸液后伤害的岩芯进行微观分析。研究表明,在酸液存在条件下压裂液破胶后瓜胶分子尺寸大幅度降低,瓜胶分子尺寸的降低比酸性环境对降低岩石渗透率伤害贡献更大,酸液能够很好地解除压裂液伤害,提高岩芯渗透率,同时由于酸溶蚀可形成较为明显的溶蚀孔道,进一步提高基质渗流能力。

  8. Study on effect of erosion wear to residual life of coiled tubing for hydraulic fracturing%水力压裂冲蚀磨损对连续管剩余寿命影响研究

    Institute of Scientific and Technical Information of China (English)

    郑华林; 张益维; 刘少胡

    2016-01-01

    针对水力压裂中连续管内壁冲蚀磨损严重和连续管易失效的问题,基于液-固两相流和冲蚀理论,建立了连续管内部砂砾冲蚀模型.采用Grant和Tabakoff模型求解砂砾冲蚀速率,借助实验数据验证了CFD数值模型.利用该模型研究了连续管在不同弯曲度、砂砾粒度、压裂液注入量、质量流量、压裂液粘度对连续管内壁的冲蚀特性.研究表明:弯曲连续管比直连续管冲蚀磨损严重,且弯曲度对连续管内壁的冲蚀磨损影响较大.随着注入量的增加,壁厚平均损失值和壁厚损失峰值呈现快速递增趋势.支撑剂固体颗粒的粒度对连续管内壁的冲蚀磨损影响较大,粒度为40目时连续管冲蚀速率最大.随质量流量的增加,连续管剩余寿命呈线性下降.随压裂液粘度的增加,连续管内壁冲蚀速率总体呈现下降趋势.%Aiming at the problems that the erosion wear of internal wall in coiled tubing is serious and the coiled tubing is easy to fail in hydraulic fracturing, an internal sand erosion model of coiled tubing was established based on liquid -solid two-phaseflow and erosion theory.The sand erosion rate was solved by using Grant and Tabakoff model , and the CFD numerical model was verified by the experimental data .The erosion characteristics of different curvature , particle size of sand, injection volume, mass flow and viscosity of fracturing fluid on internal wall of coiled tubing were studied by using this model .The re-sultsshowed that the erosion of curving coiled tubing is more serious than that of straight coiled tubing , and the curvature has a larger influence on the erosion wear of internal wall in coiled tubing .With the increase of injection volume, the average loss and peak loss of wall thickness present the trend of rapid increasing .The size of solid particle in support agent has a larger influence on the erosion wear of internal wall in coiled tubing , with the maximum erosion rate

  9. Simulation of Hydraulic Fracturing Crack Propagating of Horizontal Shale Well Based on Extended Finite Element Method%基于扩展有限元的页岩水平井压裂裂缝扩展模拟

    Institute of Scientific and Technical Information of China (English)

    魏波; 陈军斌; 谢青; 张杰; 王汉青; 赵逸然

    2016-01-01

    考虑裂缝内流体流动和岩石受力变形,建立页岩水平井水力压裂裂缝扩展数学模型,采用扩展有限元方法求解该模型。分析水平主应力、岩石力学特征参数及注入速度对裂缝扩展长度的影响,并研究多条裂缝的扩展及转向规律。结果表明:岩石弹性模量越大,泊松比越小,形成的裂缝越长;最小主应力越小,压裂液注入速度越大,裂缝扩展长度越长。同时扩展的2条裂缝之间存在应力干扰使裂缝向外转,裂缝间距越近,转向越明显。3条裂缝同时扩展,中间裂缝受到左右两边裂缝的制约作用,起裂较晚,扩展受到限制;随着压裂时间的延长,中间裂缝会摆脱两边裂缝的影响,冲出应力干扰区。%The mathematical model for the hydraulic fracturing crack propagating of horizontal well in shale reservoir was established under considering the flow of fluid in cracks and the deformation of rock,and it was solved using the extended finite element method. The influences of horizontal principal stress,the mechanics parameters of rock and the injection rate of fracturing fluid on the propaga-tion length of cracks were analyzed,and the propagation and steering law of multiple fractures was researched. The results show that the greater the elasticity modulus of reservoir rock and the less the Poissonˊs ratio of it,the longer the fractures;the lower the minimum prin-cipal stress and the greater the injection rate,the longer the fractures. There is stress interference between two simultaneously propaga-ting fractures,which makes two fractures turning to the outside. The closer the fractures are,the more obvious the steering is. When the three fractures simultaneously propagate,the fracture in middle is restricted,and its initiation is later than on both sides. With the fractu-ring time increasing,the middle fracture breaks away from the stress interference of the cracks on both sides and

  10. 柿庄北煤层气井活性水压裂施工参数优化研究%Optimization of hydraulic fracturing parameters for CBM wells in north Shizhuang

    Institute of Scientific and Technical Information of China (English)

    夏日桂

    2016-01-01

    Taking coalbed methane wells in north Shizhuang as the research object, this paper summarized the application of hydraulic fracturing technique using conventional activated water. Based on fracking parameters of 48 wells, the relationship between production wells and operation curve type was discovered, and the influence of fracture initiation and propagation resulting from prepad fluid, fluid discharge, proppant concentration, intensity of proppant input and slug number, was analyzed. The results show that the operation curve type does not affect the production directly, but descent type and stability type are suggested for construction safety. The appropriate ranges are as follows: prepad fluid ratio 30%~40%, fluid discharge 6~8m3/min, proppant concentration 13%~17%, intensity of proppant input 8~12m3/m and slug number less than 2. When the depth of middle part pf perforation section is in the vertical depth of 800~900m, the instability of bore well is evident. After applying the optimized parameters, the success rate of fracking was significantly improved.%以柿庄北煤层气井为研究分析对象,基于常规活性水压裂在该地区的应用情况,通过统计48口井的压裂施工参数,研究了产气井与施工曲线类型的关系;分析了前置液比例、施工排量、砂比、加砂强度、段塞数的合适区间以及井径扩大率对裂缝起裂及延伸的影响。结果表明,施工曲线类型和产气没有明显的相关关系,但是出于施工安全考虑,建议施工过程中尽量控制为下降型和稳定型;各施工参数的合适区间为前置液比例30%~40%,施工排量6~8m3/min,砂比13%~17%,加砂强度8~12m3/m,段塞数0~2个;当射孔段中部垂深在800~900m范围内,井壁失稳更严重。应用优化后的参数和工艺,压裂施工成功率显著提升。

  11. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141912Cao Hui(State Key Laboratory for Continental Tectonics and Dynamics,Institute of Geology,Chinese Academy of Geological Sciences,Beijing 100037,China)Gravitational Collapse and Folding during Orogenesis:A Comparative Study of FIA Trends and Fold Axial Plane Traces(Geology in China,ISSN1000-3657,CN11-1167/P,40(6),2013,p.1818-1828,9illus.,35refs.,with

  12. GENERAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20071601 Yin Yanhong (Qingdao Institute of Marine Geology, Qingdao 266071, China); Sun Jiashi Discovery of Qingdao Iron Meteorite and Its Chemical Composition and Mineralogy (Marine Geology & Quaternary Geology, ISSN0256-1492, CN37-1117/P, 26(3), 2006, p.121-124, 3 illus., 2 tables, 9 refs.)Key words: iron meteorites, Shandong Province The Qingdao iron meteorite was found in May, 2004.

  13. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20070721 Dong Yaosong (National Key La-boratory of Geological Process and Mineral resources, Institute of Mathematical Geology and Remote Sensing, China University of Geosciences, Wuhan 430074, China); Yang Yanchen Mutual Compensation of Nerval Net and Characteristic Analysis in Mineral Resources Exploration (Mineral Resources and Geology, ISSN1001-5663, CN45-1174/TD, 20(1), 2006, p.1-6, 3 illus., 6 tables, 5 refs.) Key words: prospecting and exploration of mineral, neural network systems

  14. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20072222 Cao Xiuding(Chengdu University of Technology,Chengdu 610059,China);Qin Guoqing General Packet Radio Service(GPRS)Technology and Its Application in Geological Hazard Monitoring(The Chinese Journal of Geological Hazard and Control,ISSN1003-8035,CN11-2852/P,17(1),2006,p.69-72,76,2 illus.,3 refs.)Key words:geologic hazards

  15. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>20122174 Bai Daoyuan ( Institute of Geological Survey of Hunan Province,Changsha 410011,China );Jia Baohua Neoproterozoic TectonicEvolution of the Xuefeng Orogenic Zone in Hunan Province ( Sedimentary Geology and Tethyan Geology,ISSN1009-3850,CN51-1593 / P,31 ( 3 ), 2011,p.78-87,2illus.,1 table,96refs. ) Key words:structural evolution,Neoproterozoic Era,Hunan Province This paper deals,on the basis of abundant lithogeochemical and geochronologic

  16. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20041748 Chen Liang (China University of Geosciences, Nanjing , Jiangsu); Meng Gao-tou Application of Information Model on Geological Hazards Investigating and Zoning of Counties and Cities: Taking Xianju County, Zhejiang Province as an Example (Hydroge-ology & Engineering Geology, ISSN 1000-3665, CN11-2202/P, 30(5), 2003, p. 49 - 52, 4 illus. , 2 tables, 6 refs. ) Key words: geologic hazards, information systems

  17. Comparative modeling of fault reactivation and seismicity in geologic carbon storage and shale-gas reservoir stimulation

    Science.gov (United States)

    Rutqvist, Jonny; Rinaldi, Antonio; Cappa, Frederic

    2016-04-01

    The potential for fault reactivation and induced seismicity are issues of concern related to both geologic CO2 sequestration and stimulation of shale-gas reservoirs. It is well known that underground injection may cause induced seismicity depending on site-specific conditions, such a stress and rock properties and injection parameters. To date no sizeable seismic event that could be felt by the local population has been documented associated with CO2 sequestration activities. In the case of shale-gas fracturing, only a few cases of felt seismicity have been documented out of hundreds of thousands of hydraulic fracturing stimulation stages. In this paper we summarize and review numerical simulations of injection-induced fault reactivation and induced seismicity associated with both underground CO2 injection and hydraulic fracturing of shale-gas reservoirs. The simulations were conducted with TOUGH-FLAC, a simulator for coupled multiphase flow and geomechanical modeling. In this case we employed both 2D and 3D models with an explicit representation of a fault. A strain softening Mohr-Coulomb model was used to model a slip-weakening fault slip behavior, enabling modeling of sudden slip that was interpreted as a seismic event, with a moment magnitude evaluated using formulas from seismology. In the case of CO2 sequestration, injection rates corresponding to expected industrial scale CO2 storage operations were used, raising the reservoir pressure until the fault was reactivated. For the assumed model settings, it took a few months of continuous injection to increase the reservoir pressure sufficiently to cause the fault to reactivate. In the case of shale-gas fracturing we considered that the injection fluid during one typical 3-hour fracturing stage was channelized into a fault along with the hydraulic fracturing process. Overall, the analysis shows that while the CO2 geologic sequestration in deep sedimentary formations are capable of producing notable events (e

  18. Emissions from Produced Water Treatment Ponds, Uintah Basin, Utah, USA

    Science.gov (United States)

    Mansfield, M. L.; Lyman, S. N.; Tran, H.; O'Neil, T.; Anderson, R.

    2015-12-01

    An aqueous phase, known as "produced water," usually accompanies the hydrocarbon fluid phases that are extracted from Earth's crust during oil and natural gas extraction. Produced water contains dissolved and suspended organics and other contaminants and hence cannot be discharged directly into the hydrosphere. One common disposal method is to discharge produced water into open-pit evaporation ponds. Spent hydraulic fracturing fluids are also often discharged into the same ponds. It is obvious to anyone with a healthy olfactory system that such ponds emit volatile organics to the atmosphere, but very little work has been done to characterize such emissions. Because oil, gas, and water phases are often in contact in geologic formations, we can expect that more highly soluble compounds (e.g., salts, alcohols, carbonyls, carboxyls, BTEX, etc.) partition preferentially into produced water. However, as the water in the ponds age, many physical, chemical, and biological processes alter the composition of the water, and therefore the composition and strength of volatile organic emissions. For example, some ponds are aerated to hasten evaporation, which also promotes oxidation of organics dissolved in the water. Some ponds are treated with microbes to promote bio-oxidation. In other words, emissions from ponds are expected to be a complex function of the composition of the water as it first enters the pond, and also of the age of the water and of its treatment history. We have conducted many measurements of emissions from produced water ponds in the Uintah Basin of eastern Utah, both by flux chamber and by evacuated canister sampling with inverse modeling. These measurements include fluxes of CO2, CH4, methanol, and many other volatile organic gases. We have also measured chemical compositions and microbial content of water in the ponds. Results of these measurements will be reported.

  19. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131683 Lin Wenjing(Institute of Hydrogeology and Environmental Geology,Chinese Academy of Geological Sciences,Shijiazhuang050061,China);Liu Zhiming An Estimation of HDR Resources in China’s Mainland(Acta Geoscientica Sinica,ISSN1006-3021,CN11-3474/P,33(5),2012,p.807-811,2illus.,2tables,14refs.)

  20. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131088 Fan Difu (Geological Survey of Jiangsu Province , Nanjing 210018 , China ); Xu Xueqiu Origin Study of Geothermal Field in Xiaoyangkou of Rudong County in Jiangsu (Journal of Geology , ISSN1674-3636 , CN32-1796/P , 36 (2), 2012 , p.192-197 , 3illus. , 9refs.) Key words : geothermal fields , Jiangsu Province

  1. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>20081086 Feng Wujun(Geological Research Institute,Jiangsu Oil Field Branch Company,Yangzhou 225012,Jiangsu);Cao Bing Geoheat Resources Evaluation and Target Optimization in Gaoyou Region of Jiangsu Province(Jiangsu Geology,ISSN1003-6474,CN32-1258/P,31(2),2007,p.130-13

  2. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>20050726 Cheng Jiabai (Survey Team of Huabei Geological Exploration Bureau, Sanhe 065201, China); Zhao Yuanyi Prospecting Hypothesis and Verification (Contributions to Geology and Mineral Resources Research, ISSN 1001-1412, CN12-1131/P, 19(2), 2004, p. 122-129, 2 refs. , with English abstract) Key words: prospecting model

  3. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131925 Chen Ning(State Key Laboratory of Geological Hazards Prevention,Chengdu University of Technology,Chengdu 610059,China);Wang Yunsheng Features and Chains Genesis Analysis of Earthquake Geo-Hazards in Yuzi Stream of Wenchuan County(Journal of Engineering Geology,ISSN1004-9665,CN11-3249/P,20(3),2012,p.340-349,4

  4. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131382 Chen Tao(Key Laboratory of Active Tectonics and Volcano,Institute of Geology,China Earthquake Administration,Beijing 100029,China);Liu Yugang The Activity Age of Tarwan Fault and Genesis of the Topographic Scarp(Seismology and Geology,ISSN0253-4967,CN11-2192/P,34(3),

  5. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20090651 Chen Boyang(Fujian Institute of Geological Survey and Research,Fuzhou 350011,China) Bio-Geochemical Characteristics of High and Low-Incidence Area of Stomach Cancer in the Coastal Area of Fujian Province(Geology of Fujian,ISSN1001-3970,CN35-1080/P,27(1),2008,p.29-36,3 tables,6 refs.)

  6. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20040862 Chen Zhihua (Faculty of Engineering, China University of Geosciences, Wuhan, Hubei); Guan Xuefeng Development of DBMS for Environmental Geologic Hazards on WebGIS (Hydrogeology & Engineering Geology, ISSN1000-3665, CN11-2202/P, 30(2), 2003, p. 20-24, 3 illus. , 9 refs. )

  7. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>20050576 Li Sanzhong (College of Marine Geosciences, Ocean University of China, Qingdao 266003,China) ; Zhou Lihong Cenozoic Faulting and Basin Formation in the Eastern North China Plate (Marine Geology & Quaternary Geology, ISSN 0256 - 1492, CN37 -1117/P, 24(3), 2004, p. 57-66, 5 illus. , 33 refs. ) Key words: tectonic framework, North China

  8. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20040834 Chen Yijiu (Geological Exploration Bureau of Guangdong Province, Guangzhou, Guangdong) Discussion on Natural Chornic Irradiation Environment and Pertinent Problems in Guangdong Province, China (Guangdong Geology, ISSN 1001 - 8670, CN44-1201/P, 18(1), 2003, p. 30-41, 7 tables, 1 ref. , with English abstract) Keywords: radioactivity radiation environmental pollution Guangdong Province

  9. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131358 Li Jianzhong (State Key Laboratory of Geological Processes and Mineral Resources , School of Earth Sciences and Resources , China University of Geosciences , Beijing 100083 , China); Cui Jing Geological Application of Mult-Idimensional Data Visualization Based on Geometric Coordinate Method (Earth Science Frontiers

  10. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20142114Lin Quansheng(China University of Geosciences,Bejing 100083,China)On the Geologic Characteristics and Economic Significance of the Cambrian Lintian Group in Fujian Province(Geology of Fujian,ISSN1001-3970,CN35-1080/P,32(4),2013,p.264-273,2illus.,2tables,6refs.)

  11. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140227Li Wenyuan(Xi’an Center of Geological Survey,CGS,Xi’an 710054,ChinaThe Continental Growth and Ore-Forming Processes(Northwestern Geology,ISSN1009-6248,CN61-1149/P,46(1),2013,p.1-10,5illus.,18refs.)

  12. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20041944 Chen Yuchuan (Chinese Academy of Geological Sciences, Beijing) ; Xue Chunli Discussion on the Regional Mineralizing Pedigree of the Ore Deposits in the Northern Margin of the North China Landmass (Geological Journal of China Universities, ISSN 1006-7493, CN32-1440/P, 9(4), 2003, p. 520-535, 2 illus. , 3 tables, 43 refs. ,

  13. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20111337 Chen Guoxu(Faculty of Earth Resources,China University of Geosciences,Wuhan 430074,China);Wu Chonglong Study on Integration of 3D Geological Modeling and Mineral Resource Exploration Mapping(Geology and Prospecting,ISSN0495-5331,CN11-2043/P,46(3),2010,p.542-546,5 illus.,19 refs.)Key words:geological modeling,digital cartography According to the workflow of traditional methods of mineral reserve estimation,the authors took mine 3D geological modeling and mineral reserve estimation mapping as a starting point to explore a new method for the integration of 3D geological modeling and mineral resource exploration mapping.In order to verify this method,the authors have applied this method to some real mines.The results show that this method can effectively solve those problems of

  14. ECONOMIC GEOLOGY (5)GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>20082442 Han Zaisheng(China Geological Servey,Beijing 100011,China);Ran Weiyan Exploration and Evaluation of Shal- low Geothermal Energy(Geology in China, ISSN1000—3657,CN11—1167/P,34(6), 2007,p.1115—1121,6 refs.,with English abstract) Key words:geothermal exploration, geothermal resources

  15. 欧盟页岩气水力压裂法开采生产基本准则及启示%"On minimum principles for the exploration and production of hydrocarbons using high-volume hydraulic fracturing"of EU and its Enlightenment

    Institute of Scientific and Technical Information of China (English)

    刘莎莎; 郭威

    2015-01-01

    The European shale gas reserves are abundant ,but technology is not good .Considering the potential impact of security for public health and the environment caused by hydraulic fracturing technology , the European Commission issued"on minimum principles for the exploration and production of hydrocarbons using high-volume hydraulic fracturing" (2014/70/EU ) in 2014 January .To regulate the shale gas development from the aspects of environmental protection ,basic environmental data monitoring ,exploration and exploitation of choice ,operating norms ,substance use and supervision measures .As the Similar to the EU ,the future we should learn from the EU experience ,accelerate the formulation of China's shale gas development standard ,promoting the formation of shale gas development management system which conforms to our country national condition .%欧盟页岩气储量丰富 ,但技术有限 ,考虑到水力压裂技术所带来的对公众健康和环境安全的潜在影响 ,欧盟委员会于2014年1月发布了《页岩气水力压裂法开采生产基本准则建议案》 ,从环境维护、基础环境数据监测、勘探与开采地选择、操作规范、物质使用及监管措施等方面对页岩气开发加以规范.我国页岩气利用前景与问题与欧盟类似 ,未来应借鉴欧盟经验 ,加快我国页岩气开发标准规范的制定 ,推进形成符合我国国情的页岩气开发管理制度.

  16. NUMERICAL SIMULATION STUDY OF HYDRAULIC FRACTURE INITIATION FOR PERFORATED HORIZONTAL WELL IN SHALE PLAY%页岩储层射孔水平井水力裂缝起裂数值模拟研究

    Institute of Scientific and Technical Information of China (English)

    郭天魁; 张士诚; 潘林华

    2015-01-01

    为明确页岩储层射孔水平井水力裂缝起裂机制,利用Abaqus有限元计算软件,建立三维单级三簇射孔和单射孔段(包含天然裂缝)的压裂裂缝起裂计算模型,研究地应力、井筒方位、射孔参数以及天然裂缝等对裂缝起裂压力和位置的影响。结果表明:裸眼射孔的起裂压力远低于套管射孔;起裂压力随最小水平地应力的增加而增大,但影响程度受垂向地应力与最小水平地应力的比值控制;最大水平地应力和垂向地应力的变化对起裂压力影响不显著;起裂压力大致随井筒方位角的增加而减小,当存在天然裂缝时,起裂压力没有任何线性规律,天然裂缝在剪应力区易发生剪切滑移起裂;起裂压力随射孔方位角的增加先减小后增大,射孔方位角的变化严重影响裂缝的起裂形态;起裂位置与最小和最大水平地应力、井筒方位角和天然裂缝的胶结强度、方位密切相关;由于内部射孔受到两侧射孔产生的沿井筒方向的附加应力干扰,闭合应力增加,因而更难起裂,导致起裂次序从端部射孔开始向中部射孔发展,当应力差较高(>7 MPa)时,附加应力干扰明显,要实现多射孔的多裂缝起裂扩展,需提高注入压力;起裂位置在射孔孔道中的变化是射孔根部应力集中强度与远端受射孔附加应力干扰程度相互竞争的结果;由于射孔簇间距较大,射孔簇间的应力干扰对裂缝起裂影响微弱,各射孔簇压力分布相似。%To understand hydraulic fracture initiation mechanism of perforated horizontal well in shale play,the fracture initiation models of a 3D single-stage three clusters perforation and a single cluster perforation (containing natural fracture) were established by using Abaqus finite element calculation software. The effects of crustal stress,wellbore orientation,perforation parameters and natural fracture on fracture

  17. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20111836 Gao Jian(Sichuan Institute of Geological Survey for Nuclear Industry,Chengdu 610061,China);Shi Yuzhen Feasibility Study of Exploitation of Geothermal Resource in the Lugu Lake Region,Yanyuan,Sichuan Province(Acta Geologica Sichuan,ISSN1006-0995,CN51-1273/P,30(3),2010,p.291-294,1 illus.,1 table,1 ref.,with English abstract)Key words:geothermal water,Sichuan Province20111837 He Jianhua(Geological Brigade 102,Bureau of Geolog

  18. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20101802 Fang Bin (China University of Geosciences,Beijing 100083,China);Yang Yunjun Characteristics and Resource Evaluation of the Jiwa Geothermal Field in Central Qiangtang,Northern Tibet,China (Geological Bulletin of China,ISSN1671-

  19. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20112453 Li Qing (First Design and Research Institute,Ministry of Mechanical Industry, Bengbu 233000, China); Li Yixiang Application of Shallow Geothermal Energy Resources in the Hefei Area(Geology

  20. Marine geology

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, V.P.; Shankar, R.

    Significant scientific contributions in Marine Geology in India during the Nineties have been highlighted in this paper. Sediment trap data collected in the Arabian Sea and Bay of Bengal have provided much understanding about annual sediment fluxes...

  1. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20112745Cheng Shurang(Geological survey of Shanxi Province,Xi’an 710065,China); Zhang Lin Grade Evaluation Based on Fuzzy Clustering and Pattern Recognition of Comprehensive Anomalies of Geophysics and

  2. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20101648 Peng Yujing (Survey of Regional Geology and Mineral Resources of Jilin Province, Changchun 130022, China); Zhai Yuchun Age Determination and Characteristics of the Late Indosinian-Yanshanian Metallogenetic Events of Jilin Province

  3. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20112330 Liu Xifang (Key Laboratory of Saline Lake Resources and Environment, Ministry of Land and Resources,Institute of Mineral Resources, Beijing 100037, China);Zheng Mianping Geological Features

  4. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20102475 Chen Shiliang(No.4 Geological Party of Fujian Province,Ningde 352100,China)A Brief Analysis on Geothermy in the Nantai Isle of Fuzhou Municipality,Fujian Province(Geology of Fujian,ISSN1001-3970,CN35-1080/P,28(4),2009,p.310-314,1 illus.,1 table,3 refs.)Key words:geothermal exploration,Fujian ProvinceBased on the geochemistry and geophysical

  5. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>20122531 Hu Lingzhi ( Institute of Geological Engineering Design & Research of Beijing,Miyun 101500,China );Wang Jiankang Discussion on the Feasibility of Geothermal Resources Development and Utilization in Miyun District,Beijing ( City Geology,ISSN1007-1903,CN11-5519 / P,6 ( 3 ), 2011,p.34-35,59 ,) Key words:geothermal resources,Beijing Geothermal,as a new type of clean energy with the integrated trinity of " heat energy-mineral resource-water resource ",

  6. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20132568 Du Guilin(Seismological Bureau of Weihai City,Weihai 264200,China);Cao Wenhai Genesis of Baoquantang Hot Spring in Weihai and Its Influence on Faulting and Seismic Activities(Marine Geology&Quaternary Geology,ISSN0256-1492,CN37-1117/P,32(5),2012,p.67-72,3illus.,2tables,18refs.)Key words:hot springs,seismicity,Shandong Province

  7. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20072933 Bie Jun(Institute of Oceanology,Chinese Academy of Sciences,Qingdao 266071,China);Huang Haijun Ground Subsidence of the Modern Yellow River Delta and Its Causes(Marine Geology & Quaternary Geology,ISSN0256-1492,CN37-1117/P,28(4),2006,p.29-35,5 illus.,13 refs.,with English abstract)Key words:land subsidence,Yellow River Delta

  8. GENERAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141269 Dai Deqiu(Institute of Geology,Hunan University of Science and Technology,Xiangtan 411201,China);Chen Xinyue Contrastive of Petrography and Mineral Chemistry Characteristics among Olivine and Ca,Al-rich Assemblages(Chinese Journal of Geology,ISSN0563-5020,CN11-1937/P,48(3),2013,p.762-772,3 illus.,2 tables,25 refs.)

  9. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141810 Bian Yumei(Geological Environmental Monitoring Center of Liaoning Province,Shenyang 110032,China);Zhang Jing Zoning Haicheng,Liaoning Province,by GeoHazard Risk and Geo-Hazard Assessment(Journal of Geological Hazards and Environment Preservation,ISSN1006-4362,CN51-1467/P,24(3),2013,p.5-9,2 illus.,tables,refs.)

  10. GENERAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140001Dong Shuwen(Chinese Academy of Geological Sciences,Beijing 100037,China);Li Tingdong Progress of SinoProbe-Deep Exploration in China 2008~2012(Acta Geoscientica Sinica,ISSN1006-3021,CN11-3474/P,34(1),2013,p.7-23,8illus.,69refs.)Key words:deep geology,deep seismic sounding,Continental Scientific Drilling,China SinoProbe 2008~2012,the initial phase

  11. Geology, summary

    Science.gov (United States)

    Sabins, F. F., Jr.

    1975-01-01

    Trends in geologic application of remote sensing are identified. These trends are as follows: (1) increased applications of orbital imagery in fields such as engineering and environmental geology - some specific applications include recognition of active earthquake faults, site location for nuclear powerplants, and recognition of landslide hazards; (2) utilization of remote sensing by industry, especially oil and gas companies, and (3) application of digital image processing to mineral exploration.

  12. PETROLEUM GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>20122476 Bao Yunjie ( Wuxi Research Institute of Petroleum Geology,SINOPEC,Wuxi 214151,China );Wang Shuyi Reservoir Diagenesis of 3rd Member of Feixianguan Formation,Jiannan Gas Field ( Petroleum Geology & Experiment,ISSN1001-6112,CN32-1151 / TE,33 ( 6 ), 2011,p.564-568,2 il-lus.,1plate,2tables,10refs. ) Key words:carbonate reservoirs,diagenesis,Chongqing,Hubei Province

  13. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20072288 Hong Quan(Ningbo Institute for Engineering Investigation,Ningbo 315012,China)Design of Information Management System for Engineering Investigation Maps Based on C/S Model(The Chinese Journal of Geological Hazard and Control,ISSN1003-8035,CN11-2852/P,17(1),2006,p.86-90,2 illus.,6 refs.)Key words:information systems,engineering geological map

  14. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141283 Bai Daoyuan(Hunan Institute of Geological Survey,Changsha 410016,China);Zhong Xiang Nature,Origin and Tectonic Setting of Jinzhou Basin in the South Segment of Xuefeng Orogen(Geology in China,ISSN1000-3657,CN11-1167/P,40(4),2013,p.1079-1091,10 illus.,47 refs.)Key words:foreland basins,strike-slip faults,Hunan Province

  15. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091159 Gao Yan(No.3 Prospecting Team of Anhui Bureau of Coal Geology,Suzhou 234000,China) Effect of Depositional Environment of Coal-Bearing Stratum on Major Coal Seams in Suntan Coalmine,Anhui Province(Geology of Anhui,ISSN 1005- 6157,CN34-1111/P,18(2),2008,p.114 -117,5 illus.,1 ref.,with English abstract)

  16. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20110164 Dong Lianhui(Xinjiang Bureau of Geology and Mineral Resources and Development,Urumqi 830000,China);Feng Jing Research for Classification of Metallogenic Unit of Xinjiang(Xinjiang Geology,ISSN1000-8845,CN65-1092/P,28(1),2010,p.1-15,1 illus.,1 table,17 refs.,with English abstract)Key words:metallogenic provinces,metallogenic belts,metallogenic area,Xinjiang

  17. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20072528 Chen Yuchuan(Chinese Academy of Geological Sciences,Beijing,100037);Pei Rongfu On Minerogenetic(Metallogenetic)Series:Third Discussion(Acta Geologica Sinica,ISSN0001-5717,CN11-1951/P,80(10),2006,p.1501-1508,3illus.,1 table,57 refs.,with English abstract)Key words:metallogenic series20072529 Pei Rongfu(Institute of Mineral Resources,CAGS,Beijing 100037);Mei Yanxiong Event Geology Stimulati

  18. Important geological properties of unconventional resource shales

    Science.gov (United States)

    Slatt, Roger

    2011-12-01

    exploration and development of resource shales are garnering attention. Many potentially economic shale-gas and shale-oil plays are being identified globally. Risks and uncertainties associated with gas- and oil-rich shales include the lack of long-term production histories, environmental concerns related to hydraulic fracturing, uncertainty in calculating hydrocarbons-in-place, and fluctuations in supply, demand, and price.

  19. Treatment of Water Hazard in Red Sandstone Geology on Jiaozuo-Liuzhou Railway%焦柳线红砂岩地质水害工点整治

    Institute of Scientific and Technical Information of China (English)

    王力

    2012-01-01

    针对红砂岩地质易风化崩解,遇水泥化的特点,结合焦柳铁路K670+000-K688+500段水害整治工程具体实践,分析红砂岩地质水害形成原因,提出红砂岩地质坡面防水处理、坡脚基础加固防冲刷以及合理引导地表排水防渗漏的整治方案,并对红砂岩地质条件下铁路防洪工作展开思考和建议。%Against red sandstone geology having characteristics of easy weathering,easy disintegration and argillization,this paper,combined with the practical work of water disaster treatment project at the K670+000-K688+500 Section of Jiaozuo-Liuzhou Railway,analyzes the causes forming geological water disasters in red sandstone area and proposes the treatment scheme with respect to waterproofing work on slope surface in red sandstone geology,reinforcement of slope foot foundation for scour-prevention and proper guidance of surface drainage for leakage-prevention;moreover,the thinking and suggestion on flood control for railway under such conditions is conducted.

  20. ECONOMIC GEOLOGY (3)PETROLEUM GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>20082333 Bai Guoping(Key Laboratory for Hydrocarbon Accumulation of Education Ministry,China University of Petroleum, Beijing 102249,China);Yin Jinyin Petroleum Geological Features and Explo- ration Potential Analyses of North Carnavon Basin,Australia(Petroleum Geology & Ex- periment,ISSN1001—6112,CN32—1151/ TE,29(3),2007,p.253—258,4 illus.,1 table,12 refs.)

  1. Destination: Geology?

    Science.gov (United States)

    Price, Louise

    2016-04-01

    "While we teach, we learn" (Roman philosopher Seneca) One of the most beneficial ways to remember a theory or concept is to explain it to someone else. The offer of fieldwork and visits to exciting destinations is arguably the easiest way to spark a students' interest in any subject. Geology at A-Level (age 16-18) in the United Kingdom incorporates significant elements of field studies into the curriculum with many students choosing the subject on this basis and it being a key factor in consolidating student knowledge and understanding. Geology maintains a healthy annual enrollment with interest in the subject increasing in recent years. However, it is important for educators not to loose sight of the importance of recruitment and retention of students. Recent flexibility in the subject content of the UK curriculum in secondary schools has provided an opportunity to teach the basic principles of the subject to our younger students and fieldwork provides a valuable opportunity to engage with these students in the promotion of the subject. Promotion of the subject is typically devolved to senior students at Hessle High School and Sixth Form College, drawing on their personal experiences to engage younger students. Prospective students are excited to learn from a guest speaker, so why not use our most senior students to engage and promote the subject rather than their normal subject teacher? A-Level geology students embarking on fieldwork abroad, understand their additional responsibility to promote the subject and share their understanding of the field visit. They will typically produce a series of lessons and activities for younger students using their newly acquired knowledge. Senior students also present to whole year groups in seminars, sharing knowledge of the location's geology and raising awareness of the exciting destinations offered by geology. Geology fieldwork is always planned, organised and led by the member of staff to keep costs low, with recent visits

  2. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091749 Cai Hou’an(College of Energy Geology,China University of Geosciences,Beijing 100083,China);Xu Debin SHRIMP U-Pb Isotope Age of Volcanic Rocks Distributed in the Badaohao Area,Liaoning Province and Its Significance(Coal Geology & Exploration,ISSN1001-1986,CN61-1155/P,36(4),2008,p.17-20,2 illus.,1 table,16 refs.)Key words:coal measures,volcanic rocks,U-Pb dating,LiaoningA set of andesite volcanic rocks distributes in the Badaohao area in Heishan County,Liaoning Province.It’s geological age and stratigraphy sequence relationship between the Lower Cretaceous Badaohao Formation and the volcanic rocks can not make sure till now and is influencing the further prospect for coals.Zircon

  3. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20150599Chen Gang(Nanjing Center,China Geological Survey,Nanjing 210016,China);Yao Zhongyou Mineral Database Construction and Analysis of Oceania Region(Geological Bulletin of China,ISSN1671-2552,CN11-4648/P,33(2),2014,p.164-171,13illus.,6refs.)Key words:mineral localities,data bases Based on the database of the standards,construction process,data quality control measures and methods and processes,the authors constructed the databases of Fe,Mn,Cu,Al,Au,Ni,U and REE mineral resources for Oceanian region.Through a comprehensive analysis of the multi-source data information of geology and mineral resources,

  4. ECONOMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20110907 Luo Xue(Faculty of Earth Resource,China Unversity of Geosciences,Wuhan 430074,China);Cao Xinzhi Review on the Change and Development of the Research Thoughts about Mineral Deposit Geology(Contributions to Geology and Mineral Resources Research,ISSN1001-1412,CN12-1131/P,25(2),2010,p.147-152,40 refs.)Key words:study of mineral deposit The development and breakthrough of mineral deposit geology depends to a great extent on the progress and change of its research thoughts.From the traditional study of single mineral,single deposit and single metallogenic model to the comprehensive discussion and whole understanding of metallogenic

  5. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20102152 Bai Daoyuan(Hunan Institute of Geology Survey,Changsha 410011,China);Zhou Kejun Study on Quaternary Tectonic-Sedimentary Evolution of Lujiao Area,East Edge of Yuanjiang Sag,Dongting Basin(Journal of Geomechanics,ISSN1006-6616,CN11-3672/P,15(4),2009,p.409-420,7 illus.,1 table,23 refs.)Key words:basins,Dongtinghu BasinQuaternary Yuanjiang sag is an eastern one of the secondary tectonic units of the Dongting Basin.Detailed geologic mapping and bore data were taken to reveal the Quaternary tectonic,sedimentary and

  6. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20150342Guan Yu(Geo-Environment Monitoring Station of Anhui Province,Hefei230001,China);Chen Xun On Shallow Geothermal Energy Investigation in Urban Planning Zone of Bengbu in Anhui Province(Journal of Geology,ISSN1674-3636,CN32-1796/P,38(1),2014,p.88-93,2illus.,4tables,6refs.)Key words:geothermal energy,Anhui Province The authors conducted studies on shallow geothermal energy in urban planning zone in Bengbu of Anhui Province,depicted the geological settings of shallow geothermal energy,analyzed the natural features,heat exchange

  7. ENGINEERING GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140498An Shize(Sichuan Institute of Geological Engineering Investigation,Chengdu610072,China);Liu Zongxiang On the Failure Mechanism of a Bedding Landslide in Northeast Sichuan(Journal of Geological Hazards and Environment Preservation,ISSN1006-4362,CN51-1467/P,24(1),2013,p.14-19,2illus.,9refs.)Key words:bedding faults,landslides The landslide was caused by excavation engineering.The failure mechanism is explored for slopes with soft interlayer in the red

  8. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140332 Jiang Lin(School of Earth and Space Sciences,Peking University,Beijing100871,China);Ji Jianqing Geologic Analysis on the Prospects of the Enhanced Geothermal System(EGS)in the Bohaiwan Basin(Geology and Prospecting,ISSN0495-5331,CN11-2043/P,49(1),2013,p.167-178,5illus.,4tables,41refs.)Key words:geothermal systems,Bohaiwan Basin Great amounts of thermal energy is stored ubiquitously in rocks with high tempera-

  9. GENERAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20102127 S.L.Shvartsev(Tomsk Department,Trofimuk Institute of Petroleum Geology and Geophysics of Siberian Branch of the RAS)Self-Organizing Abiogenic Dissipative Structures in the Geologic History of the Earth(Earth Science Frontiers,ISSN1005-2321,CN11-3370/P,16(6),2009,p.257-275,3 illus.,4 tables,53 refs.)Key words:abiogenic,water-rock interaction,dissipative structureIt is shown that since the appearance of water on the Earth,a stationary disequilibrium-equilibrium

  10. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20110635 Bai Jinbin(Tianjin Institute of Geological Survey,Yingshui Road 20,Nankai 300191,China),Niu Xiujun Cenozoic Consolidation Characteristics and Land Subsidence in Tianjin(The Chinese Journal of Geological Hazard and Control,ISSN1003-8035,CN11-2825/P,21(1),2010,p.42-46,4 illus.,4 tables,7 refs.)Key words:consolidation,land subsidence,TianjinAccording to the survey data of oil wells in Dagang oilfield and a lot of laboratory data,the paper discussed the relationship between the consolidation characteristics

  11. MATHEMATICAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20110686 Bai Wancheng(Gold Headquarters of the Chinese Armed Police Force,Beijing 100055,China);Dong Jianle Statistic Prediction for Gold Ore Prospecting in China(Contributions to Geology and Mineral Resources Research,ISSN1001-1412,CN12-1131/P,25(1),2010,p.1-4,11,1 illus,1 table,7 refs.,with English abstract)Key words:metallogenic prediction,gold ores,China 20110687 Dong Min(Institute of Geology and Exploration Engineering,Xinjiang University,Urumqi 830046,China);Sun Baosheng Drawing and S

  12. Intelligent systems application in candidate selection and treatment of gas storage wells

    Energy Technology Data Exchange (ETDEWEB)

    Mohaghegh, Shahab; Ameri, Sam [Petroleum and Natural Gas and Engineering Department, West Virginia University, 345E Mineral Resources Building, 26506 Morgantown, WV (United States); Platon, Valeriu [Baker Atlas, 2001 Rankin Road, 77073 Houston, TX (United States)

    2001-11-01

    A series of neural networks and genetic algorithm routines have been used in an integrated and hybrid manner to identify the candidate wells for stimulation in a gas storage field. The intelligent system not only is capable of identifying the candidate wells, but it also recommends whether the well should be chemically treated or hydraulically fractured. Upon the recommendation of the type of the treatment, the intelligent system proposes a recipe for the treatment and forecasts the potential gains that can be expected once the proposed treatment is completed.

  13. Theoretical geology

    Science.gov (United States)

    Mikeš, Daniel

    2010-05-01

    Theoretical geology Present day geology is mostly empirical of nature. I claim that geology is by nature complex and that the empirical approach is bound to fail. Let's consider the input to be the set of ambient conditions and the output to be the sedimentary rock record. I claim that the output can only be deduced from the input if the relation from input to output be known. The fundamental question is therefore the following: Can one predict the output from the input or can one predict the behaviour of a sedimentary system? If one can, than the empirical/deductive method has changes, if one can't than that method is bound to fail. The fundamental problem to solve is therefore the following: How to predict the behaviour of a sedimentary system? It is interesting to observe that this question is never asked and many a study is conducted by the empirical/deductive method; it seems that the empirical method has been accepted as being appropriate without question. It is, however, easy to argument that a sedimentary system is by nature complex and that several input parameters vary at the same time and that they can create similar output in the rock record. It follows trivially from these first principles that in such a case the deductive solution cannot be unique. At the same time several geological methods depart precisely from the assumption, that one particular variable is the dictator/driver and that the others are constant, even though the data do not support such an assumption. The method of "sequence stratigraphy" is a typical example of such a dogma. It can be easily argued that all the interpretation resulting from a method that is built on uncertain or wrong assumptions is erroneous. Still, this method has survived for many years, nonwithstanding all the critics it has received. This is just one example of the present day geological world and is not unique. Even the alternative methods criticising sequence stratigraphy actually depart from the same

  14. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091163 Jiang Huichao(Tongji University College of Ocean and Earth Science,Shanghai 200092,China);Xiao Yongjun Analysis of Cenozoic Subsurface Temperatures of the Jiyang Depression,Shandong Province(Geology in China,ISSN1000-3657,CN11- 1167/P,35(2),2008,p.273-278,3 illus.,2 tables,15 refs.)

  15. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20151090 Bian Huiying(School of Environmental Sciences and Engineering,Chang’an University,Xi’an 10054,China);Wang Shuangming Hydrodynamic Conditions of Geothermal Water in Gushi Depression of Guanzhong Basin(Coal Geology&Exploration;,ISSN1001-1986,CN61-1155/P,42(3),2014,p.50-54,60,9illus.,11refs.,

  16. ENVIRONMENTAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20042333 Chen Cuibai (School of Water Resources and Environment, China University of Geosciences, Beijing); Yang Qi The Laboratory Study of Biodegradation and Adsorption and Desorption of Trichloroethylene to Mixed Bacteria (Hydrogeology & Engineering Geology, ISSN1000 - 3665, CN11-2202/P, 31(1), 2004, p. 47-51, 6 illus. , 4 tables, 14 refs. )

  17. GENERAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20090720 Wang Haiqiao(Institute of Earth Resources and Information,China University of Petroleum(East China),Dongying 257061,China);Zhong Jianhua Theory of Geological Holography(Earth Science Frontiers, ISSN1005-2321,CN11-3370/P,15 (3),2008,p.370-379,8 illus.,24 refs.)

  18. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20070403 Deng Xiaoying (Zhengzhou Geo-Engineering Exploration Institute, Zhengzhou 450053, China); Yang Guoping Features and Origin of Geothermal Fluid in the New District of Hebi, Henan Provionce (Hydrogeology & Engineering Geology, ISSN1000-3665, CN11-2202/P, 32(2), 2005, p.111-114, 4 illus., 1 table, 7 refs.) Key words: thermal waters, Henan Province

  19. GENERAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131375 Dai Deqiu(Institute of GeologyHunan University of Science and TechnologyXiangtan 411201,China);Wang Shijie Comparison of Petrography and Mineral Chemistry Characters between Plagioclase Olivine Inclusions and Typical Ca,Al-Rich Inclusions(Acta Mineralogica Sinica,ISSN1000-4734CN52-1045/P,32(3),2012,p.341-348,3

  20. ENGINEERING GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20152724 Chen Dan(State Key Laboratory of Geohazard Prevention and Geoenvironment Protection,Chengdu University of Technology,Chengdu 610059,China);Fu Ronghua Study on the Responses of Landslide to Earthquake:Taking Kudiguazi Landslide as an Example(Geological Journal of China Universities,

  1. SEISMIC GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    20160094Cao Lei(Institute of Geology and Geophysics,Chinese Academy of Sciences,Beijing100029,China);Hao Jinlai Rupture Process Of March 10,2014,M W6.9 Earthquake in the Northwestern Coast of California(Chinese Journal of Geophysics,ISSN0001-