WorldWideScience

Sample records for hydantoin acetate-mediated induction

  1. Epoxy hydantoins as matrix resins

    Science.gov (United States)

    Weiss, J.

    1983-01-01

    Tensile strength and fracture toughness of castings of the hydantoin resins cured with methylenedianiline are significantly higher than MY 720 control castings. Water absorption of an ethyl, amyl hydantoin formulation is 2.1 percent at equilibrium and Tg's are about 160 C, approximately 15 deg below the final cure temperature. Two series of urethane and ester-extended hydantoin epoxy resins were synthesized to determine the effect of crosslink density and functional groups on properties. Castings cured with methylenedianiline or with hexahydrophthalic anhydride were made from these compounds and evaluated. The glass transition temperatures, tensile strengths and moduli, and fracture toughness values were all much lower than that of the simple hydantoin epoxy resins. Using a methylene bishydantoin epoxy with a more rigid structure gave brittle, low-energy fractures, while a more flexible, ethoxy-extended hydantoin epoxy resin gave a very low Tg.

  2. Mechanism of formation of hydantoins

    Energy Technology Data Exchange (ETDEWEB)

    Worman, J.J.; Uhrich, K.; Olson, E.; Diehl, J.; Farnum, S.; Hawthorne, S.

    1985-10-01

    Hydantoins, (I), are biologically active compounds which occur in nature and have been isolated from such sources as sugar beets and butterfly wings. Synthetic analogs have found widespread use as anticonvulsant drugs, bacteriocides, stabilizers in photographic film, and in the preparation of high temperature epoxy resins. Uses, preparation, and reactions of hydantoins have been extensively studied and are reported elsewhere. Recently a number of hydantoin isomers have been detected and identified in coal gasification condensate water from the gasification of Indian Head (ND) lignite in a slagging fixed bed gasifier. The hydantoins constitute a major portion of the organics in the condensate water. In generation the concentrations of hydantoins found in the condensate water from an ash gasifier are smaller than those found from the slagging process. Lignite coal reacting in a slagging gasifier gives the largest concentration of hydantoins in the condensate water. The major isomer in the coal gasification condensate water is 5,5-dimethylhydantoin (DMH). DMH is formed from individual species (acetone, cyanide, ammonia, and carbonate) in the condensate water and does not form directly in the gasifier. The rate of formation of DMH was first order in all of the reactants as expressed by the equation: Rate of formation of DMH = (Acetone) (HCN) (NH/sub 3/) (CO/sub 2/). This kinetic data is valuable in predicting the rate of formation of DMH in coal gasification condensate water, provided the model is applicable. A mechanism consistent with the kinetic data and partially verified by others is shown in Scheme 1. 13 refs.

  3. Fetal hydantoin syndrome: A case report

    National Research Council Canada - National Science Library

    Singh, A; Bhatia, HP; Mohan, A; Sharma, N

    2016-01-01

    ... it becomes mandatory to take anticonvulsants on regular basis during pregnancy. Fetal hydantoin syndrome (FHS) is a fetopathy likely to occur when a pregnant women takes hydantoin for epileptic seizures. Hanson and Smith in 1975 coined the term FHS. [4] Its classical features include growth and developmental delay, craniofacial anomalies, varying ...

  4. A Sustainable, Semi-Continuous Flow Synthesis of Hydantoins.

    Science.gov (United States)

    Vukelić, Stella; Koksch, Beate; Seeberger, Peter H; Gilmore, Kerry

    2016-09-12

    Hydantoins are an important class of heterocycles with applications in pharmacy, agriculture, and as intermediates in organic synthesis. Traditional synthetic procedures to access hydantoins are target oriented with multiple synthetic steps and often use reagents that are not commercially available or sustainable. Herein, an efficient process is described for accessing hydantoins starting from commercially available amines using consecutive gas-liquid transformations (oxygen, carbon dioxide). This semi-continuous process produced ten benzylic/aliphatic hydantoins in good overall yields (52-84 %).

  5. Fetal hydantoin syndrome: A case report

    Directory of Open Access Journals (Sweden)

    A Singh

    2016-01-01

    Full Text Available Fetal hydantoin syndrome (FHS is a spectrum of defects caused to the developing fetus by exposure to the teratogenic effects of antiepileptic drug (AED phenytoin during pregnancy. Its clinical manifestations include limb abnormalities, ocular defects, central nervous system anomalies, intrauterine growth restriction, and hand and phalangeal anomalies. This case report presents an 8-year-old child born to an epileptic mother with a history of AED therapy, with features suggestive of FHS.

  6. Discovery, design, and synthesis of anti-metastatic lead phenylmethylene hydantoins inspired by marine natural products

    NARCIS (Netherlands)

    Mudit, M.; Khanfar, M.; Muralidharan, A.; Thomas, S.; Shah, G.V.; van Soest, R.W.M.; El Sayed, K.A.

    2009-01-01

    The Red Sea sponge Hemimycale arabica afforded the known (Z)-5-(4-hydroxybenzylidene)-hydantoin (1), (R)-5-(4-hydroxybenzyl)hydantoin (2), and (Z)-5-((6-bromo-1H-indol-3-yl)methylene)-hydantoin (3). The natural phenylmethylene hydantoin (PMH) 1 and the synthetic

  7. Fetal Hydantoin Syndrome and Its Anaesthetic Implications: A Case Report

    Directory of Open Access Journals (Sweden)

    Ranju Singh

    2012-01-01

    Full Text Available Fetal hydantoin syndrome is a rare disorder that is believed to be caused by exposure of a fetus to the anticonvulsant drug phenytoin. The classic features of fetal hydantoin syndrome include craniofacial anomalies, prenatal and postnatal growth deficiencies, underdeveloped nails of the fingers and toes, and mental retardation. Less frequently observed anomalies include cleft lip and palate, microcephaly, ocular defects, cardiovascular anomalies, hypospadias, umbilical and inguinal hernias, and significant developmental delays. Anaesthesia for incidental surgery in such a patient poses unique challenges for the anesthesiologist. We report the successful management of a 4-year-old male child with fetal hydantoin syndrome, cleft palate, spina bifida, atrial septal defect, and dextrocardia for tibialis anterior lengthening under subarachnoid block.

  8. Biological evaluation of certain substituted hydantoins and benzalhydantoins against microbes

    Science.gov (United States)

    Hidayat, Ika-Wiani; Thu, Yee Yee; Black, David St. C.; Read, Roger W.

    2016-02-01

    Twenty-three synthetic (thio)hydantoins and benzalhydantoins were evaluated for antimicrobial activity against Candida albicans, Malassezia furfur, Escherichia coli and Staphylococcus aureus, by the paper disc diffusion method. 3-n-butyl-4'-nitrobenzalhydantoin showed very high activity against E. coli and high selectivity with respect to the other microorganisms, while 3-n-butyl-2'-bromo-4',5'-dimethoxybenzal hydantoin demonstrated very high selectivity in its activity against M. furfur and S. aureus. These compounds show the most promise as drug lead compounds.

  9. Facile Synthesis of Hydantoin Derivatives under Microwave Irradiation

    OpenAIRE

    FAGHIHI, Khalil; ZAMANI, Khosrow; Mobinikhaledi, Akbar

    2004-01-01

    The rapid and highly efficient synthesis of hydantoin derivatives 3(a-f) was achieved under microwave irradiation by using a domestic microwave oven from the reactions of cyanohydrin derivatives 2(a-f) with ammonium carbonate. The reaction proceeded rapidly (2-5 min.), and as a result a series of hydantoin derivatives 3(a-f) were obtained in high yields. All of the synthesized compounds were fully characterized by their melting point, 1H-NMR, FTIR spectroscopy and elemental analyses....

  10. Proton impact charge transfer on hydantoin - Prebiotic implications

    Science.gov (United States)

    Bacchus-Montabonel, Marie-Christine

    2016-11-01

    Formation and destruction of prebiotic compounds in astrophysical environments is a major issue in reactions concerning the origin of life. Detection of hydantoin in laboratory irradiation of interstellar ice analogues has confirmed evidence of this prebiotic compound and its stability to UV radiation or collisions may be crucial. Considering the different astrophysical environments, we have investigated theoretically proton-induced collisions with hydantoin in a wide energy range, from eV in the interstellar medium, up to keV for processes involving solar wind or supernovae shock-waves protons. Results are compared to previous investigations and qualitative trends on damage under spatial radiations are suggested.

  11. Microwave-Assisted Hydantoins Synthesis on Solid Support

    Science.gov (United States)

    Coursindel, Thibault; Martinez, Jean; Parrot, Isabelle

    2010-01-01

    In this laboratory activity, students are introduced to a three-step synthesis of hydantoin (imidazolidine-2,4-dione), a moiety that is found in many biologically active compounds. Using a microwave oven and solid-support technology, this synthetic experiment is designed for masters-degree candidates working in organic chemistry or upper-level…

  12. Antimicrobial N-brominated hydantoin and uracil grafted polystyrene beads.

    Science.gov (United States)

    Farah, Shady; Aviv, Oren; Laout, Natalia; Ratner, Stanislav; Domb, Abraham J

    2015-10-28

    Hydantoin-N-halamine derivatives conjugated on polystyrene beads are promising disinfectants with broad antimicrobial activity affected by the gradual release of oxidizing halogen in water. The objective of this work was to identify and test of hydantoin-like molecules possessing urea moiety, which may provide N-haloamines releasing oxidizing halogens when exposed to water at different rates and release profiles for tailored antimicrobial agents. In this work, several hydantoin (five member ring) and for the first time reported, uracil (six member ring) derivatives have been conjugated to polystyrene beads and tested for their lasting antimicrobial activity. Four molecules of each series were conjugated onto polystyrene beads from the reaction of the N-potassium hydantoin or uracil derivatives onto chloromethylated polystyrene beads. A distinct difference in bromine loading capacity and release profiles was found for the different conjugated derivatives. All tested materials exhibit strong antimicrobial activity against Escherichia coli and bacteriophages MS2 of 7 and ~4 log reduction, respectively. These results highlight the antimicrobial potential of halogenated cyclic molecules containing urea groups as water disinfection agents.

  13. A diversity-oriented approach to spirocyclic and fused hydantoins via olefin metathesis.

    Science.gov (United States)

    Dhara, Kalyan; Midya, Ganesh Chandra; Dash, Jyotirmayee

    2012-09-21

    An efficient and general method is reported to prepare a diverse series of 5,5-spirocyclic and 1,5-, 4,5-, and 3,4-fused bicyclic imidazolidinone derivatives based on selective alkylation and ring closing metathesis (RCM) by exploiting the four possible points of diversity in the hydantoin ring. Hydantoins containing trienes and tetraenes undergo selective RCM and cross metathesis to afford functionalized spirohydantoins. A tandem metathesis sequence involving ring closing-ring opening-ring closing and cross metathesis (RC-RO-RC-CM) occurred with a hydantoin triene to give a bicyclic hydantoin dimer in high yield. The fused bicylic dimer could participate in cross metathesis to produce a functionalized fused hydantoin derivative. The methodology establishes novel routes to unnatural amino acids, proline homologues, and cyclic vicinal diamines.

  14. Synthesis and Antitussive Effect of New Hydantoin Compounds

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qun-li; SONG Li-jun; WANG En-si

    2013-01-01

    A series of new hydantoin compounds was synthesized with 3-bromo phenylacetic acid and 3,4-dimethylbromobenzene as starting material,7-bromo-2-tetralone and 2-bromo-5,6,8,9-tetrahydro-7-benzocycloheptenone as intermediate and Ullmann reaction,Suzuki reaction and Bucherer-Berg's reaction as key steps.The structures of the key intermediate and target compounds were confirmed by 1H NMR,13C NMR,IR and MS.Bioactivity research showed that target compounds 6a,6c,6d,6e and 15i had significant antitussive effect on the ammonia-induced cough of mice.

  15. Traceless Synthesis of Hydantoin by Focused Microwave Irradiation

    Institute of Scientific and Technical Information of China (English)

    Lee Ming-juan; SUN Chung-ming

    2004-01-01

    Hydantoin analogs have shown versatile therapeutic applications and some of them have been approved by FDA as drugs. For example, Fosphenytoin as a sodium channel antagonist is used for the treatment of epilepsy. Phenytoin has antiarrhythmic, anticonvulsant and antineuralgic activities. Ethotoin and Mephenytoin both show anticonvulsant effect. Nilutamide is a non-steroidal orally-active antiandrogen in combination with surgical castration for the treatment of stage D2 metastatic prostate cancer. (Figure 1)An efficient, microwave-assisted method for the liquid-phase combinatorial synthesis of hydantoins is presented. Nucleophilic substitution of poly (ethylene glycol) immobilized chloroacetyl group with several primary amines is carried out in dichloromethane under microwave cavity. After introduction of various isocyanates, the cyclization/ cleavage step can be performed in mild basic condition by microwave flash heating. Compared to conventional thermal hearting,microwave irradiation decreased the reaction time on the support from several hours to several minutes. The coupling of microwave technology with liquid phase combinatorial synthesis constitutes a novel and attractive avenue for the rapid generation of structurally diverse libraries in good yield and high purity.

  16. Fetal hydantoin syndrome: inhibition of placental folic acid transport as a potential mechanism for fetal growth retardation in the rat

    Energy Technology Data Exchange (ETDEWEB)

    Will, M.; Barnard, J.A.; Said, H.M.; Ghishan, F.K.

    1985-04-01

    Maternal hydantoin ingestion during pregnancy results in a well defined clinical entity termed ''fetal hydantoin syndrome''. The clinical characteristics of this syndrome includes growth retardation, and congenital anomalies. Because folic acid is essential for protein synthesis and growth, and since hydantoin interferes with intestinal transport of folic acid, the authors postulated that part of the fetal hydantoin syndrome may be due to inhibition of placental folic acid by maternal hydantoin. Therefore, they studied in vivo placental folate transport in a well-established model for fetal hydantoin syndrome in the rat. Our results indicate that maternal hydantoin ingestion, significantly decreased fetal weight and placental and fetal uptake of folate compared to controls. To determine whether maternal hydantoin ingestion has a generalized or specific effect on placental function, they examined placental and fetal zinc transport in the same model. Our results indicate that zinc transport is not altered by hydantoin ingestion. They conclude that maternal hydantoin ingestion results in fetal growth retardation which may be due in part to inhibition of placental folate transport.

  17. 海因环氧树脂/HHPA体系的制备与性能%Synthesize Hydantoin Epoxy and Preparation Cured Hydantoin Epoxy/HHPA

    Institute of Scientific and Technical Information of China (English)

    李玲; 田晋丽; 陈剑楠

    2012-01-01

    Hydantoin epoxy resin was synthesized and hydantoin epoxy in presence of hexahydroph-thalic anhydride (HHPA) as the curing agent was preparation. Hydantoin epoxy resin was substantiated by FTIR and 1 H-NMR spectrum. Non-isothermal differential scanning calorimetry (DSC) was examined to follow the curing reaction of hydantoin epoxy/HHPA system. Epoxy equivalent of hydantoin epoxy resin is 164g equiv : and viscosity is 6. 9Pa · S at 25°C which the closed to diglycidyl ether of bisphenol FCCYDF-180). The DSC analyses showed that there are an exothermic reaction peak from 90℃ to 210°C for the hydantoin epoxy/HHPA system and top of the peak is 152. 5℃ at 10℃/min,which determined main reaction of hydantoin epoxy/HHPA system. The curing process temperatures such as gel temperature (Tge1) =93. 7℃ , curing temperature (Tp) = 136. 9℃ and post-curing temperature (Ttreat) =181. 2℃ were acquired by extrapolation, which confirmed a lowering of the cure temperature of the hydantoin epoxy/HHPA system to avoid defect formation. Curing characterization of hydantoin epoxy resin is the similar with diglycidyl ether of bisphenol A. The hydantoin epoxy/HHPA cured resin was made and its properties were studied. Investigations show that the flex-ural strength is 122MPa, flexural modul is 2. 8GPa, impact strength is 14. 9kJ/m2,and limit oxygen index is 23 which indicates mechanical properties of hydantoin epoxy resin exceeds diglycidyl ether of bisphenol A. Therefore hydantoin epoxy resin can a candidate matrix for performance composite material manufacture and adhesive application in automobile industries, shipbuilding, aerospace, laminates and insulation material.%合成了海因环氧树脂,采用红外光谱和核磁共振进行了表征,以六氢苯酐(HHPA)为固化剂,制备了海因环氧树脂/HHPA体系,研究了海因环氧树脂/HHPA体系的固化反应性及其固化物的性能.结果表明:树脂体系在升温速率为10℃/min的条件下,在90~210℃有

  18. Enzymatic production of enantiopure amino acids from mono-substituted hydantoin substrates.

    Science.gov (United States)

    Matcher, Gwynneth F; Dorrington, Rosemary A; Burton, Stephanie G

    2012-01-01

    Biocatalytic conversion of 5-substituted hydantoin derivatives is an efficient method for the production of unnatural enantiomerically pure amino acids. The enzymes required to carry out this hydrolysis occur in a wide variety of eubacterial species each of which exhibit variations in substrate selectivity, enantiospecificity, and catalytic efficiency. Screening of the natural environment for bacterial strains capable of utilizing hydantoin as a nutrient source (as opposed to rational protein design of known enzymes) is a cost-effective and valuable approach for isolating microbial species with novel hydantoin-hydrolysing enzyme systems. Once candidate microbial isolates have been identified, characterization and optimization of the activity of target enzyme systems can be achieved by subjecting the hydantoin-hydrolysing system to physicochemical manipulations aimed at the enzymes activity within the natural host cells, expressed in a heterologous host, or as purified enzymes. The latter two options require knowledge of the genes encoding for the hydantoin-hydrolysing enzymes. This chapter describes the methods that can be used in conducting such development of hydantoinase-based biocatalytic routes for production of target amino acids.

  19. A DFT study of solvation effects and NBO analysis on the tautomerism of 1-substituted hydantoin

    Directory of Open Access Journals (Sweden)

    Meisam Shabanian

    2016-09-01

    Full Text Available 1-Substituted hydantoins (1-SH have been known as a benefit intermediate for producing agricultural and pharmaceuticals. The effect of solvent polarity on the tautomeric equilibria of 1-substituted hydantoin ring is studied by the density functional theory calculation (B3LYP/6–31++G(d,p level for predominant tautomeric forms of hydantoin derivatives (1-NO2, 1-CF3, 1-Br, 1-H, 1-CHCH2, 1-OH, 1-CH3 in the gas phase and selected solvents (benzene (non-polar solvent, tetrahydrofuran (THF (polar aprotic solvent and water (protic solvent. For electron withdrawing and releasing derivatives in the gas phase and solution Hy1 forms is more stable and dominant form. In addition variation of dipole moments and charges on atoms in the solvents are studied.

  20. Synthesis, DFT calculations and cytotoxic investigation of platinum complexes with 3-thiolanespiro-5‧-hydantoin and 4-thio-1H-tetrahydropyranespiro-5‧-hydantoin

    Science.gov (United States)

    Bakalova, Adriana; Buyukliev, Rossen; Momekov, Georgi

    2015-07-01

    Two organic compounds - 3-thiolanespiro-5‧-hydantoin, 4-thio-1H-tetrahydropyranespiro-5‧-hydantoin and four new Pt(II) and Pt(IV) complexes with general formulas cis-[Pt(L)2Cl2] and cis-[Pt(L)2Cl4] were synthesized. The obtained compounds were characterized by elemental analysis, IR, 1H, 13C NMR spectroscopy. The hybrid DFT calculations were used for optimization of the structure geometries of the ligand (L1) and its Pt(II) complex (1). The calculated structural parameters such as bond lengths and angles are in good agreement with the experimental data for similar hydantoins and their platinum complexes. The obtained results showed that the geometry of the complex (1) is plane square and the bounding of the L1 with platinum ion is realized by sulfur atom from thiolane ring. The complexes were tested for cytotoxicity in vitro on four human tumor cell lines. The tested compounds exerted concentration-dependent cytotoxic effects against some of the tumor cell lines.

  1. Observed and predicted hydrogen bond motifs in crystal structures of hydantoins, dihydrouracils and uracils

    NARCIS (Netherlands)

    Cruz-Cabeza, A.J.; Schwalbe, C.H.

    2012-01-01

    A survey of crystal structures containing hydantoin, dihydrouracil and uracil derivatives in the Cambridge Structural Database revealed four main types of hydrogen bond motifs when derivatives with extra substituents able to interfere with the main motif are excluded. All these molecules contain two

  2. Induction

    DEFF Research Database (Denmark)

    Sprogøe, Jonas; Elkjaer, Bente

    2010-01-01

    The purpose of this paper is to explore how induction of newcomers can be understood as both organizational renewal and the maintenance of status quo, and to develop ways of describing this in terms of learning.......The purpose of this paper is to explore how induction of newcomers can be understood as both organizational renewal and the maintenance of status quo, and to develop ways of describing this in terms of learning....

  3. Investigation of the Hydantoin Monomer and its Interaction with Water Molecules

    Science.gov (United States)

    Gruet, Sébastien; Perez, Cristobal; Schnell, Melanie

    2017-06-01

    Hydantoin (Imidazolidine-2,4-dione, C_3H_4N_2O_2) is a five-membered heterocyclic compound of astrobiological interest. This molecule has been detected in carbonaceous chondrites [1], and its formation can rise from the presence of glycolic acid and urea, two prebiotic molecules [2]. The hydrolysis of hydantoin under acidic conditions can also produce glycine [3], an amino acid actively searched for in the interstellar medium. Spectroscopic data of hydantoin is very limited and mostly dedicated to the solid phase. The high resolution study in gas phase is restricted to the work recently published by Ozeki et al. reporting the pure rotational spectra of the ground state and two vibrational states of the molecule in the millimeter-wave region (90-370 GHz)[4]. Using chirped-pulse Fourier-transform microwave (CP-FTMW) spectroscopy, we recorded the jet-cooled rotational spectra of hydantoin with water between 2 to 8 GHz. We observed the ground state of hydantoin monomer and several water complexes with one or two water molecules. All the observed species exhibit a hyperfine structure due to the two nitrogen atoms present in the molecule, which were fully resolved and analyzed. Additional experiments with a ^{18}O enriched water sample were realized to determine the oxygen-atom positions of the water monomers. These experiments yielded accurate structural information on the preferred water binding sites. The observed complexes and the interactions that hold them together, mainly strong directional hydrogen bonds, will be presented and discussed. [1] Shimoyama, A. and Ogasawara, R., Orig. Life Evol. Biosph., 32, 165-179, 2002. DOI:10.1023/A:1016015319112. [2] Menor-Salván, C. and Marín-Yaseli, M.R., Chem. Soc. Rev., 41(16), 5404-5415, 2012. DOI:10.1039/c2cs35060b. [3] De Marcellus P., Bertrand M., Nuevo M., Westall F. and Le Sergeant d'Hendecourt L., Astrobiology. 11(9), 847-854, 2011. DOI:10.1089/ast.2011.0677. [4] Ozeki, H., Miyahara R., Ihara H., Todaka S., Kobayashi

  4. Platinum(IV) complexes with some derivatives of 5-methyl-5-(4-pyridyl) hydantoin. Synthesis, study and comparative pharmacological investigation.

    Science.gov (United States)

    Bakalova, A; Buyukliev, R; Ivanova, Z; Momekov, G; Ivanov, D

    2013-08-01

    3 Pt(IV) complexes with 3-ethyl-5-methyl-5-(4-pyridyl)hydantoin (4), 3-propyl-5-methyl-5-(4-pyridyl)hydantoin (5) and 3-benzyl-5-methyl-5-(4-pyridyl)hydantoin (6) with general formulae cis-[Pt(L)2Cl4] were synthesized. The novel compounds were characterized by elemental analysis, IR, 1H, 13C, NMR spectra in solid state and in solution. The studies showed that the ligands coordinate to the platinum ions in a monodentate manner through the nitrogen atom from the pyridine ring. The cytotoxic activity in vitro of newly synthesized complexes as well as their previously prepared analogous of Pt(IV) with other derivatives like 3-amino-5-methyl-5-(4-pyridyl)hydantoin (1), 5-methyl-5-(4-pyridyl)hydantoin (2), 3,5-dimethyl-5-(4-pyridyl)hydantoin (3) was screened against a panel of human tumor cell lines. The tested compounds displayed cytotoxic activity which was invariably superior with the Pt(IV) complex with 3-benzyl-5-methyl-5-(4-pyridyl)hydantoin (6) causing 50% inhibition of cellular viability at micromolar concentration, though the activity of the other studied Pt(IV) complexes proved to greatly decrease in the order 5-4-3-2-1. © Georg Thieme Verlag KG Stuttgart · New York.

  5. Prebiotic significance of extraterrestrial ice photochemistry: detection of hydantoin in organic residues.

    Science.gov (United States)

    de Marcellus, Pierre; Bertrand, Marylène; Nuevo, Michel; Westall, Frances; Le Sergeant d'Hendecourt, Louis

    2011-11-01

    The delivery of extraterrestrial organic materials to primitive Earth from meteorites or micrometeorites has long been postulated to be one of the origins of the prebiotic molecules involved in the subsequent apparition of life. Here, we report on experiments in which vacuum UV photo-irradiation of interstellar/circumstellar ice analogues containing H(2)O, CH(3)OH, and NH(3) led to the production of several molecules of prebiotic interest. These were recovered at room temperature in the semi-refractory, water-soluble residues after evaporation of the ice. In particular, we detected small quantities of hydantoin (2,4-imidazolidinedione), a species suspected to play an important role in the formation of poly- and oligopeptides. In addition, hydantoin is known to form under extraterrestrial, abiotic conditions, since it has been detected, along with various other derivatives, in the soluble part of organic matter of primitive carbonaceous meteorites. This result, together with other related experiments reported recently, points to the potential importance of the photochemistry of interstellar "dirty" ices in the formation of organics in Solar System materials. Such molecules could then have been delivered to the surface of primitive Earth, as well as other telluric (exo-) planets, to help trigger first prebiotic reactions with the capacity to lead to some form of primitive biomolecular activity.

  6. Solvent effects on the structure-property relationship of anticonvulsant hydantoin derivatives: A solvatochromic analysis

    Directory of Open Access Journals (Sweden)

    Trišović Nemanja

    2011-10-01

    Full Text Available Abstract Considering the pharmaceutical importance of hydantoins, a set of 25 derivatives of phenytoin, nirvanol and 5-methyl-5-phenylhydantoin, the lipophilicities of which were gradually increased by the introduction of different alkyl, cycloalkyl and alkenyl groups in position N3, was synthesized. Their properties under consideration were either estimated empirically, by UV/Vis spectroscopy, or calculated using established medicinal chemistry software. The UV absorption spectra of the investigated compounds were recorded in the region from 200 to 400 nm, in selected solvents of different polarities. The effects of solvent dipolarity/polarizability and solvent-solute hydrogen bonding interactions were analyzed by means of the linear solvation energy relationship (LSER concept proposed by Kamlet and Taft. Furthermore, the relationships between solvent-solute interactions and selected structural features of the solutes, which are believed to markedly affect the processes of absorption, distribution, metabolism, excretion and toxicity (ADMETox, were discussed. Satisfactory correlations were found between hydrogen bonding properties and solute size and the in silico calculated bioactivity descriptors, in particular %Abs. (human intestinal absorption, log BB (blood-brain barrier permeation and log kA (protein binding affinities parameters. In view of the results of this study, the investigated hydantoin derivatives met the pharmacokinetic criteria for pre-selection as drug candidates and qualified them for the pharmacodynamic phase of antiepileptic drug development.

  7. Bioactive Hydantoin Alkaloids from the Red Sea Marine Sponge Hemimycale arabica

    Directory of Open Access Journals (Sweden)

    Diaa T. A. Youssef

    2015-10-01

    Full Text Available In the course of our continuing efforts to identify bioactive secondary metabolites from Red Sea marine invertebrates, we have investigated the sponge Hemimycale arabica. The antimicrobial fraction of an organic extract of the sponge afforded two new hydantoin alkaloids, hemimycalins A and B (2 and 3, together with the previously reported compound (Z-5-(4-hydroxybenzylideneimidazolidine-2,4-dione (1. The structures of the compounds were determined by extensive 1D and 2D NMR (COSY, HSQC and HMBC studies and high-resolution mass spectral determinations. Hemimycalins A (2 and B (3 represent the first examples of the natural N-alkylated hydantoins from the sponge Hemimycale arabica. Compounds 1–3 displayed variable antimicrobial activities against E. coli, S. aureus, and C. albicans. In addition, compound 1 displayed moderate antiproliferative activity against the human cervical carcinoma (HeLa cell line. These findings provide further insight into the chemical diversity as well as the biological activity of this class of compounds.

  8. Bioactive Hydantoin Alkaloids from the Red Sea Marine Sponge Hemimycale arabica.

    Science.gov (United States)

    Youssef, Diaa T A; Shaala, Lamiaa A; Alshali, Khalid Z

    2015-10-28

    In the course of our continuing efforts to identify bioactive secondary metabolites from Red Sea marine invertebrates, we have investigated the sponge Hemimycale arabica. The antimicrobial fraction of an organic extract of the sponge afforded two new hydantoin alkaloids, hemimycalins A and B (2 and 3), together with the previously reported compound (Z)-5-(4-hydroxybenzylidene)imidazolidine-2,4-dione (1). The structures of the compounds were determined by extensive 1D and 2D NMR (COSY, HSQC and HMBC) studies and high-resolution mass spectral determinations. Hemimycalins A (2) and B (3) represent the first examples of the natural N-alkylated hydantoins from the sponge Hemimycale arabica. Compounds 1-3 displayed variable antimicrobial activities against E. coli, S. aureus, and C. albicans. In addition, compound 1 displayed moderate antiproliferative activity against the human cervical carcinoma (HeLa) cell line. These findings provide further insight into the chemical diversity as well as the biological activity of this class of compounds.

  9. Crystallization and preliminary crystallographic studies of an active-site mutant hydantoin racemase from Sinorhizobium meliloti CECT4114

    Energy Technology Data Exchange (ETDEWEB)

    Martínez-Rodríguez, Sergio [Department of Cellular and Molecular Interactions, Vrije Universiteit Brussel, 1050 Brussels (Belgium); Ultrastructure Laboratory, Vrije Universiteit Brussel, 1050 Brussels (Belgium); González-Ramírez, Luis Antonio [Laboratorio de Estudios Cristalográficos, IACT (CSIC-U. Granada), P. T. Ciencias de la Salud, Granada 18100 (Spain); Clemente-Jiménez, Josefa María; Rodríguez-Vico, Felipe; Las Heras-Vázquez, Francisco Javier [Departamento de Química Física, Bioquímica y Química Inorgánica, Área de Bioquímica y Biología Molecular, Edf. CITE I, Universidad de Almería (Spain); Gavira, Jose Antonio, E-mail: jgavira@ugr.es; García-Ruiz, Juan Ma. [Laboratorio de Estudios Cristalográficos, IACT (CSIC-U. Granada), P. T. Ciencias de la Salud, Granada 18100 (Spain); Department of Cellular and Molecular Interactions, Vrije Universiteit Brussel, 1050 Brussels (Belgium)

    2008-01-01

    Crystals of an active-site mutated hydantoin racemase from S. meliloti have been obtained in the presence and absence of d,l-5-isopropyl-hydantoin and characterized by X-ray diffraction. A recombinant active-site mutant of hydantoin racemase (C76A) from Sinorhizobium meliloti CECT 4114 (SmeHyuA) has been crystallized in the presence and absence of the substrate d,l-5-isopropyl hydantoin. Crystals of the SmeHyuA mutant suitable for data collection and structure determination were grown using the counter-diffusion method. X-ray data were collected to resolutions of 2.17 and 1.85 Å for the free and bound enzymes, respectively. Both crystals belong to space group R3 and contain two molecules of SmeHyuA per asymmetric unit. The crystals of the free and complexed SmeHyuA have unit-cell parameters a = b = 85.43, c = 152.37 Å and a = b = 85.69, c = 154.38 Å, crystal volumes per protein weight (V{sub M}) of 1.94 and 1.98 Å{sup 3} Da{sup −1} and solvent contents of 36.7 and 37.9%, respectively.

  10. Hydantoin derivatives of L- and D-amino acids: synthesis and evaluation of their antiviral and antitumoral activity.

    Science.gov (United States)

    Rajic, Zrinka; Zorc, Branka; Raic-Malic, Silvana; Ester, Katja; Kralj, Marijeta; Pavelic, Kresimir; Balzarini, Jan; De Clercq, Erik; Mintas, Mladen

    2006-11-01

    3,5-Disubstituted hydantoin (1,3-imidazolidinedione) derivatives 5a-h were prepared by base induced cyclization of the corresponding N-(1-benzotriazolecarbonyl)-L- and D-amino acid amides 4a-h. Compounds 5a-h were evaluated for their cytostatic and antiviral activities. Among all the compounds evaluated, 3-benzhydryl-5-isopropyl hydantoin (5a) showed a weak but selective inhibitory effect against vaccinia virus (EC(50) = 16 microg/mL; selectivity index: 25). 3-Cyclohexyl-5-phenyl hydantoin (5g) showed inhibitory activity against cervical carcinoma (HeLa, IC(50) = 5.4 microM) and breast carcinoma (MCF-7, IC(50) = 2 microM), but also cytotoxic effects towards human normal fibroblasts (WI 38). On the contrary, the 3-benzhydryl-5-phenyl substituted hydantoin derivative 5h showed moderate inhibitory activity towards HeLa, MCF-7, pancreatic carcinoma (MiaPaCa-2), lung carcinoma (H 460) and colon carcinoma (SW 620) (IC(50) = 20-23 microM), but no effect on WI 38.

  11. Theoretical Investigation of Tautomerism Stability of Hydantoin in the Gas Phase and in the Solution

    Directory of Open Access Journals (Sweden)

    Wala W. Fares

    2014-09-01

    Full Text Available The relative stability of the different tautomers of hydantoin has been studied through the use of DFT method. The structures and the vibrational frequencies of all stable tautomers and all the transitions states connecting between them have been calculated at the B3LYP/6-311+G(d,p level of theory in the gas phase and selected solvents using IE-PCM model. Final energies have been obtained in single-point B3LYP/6-311++(3df,2p calculations. The results show that the diketo tautomer T1 is more stable than the other tautomers. Variation of charge densities at bond critical points, dipole moments and NBO charges on atoms in the solvents were studied.

  12. Transition-Metal-Free Cross-Coupling of Indium Organometallics with Chromene and Isochroman Acetals Mediated by BF3·OEt2.

    Science.gov (United States)

    Gil-Negrete, José M; Pérez Sestelo, José; Sarandeses, Luis A

    2016-09-02

    A transition-metal-free coupling of triorganoindium reagents with benzopyranyl acetals mediated by a Lewis acid has been developed. The reaction of R3In with chromene and isochroman acetals in the presence of BF3·OEt2 afforded 2-substituted chromenes and 1-substituted isochromans, respectively, in good yields. The reactions proceed with a variety of triorganoindium reagents (aryl, heteroaryl, alkynyl, alkenyl, alkyl) using only 50 mol % of the organometallic, thus demonstrating the efficiency of these species. Preliminary mechanistic studies indicate the formation of an oxocarbenium ion intermediate in the presence of the Lewis acid.

  13. Preparation and Curing Kinetics of Hydantoin Epoxy/DDS System%海因环氧树脂/DDS体系的制备与性能

    Institute of Scientific and Technical Information of China (English)

    李玲; 田晋丽

    2011-01-01

    We have synthesized hydantoin epoxy resin and hydantoin epoxy/dia minophenyl sulfon(DDS) system.Hydantoin epoxy resin was substantiated by FT-IR and 1H-NMR spectrum.Non-isothermal differential scanning calorimetry(DSC) was examined to follow the curing process.The analyses show that there is an exothermic reaction peak from 100 ℃ to 307 ℃ for the hydantoin epoxy/DDS system and top of the peak is 197 ℃,which confirms main reaction of hydantoin epoxy/DDS system.Curing characteristicness of hydantoin epoxy resin is the similar with that of diglycidyl ether of bisphenol A and cycloaliphatic epoxy resin(TDE-85).The hydantoin epoxy/DDS cured system was made and its properties were studied.Investigations show that mechanical properties and the heat resistance of hydantoin epoxy resin have the same with of diglycidyl ether of bisphenol A,flame-retardant characteristicness of hydantoin epoxy resin is good than of diglycidyl ether of bisphenol A,the flexural strength is 111MPa,flexural modul is 4.14 GPa,impact strength is 14.8 kJ/m2,Tg is 142 ℃,and limit oxygen index is 26.6,so hydantoin epoxy resin can become matrix for performance composite material manufacture and adhesive application in automobile industries,shipbuilding,aerospace and laminates.%合成了海因环氧树脂,采用红外光谱和核磁共振进行了表征,制备了海因环氧树脂/二氨基二苯砜(DDS)体系,研究了海因环氧树脂/DDS体系的固化反应特性及固化物的性能。结果表明,树脂体系在100℃~296℃有一放热峰,峰值温度为197℃,140℃的凝胶时间长于42 min,在180℃下仅8 min;树脂浇铸体的氧指数为26.6,弯曲强度为111MPa,弯曲模量为4.14 GPa,冲击强度为14.8 kJ/m2。

  14. Montmorillonite K-10 as a catalyst in the synthesis of 5, 5-disubstituted hydantoins under ultrasound irradiation

    Indian Academy of Sciences (India)

    J Safari; L Javadian

    2013-09-01

    The rapid and highly efficient synthesis of 5,5-disubstituted hydantoins achieved by threecomponent condensation of corresponding ketones and aldehydes, potassium cyanide and ammonium carbonate in an additional reaction under ultrasound irradiation by using montmorillonite K-10 as a heterogenous catalyst. Utilizing ultrasound irradiation and montmorillonite in this method has several benefits, for example short reaction time, high yield and use of recyclable catalyst.

  15. Poly(ethylene glycols as grinding additives in the mechanochemical preparation of highly functionalized 3,5-disubstituted hydantoins

    Directory of Open Access Journals (Sweden)

    Andrea Mascitti

    2017-01-01

    Full Text Available The mechanochemical preparation of highly functionalized 3,5-disubstituted hydantoins was investigated in the presence of various poly(ethylene glycols (PEGs, as safe grinding assisting agents (liquid-assisted grinding, LAG. A comparative study under dry-grinding conditions was also performed. The results showed that the cyclization reaction was influenced by the amount of the PEG grinding agents. In general, cleaner reaction profiles were observed in the presence of PEGs, compared to dry-grinding procedures.

  16. 2H-chromene derivatives bearing thiazolidine-2,4-dione, rhodanine or hydantoin moieties as potential anticancer agents.

    Science.gov (United States)

    Azizmohammadi, Mohammad; Khoobi, Mehdi; Ramazani, Ali; Emami, Saeed; Zarrin, Abdolhossein; Firuzi, Omidreza; Miri, Ramin; Shafiee, Abbas

    2013-01-01

    A variety of (Z)-[(2H-chromen-3-yl)methylene]azolidinones 6a-t bearing thiazolidine-2,4-dione, rhodanine or hydantoin scaffolds were designed and synthesized as potential anticancer agents. Inhibitory effect of synthesized compounds 6a-t on the viability of cancer and non-cancer cells was assessed using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) reduction assay. The SAR study revealed that the N-substitution of azolidinone moiety cannot improve the activity but S/NH replacement (thiazolidine-2,4-dione/hydantoin) and S/O alteration (rhodanine/thiazolidine-2,4-dione) enable us to modulate the growth inhibition activity against various cell lines. Moreover, 6-bromo and 2-methyl substituents on chromene ring had positive effects on growth inhibitory activity depending on the tumor cell lines. Among the synthesized compounds, hydantoin derivative 6o with a 6-bromo-2-methyl-2H-chromene substructure showed the best profile of cytotoxicity comparable to that of cisplatin as standard anticancer agent. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  17. A case of prenatal diagnosis of fetal hydantoin syndrome by ultrasound

    Directory of Open Access Journals (Sweden)

    Gollop Thomaz Rafael

    1999-01-01

    Full Text Available Fetal hydantoin syndrome (FHS is a set of disruptions occasionally present in fetuses exposed in utero to phenytoin or other anticonvulsants. Administration of phenytoin in early pregnancy may impair proper psychomotor performance expected for children's development. Several combined phenotypic markers delineate the syndrome, but the presence of single clinical signs is more common. There is controversy about the etiology of FHS. Associated disruptions may be related to a deficiency in a detoxifying enzyme (epoxide hydrolase, vascular problems, and/or factors not yet known. Genetic causes are believed to influence susceptibility to the drug. This text reports an unusual pattern of malformations detected in an ultrasound scan (gastroschisis, sacral meningomyelocele, and absence of the right lower limb and in the anatomopathological study (left-side gastroschisis, sacral meningomyelocele, scoliosis, left clubfoot, absence of the right lower limb, and pectus carinatum of a fetus whose mother took phenytoin. These defects may have been provoked by exposure to the drug during embryogenesis. In view of similar malformations observed in cases of prenatal exposure to cocaine, a recognized vasoconstrictor, it is suggested that vascular disruptions of hemodynamic origin constituted the event leading to some of the anomalies caused in the developing embryo. A complication of the chorionic villus sampling procedure, used for cytogenetic analysis, is another possibility.

  18. Conformational cycle and ion-coupling mechanism of the Na+/hydantoin transporter Mhp1.

    Science.gov (United States)

    Kazmier, Kelli; Sharma, Shruti; Islam, Shahidul M; Roux, Benoît; Mchaourab, Hassane S

    2014-10-14

    Ion-dependent transporters of the LeuT-fold couple the uptake of physiologically essential molecules to transmembrane ion gradients. Defined by a conserved 5-helix inverted repeat that encodes common principles of ion and substrate binding, the LeuT-fold has been captured in outward-facing, occluded, and inward-facing conformations. However, fundamental questions relating to the structural basis of alternating access and coupling to ion gradients remain unanswered. Here, we used distance measurements between pairs of spin labels to define the conformational cycle of the Na(+)-coupled hydantoin symporter Mhp1 from Microbacterium liquefaciens. Our results reveal that the inward-facing and outward-facing Mhp1 crystal structures represent sampled intermediate states in solution. Here, we provide a mechanistic context for these structures, mapping them into a model of transport based on ion- and substrate-dependent conformational equilibria. In contrast to the Na(+)/leucine transporter LeuT, our results suggest that Na(+) binding at the conserved second Na(+) binding site does not change the energetics of the inward- and outward-facing conformations of Mhp1. Comparative analysis of ligand-dependent alternating access in LeuT and Mhp1 lead us to propose that different coupling schemes to ion gradients may define distinct conformational mechanisms within the LeuT-fold class.

  19. Synthesis, Molecular Modeling, and Biological Evaluation of Novel Tetrahydro-β-Carboline Hydantoin and Tetrahydro-β-Carboline Thiohydantoin Derivatives as Phosphodiesterase 5 Inhibitors

    Directory of Open Access Journals (Sweden)

    Ashraf H. Abadi

    2011-01-01

    Full Text Available Two series of fused tetrahydro-β-carboline hydantoin and tetrahydro-β-carboline thiohydantoin derivatives with a pendant 2,4-dimethoxyphenyl at position 5 were synthesized, and chiral carbons at positions 5 and 11a swing from R,R to R,S, S,R, and S,S. The prepared analogues were evaluated for their capacity to inhibit phosphodiesterase 5 (PDE5 isozyme. The R absolute configuration of C-5 in the β-carboline hydantoin derivatives was found to be essential for the PDE5 inhibition. Chiral carbon derived from amino acid even if of the S configuration (L-tryptophan may lead to equiactive or more active isomers than those derived from amino acid with the R configuration (D-tryptophan. This expands the horizon from which efficient PDE5 inhibitors can be derived and may offer an economic advantage. The thiohydantoin derivatives were less active than their hydantoin congeners.

  20. 5-Benzylidene-hydantoin is a new scaffold for SIRT inhibition: From virtual screening to activity assays.

    Science.gov (United States)

    Sacconnay, Lionel; Ryckewaert, Lucie; Randazzo, Giuseppe Marco; Petit, Charlotte; Passos, Carolina Dos Santos; Jachno, Jelena; Michailovienė, Vilma; Zubrienė, Asta; Matulis, Daumantas; Carrupt, Pierre-Alain; Simões-Pires, Claudia Avello; Nurisso, Alessandra

    2016-03-31

    Sirtuins (SIRTs) are a family of enzymes able to catalyze the deacetylation of the N-acetyl lysines of both histone and non-histone substrates. Inhibition of SIRTs catalytic activity was recently reported in the literature as being beneficial in human diseases, with very promising applications in cancer therapy and enzymatic neurodegeneration. By combining a structure-based virtual screening of the Specs database with cell-based assays, we identified the 5-benzylidene-hydantoin as new scaffold for the inhibition of SIRT2 catalytic activity. Compound 97 (Specs ID AH-487/41657829), active in the low μM range against SIRT2, showed the optimal physicochemical properties for passive absorption as well as relatively low cytotoxicity in vitro. Further studies revealed non-competitive and mixed-type kinetics toward acetyl-lysine substrates and NAD(+), respectively, and a non-selective profile for SIRT inhibition. A binding mode consistent with the experimental evidence was proposed by molecular modeling. Additionally, the levels of acetyl-p53 were shown to be increased in HeLa cells treated with 97. Taken together, these results encourage further investigation of 5-benzylidene-hydantoin derivatives for their SIRT-related therapeutic effects.

  1. New insights in the removal of the hydantoins, oxidation product of pyrimidines, via the base excision and nucleotide incision repair pathways.

    Science.gov (United States)

    Redrejo-Rodríguez, Modesto; Saint-Pierre, Christine; Couve, Sophie; Mazouzi, Abdelghani; Ishchenko, Alexander A; Gasparutto, Didier; Saparbaev, Murat

    2011-01-01

    Oxidative damage to DNA, if not repaired, can be both miscoding and blocking. These genetic alterations can lead to mutations and/or cell death, which in turn cause cancer and aging. Oxidized DNA bases are substrates for two overlapping repair pathways: base excision (BER) and nucleotide incision repair (NIR). Hydantoin derivatives such as 5-hydroxyhydantoin (5OH-Hyd) and 5-methyl-5-hydroxyhydantoin (5OH-5Me-Hyd), major products of cytosine and thymine oxidative degradation pathways, respectively, have been detected in cancer cells and ancient DNA. Hydantoins are blocking lesions for DNA polymerases and excised by bacterial and yeast DNA glycosylases in the BER pathway. However little is known about repair of pyrimidine-derived hydantoins in human cells. Here, using both denaturing PAGE and MALDI-TOF MS analyses we report that the bacterial, yeast and human AP endonucleases can incise duplex DNA 5' next to 5OH-Hyd and 5OH-5Me-Hyd thus initiating the NIR pathway. We have fully reconstituted the NIR pathway for these lesions in vitro using purified human proteins. Depletion of Nfo in E. coli and APE1 in HeLa cells abolishes the NIR activity in cell-free extracts. Importantly, a number of redundant DNA glycosylase activities can excise hydantoin residues, including human NTH1, NEIL1 and NEIL2 and the former protein being a major DNA glycosylase activity in HeLa cells extracts. This study demonstrates that both BER and NIR pathways can compete and/or back-up each other to remove hydantoin DNA lesions in vivo.

  2. New insights in the removal of the hydantoins, oxidation product of pyrimidines, via the base excision and nucleotide incision repair pathways.

    Directory of Open Access Journals (Sweden)

    Modesto Redrejo-Rodríguez

    Full Text Available BACKGROUND: Oxidative damage to DNA, if not repaired, can be both miscoding and blocking. These genetic alterations can lead to mutations and/or cell death, which in turn cause cancer and aging. Oxidized DNA bases are substrates for two overlapping repair pathways: base excision (BER and nucleotide incision repair (NIR. Hydantoin derivatives such as 5-hydroxyhydantoin (5OH-Hyd and 5-methyl-5-hydroxyhydantoin (5OH-5Me-Hyd, major products of cytosine and thymine oxidative degradation pathways, respectively, have been detected in cancer cells and ancient DNA. Hydantoins are blocking lesions for DNA polymerases and excised by bacterial and yeast DNA glycosylases in the BER pathway. However little is known about repair of pyrimidine-derived hydantoins in human cells. METHODOLOGY/PRINCIPAL FINDINGS: Here, using both denaturing PAGE and MALDI-TOF MS analyses we report that the bacterial, yeast and human AP endonucleases can incise duplex DNA 5' next to 5OH-Hyd and 5OH-5Me-Hyd thus initiating the NIR pathway. We have fully reconstituted the NIR pathway for these lesions in vitro using purified human proteins. Depletion of Nfo in E. coli and APE1 in HeLa cells abolishes the NIR activity in cell-free extracts. Importantly, a number of redundant DNA glycosylase activities can excise hydantoin residues, including human NTH1, NEIL1 and NEIL2 and the former protein being a major DNA glycosylase activity in HeLa cells extracts. CONCLUSIONS/SIGNIFICANCE: This study demonstrates that both BER and NIR pathways can compete and/or back-up each other to remove hydantoin DNA lesions in vivo.

  3. POLYMERIZATION OF N,N′-(PYROMELLITOYL)-BIS-L-LEUCINE DIACID CHLORIDE WITH HYDANTOIN DERIVATIVES BY MICROWAVE IRRADIATION

    Institute of Scientific and Technical Information of China (English)

    Khalil Faghihi

    2004-01-01

    Facile and rapid polycondensation reactions of N,N′-(pyromellitoyl)-bis-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h were developed by using a domestic microwave oven in the presence ora small amount of polar organic medium such as o-cresol. The polycondensation reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7-10 min, producing a series of novel optically active poly(amide-imide)s 3a-h with high yield and inherent viscosity of 0.35-0.65 dL/g. All of the above polymers were fully characterized by FT-IR, elemental analyses, inherent viscosity (ηiaa), solubility test and specific rotation. Some structural characterization and physical properties of these optically active poly(amide-imide)s are reported.

  4. Poly(ethylene glycol)s as grinding additives in the mechanochemical preparation of highly functionalized 3,5-disubstituted hydantoins

    Science.gov (United States)

    Guerra, Ruben; Taydakov, Ilya; Tonucci, Lucia; d’Alessandro, Nicola; Lamaty, Frederic; Martinez, Jean

    2017-01-01

    Summary The mechanochemical preparation of highly functionalized 3,5-disubstituted hydantoins was investigated in the presence of various poly(ethylene) glycols (PEGs), as safe grinding assisting agents (liquid-assisted grinding, LAG). A comparative study under dry-grinding conditions was also performed. The results showed that the cyclization reaction was influenced by the amount of the PEG grinding agents. In general, cleaner reaction profiles were observed in the presence of PEGs, compared to dry-grinding procedures.

  5. A new route for the prebiotic synthesis of nucleobases and hydantoins in water/ice solutions involving the photochemistry of acetylene.

    Science.gov (United States)

    Menor-Salván, César; Marín-Yaseli, Margarita R

    2013-05-10

    The origin of nucleobases and other heterocycles is a classic question in the chemistry of the origins of life. The construction of laboratory models for the abiotic synthesis of nitrogen heterocycles in plausible natural conditions also aids the understanding and prediction of chemical species in the Solar System. Here, we report a new explanation for the origin of hydantoins, purines, and pyrimidines in eutectic water/ice/urea solutions driven by ultraviolet irradiation (in the 185-254 nm range, UVC) of acetylene under anoxic conditions. An analysis of the products indicates the synthesis of hydantoin and 5-hydroxyhydantoin, the purines uric acid, xanthine, and guanine, and the pyrimidines uracil and cytosine. The synthesis occurred together with the photo-oxidation of bases in a complex process for which possible pathways are proposed. In conclusion, an acetylene-containing atmosphere could contribute to the origin of nucleobases in the presence of a urea/water system by an HCN-independent mechanism. The presence of ice has a dual role as a favorable medium for the synthesis of nucleobases and protection against degradation and as a source of free radicals for the synthesis of highly oxidized heterocycles. A mechanism for the origin of hydantoins and uracil from urea in plausible conditions for prebiotic chemistry is also proposed.

  6. 海因酶和N-氨甲酰氨基酸水解酶的比例:由5-取代海因制备D-氨基酸的关键%Ratio of hydantoinase and N-carbamoylase: key to preparation of D-amino acid from 5-monosubstituted hydantoin

    Institute of Scientific and Technical Information of China (English)

    姚忠; 竺凯; 周华; 韦萍; 欧阳平凯

    2005-01-01

    The optically active D-amino areas are valuable intermediates for the production of semi-synthetic antibiotics; hormones, bioactive peptides, and 5-monosubstituted hydantoins are important precursors for the commercial production of aminoacids. Two enzymes are involved in the stereo-selective deavage of D, L-S-monosubstituted hydantoins and N-carbamoyl amino acid (Fig. 1).

  7. New polyamides based on 1,3-bis(4-carboxy phenoxy propane and hydantoin derivatives: synthesis and properties

    Directory of Open Access Journals (Sweden)

    Khalil Faghihi

    2010-04-01

    Full Text Available Six new polyamides 5a-f containing flexible trimethylene segments in the main chain were synthesized through the direct polycondensation reaction of 1,3-bis(4-carboxy phenoxy propane 3 with six derivatives of hydantoins 5a-f in a medium consisting of N-methyl-2-pyrrolidone, triphenyl phosphite, calcium chloride and pyridine. The polycondensation reaction produced a series of novel polyamides in high yield with inherent viscosities between 0.30-0.47 dL/g. The resulted polymers were fully characterized by means of FT-IR, 1H-NMR spectroscopy, elemental analyses, inherent viscosity, solubility tests and gel permeation chromatography (GPC. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA and differential thermal gravimetry (DTG. The glass-transition temperatures of these polyamides were recorded between 130 and 155 oC by differential scanning calorimetry (DSC, and the 5% weight loss temperatures were ranging from 325 to 415 oC under nitrogen. 1,3-bis(4-Carboxy phenoxy propane 3 was prepared from the reaction of 4-hydroxy benzoic acid 1 with 1,3-dibromo propane 2 in the presence of NaOH solution.

  8. Rapid Synthesis of New Poly(amide-imide)s Based on N-(4-Carboxy phenyl) trimellitimide and Hydantoin Derivatives under Microwave Irradiation

    OpenAIRE

    GHOLIZADEH, Khalil FAGHIHI and Mohammad

    2009-01-01

    Six new poly (amide-imide)s (6a-f) were prepared under microwave irradiation by polycondensation reaction of diacid chloride (4) with 6 different derivatives of hydantoins (5a-f) using O-cresol as a microwave absorbent. These new PAIs were obtained in high yield and with inherent viscosities between 0.15 and 0.25 dL/g. The resulting poly(amide-imide)s were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA & DTG), solubility test, and F...

  9. New optically active poly(amide-imide)s derived from N,N'-(4,4-diphthaloyl)-bis-L-leucine and hydantoin derivatives: Synthesis and properties

    Institute of Scientific and Technical Information of China (English)

    Khalil Faghihi

    2009-01-01

    Six new optically active poly(amide-imide)s (5a-f) were synthesized through the direct polycondensation reaction of N,N'-(4,4'-diphthaloyl)-bis-L-leucine (3) with six hydantoin derivatives (4a-f). Triphenyl phosphlte (TPP)/pyridine in the presence of calcium chloride (CaCl_2) and N-methyl-2-pyrrolidone (NMP) were successfully applied for direct polycondensation. The polycondensation reactions produce a series of new poly(amide-imide)s (Sa-f) in high yields, and inherent viscosity between 0.42 and 0.55 dL/g. The resulting poly(amide-imide)s (Sa-f) were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test and FT-IR spectroscopy.

  10. Improved Dielectric Properties and Energy Storage Density of Poly(vinylidene fluoride-co-hexafluoropropylene) Nanocomposite with Hydantoin Epoxy Resin Coated BaTiO3.

    Science.gov (United States)

    Luo, Hang; Zhang, Dou; Jiang, Chao; Yuan, Xi; Chen, Chao; Zhou, Kechao

    2015-04-22

    Energy storage materials are urgently demanded in modern electric power supply and renewable energy systems. The introduction of inorganic fillers to polymer matrix represents a promising avenue for the development of high energy density storage materials, which combines the high dielectric constant of inorganic fillers with supernal dielectric strength of polymer matrix. However, agglomeration and phase separation of inorganic fillers in the polymer matrix remain the key barriers to promoting the practical applications of the composites for energy storage. Here, we developed a low-cost and environmentally friendly route to modifying BaTiO3 (BT) nanoparticles by a kind of water-soluble hydantoin epoxy resin. The modified BT nanoparticles exhibited homogeneous dispersion in the ferroelectric polymer poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) matrix and strong interfacial adhesion with the polymer matrix. The dielectric constants of the nanocomposites increased significantly with the increase of the coated BT loading, while the dielectric loss of the nanocomposites was still as low as that of the pure P(VDF-HFP). The energy storage density of the nanocomposites was largely enhanced with the coated BT loading at the same electric field. The nanocomposite with 20 vol % BT exhibited an estimated maximum energy density of 8.13 J cm(-3), which was much higher than that of pure P(VDF-HFP) and other dielectric polymers. The findings of this research could provide a feasible approach to produce high energy density materials for practical application in energy storage.

  11. RAPID SYNTHESIS OF NOVEL OPTICALLY ACTIVE POLY(AMIDE-IMIDE)S DERIVED FROM N,N'-(PYROMELLITOYL)-BIS-L-ALANINE DIACID CHLORIDE AND HYDANTOIN DERIVATIVES UNDER MICROWAVE IRRADIATION

    Institute of Scientific and Technical Information of China (English)

    Khalil Faghihi; Azizollah Mirsamie

    2005-01-01

    Eight novel poly(amide-imide)s were synthesized under microwave irradiation by using a domestic microwave oven from the polycondensation reactions of N,N'-(pyromellitoyl)-bis-L-alanine diacid chloride (1) with eight different derivatives of hydantoin compounds (2a-h) in the presence of a small amount of a polar organic medium such as o-cresol.The polycondensation proceeded rapidly, compared with the conventional solution polycondensation and was completed within 8-10 min, producing a series of new poly(amide-imide)s (3a-h) with inherent viscosities about 0.35-0.68 dL/g in high yields. The obtained PAIs (3a-h) were fully characterized by means of FT-IR spectroscopy, elemental analyses, inherent viscosity (ηinh), solubility and specific rotation measurements. All of the resulting polymers show optical rotation and are optically active. Thermal properties of the poly(amide-imide)s were investigated by using thermal gravimetric analysis(TGA).

  12. Gravitational induction

    CERN Document Server

    Bini, Donato; Chicone, Carmen; Mashhoon, Bahram

    2008-01-01

    We study the linear post-Newtonian approximation to general relativity known as gravitoelectromagnetism (GEM); in particular, we examine the similarities and differences between GEM and electrodynamics. Notwithstanding some significant differences between them, we find that a special nonstationary metric in GEM can be employed to show {\\it explicitly} that it is possible to introduce gravitational induction within GEM in close analogy with Faraday's law of induction and Lenz's law in electrodynamics. Some of the physical implications of gravitational induction are briefly discussed.

  13. Inductive reasoning.

    Science.gov (United States)

    Hayes, Brett K; Heit, Evan; Swendsen, Haruka

    2010-03-01

    Inductive reasoning entails using existing knowledge or observations to make predictions about novel cases. We review recent findings in research on category-based induction as well as theoretical models of these results, including similarity-based models, connectionist networks, an account based on relevance theory, Bayesian models, and other mathematical models. A number of touchstone empirical phenomena that involve taxonomic similarity are described. We also examine phenomena involving more complex background knowledge about premises and conclusions of inductive arguments and the properties referenced. Earlier models are shown to give a good account of similarity-based phenomena but not knowledge-based phenomena. Recent models that aim to account for both similarity-based and knowledge-based phenomena are reviewed and evaluated. Among the most important new directions in induction research are a focus on induction with uncertain premise categories, the modeling of the relationship between inductive and deductive reasoning, and examination of the neural substrates of induction. A common theme in both the well-established and emerging lines of induction research is the need to develop well-articulated and empirically testable formal models of induction. Copyright © 2010 John Wiley & Sons, Ltd. For further resources related to this article, please visit the WIREs website.

  14. Identification and separation of the organic compounds in coal-gasification condensate waters. [5,5 dimethyl hydantoin, dihydroxy benzenes, acetonitrile

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, D.H. Jr.; King, C.J.

    1983-08-01

    A substantial fraction of the organic solutes in condensate waters from low-temperature coal-gasification processes are not identified by commonly employed analytical techniques, have low distriution coefficients (K/sub C/) into diisopropyl ether (DIPE) or methyl isobutyl ketone (MIBK), and are resistant to biological oxidation. These compounds represent an important wastewater-treatment problem. Analytical techniques were developed to detect these polar compounds, and the liquid-liquid phase equilibria were measured with several solvents. A high-performance liquid - chromatography (HPLC) technique was employed to analyze four condensate-water samples from a slagging fixed-bed gasifier. A novel sample-preparation technique, consisting of an azeotropic distillation with isopropanol, allowed identification of compounds in the HPLC eluant by combined gas chromatography and mass spectrometry. 5,5-dimethyl hydantoin and related compounds were identified in condensate waters for the first time, and they account for 1 to 6% of the chemical oxygen demand (COD). Dimethyl hydatoin has a K/sub D/ of 2.6 into tributyl phosphate (TBP) and much lower K/sub D/ values into six other solvents. It is also resistant to biological oxidation. Phenols (59 to 76% of the COD), dihydroxy benzenes (0.02 to 9.5% of the COD), and methanol, acetonitrile, and acetone (15% of the COD in one sample) were also detected. Extraction with MIBK removed about 90% of the COD. MIBK has much higher K/sub D/ values than DIPE for dihydroxy benzenes. Chemical reactions occurred during storage of condensate-water samples. The reaction products had low K/sub D/ values into MIBK. About 10% of the COD had a K/sub D/ of nearly zero into MIBK. These compounds were not extracted by MIBK over a wide range of pH. 73 references, 6 figures, 35 tables.

  15. Inductive Learning

    Institute of Scientific and Technical Information of China (English)

    吴信东

    1993-01-01

    Machine learning(ML)is a major subfield of artificial intelligence(AI).It has been seen as a feasible way of avoiding the knowledge bottleneck problem in knowledge-based systems development.Research on ML has concentrated in the main on inductive learning,a paradigm for inducing rules from unordered sets of exmaples.AQ11 and ID3,the two most widespred algorithms in ML,are both inductive.This paper first summarizes AQ11,ID3 and the newly-developed extension matrix approach based HCV algorithm;and then reviews the recent development of inductive learing and automatic knowledge acquisition from data bases.

  16. Practicing induction:

    DEFF Research Database (Denmark)

    Sprogøe, Jonas; Rohde, Nicolas

    2009-01-01

    We claim that induction potentially triggers both individual and organizational learning and by drawing on practice-based theory we discuss how the interplay between individual and organization, what we call a generative dance, ignites both kinds of learning....

  17. Gravitational induction

    OpenAIRE

    Bini, Donato; Cherubini, Christian; Chicone, Carmen; Mashhoon, Bahram

    2008-01-01

    We study the linear post-Newtonian approximation to general relativity known as gravitoelectromagnetism (GEM); in particular, we examine the similarities and differences between GEM and electrodynamics. Notwithstanding some significant differences between them, we find that a special nonstationary metric in GEM can be employed to show {\\it explicitly} that it is possible to introduce gravitational induction within GEM in close analogy with Faraday's law of induction and Lenz's law in electrod...

  18. Induction Brazing

    DEFF Research Database (Denmark)

    Henningsen, Poul

    . The method has proven to give successful results in brazing tube-plate joints of copper-brass, copper-stainless steel, stainless steel-brass, and stainless steel-stainless steel. A new design of an adjustable flux concentrator for induction heating tube-to-plate joints is proposed and tested on a variety......Induction brazing is a fast and appropriate method for industrial joining of complex geometries and metal combinations. In all types of brazing processes it is important to heat the joint interface of the two materials to the same, high temperature. If one of the specimens is warmer than the other...... materials has large influence on the heating time and temperature distribution in induction heating. In order to ensure high and uniform temperature distribution near the interface of a joint between dissimilar materials the precise coil geometry and position is of great importance. The present report...

  19. Induction practice -

    DEFF Research Database (Denmark)

    Rohde, Nicolas; Sprogøe, Jonas

    2007-01-01

    that induction potentially triggers both individual and organizational learning and by drawing on practice-based theory we discuss how the interplay between individual and the organization, what we call agenerative dance, ignites both kinds of learning. We focus on and describe the interplay , ignites both kinds...... of learning. We focus on and describe the interplay that takes place in particular induction events and analyze the "dance" through the lens of learning. The paper concludes with a brief discussion about the implications for practitioners and the challenges and future research prospects we have encountered....... We draw on an empirical enquiry in two organizational settings, a Danish management consulting company and a German retail bank....

  20. Induction Brazing

    DEFF Research Database (Denmark)

    Henningsen, Poul

    , or if the hottest area is located outside the joint interface, a number of defects may appear: the braze metal may flow away from the joint, the flux may burn off, poor binding of the braze metal may appear or the braze metal may be overheated. Joint geometry as well as electro-magnetic properties of the work piece......Induction brazing is a fast and appropriate method for industrial joining of complex geometries and metal combinations. In all types of brazing processes it is important to heat the joint interface of the two materials to the same, high temperature. If one of the specimens is warmer than the other...

  1. Lexicographic Path Induction

    DEFF Research Database (Denmark)

    Schürmann, Carsten; Sarnat, Jeffrey

    2009-01-01

    Programming languages theory is full of problems that reduce to proving the consistency of a logic, such as the normalization of typed lambda-calculi, the decidability of equality in type theory, equivalence testing of traces in security, etc. Although the principle of transfinite induction...... an induction principle that combines the comfort of structural induction with the expressive strength of transfinite induction. Using lexicographic path induction, we give a consistency proof of Martin-Löf’s intuitionistic theory of inductive definitions. The consistency of Heyting arithmetic follows directly...

  2. Inductive Monitoring System (IMS)

    Data.gov (United States)

    National Aeronautics and Space Administration — IMS: Inductive Monitoring System The Inductive Monitoring System (IMS) is a tool that uses a data mining technique called clustering to extract models of normal...

  3. Inductive situation calculus

    OpenAIRE

    Denecker, Marc; Ternovska, Eugenia

    2004-01-01

    Temporal reasoning has always been a major test case for knowledge representation formalisms. In this paper, we develop an inductive variant of the situation calculus in ED-logic, classical logic extended with inductive definitions. This logic has been proposed recently and is an extension of classical logic. It allows for a uniform representation of various forms of definitions, including monotone inductive definitions and non-monotone forms of inductive definitions such as iterated inductio...

  4. Hypotheses and Inductive Predictions

    NARCIS (Netherlands)

    ROMEYN, J.-W.

    2008-01-01

    ABSTRACT. This paper studies the use of hypotheses schemes in generating inductive predictions. After discussing Carnap–Hintikka inductive logic, hypotheses schemes are defined and illustrated with two partitions. One partition results in the Carnapian continuum of inductive methods, the other resul

  5. Hypotheses and Inductive Predictions

    NARCIS (Netherlands)

    ROMEYN, J.-W.

    2008-01-01

    ABSTRACT. This paper studies the use of hypotheses schemes in generating inductive predictions. After discussing Carnap–Hintikka inductive logic, hypotheses schemes are defined and illustrated with two partitions. One partition results in the Carnapian continuum of inductive methods, the other resul

  6. Inductive Reasoning and Writing

    Science.gov (United States)

    Rooks, Clay; Boyd, Robert

    2003-01-01

    Induction, properly understood, is not merely a game, nor is it a gimmick, nor is it an artificial way of explaining an element of reasoning. Proper understanding of inductive reasoning--and the various types of reasoning that the authors term inductive--enables the student to evaluate critically other people's writing and enhances the composition…

  7. Induction machine handbook

    CERN Document Server

    Boldea, Ion

    2002-01-01

    Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on induction machines.The Induction Machine Handbook fills industry's long-standing need for a comprehensive treatise embracing the many intricate facets of induction machine analysis and design. Moving gradually from simple to complex and from standard to

  8. Inductive Logic and Statistics

    NARCIS (Netherlands)

    Romeijn, J. -W.

    2009-01-01

    This chapter concerns inductive logic in relation to mathematical statistics. I start by introducing a general notion of probabilistic induc- tive inference. Then I introduce Carnapian inductive logic, and I show that it can be related to Bayesian statistical inference via de Finetti's representatio

  9. Progress in Induction Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Caporaso, G J

    2000-09-27

    This presentation will be a broad survey of progress in induction technology over the past four years. Much work has been done on accelerators for hydrodynamic test radiography and other applications. Solid-state pulsers have been developed which can provide unprecedented flexibility and precision in pulse format and accelerating voltage for both ion and electron induction machines. Induction linacs can now be built which can operate with MHz repetition rates. Solid-state technology has also made possible the development of fast kickers for precision control of high current beams. New insulator technology has been developed which will improve conventional induction linacs in addition to enabling a new class of high gradient induction linacs.

  10. Inductance loop and partial

    CERN Document Server

    Paul, Clayton R

    2010-01-01

    "Inductance is an unprecedented text, thoroughly discussing "loop" inductance as well as the increasingly important "partial" inductance. These concepts and their proper calculation are crucial in designing modern high-speed digital systems. World-renowned leader in electromagnetics Clayton Paul provides the knowledge and tools necessary to understand and calculate inductance." "With the present and increasing emphasis on high-speed digital systems and high-frequency analog systems, it is imperative that system designers develop an intimate understanding of the concepts and methods in this book. Inductance is a much-needed textbook designed for senior and graduate-level engineering students, as well as a hands-on guide for working engineers and professionals engaged in the design of high-speed digital and high-frequency analog systems."--Jacket.

  11. Direct reading inductance meter

    Science.gov (United States)

    Kolby, R. B. (Inventor)

    1977-01-01

    A direct reading inductance meter comprised of a crystal oscillator and an LC tuned oscillator is presented. The oscillators function respectively to generate a reference frequency, f(r), and to generate an initial frequency, f(0), which when mixed produce a difference equal to zero. Upon connecting an inductor of small unknown value in the LC circuit to change its resonant frequency to f(x), a difference frequency (f(r)-f(x)) is produced that is very nearly a linear function of the inductance of the inductor. The difference frequency is measured and displayed on a linear scale in units of inductance.

  12. Induction motor control design

    CERN Document Server

    Marino, Riccardo; Verrelli, Cristiano M

    2010-01-01

    ""Nonlinear and Adaptive Control Design for Induction Motors"" is a unified exposition of the most important steps and concerns in the design of estimation and control algorithms for induction motors. A single notation and modern nonlinear control terminology is used to make the book accessible to readers who are not experts in electric motors at the same time as giving a more theoretical control viewpoint to those who are. In order to increase readability, the book concentrates on the induction motor, eschewing the much more complex and less-well-understood control of asynchronous motors. The

  13. Properties of inductive reasoning.

    Science.gov (United States)

    Heit, E

    2000-12-01

    This paper reviews the main psychological phenomena of inductive reasoning, covering 25 years of experimental and model-based research, in particular addressing four questions. First, what makes a case or event generalizable to other cases? Second, what makes a set of cases generalizable? Third, what makes a property or predicate projectable? Fourth, how do psychological models of induction address these results? The key results in inductive reasoning are outlined, and several recent models, including a new Bayesian account, are evaluated with respect to these results. In addition, future directions for experimental and model-based work are proposed.

  14. Electromagnetic induction in Australia

    Science.gov (United States)

    Lilley, F. E. M.

    Electromagnetic induction at the terrestrial surface is a general and ubiquitous process. This note, which covers research on the subject in Australia, reflects the writer's own interest and refers particularly to induction by natural source fields in the period range of 1 minute to 1 day.Such source fields arise external to Earth, in the ionosphere and beyond, in the magnetosphere. The process of electromagnetic induction by these fields involves the flow through Earth of tens of thousands of amperes, over scale lengths of thousands of kilometers.

  15. Making Mathematical Induction Meaningful

    Science.gov (United States)

    Hirsch, Christian R.

    1976-01-01

    The author argues that the "least number principle" (well-ordering for positive integers) is more intuitively acceptable to high school students than mathematical induction which can be derived from it. (SD)

  16. Thermal kinetic inductance detector

    Energy Technology Data Exchange (ETDEWEB)

    Cecil, Thomas; Gades, Lisa; Miceli, Antonio; Quaranta, Orlando

    2016-12-20

    A microcalorimeter for radiation detection that uses superconducting kinetic inductance resonators as the thermometers. The detector is frequency-multiplexed which enables detector systems with a large number of pixels.

  17. Induction heating coupler

    Science.gov (United States)

    Fox, Robert L. (Inventor); Copeland, Carl E. (Inventor); Swaim, Robert J. (Inventor); Coultrip, Robert H. (Inventor); Johnston, David F. (Inventor); Phillips, W. Morris (Inventor); Johnson, Samuel D. (Inventor); Dinkins, James R. (Inventor); Buckley, John D. (Inventor)

    1994-01-01

    An induction heating device includes a handle having a hollow interior and two opposite ends, a wrist connected to one end of the handle, a U-shaped pole piece having two spaced apart ends, a tank circuit including an induction coil wrapped around the pole piece and a capacitor connected to the induction coil, a head connected to the wrist and including a housing for receiving the U-shaped pole piece, the two spaced apart ends of the pole piece extending outwardely beyond the housing, and a power source connected to the tank circuit. When the tank circuit is energized and a susceptor is placed in juxtaposition to the ends of the U-shaped pole piece, the susceptor is heated by induction heating due to magnetic flux passing between the two ends of the pole piece.

  18. Unification By Induction

    CERN Document Server

    Adewole, A I A

    2001-01-01

    We show that the problem of unifying electromagnetism with gravity has an elegant solution in classical physics through the phenomenon of induction. By studying the way that induction leads to the formation of electromagnetic fields, we identify the classical field equations which the unified field must satisfy and a corresponding set of constitutive equations for the medium sustaining the field. The unification problem is then reduced to the problem of finding the exact form of these constitutive equations for different media by experiments.

  19. Induction of the Proepicardium.

    Science.gov (United States)

    Maya-Ramos, Lisandro; Cleland, James; Bressan, Michael; Mikawa, Takashi

    2013-09-01

    The proepicardium is a transient extracardiac embryonic tissue that gives rise to the epicardium and a number of coronary vascular cell lineages. This important extracardiac tissue develops through multiple steps of inductive events, from specification of multiple cell lineages to morphogenesis. This article will review our current understanding of inductive events involved in patterning of the proepicardium precursor field, specification of cell types within the proepicardium, and their extension and attachment to the heart.

  20. Induction of the Proepicardium

    Directory of Open Access Journals (Sweden)

    Takashi Mikawa

    2013-07-01

    Full Text Available The proepicardium is a transient extracardiac embryonic tissue that gives rise to the epicardium and a number of coronary vascular cell lineages. This important extracardiac tissue develops through multiple steps of inductive events, from specification of multiple cell lineages to morphogenesis. This article will review our current understanding of inductive events involved in patterning of the proepicardium precursor field, specification of cell types within the proepicardium and their extension and attachment to the heart.

  1. Diophantine Correct Open Induction

    CERN Document Server

    Raffer, Sidney

    2010-01-01

    We give an induction-free axiom system for diophantine correct open induction. We relate the problem of whether a finitely generated ring of Puiseux polynomials is diophantine correct to a problem about the value-distribution of a tuple of semialgebraic functions with integer arguments. We use this result, and a theorem of Bergelson and Leibman on generalized polynomials, to identify a class of diophantine correct subrings of the field of descending Puiseux series with real coefficients.

  2. Induction Heating Systems

    Science.gov (United States)

    1991-01-01

    Induction heating technology, a magnetic non-deforming process, was developed by Langley researchers to join plastic and composite components in space. Under NASA license, Inductron Corporation uses the process to produce induction heating systems and equipment for numerous applications. The Torobonder, a portable system, comes with a number of interchangeable heads for aircraft repair. Other developments are the E Heating Head, the Toroid Joining Gun, and the Torobrazer. These products perform bonding applications more quickly, safely and efficiently than previous methods.

  3. Adsorption of Hydantoins on Activated Carbon,

    Science.gov (United States)

    1985-05-01

    covery, Garten and Weiss (1965) proposed the existence of chromene (benzpyran) groups on the surface of H-carbons. The acid reaction with the chromene ...presence of the chromene groups on the surface of H-carbons is responsible for the acid-adsorbing characteristics. Activation temperatures and

  4. Refining Inductive Types

    CERN Document Server

    Atkey, Robert; Ghani, Neil

    2012-01-01

    Dependently typed programming languages allow sophisticated properties of data to be expressed within the type system. Of particular use in dependently typed programming are indexed types that refine data by computationally useful information. For example, the N-indexed type of vectors refines lists by their lengths. Other data types may be refined in similar ways, but programmers must produce purpose-specific refinements on an ad hoc basis, developers must anticipate which refinements to include in libraries, and implementations must often store redundant information about data and their refinements. In this paper we show how to generically derive inductive characterisations of refinements of inductive types, and argue that these characterisations can alleviate some of the aforementioned difficulties associated with ad hoc refinements. Our characterisations also ensure that standard techniques for programming with and reasoning about inductive types are applicable to refinements, and that refinements can the...

  5. Modeling Induction Motor Imbalances

    DEFF Research Database (Denmark)

    Armah, Kabenla; Jouffroy, Jerome; Duggen, Lars

    2016-01-01

    This paper gives a study into the development of a generalized model for a three-phase induction motor that offers flexibility of simulating balanced and unbalanced parameter scenarios. By analyzing the interaction of forces within the motor, we achieve our main objective of deriving the system...

  6. Learning and Inductive Inference

    Science.gov (United States)

    1982-07-01

    is also a paradigm example of induction as discussed by philosophers ( Carnap , 1950). Data compression is of practical value for storage and...IBelser, A. 0. Hlolzman, and A. Kent (Eds.., Eneyclopedia of computer science and technology (Vol. II). New York: Marcel Dekker, 24 51. " Carnap , R. 1950

  7. Iteration, Not Induction

    Science.gov (United States)

    Dobbs, David E.

    2009-01-01

    The main purpose of this note is to present and justify proof via iteration as an intuitive, creative and empowering method that is often available and preferable as an alternative to proofs via either mathematical induction or the well-ordering principle. The method of iteration depends only on the fact that any strictly decreasing sequence of…

  8. Teaching Mathematical Induction I.

    Science.gov (United States)

    Dubinsky, Ed

    1986-01-01

    A novel approach to teaching mathematical induction was used, based on a Piagetian theory of learning abstract mathematical concepts in which the learner uses reflective abstraction to construct new schemas out of old ones. Computer experiences are used to induce students to make the appropriate reflective abstractions. (MNS)

  9. Using Continuity Induction

    Science.gov (United States)

    Hathaway, Dan

    2011-01-01

    Here is a technique for proving the fundamental theorems of analysis that provides a unified way to pass from local properties to global properties on the real line, just as ordinary induction passes from local implication (if true for "k", the theorem is true for "k" + 1) to a global conclusion in the natural numbers.

  10. Training in Inductive Reasoning.

    Science.gov (United States)

    Tomic, Welko

    This study investigated the effects of K. J. Klauer's (1989) inductive reasoning training program of teaching children. Effects of training and the range of transfer of the training were assessed. The subjects were 34 third-grade Dutch children of average ability, matched on age, sex, and IQ. Children from the training condition (N=17) received…

  11. Decision Procedures for Proving Inductive Theorems without Induction

    OpenAIRE

    Aoto, Takahito; Stratulat, Sorin

    2014-01-01

    International audience; Automated inductive reasoning for term rewriting has been extensively studied in the literature. Classes of equations and term rewriting systems (TRSs) with decidable inductive validity have been identified and used to automatize the inductive reasoning. We give procedures for deciding the inductive validity of equations in some standard TRSs on natural numbers and lists. Contrary to previous decidability results, our procedures can automatically decide without involvi...

  12. Measurement of Self-Inductance.

    Science.gov (United States)

    Mak, S. Y.; Tao, P. K.

    1988-01-01

    Discusses four different methods for measuring self-inductance based on the definition of inductance, the alternative definition, phase difference and LC resonance. Provides circuit diagrams and typical oscilloscope traces. (YP)

  13. Mathematical Induction: A Pedagogical Discussion.

    Science.gov (United States)

    Ernest, Paul

    1984-01-01

    Discusses the nature of mathematical induction and what constitutes a correct proof by this method and common misconceptions of induction with recommendations for their remediation. The topic is also analyzed into behavioral skills and subjected to a conceptual analysis. Criteria for analyzing and evaluating textbook treatment of induction are…

  14. Inductive Reasoning: A Training Approach

    Science.gov (United States)

    Klauer, Karl Josef; Phye, Gary D.

    2008-01-01

    Researchers have examined inductive reasoning to identify different cognitive processes when participants deal with inductive problems. This article presents a prescriptive theory of inductive reasoning that identifies cognitive processing using a procedural strategy for making comparisons. It is hypothesized that training in the use of the…

  15. Induction motor control

    Science.gov (United States)

    Hansen, Irving G.

    Electromechanical actuators developed to date have commonly ultilized permanent magnet (PM) synchronous motors. More recently switched reluctance (SR) motors have been advocated due to their robust characteristics. Implications of work which utilized induction motors and advanced control techniques are discussed. When induction motors are operated from an energy source capable of controlling voltages and frequencies independently, drive characteristics are obtained which are superior to either PM or SR motors. By synthesizing the machine frequency from a high-frequency carrier (nominally 20 kHz), high efficiencies, low distortion, and rapid torque response are available. At this time multiple horsepower machine drives were demonstrated, and work is on-going to develop a 20 hp average, 40 hp peak class of aerospace actuators. This effort is based upon high-frequency power distribution and management techniques developed by NASA for Space Station Freedom.

  16. Inductive Supervised Quantum Learning

    Science.gov (United States)

    Monràs, Alex; Sentís, Gael; Wittek, Peter

    2017-05-01

    In supervised learning, an inductive learning algorithm extracts general rules from observed training instances, then the rules are applied to test instances. We show that this splitting of training and application arises naturally, in the classical setting, from a simple independence requirement with a physical interpretation of being nonsignaling. Thus, two seemingly different definitions of inductive learning happen to coincide. This follows from the properties of classical information that break down in the quantum setup. We prove a quantum de Finetti theorem for quantum channels, which shows that in the quantum case, the equivalence holds in the asymptotic setting, that is, for large numbers of test instances. This reveals a natural analogy between classical learning protocols and their quantum counterparts, justifying a similar treatment, and allowing us to inquire about standard elements in computational learning theory, such as structural risk minimization and sample complexity.

  17. Induction motor control

    Science.gov (United States)

    Hansen, Irving G.

    1990-01-01

    Electromechanical actuators developed to date have commonly ultilized permanent magnet (PM) synchronous motors. More recently switched reluctance (SR) motors have been advocated due to their robust characteristics. Implications of work which utilized induction motors and advanced control techniques are discussed. When induction motors are operated from an energy source capable of controlling voltages and frequencies independently, drive characteristics are obtained which are superior to either PM or SR motors. By synthesizing the machine frequency from a high-frequency carrier (nominally 20 kHz), high efficiencies, low distortion, and rapid torque response are available. At this time multiple horsepower machine drives were demonstrated, and work is on-going to develop a 20 hp average, 40 hp peak class of aerospace actuators. This effort is based upon high-frequency power distribution and management techniques developed by NASA for Space Station Freedom.

  18. Inductively commutated coilguns

    Energy Technology Data Exchange (ETDEWEB)

    Mongeau, P.P. (EML Research, Inc., Hudson, MA (US))

    1991-01-01

    In this paper the concept and relevance of power factor is presented in regards to high performance launchers. As the scale of launchers grows and as efforts to improve efficiency continue power factor considerations will become crucial in engineering design and ultimate launcher performance limits. The use of motion induced commutation to improve the power factor are discussed. Various approaches to inductive commutation are presented, including: the brush-commutated 9 MJ Coilgun, the solid state-switched coilgun and the quenchgun.

  19. Inductively commutated coilguns

    Science.gov (United States)

    Mongeau, Peter P.

    1991-01-01

    The concept and relevance of power factor is presented in the context of high-performance launchers. As the scale of launchers grows and efforts to improve efficiency continue, power factor considerations will become crucial in engineering design and ultimate launcher performance limits. The use of motion-induced commutation to improve the power factor are discussed. Various approaches to inductive commutation are presented, including the brush-commutated 9-MJ coilgun, the solid state-switched coilgun, and the quenchgun.

  20. A taxonomy of inductive problems.

    Science.gov (United States)

    Kemp, Charles; Jern, Alan

    2014-02-01

    Inductive inferences about objects, features, categories, and relations have been studied for many years, but there are few attempts to chart the range of inductive problems that humans are able to solve. We present a taxonomy of inductive problems that helps to clarify the relationships between familiar inductive problems such as generalization, categorization, and identification, and that introduces new inductive problems for psychological investigation. Our taxonomy is founded on the idea that semantic knowledge is organized into systems of objects, features, categories, and relations, and we attempt to characterize all of the inductive problems that can arise when these systems are partially observed. Recent studies have begun to address some of the new problems in our taxonomy, and future work should aim to develop unified theories of inductive reasoning that explain how people solve all of the problems in the taxonomy.

  1. Inductively Coupled Augmented Railgun

    CERN Document Server

    Bahder, Thomas B

    2011-01-01

    We derive the non-linear dynamical equations for an augmented electromagnetic railgun, whose augmentation circuit is inductively coupled to the gun circuit. We solve these differential equations numerically using example parameter values. We find a complicated interaction between the augmentation circuit, gun circuit, and mechanical degrees of freedom, leading to a complicated optimization problem. For certain values of parameters, we find that an augmented electromagnetic railgun has an armature kinetic energy that is 42% larger than the same railgun with no augmentation circuit. Optimizing the parameters may lead to further increase in performance.

  2. Low inductance gas switching.

    Energy Technology Data Exchange (ETDEWEB)

    Chavez, Ray; Harjes, Henry Charles III; Wallace, Zachariah; Elizondo, Juan E.

    2007-10-01

    The laser trigger switch (LTS) is a key component in ZR-type pulsed power systems. In ZR, the pulse rise time through the LTS is > 200 ns and additional stages of pulse compression are required to achieve the desired <100 ns rise time. The inductance of the LTS ({approx}500nH) in large part determines the energy transfer time through the switch and there is much to be gained in improving system performance and reducing system costs by reducing this inductance. The current path through the cascade section of the ZR LTS is at a diameter of {approx} 6-inches which is certainly not optimal from an inductance point of view. The LTS connects components of much greater diameter (typically 4-5 feet). In this LDRD the viability of switch concepts in which the diameter of cascade section is greatly increased have been investigated. The key technical question to be answered was, will the desired multi-channel behavior be maintained in a cascade section of larger diameter. This LDRD proceeded in 2 distinct phases. The original plan for the LDRD was to develop a promising switch concept and then design, build, and test a moderate scale switch which would demonstrate the key features of the concept. In phase I, a switch concept which meet all electrical design criteria and had a calculated inductance of 150 nH was developed. A 1.5 MV test switch was designed and fabrication was initiated. The LDRD was then redirected due to budgetary concerns. The fabrication of the switch was halted and the focus of the LDRD was shifted to small scale experiments designed to answer the key technical question concerning multi-channel behavior. In phase II, the Multi-channel switch test bed (MCST) was designed and constructed. The purpose of MCST was to provide a versatile, fast turn around facility for the study the multi-channel electrical breakdown behavior of a ZR type cascade switch gap in a parameter space near that of a ZR LTS. Parameter scans on source impedance, gap tilt, gap spacing and

  3. Induction motor starting current

    Energy Technology Data Exchange (ETDEWEB)

    Arneaud, J.M.; Langman, R.A. [Tasmania Univ., Hobart, TAS (Australia)

    1995-12-31

    Large errors may occur if leakage path saturation is neglected when reduced-voltage test results are used to predict the direct-on-line starting current of induction motors. The results of applying three existing and two new methods for starting current prediction are compared with test data from 52 motors. A quantitative assessment is made of the probable reduction in error that would be achieved by increasing the number of available sets of reduced-voltage, locked rotor test results or by including slot design data. Guidelines are given for selecting an appropriate predictive method. (author). 4 tabs., 1 fig., 6 refs.

  4. Pulsed inductive HF laser

    Energy Technology Data Exchange (ETDEWEB)

    Razhev, A M; Kargapol' tsev, E S [Institute of Laser Physics, Siberian Branch, Russian Academy of Sciences, Novosibirsk (Russian Federation); Churkin, D S; Demchuk, S V [Novosibirsk State University, Novosibirsk (Russian Federation)

    2016-03-31

    We report the results of experimentally investigated dependences of temporal, spectral and spatial characteristics of an inductive HF-laser generation on the pump conditions. Gas mixtures H{sub 2} – F{sub 2}(NF{sub 3} or SF6{sub 6}) and He(Ne) – H{sub 2} – F{sub 2}(NF{sub 3} or SF{sub 6}) were used as active media. The FWHM pulse duration reached 0.42 μs. This value corresponded to a pulsed power of 45 kW. For the first time, the emission spectrum of an inductive HF laser was investigated, which consisted of seven groups of bands with centres around the wavelengths of 2732, 2736, 2739, 2835, 2837, 2893 and 2913 nm. The cross section profile of the laser beam was a ring with a diameter of about 20 mm and width of about 5 mm. Parameters of laser operation in the repetitively pulsed regime were sufficiently stable. The amplitude instability of light pulses was no greater than 5% – 6%. (lasers)

  5. Vector control of induction machines

    CERN Document Server

    Robyns, Benoit

    2012-01-01

    After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, ""Vector Control of Induction Machines"" introduces the standard mathematical models for induction machines - whichever rotor technology is used - as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. ""Vector Control of Induction Machines"" suggests a unique approach aimed at reducing parameter sensitivity for

  6. Induction Linac Pulsers

    Energy Technology Data Exchange (ETDEWEB)

    Faltens, Andris

    2011-01-07

    The pulsers used in most of the induction linacs evolved from the very large body of work that was done in the U.S. and Great Britain during the development of the pulsed magnetron for radar. The radar modulators started at {approx}100 kW and reached >10 MW by 1945. A typical pulse length was 1 {mu}s at a repetition rate of 1,000 pps. A very comprehensive account of the modulator development is Pulse Generators by Lebacqz and Glasoe, one of the Radiation Laboratory Series. There are many permutations of possible modulators, two of the choices being tube type and line type. In earlier notes I wrote that technically the vacuum tube pulser met all of our induction linac needs, in the sense that a number of tubes, in series and parallel if required, could produce our pulses, regulate their voltage, be useable in feed-forward correctors, and provide a low source impedance. At a lower speed, an FET array is similar, and we have obtained and tested a large array capable of >10 MW switching. A modulator with an electronically controlled output only needs a capacitor for energy storage and in a switched mode can transfer the energy from the capacitor to the load at high efficiency. Driving a full size Astron induction core and a simulated resistive 'beam load' we achieved >50% efficiency. These electronically controlled output pulses can produce the pulses we desire but are not used because of their high cost. The second choice, the line type pulser, visually comprises a closing switch and a distributed or a lumped element transmission line. The typical switch cannot open or stop conducting after the desired pulse has been produced, and consequently all of the initially stored energy is dissipated. This approximately halves the efficiency, and the original cost estimating program LIACEP used this factor of two, even though our circuits are usually worse, and even though our inveterate optimists often omit it. The 'missing' energy is that which is

  7. Cooling by Thermodynamic Induction

    Science.gov (United States)

    Patitsas, S. N.

    2017-03-01

    A method is described for cooling conductive channels to below ambient temperature. The thermodynamic induction principle dictates that the electrically biased channel will cool if the electrical conductance decreases with temperature. The extent of this cooling is calculated in detail for both cases of ballistic and conventional transport with specific calculations for carbon nanotubes and conventional metals, followed by discussions for semiconductors, graphene, and metal-insulator transition systems. A theorem is established for ballistic transport stating that net cooling is not possible. For conventional transport, net cooling is possible over a broad temperature range, with the range being size-dependent. A temperature clamping scheme for establishing a metastable nonequilibrium stationary state is detailed and followed with discussion of possible applications to on-chip thermoelectric cooling in integrated circuitry and quantum computer systems.

  8. Cooling by Thermodynamic Induction

    Science.gov (United States)

    Patitsas, S. N.

    2016-11-01

    A method is described for cooling conductive channels to below ambient temperature. The thermodynamic induction principle dictates that the electrically biased channel will cool if the electrical conductance decreases with temperature. The extent of this cooling is calculated in detail for both cases of ballistic and conventional transport with specific calculations for carbon nanotubes and conventional metals, followed by discussions for semiconductors, graphene, and metal-insulator transition systems. A theorem is established for ballistic transport stating that net cooling is not possible. For conventional transport, net cooling is possible over a broad temperature range, with the range being size-dependent. A temperature clamping scheme for establishing a metastable nonequilibrium stationary state is detailed and followed with discussion of possible applications to on-chip thermoelectric cooling in integrated circuitry and quantum computer systems.

  9. Kinetic inductance magnetometer.

    Science.gov (United States)

    Luomahaara, Juho; Vesterinen, Visa; Grönberg, Leif; Hassel, Juha

    2014-09-10

    Sensing ultra-low magnetic fields has various applications in the fields of science, medicine and industry. There is a growing need for a sensor that can be operated in ambient environments where magnetic shielding is limited or magnetic field manipulation is involved. To this end, here we demonstrate a new magnetometer with high sensitivity and wide dynamic range. The device is based on the current nonlinearity of superconducting material stemming from kinetic inductance. A further benefit of our approach is of extreme simplicity: the device is fabricated from a single layer of niobium nitride. Moreover, radio frequency multiplexing techniques can be applied, enabling the simultaneous readout of multiple sensors, for example, in biomagnetic measurements requiring data from large sensor arrays.

  10. Bayesian Causal Induction

    CERN Document Server

    Ortega, Pedro A

    2011-01-01

    Discovering causal relationships is a hard task, often hindered by the need for intervention, and often requiring large amounts of data to resolve statistical uncertainty. However, humans quickly arrive at useful causal relationships. One possible reason is that humans use strong prior knowledge; and rather than encoding hard causal relationships, they encode beliefs over causal structures, allowing for sound generalization from the observations they obtain from directly acting in the world. In this work we propose a Bayesian approach to causal induction which allows modeling beliefs over multiple causal hypotheses and predicting the behavior of the world under causal interventions. We then illustrate how this method extracts causal information from data containing interventions and observations.

  11. Inductive Position Sensor

    Science.gov (United States)

    Youngquist, Robert C. (Inventor); Simmons, Stephen M. (Inventor)

    2015-01-01

    An inductive position sensor uses three parallel inductors, each of which has an axial core that is an independent magnetic structure. A first support couples first and second inductors and separate them by a fixed distance. A second support coupled to a third inductor disposed between the first and second inductors. The first support and second support are configured for relative movement as distance changes from the third inductor to each of the first and second inductors. An oscillating current is supplied to the first and second inductors. A device measures a phase component of a source voltage generating the oscillating current and a phase component of voltage induced in the third inductor when the oscillating current is supplied to the first and second inductors such that the phase component of the voltage induced overlaps the phase component of the source voltage.

  12. Electromagnetic induction studies

    Science.gov (United States)

    Hermance, J. F.

    1983-04-01

    Recent developments in electromagnetic induction studies of the lithosphere and the asthenosphere are reviewed. Attention is given to geoelectrical studies of active tectonic areas in terms of the major zones of crustal extension, the basin and range province along western regions of North America, and the Rio Grande rift. Studies have also been performed of tectonic activity around Iceland, the Salton Trough and Cerro Prieto, and the subduction zones of the Cascade Mountains volcanic belt, where magnetotelluric and geomagnetic variation studies have been done. Geomagnetic variations experiments have been reported in the Central Appalachians, and submarine electromagnetic studies along the Juan de Fuca ridge. Controlled source electromagnetic and dc resistivity investigations have been carried out in Nevada, Hawaii, and in the Adirondacks Mountains. Laboratory examinations on the conductivity of representative materials over a broad range of temperature, pressure, and chemistry are described.

  13. Inductive Electron Heating Revisited

    Science.gov (United States)

    Tuszewski, M.

    1996-11-01

    Inductively Coupled Plasmas (ICPs) have been studied for over a century. Recently, ICPs have been rediscovered by the multi-billion dollar semiconductor industry as an important class of high-density, low-pressure plasma sources suitable for the manufacture of next-generation integrated circuits. Present low-pressure ICP development is among the most active areas of plasma research. However, this development remains largely empirical, a prohibitively expensive approach for upcoming 300-mm diameter wafers. Hence, there is an urgent need for basic ICP plasma physics research, including experimental characterization and predictive numerical modeling. Inductive radio frequency (rf) power absorption is fundamental to the ICP electron heating and the resulting plasma transport but remains poorly understood. For example, recent experimental measurements and supporting fluid calculationsfootnote M. Tuszewski, Phys. Rev. Lett. 77 in press (1996) on a commercial deposition tool prototype show that the induced rf magnetic fields in the source can cause an order of magnitude reduction in plasma conductivity and in electron heating power density. In some cases, the rf fields penetrate through the entire volume of the ICP discharges while existing models that neglect the induced rf magnetic fields predict rf absorption in a thin skin layer near the plasma surface. The rf magnetic fields also cause more subtle changes in the plasma density and in the electron temperature spatial distributions. These data will be presented and the role of basic research in the applied world of semiconductor manufacturing will be discussed. ^*This research was conducted under the auspices of the U.S. DOE, supported by funds provided by the University of California for discretionary research by Los Alamos National Laboratory.

  14. A Student Teamwork Induction Protocol

    Science.gov (United States)

    Kamau, Caroline; Spong, Abigail

    2015-01-01

    Faulty group processes have harmful effects on performance but there is little research about intervention protocols to pre-empt them in higher education. This naturalistic experiment compared a control cohort with an inducted cohort. The inducted cohort attended a workshop, consultations, elected a leader and used tools (a group log and group…

  15. Sampling Assumptions in Inductive Generalization

    Science.gov (United States)

    Navarro, Daniel J.; Dry, Matthew J.; Lee, Michael D.

    2012-01-01

    Inductive generalization, where people go beyond the data provided, is a basic cognitive capability, and it underpins theoretical accounts of learning, categorization, and decision making. To complete the inductive leap needed for generalization, people must make a key "sampling" assumption about how the available data were generated.…

  16. From Inductive Reasoning to Proof

    Science.gov (United States)

    Yopp, David A.

    2009-01-01

    Mathematical proof is an expression of deductive reasoning (drawing conclusions from previous assertions). However, it is often inductive reasoning (conclusions drawn on the basis of examples) that helps learners form their deductive arguments, or proof. In addition, not all inductive arguments generate more formal arguments. This article draws a…

  17. Non-inductive current drive

    NARCIS (Netherlands)

    Westerhof, E.

    2012-01-01

    This lecture addresses the various ways of non-inductive current generation. In particular, the topics covered include the bootstrap current, RF current drive, neutral beam current drive, alternative methods, and possible synergies between different ways of non-inductive current generation.

  18. NON-INDUCTIVE CURRENT DRIVE

    NARCIS (Netherlands)

    Westerhof, E.

    2010-01-01

    This lecture addresses the various ways of non-inductive current generation. In particular, the topics covered include the bootstrap current, RF current drive, neutral beam current drive, alternative methods, and possible synergies between different ways of non-inductive current generation.

  19. Misoprostol for induction of labor.

    Science.gov (United States)

    Stephenson, Megan L; Wing, Deborah A

    2015-10-01

    Labor-induction rates have increased considerably in the United States as well as around the world. With up to half of all induced labors requiring cervical ripening, prostaglandins have been utilized to increase induction success and achieve vaginal delivery. Misoprostol, a synthetic prostaglandin E1 analog has the ability to mimic the changes of spontaneous labor and has been used off label for over 30 years as a labor-induction agent. In the following article, cervical ripening and induction of labor with misoprostol will be discussed. The risks and benefits of misoprostol for ripening and induction and routes of administration will be reviewed, as well as future directions and new developments for its use.

  20. Induction: The Early Years of Teaching.

    Science.gov (United States)

    Guyton, Edi; Davis, Douglas; Colarusso, Ron; Grainger, Barbara

    2002-01-01

    Addresses the need for induction programs for beginning teachers and discusses the theoretical and research support for them. Develops the notion of induction as a community responsibility and describes a university-school induction consortium, a university induction program, an induction program at a middle school, and the role of the principal…

  1. Induction: The Early Years of Teaching.

    Science.gov (United States)

    Guyton, Edi; Davis, Douglas; Colarusso, Ron; Grainger, Barbara

    2002-01-01

    Addresses the need for induction programs for beginning teachers and discusses the theoretical and research support for them. Develops the notion of induction as a community responsibility and describes a university-school induction consortium, a university induction program, an induction program at a middle school, and the role of the principal…

  2. Inductively generating Euler diagrams.

    Science.gov (United States)

    Stapleton, Gem; Rodgers, Peter; Howse, John; Zhang, Leishi

    2011-01-01

    Euler diagrams have a wide variety of uses, from information visualization to logical reasoning. In all of their application areas, the ability to automatically layout Euler diagrams brings considerable benefits. In this paper, we present a novel approach to Euler diagram generation. We develop certain graphs associated with Euler diagrams in order to allow curves to be added by finding cycles in these graphs. This permits us to build Euler diagrams inductively, adding one curve at a time. Our technique is adaptable, allowing the easy specification, and enforcement, of sets of well-formedness conditions; we present a series of results that identify properties of cycles that correspond to the well-formedness conditions. This improves upon other contributions toward the automated generation of Euler diagrams which implicitly assume some fixed set of well-formedness conditions must hold. In addition, unlike most of these other generation methods, our technique allows any abstract description to be drawn as an Euler diagram. To establish the utility of the approach, a prototype implementation has been developed.

  3. Antibody induction versus corticosteroid induction for liver transplant recipients

    DEFF Research Database (Denmark)

    Penninga, Luit; Wettergren, André; Wilson, Colin H

    2014-01-01

    BACKGROUND: Liver transplantation is an established treatment option for end-stage liver failure. To date, no consensus has been reached on the use of immunosuppressive T-cell specific antibody induction compared with corticosteroid induction of immunosuppression after liver transplantation....... OBJECTIVES: To assess the benefits and harms of T-cell specific antibody induction versus corticosteroid induction for prevention of acute rejection in liver transplant recipients. SEARCH METHODS: We searched The Cochrane Hepato-Biliary Group Controlled Trials Register, the Cochrane Central Register...... of Controlled Trials (CENTRAL), MEDLINE, EMBASE, Science Citation Index Expanded, and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) on 30 September 2013 together with reference checking, citation searching, contact with trial authors and pharmaceutical companies...

  4. Optimal control of induction heating processes

    CERN Document Server

    Rapoport, Edgar

    2006-01-01

    This book introduces new approaches to solving optimal control problems in induction heating process applications. Optimal Control of Induction Heating Processes demonstrates how to apply and use new optimization techniques for different types of induction heating installations. Focusing on practical methods for solving real engineering optimization problems, the text features a variety of specific optimization examples for induction heater modes and designs, particularly those used in industrial applications. The book describes basic physical phenomena in induction heating and induction

  5. Overview of Bearingless Induction Motors

    Directory of Open Access Journals (Sweden)

    Xiaodong Sun

    2014-01-01

    Full Text Available Bearingless induction motors combining functions of both torque generation and noncontact magnetic suspension together have attracted more and more attention in the past decades due to their definite advantages of compactness, simple structure, less maintenance, no wear particles, high rotational speed, and so forth. This paper overviews the key technologies of the bearingless induction motors, with emphasis on motor topologies, mathematical models, and control strategies. Particularly, in the control issues, the vector control, independent control, direct torque control, nonlinear decoupling control, sensorless control, and so forth are investigated. In addition, several possible development trends of the bearingless induction motors are also discussed.

  6. Induction of formaldehyde contact sensitivity

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Boman, A; Vølund, A

    1985-01-01

    intradermal induction with 0.65% formaldehyde; in Stockholm it was 84% after induction with 0.34%. The data from the two laboratories could be described by parallel displaced dose response curves suggesting that the guinea pig strain used in Stockholm was significantly more susceptible to formaldehyde than......, and formaldehyde 1% and 0.1% was used for challenge. The incidence of contact sensitivity depended on the intradermal, but not on the topical induction dose. Statistical analyses showed a non-monotonous (non-linear) dose response relationship. The estimated maximal sensitization rate in Copenhagen was 80% after...

  7. Functional interpretation and inductive definitions

    CERN Document Server

    Avigad, Jeremy

    2008-01-01

    Extending G\\"odel's \\emph{Dialectica} interpretation, we provide a functional interpretation of classical theories of positive arithmetic inductive definitions, reducing them to theories of finite-type functionals defined using transfinite recursion on well-founded trees.

  8. Mathematical Induction in the Classroom

    Science.gov (United States)

    Avital, Shmuel; Hansen, Rodney T.

    1976-01-01

    This paper discusses the process of investigating a mathematical situation, making conjectures, formulating an equation, then using mathematical induction to show the result is valid. Several examples appropriate for secondary school level are given. (DT)

  9. A Note on Mathematical Induction

    Science.gov (United States)

    Brumfiel, Charles

    1974-01-01

    A classic problem involving the "misuse" of mathematical induction is presented. The error in the "proof" is then exposed. The generalization of this problem is presented as a false theorem which should serve to highlight the error. (LS)

  10. Adjustable Induction-Heating Coil

    Science.gov (United States)

    Ellis, Rod; Bartolotta, Paul

    1990-01-01

    Improved design for induction-heating work coil facilitates optimization of heating in different metal specimens. Three segments adjusted independently to obtain desired distribution of temperature. Reduces time needed to achieve required temperature profiles.

  11. Induction heating coupler and annealer

    Science.gov (United States)

    Fox, Robert L. (Inventor); Johnson, Samuel D. (Inventor); Copeland, Carl E. (Inventor); Coultrip, Robert H. (Inventor); Phillips, W. Morris (Inventor); Johnston, David F. (Inventor); Swaim, Robert J. (Inventor); Dinkins, James R. (Inventor)

    1994-01-01

    An induction heating device includes a handle having a hollow interior and two opposite ends, a wrist connected to one end of the handle, a U-shaped pole piece having- two spaced apart ends, a tank circuit including an induction coil wrapped around the pole piece and a capacitor connected to the induction coil, a head connected to the wrist and including a housing for receiving the U-shaped pole piece, the two spaced apart ends of the pole piece extending outwardly beyond the housing, and a power source connected to the tank circuit. When the tank circuit is energized and a susceptor is placed in juxtaposition to the ends of the U-shaped pole piece, the susceptor is heated by induction heating due to a magnetic flux passing between the two ends of the pole piece.

  12. ORGANIZATIONAL DEVELOPMENT ACTION: INDUCTION PROGRAM

    National Research Council Canada - National Science Library

    José G. VARGAS-HERNÁNDEZ

    2016-01-01

    .... Also, an induction program is presented as an intervention proposal of organization development, on the premise that this program is a first step in the solving of the existing low productivity problem...

  13. Inductance and hypergeometric functions. II

    DEFF Research Database (Denmark)

    Karlsson, Per W.

    2000-01-01

    A previously obtained integral for the self-inductance of a solenoid is further transformed. The resulting formula involves double Kampé de Fériet functions which are analytic continuations rather than power series.......A previously obtained integral for the self-inductance of a solenoid is further transformed. The resulting formula involves double Kampé de Fériet functions which are analytic continuations rather than power series....

  14. Automated Discovery of Inductive Theorems

    OpenAIRE

    McCasland, Roy; Bundy, Alan; Serge, Autexier

    2007-01-01

    Inductive mathematical theorems have, as a rule, historically been quite difficult to prove – both for mathematics students and for auto- mated theorem provers. That said, there has been considerable progress over the past several years, within the automated reasoning community, towards proving some of these theorems. However, little work has been done thus far towards automatically discovering them. In this paper we present our methods of discovering (as well as proving) inductive theorems, ...

  15. Inductive System Monitors Tasks

    Science.gov (United States)

    2008-01-01

    The Inductive Monitoring System (IMS) software developed at Ames Research Center uses artificial intelligence and data mining techniques to build system-monitoring knowledge bases from archived or simulated sensor data. This information is then used to detect unusual or anomalous behavior that may indicate an impending system failure. Currently helping analyze data from systems that help fly and maintain the space shuttle and the International Space Station (ISS), the IMS has also been employed by data classes are then used to build a monitoring knowledge base. In real time, IMS performs monitoring functions: determining and displaying the degree of deviation from nominal performance. IMS trend analyses can detect conditions that may indicate a failure or required system maintenance. The development of IMS was motivated by the difficulty of producing detailed diagnostic models of some system components due to complexity or unavailability of design information. Successful applications have ranged from real-time monitoring of aircraft engine and control systems to anomaly detection in space shuttle and ISS data. IMS was used on shuttle missions STS-121, STS-115, and STS-116 to search the Wing Leading Edge Impact Detection System (WLEIDS) data for signs of possible damaging impacts during launch. It independently verified findings of the WLEIDS Mission Evaluation Room (MER) analysts and indicated additional points of interest that were subsequently investigated by the MER team. In support of the Exploration Systems Mission Directorate, IMS is being deployed as an anomaly detection tool on ISS mission control consoles in the Johnson Space Center Mission Operations Directorate. IMS has been trained to detect faults in the ISS Control Moment Gyroscope (CMG) systems. In laboratory tests, it has already detected several minor anomalies in real-time CMG data. When tested on archived data, IMS was able to detect precursors of the CMG1 failure nearly 15 hours in advance of

  16. Antibody induction versus placebo, no induction, or another type of antibody induction for liver transplant recipients

    DEFF Research Database (Denmark)

    Penninga, Luit; Wettergren, André; Wilson, Colin H

    2014-01-01

    BACKGROUND: Liver transplantation is an established treatment option for end-stage liver failure. To date, no consensus has been reached on the use of immunosuppressive T-cell antibody induction for preventing rejection after liver transplantation. OBJECTIVES: To assess the benefits and harms...... of immunosuppressive T-cell specific antibody induction compared with placebo, no induction, or another type of T-cell specific antibody induction for prevention of acute rejection in liver transplant recipients. SEARCH METHODS: We searched The Cochrane Hepato-Biliary Group Controlled Trials Register, the Cochrane...... Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, Science Citation Index Expanded, and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) until September 2013. SELECTION CRITERIA: Randomised clinical trials assessing immunosuppression with T...

  17. Estimation of physical parameters in induction motors

    DEFF Research Database (Denmark)

    Børsting, H.; Knudsen, Morten; Rasmussen, Henrik

    1994-01-01

    Parameter estimation in induction motors is a field of great interest, because accurate models are needed for robust dynamic control of induction motors......Parameter estimation in induction motors is a field of great interest, because accurate models are needed for robust dynamic control of induction motors...

  18. Kinetic inductance measured in a superconducting wire

    Science.gov (United States)

    Meservey, R. H.; Tedrow, P. M.

    1970-01-01

    Ultrasensitive technique to measure kinetic inductance has test specimen included as part of the inductance of a tank circuit of a tunnel diode oscillator. Frequency counter measures shift in frequency of oscillator, caused by changes in inductance. Frequency shift in tank circuit is proportional to change in kinetic inductance

  19. On the internal structures of inductive types

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The paper investigates the internal structures of hereditary inductive types in logical type theory. By defining a bisimulation equality on the inhabitants of each hereditary inductive type, one is able to show that the inhabitants of a hereditary inductive type satisfy the basic properties of sets. A hereditary inductive type can therefore be conceived as a universe of sets.

  20. On generic representation of implicit induction procedures

    NARCIS (Netherlands)

    Naidich, D.

    1996-01-01

    We develop a generic representation of implicit induction proof procedures within the cover set induction framework. Our work further develops the approach of cover set induction on propositional orderings. We show that in order to represent a substantially wide range of implicit induction procedure

  1. Induction, Space and Positive Ethics : Induction, Space, Ethics

    OpenAIRE

    Kirsh, Marvin

    2008-01-01

    4 pages, 0 figures, 1 reference; International audience; One may purport that ones' awareness of space for scientific purposes comes about from a potential awareness of its' absence that is derived from times when ones attention is not focused on it. Yet simply one might extract the notion that space and entailed properties of it are elemental —i.e. conceptually non reducible and that from which all emanates. The words non-ethical induction, entailing the existence of ethical induction, if co...

  2. Flexible heating head for induction heating

    Science.gov (United States)

    Fox, Robert L. (Inventor); Johnson, Samuel D. (Inventor); Coultrip, Robert H. (Inventor); Phillips, W. Morris (Inventor)

    1993-01-01

    An induction heating head includes a length of wire having first and second opposite ends and being wound in a flat spiral shape to form an induction coil, a capacitor connected to the first and second ends of the wire, the induction coil and capacitor defining a tank circuit, and a flexible, elastomeric body molded to encase the induction coil. When a susceptor is placed in juxtaposition to the body, and the tank circuit is powered, the susceptor is inductively heated.

  3. Cyclic and Inductive Calculi are equivalent

    CERN Document Server

    Voicu, Razvan

    2011-01-01

    Brotherston and Simpson [citation] have formalized and investigated cyclic reasoning, reaching the important conclusion that it is at least as powerful as inductive reasoning (specifically, they showed that each inductive proof can be translated into a cyclic proof). We add to their investigation by proving the converse of this result, namely that each inductive proof can be translated into an inductive one. This, in effect, establishes the equivalence between first order cyclic and inductive calculi.

  4. Cyclic and Inductive Calculi are equivalent

    OpenAIRE

    Razvan VOICU; Li, Mengran

    2011-01-01

    Brotherston and Simpson [citation] have formalized and investigated cyclic reasoning, reaching the important conclusion that it is at least as powerful as inductive reasoning (specifically, they showed that each inductive proof can be translated into a cyclic proof). We add to their investigation by proving the converse of this result, namely that each inductive proof can be translated into an inductive one. This, in effect, establishes the equivalence between first order cyclic and inductive...

  5. Induction of labour.

    Science.gov (United States)

    Leduc, Dean; Biringer, Anne; Lee, Lily; Dy, Jessica

    2013-09-01

    Objectif : Analyser la littérature la plus récente afin de formuler des recommandations factuelles à l’intention des fournisseurs de soins obstétricaux au sujet du déclenchement du travail. Options : Mise en œuvre d’un déclenchement du travail dans le cadre d’une grossesse. Issues : Chronologie et méthode appropriées pour ce qui est du déclenchement, mode d’accouchement approprié et issues maternelles et périnatales optimales. Résultats : La littérature publiée a été récupérée par l’intermédiaire de recherches menées dans PubMed, CINAHL et The Cochrane Library en 2010, au moyen d’un vocabulaire contrôlé (p. ex. « labour », « induced », « labour induction », « cervical ripening ») et de mots clés (p. ex. « induce », « induction », « augmentation ») appropriés. Les résultats ont été restreints aux analyses systématiques, aux essais comparatifs randomisés / essais cliniques comparatifs et aux études observationnelles. Aucune restriction n’a été appliquée en matière de date ou de langue. Les recherches ont été mises à jour de façon régulière et intégrées à la directive clinique jusqu’à la fin de 2010. La littérature grise (non publiée) a été identifiée par l’intermédiaire de recherches menées dans les sites Web d’organismes s’intéressant à l’évaluation des technologies dans le domaine de la santé et d’organismes connexes, dans des collections de directives cliniques, dans des registres d’essais cliniques et auprès de sociétés de spécialité médicale nationales et internationales. Valeurs : La qualité des résultats est évaluée au moyen des critères décrits dans le rapport du Groupe d’étude canadien sur les soins de santé préventifs (Tableau 1). Validation : Les données, les déclarations sommaires et les recommandations que contient la présente directive clinique ont été vérifiées en les comparant à celles de directives

  6. 38 CFR 21.282 - Effective date of induction into a rehabilitation program; retroactive induction.

    Science.gov (United States)

    2010-07-01

    ... induction into a rehabilitation program; retroactive induction. 21.282 Section 21.282 Pensions, Bonuses, and... Vocational Rehabilitation and Employment Under 38 U.S.C. Chapter 31 Induction into A Rehabilitation Program § 21.282 Effective date of induction into a rehabilitation program; retroactive induction. (a)...

  7. Induction interview form in EDH

    CERN Document Server

    Information technology Department, AIS (Administrative Information Services) Group

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of his taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction1) (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows.Information technology Department, AIS (Administrative Information Services) Group Human Re...

  8. Induction interview form in EDH

    CERN Document Server

    Information technology Department, AIS (Administrative Information Services) Group,

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of him taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows. Information technology Department, AIS (Administrative Information Services) Group Human...

  9. Closed inductively coupled plasma cell

    Science.gov (United States)

    Manning, Thomas J.; Palmer, Byron A.; Hof, Douglas E.

    1990-01-01

    A closed inductively coupled plasma cell generates a relatively high power, low noise plasma for use in spectroscopic studies. A variety of gases can be selected to form the plasma to minimize spectroscopic interference and to provide a electron density and temperature range for the sample to be analyzed. Grounded conductors are placed at the tube ends and axially displaced from the inductive coil, whereby the resulting electromagnetic field acts to elongate the plasma in the tube. Sample materials can be injected in the plasma to be excited for spectroscopy.

  10. A comparison between vital capacity induction and tidal breathing induction techniques for the induction of anesthesia and compound A production

    Institute of Scientific and Technical Information of China (English)

    LIU Shu-jie; LI Yue; SUN Bo; WANG Chang-song; GONG Yu-lei; ZHOU Yan-mei; LI En-you

    2010-01-01

    Background Vital capacity induction and tidal breathing induction are currently administered for inhalation induction of anesthesia with sevoflurane. The aim of this study was to compare them using sevoflurane with respect to induction time,complications of inhalation induction, and compound A production in adult patients.Methods Fifty-one women with American Society of Anesthesiologists physical status Ⅰ-Ⅱ undergoing mammary gland tumorectomy were randomly assigned to receive either vital capacity induction or tidal breathing induction with 8% sevoflurane at 6 L/min followed by laryngeal mask airway insertion. Induction times, complications of inhalation induction,and vital signs were recorded. Inspired concentrations of compound A were assayed and sofnolime temperatures were monitored at one-minute intervals after sevoflurane administration.Results The time to loss of eyelash reflex was significantly shorter with the vital capacity induction technique than with the tidal breathing induction technique ((43.8±13.4) seconds vs. (70.8±16.4) seconds, respectively; P <0.01).Cardiovascular stability was similar in both groups. The incidence of complications was significantly less with the vital capacity induction technique than with the tidal breathing induction technique (7.7% vs. 32%, respectively; P <0.01).However, the mean and maximum concentrations of compound A during induction were significantly higher in the vital capacity group than those in the tidal breathing group (P <0.05); compound A concentration at the beginning of anesthesia maintenance was (40.73±10.83) ppm in the vital capacity group and (29.45±7.51) ppm in tidal breathing group (P=0.019).Conclusion For inhalation induction of anesthesia, the vital capacity induction was faster and produced fewer complications than that for tidal breathing induction, but increased compound A production in the circuit system.

  11. Teaching the Photoelectric Effect Inductively

    Science.gov (United States)

    Sokolowski, Andrzej

    2013-01-01

    Research has shown that students have difficulty understanding the underlying process of the photoelectric effect. Thus, this study sought to utilize an inductively situated lesson for teaching the photoelectric effect, hypothesizing that this type of enquiry would help learners delve deeper into the principles of the phenomenon and provide a…

  12. Experiments with an Induction Cooker

    Science.gov (United States)

    Zilavy, Peter

    2009-01-01

    The induction cooker is a common appliance nowadays. How does it work? Why is it not possible to use aluminium utensils with it? What experiments can be carried out with it (at different levels) and not only in physics lessons? Searching for the answers to these and other questions is the purpose of this article. (Contains 5 figures.)

  13. Direct-reading inductance meter

    Science.gov (United States)

    Kolbly, R. B.

    1977-01-01

    Meter indicates from 30 nH to 3 micro H. Reference inductor of 15 micro H is made by winding 50 turns of Number 26 Formvar wire on Micrometal type 50-2 (or equivalent) core. Circuit eliminates requirement for complex instrument compensation prior to taking coil inductance measurement and thus is as easy to operate as common ohmmeter.

  14. Low-inductance bus lines

    Science.gov (United States)

    Kernick, A.

    1977-01-01

    Laminated bus strips and bifilar litz cable connectors for high-power rectifiers, thrisistors, and transistors provide low inductance and eliminate electromagnetic interference in high-power circuits. These techniques offer significant cost advantages because of ease of assembly and consistent high quality of product. Effectiveness makes general usage in static power conversion likely.

  15. Mathematical Induction: Deductive Logic Perspective

    Science.gov (United States)

    Dogan, Hamide

    2016-01-01

    Many studies mentioned the deductive nature of Mathematical Induction (MI) proofs but almost all fell short in explaining its potential role in the formation of the misconceptions reported in the literature. This paper is the first of its kind looking at the misconceptions from the perspective of the abstract of the deductive logic from one's…

  16. Dirac Induction for loop groups

    NARCIS (Netherlands)

    Posthuma, H.

    2011-01-01

    Using a coset version of the cubic Dirac operators for affine Lie algebras, we give an algebraic construction of the Dirac induction homomorphism for loop group representations. With this, we prove a homogeneous generalization of the Weyl-Kac character formula and show compatibility with Dirac induc

  17. Plasma-heating by induction

    Science.gov (United States)

    Harrington, K.; Thorpe, M. L.

    1969-01-01

    Induction-heated plasma torch operates with an input of 1 Mw of direct current of which 71 percent is transferred to the plasma and the remainder is consumed by electrical losses in the system. Continuous operation of the torch should be possible for as long as 5,000 hours.

  18. Inductive logic on conceptual spaces

    NARCIS (Netherlands)

    Sznajder, Marta

    2017-01-01

    This thesis investigates the question of how conceptual frameworks influence inductive reasoning. A conceptual framework is a collection of concepts used for a particular purpose; we can think of it as a semantic environment in which observations, or evidence, are recorded, and beliefs are formed an

  19. Teaching Inductive Reasoning with Puzzles

    Science.gov (United States)

    Wanko, Jeffrey J.

    2017-01-01

    Working with language-independent logic structures can help students develop both inductive and deductive reasoning skills. The Japanese publisher Nikoli (with resources available both in print and online) produces a treasure trove of language-independent logic puzzles. The Nikoli print resources are mostly in Japanese, creating the extra…

  20. The reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerization of vinyl acetate mediated by xanthate

    Institute of Scientific and Technical Information of China (English)

    Bo Jiang; Qing Hua Zhang; Xiao Li Zhan; Feng Qiu Chen

    2009-01-01

    The reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerization of vinyl acetate (VAt) mediated by methyl (methoxycarbonothioyl) sulfanyl acetate (MMSA) was carried out. The results showed that polymerizations initiated by AIBN and KPS proceeded in a controlled way. The RAFT miniemulsion polymerization of VAc initiated by KPS showed the shorter inhibition period, higher propagation rate coefficient and final conversion than those in experiment initiated by AIBN. When the monomer conversion reached 25%, the polydispersity index (PDI) of polymer became broad, which was related to chain transfer reaction in RAFT miniemulsion of VAc.

  1. Acetate mediates a microbiome-brain-β-cell axis to promote metabolic syndrome

    DEFF Research Database (Denmark)

    Perry, Rachel J; Peng, Liang; Barry, Natasha A

    2016-01-01

    Obesity, insulin resistance and the metabolic syndrome are associated with changes to the gut microbiota; however, the mechanism by which modifications to the gut microbiota might lead to these conditions is unknown. Here we show that increased production of acetate by an altered gut microbiota...... in rodents leads to activation of the parasympathetic nervous system, which, in turn, promotes increased glucose-stimulated insulin secretion, increased ghrelin secretion, hyperphagia, obesity and related sequelae. Together, these findings identify increased acetate production resulting from a nutrient......-gut microbiota interaction and subsequent parasympathetic activation as possible therapeutic targets for obesity....

  2. Programming with Inductive and Co-Inductive Types

    Science.gov (United States)

    1992-01-27

    Lecture Notes in Computer Science 389, eds. D. H. Pitt, D. E. Rydeheard, P. Dybjer, A. M. Pitts, and A. Poign6...University of Edinburgh. 1987. [5] Thierry Coquand and Christine Paulin. Inductively defined types. In COLOG-88, Lecture Notes in Computer Science 417, eds...Computer Science, Lecture Notes in Computer Science 283, eds. D. H. Pitt, A. Poing6, and D. E. Rydeheard, pages 140-157. September 1987. [9] Tatsuya

  3. Induction generator-induction motor wind-powered pumping system

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, M.S.; Lyra, R.O.C.; Silva, S.R. [CPDEE - UFMG, Belo Horizonte (Brazil)

    1997-12-31

    The energy storage matter plays an important role in wind-electric conversion systems for isolated applications. Having that in mind, two different approaches can be basically considered: either the immediate conversion of the generated electric energy, as in a water pumping system or electric energy storage for later use, as in a battery charging system. Due to some features such as no need of an external reactive power source and, sometimes, a gearbox, permanent-magnet synchronous generators have been broadly used in low rated power isolated systems. Despite that, system performance can be affected when the generator is feeding an inductive load (e.g., an induction motor) under variable-speed-variable-frequency operational conditions. Since there is no effective flux control, motor overload may occur at high wind speeds. Thus, good system performance can be obtained through additional control devices which may increase system cost. Although being rugged and cheap, induction machines always work as a reactive power drain; therefore, they demand an external reactive power source. Considering that, reactive static compensators appear as an attractive alternative to the cost x performance problem. In addition to that, different control strategies can be used so that system performance can be improved.

  4. Flux Tracking Control of Induction Motors

    Institute of Scientific and Technical Information of China (English)

    LanLin; XiaowuMu; ChunxiaBu

    2004-01-01

    This paper deals with flux tracking control of induction motors. Firstly,we analyze convergency of non-homogeneous linear time-varying systems and a sufficient condition is given. Finally, the flux regulator of induction motors is discussed.

  5. Inductance Scaling of a Helicoil Using ALEGRA

    Science.gov (United States)

    2013-05-01

    5066 The inductance scaling of several helicoil configurations are investigated using the March 2011 release of the Sandia magnetohydrodynamics (MHD...inductance scaling of several helicoil configurations are investigated using the March 2011 release of the Sandia magnetohydrodynamics (MHD) code

  6. Sequent calculus proof systems for inductive definitions

    OpenAIRE

    Brotherston, James

    2006-01-01

    Inductive definitions are the most natural means by which to represent many families of structures occurring in mathematics and computer science, and their corresponding induction / recursion principles provide the fundamental proof techniques by which to reason about such families. This thesis studies formal proof systems for inductive definitions, as needed, e.g., for inductive proof support in automated theorem proving tools. The systems are formulated as sequent calculi for...

  7. Structured Statistical Models of Inductive Reasoning

    Science.gov (United States)

    Kemp, Charles; Tenenbaum, Joshua B.

    2009-01-01

    Everyday inductive inferences are often guided by rich background knowledge. Formal models of induction should aim to incorporate this knowledge and should explain how different kinds of knowledge lead to the distinctive patterns of reasoning found in different inductive contexts. This article presents a Bayesian framework that attempts to meet…

  8. Online Monitoring of Induction Motors

    Energy Technology Data Exchange (ETDEWEB)

    McJunkin, Timothy R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lybeck, Nancy Jean [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-01-01

    The online monitoring of active components project, under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability Program, researched diagnostic and prognostic models for alternating current induction motors (IM). Idaho National Laboratory (INL) worked with the Electric Power Research Institute (EPRI) to augment and revise the fault signatures previously implemented in the Asset Fault Signature Database of EPRI’s Fleet Wide Prognostic and Health Management (FW PHM) Suite software. Induction Motor diagnostic models were researched using the experimental data collected by Idaho State University. Prognostic models were explored in the set of literature and through a limited experiment with 40HP to seek the Remaining Useful Life Database of the FW PHM Suite.

  9. Teaching the photoelectric effect inductively

    Science.gov (United States)

    Sokolowski, Andrzej

    2013-01-01

    Research has shown that students have difficulty understanding the underlying process of the photoelectric effect. Thus, this study sought to utilize an inductively situated lesson for teaching the photoelectric effect, hypothesizing that this type of enquiry would help learners delve deeper into the principles of the phenomenon and provide a better background for its quantification. The lesson was conducted with a group of fifteen high-school physics students and a computerized simulated experiment was utilized as the medium for instruction. Students’ responses to a qualitative question about the role of a battery in the photoelectric circuit supported the hypothesis that the lesson was a valuable learning experience. This paper presents an outline for the inductively reasoned learning process.

  10. Induction studies with satellite data

    DEFF Research Database (Denmark)

    Olsen, Nils

    1999-01-01

    analysis of the geomagnetic field is performed, and the Q-response, which is the transfer function between the internal (induced) and the external (inducing) expansion coefficients is determined for a specific frequency. In the second approach, known as the geomagnetic depth sounding method, the C....... This paper reviews and discusses the possibilities for induction studies using high-precision magnetic measurements from low-altitude satellites. The different methods and various transfer functions are presented, with special emphasis on the differences in analysing data from ground stations and from...... satellites. The results of several induction studies with scalar satellite data (from the POGO satellites) and with vector data (from the Magsat mission) demonstrate the ability to probe the Earth's conductivity from space. However, compared to the results obtained with ground data the satellite results...

  11. The performance of induction levitators

    Science.gov (United States)

    Eastham, J. F.; Rodger, D.

    1984-09-01

    The present investigation is concerned with the performance of induction levitators, which are employed in vehicles for contactless transport systems, utilizing magnetic levitation (Maglev). A small model (38 cm long) of an induction levitator is shown. The armature consists of a laminated 'u' shaped iron yoke. Around the limbs of the yoke are wound two primary excitation coils carrying single phase 50 Hz current. Eddy currents, induced in the conducting secondary, produce a force of repulsion between secondary and yoke. A lateral stabilizing force can also be obtained. A description is presented of a study of the characteristics of these forces. Attention is given of a finite element model and the application of the Galerkin weighted residual technique, experimental and calculated results, and a design study of two single phase levitators for a 50 tonne Maglev vehicle.

  12. Inductive shearing of drilling pipe

    Energy Technology Data Exchange (ETDEWEB)

    Ludtka, Gerard M.; Wilgen, John; Kisner, Roger; Mcintyre, Timothy

    2016-04-19

    Induction shearing may be used to cut a drillpipe at an undersea well. Electromagnetic rings may be built into a blow-out preventer (BOP) at the seafloor. The electromagnetic rings create a magnetic field through the drillpipe and may transfer sufficient energy to change the state of the metal drillpipe to shear the drillpipe. After shearing the drillpipe, the drillpipe may be sealed to prevent further leakage of well contents.

  13. Induction and Mutually Obstructing Equilibria

    OpenAIRE

    Hahn, Dorothea; Liu, Mario

    2004-01-01

    A unified, consistent and simple view of the Faraday law of induction is presented, which consists of two points: discriminating the lab- from the rest-frame electric field and understanding it is the impossibility for both fields to vanish simultaneously, which generates and maintains the circular current. A number of illustrative examples are considered, including a mechano-electric pendulum to exhibit periodic and reversible conversion between electrical and mechanical energy.

  14. Inductive, Analogical, and Communicative Generalization

    Directory of Open Access Journals (Sweden)

    Adri Smaling

    2003-03-01

    Full Text Available Three forms of inductive generalization - statistical generalization, variation-based generalization and theory-carried generalization - are insufficient concerning case-to-case generalization, which is a form of analogical generalization. The quality of case-to-case generalization needs to be reinforced by setting up explicit analogical argumentation. To evaluate analogical argumentation six criteria are discussed. Good analogical reasoning is an indispensable support to forms of communicative generalization - receptive and responsive (participative generalization — as well as exemplary generalization.

  15. Inductive shearing of drilling pipe

    Science.gov (United States)

    Ludtka, Gerard M.; Wilgen, John; Kisner, Roger; Mcintyre, Timothy

    2016-04-19

    Induction shearing may be used to cut a drillpipe at an undersea well. Electromagnetic rings may be built into a blow-out preventer (BOP) at the seafloor. The electromagnetic rings create a magnetic field through the drillpipe and may transfer sufficient energy to change the state of the metal drillpipe to shear the drillpipe. After shearing the drillpipe, the drillpipe may be sealed to prevent further leakage of well contents.

  16. The law of electromagnetic induction

    Directory of Open Access Journals (Sweden)

    V.J. Kutkovetskyy

    2014-09-01

    Full Text Available Mathematical models of the electromagnetic induction law which do not take into account Faraday’s restrictions are not in full accordance with the physical phenomenon and so they are not laws. Their incomplete correspondence with real devices results in such "paradoxes" as unlimited magnetic field of unipolar generators, infinite sizes of inductors for DC and AC machines modeled, and so on.

  17. First-Year Undergraduate Induction: Who Attends and How Important Is Induction for First Year Attainment?

    Science.gov (United States)

    Murtagh, S.; Ridley, A.; Frings, D.; Kerr-Pertic, S.

    2017-01-01

    The first year of study in higher education is a time of major transition for students. While the importance of induction has been widely demonstrated, there is evidence to suggest that not all students benefit equally from participation in induction. This study examined attendance rates at induction, the relationship between induction attendance…

  18. Inductance of rf-wave-heated plasmas.

    Science.gov (United States)

    Farshi, E; Todo, Y

    2003-03-14

    The inductance of rf-wave-heated plasmas is derived. This inductance represents the inductance of fast electrons located in a plateau during their acceleration due to electric field or deceleration due to collisions and electric field. This inductance has been calculated for small electric fields from the two-dimensional Fokker-Planck equation as the flux crossing the surface of critical energy mv(2)(ph)/2 in the velocity space. The new expression may be important for radio-frequency current drive ramp-up, current drive efficiency, current profile control, and so on in tokamaks. This inductance may be incorporated into transport codes that study plasma heating by rf waves.

  19. PERMANENT-MAGNET INDUCTION GENERATORS: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    K. S. S. RAMAKRISHNAN

    2011-06-01

    Full Text Available The advantage of using a permanent-magnet induction generator (PMIG instead of a conventional induction generator is its ability to suppress inrush current during system linking when synchronous input is performed. Induction machines excited with permanent-magnet (PM are called permanent-magnet induction generators. This paper presents an exhaustive survey of the literature discussing the classification of permanent-magnet machines, process of permanent-magnet excitation and voltage build-up, modelling, steady-state and performance analysis of the permanent-magnet induction generators.

  20. Modelling Of Chlorine Inductive Discharges

    Science.gov (United States)

    Chabert P.; Despiau-Pujo, E.

    2010-07-01

    III-V compounds such as GaAs, InP or GaN-based materials are increasingly important for their use in optoelectronic applications, especially in the telecommunications and light detection industries. Photonic devices including lasers, photodetectors or LEDs, require reliable etching processes characterized by high etch rate, profile control and low damage. Although many problems remain to be understood, inductively coupled discharges seem to be promising to etch such materials, using Cl2/Ar, Cl2/N2 and Cl2/H2 gas chemistries. Inductively coupled plasma (ICP) sources meet most of the requirements for efficient plasma processing such as high etch rates, high ion densities and low controllable ion energies. However, the presence of a negative ion population in the plasma alters the positive ion flux, reduces the electron density, changes the electron temperature, modifies the spatial structure of the discharge and can cause unstable operation. Several experimental studies and numerical simulation results have been published on inductively coupled Cl2/Ar plasmas but relatively few systematic comparisons of model predictions and experimental data have been reported in given reactor geometries under a wide range of op- erating conditions. Validation of numerical predictions is essential for chemically complex plasma processing and there is a need to benchmark the models with as many measurements as possible. In this paper, comparisons of 2D fluid simulations with experimental measurements of Ar/Cl2 plasmas in a low pressure ICP reactor are reported (Corr et al. 2008). The electron density, negative ion fraction and Cl atom density are investigated for various conditions of Ar/Cl2 ratio, gas pressure and applied RF power in H mode. Simulations show that the wall recombination coefficient of Cl atom (?) is a key parameter of the model and that neutral densities are very sensitive to its variations. The best agreement between model and experiment is obtained for ? = 0

  1. An induction linac developed for FEL application

    Science.gov (United States)

    de Mascureau, J.; Anthouard, Ph.; Bardy, J.; Eyharts, Ph.; Eyl, P.; Launspach, J.; Thevenot, M.; Villate, D.

    1992-07-01

    An induction linac is being studied and built at CESTA for FEL application. At first we studied the induction technology and namely the high-voltage (HV) generators and the induction cells. A HV generator designed to feed the cells with calibrated pulses (150 kV, 50 ns, δV/V magnetic switches. This generator is planned for kHz repetition-rate operation. A prototype induction cell has also been built and tested with a cable generator. An electron injector (1.5 MeV, 1.5kA) has been designed and is now under test: it uses ten induction cells and a thermionic dispenser cathode. Numerical codes have been developed and simulations have been compared with experimental results for HV generators, induction cells, and the injector. An induction accelerating module has been studied and we plan to have the accelerator working at 3 MeV in 1992.

  2. Lessons for Inductive Germline Determination

    Science.gov (United States)

    Seervai, Riyad N.H.; Wessel, Gary M.

    2015-01-01

    SUMMARY Formation of the germline in an embryo marks a fresh round of reproductive potential, yet the developmental stage and location within the embryo where the primordial germ cells (PGCs) form differs wildly among species. In most animals, the germline is formed either by an inherited mechanism, in which maternal provisions within the oocyte drive localized germ-cell fate once acquired in the embryo, or an inductive mechanism that involves signaling between cells that directs germ-cell fate. The inherited mechanism has been widely studied in model organisms such as Drosophila melanogaster, Caenorhabditis elegans, Xenopus laevis, and Danio rerio. Given the rapid generation time and the effective adaptation for laboratory research of these organisms, it is not coincidental that research on these organisms has led the field in elucidating mechanisms for germline specification. The inductive mechanism, however, is less well understood and is studied primarily in the mouse (Mus musculus). In this review, we compare and contrast these two fundamental mechanisms for germline determination, beginning with the key molecular determinants that play a role in the formation of germ cells across all animal taxa. We next explore the current understanding of the inductive mechanism of germ-cell determination in mice, and evaluate the hypotheses for selective pressures on these contrasting mechanisms. We then discuss the hypothesis that the transition between these determination mechanisms, which has happened many times in phylogeny, is more of a continuum than a binary change. Finally, we propose an analogy between germline determination and sex determination in vertebrates—two of the milestones of reproduction and development—in which animals use contrasting strategies to activate similar pathways. PMID:23450642

  3. Lessons for inductive germline determination.

    Science.gov (United States)

    Seervai, Riyad N H; Wessel, Gary M

    2013-08-01

    Formation of the germline in an embryo marks a fresh round of reproductive potential, yet the developmental stage and location within the embryo where the primordial germ cells (PGCs) form differs wildly among species. In most animals, the germline is formed either by an inherited mechanism, in which maternal provisions within the oocyte drive localized germ-cell fate once acquired in the embryo, or an inductive mechanism that involves signaling between cells that directs germ-cell fate. The inherited mechanism has been widely studied in model organisms such as Drosophila melanogaster, Caenorhabditis elegans, Xenopus laevis, and Danio rerio. Given the rapid generation time and the effective adaptation for laboratory research of these organisms, it is not coincidental that research on these organisms has led the field in elucidating mechanisms for germline specification. The inductive mechanism, however, is less well understood and is studied primarily in the mouse (Mus musculus). In this review, we compare and contrast these two fundamental mechanisms for germline determination, beginning with the key molecular determinants that play a role in the formation of germ cells across all animal taxa. We next explore the current understanding of the inductive mechanism of germ-cell determination in mice, and evaluate the hypotheses for selective pressures on these contrasting mechanisms. We then discuss the hypothesis that the transition between these determination mechanisms, which has happened many times in phylogeny, is more of a continuum than a binary change. Finally, we propose an analogy between germline determination and sex determination in vertebrates-two of the milestones of reproduction and development-in which animals use contrasting strategies to activate similar pathways.

  4. Elementary induction on abstract structures

    CERN Document Server

    Moschovakis, Yiannis N

    2008-01-01

    Hailed by the Bulletin of the American Mathematical Society as ""easy to use and a pleasure to read,"" this research monograph is recommended for students and professionals interested in model theory and definability theory. The sole prerequisite is a familiarity with the basics of logic, model theory, and set theory.The author, Professor of Mathematics at UCLA and Emeritus Professor of Mathematics,University of Athens, Greece, begins with a focus on the theory of inductive and hyperelementary sets. Subsequent chapters advance to acceptable structures and countable acceptable structures, concl

  5. Mathematical model of induction heating

    Science.gov (United States)

    Rak, Josef

    2017-07-01

    One of mathematical models of induction heating can be described by a parabolic differential equation with the specific Joule looses in the body. Advantage of this method is that the detailed knowledge of the 3D-magnetic field is not necessary and move of the body or the inductor can be easily implemented. The specific Joule looses can computed by solving the Fredholm integral equation of the second kind for the eddy current of density by the Nyström method with the singularity subtraction.

  6. Induction brazing of complex joints

    DEFF Research Database (Denmark)

    Henningsen, Poul; Zhang, Wenqi; Bay, Niels

    2003-01-01

    , or if the hottest area is located outside the joint interface, a number of defects may appear: the braze metal may flow away from the joint, the flux may burn off, poor binding of the braze metal may appear or the braze metal may be overheated. Joint geometry as well as electro-magnetic properties of the work piece......Induction brazing is a fast and appropriate method for industrial joining of complex geometries and metal combinations. In all types of brazing processes it is important to heat the joint interface of the two materials to the same, high temperature. If one of the specimens is warmer than the other...

  7. Induction brazing of complex joints

    DEFF Research Database (Denmark)

    Henningsen, Poul; Zhang, Wenqi; Bay, Niels

    2003-01-01

    Induction brazing is a fast and appropriate method for industrial joining of complex geometries and metal combinations. In all types of brazing processes it is important to heat the joint interface of the two materials to the same, high temperature. If one of the specimens is warmer than the other......, or if the hottest area is located outside the joint interface, a number of defects may appear: the braze metal may flow away from the joint, the flux may burn off, poor binding of the braze metal may appear or the braze metal may be overheated. Joint geometry as well as electro-magnetic properties of the work piece...

  8. Lipase Induction in Mucor hiemalis

    OpenAIRE

    Akhtar, M. Waheed; Mirza, A. Q.; Chughtai, M. I. D.

    1980-01-01

    The influence on lipase induction in Mucor hiemalis of different types of triglycerides containing mainly oleic acid (olive oil), erucic acid (mustard oil), or saturated fatty acids of 8 to 16 carbons (coconut oil) was studied. The fungus was grown in shake flasks in a fermentation medium containing peptone, minerals, and glucose or one of the oils as the carbon source. Maximum lipase was produced when the initial pH of the fermentation medium was kept at 4.0. Addition of Ca2+ to the medium d...

  9. Supersonic induction plasma jet modeling

    Energy Technology Data Exchange (ETDEWEB)

    Selezneva, S.E. E-mail: svetlana2@hermes.usherbS_Selezneva2@hermes.usherb; Boulos, M.I

    2001-06-01

    Numerical simulations have been applied to study the argon plasma flow downstream of the induction plasma torch. It is shown that by means of the convergent-divergent nozzle adjustment and chamber pressure reduction, a supersonic plasma jet can be obtained. We investigate the supersonic and a more traditional subsonic plasma jets impinging onto a normal substrate. Comparing to the subsonic jet, the supersonic one is narrower and much faster. Near-substrate velocity and temperature boundary layers are thinner, so the heat flux near the stagnation point is higher in the supersonic jet. The supersonic plasma jet is characterized by the electron overpopulation and the domination of the recombination over the dissociation, resulting into the heating of the electron gas. Because of these processes, the supersonic induction plasma permits to separate spatially different functions (dissociation and ionization, transport and deposition) and to optimize each of them. The considered configuration can be advantageous in some industrial applications, such as plasma-assisted chemical vapor deposition of diamond and polymer-like films and in plasma spraying of nanoscaled powders.

  10. Inductive reasoning in Alzheimer's disease.

    Science.gov (United States)

    Smith, E E; Rhee, J; Dennis, K; Grossman, M

    2001-12-01

    We evaluated knowledge of basic level and superordinate semantic relations and the role of cognitive resources during inductive reasoning in probable Alzheimer's disease (AD). Nineteen mildly demented AD patients and 17 healthy control subjects judged the truthfulness of arguments with a premise and a conclusion that contain familiar concepts coupled with "blank" predicates, such as "Spiders contain phosphatidylcholine; therefore all insects contain phosphatidylcholine." Like healthy control subjects, AD patients were relatively insensitive to the typicality of the premise category when judging the strength of arguments with a conclusion containing a basic-level concept, but were relatively sensitive to typicality during judgments of arguments containing a superordinate in the conclusion. Moreover, AD patients resembled control subjects in judging arguments with an immediate superordinate in the conclusion compared to arguments with a distant superordinate. AD patients differed from control subjects because they could not take advantage of two premises in an argument containing basic-level concepts. We conclude that semantic knowledge is sufficiently preserved in AD to support inductive reasoning, but that limited cognitive resources may interfere with AD patients' ability to consider the entire spectrum of information available during semantic challenges.

  11. Monitoring transients in low inductance circuits

    Science.gov (United States)

    Guilford, R.P.; Rosborough, J.R.

    1985-10-21

    The instant invention relates to methods of and apparatus for monitoring transients in low inductance circuits and to a probe utilized to practice said method and apparatus. More particularly, the instant invention relates to methods of and apparatus for monitoring low inductance circuits, wherein the low inductance circuits include a pair of flat cable transmission lines. The instant invention is further directed to a probe for use in monitoring pairs of flat cable transmission lines.

  12. The Automation Of Proof By Mathematical Induction

    OpenAIRE

    Bundy, Alan

    1999-01-01

    This paper is a chapter of the Handbook of Automated Reasoning edited by Voronkov and Robinson. It describes techniques for automated reasoning in theories containing rules of mathematical induction. Firstly, inductive reasoning is defined and its importance fore reasoning about any form of repitition is stressed. Then the special search problems that arise in inductive theories are explained followed by descriptions of the heuristic methods that have been devised to solve these problems. ...

  13. Productive Use of Failure in Inductive Proof

    OpenAIRE

    Ireland, A.; Bundy, Alan

    1996-01-01

    Proof by mathematical induction gives rise to various kinds of eureka steps, e.g., missing lemmata and generalization. Most inductive theorem provers rely upon user intervention in supplying the required eureka steps. In contrast, we present a novel theorem-proving architecture for supporting the automatic discovery of eureka steps. We build upon rippling, a search control heuristic designed for inductive reasoning. We show how the failure if rippling can be used in bridging gaps in the searc...

  14. Prostaglandin E, pessaries for induction of labour.

    Science.gov (United States)

    Pearce, J M; Shepherd, J H; Sims, C D

    1979-03-17

    Vaginal pessaries containing 3 mg of prostaglandin E2 were used to induce labour in 200 patients with variable induction features. Prostaglandin-induced labour was augmented where necessary by synthetic oxytocin. There was on failed induction. Only 23% of patients with favourable induction features and 53% of patients with unfavourable features needed oxytocin. There were no adverse fetal or maternal effects. The prostaglandin E2 pessary was as effective in inducing labour as 350 microgram extra-amniotic prostaglandin E2 in tylose in a comparable group of 200 patients in which there were 4 failed inductions.

  15. Inductive voltage divider modeling in Matlab

    Science.gov (United States)

    Andreev, S. A.; Kim, V. L.

    2017-01-01

    Inductive voltage dividers have the most appropriate metrological characteristics on alternative current and are widely used for converting physical signals. The model of a double-decade inductive voltage divider was designed with the help of Matlab/Simulink. The first decade is an inductive voltage divider with balanced winding, the second decade is a single-stage inductive voltage divider. In the paper, a new transfer function algorithm was given. The study shows errors and differences that appeared between the third degree reduced model and a twenty degree unreduced model. The obtained results of amplitude error differ no more than by 7 % between the reduced and unreduced model.

  16. Experimental demonstration of the induction synchrotron.

    Science.gov (United States)

    Takayama, Ken; Arakida, Yoshio; Dixit, Tanuja; Iwashita, Taiki; Kono, Tadaaki; Nakamura, Eiji; Otsuka, Kazunori; Shimosaki, Yoshito; Torikai, Kota; Wake, Masayoshi

    2007-02-01

    We report an experimental demonstration of the induction synchrotron, the concept of which has been proposed as a future accelerator for the second generation of neutrino factory or hadron collider. The induction synchrotron supports a superbunch and a superbunch permits more charge to be accelerated while observing the constraints of the transverse space-charge limit. By using a newly developed induction acceleration system instead of radio-wave acceleration devices, a single proton bunch injected from the 500 MeV booster ring and captured by the barrier bucket created by the induction step voltages was accelerated to 6 GeV in the KEK proton synchrotron.

  17. Teaching Mathematical Induction: An Alternative Approach.

    Science.gov (United States)

    Allen, Lucas G.

    2001-01-01

    Describes experience using a new approach to teaching induction that was developed by the Mathematical Methods in High School Project. The basic idea behind the new approach is to use induction to prove that two formulas, one in recursive form and the other in a closed or explicit form, will always agree for whole numbers. (KHR)

  18. Eisenstein integrals and induction of relations

    NARCIS (Netherlands)

    Ban, E.P. van den

    2004-01-01

    A survey of joint work with Henrik Schlichtkrull on the induction of certain relations among (partial) Eisenstein integrals for the minimal principal series of a reductive symmetric space is given. The application of this principle of induction to the proof of the Fourier inversion formula in [11] a

  19. Induction methods used in low temperature physics

    NARCIS (Netherlands)

    van de Klundert, L.J.M.; de Rooij, C.; Caspari, M.; van der Marel, L.C.

    1975-01-01

    A study has been made of induction bridges used in low temperature physics. In Part 1 the design of a mutual inductance bridge of the Hartshorn type is discussed. This design is based on a critical analysis of impurity effects of the different parts of the Hartshorn bridge. With this equipment

  20. A Philosophical Treatise of Universal Induction

    Directory of Open Access Journals (Sweden)

    Samuel Rathmanner

    2011-06-01

    Full Text Available Understanding inductive reasoning is a problem that has engaged mankind for thousands of years. This problem is relevant to a wide range of fields and is integral to the philosophy of science. It has been tackled by many great minds ranging from philosophers to scientists to mathematicians, and more recently computer scientists. In this article we argue the case for Solomonoff Induction, a formal inductive framework which combines algorithmic information theory with the Bayesian framework. Although it achieves excellent theoretical results and is based on solid philosophical foundations, the requisite technical knowledge necessary for understanding this framework has caused it to remain largely unknown and unappreciated in the wider scientific community. The main contribution of this article is to convey Solomonoff induction and its related concepts in a generally accessible form with the aim of bridging this current technical gap. In the process we examine the major historical contributions that have led to the formulation of Solomonoff Induction as well as criticisms of Solomonoff and induction in general. In particular we examine how Solomonoff induction addresses many issues that have plagued other inductive systems, such as the black ravens paradox and the confirmation problem, and compare this approach with other recent approaches.

  1. A Framework of Mathematics Inductive Reasoning

    Science.gov (United States)

    Christou, Constantinos; Papageorgiou, Eleni

    2007-01-01

    Based on a synthesis of the literature in inductive reasoning, a framework for prescribing and assessing mathematics inductive reasoning of primary school students was formulated and validated. The major constructs incorporated in this framework were students' cognitive abilities of finding similarities and/or dissimilarities among attributes and…

  2. Turning Norton's Dome Against Material Induction

    Science.gov (United States)

    Dawid, Richard

    2015-09-01

    John Norton has proposed a position of "material induction" that denies the existence of a universal inductive inference schema behind scientific reasoning. In this vein, Norton has recently presented a "dome scenario" based on Newtonian physics that, in his understanding, is at variance with Bayesianism. The present note points out that a closer analysis of the dome scenario reveals incompatibilities with material inductivism itself.

  3. Math Activities that Encourage Inductive Thinking

    Science.gov (United States)

    Freeman, Christopher

    2005-01-01

    There are two kinds of logical reasoning: "inductive" and "deductive". Inductive reasoning proceeds from effect back to cause, from special case to general principle. Detectives use it, examining the clues and conjecturing the actions that caused them. On the other hand, deductive reasoning proceeds from cause to effect, from principle to…

  4. The Tower of Hanoi and Inductive Logic

    Science.gov (United States)

    Merrotsy, Peter

    2015-01-01

    In the "Australian Curriculum," the concept of mathematical induction is first met in the senior secondary subject Specialist Mathematics. This article details an example, the Tower of Hanoi problem, which provides an enactive introduction to the inductive process before moving to more abstract and cognitively demanding representations.…

  5. Arsenic Induction of Metallothionein and Metallothionein Induction Against Arsenic Cytotoxicity.

    Science.gov (United States)

    Rahman, Mohammad Tariqur; De Ley, Marc

    Human exposure to arsenic (As) can lead to oxidative stress that can become evident in organs such as the skin, liver, kidneys and lungs. Several intracellular antioxidant defense mechanisms including glutathione (GSH) and metallothionein (MT) have been shown to minimize As cytotoxicity. The current review summarizes the involvement of MT as an intracellular defense mechanism against As cytotoxicity, mostly in blood. Zinc (Zn) and selenium (Se) supplements are also proposed as a possible remediation of As cytotoxicity. In vivo and in vitro studies on As toxicity were reviewed to summarize cytotoxic mechanisms of As. Intracellular antioxidant defense mechanisms of MT are linked in relation to As cytotoxicity. Arsenic uses a different route, compared to major metal MT inducers such as Zn, to enter/exit blood cells. A number of in vivo and in vitro studies showed that upregulated MT biosynthesis in blood components are related to toxic levels of As. Despite the cysteine residues in MT that aid to bind As, MT is not the preferred binding protein for As. Nonetheless, intracellular oxidative stress due to As toxicity can be minimized, if not eliminated, by MT. Thus MT induction by essential metals such as Zn and Se supplementation could be beneficial to fight against As toxicity.

  6. Reasoning about modular datatypes with Mendler induction

    Directory of Open Access Journals (Sweden)

    Paolo Torrini

    2015-09-01

    Full Text Available In functional programming, datatypes a la carte provide a convenient modular representation of recursive datatypes, based on their initial algebra semantics. Unfortunately it is highly challenging to implement this technique in proof assistants that are based on type theory, like Coq. The reason is that it involves type definitions, such as those of type-level fixpoint operators, that are not strictly positive. The known work-around of impredicative encodings is problematic, insofar as it impedes conventional inductive reasoning. Weak induction principles can be used instead, but they considerably complicate proofs. This paper proposes a novel and simpler technique to reason inductively about impredicative encodings, based on Mendler-style induction. This technique involves dispensing with dependent induction, ensuring that datatypes can be lifted to predicates and relying on relational formulations. A case study on proving subject reduction for structural operational semantics illustrates that the approach enables modular proofs, and that these proofs are essentially similar to conventional ones.

  7. Inductive cooling in quantum magnetomechanics

    Science.gov (United States)

    Romero-Sanchez, Erick; Twamley, Jason; Bowen, Warwick P.; Vanner, Michael R.

    Coupling to light or microwave fields allows quantum control of the motion of a mechanical oscillator, and offers prospects for precision sensing, quantum information systems, and tests of fundamental physics. In cavity electromechanics ground state cooling has been achieved using resolved sideband cooling. Here we present an alternative approach based on a magnetomechanical system that inductively couples an LC resonator to a mechanical oscillator. The experimental setup consists of a micro cantilever with a pyramidal magnetic tip attached at the end of the beam. The sharp end of the magnetic tip is positioned close to the planar microfabricated inductor of the LC resonator. The displacement in the position of the end of the cantilever generates a change in flux through the coil inducing an electromotive force in the circuit. The current in the LC resonator generates a magnetic field, and then a force between the tip and the coil. When they are strongly coupled and the mechanical resonance frequency ωm exceeds the electrical decay rate of the resonator γe, resolved sideband cooling can be used to cool the mechanics. We present estimations for the coupling rates and the experimental parameters required for these experiments. E. Romero acknowledges to CONACyT.

  8. Graph-based inductive reasoning.

    Science.gov (United States)

    Boumans, Marcel

    2016-10-01

    This article discusses methods of inductive inferences that are methods of visualizations designed in such a way that the "eye" can be employed as a reliable tool for judgment. The term "eye" is used as a stand-in for visual cognition and perceptual processing. In this paper "meaningfulness" has a particular meaning, namely accuracy, which is closeness to truth. Accuracy consists of precision and unbiasedness. Precision is dealt with by statistical methods, but for unbiasedness one needs expert judgment. The common view at the beginning of the twentieth century was to make the most efficient use of this kind of judgment by representing the data in shapes and forms in such a way that the "eye" can function as a reliable judge to reduce bias. The need for judgment of the "eye" is even more necessary when the background conditions of the observations are heterogeneous. Statistical procedures require a certain minimal level of homogeneity, but the "eye" does not. The "eye" is an adequate tool for assessing topological similarities when, due to heterogeneity of the data, metric assessment is not possible. In fact, graphical assessments precedes measurement, or to put it more forcefully, the graphic method is a necessary prerequisite for measurement.

  9. Induction technique in manufacturing preforms

    Science.gov (United States)

    Frauenhofer, M.; Ströhlein, T.; Fabig, S.; Böhm, S.; Herbeck, L.; Dilger, K.

    2008-09-01

    The prepreg technology is a state-of-the-art method to produce high-performance CFRP parts. Due to the high material prices, the restricted process rate, and limitations to the component complexity, in future, more and more parts will be assembled by using liquid composite moulding. Especially in the case of series larger than 100 parts per year, the LCM technology offers the best cost-effectiveness. This technology is based on resin injection into dry multilayer fibre textiles (preforms). The Institute of Joining and Welding (TU, Braunschweig), together with the Institute of Composite Structures and Adaptive Systems (DLR), has elaborated a new technology to speed up the preform process, which is the most labour-intensive step within the LCM process chain. A novel concept to consolidate binder-coated fabrics is under development. By applying the high energy transfer rate of induction technology, it is possible to heat up a preform with rates up to 50 K/s to melt the binder and consolidate the preform.

  10. Improvement of polyploidy induction in Eriocheir sinensis

    Institute of Scientific and Technical Information of China (English)

    CUI Zhaoxia; XIANG Jianhai; ZHOU Linghua; CAI Naner; SONG Linsheng

    2004-01-01

    An incubating temperature of 15 ℃ is used to induce triploidy in Eriocheir sinensis through inhibition of the release of polar body Ⅱ, and that of 18 ℃ to induce tetraploidy through inhibition of the first cleavage. Flow cytometry is used to identify the ploidy in different developmental stages. For induction of triploidy in fertilized eggs in vitro, the highest induction rate observed in blastula by cytochalasin B, 6-DMAP and KC1 is 49.1%, 51.7% and 77.5%,respectively. In the KCl treatment of pregnant crabs with the fertilized eggs, the highest triploid induction rate observed in the zoea is 85.3%. For induction of tetraploidy, the highest induction rate observed in the blastula by cytochaslasin B, 6-DMAP and KCl is 50.3%, 54.9% and 79.8% respectively. In the KC1 treatment of pregnant crabs with the fertilized eggs, the highest induction rate in zoea is 27.3%. Through this study such difficulty as in vitro culture is overcome. Triploid zoea Eriocheir sinensis has been developed for the first time. The induction rate of tetraploid zoea has also been greatly improved.

  11. Two frameworks for integrating knowledge in induction

    Science.gov (United States)

    Rosenbloom, Paul S.; Hirsh, Haym; Cohen, William W.; Smith, Benjamin D.

    1994-01-01

    The use of knowledge in inductive learning is critical for improving the quality of the concept definitions generated, reducing the number of examples required in order to learn effective concept definitions, and reducing the computation needed to find good concept definitions. Relevant knowledge may come in many forms (such as examples, descriptions, advice, and constraints) and from many sources (such as books, teachers, databases, and scientific instruments). How to extract the relevant knowledge from this plethora of possibilities, and then to integrate it together so as to appropriately affect the induction process is perhaps the key issue at this point in inductive learning. Here the focus is on the integration part of this problem; that is, how induction algorithms can, and do, utilize a range of extracted knowledge. Preliminary work on a transformational framework for defining knowledge-intensive inductive algorithms out of relatively knowledge-free algorithms is described, as is a more tentative problems-space framework that attempts to cover all induction algorithms within a single general approach. These frameworks help to organize what is known about current knowledge-intensive induction algorithms, and to point towards new algorithms.

  12. Instabilities in inductive discharges in reactive gases

    Science.gov (United States)

    Chabert, Pascal

    2002-10-01

    High-density inductively coupled plasmas (ICP) are routinely used for etching in the microelectronics industry. Since there is a substantial voltage across the non-resonant inductive coil, a fraction of the discharge power is deposited capacitively. The real inductive discharge can therefore exist in two different modes: the capacitive mode (E mode), for low power, and the inductive mode (H mode), for high power. As the power is increased, transitions from capacitive to inductive modes (E-H transitions) are observed. Tuszewski (Journal of Applied Physics, 1996) found that when operating with reactive gases containing negative ions the transition can be unstable, and a wide range of powers exist where the discharge oscillates between higher and lower electron density states. Later, Lieberman and co-workers (Lieberman et al., Applied Physics Letters 1999, and Chabert et al. Plasma Sources Sci. and Technol. 2001) proposed a model of this instability, based on particle and energy balance, showing the crucial role of negative ions in the instability process. This paper will present recent experimental and theoretical work in this area. Oscillations in the unsaturated radical (CF and CF2 in a CF4 inductive discharge) concentrations were measured during the instability by time-resolved laser induced fluorescence, showing that neutral species dynamics can be significant. On the theoretical side, conditions for the stability of inductive discharges with electronegative gases were derived from the model.

  13. Calculation of Leakage Inductance for High Frequency Transformers

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Jun, Zhang; Hurley, William Gerard

    2015-01-01

    Frequency dependent leakage inductance is often observed. High frequency eddy current effects cause a reduction in leakage inductance. The proximity effect between adjacent layers is responsible for the reduction of leakage inductance. This paper gives a detailed analysis of high frequency leakage...... inductance and proposes an accurate prediction methodology. High frequency leakage inductances in several interleaved winding configurations are also discussed. Interleaved winding configurations actually give a smaller degree of reduction of leakage induction at high frequency. Finite Element Analysis (FEA...

  14. Applied intelligent control of induction motor drives

    CERN Document Server

    Chan, Tze Fun

    2011-01-01

    Induction motors are the most important workhorses in industry. They are mostly used as constant-speed drives when fed from a voltage source of fixed frequency. Advent of advanced power electronic converters and powerful digital signal processors, however, has made possible the development of high performance, adjustable speed AC motor drives.This book aims to explore new areas of induction motor control based on artificial intelligence (AI) techniques in order to make the controller less sensitive to parameter changes. Selected AI techniques are applied for different induction motor control s.

  15. Generalized Rule Induction Based on Immune Algorithm

    Institute of Scientific and Technical Information of China (English)

    郑建国; 刘芳; 焦李成

    2002-01-01

    A generalized rule induction mechanism, immune algorithm, for knowledge bases is building an inheritance hierarchy of classes based on the content of their knowledge objects. This hierarchy facilitates group-related processing tasks such as answering set queries, discriminating between objects, finding similarities among objects, etc. Building this hierarchy is a difficult task for knowledge engineers. Conceptual induction may be used to automate or assist engineers in the creation of such a classification structure. This paper introduces a new conceptual rule induction method, which addresses the problem of clustering large amounts of structured objects. The conditions under which the method is applicable are discussed.

  16. Ion plating with an induction heating source

    Science.gov (United States)

    Spalvins, T.; Brainard, W. A.

    1976-01-01

    Induction heating is introduced as an evaporation heat source in ion plating. A bare induction coil without shielding can be directly used in the glow discharge region with no arcing. The only requirement is to utilize an rf inductive generator with low operating frequency of 75 kHz. Mechanical simplicity of the ion plating apparatus and ease of operation is a great asset for industrial applications; practically any metal such as nickel, iron, and the high temperature refractories can be evaporated and ion plated.

  17. Scalable conditional induction variables (CIV) analysis

    DEFF Research Database (Denmark)

    Oancea, Cosmin Eugen; Rauchwerger, Lawrence

    2015-01-01

    Subscripts using induction variables that cannot be expressed as a formula in terms of the enclosing-loop indices appear in the low-level implementation of common programming abstractions such as filter, or stack operations and pose significant challenges to automatic parallelization. Because...... the complexity of such induction variables is often due to their conditional evaluation across the iteration space of loops we name them Conditional Induction Variables (CIV). This paper presents a flow-sensitive technique that summarizes both such CIV-based and affine subscripts to program level, using the same...

  18. Lipase Induction in Mucor hiemalis.

    Science.gov (United States)

    Akhtar, M W; Mirza, A Q; Chughtai, M I

    1980-08-01

    The influence on lipase induction in Mucor hiemalis of different types of triglycerides containing mainly oleic acid (olive oil), erucic acid (mustard oil), or saturated fatty acids of 8 to 16 carbons (coconut oil) was studied. The fungus was grown in shake flasks in a fermentation medium containing peptone, minerals, and glucose or one of the oils as the carbon source. Maximum lipase was produced when the initial pH of the fermentation medium was kept at 4.0. Addition of Ca to the medium did not increase lipase production. The optimum pH for activity of both the mycelial and extracellular lipases was found to be 7.0. The fungus produced a significant amount of lipase in the presence of glucose, but the lipase activity increased markedly when olive oil was added to the medium at the beginning of the fermentation. Addition of olive oil at a later stage did not induce as much enzyme. Studies with washed mycelia showed that a greater amount of lipase was released when olive oil was present than when glucose was present. Among the various types of triglycerides used as the carbon source, olive oil was found to be most effective in inducing the lipase. Olive oil and mustard oil fatty acids inhibited the lipase more than those of coconut oil. The lipase induced by a particular type of triglyceride did not seem to be specific for the same triglyceride, nor was it inhibited specifically by it. Irrespective of the triglyceride used in the fermentation medium, the lipase produced was most active against coconut oil triglyceride, and this specificity, as shown by lipase activities in an n-heptane system, was not found to be due to a better emulsification of this oil. The lipase of M. hiemalis can be considered to be both constitutive and inducible.

  19. [Induction of general anesthesia in pediatric patients].

    Science.gov (United States)

    Ota, Chiharu; Taniguchi, Akihiro

    2007-05-01

    The induction of general anesthesia is one of the most stressful procedures during the perioperative period for pediatric patients. Postoperative negative behavioral changes, such as nightmares or separation anxiety are reported in the children undergoing general anesthesia. To avoid these problems, the anesthesiologists have to pay more attention to the psychological needs of young patients as well as the technical aspects. Preoperative interview is important to identify the child who has extreme fear and anxiety. Premedication with sedatives and psychological preparation are effective for the smooth induction. In this article, preparation for the induction and practical skills of the induction in children, newborns, as well as patients with difficult airway and with full stomach are summarized.

  20. Superconducting Resonant Inductive Power Coupling Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed effort will develop a technology to wirelessly and efficiently transfer power over hundreds of meters via resonant inductive coupling. The key...

  1. Titrated Misoprostol Versus Dinoprostone for Labor Induction

    African Journals Online (AJOL)

    Statistical analysis done using Student's t-test for quantitative data and ... Ahmadi Hospital, Kuwait Oil Company, .... Table 1: Demographic data, indication of induction of labor, and initial modified Bishop's score in both studied groups.

  2. Failed labor induction: toward an objective diagnosis.

    LENUS (Irish Health Repository)

    Rouse, Dwight J

    2011-02-01

    To evaluate maternal and perinatal outcomes in women undergoing labor induction with an unfavorable cervix according to duration of oxytocin administration in the latent phase of labor after ruptured membranes.

  3. Computer Assisted Introduction to Mathematical Induction.

    Science.gov (United States)

    Blubaugh, William L.

    1993-01-01

    Describes examples of student-centered activities for exploring mathematical induction using BASIC programs or spreadsheets. Discusses the advantages of using this medium to teach the concept and provides computer programs for the activities. (MDH)

  4. A Philosophical Treatise of Universal Induction

    CERN Document Server

    Rathmanner, Samuel

    2011-01-01

    Understanding inductive reasoning is a problem that has engaged mankind for thousands of years. This problem is relevant to a wide range of fields and is integral to the philosophy of science. It has been tackled by many great minds ranging from philosophers to scientists to mathematicians, and more recently computer scientists. In this article we argue the case for Solomonoff Induction, a formal inductive framework which combines algorithmic information theory with the Bayesian framework. Although it achieves excellent theoretical results and is based on solid philosophical foundations, the requisite technical knowledge necessary for understanding this framework has caused it to remain largely unknown and unappreciated in the wider scientific community. The main contribution of this article is to convey Solomonoff induction and its related concepts in a generally accessible form with the aim of bridging this current technical gap. In the process we examine the major historical contributions that have led to ...

  5. Progress in antenna coupled kinetic inductance detectors

    NARCIS (Netherlands)

    Baryshev, A.; Baselmans, J.J.A.; Freni, A.; Gerini, G.; Hoevers, H.; Iacono, A.; Neto, A.

    2011-01-01

    This paper describes the combined Dutch efforts toward the development of large wideband focal plane array receivers based on kinetic inductance detectors (KIDs). Taking into account strict electromagnetic and detector sensitivity requirements for future ground and space based observatories, this

  6. Parthenogenesis induction by Wolbachia in parasitoids

    Science.gov (United States)

    The maternally inherited intracellular bacterium, Wolbachia pipientis, induces reproductive alterations in host arthropod populations such as male-killing, feminization, parthenogenesis induction (PI, or reproduction without males) and cytoplasmic incompatibility. Here we report that PI in Mexican O...

  7. Cut Elimination for a Logic with Induction and Co-induction

    CERN Document Server

    Tiu, Alwen

    2010-01-01

    Proof search has been used to specify a wide range of computation systems. In order to build a framework for reasoning about such specifications, we make use of a sequent calculus involving induction and co-induction. These proof principles are based on a proof theoretic (rather than set-theoretic) notion of definition. Definitions are akin to logic programs, where the left and right rules for defined atoms allow one to view theories as "closed" or defining fixed points. The use of definitions and free equality makes it possible to reason intentionally about syntax. We add in a consistent way rules for pre and post fixed points, thus allowing the user to reason inductively and co-inductively about properties of computational system making full use of higher-order abstract syntax. Consistency is guaranteed via cut-elimination, where we give the first, to our knowledge, cut-elimination procedure in the presence of general inductive and co-inductive definitions.

  8. Diagnostics of Internal Inductance in HT-7

    Institute of Scientific and Technical Information of China (English)

    曾立; 万宝年; 钱金平; 范恒玉

    2001-01-01

    Two arrays of Mirnov coils and a pair of concentric loops have been installed to superconducting tokamak HT-7. Software compensation and digital Fourier series expansion are the two techniques that have been applied successfully in measuring diamagnetic flux of concentric loops and internal inductance. The internal inductance of plasma li, poloidal beta β-, Grad Shafranov parameter A, plasma minor radius ap and the center of the outermost magnetic flux surface △g are determined.

  9. Chinese traditional medicine for induction of ovulation

    Institute of Scientific and Technical Information of China (English)

    肖碧莲

    2003-01-01

    This is a review paper of some effective recipes of Chinese traditional medicine usedin ovulation induction and treatment of gynecological diseases. Some clinical results bygynecologists using Chinese traditional medicine in combination with western medicineand results from research on traditional medicine with modern technology are presented.A list of frequently used traditional medicine for ovulation induction are selected from the famous Compendium of Materica Medica(本草纲目)by Li Shi-zhen(李时珍).

  10. A Metric Observer for Induction Motors Control

    Directory of Open Access Journals (Sweden)

    Mohamed Benbouzid

    2016-01-01

    Full Text Available This paper deals with metric observer application for induction motors. Firstly, assuming that stator currents and speed are measured, a metric observer is designed to estimate the rotor fluxes. Secondly, assuming that only stator currents are measured, another metric observer is derived to estimate rotor fluxes and speed. The proposed observer validity is checked throughout simulations on a 4 kW induction motor drive.

  11. Inductively-Activated Short-Interval Timer

    Science.gov (United States)

    Wiker, Gordon A.; Wells, George H., Jr.

    1989-01-01

    Timing circuit in pneumatically launched projectile triggers explosive charge in projectile at specified delay after launch. Both power and control signals coupled inductively to timer from stationary launcher circuitry. Eliminates need for direct electrical contacts, which are unreliable and generate sparks that trigger explosive accidentally. Inductive coupling also provides higher reliability in field operation than contacts. Concept useful in such other safety-related applications as remotely or automatically controlling flow of bottled flammable gas.

  12. Inductive Rings and Systems of Diophantine Equations

    Institute of Scientific and Technical Information of China (English)

    Rong Fang BIE; Shi Qiang WANG

    2006-01-01

    In this paper, by using model-theoretic methods, it is shown that some systems of unsolved cubic diophantine equations in number theory can have solutions in certain inductive extension rings of the ring I of rational integers. These inductive rings are not fields, and every element of them is a sum of 4 cubes and a sum of 3 squares. Also some of them satisfy the Goldbach conjecture and some others don't.

  13. Determination of Induction Machine Parameters by Simulation

    OpenAIRE

    Dr. E.A. Anazia; Engr. Samson Ugochukwu; Dr. J. C. Onuegbu; Engr. Onyedikachi S.N

    2016-01-01

    A 38.1 Watt fractional horse power induction laboratory test motor model was created using MotorSolve 5.2; an electrical machine design application. Initial machine parameters such as voltage, speed, and main dimensions were selected and fed into the application and simulations ran. The simulated results were presented and analyzed. Unlike other induction machine parameter identification process, this method is simple, flexible and accurate since it does not involve rigorous mathe...

  14. Inductance Calculations of Variable Pitch Helical Inductors

    Science.gov (United States)

    2015-08-01

    current. Using the classical skin depth definition , we can adjust the effec- tive diameters used to calculate the inductances. The classical skin depth can...are not. The definition of classical skin depth is an approximation that assumes that all the cmrent is flowing evenly within the region encompassed...inductance can be applied to other more complex forms of geometry, including tapered coils, by simply using the more general forms of the self- and

  15. Physic basis of electromagnetic induction low

    Directory of Open Access Journals (Sweden)

    V.J. Kutkovetskyy

    2015-03-01

    Full Text Available The statement on the macro level of EMF dependence on change in magnetic flux in time wrong reflects the physical phenomenon of electromagnetic induction low by Faraday, because EMF can be inducted if the magnetic flux of the circuit does not change. Changing magnetic flux of the circuit when the electromotive force arises is only a result of crossing the magnetic field lines by conductor and is an exception, which applies only to certain classes of electric machines.

  16. [Mood induction procedures: a critical review].

    Science.gov (United States)

    Gilet, A-L

    2008-06-01

    For a long period in the history of psychological research, emotion and cognition have been studied independently, as if one were irrelevant to the other. The renewed interest of researchers for the study of the relations between cognition and emotion has led to the development of a range of laboratory methods for inducing temporary mood states. This paper aims to review the main mood induction procedures allowing the induction of a negative mood as well as a positive mood, developed since the pioneer study of Schachter and Singer [Psychol Rev 69 (1962) 379-399] and to account for the usefulness and problems related to the use of such techniques. The first part of this paper deals with the detailed presentation of some of the most popular mood induction procedures according to their type: simple (use of only one mood induction technique) or combined (association of two or more techniques at once). The earliest of the modern techniques is the Velten Mood Induction Procedure [Behav Res Ther 6 (1968) 473-482], which involves reading aloud sixty self-referent statements progressing from relative neutral mood to negative mood or dysphoria. Some researchers have varied the procedure slightly by changing the number of the statements [Behav Res Ther 21 (1983) 233-239, Br J Clin Psychol 21 (1982) 111-117, J Pers Soc Psychol 35 (1977) 625-636]. Various other mood induction procedures have been developed including music induction [Cogn Emotion 11 (1997) 403-432, Br J Med Psychol 55 (1982) 127-138], film clip induction [J Pers Soc Psychol 20 (1971) 37-43, Cogn Emotion 7 (1993) 171-193, Rottenberg J, Ray RR, Gross JJ. Emotion elicitation using films. In: Coan JA, Allen JJB, editors. The handbook of emotion elicitation and assessment. New York: Oxford University Press, 2007], autobiographical recall [J Clin Psychol 36 (1980) 215-226, Jallais C. Effets des humeurs positives et négatives sur les structures de connaissances de type script. Thèse de doctorat non publi

  17. The Role of Induction Therapy for Esophageal Cancer.

    Science.gov (United States)

    Berry, Mark F

    2016-08-01

    Survival of esophageal cancer generally is poor but has been improving. Induction chemoradiation is recommended before esophagectomy for locally advanced squamous cell carcinoma. Both induction chemotherapy and induction chemoradiation are found to be beneficial for locally advanced adenocarcinoma. Although a clear advantage of either strategy has not yet been demonstrated, consensus-based guidelines recommend induction chemoradiation for locally advanced adenocarcinoma.

  18. Similarity, Induction, Naming, and Categorization (SINC): Generalization or Inductive Reasoning? Reply to Heit and Hayes (2005)

    Science.gov (United States)

    Sloutsky, Vladimir M.; Fisher, Anna V.

    2006-01-01

    This article is a response to E. Heit and B. K. Hayes's comment on the target article "Induction and Categorization in Young Children: A Similarity-Based Model" (V. M. Sloutsky & A. V. Fisher, 2004a). The response discusses points of agreement and disagreement with Heit and Hayes; phenomena predicted by similarity, induction, naming, and…

  19. Magnetic Flux Controllers for Induction Heating Applications

    Institute of Scientific and Technical Information of China (English)

    Valentin Nemkov; Robert Goldstein; Robert Ruffini

    2004-01-01

    Application of magnetic flux controllers/concentrators to induction heating coils can drastically improve the process efficiency and heat pattern control. Presentation includes: benefits provided by flux controllers, materials available for controllers, application techniques, computer assisted design of induction coils with concentrators, examples of applications. Depending on induction system design, magnetic flux controllers can concentrate heating in a specified area,change heat source distribution and shield a particular part zone or external area preventing unintended eddy current heating.Besides of the coil efficiency improvement and optimal power distribution, magnetic flux controllers reduce the coil current demand from a supplying circuitry thus strongly reducing losses in busswork, cables, transformers and inverter components.Improvement that can be achieved due to magnetic flux controllers is case dependable. 2D and 3D computer simulation allows the designer to predict accurately effect of controllers on the coil parameters and temperature distribution and optimize the whole electromagnetic system. Special attention in presentation is paid to new magnetodielectric materials optimized for induction heating conditions. These materials have high magnetic permeability and saturation flux density,excellent machinability, good chemical and temperature resistance. Concentrators from these materials can work in a wide range of frequencies and specific powers. Examples of magnetic flux controller application include surface hardening of shafts and gears, induction surface hardfacing and brazing.

  20. Inductive antenna stent: design, fabrication and characterization

    Science.gov (United States)

    Rashidi Mohammadi, Abdolreza; Ali, Mohamed Sultan Mohamed; Lappin, Derry; Schlosser, Colin; Takahata, Kenichi

    2013-02-01

    This paper describes the design, fabrication, and electromechanical characteristics of inductive stents developed for intelligent stent applications. The stents, fabricated out of 316L stainless-steel tubes using laser machining, are patterned to have zigzag loops without bridge struts, and when expanded, become a helix-like structure. Highly conductive metals such as copper and gold are coated on the stents to improve their inductive/antenna function. The Q-factor of the stent is shown to increase by a factor of 7 at 150 MHz with copper coating. The expansion of the stent from 2 to 4 mm diameter results in a 3.2× increase in the inductance, obtaining ˜1 µH at a similar frequency. The stent passivated by Parylene-C film is used to characterize its resonance in different media including saline. The copper-coated inductive stent exhibits a 2.4× radial stiffness for 1 mm strain as well as a 16× bending compliance compared with a commercial stent, each of which is potentially beneficial in preventing/mitigating stent failures such as recoil as well as enabling easier navigation through intricate blood vessels. The mechanical stiffness may be tailored by adjusting stent-wire thickness while maintaining necessary coating thickness to achieve particular mechanical requirements and high inductive performance simultaneously.

  1. An Algebraic Characterization of Inductive Soundness in Proof by Consistency

    Institute of Scientific and Technical Information of China (English)

    邵志清; 宋国新

    1995-01-01

    Kapur and Musser studied the theoretical basis for proof by consistency and obtained an inductive completeness result:p=q if and only if p=q is true in every inductive model.However,there is a loophole in their proof for the soundness part:p=q implies p=q is true in every inductive model.The aim of this paper is to give a correct characterization of inductive soundness from an algebraic view by introducing strong inductive models.

  2. Pattern formation during C. elegans vulval induction.

    Science.gov (United States)

    Wang, M; Sternberg, P W

    2001-01-01

    Studies of C. elegans vulval development provide insights into the process of pattern formation during animal development. The invariant pattern of vulval precursor cell fates is specified by the integration of at least two signaling systems. Recent findings suggest that multiple, partially redundant mechanisms are involved in patterning the vulval precursor cells. The inductive signal activates the LET-60/RAS signaling pathway and induces the 1 degree fate, whereas the lateral signal mediated by LIN-12/Notch is required for specification of the 2 degrees fate. Several regulatory pathways antagonize the RAS signaling pathway and specify the non-vulval 3 degrees fate in the absence of induction. The temporal and spatial regulation of VPC competence and production of the inductive and the lateral signal are precisely coordinated to ensure the wild-type vulval pattern.

  3. Induction linacs for heavy ion fusion research

    Energy Technology Data Exchange (ETDEWEB)

    Fessenden, T.J.

    1984-05-01

    The new features of employing an induction linac as a driver for inertial fusion involve (1) transport of high-current low-emittance heavy ion beams, (2) multiple independently-focussed beams threading the same accelerator structure, and (3) synthesis of voltage waveforms to accomplish beam current amplification. A research program is underway at LBL to develop accelerators that test all these features with the final goal of producing an ion beam capable of heating matter to approx. 70 eV. This paper presents a discussion of some properties of induction linacs and how they may be used for HIF research. Physics designs of the High Temperature Experiment (HTE) and the Multiple Beam Experiment (MBE) accelerators are presented along with initial concepts of the MBE induction units.

  4. Numerical inductance calculations based on first principles.

    Science.gov (United States)

    Shatz, Lisa F; Christensen, Craig W

    2014-01-01

    A method of calculating inductances based on first principles is presented, which has the advantage over the more popular simulators in that fundamental formulas are explicitly used so that a deeper understanding of the inductance calculation is obtained with no need for explicit discretization of the inductor. It also has the advantage over the traditional method of formulas or table lookups in that it can be used for a wider range of configurations. It relies on the use of fast computers with a sophisticated mathematical computing language such as Mathematica to perform the required integration numerically so that the researcher can focus on the physics of the inductance calculation and not on the numerical integration.

  5. Determination of Coil Inductances Cylindrical Iron Nucleus

    Directory of Open Access Journals (Sweden)

    Azeddine Mazouz

    2014-03-01

    Full Text Available The paper describes the investigation and development of a structure and performance characteristics of a coil iron nucleus cylindrical (C.I.N.C. The coil iron nucleus cylindrical is a nonlinear electro radio in which the moving of the nucleus in a sense or in other causes change in inductance and can reach extreme values at the superposition of nucleus and coil centers. The variation of the inductance and the degree of freedom of movement of the nucleus can lead to a device with electromechanical conversion The aim of this paper is the determination and visualization of self inductance and mutual of the (C.I.N.C based on geometric dimensions and the displacement of the nucleus.  

  6. Surface Fatigue Resistance with Induction Hardening

    Science.gov (United States)

    Townsend, Dennis; Turza, Alan; Chapman, Mike

    1996-01-01

    Induction hardening has been used for some years to harden the surface and improve the strength and service life of gears and other components. Many applications that employ induction hardening require a relatively long time to finish the hardening process and controlling the hardness of the surface layer and its depth often was a problem. Other surface hardening methods, ie., carbonizing, take a very long time and tend to cause deformations of the toothing, whose elimination requires supplementary finishing work. In double-frequency induction hardening, one uses a low frequency for the preheating of the toothed wheel and a much higher frequency for the purpose of rapidly heating the surface by way of surface hardening.

  7. Application and Perspectives of Multiphase Induction Motors

    Directory of Open Access Journals (Sweden)

    Benas Kundrotas

    2012-04-01

    Full Text Available The article considers the areas of applying multiphase induction motors. Their advantages against three phase motors have become the main reason for employing them in multiphase drives. The paper deals with the six-phase induction motor having two similar three phase windings in the stator shifted by 30 degrees in space and three phase windings in the rotor. Differential equations for this motor are presented and transformed to dq synchronous reference frame. The transformed equations are expressed in a matrix form and solved by MATLAB software using the Dormand-Prince (ode45 method. The transient characteristics of the torque, speed and current of the six-phase induction motor are calculated and discussed.Article in Lithuanian

  8. A logic for inductive probabilistic reasoning

    DEFF Research Database (Denmark)

    Jaeger, Manfred

    2005-01-01

    Inductive probabilistic reasoning is understood as the application of inference patterns that use statistical background information to assign (subjective) probabilities to single events. The simplest such inference pattern is direct inference: from '70% of As are Bs" and "a is an A" infer...... that a is a B with probability 0.7. Direct inference is generalized by Jeffrey's rule and the principle of cross-entropy minimization. To adequately formalize inductive probabilistic reasoning is an interesting topic for artificial intelligence, as an autonomous system acting in a complex environment may have...... to base its actions on a probabilistic model of its environment, and the probabilities needed to form this model can often be obtained by combining statistical background information with particular observations made, i.e., by inductive probabilistic reasoning. In this paper a formal framework...

  9. Constructive induction of features for planning

    Energy Technology Data Exchange (ETDEWEB)

    van Lent, M. [Univ. of Michigan, Ann Arbor, MI (United States)

    1996-12-31

    Constructive induction techniques use constructors to combine existing features into new features. Usually the goal is to improve the accuracy and/or efficiency of classification. An alternate use of new features is to create representations which allow planning in more efficient state spaces. An inefficient state space may be too fine grained, requiring deep search for plans with many steps, may be too fragmented, requiring separate plans for similar cases, or may be unfocused, resulting in poorly directed search. Modifying the representation with constructive induction can improve the state space and overcome these inefficiencies. Additionally, since most learning systems depend on good domain features, constructive induction will compliment the action of other algorithms.

  10. Compact inductive energy storage pulse power system.

    Science.gov (United States)

    K, Senthil; Mitra, S; Roy, Amitava; Sharma, Archana; Chakravarthy, D P

    2012-05-01

    An inductive energy storage pulse power system is being developed in BARC, India. Simple, compact, and robust opening switches, capable of generating hundreds of kV, are key elements in the development of inductive energy storage pulsed power sources. It employs an inductive energy storage and opening switch power conditioning techniques with high energy density capacitors as the primary energy store. The energy stored in the capacitor bank is transferred to an air cored storage inductor in 5.5 μs through wire fuses. By optimizing the exploding wire parameters, a compact, robust, high voltage pulse power system, capable of generating reproducibly 240 kV, is developed. This paper presents the full details of the system along with the experimental data.

  11. Induction surface hardening of hard coated steels

    DEFF Research Database (Denmark)

    Pantleon, Karen; Kessler, Olaf; Hoffmann, Franz

    1999-01-01

    -process is the high deposition temperature, consequently the properties of steel substrates are negatively influenced. Therefore, a subsequent heat treatment of the coated steels is necessary to restore the properties of steels ready for operation. Induction surface hardening is used as a method of heat treatment....... The effect of induction surface hardening on the properties of the coating-substrate-systems is mainly characterized using investigations of microstructure and chemical composition as well as measurements of hardness and residual stresses in dependence on the distance from the surface. Furthermore......, the scratch test is used to estimate critical loads for cohesive and adhesive failure of the coatings. Additionally, distortion measurements are carried out. The results emphasize the advantage of induction surface hardening as a method of subsequent heat treatment of CVD-coated steels....

  12. A theory evaluation of an induction programme

    Directory of Open Access Journals (Sweden)

    Kenrick Hendricks

    2012-07-01

    Full Text Available Orientation: An induction programme is commonly used to help new employees understand their job within the organisation. Research purpose: The main aim of this study was to examine whether or not the programme theory of an induction programme was plausible and would lead to the intended outcomes as described by the programme manager.Motivation for the study: Induction training is one of the most common training programmes in an organisation. However, there is little research to evaluate whether or not the activities of an induction programme will lead to the intended outcomes of such a programme.Research design, approach and method: This theory evaluation used a descriptive design. One hundred and thirteen employees of a media company completed a ten-item, five-point Likert scale which measured their perceptions of the programme’s outcome, identification with the organisation and intentions to stay with the organisation.Main findings: From this theory evaluation it was apparent that an induction programme based on an implausible programme theory could be problematic. An implausible programme theory affects the design of the programme activities and unsuitable activities may not deliver the desired outcomes.Practical/managerial implications: The intention of the evaluation is to guide human resource managers through a process of replacing an implausible programme theory with one that is plausible, and which ensures better alignment of programme activities and outcomes.Contribution/value-add: The evaluators showed how a plausible programme theory could improve programme design. This redesigned induction programme may lead to benefits, such as staff retention and company identification, rather than the vague assumption that it has been conforming to a legal obligation.

  13. Modelling imperfect adherence to HIV induction therapy

    Directory of Open Access Journals (Sweden)

    Smith? Robert J

    2010-01-01

    Full Text Available Abstract Background Induction-maintenance therapy is a treatment regime where patients are prescribed an intense course of treatment for a short period of time (the induction phase, followed by a simplified long-term regimen (maintenance. Since induction therapy has a significantly higher chance of pill fatigue than maintenance therapy, patients might take drug holidays during this period. Without guidance, patients who choose to stop therapy will each be making individual decisions, with no scientific basis. Methods We use mathematical modelling to investigate the effect of imperfect adherence during the inductive phase. We address the following research questions: 1. Can we theoretically determine the maximal length of a possible drug holiday and the minimal number of doses that must subsequently be taken while still avoiding resistance? 2. How many drug holidays can be taken during the induction phase? Results For a 180 day therapeutic program, a patient can take several drug holidays, but then has to follow each drug holiday with a strict, but fairly straightforward, drug-taking regimen. Since the results are dependent upon the drug regimen, we calculated the length and number of drug holidays for all fifteen protease-sparing triple-drug cocktails that have been approved by the US Food and Drug Administration. Conclusions Induction therapy with partial adherence is tolerable, but the outcome depends on the drug cocktail. Our theoretical predictions are in line with recent results from pilot studies of short-cycle treatment interruption strategies and may be useful in guiding the design of future clinical trials.

  14. Backstepping Sliding Mode Control for Induction Motor

    Directory of Open Access Journals (Sweden)

    Othmane Boughazi

    2014-12-01

    Full Text Available This work treats the modeling and simulation of non-linear system behavior of an induction motor using backstepping sliding mode control. First, the direct field oriented control IM is derived. Then, a sliding for direct field oriented control is proposed to compensate the uncertainties, which occur in the control.Finally, the study of Backstepping sliding controls strategy of the induction motor drive. Our non linear system is simulated in MATLAB SIMULINK environment, the results obtained illustrate the efficiency of the proposed control with no overshoot, and the rising time is improved with good disturbances rejections comparing with the classical control law.

  15. Backstepping Strategy for Induction Motor Control

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    2000-01-01

    Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping with a s......Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping...

  16. Symmetric Structure of Induction Motor Systems

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In this paper, symmetric structure of induction motor system in stationary αβ0 coordinates is studied bythe geometric approach. The results show that the system possesses symmetry (G, θ, Ф) and infinitesimal symme-try. Under certain conditions, the system can be transformed into a form possessing state-space symmetry (G, Ф)and infinitesimal state-space symmetry by means of state feedback and input coordinate base transform. The resultscan be extended to the fifth order induction motor system fed by hysteresis-band current-controlled PWM inverter.

  17. Induction surface hardening of hard coated steels

    DEFF Research Database (Denmark)

    Pantleon, Karen; Kessler, Olaf; Hoffmann, Franz

    1999-01-01

    . The effect of induction surface hardening on the properties of the coating-substrate-systems is mainly characterized using investigations of microstructure and chemical composition as well as measurements of hardness and residual stresses in dependence on the distance from the surface. Furthermore......, the scratch test is used to estimate critical loads for cohesive and adhesive failure of the coatings. Additionally, distortion measurements are carried out. The results emphasize the advantage of induction surface hardening as a method of subsequent heat treatment of CVD-coated steels....

  18. A Novel Induction Algorithm for DM

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    DM usually means an efficient knowledge discovery from database, and the immune algorithm is a biological theory-based and global searching algorithm. A novel induction algorithm is proposed here which integrates a power of individual immunity and an evolutionary mechanism of population. This algorithm does not take great care of discovering some classifying information, but unknown knowledge or a predication on higher level rules. Theoretical analysis and simulations both show that this algorithm is prone to the stabilization of a population and the improvement of entire capability, and also keeping a high degree of preciseness during the rule induction.

  19. About Eddy Currents in Induction Melting Processes

    Directory of Open Access Journals (Sweden)

    Gafiţa Nicolae-Bogdan

    2008-05-01

    Full Text Available In this paper we present a method forcomputing the eddy currents in induction meltingprocesses for non-ferrous alloys. We take intoconsideration the situation when only the crucible ismoving, inside the coils. This fact makes differentialcomputation methods to be hard to apply, because isnecessary to generate a new mesh and a new systemmatrix for every for every new position of the cruciblerelated to the coils. Integral methods cancel thisdrawback because the mesh is generated only for thedomains with eddy currents. For integral methods, themesh and the inductance matrix remain unchangedduring the movement of the crucible; only the free termsof the equation system will change.

  20. A model of annular linear induction pumps

    Energy Technology Data Exchange (ETDEWEB)

    Momozaki, Yoichi [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-10-27

    The present work explains how the magnetic field and the induced current are obtained when the distributed coils are powered by a 3 phase power supply.  From the magnetic field and the induced current, the thrust and the induction losses in the pump can be calculated to estimate the pump performance.

  1. New Teacher Induction: A Program Evaluation

    Science.gov (United States)

    Hunter, J. Warren

    2016-01-01

    The purpose of this qualitative program evaluation was to examine the impact a two-year new teacher induction program had on teachers' feelings of support, satisfaction, and self-efficacy. The program purports that higher feelings of support, satisfaction, and self-efficacy in teachers will lead to lower teacher attrition. In turn, research shows…

  2. Ovulation induction in normogonadotropic anovulation (PCOS)

    NARCIS (Netherlands)

    van Santbrink, Evert J. P.; Fauser, Bart C. J. M.

    2006-01-01

    Treatment of normogonadotropic anovulatory infertility (World Health Organization class 2, or WHO2) is by induction of ovulation using clomiphene citrate (CC), followed by follicle-stimulating hormone (FSH) in cases of treatment failure. Not all patients will become ovulatory or will conceive with t

  3. A Successful Induction into the Teaching Profession

    Science.gov (United States)

    Cochran, Lori; Reese, Susan

    2007-01-01

    For the new career and technical education (CTE) teacher, a teacher induction program and peer mentoring can make the first year a much more positive experience. In this article, the authors describe the Missouri Center for Career Education's (MCCE) teacher support systems intended to help new teachers succeed. These include the New Teacher…

  4. Single phase induction motor with starting performance

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, M.; Demeter, E. [Research Institute for Electrical Machines, ICPE-ME, Bucharest (Romania); Navrapescu, V. [University `Politehnica` Bucharest, Electrical Engineering Faculty Splaiul Independentei, Bucharest (Romania)

    1997-12-31

    The paper presents problems related to a special type of single phase induction motor. The main novelty consists in the use of a conducting (aluminium casted) shell distributed on the periferic region of the rotor. As a result the starting performance, as well as the rated ones, is much improved in comparison with the conventional construction. (orig.) 4 refs.

  5. Inductors and Inductance-Resistance Networks.

    Science.gov (United States)

    Kirwin, Gerald J.

    This programed booklet presents ideas related to inductors and inductance--resistance networks. It is designed for the engineering student who is familiar with differential equations and electrical networks. A variety of cases are considered with the idea of developing in the student a broad acquaintance with the inductor response. The booklet is…

  6. Inductions and coinductions for Hopf extensions

    Institute of Scientific and Technical Information of China (English)

    Freddy Van Oystaeyen; 许永华; 张印火

    1996-01-01

    The induction and coinduction functors for the two types of Hopf extensions (Hopf Galois extensions and dual to Hopf Galois extension) and the symmetry between them are studied; by using the theory of separable functors further links between these two classes are provided.

  7. Mathematical Induction, Difference Equations and Divisibility

    Science.gov (United States)

    McAndrew, Alasdair

    2009-01-01

    Many exercises in mathematical induction require the student to prove a divisibility property of a function of the integers. Such problems are generally presented as being independent of each other. However, many of these problems can be presented in terms of difference equations, and the theory of difference equations can be used to provide a…

  8. Playing with Dominoes: Proof by Induction

    Science.gov (United States)

    Kaplan, Gail

    2009-01-01

    This article describes a hands-on approach to learning proofs by induction. Students create patterns of dominos so that when the first domino is pushed, the entire design collapses, one domino at a time. Students then build designs that do not work. By constructing a list of conditions that ensure a given pattern will collapse, students discover…

  9. Students' Difficulties with Proof by Mathematical Induction.

    Science.gov (United States)

    Baker, John Douglas

    The cognitive difficulties encountered by 40 high school and 13 college students beginning to learn the proof technique of mathematical induction were investigated. Students provided data in the form of proof-writing and proof-analysis tasks followed by interviews to clarify their written responses. Both groups of students had significant…

  10. Toward a unified chromatic induction model.

    Science.gov (United States)

    Otazu, Xavier; Parraga, C Alejandro; Vanrell, Maria

    2010-10-01

    In a previous work (X. Otazu, M. Vanrell, & C. A. Párraga, 2008b), we showed how several brightness induction effects can be predicted using a simple multiresolution wavelet model (BIWaM). Here we present a new model for chromatic induction processes (termed Chromatic Induction Wavelet Model or CIWaM), which is also implemented on a multiresolution framework and based on similar assumptions related to the spatial frequency and the contrast surround energy of the stimulus. The CIWaM can be interpreted as a very simple extension of the BIWaM to the chromatic channels, which in our case are defined in the MacLeod-Boynton (lsY) color space. This new model allows us to unify both chromatic assimilation and chromatic contrast effects in a single mathematical formulation. The predictions of the CIWaM were tested by means of several color and brightness induction experiments, which showed an acceptable agreement between model predictions and psychophysical data.

  11. Backstepping Strategy for Induction Motor Control

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    2000-01-01

    Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping with a s...

  12. Validating Inductive Hypotheses by Mode Inference

    Institute of Scientific and Technical Information of China (English)

    王志坚

    1993-01-01

    Sme criteria based on mode inference for validating inductive hypotheses are presented in this paper.Mode inference is caried out mechanically,thus such kind of validation can result in low overhead in consistency check and high efficiency in performance.

  13. Linear Parameter Varying Control of Induction Motors

    DEFF Research Database (Denmark)

    Trangbæk, Klaus

    for high performance applications. This thesis demonstrates how LPV control theory provides a systematic way to achieve good performance for these problems. The main contributions of this thesis are the application of the LPV control theory to induction motor control as well as various contributions...... to the field of LPV control theory itself...

  14. KSHV Induction of Angiogenic and Lymphangiogenic Phenotypes

    Directory of Open Access Journals (Sweden)

    Terri A. DiMiao

    2012-03-01

    Full Text Available Kaposi’s Sarcoma is a highly vascularized tumor supporting large amounts of neo-angiogenesis. The major cell type in KS tumors is the spindle cell, a cell that expresses markers of lymphatic endothelium. KSHV, the etiologic agent of KS, is found in the spindle cells of all KS tumors. Considering the extreme extent of angiogenesis in KS tumors at all stages it has been proposed that KSHV directly induces angiogenesis in a paracrine fashion. In accordance with this theory, KSHV infection of endothelial cells in culture induces a number of host pathways involved in activation of angiogenesis and a number of KSHV genes themselves can induce pathways involved in angiogenesis. Because spindle cells are phenotypically endothelial in nature, activation through the induction of angiogenic and/or lymphangiogenic phenotypes by the virus may also be directly involved in spindle cell growth and tumor induction. Accordingly, KSHV infection of endothelial cells induces cell autonomous angiogenic phenotypes to activate host cells. KSHV infection can also reprogram blood endothelial cells to lymphatic endothelium. However, KSHV induces some blood endothelial specific genes upon infection of lymphatic endothelial cells creating a phenotypic intermediate between blood and lymphatic endothelium. Induction of pathways involved in angiogenesis and lymphangiogenesis are likely to be critical for tumor cell growth and spread. Thus, induction of both cell autonomous and non-autonomous changes in angiogenic and lymphangiogenic pathways by KSHV likely plays a key role in the formation of KS tumors.

  15. Socialization of New Teachers: Does Induction Matter?

    Science.gov (United States)

    Nasser-Abu Alhija, Fadia; Fresko, Barbara

    2010-01-01

    The present paper focuses on new teachers' satisfaction with their first year of teaching from the perspective of socialization. The relationship between satisfaction with socialization and teacher background, school environment, placement, and induction variables was examined. Data were collected from 243 Israeli beginning teachers by means of…

  16. Development of advanced inductive scenarios for ITER

    NARCIS (Netherlands)

    Luce, T. C.; Challis, C. D.; Ide, S.; Joffrin, E.; Kamada, Y.; Polizer, P. A.; Schweinzer, J.; Sips, A.C.C.; Stober, J.; Giruzzi, G.; Kessel, C. E.; Murakami, M.; Na, Y.-S.; Park, J. M.; Polevoi, A. R.; Budny, R. V.; Citrin, J.; Garcia, J.; Hayashi, N.; Hobirk, J.; Hudson, B. F.; Imbeaux, F.; Isayama, A.; McDonald, D. C.; Nakano, T.; Oyama, N.; Parail, V.V.; Petrie, T. W.; Petty, C. C.; Suzuki, T.; Wade, M. R.

    2014-01-01

    Since its inception in 2002, the International Tokamak Physics Activity topical group on Integrated Operational Scenarios (IOS) has coordinated experimental and modelling activity on the development of advanced inductive scenarios for applications in the ITER tokamak. The physics basis and the prosp

  17. Inductive ionospheric solver for magnetospheric MHD simulations

    Directory of Open Access Journals (Sweden)

    H. Vanhamäki

    2011-01-01

    Full Text Available We present a new scheme for solving the ionospheric boundary conditions required in magnetospheric MHD simulations. In contrast to the electrostatic ionospheric solvers currently in use, the new solver takes ionospheric induction into account by solving Faraday's law simultaneously with Ohm's law and current continuity. From the viewpoint of an MHD simulation, the new inductive solver is similar to the electrostatic solvers, as the same input data is used (field-aligned current [FAC] and ionospheric conductances and similar output is produced (ionospheric electric field. The inductive solver is tested using realistic, databased models of an omega-band and westward traveling surge. Although the tests were performed with local models and MHD simulations require a global ionospheric solution, we may nevertheless conclude that the new solution scheme is feasible also in practice. In the test cases the difference between static and electrodynamic solutions is up to ~10 V km−1 in certain locations, or up to 20-40% of the total electric field. This is in agreement with previous estimates. It should also be noted that if FAC is replaced by the ground magnetic field (or ionospheric equivalent current in the input data set, exactly the same formalism can be used to construct an inductive version of the KRM method originally developed by Kamide et al. (1981.

  18. Developing Best Practices of Teacher Induction

    Science.gov (United States)

    Moore, Lori L.; Swan, Benjamin G.

    2008-01-01

    Problems and challenges faced by beginning teachers have been well documented in the literature and have created the need for teacher induction programs in all disciplines, including agricultural education. This paper used literature from inside and outside the agricultural education discipline to identify and describe best practices in teacher…

  19. Rethinking Reinforcement: Allocation, Induction, and Contingency

    Science.gov (United States)

    Baum, William M.

    2012-01-01

    The concept of reinforcement is at least incomplete and almost certainly incorrect. An alternative way of organizing our understanding of behavior may be built around three concepts: "allocation," "induction," and "correlation." Allocation is the measure of behavior and captures the centrality of choice: All behavior entails choice and consists of…

  20. Junctional communication of embryonic cells after induction

    Institute of Scientific and Technical Information of China (English)

    ZengMibai; JiangWansu

    1990-01-01

    Cell couplings before and after neural induction in embryos of Cynops orientalis were studied by means of single cell injection of Lucifer Yellow.Differences both in incidence and the extent of cell couplings were demonstrated.Results of cell couplings were correlated with electron microscopic observations of freeze-etching replicas.

  1. Remote effects in real induction arrows

    Directory of Open Access Journals (Sweden)

    A. Ádám

    2002-06-01

    Full Text Available In August 2001, Annali di Geofisica, 44 (4, pp. 659-669, published the paper: «Anomalous directional behaviour of the real parts of the induction arrows in the Eastern Alps: tectonic and palaeogeographic implications» written by Marcus Gurk and Pierre-André Schnegg. Concerning this paper we have two brief comments.

  2. Demonstration Model of Self Inductance Using Relay

    Indian Academy of Sciences (India)

    2016-05-01

    Using an electrical component like a relay, the phenomenonof self inductance caneasily be demonstrated to undergraduatestudents. By wiring simple electrical components like relay,neon bulb and a DC power supply, intermittent backelectromotive force (emf) can be generated in the range from60 to 100 volt. The glowing of neon bulb provides visualevidence for the generation of large back emf due to selfinductance.

  3. Four quadrant control of induction motors

    Science.gov (United States)

    Hansen, Irving G.

    1991-03-01

    Induction motors are the nation's workhorse, being the motor of choice in most applications due to their simple rugged construction. It has been estimated that 14 to 27 percent of the country's total electricity use could be saved with adjustable speed drives. Until now, induction motors have not been suited well for variable speed or servo-drives, due to the inherent complexity, size, and inefficiency of their variable speed controls. Work at NASA Lewis Research Center on field oriented control of induction motors using pulse population modulation method holds the promise for the desired drive electronics. The system allows for a variable voltage to frequency ratio which enables the user to operate the motor at maximum efficiency, while having independent control of both the speed and torque of an induction motor in all four quadrants of the speed torque map. Multiple horsepower machine drives were demonstrated, and work is on-going to develop a 20 hp average, 40 hp peak class of machine. The pulse population technique, results to date, and projections for implementation of this existing new motor control technology are discussed.

  4. Between autobiography and reality : Popper's inductive years

    NARCIS (Netherlands)

    ter Hark, M.R.M.

    On the basis of his unpublished thesis 'Gewohnheit und Gesetzerlebnis in der Erziehung' (1926-7) a historical reconstruction is given of the genesis of Popper's ideas on induction and demarcation which differs radically from his own account in Unended quest. It is shown not only that he

  5. Inductive Reasoning about Causally Transmitted Properties

    Science.gov (United States)

    Shafto, Patrick; Kemp, Charles; Bonawitz, Elizabeth Baraff; Coley, John D.; Tenenbaum, Joshua B.

    2008-01-01

    Different intuitive theories constrain and guide inferences in different contexts. Formalizing simple intuitive theories as probabilistic processes operating over structured representations, we present a new computational model of category-based induction about causally transmitted properties. A first experiment demonstrates undergraduates'…

  6. Teaching Inductive Reasoning in Primary Education.

    Science.gov (United States)

    de Koning, Els; Hamers, Jo H. M.; Sijtsma, Klaas; Vermeer, Adri

    2002-01-01

    Used a three-phase teaching procedure based on the development of metacognition to extend emphasis on inductive reasoning in primary education to Grades 3 and 4. Found that teachers could apply the programs as intended, but needed support to shift attention from reasoning product to reasoning process. Program learning effects indicated that better…

  7. Relations between Inductive Reasoning and Deductive Reasoning

    Science.gov (United States)

    Heit, Evan; Rotello, Caren M.

    2010-01-01

    One of the most important open questions in reasoning research is how inductive reasoning and deductive reasoning are related. In an effort to address this question, we applied methods and concepts from memory research. We used 2 experiments to examine the effects of logical validity and premise-conclusion similarity on evaluation of arguments.…

  8. Free positioning for inductive wireless power system

    NARCIS (Netherlands)

    Waffenschmidt, E.

    2012-01-01

    In inductive wireless power transmission system a lateral displacement of the receiver coil to the transmitter coil leads to a change ofthe coupling factor and thus an unwanted variation of the power transfer. Here, an algorithm to determine the turn distribution to achieve homogeneous coupling betw

  9. High average-power induction linacs

    Energy Technology Data Exchange (ETDEWEB)

    Prono, D.S.; Barrett, D.; Bowles, E.; Caporaso, G.J.; Chen, Yu-Jiuan; Clark, J.C.; Coffield, F.; Newton, M.A.; Nexsen, W.; Ravenscroft, D.

    1989-03-15

    Induction linear accelerators (LIAs) are inherently capable of accelerating several thousand amperes of /approximately/ 50-ns duration pulses to > 100 MeV. In this paper we report progress and status in the areas of duty factor and stray power management. These technologies are vital if LIAs are to attain high average power operation. 13 figs.

  10. Playing with Dominoes: Proof by Induction

    Science.gov (United States)

    Kaplan, Gail

    2009-01-01

    This article describes a hands-on approach to learning proofs by induction. Students create patterns of dominos so that when the first domino is pushed, the entire design collapses, one domino at a time. Students then build designs that do not work. By constructing a list of conditions that ensure a given pattern will collapse, students discover…

  11. Two-phase induction motor drives

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Lungeanu, Florin; Skaug, Kenneth

    2004-01-01

    in efficiency, reliability, torque-per-volume/mass ratio, maintenance, and service life. Despite this effort, the industry seems to be responding with manifest rigidity in changing standard induction motor solutions when considering the installed volume into the field, the investment in manufacturing base...

  12. Inductive ionospheric solver for magnetospheric MHD simulations

    Science.gov (United States)

    Vanhamäki, H.

    2011-01-01

    We present a new scheme for solving the ionospheric boundary conditions required in magnetospheric MHD simulations. In contrast to the electrostatic ionospheric solvers currently in use, the new solver takes ionospheric induction into account by solving Faraday's law simultaneously with Ohm's law and current continuity. From the viewpoint of an MHD simulation, the new inductive solver is similar to the electrostatic solvers, as the same input data is used (field-aligned current [FAC] and ionospheric conductances) and similar output is produced (ionospheric electric field). The inductive solver is tested using realistic, databased models of an omega-band and westward traveling surge. Although the tests were performed with local models and MHD simulations require a global ionospheric solution, we may nevertheless conclude that the new solution scheme is feasible also in practice. In the test cases the difference between static and electrodynamic solutions is up to ~10 V km-1 in certain locations, or up to 20-40% of the total electric field. This is in agreement with previous estimates. It should also be noted that if FAC is replaced by the ground magnetic field (or ionospheric equivalent current) in the input data set, exactly the same formalism can be used to construct an inductive version of the KRM method originally developed by Kamide et al. (1981).

  13. Is spacing really the 'friend of induction'?

    NARCIS (Netherlands)

    P.P.J.L. Verkoeijen (Peter); S. Bouwmeester (Samantha)

    2014-01-01

    textabstractInductive learning takes place when people learn a new concept or category by observing a variety of exemplars. Kornell and Bjork (2008) asked participants to learn new painting styles either by presenting different paintings of the same artist consecutively (massed presentation) or by

  14. Thyristor stack for pulsed inductive plasma generation.

    Science.gov (United States)

    Teske, C; Jacoby, J; Schweizer, W; Wiechula, J

    2009-03-01

    A thyristor stack for pulsed inductive plasma generation has been developed and tested. The stack design includes a free wheeling diode assembly for current reversal. Triggering of the device is achieved by a high side biased, self supplied gate driver unit using gating energy derived from a local snubber network. The structure guarantees a hard firing gate pulse for the required high dI/dt application. A single fiber optic command is needed to achieve a simultaneous turn on of the thyristors. The stack assembly is used for switching a series resonant circuit with a ringing frequency of 30 kHz. In the prototype pulsed power system described here an inductive discharge has been generated with a pulse duration of 120 micros and a pulse energy of 50 J. A maximum power transfer efficiency of 84% and a peak power of 480 kW inside the discharge were achieved. System tests were performed with a purely inductive load and an inductively generated plasma acting as a load through transformer action at a voltage level of 4.1 kV, a peak current of 5 kA, and a current switching rate of 1 kA/micros.

  15. Induction accelerator development for heavy ion fusion

    Energy Technology Data Exchange (ETDEWEB)

    Reginato, L.L.

    1993-05-01

    For approximately a decade, the Heavy Ion Fusion Accelerator Research (HIFAR) group at LBL has been exploring the use of induction accelerators with multiple beams as the driver for inertial fusion targets. Scaled experiments have investigated the transport of space charge dominated beams (SBTE), and the current amplification and transverse emittance control in induction linacs (MBE-4) with very encouraging results. In order to study many of the beam manipulations required by a driver and to further develop economically competitive technology, a proposal has been made in partnership with LLNL to build a 10 MeV accelerator and to conduct a series of experiments collectively called the Induction Linac System Experiments (ILSE). The major components critical to the ILSE accelerator are currently under development. We have constructed a full scale induction module and we have tested a number of amorphous magnetic materials developed by Allied Signal to establish an overall optimal design. The electric and magnetic quadrupoles critical to the transport and focusing of heavy ion beams are also under development The hardware is intended to be economically competitive for a driver without sacrificing any of the physics or performance requirements. This paper will concentrate on the recent developments and tests of the major components required by the ILSE accelerator.

  16. Induction accelerator development for heavy ion fusion

    Energy Technology Data Exchange (ETDEWEB)

    Reginato, L.L.

    1993-05-01

    For approximately a decade, the Heavy Ion Fusion Accelerator Research (HIFAR) group at LBL has been exploring the use of induction accelerators with multiple beams as the driver for inertial fusion targets. Scaled experiments have investigated the transport of space charge dominated beams (SBTE), and the current amplification and transverse emittance control in induction linacs (MBE-4) with very encouraging results. In order to study many of the beam manipulations required by a driver and to further develop economically competitive technology, a proposal has been made in partnership with LLNL to build a 10 MeV accelerator and to conduct a series of experiments collectively called the Induction Linac System Experiments (ILSE).The major components critical to the ILSE accelerator are currently under development. We have constructed a full scale induction module and we have tested a number of amorphous magnetic materials developed by Allied Signal to establish an overall optimal design. The electric and magnetic quadrupoles critical to the transport and focusing of heavy ion beams are also under development. The hardware is intended to be economically competitive for a driver without sacrificing any of the physics or performance requirements. This paper will concentrate on the recent developments and tests of the major components required by the ILSE accelerator.

  17. Progress in antenna coupled kinetic inductance detectors

    NARCIS (Netherlands)

    Baryshev, A.; Baselmans, J.J.A.; Freni, A.; Gerini, G.; Hoevers, H.; Iacono, A.; Neto, A.

    2011-01-01

    This paper describes the combined Dutch efforts toward the development of large wideband focal plane array receivers based on kinetic inductance detectors (KIDs). Taking into account strict electromagnetic and detector sensitivity requirements for future ground and space based observatories, this wo

  18. IT induction and information security awareness

    CERN Document Server

    Maddock, Valerie

    2010-01-01

    This pocket guide offers practical advice on how to develop an IT Induction programme for staff that can help safeguard business information. By providing employees with simple instruction in good IT working practices, and by making sure they know what is expected of them, a company can strengthen their information security and reduce the risk that data will be stolen or lost.

  19. The Fourth Domain of Educational Objectives: Induction.

    Science.gov (United States)

    Holleman, Wes

    1985-01-01

    Tests the claim to comprehensiveness of Bloom's taxonomy of educational objectives by analyzing educational objectives of some freshmen orientation programs and those connected with human developmental tasks. It is concluded that the taxonomy should be enlarged with a fourth domain: actual induction into tasks for which students are being…

  20. Sliding Mode Control of Induction Motor Phase Currents

    DEFF Research Database (Denmark)

    Hansen, R.B.; Hattel, T.; Bork, J

    1995-01-01

    Sliding mode control of induction motor phase currents are investigated through development of two control concepts.......Sliding mode control of induction motor phase currents are investigated through development of two control concepts....

  1. Self-Tuning Speed Regulator for CVC Induction Motor Drive

    DEFF Research Database (Denmark)

    Bidstrup, N.; Rasmussen, Henrik; Knudsen, Torben

    1994-01-01

    A self-tuning speed regulator for a current vector controlled induction motor drive has been designed.......A self-tuning speed regulator for a current vector controlled induction motor drive has been designed....

  2. Sliding Mode Control of Induction Motor Phase Currents

    DEFF Research Database (Denmark)

    Hansen, R.B.; Hattel, T.; Bork, J

    1995-01-01

    Sliding mode control of induction motor phase currents are investigated through development of two control concepts.......Sliding mode control of induction motor phase currents are investigated through development of two control concepts....

  3. Reasons Why Students Have Difficulties with Mathematical Induction

    Science.gov (United States)

    Andrew, Lane

    2007-01-01

    Many difficulties surrounding mathematical induction have been described by researchers. In this paper, I describe several underlying causes for these difficulties. In particular, the symbolic nature of induction is discussed, along with student cognitive levels, validation abilities, and proof schemes.

  4. Titrated oral misoprostol solution- a new method of labour induction ...

    African Journals Online (AJOL)

    Titrated oral misoprostol solution- a new method of labour induction. ... a cheap, stable, orally active prostaglandin analogue, is effective for labour induction ... misoprostol doses commencing with 20 μg, increased after three doses to 40 μg.

  5. High Quality Factor Resonators for Inductive Power Transfer Systems

    Science.gov (United States)

    Etemadrezaei, Mohammad

    In this dissertation, the Inductive Power Transfer (IPT) systems for multi-MHz frequency of operation are investigated, and new ideas for magnetic link inductive coils are presented. (Abstract shortened by ProQuest.).

  6. Interleukin-2 receptor antagonists as induction therapy after heart transplantation

    DEFF Research Database (Denmark)

    Møller, Christian H; Gustafsson, Finn; Gluud, Christian;

    2008-01-01

    About half of the transplantation centers use induction therapy after heart transplantation. Interleukin-2 receptor antagonists (IL-2Ras) are used increasingly for induction therapy. We conducted a systematic review of randomized trials assessing IL-2Ras.......About half of the transplantation centers use induction therapy after heart transplantation. Interleukin-2 receptor antagonists (IL-2Ras) are used increasingly for induction therapy. We conducted a systematic review of randomized trials assessing IL-2Ras....

  7. Depressive Mood Induction: The Reactivity of Positive Affect.

    Science.gov (United States)

    Zevon, Michael A.; And Others

    Mood induction procedures have been widely used as laboratory analogues of depression. This study evaluated the effectiveness of the Velten depression mood induction (VMI) procedure and a personal recall depression induction (PRI) procedure. In contrast to prior research, mood was assessed in terms of two independent dimensions: positive affect…

  8. Cognitive Trait Modelling: The Case of Inductive Reasoning Ability

    Science.gov (United States)

    Kinshuk, Taiyu Lin; McNab, Paul

    2006-01-01

    Researchers have regarded inductive reasoning as one of the seven primary mental abilities that account for human intelligent behaviours. Researchers have also shown that inductive reasoning ability is one of the best predictors for academic performance. Modelling of inductive reasoning is therefore an important issue for providing adaptivity in…

  9. Teacher Induction Programs: The Impact of Years Three and Four

    Science.gov (United States)

    Kneer, M. Joseph, Jr.; Reiter, Jana; Shackelford, Beth M.

    2009-01-01

    This is a problem-based learning project that focused on a discrepancy in program content and retention rates between two-year teacher induction programs and induction programs that last three or four years. It specifically focused on the impact induction has on new teacher perceptions and teacher retention. The project also examined the influence…

  10. Mutation induction by ion beams in plants

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Atsushi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2001-03-01

    The effect of ion beams such as C, He, and Ne ions was investigated on the mutation induction in plants with the expectation that ion beams of high linear energy transfer (LET) can frequently produce large DNA alternation such as inversion, translocation and large deletion rather than point mutation. Mutation frequency was investigated using Arabidopsis visible phenotype loci and was 8 to 33 fold higher for 220 MeV carbon ions than for electrons. Mutation spectrum was investigated on the flower color of chrysanthemum cv to find that flower mutants induced by ion beams show complex and stripe types rather than single color. Polymerase chain reaction analysis was performed to investigate DNA alteration of mutations. In conclusion, the characteristics of ion beams for the mutation induction are 1) high frequency, 2) broad mutation spectrum, and 3) novel mutants. (S. Ohno)

  11. A general law for electromagnetic induction

    CERN Document Server

    Giuliani, Giuseppe

    2015-01-01

    The definition of the induced $emf$ as the integral over a closed loop of the Lorentz force acting on a unit positive charge leads immediately to a general law for electromagnetic induction phenomena. The general law is applied to three significant cases: moving bar, Faraday's and Corbino's disc. This last application illustrates the contribution of the drift velocity of the charges to the induced $emf$: the magneto-resistance effect is obtained without using microscopic models of electrical conduction. Maxwell wrote down `general equations of electromotive intensity' that, integrated over a closed loop, yield the general law for electromagnetic induction, if the velocity appearing in them is correctly interpreted. The flux of the magnetic field through an arbitrary surface that have the circuit as contour {\\em is not the cause} of the induced $emf$. The flux rule must be considered as a calculation shortcut for predicting the value of the induced $emf$ when the circuit is filiform. Finally, the general law o...

  12. Scalable conditional induction variables (CIV) analysis

    DEFF Research Database (Denmark)

    Oancea, Cosmin Eugen; Rauchwerger, Lawrence

    2015-01-01

    the complexity of such induction variables is often due to their conditional evaluation across the iteration space of loops we name them Conditional Induction Variables (CIV). This paper presents a flow-sensitive technique that summarizes both such CIV-based and affine subscripts to program level, using the same...... representation. Our technique requires no modifications of our dependence tests, which is agnostic to the original shape of the subscripts, and is more powerful than previously reported dependence tests that rely on the pairwise disambiguation of read-write references. We have implemented the CIV analysis in our...... parallelizing compiler and evaluated its impact on five Fortran benchmarks. We have found that that there are many important loops using CIV subscripts and that our analysis can lead to their scalable parallelization. This in turn has led to the parallelization of the benchmark programs they appear in....

  13. Induction generator models in dynamic simulation tools

    DEFF Research Database (Denmark)

    Knudsen, Hans; Akhmatov, Vladislav

    1999-01-01

    For AC network with large amount of induction generators (windmills) the paper demonstrates a significant discrepancy in the simulated voltage recovery after fault in weak networks when comparing dynamic and transient stability descriptions and the reasons of discrepancies are explained. It is fo......For AC network with large amount of induction generators (windmills) the paper demonstrates a significant discrepancy in the simulated voltage recovery after fault in weak networks when comparing dynamic and transient stability descriptions and the reasons of discrepancies are explained....... It is found to be possible to include a transient model in dynamic stability tools and, then, obtain correct results also in dynamic tools. The representation of the rotating system influences on the voltage recovery shape which is an important observation in case of windmills, where a heavy mill is connected...

  14. The differential induction machine: Theory and performance

    Indian Academy of Sciences (India)

    Sumita Sinha; Nirmal K Deb; Nikhil Mondal; Sujit K Biswas

    2008-10-01

    This paper presents the theory and performance of a differential induction machine, which is a special type of induction machine having two shafts projected from the two ends of a single stator. Application of a differential load on the two shafts cause them to run at different speed as a motor, which permits true differential movement and thus can meet the requirements of a differential drive in an electric vehicle. The machine is also capable of regeneration in the differential mode. This paper presents the construction of the above machine and performance of the same based on experimental results from a laboratory prototype. The equivalent circuit of the motor has been presented and verified experimentally.

  15. Meta-learning in decision tree induction

    CERN Document Server

    Grąbczewski, Krzysztof

    2014-01-01

    The book focuses on different variants of decision tree induction but also describes  the meta-learning approach in general which is applicable to other types of machine learning algorithms. The book discusses different variants of decision tree induction and represents a useful source of information to readers wishing to review some of the techniques used in decision tree learning, as well as different ensemble methods that involve decision trees. It is shown that the knowledge of different components used within decision tree learning needs to be systematized to enable the system to generate and evaluate different variants of machine learning algorithms with the aim of identifying the top-most performers or potentially the best one. A unified view of decision tree learning enables to emulate different decision tree algorithms simply by setting certain parameters. As meta-learning requires running many different processes with the aim of obtaining performance results, a detailed description of the experimen...

  16. Demonstration of steady inductive helicity injection

    Science.gov (United States)

    Sieck, P. E.; Jarboe, T. R.; Izzo, V. A.; Hamp, W. T.; Nelson, B. A.; O'Neill, R. G.; Redd, A. J.; Smith, R. J.

    2006-02-01

    Initial results demonstrating the concept of constant inductive helicity injection are presented. Constant helicity injection is achieved using two oscillating inductive helicity injectors, with the goal of producing a bow tie spheromak. Each injector is a 180° segment of a reverse field pinch and they are driven 90° out of phase. Approximately 5 MW of power is injected during the 6 ms pulse, and the input power has been maintained at a fairly constant value by directly fuelling the injectors with neutral gas. Motivation for the experiment is given, including beta-limit calculations for the bow tie spheromak. Fuelling the injectors with neutral gas during the discharge is shown to produce injector parameters that are more constant in time. A series of discharges with increasing power input shows a promising increase in toroidal current. Unique construction techniques of the experiment are also described.

  17. Stator Fault Modelling of Induction Motors

    DEFF Research Database (Denmark)

    Thomsen, Jesper Sandberg; Kallesøe, Carsten

    2006-01-01

    measurements from a specially designed induction motor. With this motor it is possible to simulate both terminal disconnections, inter-turn and turn-turn short circuits. The results show good agreement between the measurements and the simulated signals obtained from the model. In the tests focus......In this paper a model of an induction motor affected by stator faults is presented. Two different types of faults are considered, these are; disconnection of a supply phase, and inter-turn and turn-turn short circuits inside the stator. The output of the derived model is compared to real...... is on the phase currents and the star point voltage as these signals are often used for fault detection....

  18. Inductive modelling of an entrepreneurial system

    OpenAIRE

    Yearworth, M

    2010-01-01

    We describe the development of a novel approach to generating theory about the behaviour of an entrepreneurial or start-up system. The new technology business creation system in and around the cities of Bath and Bristol in the UK was analysed using an inductive modelling approach that hybridises grounded theory with system dynamics, a technique we have called grounded systems modelling. Three models that represent the stages of development of an idea through to successful exploitation have be...

  19. Inductively coupled radio frequency methane plasma simulation

    Science.gov (United States)

    Bera, K.; Farouk, B.; Vitello, P.

    2001-05-01

    A self-consistent two-dimensional radio frequency inductively coupled glow discharge model has been developed in cylindrical coordinates using a fluid model. The objective of the study is to provide insight into charged species dynamics and investigate their effects on plasma process for a methane discharge. The model includes continuity and energy equations for electrons and continuity, momentum and energy equations for positive and negative ions. An electromagnetic model that considers the electric field due to the space charge within the plasma and due to inductive power coupling is also incorporated. For an inductively coupled methane discharge we expect to find higher fluxes of ions and radicals to the cathode, and hence a higher deposition/etch rate for a high-density plasma. The independent control of ion energy to the cathode in an inductively coupled discharge will facilitate control on film deposition/etch rate and uniformity on the wafer. Swarm data as a function of the electron energy are provided as input to the model. The model predicts the electron density, ion density and their fluxes and energies to the cathode. The radical and neutral densities in the discharge are calculated using a gas phase chemistry model. The diamond-like-carbon thin-film deposition/etch rate is predicted using a surface chemistry model. The gas phase chemistry model considers the diffusion of radicals and neutrals along with creation and loss terms. The surface deposition/etching process involves adsorption-desorption, adsorption layer reaction, ion stitching, direct ion incorporation and carbon sputtering.

  20. Antibody induction therapy for lung transplant recipients

    DEFF Research Database (Denmark)

    Penninga, Luit; Møller, Christian H; Penninga, Ida Elisabeth Irene

    2013-01-01

    Lung transplantation has become a valuable and well-accepted treatment option for most end-stage lung diseases. Lung transplant recipients are at risk of transplanted organ rejection, and life-long immunosuppression is necessary. Clear evidence is essential to identify an optimal, safe...... and effective immunosuppressive treatment strategy for lung transplant recipients. Consensus has not yet been achieved concerning use of immunosuppressive antibodies against T-cells for induction following lung transplantation....

  1. Low-Inductance Capacitor For Low Temperatures

    Science.gov (United States)

    Rhodes, David B.; Jones, Stephen B.; Franke, John M.

    1989-01-01

    Planar capacitor made on epoxy/fiberglass printed-circuit board. Planar design and flat copper plates ensure low inductance and low series resistance. Planar construction minimized effects of thermal contraction, and epoxy/fiberglass substrate ensured high breakdown voltage. Design is simple, and this type of capacitor easy for any printed-circuit-board facility to fabricate. Design suitable for any small-capacitance, high-voltage capacitor, whether operating at low or high temperature.

  2. Alternating Turing machines for inductive languages

    OpenAIRE

    Leivant, Daniel M

    2013-01-01

    We show that alternating Turing machines, with a novel and natural definition of acceptance, accept precisely the inductive (Pi-1-1) languages. Total alternating machines, that either accept or reject each input, accept precisely the hyper-elementary (Delta-1-1) languages. Moreover, bounding the permissible number of alternations yields a characterization of the levels of the arithmetical hierarchy. Notably, these results use simple finite computing devices, with finitary and discrete operati...

  3. Inductive limits and geometry of Banach spaces

    Science.gov (United States)

    Taskinen, Jari

    1999-01-01

    One of the main problems in the theory of inductive limits of Banach spaces is the projective description problem, finding a reasonable representation for the continuous seminorms. The problem is nontrivial even in the simplest cases. Recall that given, for example, an increasing sequence of Banach spaces (Yk)[infty infinity]k=1 with continuous embeddings Yk[hookrightarrow A: rt arrow-hooked]Yk+1 the inductive limit is the space Y=[cup B: union or logical sum]kYk endowed with the finest locally convex topology [tau] such that every embedding Yk[hookrightarrow A: rt arrow-hooked](Y, [tau]) becomes continuous. It is possible to give abstract definitions for families of continuous seminorms generating the topology [tau], but the connection with the norms of the step spaces Yk is not necessarily very close. For example, if the spaces Yk are Banach spaces of continuous functions endowed with weighted sup-norms, it is not clear if the continuous seminorms of the inductive limit are of the same type.We mention that inductive limits of spaces of continuous and holomorphic functions occur in many areas of analysis like linear partial differential operators, convolution equations [BD1], [E], complex and Fourier analysis and distribution theory. The projective description problem in these spaces has been thoroughly studied in [BMS1, BB1, BB2, BB3, BT, BM1, BM2], to mention some examples. We refer to the survey articles [BM1,BMS2, BB3]. The present work is also connected with the factorization problems which are treated in the book [Ju].

  4. Harmonic analysis of Doubly Fed Induction Generators

    DEFF Research Database (Denmark)

    Lindholm, Morten; Rasmussen, Tonny Wederberg

    2003-01-01

    This paper gives an overview of the frequency spectrum of the stator and rotor currents in a doubly fed induction generator (DFIG) used in wind power applications. The paper also presents a method to eliminate higher harmonics and interharmonics in the DFIG stator current. The method is implemented...... on a 40 kW laboratory model connected to the utility-grid, where the DFIG is supplied by a back-to-back 3-level NPC-converter....

  5. Emittance Growth in Linear Induction Accelerators

    OpenAIRE

    Ekdahl, Carl

    2017-01-01

    The Dual-Axis Radiographic Hydrotest (DARHT) facility uses bremsstrahlung radiation source spots produced by the focused electron beams from two linear induction accelerators (LIAs) to radiograph large hydrodynamic experiments driven by high explosives. Radiographic resolution is determined by the size of the source spot, and beam emittance is the ultimate limitation to spot size. Some of the possible causes for the emittance growth in the DARHT LIA have been investigated using particle-in-ce...

  6. Ovulation induction in polycystic ovary syndrome

    Directory of Open Access Journals (Sweden)

    Ali İrfan Güzel

    2014-12-01

    Full Text Available Polycystic ovary syndrome (PCOS is the most common reason of anovulatory infertility in reproductive age women. To make ovulation in these patients, from simple approach like life style changes to complicated therapies like assisted reproductive techniques are used. In this review, we aimed to emphasize different ovulation induction techniques that can be used in cases with PCOS. J Clin Exp Invest 2014; 5 (4: 626-631

  7. NDT of railway components using induction thermography

    Science.gov (United States)

    Netzelmann, U.; Walle, G.; Ehlen, A.; Lugin, S.; Finckbohner, M.; Bessert, S.

    2016-02-01

    Induction or eddy current thermography is used to detect surface cracks in ferritic steel. The technique is applied to detect surface cracks in rails from a moving test car. Cracks were detected at a train speed between 2 and 15 km/h. An automated demonstrator system for testing railway wheels after production is described. While the wheel is rotated, a robot guides the detection unit consisting of inductor and infrared camera over the surface.

  8. Inductance, electrically adjusted by semiconductor structure

    Directory of Open Access Journals (Sweden)

    Semenov А. А.

    2012-08-01

    Full Text Available A theoretical model of a passive flat inductor with electronic control is offered. Design charts of tank inductance and Q factor dependence on the forward bias voltage of n—i—p—i—n-structure, used as a specific core, the characteristics of which are regulated under the influence of an applied electric field, are presented. The comparison of design values with experimental features has shown their good correspondence with each other.

  9. Scalable conditional induction variables (CIV) analysis

    KAUST Repository

    Oancea, Cosmin E.

    2015-02-01

    Subscripts using induction variables that cannot be expressed as a formula in terms of the enclosing-loop indices appear in the low-level implementation of common programming abstractions such as Alter, or stack operations and pose significant challenges to automatic parallelization. Because the complexity of such induction variables is often due to their conditional evaluation across the iteration space of loops we name them Conditional Induction Variables (CIV). This paper presents a flow-sensitive technique that summarizes both such CIV-based and affine subscripts to program level, using the same representation. Our technique requires no modifications of our dependence tests, which is agnostic to the original shape of the subscripts, and is more powerful than previously reported dependence tests that rely on the pairwise disambiguation of read-write references. We have implemented the CIV analysis in our parallelizing compiler and evaluated its impact on five Fortran benchmarks. We have found that that there are many important loops using CIV subscripts and that our analysis can lead to their scalable parallelization. This in turn has led to the parallelization of the benchmark programs they appear in.

  10. Wireless Power Transmission Using Resonance Inductive Coupling

    Directory of Open Access Journals (Sweden)

    Prof. Vishal V. Pande,

    2014-04-01

    Full Text Available In this paper, we present the concept of transmitting power without using wires i.e.transmitting power as Magnetic waves from one place to another is in order to reduce the transmission and distribution losses. This concept is known as Resonance Inductive Coupling (RIC. We also discussed the technological developments in Wireless Power Transmission (WPT. The advantages, disadvantages, biological impacts and applications of WPT are also presented. Wireless power or wireless energy transmission is the transmission of electrical energy from a power source to an electrical load without man-made conductors. Wireless transmission is useful in cases where interconnecting wires are inconvenient, hazardous, or impossible. the proportion of energy received becomes critical only if it is too low for the signal to be distinguished from the background noise. With wireless power, efficiency is the more significant parameter. A large part of the energy sent out by the generating plant must arrive at the receiver or receivers to make the system economical.The most common form of wireless power transmission is carried out using direct induction followed by resonant magnetic induction. Other methods under consideration are electromagnetic radiation in the form of microwaves or lasers and electrical conduction through natural media

  11. EVALUATION OF INDUCTANCE WITH ELECTRICAL WIRES

    Directory of Open Access Journals (Sweden)

    V. Kudry

    2016-08-01

    Full Text Available In this paper proved the possibility of developing passive electronic inductive elements based replace metal wire that is wound inductor, the wire is made of electret. The relative permeability of the electret S  10 000, several orders of magnitude greater than the permeability of conventional insulation materials, i < 10, resulting current in the wire acquires properties bias current. The essence of innovation is to replace the source of of magnetic induction flow that pervades the core of the coil. According to the theory of electrodynamics, current bias, in contrast to conduction current, generated no movement of charge along the wire, but the change of the charge in the local volume.Equivalence bias current and conduction current is manifested in the possibility of forming a magnetic field. The flow through magnetic induction coil core regardless of the current it generates, creates voltage at its ends.The paper also shows the numeric characteristics that determine the effective frequency range, specified the reason why electric a wire with і < 10 can not generate magnetic flux through the core and serve as a passive reactive component.

  12. Implant positioning system using mutual inductance.

    Science.gov (United States)

    Zou, You; O'Driscoll, Stephen

    2012-01-01

    Surgical placement of implantable medical devices (IMDs) has limited precision and post-implantation the device can move over time. Accurate knowledge of the position of IMDs allows better interpretation of data gathered by the devices and may allow wireless power to be focused on the IMD thereby increasing power transfer efficiency. Existing positioning methods require device sizes and/or power consumptions which exceed the limits of in-vivo mm-sized IMDs applications. This paper describes a novel implant positioning system which replaces the external transmitting (TX) coil of a wireless power transfer link by an array of smaller coils, measures the mutual inductance between each coil in the TX array and the implanted receiving (RX) coil, and uses the spatial variation in those mutual inductances to estimate the location of the implanted device. This method does not increase the hardware or power consumption in the IMD. Mathematical analysis and electromagnetic simulations are presented which explain the theory underlying this scheme and show its feasibility. A particle swarm based algorithm is used to estimate the position of the RX coil from the measured mutual inductance values. MATLAB simulations show the positioning estimation accuracy on the order of 1 mm.

  13. Starting Time Calculation for Induction Motor.

    Directory of Open Access Journals (Sweden)

    Abhishek Garg

    2015-05-01

    Full Text Available This Paper Presents The Starting Time Calculation For A Squirrel Cage Induction Motor. The Importance Of Starting Time Lies In Determining The Duration Of Large Current, Which Flows During The Starting Of An Induction Motor. Normally, The Starting Current Of An Induction Motor Is Six To Eight Time Of Full Load Current. Plenty Of Methods Have Been Discovered To Start Motor In A Quick Time, But Due To Un-Economic Nature, Use Are Limited. Hence, For Large Motors Direct Online Starting Is Most Popular Amongst All Due To Its Economic And Feasible Nature. But Large Current With Dol Starting Results In A Heavy Potential Drop In The Power System. Thus, Special Care And Attention Is Required In Order To Design A Healthy System. A Very Simple Method To Calculate The Starting Time Of Motor Is Proposed In This Paper. Respective Simulation Study Has Been Carried Out Using Matlab 7.8.0 Environment, Which Demonstrates The Effectiveness Of The Starting Time Calculation.

  14. Magnetic induction measurements in distribution transformer cores

    Energy Technology Data Exchange (ETDEWEB)

    Paraskevopoulos, A.A.P.; Bourkas, P.D. [National Technical Univ. of Athens, Athens (Greece). Computer Engineering, High Voltage, and Electrical Measurements Laboratory; Paparigas, D. [Schneider ELVIM Electric Transformer Factory, Athens (Greece)

    2005-07-01

    Transformers need high magnetic field rates in order to operate efficiently. In this study, magnetic induction measurements of distribution transformer cores with power levels of 630 kVA were used to assess the performance of transformers in a city in Greece. A 630 kVA transformer was used to investigate whether magnetic induction measurements of the iron core arcs of the transformer were similar to the rest of the transformer's magnetic rate. Potential load losses were also investigated. Eight cores of 4 different sizes were measured in the study. Voltage transmissions were varied in order to measure the different cores. The voltage transmitted into the coil was calculated in order to compare the transformer's magnetic field with the cores. Average values for the measured cores were then calculated. Leakages were measured using a Gauss meter. Results of the study indicated that the measured values were lower than established safety limits for transformers. It was concluded that the magnetic induction measurements of transformer cores can be used to measure the overall performance of transformers. 18 refs., 8 tabs., 5 figs.

  15. Crack depth determination with inductive thermography

    Science.gov (United States)

    Oswald-Tranta, B.; Schmidt, R.

    2015-05-01

    Castings, forgings and other steel products are nowadays usually tested with magnetic particle inspection, in order to detect surface cracks. An alternative method is active thermography with inductive heating, which is quicker, it can be well automated and as in this paper presented, even the depth of a crack can be estimated. The induced eddy current, due to its very small penetration depth in ferro-magnetic materials, flows around a surface crack, heating this selectively. The surface temperature is recorded during and after the short inductive heating pulse with an infrared camera. Using Fourier transformation the whole IR image sequence is evaluated and the phase image is processed to detect surface cracks. The level and the local distribution of the phase around a crack correspond to its depth. Analytical calculations were used to model the signal distribution around cracks with different depth and a relationship has been derived between the depth of a crack and its phase value. Additionally, also the influence of the heating pulse duration has been investigated. Samples with artificial and with natural cracks have been tested. Results are presented comparing the calculated and measured phase values depending on the crack depth. Keywords: inductive heating, eddy current, infrared

  16. Field oriented control of induction motors

    Science.gov (United States)

    Burrows, Linda M.; Zinger, Don S.; Roth, Mary Ellen

    1990-01-01

    Induction motors have always been known for their simple rugged construction, but until lately were not suitable for variable speed or servo drives due to the inherent complexity of the controls. With the advent of field oriented control (FOC), however, the induction motor has become an attractive option for these types of drive systems. An FOC system which utilizes the pulse population modulation method to synthesize the motor drive frequencies is examined. This system allows for a variable voltage to frequency ratio and enables the user to have independent control of both the speed and torque of an induction motor. A second generation of the control boards were developed and tested with the next point of focus being the minimization of the size and complexity of these controls. Many options were considered with the best approach being the use of a digital signal processor (DSP) due to its inherent ability to quickly evaluate control algorithms. The present test results of the system and the status of the optimization process using a DSP are discussed.

  17. Using Induction to Refine Information Retrieval Strategies

    Science.gov (United States)

    Baudin, Catherine; Pell, Barney; Kedar, Smadar

    1994-01-01

    Conceptual information retrieval systems use structured document indices, domain knowledge and a set of heuristic retrieval strategies to match user queries with a set of indices describing the document's content. Such retrieval strategies increase the set of relevant documents retrieved (increase recall), but at the expense of returning additional irrelevant documents (decrease precision). Usually in conceptual information retrieval systems this tradeoff is managed by hand and with difficulty. This paper discusses ways of managing this tradeoff by the application of standard induction algorithms to refine the retrieval strategies in an engineering design domain. We gathered examples of query/retrieval pairs during the system's operation using feedback from a user on the retrieved information. We then fed these examples to the induction algorithm and generated decision trees that refine the existing set of retrieval strategies. We found that (1) induction improved the precision on a set of queries generated by another user, without a significant loss in recall, and (2) in an interactive mode, the decision trees pointed out flaws in the retrieval and indexing knowledge and suggested ways to refine the retrieval strategies.

  18. Induction heat treatment of laser welds

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove; Sørensen, Joakim Ilsing

    2003-01-01

    750º to 450º C. Initially, a simple analytical model was used to calculate the ideal energy contributions from a CO2 high power laser source together with an induction heat source such that the temperature can be kept at 600º C for 2.5 seconds. This knowledge was then used for the design......In this paper, a new approach based on induction heat-treatment of flat laser welded sheets is presented. With this new concept, the ductility of high strength steels GA260 with a thickness of 1.8 mm and CMn with a thickness of 2.13 mm is believed to be improved by prolonging the cooling time from...... of an induction coil. A number of systematic laboratory tests were then performed in order to study the effects of the coil on bead-on-plate laser welded samples. In these tests, important parameters such as coil current and distance between coil and sample were varied. Temperature measurements were made...

  19. Phytoalexin Induction in French Bean 1

    Science.gov (United States)

    Dixon, Richard A.; Dey, Prakash M.; Lawton, Michael A.; Lamb, Christopher J.

    1983-01-01

    Treatment of hypocotyl sections or cell suspension cultures of dwarf French bean (Phaseolus vulgaris L.) with an abiotic elicitor (denatured ribonuclease A) resulted in increased extractable activity of the enzyme l-phenylalanine ammonia-lyase. This induction could be transmitted from treated cells through a dialysis membrane to cells which were not in direct contact with the elicitor. In hypocotyl sections, induction of isoflavonoid phytoalexin accumulation was also transmitted across a dialysis membrane, although levels of insoluble, lignin-like phenolic material remained unchanged in elicitor-treated and control sections. In bean cell suspension cultures, the induction of phenylalanine ammonia-lyase in cells separated from ribonuclease-treated cells by a dialysis membrane was also accompanied by increases in the activities of chalcone synthase and chalcone isomerase, two enzymes previously implicated in the phytoalexin defense response. Such intercellular transmission of elicitation did not occur in experiments with cells treated with a biotic elicitor preparation heat-released from the cell walls of the bean pathogen Colletotrichum lindemuthianum. The results confirm and extend previous suggestions that a low molecular weight, diffusible factor of host plant origin is involved (in French bean) in the intercellular transmission of the elicitation response to abiotic elicitors. PMID:16662813

  20. Induction heat treatment of laser welds

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove; Sørensen, Joakim Ilsing

    2003-01-01

    In this paper, a new approach based on induction heat-treatment of flat laser welded sheets is presented. With this new concept, the ductility of high strength steels GA260 with a thickness of 1.8 mm and CMn with a thickness of 2.13 mm is believed to be improved by prolonging the cooling time from...... 750º to 450º C. Initially, a simple analytical model was used to calculate the ideal energy contributions from a CO2 high power laser source together with an induction heat source such that the temperature can be kept at 600º C for 2.5 seconds. This knowledge was then used for the design...... of an induction coil. A number of systematic laboratory tests were then performed in order to study the effects of the coil on bead-on-plate laser welded samples. In these tests, important parameters such as coil current and distance between coil and sample were varied. Temperature measurements were made...

  1. Effect of inductive coil shape on sensing performance of linear displacement sensor using thin inductive coil and pattern guide.

    Science.gov (United States)

    Misron, Norhisam; Ying, Loo Qian; Firdaus, Raja Nor; Abdullah, Norrimah; Mailah, Nashiren Farzilah; Wakiwaka, Hiroyuki

    2011-01-01

    This paper discusses the effect of inductive coil shape on the sensing performance of a linear displacement sensor. The linear displacement sensor consists of a thin type inductive coil with a thin pattern guide, thus being suitable for tiny space applications. The position can be detected by measuring the inductance of the inductive coil. At each position due to the change in inductive coil area facing the pattern guide the value of inductance is different. Therefore, the objective of this research is to study various inductive coil pattern shapes and to propose the pattern that can achieve good sensing performance. Various shapes of meander, triangular type meander, square and circle shape with different turn number of inductive coils are examined in this study. The inductance is measured with the sensor sensitivity and linearity as a performance evaluation parameter of the sensor. In conclusion, each inductive coil shape has its own advantages and disadvantages. For instance, the circle shape inductive coil produces high sensitivity with a low linearity response. Meanwhile, the square shape inductive coil has a medium sensitivity with higher linearity.

  2. Mathematical Model of an Inductive Measuring Cell for Contactless Conductometry

    CERN Document Server

    Semenov, Yury S

    2013-01-01

    A research of inductive conductometric cell is presented. An equivalent circuit and a mathematical model of inductive cell are given in the article. The model takes into account sample-coil capacity (i.e. capacity formed by the coil and the sample under study) and eddy currents. It is sample-coil capacity that makes inductive cell applicable for measurement of electrical conductivity of low conductive samples (specific conductance is less than 1S/m). The model can be used to calculate impedance of inductive cell for different characteristics of sample, materials and dimensions of cell without numerical solving of partial differential equations. Results of numerical simulation were verified by experiment for several devices with inductive cell. Some features that an engineer has to hold in mind while designing a conductometer based on inductive cell are discussed. Presented model can be useful for those who study inductively coupled plasma.

  3. Induction Heating Process Design Using COMSOL Multiphysics Software

    Directory of Open Access Journals (Sweden)

    Andy Triwinarko

    2011-08-01

    Full Text Available Induction heating is clean environmental heating process due to a non-contact heating process. There is lots of the induction heating type that be used in the home appliance but it is still new technology in Indonesia. The main interesting area of the induction heating design is the efficiency of the usage of energy and choice of the plate material. COMSOL Multiphysics Software can be used to simulate and estimate the induction heating process. Therefore, the software can be used to design the induction heating process that will have a optimum efficiency. The properties of the induction heating design were also simulated and analyzed such as effect of inductors width, inductors distance, and conductive plate material. The result was shown that the good design of induction heating must have a short width and distance inductor and used silicon carbide as material plate with high frequency controller.

  4. CFOA-Based Lossless and Lossy Inductance Simulators

    Directory of Open Access Journals (Sweden)

    F. Kaçar

    2011-09-01

    Full Text Available Inductance simulator is a useful component in the circuit synthesis theory especially for analog signal processing applications such as filter, chaotic oscillator design, analog phase shifters and cancellation of parasitic element. In this study, new four inductance simulator topologies employing a single current feedback operational amplifier are presented. The presented topologies require few passive components. The first topology is intended for negative inductance simulation, the second topology is for lossy series inductance, the third one is for lossy parallel inductance and the fourth topology is for negative parallel (-R (-L (-C simulation. The performance of the proposed CFOA based inductance simulators is demonstrated on both a second-order low-pass filter and inductance cancellation circuit. PSPICE simulations are given to verify the theoretical analysis.

  5. Induction in industrial processes; L`induction dans les procedes industriels

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1997-09-01

    This short paper is a brief report about the 1997 international congress on the use of induction in industrial processes: fusion, forging, thixo-forming, metal treatments and continuous casting, heating and thermal treatments, inductive plasma, fusion in cold crucibles, surface treatments, galvanizing, power sources, electromagnetic compatibility, chemistry, agriculture and food industry. The development of new technologies and in particular of power supplies with power transistors, allows to produce electric currents with any frequency and with powers up to several MW. The efficiency of these systems is increased to more than 95% and generates important energy and cost savings. More compact induction systems with a better energy efficiency are now proposed thanks to progresses made in the modeling of the physical and mechanical phenomena occurring in the materials. (J.S.)

  6. Vector Controlled Two Phase Induction Motor and To A Three Phase Induction Motor

    Directory of Open Access Journals (Sweden)

    K.krishna Rao (PG student

    2014-12-01

    Full Text Available This paper presents vector controlled of single phase induction motor. some problems are with vector controlled SPIM.As SPIM’s are typically to maintain speed and also about the complex implementation of vector controlled SPIM.the implemantion of the proposed vector controlled TPIM compared to the vector controlled SPIM. The general modal sutable for vector control of the unsymmentrical two phase induction motor and also stator flux oriented controlled strategies are analized. the comparative performance of both has been presented in this work with help of a practical three phase motor.

  7. Oral misoprostol for induction of labour.

    Science.gov (United States)

    Alfirevic, Zarko; Aflaifel, Nasreen; Weeks, Andrew

    2014-06-13

    Misoprostol is an orally active prostaglandin. In most countries misoprostol is not licensed for labour induction, but its use is common because it is cheap and heat stable. To assess the use of oral misoprostol for labour induction in women with a viable fetus. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (17 January 2014). Randomised trials comparing oral misoprostol versus placebo or other methods, given to women with a viable fetus for labour induction. Two review authors independently assessed trial data, using centrally-designed data sheets. Overall there were 76 trials (14,412) women) which were of mixed quality.In nine trials comparing oral misoprostol with placebo (1109 women), women using oral misoprostol were more likely to give birth vaginally within 24 hours (risk ratio (RR) 0.16, 95% confidence interval (CI) 0.05 to 0.49; one trial; 96 women), need less oxytocin (RR 0.42, 95% CI 0.37 to 0.49; seven trials; 933 women) and have a lower caesarean section rate (RR 0.72, 95% CI 0.54 to 0.95; eight trials; 1029 women).In 12 trials comparing oral misoprostol with vaginal dinoprostone (3859 women), women given oral misoprostol were less likely to need a caesarean section (RR 0.88, 95% CI 0.78 to 0.99; 11 trials; 3592 women). There was some evidence that they had slower inductions, but there were no other statistically significant differences.Nine trials (1282 women) compared oral misoprostol with intravenous oxytocin. The caesarean section rate was significantly lower in women who received oral misoprostol (RR 0.77, 95% CI 0.60 to 0.98; nine trials; 1282 women), but they had increased rates of meconium-stained liquor (RR 1.65, 95% CI 1.04 to 2.60; seven trials; 1172 women).Thirty-seven trials (6417 women) compared oral and vaginal misoprostol and found no statistically significant difference in the primary outcomes of serious neonatal morbidity/death or serious maternal morbidity or death. The results for vaginal birth not

  8. Intracervical prostaglandins for induction of labour.

    Science.gov (United States)

    Boulvain, M; Kelly, A; Irion, O

    2008-01-23

    Prostaglandins have been used for cervical ripening and induction of labour since the 1970s. The goal of the administration of prostaglandins in the process of induction of labour is to achieve cervical ripening before the onset of contractions. One of the routes of administration that was proposed is intracervical. Using this route, prostaglandins are less easy to administer and the need for exposing the cervix may cause discomfort to the woman. To determine the effects of intracervical prostaglandins for third trimester cervical ripening or induction of labour compared with placebo/no treatment and with vaginal prostaglandins (except misoprostol). We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (August 2007) and bibliographies of relevant papers. Clinical trials comparing intracervical prostaglandins used for third trimester cervical ripening or labour induction with placebo/no treatment or other methods listed above it on a predefined list of labour induction methods (vaginal prostaglandins, except misoprostol). A strategy was developed to deal with the large volume and complexity of trial data relating to labour induction. This involved a two-stage method of data extraction. Fifty-six trials (7738 women) are included. INTRACERVICAL PGE2 WITH PLACEBO/NO TREATMENT: 28 TRIALS, 3764 WOMEN: Four studies reported the number of women who did not achieve vaginal delivery within 24 hours, showing a decreased risk with PGE2 (relative risk (RR) 0.61; 95% confidence interval (CI) 0.47 to 0.79). There was a small, and statistically non-significant, reduction of the risk of caesarean section when PGE2 was used (RR 0.88; 95% CI 0.77 to 1.00). The finding was statistically significant in a subgroup of women with intact membranes and unfavourable cervix only (RR 0.82; 95% CI 0.68 to 0.98). The risk of hyperstimulation with fetal heart rate (FHR) changes was not significantly increased (RR 1.21; 95% CI 0.72 to 2.05). However, the risk of

  9. Induction of fetal demise before abortion.

    Science.gov (United States)

    Diedrich, Justin; Drey, Eleanor

    2010-06-01

    For decades, the induction of fetal demise has been used before both surgical and medical second-trimester abortion. Intracardiac potassium chloride and intrafetal or intra-amniotic digoxin injections are the pharmacologic agents used most often to induce fetal demise. In the last several years, induction of fetal demise has become more common before second-trimester abortion. The only randomized, placebo-controlled trial of induced fetal demise before surgical abortion used a 1 mg injection of intra-amniotic digoxin before surgical abortion at 20-23 weeks' gestation and found no difference in procedure duration, difficulty, estimated blood loss, pain scores or complications between groups. Inducing demise before induction terminations at near viable gestational ages to avoid signs of life at delivery is practiced widely. The role of inducing demise before dilation and evacuation (D&E) remains unclear, except for legal considerations in the United States when an intact delivery is intended. There is a discrepancy between the one published randomized trial that used 1 mg intra-amniotic digoxin that showed no improvement in D&E outcomes and observational studies using different routes, doses and pre-abortion intervals that have made claims for its use. Additional randomized trials might provide clearer evidence upon which to make further recommendations about any role of inducing demise before surgical abortion. At the current time, the Society of Family Planning recommends that pharmacokinetic studies followed by randomized controlled trials be conducted to assess the safety and efficacy of feticidal agents to improve abortion safety.

  10. Backstepping Strategy for Induction Motor Control

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    2000-01-01

    Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping with a s...... with a simple flux observer is used in the design. Assuming known motor parameters the design achieves stability with guaranteed region of attraction. It is also shown how a conventional field oriented controller may be obtained by omitting parts of the nonlinear controller....

  11. Numerical analysis method for linear induction machines.

    Science.gov (United States)

    Elliott, D. G.

    1972-01-01

    A numerical analysis method has been developed for linear induction machines such as liquid metal MHD pumps and generators and linear motors. Arbitrary phase currents or voltages can be specified and the moving conductor can have arbitrary velocity and conductivity variations from point to point. The moving conductor is divided into a mesh and coefficients are calculated for the voltage induced at each mesh point by unit current at every other mesh point. Combining the coefficients with the mesh resistances yields a set of simultaneous equations which are solved for the unknown currents.

  12. Sensorless soft starters for loaded induction motors

    Energy Technology Data Exchange (ETDEWEB)

    Chrisanov, V.I.; Konovalov, Y.N. [Power Plearonics Department, State University of Telecommunication, St. Petersburg (Russian Federation)

    1997-12-31

    The paper is devoted to the research and design of sensorless thyristor soft starters for loaded induction motors (IM) with short circuited squirrel case rotors. It is shown that the applied direct converter topology depends on the output power and consists of a small number of thyristors with special algorithm of switching to realize voltage - frequency control of IM drive systems at low speeds of starting. Sensorless control is realized from the both sides when neither direct converter nor drive system consists of any additional transducers for soft starting operation. (orig.) 4 refs.

  13. Two-phase induction motor drives

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Lungeanu, Florin; Skaug, Kenneth

    2004-01-01

    There is a continuous debate today concerning the ?motor of the future? for low-power applications requiring less than 1-2 kW. The specialists are focusing on superior motors [1] like brushless-dc, permanent-magnet synchronous, or electronically commutated types, because they show improvements...... in efficiency, reliability, torque-per-volume/mass ratio, maintenance, and service life. Despite this effort, the industry seems to be responding with manifest rigidity in changing standard induction motor solutions when considering the installed volume into the field, the investment in manufacturing base...

  14. Orbital effects due to gravitational induction

    CERN Document Server

    Bini, Donato; Giordano, Domenico

    2015-01-01

    We study the motion of test particles in the metric of a localized and slowly rotating astronomical source, within the framework of linear gravitoelectromagnetism, grounded on a Post-Minkowskian approximation of general relativity. Special attention is paid to gravitational inductive effects due to time-varying gravitomagnetic fields. We show that, within the limits of the approximation mentioned above, there are cumulative effects on the orbit of the particles either for planetary sources or for binary systems. They turn out to be negligible.

  15. A History of Probabilistic Inductive Logic Programming

    Directory of Open Access Journals (Sweden)

    Fabrizio eRiguzzi

    2014-09-01

    Full Text Available The field of Probabilistic Logic Programming (PLP has seen significant advances in the last 20 years, with many proposals for languages that combine probability with logic programming. Since the start, the problem of learning probabilistic logic programs has been the focus of much attention. Learning these programs represents a whole subfield of Inductive Logic Programming (ILP. In Probabilistic ILP (PILP two problems are considered: learning the parameters of a program given the structure (the rules and learning both the structure and the parameters. Usually structure learning systems use parameter learning as a subroutine. In this article we present an overview of PILP and discuss the main results.

  16. Finite element modelingof spherical induction actuator

    OpenAIRE

    Galary, Grzegorz

    2005-01-01

    The thesis deals with finite element method simulations of the two-degree of freedom spherical induction actuator performed using the 2D and 3D models. In some cases non-linear magnetization curves, rotor movement and existence of higher harmonics are taken into account. The evolution of the model leading to its simplification is presented. Several rotor structures are tested, namely the one-layer, two-layers and two-layers-with-teeth rotor. The study of some rotor parameters, i.e. t...

  17. Backstepping Strategy for Induction Motor Control

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    2000-01-01

    Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping...... with a simple flux observer is used in the design. Assuming known motor parameters the design achieves stability with guaranteed region of attraction. It is also shown how a conventional field oriented controller may be obtained by omitting parts of the nonlinear controller....

  18. Current evidence supporting "letrozole" for ovulation induction

    Directory of Open Access Journals (Sweden)

    Sujata Kar

    2013-01-01

    Full Text Available Aromatase inhibitor "letrozole" was first introduced as a potential ovulation induction (OI drug almost a decade back. Large number of studies has been published using letrozole for OI: In polycystic ovary syndrome (PCOS women, clomiphene citrate (CC resistant women, for intrauterine insemination and also in various protocols of mild stimulation for in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI. Letrozole appears to be a good option, with its oral route of administration, cost, shorter half-life and negligible side effects. However, the verdict on efficacy and safety of letrozole is still uncertain. This review explores the current scientific data supporting letrozole for OI.

  19. Induction generator models in dynamic simulation tools

    DEFF Research Database (Denmark)

    Knudsen, Hans; Akhmatov, Vladislav

    1999-01-01

    . It is found to be possible to include a transient model in dynamic stability tools and, then, obtain correct results also in dynamic tools. The representation of the rotating system influences on the voltage recovery shape which is an important observation in case of windmills, where a heavy mill is connected......For AC network with large amount of induction generators (windmills) the paper demonstrates a significant discrepancy in the simulated voltage recovery after fault in weak networks when comparing dynamic and transient stability descriptions and the reasons of discrepancies are explained...

  20. Technology development for high power induction accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Birx, D.L.; Reginato, L.L.

    1985-06-11

    The marriage of Induction Linac technology with Nonlinear Magnetic Modulators has produced some unique capabilities. It appears possible to produce electron beams with average currents measured in amperes, at gradients exceeding 1 MeV/meter, and with power efficiencies approaching 50%. A 2 MeV, 5 kA electron accelerator has been constructed at the Lawrence Livermore National Laboratory (LLNL) to demonstrate these concepts and to provide a test facility for high brightness sources. The pulse drive for the accelerator is based on state-of-the-art magnetic pulse compressors with very high peak power capability, repetition rates exceeding a kilohertz and excellent reliability.

  1. Linear induction accelerator for heavy ions

    Energy Technology Data Exchange (ETDEWEB)

    Keefe, D.

    1976-09-01

    There is considerable recent interest in the use of high energy (..gamma.. = 1.1), heavy (A greater than or equal to 100) ions to irradiate deuterium--tritium pellets in a reactor vessel to constitute a power source at the level of 1 GW or more. Various accelerator configurations involving storage rings have been suggested. A discussion is given of how the technology of Linear Induction Accelerators--well known to be matched to high current and short pulse length--may offer significant advantages for this application.

  2. Order-Sorted Parameterization and Induction

    Science.gov (United States)

    Meseguer, José

    Parameterization is one of the most powerful features to make specifications and declarative programs modular and reusable, and our best hope for scaling up formal verification efforts. This paper studies order-sorted parameterization at three different levels: (i) its mathematical semantics; (ii) its operational semantics by term rewriting; and (iii) the inductive reasoning principles that can soundly be used to prove properties about such specifications. It shows that achieving the desired properties at each of these three levels is a considerably subtler matter than for many-sorted specifications, but that such properties can be attained under reasonable conditions.

  3. Inductive Output Tubes -- Status and Future Direction

    Science.gov (United States)

    Bohlen, Heinz

    2002-08-01

    Invented in 1938, at the same time as the klystron, it took the Inductive Output Tube (IOT) more than 40 years to surface as a useful device. Its progress after that event was rapid. Though plagued by teething problems in the beginning, it has since replaced the klystron as a TV amplifier in UHF, and it holds its own against the solid-state competition in that application. The IOT also shows much promise as a high-power amplifier, but early developments in this direction have remained solitary events so far. The paper discusses the causes and the potential of the device for future high-power applications.

  4. A Microfabricated Inductively Coupled Plasma Excitation Source

    Institute of Scientific and Technical Information of China (English)

    WANG Yong-Qing; PU Yong-Ni; SUN Rong-Xia; TANG Yu-Jun; CHEN Wen-Jun; LOU Jian-Zhong; MA Wen

    2008-01-01

    A novel miniaturization of inductively coupled plasma(ICP)source based on printed circuit produced using micro-fabrication techniques is presented.The basic parameters of the novel ICP,including its radio frequency,power loss,size,and argon consumption are less than 1% of that for the case of atmospheric pressure ICP source.For example,at 100 Pa of argon gas pressure,the present ICP source can be ignited by using the rf power less than 3.5 W.Potential applications of the ICP is discussed.

  5. Inductive Data Types Based on Fibrations Theory in Programming

    Directory of Open Access Journals (Sweden)

    Decheng Miao

    2016-03-01

    Full Text Available Traditional methods including algebra and category theory have some deficiencies in analyzing semantics properties and describing inductive rules of inductive data types, we present a method based on Fibrations theory aiming at those questions above. We systematically analyze some basic logical structures of inductive data types about a fibration such as re-indexing functor, truth functor and comprehension functor, make semantics models of non-indexed fibration, single-sorted indexed fibration and many-sorted indexed fibration respectively. On this basis, we thoroughly discuss semantics properties of fibred, single-sorted indexed and many-sorted indexed inductive data types, and abstractly describe their inductive rules with universality. Furthermore, we briefly introduce applications of the three inductive dana types for analyzing semantics properties and describing inductive rules based on Fibrations theory via some examples. Compared with traditional methods, our works have the following three advantages. Firstly, brief descriptions and flexible expansibility of Fibrations theory can analyze semantics properties of inductive data types accurately, whose semantics are computed automatically. Secondly, superior abstractness of Fibrations theory does not rely on particular computing environments to depict inductive rules of inductive data types with universality. Thirdly, its rigorousness and consistence provide sound basis for testing and maintenance of software development.

  6. Phase-sensitive detection of both inductive and non-inductive ac voltages in ferromagnetic resonance

    Science.gov (United States)

    Weiler, Mathias; Shaw, Justin M.; Nembach, Hans T.; Schoen, Martin A.; Boone, Carl T.; Silva, Thomas J.

    2014-03-01

    Spin pumping causes significant damping in ultrathin ferromagnetic/normal metal (NM) multilayers via spin-current generation of both dc and ac character in the NM system. While the nonlinear dc component has been investigated in detail by utilization of the inverse spin Hall effect (iSHE) in NMs, much less is known about the linear ac component that is presumably much larger in the small-excitation limit. We measured generated ac voltages in a wide variety of Permalloy/NM multilayers via vector-network-analyzer ferromagnetic resonance. We employ a custom, impedance-matched, broadband microwave coupler that features a ferromagnetic thin film reference resonator to accurately compare ac voltage amplitudes and phases between varieties of multilayers. By use of the fact that inductive and ac iSHE signals are phase-shifted by π/2, we find that inductive signals are major contributors in all investigated samples. It is only by comparison of the phase and amplitude of the recorded ac voltages between multiple samples that we can extract the non-inductive contributions due to spin-currents. Voltages due to the ac iSHE in Permalloy(10nm)/platinum(5nm) bilayers are weaker than inductive signals, in agreement with calculations based upon recent theoretical predictions. M.W. acknowledges financial support by the German Academic Exchange service (DAAD).

  7. Modelling of Parasitic Inductances of a High Precision Inductive Adder for CLIC

    CERN Document Server

    Holma, J; Ovaska, S J

    2013-01-01

    The CLIC study is exploring the scheme for an electron-positron collider with high luminosity and a nominal centre-of-mass energy of 3 TeV. The CLIC pre-damping rings and damping rings will produce, through synchrotron radiation, ultra-low emittance beam with high bunch charge. To avoid beam emittance increase, the damping ring kicker systems must provide extremely flat, high-voltage, pulses. The specifications for the extraction kickers of the DRs are particularly demanding: the flat-top of the pulses must be ±12.5 kV with a combined ripple and droop of not more than ±0.02 % (±2.5 V). An inductive adder is a very promising approach to meeting the specifications. However, the output impedance of the inductive adder needs to be well matched to the system impedance. The primary leakage inductance, which cannot be computed accurately analytically, has a significant effect upon the output impedance of the inductive adder. This paper presents predictions, obtained by modelling the 3D geometry of the adder struc...

  8. Addiction, adolescence, and innate immune gene induction

    Directory of Open Access Journals (Sweden)

    Fulton T Crews

    2011-04-01

    Full Text Available Repeated drug use/abuse amplifies psychopathology, progressively reducing frontal lobe behavioral control and cognitive flexibility while simultaneously increasing limbic temporal lobe negative emotionality. The period of adolescence is a neurodevelopmental stage characterized by poor behavioral control as well as strong limbic reward and thrill seeking. Repeated drug abuse and/or stress during this stage increase the risk of addiction and elevate activator innate immune signaling in the brain. Nuclear factor-kappa-light-chain-enhancer of activated B cells (NF-κB is a key glial transcription factor that regulates proinflammatory chemokines, cytokines, oxidases, proteases, and other innate immune genes. Induction of innate brain immune gene expression (e.g., NF-κB facilitates negative affect, depression-like behaviors, and inhibits hippocampal neurogenesis. In addition, innate immune gene induction alters cortical neurotransmission consistent with loss of behavioral control. Studies with anti-oxidant, anti-inflammatory, and anti-depressant drugs as well as opiate antagonists link persistent innate immune gene expression to key behavioral components of addiction, e.g. negative affect-anxiety and loss of frontal cortical behavioral control. This review suggests that persistent and progressive changes in innate immune gene expression contribute to the development of addiction. Innate immune genes may represent a novel new target for addiction therapy.

  9. Constrained length minimum inductance gradient coil design.

    Science.gov (United States)

    Chronik, B A; Rutt, B K

    1998-02-01

    A gradient coil design algorithm capable of controlling the position of the homogeneous region of interest (ROI) with respect to the current-carrying wires is required for many advanced imaging and spectroscopy applications. A modified minimum inductance target field method that allows the placement of a set of constraints on the final current density is presented. This constrained current minimum inductance method is derived in the context of previous target field methods. Complete details are shown and all equations required for implementation of the algorithm are given. The method has been implemented on computer and applied to the design of both a 1:1 aspect ratio (length:diameter) central ROI and a 2:1 aspect ratio edge ROI gradient coil. The 1:1 design demonstrates that a general analytic method can be used to easily obtain very short gradient coil designs for use with specialized magnet systems. The edge gradient design demonstrates that designs that allow imaging of the neck region with a head sized gradient coil can be obtained, as well as other applications requiring edge-of-cylinder regions of uniformity.

  10. Radical induction theory of ulcerative colitis

    Institute of Scientific and Technical Information of China (English)

    Jay Pravda

    2005-01-01

    To propose a new pathogenesis called Radical Induction to explain the genesis and progression of ulcerative colitis (UC). UC is an inflammatory bowel disease. Colonic inflammation in UC is mediated by a buildup of white blood cells (WBCs) within the colonic mucosal lining; however,to date there is no answer for why WBCs initially enter the colonic mucosa to begin with. A new pathogenesis termed "Radical Induction Theory" is proposed to explain this and states that excess un-neutralized hydrogen peroxide, produced within colonic epithelial cells as a result of aberrant cellular metabolism, diffuses through cell membranes to the extracellular space where it is converted to the highly damaging hydroxyl radical resulting in oxidative damage to structures comprising the colonic epithelial barrier. Once damaged, the barrier is unable to exclude highly immunogenic fecal bacterial antigens from invading the normally sterile submucosa. This antigenic exposure provokes an initial immune response of WBC infiltration into the colonic mucosa. Once present in the mucosa,WBCs are stimulated to secrete toxins by direct exposure to fecal bacteria leading to mucosal ulceration and bloody diarrhea characteristic of this disease.

  11. Time to Reconsider Stem Cell Induction Strategies

    Directory of Open Access Journals (Sweden)

    Hans-Werner Denker

    2012-12-01

    Full Text Available Recent developments in stem cell research suggest that it may be time to reconsider the current focus of stem cell induction strategies. During the previous five years, approximately, the induction of pluripotency in somatic cells, i.e., the generation of so-called ‘induced pluripotent stem cells’ (iPSCs, has become the focus of ongoing research in many stem cell laboratories, because this technology promises to overcome limitations (both technical and ethical seen in the production and use of embryonic stem cells (ESCs. A rapidly increasing number of publications suggest, however, that it is now possible to choose instead other, alternative ways of generating stem and progenitor cells bypassing pluripotency. These new strategies may offer important advantages with respect to ethics, as well as to safety considerations. The present communication discusses why these strategies may provide possibilities for an escape from the dilemma presented by pluripotent stem cells (self-organization potential, cloning by tetraploid complementation, patenting problems and tumor formation risk.

  12. Medical therapeutics: from induction to scientific evolution.

    Science.gov (United States)

    Nunes, José Pedro Lopes

    2013-01-01

    The field of medical therapeutics may be characterized as having suffered major scientific evolution in the last decades. The publication of landmark studies has been important enough to produce shifts in patient care. However, the scientific evolution in this field does not necessarily imply a progressively greater degree of certitude. In fact, it is not uncommon for new knowledge, when reflected in clinical practice, to weaken previous knowledge. In medical therapeutics, strict inductive reasoning implies the existence of empirical intervention data, typically clinical trial data. In many instances, however, such data does not exist-leaving room for a mixture of inductive and "pseudo-deductive" reasoning. It is often necessary to establish treatment on the basis of incomplete and inconclusive information, more so when the clinical situation is grave, but when no valid information exists, no treatment may be an option. In many instances, the rule "I wish not to impose on others" has superseded the concept "Do not impose on others what you yourself do not desire."

  13. Automatic Induction of Rule Based Text Categorization

    Directory of Open Access Journals (Sweden)

    D.Maghesh Kumar

    2010-12-01

    Full Text Available The automated categorization of texts into predefined categories has witnessed a booming interest in the last 10 years, due to the increased availability of documents in digital form and the ensuingneed to organize them. In the research community the dominant approach to this problem is based on machine learning techniques: a general inductive process automatically builds a classifier by learning, from a set of preclassified documents, the characteristics of the categories. This paper describes, a novel method for the automatic induction of rule-based text classifiers. This method supports a hypothesis language of the form "if T1, … or Tn occurs in document d, and none of T1+n,... Tn+m occurs in d, then classify d under category c," where each Ti is a conjunction of terms. This survey discusses the main approaches to text categorization that fall within the machine learning paradigm. Issues pertaining tothree different problems, namely, document representation, classifier construction, and classifier evaluation were discussed in detail.

  14. On electromagnetic induction in electric conductors

    CERN Document Server

    Korolev, Alexander I

    2013-01-01

    Experimental validation of the Faraday's law of electromagnetic induction (EMI) is performed when an electromotive force is generated in thin copper turns, located inside a large magnetic coil. It has been established that the electromotive force (emf) value should be dependent not only on changes of the magnetic induction flux through a turn and on symmetry of its crossing by magnetic power lines also. The law of EMI is applicable in sufficient approximation in case of the changes of the magnetic field near the turn are symmetrical. Experimental study of the induced emf in arcs and a direct section of the conductor placed into the variable field has been carried out. Linear dependence of the induced emf on the length of the arc has been ascertained in case of the magnetic field distribution symmetry about it. Influence of the magnetic field symmetry on the induced emf in the arc has been observed. The curve of the induced emf in the direct section over period of current pulse is similar to this one for the t...

  15. Inductive Logic Programming for Industrial Control Applications

    Directory of Open Access Journals (Sweden)

    Samiya Bouarroudj

    2014-04-01

    Full Text Available Advanced Monitoring Systems of the processes consti tute a higher level to the systems of control and use specific techniques and methods. An importa nt part of the task of supervision focuses on the detection and the diagnosis of various situatio ns of faults which can affect the process. Methods of fault detection and diagnosis (FDD are different from the type of knowledge about the process that they require. They can be classifi ed as data-driven, analytical, or knowledge- based approach. A collaborative FDD approach that c ombines the strengths of various heterogeneous FDD methods is able to maximize diagn ostic performance. The new generation of knowledge-based systems or decision support syst ems needs to tap into knowledge that is both very broad, but specific to a domain, combinin g learning, structured representations of domain knowledge such as ontologies and reasoning t ools. In this paper, we present a decision- aid tool in case of malfunction of high power indus trial steam boiler. For this purpose an ontology was developed and considered as a prior co nceptual knowledge in Inductive Logic Programming (ILP for inducing diagnosis rules. The next step of the process concerns the inclusion of rules acquired by induction in the kno wledge base as well as their exploitation for reasoning.

  16. nanoSQUID operation using kinetic rather than magnetic induction.

    Science.gov (United States)

    McCaughan, Adam N; Zhao, Qingyuan; Berggren, Karl K

    2016-06-14

    We report on a method of nanoSQUID modulation which uses kinetic inductance rather than magnetic inductance to manip-ulate the internal fluxoid state. We produced modulation using injected current rather than an applied magnetic field. Using this injected current, we were able to observe the triangle-wave shaped modulation of the device critical current which was periodic according to the London fluxoid quantization condition. The measurement results also confirmed that the fluxoid state inside a superconducting loop can be manipulated using primarily kinetic inductance. By using primarily kinetic inductance rather than magnetic inductance, the size of the coupling inductor was reduced by a factor of 10. As a result, this approach may provide a means to reduce the size of SQUID-based superconducting electronics. Additionally, this method provides a convenient way to perform kinetic inductance characterizations of superconducting thin films.

  17. Linearizing Control of Induction Motor Based on Networked Control Systems

    Institute of Scientific and Technical Information of China (English)

    Jun Ren; Chun-Wen Li; De-Zong Zhao

    2009-01-01

    A new approach to speed control of induction motors is developed by introducing networked control systems (NCSs) into the induction motor driving system. The control strategy is to stabilize and track the rotor speed of the induction motor when the network time delay occurs in the transport medium of network data. First, a feedback linearization method is used to achieve input-output linearization and decoupling control of the induction motor driving system based on rotor flux model, and then the characteristic of network data is analyzed in terms of the inherent network time delay. A networked control model of an induction motor is established. The sufficient condition of asymptotic stability for the networked induction motor driving system is given, and the state feedback controller is obtained by solving the linear matrix inequalities (LMIs). Simulation results verify the efficiency of the proposed scheme.

  18. Predictive Condition Monitoring of Induction Motor Bearing Using Fuzzy Logic

    OpenAIRE

    2012-01-01

    Induction motor is critical component in industrial processes and is frequently integrated in commercially available equipment. Safety, reliability, efficiency and performance are the major concerns of induction motor applications. Due to high reliability requirements and cost of breakdown, condition monitoring, diagnosis and Protection increasing importance. Protection of an induction motor (IM) against possible problems, such as stator faults, rotor faults and mechanical faults, occurring i...

  19. A Reasoning System using Inductive Inference of Analogical Union

    OpenAIRE

    Miyahara, Tetsuhiro

    1988-01-01

    Analogical reasoning derives a new fact based on the analogous facts previously known. Inductive inference is a process of gaining a general rule from examples. We propose a new reasoning system using inductive inference and analogical reasoning. which is applicable to intellectual information processing and we characterize its power. Given an enumeration of paired examples. this system inductively infers a program representing the paring and constructs an analogical union. It reasons by anal...

  20. Haemodynamic changes after induction of anaesthesia with sevoflurane vs. propofol

    OpenAIRE

    POTOČNIK, IZTOK; NOVAK JANKOVIĆ, VESNA; Štupnik, Tomaž; Kremžar, Boriana

    2011-01-01

    Inhalation induction with sevoflurane would appear to offer several objective advantages compared to induction with propofol. In our study, the hemodynamic results of sevoflurane vs. propofol induction in patients undergoing thoracotomy were studied. In a prospective, randomized, blinded study 24 patients were randomly allocated to one of 2 groups: sevoflurane (S) and propofol (P) (n=12 each). For hemodynamic monitoring the LIDCO plus system was used. Patients in group S were induced into ana...

  1. Bifurcation and control of chaos in Induction motor drives

    OpenAIRE

    Chakrabarty, Krishnendu; Kar, Urmila

    2014-01-01

    The induction motor controlled by Indirect Field Oriented Control (IFOC) is known to have high performance and better stability. This paper reports the dynamical behavior of an indirect field oriented control (IFOC) induction motor drive in the light of bifurcation theory. The speed of high performance induction motor drive is controlled by IFOC method. The knowledge of qualitative change of the behavior of the motor such as equilibrium points, limit cycles and chaos with the change of motor ...

  2. CALCULATION OF INDUCTANCE OF THE INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR

    Directory of Open Access Journals (Sweden)

    Phyong Le Ngo

    2017-01-01

    Full Text Available Interior permanent magnet synchronous motor (IPMSM refers to salient-pole synchronous motors, characterized by inequality of inductances of longitudinal (d and transverse (q axes. Electromagnetic torque of IPMSM consists of two components: active torque and reactive torque; the latter depends on inductances of d and q axes. An analytical method to calculate own inductances and mutual inductances of a three-phase IPMSM is presented. Distributed windings of the stator are substituted by equivalent sine distributed windings. An interior permanent magnets rotor is substituted by an equivalent salient-pole rotor. Sections of a magnetic circuit comprising interior permanent magnets, air barriers and steel bridges are substituted by equivalent air-gap. The expressions of the magnetic induction created by current of the stator windings at each point of the air gap as well as of magnetic flux linkage of the stator windings have been obtained. The equations of the self-inductances of phases A, B, C, and of inductance of mutual induction are determined from magnetic flux linkage. The inductance of the d and q axes have been obtained as a result of transformation of the axes abc–dq. The results obtained with the use of the proposed analytical method and the finite element method are presented in the form of a graph; the calculations that have been obtained by these two methods were compared. 

  3. Modeling of Lossy Inductance in Moving-Coil Loudspeakers

    DEFF Research Database (Denmark)

    Kong, Xiao-Peng; Agerkvist, Finn T.; Zeng, Xin-Wu

    2015-01-01

    The electrical impedance of moving-coil loudspeakers is dominated by the lossy inductance in high frequency range. Using the equivalent electrical circuit method, a new model for the lossy inductance based on separate functions for the magnitude and phase of the impedance is presented. The electr......The electrical impedance of moving-coil loudspeakers is dominated by the lossy inductance in high frequency range. Using the equivalent electrical circuit method, a new model for the lossy inductance based on separate functions for the magnitude and phase of the impedance is presented...

  4. Dynamic Model of Linear Induction Motor Considering the End Effects

    Directory of Open Access Journals (Sweden)

    H. A. Hairik

    2009-01-01

    Full Text Available In this paper the dynamic behavior of linear induction motor is described by a mathematical model taking into account the end effects and the core losses. The need for such a model rises due to the complexity of linear induction motors electromagnetic field theory. The end affects by introducing speed dependent scale factor to the magnetizing inductance and series resistance in the d-axis equivalent circuit. Simulation results are presented to show the validity of the model during both no-load and sudden load change intervals. This model can also be used directly in simulation researches for linear induction motor vector control drive systems.

  5. Automatic design of decision-tree induction algorithms

    CERN Document Server

    Barros, Rodrigo C; Freitas, Alex A

    2015-01-01

    Presents a detailed study of the major design components that constitute a top-down decision-tree induction algorithm, including aspects such as split criteria, stopping criteria, pruning, and the approaches for dealing with missing values. Whereas the strategy still employed nowadays is to use a 'generic' decision-tree induction algorithm regardless of the data, the authors argue on the benefits that a bias-fitting strategy could bring to decision-tree induction, in which the ultimate goal is the automatic generation of a decision-tree induction algorithm tailored to the application domain o

  6. Bloch inductance in small-capacitance Josephson junctions.

    Science.gov (United States)

    Zorin, A B

    2006-04-28

    We show that the electrical impedance of a small-capacitance Josephson junction also includes, in addition to the capacitive term -i/(omega)CB, an inductive term i(omega)LB. Similar to the known Bloch capacitance CB(q), the Bloch inductance LB(q) also depends periodically on the quasicharge, q, and its maximum value achieved at q=e(mod 2e) always exceeds the value of the Josephson inductance of this junction LJ(phi) at fixed phi=0. The effect of the Bloch inductance on the dynamics of a single junction and a one-dimensional array is described.

  7. Multi-turn, printed surface coil inductance, and Q optimization.

    Science.gov (United States)

    Raad, A; Kan, S

    1993-03-01

    Wheeler's empirical inductance formula for a multi-turn, close-wound flat coil shows that the maximum inductance for a given length of wire occurs when the outer to inner radius ratios is equal to 15/7. A similar expression is proposed for a flat, printed spiral for surface coil antenna design by modifying one of the coefficients in Wheeler's formula. Measured inductance is in good agreement with this new formula and the optimum radius ratio for maximum inductance or Q is now of the order of 9/5.

  8. Effect of mutual inductance coupling on superconducting flux qubit decoherence

    Institute of Scientific and Technical Information of China (English)

    Yanyan Jiang; Hualan Xu; Yinghua Ji

    2009-01-01

    In the Born-Markov approximation and two-level approximation, and using the Bloch-Redfield equation, the decoherence property of superconducting quantum circuit with a flux qubit is investigated. The influence on decoherence of the mutual inductance coupling between the circuit components is complicated. The mutual inductance coupling between different loops will decrease the decoherence time. However, the mutual inductance coupling of the same loop, in a certain interval, will increase the decoherence time. Therefore, we can control the decoherence time by changing the mutual inductance parameters such as the strength and direction of coupling.

  9. Complex inductance, excess noise, and surface magnetism in dc SQUIDs.

    Science.gov (United States)

    Sendelbach, S; Hover, D; Mück, M; McDermott, R

    2009-09-11

    We have characterized the complex inductance of dc SQUIDs cooled to millikelvin temperatures. The SQUID inductance displays a rich, history-dependent structure as a function of temperature, with fluctuations of order 1 fH. At a fixed temperature, the SQUID inductance fluctuates with a 1/f power spectrum; the inductance noise is highly correlated with the conventional 1/f flux noise. The data are interpreted in terms of the reconfiguration of clusters of surface spins, with correlated fluctuations of effective magnetic moments and relaxation times.

  10. The Problem of Analogical Inference in Inductive Logic

    Directory of Open Access Journals (Sweden)

    Simon M. Huttegger

    2016-06-01

    Full Text Available We consider one problem that was largely left open by Rudolf Carnap in his work on inductive logic, the problem of analogical inference. After discussing some previous attempts to solve this problem, we propose a new solution that is based on the ideas of Bruno de Finetti on probabilistic symmetries. We explain how our new inductive logic can be developed within the Carnapian paradigm of inductive logic-deriving an inductive rule from a set of simple postulates about the observational process-and discuss some of its properties.

  11. Integrating Implicit Induction Proofs into Certified Proof Environments

    Science.gov (United States)

    Stratulat, Sorin

    We give evidence of the direct integration and automated checking of implicit induction-based proofs inside certified reasoning environments, as that provided by the Coq proof assistant. This is the first step of a long term project focused on 1) mechanically certifying implicit induction proofs generated by automated provers like Spike, and 2) narrowing the gap between automated and interactive proof techniques inside proof assistants such that multiple induction steps can be executed completely automatically and mutual induction can be treated more conveniently. Contrary to the current approaches of reconstructing implicit induction proofs into scripts based on explicit induction tactics that integrate the usual proof assistants, our checking methodology is simpler and fits better for automation. The underlying implicit induction principles are separated and validated independently from the proof scripts that consist in a bunch of one-to-one translations of implicit induction proof steps. The translated steps can be checked independently, too, so the validation process fits well for parallelisation and for the management of large proof scripts. Moreover, our approach is more general; any kind of implicit induction proof can be considered because the limitations imposed by the proof reconstruction techniques no longer exist. An implementation that integrates automatic translators for generating fully checkable Coq scripts from Spike proofs is reported.

  12. Feasibility of alternating induction and maintenance chemotherapy in pancreatic cancer.

    Science.gov (United States)

    Hann, Alexander; Bohle, Wolfram; Egger, Jan; Zoller, Wolfram

    2017-01-31

    Chemotherapy regimens for pancreatic ductal adenocarcinoma (PDAC) have changed since the introduction of FOLFIRINOX. Due to toxicity, dosage and number of applied cycles are limited. In analogy to chemotherapy strategies in colon cancer we used a scheme of induction, maintenance and re-induction therapy in PDAC to alleviate such toxicities and increase the number of applied cycles. Here we report first experiences with this approach. Data of all patients who received FOLFIRINOX for metastatic or locally advanced PDAC in our center using induction chemotherapy followed by maintenance therapy from 2011 until November 2016 was collected and analyzed retrospectively. Progression free survival was assessed starting induction therapy until progressive disease (PD) during maintenance or treatment pause (PFS1) and until progression during re-induction therapy (PFS2). 13 patients received induction therapy which was followed by maintenance therapy. Re-induction due to PD during therapy was applied in 11 patients. The median PFS1 was 10.6 months (95% CI; 6.7-14.4), PFS2 was 14.1 months (95% CI; 8.2-19.9) and overall survival was 18.3 months (95% CI; 14.8-21.8). The use of FOLFIRINOX as induction, followed by maintenance and re-induction therapy in case of PD is feasible in the treatment of PDAC and might lead to a prolonged PFS with less toxicity.

  13. Solar eclipse effect on geomagnetic induction parameters

    Directory of Open Access Journals (Sweden)

    A. Ádám

    2005-12-01

    Full Text Available The 11 August 1999 total solar eclipse had been studied using a large array of stations in Central Europe (Bencze et al., 2005. According to the result of this study, the amplitudes of the field line resonance (FLR-type pulsations decreased in and around the dark spot by about a factor of 2, and this decrease moved with the velocity of the dark spot in the same direction. This decrease was interpreted as a switch-off of the FLR-type pulsations, due to a change in the eigenperiod of the field line as a consequence of a change in the charged particle distribution along the field line. An effect was also found in the phase of the (magnetic or electric perpendicular components.

    At the Nagycenk (NCK observatory lying in the zone of totality, both magnetic and electric records were available. The magnetotelluric (MT sounding curve computed by the usual method for the eclipse interval (08:00-14:00 UT fits the previously known standard curve extremely well. During the eclipse, however, impedance values in the FLR period range were highly scattered. The scatter remained as long as the eclipse lasted. Coherence values between magnetic and electric components decreased significantly. In contrast, an earlier similar switch-off of the FLR-type activity on the same day did not cause a similar scatter, in spite of a comparably low coherence. Thus, the lack of FLR-type activity disturbed the usual MT connection between the magnetic and electric components during the eclipse.

    The induction vector (tipper, especially its real part, shows a clear effect of the eclipse in the FLR period range (24-29 s, too. Both at NCK and at Bad Bergzabern (BBZ, westernmost station and longest FLR period, a definite decrease in the real tipper was ascertained during the totality. The average direction of the tipper did not change.

    Concerning both parameters, a random effect cannot fully

  14. Polyploidy Induction of Pteroceltis tatarinowii Maxim

    Institute of Scientific and Technical Information of China (English)

    Lin ZHANG; Feng WANG; Zhongkui SUN; Cuicui ZHU; Rongwei CHEN

    2015-01-01

    3%Objective] This study was conducted to obtain tetraploid Pteroceltis tatari-nowi Maxim. with excel ent ornamental traits. [Method] The stem apex growing points of Pteroceltis tatarinowi Maxim. were treated with different concentrations of colchicine solution for different hours to figure out a proper method and obtain poly-ploids. [Result] The most effective induction was obtained by treatment with 0.6%-0.8% colchicine for 72 h with 34.2% mutation rate. Flow cytometry and chromosome observation of the stem apex growing point of P. tatarinowi Maxim. proved that the tetraploid plants were successful y obtained with chromosome number 2n=4x=36. [Conclusion] The result not only fil s the blank of polyploid breeding of P. tatarinowi , but also provides an effective way to broaden the methods of cultivation of fast-growing, high-quality, disease-resilience, new varieties of Pteroceltis.

  15. Pulsed current transformer for low inductive loads

    Science.gov (United States)

    Zielinski, Alex; Jamison, Keith; Bennett, John

    1987-10-01

    At the US Army Research, Development and Engineering Command (ARDEC), an effort was undertaken to couple an array of five capacitor banks to a low inductance load. To achieve currents which exceed the limit placed on the capacitor banks, pulse current transformers were used. This power system, termed CAPSTAR, was ultimately used to electromagnetically stress a round bore composite railgun barrel section. A mathematical model has been developed to simulate a capacitor power supply driving a pulse transformer with various secondary loads. The model was first tested by comparison to experimental results using a subscale pulse transformer. The calculated data points were in good agreement with the experiment. Minor adjustments to some circuit parameters to account for the transitory behavior of the circuit are described.

  16. Induction of genetic variability in oat

    Directory of Open Access Journals (Sweden)

    Jefferson Luis Meirelles Coimbra

    2007-01-01

    Full Text Available Genetic variability in plants can be maximized through techniques of induction to make selection of genotypeswith improved adaptation to cultivation conditions possible. For oat, these techniques are important for a sustainabledevelopment through plant breeding programs in southern Brazil. The effects of mutagens (one physical: 60Co gamma raysand two chemical agents: ethyl - methanesulfonate and methyl-methanesulfonate were compared in the segregating M2 andM3 generations derived from artificial hybridization and induced mutation to compare mechanisms of widening the geneticvariability of oat. The methodologies increased the genetic variability in the trait vegetative cycle effectively, by either increasingor reducing the number of days from emergence to full heading; both can be applied in oat breeding programs.

  17. Brief mindfulness induction reduces inattentional blindness.

    Science.gov (United States)

    Schofield, Timothy P; Creswell, J David; Denson, Thomas F

    2015-12-01

    Prior research has linked mindfulness to improvements in attention, and suggested that the effects of mindfulness are particularly pronounced when individuals are cognitively depleted or stressed. Yet, no studies have tested whether mindfulness improves declarative awareness of unexpected stimuli in goal-directed tasks. Participants (N=794) were either depleted (or not) and subsequently underwent a brief mindfulness induction (or not). They then completed an inattentional blindness task during which an unexpected distractor appeared on the computer monitor. This task was used to assess declarative conscious awareness of the unexpected distractor's presence and the extent to which its perceptual properties were encoded. Mindfulness increased awareness of the unexpected distractor (i.e., reduced rates of inattentional blindness). Contrary to predictions, no mindfulness×depletion interaction emerged. Depletion however, increased perceptual encoding of the distractor. These results suggest that mindfulness may foster awareness of unexpected stimuli (i.e., reduce inattentional blindness).

  18. Penetrating power of resonant electromagnetic induction imaging

    Science.gov (United States)

    Guilizzoni, Roberta; Watson, Joseph C.; Bartlett, Paul; Renzoni, Ferruccio

    2016-09-01

    The possibility of revealing the presence and identifying the nature of conductive targets is of central interest in many fields, including security, medicine, industry, archaeology and geophysics. In many applications, these targets are shielded by external materials and thus cannot be directly accessed. Hence, interrogation techniques are required that allow penetration through the shielding materials, in order for the target to be identified. Electromagnetic interrogation techniques represent a powerful solution to this challenge, as they enable penetration through conductive shields. In this work, we demonstrate the power of resonant electromagnetic induction imaging to penetrate through metallic shields (1.5-mm-thick) and image targets (having conductivities σ ranging from 0.54 to 59.77 MSm-1) concealed behind them.

  19. Induction of apoptotic cell death by putrescine

    DEFF Research Database (Denmark)

    Takao, Koichi; Rickhag, Karl Mattias; Hegardt, Cecilia

    2006-01-01

    of apoptosis was the finding that one of the key enzymes in the apoptotic process, caspase-3, was induced when DFMO was omitted from the growth medium. Furthermore, inhibition of the caspase activity significantly reduced the recruitment of cells to the sub-G1 fraction. In conclusion, deregulation of polyamine...... that overexpression of a metabolically stable ODC in CHO cells induced a massive cell death unless the cells were grown in the presence of the ODC inhibitor alpha-difluoromethylornithine (DFMO). Cells overexpressing wild-type (unstable) ODC, on the other hand, were not dependent on the presence of DFMO...... for their growth. The induction of cell death was correlated with a dramatic increase in cellular putrescine levels. Analysis using flow cytometry revealed perturbed cell cycle kinetics, with a large accumulation of cells with sub-G1 amounts of DNA, which is a typical sign of apoptosis. Another strong indication...

  20. Penetrating power of resonant electromagnetic induction imaging

    Directory of Open Access Journals (Sweden)

    Roberta Guilizzoni

    2016-09-01

    Full Text Available The possibility of revealing the presence and identifying the nature of conductive targets is of central interest in many fields, including security, medicine, industry, archaeology and geophysics. In many applications, these targets are shielded by external materials and thus cannot be directly accessed. Hence, interrogation techniques are required that allow penetration through the shielding materials, in order for the target to be identified. Electromagnetic interrogation techniques represent a powerful solution to this challenge, as they enable penetration through conductive shields. In this work, we demonstrate the power of resonant electromagnetic induction imaging to penetrate through metallic shields (1.5-mm-thick and image targets (having conductivities σ ranging from 0.54 to 59.77 MSm−1 concealed behind them.

  1. Heat transfer modeling an inductive approach

    CERN Document Server

    Sidebotham, George

    2015-01-01

    This innovative text emphasizes a "less-is-more" approach to modeling complicated systems such as heat transfer by treating them first as "1-node lumped models" that yield simple closed-form solutions. The author develops numerical techniques for students to obtain more detail, but also trains them to use the techniques only when simpler approaches fail. Covering all essential methods offered in traditional texts, but with a different order, Professor Sidebotham stresses inductive thinking and problem solving as well as a constructive understanding of modern, computer-based practice. Readers learn to develop their own code in the context of the material, rather than just how to use packaged software, offering a deeper, intrinsic grasp behind models of heat transfer. Developed from over twenty-five years of lecture notes to teach students of mechanical and chemical engineering at The Cooper Union for the Advancement of Science and Art, the book is ideal for students and practitioners across engineering discipl...

  2. Superconducting inductive displacement detection of a microcantilever

    Energy Technology Data Exchange (ETDEWEB)

    Vinante, A., E-mail: anvinante@fbk.eu [Istituto di Fotonica e Nanotecnologie, CNR - Fondazione Bruno Kessler, I-38123 Povo, Trento (Italy)

    2014-07-21

    We demonstrate a superconducting inductive technique to measure the displacement of a micromechanical resonator. In our scheme, a type I superconducting microsphere is attached to the free end of a microcantilever and approached to the loop of a dc Superconducting Quantum Interference Device (SQUID) microsusceptometer. A local magnetic field as low as 100 μT, generated by a field coil concentric to the SQUID, enables detection of the cantilever thermomechanical noise at 4.2 K. The magnetomechanical coupling and the magnetic spring are in good agreement with image method calculations assuming pure Meissner effect. These measurements are relevant to recent proposals of quantum magnetomechanics experiments based on levitating superconducting microparticles.

  3. Butterfly-valve inductive orientation detector

    Science.gov (United States)

    Garrett, Steven

    1980-04-01

    Relative changes of inductance ΔL/L of a single layer coil surrounding a thin electrically conducting disk which can rotate about an axis perpendicular to the coil axis are studied experimentally as a means of measuring angular displacements. ΔL/L is found to be a strong function of disk diameter and is weakly dependent on the ratio of disk thickness to electromagnetic skin depth when this ratio is of the order unity. Values of ΔL/L as a function of disk diameter are given for lead, brass and copper. Detection sensitivities using a resonant tank circuit or an astatic transformer are given in terms of ΔL/L and it is shown that sensitivities of the order of 10-3 to 10-4 deg are practical. Application of this system to the Rayleigh disk and cryogenic environments are emphasized and an expression for the magnetic torque due to detection currents is given.

  4. Novel 3-Phase Inductive Fault Current Limiter

    Science.gov (United States)

    Kosa, Janos

    The paper describes the inductive three-phase fault current limiter. In this work I examine the novel arrangements of the perfect closed superconducting loop made of HTS wire. I applied one iron core with 3 limbs and special loops for uniform temperature of the superconducting wire. In this work I present the results of my experiments with this device. I present the static and dynamic measured results of this solution. It has got several advantages e. g. fast switching and less fault power for high-power electric machines. The advantage of the equipment is that in the case of single-phase short circuit the current will decrease in all the three phases. This can be an appropriate solution for high power machines. For example, in the case of high-power electric motor if there is a single-phase breaking or a single phase short circuit, we can decrease the current in the three phases.

  5. Electromagnetic induction in non-uniform domains

    CERN Document Server

    Giesecke, A; Luddens, F; Stefani, F; Gerbeth, G; Léorat, J; Guermond, J -L

    2010-01-01

    Kinematic simulations of the induction equation are carried out for different setups suitable for the von-K\\'arm\\'an-Sodium (VKS) dynamo experiment. Material properties of the flow driving impellers are considered by means of high conducting and high permeability disks that are present in a cylindrical volume filled with a conducting fluid. Two entirely different numerical codes are mutually validated by showing quantitative agreement on Ohmic decay and kinematic dynamo problems using various configurations and physical parameters. Field geometry and growth rates are strongly modified by the material properties of the disks even if the high permeability/high conductivity material is localized within a quite thin region. In contrast the influence of external boundary conditions remains small. Utilizing a VKS like mean fluid flow and high permeability disks yields a reduction of the critical magnetic Reynolds number for the onset of dynamo action of the simplest non-axisymmetric field mode. However this decreas...

  6. Energy Optimal Control of Induction Motor Drives

    DEFF Research Database (Denmark)

    Abrahamsen, Flemming

    This thesis deals with energy optimal control of small and medium-size variable speed induction motor drives for especially Heating, Ventilation and Air-Condition (HVAC) applications. Optimized efficiency is achieved by adapting the magnetization level in the motor to the load, and the basic...... purpose is demonstrate how this can be done for low-cost PWM-VSI drives without bringing the robustness of the drive below an acceptable level. Four drives are investigated with respect to energy optimal control: 2.2 kW standard and high-efficiency motor drives, 22 kW and 90 kW standard motor drives....... The method has been to make extensive efficiency measurements within the specified operating area with optimized efficiency and with constant air-gap flux, and to establish reliable converter and motor loss models based on those measurements. The loss models have been used to analyze energy optimal control...

  7. Distributed generation induction and permanent magnet generators

    CERN Document Server

    Lai, L

    2007-01-01

    Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generators (IGs) are the cheapest and most commonly used technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples o better demonstrate how the integration of energy sources can be accomplished. The book also provides the ...

  8. Radio Frequencv Induction Plasma Spraying of Molybdenum

    Institute of Scientific and Technical Information of China (English)

    Jiang Xianliang(蒋显亮); Maher Boulos

    2003-01-01

    Radio frequency (RF) induction plasma was used to make free-standing depositionof molybdenum (Mo). The phenomena of particle melting, flattening, and stacking were inves-tigated. The effect of process parameters such as plasma power, chamber pressure, and spraydistance on the phenomena mentioned above was studied. Scanning electron microscopy (SEM)was used to analyze the plasma-processed powder, splats formed, and deposits obtained. Exper-imental results show that less Mo particles are spheroidized when compared to the number ofspheroidized tungsten (W) particles at the same powder feed rate under the same plasma spraycondition. Molten Mo particles can be sufficiently flattened on substrate. The influence of theprocess parameters on the flattening behavior is not significant. Mo deposit is not as dense as Wdeposit, due to the splash and low impact of molten Mo particles. Oxidation of the Mo powderwith a large particle size is not evident under the low pressure plasma spray.

  9. Helical chirality induction of expanded porphyrin analogues

    Indian Academy of Sciences (India)

    Jun-Ichiro Setsune

    2012-11-01

    Expanded porphyrin analogues with unique figure-eight conformation were prepared by way of useful pyrrole intermediates such as bis(azafulvene)s and 2-borylpyrrole. Supramolecular chirogenesis of cyclooctapyrrole O1 with 32-cycloconjugation was successfully applied to determine absolute configuration of chiral carboxylic acids. Dinuclear CuII complex of cyclooctapyrrole O2 with interrupted -conjugation was resolved by HPLC into enantiomers and their helical handedness was determined by theoretical simulation of their CD spectral pattern. Enantioselective induction of helicity in the metal helicate formation in the presence of a chiral promoter was demonstrated by using ()-(+)-1-(1-phenyl)ethylamine that favoured , helicity. Dinuclear CoII complexes of cyclotetrapyrroletetrapyridine O3 were found to be substitution labile and pick up amino acid anions in water. Those amino acid complexes of O3Co2 were rendered to adopt a particular unidirectional helical conformation preferentially depending on the ligated amino acid anion.

  10. Inductively guided circuits for ultracold dressed atoms

    CERN Document Server

    Sinuco-Leon, German; Arnold, Aidan S; Garraway, Barry M

    2014-01-01

    We propose a flexible and robust scheme to create closed quasi-one dimensional guides for ultra-cold atoms through the dressing of hyperfine sub-levels of the atomic ground state. The dressing field is spatially modulated by inductive effects over a micro-engineered conducting loop, freeing the trapping region from leading wires in its proximity. We show that arrays of connected ring traps can also be created by carefully designing the shape of the conducting loop. We report on characteristics of the trap and mechanisms that limit the range of parameters available for experimental implementation, including non-adiabatic losses and heat dissipation by induced currents. We outline conditions to select appropriate parameters for operation of the trap with atom-chip technology.

  11. Electrothermal Model of Kinetic Inductance Detectors

    CERN Document Server

    Thomas, Christopher N; Goldie, David J

    2014-01-01

    An electrothermal model of Kinetic Inductance Detectors (KIDs) is described. The non-equilibrium state of the resonator's quasiparticle system is characterized by an effective temperature, which because of readout-power heating is higher than that of the bath. By balancing the flow of energy into the quasiparticle system, it is possible to calculate the steady-state large-signal, small-signal and noise behaviour. Resonance-curve distortion and hysteretic switching appear naturally within the framework. It is shown that an electrothermal feedback process exists, which affects all aspects of behaviour. It is also shown that generation-recombination noise can be interpreted in terms of the thermal fluctuation noise in the effective thermal conductance that links the quasiparticle and phonon systems of the resonator. Because the scheme is based on electrothermal considerations, multiple elements can be added to simulate the behaviour of complex devices, such as resonators on membranes, again taking into account r...

  12. Modeling a Cold Crucible Induction Heated Melter

    Energy Technology Data Exchange (ETDEWEB)

    Grant L. Hawkes

    2003-06-01

    FIDAP has been used to simulate melting of radioactive waste glass in a cold crucible induction heated melter. A model has been created that couples the magnetic vector potential (real and imaginary) to a transient startup of the melting process. This magnetic field is coupled to the mass, momentum, and energy equations that vary with time and position as the melt grows. The coupling occurs with the electrical conductivity of the glass as it rises above the melt temperature of the glass and heat is generated. Natural convection within the molten glass helps determine the shape of the melt as it progresses in time. An electromagnetic force is also implemented that is dependent on the electrical properties and frequency of the coil. This study shows the progression of the melt shape with time along with temperatures, power input, velocities, and magnetic vector potential. A power controller is implemented that controls the primary coil current and power.

  13. Modeling a Cold Crucible Induction Heated Melter

    Energy Technology Data Exchange (ETDEWEB)

    Hawkes, G.L.

    2003-05-09

    FIDAP has been used to simulate melting of radioactive waste glass in a cold crucible induction heated melter. A model has been created that couples the magnetic vector potential (real and imaginary) to a transient startup of the melting process. This magnetic field is coupled with mass, momentum, and energy equations that vary with time and position as the melt grows. The coupling occurs with the electrical conductivity of the glass as it rises above the melt temperature of the glass and heat is generated. Natural convection within the molten glass helps determine the shape of the melt as it progresses in time. An electromagnetic force is also implemented that is dependent on the electrical properties and frequency of the coil. This study shows the progression of the melt shape with time along with temperatures, power input, velocities, and magnetic vector potential. A power controller is implemented that controls the primary coil current and power.

  14. Fuzzy efficiency optimization of AC induction motors

    Science.gov (United States)

    Jani, Yashvant; Sousa, Gilberto; Turner, Wayne; Spiegel, Ron; Chappell, Jeff

    1993-01-01

    This paper describes the early states of work to implement a fuzzy logic controller to optimize the efficiency of AC induction motor/adjustable speed drive (ASD) systems running at less than optimal speed and torque conditions. In this paper, the process by which the membership functions of the controller were tuned is discussed and a controller which operates on frequency as well as voltage is proposed. The membership functions for this dual-variable controller are sketched. Additional topics include an approach for fuzzy logic to motor current control which can be used with vector-controlled drives. Incorporation of a fuzzy controller as an application-specific integrated circuit (ASIC) microchip is planned.

  15. Some remarks about flux linkage and inductance

    Directory of Open Access Journals (Sweden)

    S. Kurz

    2004-01-01

    Full Text Available In the area of computational electromagnetics there is an increasing demand for various coupled simulations. One example is the coupling between field and circuit simulation for the description of electromagnetic devices. In the context of such couplings, theoretical questions arise as well. How can a field device be represented as an equivalent multiport circuit element? What is meant by flux linkage if the considered conductors are not filamentary? What is meant by inductance if the magnetic media exhibit nonlinear behaviour? These questions and their answers are not new. However, according to the author’s view, these issues are not sufficiently addressed in the usual textbooks. The aim of the paper is therefore to (hopefully answer the questions concisely and correctly. The modern language of differential forms will be employed for this purpose.

  16. Emittance growth in linear induction accelerators

    CERN Document Server

    Ekdahl, C A; Schulze, M E; Carlson, C A; Frayer, D K; Mostrum, C; Thoma, C H

    2014-01-01

    The Dual-Axis Radiographic Hydrotest (DARHT) facility uses bremsstrahlung radiation source spots produced by the focused electron beams from two linear induction accelerators (LIAs) to radiograph large hydrodynamic experiments driven by high explosives. Radiographic resolution is determined by the size of the source spot, and beam emittance is the ultimate limitation to spot size. On the DARHT Axis-II LIA we measure an emittance higher than predicted by theoretical simulations, and even though this axis produces sub-millimeter source spots, we are exploring ways to improve the emittance. Some of the possible causes for the discrepancy have been investigated using particle-in-cell (PIC) codes, although most of these are discounted based on beam measurements. The most likely source of emittance growth is a mismatch of the beam to the magnetic transport, which can cause beam halo.

  17. SPACEKIDS: kinetic inductance detectors for space applications

    Science.gov (United States)

    Griffin, M.; Baselmans, J.; Baryshev, A.; Doyle, S.; Grim, M.; Hargrave, P.; Klapwijk, T.; Martin-Pintado, J.; Monfardini, A.; Neto, A.; Steenbeek, H.; Walker, I.; Wood, K.; D'Addabbo, A.; Barry, P.; Bideaud, A.; Blázquez, B.; Bueno, J.; Calvo, M.; Costa-Kramer, J.-L.; Ferrari, L.; Gómez-Gutiérrez, A.; Goupy, J.; Llombart, N.; Yates, S.

    2016-07-01

    SPACEKIDS, a European Union FP-7 project, has recently been completed. It has focused on developing kinetic inductance detector (KID) arrays and demonstrating their suitability for space applications at far infrared and submillimetre wavelengths. KID arrays have been developed for both low-background (typical of astrophysical applications) and high-background (typical of Earth-observation applications), based on performance specifications derived from the science requirements of representative potential future missions. KID pixel and array designs have been developed, together with readout electronics necessary to read out large numbers of pixels. Two laboratory demonstrator systems have been built and used for comprehensive evaluation of large-format array characteristics and performance in environments representative of both astronomy and Earth observing applications. We present an overview of the SPACEKIDS project and a summary of its main results and conclusions.

  18. Inductive Measurement of Plasma Jet Electrical Conductivity

    Science.gov (United States)

    Turner, Matthew W.; Hawk, Clark W.; Litchford, Ron J.

    2005-01-01

    An inductive probing scheme, originally developed for shock tube studies, has been adapted to measure explosive plasma jet conductivities. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-inch diameter probe was designed and constructed, and calibration was accomplished by firing an aluminum slug through the probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-gram high explosive shaped charges. Measured conductivities were in the range of 3 kS/m for unseeded octol charges and 20 kS/m for seeded octol charges containing 2% potassium carbonate by mass.

  19. Rapid induction of false memory for pictures.

    Science.gov (United States)

    Weinstein, Yana; Shanks, David R

    2010-07-01

    Recognition of pictures is typically extremely accurate, and it is thus unclear whether the reconstructive nature of memory can yield substantial false recognition of highly individuated stimuli. A procedure for the rapid induction of false memories for distinctive colour photographs is proposed. Participants studied a set of object pictures followed by a list of words naming those objects, but embedded in the list were names of unseen objects. When subsequently shown full colour pictures of these unseen objects, participants consistently claimed that they had seen them, while discriminating with high accuracy between studied pictures and new pictures whose names did not appear in the misleading word list. These false memories can be reported with high confidence as well as the feeling of recollection. This new procedure allows the investigation of factors that influence false memory reports with ecologically valid stimuli and of the similarities and differences between true and false memories.

  20. Induction and Deduction in Baysian Data Analysis

    Directory of Open Access Journals (Sweden)

    Andrew Gelman

    2011-01-01

    Full Text Available The classical or frequentist approach to statistics (in which inference is centered on significance testing, is associated with a philosophy in which science is deductive and follows Popperis doctrine of falsification. In contrast, Bayesian inference is commonly associated with inductive reasoning and the idea that a model can be dethroned by a competing model but can never be directly falsified by a significance test. The purpose of this article is to break these associations, which I think are incorrect and have been detrimental to statistical practice, in that they have steered falsificationists away from the very useful tools of Bayesian inference and have discouraged Bayesians from checking the fit of their models. From my experience using and developing Bayesian methods in social and environmental science, I have found model checking and falsification to be central in the modeling process.

  1. Biochanin A induction of sulfotransferases in rats.

    Science.gov (United States)

    Chen, Yue; Huang, Chaoqun; Zhou, Tianyan; Zhang, Shunfen; Chen, Guangping

    2010-01-01

    Biochanin A (BCA) is a dietary isoflavone present in red clover (Trifoliumn pretense) and many herbal products. BCA has been reported to have chemopreventive actions against various cancers including prostate, breast, colon cancer, and so on. Sulfotransferases are a family of phase II drug-metabolizing enzymes, which are important for xenobiotic detoxification and regulation of biological signaling molecule biological activities. Sulfotransferase gene expressions are regulated by different hormones and xenobiotics. Improper regulation of sulfotransferases leads to improper functions of biological signaling molecules, which in turn can cause cancer or other diseases. BCA inhibits the enzyme activities of the phase I drug-metabolizing enzymes CYP1A1 and CYP1B1 in Chinese hamster ovary cells and induces the phase II drug-metabolizing enzymes UDP-glucuronosyltransferases in human prostate cancer cells. BCA induction of sulfotransferases has not been studied. This investigation evaluates the in vivo regulation of sulfotransferases at protein and mRNA levels in the liver and intestine of Sprague-Dawley rats treated with BCA (0, 2, 10, and 50 mg/kg/day) for 7 days. Our experimental results demonstrate for the first time that chronic BCA treatment can significantly induce the expression of rat sulfotransferase 1A1 (rSULT1A1, AST-IV), sulfotransferase 2A1 (rSULT2A1, STa), and rat estrogen sulfotransferase (rSULT1E1, EST) in rat liver and intestine. Our Western blot results are in good agreement with real-time RT-PCR data, suggesting that BCA induction of sulfotransferases occurs at the transcriptional level.

  2. A portable magnetic induction measurement system (PIMS).

    Science.gov (United States)

    Cordes, Axel; Foussier, Jérôme; Pollig, Daniel; Leonhardt, Steffen

    2012-02-22

    For contactless monitoring of ventilation and heart activity, magnetic induction measurements are applicable. As the technique is harmless for the human body, it is well suited for long-term monitoring solutions, e.g., bedside monitoring, monitoring of home care patients, and the monitoring of persons in critical occupations. For such settings, a two-channel portable magnetic induction system has been developed, which is small and light enough to be fitted in a chair or bed. Because demodulation, control, and filtering are implemented on a front-end digital signal processor, a PC is not required (except for visualization/data storage during research and development). The system can be connected to a local area network (LAN) or wireless network (WiFi), allowing to connect several devices to a large monitoring system, e.g., for a residential home for the elderly or a hospital with low-risk patients not requiring standard ECG monitoring. To visualize data streams, a Qt-based (Qt-framework by Nokia, Espoo, Finland) monitoring application has been developed, which runs on Netbook computers, laptops, or standard PCs. To induce and measure the magnetic fields, external coils and amplifiers are required. This article describes the system and presents results for monitoring respiration and heart activity in a (divan) bed and for respiration monitoring in a chair. Planar configurations and orthogonal coil setups were examined during the measurement procedures. The measurement data were streamed over a LAN to a monitoring PC running Matlab (The MathWorks Inc, Natick, MA, USA).

  3. Biomimetism, biomimetic matrices and the induction of bone formation.

    Science.gov (United States)

    Ripamonti, Ugo

    2009-09-01

    the induction of bone formation, the emergence of the skeleton, of the vertebrates and of Homo species * Different strategies for the induction of bone formation. Biological significance of redundancy and synergistic induction of bone formation. Biomimetism and biomimetic matrices self-assembling the induction of bone formation The concavity: the shape of life and the induction of bone formation. Influence of geometry on the expression of the osteogenic phenotype. Conclusion and therapeutic perspectives on porous biomimetic matrices with intrinsic osteoinductivity Bone formation by induction initiates by invocation of osteogenic soluble molecular signals of the transforming growth factor-beta (TGF-beta) superfamily; when combined with insoluble signals or substrata, the osteogenic soluble signals trigger the ripple-like cascade of cell differentiation into osteoblastic cell lines secreting bone matrix at site of surgical implantation. A most exciting and novel strategy to initiate bone formation by induction is to carve smart self-inducing geometric concavities assembled within biomimetic constructs. The assembly of a series of repetitive concavities within the biomimetic constructs is endowed with the striking prerogative of differentiating osteoblast-like cells attached to the biomimetic matrices initiating the induction of bone formation as a secondary response. Importantly, the induction of bone formation is initiated without the exogenous application of the osteogenic soluble molecular signals of the TGF-beta superfamily. This manuscript reviews the available data on this fascinating phenomenon, i.e. biomimetic matrices that arouse and set into motion the mammalian natural ability to heal thus constructing biomimetic matrices that in their own right set into motion inductive regenerative phenomena initiating the cascade of bone differentiation by induction biomimetizing the remodelling cycle of the primate cortico-cancellous bone.

  4. THE CARDIOVASCULAR EFFECTS OF MIDAZOLAM CO-INDUCTION TO PROPOFOL FOR INDUCTION IN GERIATRIC PATIENTS

    Directory of Open Access Journals (Sweden)

    Kaushal

    2014-10-01

    Full Text Available : BACKGROUND: The aim of the study was to investigate whether a small dose of midazolam and lessening the propofol dosage could prevent the cardiovascular change at tracheal intubation for induction in geriatric patients. METHODS: ninety patients over 65 (ASA physical status 1, 2 scheduled for elective surgery received general anaesthesia with fentanyl and propofol or midazolam. Patients in group P (n= 45 were induced with 0.9% NaCl 0.03 ml /kg, propofol 1.2 mg/kg and fentanyl. Patients in group MP (n= 45 were induced with midazolam 0.03 mg/ kg, propofol 0.8 mg/kg and fentanyl. The time taken to reach loss of consciousness (LOC. After LOC 0.5 mg/kg of atracurium was given and tracheal intubation was performed. The mean blood pressure (MBP and heart rate (HR were recorded were induction as the base value, before intubation, immediately post intubation and 3 minutes after intubation. RESULT: compared with the base values, MBP at before intubation and # minutes after intubation was significantly decreased in group P and group MP (P <0.05. compared with group P, the decrease of MBP was significantly less at before intubation, immediately after intubation and 3 minutes after intubation in group MP (P<0.05. The time taken to reach LOC was significantly decreased in group MP compared with that in group P (P<0.05. There was no significant difference of HR at any time between the two groups. CONCLUSION: co-induction with midazolam and propofol could prevent a marked BP decrease at tracheal intubation for induction in geriatric patients.

  5. Dynamics of 'abc' and 'qd' constant parameters induction generator model

    DEFF Research Database (Denmark)

    Fajardo-R, L.A.; Medina, A.; Iov, F.

    2009-01-01

    In this paper, parametric sensibility effects on dynamics of the induction generator in the presence of local perturbations are investigated. The study is conducted in a 3x2 MW wind park dealing with abc, qd0 and qd reduced order, induction generator model respectively, and with fluxes as state v...

  6. Factors influencing callus induction and plant regeneration of ...

    African Journals Online (AJOL)

    ajl yemi

    2012-01-12

    Jan 12, 2012 ... order to optimize the callus induction and plant rege- neration from ... To determine the role of basal medium for callus induction and plant .... Chu CC, Wang CS, Sun CC, Hsu C, Yin KC, Chu CY, Bi FY (1975). Establishment of ...

  7. Recent Declines in Induction of Labor by Gestational Age

    Science.gov (United States)

    ... Hispanic origin. Rates for non-Hispanic white women decreased 6%–11% for all three gestational weeks. ... Individual live birth in a singleton (one fetus) pregnancy. Singleton induction rate : Number of labor inductions for singleton births per ...

  8. Low-Inductance Wiring For Parallel Switching Transistors

    Science.gov (United States)

    Veatch, M. S.; Landis, D. M.

    1990-01-01

    Simple configuration for wiring of multiple parallel-connected switching transistors minimizes stray wiring inductance while providing for use of balancing transformers, which equalize currents in transistors. Currents balanced on twisted pairs of wires. Because twisted pairs carry both "hot-side" and return currents, this configuration has relatively low inductance.

  9. Module Eight: Induction; Basic Electricity and Electronics Individualized Learning System.

    Science.gov (United States)

    Bureau of Naval Personnel, Washington, DC.

    The module covers in greater depth electromagnetic induction, its effects, and how it is used to advantage in electrical circuits; and the physical components, called inductors, designed to take advantage of the phenomenon of electromagnetic induction. This module is divided into four lessons: electromagnetism; inductors and flux density, inducing…

  10. Determination of the Self-Inductance of a Metal Ring.

    Science.gov (United States)

    Mak, S. Y.; Young, K.

    1986-01-01

    Describes a simple method for determining self-inductance of non-ferromagnetic rings. Suggests fitting the ring with an auxiliary coil and using a solenoid driven with a known frequency alternating current. Amplitude change and phase shift can be measured and used to calculate inductance. Material list, calculations, and sample results are given.…

  11. [Inductance transducers for borderline localization of metallic foreign bodies].

    Science.gov (United States)

    Pudov, V I; Reutov, Iu Ia; Korotkikh, S A

    1996-01-01

    The paper outlines the advantages and disadvantages of a ferroprobe inductance transducer used in the borderline localization of a foreign ferromagnetic body. To eliminate the ferroprobe transducer-inherent disadvantages, a whirl-current inductance transducer has been developed. The transducer localizes a foreign nonferromagnetic and ferromagnetic body in its borderline localization in the eye and in the whole body.

  12. INDUCTION OF DECISION TREES BASED ON A FUZZY NEURAL NETWORK

    Institute of Scientific and Technical Information of China (English)

    Tang Bin; Hu Guangrui; Mao Xiaoquan

    2002-01-01

    Based on a fuzzy neural network, the letter presents an approach for the induction of decision trees. The approach makes use of the weights of fuzzy mappings in the fuzzy neural network which has been trained. It can realize the optimization of fuzzy decision trees by branch cutting, and improve the ratio of correctness and efficiency of the induction of decision trees.

  13. Robust Speed and Parameter Estimation in Induction Motors

    DEFF Research Database (Denmark)

    Børsting, H.; Vadstrup, P.

    1995-01-01

    This paper presents a Model Reference Adaptive System (MRAS) for the estimation of the induction motor speed, based on measured terminal voltages and currents.......This paper presents a Model Reference Adaptive System (MRAS) for the estimation of the induction motor speed, based on measured terminal voltages and currents....

  14. Induction Motor Speed Estimation by Using Spectral Current Analysis

    OpenAIRE

    2009-01-01

    An interesting application for the FFT analysis is related to the induction motor speed estimation based on spectral current analysis. The paper presents the possibility of induction motor speed estimation by using the current harmonics generated because of the rotor slots and of the eccentricity.

  15. The False Coin Problem, Mathematical Induction and Knowledge Fragility.

    Science.gov (United States)

    Movshovitz-Hadar, Nitsa

    1993-01-01

    Shows fragility of knowledge in connection with a false application of mathematical induction, as observed in a problem-solving course for prospective teachers. The attempt to explain the observations is based upon an analysis of the logic underlying proof by mathematical induction and a concept formation theory. (MKR)

  16. Mathematical Induction and Recursive Definition in Teaching Training

    Science.gov (United States)

    Vármonostory, Endre

    2009-01-01

    The method of proof by mathematical induction follows from Peano axiom 5. We give three properties which are often used in the proofs by mathematical induction. We show that these are equivalent. Supposing the well-ordering property we prove the validity of this method without using Peano axiom 5. Finally, we introduce the simplest form of…

  17. A Literature Review of Pedagogical Research on Mathematical Induction

    Science.gov (United States)

    Michaelson, Matthew T.

    2008-01-01

    Many students experience considerable difficulties when they learn and then attempt to construct and communicate proofs of conjectures using the principle of mathematical induction. Although research on the pedagogy of mathematical induction has gained only occasional attention since the 1970s, there has been an increasing interest in this field…

  18. Mathematics Induction in School; An Illusion of Rigor.

    Science.gov (United States)

    Lowenthal, Francis; Eisenberg, Theodore

    1992-01-01

    Discusses the mathematical, philosophical, and pedagogical problems in the theorem of mathematical induction. Argues that mathematical induction is a meta-theorem, that is a theorem within a theorem, whose pitfalls and illusions of rigor should be discussed before implementation into the school curriculum. (MDH)

  19. The Use of Models in Teaching Proof by Mathematical Induction

    Science.gov (United States)

    Ron, Gila; Dreyfus, Tommy

    2004-01-01

    Proof by mathematical induction is known to be conceptually difficult for high school students. This paper presents results from interviews with six experienced high school teachers, concerning the use of models in teaching mathematical induction. Along with creative and adequate use of models, we found explanations, models and examples that…

  20. A Factor Analytic Study of Inductive Reasoning Tests.

    Science.gov (United States)

    Ross, G. Robert

    A set of eight widely used inductive reasoning tests were investigated to determine whether or not they have different factorial structures. The eight inductive tests and three deductive tests, taken from the French Kit of Reference Tests for Cognitive Factors and the Watson-Glaser Critical Thinking Appraisal, were administered to 157 high school…

  1. 14 CFR 121.283 - Induction system ice prevention.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Induction system ice prevention. 121.283 Section 121.283 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Induction system ice prevention. A means for preventing the malfunctioning of each engine due to...

  2. 14 CFR 125.181 - Induction system ice prevention.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Induction system ice prevention. 125.181 Section 125.181 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Requirements § 125.181 Induction system ice prevention. A means for preventing the malfunctioning of...

  3. The Relationship between Mathematical Induction, Proposition Functions, and Implication Functions

    Science.gov (United States)

    Andrew, Lane

    2010-01-01

    In this study, I explored the relationship between mathematical induction ability and proposition and implication functions through a mixed methods approach. Students from three universities (N = 78) and 6 classrooms completed a written assessment testing their conceptual and procedural capabilities with induction and functions. In addition, I…

  4. Induction heating of mastic containing conductive fibers and fillers

    NARCIS (Netherlands)

    García, Á.; Schlangen, E.; Ven, M. van de; Vliet, D. van

    2011-01-01

    The objective of this research is to examine the induction heating of mastic through the addition of electrically conductive fillers and fibers (graphite and steel wool), and to prove that this material can be healed with induction energy. The effect of fibers content, sand-bitumen ratio and the com

  5. Induction heating of mastic containing conductive fibers and fillers

    NARCIS (Netherlands)

    García, Á.; Schlangen, E.; Van de Ven, M.; Van Vliet, D.

    The objective of this research is to examine the induction heating of mastic through the addition of electrically conductive fillers and fibers (graphite and steel wool), and to prove that this material can be healed with induction energy. The effect of fibers content, sand–bitumen ratio and the com

  6. LTP Induction Modifies Functional Relationship among Hippocampal Neurons

    Science.gov (United States)

    Yun, Sung H.; Lee, Deok S.; Lee, Hyunjung; Baeg, Eun H.; Kim, Yun B.; Jung, Min W.

    2007-01-01

    To obtain evidence linking long-term potentiation (LTP) and memory, we examined whether LTP induction modifies functional relationship among neurons in the rat hippocampus. In contrast to neurons in low-frequency stimulated or AP5-treated slices, LTP induction altered "functional connectivity," as defined by the degree of synchronous firing, among…

  7. Causal Relations and Feature Similarity in Children's Inductive Reasoning

    Science.gov (United States)

    Hayes, Brett K.; Thompson, Susan P.

    2007-01-01

    Four experiments examined the development of property induction on the basis of causal relations. In the first 2 studies, 5-year-olds, 8-year-olds, and adults were presented with triads in which a target instance was equally similar to 2 inductive bases but shared a causal antecedent feature with 1 of them. All 3 age groups used causal relations…

  8. Differential Involvement of Left Prefrontal Cortexin Inductive and Deductive Reasoning

    Science.gov (United States)

    Goel, Vinod; Dolan, Raymond J.

    2004-01-01

    While inductive and deductive reasoning are considered distinct logical and psychological processes, little is known about their respective neural basis. To address this issue we scanned 16 subjects with fMRI, using an event-related design, while they engaged in inductive and deductive reasoning tasks. Both types of reasoning were characterized by…

  9. Performance of a Folded-Strip Toroidally Wound Induction Machine

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech; Jack, Alan G.; Atkinson, Glynn J.

    2011-01-01

    This paper presents the measured experimental results from a four-pole toroidally wound induction machine, where the stator is constructed as a pre-wound foldable strip. It shows that if the machine is axially restricted in length, the toroidally wound induction machine can have substantially...

  10. 32 CFR 154.15 - Military appointment, enlistment, and induction.

    Science.gov (United States)

    2010-07-01

    ... active duty of any officer or enlisted regular/reserve military retiree or Individual Ready Reserve who... 32 National Defense 1 2010-07-01 2010-07-01 false Military appointment, enlistment, and induction... Requirements § 154.15 Military appointment, enlistment, and induction. (a) General. The appointment,...

  11. Stakeholder Informed Non-Traditional Student Induction: A Balanced Approach

    Science.gov (United States)

    Soontiens, Werner; Kerr, Rosemary; Ang, Grace; Scully, Glennda

    2016-01-01

    Purpose: The purpose of this paper is to consider the evolution of a tailored university induction program over time to establish the change in the nature and content of the program. Design/ Methodology/Approach: The induction program is pitched against the conceptual backdrop of academic norms and conventions, language, integration and the role…

  12. Induction, Social Constructionism, and the Form of the Science Paper.

    Science.gov (United States)

    Markel, Mike

    1993-01-01

    Reviews the challenge to Baconian induction and the insights of social constructionism. Discusses the convergence of these two theories in the controversy about the inductive organization of the science paper, arguing that the critical factor in determining the fidelity of the paper to the science is not the paper's organization but the writer's…

  13. Outcome of Induction and Associated Factors among Term and Post

    African Journals Online (AJOL)

    GB

    354 records ... induction with oxytocin to vaginal delivery and till diagnosis of failed induction were 6:10 ± 3:09 and. 9:57± 2:01 hours ... eclampsia. Labor may also be induced for logistic ... achieving active labor within a specified time, or failure to ...

  14. Characterizing Inductive and Capacitive Nonlinear RLC Circuits : A Passivity Test

    NARCIS (Netherlands)

    García-Canseco, Eloísa; Jeltsema, Dimitri; Ortega, Romeo; Scherpen, Jacquelien M.A.

    2004-01-01

    Linear time-invariant RLC circuits are said to be inductive (capacitive) if the current waveform in sinusoidal steady-state has a negative (resp., positive) phase shift with respect to the voltage. Furthermore, it is known that the circuit is inductive (capacitive) if and only if the magnetic energy

  15. Induction and direct resistance heating theory and numerical modeling

    CERN Document Server

    Lupi, Sergio; Aliferov, Aleksandr

    2015-01-01

    This book offers broad, detailed coverage of theoretical developments in induction and direct resistance heating and presents new material on the solution of problems in the application of such heating. The physical basis of induction and conduction heating processes is explained, and electromagnetic phenomena in direct resistance and induction heating of flat workpieces and cylindrical bodies are examined in depth. The calculation of electrical and energetic characteristics of induction and conduction heating systems is then thoroughly reviewed. The final two chapters consider analytical solutions and numerical modeling of problems in the application of induction and direct resistance heating, providing industrial engineers with the knowledge needed in order to use numerical tools in the modern design of installations. Other engineers, scientists, and technologists will find the book to be an invaluable reference that will assist in the efficient utilization of electrical energy.

  16. Strong induction effects during the substorm on 27 August 2001

    Science.gov (United States)

    Mishin, V. V.; Mishin, V. M.; Lunyushkin, S. B.; Pu, Z.; Wang, C.

    2015-10-01

    We report on strong induction effects notably contributing to the cross polar cap potential drop and the energy balance during the growth and active phases of the substorm on 27 August 2001. The inductance of the magnetosphere is found to be crucial for the energy balance and electrical features of the magnetosphere in the course of the substorm. The inductive response to the switching on and off of the solar wind-magnetosphere generator exceeds the effect of the interplanetary magnetic field (IMF) variation. The induction effects are most apparent during the substorm expansion onset when the rapid growth of the ionospheric conductivity is accompanied by the fast release of the magnetic energy stored in the magnetotail during the growth phase. Using the magnetogram inversion technique, we estimated the magnetospheric inductance and effective ionospheric conductivity during the loading and unloading phases.

  17. DESIGN OF A 500W RESONANT INDUCTION HEATER

    Directory of Open Access Journals (Sweden)

    Bekir Sami SAZAK

    1999-01-01

    Full Text Available In this paper a complete design procedure for a 500W induction heating system is given. An induction heating system basically consists of a coil and a DC/AC inverter. The use of a single switch resonant inverter, which is operated with Discontinuous Conduction Mode (DCM, allows the switching device to turn off under zero current conditions, therefore switching losses are much reduced. This inverter system transforms the DC into AC for the induction heater coil. The proposed coil design method is applicable to a load of any shape so long as the coil surrounds the workpiece. The basis of this method of coil design is the reduction of the induction heater coil and workpiece to their equivalent resistance and inductance.

  18. Sonographic assessment of the cervical length before induction of labor

    Institute of Scientific and Technical Information of China (English)

    Ibrahim A Abdelazim; Mohannad Lutfi Abu faza

    2012-01-01

    Objective:To compare the cervical length measured by TVS with modified Bishop’s score for cervical assessment before induction of labor. Methods:One hundred and twenty women in their first pregnancy were admitted for induction of labor. Digital vaginal examination was done to record the modified Bishop’s score, followed by TVS to detect the cervical length. The method of induction of labor was decided after the initial vaginal examination, when the modified Bishop’s score was evaluated. Dinoprostone pessary was used for labor induction if the Bishop score was5. Conclusions:Both methods of cervical assessment (cervical length measured by TVS, and modified Bishop’s score) were significantly associated with successful induction.

  19. The myth of induction in qualitative nursing research.

    Science.gov (United States)

    Bergdahl, Elisabeth; Berterö, Carina M

    2015-04-01

    In nursing today, it remains unclear what constitutes a good foundation for qualitative scientific inquiry. There is a tendency to define qualitative research as a form of inductive inquiry; deductive practice is seldom discussed, and when it is, this usually occurs in the context of data analysis. We will look at how the terms 'induction' and 'deduction' are used in qualitative nursing science and by qualitative research theorists, and relate these uses to the traditional definitions of these terms by Popper and other philosophers of science. We will also question the assertion that qualitative research is or should be inductive. The position we defend here is that qualitative research should use deductive methods. We also see a need to understand the difference between the creative process needed to create theory and the justification of a theory. Our position is that misunderstandings regarding the philosophy of science and the role of inductive and deductive logic and science are still harming the development of nursing theory and science. The purpose of this article is to discuss and reflect upon inductive and deductive views of science as well as inductive and deductive analyses in qualitative research. We start by describing inductive and deductive methods and logic from a philosophy of science perspective, and we examine how the concepts of induction and deduction are often described and used in qualitative methods and nursing research. Finally, we attempt to provide a theoretical perspective that reconciles the misunderstandings regarding induction and deduction. Our conclusion is that openness towards deductive thinking and testing hypotheses is needed in qualitative nursing research. We must also realize that strict induction will not create theory; to generate theory, a creative leap is needed.

  20. Knowledge, expectations, and inductive reasoning within conceptual hierarchies.

    Science.gov (United States)

    Coley, John D; Hayes, Brett; Lawson, Christopher; Moloney, Michelle

    2004-01-01

    Previous research (e.g. Cognition 64 (1997) 73) suggests that the privileged level for inductive inference in a folk biological conceptual hierarchy does not correspond to the "basic" level (i.e. the level at which concepts are both informative and distinct). To further explore inductive inference within conceptual hierarchies, we examine relations between knowledge of concepts at different hierarchical levels, expectations about conceptual coherence, and inductive inference. In Experiments 1 and 2, 5- and 8-year-olds and adults listed features of living kind (Experiments 1 and 2) and artifact (Experiment 2) concepts at different hierarchical levels (e.g. plant, tree, oak, desert oak), and also rated the strength of generalizations to the same concepts. For living kinds, the level that showed a relative advantage on these two tasks differed; the greatest increase in features listed tended to occur at the life-form level (e.g. tree), whereas the greatest increase in inductive strength tended to occur at the folk-generic level (e.g. oak). Knowledge and induction also showed different developmental trajectories. For artifact concepts, the levels at which the greatest gains in knowledge and induction occurred were more varied, and corresponded more closely across tasks. In Experiment 3, adults reported beliefs about within-category similarity for concepts at different levels of animal, plant and artifact hierarchies, and rated inductive strength as before. For living kind concepts, expectations about category coherence predicted patterns of inductions; knowledge did not. For artifact concepts, both knowledge and expectations predicted patterns of induction. Results suggest that beliefs about conceptual coherence play an important role in guiding inductive inference, that this role may be largely independent of specific knowledge of concepts, and that such beliefs are especially important in reasoning about living kinds.

  1. Senescence induction; a possible cancer therapy

    Directory of Open Access Journals (Sweden)

    Kondoh Hiroshi

    2009-01-01

    Full Text Available Abstract Cellular immortalization is a crucial step during the development of human cancer. Primary mammalian cells reach replicative exhaustion after several passages in vitro, a process called replicative senescence. During such a state of permanent growth arrest, senescent cells are refractory to physiological proliferation stimuli: they have altered cell morphology and gene expression patterns, although they remain viable with preserved metabolic activity. Interestingly, senescent cells have also been detected in vivo in human tumors, particularly in benign lesions. Senescence is a mechanism that limits cellular lifespan and constitutes a barrier against cellular immortalization. During immortalization, cells acquire genetic alterations that override senescence. Tumor suppressor genes and oncogenes are closely involved in senescence, as their knockdown and ectopic expression confer immortality and senescence induction, respectively. By using high throughput genetic screening to search for genes involved in senescence, several candidate oncogenes and putative tumor suppressor genes have been recently isolated, including subtypes of micro-RNAs. These findings offer new perspectives in the modulation of senescence and open new approaches for cancer therapy.

  2. Massless particles, electromagnetism, and Rieffel induction

    Energy Technology Data Exchange (ETDEWEB)

    Landsman, N.P. [ed.] [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik; Wiedemann, U.A. [ed.] [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

    1994-06-01

    The connection between space-time covariant representations (obtained by inducing from the Lorentz group) and irreducible unitary representations (induced from Wigner`s little group) of the Poincare groups is re-examined in the massless case. In the situation relevant to physics, it is found that these are related by Marsden-Weinstein reduction with respect to a gauge group. An analogous phenomenon is observed for classical massless relativistic particles. This symplectic reduction procedure can be (`second`) quantized using a generalization of the Rieffel induction technique in operator algebra theory, which is carried through in detail for electromagnetism. Starting from the so-called Fermi representation of the field algebra generated by the free abelian gauge field, we construct a new (`rigged`) sesquilinear form on the representation space, which is positive semi-definite, and given in terms of a Gaussian weak distribution (promeasure) on the gauge group (taken to be a Hilbert Lie group). This eventually constructs the algebra of observables of quantum electromagnetism (directly in its vacuum representation) as a representation of the so-called algebra of weak observables induced by the trivial representation of the gauge group. (orig.)

  3. Environmental Induction of Polyembryony in Echinoid Echinoderms.

    Science.gov (United States)

    Allen, Jonathan D; Armstrong, Anne Frances; Ziegler, Shelby L

    2015-12-01

    Polyembryony, or the production of multiple offspring from a single zygote, is a widespread phenomenon in the animal kingdom. Various types of polyembryony have been described in arthropods, bryozoans, chordates, cnidarians, echinoderms, and platyhelminthes. We describe the induction of polyembryony in embryos of the sand dollar Echinarachnius parma and the pencil urchin Eucidaris tribuloides in response to elevated temperature and reduced salinity. Data on the environmental variation in temperature and salinity that normally occurs during the spawning season, combined with the range of laboratory conditions over which polyembryony was induced, suggest that polyembryony may occur frequently in these species under natural conditions. We tested an additional two species of echinoids for similar responses, but found little evidence for polyembryony in the green urchin Strongylocentrotus droebachiensis or the variegated urchin Lytechinus variegatus, suggesting that polyembryony is not a universal response of echinoids to fluctuations in temperature and salinity. The unexpected developmental changes that we observed in response to present-day fluctuations in temperature and salinity suggest that ongoing and future environmental shifts may drive substantial changes in marine invertebrate developmental patterns, and that these changes will be different across taxa.

  4. Mechanical methods for induction of labour.

    Science.gov (United States)

    Jozwiak, Marta; Bloemenkamp, Kitty W M; Kelly, Anthony J; Mol, Ben Willem J; Irion, Olivier; Boulvain, Michel

    2012-03-14

    Mechanical methods were the first methods developed to ripen the cervix and induce labour. During recent decades they have been substituted by pharmacological methods. Potential advantages of mechanical methods, compared with pharmacological methods, may include simplicity of preservation, lower cost and reduction of the side effects. To determine the effects of mechanical methods for third trimester cervical ripening or induction of labour in comparison with placebo/no treatment, prostaglandins (vaginal and intracervical prostaglandin E2 (PGE2), misoprostol) and oxytocin. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (30 April 2011) and bibliographies of relevant papers. We updated this search on 16 January 2012 and added the results to the awaiting classification section of the review. Clinical trials comparing mechanical methods used for third trimester cervical ripening or labour induction with methods listed above it on a predefined list of methods of labour. A comparison with amniotomy will be added, should this comparison be made in future trials.Different types of intervention have been considered as mechanical methods: (1) introduction of laminaria tents, or their synthetic equivalent (Dilapan), into the cervical canal; (2) the introduction of a catheter through the cervix into the extra-amniotic space, with or without traction; (3) use of a catheter to inject fluidsin the extra-amniotic spaceIn addition, we made other comparisons: (1) specific mechanical methods (balloon catheter and laminaria tents) compared with any prostaglandins or with oxytocin; (2) addition of prostaglandins or oxytocin to mechanical methods compared with prostaglandins alone. Two review authors independently assessed trials for inclusion and assessed risk of bias. Two review authors independently extracted data. For this update we have included a further 27 studies. The review includes 71 randomised controlled trials (total of 9722 women), ranging from

  5. Induction effects of torus knots and unknots

    Science.gov (United States)

    Oberti, Chiara; Ricca, Renzo L.

    2017-09-01

    Geometric and topological aspects associated with induction effects of field lines in the shape of torus knots/unknots are examined and discussed in detail. Knots are assumed to lie on a mathematical torus of circular cross-section and are parametrized by standard equations. The induced field is computed by direct integration of the Biot-Savart law. Field line patterns of the induced field are obtained and several properties are examined for a large family of knots/unknots up to 51 crossings. The intensity of the induced field at the origin of the reference system (center of the torus) is found to depend linearly on the number of toroidal coils and reaches maximum values near the boundary of the mathematical torus. New analytical estimates and bounds on energy and helicity are established in terms of winding number and minimum crossing number. These results find useful applications in several contexts when the source field is either vorticity, electric current or magnetic field, from vortex dynamics to astrophysics and plasma physics, where highly braided magnetic fields and currents are present.

  6. The gravitational analog of Faraday's induction law

    Science.gov (United States)

    Zile, Daniel; Overduin, James

    2015-04-01

    Michael Faraday, the discoverer of electromagnetic induction, was convinced that there must also be a gravitational analog of this law, and he carried out drop-tower experiments in 1849 to look for the electric current induced in a coil by changes in gravitational flux through the coil. This work, now little remembered, was in some ways the first investigation of what we would now call a unified-field theory. We revisit Faraday's experiments in the light of current knowledge and ask what might be learned if they were to be performed today. We then review the gravitational analog for Faraday's law that arises within the vector (or gravito-electromagnetic) approximation to Einstein's theory of general relativity in the weak-field, low-velocity limit. This law relates spinning masses and induced ``mass currents'' rather than spinning charges and electric currents, but is otherwise remarkably similar to its electromagnetic counterpart. The predicted effects are completely unobservable in everyday settings like those envisioned by Faraday, but are thought to be relevant in astrophysical contexts like the accretion disks around collapsed stars, thus bearing out Faraday's remarkable intuition. Undergraduate student.

  7. Heterochronic bilateral ectopic pregnancy after ovulation induction.

    Science.gov (United States)

    Zhu, Bo; Xu, Gu-feng; Liu, Yi-feng; Qu, Fan; Yao, Wei-miao; Zhu, Yi-min; Gao, Hui-juan; Zhang, Dan

    2014-08-01

    Ectopic pregnancy is identified with the widely-applied assisted reproductive technology (ART). Bilateral ectopic pregnancy is a rare form of ectopic pregnancy which is difficult to be diagnosed at the pre-operation stage. In this paper, we presented an unusual case of heterochronic bilateral ectopic pregnancy after stimulated intrauterine insemination (IUI), where there has been a delay of 22 d between the diagnoses of the two ectopic pregnancies. Literature was reviewed on the occurrence of bilateral ectopic pregnancy during the past four years in the MEDLINE database. We found 16 cases of bilateral ectopic pregnancy reported since 2008, and analyzed the characteristics of those cases of bilateral ectopic pregnancy. We emphasize that ovulation induction and other ARTs may increase the risk of bilateral ectopic pregnancy. Because of the difficulty in identification of bilateral ectopic pregnancy by ultrasonography, the clinician should be aware that the treatment of one ectopic pregnancy does not preclude the occurrence of a second ectopic pregnancy in the same patient and should pay attention to the intra-operation inspection of both side fallopian tubes in any ectopic pregnancy case.

  8. Probing the tumor microenvironment: collection and induction

    Science.gov (United States)

    Williams, James K.; Padgen, Michael R.; Wang, Yarong; Entenberg, David; Gertler, Frank; Condeelis, John S.; Castracane, James

    2012-03-01

    The Nano Intravital Device, or NANIVID, is under development as an optically transparent, implantable tool to study the tumor microenvironment. Two etched glass substrates are sealed using a thin polymer membrane to create a reservoir with a single outlet. This reservoir is loaded with a hydrogel blend that contains growth factors or other chemicals to be delivered to the tumor microenvironment. When the device is implanted in the tumor, the hydrogel will swell and release these entrapped molecules, forming a gradient. Validation of the device has been performed in vitro using epidermal growth factor (EGF) and MenaINV, a highly invasive, rat mammary adenocarcinoma cell line. In both 2-D and 3-D environments, cells migrated toward the gradient of EGF released from the device. The chorioallantoic membrane (CAM) of White Leghorn chicken eggs is being utilized to grow xenograft tumors that will be used for ex vivo cell collection. Device optimization is being performed for in vivo use as a tool to collect the invasive cell population. Preliminary cell collection experiments in vivo were performed using a mouse model of breast cancer. As a second application, the device is being explored as a delivery vehicle for chemicals that induce controlled changes in the tumor microenvironment. H2O2 was loaded in the device and generated intracellular reactive oxygen species (ROS) in cells near the device outlet. In the future, other induction targets will be explored, including hypoglycemia and the manipulation of extracellular matrix stiffness.

  9. University Students' Understanding of Electromagnetic Induction

    Science.gov (United States)

    Guisasola, Jenaro; Almudi, Jose M.; Zuza, Kristina

    2013-11-01

    This study examined engineering and physical science students' understanding of the electromagnetic induction (EMI) phenomena. It is assumed that significant knowledge of the EMI theory is a basic prerequisite when students have to think about electromagnetic phenomena. To analyse students' conceptions, we have taken into account the fact that individuals build mental representations to help them understand how a physical system works. Individuals use these representations to explain reality, depending on the context and the contents involved. Therefore, we have designed a questionnaire with an emphasis on explanations and an interview, so as to analyse students' reasoning. We found that most of the students failed to distinguish between macroscopic levels described in terms of fields and microscopic levels described in terms of the actions of fields. It is concluded that although the questionnaire and interviews involved a limited range of phenomena, the identified explanations fall into three main categories that can provide information for curriculum development by identifying the strengths and weaknesses of students' conceptions.

  10. Induction of homochirality in achiral enantiomorphous monolayers.

    Science.gov (United States)

    Parschau, Manfred; Romer, Sara; Ernst, Karl-Heinz

    2004-12-01

    We report the induction of homochirality in enantiomorphous layers of achiral succinic acid on a Cu(110) surface after doping with tartaric acid (TA) enantiomers. Succinic acid becomes chiral upon adsorption due to symmetry-breaking interactions with the Cu(110) surface. The doubly deprotonated bisuccinate forms mirror domains on the surface, which leads to a superposition of (11,-90) and (90,-11) patterns observed by low-energy electron diffraction (LEED). On average, however, the surface layer is racemic. An amount of 2 mol % of (R,R)- or (S,S)-tartaric acid in the monolayer, corresponding to an absolute coverage of 0.001 tartaric acid molecule per surface copper atom, is sufficient to make the LEED spots of one enantiomorphous lattice disappear. After thermally induced desorption of TA, the succinic acid lattice turns racemic again. In analogy to the "sergeants-and-soldiers" principle described for helical polymers, this effect is explained by a lateral cooperative interaction within the two-dimensional lattice.

  11. A Model of Inductive Bias Learning

    CERN Document Server

    Baxter, J

    2011-01-01

    A major problem in machine learning is that of inductive bias: how to choose a learner's hypothesis space so that it is large enough to contain a solution to the problem being learnt, yet small enough to ensure reliable generalization from reasonably-sized training sets. Typically such bias is supplied by hand through the skill and insights of experts. In this paper a model for automatically learning bias is investigated. The central assumption of the model is that the learner is embedded within an environment of related learning tasks. Within such an environment the learner can sample from multiple tasks, and hence it can search for a hypothesis space that contains good solutions to many of the problems in the environment. Under certain restrictions on the set of all hypothesis spaces available to the learner, we show that a hypothesis space that performs well on a sufficiently large number of training tasks will also perform well when learning novel tasks in the same environment. Explicit bounds are also de...

  12. Hitting the mucosal road in tolerance induction.

    Science.gov (United States)

    Wiedermann, Ursula

    2009-01-01

    Within the last decades a dramatic increase in allergic diseases has been recognized in the Westernized societies, leading to the fact that meanwhile 25-30% of the population is afflicted by allergic disorders. Besides a hereditary disposition, other factors, including a reduced microbial contact early in life or changes in nutrition, might also have influenced this epidemiological development. So far the only causative treatment against type-I allergies is specific immunotherapy. In young and monosensitized patients this treatment is highly efficacious, while there are clear limitations in older or multisensitized patients. Allergy research therefore aims at establishing new and more efficacious treatment strategies in prophylactic as well as therapeutic settings. Our research programs focus on the development of novel allergy vaccines based on the induction of mucosal tolerance. In different mouse models of respiratory allergy mucosal treatment with genetically engineered allergen constructs proved to prevent the development of allergic mono- and multisensitivities. The additional use of mucosal adjuvants seems particularly important to improve therapeutic treatment approaches. Recent studies on the inverse relation of certain parasite infections and the development of allergy prompted us to search for selected parasitic molecules with immunosuppressive properties as potential adjuvant systems for novel allergy vaccines. An overview of our recent studies will be given.

  13. Optical Magnetic Induction Tomography of the Heart

    Science.gov (United States)

    Marmugi, Luca; Renzoni, Ferruccio

    2016-04-01

    Atrial Fibrillation (AF) affects a significant fraction of the ageing population, causing a high level of morbidity and mortality. Despite its significance, the causes of AF are still not uniquely identified. This, combined with the lack of precise diagnostic and guiding tools, makes the clinical treatment of AF sub-optimal. We identify magnetic induction tomography as the most promising technique for the investigation of the causes of fibrillation and for its clinical practice. We therefore propose a novel optical instrument based on optical atomic magnetometers, fulfilling the requirements for diagnostic mapping of the heart’s conductivity. The feasibility of the device is here discussed in view of the final application. Thanks to the potential of atomic magnetometers for miniaturisation and extreme sensitivity at room temperature, a new generation of compact and non-invasive diagnostic instrumentation, with both bedside and intra-operative operation capability, is envisioned. Possible scenarios both in clinical practice and biomedical research are then discussed. The flexibility of the system makes it promising also for application in other fields, such as neurology and oncology.

  14. EpCAM-targeted induction of apoptosis.

    Science.gov (United States)

    Bremer, Edwin; Helfrich, Wijnand

    2008-05-01

    EpCAM is a well-established pancarcinoma-associated target antigen that has been used in a variety of therapeutic approaches. Of particular appeal are those strategies that aim to retarget and locally activate immune effector mechanisms involving apoptosis. Cancer cells typically employ various strategies to evade recognition and elimination by immune effector cells, including low or absent expression of MHCI molecules and active elimination of tumor infiltrating immune cells. In addition, cancer cells show an increased resistance towards endogenous pro-apoptotic stimuli due to aberrancies in their apoptotic machinery. However, compelling evidence indicates that cancer cells are often reliant on these molecular aberrations for continued cell survival. This pivotal role of immune evasion and apoptosis resistance has fueled the quest for therapeutic strategies that can selectively retarget and reactivate immune effector cells or molecules, whereby the balance of cellular fate of cancer cells is selectively tipped towards apoptosis. Here we review and discuss the perspectives for EpCAM-targeted apoptosis induction in cancer by EpCAM-selective bispecific antibodies and TRAIL fusion proteins.

  15. Understanding beginning teacher induction: A contextualized examination of best practice

    Directory of Open Access Journals (Sweden)

    Sean Kearney

    2014-12-01

    Full Text Available The problems that teachers face early in their careers are a major factor in growing rates of attrition among neophyte teachers. According to the Organisation for Economic Co-operation and Development, high rates of attrition, coupled with and aging teacher population in many countries in the developed world, may cause a teacher shortage crisis in coming years. Beginning teacher induction is an imperative process in acculturating teachers to their new careers and helping them overcome the hardships of teaching and the accreditation process. While induction practices have become more common in recent years, there are still no mandated structures for inducting teachers into the profession throughout Australia. This article reviews a number of international induction programs, which have been successful in supporting beginning teachers and curbing attrition rates, to emphasize why many programs are inadequate at meeting the needs of beginning teachers. The review proposes a definition for induction to better understand common misconceptions and highlights best practice induction as a way to retain quality teachers in the profession and help ameliorate conditions for beginning teachers. Finally, recommendations are made, specifically in the Australian context, which could help to improve induction practices to better acculturate neophyte teachers to their profession.

  16. Thrust Stand Measurements of a Conical Inductive Pulsed Plasma Thruster

    Science.gov (United States)

    Hallock, Ashley K.; Polzin, Kurt A.

    2013-01-01

    Inductive Pulsed Plasma Thrusters (iPPT) spacecraft propulsion devices in which electrical energy is capacitively stored and then discharged through an inductive coil. The thruster is electrodeless, with a time-varying current in the coil interacting with a plasma covering the face of the coil to induce a plasma current Propellant is accelerated and expelled at a high exhaust velocity (O(10 -- 100 km/s)) by the Lorentz body force arising from the interaction of the magnetic field and the induced plasma current. While this class of thruster mitigates the life-limiting issues associated with electrode erosion, inductive pulsed plasma thrusters can suffer from both high pulse energy requirements imposed by the voltage demands of inductive propellant ionization, and low propellant utilization efficiencies. While this class of thruster mitigates the life-limiting issues associated with electrode erosion, inductive pulsed plasma thrusters can suffer from both high pulse energy requirements imposed by the voltage demands of inductive propellant ionization, and low propellant utilization efficiencies. A conical coil geometry may offer higher propellant utilization efficiency over that of a at inductive coil, however an increase in propellant utilization may be met with a decrease in axial electromagnetic acceleration, and in turn, a decrease in the total axially-directed kinetic energy imparted to the propellant.

  17. Thrust Stand Measurements of a Conical Pulsed Inductive Plasma Thruster

    Science.gov (United States)

    Hallock, Ashley K.; Polzin, Kurt A.; Emsellem, Gregory D.

    2012-01-01

    Pulsed inductive plasma thrusters [1-3] are spacecraft propulsion devices in which electrical energy is capacitively stored and then discharged through an inductive coil. The thruster is electrodeless, with a time-varying current in the coil interacting with a plasma covering the face of the coil to induce a plasma current. Propellant is accelerated and expelled at a high exhaust velocity (O(10-100 km/s)) by the Lorentz body force arising from the interaction of the magnetic field and the induced plasma current. While this class of thruster mitigates the life-limiting issues associated with electrode erosion, pulsed inductive plasma thrusters can su er from both high pulse energy requirements imposed by the voltage demands of inductive propellant ionization, and low propellant utilization efficiencies. The Microwave Assisted Discharge Inductive Plasma Accelerator (MAD-IPA)[4], shown in Fig. 1 is a pulsed inductive plasma thruster that is able to operate at lower pulse energies by partially ionizing propellant with an electron cyclotron resonance (ECR) discharge inside a conical inductive coil whose geometry serves to potentially increase propellant and plasma plume containment relative to at coil geometries. The ECR plasma is created with the use of permanent mag- nets arranged to produce a thin resonance region along the inner surface of the coil, restricting plasma formation and, in turn, current sheet formation to areas of high magnetic coupling to the driving coil.

  18. Induction of Labor Using Misoprostol With or Without Mifepristone in Intrauterine Deat

    Directory of Open Access Journals (Sweden)

    Ajay Agrawal

    2014-06-01

    Conclusions: Pretreatment with mifepristone before induction of labor following late intrauterine fetal death is an effective and safe regimen. It appears to shorten the duration of induction to onset of labor. Keywords: induction of labor; intrauterine fetal death; mifepristone; misoprostol.

  19. Reproducible and controllable induction voltage adder for scaled beam experiments

    Science.gov (United States)

    Sakai, Yasuo; Nakajima, Mitsuo; Horioka, Kazuhiko

    2016-08-01

    A reproducible and controllable induction adder was developed using solid-state switching devices and Finemet cores for scaled beam compression experiments. A gate controlled MOSFET circuit was developed for the controllable voltage driver. The MOSFET circuit drove the induction adder at low magnetization levels of the cores which enabled us to form reproducible modulation voltages with jitter less than 0.3 ns. Preliminary beam compression experiments indicated that the induction adder can improve the reproducibility of modulation voltages and advance the beam physics experiments.

  20. Reconditioning in synchronous operation with one parallel induction generator

    Directory of Open Access Journals (Sweden)

    Alana da Silva Magalhães

    2016-11-01

    Full Text Available The purpose of this paper is to compare mathematical modeling and practical bench in order to validate the electrical interactions between an induction generator and a synchronous generator. Two generators was connected to a common bus in steady state, subject to non-linear load. The results comparing modeling and bench tests show that the induction generator besides the active power increasing, has a better way for harmonic currents flowing in common bus. It was concluded that the induction generator repowering and attenuates current harmonic components present at the connection point, improving the network voltage profile.

  1. A Microfabricated Transduction Coil for Inductive Deep Brain Stimulation

    Directory of Open Access Journals (Sweden)

    Jie (Jayne WU

    2006-07-01

    Full Text Available "Inductively Coupled Deep Brain Stimulator" describes a chip/system design to inductively couple arbitrary waveforms to electrodes embedded in the brain for deep brain stimulation or other neurostimulation. This approach moves the conventionally implanted signal generator outside the body and provides flexibility in adjusting waveforms to investigate optimum stimulation waveforms. An "inlaid electroplating" process with through-wafer plating is used to reduce microcoil resistance and integrate microstructures and electronics. Utilizing inductive link resonance specific to microcoils, waveforms are selectively transmitted to microcoils, which further produces biphasic waveforms that are suitable for deep brain stimulation.

  2. Fully integrated wireless inductive tongue computer interface for disabled people.

    Science.gov (United States)

    Struijk, Lotte N S Andreasen; Lontis, Eugen Romulus; Bentsen, Bo; Christensen, Henrik Vie; Caltenco, Hector A; Lund, Morten Enemark

    2009-01-01

    This work describes a novel fully integrated inductive tongue computer interface for disabled people. The interface consists of an oral unit placed in the mouth, including inductive sensors, related electronics, a system for wireless transmission and a rechargeable battery. The system is activated using an activation unit placed on the tongue, and incorporates 18 inductive sensors, arranged in both a key area and a mouse-pad area. The system's functionality was demonstrated in a pilot experiment, where a typing rate of up to 70 characters/minute was obtained with an error rate of 3%. Future work will include tests with disabled subjects.

  3. Equivalence Between Squirrel Cage and Sheet Rotor Induction Motor

    Science.gov (United States)

    Dwivedi, Ankita; Singh, S. K.; Srivastava, R. K.

    2016-06-01

    Due to topological changes in dual stator induction motor and high cost of its fabrication, it is convenient to replace the squirrel cage rotor with a composite sheet rotor. For an experimental machine, the inner and outer stator stampings are normally available whereas the procurement of rotor stampings is quite cumbersome and is not always cost effective. In this paper, the equivalence between sheet/solid rotor induction motor and squirrel cage induction motor has been investigated using layer theory of electrical machines, so as to enable one to utilize sheet/solid rotor in dual port experimental machines.

  4. Control of power to an inductively heated part

    Energy Technology Data Exchange (ETDEWEB)

    Adkins, Douglas R. (1620 Adelita Dr. NE., Albuquerque, NM 87112); Frost, Charles A. (1039 Red Oaks Loop NE., Albuquerque, NM 87122); Kahle, Philip M. (528 Longwood Loop NE., Rio Rancho, NM 87124); Kelley, J. Bruce (13200 Blue Corn Maiden Trail NE., Albuquerque, NM 87112); Stanton, Suzanne L. (2805 Palo Alto NE., Albuquerque, NM 87112)

    1997-01-01

    A process for induction hardening a part to a desired depth with an AC signal applied to the part from a closely coupled induction coil includes measuring the voltage of the AC signal at the coil and the current passing through the coil; and controlling the depth of hardening of the part from the measured voltage and current. The control system determines parameters of the part that are functions of applied voltage and current to the induction coil, and uses a neural network to control the application of the AC signal based on the detected functions for each part.

  5. ANN Speed Sensorless Fuzzy Control of DRFOC Induction Motor Drives

    Directory of Open Access Journals (Sweden)

    Mouna BEN HAMED

    2010-12-01

    Full Text Available The aim of this paper is to present a full digital implementation of a sensorless speed direct orientation field controlled induction motor drive. Thanks to their advantages, the fuzzy logic is used to control the Squirrel Cage Induction Motor rotor speed and a neural network is used to reconstruct it. Experimental results for a 1kw induction motor are presented and analyzed using a dSpace system with DS1104 controller board based on digital signal processors (DSP. Obtained results demonstrated that the proposed sensorless control scheme is able to obtain high performances.

  6. Theory-based Bayesian models of inductive learning and reasoning.

    Science.gov (United States)

    Tenenbaum, Joshua B; Griffiths, Thomas L; Kemp, Charles

    2006-07-01

    Inductive inference allows humans to make powerful generalizations from sparse data when learning about word meanings, unobserved properties, causal relationships, and many other aspects of the world. Traditional accounts of induction emphasize either the power of statistical learning, or the importance of strong constraints from structured domain knowledge, intuitive theories or schemas. We argue that both components are necessary to explain the nature, use and acquisition of human knowledge, and we introduce a theory-based Bayesian framework for modeling inductive learning and reasoning as statistical inferences over structured knowledge representations.

  7. Different methods for the induction of labour in outpatient settings

    Science.gov (United States)

    Dowswell, Therese; Kelly, Anthony J; Livio, Stefania; Norman, Jane E; Alfirevic, Zarko

    2014-01-01

    Background Induction of labour is carried out for a variety of indications and using a range of pharmacological, mechanical and other methods. For women at low risk, some methods of induction of labour may be suitable for use in outpatient settings. Objectives To examine pharmacological and mechanical interventions to induce labour in outpatient settings in terms of feasibility, effectiveness, maternal satisfaction, healthcare costs and, where information is available, safety. The review complements existing reviews on labour induction examining effectiveness and safety. Search methods We searched the Cochrane Pregnancy and Childbirth Group’s Trials Register (December 2009) and reference lists of retrieved studies. Selection criteria We included randomised controlled trials examining outpatient cervical ripening or induction of labour with pharmacological agents or mechanical methods. Data collection and analysis Two authors independently extracted data and assessed eligible papers for risk of bias. We checked all data after entry into review manager software. Main results We included 28 studies with 2616 women examining different methods of induction of labour where women received treatment at home or were sent home after initial treatment and monitoring in hospital. Studies examined vaginal and intracervical PGE2, vaginal and oral misoprostol, isosorbide mononitrate, mifepristone, oestrogens, and acupuncture. Overall, the results demonstrate that outpatient induction of labour is feasible and that important adverse events are rare. There was no strong evidence that agents used to induce labour in outpatient settings had an impact (positive or negative) on maternal or neonatal health. There was some evidence that, compared to placebo or no treatment, induction agents reduced the need for further interventions to induce labour, and shortened the interval from intervention to birth. We were unable to pool results on outcomes relating to progress in labour as

  8. Wireless Inductive Power Device Suppresses Blade Vibrations

    Science.gov (United States)

    Morrison, Carlos R.; Provenza, Andrew J.; Choi, Benjamin B.; Bakhle, Milind A.; Min, James B.; Stefko, George L.; Duffy, Kirsten P.; Fougers, Alan J.

    2011-01-01

    Vibration in turbomachinery can cause blade failures and leads to the use of heavier, thicker blades that result in lower aerodynamic efficiency and increased noise. Metal and/or composite fatigue in the blades of jet engines has resulted in blade destruction and loss of lives. Techniques for suppressing low-frequency blade vibration, such as gtuned circuit resistive dissipation of vibratory energy, h or simply "passive damping," can require electronics incorporating coils of unwieldy dimensions and adding unwanted weight to the rotor. Other approaches, using vibration-dampening devices or damping material, could add undesirable weight to the blades or hub, making them less efficient. A wireless inductive power device (WIPD) was designed, fabricated, and developed for use in the NASA Glenn's "Dynamic Spin Rig" (DSR) facility. The DSR is used to simulate the functionality of turbomachinery. The relatively small and lightweight device [10 lb (approx.=4.5 kg)] replaces the existing venerable and bulky slip-ring. The goal is the eventual integration of this technology into actual turbomachinery such as jet engines or electric power generators, wherein the device will facilitate the suppression of potentially destructive vibrations in fan blades. This technology obviates slip rings, which require cooling and can prove unreliable or be problematic over time. The WIPD consists of two parts: a remote element, which is positioned on the rotor and provides up to 100 W of electrical power to thin, lightweight piezoelectric patches strategically placed on/in fan blades; and a stationary base unit that wirelessly communicates with the remote unit. The base unit supplies inductive power, and also acts as an input and output corridor for wireless measurement, and active control command to the remote unit. Efficient engine operation necessitates minimal disturbance to the gas flow across the turbine blades in any effort to moderate blade vibration. This innovation makes it

  9. Approaching the truth in induction motor efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Haataja, J.; Pyrhoenen, J. [Lappeenranta Univ. of Technology (Finland)

    2000-07-01

    The importance of motor efficiency in the motor market is increasing. Therefore the accuracy of the efficiency value given by the manufacturer is significant. The accuracy of the efficiency determination depends on the test method used and the precision of the loss determination by the test method. Determining methods can be grouped into two broad categories: direct measurement methods and indirect methods (loss segregation methods). In the following the effect of different methods in the given motor efficiency has been investigated in more detail. While testing low voltage, polyphase squirrel cage induction motors IEC publication 34-2 allows both a direct and an indirect method to be used, but according to NEMA the IEEE-112 test method B - input-output - with loss segregation is to be used. European manufacturers prefer to use the ''summation of losses'' according to the IEC 34-2. When comparing IEC 34-2 to IEEE 112 it can be noticed that the latter one defines stabilised operating temperatures for the measurements, more accurate measuring instruments and more precise procedures to determine all losses than the IEC 34-2. The IEC 34-2 assumes an operating temperature, assumes a value for stray load loss and permits measurements at any motor operating condition with less accurate instruments. On the other hand the IEC 34-2 tolerances for motor losses are smaller than in the IEEE 112. However, it is important to note that IEEE states that besides the nominal efficiency value also a guaranteed minimum efficiency shall be shown on the nameplate. Depending on the manufacturing tolerances this minimum value can be better than the worst value that the tolerance allows. The test results shown below were measured for a high efficiency 690/400 V, four pole, general purpose 5.5 kW motor using both the IEEE 112 method B and the IEC 34-2 indirect (summation of losses) and direct methods. (orig.)

  10. Performance of an induction coil gun

    Energy Technology Data Exchange (ETDEWEB)

    Shokair, I.R.; Cowan, M.; Kaye, R.J.; Marder, B.M.

    1993-10-01

    Performance of an electromagnetic induction launcher is considered for three types of armatures. These are: Solid, 1-element wound and 16-element wound aluminum ar natures. The one element wound armature has uniform current density throughout. Because of the radial distribution of the current density, the wound armature can withstand field reversal (working against embedded flux in the armature) and still maintain low temperature. Slingshot simulations were performed, for several configurations. Best performance was obtained for a single element wound armature with two field reversals. For a 60 kg projectile, 10.5 cm coil inner radius and 5.5 cm coil build, the velocity after 50 meters of launcher length (670 stages) exceeded 3.5 km/sec with an overall efficiency of about 45%. For the same parameters the solid and 16-element wound armatures reach a velocity of about 3.3 km/sec after 800 stages (60 meters of launcher length) but without field reversal. A velocity of 3.5 km/sec is possible after 60 meters of launcher length with the 16-element wound armature with one field reversal, but the temperature is close to the melting temperature of aluminum. In all simulations with a solid armature, melting of some of the surface material occurs. However, it is shown that most of the melting occurs after contribution has been made to the forward going pressure, that is, melting does not affect the electrical performance of the launcher. The effect of coil firing tune jitter on launcher performance is also considered and is found to be very small for realistic perturbations. For {plus_minus}2 {mu}-secs random jitter, the reduction in the final velocity for a 60 meter launcher with a solid armature is less than 0.1% and the increase in temperature is only 2%. This result holds for all types of armatures.

  11. Determinants of thiopental induction dose requirements.

    Science.gov (United States)

    Avram, M J; Sanghvi, R; Henthorn, T K; Krejcie, T C; Shanks, C A; Fragen, R J; Howard, K A; Kaczynski, D A

    1993-01-01

    Dose requirements for thiopental anesthetic induction have significant age- and gender-related variability. We studied the association of the patient characteristics age, gender, weight, lean body mass, and cardiac output with thiopental requirements. Doses of thiopental, infused at 150 mg/min, required to reach both a clinical end-point and an electroencephalographic (EEG) end-point were determined in 30 males and 30 females, aged 18-83 yr. Univariate least squares linear regression analysis revealed outliers in the relationships of age, weight, lean body mass, and cardiac output to thiopental dose at clinical and EEG endpoints. Differential weighting of data points minimized the effect of outliers in the construction of a robust multiple linear regression model of the relationship between several selected independent variables and the dependent variables thiopental dose at clinical and EEG endpoints. The multiple linear regression model for thiopental dose at the clinical end-point selecting the regressor variables age, weight, and gender (R2 = 0.76) was similar to that for age, lean body mass, and gender (R2 = 0.75). Thiopental dose at the EEG endpoint was better described by models selecting the variables age, weight, and cardiac output (R2 = 0.88) or age, lean body mass, and cardiac output (R2 = 0.87). Although cardiac output varied with age, age always remained a selected variable. Because weight and lean body mass differed with gender, their selection as variables in the model eliminated gender as a selected variable or minimized its importance.

  12. Effect of Inductive Coil Geometry on the Operating Characteristics of an Inductive Pulsed Plasma Thruster

    Science.gov (United States)

    Hallock, Ashley K.; Polzin, Kurt A.; Kimberlin, Adam C.; Perdue, Kevin A.

    2012-01-01

    Operational characteristics of two separate inductive thrusters with conical theta pinch coils of different cone angles are explored through thrust stand measurements and time- integrated, unfiltered photography. Trends in impulse bit measurements indicate that, in the present experimental configuration, the thruster with the inductive coil possessing a smaller cone angle produced larger values of thrust, in apparent contradiction to results of a previous thruster acceleration model. Areas of greater light intensity in photographs of thruster operation are assumed to qualitatively represent locations of increased current density. Light intensity is generally greater in images of the thruster with the smaller cone angle when compared to those of the thruster with the larger half cone angle for the same operating conditions. The intensity generally decreases in both thrusters for decreasing mass flow rate and capacitor voltage. The location of brightest light intensity shifts upstream for decreasing mass flow rate of propellant and downstream for decreasing applied voltage. Recognizing that there typically exists an optimum ratio of applied electric field to gas pressure with respect to breakdown efficiency, this result may indicate that the optimum ratio was not achieved uniformly over the coil face, leading to non-uniform and incomplete current sheet formation in violation of the model assumption of immediate formation where all the injected propellant is contained in a magnetically-impermeable current sheet.

  13. Effect of Inductive Coil Geometry on the Operating Characteristics of a Pulsed Inductive Plasma Accelerator

    Science.gov (United States)

    Hallock, Ashley K.; Polzin, Kurt A.; Kimberlin, Adam C.

    2012-01-01

    Operational characteristics of two separate inductive thrusters with coils of different cone angles are explored through thrust stand measurements and time-integrated, un- filtered photography. Trends in impulse bit measurements indicate that, in the present experimental configuration, the thruster with the inductive coil possessing a smaller cone angle produced larger values of thrust, in apparent contradiction to results of a previous thruster acceleration model. Areas of greater light intensity in photographs of thruster operation are assumed to qualitatively represent locations of increased current density. Light intensity is generally greater in images of the thruster with the smaller cone angle when compared to those of the thruster with the larger half cone angle for the same operating conditions. The intensity generally decreases in both thrusters for decreasing mass ow rate and capacitor voltage. The location of brightest light intensity shifts upstream for decreasing mass ow rate of propellant and downstream for decreasing applied voltage. Recognizing that there typically exists an optimum ratio of applied electric field to gas pressure with respect to breakdown efficiency, this result may indicate that the optimum ratio was not achieved uniformly over the coil face, leading to non-uniform and incomplete current sheet formation in violation of the model assumption of immediate formation where all the injected propellant is contained in a magnetically-impermeable current sheet.

  14. Steady induction effects in geomagnetism. Part 1A: Steady motional induction of geomagnetic chaos

    Science.gov (United States)

    Voorhies, Coerte V.

    1992-01-01

    Geomagnetic effects of magnetic induction by hypothetically steady fluid motion and steady magnetic flux diffusion near the top of Earth's core are investigated using electromagnetic theory, simple magnetic earth models, and numerical experiments with geomagnetic field models. The problem of estimating a steady fluid velocity field near the top of Earth's core which induces the secular variation indicated by broad-scale models of the observed geomagnetic field is examined and solved. In Part 1, the steady surficial core flow estimation problem is solved in the context of the source-free mantle/frozen-flux core model. In the first paper (IA), the theory underlying such estimates is reviewed and some consequences of various kinematic and dynamic flow hypotheses are derived. For a frozen-flux core, fluid downwelling is required to change the mean square normal magnetic flux density averaged over the core-mantle boundary. For surficially geostrophic flow, downwelling implies poleward flow. The solution of the forward steady motional induction problem at the surface of a frozen-flux core is derived and found to be a fine, easily visualized example of deterministic chaos. Geomagnetic effects of statistically steady core surface flow may well dominate secular variation over several decades. Indeed, effects of persistent, if not steady, surficially geostrophic core flow are described which may help explain certain features of the present broad-scale geomagnetic field and perhaps paleomagnetic secular variation.

  15. Artificial Inductance Concept to Compensate Nonlinear Inductance Effects in the Back EMF-Based Sensorless Control Method for PMSM

    DEFF Research Database (Denmark)

    Lu, Kaiyuan; Lei, Xiao; Blaabjerg, Frede

    2013-01-01

    The back EMF-based sensorless control method is very popular for permanent magnet synchronous machines (PMSMs) in the medium- to high-speed operation range due to its simple structure. In this speed range, the accuracy of the estimated position is mainly affected by the inductance, which varies...... on the estimated position error, and gives a deep insight into this problem. It also provides a simple approach to achieve a globally minimized position error. A proper choice of the artificial machine inductance may reduce the maximum position error by 50% without considering the actual inductance variation...

  16. Faraday Induction and the Current Carriers in a Circuit

    CERN Document Server

    Boyer, Timothy H

    2014-01-01

    In this article, it is pointed out that Faraday induction can be treated from an untraditional, particle-based point of view. The electromagnetic fields of Faraday induction can be calculated explicitly from approximate point-charge fields derived from the Li\\'enard-Wiechert expressions or from the Darwin Lagrangian. Thus the electric fields of electrostatics, the magnetic fields of magnetostatics, and the electric fields of Faraday induction can all be regarded as arising from charged particles. Some aspects of electromagnetic induction are explored for a hypothetical circuit consisting of point charges which move frictionlessly in a circular orbit. For a small number of particles in the circuit (or for non-interacting particles), the induced electromagnetic fields depend upon the mass and charge of the current carriers while energy is transferred to the kinetic energy of the particles. However, for an interacting multiparticle circuit, the mutual electromagnetic interactions between the particles dominate t...

  17. Development of Lumped Element Kinetic Inductance Detectors for NIKA

    CERN Document Server

    Roesch, M; Bideaud, A; Boudou, N; Calvo, M; Cruciani, A; Doyle, S; Leduc, H G; Monfardini, A; Swenson, L; Leclercq, S; Mauskopf, P; Schuster, K F

    2012-01-01

    Lumped-element kinetic inductance detectors(LEKIDs) have recently shown considerable promise as direct absorption mm-wavelength detectors for astronomical applications. One major research thrust within the N\\'eel Iram Kids Array (NIKA) collaboration has been to investigate the suitability of these detectors for deployment at the 30-meter IRAM telescope located on Pico Veleta in Spain. Compared to microwave kinetic inductance detectors (MKID), using quarter wavelength resonators, the resonant circuit of a LEKID consists of a discrete inductance and capacitance coupled to a feedline. A high and constant current density distribution in the inductive part of these resonators makes them very sensitive. Due to only one metal layer on a silicon substrate, the fabrication is relatively easy. In order to optimize the LEKIDs for this application, we have recently probed a wide variety of individual resonator and array parameters through simulation and physical testing. This included determining the optimal feed-line co...

  18. Induction of lucid dreams: a systematic review of evidence.

    Science.gov (United States)

    Stumbrys, Tadas; Erlacher, Daniel; Schädlich, Melanie; Schredl, Michael

    2012-09-01

    In lucid dreams the dreamer is aware of dreaming and often able to influence the ongoing dream content. Lucid dreaming is a learnable skill and a variety of techniques is suggested for lucid dreaming induction. This systematic review evaluated the evidence for the effectiveness of induction techniques. A comprehensive literature search was carried out in biomedical databases and specific resources. Thirty-five studies were included in the analysis (11 sleep laboratory and 24 field studies), of which 26 employed cognitive techniques, 11 external stimulation and one drug application. The methodological quality of the included studies was relatively low. None of the induction techniques were verified to induce lucid dreams reliably and consistently, although some of them look promising. On the basis of the reviewed studies, a taxonomy of lucid dream induction methods is presented. Several methodological issues are discussed and further directions for future studies are proposed. Copyright © 2012 Elsevier Inc. All rights reserved.

  19. VIBROCASTING CRUCIBLES OF DIFFERENT COMPOSITION FOR FRYING INDUCTION MELTING ALLOYS

    Directory of Open Access Journals (Sweden)

    V. V. Primachenko

    2012-01-01

    Full Text Available It is shown that PSC «UKRNIIO them. A.S.Berezhnogo  has developed technologies for a wide range of induction melting temperature alloys and started commercial production of crucibles of different composition.

  20. Inductive voltage adder (IVA) for submillimeter radius electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Mazarakis, M.G.; Poukey, J.W.; Maenchen, J.E. [and others

    1996-12-31

    The authors have already demonstrated the utility of inductive voltage adder accelerators for production of small-size electron beams. In this approach, the inductive voltage adder drives a magnetically immersed foilless diode to produce high-energy (10--20 MeV), high-brightness pencil electron beams. This concept was first demonstrated with the successful experiments which converted the linear induction accelerator RADLAC II into an IVA fitted with a small 1-cm radius cathode magnetically immersed foilless diode (RADLAC II/SMILE). They present here first validations of extending this idea to mm-scale electron beams using the SABRE and HERMES-III inductive voltage adders as test beds. The SABRE experiments are already completed and have produced 30-kA, 9-MeV electron beams with envelope diameter of 1.5-mm FWHM. The HERMES-III experiments are currently underway.