WorldWideScience

Sample records for hybrids chemically bonded

  1. Hybrid density functional study on lattice vibration, thermodynamic properties, and chemical bonding of plutonium monocarbide

    Science.gov (United States)

    Rong, Yang; Bin, Tang; Tao, Gao; BingYun, Ao

    2016-06-01

    Hybrid density functional theory is employed to systematically investigate the structural, magnetic, vibrational, thermodynamic properties of plutonium monocarbide (PuC and PuC0.75). For comparison, the results obtained by DFT, DFT + U are also given. For PuC and PuC0.75, Fock-0.25 hybrid functional gives the best lattice constants and predicts the correct ground states of antiferromagnetic (AFM) structure. The calculated phonon spectra suggest that PuC and PuC0.75 are dynamically stable. Values of the Helmholtz free energy ΔF, internal energy ΔE, entropy S, and constant-volume specific heat C v of PuC and PuC0.75 are given. The results are in good agreement with available experimental or theoretical data. As for the chemical bonding nature, the difference charge densities, the partial densities of states and the Bader charge analysis suggest that the Pu-C bonds of PuC and PuC0.75 have a mixture of covalent character and ionic character. The effect of carbon vacancy on the chemical bonding is also discussed in detail. We expect that our study can provide some useful reference for further experimental research on the phonon density of states, thermodynamic properties of the plutonium monocarbide. Project supported by the National Natural Science Foundation of China (Grant Nos. 21371160 and 21401173).

  2. Chemically bonded phosphorus/graphene hybrid as a high performance anode for sodium-ion batteries.

    Science.gov (United States)

    Song, Jiangxuan; Yu, Zhaoxin; Gordin, Mikhail L; Hu, Shi; Yi, Ran; Tang, Duihai; Walter, Timothy; Regula, Michael; Choi, Daiwon; Li, Xiaolin; Manivannan, Ayyakkannu; Wang, Donghai

    2014-11-12

    Room temperature sodium-ion batteries are of great interest for high-energy-density energy storage systems because of low-cost and natural abundance of sodium. Here, we report a novel phosphorus/graphene nanosheet hybrid as a high performance anode for sodium-ion batteries through facile ball milling of red phosphorus and graphene stacks. The graphene stacks are mechanically exfoliated to nanosheets that chemically bond with the surfaces of phosphorus particles. This chemical bonding can facilitate robust and intimate contact between phosphorus and graphene nanosheets, and the graphene at the particle surfaces can help maintain electrical contact and stabilize the solid electrolyte interphase upon the large volume change of phosphorus during cycling. As a result, the phosphorus/graphene nanosheet hybrid nanostructured anode delivers a high reversible capacity of 2077 mAh/g with excellent cycling stability (1700 mAh/g after 60 cycles) and high Coulombic efficiency (>98%). This simple synthesis approach and unique nanostructure can potentially be applied to other phosphorus-based alloy anode materials for sodium-ion batteries.

  3. Chemically bonded hybrid systems from functionalized hydroxypyridine molecular bridge: characterization and photophysical properties.

    Science.gov (United States)

    Yan, Bing; Qian, Kai

    2009-01-01

    A series of novel photoactive hybrid materials with organic parts covalently linked to inorganic parts via the acylamino group have been assembled by sol-gel process. The organic parts as molecular bridge derive from alpha-hydroxypyridine (HP) functionalized by 3-(triethoxysilyl)-propyl isocyanate (TESPIC). Finally homogeneous, molecular-based hybrid materials with different microstructure (uniform spherical or clubbed) are obtained, in which no phase separation is observed. This may be ascribed as the different coordination behavior of metal ions (Eu3+ (Tb3+) or Zn2+). Red emission of Eu-HP-Si, green emission of Tb-HP-Si and violet-blue luminescence of Zn-HP-Si hybrids can be achieved within these molecular-based hybrid materials. Besides, both Eu(Tb) and Zn are introduced into the same hybrid systems (Eu(Zn)-HP-Si or Tb(Zn)-HP-Si) through the covalent Si-O bond, whose sphere particle size can be modified. Especially the photoluminescence behavior can be enhanced, suggesting that intramolecular energy transfer takes place between inert Zn2+ and Eu3+ (Tb3+) in the covalently bonded hybrid systems.

  4. Chemical bond fundamental aspects of chemical bonding

    CERN Document Server

    Frenking, Gernot

    2014-01-01

    This is the perfect complement to ""Chemical Bonding - Across the Periodic Table"" by the same editors, who are two of the top scientists working on this topic, each with extensive experience and important connections within the community. The resulting book is a unique overview of the different approaches used for describing a chemical bond, including molecular-orbital based, valence-bond based, ELF, AIM and density-functional based methods. It takes into account the many developments that have taken place in the field over the past few decades due to the rapid advances in quantum chemica

  5. Sandwiched Thin-Film Anode of Chemically Bonded Black Phosphorus/Graphene Hybrid for Lithium-Ion Battery.

    Science.gov (United States)

    Liu, Hanwen; Zou, Yuqin; Tao, Li; Ma, Zhaoling; Liu, Dongdong; Zhou, Peng; Liu, Hongbo; Wang, Shuangyin

    2017-09-01

    A facile vacuum filtration method is applied for the first time to construct sandwich-structure anode. Two layers of graphene stacks sandwich a composite of black phosphorus (BP), which not only protect BP from quickly degenerating but also serve as current collector instead of copper foil. The BP composite, reduced graphene oxide coated on BP via chemical bonding, is simply synthesized by solvothermal reaction at 140 °C. The sandwiched film anode used for lithium-ion battery exhibits reversible capacities of 1401 mAh g(-1) during the 200th cycle at current density of 100 mA g(-1) indicating superior cycle performance. Besides, this facile vacuum filtration method may also be available for other anode material with well dispersion in N-methyl pyrrolidone (NMP). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Destination bonding: Hybrid cognition using Instagram

    Directory of Open Access Journals (Sweden)

    Arup Kumar Baksi

    2015-01-01

    Full Text Available Empirical research has identified the phenomenon of destination bonding as a result of summated physical and emotional values associated with the destination. Physical values, namely natural landscape & other physical settings and emotional values, namely the enculturation processes, have a significant role to play in portraying visitors’ cognitive framework for destination preference. The physical values seemed to be the stimulator for bonding that embodies action or behavior tendencies in imagery. The emotional values were the conditions that lead to affective bonding and are reflected in attitudes for a place which were evident in text narratives. Social networking on virtual platforms offers the scope for hybrid cognitive expression using imagery and text to the visitors. Instagram has emerged as an application-window to capture these hybrid cognitions of visitors. This study focuses on assessing the relationship between hybrid cognition of visitors expressed via Instagram and their bond with the destination. Further to this, the study attempts to examine the impact of hybrid cognition of visitors on the behavioral pattern of prospective visitors to the destination. The study revealed that sharing of visual imageries and related text by the visitors is an expression of the physico-emotional bonding with the destination. It was further established that hybrid cognition strongly asserts destination bonding and has been also found to have moderating impact on the link between destination bonding and electronic-word-of-mouth.

  7. Density Functionals of Chemical Bonding

    Directory of Open Access Journals (Sweden)

    Mihai V. Putz

    2008-06-01

    Full Text Available The behavior of electrons in general many-electronic systems throughout the density functionals of energy is reviewed. The basic physico-chemical concepts of density functional theory are employed to highlight the energy role in chemical structure while its extended influence in electronic localization function helps in chemical bonding understanding. In this context the energy functionals accompanied by electronic localization functions may provide a comprehensive description of the global-local levels electronic structures in general and of chemical bonds in special. Becke-Edgecombe and author’s Markovian electronic localization functions are discussed at atomic, molecular and solid state levels. Then, the analytical survey of the main workable kinetic, exchange, and correlation density functionals within local and gradient density approximations is undertaken. The hierarchy of various energy functionals is formulated by employing both the parabolic and statistical correlation degree of them with the electronegativity and chemical hardness indices by means of quantitative structure-property relationship (QSPR analysis for basic atomic and molecular systems.

  8. Benchmarking Density Functionals for Chemical Bonds of Gold

    DEFF Research Database (Denmark)

    Kepp, Kasper Planeta

    2017-01-01

    Gold plays a major role in nanochemistry, catalysis, and electrochemistry. Accordingly, hundreds of studies apply density functionals to study chemical bonding with gold, yet there is no systematic attempt to assess the accuracy of these methods applied to gold. This paper reports a benchmark...... against 51 experimental bond enthalpies of AuX systems and seven additional polyatomic and cationic molecules. Twelve density functionals were tested, covering meta functionals, hybrids with variable HF exchange, double-hybrid, dispersion-corrected, and nonhybrid GGA functionals. The defined benchmark...... bonds between gold and noble gases. Zero-point vibrational corrections are relatively small for Au-X bonds, ∼ 11-12 kJ/mol except for Au-H bonds. Dispersion typically provides ∼5 kJ/mol of the total bond enthalpy but grows with system size and is 10 kJ/mol for AuXe and AuKr. HF exchange and LYP...

  9. Valence-Bond Theory and Chemical Structure.

    Science.gov (United States)

    Klein, Douglas J.; Trinajstic, Nenad

    1990-01-01

    Discussed is the importance of valence bond theory on the quantum-mechanical theory of chemical structure and the nature of the chemical bond. Described briefly are early VB theory, development of VB theory, modern versions, solid-state applications, models, treatment in textbooks, and flaws in criticisms of valence bond theory. (KR)

  10. The chemical bond in inorganic chemistry the bond valence model

    CERN Document Server

    Brown, I David

    2016-01-01

    The bond valence model is a version of the ionic model in which the chemical constraints are expressed in terms of localized chemical bonds formed by the valence charge of the atoms. Theorems derived from the properties of the electrostatic flux predict the rules obeyed by both ionic and covalent bonds. They make quantitative predictions of coordination number, crystal structure, bond lengths and bond angles. Bond stability depends on the matching of the bonding strengths of the atoms, while the conflicting requirements of chemistry and space lead to the structural instabilities responsible for the unusual physical properties displayed by some materials. The model has applications in many fields ranging from mineralogy to molecular biology.

  11. Binary and Ternary Heterometallic (La3+, Gd3+, Y3+–Eu3+ Functionalized SBA-15 Mesoporous Hybrids: Chemically Bonded Assembly and Photoluminescence

    Directory of Open Access Journals (Sweden)

    Yan Bing

    2010-01-01

    Full Text Available Abstract A novel kind of organic–inorganic monomer SUASi has been achieved by modifying 5-sulfosalicylic acid (SUA with 3-aminopropyltrimethoxysilane (APS, subsequently binary and ternary Eu3+ mesoporous hybrid materials with 5-sulfosalicylic acid (SUA-functionalized SBA-15 and 1,10-phenanthroline (phen are synthesized by co-condensation of SUASi and TEOS in the presence of Eu3+ complex and Pluronic P123 as a template. Finally, luminescent hybrid mesoporous materials consisting of active rare earth ions (Eu3+—inert rare earth ions (Y3+, La3+, Gd3+ complex covalently bonded to the mesoporous materials network have been obtained via this sol–gel approach. The physical characterization and photoluminescence of all these resulting materials are studied in detail. Especially the luminescent behavior has been studied with the different ratios of Eu3+–(Y3+, La3+, Gd3+, which suggests that the existence of inert rare earth ions can enhance the luminescence intensity of Eu3+. This may be due to the intramolecular energy transfer between Y3+, La3+, Gd3+, and Eu3+ through the covalently bonded mesoporous framework.

  12. Coulombic Models in Chemical Bonding.

    Science.gov (United States)

    Sacks, Lawrence J.

    1986-01-01

    Compares the coulumbic point charge model for hydrogen chloride with the valence bond model. It is not possible to assign either a nonpolar or ionic canonical form of the valence bond model, while the covalent-ionic bond distribution does conform to the point charge model. (JM)

  13. Graphene composites containing chemically bonded metal oxides

    Indian Academy of Sciences (India)

    K Pramoda; S Suresh; H S S Ramakrishna Matte; A Govindaraj

    2013-08-01

    Composites of graphene involving chemically bonded nano films of metal oxides have been prepared by reacting graphene containing surface oxygen functionalities with metal halide vapours followed by exposure to water vapour. The composites have been characterized by electron microscopy, atomic force microscopy and other techniques. Magnetite particles chemically bonded to graphene dispersible in various solvents have been prepared and they exhibit fairly high magnetization.

  14. Anodic bonding using a hybrid electrode with a two-step bonding process

    Science.gov (United States)

    Wei, Luo; Jing, Xie; Yang, Zhang; Chaobo, Li; Yang, Xia

    2012-06-01

    A two-step bonding process using a novel hybrid electrode is presented. The effects of different electrodes on bonding time, bond strength and the bonded interface are analyzed. The anodic bonding is studied using a domestic bonding system, which carries out a detailed analysis of the integrity of the bonded interface and the bond strength measurement. With the aid of the hybrid electrode, a bubble-free anodic bonding process could be accomplished within 15-20 min, with a shear strength in excess of 10 MPa. These results show that the proposed method has a high degree of application value, including in most wafer-level MEMS packaging.

  15. The correlation theory of the chemical bond

    CERN Document Server

    Szalay, Szilárd; Szilvási, Tibor; Veis, Libor; Legeza, Örs

    2016-01-01

    The notion of chemical bond is a very useful concept in chemistry. It originated at the beginning of chemistry, it is expressive for the classically thinking mind, and the errors arising from the approximative nature of the concept can often be ignored. In the first half of the twentieth century, however, we learned that the proper description of the microworld is given by quantum mechanics. Quantum mechanics gives more accurate results for chemical systems than any preceding model, however, it is very inexpressive for the classically thinking mind. The quantum mechanical description of the chemical bond is given in terms of delocalized bonding orbitals, or, alternatively, in terms of correlations of occupations of localized orbitals. However, in the latter case, multiorbital correlations were treated only in terms of two-orbital correlations, although the structure of multiorbital correlations is far richer; and, in the case of bonds established by more than two electrons, multiorbital correlations represent...

  16. Hydrogen Bonding and Stability of Hybrid Organic-Inorganic Perovskites

    KAUST Repository

    El-Mellouhi, Fedwa

    2016-09-08

    In the past few years, the efficiency of solar cells based on hybrid organic–inorganic perovskites has exceeded the level needed for commercialization. However, existing perovskites solar cells (PSCs) suffer from several intrinsic instabilities, which prevent them from reaching industrial maturity, and stabilizing PSCs has become a critically important problem. Here we propose to stabilize PSCs chemically by strengthening the interactions between the organic cation and inorganic anion of the perovskite framework. In particular, we show that replacing the methylammonium cation with alternative protonated cations allows an increase in the stability of the perovskite by forming strong hydrogen bonds with the halide anions. This interaction also provides opportunities for tuning the electronic states near the bandgap. These mechanisms should have a universal character in different hybrid organic–inorganic framework materials that are widely used.

  17. Magnetic Properties and Intergranular Action in Bonded Hybrid Magnets

    Institute of Scientific and Technical Information of China (English)

    Hua Zhenghe; Li Shandong; Han Zhida; Wang Dunhui; Zhong Wei; Gu Benxi; Lu Mu; Zhang Jianrong; Du Youwei

    2007-01-01

    Magnetic properties and intergranular action in bonded hybrid magnets, based on NdFeB and strontium ferrite powders were investigated. The long-range magnetostatic interaction and short-range exchange coupling interaction existed simultaneously in bonded hybrid magnets, and neither of them could be neglected. Some magnetic property parameters of hybrid magnets could be approximately obtained by adding the hysteresis loops of two magnets pro rata.

  18. BI-LAYER HYBRID BIOCOMPOSITES: CHEMICAL RESISTANT AND PHYSICAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Mohammad Jawaid,

    2012-02-01

    Full Text Available Bi-layer hybrid biocomposites were fabricated by hand lay-up technique by reinforcing oil palm empty fruit bunch (EFB and jute fibre mats with epoxy matrix. Hybrid composites were prepared by varying the relative weight fraction of the two fibres. The physical (void content, density, dimensional stability, and chemical resistant properties of hybrid composites were evaluated. When the jute fibre loading increased in hybrid composites, physical and chemical resistant properties of hybrid composites were enhanced. Void content of hybrid composites decreased with an increase in jute fibre loading because jute fibres showed better fibre/matrix interface bonding, which leads to a reduction in voids. The density of hybrid composite increased as the quantity of jute fibre loading increased. The hybridization of the jute fibres with EFB composite improved the dimensional stability of the hybrid composites. The performance of hybrid composites towards chemical reagents improved with an increase in jute fibre loading as compared to the EFB composite. The combination of oil palm EFB/jute fibres with epoxy matrix produced hybrid biocomposites material that is competitive to synthetic composites.

  19. Hybrid layer difference between sixth and seventh generation bonding agent

    Directory of Open Access Journals (Sweden)

    Grace Syavira Suryabrata

    2006-03-01

    Full Text Available Since etching is completed at the same stage as priming and bonding, when applying the sixth and seventh generation bonding, the exposed smear layers are constantly surrounded by primer and bonding and cannot collapse. The smear layer and the depth of penetration of resin bonding in dentinal tubules are completely integrated into hybrid layer. The purpose of this laboratory research was to study the penetration depth of two self etching adhesive. Fourteen samples of human extracted teeth were divided into two groups. Each groups consisted of seven samples, each of them was treated with sixth generation bonding agent and the other was treated with seventh generation bonding agent. The results disclosed that the penetration into dentinal tubules of seventh generation bonding agent was deeper than sixth generation bonding agent. Conclusion: bond strength will improve due to the increasing of penetration depth of resin bonding in dentinal tubules.

  20. The chemical bond of stibium. Technological aspects

    Directory of Open Access Journals (Sweden)

    Ashcheulov A. A.

    2011-08-01

    Full Text Available Thin structure of the chemical bond of the hexagonal and rhombohedral modifications of stibium was investigated. The boundaries of their polymorphism were identified, which opens new technological possibilities of creating optical, photoelectric, thermoelectric, and other materials for electronic equipment components.

  1. Bond graph model-based fault diagnosis of hybrid systems

    CERN Document Server

    Borutzky, Wolfgang

    2015-01-01

    This book presents a bond graph model-based approach to fault diagnosis in mechatronic systems appropriately represented by a hybrid model. The book begins by giving a survey of the fundamentals of fault diagnosis and failure prognosis, then recalls state-of-art developments referring to latest publications, and goes on to discuss various bond graph representations of hybrid system models, equations formulation for switched systems, and simulation of their dynamic behavior. The structured text: • focuses on bond graph model-based fault detection and isolation in hybrid systems; • addresses isolation of multiple parametric faults in hybrid systems; • considers system mode identification; • provides a number of elaborated case studies that consider fault scenarios for switched power electronic systems commonly used in a variety of applications; and • indicates that bond graph modelling can also be used for failure prognosis. In order to facilitate the understanding of fault diagnosis and the presented...

  2. Chemical Bonding: The Orthogonal Valence-Bond View

    Directory of Open Access Journals (Sweden)

    Alexander F. Sax

    2015-04-01

    Full Text Available Chemical bonding is the stabilization of a molecular system by charge- and spin-reorganization processes in chemical reactions. These processes are said to be local, because the number of atoms involved is very small. With multi-configurational self-consistent field (MCSCF wave functions, these processes can be calculated, but the local information is hidden by the delocalized molecular orbitals (MO used to construct the wave functions. The transformation of such wave functions into valence bond (VB wave functions, which are based on localized orbitals, reveals the hidden information; this transformation is called a VB reading of MCSCF wave functions. The two-electron VB wave functions describing the Lewis electron pair that connects two atoms are frequently called covalent or neutral, suggesting that these wave functions describe an electronic situation where two electrons are never located at the same atom; such electronic situations and the wave functions describing them are called ionic. When the distance between two atoms decreases, however, every covalent VB wave function composed of non-orthogonal atomic orbitals changes its character from neutral to ionic. However, this change in the character of conventional VB wave functions is hidden by its mathematical form. Orthogonal VB wave functions composed of orthonormalized orbitals never change their character. When localized fragment orbitals are used instead of atomic orbitals, one can decide which local information is revealed and which remains hidden. In this paper, we analyze four chemical reactions by transforming the MCSCF wave functions into orthogonal VB wave functions; we show how the reactions are influenced by changing the atoms involved or by changing their local symmetry. Using orthogonal instead of non-orthogonal orbitals is not just a technical issue; it also changes the interpretation, revealing the properties of wave functions that remain otherwise undetected.

  3. The chemical bond structure and dynamics

    CERN Document Server

    Zewail, Ahmed

    1992-01-01

    This inspired book by some of the most influential scientists of our time--including six Nobel laureates--chronicles our emerging understanding of the chemical bond through the last nine decades and into the future. From Pauling's early structural work using x-ray and electron diffraction to Zewail's femtosecond lasers that probe molecular dynamics in real time; from Crick's molecular biology to Rich's molecular recognition, this book explores a rich tradition of scientific heritage and accomplishment. The perspectives given by Pauling, Perutz, Rich, Crick, Porter, Polanyi, Herschbach, Zewail,

  4. A Corpuscular Picture of Electrons in Chemical Bond

    CERN Document Server

    Ando, Koji

    2015-01-01

    We introduce a theory of chemical bond with a corpuscular picture of electrons. It employs a minimal set of localized electron wave packets with 'floating and breathing' degrees of freedom and the spin-coupling of non-orthogonal valence-bond theory. It accurately describes chemical bonds in ground and excited states of spin singlet and triplet, in a distinct manner from conventional theories, indicating potential for establishing a dynamical theory of electrons in chemical bonds.

  5. Emphasizing the Significance of Electrostatic Interactions in Chemical Bonding

    Science.gov (United States)

    Venkataraman, Bhawani

    2017-01-01

    This paper describes a pedagogical approach to help students understand chemical bonding by emphasizing the importance of electrostatic interactions between atoms. The approach draws on prior studies that have indicated many misconceptions among students in understanding the nature of the chemical bond and energetics associated with bond formation…

  6. Bonding techniques for hybrid active pixel sensors (HAPS)

    Science.gov (United States)

    Bigas, M.; Cabruja, E.; Lozano, M.

    2007-05-01

    A hybrid active pixel sensor (HAPS) consists of an array of sensing elements which is connected to an electronic read-out unit. The most used way to connect these two different devices is bump bonding. This interconnection technique is very suitable for these systems because it allows a very fine pitch and a high number of I/Os. However, there are other interconnection techniques available such as direct bonding. This paper, as a continuation of a review [M. Lozano, E. Cabruja, A. Collado, J. Santander, M. Ullan, Nucl. Instr. and Meth. A 473 (1-2) (2001) 95-101] published in 2001, presents an update of the different advanced bonding techniques available for manufacturing a hybrid active pixel detector.

  7. Hybrid strategies for nanolithography and chemical patterning

    Science.gov (United States)

    Srinivasan, Charan

    Remarkable technological advances in photolithography have extended patterning to the sub-50-nm regime. However, because photolithography is a top-down approach, it faces substantial technological and economic challenges in maintaining the downward scaling trends of feature sizes below 30 nm. Concurrently, fundamental research on chemical self-assembly has enabled the path to access molecular length scales. The key to the success of photolithography is its inherent economies of scale, which justify the large capital investment for its implementation. In this thesis research, top-down and bottom-up approaches have been combined synergistically, and these hybrid strategies have been employed in applications that do not have the economies of scale found in semiconductor chip manufacturing. The specific instances of techniques developed here include molecular-ruler lithography and a series of nanoscale chemical patterning methods. Molecular-ruler lithography utilizes self-assembled multilayered films as a sidewall spacer on initial photolithographically patterned gold features (parent) to place a second-generation feature (daughter) in precise proximity to the parent. The parent-daughter separation, which is on the nanometer length scale, is defined by the thickness of the molecular-ruler resist. Analogous to protocols followed in industry to evaluate lithographic performance, electrical test-pad structures were designed to interrogate the nanostructures patterned by molecular-ruler nanolithography, failure modes creating electrical shorts were mapped to each lithographic step, and subsequent lithographic optimization was performed to pattern nanoscale devices with excellent electrical performance. The optimized lithographic processes were applied to generate nanoscale devices such as nanowires and thin-film transistors (TFTs). Metallic nanowires were patterned by depositing a tertiary generation material in the nanogap and surrounding micron-scale regions, and then

  8. THE HYBRID COUMPOUNDS AND THE INFLUENCE OF HYDROGEN BONDING

    Directory of Open Access Journals (Sweden)

    F ALLOUCHE

    2014-12-01

    Full Text Available Organic–inorganic hybrid materials have received increasing attention in recent research particularly because of their ability to combine the specific properties of inorganic frameworks and the features of organic molecules, including the formation of weak interactions. These materials have recently attracted further interest due to their attractive potential for application as insulators in the electronics industry. They offer promising opportunities for the development of efficient conductors, ferroelectrics, and semiconductors in a wide range of electronic applications [1,2]. The hybrid compounds are rich in H-bonds and they could be used to this effect because of their potential importance in constructing sophisticated assemblies from discrete ionic or molecular building blocks due to its strength and directionality. In order to enrich the varieties in such kinds of hybrid materials and to investigate the influence of hydrogen bonds on the on the structural features, they have synthesized a new compound, This kind of hydrogen bonding appears in the active sites of several biological systems and is observed in similar previously studied hybrid compounds.

  9. The electronic structure and chemical bonding of vitamin B12

    Science.gov (United States)

    Kurmaev, E. Z.; Moewes, A.; Ouyang, L.; Randaccio, L.; Rulis, P.; Ching, W. Y.; Bach, M.; Neumann, M.

    2003-05-01

    The electronic structure and chemical bonding of vitamin B12 (cyanocobalamin) and B12-derivative (methylcobalamin) are studied by means of X-ray emission (XES) and photoelectron (XPS) spectroscopy. The obtained results are compared with ab initio electronic structure calculations using the orthogonalized linear combination of the atomic orbital method (OLCAO). We show that the chemical bonding in vitamin B12 is characterized by the strong Co-C bond and relatively weak axial Co-N bond. It is further confirmed that the Co-C bond in cyanocobalamin is stronger than that of methylcobalamin resulting in their different biological activity.

  10. Upper Secondary Teachers' Knowledge for Teaching Chemical Bonding Models

    Science.gov (United States)

    Bergqvist, Anna; Drechsler, Michal; Chang Rundgren, Shu-Nu

    2016-01-01

    Researchers have shown a growing interest in science teachers' professional knowledge in recent decades. The article focuses on how chemistry teachers impart chemical bonding, one of the most important topics covered in upper secondary school chemistry courses. Chemical bonding is primarily taught using models, which are key for understanding…

  11. Gradient Bundle Analysis: A Full Topological Approach to Chemical Bonding

    CERN Document Server

    Morgenstern, Amanda

    2016-01-01

    The "chemical bond" is a central concept in molecular sciences, but there is no consensus as to what a bond actually is. Therefore, a variety of bonding models have been developed, each defining the structure of molecules in a different manner with the goal of explaining and predicting chemical properties. This thesis describes the initial development of gradient bundle analysis (GBA), a chemical bonding model that creates a high resolution picture of chemical interactions within the charge density framework. GBA is based on concepts from the quantum theory of atoms in molecules (QTAIM), but uses a more complete picture of the topology and geometry of the electron charge density to understand and predict bonding interactions. Gradient bundles are defined as volumes bounded by zero-flux surfaces (ZFSs) in the gradient of the charge density with well-defined energies. The structure of gradient bundles provides an avenue for detecting the locations of valence electrons, which correspond to reactive regions in a ...

  12. Chemical engineering of Mycobacterium tuberculosis dodecin hybrids.

    Science.gov (United States)

    Vinzenz, Xenia; Grosse, Wolfgang; Linne, Uwe; Meissner, Britta; Essen, Lars-Oliver

    2011-10-21

    The suitability for chemical engineering of the highly symmetrical Mycobacterium tuberculosis dodecin was investigated, its inner cavity providing a large compartment shields introduced compounds from bulk solvent. Hybrids were obtained by S-alkylation of cysteine mutants and characterized by spectroscopic methods, including the crystal structures of wild type and biohybrid dodecins.

  13. Closing in on chemical bonds by opening up relativity theory.

    Science.gov (United States)

    Whitney, Cynthia K

    2008-03-01

    This paper develops a connection between the phenomenology of chemical bonding and the theory of relativity. Empirical correlations between electron numbers in atoms and chemical bond stabilities in molecules are first reviewed and extended. Quantitative chemical bond strengths are then related to ionization potentials in elements. Striking patterns in ionization potentials are revealed when the data are viewed in an element-independent way, where element-specific details are removed via an appropriate scaling law. The scale factor involved is not explained by quantum mechanics; it is revealed only when one goes back further, to the development of Einstein's special relativity theory.

  14. Self-assembly of microcapsules via colloidal bond hybridization and anisotropy.

    Science.gov (United States)

    Evers, Chris H J; Luiken, Jurriaan A; Bolhuis, Peter G; Kegel, Willem K

    2016-06-16

    Particles with directional interactions are promising building blocks for new functional materials and may serve as models for biological structures. Mutually attractive nanoparticles that are deformable owing to flexible surface groups, for example, may spontaneously order themselves into strings, sheets and large vesicles. Furthermore, anisotropic colloids with attractive patches can self-assemble into open lattices and the colloidal equivalents of molecules and micelles. However, model systems that combine mutual attraction, anisotropy and deformability have not yet been realized. Here we synthesize colloidal particles that combine these three characteristics and obtain self-assembled microcapsules. We propose that mutual attraction and deformability induce directional interactions via colloidal bond hybridization. Our particles contain both mutually attractive and repulsive surface groups that are flexible. Analogously to the simplest chemical bond--in which two isotropic orbitals hybridize into the molecular orbital of H2--these flexible groups redistribute on binding. Via colloidal bond hybridization, isotropic spheres self-assemble into planar monolayers, whereas anisotropic snowman-shaped particles self-assemble into hollow monolayer microcapsules. A modest change in the building blocks thus results in much greater complexity of the self-assembled structures. In other words, these relatively simple building blocks self-assemble into markedly more complex structures than do similar particles that are isotropic or non-deformable.

  15. Structure of adsorbed monolayers. The surface chemical bond

    Energy Technology Data Exchange (ETDEWEB)

    Somorjai, G.A.; Bent, B.E.

    1984-06-01

    This paper attempts to provide a summary of what has been learned about the structure of adsorbed monolayers and about the surface chemical bond from molecular surface science. While the surface chemical bond is less well understood than bonding of molecules in the gas phase or in the solid state, our knowledge of its properties is rapidly accumulating. The information obtained also has great impact on many surface science based technologies, including heterogeneous catalysis and electronic devices. It is hoped that much of the information obtained from studies at solid-gas interfaces can be correlated with molecular behavior at solid-liquid interfaces. 31 references, 42 figures, 1 table.

  16. Chemical Bond Calculations of Crystal Growth of KDP and ADP

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A novel method was proposed to calculate the crystal morphology (or growth habit) on the basis of chemical bond analysis. All constituent chemical bonds were distinguished as relevant and independent bonds according to their variations during the crystallization process. By employing the current method, the influence of specific growth conditions on the crystal morphology can be considered in the structure analysis process. The ideal morphologies of both KDP (KH2PO4) and ADP (NH4H2PO4) crystals were calculated and compared with our obtained crystallites at room temperature, which validates the present calculation method very well.

  17. Electronegativity, Bond Energy, and Chemical Reactivity.

    Science.gov (United States)

    Myers, R. Thomas

    1979-01-01

    Discusses the Pauling electronegativity concept which rationalizes several kinds of chemical reactions of covalent substances. Electronegativity differences applied to some reactions are demonstrated. (SA)

  18. The Bondons: The Quantum Particles of the Chemical Bond

    Directory of Open Access Journals (Sweden)

    Mihai V. Putz

    2010-10-01

    Full Text Available By employing the combined Bohmian quantum formalism with the U(1 and SU(2 gauge transformations of the non-relativistic wave-function and the relativistic spinor, within the Schrödinger and Dirac quantum pictures of electron motions, the existence of the chemical field is revealed along the associate bondon particle  characterized by its mass (mΒ, velocity (vΒ, charge (eΒ, and life-time (tΒ. This is quantized either in ground or excited states of the chemical bond in terms of reduced Planck constant ħ, the bond energy Ebond and length Xbond, respectively. The mass-velocity-charge-time quaternion properties of bondons’ particles were used in discussing various paradigmatic types of chemical bond towards assessing their covalent, multiple bonding, metallic and ionic features. The bondonic picture was completed by discussing the relativistic charge and life-time (the actual zitterbewegung problem, i.e., showing that the bondon equals the benchmark electronic charge through moving with almost light velocity. It carries negligible, although non-zero, mass in special bonding conditions and towards observable femtosecond life-time as the bonding length increases in the nanosystems and bonding energy decreases according with the bonding length-energy relationship Ebond[kcal/mol]*Xbond[A]=182019, providing this way the predictive framework in which the particle may be observed. Finally, its role in establishing the virtual states in Raman scattering was also established.

  19. The role of radial nodes of atomic orbitals for chemical bonding and the periodic table.

    Science.gov (United States)

    Kaupp, Martin

    2007-01-15

    The role of radial nodes, or of their absence, in valence orbitals for chemical bonding and periodic trends is discussed from a unified viewpoint. In particular, we emphasize the special role of the absence of a radial node whenever a shell with angular quantum number l is occupied for the first time (lack of "primogenic repulsion"), as with the 1s, 2p, 3d, and 4f shells. Although the consequences of the very compact 2p shell (e.g. good isovalent hybridization, multiple bonding, high electronegativity, lone-pair repulsion, octet rule) are relatively well known, it seems that some of the aspects of the very compact 3d shell in transition-metal chemistry are less well appreciated, e.g., the often weakened and stretched bonds at equilibrium structure, the frequently colored complexes, and the importance of nondynamical electron-correlation effects in bonding. Copyright (c) 2006 Wiley Periodicals, Inc.

  20. sup 1 H NMR studies of a biosynthetic lacto-ganglio hybrid glycosphingolipid: Confirmation of structure, interpretation of anomalous' chemical shifts, and evidence for interresidue amide-amide hydrogen bonding

    Energy Technology Data Exchange (ETDEWEB)

    Levery, S.B.; Harris, D.D.; Hakomori, Senitiroh (Univ. of Washington, Seattle (United States)); Holmes, E.H. (Pacific Northwest Research Foundation, Seattle, WA (United States))

    1992-02-04

    Glycosphinogolipids bearing GlcNAc{beta}1 {yields} 3 and GalNAc{beta}1 {yields} 4 linked to {beta}-Gal of lactosylceramide first isolated from a murine myelogenous leukemia cell line have since been found as normal components of mullet roe and English sole liver. In order to clarify the biosynthetic pathways responsible for its occurrence both as a product of normal tissues and as a possible mammalian cancer-associated antigen, the lacto-ganglio hybrid core structure LcGg{sub 4}Cer was synthesized from Lc{sub 3}Cer using a GalNAc{beta}1 {yields} 4 transferase preparation from English sole liver. A preliminary characterization of the enzyme, which may be identical to the GalNAc T-1 responsible for synthesis of GM{sub 2} ganglioside, is presented. The enzymatically synthesized product was analyzed by 1- and 2-D {sup 1}H NMR spectroscopy, confirming its primary structure as GalNAc{beta}1 {yields} 4-(GlcNAc{beta}1 {yields} 3)Gal{beta}1 {yields} 4Glc{beta}1 {yields} 1Cer. An approximate three-dimensional structure for LcGg{sub 4}Cer is proposed, consistent with all data obtained, which should be useful in discussing the results of {sup 1}H NMR analysis of compounds containing this core tetrasaccharide. The structure is characterized by an unusual arrangement of terminal N-acetylhexosamine residues, resulting in a {pi}-H hydrogen-bonding interaction between their acetamido groups.

  1. Hybrid Combustion-Gasification Chemical Looping

    Energy Technology Data Exchange (ETDEWEB)

    Herbert Andrus; Gregory Burns; John Chiu; Gregory Lijedahl; Peter Stromberg; Paul Thibeault

    2009-01-07

    For the past several years Alstom Power Inc. (Alstom), a leading world-wide power system manufacturer and supplier, has been in the initial stages of developing an entirely new, ultra-clean, low cost, high efficiency power plant for the global power market. This new power plant concept is based on a hybrid combustion-gasification process utilizing high temperature chemical and thermal looping technology The process consists of the oxidation, reduction, carbonation, and calcination of calcium-based compounds, which chemically react with coal, biomass, or opportunity fuels in two chemical loops and one thermal loop. The chemical and thermal looping technology can be alternatively configured as (i) a combustion-based steam power plant with CO{sub 2} capture, (ii) a hybrid combustion-gasification process producing a syngas for gas turbines or fuel cells, or (iii) an integrated hybrid combustion-gasification process producing hydrogen for gas turbines, fuel cells or other hydrogen based applications while also producing a separate stream of CO{sub 2} for use or sequestration. In its most advanced configuration, this new concept offers the promise to become the technology link from today's Rankine cycle steam power plants to tomorrow's advanced energy plants. The objective of this work is to develop and verify the high temperature chemical and thermal looping process concept at a small-scale pilot facility in order to enable AL to design, construct and demonstrate a pre-commercial, prototype version of this advanced system. In support of this objective, Alstom and DOE started a multi-year program, under this contract. Before the contract started, in a preliminary phase (Phase 0) Alstom funded and built the required small-scale pilot facility (Process Development Unit, PDU) at its Power Plant Laboratories in Windsor, Connecticut. Construction was completed in calendar year 2003. The objective for Phase I was to develop the indirect combustion loop with CO{sub 2

  2. Upper Secondary Teachers' Knowledge for Teaching Chemical Bonding Models

    Science.gov (United States)

    Bergqvist, Anna; Drechsler, Michal; Rundgren, Shu-Nu Chang

    2016-01-01

    Researchers have shown a growing interest in science teachers' professional knowledge in recent decades. The article focuses on how chemistry teachers impart chemical bonding, one of the most important topics covered in upper secondary school chemistry courses. Chemical bonding is primarily taught using models, which are key for understanding science. However, many studies have determined that the use of models in science education can contribute to students' difficulties understanding the topic, and that students generally find chemical bonding a challenging topic. The aim of this study is to investigate teachers' knowledge of teaching chemical bonding. The study focuses on three essential components of pedagogical content knowledge (PCK): (1) the students' understanding, (2) representations, and (3) instructional strategies. We analyzed lesson plans about chemical bonding generated by 10 chemistry teachers with whom we also conducted semi-structured interviews about their teaching. Our results revealed that the teachers were generally unaware of how the representations of models they used affected student comprehension. The teachers had trouble specifying students' difficulties in understanding. Moreover, most of the instructional strategies described were generic and insufficient for promoting student understanding. Additionally, the teachers' rationale for choosing a specific representation or activity was seldom directed at addressing students' understanding. Our results indicate that both PCK components require improvement, and suggest that the two components should be connected. Implications for the professional development of pre-service and in-service teachers are discussed.

  3. Self-assembly of microcapsules via colloidal bond hybridization and anisotropy

    Science.gov (United States)

    Evers, Chris H. J.; Luiken, Jurriaan A.; Bolhuis, Peter G.; Kegel, Willem K.

    2016-06-01

    Particles with directional interactions are promising building blocks for new functional materials and may serve as models for biological structures. Mutually attractive nanoparticles that are deformable owing to flexible surface groups, for example, may spontaneously order themselves into strings, sheets and large vesicles. Furthermore, anisotropic colloids with attractive patches can self-assemble into open lattices and the colloidal equivalents of molecules and micelles. However, model systems that combine mutual attraction, anisotropy and deformability have not yet been realized. Here we synthesize colloidal particles that combine these three characteristics and obtain self-assembled microcapsules. We propose that mutual attraction and deformability induce directional interactions via colloidal bond hybridization. Our particles contain both mutually attractive and repulsive surface groups that are flexible. Analogously to the simplest chemical bond—in which two isotropic orbitals hybridize into the molecular orbital of H2—these flexible groups redistribute on binding. Via colloidal bond hybridization, isotropic spheres self-assemble into planar monolayers, whereas anisotropic snowman-shaped particles self-assemble into hollow monolayer microcapsules. A modest change in the building blocks thus results in much greater complexity of the self-assembled structures. In other words, these relatively simple building blocks self-assemble into markedly more complex structures than do similar particles that are isotropic or non-deformable.

  4. Chemical cleaning agents and bonding to glass-fiber posts.

    Science.gov (United States)

    Gonçalves, Ana Paula Rodrigues; Ogliari, Aline de Oliveira; Jardim, Patrícia dos Santos; Moraes, Rafael Ratto de

    2013-01-01

    The influence of chemical cleaning agents on the bond strength between resin cement and glass-fiber posts was investigated. The treatments included 10% hydrofluoric acid, 35% phosphoric acid, 50% hydrogen peroxide, acetone, dichloromethane, ethanol, isopropanol, and tetrahydrofuran. Flat glass-fiber epoxy substrates were exposed to the cleaners for 60 s. Resin cement cylinders were formed on the surfaces and tested in shear. All treatments provided increased bond strength compared to untreated control specimens. All failures were interfacial. Although all agents improved the bond strength, dichloromethane and isopropanol were particularly effective.

  5. Chemical cleaning agents and bonding to glass-fiber posts

    Directory of Open Access Journals (Sweden)

    Ana Paula Rodrigues Gonçalves

    2013-02-01

    Full Text Available The influence of chemical cleaning agents on the bond strength between resin cement and glass-fiber posts was investigated. The treatments included 10% hydrofluoric acid, 35% phosphoric acid, 50% hydrogen peroxide, acetone, dichloromethane, ethanol, isopropanol, and tetrahydrofuran. Flat glass-fiber epoxy substrates were exposed to the cleaners for 60 s. Resin cement cylinders were formed on the surfaces and tested in shear. All treatments provided increased bond strength compared to untreated control specimens. All failures were interfacial. Although all agents improved the bond strength, dichloromethane and isopropanol were particularly effective.

  6. Chemical-text hybrid search engines.

    Science.gov (United States)

    Zhou, Yingyao; Zhou, Bin; Jiang, Shumei; King, Frederick J

    2010-01-01

    As the amount of chemical literature increases, it is critical that researchers be enabled to accurately locate documents related to a particular aspect of a given compound. Existing solutions, based on text and chemical search engines alone, suffer from the inclusion of "false negative" and "false positive" results, and cannot accommodate diverse repertoire of formats currently available for chemical documents. To address these concerns, we developed an approach called Entity-Canonical Keyword Indexing (ECKI), which converts a chemical entity embedded in a data source into its canonical keyword representation prior to being indexed by text search engines. We implemented ECKI using Microsoft Office SharePoint Server Search, and the resultant hybrid search engine not only supported complex mixed chemical and keyword queries but also was applied to both intranet and Internet environments. We envision that the adoption of ECKI will empower researchers to pose more complex search questions that were not readily attainable previously and to obtain answers at much improved speed and accuracy.

  7. Facile synthesis and application of poly(ionic liquid)-bonded silica hybrid materials.

    Science.gov (United States)

    Bi, Wentao; Tian, Minglei; Row, Kyung Ho

    2012-05-07

    Facile methods were developed to prepare hybrid poly(ionic liquid)-bonded silica for a wide range of applications, particularly in analytical chemistry. The hybrid material obtained was evaluated by comparing its adsorption capacity with other conventional separation materials. In addition, the hybrid material has the potential for industrial scale production.

  8. Controllable synthesis, magnetism and solubility enhancement of graphene nanosheets/magnetite hybrid material by covalent bonding.

    Science.gov (United States)

    Zhan, Yingqing; Yang, Xulin; Meng, Fanbin; Wei, Junji; Zhao, Rui; Liu, Xiaobo

    2011-11-01

    Hybrids of Fe(3)O(4) nanoparticles and surface-modified graphene nanosheets (GNs) were synthesized by a two-step process. First, graphene nanosheets were modified by SOCl(2) and 4-aminophenoxyphthalonitrile to introduce nitrile groups on their surface. Second, the nitrile groups of surface-modified graphene nanosheets were reacted with ferric ions on the surface of Fe(3)O(4) with the help of relatively high boiling point solvent ethylene glycol to form a GNs/Fe(3)O(4) hybrid. The covalent attachment of Fe(3)O(4) nanoparticles on the graphene nanosheet surface was confirmed by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectrometer (EDS) and scanning electron microscopy (SEM). TEM and HRTEM observations indicated that the sizes of the nanoparticles and their coverage density on GNs could be easily controlled by changing the concentration of the precursor and the weight ratio to GNs. Magnetic measurements showed that magnetization of the hybrid materials is strongly influenced by the reaction conditions. Chemically bonded by phthalocyanine, the solubility of as-synthesized GNs/Fe(3)O(4) hybrid materials was greatly enhanced, which was believed to have potential for applications in the fields of composites, wastewater treatment and biomaterials.

  9. The genesis of the quantum theory of the chemical bond

    CERN Document Server

    Esposito, S

    2013-01-01

    An historical overview is given of the relevant steps that allowed the genesis of the quantum theory of the chemical bond, starting from the appearance of the new quantum mechanics and following later developments till approximately 1931. General ideas and some important details are discussed concerning molecular spectroscopy, as well as quantum computations for simple molecular systems performed within perturbative and variational approaches, for which the Born-Oppenheimer method provided a quantitative theory accounting for rotational, vibrational and electronic states. The novel concepts introduced by the Heitler-London theory, complemented by those underlying the method of the molecular orbitals, are critically analyzed along with some of their relevant applications. Further improvements in the understanding of the nature of the chemical bond are also considered, including the ideas of one-electron and three-electron bonds introduced by Pauling, as well as the generalizations of the Heitler-London theory ...

  10. Chemical strategies for die/wafer submicron alignment and bonding.

    Energy Technology Data Exchange (ETDEWEB)

    Martin, James Ellis; Baca, Alicia I.; Chu, Dahwey; Rohwer, Lauren Elizabeth Shea

    2010-09-01

    This late-start LDRD explores chemical strategies that will enable sub-micron alignment accuracy of dies and wafers by exploiting the interfacial energies of chemical ligands. We have micropatterned commensurate features, such as 2-d arrays of micron-sized gold lines on the die to be bonded. Each gold line is functionalized with alkanethiol ligands before the die are brought into contact. The ligand interfacial energy is minimized when the lines on the die are brought into registration, due to favorable interactions between the complementary ligand tails. After registration is achieved, standard bonding techniques are used to create precision permanent bonds. We have computed the alignment forces and torque between two surfaces patterned with arrays of lines or square pads to illustrate how best to maximize the tendency to align. We also discuss complex, aperiodic patterns such as rectilinear pad assemblies, concentric circles, and spirals that point the way towards extremely precise alignment.

  11. Characterizing and Representing Student's Conceptual Knowledge of Chemical Bonding

    Science.gov (United States)

    Yayon, Malka; Mamlok-Naaman, Rachel; Fortus, David

    2012-01-01

    Chemical bonding knowledge is fundamental and essential to the understanding of almost every topic in chemistry, but it is very difficult to learn. While many studies have characterized some of the central elements of knowledge of this topic, these elements of knowledge have not been systematically organized. We describe the development and…

  12. Synthesis of hybrid cellulose nanocomposite bonded with dopamine SiO2/TiO2 and its antimicrobial activity

    Science.gov (United States)

    Ramesh, Sivalingam; Kim, Gwang-Hoon; Kim, Jaehwan; Kim, Joo-Hyung

    2015-04-01

    Organic-inorganic hybrid material based cellulose was synthesized by the sol-gel approach. The explosion of activity in this area in the past decade has made tremendous progress in industry or academic both fundamental understanding of sol-gel process and applications of new functionalized hybrid materials. In this present research work, we focused on cellulose-dopamine functionalized SiO2/TiO2 hybrid nanocomposite by sol-gel process. The cellulose-dopamine hybrid nanocomposite was synthesized via γ-aminopropyltriethoxysilane (γ-APTES) coupling agent by in-situ sol-gel process. The chemical structure of cellulose-amine functionalized dopamine bonding to cellulose structure with covalent cross linking hybrids was confirmed by FTIR spectral analysis. The morphological analysis of cellulose-dopamine nanoSiO2/TiO2 hybrid nanocomposite materials was characterized by XRD, SEM and TEM. From this different analysis results indicate that the optical transparency, thermal stability, control morphology of cellulose-dopamine-SiO2/TiO2 hybrid nanocomposite. Furthermore cellulose-dopamine-SiO2/TiO2 hybrid nanocomposite was tested against pathogenic bacteria for antimicrobial activity.

  13. Chemical Bond Analysis of Single Crystal Growth of Magnesium Oxide

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Starting from the crystallographic structure of magnesium oxide (MgO), both the chemical bond model of solids and Pauling's third rule (polyhedral sharing rule) were employed to quantitatively analyze the chemical bonding structure of constituent atoms and single crystal growth. Our analytical results show that MgO single crystals prefer to grow along the direction and the growth rate of the {100} plane is the slowest one. Therefore, the results show that the {100} plane of MgO crystals can be the ultimate morphology face, which is in a good agreement with our previous experimental results. The study indicate that the structure analysis is an effective tool to control the single-crystal growth.

  14. Fast and accurate predictions of covalent bonds in chemical space

    Science.gov (United States)

    Chang, K. Y. Samuel; Fias, Stijn; Ramakrishnan, Raghunathan; von Lilienfeld, O. Anatole

    2016-05-01

    We assess the predictive accuracy of perturbation theory based estimates of changes in covalent bonding due to linear alchemical interpolations among molecules. We have investigated σ bonding to hydrogen, as well as σ and π bonding between main-group elements, occurring in small sets of iso-valence-electronic molecules with elements drawn from second to fourth rows in the p-block of the periodic table. Numerical evidence suggests that first order Taylor expansions of covalent bonding potentials can achieve high accuracy if (i) the alchemical interpolation is vertical (fixed geometry), (ii) it involves elements from the third and fourth rows of the periodic table, and (iii) an optimal reference geometry is used. This leads to near linear changes in the bonding potential, resulting in analytical predictions with chemical accuracy (˜1 kcal/mol). Second order estimates deteriorate the prediction. If initial and final molecules differ not only in composition but also in geometry, all estimates become substantially worse, with second order being slightly more accurate than first order. The independent particle approximation based second order perturbation theory performs poorly when compared to the coupled perturbed or finite difference approach. Taylor series expansions up to fourth order of the potential energy curve of highly symmetric systems indicate a finite radius of convergence, as illustrated for the alchemical stretching of H 2+ . Results are presented for (i) covalent bonds to hydrogen in 12 molecules with 8 valence electrons (CH4, NH3, H2O, HF, SiH4, PH3, H2S, HCl, GeH4, AsH3, H2Se, HBr); (ii) main-group single bonds in 9 molecules with 14 valence electrons (CH3F, CH3Cl, CH3Br, SiH3F, SiH3Cl, SiH3Br, GeH3F, GeH3Cl, GeH3Br); (iii) main-group double bonds in 9 molecules with 12 valence electrons (CH2O, CH2S, CH2Se, SiH2O, SiH2S, SiH2Se, GeH2O, GeH2S, GeH2Se); (iv) main-group triple bonds in 9 molecules with 10 valence electrons (HCN, HCP, HCAs, HSiN, HSi

  15. Hybrid plasma bonding for void-free strong bonded interface of silicon/glass at 200 degrees C.

    Science.gov (United States)

    Howlader, M M R; Kibria, M G; Zhang, F; Kim, M J

    2010-07-15

    A novel hybrid plasma bonding (HPB) that combines sequential plasma activation (reactive ion etching followed by microwave radicals) with anodic bonding has been developed to achieve void-free and strong silicon/glass bonding at low temperature. The interfacial voids were observed at the silicon/glass interface both in the anodic bonding and in the plasma activated anodic bonding, but the voids were completely disappeared in the HPB method at 200 degrees C. The bonding strength of the silicon/glass in the HPB was as high as 30 MPa at 200 degrees C, which was higher than that in the individual treatment of anodic and plasma activated bonding methods. The improved characteristic behavior of the interface in the HPB is attributed to the higher hydrophilicity and smooth surfaces of silicon and glass after sequential plasma activation. These highly reactive and clean surfaces enhance the mobility of alkaline cations from the glass surface across the interface toward the bulk of glass in the HPB. This transportation resulted in a approximately 353 nm thick alkaline depletion layer in the glass and enlarged the amorphous SiO(2) across the interface. The void-free strong bonding is attributed to the clean hydrophilic surfaces and the amorphous SiO(2) layer across the interface. Copyright 2010 Elsevier B.V. All rights reserved.

  16. Agronomic and chemical characteristics of hybrid corn to ensiling

    Directory of Open Access Journals (Sweden)

    Flávia Borges de Assis

    2014-12-01

    Full Text Available Our aim was to evaluate agronomic and chemical characteristics of corn hybrids to ensiling. It were evaluated nine corn hybrids (MX 300, RB 9308, 2B655, XB 6012, GNZ 2500, PL6890, PRE 32D10, PRE 22T10 e AG 1051, with three replicates. The higher fresh matter yield were observed in the hybrids PL6890 and PRE 32D10, while the dry matter yield was observed in the hybrid PRE 32D10 (13.43 t ha-1. The hybrids PRE 32D10 and PRE 22T10 stood out to present higher percent of leaf in relation to whole plant, while the lower percent of stems was found in the hybrids MX 300, 2B655 and XB 6012, however the higher leaves: stems relation was found in XB 6012 (0.49. There was higher CP content in the hybrid PRE 32D10 (9.10% of DM, while the lower NDF (57.78% of DM and cellulose content (24.27% of DM were observed in the hybrid GNZ 2500. The hybrid PL6890 presented higher ADF and lignin contents, the others hybrids had values lower. The lower NDIN content was observed in the hybrid RB 9308, while the lower AIDN content occurred on the hybrid 2B655. The lower buffer capacity was observed in the hybrid 2B655 (0.29. There are some differences on chemical composition among the corn hybrids used in this study, however, it is recommended to use the hybrids MX 300, PL6890 and PRE 32D10 for showing higher dry matter yield, which may reflect in the amortization of silage production costs.

  17. Chemical Reasoning Based on an Invariance Property: Bond and Lone Pair Pictures in Quantum Structural Formulas

    Directory of Open Access Journals (Sweden)

    Joseph Alia

    2010-07-01

    Full Text Available Chemists use one set of orbitals when comparing to a structural formula, hybridized AOs or NBOs for example, and another for reasoning in terms of frontier orbitals, MOs usually. Chemical arguments can frequently be made in terms of energy and/or electron density without the consideration of orbitals at all. All orbital representations, orthogonal or not, within a given function space are related by linear transformation. Chemical arguments based on orbitals are really energy or electron density arguments; orbitals are linked to these observables through the use of operators. The Valency Interaction Formula, VIF, offers a system of chemical reasoning based on the invariance of observables from one orbital representation to another. VIF pictures have been defined as one-electron density and Hamiltonian operators. These pictures are classified in a chemically meaningful way by use of linear transformations applied to them in the form of two pictorial rules and the invariance of the number of doubly, singly, and unoccupied orbitals or bonding, nonbonding, and antibonding orbitals under these transformations. The compatibility of the VIF method with the bond pair – lone pair language of Lewis is demonstrated. Different electron lone pair representations are related by the pictorial rules and have stability understood in terms of Walsh’s rules. Symmetries of conjugated ring systems are related to their electronic state by simple mathematical formulas. Description of lone pairs in conjugated systems is based on the strength and sign of orbital interactions around the ring. Simple models for bonding in copper clusters are tested, and the bonding of O2 to Fe(II in hemoglobin is described. Arguments made are supported by HF, B3LYP, and MP2 computations.

  18. Vitrified chemically bonded phosphate ceramics for immobilization of radioisotopes

    Science.gov (United States)

    Wagh, Arun S.

    2016-04-05

    A method of immobilizing a radioisotope and vitrified chemically bonded phosphate ceramic (CBPC) articles formed by the method are described. The method comprises combining a radioisotope-containing material, MgO, a source of phosphate, and optionally, a reducing agent, in water at a temperature of less than 100.degree. C. to form a slurry; curing the slurry to form a solid intermediate CBPC article comprising the radioisotope therefrom; comminuting the intermediate CBPC article, mixing the comminuted material with glass frits, and heating the mixture at a temperature in the range of about 900 to about 1500.degree. C. to form a vitrified CBPC article comprising the radioisotope immobilized therein.

  19. Majorana, Pauling and the quantum theory of the chemical bond

    CERN Document Server

    Esposito, S

    2013-01-01

    We discuss in detail very little known results obtained by Majorana as early as 1931, regarding the quantum theory of the chemical bond in homopolar molecules, based on the key concept of exchange interaction. After a brief historical overview of the quantum homopolar valence theory, we address the intriguing issues of the formation of the helium molecular ion, He2+, and of the accurate description of the hydrogen molecule, H2. For the first case, the group theory-inspired approach used by Majorana is contrasted with that more known followed by Pauling (and published few months after that of Majorana), while for the second case we focus on his proposal concerning the possible existence of ionic structures in homopolar compounds, just as in the hydrogen molecule. The novelty and relevance of Majorana's results in the modern research on molecular and chemical physics is emphasized as well.

  20. Chemical bonding in TiSb(2) and VSb(2): a quantum chemical and experimental study.

    Science.gov (United States)

    Armbrüster, Marc; Schnelle, Walter; Schwarz, Ulrich; Grin, Yuri

    2007-08-06

    The chemical bonding in the isostructural intermetallic compounds TiSb2 and VSb2, crystallizing in the CuAl2 type, was investigated by means of quantum chemical calculations, particularly the electron localization function (ELF), as well as by Raman spectroscopy, Hall effect and conductivity measurements on oriented single crystals, and high-pressure X-ray powder diffraction. The homogeneity ranges of the compounds were determined by powder X-ray diffraction, WDXS, and DSC measurements. TiSb2 exhibits no significant homogeneity range, while VSb2 shows a small homogeneity range of approximately 0.3 at. %. According to the ELF calculations, the Sb atoms form dumbbells via a two-center two-electron bond, while the T atoms (T = Ti, V) build up chains along the crystallographic c-axis. Both building units are connected by covalent T-Sb-T three-center bonds, thus forming a three-dimensional network. The strength of the bonds involving Sb was determined by fitting a force constant model to the vibrational mode frequencies observed by polarized Raman measurements on oriented single crystals. The resulting bond order of the Sb2 dumbbells is 1, while the strength of the three-center bonds resembles a bond order of 1.5. The weak pressure dependence of the c/a ratio confirms the slightly different bonding picture in TiSb2 compared to that in CuAl2. Electrical transport measurements show the presence of free charge carriers, as well as a metal-like temperature dependence of the electrical resistivity.

  1. Reliability of flip-chip bonded RFID die using anisotropic conductive paste hybrid material

    Institute of Scientific and Technical Information of China (English)

    Jun-Sik LEE; Jun-Ki KIM; Mok-Soon KIM; Namhyun KANG; Jong-Hyun LEE

    2011-01-01

    A reliability of flip-chip bonded die as a function of anisotropic conductive paste (ACP) hybrid materials. bonding conditions, and antenna pattern materials was investigated during the assembly of radio frequency identification(RFID) inlay. The optimization condition for flip-chip bonding was determined from the behavior of bonding strength. Under the optimized condition,the shear strength for the antenna printed with paste-type Ag ink was larger than that for Cu antenna. Furthermore, an identification distance was varied from the antenna materials. Comparing with the Ag antenna pattern, the as-bonded die on Cu antenna showed a larger distance of identification, However, the long-term reliability of inlay using the Cu antenna was decreased significantly as a function of aging time at room temperature because of the bended shape of Cu antenna formed during the flip-chip bonding process.

  2. Optimizing dentin bond durability: strategies to prevent hydrolytic degradation of the hybrid layer

    Science.gov (United States)

    Tjäderhane, Leo; Nascimento, Fabio D.; Breschi, Lorenzo; Mazzoni, Annalisa; Tersariol, Ivarne L.S.; Geraldeli, Saulo; Tezvergil-Mutluay, Arzu; Carrilho, Marcela; Carvalho, Ricardo M.; Tay, Franklin R.; Pashley, David H.

    2014-01-01

    Objectives Endogenous dentin collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins, are responsible for the time-related hydrolysis of collagen matrix of the hybrid layers. As the integrity of the collagen matrix is essential for the preservation of long-term dentin bond strength, inhibition or inactivation of endogenous dentin proteases is necessary for durable resin-bonded composite resin restorations. Methods Dentin contains collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins, which are responsible for the hydrolytic degradation of collagen matrix in the bonded interface. Several tentative approaches to prevent enzyme function either directly or indirectly have been proposed in the literature. Results Chlorhexidine, a general inhibitor of both MMPs and cysteine cathepsins, applied before primer/adhesive application is the most tested method. In general, these experiments have shown that enzyme inhibition is a promising scheme to improve hybrid layer preservation and bond strength durability. Other enzyme inhibitors, e.g. enzyme-inhibiting monomers and antimicrobial compounds, may be considered promising alternatives that would allow more simple clinical application than chlorhexidine. Cross-linking collagen and/or dentin organic matrix-bound enzymes could render hybrid layer organic matrix resistant to degradation, and complete removal of water from the hybrid layer with ethanol wet bonding or biomimetic remineralization should eliminate hydrolysis of both collagen and resin components. Significance Identification of the enzymes responsible for the hydrolysis of hybrid layer collagen and understanding their function has prompted several innovative approaches to retain the hybrid layer integrity and strong dentin bonding. The ultimate goal, prevention of collagen matrix degradation with techniques and commercially available materials that are simple and effective in clinical settings may be achievable in

  3. Onset of Bonding Plasmon Hybridization Preceded by Gap Modes in Dielectric Splitting of Metal Disks

    DEFF Research Database (Denmark)

    Frederiksen, Maj; Bochenkov, Vladimir; Ogaki, Ryosuke;

    2013-01-01

    Dielectric splitting of nanoscale disks was studied experimentally and via finite-difference time-domain (FDTD) simulations through systematic introduction of multiple ultrathin dielectric layers. Tunable, hybridized dark bonding modes were seen with first-order gap modes preceding the appearance...... of bonding dipole−dipole disk modes. The observed bright dipolar mode did not show the energy shift expected from plasmon hybridization but activated dark higher order gap modes. Introducing lateral asymmetry was shown to remodel the field distribution resulting in 3D asymmetry that reoriented the dipole...

  4. Quantum chemical calculations of bond dissociation energies for COOH scission and electronic structure in some acids

    Institute of Scientific and Technical Information of China (English)

    Zeng Hui; Zhao Jun; Xiao Xun

    2013-01-01

    Quantum chemical calculations are performed to investigate the equilibrium C-COOH bond distances and the bond dissociation energies (BDEs) for 15 acids.These compounds are studied by utilizing the hybrid density functional theory (DFT) (B3LYP,B3PW91,B3P86,PBE1PBE) and the complete basis set (CBS-Q) method in conjunction with the 6-31 lG** basis as DFT methods have been found to have low basis sets sensitivity for small and medium molecules in our previous work.Comparisons between the computational results and the experimental values reveal that CBS-Q method,which can produce reasonable BDEs for some systems in our previous work,seems unable to predict accurate BDEs here.However,the B3P86 calculated results accord very well with the experimental values,within an average absolute error of 2.3 kcal/mol.Thus,B3P86 method is suitable for computing the reliable BDEs of C-COOH bond for carboxylic acid compounds.In addition,the energy gaps between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of studied compounds are estimated,based on which the relative thermal stabilities of the studied acids are also discussed.

  5. Tuning plasmonic and chemical enhancement for SERS detection on graphene-based Au hybrids

    Science.gov (United States)

    Liang, Xiu; Liang, Benliang; Pan, Zhenghui; Lang, Xiufeng; Zhang, Yuegang; Wang, Guangsheng; Yin, Penggang; Guo, Lin

    2015-11-01

    Various graphene-based Au nanocomposites have been developed as surface-enhanced Raman scattering (SERS) substrates recently. However, efficient use of SERS has been impeded by the difficulty of tuning SERS enhancement effects induced from chemical and plasmonic enhancement by different preparation methods of graphene. Herein, we developed graphene-based Au hybrids through physical sputtering gold NPs on monolayer graphene prepared by chemical vapor deposition (CVD) as a CVD-G/Au hybrid, as well as graphene oxide-gold (GO/Au) and reduced-graphene oxide (rGO/Au) hybrids prepared using the chemical in situ crystallization growth method. Plasmonic and chemical enhancements were tuned effectively by simple methods in these as-prepared graphene-based Au systems. SERS performances of CVD-G/Au, rGO/Au and GO/Au showed a gradually monotonic increasing tendency of enhancement factors (EFs) for adsorbed Rhodamine 6G (R6G) molecules, which show clear dependence on chemical bonds between graphene and Au, indicating that the chemical enhancement can be steadily controlled by chemical groups in a graphene-based Au hybrid system. Most notably, we demonstrate that the optimized GO/Au was able to detect biomolecules of adenine, which displayed high sensitivity with a detection limit of 10-7 M as well as good reproducibility and uniformity.Various graphene-based Au nanocomposites have been developed as surface-enhanced Raman scattering (SERS) substrates recently. However, efficient use of SERS has been impeded by the difficulty of tuning SERS enhancement effects induced from chemical and plasmonic enhancement by different preparation methods of graphene. Herein, we developed graphene-based Au hybrids through physical sputtering gold NPs on monolayer graphene prepared by chemical vapor deposition (CVD) as a CVD-G/Au hybrid, as well as graphene oxide-gold (GO/Au) and reduced-graphene oxide (rGO/Au) hybrids prepared using the chemical in situ crystallization growth method. Plasmonic

  6. Hybridization quality and bond strength of adhesive systems according to interaction with dentin

    Science.gov (United States)

    Salvio, Luciana Andrea; Hipólito, Vinicius Di; Martins, Adriano Luis; de Goes, Mario Fernando

    2013-01-01

    Objective: To evaluate the hybridization quality and bond strength of adhesives to dentin. Materials and Methods: Ten human molars were ground to expose the dentin and then sectioned in four tooth-quarters. They were randomly divided into 5 groups according to the adhesive used: Two single-step self-etch adhesives – Adper Prompt (ADP) and Xeno III (XE), two two-step self-etching primer systems – Clearfil SE Bond (SE) and Adhe SE (ADSE), and one one-step etch-and-rinse system – Adper Single Bond (SB). Resin composite (Filtek Z250) crown buildups were made on the bonded surfaces and incrementally light-cured for 20 s. The restored tooth-quarters were stored in water at 37°C for 24 h and then sectioned into beams (0.8 mm2 in cross-section). Maximal microtensile bond strength (μ-TBS) was recorded (0.5 mm/min in crosshead speed). The results were submitted to one-way ANOVA and Tukey's test (α = 0.05). Thirty additional teeth were used to investigate the hybridization quality by SEM using silver methenamine or ammoniacal silver nitrate dyes. Results: SE reached significantly higher μ-TBS (P 0.05), and between SB and ADP (P > 0.05); ADSE and XE were significantly higher than SB and ADP (P adhesives with dentin. The hybridization quality was essential to improve the immediate μ-TBS to dentin. PMID:24926212

  7. Concept of chemical bond and aromaticity based on quantum information theory

    CERN Document Server

    Szilvási, T; Legeza, Ö

    2015-01-01

    Quantum information theory (QIT) emerged in physics as standard technique to extract relevant information from quantum systems. It has already contributed to the development of novel fields like quantum computing, quantum cryptography, and quantum complexity. This arises the question what information is stored according to QIT in molecules which are inherently quantum systems as well. Rigorous analysis of the central quantities of QIT on systematic series of molecules offered the introduction of the concept of chemical bond and aromaticity directly from physical principles and notions. We identify covalent bond, donor-acceptor dative bond, multiple bond, charge-shift bond, and aromaticity indicating unified picture of fundamental chemical models from ab initio.

  8. Chemical Bond Parameters in Sr3MRhO6 (M=Rare earth)

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Chemical bond parameters, that is, bond covalency, bond valence, macroscopic linear susceptibility, and oxidation states of elements in Sr3MRhO6 (M=Sm, Eu, Tb, Dy, Ho, Er, Yb) have been calculated. The results indicate that the bond covalency of M-O decreases sharply with the decrease of ionic radius of M3+ from Sm to Yb, while no obvious trend has been found for Rh-O and Sr-O bonds. The global instability index indicates that the crystal structures of Sr3MrhO6 (M = Sm, Eu, Tb, Dy, Ho) have strained bonds.

  9. Method of waste stabilization with dewatered chemically bonded phosphate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Wagh, Arun; Maloney, Martin D.

    2010-06-29

    A method of stabilizing a waste in a chemically bonded phosphate ceramic (CBPC). The method consists of preparing a slurry including the waste, water, an oxide binder, and a phosphate binder. The slurry is then allowed to cure to a solid, hydrated CBPC matrix. Next, bound water within the solid, hydrated CBPC matrix is removed. Typically, the bound water is removed by applying heat to the cured CBPC matrix. Preferably, the quantity of heat applied to the cured CBPC matrix is sufficient to drive off water bound within the hydrated CBPC matrix, but not to volatalize other non-water components of the matrix, such as metals and radioactive components. Typically, a temperature range of between 100.degree. C.-200.degree. C. will be sufficient. In another embodiment of the invention wherein the waste and water have been mixed prior to the preparation of the slurry, a select amount of water may be evaporated from the waste and water mixture prior to preparation of the slurry. Another aspect of the invention is a direct anyhydrous CBPC fabrication method wherein water is removed from the slurry by heating and mixing the slurry while allowing the slurry to cure. Additional aspects of the invention are ceramic matrix waste forms prepared by the methods disclosed above.

  10. Method of waste stabilization with dewatered chemically bonded phosphate ceramics

    Science.gov (United States)

    Wagh, Arun; Maloney, Martin D.

    2010-06-29

    A method of stabilizing a waste in a chemically bonded phosphate ceramic (CBPC). The method consists of preparing a slurry including the waste, water, an oxide binder, and a phosphate binder. The slurry is then allowed to cure to a solid, hydrated CBPC matrix. Next, bound water within the solid, hydrated CBPC matrix is removed. Typically, the bound water is removed by applying heat to the cured CBPC matrix. Preferably, the quantity of heat applied to the cured CBPC matrix is sufficient to drive off water bound within the hydrated CBPC matrix, but not to volatalize other non-water components of the matrix, such as metals and radioactive components. Typically, a temperature range of between 100.degree. C.-200.degree. C. will be sufficient. In another embodiment of the invention wherein the waste and water have been mixed prior to the preparation of the slurry, a select amount of water may be evaporated from the waste and water mixture prior to preparation of the slurry. Another aspect of the invention is a direct anyhydrous CBPC fabrication method wherein water is removed from the slurry by heating and mixing the slurry while allowing the slurry to cure. Additional aspects of the invention are ceramic matrix waste forms prepared by the methods disclosed above.

  11. Does hybridized dentin affect bond strength of self-adhesive resin cement?

    Science.gov (United States)

    do Valle, Accácio-Lins; de Andrade, Gustavo-Henrique-Barbosa; Vidotti, Hugo-Alberto; Só, Marcus-Vinícius-Reis; Pereira, Jefferson-Ricardo

    2016-01-01

    Background Evaluate the influence of different hybridization bonding techniques of a self-adhesive resin cement. Material and Methods 30 human health molars were divided into six groups (n=10). The specimens received three longitudinal sections, allowing insertion of central cuts in PVC matrices. Each group received a different dentin pretreatment according to the manufacturer’s recommendations, except the control group (G1), as follows. G2 - a 3-step total-etch adhesive system (Optibond™ FL, Kerr); G3 - a 3-step total-etch adhesive system (Adper™ Scotchbond™ Multi-Purpose, 3M ESPE); G4 - a 2-step total-etch adhesive system (Adper™ Single Bond 2, 3M ESPE); G5 - a single-step self-etching system (Bond Force, Tokuyama); and G6 - universal bonding system (Single Bond Universal, 3M ESPE). Then, cylinders made of self-adhesive resin cement with polypropylene matrix was cemented in all groups (RelyX U200, 3M ESPE). Bond strength was assessed by submitting the specimens to micro-shear test and was characterized according to the fracture pattern observed through optical microscopy. Results The results were submitted to the Kruskal-Wallis test, which indicated a statistically significant difference between the groups (p=0.04), and Tukey’s multiple comparisons, which indicated a statistically significant difference between G1 and G3 (p<0.05). The microscopic analysis revealed a high prevalence of adhesive failures, followed by mixed fractures, and cohesive failures in the dentin. Conclusions The use of a previous dentin hybridization protocol is able to increase adhesive bonding resistance of self-adhesive resin cement, especially when used Adper™ Scotchbond™ Multi-Purpose system. Key words:Bonding, self-adhesive resin cement, adhesive systems, microshear. PMID:27703609

  12. Intermolecular atom-atom bonds in crystals - a chemical perspective.

    Science.gov (United States)

    Thakur, Tejender S; Dubey, Ritesh; Desiraju, Gautam R

    2015-03-01

    Short atom-atom distances between molecules are almost always indicative of specific intermolecular bonding. These distances may be used to assess the significance of all hydrogen bonds, including the C-H⋯O and even weaker C-H⋯F varieties.

  13. Interfacial micromorphological differences in hybrid layer formation between water- and solvent-based dentin bonding systems.

    Science.gov (United States)

    Gregoire, Geneviève L; Akon, Bernadette A; Millas, Arlette

    2002-06-01

    Many dentin bonding systems of different compositions, and in particular containing different solvents, have been introduced to the market. Their effect on the quality of the interface requires clarification by means of comparative trials. This study investigated micromorphological differences in hybrid layer formation with a variety of commercially available water- or solvent-based dentin bonding products and their recommended compomers. Five bonding systems were used on groups of 10 teeth each as follows: group I, acetone-based system used with 36% phosphoric acid; group II, a different acetone-based system containing nano-sized particles for filler loading and used with a non-rinsing conditioner containing maleic acid; group III, the acetone-based system of group II used with 36% phosphoric acid (the only difference in the treatment for groups II and III was the acid etching system); group IV, a mixed-solvent-based system (water/ethanol) used with 37% phosphoric acid; and group V, a water-based system used with 37% phosphoric acid. Each bonding system was covered with the recommended compomer. Class I occlusal preparations were made in extracted teeth and restored with one of the above systems. Five specimens of each group were studied with optical microscopy after staining. Scanning electron microscopy was used to examine the interface of the bonding system/dentin of the other 5 teeth in each group. The optical microscopy measurements were made with a 10 x 10 reticle. A micron mark with scale was used for the scanning electron microscope. All measurements were made in microm. The following criteria were used to define a good interface: absence of voids between the different parts of the interface, uniformity of the hybrid layer, good opening of the tubuli orifices, and tag adherence to the tubuli walls. Morphological differences were found at the interface depending on dentin treatment and adhesive composition. The acetone-containing systems were associated

  14. An alternative empirical model for the relationship between the bond valence and the thermal expansion rate of chemical bonds.

    Science.gov (United States)

    Sidey, Vasyl

    2015-08-01

    The relationship between the bond valence s and the thermal expansion rate of chemical bonds (dr/dT) has been closely approximated by using the alternative three-parameter empirical model (dr/dT) = (u + vs)(-1/w), where u, v and w are the refinable parameters. Unlike the s-(dr/dT) model developed by Brown et al. [(1997), Acta Cryst. B53, 750-761], this alternative model can be optimized for particular s-(dr/dT) datasets in the least-squares refinement procedure. For routine calculations of the thermal expansion rates of chemical bonds, the alternative model with the parameters u = -63.9, v = 2581.0 and w = 0.647 can be recommended.

  15. AIScore chemically diverse empirical scoring function employing quantum chemical binding energies of hydrogen-bonded complexes.

    Science.gov (United States)

    Raub, Stephan; Steffen, Andreas; Kämper, Andreas; Marian, Christel M

    2008-07-01

    In this work we report on a novel scoring function that is based on the LUDI model and focuses on the prediction of binding affinities. AIScore extends the original FlexX scoring function using a chemically diverse set of hydrogen-bonded interactions derived from extensive quantum chemical ab initio calculations. Furthermore, we introduce an algorithmic extension for the treatment of multifurcated hydrogen bonds (XFurcate). Charged and resonance-assisted hydrogen bond energies and hydrophobic interactions as well as a scaling factor for implicit solvation were fitted to experimental data. To this end, we assembled a set of 101 protein-ligand complexes with known experimental binding affinities. Tightly bound water molecules in the active site were considered to be an integral part of the binding pocket. Compared to the original FlexX scoring function, AIScore significantly improves the prediction of the binding free energies of the complexes in their native crystal structures. In combination with XFurcate, AIScore yields a Pearson correlation coefficient of R P = 0.87 on the training set. In a validation run on the PDBbind test set we achieved an R P value of 0.46 for 799 attractively scored complexes, compared to a value of R P = 0.17 and 739 bound complexes obtained with the FlexX original scoring function. The redocking capability of AIScore, on the other hand, does not fully reach the good performance of the original FlexX scoring function. This finding suggests that AIScore should rather be used for postscoring in combination with the standard FlexX incremental ligand construction scheme.

  16. Nature of the chemical bond and origin of the inverted dipole moment in boron fluoride: a generalized valence bond approach.

    Science.gov (United States)

    Fantuzzi, Felipe; Cardozo, Thiago Messias; Nascimento, Marco Antonio Chaer

    2015-05-28

    The generalized product function energy partitioning (GPF-EP) method has been applied to investigate the nature of the chemical bond and the origin of the inverted dipole moment of the BF molecule. The calculations were carried out with GPF wave functions treating all of the core electrons as a single Hartree-Fock group and the valence electrons at the generalized valence bond perfect-pairing (GVB-PP) or full GVB levels, with the cc-pVTZ basis set. The results show that the chemical structure of both X (1)Σ(+) and a (3)Π states is composed of a single bond. The lower dissociation energy of the excited state is attributed to a stabilizing intraatomic singlet coupling involving the B 2sp-like lobe orbitals after bond dissociation. An increase of electron density on the B atom caused by the reorientation of the boron 2sp-like lobe orbitals is identified as the main responsible effect for the electric dipole inversion in the ground state of BF. Finally, it is shown that π back-bonding from fluorine to boron plays a minor role in the electron density displacement to the bonding region in both states. Moreover, this effect is associated with changes in the quasi-classical component of the electron density only and does not contribute to covalency in either of the states. Therefore, at least for the case of the BF molecule, the term back-bonding is misleading, since it does not contribute to the bond formation.

  17. Effect of solvent content on resin hybridization in wet dentin bonding.

    Science.gov (United States)

    Wang, Yong; Spencer, Paulette; Yao, Xiaomei; Brenda, Bohaty

    2007-09-15

    With wet bonding techniques, the channels between the demineralized dentin collagen fibrils are filled with debris, solvent, and water. Commercial adhesives include solvents such as ethanol or acetone to facilitate resin-infiltration into this wet substrate. Under in vivo conditions, the solvent may be diluted because of repeated exposure of the material to the atmosphere, or concentrated because of separation of the bonding liquids into layers within the bottle. The purpose of this study was to investigate the effect of different concentrations of ethanol (10-50%) on infiltration of the adhesive resin and collagen fibril encapsulation in the adhesive/dentin interface using light microscopy, micro-Raman spectroscopy, and scanning electron microscopy. The results indicated that under wet bonding conditions the hybridization process was highly sensitive to the initial solvent concentration in the adhesive system. The staining and scanning electron microscopy results showed that the quality of the interfacial hybrid layer was poor at the lower (10%) or higher (50%) ethanol content. Micro-Raman analysis indicated that there was a distinct difference in the degree of adhesive penetration among adhesives containing different concentrations of ethanol. Adhesives containing 10 or 50% ethanol did not realize effective penetration; the penetration of the adhesive monomers increased dramatically when the initial ethanol content was 30%. The amount of solvents are essential for achieving effective bonding to dentin. Copyright 2007 Wiley Periodicals, Inc.

  18. Constitutive Hybrid Processes: a Process-Algebraic Semantics for Hybrid Bond Graphs

    NARCIS (Netherlands)

    Cuijpers, P.J.L.; Broenink, J.F.; Mosterman, P.J.

    2008-01-01

    Models of physical systems have to be based on physical principles such as conservation of energy and continuity of power. These principles are inherently enforced by the bond graph modeling formalism. Often, however, physical components may be best modeled as piecewise continuous with discrete mode

  19. Basic investigation about a new joining process called HFDB (Hybrid Friction Diffusion Bonding); Grundlegende Untersuchung ueber ein neues Schweissverfahren namens HFDB (Hybrid Friction Diffusion Bonding)

    Energy Technology Data Exchange (ETDEWEB)

    Roos, Arne

    2010-07-01

    Scientific and technological objectives in the area of joining of materials for the transportation and energy industry have been the motivation for the development of a new joining method. For integral structures in aircraft a joining technology that is capable of joining metals which differ significantly in melting temperature and strength like titanium and aluminium is needed. In composite structures thin aluminium foils should be welded without degrading or destroying the intermediate polymers. Joining at low temperatures without mixing the joining partners is therefore desirable. Most of today's joining methods do not fulfil these requirements. In the course of this thesis a new joining technology named HFDB (Hybrid Friction Diffusion Bonding) has been developed. With this new joining technology the joining of similar and dissimilar materials of varying thicknesses (AA 2024; Al 7075; Al 99,5; 1.4301; Ti6Al4V; AZ31 in 0,1 mm up to 0,7 mm) as well as the manufacturing of a prototype for a heat-exchanger has been investigated. In addition a clamping set-up for the thin sheets has been developed and tested to avoid buckling during joining. Characterisation of the new bonding method has been established by means of metallographic procedures as well as mechanical testing (REM, {mu}CT, Nanoindenter, EDX, peel- and shear tensile tests, optical microscopy). Results of EDX as well as nano-indentation show a metallic joint in Aluminium /Aluminium as well as Aluminium / Titanium joints. A comparison of HFDB and DB results of the mechanical characterisation show comparable peel results at a significant lower heat input and processing time for HFDB. {mu}CT results show no vertical mixing of the materials across the bonding line. Only horizontal movement of the marker material can be observed. A micro structural investigation in combination with an analytical comparison shows a diffusion dominated joining mechanism. Furthermore the energy input and the bonding mechanism

  20. Glutamic Acid Selective Chemical Cleavage of Peptide Bonds.

    Science.gov (United States)

    Nalbone, Joseph M; Lahankar, Neelam; Buissereth, Lyssa; Raj, Monika

    2016-03-04

    Site-specific hydrolysis of peptide bonds at glutamic acid under neutral aqueous conditions is reported. The method relies on the activation of the backbone amide chain at glutamic acid by the formation of a pyroglutamyl (pGlu) imide moiety. This activation increases the susceptibility of a peptide bond toward hydrolysis. The method is highly specific and demonstrates broad substrate scope including cleavage of various bioactive peptides with unnatural amino acid residues, which are unsuitable substrates for enzymatic hydrolysis.

  1. Immobilization of carbon nanotubes on functionalized graphene film grown by chemical vapor deposition and characterization of the hybrid material

    Directory of Open Access Journals (Sweden)

    Prashanta Dhoj Adhikari

    2014-01-01

    Full Text Available We report the surface functionalization of graphene films grown by chemical vapor deposition and fabrication of a hybrid material combining multi-walled carbon nanotubes and graphene (CNT–G. Amine-terminated self-assembled monolayers were prepared on graphene by the UV-modification of oxidized groups introduced onto the film surface. Amine-termination led to effective interaction with functionalized CNTs to assemble a CNT–G hybrid through covalent bonding. Characterization clearly showed no defects of the graphene film after the immobilization reaction with CNT. In addition, the hybrid graphene material revealed a distinctive CNT–G structure and p–n type electrical properties. The introduction of functional groups on the graphene film surface and fabrication of CNT–G hybrids with the present technique could provide an efficient, novel route to device fabrication.

  2. Innovations in bonding to zirconia-based materials. Part II: focusing on chemical interactions

    NARCIS (Netherlands)

    M.N. Aboushelib; H. Mirmohamadi; J.P. Matinlinna; E. Kukk; H.F. Ounsi; Z. Salameh

    2009-01-01

    Objectives: The zirconia-resin bond strength was enhanced using novel engineered zirconia primers in combination with selective infiltration etching as a surface pre-treatment. The aim of this study was to evaluate the effect of artificial aging on the chemical stability of the established bond and

  3. Organic/Inorganic Hybrid Nanostructures for Chemical Plasmonic Sensors

    Science.gov (United States)

    Chang, Sehoon

    2011-12-01

    The work presented in this dissertation suggests novel design of chemical plasmonic sensors which have been developed based on Localized Surface Plasmon Resonance (LSPR), and Surface-enhanced Raman scattering (SERS) phenomena. The goal of the study is to understand the SERS phenomena for 3D hybrid (organic/inorganic) templates and to design of the templates for trace-level detection of selected chemical analytes relevant to liquid explosives and hazardous chemicals. The key design criteria for the development of the SERS templates are utilizing selective polymeric nanocoatings within cylindrical nanopores for promoting selective adsorption of chemical analyte molecules, maximizing specific surface area, and optimizing concentration of hot spots with efficient light interaction inside nanochannels. The organic/inorganic hybrid templates are optimized through a comprehensive understanding of the LSPR properties of the gold nanoparticles, gold nanorods, interaction of light with highly porous alumina template, and the choice of physical and chemical attributes of the selective coating. Furthermore, novel method to assemble silver nanoparticles in 3D as the active SERS-active substrate has been demonstrated by uniform, in situ growth of silver nanoparticles from electroless deposited silver seeds excluding any adhesive polymer layer on template. This approach can be the optimal for SERS sensing applications because it is not necessary to separate the Raman bands of the polyelectrolyte binding layer from those of the desired analyte. The fabrication method is an efficient, simple and fast way to assemble nanoparticles into 3D nanostructures. Addressable Raman markers from silver nanowire crossbars with silver nanoparticles are also introduced and studied. Assembly of silver nanowire crossbar structure is achieved by simple, double-step capillary transfer lithography. The on/off SERS properties can be observed on silver nanowire crossbars with silver nanoparticles

  4. EVALUATION OF CHEMICALLY BONDED PHOSPHATE CERAMICS FOR MERCURY STABILIZATION OF A MIXED SYNTHETIC WASTE

    Science.gov (United States)

    This experimental study was conducted to evaluate the stabilization and encapsulation technique developed by Argonne National Laboratory, called the Chemically Bonded Phosphate Ceramics technology for Hg- and HgCl2-contaminated synthetic waste materials. Leachability ...

  5. Extraordinarily Long 2-Electron - 4-Center (2e-/4c) 2.9-Å Carbon-Carbon Bonds - What is a Chemical Bond?

    OpenAIRE

    Miller, Joel S.

    2014-01-01

    Carbon-carbon (CC) bonding is a key essence of organic and biochemistry. The length of a CC bond, i.e. 1.54 Å found in the diamond allotrope of carbon and ethane, is among the essential information learned by all chemistry students. This is the length of a single bond () between sp3-hybridized carbons and is the longest of all common CC bonds. Our studies of the [TCNE]22- (TCNE = tetracyanoethylene) dimers reveal that 2.89 ± 0.05 Å 2 electron/4 center (2e-/4c) CC bonds are present. Struc...

  6. Hybrid density functional study of the structural, bonding, and electronic properties of bismuth vanadate

    Science.gov (United States)

    Kweon, Kyoung E.; Hwang, Gyeong S.

    2012-10-01

    The structure and property prediction of metal oxides can significantly be improved by incorporating exact Hartree-Fock (HF) exchange into density functional theory (DFT), which is the so-called hybrid DFT. We explored the impact of HF exchange inclusion on the predicted structural, bonding, and electronic properties of bismuth vanadate (BiVO4), with particular attention to the difference between its monoclinic and tetragonal scheelite phases. The applied exchange-correlation (xc) functionals include the gradient corrected Perdew-Burke-Ernzerhof (PBE) and the PBE-HF hybrid functionals with HF exchange amounts of 10%, 25%, and 50%. We find that the PBE-HF25% yields a monoclinic structure in very close agreement with the experimentally determined structure, while the PBE-HF50% tends to overestimate the monoclinic distortion and the PBE/PBE-HF10% can hardly identify a distinct monoclinic configuration at ambient conditions. Electronic structure analysis reveals that the increasing monoclinic distortion with the amount of HF exchange is related to the enhancement of hybridization between Bi 6s-O 2p antibonding states and unoccupied Bi 6p states. The bonding mechanisms and band structures of the monoclinic and tetragonal phases of BiVO4 were also investigated, and we discuss how the predictions are sensitive to the xc functional choice.

  7. Hybrid HVAC systems with chemical dehumidification for supermarket applications

    Energy Technology Data Exchange (ETDEWEB)

    Capozzoli, Alfonso; Mazzei, Pietro; Minichiello, Francesco; Palma, Daniele [DETEC, University of Naples Federico II, P.le Tecchio, 80, 80125 Naples (Italy)

    2006-06-15

    HVAC systems in supermarkets must assure both thermal comfort for occupants and suitable climatic conditions for refrigerated cases, which operate better with low ambient relative humidity (40-45%). Since open display cases substantially reduce sensible load and moderately reduce latent load, ambient sensible/total heat load ratio is less than usual. Thus, if dehumidification is carried out with a traditional cooling coil, over-sizing of the coil and re-heating of the treated air are necessary, with energy and economic waste. To offset these disadvantages, hybrid HVAC systems with chemical dehumidification may be employed. In this paper a case study is presented in which a traditional HVAC system is compared to hybrid systems with chemical dehumidification. Dynamic simulation codes (DOE and DesiCalc{sup (}TM)) and test reference year data (TRY), opportunely elaborated, have been used. Annual operating costs have been estimated and large savings have been obtained with hybrid systems. Considerable reduction of electric energy demand as well as better control of thermal-hygrometric conditions were noted. A simple payback of about 1 year has been obtained. Finally, a virtual retrofitting operation on 30% of the existing HVAC systems in Italian supermarkets has shown significant operating cost savings. [Author].

  8. Quantum-Mechanical Definition of Atoms and Chemical Bonds in Molecules

    Science.gov (United States)

    2015-01-01

    AFRL-RQ-ED-TR-2014-0025 Quantum-Mechanical Definition of Atoms and Chemical Bonds in Molecules P.W. Langhoff J.D. Mills J.A...manufacture, use, or sell any patented invention that may relate to them. Qualified requestors may obtain copies of this report from the Defense...DATES COVERED (From - To) 15 Oct 2013 - 15 Oct 2014 4. TITLE AND SUBTITLE Quantum-Mechanical Definition of Atoms and Chemical Bonds in Molecules

  9. The Chemical Bond and Solid-state Physics

    Science.gov (United States)

    Phillips, James C.

    1970-01-01

    Proposes a new scale of ionicity, with which the ionic character of bonding in crystals can be predicted and measured. This new scale of ionicity has led to improved understanding of such crystalline properties as lattice structure, heats of formation, elastic constants, and nonlinear optical properties. Bibliography. (LC)

  10. Effects of chemical bonding on heat transport across interfaces.

    Science.gov (United States)

    Losego, Mark D; Grady, Martha E; Sottos, Nancy R; Cahill, David G; Braun, Paul V

    2012-04-22

    Interfaces often dictate heat flow in micro- and nanostructured systems. However, despite the growing importance of thermal management in micro- and nanoscale devices, a unified understanding of the atomic-scale structural features contributing to interfacial heat transport does not exist. Herein, we experimentally demonstrate a link between interfacial bonding character and thermal conductance at the atomic level. Our experimental system consists of a gold film transfer-printed to a self-assembled monolayer (SAM) with systematically varied termination chemistries. Using a combination of ultrafast pump-probe techniques (time-domain thermoreflectance, TDTR, and picosecond acoustics) and laser spallation experiments, we independently measure and correlate changes in bonding strength and heat flow at the gold-SAM interface. For example, we experimentally demonstrate that varying the density of covalent bonds within this single bonding layer modulates both interfacial stiffness and interfacial thermal conductance. We believe that this experimental system will enable future quantification of other interfacial phenomena and will be a critical tool to stimulate and validate new theories describing the mechanisms of interfacial heat transport. Ultimately, these findings will impact applications, including thermoelectric energy harvesting, microelectronics cooling, and spatial targeting for hyperthermal therapeutics.

  11. Strongly Interacting Matter at Finite Chemical Potential: Hybrid Model Approach

    Science.gov (United States)

    Srivastava, P. K.; Singh, C. P.

    2013-06-01

    Search for a proper and realistic equation of state (EOS) for strongly interacting matter used in the study of the QCD phase diagram still appears as a challenging problem. Recently, we constructed a hybrid model description for the quark-gluon plasma (QGP) as well as hadron gas (HG) phases where we used an excluded volume model for HG and a thermodynamically consistent quasiparticle model for the QGP phase. The hybrid model suitably describes the recent lattice results of various thermodynamical as well as transport properties of the QCD matter at zero baryon chemical potential (μB). In this paper, we extend our investigations further in obtaining the properties of QCD matter at finite value of μB and compare our results with the most recent results of lattice QCD calculation.

  12. A qualitative study of high school students' pre- and post instructional conceptions in chemical bonding

    Science.gov (United States)

    Wang, Renhong

    This study investigated high school students' understanding of chemical bonding prior to and after formal chemistry instruction. Two sets of clinical interviews were conducted prior to and after formal instructions on the topic of chemical bonding using a teacher-as-researcher protocol. Twenty-two students enrolled in a New York Regents Chemistry course were interviewed. Six students participated in the pilot study and the other sixteen were involved in the full study. Oral and pictorial data from the interviews were collected and analyzed in two parts; first, the students' conceptual understanding of chemical bonding including common themes, ideas and misconceptions were identified; second, profiles of each student were made to determine conceptual changes due to formal instruction. The findings showed that students were not familiar with the basic components and structure of atoms, especially the electrostatic properties of the sub-atomic particles. Inter-particle distance, rather than the electrostatic forces between particles, was believed to be the determining cause of the state of matter of a substance. The role of repulsive and attractive electrostatic forces in chemical bonding was not recognized. Students were unable to accurately describe the underlying scientific concepts for all types of chemical bonding and revealed a number of misconceptions, which were resistant to change by instruction. Specific areas of difficulty included the accurate descriptions of ionic bonding, covalent bonding and hydrogen bonding. Further, almost all the students could not use electrostatic forces to explain three states of water and phase changes and most students were unable to describe the energy that was released or absorbed due to bond formation or breaking. Student difficulties stemmed from a lack of understanding of some of the underlying, fundamental chemistry, such as the basic atomic structure, the particulate nature of mater and the role of electrostatic forces in

  13. Ultrafast cooling by covalently bonded graphene-carbon nanotube hybrid immersed in water

    Science.gov (United States)

    Chen, Jie; Walther, Jens H.; Koumoutsakos, Petros

    2016-11-01

    The increasing power density and the decreasing dimensions of transistors present severe thermal challenges to the design of modern microprocessors. Furthermore, new technologies such as three-dimensional chip-stack architectures require novel cooling solutions for their thermal management. Here, we demonstrate, through transient heat-dissipation simulations, that a covalently bonded graphene-carbon nanotube (G-CNT) hybrid immersed in water is a promising solution for the ultrafast cooling of such high-temperature and high heat-flux surfaces. The G-CNT hybrid offers a unique platform to integrate the superior axial heat transfer capability of individual CNTs via their parallel arrangement. The immersion of the G-CNT in water enables an additional heat dissipation path via the solid-liquid interaction, allowing for the sustainable cooling of the hot surface under a constant power input of up to 10 000 W cm-2.

  14. Developing and validating a chemical bonding instrument for Korean high school students

    Science.gov (United States)

    Jang, Nak Han

    The major purpose of this study was to develop a reliable and valid instrument designed to collect and investigate on Korean high school students' understanding about concepts regarding chemical bonding. The Chemical Bonding Diagnostic Test (CBDT) was developed by the procedure by previously relevant researches (Treagust, 1985; Peterson, 1986; Tan, 1994). The final instrument consisted of 15 two-tier items. The reliability coefficient (Cronbach alpha) for the whole test was 0.74. Also, the range of values for the discrimination index was from 0.38 to 0.90 and the overall average difficulty index was 0.38. The test was administered to 716 science declared students in Korean high school. The 37 common misconceptions on chemical bonding were identified through analysis of the items from the CBDT. The grade 11 students had slightly more misconceptions than the grade 12 students for ionic bonding, covalent bonding, and hydrogen bonding while the grade 12 students had more misconceptions about octet rule and hydrogen bonding than the grade 11 students. From the analysis of ANCOVA, there was no significant difference in grades, and between grade levels and gender on the mean score of CBDT. However, there was a significant difference in gender and a significant interaction between grade levels and chemistry preference. In conclusion, Korean high school students had the most common misconception about the electron configuration on ionic bonding and the water density on hydrogen bonding. Korean students' understanding about the chemical bonding was dependent on the interaction between grade levels and the chemistry preference. Consequently, grade 12 chemistry-preferred students had the highest mean scores among student groups concerned by this study.

  15. Effects of Mechanical and Chemical Pretreatments of Zirconia or Fiber Posts on Resin Cement Bonding.

    Directory of Open Access Journals (Sweden)

    Rui Li

    Full Text Available The bonding strength between resin cement and posts is important for post and core restorations. An important method of improving the bonding strength is the use of various surface pretreatments of the post. In this study, the surfaces of zirconia (fiber posts were treated by mechanical and/or chemical methods such as sandblasting and silanization. The bonding strength between the zirconia (fiber post and the resin cement was measured by a push-out method after thermocycling based on the adhesion to Panavia F 2.0 resin cement. The zirconia and fiber posts exhibited different bonding strengths after sandblasting and/or silanization because of the different strengths and chemical structures. The zirconia post showed a high bonding strength of up to 17.1 MPa after a combined treatment of sandblasting and silanization because of the rough surface and covalent bonds at the interface. This effect was also enhanced by using 1,2-bis(trimethoxysilylethane for the formation of a flexible layer at the interface. In contrast, a high bonding strength of 13.9 MPa was obtained for the fiber post treated by silane agents because the sandblasting treatment resulted in damage to the fiber post, as observed by scanning electron microscopy. The results indicated that the improvement in the bonding strength between the post and the resin cement could be controlled by different chemical and/or mechanical treatments. Enhanced bonding strength depended on covalent bonding and the surface roughness. A zirconia post with high bonding strength could potentially be used for the restoration of teeth in the future.

  16. Isotope effects on chemical shifts in the study of intramolecular hydrogen bonds

    DEFF Research Database (Denmark)

    Hansen, Poul Erik

    2015-01-01

    The paper deals with the use of isotope effects on chemical shifts in characterizing intramolecular hydrogen bonds. Both so-called resonance-assisted (RAHB) and non-RAHB systems are treated. The importance of RAHB will be discussed. Another very important issue is the borderline between “static......” and tautomeric systems. Isotope effects on chemical shifts are particularly useful in such studies. All kinds of intramolecular hydrogen bonded systems will be treated, typical hydrogen bond donors: OH, NH, SH and NH+, typical acceptors C=O, C=N, C=S C=N−. The paper will be deal with both secondary and primary...... isotope effects on chemical shifts. These two types of isotope effects monitor the same hydrogen bond, but from different angles...

  17. Initiated chemical vapor deposited nanoadhesive for bonding National Ignition Facility's targets

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tom [Univ. of California, Berkeley, CA (United States)

    2016-05-19

    Currently, the target fabrication scientists in National Ignition Facility Directorate at Lawrence Livermore National Laboratory (LLNL) is studying the propagation force resulted from laser impulses impacting a target. To best study this, they would like the adhesive used to glue the target substrates to be as thin as possible. The main objective of this research project is to create adhesive glue bonds for NIF’s targets that are ≤ 1 μm thick. Polyglycidylmethacrylate (PGMA) thin films were coated on various substrates using initiated chemical vapor deposition (iCVD). Film quality studies using white light interferometry reveal that the iCVD PGMA films were smooth. The coated substrates were bonded at 150 °C under vacuum, with low inflow of Nitrogen. Success in bonding most of NIF’s mock targets at thicknesses ≤ 1 μm indicates that our process is feasible in bonding the real targets. Key parameters that are required for successful bonding were concluded from the bonding results. They include inert bonding atmosphere, sufficient contact between the PGMA films, and smooth substrates. Average bond strength of 0.60 MPa was obtained from mechanical shearing tests. The bonding failure mode of the sheared interfaces was observed to be cohesive. Future work on this project will include reattempt to bond silica aerogel to iCVD PGMA coated substrates, stabilize carbon nanotube forests with iCVD PGMA coating, and kinetics study of PGMA thermal crosslinking.

  18. First-principles simulations on bonding pathways of chemical transformations under hydrostatic compression

    Science.gov (United States)

    Hu, Anguang; Zhang, Fan

    2012-02-01

    High pressure as a thermodynamic parameter provides a strong structural constraint to lead chemical transformations with selective ways. Thus, chemical transformations under pressure can create novel materials which may not be accessible by covalent synthesis. However, bonding evolution toward high pressure chemical transformations can be a complex process and may happen over widely different pressures. To understand bonding evolution pathways of high pressure chemical transformations, first-principles simulations were performed following hydrostatic compression enthalpy minimization paths to obtain experimentally and theoretically established phase transitions of carbon. The results showed that the chemical transformations from hydrostatic compression carbon to single-bonded phases were characterized by a sudden decrease in principal stress components, indicating the onset of chemical transformation. On this basis, a number of hydrostatic compression chemical transformations from molecular precursors to novel materials were predicted, such as hydrocarbon graphane, a hydrogenated carbon nitride sheet, and carbon nitrides. All predicted hydrostatic compression transformations are featured as a sudden change in principal stress components, representing chemical bonding destruction and formation reactions with a cell volume collapse.

  19. Chemical modification of hybrid nanostructures (POSS for application as lubricant

    Directory of Open Access Journals (Sweden)

    Caroline Luvison

    2014-08-01

    Full Text Available Polyhedral oligomeric silsesquioxanes (POSS are hybrid structures type RSiO15n, with n organic groups R. These molecules can be easily functionalized by simply changing the chemical constitution of the organic groups. In this work, chemical modification of POSS-NH2 was performed by amidation reaction with butyric acid at elevated temperature, 160°C. The formation of the amide group is evinced by the appearance of NH angular deformation band at 1540 cm-1 in the FTIR spectra. Approximately 40% of the amino groups reacted, according to titration results. The formation of the amide groups resulted in a shift of the glass transition temperature (Tg from -36.9°C to -25.6°C for the modified-POSS sample. Both POSS-NH2 and modified-POSS samples exhibited similar thermal degradation pattern. Analysis of the pairs distribution function (PDF has determined that the hybrid nanoparticles are separated by a periodic distance of approximately 1.32 nm. POSS-NH2 and modified-POSS exhibit newtonian behavior, which will range from 10-1 s-1 and 1000 s-1. The viscosity decreased with increasing temperature, a typical behavior of liquid lubricants.

  20. Representational Classroom Practices that Contribute to Students' Conceptual and Representational Understanding of Chemical Bonding

    Science.gov (United States)

    Hilton, Annette; Nichols, Kim

    2011-11-01

    Understanding bonding is fundamental to success in chemistry. A number of alternative conceptions related to chemical bonding have been reported in the literature. Research suggests that many alternative conceptions held by chemistry students result from previous teaching; if teachers are explicit in the use of representations and explain their content-specific forms and functions, this might be avoided. The development of an understanding of and ability to use multiple representations is crucial to students' understanding of chemical bonding. This paper draws on data from a larger study involving two Year 11 chemistry classes (n = 27, n = 22). It explores the contribution of explicit instruction about multiple representations to students' understanding and representation of chemical bonding. The instructional strategies were documented using audio-recordings and the teacher-researcher's reflection journal. Pre-test-post-test comparisons showed an improvement in conceptual understanding and representational competence. Analysis of the students' texts provided further evidence of the students' ability to use multiple representations to explain macroscopic phenomena on the molecular level. The findings suggest that explicit instruction about representational form and function contributes to the enhancement of representational competence and conceptual understanding of bonding in chemistry. However, the scaffolding strategies employed by the teacher play an important role in the learning process. This research has implications for professional development enhancing teachers' approaches to these aspects of instruction around chemical bonding.

  1. Relaxation of the chemical bond skin chemisorption size matter ZTP mechanics H2O myths

    CERN Document Server

    Sun, Chang Q

    2014-01-01

    The aim of this book is to explore the detectable properties of a material to the parameters of bond and non-bond involved and to clarify the interdependence of various properties. This book is composed of four parts; Part I deals with the formation and relaxation dynamics of bond and non-bond during chemisorptions with uncovering of the correlation among the chemical bond, energy band, and surface potential barrier (3B) during reactions; Part II is focused on the relaxation of bonds between atoms with fewer neighbors than the ideal in bulk with unraveling of the bond order-length-strength (BOLS) correlation mechanism, which clarifies the nature difference between nanostructures and bulk of the same substance; Part III deals with the relaxation dynamics of bond under heating and compressing with revealing of rules on the temperature-resolved elastic and plastic properties of low-dimensional materials; Part IV is focused on the asymmetric relaxation dynamics of the hydrogen bond (O:H-O) and the anomalous behav...

  2. Repair bond strength of resin composite to a novel CAD/CAM hybrid ceramic using different repair systems.

    Science.gov (United States)

    Elsaka, Shaymaa E

    2015-01-01

    This study evaluated the repair bond strength of a nanohybrid resin composite to a novel CAD/CAM hybrid ceramic based on four intraoral ceramic repair systems. Vita Enamic (VE) CAD/CAM hybrid ceramic was used in this study. Specimens were divided into five test groups according to the repair method performed on the ceramic surface: Gr C (No treatment; control); Gr CZ (Cimara Zircon); Gr PR (Porcelain Repair); Gr CR (Clearfil Repair); and Gr CS (CoJet system). Nanohybrid resin composite (GrandioSO) was packed onto treated ceramic surfaces for adhesion testing using microtensile bond strength test. Debonded specimens were examined with a stereomicroscope and SEM to determine the fracture mode. Data were analyzed using ANOVA and Tukey's HSD test. PR and CZ repair systems significantly enhanced the bond strength of nanohybrid resin composite to VE CAD/CAM hybrid ceramic when compared with the other tested repair systems.

  3. Immobilization of TiO2 nanoparticles in polymeric substrates by chemical bonding for multi-cycle photodegradation of organic pollutants.

    Science.gov (United States)

    Lei, Ping; Wang, Feng; Gao, Xiaowei; Ding, Yanfen; Zhang, Shimin; Zhao, Jincai; Liu, Shaoren; Yang, Mingshu

    2012-08-15

    Nano titanium dioxide (TiO(2)) photocatalyst is generally immobilized onto the matrix through the physical absorption, hydrogen bonding or chemical bonding, which is utilized for the application of wastewater treatment. In this research, TiO(2) nanoparticles were immobilized in polyvinyl alcohol (PVA) matrix via solution-casting combined with heat-treatment method. Structure characterization indicated that Ti-O-C chemical bond formed via dehydration reaction between TiO(2) and PVA during the heat treatment process, and TiO(2) nanoparticles had been chemically immobilized in PVA matrix. Photodegradation results of methyl orange (MO) showed that the film with 10 wt% TiO(2) and treated at 140°C for 2h exhibited a remarkable ultraviolet (UV) photocatalytic activity, approximately close to the TiO(2) slurry system. This was mainly attributed to the fixation effect by Ti-O-C chemical bonds, which was indirectly confirmed by the slight loss of TiO(2) photocatalysts even after 25-cycle use. In addition, the good swelling ability of PVA matrix provided the MO molecules with more opportunities to fully contact with TiO(2), thus benefited the photocatalysis. This route to chemically immobilize TiO(2) nanoparticles is simple and cheap to prepare polymer/TiO(2) hybrid materials with high photocatalytic activity for multi-cycle use, which is of significance to the practical application of TiO(2) catalysts.

  4. Electronic parameters of Sr2Nb2O7 and chemical bonding

    DEFF Research Database (Denmark)

    Atuchin, V.V.; Grivel, Jean-Claude; Korotkov, A.S.

    2008-01-01

    /2)) and Delta(O-Sr) = BE(O 1s)-BE(Sr 3d(5/2)), were used to characterize the valence electron transfer on the formation of the Nb-O and Sr-O bonds. The chemical bonding effects were considered on the basis of our XPS results for Sr2Nb2O7 and earlier published structural and XPS data for other Sr- or Nb...

  5. B-C-N Compounds with Mixed Hybridization of sp2-Like and sp3-Like Bonds

    Institute of Scientific and Technical Information of China (English)

    LUO Xiao-Guang; HE Ju-Long

    2012-01-01

    We perform first-principles calculations of the structural and electronic properties of hypothetical bc6-BC4N and N-substituted bc6-BC4N,which are derived from a body-center-cubic carbon structure.Our calculations show that the former is a semiconductor with an indirect band gap of 0.91 eV and the latter is metallic.The calculated bond length,bond population,and charge density of N-substituted bc6-BC4N indicate that one C-N bond has been broken after N-substitution,which means that the structure contains a mixed hybridization of sp2-like and sp3-1ike bonds.At the pressure above 100 GPa,the structure changes to a pure sp3-like hybridization.

  6. Effective solidification/stabilisation of mercury-contaminated wastes using zeolites and chemically bonded phosphate ceramics.

    Science.gov (United States)

    Zhang, Shaoqing; Zhang, Xinyan; Xiong, Ya; Wang, Guoping; Zheng, Na

    2015-02-01

    In this study, two kinds of zeolites materials (natural zeolite and thiol-functionalised zeolite) were added to the chemically bonded phosphate ceramic processes to treat mercury-contaminated wastes. Strong promotion effects of zeolites (natural zeolite and thiol-functionalised zeolite) on the stability of mercury in the wastes were obtained and these technologies showed promising advantages toward the traditional Portland cement process, i.e. using Portland cement as a solidification agent and natural or thiol-functionalised zeolite as a stabilisation agent. Not only is a high stabilisation efficiency (lowered the Toxicity Characteristic Leaching Procedure Hg by above 10%) obtained, but also a lower dosage of solidification (for thiol-functionalised zeolite as stabilisation agent, 0.5 g g(-1) and 0.7 g g(-1) for chemically bonded phosphate ceramic and Portland cement, respectively) and stabilisation agents (for natural zeolite as stabilisation agent, 0.35 g g(-1) and 0.4 g g(-1) for chemically bonded phosphate ceramic and Portland cement, respectively) were used compared with the Portland cement process. Treated by thiol-functionalised zeolite and chemically bonded phosphate ceramic under optimum parameters, the waste containing 1500 mg Hg kg(-1) passed the Toxicity Characteristic Leaching Procedure test. Moreover, stabilisation/solidification technology using natural zeolite and chemically bonded phosphate ceramic also passed the Toxicity Characteristic Leaching Procedure test (the mercury waste containing 625 mg Hg kg(-1)). Moreover, the presence of chloride and phosphate did not have a negative effect on the chemically bonded phosphate ceramic/thiol-functionalised zeolite treatment process; thus, showing potential for future application in treatment of 'difficult-to-manage' mercury-contaminated wastes or landfill disposal with high phosphate and chloride content.

  7. Chemically diverse and multifunctional hybrid organic-inorganic perovskites

    Science.gov (United States)

    Li, Wei; Wang, Zheming; Deschler, Felix; Gao, Song; Friend, Richard H.; Cheetham, Anthony K.

    2017-02-01

    Hybrid organic-inorganic perovskites (HOIPs) can have a diverse range of compositions including halides, azides, formates, dicyanamides, cyanides and dicyanometallates. These materials have several common features, including their classical ABX3 perovskite architecture and the presence of organic amine cations that occupy the A-sites. Current research in HOIPs tends to focus on metal halide HOIPs, which show promise for use in solar cells and optoelectronic devices; however, the other subclasses also exhibit a diverse range of physical properties. In this Review, we summarize the chemical variability and structural diversity of all known HOIP subclasses. We also present a comprehensive account of their intriguing physical properties, including photovoltaic and optoelectronic properties, dielectricity, magnetism, ferroelectricity, ferroelasticity and multiferroicity. Moreover, we discuss the current challenges and future opportunities in this exciting field.

  8. Development of a hybrid chemical/mechanical heat pump

    Science.gov (United States)

    Grzyll, Lawrence R.; Silvestri, John J.; Scaringe, Robert P.

    1991-01-01

    The authors present the current development status of a hybrid chemical/mechanical heat pump for low-lift applications. The heat pump provides electronics cooling by evaporating a pure refrigerant from an absorbent/refrigerant mixture in a generator/cold plate. The current development focused on evaluation of absorbent/refrigerant pairs, corrosion testing, pump and compressor design, and electronic cold plate design. Two cycle configurations were considered. The first configuration utilized a standard mechanical compressor and pump. The second cycle configuration investigated pumps and compressors with non-moving parts. An innovative generator/cold plate design is also presented. The development to date shows that this cycle has about the same performance as standard vapor compression heat pumps with standard refrigerants but may have some performance and reliability advantages over vapor compression heat pumps.

  9. Development of a hybrid chemical/mechanical heat pump

    Science.gov (United States)

    Grzyll, Lawrence R.; Silvestri, John J.; Scaringe, Robert P.

    1991-01-01

    The authors present the current development status of a hybrid chemical/mechanical heat pump for low-lift applications. The heat pump provides electronics cooling by evaporating a pure refrigerant from an absorbent/refrigerant mixture in a generator/cold plate. The current development focused on evaluation of absorbent/refrigerant pairs, corrosion testing, pump and compressor design, and electronic cold plate design. Two cycle configurations were considered. The first configuration utilized a standard mechanical compressor and pump. The second cycle configuration investigated pumps and compressors with non-moving parts. An innovative generator/cold plate design is also presented. The development to date shows that this cycle has about the same performance as standard vapor compression heat pumps with standard refrigerants but may have some performance and reliability advantages over vapor compression heat pumps.

  10. Hybridization vs. Bond Stretching Isomerism in Ru(II Cyclometalated Complexes of 2-Phenylpyridine

    Directory of Open Access Journals (Sweden)

    Roberto Salcedo

    2011-12-01

    Full Text Available The phenomenon of formation of two isomers, yellow and orange, of the cyclometalated Ru(II complex, [Ru(o-C6H4-py(MeCN4]+, was investigated by EELS spectroscopy and theoretical calculations. Both forms show very similar structures and spectroscopic properties, but slight differences in X-ray data and absorption between them were noted. No double minimum on the potential energy surface was found and thus these two forms cannot be considered as bond stretching isomers. However, the DFT study revealed the change in the hybridization of the carbon in trans-position of one of acetonitrile ligands. This effect can be responsible for the difference in colour. The results of the theoretical modelling coincide well with the experimental EELS data.

  11. Cell-in-Shell Hybrids: Chemical Nanoencapsulation of Individual Cells.

    Science.gov (United States)

    Park, Ji Hun; Hong, Daewha; Lee, Juno; Choi, Insung S

    2016-05-17

    Nature has developed a fascinating strategy of cryptobiosis ("secret life") for counteracting the stressful, and often lethal, environmental conditions that fluctuate sporadically over time. For example, certain bacteria sporulate to transform from a metabolically active, vegetative state to an ametabolic endospore state. The bacterial endospores, encased within tough biomolecular shells, withstand the extremes of harmful stressors, such as radiation, desiccation, and malnutrition, for extended periods of time and return to a vegetative state by breaking their protective shells apart when their environment becomes hospitable for living. Certain ciliates and even higher organisms, for example, tardigrades, and others are also found to adopt a cryptobiotic strategy for survival. A common feature of cryptobiosis is the structural presence of tough sheaths on cellular structures. However, most cells and cellular assemblies are not "spore-forming" and are vulnerable to the outside threats. In particular, mammalian cells, enclosed with labile lipid bilayers, are highly susceptible to in vitro conditions in the laboratory and daily life settings, making manipulation and preservation difficult outside of specialized conditions. The instability of living cells has been a main bottleneck to the advanced development of cell-based applications, such as cell therapy and cell-based sensors. A judicious question arises: can cellular tolerance against harmful stresses be enhanced by simply forming cell-in-shell hybrid structures? Experimental results suggest that the answer is yes. A micrometer-sized "Iron Man" can be generated by chemically forming an ultrathin (cell. Since the report on silica nanoencapsulation of yeast cells, in which cytoprotective yeast-in-silica hybrids were formed, several synthetic strategies have been developed to encapsulate individual cells in a cytocompatible fashion, mimicking the cryptobiotic cell-in-shell structures found in nature, for example

  12. Dynamic Analysis and Design Optimization of Series Hydraulic Hybrid System through Power Bond Graph Approach

    Directory of Open Access Journals (Sweden)

    R. Ramakrishnan

    2014-01-01

    Full Text Available The availability of natural gas and crude oil resources has been declining over the years. In automobile sector, the consumption of crude oil is 63% of total crude oil production in the world. Hence, automobile industries are placing more emphasis on energy efficient hydraulic hybrid systems, which can replace their conventional transmission systems. Series hydraulic hybrid system (SHHS is a multidomain mechatronics system with two distinct power sources that includes prime mover and hydropneumatic accumulator. It replaces the conventional transmission system to drive the vehicle. The sizing of the subsystems in SHHS plays a major role in improving the energy efficiency of the vehicle. In this paper, a power bond graph approach is used to model the dynamics of the SHHS. The obtained simulation results indicate the energy flow during various modes of operations. It also includes the dynamic response of hydropneumatic accumulator, prime mover, and system output speed. Further, design optimization of the system is carried out to optimize the process parameters for maximizing the system energy efficiency. This leads to increase in fuel economy and environmentally friendly vehicle.

  13. New Inorganic-organic Hybrid Tetravanadate:Preparation, Characterization and Application in Chemically Modified Electrode

    Institute of Scientific and Technical Information of China (English)

    SUN Ying-hua; LI Xiao-ping; MEI Ze-min; ZHU Yu; NIU Li

    2011-01-01

    A new inorganic-organic hybrid tetravanadate [Co(2,2'-bpy)3]2V4O12.llH2O(l) has been prepared and characterized. X-Ray diffraction study reveals that compound 1 contains classical cluster anions [V4O12]4-, coordi nated cations [Co(2,2'-bpy)3]2+ and eleven water molecules, in which an interesting decamer water cluster is formed.The hybrid nanoparticles were firstly used as a bulk-modifier to fabricate a chemically modified paste electrode (1-CPE). The electrochemical behavior and electrocatalysis of 1-CPE have been studied in detail. The results indicate that 1-CPE has a good electrocatalytic activity toward the reduction of bromate in a 0.5 mol/L H2SO4 aqueous solu tion. I-CPE shows remarkable stability that be ascribed to the hydrogen bonding interactions between V4O12 cluster and water cluster, which are very important for practical application in electrode modification.

  14. Halogen bonded supramolecular capsules: a challenging test case for quantum chemical methods.

    Science.gov (United States)

    Sure, Rebecca; Grimme, Stefan

    2016-08-02

    Recently, Diederich et al. synthesized the first supramolecular capsule with a well-defined four-point halogen bonding interaction [Angew. Chem., Int. Ed., 2015, 54, 12339]. This interesting system comprising about 400 atoms represents a challenging test case for accurate quantum chemical methods. We investigate it with our new density functional based composite method for structures and noncovalent interactions (PBEh-3c) as well as our standard protocol for supramolecular thermochemistry and give predictions for chemical modifications to improve the binding strength.

  15. Effect of Microwave Radiation on Enzymatic and Chemical Peptide Bond Synthesis on Solid Phase

    Directory of Open Access Journals (Sweden)

    Alessandra Basso

    2009-01-01

    Full Text Available Peptide bond synthesis was performed on PEGA beads under microwave radiations. Classical chemical coupling as well as thermolysin catalyzed synthesis was studied, and the effect of microwave radiations on reaction kinetics, beads' integrity, and enzyme activity was assessed. Results demonstrate that microwave radiations can be profitably exploited to improve reaction kinetics in solid phase peptide synthesis when both chemical and biocatalytic strategies are used.

  16. Generating giant and tunable nonlinearity in a macroscopic mechanical resonator from a single chemical bond

    Science.gov (United States)

    Huang, Pu; Zhou, Jingwei; Zhang, Liang; Hou, Dong; Lin, Shaochun; Deng, Wen; Meng, Chao; Duan, Changkui; Ju, Chenyong; Zheng, Xiao; Xue, Fei; Du, Jiangfeng

    2016-05-01

    Nonlinearity in macroscopic mechanical systems may lead to abundant phenomena for fundamental studies and potential applications. However, it is difficult to generate nonlinearity due to the fact that macroscopic mechanical systems follow Hooke's law and respond linearly to external force, unless strong drive is used. Here we propose and experimentally realize high cubic nonlinear response in a macroscopic mechanical system by exploring the anharmonicity in chemical bonding interactions. We demonstrate the high tunability of nonlinear response by precisely controlling the chemical bonding interaction, and realize, at the single-bond limit, a cubic elastic constant of 1 × 1020 N m-3. This enables us to observe the resonator's vibrational bi-states transitions driven by the weak Brownian thermal noise at 6 K. This method can be flexibly applied to a variety of mechanical systems to improve nonlinear responses, and can be used, with further improvements, to explore macroscopic quantum mechanics.

  17. Bonding and bio-properties of hybrid laser/magnetron Cr-enriched DLC layers

    Energy Technology Data Exchange (ETDEWEB)

    Jelinek, Miroslav, E-mail: jelinek@fzu.cz [Institute of Physics, Academy of Sciences of the Czech Republic, v.v.i, Na Slovance 2, 18221 Prague (Czech Republic); Czech Technical University in Prague, Faculty of Biomedical Engineering, nam. Sitna 3105, 27201 Kladno (Czech Republic); Zemek, Josef [Institute of Physics, Academy of Sciences of the Czech Republic, v.v.i, Na Slovance 2, 18221 Prague (Czech Republic); Vandrovcová, Marta; Bačáková, Lucie [Institute of Physiology of the Czech Academy of Sciences of the Czech Republic, v.v.i., Videnska 1083, 14220 Prague 4 (Czech Republic); Kocourek, Tomáš; Remsa, Jan; Písařík, Petr [Institute of Physics, Academy of Sciences of the Czech Republic, v.v.i, Na Slovance 2, 18221 Prague (Czech Republic); Czech Technical University in Prague, Faculty of Biomedical Engineering, nam. Sitna 3105, 27201 Kladno (Czech Republic)

    2016-01-01

    Chromium-enriched diamond-like carbon (DLC) layers were prepared by a hybrid technology using a combination of pulsed laser deposition (PLD) and magnetron sputtering. XRD revealed no chromium peaks, indicating that the layers are mostly amorphous. Carbon (sp{sup 2} and sp{sup 3} bonds) and chromium bonds were determined by XPS from C 1s, O 1s, and Cr 2p photoelectron peaks. Depending on the deposition conditions, the concentration of Cr in DLC layers moved from zero to 10 at.% for as-received sample surfaces, and to about 31 at.% after mild sputter-cleaning by argon ion cluster beam. It should be noted that the most stable Cr{sup 3+} bonding state is in Cr{sub 2}O{sub 3} and Cr(OH){sub 3}, and that there is the toxic Cr{sup 6+} state in CrO{sub 3}. The surface content of hexavalent chromium in the Cr 2p3/2 spectra is rather low, but discernible. The population density of Saos-2 cells was the highest in samples containing higher concentrations of chromium 7.7 and 10 at.%. This means that higher concentrations of chromium supported the cell adhesion and proliferation. In addition, as revealed by a LIVE/DEAD viability/cytotoxicity kit, the cells on all Cr-containing samples maintained high viability (96 to 99%) on days 1 and 3 after seeding. However, this seemingly positive cell behavior could be associated with the risk of dedifferentiation and oncogenic transformation of cells. - Highlights: • DLC and chromium-enriched DLC layers were prepared by hybrid laser–magnetron deposition. • The content of chromium in DLC varied up to 10 at.% (31 at.% after ion beam sputtering). • The surface content of toxic hexavalent chromium in the Cr 2p3/2 spectra is rather low but discernible. • Higher concentrations of chromium supported the cell adhesion and proliferation. • Cells on all Cr-containing samples maintained high viability (96 to 99%).

  18. The Collaboration of Cooperative Learning and Conceptual Change: Enhancing the Students' Understanding of Chemical Bonding Concepts

    Science.gov (United States)

    Eymur, Gülüzar; Geban, Ömer

    2017-01-01

    The main purpose of this study was to investigate the effects of cooperative learning based on conceptual change approach instruction on ninth-grade students' understanding in chemical bonding concepts compared to traditional instruction. Seventy-two ninth-grade students from two intact chemistry classes taught by the same teacher in a public high…

  19. Nuclear radiation as a probe of chemical bonding: the current interplay between theory and experiment

    Energy Technology Data Exchange (ETDEWEB)

    Newton, M D

    1978-01-01

    After a survey of appropriate theoretical formalisms, recent confrontations of theory and experiment in the areas of neutron scattering, Moessbauer spectroscopy, and positron chemistry are discussed, with major emphasis on the degree to which simple concepts of chemical bonding can be refined by complementary use of the above experimental probes and the powerful techniques of computational quantum chemistry.

  20. Structure and bonding of second-row hydrides

    OpenAIRE

    Blinder, S. M.

    2014-01-01

    The atomic orbitals, hybridization and chemical bonding of the most common hydrides of boron, carbon, nitrogen and oxygen are described. This can be very instructive for beginning students in chemistry and chemical physics.

  1. A review of the hybrid techniques for the fabrication of hard magnetic microactuators based on bonded magnetic powders

    Science.gov (United States)

    Pallapa, M.; Yeow, J. T. W.

    2015-02-01

    Polymer composites based on permanent magnetic bonded powders exhibit immense potential for applications in microactuators and sensors with magnetic performances comparable to their fully dense counterparts. While fabrication and integration of magnetic devices based on bonded magnetic powders is challenging via conventional deposition and electrochemical growth techniques, hybrid fabrication offers a promising alternative. This paper presents the evolution of permanent magnetic materials into bonded magnetic powders, the magnetic performance figures of merit of permanent magnetic materials significant for the design and manufacture of polymer based sensors and actuators. A review of the hybrid fabrication techniques such as replica molding, squeegee coating, spin casting etc are reported. Critical factors affecting the fabrication of polymer magnetic composites such as filler particle size and effect of magnetic field during fabrication are discussed. Prior art based on polymer magnetic composites for the fabrication of hard magnetic films and hard magnetic actuators are presented.

  2. Students' Reasoning about Basic Chemical Thermodynamics and Chemical Bonding: What Changes Occur during a Context-based Post-16 Chemistry Course?

    Science.gov (United States)

    Barker, Vanessa; Millar, Robin

    2000-01-01

    A longitudinal study of students (n=250) following the Salters Advanced Chemistry course probed a range of chemical ideas including the exothermicity of bond formation and the development of thinking about covalent, ionic, and intermolecular bonds. At the start, many students demonstrated misunderstandings about these chemical ideas, but their…

  3. Electron-electron interactions in the chemical bond: ``1/3” Effect in the bond length of hydrogen molecule

    Indian Academy of Sciences (India)

    P Ganguly

    2001-10-01

    The prominent ``1/3” effect observed in the Hall effect plateaus of twodimensional electron gas (2DEG) systems has been postulated to indicating 1/3 fractional charge quasiparticle excitations arising from electron-electron interactions. Tunneling shot-noise experiments on 2DEF exhibiting fractional quantum Hall effect (FQHE) shows evidence for tunnelling of particles with and /3 charges for a constant band mass. A ``1/3” effect in the hydrogen molecule is seen in as much as its internuclear distance, - = - + +, with |+/-| = 1/3. This is examined in terms of electron-electron interactions involving electron- and hole quasiparticles, (-) and (ℎ+), equivalent to those observed in FQHE shot-noise experiments. The (/) ratio of the (-) and (ℎ+) quasiparticles is kept at 1: -3. Instead of a 2DEG, these particles are treated as being in flat Bohr orbits. A treatment in the language of charge-flux tube composites for the hydrogen atom as well as the hydrogen molecule is attempted. Such treatment gives important insights into changes in chemical potential and bond energy on crossing a phase boundary during the atom-bond transition as well as on models for FQHE itself.

  4. Hybrid framework for the simulation of stochastic chemical kinetics

    Science.gov (United States)

    Duncan, Andrew; Erban, Radek; Zygalakis, Konstantinos

    2016-12-01

    Stochasticity plays a fundamental role in various biochemical processes, such as cell regulatory networks and enzyme cascades. Isothermal, well-mixed systems can be modelled as Markov processes, typically simulated using the Gillespie Stochastic Simulation Algorithm (SSA) [25]. While easy to implement and exact, the computational cost of using the Gillespie SSA to simulate such systems can become prohibitive as the frequency of reaction events increases. This has motivated numerous coarse-grained schemes, where the "fast" reactions are approximated either using Langevin dynamics or deterministically. While such approaches provide a good approximation when all reactants are abundant, the approximation breaks down when one or more species exist only in small concentrations and the fluctuations arising from the discrete nature of the reactions become significant. This is particularly problematic when using such methods to compute statistics of extinction times for chemical species, as well as simulating non-equilibrium systems such as cell-cycle models in which a single species can cycle between abundance and scarcity. In this paper, a hybrid jump-diffusion model for simulating well-mixed stochastic kinetics is derived. It acts as a bridge between the Gillespie SSA and the chemical Langevin equation. For low reactant reactions the underlying behaviour is purely discrete, while purely diffusive when the concentrations of all species are large, with the two different behaviours coexisting in the intermediate region. A bound on the weak error in the classical large volume scaling limit is obtained, and three different numerical discretisations of the jump-diffusion model are described. The benefits of such a formalism are illustrated using computational examples.

  5. Probing nanoscale chemical segregation and surface properties of antifouling hybrid xerogel films.

    Science.gov (United States)

    Destino, Joel F; Gatley, Caitlyn M; Craft, Andrew K; Detty, Michael R; Bright, Frank V

    2015-03-24

    Over the past decade there has been significant development in hybrid polymer coatings exhibiting tunable surface morphology, surface charge, and chemical segregation-all believed to be key properties in antifouling (AF) coating performance. While a large body of research exists on these materials, there have yet to be studies on all the aforementioned properties in a colocalized manner with nanoscale spatial resolution. Here, we report colocalized atomic force microscopy, scanning Kelvin probe microscopy, and confocal Raman microscopy on a model AF xerogel film composed of 1:9:9 (mol:mol:mol) 3-aminopropyltriethoxysilane (APTES), n-octyltriethoxysilane (C8), and tetraethoxysilane (TEOS) formed on Al2O3. This AF film is found to consist of three regions that are chemically and physically unique in 2D and 3D across multiple length scales: (i) a 1.5 μm thick base layer derived from all three precursors; (ii) 2-4 μm diameter mesa-like features that are enriched in free amine (from APTES), depleted in the other species and that extend 150-400 nm above the base layer; and (iii) 1-2 μm diameter subsurface inclusions within the base layer that are enriched in hydrogen-bonded amine (from APTES) and depleted in the other species.

  6. Electronic structure and chemical bonding of Li4Pt3Si

    Science.gov (United States)

    Matar, S. F.; Pöttgen, R.; Al Alam, A. F.; Ouaini, N.

    2012-07-01

    The electronic structure of rhombohedral Li4Pt3Si (space group R32) is examined from ab initio with an assessment of the properties of chemical bonding relating to the presence of different Li and Pt Wyckoff sites. The structure with totally de-intercalated Li keeps the characteristics of the pristine compound with a reduction of the volume albeit with less cohesive energy. The binding energies of Li point to different bonding intensities according to their different Wyckoff sites and indicate the possibility of delithiation.

  7. Performance of a hybrid chemical/mechanical heat pump

    Science.gov (United States)

    Silvestri, John J.; Scaringe, Robert P.; Grzyll, Lawrence R.

    1990-01-01

    The authors present the design and preliminary results of the performance of a hybrid chemical/mechanical, low-lift (20 C) heat pump. Studies have indicated that this heat pump has several advantages over the traditional single fluid vapor compression (reverse Rankine) heat pump. Included in these benefits are: 1) increased COPc due to the approximation of the cycle to the Lorenz cycle and due to the availability of the heat of solution, along with the heat of vaporization, to provide cooling; and 2) ease of variation in system cooling capacity by changing the fluid composition. The system performance is predicted for a variety of refrigerant-absorbent pairs. Cooling capacity is determined for systems operating with ammonia as the refrigerant and lithium nitrate and sodium thiocyanate as the absorbents and also with water as the refrigerant and magnesium chloride, potassium hydroxide, lithium bromide, sodium hydroxide, and sulfuric acid as the absorbents. Early indications have shown that the systems operating with water as the refrigerant operate at 2-4 times the capacity of the ammonia-refrigerant-based systems. Using existing working fluids in the proposed innovative design, a coefficient-of-performance improvement of 21 percent is possible when compared to the best vapor compression systems analyzed.

  8. Performance of a hybrid chemical/mechanical heat pump

    Science.gov (United States)

    Silvestri, John J.; Scaringe, Robert P.; Grzyll, Lawrence R.

    1990-01-01

    The authors present the design and preliminary results of the performance of a hybrid chemical/mechanical, low-lift (20 C) heat pump. Studies have indicated that this heat pump has several advantages over the traditional single fluid vapor compression (reverse Rankine) heat pump. Included in these benefits are: 1) increased COPc due to the approximation of the cycle to the Lorenz cycle and due to the availability of the heat of solution, along with the heat of vaporization, to provide cooling; and 2) ease of variation in system cooling capacity by changing the fluid composition. The system performance is predicted for a variety of refrigerant-absorbent pairs. Cooling capacity is determined for systems operating with ammonia as the refrigerant and lithium nitrate and sodium thiocyanate as the absorbents and also with water as the refrigerant and magnesium chloride, potassium hydroxide, lithium bromide, sodium hydroxide, and sulfuric acid as the absorbents. Early indications have shown that the systems operating with water as the refrigerant operate at 2-4 times the capacity of the ammonia-refrigerant-based systems. Using existing working fluids in the proposed innovative design, a coefficient-of-performance improvement of 21 percent is possible when compared to the best vapor compression systems analyzed.

  9. [Influence of primers ' chemical composition on shear bond strength of resin cement to zirconia ceramic].

    Science.gov (United States)

    Łagodzińska, Paulina; Bociong, Kinga; Dejak, Beata

    2014-01-01

    Resin cements establish a strong durable bond between zirconia ceramic and hard tissues of teeth. It is essential to use primers with proper chemical composition before cementation. The aim of this study was to assess the influence of primer's chemical composition on the shear bond strength of zirconia ceramic to resin cements. 132 zirconia specimens were randomly assigned to four groups. There were four resin systems used. They included resin cement and respective primer, dedicated to zirconia: Clearfil Ceramic Primer/Panavia F2.0, Monobond Plus/Multilink Automix, AZ - Primer/ResiCem, Z - Prime Plus/Duo-Link. In each group the protocol of cementation was as follows: application of primer to the zirconia surface and application of the respective resin cement in cylindric mold (dimensions: 3.0 mm height and 3.0 mm diameter). Then, the shear bond strength was evaluated and the failure type was assessed in lupes (×2.5 magnification), also random specimens under SEM. The Wilcoxon test was used to analyze the data, the level of significance was α = 0.05. Finally, the known chemical composition of each primer was analysed in reference to probable chemical bonds, which may occure between primers and zirconia. The mean shear bond strength between resin cements and zirconia was the highest for Z-Prime Plus/Duo-Link (8.24 ± 3,21 MPa) and lowest for Clearfil Ceramic Primer/Panavia F 2.0 (4.60 ± 2.21 MPa). The analysis revealed significant difference between all groups, except pair Clearfil Ceramic Primer/Panavia F 2.0 and AZ-Primer/ResiCem. The failure type in groups of Clearfil Ceramic Primer/Panavia F 2.0 and AZ-Primer/ResiCem was mainly adhesive, in groups Monobond Plus/ /Multilink Automix and Z-Prime Plus/Duo-Link mainly mixed. The chemical composition of primers affects different bond mechanisms between resin cements and zirconia. The highest shear bond strength of resin cement to zirconia can be obtained for the primer composed of 10-Methacryloyloxydecyl dihydrogen

  10. Mapping lipid and collagen by multispectral photoacoustic imaging of chemical bond vibration

    Science.gov (United States)

    Wang, Pu; Wang, Ping; Wang, Han-Wei; Cheng, Ji-Xin

    2012-09-01

    Photoacoustic microscopy using vibrational overtone absorption as a contrast mechanism allows bond-selective imaging of deep tissues. Due to the spectral similarity of molecules in the region of overtone vibration, it is difficult to interrogate chemical components using photoacoustic signal at single excitation wavelength. Here we demonstrate that lipids and collagen, two critical markers for many kinds of diseases, can be distinguished by multispectral photoacoustic imaging of the first overtone of C-H bond. A phantom consisting of rat-tail tendon and fat was constructed to demonstrate this technique. Wavelengths between 1650 and 1850 nm were scanned to excite both the first overtone and combination bands of C-H bonds. B-scan multispectral photoacoustic images, in which each pixel contains a spectrum, were analyzed by a multivariate curve resolution-alternating least squares algorithm to recover the spatial distribution of collagen and lipids in the phantom.

  11. Studying Chemical Reactions, One Bond at a Time, with Single Molecule AFM Techniques

    Science.gov (United States)

    Fernandez, Julio M.

    2008-03-01

    The mechanisms by which mechanical forces regulate the kinetics of a chemical reaction are unknown. In my lecture I will demonstrate how we use single molecule force-clamp spectroscopy and protein engineering to study the effect of force on the kinetics of thiol/disulfide exchange. Reduction of disulfide bond via the thiol/disulfide exchange chemical reaction is crucial in regulating protein function and is of common occurrence in mechanically stressed proteins. While reduction is thought to proceed through a substitution nucleophilic bimolecular (SN2) reaction, the role of a mechanical force in modulating this chemical reaction is unknown. We apply a constant stretching force to single engineered disulfide bonds and measure their rate of reduction by dithiothreitol (DTT). We find that while the reduction rate is linearly dependent on the concentration of DTT, it is exponentially dependent on the applied force, increasing 10-fold over a 300 pN range. This result predicts that the disulfide bond lengthens by 0.34 å at the transition state of the thiol/disulfide exchange reaction. In addition to DTT, we also study the reduction of the engineered disulfide bond by the E. coli enzyme thioredoxin (Trx). Thioredoxins are enzymes that catalyze disulfide bond reduction in all organisms. As before, we apply a mechanical force in the range of 25-450 pN to the engineered disulfide bond substrate and monitor the reduction of these bonds by individual enzymes. In sharp contrast with the data obtained with DTT, we now observe two alternative forms of the catalytic reaction, the first requiring a reorientation of the substrate disulfide bond, causing a shortening of the substrate polypeptide by 0.76±0.07 å, and the second elongating the substrate disulfide bond by 0.21±0.01 å. These results support the view that the Trx active site regulates the geometry of the participating sulfur atoms, with sub-ångström precision, in order to achieve efficient catalysis. Single molecule

  12. Evidence for chemical bond formation at rubber-brass interface: Photoelectron spectroscopy study of bonding interaction between copper sulfide and model molecules of natural rubber

    Science.gov (United States)

    Ozawa, Kenichi; Mase, Kazuhiko

    2016-12-01

    Strong adhesion between rubber and brass has been considered to arise mainly from the mechanical interaction, which is characterized by dendritic interlocking at the interface. In order to examine a possible contribution of the chemical interaction, chemical state analysis was carried out for model molecules of natural rubber (2-methyl-2-butene and isoprene) adsorbed on Cu2S, a key chemical species for adhesion, by means of photoelectron spectroscopy (PES). Absence of a C 1s PES component associated with C=C bonds and the appearance of adsorption-induced components in the S 2p region indicate that the molecules interact with the Cu2S surface via the C=C bond to form C-S covalent bonds. This proves that the chemical interaction certainly plays a role in rubber-brass adhesion along with the mechanical interaction.

  13. Electrically Pumped Room-Temperature Pulsed InGaAsP-Si Hybrid Lasers Based on Metal Bonding

    Institute of Scientific and Technical Information of China (English)

    CHEN Ting; RAN Guang-Zhao; WANG Wei; QIN Guo-Gang; HONG Tao; PAN Jiao-Qing; CHEN Wei-Xi; CHENG Yuan-Bing; WANG Yang; MA Xiao-Bo; LIU Wei-Li; ZHAO Ling-Juan

    2009-01-01

    A pulsed InGaAsP-Si hybrid laser is fabricated using metal bonding.A novel structure in which the optical coupling and metal bonding areas are transversely separated is employed to integrate the silicon waveguide with an InGaAsP multi-quantum well distributed feedback structure.When electrically pumped at room temperature,the laser operates with a threshold current density of 2.9 kA/cm2 and a slope efficiency of 0.02 W/A.The 1542nm laser output exits mainly from the Si waveguide.

  14. Di-ureasil hybrids doped with LiBF4 : spectroscopic study of the ionic interactions and hydrogen bonding

    OpenAIRE

    Fernandes, Mariana; Barbosa, P. C.; Silva,Maria Manuela; Smith, Michael John; Zea Bermudez, V. de

    2011-01-01

    In the present work Fourier Transform infrared and Raman spectroscopy were used to characterize the cation/polymer, cation/cross-link, cation/anion and hydrogen bonding interactions in hybrid electrolytes composed of lithium tetrafluoroborate (LiBF4) and di-urea cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks (di-ureasils) designated as d-(2000) and d-U(600) and incorporating polyether chains with ca. 40.5 and 8.5 oxyethylene repeat units, respectively. Samples with ∞ > n ≥ 2.5 ...

  15. Sequential fault diagnosis for mechatronics system using diagnostic hybrid bond graph and composite harmony search

    Directory of Open Access Journals (Sweden)

    Ming Yu

    2015-12-01

    Full Text Available This article proposes a sequential fault diagnosis method to handle asynchronous distinct faults using diagnostic hybrid bond graph and composite harmony search. The faults under consideration include fault mode, abrupt fault, and intermittent fault. The faults can occur in different time instances, which add to the difficulty of decision making for fault diagnosis. This is because the earlier occurred fault can exhibit fault symptom which masks the fault symptom of latter occurred fault. In order to solve this problem, a sequential identification algorithm is developed in which the identification task is reactivated based on two conditions. The first condition is that the latter occurred fault has at least one inconsistent coherence vector element which is consistent in coherence vector of the earlier occurred fault, and the second condition is that the existing fault coherence vector has the ability to hide other faults and the second-level residual exceeds the threshold. A new composite harmony search which is capable of handling continuous variables and binary variables simultaneously is proposed for identification purpose. Experiments on a mobile robot system are conducted to assess the proposed sequential fault diagnosis algorithm.

  16. Thermally robust and biomolecule-friendly room-temperature bonding for the fabrication of elastomer-plastic hybrid microdevices.

    Science.gov (United States)

    Nguyen, T P O; Tran, B M; Lee, N Y

    2016-08-16

    Here, we introduce a simple and fast method for bonding a poly(dimethylsiloxane) (PDMS) silicone elastomer to different plastics. In this technique, surface modification and subsequent bonding processes are performed at room temperature. Furthermore, only one chemical is needed, and no surface oxidation step is necessary prior to bonding. This bonding method is particularly suitable for encapsulating biomolecules that are sensitive to external stimuli, such as heat or plasma treatment, and for embedding fracturable materials prior to the bonding step. Microchannel-fabricated PDMS was first oxidized by plasma treatment and reacted with aminosilane by forming strong siloxane bonds (Si-O-Si) at room temperature. Without the surface oxidation of the amine-terminated PDMS and plastic, the two heterogeneous substrates were brought into intimate physical contact and left at room temperature. Subsequently, aminolysis occurred, leading to the generation of a permanent seal via the formation of robust urethane bonds after only 5 min of assembling. Using this method, large-area (10 × 10 cm) bonding was successfully realized. The surface was characterized by contact angle measurements and X-ray photoelectron spectroscopy (XPS) analyses, and the bonding strength was analyzed by performing peel, delamination, leak, and burst tests. The bond strength of the PDMS-polycarbonate (PC) assembly was approximately 409 ± 6.6 kPa, and the assembly withstood the injection of a tremendous amount of liquid with the per-minute injection volume exceeding 2000 times its total internal volume. The thermal stability of the bonded microdevice was confirmed by performing a chamber-type multiplex polymerase chain reaction (PCR) of two major foodborne pathogens - Escherichia coli O157:H7 and Salmonella typhimurium - and assessing the possibility for on-site direct detection of PCR amplicons. This bonding method demonstrated high potential for the stable construction of closed microfluidic systems

  17. Investigation of Chemical Bond Properties and Mssbauer Spectroscopy in YBa2Cu3O7

    Institute of Scientific and Technical Information of China (English)

    高发明; 李东春; 张思远

    2003-01-01

    Chemical bond properties of YBa2Cu3O7 were studied by using the average band-gap model. The calculated results show that the covalency of Cu(1)-O bond is 0.406, and one of Cu(2)-O is 0.276. Mssbauer isomer shifts of 57Fe in Y-123 were calculated by the chemical surrounding factor hv defined by covalency and electronic polarizability. The charge-state and site of Fe were determined. The relation between the coupling constant of electron-phonon interaction and covalency is employed to explain that the Cu(2)-O plane is more important than the Cu(1)-O chain on the superconductivity in the Y-123 compounds.

  18. Detection of sub-GeV Dark Matter and Solar Neutrinos via Chemical-Bond Breaking

    CERN Document Server

    Essig, Rouven; Slone, Oren; Volansky, Tomer

    2016-01-01

    We explore a new low-threshold direct-detection concept for dark matter, based on the breaking of chemical bonds between atoms. This includes the dissociation of molecules and the creation of defects in a lattice. With thresholds of a few to 10's of eV, such an experiment could probe the nuclear couplings of dark matter particles as light as a few MeV. We calculate the expected rates for dark matter to break apart diatomic molecules, which we take as a case study for more general systems. We briefly mention ideas for how chemical-bond breaking might be detected in practice. We also discuss the possibility of detecting solar neutrinos, including pp neutrinos, with this experimental concept. With an event rate of $\\mathcal{O}$(0.1/kg-year), large exposures are required, but measuring low-energy solar neutrinos would provide a crucial test of the solar model.

  19. Chemical bonding and charge density distribution analysis of undoped and lanthanum doped barium titanate ceramics

    Indian Academy of Sciences (India)

    J MANGAIYARKKARASI; R SARAVANAN; MUKHLIS M ISMAIL

    2016-12-01

    A-site deficient, Lanthanum substituted Ba1−xLa2x/3TiO3 (x=0.000, 0.005, 0.015, 0.020 and 0.025) ceramics have been synthesized by chemical route. The effects of lanthanum dopant on the BaTiO3 lattice and the electron density distributions in the unit cell of the samples were investigated. Structural studies suggested the reduction in cell parameters and shrinkage in cell volume with the increase in lanthanum content. Chemical bonding and electron density distributions were examined through high resolution maximum entropy method (MEM). The mid bond electron density values revealed the enhancement of covalent nature between titanium and oxygen ions and predominant ionic nature between barium and oxygen ions. Average grain sizes were estimated for the undoped and doped samples. SEM investigations showed the existence of smaller grains with large voids in between them.

  20. Chemical bonding and aromaticity in trinuclear transition-metal halide clusters.

    Science.gov (United States)

    Weck, Philippe F; Sergeeva, Alina P; Kim, Eunja; Boldyrev, Alexander I; Czerwinski, Kenneth R

    2011-02-07

    Trinuclear transition-metal complexes such as Re(3)X(9) (X = Cl, Br, I), with their uniquely featured structure among metal halides, have posed intriguing questions related to multicenter electron delocalization for several decades. Here we report a comprehensive study of the technetium halide clusters [Tc(3)(μ-X)(3)X(6)](0/1-/2-) (X = F, Cl, Br, I), isomorphous with their rhenium congeners, predicted from density functional theory calculations. The chemical bonding and aromaticity in these clusters are analyzed using the recently developed adaptive natural density partitioning method, which indicates that only [Tc(3)X(9)](2-) clusters exhibit aromatic character, stemming from a d-orbital-based π bond delocalized over the three metal centers. We also show that standard methods founded on the nucleus-independent chemical shift concept incorrectly predict the neutral Tc(3)X(9) clusters to be aromatic.

  1. Developing density functional theory for Bose-Einstein condensates. The case of chemical bonding

    Energy Technology Data Exchange (ETDEWEB)

    Putz, Mihai V., E-mail: mvputz@cbg.uvt.ro [Laboratory of Physical and Computational Chemistry, Chemistry Department, West University of Timisoara, Str. Pestalozzi No. 16, 300115 Timisoara, Romania and Theoretical Physics Institute, Free University Berlin, Arnimallee 14, 14195 Berlin (Germany)

    2015-01-22

    Since the nowadays growing interest in Bose-Einstein condensates due to the expanded experimental evidence on various atomic systems within optical lattices in weak and strong coupling regimes, the connection with Density Functional Theory is firstly advanced within the mean field framework at three levels of comprehension: the many-body normalization condition, Thomas-Fermi limit, and the chemical hardness closure with the inter-bosonic strength and universal Hohenberg-Kohn functional. As an application the traditional Heitler-London quantum mechanical description of the chemical bonding for homopolar atomic systems is reloaded within the non-linear Schrödinger (Gross-Pitaevsky) Hamiltonian; the results show that a two-fold energetic solution is registered either for bonding and antibonding states, with the bosonic contribution being driven by the square of the order parameter for the Bose-Einstein condensate density in free (gas) motion, while the associate wave functions remain as in classical molecular orbital model.

  2. The nature of resonance-assisted hydrogen bonds: a quantum chemical topology perspective.

    Science.gov (United States)

    Guevara-Vela, José Manuel; Romero-Montalvo, Eduardo; Costales, Aurora; Pendás, Ángel Martín; Rocha-Rinza, Tomás

    2016-10-14

    Resonance Assisted Hydrogen Bonds (RAHBs) are particularly strong H-Bonds (HBs) which are relevant in several fields of chemistry. The traditional explanation for the occurrence of these HBs is built on mesomeric structures evocative of electron delocalisation in the system. Nonetheless, there are several theoretical studies which have found no evidence of such electron delocalisation. We considered the origin of RAHBs by employing Quantum Chemical Topology tools, more specifically, the Quantum Theory of Atoms in Molecules (QTAIM) and the Interacting Quantum Atoms energy partition. Our results indicate that the π-conjugated bonds allow for a larger adjustment of electron density throughout the H-bonded system as compared with non-conjugated carbonyl molecules. This rearrangement of charge distribution is a response to the electric field due to the H atom involved in the hydrogen bonding of the considered compounds. As opposed to the usual description of RAHB interactions, these HBs lead to a larger electron localisation in the system, and concomitantly to larger QTAIM charges which in turn lead to stronger electrostatic, polarization and charge transfer components of the interaction. Overall, the results presented here offer a new perspective on the cause of strengthening of these important interactions.

  3. Effect of raw material ratios on the compressive strength of magnesium potassium phosphate chemically bonded ceramics.

    Science.gov (United States)

    Wang, Ai-juan; Yuan, Zhi-long; Zhang, Jiao; Liu, Lin-tao; Li, Jun-ming; Liu, Zheng

    2013-12-01

    The compressive strength of magnesium potassium phosphate chemically bonded ceramics is important in biomedical field. In this work, the compressive strength of magnesium potassium phosphate chemically bonded ceramics was investigated with different liquid-to-solid and MgO-to-KH2PO4 ratios. X-ray diffractometer was applied to characterize its phase composition. The microstructure was imaged using a scanning electron microscope. The results showed that the compressive strength of the chemically bonded ceramics increased with the decrease of liquid-to-solid ratio due to the change of the packing density and the crystallinity of hydrated product. However, with the increase of MgO-to-KH2PO4 weight ratio, its compressive strength increased firstly and then decreased. The low compressive strength in lower MgO-to-KH2PO4 ratio might be explained by the existence of the weak phase KH2PO4. However, the low value of compressive strength with the higher MgO-to-KH2PO4 ratio might be caused by lack of the joined phase in the hydrated product. Besides, it has been found that the microstructures were different in these two cases by the scanning electron microscope. Colloidal structure appeared for the samples with lower liquid-to-solid and higher MgO-to-KH2PO4 ratios possibly because of the existence of amorphous hydrated products. The optimization of both liquid-to-solid and MgO-to-KH2PO4 ratios was important to improve the compressive strength of magnesium potassium phosphate chemically bonded ceramics.

  4. Chemically bonded phosphate ceramics for radioactive and mixed waste solidification and stabilization

    Energy Technology Data Exchange (ETDEWEB)

    Wagh, A.S.; Cunnane, J.C.; Singh, D.; Reed, D.T.; Armstrong, S.; Subhan, W.; Chawla, N.

    1993-01-01

    Results of an initial investigation of low temperature setting chemically bonded magnesium ammonium phosphate (MAP) ceramics as waste form materials, for solidification and stabilization of radioactive and mixed waste, are reported. The suitability of MAP for solidifying and encapsulating waste materials was tested by encapsulating zeolites at loadings up to [approximately]50 wt%. The resulting composites exhibited very good compressive strength characteristics. Microstructure studies show that zeolite grains remain unreacted in the matrix. Potential uses for solidifying and stab wastes are discussed.

  5. Chemically bonded phosphate ceramics for radioactive and mixed waste solidification and stabilization

    Energy Technology Data Exchange (ETDEWEB)

    Wagh, A.S.; Cunnane, J.C.; Singh, D.; Reed, D.T.; Armstrong, S.; Subhan, W.; Chawla, N.

    1993-01-01

    Results of an initial investigation of low temperature setting chemically bonded magnesium ammonium phosphate (MAP) ceramics as waste form materials, for solidification and stabilization of radioactive and mixed waste, are reported. The suitability of MAP for solidifying and encapsulating waste materials was tested by encapsulating zeolites at loadings up to {approximately}50 wt%. The resulting composites exhibited very good compressive strength characteristics. Microstructure studies show that zeolite grains remain unreacted in the matrix. Potential uses for solidifying and stab wastes are discussed.

  6. Multi-layered, chemically bonded lithium-ion and lithium/air batteries

    Energy Technology Data Exchange (ETDEWEB)

    Narula, Chaitanya Kumar; Nanda, Jagjit; Bischoff, Brian L; Bhave, Ramesh R

    2014-05-13

    Disclosed are multilayer, porous, thin-layered lithium-ion batteries that include an inorganic separator as a thin layer that is chemically bonded to surfaces of positive and negative electrode layers. Thus, in such disclosed lithium-ion batteries, the electrodes and separator are made to form non-discrete (i.e., integral) thin layers. Also disclosed are methods of fabricating integrally connected, thin, multilayer lithium batteries including lithium-ion and lithium/air batteries.

  7. Multi-layered, chemically bonded lithium-ion and lithium/air batteries

    Science.gov (United States)

    Narula, Chaitanya Kumar; Nanda, Jagjit; Bischoff, Brian L; Bhave, Ramesh R

    2014-05-13

    Disclosed are multilayer, porous, thin-layered lithium-ion batteries that include an inorganic separator as a thin layer that is chemically bonded to surfaces of positive and negative electrode layers. Thus, in such disclosed lithium-ion batteries, the electrodes and separator are made to form non-discrete (i.e., integral) thin layers. Also disclosed are methods of fabricating integrally connected, thin, multilayer lithium batteries including lithium-ion and lithium/air batteries.

  8. Electronic structure and chemical bonding in LaIrSi-type intermetallics

    Energy Technology Data Exchange (ETDEWEB)

    Matar, Samir F. [Bordeaux Univ., Pessac (France). CNRS; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Nakhl, Michel [Univ. Libanaise, Fanar (Lebanon). Ecole Doctorale Sciences et Technologies

    2017-05-01

    The cubic LaIrSi type has 23 representatives in aluminides, gallides, silicides, germanides, phosphides, and arsenides, all with a valence electron count of 16 or 17. The striking structural motif is a three-dimensional network of the transition metal (T) and p element (X) atoms with TX{sub 3/3} respectively XT{sub 3/3} coordination. Alkaline earth or rare earth atoms fill cavities within the polyanionic [TX]{sup δ-} networks. The present work presents a detailed theoretical study of chemical bonding in LaIrSi-type representatives, exemplarily for CaPtSi, BaIrP, BaAuGa, LaIrSi, CeRhSi, and CeIrSi. DFT-GGA-based electronic structure calculations show weakly metallic compounds with itinerant small magnitude DOSs at E{sub F} except for CeRhSi whose large Ce DOS at E{sub F} leads to a finite magnetization on Ce (0.73 μ{sub B}) and induced small moments of opposite sign on Rh and Si in a ferromagnetic ground state. The chemical bonding analyses show dominant bonding within the [TX]{sup δ-} polyanionic networks. Charge transfer magnitudes were found in accordance with the course of the electronegativites of the chemical constituents.

  9. Enhancing prospective chemistry teachers cognitive structures in the topics of bonding and hybridization by internet-assisted chemistry applications

    OpenAIRE

    Özge Özyalçın Oskay, Sinem Dinçol

    2011-01-01

    The purpose of this study is to determine the effects of internet-assisted chemistry applications on prospective chemistry teachers’ cognitive structures in the topics of bonding and hybridization. The sample of the study consisted of 36 prospective chemistry teachers attending Hacettepe University, Faculty of Education, the Department of Chemistry Education in 2010-2011 academic year and taking Basic Chemistry I lesson. In the study, students were separated into experimental and control gr...

  10. Non-standard tests for process control in chemically bonded sands

    Directory of Open Access Journals (Sweden)

    S. Ramrattan

    2016-01-01

    Full Text Available Chemically bonded sand cores and molds are more commonly referred to as precision sand systems in the high production automotive powertrain sector. Their behavior in contact with molten metal can lead to casting defects. Consequently, the interaction is of great interest and an important part of metal casting technology. The American Foundry Society (AFS sand testing is based on physical, mechanical, thermal and chemical properties of the sand system. Foundry engineers have long known that certain AFS sand tests provide limited information regarding control of molding and casting quality. The inadequacy is due to the fact that sand casting processes are inherently thermo-mechanical, thermo-chemical and thermo-physical. Non-standard foundry sand testing has proven useful for laboratory measurement of these characteristics in foundry sand using a disc-shaped specimen. Similarly, the equivalent disc-shaped specimens are used for casting trials. In order to accomplish near-net-shape casting with minimal defects, it is necessary to understand both the properties of the sand system, as well as the interface of molten metal when different binders, additives and/or refractory coatings are used. The methodology for the following non-standard chemically bonded sand tests is described: (1 disc transverse; (2 impact; (3 modified permeability; (4 abrasion; (5 thermal distortion; (6 quick loss on ignition. The data related to the non-standard sand tests were analyzed and interpreted. The test results indicate that there is relatively lower test-to-test variability with the disc-shaped specimens. The non-standard tests were able to discriminate between the chemically bonded polyurethane cold box sand specimens. Further studies should be conducted on various other sand and binder systems as well as on different specimen thicknesses.

  11. Non-standard tests for process control in chemically bonded sands

    Directory of Open Access Journals (Sweden)

    S. Ramrattan

    2016-01-01

    Full Text Available Chemically bonded sand cores and molds are more commonly referred to as precision sand systems in the high production automotive powertrain sector. Their behavior in contact with molten metal can lead to casting defects. Consequently, the interaction is of great interest and an important part of metal casting technology. The American Foundry Society (AFS sand testing is based on physical, mechanical, thermal and chemical properties of the sand system. Foundry engineers have long known that certain AFS sand tests provide limited information regarding control of molding and casting quality. The inadequacy is due to the fact that sand casting processes are inherently thermo-mechanical, thermo-chemical and thermo-physical. Non-standard foundry sand testing has proven useful for laboratory measurement of these characteristics in foundry sand using a disc-shaped specimen. Similarly, the equivalent disc-shaped specimens are used for casting trials. In order to accomplish near-net-shape casting with minimal defects, it is necessary to understand both the properties of the sand system, as well as the interface of molten metal when different binders, additives and/or refractory coatings are used. The methodology for the following non-standard chemically bonded sand tests is described: (1 disc transverse; (2 impact; (3 modified permeability; (4 abrasion; (5 thermal distortion; (6 quick loss on ignition. The data related to the non-standard sand tests were analyzed and interpreted. The test results indicate that there is relatively lower test-to-test variability with the disc-shaped specimens. The non-standard tests were able to discriminate between the chemically bonded polyurethane cold box sand specimens. Further studies should be conducted on various other sand and binder systems as well as on different specimen thicknesses.

  12. Effect of surface treatments on the tensile bond strength of repaired water-aged anterior restorative micro-fine hybrid resin composite.

    Science.gov (United States)

    Fawzy, Amr S; El-Askary, Farid S; Amer, Mohamed A

    2008-12-01

    The purpose of this study was to characterize changes in surface topography associated with different surface treatments and their effect on tensile bond strength (TBS) of repaired water-aged anterior restorative micro-fine hybrid resin composite. The TBS of repaired resin-based composite slabs either non-treated or exposed to different mechanical and/or chemical surface treatment procedures were measured. The cohesive tensile strength of non-repaired intact slabs was used as a control group. The topographical effects of acid etching, grinding, and grinding followed by acid etching were characterized by AFM and SEM. All repaired groups showed significantly lower TBS than the control group. The TBS of repaired groups was ranged from 15% to 59% of the cohesive tensile strength of the control group (18.8+/-4.5MPa). The surface roughness of the non-treated aged specimens was significantly higher than other treated specimens. Specimens treated by acid etching showed significant increase in surface area compared to the non-treated and treated specimens. Aging process resulted in the formation of degradable surface layer which adversely affects the repair bond strength. The use of silane primer prior to the application of the adhesive after mechanical grinding, with or without the use of 37% phosphoric acid etching; improves the repair bond strength.

  13. Hybridization morphology and dentin bond stability of self-etch primers with different ethanol/water ratios.

    Science.gov (United States)

    Fontes, Silvia T; Lima, Giana S; Ogliari, Fabrício A; Piva, Evandro; Moraes, Rafael R

    2012-07-01

    This study evaluated the influence of ethanol/water ratios on the bond strength to dentin of experimental two-step, self-etch adhesive systems. Self-etch primers were prepared with constant 40 mass % of solvents. The ethanol/water ratios tested were 7:1 (P1), 3:1 (P2), and 1:1 (P3); primers with only ethanol (PE) or water (PW) as solvent were also tested. The bond strength to the dentin was investigated through a microtensile bond strength test. Resin-dentin beam-shaped specimens were obtained and tested after 24 h, 6 months, and 1 year of storage in water at 37°C. The hybridization morphology was analyzed using SEM. For bond strength at 24 h, PE = P1, P1 = P2, and P2, P3 and PW > PE. After 6 months, PE = P1 6 months = 1 year. For P2, P3 and PW, 24 h = 6 months > 1 year. For PE and P1, adhesive failures were predominant at 24 h, mixed or adhesive failures after 6 months, and premature debonding was predominant after 1 year. For P2, mixed failures were predominant at 24 h and 6 months, and premature debonding after 1 year. For P3 and PW, mixed failures were predominant at all storage periods. The SEM analysis revealed no clear differences in the hybridization patterns yielded by the water-based primers; PE showed formation of irregular resin tags.

  14. Structure and Chemical Bond of Thermoelectric Ce-Co-Sb Skutterudites

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The correlations among composition,structure,chemical bond and thermoelectric property of skutterudites CoSb3 and CeCo5Fe3Sb12 have been studied by using density function and discrete variation (DFT-DVM) method.Three models for this study were proposed and calculated by which the "rattling" pattern was described.Model 1 is with Ce in the center,model 2 is with Ce away the center and near to Sb,and model 3 is also with Ce away the center but near to Fe.The calculated results show that in model 3,the ionic bond is the strongest,but the covalent bond is the weakest.Due to the different changes between ionic and covalent bond,there is less difference in the stability among the models 1,2 and 3.Therefore,these different models can exist at the same time,or can translate from one to another more easily.In other words,the "rattling" pattern has taken place.Unfilled model of CoSb3,without Ce and Fe,is called model 4.The covalent bond of Co-Sb or Fe-Sb in models 1,2 and 3 is weaker than that of Co-Sb in model 4,as some electrical cloud of Sb takes part in the covalent bond of Ce-Sb in the filled models.The result is consistent with the experimental result that the thermal conductivity of CeCo5Fe3Sb12 is lower than that of CoSb3,and the thermoelectric property of CeCo5Fe3Sb12 is superior to that of CoSb3.

  15. Four chemical methods of porcelain conditioning and their influence over bond strength and surface integrity

    Science.gov (United States)

    Stella, João Paulo Fragomeni; Oliveira, Andrea Becker; Nojima, Lincoln Issamu; Marquezan, Mariana

    2015-01-01

    OBJECTIVE: To assess four different chemical surface conditioning methods for ceramic material before bracket bonding, and their impact on shear bond strength and surface integrity at debonding. METHODS: Four experimental groups (n = 13) were set up according to the ceramic conditioning method: G1 = 37% phosphoric acid etching followed by silane application; G2 = 37% liquid phosphoric acid etching, no rinsing, followed by silane application; G3 = 10% hydrofluoric acid etching alone; and G4 = 10% hydrofluoric acid etching followed by silane application. After surface conditioning, metal brackets were bonded to porcelain by means of the Transbond XP system (3M Unitek). Samples were submitted to shear bond strength tests in a universal testing machine and the surfaces were later assessed with a microscope under 8 X magnification. ANOVA/Tukey tests were performed to establish the difference between groups (α= 5%). RESULTS: The highest shear bond strength values were found in groups G3 and G4 (22.01 ± 2.15 MPa and 22.83 ± 3.32 Mpa, respectively), followed by G1 (16.42 ± 3.61 MPa) and G2 (9.29 ± 1.95 MPa). As regards surface evaluation after bracket debonding, the use of liquid phosphoric acid followed by silane application (G2) produced the least damage to porcelain. When hydrofluoric acid and silane were applied, the risk of ceramic fracture increased. CONCLUSIONS: Acceptable levels of bond strength for clinical use were reached by all methods tested; however, liquid phosphoric acid etching followed by silane application (G2) resulted in the least damage to the ceramic surface. PMID:26352845

  16. Four chemical methods of porcelain conditioning and their influence over bond strength and surface integrity

    Directory of Open Access Journals (Sweden)

    João Paulo Fragomeni Stella

    2015-08-01

    Full Text Available OBJECTIVE: To assess four different chemical surface conditioning methods for ceramic material before bracket bonding, and their impact on shear bond strength and surface integrity at debonding.METHODS: Four experimental groups (n = 13 were set up according to the ceramic conditioning method: G1 = 37% phosphoric acid etching followed by silane application; G2 = 37% liquid phosphoric acid etching, no rinsing, followed by silane application; G3 = 10% hydrofluoric acid etching alone; and G4 = 10% hydrofluoric acid etching followed by silane application. After surface conditioning, metal brackets were bonded to porcelain by means of the Transbond XP system (3M Unitek. Samples were submitted to shear bond strength tests in a universal testing machine and the surfaces were later assessed with a microscope under 8 X magnification. ANOVA/Tukey tests were performed to establish the difference between groups (α= 5%.RESULTS: The highest shear bond strength values were found in groups G3 and G4 (22.01 ± 2.15 MPa and 22.83 ± 3.32 Mpa, respectively, followed by G1 (16.42 ± 3.61 MPa and G2 (9.29 ± 1.95 MPa. As regards surface evaluation after bracket debonding, the use of liquid phosphoric acid followed by silane application (G2 produced the least damage to porcelain. When hydrofluoric acid and silane were applied, the risk of ceramic fracture increased.CONCLUSIONS: Acceptable levels of bond strength for clinical use were reached by all methods tested; however, liquid phosphoric acid etching followed by silane application (G2 resulted in the least damage to the ceramic surface.

  17. Design Hybrid Methods for Encoding Prior Knowledge in Feedforward Network with Application in Chemical Engineering

    Institute of Scientific and Technical Information of China (English)

    CHENChongwei; CHENDezhao

    2002-01-01

    Three-layer feedforward networks have been widely used in modeling chemical engineering processes and prior-knowledge-based methods have been introduced to improve their performances.In this paper,we propose the methodology of designing better prior-knowledge-based hybrid methods by combining the existing ones. Then according to this methodology,two hybrid methods,interpolation-optimization (IO) method and interpolation penalty-function (IPF) method,are designed as examples.Finally,both methods are applied to modeling two cases in chemical engineering to investigate their effectiveness.Simulation results show that the performances of the hybrid methods are better than those of their parents.

  18. Combustion flame-plasma hybrid reactor systems, and chemical reactant sources

    Science.gov (United States)

    Kong, Peter C

    2013-11-26

    Combustion flame-plasma hybrid reactor systems, chemical reactant sources, and related methods are disclosed. In one embodiment, a combustion flame-plasma hybrid reactor system comprising a reaction chamber, a combustion torch positioned to direct a flame into the reaction chamber, and one or more reactant feed assemblies configured to electrically energize at least one electrically conductive solid reactant structure to form a plasma and feed each electrically conductive solid reactant structure into the plasma to form at least one product is disclosed. In an additional embodiment, a chemical reactant source for a combustion flame-plasma hybrid reactor comprising an elongated electrically conductive reactant structure consisting essentially of at least one chemical reactant is disclosed. In further embodiments, methods of forming a chemical reactant source and methods of chemically converting at least one reactant into at least one product are disclosed.

  19. Electronic Structure and Chemical Bond of Ti3SiC2 and Adding Al Element

    Institute of Scientific and Technical Information of China (English)

    MIN Xinmin; LU Ning; MEI Bingchu

    2006-01-01

    The relation among electronic structure, chemical bond and property of Ti3SiC2 and Al-doped was studied by density function and discrete variation (DFT-DVM) method. When Al element is added into Ti3SiC2, there is a less difference of ionic bond, which does not play a leading role to influent the properties. After adding Al, the covalent bond of Al and the near Ti becomes somewhat weaker, but the covalent bond of Al and the Si in the same layer is obviously stronger than that of Si and Si before adding. Therefore, in preparation of Ti3SiC2, adding a proper quantity of Al can promote the formation of Ti3SiC2. The density of state shows that there is a mixed conductor character in both of Ti3SiC2 and adding Al element. Ti3SiC2 is with more tendencies to form a semiconductor. The total density of state near Fermi lever after adding Al is larger than that before adding, so the electric conductivity may increase after adding Al.

  20. Weak Intermolecular Hydrogen Bonds with Fluorine: Detection and Implications for Enzymatic/Chemical Reactions, Chemical Properties, and Ligand/Protein Fluorine NMR Screening.

    Science.gov (United States)

    Dalvit, Claudio; Vulpetti, Anna

    2016-05-23

    It is known that strong hydrogen-bonding interactions play an important role in many chemical and biological systems. However, weak or very weak hydrogen bonds, which are often difficult to detect and characterize, may also be relevant in many recognition and reaction processes. Fluorine serving as a hydrogen-bond acceptor has been the subject of many controversial discussions and there are different opinions about it. It now appears that there is compelling experimental evidence for the involvement of fluorine in weak intramolecular or intermolecular hydrogen bonds. Using established NMR methods, we have previously characterized and measured the strengths of intermolecular hydrogen-bond complexes involving the fluorine moieties CH2 F, CHF2 , and CF3 , and have compared them with the well-known hydrogen-bond complex formed between acetophenone and the strong hydrogen-bond donor p-fluorophenol. We now report evidence for the formation of hydrogen bonds involving fluorine with significantly weaker donors, namely 5-fluoroindole and water. A simple NMR method is proposed for the simultaneous measurement of the strengths of hydrogen bonds between an acceptor and a donor or water. Important implications of these results for enzymatic/chemical reactions involving fluorine, for chemical and physical properties, and for ligand/protein (19) F NMR screening are analyzed through experiments and theoretical simulations.

  1. Synthesis of chemically bonded graphene/carbon nanotube composites and their application in large volumetric capacitance supercapacitors.

    Science.gov (United States)

    Jung, Naeyoung; Kwon, Soongeun; Lee, Dongwook; Yoon, Dong-Myung; Park, Young Min; Benayad, Anass; Choi, Jae-Young; Park, Jong Se

    2013-12-17

    Chemically bonded graphene/carbon nanotube composites as flexible supercapacitor electrode materials are synthesized by amide bonding. Carbon nanotubes attached along the edges and onto the surface of graphene act as spacers to increase the electrolyte-accessible surface area. Our lamellar structure electrodes demonstrate the largest volumetric capacitance (165 F cm(-3) ) ever shown by carbon-based electrodes.

  2. Electronic Structures and Chemical Bonds of Cobaltite and Ni-Doped

    Institute of Scientific and Technical Information of China (English)

    MIN Xinmin; XING Xueling; ZHU Lei

    2005-01-01

    The relation among electronic structure, chemical bond and thermoelectric property of Ca3 Co2 O6 and Ni-doped was studied by density function theory and discrete variation method(DFT-DVM). The results indicate that the highest valence band (HVB) and the lowest conduction band(LCB) are mainly attributed to Co3 d, Ni3 d and O2 p atomic orbitals. The property of a semiconductor is shown from the gap between HVB and LCB. The gap of Ni-doped one is less than that of Ca3 Co2 O6. The non-metal bond or ceramic characteristic of Ni-doped one is weaker than that of Ca3 Co2 O6, but the metal characteristics of Ni-doped one are stronger than those of Ca3 Co2O6. The thermoelectric property should be improved by adding Ni element into the system of Ca3 Co2 O6.

  3. YNi and its hydrides: Phase stabilities, electronic structures and chemical bonding properties from first principles

    Energy Technology Data Exchange (ETDEWEB)

    Matar, S.F., E-mail: matar@icmcb-bordeaux.cnrs.fr [CNRS, Universite de Bordeaux, ICMCB, 87 avenue du Docteur Albert Schweitzer, F-33608 Pessac (France); Nakhl, M. [Universite Libanaise, Laboratoire de Chimie-Physique des Materiaux LCPM, Fanar (Lebanon); Al Alam, A.F.; Ouaini, N. [Universite Saint-Esprit de Kaslik, Faculte des Sciences et de Genie Informatique, Jounieh (Lebanon); Chevalier, B. [CNRS, Universite de Bordeaux, ICMCB, 87 avenue du Docteur Albert Schweitzer, F-33608 Pessac (France)

    2010-11-25

    Graphical abstract: Base centered orthorhombic YNiH{sub X} structure. For x = 3, only H1 and H2 are present. Highest hydrogen content YNiH{sub 4} is obtained when H3 are added. - Abstract: Within density functional theory, establishing the equations of states of YNi in two different controversial structures in the literature, leads to determine the orthorhombic FeB-type as the ground state one with small energy difference. For YNiH{sub 3} and YNiH{sub 4} hydrides crystallizing in the orthorhombic CrB-type structure the geometry optimization and the ab initio determination of the H atomic positions show that the stability of hydrogen decreases from the tri- to the tetra- hydride. New states brought by hydrogen within the valence band lead to its broadening and to enhanced localization of metal density of states. The chemical bonding analysis shows a preferential Ni-H bonding versus Y-H.

  4. LOBSTER: A tool to extract chemical bonding from plane-wave based DFT.

    Science.gov (United States)

    Maintz, Stefan; Deringer, Volker L; Tchougréeff, Andrei L; Dronskowski, Richard

    2016-04-30

    The computer program LOBSTER (Local Orbital Basis Suite Towards Electronic-Structure Reconstruction) enables chemical-bonding analysis based on periodic plane-wave (PAW) density-functional theory (DFT) output and is applicable to a wide range of first-principles simulations in solid-state and materials chemistry. LOBSTER incorporates analytic projection routines described previously in this very journal [J. Comput. Chem. 2013, 34, 2557] and offers improved functionality. It calculates, among others, atom-projected densities of states (pDOS), projected crystal orbital Hamilton population (pCOHP) curves, and the recently introduced bond-weighted distribution function (BWDF). The software is offered free-of-charge for non-commercial research. © 2016 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.

  5. Atom-specific look at the surface chemical bond using x-ray emission spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, A.; Wassdahl, N.; Weinelt, M. [Uppsala Univ. (Sweden)] [and others

    1997-04-01

    CO and N{sub 2} adsorbed on the late transition metals have become prototype systems regarding the general understanding of molecular adsorption. It is in general assumed that the bonding of molecules to transition metals can be explained in terms of the interaction of the frontier HOMO and LUMO molecular orbitals with the d-orbitals. In such a picture the other molecular orbitals should remain essentially the same as in the free molecule. For the adsorption of the isoelectronic molecules CO and N{sub 2} this has led to the so called Blyholder model i.e., a synergetic {sigma} (HOMO) donor and {pi} (LUMO) backdonation bond. The authors results at the ALS show that such a picture is oversimplified. The direct observation and identification of the states related to the surface chemical bond is an experimental challenge. For noble and transition metal surfaces, the adsorption induced states overlap with the metal d valence band. Their signature is therefore often obscured by bulk substrate states. This complication has made it difficult for techniques such as photoemission and inverse photoemission to provide reliable information on the energy of chemisorption induced states and has left questions unanswered regarding the validity of the frontier orbitals concept. Here the authors show how x-ray emission spectroscopy (XES), in spite of its inherent bulk sensitivity, can be used to investigate adsorbed molecules. Due to the localization of the core-excited intermediate state, XE spectroscopy allows an atomic specific separation of the valence electronic states. Thus the molecular contributions to the surface measurements make it possible to determine the symmetry of the molecular states, i.e., the separation of {pi} and {sigma} type states. In all the authors can obtain an atomic view of the electronic states involved in the formation of the chemical bond to the surface.

  6. Heteromolecular metal–organic interfaces: Electronic and structural fingerprints of chemical bonding

    Energy Technology Data Exchange (ETDEWEB)

    Stadtmüller, Benjamin; Schröder, Sonja [Peter Grünberg Institut (PGI-3), Forschungszentrum Jülich GmbH, D-52425 Jülich (Germany); Jülich-Aachen Research Alliance (JARA) – Fundamentals of Future Information Technology, 52425 Jülich (Germany); Kumpf, Christian, E-mail: c.kumpf@fz-juelich.de [Peter Grünberg Institut (PGI-3), Forschungszentrum Jülich GmbH, D-52425 Jülich (Germany); Jülich-Aachen Research Alliance (JARA) – Fundamentals of Future Information Technology, 52425 Jülich (Germany)

    2015-10-01

    Highlights: • We present a study of molecular donor–acceptor blends adsorbed on Ag(1 1 1). • Geometric and electronic structure of blends and pristine phases are compared. • The surface bonding of the acceptor is strengthened, that of the donor weakened. • But counter intuitively, the acceptor (donor) bond length becomes larger (smaller). • This contradiction is resolved by a model based on charge transfer via the surface. - Abstract: Beside the fact that they attract highest interest in the field of organic electronics, heteromolecular structures adsorbed on metal surfaces, in particular donor–acceptor blends, became a popular field in fundamental science, possibly since some surprising and unexpected behaviors were found for such systems. One is the apparent breaking of a rather fundamental rule in chemistry, namely that stronger chemical bonds go along with shorter bond lengths, as it is, e.g., well-known for the sequence from single to triple bonds. In this review we summarize the results of heteromolecular monolayer structures adsorbed on Ag(1 1 1), which – regarding this rule – behave in a counterintuitive way. The charge acceptor moves away from the substrate while its electronic structure indicates a stronger chemical interaction, indicated by a shift of the formerly lowest unoccupied molecular orbital toward higher binding energies. The donor behaves in the opposite way, it gives away charge, hence, electronically the bonding to the surface becomes weaker, but at the same time it also approaches the surface. It looks as if the concordant link between electronic and geometric structure was broken. But both effects can be explained by a substrate-mediated charge transfer from the donor to the acceptor. The charge reorganization going along with this transfer is responsible for both, the lifting-up of the acceptor molecule and the filling of its LUMO, and also for the reversed effects at the donor molecules. In the end, both molecules

  7. A constitutive model for bonded geomaterials subject to mechanical and/or chemical degradation

    Science.gov (United States)

    Nova, R.; Castellanza, R.; Tamagnini, C.

    2003-08-01

    The mechanical behaviour of bonded geomaterials is described by means of an elastoplastic strain-hardening model. The internal variables, taking into account the history of the material, depend on the plastic strains experienced and on a conveniently defined scalar measure of damage induced by weathering and/or chemical degradation.For the sake of simplicity, it is assumed that only internal variables are affected by mechanical and chemical history of the material. Despite this simplifying assumption, it can be shown that many interesting phenomena exhibited by weathered bonded geomaterials can be successfully described. For instance, (i) the transition from brittle to ductile behaviour with increasing pressure of a calcarenite with collapsing internal structure, (ii) the complex behaviour of chalk and other calcareous materials in oedometric tests, (iii) the chemically induced variation of the stress and strain state of such kind of materials, are all phenomena that can be qualitatively reproduced. Several comparisons with experimental data show that the model can capture the observed behaviour also quantitatively.

  8. An unexpected bridge between chemical bonding indicators and electrical conductivity through the localization tensor.

    Science.gov (United States)

    Pendás, Ángel Martín; Guevara-Vela, José Manuel; Crespo, Daniel Menéndez; Costales, Aurora; Francisco, Evelio

    2017-01-18

    While the modern theory of the insulating state shows that the conducting or insulating properties of a system can be extracted solely from the ground state properties via the so-called localization tensor (LT), no chemical reading of this important quantity has ever been offered. Here, a remarkable link between the LT and the bond orders as described by the delocalization indices (DIs) of chemical bonding theory is reported. This is achieved through a real space partition of the LT into intra- and interatomic contributions. We show that the convergence or divergence of the LT in the thermodynamic limit, which signals the insulating or conducting nature of an extended system, respectively, can be nailed down to DIs. This allows for the exploitation of traditional chemical intuition to identify essential and spectator atomic groups in determining electrical conductivity. The thermodynamic limit of the LT is controlled by the spatial decay rate of the interatomic DIs, exponential in insulators and power-law in conductors. Computational data of a few selected toy systems corroborate our results.

  9. The use of dialogic electronic journal writing to develop students' understanding of chemical bonding

    Science.gov (United States)

    English, Sarah Collard

    The intent of this study is to examine how the implementation of a dialogic electronic journal writing environment continues the development of students' understanding of chemistry, specifically chemical bonding, through written communication between the individual students and their chemistry teacher. This study is framed within a constructivist theoretical context where students' understanding is constructed through written discussions with the educator, the students' interaction with the classroom environment, and his/her interaction with the computer environment. The research design of collective case study was employed to allow multiple perspectives and processes conveyed by the participants to be examined in the context in which they occurred while considering multiple sources of information. Data sources included electronic journal entries, classroom artifacts, and semi-structured interviews. Data were analyzed using the constant comparative method, which involved coding, categorizing, and interpreting for patterns and relationships. Four cases were reported in detail. This study found that the dialogic electronic journal-writing environment was an effective venue in revealing previously undiscovered students' alternative conceptions of chemical bonding. Opportunities to actively confront and reconcile such conceptions were afforded through educator/student dialogic written interaction. The dialogic electronic journal-writing environment was also critical in the identification of gaps in students' conceptual understanding linked to improper sequencing of chemistry content. This study also found that the on-line environment provided the educator the opportunity to scaffold chemical bonding concepts to meet the needs of the students involved in the study. This study concluded that the dialogic electronic journal-writing environment positively contributed to the development of student understanding. These findings may have practical implications for teachers in

  10. Transgenic hybrid poplar for sustainable and scalable production of the commodity/specialty chemical, 2-phenylethanol.

    Directory of Open Access Journals (Sweden)

    Michael A Costa

    Full Text Available Fast growing hybrid poplar offers the means for sustainable production of specialty and commodity chemicals, in addition to rapid biomass production for lignocellulosic deconstruction. Herein we describe transformation of fast-growing transgenic hybrid poplar lines to produce 2-phenylethanol, this being an important fragrance, flavor, aroma, and commodity chemical. It is also readily converted into styrene or ethyl benzene, the latter being an important commodity aviation fuel component. Introducing this biochemical pathway into hybrid poplars marks the beginnings of developing a platform for a sustainable chemical delivery system to afford this and other valuable specialty/commodity chemicals at the scale and cost needed. These modified plant lines mainly sequester 2-phenylethanol via carbohydrate and other covalently linked derivatives, thereby providing an additional advantage of effective storage until needed. The future potential of this technology is discussed. MALDI metabolite tissue imaging also established localization of these metabolites in the leaf vasculature.

  11. Peptide Bond Synthesis by a Mechanism Involving an Enzymatic Reaction and a Subsequent Chemical Reaction.

    Science.gov (United States)

    Abe, Tomoko; Hashimoto, Yoshiteru; Zhuang, Ye; Ge, Yin; Kumano, Takuto; Kobayashi, Michihiko

    2016-01-22

    We recently reported that an amide bond is unexpectedly formed by an acyl-CoA synthetase (which catalyzes the formation of a carbon-sulfur bond) when a suitable acid and l-cysteine are used as substrates. DltA, which is homologous to the adenylation domain of nonribosomal peptide synthetase, belongs to the same superfamily of adenylate-forming enzymes, which includes many kinds of enzymes, including the acyl-CoA synthetases. Here, we demonstrate that DltA synthesizes not only N-(d-alanyl)-l-cysteine (a dipeptide) but also various oligopeptides. We propose that this enzyme catalyzes peptide synthesis by the following unprecedented mechanism: (i) the formation of S-acyl-l-cysteine as an intermediate via its "enzymatic activity" and (ii) subsequent "chemical" S → N acyl transfer in the intermediate, resulting in peptide formation. Step ii is identical to the corresponding reaction in native chemical ligation, a method of chemical peptide synthesis, whereas step i is not. To the best of our knowledge, our discovery of this peptide synthesis mechanism involving an enzymatic reaction and a subsequent chemical reaction is the first such one to be reported. This new process yields peptides without the use of a thioesterified fragment, which is required in native chemical ligation. Together with these findings, the same mechanism-dependent formation of N-acyl compounds by other members of the above-mentioned superfamily demonstrated that all members most likely form peptide/amide compounds by using this novel mechanism. Each member enzyme acts on a specific substrate; thus, not only the corresponding peptides but also new types of amide compounds can be formed.

  12. ELECTRONIC AND CHEMICAL PROPERTIES OF PD IN BIMETALLIC SYSTEMS: HOW MUCH DO WE KNOW ABOUT HETERONUCLEAR METAL-METAL BONDING?

    Energy Technology Data Exchange (ETDEWEB)

    RODRIGUEZ,J.A.

    2001-09-27

    The experimental and theoretical studies described above illustrate the complex nature of the heteronuclear metal-metal bond. In many cases, bimetallic bonding induces a significant redistribution of charge around the bonded metals. This redistribution of charge is usually linked to the strength of the bimetallic bond, affects the position of the core and valence levels of the metals, and can determine the chemical reactivity of the system under study. New concepts are emerging [22,23,34,36] and eventually the coupling of experiment and theory can be useful for designing more efficient bimetallic catalysts [98,106,107].

  13. Processing–structure–property relations of chemically bonded phosphate ceramic composites

    Indian Academy of Sciences (India)

    H A Colorado; C Hiel; H T Hahn

    2011-07-01

    Mechanical properties and microstructures of a chemically bonded phosphate ceramic (CBPC) and its composite with 1.0 wt% graphite nanoplatelets (GNPs) reinforcement have been investigated. Microstructure was identified by using optical and scanning electron microscopes, X-ray tomography, and X-ray diffraction. In addition, weight loss of the resin at room temperature was studied. The microstructure characterization shows that CBPC is itself a composite with several crystalline (wollastonite and brushite) and amorphous phases. SEM and micro tomography show a homogeneous distribution of crystalline phases. Bending and compression strength of the CBPC was improved by reducing bubbles via preparation in vacuum.

  14. Influence of chemical bonding on X-ray spectra of different aluminium compounds

    Energy Technology Data Exchange (ETDEWEB)

    Bonetto, Rita [Centro de Investigacion y Desarrollo en Ciencias Aplicadas Dr. Jorge Ronco, Calle 47 No. 257, CC 59, 1900 La Plata (Argentina) and Consejo Nacional de Investigaciones Cientificas y Tecnicas de la Republica Argentina (Argentina)]. E-mail: bonetto@quimica.unlp.edu.ar; Trincavelli, Jorge [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba, Ciudad Universitaria, 5000, Cordoba (Argentina) and Consejo Nacional de Investigaciones Cientificas y Tecnicas de la Republica Argentina (Argentina)]. E-mail: jorge@quechua.fis.uncor.edu; Vasconcellos, Marcos [Instituto de Fisica, Universidade Federal de Rio Grande do Sul, Campus do Vale, Av. Bento Goncalves 9500, CEP: 91501-970, Porto Alegre (Brazil)]. E-mail: marcos@if.ufrgs.br

    2005-11-15

    Five minerals containing aluminium in different crystal configurations are studied. The different kinds of chemical bonding between aluminium and oxygen originate molecular orbitals with energy levels and transition probabilities varying from one compound to another. This effect appears as shifts and changes in relative intensities of K{alpha} emission lines and as modifications of the K{beta} characteristic spectrum. In the present work, the aluminium K characteristic spectra obtained by means of an electron microprobe with a wavelength dispersive system are compared for topaz, albite, spodumene, biotite and corundum.

  15. A tutorial for understanding chemical reactivity through the valence bond approach.

    Science.gov (United States)

    Usharani, Dandamudi; Lai, Wenzhen; Li, Chunsen; Chen, Hui; Danovich, David; Shaik, Sason

    2014-07-21

    This is a tutorial on the usage of valence bond (VB) diagrams for understanding chemical reactivity in general, and hydrogen atom transfer (HAT) reactivity in particular. The tutorial instructs the reader how to construct the VB diagrams and how to estimate HAT barriers from raw data, starting with the simplest reaction H + H2 and going all the way to HAT in the enzyme cytochrome P450. Other reactions are treated as well, and some unifying principles are outlined. The tutorial projects the unity of reactivity treatments, following Coulson's dictum "give me insight, not numbers", albeit with its modern twist: giving numbers and insight.

  16. Trigermanides AEGe{sub 3} (AE = Ca, Sr, Ba). Chemical bonding and superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, Rodrigo; Schnelle, Walter; Baranov, Alexey I.; Burkhardt, Ulrich; Bobnar, Matej; Cardoso-Gil, Raul; Schwarz, Ulrich; Grin, Yuri [Max-Planck-Institut fuer Chemische Physik Fester Stoffe, Dresden (Germany)

    2016-08-01

    The crystal structures of the trigermanides AEGe{sub 3}(tI32) (AE = Ca, Sr, Ba; space group I4/mmm, for SrGe{sub 3}: a = 7.7873(1), c = 12.0622(3) Aa) comprise Ge{sub 2} dumbbells forming layered Ge substructures which enclose embedded AE atoms. The chemical bonding analysis by application of the electron localizability approach reveals a substantial charge transfer from the AE atoms to the germanium substructure. The bonding within the dumbbells is of the covalent two-center type. A detailed analysis of SrGe{sub 3} reveals that the interaction on the bond-opposite side of the Ge{sub 2} groups is not lone pair-like - as it would be expected from the Zintl-like interpretation of the crystal structure with anionic Ge layers separated by alkaline-earth cations - but multi-center strongly polar between the Ge{sub 2} dumbbells and the adjacent metal atoms. Similar atomic interactions are present in CaGe{sub 3} and BaGe{sub 3}. The variation of the alkaline-earth metal has a merely insignificant influence on the superconducting transition temperatures in the s,p-electron compounds AEGe{sub 3}.

  17. Enhancing prospective chemistry teachers cognitive structures in the topics of bonding and hybridization by internet-assisted chemistry applications

    Directory of Open Access Journals (Sweden)

    Özge Özyalçın Oskay, Sinem Dinçol

    2011-08-01

    Full Text Available The purpose of this study is to determine the effects of internet-assisted chemistry applications on prospective chemistry teachers’ cognitive structures in the topics of bonding and hybridization. The sample of the study consisted of 36 prospective chemistry teachers attending Hacettepe University, Faculty of Education, the Department of Chemistry Education in 2010-2011 academic year and taking Basic Chemistry I lesson. In the study, students were separated into experimental and control groups according to their pre-cognitive structures. Students were requested to answer two open ended questions. Answers by each student were gathered and evaluated by flow map method. “Bonding and hybridization” topics were taught to control group with traditional teaching method and to experimental group besides traditional method internet-assisted applications were conducted. The same open-ended questions were given to both groups and their cognitive structures were examined once more. The differences between control and experimental groups’ cognitive structures were examined. A significant difference was identified in favour of experimental group (p<0, 05. The mean score of the Experimental group was X=19.94, and the mean score of the Control group was X=13.88. In addition, subsequent to internet assisted chemistry applications differences in terms of concepts and descriptions in prospective chemistry teachers’ in experimental and control group cognitive structure have been determined. When post flow maps of prospective chemistry teachers in experimental group, on whom internet assisted chemistry applications were made, are formed, it has been determined that there are more statements about hybridization, hybridization types, molecule geometry and bond angles compared to control grou

  18. Molecular dynamics simulation of the formation of sp3 hybridized bonds in hydrogenated diamondlike carbon deposition processes.

    Science.gov (United States)

    Murakami, Yasuo; Horiguchi, Seishi; Hamaguchi, Satoshi

    2010-04-01

    The formation process of sp3 hybridized carbon networks (i.e., diamondlike structures) in hydrogenated diamondlike carbon (DLC) films has been studied with the use of molecular-dynamics simulations. The processes simulated in this study are injections of hydrocarbon (CH3 and CH) beams into amorphous carbon (a-C) substrates. It has been shown that diamondlike sp3 structures are formed predominantly at a subsurface level when the beam energy is relatively high, as in the "subplantation" process for hydrogen-free DLC deposition. However, for hydrogenated DLC deposition, the presence of abundant hydrogen at subsurface levels, together with thermal spikes caused by energetic ion injections, substantially enhances the formation of carbon-to-carbon sp3 bonds. Therefore, the sp3 bond formation process for hydrogenated DLC films essentially differs from that for hydrogen-free DLC films.

  19. Shear-bond-strength of orthodontic brackets to aged nano-hybrid composite-resin surfaces using different surface preparation.

    Science.gov (United States)

    Demirtas, Hatice Kubra; Akin, Mehmet; Ileri, Zehra; Basciftci, Faruk Ayhan

    2015-01-01

    The aim of this study was to evaluate the effects of different surface preparation methods on the shear bond strength (SBS) of orthodontic metal brackets to aged nano-hybrid resin composite surfaces in vitro. A total of 100 restorative composite resin discs, 6 mm in diameter and 3 mm thick, were obtained and treated with an ageing procedure. After ageing, the samples were randomly divided as follows according to surface preparation methods: (1)Control, (2)37% phosphoric acid gel, (3)Sandblasting, (4)Diamond bur, (5)Air-flow and 20 central incisor teeth were used for the control etched group. SBS test were applied on bonded metal brackets to all samples. SBS values and residual adhesives were evaluated. Analysis of variance showed a significant difference (phybrid composite resin surfaces.

  20. Chemical bonding and humidity sensing properties of amorphous carbon nitride (a-CNx) by acetylene gas

    Science.gov (United States)

    Aziz, Siti Aisyah Abd; Purhanudin, Noorain; Awang, Rozidawati

    2017-05-01

    Amorphous carbon nitride (a-CNx) thin films were deposited by radio frequency plasma enhance chemical vapor deposition (RF-PECVD) using a fixed mixture of acetylene (C2H2) at 20 sccm and nitrogen (N2) gases at 50 sccm. The films were deposited at different RF power of 60, 70, 80, 90 and 100 W. The deposition pressure, deposition time and substrate temperature were kept constant at 0.8 mbar, 30 minutes and 100°C, respectively. The chemical bonding of the a-CNx thin films was characterized using Fourier transform infrared spectroscopy (FTIR) and its sensing properties was determined using a home built humidity sensor system. The increase of RF powers leads to an increment of formation of double (C=N) and triple (C≡N) bonds as compared to a-CNx deposited using methane (CH4) or ethane (C2H6) gas. This is due to a higher ratio of C to H atoms in C2H2. The humidity sensing performance show the sensitivity of the films is the highest at low deposition power in changes of relative humidity (%RH). The a-CNx thin film show good repeatability and high sensitivity as a humidity sensing materials which prepared at low RF power.

  1. Experimental evidence of chemical components in the bonding of helium and neon with neutral molecules.

    Science.gov (United States)

    Cappelletti, David; Bartocci, Alessio; Grandinetti, Felice; Falcinelli, Stefano; Belpassi, Leonardo; Tarantelli, Francesco; Pirani, Fernando

    2015-04-13

    The complexes of helium and neon with gaseous neutral molecules are generally perceived to be van der Waals adducts held together by physical (non-covalent) forces, owing to the combination of size (exchange) repulsion with dispersion/induction attraction. Molecular beam experiments confirm that this is the case for He-CF4 , Ne-CF4 adducts, but revealed that the interaction of He and Ne with CCl4 features an appreciable contribution of chemical components that arise from the anisotropy of the electron density of CCl4 that enhances a charge transfer from Ng (Ng=He, Ne). These findings furnish a novel assay of the bonding capabilities of helium and neon, and invite to revisit the neutral complexes of these elements as systems of chemical relevance. The CCl4 -Ng are also peculiar examples of halogen bonds, a group of interactions of major current concern. Finally, this investigation is a prelude to the development of semi-empirical models for force fields aimed to the unified description of static and dynamical properties of systems of comparable or higher complexity.

  2. Effects of Bonding Types and Functional Groups on CO 2 Capture using Novel Multiphase Systems of Liquid-like Nanoparticle Organic Hybrid Materials

    KAUST Repository

    Lin, Kun-Yi Andrew

    2011-08-01

    Novel liquid-like nanoparticle organic hybrid materials (NOHMs) which possess unique features including negligible vapor pressure and a high degree of tunability were synthesized and their physical and chemical properties as well as CO 2 capture capacities were investigated. NOHMs can be classified based on the synthesis methods involving different bonding types, the existence of linkers, and the addition of task-specific functional groups including amines for CO 2 capture. As a canopy of polymeric chains was grafted onto the nanoparticle cores, the thermal stability of the resulting NOHMs was improved. In order to isolate the entropy effect during CO 2 capture, NOHMs were first prepared using polymers that do not contain functional groups with strong chemical affinity toward CO 2. However, it was found that even ether groups on the polymeric canopy contributed to CO 2 capture in NOHMs via Lewis acid-base interactions, although this effect was insignificant compared to the effect of task-specific functional groups such as amine. In all cases, a higher partial pressure of CO 2 was more favorable for CO 2 capture, while a higher temperature caused an adverse effect. Multicyclic CO 2 capture tests confirmed superior recyclability of NOHMs and NOHMs also showed a higher selectivity toward CO 2 over N 2O, O 2 and N 2. © 2011 American Chemical Society.

  3. Load and Time Dependence of Interfacial Chemical Bond-Induced Friction at the Nanoscale

    Science.gov (United States)

    Tian, Kaiwen; Gosvami, Nitya N.; Goldsby, David L.; Liu, Yun; Szlufarska, Izabela; Carpick, Robert W.

    2017-02-01

    Rate and state friction (RSF) laws are widely used empirical relationships that describe the macroscale frictional behavior of a broad range of materials, including rocks found in the seismogenic zone of Earth's crust. A fundamental aspect of the RSF laws is frictional "aging," where friction increases with the time of stationary contact due to asperity creep and/or interfacial strengthening. Recent atomic force microscope (AFM) experiments and simulations found that nanoscale silica contacts exhibit aging due to the progressive formation of interfacial chemical bonds. The role of normal load (and, thus, normal stress) on this interfacial chemical bond-induced (ICBI) friction is predicted to be significant but has not been examined experimentally. Here, we show using AFM that, for nanoscale ICBI friction of silica-silica interfaces, aging (the difference between the maximum static friction and the kinetic friction) increases approximately linearly with the product of the normal load and the log of the hold time. This behavior is attributed to the approximately linear dependence of the contact area on the load in the positive load regime before significant wear occurs, as inferred from sliding friction measurements. This implies that the average pressure, and thus the average bond formation rate, is load independent within the accessible load range. We also consider a more accurate nonlinear model for the contact area, from which we extract the activation volume and the average stress-free energy barrier to the aging process. Our work provides an approach for studying the load and time dependence of contact aging at the nanoscale and further establishes RSF laws for nanoscale asperity contacts.

  4. Total synthesis of feglymycin based on a linear/convergent hybrid approach using micro-flow amide bond formation

    Science.gov (United States)

    Fuse, Shinichiro; Mifune, Yuto; Nakamura, Hiroyuki; Tanaka, Hiroshi

    2016-11-01

    Feglymycin is a naturally occurring, anti-HIV and antimicrobial 13-mer peptide that includes highly racemizable 3,5-dihydroxyphenylglycines (Dpgs). Here we describe the total synthesis of feglymycin based on a linear/convergent hybrid approach. Our originally developed micro-flow amide bond formation enabled highly racemizable peptide chain elongation based on a linear approach that was previously considered impossible. Our developed approach will enable the practical preparation of biologically active oligopeptides that contain highly racemizable amino acids, which are attractive drug candidates.

  5. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials

    Science.gov (United States)

    Güngör, Merve Bankoğlu; Bal, Bilge Turhan; Ünver, Senem; Doğan, Aylin

    2016-01-01

    PURPOSE The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS 120 specimens (10×10×2 mm) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with 125 µm grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin. PMID:27555894

  6. Application of chemical structure and bonding of actinide oxide materials for forensic science

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, Marianne Perry [Los Alamos National Laboratory

    2010-01-01

    We are interested in applying our understanding of actinide chemical structure and bonding to broaden the suite of analytical tools available for nuclear forensic analyses. Uranium- and plutonium-oxide systems form under a variety of conditions, and these chemical species exhibit some of the most complex behavior of metal oxide systems known. No less intriguing is the ability of AnO{sub 2} (An: U, Pu) to form non-stoichiometric species described as AnO{sub 2+x}. Environmental studies have shown the value of utilizing the chemical signatures of these actinide oxide materials to understand transport following release into the environment. Chemical speciation of actinide-oxide samples may also provide clues as to the age, source, or process history of the material. The scientific challenge is to identify, measure and understand those aspects of speciation of actinide analytes that carry information about material origin and history most relevant to forensics. Here, we will describe our efforts in material synthesis and analytical methods development that we will use to provide the fundamental science to characterize actinide oxide molecular structures for forensic science. Structural properties and initial results to measure structural variability of uranium oxide samples using synchrotron-based X-ray Absorption Fine Structure will be discussed.

  7. Hybrid framework with cobalt-chromium alloy and gold cylinder for implant superstructure: Bond strength and corrosion resistance.

    Science.gov (United States)

    Yoshinari, Masao; Uzawa, Shinobu; Komiyama, Yataro

    2016-10-01

    The aim of this in vitro study was to evaluate tensile bond strengths and corrosion resistance of CoCr alloys joined with gold cylinder by a soldering system in comparison with the conventional cast-joining system. CoCr alloys joined with gold cylinder by a soldering system using a high-fusing gold solder (CoCr/Solder/Gold cylinder), gold alloy joined with gold cylinder by a cast joining system (Gold alloy/Gold cylinder) and CoCr castings were fabricated. The tensile bond strength and corrosion resistance in 0.9% NaCl solution (pH 7.4 and pH 2.3) were evaluated. Scanning electron microscopy (SEM) of the fractured surface and electron probe microanalysis (EPMA) of the joined interfaces were also performed. The tensile bond strengths of the CoCr/Solder/Gold cylinder specimens showed similar values as the Gold alloy/Gold cylinder specimens. SEM observation and EPMA analyses suggested firm bonding between the CoCr alloy and gold cylinder. The released elements from the CoCr/Solder/Gold cylinder specimens were similar to ones from CoCr castings. Results showed that superstructures made of CoCr alloys joined with the gold cylinder using a high-fusing gold solder had sufficient bond strength and high corrosion resistance. These hybrid frameworks with cobalt-chromium alloy and gold cylinder are promising prosthesis for implant superstructures with the low cost and favorable mechanical properties instead of conventional high-gold alloys. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  8. C-H bond activation of methane in aqueous solution: a hybrid quantum mechanical/effective fragment potential study.

    Science.gov (United States)

    Da Silva, Júlio C S; Rocha, Willian R

    2011-12-01

    In this study, we investigated the C-H bond activation of methane catalyzed by the complex [PtCl(4)](2-), using the hybrid quantum mechanical/effective fragment potential (EFP) approach. We analyzed the structures, energetic properties, and reaction mechanism involved in the elementary steps that compose the catalytic cycle of the Shilov reaction. Our B3LYP/SBKJC/cc-pVDZ/EFP results show that the methane activation may proceed through two pathways: (i) electrophilic addition or (ii) direct oxidative addition of the C-H bond of the alkane. The electrophilic addition pathway proceeds in two steps with formation of a σ-methane complex, with a Gibbs free energy barrier of 24.6 kcal mol(-1), followed by the cleavage of the C-H bond, with an energy barrier of 4.3 kcal mol(-1) . The activation Gibbs free energy, calculated for the methane uptake step was 24.6 kcal mol(-1), which is in good agreement with experimental value of 23.1 kcal mol(-1) obtained for a related system. The results shows that the activation of the C-H bond promoted by the [PtCl(4)](2-) catalyst in aqueous solution occurs through a direct oxidative addition of the C-H bond, in a single step, with an activation free energy of 25.2 kcal mol(-1), as the electrophilic addition pathway leads to the formation of a σ-methane intermediate that rapidly undergoes decomposition. The inclusion of long-range solvent effects with polarizable continuum model does not change the activation energies computed at the B3LYP/SBKJC/cc-pVDZ/EFP level of theory significantly, indicating that the large EFP water cluster used, obtained from Monte Carlo simulations and analysis of the center-of-mass radial pair distribution function, captures the most important solvent effects.

  9. First principles study of the alloying effect on chemical bonding characteristics of helium in La-Ni-M tritides

    Energy Technology Data Exchange (ETDEWEB)

    Hu, C.H. [Institute of Metal Research, Chinese Academy of Science, 72 Wenhua Road, Shenyang 110016 (China); Zhang, R.J. [Institute of Metal Research, Chinese Academy of Science, 72 Wenhua Road, Shenyang 110016 (China); Shi, L.Q. [Applied Ion Bean Physics Laboratory, Fudan University, Shanghai 200433 (China); Chen, D.M. [Institute of Metal Research, Chinese Academy of Science, 72 Wenhua Road, Shenyang 110016 (China); Wang, Y.M. [Institute of Metal Research, Chinese Academy of Science, 72 Wenhua Road, Shenyang 110016 (China)]. E-mail: ymwang@imr.ac.cn; Yang, K. [Institute of Metal Research, Chinese Academy of Science, 72 Wenhua Road, Shenyang 110016 (China)

    2005-11-15

    The alloying effect on the electronic structure of La-Ni-M tritides is investigated using the first principles discrete variational X{alpha}(DV-X{alpha}) method. The calculated results show that the covalent interaction between atoms will play a much more important role in studying the alloying effect on chemical bonding characteristics in La-Ni-M tritides than ionic interaction. It is also found that in La-Ni-M tritides helium forms stronger covalent bonds with the weaker hydride forming elements than La. By analyzing the relation between the binding energy difference and bond order, our study indicates that after some alloying elements substituting for Ni locating in 3g site in tritides, the helium retention capability becomes stronger, changes as the following sequence: Al > Cr > Mn > Fe > Co > Ni, and is also very distinct for Cu although the chemical bonding between Cu atom and Ni atom is degraded drastically.

  10. Influence of chemical bonding of chlorides with aluminates in cement hidratation process on corrosion steel bars in concrete

    OpenAIRE

    2010-01-01

    The presence of chlorides in concrete is a permanent subject of research because they cause corrosion of steel bars. Chlorides added to the concrete during preparation, as accelerators of the bonding of cement minerals process, enter into reaction with aluminates, creating a phase known as chloroaluminate hydrates. In everyday conditions the product of chemical bonding between chlorides and aluminates is usually monochloridealuminate C3A·CaCl2·Hx, better known as Friedel's salt. In this paper...

  11. Theoretical prediction of hydrogen-bond basicity pKBHX using quantum chemical topology descriptors.

    Science.gov (United States)

    Green, Anthony J; Popelier, Paul L A

    2014-02-24

    Hydrogen bonding plays an important role in the interaction of biological molecules and their local environment. Hydrogen-bond strengths have been described in terms of basicities by several different scales. The pKBHX scale has been developed with the interests of medicinal chemists in mind. The scale uses equilibrium constants of acid···base complexes to describe basicity and is therefore linked to Gibbs free energy. Site specific data for polyfunctional bases are also available. The pKBHX scale applies to all hydrogen-bond donors (HBDs) where the HBD functional group is either OH, NH, or NH+. It has been found that pKBHX can be described in terms of a descriptor defined by quantum chemical topology, ΔE(H), which is the change in atomic energy of the hydrogen atom upon complexation. Essentially the computed energy of the HBD hydrogen atom correlates with a set of 41 HBAs for five common HBDs, water (r2=0.96), methanol (r2=0.95), 4-fluorophenol (r2=0.91), serine (r2=0.93), and methylamine (r2=0.97). The connection between experiment and computation was strengthened with the finding that there is no relationship between ΔE(H) and pKBHX when hydrogen fluoride was used as the HBD. Using the methanol model, pKBHX predictions were made for an external set of bases yielding r2=0.90. Furthermore, the basicities of polyfunctional bases correlate with ΔE(H), giving r2=0.93. This model is promising for the future of computation in fragment-based drug design. Not only has a model been established that links computation to experiment, but the model may also be extrapolated to predict external experimental pKBHX values.

  12. On the Role of D Orbital Hybridization in the Chemistry Curriculum

    Science.gov (United States)

    Galbraith, John Morrison

    2007-01-01

    The role of d-orbital hybridization in the chemistry curriculum and a qualitative description of bonding in SF[subscript 6] are described. The sp[cubed]d[squared] hybridization model found to be helpful in understanding the chemical phenomenon of chemical bonding in SF[subscript 6] and are not applicable to all situations.

  13. Chemical bonding in aqueous hexacyano cobaltate from photon- and electron-detection perspectives

    Science.gov (United States)

    Lalithambika, Sreeju Sreekantan Nair; Atak, Kaan; Seidel, Robert; Neubauer, Antje; Brandenburg, Tim; Xiao, Jie; Winter, Bernd; Aziz, Emad F.

    2017-01-01

    The electronic structure of the [Co(CN)6]3- complex dissolved in water is studied using X-ray spectroscopy techniques. By combining electron and photon detection methods from the solutions ionized or excited by soft X-rays we experimentally identify chemical bonding between the metal center and the CN ligand. Non-resonant photoelectron spectroscopy provides solute electron binding energies, and nitrogen 1 s and cobalt 2p resonant core-level photoelectron spectroscopy identifies overlap between metal and ligand orbitals. By probing resonances we are able to qualitatively determine the ligand versus metal character of the respective occupied and non-occupied orbitals, purely by experiment. For the same excitations we also detect the emitted X-rays, yielding the complementary resonant inelastic X-ray scattering spectra. For a quantitative interpretation of the spectra, we perform theoretical electronic-structure calculations. The latter provide both orbital energies and orbital character which are found to be in good agreement with experimental energies and with experimentally inferred orbital mixing. We also report calculated X-ray absorption spectra, which in conjunction with our orbital-structure analysis, enables us to quantify various bonding interactions with a particular focus on the water-solvent - ligand interaction and the strength of π-backbonding between metal and ligand.

  14. Chemical bonding and electronic-structure in MAX phases as viewed by X-ray spectroscopy and density functional theory

    Science.gov (United States)

    Magnuson, Martin; Mattesini, Maurizio

    2017-01-01

    This is a critical review of MAX-phase carbides and nitrides from an electronic-structure and chemical bonding perspective. This large group of nanolaminated materials is of great scientific and technological interest and exhibit a combination of metallic and ceramic features. These properties are related to the special crystal structure and bonding characteristics with alternating strong M-C bonds in high-density MC slabs, and relatively weak M-A bonds between the slabs. Here, we review the trend and relationship between the chemical bonding, conductivity, elastic and magnetic properties of the MAX phases in comparison to the parent binary MX compounds with the underlying electronic structure probed by polarized X-ray spectroscopy. Spectroscopic studies constitute important tests of the results of state-of-the-art electronic structure density functional theory that is extensively discussed and are generally consistent. By replacing the elements on the M, A, or X-sites in the crystal structure, the corresponding changes in the conductivity, elasticity, magnetism and other materials properties makes it possible to tailor the characteristics of this class of materials by controlling the strengths of their chemical bonds.

  15. Fabrication of a molecular-level multilayer film on organic polymer surfaces via chemical bonding assembly.

    Science.gov (United States)

    Zhao, Hongchi; Yang, Peng; Deng, Jianping; Liu, Lianying; Zhu, Jianwu; Sui, Yuan; Lu, Jiaoming; Yang, Wantai

    2007-02-13

    A fresh multilayer film was fabricated on a molecular level and successfully tethered to the surface of a hydroxylated organic substrate via chemical bonding assembly (CBA). Sulfate anion groups (SO4-) were preintroduced onto the surface of biaxially oriented polypropylene (BOPP) films via a reference method. Upon hydrolysis of the SO4- groups, hydroxyl groups (--OH) were formed that subsequently acted as initial reagents for a series of alternate reactions with terephthalyl chloride (TPC) and bisphenol A (BPA). A stable and well-defined multilayer film was thus fabricated via the CBA method. As a result of the nanoscale multilayer fresh film being abundant with reactive groups, it is believed that the film and its fabrication method should provide a fundamental platform for further surface functionalization and direct the design of advanced materials with desired properties.

  16. Wollastonite based-Chemically Bonded Phosphate Ceramics with lead oxide contents under gamma irradiation

    Science.gov (United States)

    Colorado, H. A.; Pleitt, J.; Hiel, C.; Yang, J. M.; Hahn, H. T.; Castano, C. H.

    2012-06-01

    The shielding properties to gamma rays as well as the effect of lead concentration incorporated into Chemically Bonded Phosphate Ceramics (CBPCs) composites are presented. The Wollastonite-based CBPC was fabricated by mixing a patented aqueous phosphoric acid formulation with Wollastonite powder. CBPC has been proved to be good structural material, with excellent thermal resistant properties, and research already showed their potential for radiation shielding applications. Wollastonite-based CBPC is a composite material itself with several crystalline and amorphous phases. Irradiation experiments were conducted on different Wollastonite-based CBPCs with lead oxide. Radiation shielding potential, attenuation coefficients in a broad range of energies pertinent to engineering applications and density experiments showing the effect of the PbO additions (to improve gamma shielding capabilities) are also presented. Microstructure was identified by using scanning electron microscopy and X-ray diffraction.

  17. Method for Producing Chemically Bonded Phosphate Ceramics and for Stabilizing Contaminants Encapsulated therein Utilizing Reducing Agents

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Dileep; Wagh, Arun S.; Jeong, Seung-Young

    1999-05-05

    Known phosphate ceramic formulations are improved and the ability to produce iron-based phosphate ceramic systems is enabled by the addition of an oxidizing or reducing step during the acid-base reactions that form the phosphate ceramic products. The additives allow control of the rate of the acid-base reactions and concomitant heat generation. In an alternate embodiment, waste containing metal anions is stabilized in phosphate ceramic products by the addition of a reducing agent to the phosphate ceramic mixture. The reduced metal ions are more stable and/or reactive with the phosphate ions, resulting in the formation of insoluble metal species within the phosphate ceramic matrix, such that the resulting chemically bonded phosphate ceramic product has greater leach resistance.

  18. Chemical Bonding in Aqueous Ferrocyanide: Experimental and Theoretical X-ray Spectroscopic Study

    CERN Document Server

    Engel, Nicholas; Suljoti, Edlira; Garcia-Diez, Raul; Lange, Kathrin M; Atak, Kaan; Golnak, Ronny; Kothe, Alexander; Dantz, Marcus; Kühn, Oliver; Aziz, Emad F

    2013-01-01

    Resonant inelastic X-ray scattering (RIXS) and X-ray absorption (XA) experiments at the iron L- and nitrogen K-edge are combined with high-level first principles restricted active space self-consistent field (RASSCF) calculations for a systematic investigation of the nature of the chemical bond in potassium ferrocyanide in aqueous solution. The atom- and site-specific RIXS excitations allow for direct observation of ligand-to-metal (Fe L-edge) and metal-to-ligand (N K-edge) charge transfer bands and thereby evidence for strong {\\sigma}-donation and {\\pi}-back-donation. The effects are identified by comparing experimental and simulated spectra related to both the unoccupied and occupied molecular orbitals in solution.

  19. Micro-chemical analysis of diffusion bonded W-SiC joint

    Energy Technology Data Exchange (ETDEWEB)

    Matsuo, Genichiro [Graduate Student, Graduate School of Engineering, Hokkaido University, Sapporo Hokkaido 060-8628 (Japan); Shibayama, Tamaki, E-mail: shiba@ufml.caret.hokudai.ac.jp [Center for Advanced Research of Energy Conversion Materials, Hokkaido University, Sapporo Hokkaido 060-8628 (Japan); Kishimoto, Hirotatsu [Department of Materials Science and Engineering, Muroran Institute of Technology, Muroran Hokkaido 050-8585 (Japan); Hamada, Kouichi; Watanabe, Seiichi [Center for Advanced Research of Energy Conversion Materials, Hokkaido University, Sapporo Hokkaido 060-8628 (Japan)

    2011-10-01

    W and SiC joining has an attractive feature for high-temperature energy conversion systems. However, it is unclear and that is necessary to study the microstructure of the reaction phase between W and SiC by using the thermal diffusion bonding method. This work demonstrates the strengthening mechanism of W and SiC joining through a microstructure analysis of the reaction phase by FE-TEM/EDS and the observation of the interface in W and SiC after the crack propagation in HVEM. The reaction phase was amorphous, with a gap from 500 to 600 nm between W and SiC. Fine precipitates with a diameter of several tens nanometer were formed in the reaction phase. The reaction phase and precipitates did not match the chemical composition of the equilibrium compound. It is conceivable that the reaction phase and precipitates exist as a non-equilibrium condition before they reach equilibrium condition.

  20. Intramolecular hydrogen bonding in myricetin and myricitrin. Quantum chemical calculations and vibrational spectroscopy

    Science.gov (United States)

    Vojta, Danijela; Dominković, Katarina; Miljanić, Snežana; Spanget-Larsen, Jens

    2017-03-01

    The molecular structures of myricetin (3,3‧,4‧,5,5‧,7-hexahydroxyflavone; MCE) and myricitrin (myricetin 3-O-rhamnoside; MCI) are investigated by quantum chemical calculations (B3LYP/6-311G**). Two preferred molecular rotamers of MCI are predicted, corresponding to different conformations of the O-rhamnoside subunit. The rotamers are characterized by different hydrogen bonded cross-links between the hydroxy groups of the rhamnoside substituent and the parent MCE moiety. The predicted OH stretching frequencies are compared with vibrational spectra of MCE and MCI recorded for the sake of this investigation (IR and Raman). In addition, a reassignment of the Cdbnd O stretching bands is suggested.

  1. Novel Chemically-Bonded Phosphate Ceramic Borehole Sealants (Ceramicretes) for Arctic Environments

    Energy Technology Data Exchange (ETDEWEB)

    Shirish Patil; Godwin A. Chukwu; Gang Chen; Santanu Khataniar

    2008-12-31

    Novel chemically bonded phosphate ceramic borehole sealant, i.e. Ceramicrete, has many advantages over conventionally used permafrost cement at Alaska North Slope (ANS). However, in normal field practices when Ceramicrete is mixed with water in blenders, it has a chance of being contaminated with leftover Portland cement. In order to identify the effect of Portland cement contamination, recent tests have been conducted at BJ services in Tomball, TX as well as at the University of Alaska Fairbanks with Ceramicrete formulations proposed by the Argonne National Laboratory. The tests conducted at BJ Services with proposed Ceramicrete formulations and Portland cement contamination have shown significant drawbacks which has caused these formulations to be rejected. However, the newly developed Ceramicrete formulation at the University of Alaska Fairbanks has shown positive results with Portland cement contamination as well as without Portland cement contamination for its effective use in oil well cementing operations at ANS.

  2. Effect of cross-linking with riboflavin and ultraviolet A on the chemical bonds and ultrastructure of human sclera

    Science.gov (United States)

    Jung, Gyeong-Bok; Lee, Hui-Jae; Kim, Ji-Hye; Lim, Jin Ik; Choi, Samjin; Jin, Kyung-Hyun; Park, Hun-Kuk

    2011-12-01

    This study examined the effect of the cross-linking with riboflavin-ultraviolet A (UVA) irradiation on the chemical bonds and ultrastructural changes of human sclera tissues using Raman spectroscopy and atomic force microscopy (AFM). Raman spectroscopy of the normal and cross-linked human sclera tissue revealed different types of the riboflavin-UVA and collagen interactions, which could be identified from their unique peaks, intensity, and shape. Raman spectroscopy can prove to be a powerful tool for examining the chemical bond of collagenous tissues at the molecular level. After riboflavin-UVA treatment, unlike a regular parallel arrangement of normal collagen fibrils, the AFM image revealed interlocking arrangements of collagen fibrils. The observed changes in the surface topography of the collagen fibrils, as well as in their chemical bonds in the sclera tissue, support the formation of interfibrilar cross-links in sclera tissues.

  3. Mechanical properties of chemically bonded sand core materials dipped in sol-gel coating impregnated with filter

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat

    2012-01-01

    -displacement curve from which the mechanical properties of the materials are deduced. The fracture surfaces were examined using a stereomicroscope and a scanning electron microscope. From the results, the strengths of the core materials were slightly reduced by the coating in tensile and flexural modes, while...... the strengths were increased under compression. The mode of fracture of the chemically bonded sand core materials was observed to be intergranular through the binder. The stiffness of the chemically bonded sand core materials was determined. For better understanding of the mechanical properties......A novel sol-gel coating impregnated with filter dust was applied on chemically bonded sand core materials by dipping. After curing, the strengths of the core materials were measured under uniaxial loading using a new strength testing machine (STM). The STM presents the loading history as a force...

  4. A New Optimum Frequency Controller of Hybrid Pumping System: Bond Graph Modeling-Simulation and Practice with ARDUINO Board

    Directory of Open Access Journals (Sweden)

    MEZGHANI Dhafer

    2017-01-01

    Full Text Available The strategy of rural development in Tunisia needs to include as one of its priorities: the control of water. In seeking solutions for the energy control dedicated to pumping, it seems interesting to know the benefits of a new technique based on the complementarities of two renewable energy sources such as solar and wind power. The climate’s dependence requires a complex modelling and more optimization methods for controlling of hybrid system. Moreover, in recent years, technological progression at hardware and software enables researchers to process these optimization problems using embedded platforms. For this paper, we apply the approach bond graph to model a complex system. Our hybrid pumping installation contains a photovoltaic generator, a wind source, converters and an induction motor-pump group. The numerical closed-loop simulation of the complete model in an appropriate environment allows us to generate an optimisation control whose the appropriate frequency depends on meteorological conditions (wind speed, insulation and temperature. The implementation of this control and the experimental measurements validate the optimum efficiency and verify operation reliability of our hybrid structure.

  5. Layer-by-layer fabrication of chemical-bonded graphene coating for solid-phase microextraction.

    Science.gov (United States)

    Zhang, Suling; Du, Zhuo; Li, Gongke

    2011-10-01

    A new fabrication strategy of the graphene-coated solid-phase microextraction (SPME) fiber is developed. Graphite oxide was first used as starting coating material that covalently bonded to the fused-silica substrate using 3-aminopropyltriethoxysilane (APTES) as cross-linking agent and subsequently deoxidized by hydrazine to give the graphene coating in situ. The chemical bonding between graphene and the silica fiber improve its chemical stability, and the obtained fiber was stable enough for more than 150 replicate extraction cycles. The graphene coating was wrinkled and folded, like the morphology of the rough tree bark. Its performance is tested by headspace (HS) SPME of polycyclic aromatic hydrocarbons (PAHs) followed by GC/MS analysis. The results showed that the graphene-coated fiber exhibited higher enrichment factors (EFs) from 2-fold for naphthalene to 17-fold for B(b)FL as compared to the commercial polydimethylsioxane (PDMS) fiber, and the EFs increased with the number of condensed rings of PAHs. The strong adsorption affinity was believed to be mostly due to the dominant role of π-π stacking interaction and hydrophobic effect, according to the results of selectivity study for a variety of organic compounds including PAHs, the aromatic compounds with different substituent groups, and some aliphatic hydrocarbons. For PAHs analysis, the graphene-coated fiber showed good precision (<11%), low detection limits (1.52-2.72 ng/L), and wide linearity (5-500 ng/L) under the optimized conditions. The repeatability of fiber-to-fiber was 4.0-10.8%. The method was applied to simultaneous analysis of eight PAHs with satisfactory recoveries, which were 84-102% for water samples and 72-95% for soil samples, respectively.

  6. X-ray photoelectron spectra structure and chemical bonding in AmO2

    Directory of Open Access Journals (Sweden)

    Teterin Yury A.

    2015-01-01

    Full Text Available Quantitative analysis was done of the X-ray photoelectron spectra structure in the binding energy range of 0 eV to ~35 eV for americium dioxide (AmO2 valence electrons. The binding energies and structure of the core electronic shells (~35 eV-1250 eV, as well as the relativistic discrete variation calculation results for the Am63O216 and AmO8 (D4h cluster reflecting Am close environment in AmO2 were taken into account. The experimental data show that the many-body effects and the multiplet splitting contribute to the spectral structure much less than the effects of formation of the outer (0-~15 eV binding energy and the inner (~15 eV-~35 eV binding energy valence molecular orbitals. The filled Am 5f electronic states were shown to form in the AmO2 valence band. The Am 6p electrons participate in formation of both the inner and the outer valence molecular orbitals (bands. The filled Am 6p3/2 and the O 2s electronic shells were found to make the largest contributions to the formation of the inner valence molecular orbitals. Contributions of electrons from different molecular orbitals to the chemical bond in the AmO8 cluster were evaluated. Composition and sequence order of molecular orbitals in the binding energy range 0-~35 eV in AmO2 were established. The experimental and theoretical data allowed a quantitative scheme of molecular orbitals for AmO2, which is fundamental for both understanding the chemical bond nature in americium dioxide and the interpretation of other X-ray spectra of AmO2.

  7. Effect of probiotic preparation for chemical composition of meat cocks different combinations of hybrid chicks

    Directory of Open Access Journals (Sweden)

    Peter Haščík

    2011-01-01

    Full Text Available In the experiment were verified the application of probiotic preparation through a water supply for feeding of cock’s hybrids Ross 308, Hubbard JV and Cobb 500 in the chemical composition of the most valuable parts of the carcass. Probiotic was based on the strain Lactobacillus fermentum with containing of 1.109 cfu.g−1 and potentially components of maltodextrin and oligofructose in 1% concentration. Length of feeding period was 42 days. Cocks were fed an ad libitum with the same starter mixture HYD-01 to 21th day and from 22nd to 42nd day of feeding with mixture HYD-02 in powdery form. The average of protein content of breast muscle was highest in Hubbard JV hybrid (23.93 g.100 g−1, lower in Cobb 500 hybrid (23.90 g.100 g−1 and lowest in Ross 308 hybrid (23.73 g.100 g−1, without significant differences (P ≥ 0.05 between hybrids and hybrids groups. Effect of probiotics had increased the protein content (P ≥ 0.05 in breast muscle of Ross 308 and Cobb 500 cocks and at the Hubbard JV only lower doses application during the feeding. The average of fat content in 100 g of breast muscle was lowest in Cobb 500 hybrid (1.09 g, higher in Hubbard JV hybrid (1.28 g and highest in Ross 308 hybrid (1.35 g. Effect of probiotic to reduce fat content in breast muscle of cocks was at Ross 308 hybrid (1.33 and 1.23 g.100 g−1, Cobb 500 hybrid (0.98 and 1.02 g.100 g−1 and in second experimental group at Hubbard JV hybrid (1.03 g.100 g−1 statistically significant (P ≥ 0.05 in compared with control group, but significantly (P ≤ 0.05 between hybrids Cobb 500 and Hubbard JV in the first test groups. The average of energy value in 100 g of breast muscle was highest in Hubbard JV hybrid (449.24 kJ, lower in Ross 308 hybrid (448.40 kJ and lowest in Cobb 500 hybrid (441.45 kJ, without significant differences (P ≥ 0.05 between hybrids and hybrids groups. The average of protein content of the femur was highest in Ross 308 hybrid (18.56 g.100

  8. Effects of bonding types and functional groups on CO2 capture using novel multiphase systems of liquid-like nanoparticle organic hybrid materials.

    Science.gov (United States)

    Lin, Kun-Yi Andrew; Park, Ah-Hyung Alissa

    2011-08-01

    Novel liquid-like nanoparticle organic hybrid materials (NOHMs) which possess unique features including negligible vapor pressure and a high degree of tunability were synthesized and their physical and chemical properties as well as CO(2) capture capacities were investigated. NOHMs can be classified based on the synthesis methods involving different bonding types, the existence of linkers, and the addition of task-specific functional groups including amines for CO(2) capture. As a canopy of polymeric chains was grafted onto the nanoparticle cores, the thermal stability of the resulting NOHMs was improved. In order to isolate the entropy effect during CO(2) capture, NOHMs were first prepared using polymers that do not contain functional groups with strong chemical affinity toward CO(2). However, it was found that even ether groups on the polymeric canopy contributed to CO(2) capture in NOHMs via Lewis acid-base interactions, although this effect was insignificant compared to the effect of task-specific functional groups such as amine. In all cases, a higher partial pressure of CO(2) was more favorable for CO(2) capture, while a higher temperature caused an adverse effect. Multicyclic CO(2) capture tests confirmed superior recyclability of NOHMs and NOHMs also showed a higher selectivity toward CO(2) over N(2)O, O(2) and N(2).

  9. Anatomy of bond formation. Bond length dependence of the extent of electron sharing in chemical bonds from the analysis of domain-averaged Fermi holes.

    Science.gov (United States)

    Ponec, Robert; Cooper, David L

    2007-01-01

    We demonstrate that domain-average Fermi hole (DAFH) analysis, which has previously been used at the Hartree-Fock level, remains useful after the proper introduction of electron correlation. We perform a systematic investigation of the variation of the picture of bonding with increasing bond length in simple diatomic molecules such as N2 and LiH. Alongside values of a shared-electron distribution index (SEDI), this analysis provides further insight into the geometry dependence of the extent of electron sharing in polar and non-polar systems. We also use DAFH analysis, with correlated wave functions, to evaluate the (potential) multicentre bonding in the electron-deficient and electron-rich molecules CH2Li2 and CH2N2, respectively.

  10. Influence of the Sr and Mg Alloying Additions on the Bonding Between Matrix and Reinforcing Particles in the AlSi7Mg/SiC-Cg Hybrid Composite

    Directory of Open Access Journals (Sweden)

    Dolata A. J.

    2016-06-01

    Full Text Available The aim of the work was to perform adequate selection of the phase composition of the composite designated for permanent - mould casting air compressor pistons. The hybrid composites based on AlSi7Mg matrix alloy reinforced with mixture of silicon carbide (SiC and glassy carbon (Cg particles were fabricated by the stir casting method. It has been shown that the proper selection of chemical composition of matrix alloy and its modification by used magnesium and strontium additions gives possibility to obtain both the advantageous casting properties of composite suspensions as well as good bonding between particles reinforcements and matrix.

  11. Electronic properties and chemical bonding in quaternary arsenide oxides LaZnAsO and YZnAsO

    Energy Technology Data Exchange (ETDEWEB)

    Bannikov, V.V.; Shein, I.R. [Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, Pervomaiskaya, 91, 620041, Ekaterinburg (Russian Federation); Ivanovskii, A.L., E-mail: ivanovskii@ihim.uran.ru [Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, Pervomaiskaya, 91, 620041, Ekaterinburg (Russian Federation)

    2009-07-15

    First principles FLAPW-GGA band structure calculations are employed to obtain the structural, electronic properties and chemical bonding picture for two related phases, namely, quaternary arsenide oxides LaZnAsO and YZnAsO. These compounds are found to be direct-transition type semiconductors with the GGA gaps of about 0.65-1.30 eV. The peculiarities of chemical bonding in these phases are investigated and discussed in comparison with quaternary arsenide oxide LaFeAsO-a basic phase for the newly discovered 26-55 K superconductors.

  12. Zirconia-based luminescent organic-inorganic hybrid materials with ternary europium (III) complexes bonded

    Science.gov (United States)

    Yang, Jing; Li, Zhiqiang; Xu, Yang; Wang, Yige

    2016-05-01

    In this work, a novel red-emitting organic-inorganic hybrid material with europium (III) lanthanide β-diketonate complexes linked to a zirconia was reported, which was realized by adduct formation with zirconia-tethered terpyridine moieties. Luminescence enhancement of the hybrid material has been observed compared with pure Eu(tta)3·2H2O. Transparent and strongly luminescent thin films based on PMMA were also prepared at room temperature, which are highly luminescent under UV-light irradiation and possess a promising prospect in the area of optics.

  13. Si-gold-glass hybrid wafer bond for 3D-MEMS and wafer level packaging

    Science.gov (United States)

    Reddy, Jayaprakash; Pratap, Rudra

    2017-01-01

    We report a relatively low temperature (MEMS device integration and wafer level packaging. We demonstrate the process by realizing a simple MEMS cantilever beam and a complex MEMS gyroscope structure. These structures are characterized for ohmic contact and electromechanical response to verify the electrical interconnect and the mechanical strength of the structure at the bond interface.

  14. Simple Link Atom Saccharide Hybrid (SLASH) Treatment for Glycosidic Bonds at the QM/MM Boundary.

    Science.gov (United States)

    Crous, Werner; Field, Martin J; Naidoo, Kevin J

    2014-04-08

    We investigated link atom approaches for treating the polar C-O bond with particular reference to the glycosidic bond found in complex carbohydrates. We show that cutting this bond after the oxygen in the QM region and saturating the QM system with a hydrogen link atom leads to greater conformational and configurational accuracy at the boundary compared with cutting the bond before oxygen and saturating the QM system with a halogen link atom to represent the oxygen. Furthermore, we find that balancing the MM atom charges and redistributing the boundary atom charges at the QM/MM boundary minimizes the effect of the link atom, both energetically and structurally. This is illustrated via a series of calculations on a set of carbohydrate and carbohydrate-like model compounds. Finally, we confirm the validity of our model by performing molecular dynamics simulations for a typical disaccharide model compound in water. Our postsimulation conformational and configurational analyses show that the oxygen-to-water hydrogen pair distribution functions and the Φ,Ψ distributions at the glycosidic boundary between the quantum and classical regions compare favorably with results obtained from complete QM and complete MM treatments of the saccharide.

  15. CHEMICAL ACTIVATION OF MOLECULES BY METALS: EXPERIMENTAL STUDIES OF ELECTRON DISTRIBUTIONS AND BONDING

    Energy Technology Data Exchange (ETDEWEB)

    LICHTENBERGER, DENNIS L.

    2002-03-26

    This research program is directed at obtaining detailed experimental information on the electronic interactions between metals and organic molecules. These interactions provide low energy pathways for many important chemical and catalytic processes. A major feature of the program is the continued development and application of our special high-resolution valence photoelectron spectroscopy (UPS), and high-precision X-ray core photoelectron spectroscopy (XPS) instrumentation for study of organometallic molecules in the gas phase. The study involves a systematic approach towards understanding the interactions and activation of bound carbonyls, C-H bonds, methylenes, vinylidenes, acetylides, alkenes, alkynes, carbenes, carbynes, alkylidenes, alkylidynes, and others with various monometal, dimetal, and cluster metal species. Supporting ligands include -aryls, alkoxides, oxides, and phosphines. We are expanding our studies of both early and late transition metal species and electron-rich and electron-poor environments in order to more completely understand the electronic factors that serve to stabilize particular organic fragments and intermediates on metals. Additional new directions for this program are being taken in ultra-high vacuum surface UPS, XPS, scanning tunneling microscopy (STM) and atomic force microscopy (AFM) experiments on both physisorbed and chemisorbed organometallic thin films. The combination of these methods provides additional electronic structure information on surface-molecule and molecule-molecule interactions. A very important general result emerging from this program is the identification of a close relationship between the ionization energies of the species and the thermodynamics of the chemical and catalytic reactions of these systems.

  16. Valence XPS structure and chemical bond in Cs2UO2Cl4

    Directory of Open Access Journals (Sweden)

    Teterin Yury A.

    2016-01-01

    Full Text Available Quantitative analysis was done of the valence electrons X-ray photoelectron spectra structure in the binding energy (BE range of 0 eV to ~35 eV for crystalline dicaesium tetrachloro-dioxouranium (VI (Cs2UO2Cl4. This compound contains the uranyl group UO2. The BE and structure of the core electronic shells (~35 eV-1250 eV, as well as the relativistic discrete variation calculation results for the UO2Cl4(D4h cluster reflecting U close environment in Cs2UO2Cl4 were taken into account. The experimental data show that many-body effects due to the presence of cesium and chlorine contribute to the outer valence (0-~15 eV BE spectral structure much less than to the inner valence (~15 eV-~35 eV BE one. The filled U5f electronic states were theoretically calculated and experimentally confirmed to be present in the valence band of Cs2UO2Cl4. It corroborates the suggestion on the direct participation of the U5f electrons in the chemical bond. Electrons of the U6p atomic orbitals participate in formation of both the inner (IVMO and the outer (OVMO valence molecular orbitals (bands. The filled U6p and the O2s, Cl3s electronic shells were found to make the largest contributions to the IVMO formation. The molecular orbitals composition and the sequence order in the binding energy range 0 eV-~35 eV in the UO2Cl4 cluster were established. The experimental and theoretical data allowed a quantitative molecular orbitals scheme for the UO2Cl4 cluster in the BE range 0-~35 eV, which is fundamental for both understanding the chemical bond nature in Cs2UO2Cl4 and the interpretation of other X-ray spectra of Cs2UO2Cl4. The contributions to the chemical binding for the UO2Cl4 cluster were evaluated to be: the OVMO contribution - 76%, and the IVMO contribution - 24 %.

  17. Electronic structure and chemical bond nature in Cs2PuO2Cl4

    Directory of Open Access Journals (Sweden)

    Teterin Yury A.

    2015-01-01

    Full Text Available X-ray photoelectron spectral analysis of dicaesiumtetrachlorodioxoplutonate (Cs2PuO2Cl4 single crystal was done in the binding energy range 0-~35 eV on the basis of binding energies and structure of the core electronic shells (~35 eV-1250 eV, as well as the relativistic discrete variation calculation results for the PuO2Cl4 (D4h. This cluster reflects Pu close environment in Cs2PuO2Cl4 containing the plutonyl group PuO2. The many-body effects due to the presence of cesium and chlorine were shown to contribute to the outer valence (0-~15 eV binding energy spectral structure much less than to the inner valence (~15 eV- ~35 eV binding energy one. The filled Pu 5f electronic states were theoretically calculated and experimentally con- firmed to present in the valence band of Cs2PuO2Cl4. It corroborates the suggestion on the direct participation of the Pu 5f electrons in the chemical bond. The Pu 6p atomic orbitals were shown to participate in formation of both the inner and the outer valence molecular orbitals (bands, while the filled Pu 6p and O 2s, Cl 3s electronic shells were found to take the largest part in formation of the inner valence molecular orbitals. The composition of molecular orbitals and the sequence order in the binding energy range 0-~35 eV in Cs2PuO2Cl4 were established. The quantitative scheme of molecular orbitals for Cs2PuO2Cl4 in the binding energy range 0-~15 eV was built on the basis of the experimental and theoretical data. It is fundamental for both understanding the chemical bond nature in Cs2PuO2Cl4 and the interpretation of other X-ray spectra of Cs2PuO2Cl4. The contributions to the chemical binding for the PuO2Cl4 cluster were evaluated to be: the contribution of the outer valence molecular orbitals -66 %, the contribution of the inner valence molecular orbitals -34 %.

  18. A Hybrid Mutation Chemical Reaction Optimization Algorithm for Global Numerical Optimization

    Directory of Open Access Journals (Sweden)

    Ransikarn Ngambusabongsopa

    2015-01-01

    Full Text Available This paper proposes a hybrid metaheuristic approach that improves global numerical optimization by increasing optimal quality and accelerating convergence. This algorithm involves a recently developed process for chemical reaction optimization and two adjustment operators (turning and mutation operators. Three types of mutation operators (uniform, nonuniform, and polynomial were combined with chemical reaction optimization and turning operator to find the most appropriate framework. The best solution among these three options was selected to be a hybrid mutation chemical reaction optimization algorithm for global numerical optimization. The optimal quality, convergence speed, and statistical hypothesis testing of our algorithm are superior to those previous high performance algorithms such as RCCRO, HP-CRO2, and OCRO.

  19. The Electrochemical Characteristics of Hybrid Capacitor Prepared by Chemical Activation of NaOH

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jeong Eun; Bae, Ga Yeong; Yang, Jeong Min; Lee, Jong Dae [Chungbuk National Univ., Chungju (Korea, Republic of)

    2013-06-15

    Active carbons with high specific surface area and micro pore structure were prepared from the coconut shell char using the chemical activation method of NaOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to char ratio and the flow rate of gas during carbonization. The active carbons with the surface area (2,481m{sup 2}/g) and mean pore size (2.32 nm) were obtained by chemical activation with NaOH. The electrochemical performances of hybrid capacitor were investigated using LiMn{sub 2}O{sub 4}, LiCoO{sub 2} as the positive electrode and prepared active carbon as the negative electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes (LiPF{sub 6}, TEABF{sub 4}) were characterized by constant current charge/discharge, cyclic voltammetry, cycle and leakage tests. The hybrid capacitor using LiMn{sub 2}O{sub 4}/AC electrodes had better capacitance than other hybrid systems and was able to deliver a specific energy as high as 131 Wh/kg at a specific power of 1,448 W/kg.

  20. Recent advancement of hybrid materials used in chemical enhanced oil recovery (CEOR): A review

    Science.gov (United States)

    Hamza, M. F.; Sinnathambi, C. M.; Merican, Z. M. A.

    2017-06-01

    Depletion of natural oil reserves has forced oil industries to focus on tertiary recovery methods to extract residual oil after exhausting the primary and secondary methods. Among the Enhance Oil Recovery (EOR) technologies, Chemical EOR (CEOR) is gaining popularity. Despite research efforts to increase the recovery using CEOR, increasing complexity in extraction methods are encountered. With changes in reservoir conditions (high temperature, pressure and salinity) and crude oil properties, existing chemicals used in CEOR, such as alkali, polymers and surfactants do not function desirably. These conditions have detrimental effects on the performance of EOR chemicals, like precipitation, degradation, etc. Development and utilization of effective EOR hybrids such as surfactant-polymer, polymer-nanomaterial, surfactant-nanomaterial and polymer-surfactant-nanomaterial had prevailed the effects of harsh reservoir conditions, and their applications in oil fields in recent years have increased the success of EOR. The synergistic effects between the hybrid components play major roles in improving the properties that could withstand the effect of extreme reservoir conditions and changes in crude oil properties. Therefore, this paper is aimed at reviewing recent advances in CEOR hybrid technologies, and discusses the basic concept, applications, advancement and limitations of different hybrid materials used in CEOR processes.

  1. Chemical adhesion rather than mechanical retention enhances resin bond durability of a dental glass-ceramic with leucite crystallites

    Energy Technology Data Exchange (ETDEWEB)

    Meng, X F [Department of Prosthodontics, The Stomatological Hospital Affiliated Medical School, Nanjing University, Nanjing 210008 (China); Yoshida, K [Division of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University, Nagasaki 852-8588 (Japan); Gu, N, E-mail: mengsoar@nju.edu.c [Jiangsu Key Laboratory for Biomaterials and Devices, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096 (China)

    2010-08-01

    This study aims to evaluate the effect of chemical adhesion by a silane coupler and mechanical retention by hydrofluoric acid (HFA) etching on the bond durability of resin to a dental glass ceramic with leucite crystallites. Half of the ceramic plates were etched with 4.8% HFA (HFA group) for 60 s, and the other half were not treated (NoHFA group). The scale of their surface roughness and rough area was measured by a 3D laser scanning microscope. These plates then received one of the following two bond procedures to form four bond test groups: HFA/cement, NoHFA/cement, HFA/silane/cement and NoHFA/silane/cement. The associated micro-shear bond strength and bond failure modes were tested after 0 and 30 000 thermal water bath cycles. Four different silane/cement systems (Monobond S/Variolink II, GC Ceramic Primer/Linkmax HV, Clearfil Ceramic Primer/Clearfil Esthetic Cement and Porcelain Liner M/SuperBond C and B) were used. The data for each silane/cement system were analyzed by three-way ANOVA. HFA treatment significantly increased the surface R{sub a} and R{sub y} values and the rough area of the ceramic plates compared with NoHFA treatment. After 30 000 thermal water bath cycles, the bond strength of all the test groups except the HFA/Linkmax HV group was significantly reduced, while the HFA/Linkmax HV group showed only adhesive interface failure. The other HFA/cement groups and all NoHFA/cement groups lost bond strength completely, and all NoHFA/silane/cement groups with chemical adhesion had significantly higher bond strength and more ceramic cohesive failures than the respective HFA/cement groups with mechanical retention. The result of the HFA/silane/cement groups with both chemical adhesion and mechanical retention revealed that HFA treatment could enhance the bond durability of resin/silanized glass ceramics, which might result from the increase of the chemical adhesion area on the ceramic rough surface and subsequently reduced degradation speed of the silane

  2. Understanding boron through size-selected clusters: structure, chemical bonding, and fluxionality.

    Science.gov (United States)

    Sergeeva, Alina P; Popov, Ivan A; Piazza, Zachary A; Li, Wei-Li; Romanescu, Constantin; Wang, Lai-Sheng; Boldyrev, Alexander I

    2014-04-15

    Boron is an interesting element with unusual polymorphism. While three-dimensional (3D) structural motifs are prevalent in bulk boron, atomic boron clusters are found to have planar or quasi-planar structures, stabilized by localized two-center-two-electron (2c-2e) σ bonds on the periphery and delocalized multicenter-two-electron (nc-2e) bonds in both σ and π frameworks. Electron delocalization is a result of boron's electron deficiency and leads to fluxional behavior, which has been observed in B13(+) and B19(-). A unique capability of the in-plane rotation of the inner atoms against the periphery of the cluster in a chosen direction by employing circularly polarized infrared radiation has been suggested. Such fluxional behaviors in boron clusters are interesting and have been proposed as molecular Wankel motors. The concepts of aromaticity and antiaromaticity have been extended beyond organic chemistry to planar boron clusters. The validity of these concepts in understanding the electronic structures of boron clusters is evident in the striking similarities of the π-systems of planar boron clusters to those of polycyclic aromatic hydrocarbons, such as benzene, naphthalene, coronene, anthracene, or phenanthrene. Chemical bonding models developed for boron clusters not only allowed the rationalization of the stability of boron clusters but also lead to the design of novel metal-centered boron wheels with a record-setting planar coordination number of 10. The unprecedented highly coordinated borometallic molecular wheels provide insights into the interactions between transition metals and boron and expand the frontier of boron chemistry. Another interesting feature discovered through cluster studies is boron transmutation. Even though it is well-known that B(-), formed by adding one electron to boron, is isoelectronic to carbon, cluster studies have considerably expanded the possibilities of new structures and new materials using the B(-)/C analogy. It is

  3. Understanding Boron through Size-Selected Clusters: Structure, Chemical Bonding, and Fluxionality

    Energy Technology Data Exchange (ETDEWEB)

    Sergeeva, Alina P.; Popov, Ivan A.; Piazza, Zachary A.; Li, Wei-Li; Romanescu, Constantin; Wang, Lai S.; Boldyrev, Alexander I.

    2014-04-15

    Conspectus Boron is an interesting element with unusual polymorphism. While three-dimensional (3D) structural motifs are prevalent in bulk boron, atomic boron clusters are found to have planar or quasi-planar structures, stabilized by localized two-center–two-electron (2c–2e) σ bonds on the periphery and delocalized multicenter–two-electron (nc–2e) bonds in both σ and π frameworks. Electron delocalization is a result of boron’s electron deficiency and leads to fluxional behavior, which has been observed in B13+ and B19–. A unique capability of the in-plane rotation of the inner atoms against the periphery of the cluster in a chosen direction by employing circularly polarized infrared radiation has been suggested. Such fluxional behaviors in boron clusters are interesting and have been proposed as molecular Wankel motors. The concepts of aromaticity and antiaromaticity have been extended beyond organic chemistry to planar boron clusters. The validity of these concepts in understanding the electronic structures of boron clusters is evident in the striking similarities of the π-systems of planar boron clusters to those of polycyclic aromatic hydrocarbons, such as benzene, naphthalene, coronene, anthracene, or phenanthrene. Chemical bonding models developed for boron clusters not only allowed the rationalization of the stability of boron clusters but also lead to the design of novel metal-centered boron wheels with a record-setting planar coordination number of 10. The unprecedented highly coordinated borometallic molecular wheels provide insights into the interactions between transition metals and boron and expand the frontier of boron chemistry. Another interesting feature discovered through cluster studies is boron transmutation. Even though it is well-known that B–, formed by adding one electron to boron, is isoelectronic to carbon, cluster studies have considerably expanded the possibilities of new structures and new materials using the B

  4. Electrical property studies on chemically processed polypyrolle/aluminum doped ZnO based hybrid heterostructures

    Science.gov (United States)

    Mohan Kumar, G.; Ilanchezhiyan, P.; Madhan Kumar, A.; Yuldashev, Sh. U.; Kang, T. W.

    2016-04-01

    A hybrid structure based on p-type polypyrolle (PPy) and n-type aluminum (Al) doped ZnO nanorods was successfully constructed. The effect of Al doping on material properties of wurtzite structured ZnO were studied using several analytical techniques. To establish the desired hybrid structure, pyrrole monomers were polymerized on hydrothermally grown Al doped ZnO nanorods by chemical polymerization. The current⿿voltage characteristics on the fabricated PPy/Al doped ZnO heterostructures were found to exhibit excellent rectifying characteristics under dark and illumination conditions. The obtained results augment the prescribed architecture to be highly suitable for high-sensitivity optoelectronic applications.

  5. Characterization and intramolecular bonding patterns of busulfan: Experimental and quantum chemical approach

    Science.gov (United States)

    Karthick, T.; Tandon, Poonam; Singh, Swapnil; Agarwal, Parag; Srivastava, Anubha

    2017-02-01

    The investigations of structural conformers, molecular interactions and vibrational characterization of pharmaceutical drug are helpful to understand their behaviour. In the present work, the 2D potential energy surface (PES) scan has been performed on the dihedral angles C6sbnd O4sbnd S1sbnd C5 and C25sbnd S22sbnd O19sbnd C16 to find the stable conformers of busulfan. In order to show the effects of long range interactions, the structures on the global minima of PES scan have been further optimized by B3LYP/6-311 ++G(d,p) method with and without empirical dispersion functional in Gaussian 09W package. The presence of n → σ* and σ → σ* interactions which lead to stability of the molecule have been predicted by natural bond orbital analysis. The strong and weak hydrogen bonds between the functional groups of busulfan were analyzed using quantum topological atoms in molecules analysis. In order to study the long-range forces, such as van der Waals interactions, steric effect in busulfan, the reduced density gradient as well as isosurface defining these interactions has been plotted using Multiwfn software. The spectroscopic characterization on the solid phase of busulfan has been studied by experimental FT-IR and FT-Raman spectra. From the 13C and 1H NMR spectra, the chemical shifts of individual C and H atoms of busulfan have been predicted. The maximum absorption wavelengths corresponding to the electronic transitions between the highest occupied molecular orbital and the lowest unoccupied molecular orbital of busulfan have been found by UV-vis spectrum.

  6. Diversity of Chemical Bonding and Oxidation States in MS4 Molecules of Group 8 Elements.

    Science.gov (United States)

    Huang, Wei; Jiang, Ning; Schwarz, W H Eugen; Yang, Ping; Li, Jun

    2017-08-04

    The geometric and electronic ground-state structures of 30 isomers of six MS4 molecules (M=Group 8 metals Fe, Ru, Os, Hs, Sm, and Pu) have been studied by using quantum-chemical density functional theory and correlated wavefunction approaches. The MS4 species were compared to analogous MO4 species recently investigated (W. Huang, W.-H. Xu, W. H. E. Schwarz, J. Li, Inorg. Chem. 2016, 55, 4616). A metal oxidation state (MOS) with a high value of eight appeared in the low-spin singlet Td geometric species (Os,Hs)S4 and (Ru,Os,Hs)O4 , whereas a low MOS of two appeared in the high-spin septet D2d species Fe(S2 )2 and (slightly excited) metastable Fe(O2 )2 . The ground states of all other molecules had intermediate MOS values, with S(2-) , S2(2-) , S2(1-) (and O(2-) , O(1-) , O2(2-) , O2(1-) ) ligands bonded by ionic, covalent, and correlative contributions. The known tendencies toward lower MOS on going from oxides to sulfides, from Hs to Os to Ru, and from Pu to Sm, and the specific behavior of Fe, were found to arise from the different atomic orbital energies and radii of the (n-1)p core and (n-1)d and (n-2)f valence shells of the metal atoms in row n of the periodic table. The comparative results of the electronic and geometric structures of the MO4 and MS4 species provides insight into the periodicity of oxidation states and bonding. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. The adsorption of acrolein on a Pt (1 1 1): A study of chemical bonding and electronic structure

    Science.gov (United States)

    Pirillo, S.; López-Corral, I.; Germán, E.; Juan, A.

    2012-12-01

    The adsorption of acrolein on a Pt (1 1 1) surface was studied using ab-initio and semiempirical calculations. Geometry optimization and densities of states (DOS) curves were carried out using the Vienna Ab-initio Simulation Package (VASP) code. We started our study with the preferential geometries corresponding to the different acrolein/Pt (1 1 1) adsorption modes previously reported. Then, we examined the evolution of the chemical bonding in these geometries, using the crystal orbital overlap population (COOP) and overlap population (OP) analysis of selected pairs of atoms. We analyzed the acrolein intramolecular bonds, Pt (1 1 1) superficial bonds and new moleculesbnd surface formed bonds after adsorption. We found that Ptsbnd Pt bonds interacting with the molecule and acrolein Cdbnd O and Cdbnd C bonds are weakened after adsorption; this last bond is significantly linked to the surface. The obtained Csbnd Pt and Osbnd Pt OP values suggest that the most stable adsorption modes are η3-cis and η4-trans, while the η1-trans is the less favored configuration. We also found that C pz orbital and Pt pz and d orbitals participate strongly in the adsorption process.

  8. Organometallic Bonding in an Ullmann-Type On-Surface Chemical Reaction Studied by High-Resolution Atomic Force Microscopy.

    Science.gov (United States)

    Kawai, Shigeki; Sadeghi, Ali; Okamoto, Toshihiro; Mitsui, Chikahiko; Pawlak, Rémy; Meier, Tobias; Takeya, Jun; Goedecker, Stefan; Meyer, Ernst

    2016-10-01

    The on-surface Ullmann-type chemical reaction synthesizes polymers by linking carbons of adjacent molecules on solid surfaces. Although an organometallic compound is recently identified as the reaction intermediate, little is known about the detailed structure of the bonded organometallic species and its influence on the molecule and the reaction. Herein atomic force microscopy at low temperature is used to study the reaction with 3,9-diiododinaphtho[2,3-b:2',3'-d]thiophene (I-DNT-VW), which is polymerized on Ag(111) in vacuum. Thermally sublimated I-DNT-VW picks up a Ag surface atom, forming a CAg bond at one end after removing an iodine. The CAg bond is usually short-lived, and a CAgC organometallic bond immediately forms with an adjacent molecule. The existence of the bonded Ag atoms strongly affects the bending angle and adsorption height of the molecular unit. Density functional theory calculations reveal the bending mechanism, which reveals that charge from the terminus of the molecule is transferred via the Ag atom into the organometallic bond and strengths the local adsorption to the substrate. Such deformations vanish when the Ag atoms are removed by annealing and CC bonds are established.

  9. The nature of hydrogen-bonding interaction in the prototypic hybrid halide perovskite, tetragonal CH3NH3PbI3

    OpenAIRE

    June Ho Lee; Jung-Hoon Lee; Eui-Hyun Kong; Hyun Myung Jang

    2016-01-01

    In spite of the key role of hydrogen bonding in the structural stabilization of the prototypic hybrid halide perovskite, CH3NH3PbI3 (MAPbI3), little progress has been made in our in-depth understanding of the hydrogen-bonding interaction between the MA+-ion and the iodide ions in the PbI6-octahedron network. Herein, we show that there exist two distinct types of the hydrogen-bonding interaction, naming α- and β-modes, in the tetragonal MAPbI3 on the basis of symmetry argument and density-func...

  10. Two Distinct Modes of Hydrogen-Bonding Interaction in the Prototypic Hybrid Halide Perovskite, Tetragonal CH3NH3PbI3

    OpenAIRE

    Lee, June Ho; Lee, Jung-Hoon; Kong, Eui-Hyun; Jang, Hyun M.

    2015-01-01

    In spite of the key role of hydrogen bonding in the structural stabilization of the prototypic hybrid halide perovskite, CH3NH3PbI3 (MAPbI3), little progress has been made in our in-depth understanding of the hydrogen-bonding interaction between the MA+-ion and the iodide ions in the PbI6-octahedron network. Herein, we show that there exist two distinct types of the hydrogen-bonding interaction, naming a- and b-modes, in the tetragonal MAPbI3 on the basis of symmetry argument and density-func...

  11. Oxide-Free Bonding of III-V-Based Material on Silicon and Nano-Structuration of the Hybrid Waveguide for Advanced Optical Functions

    Directory of Open Access Journals (Sweden)

    Konstantinos Pantzas

    2015-10-01

    Full Text Available Oxide-free bonding of III-V-based materials for integrated optics is demonstrated on both planar Silicon (Si surfaces and nanostructured ones, using Silicon on Isolator (SOI or Si substrates. The hybrid interface is characterized electrically and mechanically. A hybrid InP-on-SOI waveguide, including a bi-periodic nano structuration of the silicon guiding layer is demonstrated to provide wavelength selective transmission. Such an oxide-free interface associated with the nanostructured design of the guiding geometry has great potential for both electrical and optical operation of improved hybrid devices.

  12. Nanoscale metals and semiconductors for the storage of solar energy in chemical bonds

    Science.gov (United States)

    Manthiram, Karthish

    The transduction of electrical energy into chemical bonds represents one potential strategy for storing energy derived from intermittent sources such as solar and wind. Driving the electrochemical reduction of carbon dioxide using light requires (1) developing light absorbers which convert photons into electron-hole pairs and (2) catalysts which utilize these electrons and holes to reduce carbon dioxide and oxidize water, respectively. For both the light absorbers and catalysts, the use of nanoscale particles is advantageous, as charge transport length scales are minimized in the case of nanoscale light absorbers and catalytic surface-area-to-volume ratio is maximized for nanoscale catalysts. In many cases, although semiconductors and metals in the form of thin films and foils are increasingly well-characterized as photoabsorbers and electrocatalysts for carbon dioxide reduction, respectively, the properties of their nanoscale counterparts remain poorly understood. This dissertation explores the nature of the light absorption mode of non-stoichiometric semiconductors which are utilized as light absorbers and the development of catalysts with enhanced stability, activity, and selectivity for carbon dioxide reduction. Chapter 1 provides an overview of the state of development of methods of transducing the energy of photons into chemical bonds. Chapters 2 and 3 investigate the development of stable, active, and selective catalysts for the electrochemical reduction of carbon dioxide. Chapter 2 examines how copper nanoparticles have enhanced activities and selectivities for methanation compared to copper foils. Chapter 3 focuses on the development of strategies to stabilize high-surface-area catalysts to prevent surface area loss during electrochemical carbon dioxide reduction. Chapters 4 and 5 entail a fundamental understanding of the light absorption mode of nanoscale photoabsorbers used in both photoelectrochemical cells and in photovoltaics. Chapter 4 focuses on the

  13. Microwave-irradiation-assisted hybrid chemical approach for titanium dioxide nanoparticle synthesis: microbial and cytotoxicological evaluation.

    Science.gov (United States)

    Ranjan, Shivendu; Dasgupta, Nandita; Rajendran, Bhavapriya; Avadhani, Ganesh S; Ramalingam, Chidambaram; Kumar, Ashutosh

    2016-06-01

    Titanium dioxide nanoparticles (TNPs) are widely used in the pharmaceutical and cosmetics industries. It is used for protection against UV exposure due to its light-scattering properties and high refractive index. Though TNPs are increasingly used, the synthesis of TNPs is tedious and time consuming; therefore, in the present study, microwave-assisted hybrid chemical approach was used for TNP synthesis. In the present study, we demonstrated that TNPs can be synthesized only in 2.5 h; however, the commonly used chemical approach using muffle furnace takes 5 h. The activity of TNP depends on the synthetic protocol; therefore, the present study also determined the effect of microwave-assisted hybrid chemical approach synthetic protocol on microbial and cytotoxicity. The results showed that TNP has the best antibacterial activity in decreasing order from Escherichia coli, Bacillus subtilis, and Staphylococcus aureus. The IC50 values of TNP for HCT116 and A549 were found to be 6.43 and 6.04 ppm, respectively. Cell death was also confirmed from trypan blue exclusion assay and membrane integrity loss was observed. Therefore, the study determines that the microwave-assisted hybrid chemical approach is time-saving; hence, this technique can be upgraded from lab scale to industrial scale via pilot plant scale. Moreover, it is necessary to find the mechanism of action at the molecular level to establish the reason for greater bacterial and cytotoxicological toxicity. Graphical abstract A graphical representation of TNP synthesis.

  14. An integrated hybrid microfluidic device for oviposition-based chemical screening of adult Drosophila melanogaster.

    Science.gov (United States)

    Leung, Jacob C K; Hilliker, Arthur J; Rezai, Pouya

    2016-02-21

    Chemical screening using Drosophila melanogaster (the fruit fly) is vital in drug discovery, agricultural, and toxicological applications. Oviposition (egg laying) on chemically-doped agar plates is an important read-out metric used to quantitatively assess the biological fitness and behavioral responses of Drosophila. Current oviposition-based chemical screening studies are inaccurate, labor-intensive, time-consuming, and inflexible due to the manual chemical doping of agar. In this paper, we have developed a novel hybrid agar-polydimethylsiloxane (PDMS) microfluidic device for single- and multi-concentration chemical dosing and on-chip oviposition screening of free-flying adult stage Drosophila. To achieve this, we have devised a novel technique to integrate agar with PDMS channels using ice as a sacrificial layer. Subsequently, we have conducted single-chemical toxicity and multiple choice chemical preference assays on adult Drosophila melanogaster using zinc and acetic acid at various concentrations. Our device has enabled us to 1) demonstrate that Drosophila is capable of sensing the concentration of different chemicals on a PDMS-agar microfluidic device, which plays significant roles in determining oviposition site selection and 2) investigate whether oviposition preference differs between single- and multi-concentration chemical environments. This device may be used to study fundamental and applied biological questions in Drosophila and other egg laying insects. It can also be extended in design to develop sophisticated and dynamic chemical dosing and high-throughput screening platforms in the future that are not easily achievable with the existing oviposition screening techniques.

  15. Chemical tailoring of hybrid sol-gel thick coatings as hosting matrix for functional patterned microstructures.

    Science.gov (United States)

    Falcaro, Paolo; Costacurta, Stefano; Malfatti, Luca; Buso, Dario; Patelli, Alessandro; Schiavuta, Piero; Piccinini, Massimo; Grenci, Gianluca; Marmiroli, Benedetta; Amenitsch, Heinz; Innocenzi, Plinio

    2011-02-01

    A phenyl-based hybrid organic - inorganic coating has been synthesized and processed by hard X-ray lithography. The overall lithography process is performed in a two-step process only (X-rays exposure and chemical etching). The patterns present high aspect ratio, sharp edges, and high homogeneity. The coating has been doped with a variety of polycyclic aromatic hydrocarbon functional molecules, such as anthracene, pentacene, and fullerene. For the first time, hard X-rays have been combined with thick hybrid functional coatings, using the sol-gel thick film directly as resist. A new technique based on a new material combined with hard X-rays is now available to fabricate optical devices. The effect due to the high-energy photon exposure has been investigated using FT-IR and Raman spectroscopy, laser scanner, optical profilometer, and confocal and electron microscope. High-quality thick hybrid fullerene-doped microstructures have been fabricated.

  16. Effective use of physical/chemical mutagens in crop hybrid breeding in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu Luxiang; Wang Jing [Chinese Academy of Agricultural Sciences, Institute for Application of Atomic Energy, Beijing (China)

    2001-03-01

    Crop heterosis utilization was one of the greatest achievements in the agriculture production in the 20th century. It is proved that every breakthrough in crop hybrid breeding was predicated on the discovery or successful development of new heterosis germplasm. In recent years, in order to open up the scope and ways of using crop heterosis, it has been paid much close attention to apply mutation techniques to hybrid breeding. Useful tool materials like male sterile mutant lines, fertile restoration mutants in many crops have been obtained by effective use of physical/chemical mutagens. Brief introduction is made in this paper on the newest research improvement concerning the effective use of the techniques of mutation induction in China to create special useful genes, enrich the diversity of germplasm and promote the rapid development of crop hybrid breeding. (author)

  17. Improvement of Fracture Toughness in Epoxy Nanocomposites through Chemical Hybridization of Carbon Nanotubes and Alumina

    Science.gov (United States)

    Zakaria, Muhammad Razlan; Abdul Kudus, Muhammad Helmi; Md. Akil, Hazizan; Zamri, Mohd Hafiz

    2017-01-01

    The current study investigated the effect of adding a carbon nanotube–alumina (CNT–Al2O3) hybrid on the fracture toughness of epoxy nanocomposites. The CNT–Al2O3 hybrid was synthesised by growing CNTs on Al2O3 particles via the chemical vapour deposition method. The CNTs were strongly attached onto the Al2O3 particles, which served to transport and disperse the CNTs homogenously, and to prevent agglomeration in the CNTs. The experimental results demonstrated that the CNT–Al2O3 hybrid-filled epoxy nanocomposites showed improvement in terms of the fracture toughness, as indicated by an increase of up to 26% in the critical stress intensity factor, K1C, compared to neat epoxy. PMID:28772663

  18. Chemical reactivity of C-F bonds attached to graphene with diamines depending on their nature and location.

    Science.gov (United States)

    Li, Baoyin; He, Taijun; Wang, Zaoming; Cheng, Zheng; Liu, Yang; Chen, Teng; Lai, Wenchuan; Wang, Xu; Liu, Xiangyang

    2016-06-29

    The attachment of fluorine to graphene is a facile means to activate the carbon bonds for subsequent covalent bonding to other molecules for the preparation of desired graphene derivatives. Therefore, an insight into the chemical reactivity of fluorinated graphene (FG) is very essential to enable precise control of the composition and structure of the final products. In this study, FG has been treated with various mass amounts of poly(oxypropylene)diamine (PEA) ranging from starvation to saturation to explore the dependence of a substitution reaction of diamines on the nature and location (attached onto the basal planes or along defects or edges) of C-F bonds. X-ray photoelectron spectroscopy directly tracked the atomic percentage of fluorine present and the carbon 1s bonding state, showing that the grafting ratio of diamines gradually increases with increased diamine mass ratio. The varying of the types and orientation of C-F bonds characterized by polarized attenuated total reflectance Fourier transform infrared spectroscopy indicates that "covalent" C-F bonds are more sensitive to the substitution reaction of diamines than ''semi-ionic'' C-F bonds, and the C-F bonds attached onto basal planes more preferably participate in the functionalization reaction of diamines than that of C-F bonded on non-coplanar regions (edges or defects). The one-dimensional expansion along the graphene c-axis shown by wide angle X-ray diffraction provides further evidence on the preferred functionalization reaction of C-F attached on the basal planes, resulting in a change of the average intersheet distance by various magnitudes.

  19. Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME).

    Science.gov (United States)

    Alhooshani, Khalid; Kim, Tae-Young; Kabir, Abuzar; Malik, Abdul

    2005-01-07

    A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).

  20. Influence of chemical bonding of chlorides with aluminates in cement hidratation process on corrosion steel bars in concrete

    Directory of Open Access Journals (Sweden)

    Bikić Farzet H.

    2010-01-01

    Full Text Available The presence of chlorides in concrete is a permanent subject of research because they cause corrosion of steel bars. Chlorides added to the concrete during preparation, as accelerators of the bonding of cement minerals process, enter into reaction with aluminates, creating a phase known as chloroaluminate hydrates. In everyday conditions the product of chemical bonding between chlorides and aluminates is usually monochloridealuminate C3A·CaCl2·Hx, better known as Friedel's salt. In this paper, the influence of chemical bonding of chlorides with aluminates during the process of cement hydration on corrosion of steel bars in concrete was investigated. The process of chlorides bonding with aluminates yielding monochloride aluminate is monitored by XRD analyses. It was found that the amount of chlorides bonding with aluminates increases with an increase of temperature, and as a result, reduces the amount of 'free' chlorides in concrete. Potentiodynamic measurements have shown that increase in temperature of the heat treatment of working electrodes by chlorides leads to a reduction of steel bars corrosion as a result of either the increase of the monochloride-aluminate content or the decrease of free chlorides amount. Chlorides bound in chloroaluminate hydrates do not cause activation of steel bars corrosion in concrete. It was also proven that the increase of free chlorides concentration in the concrete leads to intensification of steel bars corrosion. This additionally approves that free chlorides are only the activators of process of steel bars corrosion in the concrete.

  1. Stabilization of Rocky Flats Pu-contaminated ash within chemically bonded phosphate ceramics

    Science.gov (United States)

    Wagh, A. S.; Strain, R.; Jeong, S. Y.; Reed, D.; Krause, T.; Singh, D.

    A feasibility study was conducted on the use of chemically bonded phosphate ceramics for stabilization of combustion residue of high transuranic (TRU) wastes. Using a matrix of magnesium potassium phosphate formed by the room-temperature reaction of MgO and KH 2PO 4 solution, we made waste forms that contained 5 wt% Pu to satisfy the requirements of the Waste Isolation Pilot Plant. The waste forms were ceramics whose compression strength was twice that of conventional cement grout and whose connected porosity was ≈50% that of cement grout. Both surrogate and actual waste forms displayed high leaching resistance for both hazardous metals and Pu. Hydrogen generation resulting from the radiolytic decomposition of water and organic compounds present in the waste form did not appear to be a significant issue. Pu was present as PuO 2 that was physically microencapsulated in the matrix. In the process, pyrophoricity was removed and leaching resistance was enhanced. The high leaching resistance was due to the very low solubility of PuO 2 coupled with superior microencapsulation. As a result, the waste forms satisfied the current Safeguard Termination Limit requirement for storage of TRU combustion residues.

  2. Chemical Bonding States of TiC Films before and after Hydrogen Ion Irradiation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    TiC films deposited by rf magnetron sputtering followed by Ar+ ion bombardment were irradiated with a hydrogen ion beam. X-ray photoelectron spectroscopy (XPS) was used for characterization of the chemical bonding states of C and Ti elements of the TiC films before and after hydrogen ion irradiation, in order to understand the effect of hydrogen ion irradiation on the films and to study the mechanism of hydrogen resistance of TiC films. Conclusions can be drawn that ion bombardment at moderate energy can cause preferential physical sputtering of carbon atoms from the surface of low atomic number (Z) material. This means that ion beam bombardment leads to the formation of a non-stoichiometric composition of TiC on the surface.TiC films prepared by ion beam mixing have the more excellent characteristic of hydrogen resistance. One important cause, in addition to TiC itself, is that there are many vacant sites in TiC created by ion beam mixing.These defects can easily trap hydrogen and effectively enhance the effect of hydrogen resistance.

  3. Microstructure and chemical bond evolution of diamond-like carbon films machined by femtosecond laser

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing; Wang, Chunhui [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Liu, Yongsheng, E-mail: yongshengliu@nwpu.edu.cn [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Cheng, Laifei [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Li, Weinan [State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 10068 (China); Zhang, Qing [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Yang, Xiaojun [State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 10068 (China)

    2015-06-15

    Highlights: • The machining depth was essentially proportional to the laser power. • The well patterned microgrooves and ripple structures with nanoparticles were formed distinctly in the channels. And the number of nanoparticles increased with the processing power as well. • It revealed a conversion from amorphous carbon to nanocrystalline graphite after laser treated with increasing laser power. • It showed that a great decrease of sp{sup 3}/sp{sup 2} after laser treatment. - Abstract: Femtosecond laser is of great interest for machining high melting point and hardness materials such as diamond-like carbon, SiC ceramic, et al. In present work, the microstructural and chemical bond evolution of diamond-like carbon films were investigated using electron microscopy and spectroscopy techniques after machined by diverse femtosecond laser power in air. The results showed the machining depth was essentially proportional to the laser power. The well patterned microgrooves and ripple structures with nanoparticles were formed distinctly in the channels. Considering the D and G Raman band parameters on the laser irradiation, it revealed a conversion from amorphous carbon to nanocrystalline graphite after laser treated with increasing laser power. X-ray photoelectron spectroscopy analysis showed a great decrease of sp{sup 3}/sp{sup 2} after laser treatment.

  4. Chemical Bonding of Transition-Metal Co13 Clusters with Graphene.

    Science.gov (United States)

    Alonso-Lanza, Tomás; Ayuela, Andrés; Aguilera-Granja, Faustino

    2015-12-01

    We carried out density functional calculations to study the adsorption of Co13 clusters on graphene. Several free isomers were deposited at different positions with respect to the hexagonal lattice nodes, allowing us to study even the hcp 2d isomer, which was recently obtained as the most stable one. Surprisingly, the Co13 clusters attached to graphene prefer icosahedron-like structures in which the low-lying isomer is much distorted; in such structures, they are linked with more bonds than those reported in previous works. For any isomer, the most stable position binds to graphene by the Co atoms that can lose electrons. We find that the charge transfer between graphene and the clusters is small enough to conclude that the Co-graphene binding is not ionic-like but chemical. Besides, the same order of stability among the different isomers on doped graphene is kept. These findings could also be of interest for magnetic clusters on graphenic nanostructures such as ribbons and nanotubes.

  5. Hybrid two-dimensional electronic systems and other applications of sp-2 bonded light elements

    Science.gov (United States)

    Kessler, Brian Maxwell

    The field-effect is a cornerstone of modern technology lying at the heart of transistors in consumer electronics. Experimentally, it allows one to continuously vary the carrier concentration in a material while studying its properties. The recent isolation of graphene, the first truly two-dimensional crystal, allows application of the field effect to a much wider range of physical situations. In the first part of the thesis, we investigate hybrid materials formed by coupling metals to the two-dimensional electron gas (2DEG) in graphene. We couple superconducting materials to the graphene sheet by cluster deposition. This material displays a superconducting phase whose properties are tuned by the carrier density via the field effect. The transition temperature is well-described by Berezinskii-Kosterlitz-Thouless vortex unbinding. The ground state properties show interesting effects due to the distribution of cluster spacings. Observations related to other hybrid electronic systems including ferromagnets and normal metals are presented. The second part of this thesis involves energy applications of light element materials. The mechanisms affecting coating of carbon nanotubes using atomic layer deposition is developed and applied to photovoltaic systems. The gas adsorption properties of activated boron nitride are investigated and the relative influence of surface area and hydrogen binding affinity is elaborated. The third part of this thesis explores electromechanical properties of suspended graphene membranes. We investigate buckling and strain in exfoliated graphene membranes as well as their deformation under an applied gate potential.

  6. Chemically Integrated Inorganic-Graphene Two-Dimensional Hybrid Materials for Flexible Energy Storage Devices.

    Science.gov (United States)

    Peng, Lele; Zhu, Yue; Li, Hongsen; Yu, Guihua

    2016-12-01

    State-of-the-art energy storage devices are capable of delivering reasonably high energy density (lithium ion batteries) or high power density (supercapacitors). There is an increasing need for these power sources with not only superior electrochemical performance, but also exceptional flexibility. Graphene has come on to the scene and advancements are being made in integration of various electrochemically active compounds onto graphene or its derivatives so as to utilize their flexibility. Many innovative synthesis techniques have led to novel graphene-based hybrid two-dimensional nanostructures. Here, the chemically integrated inorganic-graphene hybrid two-dimensional materials and their applications for energy storage devices are examined. First, the synthesis and characterization of different kinds of inorganic-graphene hybrid nanostructures are summarized, and then the most relevant applications of inorganic-graphene hybrid materials in flexible energy storage devices are reviewed. The general design rules of using graphene-based hybrid 2D materials for energy storage devices and their current limitations and future potential to advance energy storage technologies are also discussed.

  7. Role of the chemical bonding for the time-dependent electron transport through an interacting quantum dot

    KAUST Repository

    Goker, Ali

    2011-06-01

    A combination of ab initio and many-body calculations is utilized to determine the effects of the bonding in Au electrodes on the time dependent current through a quantum dot suddenly shifted into the Kondo regime by a gate voltage. For an asymmetrically coupled system the instantaneous conductance exhibits fluctuations. The frequencies of the fluctuations turn out to be proportional to the energetic separation between the dominating peaks in the density of states and the Fermi level. The chemical bonding in the electrodes, thus, drastically alters the transient current, which can be accessed by ultrafast pump-probe techniques. © 2011 Elsevier B.V. All rights reserved.

  8. Chemical origin of blue- and redshifted hydrogen bonds: intramolecular hyperconjugation and its coupling with intermolecular hyperconjugation.

    Science.gov (United States)

    Li, An Yong

    2007-04-21

    Upon formation of a H bond Y...H-XZ, intramolecular hyperconjugation n(Z)-->sigma*(X-H) of the proton donor plays a key role in red- and blueshift characters of H bonds and must be introduced in the concepts of hyperconjugation and rehybridization. Intermolecular hyperconjugation transfers electron density from Y to sigma*(X-H) and causes elongation and stretch frequency redshift of the X-H bond; intramolecular hyperconjugation couples with intermolecular hyperconjugation and can adjust electron density in sigma*(X-H); rehybridization causes contraction and stretch frequency blueshift of the X-H bond on complexation. The three factors--intra- and intermolecular hyperconjugations and rehybridization--determine commonly red- or blueshift of the formed H bond. A proton donor that has strong intramolecular hyperconjugation often forms blueshifted H bonds.

  9. Differential stability of 2'F-ANA*RNA and ANA*RNA hybrid duplexes: roles of structure, pseudohydrogen bonding, hydration, ion uptake and flexibility.

    Science.gov (United States)

    Watts, Jonathan K; Martín-Pintado, Nerea; Gómez-Pinto, Irene; Schwartzentruber, Jeremy; Portella, Guillem; Orozco, Modesto; González, Carlos; Damha, Masad J

    2010-04-01

    Hybrids of RNA with arabinonucleic acids 2'F-ANA and ANA have very similar structures but strikingly different thermal stabilities. We now present a thorough study combining NMR and other biophysical methods together with state-of-the-art theoretical calculations on a fully modified 10-mer hybrid duplex. Comparison between the solution structure of 2'F-ANA*RNA and ANA*RNA hybrids indicates that the increased binding affinity of 2'F-ANA is related to several subtle differences, most importantly a favorable pseudohydrogen bond (2'F-purine H8) which contrasts with unfavorable 2'-OH-nucleobase steric interactions in the case of ANA. While both 2'F-ANA and ANA strands maintained conformations in the southern/eastern sugar pucker range, the 2'F-ANA strand's structure was more compatible with the A-like structure of a hybrid duplex. No dramatic differences are found in terms of relative hydration for the two hybrids, but the ANA*RNA duplex showed lower uptake of counterions than its 2'F-ANA*RNA counterpart. Finally, while the two hybrid duplexes are of similar rigidities, 2'F-ANA single strands may be more suitably preorganized for duplex formation. Thus the dramatically increased stability of 2'F-ANA*RNA and ANA*RNA duplexes is caused by differences in at least four areas, of which structure and pseudohydrogen bonding are the most important.

  10. [Intramolecular hygrogen bonds in conformers of 2'-deoxycytidine: results of quantum-chemical analysis of electron density topology].

    Science.gov (United States)

    Zhurakivs'kyĭ, R O; Hovorun, D M

    2006-01-01

    As many as 13 types of intramolecular hygrogen bonds are determined in 89 conformers of 2'-deoxycytidine nucleoside by means of quantum-chemical analysis (at DFT B3LYP/6-31G(d,p) theory level) of electron density topology with Atoms-in-Molecules (AIM) theory. The total number of H-bonds is 168 and their types are C1'H...O2, C2'H2...O5', C2'H2...O2, C3'H...O2, C5'H1...O2, C5'H2...O2, C6H...O4', C6H...O5', C3'H...HC6, O3'H...O5', O5'H...O3', O5'H...O4' and O5'H...O2. Conformational, geometric and electron-topological properties of H-bonds are presented.

  11. Chemical bonding and the incorporation of potassium into the Earth's core

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, D.M. (Geological Survey, Denver, CO (USA))

    1990-05-01

    It has been argued that most of the Earth's potassium was segregated into the outer core and that the radioactive decay of {sup 40}K provided the heat source for the geodynamo. This idea rests on the assumption that the affinity of potassium for sulfur or metallic iron is enhanced at high pressure. In this paper, the high pressure electronic structures of K in sulfide, iron sulfide and metallic iron coordination environments were determined from molecular orbital (SCF-X{alpha}-SW) calculations on (KS{sub 8}){sup 15{minus}}, (KS{sub 8}Fe{sub 6}){sup 3{minus}} and KFe{sub 14} clusters. It is shown that, even at high pressure, potassium cannot alloy with metallic iron. Although a high-pressure electronic transition may enhance the potassium-sulfur chemical bond, the electronic structure of the KS{sub 8}Fe{sub 6} cluster shows that this electronic transition cannot happen in an iron sulfide melt. Consequently, potassium will not have an enhanced affinity for sulfur in planetary interiors. If the lower mantle were more reducing, potassium might be excluded from the silicate phases by more strongly lithophile elements and segregated into a metal sulfide phase in the outer core (cf. the phase assemblages in enstatite chondrites). Given the oxidation state of the Earth, however, it is unlikely that significant quantities of potassium have been incorporated into the outer core. The Earth, like the moon and the eucrite parent body, is depleted in potassium. An alternative heat source (e.g., the radioactive decay of U and Th) must be invoked to explain the geodynamo.

  12. A Simple Visualization of Double Bond Properties: Chemical Reactivity and UV Fluorescence

    Science.gov (United States)

    Grayson, Scott M.

    2012-01-01

    A simple, easily visualized thin-layer chromatography (TLC) staining experiment is presented that highlights the difference in reactivity between aromatic double bonds and nonaromatic double bonds. Although the stability of aromatic systems is a major theme in organic chemistry, the concept is rarely reinforced "visually" in the undergraduate…

  13. A Simple Visualization of Double Bond Properties: Chemical Reactivity and UV Fluorescence

    Science.gov (United States)

    Grayson, Scott M.

    2012-01-01

    A simple, easily visualized thin-layer chromatography (TLC) staining experiment is presented that highlights the difference in reactivity between aromatic double bonds and nonaromatic double bonds. Although the stability of aromatic systems is a major theme in organic chemistry, the concept is rarely reinforced "visually" in the undergraduate…

  14. Principles and applications of halogen bonding in medicinal chemistry and chemical biology.

    Science.gov (United States)

    Wilcken, Rainer; Zimmermann, Markus O; Lange, Andreas; Joerger, Andreas C; Boeckler, Frank M

    2013-02-28

    Halogen bonding has been known in material science for decades, but until recently, halogen bonds in protein-ligand interactions were largely the result of serendipitous discovery rather than rational design. In this Perspective, we provide insights into the phenomenon of halogen bonding, with special focus on its role in drug discovery. We summarize the theoretical background defining its strength and directionality, provide a systematic analysis of its occurrence and interaction geometries in protein-ligand complexes, and give recent examples where halogen bonding has been successfully harnessed for lead identification and optimization. In light of these data, we discuss the potential and limitations of exploiting halogen bonds for molecular recognition and rational drug design.

  15. Research on the Interaction of Hydrogen-Bond Acidic Polymer Sensitive Sensor Materials with Chemical Warfare Agents Simulants by Inverse Gas Chromatography

    OpenAIRE

    Liu Yang; Qiang Han; Shuya Cao; Feng Huang; Molin Qin; Chenghai Guo; Mingyu Ding

    2015-01-01

    Hydrogen-bond acidic polymers are important high affinity materials sensitive to organophosphates in the chemical warfare agent sensor detection process. Interactions between the sensor sensitive materials and chemical warfare agent simulants were studied by inverse gas chromatography. Hydrogen bonded acidic polymers, i.e., BSP3, were prepared for micro-packed columns to examine the interaction. DMMP (a nerve gas simulant) and 2-CEES (a blister agent simulant) were used as probes. Chemical an...

  16. Ormocer: An aesthetic direct restorative material; An in vitro study comparing the marginal sealing ability of organically modified ceramics and a hybrid composite using an ormocer-based bonding agent and a conventional fifth-generation bonding agent

    Directory of Open Access Journals (Sweden)

    Sarika Kalra

    2012-01-01

    Full Text Available Aims and Objectives : To compare the marginal sealing ability of ormocer with a hybrid composite using an ormocer based bonding agent and a conventional fifth generation bonding agent. Materials and Methods : Fifty four human premolars were randomly distributed into four test groups of 12 teeth each and two control groups of 3 teeth each. Class I occlusal preparation of 1.5 mm depth were made in each tooth. These were restored using the adhesive and restorative material according to the group. The restorations were finished using a standard composite finishing and polishing kit. Thermocycling between 5 o C and 55 o C was carried out. Having blocked the root apex and the entire tooth surface except 1 mm around the restoration margin, the teeth were immersed in 2% methylene blue for 48 hours, after which the dye penetration through the margins of each sample was studied under a stereomicroscope. Results and Discussion : Group IV (Admira with Admira Bond showed the minimum marginal leakage with a mean of 0.200 mm. Four samples in this group showed no microleakage at all and a maximum of 0.400 mm was seen in one sample. Group II (Spectrum TPH with Admira Bond showed the maximum leakage with a mean of 0.433 mm. One sample showed as much as 1.00 mm of microleakage. Admira when used with Admira Bond showed lesser microleakage than Spectrum TPH used with Prime & Bond NT, the difference being statistically insignificant.

  17. The Load and Time Dependence of Chemical Bonding-Induced Frictional Ageing of Silica at the Nanoscale

    Science.gov (United States)

    Tian, K.; Gosvami, N. N.; Goldsby, D. L.; Carpick, R. W.

    2015-12-01

    Rate and state friction (RSF) laws are empirical relationships that describe the frictional behavior of rocks and other materials in experiments, and reproduce a variety of observed natural behavior when employed in earthquake models. A pervasive observation from rock friction experiments is the linear increase of static friction with the log of contact time, or 'ageing'. Ageing is usually attributed to an increase in real area of contact associated with asperity creep. However, recent atomic force microscopy (AFM) experiments demonstrate that ageing of nanoscale silica-silica contacts is due to progressive formation of interfacial chemical bonds in the absence of plastic deformation, in a manner consistent with the multi-contact ageing behavior of rocks [Li et al., 2011]. To further investigate chemical bonding-induced ageing, we explored the influence of normal load (and thus contact normal stress) and contact time on ageing. Experiments that mimic slide-hold-slide rock friction experiments were conducted in the AFM for contact loads and hold times ranging from 23 to 393 nN and 0.1 to 100 s, respectively, all in humid air (~50% RH) at room temperature. Experiments were conducted by sequentially sliding the AFM tip on the sample at a velocity V of 0.5 μm/s, setting V to zero and holding the tip stationary for a given time, and finally resuming sliding at 0.5 μm/s to yield a peak value of friction followed by a drop to the sliding friction value. Chemical bonding-induced ageing, as measured by the peak friction minus the sliding friction, increases approximately linearly with the product of normal load and the log of the hold time. Theoretical studies of the roles of reaction energy barriers in nanoscale ageing indicate that frictional ageing depends on the total number of reaction sites and the hold time [Liu & Szlufarska, 2012]. We combine chemical kinetics analyses with contact mechanics models to explain our results, and develop a new approach for curve

  18. Design and Characterization of Liquidlike POSS-Based Hybrid Nanomaterials Synthesized via Ionic Bonding and Their Interactions with CO 2

    KAUST Repository

    Petit, Camille

    2013-10-01

    Liquidlike nanoparticle organic hybrid materials (NOHMs) were designed and synthesized by ionic grafting of polymer chains onto nanoscale silica units called polyhedral oligomeric silsesquioxane (POSS). The properties of these POSS-based NOHMs relevant to CO2 capture, in particular thermal stability, swelling, viscosity, as well as their interactions with CO 2, were investigated using thermogravimetric analyses, differential scanning calorimetry, and NMR and ATR FT-IR spectroscopies. The results indicate that POSS units significantly enhance the thermal stability of the hybrid materials, and their porous nature also contributes to the overall CO 2 capture capacity of NOHMs. The viscosity of the synthesized NOHMs was comparable to those reported for ionic liquids, and rapidly decreased as the temperature increased. The sorption of CO2 in POSS-based NOHMs also reduced their viscosities. The swelling behavior of POSS-based NOHMs was similar to that of previously studied nanoparticle-based NOHMs, and this generally resulted in less volume increase in NOHMs compared to their corresponding polymers for the same amount of CO2 loading. © 2013 American Chemical Society.

  19. Determining Chemical Reactivity Driving Biological Activity from SMILES Transformations: The Bonding Mechanism of Anti-HIV Pyrimidines

    Directory of Open Access Journals (Sweden)

    Mihai V. Putz

    2013-07-01

    Full Text Available Assessing the molecular mechanism of a chemical-biological interaction and bonding stands as the ultimate goal of any modern quantitative structure-activity relationship (QSAR study. To this end the present work employs the main chemical reactivity structural descriptors (electronegativity, chemical hardness, chemical power, electrophilicity to unfold the variational QSAR though their min-max correspondence principles as applied to the Simplified Molecular Input Line Entry System (SMILES transformation of selected uracil derivatives with anti-HIV potential with the aim of establishing the main stages whereby the given compounds may inhibit HIV infection. The bonding can be completely described by explicitly considering by means of basic indices and chemical reactivity principles two forms of SMILES structures of the pyrimidines, the Longest SMILES Molecular Chain (LoSMoC and the Branching SMILES (BraS, respectively, as the effective forms involved in the anti-HIV activity mechanism and according to the present work, also necessary intermediates in molecular pathways targeting/docking biological sites of interest.

  20. Determining chemical reactivity driving biological activity from SMILES transformations: the bonding mechanism of anti-HIV pyrimidines.

    Science.gov (United States)

    Putz, Mihai V; Dudaş, Nicoleta A

    2013-07-30

    Assessing the molecular mechanism of a chemical-biological interaction and bonding stands as the ultimate goal of any modern quantitative structure-activity relationship (QSAR) study. To this end the present work employs the main chemical reactivity structural descriptors (electronegativity, chemical hardness, chemical power, electrophilicity) to unfold the variational QSAR though their min-max correspondence principles as applied to the Simplified Molecular Input Line Entry System (SMILES) transformation of selected uracil derivatives with anti-HIV potential with the aim of establishing the main stages whereby the given compounds may inhibit HIV infection. The bonding can be completely described by explicitly considering by means of basic indices and chemical reactivity principles two forms of SMILES structures of the pyrimidines, the Longest SMILES Molecular Chain (LoSMoC) and the Branching SMILES (BraS), respectively, as the effective forms involved in the anti-HIV activity mechanism and according to the present work, also necessary intermediates in molecular pathways targeting/docking biological sites of interest.

  1. Bond Strength between Hybrid Fiber-Reinforced Lightweight Aggregate Concrete Substrate and Self-Compacting Concrete as Topping Layer

    Directory of Open Access Journals (Sweden)

    Slamet Widodo

    2017-01-01

    Full Text Available Structural performance evaluation of composite concrete slabs that were constructed using partially precast concreting system which utilized Hybrid Fiber-Reinforced Lightweight Aggregate Concrete (HyFRLWAC as stay in-place formwork and self-compacting concrete (SCC as topping layer was conducted in this research. This paper focused on determining the appropriate strength limit criteria of interface between two different concrete layers. The tensile strength was tested using pull-off test, while concrete cohesion was investigated based on modified bisurface shear test, and dual L-shaped shear test was used to determine the effect of normal force on the shear strength of concrete interface. Sample variants were designed based on the substrate surface conditions, compressive strength of the topping layer, and magnitude of perpendicular normal force acting on interface area. The substrate surfaces were prepared in as-placed and grooved conditions for tensile test, cohesion, and shear strength test. Test results indicate that tensile strength, cohesion, and shear strength of the concrete interface are affected by surface condition of the substrate, compressive strength of the topping layer, and the normal force acting perpendicularly on the concrete interface area. Proposed formulation for bond strength prediction between HyFRLWAC as substrate and SCC as topping layer is also presented in this paper.

  2. Controlling chemical dosing for sulfide mitigation in sewer networks using a hybrid automata control strategy.

    Science.gov (United States)

    Liu, Yiqi; Ganigué, Ramon; Sharma, Keshab; Yuan, Zhiguo

    2013-01-01

    Chemicals such as magnesium hydroxide (Mg(OH)2) and iron salts are widely used to control sulfide-induced corrosion in sewer networks composed of interconnected sewer pipe lines and pumping stations. Chemical dosing control is usually non-automatic and based on experience, thus often resulting in sewage reaching the discharge point receiving inadequate or even no chemical dosing. Moreover, intermittent operation of pumping stations makes traditional control theory inadequate. A hybrid automata-based (HA-based) control method is proposed in this paper to coordinate sewage pumping station operations by considering their states, thereby ensuring suitable chemical concentrations in the network discharge. The performance of the proposed control method was validated through a simulation study of a real sewer network using real sewage flow data. The physical, chemical and biological processes were simulated using the well-established SeweX model. The results suggested that the HA-based control strategy significantly improved chemical dosing control performance and sulfide mitigation in sewer networks, compared to the current common practice.

  3. Indications of chemical bond contrast in AFM images of a hydrogen-terminated silicon surface

    Science.gov (United States)

    Labidi, Hatem; Koleini, Mohammad; Huff, Taleana; Salomons, Mark; Cloutier, Martin; Pitters, Jason; Wolkow, Robert A.

    2017-02-01

    The origin of bond-resolved atomic force microscope images remains controversial. Moreover, most work to date has involved planar, conjugated hydrocarbon molecules on a metal substrate thereby limiting knowledge of the generality of findings made about the imaging mechanism. Here we report the study of a very different sample; a hydrogen-terminated silicon surface. A procedure to obtain a passivated hydrogen-functionalized tip is defined and evolution of atomic force microscopy images at different tip elevations are shown. At relatively large tip-sample distances, the topmost atoms appear as distinct protrusions. However, on decreasing the tip-sample distance, features consistent with the silicon covalent bonds of the surface emerge. Using a density functional tight-binding-based method to simulate atomic force microscopy images, we reproduce the experimental results. The role of the tip flexibility and the nature of bonds and false bond-like features are discussed.

  4. Bader’s Theory of Atoms in Molecules (AIM) and its Applications to Chemical Bonding

    Indian Academy of Sciences (India)

    P SHYAM VINOD KUMAR; V RAGHAVENDRA; V SUBRAMANIAN

    2016-10-01

    In this perspective article, the basic theory and applications of the “Quantum Theory of Atoms in Molecules” have been presented with examples from different categories of weak and hydrogen bonded molecular systems.

  5. Indications of chemical bond contrast in AFM images of a hydrogen-terminated silicon surface

    Science.gov (United States)

    Labidi, Hatem; Koleini, Mohammad; Huff, Taleana; Salomons, Mark; Cloutier, Martin; Pitters, Jason; Wolkow, Robert A.

    2017-01-01

    The origin of bond-resolved atomic force microscope images remains controversial. Moreover, most work to date has involved planar, conjugated hydrocarbon molecules on a metal substrate thereby limiting knowledge of the generality of findings made about the imaging mechanism. Here we report the study of a very different sample; a hydrogen-terminated silicon surface. A procedure to obtain a passivated hydrogen-functionalized tip is defined and evolution of atomic force microscopy images at different tip elevations are shown. At relatively large tip-sample distances, the topmost atoms appear as distinct protrusions. However, on decreasing the tip-sample distance, features consistent with the silicon covalent bonds of the surface emerge. Using a density functional tight-binding-based method to simulate atomic force microscopy images, we reproduce the experimental results. The role of the tip flexibility and the nature of bonds and false bond-like features are discussed. PMID:28194036

  6. Chemical composition of the volatile oil from flowers and leaves of new Passiflora hybrids

    Directory of Open Access Journals (Sweden)

    Jacopo Calevo

    2016-10-01

    Full Text Available Summary. Passiflora is a genus of the Passifloraceae family with more than five hundred species, which are known for their edible fruits, their therapeutic properties and ornamental purposes, and they are very attractive both for the horticultural sector as well as for the herbal and pharmaceutical industry. A detailed chemical composition of Passiflora essential oil has been reported only for few main species (e.g. P. edulis Sims and P. incarnata L.. In this article we evaluated for the first time the essential oil composition of three Passiflora ornamental hybrids, exploring fresh flowers and leaves by GC/FID and GC/MS. Several compounds were identified, with a peculiar distribution in the hybrids: benzyl alcohol (7.6%, geraniol (13.7%, phytol (14,3%, eugenol (3.9%, 2-phenylethanol (4.7%, cis-3-hexenal (2.8% and palmitic acid (2% were the main compounds of the essential oil of fresh leaves of the hybrid P. ‘FSO-040711’; the highest percentages of benzyl alcohol (12.2% and 2-phenylethanol (13.6% were found in fresh flowers of P. ‘FSO-130913’ and  the highest amount of phytol (38.5% was present in the fresh leaves of P. ‘FSO-080415’. Eugenol (5.3% seems to be related to the typical honey/vanilla fragrance of the flowers of P. ‘FSO-040711’. Industrial relevance. The main bulk of constituents of the volatile fractions of Passiflora hybrids were found to be hydrocarbons and alcohols, while terpens and aldehydes occurred in lower amount. We are currently focus on investigating the biological activity of the Passiflora oil extracts for perfumery and cosmetic industry. Keywords. Maracuja; interspecific hybrids; essential oil; gas chromatography

  7. Chemical-assisted bonding of thermoplastics/elastomer for fabricating microfluidic valves.

    Science.gov (United States)

    Gu, Pan; Liu, Ke; Chen, Hong; Nishida, Toshikazu; Fan, Z Hugh

    2011-01-01

    Thermoplastics such as cyclic olefin copolymer (COC) and polymethylmethacrylate (PMMA) have been increasingly used in fabricating microfluidic devices. However, the state-of-the-art microvalve technology is a polydimethylsiloxane (PDMS)-based three-layer structure. In order to integrate such a valve with a thermoplastics-based microfluidic device, a bonding method for thermoplastics/PDMS must be developed. We report here a method to bond COC with PDMS through surface activation by corona discharge, surface modification using 3-(trimethoxysilyl)propyl methacrylate (TMSPMA), and thermal annealing. The method is also applicable to PMMA. The bonding strength between thermoplastics and PDMS was represented by the peeling force, which was measured using a method established by the International Organization for Standardization (ISO). The bonding strength measurement offered an objective and quantitative indicator for protocol optimization, as well as comparison with other PDMS-associated bonding methods. Using optimized bonding conditions, two valve arrays were fabricated in a COC/PDMS/COC device and cyclic operations of valve closing/opening were successfully demonstrated. The valve-containing devices withstood 100 psi (∼689 KPa) without delamination. Further, we integrated such valve arrays in a device for protein separation and demonstrated isoelectric focusing in the presence of valves.

  8. Chemical bonding between antimony and ionic liquid-derived nitrogen-doped carbon for sodium-ion battery anode

    Science.gov (United States)

    Xu, Xin; Si, Ling; Zhou, Xiaosi; Tu, Fengzhang; Zhu, Xiaoshu; Bao, Jianchun

    2017-05-01

    Antimony has received a great deal of attention as a promising anode material for sodium-ion batteries (SIBs) due to its high theoretical capacity of 660 mAh g-1. However, this application is significantly hampered by inherent large volume change and sluggish kinetics. To address these issues, an antimony-cyano-based ionic liquid-derived nitrogen-doped carbon (Sbsbnd CNC) hybrid is proposed and synthesized by ball-milling and subsequent pyrolysis treatment. As an anode material for SIBs, the as-synthesized Sbsbnd CNC hybrid delivers reversible capacities of 475 mAh g-1 at a current density of 100 mA g-1 and 203 mAh g-1 at 5000 mA g-1, and a 92.4% capacity retention based on the first-cycle capacity after 150 cycles at 100 mA g-1. Using ex situ X-ray photoelectron spectroscopy and elemental mapping techniques, we attribute the good structural integrity to the formation of Sbsbnd Nsbnd C bonds between Sb and the cyano-based ionic liquid-derived N-doped carbon matrix. Moreover, the presence of N-doped carbon network in the hybrid material serves as a robust protective cover and an electrical highway, buffering the substantial volume expansion of Sb nanoparticles and ensuring the fast electron transport for stable cycling operation.

  9. Identifying New Candidate Genes and Chemicals Related to Prostate Cancer Using a Hybrid Network and Shortest Path Approach

    Science.gov (United States)

    Yuan, Fei; Zhou, You; Wang, Meng; Yang, Jing; Wu, Kai; Lu, Changhong; Kong, Xiangyin; Cai, Yu-Dong

    2015-01-01

    Prostate cancer is a type of cancer that occurs in the male prostate, a gland in the male reproductive system. Because prostate cancer cells may spread to other parts of the body and can influence human reproduction, understanding the mechanisms underlying this disease is critical for designing effective treatments. The identification of as many genes and chemicals related to prostate cancer as possible will enhance our understanding of this disease. In this study, we proposed a computational method to identify new candidate genes and chemicals based on currently known genes and chemicals related to prostate cancer by applying a shortest path approach in a hybrid network. The hybrid network was constructed according to information concerning chemical-chemical interactions, chemical-protein interactions, and protein-protein interactions. Many of the obtained genes and chemicals are associated with prostate cancer. PMID:26504486

  10. Chemical bonding and magnetic properties of gadolinium (Gd) substituted cobalt ferrite

    Energy Technology Data Exchange (ETDEWEB)

    Puli, Venkata Sreenivas, E-mail: vspuli@utep.edu [Department of Mechanical Engineering, University of Texas, El Paso, TX 79968 (United States); Adireddy, Shiva [Department of Physics and Engineering Physics, Tulane University, New Orleans, LA 70118 (United States); Ramana, C.V. [Department of Mechanical Engineering, University of Texas, El Paso, TX 79968 (United States)

    2015-09-25

    Graphical abstract: Room temperature Raman spectra of CoFe{sub 2−x}Gd{sub x}O{sub 4} (CFGO, x = 0.0–0.3) compounds as a function of wavenumber (cm{sup −1}). - Highlights: • Gd substituted ferrites were synthesized under controlled concentration. • Gd ion induced lattice dynamical changes are significant. • Enhanced magnetization is observed upon Gd-incorporation in cobalt ferrite. • A correlation between lattice dynamics and magnetic properties is established. - Abstract: Polycrystalline gadolinium (Gd) substituted cobalt ferrites (CoFe{sub 2−x}Gd{sub x}O{sub 4}; x = 0–0.3, referred to CFGO) ceramics have been synthesized by solid state reaction method. Chemical bonding, crystal structure and magnetic properties of CFGO compounds have been evaluated as a function of Gd-content. X-ray diffraction (XRD) and Raman spectroscopic analyses confirmed the formation of inverse spinel cubic structure. However, a secondary ortho-ferrite phase (GdFeO{sub 3}) nucleates for higher values of Gd-content. A considerable increase in the saturation magnetization has been observed upon the initial substitution of Gd (x = 0.1). The saturation magnetization drastically decreases at higher Gd content (x ⩾ 0.3). No contribution from ortho-ferrite GdFeO{sub 3} phase is noted to the magnetic properties. The increase in the magnetic saturation magnetization is attributed to the higher magnetic moment of Gd{sup 3+} (4f{sup 7}) residing in octahedral sites is higher when compared to that of Fe{sup 3+} (3d{sup 5}) and as well due to the migration of Co{sup 2+} (3d{sup 7}) ions from the octahedral to the tetrahedral sites with a magnetic moment aligned anti-parallel to those of rare earth (RE{sup 3+}) ions in the spinel lattice. Increase in coercivity with increase in Gd{sup 3+} is content is attributed to magnetic anisotropy in the ceramics.

  11. What a difference a bond makes: the structural, chemical, and physical properties of methyl-terminated Si(111) surfaces.

    Science.gov (United States)

    Wong, Keith T; Lewis, Nathan S

    2014-10-21

    The chemical, electronic, and structural properties of surfaces are affected by the chemical termination of the surface. Two-step halogenation/alkylation of silicon provides a scalable, wet-chemical method for grafting molecules onto the silicon surface. Unlike other commonly studied wet-chemical methods of surface modification, such as self-assembly of monolayers on metals or hydrosilylation on silicon, the two-step method enables attachment of small alkyl chains, even methyl groups, to a silicon surface with high surface coverage and homogeneity. The methyl-terminated Si(111) surface, by comparison to hydrogen-terminated Si(111), offers a unique opportunity to study the effects of the first surface bond connecting the overlayer to the surface. This Account describes studies of methyl-terminated Si(111), which have shown that the H-Si(111) and CH3-Si(111) surfaces are structurally nearly identical, yet impart significantly different chemical and electronic properties to the resulting Si surface. The structure of methyl-terminated Si(111) formed by a two-step halogenation/methylation process has been studied by a variety of spectroscopic methods. A covalent Si-C bond is oriented normal to the surface, with the methyl group situated directly atop a surface Si atom. Multiple spectroscopic methods have shown that methyl groups achieve essentially complete coverage of the surface atoms while maintaining the atomically flat, terraced structure of the original H-Si(111) surface. Thus, the H-Si(111) and CH3-Si(111) surface share essentially identical structures aside from the replacement of a Si-H bond with a Si-C bond. Despite their structural similarity, hydrogen and methyl termination exhibit markedly different chemical passivation. Specifically, CH3-Si(111) exhibits significantly greater oxidation resistance than H-Si(111) in air and in aqueous electrolyte under photoanodic current flow. Both surfaces exhibit similar thermal stability in vacuum, and the Si-H and Si

  12. MgB2 superconducting whiskers synthesized by using the hybrid physical-chemical vapor deposition.

    Science.gov (United States)

    Wang, Yazhou; Zhuang, Chenggang; Gao, Jingyun; Shan, Xudong; Zhang, Jingmin; Liao, Zhimin; Xu, Hongjun; Yu, Dapeng; Feng, Qingrong

    2009-02-25

    In this work, MgB(2) whiskers were fabricated on a copper substrate by using the hybrid physical-chemical vapor deposition, which was one of the most effective ways to make high quality pure MgB(2) films, with the possible growth mechanism discussed. The whiskers are hexagonal and conelike and grow along the [0001] direction with a single-crystal structure. The onset transition temperature is approximately 39 K, which is among the best in the published nanostructure MgB(2) papers. Fabrication of nanoscale MgB(2) whiskers provides the fundamental understanding of the effect of dimensionality and size on superconductivity.

  13. Polynuclear Nickel Hexacyanoferrate/Graphitized Mesoporous Carbon Hybrid Chemically Modified Electrode for Selective Hydrazine Detection

    OpenAIRE

    Palani Barathi; Annamalai Senthil Kumar; Minnal Ranjan Babu Karthick

    2011-01-01

    A hybrid polynuclear nickel hexacyanoferrate (NiHCFe)/graphitized mesoporous carbon- (GMC-) modified glassy carbon electrode (GCE/NiHCFe@GMC) has been prepared by a sequential method using electrodeposited Ni on a GMC-modified glassy carbon electrode (GCE/Ni@GMC) as a template and [Fe(CN)6]3− as an in-situ chemical precipitant, without any additional interlinking agent. Physicochemical and electrochemical characterizations reveal the presence of NiHCFe units within the porous sites of the GM...

  14. Gravimetric chemical sensors based on silica-based mesoporous organic-inorganic hybrids.

    Science.gov (United States)

    Xu, Jiaqiang; Zheng, Qi; Zhu, Yongheng; Lou, Huihui; Xiang, Qun; Cheng, Zhixuan

    2014-09-01

    Silica-based mesoporous organic-inorganic hybrid material modified quartz crystal microbalance (QCM) sensors have been examined for their ability to achieve highly sensitive and selective detection. Mesoporous silica SBA-15 serves as an inorganic host with large specific surface area, facilitating gas adsorption, and thus leads to highly sensitive response; while the presence of organic functional groups contributes to the greatly improved specific sensing property. In this work, we summarize our efforts in the rational design and synthesis of novel sensing materials for the detection of hazardous substances, including simulant nerve agent, organic vapor, and heavy metal ion, and develop high-performance QCM-based chemical sensors.

  15. MgB2 ultrathin films fabricated by hybrid physical chemical vapor deposition and ion milling

    Science.gov (United States)

    Acharya, Narendra; Wolak, Matthäus A.; Tan, Teng; Lee, Namhoon; Lang, Andrew C.; Taheri, Mitra; Cunnane, Dan; Karasik, Boris. S.; Xi, X. X.

    2016-08-01

    In this letter, we report on the structural and transport measurements of ultrathin MgB2 films grown by hybrid physical-chemical vapor deposition followed by low incident angle Ar ion milling. The ultrathin films as thin as 1.8 nm, or 6 unit cells, exhibit excellent superconducting properties such as high critical temperature (Tc) and high critical current density (Jc). The results show the great potential of these ultrathin films for superconducting devices and present a possibility to explore superconductivity in MgB2 at the 2D limit.

  16. MgB2 ultrathin films fabricated by hybrid physical chemical vapor deposition and ion milling

    Directory of Open Access Journals (Sweden)

    Narendra Acharya

    2016-08-01

    Full Text Available In this letter, we report on the structural and transport measurements of ultrathin MgB2 films grown by hybrid physical-chemical vapor deposition followed by low incident angle Ar ion milling. The ultrathin films as thin as 1.8 nm, or 6 unit cells, exhibit excellent superconducting properties such as high critical temperature (Tc and high critical current density (Jc. The results show the great potential of these ultrathin films for superconducting devices and present a possibility to explore superconductivity in MgB2 at the 2D limit.

  17. Electrocatalytic Organic-Inorganic Hybrid Films and Their Applications in Chemical Sensors and Biosensors

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ In this report, we will present the organic-inorganic hybrid molecular films prepared in our group and their applications in chemical sensors and biosensors.Many types of multi-layered films have been prepared in an alternatively assembled organic-inorganic and layer-by-layer manner. We will focus on the alternatively organized organic surfactant and metal-complex films and their conversion into electrocatalytically active films. Especially, we will demonstrate the preparation of bifunctional films for the detection of two different but correlated species, such as nitric oxide and oxygen, in biomedia.

  18. Electrocatalytic Organic-Inorganic Hybrid Films and Their Applications in Chemical Sensors and Biosensors

    Institute of Scientific and Technical Information of China (English)

    LI; XiaoYuan

    2001-01-01

    In this report, we will present the organic-inorganic hybrid molecular films prepared in our group and their applications in chemical sensors and biosensors.Many types of multi-layered films have been prepared in an alternatively assembled organic-inorganic and layer-by-layer manner. We will focus on the alternatively organized organic surfactant and metal-complex films and their conversion into electrocatalytically active films. Especially, we will demonstrate the preparation of bifunctional films for the detection of two different but correlated species, such as nitric oxide and oxygen, in biomedia.  ……

  19. Synthesis of a New Porphyrin-fluorescein Hybrid and its Supramolecular Self-assembly with Amino-porphyrinatomanganese(Ⅲ)by Hydrogen-bonding

    Institute of Scientific and Technical Information of China (English)

    Jia Zheng LU; Jin Wang HUANG; Li Fen FAN; Jie LIU; Ke Zhuan XU; Xian Li CHEN; Liang Nian JI

    2005-01-01

    A new porphyrin-fluorescein hybrid 2 (Fl-PPTPP) has been synthesized and characterized by UV-Vis, IR, 1H-NMR, ESI-MS and elemental analysis. The supramolecular self-assembly of Fl-PPTPP with amino-porphyrinatomanganese(Ⅲ) [Mn(Ⅲ) (p-APTPP)C1] by hydrogen-bonding was studied using fluorescence spectroscopic titration and ESI-MS.

  20. CHEMICALLY BONDED CEMENTS FROM BOILER ASH AND SLUDGE WASTES. PHASE I REPORT AUGUST 1997 - JULY 1998

    Energy Technology Data Exchange (ETDEWEB)

    SUGAMA,T.; YAGER,K.A.

    2002-08-05

    In exploring methods to recycle boiler ash (BA) and waste water treatment sludge (WWTS), by-products generated from Keyspan's power plants, into commercially viable materials, we synthesized chemically bonded cements (CBC) offering the following three specific characteristics; (1) immobilization of hazardous heavy metals, such as Pb, Ni, and V, (2) rapid hardening and setting properties, and (3) development of high mechanical strength. The CBCs were prepared through an acid-base reaction between these by-products acting as the solid base reactants and the sodium polyphosphate solution as the cement-forming acid reactant, followed by a hydrating reaction. Furthermore, two additives, the calcium aluminate cements (CAC) and the calcium silicate cements (CSC) were incorporated into the CBC systems to improve their properties. Using a CBC formulation consisting of 53.8 wt% WWTS, 23.1 wt% CSC, and 23.1 wt% [40 wt% -(-NaPO{sub 3}-)-{sub n}]{sub 2} the Toxicity Characteristics Leaching Procedure (TCLP) tests showed that the concentrations of Pb, Ni, and V metals leached out from the specimens were minimal. This formulation originally contained {approx} 28800 mg/kg of Pb, {approx} 6300 mg/kg of Ni, and {approx} 11130 mg/kg of V; the amounts leaching into the acid extraction fluid were only 0.15 mg/L of Pb, 0.15 mg/L of Ni, and 4.63 mgiL of V. On the other hand, CBC specimens derived from a formulation consisting of 42 wt% BA, 18 wt% CAC and 40 wt% [40 wt% -(-NaPO{sub 3}-)-{sub n}] displayed an excellent compressive strength of 10.8 MPa at an early curing age of 2 hours after mixing at room temperature. The reason for its rapid hardening was due to a high exothermic energy evolved by the acid-base reaction. Furthermore, when these specimens were immersed for 28 days in water at 25 C, and exposed for 20 hours to steam at 80 C, a very high compressive strength of 3.32 MPa developed. Two physico-chemical factors played an important role in improving the mechanical strength

  1. Proton NMR Chemical Shift Behavior of Hydrogen-Bonded Amide Proton of Glycine-Containing Peptides and Polypeptides as Studied by ab initio MO Calculation

    Directory of Open Access Journals (Sweden)

    I. Ando

    2002-08-01

    Full Text Available Abstract: NMR chemical shifts of the amide proton of a supermolecule, an Nmethylacetamide hydrogen-bonded with a formamide, were calculated as functions of hydrogen-bond length RN…O and hydrogen-bond angles by FPT-GIAO method within the framework of HF/STO 6-31++G(d,p ab initio MO method. The calculations explained reasonably the experimental data reported previously that the isotropic proton chemical shifts move downfield with a decrease in RN…O. Further, the behavior of proton chemical shift tensor components depending on the hydrogen-bond length and hydrogen-bond angle was discussed.

  2. Comparison of shear bond strength of resin reinforced chemical cure glass ionomer, conventional chemical cure glass ionomer and chemical cure composite resin in direct bonding systems: an in vitro study.

    Science.gov (United States)

    Rao, Kolasani Srinivasa; Reddy, T Praveen Kumar; Yugandhar, Garlapati; Kumar, B Sunil; Reddy, S N Chandrasekhar; Babu, Devatha Ashok

    2013-01-01

    The acid pretreatment and use of composite resins as the bonding medium has disadvantages like scratching and loss of surface enamel, decalcification, etc. To overcome disadvantages of composite resins, glass ionomers and its modifications are being used for bonding. The study was conducted to evaluate the efficiency of resin reinforced glass ionomer as a direct bonding system with conventional glass ionomer cement and composite resin. The study showed that shear bond strength of composite resin has the higher value than both resin reinforced glass ionomer and conventional glass ionomer cement in both 1 and 24 hours duration and it increased from 1 to 24 hours in all groups. The shear bond strength of resin reinforced glass ionomer cement was higher than the conventional glass ionomer cement in both 1 and 24 hours duration. Conditioning with polyacrylic acid improved the bond strength of resin reinforced glass ionomer cement significantly but not statistically significant in the case of conventional glass ionomer cement.

  3. Physical and chemical characterization of masa and tortillas from parental lines, crosses, and one hybrid

    Science.gov (United States)

    Valderrama-Bravo, C.; Domínguez-Pacheco, A.; Hernández-Aguilar, C.; Zepeda-Bautista, R.; del Real-López, A.; Pahua-Ramos, M. E.; Arellano-Vázquez, J. L.; Moreno-Martínez, E.

    2017-01-01

    In maize plant breeding aimed at producing a hybrid, it is necessary to characterize the parents and hybrids by their agronomic aspects and grain quality so that the processing industry may offer consumers a quality product and also improve its efficiency. This study evaluated the viscoelastic parameters of masa and the chemical and texture properties of tortillas obtained from parent lines (M-54, M55, and CML-242), two single crosses (M54xM55 and M55xM54), and one hybrid (H-70). The morphology of the maize grains and tortillas was analyzed using scanning electron microscopy. The firmness of masa obtained from CML-242 and H-70 maize was higher than that from the other maize genotypes. M-54 tortillas showed the lowest crude fiber content. Otherwise, tortillas obtained from the M55xM54 hard grain had the lowest fat content and extensibility, while H-70 tortillas showed an intermediate breaking point and extensibility. M-54 and M54xM55 tortillas were softer due to their more swollen starch granules. In contrast, rigid tortillas were obtained from CML-242 and H-70. Grain hardness causes different morphology in starch and tortilla of maize genotypes. However, grain hardness did not influence the characteristics of texture in tortillas.

  4. A periodic energy decomposition analysis method for the investigation of chemical bonding in extended systems

    Energy Technology Data Exchange (ETDEWEB)

    Raupach, Marc; Tonner, Ralf, E-mail: tonner@chemie.uni-marburg.de [Fachbereich Chemie, Philipps-Universität Marburg, Hans-Meerwein-Straße, 35032 Marburg (Germany)

    2015-05-21

    The development and first applications of a new periodic energy decomposition analysis (pEDA) scheme for extended systems based on the Kohn-Sham approach to density functional theory are described. The pEDA decomposes the bonding energy between two fragments (e.g., the adsorption energy of a molecule on a surface) into several well-defined terms: preparation, electrostatic, Pauli repulsion, and orbital relaxation energies. This is complemented by consideration of dispersion interactions via a pairwise scheme. One major extension toward a previous implementation [Philipsen and Baerends, J. Phys. Chem. B 110, 12470 (2006)] lies in the separate discussion of electrostatic and Pauli and the addition of a dispersion term. The pEDA presented here for an implementation based on atomic orbitals can handle restricted and unrestricted fragments for 0D to 3D systems considering periodic boundary conditions with and without the determination of fragment occupations. For the latter case, reciprocal space sampling is enabled. The new method gives comparable results to established schemes for molecular systems and shows good convergence with respect to the basis set (TZ2P), the integration accuracy, and k-space sampling. Four typical bonding scenarios for surface-adsorbate complexes were chosen to highlight the performance of the method representing insulating (CO on MgO(001)), metallic (H{sub 2} on M(001), M = Pd, Cu), and semiconducting (CO and C{sub 2}H{sub 2} on Si(001)) substrates. These examples cover diverse substrates as well as bonding scenarios ranging from weakly interacting to covalent (shared electron and donor acceptor) bonding. The results presented lend confidence that the pEDA will be a powerful tool for the analysis of surface-adsorbate bonding in the future, enabling the transfer of concepts like ionic and covalent bonding, donor-acceptor interaction, steric repulsion, and others to extended systems.

  5. Critical surface energy of composite cement containing MDP (10-methacryloyloxydecyl dihydrogen phosphate) and chemical bonding to hydroxyapatite.

    Science.gov (United States)

    Dabsie, Firas; Grégoire, Geneviève; Sharrock, Patrick

    2012-01-01

    Self-adhesive composite cements are increasingly used for cementing inlays/onlays, intraradicular posts, crowns and laminate veneers. Wider clinical acceptance is driven by simpler and faster handling procedures, much like observed for self-etching adhesives. 10-Methacryloyloxydecyl dihydrogen phosphate (MDP) is a bi-functional monomer incorporated as the reactive ingredient in a contemporary self-adhesive cement. We have examined the surface free energy parameters of this cement and studied the mode of action of the cement on dentine substrate by contact angle measurements to determine the critical surface energy of the cement. Retention of the infrared absorption bands characteristic of the acrylate moieties on the surface of hydroxyapatite particles suggests that MDP contributes to the overall bonding to dentine by forming ionic chemical bonds with surface calcium ions in dentine crystalites.

  6. Identification of the Chemical Bonding Prompting Adhesion of a-C:H Thin Films on Ferrous Alloy Intermediated by a SiCx:H Buffer Layer.

    Science.gov (United States)

    Cemin, F; Bim, L T; Leidens, L M; Morales, M; Baumvol, I J R; Alvarez, F; Figueroa, C A

    2015-07-29

    Amorphous carbon (a-C) and several related materials (DLCs) may have ultralow friction coefficients that can be used for saving-energy applications. However, poor chemical bonding of a-C/DLC films on metallic alloys is expected, due to the stability of carbon-carbon bonds. Silicon-based intermediate layers are employed to enhance the adherence of a-C:H films on ferrous alloys, although the role of such buffer layers is not yet fully understood in chemical terms. The chemical bonding of a-C:H thin films on ferrous alloy intermediated by a nanometric SiCx:H buffer layer was analyzed by X-ray photoelectron spectroscopy (XPS). The chemical profile was inspected by glow discharge optical emission spectroscopy (GDOES), and the chemical structure was evaluated by Raman and Fourier transform infrared spectroscopy techniques. The nature of adhesion is discussed by analyzing the chemical bonding at the interfaces of the a-C:H/SiCx:H/ferrous alloy sandwich structure. The adhesion phenomenon is ascribed to specifically chemical bonding character at the buffer layer. Whereas carbon-carbon (C-C) and carbon-silicon (C-Si) bonds are formed at the outermost interface, the innermost interface is constituted mainly by silicon-iron (Si-Fe) bonds. The oxygen presence degrades the adhesion up to totally delaminate the a-C:H thin films. The SiCx:H deposition temperature determines the type of chemical bonding and the amount of oxygen contained in the buffer layer.

  7. Dependence of SERS enhancement on the chemical composition and structure of Ag/Au hybrid nanoparticles.

    Science.gov (United States)

    Chaffin, Elise; O'Connor, Ryan T; Barr, James; Huang, Xiaohua; Wang, Yongmei

    2016-08-01

    Noble metal nanoparticles (NPs) such as silver (Ag) and gold (Au) have unique plasmonic properties that give rise to surface enhanced Raman scattering (SERS). Generally, Ag NPs have much stronger plasmonic properties and, hence, provide stronger SERS signals than Au NPs. However, Ag NPs lack the chemical stability and biocompatibility of comparable Au NPs and typically exhibit the most intense plasmonic resonance at wavelengths much shorter than the optimal spectral region for many biomedical applications. To overcome these issues, various experimental efforts have been devoted to the synthesis of Ag/Au hybrid NPs for the purpose of SERS detections. However, a complete understanding on how the SERS enhancement depends on the chemical composition and structure of these nanoparticles has not been achieved. In this study, Mie theory and the discrete dipole approximation have been used to calculate the plasmonic spectra and near-field electromagnetic enhancements of Ag/Au hybrid NPs. In particular, we discuss how the electromagnetic enhancement depends on the mole fraction of Au in Ag/Au alloy NPs and how one may use extinction spectra to distinguish between Ag/Au alloyed NPs and Ag-Au core-shell NPs. We also show that for incident laser wavelengths between ∼410 nm and 520 nm, Ag/Au alloyed NPs provide better electromagnetic enhancement than pure Ag, pure Au, or Ag-Au core-shell structured NPs. Finally, we show that silica-core Ag/Au alloy shelled NPs provide even better performance than pure Ag/Au alloy or pure solid Ag and pure solid Au NPs. The theoretical results presented will be beneficial to the experimental efforts in optimizing the design of Ag/Au hybrid NPs for SERS-based detection methods.

  8. CHEMICALLY BONDED CEMENTS FROM BOILER ASH AND SLUDGE WASTES. PHASE II REPORT, SEPT.1998-JULY 1999.

    Energy Technology Data Exchange (ETDEWEB)

    SUGAMA,T.YAGER,K.A.BLANKENHORN,D.(KEYSPAN R AND D INITIATIVE)

    1999-08-01

    Based upon the previous Phase I research program aimed at looking for ways of recycling the KeySpan-generated wastes, such as waste water treatment sludge (WWTS) and bottom ash (BA), into the potentially useful cementitious materials called chemically bonded cement (CBC) materials, the emphasis of this Phase II program done at Brookhaven National Laboratory, in a period of September 1998 through July 1999, was directed towards the two major subjects: One was to assess the technical feasibility of WWTS-based CBC material for use as Pb-exchange adsorbent (PEA) which remediates Pb-contaminated soils in the field; and the other was related to the establishment of the optimum-packaging storage system of dry BA-based CBC components that make it a promising matrix material for the steam-cured concrete products containing sand and coarse aggregate. To achieve the goal of the first subject, a small-scale field demonstration test was carried out. Using the PEA material consisting of 30 wt% WWTS, 13 wt% Type I cement and 57 wt% water, the PES slurry was prepared using a rotary shear concrete mixer, and then poured on the Pb-contaminated soil. The PEA-to-soil ratio by weight was a factor of 2.0. The placed PEA slurry was blended with soil using hand mixing tools such as claws and shovels. The wettability of soils with the PEA was very good, thereby facilitating the soil-PEA mix procedures. A very promising result was obtained from this field test; in fact, the mount of Pb leached out from the 25-day-aged PEA-treated soil specimen was only 0.74 mg/l, meeting the requirement for EPA safe regulation of < 5 mg/l. In contrast, a large amount (26.4 mg/l) of Pb was detected from the untreated soil of the same age. Thus, this finding demonstrated that the WWTS-based CBC has a potential for use as PEA material. Regarding the second subject, the dry-packed storage system consisting of 68.7 wt% BA, 13.0 wt% calcium aluminate cement (CAC), 13.0 wt% Type I portland cement and 5.3 wt

  9. The electron density distribution in the hydrogen bond. A quantum chemical and crystallographic study

    NARCIS (Netherlands)

    Feil, Dirk

    1990-01-01

    With the help of Hartree—Fock—Slater calculations in which very large basis sets are employed, the polarisation of the water molecule by an electric field is explored. The various features in the electron density distribution are encountered again in the long hydrogen bond in the water dimer, showin

  10. Physico-Chemical Factors Affecting Hydrothermal Resistance and Bonding of Polymeric Composites to Steel Surfaces

    Science.gov (United States)

    1985-11-01

    7 , I 71iil 7 7 771111011111111111171111 Type A consists of a strong ionic interaction associated with charge transfer bonding mechanisms which...the ionic interaction regions and the density of entangleicnt macromol- ecules at interfaces are not evident from the limited data. Nevertheless

  11. Enzymatically cross-linked tilapia gelatin hydrogels: physical, chemical, and hybrid networks.

    Science.gov (United States)

    Bode, Franziska; da Silva, Marcelo Alves; Drake, Alex F; Ross-Murphy, Simon B; Dreiss, Cécile A

    2011-10-10

    This Article investigates different types of networks formed from tilapia fish gelatin (10% w/w) in the presence and absence of the enzymatic cross-linker microbial transglutaminase. The influence of the temperature protocol and cross-linker concentration (0-55 U mTGase/g gelatin) was examined in physical, chemical, and hybrid gels, where physical gels arise from the formation of triple helices that act as junction points when the gels are cooled below the gelation point. A combination of rheology and optical rotation was used to study the evolution of the storage modulus (G') over time and the number of triple helices formed for each type of gel. We attempted to separate the final storage modulus of the gels into its chemical and physical contributions to examine the existence or otherwise of synergism between the two types of networks. Our experiments show that the gel characteristics vary widely with the thermal protocol. The final storage modulus in chemical gels increased with enzyme concentration, possibly due to the preferential formation of closed loops at low cross-linker amount. In chemical-physical gels, where the physical network (helices) was formed consecutively to the covalent one, we found that below a critical enzyme concentration the more extensive the chemical network is (as measured by G'), the weaker the final gel is. The storage modulus attributed to the physical network decreased exponentially as a function of G' from the chemical network, but both networks were found to be purely additive. Helices were not thermally stabilized. The simultaneous formation of physical and chemical networks (physical-co-chemical) resulted in G' values higher than the individual networks formed under the same conditions. Two regimes were distinguished: at low enzyme concentration (10-20 U mTGase/g gelatin), the networks were formed in series, but the storage modulus from the chemical network was higher in the presence of helices (compared to pure chemical gels

  12. Enzyme-free and isothermal detection of microRNA based on click-chemical ligation-assisted hybridization coupled with hybridization chain reaction signal amplification.

    Science.gov (United States)

    Oishi, Motoi

    2015-05-01

    An enzyme-free and isothermal microRNA (miRNA) detection method has been developed based on click-chemical ligation-assisted hybridization coupled with hybridization chain reaction (HCR) on magnetic beads (MBs). The click-chemical ligation between an azide-modified probe DNA and a dibenzocyclooctyne-modified probe DNA occurred through the hybridization of target miRNA (miR-141). HCR on MBs was performed by the addition of DNA hairpin monomers (H1 and H2). After magnetic separation and denaturation/rehybridization of HCR products ([H1/H2] n ), the resulting HCR products were analyzed by the fluorescence emitted from an intercalative dye, allowing amplification of the fluorescent signal. The proposed assay had a limit of detection of 0.55 fmol, which was 230-fold more sensitive than that of the HCR on the MBs coupled with a conventional sandwich hybridization assay (without click-chemical ligation) (limit of detection 127 fmol). Additionally, the proposed assay could discriminate between miR-141 and other miR-200 family members. In contrast to quantitative reverse transcription polymerase chain reaction techniques using enzymes and thermal cycling, this is an enzyme-free assay that can be conducted under isothermal conditions and can specifically detect miR-141 in fetal bovine serum.

  13. Effect of Particles Content on Microstructure, Mechanical Properties, and Electrochemical Behavior of Aluminum-Based Hybrid Composite Processed by Accumulative Roll Bonding Process

    Science.gov (United States)

    Fattah-Alhosseini, Arash; Naseri, Majid; Alemi, Mohamad Hesam

    2017-03-01

    Effect of B4C/SiC particles content on the microstructure, deformation, and electrochemical behavior of aluminum-based hybrid composite processed by accumulative roll bonding (ARB) was investigated. The ARB process was used to fabricate hybrid composites which consist of 1 and 2.5 wt pct of B4C/SiC mixed particles as reinforcement. The microstructure of the fabricated hybrid composites after the ninth cycle of the ARB process exhibited an excellent distribution of B4C/SiC particles in the aluminum matrix where no porosity was observed. In addition, with increasing the particle content in the aluminum matrix, the hybrid composites demonstrated higher tensile strength and lower elongation. The ARB-processed hybrid composites exhibited 3.12 and 3.37 times higher hardness for samples having 1 and 2.5 wt pct B4C/SiC, respectively, than that of the annealed aluminum. Electrochemical impedance spectroscopy and potentiodynamic polarization curves revealed that the corrosion resistance dropped drastically by increasing the number of ARB cycles from 3 to 5. However, by further ARB processing, the corrosion resistance gradually increased, and finally, after 9 cycles reached to the values higher than those of 3-cycle ARB-processed samples.

  14. Effect of Particles Content on Microstructure, Mechanical Properties, and Electrochemical Behavior of Aluminum-Based Hybrid Composite Processed by Accumulative Roll Bonding Process

    Science.gov (United States)

    Fattah-Alhosseini, Arash; Naseri, Majid; Alemi, Mohamad Hesam

    2017-01-01

    Effect of B4C/SiC particles content on the microstructure, deformation, and electrochemical behavior of aluminum-based hybrid composite processed by accumulative roll bonding (ARB) was investigated. The ARB process was used to fabricate hybrid composites which consist of 1 and 2.5 wt pct of B4C/SiC mixed particles as reinforcement. The microstructure of the fabricated hybrid composites after the ninth cycle of the ARB process exhibited an excellent distribution of B4C/SiC particles in the aluminum matrix where no porosity was observed. In addition, with increasing the particle content in the aluminum matrix, the hybrid composites demonstrated higher tensile strength and lower elongation. The ARB-processed hybrid composites exhibited 3.12 and 3.37 times higher hardness for samples having 1 and 2.5 wt pct B4C/SiC, respectively, than that of the annealed aluminum. Electrochemical impedance spectroscopy and potentiodynamic polarization curves revealed that the corrosion resistance dropped drastically by increasing the number of ARB cycles from 3 to 5. However, by further ARB processing, the corrosion resistance gradually increased, and finally, after 9 cycles reached to the values higher than those of 3-cycle ARB-processed samples.

  15. A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB

    Directory of Open Access Journals (Sweden)

    Mohsen Reihanian

    2016-06-01

    Full Text Available In this study, the Al/Al2O3-SiC hybrid composite was produced by accumulative roll bonding (ARB. In the first and the second cycles, the particles were uniformly poured between the Al strips during each ARB cycle. In the subsequent cycles, ARB was repeated up to six cycles without adding the particles between the layers. After the total eight cycles, the particles were distributed uniformly without agglomeration in the Al matrix. The corrosion behavior of the hybrid composite was investigated and compared with that of the annealed and ARB processed Al. The corrosion tests were conducted by the potentiodynamic and electrochemical impedance spectroscopy tests in 3.5 wt-% NaCl solution. The anodic potential of the pure Al processed by ARB was more positive than that of the annealed Al while its corrosion current density was higher. The corrosion potential of the hybrid composite was somewhere between the annealed Al and ARB processed Al. The hybrid composite exhibited the lowest current density and the highest charge transfer resistance. The increased corrosion resistance of the hybrid composite was attributed to the inert character of the Al2O3 and SiC particles because these particles could decrease the active sites of the material surface and impeding the corrosive attacks.

  16. Chemical synthesis of La1 isolated from the venom of the scorpion Liocheles australasiae and determination of its disulfide bonding pattern.

    Science.gov (United States)

    Nagao, Junya; Miyashita, Masahiro; Nakagawa, Yoshiaki; Miyagawa, Hisashi

    2015-08-01

    La1 is a 73-residue cysteine-rich peptide isolated from the scorpion Liocheles australasiae venom. Although La1 is the most abundant peptide in the venom, its biological function remains unknown. Here, we describe a method for efficient chemical synthesis of La1 using the native chemical ligation (NCL) strategy, in which three peptide components of less than 40 residues were sequentially ligated. The peptide thioester necessary for NCL was synthesized using an aromatic N-acylurea approach with Fmoc-SPPS. After completion of sequential NCL, disulfide bond formation was carried out using a dialysis method, in which the linear peptide dissolved in an acidic solution was dialyzed against a slightly alkaline buffer to obtain correctly folded La1. Next, we determined the disulfide bonding pattern of La1. Enzymatic and chemical digests of La1 without reduction of disulfide bonds were analyzed by liquid chromatography/mass spectrometry (LC/MS), which revealed two of four disulfide bond linkages. The remaining two linkages were assigned based on MS/MS analysis of a peptide fragment containing two disulfide bonds. Consequently, the disulfide bonding pattern of La1 was found to be similar to that of a von Willebrand factor type C (VWC) domain. To our knowledge, this is the first report of the experimental determination of the disulfide bonding pattern of peptides having a single VWC domain as well as their chemical synthesis. La1 synthesized in this study will be useful for investigation of its biological role in the venom.

  17. Improvement in reinforcing bond strength in reinforced concrete with self-repairing chemical adhesives

    Science.gov (United States)

    Dry, Carolyn M.

    1997-05-01

    Self-healing concretes have embedded adhesives which are released from hollow fibers inside the concrete when and where cracking of the matrix and the fibers occurs. It was found that the adhesive improves the strength of the cracked portions of the concrete and increases its ability to deflect under load. Structural materials subjected to dynamic events such as earthquakes and impacts can have improved response by the noise of adhesive type which can impart improved damping, lateral stiffness, or deflection. Testing also assessed the improvement of the bond strength in structures. In laboratory tests the internal adhesive repair system improved the bond between the reinforcing steel and the concrete to prevent pullout failure or debonding at the interface.

  18. First-Principles Calculations on Electronic, Chemical Bonding and Optical Properties of Cubic Hf3N4

    Institute of Scientific and Technical Information of China (English)

    FENG Li-Ping; WANG Zhi-Qiang; LIU Zheng-Tang

    2013-01-01

    Electronic,chemical bonding and optical properties of cubic Hf3N4(c-Hf3N4) are calculated using the firstprinciples based on the density functional theory (DFT).The optimized lattice parameter is in good agreement with the available experimental and calculational values.Band structure shows that c-Hf3N4 has direct band gap.Densities of states (DOS) and charge densities indicate that the bonding between Hf and N is ionic.The optical properties including complex dielectric function,refractive index,extinction coefficient,absorption coefficient,and reflectivity are predicted.From the theory of crystal-field and molecudar-orbital bonding,the optical transitions of c-Hf3N4 affected by the electronic structure and molecular orbital are studied.It is found that the absorptive transitions of c-Hf3N4 compound are predominantly composed of the transitions from N T22p valence bands to HfT2 (dxy,dxz,dyz) conduction bands.

  19. Evaluation of molecular assembly, spectroscopic interpretation, intra-/inter molecular hydrogen bonding and chemical reactivity of two pyrrole precursors

    Science.gov (United States)

    Rawat, Poonam; Singh, R. N.

    2014-10-01

    This paper describes the evaluation of conformational, spectroscopic, hydrogen bonding and chemical reactivity of pyrrole precursor: ethyl 3,5 dimethyl-1H-pyrrole-2-carboxylate (EDPC) and ethyl 3,4-dimethyl-4-acetyl-1H-pyrrole-2-carboxylate (EDAPC) for the convenient characterization, synthetic usefulness and comparative evaluations. All experimental spectral values of 1H NMR, UV-Vis and FT-IR spectra coincide well with calculated values by DFT. The orbital interactions in EDPC and EDAPC are found to lengthen their Nsbnd H and Cdbnd O bonds and lowers their vibrational frequencies (red shift) resulting to dimer formation. The QTAIM and NBO analyses provide the strength of interactions and charge transfer in the hydrogen bonding unit and stability of dimers. The binding energy of EDPC and EDPAC dimer are found to be 9.92, 10.22 kcal/mol, respectively. In EDPAC and EDPC dimer, hyperconjugative interactions between monomer units is due to n1(O) → σ*(Nsbnd H) that stabilize the molecule up to 9.7 and 9.3 kcal/mol, respectively. On evaluation of molecular electrostatic potential (MEP) and electronic descriptors for EDPC it has been found that it is a good precursor for synthesis of formyl and acetyl derivatives whereas EDAPC has been found to be a good precursor for synthesis of schiff base, hydrazones, hydrazide-hydrazones and chalcones.

  20. Evaluation and Optimization Study on a Hybrid EOR Technique Named as Chemical-Alternating-Foam Floods

    Directory of Open Access Journals (Sweden)

    Xu Xingguang

    2017-01-01

    Full Text Available This work presents a novel Enhanced Oil Recovery (EOR method called Chemical-Alternating-Foam (CAF floods in order to overcome the drawbacks of the conventional foam flooding such as insufficient amount of in-situ foams, severe foam collapse and surfactant retention. The first part of this research focused on the comparison of conventional foam floods and CAF floods both of which had the same amount of gas and chemicals. It showed that: (1 CAF floods possessed the much greater Residual Resistance Factor (RRF at elevated temperature; (2 the accumulative oil recovery of the CAF floods was 10%-15% higher than that of the conventional foam flooding. After 1.8 Pore Volume (PV injection, the oil recovery reached the plateau for both methods; (3 CAF floods yielded the most amount of incremental oil at the 98% water cut (water content in the effluent, while the continuous foam floods achieved the best performance at 60% water cut. The second part of this work determined the optimal foam quality (gas/liquid ratio or the volume percent gas within foam, chemical/foam slug size ratio, cycle number and injection sequence for the CAF floods. It was found that the CAF was endowed with the peak performance if the foam quality, chemical/foam slug size ratio, cycle number was fixed at 80%, 1:1 and 3 respectively with the chemical slug being introduced ahead of the foam slug. Through systematic and thorough research, the proposed hybrid process has been approved to be a viable and effective method significantly strengthening the conventional foam flooding.

  1. Analytic projection from plane-wave and PAW wavefunctions and application to chemical-bonding analysis in solids.

    Science.gov (United States)

    Maintz, Stefan; Deringer, Volker L; Tchougréeff, Andrei L; Dronskowski, Richard

    2013-11-05

    Quantum-chemical computations of solids benefit enormously from numerically efficient plane-wave (PW) basis sets, and together with the projector augmented-wave (PAW) method, the latter have risen to one of the predominant standards in computational solid-state sciences. Despite their advantages, plane waves lack local information, which makes the interpretation of local densities-of-states (DOS) difficult and precludes the direct use of atom-resolved chemical bonding indicators such as the crystal orbital overlap population (COOP) and the crystal orbital Hamilton population (COHP) techniques. Recently, a number of methods have been proposed to overcome this fundamental issue, built around the concept of basis-set projection onto a local auxiliary basis. In this work, we propose a novel computational technique toward this goal by transferring the PW/PAW wavefunctions to a properly chosen local basis using analytically derived expressions. In particular, we describe a general approach to project both PW and PAW eigenstates onto given custom orbitals, which we then exemplify at the hand of contracted multiple-ζ Slater-type orbitals. The validity of the method presented here is illustrated by applications to chemical textbook examples-diamond, gallium arsenide, the transition-metal titanium-as well as nanoscale allotropes of carbon: a nanotube and the C60 fullerene. Remarkably, the analytical approach not only recovers the total and projected electronic DOS with a high degree of confidence, but it also yields a realistic chemical-bonding picture in the framework of the projected COHP method.

  2. ChemSpot: a hybrid system for chemical named entity recognition.

    Science.gov (United States)

    Rocktäschel, Tim; Weidlich, Michael; Leser, Ulf

    2012-06-15

    The accurate identification of chemicals in text is important for many applications, including computer-assisted reconstruction of metabolic networks or retrieval of information about substances in drug development. But due to the diversity of naming conventions and traditions for such molecules, this task is highly complex and should be supported by computational tools. We present ChemSpot, a named entity recognition (NER) tool for identifying mentions of chemicals in natural language texts, including trivial names, drugs, abbreviations, molecular formulas and International Union of Pure and Applied Chemistry entities. Since the different classes of relevant entities have rather different naming characteristics, ChemSpot uses a hybrid approach combining a Conditional Random Field with a dictionary. It achieves an F(1) measure of 68.1% on the SCAI corpus, outperforming the only other freely available chemical NER tool, OSCAR4, by 10.8 percentage points. ChemSpot is freely available at: http://www.informatik.hu-berlin.de/wbi/resources.

  3. Corn silage management I: effects of hybrid, maturity, and mechanical processing on chemical and physical characteristics.

    Science.gov (United States)

    Johnson, L M; Harrison, J H; Davidson, D; Robutti, J L; Swift, M; Mahanna, W C; Shinners, K

    2002-04-01

    Two experiments were conducted to evaluate the effects of hybrid, maturity, and mechanical processing of whole plant corn on chemical and physical characteristics, particle size, pack density, and dry matter recovery. In the first experiment, hybrid 3845 whole plant corn was harvested at hard dough, one-third milkline, and two-thirds milkline with a theoretical length-of-cut of 6.4 mm. In the second experiment, hybrids 3845 and Quanta were harvested at one-third milkline, two-thirds milkline, and blackline stages of maturity with a theoretical length-of-cut of 12.7 mm. At each stage of maturity, corn was harvested with and without mechanical processing by using a John Deere 5830 harvester with an onboard kernel processor. The percentage of intact corn kernels present in unprocessed corn silage explained 62% of variation in total tract starch digestibility. As the amount of intact kernels increased, total tract starch digestibility decreased. Post-ensiled vitreousness of corn kernels within the corn silage explained 31 and 48% of the variation of total tract starch digestibility for processed and unprocessed treatments, respectively. For a given amount of vitreous starch in corn kernels, total tract starch digestibility was lower for cows fed unprocessed corn silage compared with processed corn silage. This suggests that processing corn silage disrupts the dense protein matrix within the corn kernel where starch is embedded, therefore making the starch more available for digestion. Particle size of corn silage and orts that contained corn silage was reduced when it was processed. Wet pack density was greater for processed compared with unprocessed corn silage.

  4. Effect of applied dc bias voltage on composition, chemical bonding and mechanical properties of carbon nitride films prepared by PECVD

    Institute of Scientific and Technical Information of China (English)

    LI Hong-xuan; XU Tao; HAO Jun-ying; CHEN Jian-min; ZHOU Hui-di; XUE Qun-ji; LIU Hui-wen

    2004-01-01

    Carbon nitride films were deposited on Si (100) substrates using plasma-enhanced chemical vapor deposition (PECVD) technique from CH4 and N2 at different applied dc bias voltage. The microstructure, composition and chemical bonding of the resulting films were characterized by Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The mechanical properties such as hardness and elastic modulus of the films were evaluated using nano-indentation. As the results, the Raman spectra, showing the G and D bands, indicate the amorphous structure of the films. XPS and FTIR measurements demonstrate the existence of various carbon-nitride bonds in the films and the hydrogenation of carbon nitride phase. The composition ratio of N to C, the nano-hardness and the elastic modulus of the carbon nitride films increase with increasing dc bias voltage and reach the maximums at a dc bias voltage of 300 V, then they decrease with further increase of the dc bias voltage. Moreover, the XRD analyses indicate that the carbon nitride film contains some polycrystalline C3N4 phase embedded in the amorphous matrix at optimized deposition condition of dc bias voltage of 300 V.

  5. Structure-property relationships in cubic cuprous iodide: A novel view on stability, chemical bonding, and electronic properties

    Science.gov (United States)

    Pishtshev, A.; Karazhanov, S. Zh.

    2017-02-01

    Based on the combination of density functional theory and theory-group methods, we performed systematic modeling of γ-CuI structural design at the atomistic level. Being started from the metallic copper lattice, we treated a crystal assembly as a stepwise iodination process characterized in terms of a sequence of intermediate lattice geometries. These geometries were selected and validated via screening of possible structural transformations. The genesis of chemical bonding was studied for three structural transformations by analyzing the relevant changes in the topology of valence electron densities. We determined structural trends driven by metal-ligand coupling. This allowed us to suggest the improved scenario of chemical bonding in γ-CuI. In particular, the unconventional effect of spatial separation of metallic and covalent interactions was found to be very important with respect to the preferred arrangements of valence electrons in the iodination process. We rigorously showed that useful electronic and optical properties of γ-CuI originate from the combination of two separated bonding patterns—strong covalency established in I-Cu tetrahedral connections and noncovalent interactions of copper cores is caused by the 3d10 closed-shell electron configurations. The other finding of ours is that the self-consistency of the GW calculations is crucial for correctly determining the dynamic electronic correlations in γ-CuI. Detail reinvestigation of the quasi-particle energy structure by means of the self-consistent GW approach allowed us to explain how p-type electrical conductivity can be engineered in the material.

  6. Structure-property relationships in cubic cuprous iodide: A novel view on stability, chemical bonding, and electronic properties.

    Science.gov (United States)

    Pishtshev, A; Karazhanov, S Zh

    2017-02-14

    Based on the combination of density functional theory and theory-group methods, we performed systematic modeling of γ-CuI structural design at the atomistic level. Being started from the metallic copper lattice, we treated a crystal assembly as a stepwise iodination process characterized in terms of a sequence of intermediate lattice geometries. These geometries were selected and validated via screening of possible structural transformations. The genesis of chemical bonding was studied for three structural transformations by analyzing the relevant changes in the topology of valence electron densities. We determined structural trends driven by metal-ligand coupling. This allowed us to suggest the improved scenario of chemical bonding in γ-CuI. In particular, the unconventional effect of spatial separation of metallic and covalent interactions was found to be very important with respect to the preferred arrangements of valence electrons in the iodination process. We rigorously showed that useful electronic and optical properties of γ-CuI originate from the combination of two separated bonding patterns-strong covalency established in I-Cu tetrahedral connections and noncovalent interactions of copper cores is caused by the 3d(10) closed-shell electron configurations. The other finding of ours is that the self-consistency of the GW calculations is crucial for correctly determining the dynamic electronic correlations in γ-CuI. Detail reinvestigation of the quasi-particle energy structure by means of the self-consistent GW approach allowed us to explain how p-type electrical conductivity can be engineered in the material.

  7. Design and implementation of a novel portable atomic layer deposition/chemical vapor deposition hybrid reactor.

    Science.gov (United States)

    Selvaraj, Sathees Kannan; Jursich, Gregory; Takoudis, Christos G

    2013-09-01

    We report the development of a novel portable atomic layer deposition chemical vapor deposition (ALD/CVD) hybrid reactor setup. Unique feature of this reactor is the use of ALD/CVD mode in a single portable deposition system to fabricate multi-layer thin films over a broad range from "bulk-like" multi-micrometer to nanometer atomic dimensions. The precursor delivery system and control-architecture are designed so that continuous reactant flows for CVD and cyclic pulsating flows for ALD mode are facilitated. A custom-written LabVIEW program controls the valve sequencing to allow synthesis of different kinds of film structures under either ALD or CVD mode or both. The entire reactor setup weighs less than 40 lb and has a relatively small footprint of 8 × 9 in., making it compact and easy for transportation. The reactor is tested in the ALD mode with titanium oxide (TiO2) ALD using tetrakis(diethylamino)titanium and water vapor. The resulting growth rate of 0.04 nm/cycle and purity of the films are in good agreement with literature values. The ALD/CVD hybrid mode is demonstrated with ALD of TiO2 and CVD of tin oxide (SnOx). Transmission electron microscopy images of the resulting films confirm the formation of successive distinct TiO2-ALD and SnO(x)-CVD layers.

  8. Design and implementation of a novel portable atomic layer deposition/chemical vapor deposition hybrid reactor

    Science.gov (United States)

    Selvaraj, Sathees Kannan; Jursich, Gregory; Takoudis, Christos G.

    2013-09-01

    We report the development of a novel portable atomic layer deposition chemical vapor deposition (ALD/CVD) hybrid reactor setup. Unique feature of this reactor is the use of ALD/CVD mode in a single portable deposition system to fabricate multi-layer thin films over a broad range from "bulk-like" multi-micrometer to nanometer atomic dimensions. The precursor delivery system and control-architecture are designed so that continuous reactant flows for CVD and cyclic pulsating flows for ALD mode are facilitated. A custom-written LabVIEW program controls the valve sequencing to allow synthesis of different kinds of film structures under either ALD or CVD mode or both. The entire reactor setup weighs less than 40 lb and has a relatively small footprint of 8 × 9 in., making it compact and easy for transportation. The reactor is tested in the ALD mode with titanium oxide (TiO2) ALD using tetrakis(diethylamino)titanium and water vapor. The resulting growth rate of 0.04 nm/cycle and purity of the films are in good agreement with literature values. The ALD/CVD hybrid mode is demonstrated with ALD of TiO2 and CVD of tin oxide (SnOx). Transmission electron microscopy images of the resulting films confirm the formation of successive distinct TiO2-ALD and SnOx-CVD layers.

  9. Programmable SERS active substrates for chemical and biosensing applications using amorphous/crystalline hybrid silicon nanomaterial

    Science.gov (United States)

    Powell, Jeffery Alexander; Venkatakrishnan, Krishnan; Tan, Bo

    2016-01-01

    We present the creation of a unique nanostructured amorphous/crystalline hybrid silicon material that exhibits surface enhanced Raman scattering (SERS) activity. This nanomaterial is an interconnected network of amorphous/crystalline nanospheroids which form a nanoweb structure; to our knowledge this material has not been previously observed nor has it been applied for use as a SERS sensing material. This material is formed using a femtosecond synthesis technique which facilitates a laser plume ion condensation formation mechanism. By fine-tuning the laser plume temperature and ion interaction mechanisms within the plume, we are able to precisely program the relative proportion of crystalline Si to amorphous Si content in the nanospheroids as well as the size distribution of individual nanospheroids and the size of Raman hotspot nanogaps. With the use of Rhodamine 6G (R6G) and Crystal Violet (CV) chemical dyes, we have been able to observe a maximum enhancement factor of 5.38 × 106 and 3.72 × 106 respectively, for the hybrid nanomaterial compared to a bulk Si wafer substrate. With the creation of a silicon-based nanomaterial capable of SERS detection of analytes, this work demonstrates a redefinition of the role of nanostructured Si from an inactive to SERS active role in nano-Raman sensing applications.

  10. Particle production and chemical freezeout from the hybrid UrQMD approach at NICA energies

    CERN Document Server

    Tawfik, Abdel Nasser; Shalaby, Asmaa G; Hanafy, Mahmoud; Sorin, Alexander; Rogachevsky, Oleg; Scheinast, Werner

    2016-01-01

    The energy dependence of various particle ratios is calculated within the Ultra-Relativistic Quantum Molecular Dynamics approach and compared with the hadron resonance gas (HRG) model and measurements from various experiments, including RHIC-BES, SPS and AGS. It is found that the UrQMD particle ratios agree well with the experimental results at the RHIC-BES energies. Thus, we have utilized UrQMD in simulating particle ratios at other beam energies down to 3 GeV, which will be accessed at NICA and FAIR future facilities. We observe that the particle ratios for crossover and first-order phase transition, implemented in the hybrid UrQMD v3.4, are nearly indistinguishable, especially at low energies (at large baryon chemical potentials or high density).

  11. Particle production and chemical freezeout from the hybrid UrQMD approach at NICA energies

    Energy Technology Data Exchange (ETDEWEB)

    Nasser Tawfik, Abdel [Modern University for Technology and Information (MTI), Egyptian Center for Theoretical Physics (ECTP), Cairo (Egypt); World Laboratory for Cosmology and Particle Physics (WLCAPP), Cairo (Egypt); Abou-Salem, Loutfy I. [Benha University, Physics Department, Faculty of Science, Benha (Egypt); Shalaby, Asmaa G.; Hanafy, Mahmoud [World Laboratory for Cosmology and Particle Physics (WLCAPP), Cairo (Egypt); Benha University, Physics Department, Faculty of Science, Benha (Egypt); Sorin, Alexander [Joint Institute for Nuclear Research, Bogoliubov Laboratory of Theoretical Physics, Dubna, Moscow region (Russian Federation); Joint Institute for Nuclear Research, Veksler and Baldin Laboratory of High Energy Physics, Dubna, Moscow region (Russian Federation); National Research Nuclear University (MEPhI), Moscow (Russian Federation); Dubna International University, Dubna (Russian Federation); Rogachevsky, Oleg; Scheinast, Werner [Joint Institute for Nuclear Research, Veksler and Baldin Laboratory of High Energy Physics, Dubna, Moscow region (Russian Federation)

    2016-10-15

    The energy dependence of various particle ratios is calculated within the Ultra-relativistic Quantum Molecular Dynamics approach and compared with the hadron resonance gas (HRG) model and measurements from various experiments, including RHIC-BES, SPS and AGS. It is found that the UrQMD particle ratios agree well with the experimental results at the RHIC-BES energies. Thus, we have utilized UrQMD in simulating particle ratios at other beam energies down to 3GeV, which will be accessed at NICA and FAIR future facilities. We observe that the particle ratios for crossover and first-order phase transition, implemented in the hybrid UrQMD v3.4, are nearly indistinguishable, especially at low energies (at large baryon chemical potentials or high density). (orig.)

  12. MgB{sub 2} thin films by hybrid physical-chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Xi, X.X. [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States)]|[Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States)]. E-mail: xxx4@psu.edu; Pogrebnyakov, A.V. [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States)]|[Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Xu, S.Y.; Chen, K.; Cui, Y.; Maertz, E.C. [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States); Zhuang, C.G. [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States)]|[Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States)]|[Department of Physics, Peking University, Beijing 100871 (China); Li, Qi [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States); Lamborn, D.R. [Department of Chemical Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Redwing, J.M. [Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States)]|[Department of Chemical Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Liu, Z.K.; Soukiassian, A.; Schlom, D.G.; Weng, X.J.; Dickey, E.C. [Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Chen, Y.B.; Tian, W.; Pan, X.Q. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Cybart, S.A. [Department of Physics, University of California, Berkeley, CA 94720 (United States); Dynes, R.C. [Department of Physics, University of California, Berkeley, CA 94720 (United States)

    2007-06-01

    Hybrid physical-chemical vapor deposition (HPCVD) has been the most effective technique for depositing MgB{sub 2} thin films. It generates high magnesium vapor pressures and provides a clean environment for the growth of high purity MgB{sub 2} films. The epitaxial pure MgB{sub 2} films grown by HPCVD show higher-than-bulk T {sub c} due to tensile strain in the films. The HPCVD films are the cleanest MgB{sub 2} materials reported, allowing basic research, such as on magnetoresistance, that reveals the two-band nature of MgB{sub 2}. The carbon-alloyed HPCVD films demonstrate record-high H {sub c2} values promising for high magnetic field applications. The HPCVD films and multilayers have enabled the fabrication of high quality MgB{sub 2} Josephson junctions.

  13. Semiempirical Quantum Chemical Calculations Accelerated on a Hybrid Multicore CPU-GPU Computing Platform.

    Science.gov (United States)

    Wu, Xin; Koslowski, Axel; Thiel, Walter

    2012-07-10

    In this work, we demonstrate that semiempirical quantum chemical calculations can be accelerated significantly by leveraging the graphics processing unit (GPU) as a coprocessor on a hybrid multicore CPU-GPU computing platform. Semiempirical calculations using the MNDO, AM1, PM3, OM1, OM2, and OM3 model Hamiltonians were systematically profiled for three types of test systems (fullerenes, water clusters, and solvated crambin) to identify the most time-consuming sections of the code. The corresponding routines were ported to the GPU and optimized employing both existing library functions and a GPU kernel that carries out a sequence of noniterative Jacobi transformations during pseudodiagonalization. The overall computation times for single-point energy calculations and geometry optimizations of large molecules were reduced by one order of magnitude for all methods, as compared to runs on a single CPU core.

  14. Infrared light actuated shape memory effects in crystalline polyurethane/graphene chemical hybrids

    Science.gov (United States)

    Park, J. H.; Kim, B. K.

    2014-02-01

    A series of crystalline shape memory polyurethanes (SMPUs) were synthesized from polycaprolactone diols and 4,4‧-methylenedicyclohexyl diisocyanate (H12MDI) with chemical incorporation of allyl isocyanate modified graphene oxide (iGO) into the PU. Actuation of hybrid SMPUs by infrared (IR) absorption of iGO as well as the direct heat actuated SMPUs has been studied in terms of the isothermal crystallization rate, near-IR absorption, and thermal, mechanical, and shape memory properties. It was found that iGO functions as a multifunctional cross-linker at low contents and a nucleating agent at high contents, and as a reinforcing filler, while light absorption by the iGO induced melting of the PU soft segment, giving rise to a shape recovery of over 90% at 1% iGO (G10).

  15. Hybrid Cleaning Technology for Enhanced Post-Cu/Low-Dielectric Constant Chemical Mechanical Planarization Cleaning Performance

    Science.gov (United States)

    Ramachandran, Manivannan; Cho, Byoung-Jun; Kwon, Tae-Young; Park, Jin-Goo

    2013-05-01

    During chemical mechanical planarization (CMP), a copper/low-k surface is often contaminated by abrasive particles, organic materials and other additives. These contaminants need to be removed in the subsequent cleaning process with minimum material loss. In this study, a dilute amine-based alkaline cleaning solution is used along with physical force in the form of megasonic energy to remove particles and organic contaminants. Tetramethylammonium hydroxide (TMAH) and monoethanolamine (MEA) are used as an organic base and complexing agent, respectively, in the proposed solution. Ethanolamine acts as a corrosion inhibitor in the solution. Organic residue removal was confirmed through contact angle measurements and X-ray photoelectron spectroscopy analysis. Electrochemical studies showed that the proposed solution increases protection against corrosion, and that the hybrid cleaning technology resulted in higher particle removal efficiency from both the copper and low-k surfaces.

  16. Removal of trace organic chemicals and performance of a novel hybrid ultrafiltration-osmotic membrane bioreactor.

    Science.gov (United States)

    Holloway, Ryan W; Regnery, Julia; Nghiem, Long D; Cath, Tzahi Y

    2014-09-16

    A hybrid ultrafiltration-osmotic membrane bioreactor (UFO-MBR) was investigated for over 35 days for nutrient and trace organic chemical (TOrC) removal from municipal wastewater. The UFO-MBR system uses both ultrafiltration (UF) and forward osmosis (FO) membranes in parallel to simultaneously extract clean water from an activated sludge reactor for nonpotable (or environmental discharge) and potable reuse, respectively. In the FO stream, water is drawn by osmosis from activated sludge through an FO membrane into a draw solution (DS), which becomes diluted during the process. A reverse osmosis (RO) system is then used to reconcentrate the diluted DS and produce clean water suitable for direct potable reuse. The UF membrane extracts water, dissolved salts, and some nutrients from the system to prevent their accumulation in the activated sludge of the osmotic MBR. The UF permeate can be used for nonpotable reuse purposes (e.g., irrigation and toilet flushing). Results from UFO-MBR investigation illustrated that the chemical oxygen demand, total nitrogen, and total phosphorus removals were greater than 99%, 82%, and 99%, respectively. Twenty TOrCs were detected in the municipal wastewater that was used as feed to the UFO-MBR system. Among these 20 TOrCs, 15 were removed by the hybrid UFO-MBR system to below the detection limit. High FO membrane rejection was observed for all ionic and nonionic hydrophilic TOrCs and lower rejection was observed for nonionic hydrophobic TOrCs. With the exceptions of bisphenol A and DEET, all TOrCs that were detected in the DS were well rejected by the RO membrane. Overall, the UFO-MBR can operate sustainably and has the potential to be utilized for direct potable reuse applications.

  17. Ring Opening Reactions through C-O Bond Cleavage Uniquely Adding Chemical Functionality to Boron Subphthalocyanine

    Directory of Open Access Journals (Sweden)

    Catherine Bonnier

    2015-10-01

    Full Text Available We are reporting the unexpected reaction between bromo-boron subphthalocyanine (Br-BsubPc and THF, 1,4-dioxane or γ-butyrolactone that results in the ring opening of the solvent and its addition into the BsubPc moiety. Under heating, the endocyclic C-O bond of the solvent is cleaved and the corresponding bromoalkoxy-BsubPc derivative is obtained. These novel alkoxy-BsubPc derivatives have remaining alkyl-bromides suitable for further functionalization. The alkoxy-BsubPcs maintain the characteristic strongly absorption in visible spectrum and their fluorescence quantum yields.

  18. Research on the Interaction of Hydrogen-Bond Acidic Polymer Sensitive Sensor Materials with Chemical Warfare Agents Simulants by Inverse Gas Chromatography

    Directory of Open Access Journals (Sweden)

    Liu Yang

    2015-06-01

    Full Text Available Hydrogen-bond acidic polymers are important high affinity materials sensitive to organophosphates in the chemical warfare agent sensor detection process. Interactions between the sensor sensitive materials and chemical warfare agent simulants were studied by inverse gas chromatography. Hydrogen bonded acidic polymers, i.e., BSP3, were prepared for micro-packed columns to examine the interaction. DMMP (a nerve gas simulant and 2-CEES (a blister agent simulant were used as probes. Chemical and physical parameters such as heats of absorption and Henry constants of the polymers to DMMP and 2-CEES were determined by inverse gas chromatography. Details concerning absorption performance are also discussed in this paper.

  19. Research on the interaction of hydrogen-bond acidic polymer sensitive sensor materials with chemical warfare agents simulants by inverse gas chromatography.

    Science.gov (United States)

    Yang, Liu; Han, Qiang; Cao, Shuya; Huang, Feng; Qin, Molin; Guo, Chenghai; Ding, Mingyu

    2015-06-02

    Hydrogen-bond acidic polymers are important high affinity materials sensitive to organophosphates in the chemical warfare agent sensor detection process. Interactions between the sensor sensitive materials and chemical warfare agent simulants were studied by inverse gas chromatography. Hydrogen bonded acidic polymers, i.e., BSP3, were prepared for micro-packed columns to examine the interaction. DMMP (a nerve gas simulant) and 2-CEES (a blister agent simulant) were used as probes. Chemical and physical parameters such as heats of absorption and Henry constants of the polymers to DMMP and 2-CEES were determined by inverse gas chromatography. Details concerning absorption performance are also discussed in this paper.

  20. A hybrid method for prediction and repositioning of drug Anatomical Therapeutic Chemical classes.

    Science.gov (United States)

    Chen, Lei; Lu, Jing; Zhang, Ning; Huang, Tao; Cai, Yu-Dong

    2014-04-01

    In the Anatomical Therapeutic Chemical (ATC) classification system, therapeutic drugs are divided into 14 main classes according to the organ or system on which they act and their chemical, pharmacological and therapeutic properties. This system, recommended by the World Health Organization (WHO), provides a global standard for classifying medical substances and serves as a tool for international drug utilization research to improve quality of drug use. In view of this, it is necessary to develop effective computational prediction methods to identify the ATC-class of a given drug, which thereby could facilitate further analysis of this system. In this study, we initiated an attempt to develop a prediction method and to gain insights from it by utilizing ontology information of drug compounds. Since only about one-fourth of drugs in the ATC classification system have ontology information, a hybrid prediction method combining the ontology information, chemical interaction information and chemical structure information of drug compounds was proposed for the prediction of drug ATC-classes. As a result, by using the Jackknife test, the 1st prediction accuracies for identifying the 14 main ATC-classes in the training dataset, the internal validation dataset and the external validation dataset were 75.90%, 75.70% and 66.36%, respectively. Analysis of some samples with false-positive predictions in the internal and external validation datasets indicated that some of them may even have a relationship with the false-positive predicted ATC-class, suggesting novel uses of these drugs. It was conceivable that the proposed method could be used as an efficient tool to identify ATC-classes of novel drugs or to discover novel uses of known drugs.

  1. Carbene→N⁺ Coordination Bonds in Drugs: A Quantum Chemical Study

    Indian Academy of Sciences (India)

    DEEPIKA KATHURIA; MINHAJUL ARFEEN; APOORVA A BANKAR; PRASAD V BHARATAM

    2016-10-01

    Coordination chemistry of bonds between main group elements and electron donating ligands as in L→E (where E is electron acceptor centre like C⁰, Si⁰, N¹, P¹, As¹, B¹ and L is an electron donating N-heterocyclic carbene) have been recently gaining attention. Many important drugs have nitrogen atom as an electron acceptor center and can be represented by two general formulae:(L→N←L)⊕ and L→N-R. Divalent N¹ compounds possess two lone pairs at central nitrogen and low nucleophilicity associated with them are found to be of importance. In this article, electronic structure analysis of drug molecules like picloxydine, chlorhexidine, and moroxydine were performed at B3LYP/6-311++G(d,p) level of theory. Evaluation of electron localization function (ELF), molecular orbitals, charge density, nucleophilicity, proton affinity and complexation energy estimation confirm the presence of coordination bonds (L→N←L)⊕ in the above mentioned drug molecules in their cationic state. Further, electronic structure analysis of drugs like clonidine, apraclonidine, brimonidine and xylazine indicated the presence of electronic structure similar to L→N-R systems.

  2. Effects of Jigsaw Cooperative Learning and Animation Techniques on Students' Understanding of Chemical Bonding and Their Conceptions of the Particulate Nature of Matter

    Science.gov (United States)

    Karacop, Ataman; Doymus, Kemal

    2013-04-01

    The aim of this study was to determine the effect of jigsaw cooperative learning and computer animation techniques on academic achievements of first year university students attending classes in which the unit of chemical bonding is taught within the general chemistry course and these students' learning of the particulate nature of matter of this unit. The sample of this study consisted of 115 first-year science education students who attended the classes in which the unit of chemical bonding was taught in a university faculty of education during the 2009-2010 academic year. The data collection instruments used were the Test of Scientific Reasoning, the Purdue Spatial Visualization Test: Rotations, the Chemical Bonding Academic Achievement Test, and the Particulate Nature of Matter Test in Chemical Bonding (CbPNMT). The study was carried out in three different groups. One of the groups was randomly assigned to the jigsaw group, the second was assigned to the animation group (AG), and the third was assigned to the control group, in which the traditional teaching method was applied. The data obtained with the instruments were evaluated using descriptive statistics, one-way ANOVA, and MANCOVA. The results indicate that the teaching of chemical bonding via the animation and jigsaw techniques was more effective than the traditional teaching method in increasing academic achievement. In addition, according to findings from the CbPNMT, the students from the AG were more successful in terms of correct understanding of the particulate nature of matter.

  3. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells.

    Science.gov (United States)

    Noh, Jun Hong; Im, Sang Hyuk; Heo, Jin Hyuck; Mandal, Tarak N; Seok, Sang Il

    2013-04-10

    Chemically tuned inorganic-organic hybrid materials, based on CH3NH3(═MA)Pb(I(1-x)Br(x))3 perovskites, have been studied using UV-vis absorption and X-ray diffraction patterns and applied to nanostructured solar cells. The band gap engineering brought about by the chemical management of MAPb(I(1-x)Br(x))3 perovskites can be controllably tuned to cover almost the entire visible spectrum, enabling the realization of colorful solar cells. We demonstrate highly efficient solar cells exhibiting 12.3% in a power conversion efficiency of under standard AM 1.5, for the most efficient device, as a result of tunable composition for the light harvester in conjunction with a mesoporous TiO2 film and a hole conducting polymer. We believe that the works highlighted in this paper represent one step toward the realization of low-cost, high-efficiency, and long-term stability with colorful solar cells.

  4. Using Concept Mapping to Uncover Students' Knowledge Structures of Chemical Bonding Concepts

    Science.gov (United States)

    Burrows, Nikita L.; Mooring, Suazette Reid

    2015-01-01

    General chemistry is the first undergraduate course in which students further develop their understanding of fundamental chemical concepts. Many of these fundamental topics highlight the numerous conceptual interconnections present in chemistry. However, many students possess incoherent knowledge structures regarding these topics. Therefore,…

  5. Catalytic C-C Bond Cleavage for the Production of Chemicals from Lignin

    NARCIS (Netherlands)

    Jastrzebski, R.

    2016-01-01

    Lignin is a major component of lignocellulosic biomass and could be an important renewable feedstock in industry for the production of (aromatic) bulk and fine chemicals. To this end, the development of new catalytic processes is required; both to depolymerise the biopolymer into small aromatic buil

  6. Catalytic C-C Bond Cleavage for the Production of Chemicals from Lignin

    NARCIS (Netherlands)

    Jastrzebski, R.|info:eu-repo/dai/nl/338017747

    2016-01-01

    Lignin is a major component of lignocellulosic biomass and could be an important renewable feedstock in industry for the production of (aromatic) bulk and fine chemicals. To this end, the development of new catalytic processes is required; both to depolymerise the biopolymer into small aromatic

  7. The mystery of gold's chemical activity: local bonding, morphology and reactivity of atomic oxygen.

    Science.gov (United States)

    Baker, Thomas A; Liu, Xiaoying; Friend, Cynthia M

    2011-01-07

    Recently, gold has been intensely studied as a catalyst for key synthetic reactions. Gold is an attractive catalyst because, surprisingly, it is highly active and very selective for partial oxidation processes suggesting promise for energy-efficient "green" chemistry. The underlying origin of the high activity of Au is a controversial subject since metallic gold is commonly thought to be inert. Herein, we establish that one origin of the high activity for gold catalysis is the extremely reactive nature of atomic oxygen bound in 3-fold coordination sites on metallic gold. This is the predominant form of O at low concentrations on the surface, which is a strong indication that it is most relevant to catalytic conditions. Atomic oxygen bound to metallic Au in 3-fold sites has high activity for CO oxidation, oxidation of olefins, and oxidative transformations of alcohols and amines. Among the factors identified as important in Au-O interaction are the morphology of the surface, the local binding site of oxygen, and the degree of order of the oxygen overlayer. In this Perspective, we present an overview of both theory and experiments that identify the reactive forms of O and their associated charge density distributions and bond strengths. We also analyze and model the release of Au atoms induced by O binding to the surface. This rough surface also has the potential for O(2) dissociation, which is a critical step if Au is to be activated catalytically. We further show the strong parallels between product distributions and reactivity for O-covered Au at low pressure (ultrahigh vacuum) and for nanoporous Au catalysts operating at atmospheric pressure as evidence that atomic O is the active species under working catalytic conditions when metallic Au is present. We briefly discuss the possible contributions of oxidants that may contain intact O-O bonds and of the Au-metal oxide support interface in Au catalysis. Finally, the challenges and future directions for fully

  8. The Synthesis, Structures, and Chemical Properties of Macrocyclic Ligands Covalently Bonded into Layered Arrays

    Energy Technology Data Exchange (ETDEWEB)

    Clearfield, Abraham [Texas A & M Univ., College Station, TX (United States)

    2014-11-01

    In this part of the proposal we have concentrated on the surface functionalization of α-zirconium phosphate of composition Zr(O3POH)2•H2O. It is a layered compound that can be prepared as particles as small as 30 nm to single crystals in the range of cm. This compound is an ion exchanger with a capacity of 6.64 meq per gram. It finds use as a catalyst, proton conductor, sensors, biosensors, in kidney dialysis and drug delivery. By functionalizing the surface additional uses are contemplated as will be described. The layers consist of the metal, with 4+ charge, that is positioned slightly above and below the mean layer plane and bridged by three of the four phosphate oxygens. The remaining POH groups point into the interlayer space creating double rows of POH groups but single arrays on the surface layers. The surface groups are reactive and we were able to bond silanes, isocyanates, epoxides, acrylates ` and phosphates to the surface POH groups. The layers are easily exfoliated or filled with ions by ion exchange or molecules by intercalation reactions. Highlights of our work include, in addition to direct functionalization of the surfaces, replacement of the protons on the surface with ions of different charge. This allows us to bond phosphates, biophosphates, phosphonic acids and alcohols to the surface. By variation of the ion charge of the ions that replace the surface protons, different surface structures are obtained. We have already shown that polymer fillers, catalysts and Janus particles may be prepared. The combination of surface functionalization with the ability to insert molecules and ions between the layers allow for a rich development of numerous useful other applications as well as nano-surface chemistry.

  9. The effect of working pressure on the chemical bond structure and hydrophobic properties of PET surface treated by N ion beams bombardment

    Energy Technology Data Exchange (ETDEWEB)

    Ding Wanyu, E-mail: dwysd_2000@163.com [Engineering Research Center of Optoelectronic Materials and Devices Education Department of Liaoning Province, Dalian, 116028 (China) and School of Materials Science and Engineering, Dalian Jiaotong University, Dalian, 116028 (China) and Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Ministry of Education, Dalian, 116024 (China); Ju Dongying, E-mail: dyju@sit.ac.jp [Department of Material Science and Engineering, Saitama Institute of Technology Fukaya, 369-0293 (Japan); Chai Weiping, E-mail: wpchai@djtu.edu.cn [Engineering Research Center of Optoelectronic Materials and Devices Education Department of Liaoning Province, Dalian, 116028 (China); School of Materials Science and Engineering, Dalian Jiaotong University, Dalian, 116028 (China)

    2010-09-01

    Polyethylene terephthalate (PET) surface was bombarded by N ion beams at room temperature. Varying the working pressure of the ion beams, PET surfaces with different composition and properties were obtained. Characterization by X-ray photoelectron spectrometry showed that only on film surface, ester bonds, especially C-O bonds, were broken and N element chemical bonded with C. The influence depth was less than 5 nm because of the lower ion energy (about 10{sup 3} eV). Contact angle results revealed that with increasing the working pressure of ion beams, the contact angle of PET surface to pure water increased from 51 deg. to 130 deg.. With these results, one conclusion could be deduced that the hydrophilic and hydrophobic properties of PET surface could be influenced by N atom chemical bond with C, which in turn is controlled by the working pressure of N ion beams.

  10. Bond additivity corrections for quantum chemistry methods

    Energy Technology Data Exchange (ETDEWEB)

    C. F. Melius; M. D. Allendorf

    1999-04-01

    In the 1980's, the authors developed a bond-additivity correction procedure for quantum chemical calculations called BAC-MP4, which has proven reliable in calculating the thermochemical properties of molecular species, including radicals as well as stable closed-shell species. New Bond Additivity Correction (BAC) methods have been developed for the G2 method, BAC-G2, as well as for a hybrid DFT/MP2 method, BAC-Hybrid. These BAC methods use a new form of BAC corrections, involving atomic, molecular, and bond-wise additive terms. These terms enable one to treat positive and negative ions as well as neutrals. The BAC-G2 method reduces errors in the G2 method due to nearest-neighbor bonds. The parameters within the BAC-G2 method only depend on atom types. Thus the BAC-G2 method can be used to determine the parameters needed by BAC methods involving lower levels of theory, such as BAC-Hybrid and BAC-MP4. The BAC-Hybrid method should scale well for large molecules. The BAC-Hybrid method uses the differences between the DFT and MP2 as an indicator of the method's accuracy, while the BAC-G2 method uses its internal methods (G1 and G2MP2) to provide an indicator of its accuracy. Indications of the average error as well as worst cases are provided for each of the BAC methods.

  11. Thermal-mechanical-chemical responses of polymer-bonded explosives using a mesoscopic reactive model under impact loading.

    Science.gov (United States)

    Wang, XinJie; Wu, YanQing; Huang, FengLei

    2017-01-05

    A mesoscopic framework is developed to quantify the thermal-mechanical-chemical responses of polymer-bonded explosive (PBX) samples under impact loading. A mesoscopic reactive model is developed for the cyclotetramethylenetetranitramine (HMX) crystal, which incorporates nonlinear elasticity, crystal plasticity, and temperature-dependent chemical reaction. The proposed model was implemented in the finite element code ABAQUS by the user subroutine VUMAT. A series of three-dimensional mesoscale models were constructed and calculated under low-strength impact loading scenarios from 100m/s to 600m/s where only the first wave transit is studied. Crystal anisotropy and microstructural heterogeneity are responsible for the nonuniform stress field and fluctuations of the stress wave front. At a critical impact velocity (≥300m/s), a chemical reaction is triggered because the temperature contributed by the volumetric and plastic works is sufficiently high. Physical quantities, including stress, temperature, and extent of reaction, are homogenized from those across the microstructure at the mesoscale to compare with macroscale measurements, which will advance the continuum-level models. The framework presented in this study has important implications in understanding hot spot ignition processes and improving predictive capabilities in energetic materials.

  12. Electronic parameters of Sr2M2O7 (M = V, Nb, Ta) and Sr-O chemical bonding

    DEFF Research Database (Denmark)

    Atuchin, Victor V.; Grivel, Jean-Claude; Zhang, Zhaoming

    2010-01-01

    on the formation of the Sr-O bonds. The chemical bonding effects were considered on the basis of our XPS results for Sr2Nb2O7 and Sr2Ta2O7 and the previously published structural and XPS data for other Sr-oxide compounds. A new empirical relationship between Δ(O-Sr) and L(Sr-O) was obtained. Possible applications...

  13. The bonding picture in hypervalent XF3 (X = Cl, Br, I, At) fluorides revisited with quantum chemical topology.

    Science.gov (United States)

    Amaouch, Mohamed; Sergentu, Dumitru-Claudiu; Steinmetz, David; Maurice, Rémi; Galland, Nicolas; Pilmé, Julien

    2017-08-03

    Hypervalent XF3 (X = Cl, Br, I, At) fluorides exhibit T-shaped C2V equilibrium structures with the heavier of them, AtF3 , also revealing an almost isoenergetic planar D3h structure. Factors explaining this behavior based on simple "chemical intuition" are currently missing. In this work, we combine non-relativistic (ClF3 ), scalar-relativistic and two-component (X = Br - At) density functional theory calculations, and bonding analyses based on the electron localization function and the quantum theory of atoms in molecules. Typical signatures of charge-shift bonding have been identified at the bent T-shaped structures of ClF3 and BrF3 , while the bonds of the other structures exhibit a dominant ionic character. With the aim of explaining the D3h structure of AtF3 , we extend the multipole expansion analysis to the framework of two-component single-reference calculations. This methodological advance enables us to rationalize the relative stability of the T-shaped C2v and the planar D3h structures: the Coulomb repulsions between the two lone-pairs of the central atom and between each lone-pair and each fluorine ligand are found significantly larger at the D3h structures than at the C2v ones for X = Cl - I, but not with X = At. This comes with the increasing stabilization, along the XF3 series, of the planar D3h structure with respect to the global T-shaped C2v minima. Hence, we show that the careful use of principles that are at the heart of the valence shell electron pair repulsion model provides reasonable justifications for stable planar D3h structures in AX3 E2 systems. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  14. Determining hydrogen-bond interactions in spider silk with 1H-13C HETCOR fast MAS solid-state NMR and DFT proton chemical shift calculations.

    Science.gov (United States)

    Holland, Gregory P; Mou, Qiushi; Yarger, Jeffery L

    2013-07-28

    Two-dimensional (2D) (1)H-(13)C heteronuclear correlation (HETCOR) solid-state NMR spectra collected with fast magic angle spinning (MAS) are used in conjunction with density functional theory (DFT) proton chemical shift calculations to determine the hydrogen-bonding strength for ordered β-sheet and disordered 310-helical structures in spider dragline silk. The hydrogen-bond strength is determined to be identical for both structures in spider silk with a 1.83-1.84 Å NH···OC hydrogen-bond distance.

  15. Magnetovolume and chemical bonding effects of Sn atom in the γ'-(Fe1-xSnx)4N compounds

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Combining x-ray diffraction and high pressure Mossbauer spectroscopy,the structure and the hyperfine parameters of Sn substituted for Fe in γ'-Fe4N were in-vestigated. The results of x-ray diffraction indicate that single phase γ'-(Fel-xSnx)4Ncompounds can be synthesized in the composition range 0≤ x ≤ 0.3, and the latticeparameter can be well fitted with two linear formulas α0(x) = 3.795 + 0.019 × x (0.0≤x ≤0.10) and α0(x) = 3.795+ 0.228 × (x- 0.1)(0.10 ≤ x ≤0.30) for different contentof Sn. Using high pressure Mossbauer spectra, the influences of the magnetovolunceffect and the chemical bonding effect of Sn atom on the hyperfine magnetic field andthe isomer shift were first distinguished. It is found that the magnetovolume and thechemical bonding have different influences on the properties of γ'-(Fe1-xSnx)4N, andthe latter plays a more important role.

  16. Mechanical control of the plasmon coupling with Au nanoparticle arrays fixed on the elastomeric film via chemical bond

    Science.gov (United States)

    Bedogni, Elena; Kaneko, Satoshi; Fujii, Shintaro; Kiguchi, Manabu

    2017-03-01

    We have fabricated Au nanoparticle arrays on the flexible poly(dimethylsiloxane) (PDMS) film. The nanoparticles were bound to the film via a covalent bond by a ligand exchange reaction. Thanks to the strong chemical bonding, highly stable and uniformly dispersed Au nanoparticle arrays were fixed on the PDMS film. The Au nanoparticle arrays were characterized by the UV–vis, scanning electron microscope (SEM) and surface enhanced Raman scattering (SERS). The UV–vis and SEM measurements showed the uniformity of the surface-dispersed Au nanoparticles, and SERS measurement confirmed the chemistry of the PDMS film. Reflecting the high stability and the uniformity of the Au nanoparticle arrays, the plasmon wavelength of the Au nanoparticles reversely changed with modulation of the interparticle distance, which was induced by the stretching of the PDMS film. The plasmon wavelength linearly decreased from 664 to 591 nm by stretching of 60%. The plasmon wavelength shift can be explained by the change in the strength of the plasmon coupling which is mechanically controlled by the mechanical strain.

  17. Hydrogen trapping in MAX phase Ti3SiC2: Insight from chemical bonding by density functional theory

    Science.gov (United States)

    Zhang, H. F.; Ren, X. L.; Zhang, J. Y.; Huang, J.; Xu, C. H.; Du, A. J.; Wang, Y. X.

    2017-05-01

    Understanding hydrogen (H) isotope trapping in materials is essential to optimize the material performance in a nuclear environment for the fabrication of nuclear devices. By using the density functional theory (DFT), herein we have systematically investigated the behaviour of hydrogen in the MAX phase Ti3SiC2 in the presence and absence of a vacancy (V). When a vacancy is generated in a favorable plane for hydrogen accumulating (Si plane), two distinct behavours of hydrogen in the Si plane have been identified by chemical bond analysis, i.e., the Ti-H and Si-H bonding, which synergistically results in VH2 complexes prevailing in the host matrix. Different from metals and other ceramics, the trapping mechanism of H in Ti3SiC2 essentially originates from the spatially inhomogeneous distribution of free-charge density and large discrepancy of electronegativity between the host atoms. Our theoretical results offer great insights into the rational design of new high-performance nuclear materials.

  18. Evidence for excited-state intramolecular proton transfer in 4-chlorosalicylic acid from combined experimental and computational studies: Quantum chemical treatment of the intramolecular hydrogen bonding interaction

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Bijan Kumar [Department of Chemistry, University of Calcutta, 92 Acharya Prafulla Chandra Road, Calcutta 700009 (India); Guchhait, Nikhil, E-mail: nikhil.guchhait@rediffmail.com [Department of Chemistry, University of Calcutta, 92 Acharya Prafulla Chandra Road, Calcutta 700009 (India)

    2012-07-25

    Highlights: Black-Right-Pointing-Pointer Experimental and computational studies on the photophysics of 4-chlorosalicylic acid. Black-Right-Pointing-Pointer Spectroscopically established ESIPT reaction substantiated by theoretical calculation. Black-Right-Pointing-Pointer Quantum chemical treatment of IMHB unveils strength, nature and directional nature. Black-Right-Pointing-Pointer Superiority of quantum chemical treatment of H-bond over geometric criteria. Black-Right-Pointing-Pointer Role of H-bond as a modulator of aromaticity. -- Abstract: The photophysical study of a pharmaceutically important chlorine substituted derivative of salicylic acid viz., 4-chlorosalicylic acid (4ClSA) has been carried out by steady-state absorption, emission and time-resolved emission spectroscopy. A large Stokes shifted emission band with negligible solvent polarity dependence marks the spectroscopic signature of excited-state intramolecular proton transfer (ESIPT) reaction in 4ClSA. Theoretical calculation by ab initio and Density Functional Theory methods yields results consistent with experimental findings. Theoretical potential energy surfaces predict the occurrence of proton transfer in S{sub 1}-state. Geometrical and energetic criteria, Atoms-In-Molecule topological parameters, Natural Bond Orbital population analysis have been exploited to evaluate the intramolecular hydrogen bond (IMHB) interaction and to explore its directional nature. The inter-correlation between aromaticity and resonance assisted H-bond is also discussed in this context. Our results unveil that the quantum chemical treatment is a more accurate tool to assess hydrogen bonding interaction in comparison to geometrical criteria.

  19. A Comparative Evaluation of Effect of Different Chemical Solvents on the Shear Bond Strength of Glass Fiber reinforced Post to Core Material.

    Science.gov (United States)

    Sharma, Ashish; Samadi, Firoza; Jaiswal, Jn; Saha, Sonali

    2014-01-01

    To compare the effect of different chemical solvents on glass fiber reinforced posts and to study the effect of these solvents on the shear bond strength of glass fiber reinforced post to core material. This study was conducted to evaluate the effect of three chemical solvents, i.e. silane coupling agent, 6% H2O2 and 37% phosphoric acid on the shear bond strength of glass fiber post to a composite resin restorative material. The changes in post surface characteristics after different treatments were also observed, using scanning electron microscopy (SEM) and shear bond strength was analyzed using universal testing machine (UTM). Surface treatment with hydrogen peroxide had greatest impact on the post surface followed by 37% phosphoric acid and silane. On evaluation of the shear bond strength, 6% H2O2 exhibited the maximum shear bond strength followed in descending order by 37% phosphoric acid and silane respectively. The surface treatment of glass fiber post enhances the adhesion between the post and composite resin which is used as core material. Failure of a fiber post and composite resin core often occurs at the junction between the two materials. This failure process requires better characterization. How to cite this article: Sharma A, Samadi F, Jaiswal JN, Saha S. A Comparative Evaluation of Effect of Different Chemical Solvents on the Shear Bond Strength of Glass Fiber Reinforced Post to Core Material. Int J Clin Pediatr Dent 2014;7(3):192-196.

  20. The Effect of Various Types of Mechanical and Chemical Preconditioning on the Shear Bond Strength of Orthodontic Brackets on Zirconia Restorations

    Directory of Open Access Journals (Sweden)

    Jihun Kim

    2017-01-01

    Full Text Available The purpose of this study was to investigate the combined effect of mechanical and chemical treatments on the shear bond strength (SBS of metal orthodontic brackets on zirconia restoration. The zirconia specimens were randomly divided into 12 groups (n=10 according to three factors: AL (Al2O3 and CO (CoJet™ by sandblasting material; SIL (silane, ZPP (Zirconia Prime Plus, and SBU (Single Bond Universal by primer; and N (not thermocycled and T (thermocycled. The specimens were evaluated for shear bond strength, and the fractured surfaces were observed using a stereomicroscope. Scanning electron microscopy images were also obtained. CO-SBU combination had the highest bond strength after thermocycling (26.2 MPa. CO-SIL showed significantly higher SBS than AL-SIL (p0.05. Modified Adhesive Remnant Index (ARI scoring and SEM figures were consistent with the results of the surface treatments. In conclusion, CO-SBU, which combines the effect of increased surface area and chemical bonding with both 10-MDP and silane, showed the highest SBS. Sandblasting with either material improved the mechanical bonding by increasing the surface area, and all primers showed clinically acceptable increase of shear bond strength for orthodontic treatment.

  1. Robust C–C bonded porous networks with chemically designed functionalities for improved CO2 capture from flue gas

    Directory of Open Access Journals (Sweden)

    Damien Thirion

    2016-10-01

    Full Text Available Effective carbon dioxide (CO2 capture requires solid, porous sorbents with chemically and thermally stable frameworks. Herein, we report two new carbon–carbon bonded porous networks that were synthesized through metal-free Knoevenagel nitrile–aldol condensation, namely the covalent organic polymer, COP-156 and 157. COP-156, due to high specific surface area (650 m2/g and easily interchangeable nitrile groups, was modified post-synthetically into free amine- or amidoxime-containing networks. The modified COP-156-amine showed fast and increased CO2 uptake under simulated moist flue gas conditions compared to the starting network and usual industrial CO2 solvents, reaching up to 7.8 wt % uptake at 40 °C.

  2. Electronic structure, chemical bond and thermal stability of hydrogen absorber Li2MgN2H2

    Institute of Scientific and Technical Information of China (English)

    WANG Qiang; CHEN YunGui; WU ChaoLing; TAO MingDa; GAI JingGang

    2009-01-01

    The lowest total energy crystal structure of Li2MgN2H2 was identified by the first principle calculation with RPBE exchange-correlation function. Furthermore, the fine structure parameters of this crystal structure were calculated with PBE and PW91 exchange-correlation function. In a further step, the density of states, electron density, charge density difference on (0 0 1) plane and heat of formation of Li2MgN2H2 hydrogenation were computed with PW91 exchange-correlation function. Consequently, the electronic structures and chemical bonds in this compound were analyzed and discussed, and then the thermodynamic character of Li2MgN2H2 for hydrogen storage was evacuated.

  3. Evidence for porphyrins bound, via ester bonds, to the Messel oil shale kerogen by selective chemical degradation experiments

    Science.gov (United States)

    Huseby, B.; Ocampo, R.

    1997-09-01

    High amounts of nickel mono- and di-acid porphyrins were released from Messel oil shale kerogen (Eocene, Germany) by selective chemical degradation (acid and base hydrolysis). The released porphyrin fractions were quantified (UV-vis) and their constituents isolated and characterized at the molecular level (UV-vis, MS, NMR). The mono-acid porphyrin fraction released contained four compounds of similar abundance which arise from an obvious chlorophyll or bacteriochlorophyll precursor. The di-acid porphyrin fraction was, however, dominated by far by one compound, mesoporphyrin IX, which must have originated from heme-like precursors (heme, cytochromes, etc.). These results show unambigously that the released mono- and di-acid porphyrins were linked to the macromolecular kerogen network via ester bonds and suggest that precursor heme-like pigments could be selectively and/or more readily incorporated into the macromolecular kerogen network than precursor chlorophylls and bacteriochlorophylls.

  4. Robust C-C bonded porous networks with chemically designed functionalities for improved CO2 capture from flue gas.

    Science.gov (United States)

    Thirion, Damien; Lee, Joo S; Özdemir, Ercan; Yavuz, Cafer T

    2016-01-01

    Effective carbon dioxide (CO2) capture requires solid, porous sorbents with chemically and thermally stable frameworks. Herein, we report two new carbon-carbon bonded porous networks that were synthesized through metal-free Knoevenagel nitrile-aldol condensation, namely the covalent organic polymer, COP-156 and 157. COP-156, due to high specific surface area (650 m(2)/g) and easily interchangeable nitrile groups, was modified post-synthetically into free amine- or amidoxime-containing networks. The modified COP-156-amine showed fast and increased CO2 uptake under simulated moist flue gas conditions compared to the starting network and usual industrial CO2 solvents, reaching up to 7.8 wt % uptake at 40 °C.

  5. Robust C–C bonded porous networks with chemically designed functionalities for improved CO2 capture from flue gas

    Science.gov (United States)

    Thirion, Damien; Lee, Joo S; Özdemir, Ercan

    2016-01-01

    Effective carbon dioxide (CO2) capture requires solid, porous sorbents with chemically and thermally stable frameworks. Herein, we report two new carbon–carbon bonded porous networks that were synthesized through metal-free Knoevenagel nitrile–aldol condensation, namely the covalent organic polymer, COP-156 and 157. COP-156, due to high specific surface area (650 m2/g) and easily interchangeable nitrile groups, was modified post-synthetically into free amine- or amidoxime-containing networks. The modified COP-156-amine showed fast and increased CO2 uptake under simulated moist flue gas conditions compared to the starting network and usual industrial CO2 solvents, reaching up to 7.8 wt % uptake at 40 °C. PMID:28144294

  6. Effects of lithium doping on microstructure, electrical properties, and chemical bonds of sol-gel derived NKN thin films

    Science.gov (United States)

    Lin, Chun-Cheng; Chen, Chan-Ching; Weng, Chung-Ming; Chu, Sheng-Yuan; Hong, Cheng-Shong; Tsai, Cheng-Che

    2015-02-01

    Highly (100/110) oriented lead-free Lix(Na0.5K0.5)1-xNbO3 (LNKN, x = 0, 0.02, 0.04, and 0.06) thin films are fabricated on Pt/Ti/SiO2/Si substrates via a sol-gel processing method. The lithium (Li) dopants modify the microstructure and chemical bonds of the LNKN films, and therefore improve their electrical properties. The optimal values of the remnant polarization (Pr = 14.3 μC/cm2), piezoelectric coefficient (d33 = 48.1 pm/V), and leakage current (Poole-Frenkel emission effect under high electric fields.

  7. Naturally occurring hybrids derived from γ-amino acids and sugars with potential tail to tail ether-bonds

    Science.gov (United States)

    Feng, Zi-Ming; Zhan, Zhi-Lai; Yang, Ya-Nan; Jiang, Jian-Shuang; Zhang, Pei-Cheng

    2016-05-01

    The basic substances of life include various amino acids and sugars. To search such molecules is the precondition to understand the essential nature. Here we reported four unprecedented hybrids of γ-amino acids and sugars from the roots of Ranunculus ternatus, which possess potential tail to tail ether-connected (6,6-ether-connected) modes in the sugar moiety. The structures of these hybrids were elucidated by extensive analyses of spectra and calculated electronic circular dichroism (ECD) method.

  8. Investigation of finite-size effects in chemical bonding of AuPd nanoalloys

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Beien [Division of Interfacial Water and Key Laboratory of Interfacial Physics and Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Oğuz, Ismail Can; Guesmi, Hazar, E-mail: hazar.guesmi@enscm.fr [CNRS-ICG UMR 5253, équipe MACS, 8 rue de l’Ecole Normale, 34296 Montpellier (France)

    2015-10-14

    In this paper, the size-dependent changes in energetic, vibrational, and electronic properties of C–O gas molecule interacting with surface Pd atom of a variety of AuPd nanoalloy structures are investigated by means of first principles calculations. The variation in C–O adsorption energies, C–O vibration frequencies (ν{sub C−O}), and Pd d-bond centers (ε{sub d}) on a series of non-supported Au{sub n−1}–Pd{sub 1} nanoparticles (with n varying from 13 to 147) and on two semi-finite surfaces are inspected with cluster size. We demonstrate for the first time that, with small AuPd bimetallic three-dimensional clusters as TOh{sub 38}, one can reach cluster size convergence even for such a sensitive observable as the adsorption energy on a metal surface. Indeed, the results show that the adsorbate-induced perturbation is extremely local and it only concerns the isolated Pd interacting with the reactive gas molecule. Except for 13 atom clusters, in which molecular behaviour is predominant, no finite-size effects are observed for surface Pd atom substituted in AuPd free nanoclusters above 38 atoms.

  9. Crystal structure and chemical bonding of the high-temperature phase of AgN3.

    Science.gov (United States)

    Schmidt, Carsten L; Dinnebier, Robert; Wedig, Ulrich; Jansen, Martin

    2007-02-05

    The crystal structure of silver azide (AgN3) in its high-temperature (HT) modification was determined from X-ray powder diffraction data, recorded at T = 170 degrees C and was further refined by the Rietveld method. The structure is monoclinic (P21/c (No. 14), a = 6.0756(2) A, b = 6.1663(2) A, c = 6.5729(2) A, beta = 114.19(0) degrees, V = 224.62(14) A3, Z = 4) and consists of two-dimensional Ag and N containing layers in which the silver atoms are coordinated by four nitrogen atoms exhibiting a distorted square coordination environment. These sheets are linked together by weaker perpendicular Ag-N contacts, thus forming a 4 + 2 coordination geometry around the silver atoms. The phase transition has been characterized by DTA, DSC, and measurement of the density, as well as of the ionic conductivity. Both, the room-temperature and the HT phase are electrically insulating. This fact is getting support by DFT band structure calculations within the generalized gradient approximation, using the PBE functional. On the basis of the DFT band structure, the bonding characteristics of both phases are essentially the same. Finally, the implication of the existence of a low-symmetry HT-phase in a crystalline explosive concerning decomposition mechanisms is discussed.

  10. Crystal Structure and Chemical Bonding of the High-Temperature Phase of AgN3

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt,C.; Dinnebier, R.; Wedig, U.; Jansen, M.

    2007-01-01

    The crystal structure of silver azide (AgN{sub 3}) in its high-temperature (HT) modification was determined from X-ray powder diffraction data, recorded at T = 170 {sup o}C and was further refined by the Rietveld method. The structure is monoclinic (P2{sub 1}lc (No. 14), a = 6.0756(2) {angstrom}, b = 6.1663(2) {angstrom}, c = 6.5729(2) {angstrom}, {beta} = 114.19(0){sup o}, V = 224.62(14) {angstrom}{sup 3}, Z = 4) and consists of two-dimensional Ag and N containing layers in which the silver atoms are coordinated by four nitrogen atoms exhibiting a distorted square coordination environment. These sheets are linked together by weaker perpendicular Ag-N contacts, thus forming a 4 + 2 coordination geometry around the silver atoms. The phase transition has been characterized by DTA, DSC, and measurement of the density, as well as of the ionic conductivity. Both, the room-temperature and the HT phase are electrically insulating. This fact is getting support by DFT band structure calculations within the generalized gradient approximation, using the PBE functional. On the basis of the DFT band structure, the bonding characteristics of both phases are essentially the same. Finally, the implication of the existence of a low-symmetry HT-phase in a crystalline explosive concerning decomposition mechanisms is discussed.

  11. Surface chemical-bonds analysis of silicon particles from diamond-wire cutting of crystalline silicon

    Science.gov (United States)

    Benayad, Anass; Hajjaji, Hamza; Coustier, Fabrice; Benmansour, Malek; Chabli, Amal

    2016-12-01

    The recycling of the Si powder resulting from the kerf loss during silicon ingot cutting into wafers for photovoltaic application shows both significant and achievable economic and environmental benefits. A combined x-ray photoelectron spectroscopy (XPS), attenuated total reflection (ATR)-Fourier transform infrared (FTIR) and micro-Raman spectral analyses were applied to kerf-loss Si powders reclaimed from the diamond wire cutting using different cutting fluids. These spectroscopies performed in suitable configurations for the analysis of particles, yield detailed insights on the surface chemical properties of the powders demonstrating the key role of the cutting fluid nature. A combined XPS core peak, plasmon loss, and valence band study allow assessing a qualitative and quantitative chemical, structural change of the kerf-loss Si powders. The relative contribution of the LO and TO stretching modes to the Si-O-Si absorption band in the ATR-FTIR spectra provide a consistent estimation of the effective oxidation level of the Si powders. The change in the cutting media from deionized water to city water, induces a different silicon oxide layer thickness at the surface of the final kerf-loss Si, depending on the powder reactivity to the media. The surfactant addition induces an enhanced carbon contamination in the form of grafted carbonated species on the surface of the particles. The thickness of the modified surface, depending on the cutting media, was estimated based on a simple model derived from the combined XPS core level and plasmon peak intensities. The effective nature of these carbonated species, sensitive to the water quality, was evidenced based on coupled XPS core peak and valence band study. The present work paves the way to a controlled process to reclaim the kerf-loss Si powder without heavy chemical etching steps.

  12. FONO: a difficult case for theory. The ELF and ELI-D topological studies on the chemical bonding using correlated wavefunctions.

    Science.gov (United States)

    Berski, Slawomir; Gordon, Agnieszka J; Latajka, Zdzislaw

    2013-04-01

    The complicated nature of the chemical bonding in cis and trans isomers of F-O-N=O is discussed based on the results obtained from the topological analysis of electron localization function (η) (ELF), electron localizability index (Y(D)(σ)), and electron density (ρ). The calculations have been performed for correlated wavefunctions using the CCSD and CASSCF methods. The F-O1 bond with non-bonding basins, V(F) and V(')(O1), belongs to the protocovalent type (η,Y(D)(σ)) and its total population ranges between 0.2 and 0.4e. The central N-O1 bond in the cis form is protocovalent (η, Y(D)(σ)) with two basins, V(N) and V(O1). The total population oscillates between 0.7 and 0.9e. In the trans isomer, topology of ELF depends on used method. At the CCSD level only one non-bonding basin, V(N), is observed (η). Its population is about 0.5e. According to the definition of a heteronuclear charge-shift (CS) bond, only N-O1 bond in trans-FONO belongs to the CS class. A relation between η- and ρ-topology and N-O1 bond length is discussed.

  13. Synthesis, vibrational and quantum chemical investigations of hydrogen bonded complex betaine dihydrogen selenite

    Science.gov (United States)

    Arjunan, V.; Marchewka, Mariusz K.; Kalaivani, M.

    2012-10-01

    The molecular complex of betaine with selenious acid namely, betaine dihydrogen selenite (C5H13NO5Se, BDHSe) was synthesised by the reaction of betaine and SeO2 in a 1:1:1 solution of isopropanol, methanol and water. Crystals were grown from this solution by cooling to 253 K for few days. The complex was formed without accompanying proton transfer from selenious acid molecule to betaine. The complete vibrational assignments and analysis of BDHSe have been performed by FTIR, FT-Raman and far-infrared spectral studies. More support on the experimental findings was added from the quantum chemical studies performed with DFT (B3LYP) method using 6-311++G∗∗, 6-31G∗∗, cc-pVDZ and 3-21G basis sets. The structural parameters, energies, thermodynamic parameters and the NBO charges of BDHSe were determined by the DFT method. The 1H and 13C isotropic chemical shifts (δ ppm) of BDHSe with respect to TMS were also calculated using the gauge independent atomic orbital (GIAO) method and compared with the experimental data. SHG experiment was carried out using Kurtz-Perry powder technique. The efficiency of second harmonic generation for BDHSe was estimated relatively to KDP: deff = 0.97 deff (KDP).

  14. Research Update: Mechanical properties of metal-organic frameworks – Influence of structure and chemical bonding

    Directory of Open Access Journals (Sweden)

    Wei Li

    2014-12-01

    Full Text Available Metal-organic frameworks (MOFs, a young family of functional materials, have been attracting considerable attention from the chemistry, materials science, and physics communities. In the light of their potential applications in industry and technology, the fundamental mechanical properties of MOFs, which are of critical importance for manufacturing, processing, and performance, need to be addressed and understood. It has been widely accepted that the framework topology, which describes the overall connectivity pattern of the MOF building units, is of vital importance for the mechanical properties. However, recent advances in the area of MOF mechanics reveal that chemistry plays a major role as well. From the viewpoint of materials science, a deep understanding of the influence of chemical effects on MOF mechanics is not only highly desirable for the development of novel functional materials with targeted mechanical response, but also for a better understanding of important properties such as structural flexibility and framework breathing. The present work discusses the intrinsic connection between chemical effects and the mechanical behavior of MOFs through a number of prototypical examples.

  15. Synthesis, vibrational and quantum chemical investigations of hydrogen bonded complex betaine dihydrogen selenite.

    Science.gov (United States)

    Arjunan, V; Marchewka, Mariusz K; Kalaivani, M

    2012-10-01

    The molecular complex of betaine with selenious acid namely, betaine dihydrogen selenite (C(5)H(13)NO(5)Se, BDHSe) was synthesised by the reaction of betaine and SeO(2) in a 1:1:1 solution of isopropanol, methanol and water. Crystals were grown from this solution by cooling to 253 K for few days. The complex was formed without accompanying proton transfer from selenious acid molecule to betaine. The complete vibrational assignments and analysis of BDHSe have been performed by FTIR, FT-Raman and far-infrared spectral studies. More support on the experimental findings was added from the quantum chemical studies performed with DFT (B3LYP) method using 6-311++G(**), 6-31G(**), cc-pVDZ and 3-21G basis sets. The structural parameters, energies, thermodynamic parameters and the NBO charges of BDHSe were determined by the DFT method. The (1)H and (13)C isotropic chemical shifts (δ ppm) of BDHSe with respect to TMS were also calculated using the gauge independent atomic orbital (GIAO) method and compared with the experimental data. SHG experiment was carried out using Kurtz-Perry powder technique. The efficiency of second harmonic generation for BDHSe was estimated relatively to KDP: d(eff)=0.97 d(eff) (KDP).

  16. Finite Size Effects in Chemical Bonding: From Small Clusters to Solids

    DEFF Research Database (Denmark)

    Kleis, Jesper; Greeley, Jeffrey Philip; Romero, N. A.

    2011-01-01

    We address the fundamental question of which size a metallic nano-particle needs to have before its surface chemical properties can be considered to be those of a solid, rather than those of a large molecule. Calculations of adsorption energies for carbon monoxide and oxygen on a series of gold n......). Below that critical size, finite-size effects can be observed, and we show those to be related to variations in the local atomic structure augmented by quantum size effects for the smallest clusters.......We address the fundamental question of which size a metallic nano-particle needs to have before its surface chemical properties can be considered to be those of a solid, rather than those of a large molecule. Calculations of adsorption energies for carbon monoxide and oxygen on a series of gold...... nanoparticles ranging from 13 to 1,415 atoms, or 0.8–3.7 nm, have been made possible by exploiting massively parallel computing on up to 32,768 cores on the Blue Gene/P computer at Argonne National Laboratory. We show that bulk surface properties are obtained for clusters larger than ca. 560 atoms (2.7 nm...

  17. Low-temperature bonding process for the fabrication of hybrid glass-membrane organ-on-a-chip devices

    Science.gov (United States)

    Pocock, Kyall J.; Gao, Xiaofang; Wang, Chenxi; Priest, Craig; Prestidge, Clive A.; Mawatari, Kazuma; Kitamori, Takehiko; Thierry, Benjamin

    2016-10-01

    The integration of microfluidics with living biological systems has paved the way to the exciting concept of "organs-on-a-chip," which aims at the development of advanced in vitro models that replicate the key features of human organs. Glass-based devices have long been utilized in the field of microfluidics but the integration of alternative functional elements within multilayered glass microdevices, such as polymeric membranes, remains a challenge. To this end, we have extended a previously reported approach for the low-temperature bonding of glass devices that enables the integration of a functional polycarbonate porous membrane. The process was initially developed and optimized on specialty low-temperature bonding equipment (μTAS2001, Bondtech, Japan) and subsequently adapted to more widely accessible hot embosser units (EVG520HE Hot Embosser, EVG, Austria). The key aspect of this method is the use of low temperatures compatible with polymeric membranes. Compared to borosilicate glass bonding (650°C) and quartz/fused silica bonding (1050°C) processes, this method maintains the integrity and functionality of the membrane (Tg 150°C for polycarbonate). Leak tests performed showed no damage or loss of integrity of the membrane for up to 150 h, indicating sufficient bond strength for long-term cell culture. A feasibility study confirmed the growth of dense and functional monolayers of Caco-2 cells within 5 days.

  18. Rationalizing structure, stability, and chemical bonding of pure and doped clusters, isolated and solvated multiply charged anions, and solid-state materials

    Science.gov (United States)

    Sergeeva, Alina P.

    Chemistry is the study of materials and the changes that materials undergo. One can tune the properties of the known materials and design the novel materials with desired properties knowing what is responsible for the chemical reactivity, structure, and stability of those materials. The unified chemical bonding theory could address all these questions, but we do not have one available yet. The most accepted general theory of chemical bonding was proposed by Lewis in 1916, though Lewis's theory fails to explain the bonding in materials with delocalized electron density such as sub-nano and nanoclusters, as well as aromatic organic and organometallic molecules. The dissertation presents a set of projects that can be considered the steps towards the development of the unified chemical bonding theory by extending the ideas of Lewis. The dissertation also presents the studies of the properties of multiply charged anions, which tend to undergo Coulomb explosion in the isolated state and release the excess energy stored in them. It is shown how the properties of multiply charged anions can be tuned upon changing the chemical identity of the species or interaction with solvent molecules. Our findings led to the discovery of a new long-lived triply charged anionic species, whose metastability was explained by the existence of a repulsive Coulomb barrier. We also proposed two ways to restore high symmetry of compounds by suppression of the pseudo Jahn-Teller effect, which could lead to the design of new materials with the restored symmetry and therefore the novel properties.

  19. Hybrid opto-chemical doping in Ag nanoparticle-decorated monolayer graphene grown by chemical vapor deposition probed by Raman spectroscopy

    Science.gov (United States)

    Maiti, R.; Haldar, S.; Majumdar, D.; Singha, A.; Ray, S. K.

    2017-02-01

    The novel opto-chemical doping effect in Ag nanoparticle-decorated monolayer graphene grown by chemical vapor deposition has been investigated using Raman spectroscopy for the first time. We used both noble metal nanoparticles and optical excitation, in a hybrid opto-chemical route, to tune the doping level in graphene. Metal nanoparticle-induced chemical effects and laser power-induced substrate effects alter the doping nature of graphene from p- to n-type. Compared with earlier studies, the proposed method significantly lowers the laser intensity required for optical power-dependent doping, resulting in prevention of damage to the sample due to local heating. Some other interesting observations are the enhanced peak intensity in the Raman spectrum of graphene, enhancement of the D-band intensity and the introduction of G-band splitting. This novel, cheap and easily implemented hybrid optical-chemical doping strategy could be very useful for tuning graphene plasmons on the widely used Si/SiO2 substrates for various photonic device applications.

  20. Physio-chemical Investigation and Natural Bond Orbital Analysis of the Most Actives Ingredient of Fennel Plant

    Directory of Open Access Journals (Sweden)

    Mansoureh Pishehabadi

    2016-10-01

    Full Text Available In this study, physio-chemical properties of effective compounds of fennel plant were investigated through using computational chemistry. To do this, trans-anethole, estragole, 3'- hydroxyanethole and 4- methoxycinnamyl alcohol compounds that the most active ingredient combinations make up the fennel plant have been carried out at three different levels of HF, BLYP and B3LYP theories using 6-31G*, 6-311G*, 6-311G**, 6-311+G and 6-311++G basis sets. Additionally, ab initio calculation in the gas phase have been studied and physio-chemical parameters including Gibbs free energy, thermal energy, enthalpy, entropy, and thermal capacity in constant volume (CV of these compounds have been computed as well as Gibbs free energy in polar solvents such as ethanol and methanol and water. Based on these obtained data the structural stabilities of these flavorful compounds have been discussed. However, in these herbal effective compounds presented here the natural bond orbital (NBO analysis has been performed which seemed quite informative to show some important atomic and structural features. The result lead to the issue that all those compounds in polar solvents, particularly alcoholic solvents solved and the compounds can be used sufficiently to extract the active ingredients of herb fennel.

  1. Correlation between topological band character and chemical bonding in a Bi14Rh3I9-based family of insulators

    Science.gov (United States)

    Rasche, Bertold; Isaeva, Anna; Ruck, Michael; Koepernik, Klaus; Richter, Manuel; van den Brink, Jeroen

    2016-02-01

    Recently the presence of topologically protected edge-states in Bi14Rh3I9 was confirmed by scanning tunnelling microscopy consolidating this compound as a weak 3D topological insulator (TI). Here, we present a density-functional-theory-based study on a family of TIs derived from the Bi14Rh3I9 parent structure via substitution of Ru, Pd, Os, Ir and Pt for Rh. Comparative analysis of the band-structures throughout the entire series is done by means of a unified minimalistic tight-binding model that evinces strong similarity between the quantum-spin-Hall (QSH) layer in Bi14Rh3I9 and graphene in terms of -molecular orbitals. Topologically non-trivial energy gaps are found for the Ir-, Rh-, Pt- and Pd-based systems, whereas the Os- and Ru-systems remain trivial. Furthermore, the energy position of the metal -band centre is identified as the parameter which governs the evolution of the topological character of the band structure through the whole family of TIs. The -band position is shown to correlate with the chemical bonding within the QSH layers, thus revealing how the chemical nature of the constituents affects the topological band character.

  2. Surfactant free synthesis of CdS nanospheres, microstructural analysis, chemical bonding, optical properties and photocatalytic activities

    Science.gov (United States)

    Ganesh, R. Sankar; Sharma, Sanjeev K.; Durgadevi, E.; Navaneethan, M.; Binitha, H. S.; Ponnusamy, S.; Muthamizhchelvan, C.; Hayakawa, Y.; Kim, Deuk Young

    2017-04-01

    The surfactant free cadmium sulfide (CdS) nanospheres were synthesized by the chemical method in a single step. The uniform shape of CdS spheres was controlled by the variation of concentration of thioacetamide (C2H5NS). The cubic phase of CdS nanopowder was determined from XRD analysis, which closely matched to the standard card. The spherical grains of CdS powder were confirmed from the microstructural analysis. The concentration of thioacetamide (TAA) played a vital role in the formation of nanospheres. The bandgap of CdS nanospheres decreased from 2.44 to 2.22 eV as the mole concentration of C2H5NS increased from 0.05 M to 2.0 M. FTIR spectra confirmed the presence of the stretching bond of Cdsbnd S. The dominant PL peak of purely and uniformed CdS nanospheres was observed at 528 nm due to S vacancies or surface defects. The prepared photocatalyst demonstrated the superior visible light photocatalytic degradation of methylene blue (MB). The highest degradation (96%) of MB was achieved within 180 min. Therefore, CdS nanospheres grown in the single step by the chemical method has a remarkable enhancement in the degradation of pollutants under irradiation of visible light.

  3. Abnormal development of tapetum and microspores induced by chemical hybridization agent SQ-1 in wheat.

    Directory of Open Access Journals (Sweden)

    Shuping Wang

    Full Text Available Chemical hybridization agent (CHA-induced male sterility is an important tool in crop heterosis. To demonstrate that CHA-SQ-1-induced male sterility is associated with abnormal tapetal and microspore development, the cytology of CHA-SQ-1-treated plant anthers at various developmental stages was studied by light microscopy, scanning and transmission electron microscopy, in situ terminal deoxynucleotidyl transferasemediated dUTP nick end-labelling (TUNEL assay and DAPI staining. The results indicated that the SQ-1-treated plants underwent premature tapetal programmed cell death (PCD, which was initiated at the early-uninucleate stage of microspore development and continued until the tapetal cells were completely degraded; the process of microspore development was then blocked. Microspores with low-viability (fluorescein diacetate staining were aborted. The study suggests that premature tapetal PCD is the main cause of pollen abortion. Furthermore, it determines the starting period and a key factor in CHA-SQ-1-induced male sterility at the cell level, and provides cytological evidence to further study the mechanism between PCD and male sterility.

  4. Entrapping quercetin in silica/polyethylene glycol hybrid materials: Chemical characterization and biocompatibility.

    Science.gov (United States)

    Catauro, Michelina; Bollino, Flavia; Nocera, Paola; Piccolella, Simona; Pacifico, Severina

    2016-11-01

    Sol-gel synthesis was exploited to entrap quercetin, a natural occurring antioxidant polyphenol, in silica-based hybrid materials, which differed in their polyethylene glycol (PEG) content (6, 12, 24 and 50wt%). The materials obtained, whose nano-composite nature was ascertained by Scanning Electron Microscopy (SEM), were chemically characterized by Fourier Transform InfraRed (FT-IR) and UV-Vis spectroscopies. The results prove that a reaction between the polymer and the drug occurred. Bioactivity tests showed their ability to induce hydroxyapatite nucleation on the sample surfaces. The direct contact method was applied to screen the cytotoxicity of the synthetized materials towards fibroblast NIH 3T3 cells, commonly used for in vitro biocompatibility studies, and three nervous system cell lines (neuroblastoma SH-SY5Y, glioma U251, and pheochromocytoma PC12 cell lines), adopted as models in oxidative stress related studies. Using the MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay NIH 3T3 proliferation was assessed and the morphology was not compromised by direct exposure to the materials. Analogously, PC-12, and U-251 cell lines were not affected by new materials. SH-SY5Y appeared to be the most sensitive cell line with cytotoxic effects of 20-35%. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Chemical Reaction of Ultracold Atoms and Ions in a Hybrid Trap

    CERN Document Server

    Rellergert, Wade G; Kotochigova, Svetlana; Petrov, Alexander; Chen, Kuang; Schowalter, Steven J; Hudson, Eric R

    2011-01-01

    Interactions between cold ions and atoms have been proposed for use in implementing quantum gates\\cite{Idziaszek2007}, probing quantum gases\\cite{Sherkunov2009}, observing novel charge-transport dynamics\\cite{Cote2000}, and sympathetically cooling atomic and molecular systems which cannot be laser cooled\\cite{Smith2005,Hudson2009}. Furthermore, the chemistry between cold ions and atoms is foundational to issues in modern astrophysics, including the formation of stars, planets, and interstellar clouds\\cite{Smith1992}, the diffuse interstellar bands\\cite{Reddy2010}, and the post-recombination epoch of the early universe\\cite{Stancil1996b}. However, as pointed out in refs 9 and 10, both experimental data and a theoretical description of the ion-atom interaction at low temperatures, reached in these modern atomic physics experiments and the interstellar environment, are still largely missing. Here we observe a chemical reaction between ultracold $^{174}$Yb$^+$ ions and $^{40}$Ca atoms held in a hybrid trap. We me...

  6. Abnormal development of tapetum and microspores induced by chemical hybridization agent SQ-1 in wheat.

    Science.gov (United States)

    Wang, Shuping; Zhang, Gaisheng; Song, Qilu; Zhang, Yingxin; Li, Zheng; Guo, Jialin; Niu, Na; Ma, Shoucai; Wang, Junwei

    2015-01-01

    Chemical hybridization agent (CHA)-induced male sterility is an important tool in crop heterosis. To demonstrate that CHA-SQ-1-induced male sterility is associated with abnormal tapetal and microspore development, the cytology of CHA-SQ-1-treated plant anthers at various developmental stages was studied by light microscopy, scanning and transmission electron microscopy, in situ terminal deoxynucleotidyl transferasemediated dUTP nick end-labelling (TUNEL) assay and DAPI staining. The results indicated that the SQ-1-treated plants underwent premature tapetal programmed cell death (PCD), which was initiated at the early-uninucleate stage of microspore development and continued until the tapetal cells were completely degraded; the process of microspore development was then blocked. Microspores with low-viability (fluorescein diacetate staining) were aborted. The study suggests that premature tapetal PCD is the main cause of pollen abortion. Furthermore, it determines the starting period and a key factor in CHA-SQ-1-induced male sterility at the cell level, and provides cytological evidence to further study the mechanism between PCD and male sterility.

  7. High-energy, stable and recycled molecular solar thermal storage materials using AZO/graphene hybrids by optimizing hydrogen bonds

    Science.gov (United States)

    Luo, Wen; Feng, Yiyu; Qin, Chengqun; Li, Man; Li, Shipei; Cao, Chen; Long, Peng; Liu, Enzuo; Hu, Wenping; Yoshino, Katsumi; Feng, Wei

    2015-10-01

    An important method for establishing a high-energy, stable and recycled molecular solar heat system is by designing and preparing novel photo-isomerizable molecules with a high enthalpy and a long thermal life by controlling molecular interactions. A meta- and ortho-bis-substituted azobenzene chromophore (AZO) is covalently grafted onto reduced graphene oxide (RGO) for solar thermal storage materials. High grafting degree and close-packed molecules enable intermolecular hydrogen bonds (H-bonds) for both trans-(E) and cis-(Z) isomers of AZO on the surface of nanosheets, resulting in a dramatic increase in enthalpy and lifetime. The metastable Z-form of AZO on RGO is thermally stabilized with a half-life of 52 days by steric hindrance and intermolecular H-bonds calculated using density functional theory (DFT). The AZO-RGO fuel shows a high storage capacity of 138 Wh kg-1 by optimizing intermolecular H-bonds with a good cycling stability for 50 cycles induced by visible light at 520 nm. Our work opens up a new method for making advanced molecular solar thermal storage materials by tuning molecular interactions on a nano-template.An important method for establishing a high-energy, stable and recycled molecular solar heat system is by designing and preparing novel photo-isomerizable molecules with a high enthalpy and a long thermal life by controlling molecular interactions. A meta- and ortho-bis-substituted azobenzene chromophore (AZO) is covalently grafted onto reduced graphene oxide (RGO) for solar thermal storage materials. High grafting degree and close-packed molecules enable intermolecular hydrogen bonds (H-bonds) for both trans-(E) and cis-(Z) isomers of AZO on the surface of nanosheets, resulting in a dramatic increase in enthalpy and lifetime. The metastable Z-form of AZO on RGO is thermally stabilized with a half-life of 52 days by steric hindrance and intermolecular H-bonds calculated using density functional theory (DFT). The AZO-RGO fuel shows a high

  8. Enhanced photocatalytic activity of Ag–ZnO hybrid plasmonic nanostructures prepared by a facile wet chemical method

    Directory of Open Access Journals (Sweden)

    Sini Kuriakose

    2014-05-01

    Full Text Available We report the synthesis of Ag–ZnO hybrid plasmonic nanostructures with enhanced photocatalytic activity by a facile wet-chemical method. The structural, optical, plasmonic and photocatalytic properties of the Ag–ZnO hybrid nanostructures were studied by X-ray diffraction (XRD, field emission scanning electron microscopy (FESEM, transmission electron microscopy (TEM, photoluminescence (PL and UV–visible absorption spectroscopy. The effects of citrate concentration and Ag nanoparticle loading on the photocatalytic activity of Ag–ZnO hybrid nanostructures towards sun-light driven degradation of methylene blue (MB have been investigated. Increase in citrate concentration has been found to result in the formation of nanodisk-like structures, due to citrate-assisted oriented attachment of ZnO nanoparticles. The decoration of ZnO nanostructures with Ag nanoparticles resulted in a significant enhancement of the photocatalytic degradation efficiency, which has been found to increase with the extent of Ag nanoparticle loading.

  9. Anaerobic treatment of a chemical synthesis-based pharmaceutical wastewater in a hybrid upflow anaerobic sludge blanket reactor.

    Science.gov (United States)

    Oktem, Yalcin Askin; Ince, Orhan; Sallis, Paul; Donnelly, Tom; Ince, Bahar Kasapgil

    2008-03-01

    In this study, performance of a lab-scale hybrid up-flow anaerobic sludge blanket (UASB) reactor, treating a chemical synthesis-based pharmaceutical wastewater, was evaluated under different operating conditions. This study consisted of two experimental stages: first, acclimation to the pharmaceutical wastewater and second, determination of maximum loading capacity of the hybrid UASB reactor. Initially, the carbon source in the reactor feed came entirely from glucose, applied at an organic loading rate (OLR) 1 kg COD/m(3) d. The OLR was gradually step increased to 3 kg COD/m(3) d at which point the feed to the hybrid UASB reactor was progressively modified by introducing the pharmaceutical wastewater in blends with glucose, so that the wastewater contributed approximately 10%, 30%, 70%, and ultimately, 100% of the carbon (COD) to be treated. At the acclimation OLR of 3 kg COD/m(3) d the hydraulic retention time (HRT) was 2 days. During this period of feed modification, the COD removal efficiencies of the anaerobic reactor were 99%, 96%, 91% and 85%, and specific methanogenic activities (SMA) were measured as 240, 230, 205 and 231 ml CH(4)/g TVS d, respectively. Following the acclimation period, the hybrid UASB reactor was fed with 100% (w/v) pharmaceutical wastewater up to an OLR of 9 kg COD/m(3) d in order to determine the maximum loading capacity achievable before reactor failure. At this OLR, the COD removal efficiency was 28%, and the SMA was measured as 170 ml CH(4)/g TVS d. The hybrid UASB reactor was found to be far more effective at an OLR of 8 kg COD/m(3) d with a COD removal efficiency of 72%. At this point, SMA value was 200 ml CH(4)/g TVS d. It was concluded that the hybrid UASB reactor could be a suitable alternative for the treatment of chemical synthesis-based pharmaceutical wastewater.

  10. Synthesis of advanced chemically bonded ceramics for solidification of radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Seneda, Jose A.; Dellamano, Jose C.; Queiroz, Carlos A.S.; Genova, Luis A.; Rocha, Soraya M.R. da; Vicente, Roberto, E-mail: jaseneda@ipen.b, E-mail: jcdellam@ipen.b, E-mail: cqueiroz@ipen.b, E-mail: lgenova@ipen.b, E-mail: smrrocha@ipen.b, E-mail: rvicente@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    This paper presents the results of a preliminary study on the synthesis of advanced chemically bounded ceramics for use to immobilize radioactive wastes. A monolithic, crystalline, ceramic-like material, in the form of MgKPO{sub 4}.6H{sub 2}O, is obtained by reaction of magnesium oxide with potassium monophosphate, at room temperature. The thermodynamics of the reaction indicates the need of a previous treatment of the MgO above 1200 deg C to avoid the formation of magnesium phosphate salts, as revealed by thermogravimetric analysis and X-ray diffraction. The different crystalline phases and microstructure of reaction products are analyzed by X-ray diffraction and scanning electron microscopy, indicating that the material has the characteristics of a matrix for immobilization of radioactive waste. Results obtained thus far indicate the possibility of using this material to replace Portland cement in waste immobilization, offsetting the higher cost of raw material input with a larger fraction of waste in the waste form. More research on characterization of the waste form with mechanical strength tests of specimens incorporating varying waste compositions, and on the leaching potential of the material for a series of radioactive as well hazardous industrial wastes is being planned. (author)

  11. Chemical detection with nano/bio hybrid devices based on carbon nanotubes and graphene

    Science.gov (United States)

    Lerner, Mitchell Bryant

    Carbon nanotube field-effect transistors (NT-FETs) and graphene field effect transistors (GFETs) provide a unique transduction platform for chemical and biomolecular detection. The work presented in this thesis describes the fabrication, characterization, and investigation of operational mechanisms of carbon-based biosensors. In the first set of experiments, we used carbon nanotubes as fast, all-electronic readout elements in novel vapor sensors, suitable for applications in environmental monitoring and medicine. Molecules bound to the hybrid alter the electrical properties of the NT-FET via several mechanisms, allowing direct detection as a change in the transistor conduction properties. Vapor sensors suitable for more complex system architectures characteristic of mammalian olfaction were demonstrated using NT-FETs functionalized with mouse olfactory receptor (mOR) proteins or single stranded DNA (ssDNA). Substitution of graphene as the channel material enabled production of hundreds of electronically similar devices with high yield. Etching large scale chemical vapor deposition (CVD)-grown graphene into small channels is itself a challenging problem, and we have developed novel fabrication methods to this end without sacrificing the inherent electrical quality that makes graphene such an attractive material. Large arrays of such devices have potential utility for understanding the physics of ligand-receptor interactions and contributing to the development of a new generation of devices for electronic olfaction. Tailored and specific detection was accomplished by chemically functionalizing the NT-FET or GFET with biomolecules, such as proteins or small molecules, to create a hybrid nanostructures. Targets for detection were widely varied, indicating the utility of these techniques, such as 1) live Salmonella cells in nutrient broth, 2) a biomarker protein indicative of prostate cancer, 3) antigen protein from the bacterium that causes Lyme disease, and 4) glucose

  12. Chemical, Colour and Strength Changes of Eco-friendly Hot Oil Treatment on 15 Year-old Cultivated Acacia Hybrid

    Directory of Open Access Journals (Sweden)

    Razak Wahab

    2013-01-01

    Full Text Available The chemical, colour and strength properties of thermally modified cultivated 15-year-old Acacia hybrid were investigated. Logs of A. hybrid were harvested and cut at the bottom, middle and top sections. The wood later underwent hot oilthermal modification using palm oil at temperatures 180°C, 200°C and 220°C for 30, 60 and 90 min. Untreated wood was used as control. The hot oil thermal modification process caused some features changed in the chemical composition, colour appearances and strength properties of A. hybrid wood. Parameters such as temperatures and treatment time were closely monitored as they influence the chemical, colour and strength changes in the treated wood. Temperatures of 180°C, 200°C and 220°C, and treatment time of 1 hr, 2 hrs. and 3 hrs. were used in the study. The degradation in holocellulose, cellulose, and hemicellulose contents was recognized when acacia woods were exposed to oil thermally modified process. Holocellulose and celulose degraded with the increasing of treatment temperature and duration of heating exposure, while lignin showed the increment in content through this treatment. The colour changes in the sapwood and heartwood were measured using the Minolta Chroma-meter CR-310 and the results are presented according to the CIE L*a*b* colour co-ordinates system. The results show that temperature at certain treatment time enhanced and darkened the treated wood. The colour of the treated sapwood can be enhanced to match the colour of the natural A. hybrid heartwood. The strength properties of the oil heat treated A. hybrid wood decreases in values of both MOR and MOE throughout thetreatment process. The decreases in values were influenced by temperature and duration of the treatment.

  13. High-energy, stable and recycled molecular solar thermal storage materials using AZO/graphene hybrids by optimizing hydrogen bonds.

    Science.gov (United States)

    Luo, Wen; Feng, Yiyu; Qin, Chengqun; Li, Man; Li, Shipei; Cao, Chen; Long, Peng; Liu, Enzuo; Hu, Wenping; Yoshino, Katsumi; Feng, Wei

    2015-10-21

    An important method for establishing a high-energy, stable and recycled molecular solar heat system is by designing and preparing novel photo-isomerizable molecules with a high enthalpy and a long thermal life by controlling molecular interactions. A meta- and ortho-bis-substituted azobenzene chromophore (AZO) is covalently grafted onto reduced graphene oxide (RGO) for solar thermal storage materials. High grafting degree and close-packed molecules enable intermolecular hydrogen bonds (H-bonds) for both trans-(E) and cis-(Z) isomers of AZO on the surface of nanosheets, resulting in a dramatic increase in enthalpy and lifetime. The metastable Z-form of AZO on RGO is thermally stabilized with a half-life of 52 days by steric hindrance and intermolecular H-bonds calculated using density functional theory (DFT). The AZO-RGO fuel shows a high storage capacity of 138 Wh kg(-1) by optimizing intermolecular H-bonds with a good cycling stability for 50 cycles induced by visible light at 520 nm. Our work opens up a new method for making advanced molecular solar thermal storage materials by tuning molecular interactions on a nano-template.

  14. Photofunctional hybrids of rare earth complexes covalently bonded to ZnO core-shell nanoparticle substrate through polymer linkage.

    Science.gov (United States)

    Shao, Yan-Fei; Yan, Bing

    2012-06-28

    A novel series of multi-component hybrids are assembled based on rare earth coordinated to rare earth ion (Eu(3+), Tb(3+), Sm(3+), Dy(3+)) complex systems and ZnO nanocomposites through three different ester units (ethyl methacrylate (EMA), 2-hydroxyethyl methacrylate (HEMA) and 2,2,3,4,4,4-hexafluorobutyl methacrylate (HFMA)) as functional polymer linkages. Methacrylic-group-modified ZnO nanoparticles (designated ZnO-MAA) are synthesized based on the reaction between zinc methacrylate and LiOH with the molar ratio 1 : 3.5 via sol-gel process. The final hybrid materials are prepared by introducing rare earth complexes into ZnO-MAA matrix via addition polymerization reaction in the presence of benzoyl peroxide (BPO) as the initiator. The detailed characterization and luminescence of these hybrid materials are discussed. It is found that ZnO-MAA-HEMA/EMA/HFBMA-RE-phen hybrid systems have effective intramolecular energy transfer process and exhibit longer lifetime and higher quantum efficiency.

  15. Evolution of chemical bonding and electron density rearrangements during D(3h) → D(3d) reaction in monolayered TiS2: a QTAIM and ELF study.

    Science.gov (United States)

    Ryzhikov, Maxim R; Slepkov, Vladimir A; Kozlova, Svetlana G; Gabuda, Svyatoslav P

    2014-08-15

    Monolayered titanium disulfide TiS2, a prospective nanoelectronic material, was previously shown to be subject to an exothermic solid-state D3h -D3d reaction that proceeds via a newly discovered transition state. Here, we study the reaction in detail using topological methods of quantum chemistry (quantum theory of atoms in molecules and electron localization function analysis) and show how electron density and chemical bonding between the atoms change in the course of the reaction. The reaction is shown to undergo a series of topological catastrophes, associated with elementary chemical events such as break and formation of bonds (including the unexpected formation of S-S bonding between sulfur layers), and rearrangement of electron density of outer valence and core shells.

  16. Bond-length analysis of the omega structure in Ti,Zr,Hf and their alloys: experimental data, new correlations and implications for chemical bonding models

    Energy Technology Data Exchange (ETDEWEB)

    Grad, G.B.; Benites, G.M. [Comision Nacional de Energia Atomica, San Carlos de Bariloche (Argentina). Centro Atomico Bariloche; Aurelio, G. [Departamento de Fisica, Universidad del Comahue, 8300, Neuquen (Argentina); Fernandez Guillermet, A. [Centro Atomico Bariloche, 8400, San Carlos de Bariloche (Argentina)

    1999-12-15

    An analysis is performed of the experimental information on the key interatomic distances (IDs) of the AlB{sub 2} type structure, the so-called omega ({omega}) phase in Ti and Zr, as well as in Ti-V and Zr-Nb alloys. Various remarkable correlations are found between these IDs and standard measures of the atomic size, and with Pauling's bond-lengths. These observations are discussed in the light of the phenomenological bonding pictures of the {omega} structure, and with our recent ab initio calculations of the electronic structure of this phase. (orig.)

  17. The Effects of Reasoning, Use of Models, Sex Type, and Their Interactions on Posttest Achievement in Chemical Bonding after Constant Instruction.

    Science.gov (United States)

    Staver, John R.; Halsted, Douglas A.

    1985-01-01

    Determined the effects of reasoning, use of models during testing, and sex type on posttest achievement in chemical bonding under controlled instruction. Indicates that chemistry students' (N=84) reasoning capabilities influenced performance; other variables were not significant. Other conclusions are noted and discussed. (DH)

  18. Survival of bonded lingual retainers with chemical or photo polymerization over a 2-year period: a single-center, randomized controlled clinical trial

    NARCIS (Netherlands)

    Pandis, N.; Fleming, P.S.; Kloukos, D.; Polychronopoulou, A.; Katsaros, C.; Eliades, T.

    2013-01-01

    INTRODUCTION: The objective of this trial was to compare the survival rates of mandibular lingual retainers bonded with either chemically cured or light-cured adhesive after orthodontic treatment. METHODS: Patients having undergone orthodontic treatment at a private orthodontic office were randomly

  19. Nanostructured Fiber Optic Cantilever Arrays and Hybrid MEMS Sensors for Chemical and Biological Detection Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advancements in nano-/micro-scale sensor fabrication and molecular recognition surfaces offer promising opportunities to develop miniaturized hybrid fiber optic and...

  20. Growth of thick MgB{sub 2} films by impinging-jet hybrid physical-chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lamborn, D.R. [Department of Chemical Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Wilke, R.H.T.; Li, Q. [Department of Physics, The Pennsylvania State University, University Park, PA 16802 (United States); Xi, X. [Department of Physics, Department of Materials Science and Engineering, Materials Research Institute, The Pennsylvania State University, University Park, PA 16801 (United States); Snyder, D.W. [Applied Research Laboratory, The Pennsylvania State University, University Park, PA 16802 (United States); Redwing, J.M. [Department of Materials Science and Engineering, Materials Research Institute, The Pennsylvania State University, University Park, PA 16801 (United States)

    2008-01-18

    Thick MgB{sub 2} films are grown using a novel impinging-jet hybrid physical-chemical vapor deposition process. An increased amount of the boron source gas generates high growth rates. Superconducting properties of the thick films are comparable to previous results from other processes, which indicate that this is a promising new process for MgB{sub 2} deposition for coated conductor applications, such as wires and tapes for MRI magnets. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

  1. CSP-based chemical kinetics mechanisms simplification strategy for non-premixed combustion: An application to hybrid rocket propulsion

    KAUST Repository

    Ciottoli, Pietro P.

    2017-08-14

    A set of simplified chemical kinetics mechanisms for hybrid rocket applications using gaseous oxygen (GOX) and hydroxyl-terminated polybutadiene (HTPB) is proposed. The starting point is a 561-species, 2538-reactions, detailed chemical kinetics mechanism for hydrocarbon combustion. This mechanism is used for predictions of the oxidation of butadiene, the primary HTPB pyrolysis product. A Computational Singular Perturbation (CSP) based simplification strategy for non-premixed combustion is proposed. The simplification algorithm is fed with the steady-solutions of classical flamelet equations, these being representative of the non-premixed nature of the combustion processes characterizing a hybrid rocket combustion chamber. The adopted flamelet steady-state solutions are obtained employing pure butadiene and gaseous oxygen as fuel and oxidizer boundary conditions, respectively, for a range of imposed values of strain rate and background pressure. Three simplified chemical mechanisms, each comprising less than 20 species, are obtained for three different pressure values, 3, 17, and 36 bar, selected in accordance with an experimental test campaign of lab-scale hybrid rocket static firings. Finally, a comprehensive strategy is shown to provide simplified mechanisms capable of reproducing the main flame features in the whole pressure range considered.

  2. Enhancement of Thermoelectric Properties of PEDOT:PSS and Tellurium-PEDOT:PSS Hybrid Composites by Simple Chemical Treatment

    Science.gov (United States)

    Jin Bae, Eun; Hun Kang, Young; Jang, Kwang-Suk; Yun Cho, Song

    2016-01-01

    The thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and tellurium-PEDOT:PSS (Te-PEDOT:PSS) hybrid composites were enhanced via simple chemical treatment. The performance of thermoelectric materials is determined by their electrical conductivity, thermal conductivity, and Seebeck coefficient. Significant enhancement of the electrical conductivity of PEDOT:PSS and Te-PEDOT:PSS hybrid composites from 787.99 and 11.01 to 4839.92 and 334.68 S cm-1, respectively was achieved by simple chemical treatment with H2SO4. The power factor of the developed materials could be effectively tuned over a very wide range depending on the concentration of the H2SO4 solution used in the chemical treatment. The power factors of the developed thermoelectric materials were optimized to 51.85 and 284 μW m-1 K-2, respectively, which represent an increase of four orders of magnitude relative to the corresponding parameters of the untreated thermoelectric materials. Using the Te-PEDOT:PSS hybrid composites, a flexible thermoelectric generator that could be embedded in textiles was fabricated by a printing process. This thermoelectric array generates a thermoelectric voltage of 2 mV using human body heat.

  3. A New Optimum Frequency Controller of Hybrid Pumping System: Bond Graph Modeling-Simulation and Practice with ARDUINO Board

    OpenAIRE

    MEZGHANI Dhafer; OTHMANI Hichem; SASSI Fares; Mami, Abdelkader; Dauphin-Tanguy, Geneviève

    2017-01-01

    The strategy of rural development in Tunisia needs to include as one of its priorities: the control of water. In seeking solutions for the energy control dedicated to pumping, it seems interesting to know the benefits of a new technique based on the complementarities of two renewable energy sources such as solar and wind power. The climate’s dependence requires a complex modelling and more optimization methods for controlling of hybrid system. Moreover, in recent years, technological progress...

  4. Influence of MgO and Hybrid Fiber on the Bonding Strength between Reactive Powder Concrete and Old Concrete

    Directory of Open Access Journals (Sweden)

    Mo Jinchuan

    2016-01-01

    Full Text Available The reactive powder concrete (RPC was used as concrete repair material in this paper. The influence of steel fiber, steel fiber + MgO, and steel fiber + MgO + polypropylene fiber (PPF on the mechanical properties of RPC repair materials and the splitting tensile strength between RPC and old concrete was studied. Influences of steel fiber, MgO, and PPF on the splitting tensile strength were further examined by using scanning electronic microscopy (SEM and drying shrinkage test. Results indicated that the compressive and flexural strength was improved with the increasing of steel fiber volume fraction. However, the bonding strength showed a trend from rise to decline with the increasing of steel fiber volume fraction. Although MgO caused mechanical performance degradation of RPC, it improved bonding strength between RPC and existing concrete. The influence of PPF on the mechanical properties of RPC was not obvious, whereas it further improved bonding strength by significantly reducing the early age shrinkage of RPC. Finally, the relationship of drying shrinkage and splitting tensile strength was studied, and the equation between the splitting tensile strength relative index and logarithm of drying shrinkage was obtained by function fitting.

  5. Evaluation of the flocculation performance of carboxymethyl chitosan-graft-polyacrylamide, a novel amphoteric chemically bonded composite flocculant.

    Science.gov (United States)

    Yang, Zhen; Yuan, Bo; Huang, Xin; Zhou, Junyu; Cai, Jun; Yang, Hu; Li, Aimin; Cheng, Rongshi

    2012-01-01

    In the present work, a novel amphoteric chemically bonded composite flocculant (carboxymethyl chitosan-graft-polyacrylamide, denoted as CMC-g-PAM) was successfully prepared and used to flocculate the kaolin suspension. The flocculation performance of CMC-g-PAM in acidic, neutral, and alkaline conditions was systematically evaluated by light scattering in combination with fractal theory, as well as by traditional turbidity and zeta potential measurements. Based on the experimental facts from in situ size and fractal dimension measurements, different flocculation mechanisms play key roles at various pH levels, resulting in substantially varied flocculation kinetic processes under three pH conditions. In acidic condition, patching was the main mechanism involved in the opposite zeta potential between CMC-g-PAM and the kaolin suspension. A flat configuration was favored when the polymeric flocculant was adsorbed onto the particle surface, leading to a slower initial floc growth rate but larger and denser flocs. Bridging was the dominant mechanism in neutral and alkaline conditions. A faster initial rate of bridging resulted in smaller and more open floc structures. A rearrangement process in neutral pH subsequently led to more compact flocs, whereas no restructuration of flocs occurred in alkaline conditions because of the electrostatic repulsion of the same negative charges on the flocculant and particles.

  6. Simple fabrication of hydrophilic nanochannels using the chemical bonding between activated ultrathin PDMS layer and cover glass by oxygen plasma.

    Science.gov (United States)

    Kim, So Hyun; Cui, Yidan; Lee, Min Jung; Nam, Seong-Won; Oh, Doori; Kang, Seong Ho; Kim, Youn Sang; Park, Sungsu

    2011-01-21

    This study describes a simple and low cost method for fabricating enclosed transparent hydrophilic nanochannels by coating low-viscosity PDMS (monoglycidyl ether-terminated polydimethylsiloxane) as an adhesion layer onto the surface of the nanotrenches that are molded with a urethane-based UV-curable polymer, Norland Optical Adhesive (NOA 63). In detail, the nanotrenches made of NOA 63 were replicated from a Si master mold and coated with 6 nm thick layer of PDMS. These nanotrenches underwent an oxygen plasma treatment and finally were bound to a cover glass by chemical bonding between silanol and hydroxyl groups. Hydrophobic recovery that is observed in the bulk PDMS was not observed in the thin film of PDMS on the mold and the PDMS-coated nanochannel maintained its surface hydrophilicity for at least one month. The potentials of the nanochannels for bioapplications were demonstrated by stretching λ-DNA (48,502 bp) in the channels. Therefore, this fabrication approach provides a practical solution for the simple fabrication of the nanochannels for bioapplications.

  7. Diversity of Chemical Bonding and Oxidation States in MS 4 Molecules of Group 8 Elements

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Wei [Department of Chemistry and Key Laboratory of Organic Optoelectronics & Molecular Engineering of the Ministry of Education, Tsinghua University, Beijing 100084 P.R. China; Jiang, Ning [Department of Chemistry and Key Laboratory of Organic Optoelectronics & Molecular Engineering of the Ministry of Education, Tsinghua University, Beijing 100084 P.R. China; Schwarz, W. H. Eugen [Department of Chemistry and Key Laboratory of Organic Optoelectronics & Molecular Engineering of the Ministry of Education, Tsinghua University, Beijing 100084 P.R. China; Physical and Theoretical Chemistry, University of Siegen, Siegen 57068 Germany; Yang, Ping [Theoretical Division, Los Alamos National Laboratory, Los Alamos New Mexico 87545 USA; Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory, Richland Washington 953002 USA; Li, Jun [Department of Chemistry and Key Laboratory of Organic Optoelectronics & Molecular Engineering of the Ministry of Education, Tsinghua University, Beijing 100084 P.R. China; Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory, Richland Washington 953002 USA

    2017-07-11

    The geometric and electronic ground-state structures of six MS4 molecules (M = group-8 metals Fe, Ru, Os, Hs, Sm, and Pu) have been studied by using quantum-chemical density-functional and correlated wave-function approaches. The MS4 species are compared to analogous MO4 species recently investi-gated (Inorg. Chem. 2016, 55: 4616). Metal oxidation state (MOS) of high value VIII appears in low- spin singlet Td geometric species (Os,Hs)S4 and (Ru,Os,Hs)O4, whereas low MOS=II appears in high- spin septet D2d species Fe(S2)2 and (slightly excited) metastable Fe(O2)2. The ground states of all other molecules have intermediate MOS values, containing S2-, S22-, S21- (and resp. O2--, O1-, O22-, O21-) ligands, bonded by ionic, covalent and correlative contributions.

  8. Effects of lithium doping on microstructure, electrical properties, and chemical bonds of sol-gel derived NKN thin films

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Chun-Cheng [Department of Electrical Engineering, National Cheng Kung University, Tainan 701, Taiwan (China); Department of Mathematic and Physical Sciences, R.O.C. Air Force Academy, Kaohsiung 820, Taiwan (China); Chen, Chan-Ching; Weng, Chung-Ming [Department of Electrical Engineering, National Cheng Kung University, Tainan 701, Taiwan (China); Chu, Sheng-Yuan, E-mail: chusy@mail.ncku.edu.tw [Department of Electrical Engineering, National Cheng Kung University, Tainan 701, Taiwan (China); Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); Hong, Cheng-Shong [Department of Electronic Engineering, National Kaohsiung Normal University, Kaohsiung 802, Taiwan (China); Tsai, Cheng-Che [Department of Digital Game and Animation Design, Tung-Fang Design University, Kaohsiung 829, Taiwan (China)

    2015-02-28

    Highly (100/110) oriented lead-free Li{sub x}(Na{sub 0.5}K{sub 0.5}){sub 1−x}NbO{sub 3} (LNKN, x = 0, 0.02, 0.04, and 0.06) thin films are fabricated on Pt/Ti/SiO{sub 2}/Si substrates via a sol-gel processing method. The lithium (Li) dopants modify the microstructure and chemical bonds of the LNKN films, and therefore improve their electrical properties. The optimal values of the remnant polarization (P{sub r} = 14.3 μC/cm{sup 2}), piezoelectric coefficient (d{sub 33} = 48.1 pm/V), and leakage current (<10{sup −5} A/cm{sup 2}) are obtained for a lithium addition of x = 0.04 (i.e., 4 at. %). The observation results suggest that the superior electrical properties are the result of an improved crystallization, a larger grain size, and a smoother surface morphology. It is shown that the ion transport mechanism is dominated by an Ohmic behavior under low electric fields and the Poole-Frenkel emission effect under high electric fields.

  9. Structures and chemical bonding of B3O3 (-/0) and B3O3H(-/0): A combined photoelectron spectroscopy and first-principles theory study.

    Science.gov (United States)

    Zhao, Li-Juan; Tian, Wen-Juan; Ou, Ting; Xu, Hong-Guang; Feng, Gang; Xu, Xi-Ling; Zhai, Hua-Jin; Li, Si-Dian; Zheng, Wei-Jun

    2016-03-28

    We present a combined photoelectron spectroscopy and first-principles theory study on the structural and electronic properties and chemical bonding of B3O3 (-/0) and B3O3H(-/0) clusters. The concerted experimental and theoretical data show that the global-minimum structures of B3O3 and B3O3H neutrals are very different from those of their anionic counterparts. The B3O3 (-) anion is characterized to possess a V-shaped OB-B-BO chain with overall C2 v symmetry (1A), in which the central B atom interacts with two equivalent boronyl (B≡O) terminals via B-B single bonds as well as with one O atom via a B=O double bond. The B3O3H(-) anion has a Cs (2A) structure, containing an asymmetric OB-B-OBO zig-zag chain and a terminal H atom interacting with the central B atom. In contrast, the C2 v (1a) global minimum of B3O3 neutral contains a rhombic B2O2 ring with one B atom bonded to a BO terminal and that of neutral B3O3H (2a) is also of C2 v symmetry, which is readily constructed from C2 v (1a) by attaching a H atom to the opposite side of the BO group. The H atom in B3O3H(-/0) (2A and 2a) prefers to interact terminally with a B atom, rather than with O. Chemical bonding analyses reveal a three-center four-electron (3c-4e) π hyperbond in the B3O3H(-) (2A) cluster and a four-center four-electron (4c-4e) π bond (that is, the so-called o-bond) in B3O3 (1a) and B3O3H (2a) neutral clusters.

  10. Application of the linear/exponential hybrid force field scaling scheme to the bond length alternation modes of polyacetylene

    Science.gov (United States)

    Yang, Shujiang; Kertesz, Miklos

    2006-12-01

    The two bond length alternation related backbone carbon-carbon stretching Raman active normal modes of polyacetylene are notoriously difficulty to predict theoretically. We apply our new linear/exponential scaled quantum mechanical force field scheme to tackle this problem by exponentially adjusting the decay of the coupling force constants between backbone stretchings based on their distance which extends over many neighbors. With transferable scaling parameters optimized by least squares fitting to the experimental vibrational frequencies of short oligoenes, the scaled frequencies of trans-polyacetylene and its isotopic analogs agree very well with experiments. The linear/exponential scaling scheme is also applicable to the cis-polyacetylene case.

  11. Chemical Composition and Biological Activity of Essential Oils from Four Nepeta Species and Hybrids against Aedes aegypti (L. (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Abbas Ali

    2015-08-01

    Full Text Available Essential oils of four ornamental species and hybrids of Nepeta: N. racemosa Lam. hybrid ‘Select’, N. sibirica L., N. subsessilis Maxim, and N.×faassenii Bergmans ex Stearn ‘Dropmore were studied for their chemical composition, larvicidal and biting deterrent activity. Water-distilled essential oils from aerial parts of Nepeta species were analyzed by gas chromatography (GC-FID and gas chromatography mass spectrometry (GC-MS. Nepeta racemosa hybrid ‘Select’ and N. ×faassenii ‘Dropmore’ essential oils were rich in 1,8-cineole whereas N. sibirica and N. subsessilis essential oils mainly consisted of sesquiterpenes: (Z- b -farnesene, b -bisabolene, d -cadinene or b -caryophyllene, and caryophyllene oxide. Many Nepeta species essential oils are reported to be rich in nepetalactone isomers, but essential oils from these species contained either very low or no nepetalactone content. In biting deterrent bioassays, essential oils of these Nepeta species and hybrids at 100 µg/cm 2 showed activity similar to DEET at 25 nmol/cm 2 against Aedes aegypti, whereas this activity at the concentration of 10 µg/cm 2 was lower than DEET. All the essential oils showed weak larvicidal activity and mortalities were observed only at highest dose of 125 ppm against Ae. aegypti.

  12. Covalent Bonding of Metal-Organic Framework-5/Graphene Oxide Hybrid Composite to Stainless Steel Fiber for Solid-Phase Microextraction of Triazole Fungicides from Fruit and Vegetable Samples.

    Science.gov (United States)

    Zhang, Shuaihua; Yang, Qian; Wang, Wenchang; Wang, Chun; Wang, Zhi

    2016-04-06

    A hybrid material of the zinc-based metal-organic framework-5 and graphene oxide (metal-organic framework-5/graphene oxide) was prepared as a novel fiber coating material for solid-phase microextraction (SPME). The SPME fibers were fabricated by covalent bonding via chemical cross-linking between the coating material metal-organic framework-5/graphene oxide and stainless steel wire. The prepared fiber was used for the extraction of five triazole fungicides from fruit and vegetable samples. Gas chromatography coupled with microelectron capture detector (GC-μECD) was used for quantification. The developed method gave a low limit of detection (0.05-1.58 ng g(-1)) and good linearity (0.17-100 ng g(-1)) for the determination of the triazole fungicides in fruit and vegetable samples. The relative standard deviations (RSDs) for five replicate extractions of the triazole fungicides ranged from 3.7 to 8.9%. The method recoveries for spiked fungicides (5, 20, and 50 ng g(-1)) in grape, apple, cucumber, celery cabbage, pear, cabbage, and tomato samples were in the range of 85.6-105.8% with the RSDs ranging from 3.6 to 11.4%, respectively, depending on both the analytes and samples. The metal-organic framework-5/graphene oxide coated fiber was stable enough for 120 extraction cycles without a significant loss of extraction efficiency. The method was suitable for the determination of triazole fungicides in fruit and vegetable samples.

  13. Nanostructured Silica/Gold-Cellulose-Bonded Amino-POSS Hybrid Composite via Sol-Gel Process and Its Properties

    Science.gov (United States)

    Ramesh, Sivalingam; Kim, Heung Soo; Lee, Young-June; Hong, Gwang-Wook; Kim, Joo-Hyung

    2017-06-01

    It is demonstrated in this paper that silica nanoparticles coated with core/shell gold provide efficient thermal, optical, and morphological properties with respect to the cellulose-polyhedral oligomeric silsesquioxanes (POSS) hybrid system. The one-step synthesis of a silica/gold nanocomposite is achieved with a simultaneous hydrolysis and reduction of gold chloride in the presence of formic acid, and the trimethoxysilane group acts as a silica precursor. The focus here comprises the synthesis of cellulose-POSS and silica/gold hybrid nanocomposites using the following two methods: (1) an in situ sol-gel process and (2) a polyvinyl alcohol/tetrakis (hydroxymethyl)phosphonium chloride process. Accordingly, the silica/gold core/shell nanoparticles are synthesized. The growth and attachment of the gold nanoparticles onto the functionalized surface of the silica at the nanometer scale is achieved via both the sol-gel and the tetrakis (hydroxymethyl) phosphonium chloride processes. The cellulose-POSS-silica/gold nanocomposites are characterized according to Fourier transformed infrared spectroscopy, Raman, X-ray diffraction, UV, photoluminescence, SEM, energy-dispersive X-ray spectroscopy, TEM, thermogravimetric, and Brunauer-Emmett-Teller analyses.

  14. Density functional theory investigation of hydrogen bonding effects on the oxygen, nitrogen and hydrogen electric field gradient and chemical shielding tensors of anhydrous chitosan crystalline structure.

    Science.gov (United States)

    Esrafili, Mehdi D; Elmi, Fatemeh; Hadipour, Nasser L

    2007-02-08

    A systematic computational investigation was carried out to characterize the 17O, 14N and 2H electric field gradient, EFG, as well as 17O, 15N, 13C and 1H chemical shielding tensors in the anhydrous chitosan crystalline structure. To include the hydrogen-bonding effects in the calculations, the most probable interacting molecules with the target molecule in the crystalline phase were considered through a hexameric cluster. The computations were performed with the B3LYP method and 6-311++G(d,p) and 6-31++G(d,p) standard basis sets using the Gaussian 98 suite of programs. Calculated EFG and chemical shielding tensors were used to evaluate the 17O, 14N and 2H nuclear quadrupole resonance, NQR, and 17O, 15N, 13C and 1H nuclear magnetic resonance, NMR, parameters in the hexameric cluster, which are in good agreement with the available experimental data. The difference between the calculated NQR and NMR parameters of the monomer and hexamer cluster shows how much hydrogen bonding interactions affect the EFG and chemical shielding tensors of each nucleus. These results indicate that both O(3)-H(33)...O(5-3) and N-H(22)...O(6-4) hydrogen bonding have a major influence on NQR and NMR parameters. Also, the quantum chemical calculations indicate that the intra- and intermolecular hydrogen bonding interactions play an essential role in determining the relative orientation of EFG and chemical shielding principal components in the molecular frame axes.

  15. Hybrid Ceramic Matrix Fibrous Composites: an Overview

    Energy Technology Data Exchange (ETDEWEB)

    Naslain, R, E-mail: naslain@lcts.u-bordeaux1.fr [University of Bordeaux 3, Allee de La Boetie, 33600 Pessac (France)

    2011-10-29

    Ceramic-Matrix Composites (CMCs) consist of a ceramic fiber architecture in a ceramic matrix, bonded together through a thin interphase. The present contribution is limited to non-oxide CMCs. Their constituents being oxidation-prone, they are protected by external coatings. We state here that CMCs display a hybrid feature, when at least one of their components is not homogeneous from a chemical or microstructural standpoint. Hybrid fiber architectures are used to tailor the mechanical or thermal CMC-properties whereas hybrid interphases, matrices and coatings to improve CMC resistance to aggressive environments.

  16. A PBE hybrid functional study of blue-shifting and red-shifting hydrogen bonds in p hydrocarbons

    Directory of Open Access Journals (Sweden)

    Boaz Galdino de Oliveira

    2009-07-01

    Full Text Available This study examines a selected group of p hydrocarbon complexes, represented by C2H4•••HCF3, C2H2•••HCF3, C2H4•••HCF3 and C2H2•••HCF3, from a theoretical point of view. From BPBE/6-311++G(d,p calculations, the geometrical results of these complexes revealed an elongation and shortening of the H—C bond lengths of chloroform (HCCl3 and fluoroform (HCF3, respectively. In terms of the infrared spectrum, the analysis of stretch frequencies revealed that the variations in the H—C modes are essentially recognized as red and blue-shifting modes. For the purposes of understanding the two vibrational phenomena of the p hydrocarbon complexes studied here, PBE/6-311++G(d,p calculations were carried out and partitioning of atomic charges derived from the ChelpG algorithm were also used. A theoretical justification of red- and blue-shift effects was drawn up using charge-transfer analysis, which is manifested in the p bonds of acetylene and ethylene to chloroform (H—CCl3 and fluoroform (H—CF3, respectively. Finally, a further debate regarding the distinct polarizability power of chloroform and fluoroform is presented, concluding that, in comparison with fluoroform, chloroform possesses the requisite features for conventional proton donors and a red-shift is therefore observed in the C2H4•••HCCl3 and C2H2•••HCCl3 complexes.

  17. The electronic nature of the 1,4-β-glycosidic bond and its chemical environment: DFT insights into cellulose chemistry.

    Science.gov (United States)

    Loerbroks, Claudia; Rinaldi, Roberto; Thiel, Walter

    2013-11-25

    The molecular understanding of the chemistry of 1,4-β-glucans is essential for designing new approaches to the conversion of cellulose into platform chemicals and biofuels. In this endeavor, much attention has been paid to the role of hydrogen bonding occurring in the cellulose structure. So far, however, there has been little discussion about the implications of the electronic nature of the 1,4-β-glycosidic bond and its chemical environment for the activation of 1,4-β-glucans toward acid-catalyzed hydrolysis. This report sheds light on these central issues and addresses their influence on the acid hydrolysis of cellobiose and, by analogy, cellulose. The electronic structure of cellobiose was explored by DFT at the BB1 K/6-31++G(d,p) level. Natural bond orbital (NBO) analysis was performed to grasp the key bonding concepts. Conformations, protonation sites, and hydrolysis mechanisms were examined. The results for cellobiose indicate that cellulose is protected against hydrolysis not only by its supramolecular structure, as currently accepted, but also by its electronic structure, in which the anomeric effect plays a key role.

  18. Chemical bond properties and Mossbauer spectroscopy in (La1-xMx)2CuO4 (M=Ba, Sr)

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    By using the average band-gap model, the chemical bond properties of (La1-x Mx)2CuO4(M=Ba, Sr) were calculated . The calculated covalencies for Cu(O and La(O bond in the compounds are 0.3 and 0.03 respectively. M?ssbauer isomer shifts of 57Fe doped in La2CuO4 and 119Sn doped in La2CuO4 were calculated by using the chemical surrounding factor defined by covalency and electronic polarizability. Four valence state tin and three valence iron sites were identified in 57Fe and 119Sn doped La2CuO4.

  19. Solvent-free thermoplastic-poly(dimethylsiloxane) bonding mediated by UV irradiation followed by gas-phase chemical deposition of an adhesion linker

    Science.gov (United States)

    Ahn, S. Y.; Lee, N. Y.

    2015-07-01

    Here, we introduce a solvent-free strategy for bonding various thermoplastic substrates with poly(dimethylsiloxane) (PDMS) using ultraviolet (UV) irradiation followed by the gas-phase chemical deposition of aminosilane on the UV-irradiated thermoplastic substrates. The thermoplastic substrates were first irradiated with UV for surface hydrophilic treatment and were then grafted with vacuum-evaporated aminosilane, where the alkoxysilane side reacted with the oxidized surface of the thermoplastic substrate. Next, the amine-terminated thermoplastic substrates were treated with corona discharge to oxidize the surface and were bonded with PDMS, which was also oxidized via corona discharge. The two substrates were then hermetically sealed and pressed under atmospheric pressure for 30 min at 60 °C. This process enabled the formation of a robust siloxane bond (Si-O-Si) between the thermoplastic substrate and PDMS under relatively mild conditions using an inexpensive and commercially available UV lamp and Tesla coil. Various thermoplastic substrates were examined for bonding with PDMS, including poly(methylmethacrylate) (PMMA), polycarbonate (PC), poly(ethyleneterephthalate) (PET) and polystyrene (PS). Surface characterizations were performed by measuring the contact angle and performing x-ray photoelectron spectroscopy analysis, and the bond strength was analyzed by conducting various mechanical force measurements such as pull, delamination, leak and burst tests. The average bond strengths for the PMMA-PDMS, PC-PDMS, PET-PDMS and PS-PDMS assemblies were measured at 823.6, 379.3, 291.2 and 229.0 kPa, respectively, confirming the highly reliable performance of the introduced bonding strategy.

  20. Tensile bond strength of silicone-based soft denture liner to two chemically different denture base resins after various surface treatments.

    Science.gov (United States)

    Akin, Hakan; Tugut, Faik; Guney, Umit; Kirmali, Omer; Akar, Turker

    2013-01-01

    This study evaluated the effect of various surface treatments on the tensile bond strength of a silicone-based soft denture liner to two chemically different denture base resins, heat-cured polymethyl methacrylate (PMMA), and light-activated urethane dimethacrylate or Eclipse denture base resin. PMMA test specimens were fabricated and relined with a silicone-based soft denture liner (group AC). Eclipse test specimens were prepared according to the manufacturer's recommendation. Before they were relined with a silicone-based soft denture liner, each received one of three surface treatments: untreated (control, group EC), Eclipse bonding agent applied (group EB), and laser-irradiated (group EL). Tensile bond strength tests (crosshead speed = 5 mm/min) were performed for all specimens, and the results were analyzed using the analysis of variance followed by Tukey's test (p = 0.05). Eclipse denture base and PMMA resins presented similar bond strengths to the silicone-based soft denture liner. The highest mean force was observed in group EL specimens, and the tensile bond strengths in group EL were significantly different (p < 0.05) from those in the other groups.

  1. Intermolecular CH···O/N H-bonds in the biologically important pairs of natural nucleobases: a thorough quantum-chemical study.

    Science.gov (United States)

    Brovarets', Ol'ha O; Yurenko, Yevgen P; Hovorun, Dmytro M

    2014-01-01

    This study aims to cast light on the physico-chemical nature and energetic of the non-conventional CH···O/N H-bonds in the biologically important natural nucleobase pairs using a comprehensive quantum-chemical approach. As a whole, the 36 biologically important pairs, involving canonical and rare tautomers of nucleobases, were studied by means of all available up-to-date state-of-the-art quantum-chemical techniques along with quantum theory "Atoms in molecules" (QTAIM), Natural Bond Orbital (NBO) analysis, Grunenberg's compliance constants theory, geometrical and vibrational analyses to identify the CH···O/N interactions, reveal their physico-chemical nature and estimate their strengths as well as contribution to the overall base-pairs stability. It was shown that all the 38 CH···O/N contacts (25 CH···O and 13 CH···N H-bonds) completely satisfy all classical geometrical, electron-topological, in particular Bader's and "two-molecule" Koch and Popelier's, and vibrational criteria of H-bonding. The positive values of Grunenberg's compliance constants prove that the CH···O/N contacts in nucleobase pairs are stabilizing interactions unlike electrostatic repulsion and anti-H-bonds. NBO analysis indicates the electron density transfer from the lone electron pair of the acceptor atom (O/N) to the antibonding orbital corresponding to the donor group σ(∗)(CH). Moreover, significant increase in the frequency of the out-of-plane deformation modes γ (CH) under the formation of the CH···O (by 17.2÷81.3/10.8÷84.7 cm(-1)) and CH···N (by 32.7÷85.9/9.0÷77.9 cm(-1)) H-bonds at the density functional theory (DFT)/second-order Møller-Plesset (MP2) levels of theory, respectively, and concomitant changes of their intensities can be considered as reliable indicators of H-bonding. The strengths of the CH···O/N interactions, evaluated by means of Espinosa-Molins-Lecomte formula, lie within the range 0.45÷3.89/0.62÷4.10 kcal/mol for the CH

  2. Integrated Chemical Systems: The Simultaneous Formation of Hybrid Nanocomposites of Iron Oxide and Organo Silsesquioxanes

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, L; Clapsaddle, B; Jr., J S; Schaefer, D; Shea, K

    2004-10-15

    A sol-gel approach for the synthesis of hybrid nanocomposites of iron oxide and bridged polysilsesquioxanes has been established. The procedures allow for the simultaneous formation of iron oxide and polysilsesquioxane networks in monolithic xerogels and aerogels. These hybrid nanocomposites are synthesized from FeCl{sub 3} {center_dot} 6H{sub 2}O and functionalized silsesquioxane monomers in a one-pot reaction using epoxides as a gelation agent. The porosity and microstructure of the materials has been determined by nitrogen porosimetry, electron microscopy and ultra small angle X-ray scattering (USAXS). The hybrid nanocomposites exhibit a uniform dispersion of both components with no evidence for phase separation at length scales > 5 nm. At this limit of resolution it is not possible to distinguish between two independent interpenetrating networks integrated at molecular length scales or a random copolymer or mixtures of both.

  3. Unique chemical properties of metal-carbon bonds in metal-carboranyl and metal-carboryne complexes

    Institute of Scientific and Technical Information of China (English)

    QIU ZaoZao; XIE ZuoWei

    2009-01-01

    The metal-carbon bonds in metal-carboranyl and metal-carboryne complexes behave very differently from those in classical organometallic complexes. The unique electronic and steric properties of icosahedral carboranyl moiety make the M-C bond in metal-carboranyl complexes inert toward unsaturated molecules, and on the other hand, the sterically demanding carborane cage can induce unexpected C-C coupling reactions. The M-C bonds in metal-carboryne complexes are, however, active toward various kinds of unsaturated molecules and the reactivity patterns are dependent upon the electronic configurations of the metal ions. This account provides an overview of our recent work in this area.

  4. Unique chemical properties of metal-carbon bonds in metal-carboranyl and metal-carboryne complexes

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The metal-carbon bonds in metal-carboranyl and metal-carboryne complexes behave very differently from those in classical organometallic complexes. The unique electronic and steric properties of ico-sahedral carboranyl moiety make the M-C bond in metal-carboranyl complexes inert toward unsaturated molecules, and on the other hand, the sterically demanding carborane cage can induce unexpected C-C coupling reactions. The M-C bonds in metal-carboryne complexes are, however, active toward various kinds of unsaturated molecules and the reactivity patterns are dependent upon the electronic configurations of the metal ions. This account provides an overview of our recent work in this area.

  5. Use of a New Hybrid Heparin-Bonded Nitinol Ring Stent in the Popliteal Artery: Procedural and Mid-term Clinical and Anatomical Outcomes

    Energy Technology Data Exchange (ETDEWEB)

    Parthipun, Aneeta; Diamantopoulos, Athanasios; Kitrou, Panagiotis [King’s Health Partners, Department of Interventional Radiology, Guy’s and St. Thomas’ Hospitals, NHS Foundation Trust (United Kingdom); Padayachee, Soundrie [King’s Health Partners, Department of Ultrasonic Angiology, Guy’s and St. Thomas’ Hospitals, NHS Foundation Trust (United Kingdom); Karunanithy, Narayan; Ahmed, Irfan [King’s Health Partners, Department of Interventional Radiology, Guy’s and St. Thomas’ Hospitals, NHS Foundation Trust (United Kingdom); Zayed, Hany [King’s Health Partners, Department of Vascular Surgery, Guy’s and St. Thomas’ Hospitals, NHS Foundation Trust (United Kingdom); Katsanos, Konstantinos, E-mail: konstantinos.katsanos@gstt.nhs.uk, E-mail: katsanos@med.upatras.gr [King’s Health Partners, Department of Interventional Radiology, Guy’s and St. Thomas’ Hospitals, NHS Foundation Trust (United Kingdom)

    2015-08-15

    PurposeTo report the immediate and mid-term clinical and anatomical outcomes of a novel, hybrid, heparin-bonded, nitinol ring stent (TIGRIS; Gore Medical) when used for the treatment of lesions located in the popliteal artery.Materials and MethodsThis was a prospective single-centre registry. Patients eligible for inclusion were individuals suffering from symptomatic popliteal arterial occlusive disease (Rutherford–Becker stage 3–6; P1–P3 segments) and treated with placement of the TIGRIS stent(s). Patients were prospectively scheduled for clinical review and duplex ultrasound follow-up after 6 and 12 months. Outcome measures included immediate technical success, primary vessel patency, in-stent binary restenosis (evaluable by Duplex at 50 % threshold; PSVR > 2.0), freedom from target lesion revascularization (TLR) and amputation-free survival (AFS) estimated by Kaplan–Meier (K–M) survival analysis. Cox proportional-hazards regression analysis was also performed to adjust for confounders and search for independent predictors of outcomes.ResultsFrom August 2012 to March 2014, a total of 54 popliteal TIGRIS stents were implanted in 50 limbs of 48 patients (27 men and 21 women; mean age 76.0 ± 1.7 years). Median Rutherford–Becker stage was five at baseline and 37/50 (74.0 %) were chronic total occlusions. Technical success was achieved in all cases (100 %). Stented lesion length was 114.2 ± 36.9 mm (range 6–20 cm). Median follow-up was 11.8 ± 0.8 months. After 12 months, primary patency of the TIGRIS stent was 69.5 ± 10.2 % with an 86.1 ± 5.9 % freedom from TLR and 87 ± 5.0 % AFS (K–M estimates).ConclusionThe TIGRIS hybrid heparin-bonded nitinol ring stent is a safe and effective endovascular option for complex occlusive disease of the popliteal artery.

  6. Field-effect-based multifunctional hybrid sensor module for the determination of both (bio-)chemical and physical parameters

    Science.gov (United States)

    Schoening, Michael J.; Poghossian, Arshak; Schultze, J. Walter; Lueth, Hans

    2002-02-01

    Sensor systems for multi-parameter detection in fluidics usually combine different sensors, which are designed to detect either a physical or (bio-)chemical parameter. Therefore, such systems include a more complicated fabrication technology and measuring set-up. In this work, an ISFET (ion-sensitive field-effect transistor), which is well known as a (bio-)chemical sensor, is utilized as transducer for the detection of both (bio-)chemical and physical parameters. A multifunctional hybrid module for the determination of two (bio-)chemical parameters (pH, penicillin concentration) and three physical parameters (temperature, flow velocity and flow direction) using only two sensor structures, an ion generator and a reference electrode, is realized and its performance has been investigated. Here, a multifunctionality of the sensor system is achieved by means of different sensor arrangements and/or different operation modes. A Ta2O5-gate ISFET was used as transducer for all sensors. A novel time-of-flight type ISFET-based flow-velocity (flow rate) and flow-direction sensor using in-situ electrochemical generation of chemical tracers is presented. Due to the fast response of the ISFET (usually in the millisecond range), an ISFET-based flow sensor is suitable for the measurement of the flow velocity in a wide range. With regard to practical applications, pH measurements with this ISFET were performed in rain droplets.

  7. Describing the Diverse Geometries of Gold from Nanoclusters to Bulk—A First-Principles-Based Hybrid Bond-Order Potential

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, Badri; Kinaci, Alper; Sen, Fatih G.; Davis, Michael J.; Gray, Stephen K.; Chan, Maria K. Y.; Sankaranarayanan, Subramanian K. R. S.

    2016-05-19

    Molecular dynamics simulations using empirical force fields (EFFs) are crucial for gaining fundamental insights into atomic structure and long time scale dynamics of Au nanoclusters with far-reaching applications in energy and devices. This approach is thwarted by the failure of currently available EFFs in describing the size-dependent dimensionality and diverse geometries exhibited by Au clusters (e.g., planar structures, hollow cages, tubes, pyramids, space-filled structures). Here, we mitigate this issue by introducing a new hybrid bond-order potential (HyBOP), which accounts for (a) short-range interactions via Tersoff-type BOP terms that accurately treat bond directionality and (b) long-range dispersion effects by a scaled Lennard–Jones term whose contribution depends on the local atomic density. We optimized the independent parameters for our HyBOP using a global optimization scheme driven by genetic algorithms. Moreover, to ensure good transferability of these parameters across different length scales, we used an extensive training data set that encompasses structural and energetic properties of 1000 13-atom Au clusters, surface energies, as well as bulk polymorphs, obtained from density functional theory (DFT) calculations. Our newly developed HyBOP has been found to accurately describe (a) global minimum energy configurations at different cluster sizes as well as order of stability of various cluster configurations at any size, (b) critical size of transition from planar to globular clusters, (c) evolution of structural motifs with cluster size, and (c) thermodynamics, structure, elastic properties, and energetic ordering of bulk condensed phases as well as surfaces, in excellent agreement with DFT calculations and spectroscopic experiments. This makes our newly developed HyBOP a valuable, computationally robust but inexpensive tool for investigating a wide range of materials phenomena occurring in Au at the atomistic level.

  8. Chemical formation of hybrid di-nitrogen calls fungal codenitrification into question

    Science.gov (United States)

    Phillips, Rebecca L.; Song, Bongkeun; McMillan, Andrew M. S.; Grelet, Gwen; Weir, Bevan S.; Palmada, Thilak; Tobias, Craig

    2016-12-01

    Removal of excess nitrogen (N) can best be achieved through denitrification processes that transform N in water and terrestrial ecosystems to di-nitrogen (N2) gas. The greenhouse gas nitrous oxide (N2O) is considered an intermediate or end-product in denitrification pathways. Both abiotic and biotic denitrification processes use a single N source to form N2O. However, N2 can be formed from two distinct N sources (known as hybrid N2) through biologically mediated processes of anammox and codenitrification. We questioned if hybrid N2 produced during fungal incubation at neutral pH could be attributed to abiotic nitrosation and if N2O was consumed during N2 formation. Experiments with gas chromatography indicated N2 was formed in the presence of live and dead fungi and in the absence of fungi, while N2O steadily increased. We used isotope pairing techniques and confirmed abiotic production of hybrid N2 under both anoxic and 20% O2 atmosphere conditions. Our findings question the assumptions that (1) N2O is an intermediate required for N2 formation, (2) production of N2 and N2O requires anaerobiosis, and (3) hybrid N2 is evidence of codenitrification and/or anammox. The N cycle framework should include abiotic production of N2.

  9. Atomic volume, atomic distances and chemical bonding in solid metallic elements; Atomvolumen, Atomabstaende und chemische Bindung in festen metallischen Elementen

    Energy Technology Data Exchange (ETDEWEB)

    Troemel, M.; Huebner, S. [Frankfurt Univ. (Germany). Inst. fuer Anorganische Chemie

    2001-05-01

    Relationships between bond lengths and bond numbers and also between atomic volumes and valencies are derived and parameters for their calculation are given for the s-block, p-block, and d-block metals. From the atomic volumes under pressure, the valencies of three solid lanthanoids have been confirmed or redetermined: La 3; Ce 2, 3, and 4; Yb 2 and 3. (orig.)

  10. Ti-doped hydrogenated diamond like carbon coating deposited by hybrid physical vapor deposition and plasma enhanced chemical vapor deposition

    Science.gov (United States)

    Lee, Na Rae; Sle Jun, Yee; Moon, Kyoung Il; Sunyong Lee, Caroline

    2017-03-01

    Diamond-like carbon films containing titanium and hydrogen (Ti-doped DLC:H) were synthesized using a hybrid technique based on physical vapor deposition (PVD) and plasma enhanced chemical vapor deposition (PECVD). The film was deposited under a mixture of argon (Ar) and acetylene gas (C2H2). The amount of Ti in the Ti-doped DLC:H film was controlled by varying the DC power of the Ti sputtering target ranging from 0 to 240 W. The composition, microstructure, mechanical and chemical properties of Ti-doped DLC:H films with varying Ti concentrations, were investigated using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), nano indentation, a ball-on-disk tribometer, a four-point probe system and dynamic anodic testing. As a result, the optimum composition of Ti in Ti-doped DLC:H film using our hybrid method was found to be a Ti content of 18 at. %, having superior electrical conductivity and high corrosion resistance, suitable for bipolar plates. Its hardness value was measured to be 25.6 GPa with a low friction factor.

  11. Scanning electrochemical microscopy of graphene/polymer hybrid thin films as supercapacitors: Physical-chemical interfacial processes

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Sanju, E-mail: sanju.gupta@wku.edu; Price, Carson [Department of Physics and Astronomy, Western Kentucky University, 1906 College Heights Blvd., Bowling Green, KY 42101-3576 (United States)

    2015-10-15

    Hybrid electrode comprising an electric double-layer capacitor of graphene nanosheets and a pseudocapacitor of the electrically conducting polymers namely, polyaniline; PAni and polypyrrole; PPy are constructed that exhibited synergistic effect with excellent electrochemical performance as thin film supercapacitors for alternative energy. The hybrid supercapacitors were prepared by layer-by-layer (LbL) assembly based on controlled electrochemical polymerization followed by reduction of graphene oxide electrochemically producing ErGO, for establishing intimate electronic contact through nanoscale architecture and chemical stability, producing a single bilayer of (PAni/ErGO){sub 1}, (PPy/ErGO){sub 1}, (PAni/GO){sub 1} and (PPy/GO){sub 1}. The rationale design is to create thin films that possess interconnected graphene nanosheets (GNS) with polymer nanostructures forming well-defined tailored interfaces allowing sufficient surface adsorption and faster ion transport due to short diffusion distances. We investigated their electrochemical properties and performance in terms of gravimetric specific capacitance, C{sub s}, from cyclic voltammograms. The LbL-assembled bilayer films exhibited an excellent C{sub s} of ≥350 F g{sup −1} as compared with constituents (∼70 F g{sup −1}) at discharge current density of 0.3 A g{sup −1} that outperformed many other hybrid supercapacitors. To gain deeper insights into the physical-chemical interfacial processes occurring at the electrode/electrolyte interface that govern their operation, we have used scanning electrochemical microscopy (SECM) technique in feedback and probe approach modes. We present our findings from viewpoint of reinforcing the role played by heterogeneous electrode surface composed of nanoscale graphene sheets (conducting) and conducting polymers (semiconducting) backbone with ordered polymer chains via higher/lower probe current distribution maps. Also targeted is SECM imaging that allowed to determine

  12. Scanning electrochemical microscopy of graphene/polymer hybrid thin films as supercapacitors: Physical-chemical interfacial processes

    Directory of Open Access Journals (Sweden)

    Sanju Gupta

    2015-10-01

    Full Text Available Hybrid electrode comprising an electric double-layer capacitor of graphene nanosheets and a pseudocapacitor of the electrically conducting polymers namely, polyaniline; PAni and polypyrrole; PPy are constructed that exhibited synergistic effect with excellent electrochemical performance as thin film supercapacitors for alternative energy. The hybrid supercapacitors were prepared by layer-by-layer (LbL assembly based on controlled electrochemical polymerization followed by reduction of graphene oxide electrochemically producing ErGO, for establishing intimate electronic contact through nanoscale architecture and chemical stability, producing a single bilayer of (PAni/ErGO1, (PPy/ErGO1, (PAni/GO1 and (PPy/GO1. The rationale design is to create thin films that possess interconnected graphene nanosheets (GNS with polymer nanostructures forming well-defined tailored interfaces allowing sufficient surface adsorption and faster ion transport due to short diffusion distances. We investigated their electrochemical properties and performance in terms of gravimetric specific capacitance, Cs, from cyclic voltammograms. The LbL-assembled bilayer films exhibited an excellent Cs of ≥350 F g−1 as compared with constituents (∼70 F g−1 at discharge current density of 0.3 A g−1 that outperformed many other hybrid supercapacitors. To gain deeper insights into the physical-chemical interfacial processes occurring at the electrode/electrolyte interface that govern their operation, we have used scanning electrochemical microscopy (SECM technique in feedback and probe approach modes. We present our findings from viewpoint of reinforcing the role played by heterogeneous electrode surface composed of nanoscale graphene sheets (conducting and conducting polymers (semiconducting backbone with ordered polymer chains via higher/lower probe current distribution maps. Also targeted is SECM imaging that allowed to determine electrochemical (reactivity of surface ion

  13. Hydrogen Atomic Positions of O-H···O Hydrogen Bonds in Solution and in the Solid State: The Synergy of Quantum Chemical Calculations with ¹H-NMR Chemical Shifts and X-ray Diffraction Methods.

    Science.gov (United States)

    Siskos, Michael G; Choudhary, M Iqbal; Gerothanassis, Ioannis P

    2017-03-07

    The exact knowledge of hydrogen atomic positions of O-H···O hydrogen bonds in solution and in the solid state has been a major challenge in structural and physical organic chemistry. The objective of this review article is to summarize recent developments in the refinement of labile hydrogen positions with the use of: (i) density functional theory (DFT) calculations after a structure has been determined by X-ray from single crystals or from powders; (ii) ¹H-NMR chemical shifts as constraints in DFT calculations, and (iii) use of root-mean-square deviation between experimentally determined and DFT calculated ¹H-NMR chemical shifts considering the great sensitivity of ¹H-NMR shielding to hydrogen bonding properties.

  14. Effect of different mechanical and chemical surface treatments on the repaired bond strength of an indirect composite resin.

    Science.gov (United States)

    Kimyai, Soodabeh; Oskoee, Siavash Savadi; Mohammadi, Narmin; Rikhtegaran, Sahand; Bahari, Mahmoud; Oskoee, Parnian Alizadeh; Vahedpour, Hafez

    2015-02-01

    This study compared the effects of two mechanical surface preparation techniques, air abrasion and Nd:YAG laser, with the use of two adhesive systems, self-etch and etch and rinse, on the repair bond strengths of an indirect composite resin. One hundred fifty cylindrical samples of an indirect composite resin were prepared and randomly divided into six groups (n = 25). In groups 1-3, the composite resin surfaces were respectively prepared as follows: no roughening, roughening by air abrasion, and roughening by Nd:YAG laser, followed by application of an etch-and-rinse adhesive. In groups 4-6, the preparation techniques were respectively the same as those in groups 1-3, followed by application of a self-etch adhesive. Subsequently, a direct composite resin was added and repair bond strengths were measured. Data were analyzed with two-way ANOVA and post hoc Tukey's test. Mean bond strength value was significant based on the preparation technique (P composite resin with air abrasion and Nd:YAG laser resulted in a significant increase in the repair bond strength, with air abrasion being more effective. There were no significant differences in bond strength between the two adhesives.

  15. Multifunctional hybrid nanocomposites based on carbon nanotubes and chemically modified graphene

    OpenAIRE

    Bosch Navarro, Concepcion

    2013-01-01

    La Tesis trata del desarrollo de materiales híbridos multifuncionales basados en nanotubos de carbono y grafeno con interés en magnetismo molecular y electrónica molecular This Thesis deals with the chemistry and development of new hybrid multifunctional systems based on carbon nanotubes (CNTs) and graphene (G). To introduce both types of carbon nanoforms a brief historical overview of these systems has been briefly given at the Preface. Next and prior to the presentation of ...

  16. Comparative transcriptome analysis reveals carbohydrate and lipid metabolism blocks in Brassica napus L. male sterility induced by the chemical hybridization agent monosulfuron ester sodium

    OpenAIRE

    Li, Zhanjie; Cheng, Yufeng; Cui, Jianmin; Zhang, Peipei; Zhao, Huixian; Hu, Shengwu

    2015-01-01

    Background Chemical hybridization agents (CHAs) are often used to induce male sterility for the production of hybrid seeds. We previously discovered that monosulfuron ester sodium (MES), an acetolactate synthase (ALS) inhibitor of the herbicide sulfonylurea family, can induce rapeseed (Brassica napus L.) male sterility at approximately 1% concentration required for its herbicidal activity. To find some clues to the mechanism of MES inducing male sterility, the ultrastructural cytology observa...

  17. Evaluation of Questions in General Chemistry Textbooks According to the Form of the Questions and the Question-Answer Relationship (QAR): The Case of Intra-and Intermolecular Chemical Bonding

    Science.gov (United States)

    Pappa, Eleni T.; Tsaparlis, Georgios

    2011-01-01

    One way of checking to what extent instructional textbooks achieve their aim is to evaluate the questions they contain. In this work, we analyze the questions that are included in the chapters on chemical bonding of ten general chemistry textbooks. We study separately the questions on intra- and on intermolecular bonding, with the former…

  18. Quantum chemical modeling of benzene ethylation over H-ZSM-5 approaching chemical accuracy: a hybrid MP2:DFT study.

    Science.gov (United States)

    Hansen, Niels; Kerber, Torsten; Sauer, Joachim; Bell, Alexis T; Keil, Frerich J

    2010-08-25

    The alkylation of benzene by ethene over H-ZSM-5 is analyzed by means of a hybrid MP2:DFT scheme. Density functional calculations applying periodic boundary conditions (PBE functional) are combined with MP2 energy calculations on a series of cluster models of increasing size which allows extrapolation to the periodic MP2 limit. Basis set truncation errors are estimated by extrapolation of the MP2 energy to the complete basis set limit. Contributions from higher-order correlation effects are accounted for by CCSD(T) coupled cluster calculations. The sum of all contributions provides the "final estimates" for adsorption energies and energy barriers. Dispersion contributes significantly to the potential energy surface. As a result, the MP2:DFT potential energy profile is shifted downward compared to the PBE profile. More importantly, this shift is not the same for reactants and transition structures due to different self-interaction correction errors. The final enthalpies for ethene, benzene, and ethylbenzene adsorption on the Brønsted acid site at 298 K are -46, -78, and -110 kJ/mol, respectively. The intrinsic enthalpy barriers at 653 K are 117 and 119/94 kJ/mol for the one- and two-step alkylation, respectively. Intrinsic rate coefficients calculated by means of transition state theory are converted to apparent Arrhenius parameters by means of the multicomponent adsorption equilibrium. The simulated apparent activation energy (66 kJ/mol) agrees with experimental data (58-76 kJ/mol) within the uncertainty limit of the calculations. Adsorption energies obtained by adding a damped dispersion term to the PBE energies (PBE+D), agree within +/-7 kJ/mol, with the "final estimates", except for physisorption (pi-complex formation) and chemisorption of ethene (ethoxide formation) for which the PBE+D energies are 12.4 and 26.0 kJ/mol, respectively larger than the "final estimates". For intrinsic energy barriers, the PBE+D approach does not improve pure PBE results.

  19. Electronic structure, chemical bonding and elastic properties of the first thorium-containing nitride perovskite TaThN{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Bannikov, V.V.; Shein, I.R.; Ivanovskii, A.L. [Institute of Solid State Chemistry of the Ural Division of the Russian Academy of Sciences, GSP-145, 620041 Ekaterinburg (Russian Federation)

    2007-05-15

    The full-potential linearized augmented plane wave method with the generalized gradient approximation for the exchange and correlation potential (LAPW-GGA) is used to understand the electronic and elastic properties of the first thorium-containing nitride perovskite TaThN{sub 3}. Total and partial density of states, charge distributions as well as the elastic constants, bulk modulus, compressibility, shear modulus, Young modulus and Poisson ratio are obtained for the first time and analyzed in comparison with cubic ThN. The chemical bonding in TaThN{sub 3} is a combination of ionic Th-N and of mixed covalent-ionic Ta-N bonds. The cubic TaThN{sub 3} is semiconducting with the direct gap at about 0.65 eV. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. Chemical bonding structural analysis of nitrogen-doped ultrananocrystalline diamond/hydrogenated amorphous carbon composite films prepared by coaxial arc plasma deposition

    Science.gov (United States)

    Gima, Hiroki; Zkria, Abdelrahman; Katamune, Yūki; Ohtani, Ryota; Koizumi, Satoshi; Yoshitake, Tsuyoshi

    2017-01-01

    Nitrogen-doped ultra-nanocrystalline diamond/hydrogenated amorphous carbon composite films prepared in hydrogen and nitrogen mixed-gas atmospheres by coaxial arc plasma deposition with graphite targets were studied electrically and chemical-bonding-structurally. The electrical conductivity was increased by nitrogen doping, accompanied by the production of n-type conduction. From X-ray photoemission, near-edge X-ray absorption fine-structure, hydrogen forward-scattering, and Fourier transform infrared spectral results, it is expected that hydrogen atoms that terminate diamond grain boundaries will be partially replaced by nitrogen atoms and, consequently, π C–N and C=N bonds that easily generate free electrons will be formed at grain boundaries.

  1. Quantum chemical study on influence of intermolecular hydrogen bonding on the geometry, the atomic charges and the vibrational dynamics of 2,6-dichlorobenzonitrile.

    Science.gov (United States)

    Agarwal, Parag; Bee, Saba; Gupta, Archana; Tandon, Poonam; Rastogi, V K; Mishra, Soni; Rawat, Poonam

    2014-01-01

    FT-IR (4000-400 cm(-1)) and FT-Raman (4000-200 cm(-1)) spectral measurements on solid 2,6-dichlorobenzonitrile (2,6-DCBN) have been done. The molecular geometry, harmonic vibrational frequencies and bonding features in the ground state have been calculated by density functional theory at the B3LYP/6-311++G (d,p) level. A comparison between the calculated and the experimental results covering the molecular structure has been made. The assignments of the fundamental vibrational modes have been done on the basis of the potential energy distribution (PED). To investigate the influence of intermolecular hydrogen bonding on the geometry, the charge distribution and the vibrational spectrum of 2,6-DCBN; calculations have been done for the monomer as well as the tetramer. The intermolecular interaction energies corrected for basis set superposition error (BSSE) have been calculated using counterpoise method. Based on these results, the correlations between the vibrational modes and the structure of the tetramer have been discussed. Molecular electrostatic potential (MEP) contour map has been plotted in order to predict how different geometries could interact. The Natural Bond Orbital (NBO) analysis has been done for the chemical interpretation of hyperconjugative interactions and electron density transfer between occupied (bonding or lone pair) orbitals to unoccupied (antibonding or Rydberg) orbitals. UV spectrum was measured in methanol solution. The energies and oscillator strengths were calculated by Time Dependent Density Functional Theory (TD-DFT) and matched to the experimental findings. TD-DFT method has also been used for theoretically studying the hydrogen bonding dynamics by monitoring the spectral shifts of some characteristic vibrational modes involved in the formation of hydrogen bonds in the ground and the first excited state. The (13)C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by the Gauge independent atomic orbital

  2. A comparative effect of various surface chemical treatments on the resin composite-composite repair bond strength

    Directory of Open Access Journals (Sweden)

    Shaloo Gupta

    2015-01-01

    Full Text Available Aim: The aim of this in vitro study was an attempt to investigate the effect of different surface treatments on the bond strength between pre-existing composite and repair composite resin. Materials and Methods: Forty acrylic blocks were prepared in a cuboidal mould. In each block, a well of 5 mm diameter and 5 mm depth was prepared to retain the composite resin (Filtek™ Z350, 3M/ESPE. Aging of the composite discs was achieved by storing them in water at 37°C for 1 week, and after that were divided into 5 groups (n = 8 according to surface treatment: Group I- 37% phosphoric acid, Group II-10% hydrofluoric acid, Group III-30% citric acid, Group IV-7% maleic acid and Group V- Adhesive (no etchant. The etched surfaces were rinsed and dried followed by application of bonding agent (Adper™ Single Bond 2. 3M/ESPE. The repair composite was placed on aged composite, light-cured for 40 seconds and stored in water at 37°C for 1 week. Shear bond strength between the aged and the new composite resin was determined with a universal testing machine (crosshead speed of 0.5 mm/min. Statistical Analysis: The compressive shear strengths were compared for differences using ANOVA test followed by Tamhane′s T2 post hoc analysis. Results: The surface treatment with 10% hydrofluoric acid showed the maximum bond strength followed by 30% citric acid, 7% maleic acid and 37% phosphoric acid in decreasing order. Conclusion: The use of 10% hydrofluoric acid can be a good alternative for surface treatment in repair of composite resin restoration as compared to commonly used 37% orthophosphoric acid.

  3. A Hybrid Improved Genetic Algorithm and Its Application in Dynamic Optimization Problems of Chemical Processes

    Institute of Scientific and Technical Information of China (English)

    SUN Fan; DU Wenli; QI Rongbin; QIAN Feng; ZHONG Weimin

    2013-01-01

    The solutions of dynamic optimization problems are usually very difficult due to their highly nonlinear and multidimensional nature.Genetic algorithm(GA)has been proved to be a feasible method when the gradient is difficult to calculate.Its advantage is that the control profiles at all time stages are optimized simultaneously,but its convergence is very slow in the later period of evolution and it is easily trapped in the local optimum.In this study,a hybrid improved genetic algorithm(HIGA)for solving dynamic optimization problems is proposed to overcome these defects.Simplex method(SM)is used to perform the local search in the neighborhood of the optimal solution.By using SM,the ideal searching direction of global optimal solution could be found as soon as possible and the convergence speed of the algorithm is improved.The hybrid algorithm presents some improvements,such as protecting the best individual,accepting immigrations,as well as employing adaptive crossover and Gaussian mutation operators.The efficiency of the proposed algorithm is demonstrated by solving several dynamic optimization problems.At last,HIGA is applied to the optimal production of secreted protein in a fed batch reactor and the optimal feed-rate found by HIGA is effective and relatively stable.

  4. Nitrilotris(methylenephosphonato)potassium K[μ6-NH(CH2PO3)3H4]: Synthesis, structure, and the nature of the K-O chemical bond

    Science.gov (United States)

    Somov, N. V.; Chausov, F. F.; Zakirova, R. M.

    2016-07-01

    The crystal structure of nitrilotris(methylenephosphonato)potassium K[μ6-NH(CH2PO3)3H4]—a three-dimensional coordination polymer—was determined. The potassium atom is coordinated by seven oxygen atoms belonging to the six nearest ligand molecules, resulting in distorted monocapped octahedral coordination geometry. The complex contains the four-membered chelate ring K-O-P-O. The K-O chemical bond is predominantly ionic. Meanwhile, the bonds of the potassium atom with some oxygen atoms have a noticeable covalent component. In addition to coordination bonds, the molecules in the crystal packing are linked by hydrogen bonds.

  5. Annealing-induced changes in chemical bonding and surface characteristics of chemical solution deposited Pb0.95La0.05Zr0.54Ti0.46O3 thin films

    Science.gov (United States)

    Batra, Vaishali; Ramana, C. V.; Kotru, Sushma

    2016-08-01

    We report the effect of post deposition annealing temperature (Ta = 550 and 750 °C) on the surface morphology, chemical bonding and structural development of lanthanum doped lead zirconate titanate (Pb0.95La0.05Zr0.54Ti0.46O3; referred to PLZT) thin films prepared using chemical solution deposition method. Atomic force microscopy demonstrates formation of nanocrystallites in the film annealed at Ta = 750 °C. X-ray photoelectron spectroscopy (XPS) analyses indicate that the binding energies (BE) of the Pb 4f, Zr 3d, and Ti 2p doublet experience a positive energy shift at Ta = 750 °C, whereas the BE of O 1s and La 3d doublet show a negative shift with respect to the BE of the films annealed at Ta = 750 °C. Thermal induced crystallization and chemical modification is evident from XPS results. The Ar+ sputtering of the films reveals change in oxidation state and chemical bonding between the constituent atoms, with respect to Ta. Raman spectroscopy used to study phonon-light interactions show shift in longitudinal and transverse optical modes with the change in Ta, confirming the change in phase and crystallinity of these films. The results suggest annealing at Ta = 750 °C yield crystalline perovskite PLZT films, which is essential to obtain photovoltaic response from devices based on such films.

  6. Chemical insight from density functional modeling of molecular adsorption: Tracking the bonding and diffusion of anthracene derivatives on Cu(111) with molecular orbitals

    Energy Technology Data Exchange (ETDEWEB)

    Wyrick, Jonathan; Bartels, Ludwig, E-mail: ludwig.bartels@ucr.edu [Pierce Hall, University of California-Riverside, Riverside, California 92521 (United States); Einstein, T. L. [Department of Physics and Condensed Matter Theory Center, University of Maryland, College Park, Maryland 20742-4111 (United States)

    2015-03-14

    We present a method of analyzing the results of density functional modeling of molecular adsorption in terms of an analogue of molecular orbitals. This approach permits intuitive chemical insight into the adsorption process. Applied to a set of anthracene derivates (anthracene, 9,10-anthraquinone, 9,10-dithioanthracene, and 9,10-diselenonanthracene), we follow the electronic states of the molecules that are involved in the bonding process and correlate them to both the molecular adsorption geometry and the species’ diffusive behavior. We additionally provide computational code to easily repeat this analysis on any system.

  7. Chemical insight from density functional modeling of molecular adsorption: Tracking the bonding and diffusion of anthracene derivatives on Cu(111) with molecular orbitals

    Science.gov (United States)

    Wyrick, Jonathan; Einstein, T. L.; Bartels, Ludwig

    2015-03-01

    We present a method of analyzing the results of density functional modeling of molecular adsorption in terms of an analogue of molecular orbitals. This approach permits intuitive chemical insight into the adsorption process. Applied to a set of anthracene derivates (anthracene, 9,10-anthraquinone, 9,10-dithioanthracene, and 9,10-diselenonanthracene), we follow the electronic states of the molecules that are involved in the bonding process and correlate them to both the molecular adsorption geometry and the species' diffusive behavior. We additionally provide computational code to easily repeat this analysis on any system.

  8. Heavy metal incorporated helium ion active hybrid non-chemically amplified resists: Nano-patterning with low line edge roughness

    Science.gov (United States)

    Reddy, Pulikanti Guruprasad; Thakur, Neha; Lee, Chien-Lin; Chien, Sheng-Wei; Pradeep, Chullikkattil P.; Ghosh, Subrata; Tsai, Kuen-Yu; Gonsalves, Kenneth E.

    2017-08-01

    Helium (He) ion lithography is being considered as one of the most promising and emerging technology for the manufacturing of next generation integrated circuits (ICs) at nanolevel. However, He-ion active resists are rarely reported. In this context, we are introducing a new non-chemically amplified hybrid resist (n-CAR), MAPDSA-MAPDST, for high resolution He-ion beam lithography (HBL) applications. In the resist architecture, 2.15 % antimony is incorporated as heavy metal in the form of antimonate. This newly developed resists has successfully used for patterning 20 nm negative tone features at a dose of 60 μC/cm2. The resist offered very low line edge roughness (1.27±0.31 nm) for 20 nm line features. To our knowledge, this is the first He-ion active hybrid resist for nanopatterning. The contrast (γ) and sensitivity (E0) of this resist were calculated from the contrast curve as 0.73 and 7.2 μC/cm2, respectively.

  9. Heavy metal incorporated helium ion active hybrid non-chemically amplified resists: Nano-patterning with low line edge roughness

    Directory of Open Access Journals (Sweden)

    Pulikanti Guruprasad Reddy

    2017-08-01

    Full Text Available Helium (He ion lithography is being considered as one of the most promising and emerging technology for the manufacturing of next generation integrated circuits (ICs at nanolevel. However, He-ion active resists are rarely reported. In this context, we are introducing a new non-chemically amplified hybrid resist (n-CAR, MAPDSA-MAPDST, for high resolution He-ion beam lithography (HBL applications. In the resist architecture, 2.15 % antimony is incorporated as heavy metal in the form of antimonate. This newly developed resists has successfully used for patterning 20 nm negative tone features at a dose of 60 μC/cm2. The resist offered very low line edge roughness (1.27±0.31 nm for 20 nm line features. To our knowledge, this is the first He-ion active hybrid resist for nanopatterning. The contrast (γ and sensitivity (E0 of this resist were calculated from the contrast curve as 0.73 and 7.2 μC/cm2, respectively.

  10. Hybrid graphene oxide/DAB-Am-16 dendrimer: Preparation, characterization chemical reactivity and their electrocatalytic detection of L-Dopamine

    Science.gov (United States)

    Do Carmo, Devaney Ribeiro; Fernandes, Daniela Silvestrini

    2017-09-01

    Graphene oxide (GO) was chemically modified with a poly(propylene)imine Generation 3.0 dendrimer (DAB-Am-16). The characterization, structure and properties of hybrid graphene oxide/DAB-Am-16 dendrimer was studied by Raman spectroscopy, Fourier-Transforming Infrared Spectroscopy (FT-IR), X-Ray Photoelectron Spectroscopic (XPS), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Thermogravimetric analysis. After functionalized the hybrid material (GOD) can interact with copper and subsequently with hexacyanoferrate (III) ions (GODHCu). The GODHCu incorporated into a graphite paste electrode (20% w/w) was applied to an electrocatalytic detection of neurotransmitter L-dopamine using differential pulse voltammetry. The analytical curve showed a linear response in the concentration range from 1.0 × 10-7 to 1.0 × 10-5 mol L-1 with a corresponding equation Y(A) = 1.706 × 10-5 + 0.862 [L-dopamine] and a correlation coefficient r2 = 0.998. The detection limit was 6.36 × 10-7 mol L-1 with a relative standard deviation of ±4% (n = 3) and an amperometric sensitivity of 0.862 A/mol L-1.

  11. Chemical and mechanical properties of silica hybrid films from NaOH catalyzed sols for micromachining with diamond cutting tools

    Energy Technology Data Exchange (ETDEWEB)

    Prenzel, T., E-mail: tprenzel@uni-bremen.de [Stiftung Institut für Werkstofftechnik, Badgasteiner Str. 3, 28359 Bremen (Germany); Mehner, A. [Stiftung Institut für Werkstofftechnik, Badgasteiner Str. 3, 28359 Bremen (Germany); Lucca, D.A.; Qi, Y.; Harriman, T.A. [School of Mechanical and Aerospace Engineering, 218 Engineering North, Oklahoma State University, Stillwater, OK 74078 (United States); Mutlugünes, Y. [Labor für Mikrozerspanung — LFM, Badgasteiner Str. 2, 28359 Bremen (Germany); Shojaee, S.A. [School of Mechanical and Aerospace Engineering, 218 Engineering North, Oklahoma State University, Stillwater, OK 74078 (United States); Wang, Y.Q.; Williams, D. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Nastasi, M. [Nebraska Center for Energy Sciences Research, University of Nebraska, 230 Whittier Research Center, 2200 Vine Street Lincoln, NE 68583-0857 (United States); Zoch, H.-W. [Stiftung Institut für Werkstofftechnik, Badgasteiner Str. 3, 28359 Bremen (Germany); Swiderek, P. [Institute of Applied and Physical Chemistry, University of Bremen, Leobener Straße, 28359 Bremen (Germany)

    2013-03-01

    Manufacturing of microstructured mold surfaces was realized by the micromachining of thick sol–gel silica hybrid coatings. The films were deposited onto pre-machined steel molds by spin coating using NaOH-catalyzed sols from organosilicate precursors. The effect of the sol synthesis and the heat treatment on the mechanical and chemical properties of these films was studied in order to develop thick and crack-free films with appropriate properties for micromachining with diamond cutting tools. The hardness was measured by nanoindentation as a function of the heat treatment temperature. The transition from soft organic gel films to hard glass-like films due to the thermal treatment was characterized by X-ray photoelectron spectroscopy, elastic recoil detection, and Raman and infrared spectroscopies. The films from NaOH catalyzed sols showed a complex transition from aliphatic carbon originating from hydrocarbon groups to carbonates, carboxylates and disordered carbon clusters. - Highlights: ► Thick silica hybrid films were micromachined with diamond cutting tools. ► The nanoindentation hardness increased with the heat treatment temperature. ► The role of sodium hydroxide in base catalyzed silica sols was studied. ► Formation of carbonates, carboxylates and disordered carbon was observed.

  12. Prevalence of Bimolecular Routes in the Activation of Diatomic Molecules with Strong Chemical Bonds (O2, NO, CO, N2) on Catalytic Surfaces.

    Science.gov (United States)

    Hibbitts, David; Iglesia, Enrique

    2015-05-19

    Dissociation of the strong bonds in O2, NO, CO, and N2 often involves large activation barriers on low-index planes of metal particles used as catalysts. These kinetic hurdles reflect the noble nature of some metals (O2 activation on Au), the high coverages of co-reactants (O2 activation during CO oxidation on Pt), or the strength of the chemical bonds (NO on Pt, CO and N2 on Ru). High barriers for direct dissociations from density functional theory (DFT) have led to a consensus that "defects", consisting of low-coordination exposed atoms, are required to cleave such bonds, as calculated by theory and experiments for model surfaces at low coverages. Such sites, however, bind intermediates strongly, rendering them unreactive at the high coverages prevalent during catalysis. Such site requirements are also at odds with turnover rates that often depend weakly on cluster size or are actually higher on larger clusters, even though defects, such as corners and edges, are most abundant on small clusters. This Account illustrates how these apparent inconsistencies are resolved through activations of strong bonds assisted by co-adsorbates on crowded low-index surfaces. Catalytic oxidations occur on Au clusters at low temperatures in spite of large activation barriers for O2 dissociation on Au(111) surfaces, leading to proposals that O2 activation requires low-coordination Au atoms or Au-support interfaces. When H2O is present, however, O2 dissociation proceeds with low barriers on Au(111) because chemisorbed peroxides (*OOH* and *HOOH*) form and weaken O-O bonds before cleavage, thus allowing activation on low-index planes. DFT-derived O2 dissociation barriers are much lower on bare Pt surfaces, but such surfaces are nearly saturated with CO* during CO oxidation. A dearth of vacant sites causes O2* to react with CO* to form *OOCO* intermediates that undergo O-O cleavage. NO-H2 reactions occur on Pt clusters saturated with NO* and H*; direct NO* dissociation requires vacant

  13. Properties of MgB{sub 2} films grown at various temperatures by hybrid physical-chemical vapour deposition

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ke; Veldhorst, Menno; Li, Qi; Xi, X X [Department of Physics, Pennsylvania State University, University Park, PA 16802 (United States); Lee, Che-Hui; Lamborn, Daniel R; DeFrain, Raymond; Redwing, Joan M [Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States)

    2008-09-15

    A hybrid physical-chemical vapour deposition (HPCVD) system consisting of separately controlled Mg-source heater and substrate heater is used to grow MgB{sub 2} thin films and thick films at various temperatures. We are able to grow superconducting MgB{sub 2} thin films at temperatures as low as 350 deg. C with a T{sub c0} of 35.5 K. MgB{sub 2} films up to 4 {mu}m in thickness grown at 550 deg. C have J{sub c} over 10{sup 6} A cm{sup -2} at 5 K and zero applied field. The low deposition temperature of MgB{sub 2} films is desirable for all-MgB{sub 2} tunnel junctions and MgB{sub 2} thick films are important for applications in coated conductors.

  14. Ag nanoparticle-ZnO nanowire hybrid nanostructures as enhanced and robust antimicrobial textiles via a green chemical approach.

    Science.gov (United States)

    Li, Zhou; Tang, Haoying; Yuan, Weiwei; Song, Wei; Niu, Yongshan; Yan, Ling; Yu, Min; Dai, Ming; Feng, Siyu; Wang, Menghang; Liu, Tengjiao; Jiang, Peng; Fan, Yubo; Wang, Zhong Lin

    2014-04-11

    A new approach for fabrication of a long-term and recoverable antimicrobial nanostructure/textile hybrid without increasing the antimicrobial resistance is demonstrated. Using in situ synthesized Ag nanoparticles (NPs) anchored on ZnO nanowires (NWs) grown on textiles by a 'dip-in and light-irradiation' green chemical method, we obtained ZnONW@AgNP nanocomposites with small-size and uniform Ag NPs, which have shown superior performance for antibacterial applications. These new Ag/ZnO/textile antimicrobial composites can be used for wound dressings and medical textiles for topical and prophylactic antibacterial treatments, point-of-use water treatment to improve the cleanliness of water and antimicrobial air filters to prevent bioaerosols accumulating in ventilation, heating, and air-conditioning systems.

  15. Development of Computational Approaches for Simulation and Advanced Controls for Hybrid Combustion-Gasification Chemical Looping

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Abhinaya; Lou, Xinsheng; Neuschaefer, Carl; Chaudry, Majid; Quinn, Joseph

    2012-07-31

    This document provides the results of the project through September 2009. The Phase I project has recently been extended from September 2009 to March 2011. The project extension will begin work on Chemical Looping (CL) Prototype modeling and advanced control design exploration in preparation for a scale-up phase. The results to date include: successful development of dual loop chemical looping process models and dynamic simulation software tools, development and test of several advanced control concepts and applications for Chemical Looping transport control and investigation of several sensor concepts and establishment of two feasible sensor candidates recommended for further prototype development and controls integration. There are three sections in this summary and conclusions. Section 1 presents the project scope and objectives. Section 2 highlights the detailed accomplishments by project task area. Section 3 provides conclusions to date and recommendations for future work.

  16. Foliar chemical attributes of the hybrid bred from Eucalyptus citriodora x E. torelliana and its parental taxa, and implications for fungal resistance

    Directory of Open Access Journals (Sweden)

    Vinay K. Varshney

    2012-06-01

    Full Text Available One of the important aspects of hybridization is to understand the interaction between hybrid plants and the pests and diseases of the parental taxa. The foliar chemical attributes were compared between the hybrid of Eucalyptus citriodora and E. torelliana and its parental taxa. The fungus, Cylindrocladium quinqueseptatum, to which the hybrid and one parent E. torelliana have been observed resistant in the field, was used to examine patterns of resistance in relation to foliar constituents found active in labo-ratory bioassays. Concentration of active constituents of the hybrid was higher (monoterpenes- a-pinene, ß-pinene and citronellal, and total phenolics than either parent or equivalent (ursolic acid to parent E. torelliana thus suggesting an resistance pattern of hybrid. Beta-pinene, ursolic acid and total phenolics were found to be heritable. The findings suggest a chemical basis for fungal resistance and also indicate that the constituents could be used for screening of the disease resistant progeny in this tree system. 

  17. The Bond Strength of Composite Resin to Dental Casting Alloys Using an Electro-Chemical Tin Plating System.

    Science.gov (United States)

    1985-06-01

    limit and modulus of elasticity of acrylic resins may lead to excessive plastic deformation when placed under the stresses encounted in prosthetic...etching process has been recently introduced which is reported to be effective in bonding composite resin to both base metal and gold based alloys. (Veen et... dentures , porcelain inlays, metal ceramic restorations, and porcelain laminate veneers. (Tylman, 1970; Craig, 1980; Horn, 1983) The complete porcelain

  18. Socialization of didactic units for teaching-learning of chemical bond to students of basic course in high school

    National Research Council Canada - National Science Library

    Mercedes Cárdenas-Ojeda

    2016-01-01

    .... The test Covalent Bond and its structure was applied as a diagnostic tool to 42 students of Chemistry and Bachelor of Natural Science and Environmental Education of the Universidad Pedagógica y Tecnológica de Colombia, (UPTC) the perception of this topic becomes a field that allows to explain the natural phenomena and its accurate explanation allows, on one hand, to avoid the students adapt conceptual mistakes, and on the other, foster meaningful learning in them.

  19. A hybrid moment equation approach to gas-grain chemical modeling

    CERN Document Server

    Du, Fujun

    2011-01-01

    [Context] The stochasticity of grain chemistry requires special care in modeling. Previously methods based on the modified rate equation, the master equation, the moment equation, and Monte Carlo simulations have been used. [Aims] We attempt to develop a systematic and efficient way to model the gas-grain chemistry with a large reaction network as accurately as possible. [Methods] We present a hybrid moment equation approach which is a general and automatic method where the generating function is used to generate the moment equations. For large reaction networks, the moment equation is cut off at the second order, and a switch scheme is used when the average population of certain species reaches 1. For small networks, the third order moments can also be utilized to achieve a higher accuracy. [Results] For physical conditions in which the surface reactions are important, our method provides a major improvement over the rate equation approach, when benchmarked against the rigorous Monte Carlo results. For eithe...

  20. A quantum-chemical validation about the formation of hydrogen bonds and secondary interactions in intermolecular heterocyclic systems

    Directory of Open Access Journals (Sweden)

    Boaz Galdino Oliveira

    2009-08-01

    Full Text Available We have performed a detailed theoretical study in order to understand the charge density topology of the C2H4O···C2H2 and C2H4S···C2H2 heterocyclic hydrogen-bonded complexes. Through the calculations derived from Quantum Theory of Atoms in Molecules (QTAIM, it was observed the formation of hydrogen bonds and secondary interactions. Such analysis was performed through the determination of optimized geometries at B3LYP/6-31G(d,p level of theory, by which is that QTAIM topological operators were computed, such as the electronic density ρ(r, Laplacian Ñ2ρ(r, and ellipticity ε. The examination of the hydrogen bonds has been performed through the measurement of ρ(r, Ñ2ρ(r and ε between (O···H—C and (S···H—C, whereas the secondary interaction between axial hydrogen atoms Hα and carbon of acetylene. In this insight, it was verified the existence of secondary interaction only in C2H4S···C2H2 complex because its structure is propitious to form multiple interactions.

  1. Magnetic isotope effect and theory of atomic orbital hybridization to predict a mechanism of chemical exchange reactions.

    Science.gov (United States)

    Epov, Vladimir N

    2011-08-07

    A novel approach is suggested to investigate the mechanisms of chemical complexation reactions based on the results of Fujii with co-workers; they have experimentally observed that several metals and metalloids demonstrate mass-independent isotope fractionation during the reactions with the DC18C6 crown ether using solvent-solvent extraction. In this manuscript, the isotope fractionation caused by the magnetic isotope effect is used to understand the mechanisms of chemical exchange reactions. Due to the rule that reactions are allowed for certain electron spin states, and forbidden for others, magnetic isotopes show chemical anomalies during these reactions. Mass-independent fractionation is suggested to take place due to the hyperfine interaction of the nuclear spin with the electron spin of the intermediate product. Moreover, the sign of the mass-independent fractionation is found to be dependent on the element and its species, which is also explained by the magnetic isotope effect. For example, highly negative mass-independent isotope fractionation of magnetic isotopes was observed for reactions of DC18C6 with SnCl(2) species and with several Ru(III) chloro-species, and highly positive for reactions of this ether with TeCl(6)(2-), and with several Cd(II) and Pd(II) species. The atomic radius of an element is also a critical parameter for the reaction with crown ether, particularly the element ions with [Kr]4d(n)5s(m) electron shell fits the best with the DC18C6 crown ring. It is demonstrated that the magnetic isotope effect in combination with the theory of orbital hybridization can help to understand the mechanism of complexation reactions. The suggested approach is also applied to explain previously published mass-independent fractionation of Hg isotopes in other types of chemical exchange reactions.

  2. Impact of post-deposition annealing on interfacial chemical bonding states between AlGaN and ZrO{sub 2} grown by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Gang; Arulkumaran, Subramaniam; Ng, Geok Ing; Li, Yang; Ang, Kian Siong [Novitas, Nanoelectronics Center of Excellence, School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798 (Singapore); Wang, Hong, E-mail: ewanghong@ntu.edu.sg [Novitas, Nanoelectronics Center of Excellence, School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798 (Singapore); CINTRA CNRS/NTU/Thales, UMI 3288, 50 Nanyang Drive (Singapore); Ng, Serene Lay Geok; Ji, Rong [Data Storage Institute, Agency for Science Technology and Research (A-STAR), 5 Engineering Drive 1, 117608 (Singapore); Liu, Zhi Hong [Singapore-MIT Alliance for Research and Technology, 1 CREATE Way, Singapore 138602 (Singapore)

    2015-03-02

    The effect of post-deposition annealing on chemical bonding states at interface between Al{sub 0.5}Ga{sub 0.5}N and ZrO{sub 2} grown by atomic layer deposition (ALD) is studied by angle-resolved x-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. It has been found that both of Al-O/Al 2p and Ga-O/Ga 3d area ratio decrease at annealing temperatures lower than 500 °C, which could be attributed to “clean up” effect of ALD-ZrO{sub 2} on AlGaN. Compared to Ga spectra, a much larger decrease in Al-O/Al 2p ratio at a smaller take-off angle θ is observed, which indicates higher effectiveness of the passivation of Al-O bond than Ga-O bond through “clean up” effect near the interface. However, degradation of ZrO{sub 2}/AlGaN interface quality due to re-oxidation at higher annealing temperature (>500 °C) is also found. The XPS spectra clearly reveal that Al atoms at ZrO{sub 2}/AlGaN interface are easier to get oxidized as compared with Ga atoms.

  3. A theoretical study of water clusters: the relation between hydrogen-bond topology and interaction energy from quantum-chemical computations for clusters with up to 22 molecules.

    Science.gov (United States)

    Lenz, Annika; Ojamäe, Lars

    2005-05-07

    Quantum-chemical calculations of a variety of water clusters with eight, ten and twelve molecules were performed, as well as for selected clusters with up to 22 water molecules. Geometry optimizations were carried out at the B3LYP/cc-pVDZ level and single-point energies were calculated at the B3LYP/aug-cc-pVDZ level for selected clusters. The electronic energies were studied with respect to the geometry of the oxygen arrangement and six different characteristics of the hydrogen-bond arrangement in the cluster. Especially the effect of the placement of the non-hydrogen bonding hydrogens on the interaction energy was studied. Models for the interaction energy with respect to different characteristics of the hydrogen-bond arrangement were derived through least-square fits. The results from the study of the clusters with eight, ten and twelve molecules are used to predict possible low-energy structures for various shapes of clusters with up to 22 molecules.

  4. The Different Sensitive Behaviors of a Hydrogen-Bond Acidic Polymer-Coated SAW Sensor for Chemical Warfare Agents and Their Simulants

    Directory of Open Access Journals (Sweden)

    Yin Long

    2015-07-01

    Full Text Available A linear hydrogen-bond acidic (HBA linear functionalized polymer (PLF, was deposited onto a bare surface acoustic wave (SAW device to fabricate a chemical sensor. Real-time responses of the sensor to a series of compounds including sarin (GB, dimethyl methylphosphonate (DMMP, mustard gas (HD, chloroethyl ethyl sulphide (2-CEES, 1,5-dichloropentane (DCP and some organic solvents were studied. The results show that the sensor is highly sensitive to GB and DMMP, and has low sensitivity to HD and DCP, as expected. However, the sensor possesses an unexpected high sensitivity toward 2-CEES. This good sensing performance can’t be solely or mainly attributed to the dipole-dipole interaction since the sensor is not sensitive to some high polarity solvents. We believe the lone pair electrons around the sulphur atom of 2-CEES provide an electron-rich site, which facilitates the formation of hydrogen bonding between PLF and 2-CEES. On the contrary, the electron cloud on the sulphur atom of the HD molecule is offset or depleted by its two neighbouring strong electron-withdrawing groups, hence, hydrogen bonding can hardly be formed.

  5. The Different Sensitive Behaviors of a Hydrogen-Bond Acidic Polymer-Coated SAW Sensor for Chemical Warfare Agents and Their Simulants.

    Science.gov (United States)

    Long, Yin; Wang, Yang; Du, Xiaosong; Cheng, Luhua; Wu, Penglin; Jiang, Yadong

    2015-07-28

    A linear hydrogen-bond acidic (HBA) linear functionalized polymer (PLF), was deposited onto a bare surface acoustic wave (SAW) device to fabricate a chemical sensor. Real-time responses of the sensor to a series of compounds including sarin (GB), dimethyl methylphosphonate (DMMP), mustard gas (HD), chloroethyl ethyl sulphide (2-CEES), 1,5-dichloropentane (DCP) and some organic solvents were studied. The results show that the sensor is highly sensitive to GB and DMMP, and has low sensitivity to HD and DCP, as expected. However, the sensor possesses an unexpected high sensitivity toward 2-CEES. This good sensing performance can't be solely or mainly attributed to the dipole-dipole interaction since the sensor is not sensitive to some high polarity solvents. We believe the lone pair electrons around the sulphur atom of 2-CEES provide an electron-rich site, which facilitates the formation of hydrogen bonding between PLF and 2-CEES. On the contrary, the electron cloud on the sulphur atom of the HD molecule is offset or depleted by its two neighbouring strong electron-withdrawing groups, hence, hydrogen bonding can hardly be formed.

  6. Magnetovolume and chemical bonding effects of Ni atom in γ’-(Fe1-xNix)4N compounds

    Institute of Scientific and Technical Information of China (English)

    薛德胜; 李发伸

    1997-01-01

    By X-ray diffraction and high pressure Mossbauer spectroscopy, the structure and the hyperfine parameters of Ni substituted γ-Fe4N were investigated. The results of X-ray diffraction indicate that single phase γ’-(Fe1-xNix)4N compounds can be prepared in the composition range of 0≤x≤0.6, and with the increase of Ni content the lattice parameter is fit for the relationship a0(x) = 3.790 5-0.021 57x-0.031 67x2. By high pressure Mossbauer spectra, effects of magnetovolume and chemical bonding of Ni atom on hyperfine magnetic field and isomer shift of iron were distinguished for the first time, and their composition dependences for different lattice sites were studied simultaneously. It is found that the magnetovolume and chemical bonding have different influences on the properties of γ’-(Fe1-xNix)4N, and the latter one plays a key role in the property changes of γ-(Fe1-xNix)4N.

  7. Chemical Hybridization of Glucagon and Thyroid Hormone Optimizes Therapeutic Impact for Metabolic Disease

    DEFF Research Database (Denmark)

    Finan, Brian; Clemmensen, Christoffer; Zhu, Zhimeng

    2016-01-01

    Glucagon and thyroid hormone (T3) exhibit therapeutic potential for metabolic disease but also exhibit undesired effects. We achieved synergistic effects of these two hormones and mitigation of their adverse effects by engineering chemical conjugates enabling delivery of both activities within on...... the cardiovascular system from adverse T3 action. Our findings support the therapeutic utility of integrating these hormones into a single molecular entity that offers unique potential for treatment of obesity, type 2 diabetes, and cardiovascular disease.......Glucagon and thyroid hormone (T3) exhibit therapeutic potential for metabolic disease but also exhibit undesired effects. We achieved synergistic effects of these two hormones and mitigation of their adverse effects by engineering chemical conjugates enabling delivery of both activities within one...

  8. New Inorganic-organic Hybrid Compound Containing One Dimensional Keggin Polyoxometalate[SiW11O39Co]6- Chains:Preparation,Characterization and Application in Chemically Bulk-modified Electrode

    Institute of Scientific and Technical Information of China (English)

    WANG Xiu-li; LIN Hong-yan; LIU Guo-cheng; CHEN Bao-kuan; BI Yan-feng

    2008-01-01

    A new inorganic-organic hybrid compound based on polyoxometalate and organic ligand formulated as (H2bpp)3[SiW11O39Co]~2H2O(1)[bpp=1,3-bis(4-pyridyl)propane]was hydrothermally synthesized and structurally characterized by elemental analysis,single-crystal X-ray diffraction,IR,TG,and cyclic voltammetry.Single-crystal X-ray diffraction analysis reveals that compound 1 consists of interesting cobalt-monosubstituted POMs one dimensional chain together with protonated bpp ligands.Additionally,the polyoxoanions combined with the discrete organic substrates by hydrogen bond interactions to afford a supramolecular 3D network structure.The hybrid compound 1 was used as a bulk modifier to fabricate a three-dimensional chemically modified carbon paste electrode(1-CPE)by direct mixing.The electrochemical behavior and electrocatalysis of 1-CPE were studied in detail.The results indicate that 1-CPE has good electrocatalytic activities toward the reduction of nitrite or bromate in 1mol/L H2SO4 aqueous solution.1-CPE shows remarkable stability that can be ascribed to the insolubility of compound 1 and the supramolecular interactions existed between 1D POM anion chains and organic ligand bpp,which is very important for practical applications in electrode modification.

  9. Exploring Conceptual Frameworks of Models of Atomic Structures and Periodic Variations, Chemical Bonding, and Molecular Shape and Polarity: A Comparison of Undergraduate General Chemistry Students with High and Low Levels of Content Knowledge

    Science.gov (United States)

    Wang, Chia-Yu; Barrow, Lloyd H.

    2013-01-01

    The purpose of the study was to explore students' conceptual frameworks of models of atomic structure and periodic variations, chemical bonding, and molecular shape and polarity, and how these conceptual frameworks influence their quality of explanations and ability to shift among chemical representations. This study employed a purposeful sampling…

  10. Hybrid Physical Chemical Vapor Deposition of Superconducting Magnesium Diboride Coatings for Large Scale Radio Frequency Cavities

    Science.gov (United States)

    Lee, Namhoon; Withanage, Wenura; Tan, Teng; Wolak, Matthaeus; Xi, Xiaoxing

    2016-03-01

    Magnesium diboride (MgB2) is considered to be a great candidate for next generation superconducting radio frequency (SRF) cavities due to its higher critical temperature Tc (40 K) and increased thermodynamic critical field Hc compared to other conventional superconductors. These properties significantly reduce the BCS surface resistance (RsBCS)and residual resistance (Rres) according to theoretical studies and suggest the possibility of an enhanced accelerating field (Eacc) . We have investigated the possibility of coating the inner surface of a 3 GHz SRF cavity with MgB2 by using a hybrid physical-vapor deposition (HPCVD) system which was modified for this purpose. To simulate a real 3 GHz SRF cavity, a stainless steel mock cavity has been employed for the study. The film quality was characterized on small substrates that were placed at selected locations within the cavity. MgB2 films on stainless steel foils, niobium pieces and SiC substrates showed transition temperatures of above 36 K. Dielectric resonance measurements resulted in promising Q values as obtained for the MgB2 films grown on the various substrates. By employing the HPCVD technique, a uniform film was achieved across the cavity interior, demonstrating the feasibility of HPCVD for MgB2 coatings for SRF cavities.

  11. Hillslope chemical weathering across Paraná, Brazil: a data mining-GIS hybrid approach

    Science.gov (United States)

    Iwashita, Fabio; Friedel, Michael J.; Filho, Carlos Roberto de Souza; Fraser, Stephen J.

    2011-01-01

    Self-organizing map (SOM) and geographic information system (GIS) models were used to investigate the nonlinear relationships associated with geochemical weathering processes at local (~100 km2) and regional (~50,000 km2) scales. The data set consisted of 1) 22 B-horizon soil variables: P, C, pH, Al, total acidity, Ca, Mg, K, total cation exchange capacity, sum of exchangeable bases, base saturation, Cu, Zn, Fe, B, S, Mn, gammaspectrometry (total count, potassium, thorium, and uranium) and magnetic susceptibility measures; and 2) six topographic variables: elevation, slope, aspect, hydrological accumulated flux, horizontal curvature and vertical curvature. It is characterized at 304 locations from a quasi-regular grid spaced about 24 km across the state of Paraná. This data base was split into two subsets: one for analysis and modeling (274 samples) and the other for validation (30 samples) purposes. The self-organizing map and clustering methods were used to identify and classify the relations among solid-phase chemical element concentrations and GIS derived topographic models. The correlation between elevation and k-means clusters related the relative position inside hydrologic macro basins, which was interpreted as an expression of the weathering process reaching a steady-state condition at the regional scale. Locally, the chemical element concentrations were related to the vertical curvature representing concave–convex hillslope features, where concave hillslopes with convergent flux tends to be a reducing environment and convex hillslopes with divergent flux, oxidizing environments. Stochastic cross validation demonstrated that the SOM produced unbiased classifications and quantified the relative amount of uncertainty in predictions. This work strengthens the hypothesis that, at B-horizon steady-state conditions, the terrain morphometry were linked with the soil geochemical weathering in a two-way dependent process: the topographic relief was a factor on

  12. The solid phase extraction of some metal ions using palladium nanoparticles attached to silica gel chemically bonded by silica-bonded N-propylmorpholine as new sorbent prior to their determination by flame atomic absorption spectroscopy.

    Science.gov (United States)

    Ghaedi, M; Rezakhani, M; Khodadoust, S; Niknam, K; Soylak, M

    2012-01-01

    In this research at first palladium nanoparticle attached to a new chemically bonded silica gel has been synthesized and has been characterized with different techniques such as X-ray diffraction (XRD), fourier transform infrared (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Then, this new sorbent (chemically modified silica gel with N-propylmorpholine (PNP-SBNPM)) was efficiently used for preconcentration of some metal ions in various food samples. The influence of effective variables including mass of sorbent, flow rate, pH of sample solutions and condition of eluent such as volume, type and concentration on the recoveries of understudy metal ions were investigated. Following the optimization of variables, the interfering effects of some foreign ions on the preconcentration and determination of the investigated metal ions described. At optimum values of variables, all investigated metal ions were efficiently recovered with efficiency more than 95%, relative standard deviation (RSD) between 2.4 and 2.8, and detection limit in the range of 1.4-2.7 ng mL⁻¹. The present method is simple and rapidly applicable for the determination of the understudied metal ions (ng mL⁻¹) in different natural food samples.

  13. The Solid Phase Extraction of Some Metal Ions Using Palladium Nanoparticles Attached to Silica Gel Chemically Bonded by Silica-Bonded N-Propylmorpholine as New Sorbent prior to Their Determination by Flame Atomic Absorption Spectroscopy

    Directory of Open Access Journals (Sweden)

    M. Ghaedi

    2012-01-01

    Full Text Available In this research at first palladium nanoparticle attached to a new chemically bonded silica gel has been synthesized and has been characterized with different techniques such as X-ray diffraction (XRD, fourier transform infrared (FT-IR, transmission electron microscopy (TEM, and scanning electron microscopy (SEM. Then, this new sorbent (chemically modified silica gel with N-propylmorpholine (PNP-SBNPM was efficiently used for preconcentration of some metal ions in various food samples. The influence of effective variables including mass of sorbent, flow rate, pH of sample solutions and condition of eluent such as volume, type and concentration on the recoveries of understudy metal ions were investigated. Following the optimization of variables, the interfering effects of some foreign ions on the preconcentration and determination of the investigated metal ions described. At optimum values of variables, all investigated metal ions were efficiently recovered with efficiency more than 95%, relative standard deviation (RSD between 2.4 and 2.8, and detection limit in the range of 1.4–2.7 ng mL−1. The present method is simple and rapidly applicable for the determination of the understudied metal ions (ng mL−1 in different natural food samples.

  14. Structural, quantum chemical, vibrational and thermal studies of a hydrogen bonded zwitterionic co-crystal (nicotinic acid: pyrogallol)

    Science.gov (United States)

    Prabha, E. Arockia Jeya Yasmi; Kumar, S. Suresh; Athimoolam, S.; Sridhar, B.

    2017-02-01

    In the present work, a new co-crystal of nicotinic acid with pyrogallol (NICPY) has been grown in the zwitterionic form and the corresponding structural, vibrational, thermal, solubility and anti-cancer characteristics have been reported. The single crystal X-ray diffraction analysis confirms that the structural molecular packing of the crystal stabilized through N-H⋯O and O-H⋯O hydrogen bond. The stabilization energy of the hydrogen bond motifs were calculated in the solid state. Vibrational spectral studies such as Fourier transform-infrared (FT-IR) and FT-Raman were adopted to understand the zwitterionic co-crystalline nature of the compound, which has been compared with theoretically calculated vibrational frequencies. The thermal stability of the grown co-crystal was analyzed by TG/DTA study. The solubility of the NICPY co-crystal was investigated in water at different temperature and compared with that of the nicotinic acid, which is the parent compound of NICPY co-crystal. The grown crystals were treated with human cervical cancer cell line (HeLa) to analyze the cytotoxicity of NICPY crystals and compared with the parent compound, which shows that NICPY has moderate activity against human cervical cancer cell line.

  15. Spectroscopic elucidation of energy transfer in hybrid inorganic-biological organisms for solar-to-chemical production.

    Science.gov (United States)

    Kornienko, Nikolay; Sakimoto, Kelsey K; Herlihy, David M; Nguyen, Son C; Alivisatos, A Paul; Harris, Charles B; Schwartzberg, Adam; Yang, Peidong

    2016-10-18

    The rise of inorganic-biological hybrid organisms for solar-to-chemical production has spurred mechanistic investigations into the dynamics of the biotic-abiotic interface to drive the development of next-generation systems. The model system, Moorella thermoacetica-cadmium sulfide (CdS), combines an inorganic semiconductor nanoparticle light harvester with an acetogenic bacterium to drive the photosynthetic reduction of CO2 to acetic acid with high efficiency. In this work, we report insights into this unique electrotrophic behavior and propose a charge-transfer mechanism from CdS to M. thermoacetica Transient absorption (TA) spectroscopy revealed that photoexcited electron transfer rates increase with increasing hydrogenase (H2ase) enzyme activity. On the same time scale as the TA spectroscopy, time-resolved infrared (TRIR) spectroscopy showed spectral changes in the 1,700-1,900-cm(-1) spectral region. The quantum efficiency of this system for photosynthetic acetic acid generation also increased with increasing H2ase activity and shorter carrier lifetimes when averaged over the first 24 h of photosynthesis. However, within the initial 3 h of photosynthesis, the rate followed an opposite trend: The bacteria with the lowest H2ase activity photosynthesized acetic acid the fastest. These results suggest a two-pathway mechanism: a high quantum efficiency charge-transfer pathway to H2ase generating H2 as a molecular intermediate that dominates at long time scales (24 h), and a direct energy-transducing enzymatic pathway responsible for acetic acid production at short time scales (3 h). This work represents a promising platform to utilize conventional spectroscopic methodology to extract insights from more complex biotic-abiotic hybrid systems.

  16. De Novo Assembly and Transcriptome Analysis of Wheat with Male Sterility Induced by the Chemical Hybridizing Agent SQ-1.

    Directory of Open Access Journals (Sweden)

    Qidi Zhu

    Full Text Available Wheat (Triticum aestivum L., one of the world's most important food crops, is a strictly autogamous (self-pollinating species with exclusively perfect flowers. Male sterility induced by chemical hybridizing agents has increasingly attracted attention as a tool for hybrid seed production in wheat; however, the molecular mechanisms of male sterility induced by the agent SQ-1 remain poorly understood due to limited whole transcriptome data. Therefore, a comparative analysis of wheat anther transcriptomes for male fertile wheat and SQ-1-induced male sterile wheat was carried out using next-generation sequencing technology. In all, 42,634,123 sequence reads were generated and were assembled into 82,356 high-quality unigenes with an average length of 724 bp. Of these, 1,088 unigenes were significantly differentially expressed in the fertile and sterile wheat anthers, including 643 up-regulated unigenes and 445 down-regulated unigenes. The differentially expressed unigenes with functional annotations were mapped onto 60 pathways using the Kyoto Encyclopedia of Genes and Genomes database. They were mainly involved in coding for the components of ribosomes, photosynthesis, respiration, purine and pyrimidine metabolism, amino acid metabolism, glutathione metabolism, RNA transport and signal transduction, reactive oxygen species metabolism, mRNA surveillance pathways, protein processing in the endoplasmic reticulum, protein export, and ubiquitin-mediated proteolysis. This study is the first to provide a systematic overview comparing wheat anther transcriptomes of male fertile wheat with those of SQ-1-induced male sterile wheat and is a valuable source of data for future research in SQ-1-induced wheat male sterility.

  17. NMR properties of hydrogen-bonded glycine cluster in gas phase

    Science.gov (United States)

    Carvalho, Jorge R.; da Silva, Arnaldo Machado; Ghosh, Angsula; Chaudhuri, Puspitapallab

    2016-11-01

    Density Functional Theory (DFT) calculations have been performed to study the effect of the hydrogen bond formation on the Nuclear Magnetic Resonance (NMR) parameters of hydrogen-bonded clusters of glycine molecules in gas-phase. DFT predicted isotropic chemical shifts of H, C, N and O of the isolated glycine with respect to standard reference materials are in reasonable agreement with available experimental data. The variations of isotropic and anisotropic chemical shifts for all atoms constituting these clusters containing up to four glycine molecules have been investigated systematically employing gradient corrected hybrid B3LYP functional with three different types of extended basis sets. The clusters are mainly stabilized by a network of strong hydrogen bonds among the carboxylic (COOH) groups of glycine monomers. The formation of hydrogen bond influences the molecular structure of the clusters significantly which, on the other hand, gets reflected in the variations of NMR properties. The carbon (C) atom of the sbnd COOH group, the bridging hydrogen (H) and the proton-donor oxygen (O) atom of the Osbnd H bond suffer downfield shift due to the formation of hydrogen bond. The hydrogen bond lengths and the structural complexity of the clusters are found to vary with the number of participating monomers. A direct correlation between the hydrogen bond length and isotropic chemical shift of the bridging hydrogen is observed in all cases. The individual variations of the principal axis elements in chemical shift tensor provide additional insight about the different nature of the monomers within the cluster.

  18. [Effect of surface pretreatment with chemical etchants on bond strength between a silicone-based resilient liner and denture base resin].

    Science.gov (United States)

    Zhang, Ying; Zhang, Huai-qin; Ma, Jun-chi; Jin, Si-yuan

    2011-12-01

    To evaluate the effect of denture base resin surface pretreatment with chemical etchants on microleakage and bond strength between silicone-based resilient liner and denture base resin. The initial bending strength of denture base resin after surface pretreatment was also examined. Thirty-six polymethyl methacrylate (PMMA) denture base resin blocks (30 mm × 30 mm × 2 mm) were prepared and divided into three groups: group acetone, group methyl methy acrylate (MMA) and group control. Subsequently, a 2 mm silicone-based resilient liner was applied between every two blocks. After 5000 cycles in the thermal cycler (5 and 55°C), they were immersed in the (131) I solution for 24 hours and γ-ray counts were measured. Another 36 PMMA resin blocks (30 mm × 10 mm × 7.5 mm) were prepared. The blocks were divided into three groups and treated as mentioned above. A 3 mm silicone-based resilient liner was applied between every two blocks. After 5000 thermal cycles, tensile bond strength of the sample was measured in a universal testing machine. Another 18 PMMA resin blocks (65 mm × 10 mm × 3.3 mm) were prepared. They were divided into 3 groups and treated in the same way. After an adhesive was applied, the bending strength was measured with three-piont bending test. Two experimental groups showed lower microleakage (520.0 ± 562.2 and 493.5 ± 447.9) and higher tensile bond strength [(1.5 ± 0.4) and (1.4 ± 0.5) MPa] than the group control [microleakage: (1369.5 ± 590.2); tensile bond strength: (0.9 ± 0.2) MPa, P 0.05). There was no statistically significant difference in bending strength among the three groups (P > 0.05). Treating the denture base resin surface with acetone and MMA decreased the microleakage, increased the tensile bond strength between the two materials and did not make the initial bending strength of denture base resin decline.

  19. Hydrogen bond driven chemical reactions: Beckmann rearrangement of cyclohexanone oxime into epsilon-caprolactam in supercritical water.

    Science.gov (United States)

    Boero, Mauro; Ikeshoji, Tamio; Liew, Chee Chin; Terakura, Kiyoyuki; Parrinello, Michele

    2004-05-26

    Recent experiments have shown that supercritical water (SCW) has the ability to accelerate and make selective synthetic organic reactions, thus replacing the common but environmentally harmful acid and basic catalysts. In an attempt to understand the intimate mechanism behind this observation, we analyze, via first-principles molecular dynamics, the Beckmann rearrangement of cyclohexanone oxime into epsilon-caprolactam in supercritical water, for which accurate experimental evidence has been reported. Differences in the wetting of the hydrophilic parts of the solute, enhanced by SCW, and the disrupted hydrogen bond network are shown to be crucial in triggering the reaction and in making it selective. Furthermore, the enhanced concentrations of H(+) in SCW play an important role in starting the reaction.

  20. New sol–gel refractory coatings on chemically-bonded sand cores for foundry applications to improve casting surface quality

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Poulsen, T.; Stage, R.K.

    2011-01-01

    Foundry refractory coatings protect bonded sand cores and moulds from producing defective castings during the casting process by providing a barrier between the core and the liquid metal. In this study, new sol–gel refractory coating on phenolic urethane cold box (PUCB) core was examined....... The coating density, viscosity, moisture content and wet and dry weight of the coating were evaluated on cores that had been coated at three different dip-coating times. The coating coverage, surface appearance and depth of penetration into the cores were examined with a Stereomicroscope. Gray iron castings...... were produced with sol-gel coated and uncoated cores and the results were related to the coating properties. The casting results were also compared with castings made with cores coated with commercial alcohol-based and water-based foundry coatings. The analyses show that castings produced with sol...

  1. Stereocontrolled Synthesis of β-Lactams within [2]Rotaxanes: Showcasing the Chemical Consequences of the Mechanical Bond.

    Science.gov (United States)

    Martinez-Cuezva, Alberto; Lopez-Leonardo, Carmen; Bautista, Delia; Alajarin, Mateo; Berna, Jose

    2016-07-20

    The intramolecular cyclization of N-benzylfumaramide [2]rotaxanes is described. The mechanical bond of these substrates activates this transformation to proceed in high yields and in a regio- and diastereoselective manner, giving interlocked 3,4-disubstituted trans-azetidin-2-ones. This activation effect markedly differs from the more common shielding protection of threaded functions by the macrocycle, in this case promoting an unusual and disfavored 4-exo-trig ring closure. Kinetic and synthetic studies allowed us to delineate an advantageous approach toward β-lactams based on a two-step, one-pot protocol: an intramolecular ring closure followed by a thermally induced dethreading step. The advantages of carrying out this cyclization in the confined space of a benzylic amide macrocycle are attributed to its anchimeric assistance.

  2. Development of a continuum/rarefied hybrid scheme for flows with thermal and chemical non-equilibrium

    Science.gov (United States)

    Michaelis, Christopher Harold

    2001-07-01

    The motion of a gas may be studied from the microscopic or macroscopic point of view. At the microscopic level, molecules are constantly moving and colliding, and occasionally reacting to form new species. The accepted model for describing gases at the microscopic level is the Boltzmann equation. In contrast, macroscopic models rely on the conservation laws, combined with constitutive relations, which approximate the molecular relaxation in a gas. The resulting set of equations, called the Navier- Stokes equations, represent an approximation to the Boltzmann equation for small non-equilibrium. For flows that are sufficiently rarefied, the Navier- Stokes equations no longer represent an accurate approximation of the Boltzmann equation. Numerical solutions of the Boltzmann equation may be obtained through the direct simulation of molecular motion. Such approaches are termed Monte Carlo, or particle methods. In principle, particle methods can be used to simulate all flows, regardless of the degree of non-equilibrium. There are many instances where neither approach is ideal. One such example is the reentry of a blunt body through the atmosphere. Ahead of the body, there is a very strong shock wave that cannot be adequately modeled by the Navier-Stokes equations, due to the degree of non- equilibrium. At the surface of the blunt body, the temperature is substantially colder than the surrounding flow, resulting in a large increase in the density next to the surface. In this region, where the flow is near- continuum, particle methods are not computationally efficient. A numerical method that utilizes the Navier-Stokes equations in regions of near-continuum flow and a particle method everywhere else is ideal. In this study, a hybrid scheme, for the efficient numerical simulation of flows with thermal and chemical non-equilibrium, is successfully demonstrated. The hybrid method was applied to extreme, high Mach number flows, where vibrational and chemical relaxation are

  3. “劲润”牙本质保护膜的牙本质粘结性能探讨%Research of dentin bond strength of resin coating material-Hybrid Coat

    Institute of Scientific and Technical Information of China (English)

    周秦; 白乐康; 逯宜; 刘越胜; 牛林

    2013-01-01

    目的:探讨“劲润”牙本质保护膜(Hybrid Coat,HyC)的牙本质粘结性能.方法:选取A组(HyC)和其他3组不同类型的牙本质粘结剂:B组(G-Bond)、C组(Mega Bond)和D组(Single Bond),比较其对牛牙牙本质的剪切粘结强度,并用实体显微镜观察粘结界面断裂模式.各组试料数分别为n=10,结果通过Tukey-Kramer(P<0.05)进行统计学分析.结果:B、C、D组均显示了较大的粘结强度,3组之间无统计学差异.A组(HyC)显示了较低的粘结强度,约10.08MPa,与其他3组之间存在显著性差异.断裂模式显示,A组(HyC)以界面破坏为主,而其他3组以凝集破坏和混合破坏为主.结论:本研究结果提示,“劲润”牙本质保护膜(HyC)的粘结强度弱于其他3组牙本质粘结剂.为了保证HyC长期稳定的防过敏效果及粘结性能,在今后的研究中有必要进一步探讨如何提高HyC的牙本质粘结性能.%Objective To evaluate the bond strength of resin coating material of Hybrid Coat (HyC) to dentin. Methods A group (HyC) and other three kinds of dentin adhesives,B group (G-Bond),C group (Mega Bond) and D group (Single Bond) were selected and applied to bovine teeth according to manufacturers' instructions.The shear bond strength of each specimen was measured and analyzed with Tukey-Kramer Test (p<0.05).Stereomicroscope was used to observe the fracture modes. Results B,C and D groups showed higher bond strength,but there was not any significant difference among them.A group (HyC) showed the lowest strength of about 10.08 MPa,and there was significant difference between A and the other three groups. Stereomicroscope examination indicated that the adhesive failure was the most mode of fracture in A group and cohesive failure and mixed failure were the main mode of fracture in B,C and D groups. Conclusion The three kinds of dentin bond agents showed higher shear bond strength than HyC.lt is necessary to enhance the bond strength of HyC to dentin in the

  4. Theoretical study of ZnO adsorption and bonding on Al2O3 (0001) surface

    Institute of Scientific and Technical Information of China (English)

    LI Yanrong; YANG Chun; XUE Weidong; LI Jinshan; LIU Yonghua

    2004-01-01

    ZnO adsorption on sapphire (0001) surface is theoretically calculated by using a plane wave ultrasoft pseudo-potential method based on ab initio molecular dynamics. The results reveal that the surface relaxation in the first layer Al-O is reduced, even eliminated after the surface adsorption of ZnO, and the chemical bonding energy is 434.3(±38.6) kJ·mol-1. The chemical bond of ZnO (0.185 ± 0.01 nm) has a 30° angle away from the adjacent Al-O bond, and the stable chemical adsorption position of the Zn is deflected from the surface O-hexagonal symmetry with an angle of about 30°. The analysis of the atomic populations, density of state and bonding electronic density before and after the adsorption indicates that the chemical bond formed by the O2- of the ZnO and the surface Al3+ has a strong ionic bonding characteristic, while the chemical bond formed by the Zn2+ and the surface O2- has an obvious covalent characteristic, which comes mainly from the hybridization of the Zn 4s and the O 2p and partially from that of the Zn 3d and the O 2p.

  5. An Effective Hamiltonian Molecular Orbital-Valence Bond (MOVB) Approach for Chemical Reactions Applied to the Nucleophilic Substitution Reaction of Hydrosulfide Ion and Chloromethane.

    Science.gov (United States)

    Song, Lingchun; Mo, Yirong; Gao, Jiali

    2009-01-01

    An effective Hamiltonian mixed molecular orbital and valence bond (EH-MOVB) method is described to obtain an accurate potential energy surface for chemical reactions. Building upon previous results on the construction of diabatic and adiabatic potential surfaces using ab initio MOVB theory, we introduce a diabatic-coupling scaling factor to uniformly scale the ab initio off-diagonal matrix element H(12) such that the computed energy of reaction from the EH-MOVB method is in agreement with the target value. The scaling factor is very close to unity, resulting in minimal alteration of the potential energy surface of the original MOVB model. Furthermore, the relative energy between the reactant and product diabatic states in the EH-MOVB method can be improved to match the experimental energy of reaction. A key ingredient in the EH-MOVB theory is that the off-diagonal matrix elements are functions of all degrees of freedom of the system and the overlap matrix is explicitly evaluated. The EH-MOVB method has been applied to the nucleophilic substitution reaction between hydrosulfide and chloromethane to illustrate the methodology and the results were matched to reproduce the results from ab initio valence bond self-consistent valence bond (VBSCF) calculations. The diabatic coupling (the off-diagonal matrix element in the generalized secular equation) has small variations along the minimum energy reaction path in the EH-MOVB model, whereas it shows a maximum value at the transition state and has nearly zero values in the regions of the ion-dipole complexes from VBSCF calculations. The difference in the diabatic coupling stabilization is attributed to the large overlap integral in the computationally efficient MOVB method.

  6. Hybrid bio-photo-electro-chemical cells for solar water splitting

    Science.gov (United States)

    Pinhassi, Roy I.; Kallmann, Dan; Saper, Gadiel; Dotan, Hen; Linkov, Artyom; Kay, Asaf; Liveanu, Varda; Schuster, Gadi; Adir, Noam; Rothschild, Avner

    2016-08-01

    Photoelectrochemical water splitting uses solar power to decompose water to hydrogen and oxygen. Here we show how the photocatalytic activity of thylakoid membranes leads to overall water splitting in a bio-photo-electro-chemical (BPEC) cell via a simple process. Thylakoids extracted from spinach are introduced into a BPEC cell containing buffer solution with ferricyanide. Upon solar-simulated illumination, water oxidation takes place and electrons are shuttled by the ferri/ferrocyanide redox couple from the thylakoids to a transparent electrode serving as the anode, yielding a photocurrent density of 0.5 mA cm-2. Hydrogen evolution occurs at the cathode at a bias as low as 0.8 V. A tandem cell comprising the BPEC cell and a Si photovoltaic module achieves overall water splitting with solar to hydrogen efficiency of 0.3%. These results demonstrate the promise of combining natural photosynthetic membranes and man-made photovoltaic cells in order to convert solar power into hydrogen fuel.

  7. Controlling Botrytis elliptica Leaf Blight on Hybrid Lilies through the Application of Convergent Chemical X-ray Irradiation

    Directory of Open Access Journals (Sweden)

    Sung-Jun Hong

    2016-04-01

    Full Text Available X-ray irradiation with convergent chemicals such as nano-silver particles or sodium dichloroisocyanurate (NaDCC has been used to control leaf blight on cut lilies. The oriental hybrid lily cultivars Siberia, Le Reve, and Sorbonne were irradiated five times by 200 Gy of X-rays in 2014. In 2015, Siberia and Sorbonne were irradiated three times by 150 Gy of X-rays. After artificial infection with Botrytis elliptica on the leaves and petals of cut lilies, this study used convergent chemical X-ray irradiation of 200 Gy or 150 Gy. Leaf and petal blight was measured in terms of incidence and severity at 8 days after infection using total 552 cuttings. Results indicate that the treatments of X-ray irradiation and NaDCC in 2014 and 2015 slightly decreased the severity of petal blight on Siberia and Sorbonne. However, the results were not significant and severity did not decrease as NaDCC concentration increased. Vase-life was observed separately after X-ray irradiation of 270 cut lilies in 2014 and 108 cut lilies in 2015. Chlorophyll content was not affected by either 200 Gy or 150 Gy of X-rays. The number of days of fully opened flowers at Siberia of 150 Gy and Le Revu of 200 Gy increased by 1–2 days. In addition, the relative fresh weights of the X-rayed flowers were 10% drier than the non-irradiated controls. Overall, leaf blight control by X-ray was inferior to the control by gamma rays, and petal color was bleached in Sorbonne and Le Reve cvs. by 150 Gy of X-rays.

  8. Effect of Si-H bond on the gas-phase chemistry of trimethylsilane in the hot wire chemical vapor deposition process.

    Science.gov (United States)

    Shi, Y J; Li, X M; Toukabri, R; Tong, L

    2011-09-22

    The effect of the Si-H bond on the gas-phase reaction chemistry of trimethylsilane in the hot-wire chemical vapor deposition (HWCVD) process has been studied by examining its decomposition on a hot tungsten filament and the secondary gas-phase reactions in a reactor using a soft laser ionization source coupled with mass spectrometry. Trimethylsilane decomposes on the hot filament via Si-H and Si-CH(3) bond cleavages. A short-chain mechanism is found to dominate in the secondary reactions in the reactor. It has been shown that the hydrogen abstractions of both Si-H and C-H occur simultaneously, with the abstraction of Si-H being favored. Tetramethylsilane and hexamethyldisilane are the two major products formed from the radical recombination reactions in the termination steps. Three methyl-substituted disilacyclobutane molecules, i.e., 1,3-dimethyl-1,3-disilacyclobutane, 1,1,3-trimethyl-1,3-disilacyclobutane, and 1,1,3,3-tetramethyl-1,3-disilacyclobutane are also produced in reactor from the cycloaddition reactions of methyl-substituted silene species. Compared to tetramethylsilane and hexamethyldisilane, a common feature with trimethylsilane is that the short-chain mechanism still dominates. However, a more active involvement of the reactive silene intermediates has been found with trimethylsilane.

  9. Shear bond strength evaluation of chemically-cured and light-cured orthodontic adhesives after enamel deproteinization with 5.25% sodium hypochlorite

    Science.gov (United States)

    Salim, J. C.; Krisnawati; Purbiati, M.

    2017-08-01

    This study aimed to assess the effect of enamel deproteinization with 5.25% sodium hypochlorite (NaOCl) before etching on the shear bond strength (SBS) of Unite (UN; 3M Unitek) and Xihu-BIOM adhesive (XB). Fifty-two maxillary first premolars were divided into four groups: (1) UN and (2) XB according to manufacturer’s recommendation and (3) UN and (4) XB deproteinized with 5.25% NaOCl. Brackets were bonded, and a mechanical test was performed using a universal testing machine. The mean SBS value for groups A1, A2, B1, and B2 was 13.51 ± 2.552, 14.36 ± 2.902, 16.43 ± 2.615, and 13.05 ± 2.348 MPa, respectively. A statistically significant difference in SBSs was observed between chemically cured groups and between group B (p adhesive groups and between group A (p > 0.05). NaOCl enamel deproteinization before acid etching has a significant effect on the SBS of Unite adhesive, but not on that of the Xihu-BIOM adhesive. Furthermore, a significant difference in the SBS of Unite and Xihu-BIOM adhesives within the enamel deproteinization group was observed in this study.

  10. Comparison of the Shear Bond Strength of Light-cured and Chemically-cured Resin Adhesive%光固化和化学固化树脂粘接剂剪切强度的对比研究

    Institute of Scientific and Technical Information of China (English)

    张隆祺; 王野平

    2001-01-01

    Objective To compare the shear bond strength of light-cured and chemically-cured resin adhesive. Methods Twenty recently extracted human premolars were randomly divided into two groups of 10 each.: Group A, using the chemically-cured resin adhesive (Jing Jinenamel adhesive) and Group B, using the light-cured resin adhesive (Transbond XT,3M Unitek). The brackets were bonded to prepared enamel surfaces and the samples were placed in a water bath at 37℃ for 24 hours, then measured the shear bond strength and assessed the remaining adhesive after debonded. Results The shear bond strength and assessing the remaining adhesive after debonded both had no statistical significanct difference between two adhesives. Conclusion The light-cured and the chemically-cured resin adhesive both have strong bond strength, but the light-cured resin adhesive has the advantage to offer more sufficient time for positioning and bonding the brackets, so it is recommended for using.%-05)。结论光固化和化学固化树脂粘接剂均具有较强的粘接强度,但光固化树脂粘接剂能够为托槽的定位和粘接提供充足的时间,推荐使用。

  11. Hybrid quantum and classical methods for computing kinetic isotope effects of chemical reactions in solutions and in enzymes.

    Science.gov (United States)

    Gao, Jiali; Major, Dan T; Fan, Yao; Lin, Yen-Lin; Ma, Shuhua; Wong, Kin-Yiu

    2008-01-01

    A method for incorporating quantum mechanics into enzyme kinetics modeling is presented. Three aspects are emphasized: 1) combined quantum mechanical and molecular mechanical methods are used to represent the potential energy surface for modeling bond forming and breaking processes, 2) instantaneous normal mode analyses are used to incorporate quantum vibrational free energies to the classical potential of mean force, and 3) multidimensional tunneling methods are used to estimate quantum effects on the reaction coordinate motion. Centroid path integral simulations are described to make quantum corrections to the classical potential of mean force. In this method, the nuclear quantum vibrational and tunneling contributions are not separable. An integrated centroid path integral-free energy perturbation and umbrella sampling (PI-FEP/UM) method along with a bisection sampling procedure was summarized, which provides an accurate, easily convergent method for computing kinetic isotope effects for chemical reactions in solution and in enzymes. In the ensemble-averaged variational transition state theory with multidimensional tunneling (EA-VTST/MT), these three aspects of quantum mechanical effects can be individually treated, providing useful insights into the mechanism of enzymatic reactions. These methods are illustrated by applications to a model process in the gas phase, the decarboxylation reaction of N-methyl picolinate in water, and the proton abstraction and reprotonation process catalyzed by alanine racemase. These examples show that the incorporation of quantum mechanical effects is essential for enzyme kinetics simulations.

  12. Effects of combination modes of favorable growth unit of Al(OH)3 crystals precipitating on Van der Waals and chemical bond force

    Institute of Scientific and Technical Information of China (English)

    WU Zheng-ping; CHEN Qi-yuan; YIN Zhou-lan; LI Jie

    2005-01-01

    The dipole moment, total energy, atomic charge, orbital population and orbital energy of four representative combination models of the favorable growth unit Al6 (OH)18 (H2O)6 of Al(OH)3 crystals precipitating are calculated by ab initio at RHF/STO-3G, RHF/3-21G, RHF/6-31G levels and DFT at RB3LYP/STO-3G, RB3LYP/3-21G, RB3LYP/6-31G levels with Dipole & Sphere solvent model. The effect of various combination models on Van der Waals force is analyzed using dipole moment and molecular radius, and that on chemical bond force is analyzed using total energy, orbital population and orbital energy.

  13. Probing the structures and chemical bonding of boron-boronyl clusters using photoelectron spectroscopy and computational chemistry: B4(BO)(n)- (n = 1-3).

    Science.gov (United States)

    Chen, Qiang; Zhai, Hua-Jin; Li, Si-Dian; Wang, Lai-Sheng

    2012-07-28

    The electronic and structural properties of a series of boron oxide clusters, B(5)O(-), B(6)O(2)(-), and B(7)O(3)(-), are studied using photoelectron spectroscopy and density functional calculations. Vibrationally resolved photoelectron spectra are obtained, yielding electron affinities of 3.45, 3.54, and 4.94 eV for the corresponding neutrals, B(5)O, B(6)O(2), and B(7)O(3), respectively. Structural optimizations show that these oxide clusters can be formulated as B(4)(BO)(n)(-) (n = 1-3), which involve boronyls coordinated to a planar rhombic B(4) cluster. Chemical bonding analyses indicate that the B(4)(BO)(n)(-) clusters are all aromatic species with two π electrons.

  14. Probing the structures and chemical bonding of boron-boronyl clusters using photoelectron spectroscopy and computational chemistry: B4(BO)n- (n = 1-3)

    Science.gov (United States)

    Chen, Qiang; Zhai, Hua-Jin; Li, Si-Dian; Wang, Lai-Sheng

    2012-07-01

    The electronic and structural properties of a series of boron oxide clusters, B5O-, B6O2-, and B7O3-, are studied using photoelectron spectroscopy and density functional calculations. Vibrationally resolved photoelectron spectra are obtained, yielding electron affinities of 3.45, 3.54, and 4.94 eV for the corresponding neutrals, B5O, B6O2, and B7O3, respectively. Structural optimizations show that these oxide clusters can be formulated as B4(BO)n- (n = 1-3), which involve boronyls coordinated to a planar rhombic B4 cluster. Chemical bonding analyses indicate that the B4(BO)n- clusters are all aromatic species with two π electrons.

  15. Towards Ideal NOx and CO2 Emission Control Technology for Bio-Oils Combustion Energy System Using a Plasma-Chemical Hybrid Process

    Science.gov (United States)

    Okubo, M.; Fujishima, H.; Yamato, Y.; Kuroki, T.; Tanaka, A.; Otsuka, K.

    2013-03-01

    A pilot-scale low-emission boiler system consisting of a bio-fuel boiler and plasma-chemical hybrid NOx removal system is investigated. This system can achieve carbon neutrality because the bio-fuel boiler uses waste vegetable oil as one of the fuels. The plasma-chemical hybrid NOx removal system has two processes: NO oxidation by ozone produced from plasma ozonizers and NO2 removal using a Na2SO3 chemical scrubber. Test demonstrations of the system are carried out for mixed oils (mixture of A-heavy oil and waste vegetable oil). Stable combustion is achieved for the mixed oil (20 - 50% waste vegetable oil). Properties of flue gas—e.g., O2, CO2 and NOx—when firing mixed oils are nearly the same as those when firing heavy oil for an average flue gas flow rate of 1000 Nm3/h. NOx concentrations at the boiler outlet are 90 - 95 ppm. Furthermore, during a 300-min continuous operation when firing 20% mixed oil, NOx removal efficiency of more than 90% (less than 10 ppm NOx emission) is confirmed. In addition, the CO2 reduction when heavy oil is replaced with waste vegetable oil is estimated. The system comparison is described between the plasma-chemical hybrid NOx removal and the conventional technology.

  16. Synthesis, structure, spectral properties and DFT quantum chemical calculations of 4-aminoazobenzene dyes. Effect of intramolecular hydrogen bonding on photoisomerization

    Science.gov (United States)

    Georgiev, Anton; Bubev, Emil; Dimov, Deyan; Yancheva, Denitsa; Zhivkov, Ivaylo; Krajčovič, Jozef; Vala, Martin; Weiter, Martin; Machkova, Maria

    2017-03-01

    In this paper three different "push-pull" 4-aminoazobenzene dyes have been synthesized in order to characterize their photochromic behavior in different solvents. The molecular geometry was optimized by DFT/B3LYP functional combined with the standard 6-31 + G(d,p) basis set for trans (E) and cis (Z) isomers and the energy levels of HOMO and LUMO frontier orbitals were computed using IEFPCM solvation in CHCl3 and DMF. The calculated results were compared to the experimental optical band gap and HOMO values of cyclic voltammetry. The intramolecular six-membered hydrogen bond was formed in both isomers of the synthesized dyes. The thermodynamic parameters such as total electronic energy E (RB3LYP), enthalpy H298 (sum of electronic and thermal enthalpies), free Gibbs energy G298 (sum of electronic and thermal free Gibbs energies) and dipole moment μ were computed for trans (E) and cis (Z) isomers in order to estimate the ΔEtrans → cis, Δμtrans → cis, ΔHtrans → cis, ΔGtrans → cis and ΔStrans → cis values. The NBO analysis was performed in order to understand the intramolecular charge transfer and energy of resonance stabilization. The solvatochromic shift was evaluated by UV-VIS spectroscopy in CHCl3 (nonpolar), EtOH (polar protic) and DMF (polar aprotic) solvents to determine the electron withdrawing and donating properties of the substituents on electron transitions energy. Through the increasing solvent polarity a strong bathochromic shift is observed. The photoisomerization experiments have been performed in two solvents CHCl3 (nonpolar) and DMF (polar aprotic) by UV light irradiation with λ = 365 nm at equal concentrations and time of illuminations. The electronic spectra were computed by TD-DFT after geometry optimization using IEFPCM solvation in CHCl3 and DMF. The degree of photoisomerization was calculated for the three azo chromophores in both solvents. By using first derivative of the UV-VIS spectra it was possible to resolve the overlapped

  17. Effect of chemically modified silicas on the properties of hybrid gel electrolyte for Li-ion batteries

    Science.gov (United States)

    Walkowiak, Mariusz; Zalewska, Aldona; Jesionowski, Teofil; Waszak, Daniel; Czajka, Bogdan

    The aim of the presented work was to perform a preliminary study the physico-chemical properties of hybrid organic-inorganic gel electrolytes for Li-ion batteries based on the PVdF-HFP polymeric matrix and surface modified fumed silicas. Modifications were done by means of the so-called dry method using seven different silanes differing in the nature of the principal functional group: N-2-(aminoethyl)-3-amino propyltrimethoxysilane, 3-glycidoxypropyltrimetoxysilane, 3-mercaptopropyltrimetoxysilane, n-octyltriethoxysilane, 3-(chloropropyl)trimethoxysilane, 3-methacryloxypropyltrimetoxysilane, vinyltrimethoxysilane. The PVdF-HFP gels were prepared according to the so-called Bellcore process (two-step method). Impact of the silicas surface functionality on the degree of crystallinity of the polymeric membranes was studied using the differential scanning calorimetry technique. Applicability of the prepared gel electrolytes for the Li-ion technology was estimated on the basis of specific conductivity measurements. It was shown that modification of the silica surface by most of the silanes causes an increase in the gel specific conductivity by about two orders of magnitude as compared to gel with unmodified silica.

  18. Effect of chemically modified silicas on the properties of hybrid gel electrolyte for Li-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Walkowiak, Mariusz; Waszak, Daniel; Czajka, Bogdan [Central Laboratory of Batteries and Cells, ul. Forteczna 12, 61-362 Poznan (Poland); Zalewska, Aldona [Warsaw University of Technology, Department of Chemistry, ul. Noakowskiego 3, 00-664 Warsaw (Poland); Jesionowski, Teofil [Poznan University of Technology, Institute of Chemical Technology and Engineering, Pl. Marii Sklodowskiej-Curie 2, 60-965 Poznan (Poland)

    2006-09-13

    The aim of the presented work was to perform a preliminary study the physico-chemical properties of hybrid organic-inorganic gel electrolytes for Li-ion batteries based on the PVdF-HFP polymeric matrix and surface modified fumed silicas. Modifications were done by means of the so-called dry method using seven different silanes differing in the nature of the principal functional group: N-2-(aminoethyl)-3-amino propyltrimethoxysilane, 3-glycidoxypropyltrimetoxysilane, 3-mercaptopropyltrimetoxysilane, n-octyltriethoxysilane, 3-(chloropropyl)trimethoxysilane, 3-methacryloxypropyltrimetoxysilane, vinyltrimethoxysilane. The PVdF-HFP gels were prepared according to the so-called Bellcore process (two-step method). Impact of the silicas surface functionality on the degree of crystallinity of the polymeric membranes was studied using the differential scanning calorimetry technique. Applicability of the prepared gel electrolytes for the Li-ion technology was estimated on the basis of specific conductivity measurements. It was shown that modification of the silica surface by most of the silanes causes an increase in the gel specific conductivity by about two orders of magnitude as compared to gel with unmodified silica. (author)

  19. MgB2UltrathinFilms Fabricated by Hybrid Physical Chemical Vapor Deposition and Subsequent Ion Milling

    Science.gov (United States)

    Acharya, Narendra; Wolak, Matthaeus; Tan, Teng; Cunnane, Daniel; Karasik, Boris; Xi, Xiaoxing

    Hot electron bolometer (HEB) mixers are a great tool for measuring high-resolution spectroscopy at Terahertz frequencies. MgB2offers a higher critical temperature (39 K) compared to commonly used Nb and NbN and boasts a shorter intrinsic electron-phonon relaxation time, giving rise to a broader intermediate frequency (IF) bandwidth. We have fabricated high quality ultrathin MgB2films using hybrid physical-chemical vapor deposition (HPCVD) and employing ion milling to achieve thickness down to 2 nm. The thinnest achieved films show high Tc of 28 K with residual resistivity below 28 µ Ωcm and high critical current Jcof 1x106 A/cm2at 20 K. As a result of the employed low angle ion milling process, the films remain well connected even after being thinned down since the initial thick films offer a better connectivity than as-grown thin films. The established process offers a way to realize MgB2 based HEB mixers of extremely low thickness and therefore small local oscillator power requirements and increased IF bandwidth.

  20. Growth of magnesium diboride films on 2 inch diameter copper discs by hybrid physical–chemical vapor deposition

    Science.gov (United States)

    Withanage, Wenura K.; Xi, X. X.; Nassiri, Alireza; Lee, Namhoon; Wolak, Matthäus A.; Tan, Teng; Welander, Paul B.; Franzi, Matthew; Tantawi, Sami; Kustom, Robert L.

    2017-04-01

    Magnesium diboride (MgB2) coating is a potential candidate to replace bulk niobium (Nb) for superconducting radio frequency cavities due to the appealing superconducting properties of MgB2. MgB2 coating on copper may allow cavity operation near 20–25 K as a result of the high transition temperature (T c) of MgB2 and excellent thermal conductivity of Cu. We have grown MgB2 films on 2 inch diameter Cu discs by hybrid physical–chemical vapor deposition for radio frequency characterization. Structural and elemental analyses showed a uniform MgB2 coating on top of a Mg–Cu alloy layer with occasional intrusion of Mg–Cu alloy regions. High T c values of around 37 K and high critical current density (J c) on the order of 107 A cm‑2 at zero field were observed. Radio frequency measurements at 11.4 GHz confirmed a high T c and showed a quality factor (Q 0) much higher than for Cu and close to that of Nb.

  1. Crystal Engineering for Low Defect Density and High Efficiency Hybrid Chemical Vapor Deposition Grown Perovskite Solar Cells.

    Science.gov (United States)

    Ng, Annie; Ren, Zhiwei; Shen, Qian; Cheung, Sin Hang; Gokkaya, Huseyin Cem; So, Shu Kong; Djurišić, Aleksandra B; Wan, Yangyang; Wu, Xiaojun; Surya, Charles

    2016-12-07

    Synthesis of high quality perovskite absorber is a key factor in determining the performance of the solar cells. We demonstrate that hybrid chemical vapor deposition (HCVD) growth technique can provide high level of versatility and repeatability to ensure the optimal conditions for the growth of the perovskite films as well as potential for batch processing. It is found that the growth ambient and degree of crystallization of CH3NH3PbI3 (MAPI) have strong impact on the defect density of MAPI. We demonstrate that HCVD process with slow postdeposition cooling rate can significantly reduce the density of shallow and deep traps in the MAPI due to enhanced material crystallization, while a mixed O2/N2 carrier gas is effective in passivating both shallow and deep traps. By careful control of the perovskite growth process, a champion device with power conversion efficiency of 17.6% is achieved. Our work complements the existing theoretical studies on different types of trap states in MAPI and fills the gap on the theoretical analysis of the interaction between deep levels and oxygen. The experimental results are consistent with the theoretical predictions.

  2. A Modular Approach to Triazole-Containing Chemical Inducers of Dimerisation for Yeast Three-Hybrid Screening

    Directory of Open Access Journals (Sweden)

    Nicholas J. Westwood

    2013-09-01

    Full Text Available The yeast three-hybrid (Y3H approach shows considerable promise for the unbiased identification of novel small molecule-protein interactions. In recent years, it has been successfully used to link a number of bioactive molecules to novel protein binding partners. However despite its potential importance as a protein target identification method, the Y3H technique has not yet been widely adopted, in part due to the challenges associated with the synthesis of the complex chemical inducers of dimerisation (CIDs. The development of a modular approach using potentially “off the shelf” synthetic components was achieved and allowed the synthesis of a family of four triazole-containing CIDs, MTX-Cmpd2.2-2.5. These CIDs were then compared using the Y3H approach with three of them giving a strong positive interaction with a known target of compound 2, TgCDPK1. These results showed that the modular nature of our synthetic strategy may help to overcome the challenges currently encountered with CID synthesis and should contribute to the Y3H approach reaching its full potential as an unbiased target identification strategy.

  3. Enhanced Electrochemical Performances of Bi2O3/rGO Nanocomposite via Chemical Bonding as Anode Materials for Lithium Ion Batteries.

    Science.gov (United States)

    Deng, Zhuo; Liu, Tingting; Chen, Tao; Jiang, Jiaxiang; Yang, Wanli; Guo, Jun; Zhao, Jianqing; Wang, Haibo; Gao, Lijun

    2017-04-12

    Bismuth oxide/reduced graphene oxide (termed Bi2O3@rGO) nanocomposite has been facilely prepared by a solvothermal method via introducing chemical bonding that has been demonstrated by Raman and X-ray photoelectron spectroscopy spectra. Tremendous single-crystal Bi2O3 nanoparticles with an average size of ∼5 nm are anchored and uniformly dispersed on rGO sheets. Such a nanostructure results in enhanced electrochemical reversibility and cycling stability of Bi2O3@rGO composite materials as anodes for lithium ion batteries in comparison with agglomerated bare Bi2O3 nanoparticles. The Bi2O3@rGO anode material can deliver a high initial capacity of ∼900 mAh/g at 0.1C and shows excellent rate capability of ∼270 mAh/g at 10C rates (1C = 600 mA/g). After 100 electrochemical cycles at 1C, the Bi2O3@rGO anode material retains a capacity of 347.3 mAh/g with corresponding capacity retention of 79%, which is significantly better than that of bare Bi2O3 material. The lithium ion diffusion coefficient during lithiation-delithiation of Bi2O3@rGO nanocomposite has been evaluated to be around ∼10(-15)-10(-16) cm(2)/S. This work demonstrates the effects of chemical bonding between Bi2O3 nanoparticles and rGO substrate on enhanced electrochemical performances of Bi2O3@rGO nanocomposite, which can be used as a promising anode alterative for superior lithium ion batteries.

  4. The effects of reasoning, use of models, sex type, and their interactions on posttest achievement in chemical bonding after constant instruction

    Science.gov (United States)

    Staver, John R.; Halsted, Douglas A.

    The purpose of the authors in this study was to determine the effects of reasoning, use of models during testing, and sex type on posttest achievement in chemical bonding under controlled instruction. Eighty-four high school students taking chemistry were randomly assigned within their classes to models and no models groups for the posttest. Reasoning capabilities were assessed by the Piagetian Logical Operations Test (PLOT) (Staver & Gabel, JRST, Vol. 16, No. 6, 1979), prior to instruction. All students then received the same instruction on chemical bonding which included teacher demonstrations of concepts with three-dimensional molecular models, interspersed teacher questions during the introduction and development of concepts, student manipulation of three-dimensional molecular models during laboratory experiments, and text reading assignments on concepts prior to their instruction in class. The posttest on molecular geometry and shape contained three sections requiring memory and application (Bloom, Taxonomy of educational objective, handbook I: Cognitive domain. New York: David McKay, 1956). Data were analyzed by regression (Nie et al., Statistical package for the social sciences, 2nd ed. New York: McGraw-Hill, 1975). Results indicate that reasoning accounted for a significant portion (p 0.05) portion of the variance on total scores or any section of posttest. The three-way interaction of reasoning, model usage, and sex type accounted for a significant portion (p < 0.05) of the variance in total scores, and in the memory and application sections of the posttest. Discussion focused on the results, conclusions, and implications for science teaching.

  5. A periodic Energy Decomposition Analysis (pEDA) method for the Investigation of Chemical Bonding in Extended Systems

    CERN Document Server

    Raupach, Marc

    2015-01-01

    The development and first applications of a new periodic energy decomposition analysis (pEDA) scheme for extended systems based on the Kohn-Sham approach to density functional theory are described. The pEDA decomposes the binding energy between two fragments (e.g. the adsorption energy of a molecule on a surface) into several well-defined terms: preparation, electrostatic and dispersion interaction, Pauli repulsion and orbital relaxation energies. The pEDA presented here for an AO-based implementation can handle restricted and unrestricted fragments for 0D to 3D systems considering periodic boundary conditions with and without the determination of fragment occupations. For the latter case, reciprocal space sampling is enabled. The new method gives comparable results to established schemes for molecular systems and shows good convergence with respect to the basis set (TZ2P), the integration accuracy and k-space sampling. Four typical bonding scenarios for surface adsorbate complexes were chosen to highlight th...

  6. Chemical bond approach to optical properties of some flash evaporated Se100-XSbX chalcogenide alloys

    Science.gov (United States)

    Muiva, C. M.; Sathiaraj, T. S.; Mwabora, J. M.

    2012-07-01

    Amorphous thin films of Se100 - XSbX (X = 1, 5, 10, 15 and 20) were synthesized by flash evaporation of the premelt quenched bulk samples. The optical properties were investigated from spectrophotometric measurements in the UV-VIS-NIR spectral region using Swanepoel's standard envelope method and related techniques. The optical band gap energy (Egopt) was evaluated from the Wemple-Didomenico (WDD) single oscillator model and Tauc's extrapolation method in the region where the absorption coefficient, α ≥ 104 cm-1. The observed values of Egopt and oscillator energy Eo were found to decrease monotonously with increasing Sb additive. The complex dielectric constant (ɛ), Urbach energy (Eu), optical conductivity (σ), plasma frequency (ωp) and lattice dielectric constant (ɛL) were deduced for each alloy composition. The complex refractive index (n) fitted well to Sellmeier function which can allow extrapolation of n outside the measured spectral range. The observed changes in optical parameters with Sb content were explained on the basis of increased defect states and changes in cohesive energy indicators (average heat of atomization (Hs), mean coordination number and average single bond energy (Hs/).

  7. Chemically fixed p-n heterojunctions for polymer electronics by means of covalent B-F bond formation

    Science.gov (United States)

    Hoven, Corey V.; Wang, Huiping; Elbing, Mark; Garner, Logan; Winkelhaus, Daniel; Bazan, Guillermo C.

    2010-03-01

    Widely used solid-state devices fabricated with inorganic semiconductors, including light-emitting diodes and solar cells, derive much of their function from the p-n junction. Such junctions lead to diode characteristics and are attained when p-doped and n-doped materials come into contact with each other. Achieving bilayer p-n junctions with semiconducting polymers has been hindered by difficulties in the deposition of thin films with independent p-doped and n-doped layers. Here we report on how to achieve permanently fixed organic p-n heterojunctions by using a cationic conjugated polyelectrolyte with fluoride counteranions and an underlayer composed of a neutral conjugated polymer bearing anion-trapping functional groups. Application of a bias leads to charge injection and fluoride migration into the neutral layer, where irreversible covalent bond formation takes place. After the initial charging and doping, one obtains devices with no delay in the turn on of light-emitting electrochemical behaviour and excellent current rectification. Such devices highlight how mobile ions in organic media can open opportunities to realize device structures in ways that do not have analogies in the world of silicon and promise new opportunities for integrating organic materials within technologies now dominated by inorganic semiconductors.

  8. Facile Synthesis of Layer Structured GeP3/C with Stable Chemical Bonding for Enhanced Lithium-Ion Storage

    Science.gov (United States)

    Qi, Wen; Zhao, Haihua; Wu, Ying; Zeng, Hong; Tao, Tao; Chen, Chao; Kuang, Chunjiang; Zhou, Shaoxiong; Huang, Yunhui

    2017-01-01

    Recently, metal phosphides have been investigated as potential anode materials because of higher specific capacity compared with those of carbonaceous materials. However, the rapid capacity fade upon cycling leads to poor durability and short cycle life, which cannot meet the need of lithium-ion batteries with high energy density. Herein, we report a layer-structured GeP3/C nanocomposite anode material with high performance prepared by a facial and large-scale ball milling method via in-situ mechanical reaction. The P-O-C bonds are formed in the composite, leading to close contact between GeP3 and carbon. As a result, the GeP3/C anode displays excellent lithium storage performance with a high reversible capacity up to 1109 mA h g−1 after 130 cycles at a current density of 0.1 A g−1. Even at high current densities of 2 and 5 A g−1, the reversible capacities are still as high as 590 and 425 mA h g−1, respectively. This suggests that the GeP3/C composite is promising to achieve high-energy lithium-ion batteries and the mechanical milling is an efficient method to fabricate such composite electrode materials especially for large-scale application. PMID:28240247

  9. Facile Synthesis of Layer Structured GeP3/C with Stable Chemical Bonding for Enhanced Lithium-Ion Storage

    Science.gov (United States)

    Qi, Wen; Zhao, Haihua; Wu, Ying; Zeng, Hong; Tao, Tao; Chen, Chao; Kuang, Chunjiang; Zhou, Shaoxiong; Huang, Yunhui

    2017-02-01

    Recently, metal phosphides have been investigated as potential anode materials because of higher specific capacity compared with those of carbonaceous materials. However, the rapid capacity fade upon cycling leads to poor durability and short cycle life, which cannot meet the need of lithium-ion batteries with high energy density. Herein, we report a layer-structured GeP3/C nanocomposite anode material with high performance prepared by a facial and large-scale ball milling method via in-situ mechanical reaction. The P-O-C bonds are formed in the composite, leading to close contact between GeP3 and carbon. As a result, the GeP3/C anode displays excellent lithium storage performance with a high reversible capacity up to 1109 mA h g-1 after 130 cycles at a current density of 0.1 A g-1. Even at high current densities of 2 and 5 A g-1, the reversible capacities are still as high as 590 and 425 mA h g-1, respectively. This suggests that the GeP3/C composite is promising to achieve high-energy lithium-ion batteries and the mechanical milling is an efficient method to fabricate such composite electrode materials especially for large-scale application.

  10. Rod like attapulgite/poly(ethylene terephthalate nanocomposites with chemical bonding between the polymer chain and the filler

    Directory of Open Access Journals (Sweden)

    Q. Fu

    2012-08-01

    Full Text Available Poly(ethylene terephthalate (PET nanocomposites containing rod-like silicate attapulgite (AT were prepared via in situ polymerization. It is presented that PET chains identical to the matrix have been successfully grafted onto simple organically pre-modified AT nanorods (MAT surface during the in situ polymerization process. The covalent bonding at the interface was confirmed by Fourier transform infrared spectroscopy (FTIR and thermogravimetric analysis (TGA. The content of grafted PET polymer on the surface of MAT was about 26 wt%. This high grafting density greatly improved the dispersion of fillers, interfacial adhesion as well as the significant confinement of the segmental motion of PET, as compared to the nanocomposites of PET/pristine AT (PET/AT. Owing to the unique interfacial structure in PET/MAT composites, their thermal and mechanical properties have been greatly improved. Compared with neat PET, the elastic modulus and the yield strength of PET/MAT were significantly improved by about 39.5 and 36.8%, respectively, by incorporating only 2 wt % MAT. Our work provides a novel route to fabricate advanced PET nanocomposites using rod-like attapulgite as fillers, which has great potential for industrial applications.

  11. Thermoelectric, electronic, optical and chemical bonding properties of Ba{sub 2}PrRuO{sub 6}: At temperature 7 K and 150 K

    Energy Technology Data Exchange (ETDEWEB)

    Reshak, A.H. [New Technologies-Research Center, University of West Bohemia, Univerzitni 8, 306 14 Pilsen (Czech Republic); Center of Excellence Geopolymer and Green Technology, School of Material Engineering, University Malaysia Perlis, Kangar, Perlis 01007 Malaysia (Malaysia); Khan, Wilayat, E-mail: walayat76@gmail.com [New Technologies-Research Center, University of West Bohemia, Univerzitni 8, 306 14 Pilsen (Czech Republic)

    2015-01-15

    Highlights: • DFT-FPLAPW method used for calculating the electronic structure. • The Fermi surface of BPRO (7 K and 150 K) is also calculated. • The complex dielectric function has been calculated. • Thermoelectric properties were also calculated using BoltzTraP code. • Power factor shows that both compounds are good thermoelectric materials at 600 K. - Abstract: We present first principles calculations of the band structure, density of states, electronic charge density, Fermi surface and optical properties of Ba{sub 2}PrRuO{sub 6} single crystals at two different temperatures. The atomic positions were optimized by minimizing the forces acting on the atoms. We have employed the full potential linear augmented plane wave method within local density approximation, generalized gradient approximation and Engel–Vosko generalized gradient approximation to treat the exchange correlation potential. The calculation shows that the compound is superconductor with strong hybridization near the Fermi energy level. Fermi surface is composed of two sheets. The calculated electronic specific heat capacities indicate, very close agreement with the experimental one. The bonding features of the compounds are analyzed using the electronic charge density in the (1 0 0) and (0–10) crystallographic planes. The dispersion of the optical constants was calculated and discussed. The thermoelectric properties are also calculated using the BoltzTrap code.

  12. Cobalt hydroxide/oxide hexagonal ring-graphene hybrids through chemical etching of metal hydroxide platelets by graphene oxide: energy storage applications.

    Science.gov (United States)

    Nethravathi, C; Rajamathi, Catherine R; Rajamathi, Michael; Wang, Xi; Gautam, Ujjal K; Golberg, Dmitri; Bando, Yoshio

    2014-03-25

    The reaction of β-Co(OH)2 hexagonal platelets with graphite oxide in an aqueous colloidal dispersion results in the formation of β-Co(OH)2 hexagonal rings anchored to graphene oxide layers. The interaction between the basic hydroxide layers and the acidic groups on graphene oxide induces chemical etching of the hexagonal platelets, forming β-Co(OH)2 hexagonal rings. On heating in air or N2, the hydroxide hybrid is morphotactically converted to porous Co3O4/CoO hexagonal ring-graphene hybrids. Porous NiCo2O4 hexagonal ring-graphene hybrid is also obtained through a similar process starting from β-Ni0.33Co0.67(OH)2 platelets. As electrode materials for supercapacitors or lithium-ion batteries, these materials exhibit a large capacity, high rate capability, and excellent cycling stability.

  13. An investigation into photofunctional interfaces of 8-hydroxyquinoline/hydroxyapatite hybrids

    Science.gov (United States)

    Tagaya, Motohiro; Motozuka, Satoshi

    2017-04-01

    Organic/inorganic hybrids of 8-hydroxyquinoline (8Hq) molecule and hydroxyapatite nanocrystal (HAp) were mechanochemically prepared. In the hybrids, a green photoluminescence peak at 500 nm newly appeared, suggesting the chemical bonding of the 8Hq molecule with the Ca2+ ions of HAp. Then, the organic/inorganic interfacial photofunction was clarified by a molecular orbital calculation. The interfacial chemical bonding between the O and N atoms of 8Hq and the Ca2+ ions of HAp was attributed to both covalent Osbnd Ca and ionic Nsbnd Ca. The resultant wave functions revealed that the green luminescence was attributed to metal-to-ligand charge transfer (MLCT) from the O atoms of phosphate group (HAp) to the π-cloud (8Hq) in the HOMO of the hybrids. Therefore, the photofunctional interfaces of the hybrids were successfully demonstrated.

  14. Invention of stimulus-responsive peptide-bond-cleaving residue (Spr) and its application to chemical biology tools.

    Science.gov (United States)

    Shigenaga, Akira; Yamamoto, Jun; Kohiki, Taiki; Inokuma, Tsubasa; Otaka, Akira

    2017-07-01

    Elucidation of biological functions of peptides and proteins is essential for understanding peptide/protein-related biological events and developing drugs. Caged peptides and proteins that release a parent active peptide/protein by photo-irradiation have successfully been employed to elucidate the functions. Whereas the usual caged peptide/protein enables conversion of an inactive form to an active form (OFF-to-ON conversion) by photo-induced deprotection, photo-triggered main chain cleavage is reported to be applicable to ON-to-OFF conversion. These peptides and proteins are photo-responsive; however, if peptides and proteins could respond to other stimuli such as disease-related environment or enzymes, their range of application should be widened. To convert the photo-responsive peptide/protein into other stimulus-responsive peptide/protein, quite laborious de novo design and synthesis of the stimulus-responsive unit are required. In this context, we designed a stimulus-responsive peptide-bond-cleaving residue (Spr) in which the stimuli available for the main chain cleavage vary according to the choice of protecting groups on the residue. In this review, design and synthesis of Spr are introduced, and challenges to apply Spr to other fields to enable, for example, functional control, localization control, delivery of cargos, labeling of a protein of interest in living cells, and identification of target proteins of bioactive ligands are discussed. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

  15. Improvement of ground granulated blast furnace slag on stabilization/solidification of simulated mercury-doped wastes in chemically bonded phosphate ceramics.

    Science.gov (United States)

    Liu, Zhongzhe; Qian, Guangren; Zhou, Jizhi; Li, Chuanhua; Xu, Yunfeng; Qin, Zhe

    2008-08-30

    This paper investigated the effectiveness of (ground granulated blast furnace slag) GGBFS-added chemically bonded phosphate ceramic (CBPC) matrix on the stabilization/solidification (S/S) of mercury chloride and simulated mercury-bearing light bulbs (SMLB). The results showed that the maximal compressive strength was achieved when 15% and 10% ground GGBFS was added for HgCl(2)-doped and SMLB-doped CBPC matrices, respectively. The S/S performances of GGBFS-added matrices were significantly better than non-additive matrices. As pore size was reduced, the leaching concentration of Hg(2+) from GGBFS-added CBPC matrix could be reduced from 697 microg/L to about 3 microg/L when treating HgCl(2). Meanwhile, the main hydrating product of GGBFS-added matrices was still MgKPO(4).6H(2)O. The improvement of S/S effectiveness was mainly due to physical filling of fine GGBFS particles and microencapsulation of chemical cementing gel.

  16. Reaction dynamics. Extremely short-lived reaction resonances in Cl + HD (v = 1) → DCl + H due to chemical bond softening.

    Science.gov (United States)

    Yang, Tiangang; Chen, Jun; Huang, Long; Wang, Tao; Xiao, Chunlei; Sun, Zhigang; Dai, Dongxu; Yang, Xueming; Zhang, Dong H

    2015-01-02

    The Cl + H2 reaction is an important benchmark system in the study of chemical reaction dynamics that has always appeared to proceed via a direct abstraction mechanism, with no clear signature of reaction resonances. Here we report a high-resolution crossed-molecular beam study on the Cl + HD (v = 1, j = 0) → DCl + H reaction (where v is the vibrational quantum number and j is the rotational quantum number). Very few forward scattered products were observed. However, two distinctive peaks at collision energies of 2.4 and 4.3 kilocalories per mole for the DCl (v' = 1) product were detected in the backward scattering direction. Detailed quantum dynamics calculations on a highly accurate potential energy surface suggested that these features originate from two very short-lived dynamical resonances trapped in the peculiar H-DCl (v' = 2) vibrational adiabatic potential wells that result from chemical bond softening. We anticipate that dynamical resonances trapped in such wells exist in many reactions involving vibrationally excited molecules.

  17. FTIR, FT-Raman, UV-Visible spectra and quantum chemical calculations of allantoin molecule and its hydrogen bonded dimers.

    Science.gov (United States)

    Alam, Mohammad Jane; Ahmad, Shabbir

    2015-02-05

    FTIR, FT-Raman and electronic spectra of allantoin molecule are recorded and investigated using DFT and MP2 methods with 6-311++G(d,p) basis set. The molecular structure, anharmonic vibrational spectra, natural atomic charges, non-linear optical properties, etc. have been computed for the ground state of allantoin. The anharmonic vibrational frequencies are calculated using PT2 algorithm (Barone method) as well as VSCF and CC-VSCF methods. These methods yield results that are in remarkable agreement with the experiment. The coupling strengths between pairs of modes are also calculated using coupling integral based on 2MR-QFF approximation. The simulations on allantoin dimers have been also performed at B3LYP/6-311++G(d,p) level of theory to investigate the effect of the intermolecular interactions on the molecular structure and vibrational frequencies of the monomer. Vibrational assignments are made with the great accuracy using PED calculations and animated modes. The combination and overtone bands have been also identified in the FTIR spectrum with the help of anharmonic computations. The electronic spectra are simulated in gas and solution at TD-B3LYP/6-311++G(d,p) level of theory. The important global quantities such as electro-negativity, electronic chemical potential, electrophilicity index, chemical hardness and softness based on HOMO, LUMO energy eigenvalues are also computed. NBO analysis has been performed for monomer and dimers of allantoin at B3LYP/6-311++G(d,p) level of theory. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Hybrid polymer microspheres

    Science.gov (United States)

    Rembaum, A.

    1980-01-01

    Techniques have been successfully tested for bonding polymeric spheres, typically 0.1 micron in diameter, to spheres with diameter up to 100 microns. Hybrids are being developed as improved packing material for ion-exchange columns, filters, and separators.

  19. One-step chemical synthesis of ZnO/graphene oxide molecular hybrids for high-temperature thermoelectric applications.

    Science.gov (United States)

    Chen, Dongsheng; Zhao, Yan; Chen, Yani; Wang, Biao; Chen, Haiyan; Zhou, Jun; Liang, Ziqi

    2015-02-11

    ZnO as high-temperature thermoelectric material suffers from high lattice thermal conductivity and poor electrical conductivity. Al is often used to n-dope ZnO to form Zn1-xAlxO (AZO). Owing to very limited Al solubility (less than 2 atom %) in AZO, however, electrical conductivity is difficult to improve further. Moreover, such a low concentration of Al dopants can hardly reduce the thermal conductivity. Here, we propose slightly adding chemically reduced graphene oxides (rGOs) to AZO in various contents to modulate the carrier concentration and simultaneously optimize the electrical and thermal conductivities. Such nanocomposites with rGO embedded in AZO matrix are formed on the molecular level by one-step solution chemistry method. No obvious changes are found in crystalline structures of AZO after introducing rGOs. The rGO inclusions are shown to uniformly mix the AZO matrix that consists of compacted nanoparticles. In such AZO/rGO hybrids, Zn2+ is captured by the rGO, releasing extra electrons and thus increasing electron density, as confirmed by Hall measurements. The phonon-boundary scattering at the interface between AZO and rGO remarkably reduces the lattice thermal conductivity. Therefore, a respectable thermoelectric figure of merit of 0.28 at 900 °C is obtained in these nanocomposites at the rGO content of 1.5 wt %, which is 8 times larger than that of pure ZnO and 60% larger than that of alloyed AZO. This work demonstrates a facile wet chemistry route to produce nanostructured thermoelectric composites in which electrical conductivity can be greatly increased while largely lowering thermal conductivity, collectively enhancing the thermoelectric performance.

  20. Combined analysis of chemical bonding in a Cu(II) dimer using QTAIM, Voronoi tessellation and Hirshfeld surface approaches.

    Science.gov (United States)

    Vologzhanina, Anna V; Kats, Svitlana V; Penkova, Larisa V; Pavlenko, Vadim A; Efimov, Nikolay N; Minin, Vadim V; Eremenko, Igor L

    2015-10-01

    Interaction of 1-(1H-pyrazol-5-yl)ethanone oxime (H2PzOx) with copper(II) chloride in the presence of pyridine afforded a binuclear discrete [Cu2(HPzOx)2Cl2py2] complex, which was characterized by Fourier transform-IR and electron paramagnetic resonance (EPR) spectra, magnetochemistry and high-resolution X-ray diffraction experiments. Multipole refinement of X-ray diffraction data and density-functional theory (DFT) calculations of an isolated molecule allowed charge and spin distributions to be obtained for this compound. Magnetochemistry data, EPR spectra and DFT calculations of an isolated molecule show antiferromagnetic coupling between copper(II) ions. The spin distribution suggests an exchange pathway via the bridging pyrazole ring in the equatorial plane of the CuN4Cl coordination polyhedron, thus providing support for the classical superexchange mechanism; the calculated value of the magnetic coupling constant -2J is equal to 220 cm(-1), which compares well with the experimental value of 203 ± 2 cm(-1). Chemical connectivity was derived by Bader's 'quantum theory of atoms in molecules' and compared with Voronoi tessellation and Hirshfeld surface representations of crystal space. All methodologies gave a similar qualitative and semi-quantitative description of intra- and intermolecular connectivity.