WorldWideScience

Sample records for hybridization mband technique

  1. Image analysis using a dual-tree M-band wavelet transform.

    Science.gov (United States)

    Chaux, Caroline; Duval, Laurent; Pesquet, Jean-Christophe

    2006-08-01

    We propose a two-dimensional generalization to the M-band case of the dual-tree decomposition structure (initially proposed by Kingsbury and further investigated by Selesnick) based on a Hilbert pair of wavelets. We particularly address: 1) the construction of the dual basis and 2) the resulting directional analysis. We also revisit the necessary pre-processing stage in the M-band case. While several reconstructions are possible because of the redundancy of the representation, we propose a new optimal signal reconstruction technique, which minimizes potential estimation errors. The effectiveness of the proposed M-band decomposition is demonstrated via denoising comparisons on several image types (natural, texture, seismics), with various M-band wavelets and thresholding strategies. Significant improvements in terms of both overall noise reduction and direction preservation are observed.

  2. [Using mFISH and mBAND for Bioindication of Internal α-Radiation].

    Science.gov (United States)

    Sotnik, N V; Azizova, T V

    2016-01-01

    This study was aimed to compare mFISH and mBAND techniques in assessment of the yield of chromosomal aberrations induced by high-LET ionizing radiation. The study group included Mayak workers (46 individuals), for whom the yield of chromosomal aberrations was assessed using two methods: mFISH and mBAND. It was shown that both methods are applicable for biological indication of internal α-radiation exposure. Nevertheless, in case when the source of ionizing radiation is unknown or in terms of a mixed exposure, mFISH appeared as more informative technique that allows identification of markers both external γ-rays (translocations) and internal α-radiation (complex chromosomal rearrangements).

  3. Orthogonal M-band compactly supported interpolating wavelet theory

    Institute of Scientific and Technical Information of China (English)

    张建康; 保铮

    1999-01-01

    Recently, 2-band interpolating wavelet transform has attracted much attention. It has the following several features: (ⅰ)The wavelet series transform coefficients of a signal in the multiresolution subspace are exactly consistent with its discrete wavelet transform coefficints; (ⅱ)good approximation performance; (ⅲ)efficiency in computation.However orthogonal 2-band compactly supported interpolating wavelet transform is only the first order. In order to overcome this shortcoming, the orthogonal M-band compactly supported interpolating wavelet basis is established. First, the unitary interpolating scaling filters of the length L=MK are characterized. Second, a scheme is given to design highorder unitary interpolating scaling filters. Third, a parameterization of the unitary interpolating scaling filters of the length L=4M is made. Fourth, the orthogonal 2-order and 3-order three-band compactly supported interpolating scaling functions are constructed. Finally, the properties of the orthogonal M-band c

  4. Technique for Measuring Hybrid Electronic Component Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Green, C.C.; Hernandez, C.L.; Hosking, F.M.; Robinson, D.; Rutherford, B.; Uribe, F.

    1999-01-01

    Materials compatibility studies of aged, engineered materials and hardware are critical to understanding and predicting component reliability, particularly for systems with extended stockpile life requirements. Nondestructive testing capabilities for component reliability would significantly enhance lifetime predictions. For example, if the detection of crack propagation through a solder joint can be demonstrated, this technique could be used to develop baseline information to statistically determine solder joint lifelengths. This report will investigate high frequency signal response techniques for nondestructively evaluating the electrical behavior of thick film hybrid transmission lines.

  5. M-BAND Analysis of Chromosome Aberration Induced by Fe-Ions in Human Epithelial Cells Cultured in 3-Dimensional Matrices

    Science.gov (United States)

    Hada, M.; Cucinotta, F. A.; Wu, H.

    2008-01-01

    Energetic heavy ions pose a great health risk to astronauts in extended ISS and future lunar and Mars missions. High-LET heavy ions are particularly effective in causing various biological effects, including cell inactivation, genetic mutations, cataracts and cancer induction. Most of these biological endpoints are closely related to chromosomal damage, which can be utilized as a biomarker for radiation insults. Previously, we had studied low- and high-LET radiation-induced chromosome aberrations in human epithelial cells cultured in 2-dimension (2D) using the multicolor banding fluorescence in situ hybridization (mBAND) technique. However, it has been realized that the biological response to radiation insult in a 2D cellular environment in vitro can differ significantly from the response in 3-dimension (3D) or at the actual tissue level. In this study, we cultured human epithelial cells in 3D to provide a more suitable model for human tissue. Human mammary epithelia cells (CH184B5F5/M10) were grown in Matrigel to form 3D structures, and exposed to Fe-ions at NASA Space Radiation Laboratory (NSRL) at the Brookhaven National Laboratory or 137Cs-gamma radiation source at the University of Texas MD Anderson Cancer Center. After exposure, cells were allowed to repair for 16hr before dissociation and subcultued at low density in 2D. G2 and metaphase chromosomes in the first cell cycle were collected using a chemical-induced premature chromosome condensation (PCC) technique, and chromosome aberrations were analyzed using mBAND technique. With this technique, individually painted chromosomal bands on one chromosome allowed the identification of interchromosomal aberrations (translocation to unpainted chromosomes) and intrachromosomal aberrations (inversions and deletions within a single painted chromosome). Our data indicate a significant difference of the chromosome aberration yield between 2D and 3D cell cultures for gamma exposures, but not for Fe ion exposures

  6. M-BAND analysis of chromosome aberration induced by Fe-ions in human epithelial cells cultured in 3-dimensional matrices

    Science.gov (United States)

    Hada, Megumi; Cucinotta, Francis A.; Wu, Honglu

    Energetic heavy ions pose a great health risk to astronauts in extended ISS and future lunar and Mars missions. High-LET heavy ions are particularly effective in causing various biological effects, including cell inactivation, genetic mutations, cataracts and cancer induction. Most of these biological endpoints are closely related to chromosomal damage, which can be utilized as a biomarker for radiation insults. Previously, we had studied lowand high-LET radiationinduced chromosome aberrations in human epithelial cells cultured in 2-dimension (2D) using the multicolor banding fluorescence in situ hybridization (mBAND) technique. However, it has been realized that the biological response to radiation insult in a 2D cellular environment in vitro can differ significantly from the response in 3-dimension (3D) or at the actual tissue level. In this study, we cultured human epithelial cells in 3D to provide a more suitable model for human tissue. Human mammary epithelial cells (CH184B5F5/M10) were grown in Matrigel to form 3D structures, and exposed to Fe-ions at NASA Space Radiation Laboratory (NSRL) at the Brookhaven National Laboratory or 137 Cs-gamma radiation source at the University of Texas MD Anderson Cancer Center. After exposure, cells were allowed to repair for 16hr before dissociation and subcultured at low density in 2D. G2 and metaphase chromosomes in the first cell cycle were collected using a chemical-induced premature chromosome condensation (PCC) technique, and chromosome aberrations were analyzed using mBAND technique. With this technique, individually painted chromosomal bands on one chromosome allowed the identification of interchromosomal aberrations (translocation to unpainted chromosomes) and intrachromosomal aberrations (inversions and deletions within a single painted chromosome). Our data indicate a significant difference of the chromosome aberration yield between 2D and 3D cell cultures for gamma exposures, but not for Fe ion exposures

  7. M-BAND Analysis of Chromosome Aberration Induced by Fe-Ions in Human Epithelial Cells Cultured in 3-Dimensional Matrices

    Science.gov (United States)

    Hada, M.; Cucinotta, F. A.; Wu, H.

    2008-01-01

    Energetic heavy ions pose a great health risk to astronauts in extended ISS and future lunar and Mars missions. High-LET heavy ions are particularly effective in causing various biological effects, including cell inactivation, genetic mutations, cataracts and cancer induction. Most of these biological endpoints are closely related to chromosomal damage, which can be utilized as a biomarker for radiation insults. Previously, we had studied low- and high-LET radiation-induced chromosome aberrations in human epithelial cells cultured in 2-dimension (2D) using the multicolor banding fluorescence in situ hybridization (mBAND) technique. However, it has been realized that the biological response to radiation insult in a 2D cellular environment in vitro can differ significantly from the response in 3-dimension (3D) or at the actual tissue level. In this study, we cultured human epithelial cells in 3D to provide a more suitable model for human tissue. Human mammary epithelia cells (CH184B5F5/M10) were grown in Matrigel to form 3D structures, and exposed to Fe-ions at NASA Space Radiation Laboratory (NSRL) at the Brookhaven National Laboratory or 137Cs-gamma radiation source at the University of Texas MD Anderson Cancer Center. After exposure, cells were allowed to repair for 16hr before dissociation and subcultued at low density in 2D. G2 and metaphase chromosomes in the first cell cycle were collected using a chemical-induced premature chromosome condensation (PCC) technique, and chromosome aberrations were analyzed using mBAND technique. With this technique, individually painted chromosomal bands on one chromosome allowed the identification of interchromosomal aberrations (translocation to unpainted chromosomes) and intrachromosomal aberrations (inversions and deletions within a single painted chromosome). Our data indicate a significant difference of the chromosome aberration yield between 2D and 3D cell cultures for gamma exposures, but not for Fe ion exposures

  8. M-BAND Study of Radiation-Induced Chromosome Aberrations in Human Epithelial Cells: Radiation Quality and Dose Rate Effects

    Science.gov (United States)

    Hada, Megumi; Cucinotta, Francis; Wu, Honglu

    2009-01-01

    The advantage of the multicolor banding in situ hybridization (mBAND) technique is its ability to identify both inter- (translocation to unpainted chromosomes) and intra- (inversions and deletions within a single painted chromosome) chromosome aberrations simultaneously. To study the detailed rearrangement of low- and high-LET radiation induced chromosome aberrations in human epithelial cells (CH184B5F5/M10) in vitro, we performed a series of experiments with Cs-137 gamma rays of both low and high dose rates, neutrons of low dose rate and 600 MeV/u Fe ions of high dose rate, with chromosome 3 painted with multi-binding colors. We also compared the chromosome aberrations in both 2- and 3-dimensional cell cultures. Results of these experiments revealed the highest chromosome aberration frequencies after low dose rate neutron exposures. However, detailed analysis of the radiation induced inversions revealed that all three radiation types induced a low incidence of simple inversions. Most of the inversions in gamma-ray irradiated samples were accompanied by other types of intra-chromosomal aberrations but few inversions were accompanied by inter-chromosomal aberrations. In contrast, neutrons and Fe ions induced a significant fraction of inversions that involved complex rearrangements of both inter- and intrachromosomal exchanges. The location of the breaks involved in chromosome exchanges was analyzed along the painted chromosome. The breakpoint distribution was found to be randomly localized on chromosome 3 after neutron or Fe ion exposure, whereas non-random distribution with clustering breakpoints was observed after -ray exposure. Our comparison of chromosome aberration yields between 2- and 3-dimensional cell cultures indicated a significant difference for gamma exposures, but not for Fe ion exposures. These experimental results indicated that the track structure of the radiation and the cellular/chromosome structure can both affect radiation-induced chromosome

  9. Multiple angle measurement and modeling of M-band x-ray fluxes from vacuum hohlraum

    Science.gov (United States)

    Guo, Liang; Li, Shanwei; Li, Zhichao; Jing, Longfei; Xie, Xufei; Jiang, Xiaohua; Yang, Dong; Du, Huabin; Hou, Lifei; Yang, Jiamin; Liu, Shenye; Jiang, Shaoen; Ding, Yongkun; Hu, Guangyue; Zheng, Jian

    2016-09-01

    The energetics experiment of vacuum gold hohlraums is implemented on the Shenguang-II laser facility. The total and M-band x-ray fluxes from the laser entrance holes are measured by the flat response x-ray diodes which are set at multiple angles with respect to the axis of the hohlraums. The measured M-band fractions are from 5.72% to 7.71%, which present a specific angular distribution. Based on the fact that the M-band x-rays are mainly emitted from the under-dense high-temperature plasmas, a simplified model is developed to give a quantitative prediction of the intensity, temporal behavior, and angular distribution of the M-band x-ray flux. The results obtained with our model are in good agreement with the experimental data, showing that our model can be a useful tool for M-band x-ray investigation.

  10. Hybrid ultrasound imaging techniques (fusion imaging).

    Science.gov (United States)

    Sandulescu, Daniela Larisa; Dumitrescu, Daniela; Rogoveanu, Ion; Saftoiu, Adrian

    2011-01-07

    Visualization of tumor angiogenesis can facilitate non-invasive evaluation of tumor vascular characteristics to supplement the conventional diagnostic imaging goals of depicting tumor location, size, and morphology. Hybrid imaging techniques combine anatomic [ultrasound, computed tomography (CT), and/or magnetic resonance imaging (MRI)] and molecular (single photon emission CT and positron emission tomography) imaging modalities. One example is real-time virtual sonography, which combines ultrasound (grayscale, colour Doppler, or dynamic contrast harmonic imaging) with contrast-enhanced CT/MRI. The benefits of fusion imaging include an increased diagnostic confidence, direct comparison of the lesions using different imaging modalities, more precise monitoring of interventional procedures, and reduced radiation exposure.

  11. Hybrid ultrasound imaging techniques(fusion imaging)

    Institute of Scientific and Technical Information of China (English)

    Daniela Larisa Sandulescu; Daniela Dumitrescu; Ion Rogoveanu; Adrian Saftoiu

    2011-01-01

    Visualization of tumor angiogenesis can facilitate noninvasive evaluation of tumor vascular characteristics to supplement the conventional diagnostic imaging goals of depicting tumor location,size,and morphology.Hybrid imaging techniques combine anatomic [ultrasound,computed tomography(CT),and/or magnetic resonance imaging(MRI)] and molecular(single photon emission CT and positron emission tomography)imaging modalities.One example is real-time virtual sonography,which combines ultrasound(grayscale,colour Doppler,or dynamic contrast harmonic imaging)with contrast-enhanced CT/MRI.The benefits of fusion imaging include an increased diagnostic confidence,direct comparison of the lesions using different imaging modalities,more precise monitoring of interventional procedures,and reduced radiation exposure.

  12. HYBRID INTERNET TRAFFIC CLASSIFICATION TECHNIQUE1

    Institute of Scientific and Technical Information of China (English)

    Li Jun; Zhang Shunyi; Lu Yanqing; Yan Junrong

    2009-01-01

    Accurate and real-time classification of network traffic is significant to network operation and management such as QoS differentiation, traffic shaping and security surveillance. However, with many newly emerged P2P applications using dynamic port numbers, masquerading techniques, and payload encryption to avoid detection, traditional classification approaches turn to be ineffective. In this paper, we present a layered hybrid system to classify current Internet traffic, motivated by variety of network activities and their requirements of traffic classification. The proposed method could achieve fast and accurate traffic classification with low overheads and robustness to accommodate both known and unknown/encrypted applications. Furthermore, it is feasible to be used in the context of real-time traffic classification. Our experimental results show the distinct advantages of the proposed classification system, compared with the one-step Machine Learning (ML) approach.

  13. A New Generic Taxonomy on Hybrid Malware Detection Technique

    CERN Document Server

    Robiah, Y; Zaki, M Mohd; Shahrin, S; Faizal, M A; Marliza, R

    2009-01-01

    Malware is a type of malicious program that replicate from host machine and propagate through network. It has been considered as one type of computer attack and intrusion that can do a variety of malicious activity on a computer. This paper addresses the current trend of malware detection techniques and identifies the significant criteria in each technique to improve malware detection in Intrusion Detection System (IDS). Several existing techniques are analyzing from 48 various researches and the capability criteria of malware detection technique have been reviewed. From the analysis, a new generic taxonomy of malware detection technique have been proposed named Hybrid Malware Detection Technique (Hybrid MDT) which consists of Hybrid Signature and Anomaly detection technique and Hybrid Specification based and Anomaly detection technique to complement the weaknesses of the existing malware detection technique in detecting known and unknown attack as well as reducing false alert before and during the intrusion ...

  14. Implementation of Texture Based Image Retrieval Using M-band Wavelet Transform

    Institute of Scientific and Technical Information of China (English)

    LiaoYa-li; Yangyan; CaoYang

    2003-01-01

    Wavelet transform has attracted attention because it is a very useful tool for signal analyzing. As a fundamental characteristic of an image, texture traits play an important role in the human vision system for recognition and interpretation of images. The paper presents an approach to implement texture-based image retrieval using M-band wavelet transform. Firstly the traditional 2-band wavelet is extended to M-band wavelet transform. Then the wavelet moments are computed by M-band wavelet coefficients in the wavelet domain. The set of wavelet moments forms the feature vector related to the texture distribution of each wavelet images. The distances between the feature vectors describe the similarities of different images. The experimental result shows that the M-band wavelet moment features of the images are effective for image indexing.The retrieval method has lower computational complexity, yet it is capable of giving better retrieval performance for a given medical image database.

  15. Implementation of Texture Based Image Retrieval Using M-band Wavelet Transform

    Institute of Scientific and Technical Information of China (English)

    Liao Ya-li; Yang Yan; Cao Yang

    2003-01-01

    Wavelet transform has attracted attention because it is a very useful tool for signal analyzing. As a fundamental characteristic of an image, texture traits play an important role in the human vision system for recognition and interpretation of images. The paper presents an approach to implement texture-based image retrieval using M-band wavelet transform. Firstly the traditional 2-band wavelet is extended to M-band wavelet transform. Then the wavelet moments are computed by M-band wavelet coefficients in the wavelet domain. The set of wavelet moments forms the feature vector related to the texture distribution of each wavelet images. The distances between the feature vectors describe the similarities of different images. The experimental result shows that the M-band wavelet moment features of the images are effective for image indexing. The retrieval method has lower computational complexity, yet it is capable of giving better retrieval performance for a given medical image database.

  16. Chromosome Aberrations in Human Epithelial Cells Exposed Los Alamos High-Energy Secondary Neutrons: M-BAND Analysis

    Science.gov (United States)

    Hada, M.; Saganti, P. B.; Gersey, B.; Wilkins, R.; Cucinotta, F. A.; Wu, H.

    2007-01-01

    High-energy secondary neutrons, produced by the interaction of galactic cosmic rays (GCR) with the atmosphere, spacecraft structure and planetary surfaces, contribute a significant fraction to the dose equivalent radiation measurement in crew members and passengers of commercial aviation travel as well as astronauts in space missions. The Los Alamos Nuclear Science Center (LANSCE) neutron facility's 30L beam line (4FP30L-A/ICE House) is known to generate neutrons that simulate the secondary neutron spectrum of the Earth's atmosphere at high altitude. The neutron spectrum is also similar to that measured onboard spacecrafts like the MIR and the International Space Station (ISS). To evaluate the biological damage, we exposed human epithelial cells in vitro to the LANSCE neutron beams with an entrance dose rate of 2.5 cGy/hr, and studied the induction of chromosome aberrations that were identified with multicolor-banding in situ hybridization (mBAND) technique. With this technique, individually painted chromosomal bands on one chromosome allowed the identification of inter-chromosomal aberrations (translocation to unpainted chromosomes) and intra-chromosomal aberrations (inversions and deletions within a single painted chromosome). Compared to our previous results with gamma-rays and 600 MeV/nucleon Fe ions of high dose rate at NSRL (NASA Space Radiation Laboratory at Brookhaven National Laboratory), the neutron data from the LANSCE experiments showed significantly higher frequency of chromosome aberrations. However, detailed analysis of the inversion type revealed that all of the three radiation types in the study induced a low incidence of simple inversions. Most of the inversions in gamma-ray irradiated samples were accompanied by other types of intrachromosomal aberrations but few inversions were accompanied by interchromosomal aberrations. In contrast, neutrons and Fe ions induced a significant fraction of inversions that involved complex rearrangements of both

  17. Wind Speed Forecasting Using Hybrid Wavelet Transform—ARMA Techniques

    Directory of Open Access Journals (Sweden)

    Diksha Kaur

    2015-01-01

    Full Text Available The objective of this paper is to develop a novel wind speed forecasting technique, which produces more accurate prediction. The Wavelet Transform (WT along with the Auto Regressive Moving Average (ARMA is chosen to form a hybrid whose combination is expected to give minimum Mean Absolute Prediction Error (MAPE. A simulation study has been conducted by comparing the forecasting results using the Wavelet-ARMA with the ARMA and Artificial Neural Network (ANN-Ensemble Kalman Filter (EnKF hybrid technique to verify the effectiveness of the proposed hybrid method. Results of the proposed hybrid show significant improvements in the forecasting error.

  18. mBAND analysis of chromosome aberrations in human epithelial cells induced by gamma-rays and secondary neutrons of low dose rate.

    Science.gov (United States)

    Hada, M; Gersey, B; Saganti, P B; Wilkins, R; Cucinotta, F A; Wu, H

    2010-08-14

    Human risks from chronic exposures to both low- and high-LET radiation are of intensive research interest in recent years. In the present study, human epithelial cells were exposed in vitro to gamma-rays at a dose rate of 17 mGy/h or secondary neutrons of 25 mGy/h. The secondary neutrons have a broad energy spectrum that simulates the Earth's atmosphere at high altitude, as well as the environment inside spacecrafts like the Russian MIR station and the International Space Station (ISS). Chromosome aberrations in the exposed cells were analyzed using the multicolor banding in situ hybridization (mBAND) technique with chromosome 3 painted in 23 colored bands that allows identification of both inter- and intrachromosome exchanges including inversions. Comparison of present dose responses between gamma-rays and neutron irradiations for the fraction of cells with damaged chromosome 3 yielded a relative biological effectiveness (RBE) value of 26+/-4 for the secondary neutrons. Our results also revealed that secondary neutrons of low dose rate induced a higher fraction of intrachromosome exchanges than gamma-rays, but the fractions of inversions observed between these two radiation types were indistinguishable. Similar to the previous findings after acute radiation exposures, most of the inversions observed in the present study were accompanied by other aberrations. The fractions of complex type aberrations and of unrejoined chromosomal breakages were also found to be higher in the neutron-exposed cells than after gamma-rays. We further analyzed the location of the breaks involved in chromosome aberrations along chromosome 3, and observed hot spots after gamma-ray, but not neutron, exposures.

  19. Using VISAR to assess the M-band isotropy in hohlraums

    Science.gov (United States)

    Lanier, N. E.; Kline, J. L.; Morton, J.

    2016-11-01

    In laser based radiation flow experiments, drive variability can often overwhelm the physics sensitivity that one seeks to quantify. Hohlraums can help by providing a more symmetrized, Planckian-like source. However, at higher temperatures, the hohlraum's actual emission can deviate significantly from a truly blackbody, Lambertian source. At the National Ignition Facility (NIF), Dante provides the best quantification of hohlraum output. Unfortunately, limited diagnostic access coupled with NIF's natural symmetry does not allow for Dante measurements at more than two angles. As part of the CEPHEUS campaign on NIF, proof-of-principle experiments to better quantify the gold M-band isotropy were conducted. These experiments positioned beryllium/aluminum mirrors at differing angles, offset from the hohlraum. Filtering removes the thermal emission of the hohlraum and the remaining M-band radiation is preferentially absorbed in the aluminum layer. The subsequent hydrodynamic motion is measured via VISAR. Although indirect, this M-band measurement can be made at any angle.

  20. Ultra Wide Band localization and tracking hybrid technique using VRTs

    Directory of Open Access Journals (Sweden)

    Mohd Shamian Zianal

    2012-12-01

    Full Text Available This research presents hybrid radar tracking technique consisting of Time Of Arrival (TOA and Received Signal Strength (RSS techniques. This hybrid design increases efficiency, accuracy and sensitivity of radar system. The radar used in this research is multistatic radar with one transmitter and three receivers. One common drawback in RSS and TOA techniques is high level synchronization in transmitter and receivers. The hybrid design also suffers from transmitter-receiver synchronization. To overcome TX-RX synchronization problem Virtual Reference Tags (VRTs are used. These tags are virtually mapped over the surveillance area giving radar design different reference points from which it can accurately locate intruder and monitor its movements. Also four cases of different

  1. A hybrid localization technique for patient tracking.

    Science.gov (United States)

    Rodionov, Denis; Kolev, George; Bushminkin, Kirill

    2013-01-01

    Nowadays numerous technologies are employed for tracking patients and assets in hospitals or nursing homes. Each of them has advantages and drawbacks. For example, WiFi localization has relatively good accuracy but cannot be used in case of power outage or in the areas with poor WiFi coverage. Magnetometer positioning or cellular network does not have such problems but they are not as accurate as localization with WiFi. This paper describes technique that simultaneously employs different localization technologies for enhancing stability and average accuracy of localization. The proposed algorithm is based on fingerprinting method paired with data fusion and prediction algorithms for estimating the object location. The core idea of the algorithm is technology fusion using error estimation methods. For testing accuracy and performance of the algorithm testing simulation environment has been implemented. Significant accuracy improvement was showed in practical scenarios.

  2. New techniques for emulsion analysis in a hybrid experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kodama, K. (Aichi University of Education, Kariya 448 (Japan)); Ushida, N. (Aichi University of Education, Kariya 448 (Japan)); Mokhtarani, A. (University of California (Davis), Davis, CA 95616 (United States)); Paolone, V.S. (University of California (Davis), Davis, CA 95616 (United States)); Volk, J.T. (University of California (Davis), Davis, CA 95616 (United States)); Wilcox, J.O. (University of California (Davis), Davis, CA 95616 (United States)); Yager, P.M. (University of California (Davis), Davis, CA 95616 (United States)); Edelstein, R.M. (Carnegie-Mellon University, Pittsburgh, PA 15213 (United States)); Freyberger, A.P. (Carnegie-Mellon University, Pittsburgh, PA 15213 (United States)); Gibaut, D.B. (Carnegie-Mellon University, Pittsburgh, PA 15213 (United States)); Lipton, R.J. (Carnegie-Mellon University, Pittsburgh, PA 15213 (United States)); Nichols, W.R. (Carnegie-Mellon University, Pittsburgh, PA 15213 (United States)); Potter, D.M. (Carnegie-Mellon Univers

    1994-08-01

    A new method, called graphic scanning, was developed by the Nagoya University Group for emulsion analysis in a hybrid experiment. This method enhances both speed and reliability of emulsion analysis. Details of the application of this technique to the analysis of Fermilab experiment E653 are described. ((orig.))

  3. A Hybridized Centroid Technique for 3D Molodensky-Badekas ...

    African Journals Online (AJOL)

    Richannan

    two new hybrid centroid techniques known as the harmonic-quadratic mean and arithmetic- ... was subsequently involved in triangulation nets with other trigonometric ..... The functional relation that is used to compute the TLS solution is given by ..... mathematical models is an approximation of reality, hence it is worth noting ...

  4. Bonding techniques for hybrid active pixel sensors (HAPS)

    Science.gov (United States)

    Bigas, M.; Cabruja, E.; Lozano, M.

    2007-05-01

    A hybrid active pixel sensor (HAPS) consists of an array of sensing elements which is connected to an electronic read-out unit. The most used way to connect these two different devices is bump bonding. This interconnection technique is very suitable for these systems because it allows a very fine pitch and a high number of I/Os. However, there are other interconnection techniques available such as direct bonding. This paper, as a continuation of a review [M. Lozano, E. Cabruja, A. Collado, J. Santander, M. Ullan, Nucl. Instr. and Meth. A 473 (1-2) (2001) 95-101] published in 2001, presents an update of the different advanced bonding techniques available for manufacturing a hybrid active pixel detector.

  5. Wind Speed Forecasting Using Hybrid Wavelet Transform—ARMA Techniques

    OpenAIRE

    Diksha Kaur; Tek Tjing Lie; Nirmal K. C. Nair; Brice Vallès

    2015-01-01

    The objective of this paper is to develop a novel wind speed forecasting technique, which produces more accurate prediction. The Wavelet Transform (WT) along with the Auto Regressive Moving Average (ARMA) is chosen to form a hybrid whose combination is expected to give minimum Mean Absolute Prediction Error (MAPE). A simulation study has been conducted by comparing the forecasting results using the Wavelet-ARMA with the ARMA and Artificial Neural Network (ANN)-Ensemble Kalman Filter (EnKF) hy...

  6. Early Oscillation Detection Technique for Hybrid DC/DC Converters

    Science.gov (United States)

    Wang, Bright L.

    2011-01-01

    Oscillation or instability is a situation that must be avoided for reliable hybrid DC/DC converters. A real-time electronics measurement technique was developed to detect catastrophic oscillations at early stages for hybrid DC/DC converters. It is capable of identifying low-level oscillation and determining the degree of the oscillation at a unique frequency for every individual model of the converters without disturbing their normal operations. This technique is specially developed for space-used hybrid DC/DC converters, but it is also suitable for most of commercial and military switching-mode power supplies. This is a weak-electronic-signal detection technique to detect hybrid DC/DC converter oscillation presented as a specific noise signal at power input pins. It is based on principles of feedback control loop oscillation and RF signal modulations, and is realized by using signal power spectral analysis. On the power spectrum, a channel power amplitude at characteristic frequency (CPcf) and a channel power amplitude at switching frequency (CPsw) are chosen as oscillation level indicators. If the converter is stable, the CPcf is a very small pulse and the CPsw is a larger, clear, single pulse. At early stage of oscillation, the CPcf increases to a certain level and the CPsw shows a small pair of sideband pulses around it. If the converter oscillates, the CPcf reaches to a higher level and the CPsw shows more high-level sideband pulses. A comprehensive stability index (CSI) is adopted as a quantitative measure to accurately assign a degree of stability to a specific DC/DC converter. The CSI is a ratio of normal and abnormal power spectral density, and can be calculated using specified and measured CPcf and CPsw data. The novel and unique feature of this technique is the use of power channel amplitudes at characteristic frequency and switching frequency to evaluate stability and identify oscillations at an early stage without interfering with a DC/DC converter s

  7. Resonant frequency calculations using a hybrid perturbation-Galerkin technique

    Science.gov (United States)

    Geer, James F.; Andersen, Carl M.

    1991-01-01

    A two-step hybrid perturbation Galerkin technique is applied to the problem of determining the resonant frequencies of one or several degrees of freedom nonlinear systems involving a parameter. In one step, the Lindstedt-Poincare method is used to determine perturbation solutions which are formally valid about one or more special values of the parameter (e.g., for large or small values of the parameter). In step two, a subset of the perturbation coordinate functions determined in step one is used in Galerkin type approximation. The technique is illustrated for several one degree of freedom systems, including the Duffing and van der Pol oscillators, as well as for the compound pendulum. For all of the examples considered, it is shown that the frequencies obtained by the hybrid technique using only a few terms from the perturbation solutions are significantly more accurate than the perturbation results on which they are based, and they compare very well with frequencies obtained by purely numerical methods.

  8. Hybrid Technique of Lamellar Keratoplasty (DMEK-S

    Directory of Open Access Journals (Sweden)

    Pavel Studeny

    2013-01-01

    Full Text Available Purpose: To evaluate the outcomes of the hybrid technique of posterior lamellar keratoplasty (DMEK-S. Materials and Methods: 71 eyes of 55 patients enrolled in a single-center study underwent posterior lamellar keratoplasty with a hybrid lamella DMEK-S implanted using a solution implantation technique, owing to endothelial dysfunction. The outcome measures studied were visual acuity and endothelial cell density. Results: The rate of endothelial cell loss caused by surgery was 43.8%. During followups, we observed the stabilization of postoperative findings, or at minimum a very low rate of corneal endothelial cell loss. The UCDVA and BCDVA dramatically improved postoperatively. The rebubbling rate in our group of patients was 61.9%. We replaced the lamella due to its failure or malfunction in 17 patients (23.9%. Conclusion: In summary, DMEK-S combines the advantages of DSEK/DSAEK and DMEK. The central zone of bare Descemet’s membrane and endothelium allows for very good visual outcomes, and the peripheral rim allows for better manipulation of the lamella during implantation. It is an effective method of treating the endothelial dysfunction of various etiologies, but the high complication rate needs to be addressed before widespread implementation of the technique in the future.

  9. mBAND Analysis of Early and Late Damages in the Chromosome of Human Lymphocytes after Exposures to Gamma Rays and Fe Ions

    Science.gov (United States)

    Sunagawa, Mayumi; Zhang, Ye; Yeshitla, Samrawit; Kadhim, Munira; Wilson, Bobby; Wu, Honglu

    2013-01-01

    Stable type chromosome aberrations that survive multiple generations of cell division include translocation and inversions. An efficient method to detect an inversion is multi-color banding fluorescent in situ hybridization (mBAND) which allows identification of both inter- and intrachromosome aberrations simultaneously. Post irradiation, chromosome aberrations may also arise after multiple cell divisions as a result of genomic instability. To investigate the stable or late-arising chromosome aberrations induced after radiation exposure, we exposed human lymphocytes to gamma rays and Fe ions ex vivo, and cultured the cells for multiple generations. Chromosome aberrations were analyzed in cells collected at first mitosis and at several time intervals during the culture period post irradiation. With gamma irradiation, about half of the damages observed at first mitosis remained after 7 day- and 14 day- culture, suggesting the transmissibility of damages to the surviving progeny. At the doses that produced similar frequencies of gamma-induced chromosome aberrations as observed at first mitosis, a significantly lower yield of aberrations remained at the same population doublings after Fe ion exposure. At these equitoxic doses, more complex type aberrations were observed for Fe ions, indicating that Fe ion-induced initial chromosome damages are more severe and may lead to cell death. Detailed analysis of breaks participating in total chromosome exchanges within the first cell cycle post irradiation revealed a common hotspot located in the 3p21 region, which is a known fragile site corresponding to the band 6 in the mBand analysis. The breakpoint distribution in chromosomes collected at 7 days, but not at 14 days, post irradiation appeared similar to the distribution in cells collected within the first cell cycle post irradiation. The breakpoint distribution for human lymphocytes after radiation exposure was different from the previously published distribution for human

  10. A hybrid sequential deposition fabrication technique for micro fuel cells

    Science.gov (United States)

    Stanley, Kevin G.; Czyzewska, Eva K.; Vanderhoek, Tom P. K.; Fan, Lilian L. Y.; Abel, Keith A.; Wu, Q. M. Jonathan; Parameswaran, M. Ash

    2005-10-01

    Micro fuel cell systems have elicited significant interest due to their promise for instantly rechargeable, longer duration and portable power. Most micro fuel cell systems are either built as miniaturized plate-and-frame or silicon-based microelectromechanical systems (MEMS). Plate-and-frame systems are difficult to fabricate smaller than 20 cm3. Existing micro fuel cell designs cannot meet the cost, scale and power requirements of some portable power markets. Traditional MEMS scaling advantages do not apply to fuel cells because the minimum area for the fuel cell is fixed by the catalyst area required for a given power output, and minimum volume set by mass transport limitations. We have developed a new hybrid technique that borrows from both micro and macro machining techniques to create fuel cells in the 1-20 cm3 range, suitable for cell phones, PDAs and smaller devices.

  11. An Adaptive Hybrid Multiprocessor technique for bioinformatics sequence alignment

    KAUST Repository

    Bonny, Talal

    2012-07-28

    Sequence alignment algorithms such as the Smith-Waterman algorithm are among the most important applications in the development of bioinformatics. Sequence alignment algorithms must process large amounts of data which may take a long time. Here, we introduce our Adaptive Hybrid Multiprocessor technique to accelerate the implementation of the Smith-Waterman algorithm. Our technique utilizes both the graphics processing unit (GPU) and the central processing unit (CPU). It adapts to the implementation according to the number of CPUs given as input by efficiently distributing the workload between the processing units. Using existing resources (GPU and CPU) in an efficient way is a novel approach. The peak performance achieved for the platforms GPU + CPU, GPU + 2CPUs, and GPU + 3CPUs is 10.4 GCUPS, 13.7 GCUPS, and 18.6 GCUPS, respectively (with the query length of 511 amino acid). © 2010 IEEE.

  12. Coherent noise removal in seismic data with dual-tree M-band wavelets

    Science.gov (United States)

    Duval, Laurent; Chaux, Caroline; Ker, Stéphan

    2007-09-01

    Seismic data and their complexity still challenge signal processing algorithms in several applications. The advent of wavelet transforms has allowed improvements in tackling denoising problems. We propose here coherent noise filtering in seismic data with the dual-tree M-band wavelet transform. They offer the possibility to decompose data locally with improved multiscale directions and frequency bands. Denoising is performed in a deterministic fashion in the directional subbands, depending of the coherent noise properties. Preliminary results show that they consistently better preserve seismic signal of interest embedded in highly energetic directional noises than discrete critically sampled and redundant separable wavelet transforms.

  13. mBAND Analysis of Late Chromosome Aberrations in Human Lymphocytes Induced by Gamma Rays and Fe Ions

    Science.gov (United States)

    Sunagawa, Mayumi; Zhang, Ye; Yeshitla, Samrawit; Kadhim, Munira; Wilson, Bobby; Wu, Honglu

    2014-01-01

    Chromosomal translocations and inversions are considered stable, and cells containing these types of chromosome aberrations can survive multiple cell divisions. An efficient method to detect an inversion is multi-color banding fluorescent in situ hybridization (mBAND) which allows identification of both inter- and intrachromosome aberrations simultaneously. Post irradiation, chromosome aberrations may also arise after multiple cell divisions as a result of genomic instability. To investigate the stable or late-arising chromosome aberrations induced after radiation exposure, we exposed human lymphocytes to gamma rays and Fe ions ex vivo, and cultured the cells for multiple generations. Chromosome aberrations were analyzed in cells collected at first mitosis and at several time intervals during the culture period post irradiation. With gamma irradiation, about half of the damages observed at first mitosis remained after 7 day- and 14 day- culture, suggesting the transmissibility of damages to the surviving progeny. Detailed analysis of chromosome break ends participating in exchanges revealed a greater fraction of break ends involved in intrachromosome aberrations in the 7- and 14-day samples in comparison to the fraction at first mitosis. In particular, simple inversions were found at 7 and 14 days, but not at the first mitosis, suggesting that some of the aberrations might be formed days post irradiation. In contrast, at the doses that produced similar frequencies of gamma-induced chromosome aberrations as observed at first mitosis, a significantly lower yield of aberrations remained at the same population doublings after Fe ion exposure. At these equitoxic doses, more complex type aberrations were observed for Fe ions, indicating that Fe ion-induced initial chromosome damages are more severe and may lead to cell death. Comparison between low and high doses of Fe ion irradiation in the induction of late damages will also be discussed.

  14. Color and Rotated M-Band Dual Tree Complex Wavelet Transform Features for Image Retrieval

    Directory of Open Access Journals (Sweden)

    K. Prasanthi Jasmine

    2014-08-01

    Full Text Available In this paper, a novel algorithm which integrates the RGB color histogram and texture features for content based image retrieval. A new set of two-dimensional (2-D M-band dual tree complex wavelet transform (M_band_DT_CWT and rotated M_band_DT_CWT are designed to improve the texture retrieval performance. Unlike the standard dual tree complex wavelet transform (DT_CWT, which gives a logarithmic frequency resolution, the M-band decomposition gives a mixture of a logarithmic and linear frequency resolution. Most texture image retrieval systems are still incapable of providing retrieval result with high retrieval accuracy and less computational complexity. To address this problem, we propose a novel approach for image retrieval using M_band_DT_CWT and rotated M_band_DT_CWT (M_band_DT_RCWT by computing the energy, standard deviation and their combination on each subband of the decomposed image. To check the retrieval performance, two texture databases are used. Further, it is mentioned that the databases used are Brodatz gray scale database and MIT VisTex Color database. The retrieval efficiency and accuracy using proposed features is found to be superior to other existing methods.

  15. Fractional M-band dual tree complex wavelet transform for digital watermarking

    Indian Academy of Sciences (India)

    Harpal Singh; Lakhwinder Kaur; Kulbir Singh

    2014-04-01

    In this paper, a novel digital watermarking scheme using fractional M-band dual tree complex wavelet transform (Fr-M-band-DT-CWT) is proposed. High frequency channels have wide bandwidth and low frequency channels have narrow bandwidth. These characteristics are suitable for analysing low frequency signal, but not for relatively high frequency signal. The images often contain many edges, which may cause rich middle and high frequency components in the 2-band wavelet domain. Therefore, the ordinary 2-band dual tree complex wavelet transform (DTCWT) is not well-suited for analysing the image. So, the M-band DT-CWT with the FrFT called Fr-M-band-DT-CWT is proposed in this paper to address this problem. Further, we integrate the Fr-M-band-DT-CWT with singular value decomposition (SVD) in order to enhance the performance. Experimental results of the proposed watermarking scheme are compared with the previously available watermarking algorithms, fractional Fourier transform (FrFT), fractional wavelet transform (FrWT). Further, the proposed watermark extraction scheme is also tested on different attacks. The results of the present investigations show that the proposed watermarking scheme is superior as compared to other existing watermarking schemes.

  16. OFF-LINE HANDWRITING RECOGNITION USING VARIOUS HYBRID MODELING TECHNIQUES AND CHARACTER N-GRAMS

    NARCIS (Netherlands)

    Brakensiek, A.; Rottland, J.; Kosmala, A.; Rigoll, G.

    2004-01-01

    In this paper a system for on-line cursive handwriting recognition is described. The system is based on Hidden Markov Models (HMMs) using discrete and hybrid modeling techniques. Here, we focus on two aspects of the recognition system. First, we present different hybrid modeling techniques, whereas

  17. Coupling Turbulence in Hybrid LES-RANS Techniques

    Science.gov (United States)

    Woodruff, Stephen L.

    2011-01-01

    A formulation is proposed for hybrid LES-RANS computations that permits accurate computations during resolution changes, so that resolution may be changed at will in order to employ only as much resolution in each subdomain as is required by the physics. The two components of this formulation, establishing the accuracy of a hybrid model at constant resolutions throughout the RANS-to-LES range and maintaining that accuracy when resolution is varied, are demonstrated for decaying, homogeneous, isotropic turbulence.

  18. Hybrid estimation technique for predicting butene concentration in polyethylene reactor

    Science.gov (United States)

    Mohd Ali, Jarinah; Hussain, M. A.

    2016-03-01

    A component of artificial intelligence (AI), which is fuzzy logic, is combined with the so-called conventional sliding mode observer (SMO) to establish a hybrid type estimator to predict the butene concentration in the polyethylene production reactor. Butene or co-monomer concentration is another significant parameter in the polymerization process since it will affect the molecular weight distribution of the polymer produced. The hybrid estimator offers straightforward formulation of SMO and its combination with the fuzzy logic rules. The error resulted from the SMO estimation will be manipulated using the fuzzy rules to enhance the performance, thus improved on the convergence rate. This hybrid estimation is able to estimate the butene concentration satisfactorily despite the present of noise in the process.

  19. Hybrid computer techniques for solving partial differential equations

    Science.gov (United States)

    Hammond, J. L., Jr.; Odowd, W. M.

    1971-01-01

    Techniques overcome equipment limitations that restrict other computer techniques in solving trivial cases. The use of curve fitting by quadratic interpolation greatly reduces required digital storage space.

  20. A Hybrid Islanding Detection Technique Using Average Rate of Voltage Change and Real Power Shift

    DEFF Research Database (Denmark)

    Mahat, Pukar; Chen, Zhe; Bak-Jensen, Birgitte

    2009-01-01

    technique is proposed to solve this problem. An average rate of voltage change (passive technique) has been used to initiate a real power shift (active technique), which changes the eal power of distributed generation (DG), when the passive technique cannot have a clear discrimination between islanding......The mainly used islanding detection techniques may be classified as active and passive techniques. Passive techniques don't perturb the system but they have larger nondetection znes, whereas active techniques have smaller nondetection zones but they perturb the system. In this paper, a new hybrid...

  1. Direct detection of expanded trinucleotide repeats using DNA hybridization techniques

    Energy Technology Data Exchange (ETDEWEB)

    Petronis, A.; Tatuch, Y.; Kennedy, J.L. [Univ. of Toronto (Canada)] [and others

    1994-09-01

    Recently, unstable trinucleotide repeats have been shown to be the etiologic factor in several neuropsychiatric diseases, and they may play a similar role in other disorders. To our knowledge, a method that detects expanded trinucleotide sequences with the opportunity for direct localization and cloning has not been achieved. We have developed a set of hybridization-based methods for direct detection of unstable DNA expansion. Our analysis of myotonic dystrophy patients that possess different degrees of (CTG){sub n} expansion, versus unaffected controls, has demonstrated the identification of the trinucleotide instability site without any prior information regarding genetic map location. High stringency modified Southern blot hybridization with a PCR-generated trinucleotide repeat probe allowed us to detect the DNA fragment containing the expansion in myotonic dystrophy patients. The same probe was used for fluorescent in situ hybridization and several regions of (CTG){sub n}/(CAG){sub n} repeats in the human genome were detected, including the myotonic dystrophy locus on chromosome 19q. These strategies can be applied to directly clone genes involved in disorders caused by unstable DNA.

  2. Application of asymptotic waveform approximation technique to hybrid FE/BI method for 3D scattering

    Institute of Scientific and Technical Information of China (English)

    PENG Zhen; SHENG XinQing

    2007-01-01

    The asymptotic waveform evaluation (AWE) technique is a rational function approximation method in computational mathematics, which is used in many applications in computational electromagnetics. In this paper, the performance of the AWE technique in conjunction with hybrid finite element/boundary integral (FE/BI) method is firstly investigated. The formulation of the AWE applied in hybrid FE/BI method is given in detail. The characteristic implementation of the application of the AWE to the hybrid FE/BI method is discussed. Numerical results demonstrate that the AWE technique can greatly speed up the hybrid FE/BI method to acquire wide-band and wide-angle backscatter radar-cross-section (RCS) by complex targets.

  3. M-Band Spectra of Dust Embedded Sources at the Galactic Center

    CERN Document Server

    Moultaka, J; Schödel, R

    2009-01-01

    The goal of the present paper is to investigate the circumstellar material around the brightest dust-enshrouded sources in the central stellar cluster of the Milky Way. Observations have been carried out at the European Southern Observatory's Very Large Telescope on Paranal, Chile. We have used the long wavelength (LWS3) low resolution (LR) spectroscopic mode of the ISAAC camera at the VLT in the spectral range of the M filter from 4.4micron to 5.1micron. The use of a slit width of 0.6" implied a spectral resolution of R=l/Dl=800 (Dv=375 km/s). These observations resulted in M-band spectra of 15 bright sources in the central stellar cluster of the Milky Way. In addition to gaseous 12^CO (4.666 micron) and 13^CO (4.77 micron) vibration-rotational absorptions, we detect a strong absorption due to a mixture of polar and apolar CO ice (centered at 4.675 micron). In the shorter wavelength absorption wing there is an absorption feature due to XCN at 4.62 micron. The XCN absorption is strongest toward the M2 supergi...

  4. Resizing Technique-Based Hybrid Genetic Algorithm for Optimal Drift Design of Multistory Steel Frame Buildings

    Directory of Open Access Journals (Sweden)

    Hyo Seon Park

    2014-01-01

    Full Text Available Since genetic algorithm-based optimization methods are computationally expensive for practical use in the field of structural optimization, a resizing technique-based hybrid genetic algorithm for the drift design of multistory steel frame buildings is proposed to increase the convergence speed of genetic algorithms. To reduce the number of structural analyses required for the convergence, a genetic algorithm is combined with a resizing technique that is an efficient optimal technique to control the drift of buildings without the repetitive structural analysis. The resizing technique-based hybrid genetic algorithm proposed in this paper is applied to the minimum weight design of three steel frame buildings. To evaluate the performance of the algorithm, optimum weights, computational times, and generation numbers from the proposed algorithm are compared with those from a genetic algorithm. Based on the comparisons, it is concluded that the hybrid genetic algorithm shows clear improvements in convergence properties.

  5. A Hybrid IMRT/VMAT Technique for the Treatment of Nasopharyngeal Cancer

    Directory of Open Access Journals (Sweden)

    Nan Zhao

    2015-01-01

    Full Text Available Hybrid IMRT/VMAT technique which combined intensity modulated radiotherapy (IMRT and volumetric modulated arc therapy (VMAT was developed for the treatment of nasopharyngeal cancer (NPC. Two-full-arc VMAT (2ARC-VMAT, 9-field IMRT (9F-IMRT, and Hybrid IMRT/VMAT plans for NPC were compared in terms of the dosimetric quality, sparing of organs at risk (OARs, and delivery efficiency. The Hybrid IMRT/VMAT technique can improve the target dose homogeneity and conformity compared with 9F-IMRT and 2ARC-VMAT. It can reduce the dose delivered to the TMJ, mandible, temporal lobe, and unspecified tissue with fewer MUs compared with 9F-IMRT and dose delivered to parotids, brainstem, and spinal cord compared with 2ARC-VMAT technique. The mean delivery time of Hybrid plans was shorter than that of 9F-IMRT plans (408 s versus 812 s; P=0.00 and longer than that of 2ARC-VMAT plans (408 s versus 179 s; P=0.00. Hybrid IMRT/VMAT technique could be a viable radiotherapy technique with better plan quality.

  6. A hybrid IMRT/VMAT technique for the treatment of nasopharyngeal cancer.

    Science.gov (United States)

    Zhao, Nan; Yang, Ruijie; Jiang, Yuliang; Tian, Suqing; Guo, Fuxin; Wang, Junjie

    2015-01-01

    Hybrid IMRT/VMAT technique which combined intensity modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) was developed for the treatment of nasopharyngeal cancer (NPC). Two-full-arc VMAT (2ARC-VMAT), 9-field IMRT (9F-IMRT), and Hybrid IMRT/VMAT plans for NPC were compared in terms of the dosimetric quality, sparing of organs at risk (OARs), and delivery efficiency. The Hybrid IMRT/VMAT technique can improve the target dose homogeneity and conformity compared with 9F-IMRT and 2ARC-VMAT. It can reduce the dose delivered to the TMJ, mandible, temporal lobe, and unspecified tissue with fewer MUs compared with 9F-IMRT and dose delivered to parotids, brainstem, and spinal cord compared with 2ARC-VMAT technique. The mean delivery time of Hybrid plans was shorter than that of 9F-IMRT plans (408 s versus 812 s; P=0.00) and longer than that of 2ARC-VMAT plans (408 s versus 179 s; P=0.00). Hybrid IMRT/VMAT technique could be a viable radiotherapy technique with better plan quality.

  7. A Hybrid IMRT/VMAT Technique for the Treatment of Nasopharyngeal Cancer

    Science.gov (United States)

    Zhao, Nan; Yang, Ruijie; Jiang, Yuliang; Tian, Suqing; Guo, Fuxin; Wang, Junjie

    2015-01-01

    Hybrid IMRT/VMAT technique which combined intensity modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) was developed for the treatment of nasopharyngeal cancer (NPC). Two-full-arc VMAT (2ARC-VMAT), 9-field IMRT (9F-IMRT), and Hybrid IMRT/VMAT plans for NPC were compared in terms of the dosimetric quality, sparing of organs at risk (OARs), and delivery efficiency. The Hybrid IMRT/VMAT technique can improve the target dose homogeneity and conformity compared with 9F-IMRT and 2ARC-VMAT. It can reduce the dose delivered to the TMJ, mandible, temporal lobe, and unspecified tissue with fewer MUs compared with 9F-IMRT and dose delivered to parotids, brainstem, and spinal cord compared with 2ARC-VMAT technique. The mean delivery time of Hybrid plans was shorter than that of 9F-IMRT plans (408 s versus 812 s; P = 0.00) and longer than that of 2ARC-VMAT plans (408 s versus 179 s; P = 0.00). Hybrid IMRT/VMAT technique could be a viable radiotherapy technique with better plan quality. PMID:25688371

  8. Test and numerical simulation of a new type of hybrid control technique

    Institute of Scientific and Technical Information of China (English)

    Meng Qingli; Zhang Minzheng; Cheng Dong

    2005-01-01

    In this paper, a new hybrid control technique, based on a combination of base-isolation and semi-active variable stiffness/damping in a superstructure, is presented. To illustrate the efficiency of the proposed control system, model tests on a mini-electromagnetic shaking table and a numerical simulation were performed. The test and numerical calculation results indicate that this new hybrid control mode with additional damping and smaller additional stiffness can achieve a better control efficiency.

  9. Management of internal resorption of central incisor using hybrid technique.

    Science.gov (United States)

    Gayathri, Prabakaran; Pandey, Ramesh Kumar; Jain, Eesha

    2014-01-28

    Internal inflammatory root resorption is characterised by progressive destruction of intraradicular dentin and dentinal tubules along the root canal wall. A number of theories have been proposed as a possible cause for internal resorption. It is usually asymptomatic and detected during routine radiographic investigations. Prompt diagnosis and early management of such defects is essential to maintain the integrity of the tooth. Non-surgical and surgical methods are the two main strategies involved in the management of internal resorption. The non-surgical method is usually preferred, but in cases of extensive resorption with external root perforation, surgical intervention has been advocated. The present case illustrates repair of perforating internal resorption by hybrid method, using mineral trioxide aggregate and gutta-percha, following surgical exposure. After a 10-month follow-up, no clinical and radiographic abnormalities were observed. Additionally, there was also marked reduction in periodontal pocket depth.

  10. Constrained Optimization Based on Hybrid Evolutionary Algorithm and Adaptive Constraint-Handling Technique

    DEFF Research Database (Denmark)

    Wang, Yong; Cai, Zixing; Zhou, Yuren

    2009-01-01

    A novel approach to deal with numerical and engineering constrained optimization problems, which incorporates a hybrid evolutionary algorithm and an adaptive constraint-handling technique, is presented in this paper. The hybrid evolutionary algorithm simultaneously uses simplex crossover and two...... mutation operators to generate the offspring population. Additionally, the adaptive constraint-handling technique consists of three main situations. In detail, at each situation, one constraint-handling mechanism is designed based on current population state. Experiments on 13 benchmark test functions...... and four well-known constrained design problems verify the effectiveness and efficiency of the proposed method. The experimental results show that integrating the hybrid evolutionary algorithm with the adaptive constraint-handling technique is beneficial, and the proposed method achieves competitive...

  11. Large-scale multi-zone optimal power dispatch using hybrid hierarchical evolution technique

    Directory of Open Access Journals (Sweden)

    Manjaree Pandit

    2014-03-01

    Full Text Available A new hybrid technique based on hierarchical evolution is proposed for large, non-convex, multi-zone economic dispatch (MZED problems considering all practical constraints. Evolutionary/swarm intelligence-based optimisation techniques are reported to be effective only for small/medium-sized power systems. The proposed hybrid hierarchical evolution (HHE algorithm is specifically developed for solving large systems. The HHE integrates the exploration and exploitation capabilities of particle swarm optimisation and differential evolution in a novel manner such that the search efficiency is improved substantially. Most hybrid techniques export or exchange features or operations from one algorithm to the other, but in HHE their entire individual features are retained. The effectiveness of the proposed algorithm has been verified on six-test systems having different sizes and complexity levels. Non-convex MZED solution for such large and complex systems has not yet been reported.

  12. Single Molecule Techniques for Advanced in situ Hybridization

    Energy Technology Data Exchange (ETDEWEB)

    Hollars, C W; Stubbs, L; Carlson, K; Lu, X; Wehri, E

    2003-02-03

    One of the most significant achievements of modern science is completion of the human genome sequence, completed in the year 2000. Despite this monumental accomplishment, researchers have only begun to understand the relationships between this three-billion-nucleotide genetic code and the regulation and control of gene and protein expression within each of the millions of different types of highly specialized cells. Several methodologies have been developed for the analysis of gene and protein expression in situ, yet despite these advancements, the pace of such analyses is extremely limited. Because information regarding the precise timing and location of gene expression is a crucial component in the discovery of new pharmacological agents for the treatment of disease, there is an enormous incentive to develop technologies that accelerate the analytical process. Here we report on the use of plasmon resonant particles as advanced probes for in situ hybridization. These probes are used for the detection of low levels of gene-probe response and demonstrate a detection method that enables precise, simultaneous localization within a cell of the points of expression of multiple genes or proteins in a single sample.

  13. A hybrid classifier using the parallelepiped and Bayesian techniques. [for multispectral image data

    Science.gov (United States)

    Addington, J. D.

    1975-01-01

    A versatile classification scheme is developed which uses the best features of the parallelepiped algorithm and the Bayesian maximum likelihood algorithm. The parallelepiped technique has the advantage of being very fast, especially when implemented into a table look-up scheme; its disadvantage is its inability to distinguish and classify spectral signatures which are similar in nature. This disadvantage is eliminated by the Bayesian technique which is capable of distinguishing subtle differences very well. The hybrid algorithm developed reduces computer time by as much as 90%. A two- and n-dimensional description of the hybrid classifier is given.

  14. Brain tumor segmentation based on a hybrid clustering technique

    Directory of Open Access Journals (Sweden)

    Eman Abdel-Maksoud

    2015-03-01

    This paper presents an efficient image segmentation approach using K-means clustering technique integrated with Fuzzy C-means algorithm. It is followed by thresholding and level set segmentation stages to provide an accurate brain tumor detection. The proposed technique can get benefits of the K-means clustering for image segmentation in the aspects of minimal computation time. In addition, it can get advantages of the Fuzzy C-means in the aspects of accuracy. The performance of the proposed image segmentation approach was evaluated by comparing it with some state of the art segmentation algorithms in case of accuracy, processing time, and performance. The accuracy was evaluated by comparing the results with the ground truth of each processed image. The experimental results clarify the effectiveness of our proposed approach to deal with a higher number of segmentation problems via improving the segmentation quality and accuracy in minimal execution time.

  15. Comparison of hybrid volumetric modulated arc therapy (VMAT technique and double arc VMAT technique in the treatment of prostate cancer

    Directory of Open Access Journals (Sweden)

    Amaloo Christopher

    2015-09-01

    Full Text Available Background. Volumetric modulated arc therapy (VMAT has quickly become accepted as standard of care for the treatment of prostate cancer based on studies showing it is able to provide faster delivery with adequate target coverage and reduced monitor units while maintaining organ at risk (OAR sparing. This study aims to demonstrate the potential to increase dose conformality with increased planner control and OAR sparing using a hybrid treatment technique compared to VMAT.

  16. HybridArc: A novel radiation therapy technique combining optimized dynamic arcs and intensity modulation

    Energy Technology Data Exchange (ETDEWEB)

    Robar, James L., E-mail: james.robar@cdha.nshealth.ca [Department of Radiation Oncology, Dalhousie University, Halifax (Canada); Department of Physics and Atmospheric Science, Dalhousie University, Halifax (Canada); Thomas, Christopher [Department of Radiation Oncology, Dalhousie University, Halifax (Canada)

    2012-01-01

    This investigation focuses on possible dosimetric and efficiency advantages of HybridArc-a novel treatment planning approach combining optimized dynamic arcs with intensity-modulated radiation therapy (IMRT) beams. Application of this technique to two disparate sites, complex cranial tumors, and prostate was examined. HybridArc plans were compared with either dynamic conformal arc (DCA) or IMRT plans to determine whether HybridArc offers a synergy through combination of these 2 techniques. Plans were compared with regard to target volume dose conformity, target volume dose homogeneity, sparing of proximal organs at risk, normal tissue sparing, and monitor unit (MU) efficiency. For cranial cases, HybridArc produced significantly improved dose conformity compared with both DCA and IMRT but did not improve sparing of the brainstem or optic chiasm. For prostate cases, conformity was improved compared with DCA but not IMRT. Compared with IMRT, the dose homogeneity in the planning target volume was improved, and the maximum doses received by the bladder and rectum were reduced. Both arc-based techniques distribute peripheral dose over larger volumes of normal tissue compared with IMRT, whereas HybridArc involved slightly greater volumes of normal tissues compared with DCA. Compared with IMRT, cranial cases required 38% more MUs, whereas for prostate cases, MUs were reduced by 7%. For cranial cases, HybridArc improves dose conformity to the target. For prostate cases, dose conformity and homogeneity are improved compared with DCA and IMRT, respectively. Compared with IMRT, whether required MUs increase or decrease with HybridArc was site-dependent.

  17. A Hybrid Neural Network-Genetic Algorithm Technique for Aircraft Engine Performance Diagnostics

    Science.gov (United States)

    Kobayashi, Takahisa; Simon, Donald L.

    2001-01-01

    In this paper, a model-based diagnostic method, which utilizes Neural Networks and Genetic Algorithms, is investigated. Neural networks are applied to estimate the engine internal health, and Genetic Algorithms are applied for sensor bias detection and estimation. This hybrid approach takes advantage of the nonlinear estimation capability provided by neural networks while improving the robustness to measurement uncertainty through the application of Genetic Algorithms. The hybrid diagnostic technique also has the ability to rank multiple potential solutions for a given set of anomalous sensor measurements in order to reduce false alarms and missed detections. The performance of the hybrid diagnostic technique is evaluated through some case studies derived from a turbofan engine simulation. The results show this approach is promising for reliable diagnostics of aircraft engines.

  18. Hybrid inverse lithography techniques for advanced hierarchical memories

    Science.gov (United States)

    Xiao, Guangming; Hooker, Kevin; Irby, Dave; Zhang, Yunqiang; Ward, Brian; Cecil, Tom; Hall, Brett; Lee, Mindy; Kim, Dave; Lucas, Kevin

    2014-03-01

    Traditional segment-based model-based OPC methods have been the mainstream mask layout optimization techniques in volume production for memory and embedded memory devices for many device generations. These techniques have been continually optimized over time to meet the ever increasing difficulties of memory and memory periphery patterning. There are a range of difficult issues for patterning embedded memories successfully. These difficulties include the need for a very high level of symmetry and consistency (both within memory cells themselves and between cells) due to circuit effects such as noise margin requirements in SRAMs. Memory cells and access structures consume a large percentage of area in embedded devices so there is a very high return from shrinking the cell area as much as possible. This aggressive scaling leads to very difficult resolution, 2D CD control and process window requirements. Additionally, the range of interactions between mask synthesis corrections of neighboring areas can extend well beyond the size of the memory cell, making it difficult to fully take advantage of the inherent designed cell hierarchy in mask pattern optimization. This is especially true for non-traditional (i.e., less dependent on geometric rule) OPC/RET methods such as inverse lithography techniques (ILT) which inherently have more model-based decisions in their optimizations. New inverse methods such as model-based SRAF placement and ILT are, however, well known to have considerable benefits in finding flexible mask pattern solutions to improve process window, improve 2D CD control, and improve resolution in ultra-dense memory patterns. They also are known to reduce recipe complexity and provide native MRC compliant mask pattern solutions. Unfortunately, ILT is also known to be several times slower than traditional OPC methods due to the increased computational lithographic optimizations it performs. In this paper, we describe and present results for a methodology to

  19. A Robust Hybrid Video Watermarking Technique using Mosaicing

    Directory of Open Access Journals (Sweden)

    Jeebananda Panda

    2014-10-01

    Full Text Available Video Watermarking is the technique by which some information is inserted in the video which can be extracted later. It provides protection against any kind of illegal manipulation by third party. In this paper , a non -blind watermarking scheme is proposed which is based on the combination of Discrete Wavelet Transform,(DWT, Discrete Cosine Transform (DCT and Singular Value Decomposition (SVD.The watermark is embedded in the mosaic formed from the frames of the video by modifying the DCT coefficients of LL1 (low frequency sub-band obtained by applying 1-level DWT on the mosaic followed by diagonal based modification of singular value matrix which is obtained by SVD decomposition of LL2 (low frequency sub-band obtained by applying 2-level DWT on the modified LL1.The experimental values of PSNR, Correlation Factor show that the above proposed scheme is imperceptible, secure and robust against various types of attacks.

  20. High performance technique for database applicationsusing a hybrid GPU/CPU platform

    KAUST Repository

    Zidan, Mohammed A.

    2012-07-28

    Many database applications, such as sequence comparing, sequence searching, and sequence matching, etc, process large database sequences. we introduce a novel and efficient technique to improve the performance of database applica- tions by using a Hybrid GPU/CPU platform. In particular, our technique solves the problem of the low efficiency result- ing from running short-length sequences in a database on a GPU. To verify our technique, we applied it to the widely used Smith-Waterman algorithm. The experimental results show that our Hybrid GPU/CPU technique improves the average performance by a factor of 2.2, and improves the peak performance by a factor of 2.8 when compared to earlier implementations. Copyright © 2011 by ASME.

  1. A Proposed Hybrid Technique for Recognizing Arabic Characters

    Directory of Open Access Journals (Sweden)

    S F Bahgat

    2012-07-01

    Full Text Available Optical character recognition systems improve human-machine interaction and are urgently required for many governmental and commercial departments. A considerable progress in the recognition techniques of Latin and Chinese characters has been achieved. By contrast, Arabic Optical Character Recognition (AOCR is still lagging although the interest and research in this area is becoming more intensive than before. This is because the Arabic is a cursive language, written from right to left, each character has two to four different forms according to its position in the word, and most characters are associated with complementary parts above, below, or inside the character. The process of Arabic character recognition passes through several stages; the most serious and error-prone of which are segmentation, and feature extraction & classification. This research focuses on the feature extraction and classification stage, being as important as the segmentation stage. Features can be classified into two categories; Local features, which are usually geometric, and Global features, which are either topological or statistical. Four approaches related to the statistical category are to be investigated, namely: Moment Invariants, Gray Level Co-occurrence Matrix, Run Length Matrix, and Statistical Properties of Intensity Histogram. The paper aims at fusing the features of these methods to get the most representative feature vector that maximizes the recognition rate.

  2. Locomotion training of legged robots using hybrid machine learning techniques

    Science.gov (United States)

    Simon, William E.; Doerschuk, Peggy I.; Zhang, Wen-Ran; Li, Andrew L.

    1995-01-01

    In this study artificial neural networks and fuzzy logic are used to control the jumping behavior of a three-link uniped robot. The biped locomotion control problem is an increment of the uniped locomotion control. Study of legged locomotion dynamics indicates that a hierarchical controller is required to control the behavior of a legged robot. A structured control strategy is suggested which includes navigator, motion planner, biped coordinator and uniped controllers. A three-link uniped robot simulation is developed to be used as the plant. Neurocontrollers were trained both online and offline. In the case of on-line training, a reinforcement learning technique was used to train the neurocontroller to make the robot jump to a specified height. After several hundred iterations of training, the plant output achieved an accuracy of 7.4%. However, when jump distance and body angular momentum were also included in the control objectives, training time became impractically long. In the case of off-line training, a three-layered backpropagation (BP) network was first used with three inputs, three outputs and 15 to 40 hidden nodes. Pre-generated data were presented to the network with a learning rate as low as 0.003 in order to reach convergence. The low learning rate required for convergence resulted in a very slow training process which took weeks to learn 460 examples. After training, performance of the neurocontroller was rather poor. Consequently, the BP network was replaced by a Cerebeller Model Articulation Controller (CMAC) network. Subsequent experiments described in this document show that the CMAC network is more suitable to the solution of uniped locomotion control problems in terms of both learning efficiency and performance. A new approach is introduced in this report, viz., a self-organizing multiagent cerebeller model for fuzzy-neural control of uniped locomotion is suggested to improve training efficiency. This is currently being evaluated for a possible

  3. FREQUENCY OPTIMIZATION APPROACH FOR DESIGNING M-BAND BIORTHOGONAL SYMMETRIC WAVELETS%M进制双正交对称小波的频率优化设计

    Institute of Scientific and Technical Information of China (English)

    王建卫; 张泽银; 黄达人

    2003-01-01

    In this paper, a new method is presented for designing M-band biorthogonalsymmetric waveletsThe design problem of biorthogonal linear-phase scaling filters and waveletfilters as a quadratic programming problem with the linear constraints is formulatedTheclosed-form solution is given and a design example is presented.

  4. GA and PSO culled hybrid technique for economic dispatch problem with prohibited operating zones

    Institute of Scientific and Technical Information of China (English)

    SUDHAKARAN M.; AJAY-D-VIMALRAJ P.; PALANIVELU T.G.

    2007-01-01

    This paper presents an efficient and reliable genetic algorithm (GA) based particle swarm optimization (PSO) technique (hybrid GAPSO) for solving the economic dispatch (ED) problem in power systems. The non-linear characteristics of the generators, such as prohibited operating zones, ramp rate limits and non-smooth cost functions of the practical generator operation are considered. The proposed hybrid algorithm is demonstrated for three different systems and the performance is compared with the GA and PSO in terms of solution quality and computation efficiency. Comparison of results proved that the proposed algorithm can obtain higher quality solutions efficiently in ED problems. A comprehensive software package is developed using MATLAB.

  5. Indirect porcelain veneers in periodontally compromised teeth. The hybrid technique: a case report.

    Science.gov (United States)

    Garcia-Baeza, David; Saavedra, Carlos; Garcia-Adámez, Ramón

    2015-01-01

    The loss of periodontal structure causes an esthetic problem for many patients, especially when the esthetic zone is compromised. Among the various types of solutions is the use of composite resins. While this procedure is not aggressive towards tooth structure, it does require the clinician to have a precise technique, and demands strict longterm maintenance. 1 Another way of treating the compromised teeth is with porcelain veneers. This procedure is especially difficult, however, if carried out on periodontal teeth, as it requires preparation along the roots. 2 The intention of the hybrid technique described in this article is to combine both of these procedures in order to obtain a less aggressive treatment with precise management of the soft tissue and an adequate esthetic outcome. The hybrid technique consists of enlarging the root portion of the teeth with composite resin to obtain a less aggressive tooth preparation, and thereafter placing porcelain veneers.

  6. 3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique.

    Science.gov (United States)

    Chiappone, Annalisa; Fantino, Erika; Roppolo, Ignazio; Lorusso, Massimo; Manfredi, Diego; Fino, Paolo; Pirri, Candido Fabrizio; Calignano, Flaviana

    2016-03-02

    In this work, three-dimensional (3D) structured hybrid materials were fabricated combining 3D printing technology with in situ generation of inorganic nanoparticles by sol-gel technique. Those materials, consisting of silica nanodomains covalently interconnected with organic polymers, were 3D printed in complex multilayered architectures, incorporating liquid silica precursors into a photocurable oligomer in the presence of suitable photoinitiators and exposing them to a digital light system. A post sol-gel treatment in acidic vapors allowed the in situ generation of the inorganic phase in a dedicated step. This method allows to build hybrid structures operating with a full liquid formulation without meeting the drawbacks of incorporating inorganic powders into 3D printable formulations. The influence of the generated silica nanoparticle on the printed objects was deeply investigated at macro- and nanoscale; the resulting light hybrid structures show improved mechanical properties and, thus, have a huge potential for applications in a variety of advanced technologies.

  7. Closure technique for the hybrid girder cable stayed bridge of Edong Bridge

    Institute of Scientific and Technical Information of China (English)

    Liu Minghu; Tan Hao; Xu GuoPing; Zhao Canhui

    2012-01-01

    Based on Edong Yangtze River Bridge, which is the second longest hybrid girder cable stayed bridge with 926 m long main span, the influencing factors and crucial techniques of the main span closure method for long span hybrid girder cable stayed bridge are studied. After theoretical analysis, numerical evaluation and practical test, the loading assistant closure method is employed in Edong Yangtze River Bridge. The loading assistant closure method, with better thermal adaptability and less influence on bridge line and the forced status, can meet the requirements of the unstressed state control method. Based on the mentioned advantages, the loading assistant closure method is applicable to long span hybrid girder cable stayed bridges. The conclusion can provide a reference for the further design of the similar brid~es.

  8. A new hybrid jpeg image compression scheme using symbol reduction technique

    CERN Document Server

    Kumar, Bheshaj; Sinha, G R

    2012-01-01

    Lossy JPEG compression is a widely used compression technique. Normally the JPEG standard technique uses three process mapping reduces interpixel redundancy, quantization, which is lossy process and entropy encoding, which is considered lossless process. In this paper, a new technique has been proposed by combining the JPEG algorithm and Symbol Reduction Huffman technique for achieving more compression ratio. The symbols reduction technique reduces the number of symbols by combining together to form a new symbol. As a result of this technique the number of Huffman code to be generated also reduced. It is simple fast and easy to implement. The result shows that the performance of standard JPEG method can be improved by proposed method. This hybrid approach achieves about 20% more compression ratio than the Standard JPEG.

  9. Hybrid single-beam reconstruction technique for slow and fast varying wave fields.

    Science.gov (United States)

    Falaggis, Konstantinos; Kozacki, Tomasz; Kujawinska, Malgorzata

    2015-06-01

    An iterative single-beam wave field reconstruction technique that employs both non-paraxial, wave propagation based and paraxial deterministic phase retrieval techniques is presented. This approach overcomes two major obstacles that exist in the current state of the art techniques: iterative methods do not reconstruct slowly varying wave fields due to slow convergence and stagnation, and deterministic methods have paraxial limits, making the reconstructions of quickly varying object features impossible. In this work, a hybrid approach is reported that uses paraxial wave field corrections within iterative phase retrieval solvers. This technique is suitable for cases ranging from slow to fast varying wave fields, and unlike the currently available methods, can also reconstruct measurement objects with different regions of both slowly and quickly varying object features. It is further shown that this technique gives a higher accuracy than current single-beam phase retrieval techniques, and in comparison to the iterative methods, has a higher convergence speed.

  10. Sample preparation and in situ hybridization techniques for automated molecular cytogenetic analysis of white blood cells

    Energy Technology Data Exchange (ETDEWEB)

    Rijke, F.M. van de; Vrolijk, H.; Sloos, W. [Leiden Univ. (Netherlands)] [and others

    1996-06-01

    With the advent in situ hybridization techniques for the analysis of chromosome copy number or structure in interphase cells, the diagnostic and prognostic potential of cytogenetics has been augmented considerably. In theory, the strategies for detection of cytogenetically aberrant cells by in situ hybridization are simple and straightforward. In practice, however, they are fallible, because false classification of hybridization spot number or patterns occurs. When a decision has to be made on molecular cytogenetic normalcy or abnormalcy of a cell sample, the problem of false classification becomes particularly prominent if the fraction of aberrant cells is relatively small. In such mosaic situations, often > 200 cells have to be evaluated to reach a statistical sound figure. The manual enumeration of in situ hybridization spots in many cells in many patient samples is tedious. Assistance in the evaluation process by automation of microscope functions and image analysis techniques is, therefore, strongly indicated. Next to research and development of microscope hardware, camera technology, and image analysis, the optimization of the specimen for the (semi)automated microscopic analysis is essential, since factors such as cell density, thickness, and overlap have dramatic influences on the speed and complexity of the analysis process. Here we describe experiments that have led to a protocol for blood cell specimen that results in microscope preparations that are well suited for automated molecular cytogenetic analysis. 13 refs., 4 figs., 1 tab.

  11. Biomechanical comparison of interference screw and cortical button with screw hybrid technique for distal biceps brachii tendon repair.

    Science.gov (United States)

    Arianjam, Afshin; Camisa, William; Leasure, Jeremi M; Montgomery, William H

    2013-11-01

    Various fixation techniques have been described for ruptured distal biceps tendons. The authors hypothesized that no significant differences would be found between the mean failure strength, maximum strength, and stiffness of the interference screw and hybrid technique. Fourteen fresh-frozen human cadaveric elbows were prepared. Specimens were randomized to either interference screw or hybrid cortical button with screw fixation. The tendon was pulled at a rate of 4 mm/s until failure. Failure strength, maximum strength, and stiffness were measured and compared. Failure strength, maximum strength, and stiffness were 294±81.9 N, 294±82.1 N, and 64.4±40.5 N/mm, respectively, for the interference screw technique and 333±129 N, 383±121 N, and 56.2±40.5 N/mm, respectively, for the hybrid technique. No statistically significant difference existed between the screw and hybrid technique in failure strength, maximum strength, or stiffness (P>.05). The interference screws primarily failed by pullout of the screw and tendon, whereas in the hybrid technique, failure occurred with screw pullout followed by tearing of the biceps tendon. The results suggest that this hybrid technique is nearly as strong and stiff as the interference screw alone. Although the hybrid technique facilitates tensioning of the reconstructed tendon, the addition of the cortical button did not significantly improve the failure strength of the interference screw alone. Copyright 2013, SLACK Incorporated.

  12. A DG Implementation of a Novel Hybrid RANS/LES Technique With RANS Reconstruction

    CERN Document Server

    Abbà, Antonella; Nini, Michele; Restelli, Marco

    2014-01-01

    A new hybrid RANS/LES technique, based on the hybrid filter proposed by Germano in 2004, has been studied. The novelty herein introduced is represented by the reconstruction of the Reynolds stress tensor. As a consequence, no explicit RANS model is needed. The RANS and LES terms are merged using a constant blending factor. The model is implemented in a numerical code based on a high order Discontinuous Galerkin (DG) finite element formulation. The test case considered for numerical simulations is the turbulent tur- bulent channel flow at Mach = 0.2. The comparison with available DNS data shows a good agreement and, in general, an improvement with re- spect to pure LES results, confirming that the technique herein proposed represents a promising approach to the numerical simulation of turbulent flows.

  13. Detection of chromosome aberrations in interphase nuclei using fluorescence in situ hybridization technique.

    OpenAIRE

    1993-01-01

    We report here several experiences of interphase cytogenetics, using fluorescence in situ hybridization (FISH) technique, for the detection of chromosome aberrations. FISH, using alpha satellite specific probes of 18, X, Y chromosomes, was done in interphase nuclei from peripheral blood of patients with Edwards' syndrome, Klinefelter's syndrome and Turner's syndrome with healthy male and female controls, respectively. The distributions of fluorescent signals in 100 interphase nuclei were well...

  14. A low-loss hybrid rectification technique for piezoelectric energy harvesting

    Science.gov (United States)

    Schlichting, A. D.; Fink, E.; Garcia, E.

    2013-09-01

    Embedded systems have decreased in size and increased in capability; however, small-scale energy storage technologies still significantly limit these advances. Energy neutral operation using small-scale energy harvesting technologies would allow for longer device operation times and smaller energy storage masses. Vibration energy harvesting is an attractive method due to the prevalence of energy sources in many environments. Losses in efficiency due to AC-DC rectification and conditioning circuits limit its application. This work presents a low-loss hybrid rectification technique for piezoelectric vibration energy harvesting using magnetically actuated reed switches and a passive semiconductor full-bridge rectifier. This method shows the capability to have higher efficiency levels and the rectification of low-voltage harvesters without the need for active electrical components. A theoretical model shows that the hybrid rectification technique performance is highly dependent on the proximity delay and the hysteresis behavior of the reed switches. Experimental results validate the model and support the hypothesis of increased performance using the hybrid rectification technique.

  15. A Comparison of Redundancy Techniques for Private and Hybrid Cloud Storage

    Directory of Open Access Journals (Sweden)

    E.M. Hernandez-Ramirez

    2012-11-01

    Full Text Available File redundancy techniques have been very useful mechanisms for offering fault tolerance and data availability in anykind of storage. Cloud storage is not the exception. This paper presents an evaluation of classical file redundancytechniques implemented in two cloud-storage deployment models, private and hybrid. A small prototype of a privateand hybrid cloud storage was implemented for this evaluation. The performance impact when file redundancy is onlyapplied in a private cloud versus when redundancy is also distributed in a public cloud (the hybrid model is analyzed.Additional to classical file redundancy techniques, an innovative method was evaluated for file redundancy based onan information dispersal algorithm (IDA. The usage of IDA represents a good option for managing sensitive data inhybrid cloud storage. In this technique, only parts of a file need to be sent to the public cloud, avoiding the completefile to be read from outside of the private zone. In this context, there is a trade-off between performance (forreconstructing the original file, it is first necessary to obtain all of its fragments and the security level that coulddetermine the viability of using IDA.

  16. High capacity fiber optic sensor networks using hybrid multiplexing techniques and their applications

    Science.gov (United States)

    Sun, Qizhen; Li, Xiaolei; Zhang, Manliang; Liu, Qi; Liu, Hai; Liu, Deming

    2013-12-01

    Fiber optic sensor network is the development trend of fiber senor technologies and industries. In this paper, I will discuss recent research progress on high capacity fiber sensor networks with hybrid multiplexing techniques and their applications in the fields of security monitoring, environment monitoring, Smart eHome, etc. Firstly, I will present the architecture of hybrid multiplexing sensor passive optical network (HSPON), and the key technologies for integrated access and intelligent management of massive fiber sensor units. Two typical hybrid WDM/TDM fiber sensor networks for perimeter intrusion monitor and cultural relics security are introduced. Secondly, we propose the concept of "Microstructure-Optical X Domin Refecltor (M-OXDR)" for fiber sensor network expansion. By fabricating smart micro-structures with the ability of multidimensional encoded and low insertion loss along the fiber, the fiber sensor network of simple structure and huge capacity more than one thousand could be achieved. Assisted by the WDM/TDM and WDM/FDM decoding methods respectively, we built the verification systems for long-haul and real-time temperature sensing. Finally, I will show the high capacity and flexible fiber sensor network with IPv6 protocol based hybrid fiber/wireless access. By developing the fiber optic sensor with embedded IPv6 protocol conversion module and IPv6 router, huge amounts of fiber optic sensor nodes can be uniquely addressed. Meanwhile, various sensing information could be integrated and accessed to the Next Generation Internet.

  17. A HYBRID TECHNIQUE FOR FREQUENCY DOMAIN IDENTIFICATION OF SERVO SYSTEM WITH FRICTION FORCE

    Directory of Open Access Journals (Sweden)

    SHAIK.RAFI KIRAN,

    2011-03-01

    Full Text Available The system identification process in servo system with frictional force seems to be a complex task becauseof its non-linear nature. For such non-linear systems, a good choice is system identification in frequencydomain. However, most of the techniques are manual and are inappropriate for determination of systemparameters. This makes system identification ineffective for servo systems with frictional force. Toovercome this issue, a hybrid technique is proposed in this paper. The proposed technique exploits neuralnetwork and genetic algorithm to determine the system parameters of servo systems with friction. In theproposed technique, the target parameters are determined from the transfer function derived for thesystem. Subsequently, the system parameters are identified by a process formed by blending the neuralnetwork and genetic algorithm techniques. Prior to performing the identification procedure, backpropagation training is given to the neural network using a pre-examined dataset. Then with thecombined operation of neural network and genetic algorithm, the system parameters that are closer tothe target parameters for the servo system with frictional force are determined. The technique isimplemented and compared with the existing frequency domain identification technique. From thecomparative results, it is evident that the proposed technique outperforms the existing technique.

  18. Recent Developments on Hybrid Time-Frequency Numerical Simulation Techniques for RF and Microwave Applications

    Directory of Open Access Journals (Sweden)

    Jorge F. Oliveira

    2013-01-01

    Full Text Available This paper reviews some of the promising doors that functional analysis techniques have recently opened in the field of electronic circuit simulation. Because of the modulated nature of radio frequency (RF signals, the corresponding electronic circuits seem to operate in a slow time scale for the aperiodic information and another, much faster, time scale for the periodic carrier. This apparent multirate behavior can be appropriately described using partial differential equations (PDEs within a bivariate framework, which can be solved in an efficient way using hybrid time-frequency techniques. With these techniques, the aperiodic information dimension is treated in the discrete time domain, while the periodic carrier dimension is processed in the frequency domain, in which the solution is evaluated within a space of harmonically related sinusoidal functions. The objective of this paper is thus to provide a general overview on the most important hybrid time-frequency techniques, as the ones found in commercial tools or the ones recently published in the literature.

  19. Hybrid machine learning technique for forecasting Dhaka stock market timing decisions.

    Science.gov (United States)

    Banik, Shipra; Khodadad Khan, A F M; Anwer, Mohammad

    2014-01-01

    Forecasting stock market has been a difficult job for applied researchers owing to nature of facts which is very noisy and time varying. However, this hypothesis has been featured by several empirical experiential studies and a number of researchers have efficiently applied machine learning techniques to forecast stock market. This paper studied stock prediction for the use of investors. It is always true that investors typically obtain loss because of uncertain investment purposes and unsighted assets. This paper proposes a rough set model, a neural network model, and a hybrid neural network and rough set model to find optimal buy and sell of a share on Dhaka stock exchange. Investigational findings demonstrate that our proposed hybrid model has higher precision than the single rough set model and the neural network model. We believe this paper findings will help stock investors to decide about optimal buy and/or sell time on Dhaka stock exchange.

  20. Step Response Enhancement of Hybrid Stepper Motors Using Soft Computing Techniques

    Directory of Open Access Journals (Sweden)

    Amged S. El-Wakeel

    2014-05-01

    Full Text Available This paper presents the use of different soft computing techniques for step response enhancement of Hybrid Stepper Motors. The basic differential equations of hybrid stepper motor are used to build up a model using MATLAB software package. The implementation of Fuzzy Logic (FL and Proportional-Integral-Derivative (PID controllers are used to improve the motor performance. The numerical simulations by a PC-based controller show that the PID controller tuned by Genetic Algorithm (GA produces better performance than that tuned by Fuzzy controller. They show that, the Fuzzy PID-like controller produces better performance than the other linear Fuzzy controllers. Finally, the comparison between PID controllers tuned by genetic algorithm and the Fuzzy PID-like controller shows that, the Fuzzy PID-like controller produces better performance.

  1. Hybrid PIV-PTV technique for measuring blood flow in rat mesenteric vessels.

    Science.gov (United States)

    Ha, Hojin; Nam, Kweon-Ho; Lee, Sang Joon

    2012-11-01

    The micro-particle tracking velocimetry (μ-PTV) technique is used to obtain the velocity fields of blood flow in the microvasculature under in vivo conditions because it can provide the blood velocity distribution in microvessels with high spatial resolution. The in vivo μ-PTV technique usually requires a few to tens of seconds to obtain a whole velocity profile across the vessel diameter because of the limited number density of tracer particles under in vivo conditions. Thus, the μ-PTV technique alone is limited in measuring unsteady blood flows that fluctuate irregularly due to the heart beating and muscle movement in surrounding tissues. In this study, a new hybrid PIV-PTV technique was established by combining PTV and particle image velocimetry (PIV) techniques to resolve the drawbacks of the μ-PTV method in measuring blood flow in microvessels under in vivo conditions. Images of red blood cells (RBCs) and fluorescent particles in rat mesenteric vessels were obtained simultaneously. Temporal variations of the centerline blood velocity were monitored using a fast Fourier transform-based cross-correlation PIV method. The fluorescence particle images were analyzed using the μ-PTV technique to extract the spatial distribution of the velocity vectors. Data from the μ-PTV and PIV methods were combined to obtain a better estimate of the velocity profile in actual blood flow. This technique will be useful in investigating hemodynamics in microcirculation by measuring unsteady irregular blood flows more accurately.

  2. A Low Cost Vision Based Hybrid Fiducial Mark Tracking Technique for Mobile Industrial Robots

    Directory of Open Access Journals (Sweden)

    Mohammed Y Aalsalem

    2012-07-01

    Full Text Available The field of robotic vision is developing rapidly. Robots can react intelligently and provide assistance to user activities through sentient computing. Since industrial applications pose complex requirements that cannot be handled by humans, an efficient low cost and robust technique is required for the tracking of mobile industrial robots. The existing sensor based techniques for mobile robot tracking are expensive and complex to deploy, configure and maintain. Also some of them demand dedicated and often expensive hardware. This paper presents a low cost vision based technique called “Hybrid Fiducial Mark Tracking” (HFMT technique for tracking mobile industrial robot. HFMT technique requires off-the-shelf hardware (CCD cameras and printable 2-D circular marks used as fiducials for tracking a mobile industrial robot on a pre-defined path. This proposed technique allows the robot to track on a predefined path by using fiducials for the detection of Right and Left turns on the path and White Strip for tracking the path. The HFMT technique is implemented and tested on an indoor mobile robot at our laboratory. Experimental results from robot navigating in real environments have confirmed that our approach is simple and robust and can be adopted in any hostile industrial environment where humans are unable to work.

  3. Design and Development of Hybrid Multilevel Inverter employing Dual Reference Modulation Technique for Fuel Cell Applications

    Directory of Open Access Journals (Sweden)

    R. Seyezhai

    2011-10-01

    Full Text Available MultiLevel Inverter (MLI has been recognized as an attractive topology for high voltage DC-AC conversion. This paper focuses on a new dual reference modulation technique for a hybrid multilevel inverter employing Silicon carbide (SiC switches for fuel cell applications. The proposed modulation technique employs two reference waveforms and a single inverted sine wave as the carrier waveform. This technique is compared with the conventional dual carrier waveform in terms of output voltage spectral quality and switching losses. An experimental five-level hybrid inverter test rig has been built using SiC switches to implement the proposed algorithm. Gating signals are generated using PIC microcontroller. The performance of the inverter has been analyzed and compared with the result obtained from theory and simulation. Simulation study of Proportional Integral (PI controller for the inverter employing the proposed modulation strategy has been done in MATLAB/SIMULINK. Keywords: Multilevel inverter, SiC , dual reference modulation, switching losses, PI

  4. Hardwood species classification with DWT based hybrid texture feature extraction techniques

    Indian Academy of Sciences (India)

    Arvind R Yadav; R S Anand; M L Dewal; Sangeeta Gupta

    2015-12-01

    In this work, discrete wavelet transform (DWT) based hybrid texture feature extraction techniques have been used to categorize the microscopic images of hardwood species into 75 different classes. Initially, the DWT has been employed to decompose the image up to 7 levels using Daubechies (db3) wavelet as decomposition filter. Further, first-order statistics (FOS) and four variants of local binary pattern (LBP) descriptors are used to acquire distinct features of these images at various levels. The linear support vector machine (SVM), radial basis function (RBF) kernel SVM and random forest classifiers have been employed for classification. The classification accuracy obtained with state-of-the-art and DWT based hybrid texture features using various classifiers are compared. The DWT based FOS-uniform local binary pattern (DWTFOSLBPu2) texture features at the 4th level of image decomposition have produced best classification accuracy of 97.67 ± 0.79% and 98.40 ± 064% for grayscale and RGB images, respectively, using linear SVM classifier. Reduction in feature dataset by minimal redundancy maximal relevance (mRMR) feature selection method is achieved and the best classification accuracy of 99.00 ± 0.79% and 99.20 ± 0.42% have been obtained for DWT based FOS-LBP histogram Fourier features (DWTFOSLBP-HF) technique at the 5th and 6th levels of image decomposition for grayscale and RGB images, respectively, using linear SVM classifier. The DWTFOSLBP-HF features selected with mRMR method has also established superiority amongst the DWT based hybrid texture feature extraction techniques for randomly divided database into different proportions of training and test datasets.

  5. Establishment of a Multi-color Genomic in situ Hybridization Technique to Simultaneously Discriminate the Three Interspecific Hybrid Genomes in Gossypium

    Institute of Scientific and Technical Information of China (English)

    Bing Guan; Kai Wang; Bao-Liang Zhou; Wang-Zhen Guo; Tian-Zhen Zhang

    2008-01-01

    To identify alien chromosomes in recipient progenies and to analyze genome components in polyploidy, a genomic In situ hybridization (GISH) technique that is suitable for cotton was developed using increased stringency conditions. The increased stringency conditions were a combination of the four factors in the following optimized state: 100:1 ratio of blocking DNA to probe, 60% formamide wash solution, 43 =C temperature wash and a 13 min wash. Under these specific conditions using gDNA from Gossypium sturtianurn (C1C1) as a probe, strong hybridization signals were only observed on chromosomes from the C1 genome in somatic cells of the hybrid F1 (G. hirsutum×G. sturtianum) (AtDtC1). Therefore, GISH was able to discriminate parental chromosomes in the hybrid. Further, we developed a multi-color GISH to simultaneously discriminate the three genomes of the above hybrid. The results repeatedly displayed the three genomes, At, Dt, and C1, and each set of chromosomes with a unique color, making them easy to identify. The power of the multi-color GISH was proven by analysis of the hexaploid hybrid F1 (G. hirsutum × G. australe) (AtAtDtDtG2G2). We believe that the powerful multi-color GISH technique could be applied extensively to analyze the genome component in polyploidy and to identify alien chromosomes in the recipient progenies.

  6. Direct detection of expanded trinucleotide repeats using PCR and DNA hybridization techniques

    Energy Technology Data Exchange (ETDEWEB)

    Petronis, A.; Tatuch, Y.; Klempan, T.A.; Kennedy, J.L. [Hospital for Sick Children, Toronto (Canada)] [and others

    1996-02-16

    Recently, unstable trinucleotide repeats have been shown to be the etiologic factor in seven neuropsychiatric diseases, and they may play a similar role in other genetic disorders which exhibit genetic anticipation. We have tested one polymerase chain reaction (PCR)-based and two hybridization-based methods for direct detection of unstable DNA expansion in genomic DNA. This technique employs a single primer (asymmetric) PCR using total genomic DNA as a template to efficiently screen for the presence of large trinucleotide repeat expansions. High-stringency Southern blot hybridization with a PCR-generated trinucleotide repeat probe allowed detection of the DNA fragment containing the expansion. Analysis of myotonic dystrophy patients containing different degrees of (CTG){sub n} expansion demonstrated the identification of the site of trinucleotide instability in some affected individuals without any prior information regarding genetic map location. The same probe was used for fluorescent in situ hybridization and several regions of (CTG){sub n}/(CAG){sub n} repeats in the human genome were detected, including the myotonic dystrophy locus on chromosome 19q. Although limited at present to large trinucleotide repeat expansions, these strategies can be applied to directly clone genes involved in disorders caused by large expansions of unstable DNA. 33 refs., 4 figs.

  7. Biocompatibility improvement of titanium implants by coating with hybrid materials synthesized by sol-gel technique.

    Science.gov (United States)

    Catauro, M; Bollino, F; Papale, F

    2014-12-01

    Organic-inorganic hybrid materials based on zirconia and polyethylene glycol (PEG) have been synthesized via sol-gel method in the present study. Those materials, still in the sol phase, have been used to coat a titanium grade 4 (Ti-4) substrate to improve its biological properties. Dip-coating technique has been used to obtain thin films. PEG, a biocompatible polymer, used as the organic phase, has been incorporated with different percentages in an inorganic zirconium-based matrix. Those hybrids have been characterized by Fourier transform infrared spectroscopy (FTIR) to detect interactions between the two phases. The films have been examined using SEM to detect morphological changes with PEG percentages. The potential applications of the hybrid coatings in biomedical field have been evaluated by bioactivity and cytotoxicity tests. The coated titanium was immersed in simulated body fluid (SBF) for 21 days and the hydroxyapatite deposition on its surface was subsequently evaluated, as that feature can be used as an index of bone-bonding capability. SEM equipped with energy dispersive spectrometer (EDS) was used to examine hydroxyapatite formation. NIH 3T3 mouse embryonic fibroblast cells were seeded on specimens to evaluate cells-materials interactions and cell vitality was inspected using WST-8 Assay.

  8. Production of CaCO3/hyperbranched polyglycidol hybrid films using spray-coating technique.

    Science.gov (United States)

    Malinova, Kalina; Gunesch, Manfred; Montero Pancera, Sabrina; Wengeler, Robert; Rieger, Bernhard; Volkmer, Dirk

    2012-05-15

    Biomineralizing organisms employ macromolecules and cellular processing strategies in order to produce highly complex composite materials such as nacre. Bionic approaches translating this knowledge into viable technical production schemes for a large-scale production of biomimetic hybrid materials have met with limited success so far. Investigations presented here thus focus on the production of CaCO(3)/polymer hybrid coatings that can be applied to huge surface areas via reactive spray-coating. Technical requirements for simplicity and cost efficiency include a straightforward one-pot synthesis of low molecular weight hyperbranched polyglycidols (polyethers of 2,3-epoxy-1-propanol) as a simple mimic of biological macromolecules. Polymers functionalized with phosphate monoester, sulfate or carboxylate groups provide a means of controlling CaCO(3) particle density and morphology in the final coatings. We employ reactive spray-coating techniques to generate CaCO(3)/hybrid coatings among which vaterite composites can be prepared in the presence of sulfate-containing hyperbranched polyglycidol. These coatings show high stability and remained unchanged for periods longer than 9 months. By employing carboxylate-based hyperbranched polyglycidol, it is possible to deposit vaterite-calcite composites, whereas phosphate-ester-based hyperbranched polyglycidol leads to calcite composites. Nanoindentation was used to study mechanical properties, showing that coatings thus obtained are slightly harder than pure calcite. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Hybrid OPC modeling with SEM contour technique for 10nm node process

    Science.gov (United States)

    Hitomi, Keiichiro; Halle, Scott; Miller, Marshal; Graur, Ioana; Saulnier, Nicole; Dunn, Derren; Okai, Nobuhiro; Hotta, Shoji; Yamaguchi, Atsuko; Komuro, Hitoshi; Ishimoto, Toru; Koshihara, Shunsuke; Hojo, Yutaka

    2014-03-01

    Hybrid OPC modeling is investigated using both CDs from 1D and simple 2D structures and contours extracted from complex 2D structures, which are obtained by a Critical Dimension-Scanning Electron Microscope (CD-SEM). Recent studies have addressed some of key issues needed for the implementation of contour extraction, including an edge detection algorithm consistent with conventional CD measurements, contour averaging and contour alignment. Firstly, pattern contours obtained from CD-SEM images were used to complement traditional site driven CD metrology for the calibration of OPC models for both metal and contact layers of 10 nm-node logic device, developed in Albany Nano-Tech. The accuracy of hybrid OPC model was compared with that of conventional OPC model, which was created with only CD data. Accuracy of the model, defined as total error root-mean-square (RMS), was improved by 23% with the use of hybrid OPC modeling for contact layer and 18% for metal layer, respectively. Pattern specific benefit of hybrid modeling was also examined. Resist shrink correction was applied to contours extracted from CD-SEM images in order to improve accuracy of the contours, and shrink corrected contours were used for OPC modeling. The accuracy of OPC model with shrink correction was compared with that without shrink correction, and total error RMS was decreased by 0.2nm (12%) with shrink correction technique. Variation of model accuracy among 8 modeling runs with different model calibration patterns was reduced by applying shrink correction. The shrink correction of contours can improve accuracy and stability of OPC model.

  10. SU-E-T-16: A Hybrid VMAT/IMRT Technique for the Treatment of Nasopharyngeal Carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, N; Yang, R; Wang, J [Peking University Third Hospital, Beijing, Beijing (China)

    2014-06-01

    Purpose: To investigate a Hybrid VMAT/IMRT technique which combines volumetric modulated arc therapy (VMAT) and intensity modulated radiation therapy (IMRT) for nasopharyngeal carcinoma (NPC). Methods: 2 full arcs VMAT, 9-field IMRT and Hybrid VMAT/IMRT plans were created for 10 patients with NPC. The Hybrid VMAT/IMRT technique consisted of 1 full VMAT arc and 7 IMRT fields. The dose distribution of planning target volume (PTV) and organs at risk (OARs) for Hybrid VMAT/IMRT was compared with IMRT and VMAT. The monitor units (MUs) were also evaluated. Results: The Hybrid VMAT/IMRT technique significantly improved target dose homogeneity compared with IMRT and VMAT for PTV70 and PTV54. For PTV70 and PTV60, the Hybrid VMAT/IMRT technique significantly improved target dose conformity compared with IMRT (0.62 vs 0.47; p<0.05 and 0.64 vs 0.58; p<0.05, respectively) and VMAT (0.62 vs 0.43; p<0.05 and 0.64 vs 0.6; p<0.05, respectively). The near maximum dose (D2%) of temporomandibular joint (TMJ), temporal lobe and mandible for Hybrid plans were 5.5%, 7.9% and 5.2% lower than IMRT plans (p<0.05). The mean dose of TMJ, temporal lobe, mandible and unspecified tissue for Hybrid plans were 12.8%, 11.4%, 4.2% and 4.1% lower than IMRT plans (p<0.05). The mean dose of right parotid, mandible and unspecified tissue for Hybrid plans were 3.3%, 2.4% and 3.1% lower than VMAT plans (p<0.05). The mean MUs needed for IMRT, VMAT and Hybrid plans were 2256, 507 and 1394, respectively. Conclusion: Hybrid VMAT/IMRT technique significantly improved the target dose homogeneity and conformity compared with IMRT and VMAT and reduced the dose of OARs and unspecified tissue compared with IMRT with fewer MUs. Compared with VMAT, Hybrid VMAT/IMRT technique can better protect parotid gland, mandible and unspecified tissue. Ruijie Yang was funded by the grant project: National Natural Science Foundation of China (No. 81071237). Other authors have no competing interest for this work.

  11. Apical transportation of manual NiTi instruments and a hybrid technique in severely curved simulated canals

    OpenAIRE

    Aurenaila Nascimento Gonçalves; Matheus Franco da Frota; Emilio Carlos Sponchiado Júnior; Fredson Marcio Acris de Carvalho; Lucas da Fonseca Roberti Garcia; André Augusto Franco Marques

    2015-01-01

    Aim: To evaluate the apical transportation induced by two instrumentation techniques in severely curved simulated canals. Materials and Methods: Forty simulated canals were divided into two groups (n = 20), according to the following instrumentation techniques: ProTaper Universal Manual System and a hybrid technique. The simulated canals in the ProTaper group were prepared following the technique recommended by the manufacturer: SX files in the cervical third of the root canal and S1, S2,...

  12. Enhancement in Seismic Imaging using Diffraction Studies and Hybrid Traveltime Technique for PSDM

    Science.gov (United States)

    Bashir, Y.; Ghosh, D. P.; Moussavi Alashloo, S. Y.; Sum, C. W.

    2016-07-01

    The accurate migration of seismic data is conditional on the parameters which are nominated. The effective velocity used in residual processing for migration is small compared to the original migration velocity. Considering traveltime computation is a significant part of seismic imaging algorithms. Conventional implementation of Kirchhoff migration is essential for precomputing a traveltime table from the categories involving traditional ray-tracing methods and finite difference eikonal solvers. In this paper, we examine the accuracy using, the eikonal solver and paraxial ray tracing traveltime computation in pre-stack Kirchhoff depth migration. This hybrid traveltime technique can be applied to a variety of problems related to faults, fractures, and complex region. To evaluate the relevance of this identical traveltime technique, we applied on a Marmousi data set.

  13. REVIEW OF HEART DISEASE PREDICTION SYSTEM USING DATA MINING AND HYBRID INTELLIGENT TECHNIQUES

    Directory of Open Access Journals (Sweden)

    R. Chitra

    2013-07-01

    Full Text Available The Healthcare industry generally clinical diagnosis is done mostly by doctor’s expertise and experience. Computer Aided Decision Support System plays a major role in medical field. With the growing research on heart disease predicting system, it has become important to categories the research outcomes and provides readers with an overview of the existing heart disease prediction techniques in each category. Neural Networks are one of many data mining analytical tools that can be utilized to make predictions for medical data. From the study it is observed that Hybrid Intelligent Algorithm improves the accuracy of the heart disease prediction system. The commonly used techniques for Heart Disease Prediction and their complexities are summarized in this paper.

  14. Local tetrahedron modeling of microelectronics using the finite-volume hybrid-grid technique

    Energy Technology Data Exchange (ETDEWEB)

    Riley, D.J.; Turner, C.D.

    1995-12-01

    The finite-volume hybrid-grid (FVHG) technique uses both structured and unstructured grid regions in obtaining a solution to the time-domain Maxwell`s equations. The method is based on explicit time differencing and utilizes rectilinear finite-difference time-domain (FDTD) and nonorthogonal finite-volume time-domain (FVTD). The technique directly couples structured FDTD grids with unstructured FVTD grids without the need for spatial interpolation across grid interfaces. In this paper, the FVHG method is applied to simple planar microelectronic devices. Local tetrahedron grids are used to model portions of the device under study, with the remainder of the problem space being modeled with cubical hexahedral cells. The accuracy of propagating microstrip-guided waves from a low-density hexahedron region through a high-density tetrahedron grid is investigated.

  15. Enhancement of Twins Fetal ECG Signal Extraction Based on Hybrid Blind Extraction Techniques

    Directory of Open Access Journals (Sweden)

    Ahmed Kareem Abdullah

    2017-07-01

    Full Text Available ECG machines are noninvasive system used to measure the heartbeat signal. It’s very important to monitor the fetus ECG signals during pregnancy to check the heat activity and to detect any problem early before born, therefore the monitoring of ECG signals have clinical significance and importance. For multi-fetal pregnancy case the classical filtering algorithms are not sufficient to separate the ECG signals between mother and fetal. In this paper the mixture consists of mixing from three ECG signals, the first signal is the mother ECG (M-ECG signal, second signal the Fetal-1 ECG (F1-ECG, and third signal is the Fetal-2 ECG (F2-ECG, these signals are extracted based on modified blind source extraction (BSE techniques. The proposed work based on hybridization between two BSE techniques to ensure that the extracted signals separated well. The results demonstrate that the proposed work very efficiently to extract the useful ECG signals

  16. Estimation of radon concentrations in coal mines using a hybrid technique calibration curve.

    Science.gov (United States)

    Jamil, K; Ali, S

    2001-01-01

    The results of epidemiological studies in various countries show that radon and its progeny cause carcinogenic effects on mine workers. Therefore, it becomes of paramount importance to monitor radon concentrations and consequently determine the radon dose rates in coal mines for the protection of coal miners. A new calibration curve was obtained for radon concentration estimation using hybrid techniques. A calibration curve was generated using 226Ra activity concentration measured by a HPGe detector-based gamma-ray spectrometer versus alpha-track-density rate due to radon and its progeny on CR-39 track detector. Using the slope of the experimentally determined curve in the units of Becqueral per kilogram (Bq kg-1) per unit alpha-track-density per hour (cm-2 h-1), radon concentrations (Bq m-3) were estimated using coal samples from various coal mines in two provinces of Pakistan, Punjab and Balochistan. Consequently, radon dose rates were computed in the simulated environment of the coal mines. Results of these computations may be considered with a caveat that the method developed in this paper provides only a screening method to indicate the radon dose in coal mines. It has been shown that the actual measurements of radon concentrations in the coal mines are in agreement with the estimated radon concentrations using the hybrid-technique calibration curve.

  17. Hybrid Model Testing Technique for Deep-Sea Platforms Based on Equivalent Water Depth Truncation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the so-called "passively-truncated + numerical-simulation" type of hybrid model testing technique while the truncated water depth is 160 m and the model scale λ=80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the truncated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodynamic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.

  18. Novel Hybrid Scheduling Technique for Sensor Nodes with Mixed Criticality Tasks

    Directory of Open Access Journals (Sweden)

    Mihai-Victor Micea

    2017-06-01

    Full Text Available Sensor networks become increasingly a key technology for complex control applications. Their potential use in safety- and time-critical domains has raised the need for task scheduling mechanisms specially adapted to sensor node specific requirements, often materialized in predictable jitter-less execution of tasks characterized by different criticality levels. This paper offers an efficient scheduling solution, named Hybrid Hard Real-Time Scheduling (H2RTS, which combines a static, clock driven method with a dynamic, event driven scheduling technique, in order to provide high execution predictability, while keeping a high node Central Processing Unit (CPU utilization factor. From the detailed, integrated schedulability analysis of the H2RTS, a set of sufficiency tests are introduced and demonstrated based on the processor demand and linear upper bound metrics. The performance and correct behavior of the proposed hybrid scheduling technique have been extensively evaluated and validated both on a simulator and on a sensor mote equipped with ARM7 microcontroller.

  19. Skill Assessment of An Hybrid Technique To Estimate Quantitative Precipitation Forecast For Galicia (nw Spain)

    Science.gov (United States)

    Lage, A.; Taboada, J. J.

    Precipitation is the most obvious of the weather elements in its effects on normal life. Numerical weather prediction (NWP) is generally used to produce quantitative precip- itation forecast (QPF) beyond the 1-3 h time frame. These models often fail to predict small-scale variations of rain because of spin-up problems and their coarse spatial and temporal resolution (Antolik, 2000). Moreover, there are some uncertainties about the behaviour of the NWP models in extreme situations (de Bruijn and Brandsma, 2000). Hybrid techniques, combining the benefits of NWP and statistical approaches in a flexible way, are very useful to achieve a good QPF. In this work, a new technique of QPF for Galicia (NW of Spain) is presented. This region has a percentage of rainy days per year greater than 50% with quantities that may cause floods, with human and economical damages. The technique is composed of a NWP model (ARPS) and a statistical downscaling process based on an automated classification scheme of at- mospheric circulation patterns for the Iberian Peninsula (J. Ribalaygua and R. Boren, 1995). Results show that QPF for Galicia is improved using this hybrid technique. [1] Antolik, M.S. 2000 "An Overview of the National Weather Service's centralized statistical quantitative precipitation forecasts". Journal of Hydrology, 239, pp:306- 337. [2] de Bruijn, E.I.F and T. Brandsma "Rainfall prediction for a flooding event in Ireland caused by the remnants of Hurricane Charley". Journal of Hydrology, 239, pp:148-161. [3] Ribalaygua, J. and Boren R. "Clasificación de patrones espaciales de precipitación diaria sobre la España Peninsular". Informes N 3 y 4 del Servicio de Análisis e Investigación del Clima. Instituto Nacional de Meteorología. Madrid. 53 pp.

  20. A hybrid MAS/MoM technique for 2D impedance scatterers illuminated by closely positioned sources

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav

    2005-01-01

    A hybrid technique for 2D scattering problems with impedance structures and closely positioned illuminating sources is presented. This technique combines the method of auxiliary sources (MAS) with a localized method of moments (MoM) region near the source. Significant improvements over standard MAS...

  1. WRHT: A Hybrid Technique for Detection of Wormhole Attack in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rupinder Singh

    2016-01-01

    Full Text Available Wormhole attack is a challenging security threat to wireless sensor networks which results in disrupting most of the routing protocols as this attack can be triggered in different modes. In this paper, WRHT, a wormhole resistant hybrid technique, is proposed, which can detect the presence of wormhole attack in a more optimistic manner than earlier techniques. WRHT is based on the concept of watchdog and Delphi schemes and ensures that the wormhole will not be left untreated in the sensor network. WRHT makes use of the dual wormhole detection mechanism of calculating probability factor time delay probability and packet loss probability of the established path in order to find the value of wormhole presence probability. The nodes in the path are given different ranking and subsequently colors according to their behavior. The most striking feature of WRHT consists of its capacity to defend against almost all categories of wormhole attacks without depending on any required additional hardware such as global positioning system, timing information or synchronized clocks, and traditional cryptographic schemes demanding high computational needs. The experimental results clearly indicate that the proposed technique has significant improvement over the existing wormhole attack detection techniques.

  2. Hybrid Clustering-GWO-NARX neural network technique in predicting stock price

    Science.gov (United States)

    Das, Debashish; Safa Sadiq, Ali; Mirjalili, Seyedali; Noraziah, A.

    2017-09-01

    Prediction of stock price is one of the most challenging tasks due to nonlinear nature of the stock data. Though numerous attempts have been made to predict the stock price by applying various techniques, yet the predicted price is not always accurate and even the error rate is high to some extent. Consequently, this paper endeavours to determine an efficient stock prediction strategy by implementing a combinatorial method of Grey Wolf Optimizer (GWO), Clustering and Non Linear Autoregressive Exogenous (NARX) Technique. The study uses stock data from prominent stock market i.e. New York Stock Exchange (NYSE), NASDAQ and emerging stock market i.e. Malaysian Stock Market (Bursa Malaysia), Dhaka Stock Exchange (DSE). It applies K-means clustering algorithm to determine the most promising cluster, then MGWO is used to determine the classification rate and finally the stock price is predicted by applying NARX neural network algorithm. The prediction performance gained through experimentation is compared and assessed to guide the investors in making investment decision. The result through this technique is indeed promising as it has shown almost precise prediction and improved error rate. We have applied the hybrid Clustering-GWO-NARX neural network technique in predicting stock price. We intend to work with the effect of various factors in stock price movement and selection of parameters. We will further investigate the influence of company news either positive or negative in stock price movement. We would be also interested to predict the Stock indices.

  3. Improved Framework for Breast Cancer Detection using Hybrid Feature Extraction Technique and FFNN

    Directory of Open Access Journals (Sweden)

    Ibrahim Mohamed Jaber Alamin

    2016-10-01

    Full Text Available Breast Cancer early detection using terminologies of image processing is suffered from the less accuracy performance in different automated medical tools. To improve the accuracy, still there are many research studies going on different phases such as segmentation, feature extraction, detection, and classification. The proposed framework is consisting of four main steps such as image preprocessing, image segmentation, feature extraction and finally classification. This paper presenting the hybrid and automated image processing based framework for breast cancer detection. For image preprocessing, both Laplacian and average filtering approach is used for smoothing and noise reduction if any. These operations are performed on 256 x 256 sized gray scale image. Output of preprocessing phase is used at efficient segmentation phase. Algorithm is separately designed for preprocessing step with goal of improving the accuracy. Segmentation method contributed for segmentation is nothing but the improved version of region growing technique. Thus breast image segmentation is done by using proposed modified region growing technique. The modified region growing technique overcoming the limitations of orientation as well as intensity. The next step we proposed is feature extraction, for this framework we have proposed to use combination of different types of features such as texture features, gradient features, 2D-DWT features with higher order statistics (HOS. Such hybrid feature set helps to improve the detection accuracy. For last phase, we proposed to use efficient feed forward neural network (FFNN. The comparative study between existing 2D-DWT feature extraction and proposed HOS-2D-DWT based feature extraction methods is proposed.

  4. Potentials of Optical Damage Assessment Techniques in Automotive Crash-Concepts composed of FRP-Steel Hybrid Material Systems

    Science.gov (United States)

    Dlugosch, M.; Spiegelhalter, B.; Soot, T.; Lukaszewicz, D.; Fritsch, J.; Hiermaier, S.

    2017-05-01

    With car manufacturers simultaneously facing increasing passive safety and efficiency requirements, FRP-metal hybrid material systems are one way to design lightweight and crashworthy vehicle structures. Generic automotive hybrid structural concepts have been tested under crash loading conditions. In order to assess the state of overall damage and structural integrity, and primarily to validate simulation data, several NDT techniques have been assessed regarding their potential to detect common damage mechanisms in such hybrid systems. Significant potentials were found particularly in combining 3D-topography laser scanning and X-Ray imaging results. Ultrasonic testing proved to be limited by the signal coupling quality on damaged or curved surfaces.

  5. Hydrophobicity control by a supercritical drying technique in a sol–gel process with hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Hongbo; Qiao, Zemin; Liu, Xiao; Cui, Xudong, E-mail: xudcui@gmail.com

    2015-10-15

    Highlights: • Sol–gel route is combined with polymerization without using modifier. • Supercritical drying control is the key to obtain super-hydrophobic surfaces. • The whole fabrication is technologically controllable and with low costs. • The production rate is higher than 90%. • The method provides a cost-effective way for industry applications. - Abstract: We successfully synthesized one type of cheap super-hydrophobic hybrid porous materials in a sol–gel process. In this route, hydrophilic polymers and TEOS-base sol are used as precursors, the ultraviolet ray-initiated polymerization and supercritical fluid drying techniques are combined together to fulfill this task. All fabricated samples exhibit lotus-leaf-like surface structures with super-hydrophobicity. The underlying mechanisms are carefully investigated using a field-emission scanning electron microscopy (FESEM) and an X-ray photoelectron spectroscopy (XPS). We found that a well-controlled drying process is crucial to the formation of such super-hydrophobic surfaces. As high as 90% production rate is obtained in our route and thus, it might provide a cost-effective way to produce super-hydrophobic hybrid materials for industry applications.

  6. Adaptation of Hybrid FSO/RF Communication System Using Puncturing Technique

    Directory of Open Access Journals (Sweden)

    M. N. Khan

    2016-12-01

    Full Text Available Spectrum of radio frequency (RF communications is limited and expensive to install new applications. Free space optical (FSO communication is a viable technology which offers enormous bandwidth, license free installation, inexpensive deployment and error prone links. The FSO links degrade significantly due to the varying atmospheric and weather conditions (fog, cloud, snow, haze and combination of these. We propose a hybrid FSO/RF communication system which adapts the varying nature of atmosphere and weather. For the adaption of varying atmosphere and weather scenarios, we develop a novel optimization algorithm. The proposed algorithm is based on the well-known puncturing technique. We provide an extrinsic information transfer (EXIT chart for the binary and quaternary mapping scheme for the proposed communication system. We simulate the proposed algorithm for the hybrid communication system and analyze the system performance. The proposed algorithm is computationally less expensive and provide better performance gains over varying atmosphere and weather conditions. The algorithm is suitable for fast speed applications.

  7. A millisecond micro-RNA separation technique by a hybrid structure of nanopillars and nanoslits.

    Science.gov (United States)

    Wu, Qiong; Kaji, Noritada; Yasui, Takao; Rahong, Sakon; Yanagida, Takeshi; Kanai, Masaki; Nagashima, Kazuki; Tokeshi, Manabu; Kawai, Tomoji; Baba, Yoshinobu

    2017-03-08

    A millisecond micro-RNA separation of a mixture of total RNA and genomic DNA, extracted from cultured HeLa cells, was successfully achieved using a hybrid structure of nanopillars and nanoslits contained inside a microchannel. The nanopillars, 250-nm in diameter and 100-nm in height, were fabricated with a 750-nm space inside the nanoslits, which were 100-nm in height and 25-μm in width; the nanopillars were then applied as a new sieve matrix. This ultra-fast technique for the separation of miRNA can be an effective pretreatment for semiconductor nanopore DNA sequencing, which has an optimum reading speed of 1 base/ms to obtain effective signal-to-noise ratio and discriminate each base by ion or tunneling current during the passage of nucleic acids.

  8. Modified Genetic Algorithm for DNA Sequence Assembly by Shotgun and Hybridization Sequencing Techniques

    Directory of Open Access Journals (Sweden)

    Prof.Narayan Kumar Sahu

    2012-09-01

    Full Text Available Since the advent of rapid DNA sequencing methods in 1976, scientists have had the problem of inferring DNA sequences from sequenced fragments. Shotgun sequencing is a well-established biological and computational method used in practice. Many conventional algorithms for shotgun sequencing are based on the notion of pair wise fragment overlap. While shotgun sequencing infers a DNA sequence given the sequences of overlapping fragments, a recent and complementary method, called sequencing by hybridization (SBH, infers a DNA sequence given the set of oligomers that represents all sub words of some fixed length, k. In this paper, we propose a new computer algorithm for DNA sequence assembly that combines in a novel way the techniques of both shotgun and SBH methods. Based on our preliminary investigations, the algorithm promises- to be very fast and practical for DNA sequence assembly [1].

  9. Dual Fixation of Calcaneal Tuberosity Avulsion with Concomitant Achilles Tendon Rupture: A Novel Hybrid Technique

    Directory of Open Access Journals (Sweden)

    Gautham Prabhakar

    2017-01-01

    Full Text Available Fracture of the calcaneal tuberosity with a concomitant Achilles tendon rupture presents a difficult challenge for the treating surgeon. The ultimate goal of treatment is to restore function of both the gastrocnemius-soleus complex and the Achilles tendon. This particular subset of fractures occurs often in diabetics and elderly patients with osteoporosis making fixation of the displaced fragment rather complex. If the Achilles tendon disruption is only discovered later once the fracture is healed, subsequent management is difficult with surgical treatment being more morbid. While this is a rare injury, the consequences of a missed chronic Achilles tendon disruption are severe with significant dysfunction. It is therefore important to have a high index of suspicion for concomitant injury and to be prepared for dual fixation. We present a novel hybrid surgical fixation technique, which may be used in this instance.

  10. Estimation of radon concentrations in coal mines using a hybrid technique calibration curve

    Energy Technology Data Exchange (ETDEWEB)

    Jamil, K.; Ali, S. [PINSTECH, Islamabad (Pakistan). Radiation Physics Division, Environmental Radiation Group

    2001-07-01

    A calibration curve was generated using Ra-226 activity concentration measured by a HPGe detector-based gamma-ray spectrometer versus alpha-track-density rate due to radon and its progeny on CR-39 track detector. Using the slops of the experimentally determined curve in the units of Becquerel per kilogram (Bq kg{sup -1}) per unit alpha -track-density per hour (cm{sup -2}h{sup -1}), radon concentrations (Bq m{sup -3}) were estimated using coal samples from various coal mines in two provinces of Pakistan, Punjab and Balochistan. Consequently, radon dose rates were computed in the simulated environment of the coal mines. These results provide only a screening method to indicate the radon dose in coal mines, It was shown that the actual measurements of radon concentrations in the coal mines are in agreement with the estimated radon concentrations using the hybrid-technique calibration curve.

  11. A millisecond micro-RNA separation technique by a hybrid structure of nanopillars and nanoslits

    Science.gov (United States)

    Wu, Qiong; Kaji, Noritada; Yasui, Takao; Rahong, Sakon; Yanagida, Takeshi; Kanai, Masaki; Nagashima, Kazuki; Tokeshi, Manabu; Kawai, Tomoji; Baba, Yoshinobu

    2017-01-01

    A millisecond micro-RNA separation of a mixture of total RNA and genomic DNA, extracted from cultured HeLa cells, was successfully achieved using a hybrid structure of nanopillars and nanoslits contained inside a microchannel. The nanopillars, 250-nm in diameter and 100-nm in height, were fabricated with a 750-nm space inside the nanoslits, which were 100-nm in height and 25-μm in width; the nanopillars were then applied as a new sieve matrix. This ultra-fast technique for the separation of miRNA can be an effective pretreatment for semiconductor nanopore DNA sequencing, which has an optimum reading speed of 1 base/ms to obtain effective signal-to-noise ratio and discriminate each base by ion or tunneling current during the passage of nucleic acids. PMID:28272420

  12. Development of a fluorescent in situ hybridization (FISH) technique for visualizing CGMMV in plant tissues.

    Science.gov (United States)

    Shargil, D; Zemach, H; Belausov, E; Lachman, O; Kamenetsky, R; Dombrovsky, A

    2015-10-01

    Cucumber green mottle mosaic virus (CGMMV), which belongs to the genus Tobamovirus, is a major pathogen of cucurbit crops grown indoors and in open fields. Currently, immunology (e.g., ELISA) and molecular amplification techniques (e.g., RT-PCR) are employed extensively for virus detection in plant tissues and commercial seed lots diagnostics. In this study, a fluorescent in situ hybridization (FISH) technique, using oligonucleotides whose 5'-terminals were labeled with red cyanine 3 (Cy3) or green fluorescein isothiocyanate (FITC), was developed for the visualization of the pathogen in situ. This simple and reliable method allows detection and localization of CGMMV in the vegetative and reproductive tissues of cucumber and melon. When this technique was applied in male flowers, anther tissues were found to be infected; whereas the pollen grains were found to be virus-free. These results have meaningful epidemiological implications for the management of CGMMV, particularly with regard to virus transfer via seed and the role of insects as CGMMV vectors.

  13. A hybrid technique for private location-based queries with database protection

    KAUST Repository

    Ghinita, Gabriel

    2009-01-01

    Mobile devices with global positioning capabilities allow users to retrieve points of interest (POI) in their proximity. To protect user privacy, it is important not to disclose exact user coordinates to un-trusted entities that provide location-based services. Currently, there are two main approaches to protect the location privacy of users: (i) hiding locations inside cloaking regions (CRs) and (ii) encrypting location data using private information retrieval (PIR) protocols. Previous work focused on finding good trade-offs between privacy and performance of user protection techniques, but disregarded the important issue of protecting the POI dataset D. For instance, location cloaking requires large-sized CRs, leading to excessive disclosure of POIs (O(|D|) in the worst case). PIR, on the other hand, reduces this bound to , but at the expense of high processing and communication overhead. We propose a hybrid, two-step approach to private location-based queries, which provides protection for both the users and the database. In the first step, user locations are generalized to coarse-grained CRs which provide strong privacy. Next, a PIR protocol is applied with respect to the obtained query CR. To protect excessive disclosure of POI locations, we devise a cryptographic protocol that privately evaluates whether a point is enclosed inside a rectangular region. We also introduce an algorithm to efficiently support PIR on dynamic POI sub-sets. Our method discloses O(1) POI, orders of magnitude fewer than CR- or PIR-based techniques. Experimental results show that the hybrid approach is scalable in practice, and clearly outperforms the pure-PIR approach in terms of computational and communication overhead. © 2009 Springer Berlin Heidelberg.

  14. An Alternate Vista in Rehabilitation of Cranial Defects: Combining Digital and Manual Techniques to Fabricate a Hybrid Cranioplast.

    Science.gov (United States)

    Kaur, Harsimran; Nanda, Aditi; Koli, Dheeraj; Verma, Mahesh; Singh, Hukum; Bishnoi, Ishu; Pathak, Pooja; Gupta, Ankur

    2015-06-01

    The desired features of a cranioplast include providing an acceptable contour, continuity with the remaining skull (marginal adaptation), improvising the aesthetic outcome, providing a strengthened prosthesis to avoid fracture in case of repeat trauma, and protecting the remaining neurological structures. Combining digital and manual techniques to fabricate a hybrid polymethylmethacrylate cranioplast during the rehabilitation of a pediatric patient with cranial defect has been described. Utilization of digital techniques (rapid prototyping to obtain skull analog) and manual (hand) sculpting of the prosthesis strengthened with glass fiber enabled the authors to fabricate a hybrid cranioplast. Satisfactory outcome was achieved.

  15. A novel fluorescent in situ hybridization technique for detection of Rickettsia spp. in archival samples

    DEFF Research Database (Denmark)

    Svendsen, Claus Bo; Boye, Mette; Struve, Carsten

    2009-01-01

    A novel, sensitive and specific method for detecting Rickettsia spp. in archival samples is described. The method involves the use of fluorescently marked oligonucleotide probes for in situ hybridization. Specific hybridization of Ricekttsia was found without problems of cross-reactions with bact......A novel, sensitive and specific method for detecting Rickettsia spp. in archival samples is described. The method involves the use of fluorescently marked oligonucleotide probes for in situ hybridization. Specific hybridization of Ricekttsia was found without problems of cross...

  16. Organic Scintillators in Nonproliferation Applications With a Hybridized Double-Pulse Rejection Technique

    Science.gov (United States)

    Bourne, Mark Mitchell

    Alternative detection technologies are crucial to meeting demand for neutron detectors, for the current production of He-3, which has been the classical neutron choice, is insufficient. Organic scintillators are a strong candidate as a He-3 alternative due to their high efficiency, fast timing properties, and capabilities for separately identifying gamma-rays and neutrons through pulse shape discrimination (PSD). However, the use of organic scintillators in environments with numerous gamma rays can be limited because overlapping gamma-ray events can be misclassified as neutron events during PSD. To solve this problem, a new, hybridized double-pulse cleaning technique, consisting of three separate cleaning algorithms, was developed. The technique removes gamma-ray double pulses while preserving as many neutron pulses as possible. This technique was applied to separate experiments of Cf-252 and a gamma-ray source when measuring at a 100-kHz count rate and a field of 1000 incident gamma rays per incident neutron. It was found that stilbene scintillators were capable of intrinsic neutron efficiencies between 15-19% when measuring bare Cf-252 and 13-17% when exposed to the gamma-ray field. Misclassification rates ranged from 10-6-10-5, a factor-of-5 better than both the EJ-309 liquid and BB3-5 plastic. Next, plutonium experiments were performed with stilbene to determine which cleaning algorithm was best for each sample. A clear correlation was found that related the correct method of cleaning to the measured gamma ray-to-neutron ratio. When the measured gamma ray-to-neutron ratio is 10 or below, the template cleaning algorithm is preferred, while the fractional and hybrid cleaning algorithms are preferred when the gamma ray-to-neutron ratio is 100 or greater. Discriminating neutron sources such as Cf-252 or AmLi from SNM samples such as plutonium is a top priority in nonproliferation. We demonstrate that time-correlated experiments, utilizing both PSD-capable plastic

  17. A Discrete Wavelet Based Feature Extraction and Hybrid Classification Technique for Microarray Data Analysis

    Directory of Open Access Journals (Sweden)

    Jaison Bennet

    2014-01-01

    Full Text Available Cancer classification by doctors and radiologists was based on morphological and clinical features and had limited diagnostic ability in olden days. The recent arrival of DNA microarray technology has led to the concurrent monitoring of thousands of gene expressions in a single chip which stimulates the progress in cancer classification. In this paper, we have proposed a hybrid approach for microarray data classification based on nearest neighbor (KNN, naive Bayes, and support vector machine (SVM. Feature selection prior to classification plays a vital role and a feature selection technique which combines discrete wavelet transform (DWT and moving window technique (MWT is used. The performance of the proposed method is compared with the conventional classifiers like support vector machine, nearest neighbor, and naive Bayes. Experiments have been conducted on both real and benchmark datasets and the results indicate that the ensemble approach produces higher classification accuracy than conventional classifiers. This paper serves as an automated system for the classification of cancer and can be applied by doctors in real cases which serve as a boon to the medical community. This work further reduces the misclassification of cancers which is highly not allowed in cancer detection.

  18. A Polar Fuzzy Control Scheme for Hybrid Power System Using Vehicle-To-Grid Technique

    Directory of Open Access Journals (Sweden)

    Mohammed Elsayed Lotfy

    2017-07-01

    Full Text Available A novel polar fuzzy (PF control approach for a hybrid power system is proposed in this research. The proposed control scheme remedies the issues of system frequency and the continuity of demand supply caused by renewable sources’ uncertainties. The hybrid power system consists of a wind turbine generator (WTG, solar photovoltaics (PV, a solar thermal power generator (STPG, a diesel engine generator (DEG, an aqua-electrolyzer (AE, an ultra-capacitor (UC, a fuel-cell (FC, and a flywheel (FW. Furthermore, due to the high cost of the battery energy storage system (BESS, a new idea of vehicle-to-grid (V2G control is applied to use the battery of the electric vehicle (EV as equivalent to large-scale energy storage units instead of small batteries to improve the frequency stability of the system. In addition, EV customers’ convenience is taken into account. A minimal-order observer is used to estimate the supply error. Then, the area control error (ACE signal is calculated in terms of the estimated supply error and the frequency deviation. ACE is considered in the frequency domain. Two PF approaches are utilized in the intended system. The mission of each controller is to mitigate one frequency component of ACE. The responsibility for ACE compensation is shared among all parts of the system according to their speed of response. The performance of the proposed control scheme is compared to the conventional fuzzy logic control (FLC. The effectiveness and robustness of the proposed control technique are verified by numerical simulations under various scenarios.

  19. Diagnostic accuracy: theoretical models for preimplantation genetic testing of a single nucleus using the fluorescence in situ hybridization technique

    NARCIS (Netherlands)

    P.N. Scriven; P.M.M. Bossuyt

    2010-01-01

    The aim of this study was to develop and use theoretical models to investigate the accuracy of the fluorescence in situ hybridization (FISH) technique in testing a single nucleus from a preimplantation embryo without the complicating effect of mosaicism. Mathematical models were constructed for thre

  20. Silica/polyacrylonitrile hybrid nanofiber membrane separators via sol-gel and electrospinning techniques for lithium-ion batteries

    Science.gov (United States)

    Yanilmaz, Meltem; Lu, Yao; Zhu, Jiadeng; Zhang, Xiangwu

    2016-05-01

    Silica/polyacrylonitrile (SiO2/PAN) hybrid nanofiber membranes were fabricated by using sol-gel and electrospinning techniques and their electrochemical performance was evaluated for use as separators in lithium-ion batteries. The aim of this study was to design high-performance separator membranes with enhanced electrochemical performance and good thermal stability compared to microporous polyolefin membranes. In this study, SiO2 nanoparticle content up to 27 wt% was achieved in the membranes by using sol-gel technique. It was found that SiO2/PAN hybrid nanofiber membranes had superior electrochemical performance with good thermal stability due to their high SiO2 content and large porosity. Compared with commercial microporous polyolefin membranes, SiO2/PAN hybrid nanofiber membranes had larger liquid electrolyte uptake, higher electrochemical oxidation limit, and lower interfacial resistance with lithium. SiO2/PAN hybrid nanofiber membranes with different SiO2 contents (0, 16, 19 and 27 wt%) were also assembled into lithium/lithium iron phosphate cells, and high cell capacities and good cycling performance were demonstrated at room temperature. In addition, cells using SiO2/PAN hybrid nanofiber membranes with high SiO2 contents showed superior C-rate performance compared to those with low SiO2 contents and commercial microporous polyolefin membrane.

  1. A novel hybrid meta-heuristic technique applied to the well-known benchmark optimization problems

    Science.gov (United States)

    Abtahi, Amir-Reza; Bijari, Afsane

    2016-09-01

    In this paper, a hybrid meta-heuristic algorithm, based on imperialistic competition algorithm (ICA), harmony search (HS), and simulated annealing (SA) is presented. The body of the proposed hybrid algorithm is based on ICA. The proposed hybrid algorithm inherits the advantages of the process of harmony creation in HS algorithm to improve the exploitation phase of the ICA algorithm. In addition, the proposed hybrid algorithm uses SA to make a balance between exploration and exploitation phases. The proposed hybrid algorithm is compared with several meta-heuristic methods, including genetic algorithm (GA), HS, and ICA on several well-known benchmark instances. The comprehensive experiments and statistical analysis on standard benchmark functions certify the superiority of the proposed method over the other algorithms. The efficacy of the proposed hybrid algorithm is promising and can be used in several real-life engineering and management problems.

  2. A novel hybrid meta-heuristic technique applied to the well-known benchmark optimization problems

    Science.gov (United States)

    Abtahi, Amir-Reza; Bijari, Afsane

    2017-09-01

    In this paper, a hybrid meta-heuristic algorithm, based on imperialistic competition algorithm (ICA), harmony search (HS), and simulated annealing (SA) is presented. The body of the proposed hybrid algorithm is based on ICA. The proposed hybrid algorithm inherits the advantages of the process of harmony creation in HS algorithm to improve the exploitation phase of the ICA algorithm. In addition, the proposed hybrid algorithm uses SA to make a balance between exploration and exploitation phases. The proposed hybrid algorithm is compared with several meta-heuristic methods, including genetic algorithm (GA), HS, and ICA on several well-known benchmark instances. The comprehensive experiments and statistical analysis on standard benchmark functions certify the superiority of the proposed method over the other algorithms. The efficacy of the proposed hybrid algorithm is promising and can be used in several real-life engineering and management problems.

  3. A hybrid PSO technique for procuring VAR ancillary service in the deregulated electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    El-Araby, E.E. [Department of Electrical Engineering, Suez Canal University (Egypt); Yorino, Naoto [Department of Artificial Complex Systems Engineering, Hiroshima University (Japan)

    2010-07-15

    This paper develops a new market-based technique for acquiring VAR ancillary service in the electricity market. The main objective of the developed market is to enable transmission operator ''TO'' to procure VAR service in a long term contract from the critical VAR providers that satisfy minimum VAR service payment while maintaining system security. Reactive power control problem for voltage stability is introduced into the VAR market problem in an explicit manner for normal and emergency states. An integration of particle swarm optimization ''PSO'' is presented with successive linear programming ''SLP'' for dealing with the VAR ancillary service problem. The problem is formulated as a large-scale nonlinear constrained optimization problem with a non-differentiable objective function representing VAR payment and operational costs. This type of problem is hard to be treated straightforwardly by the classical optimization methods. Therefore, we propose here a two-layer hybrid PSO/SLP approach, which is suited for carrying out the difficulties associated with non-differentiable and discontinuous objective functions. The proposed method has been examined on the standard IEEE 57 bus-system and compared with GA/SLP method to demonstrate its capability. (author)

  4. Optimization of RF power absorption by optimization techniques using the lower hybrid current drive of FTU

    Energy Technology Data Exchange (ETDEWEB)

    Centioli, C. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Iannone, F. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Mazza, G. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Panella, M. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Pangione, L. [Dipartimento di Informatica, Sistemi e Produzione, Universita di Roma, Tor Vergata, Via del Politecnico 1, 00133 Rome (Italy)]. E-mail: pangione@frascati.enea.it; Podda, S. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Tuccillo, A. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Vitale, V. [Associazione Euratom/ENEA Sulla Fusione, Centro Ricerche Frascati, Via E. Fermi 45, CP 65, 00044 Frascati, Rome (Italy); Zaccarian, L. [Dipartimento di Informatica, Sistemi e Produzione, Universita di Roma, Tor Vergata, Via del Politecnico 1, 00133 Rome (Italy)

    2005-11-15

    In this paper, we will report on the experimental results arising from the implementation of optimization techniques to maximize the RF power coupling versus the plasma conditions in the FTU experimental facility. These experiments are carried out by employing the open-source Linux-RTAI control system currently running on the FTU digital feedback loop. The RF power source under consideration is a lower hybrid system (LH) based on six gyrotrons with a nominal power output capability of 1.1 MW each. The optimization of the coupling level between the plasma and the emitting antenna reduces the reflected power, thus maximizing the heating effects in addition to avoiding danger to the emitter (equivalently, annoying safety shutdowns of the system). To this aim, the plasma displacement is modified by suitably adjusting the reference input to the stabilizing feedback, according to a steepest descent algorithm. It will be shown in the paper how this algorithm achieves a satisfactory level of robustness with respect to measurement errors and well performs both in simulation and in experimental tests, thus leading to an improved effectiveness of the RF heating system.

  5. Hybrid LS-LMMSE Channel Estimation Technique for LTE Downlink Systems

    CERN Document Server

    Khlifi, Abdelhakim; 10.5121/ijngn.2011.3401

    2012-01-01

    In this paper, we propose to improve the performance of the channel estimation for LTE Downlink systems under the effect of the channel length. As LTE Downlink system is a MIMO-OFDMA based system, a cyclic prefix (CP) is inserted at the beginning of each transmitted OFDM symbol in order to mitigate both inter-carrier interference (ICI) and inter-symbol interference (ISI). The inserted CP is usually equal to or longer than the channel length. However, the cyclic prefix can be shorter because of some unforeseen channel behaviour. Previous works have shown that in the case where the cyclic prefix is equal to or longer than the channel length, LMMSE performs better than LSE but at the cost of computational complexity .In the other case, LMMSE performs also better than LS only for low SNR values. However, LS shows better performance for LTE Downlink systems for high SNR values. Therefore, we propose a hybrid LS-LMMSE channel estimation technique robust to the channel length effect. MATLAB Monte-Carlo simulations a...

  6. Power Management Based Current Control Technique for Photovoltaic-Battery Assisted Wind-Hydro Hybrid System

    Science.gov (United States)

    Ram Prabhakar, J.; Ragavan, K.

    2013-07-01

    This article proposes new power management based current control strategy for integrated wind-solar-hydro system equipped with battery storage mechanism. In this control technique, an indirect estimation of load current is done, through energy balance model, DC-link voltage control and droop control. This system features simpler energy management strategy and necessitates few power electronic converters, thereby minimizing the cost of the system. The generation-demand (G-D) management diagram is formulated based on the stochastic weather conditions and demand, which would likely moderate the gap between both. The features of management strategy deploying energy balance model include (1) regulating DC-link voltage within specified tolerances, (2) isolated operation without relying on external electric power transmission network, (3) indirect current control of hydro turbine driven induction generator and (4) seamless transition between grid-connected and off-grid operation modes. Furthermore, structuring of the hybrid system with appropriate selection of control variables enables power sharing among each energy conversion systems and battery storage mechanism. By addressing these intricacies, it is viable to regulate the frequency and voltage of the remote network at load end. The performance of the proposed composite scheme is demonstrated through time-domain simulation in MATLAB/Simulink environment.

  7. Performance improvement of hybrid subcarrier multiplexing optical spectrum code division multiplexing system using spectral direct decoding detection technique

    Science.gov (United States)

    Sahbudin, R. K. Z.; Abdullah, M. K.; Mokhtar, M.

    2009-06-01

    This paper proposes a hybrid subcarrier multiplexing/optical spectrum code division multiplexing (SCM/OSCDM) system for the purpose of combining the advantages of both techniques. Optical spectrum code division multiple-access (OSCDMA) is one of the multiplexing techniques that is becoming popular because of the flexibility in the allocation of channels, ability to operate asynchronously, enhanced privacy and increased capacity in bursty nature networks. On the other hand, subcarrier multiplexing (SCM) technique is able to enhance the channel data rate of OSCDMA systems. In this paper, a newly developed detection technique for the OSCDM called spectral direct decoding (SDD) detection technique is compared mathematically with the AND subtraction detection technique. The system utilizes a new unified code construction named KS (Khazani-Syed) code. The results characterizing the bit-error-rate (BER) show that SDD offers a significant improved performance at BER of 10 -9.

  8. A hybrid conformal planning technique with solitary dynamic portal for postmastectomy radiotherapy with regional nodes

    Directory of Open Access Journals (Sweden)

    K Mohamathu Rafic

    2017-01-01

    Full Text Available Purpose: This study focuses on incorporation of a solitary dynamic portal (SDP in conformal planning for postmastectomy radiotherapy (PMRT with nodal regions with an intention to overcome the treatment planning limitations imposed by conventional techniques. Materials and Methods: Twenty-four patients who underwent surgical mastectomy followed by PMRT were included in this study. Initially, a treatment plan comprising tangential beams fitted to beam's-eye-view (BEV of chest wall (CW and a direct anterior field fitted to BEV of nodal region, both sharing a single isocenter was generated using Eclipse treatment planning system. Multiple field-in-fields with optimum beam weights (5% per field were added primarily from the medial tangent, fitted to BEV of entire target volume, and finally converted into a dynamic portal. Dosimetric analysis for the treatment plans and fluence verification for the dynamic portals were performed. Results and Discussion: Conformal plans with SDP showed excellent dose coverage (V95%>95%, higher degree of tumor dose conformity (≤1.25 and homogeneity (≤0.12 without compromising the organ at risk sparing for PMRT with nodal region. Treatment plans with SDP considerably reduced the lower isodose spread to the ipsilateral lung, heart, and healthy tissue without affecting the dose homogeneity. Further, gamma evaluation showed more than 96% pixel pass rate for standard 3%/3 mm dose difference and distance-to-agreement criteria. Moreover, this plan offers less probability of “geometrical miss” at the highly irregular CW with regional nodal radiotherapy. Conclusion: Hybrid conformal plans with SDP would facilitate improved dose distribution and reduced uncertainty in delivery and promises to be a suitable treatment option for complex postmastectomy CW with regional nodal irradiation.

  9. Passive hybrid technique for the vibration mitigation of systems of interconnected stays

    Science.gov (United States)

    Caracoglia, Luca; Jones, Nicholas P.

    2007-11-01

    The problem of stay oscillation mitigation in cable-stayed bridges, usually induced by wind or wind and rain, may require the introduction of passive devices, such as dampers on individual stays or the use of transverse restrainers (cross-ties). The damper performance is often affected by the geometrical constraints of the bridge deck that limit the installation of such devices to locations very close to the end of the cable. On the other hand, cross-ties are generally incapable of direct energy dissipation. Therefore, the authors have proposed and analyzed a hybrid passive system in which the advantages of both techniques are applied to the oscillation mitigation of complex interconnected systems with multiple external dampers at the deck level, in correspondence with the cross-tie lines. This paper summarizes the relevant findings of a research program involving the authors' efforts focused on the in-plane free-vibration analysis of stay-cable systems. This research is also based upon some recent results associated with the analytical solution of a taut-cable with two attached viscous dampers. These findings are initially extended to a simplified network with reduced number of connectors and one damper, for which the derivation of analytical solution is still possible. Subsequently, an existing multistay multidamped arrangement on a real bridge is considered, in which a fully numerical approach is required. The modal behavior is compared to the simplified examples, also enabling the interpretation of the results in the context of more general guidelines for potential future application.

  10. Prediction of monthly regional groundwater levels through hybrid soft-computing techniques

    Science.gov (United States)

    Chang, Fi-John; Chang, Li-Chiu; Huang, Chien-Wei; Kao, I.-Feng

    2016-10-01

    Groundwater systems are intrinsically heterogeneous with dynamic temporal-spatial patterns, which cause great difficulty in quantifying their complex processes, while reliable predictions of regional groundwater levels are commonly needed for managing water resources to ensure proper service of water demands within a region. In this study, we proposed a novel and flexible soft-computing technique that could effectively extract the complex high-dimensional input-output patterns of basin-wide groundwater-aquifer systems in an adaptive manner. The soft-computing models combined the Self Organized Map (SOM) and the Nonlinear Autoregressive with Exogenous Inputs (NARX) network for predicting monthly regional groundwater levels based on hydrologic forcing data. The SOM could effectively classify the temporal-spatial patterns of regional groundwater levels, the NARX could accurately predict the mean of regional groundwater levels for adjusting the selected SOM, the Kriging was used to interpolate the predictions of the adjusted SOM into finer grids of locations, and consequently the prediction of a monthly regional groundwater level map could be obtained. The Zhuoshui River basin in Taiwan was the study case, and its monthly data sets collected from 203 groundwater stations, 32 rainfall stations and 6 flow stations during 2000 and 2013 were used for modelling purpose. The results demonstrated that the hybrid SOM-NARX model could reliably and suitably predict monthly basin-wide groundwater levels with high correlations (R2 > 0.9 in both training and testing cases). The proposed methodology presents a milestone in modelling regional environmental issues and offers an insightful and promising way to predict monthly basin-wide groundwater levels, which is beneficial to authorities for sustainable water resources management.

  11. A review of the hybrid techniques for the fabrication of hard magnetic microactuators based on bonded magnetic powders

    Science.gov (United States)

    Pallapa, M.; Yeow, J. T. W.

    2015-02-01

    Polymer composites based on permanent magnetic bonded powders exhibit immense potential for applications in microactuators and sensors with magnetic performances comparable to their fully dense counterparts. While fabrication and integration of magnetic devices based on bonded magnetic powders is challenging via conventional deposition and electrochemical growth techniques, hybrid fabrication offers a promising alternative. This paper presents the evolution of permanent magnetic materials into bonded magnetic powders, the magnetic performance figures of merit of permanent magnetic materials significant for the design and manufacture of polymer based sensors and actuators. A review of the hybrid fabrication techniques such as replica molding, squeegee coating, spin casting etc are reported. Critical factors affecting the fabrication of polymer magnetic composites such as filler particle size and effect of magnetic field during fabrication are discussed. Prior art based on polymer magnetic composites for the fabrication of hard magnetic films and hard magnetic actuators are presented.

  12. Mixed potential integral equation technique for hybrid microstrip-slotline multilayered circuits using a mixed rectangular-triangular mesh

    Science.gov (United States)

    Sercu, Jeannick; Fache, Niels; Libbrecht, Frank; Lagasse, Paul

    1995-05-01

    In this paper, a mixed potential integral equation (MPIE) formulation for hybrid microstrip-slotline multilayered circuits is presented. This integral equation is solved with the method of moments (MoM) in combination with Galerkin's method. The vector-valued rooftop functions defined over a mixed rectangular-triangular mesh are used to model the electric and magnetic currents on the microstrip and slotline structures. An efficient calculation technique for the quadruple interaction integrals between two cells in the system matrix equation is presented. Two examples of hybrid microstrip-slotline circuits are discussed. The first example compares the simulation results for a microstrip-slotline transition with measured data. The second example illustrates the use of the simulation technique in the design process of a broadband slot-coupled microstrip line transition.

  13. A 3D hybrid grid generation technique and a multigrid/parallel algorithm based on anisotropic agglomeration approach

    Institute of Scientific and Technical Information of China (English)

    Zhang Laiping; Zhao Zhong; Chang Xinghua; He Xin

    2013-01-01

    A hybrid grid generation technique and a multigrid/parallel algorithm are presented in this paper for turbulence flow simulations over three-dimensional (3D) complex geometries.The hybrid grid generation technique is based on an agglomeration method of anisotropic tetrahedrons.Firstly,the complex computational domain is covered by pure tetrahedral grids,in which anisotropic tetrahedrons are adopted to discrete the boundary layer and isotropic tetrahedrons in the outer field.Then,the anisotropic tetrahedrons in the boundary layer are agglomerated to generate prismatic grids.The agglomeration method can improve the grid quality in boundary layer and reduce the grid quantity to enhance the numerical accuracy and efficiency.In order to accelerate the convergence history,a multigrid/parallel algorithm is developed also based on anisotropic agglomeration approach.The numerical results demonstrate the excellent accelerating capability of this multigrid method.

  14. Staging of recurrent and advanced lung cancer with 18F-FDG PET in a coincidence technique (hybrid PET).

    Science.gov (United States)

    Schmid, R A; Hautmann, H; Poellinger, B; Kellner, W; Moisseev, A; Brinkbaeumer, K; Weiss, M; Hahn, K; Dresel, S

    2003-01-01

    The aim of this study was to evaluate [18F]fluorodeoxyglucose ( F-FDG) imaging of recurrent or inoperable lung cancer using a hybrid positron emission tomography (PET) device of the third generation. Examinations were compared with the results of conventional staging. Thirty-six patients suffering from recurrent or primarily inoperable lung cancer (29 men, seven women; age 64.8+/-12.0 years) were examined using hybrid PET (Marconi Axis gamma-PET ) 60 min after injection of 370 MBq F-FDG. The data obtained were reconstructed iteratively. All patients received a computed tomography (CT) scan using either the spiral or multislice technique. All lesions suspicious for primary or recurrent tumour were verified by biopsy; mediastinal lymph nodes were considered as malignant, when positive histology or a small axis diameter of greater than 1 cm measured with CT in addition to progression of clinical course was found. Distant metastases were diagnosed by CT and bone scintigraphy. Using hybrid PET all lesions showed a focally elevated glucose metabolism. Lymph node involvement of the ipsilateral peribronchial and hilar station (N1) was identified in 24/26 cases (92%), in 26/29 cases (90%) of ipsilateral central manifestation (N2) and in 11/13 (85%) cases of central contralateral or supraclavicular lymphatic infestation (N3). Pulmonary spread in hybrid PET was found in 4/8 cases (50%), whereas mainly lung metastases with a diameter of 1.5 cm and smaller were missed. Pleural involvement diagnosed by CT was verified in 4/5 patients. All four patients with bony metastases in conventional staging also presented with positive findings in hybrid PET (8/9 lesions). Concordance with conventional staging was found in 28/36 of patients (78%). In 4/36 patients (11%) unknown sites of tumour were detected leading to therapeutic consequences in three patients after radiological confirmation. Hybrid PET would have led to an understaging in four cases (11%), resulting theoretically in

  15. Ecophysiological Analysis of Microorganisms in Complex Microbial Systems by Combination of Fluorescence In Situ Hybridization with Extracellular Staining Techniques

    Science.gov (United States)

    Nielsen, Jeppe Lund; Kragelund, Caroline; Nielsen, Per Halkjær

    Ecophysiological analysis and functions of single cells in complex microbial systems can be examined by simple combinations of Fluorescence in situ hybridization (FISH) for identification with various staining techniques targeting functional phenotypes. In this chapter, we describe methods and protocols optimized for the study of extracellular enzymes, surface hydrophobicity and specific surface structures. Although primarily applied to the study of microbes in wastewater treatment (activated sludge and biofilms), the methods may also be used with minor modifications in several other ecosystems.

  16. POWER OPTIMIZED DATAPATH UNITS OF HYBRID EMBEDDED CORE ARCHITECTURE USING CLOCK GATING TECHNIQUE

    National Research Council Canada - National Science Library

    T.Subhashini; M.Kamaraju

    2015-01-01

    ...% of the total power dissipation. The main goal of this work is to implement a prototype power optimized datapath unit and ALU of Hybrid Embedded Controller Architecture targeted on to the FPGA chip and analyze the power consumption...

  17. RAPD Technique Used to Determine the Purity of Hybrid Hot Pepper Seeds

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Two hybrid hot pepper varieties Xiangyan 5 and Xiangyan 10, and their parents were analyzed the polymerase chain reaction with MJ /PT 200 Peltrier Themal Cycler and DS 800 White-ultravilot Transilluminator to set up a RAPD system adaptable to the purity determination of the hybrid seeds. Among the 39 random primers, 2 and 4 primers were found to be used effectively in Xiangyan 5 and Xiangyan 10 respectively.

  18. Optimisation Sizing of Hybrid Wind-Diesel Systems using Linear Programming Technique

    OpenAIRE

    Gan, Leong Kit; Shek, Jonathan; Mueller, Markus

    2014-01-01

    Despite the great potential of hybrid wind-diesel system in supplying energy to remote or island communities, sizing the system components have been a challenging problem for many project managers due to the reliance on various factors. This work considers utilising a fixed speed wind turbine (induction generator) in the hybrid system. It requires energy for start-up operation and this work takes into account for sizing the battery storage. In addition, the trade-off between the number of bat...

  19. PET/MRI: a novel hybrid imaging technique. Major clinical indications and preliminary experience in Brazil.

    Science.gov (United States)

    Vitor, Taise; Martins, Karine Minaif; Ionescu, Tudor Mihai; Cunha, Marcelo Livorsi da; Baroni, Ronaldo Hueb; Garcia, Marcio Ricardo Taveira; Wagner, Jairo; Campos, Guilherme de Carvalho; Nogueira, Solange Amorim; Guerra, Elaine Gonçalves; Amaro, Edson

    2017-01-01

    In recent years, medical imaging with hybrid techniques has widely accepted and employed in clinical routine. PET/MRI offers significant advantages, including excellent contrast and resolution and reduced ionizing radiation, as compared to well-established PET/CT. Therefore, PET/MRI is a promising modality for oncologic imaging of some regions, such as brain, head and neck, liver and pelvis. This article set out to analyze clinical conditions that could benefit from PET/MRI imaging based on our caseload. The potential of PET/MRI to become the imaging modality of choice for assessment of neurologic and oncologic conditions associated with soft tissues is highlighted. Clinical aspects of PET/MRI and its application to clinical cases are illustrated with examples extracted from the authors' preliminary experience. RESUMO Nos últimos anos, imagens médicas com tecnologias híbridas tornaram-se amplamente aceitas e utilizadas na prática clínica. O PET/RM possui vantagens importantes, incluindo excelentes contrastes e resolução, e menor radiação ionizante, em comparação ao PET/TC. Por isto, é uma modalidade promissora para exames de imagem de pacientes oncológicos, para avaliar o cérebro, cabeça e pescoço, o fígado e a pelve. O objetivo deste artigo foi analisar as situações clínicas que se beneficiariam de exames de PET/RM a partir de uma casuística. Destacamos o potencial desta técnica se tornar o método de imagem de escolha para doenças neurológicas e oncológicas que envolvam partes moles. Os aspectos clínicos de PET/RM e sua aplicação aos casos clínicos são ilustrados com exemplos da experiência inicial dos autores.

  20. Novel fabrication technique of hybrid structure lens array for 3D images

    Science.gov (United States)

    Lee, Junsik; Kim, Junoh; Kim, Cheoljoong; Shin, Dooseub; Koo, Gyohyun; Won, Yong Hyub

    2016-03-01

    Tunable liquid lens arrays can produce three dimensional images by using electrowetting principle that alters surface tensions by applying voltage. This method has advantages of fast response time and low power consumption. However, it is challenging to fabricate a high fill factor liquid lens array and operate three dimensional images which demand high diopter. This study describes a hybrid structure lens array which has not only a liquid lens array but a solid lens array. A concave-shape lens array is unavoidable when using only the liquid lens array and some voltages are needed to make the lens flat. By placing the solid lens array on the liquid lens array, initial diopter can be positive. To fabricate the hybrid structure lens array, a conventional lithographic process in semiconductor manufacturing is needed. A negative photoresist SU-8 was used as chamber master molds. PDMS and UV adhesive replica molding are done sequentially. Two immiscible liquids, DI water and dodecane, are injected in the fabricated chamber, followed by sealing. The fabricated structure has a 20 by 20 pattern of cylindrical shaped circle array and the aperture size of each lens is 1mm. The thickness of the overall hybrid structure is about 2.8mm. Hybrid structure lens array has many advantages. Solid lens array has almost 100% fill factor and allow high efficiency. Diopter can be increased by more than 200 and negative diopter can be shifted to the positive region. This experiment showed several properties of the hybrid structure and demonstrated its superiority.

  1. SPATIALLY RESOLVED M-BAND EMISSION FROM IO’S LOKI PATERA–FIZEAU IMAGING AT THE 22.8 m LBT

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, Albert; Veillet, Christian [LBT Observatory, University of Arizona, 933 N. Cherry Ave., Tucson, AZ 85721 (United States); Kleer, Katherine de; Pater, Imke de [University of California at Berkeley, Berkeley, CA 94720 (United States); Leisenring, Jarron; Defrère, Denis; Hinz, Philip; Skemer, Andy [University of Arizona, 1428 E. University Blvd., Tucson, AZ 85721 (United States); Camera, Andrea La; Bertero, Mario; Boccacci, Patrizia [DIBRIS, University of Genoa, Via Dodecaneso 35, I-16146 Genova (Italy); Arcidiacono, Carmelo [INAF-Osservatorio Astronomico di Bologna, via Ranzani 1, I-40127 Bologna (Italy); Hofmann, Karl-Heinz; Schertl, Dieter; Weigelt, Gerd [Max Planck Institute for Radio Astronomy, Auf dem Hügel 69, D-53121 Bonn (Germany); Kürster, Martin [Max Planck Institute for Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Rathbun, Julie [Planetary Science Institute, 1700 E. Fort Lowell, Tucson, AZ 85719 (United States); Skrutskie, Michael [University of Virginia, 530 McCormick Road, Charlottesville, VA 22904 (United States); Spencer, John [Southwest Research Institute, 1050 Walnut Ste. Suite 300, Boulder, CO 80302 (United States); Woodward, Charles E., E-mail: aconrad@lbto.org [Minnesota Institute for Astrophysics, 116 Church St., Minneapolis, MN 55455 (United States)

    2015-05-15

    The Large Binocular Telescope Interferometer mid-infrared camera, LMIRcam, imaged Io on the night of 2013 December 24 UT and detected strong M-band (4.8 μm) thermal emission arising from Loki Patera. The 22.8 m baseline of the Large Binocular Telescope provides an angular resolution of ∼32 mas (∼100 km at Io) resolving the Loki Patera emission into two distinct maxima originating from different regions within Loki’s horseshoe lava lake. This observation is consistent with the presence of a high-temperature source observed in previous studies combined with an independent peak arising from cooling crust from recent resurfacing. The deconvolved images also reveal 15 other emission sites on the visible hemisphere of Io including two previously unidentified hot spots.

  2. HybridSPE: A novel technique to reduce phospholipid-based matrix effect in LC-ESI-MS Bioanalysis.

    Science.gov (United States)

    Ahmad, Shafeeque; Kalra, Harsh; Gupta, Amit; Raut, Bharat; Hussain, Arshad; Rahman, Md Akhlaquer

    2012-10-01

    When complex biological materials are analyzed without an adequate sample preparation technique, MS signal and response undergo significant alteration and result in poor quantification and assay. This problem generally takes place due to the presence of several endogenous materials component in samples. One of the major causes of ion suppression in bioanalysis is the presence of phospholipids during LC-MS analysis. The phospholipid-based matrix effect was investigated with a commercially available electro spray ionization (ESI) source coupled with a triple quadrupole mass spectrometer. HybridSPE dramatically reduced the levels of residual phospholipids in biological samples, leading to significant reduction in matrix effects. This new procedure that combines the simplicity of precipitation with the selectivity of SPE allows obtaining much cleaner extracts than with conventional procedures. HybridSPE-precipitation procedure provides significant improvement in bioanalysis and a practical and fast way to ensure the avoidance of phospholipids-based matrix effects. The present review outlines the HybridSPE technique to minimize phospholipids-based matrix effects on LC-ESI-MS bioanalysis.

  3. HybridSPE: A novel technique to reduce phospholipid-based matrix effect in LC-ESI-MS Bioanalysis

    Directory of Open Access Journals (Sweden)

    Shafeeque Ahmad

    2012-01-01

    Full Text Available When complex biological materials are analyzed without an adequate sample preparation technique, MS signal and response undergo significant alteration and result in poor quantification and assay. This problem generally takes place due to the presence of several endogenous materials component in samples. One of the major causes of ion suppression in bioanalysis is the presence of phospholipids during LC-MS analysis. The phospholipid-based matrix effect was investigated with a commercially available electro spray ionization (ESI source coupled with a triple quadrupole mass spectrometer. HybridSPE dramatically reduced the levels of residual phospholipids in biological samples, leading to significant reduction in matrix effects. This new procedure that combines the simplicity of precipitation with the selectivity of SPE allows obtaining much cleaner extracts than with conventional procedures. HybridSPE-precipitation procedure provides significant improvement in bioanalysis and a practical and fast way to ensure the avoidance of phospholipids-based matrix effects. The present review outlines the HybridSPE technique to minimize phospholipids-based matrix effects on LC-ESI-MS bioanalysis.

  4. Effects of the P2 M-band flux asymmetry of laser-driven gold Hohlraums on the implosion of ICF ignition capsule

    Science.gov (United States)

    Li, Yongsheng; Gu, Jianfa; Wu, Changshu; Song, Peng; Dai, Zhensheng; Li, Shuanggui; Li, Xin; Kang, Dongguo; Gu, Peijun; Zheng, Wudi; Zou, Shiyang; Ding, Yongkun; Lan, Ke; Ye, Wenhua; Zhang, Weiyan

    2016-07-01

    Low-mode asymmetries in the laser-indirect-drive inertial confinement fusion implosion experiments conducted on the National Ignition Facility [G. H. Miller et al., Nucl. Fusion 44, S228 (2004)] are deemed the main obstacles hindering further improvement of the nuclear performance of deuterium-tritium-layered capsules. The dominant seeds of these asymmetries include the P2 and P4 asymmetries of x-ray drives and P2 asymmetry introduced by the supporting "tent." Here, we explore the effects of another possible seed that can lead to low-mode asymmetric implosions, i.e., the M-band flux asymmetry (MFA) in laser-driven cylindrical gold Hohlraums. It is shown that the M-band flux facilitates the ablation and acceleration of the shell, and that positive P2 MFAs can result in negative P2 asymmetries of hot spots and positive P2 asymmetries of shell's ρR. An oblate or toroidal hot spot, depending on the P2 amplitude of MFA, forms at stagnation. The energy loss of such a hot spot via electron thermal conduction is seriously aggravated not only due to the enlarged hot spot surface but also due to the vortices that develop and help transferring thermal energy from the hotter center to the colder margin of such a hot spot. The cliffs of nuclear performance for the two methodologies of applying MFA (i.e., symmetric flux in the presence of MFA and MFA added for symmetric soft x-ray flux) are obtained locating at 9.5% and 5.0% of P2/P0 amplitudes, respectively.

  5. Hybrid approach to AAA: bilateral "banana" technique to preserve hypogastric artery in complex anatomy aorto-biiliac aneurysm.

    Science.gov (United States)

    Mosquera Arochena, N; Molina Herrero, F; Carbalho Fernandez, C; Rodriguez Feijoo, G; Fernandez Lebrato, R; Barrios Castro, A; Garcia Fernandez, I

    2011-01-01

    The surgical approach for hypogastric preservation in aorto-iliac aneurysm (AAA) open repair (OR) has been described and performed with different techniques but all of them represent a higher mortality and potencial complications to the procedure; this is even more critical in bilateral disease. Since the introduction of the first endograft, a continuous development has occurred, such as the stent graft with specific branch designed for preserving antegrade flow in the hypogastric artery. On highly angulated and tortuous iliac anatomies, the use of Sandwich-Graft technique, as described by Armando Lobato, represents a valid alternative to iliac branch. The hybrid approach could be a good treatment option in young patients with AAA affecting hypogastric arteries. We present the technical description and a case report of bilateral "banana" technique perfor- med with flexible covered stent (Viabahn(®) WL Gore) to preserve both hypogastric arteries combined with open repair in a 52 years old patient. Technical report and Results: A bilateral retrograde endograft was implanted from both external ilac arteries to hypo- gastric artery excluding bilateral common iliac aneurysms followed by an open repair to the AAA (aneurismectomy + aorto bifemoral by-pass) with good inmediate and short-midterm follow up (12 months) This hybrid technique could be a good approach to hypogastric preservation in low risk and young patients reducing potencial complications of hypogastric artery oclusion.

  6. N-doped ZnO films grown from hybrid target by the pulsed laser deposition technique

    Science.gov (United States)

    Martín-Tovar, E. A.; Chan y Díaz, E.; Acosta, M.; Castro-Rodríguez, R.; Iribarren, A.

    2016-10-01

    ZnO thin films were grown by the pulsed laser deposition technique on glass substrate using a hybrid target composed of ZnO powder embedded into a poly(ethyl cyanoacrylate) matrix. The resulting thin film presented ZnO wurtzite structure with very low stress and diffractogram very similar to that of the powder pattern. From comparing with ZnO thin films grown from traditional sintered target, it is suggested that the use of this hybrid target with a soft matrix led to ejection of ZnO clusters that conveniently disposed and adhered to substrate and previous deposited layers. Chemical measurements showed the presence of Zn-N bonds, besides Zn-O ones. Optical absorption profile confirmed the presence of low-polymerized zinc oxynitride molecular subunits, besides ZnO.

  7. Dielectric property determination of hybrid Al2O3-filled MWCNT buckypaper by the rectangular cavity perturbation technique

    Science.gov (United States)

    Miao, Hsin-Yuan; Liu, Jih-Hsin; Saravanan, L.; Tsao, Che-Wei; Pan, Jui-Wen

    2015-04-01

    This study investigated the complex dielectric permittivity of freestanding multiwalled carbon nanotube buckypaper (MWCNT-BP) and a synthesized hybrid alumina-filled buckypaper (Al2O3-BP) composite with different alumina loadings (5-30 wt%). The non-destructive microwave transmission technique for complex permittivity determination involving cavity perturbation was employed to characterize a set of Al2O3-BP sheets. This was done by filling a rectangular cavity resonator with a standard dielectric Teflon sample and then performing permittivity measurements for the buckypaper (BP) samples in the X-band frequency range (7-12 GHz). Field-emission scanning electron microscopy (FESEM) was used to analyze the morphology of the MWCNT-BP and the alumina-loaded BP composites. DC electrical resistivity measurements clearly demonstrated conductor-insulator transition. The effect of alumina loadings on the dielectric properties of the synthesized hybrid Al2O3-BP sheet is discussed.

  8. Hybrid models for hydrological forecasting: integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following top

  9. A hybrid method for flood simulation in small catchments combining hydrodynamic and hydrological techniques

    Science.gov (United States)

    Bellos, Vasilis; Tsakiris, George

    2016-09-01

    The study presents a new hybrid method for the simulation of flood events in small catchments. It combines a physically-based two-dimensional hydrodynamic model and the hydrological unit hydrograph theory. Unit hydrographs are derived using the FLOW-R2D model which is based on the full form of two-dimensional Shallow Water Equations, solved by a modified McCormack numerical scheme. The method is tested at a small catchment in a suburb of Athens-Greece for a storm event which occurred in February 2013. The catchment is divided into three friction zones and unit hydrographs of 15 and 30 min are produced. The infiltration process is simulated by the empirical Kostiakov equation and the Green-Ampt model. The results from the implementation of the proposed hybrid method are compared with recorded data at the hydrometric station at the outlet of the catchment and the results derived from the fully hydrodynamic model FLOW-R2D. It is concluded that for the case studied, the proposed hybrid method produces results close to those of the fully hydrodynamic simulation at substantially shorter computational time. This finding, if further verified in a variety of case studies, can be useful in devising effective hybrid tools for the two-dimensional flood simulations, which are lead to accurate and considerably faster results than those achieved by the fully hydrodynamic simulations.

  10. Hybrid models for hydrological forecasting: Integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following top

  11. Role of hybrid forecasting techniques for transportation planning of broiler meat under uncertain demand in thailand

    Directory of Open Access Journals (Sweden)

    Thoranin Sujjaviriyasup

    2014-12-01

    Full Text Available One of numerous problems experiencing in supply chain management is the demand. Most demands are appeared in terms of uncertainty. The broiler meat industry is inevitably encountering the same problem. In this research, hybrid forecasting model of ARIMA and Support Vector Machine (SVMs are developed to forecast broiler meat export. In addition, ARIMA, SVMs, and Moving Average (MA are chosen for comparing the forecasting efficiency. All the forecasting models are tested and validated using the data of Brazil’s export, Canada’s export, and Thailand’s export. The hybrid model provides accuracy of the forecasted values that are 98.71%, 97.50%, and 93.01%, respectively. In addition, the hybrid model presents the least error of all MAE, RMSE, and MAPE comparing with other forecasting models. As forecasted data are applied to transportation planning, the mean absolute percentage error (MAPE of optimal value of forecasted value and actual value is 14.53%. The hybrid forecasting model shows an ability to reduce risk of total cost of transportation when broiler meat export is forecasted by using MA(2, MA(3, ARIMA, and SVM are 50.59%, 60.18%, 68.01%, and 46.55%, respectively. The results indicate that the developed forecasting model is recommended to broiler meat industries’ supply chain decision.

  12. Hybrid and Model-Based Iterative Reconstruction Techniques for Pediatric CT

    NARCIS (Netherlands)

    den Harder, Annemarie M.; Willemink, Martin J.; Budde, Ricardo P. J.; Schilham, Arnold M. R.; Leiner, Tim; de Jong, Pim A.

    2015-01-01

    OBJECTIVE. Radiation exposure from CT examinations should be reduced to a minimum in children. Iterative reconstruction (IR) is a method to reduce image noise that can be used to improve CT image quality, thereby allowing radiation dose reduction. This article reviews the use of hybrid and model-bas

  13. Hybrid models for hydrological forecasting: integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following

  14. Hybrid models for hydrological forecasting: Integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following

  15. Biological evaluation of zirconia/PEG hybrid materials synthesized via sol-gel technique.

    Science.gov (United States)

    Catauro, M; Papale, F; Bollino, F; Gallicchio, M; Pacifico, S

    2014-07-01

    The objective of the following study has been the synthesis via sol-gel and the characterization of novel organic-inorganic hybrid materials to be used in biomedical field. The prepared materials consist of an inorganic zirconia matrix containing as organic component the polyethylene glycol (PEG), a water-soluble polymer used in medical and pharmaceutical fields. Various hybrids have been synthesized changing the molar ratio between the organic and inorganic parts. Fourier transform spectroscopy suggests that the structure of the interpenetrating network is realized by hydrogen bonds between the Zr-OH group in the sol-gel intermediate species and both the terminal alcoholic group and ethereal oxygen atoms in the repeating units of polymer The amorphous nature of the gels has been ascertained by X-ray diffraction analysis. The morphology observation has been carried out by using the Scanning Electron Microscope and has confirmed that the obtained materials are nanostructurated hybrids. The bioactivity of the synthesized system has been shown by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating the human blood plasma. The potential biocompatibility of hybrids has been assessed as performing indirect MTT cytotoxicity assay towards 3T3 cell line at 24, 48, and 72 h exposure times. Copyright © 2014. Published by Elsevier B.V.

  16. Rapid high-throughput genotyping of HBV DNA using a modified hybridization-extension technique.

    Science.gov (United States)

    Bao, Han; Zhao, Wenliang; Ruan, Banjun; Wang, Qing; Zhao, Jinrong; Lei, Xiaoying; Wang, Weihua; Liu, Yonglan; Sun, Jianbing; Xiang, An; Guo, Yanhai; Yan, Zhen

    2013-11-07

    China has the highest incidence of hepatitis B virus (HBV) infection worldwide. HBV genotypes have variable impacts on disease pathogenesis and drug tolerance. We have developed a technically simple and accurate method for HBV genotyping that will be applicable to pre-treatment diagnosis and individualized treatment. Multiple sequence alignments of HBV genomes from GenBank were used to design primers and probes for genotyping of HBV A through H. The hybridization was carried out on nitrocellulose (NC) membranes with probes fixed in an array format, which was followed by hybrid amplification by an extension step with DNA polymerase to reinforce the double-stranded DNA hybrids on the NC membrane and subsequent visualization using an avidin-biotin system. Genotyping results were confirmed by DNA sequencing and bioinformatics analysis using the National Center for Biotechnology Information genotyping database, and compared with results from the line probe assay. The data show that multiple sequence alignment defined a 630 bp region in the HBV PreS and S regions that was suitable for genotyping. All genotyping significant single nucleotides in the region were defined. Two-hundred-and-ninety-one HBV-positive serum samples from Northwest Chinese patients were genotyped, and the genotyping rate from the new modified hybridization-extension method was 100% compared with direct sequencing. Compared with line probe assay, the newly developed method is superior, featuring reduced reaction time, lower risk of contamination, and increased accuracy for detecting single nucleotide mutation. In conclusion, a novel hybridization-extension method for HBV genotyping was established, which represents a new tool for accurate and rapid SNP detection that will benefit clinical testing.

  17. Energy Spectrum of Ultra-High Energy Cosmic Rays Observed with the Telescope Array Using a Hybrid Technique

    CERN Document Server

    Abu-Zayyad, T; Allen, M; Anderson, R; Azuma, R; Barcikowski, E; Belz, J W; Bergman, D R; Blake, S A; Cady, R; Cheon, B G; Chiba, J; Chikawa, M; Cho, E J; Cho, W R; Fujii, H; Fujii, T; Fukuda, T; Fukushima, M; Hanlon, W; Hayashi, K; Hayashi, Y; Hayashida, N; Hibino, K; Hiyama, K; Honda, K; Iguchi, T; Ikeda, D; Ikuta, K; Inoue, N; Ishii, T; Ishimori, R; Ito, H; Ivanov, D; Iwamoto, S; Jui, C C H; Kadota, K; Kakimoto, F; Kalashev, O; Kanbe, T; Kasahara, K; Kawai, H; Kawakami, S; Kawana, S; Kido, E; Kim, H B; Kim, H K; Kim, J H; Kitamoto, K; Kitamura, S; Kitamura, Y; Kobayashi, K; Kobayashi, Y; Kondo, Y; Kuramoto, K; Kuzmin, V; Kwon, Y J; Lan, J; Lim, S I; Lundquist, J P; Machida, S; Martens, K; Matsuda, T; Matsuura, T; Matsuyama, T; Matthews, J N; Minamino, M; Miyata, K; Murano, Y; Myers, I; Nagasawa, K; Nagataki, S; Nakamura, T; Nam, S W; Nonaka, T; Ogio, S; Ohnishi, M; Ohoka, H; Oki, K; Oku, D; Okuda, T; Ono, M; Oshima, A; Ozawa, S; Park, I H; Pshirkov, M S; Rodriguez, D C; Roh, S Y; Rubtsov, G; Ryu, D; Sagawa, H; Sakurai, N; Sampson, A L; Scott, L M; Shah, P D; Shibata, F; Shibata, T; Shimodaira, H; Shin, B K; Shin, J I; Shirahama, T; Smith, J D; Sokolsky, P; Springer, R W; Stokes, B T; Stratton, S R; Stroman, T; Suzuki, S; Takahashi, Y; Takeda, M; Taketa, A; Takita, M; Tameda, Y; Tanaka, H; Tanaka, K; Tanaka, M; Thomas, S B; Thomson, G B; Tinyakov, P; Tkachev, I; Tokuno, H; Tomida, T; Troitsky, S; Tsunesada, Y; Tsutsumi, K; Tsuyuguchi, Y; Uchihori, Y; Udo, S; Ukai, H; Urban, F; Vasiloff, G; Wada, Y; Wong, T; Yamakawa, Y; Yamane, R; Yamaoka, H; Yamazaki, K; Yang, J; Yoneda, Y; Yoshida, S; Yoshii, H; Zhou, X; Zollinger, R; Zundel, Z

    2013-01-01

    We measure the spectrum of cosmic rays with energies greater than $10^{18.2}$ eV with the Fluorescence Detectors (FDs) and the Surface Detectors (SDs) of the Telescope Array Experiment using the data taken in our first 2.3-year observation from May 27 2008 to September 7 2010. A hybrid air shower reconstruction technique is employed to improve accuracies in determination of arrival directions and primary energies of cosmic rays using both FD and SD data. The energy spectrum presented here is in agreement with our previously published spectra and the HiRes results.

  18. ADAPTING HYBRID MACHINE TRANSLATION TECHNIQUES FOR CROSS-LANGUAGE TEXT RETRIEVAL SYSTEM

    Directory of Open Access Journals (Sweden)

    P. ISWARYA

    2017-03-01

    Full Text Available This research work aims in developing Tamil to English Cross - language text retrieval system using hybrid machine translation approach. The hybrid machine translation system is a combination of rule based and statistical based approaches. In an existing word by word translation system there are lot of issues and some of them are ambiguity, Out-of-Vocabulary words, word inflections, and improper sentence structure. To handle these issues, proposed architecture is designed in such a way that, it contains Improved Part-of-Speech tagger, machine learning based morphological analyser, collocation based word sense disambiguation procedure, semantic dictionary, and tense markers with gerund ending rules, and two pass transliteration algorithm. From the experimental results it is clear that the proposed Tamil Query based translation system achieves significantly better translation quality over existing system, and reaches 95.88% of monolingual performance.

  19. Application of hybrid microwave thermal extraction techniques for mulberry root bark

    OpenAIRE

    Wang Cheng-Chi; Yau Her-Terng

    2013-01-01

    The main focus of this paper is the extraction of compounds from the mulberry root bark using a hybrid microwave thermal process. The shearing mechanism and an integrated circulation system, which increases the rate of contact between the solvent and extractive, are studied. The results are analyzed by the Taguchi method and verified by high performance liquid chromatography. Furthermore, the optimal operating parameters of the extraction of mulberry root b...

  20. Development and Application of Nucleic Acid Hybridization Techniques to Arbovirus Surveillance and Diagnosis.

    Science.gov (United States)

    1986-11-04

    The pVV9 and pWV7 probes were more specific for dengue-2 RNA, but-o ::e cross reaction with other dengue serotypes was noted. ,PdUc1biLity Codes S...contained dengue specific inserts that strongly hybridized to dengue-2 RMA and to the RNA of other dengue serotypes to varying degrees (Figure 6). The pVVl

  1. FPGA Techniques Based New Hybrid Modulation Strategies for Voltage Source Inverters

    OpenAIRE

    Sudha, L. U.; J. Baskaran; Elankurisil, S. A.

    2015-01-01

    This paper corroborates three different hybrid modulation strategies suitable for single-phase voltage source inverter. The proposed method is formulated using fundamental switching and carrier based pulse width modulation methods. The main tale of this proposed method is to optimize a specific performance criterion, such as minimization of the total harmonic distortion (THD), lower order harmonics, switching losses, and heat losses. The proposed method is articulated using fundamental switch...

  2. Application of DNA hybridization techniques in the assessment of diarrheal disease among refugess in Thailand. [Shigella; Escherichia coli; Campylobacter; Cryptosporidium

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, D.N.; Echeverria, P.; Pitarangsi, C.; Seriwatana, J.; Sethabutr, O.; Bodhidatta, L.; Brown, C.; Herrmann, J.E.; Blacklow, N.R.

    1988-01-01

    The epidemiology and etiology of acute diarrheal disease were determined in a Hmong refugee camp on the Thai-Laotian border from April 11 to May 14, 1985. DNA hybridization techniques were used to detect Shigella species, enteroinvasive Escherichia coli, and enterotoxigenic E. coli. A monoclonal enzyme-linked immunosorbent assay was used to detect rotavirus, and standard microbiology was used to detect other enteropathogens. The age-specific diarrheal disease rates were 47 episodes per month per 1000 children less than five years old and 113 episodes per month per 1000 children less than one year old. Rotavirus, enterotoxigenic E. coli, Campylobacter, and Cryptosporidium were the predominant pathogens in children less than two years old. The DNA probe hybridized with 94% of 31 specimens identified as enterotoxigenic E. coli by the standard assays and with none of the specimens in which the standard assays were negative. The probe for Shigella and enteroinvasive E. coli hybridized in eight of 10 stools that contained Shigella and four of 314 stools from which Shigella and enteroinvasive E. coli were not isolated. The use of DNA probes allows specimens to be collected in remote areas with a minimum amount of equipment and technical expertise so that they can be easily transported to a central laboratory for further processing.

  3. Screening of FOXP3-interacted proteins by yeast two-hybrid technique

    Institute of Scientific and Technical Information of China (English)

    Zhou Lina; Wu Jun; Luo Gaoxing; He Weifeng; Chen Xiwei; Bo Ganping; Yuan Shunzong; Zhang Xiaorong; Hu Xiaohong

    2008-01-01

    Objective: To screen the proteins interacting with the Treg specification factor forkhead box protein P3 (FOXP3) by yeast two-hybrid system. Methods: Human FOXP3 gene was amplified by nest RT-PCR from peripheral blood mononuclear cells (PBMC) and inserted into plasmid pGBKT7 to construct the bait vector, then the self-activation and toxicity of the bait vector in host yeast strain AH109 were observed. Thereafter, a human liver cDNA library was screened by the bait vector. The positive clones were selected out by nutrient-deficient culture and back-hybridizing. The sequences from the candidate positive clones were blasted and analyzed by bioinformatics methods. Results: The constructed bait vector encoding FOXP3 was found no self-activation and toxicity in yeast AH109. Three proteins which interacted with FOXP3, including tumor protein D52, splicing factor 3b subunit 1 and hypothetical protein, were identified. Conclusion: Three new candidate proteins interacting with FOXP3 are selected out by this yeast two-hybrid system and library, which may facilitate the further study of FOXP3 in Treg.

  4. Collision avoidance for a mobile robot based on radial basis function hybrid force control technique

    Institute of Scientific and Technical Information of China (English)

    Wen Shu-Huan

    2009-01-01

    Collision avoidance is always difficult in the planning path for a mobile robot. In this paper, the virtual force field between a mobile robot and an obstacle is formed and regulated to maintain a desired distance by hybrid force control algorithm. Since uncertainties from robot dynamics and obstacle degrade the performance of a collision avoidance task, intelligent control is used to compensate for the uncertainties. A radial basis function (RBF) neural network is used to regulate the force field of an accurate distance between a robot and an obstacle in this paper and then simulation studies are conducted to confirm that the proposed algorithm is effective.

  5. GENERAL: Collision avoidance for a mobile robot based on radial basis function hybrid force control technique

    Science.gov (United States)

    Wen, Shu-Huan

    2009-10-01

    Collision avoidance is always difficult in the planning path for a mobile robot. In this paper, the virtual force field between a mobile robot and an obstacle is formed and regulated to maintain a desired distance by hybrid force control algorithm. Since uncertainties from robot dynamics and obstacle degrade the performance of a collision avoidance task, intelligent control is used to compensate for the uncertainties. A radial basis function (RBF) neural network is used to regulate the force field of an accurate distance between a robot and an obstacle in this paper and then simulation studies are conducted to confirm that the proposed algorithm is effective.

  6. An alternative hybrid evolutionary technique focused on allocating machines and sequencing operations

    Directory of Open Access Journals (Sweden)

    Mariano Frutos

    2016-09-01

    Full Text Available We present here a hybrid algorithm for the Flexible Job-Shop Scheduling Problem (FJSSP. This problem involves the optimal use of resources in a flexible production environment in which each operation can be carried out by more than a single machine. Our algorithm allocates, in a first step, the machines to operations and in a second stage it sequences them by integrating a Multi-Objective Evolutionary Algorithm (MOEA and a path-dependent search algorithm (Multi-Objective Simulated Annealing, which is enacted at the genetic phase of the procedure. The joint interaction of those two components yields a very efficient procedure for solving the FJSSP. An important step in the development of the algorithm was the selection of the right MOEA. Candidates were tested on problems of low, medium and high complexity. Further analyses showed the relevance of the search algorithm in the hybrid structure. Finally, comparisons with other algorithms in the literature indicate that the performance of our alternative is good.

  7. STUDY OF MECHANICAL PROPERTIES OF BANANA-COIR HYBRID COMPOSITE USING EXPERIMENTAL AND FEM TECHNIQUES

    Directory of Open Access Journals (Sweden)

    T. Hariprasad

    2013-06-01

    Full Text Available The use of natural fibers as reinforcement in polymers has gained importance in recent years due to their eco-friendly nature. Thus, an investigation has been undertaken on banana-coir, which is a natural fiber abundantly available in India. Natural fibers are not only strong and lightweight, but also relatively very cheap. Composite plates were prepared with resin 392 g, coir 54 g, and banana 69 g. The purpose of this work is to establish the tensile, flexural, and impact properties of banana-coir reinforced composite materials with a thermo set for treated and untreated fibers. The resin used was epoxy (EP306. The tensile and impact tests showed that treated banana-coir epoxy hybrid composites have higher tensile strength and impact strength than untreated composites. However, untreated fiber composites have greater flexural strength than the treated fiber composites. The finite element analysis (FEA software ANSYS has been employed successfully to evaluate the properties. The stresses at the interface of the banana-coir and matrix, induced by the different loading conditions, were applied to predict the tensile, impact, and flexural properties by using the FEA models. The model output was compared with the experimental results and found to be close. This analysis is useful for realizing the advantages of hybrid fiber reinforced composites in structural applications and for identifying where the stresses are critical and damage the interface under varying loading conditions.

  8. Improved performance of hybrid error control techniques for real-time digital communications over noisy channels

    Science.gov (United States)

    Yang, Charlie Qing

    1993-06-01

    Delay-related performance characteristics are investigated for asynchronous time division multiplexing links. Two methods based on an imbedded Markov chain model are developed and applied to the system with a noisy feedback channel yielding analytical expressions for the buffer occupancy and the block delay. A recursive expression for packet loss probability for systems with a finite transmitter buffer is obtained. The concept of delay limited error control coding is introduced for real-time communications. Performance improvement by truncation of a type-2 hybrid automatic repeat-request (ARQ) protocol with one retransmission is examined showing that the truncated protocol has a bounded delay and bounded queue length under typical conditions. The error performance of the truncated protocol is further analyzed for various mobile fading channels. Matched rate hybrid error control coding for both adaptive and non-adaptive cases is also studied. A new adaptive error control protocol using Reed-Solomon codes is proposed using novel feedback transmissions to achieve faster estimation of channel states. Numerical optimization is carried out by introducing overall and modified throughput as efficiency criteria. Based on channel bit error rate measurement, optimum overall throughput is obtained with minimum implementation complexity.

  9. Hybrid technique coil embolisation for intrahepatic arterioportal fistula in a cat: case report

    Directory of Open Access Journals (Sweden)

    Akiko Uemura

    2016-04-01

    Full Text Available Case summary A 13-month-old, female, mixed breed, 4.0 kg cat was referred with a 6 month history of decreased appetite, loss of vigour and intermittent vomiting. Physical examination revealed no cyanosis or wasting, and no audible heart murmur was auscultated. Blood profile revealed mild anaemia and mildly elevated postprandial serum ammonia (109 µg/dl. Abdominal ultrasonography revealed dilation of an intrahepatic portal vein branch and an intrahepatic aneurysm, with splenomegaly and ascites. Hepatic arteriovenous fistula/hepatic artery–portal vein fistula with multiple acquired portosystemic shunts was strongly suspected. Medical control was achieved using antibiotics, liver-protecting agents, a low-protein diet and blood transfusions. However, because medical treatment proved ineffective, coil embolisation was performed on day 11, using a hybrid approach via the mesenteric vein. Subsequent follow-up showed good appetite, with no signs of diarrhoea or ascites. Abdominal ultrasonography revealed that the mosaic pattern around the site of coil placement in the portal vein branch had improved and pulsatility had disappeared. Relevance and novel information Intrahepatic arterioportal fistula involves a circulatory shunt between the hepatic artery and the hepatic or portal vein within the liver, and may be congenital or acquired. Both forms have been reported in humans, but most cases in cats have been congenital. Few reports have described treatment methods or prognosis in cats. We report here that coil embolisation using a hybrid approach is a procedure offering easy, effective treatment by blocking hepatofugal blood flow.

  10. DRYING OF EMPTY FRUIT BUNCHES AS WASTED BIOMASS BY HYBRID SOLAR–THERMAL DRYING TECHNIQUE

    Directory of Open Access Journals (Sweden)

    H. H. Al-Kayiem

    2013-12-01

    Full Text Available Solar drying of EFB is highly feasible and economic, but the solar drying process is interrupted during cloudy or rainy days and also at night. In the present paper, a combined solar, as the main heat input, and biomass burner, as an auxiliary source of thermal energy, has been investigated experimentally to dry EFB. An experimental model consisting of a solar dryer integrated with a thermal backup unit was designed and fabricated. A series of experimental measurements were carried out in four different drying modes, namely, open sun, mixed direct and indirect solar, thermal backup, and hybrid. The results from the four modes used to dry 2.5 kg of EFB were summarized and compared. The results indicated that the solar drying mode required around 52 to 80 hours to dry the EFB, while the open sun drying mode required 100 hours. Usage of the thermal backup as heat source reduced the drying time to 48–56 hours. With the hybrid mode, the drying time was considerably reduced to 24–32 hours. The results demonstrate that the combined solar and thermal backup effectively enhanced the drying performance. The application of a solar dryer with a biomass burner is practical for massive production of solid fuels from EFB.

  11. Active control of broadband sound transmission through an airplane trim panel using hybrid feedforward and feedback techniques

    Science.gov (United States)

    Ho, Yun-Ren

    This thesis presents a method of actively controlling the sound transmission through two designs of aircraft trim panels using a hybrid feedforward and feedback control technique. The active trim panels are designed for a high stiffness to mass ratio to allow only rigid body modal vibration in the frequency range of interest, thus simplifying the control technique, which is developed to minimize the vibration of a panel and therefore minimize the sound transmission. The hybrid controller consists of an adaptive feedforward (filtered-X LMS algorithm) controller in conjunction with a linear quadratic Gaussian (LQG) feedback controller. The LQG feedback controller is designed to alter the dynamics of the estimated plant model of the filtered-x LMS algorithm, improving control performance for both steady state and transient disturbances. Numerical simulations indicate that the hybrid controller is a more effective method of reducing the vibrations of the panels (and therefore the sound transmission) when compared to using only a feedforward or feedback controller. Experiments were carried out by using two trim panel designs, the first exhibiting only an out-of-plane piston mode, and the second exhibiting three rigid body modes and the first bending mode in control frequency range. For the first trim panel, the implementation of the active control experiment showed that a 5 to 20 dB reduction in both the vibration level and sound pressure level could be achieved over 50 to 500 Hz under a plane acoustic wave excitation. For the second trim panel, the hybrid controller achieved a 5 to 20 dB vibration reduction over the 50 to 400 Hz frequency band under structure-borne excitation. For air-borne excitation, the control scheme produced a 5 to 15 dB vibration reduction over the 70 to 400 Hz bandwidth with a reference microphone attached on the center of the fuselage skin and facing the sound source. In the near field (50 cm from the panel), the sound pressure levels measured

  12. Hybrid Neural-Network: Genetic Algorithm Technique for Aircraft Engine Performance Diagnostics Developed and Demonstrated

    Science.gov (United States)

    Kobayashi, Takahisa; Simon, Donald L.

    2002-01-01

    As part of the NASA Aviation Safety Program, a unique model-based diagnostics method that employs neural networks and genetic algorithms for aircraft engine performance diagnostics has been developed and demonstrated at the NASA Glenn Research Center against a nonlinear gas turbine engine model. Neural networks are applied to estimate the internal health condition of the engine, and genetic algorithms are used for sensor fault detection, isolation, and quantification. This hybrid architecture combines the excellent nonlinear estimation capabilities of neural networks with the capability to rank the likelihood of various faults given a specific sensor suite signature. The method requires a significantly smaller data training set than a neural network approach alone does, and it performs the combined engine health monitoring objectives of performance diagnostics and sensor fault detection and isolation in the presence of nominal and degraded engine health conditions.

  13. Enhancement of the mechanical properties of an aluminum metal matrix nanocomposite by the hybridization technique

    Directory of Open Access Journals (Sweden)

    Kalidindi Sita Rama Raju

    2016-07-01

    Full Text Available A uniform distribution of nanoparticles in the matrix plays a prominent role in improving the composite strength. In the present investigation, two types of launching vehicles, such as aluminum powder (primary and CNTs (secondary, are considered to uniformly carry and launch ultra-fine nanoparticles (13 nm into molten metal. The use of a secondary launching vehicle is identified to promote strengthening compared to a regular primary vehicle, as indicated by the good distribution observed from electron micrographs. CNTs are responsible for hybridizing the composite and also assist strengthening by anchoring to the matrix through the destroyed outer-walls and their axial orientation with the matrix. These results help us in attaining a strength of 197 MPa and a hardness of 93 BHN, with a minimal loss in ductility for the H-3 sample.

  14. FPGA techniques based new hybrid modulation strategies for voltage source inverters.

    Science.gov (United States)

    Sudha, L U; Baskaran, J; Elankurisil, S A

    2015-01-01

    This paper corroborates three different hybrid modulation strategies suitable for single-phase voltage source inverter. The proposed method is formulated using fundamental switching and carrier based pulse width modulation methods. The main tale of this proposed method is to optimize a specific performance criterion, such as minimization of the total harmonic distortion (THD), lower order harmonics, switching losses, and heat losses. The proposed method is articulated using fundamental switching and carrier based pulse width modulation methods. Thus, the harmonic pollution in the power system will be reduced and the power quality will be augmented with better harmonic profile for a target fundamental output voltage. The proposed modulation strategies are simulated in MATLAB r2010a and implemented in a Xilinx spartan 3E-500 FG 320 FPGA processor. The feasibility of these modulation strategies is authenticated through simulation and experimental results.

  15. Fusion techniques for hybrid ground-penetrating radar: electromagnetic induction landmine detection systems

    Science.gov (United States)

    Laffin, Matt; Mohamed, Magdi A.; Etebari, Ali; Hibbard, Mark

    2010-04-01

    Hybrid ground penetrating radar (GPR) and electromagnetic induction (EMI) sensors have advanced landmine detection far beyond the capabilities of a single sensing modality. Both probability of detection (PD) and false alarm rate (FAR) are impacted by the algorithms utilized by each sensing mode and the manner in which the information is fused. Algorithm development and fusion will be discussed, with an aim at achieving a threshold probability of detection (PD) of 0.98 with a low false alarm rate (FAR) of less than 1 false alarm per 2 square meters. Stochastic evaluation of prescreeners and classifiers is presented with subdivisions determined based on mine type, metal content, and depth. Training and testing of an optimal prescreener on lanes that contain mostly low metal anti-personnel mines is presented. Several fusion operators for pre-screeners and classifiers, including confidence map multiplication, will be investigated and discussed for integration into the algorithm architecture.

  16. Technique of performing construction works by machines with hybrid: manual and remote control

    Directory of Open Access Journals (Sweden)

    Sevryugina Nadezhda

    2017-01-01

    Full Text Available The article discusses issues dealing with efficiency of construction work mechanization. It offers a mathematical model for assessment of mutual influence between the members of the ‘construction site-machine-operator’ system triad, that can give a quantitative assessment of how the efficiency of a technological task varies with more comprehensive use of operational capacities of the machine, while lower effect that limiting parameters of production environment and technical condition of the machine have on the operator. The article contains a constructive remote control solution for upgrade of the base machine. It describes the conditions for using the machines with hybrid: manual and remote control at construction sites. There is also an imitation model of operator’s scanning pattern and data experimental research that prove the efficiency of remotely controlled technological operations. The article proves that lower psychological load on the operator and better comfort contribute to positive economic effect and higher quality of the construction process.

  17. Wind Power Forecasting techniques in complex terrain: ANN vs. ANN-CFD hybrid approach

    Science.gov (United States)

    Castellani, Francesco; Astolfi, Davide; Mana, Matteo; Burlando, Massimiliano; Meißner, Cathérine; Piccioni, Emanuele

    2016-09-01

    Due to technology developments, renewable energies are becoming competitive against fossil sources and the number of wind farms is growing, which have to be integrated into power grids. Therefore, accurate power forecast is needed and often operators are charged with penalties in case of imbalance. Yet, wind is a stochastic and very local phenomenon, and therefore hard to predict. It has a high variability in space and time and wind power forecast is challenging. Statistical methods, as Artificial Neural Networks (ANN), are often employed for power forecasting, but they have some shortcomings: they require data sets over several years and are not able to capture tails of wind power distributions. In this work a pure ANN power forecast is compared against a hybrid method, based on the combination of ANN and a physical method using computational fluid dynamics (CFD). The validation case is a wind farm sited in southern Italy in a very complex terrain, with a wide spread turbine layout.

  18. A hybrid fringe analysis technique for the elimination of random noise in interferometric wrapped phase maps

    Science.gov (United States)

    Bhat, Gopalakrishna K.

    1994-10-01

    A fringe analysis technique, which makes use of the spatial filtering property of the Fourier transform method, for the elimination of random impulsive noise in the wrapped phase maps obtained using the phase stepping technique, is presented. Phase noise is converted into intensity noise by transforming the wrapped phase map into a continuous fringe pattern inside the digital image processor. Fourier transform method is employed to filter out the intensity noise and recover the clean wrapped phase map. Computer generated carrier fringes are used to preserve the sign information. This technique makes the two dimensional phase unwrapping process less involved, because it eliminates the local phase fluctuations, which act as pseudo 2π discontinuities. The technique is applied for the elimination of noise in a phase map obtained using electro-optic holography.

  19. Prediction of daily rainfall by a hybrid wavelet-season-neuro technique

    Science.gov (United States)

    Altunkaynak, Abdusselam; Nigussie, Tewodros Assefa

    2015-10-01

    Accurate daily rainfall prediction is required for accurate streamflow prediction, flooding risk analysis, constructing a reliable flood control and early warning system. However, because of its nonlinearity, prediction of daily rainfall with high accuracy and long prediction lead time is difficult. There are many daily rainfall prediction methods in the literature, but they are known to yield inaccurate predictions with short lead time, require many physical parameters and involve complicated mathematical equations with huge computational burden. Recently, artificial neural network has been used for predicting rainfall with the objective of addressing the above mentioned problems. But still, the accuracy has not been satisfactory and predictions are with short lead time. In this study, two methods called combined season-multilayer perceptron (SAS-MP) and hybrid wavelet-season-multilayer perceptron (W-SAS-MP) were developed to enhance prediction accuracy and extend prediction lead time of daily rainfall up to 5 days by using data from two stations in Turkey. These two models were compared with the stand-alone multilayer perceptron and another most commonly used method called combined wavelet-multilayer perceptron (W-MP). The performances of the models were evaluated by using coefficient of determination, coefficient of efficiency and root mean squared error. The SAS-MP model was found to be better than W-MP in most cases, except lead time day 1, where W-MP performed better. Throughout all the lead times, however, the hybrid W-SAS-MP model performed best with CE values of 0.911 and 0.909, respectively, for prediction lead time of 1 day and 0.588 and 0.570, respectively, for prediction lead time of 5 days at Stations 17836 and 17837, respectively, at the model testing (validation) phase. Therefore, W-SAS-MP can be an appropriate tool for enhancing daily rainfall prediction accuracy and extend prediction lead time.

  20. Distributed-parameter problem solved on a hybrid computer by a modified function storage technique

    DEFF Research Database (Denmark)

    Poulsen, N.J.

    1969-01-01

    Describes a method which is based on a function storage technique improved by a number of modifications; it fulfils the two main demands: the solution is based directly on the physical equations, and is accurate within 1%......Describes a method which is based on a function storage technique improved by a number of modifications; it fulfils the two main demands: the solution is based directly on the physical equations, and is accurate within 1%...

  1. A Low Cost Vision Based Hybrid Fiducial Mark Tracking Technique for Mobile Industrial Robots

    OpenAIRE

    Mohammed Y Aalsalem; Wazir Zada Khan; Quratul Ain Arshad

    2012-01-01

    The field of robotic vision is developing rapidly. Robots can react intelligently and provide assistance to user activities through sentient computing. Since industrial applications pose complex requirements that cannot be handled by humans, an efficient low cost and robust technique is required for the tracking of mobile industrial robots. The existing sensor based techniques for mobile robot tracking are expensive and complex to deploy, configure and maintain. Also some of them demand dedic...

  2. Applying Subtractive Hybridization Technique to Enrich and Amplify Tumor-Specific Transcripts of Esophageal Squamous Cell Carcinoma.

    Science.gov (United States)

    Mahmoudian, Reihaneh Alsadat; Abbaszadegan, Mohammad Reza; Gholamin, Mehran

    2017-04-01

    Subtractive hybridization (SH) as an efficient and powerful approach can be applied to isolate differentially expressed transcripts as well as detect of involved mRNAs in various cellular processes, particularly diseases and malignancies. This procedure leads to the enrichment of specific low copy transcripts of tumor cells. Having developed a new approach for SH to isolate tumor specific transcripts, we facilitated discovery of uniquely expressed genes in esophageal squamous cell carcinoma (ESCC). Total RNA was extracted from the fresh tumoral and their adjacent normal tissues, and purified using the Switch Mechanism At the 5' end of Reverse Transcript (SMART) method. Following cDNA synthesis of normal mRNAs using magnetic beads, it was hybridized with tumor mRNAs. To enhance efficiency of subtraction, hybridization was repeated three rounds. Finally, amplification of subtracted tumor-specific transcripts was carried out using in vitro transcription. The subtracted tumoral mRNAs was analyzed quantitatively using real-time PCR for both tumor-specific and housekeeping genes. The subtracted mRNA was confirmed as tumor-specific mRNA pool using RT-PCR and quantitative real-time PCR assessment. The elevated level of tumor-specific transcripts such as MAGE-A4 and CD44 as well as declined copy number of housekeeping genes such as GAPDH, β actin and β2-microglobulin, were confirmed in subtracted tumoral mRNA. The presence of tumor genes was confirmed after the SH procedure. The designed SH method in combination with SMART technique can isolate and amplify high quality tumor-specific transcripts even from small amount of tumor tissues. Removal of common transcripts from the extracted tumoral mRNAs using SH, leads to the enrichment of tumor-specific transcripts. The isolated transcripts are of interest because of their probable roles in ESCC progression and development. In addition, these tumor-specific mRNAs can be applied for future vaccine cancer studies.

  3. Electromagnetic self-consistent field initialization and fluid advance techniques for hybrid-kinetic PWFA code Architect

    Science.gov (United States)

    Massimo, F.; Marocchino, A.; Rossi, A. R.

    2016-09-01

    The realization of Plasma Wakefield Acceleration experiments with high quality of the accelerated bunches requires an increasing number of numerical simulations to perform first-order assessments for the experimental design and online-analysis of the experimental results. Particle in Cell codes are the state-of-the-art tools to study the beam-plasma interaction mechanism, but due to their requirements in terms of number of cores and computational time makes them unsuitable for quick parametric scans. Considerable interest has been shown thus in methods which reduce the computational time needed for the simulation of plasma acceleration. Such methods include the use of hybrid kinetic-fluid models, which treat the relativistic bunches as in a PIC code and the background plasma electrons as a fluid. A technique to properly initialize the bunch electromagnetic fields in the time explicit hybrid kinetic-fluid code Architect is presented, as well the implementation of the Flux Corrected Transport scheme for the fluid equations integrated in the code.

  4. Model Predictive Control techniques with application to photovoltaic, DC Microgrid, and a multi-sourced hybrid energy system

    Science.gov (United States)

    Shadmand, Mohammad Bagher

    Renewable energy sources continue to gain popularity. However, two major limitations exist that prevent widespread adoption: availability and variability of the electricity generated and the cost of the equipment. The focus of this dissertation is Model Predictive Control (MPC) for optimal sized photovoltaic (PV), DC Microgrid, and multi-sourced hybrid energy systems. The main considered applications are: maximum power point tracking (MPPT) by MPC, droop predictive control of DC microgrid, MPC of grid-interaction inverter, MPC of a capacitor-less VAR compensator based on matrix converter (MC). This dissertation firstly investigates a multi-objective optimization technique for a hybrid distribution system. The variability of a high-penetration PV scenario is also studied when incorporated into the microgrid concept. Emerging (PV) technologies have enabled the creation of contoured and conformal PV surfaces; the effect of using non-planar PV modules on variability is also analyzed. The proposed predictive control to achieve maximum power point for isolated and grid-tied PV systems speeds up the control loop since it predicts error before the switching signal is applied to the converter. The low conversion efficiency of PV cells means we want to ensure always operating at maximum possible power point to make the system economical. Thus the proposed MPPT technique can capture more energy compared to the conventional MPPT techniques from same amount of installed solar panel. Because of the MPPT requirement, the output voltage of the converter may vary. Therefore a droop control is needed to feed multiple arrays of photovoltaic systems to a DC bus in microgrid community. Development of a droop control technique by means of predictive control is another application of this dissertation. Reactive power, denoted as Volt Ampere Reactive (VAR), has several undesirable consequences on AC power system network such as reduction in power transfer capability and increase in

  5. All-optical delay technique for supporting multiple antennas in a hybrid optical - wireless transmission system

    DEFF Research Database (Denmark)

    Prince, Kamau; Chiuchiarelli, A; Presi, M

    2008-01-01

    We introduce a novel continuously-variable optical delay technique to support beam-forming wireless communications systems using antenna arrays. We demonstrate delay with 64-QAM modulated signals at a rate of 15 Msymbol/sec with 2.5 GHz carrier frequency.......We introduce a novel continuously-variable optical delay technique to support beam-forming wireless communications systems using antenna arrays. We demonstrate delay with 64-QAM modulated signals at a rate of 15 Msymbol/sec with 2.5 GHz carrier frequency....

  6. A Hybrid VLM Preceded SLM Technique Using Clipping and Filtering Method for PAPR Reduction in MIMO-OFDM Systems

    Directory of Open Access Journals (Sweden)

    Meenakshi

    2016-07-01

    Full Text Available MIMO-OFDM is an attractive interface for the next generation WLANs, WMAN, 4G and 5G mobile cellular systems. However the performance of the MIMO-OFDM systems is affected by Peak to Average Power Ratio (PAPR. PAPR is the main disadvantage associated with the MIMO-OFDM systems. So far, many techniques have been proposed to reduce the value of PAPR but high PAPR for MIMO-OFDM systems is still a demanding area and a different issue.In this paper, a hybrid VLM precoded SLM scheme using Clipping & Filtering has been proposed to reduce PAPR in MIMO-OFDM systems. And it has been observed that the proposed scheme has achieved a significant gain in PAPR reduction without increasing the system complexity and affecting the error performance of the system

  7. Therapeutic efficacy of a hybrid mandibular advancement device in the management of obstructive sleep apnea assessed with acoustic reflection technique

    Directory of Open Access Journals (Sweden)

    S S Agarwal

    2015-01-01

    Full Text Available Obstructive sleep apnea (OSA is one of the most common forms of sleep-disordered breathing. Various treatment modalities include behavior modification therapy, nasal continuous positive airway pressure (CPAP, oral appliance therapy, and various surgical modalities. Oral appliances are noninvasive and recommended treatment modality for snoring, mild to moderate OSA cases and severe OSA cases when patient is not compliant to CPAP therapy and unwilling for surgery. Acoustic reflection technique (ART is a relatively new modality for three-dimensional assessment of airway caliber in various clinical situations. The accuracy and reproducibility of acoustic rhinometry and acoustic pharyngometry assessment are comparable to computerized tomography and magnetic resonance imaging. This case report highlights the therapeutic efficacy of an innovative customized acrylic hybrid mandibular advancement device in the management of polysomnography diagnosed OSA cases, and the treatment results were assessed by ART.

  8. Hybrid vapor phase-solution phase growth techniques for improved CZT(S,Se) photovoltaic device performance

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Liang-Yi; Gershon, Talia S.; Haight, Richard A.; Lee, Yun Seog

    2016-12-27

    A hybrid vapor phase-solution phase CZT(S,Se) growth technique is provided. In one aspect, a method of forming a kesterite absorber material on a substrate includes the steps of: depositing a layer of a first kesterite material on the substrate using a vapor phase deposition process, wherein the first kesterite material includes Cu, Zn, Sn, and at least one of S and Se; annealing the first kesterite material to crystallize the first kesterite material; and depositing a layer of a second kesterite material on a side of the first kesterite material opposite the substrate using a solution phase deposition process, wherein the second kesterite material includes Cu, Zn, Sn, and at least one of S and Se, wherein the first kesterite material and the second kesterite material form a multi-layer stack of the absorber material on the substrate. A photovoltaic device and method of formation thereof are also provided.

  9. Hybrid vapor phase-solution phase growth techniques for improved CZT(S,Se) photovoltaic device performance

    Science.gov (United States)

    Chang, Liang-Yi; Gershon, Talia S.; Haight, Richard A.; Lee, Yun Seog

    2016-12-27

    A hybrid vapor phase-solution phase CZT(S,Se) growth technique is provided. In one aspect, a method of forming a kesterite absorber material on a substrate includes the steps of: depositing a layer of a first kesterite material on the substrate using a vapor phase deposition process, wherein the first kesterite material includes Cu, Zn, Sn, and at least one of S and Se; annealing the first kesterite material to crystallize the first kesterite material; and depositing a layer of a second kesterite material on a side of the first kesterite material opposite the substrate using a solution phase deposition process, wherein the second kesterite material includes Cu, Zn, Sn, and at least one of S and Se, wherein the first kesterite material and the second kesterite material form a multi-layer stack of the absorber material on the substrate. A photovoltaic device and method of formation thereof are also provided.

  10. Treatment of breast cancer with simultaneous integrated boost in hybrid plan technique. Influence of flattening filter-free beams

    Energy Technology Data Exchange (ETDEWEB)

    Bahrainy, Marzieh; Kretschmer, Matthias; Joest, Vincent; Kasch, Astrid; Wuerschmidt, Florian; Dahle, Joerg; Lorenzen, Joern [Radiologische Allianz, Hamburg (Germany)

    2016-05-15

    The present study compares in silico treatment plans using hybrid plan technique during hypofractionated radiation of mammary carcinoma with simultaneous integrated boost (SIB). The influence of 6 MV photon radiation in flattening filter free (FFF) mode against the clinical standard flattening filter (FF) mode is to be examined. RT planning took place with FF and FFF radiation plans for 10 left-sided breast cancer patients. Hybrid plans were realised with two tangential IMRT fields and one VMAT field. The dose prescription was in line with the guidelines in the ARO-2010-01 study. The dosimetric verification took place with a manufacturer-independent measurement system. Required dose prescriptions for the planning target volumes (PTV) were achieved for both groups. The average dose values of the ipsi- and contralateral lung and the heart did not differ significantly. The overall average incidental dose to the left anterior descending artery (LAD) of 8.24 ± 3.9 Gy in the FFF group and 9.05 ± 3.7 Gy in the FF group (p < 0.05) were found. The dosimetric verifications corresponded to the clinical requirements. FFF-based RT plans reduced the average treatment time by 17 s/fraction. In comparison to the FF-based hybrid plan technique the FFF mode allows further reduction of the average LAD dose for comparable target volume coverage without adverse low-dose exposure of contralateral structures. The combination of hybrid plan technique and 6 MV photon radiation in the FFF mode is suitable for use with hypofractionated dose schemes. The increased dose rate allows a substantial reduction of treatment time and thus beneficial application of the deep inspiration breath hold technique. (orig.) [German] Vergleich der ''In-silico''-Bestrahlungsplaene der klinisch etablierten Hybridplan-Technik bei hypofraktionierter Bestrahlung des Mammakarzinoms mit simultan integriertem Boost (SIB). Untersucht wird der Einfluss von 6MV-Photonenstrahlung im Flattening

  11. Comparison and performance analysis of closed loop controlled nonlinear system connected PWM inverter based on hybrid technique

    Directory of Open Access Journals (Sweden)

    V.M. Deshmukh

    2015-05-01

    Full Text Available This paper proposed closed loop control of nonlinear system connected inverter based on the optimal neural controller (ONC. The novelty of the proposed method rests on the hybrid technique which is the combined performance of both, particle swarm optimization (PSO technique and Radial basis function neural network (RBFNN. It effectively optimizes the feasible solutions by updating the generations, by taking lesser time with greater reliability. In the proposed method, the PSO generates the dataset according to different loading conditions. The RBFNN is trained by using the target control signals along with the corresponding input load voltage error and change in error. Depending on the load variations, the RBFNN predicts the exact control signals of the inverter during the testing time. Since experimentation and comparison of such inverter models on hardware being relatively expensive, the proposed method is implemented in the MATLAB/Simulink platform and the performance has been validated through the comparison analysis with the conventional techniques. The comparison results have proved the superiority of the proposed method.

  12. 3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques

    Science.gov (United States)

    Zhang, Bin; Seong, Baekhoon; Nguyen, VuDat; Byun, Doyoung

    2016-02-01

    Recently, the three-dimensional (3D) printing technique has received much attention for shape forming and manufacturing. The fused deposition modeling (FDM) printer is one of the various 3D printers available and has become widely used due to its simplicity, low-cost, and easy operation. However, the FDM technique has a limitation whereby its patterning resolution is too low at around 200 μm. In this paper, we first present a hybrid mechanism of electrohydrodynamic jet printing with the FDM technique, which we name E-FDM. We then develop a novel high-resolution 3D printer based on the E-FDM process. To determine the optimal condition for structuring, we also investigated the effect of several printing parameters, such as temperature, applied voltage, working height, printing speed, flow-rate, and acceleration on the patterning results. This method was capable of fabricating both high resolution 2D and 3D structures with the use of polylactic acid (PLA). PLA has been used to fabricate scaffold structures for tissue engineering, which has different hierarchical structure sizes. The fabrication speed was up to 40 mm/s and the pattern resolution could be improved to 10 μm.

  13. Real-time hybrid simulation technique for performance evaluation of full-scale sloshing dampers in wind turbines

    Science.gov (United States)

    Zhang, Zili; Basu, Biswajit; Nielsen, Saren R. K.

    2016-09-01

    As a variation of the pseudodynamic testing technique, the real-time hybrid simulation (RTHS) technique is executed in real time, thus allowing investigation of structural systems with rate-dependent components. In this paper, the RTHS is employed for performance evaluation of full-scale liquid sloshing dampers in multi-megawatt wind turbines, where the tuned liquid damper (TLD) is manufactured and tested as the physical substructure while the wind turbine is treated as the numerical substructure and modelled in the computer using a 13-degree-of-freedom (13-DOF) aeroelastic model. Wind turbines with 2 MW and 3 MW capacities have been considered under various turbulent wind conditions. Extensive parametric studies have been performed on the TLD, e.g., various tuning ratios by changing the water level, TLD without and with damping screens (various mesh sizes of the screen considered), and TLD with flat and sloped bottoms. The present study provides useful guidelines for employing sloshing dampers in large wind turbines, and indicates huge potentials of applying RTHS technique in the area of wind energy.

  14. Screening for cardiac HERG potassium channel interacting proteins using the yeast two-hybrid technique.

    Science.gov (United States)

    Ma, Qingyan; Yu, Hong; Lin, Jijin; Sun, Yifan; Shen, Xinyuan; Ren, Li

    2014-02-01

    The human ERG protein (HERG or Kv 11.1) encoded by the human ether-a-go-go-related gene (herg) is the pore-forming subunit of the cardiac delayed rectifier potassium current (IKr) responsible for action potential (AP) repolarization. Mutations in HERG lead to long-QT syndrome, a major cause of arrhythmias. Protein-protein interactions are fundamental for ion channel trafficking, membrane localization, and functional modulation. To identify proteins involved in the regulation of the HERG channel, we conducted a yeast two-hybrid screen of a human heart cDNA library using the C-terminus or N-terminus of HERG as bait. Fifteen proteins were identified as HERG amino terminal (HERG-NT)-interacting proteins, including Caveolin-1 (a membrane scaffold protein with multiple interacting partners, including G-proteins, kinases and NOS), the zinc finger protein, FHL2 and PTPN12 (a non-receptor tyrosine phosphatase). Eight HERG carboxylic terminal (HERG-CT)-interacting proteins were also identified, including the NF-κB-interacting protein myotrophin, We have identified multiple potential interacting proteins that may regulate cardiac IKr through cytoskeletal interactions, G-protein modulation, phosphorylation and downstream second messenger and transcription cascades. These findings provide further insight into dynamic modulation of HERG under physiological conditions and arrhythmogenesis.

  15. Speeding-up the hybrid video watermarking techniques in the DWT domain

    Science.gov (United States)

    Chammem, A.; Mitrea, M.; Preteux, F.

    2010-01-01

    The watermarking state of the art exhibits the hybrid methods combining spread spectrum and side information principles. The present study is focussed on speeding up such an algorithm (jointly patented by SFR - Vodafone Group and Institut Telecom). The dead lock on the reference method is first identified: the embedding module accounts for 90% of the whole watermarking chain and that more than 99% of this time is spent on applying an attack procedure (required in order to grant a good robustness to this method). The main issue of the present study is to deploy Monte Carlo generators accurately representing the watermarking attacks. In this respect, two difficulties should be overcome. First, accurate statistical models for the watermarking attacks should be obtained. Secondly, efficient Monte Carlo simulators should be deployed for these models. The last part of the study was devoted to the experimental validations. The mark is inserted in the (9,7) DWT representation of video sequence. Several types of attacks have been considered (linear and non-linear filters, geometrical transformations, ...). The quantitative results proved that the data payload, transparency and robustness properties have been inherited from the reference method. However, the watermarking speed was increased by a factor of 80.

  16. Entrapment of glucoamylase by sol-gel technique in PhTES/TEOS hybrid matrixes

    Directory of Open Access Journals (Sweden)

    B. Vlad-Oros

    2007-12-01

    Full Text Available Mesoporous silica particles were prepared by the sol-gel method from different alkoxysilane precursors and used as a host matrix for encapsulation of glucoamylase, an enzyme widely used in fermentative industry. The aim was to investigate the physico-chemical properties of the different silica powders and their effect on the enzyme kinetics. The encapsulated enzymes followed Michaelis-Menten kinetics. The Michaelis constant (KM and the maximum rate of starch hydrolysis reaction (Vmax were calculated according to the Michaelis-Menten and Lineweaver-Burke plots. The values of the Michaelis constant (KM of the encapsulated enzymes were higher than those of the free enzyme. The temperature and pH infl uence on the activity of free and immobilized glucoamylase were also compared. The results of this study show that the enzymes immobilized in organic/inorganic hybrid silica matrixes (obtained by the sol-gel method, allowing the entrapped glucoamylase to retain its biological activity, are suitable for many different applications, (medicinal, clinical, analytical.

  17. Prediction of peak ground acceleration of Iran's tectonic regions using a hybrid soft computing technique

    Directory of Open Access Journals (Sweden)

    Mostafa Gandomi

    2016-01-01

    Full Text Available A new model is derived to predict the peak ground acceleration (PGA utilizing a hybrid method coupling artificial neural network (ANN and simulated annealing (SA, called SA-ANN. The proposed model relates PGA to earthquake source to site distance, earthquake magnitude, average shear-wave velocity, faulting mechanisms, and focal depth. A database of strong ground-motion recordings of 36 earthquakes, which happened in Iran's tectonic regions, is used to establish the model. For more validity verification, the SA-ANN model is employed to predict the PGA of a part of the database beyond the training data domain. The proposed SA-ANN model is compared with the simple ANN in addition to 10 well-known models proposed in the literature. The proposed model performance is superior to the single ANN and other existing attenuation models. The SA-ANN model is highly correlated to the actual records (R = 0.835 and ρ = 0.0908 and it is subsequently converted into a tractable design equation.

  18. Fast hybrid CPU- and GPU-based CT reconstruction algorithm using air skipping technique.

    Science.gov (United States)

    Lee, Byeonghun; Lee, Ho; Shin, Yeong Gil

    2010-01-01

    This paper presents a fast hybrid CPU- and GPU-based CT reconstruction algorithm to reduce the amount of back-projection operation using air skipping involving polygon clipping. The algorithm easily and rapidly selects air areas that have significantly higher contrast in each projection image by applying K-means clustering method on CPU, and then generates boundary tables for verifying valid region using segmented air areas. Based on these boundary tables of each projection image, clipped polygon that indicates active region when back-projection operation is performed on GPU is determined on each volume slice. This polygon clipping process makes it possible to use smaller number of voxels to be back-projected, which leads to a faster GPU-based reconstruction method. This approach has been applied to a clinical data set and Shepp-Logan phantom data sets having various ratio of air region for quantitative and qualitative comparison and analysis of our and conventional GPU-based reconstruction methods. The algorithm has been proved to reduce computational time to half without losing any diagnostic information, compared to conventional GPU-based approaches.

  19. A novel reconstruction method for giant incisional hernia: Hybrid laparoscopic technique

    Directory of Open Access Journals (Sweden)

    G Ozturk

    2015-01-01

    Full Text Available Background and Objectives: Laparoscopic reconstruction of ventral hernia is a popular technique today. Patients with large defects have various difficulties of laparoscopic approach. In this study, we aimed to present a new reconstruction technique that combines laparoscopic and open approach in giant incisional hernias. Materials and Methods: Between January 2006 and August 2012, 28 patients who were operated consequently for incisional hernia with defect size over 10 cm included in this study and separated into two groups. Group 1 (n = 12 identifies patients operated with standard laparoscopic approach, whereas group 2 (n = 16 labels laparoscopic technique combined with open approach. Patients were evaluated in terms of age, gender, body mass index (BMI, mean operation time, length of hospital stay, surgical site infection (SSI and recurrence rate. Results: There are 12 patients in group 1 and 16 patients in group 2. Mean length of hospital stay and SSI rates are similar in both groups. Postoperative seroma formation was observed in six patients for group 1 and in only 1 patient for group 2. Group 1 had 1 patient who suffered from recurrence where group 2 had no recurrence. Discussion: Laparoscopic technique combined with open approach may safely be used as an alternative method for reconstruction of giant incisional hernias.

  20. Hybrid Decompression and Fixation Technique Versus Plated 3-Vertebra Corpectomy for 4-Segment Cervical Myelopathy: Analysis of 81 Cases With a Minimum 2-Year Follow-Up.

    Science.gov (United States)

    Odate, Seiichi; Shikata, Jitsuhiko; Kimura, Hiroaki; Soeda, Tsunemitsu

    2016-07-01

    A retrospective comparative study. The purpose of this study was to compare the stability and outcomes of a hybrid technique with those of a 3-vertebra corpectomy in the management of 4-segment cervical myelopathy. Patients with primarily ventral disease and loss of cervical lordosis are considered good candidates for anterior surgery. Cervical corpectomy is commonly performed in patients with multilevel cervical myelopathy. Corpectomies including >3 vertebraes entail an extremely high risk of reconstruction failure. To avoid the need to perform a 3-vertebra corpectomy, we use a hybrid decompression and fixation technique. This hybrid technique is a technique to obtain optimum decompression and fixation in patients with multilevel cervical myelopathy. A total of 81 patients with multilevel cervical myelopathy who underwent 4-segment cervical fixation with a minimum 2-year follow-up were included. The hybrid technique involved combining a plated 2-vertebra corpectomy and single-level discectomy with stand-alone cage fixation. This technique was performed in 39 patients, and the plated 3-vertebra corpectomy was performed in 42 patients. Nine patients (21%) who underwent the plated 3-vertebra corpectomy were treated with halo immobilization, but no patient in the hybrid group required this treatment (P=0.002). There were fewer instances of reconstruction failure in the hybrid group than in the 3-vertebra corpectomy group (0% vs. 10%, respectively; P=0.048) and fewer instances of C5 palsy (3% vs. 17%, respectively; P vertebra corpectomy for 4-segment cervical fixation: a shorter graft bone and plate are required; the fixed segment has greater initial stability; postoperative external immobilization is simplified; and the risk of reconstruction failure and postoperative C5 palsy is reduced markedly.

  1. Hybrid microelectronic technology

    Science.gov (United States)

    Moran, P.

    Various areas of hybrid microelectronic technology are discussed. The topics addressed include: basic thick film processing, thick film pastes and substrates, add-on components and attachment methods, thin film processing, and design of thick film hybrid circuits. Also considered are: packaging hybrid circuits, automating the production of hybrid circuits, application of hybrid techniques, customer's view of hybrid technology, and quality control and assurance in hybrid circuit production.

  2. Hybrid dynamic radioactive particle tracking (RPT) calibration technique for multiphase flow systems

    Science.gov (United States)

    Khane, Vaibhav; Al-Dahhan, Muthanna H.

    2017-04-01

    The radioactive particle tracking (RPT) technique has been utilized to measure three-dimensional hydrodynamic parameters for multiphase flow systems. An analytical solution to the inverse problem of the RPT technique, i.e. finding the instantaneous tracer positions based upon instantaneous counts received in the detectors, is not possible. Therefore, a calibration to obtain a counts-distance map is needed. There are major shortcomings in the conventional RPT calibration method due to which it has limited applicability in practical applications. In this work, the design and development of a novel dynamic RPT calibration technique are carried out to overcome the shortcomings of the conventional RPT calibration method. The dynamic RPT calibration technique has been implemented around a test reactor with 1foot in diameter and 1 foot in height using Cobalt-60 as an isotopes tracer particle. Two sets of experiments have been carried out to test the capability of novel dynamic RPT calibration. In the first set of experiments, a manual calibration apparatus has been used to hold a tracer particle at known static locations. In the second set of experiments, the tracer particle was moved vertically downwards along a straight line path in a controlled manner. The obtained reconstruction results about the tracer particle position were compared with the actual known position and the reconstruction errors were estimated. The obtained results revealed that the dynamic RPT calibration technique is capable of identifying tracer particle positions with a reconstruction error between 1 to 5.9 mm for the conditions studied which could be improved depending on various factors outlined here.

  3. Establishment of Relationships between Material Design and Product Design Domains by Hybrid FEM-ANN Technique

    CERN Document Server

    Prakash, K Soorya; Raj, M Joseph Malvin

    2010-01-01

    In this paper, research on AI based modeling technique to optimize development of new alloys with necessitated improvements in properties and chemical mixture over existing alloys as per functional requirements of product is done. The current research work novels AI in lieu of predictions to establish association between material and product customary. Advanced computational simulation techniques like CFD, FEA interrogations are made viable to authenticate product dynamics in context to experimental investigations. Accordingly, the current research is focused towards binding relationships between material design and product design domains. The input to feed forward back propagation prediction network model constitutes of material design features. Parameters relevant to product design strategies are furnished as target outputs. The outcomes of ANN shows good sign of correlation between material and product design domains. The study enriches a new path to illustrate material factors at the time of new product d...

  4. On Potentials and Limitations of a Hybrid WLAN-RFID Indoor Positioning Technique

    Directory of Open Access Journals (Sweden)

    Silverio C. Spinella

    2010-01-01

    Full Text Available This paper addresses the important issue of position estimation in indoor environments. Starting point of the research is positioning techniques that exploit the knowledge of power levels of RF signals from multiple 802.11 WLAN APs (Access Points. In particular, the key idea in this paper is to enhance the performance of a WLAN fingerprinting approach by coupling it to a RFID-based procedure. WLAN and RFID technologies are synergistically used to provide a platform for a more performing positioning process, in which the very strong identification capabilities of the RFID technology allow to increase the accuracy of positioning systems via WLAN fingerprinting. The algorithm performance is assessed through general and repeatable experimental campaigns, during which the main algorithm parameters are dimensioned. The results testify both to the feasibility of the solution and to its higher accuracy (attainable at very reduced costs compared to traditional positioning techniques.

  5. Evaluation and Optimization Study on a Hybrid EOR Technique Named as Chemical-Alternating-Foam Floods

    Directory of Open Access Journals (Sweden)

    Xu Xingguang

    2017-01-01

    Full Text Available This work presents a novel Enhanced Oil Recovery (EOR method called Chemical-Alternating-Foam (CAF floods in order to overcome the drawbacks of the conventional foam flooding such as insufficient amount of in-situ foams, severe foam collapse and surfactant retention. The first part of this research focused on the comparison of conventional foam floods and CAF floods both of which had the same amount of gas and chemicals. It showed that: (1 CAF floods possessed the much greater Residual Resistance Factor (RRF at elevated temperature; (2 the accumulative oil recovery of the CAF floods was 10%-15% higher than that of the conventional foam flooding. After 1.8 Pore Volume (PV injection, the oil recovery reached the plateau for both methods; (3 CAF floods yielded the most amount of incremental oil at the 98% water cut (water content in the effluent, while the continuous foam floods achieved the best performance at 60% water cut. The second part of this work determined the optimal foam quality (gas/liquid ratio or the volume percent gas within foam, chemical/foam slug size ratio, cycle number and injection sequence for the CAF floods. It was found that the CAF was endowed with the peak performance if the foam quality, chemical/foam slug size ratio, cycle number was fixed at 80%, 1:1 and 3 respectively with the chemical slug being introduced ahead of the foam slug. Through systematic and thorough research, the proposed hybrid process has been approved to be a viable and effective method significantly strengthening the conventional foam flooding.

  6. High process yield rates of thermoplastic nanofluidic devices using a hybrid thermal assembly technique.

    Science.gov (United States)

    Uba, Franklin I; Hu, Bo; Weerakoon-Ratnayake, Kumuditha; Oliver-Calixte, Nyote; Soper, Steven A

    2015-02-21

    Over the past decade, thermoplastics have been used as alternative substrates to glass and Si for microfluidic devices because of the diverse and robust fabrication protocols available for thermoplastics that can generate high production rates of the desired structures at low cost and with high replication fidelity, the extensive array of physiochemical properties they possess, and the simple surface activation strategies that can be employed to tune their surface chemistry appropriate for the intended application. While the advantages of polymer microfluidics are currently being realized, the evolution of thermoplastic-based nanofluidic devices is fraught with challenges. One challenge is assembly of the device, which consists of sealing a cover plate to the patterned fluidic substrate. Typically, channel collapse or substrate dissolution occurs during assembly making the device inoperable resulting in low process yield rates. In this work, we report a low temperature hybrid assembly approach for the generation of functional thermoplastic nanofluidic devices with high process yield rates (>90%) and with a short total assembly time (16 min). The approach involves thermally sealing a high T(g) (glass transition temperature) substrate containing the nanofluidic structures to a cover plate possessing a lower T(g). Nanofluidic devices with critical feature sizes ranging between 25-250 nm were fabricated in a thermoplastic substrate (T(g) = 104 °C) and sealed with a cover plate (T(g) = 75 °C) at a temperature significantly below the T(g) of the substrate. Results obtained from sealing tests revealed that the integrity of the nanochannels remained intact after assembly and devices were useful for fluorescence imaging at high signal-to-noise ratios. The functionality of the assembled devices was demonstrated by studying the stretching and translocation dynamics of dsDNA in the enclosed thermoplastic nanofluidic channels.

  7. Development of a wireless bridge monitoring system for condition assessment using hybrid techniques

    Science.gov (United States)

    Whelan, Matthew J.; Fuchs, Michael P.; Gangone, Michael V.; Janoyan, Kerop D.

    2007-04-01

    The introduction and development of wireless sensor network technology has resulted in rapid growth within the field of structural health monitoring (SHM), as the dramatic cable costs associated with instrumentation of large civil structures is potentially alleviated. Traditionally, condition assessment of bridge structures is accomplished through the use of either vibration measurements or strain sensing. One approach is through quantifying dynamic characteristics and mode shapes developed through the use of relatively dense arrays of accelerometers. Another widely utilized method of condition assessment is bridge load rating, which is enabled through the use of strain sensors. The Wireless Sensor Solution (WSS) developed specifically for diagnostic bridge monitoring provides a hybrid system that interfaces with both accelerometers and strain sensors to facilitate vibration-based bridge evaluation as well as load rating and static analysis on a universal platform. This paper presents the development and testing of a wireless bridge monitoring system designed within the Laboratory for Intelligent Infrastructure and Transportation Technologies (LIITT) at Clarkson University. The system interfaces with low-cost MEMS accelerometers using custom signal conditioning for amplification and filtering tailored to the spectrum of typical bridge vibrations, specifically from ambient excitation. Additionally, a signal conditioning and high resolution ADC interface is provided for strain gauge sensors. To permit compensation for the influence of temperature, thermistor-based temperature sensing is also enabled. In addition to the hardware description, this paper presents features of the software applications and host interface developed for flexible, user-friendly in-network control of and acquisition from the sensor nodes. The architecture of the software radio protocol is also discussed along with results of field deployments including relatively large-scale networks and

  8. Hybrid Machine Learning Technique for Forecasting Dhaka Stock Market Timing Decisions

    OpenAIRE

    Shipra Banik; Khodadad Khan, A. F. M.; Mohammad Anwer

    2014-01-01

    Forecasting stock market has been a difficult job for applied researchers owing to nature of facts which is very noisy and time varying. However, this hypothesis has been featured by several empirical experiential studies and a number of researchers have efficiently applied machine learning techniques to forecast stock market. This paper studied stock prediction for the use of investors. It is always true that investors typically obtain loss because of uncertain investment purposes and unsigh...

  9. A HYBRID TECHNIQUE FOR PAPR REDUCTION OF OFDM USING DHT PRECODING WITH PIECEWISE LINEAR COMPANDING

    Directory of Open Access Journals (Sweden)

    Thammana Ajay

    2016-06-01

    Full Text Available Orthogonal Frequency Division Multiplexing (OFDM is a fascinating approach for wireless communication applications which require huge amount of data rates. However, OFDM signal suffers from its large Peak-to-Average Power Ratio (PAPR, which results in significant distortion while passing through a nonlinear device, such as a transmitter high power amplifier (HPA. Due to this high PAPR, the complexity of HPA as well as DAC also increases. For the reduction of PAPR in OFDM many techniques are available. Among them companding is an attractive low complexity technique for the OFDM signal’s PAPR reduction. Recently, a piecewise linear companding technique is recommended aiming at minimizing companding distortion. In this paper, a collective piecewise linear companding approach with Discrete Hartley Transform (DHT method is expected to reduce peak-to-average of OFDM to a great extent. Simulation results shows that this new proposed method obtains significant PAPR reduction while maintaining improved performance in the Bit Error Rate (BER and Power Spectral Density (PSD compared to piecewise linear companding method.

  10. Well-defined functional mesoporous silica/polymer hybrids prepared by an ICAR ATRP technique integrated with bio-inspired polydopamine chemistry for lithium isotope separation.

    Science.gov (United States)

    Liu, Yuekun; Liu, Xuegang; Ye, Gang; Song, Yang; Liu, Fei; Huo, Xiaomei; Chen, Jing

    2017-05-09

    Mesoporous silica/polymer hybrids with well-preserved mesoporosity were prepared by integrating the initiators for continuous activator regeneration (ICAR) atom transfer radical polymerization (ATRP) technique with the bio-inspired polydopamine (PDA) chemistry. By manipulating the auto-oxidative polymerization of dopamine, uniform PDA layers were deposited on the surfaces and pore walls of ordered mesoporous silicas (OMSs), thereby promoting the immobilization of ATRP initiators. Poly(glycidyl methacrylate) (PGMA) brushes were then grown from the OMSs by using the ICAR ATRP technique. The evolution of the mesoporous silica/polymer hybrids during synthesis, in terms of morphology, structure, surface and porous properties, was detailed. And, parameters influencing the controlled growth of polymer chains in the ICAR ATRP system were studied. Taking advantage of the abundant epoxy groups in the PGMA platform, post-functionalization of the mesoporous silica/polymer hybrids by the covalent attachment of macrocyclic ligands for the adsorptive separation of lithium isotopes was realized. Adsorption behavior of the functionalized hybrids toward lithium ions was fully investigated, highlighting the good selectivity, and effects of temperature, solvent and counter ions. The ability for lithium isotope separation was evaluated. A higher separation factor could be obtained in systems with softer counter anions and lower polarity solvents. More importantly, due to the versatility of the ICAR ATRP technique, combined with the non-surface specific PDA chemistry, the methodology established in this work would provide new opportunities for the preparation of advanced organic-inorganic porous hybrids for broadened applications.

  11. A sixth order hybrid finite difference scheme based on the minimized dispersion and controllable dissipation technique

    Science.gov (United States)

    Sun, Zhen-sheng; Luo, Lei; Ren, Yu-xin; Zhang, Shi-ying

    2014-08-01

    The dispersion and dissipation properties of a scheme are of great importance for the simulation of flow fields which involve a broad range of length scales. In order to improve the spectral properties of the finite difference scheme, the authors have previously proposed the idea of optimizing the dispersion and dissipation properties separately and a fourth order scheme based on the minimized dispersion and controllable dissipation (MDCD) technique is thus constructed [29]. In the present paper, we further investigate this technique and extend it to a sixth order finite difference scheme to solve the Euler and Navier-Stokes equations. The dispersion properties of the scheme is firstly optimized by minimizing an elaborately designed integrated error function. Then the dispersion-dissipation condition which is newly derived by Hu and Adams [30] is introduced to supply sufficient dissipation to damp the unresolved wavenumbers. Furthermore, the optimized scheme is blended with an optimized Weighted Essentially Non-Oscillation (WENO) scheme to make it possible for the discontinuity-capturing. In this process, the approximation-dispersion-relation (ADR) approach is employed to optimize the spectral properties of the nonlinear scheme to yield the true wave propagation behavior of the finite difference scheme. Several benchmark test problems, which include broadband fluctuations and strong shock waves, are solved to validate the high-resolution, the good discontinuity-capturing capability and the high-efficiency of the proposed scheme.

  12. A Hybrid Approach for Detecting Suspicious Accounts in Money Laundering Using Data Mining Techniques

    Directory of Open Access Journals (Sweden)

    Ch. Suresh

    2016-05-01

    Full Text Available Money laundering is a criminal activity to disguise black money as white money. It is a process by which illegal funds and assets are converted into legitimate funds and assets. Money Laundering occurs in three stages: Placement, Layering, and Integration. It leads to various criminal activities like Political corruption, smuggling, financial frauds, etc. In India there is no successful Anti Money laundering techniques which are available. The Reserve Bank of India (RBI, has issued guidelines to identify the suspicious transactions and send it to Financial Intelligence Unit (FIU. FIU verifies if the transaction is actually suspicious or not. This process is time consuming and not suitable to identify the illegal transactions that occurs in the system. To overcome this problem we propose an efficient Anti Money Laundering technique which can able to identify the traversal path of the Laundered money using Hash based Association approach and successful in identifying agent and integrator in the layering stage of Money Laundering by Graph Theoretic Approach.

  13. Development and validation of a hybrid simulation technique for cone beam CT: application to an oral imaging system

    Science.gov (United States)

    Zhang, G.; Pauwels, R.; Marshall, N.; Shaheen, E.; Nuyts, J.; Jacobs, R.; Bosmans, H.

    2011-09-01

    This paper proposes a hybrid technique to simulate the complete chain of an oral cone beam computed tomography (CBCT) system for the study of both radiation dose and image quality. The model was developed around a 3D Accuitomo 170 unit (J Morita, Japan) with a tube potential range of 60-90 kV. The Monte Carlo technique was adopted to simulate the x-ray generation, filtration and collimation. Exact dimensions of the bow-tie filter were estimated iteratively using experimentally acquired flood images. Non-flat radiation fields for different exposure settings were mediated via 'phase spaces'. Primary projection images were obtained by ray tracing at discrete energies and were fused according to the two-dimensional energy modulation templates derived from the phase space. Coarse Monte Carlo simulations were performed for scatter projections and the resulting noisy images were smoothed by Richardson-Lucy fitting. Resolution and noise characteristics of the flat panel detector were included using the measured modulation transfer function (MTF) and the noise power spectrum (NPS), respectively. The Monte Carlo dose calculation was calibrated in terms of kerma free-in-air about the isocenter, using an ionization chamber, and was subsequently validated by comparison against the measured air kerma in water at various positions of a cylindrical water phantom. The resulting dose discrepancies were found <10% for most cases. Intensity profiles of the experimentally acquired and simulated projection images of the water phantom showed comparable fractional increase over the common area as changing from a small to a large field of view, suggesting that the scatter was accurately accounted. Image validation was conducted using two small phantoms and the built-in quality assurance protocol of the system. The reconstructed simulated images showed high resemblance on contrast resolution, noise appearance and artifact pattern in comparison to experimentally acquired images, with <5

  14. A novel technique to neutralize the Yawing moment due to asymmetric thrust in a hybrid buoyant aircraft

    Science.gov (United States)

    Haque, Anwar U.; Asrar, Waqar; Omar, Ashraf A.; Sulaeman, Erwin; J. S Ali, Mohamed

    2016-03-01

    Dorsal fin is used in swimming animals like shark for the generation of thrust as well as to meet the requirement of the lateral stability. In the case of aircraft, rudders are normally used for the said requirement. In the present work, this nature inspired idea is explored for its application to neutralize the unavoidable asymmetric thrust produced by the twin engines of a hybrid buoyant aircraft. First, the estimation of asymmetric thrust is obtained with the help of analytical techniques for maximum thrust condition at 4 degree angle of attack. The moment generated by it is utilized for the sizing of a dorsal fin which looks similar to a tapered wing and is placed aft of the center of gravity. Wind tunnel testing at subsonic speed is carried out to explore the design features of this rotatable dorsal fin. It is found that a small rotation of 5 degree can generate the required moment. However, such rotation requires a complete pneumatic/electro-mechanical system and an alternative of it is to use a cambered airfoil for the dorsal fin installed at fixed location. Such a flow controlling device can also be used as an antenna mast, which is commonly installed out the fuselage of the aircraft for communication purposes. Moreover, by incorporating this technique, a pilot doesn't have to put an extra effort to make the aircraft stable in the presence of side wind.

  15. Research on Theories and Techniques of Irrigation for Safeguarding Seed Production of Two-Line Hybrid Rice

    Institute of Scientific and Technical Information of China (English)

    ZOU Jiang-shi; L(U) Chuan-gen; YAO Ke-min; HU Ning; XIA Shi-jian

    2006-01-01

    By inducing frequency, intensity and duration of lower temperature in the middle and last ten-day periods in August in the rice-growing areas of southern China, increasing temperature for safe seed production was defined as 2℃. During the sensitive period of fertility, characters of panicle height and canopy structure of TGMS rice, Pei'ai64S, were measured.Results showed that temperature changes caused by irrigation in fields were below 40 cm of rice plant, and heating effect was significant at 20 cm when the temperature was increased by 3.1℃. For the present study, the following irrigation techniques were put forth: the water depth of 15-20 cm, current water used, irrigating after 17:00 and bailing at 10:00 in sunny or cloudy weather, irrigating on whole day, in shady or rainy weather, increasing inflows and outflows in large fields. In the present experiment, pollen fertility and self-fertilized seed setting rate accepted that the techniques were feasible and effective for against lower temperature and safeguarding seed production of two-line hybrid rice.

  16. A novel technique to neutralize the Yawing moment due to asymmetric thrust in a hybrid buoyant aircraft

    Directory of Open Access Journals (Sweden)

    Haque Anwar U

    2016-01-01

    Full Text Available Dorsal fin is used in swimming animals like shark for the generation of thrust as well as to meet the requirement of the lateral stability. In the case of aircraft, rudders are normally used for the said requirement. In the present work, this nature inspired idea is explored for its application to neutralize the unavoidable asymmetric thrust produced by the twin engines of a hybrid buoyant aircraft. First, the estimation of asymmetric thrust is obtained with the help of analytical techniques for maximum thrust condition at 4 degree angle of attack. The moment generated by it is utilized for the sizing of a dorsal fin which looks similar to a tapered wing and is placed aft of the center of gravity. Wind tunnel testing at subsonic speed is carried out to explore the design features of this rotatable dorsal fin. It is found that a small rotation of 5 degree can generate the required moment. However, such rotation requires a complete pneumatic/electro-mechanical system and an alternative of it is to use a cambered airfoil for the dorsal fin installed at fixed location. Such a flow controlling device can also be used as an antenna mast, which is commonly installed out the fuselage of the aircraft for communication purposes. Moreover, by incorporating this technique, a pilot doesn’t have to put an extra effort to make the aircraft stable in the presence of side wind.

  17. Optimizing an Industrial Scale Naphtha Catalytic Reforming Plant Using a Hybrid Artificial Neural Network and Genetic Algorithm Technique

    Directory of Open Access Journals (Sweden)

    Sepehr Sadighi

    2015-07-01

    Full Text Available In this paper, a hybrid model for estimating the activity of a commercial Pt-Re/Al2O3 catalyst in an industrial scale heavy naphtha catalytic-reforming unit (CRU is presented. This model is also capable of predicting research octane number (RON and yield of gasoline. In the proposed model, called DANN, the decay function of heterogeneous catalysts is combined with a recurrent-layer artificial neural network. During a life cycle (919 days, fifty-eight points are selected for building and training the DANN (60%, nineteen data points for testing (20%, and the remained ones for validating steps. Results show that DANN can acceptably estimate the activity of catalyst during its life in consideration of all process variables. Moreover, it is confirmed that the proposed model is capable of predicting RON and yield of gasoline for unseen (validating data with AAD% (average absolute deviation of 0.272% and 0.755%, respectively. After validating the model, the octane barrel level (OCB of the plant is maximized by manipulating the inlet temperature of reactors, and hydrogen to hydrocarbon molar ratio whilst all process limitations are taken into account. During a complete life cycle results show that the decision variables, generated by the optimization program, can increase the RON, process yield and OCB of CRU to about 1.15%, 3.21%, and 4.56%, respectively. © 2015 BCREC UNDIP. All rights reserved.Received: 27th July 2014; Revised: 31st May 2015; Accepted: 31th May 2015 How to Cite: Sadighi, S., Mohaddecy, R.S., Norouzian, A. (2015. Optimizing an Industrial Scale Naphtha Catalytic Reforming Plant Using a Hybrid Artificial Neural Network and Genetic Algorithm Technique. Bulletin of Chemical Reaction Engineering & Catalysis, 10(2: 210-220. (doi:10.9767/bcrec.10.2.7171.210-220 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.2.7171.210-220  

  18. Recent advances in knowledge-based paradigms and applications enhanced applications using hybrid artificial intelligence techniques

    CERN Document Server

    Jain, Lakhmi

    2014-01-01

    This book presents carefully selected contributions devoted to the modern perspective of AI research and innovation. This collection covers several areas of applications and motivates new research directions. The theme across all chapters combines several domains of AI research , Computational Intelligence and Machine Intelligence including an introduction to  the recent research and models. Each of the subsequent chapters reveals leading edge research and innovative solution that employ AI techniques with an applied perspective. The problems include classification of spatial images, early smoke detection in outdoor space from video images, emergent segmentation from image analysis, intensity modification in images, multi-agent modeling and analysis of stress. They all are novel pieces of work and demonstrate how AI research contributes to solutions for difficult real world problems that benefit the research community, industry and society.

  19. Rapid full Mueller matrix imaging polarimetry based on the hybrid phase modulation technique

    Science.gov (United States)

    Han, Chien-Yuan; Du, Cheng-You; Jhou, Jhe-Yi

    2017-01-01

    In this work, we present a novel method of Mueller matrix imaging polarimetry, which comprises dual liquid crystal variable retarders at the polarization generation portion and a photoelastic modulator at the polarization analysis portion. The light source can be operated either in the continuous mode, which provides an in-situ calibration process for the liquid crystal variable retarders, or in the pulse mode to deduce the full two-dimensional Mueller matrix with 16 images from the camera. We measured the Mueller matrix images of air as a standard test, as well as a quarter wave plate to determine its azimuthal angle and phase retardation by the polar decomposition technique. Finally, the decomposed Mueller matrix images of a biopolymer specimen with the conformational change produced by heat treatment are presented.

  20. MULTILEVEL APPROACH OF CBIR TECHNIQUES FOR VEGETABLE CLASSIFICATION USING HYBRID IMAGE FEATURES

    Directory of Open Access Journals (Sweden)

    D. Latha

    2016-02-01

    Full Text Available CBIR is a technique to retrieve images semantically relevant to query image from an image database. The challenge in CBIR is to develop a method that should increase the retrieval accuracy and reduce the retrieval time. In order to improve the retrieval accuracy and runtime, a multilevel CBIR approach is proposed in this paper. In the first level, the color attributes like mean and standard deviations are proposed to calculate on HSV color space to retrieve the images with minimum disparity distance from the database. In order to minimize search area, in the second level Local Ternary Pattern is proposed on images which were selected from the first level. Experimental results and comparisons demonstrate the superiority of the proposed approach.

  1. A Hybrid Model for the Mid-Long Term Runoff Forecasting by Evolutionary Computaion Techniques

    Institute of Scientific and Technical Information of China (English)

    Zou Xiu-fen; Kang Li-shan; Cae Hong-qing; Wu Zhi-jian

    2003-01-01

    The mid-long term hydrology forecasting is one of most challenging problems in hydrological studies. This paper proposes an efficient dynamical system prediction model using evolutionary computation techniques. The new model overcomes some disadvantages of conventional hydrology fore casting ones. The observed data is divided into two parts: the slow "smooth and steady" data, and the fast "coarse and fluctuation" data. Under the divide and conquer strategy, the behavior of smooth data is modeled by ordinary differential equations based on evolutionary modeling, and that of the coarse data is modeled using gray correlative forecasting method. Our model is verified on the test data of the mid-long term hydrology forecast in tbe northeast region of China. The experimental results show that the model is superior to gray system prediction model (GSPM).

  2. Integrating Internet Video Conferencing Techniques and Online Delivery Systems with Hybrid Classes to Enhance Student Interaction and Learning in Accelerated Programs

    Science.gov (United States)

    Beckwith, E. George; Cunniff, Daniel T.

    2009-01-01

    Online course enrollment has increased dramatically over the past few years. The authors cite the reasons for this rapid growth and the opportunities open for enhancing teaching/learning techniques such as video conferencing and hybrid class combinations. The authors outlined an example of an accelerated learning, eight-class session course…

  3. Fabrication of 2×2 Thermo-Optic Switches with Organic-Inorganic Hybrid Materials Prepared by Sol-Gel Technique

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    2×2 Mach-Zehnder interferometric thermo-optic switch was fabricated with organic/inorganic hybrid materials by sol-gel technique and direct UV patterning. The switching time of device was measured to be 4.2 ms and switching power 9.3 mW.

  4. Contrast-Enhanced MR Angiography (CEMRA) in Peripheral Arterial Occlusive Disease (PAOD): conventional moving table technique versus hybrid technique; Kontrastverstaerkte MR-Angiographie (CEMRA) bei peripherer AVK (pAVK): konventionelle Tischverschiebetechnik versus Hybrid-Technik

    Energy Technology Data Exchange (ETDEWEB)

    Kalle, T. von; Gerlach, A.; Hatopp, A.; Klinger, S.; Prodehl, P.; Arlat, I.P. [Katharinenhospital, Stuttgart (Germany). Radiologisches Inst.

    2004-01-01

    Patients and Methods: 80 patients (males n = 60, females n = 20, median age = 70 years, diabetics n = 27) with PAOD were examined with a 1,5T system (40 mT/m) using a dedicated phased array peripheral vascular coil. Protocol A consisted of a single injection of Gd-BOPTA with consecutive craniocaudal image acquisition and protocol B of two injections, with the first injection of Gd-BOPTA followed by image acquisition of the popliteocrural and pedal segments and the second injection followed by acquiring the aortoiliac and femoral segments (hybrid technique). The evaluation of the arterial system was directed to the iliac, femoral, popliteocrural and pedal arteries. Results: The visualization of the entire aortopedal vascular system was of diagnostically good or satisfactory quality in 16 of 40 patients using protocol A and in 29 of 40 patients using protocol B (iliac 40 vs. 37, femoral 40 vs. 40, popliteocrural 35 vs. 37, pedal 16 vs. 29); without the pedal station the number increased to 35 of 40 patients for both protocols. The reason of diagnostic limitations was an arteriovenous overlap in 24 of 80 cases, with 19 of 40 cases for protocol A and 5 of 40 for protocol B, located exclusively in the cruropedal region. Conclusion: Moving table hybrid CEMRA is superior to conventional technique in craniocaudal direction by producing less venous overlap of arteries and is especially more suitable for the diagnostic evaluation of the cruropedal region. (orig.) [German] Patienten und Methodik: Untersucht wurden 80 Patienten (maennl. n = 60, weibl. n = 20, mittl. Alter 70 J., Diabetiker n = 27) mit pAVK an einem 1,5-Tesla-Geraet (40 mT/m) mit dedizierter Phased-Array-Oberflaechen-Gefaessspule. Protokoll A beinhaltete eine Kontrastmittel-Injektion (Gd-BOPTA) mit konsekutiver kraniokaudaler Bildakquisition. In Protokoll B erfolgte die Akquisition zunaechst der Unterschenkel- und Fussetage mittels einer ersten, anschliessend der Abdomen-Becken- und Oberschenkeletage mittels

  5. A hybrid stock trading framework integrating technical analysis with machine learning techniques

    Directory of Open Access Journals (Sweden)

    Rajashree Dash

    2016-03-01

    Full Text Available In this paper, a novel decision support system using a computational efficient functional link artificial neural network (CEFLANN and a set of rules is proposed to generate the trading decisions more effectively. Here the problem of stock trading decision prediction is articulated as a classification problem with three class values representing the buy, hold and sell signals. The CEFLANN network used in the decision support system produces a set of continuous trading signals within the range 0–1 by analyzing the nonlinear relationship exists between few popular technical indicators. Further the output trading signals are used to track the trend and to produce the trading decision based on that trend using some trading rules. The novelty of the approach is to engender the profitable stock trading decision points through integration of the learning ability of CEFLANN neural network with the technical analysis rules. For assessing the potential use of the proposed method, the model performance is also compared with some other machine learning techniques such as Support Vector Machine (SVM, Naive Bayesian model, K nearest neighbor model (KNN and Decision Tree (DT model.

  6. A Hybrid Technique for Real Time License Plate Localization with the aid of FFBPNNAPSO

    Directory of Open Access Journals (Sweden)

    Reji PI

    2016-04-01

    Full Text Available Vehicle License Plate Recognition (VLPR is an imperative constituent in Intelligent Transportation Systems (ITS, which encircles three foremost phases essentially License Plate Localization (LPL, Character Segmentation (CS, Character Recognition (CR. In this paper, we have intended to introduce a novel License Plate Localization algorithm subjected to Artificial Neural Networks (ANN. This proposed scheme involves distinct phases of pre-processing, image de-noising and enhancement, feature extraction, Neural Network training and License Plate detection. Followed by the mining of assorted statistical features, geometrical features, edge features and texture features from the vehicular image, they are given as the input to Feed Forward Back Propagation Neural Network (FFBPNN in order to localize the License Plate. During the training process, the parameters of the FFBPNN will be optimized using the eminent Adaptive Particle Swarm Optimization (APSO algorithm in order to improve the Neural Network convergence performance. The License Plate Localization of our proposed technique is analyzed with simple Feed Forward Back propagation Neural Network (FFBPNN in terms of accuracy, sensitivity and specificity. The experimental outcomes demonstrate that the proposed procedure proficiently accomplishes an extremely high localization rate with elevated specificity (91.3%.

  7. Flexible Riser Monitoring Using Hybrid Magnetic/Optical Strain Gage Techniques through RLS Adaptive Filtering

    Directory of Open Access Journals (Sweden)

    Pipa Daniel

    2010-01-01

    Full Text Available Flexible riser is a class of flexible pipes which is used to connect subsea pipelines to floating offshore installations, such as FPSOs (floating production/storage/off-loading unit and SS (semisubmersible platforms, in oil and gas production. Flexible risers are multilayered pipes typically comprising an inner flexible metal carcass surrounded by polymer layers and spiral wound steel ligaments, also referred to as armor wires. Since these armor wires are made of steel, their magnetic properties are sensitive to the stress they are subjected to. By measuring their magnetic properties in a nonintrusive manner, it is possible to compare the stress in the armor wires, thus allowing the identification of damaged ones. However, one encounters several sources of noise when measuring electromagnetic properties contactlessly, such as movement between specimen and probe, and magnetic noise. This paper describes the development of a new technique for automatic monitoring of armor layers of flexible risers. The proposed approach aims to minimize these current uncertainties by combining electromagnetic measurements with optical strain gage data through a recursive least squares (RLSs adaptive filter.

  8. Heart dose reduction in breast cancer treatment with simultaneous integrated boost. Comparison of treatment planning and dosimetry for a novel hybrid technique and 3D-CRT

    Energy Technology Data Exchange (ETDEWEB)

    Joest, Vincent; Kretschmer, Matthias; Sabatino, Marcello; Wuerschmidt, Florian; Dahle, Joerg; Lorenzen, Joern [Radiological Alliance, Hamburg (Germany); Ueberle, Friedrich [University of Applied Sciences, Faculty Life Sciences, Hamburg (Germany)

    2015-09-15

    The present study compares in silico treatment plans of clinically established three-dimensional conformal radiotherapy (3D-CRT) with a hybrid technique consisting of intensity-modulated radiotherapy (IMRT) and volumetric modulated arc radiotherapy (VMAT) during normally fractionated radiation of mammary carcinomas with simultaneous integrated boost on the basis of dose-volume histogram (DVH) parameters. Radiation treatment planning was performed with a hybrid and a 3D-CRT treatment plan for 20 patients. Hybrid plans were implemented with two tangential IMRT fields and a VMAT field in the angular range of the tangents. Verification of the plan was performed with a manufacturer-independent measurement system consisting of a detector array and rotation unit. The mean values of the heart dose for the entire patient collective were 3.6 ± 2.5 Gy for 3D-CRT and 2.9 ± 2.1 Gy for the hybrid technique (p < 0.01). For the left side (n = 10), the mean values for the left anterior descending artery were 21.8 ± 7.4 Gy for 3D-CRT and 17.6 ± 7.4 Gy for the hybrid technique (p < 0.01). The mean values of the ipsilateral lung were 11.9 ± 1.6 Gy for 3D-CRT and 10.5 ± 1.3 Gy for the hybrid technique (p < 0.01). Calculated dose distributions in the hybrid arm were in good accordance with measured dose (on average 95.6 ± 0.5 % for γ < 1 and 3 %/3 mm). The difference of the mean treatment time per fraction was 7 s in favor of 3D-CRT. Compared with the established 3D-CRT technique, the hybrid technique allows for a decrease in dose, particularly of the mean heart and lung dose with comparable target volume acquisition and without disadvantageous low-dose load of contralateral structures. Uncomplicated implementation of the hybrid technique was demonstrated in this context. The hybrid technique combines the advantages of tangential IMRT with the superior sparing of organs at risk by VMAT. (orig.) [German] Die vorliegende Studie vergleicht ''in silico

  9. Chitosan-pectin hybrid nanoparticles prepared by coating and blending techniques.

    Science.gov (United States)

    Rampino, A; Borgogna, M; Bellich, B; Blasi, P; Virgilio, F; Cesàro, A

    2016-03-10

    The preparation of chitosan nanoparticles in combination with pectins, as additional mucoadhesive biopolymers, was investigated. Pectins from apple and from citrus fruit were considered; polygalacturonic acid was taken as a reference. Tripolyphosphate was used as an anionic cross-linker. Two different techniques were compared, namely the coating and the blending. Coated nanoparticles (NPs) in the ratio pectin:NPs from 2:1 to 5:1 evidenced that the size of NPs increased as the amount of pectin (both from apple and citrus fruit) was increased. In particular, for NPs coated with pectin from citrus fruit the size ranges from 200 to 260nm; while for NPs coated with pectin from apple the size ranges from 330 to 450nm. A minimum value of Z-potential around -35mV was obtained for the ratio pectin:NPs 4:1, while further addition of pectin did not decrease the Z-potential. Also blended NPs showed a dependence of the size on the ratio of the components: for a given ratio pectin:tripolyphosphate the size increases as the fraction of chitosan increases; for a low ratio chitosan:pectin a high amount of tripolyphosphate was needed to obtain a compact structure. The effect of the additional presence of loaded proteins in chitosan-pectin nanoparticles was also investigated, since proteins contribute to alter the electrostatic interactions among charged species. FT-IR and DSC characterization are presented to confirm the interactions between biopolymers. Finally, the biocompatibility of the used materials was assessed by the chorioallantoic membrane assay, confirming the safety of the materials.

  10. Hybrid approach combining multiple characterization techniques and simulations for microstructural analysis of proton exchange membrane fuel cell electrodes

    Science.gov (United States)

    Cetinbas, Firat C.; Ahluwalia, Rajesh K.; Kariuki, Nancy; De Andrade, Vincent; Fongalland, Dash; Smith, Linda; Sharman, Jonathan; Ferreira, Paulo; Rasouli, Somaye; Myers, Deborah J.

    2017-03-01

    The cost and performance of proton exchange membrane fuel cells strongly depend on the cathode electrode due to usage of expensive platinum (Pt) group metal catalyst and sluggish reaction kinetics. Development of low Pt content high performance cathodes requires comprehensive understanding of the electrode microstructure. In this study, a new approach is presented to characterize the detailed cathode electrode microstructure from nm to μm length scales by combining information from different experimental techniques. In this context, nano-scale X-ray computed tomography (nano-CT) is performed to extract the secondary pore space of the electrode. Transmission electron microscopy (TEM) is employed to determine primary C particle and Pt particle size distributions. X-ray scattering, with its ability to provide size distributions of orders of magnitude more particles than TEM, is used to confirm the TEM-determined size distributions. The number of primary pores that cannot be resolved by nano-CT is approximated using mercury intrusion porosimetry. An algorithm is developed to incorporate all these experimental data in one geometric representation. Upon validation of pore size distribution against gas adsorption and mercury intrusion porosimetry data, reconstructed ionomer size distribution is reported. In addition, transport related characteristics and effective properties are computed by performing simulations on the hybrid microstructure.

  11. Recovery and reuse of hexavalent chromium from aqueous solutions by a hybrid technique of electrodialysis and ion exchange

    Energy Technology Data Exchange (ETDEWEB)

    Gayathri, R. [Sengunthar Engineering College, Tiruchengode (India). Dept. of Civil Engineering], e-mail: gay3civil@gmail.com; Senthil Kumar, P. [SSN College of Engineering, Chennai (India). Dept. of Chemical Engineering], E-mail: senthilkumarp@ssn.edu.in

    2010-01-15

    The chrome plating industry is one of the highly polluting industries whose effluent mainly consists of chromium(VI). This compound is highly toxic to aquatic life and human health. The rinse water constituents reflect the chrome plating bath characteristics; generally dead tank wash water contains about 1% of the plating bath concentration. Other metals and metal compounds usually considered as toxic can be precipitated out by suitably adjusting the pH of the wastewaters. However, Cr(VI) is soluble in almost all pH ranges and therefore an efficient treatment is required for the removal and recovery of chromium, and also for the reuse of wastewaters. The present study aims to recover the chromium by a hybrid technique of electrodialysis and ion exchange for the removal and concentration of chromate ions from the effluent. The different modes of operation like batch recirculation process, batch recirculation process with continuous dipping and continuous process were carried out to remove and recover the chromium from the effluent and the percentage reductions of chromium were found to be 98.69%, 99.18% and 100%, respectively. (author)

  12. A hybrid experimental-numerical technique for determining 3D velocity fields from planar 2D PIV data

    Science.gov (United States)

    Eden, A.; Sigurdson, M.; Mezić, I.; Meinhart, C. D.

    2016-09-01

    Knowledge of 3D, three component velocity fields is central to the understanding and development of effective microfluidic devices for lab-on-chip mixing applications. In this paper we present a hybrid experimental-numerical method for the generation of 3D flow information from 2D particle image velocimetry (PIV) experimental data and finite element simulations of an alternating current electrothermal (ACET) micromixer. A numerical least-squares optimization algorithm is applied to a theory-based 3D multiphysics simulation in conjunction with 2D PIV data to generate an improved estimation of the steady state velocity field. This 3D velocity field can be used to assess mixing phenomena more accurately than would be possible through simulation alone. Our technique can also be used to estimate uncertain quantities in experimental situations by fitting the gathered field data to a simulated physical model. The optimization algorithm reduced the root-mean-squared difference between the experimental and simulated velocity fields in the target region by more than a factor of 4, resulting in an average error less than 12% of the average velocity magnitude.

  13. Degradation of Tectilon Yellow 2G by hybrid technique: combination of sonolysis and biodegradation using mutant Pseudomonas putida.

    Science.gov (United States)

    Srinivasan, Raman; Kathiravan, Mathur Nadarajan; Gopinath, Kannappan Panchamoorthy

    2011-02-01

    Degradation of Tectilon Yellow 2G (TY2G), an azo dye has been studied by hybrid technique involving pretreatment by sonochemical method and further biological treatment by Pseudomonas putida mutant. Pretreatment experiments were carried out by sonolysis of the dye solution at different concentrations (100-1000 mg/L). Wild type Gram-negative P. putida species isolated from the textile effluent contaminated soil, which was found to be effective towards dye degradation, has been acclimatized so as to consume TY2G as the sole source of nutrition. Mutant strain was obtained from the acclimatized species by random mutagenesis using the chemical mutagen ethidium bromide for various time intervals (6-30 min). The optimum mutagenesis exposure time for obtaining the most efficient species for dye degradation was found to be 18 min. An efficient mutant strain P. putida ACT 1 has been isolated and was used for growth experiments. The mutant strain showed a better growth compared to the wild strain. The substrate utilization kinetics has been modeled using Monod and Haldane model equations of which the Haldane model provided a better fit. The enzyme kinetics of the mutant and wild species was obtained using Michaelis-Menten equation. The mutated species showed better enzyme kinetics towards the degradation of TY2G.

  14. Hybrid evolutionary techniques in feed forward neural network with distributed error for classification of handwritten Hindi `SWARS'

    Science.gov (United States)

    Kumar, Somesh; Pratap Singh, Manu; Goel, Rajkumar; Lavania, Rajesh

    2013-12-01

    In this work, the performance of feedforward neural network with a descent gradient of distributed error and the genetic algorithm (GA) is evaluated for the recognition of handwritten 'SWARS' of Hindi curve script. The performance index for the feedforward multilayer neural networks is considered here with distributed instantaneous unknown error i.e. different error for different layers. The objective of the GA is to make the search process more efficient to determine the optimal weight vectors from the population. The GA is applied with the distributed error. The fitness function of the GA is considered as the mean of square distributed error that is different for each layer. Hence the convergence is obtained only when the minimum of different errors is determined. It has been analysed that the proposed method of a descent gradient of distributed error with the GA known as hybrid distributed evolutionary technique for the multilayer feed forward neural performs better in terms of accuracy, epochs and the number of optimal solutions for the given training and test pattern sets of the pattern recognition problem.

  15. Heat Treatment Parameters to Optimize Friction and Wear behavior of Novel Hybrid Aluminium Composites Using Taguchi Technique

    Directory of Open Access Journals (Sweden)

    V.C.Uvaraja

    2014-05-01

    Full Text Available In the present study, an Al 7075 alloy is used as the matrix and varying weight percentage of Silicon Carbide (SiC and constant weight percentage of Boron Carbide (B4C as the reinforcing material. The composite is produced using stir casting technique. The composite thus formed is termed as hybrid composite. The samples are prepared for heat treatment process by subjecting to solutionizing temperature of 530o C for 1 hr followed by quenching in water. Further the specimens are subjected to artificial aging for durations of 4, 6 and 8 hr at a temperature of 175°C. The mechanical and tribological properties of composites before and after heat treatment are examined by Vickers hardness test machine and pin-on-disc test machine respectively. The wear rate and friction co-efficient of heat treatment parameters are evaluated based on Taguchi technique. The analysis is further extended to the optimization of test parameters using Design of Experiment (DoE based on L9 orthogonal array. The developed Analysis of Variance (ANOVA and the regression equations is obtained through MINITAB R16 are used to investigate the influence of parameters like sliding speed, applied load, sliding time, and percentage of reinforcement on the dry sliding wear and friction co-efficient of the composites. The wear surface morphology and wear mechanism of the pins are investigated using Scanning Electron Microscope (SEM and are correlated them with wear test results. Finally, confirmation tests are carried out to verify the experimental results.

  16. The application of fluorescence in situ hybridization (FISH technique for studying the microbial communities in intestinal tissues of white shrimp (Penaeus vannamei

    Directory of Open Access Journals (Sweden)

    Supamattaya, K.

    2005-02-01

    Full Text Available Fluorescence in situ hybridization technique is very useful for the evaluation of microbial communities in various environments. It is possible to apply this technique to study the intestinal microflora in white shrimp (Penaeus vannamei. Different fixatives and storage temperature were tested in this technique. It was found that fixation with 10% buffered formalin for 12 hours and changed to 70% ethanol shown positive results when compared to the fixation with Davidson's fixative or RF fixative. The best signaling was obtainedfrom the samples which were stored in -20ºC. By using the DNA probe targeted to the Eubacteria domain (EUB338 probe, 5′-GCT GCC TCC CGT AGG AGT-3′ labeled with fluorescein as a hybridizing probe, it was found that most intestinal microflora were aggregated with the intestinal contents, or dispersed in the lumen. There was not evidence of the attachment of the microflora with the intestinal epithelium in this study.

  17. Influence of the polymer amount on bioactivity and biocompatibility of SiO{sub 2}/PEG hybrid materials synthesized by sol–gel technique

    Energy Technology Data Exchange (ETDEWEB)

    Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, F.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Gallicchio, M.; Pacifico, S. [Department of Environmental Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

    2015-03-01

    SiO{sub 2}/PEG organic–inorganic hybrid materials, which differ in polyethylene glycol (PEG) content, were synthesized by sol–gel technique and the characterization of their structure and biological properties was carried out in order to evaluate the possible use in biomedical field. FT-IR spectroscopy detected that the two components of the hybrids (SiO{sub 2} and PEG) are linked by hydrogen bonds between the Si–OH groups of the inorganic phase and the terminal alcoholic groups and/or the ethereal oxygen atoms in the repeating units of polymer. X-ray diffraction analysis ascertained the amorphous nature of the gels and the observation of their morphology by SEM microscopy confirmed that the interpenetration of the two phases (organic and inorganic) occurs on nanometric scale. The biological characterization was carried out as a function of the polymer amount to study its influence on material behavior. The results showed that the synthesized materials were bioactive and biocompatible. The formation of a hydroxyapatite layer, indeed, was observed on their surface by SEM/EDX analysis after soaking in simulated body fluid. Moreover, the biocompatibility of SiO{sub 2}/PEG hybrids was assessed performing MTT and SRB cytotoxicity tests on fibroblast cell NIH 3T3 after 24 and 48 h of exposure, as well as Trypan Blue dye exclusion test. The response to the presence of the investigated materials was positive. The cell growth and proliferation showed dependence on polymer amount and time of exposure to the material extracts. Therefore, the obtained results are encouraging for the use of the obtained hybrids in dental or orthopedic applications. - Highlights: • SiO{sub 2}/PEG hybrid biomaterials synthesized by sol–gel method at various PEG percentages • Chemical and morphological characterization of hybrid materials • Chemical interactions between inorganic and organic components • Biological characterizations with MTT and SRB cytotoxicity tests

  18. Hybrid-SAR Technique: Joint Analysis Using Phase-Based and Amplitude-Based Methods for the Xishancun Giant Landslide Monitoring

    Directory of Open Access Journals (Sweden)

    Tengteng Qu

    2016-10-01

    Full Text Available Early detection and early warning are of great importance in giant landslide monitoring because of the unexpectedness and concealed nature of large-scale landslides. In China, the western mountainous areas are prone to landslides and feature many giant complex landslides, especially following the Wenchuan Earthquake in 2008. This work concentrates on a new technique, known as the “hybrid-SAR technique”, that combines both phase-based and amplitude-based methods to detect and monitor large-scale landslides in Li County, Sichuan Province, southwestern China. This work aims to develop a robust methodological approach to promptly identify diverse landslides with different deformation magnitudes, sliding modes and slope geometries, even when the available satellite data are limited. The phase-based and amplitude-based techniques are used to obtain the landslide displacements from six TerraSAR-X Stripmap descending scenes acquired from November 2014 to March 2015. Furthermore, the application circumstances and influence factors of hybrid-SAR are evaluated according to four aspects: (1 quality of terrain visibility to the radar sensor; (2 landslide deformation magnitude and different sliding mode; (3 impact of dense vegetation cover; and (4 sliding direction sensitivity. The results achieved from hybrid-SAR are consistent with in situ measurements. This new hybrid-SAR technique for complex giant landslide research successfully identified representative movement areas, e.g., an extremely slow earthflow and a creeping region with a displacement rate of 1 cm per month and a typical rotational slide with a displacement rate of 2–3 cm per month downwards and towards the riverbank. Hybrid-SAR allows for a comprehensive and preliminary identification of areas with significant movement and provides reliable data support for the forecasting and monitoring of landslides.

  19. Assessment of fusion facility dose rate map using mesh adaptivity enhancements of hybrid Monte Carlo/deterministic techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, Ahmad M., E-mail: ibrahimam@ornl.gov [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Wilson, Paul P. [University of Wisconsin-Madison, 1500 Engineering Dr., Madison, WI 53706 (United States); Sawan, Mohamed E., E-mail: sawan@engr.wisc.edu [University of Wisconsin-Madison, 1500 Engineering Dr., Madison, WI 53706 (United States); Mosher, Scott W.; Peplow, Douglas E.; Grove, Robert E. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States)

    2014-10-15

    Highlights: •Calculate the prompt dose rate everywhere throughout the entire fusion energy facility. •Utilize FW-CADIS to accurately perform difficult neutronics calculations for fusion energy systems. •Develop three mesh adaptivity algorithms to enhance FW-CADIS efficiency in fusion-neutronics calculations. -- Abstract: Three mesh adaptivity algorithms were developed to facilitate and expedite the use of the CADIS and FW-CADIS hybrid Monte Carlo/deterministic techniques in accurate full-scale neutronics simulations of fusion energy systems with immense sizes and complicated geometries. First, a macromaterial approach enhances the fidelity of the deterministic models without changing the mesh. Second, a deterministic mesh refinement algorithm generates meshes that capture as much geometric detail as possible without exceeding a specified maximum number of mesh elements. Finally, a weight window coarsening algorithm decouples the weight window mesh and energy bins from the mesh and energy group structure of the deterministic calculations in order to remove the memory constraint of the weight window map from the deterministic mesh resolution. The three algorithms were used to enhance an FW-CADIS calculation of the prompt dose rate throughout the ITER experimental facility and resulted in a 23.3% increase in the number of mesh tally elements in which the dose rates were calculated in a 10-day Monte Carlo calculation. Additionally, because of the significant increase in the efficiency of FW-CADIS simulations, the three algorithms enabled this difficult calculation to be accurately solved on a regular computer cluster, eliminating the need for a world-class super computer.

  20. Analysis, control and optimal operations in hybrid power systems advanced techniques and applications for linear and nonlinear systems

    CERN Document Server

    Bizon, Nicu; Mahdavi Tabatabaei, Naser

    2014-01-01

    This book explains and analyzes the dynamic performance of linear and nonlinear systems, particularly for Power Systems including Hybrid Power Sources. Offers a detailed description of system stability using state space energy conservation principle, and more.

  1. TiO{sub 2}/PCL hybrid materials synthesized via sol–gel technique for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, F.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Marciano, S.; Pacifico, S. [Department Environmental, Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

    2015-02-01

    The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol–gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between Ti-OH groups in the sol–gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48 h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells. - Highlights: • TiO{sub 2}/PCL hybrids were obtained by the sol–gel process for biomedical applications. • Synthesized materials were found to be first-class hybrid nanocomposites. • Hybrids appear to be bioactive, a fundamental characteristic for osseointegration. • MTT and Trypan Blue viability test show that the materials are biocompatible. • The organic phase is able to modulate the biocompatibility of the materials.

  2. Investigation of kinetics and thermodynamics of DNA hybridization by means of 2-D fluorescence spectroscopy and soft/hard modeling techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ebrahimi, Sara; Kompany-Zareh, Mohsen, E-mail: kmpz@dr.com

    2016-02-04

    Reversible hybridization reaction plays a key role in fundamental biological processes, in many laboratory techniques, and also in DNA based sensing devices. Comprehensive investigation of this process is, therefore, essential for the development of more sophisticated applications. Kinetics and thermodynamics of the hybridization reaction, as a second order process, are systematically investigated with the aid of the soft and hard chemometric methods. Labeling two complementary 21 mer DNA single strands with FAM and Texas red fluorophores, enabled recording of the florescence excitation−emission matrices during the experiments which led to three-way data sets. The presence of fluorescence resonance energy transfer in excitation and emission modes and the closure in concentration mode, made the three-way data arrays rank deficient. To acquire primary chemical information, restricted Tucker3 as a soft method was employed. Herein a model-based method, hard restricted trilinear decomposition, is introduced for in depth analysis of rank deficient three-way data sets. By employing proposed hard method, the nonlinear model parameters as well as the correct profiles could be estimated. In addition, a simple constraint is presented to extract chemically reasonable output profiles regarding the core elements of restricted Tucker3 model. - Highlights: • Hard restricted trilinear decomposition (HrTD) was introduced for model-based analysis of three-way rank deficient data. • DNA hybridization was investigated by two-dimensional fluorescence spectroscopy and soft/hard multi-way techniques. • Restricted Tucker3 analysis enabled accurate estimation of pure FRET profiles in the hybridized form. • HrTD was successfully employed to estimate kinetic and equilibrium parameters of DNA hybridization system. • The performance of the proposed methods in response to different physical stimuli was successfully evaluated.

  3. Coupling physical chemical techniques with hydrotalcite-like compounds to exploit their structural features and new multifunctional hybrids with luminescent properties.

    Science.gov (United States)

    Costantino, Umberto; Costantino, Ferdinando; Elisei, Fausto; Latterini, Loredana; Nocchetti, Morena

    2013-08-28

    Hydrotalcite-like compounds (HTlc), belonging to the large class of Layered Double Hydroxides (LDH), have excited wide interest owing to the incredible number of their potential and achieved applications in physical, chemical and bio-chemical fields. This perspective review deals with recent advances in the application of physical-chemical techniques for the study of HTlc structure and for the design and synthesis, using intercalation chemistry routes, of new hybrid materials. Firstly, a rapid survey on the most common synthetic strategies for the attainment of HTlc with different crystallinity degree and crystal size and for their modification to obtain hybrids has been made, and the use of coupled techniques (XRPD, luminescence, Solid State MAS NMR and Molecular Dynamics) to gain structural information is reported. Then, the design, synthesis and photophysical characterization of azoic dyes-intercalated and co-intercalated HTlc hybrid materials are described. Hybrids constituted of ZnAl-HTlc, co-intercalated with stearate anions and methyl orange or methyl yellow dyes, have been used as nanofillers of hydrophobic polymers. The polymeric nano-composites obtained have been characterized by means of XRPD patterns, Thermo-Gravimetric Analysis and Confocal Fluorescence Microscopy. This latter technique has been found to be an excellent, complementary and non-invasive tool to probe the dispersion degree of the fluorescent fillers into the polymeric matrices and their stability in the compounding process. Finally, the synthesis and spectroscopic characterization of nanoparticle (NP) decorated HTlc for advanced antimicrobial and photo-catalytic applications are also reported. The review terminates with a concluding short note and future trends.

  4. Cervical anterior hybrid technique with bi-level Bryan artificial disc replacement and adjacent segment fusion for cervical myelopathy over three consecutive segments.

    Science.gov (United States)

    Chen, Jiang; Xu, Lin; Jia, Yu-Song; Sun, Qi; Li, Jin-Yu; Zheng, Chen-Ying; Bai, Chun-Xiao; Yu, Qin-Sheng

    2016-05-01

    This study aimed to assess the preliminary clinical efficacy and feasibility of the hybrid technique for multilevel cervical myelopathy. Considering the many shortcomings of traditional treatment methods for multilevel cervical degenerative myelopathy, hybrid surgery (bi-level Bryan artificial disc [Medtronic Sofamor Danek, Memphis, TN, USA] replacement and anterior cervical discectomy and fusion) should be considered. Between March 2006 and November 2012, 108 patients (68 men and 40 women, average age 45years) underwent hybrid surgery. Based on the Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), and Odom's criteria, the clinical symptoms and neurological function before and after surgery were evaluated. Mean surgery duration was 90minutes, with average blood loss of 30mL. Mean follow-up duration was 36months. At the final follow-up, the mean JOA (± standard deviation) scores were significantly higher compared with preoperative values (15.08±1.47 versus 9.18±1.22; P<0.01); meanwhile, NDI values were markedly decreased (12.32±1.03 versus 42.68±1.83; P<0.01). Using Odom's criteria, the clinical outcomes were rated as excellent (76 patients), good (22 patients), fair (six patients), and poor (four patients). These findings indicate that the hybrid method provides an effective treatment for cervical myelopathy over three consecutive segments, ensuring a good clinical outcome. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. A Novel Hybrid Ultramicrotomy/FIB-SEM Technique: Preparation of Serial Electron-Transparent Thin Sections of a Hayabusa Grain

    Science.gov (United States)

    Berger, Eve L.; Keller, Lindsay P.

    2014-01-01

    The Japanese space agency's (JAXA) Hayabusa mission returned the first particulate samples (typically SEM). Using a diamond trim knife, the epoxy surrounding the grain is removed on 3 sides (to within a few microns of the grain); the depth of material removed extends well below the bottom of the particle. The sample is attached to an SEM pin mount, the epoxy coated with conductive paint, and the entire assembly coated with approx. 40nm of carbon to eliminate sample charging during FIB work. A protective carbon cap is placed according to the plan for the 15 FIB sections. The central 'spine' of the cap runs perpendicular to the front of the sample, and the 'ribs' protruding from either side run parallel. Each rib indicates the location of a planned FIB section, and the spine contains the final two planned sections. We use a cap with a 4 micron-wide spine and 2micron-wide ribs that have ?3.5 micron of space between them (narrower cuts result in too much re-deposition of material inside the trenches). Using a 30kV, 3nA ion-beam we expose the front surface of the grain and commence milling trenches between sections. Rather than using the typical C-cut to prepare the sample for lift-out, an L-cut is used instead, leaving the sample connected by an interior tab. tab. Sections are lifted out, attached to TEM grids and thinned to electron transparency. TEM analyses show that our hybrid technique preserves both interior and edge features, including surface modifications from exposure to the space environment, such as damaged rims that form in response to solar wind implantation effects and adhering grains. In addition, the FIB sections provide larger areas that are free of fractures and chatter effects in comparison to the microtome thin sections, thus enabling more accurate measurements of solar flare particle track densities that are used to determine the surface exposure age of the particles.

  6. COED Transactions, Vol. IX, No. 3, March 1977. Evaluation of a Complex Variable Using Analog/Hybrid Computation Techniques.

    Science.gov (United States)

    Marcovitz, Alan B., Ed.

    Described is the use of an analog/hybrid computer installation to study those physical phenomena that can be described through the evaluation of an algebraic function of a complex variable. This is an alternative way to study such phenomena on an interactive graphics terminal. The typical problem used, involving complex variables, is that of…

  7. The karyotype of Festucopsis serpentini (Poaceae Triticeae) from Albania studied by banding techniques and in situ hybridization

    DEFF Research Database (Denmark)

    Linde-Laursen, I.; Seberg, O.; Frederiksen, S.;

    1996-01-01

    The karyotypes of two populations of Festucopsis serpentini (2n = 2x = 14) endemic to Albania were investigated in detail by Giemsa C- and N-banding, AgNO3 staining, and in situ hybridization with an rDNA probe. The complements consisted of 14 large chromosomes, 10 metacentric and 4 SAT-chromosom...

  8. Application of optimization technique to noncrystalline x-ray diffraction microscopy: Guided hybrid input-output method

    Science.gov (United States)

    Chen, Chien-Chun; Miao, Jianwei; Wang, C. W.; Lee, T. K.

    2007-08-01

    We have developed an algorithm that combines the concept of optimization with the conventional hybrid input-output (HIO) algorithm for phase retrieval of oversampled diffraction intensities. In particular, the optimization algorithm of guiding searching direction to locate the global minimum has been implemented. Compared with HIO, this guided HIO algorithm retrieves the lost phase information from diffraction intensities with much better accuracy.

  9. Magneto-optical mode conversion in a hybrid glass waveguide made by sol-gel and ion-exchange techniques

    Science.gov (United States)

    Royer, François; Amata, Hadi; Parsy, François; Jamon, Damien; Ghibaudo, Elise; Broquin, Jean-Emmanuel; Neveu, Sophie

    2012-01-01

    The integration of magneto-optical materials with classical technologies being still a difficult problem, this study explores the possibility to realize a mode converter based on a hybrid structure. A composite magneto-optical layer made of a silica/zirconia matrix doped by magnetic nanoparticles is coated on the top face of ion-exchanged glass waveguides. Optical characterizations that have been carried out demonstrated the efficiency of these hybrid structures in terms of lateral confinement. Furthermore, TE to TM mode conversion has been observed when a longitudinal magnetic field is applied to the device. The amount of this conversion is analysed taking into account the magneto-optical confinement and the modal birefringence of the structure.

  10. Recombinant expression of TLR5 proteins by ligand supplementation and a leucine-rich repeat hybrid technique

    OpenAIRE

    Hong, Minsun; Yoon, Sung-il; Wilson, Ian A.

    2012-01-01

    Vertebrate TLR5 directly binds bacterial flagellin proteins and activates innate immune responses against pathogenic flagellated bacteria. Structural and biochemical studies on the TLR5/flagellin interaction have been challenging due to the technical difficulty in obtaining active recombinant proteins of TLR5 ectodomain (TLR5-ECD). We recently succeeded in production of the N-terminal leucine rich repeats (LRRs) of Danio rerio (dr) TLR5-ECD in a hybrid with another LRR protein, hagfish variab...

  11. Hybrid FOSS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Armstrong researchers are continuing their efforts to further develop FOSS technologies. A hybrid FOSS technique (HyFOSS) employs conventional continuous grating...

  12. A Hybrid Technique Based on Combining Fuzzy K-means Clustering and Region Growing for Improving Gray Matter and White Matter Segmentation

    Directory of Open Access Journals (Sweden)

    Ashraf Afifi

    2012-07-01

    Full Text Available In this paper we present a hybrid approach based on combining fuzzy k-means clustering, seed region growing, and sensitivity and specificity algorithms to measure gray (GM and white matter (WM tissue. The proposed algorithm uses intensity and anatomic information for segmenting of MRIs into different tissue classes, especially GM and WM. It starts by partitioning the image into different clusters using fuzzy k-means clustering. The centers of these clusters are the input to the region growing (SRG method for creating the closed regions. The outputs of SRG technique are fed to sensitivity and specificity algorithm to merge the similar regions in one segment. The proposed algorithm is applied to challenging applications: gray matter/white matter segmentation in magnetic resonance image (MRI datasets. The experimental results show that the proposed technique produces accurate and stable results.

  13. Fiber-wireless integrated mobile backhaul network based on a hybrid millimeter-wave and free-space-optics architecture with an adaptive diversity combining technique.

    Science.gov (United States)

    Zhang, Junwen; Wang, Jing; Xu, Yuming; Xu, Mu; Lu, Feng; Cheng, Lin; Yu, Jianjun; Chang, Gee-Kung

    2016-05-01

    We propose and experimentally demonstrate a novel fiber-wireless integrated mobile backhaul network based on a hybrid millimeter-wave (MMW) and free-space-optics (FSO) architecture using an adaptive combining technique. Both 60 GHz MMW and FSO links are demonstrated and fully integrated with optical fibers in a scalable and cost-effective backhaul system setup. Joint signal processing with an adaptive diversity combining technique (ADCT) is utilized at the receiver side based on a maximum ratio combining algorithm. Mobile backhaul transportation of 4-Gb/s 16 quadrature amplitude modulation frequency-division multiplexing (QAM-OFDM) data is experimentally demonstrated and tested under various weather conditions synthesized in the lab. Performance improvement in terms of reduced error vector magnitude (EVM) and enhanced link reliability are validated under fog, rain, and turbulence conditions.

  14. The Hybrid Programming Technique Of Calling MATLAB Library Functions From Visual C++%Visual C++调用MATLAB函数库的混合编程技术

    Institute of Scientific and Technical Information of China (English)

    徐治

    2015-01-01

    The Visual C++ and MATLAB hybrid programming technique uses VC++ as the powerful software development tool, and directly calls the immense MATLAB algorithm function library while implementing a sophisti-cated algorithm. This approach can achieve the complementation of merits and greatly reduce the coding time of so-phisticated algorithm. This paper introduces the principle of hybrid programming, then details the MATLAB compiler based techniques of coding and project configuration which calls MATLAB function library from VC++.%Visual C++与MATLAB的混合编程技术是以VC++作为强有力的软件开发工具,而在实现复杂算法时则直接调用MATLAB涵盖很广的算法函数库。这种方式可以做到优势互补,大大减少复杂算法的编码时间。本文介绍了混合编程的基本原理,并详细介绍了基于MATLAB编译器的VC++调用MATLAB函数库的代码编写及项目配置等方面的技术。

  15. Hybrid Brain–Computer Interface Techniques for Improved Classification Accuracy and Increased Number of Commands: A Review

    Directory of Open Access Journals (Sweden)

    Keum-Shik Hong

    2017-07-01

    Full Text Available In this article, non-invasive hybrid brain–computer interface (hBCI technologies for improving classification accuracy and increasing the number of commands are reviewed. Hybridization combining more than two modalities is a new trend in brain imaging and prosthesis control. Electroencephalography (EEG, due to its easy use and fast temporal resolution, is most widely utilized in combination with other brain/non-brain signal acquisition modalities, for instance, functional near infrared spectroscopy (fNIRS, electromyography (EMG, electrooculography (EOG, and eye tracker. Three main purposes of hybridization are to increase the number of control commands, improve classification accuracy and reduce the signal detection time. Currently, such combinations of EEG + fNIRS and EEG + EOG are most commonly employed. Four principal components (i.e., hardware, paradigm, classifiers, and features relevant to accuracy improvement are discussed. In the case of brain signals, motor imagination/movement tasks are combined with cognitive tasks to increase active brain–computer interface (BCI accuracy. Active and reactive tasks sometimes are combined: motor imagination with steady-state evoked visual potentials (SSVEP and motor imagination with P300. In the case of reactive tasks, SSVEP is most widely combined with P300 to increase the number of commands. Passive BCIs, however, are rare. After discussing the hardware and strategies involved in the development of hBCI, the second part examines the approaches used to increase the number of control commands and to enhance classification accuracy. The future prospects and the extension of hBCI in real-time applications for daily life scenarios are provided.

  16. Artifact reduction in multichannel pervasive EEG using hybrid WPT-ICA and WPT-EMD signal decomposition techniques

    CERN Document Server

    Bono, Valentina; Das, Saptarshi; Maharatna, Koushik

    2014-01-01

    In order to reduce the muscle artifacts in multi-channel pervasive Electroencephalogram (EEG) signals, we here propose and compare two hybrid algorithms by combining the concept of wavelet packet transform (WPT), empirical mode decomposition (EMD) and Independent Component Analysis (ICA). The signal cleaning performances of WPT-EMD and WPT-ICA algorithms have been compared using a signal-to-noise ratio (SNR)-like criterion for artifacts. The algorithms have been tested on multiple trials of four different artifact cases viz. eye-blinking and muscle artifacts including left and right hand movement and head-shaking.

  17. Hybrid-Thresholding based Image Super-Resolution Technique by the use of Triplet Half-Band Wavelets

    Science.gov (United States)

    Chopade, Pravin B.; Rahulkar, Amol D.; Patil, Pradeep M.

    2016-12-01

    This paper presents a modified image super-resolution scheme based on the wavelet coefficients hybrid-thresholding by the use of triplet half-band wavelets (THW) derived from the generalized half-band polynomial. At first, discrete wavelet transform (DWT) is obtained from triplet half-band kernels and it applied on the low-resolution image to obtain the high frequency sub-bands. These high frequency sub-bands and the original low-resolution image are interpolated to enhance the resolution. Second, stationary wavelet transform is obtained by using THW, which is employed to minimize the loss due to the use of DWT. In addition, hybrid thresholding scheme on wavelet coefficients scheme is proposed on these estimated high-frequency sub-bands in order to reduce the spatial domain noise. These sub-bands are combined together by inverse discrete wavelet transform obtained from THW to generate a high-resolution image. The proposed approach is validated by comparing the quality metrics with existing filter banks and well-known super-resolution scheme.

  18. An enhanced security solution for electronic medical records based on AES hybrid technique with SOAP/XML and SHA-1.

    Science.gov (United States)

    Kiah, M L Mat; Nabi, Mohamed S; Zaidan, B B; Zaidan, A A

    2013-10-01

    This study aims to provide security solutions for implementing electronic medical records (EMRs). E-Health organizations could utilize the proposed method and implement recommended solutions in medical/health systems. Majority of the required security features of EMRs were noted. The methods used were tested against each of these security features. In implementing the system, the combination that satisfied all of the security features of EMRs was selected. Secure implementation and management of EMRs facilitate the safeguarding of the confidentiality, integrity, and availability of e-health organization systems. Health practitioners, patients, and visitors can use the information system facilities safely and with confidence anytime and anywhere. After critically reviewing security and data transmission methods, a new hybrid method was proposed to be implemented on EMR systems. This method will enhance the robustness, security, and integration of EMR systems. The hybrid of simple object access protocol/extensible markup language (XML) with advanced encryption standard and secure hash algorithm version 1 has achieved the security requirements of an EMR system with the capability of integrating with other systems through the design of XML messages.

  19. Implementing a Novel Hybrid Maximum Power Point Tracking Technique in DSP via Simulink/MATLAB under Partially Shaded Conditions

    Directory of Open Access Journals (Sweden)

    Shahrooz Hajighorbani

    2016-01-01

    Full Text Available This paper presents a hybrid maximum power point tracking (MPPT method to detect the global maximum power point (GMPP under partially shaded conditions (PSCs, which have more complex characteristics with multiple peak power points. The hybrid method can track the GMPP when a partial shadow occurs either before or after acquiring the MPP under uniform conditions. When PS occurs after obtaining the MPP during uniform conditions, the new operating point should be specified by the modified linear function, which reduces the searching zone of the GMPP and has a significant effect on reducing the reaching time of the GMPP. Simultaneously, the possible MPPs are scanned and stored when shifting the operating point to a new reference voltage. Finally, after determining the possible location of the GMPP, the GMPP is obtained using the modified P&O. Conversely, when PS occurs before obtaining the MPP, the referenced MPP should be specified. Thus, after recognizing the possible location of the GMPP, the modified P&O can be used to obtain the GMPP. The simulation and experimental implementations for the proposed algorithm are performed with different scenarios of shadowing under different irradiations, which clearly indicate that the proposed method is robust and has a fast tracking speed. Moreover, this work presents the load sizing method for PSCs to avoid controller failure when detecting the GMPP. Additionally, in this paper, the user-friendly method for programming the digital signal processing (DSP via Simulink/MATLAB is presented in detail.

  20. Thermal conductivity prediction of nanoscale phononic crystal slabs using a hybrid lattice dynamics-continuum mechanics technique

    Directory of Open Access Journals (Sweden)

    Charles M. Reinke

    2011-12-01

    Full Text Available Recent work has demonstrated that nanostructuring of a semiconductor material to form a phononic crystal (PnC can significantly reduce its thermal conductivity. In this paper, we present a classical method that combines atomic-level information with the application of Bloch theory at the continuum level for the prediction of the thermal conductivity of finite-thickness PnCs with unit cells sized in the micron scale. Lattice dynamics calculations are done at the bulk material level, and the plane-wave expansion method is implemented at the macrosale PnC unit cell level. The combination of the lattice dynamics-based and continuum mechanics-based dispersion information is then used in the Callaway-Holland model to calculate the thermal transport properties of the PnC. We demonstrate that this hybrid approach provides both accurate and efficient predictions of the thermal conductivity.

  1. Thermal conductivity prediction of nanoscale phononic crystal slabs using a hybrid lattice dynamics-continuum mechanics technique

    Science.gov (United States)

    Reinke, Charles M.; Su, Mehmet F.; Davis, Bruce L.; Kim, Bongsang; Hussein, Mahmoud I.; Leseman, Zayd C.; Olsson-III, Roy H.; El-Kady, Ihab

    2011-12-01

    Recent work has demonstrated that nanostructuring of a semiconductor material to form a phononic crystal (PnC) can significantly reduce its thermal conductivity. In this paper, we present a classical method that combines atomic-level information with the application of Bloch theory at the continuum level for the prediction of the thermal conductivity of finite-thickness PnCs with unit cells sized in the micron scale. Lattice dynamics calculations are done at the bulk material level, and the plane-wave expansion method is implemented at the macrosale PnC unit cell level. The combination of the lattice dynamics-based and continuum mechanics-based dispersion information is then used in the Callaway-Holland model to calculate the thermal transport properties of the PnC. We demonstrate that this hybrid approach provides both accurate and efficient predictions of the thermal conductivity.

  2. The characteristics of novel bimodal Ag-TiO2 nanoparticles generated by hybrid laser-ultrasonic technique

    Science.gov (United States)

    Hamad, Abubaker; Li, Lin; Liu, Zhu; Zhong, Xiang Li; Burke, Grace; Wang, Tao

    2016-04-01

    Silver-titania (Ag-TiO2) nanoparticles with smaller Ag nanoparticles attached to larger TiO2 nanoparticles were generated by hybrid ultrasonic vibration and picosecond laser ablation of Ag and Ti bulk targets in deionised water, for the first time. The laser has a wavelength of 1064 nm and a pulse duration of 10 ps. It was observed that without the ultrasonic vibration, Ag and TiO2 nanoparticles did not combine, thus the role of ultrasonic vibration is essential. In addition, colloidal TiO2 and Ag nanoparticles were generated separately for comparison under the same laser beam characteristics and process conditions. The absorption spectra of colloidal Ag-TiO2 cluster nanoparticles were examined by UV-Vis spectroscopy, and size distribution was characterised using transmission electron microscopy. The morphology and composition of Ag-TiO2 nanoparticles were examined using scanning transmission electron microscopy in high-angle annular dark field, and energy-dispersive X-ray spectroscopy. The crystalline structures were investigated by X-ray diffraction. The size of larger TiO2 particles was in the range 30-150 nm, and the smaller-sized Ag nanoparticles attached to the TiO2 was mainly in the range of 10-15 nm. The yield is more than 50 % with the remaining nanoparticles in the form of uncombined Ag and TiO2. The nanoparticles generated had strong antibacterial effects as tested against E. coli. A discussion is given on the role of ultrasonic vibration in the formation of Ag-TiO2 hybrid nanoparticles by picosecond laser ablation.

  3. Investigation of kinetics and thermodynamics of DNA hybridization by means of 2-D fluorescence spectroscopy and soft/hard modeling techniques.

    Science.gov (United States)

    Ebrahimi, Sara; Kompany-Zareh, Mohsen

    2016-02-01

    Reversible hybridization reaction plays a key role in fundamental biological processes, in many laboratory techniques, and also in DNA based sensing devices. Comprehensive investigation of this process is, therefore, essential for the development of more sophisticated applications. Kinetics and thermodynamics of the hybridization reaction, as a second order process, are systematically investigated with the aid of the soft and hard chemometric methods. Labeling two complementary 21 mer DNA single strands with FAM and Texas red fluorophores, enabled recording of the florescence excitation-emission matrices during the experiments which led to three-way data sets. The presence of fluorescence resonance energy transfer in excitation and emission modes and the closure in concentration mode, made the three-way data arrays rank deficient. To acquire primary chemical information, restricted Tucker3 as a soft method was employed. Herein a model-based method, hard restricted trilinear decomposition, is introduced for in depth analysis of rank deficient three-way data sets. By employing proposed hard method, the nonlinear model parameters as well as the correct profiles could be estimated. In addition, a simple constraint is presented to extract chemically reasonable output profiles regarding the core elements of restricted Tucker3 model.

  4. Photoelastic Stress Analysis by Use of Hybrid Technique and Fringe Phase Shifting Method%利用混合法和相移技术的光弹性应力分析

    Institute of Scientific and Technical Information of China (English)

    白泰铉

    2006-01-01

    Photoelastic fringe patterns for stress analysis are investigated by use of hybrid technique and fringe phase shift method. The first one is a hybrid method which combines the conformal mapping technique and measured data away from the edge of a geometric discontinuity. Photoelastic data are hybridized with complex variable/mapping techniques to calculate photoelastic stress-field around a circular hole or an elliptical hole in plates under uniaxial tensile loading. This method determines full-field stresses in perforated finite tensile plates containing either a circular or an elliptical hole. The second one is a fringe phase shift method to separate isochromatics and isoclinics from photoelastic fringes of a circular disk under diametric compression by use of phase shift method. Digitally determined isochromatics and isoclinics are agreed well with those of manual measurements.

  5. Progress on Application of Yeast Two-hybrid Technique%酵母双杂交技术应用进展

    Institute of Scientific and Technical Information of China (English)

    王婷; 葛怀娜; 郭宏

    2015-01-01

    Yeast two-hybrid system is one of the most powerful and widely used method to detect protein-protein interaction in living cells.Yeast two-hybrid technique is cost-effective, easy to operate, can reach the whole-genome level, and identify the interaction between different varieties.Compared with the traditional detected method, it has obvious advantages and has been applied in more and more fields.In this paper, the yeast two-hybrid technology principle and application were reviewed, including the applications on discovering new protein and proteins’new function, setting up the protein linkage map, studing of human genome DNA library, screening target for drug, and so on.The paper was expected to provide reference for the application of yeast two-hybrid system.%酵母双杂交技术是鉴定蛋白互作最有效和最广泛的分子生物学技术。该技术能直接作用于活细胞,检测细胞内蛋白质互作,具有成本低、易操作、可达到全基因组水平、能进行品种间的互作鉴定等诸多优点。较之传统的检测方法有明显优势,已在越来越多的领域得到应用。对酵母双杂交的技术原理以及应用进行了综述,介绍了该技术在发现新蛋白质、探究蛋白质功能、建立基因组蛋白连锁图、研究人类DNA文库和筛选药物作用位点等方面的重要应用,以期为该技术的广泛应用提供参考。

  6. Realization of MMI Power Splitter by UV-light Imprinting Technique Using Hybrid Sol-Gel SiO2 Materials

    Institute of Scientific and Technical Information of China (English)

    WANG Yue; WU Yuan-Da; LI Jian-Guang; WANG Hong-Jie; HU Xiong-Wei

    2008-01-01

    An efficient fabrication scheme of buried ridge, waveguide devices is demonstrated by UV-light imprinting technique using organic-inorganic hybrid sol-gel Zr-doped SiO2 materials. The refractive indices of a guiding layer and a cladding layer for the buried ridge waveguide structure are 1.537 and 1.492 measured at 1550nm, respectively. The tested results show more circular mode profiles due to existence of the cladding layer. A buried ridge single-mode waveguide operating at 1550nm has a low propagation loss (O.088 dB/cm) and the 1 × 2 MMI power splitter exhibits uniform outputs, with a very low splitting loss of O.029dB at 1549nm.

  7. Suppression subtraction hybridization (SSH) and macroarray techniques reveal differential gene expression profiles in brain of sea bream infected with nodavirus.

    Science.gov (United States)

    Dios, S; Poisa-Beiro, L; Figueras, A; Novoa, B

    2007-03-01

    Despite of the impact that viruses have on aquatic organisms, relatively little is known on how fish fight against these infections. In this work, the brain gene expression pattern of sea bream (Sparus aurata) in response to nodavirus infection was investigated. We used the suppression subtractive hybridization (SSH) method to generate a subtracted cDNA library enriched with gene transcripts differentially expressed after 1 day post-infection. Some of the ESTs from the infected tissues fell in gene categories related to stress and immune responses. For the reverse library (ESTs expressed in controls compared with infected tissues) the most abundant transcripts were of ribosomal and mitochondrial nature. Several ESTs potentially induced by virus exposure were selected for in vivo expression studies. We observed a clear difference in expression between infected and control samples for two candidate genes, ubiquitin conjugating enzyme 7 interacting protein, which seems to play an important role in apoptosis and the interferon induced protein with helicase C domain 1 (mda-5) that contributes to apoptosis and regulates the type I IFN production, a key molecule of the antiviral innate response in most organisms.

  8. Crude oil price forecasting based on hybridizing wavelet multiple linear regression model, particle swarm optimization techniques, and principal component analysis.

    Science.gov (United States)

    Shabri, Ani; Samsudin, Ruhaidah

    2014-01-01

    Crude oil prices do play significant role in the global economy and are a key input into option pricing formulas, portfolio allocation, and risk measurement. In this paper, a hybrid model integrating wavelet and multiple linear regressions (MLR) is proposed for crude oil price forecasting. In this model, Mallat wavelet transform is first selected to decompose an original time series into several subseries with different scale. Then, the principal component analysis (PCA) is used in processing subseries data in MLR for crude oil price forecasting. The particle swarm optimization (PSO) is used to adopt the optimal parameters of the MLR model. To assess the effectiveness of this model, daily crude oil market, West Texas Intermediate (WTI), has been used as the case study. Time series prediction capability performance of the WMLR model is compared with the MLR, ARIMA, and GARCH models using various statistics measures. The experimental results show that the proposed model outperforms the individual models in forecasting of the crude oil prices series.

  9. Prediction of peak ground acceleration of Iran’s tectonic regions using a hybrid soft computing technique

    Institute of Scientific and Technical Information of China (English)

    Mostafa Gandomi; Mohsen Soltanpour; Mohammad R. Zolfaghari; Amir H. Gandomi

    2016-01-01

    A new model is derived to predict the peak ground acceleration (PGA) utilizing a hybrid method coupling artificial neural network (ANN) and simulated annealing (SA), called SA-ANN. The proposed model re-lates PGA to earthquake source to site distance, earthquake magnitude, average shear-wave velocity, faulting mechanisms, and focal depth. A database of strong ground-motion recordings of 36 earthquakes, which happened in Iran’s tectonic regions, is used to establish the model. For more validity verification, the SA-ANN model is employed to predict the PGA of a part of the database beyond the training data domain. The proposed SA-ANN model is compared with the simple ANN in addition to 10 well-known models proposed in the literature. The proposed model performance is superior to the single ANN and other existing attenuation models. The SA-ANN model is highly correlated to the actual records (R ¼ 0.835 and r ¼ 0.0908) and it is subsequently converted into a tractable design equation.

  10. Crude Oil Price Forecasting Based on Hybridizing Wavelet Multiple Linear Regression Model, Particle Swarm Optimization Techniques, and Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Ani Shabri

    2014-01-01

    Full Text Available Crude oil prices do play significant role in the global economy and are a key input into option pricing formulas, portfolio allocation, and risk measurement. In this paper, a hybrid model integrating wavelet and multiple linear regressions (MLR is proposed for crude oil price forecasting. In this model, Mallat wavelet transform is first selected to decompose an original time series into several subseries with different scale. Then, the principal component analysis (PCA is used in processing subseries data in MLR for crude oil price forecasting. The particle swarm optimization (PSO is used to adopt the optimal parameters of the MLR model. To assess the effectiveness of this model, daily crude oil market, West Texas Intermediate (WTI, has been used as the case study. Time series prediction capability performance of the WMLR model is compared with the MLR, ARIMA, and GARCH models using various statistics measures. The experimental results show that the proposed model outperforms the individual models in forecasting of the crude oil prices series.

  11. Analysis of High Yield and Efficiency Technique in Hybrid Rice Zhongzheyou No.1%杂交水稻中浙优1号高产高效技术途径分析

    Institute of Scientific and Technical Information of China (English)

    刘伟明

    2009-01-01

    To understand the high yield and efficiency technique in hybrid rice Zhongzheyou No.1, we conducted the correlation analysis, regression analysis and path analysis of hybrid rice Zhongzheyou No.1 based on the data of its ear, grain and weight at different yield levels. From this study, we put forward the high yield and efficiency technique in Zhongzheyou No.1: on the basis of certain effective ear number, filled grains per ear should be mainly targeted with a consideration to 1 000-grain weight.

  12. A hybrid color space for skin detection using genetic algorithm heuristic search and principal component analysis technique.

    Directory of Open Access Journals (Sweden)

    Mahdi Maktabdar Oghaz

    Full Text Available Color is one of the most prominent features of an image and used in many skin and face detection applications. Color space transformation is widely used by researchers to improve face and skin detection performance. Despite the substantial research efforts in this area, choosing a proper color space in terms of skin and face classification performance which can address issues like illumination variations, various camera characteristics and diversity in skin color tones has remained an open issue. This research proposes a new three-dimensional hybrid color space termed SKN by employing the Genetic Algorithm heuristic and Principal Component Analysis to find the optimal representation of human skin color in over seventeen existing color spaces. Genetic Algorithm heuristic is used to find the optimal color component combination setup in terms of skin detection accuracy while the Principal Component Analysis projects the optimal Genetic Algorithm solution to a less complex dimension. Pixel wise skin detection was used to evaluate the performance of the proposed color space. We have employed four classifiers including Random Forest, Naïve Bayes, Support Vector Machine and Multilayer Perceptron in order to generate the human skin color predictive model. The proposed color space was compared to some existing color spaces and shows superior results in terms of pixel-wise skin detection accuracy. Experimental results show that by using Random Forest classifier, the proposed SKN color space obtained an average F-score and True Positive Rate of 0.953 and False Positive Rate of 0.0482 which outperformed the existing color spaces in terms of pixel wise skin detection accuracy. The results also indicate that among the classifiers used in this study, Random Forest is the most suitable classifier for pixel wise skin detection applications.

  13. A hybrid color space for skin detection using genetic algorithm heuristic search and principal component analysis technique.

    Science.gov (United States)

    Maktabdar Oghaz, Mahdi; Maarof, Mohd Aizaini; Zainal, Anazida; Rohani, Mohd Foad; Yaghoubyan, S Hadi

    2015-01-01

    Color is one of the most prominent features of an image and used in many skin and face detection applications. Color space transformation is widely used by researchers to improve face and skin detection performance. Despite the substantial research efforts in this area, choosing a proper color space in terms of skin and face classification performance which can address issues like illumination variations, various camera characteristics and diversity in skin color tones has remained an open issue. This research proposes a new three-dimensional hybrid color space termed SKN by employing the Genetic Algorithm heuristic and Principal Component Analysis to find the optimal representation of human skin color in over seventeen existing color spaces. Genetic Algorithm heuristic is used to find the optimal color component combination setup in terms of skin detection accuracy while the Principal Component Analysis projects the optimal Genetic Algorithm solution to a less complex dimension. Pixel wise skin detection was used to evaluate the performance of the proposed color space. We have employed four classifiers including Random Forest, Naïve Bayes, Support Vector Machine and Multilayer Perceptron in order to generate the human skin color predictive model. The proposed color space was compared to some existing color spaces and shows superior results in terms of pixel-wise skin detection accuracy. Experimental results show that by using Random Forest classifier, the proposed SKN color space obtained an average F-score and True Positive Rate of 0.953 and False Positive Rate of 0.0482 which outperformed the existing color spaces in terms of pixel wise skin detection accuracy. The results also indicate that among the classifiers used in this study, Random Forest is the most suitable classifier for pixel wise skin detection applications.

  14. Variable weight Khazani-Syed code using hybrid fixed-dynamic technique for optical code division multiple access system

    Science.gov (United States)

    Anas, Siti Barirah Ahmad; Seyedzadeh, Saleh; Mokhtar, Makhfudzah; Sahbudin, Ratna Kalos Zakiah

    2016-10-01

    Future Internet consists of a wide spectrum of applications with different bit rates and quality of service (QoS) requirements. Prioritizing the services is essential to ensure that the delivery of information is at its best. Existing technologies have demonstrated how service differentiation techniques can be implemented in optical networks using data link and network layer operations. However, a physical layer approach can further improve system performance at a prescribed received signal quality by applying control at the bit level. This paper proposes a coding algorithm to support optical domain service differentiation using spectral amplitude coding techniques within an optical code division multiple access (OCDMA) scenario. A particular user or service has a varying weight applied to obtain the desired signal quality. The properties of the new code are compared with other OCDMA codes proposed for service differentiation. In addition, a mathematical model is developed for performance evaluation of the proposed code using two different detection techniques, namely direct decoding and complementary subtraction.

  15. A comparative analysis of different hybrid MCDM techniques considering a case of selection of 3D printers

    Directory of Open Access Journals (Sweden)

    Debapriyo Paul

    2015-07-01

    Full Text Available A multitude of techniques fall under the domain of Multi- Criteria Decision Making (MCDM which is used to select the best alternative among the available ones. The objective of this paper is to compare some of these techniques with respect to the problem of selection of 3D printers, which is associated with multiple attributes. The weights of the criteria were determined using analytical network process (ANP. Next, the alternatives were ranked using three different MCDM techniques- 1.TOPSIS which ranks alternatives having the shortest distance to the ideal solution as well as the greatest distance from the negative-ideal solution 2. Deng’s Similarity based Approach where the most preferred alternative should have the highest degree of similarity to the positive ideal solution and the lowest degree of similarity to the negative-ideal solution and 3.PROMETHEE and GAIA. The solutions for each of these three cases were analyzed thoroughly, and reasons for any deviations were discussed.

  16. A hybrid electron and photon IMRT planning technique that lowers normal tissue integral patient dose using standard hardware.

    Science.gov (United States)

    Rosca, Florin

    2012-06-01

    To present a mixed electron and photon IMRT planning technique using electron beams with an energy range of 6-22 MeV and standard hardware that minimizes integral dose to patients for targets as deep as 7.5 cm. Ten brain cases, two lung, a thyroid, an abdominal, and a parotid case were planned using two planning techniques: a photon-only IMRT (IMRT) versus a mixed modality treatment (E+IMRT) that includes an enface electron beam and a photon IMRT portion that ensures a uniform target coverage. The electron beam is delivered using a regular cutout placed in an electron cone. The electron energy was chosen to provide a good trade-off between minimizing integral dose and generating a uniform, deliverable plan. The authors choose electron energies that cover the deepest part of PTV with the 65%-70% isodose line. The normal tissue integral dose, the dose for ring structures around the PTV, and the volumes of the 75%, 50%, and 25% isosurfaces were used to compare the dose distributions generated by the two planning techniques. The normal tissue integral dose was lowered by about 20% by the E+IMRT plans compared to the photon-only IMRT ones for most studied cases. With the exception of lungs, the dose reduction associated to the E+IMRT plans was more pronounced further away from the target. The average dose ratio delivered to the 0-2 cm and the 2-4 cm ring structures for brain patients for the two planning techniques were 89.6% and 70.8%, respectively. The enhanced dose sparing away from the target for the brain patients can also be observed in the ratio of the 75%, 50%, and 25% isodose line volumes for the two techniques, which decreases from 85.5% to 72.6% and further to 65.1%, respectively. For lungs, the lateral electron beams used in the E+IMRT plans were perpendicular to the mostly anterior/posterior photon beams, generating much more conformal plans. The authors proved that even using the existing electron delivery hardware, a mixed electron/photon planning

  17. Modeling the structure and absorption spectra of stilbazolium merocyanine in polar and nonpolar solvents using hybrid QM/MM techniques.

    Science.gov (United States)

    Murugan, N Arul; Kongsted, Jacob; Rinkevicius, Zilvinas; Aidas, Kestutis; Ågren, Hans

    2010-10-28

    We have performed Car-Parrinello mixed quantum mechanics/molecular mechanics (CP-QM/MM) calculations for stilbazolium merocyanine (SM) in polar and nonpolar solvents in order to explore the role of solute molecular geometry, solvation shell structure, and different interaction mechanisms on the absorption spectra and its dependence on solvent polarity. On the basis of the average bond length values and group charge distributions, we find that the SM molecule remains in a neutral quinonoid form in chloroform (a nonpolar solvent) while it transforms to a charge-separated benzenoid form in water (a polar solvent). Based on a quantum mechanical/molecular mechanical response technique, with different MM descriptions for the water environment, absorption spectra were obtained as averages over configurations derived from the CP-QM/MM simulations. We show that for SM in water the solute polarization plays a major role in predictions of the λ(max) and solvatochromic shift and that once this effect is included the contributions from solvent polarization and intermolecular charge transfer become less important. For SM in chloroform and water solvents, we have also performed absorption spectra calculations using a polarizable continuum model in order to address its relative performance compared to the QM/MM response technique. In the case of SM in water, our study supports the notion that, in order to predict accurate absorption spectra and solvatochromic shifts, it is important to use a discrete description of the solvent when it, as in water, is involved in site-specific interaction with the solute molecule. The technique is thus shown to outperform the more conventional polarizable continuum model in predicting the solvatochromic shift.

  18. M-band flat-response design of X-ray transmission photocathode%透射式X射线光阴极的M带平响应设计

    Institute of Scientific and Technical Information of China (English)

    高扬; 曹柱荣; 李晋; 杨志文; 陈韬; 黎宇坤; 刘慎业

    2013-01-01

    The diagnosis of X-ray flux with high temporal and spatial resolutions is important in the researches of hohlraum physics, and spectral response coupling and design of spectrum rebuilding unit are key issues in the design of flat-response streak camera. Based on the study of the spectral response characteristics of streak camera and X-ray transmission photocathode, compound filter is adopted to realize the M-band band-pass flat-response of streak camera. The calculation shows that the flatness of spectral response is better than 2.7% with an acceptable band pass effect.%获取高时空分辨的M带X射线辐射能流信息是黑腔物理研究的重要内容之一,条纹相机平响应存在谱响应耦合、谱改造元件结构设计等问题.通过对条纹相机和透射式X射线光阴极谱响应特性的研究,提出组合滤片调制法以实现条纹相机M带带通平响应.计算表明,在M带能区内谱灵敏度不平整度仅为2.7%,带通效果良好.

  19. Validation of a low-dose hybrid RSA and fluoroscopy technique: Determination of accuracy, bias and precision.

    Science.gov (United States)

    Ioppolo, James; Börlin, Niclas; Bragdon, Charles; Li, Mingguo; Price, Roger; Wood, David; Malchau, Henrik; Nivbrant, Bo

    2007-01-01

    Analyzing skeletal kinematics with radiostereometric analysis (RSA) following corrective orthopedic surgery allows the quantitative comparison of different implant designs. The purpose of this study was to validate a technique for dynamically estimating the relative position and orientation of skeletal segments using RSA and single plane X-ray fluoroscopy. Two micrometer-based in vitro phantom models of the skeletal segments in the hip and knee joints were used. The spatial positions of tantalum markers that were implanted into each skeletal segment were reconstructed using RSA. The position and orientation of each segment were determined in fluoroscopy images by minimizing the difference between the markers measured and projected in the image plane. Accuracy was determined in terms of bias and precision by analyzing the deviation between the applied displacement protocol and measured pose estimates. Measured translational accuracy was less than 100 microm parallel to the image plane and less than 700 microm in the direction orthogonal to the image plane. The measured rotational error was less than 1 degrees . Measured translational and rotational bias was not statistically significant at the 95% level of confidence. The technique allows real-time kinematic skeletal measurements to be performed on human subjects implanted with tantalum markers for quantitatively measuring the motion of normal joints and different implant designs.

  20. Empleo de la técnica hibridación in situ fluorescente para visualizar microorganismos Use of fluorescence in situ hybridization technique to visualize microorganisms

    Directory of Open Access Journals (Sweden)

    Raúl Rodríguez Martínez

    2011-12-01

    Full Text Available La hibridación in situ fluorescente (FISH, es una técnica que emplea sondas de oligonucleótidos marcadas con fluorocromos las cuales van dirigidas hacia secuencias específicas del ácido ribonucleico ribosomal (ARNr, lo que permite la identificación rápida y específica de células microbianas ya sea que estén como células individuales o se encuentren agrupadas en su ambiente natural. El conocimiento de la composición y distribución de los microorganismos en los hábitats naturales, proporciona un soporte sólido para comprender la interacción entre las diversas especies que componen el micro hábitat. El objetivo de la revisión es presentar la forma como ha evolucionado la hibridación, el empleo del ARNr como molécula diana, los tipos de marcaje, los marcadores fluorescentes empleados hoy en día, la metodología, así como las mejoras que se le han hecho a la técnica FISH al emplearse en conjunto con otras técnicas en la identificación microbiana. Salud UIS 2011; 43 (3: 307-316Fluorescence in situ hybridization (FISH, is a technique that uses oligonucleotides probes labeled with fluorochromes which are directed to specific sequences of ribosomal ribonucleic acid (rRNA, this allows the rapid and specific identification of microbial cells whether as individual cells or grouped cells in their natural environment. Knowledge of the composition and distribution of microorganisms in natural habitats provides a solid support to understand interaction between different species in the microhabitat. This review shows how hybridization has evolved, the use of rRNA as target molecule, the type of labeling, the labeled uses today in fluorescent and the methodology, as well as the improvements that have been made to the FISH technique when is used in conjunction with other techniques in microbial identification. Salud UIS 2011; 43 (3: 307-316

  1. Transactivating effect of complete S protein of hepatitis B virus and cloning of genes transactivated by complete S protein using suppression subtractive hybridization technique

    Institute of Scientific and Technical Information of China (English)

    Gui-Qin Bai; Yan Liu; Jun Cheng; Shu-Lin Zhang; Ya-Fei Yue; Yan-Ping Huang; Li-Ying Zhang

    2005-01-01

    AIM: To investigate the transactivating effect of complete S protein of hepatitis B virus (HBV) and to construct a subtractive cDNA library of genes transactivated by complete S protein of HBV by suppression subtractive hybridization (SSH) technique and to clone genes associated with its transactivation activity, and to pave the way for elucidating the pathogenesis of hepatitis B virus infection.METHODS: pcDNA3.1(-)-complete S containing full-length HBV S gene was constructed by insertion of HBV complete S gene into BarmH-I/Kpn I sites. HepG2 cells were cotransfected with pcDNA3.1(-)-complete S and pSV-lacZ.After 48 h, cells were collected and detected for the expression of β-galactosidase (β-gal). Suppression subtractive hybridization and bioinformatics techniques were used.The mRNA of HepG2 cells transfected with pcDNA3.1(-)-complete S and pcDNA3.1(-) empty vector was isolated,and detected for the expression of complete S protein by reverse transcription polymerase chain reaction (RT-PCR)method, and cDNA was synthesized. After digestion with restriction enzyme RcaI, cDNA fragments were obtained.Tester cDNA was then divided into two groups and ligated to the specific adaptors 1 and 2, respectively. After tester cDNA had been hybridized with driver cDNA twice and underwent nested PCR twice, amplified cDNA fragments were subcloned into pGEM-Teasy vectors to set up the subtractive library. Amplification of the library was carried out within E. coli strain DH5α. The cDNA was sequenced and analyzed in GenBank with BLAST search after polymerase chain reaction (PCR) amplification.RESULTS: The complete S mRNA could be detected by RT-PCR in HepG2 cells transfected with the pcDNA3.1(-)-complete S. The activity of β-gal in HepG2 cells transfected with the pcDNA3.1(-)-complete S was 6.9 times higher than that of control plasmid. The subtractive library of genes transactivated by HBV complete S protein was constructed successfully. The amplified library contains 86

  2. Hybrid and Etch-Less Electrooptic Waveguide Modulator Based on Photo-Bleaching and Strain Induced Optical Waveguide Technique in Polymer.

    Science.gov (United States)

    Kim, Richard; Kang, Byeong-Mo; Jeong, Woon-Jo; Jung, Yang-June; Park, Hyuk-Reol; Kim, Chang-Dae; So, Soon-Youl; Lee, Jin; Park, Gye-Choon; Park, Yongjun

    2016-02-01

    A hybrid and etchless electrooptic (EO) polymer waveguide modulator based on both a photo-bleaching-induced optical waveguide (PBOW) and a strain-induced optical waveguide (SIOW) is described. The SIOW is defined by a metal strip line stressor deposited on top of the upper cladding that introduces the refractive index change within the core region. The PBOW technique is used to form an optical waveguide which is based on a photo-bleaching process, known as a photo-oxidation that is an irreversible decomposition of EO material, resulting in a permanent decrease in index of refraction. It is shown that this proposed fabrication idea combining two etchless techniques can be applicable to a wide range of polymer photonic integrated circuits. Preliminary results obtained from fabricated devices reveal that their half-wave voltage are ranging from 8 V to 10 V, their extinction ratio exhibits more than 15 dB, and the fiber-to-waveguide-to-lens loss is estimated to be ~9.5 dB for TM polarization at 1.55/m wavelength in the active interaction of ~1.5 cm long.

  3. Improving Semantic Updating Method on 3d City Models Using Hybrid Semantic-Geometric 3d Segmentation Technique

    Science.gov (United States)

    Sharkawi, K.-H.; Abdul-Rahman, A.

    2013-09-01

    to LoD4. The accuracy and structural complexity of the 3D objects increases with the LoD level where LoD0 is the simplest LoD (2.5D; Digital Terrain Model (DTM) + building or roof print) while LoD4 is the most complex LoD (architectural details with interior structures). Semantic information is one of the main components in CityGML and 3D City Models, and provides important information for any analyses. However, more often than not, the semantic information is not available for the 3D city model due to the unstandardized modelling process. One of the examples is where a building is normally generated as one object (without specific feature layers such as Roof, Ground floor, Level 1, Level 2, Block A, Block B, etc). This research attempts to develop a method to improve the semantic data updating process by segmenting the 3D building into simpler parts which will make it easier for the users to select and update the semantic information. The methodology is implemented for 3D buildings in LoD2 where the buildings are generated without architectural details but with distinct roof structures. This paper also introduces hybrid semantic-geometric 3D segmentation method that deals with hierarchical segmentation of a 3D building based on its semantic value and surface characteristics, fitted by one of the predefined primitives. For future work, the segmentation method will be implemented as part of the change detection module that can detect any changes on the 3D buildings, store and retrieve semantic information of the changed structure, automatically updates the 3D models and visualize the results in a userfriendly graphical user interface (GUI).

  4. Ranking factors involved in product design using a hybrid model of Quality Function Deployment, Data Envelopment Analysis and TOPSIS technique

    Directory of Open Access Journals (Sweden)

    Davood Feiz

    2014-08-01

    Full Text Available Quality function deployment (QFD is one such extremely important quality management tool, which is useful in product design and development. Traditionally, QFD rates the design requirements (DRs with respect to customer requirements, and aggregates the rating to get relative importance score of DRs. An increasing number of studies emphasize on the need to incorporate additional factors, such as cost and environmental impact, while calculating the relative importance of DRs. However, there are different methodologies for driving the relative importance of DRs, when several additional factors are considered. TOPSIS (technique for order preferences by similarity to ideal solution is suggested for the purpose of the research. This research proposes new approach of TOPSIS for considering the rating of DRs with respect to CRs, and several additional factors, simultaneously. Proposed method is illustrated using by step-by-step procedure. The proposed methodology was applied for the Sanam Electronic Company in Iran.

  5. Novel preparation of controlled porosity particle/fibre loaded scaffolds using a hybrid micro-fluidic and electrohydrodynamic technique.

    Science.gov (United States)

    Parhizkar, Maryam; Sofokleous, Panagiotis; Stride, Eleanor; Edirisinghe, Mohan

    2014-11-27

    The purpose of this research was to produce multi-dimensional scaffolds containing biocompatible particles and fibres. To achieve this, two techniques were combined and used: T-Junction microfluidics and electrohydrodynamic (EHD) processing. The former was used to form layers of monodispersed bovine serum albumin (BSA) bubbles, which upon drying formed porous scaffolds. By altering the T-Junction processing parameters, bubbles with different diameters were produced and hence the scaffold porosity could be controlled. EHD processing was used to spray or spin poly(lactic-co-glycolic) (PLGA), polymethysilsesquioxane (PMSQ) and collagen particles/fibres onto the scaffolds during their production and after drying. As a result, multifunctional BSA scaffolds with controlled porosity containing PLGA, PMSQ and collagen particles/fibres were obtained. Product morphology was studied by optical and scanning electron microscopy. These products have potential applications in many advanced biomedical, pharmaceutical and cosmetic fields e.g. bone regeneration, drug delivery, cosmetic cream lathers, facial scrubbing creams etc.

  6. A Hybrid Reliable Data Transmission based on Ant-agent Resource Allocation Technique in EEMCC Protocol for MANETS

    Directory of Open Access Journals (Sweden)

    Dr. M. Rajanbabu

    2014-04-01

    Full Text Available Real time multicast applications in mobile adhoc network brings forward added advantages in wireless network. The fragile and mobile environment of adhoc network produces the need of bandwidth allocation for real time applications. Reliability is also an important factor in multicasting in mobile adhoc networks (MANETs, as it confirms eventual delivery of all the data to all the group members, without enforcing any particular delivery order in EEMCCP. In the first phase of this paper, we design an "ant agent-resource allocation‟ technique for reserving bandwidth for real-time multicast applications. In the forward phase, the source sends a forward ant agent which collects the bandwidth information of intermediate nodes and reserves a bandwidth for real-time flow for each multicast receiver. In the backward phase, the backward ant confirms the allocation and feeds the bandwidth information to the source.

  7. Hybrid technique for DeBakey type Ⅰ aortic dissection%DeBakeyⅠ型主动脉夹层的杂交手术治疗

    Institute of Scientific and Technical Information of China (English)

    郑先杰; 郭大乔; 张双林; 张庄; 赵爱国; 张国瑜; 张筱扬; 董彦军; 段淑敏; 符伟国

    2010-01-01

    Objective To explore the efficacy,indication and the treatment of complication of concomitant thoracic aortic replacement and endoluminal stent grafting (hybrid technique) for DeBakey type Ⅰ aortic dissection. Methods From September 2005 to June 2009,12 patients with acute DeBakey type Ⅰ aortic dissection were diagnosed by contrast-enhanced CT or MRI scan, and underwent hybrid technique.Computed tomography angiography (CTA) was performed in each patient at 2,6 months after operation to check up the post-operative course,such as ascending aortic and vascular prosthesis of aortic arch and decending aorta. The time of the post-operational follow-up was 6 -36 months. Results All patients successfully recovered from surgery procedure,no serious complication. The time of cardiopulmonary bypass was 196 -298 (264.0 ± 36.6) min,arrest time of ascending aortic was 89 -276 (213.6 ±43.8) min. All patients were discharged from hospital. Contrast-enhanced CT or MRI indicated the vascular prosthesis to been unobstructed,no endo-stent dislocation and no organ ischemia, the false lumen and thrombosis disappeared in 10 patients,but false lumen and leakage happened in 2 patients at 2 months after operation.The false lumen disappeared at 6 months after operation. Conclusions Hybrid technique for DeBakey type Ⅰ aortic dissection is satisfactory in short term effect with less invasiveness and definite safety. However,further studies are needed to evaluate its long-term outcomes.%目的 探讨DeBakey Ⅰ型主动脉夹层行升主动脉并全弓置换加降主动脉支架置入术(即杂交手术)的疗效、适应证的选择和并发症的处理.方法 2005年9月至2009年6月,经CT增强扫描或磁共振确诊DeBakey Ⅰ型主动脉夹层患者12例,均行杂交手术.术后2、6个月复查胸部CT增强扫描,了解升主动脉、主动脉弓人工血管及降主动脉血管内覆膜支架的情况.结果 12例患者全部手术成功,无严

  8. Improving the prediction of going concern of Taiwanese listed companies using a hybrid of LASSO with data mining techniques.

    Science.gov (United States)

    Goo, Yeung-Ja James; Chi, Der-Jang; Shen, Zong-De

    2016-01-01

    The purpose of this study is to establish rigorous and reliable going concern doubt (GCD) prediction models. This study first uses the least absolute shrinkage and selection operator (LASSO) to select variables and then applies data mining techniques to establish prediction models, such as neural network (NN), classification and regression tree (CART), and support vector machine (SVM). The samples of this study include 48 GCD listed companies and 124 NGCD (non-GCD) listed companies from 2002 to 2013 in the TEJ database. We conduct fivefold cross validation in order to identify the prediction accuracy. According to the empirical results, the prediction accuracy of the LASSO-NN model is 88.96 % (Type I error rate is 12.22 %; Type II error rate is 7.50 %), the prediction accuracy of the LASSO-CART model is 88.75 % (Type I error rate is 13.61 %; Type II error rate is 14.17 %), and the prediction accuracy of the LASSO-SVM model is 89.79 % (Type I error rate is 10.00 %; Type II error rate is 15.83 %).

  9. Visceral hybrid reconstruction of thoracoabdominal aortic aneurysm after open repair of type a aortic dissection by the Bentall procedure with the elephant trunk technique: A case report

    Directory of Open Access Journals (Sweden)

    Marjanović Ivan

    2014-01-01

    Full Text Available Introduction. Reconstruction of chronic type B dissection and thoracoabdominal aortic aneurysm (TAAA remaining after the emergency reconstruction of the ascending thoracic aorta and aortic arch for acute type A dissection represents one of the major surgical challenges. Complications of chronic type B dissection are aneurysmal formation and rupture of an aortic aneurysm with a high mortality rate. We presented a case of visceral hybrid reconstruction of TAAA secondary to chronic dissection type B after the Bentall procedure with the elephant trunk technique due to acute type A aortic dissection in a high-risk patient. Case report. A 62 year-old woman was admitted to our institution for reconstruction of Crawford type I TAAA secondary to chronic dissection. The patient had had an acute type A aortic dissection 3 years before and undergone reconstruction by the Bentall procedure with the elephant trunk technique with valve replacement. On admission the patient had coronary artery disease (myocardial infarction, two times in the past 3 years, congestive heart disease with ejection fraction of 25% and chronic obstructive pulmonary disease. On computed tomography (CT of the aorta TAAA was revealed with a maximum diameter of 93 mm in the descending thoracic aorta secondary to chronic dissection. All the visceral arteries originated from the true lumen with exception of the celiac artery (CA, and the end of chronic dissection was below the origin of the superior mesenteric artery (SMA. The patient was operated on using surgical visceral reconstruction of the SMA, CA and the right renal artery (RRA as the first procedure. Postoperative course was without complications. Endovascular TAAA reconstruction was performed as the second procedure one month later, when the elephant trunk was used as the proximal landing zone for the endograft, and distal landing zone was the level of origin of the RRA. Postoperatively, the patient had no neurological deficit and

  10. A fast and robust new pore-network extraction method based on hybrid median axis and maximal inscribed ball techniques

    Science.gov (United States)

    Timofey, Sizonenko; Karsanina, Marina; Byuk, Irina; Gerke, Kirill

    2016-04-01

    To characterize pore structure relevant to single and multi-phase flow modelling it is of special interest to extract topology of the pore space. This is usually achieved using so-called pore-network models. Such models are useful not only to characterize pore space and pore size distributions, but also provide means to simulate flow and transport with very limited computational resources compared to other pore-scale modelling techniques. The main drawback of the pore-network approach is that they have first to simplify the pore space geometry. This crucial step is both time consuming and prone to numerous errors. Two most popular methods based on median axis or inscribed maximal balls have their own strong sides and disadvantages. To address aforementioned problems related to pore-network extraction here we propose a novel method utilizing the advantages of both popular approaches. Combining two algorithms resulted in much faster and robust extraction methodology. Moreover, we have found that accurate topology representation requires extension of the conventional pore-body and pore-throat classification. We test our new methodology using pore structures with "analytical solutions" such as different sphere packs. In addition, we rigorously compare it against inscribed maximal balls methodology's results using numerous 3D images of sandstone and carbonate rocks, soils and some other porous materials. Another verification includes permeability calculations which are also compared both against lab data and voxel based pore-scale modelling simulations. This work was partially supported by RFBR grant 15-34-20989 (X-ray tomography and image fusion) and RSF grant 14-17-00658 (image segmentation and pore-scale modelling).

  11. Comparison of pure and hybrid iterative reconstruction techniques with conventional filtered back projection: Image quality assessment in the cervicothoracic region

    Energy Technology Data Exchange (ETDEWEB)

    Katsura, Masaki, E-mail: mkatsura-tky@umin.ac.jp [Department of Radiology, Graduate School of Medicine, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8655 (Japan); Sato, Jiro; Akahane, Masaaki; Matsuda, Izuru; Ishida, Masanori; Yasaka, Koichiro; Kunimatsu, Akira; Ohtomo, Kuni [Department of Radiology, Graduate School of Medicine, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8655 (Japan)

    2013-02-15

    Objectives: To evaluate the impact on image quality of three different image reconstruction techniques in the cervicothoracic region: model-based iterative reconstruction (MBIR), adaptive statistical iterative reconstruction (ASIR), and filtered back projection (FBP). Methods: Forty-four patients underwent unenhanced standard-of-care clinical computed tomography (CT) examinations which included the cervicothoracic region with a 64-row multidetector CT scanner. Images were reconstructed with FBP, 50% ASIR-FBP blending (ASIR50), and MBIR. Two radiologists assessed the cervicothoracic region in a blinded manner for streak artifacts, pixilated blotchy appearances, critical reproduction of visually sharp anatomical structures (thyroid gland, common carotid artery, and esophagus), and overall diagnostic acceptability. Objective image noise was measured in the internal jugular vein. Data were analyzed using the sign test and pair-wise Student's t-test. Results: MBIR images had significant lower quantitative image noise (8.88 ± 1.32) compared to ASIR images (18.63 ± 4.19, P < 0.01) and FBP images (26.52 ± 5.8, P < 0.01). Significant improvements in streak artifacts of the cervicothoracic region were observed with the use of MBIR (P < 0.001 each for MBIR vs. the other two image data sets for both readers), while no significant difference was observed between ASIR and FBP (P > 0.9 for ASIR vs. FBP for both readers). MBIR images were all diagnostically acceptable. Unique features of MBIR images included pixilated blotchy appearances, which did not adversely affect diagnostic acceptability. Conclusions: MBIR significantly improves image noise and streak artifacts of the cervicothoracic region over ASIR and FBP. MBIR is expected to enhance the value of CT examinations for areas where image noise and streak artifacts are problematic.

  12. Hybrid intelligent engineering systems

    CERN Document Server

    Jain, L C; Adelaide, Australia University of

    1997-01-01

    This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

  13. Hybrid polymer microspheres

    Science.gov (United States)

    Rembaum, A.

    1980-01-01

    Techniques have been successfully tested for bonding polymeric spheres, typically 0.1 micron in diameter, to spheres with diameter up to 100 microns. Hybrids are being developed as improved packing material for ion-exchange columns, filters, and separators.

  14. 基于DICache的混合线索解释执行技术%A DICache-Based Hybrid Threaded Interpretation Technique

    Institute of Scientific and Technical Information of China (English)

    陈微; 王志英; 陈顼颢; 沈立; 陆洪毅; 肖侬

    2012-01-01

    Interpretation-based instruction set emulation provides a solution to the binary compatibility problem. The organization of the interpretation process has great impact on the performance of an interpreter. Centralized interpretation is inefficient while the traditional threaded interpretation is not suitable for interpreting the CISC Instruction Set Architecture (ISA) because of the complicated instruction decoding process. We propose a DICache-based hybrid interpretation technique. DICache can dynamically predecode the source instruction and convert them into an intermediate form. The DICache access code is appended at the end of each interpreter routine, which enables the threaded interpretation for CISC ISA. We implement an interpreter which interprets the IA-32 instructions on VLIW. We conduct some benchmarks from SPEC INT 2000 to evaluate the performance of the novel threaded interpretation method. It is demonstrated that DICache-based hybrid threaded interpretation can significantly improve the performance of an interpreter.%由解释执行实现的指令集仿真是解决二进制兼容问题的有效手段.解释执行各步骤的组织方式对解释器性能有着重要影响.集中方式效率较低,而效率较高的线索方式由于译码过程过于复杂而无法用于CISC指令集的解释执行.本文提出了一种基于DICache的混合线索解释执行技术,DICache实现一种高效的硬件动态预译码,将源指令转换为一种中间表示,在解释例程中对DICache快速访问实现对CISC指令集的线索解释执行.本文在一个源为IA-32、目标为VLIW的解释器上,采用SPEC INT2000中的测试程序对基于DICache的混合线索解释执行技术进行评估.结果表明该方法可以显著提高解释器的性能.

  15. Identification of dietary patterns associated with obesity in a nationally representative survey of Canadian adults: application of a priori, hybrid, and simplified dietary pattern techniques.

    Science.gov (United States)

    Jessri, Mahsa; Wolfinger, Russell D; Lou, Wendy Y; L'Abbé, Mary R

    2017-03-01

    Background: Analyzing the effects of dietary patterns is an important approach for examining the complex role of nutrition in the etiology of obesity and chronic diseases.Objectives: The objectives of this study were to characterize the dietary patterns of Canadians with the use of a priori, hybrid, and simplified dietary pattern techniques, and to compare the associations of these patterns with obesity risk in individuals with and without chronic diseases (unhealthy and healthy obesity).Design: Dietary recalls from 11,748 participants (≥18 y of age) in the cross-sectional, nationally representative Canadian Community Health Survey 2.2 were used. A priori dietary pattern was characterized with the use of the previously validated 2015 Dietary Guidelines for Americans Adherence Index (DGAI). Weighted partial least squares (hybrid method) was used to derive an energy-dense (ED), high-fat (HF), low-fiber density (LFD) dietary pattern with the use of 38 food groups. The associations of derived dietary patterns with disease outcomes were then tested with the use of multinomial logistic regression.Results: An ED, HF, and LFD dietary pattern had high positive loadings for fast foods, carbonated drinks, and refined grains, and high negative loadings for whole fruits and vegetables (≥|0.17|). Food groups with a high loading were summed to form a simplified dietary pattern score. Moving from the first (healthiest) to the fourth (least healthy) quartiles of the ED, HF, and LFD pattern and the simplified dietary pattern scores was associated with increasingly elevated ORs for unhealthy obesity, with individuals in quartile 4 having an OR of 2.57 (95% CI: 1.75, 3.76) and 2.73 (95% CI: 1.88, 3.98), respectively (P-trend patterns with healthy obesity and unhealthy nonobesity were weaker, albeit significant.Conclusions: Consuming an ED, HF, and LFD dietary pattern and lack of adherence to the recommendations of the 2015 DGAI were associated with a significantly higher risk of

  16. Henkin and Hybrid Logic

    DEFF Research Database (Denmark)

    Blackburn, Patrick Rowan; Huertas, Antonia; Manzano, Maria;

    2014-01-01

    Leon Henkin was not a modal logician, but there is a branch of modal logic that has been deeply influenced by his work. That branch is hybrid logic, a family of logics that extend orthodox modal logic with special proposition symbols (called nominals) that name worlds. This paper explains why...... Henkin’s techniques are so important in hybrid logic. We do so by proving a completeness result for a hybrid type theory called HTT, probably the strongest hybrid logic that has yet been explored. Our completeness result builds on earlier work with a system called BHTT, or basic hybrid type theory...... is due to the first-order perspective, which lies at the heart of Henin’s best known work and hybrid logic....

  17. The applications of fluorescence in situ hybridization technique in tumors of the genitourinary%荧光原位杂交技术在泌尿生殖肿瘤中的应用

    Institute of Scientific and Technical Information of China (English)

    袁振; 蒋雷鸣

    2012-01-01

    随着分子细胞遗传学的快速发展,荧光原位杂交(fluorescence in situ hybridization,FISH)技术已广泛应用于临床和科学研究.FISH技术综合了荧光信号的高度灵敏性、无放射性、直观性及原位杂交的准确性,通过检测样本中基因或染色体的异常改变而应用于遗传性疾病、肿瘤的研究及临床诊断和治疗监测.本文就荧光原位杂交技术在常见的泌尿生殖肿瘤中的应用进行综述.%With the rapid development of molecular cytogenetics, fluorescence in situ hybridization ( FISH ) technique has been widely used in clinical and research. FISH has the high sensitivity of fluorescence signal, non - radioactive , intuitive, and the accuracy of in situ hybridization, can be used in detecting the abnormal gene or chromosome change of genetic diseases, cancer research and clinical diagnosis and treatment monitoring. In this paper, the applications of fluorescence in situ hybridization technique in diagnosis and treatment of common urinary tract cancer are reviewed.

  18. A hybrid breath hold and continued respiration-triggered technique for time-resolved 3D MRI perfusion studies in lung cancer

    Energy Technology Data Exchange (ETDEWEB)

    Hintze, C. [Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Radiologie; Stemmer, A. [Siemens AG (Germany). Healthcare Sector; Bock, M. [Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (DE). Medizinische Physik in der Radiologie] (and others)

    2010-01-15

    Assessment of lung cancer perfusion is impaired by respiratory motion. Imaging times for contrast agent wash-out studies often exceed breath hold capabilities, and respiration triggering reduces temporal resolution. Temporally resolved volume acquisition of entire tumors is required to assess heterogeneity. Therefore, we developed and evaluated an MR measurement technique that exceeds a single breath hold, and provides a variable temporal resolution during acquisition while suspending breath-dependent motion. 20 patients with suspected lung cancer were subjected to perfusion studies using a spoiled 3D gradient echo sequence after bolus injection of 0.07 mmol/kg body weight of Gd-DTPA. 10 acquisitions in expiratory breath hold were followed by 50 navigator-triggered acquisitions under free breathing. Post-processing allowed for co-registration of the 3D data sets. An ROI-based visualization of the signal-time curves was performed. In all cases motion-suspended, time-resolved volume data sets (40 x 33 x 10 cm{sup 3}, voxel size: 2.1 x 2.1 x 5.0 mm{sup 3}) were generated with a variable, initially high temporal resolution (2.25 sec) that was synchronized with the breath pattern and covered up to 8(1)/(2) min. In 7 / 20 cases a remaining offset could be reduced by rigid co-registration. The tumors showed fast wash-in, followed by rapid signal decay (8 / 20) or a plateau. The feasibility of a perfusion study with hybrid breath hold and navigator-triggered time-resolved 3D MRI which combines high initial temporal resolution during breath hold with a long wash-out period under free breathing was demonstrated. (orig.)

  19. A hybrid material as a sorbent phase for the disposable pipette extraction technique enhances efficiency in the determination of phenolic endocrine-disrupting compounds.

    Science.gov (United States)

    Corazza, Gabriela; Merib, Josias; Magosso, Hérica A; Bittencourt, Otávio R; Carasek, Eduardo

    2017-09-01

    In this study, the hybrid material 3-n-propyl(3-methylpyridinium) silsesquioxane chloride (Si3Py(+)Cl(-)) was synthesized and investigated as a novel sorbent phase for the disposable pipette extraction (DPX) technique coupled to high-performance liquid chromatography-florescence detection. This sorbent phase was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Aqueous samples containing the phenolic endocrine-disrupting compounds bisphenol A (BPA), 17α-ethynylestradiol (EE2), 4-tert-octylphenol (4-t-OP), 4-octylphenol (4-OP) and 4-nonylphenol (4-NP) were subjected to DPX procedures and a series of optimizations was performed to determine the ideal extraction conditions using this approach. The proposed sorbent phase exhibited higher extraction efficiency than DPX-RP (reversed phase tips containing styrene-divinylbenzene), commonly used for the determination of the phenolic endocrine- disrupting-compounds under study. Satisfactory analytical performance was achieved with linear ranges from 2 to 100μgL(-1) for 4-t-OP and 1-100μgL(-1) for the other analytes. Limits of detection of 0.60μgL(-1) for 4-t-OP and 0.30μgL(-1) for other analytes, RSDs ranging from 1 to 20% and relative recoveries of 83-116% were obtained. Based on these satisfactory results, this sorbent phase represents a valuable alternative for the extraction of compounds with polar moieties in their structure. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Comparison of iterative model, hybrid iterative, and filtered back projection reconstruction techniques in low-dose brain CT: impact of thin-slice imaging

    Energy Technology Data Exchange (ETDEWEB)

    Nakaura, Takeshi; Iyama, Yuji; Kidoh, Masafumi; Yokoyama, Koichi [Amakusa Medical Center, Diagnostic Radiology, Amakusa, Kumamoto (Japan); Kumamoto University, Department of Diagnostic Radiology, Graduate School of Medical Sciences, Kumamoto (Japan); Oda, Seitaro; Yamashita, Yasuyuki [Kumamoto University, Department of Diagnostic Radiology, Graduate School of Medical Sciences, Kumamoto (Japan); Tokuyasu, Shinichi [Philips Electronics, Kumamoto (Japan); Harada, Kazunori [Amakusa Medical Center, Department of Surgery, Kumamoto (Japan)

    2016-03-15

    The purpose of this study was to evaluate the utility of iterative model reconstruction (IMR) in brain CT especially with thin-slice images. This prospective study received institutional review board approval, and prior informed consent to participate was obtained from all patients. We enrolled 34 patients who underwent brain CT and reconstructed axial images with filtered back projection (FBP), hybrid iterative reconstruction (HIR) and IMR with 1 and 5 mm slice thicknesses. The CT number, image noise, contrast, and contrast noise ratio (CNR) between the thalamus and internal capsule, and the rate of increase of image noise in 1 and 5 mm thickness images between the reconstruction methods, were assessed. Two independent radiologists assessed image contrast, image noise, image sharpness, and overall image quality on a 4-point scale. The CNRs in 1 and 5 mm slice thickness were significantly higher with IMR (1.2 ± 0.6 and 2.2 ± 0.8, respectively) than with FBP (0.4 ± 0.3 and 1.0 ± 0.4, respectively) and HIR (0.5 ± 0.3 and 1.2 ± 0.4, respectively) (p < 0.01). The mean rate of increasing noise from 5 to 1 mm thickness images was significantly lower with IMR (1.7 ± 0.3) than with FBP (2.3 ± 0.3) and HIR (2.3 ± 0.4) (p < 0.01). There were no significant differences in qualitative analysis of unfamiliar image texture between the reconstruction techniques. IMR offers significant noise reduction and higher contrast and CNR in brain CT, especially for thin-slice images, when compared to FBP and HIR. (orig.)

  1. 激光复合加热制备金属纳米粉体材料%Producing Metallic Nanosize Powder by Hybrid Laser and Induction Heating Technique

    Institute of Scientific and Technical Information of China (English)

    谢长生; 胡木林; 等

    2001-01-01

    The renovated hybrid laser and induction heating technique has many advantages in producing metallic nanosize powder,such as high energy efficiency,controllable in procedure parameters and product quality and available for a lot of materials.The results,obtained by computer numerical simulation,show that there are big differences on the shape of temperature distribution curve between different metallic material.The shape of the curves may be changed by changing the input power of the heating system.Meanwhile,the vaporization region of the heated metallic materials is controllable by adjusting the shape of temperature distribution curve and the environment pressure to obtain a high output of the metallic nanosize powder.%激光复合加热制备金属和合金纳米粉体材料,具有能量利用率高,工艺参数可调、产品质量可控、适应面广等特点。计算机数值模拟结果表明,在加热功率相同的条件下,不同受热金属的温度分布曲线差异较大;改变激光和感应热源的输入功率,可以改变温度分布曲线的形状。通过调节温度分布曲线和系统环境压力,可以改变激光复合加热蒸发区域的大小,进而改变金属和合金纳米粉体材料的产率。

  2. Branched-Chain in situ Hybridization for κ and λ Light Chains: A Powerful Ancillary Technique for Determining B-Cell Clonality in Cytology Samples

    Science.gov (United States)

    Arora, Kshitij; Chebib, Ivan; Zukerberg, Lawrence; Gandhi, Manoj; Rivera, Miguel; Ting, David; Deshpande, Vikram

    2017-01-01

    BACKGROUND Current immunohistochemical and in situ hybridization (ISH) assays are generally inconclusive for clonality unless plasmacytic differentiation is present. This study examined a series of cytology specimens and explored the ability of a branched-chain RNA (bRNA) ISH assay for immunoglobulin κ constant (IGKC) and immunoglobulin λ constant (IGLC) to detect a clonal population of B lymphocytes. METHODS Pathology databases were used to identify fine-needle aspiration biopsies (n = 28) and exfoliative cytology samples (n = 20). Demographic, flow cytometry, and excision biopsy results were recorded. bRNA ISH was performed on the Leica Bond platform with the following probes: IGKC, IGLC, immunoglobulin λ-like polypeptide 5 (IGLL5), and a housekeeping gene (HKG). RESULTS The bRNA ISH assay was validated with 30 surgical biopsies. On bRNA ISH, a clonal B-cell population (light-chain ratio > 10:1) was detected in 22 of 28 cases with a final diagnosis of lymphoma. In 2 cases, a κ predominance was present, although the ratio was <10:1. Eleven of the 17 κ-clonal lymphomas also expressed IGLL5, the latter recognized by the presence of an intranuclear signal. Two B-cell lymphomas lacked IGKC and IGLC, whereas 2 cases were negative for the HKG. In 12 of the 20 cases with reactive lymphoid tissue, bRNA ISH identified a polyclonal lymphoid population. No light-chain messenger RNA was detected in 6 cases (typically those associated with very few B cells). CONCLUSIONS The automated bRNA ISH platform is a robust technique for detecting a clonal B-cell population in cytology material. PMID:26524200

  3. Hybrid Baryons

    CERN Document Server

    Page, P R

    2003-01-01

    We review the status of hybrid baryons. The only known way to study hybrids rigorously is via excited adiabatic potentials. Hybrids can be modelled by both the bag and flux-tube models. The low-lying hybrid baryon is N 1/2^+ with a mass of 1.5-1.8 GeV. Hybrid baryons can be produced in the glue-rich processes of diffractive gamma N and pi N production, Psi decays and p pbar annihilation.

  4. Hybrid technique (thoratic aotic replacement combined with endoluminal stent grafting) for aortic dissection%"杂交手术"治疗主动脉夹层

    Institute of Scientific and Technical Information of China (English)

    马少鸿; 张镜芳; 范瑞新; 吴若彬; 黄克力

    2008-01-01

    目的 总结主动脉夹层病人行人工血管置换同时术中植入血管内支架(即"杂交手术")的外科经验.方法 主动脉夹层6例中急性Standford A型4例,其中破口分别在升主动脉2例、降主动脉1例,升降主动脉均有破口1例.行升主动脉并全弓置换同时术中于降主动脉真腔内置入血管内支架(同时行主动脉瓣成型2例、Bentall手术1例);慢性StaMford B型主动脉夹层2例,均为介入无法完成者,破口较大、均在降主动脉起始部、左锁骨下动脉下方,行近端降主动脉置换同时术中于远端降主动脉真腔内置入血管内支架.术后2周及3个月复查全主动脉螺旋CT,了解胸腹主动脉、人工血管及血管内支架情况.结果 所有病人手术成功,体外循环时间38~228 min(平均92 min).Standford A型夹层升主动脉阻断118~186 min(平均136min)、选择性脑灌注33~68min(平均49min);Standford B型夹层:1例在上、下半身分别停循环22、28 min下完成手术,另1例常温下不停循环、保持下半身灌注完成手术.术后恢复顺利,治愈出院.术后2周及3个月复查主动脉螺旋CT示人工血管血流通畅,血管内支架无内瘘及移位,支架远端主动脉真腔扩大、假腔明显缩小.结论 对于夹层撕裂范围广泛、多破口的主动脉夹层病人,行近端夹层动脉瘤切除、人工血管置换同时在远端真腔内植入血管内支架,是一种安全、有效、经济的手术方法.%Objective To summary the experience of concomitant thoratic aotic replacement and endoluminal stent grafting (socalled'Hybrid technique') for aortic dissection. Methods Four patients with acute Standford type A dissection (dissection located inascending aortic in 2 cases, descending aortic in 1, both ascending and descending aortic in 1 ) received ascending aortic and total aor-tic arch replacement and endoluminal stent grafting. Two cases with chronic Standford type B dissection, located in

  5. Cardiac hybrid imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gaemperli, Oliver [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); University Hospital Zurich, Nuclear Cardiology, Cardiovascular Center, Zurich (Switzerland); Kaufmann, Philipp A. [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland)

    2014-05-15

    Hybrid cardiac single photon emission computed tomography (SPECT)/CT imaging allows combined assessment of anatomical and functional aspects of cardiac disease. In coronary artery disease (CAD), hybrid SPECT/CT imaging allows detection of coronary artery stenosis and myocardial perfusion abnormalities. The clinical value of hybrid imaging has been documented in several subsets of patients. In selected groups of patients, hybrid imaging improves the diagnostic accuracy to detect CAD compared to the single imaging techniques. Additionally, this approach facilitates functional interrogation of coronary stenoses and guidance with regard to revascularization procedures. Moreover, the anatomical information obtained from CT coronary angiography or coronary artery calcium scores (CACS) adds prognostic information over perfusion data from SPECT. The use of cardiac hybrid imaging has been favoured by the dissemination of dedicated hybrid systems and the release of dedicated image fusion software, which allow simple patient throughput for hybrid SPECT/CT studies. Further technological improvements such as more efficient detector technology to allow for low-radiation protocols, ultra-fast image acquisition and improved low-noise image reconstruction algorithms will be instrumental to further promote hybrid SPECT/CT in research and clinical practice. (orig.)

  6. Multi-objective optimization of in-situ bioremediation of groundwater using a hybrid metaheuristic technique based on differential evolution, genetic algorithms and simulated annealing

    Directory of Open Access Journals (Sweden)

    Kumar Deepak

    2015-12-01

    Full Text Available Groundwater contamination due to leakage of gasoline is one of the several causes which affect the groundwater environment by polluting it. In the past few years, In-situ bioremediation has attracted researchers because of its ability to remediate the contaminant at its site with low cost of remediation. This paper proposed the use of a new hybrid algorithm to optimize a multi-objective function which includes the cost of remediation as the first objective and residual contaminant at the end of the remediation period as the second objective. The hybrid algorithm was formed by combining the methods of Differential Evolution, Genetic Algorithms and Simulated Annealing. Support Vector Machines (SVM was used as a virtual simulator for biodegradation of contaminants in the groundwater flow. The results obtained from the hybrid algorithm were compared with Differential Evolution (DE, Non Dominated Sorting Genetic Algorithm (NSGA II and Simulated Annealing (SA. It was found that the proposed hybrid algorithm was capable of providing the best solution. Fuzzy logic was used to find the best compromising solution and finally a pumping rate strategy for groundwater remediation was presented for the best compromising solution. The results show that the cost incurred for the best compromising solution is intermediate between the highest and lowest cost incurred for other non-dominated solutions.

  7. Multi-objective optimization of process parameters in Electro-Discharge Diamond Face Grinding based on ANN-NSGA-II hybrid technique

    Science.gov (United States)

    Yadav, Ravindra Nath; Yadava, Vinod; Singh, G. K.

    2013-09-01

    The effective study of hybrid machining processes (HMPs), in terms of modeling and optimization has always been a challenge to the researchers. The combined approach of Artificial Neural Network (ANN) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II) has attracted attention of researchers for modeling and optimization of the complex machining processes. In this paper, a hybrid machining process of Electrical Discharge Face Grinding (EDFG) and Diamond Face Grinding (DFG) named as Electrical Discharge Diamond face Grinding (EDDFG) have been studied using a hybrid methodology of ANN-NSGA-II. In this study, ANN has been used for modeling while NSGA-II is used to optimize the control parameters of the EDDFG process. For observations of input-output relations, the experiments were conducted on a self developed face grinding setup, which is attached with the ram of EDM machine. During experimentation, the wheel speed, pulse current, pulse on-time and duty factor are taken as input parameters while output parameters are material removal rate (MRR) and average surface roughness ( R a). The results have shown that the developed ANN model is capable to predict the output responses within the acceptable limit for a given set of input parameters. It has also been found that hybrid approach of ANN-NSGAII gives a set of optimal solutions for getting appropriate value of outputs with multiple objectives.

  8. Application value of PCR spot hybridization technique in detection of mycoplasma pneumoniae infection%PCR 斑点杂交技术在肺炎支原体感染检测中的应用价值

    Institute of Scientific and Technical Information of China (English)

    张秀娟

    2016-01-01

    Objective To investigate the application value of PCR spot hybridization technique in the detection of mycoplasma pneumoniae(MP) infection .Methods The DNA of 70 respiratory tract specimens from the children with MP infection was extracted for MP specific DNA amplification by PCR .The detection efficiency of MP infection was compared between traditional PCR method and PCR spot hybridization technique .Results Of 70 specimens ,32 specimens were MP positive and 28 specimens were MP negative detected by traditional PCR method and PCR spot hybridization technique .The MP positive was detected by PCR spot hybridization technique in 10 specimens ,which were MP negative by traditional PCR method (P<0 .05) .The sensitivity ,specificity and diagnostic coincidence rate of MP detection by PCR spot hybridization technique were 82.5% ,95.6% and 81.4% ,respectively ,which were higher than 69.6% ,80.6% and 50.2% by traditional PCR method . Conclusion Compared to traditional PCR method ,PCR spot hybridization technique has higher sensitivity and specificity in the detection of M P infection .%目的:探讨 PCR斑点杂交技术在检测肺炎支原体(M P )感染中的临床应用价值。方法收集疑似MP感染患儿的呼吸道标本70份,提取DNA后采用PCR技术将MP特异性DNA片段进行扩增;比较传统PCR法和PCR斑点杂交技术检测M P感染的效能。结果32份临床标本经传统PCR法和PCR斑点杂交技术检测M P均为阳性,28份临床标本检测均为阴性;10份临床标本PCR斑点杂交技术检测为阳性,但传统 PCR法检测为阴性,配对样本χ2检验显示两法检测M P的差异有统计学意义(P<0.05)。 PCR 斑点杂交技术检测 MP 的灵敏度为82.5%,特异度为95.6%,诊断符合率为81.4%;均高于传统PCR法的69.6%、80.6%和50.2%。结论与传统PCR法比较,PCR斑点杂交技术检测M P的灵敏度和特异度高。

  9. Research and Application of High-yield Seed Production Techniques of Hybrid Rice in Ecuador%杂交水稻在厄瓜多尔的高产制种技术研究

    Institute of Scientific and Technical Information of China (English)

    龚志明

    2011-01-01

    The key techniques of seed production of hybrid rice in Ecuador, such as performance of parents' characters, sowing method of female parent, sowing quantity of parents, CA3 dosage, were researched. The results showed that the optimum key techniques are as follows: direct sowing of female parent, sowing quantity of female parent by 45~50 kg/hm2, GA3 dosage with 600~750 g/hm2. Meanwhile, applying this experimental results in field seed production, it successfully supports the high-yield seed production technique of chinese hybrid rice in Ecuador.%对杂交水稻在厄瓜多尔制种的亲本特性表现、母本播种方式、亲本用种量、GA、用量等关键技术进行了研究,确定了采用母本直播方式、母本用种量45~50 kg/hm3、GA3适宜用量600-750 g/hm2等技术要点,并将试验成果应用于大田制种,成功配套了中国杂交水稻在厄瓜多尔的高产制种技术.

  10. Anatomic viral detection is automated: the application of a robotic molecular pathology system for the detection of DNA viruses in anatomic pathology substrates, using immunocytochemical and nucleic acid hybridization techniques.

    Science.gov (United States)

    Montone, K. T.; Brigati, D. J.; Budgeon, L. R.

    1989-01-01

    This paper presents the first automated system for simultaneously detecting human papilloma, herpes simplex, adenovirus, or cytomegalovirus viral antigens and gene sequences in standard formalin-fixed, paraffin-embedded tissue substrates and tissue culture. These viruses can be detected by colorimetric in situ nucleic acid hybridization, using biotinylated DNA probes, or by indirect immunoperoxidase techniques, using polyclonal or monoclonal antibodies, in a 2.0-hour assay performed at a single automated robotic workstation. Images FIG. 1 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 PMID:2773514

  11. Hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    West, J.G.W. [Electrical Machines (United Kingdom)

    1997-07-01

    The reasons for adopting hybrid vehicles result mainly from the lack of adequate range from electric vehicles at an acceptable cost. Hybrids can offer significant improvements in emissions and fuel economy. Series and parallel hybrids are compared. A combination of series and parallel operation would be the ideal. This can be obtained using a planetary gearbox as a power split device allowing a small generator to transfer power to the propulsion motor giving the effect of a CVT. It allows the engine to run at semi-constant speed giving better fuel economy and reduced emissions. Hybrid car developments are described that show the wide range of possible hybrid systems. (author)

  12. Patterning Luminescent Nanocrystalline LaPO4 : Eu and CePO4 : Tb Particles Embedded in Hybrid Organosilica with Soft-Lithographic Techniques

    Directory of Open Access Journals (Sweden)

    Sajid U. Khan

    2012-01-01

    Full Text Available Eu3+-doped LaPO4 and Tb3+-doped CePO4 luminescent nanoparticles embedded in hybrid organosilica were patterned by two soft lithographic techniques. The role of various parameters such as solution chemistry, thermal protocols, and modification of the mold-substrate surface energies related to pattern shape formation and adhesion to the substrates have been studied. The shrinkage of the oxide patterns and shape evolution during the process was also examined. The patterns were characterized with optical and photoluminescence (PL microscopy, X-ray diffraction (XRD, and scanning electron microscopy (SEM. Compositional analyses were carried out with X-ray photoelectron spectroscopy (XPS, low-energy ion scattering (LEIS, and secondary ion mass spectroscopy (SIMS. The results indicated that the final patterns obtained with these two techniques for the same material have different shapes and adherence to the substrates.

  13. Influence of PCL on mechanical properties and bioactivity of ZrO{sub 2}-based hybrid coatings synthesized by sol–gel dip coating technique

    Energy Technology Data Exchange (ETDEWEB)

    Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, Flavia [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Veronesi, Paolo [Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Via Vignolese 905, 41125 Modena (Italy); Lamanna, Giuseppe [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy)

    2014-06-01

    The biological properties of medical implants can be enhanced through surface modifications such as to provide a firm attachment of the implant. In this study, organic–inorganic hybrid coatings have been synthesized via sol–gel dip coating. They consist of an inorganic ZrO{sub 2} matrix in which different amounts of poly(ε-caprolactone) have been entrapped to improve the mechanical properties of the films. The influence of the PCL amount on the microstructural, biological and mechanical properties of the coating has been investigated. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses have shown that the hybrids used for the coating are homogenous and totally amorphous materials; Fourier transform infrared spectroscopy (FT-IR) has demonstrated that hydrogen bonds arise between the organic and inorganic phases. SEM and atomic force microscopy (AFM) have highlighted the nanostructured nature of the film. SEM and EDS analyses, after soaking the samples in a simulated body fluid (SBF), have pointed out the apatite formation on the coating surface, which proves the bone-bonding ability of the nanocomposite bioactive films. Scratch and nano-indentation tests have shown that the coating hardness, stiffness and Young's modulus decrease in the presence of large amounts of the organic phase. - Highlights: • ZrO{sub 2}/PCL organic-inorganic hybrid coatings synthesis via sol-gel dip coating. • Coatings porosity and bioactivity increase in presence of high PCL amount. • Coatings Hardness and Young’s modulus decrease in presence of high PCL amount.

  14. Structural properties and surface wettability of Cu-containing diamond-like carbon films prepared by a hybrid linear ion beam deposition technique

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Peng; Sun, Lili; Li, Xiaowei [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Xu, Sheng [Gao Hong Coating Technology Co., Ltd, Huzhou 313000 (China); Ke, Peiling [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Wang, Aiying, E-mail: aywang@nimte.ac.cn [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

    2015-06-01

    Cu-containing diamond-like carbon (Cu-DLC) films were deposited on Si/glass substrate by a hybrid ion beam deposition system. The Cu concentration (0.1–39.7 at.%) in the film was controlled by varying the sputtering current. The microstructure and composition of Cu-DLC films were investigated systematically. The surface topography, roughness and surface wettability of the films were also studied. Results indicated that with increasing the Cu concentration, the water contact angle of the films changed from 66.8° for pure carbon film to more than 104.4° for Cu-DLC films with Cu concentration larger than 24.4 at.%. In the hydrophilic region, the polar surface energy decreased from 30.54 mJ/m{sup 2} for pure carbon film to 2.48 mJ/m{sup 2} for the film with Cu 7.0 at.%. - Highlights: • Cu-containing diamond-like carbon (DLC) films were deposited by a hybrid ion beam system. • Cu-containing DLC films exhibited a wide range of water contact angle. • The water contact angles vary with the surface energies and surface roughness.

  15. A Novel Hybrid Dimension Reduction Technique for Undersized High Dimensional Gene Expression Data Sets Using Information Complexity Criterion for Cancer Classification

    Directory of Open Access Journals (Sweden)

    Esra Pamukçu

    2015-01-01

    Full Text Available Gene expression data typically are large, complex, and highly noisy. Their dimension is high with several thousand genes (i.e., features but with only a limited number of observations (i.e., samples. Although the classical principal component analysis (PCA method is widely used as a first standard step in dimension reduction and in supervised and unsupervised classification, it suffers from several shortcomings in the case of data sets involving undersized samples, since the sample covariance matrix degenerates and becomes singular. In this paper we address these limitations within the context of probabilistic PCA (PPCA by introducing and developing a new and novel approach using maximum entropy covariance matrix and its hybridized smoothed covariance estimators. To reduce the dimensionality of the data and to choose the number of probabilistic PCs (PPCs to be retained, we further introduce and develop celebrated Akaike’s information criterion (AIC, consistent Akaike’s information criterion (CAIC, and the information theoretic measure of complexity (ICOMP criterion of Bozdogan. Six publicly available undersized benchmark data sets were analyzed to show the utility, flexibility, and versatility of our approach with hybridized smoothed covariance matrix estimators, which do not degenerate to perform the PPCA to reduce the dimension and to carry out supervised classification of cancer groups in high dimensions.

  16. Influence of PCL on mechanical properties and bioactivity of ZrO2-based hybrid coatings synthesized by sol-gel dip coating technique.

    Science.gov (United States)

    Catauro, Michelina; Bollino, Flavia; Veronesi, Paolo; Lamanna, Giuseppe

    2014-06-01

    The biological properties of medical implants can be enhanced through surface modifications such as to provide a firm attachment of the implant. In this study, organic-inorganic hybrid coatings have been synthesized via sol-gel dip coating. They consist of an inorganic ZrO2 matrix in which different amounts of poly(ε-caprolactone) have been entrapped to improve the mechanical properties of the films. The influence of the PCL amount on the microstructural, biological and mechanical properties of the coating has been investigated. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses have shown that the hybrids used for the coating are homogenous and totally amorphous materials; Fourier transform infrared spectroscopy (FT-IR) has demonstrated that hydrogen bonds arise between the organic and inorganic phases. SEM and atomic force microscopy (AFM) have highlighted the nanostructured nature of the film. SEM and EDS analyses, after soaking the samples in a simulated body fluid (SBF), have pointed out the apatite formation on the coating surface, which proves the bone-bonding ability of the nanocomposite bioactive films. Scratch and nano-indentation tests have shown that the coating hardness, stiffness and Young's modulus decrease in the presence of large amounts of the organic phase.

  17. Dynamical investigation of macromolecular hybridization bioassays

    CERN Document Server

    Bittner, R; Wixforth, A

    2002-01-01

    A novel sensoric technique for the dynamical in situ investigation of a hybridization bio assay is presented, which utilizes a metal bead labeling method. Therein, hybridization results in an increased metal coverage on parts of a substrate, where it takes place. Our sensing principle relies on the measurement of the radio frequency impedance of the hybridization spots. We propose several examples for sensor devices.

  18. Measurement of the Cosmic Ray Energy Spectrum and Composition from 10^{17} to 10^{18.3} eV Using a Hybrid Fluorescence Technique

    CERN Document Server

    Abu-Zayyad, T; Bird, D J; Boyer, J; Cao, Z; Catanese, M; Chen, G F; Clay, R W; Covault, C E; Dai, H Y; Dawson, B R; Elbert, J W; Fick, B E; Fortson, Lucy F; Fowler, J W; Gibbs, K G; Glasmacher, M A K; Green, K D; Huang, A; Jui, C; Kidd, M J; Kieda, D B; Knapp, B C; Larsen, C G; Lee, W; Loh, E C; Mannel, E J; Matthews, J; Matthews, J N; Newport, B J; Nitz, D F; Ong, R A; Simpson, K M; Smith, J D; Sinclair, D; Sokolsky, P; Sommers, P; Song, C; Tang, J K K; Thomas, S B; Der Velde, J; Wiencke, L R; Wilkinson, C R; Yoshida, S; Zhang, X Z

    2001-01-01

    We study the spectrum and average mass composition of cosmic rays with primary energies between 10^{17} eV and 10^{18} eV using a hybrid detector consisting of the High Resolution Fly's Eye (HiRes) prototype and the MIA muon array. Measurements have been made of the change in the depth of shower maximum as a function of energy. A complete Monte Carlo simulation of the detector response and comparisons with shower simulations leads to the conclusion that the cosmic ray intensity is changing f rom a heavier to a lighter composition in this energy range. The spectrum is consistent with earlier Fly's Eye measurements and supports the previously found steepening near 4 \\times 10^{17} eV .

  19. Structures and properties of layered bioceramic coatings on pure titanium using a hybrid technique of sandblasting and micro-arc oxidation

    Science.gov (United States)

    Wang, Hong-Yuan; Zhu, Rui-Fu; Lu, Yu-Peng; Xiao, Gui-Yong; Ma, Xiao-Ni; Li, Ying

    2013-10-01

    Sandblasting is the most ordinary approach not only to leave the treated regions in compressive residual stress states but also to alter the surface topography of an implant, and micro-arc oxidation (MAO) provides a novelly effective way to produce porous, adhesive and bioactive implant coatings. In this study, ceramic coatings containing Ca and P elements were deposited on the sandblasted pure titanium substrates through the MAO process, and the bioactive performance of the coatings was improved. In addition, the variation of morphology and microstructure, phase and element composition of the coatings according to treating time and related properties were characterized and analyzed, respectively. It was indicated that the hybrid-treated coatings exhibited better properties than that by MAO method, especially in hydroxyapatite (HA) inducing ability, as evidenced by characterization test and HA formation after simulated body fluid (SBF) immersion for days. The enhancement of modified surface was attributed to the combination of the physical and electrochemical treatments.

  20. PET/MRI: a novel hybrid imaging technique: major clinical indications and preliminary experience in Brazil; PET/RM: um novo metodo de imagem hibrida: principais indicacoes clinicas e experiencia preliminar no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Vitor, Taise; Martins, Karine Minaif; Ionescu, Tudor Mihai and others, E-mail: taisevitor@gmail.com [Hospital Israelita Albert Einstein, Sao Paulo, SP (Brazil)

    2017-04-01

    In recent years, medical imaging with hybrid techniques has widely accepted and employed in clinical routine. PET/MRI offers significant advantages, including excellent contrast and resolution and reduced ionizing radiation, as compared to well-established PET/ CT. Therefore, PET/MRI is a promising modality for oncologic imaging of some regions, such as brain, head and neck, liver and pelvis. This article set out to analyze clinical conditions that could benefit from PET/MRI imaging based on our caseload. The potential of PET/MRI to become the imaging modality of choice for assessment of neurologic and oncologic conditions associated with soft tissues is highlighted. Clinical aspects of PET/MRI and its application to clinical cases are illustrated with examples extracted from the authors' preliminary experience. (author)

  1. 杂交稻元丰优86在永定种植表现及高产栽培技术%Planting Performance and High-yielding Cultivation Techniques of Hybrid Rice Combination Yuanfengyou 86 in Yongding Country

    Institute of Scientific and Technical Information of China (English)

    游梅兰

    2014-01-01

    Yuanfengyou 86, derived from the CMS line Yuanfeng A and a restorer line Minghui 86, was a new hybrid rice combination. Yuanfengyou 86 was registered and released for commercial production by National Crop Variety Appraisal Committee in Fujian province in 2011. During the year of 2012-1013, Yuanfengyou 86 was introduced and planted in Yongding county of Fujian province. In this paper, we introduced planting performance and high-yielding cultivation techniques of Yuanfengyou 86.%元丰优86是用元丰A×明恢86配组育成的三系杂交稻新品种,2011年通过福建省品种审定。2012—2013年在永定县仙师乡示范种植,掌握其特征特性和高产栽培技术。

  2. Analysis of Non-binary Hybrid LDPC Codes

    CERN Document Server

    Sassatelli, Lucile

    2008-01-01

    In this paper, we analyse asymptotically a new class of LDPC codes called Non-binary Hybrid LDPC codes, which has been recently introduced. We use density evolution techniques to derive a stability condition for hybrid LDPC codes, and prove their threshold behavior. We study this stability condition to conclude on asymptotic advantages of hybrid LDPC codes compared to their non-hybrid counterparts.

  3. The human interactome knowledge base (hint-kb): An integrative human protein interaction database enriched with predicted protein–protein interaction scores using a novel hybrid technique

    KAUST Repository

    Theofilatos, Konstantinos A.

    2013-07-12

    Proteins are the functional components of many cellular processes and the identification of their physical protein–protein interactions (PPIs) is an area of mature academic research. Various databases have been developed containing information about experimentally and computationally detected human PPIs as well as their corresponding annotation data. However, these databases contain many false positive interactions, are partial and only a few of them incorporate data from various sources. To overcome these limitations, we have developed HINT-KB (http://biotools.ceid.upatras.gr/hint-kb/), a knowledge base that integrates data from various sources, provides a user-friendly interface for their retrieval, cal-culatesasetoffeaturesofinterest and computesaconfidence score for every candidate protein interaction. This confidence score is essential for filtering the false positive interactions which are present in existing databases, predicting new protein interactions and measuring the frequency of each true protein interaction. For this reason, a novel machine learning hybrid methodology, called (Evolutionary Kalman Mathematical Modelling—EvoKalMaModel), was used to achieve an accurate and interpretable scoring methodology. The experimental results indicated that the proposed scoring scheme outperforms existing computational methods for the prediction of PPIs.

  4. Hybrid Membranes of PLLA/Collagen for Bone Tissue Engineering: A Comparative Study of Scaffold Production Techniques for Optimal Mechanical Properties and Osteoinduction Ability

    Directory of Open Access Journals (Sweden)

    Flávia Gonçalves

    2015-01-01

    Full Text Available Synthetic and natural polymer association is a promising tool in tissue engineering. The aim of this study was to compare five methodologies for producing hybrid scaffolds for cell culture using poly-l-lactide (PLLA and collagen: functionalization of PLLA electrospun by (1 dialkylamine and collagen immobilization with glutaraldehyde and by (2 hydrolysis and collagen immobilization with carbodiimide chemistry; (3 co-electrospinning of PLLA/chloroform and collagen/hexafluoropropanol (HFP solutions; (4 co-electrospinning of PLLA/chloroform and collagen/acetic acid solutions and (5 electrospinning of a co-solution of PLLA and collagen using HFP. These materials were evaluated based on their morphology, mechanical properties, ability to induce cell proliferation and alkaline phosphatase activity upon submission of mesenchymal stem cells to basal or osteoblastic differentiation medium (ODM. Methods (1 and (2 resulted in a decrease in mechanical properties, whereas methods (3, (4 and (5 resulted in materials of higher tensile strength and osteogenic differentiation. Materials yielded by methods (2, (3 and (5 promoted osteoinduction even in the absence of ODM. The results indicate that the scaffold based on the PLLA/collagen blend exhibited optimal mechanical properties and the highest capacity for osteodifferentiation and was the best choice for collagen incorporation into PLLA in bone repair applications.

  5. DEVELOPMENT OF AN AGAR LIFT-DNA/DNA HYBRIDIZATION TECHNIQUE FOR USE IN VISUALIZATION OF THE SPATIAL DISTRIBUTION OF EUBACTERIA ON SOIL SURFACES. (R825415)

    Science.gov (United States)

    AbstractWhile microbial growth is well-understood in pure culture systems, less is known about growth in intact soil systems. The objective of this work was to develop a technique to allow visualization of the two-dimensional spatial distribution of bacterial growth o...

  6. Comparison of conventional culture method and fluorescent in situ hybridization technique for detection of Listeria spp. in ground beef, turkey, and chicken breast fillets in İzmir, Turkey.

    Science.gov (United States)

    Baysal, Ayse Handan

    2014-12-01

    The occurrence of Listeria species in refrigerated fresh chicken breast fillet, turkey breast fillet, and ground beef was evaluated, comparing the conventional culture method and fluorescent in situ hybridization (FISH). FISH uses hybridization of a nucleic acid sequence target of a microorganism with a specific DNA probe labeled with a fluorochrome and imaging by a fluorescence microscope. First, Listeria was inoculated in chicken breast fillet, turkey breast fillet, or ground beef, and the applicability of the FISH method was evaluated. Second, Listeria was detected in fresh chicken breast fillet, turkey breast fillet, and ground beef by culture and FISH methods. Listeria was isolated from 27 (37.4%) of 216 samples by the standard culture method, whereas FISH detected 25 (24.7%) preenriched samples. Of these isolates, 17 (63%) were L. innocua, 6 (22%) L. welshimeri, and 4 (14.8%) L. seeligeri. Overall, the prevalences of Listeria spp. found with the conventional culture method in chicken breast fillet, turkey breast fillet, and ground beef were 9.7, 6.9, and 20.8%, whereas with the FISH technique these values were 11.1, 6.9, and 16.7%, respectively. The molecular FISH technique appears to be a cheap, sensitive, and time-efficient procedure that could be used for routine detection of Listeria spp. in meat. This study showed that retail raw meats are potentially contaminated with Listeria spp. and are, thus, vehicles for transmitting diseases caused by foodborne pathogens, underlining the need for increased precautions, such as implementation of hazard analysis and critical control points and consumer food safety education.

  7. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Rönnkö, M.; Ravn, Anders Peter; Sere, K.

    2003-01-01

    In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time-derivatives in modell......In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time...... parallel composition. Moreover, as the strength of the action system formalism is the support for stepwise development by refinement, we investigate refinement involving a differential action. We show that, due to the predicate transformer semantics, standard action refinement techniques apply also...... to the differential action, thus, allowing stepwise development of hybrid systems Udgivelsesdato: JAN 1...

  8. Hybrid Metaheuristics

    CERN Document Server

    2013-01-01

    The main goal of this book is to provide a state of the art of hybrid metaheuristics. The book provides a complete background that enables readers to design and implement hybrid metaheuristics to solve complex optimization problems (continuous/discrete, mono-objective/multi-objective, optimization under uncertainty) in a diverse range of application domains. Readers learn to solve large scale problems quickly and efficiently combining metaheuristics with complementary metaheuristics, mathematical programming, constraint programming and machine learning. Numerous real-world examples of problems and solutions demonstrate how hybrid metaheuristics are applied in such fields as networks, logistics and transportation, bio-medical, engineering design, scheduling.

  9. A new type of heating furnace adopting controllable hybrid technique%一种采用可控复合技术的新型升温炉

    Institute of Scientific and Technical Information of China (English)

    任晓虎; 霍静思; 曾翔; 肖岩

    2012-01-01

    在普通电加热炉的基础上,通过配备液化燃烧器加热装置,开发了一种可同时实施自动控制电加热和燃气加热复合升温的新型装配式试验炉。试验测试表明,该新型复合式升温方法能够很好地模拟ISO-834标准升(降)温曲线,同时具有电炉安全可靠、测控精度高、操作简便、无污染,以及液化气火焰升温快、容易控制并可真实模拟火灾的优点,因而具有良好的试验效果和经济效果,是一种实用的结构抗火试验设施。%Based on a common electrical furnace, and equipped with liquefied gas burners, a new built-up fire fur- nace that can either heat through automatically electric control or through bowing liquefied gas fire into the furnace is developed. Fire test results indicate that the hybrid heating furnace can heat the test specimens closely following the ISO-834 standard fire curve, and it is of excellent convenience and cost-effectiveness because it combines the merits of electrical heating, such as safe, reliable, highly precise, convenient to control, operational and pollution- proof, with the merits of liquefied gas fire heating, such as heating rapidly, simple to control, and can simulate fire reality. It is proved to be practical fire-resistant heating equipment.

  10. Hybrid intermediaries

    OpenAIRE

    Cetorelli, Nicola

    2014-01-01

    I introduce the concept of hybrid intermediaries: financial conglomerates that control a multiplicity of entity types active in the "assembly line" process of modern financial intermediation, a system that has become known as shadow banking. The complex bank holding companies of today are the best example of hybrid intermediaries, but I argue that financial firms from the "nonbank" space can just as easily evolve into conglomerates with similar organizational structure, thus acquiring the cap...

  11. Hybrid composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available effect was observed for the elongation at break of the hybrid composites. The impact strength of the hybrid composites increased with the addition of glass fibres. The tensile and impact properties of thermoplastic natural rubber reinforced short... panels made from conventional structural materials. Figure 3 illustrates the performance of cellular biocomposite panels against conventional systems used for building and residential construction, namely a pre- cast pre-stressed hollow core concrete...

  12. Improved coronary in-stent visualization using a combined high-resolution kernel and a hybrid iterative reconstruction technique at 256-slice cardiac CT—Pilot study

    Energy Technology Data Exchange (ETDEWEB)

    Oda, Seitaro, E-mail: seisei0430@nifty.com [Department of Diagnostic Radiology, Faculty of Life Sciences, Kumamoto University, 1-1-1 Honjyo, Kumamoto 860-8556 (Japan); Utsunomiya, Daisuke, E-mail: utsunomi@kumamoto-u.ac.jp [Department of Diagnostic Radiology, Faculty of Life Sciences, Kumamoto University, 1-1-1 Honjyo, Kumamoto 860-8556 (Japan); Funama, Yoshinori, E-mail: funama@kumamoto-u.ac.jp [Department of Medical Physics, Faculty of Life Sciences, Kumamoto University, 1-1-1 Honjyo, Kumamoto 860-8556 (Japan); Takaoka, Hiroko, E-mail: hiroko_takayoka@yahoo.co.jp [Department of Diagnostic Radiology, Kumamoto Chuo Hospital, 1-5-1 Tainoshima, Kumamoto 862-0965 (Japan); Katahira, Kazuhiro, E-mail: yy26kk@yahoo.co.jp [Department of Diagnostic Radiology, Kumamoto Chuo Hospital, 1-5-1 Tainoshima, Kumamoto 862-0965 (Japan); Honda, Keiichi, E-mail: k-book@osu.bbiq.jp [Department of Diagnostic Radiology, Kumamoto Chuo Hospital, 1-5-1 Tainoshima, Kumamoto 862-0965 (Japan); Noda, Katsuo, E-mail: k-noda@kumachu.gr.jp [Department of Cardiology, Kumamoto Chuo Hospital, 1-5-1 Tainoshima, Kumamoto 862-0965 (Japan); Oshima, Shuichi, E-mail: shuoshima@e-mail.jp [Department of Cardiology, Kumamoto Chuo Hospital, 1-5-1 Tainoshima, Kumamoto 862-0965 (Japan); Yamashita, Yasuyuki, E-mail: yama@kumamoto-u.ac.jp [Department of Diagnostic Radiology, Faculty of Life Sciences, Kumamoto University, 1-1-1 Honjyo, Kumamoto 860-8556 (Japan)

    2013-02-15

    Objectives: To investigate the diagnostic performance of 256-slice cardiac CT for the evaluation of the in-stent lumen by using a hybrid iterative reconstruction (HIR) algorithm combined with a high-resolution kernel. Methods: This study included 28 patients with 28 stents who underwent cardiac CT. Three different reconstruction images were obtained with: (1) a standard filtered back projection (FBP) algorithm with a standard cardiac kernel (CB), (2) an FBP algorithm with a high-resolution cardiac kernel (CD), and (3) an HIR algorithm with the CD kernel. We measured image noise and kurtosis and used receiver operating characteristics analysis to evaluate observer performance in the detection of in-stent stenosis. Results: Image noise with FBP plus the CD kernel (80.2 ± 15.5 HU) was significantly higher than with FBP plus the CB kernel (28.8 ± 4.6 HU) and HIR plus the CD kernel (36.1 ± 6.4 HU). There was no significant difference in the image noise between FBP plus the CB kernel and HIR plus the CD kernel. Kurtosis was significantly better with the CD- than the CB kernel. The kurtosis values obtained with the CD kernel were not significantly different between the FBP- and HIR reconstruction algorithms. The areas under the receiver operating characteristics curves with HIR plus the CD kernel were significantly higher than with FBP plus the CB- or the CD kernel. The difference between FBP plus the CB- or the CD kernel was not significant. The average sensitivity, specificity, and positive and negative predictive value for the detection of in-stent stenosis were 83.3, 50.0, 33.3, and 91.6% for FBP plus the CB kernel, 100, 29.6, 40.0, and 100% for FBP plus the CD kernel, and 100, 54.5, 40.0, and 100% for HIR plus the CD kernel. Conclusions: The HIR algorithm combined with the high-resolution kernel significantly improved diagnostic performance in the detection of in-stent stenosis.

  13. Geomechanical Facies Concept In Fractured Resevoirs and the Application of Hybrid Numerical and Analytical Techniques for the Description of Coupled Transport In Fractured Systems

    Science.gov (United States)

    McDermott, C. I.; Wenqing, W.; Kolditz, O.

    2009-04-01

    Exploiting and geo-engineering of fractured rocks in the context of reservoir storage and utilisation is important to applications such as hydrogeology, petroleum geology, geothermal energy, nuclear waste storage and CO2-sequestration. Understanding fluid, mass and energy transport in the three dimensional fracture network is critical to the evaluation planned operating efficiency. Hydraulic, thermal, mechanical and chemical coupled processes under the typical reservoir conditions operate at different scales. Depending on whether the process is continuum dominated (e.g. transfer of stress in the rock body) or discontinuity dominated (e.g. hydraulic transport processes) different methods of numerically investigating and quantifying the system can be applied. A geomechanical facies approach provides the basis for large scale numerical analysis of the coupled processes and prediction of system response. It also provides the basis for a three dimensional holistic understanding of the reservoir systems and the appropriate investigation techniques which could be used to evaluate the capacities of the reservoirs to be investigated as well as appropriate development techniques. Concentrating on the numerical modelling there is often a difficult balance between the numerical stability criteria of the different equation systems which need to be solved to describe the interaction of the dominant processes. The introduction of analytical solutions where possible, functional dependencies and multiple meshes provides on the framework of the geo-mechanical facies concept provides an efficient and stable method for the prediction of the effect of the in situ coupling.

  14. 基于混合建模技术的复合肥养分含量MIMO软测量模型%MIMO Soft-sensor Model of Nutrient Content for Compound Fertilizer Based on Hybrid Modeling Technique

    Institute of Scientific and Technical Information of China (English)

    傅永峰; 苏宏业; 褚健

    2007-01-01

    In compound fertilizer production, several quality variables need to be monitored and controlled simultaneously. It is very difficult to measure these variables on-line by existing instruments and sensors. So, soft-sensor technique becomes an indispensable method to implement real-time quality control. In this article, a new model of multi-inputs multi-outputs (MIMO) soft-sensor, which is constructed based on hybrid modeling technique, is proposed for these interactional variables. Data-driven modeling method and simplified first principle modeling method are combined in this model. Data-driven modeling method based on limited memory partial least squares (LM-PLS) algorithm is used to build soft-senor models for some secondary variables; then, the simplified first principle model is used to compute three primary variables on line. The proposed model has been used in practical process; the results indicate that the proposed model is precise and efficient, and it is possible to realize on line quality control for compound fertilizer process.

  15. Three independent techniques localize expression of transcript afp-11 and its bioactive peptide products to the paired AVK neurons in Ascaris suum: in situ hybridization, immunocytochemistry, and single cell mass spectrometry.

    Science.gov (United States)

    Jarecki, Jessica L; Viola, India R; Andersen, Kari M; Miller, Andrew H; Ramaker, Megan A; Vestling, Martha M; Stretton, Antony O

    2013-03-20

    We utilized three independent techniques, immunocytochemistry (ICC), single cell mass spectrometry (MS), and in situ hybridization (ISH), to localize neuropeptides and their transcripts in the nervous system of the nematode Ascaris suum . AF11 (SDIGISEPNFLRFa) is an endogenous peptide with potent paralytic effects on A. suum locomotory behavior. A highly specific antibody to AF11 showed robust immunostaining for AF11 in the paired AVK neurons in the ventral ganglion. We traced the processes from the AVK neurons into the ventral nerve cord and identified them as ventral cord interneurons. MS and MS/MS of single dissected AVKs detected AF11, two previously characterized peptides (AF25 and AF26), seven novel sequence-related peptides, including several sharing a PNFLRFamide C-terminus, and peptide NY, a peptide with an unrelated sequence. Also present in a subset of AVKs was AF2, a peptide encoded by the afp-4 transcript. By sequencing the afp-11 transcript, we discovered that it encodes AF11, all the AF11-related peptides detected by MS in AVK, and peptide NY. ISH detected the afp-11 transcript in AVK neurons, consistent with other techniques. ISH did not detect afp-11 in the ALA neuron, although both ICC and MS found AF11 in ca. 30% of ALAs. All 10 AF11-related peptides reduced acetylcholine-induced muscle contraction, but they differed in their rate of reversal of inhibition after removal of the peptide.

  16. 饲草高梁杂交种吉草3号的选育及栽培技术%Breeding and Cultivation Technique of Forage Sorghum Hybrid of Jicao 3

    Institute of Scientific and Technical Information of China (English)

    李继洪; 李淑杰; 胡喜连; 陈冰嬬; 高士杰

    2012-01-01

    Jicao 3 is one kind of forage sorghum hybrid crossed by Institute of Crop Breeding, Jilin Academy of Agricultural Sciences in 2004. Jicao 3 was examined and approved by National Sorghum Varieties Identification Committee in February, 2012. The hybrid has some features of fast growth rate, strong regeneration ability and adaptability, high biological yield and nutritional value. It was not only fine quality forage of bovine, goat, fish, rabbit and goose and so on, but also elite grass seed to improve ecological environment. In order to promote the development of animal husbandry in China and increase the feed source for the development of herbivorous animals, the breeding and cultivation techniques of Jicao 3 were studied and concluded.%吉草3号是吉林省农业科学院作物育种研究所于2004年组配而成的饲草高粱新品种。2012年2月通过国家高粱品种鉴定委员会鉴定。该杂交种具有生长速度快、再生能力强、生物产量高、营养价值高、适应性强、适口性好等特点,是牛、羊、鱼、兔、鹅等动物的优质饲草,也是改善生态环境的优良草种。为了促进我国畜牧业的发展,并为我国草食畜养殖业的发展增加饲料来源,对饲草高梁新品种吉草3号的选育及栽培技术进行了研究与总结。

  17. Advances in the study of hybrid finite elements

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Some new concepts and research progress in hybrid finite elements advanced in recent years are in troduced. On the basis of incompatible energy consistency analysis, the optimal condition of hybrid elements is derived and the formulation for fulfilling this condition is given. A post-processing penalty equilibrium optimization technique of hybrid element is presented to create high quality hybrid model. For incompressible problems, a method of deviatoric hybrid element is proposed and unification of computation between compressible and incompressible media is achieved.

  18. Application of Genomic In Situ Hybridization in Horticultural Science

    Directory of Open Access Journals (Sweden)

    Fahad Ramzan

    2017-01-01

    Full Text Available Molecular cytogenetic techniques, such as in situ hybridization methods, are admirable tools to analyze the genomic structure and function, chromosome constituents, recombination patterns, alien gene introgression, genome evolution, aneuploidy, and polyploidy and also genome constitution visualization and chromosome discrimination from different genomes in allopolyploids of various horticultural crops. Using GISH advancement as multicolor detection is a significant approach to analyze the small and numerous chromosomes in fruit species, for example, Diospyros hybrids. This analytical technique has proved to be the most exact and effective way for hybrid status confirmation and helps remarkably to distinguish donor parental genomes in hybrids such as Clivia, Rhododendron, and Lycoris ornamental hybrids. The genome characterization facilitates in hybrid selection having potential desirable characteristics during the early hybridization breeding, as this technique expedites to detect introgressed sequence chromosomes. This review study epitomizes applications and advancements of genomic in situ hybridization (GISH techniques in horticultural plants.

  19. Landmarks in Hybrid Planning

    Directory of Open Access Journals (Sweden)

    Mohamed Elkawkagy

    2013-11-01

    Full Text Available Although planning techniques achieved a significant progress during recent years, solving many planning problem still difficult even for modern planners. In this paper, we will adopt landmark concept to hybrid planning setting - a method that combines reasoning about procedural knowledge and causalities. Land-marks are a well-known concept in the realm of classical planning. Recently, they have been adapted to hierarchical approaches. Such landmarks can be extracted in a pre-processing step from a declarative hierarchical planning domain and problem description. It was shown how this technique allows for a considerable reduction of the search space by eliminating futile plan development options before the actual planning. Therefore, we will present a new approach to in¬tegrate landmark pre-processing technique in the context of hierarchical planning with landmark technique in the classical planning. This integration allows to incorporate the ability of using extracted landmark tasks from hierarchical domain knowledge in the form of HTN and using landmark literals from classical planning. To this end, we will construct a transformation technique to transform the hybrid planning domain into a classical domain model. The method¬ologies in this paper have been implemented successfully, and we will present some experimental results that give evidence for the consid-erable performance increase gained through planning system.

  20. Hybrid soft computing approaches research and applications

    CERN Document Server

    Dutta, Paramartha; Chakraborty, Susanta

    2016-01-01

    The book provides a platform for dealing with the flaws and failings of the soft computing paradigm through different manifestations. The different chapters highlight the necessity of the hybrid soft computing methodology in general with emphasis on several application perspectives in particular. Typical examples include (a) Study of Economic Load Dispatch by Various Hybrid Optimization Techniques, (b) An Application of Color Magnetic Resonance Brain Image Segmentation by ParaOptiMUSIG activation Function, (c) Hybrid Rough-PSO Approach in Remote Sensing Imagery Analysis,  (d) A Study and Analysis of Hybrid Intelligent Techniques for Breast Cancer Detection using Breast Thermograms, and (e) Hybridization of 2D-3D Images for Human Face Recognition. The elaborate findings of the chapters enhance the exhibition of the hybrid soft computing paradigm in the field of intelligent computing.

  1. Planting Performance and High-yielding Cultivation Techniques of Hybrid Rice Combination Yiyou 673 in Anxi Country%优质超级稻宜优673在安溪种植表现及高产栽培技术

    Institute of Scientific and Technical Information of China (English)

    肖全省

    2014-01-01

    Yiyou 673, derived from the CMS line Yixiang 1A and a restorer line Fuhui 673, was a new hybrid rice combination developed by Rice Research Institute, Fujian Academy of Agricultural Sciences. It was registered and released in 2006 in Fujian province. Yiyou 673 was introduced and planted in Anxi county of Fujian province for extensive adaptability, rice quality, high and stable yield. In this paper, we introduced planting performance and high-yielding cultivation techniques of Yiyou 673.%宜优673是福建省农业科学院水稻研究所用不育系宜香1A与恢复系福恢673配组而成的三系杂交水稻品种,于2006年通过福建省品种审定。在安溪县种植表现丰产、稳产、米质优、后期转色好等特点。介绍了宜优673在安溪县种植表现及高产栽培技术。

  2. 两系杂交稻株两优22特征特性与栽培技术%Characteristics and Cultivation Techniques of Two-line Hybrid Rice Zhuliangyou 22

    Institute of Scientific and Technical Information of China (English)

    夏品蒲

    2015-01-01

    Zhuliangyou 22 is a two-line indica hybrid rice variety and released by the nation in 2012. It was planted as double cropping early rice at Fuding city, exhibiting the characteristics of moderate growth duration, high yield, suitable plant type, tolerant fertilizer, resistant lodging, and strong resistant disease. The cultivation techniques at Fuding city mainly included: timely sowing and fostering robust seedling, rational transplanting density with sufficient basic seedling, applying sufficient base fertilizer and formula fertilization, scientific water management, and comprehensive control of pests and diseases.%株两优22是籼型两系杂交水稻品种,2012年通过国家品种审定。在福鼎市作双季早稻种植,表现生育期适中、丰产性好、耐肥抗倒、抗病性较强等特点。总结了其在福鼎作双季早稻种植表现及高产栽培技术。

  3. Demonstration experiment of nutrient formula fertilization technique on super hybrid rice%超级杂交稻营养套餐施肥技术示范试验报告

    Institute of Scientific and Technical Information of China (English)

    沈静; 张文波; 杨树祥; 余根德; 陈绍荣; 白云飞; 白周荣

    2012-01-01

    介绍超级杂交水稻应用营养套餐施肥技术和示范试验结果,667m2产量达到867.17kg,比常规施肥对照区增产34.41%。主要增产因素是施用了高效优化的高科技肥料——含硅、锌养分的腐植酸复合肥和高效叶面肥,充分满足了水稻超高产栽培的营养需求。%The application of nutrient formula fertilization technique and the results of demonstration experiment are introduced: the yield of super hybrid rice is 867.17 kg every 667 m2, with the yield increase by 34.41% compared with the conventional fertilization. The main factors of yield increase are the applications of efficient optimization high-tech fertilizer: humic acid compound fertilizer containing silicon and zinc, and high active foliar fertilizer, which can fully meet nutrient demand of the super-high-yield rice.

  4. Planting Performance and High-yielding Cultivation Techniques for Hybrid Rice Combination Shenliangyou 862 at Yong,an City%深两优862在永安市种植表现与高产栽培技术

    Institute of Scientific and Technical Information of China (English)

    林增贵

    2016-01-01

    深两优862是由江苏明天种业科技有限公司、南昌穗民农业科技有限公司、临湘市兆农科技研发中心,用深08S与R5662配组育成的杂交水稻新品种。具有长势旺,分蘖力强,成穗率高,有效穗多,高产稳产,米质优等特点。介绍深两优862在永安市种植表现与高产栽培技术。%A new hybrid rice combination Shenliangyou 862 derived from the cross of a sterile line Shen 08S and a restorer line R5662 was developed by Jiangsu Mingtian Seed Science and Technology Co., Ltd, Nan-chang Suimin Agricultural Science and Technology Co., Ltd and Linxiang Zhaonong Science and Technology Research and Development Center. It showed the characteristics of vigorous growth, strong tillering ability, high earbearing tiller percentage, more effective panicle number, high and stable yield, and good quality. Planting performance and high-yielding cultivation techniques for Shenliangyou 862 at Yong,an city was in-troduced in this paper.

  5. Phoxonic Hybrid Superlattice.

    Science.gov (United States)

    Alonso-Redondo, Elena; Huesmann, Hannah; El Boudouti, El-Houssaine; Tremel, Wolfgang; Djafari-Rouhani, Bahram; Butt, Hans-Juergen; Fytas, George

    2015-06-17

    We studied experimentally and theoretically the direction-dependent elastic and electromagnetic wave propagation in a supported film of hybrid PMMA (poly[methyl-methacrylate])-TiO2 superlattice (SL). In the direction normal to the layers, this one-dimensional periodic structure opens propagation band gaps for both hypersonic (GHz) phonons and near-UV photons. The high mismatch of elastic and optical impedance results in a large dual phoxonic band gap. The presence of defects inherent to the spin-coating fabrication technique is sensitively manifested in the band gap region. Utilizing Brillouin light scattering, phonon propagation along the layers was observed to be distinctly different from propagation normal to them and can, under certain conditions (SL thickness and substrate elasticity), reveal the nanomechanical properties of the constituent layers. Besides the first realization of unidirectional phoxonic behavior, hybrid (soft-hard) periodic materials are a promising simple platform for opto-acoustic interactions and applications such as filters and Bragg mirrors.

  6. 一站式杂交技术在治疗复杂型主动脉缩窄中的应用%One-stage hybrid technique in the management of complicated aortic coarctation

    Institute of Scientific and Technical Information of China (English)

    王亮; 常谦; 田川; 魏以桢; 韩超; 裴华伟

    2014-01-01

    Objective To evaluate the effective of one-stage hybrid technique in the management of complicated aortic coarctation in adolescents and adults .Methods To analysis 15 adolescents and adults retrospectively with complicated aortic coarctation from January 2011 to September 2013 in the aortic surgery center of Fuwai hospital .They were all male and the average age was 26.93 ±9.84 ( 13-46 ) years old .They were all operated in one-stage in the hybrid operation room , and balloon-expandable stents were transplanted firstly .Then surgeries were operated sternotomy through cardiopulmonary bypass ( CPB ) .Results All the procedures were completed successfully ,as 7 Bentall procedures ( include 1 semi-arch replacement and 1 mitral valve replacement ) , 4 aortic valve replacements , 1 mitral valve replacement , 2 mitral valve repairs , and 1 VSD repair were operated simultaneously .The average blood pressure drop of upper and lower limbs was ( 8.67 ±4.81 ) mm Hg post-operation.The CPB duration was (67.38 ±19.67 ) min and the length of ICU stay was (42.35 ±24.89 ) h.The average length of stents was (37.29 ±3.34 ) mm.During in-hospital and follow up (3-24 months),there were no complications .Conclusions It is secure and effective of one-stage hybrid technique in the management of complicated aortic coarctation in the adolescents and adults for the satisfactory in-hospital and follow up results ,but further follow up is needed for the late results .%目的探讨一站式杂交技术( one-stage hybrid technique )治疗合并其他心血管疾病的复杂型主动脉缩窄的临床应用价值。方法回顾性分析2011年1月至2013年9月阜外医院血管外科中心收治的复杂型主动脉缩窄15例,均为男性,平均(26.93±9.84)岁(13~46岁)。全部患者均在杂交手术室一期完成手术,先经股动脉置入球囊扩张支架,然后正中开胸,常规体外循环下行Bentall等手术。结果15例手术均成功完

  7. Symmetry reduction for stochastic hybrid systems

    NARCIS (Netherlands)

    Bujorianu, L.M.; Katoen, J.P.

    2009-01-01

    This paper is focused on adapting symmetry reduction, a technique that is highly successful in traditional model checking, to stochastic hybrid systems. We first show that performability analysis of stochastic hybrid systems can be reduced to a stochastic reachability analysis (SRA). Then, we genera

  8. Symmetry Reduction For Stochastic Hybrid Systems

    NARCIS (Netherlands)

    Bujorianu, L.M.; Katoen, J.P.

    2008-01-01

    This paper is focused on adapting symmetry reduction, a technique that is highly successful in traditional model checking, to stochastic hybrid systems. To that end, we first show that performability analysis of stochastic hybrid systems can be reduced to a stochastic reachability analysis (SRA). Th

  9. Statistical Model Checking for Stochastic Hybrid Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Du, Dehui; Larsen, Kim Guldstrand

    2012-01-01

    This paper presents novel extensions and applications of the UPPAAL-SMC model checker. The extensions allow for statistical model checking of stochastic hybrid systems. We show how our race-based stochastic semantics extends to networks of hybrid systems, and indicate the integration technique ap...

  10. SMRT交直分网混合实时仿真接口关键技术与实现%Key Techniques and Implementation of SMRT Hybrid Real-time Simulation Employing AC/DC Partitioning Scheme

    Institute of Scientific and Technical Information of China (English)

    张树卿; 童陆园; 郭琦; 李伟; 欧开健; 胡云

    2015-01-01

    Based on super mixed real-time simulation ( SMRT) , which interfaces real-time digital simulation ( RTDS) and digital com-puter, this paper presents the architecture design and basic implementation, and the difficulties and key techniques for utilization of hy-brid simulation in AC and DC power system. Key techniques on how to smoothly interface the electromagnetic and electromechanical tran-sient simulation modes are studied and described in detail, including stability analysis and stabilizing method for the computational sys-tem. practical equivalent interface impedance in low frequency band, leading estimation of interface states based interface and interaction protocol, asymmetric interface method by three-sequence current injection, and three-sequence fundamental power calculation with close-loop auto calibration correction. Finally, the overall scheme and key techniques are verified by case analysis. More tests and practices have proven that SMRT basically meets the requirement of synthesis transient processes simulation of large AC and DC power system.%基于实时数字仿真( real-time digital simulation, RTDS)和数字计算机接口的电磁暂态、机电暂态混合实时仿真( super mixed real-time simulation, SMRT),深入阐述了电磁暂态、机电暂态两种模式的仿真平滑接口的关键技术,包括接口交互系统稳定性分析与稳定方法、实用低频段接口等效阻抗、基于超前估算的接口交互方法、三序分立电流注入不对称接口方法和闭环自校正三序基波功率计算方法。案例分析和方案整体验证证明SMRT已基本满足交直流大系统暂态综合过程仿真分析的需求。

  11. Photochromic mesoporous hybrid coatings

    Science.gov (United States)

    Raboin, L.; Matheron, M.; Gacoin, T.; Boilot, J.-P.

    2008-09-01

    Spirooxazine (SO) photochromic molecules were trapped in sol-gel matrices. In order to increase the colourability and improve mechanical properties of sol-gel photochromic films, we present an original strategy in which SO photochromic molecules were dispersed in mesoporous organized films using the impregnation technique. Well-ordered organosilicate mesoporous coatings with the 3D-hexagonal symmetry were prepared by the sol-gel technique. These robust mesoporous films, which contain high amounts of hydrophobic methyl groups at the pore surface, offer optimized environments for photochromic dyes dispersed by impregnation technique. After impregnation by a spirooxazine solution, the photochromic response is only slightly slower when compared with mesostructured or soft sol-gel matrices, showing that mesoporous organized hybrid matrix are good host for photochromic dyes. Moreover, the molecular loading in films is easily adjustable in a large range using multi-impregnation procedure and increasing the film thickness leading to coatings for optical switching devices.

  12. 荧光原位杂交技术在肾盂肿瘤诊断中的应用%Detection of renal pelvic tumor using fluorescence in situ hybridization technique

    Institute of Scientific and Technical Information of China (English)

    陈文轩; 林毅; 郭洪波; 李黎明

    2010-01-01

    目的 评价荧光原位杂交(FISH)技术在肾盂肿瘤诊断中的应用价值.方法 20例健康人通过FISH技术检测3、7、17号染色体及9号染色体p16位点的变异情况,建立阚值.15例影像学提示肾脏占位的血尿患者留取晨尿,分别进行尿脱落细胞学检查和FISH技术检测.以至少两种探针检测结果超过阈值或一种探针检测结果存在至少两种异常为诊断阳性.结果 15例血尿患者经手术及病理证实肾盂尿路上皮癌8例,肾透明细胞癌5例,肾嫌色细胞癌1例,黄色肉芽肿性肾盂肾炎1例.8例肾盂尿路上皮癌FISH技术检测均为阳性,3、7、17号染色体畸变阳性率均为100%(8/8),9号染色体p16位点畸变阳性率为75%(6/8).尿脱落细胞学检查仅1例阳性.7例非肾盂尿路上皮癌6例FISH技术检测阴性,而尿脱落细胞学检查则均为阴性.结论 FISH技术是一种无创快速诊断方法,在肾盂肿瘤诊断中优于尿脱落细胞学检查.%Objective To investigate the feasibihty and effectiveness of the fluorescence in situ hybridization(FISH)technique in the diagnosis of renal pelvic tumor.Methods FISH technique were used to detect the abnormalities of chromosome 3,7,17 and 9 p16 from 20 people without malignancy.The morning's first urine were availahled from 15 patients with hematuria and suspected of renal mass by imaging,then were studied by FISH technique and urine cytology respectively.The sample was considered positive if two or more probes results were higher than the criteria,or one probe had two or more abnormal results.Results Eight of 15 patients with hematuria were renal pelvic urothehal carcinoma,5 were renal clear cell carcinoma,1 was renal chromophobe cell carcinoma,1 was xanthogranulomatous pyelonephritis,confirmed by pathology.All of the 8 renal pelvic carcinoma were considered positive by FISH technique,while only 1 was considered positive by urine cytology.The variation rate of chromosome 3,7,17 were 100%(8/8)and

  13. Hybrid Techniques for Optimizing Complex Systems

    Science.gov (United States)

    2009-12-01

    the difficulty of solving GSD, researchers have developed heuristic methods typically based on slow Monte Carlo simulations. However, because of the...computation with probabilistic quantum gates,” Physical Review Letters, 95:080503, 2005. 106. D. Gottesman, “The Heisenberg representation of quantum

  14. Hybrid Techniques for Quantum Circuit Simulation

    Science.gov (United States)

    2014-02-01

    15 Figure 10. (a) Ripple-carry (Cuccaro) adder for 3...bit numbers [17]. (b) Average runtime and memory needed by Quipu and QuIDDPro (QPLite) to simulate -bit Cuccaro adders ...b) scaled adder , (c) binary-to- stochastic converter, and (d) stochastic-to-binary converter

  15. Hybrids of sugar pine by embryo culture

    Science.gov (United States)

    E. C. Stone; J. W. Duffield

    1950-01-01

    A modified embryo culture technique was used to facilitate germination of seed obtained after pollinating sugar pine with pollen from blister rust- resistant Armand and Korean pines. Resulting seedlings appear to be hybrids.

  16. Inference in hybrid Bayesian networks

    DEFF Research Database (Denmark)

    Lanseth, Helge; Nielsen, Thomas Dyhre; Rumí, Rafael

    2009-01-01

    Since the 1980s, Bayesian Networks (BNs) have become increasingly popular for building statistical models of complex systems. This is particularly true for boolean systems, where BNs often prove to be a more efficient modelling framework than traditional reliability-techniques (like fault trees...... decade's research on inference in hybrid Bayesian networks. The discussions are linked to an example model for estimating human reliability....

  17. Comparative genomic hybridization: practical guidelines.

    NARCIS (Netherlands)

    Jeuken, J.W.M.; Sprenger, S.H.; Wesseling, P.

    2002-01-01

    Comparative genomic hybridization (CGH) is a technique used to identify copy number changes throughout a genome. Until now, hundreds of CGH studies have been published reporting chromosomal imbalances in a large variety of human neoplasms. Additionally, technical improvements of specific steps in a

  18. One-pot preparation of silica-supported hybrid immobilized metal affinity adsorbent with macroporous surface based on surface imprinting coating technique combined with polysaccharide incorporated sol--gel process.

    Science.gov (United States)

    Li, Feng; Li, Xue-Mei; Zhang, Shu-Sheng

    2006-10-06

    A simple and reliable one-pot approach using surface imprinting coating technique combined with polysaccharide incorporated sol-gel process was established to synthesize a new organic-inorganic hybrid matrix possessing macroporous surface and functional ligand. Using mesoporous silica gel being a support, immobilized metal affinity adsorbent with a macroporous shell/mesoporous core structure was obtained after metal ion loading. In the prepared matrix, covalently bonded coating and morphology manipulation on silica gel was achieved by using one-pot sol-gel process starting from an inorganic precursor, -glycidoxypropyltrimethoxysiloxane (GPTMS), and a functional biopolymer, chitosan (CS) at the atmosphere of imprinting polyethylene glycol (PEG). Self-hydrolysis of GPTMS, self-condensation, and co-condensation of silanol groups (Si-OH) from siloxane and silica gel surface, and in situ covalent cross-linking of CS created an orderly coating on silica gel surface. PEG extraction using hot ammonium hydroxide solution gave a chemically and mechanically stabilized pore structure and deactivated residual epoxy groups. The prepared matrix was characterized by using X-ray energy dispersion spectroscopy (EDX), scanning electron microscopy (SEM) and mercury intrusion porosimetry. The matrix possessed a high capacity for copper ion loading. Protein adsorption performance of the new immobilized metal affinity adsorbent was evaluated by batch adsorption and column chromatographic experiment using bovine serum albumin (BSA) as a simple model protein. Under the optimized coating conditions, the obtained macroporous surface resulted in a fast kinetics and high capability for protein adsorption, while the matrix non-charged with metal ions offered a low non-specific adsorption.

  19. Hybrid Gear

    Science.gov (United States)

    Handschuh, Robert F. (Inventor); Roberts, Gary D. (Inventor)

    2016-01-01

    A hybrid gear consisting of metallic outer rim with gear teeth and metallic hub in combination with a composite lay up between the shaft interface (hub) and gear tooth rim is described. The composite lay-up lightens the gear member while having similar torque carrying capability and it attenuates the impact loading driven noise/vibration that is typical in gear systems. The gear has the same operational capability with respect to shaft speed, torque, and temperature as an all-metallic gear as used in aerospace gear design.

  20. Hybrid Qualifications

    DEFF Research Database (Denmark)

    has turned out as a major focus of European education and training policies and certainly is a crucial principle underlying the European Qualifications Framework (EQF). In this context, «hybrid qualifications» (HQ) may be seen as an interesting approach to tackle these challenges as they serve «two...... masters», i.e. by producing skills for the labour market and enabling individuals to progress more or less directly to higher education. The specific focus of this book is placed on conditions, structures and processes which help to combine VET with qualifications leading into higher education...

  1. Intuitionistic hybrid logic

    DEFF Research Database (Denmark)

    Braüner, Torben

    2011-01-01

    Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area.......Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area....

  2. Continuity Controlled Hybrid Automata

    OpenAIRE

    Bergstra, J. A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of hybrid automata as timed transition systems. We also relate the synchronized product operator on hybrid automata to the parallel composition operator of the process algebra. It turns out that the f...

  3. Application of Wind-solar Hybrid Technique and HB LED in Highway Tunnel Lighting%风光互补技术及高亮LED系统在公路隧道照明中的应用

    Institute of Scientific and Technical Information of China (English)

    赵忠杰; 陈广交; 赵亮

    2012-01-01

    针对中短隧道照明设计中缺少供电来源的难题,采用风光互补技术太阳能供电系统,合理利用现有资源,保障隧道机电建设及运营中正常照明.该系统通过结合风光混合发电技术,利用太阳能光伏发电,对隧道内的高亮LED照明系统进行供电.这2套系统相互结合,无需直流向交流转化,从而大大节省了能源损失;并通过合理的改良设计,对蓄电池充放电模块和高亮LED外围电路节能深入研究,改变传统电能转化中的能量损失和照明光转换率.确保蓄电池长时间放电和高亮LED照明系统的低能损耗,即使在恶劣环境下整套系统也能安全稳定运转.系统对现有的太阳能供电关键技术进行改良和工程细节微调,同时对灯具布局进行调整,提高整个照明系统的工作时间,真正达到经济节能的目的.%In order to solve the problem of power-source shortage in lighting design for middle and short tunnels, the solar power supply system based on wind-solar hybrid technique was used for tunnel lighting, which could both rely on rational utilization of available resources and ensure the tunnel construction and operation lighting. With the wind-solar hybrid power generation technology, the solar photovoltaic power generation was used for High-Brightness LED lighting in tunnels. This two-system combining sets, in which DC to AC transformation is unnecessary, could greatly avoid energy loss. After researching on the energy saving of storage battery charging and discharging module as well as HB LED peripheral circuit, the energy loss status in traditional energy conversion and lighting conversion rate were improved. The battery's long time discharge and low loss of the HB LED system could ensure safety and stability of the tunnel operation even in harsh environments. The system improved the solar-powered key technology and fine-tuned the details of the construction, meanwhile flexibility adjusted the layout of

  4. Hybrid cluster identification

    Science.gov (United States)

    Martín-Herrero, J.

    2004-10-01

    I present a hybrid method for the labelling of clusters in two-dimensional lattices, which combines the recursive approach with iterative scanning to reduce the stack size required by the pure recursive technique, while keeping its benefits: single pass and straightforward cluster characterization and percolation detection parallel to the labelling. While the capacity to hold the entire lattice in memory is usually regarded as the major constraint for the applicability of the recursive technique, the required stack size is the real limiting factor. Resorting to recursion only for the transverse direction greatly reduces the recursion depth and therefore the required stack. It also enhances the overall performance of the recursive technique, as is shown by results on a set of uniform random binary lattices and on a set of samples of the Ising model. I also show how this technique may replace the recursive technique in Wolff's cluster algorithm, decreasing the risk of stack overflow and increasing its speed, and the Hoshen-Kopelman algorithm in the Swendsen-Wang cluster algorithm, allowing effortless characterization during generation of the samples and increasing its speed.

  5. Hybridized tetraquarks

    Directory of Open Access Journals (Sweden)

    A. Esposito

    2016-07-01

    Full Text Available We propose a new interpretation of the neutral and charged X,Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules but rather a manifestation of the interplay between the two. While meson molecules need a negative or zero binding energy, its counterpart for h-tetraquarks is required to be positive. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs0π± channel by the D0 Collaboration and the negative result presented subsequently by the LHCb Collaboration are understood in this scheme, together with a considerable portion of available data on X,Z particles. Considerations on a state with the same quantum numbers as the X(5568 are also made.

  6. Hybridized Tetraquarks

    CERN Document Server

    Esposito, A.; Polosa, A.D.

    2016-01-01

    We propose a new interpretation of the neutral and charged X, Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules. The latter would require a negative or zero binding energy whose counterpart in h-tetraquarks is a positive quantity. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs pi+- channel by the D0 collaboration and the negative result presented subsequently by the LHCb collaboration are understood in this scheme, together with a considerable portion of available data on X, Z particles. Considerations on a state with the same quantum numbers as the X(5568) are also made.

  7. Next-generation hybridization and introgression

    Science.gov (United States)

    Twyford, A D; Ennos, R A

    2012-01-01

    Hybridization has a major role in evolution—from the introgression of important phenotypic traits between species, to the creation of new species through hybrid speciation. Molecular studies of hybridization aim to understand the class of hybrids and the frequency of introgression, detect the signature of ancient hybridization, and understand the behaviour of introgressed loci in their new genomic background. This often involves a large investment in the design and application of molecular markers, leading to a compromise between the depth and breadth of genomic data. New techniques designed to assay a large sub-section of the genome, in association with next-generation sequencing (NGS) technologies, will allow genome-wide hybridization and introgression studies in organisms with no prior sequence data. These detailed genotypic data will unite the breadth of sampling of loci characteristic of population genetics with the depth of sequence information associated with molecular phylogenetics. In this review, we assess the theoretical and methodological constraints that limit our understanding of natural hybridization, and promote the use of NGS for detecting hybridization and introgression between non-model organisms. We also make recommendations for the ways in which emerging techniques, such as pooled barcoded amplicon sequencing and restriction site-associated DNA tags, should be used to overcome current limitations, and enhance our understanding of this evolutionary significant process. PMID:21897439

  8. Breeding and Cultivation Techniques of Energy Sweet Sorghum Hybrid Tongtian%能源作物甜高粱杂交种通甜1号选育及栽培技术

    Institute of Scientific and Technical Information of China (English)

    李岩; 王振国; 李默; 呼瑞梅; 邓志兰; 崔凤娟; 徐庆全; 于春国

    2013-01-01

    Tongtian 1 is a Sweet sorghum hybrids, originating from Optional species: zhetian 112A as female parent and zhehui 145 as male parent. The hybrids high sugar content, High rate of juice, potential production, disease resistance, lodging resistance and wide adaptability. It’s an energy Sweet sorghum hybrid of silage type. Tongtian 1, a new Sweet sorghum hybrids developed by Tongliao Institute of Agricultural Sciences was approved by Inner Mongolia Variety Approval committee in May 2012. The Inner Mongolia examination sorghum hybrids No. 200912.%通甜1号是以自选不育系哲甜112A为母本,自选恢复系哲恢145为父本组配而成的能源甜高粱杂交种。该杂交种含糖量高,出汁率高,生产潜力大,抗病、抗倒伏,适应性强,是青贮型能源甜高粱杂交种。通甜1号是通辽市农科院培育的新品种,2012年5月通过了内蒙古自治区品种审定委员会审定,审定编号:蒙审粱2012009号。

  9. Model Reduction of Hybrid Systems

    DEFF Research Database (Denmark)

    Shaker, Hamid Reza

    systems are derived in this thesis. The results are used for output feedback control of switched nonlinear systems. Model reduction of piecewise affine systems is also studied in this thesis. The proposed method is based on the reduction of linear subsystems inside the polytopes. The methods which......High-Technological solutions of today are characterized by complex dynamical models. A lot of these models have inherent hybrid/switching structure. Hybrid/switched systems are powerful models for distributed embedded systems design where discrete controls are applied to continuous processes...... of hybrid systems, designing controllers and implementations is very high so that the use of these models is limited in applications where the size of the state space is large. To cope with complexity, model reduction is a powerful technique. This thesis presents methods for model reduction and stability...

  10. Continuity Controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  11. Continuity controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2008-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  12. 荧光原位杂交技术在膀胱癌诊断中的应用%Diagnosis of Bladder Cancer Using Fluorescence in Situ Hybridization Technique

    Institute of Scientific and Technical Information of China (English)

    陈文轩; 汤坤龙; 郭洪波; 彭杰; 林毅

    2011-01-01

    Objective To evaluate the value of using fluorescence in situ hybridization (FISH)technique for the detection of chromosome aberration of urine exfoliated cells for the diagnosis of bladder tumor.Methods FISH technique were used to detect the abnormalities of chromosome 3,7,17 and 9p16 site from 20 normal people, and to establish the threshold.The morning's first urinations were available from 75 patients with bladder cancer and 25 patients without urothelial tumor, then were detected using FISH technique and urine cytology respectively.The sample was considered positive if two or more probes results higher than the criteria,or one probe has two or more abnormal results.Results The sensitivity of single using were 73.3% (55/75),76.0% (57/75),62.7% (47/75) and 62.7% (47/75) for the 4 probes (3,7, 17 and 9p16)respectively.The sensitivity of combined detection was 85.3% (64/75) and specificity was 96.0% (24/25) The sensitivity and specificity of urine cytology examination was 9.3% (7/75) and 100% (25/25) .The sensitivity of FISH examination was significantly higher than that of urine cytology examination (85.3% vs 9.3% ,x2 = 57.00, P < 0.001) .Sensitivity of FISH examination was not correlated with cancer pathologic grading(low vs high : 84.2% vs 86.5%, x2 = 0.08, P > 0.05) and clinical stage (ta-tl : 82.9%, t2-t4 :87.5%, x2 = 0.32 ,P > 0.05) .Conclusion FISH technique is a non-invasive and effective method for the early diagnosis of bladder tumor and is more sensitive than urine cytology.Furthermore, FISH technique can be used to predict the tumor's biological behavivor and prognosis.%目的 探讨荧光原位杂交(FISH)检测尿脱落细胞染色体畸变在膀胱癌诊断中的临床应用价值。方法 采用3、7及17号染色体着丝粒特异性探针及9号染色体p16位点特异性探针对20名健康人(正常组)新鲜晨尿进行FISH检测,建立阈值。留取75例膀胱癌(膀胱癌组)患者和25例非膀胱癌

  13. Stochastic Reachability Analysis of Hybrid Systems

    CERN Document Server

    Bujorianu, Luminita Manuela

    2012-01-01

    Stochastic reachability analysis (SRA) is a method of analyzing the behavior of control systems which mix discrete and continuous dynamics. For probabilistic discrete systems it has been shown to be a practical verification method but for stochastic hybrid systems it can be rather more. As a verification technique SRA can assess the safety and performance of, for example, autonomous systems, robot and aircraft path planning and multi-agent coordination but it can also be used for the adaptive control of such systems. Stochastic Reachability Analysis of Hybrid Systems is a self-contained and accessible introduction to this novel topic in the analysis and development of stochastic hybrid systems. Beginning with the relevant aspects of Markov models and introducing stochastic hybrid systems, the book then moves on to coverage of reachability analysis for stochastic hybrid systems. Following this build up, the core of the text first formally defines the concept of reachability in the stochastic framework and then...

  14. Hybrid Laminates for Application in North Conditions

    Science.gov (United States)

    Antipov, V. V.; Oreshko, E. I.; Erasov, V. S.; Serebrennikova, N. Yu.

    2016-11-01

    A hybrid aluminum-lithium alloy/SIAL laminate as a possible material for application in structures operated in North conditions is considered. The finite-element method is used for a buckling stability analysis of hybrid panels, bars, and plates. A technique allowing one to compare the buckling stability of multilayered hybrid plates is offered. Compression tests were run on a hybrid laminate wing panel as a prototype of the top panel of TU-204SM airplane made from a high-strength B95T2 aluminum alloy. It turned out that the lighter composite panel had a higher load-carrying capacity than the aluminum one. Results of investigation into the properties the hybrid aluminum-lithium alloy/SIAL laminate and an analysis of scientific-technical data on this subject showed that this composite material could be used in the elements of airframes, including those operated in north conditions.

  15. Safety Verification for Probabilistic Hybrid Systems

    DEFF Research Database (Denmark)

    Zhang, Lijun; She, Zhikun; Ratschan, Stefan;

    2010-01-01

    The interplay of random phenomena and continuous real-time control deserves increased attention for instance in wireless sensing and control applications. Safety verification for such systems thus needs to consider probabilistic variations of systems with hybrid dynamics. In safety verification...... hybrid systems and develop a general abstraction technique for verifying probabilistic safety problems. This gives rise to the first mechanisable technique that can, in practice, formally verify safety properties of non-trivial continuous-time stochastic hybrid systems-without resorting to point...... of classical hybrid systems we are interested in whether a certain set of unsafe system states can be reached from a set of initial states. In the probabilistic setting, we may ask instead whether the probability of reaching unsafe states is below some given threshold. In this paper, we consider probabilistic...

  16. Safety Verification for Probabilistic Hybrid Systems

    DEFF Research Database (Denmark)

    Zhang, Lijun; She, Zhikun; Ratschan, Stefan;

    2012-01-01

    The interplay of random phenomena and continuous dynamics deserves increased attention, especially in the context of wireless sensing and control applications. Safety verification for such systems thus needs to consider probabilistic variants of systems with hybrid dynamics. In safety verification...... hybrid systems and develop a general abstraction technique for verifying probabilistic safety problems. This gives rise to the first mechanisable technique that can, in practice, formally verify safety properties of non-trivial continuous-time stochastic hybrid systems. Moreover, being based...... of classical hybrid systems, we are interested in whether a certain set of unsafe system states can be reached from a set of initial states. In the probabilistic setting, we may ask instead whether the probability of reaching unsafe states is below some given threshold. In this paper, we consider probabilistic...

  17. Recent Advances on Hybrid Intelligent Systems

    CERN Document Server

    Melin, Patricia; Kacprzyk, Janusz

    2013-01-01

    This book presents recent advances on hybrid intelligent systems using soft computing techniques for intelligent control and robotics, pattern recognition, time series prediction and optimization of complex problems. Soft Computing (SC) consists of several intelligent computing paradigms, including fuzzy logic, neural networks, and bio-inspired optimization algorithms, which can be used to produce powerful hybrid intelligent systems. The book is organized in five main parts, which contain groups of papers around a similar subject. The first part consists of papers with the main theme of hybrid intelligent systems for control and robotics, which are basically state of the art papers that propose new models and concepts, which can be the basis for achieving intelligent control and mobile robotics. The second part contains papers with the main theme of hybrid intelligent systems for pattern recognition and time series prediction, which are basically papers using nature-inspired techniques, like evolutionary algo...

  18. Suppression subtractive hybridization.

    Science.gov (United States)

    Ghorbel, Mohamed T; Murphy, David

    2011-01-01

    Comparing two RNA populations that differ from the effects of a single independent variable, such as a drug treatment or a specific genetic defect, can establish differences in the abundance of specific transcripts that vary in a population dependent manner. There are different methods for identifying differentially expressed genes. These methods include microarray, Serial Analysis of Gene Expression (SAGE), and quantitative Reverse-Transcriptase Polymerase Chain Reaction (qRT-PCR). Herein, the protocol describes an easy and cost-effective alternative that does not require prior knowledge of the transcriptomes under examination. It is specifically relevant when low levels of RNA starting material are available. This protocol describes the use of Switching Mechanism At RNA Termini Polymerase Chain Reaction (SMART-PCR) to amplify cDNA from small amounts of RNA. The amplified cDNA populations under comparison are then subjected to Suppression Subtractive Hybridization (SSH-PCR). SSH-PCR is a technique that couples subtractive hybridization with suppression PCR to selectively amplify fragments of differentially expressed genes. The resulting products are cDNA populations enriched for significantly overrepresented transcripts in either of the two input RNAs. These cDNA populations can then be cloned to generate subtracted cDNA library. Microarrays made with clones from the subtracted forward and reverse cDNA libraries are then screened for differentially expressed genes using targets generated from tester and driver total RNAs.

  19. Hybrid and hierarchical composite materials

    CERN Document Server

    Kim, Chang-Soo; Sano, Tomoko

    2015-01-01

    This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous  and detailed examples and over 150 illustrations.   In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.

  20. Statistical Model Checking for Stochastic Hybrid Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Du, Dehui; Larsen, Kim Guldstrand

    2012-01-01

    This paper presents novel extensions and applications of the UPPAAL-SMC model checker. The extensions allow for statistical model checking of stochastic hybrid systems. We show how our race-based stochastic semantics extends to networks of hybrid systems, and indicate the integration technique...... applied for implementing this semantics in the UPPAAL-SMC simulation engine. We report on two applications of the resulting tool-set coming from systems biology and energy aware buildings....

  1. Fluorescence in situ hybridization(FISH) technique combined with karyotyping analysis in prenatal diagnosis%FISH技术在产前诊断中的应用价值研究

    Institute of Scientific and Technical Information of China (English)

    沈国松; 张甦; 何平亚; 方嵘

    2011-01-01

    目的 使用荧光原位杂交(FISH)技术对常见胎儿染色体数目异常进行快速诊断,结合羊水细胞培养染色体核型分析技术形成产前诊断体系,并对其临床应用价值进行评价.方法 应用诊断最常见染色体病的5种染色体(13、18、21、X和Y)特异性FISH探针对480例未经培养羊水细胞进行产前诊断,并和同时进行的羊水培养染色体核型分析相比较.结果 480例未经培养羊水细胞FISH实验全部获得检测结果,并发现21-三体综合征2例,18-三体综合征1例,克氏综合征1例,特纳综合征 1例,与羊水培养染色体分析结果一致,但报告时间(2至3d)与羊水染色体分析报告时间(2~3周)相比大为缩短.受固有技术限制有6例结构异常未能检出,但应用FISH技术对其中1例与性染色体有关的结构异常进行辅助诊断,获得了成功.结论 FISH技术在常见染色体数目异常产前诊断中应用行之有效,与羊水染色体核型分析技术相结合,将使产前诊断更加高效和安全.%To evaluate the clinical application of the combination of fluorescence in situ hybridization (FISH)technique and karyotyping analysis in prenatal diagnosis.MethodsFISH technology with the centromeric probes of chromo-some 13, 18, 21 ,X and Y was applied in 480 amniotic fluid specimens, the results were compared with those of the G banding karyotypes from standard cytogenetic analysis in cultured amniotic fluid cells.ResultsTotal 480 uncultured amniotic fluid speci-mens were successfully tested by FISH and two Down' s syndrome, one Edwards syndrome, one Klinefelter syndrome and one Turner syndrome were detected. The results obtained by FISH were consistent with those from karyotyping analysis. FISH (2-3 days) was faster than karyotyping(2-3 weeks) to get results. Karyotypes analysis detected 6 cases of chromosome structural abnormalities which were not detected by FISH, however, one of them with a sex chromosome-related structural

  2. Study on the diagnostic methodology on bacterial vaginosis with fluorescence in situ hybridization technique%荧光原位杂交技术诊断细菌性阴道病的方法学研究

    Institute of Scientific and Technical Information of China (English)

    吕治; 彭国丽; 王克迪; 苏建荣

    2015-01-01

    目的:建立荧光原位杂交技术诊断细菌性阴道病的方法,为细菌性阴道病的诊断和治疗提供准确的实验室依据。方法设计针对阴道加德纳菌、阴道阿托波菌、普雷沃菌、乳酸杆菌的荧光探针。对临床确诊的33例细菌性阴道病妇女,健康体检的28例健康妇女阴道分泌物涂片进行荧光原位杂交检测,建立积分标准。与 Nugent 评分标准进行比对评估。结果荧光原位杂交及积分评价标准对于细菌性阴道病的诊断敏感度、特异度、阳性预测值、阴性预测值和符合率分别为93.9%、96.4%、96.9%、93.1%和95.1%。结论荧光原位杂交方法较传统的实验室涂片染色方法更加客观反映阴道菌群的变化,是一种较 Nugent 评分更准确的细菌性阴道病实验室诊断方法。%Objective To establish an accurate laboratory method for clinical physicians to diagnose and treat bacterial vaginosis(BV)by using fluorescence in situ hybridization technique(FISH). Methods The application of fluorescent probes for detection of Gardnerella vaginalis ( Gv),Atopobium vaginae(Ato),Prevotella(Pre)and Lactobacillus(Lac)were carried out in examination of vaginal smears of 33 patients with bacterial vaginosis and 28 healthy women by using FISH;integral standard had been established and evaluated with Nugent scoring. Results The sensitivity,specificity,positive predictive value,negative predictive value and coincidence rate of FISH integral evaluation standard for diagnosis of bacterial vaginosis were 93. 9% ,96. 4% ,96. 9% ,93. 1% and 95. 1% respectively. Conclusion The integral evaluation standard of FISH is more objective than Nugent scoring method and it reflects the change in composition of vaginal bacteria flora,hence it is a kind of accurate laborato-ry method for diagnosis of bacterial vaginosis.

  3. Transmission electron microscopy of unstained hybrid Au nanoparticles capped with PPAA (plasma-poly-allylamine)

    DEFF Research Database (Denmark)

    Gontard, Lionel C.; Fernández, Asunción; Dunin-Borkowski, Rafal E.;

    2014-01-01

    Hybrid (organic shell-inorganic core) nanoparticles have important applications in nanomedicine. Although the inorganic components of hybrid nanoparticles can be characterized readily using conventional transmission electron microscopy (TEM) techniques, the structural and chemical arrangement of ...

  4. Development and characterization of interspecific hybrids between Oryza sativa and O. latifolia by in situ hybridization

    Institute of Scientific and Technical Information of China (English)

    YI ChuanDeng; TANG ShuZhu; ZHOU Yong; LIANG GuoHua; GONG ZhiYun; GU MingHong

    2008-01-01

    Oryza sativa and O. latifolia belong to the AA and CCDD genomes of Oryza, respectively. In this study, interspecific hybrids of these species were obtained using the embryo rescue technique. Hybrid pani-cle traits, such as long awns, small grain, exoteric large purple stigma, grain shattering and dispersed panicles, resemble that of the paternal parent, O. latifolia, whereas there is obvious heterosis in such respects as plant height, tillering ability and vegetative vigor. Chromosome pairing and the genomic components of the hybrid were subsequently investigated using genomic in situ hybridization (GISH) and fluorescent in situ hybridization (FISH) analysis. Based on the mitotic metaphase chromosome numbers of the root tips investigated, the hybrid is a triploid with 36 chromosomes. The genomic con-stitution of the hybrid is ACD. In the meiotic metaphase I of the hybrid pollen mother cell, poor chro-mosome pairing was identified and most of the chromosomes were univalent, which resulted in com-plete male sterility in the hybrid.

  5. From hybrid swarms to swarms of hybrids

    Science.gov (United States)

    The introgression of modern humans (Homo sapiens) with Neanderthals 40,000 YBP after a half-million years of separation, may have led to the best example of a hybrid swarm on earth. Modern trade and transportation in support of the human hybrids has continued to introduce additional species, genotyp...

  6. The Hybrid Museum: Hybrid Economies of Meaning

    DEFF Research Database (Denmark)

    Vestergaard, Vitus

    2013-01-01

    this article shows that there are two different museum mindsets where the second mindset leans towards participatory practices. It is shown how a museum can support a hybrid economy of meaning that builds on both a user generated economy of meaning and an institutional economy of meaning and adds value to both....... Such a museum is referred to as a hybrid museum....

  7. Hydraulic Hybrid Vehicles

    Science.gov (United States)

    EPA and the United Parcel Service (UPS) have developed a hydraulic hybrid delivery vehicle to explore and demonstrate the environmental benefits of the hydraulic hybrid for urban pick-up and delivery fleets.

  8. Hybrid Management in Hospitals

    DEFF Research Database (Denmark)

    Byrkjeflot, Haldor; Jespersen, Peter Kragh

    2010-01-01

    Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer......Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer...

  9. Resin Catalyst Hybrids

    Institute of Scientific and Technical Information of China (English)

    S. Asaoka

    2005-01-01

    @@ 1Introduction: What are resin catalyst hybrids? There are typically two types of resin catalyst. One is acidic resin which representative is polystyrene sulfonic acid. The other is basic resin which is availed as metal complex support. The objective items of this study on resin catalyst are consisting of pellet hybrid, equilibrium hybrid and function hybrid of acid and base,as shown in Fig. 1[1-5].

  10. Mesoscale hybrid calibration artifact

    Science.gov (United States)

    Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  11. Preparation and Characterization of Organic/Inorganic Hybrid Nanofibers

    Institute of Scientific and Technical Information of China (English)

    WU Ning; WEI Qu-fu; LI Qi; XU Wen-zheng

    2006-01-01

    A new class of nanocomposites based on organic and inorganic species integrated at a nanoscale has obtained more attention these years. Organic-inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance. In this work, PVAc/TiO2 organicinorganic hybrid was prepared by sol-gel process. Electrospinning technique was used to fabricate PVAc/TiO2hybrid nanofibers. The structures and properties of the hybrid nanofibers were characterized by Scanning Electron Microscopy (SEM), Atomic Force Microscope (AFM),Differential Scanning Calorimeter (DSC) and Fouriertransform infrared (FTIR) spectra. SEM and AFM were employed to study the topography of the hybrid nanofibers.The chemical structure of the hybrid nanofibers were examined by FTIR. The DSC scansrevealed the second order transition temperature of the hybrid materials were higher than PVAc.

  12. Realizing the Hybrid Library.

    Science.gov (United States)

    Pinfield, Stephen; Eaton, Jonathan; Edwards, Catherine; Russell, Rosemary; Wissenburg, Astrid; Wynne, Peter

    1998-01-01

    Outlines five projects currently funded by the United Kingdom's Electronic Libraries Program (eLib): HyLiFe (Hybrid Library of the Future), MALIBU (MAnaging the hybrid Library for the Benefit of Users), HeadLine (Hybrid Electronic Access and Delivery in the Library Networked Environment), ATHENS (authentication scheme), and BUILDER (Birmingham…

  13. Homoploid hybrid expectations

    Science.gov (United States)

    Homoploid hybrid speciation occurs when a stable, fertile, and reproductively isolated lineage results from hybridization between two distinct species without a change in ploidy level. Reproductive isolation between a homoploid hybrid species and its parents is generally attained via chromosomal re...

  14. Hybrid armature projectile

    Science.gov (United States)

    Hawke, Ronald S.; Asay, James R.; Hall, Clint A.; Konrad, Carl H.; Sauve, Gerald L.; Shahinpoor, Mohsen; Susoeff, Allan R.

    1993-01-01

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasama blowby.

  15. Intraply Hybrid Composite Design

    Science.gov (United States)

    Chamis, C. C.; Sinclair, J. H.

    1986-01-01

    Several theoretical approaches combined in program. Intraply hybrid composites investigated theoretically and experimentally at Lewis Research Center. Theories developed during investigations and corroborated by attendant experiments used to develop computer program identified as INHYD (Intraply Hybrid Composite Design). INHYD includes several composites micromechanics theories, intraply hybrid composite theories, and integrated hygrothermomechanical theory. Equations from theories used by program as appropriate for user's specific applications.

  16. Hybrid quantum information processing

    Energy Technology Data Exchange (ETDEWEB)

    Furusawa, Akira [Department of Applied Physics, School of Engineering, The University of Tokyo (Japan)

    2014-12-04

    I will briefly explain the definition and advantage of hybrid quantum information processing, which is hybridization of qubit and continuous-variable technologies. The final goal would be realization of universal gate sets both for qubit and continuous-variable quantum information processing with the hybrid technologies. For that purpose, qubit teleportation with a continuousvariable teleporter is one of the most important ingredients.

  17. Hybrid Integrated Platforms for Silicon Photonics

    Directory of Open Access Journals (Sweden)

    John E. Bowers

    2010-03-01

    Full Text Available A review of recent progress in hybrid integrated platforms for silicon photonics is presented. Integration of III-V semiconductors onto silicon-on-insulator substrates based on two different bonding techniques is compared, one comprising only inorganic materials, the other technique using an organic bonding agent. Issues such as bonding process and mechanism, bonding strength, uniformity, wafer surface requirement, and stress distribution are studied in detail. The application in silicon photonics to realize high-performance active and passive photonic devices on low-cost silicon wafers is discussed. Hybrid integration is believed to be a promising technology in a variety of applications of silicon photonics.

  18. Electroactive functional hybrid layered nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Destri, Giovanni Li; Torrisi, Vanna; Marletta, Giovanni [Laboratory for Molecular Surfaces and Nanotechnology (LAMSUN) - University of Catania and CSGI - Catania (Italy)

    2012-07-11

    Two methodologies to build new nanostructured hybrid layered nanocomposites are presented. The first one involves the preparation of hybrid metal/polymer nanolayers (NLs) by combining two monolayer preparation techniques: Horizontal Precipitation Langmuir Blodgett method (HP-ML), for copolymer monolayers and sputter deposition technique, for Au NLs deposition. The second methodology is aimed to prepare regular arrays of nanopores, with diameter ranging between 40-100 nm, in ultra-thin films of electroactive polymers, to obtain embedded regular arrays of nanopores filled by a further electroactive organic component. The produced hybrid MLs have been characterized by means of X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and Grazing Incidence X-ray Diffraction (GI-XRD). In the first case, current-voltage (I-V) measurements demonstrate that the multilayers exhibit a bipolar conduction behaviour (electrons and holes carriers), with a peculiar transition in the nature of the majority carriers (from holes to electrons) above a threshold number of bilayers. In the second case, it is found that the degree of pore filling, as well as the polymer crystallinity can be easily modulated, prompting the tuning of the photoresponse of the nanocomposites.

  19. A preliminary study on siHybrids technique on inhibiting the efflux pump gene mexB of Pseudomonas aeruginosa in vitro%siHybrids技术沉默铜绿假单胞菌外排泵 mexB基因体外效应的初步研究

    Institute of Scientific and Technical Information of China (English)

    毛艳; 宋莹; 陈佳; 许东; 邢铭友; 王丽丽; 谢旭华; 龚凤云; 夏超; 申爱霞

    2011-01-01

    目的 初步研究siHybrids技术对铜绿假单胞菌野生菌PAO1外排泵mexB基因体外沉默效应。方法 针对铜绿假单胞菌野生株PAO1外排泵mexB基因设计并合成3条特异性siHybrids分子和1条阴性对照siHybrids分子。在分子浓度为50 nmol/L下,分别以合成的siHybrids分子干扰铜绿假单胞菌野生菌PAO1,并设实验组为铜绿假单胞菌野生菌PAO1空白对照组,阴性对照组scamble(sc)-001,干预组siHybrids( si) -001、siHybrids( si) -002及siHybrids( si) -003,分别在干预12h及24h后采用real-time PCR法检测各实验组中靶基因mexB基因mRNA的表达水平。进一步采用Mueller-Hinton倍比稀释法检测50 nmol/L浓度下,siHy brids分子干预铜绿假单胞菌野生菌PAO1前后氯霉素(CP)、红霉素(EM)、左氧氟沙星(L-OrLX)、头孢他啶(CAZ)、美洛培南(MER)的最小抑菌浓度(MIC)值。结果 不同siHybrids分子干预PAO1 12 h后,mexB基因mRNA表达量无明显差异性;但干预24 h后,mexB基因mRNA表达量:干预组(si-001,si-002,si-003)比空白对照组、阴性对照组(sc-001)有明显下降。对比干预12h、24h后mexB基因mRNA表达量,可以发现空白对照组、阴性对照组(sc-001)mRNA的表达量成上升趋势,而干预组(si-001,si-002,si-003)mexB基因mRNA表达量均呈下降趋势。siHybrids分子在干预铜绿假单胞菌野生菌24h前后的氯霉素(CP)、红霉素(EM)、左氧氟沙星( L-OFLX)、头孢他啶(CAZ)、美洛培南(MER) MIC无明显差异性。结论 在mRNA表达水平上,siHybrids分子能体外干预铜绿假单胞菌PAO1 mexB基因mRNA表达,此种沉默作用呈现时间依赖性,且在24h能有效地发挥干预作用。%Objective To investigate the effect and mechanism of siHybrids technique on inhibiring the efflux pump gene mexB of Pseudomonas aeruginosa PAO1 in vitro. Methods Targeting the efflux pump gene mexB of Pseudomonas aeruginosa PAO1 ,we designed and

  20. Novel brewing yeast hybrids: creation and application.

    Science.gov (United States)

    Krogerus, Kristoffer; Magalhães, Frederico; Vidgren, Virve; Gibson, Brian

    2017-01-01

    The natural interspecies Saccharomyces cerevisiae × Saccharomyces eubayanus hybrid yeast is responsible for global lager beer production and is one of the most important industrial microorganisms. Its success in the lager brewing environment is due to a combination of traits not commonly found in pure yeast species, principally low-temperature tolerance, and maltotriose utilization. Parental transgression is typical of hybrid organisms and has been exploited previously for, e.g., the production of wine yeast with beneficial properties. The parental strain S. eubayanus has only been discovered recently and newly created lager yeast strains have not yet been applied industrially. A number of reports attest to the feasibility of this approach and artificially created hybrids are likely to have a significant impact on the future of lager brewing. De novo S. cerevisiae × S. eubayanus hybrids outperform their parent strains in a number of respects, including, but not restricted to, fermentation rate, sugar utilization, stress tolerance, and aroma formation. Hybrid genome function and stability, as well as different techniques for generating hybrids and their relative merits are discussed. Hybridization not only offers the possibility of generating novel non-GM brewing yeast strains with unique properties, but is expected to aid in unraveling the complex evolutionary history of industrial lager yeast.

  1. The hydrogen hybrid option

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.R.

    1993-10-15

    The energy efficiency of various piston engine options for series hybrid automobiles are compared with conventional, battery powered electric, and proton exchange membrane (PEM) fuel cell hybrid automobiles. Gasoline, compressed natural gas (CNG), and hydrogen are considered for these hybrids. The engine and fuel comparisons are done on a basis of equal vehicle weight, drag, and rolling resistance. The relative emissions of these various fueled vehicle options are also presented. It is concluded that a highly optimized, hydrogen fueled, piston engine, series electric hybrid automobile will have efficiency comparable to a similar fuel cell hybrid automobile and will have fewer total emissions than the battery powered vehicle, even without a catalyst.

  2. Hybrid Models in Loop Quantum Cosmology

    CERN Document Server

    Navascués, B Elizaga; Marugán, G A Mena

    2016-01-01

    In the framework of Loop Quantum Cosmology, inhomogeneous models are usually quantized by means of a hybrid approach that combines loop quantization techniques with standard quantum field theory methods. This approach is based on a splitting of the phase space in a homogeneous sector, formed by global, zero-modes, and an inhomogeneous sector, formed by the remaining, infinite number of modes, that describe the local degrees of freedom. Then, the hybrid quantization is attained by adopting a loop representation for the homogeneous gravitational sector, while a Fock representation is used for the inhomogeneities. The zero-mode of the Hamiltonian constraint operator couples the homogeneous and inhomogeneous sectors. The hybrid approach, therefore, is expected to provide a suitable quantum theory in regimes where the main quantum effects of the geometry are those affecting the zero-modes, while the inhomogeneities, still being quantum, can be treated in a more conventional way. This hybrid strategy was first prop...

  3. The path exchange method for hybrid LCA.

    Science.gov (United States)

    Lenzen, Manfred; Crawford, Robert

    2009-11-01

    Hybrid techniques for Life-Cycle Assessment (LCA) provide a way of combining the accuracy of process analysis and the completeness of input-output analysis. A number of methods have been suggested to implement a hybrid LCA in practice, with the main challenge being the integration of specific process data with an overarching input-output system. In this work we present a new hybrid LCA method which works at the finest input-output level of detail: structural paths. This new Path Exchange method avoids double-counting and system disturbance just as previous hybrid LCA methods, but instead of a large LCA database it requires only a minimum of external information on those structural paths that are to be represented by process data.

  4. Hybridization and extinction.

    Science.gov (United States)

    Todesco, Marco; Pascual, Mariana A; Owens, Gregory L; Ostevik, Katherine L; Moyers, Brook T; Hübner, Sariel; Heredia, Sylvia M; Hahn, Min A; Caseys, Celine; Bock, Dan G; Rieseberg, Loren H

    2016-08-01

    Hybridization may drive rare taxa to extinction through genetic swamping, where the rare form is replaced by hybrids, or by demographic swamping, where population growth rates are reduced due to the wasteful production of maladaptive hybrids. Conversely, hybridization may rescue the viability of small, inbred populations. Understanding the factors that contribute to destructive versus constructive outcomes of hybridization is key to managing conservation concerns. Here, we survey the literature for studies of hybridization and extinction to identify the ecological, evolutionary, and genetic factors that critically affect extinction risk through hybridization. We find that while extinction risk is highly situation dependent, genetic swamping is much more frequent than demographic swamping. In addition, human involvement is associated with increased risk and high reproductive isolation with reduced risk. Although climate change is predicted to increase the risk of hybridization-induced extinction, we find little empirical support for this prediction. Similarly, theoretical and experimental studies imply that genetic rescue through hybridization may be equally or more probable than demographic swamping, but our literature survey failed to support this claim. We conclude that halting the introduction of hybridization-prone exotics and restoring mature and diverse habitats that are resistant to hybrid establishment should be management priorities.

  5. Spoof Plasmon Hybridization

    CERN Document Server

    Zhang, Jingjing; Luo, Yu; Shen, Xiaopeng; Maier, Stefan A; Cui, Tie Jun

    2016-01-01

    Plasmon hybridization between closely spaced nanoparticles yields new hybrid modes not found in individual constituents, allowing for the engineering of resonance properties and field enhancement capabilities of metallic nanostructure. Experimental verifications of plasmon hybridization have been thus far mostly limited to optical frequencies, as metals cannot support surface plasmons at longer wavelengths. Here, we introduce the concept of 'spoof plasmon hybridization' in highly conductive metal structures and investigate experimentally the interaction of localized surface plasmon resonances (LSPR) in adjacent metal disks corrugated with subwavelength spiral patterns. We show that the hybridization results in the splitting of spoof plasmon modes into bonding and antibonding resonances analogous to molecular orbital rule and plasmonic hybridization in optical spectrum. These hybrid modes can be manipulated to produce enormous field enhancements (larger than 5000) by tuning the separation between disks or alte...

  6. Marine Fish Hybridization

    KAUST Repository

    He, Song

    2017-04-01

    Natural hybridization is reproduction (without artificial influence) between two or more species/populations which are distinguishable from each other by heritable characters. Natural hybridizations among marine fishes were highly underappreciated due to limited research effort; it seems that this phenomenon occurs more often than is commonly recognized. As hybridization plays an important role in biodiversity processes in the marine environment, detecting hybridization events and investigating hybridization is important to understand and protect biodiversity. The first chapter sets the framework for this disseration study. The Cohesion Species Concept was selected as the working definition of a species for this study as it can handle marine fish hybridization events. The concept does not require restrictive species boundaries. A general history and background of natural hybridization in marine fishes is reviewed during in chapter as well. Four marine fish hybridization cases were examed and documented in Chapters 2 to 5. In each case study, at least one diagnostic nuclear marker, screened from among ~14 candidate markers, was found to discriminate the putative hybridizing parent species. To further investigate genetic evidence to support the hybrid status for each hybrid offspring in each case, haploweb analysis on diagnostic markers (nuclear and/or mitochondrial) and the DAPC/PCA analysis on microsatellite data were used. By combining the genetic evidences, morphological traits, and ecological observations together, the potential reasons that triggered each hybridization events and the potential genetic/ecology effects could be discussed. In the last chapter, sequences from 82 pairs of hybridizing parents species (for which COI barcoding sequences were available either on GenBank or in our lab) were collected. By comparing the COI fragment p-distance between each hybridizing parent species, some general questions about marine fish hybridization were discussed: Is

  7. Evolution of a Laser Hybrid Welding Map

    Science.gov (United States)

    Kaplan, Alexander F. H.; Frostevarg, Jan; Ilar, Torbjörn; Bang, Hee-Seon; Bang, Han-Sur

    Laser arc hybrid welding combines the advantages but also the complex physical mechanisms of gas metal arc welding and laser keyhole welding. From manifold mainly experimental but also theoretical research results a map with versatile functions was initiated for the first time. The purpose is to survey the overall context and to facilitate navigation to the various phenomena that are shown through case studies accompanied by theoretical explanations and guidelines for optimization. Though not complete, the map enables systematic and graphical navigation to relevant publications. Based on a fundamental structure of the map, which was decided early, it is inherently extendable in the future by adding existing and new knowledge, also from other research groups, enabling evolution. The fundament of the map structure comprises gouge thickness, joint type and metal grade, in coherence with product and weld designers' starting points. The next hierarchy level of the map offers options in the joint type as well as in hybrid welding techniques. The latter contains techniques like double-sided welding, pulse shaping management of the arc or laser, CMT arcs, tandem arcs, or remelting of undercuts. In addition to laser-arc hybrid welding, other hybrid laser techniques like multilayer hot-wire laser welding of narrow gaps or hybrid laser friction stir welding can be taken into account. At the other end of the hierarchy, the map offers via a database-like archive electronic navigation to research results like weld macrographs, high speed imaging or numerical simulation results of the welding process.

  8. Technology for Hybrid Pepper Seed Production in China

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    History of hybrid pepper seed production, the status of annually balanced production, and innovative techniques for the large-scale seed production in China are reviewed. Helped by the technological breakthroughs in these fields, China has been the largest base for hybrid pepper seed production in the world.

  9. BI-LAYER HYBRID BIOCOMPOSITES: CHEMICAL RESISTANT AND PHYSICAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Mohammad Jawaid,

    2012-02-01

    Full Text Available Bi-layer hybrid biocomposites were fabricated by hand lay-up technique by reinforcing oil palm empty fruit bunch (EFB and jute fibre mats with epoxy matrix. Hybrid composites were prepared by varying the relative weight fraction of the two fibres. The physical (void content, density, dimensional stability, and chemical resistant properties of hybrid composites were evaluated. When the jute fibre loading increased in hybrid composites, physical and chemical resistant properties of hybrid composites were enhanced. Void content of hybrid composites decreased with an increase in jute fibre loading because jute fibres showed better fibre/matrix interface bonding, which leads to a reduction in voids. The density of hybrid composite increased as the quantity of jute fibre loading increased. The hybridization of the jute fibres with EFB composite improved the dimensional stability of the hybrid composites. The performance of hybrid composites towards chemical reagents improved with an increase in jute fibre loading as compared to the EFB composite. The combination of oil palm EFB/jute fibres with epoxy matrix produced hybrid biocomposites material that is competitive to synthetic composites.

  10. 棉花多重 PCR 技术及其对杂交棉纯度鉴定的初步研究%Preliminary Study on Multiplex PCR Technique and Its Application in Hybrid Cotton Seed Purity Test

    Institute of Scientific and Technical Information of China (English)

    陈浩东; 刘方; 王为; 肖才升; 李庠; 王琳; 李育强; 王坤波

    2011-01-01

    A series of stable polymorphism SSR primers in Xiangzamian series cultivars were used to construct various primer combinations according to the difference of their amplified band's size for multiplex PCR amplification of cotton.Eighty percent of double PCR amplified normally based on the principle of amplified fragments size difference under the same conditions as their single PCR reactions.Besides, triplex and quadruple PCR were also amplified normally using primers of double PCR with good results.So we proposed a simplified protocol of multiplex PCR assay in cotton.The multiplex PCR technology was used to detect the purity of hybrid cotton seeds which clearly identified impurity and blend of female parent seeds and also other hybrid cotton seeds.It can be used as a reference for the rapid and accurate identification of cotton hybrids.%选取在湘杂棉系列品种间表现出多态性稳定的部分SSR引物,基于其扩增片段大小的不同来组合引物,进行棉花多重PCR扩增.结果表明,在与单-PCR扩增相同反应条件下,仅根据扩增片段大小不同的原则,可使80%的两重PCR组合获得正常扩增.利用两重PCR组合正常扩增的引物进行三重、四重PCR反应时,均可获得正常扩增的产物,在此基础上提出棉花上简化的多重PCR优化程序.并将多重PCR技术应用于杂交棉种子纯度检测,清楚地鉴定出母本种子混杂和其它杂交棉种子的混杂,从而为棉花杂交种的快速准确鉴定奠定了技术基础.

  11. Primary Studies on Breeding Techniques by 2n Gametes in colored Zantedeschia hybrid%彩色马蹄莲2n配子育种技术初探

    Institute of Scientific and Technical Information of China (English)

    李洁筠; 吴红芝; 陈溪; 周涤

    2011-01-01

    以彩色马蹄莲的栽培品种'黑魔术'Black magic、'火烈鸟'Flamingo为试验材料,研究彩色马蹄莲2n配子育种技术.选择刚从茎秆中抽出的幼小健壮小花,用0.15%的秋水仙素处理以诱导2n配子,将诱导的2n配子进行不同组合的杂交实验.结果表明:秋水仙素处理对彩色马蹄莲雄雌蕊发育有一定毒副作用,其中对雌蕊的损伤大于雄蕊;2n配子能在一定程度上克服杂交后代不育性;在相同条件下,经2n配子诱导处理的杂交种子与未处理的对照种子相比,种子萌发时间大幅度缩短(50天左右),叶片变薄、变大、叶色变浅,有些杂交植株表现出不同程度的畸变.通过对杂交后代的细胞学鉴定表明:处理配子杂交后代中获得染色体数目为48(2n=3x=48)的三倍体植株.%The cultivars of colored Zantedeschia hybrid; Black magic and Flamingo are used as experimental material. The young robust buds were selected to be treated with 0.15% colchicine to induce 2n gametes. The treated young flower buds between the two cultivars were crossed when pistil and stamena matured. The results showed that: colchicine had some poison impact on the development of the pistil and androecium, especially on that of pistil; 2n gametes can overcome sterility of hybrids to a certain extent. Under the same conditions, the seed germination of hybrids derived from treated gametes was sped up greatly (about 50 d in advance)compared with that of control seed; the leaves were larger, thinner, and light color, and some plants performed mafformation. The chromosome identification showed: triploids were achieved from the crossing of treated gametes with normal gametes and the chromosome number was 48 (2n=3x=48).

  12. Effect of negative substrate bias on the microstructure and mechanical properties of Ti-Si-N films deposited by a hybrid filtered cathodic arc and ion beam sputtering technique

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yujuan, E-mail: cnzhangyujuan@yahoo.com.cn [Laboratory of Special Functional Materials, Henan University, Kaifeng 475004 (China); Yang Yingze; Zhai Yuhao; Zhang Pingyu [Laboratory of Special Functional Materials, Henan University, Kaifeng 475004 (China)

    2012-07-01

    A hybrid cathodic arc and ion beam sputtering method was employed to synthesize Ti-Si-N films. The influence of negative substrate bias on the structure and mechanical properties was investigated by using XRD, XPS, HRTEM, nanoindentor and so on. With the increasing of negative bias there is a decrease in the TiN crystallite size from 36 nm to 10 nm. Negative substrate bias promoted the conformation of nc-TiN/a-Si{sub 3}N{sub 4} nanocomposite structure with complete phase separation and uniform crystallite size. Superhard TiSiN films with a maximum hardness of 46 GPa were successfully synthesized under 100 V negative bias. Severe oxidation occurred in films deposited under 200 V and 300 V negative substrate bias due to the decreasing of deposition rate, which led to the hardness of films reduced to the value of 26 GPa and 22 GPa respectively.

  13. On a Variational Approach to Optimization of Hybrid Mechanical Systems

    Directory of Open Access Journals (Sweden)

    Vadim Azhmyakov

    2010-01-01

    Full Text Available This paper deals with multiobjective optimization techniques for a class of hybrid optimal control problems in mechanical systems. We deal with general nonlinear hybrid control systems described by boundary-value problems associated with hybrid-type Euler-Lagrange or Hamilton equations. The variational structure of the corresponding solutions makes it possible to reduce the original “mechanical” problem to an auxiliary multiobjective programming reformulation. This approach motivates possible applications of theoretical and computational results from multiobjective optimization related to the original dynamical optimization problem. We consider first order optimality conditions for optimal control problems governed by hybrid mechanical systems and also discuss some conceptual algorithms.

  14. Experimental techniques; Techniques experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Roussel-Chomaz, P. [GANIL CNRS/IN2P3, CEA/DSM, 14 - Caen (France)

    2007-07-01

    This lecture presents the experimental techniques, developed in the last 10 or 15 years, in order to perform a new class of experiments with exotic nuclei, where the reactions induced by these nuclei allow to get information on their structure. A brief review of the secondary beams production methods will be given, with some examples of facilities in operation or under project. The important developments performed recently on cryogenic targets will be presented. The different detection systems will be reviewed, both the beam detectors before the targets, and the many kind of detectors necessary to detect all outgoing particles after the reaction: magnetic spectrometer for the heavy fragment, detection systems for the target recoil nucleus, {gamma} detectors. Finally, several typical examples of experiments will be detailed, in order to illustrate the use of each detector either alone, or in coincidence with others. (author)

  15. Hydraulic Hybrid Propulsion for Heavy Vehicles: Combining the Simulation and Engine-In-the-Loop Techniques to Maximize the Fuel Economy and Emission Benefits Propulsion hybride hydraulique des poids lourds : une approche alliant les techniques de simulation et d’« Engine-In-the-loop » (EIL afin de maximiser les économies de carburant et les avantages en termes d’émissions

    Directory of Open Access Journals (Sweden)

    Filipi Z.

    2009-09-01

    Full Text Available The global energy situation, the dependence of the transportation sector on fossil fuels, and a need for a rapid response to the global warming challenge, provide a strong impetus for development of fuel efficient vehicle propulsion. The task is particularly challenging in the case of trucks due to severe weight/size constraints. Hybridization is the only approach offering significant breakthroughs in near and mid-term. In particular, the series configuration decouples the engine from the wheels and allows full flexibility in controlling the engine operation, while the hydraulic energy conversion and storage provides exceptional power density and efficiency. The challenge stems from a relatively low energy density of the hydraulic accumulator. This places particular emphasis on development of the supervisory controller. The conventional wisdom is to operate the engine at the “sweet spot”, but the aggressive pursuit of engine efficiency as the sole objective can lead to frequent and rapid diesel engine transients, thus causing an adverse affect on the soot emissions and driver feel. Therefore, we propose a comprehensive methodology for considering a combined hybrid system fuel-economy and emissions objective. The fuel economy is addressed with the simulation-based approach, while investigating the impact of engine transients on particulate emission relies on the Engine-In-the-loop (EIL capability. The EIL study confirms advantages of a modulated state-of-charge control over the thermostatic approach, and demonstrates the ability of the Series Hydraulic Hybrid to improve the fuel economy of the medium truck by 72%, while reducing the particulate emission by 74% compared to the conventional baseline over the city driving schedule. La situation énergétique mondiale, la dépendance du secteur des transports vis-à-vis des combustibles d’origine fossile et la nécessité d’une réponse rapide face au défi présenté par le r

  16. Recent Advances in Fluorescence in situ Hybridization

    OpenAIRE

    吉田, 廸弘; Michihiro C., Yoshida; 北海道大学理学部附属動物染色体研究施設; Chromosome Research Unit, Faculty of Science, Hokkaido University

    1992-01-01

    Fluorescence in situ hybridization (FISH) procedures that directly couple molecular and cytological information allow precise visualization of DNA sequences on metaphase chromosomes and interphase nuclei. These techniques can be used to identify chromosomes, detect chromosomal aberrations, and analyze linear and spetial genome organization. FISH procedures are also used to clinical fields for diagnosis of disease-related chromosome changes and tumor biology.

  17. The study of multiple RT-PCR-based reverse dot blot hybridization technique for detecting influenza viruses%多重RT-PCR结合反向杂交技术检测多种流感病毒方法的研究

    Institute of Scientific and Technical Information of China (English)

    杨亮; 钱永华; 曾毅; 张晓梅; 张晓光; 马晶; 王敏; 温乐英; 王大燕; 白天; 舒跃龙

    2010-01-01

    目的 建立一种基于多重RT-PCR结合反向斑点杂交技术的多种流感病毒核酸快速检测方法.方法 对5种亚型流感病毒的HA基因序列进行比对分析,选择合适的保守区域设计引物序列,并在扩增产物序列内部选择高变区设计探针序列.首先,使用生物素标记的引物扩增出同样带标记的PCR产物;然后,产物与膜上的探针杂交,通过生物素-亲和素反应,最后以斑点显色的方式来检测和鉴别不同亚型的流感病毒.实验中还通过摸索不同的引物浓度和探针浓度来优化反应条件.结果 成功建立了一种基于多重RT-PCR结合反向斑点杂交技术的检测方法,该方法能够成功检测和鉴别5种不同亚型的流感病毒,检测灵敏度比传统的RT-PCR方法高100~1000倍.结论 成功建立了一种可高通量快速检测多种流感病毒的多重RT-PCR结合反向斑点杂交技术的检测方法.%Objective To establish a multiplex RT-PCR-based reverse dot blot hybridization technique to detect influenza viruses. Methods Obtain the HA nucleotide sequences of seasonal influenza H1 N1, seasonal influenza H3N2, influenza H1 N1 and human avian influenza H5 N1 from GenBank. Design primers in conservative district and probes t in high variable region respectively, after analyzing the HA nucleotide sequences of influenza virus through the Vector NTI 9.0. Establish and optimize multiple RT-PCR system by comparing amplification efficiency and specificity at different primer concentrations. Establish the reverse dot hybridization system after optimizing the concentration of probes. To compare the sensitivity and specificity of this technique and the general RT-PCR Method through extracting the viral RNA of the mentioned influenza virus which are to be the reference substance. Results Successfully establish a multiplex RT-PCR-based reverse dot blot hybridization technique for detecting influenza viruses. This technique is 100-1000 times more

  18. In situ hybridization-theory and practice.

    Science.gov (United States)

    Kadkol, S S; Gage, W R; Pasternack, G R

    1999-09-01

    In situ hybridization is a technique to determine and localize target nucleic acids in morphologically preserved tissue sections. Recent advances in methods have greatly increased the sensitivity of the technique, and it is currently possible to detect extremely few copies of any given target sequence with nonisotopic methods. In this teaching review, we integrate theoretical background, technical considerations, and guidelines for usage for this important component of molecular diagnosis.

  19. BSA Hybrid Synthesized Polymer

    Institute of Scientific and Technical Information of China (English)

    Zong Bin LIU; Xiao Pei DENG; Chang Sheng ZHAO

    2006-01-01

    Bovine serum albumin (BSA), a naturally occurring biopolymer, was regarded as a polymeric material to graft to an acrylic acid (AA)-N-vinyl pyrrolidone (NVP) copolymer to form a biomacromolecular hybrid polymer. The hybrid polymer can be blended with polyethersulfone (PES) to increase the hydrophilicity of the PES membrane, which suggested that the hybrid polymer might have a wide application in the modification of biomaterials.

  20. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Ronkko, Mauno; Ravn, Anders P.

    1997-01-01

    a differential action, which allows differential equations as primitive actions. The extension allows us to model hybrid systems with both continuous and discrete behaviour. The main result of this paper is an extension of such a hybrid action system with parallel composition. The extension does not change...... the original meaning of the parallel composition, and therefore also the ordinary action systems can be composed in parallel with the hybrid action systems....

  1. HYBRID VEHICLE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-06-01

    Full Text Available The hybrid vehicle control system includes a start–stop system for an internal combustion engine. The system works in a hybrid mode and normal vehicle operation. To simplify the start–stop system, there were user new possibilities of a hybrid car, which appeared after the conversion. Results of the circuit design of the proposed system of basic blocks are analyzed.

  2. Nanoscale Organic Hybrid Electrolytes

    KAUST Repository

    Nugent, Jennifer L.

    2010-08-20

    Nanoscale organic hybrid electrolytes are composed of organic-inorganic hybrid nanostructures, each with a metal oxide or metallic nanoparticle core densely grafted with an ion-conducting polyethylene glycol corona - doped with lithium salt. These materials form novel solvent-free hybrid electrolytes that are particle-rich, soft glasses at room temperature; yet manifest high ionic conductivity and good electrochemical stability above 5V. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Hybrid radiator cooling system

    Science.gov (United States)

    France, David M.; Smith, David S.; Yu, Wenhua; Routbort, Jules L.

    2016-03-15

    A method and hybrid radiator-cooling apparatus for implementing enhanced radiator-cooling are provided. The hybrid radiator-cooling apparatus includes an air-side finned surface for air cooling; an elongated vertically extending surface extending outwardly from the air-side finned surface on a downstream air-side of the hybrid radiator; and a water supply for selectively providing evaporative cooling with water flow by gravity on the elongated vertically extending surface.

  4. Hybrid Unifying Variable Supernetwork Model

    Institute of Scientific and Technical Information of China (English)

    LIU; Qiang; FANG; Jin-qing; LI; Yong

    2015-01-01

    In order to compare new phenomenon of topology change,evolution,hybrid ratio and network characteristics of unified hybrid network theoretical model with unified hybrid supernetwork model,this paper constructed unified hybrid variable supernetwork model(HUVSM).The first layer introduces a hybrid ratio dr,the

  5. Large Unifying Hybrid Supernetwork Model

    Institute of Scientific and Technical Information of China (English)

    LIU; Qiang; FANG; Jin-qing; LI; Yong

    2015-01-01

    For depicting multi-hybrid process,large unifying hybrid network model(so called LUHNM)has two sub-hybrid ratios except dr.They are deterministic hybrid ratio(so called fd)and random hybrid ratio(so called gr),respectively.

  6. Hybrid Rocket Technology

    National Research Council Canada - National Science Library

    Sankaran Venugopal; K K Rajesh; V Ramanujachari

    2011-01-01

    With their unique operational characteristics, hybrid rockets can potentially provide safer, lower-cost avenues for spacecraft and missiles than the current solid propellant and liquid propellant systems...

  7. Gravity localization on hybrid branes

    Energy Technology Data Exchange (ETDEWEB)

    Veras, D.F.S., E-mail: franklin@fisica.ufc.br [Universidade Federal do Ceará (UFC), Departamento de Física, Campus do Pici, Caixa Postal 6030, 60455-760, Fortaleza, Ceará (Brazil); Cruz, W.T., E-mail: wilamicruz@gmail.com [Instituto Federal de Educação, Ciência e Tecnologia do Ceará (IFCE), Campus Juazeiro do Norte, 63040-540 Juazeiro do Norte, Ceará (Brazil); Maluf, R.V., E-mail: r.v.maluf@fisica.ufc.br [Universidade Federal do Ceará (UFC), Departamento de Física, Campus do Pici, Caixa Postal 6030, 60455-760, Fortaleza, Ceará (Brazil); Almeida, C.A.S., E-mail: carlos@fisica.ufc.br [Universidade Federal do Ceará (UFC), Departamento de Física, Campus do Pici, Caixa Postal 6030, 60455-760, Fortaleza, Ceará (Brazil)

    2016-03-10

    This work deals with gravity localization on codimension-1 brane worlds engendered by compacton-like kinks, the so-called hybrid branes. In such scenarios, the thin brane behavior is manifested when the extra dimension is outside the compact domain, where the energy density is non-trivial, instead of asymptotically as in the usual thick brane models. The zero mode is trapped in the brane, as required. The massive modes, although not localized in the brane, have important phenomenological implications such as corrections to the Newton's law. We study such corrections in the usual thick domain wall and in the hybrid brane scenarios. By means of suitable numerical methods, we attain the mass spectrum for the graviton and the corresponding wavefunctions. The spectra possess the usual linearly increasing behavior from the Kaluza–Klein theories. Further, we show that the 4D gravitational force is slightly increased at short distances. The first eigenstate contributes highly for the correction to the Newton's law. The subsequent normalized solutions have diminishing contributions. Moreover, we find out that the phenomenology of the hybrid brane is not different from the usual thick domain wall. The use of numerical techniques for solving the equations of the massive modes is useful for matching possible phenomenological measurements in the gravitational law as a probe to warped extra dimensions.

  8. Gravity localization on hybrid branes

    Science.gov (United States)

    Veras, D. F. S.; Cruz, W. T.; Maluf, R. V.; Almeida, C. A. S.

    2016-03-01

    This work deals with gravity localization on codimension-1 brane worlds engendered by compacton-like kinks, the so-called hybrid branes. In such scenarios, the thin brane behavior is manifested when the extra dimension is outside the compact domain, where the energy density is non-trivial, instead of asymptotically as in the usual thick brane models. The zero mode is trapped in the brane, as required. The massive modes, although not localized in the brane, have important phenomenological implications such as corrections to the Newton's law. We study such corrections in the usual thick domain wall and in the hybrid brane scenarios. By means of suitable numerical methods, we attain the mass spectrum for the graviton and the corresponding wavefunctions. The spectra possess the usual linearly increasing behavior from the Kaluza-Klein theories. Further, we show that the 4D gravitational force is slightly increased at short distances. The first eigenstate contributes highly for the correction to the Newton's law. The subsequent normalized solutions have diminishing contributions. Moreover, we find out that the phenomenology of the hybrid brane is not different from the usual thick domain wall. The use of numerical techniques for solving the equations of the massive modes is useful for matching possible phenomenological measurements in the gravitational law as a probe to warped extra dimensions.

  9. Research on Modulation Strategies Based on Multilevel Inverter Universal Hybrid Topology

    Institute of Scientific and Technical Information of China (English)

    Zhou Jinghua; Su Yanmin; Shen Chuanwen; Zhang Lin

    2005-01-01

    Based on multi-module-cascaded inverter topology, this study presented a universal multilevel inverter hybrid topology and unified the researches on multilevel inverter topology. According to the freedom of this universal topology, several new hybrid topologies were constructed. Also, based on conventional modulation strategies- multi-carrier SPWM (Sinusoidal Pulse Width Modulation), hybrid modulation strategies were introduced corresponding to hybrid topologies, and a multilevel SVPWM (Space Vector Pulse Width Modulation) technique based on phase-shifted theory was naturally produced. Simulation and experiment results prove that hybrid topologies and corresponding modulation strategies are valid, which lay a foundation for practical application of hybrid multilevel inverter topologies.

  10. Hybrid Testing of Composite Structures with Single-Axis Control

    DEFF Research Database (Denmark)

    Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik

    2013-01-01

    a hybrid testing platform is introduced for single-component hybrid testing. In this case, the boundary between the numerical model and experimental setup is defined by multiple Degrees-Of-Freedoms (DOFs) which highly complicate the transferring of response between the two substructures. Digital Image......Hybrid testing is a substructuring technique where a structure is emulated by modelling a part of it in a numerical model while testing the remainder experimentally. Previous research in hybrid testing has been performed on multi-component structures e.g. damping fixtures, however in this paper...... Correlation (DIC) is therefore implemented for displacement control of the experimental setup. The hybrid testing setup was verified on a multicomponent structure consisting of a beam loaded in three point bending and a numerical structure of a frame. Furthermore, the stability of the hybrid testing loop...

  11. Forty Years' Development of Hybrid Rice:China's Experience

    Institute of Scientific and Technical Information of China (English)

    SUN Liang-xian; CHENG Shi-hua; DONG Hai-tao; CAO Li-yong; LI De-bao; YANG Shi-hua; ZHAI Hu-qu

    2004-01-01

    China is the first country where heterosis of hybrid rice was successfully exploited commercially on a large scale in the world. Hybrid rice has been developed for 40 years since Prof. Yuan initiated it in China. It had been planted about 330 million hectares with an increase of nearly 400 million tons of rice during 1976-2002. China's experience on hybrid rice could be attributed to utilization of various cytoplasmic male sterility (CMS) resources, high outcrossing rate CMS lines and stable environmentally induced genetic male sterile (EGMS) lines, improvement of diseases resistance and grain quality, and combination of ideal plant type with heterosis in hybrid rice breeding program. Innovative breeding techniques, e.g. improvement in root system, molecular marker-assisted selection and wild hybridization should be considered in further development of hybrid rice in China.

  12. Original Framework for Optimizing Hybrid Energy Supply

    Directory of Open Access Journals (Sweden)

    Amevi Acakpovi

    2016-01-01

    Full Text Available This paper proposes an original framework for optimizing hybrid energy systems. The recent growth of hybrid energy systems in remote areas across the world added to the increasing cost of renewable energy has triggered the inevitable development of hybrid energy systems. Hybrid energy systems always pose a problem of optimization of cost which has been approached with different perspectives in the recent past. This paper proposes a framework to guide the techniques of optimizing hybrid energy systems in general. The proposed framework comprises four stages including identification of input variables for energy generation, establishment of models of energy generation by individual sources, development of artificial intelligence, and finally summation of selected sources. A case study of a solar, wind, and hydro hybrid system was undertaken with a linear programming approach. Substantial results were obtained with regard to how load requests were constantly satisfied while minimizing the cost of electricity. The developed framework gained its originality from the fact that it has included models of individual sources of energy that even make the optimization problem more complex. This paper also has impacts on the development of policies which will encourage the integration and development of renewable energies.

  13. Various challenging aspects of hybrid propulsion

    Science.gov (United States)

    Orlandi, O.; Theil, D.; Saramago, J.; Amand, P. G.; Dauch, F.; Gautier, P.

    2011-10-01

    The hybrid technology appears as an innovative, high performance, and promising propulsion technique in a number of space missions. By combining functions and advantages taken from both solid and liquid propulsion, this technology is expected to provide mainly high performance with throttleability and stop-restart capabilities. The safety conditions of engine operation and design reliability almost similar to solid propulsion increase the interest to this technology. However, the standard fuels (mainly based on a carbon polymer) exhibit low regression rates that require complex grain shapes and low loading ratio. Thanks to a dedicated study supported by the European Space Agency (ESA), SNPE in collaboration with Avio and University of Naples (DIAS department) performed an exhaustive state-of-the-art and a market survey of accomplishments in hybrid propulsion. Based on the resulting tradeoff study on potential future launchers and spacecraft applications, the most promising applications are selected to conduct preliminary designs. These applications can also be seen as the vector of hybrid propulsion development. This study concentrates on hybrid propulsion systems with advanced hybrid fuels for Lander platform and Upper Stage. High throttleability and high propulsive performance associated with stop and restart capability are needed to meet mission requirements for Lander and Upper Stage, respectively. Preliminary design shows the advantages provided by hybrid propulsion: a significant payload mass increase for the upper stage case and a soft landing for the Lander case.

  14. Hybrid methods for cybersecurity analysis :

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Warren Leon,; Dunlavy, Daniel M.

    2014-01-01

    Early 2010 saw a signi cant change in adversarial techniques aimed at network intrusion: a shift from malware delivered via email attachments toward the use of hidden, embedded hyperlinks to initiate sequences of downloads and interactions with web sites and network servers containing malicious software. Enterprise security groups were well poised and experienced in defending the former attacks, but the new types of attacks were larger in number, more challenging to detect, dynamic in nature, and required the development of new technologies and analytic capabilities. The Hybrid LDRD project was aimed at delivering new capabilities in large-scale data modeling and analysis to enterprise security operators and analysts and understanding the challenges of detection and prevention of emerging cybersecurity threats. Leveraging previous LDRD research e orts and capabilities in large-scale relational data analysis, large-scale discrete data analysis and visualization, and streaming data analysis, new modeling and analysis capabilities were quickly brought to bear on the problems in email phishing and spear phishing attacks in the Sandia enterprise security operational groups at the onset of the Hybrid project. As part of this project, a software development and deployment framework was created within the security analyst work ow tool sets to facilitate the delivery and testing of new capabilities as they became available, and machine learning algorithms were developed to address the challenge of dynamic threats. Furthermore, researchers from the Hybrid project were embedded in the security analyst groups for almost a full year, engaged in daily operational activities and routines, creating an atmosphere of trust and collaboration between the researchers and security personnel. The Hybrid project has altered the way that research ideas can be incorporated into the production environments of Sandias enterprise security groups, reducing time to deployment from months and

  15. [New microbiological techniques].

    Science.gov (United States)

    Schubert, S; Wieser, A; Bonkat, G

    2017-06-01

    Microbiological diagnostic procedures have changed rapidly in recent years. This is especially true in the field of molecular diagnostics. Classical culture-based techniques are still the gold standard in many areas; however, they are already complemented by automated and also molecular techniques to guarantee faster and better quality results. The most commonly used techniques include real-time polymerase chain reaction (RT-PCR) based systems and nucleic acid hybridization. These procedures are used most powerfully from direct patient samples or in assays to detect the presence of nonculturable or fastidious organisms. Further techniques such as DNA sequencing are not yet used routinely for urological samples and can be considered experimental. However, in conjunction with dropping prices and further technical developments, these techniques promise to be used much more in the near future. Regarding bacterial identification from culture, mass spectrometry (MALDI-TOF MS) has become the technique of choice in recent years especially in Europe. It has tremendously shortened the time to result. This is now going to be extended to antibiotic susceptibility testing. This is of paramount importance in view of ever rising antimicrobial resistance rates. Techniques described in this review offer a faster and better microbiological diagnosis. Such continuous improvements are critical especially in times of cost pressure and rising antimicrobial resistance rates. It is in our interest to provide the best possible care for patients and in this regard a good and effective communication between the laboratory and the clinician is of vital importance.

  16. From hybrid swarms to swarms of hybrids

    Science.gov (United States)

    Stohlgren, Thomas J.; Szalanski, Allen L; Gaskin, John F.; Young, Nicholas E.; West, Amanda; Jarnevich, Catherine S.; Tripodi, Amber

    2015-01-01

    Science has shown that the introgression or hybridization of modern humans (Homo sapiens) with Neanderthals up to 40,000 YBP may have led to the swarm of modern humans on earth. However, there is little doubt that modern trade and transportation in support of the humans has continued to introduce additional species, genotypes, and hybrids to every country on the globe. We assessed the utility of species distributions modeling of genotypes to assess the risk of current and future invaders. We evaluated 93 locations of the genus Tamarix for which genetic data were available. Maxent models of habitat suitability showed that the hybrid, T. ramosissima x T. chinensis, was slightly greater than the parent taxa (AUCs > 0.83). General linear models of Africanized honey bees, a hybrid cross of Tanzanian Apis mellifera scutellata and a variety of European honey bee including A. m. ligustica, showed that the Africanized bees (AUC = 0.81) may be displacing European honey bees (AUC > 0.76) over large areas of the southwestern U.S. More important, Maxent modeling of sub-populations (A1 and A26 mitotypes based on mDNA) could be accurately modeled (AUC > 0.9), and they responded differently to environmental drivers. This suggests that rapid evolutionary change may be underway in the Africanized bees, allowing the bees to spread into new areas and extending their total range. Protecting native species and ecosystems may benefit from risk maps of harmful invasive species, hybrids, and genotypes.

  17. Hybrid rice achievements, development and prospect in China

    Institute of Scientific and Technical Information of China (English)

    MA Guo-hui; YUAN Long-ping

    2015-01-01

    This article reviews the history and progress of hybrid rice development. Hybrid rice research was initiated back in 1964, and commercialized in 1976. Three-line and two-line system hybrid rice were developed in 1974 and 1995, respectively. Research on super hybrid rice, which was ifrst launched by Ministry of Agriculture, China in 1996, is discussed, and the great progress of super hybrid rice had been achieved with a new yield record by 15.4 t ha–1 in the 6.84 ha demonstration location in Xupu, Hunan Province, China in 2014. And the mechanism of heterosis, the techniques of hybrid seed production and the modern ifeld managements in hybrid rice over the past decades are also discussed. Additional y, this article dealt with the intel ectual property protection (IPR) and development of hybrid rice seed industry in China. Major factors that constrain hybrid rice development are analyzed and possible solutions to this problems are proposed. Final y, the authors present methods to further increase production yield, and propose an improvement for breeding super high-yielding hybrid rice based on these methods.

  18. Hybrid optical acoustic seafloor mapping

    Science.gov (United States)

    Inglis, Gabrielle

    The oceanographic research and industrial communities have a persistent demand for detailed three dimensional sea floor maps which convey both shape and texture. Such data products are used for archeology, geology, ship inspection, biology, and habitat classification. There are a variety of sensing modalities and processing techniques available to produce these maps and each have their own potential benefits and related challenges. Multibeam sonar and stereo vision are such two sensors with complementary strengths making them ideally suited for data fusion. Data fusion approaches however, have seen only limited application to underwater mapping and there are no established methods for creating hybrid, 3D reconstructions from two underwater sensing modalities. This thesis develops a processing pipeline to synthesize hybrid maps from multi-modal survey data. It is helpful to think of this processing pipeline as having two distinct phases: Navigation Refinement and Map Construction. This thesis extends existing work in underwater navigation refinement by incorporating methods which increase measurement consistency between both multibeam and camera. The result is a self consistent 3D point cloud comprised of camera and multibeam measurements. In map construction phase, a subset of the multi-modal point cloud retaining the best characteristics of each sensor is selected to be part of the final map. To quantify the desired traits of a map several characteristics of a useful map are distilled into specific criteria. The different ways that hybrid maps can address these criteria provides justification for producing them as an alternative to current methodologies. The processing pipeline implements multi-modal data fusion and outlier rejection with emphasis on different aspects of map fidelity. The resulting point cloud is evaluated in terms of how well it addresses the map criteria. The final hybrid maps retain the strengths of both sensors and show significant improvement

  19. [Development of a Dual Detection Method with Fluorescence In Situ Hybridization and Immunostaining on Formalin-Fixed Paraffin-Embedded Tissue Sections--Molecular Pathological Detection Techniques and Their Applications to Pathological Diagnosis].

    Science.gov (United States)

    Ikeda, Satoshi

    2015-06-01

    Fluorescence in situ hybridization (FISH) has recently become important for pathological diagnosis. However, its practical applications is not widespread because FISH protocol with FFPE specimens is complicated. We report a dual detection method by overlapping FISH with fluorescent immunostaining on FFPE sections. This method is characterized by changing buffers for heat treatment without proteolytic enzyme treatment. Subsequent proteolytic enzyme treatment can be omitted using an antigen activation solution, pH9 (Nichirei Corporation), for heat treatment. After the pretreatment, dual detection was achieved by DNA FISH following RNA FISH and fluorescent immunostaining. This protocol visualized gene abnormalities and protein overexpression on the same sections. Of note, in poorly differentiated tumors containing both normal and tumor cells, the tumor cells were clearly identified on the sections, and FISH signals could be counted in these cells. In addition, HER2 mRNA overexpression and gene amplification were simultaneously detected in HER2-positive gastric cancer. Thus, this method should be widely applicable in clinical settings.

  20. Semitransparent ZnO/poly(3,4-ethylenedioxythiophene) based hybrid inorganic/organic heterojunction thin film diodes prepared by combined radio-frequency magnetron-sputtering and electrodeposition techniques

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Moreno, Jorge; Navarrete-Astorga, Elena; Martin, Francisco [Laboratorio de Materiales y Superficies (Unidad Asociada al CSIC), Departamentos de Fisica Aplicada and Ing. Quimica, Universidad de Malaga, E29071 Malaga (Spain); Schrebler, Ricardo [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Casilla 4059, Valparaiso (Chile); Ramos-Barrado, Jose R. [Laboratorio de Materiales y Superficies (Unidad Asociada al CSIC), Departamentos de Fisica Aplicada and Ing. Quimica, Universidad de Malaga, E29071 Malaga (Spain); Dalchiele, Enrique A., E-mail: dalchiel@fing.edu.uy [Instituto de Fisica, Facultad de Ingenieria, Herrera y Reissig 565, C.C. 30, 11000 Montevideo (Uruguay)

    2012-12-15

    n-ZnO/p-poly(3,4-ethylenedioxythiophene) (PEDOT) semitransparent inorganic-organic hybrid vertical heterojunction thin film diodes have been fabricated with PEDOT and ZnO thin films grown by electrodeposition and radio-frequency magnetron-sputtering respectively, onto a tin doped indium oxide coated glass substrate. The diode exhibited an optical transmission of {approx} 40% to {approx} 50% in the visible region between 450 and 700 nm. The current-voltage (I-V) characteristics of the heterojunction show good rectifying diode characteristics, with a ratio of forward current to the reverse current as high as 35 in the range - 4 V to + 4 V. The I-V characteristic was examined in the framework of the thermionic emission model. The ideality factor and barrier height were obtained as 4.0 and 0.88 eV respectively. - Highlights: Black-Right-Pointing-Pointer Semitransparent inorganic-organic heterojunction thin film diodes investigated Black-Right-Pointing-Pointer n-ZnO/p-poly(3,4-ethylenedioxythipohene) used for the heterojunction Black-Right-Pointing-Pointer Diodes exhibited an optical transmission of {approx} 40%-{approx} 50% in the visible region Black-Right-Pointing-Pointer Heterojunction current-voltage features show good rectifying diode characteristics Black-Right-Pointing-Pointer A forward to reverse current ratio as high as 35 (- 4 V to + 4 V range) was attained.

  1. A Hybrid Imagination

    DEFF Research Database (Denmark)

    Jamison, Andrew; Christensen, Steen Hyldgaard; Botin, Lars

    contexts, or sites, for mixing scientific knowledge and technical skills from different fields and social domains into new combinations, thus fostering what the authors term a “hybrid imagination”. Such a hybrid imagination is especially important today, as a way to counter the competitive and commercial...

  2. Hybrid trajectory spaces

    NARCIS (Netherlands)

    Collins, P.J.

    2005-01-01

    In this paper, we present a general framework for describing and studying hybrid systems. We represent the trajectories of the system as functions on a hybrid time domain, and the system itself by its trajectory space, which is the set of all possible trajectories. The trajectory space is given a na

  3. Editorial: Hybrid Systems

    DEFF Research Database (Denmark)

    Olderog, Ernst-Rüdiger; Ravn, Anders Peter

    2007-01-01

    An introduction to three papers in a special issue on Hybrid Systems. These paper were first presented at an IFIP WG 2.2 meeting in Skagen 2005.......An introduction to three papers in a special issue on Hybrid Systems. These paper were first presented at an IFIP WG 2.2 meeting in Skagen 2005....

  4. DNA Microarray Technique

    Directory of Open Access Journals (Sweden)

    Thakare SP

    2012-11-01

    Full Text Available DNA Microarray is the emerging technique in Biotechnology. The many varieties of DNA microarray or DNA chip devices and systems are described along with their methods for fabrication and their use. It also includes screening and diagnostic applications. The DNA microarray hybridization applications include the important areas of gene expression analysis and genotyping for point mutations, single nucleotide polymorphisms (SNPs, and short tandem repeats (STRs. In addition to the many molecular biological and genomic research uses, this review covers applications of microarray devices and systems for pharmacogenomic research and drug discovery, infectious and genetic disease and cancer diagnostics, and forensic and genetic identification purposes.

  5. Interface Characteristics of Wood-hybrid Composites

    Institute of Scientific and Technical Information of China (English)

    XUEFenglian; ZHAOGuangjie

    2005-01-01

    In order to understand the current interface characteristics of wood-hybrid composites, this paper starts off from the concept of composite interface and general theory of interface form, then the inner-surface and microstructure of wood and the interface characteristics of composites, such as wood- inorganic, wood-plastic and wood- metal made by electroless plating technique, are concluded and discussed in detail. Meanwhile,on the basis of that, some points of view about how to develop the wood-hybrid composites interface research in the future are also proposed.

  6. Study of hybrid orientation structure wafer*

    Institute of Scientific and Technical Information of China (English)

    Tan Kaizhou; Zhang Jing; Xu Shiliu; Zhang Zhengfan; Yang Yonghui; Chen Jun; Liang Tao

    2011-01-01

    Two types of 5 μm thick hybrid orientation structure wafers, which were integrated by (110) or (100) orientation silicon wafers as the substrate, have been investigated for 15-40 V voltage ICs and MEMS sensor applications. They have been obtained mainly by SOI wafer bonding and a non-selective epitaxy technique, and have been presented in China for the first time. The thickness of BOX SiO2 buried in wafer is 220 nm. It has been found that the quality of hybrid orientation structure with (100) wafer substrate is better than that with (110) wafer substrate by “Sirtl defect etching of HOSW”.

  7. Hybrid reactors. [Fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.

    1980-09-09

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of /sup 233/U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m/sup -2/, and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid.

  8. Hybrid propulsion technology program

    Science.gov (United States)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  9. An IMRT/VMAT Technique for Nonsmall Cell Lung Cancer

    Directory of Open Access Journals (Sweden)

    Nan Zhao

    2015-01-01

    Full Text Available The study is to investigate a Hybrid IMRT/VMAT technique which combines intensity modulated radiation therapy (IMRT and volumetric modulated arc therapy (VMAT for the treatment of nonsmall cell lung cancer (NSCLC. Two partial arcs VMAT, 5-field IMRT, and hybrid plans were created for 15 patients with NSCLC. The hybrid plans were combination of 2 partial arcs VMAT and 5-field IMRT. The dose distribution of planning target volume (PTV and organs at risk (OARs for hybrid technique was compared with IMRT and VMAT. The monitor units (MUs and treatment delivery time were also evaluated. Hybrid technique significantly improved the target conformity and homogeneity compared with IMRT and VMAT. The mean delivery time of IMRT, VMAT, and hybrid plans was 280 s, 114 s, and 327 s, respectively. The mean MUs needed for IMRT, VMAT, and hybrid plans were 933, 512, and 737, respectively. Hybrid technique reduced V5, V10, V30, and MLD of normal lung compared with VMAT and spared the OARs better with fewer MUs with the cost of a little higher V5, V10, and mean lung dose (MLD of normal lung compared with IMRT. Hybrid IMRT/VMAT can be a viable radiotherapy technique with better plan quality.

  10. An IMRT/VMAT Technique for Nonsmall Cell Lung Cancer.

    Science.gov (United States)

    Zhao, Nan; Yang, Ruijie; Wang, Junjie; Zhang, Xile; Li, Jinna

    2015-01-01

    The study is to investigate a Hybrid IMRT/VMAT technique which combines intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) for the treatment of nonsmall cell lung cancer (NSCLC). Two partial arcs VMAT, 5-field IMRT, and hybrid plans were created for 15 patients with NSCLC. The hybrid plans were combination of 2 partial arcs VMAT and 5-field IMRT. The dose distribution of planning target volume (PTV) and organs at risk (OARs) for hybrid technique was compared with IMRT and VMAT. The monitor units (MUs) and treatment delivery time were also evaluated. Hybrid technique significantly improved the target conformity and homogeneity compared with IMRT and VMAT. The mean delivery time of IMRT, VMAT, and hybrid plans was 280 s, 114 s, and 327 s, respectively. The mean MUs needed for IMRT, VMAT, and hybrid plans were 933, 512, and 737, respectively. Hybrid technique reduced V5, V10, V30, and MLD of normal lung compared with VMAT and spared the OARs better with fewer MUs with the cost of a little higher V5, V10, and mean lung dose (MLD) of normal lung compared with IMRT. Hybrid IMRT/VMAT can be a viable radiotherapy technique with better plan quality.

  11. An IMRT/VMAT Technique for Nonsmall Cell Lung Cancer

    Science.gov (United States)

    Zhao, Nan; Yang, Ruijie; Wang, Junjie; Zhang, Xile; Li, Jinna

    2015-01-01

    The study is to investigate a Hybrid IMRT/VMAT technique which combines intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) for the treatment of nonsmall cell lung cancer (NSCLC). Two partial arcs VMAT, 5-field IMRT, and hybrid plans were created for 15 patients with NSCLC. The hybrid plans were combination of 2 partial arcs VMAT and 5-field IMRT. The dose distribution of planning target volume (PTV) and organs at risk (OARs) for hybrid technique was compared with IMRT and VMAT. The monitor units (MUs) and treatment delivery time were also evaluated. Hybrid technique significantly improved the target conformity and homogeneity compared with IMRT and VMAT. The mean delivery time of IMRT, VMAT, and hybrid plans was 280 s, 114 s, and 327 s, respectively. The mean MUs needed for IMRT, VMAT, and hybrid plans were 933, 512, and 737, respectively. Hybrid technique reduced V 5, V 10, V 30, and MLD of normal lung compared with VMAT and spared the OARs better with fewer MUs with the cost of a little higher V 5, V 10, and mean lung dose (MLD) of normal lung compared with IMRT. Hybrid IMRT/VMAT can be a viable radiotherapy technique with better plan quality. PMID:26539515

  12. Hybrid electrokinetic manipulation in high-conductivity media.

    Science.gov (United States)

    Gao, Jian; Sin, Mandy L Y; Liu, Tingting; Gau, Vincent; Liao, Joseph C; Wong, Pak Kin

    2011-05-21

    This study reports a hybrid electrokinetic technique for label-free manipulation of pathogenic bacteria in biological samples toward medical diagnostic applications. While most electrokinetic techniques only function in low-conductivity buffers, hybrid electrokinetics enables effective operation in high-conductivity samples, such as physiological fluids (∼1 S m(-1)). The hybrid electrokinetic technique combines short-range electrophoresis and dielectrophoresis, and long-range AC electrothermal flow to improve its effectiveness. The major technical hurdle of electrode instability for manipulating high conductivity samples is tackled by using a Ti-Au-Ti sandwich electrode and a 3-parallel-electrode configuration is designed for continuous isolation of bacteria. The device operates directly with biological samples including urine and buffy coats. We show that pathogenic bacteria and biowarfare agents can be concentrated for over 3 orders of magnitude using hybrid electrokinetics.

  13. Screening of proteins interacting with HSPC016 by yeast two-hybridization technique%用酵母双杂交技术筛选与HSPC016相互作用的蛋白

    Institute of Scientific and Technical Information of China (English)

    宋志强; 孙丽华; 郝飞

    2011-01-01

    目的 采用酵母双杂交技术筛选毛乳头细胞中与造血干细胞(hematopoietic stem/progenitor cells,HSPC)分化相关基因HSPC016相互作用的蛋白,了解其参与调控毛乳头细胞凝集性生长的分子机制.方法 应用酵母双杂交系统,将构建的pGBKT7-HSPC016诱饵质粒与含原代人毛乳头细胞cDNA文库质粒的酵母Y187进行配合,筛选与HSPC016相互作用的蛋白,通过回复性杂交试验验证其可靠性,并对阳性克隆进行测序和生物信息学分析.结果 筛选出4个与HSPC016有相互作用的蛋白,包括转录因子叉头框蛋白O1(forkhead box O1,FOXO1)、丝裂原活化蛋白激酶11、磷酸次黄苷酸激酶3调节亚单位3(PIK3R3)、肝X受体,它们均与细胞内能量代谢、转录调节相关.结论 HSPC016可能通过参与细胞内活性氧水平调节,并与细胞内参与能量和转录调节的相关信号分子相互作用,调节毛乳头细胞的凝集性生长状态.%Objective To screen and identify proteins interacting with hematopoietic stem/progenitor cell differentiation-related gene HSPC016, and to explore the molecular mechanism involved in the regulation by HSPC016 on the aggregative behavior of dermal papilla cells. Methods By using yeast two-hybridization,HSPC016 gene was sub-cloned into pGBKT7 to construct the bait plasmid (named as pGBKT7-HSPC016) in yeast AH109. The cDNA yeast expression library of human dermal papillae cells in yeast Y187 was screened with the bait plasmid and the proteins interacting with HSPC016 were identified. Yeast two-hybridization retransformation experiment was conducted to exclude the false positive clones and verify the interactions, then,the positive clones were sequenced and analyzed by using bioinformatic methods. Results The bait plasmid pGBKT7-HSPC016 was constructed successfully and there was no self-activation in or toxicity against yeast AH 109. Four proteins,including forkhead family of transcription factors (FOXO 1 ), mitogen

  14. High resolution imaging technique based on phase diversity hybrid method%基于相位差混合处理方法的高分辨力成像技术

    Institute of Scientific and Technical Information of China (English)

    李斐; 饶长辉

    2012-01-01

    为了提高成像系统的分辨能力,并尽量减小系统的复杂度,本文将相位差波前探测技术和相位差图像恢复技术结合起来构成相位差混合处理方法,给出了点目标和扩展目标情况下混合处理方法的数值仿真结果,并针对点目标情况进行了实验验证.实验表明,在像差较大的情况下,直接用事后处理方法无法得到满意的结果.在三种湍流强度下,经混合方法处理后得到光斑的半高宽分别由自适应光学系统校正后的5.1,5.1和5.0个像素减小到3.3,3.2和3.0个像素.可以看出,利用相位差混合处理方法得到的图像明显优于单独的事后图像处理方法和自适应光学校正,相位差混合处理方法在高分辨力成像领域有着巨大的应用潜力.%In order to improve the resolution of an imaging system and make the system as simple as possible,the wavefront sensing and the image post-processing using phase diversity are combined to form a new method,i.e.,phase diversity hybrid method,in this paper.The performance of this method is simulated for a point source and also for an extended source.An experimental platform is built based on a point source.The experimental results demonstrate that the acceptable results cannot be achieved by using single post-processing for large aberration.The full width half maximum of the light spot descends from 5.1 pixels,5.1 pixels,and 5.0 pixels which are corrected by adaptive optics to 3.3 pixels,3.2 pixels,and 3.0 pixels respectively.We can see that the quality of the image processed by phase diversity hybrid method is much better than that restored by post-processing method or corrected by adaptive optics only.It has a great potential application in the filed of high resolution imaging.

  15. Application of hybrid techniques (self-organizing map and fuzzy algorithm) using backscatter data for segmentation and fine-scale roughness characterization of seepage-related seafloor along the western continental margin of India

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, B.; Menezes, A.A.A.; Dandapath, S.; Fernandes, W.A.; Karisiddaiah, S.M.; Haris, K.; Gokul, G.S.

    (involving pockmarks and faulted structures) subjected to strong bottom currents and seasonal upwelling. Index Terms ─ Multi-beam backscatter, Seafloor classification and characterizations, Self-Organizing map (SOM), Fuzzy C- means (FCM), Power spectral..., ANN techniques were proposed for hydro-acoustic data classification [10]. The SOM exercises unsupervised competitive learning on the unknown dataset (input) onto coarser clusters i.e., primary classifications [11]. For real time survey applications...

  16. Fast hybridization solution for the detection of immobilized nucleic acids.

    Science.gov (United States)

    Yang, T T; Kain, S R

    1995-03-01

    We have developed a fast hybridization solution, termed ExpressHyb, for the rapid and sensitive detection of nucleic acids immobilized on membrane supports. This solution reduces typical hybridization times of 12-24 h to as little as 1 h while simultaneously increasing the sensitivity of detection in many applications. Using ExpressHyb, human beta-actin mRNA was detected on a human multiple tissue Northern (MTN) blot following a 30-min hybridization, with optimal detection occurring with a 1-h hybridization interval. The moderately abundant human glyceraldehyde-3-phosphate dehydrogenase (G3PDH) mRNA was detected using similar hybridization conditions and yielded improved signal-to-background characteristics relative to overnight hybridizations in conventional solutions. ExpressHyb can be used with either 32P- or digoxigenin-labeled probes and works effectively with both cDNA and oligonucleotide probes. For non-isotopic detection in particular, ExpressHyb reduces the nonspecific background commonly encountered with this technique. In cDNA library screening, ExpressHyb was found to both reduce the time required for effective hybridizations and to increase the number of positive colonies obtained relative to conventional overnight procedures. Taken together, these results illustrate the broad capability of ExpressHyb Hybridization Solution to improve nucleic acid detection in a variety of important techniques.

  17. Using whole mount in situ hybridization to link molecular and organismal biology

    National Research Council Canada - National Science Library

    Jacobs, Nicole L; Albertson, R Craig; Wiles, Jason R

    2011-01-01

    Whole mount in situ hybridization (WISH) is a common technique in molecular biology laboratories used to study gene expression through the localization of specific mRNA transcripts within whole mount specimen. This technique...

  18. Uncertainty Quantification in Hybrid Dynamical Systems

    CERN Document Server

    Sahai, Tuhin

    2011-01-01

    Uncertainty quantification (UQ) techniques are frequently used to ascertain output variability in systems with parametric uncertainty. Traditional algorithms for UQ are either system-agnostic and slow (such as Monte Carlo) or fast with stringent assumptions on smoothness (such as polynomial chaos and Quasi-Monte Carlo). In this work, we develop a fast UQ approach for hybrid dynamical systems by extending the polynomial chaos methodology to these systems. To capture discontinuities, we use a wavelet-based Wiener-Haar expansion. We develop a boundary layer approach to propagate uncertainty through separable reset conditions. We also introduce a transport theory based approach for propagating uncertainty through hybrid dynamical systems. Here the expansion yields a set of hyperbolic equations that are solved by integrating along characteristics. The solution of the partial differential equation along the characteristics allows one to quantify uncertainty in hybrid or switching dynamical systems. The above method...

  19. Uncertainty quantification in hybrid dynamical systems

    Science.gov (United States)

    Sahai, Tuhin; Pasini, José Miguel

    2013-03-01

    Uncertainty quantification (UQ) techniques are frequently used to ascertain output variability in systems with parametric uncertainty. Traditional algorithms for UQ are either system-agnostic and slow (such as Monte Carlo) or fast with stringent assumptions on smoothness (such as polynomial chaos and Quasi-Monte Carlo). In this work, we develop a fast UQ approach for hybrid dynamical systems by extending the polynomial chaos methodology to these systems. To capture discontinuities, we use a wavelet-based Wiener-Haar expansion. We develop a boundary layer approach to propagate uncertainty through separable reset conditions. We also introduce a transport theory based approach for propagating uncertainty through hybrid dynamical systems. Here the expansion yields a set of hyperbolic equations that are solved by integrating along characteristics. The solution of the partial differential equation along the characteristics allows one to quantify uncertainty in hybrid or switching dynamical systems. The above methods are demonstrated on example problems.

  20. 应用酵母双杂交技术筛选猪Calsarcin-2蛋白结合蛋白%Screening of Proteins Interacting with Porcine Calsarcin-2 by Yeast Two-hybrid Techniques

    Institute of Scientific and Technical Information of China (English)

    辛磊磊; 朱文娟; 杨锷; 陈大雷; 张宁波; 唐中林; 杨述林; 李奎

    2011-01-01

    Calsarcins是钙调磷酸酶肌小节特异性结合蛋白家族,本实验旨在研究Calsarcin-2(CS2)在猪骨骼肌纤维形成和信号通路调控中的功能.应用酵母双杂交方法筛选猪骨骼肌组织中CS2蛋白结合蛋白,从猪骨骼肌文库中筛选出180个阳性克隆,经分析得到12个相互作用的蛋白,研究发现骨骼肌α-肌动蛋白1(ACTA1),肌联蛋白(TTN)及钙调素1(CALM1)为CS2互作蛋白.ACTA1参与肌肉收缩过程,TTN调节肌小节动力传导及Z线装配,CALM1参与钙离子信号传导.结果表明,CS2在维持Z线结构稳定和参与钙离子信号传导方面起重要作用.%To elucidate the function of calsarcin-2 (CS2) in the formation of skeletal muscle fiber and signaling pathway regulation, we used yeast two-hybrid approach to look for CS2 interacting proteins. The porcine skeletal library screen gave 180 positive interactions, in which 12 interacting proteins were obtained. Bioinformation analysis found that actin alpha l(ACTAl), titin(TTN) and calmodulin 1 (CALM 1) were CS2 interaction partners. ACTA1 involved in the process of muscle contraction, TTN regulated the dynamics conduction of sarcomere and Z disc assembly, CALM 1 paticipated in calcium signal transduction. These results indicate that CS2 is implicated in the transduction of calcium signals and maintaining the structure of Z disc.

  1. Hybrid electric vehicles TOPTEC

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-21

    This one-day TOPTEC session began with an overview of hybrid electric vehicle technology. Updates were given on alternative types of energy storage, APU control for low emissions, simulation programs, and industry and government activities. The keynote speech was about battery technology, a key element to the success of hybrids. The TOPEC concluded with a panel discussion on the mission of hybrid electric vehicles, with a perspective from industry and government experts from United States and Canada on their view of the role of this technology.

  2. Hybrid systems with constraints

    CERN Document Server

    Daafouz, Jamal; Sigalotti, Mario

    2013-01-01

    Control theory is the main subject of this title, in particular analysis and control design for hybrid dynamic systems.The notion of hybrid systems offers a strong theoretical and unified framework to cope with the modeling, analysis and control design of systems where both continuous and discrete dynamics interact. The theory of hybrid systems has been the subject of intensive research over the last decade and a large number of diverse and challenging problems have been investigated. Nevertheless, many important mathematical problems remain open.This book is dedicated mainly to

  3. Hybrid Bloch Brane

    CERN Document Server

    Bazeia, D; Losano, L

    2016-01-01

    This work reports on models described by two real scalar fields coupled with gravity in the five-dimensional spacetime, with a warped geometry involving one infinite extra dimension. Through a mechanism that smoothly changes a thick brane into a hybrid brane, one investigates the appearance of hybrid branes hosting internal structure, characterized by the splitting on the energy density and the volcano potential, induced by the parameter which controls interactions between the two scalar fields. In particular, we investigate distinct symmetric and asymmetric hybrid brane scenarios.

  4. Hybrid Bloch brane

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Lima, Elisama E.M.; Losano, L. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil)

    2017-02-15

    This work reports on models described by two real scalar fields coupled with gravity in the five-dimensional spacetime, with a warped geometry involving one infinite extra dimension. Through a mechanism that smoothly changes a thick brane into a hybrid brane, one investigates the appearance of hybrid branes hosting internal structure, characterized by the splitting on the energy density and the volcano potential, induced by the parameter which controls interactions between the two scalar fields. In particular, we investigate distinct symmetric and asymmetric hybrid brane scenarios. (orig.)

  5. Hybrid silicon evanescent devices

    Directory of Open Access Journals (Sweden)

    Alexander W. Fang

    2007-07-01

    Full Text Available Si photonics as an integration platform has recently been a focus of optoelectronics research because of the promise of low-cost manufacturing based on the ubiquitous electronics fabrication infrastructure. The key challenge for Si photonic systems is the realization of compact, electrically driven optical gain elements. We review our recent developments in hybrid Si evanescent devices. We have demonstrated electrically pumped lasers, amplifiers, and photodetectors that can provide a low-cost, scalable solution for hybrid integration on a Si platform by using a novel hybrid waveguide architecture, consisting of III-V quantum wells bonded to Si waveguides.

  6. Su mmary of Seed Production Technique of Transgenic Herbicide-resistant Early Season Two-line Hybrid Rice Xiang 1 25 S/Bar68 -1%转基因抗除草剂两系杂交早稻香125 S/Bar68-1的制种技术

    Institute of Scientific and Technical Information of China (English)

    刘爱民; 蒋天智; 廖翠猛; 肖国樱

    2015-01-01

    This paper summarizes the spring-sowing seed production technique of transgenic herbicide -resistant early season two-line hybrid rice Xiang 125S/Bar68-1 in Lingling District,Yongzhou City,Hunan Province.The technique ap-proaches and parameters include selection of suitable place for seed production,choice of seed production season,risk eval-uation of male sterility fluctuation of male sterile line on heading stage,characters of parental lines,arrangement of seeding interval between parental lines,ideal heading date synchronization and forecasting standard,making up suitable populations of parental lines,and gibberellin application,etc.%总结了转基因抗除草剂两系杂交早稻香125S/Bar68-1在湖南省永州市零陵区的春播制种技术,包括适宜制种基地的选择、制种季节安排、母本不育性安全性分析、亲本特性、父母本播差期安排、理想花期相遇及预测标准、父母本群体培育技术、赤霉素喷施等措施。

  7. Breeding and Cultivation Technique of High-yield and High-quality Hybrid Maize Yundan 20 with Multiple Resistances%高产・多抗・优质玉米杂交种郧单20的选育及栽培技术

    Institute of Scientific and Technical Information of China (English)

    周刚; 李永学; 吴承国; 唐余成; 陈光勇; 王致云; 柯磊

    2016-01-01

    Yundan 20 is a high-yield and high-quality hybrid maize variety with multiple resistances , which is bred by Shiyan Academy of Agri-culture Sciences.Its female parent is WD01 bred by Shiyan Academy of Agriculture Sciences and male parent is T259 which is introduced.In 2016, Yundan 20 was approved by the Crop Variety Approval Committee of Hubei Province, with a variety approval number 2016005.The breed-ing process, integral characteristics, cultivation techniques and seed production techniques of Yundan 20 were summarized and analyzed , which aimed to promote the variety and meet market demand .%郧单20是湖北省十堰市农业科学院采用自选系WD01作母本、外引系T259作父本选育的高产、多抗、品种优良的玉米新品种,2016年通过湖北省农作物品种审定委员会审定,品种审定编号为2016005。通过对郧单20选育过程、综合特性、栽培技术、制种技术等方面进行总结和分析,以期推广该品种,满足市场需求。

  8. Chaotic mixer improves microarray hybridization.

    Science.gov (United States)

    McQuain, Mark K; Seale, Kevin; Peek, Joel; Fisher, Timothy S; Levy, Shawn; Stremler, Mark A; Haselton, Frederick R

    2004-02-15

    Hybridization is an important aspect of microarray experimental design which influences array signal levels and the repeatability of data within an array and across different arrays. Current methods typically require 24h and use target inefficiently. In these studies, we compare hybridization signals obtained in conventional static hybridization, which depends on diffusional target delivery, with signals obtained in a dynamic hybridization chamber, which employs a fluid mixer based on chaotic advection theory to deliver targets across a conventional glass slide array. Microarrays were printed with a pattern of 102 identical probe spots containing a 65-mer oligonucleotide capture probe. Hybridization of a 725-bp fluorescently labeled target was used to measure average target hybridization levels, local signal-to-noise ratios, and array hybridization uniformity. Dynamic hybridization for 1h with 1 or 10ng of target DNA increased hybridization signal intensities approximately threefold over a 24-h static hybridization. Similarly, a 10- or 60-min dynamic hybridization of 10ng of target DNA increased hybridization signal intensities fourfold over a 24h static hybridization. In time course studies, static hybridization reached a maximum within 8 to 12h using either 1 or 10ng of target. In time course studies using the dynamic hybridization chamber, hybridization using 1ng of target increased to a maximum at 4h and that using 10ng of target did not vary over the time points tested. In comparison to static hybridization, dynamic hybridization reduced the signal-to-noise ratios threefold and reduced spot-to-spot variation twofold. Therefore, we conclude that dynamic hybridization based on a chaotic mixer design improves both the speed of hybridization and the maximum level of hybridization while increasing signal-to-noise ratios and reducing spot-to-spot variation.

  9. Weather forecasting based on hybrid neural model

    Science.gov (United States)

    Saba, Tanzila; Rehman, Amjad; AlGhamdi, Jarallah S.

    2017-02-01

    Making deductions and expectations about climate has been a challenge all through mankind's history. Challenges with exact meteorological directions assist to foresee and handle problems well in time. Different strategies have been investigated using various machine learning techniques in reported forecasting systems. Current research investigates climate as a major challenge for machine information mining and deduction. Accordingly, this paper presents a hybrid neural model (MLP and RBF) to enhance the accuracy of weather forecasting. Proposed hybrid model ensure precise forecasting due to the specialty of climate anticipating frameworks. The study concentrates on the data representing Saudi Arabia weather forecasting. The main input features employed to train individual and hybrid neural networks that include average dew point, minimum temperature, maximum temperature, mean temperature, average relative moistness, precipitation, normal wind speed, high wind speed and average cloudiness. The output layer composed of two neurons to represent rainy and dry weathers. Moreover, trial and error approach is adopted to select an appropriate number of inputs to the hybrid neural network. Correlation coefficient, RMSE and scatter index are the standard yard sticks adopted for forecast accuracy measurement. On individual standing MLP forecasting results are better than RBF, however, the proposed simplified hybrid neural model comes out with better forecasting accuracy as compared to both individual networks. Additionally, results are better than reported in the state of art, using a simple neural structure that reduces training time and complexity.

  10. Hybrid models in loop quantum cosmology

    Science.gov (United States)

    Elizaga Navascués, Beatriz; Martín-Benito, Mercedes; Mena Marugán, Guillermo A.

    2016-06-01

    In the framework of Loop Quantum Cosmology (LQC), inhomogeneous models are usually quantized by means of a hybrid approach that combines loop quantization techniques with standard quantum field theory methods. This approach is based on a splitting of the phase space in a homogeneous sector, formed by global, zero-modes and an inhomogeneous sector, formed by the remaining, infinite number of modes, that describe the local degrees of freedom. Then, the hybrid quantization is attained by adopting a loop representation for the homogeneous gravitational sector, while a Fock representation is used for the inhomogeneities. The zero-mode of the Hamiltonian constraint operator couples the homogeneous and inhomogeneous sectors. The hybrid approach, therefore, is expected to provide a suitable quantum theory in regimes where the main quantum effects of the geometry are those affecting the zero-modes, while the inhomogeneities, still being quantum, can be treated in a more conventional way. This hybrid strategy was first proposed for the simplest cosmological midisuperspaces: the Gowdy models, and it has been later applied to the case of cosmological perturbations. This paper reviews the construction and main applications of hybrid LQC.

  11. Hybrid foundry patterns of bevel gears

    Directory of Open Access Journals (Sweden)

    Budzik G.

    2007-01-01

    Full Text Available Possibilities of making hybrid foundry patterns of bevel gears for investment casting process are presented. Rapid prototyping of gears with complex tooth forms is possible with the use of modern methods. One of such methods is the stereo-lithography, where a pattern is obtained as a result of resin curing with laser beam. Patterns of that type are applicable in precision casting. Removing of stereo-lithographic pattern from foundry mould requires use of high temperatures. Resin burning would generate significant amounts of harmful gases. In case of a solid stereo-lithographic pattern, the pressure created during gas burning may cause the mould to crack. A gas volume reduction may be achieved by using patterns of honeycomb structure. However, this technique causes a significant worsening of accuracy of stereo-lithographic patterns in respect of their dimensions and shape. In cooperation with WSK PZL Rzeszów, the Machine Design Department of Rzeszow University of Technology carried out research on the design of hybrid stereo-lithographic patterns. Hybrid pattern consists of a section made by stereo-lithographic process and a section made of casting wax. The latter material is used for stereo-lithographic pattern filling and for mould gating system. The hybrid pattern process consists of two stages: wax melting and then the burn-out of stereolithographic pattern. Use of hybrid patterns reduces the costs of production of stereolithographic patterns. High dimensional accuracy remains preserved in this process.

  12. 基于多种技术的混合式程序代码抄袭检测方法%Hybrid plagiarism detection method in program code based on multiple techniques

    Institute of Scientific and Technical Information of China (English)

    杨超

    2016-01-01

    Based on analyzing characteristics and drawbacks of the existing plagiarism detection system in program code, a hybrid plagiarism detection method combining text analysis, structure metrics and attribute counting is proposed. Firstly, the document fingerprinting technology and Winnowing algorithm are used to compute text similarity. Secondly, the program code is translated to a Dynamic Control Structure tree(DCS), and Winnowing algorithm is applied to estimate the DCS tree similarity which is structural similarity also. Then each variable information in code is collected and counted. The variable similarity algorithm is applied to analyze variable information node and get variable similarity. Finally, the text similarity, structural similarity and variable similarity are assigned a weight to compute the total code similarity. The experi-mental results show that the proposed method can effectively detect all kinds of plagiarism. To the different threshold values, the accuracy and the recall ratio of test results are higher than JPLAG system. Especially for the simple structure in program code, the average accuracy of testing results of the method and JPLAG system are 82.5%and 69.5%respectively. Conse-quently it shows that the proposed method is more effective.%在分析现有程序代码抄袭检测系统的特点及局限性的基础上,提出一种综合文本分析、结构度量和属性计数技术的混合式程序抄袭检测方法。应用文档指纹技术和Winnowing算法计算程序的文本相似度;将程序代码表示成动态控制结构树(Dynamic Control Structure tree,DCS),运用Winnowing算法计算DCS树相似度,从而得到结构相似度;收集并统计程序中的每个变量信息,应用变量相似度算法分析变量信息节点获取变量相似度;分别赋予文本相似度、结构相似度和变量相似度一个权值,计算得到总体的代码相似度。实验结果表明,所提出的方法能够有效

  13. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  14. Hybrid photon detectors

    CERN Document Server

    D'Ambrosio, C

    2003-01-01

    Hybrid photon detectors detect light via vacuum photocathodes and accelerate the emitted photoelectrons by an electric field towards inversely polarized silicon anodes, where they are absorbed, thus producing electron-hole pairs. These, in turn, are collected and generate electronic signals on their ohmic contacts. This review first describes the characteristic properties of the main components of hybrid photon detectors: light entrance windows, photocathodes, and silicon anodes. Then, essential relations describing the trajectories of photoelectrons in electric and magnetic fields and their backscattering from the silicon anodes are derived. Depending on their anode configurations, three families of hybrid photon detectors are presented: hybrid photomultiplier tubes with single anodes for photon counting with high sensitivity and for gamma spectroscopy; multi-anode photon detector tubes with anodes subdivided into square or hexagonal pads for position-sensitive photon detection; imaging silicon pixel array t...

  15. Functional hybrid materials

    National Research Council Canada - National Science Library

    Fahmi, Amir; Pietsch, Torsten; Mendoza, Cesar; Cheval, Nicolas

    2009-01-01

    .... This paper describes our group's achievements towards the development of multifunctional nanostructures via self-assembly of hybrid systems based on the block copolymer PS-b-P4VP and inorganic nanoparticles (NPs...

  16. Hybrid Rocket Technology

    Directory of Open Access Journals (Sweden)

    Sankaran Venugopal

    2011-04-01

    Full Text Available With their unique operational characteristics, hybrid rockets can potentially provide safer, lower-cost avenues for spacecraft and missiles than the current solid propellant and liquid propellant systems. Classical hybrids can be throttled for thrust tailoring, perform in-flight motor shutdown and restart. In classical hybrids, the fuel is stored in the form of a solid grain, requiring only half the feed system hardware of liquid bipropellant engines. The commonly used fuels are benign, nontoxic, and not hazardous to store and transport. Solid fuel grains are not highly susceptible to cracks, imperfections, and environmental temperature and are therefore safer to manufacture, store, transport, and use for launch. The status of development based on the experience of the last few decades indicating the maturity of the hybrid rocket technology is given in brief.Defence Science Journal, 2011, 61(3, pp.193-200, DOI:http://dx.doi.org/10.14429/dsj.61.518

  17. Nitrous Paraffin Hybrid Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nitrous Oxide Paraffin Hybrid engine (N2OP) is a proposed technology designed to provide small launch vehicles with high specific impulse, indefinitely storable...

  18. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  19. Hybridity in Disgrace

    Institute of Scientific and Technical Information of China (English)

    刘建平

    2015-01-01

    John Maxwell Coetzee's masterpiece-Disgrace is the representative work about post colonialism.The novel describes a series of disgraceful events happened between the white and the black in the post apartheid South Africa.The famous literature theory-hybridity of Homi K.Bhabha is the very key theory to analyze the work.In post apartheid South Africa,hybridity is the only way for the white and the black to coexist.

  20. Hybrid Baryon Signatures

    CERN Document Server

    Page, P R

    2000-01-01

    We discuss whether a low-lying hybrid baryon should be defined as a three quark - gluon bound state or as three quarks moving on an excited adiabatic potential. We show that the latter definition becomes exact, not only for very heavy quarks, but also for specific dynamics. We review the literature on the signatures of hybrid baryons, with specific reference to strong hadronic decays, electromagnetic couplings, diffractive production and production in psi decay.

  1. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  2. Requirements for Hybrid Cosimulation

    Science.gov (United States)

    2014-08-16

    hybrid cosimulation version of the Functional Mockup Interface (FMI) standard. A cosimulation standard de nes interfaces that enable diverse simulation...cosimulation standards, and specifically provides guidance for development of a hybrid cosimulation version of the Functional Mockup Interface (FMI) standard...V. Peetz, and S. Wolf. The functional mockup interface for tool independent exchange of simulation models. In Proc. of the 8-th International

  3. 关节镜下联合修补技术治疗内侧半月板桶柄样撕裂20例临床分析%Arthroscopic hybrid suture technique for repairing 20 bucket-handle tear of inside meniscus

    Institute of Scientific and Technical Information of China (English)

    麦鸿飞; 冯光; 黎国权; 覃海宁

    2011-01-01

    Objective To investigate the arthroscopic inside-out repairing technique(hybrid suture technique) for bucket-handle tear of inside meniscus and present the short-term clinical outcome. Methods Twenty patients with 20 repairable inside meniscus tears were enrolled. With arthroscopic technique,the midbody portion and anterior portion of the lesion were repaired using standard inside-out technique with vertical and interlacing tibial and femoral side arrangement. For the most posterior portion, all-inside suture technique with two posterior portals were performed. For isolated red-white zone tears,fibrin clot was implanted into the repaired region for enhancing the healing pro-ACL injuries were reconstructed simultaneously. Results Twenty patients with 20 meniscal repairs were available for 5-36 (19.2 ± 2.3)months follow-up. Eighteen cases were asymptomatic at the latest clinical evaluation,and joint space tenderness in 2 cases. Twenty cases received MRI evaluation during follow-up, showing that 15 menisci were completely healed, 5 partially healed. Postoperative Lysholm scores of the knee joint function [82-97(90.3 ±1.5) points] were significantly improved compared with their preoperative scores [45-69 (56.7 ± 2.0)points] (P = 0.024).Conclusion For meniscal tears involving red-red and red-white zones,arthroscopic hybrid suture technique provides stable strength along the whole length of injured region, and consequently achieves satisfactory clinical outcomes.%目的 探讨关节镜下联合修补技术治疗内侧半月板桶柄样撕裂的临床疗效.方法 采用关节镜下联合修补技术修补20例(20个)内侧半月板桶柄样撕裂,均累及内侧半月板后角至前体部区域.半月板体部和前角采用标准的自内向外缝合;半月板后角采用全关节内缝合:经两个后内侧入路在关节内完成垂直褥式缝合.单纯的红-白交界处撕裂修补后局部植入血凝块促进愈合,合并前十字韧带损伤者同

  4. Carboxylated nitrile butadiene rubber/hybrid filler composites

    Directory of Open Access Journals (Sweden)

    Ahmad Mousa

    2012-08-01

    Full Text Available The surface properties of the OSW and NLS are measured with the dynamic contact-angle technique. The x-ray photoelectron spectroscopy (XPS of the OSW reveals that the OSW possesses various reactive functional groups namely hydroxyl groups (OH. Hybrid filler from NLS and OSW were incorporated into carboxylated nitrile rubber (XNBR to produce XNBR hybrid composites. The reaction of OH groups from the OSW with COOH of the XNBR is checked by attenuated total reflectance spectra (ATR-IR of the composites. The degree of curing ΔM (maximum torque-minimum torque as a function of hybrid filler as derived from moving die rheometer (MDR is reported. The stress-strain behavior of the hybrid composites as well as the dynamic mechanical thermal analysis (DMTA is studied. Bonding quality and dispersion of the hybrid filler with and in XNBR are examined using scanning-transmission electron microscopy (STEM in SEM.

  5. Design of a novel 3-DOF hybrid mechanical arm

    Institute of Scientific and Technical Information of China (English)

    LI YanBiao; JIN ZhenLin; JI ShiMing

    2009-01-01

    Parameter optimization for a novel 3-DOF hybrid mechanical arm was presented by using a statistics method called the statistics parameters optimization method based on index atlases.Several kinematics and mechanics performance evaluation indices were proposed and discussed,according to the kinematics and mechanics analyses of the mechanical arm.Considering the assembly technique,a prototype of the 3-DOF hybrid mechanical arm was developed,which provided a basis for applications of the 3-DOF hybrid mechanical arm.The novel 3-DOF hybrid mechanical arm can be applied to the modern industrial fields requiring high stiffness,lower inertia and good technological efficiency.A novel 6-DOF hybrid humanoid mechanical arm was built,in which the present mechanical arm was connected with a spherical 3-DOF parallel manipulator.

  6. Evaluation of different genetic procedures for the generation of artificial hybrids in Saccharomyces genus for winemaking.

    Science.gov (United States)

    Pérez-Través, Laura; Lopes, Christian A; Barrio, Eladio; Querol, Amparo

    2012-05-15

    Several methods based on recombinant DNA techniques have been proposed for yeast strain improvement; however, the most relevant oenological traits depend on a multitude of loci, making these techniques difficult to apply. In this way, hybridization techniques involving two complete genomes became interesting. Natural hybrid strains between different Saccharomyces species have been detected in diverse fermented beverages including wine, cider and beer. These hybrids seem to be better adapted to fluctuating situations typically observed in fermentations due to the acquisition of particular physiological properties of both parental strains. In this work we evaluated the usefulness of three different hybridization methods: spore to spore mating, rare-mating and protoplast fusion for the generation of intra- and inter-specific stable hybrids, being the first report about the comparison of different methods to obtain artificial hybrids to be used in fermentations. Spore to spore mating is an easy but time-consuming method; hybrids generated with this technique could lack some of the industrially relevant traits present in the parental strains because of the segregation occurred during meiosis and spore generation prior to hybridization. Hybrids obtained by protoplast fusion get the complete information of both parents but they are currently considered as genetically modified organisms (GMOs). Finally, hybrids obtained by rare-mating are easily obtained by the optimized methodology described in this work, they originally contain a complete set of chromosomes of both parents and they are not considered as GMOs. Hybrids obtained by means of the three methodological approaches showed a high genetic variability; however, a loss of genetic material was detected in most of them. Based on these results, it became evident that a last crucial aspect to be considered in every hybridization program is the genetic stabilization of recently generated hybrids that guarantee its

  7. Heat-capacity measurements on small samples: The hybrid method

    NARCIS (Netherlands)

    Klaasse, J.C.P.; Brück, E.H.

    2008-01-01

    A newly developed method is presented for measuring heat capacities on small samples, particularly where thermal isolation is not sufficient for the use of the traditional semiadiabatic heat-pulse technique. This "hybrid technique" is a modification of this heat-pulse method in case the temperature

  8. Heat-capacity measurements on small samples: The hybrid method

    NARCIS (Netherlands)

    Klaasse, J.C.P.; Brück, E.H.

    2008-01-01

    A newly developed method is presented for measuring heat capacities on small samples, particularly where thermal isolation is not sufficient for the use of the traditional semiadiabatic heat-pulse technique. This "hybrid technique" is a modification of this heat-pulse method in case the temperature

  9. Development and Optimization of Hybrid Friction Materials Consisting of Nanoclay and Carbon Nanotubes by using Analytical Hierarchy Process (AHP and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS under Fuzzy Atmosphere

    Directory of Open Access Journals (Sweden)

    Tej SINGH

    2013-07-01

    Full Text Available The tribo-performance of nanoclay and multi-walled carbon nanotube (MWNT filled and graphite lubricated phenolic composites, reinforced with a combination of lapinus and kevlar fibers, have been evaluated on a Kraus friction testing machine. The combined fuzzy analytical hierarchy process (FAHP and fuzzy technique for order preference by similarity to ideal solution (FTOPSIS approach, taking into account performance defining attributes (PDAs such as friction performance, wear, friction-fade, friction-recovery, stability coefficient, variability coefficient, friction fluctuations and temperature rise of the disc, was used for the performance assessment of fabricated friction composite materials. The weight of different PDAs were evaluated by FAHP; μ-performance (0.144, 0.255, 0.435, wear (0.144, 0.255, 0.435, fade-% (0.073, 0.15, 0.307, recovery-% (0.063, 0.126, 0.268, stability coefficient (0.037, 0.075, 0.156, variability coefficient (0.032, 0.063, 0.136, frictional fluctuations (0.023, 0.037, 0.069, and DTR (0.023, 0.037, 0.069 respectively.  FTOPSIS was employed to determine the optimal ranking of the friction composite materials as NC-7>NC-8>NC-6>NC-5>NC-3>NC-4>NC-2>NC-1. The alternative with kevlar: lapinus, 2.5:27.5 wt-% and graphite: nanoclay: carbon nanotube, 2.25:2.75 wt-% exhibits the optimal properties.

  10. Spoken Language Identification Using Hybrid Feature Extraction Methods

    CERN Document Server

    Kumar, Pawan; Mishra, A N; Chandra, Mahesh

    2010-01-01

    This paper introduces and motivates the use of hybrid robust feature extraction technique for spoken language identification (LID) system. The speech recognizers use a parametric form of a signal to get the most important distinguishable features of speech signal for recognition task. In this paper Mel-frequency cepstral coefficients (MFCC), Perceptual linear prediction coefficients (PLP) along with two hybrid features are used for language Identification. Two hybrid features, Bark Frequency Cepstral Coefficients (BFCC) and Revised Perceptual Linear Prediction Coefficients (RPLP) were obtained from combination of MFCC and PLP. Two different classifiers, Vector Quantization (VQ) with Dynamic Time Warping (DTW) and Gaussian Mixture Model (GMM) were used for classification. The experiment shows better identification rate using hybrid feature extraction techniques compared to conventional feature extraction methods.BFCC has shown better performance than MFCC with both classifiers. RPLP along with GMM has shown be...

  11. Detection of chromosomal abnormalities by comparative genomic hybridization.

    Science.gov (United States)

    Lapierre, Jean-Michel; Tachdjian, Gérard

    2005-04-01

    Comparative genomic hybridization (CGH) is a modified in-situ hybridization technique. In this type of analysis, two differentially labeled genomic DNAs (study and reference) are cohybridized to normal metaphase spreads or to microarray. Chromosomal locations of copy number changes in the DNA segments of the study genome are revealed by a variable fluorescence intensity ratio along each target chromosome. Thus, CGH allows detection and mapping of DNA sequence copy differences between two genomes in a single experiment. Since its development, comparative genomic hybridization has been applied mostly as a research tool in the field of cancer cytogenetics to identify genetic changes in many previously unknown regions. It is also a powerful tool for detection and identification of unbalanced chromosomal abnormalities in prenatal, postnatal and preimplantation diagnostics. The development of comparative genomic hybridization and increase in resolution analysis by using the microarray-based technique offer new information on chromosomal pathologies and thus better management of patients.

  12. Hybrid Monte Carlo with Chaotic Mixing

    CERN Document Server

    Kadakia, Nirag

    2016-01-01

    We propose a hybrid Monte Carlo (HMC) technique applicable to high-dimensional multivariate normal distributions that effectively samples along chaotic trajectories. The method is predicated on the freedom of choice of the HMC momentum distribution, and due to its mixing properties, exhibits sample-to-sample autocorrelations that decay far faster than those in the traditional hybrid Monte Carlo algorithm. We test the methods on distributions of varying correlation structure, finding that the proposed technique produces superior covariance estimates, is less reliant on step-size tuning, and can even function with sparse or no momentum re-sampling. The method presented here is promising for more general distributions, such as those that arise in Bayesian learning of artificial neural networks and in the state and parameter estimation of dynamical systems.

  13. CLINICAL STUDY OF CHROMOSOMAL ABNORMALITY IN MISSED ABORTION TISSUE DETECTED BY FLUORESCENCE IN SITU HYBRIDIZATION TECHNIQUE%FISH 技术检测稽留流产组织中染色体异常的临床研究

    Institute of Scientific and Technical Information of China (English)

    王春珺; 于晶峰

    2014-01-01

    目的:探讨稽留流产胎儿组织细胞中染色体异常总发生率及异常种类和各种异常的发生率。方法:采用18号、X 和 Y 染色体着丝粒探针及13、16、21、22号染色体单一序列探针,对105例稽留流产胎儿组织进行FISH 检测。结果:49.5%的稽留流产是由胎儿染色体异常引起的;染色体异常的前3位为三倍体,16号染色体三体,X 单体,分别占染色体异常总发生率的32.7%、15.4%和15.4%;高龄组(≥35岁)和非高龄组(0.05);妊娠≤12wk和妊娠>12wk者染色体异常率分别为60.9%和31.7%,差异有统计学意义(P0. 05). The detection rate of chromosomal abnormality in the cases of ≤12 gestational weeks was 60. 9%,while the detection rate of chromosomal abnormality in the cases of >12 gestational weeks was 31. 7%,there was significant difference(P<0. 05). Conclusion:Most missed abortion are caused by genetic gene defect, FISH technique can detect aborted fetuses, find chromosomal abnormality rapidly and accurately,provide data for genetic counseling of subsequent pregnancy.

  14. Assessment of metastatic colorectal cancer with hybrid imaging: comparison of reading performance using different combinations of anatomical and functional imaging techniques in PET/MRI and PET/CT in a short case series

    Energy Technology Data Exchange (ETDEWEB)

    Brendle, C.; Schwenzer, N.F.; Rempp, H.; Schmidt, H.; Pfannenberg, C.; Nikolaou, K.; Schraml, C. [Eberhard Karls University, Diagnostic and Interventional Radiology, Department of Radiology, Tuebingen (Germany); La Fougere, C. [Eberhard Karls University, Nuclear Medicine, Department of Radiology, Tuebingen (Germany)

    2016-01-15

    The purpose was to investigate the diagnostic performance of different combinations of anatomical and functional imaging techniques in PET/MRI and PET/CT for the evaluation of metastatic colorectal cancer lesions. Image data of 15 colorectal cancer patients (FDG-PET/CT and subsequent FDG-PET/MRI) were retrospectively evaluated by two readers in five reading sessions: MRI (morphology) alone, MRI/diffusion-weighted MRI (DWI), MRI/PET, MRI/DWI/PET; and PET/CT. Diagnostic performance of lesion detection with each combination was assessed in general and organ-based. The reference standard was given by histology and/or follow-up imaging. Separate analysis of mucinous tumours was performed. One hundred and eighty lesions (110 malignant) were evaluated (intestine n = 6, liver n = 37, lymph nodes n = 55, lung n = 4, and peritoneal n = 74). The overall lesion-based diagnostic accuracy was 0.46 for MRI, 0.47 for MRI/DWI, 0.57 for MRI/PET, 0.69 for MRI/DWI/PET and 0.66 for PET/CT. In the organ-based assessment, MRI/DWI/PET showed the highest accuracy for liver metastases (0.74), a comparable accuracy to PET/CT in peritoneal lesions (0.55), and in lymph node metastases (0.84). The accuracy in mucinous tumour lesions was limited in all modalities (MRI/DWI/PET = 0.52). PET/MRI including DWI is comparable to PET/CT in the evaluation of colorectal cancer metastases, with a markedly higher accuracy when using combined imaging data than the modalities separately. Further improvement is needed in the imaging of peritoneal carcinomatosis and mucinous tumours. (orig.)

  15. Microcontact Printing Techniques in Bioscience

    Institute of Scientific and Technical Information of China (English)

    FENG Xi-zeng; HOU Sun; CHAN Qi-lin; WANG Li-kai; QIN Ming; HAN Pei-dong

    2004-01-01

    The microcontact printing(μCP) technology available for patterning protein, DNA hybridization, immunoassay and cellular cocultures onto solid surface are reviewed. This review describes some of the techniques currently employed for creating two-dimensional biomolecular microarray, and the research results regarding their effectiveness. In addition, the applications of the impact of μCP technology in the field of biosciences are also presented.

  16. The hybrid performance of the Pierre Auger Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Mostafa, Miguel, A.; /New Mexico U.

    2005-08-01

    The Pierre Auger Observatory detects ultra-high energy cosmic rays by implementing two complementary air-shower techniques. The combination of a large ground array and fluorescence detectors, known as the hybrid concept, means that a rich variety of measurements can be made on a single shower, providing much improved information over what is possible with either detector alone. In this paper the hybrid reconstruction approach and its performance are described.

  17. ABOUT HYBRID BIDIRECTIONAL ASSOCIATIVE MEMORY NEURAL NETWORKS WITH DISCRETE DELAYS

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this paper, hybrid bidirectional associative memory neural networks with discrete delays is considered. By ingeniously importing real parameters di > 0(i = 1,2,···,n) which can be adjusted, we establish some new sufficient conditions for the dynamical characteristics of hybrid bidirectional associative memory neural networks with discrete delays by the method of variation of parameters and some analysis techniques. Our results generalize and improve the related results in [10,11]. Our work is significant...

  18. Hybridization between Gossypium herbaceum and Gossypium stochsii through embryo rescue

    Institute of Scientific and Technical Information of China (English)

    GILLMANJEETS; YPSBAJAJ

    1996-01-01

    Nutrient media and culture conditions have been defined for ovules 3 and 5 d after pollination and embryos of Gossypium herbaceum respectively.The technique was then used to produce interspecific hybrids between a cultivated Gossypium herbaceum and a wild species,G.stocksii.The hybrid plants were transferred to field and they exhibited most of the characters of the pollen parent i.e.G.stocksii.

  19. Production of Fine Metallic Powders by Hybrid Atomization Process

    Science.gov (United States)

    Minagawa, Kazumi; Liu, Yunzhong; Kakisawa, Hideki; Halada, Kohmei

    Hybrid Atomization is a recently developed powder-making process that combines effectively free-fall gas atomization and centrifugal atomization. This technique can produce very fine spherical powders with mean diameters of around 10 micrometers, and in high yields. The present report discusses the concept and basic principles of hybrid atomization. Process experiments were carried out and the optimal processing conditions were obtained. The results show that the influences of processing parameters and optimum conditions differ greatly between the proposed and the conventional atomization processes. A new correlation of atomization equation applicable to hybrid atomization is proposed and discussed.

  20. New Hybrid Genetic Algorithm for Vertex Cover Problems

    Institute of Scientific and Technical Information of China (English)

    霍红卫; 许进

    2003-01-01

    This paper presents a new hybrid genetic algorithm for the vertex cover problems in which scan-repair and local improvement techniques are used for local optimization. With the hybrid approach, genetic algorithms are used to perform global exploration in a population, while neighborhood search methods are used to perform local exploitation around the chromosomes. The experimental results indicate that hybrid genetic algorithms can obtain solutions of excellent quality to the problem instances with different sizes. The pure genetic algorithms are outperformed by the neighborhood search heuristics procedures combined with genetic algorithms.