WorldWideScience

Sample records for hybridization gish electronic

  1. Insight into octoploid strawberry (Fragaria) subgenome composition revealed by GISH analysis of pentaploid hybrids.

    Science.gov (United States)

    Liu, Bo; Poulsen, Elizabeth G; Davis, Thomas M

    2016-02-01

    As the product of interspecific hybridization between its two ancestral octoploid (2n = 8x = 56) species (Fragaria chiloensis and F. virginiana), the cultivated strawberry (F. ×ananassa) is among the most genomically complex of crop plants, harboring subgenomic components derived from as many as four different diploid ancestors. To physically visualize the octoploids' subgenome composition(s), we launched molecular cytogenetic studies using genomic in situ hybridization (GISH), comparative GISH (cGISH), and rDNA-FISH techniques. First, GISH resolution in Fragaria was tested by using diploid and triploid hybrids with predetermined genome compositions. Then, observation of an octoploid genome was implemented by hybridizing chromosomes of pentaploid (2n = 5x = 35) hybrids from F. vesca × F. virginiana with genomic DNA probes derived from diploids (2n = 2x = 14) F. vesca and F. iinumae, which have been proposed by phylogenetic studies to be closely related to the octoploids yet highly divergent from each other. GISH and cGISH results indicated that octoploid-derived gametes (n = 4x = 28) carried seven chromosomes with hybridization affinities to F. vesca, while the remaining 21 chromosomes displayed varying affinities to F. iinumae, indicating differing degrees of subgenomic contribution to the octoploids by these two putatively ancestral diploids. Combined rDNA-FISH revealed severe 25S rDNA loss in both the F. vesca- and F. iinumae-like chromosome groups, while only the prior group retained its 5S loci.

  2. Characterization of B chromosomes in Lilium hybrids through GISH and FISH

    NARCIS (Netherlands)

    Xie, S.L.; Marasek-Ciolakowska, A.; Ramanna, M.S.; Arens, P.F.P.; Visser, R.G.F.; Tuyl, van J.M.

    2014-01-01

    Supernumerary (B) chromosomes and small aberrant chromosomes were detected in Lilium hybrids and characterized through genomic in situ hybridization (GISH) and florescence in situ hybridization (FISH). Two small, supernumerary or B chromosomes were detected as extra chromosomes in a tetraploid plant

  3. Identification of Intergeneric Hybrid Plants Between Oryza sativa and O. minuta via GISH and RAPD

    Institute of Scientific and Technical Information of China (English)

    YU Shun-wu; CHEN Bao-tang; TAO Ai-lin; ZHANG Duan-pin

    2003-01-01

    To transfer desirable resistance traits from O. minuta to O. sativa, intergeneric hybrid plants between O. sativa (AA, 2n=2X=24) and O. minuta (BBCC, 2n=4X=48) were produced by embryo rescue after sexual cross. Morphological observation and chromosome counts indicated their hybrid status (ABC, 2n =3X=36). Genomic in situ hybridization (GISH) was further applied to confirm the parentage of the chromosomes of F1 hybrids. Chromosomes of O. minuta and O. sativa were distinguishable in the hybrids in different fluorescence colors. GISH indicated that A and BC chromosomes were not randomly assembled in a cell.RAPD profiles unequivocally revealed their hybrids with double parent patterns. The results of blast tests showed that the hybrids had obtained disease resistance from O. minuta, and had a level of susceptibility between the parents.

  4. GISH Analysis of Subsequent Progeny Crossed with 2n-gametes of F-1 Oriental-Asiatic Interspecific Hybrid in Lily

    NARCIS (Netherlands)

    Chung, M.Y.; Chung, J.D.; Tuyl, van J.M.; Lim, K.B.

    2009-01-01

    This study was carried out to analyze the chromosome composition and homoeologous recombination of subsequent progenies, derived from cross of Oriental-Asiatic (OA) interspecific hybrid producing 2n-gametes, by GISH technique. GISH analysis of F-1 OA interspecific hybrid '2nOA-001', which produced 2

  5. GISH, AFLP and PCR-RFLP analysis of an intergeneric somatic hybrid combining Goutou sour orange and Poncirus trifoliata.

    Science.gov (United States)

    Fu, C H; Chen, C L; Guo, W W; Deng, X X

    2004-11-01

    Intergeneric somatic hybrids combining Goutou sour orange (Citrus aurantium L.) with trifoliate orange Poncirus trifoliata (L.) Raf] were produced by electrofusion and their genetic inheritance analyzed by amplified fragment length polymorphism (AFLP), genomic in situ hybridization (GISH), and PCR-restriction fragment length polymorphism (PCR-RFLP). Sixteen mini-calluses were obtained after 20 days of culture; they all developed into embryoids on EME500 medium. Following several subcultures on shoot induction medium for a total culture period of 6 months, shoots regenerated. The plants grew vigorously with a well-developed root system and exhibited the trifoliate leaf character of P. trifoliata. Ploidy analysis verified that all of the regenerates were tetraploids (2 n=4 x=36) as expected. GISH analysis confirmed that 18 chromosomes came from trifoliate orange and the remaining 18 from Goutou sour orange, as with most symmetric somatic hybrid plants; moreover, chromosome translocations were also observed in one plant. AFLP analysis of 16 regenerates and their fusion parents indicated that all of the somatic hybrids except one were genetically uniform. Analysis of the somatic hybrid cytoplasmic genomes with universal primers revealed that their chloroplast DNA (cpDNA) banding patterns were identical to those of the mesophyll parent trifoliate orange, while their mitochondria (mt) genomes were of the callus parent sour orange. The potential of GISH in Citrus somatic hybrid analysis is discussed.

  6. Variability of ribosomal DNA sites in Festuca pratensis, Lolium perenne, and their intergeneric hybrids, revealed by FISH and GISH.

    Science.gov (United States)

    Ksiazczyk, T; Taciak, M; Zwierzykowski, Z

    2010-01-01

    This study focuses on the variability of chromosomal location and number of ribosomal DNA (rDNA) sites in some diploid and autotetraploid Festuca pratensis and Lolium perenne cultivars, as well as on identification of rDNA-bearing chromosomes in their triploid and tetraploid F. pratensis × L. perenne hybrids. The rDNA loci were mapped using fluorescence in situ hybridization (FISH) with 5S and 25S rDNA probes, and the origin of parental genomes was verified by genomic in situ hybridization (GISH) with L. perenne genomic DNA as a probe, and F. pratensis genomic DNA as a block. FISH detected variation in the number and chromosomal location of both 5S and 45S rDNA sites. In F. pratensis mostly additional signals of 5S rDNA loci occurred, as compared with standard F. pratensis karyotypes. Losses of 45S rDNA loci were more frequent in L. perenne cultivars and intergeneric hybrids. Comparison of the F. pratensis and L. perenne genomes approved a higher number of rDNA sites as well as variation in chromosomal rDNA location in L. perenne. A greater instability of F. pratensis-genome-like and L. perenne-genome-like chromosomes in tetraploid hybrids was revealed, indicating gains and losses of rDNA loci, respectively. Our data indicate that the rDNA loci physically mapped on chromosomes 2 and 3 in F. pratensis and on chromosome 3 in L. perenne are useful markers for these chromosomes in intergeneric Festuca × Lolium hybrids.

  7. Analysis of F1 hybrid and BC1 monosomic alien addition line plants from Brassica oleracea × Sinapis alba by GISH

    Institute of Scientific and Technical Information of China (English)

    WEI Wenhui; ZHANG Sufeng; LI Jun; WANG Lijun; CHEN Bo; FANG Xiaoping; WANG Zhuan; LUO Lixia

    2006-01-01

    Sterile and semi-fertile F1 plants were obtained by intergeneric sexual hybridization between paternal Brassica oleracea var. alboglabra (genome CC, 2n=18) and maternal Sinapis alba (genome SS, 2n=24), BC1 plants were obtained by backcrossing between paternal B. oleracea and maternal semi-fertile F1 plants. Genomic in situ hybridization (GISH) combined with dual-colour fluorescence in situ hybridization (dcFISH) showed that sterile F1 plants contained 21 chromosomes consisting of one B. oleracea chromosome set and one S.alba chromosome set, belonging to expected hybrids,and semi-fertile F1 plants contained 30 chromosomes consisting of two B. oleracea chromosome sets and one S. alba chromosome set. It is obvious that the semi-fertile F1 plants belong to unexpected hybrids.1 -3 trivalents were detected at meiotic metaphase I of semi-fertile F1 pollen mother cells (PMCs). Different separation ratios of S chromosomes were detected at anaphase I. A monosomic alien addition line(MAAL) was identified by GISH-dcFISH from BC1plants; it contained 19 chromosomes consisting of 18 C chromosomes and 1 S chromosome. At meiotic metaphase I, 9 divalents from B. oleracea and one univalent from S. alba could be detected. Sometimes,one putative C-S trivalent could also be detected.The achievement of B. oleracea-S, alba monosomic alien addition lines lays a foundation for gene introgression, location and cloning.

  8. Simultaneous visualization of different genomes (J, JSt and St) in a Thinopyrum intermedium × Thinopyrum ponticum synthetic hybrid (Poaceae) and in its parental species by multicolour genomic in situ hybridization (mcGISH).

    Science.gov (United States)

    Kruppa, Klaudia; Molnár-Láng, Márta

    2016-01-01

    Multicolour genomic in situ hybridization (mcGISH) using total genomic DNA probes from Thinopyrum bessarabicum (Săvulescu & Rayss, 1923) Á. Löve, 1984 (genome J(b) or E(b), 2n = 14), and Pseudoroegneria spicata (Pursh, 1814) Á. Löve, 1980 (genome St, 2n = 14) was used to characterize the mitotic metaphase chromosomes of a synthetic hybrid of Thinopyrum intermedium (Host, 1805) Barkworth & D.R. Dewey, 1985 and Thinopyrum ponticum (Podpěra, 1902) Z.-W. Liu et R.-C.Wang, 1993 named "Agropyron glael" and produced by N.V. Tsitsin in the former Soviet Union. The mcGISH pattern of this synthetic hybrid was compared to its parental wheatgrass species. Hexaploid Thinopyrum intermedium contained 19 J, 9 J(St) and 14 St chromosomes. The three analysed Thinopyrum ponticum accessions had different chromosome compositions: 43 J + 27 J(St) (PI531737), 40 J + 30 J(St) (VIR-44486) and 38 J + 32 J(St) (D-3494). The synthetic hybrid carried 18 J, 28 J(St) and 8 St chromosomes, including one pair of J-St translocation and/or decreased fluorescent intensity, resulting in unique hybridization patterns. Wheat line Mv9kr1 was crossed with the Thinopyrum intermedium × Thinopyrum ponticum synthetic hybrid in Hungary in order to transfer its advantageous agronomic traits (leaf rust and yellow rust resistance) into wheat. The chromosome composition of a wheat/A.glael F1 hybrid was 21 wheat + 28 wheatgrass (11 J + 14 J(St)+ 3 S). In the present study, mcGISH involving the simultaneous use of St and J genomic DNA as probes provided information about the type of Thinopyrum chromosomes in a Thinopyrum intermedium/Thinopyrum ponticum synthetic hybrid called A. glael.

  9. Primary investigation on GISH-NOR in cotton

    Institute of Scientific and Technical Information of China (English)

    LIU Sanhong; WANG Kunbo; SONG Guoli; WANG Chunying; LIU Fang; LI Shaohui; ZHANG Xiangdi; WANG Yuhong

    2005-01-01

    Six loci of nucleolar organizer region (NOR) were detected in genomic in situ hybridization (GISH) of cotton (Gossypium). NOR was the characteristic of 45S rDNA but could be generated by genomic DNA (gDNA) extracted from Gossypium species as probe. With twice FISH to the same mitotic cell of G. herbaceum or G. hirsutum, number, position and size for NORs generated from 45S rDNA and gDNA were identified largely similar or even the same. The NORs with gDNA as probe were therefore permanently defined as GISH-NORs. GISH-NORs from G. hirsutum and G. raimondii mitotic images were all terminal types. Four and two GISH-NORs from G. herbaceum (var. africanum) were terminal and centromere types, respectively. Six GISH-NORs in G. hirsutum were chromosome mapped with two in A- and four in D-subgenomes. There were also GISH-NORs in mitotic image of G. raimondii with its own gDNA as probe. From mitotic image of G. herbaceum with its own gDNA as probe, GISH-NOR could not be observed but non-whole- recovery of hybridized signals was distinguished. These non-whole-recovery of hybridized signals were detected on long arm terminals of most chromosomes and especially existed in nearly half long arm of a pair of chromosomes in G. herbaceum gDNA probed itself GISH image, which may be possibly induced by low copy genes within the regions rather than inter-subgenomic segment translocations. GISH-NORs in G. hirsutum mitotic images were dominantly observed when gDNAs from D and A genome species were used as probes and block, respectively, but not when the reverse probe and block gDNA from the two diploid progenitor genomes were designed. There may be two speculations to this special phenomenon: rDNA concerted evolution; content of rDNA in genome D more than genome A.

  10. Chromosome painting by GISH and multi-color FISH

    Science.gov (United States)

    Fluorescent in situ hybridization (FISH) is a powerful cytogenetic technique for identifying chromosomes and mapping specific genes and DNA sequences on individual chromosomes. Genomic in situ hybridization (GISH) and multi-color FISH (mc-FISH) represent two special types of FISH techniques. Both ...

  11. Hybrid printed electronics

    NARCIS (Netherlands)

    Koetse, M.; Smits, E.; Rubingh, E.; Teunissen, P.; Kusters, R.; Abbel, R.; Brand, J. van den

    2016-01-01

    Although many electronic functionalities can be realized by printed or organic electronics, short-term marketable products often require robust, reproducible, and nondisturbing technologies. In this chapter we show how hybrid electronics, a combination of printed circuitry, thin-film electronics,

  12. GISH Analysis of Interspecific Hybrid between Brassica juncea and B.carinata%芥菜型油菜与埃塞俄比亚芥杂种基因组原位杂交分析

    Institute of Scientific and Technical Information of China (English)

    杨续蕊; 李勤菲; 葛贤宏; 李再云; 钱伟

    2013-01-01

    Brassica carinata originating from Africa with good adaptation in drought and hot environments is an important genetic source to improve B. juncea, which has been widely sown in the northwest of China. The technique of genomic in situ hybridization( GISH) was adopted to investigate the chromosome segregation of interspecific hybrid (ACBB,2n = 35 ) between B. juncea and B. carinata during meiosis stage. The predominant segregation pattern of chromosomes was 17: 18 in pollen mother cells( PMCs) ,followed by 16: 19, while lagged chromosomes were occasionally observed. And the major segregation pattern of B-genome chromosomes from two species was 8:8. The results suggested that it would be possible to transfer the genetic component of B. carinata into B. juncea via homologous recombination within B genome and homologous recombination among three genomes.%原产于非洲的埃塞俄比亚芥(Brassica carinata,2n=34,BBCC)具有适应于炎热干旱地区种植等特点,是改良我国芥菜型油菜(B.juncea,2n=36,AABB)的重要种质资源.本研究用基因组原位杂交方法(GISH,Genomic in situ hybridization)分析了芥菜型油菜与埃塞俄比亚芥种间杂种花粉母细胞的染色体分离,发现在后期Ⅰ染色体主要以17:18类型分离,其次是16:19,染色体落后现象偶然发生,其中B染色体组以8:8的分离比率较高,表明不同来源的B染色体可正常配对分离.本研究表明,芥菜型油菜与埃塞俄比亚芥远缘杂交,通过染色体同源重组(B染色体间),以及部分同源染色体配对交换的方式(A、B、C基因组间),有可能将埃塞俄比亚芥优良遗传成分转移到芥菜型油菜中.

  13. Genome analysis of 7 Kengyilia (Triticeae Poaceae) species with FISH and GISH

    Science.gov (United States)

    Genome composition of and genetic relationships among seven Kengyilia species were assessed using a technique of sequential FISH (fluorescence in situ hybridization) and GISH (genomic in situ hybridization). Five of these 7 species, K. kokonorica, K. rigidula, K. hirsula, K. grandiglumis, and K. th...

  14. Chromosomal Constitution and Karyotype of Intergeneric F1 Hybrids Between Saccharum spp.and Erianthus fulvus Based on GISH%基于GISH的甘蔗与蔗茅属间杂交F1后代染色体组成及核型分析

    Institute of Scientific and Technical Information of China (English)

    王先宏; 杨清辉; 李富生; 何丽莲; 何顺长

    2011-01-01

    [Objective] The objective of current experiment was to study the chromosomal constitution and karyotype of F1 hybrids that derived from sexual cross between cultivated sugarcane (Saccharum spp.) and Erianthusfulvus. [Method] Both monocolor and bicolor GISH (Genomic in situ hybridization) were performed using digoxigenin-labeled E. fulvus DNA and biotin-labeled female parental DNA as probes, the karyotypes of 3 hybrids were analyzed based on the result of GISHs. [ Result ] The results of GISHs revealed the transmission of 7 to 10 E. fulvus chromosomes into progenies. The chromosomes of E. fulvus were broken because of the female parents prevented alien genetic materials from introgressing during distant hybridization and resulted in elimination and fragmentation of E. fulvus chromosomes. The GISH result on nuclear of progeny showed the chromatins came from male and female parent are not intermixed and stays at different regions. The karyotype formulas of 3 hybrids were 2n=92=80m (4SAT)+12sm.2n=88=82m+6sm and 2n=88=78m(2SAT)+10sm, and their karyotypes were 2C, 2C and 2B, respectively. [Conclusion]Chromosomal constitution of F1 hybrids that derived from sexual cross between cultivated sugarcane (Saccharum spp.) and E. fulvus were n+n and 2n+n. The results of karpotype analysis showed that the chromosomes of these three progenies are primitive.%[目的]探讨甘蔗(Saccharum spp.)与蔗茅(Erianthus fulvus)杂交F1材料的染色体组成及核型差异.[方法]以甘蔗与蔗茅间杂交所获得的16份F1材料为研究对象进行单色及双色基因组原位杂交(genomic in situ hybridization,GISH)研究,在GISH的基础上对3份材料的中期染色体进行核型分析.[结果]GISH的研究结果表明,子代材料中具有7-10条不等的父本染色体; 由于母本遗传物质对父本遗传物质的排斥作用引起的染色体消减及片段化导致父本染色体在于代中有断裂的现象;研究结果表明,在间期核中亲本染色质

  15. Characterization of genome in tetraploid StY species of Elymus (Triticeae: Poaceae) using sequential FISH and GISH.

    Science.gov (United States)

    Liu, Ruijuan; Wang, Richard R-C; Yu, Feng; Lu, Xingwang; Dou, Quanwen

    2017-08-01

    Genomes of ten species of Elymus, either presumed or known as tetraploid StY, were characterized using fluorescence in situ hybridization (FISH) and genomic in situ hybridization (GISH). These tetraploid species could be grouped into three categories. Type I included StY genome reported species-Roegneria pendulina, R. nutans, R. glaberrima, R. ciliaris, and Elymus nevskii, and StY genome presumed species-R. sinica, R. breviglumis, and R. dura, whose genome could be separated into two sets based on different GISH intensities. Type I genome constitution was deemed as putative StY. The St genome were mainly characterized with intense hybridization with pAs1, fewer AAG sites, and linked distribution of 5S rDNA and 18S-26S rDNA, while the Y genome with less intense hybridization with pAs1, more varied AAG sites, and isolated distribution of 5S rDNA and 18S-26S rDNA. Nevertheless, further genomic variations were detected among the different StY species. Type II included E. alashanicus, whose genome could be easily separated based on GISH pattern. FISH and GISH patterns suggested that E. alashanicus comprised a modified St genome and an unknown genome. Type III included E. longearistatus, whose genome could not be separated by GISH and was designated as St(l)Y(l). Notably, a close relationship between S(l) and Y(l) genomes was observed.

  16. FISH and GISH: molecular cytogenetic tools and their applications in ornamental plants.

    Science.gov (United States)

    Younis, Adnan; Ramzan, Fahad; Hwang, Yoon-Jung; Lim, Ki-Byung

    2015-09-01

    The innovations in chromosome engineering have improved the efficiency of interrogation breeding, and the identification and transfer of resistance genes from alien to native species. Recent advances in molecular biology and cytogenetics have brought revolutionary, conceptual developments in mitosis and meiosis research, chromosome structure and manipulation, gene expression and regulation, and gene silencing. Cytogenetic studies offer integrative tools for imaging, genetics, epigenetics, and cytological information that can be employed to enhance chromosome and molecular genomic research in plant taxa. In situ hybridization techniques, such as fluorescence in situ hybridization (FISH) and genomic in situ hybridization (GISH), can identify chromosome morphologies and sequences, amount and distribution of various types of chromatin in chromosomes, and genome organization during the metaphase stage of meiosis. Over the past few decades, various new molecular cytogenetic applications have been developed. The FISH and GISH techniques present an authentic model for analyzing the individual chromosome, chromosomal segments, or the genomes of natural and artificial hybrid plants. These have become the most reliable techniques for studying allopolyploids, because most cultivated plants have been developed through hybridization or polyploidization. Moreover, introgression of the genes and chromatin from the wild types into cultivated species can also be analyzed. Since hybrid derivatives may have variable alien chromosome numbers or chromosome arms, the use of these approaches opens new avenues for accurately identifying genome differences.

  17. Genome analysis of seven species of Kengyilia (Triticeae: Poaceae) with FISH and GISH.

    Science.gov (United States)

    Dou, Quanwen; Wang, Richard R-C; Lei, Yuting; Yu, Feng; Li, Yuan; Wang, Haiqing; Chen, Zhiguo

    2013-11-01

    The genome compositions and genetic relationships of seven species of Kengyilia were assessed using a sequential fluorescence in situ hybridization (FISH) and genomic in situ hybridization (GISH) technique. Five species, K. kokonorica, K. rigidula, K. hirsuta, K. grandiglumis, and K. thoroldiana, are native to Qinghai (China). The other two, K. alatavica and K. batalinii, are distributed in Xinjiang (China) and Kyrgyzstan, respectively. Each chromosome could be easily identified using chromosome markers (45S rDNA, 5S rDNA, pAs1, and AAG repeats) by FISH and allocated to the St, P, or Y genome by GISH. Molecular karyotype comparison indicated that K. alatavica and K. batalinii were distinct from the Qinghai species in all three genomes. These results support that the species of Kengyilia from Central Asia and the Qinghai-Tibetan plateau have independent origins. Genomic differentiation was still detected among the species of Kengyilia from Qinghai. Specifically, a common species-specific pericentric inversion was identified in both K. grandiglumis and K. thoroldiana, and an identical St-P non-Robertsonian translocation was frequently detected in K. hirsuta. The Qinghai species formed three genetic groups, K. kokonorica-K. rigidula, K. hirsuta, and K. grandiglumis-K. thoroldiana. The possible role of species-specific inversions and translocations in the evolution of StPY species is discussed.

  18. NextFlex Flexible Hybrid Electronics Manufacturing

    Science.gov (United States)

    2016-10-01

    and innovators, along with a robust U.S. network of manufacturing nodes, to advance a national flexible hybrid electronics (FHE) manufacturing...methods to scale up today’s FHE laboratory experiments into smart , affordable products. FHE manufacturing en- compasses innovative electronic...The software design tools will encompass multiphysics simulation (e.g., electrical , thermal, mechanical, etc., interactions based on first principles

  19. The Uptodate Advance and Use of Genomic in situ Hybridization (GISH) in Plant%基因组原位杂交的新进展及其在植物中的应用

    Institute of Scientific and Technical Information of China (English)

    余舜武; 张端品; 宋运淳

    2001-01-01

    @@基因组原位杂交(Genomic in situ hybridization GISH)是20世纪80年化末发展起来的一种原位杂交技术。它最初应用于动物方面的研究[1],但很快被植物方面所借用,并且使用频率高于动物方面的研究。

  20. Triple Hybrid Energy Harvesting Interface Electronics

    Science.gov (United States)

    Uluşan, H.; Chamanian, S.; Pathirana, W. M. P. R.; Zorlu, Ö.; Muhtaroğlu, A.; Külah, H.

    2016-11-01

    This study presents a novel triple hybrid system that combines simultaneously generated power from thermoelectric (TE), vibration-based electromagnetic (EM) and piezoelectric (PZT) harvesters for a relatively high power supply capability. In the proposed solution each harvesting source utilizes a distinct power management circuit that generates a DC voltage suitable for combining the three parallel supplies. The circuits are designed and implemented in 180 nm standard CMOS technology, and are terminated with a schottky diode to avoid reverse current flow. The harvested AC signal from the EM harvester is rectified with a self-powered AC-DC doubler, which utilizes active diode structures to minimize the forward- bias voltage drop. The PZT interface electronics utilizes a negative voltage converter as the first stage, followed by synchronous power extraction and DC-to-DC conversion through internal switches, and an external inductor. The ultra-low voltage DC power harvested by the TE generator is stepped up through a charge-pump driven by an LC oscillator with fully- integrated center-tapped differential inductors. Test results indicate that hybrid energy harvesting circuit provides more than 1 V output for load resistances higher than 100 kΩ (10 μW) where the stand-alone harvesting circuits are not able to reach 1 V output. This is the first hybrid harvester circuit that simultaneously extracts energy from three independent sources, and delivers a single DC output.

  1. Establishment of GISH Technique in Citrus%柑橘基因组原位杂交(GISH)技术体系的建立

    Institute of Scientific and Technical Information of China (English)

    陈春丽; 郭文武; 邓秀新

    2003-01-01

    通过改进实验方法,建立起柑橘基因组原位杂交(Genomic in situ hybridization,GISH)分析技术,并成功地应用于属间有性杂种鉴定,为进一步分析柑橘体细胞杂种核基因组组成奠定了基础.柑橘的染色体制片以去壁低渗-火焰干燥法较好,容易获得大量清晰、分散的有丝分裂中期相,且杂质较少.切刻平移法生物素(Biotin)标记探针,标记基因组总DNA与封阻基因组总DNA的浓度比例为1∶50时,能有效分开属间杂种枳橙中来自双亲的染色体.

  2. Comparative genomic in situ hybridization analysis on the ...

    African Journals Online (AJOL)

    AJL

    2012-04-10

    Apr 10, 2012 ... different parents/ancestors/genomes in hybrid plants to be distinguished ... sequences in common between the two species. Therefore, cGISH ... genomic organization and genome evolution in plants. (Zoller et al., 2001).

  3. GISH and BAC-FISH study of apomictic Beta M14

    Institute of Scientific and Technical Information of China (English)

    GE Yan; HE GuangChun; WANG ZhiWei; GUO DeDong; QIN Rui; LI RongTian

    2007-01-01

    Apomixis is a means of asexual reproduction by which plants produce embryos without fertilization and meiosis, therefore the embryo is of clonal and maternal origin. Interspecific hybrids between diploid B. vulgaris (2n=2x=18) and tetraploid B. corolliflora (2n=4x=36) were established, and then backcrossed with B. vulgaris. Among their offspring, monosomic addition line M14 (2n=2x=18+1) was selected because of the apomictic phenotype. We documented chromosome transmission from B. corolliflora into M14 by using genomic in situ hybridization (GISH). Suppression of cross-hybridization by blocking DNA was not necessary, indicating that the investigated Beta genome contains sufficient species-specific DNA, thus enabling the determination of genomic composition of the hybrids. We analyzed BAC microarrays of B. corolliflora chromosome 9 by using fluorescence-specific mRNA of B.vulgaris and Beta M14. BAC clones 16-M11 and 26-L15 were detected as fluorescence-specifics of BAC DNA of Beta M14. Then both BAC clones 16-M11 and 26-L15 were in situ hybridized to M14 chromosomes. The two hybridized BAC clones were located close to the telomere region of the long arm of a single chromosome 9, and showed hemizygosity. The results of BAC microarrays showed that these developments of embryo and endosperm have conservative expression patterns, indicating that sexual reproduction and apomixis have an interrelated pathway with common regulatory components and that the induction of a modified sexual reproduction program may enable the manifestation of apomixis in Beta species. It would be sufficient for the expression of apomixes with those apomictic-specific genes on chromosome 9 of B. corolliflora.

  4. GISH and BAC-FISH study of apomictic Beta M14

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Apomixis is a means of asexual reproduction by which plants produce embryos without fertilization and meiosis,therefore the embryo is of clonal and maternal origin.Interspecific hybrids between dip-loid B.vulgaris(2n=2x=18)and tetraploid B.corolliflora(2n=4x=36)were established,and then back-crossed with B.vulgaris.Among their offspring,monosomic addition line M14(2n=2x=18+1)was se-lected because of the apomictic phenotype.We documented chromosome transmission from B.corol-liflora into M14 by using genomic in situ hybridization(GISH).Suppression of cross-hybridization by blocking DNA was not necessary,indicating that the investigated Beta genome contains sufficient species-specific DNA,thus enabling the determination of genomic composition of the hybrids.We analyzed BAC microarrays of B.corolliflora chromosome 9 by using fluorescence-specific mRNA of B.vulgaris and Beta M14.BAC clones 16-M11 and 26-L15 were detected as fluorescence-specifics of BAC DNA of Beta M14.Then both BAC clones 16-M11 and 26-L15 were in situ hybridized to M14 chromo-somes.The two hybridized BAC clones were located close to the telomere region of the long arm of a single chromosome 9,and showed hemizygosity.The results of BAC microarrays showed that these developments of embryo and endosperm have conservative expression patterns,indicating that sexual reproduction and apomixis have an interrelated pathway with common regulatory components and that the induction of a modified sexual reproduction program may enable the manifestation of apomixis in Beta species.It would be sufficient for the expression of apomixes with those apomictic-specific genes on chromosome 9 of B.corolliflora.

  5. SECURED ELECTRONIC VOTING PROTOCOL USING HYBRID CRYPTOSYSTEM

    Directory of Open Access Journals (Sweden)

    KALAICHELVI V

    2013-04-01

    Full Text Available Electronic Voting play a really vital role in the democracy of our life. In this paper, we propose an electronic voting protocol. Our scheme does not require a special voting channel and communication can occur entirely over the current Internet. This method integrates the Internet convenience and cryptology. In the existing protocol the Tallier has to wait until the decryption key is received from the voter. So it will consume lot of time. But, the proposed protocol is based on the hybrid cryptosystem. In this, the ballot is encrypted using faster secret key algorithm and the digital envelope is encrypted using Tallier’s public key. So, the Tallier will decrypt the digital envelope using his own private key to get the secret key and then the encrypted ballot is decrypted using that secret key. So, comparatively the proposed protocol consumes less time. This paper also analyzes the various security issues involved in an electronic voting like security, privacy, authentication, anonymous, uniqueness, accuracy, fairness, efficiency and uncoercibility.

  6. Mixed protonic and electronic conductors hybrid oxide synaptic transistors

    Science.gov (United States)

    Fu, Yang Ming; Zhu, Li Qiang; Wen, Juan; Xiao, Hui; Liu, Rui

    2017-05-01

    Mixed ionic and electronic conductor hybrid devices have attracted widespread attention in the field of brain-inspired neuromorphic systems. Here, mixed protonic and electronic conductor (MPEC) hybrid indium-tungsten-oxide (IWO) synaptic transistors gated by nanogranular phosphorosilicate glass (PSG) based electrolytes were obtained. Unique field-configurable proton self-modulation behaviors were observed on the MPEC hybrid transistor with extremely strong interfacial electric-double-layer effects. Temporally coupled synaptic plasticities were demonstrated on the MPEC hybrid IWO synaptic transistor, including depolarization/hyperpolarization, synaptic facilitation and depression, facilitation-stead/depression-stead behaviors, spiking rate dependent plasticity, and high-pass/low-pass synaptic filtering behaviors. MPEC hybrid synaptic transistors may find potential applications in neuron-inspired platforms.

  7. Hybrid simulation of electron cyclotron resonance heating

    CERN Document Server

    Ropponen, T; Suominen, P; Koponen, T K; Kalvas, T; Koivisto, H

    2008-01-01

    Electron Cyclotron Resonance (ECR) heating is a fundamentally important aspect in understanding the physics of Electron Cyclotron Resonance Ion Sources (ECRIS). Absorption of the radio frequency (RF) microwave power by electron heating in the resonance zone depends on many parameters including frequency and electric field strength of the microwave, magnetic field structure and electron and ion density profiles. ECR absorption has been studied in the past by e.g. modelling electric field behaviour in the resonance zone and its near proximity. This paper introduces a new ECR heating code that implements damping of the microwave power in the vicinity of the resonance zone, utilizes electron density profiles and uses right hand circularly polarized (RHCP) electromagnetic waves to simulate electron heating in ECRIS plasma.

  8. Hybrid simulation of electron cyclotron resonance heating

    Energy Technology Data Exchange (ETDEWEB)

    Ropponen, T. [Department of Physics, University of Jyvaeskylae, P.O. Box 35, FI-40014 (Finland)], E-mail: tommi.ropponen@phys.jyu.fi; Tarvainen, O. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Suominen, P. [CERN Geneve 23, CH-1211 (Switzerland); Koponen, T.K. [Department of Physics, University of Jyvaeskylae, Nanoscience Center, P.O. Box 35, FI-40014 (Finland); Kalvas, T.; Koivisto, H. [Department of Physics, University of Jyvaeskylae, P.O. Box 35, FI-40014 (Finland)

    2008-03-11

    Electron Cyclotron Resonance (ECR) heating is a fundamentally important aspect in understanding the physics of Electron Cyclotron Resonance Ion Sources (ECRIS). Absorption of the radio frequency (RF) microwave power by electron heating in the resonance zone depends on many parameters including frequency and electric field strength of the microwave, magnetic field structure and electron and ion density profiles. ECR absorption has been studied in the past by e.g. modelling electric field behaviour in the resonance zone and its near proximity. This paper introduces a new ECR heating code that implements damping of the microwave power in the vicinity of the resonance zone, utilizes electron density profiles and uses right hand circularly polarized (RHCP) electromagnetic waves to simulate electron heating in ECRIS plasma.

  9. Uniqueness of the Gossypium mustelinum Genome Revealed by GISH and 45S rDNA FISH

    Institute of Scientific and Technical Information of China (English)

    Qiong Wu; Fang Liu; Shaohui Li; Guoli Song; Chunying Wang; Xiangdi Zhang; Yuhong Wang

    2013-01-01

    Gossypium mustelinum ((AD)4) is one of five disomic species in Gossypium.Three 45S ribosomal DNA (rDNA) loci were detected in (AD)4 with 45S rDNA as probe,and three pairs of brighter signals were detected with genomic DNA (gDNA) of Gossypium D genome species as probes.The size and the location of these brighter signals were the same as those detected with 45S rDNA as probe,and were named GISH-NOR.One of them was super-major,which accounted for the fact that about one-half of its chromosome at metaphase was located at chromosome 3,and other two were minor and located at chromosomes 5 and 9,respectively.All GISH-NORs were located in A sub-genome chromosomes,separate from the other four allopolypioid cotton species.GISH-NOR were detected with D genome species as probe,but not A.The greatly abnormal sizes and sites of (AD)4 NORs or GISH-NORs indicate a possible mechanism for 45S rDNA diversification following (AD)4 speciation.Comparisons of GISH intensities and GISH-NOR production with gDNA probes between A and D genomes show that the better relationship of (AD)4 is with A genome.The shortest two chromosomes of A sub-genome of G.mustelinum were shorter than the longest chromosome of D sub-genome chromosomes.Therefore,the longest 13 chromosomes of tetraploid cotton being classified as A sub-genome,while the shorter 13 chromosomes being classified as D sub-genome in traditional cytogenetic and karyotype analyses may not be entirely correct.

  10. Technique for Measuring Hybrid Electronic Component Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Green, C.C.; Hernandez, C.L.; Hosking, F.M.; Robinson, D.; Rutherford, B.; Uribe, F.

    1999-01-01

    Materials compatibility studies of aged, engineered materials and hardware are critical to understanding and predicting component reliability, particularly for systems with extended stockpile life requirements. Nondestructive testing capabilities for component reliability would significantly enhance lifetime predictions. For example, if the detection of crack propagation through a solder joint can be demonstrated, this technique could be used to develop baseline information to statistically determine solder joint lifelengths. This report will investigate high frequency signal response techniques for nondestructively evaluating the electrical behavior of thick film hybrid transmission lines.

  11. Hybrid electronics and electrochemistry with conjugated polymers.

    Science.gov (United States)

    Inganäs, Olle

    2010-07-01

    In this critical review, we discuss the history and development of polymer devices wherein manipulation of the electronic conductivity by electrochemical redox processes in a conjugated polymer is used to form new functions. The devices employed are an electrochemical transistor, an electrolyte-gated field-effect transistor and light-emitting electrochemical cells, all of which combine doping/undoping of a conjugated polymer with modification of electronic transport (130 references).

  12. Photoinduced Reductive Electron Transfer in LNA:DNA Hybrids

    DEFF Research Database (Denmark)

    Wenge, Ulrike; Wengel, Jesper; Wagenknecht, Hans-Achim

    2012-01-01

    Lock it, but not too much: LNA units (locked or bridging nucleic acids) in LNA:DNA hybrids lead to a negative effect on electron transfer (ET), but they also force the nucleic acid structure in the A-type double helix, which allows a better base stacking than the normal B-type and thus positively...... influences the ET. This result is significant for the design of nucleic acids of molecular electronics....

  13. Genome composition of 'Elatior'-begonias hybrids analyzed by genomic in situ hybridisation

    NARCIS (Netherlands)

    Marasek Ciolakowska, A.R.; Ramanna, M.S.; Laak, W.A.; Tuyl, van J.M.

    2010-01-01

    Interspecific hybridization of various tuberous Begonia species hybrids with Begonia socotrana results in so-called 'Elatior'-begonias hybrids (B. x hiemalis Fotsch). In our study, genomic in situ hybridization (GISH) has been employed to assess the genome composition in eleven 'Elatior'-begonias

  14. Electrostatic electron cyclotron instabilities near the upper hybrid layer due to electron ring distributions

    Science.gov (United States)

    Eliasson, B.; Speirs, D. C.; Daldorff, L. K. S.

    2016-09-01

    A theoretical study is presented of the electrostatic electron cyclotron instability involving Bernstein modes in a magnetized plasma. The presence of a tenuous thermal ring distribution in a Maxwellian plasma decreases the frequency of the upper hybrid branch of the electron Bernstein mode until it merges with the nearest lower branch with a resulting instability. The instability occurs when the upper hybrid frequency is somewhat above the third, fourth, and higher electron cyclotron harmonics, and gives rise to a narrow spectrum of waves around the electron cyclotron harmonic nearest to the upper hybrid frequency. For a tenuous cold ring distribution together with a Maxwellian distribution an instability can take place also near the second electron cyclotron harmonic. Noise-free Vlasov simulations are used to assess the theoretical linear growth-rates and frequency spectra, and to study the nonlinear evolution of the instability. The relevance of the results to laboratory and ionospheric heating experiments is discussed.

  15. [Comparative molecular cytogenetic characterization of partial wheat-wheatgrass hybrids].

    Science.gov (United States)

    Krupin, P Yu; Divashuk, M G; Belov, V I; Glukhova, L I; Aleksandrov, O S; Karlov, G I

    2011-04-01

    The chromosomal composition of the Zernokormovaya 169, Istra 1, Ostankinskaya, and Otrastayushchaya 38 cultivars of octoploid partial wheat-wheatgrass hybrids was studied using genomic in situ hybridization (GISH). Differentiation of wheatgrass chromosomes by the distribution of the GISH signal along the chromosome was revealed. The wheatgrass chromosomes of the hybrid cultivars studied in the work differed in the type of differentiation, centromeric index, and absolute size. The cytogenetic distinctions of these chromosomes revealed by us can be used in making crosses and in studying the transmission through gametes of additional wheatgrass chromosomes.

  16. Electronic properties of hybrid metal-discotic liquid crystal nanostructures

    Science.gov (United States)

    Kelsall, R. W.; Pecchia, A.; Bourlange, A.; Movaghar, B.; Evans, S. D.; Hickey, B. J.; Boden, N.

    2003-04-01

    A new class of hybrid organic/inorganic nanostructures, comprising self-organised discotic liquid crystal layers deposited on ultrathin metal films, has been investigated both experimentally and theoretically. Calculations show that the periodic self-organised molecular layer gives rise to a new, hybrid electronic bandstructure, resulting in modulation of the metal film conductivity. In situ conductivity measurements during deposition of such self-organised layers confirm that the metal film conductivity is altered. Theoretical modeling also shows that the AC conductivity should show structure related to the carrier trapping and one-dimensional transport features of the self-organised layer.

  17. Establishment of a Multi-color Genomic in situ Hybridization Technique to Simultaneously Discriminate the Three Interspecific Hybrid Genomes in Gossypium

    Institute of Scientific and Technical Information of China (English)

    Bing Guan; Kai Wang; Bao-Liang Zhou; Wang-Zhen Guo; Tian-Zhen Zhang

    2008-01-01

    To identify alien chromosomes in recipient progenies and to analyze genome components in polyploidy, a genomic In situ hybridization (GISH) technique that is suitable for cotton was developed using increased stringency conditions. The increased stringency conditions were a combination of the four factors in the following optimized state: 100:1 ratio of blocking DNA to probe, 60% formamide wash solution, 43 =C temperature wash and a 13 min wash. Under these specific conditions using gDNA from Gossypium sturtianurn (C1C1) as a probe, strong hybridization signals were only observed on chromosomes from the C1 genome in somatic cells of the hybrid F1 (G. hirsutum×G. sturtianum) (AtDtC1). Therefore, GISH was able to discriminate parental chromosomes in the hybrid. Further, we developed a multi-color GISH to simultaneously discriminate the three genomes of the above hybrid. The results repeatedly displayed the three genomes, At, Dt, and C1, and each set of chromosomes with a unique color, making them easy to identify. The power of the multi-color GISH was proven by analysis of the hexaploid hybrid F1 (G. hirsutum × G. australe) (AtAtDtDtG2G2). We believe that the powerful multi-color GISH technique could be applied extensively to analyze the genome component in polyploidy and to identify alien chromosomes in the recipient progenies.

  18. Hybrid planar free-electron maser in the magnetoresonance regime

    Directory of Open Access Journals (Sweden)

    Vitaliy A. Goryashko

    2009-10-01

    Full Text Available We study the operation regime of a hybrid planar free-electron maser (FEM amplifier near the magnetoresonant value of the uniform longitudinal (guide magnetic field. Using analytical expressions for individual test electron trajectories and normal frequencies of their three-dimensional oscillations in the magnetostatic field of the hybrid planar FEM, an analytical condition of chaotization of motion is established and shown to be given by the Chirikov resonance-overlap criterion applied to the normal undulator and cyclotron frequencies with respect to the coupling induced by the undulator magnetic field. It is also shown analytically that, in spite of the well-known drop for the exact magnetoresonance, the gain attains its maximal value in the zone of regular dynamics slightly above the magnetoresonant value of the guide magnetic field. Under the condition of undulator resonance, it is practically independent of the amplitude of the undulator magnetic field and the wavelength of amplified signal. To account for space-charge effects, we propose a theoretical model of a weakly relativistic FEM, which accommodates not only potential but also rotational parts of the nonradiated electromagnetic field of a moving charged particle. It turns out that the rotational part of nonradiated field diminishes the defocusing influence of the potential part on the beam bunching. Numeric simulation of the nonlinear stage of amplification is fulfilled, taking into consideration adiabatic entrance of the electron beam to the interaction region and initial electron velocity spread. We find that nonradiated field and initial electron velocity spread do not influence essentially the efficiency of hybrid planar FEM amplification if parameters of the beam-microwave interaction correspond to the operational regime in the zone of regular dynamics near the magnetoresonance.

  19. Electronic structure of hybrid interfaces for polymer-based electronics.

    Science.gov (United States)

    Fahlman, M; Crispin, A; Crispin, X; Henze, S K M; de Jong, M P; Osikowicz, W; Tengstedt, C; Salaneck, W R

    2007-05-08

    The fundamentals of the energy level alignment at anode and cathode electrodes in organic electronics are described. We focus on two different models that treat weakly interacting organic/metal (and organic/organic) interfaces: the induced density of interfacial states model and the so-called integer charge transfer model. The two models are compared and evaluated, mainly using photoelectron spectroscopy data of the energy level alignment of conjugated polymers and molecules at various organic/metal and organic/organic interfaces. We show that two different alignment regimes are generally observed: (i) vacuum level alignment, which corresponds to the lack of vacuum level offsets (Schottky-Mott limit) and hence the lack of charge transfer across the interface, and (ii) Fermi level pinning where the resulting work function of an organic/metal and organic/organic bilayer is independent of the substrate work function and an interface dipole is formed due to charge transfer across the interface. We argue that the experimental results are best described by the integer charge transfer model which predicts the vacuum level alignment when the substrate work function is above the positive charge transfer level and below the negative charge transfer level of the conjugated material. The model further predicts Fermi level pinning to the positive (negative) charge transfer level when the substrate work function is below (above) the positive (negative) charge transfer level. The nature of the integer charge transfer levels depend on the materials system: for conjugated large molecules and polymers, the integer charge transfer states are polarons or bipolarons; for small molecules' highest occupied and lowest unoccupied molecular orbitals and for crystalline systems, the relevant levels are the valence and conduction band edges. Finally, limits and further improvements to the integer charge transfer model are discussed as well as the impact on device design.

  20. Uniqueness of the Gossypium mustelinum Genome Revealed by GISH and 45S rDNA FISH

    Institute of Scientific and Technical Information of China (English)

    WU Qiong; STELLY David; SONG Guo-li; WANG Kun-bo; WANG Chun-ying; LIU Fang; LI Shao-hui; ZHANG Xiang-di; WANG Yu-hong; LIU San-hong

    2008-01-01

    @@ Gossypium mustelinum [-(AD)4"] is one of five tetraploid species in Gossypium.Three pairs of nucleolar organizer regions (NOR) in (AD)4 were detected by FISH with 45S rDNA as a probe,they also were observed with genomic DNA (gDNA) from Gossypium D genome species as probes.Of the three NORs or GISH-NORs,one was super-major and other two were minor,which was distinctly different from other tetraploid cottons.

  1. The Limits of Hospitality in Gish Jen’s The Love Wife

    OpenAIRE

    Jeanne Sokolowski

    2012-01-01

    Gish Jen’s 2004 novel The Love Wife highlights the foreign presence within American national boundaries but plays with the reader’s expectations of a novel of immigration to deconstruct the categories of citizen and immigrant, foreigner and native, protagonist and antagonist, host and guest. This blurring between antagonist and protagonist in the novel captures the dynamics of hospitality: through a delicate series of adjustments, concessions, and compromise, guest and host can exchange place...

  2. The Limits of Hospitality in Gish Jen’s The Love Wife

    OpenAIRE

    Sokolowski, Jeanne

    2012-01-01

    Gish Jen’s 2004 novel The Love Wife highlights the foreign presence within American national boundaries but plays with the reader’s expectations of a novel of immigration to deconstruct the categories of citizen and immigrant, foreigner and native, protagonist and antagonist, host and guest. This blurring between antagonist and protagonist in the novel captures the dynamics of hospitality: through a delicate series of adjustments, concessions, and compromise, guest and host can exchange place...

  3. Hybrid [5]Radialenes with Bispyrroloheteroles: New Electron-Donating Units.

    Science.gov (United States)

    Higashino, Tomohiro; Imahori, Hiroshi

    2015-09-14

    Bispyrroloheteroles have been synthesized to address their intrinsic structural, optical, and electrochemical properties. The X-ray crystal structures and calculated natural bond orbital (NBO) bond orders unambiguously demonstrated the existence of a two pyrrole-fused five-membered ring with short exocyclic C-C double bonds and long endocyclic C-C single bonds, supporting that the bispyrroloheteroles are rare examples of structurally characterized hybrid [5]radialenes. The bispyrroloheteroles were found to act as an electron-donating unit, which would be fascinating for the rational design of new charge-transporting and donor-acceptor photovoltaic materials as well as versatile charge-transfer complexes.

  4. Transmission electron microscopy of unstained hybrid Au nanoparticles capped with PPAA (plasma-poly-allylamine)

    DEFF Research Database (Denmark)

    Gontard, Lionel C.; Fernández, Asunción; Dunin-Borkowski, Rafal E.;

    2014-01-01

    Hybrid (organic shell-inorganic core) nanoparticles have important applications in nanomedicine. Although the inorganic components of hybrid nanoparticles can be characterized readily using conventional transmission electron microscopy (TEM) techniques, the structural and chemical arrangement of ...

  5. Application of Genomic In Situ Hybridization in Horticultural Science

    Directory of Open Access Journals (Sweden)

    Fahad Ramzan

    2017-01-01

    Full Text Available Molecular cytogenetic techniques, such as in situ hybridization methods, are admirable tools to analyze the genomic structure and function, chromosome constituents, recombination patterns, alien gene introgression, genome evolution, aneuploidy, and polyploidy and also genome constitution visualization and chromosome discrimination from different genomes in allopolyploids of various horticultural crops. Using GISH advancement as multicolor detection is a significant approach to analyze the small and numerous chromosomes in fruit species, for example, Diospyros hybrids. This analytical technique has proved to be the most exact and effective way for hybrid status confirmation and helps remarkably to distinguish donor parental genomes in hybrids such as Clivia, Rhododendron, and Lycoris ornamental hybrids. The genome characterization facilitates in hybrid selection having potential desirable characteristics during the early hybridization breeding, as this technique expedites to detect introgressed sequence chromosomes. This review study epitomizes applications and advancements of genomic in situ hybridization (GISH techniques in horticultural plants.

  6. Structural and electronic properties of hybrid silicon-germanium nanosheets

    Directory of Open Access Journals (Sweden)

    F. L. Pérez Sánchez

    2014-12-01

    Full Text Available Using first principles molecular calculations, based on the Density Functional Theory (DFT, structural and electronic properties of hybrid graphene—like silicon—germanium circular nanosheets of hexagonal symmetry are investigated. The exchange—correlation functional of Perdew—Wang (PW in the local spin density approximation (LSDA based on the pseudopotentials of Dolg—Bergnre is applied. The finite extension nanosheets are represented by the CnHm—like cluster model with mono—hydrogenated armchair edges. Changes of the physicochemical properties were analyzed to learn on the chemical composition. We have obtained that the corrugation of the hybrid nanosheets is maintained (with respect to the pristine nanosheets of Ge and Si and is more pronounced when there is a high percentage of germanium. Moreover, hybrid nanosheets have ionic bonds (polarity in the interval from 0.18 to 0.77 D and exhibit a semimetal behavior. Three types of chemical compositions are considered: 1 the one—one relationship, 2 formation of Ge dimers and 3 formation of Ge hexagons. In each case it is observed an increase in the chemical reactivity. Finally, analyzing the work function we conclude that in cases 1 and 2 the chemical compositions improve the efficiency of the field emission and thereby they could expand the scope of nanotechnology applications.

  7. Electron imaging with Medipix2 hybrid pixel detector

    CERN Document Server

    McMullan, G; Chen, S; Henderson, R; Llopart, X; Summerfield, C; Tlustos, L; Faruqi, A R

    2007-01-01

    The electron imaging performance of Medipix2 is described. Medipix2 is a hybrid pixel detector composed of two layers. It has a sensor layer and a layer of readout electronics, in which each 55 μm×55 μm pixel has upper and lower energy discrimination and MHz rate counting. The sensor layer consists of a 300 μm slab of pixellated monolithic silicon and this is bonded to the readout chip. Experimental measurement of the detective quantum efficiency, DQE(0) at 120 keV shows that it can reach 85% independent of electron exposure, since the detector has zero noise, and the DQE(Nyquist) can reach 35% of that expected for a perfect detector (4/π2). Experimental measurement of the modulation transfer function (MTF) at Nyquist resolution for 120 keV electrons using a 60 keV lower energy threshold, yields a value that is 50% of that expected for a perfect detector (2/π). Finally, Monte Carlo simulations of electron tracks and energy deposited in adjacent pixels have been performed and used to calculate expected v...

  8. Electronic heat current rectification in hybrid superconducting devices

    Energy Technology Data Exchange (ETDEWEB)

    Fornieri, Antonio, E-mail: antonio.fornieri@sns.it; Giazotto, Francesco, E-mail: francesco.giazotto@sns.it [NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, I-56127 Pisa (Italy); Martínez-Pérez, María José [Physikalisches Institut - Experimentalphysik II Universität Tübingen, D-72076 Tübingen (Germany)

    2015-05-15

    In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a single hybrid tunnel junction, we will show how the rectification efficiency can be largely increased by combining multiple junctions in an asymmetric chain of tunnel-coupled islands. We propose three different designs, analyzing their performance and their potential advantages. Besides being relevant from a fundamental physics point of view, this kind of devices might find important technological application as fundamental building blocks in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.

  9. Electron-phonon coupling in hybrid lead halide perovskites

    Science.gov (United States)

    Wright, Adam D.; Verdi, Carla; Milot, Rebecca L.; Eperon, Giles E.; Pérez-Osorio, Miguel A.; Snaith, Henry J.; Giustino, Feliciano; Johnston, Michael B.; Herz, Laura M.

    2016-05-01

    Phonon scattering limits charge-carrier mobilities and governs emission line broadening in hybrid metal halide perovskites. Establishing how charge carriers interact with phonons in these materials is therefore essential for the development of high-efficiency perovskite photovoltaics and low-cost lasers. Here we investigate the temperature dependence of emission line broadening in the four commonly studied formamidinium and methylammonium perovskites, HC(NH2)2PbI3, HC(NH2)2PbBr3, CH3NH3PbI3 and CH3NH3PbBr3, and discover that scattering from longitudinal optical phonons via the Fröhlich interaction is the dominant source of electron-phonon coupling near room temperature, with scattering off acoustic phonons negligible. We determine energies for the interacting longitudinal optical phonon modes to be 11.5 and 15.3 meV, and Fröhlich coupling constants of ~40 and 60 meV for the lead iodide and bromide perovskites, respectively. Our findings correlate well with first-principles calculations based on many-body perturbation theory, which underlines the suitability of an electronic band-structure picture for describing charge carriers in hybrid perovskites.

  10. Electron-phonon coupling in hybrid lead halide perovskites.

    Science.gov (United States)

    Wright, Adam D; Verdi, Carla; Milot, Rebecca L; Eperon, Giles E; Pérez-Osorio, Miguel A; Snaith, Henry J; Giustino, Feliciano; Johnston, Michael B; Herz, Laura M

    2016-05-26

    Phonon scattering limits charge-carrier mobilities and governs emission line broadening in hybrid metal halide perovskites. Establishing how charge carriers interact with phonons in these materials is therefore essential for the development of high-efficiency perovskite photovoltaics and low-cost lasers. Here we investigate the temperature dependence of emission line broadening in the four commonly studied formamidinium and methylammonium perovskites, HC(NH2)2PbI3, HC(NH2)2PbBr3, CH3NH3PbI3 and CH3NH3PbBr3, and discover that scattering from longitudinal optical phonons via the Fröhlich interaction is the dominant source of electron-phonon coupling near room temperature, with scattering off acoustic phonons negligible. We determine energies for the interacting longitudinal optical phonon modes to be 11.5 and 15.3 meV, and Fröhlich coupling constants of ∼40 and 60 meV for the lead iodide and bromide perovskites, respectively. Our findings correlate well with first-principles calculations based on many-body perturbation theory, which underlines the suitability of an electronic band-structure picture for describing charge carriers in hybrid perovskites.

  11. Hybrid gate dielectric materials for unconventional electronic circuitry.

    Science.gov (United States)

    Ha, Young-Geun; Everaerts, Ken; Hersam, Mark C; Marks, Tobin J

    2014-04-15

    Recent advances in semiconductor performance made possible by organic π-electron molecules, carbon-based nanomaterials, and metal oxides have been a central scientific and technological research focus over the past decade in the quest for flexible and transparent electronic products. However, advances in semiconductor materials require corresponding advances in compatible gate dielectric materials, which must exhibit excellent electrical properties such as large capacitance, high breakdown strength, low leakage current density, and mechanical flexibility on arbitrary substrates. Historically, conventional silicon dioxide (SiO2) has dominated electronics as the preferred gate dielectric material in complementary metal oxide semiconductor (CMOS) integrated transistor circuitry. However, it does not satisfy many of the performance requirements for the aforementioned semiconductors due to its relatively low dielectric constant and intransigent processability. High-k inorganics such as hafnium dioxide (HfO2) or zirconium dioxide (ZrO2) offer some increases in performance, but scientists have great difficulty depositing these materials as smooth films at temperatures compatible with flexible plastic substrates. While various organic polymers are accessible via chemical synthesis and readily form films from solution, they typically exhibit low capacitances, and the corresponding transistors operate at unacceptably high voltages. More recently, researchers have combined the favorable properties of high-k metal oxides and π-electron organics to form processable, structurally well-defined, and robust self-assembled multilayer nanodielectrics, which enable high-performance transistors with a wide variety of unconventional semiconductors. In this Account, we review recent advances in organic-inorganic hybrid gate dielectrics, fabricated by multilayer self-assembly, and their remarkable synergy with unconventional semiconductors. We first discuss the principals and functional

  12. Molecular Cytogenetic Analysis of Spontaneous Interspecific Hybrid Between Oryza sativa and Oryza minuta

    Directory of Open Access Journals (Sweden)

    Chuan-deng YI

    2008-12-01

    Full Text Available Genomic in situ hybridization (GISH is a powerful tool to characterize parental chromosomes in interspecific hybrids, including the behaviour of autosynapsis and chromosome pairing. It was used to distinguish the chromosomes of Oryza sativa from wild species in a spontaneous interspecific hybrid and to investigate the chromosome pairing at metaphase I in meiosis of the hybrid in this study. The hybrid was a triploid with 36 chromosomes according to the chromosome number investigated in mitosis of root tips. During metaphase I of meiosis in the hybrid, less chromosome pairing was observed and most of the chromosomes existed as univalent. Based on GISH and FISH (Fluorescent in situ hybridization analyses, the chromosomes of the hybrid were composed of genomes A, B and C. Thus, it was believed that the hybrid was the result of natural hybridization between cultivated rice and wild species O. minuta which was planted in experimental fields.

  13. Universal logic gates via liquid-electronic hybrid divider

    KAUST Repository

    Zhou, Bingpu

    2012-01-01

    We demonstrated two-input microdroplet-based universal logic gates using a liquid-electronic hybrid divider. All 16 Boolean logic functions have been realized by manipulating the applied voltages. The novel platform consists of a microfluidic chip with integrated microdroplet detectors and external electronic components. The microdroplet detectors act as the communication media for fluidic and electronic information exchange. The presence or absence of microdroplets at the detector translates into the binary signal 1 or 0. The embedded micro-mechanical pneumatically actuated valve (PAV), fabricated using the well-developed multilayer soft lithography technique, offers biocompatibility, flexibility and accuracy for the on-chip realization of different logic functions. The microfluidic chip can be scaled up to construct large-scale microfluidic logic computation. On the other hand, the microfluidic chip with a specific logic function can be applied to droplet-based chemical reactions for on-demand bio or chemical analysis. Our experimental results have presented an autonomously driven, precision-controlled microfluidic chip for chemical reactions based on the IF logic function. © 2012 The Royal Society of Chemistry.

  14. Electron transport in a mesoscopic superconducting ferromagnetic hybrid conductor

    Energy Technology Data Exchange (ETDEWEB)

    Giroud, M.; Hasselbach, K.; Courtois, H.; Pannetier, B. [Centre de Recherche sur les Tres Basses Temperatures, CNRS, 38 - Grenoble (France); Mailly, D. [Laboratoire de Photonique et de Nanostructures, 91 - Marcoussis (France)

    2003-01-01

    We present electrical transport experiments performed on submicron hybrid devices made of a ferromagnetic conductor (Co) and a superconducting (Al) electrode. The sample was patterned in order to separate the contributions of the Co conductor and of the Co-Al interface. We observed a strong influence of the Al electrode superconductivity on the resistance of the Co conductor. This effect is large only when the interface is highly transparent. We characterized the dependence of the observed resistance decrease on temperature, bias current and magnetic field. As the differential resistance of the ferromagnet exhibits a non-trivial asymmetry, we claim that the magnetic domain structure plays an important role in the electron transport properties of superconducting / ferromagnetic conductors. (authors)

  15. Hybrid LC filter for power electronic drives. Theory and implementation

    Energy Technology Data Exchange (ETDEWEB)

    Dzhankhotov, V.

    2009-07-01

    Power electronic converter drives use, for the sake of high efficiency, pulse-width modulation that results in sequences of high-voltage high-frequency steep-edged pulses. Such a signal contains a set of high harmonics not required for control purposes. Harmonics cause reflections in the cable between the motor and the inverter leading to faster winding insulation ageing. Bearing failures and problems with electromagnetic compatibility may also result. Electrical du/dt filters provide an effective solution to problems caused by pulse-width modulation, thereby increasing the performance and service life of the electrical machines. It is shown that RLC filters effectively decrease the reflection phenomena in the cable. Improved (simple, but effective) solutions are found for both differential- and common-mode signals; these solutions use a galvanic connection between the RLC filter star point and the converter DC link. Foil chokes and film capacitors are among the most widely used components in high-power applications. In actual applications they can be placed in different parts of the cabinet. This fact complicates the arrangement of the cabinet and decreases the reliability of the system. In addition, the inductances of connection wires may prevent filtration at high frequencies. This thesis introduces a new hybrid LC filter that uses a natural capacitance between the turns of the foil choke based on integration of an auxiliary layer into it. The main idea of the hybrid LC filter results from the fact that both the foil choke and the film capacitors have the same roll structure. Moreover, the capacitance between the turns ('intra capacitance') of the foil inductors is the reason for the deterioration of their properties at high frequencies. It is shown that the proposed filter has a natural cancellation of the intra capacitance. A hybrid LC filter may contain two or more foil layers isolated from each other and coiled on a core. The core material can be

  16. Reduced density matrix hybrid approach: application to electronic energy transfer.

    Science.gov (United States)

    Berkelbach, Timothy C; Markland, Thomas E; Reichman, David R

    2012-02-28

    Electronic energy transfer in the condensed phase, such as that occurring in photosynthetic complexes, frequently occurs in regimes where the energy scales of the system and environment are similar. This situation provides a challenge to theoretical investigation since most approaches are accurate only when a certain energetic parameter is small compared to others in the problem. Here we show that in these difficult regimes, the Ehrenfest approach provides a good starting point for a dynamical description of the energy transfer process due to its ability to accurately treat coupling to slow environmental modes. To further improve on the accuracy of the Ehrenfest approach, we use our reduced density matrix hybrid framework to treat the faster environmental modes quantum mechanically, at the level of a perturbative master equation. This combined approach is shown to provide an efficient and quantitative description of electronic energy transfer in a model dimer and the Fenna-Matthews-Olson complex and is used to investigate the effect of environmental preparation on the resulting dynamics.

  17. Molecular Cytogenetic Analysis of Spontaneous Interspecific Hybrid Between Oryza sativa and Oryza minuta

    Institute of Scientific and Technical Information of China (English)

    YI Chuan-deng; CHENG Xu; WANG Bei-bei; LIANG Guo-hua; GONG Zhi-yun; TANG Shu-zhu; GU Ming-hong

    2008-01-01

    Genomic in situ hybridization (GISH) is a powerful tool to characterize parental chromosomes in interspecific hybrids, including the behaviour of autosynapsis and chromosome paidng. It was used to distinguish the chromosomes of Oryza sativa from wild species in a spontaneous interspecific hybdd and to investigate the chromosome pairing at metaphase I in meiosis of the hybdd in this study. The hybrid was a triploid with 36 chromosomes according to the chromosome nurnber investigated in mitosis of root tips. During metaphase I of meiosis in the hybrid, less chromosome pairing was observed and most of the chromosomes existed as univalent. Based on GISH and FISH (Fluorescent in situ hybridization) analyses, the chromosomes of the hybrid were composed of genomes A, B and C. Thus, it was believed that the hybrid was the result of natural hybridization between cultivated rice and wild species O. minuta which was planted in experimental fields.

  18. Lower hybrid current drive favoured by electron cyclotron radiofrequency heating

    Energy Technology Data Exchange (ETDEWEB)

    Cesario, R.; Cardinali, A.; Castaldo, C.; Marinucci, M.; Tuccillo, A. A. [Associazione EURATOM/ENEA sulla Fusione, Centro Ricerche Frascati, 00044, Frascati (Italy); Amicucci, L.; Galli, A. [Università di Roma Sapienza, Dipartimento Ingegneria Elettronica, Rome (Italy); Giruzzi, G. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Napoli, F.; Schettini, G. [Università di Roma Tre, Dipartimento Ingegneria Elettronica, Rome (Italy)

    2014-02-12

    The important goal of adding to the bootstrap a fraction of non-inductive plasma current, which would be controlled for obtaining and optimizing steady-state profiles, can be reached by using the Current Drive produced by Lower Hybrid waves (LHCD). FTU (Frascati Tokamak Upgrade) experiments demonstrated, indeed, that LHCD is effective at reactor-graded high plasma density, and the LH spectral broadening is reduced, operating with higher electron temperature in the outer region of plasma column (T{sub e-periphery}). This method was obtained following the guidelines of theoretical predictions indicating that the broadening of launched spectrum produced by parametric instability (PI) should be reduced, and the LHCD effect at high density consequently enabled, under higher (T{sub e-periphery}). In FTU, the temperature increase in the outer plasma region was obtained by operating with reduced particle recycling, lithized walls and deep gas fuelling by means of fast pellet. Heating plasma periphery with electron cyclotron resonant waves (ECRH) will provide a further tool for achieving steady-state operations. New FTU experimental results are presented here, demonstrating that temperature effect at the plasma periphery, affecting LH penetration, occurs in a range of plasma parameters broader than in previous work. New information is also shown on the modelling assessing frequencies and growth rates of the PI coupled modes responsible of spectral broadening. Finally, we present the design of an experiment scheduled on FTU next campaign, where ECRH power is used to slightly increase the electron temperature in the outer plasma region of a high-density discharge aiming at restoring LHCD. Consequent to model results, by operating with a toroidal magnetic field of 6.3 T, useful for locating the electron cyclotron resonant layer at the periphery of the plasma column (r/a∼0.8, f{sub 0}=144 GHz), an increase of T{sub e} in the outer plasma (from 40 eV to 80 eV at r/a∼0.8) is

  19. The electronics hybrid of the ATLAS-SCT endcap detector modules

    CERN Document Server

    Ketterer, C

    2004-01-01

    An electronics hybrid has been developed for the ATLAS silicon microstrip tracker endcaps. The high-density interconnect board carries 12 readout ASICs, as well as ASICs for the optical data transmission. Special requirements are that this hybrid has to be double sided, radiation hard, and low mass. A six-layer flexible circuit in copper-polyimide technology has been chosen for this purpose. It is folded around a highly heat conducting carbon-carbon composite substrate to form the rigid double-sided hybrid. Adequate thermal, mechanical, and electrical performance of the hybrid has been demonstrated. The production of the hybrids started in May 2003. (12 refs).

  20. Hybrid additive manufacturing of 3D electronic systems

    Science.gov (United States)

    Li, J.; Wasley, T.; Nguyen, T. T.; Ta, V. D.; Shephard, J. D.; Stringer, J.; Smith, P.; Esenturk, E.; Connaughton, C.; Kay, R.

    2016-10-01

    A novel hybrid additive manufacturing (AM) technology combining digital light projection (DLP) stereolithography (SL) with 3D micro-dispensing alongside conventional surface mount packaging is presented in this work. This technology overcomes the inherent limitations of individual AM processes and integrates seamlessly with conventional packaging processes to enable the deposition of multiple materials. This facilitates the creation of bespoke end-use products with complex 3D geometry and multi-layer embedded electronic systems. Through a combination of four-point probe measurement and non-contact focus variation microscopy, it was identified that there was no obvious adverse effect of DLP SL embedding process on the electrical conductivity of printed conductors. The resistivity maintained to be less than 4  ×  10-4 Ω · cm before and after DLP SL embedding when cured at 100 °C for 1 h. The mechanical strength of SL specimens with thick polymerized layers was also identified through tensile testing. It was found that the polymerization thickness should be minimised (less than 2 mm) to maximise the bonding strength. As a demonstrator a polymer pyramid with embedded triple-layer 555 LED blinking circuitry was successfully fabricated to prove the technical viability.

  1. One- and many-electron self-interaction error in local and global hybrid functionals

    Science.gov (United States)

    Schmidt, Tobias; Kümmel, Stephan

    2016-04-01

    Electronic self-interaction poses a fundamental challenge in density-functional theory. It greatly limits, e.g., the physical interpretation of eigenvalues as electron removal energies. We here investigate whether local hybrid functionals that are designed to be free from one-electron self-interaction lead to occupied Kohn-Sham eigenvalues and orbitals that approximate photoemission observables well. We compare the local hybrid results to the ones from global hybrid functionals that only partially counteract the self-interaction, and to the results that are obtained with a Perdew-Zunger-type self-interaction correction. Furthermore, we check whether being nominally free from one-electron self-interaction translates into a reduced many-electron self-interaction error. Our findings show that this is not the case for the local hybrid functionals that we studied: In practice they are similar to global hybrids in many respects, despite being formally superior. This finding indicates that there is a conceptual difference between the Perdew-Zunger way and the local hybrid way of translating the one-electron condition to a many-electron system. We also point out and solve some difficulties that occur when using local hybrid functionals in combination with pseudopotentials.

  2. Hybrid fluorescence and electron cryo-microscopy for simultaneous electron and photon imaging.

    Science.gov (United States)

    Iijima, Hirofumi; Fukuda, Yoshiyuki; Arai, Yoshihiro; Terakawa, Susumu; Yamamoto, Naoki; Nagayama, Kuniaki

    2014-01-01

    Integration of fluorescence light and transmission electron microscopy into the same device would represent an important advance in correlative microscopy, which traditionally involves two separate microscopes for imaging. To achieve such integration, the primary technical challenge that must be solved regards how to arrange two objective lenses used for light and electron microscopy in such a manner that they can properly focus on a single specimen. To address this issue, both lateral displacement of the specimen between two lenses and specimen rotation have been proposed. Such movement of the specimen allows sequential collection of two kinds of microscopic images of a single target, but prevents simultaneous imaging. This shortcoming has been made up by using a simple optical device, a reflection mirror. Here, we present an approach toward the versatile integration of fluorescence and electron microscopy for simultaneous imaging. The potential of simultaneous hybrid microscopy was demonstrated by fluorescence and electron sequential imaging of a fluorescent protein expressed in cells and cathodoluminescence imaging of fluorescent beads. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. Fast electron dynamics in lower hybrid current drive experiment on HT-7 tokamak

    Institute of Scientific and Technical Information of China (English)

    Shi Yue-Jiang; Kuang Gang-Li; Li Jian-Gang; HT-7 Team; Wan Bao-Nian; Chen Zhong-Yong; Hu Li-Qun; Lin Shi-Yao; Ruan Huai-Lin; Qian Jin-Ping; Zhen Xiang-Jun; Ding Bo-Jiang

    2005-01-01

    The dynamic behaviour of fast electron in lower hybrid current drive (LHCD) experiments is a crucial issue in the sense of enhancing plasma performance. A new hard x-ray diagnostic system on HT-7 allows the investigation of the lower hybrid wave dynamics. The behaviour of fast electron is studied in several kinds of LHCD experiments, including long pulse discharges, high performance discharges and counter-LHCD experiments.

  4. Genomic in situ hybridization analysis of Thinopyrum chromatin in a wheat-Th. intermedium partial amphiploid and six derived chromosome addition lines

    Science.gov (United States)

    Chen; Conner; Laroche; Ji; Armstrong; Fedak

    1999-12-01

    The genomic origin of alien chromosomes present in a wheat-Thinopyrum intermedium partial amphiploid TAF46 (2n = 8x = 56) and six derived chromosome addition lines were analyzed by genomic in situ hybridization (GISH) using S genomic DNA from Pseudoroegneria strigosa (2n = 2x = 14, SS) as a probe. The GISH analysis clearly showed that the chromosome complement of the partial amphiploid TAF46 consists of an entire wheat genome plus one synthetic genome consisting of a mixture of six S genome chromosomes and eight J (=E) genome chromosomes derived from Th. intermedium (2n = 6x = 42, JJJ(s)J(s)SS). There were no Js genome chromosomes present in TAF46. The J genome chromosomes present in TAF46 displayed a unique GISH hybridization pattern with the S genomic DNA probe, in which S genome DNA strongly hybridized at the terminal regions and weakly hybridized over the remaining parts of the chromosomes. This provides a diagnostic marker for distinguishing J genome chromosomes from Js or S genome or wheat ABD genome chromosomes. The genomic origin of the alien chromosomes present in the six derived chromosome addition lines were identified by their characteristic GISH hybridization patterns with S genomic DNA probe. GISH analysis showed that addition lines L1, L2, L3, and L5 carried one pair of J genome chromosomes, while addition lines L4 and L7 each carried one pair of S genome chromosomes. GISH patterns detected by the S genome probe on addition line of L1 were identical to those of the J genome chromosomes present in the partial amphiploid TAF46, suggesting that these chromosomes were not structurally altered when they were transferred from TAF46 to addition lines.

  5. Simulating Strongly Correlated Electron Systems with Hybrid Monte Carlo

    Institute of Scientific and Technical Information of China (English)

    LIU Chuan

    2000-01-01

    Using the path integral representation, the Hubbard and the periodic Anderson model on D-dimensional cubic lattice are transformed into field theories of fermions in D + 1 dimensions. These theories at half-filling possess a positive definite real symmetry fermion matrix and can be simulated using the hybrid Monte Carlo method.

  6. Slow electron energy balance for hybrid models of direct-current glow discharges

    Science.gov (United States)

    Eliseev, S. I.; Bogdanov, E. A.; Kudryavtsev, A. A.

    2017-09-01

    In this paper, we present the formulation of slow electron energy balance for hybrid models of direct current (DC) glow discharge. Electrons originating from non-local ionization (secondary) contribute significantly to the energy balance of slow electrons. An approach towards calculating effective energy brought by a secondary electron to the group of slow electrons by means of Coulomb collisions is suggested. The value of effective energy shows a considerable dependence on external parameters of a discharge, such as gas pressure, type, and geometric parameters. The slow electron energy balance was implemented into a simple hybrid model that uses analytical formulation for the description of non-local ionization by fast electrons. Simulations of short (without positive column) DC glow discharge in argon are carried out for a range of gas pressures. Comparison with experimental data showed generally good agreement in terms of current-voltage characteristics, electron density, and electron temperature. Simulations also capture the trend of increasing electron density with decreasing pressure observed in the experiment. Analysis shows that for considered conditions, the product of maximum electron density ne and electron temperature Te in negative glow is independent of gas pressure and depends on the gas type, cathode material, and discharge current. Decreasing gas pressure reduces the heating rate of slow electrons during Coulomb collisions with secondary electrons, which leads to lower values of Te and, in turn, higher maximum ne.

  7. Tunable hybridization of electronic states of graphene and a metal surface

    OpenAIRE

    Gruneis, Alexander; Vyalikh, Denis

    2008-01-01

    We present an approach to monitor and control the strength of the hybridization between electronic states of graphene and metal surfaces. Inspecting the distribution of the $\\pi$ band in a high-quality graphene layer synthesized on Ni(111) by angle-resolved photoemission, we observe a new "kink" feature which indicates a strong hybridization between $\\pi$ and \\textit{d} states of graphene and nickel, respectively. Upon deposition and gradual intercalation of potassium atoms into the graphene/...

  8. Polymer-metal hybrid transparent electrodes for flexible electronics

    National Research Council Canada - National Science Library

    Kang, Hongkyu; Jung, Suhyun; Jeong, Soyeong; Kim, Geunjin; Lee, Kwanghee

    2015-01-01

    Despite nearly two decades of research, the absence of ideal flexible and transparent electrodes has been the largest obstacle in realizing flexible and printable electronics for future technologies...

  9. Preparation and property of a novel soluble electron transport POSS-based hybrid material

    Institute of Scientific and Technical Information of China (English)

    Xin Wang; Juan Shen; Jin Cui Wu; Min Fang; Hong Yao Xu

    2008-01-01

    A novel POSS-based organic/inorganic hybrid covalently attached at molecular level, 2-(4-(allyloxy)phenyl)-5-(4-(octyloxy)phenyl)-1,3,4-oxadiazole-POSS (6) (abbreviated as oxadiazole-POSS) was synthesized by Pt (dcp) catalyst. The hybrid was soluble in common organic solvents such as CHCl3, toluene, C2H4Cl2, and THF. Its structures and properties were characterized and evaluated with FTIR, 1H NMR, 13C NMR, 29Si NMR, EA, TGA, DSC, GPC, and CV, respectively. The results show that the novel hybrid possesses high thermal stability and good electron injection ability.

  10. Interaction of runaway electrons with lower hybrid waves via anomalous Doppler broadening

    Science.gov (United States)

    Martín-Solís, J. R.; Sánchez, R.; Esposito, B.

    2002-05-01

    Due to the relativistic decrease of the electron cyclotron frequency, a cyclotron resonance may appear between runaway electrons and lower hybrid waves. A single particle description of the runaway dynamics [J. R. Martín-Solís et al., Phys. Plasmas 5, 2370 (1998)] is extended to analyze the effect of the interaction of runaway electrons with lower hybrid waves via anomalous Doppler broadening. The conditions under which the resonant interaction can play a role in limiting the runaway energy are established and it is shown that, under typical lower hybrid current drive operation parameters, an efficient wave-particle coupling may occur. Observations of a fast pitch angle scattering event during the current decay phase of Ohmic discharges in the Toroidal Experiment for Technically Oriented Research (TEXTOR) [R. J. E. Jaspers, Ph.D. thesis, Technical University Eindhoven (1995)] are interpreted in terms of such interaction.

  11. The Limits of Hospitality in Gish Jen’s The Love Wife

    Directory of Open Access Journals (Sweden)

    Jeanne Sokolowski

    2012-06-01

    Full Text Available Gish Jen’s 2004 novel The Love Wife highlights the foreign presence within American national boundaries but plays with the reader’s expectations of a novel of immigration to deconstruct the categories of citizen and immigrant, foreigner and native, protagonist and antagonist, host and guest. This blurring between antagonist and protagonist in the novel captures the dynamics of hospitality: through a delicate series of adjustments, concessions, and compromise, guest and host can exchange places with one another. Tapping into fears particularly emergent in the post-9/11 era of immigrants as poised to infiltrate America, Jen’s novel engages with the anxiety evoked by the foreigner’s presence but complicates this notion through her careful examination of the ethnic- and gender-inflected dimensions of that response, as well as through the resolution of the plot. Considering the trope of hospitality within contemporary Asian American works also helps illuminate fiction’s role in evolving definitions of “Asian American” and “America” in the “post-national” era.

  12. Investigation of the hybrid electron linac with negative group velocity

    Science.gov (United States)

    Savin, E. A.; Alekhanov, R. Yu.; Bulanov, A. V.; Kaminskiy, V. I.; Matsievskiy, S. V.; Sobenin, N. P.

    2016-09-01

    Hybrid accelerator, incorporating travelling wave (TW) and standing wave (SW) structures is proposed and discussed. Accelerator can sum up an RF focusing in the SW buncher and lower losses in the TW accelerating structure walls. Moreover, the structure without dumping load is proposed. Input power and beam loading are chosen to minimize power reflection from buncher maintain travelling wave regime in the accelerating structure while beam loading is on. In this case SW buncher operates as a dumping load, so all input power either goes to beam or dissipates in the wall losses, it increases structure efficiency. RF characteristics and beam dynamics simulations have been performed.

  13. Paired-pulse facilitation achieved in protonic/electronic hybrid indium gallium zinc oxide synaptic transistors

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Li Qiang, E-mail: guoliqiang@ujs.edu.cn; Ding, Jian Ning; Huang, Yu Kai [Micro/Nano Science & Technology Center, Jiangsu University, Zhenjiang, 212013 (China); Zhu, Li Qiang, E-mail: lqzhu@nimte.ac.cn [Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

    2015-08-15

    Neuromorphic devices with paired pulse facilitation emulating that of biological synapses are the key to develop artificial neural networks. Here, phosphorus-doped nanogranular SiO{sub 2} electrolyte is used as gate dielectric for protonic/electronic hybrid indium gallium zinc oxide (IGZO) synaptic transistor. In such synaptic transistors, protons within the SiO{sub 2} electrolyte are deemed as neurotransmitters of biological synapses. Paired-pulse facilitation (PPF) behaviors for the analogous information were mimicked. The temperature dependent PPF behaviors were also investigated systematically. The results indicate that the protonic/electronic hybrid IGZO synaptic transistors would be promising candidates for inorganic synapses in artificial neural network applications.

  14. Rechargeable Mg battery cathode TiS3 with d-p orbital hybridized electronic structures

    Science.gov (United States)

    Taniguchi, Kouji; Gu, Yunpeng; Katsura, Yukari; Yoshino, Takafumi; Takagi, Hidenori

    2016-01-01

    Rechargeable performance is realized in Mg batteries using a TiS3 cathode without the nanometer-scale downsizing of electrode particles. The specific capacity is about 80 mAh/g for the first 50 cycles at room temperature. This observed specific capacity is comparable to that of the prototype cathode for Mg batteries. First-principles calculation indicates that TiS3 is a semiconductor with d-p orbital hybridized electronic structures around the Fermi level. The reversible electrode performance is likely assisted by the delocalized electronic distribution over metal-ligand units through d-p orbital hybridization.

  15. 3D electronics for hybrid pixel detectors – TWEPP-09

    CERN Document Server

    Godiot, S; Chantepie, B; Clémens, J C; Fei, R; Fleury, J; Fougeron, D; Garcia-Sciveres, M; Hemperek, T; Karagounis, M; Krueger, H; Mekkaoui, A; Pangaud, P; Rozanov, A; Wermes, N

    2009-01-01

    Future hybrid pixel detectors are asking for smaller pixels in order to improve spatial resolution and to deal with an increasing counting rate. Facing these requirements is foreseen to be done by microelectronics technology shrinking. However, this straightforward approach presents some disadvantages in term of performances and cost. New 3D technologies offer an alternative way with the advantage of technology mixing. For the upgrade of ATLAS pixel detector, a 3D conception of the read-out chip appeared as an interesting solution. Splitting the pixel functionalities into two separate levels will reduce pixel size and open the opportunity to take benefit of technology's mixing. Based on a previous prototype of the read-out chip FE-I4 (IBM 130nm), this paper presents the design of a hybrid pixel read-out chip using threedimensional Tezzaron-Chartered technology. In order to disentangle effects due to Chartered 130nm technology from effects involved by 3D architecture, a first translation of FEI4 prototype had ...

  16. Nanoscale Structure of Self-Assembling Hybrid Materials of Inorganic and Electronically Active Organic Phases

    Energy Technology Data Exchange (ETDEWEB)

    Sofos, M.; Goswami, D.A. Stone D.K.; Okasinski, J.S.; Jin, H.; Bedzyk, M.J.; Stupp, S.I. (NWU)

    2008-10-06

    Hybrid materials with nanoscale structure that incorporates inorganic and organic phases with electronic properties offer potential in an extensive functional space that includes photovoltaics, light emission, and sensing. This work describes the nanoscale structure of model hybrid materials with phases of silica and electronically active bola-amphiphile assemblies containing either oligo(p-phenylene vinylene) or oligo(thiophene) segments. The hybrid materials studied here were synthesized by evaporation-induced self-assembly and characterized by X-ray scattering techniques. Grazing-incidence X-ray scattering studies of these materials revealed the formation of two-dimensional hexagonally packed cylindrical micelles of the organic molecules with diameters between 3.1 and 3.6 nm and cylindrical axes parallel to the surface. During the self-assembly process at low pH, the cylindrical aggregates of conjugated molecules become surrounded by silica giving rise to a hybrid structure with long-range order. Specular X-ray reflectivity confirmed the long-range periodicity of the hybrid films within a specific range of molar ratios of tetraethyl orthosilicate to cationic amphiphile. We did not observe any long-range ordering in fully organic analogues unless quaternary ammonium groups were replaced by tertiary amines. These observations suggest that charge screening in these biscationic conjugated molecules by the mineral phase is a key factor in the evolution of long range order in the self-assembling hybrids.

  17. The electronic transport characteristics of hybridized hexagon beryllium sulfide and graphene nanoribbons

    Science.gov (United States)

    Wang, Lihua; Ding, Bingjun; Guo, Yong

    2017-01-01

    Hybridized Z-BexSyCz (x + y + z = 16) systems connected by zigzag beryllium-sulfide (BeS) and graphene nanoribbons are theoretically designed, and their electronic transport characteristics are explored by first-principles approach. For the hybridized systems with unequal number of x and y, i.e. z is an odd number, an exceptional negative differential resistance (NDR) property occurs. However, for the hybridized systems including an even number of zigzag carbon chains, namely x equal to y, an interesting current-limited behavior happens. Meanwhile, the NDR phenomenon disappears. The spin transport properties of these hybridized Z-BexSyCz systems with parallel magnetism configuration also reveal the above odd-even dependence conductance behavior.

  18. Using k-alpha emission to determine fast electron spectra using the Hybrid code ZEPHYROS

    CERN Document Server

    White, Thomas; Gregori, Gianluca

    2014-01-01

    A high intensity laser-solid interaction invariably drives a non-thermal fast electron current through the target, however characterizing these fast electron distributions can prove difficult. An understanding of how these electrons propagate through dense materials is of fundamental interest and has applications relevant to fast ignition schemes and ion acceleration. Here, we utilize an upgraded version of the Hybrid code ZEPHYROS to demonstrate how the resulting k-alpha emission from such an interaction can be used as a diagnostic to obtain the characteristic temperature, divergence and total energy of the fast electron population.

  19. My ENG 102 Class Has Gone to HEC: Creating the Hybrid Electronic Course.

    Science.gov (United States)

    Ross, Jeffrey

    In this paper, a college English professor shares his teaching experiences in a Hybrid Electronic Course (HEC), which combined traditional classroom meetings with e-mail-based workshops. The paper includes a general description of the course, the instructor's daily journals throughout the course, and his reflections following the course. Many of…

  20. Oxide nanomembrane hybrids with enhanced mechano- and thermo-sensitivity for semitransparent epidermal electronics.

    Science.gov (United States)

    Park, Minjoon; Do, Kyungsik; Kim, Jaemin; Son, Donghee; Koo, Ja Hoon; Park, Jinkyung; Song, Jun-Kyul; Kim, Ji Hoon; Lee, Minbaek; Hyeon, Taeghwan; Kim, Dae-Hyeong

    2015-05-01

    Oxide nanomembrane hybrids with enhanced mechano- and thermo-sensitivity for semitransparent epidermal electronics are developed. The use of nanomaterials (single wall nanotubes and silver nanoparticles) embedded in the oxide nanomembranes significantly enhances mechanical and thermal sensitivities. These mechanical and thermal sensors are utilized in wheelchair control and hypothermia detection, which are useful for patients with strokes.

  1. [Chromosomal structure of the hybrids between Allium cepa L. and Allium fistulosum L. with relative resistance to downy mildew based on in situ hybridization].

    Science.gov (United States)

    Budylin, M V; Kan, L Iu; Romanov, V S; Khrustaleva, L I

    2014-04-01

    Genomic in situ hybridization (GISH) was used for a chromosomal composition study of the later generations of interspecific hybrids between A. cepa L. and A. fistulosum L., which are relatively resistant to downy mildew (peronosporosis). GISH revealed that F2 hybrids, which did not produce seeds, were triploids (2n = 3x = 24) with 24 chromosomes and possessed in their compliments 16 chromosomes of A. fistulosum L. and eight chromosomes of A. cepa L. or eight chromosomes of A. fistulosum L. and 16 chromosomes of A. cepa L. The advanced F5 hybrid, which produced few seeds, was amphidiploid with 32 chromosomes. BC1F5 hybrid was triploid with eight chromosomes of A. fistulosum L. and 16 chromosomes of A. cepa L., which did not produce seeds. BC2 (BC1F5) plant was amphidiploid that possessed 4 recombinant chromosomes and produced few seeds. GISH results point to 2n-gametes formation in macro- and microsporogenesis of the hybrids. The mechanism of 2n-gametes formation and the possibility of apomixes events in the backcrossing progeny are discussed.

  2. Bosch automotive electrics and automotive electronics systems and components, networking and hybrid drive

    CERN Document Server

    2014-01-01

    The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the "Automotive Electric, Automotive Electronics" technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle. Content Electrical and electronical systems – Basic principles of networking - Examples of networked vehicles – Bus systems – Architecture of electronic systems – Mechatronics – Elektronics – Electronic control Units – Software – Sensors – Actuators – Hybrid drives – Vehicle electrical system – Start...

  3. New materials strategies for creating hybrid electronic circuitry (Presentation Video)

    Science.gov (United States)

    Marks, Tobin J.

    2013-09-01

    This lecture focuses on the challenging design and realization of new materials for creating unconventional electronic circuitry. Fabrication methodologies to achieve these goals include high-throughput, large-area printing techniques. Materials design topics to be discussed include: 1. Rationally designed high-mobility p- and n-type organic semiconductors for printed organic CMOS, 2. Polycrystalline and amorphous oxide semiconductors for transparent and mechanically flexible electronics, 3) Self-assembled and printable high-k nanodielectrics enabling ultra-large capacitance, low leakage, high breakdown fields, minimal trapped interfacial charge, and device radiation hardness. 4) Combining these materials sets to fabricate a variety of high-performance thin-film transistor-based devices.

  4. Electronic Structure Rearrangements in Hybrid Ribozyme/Protein Catalysis

    Science.gov (United States)

    Kang, Jiyoung; Kino, Hiori; Field, Martin J.; Tateno, Masaru

    2017-04-01

    We analyzed the electronic structural changes that occur in the reaction cycle of a biological catalyst composed of RNA and protein, and elucidated the dynamical rearrangements of the electronic structure that was obtained from our previous study in which ab initio quantum mechanics/molecular mechanics molecular dynamics simulations were performed. Notable results that we obtained include the generation of a reactive HOMO that is responsible for bond formation in the initial stages of the reaction, and the appearance of a reactive LUMO that is involved in the bond rupture that leads to products. We denote these changes as dynamical induction of the reactive HOMO (DIRH) and LUMO (DIRL), respectively. Interestingly, we also find that the induction of the reactive HOMO is enhanced by the formation of a low-barrier hydrogen bond (LBHB), which, to the best of our knowledge, represents a novel role for LBHBs in enzymatic systems.

  5. Hybrid optical and electronic laser locking using spectral hole burning

    CERN Document Server

    Farr, Warrick G; Ledingham, Patrick M; Korystov, Dmitry; Longdell, Jevon J

    2010-01-01

    We report on a narrow linewidth laser diode system that is stabilized using both optical and electronic feedback to a spectral hole in cryogenic Tm:YAG. The laser system exhibits very low phase noise. The spectrum of the beat signal between two lasers, over millisecond timescales, is either Fourier limited or limited by the -111dBc/Hz noise floor. The resulting laser is well suited to quantum optics and sensing applications involving rare earth ion dopants.

  6. Transmission electron microscopy of unstained hybrid Au nanoparticles capped with PPAA (plasma-poly-allylamine): structure and electron irradiation effects.

    Science.gov (United States)

    Gontard, Lionel C; Fernández, Asunción; Dunin-Borkowski, Rafal E; Kasama, Takeshi; Lozano-Pérez, Sergio; Lucas, Stéphane

    2014-12-01

    Hybrid (organic shell-inorganic core) nanoparticles have important applications in nanomedicine. Although the inorganic components of hybrid nanoparticles can be characterized readily using conventional transmission electron microscopy (TEM) techniques, the structural and chemical arrangement of the organic molecular components remains largely unknown. Here, we apply TEM to the physico-chemical characterization of Au nanoparticles that are coated with plasma-polymerized-allylamine, an organic compound with the formula C3H5NH2. We discuss the use of energy-filtered TEM in the low-energy-loss range as a contrast enhancement mechanism for imaging the organic shells of such particles. We also study electron-beam-induced crystallization and amorphization of the shells and the formation of graphitic-like layers that contain both C and N. The resistance of the samples to irradiation by high-energy electrons, which is relevant for optical tuning and for understanding the degree to which such hybrid nanostructures are stable in the presence of biomedical radiation, is also discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Hybridized electromagnetic-triboelectric nanogenerator for scavenging biomechanical energy for sustainably powering wearable electronics.

    Science.gov (United States)

    Zhang, Kewei; Wang, Xue; Yang, Ya; Wang, Zhong Lin

    2015-01-01

    We report a hybridized electromagnetic-triboelectric nanogenerator for highly efficient scavenging of biomechanical energy to sustainably power wearable electronics by human walking. Based on the effective conjunction of triboelectrification and electromagnetic induction, the hybridized nanogenerator, with dimensions of 5 cm × 5 cm × 2.5 cm and a light weight of 60 g, integrates a triboelectric nanogenerator (TENG) that can deliver a peak output power of 4.9 mW under a loading resistance of 6 MΩ and an electromagnetic generator (EMG) that can deliver a peak output power of 3.5 mW under a loading resistance of 2 kΩ. The hybridized nanogenerator exhibits a good stability for the output performance and a much better charging performance than that of an individual energy-harvesting unit (TENG or EMG). Furthermore, the hybridized nanogenerator integrated in a commercial shoe has been utilized to harvest biomechanical energy induced by human walking to directly light up tens of light-emitting diodes in the shoe and sustainably power a smart pedometer for reading the data of a walking step, distance, and energy consumption. A wireless pedometer driven by the hybrid nanogenerator can work well to send the walking data to an iPhone under the distance of 25 m. This work pushes forward a significant step toward energy harvesting from human walking and its potential applications in sustainably powering wearable electronics.

  8. First-Principles Study of Electronic Structure of Type I Hybrid Carbon-Silicon Clathrates

    Science.gov (United States)

    Chan, Kwai S.; Peng, Xihong

    2016-08-01

    A new class of type I hybrid carbon-silicon clathrates has been designed using computational methods by substituting some of the Si atoms in the silicon clathrate framework with carbon atoms. In this work, the electronic structure of hybrid carbon-silicon clathrates with and without alkaline or alkaline-earth metal guest atoms has been computed within the density functional theory framework. The theoretical calculations indicate that a small number of carbon substitutions in the Si46 framework slightly reduces the density of states (DOS) near the band edge and narrows the bandgap of carbon-silicon clathrates. Weak hybridization of the conduction band occurs when alkaline metal (Li, Na, K) atoms are inserted into the structure, while strong hybridization of the conduction band occurs when alkaline-earth metal (Mg, Ca, Ba) atoms are inserted into the hybrid structure. Empty C y Si46- y clathrates within the composition range of 2 ≤ y ≤ 15 can be tuned to exhibit indirect bandgaps of 1.5 eV or less, and may be considered as potential electronic materials.

  9. Mode conversion and electron heating near the upper hybrid resonance frequency

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.L.; Okuda, H.; Abe, H.

    1983-11-01

    Mode conversion near the upper hybrid resonance frequency and electron heating are studied using a one-dimensional electromagnetic relativistic particle code. It is found that for a sufficiently small pump field E/sub 0/, E/sub 0//sup 2//4..pi..nT/sub e/ less than or equal to 0.01, electron heating is localized in a region near the electron cyclotron layer where the pump frequency is equal to the local electron gyrofrequency. For stronger pump fields, electron heating takes place more or less uniformly across a region between the upper hybrid resonance layer and the cyclotron layer. In addition, a significant fraction of electromagnetic energy associated with the pump is found to be reflected back into the vacuum from a region in the plasma near the upper hybrid resonance layer for both strong (E/sub 0//sup 2//4..pi..nT/sub e/ approx. = 1) and weak pumps (E/sub 0//sup 2//4..pi..nT/sub e/ << 1).

  10. Power electronics and electric machinery challenges and opportunities in electric and hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Adams, D.J.; Hsu, J.S.; Young, R.W. [Oak Ridge National Lab., TN (United States); Peng, F.Z. [Univ. of Tennessee, Knoxville, TN (United States)

    1997-06-01

    The development of power electronics and electric machinery presents significant challenges to the advancement of electric and hybrid vehicles. Electronic components and systems development for vehicle applications have progressed from the replacement of mechanical systems to the availability of features that can only be realized through interacting electronic controls and devices. Near-term applications of power electronics in vehicles will enable integrated powertrain controls, integrated chassis system controls, and navigation and communications systems. Future applications of optimized electric machinery will enable highly efficient and lightweight systems. This paper will explore the areas where research and development is required to ensure the continued development of power electronics and electric machines to meet the rigorous demands of automotive applications. Additionally, recent advances in automotive related power electronics and electric machinery at Oak Ridge National Laboratory will be explained. 3 refs., 5 figs.

  11. A review and design of power electronics converters for fuel cell hybrid system applications

    DEFF Research Database (Denmark)

    Zhang, Zhe; Pittini, Riccardo; Andersen, Michael A. E.

    2012-01-01

    This paper presents an overview of most promising power electronics topologies for a fuel cell hybrid power conversion system which can be utilized in many applications such as hybrid electrical vehicles (HEV), distributed generations (DG) and uninterruptible-power-supply (UPS) systems. Then......, a multiple-input power conversion system including a decoupled dual-input converter and a three-phase neutral-point-clamped (NPC) inverter is proposed. The system can operate in both stand-alone and grid-connected modes. Simulation and experimental results are provided to show the feasibility of the proposed...

  12. Efficient Hybrid Optimal Design Method for Power Electronics Converters

    CERN Document Server

    AUTHOR|(SzGeCERN)697719; Aguglia, Davide; Viarouge, Philippe; Cros, Jérôme

    2015-01-01

    This paper presents a novel design methodology for dimensioning optimal power-electronic converters, which is able to achieve the precision of numerical simulation-based optimization procedures, however minimizing the overall computation time. The approach is based on the utilization of analytical and frequency-domain design models for a numerical optimization process, a validation with numerical simulations of the intermediate optimal solutions, and the correction of the analytical design models precision from the numerical simulation results. This method allows using the numerical simulation in an efficient way, where typically less than ten correction iterations are required. In order to demonstrate the performances of the proposed methodology, the calculation of the control parameters for an H-bridge DC-DC converter and the optimal dimensioning of a damped output filter for a buck converter using the proposed approach is presented.

  13. Electronic and magnetic properties of modified silicene/graphene hybrid: Ab initio study

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhury, Suman; Jana, Debnarayan, E-mail: cujanad@yahoo.com

    2016-11-01

    Among other two-dimensional (2D) novel materials, graphene and silicene both have drawn intense research interest among the researchers because they possess some unique intriguing properties which can change the scenario of the current electronic industry. In this work we have studied the electronic and the magnetic properties of a new kind of materials which is the hybrid of these two materials. Density functional theory (DFT) has been employed to calculate the relevant electronic and magnetic properties of this hybrid material. The pristine structure is modified by substitutional doping or by creating vacancy (Y-X, where one Y atom (Si or C) has been replaced by one X atom (B, N, Al, P or void)). The calculations have revealed that void systems are unstable while Si-B and Si-N are most stable ones. It has been noticed that some of these doped structures are magnetic in nature having induced mid-gap states in the system. In particular, Si-void structure is unstable yet it possess the highest magnetic moment of the order of 4 μ{sub B} (μ{sub B} being the Bohr magneton). The estimated band gaps of modified silicene/graphene hybrid from spin polarized partial density of states (PDOS) vary between 1.43–2.38 eV and 1.58–2.50 eV for spin-up and spin-down channel respectively. The implication of midgap states has been critically analysed in the light of magnetic nature. This study may be useful to build hybrid spintronic devices with controllable gap for spin up and spin down states. - Graphical abstract: We have studied the electronic and magnetic properties of silicene/graphene hybrid by employing density functional theory (DFT). - Highlights: • Electronic and magnetic properties of two dimensional graphene/silicene hybrid have been explored. • There is no magnetism in the system for a single carbon atom vacancy. • A net magnetic moment of 4.0 Bohr magneton is observed for a single silicon atom vacancy. • Unpaired electrons introduce mid-gap states which

  14. Hybridized Electromagnetic-Triboelectric Nanogenerator for a Self-Powered Electronic Watch.

    Science.gov (United States)

    Quan, Ting; Wang, Xue; Wang, Zhong Lin; Yang, Ya

    2015-12-22

    We report a hybridized nanogenerator including a triboelectric nanogenerator (TENG) and six electromagnetic generators (EMGs) that can effectively scavenge biomechanical energy for sustainably powering an electronic watch. Triggered by the natural motions of the wearer's wrist, a magnetic ball at the center in an acrylic box with coils on each side will collide with the walls, resulting in outputs from both the EMGs and the TENG. By using the hybridized nanogenerator to harvest the biomechanical energy, the electronic watch can be continuously powered under different motion types of the wearer's wrist, where the best approach is to charge a 100 μF capacitor in 39 s to maintain the continuous operation of the watch for 456 s. To increase the working time of the watch further, a homemade Li-ion battery has been utilized as the energy storage unit for realizing the continuous working of the watch for about 218 min by using the hybridized nanogenerator to charge the battery within 32 min. This work will provide the opportunities for developing a nanogenerator-based built-in power source for self-powered wearable electronics such as an electronic watch.

  15. Photoionization of few electron systems with a hybrid Coupled Channels approach

    CERN Document Server

    Majety, Vinay Pramod; Scrinzi, Armin

    2014-01-01

    We present the hybrid anti-symmetrized coupled channels method for the calculation of fully differential photo-electron spectra of multi-electron atoms and small molecules interacting with strong laser fields. The method unites quantum chemical few-body electronic structure with strong-field dynamics by solving the time dependent Schr\\"odinger equation in a fully anti-symmetrized basis composed of multi-electron states from quantum chemistry and a one-electron numerical basis. Photoelectron spectra are obtained via the time dependent surface flux (tSURFF) method. Performance and accuracy of the approach are demonstrated for spectra from the helium and berryllium atoms and the hydrogen molecule in linearly polarized laser fields at wavelength from 21 nm to 400 nm. At long wavelengths, helium and the hydrogen molecule at equilibrium inter-nuclear distance can be approximated as single channel systems whereas beryllium needs a multi-channel description.

  16. Vehicle height and posture control of the electronic air suspension system using the hybrid system approach

    Science.gov (United States)

    Sun, Xiaoqiang; Cai, Yingfeng; Chen, Long; Liu, Yanling; Wang, Shaohua

    2016-03-01

    The electronic air suspension (EAS) system can improve ride comfort, fuel economy and handling safety of vehicles by adjusting vehicle height. This paper describes the development of a novel controller using the hybrid system approach to adjust the vehicle height (height control) and to regulate the roll and pitch angles of the vehicle body during the height adjustment process (posture control). The vehicle height adjustment system of EAS poses challenging hybrid control problems, since it features different discrete modes of operation, where each mode has an associated linear continuous-time dynamic. In this paper, we propose a novel approach to the modelling and controller design problem for the vehicle height adjustment system of EAS. The system model is described firstly in the hybrid system description language (HYSDEL) to obtain a mixed logical dynamical (MLD) hybrid model. For the resulting model, a hybrid model predictive controller is tuned to improve the vehicle height and posture tracking accuracy and to achieve the on-off statuses direct control of solenoid valves. The effectiveness and performance of the proposed approach are demonstrated by simulations and actual vehicle tests.

  17. Hybrid quantum circuit with a superconducting qubit coupled to an electron spin ensemble

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, Yuimaru; Grezes, Cecile; Vion, Denis; Esteve, Daniel; Bertet, Patrice [Quantronics Group, SPEC (CNRS URA 2464), CEA-Saclay, 91191 Gif-sur-Yvette (France); Diniz, Igor; Auffeves, Alexia [Institut Neel, CNRS, BP 166, 38042 Grenoble (France); Isoya, Jun-ichi [Research Center for Knowledge Communities, University of Tsukuba, 305-8550 Tsukuba (Japan); Jacques, Vincent; Dreau, Anais; Roch, Jean-Francois [LPQM (CNRS, UMR 8537), Ecole Normale Superieure de Cachan, 94235 Cachan (France)

    2013-07-01

    We report the experimental realization of a hybrid quantum circuit combining a superconducting qubit and an ensemble of electronic spins. The qubit, of the transmon type, is coherently coupled to the spin ensemble consisting of nitrogen-vacancy (NV) centers in a diamond crystal via a frequency-tunable superconducting resonator acting as a quantum bus. Using this circuit, we prepare arbitrary superpositions of the qubit states that we store into collective excitations of the spin ensemble and retrieve back into the qubit. We also report a new method for detecting the magnetic resonance of electronic spins at low temperature with a qubit using the hybrid quantum circuit, as well as our recent progress on spin echo experiments.

  18. Theoretical investigation of the electronic structures and carrier transport of hybrid graphene and boron nitride nanostructure

    Directory of Open Access Journals (Sweden)

    Jia-Tao Sun

    2012-09-01

    graphene and hexagonal boron nitride (C-BN nanostructures receive much research interest due to the complementary electronic properties. Graphene is a zero-gap semiconductor, while hexagonal boron nitride (h-BN is a wide gap semiconductor. Here we studied the electronic structures and carrier transport of hybrid C-BN nanostructures by using first principles calculations and deformation potential theory. We have found that the physical quantities in these systems under study, band gap, effective mass, deformation potential, and carrier mobility, can be categorised into three different families depending on the width of graphene nanoribbon. This family behavior is similar to pristine armchair graphene nanoribbon, but with slight difference from the individual component. New opportunities of designing nanoelectric devices are discussed by utilizing the quantum confinement effect based on such kind of hybrid nanostructures.

  19. Research Update: The electronic structure of hybrid perovskite layers and their energetic alignment in devices

    Directory of Open Access Journals (Sweden)

    Selina Olthof

    2016-09-01

    Full Text Available In recent years, the interest in hybrid organic–inorganic perovskites has increased at a rapid pace due to their tremendous success in the field of thin film solar cells. This area closely ties together fundamental solid state research and device application, as it is necessary to understand the basic material properties to optimize the performances and open up new areas of application. In this regard, the energy levels and their respective alignment with adjacent charge transport layers play a crucial role. Currently, we are lacking a detailed understanding about the electronic structure and are struggling to understand what influences the alignment, how it varies, or how it can be intentionally modified. This research update aims at giving an overview over recent results regarding measurements of the electronic structure of hybrid perovskites using photoelectron spectroscopy to summarize the present status.

  20. Hybrid simulation of whistler excitation by electron beams in two-dimensional non-periodic domains

    Energy Technology Data Exchange (ETDEWEB)

    Woodroffe, J.R., E-mail: woodrofj@erau.edu; Streltsov, A.V., E-mail: streltsa@erau.edu

    2014-11-01

    We present a two-dimensional hybrid fluid-PIC scheme for the simulation of whistler wave excitation by relativistic electron beams. This scheme includes a number of features which are novel to simulations of this type, including non-periodic boundary conditions and fresh particle injection. Results from our model suggest that non-periodicity of the simulation domain results in the development of fundamentally different wave characteristics than are observed in periodic domains.

  1. Role of Microstructure in the Electron-Hole Interaction of Hybrid Lead-Halide Perovskites

    OpenAIRE

    Grancini, Giulia; Srimath Kandada, Ajay Ram; Frost, Jarvist M.; Barker, Alex J; Bastiani, Michele; Gandini, Marina; Marras, Sergio; Lanzani, Guglielmo; Walsh, Aron; Petrozza, Annamaria

    2015-01-01

    Solar cells based on hybrid inorganic-organic halide perovskites have demonstrated high power conversion efficiencies in a range of architectures. The existence and stability of bound electron-hole pairs in these materials, and their role in the exceptional performance of optoelectronic devices, remains a controversial issue. Here we demonstrate, through a combination of optical spectroscopy and multiscale modeling as a function of the degree of polycrystallinity and temperature, that the ele...

  2. The superatom states of fullerenes and their hybridization into the nearly free electron bands of fullerites.

    Science.gov (United States)

    Zhao, Jin; Feng, Min; Yang, Jinlong; Petek, Hrvoje

    2009-04-28

    Motivated by the discovery of the superatom states of C60 molecules, we investigate the factors that influence their energy and wave function hybridization into nearly free electron bands in molecular solids. As the n = 3 solutions of the radial Schrodinger equation of the central attractive potential consisting of the short-range C atom core and the long-range collective screening potentials, respectively, located on the icosahedral C60 molecule shell and within its hollow core, superatom states are distinguished by their atom-like orbitals corresponding to different orbital angular momentum states (l = 0, 1, 2,...). Because they are less tightly bound than the pi orbitals, that is, the n = 2 states, which are often exploited in the intermolecular electron transport in aromatic organic molecule semiconductors, superatom orbitals hybridize more extensively among aggregated molecules to form bands with nearly free electron dispersion. The prospect of exploiting the strong intermolecular coupling to achieve metal-like conduction in applications such as molecular electronics may be attained by lowering the energy of superatom states from 3.5 eV for single chemisorbed C60 molecules to below the Fermi level; therefore, we study how the superatom state energies depend on factors such as their aggregation into 1D-3D solids, cage size, and exo- and endohedral doping by metal atoms. We find, indeed, that if the ionization potential of endohedral atom, such as copper, is sufficiently large, superatom states can form the conduction band in the middle of the gap between the HOMO and LUMO of the parent C60 molecule. Through a plane-wave density functional theory study, we provide insights for a new paradigm for intermolecular electronic interaction beyond the conventional one among the sp(n) hybridized orbitals of the organic molecular solids that could lead to design of novel molecular materials and quantum structures with extraordinary optical and electronic properties.

  3. Domain-dependent electronic structure and optical absorption property in hybrid organic-inorganic perovskite.

    Science.gov (United States)

    Meng, Xiang; Zhang, Ruifeng; Fu, Zhongheng; Zhang, Qianfan

    2016-10-05

    Hybrid organic-inorganic perovskites, represented by materials in the CH3NH3PbI3 series, have become one of the most promising materials for solar cells with a high power conversion efficiency and low cost. The ordered Pb-I cage in such hybrid perovskites can induce the polarized cations to form a variety of polarization domains with long-range order, which will lead to the formation of specific atomic conformations or metastable crystalline phases, unique electronic band structures and optical absorption properties. Such domain-dependent characteristics play a critical role in the phase transition and service stability of such solar cells, and also open up the opportunity of tuning their electronic structure. In the present study, we systematically investigate the band structures and optical absorption properties of different electronically ordered domains in CH3NH3PbI3. By comparing different perovskites containing various cations, we have clarified the important influence of cation polarization on domain-dependent properties. Our results provide not only a possible pathway for the manipulation of band structure by applying an external field, but also a novel scheme for improving the performance and stability of hybrid perovskites.

  4. One-chip electronic detection of DNA hybridization using precision impedance-based CMOS array sensor.

    Science.gov (United States)

    Lee, Kang-Ho; Lee, Jeong-Oen; Sohn, Mi-Jin; Lee, Byunghun; Choi, Suk-Hwan; Kim, Sang Kyu; Yoon, Jun-Bo; Cho, Gyu-Hyeong

    2010-12-15

    This paper describes a label-free and fully electronic detection method of DNA hybridization, which is achieved through the use of a 16×8 microarray sensor in conjunction with a new type of impedance spectroscopy constructed with standard complementary metal-oxide-semiconductor (CMOS) technology. The impedance-based method is based on changes in the reactive capacitance and the charge-transfer resistance after hybridization with complementary DNA targets. In previously published label-free techniques, the measured capacitance presented unstable capacitive properties due to the parallel resistance that is not infinite and can cause a leakage by discharging the charge on the capacitor. This paper presents an impedance extraction method that uses excitation by triangular wave voltage, which enables a reliable measurement of both C and R producing a highly sensitive sensor with a stable operation independent of external variables. The system was fabricated in an industrial 0.35-μm 4-metal 2-poly CMOS process, integrating working electrodes and readout electronics into one chip. The integrated readout, which uses a parasitic insensitive integrator, achieves an enlarged detection range and improved noise performance. The maximum average relative variations of C and R are 31.5% and 68.6%, respectively, after hybridization with a 1 μM target DNA. The proposed sensor allows quantitative evaluation of the molecule densities on the chip with distinguishable variation in the impedance. This fully electronic microsystem has great potential for use with bioanalytical tools and point-of-care diagnosis.

  5. Photoemission study of ferrocenes: insights into the electronic structure of Si-based hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Boccia, A; Marrani, A G; Stranges, S; Zanoni, R [Dipartimento di Chimica, Universita degli Studi di Roma ' La Sapienza' , piazzale Aldo Moro 5, I-00185 Rome (Italy); Alagia, M [ISMN-CNR, Sezione Romal, Piazzale Aldo Moro 5, I-00185 Roma, Italy and Laboratorio Nazionale TASC-CNR SS-14, Km 163.5, Basovizza, I-34012 Trieste (Italy); Iozzi, M F; Cossi, M [Dipartimento di Scienze dell' Ambiente e della Vita, Universita del Piemonte Orientale, via V. Bellini 25/G, I-15100 Alessandria (Italy)], E-mail: Andrea.Marrani@uniromal.it

    2008-03-15

    We present here the results of synchrotron radiation-excited UV-photoemission investigation and DFT calculations on vinylferrocene (VFC), a redox molecule suitable for applications in molecular electronics. A detailed assignment is discussed of the valence photoelectron spectra (UPS), which provides new data on the electronic structure and offers a partial re-interpretation of previous assignments on VFC based on theoretical and experimental evidences. Furthermore, the present results can allow for a meaningful comparison of photoemission results from the corresponding hybrid obtained by covalently attaching VFC to Si oriented surfaces.

  6. Quantum teleportation and entanglement swapping of electron spins in superconducting hybrid structures

    Energy Technology Data Exchange (ETDEWEB)

    Bubanja, Vladimir, E-mail: vladimir.bubanja@callaghaninnovation.govt.nz

    2015-06-15

    We present schemes for quantum teleportation and entanglement swapping of electronic spin states in hybrid superconductor–normal-metal systems. The proposed schemes employ subgap transport whereby the lowest order processes involve Cooper pair-electron and double Cooper-pair cotunneling in quantum teleportation and entanglement swapping protocols, respectively. The competition between elastic cotunneling and Cooper-pair splitting results in the success probability of 25% in both cases. Described implementations of these protocols are within reach of present-day experimental techniques.

  7. A hybrid density functional study on the electron and hole trap states in anatase titanium dioxide.

    Science.gov (United States)

    Yamamoto, Takenori; Ohno, Takahisa

    2012-01-14

    We present a theoretical study on electron and hole trap states in the bulk and (001) surface of anatase titanium dioxide using screened hybrid density functional calculations. In both the bulk and surface, calculations suggest that the neutral and ionized oxygen vacancies are possible electron traps. The doubly ionized oxygen vacancy is the most stable in the bulk, and is a candidate for a shallow donor in colorless anatase crystals. The hole trap states are localized at oxygen anions in both the bulk and surface. The self-trapped electron centered at a titanium cation cannot be produced in the bulk, but can be formed at the surface. The electron trap level at the surface oxygen vacancy is consistent with observations by photoelectron spectroscopy. The optical absorptions and luminescence in UV-irradiated anatase nanoparticles are found to come from the surface self-trapped hole and the surface oxygen vacancy.

  8. The nature of excess electrons in anatase and rutile from hybrid DFT and RPA.

    Science.gov (United States)

    Spreafico, Clelia; VandeVondele, Joost

    2014-12-21

    The behavior of excess electrons in undoped and defect free bulk anatase and rutile TiO2 has been investigated by state-of-the-art electronic structure methods including hybrid density functional theory (DFT) and the random phase approximation (RPA). Consistent with experiment, charge trapping and polaron formation is observed in both anatase and rutile. The difference in the anisotropic shape of the polarons is characterized, confirming for anatase the large polaron picture. For anatase, where polaron formation energies are small, charge trapping is observed also with standard hybrid functionals, provided the simulation cell is sufficiently large (864 atoms) to accommodate the lattice relaxation. Even though hybrid orbitals are required as a starting point for RPA in this system, the obtained polaron formation energies are relatively insensitive to the amount of Hartree-Fock exchange employed. The difference in trapping energy between rutile and anatase can be obtained accurately with both hybrid functionals and RPA. Computed activation energies for polaron hopping and delocalization clearly show that anatase and rutile might have different charge transport mechanisms. In rutile, only hopping is likely, whereas in anatase hopping and delocalization are competing. Delocalization will result in conduction-band-like and thus enhanced transport. Anisotropic conduction, in agreement with experimental data, is observed, and results from the tendency to delocalize in the [001] direction in rutile and the (001) plane in anatase. For future work, our calculations serve as a benchmark and suggest RPA on top on hybrid orbitals (PBE0 with 30% Hartree-Fock exchange), as a suitable method to study the rich chemistry and physics of TiO2.

  9. The analysis of single-electron orbits in a free electron laser based upon a rectangular hybrid wiggler

    Science.gov (United States)

    Kordbacheh, A.; Ghahremaninezhad, Roghayeh; Maraghechi, B.

    2012-09-01

    A three-dimensional analysis of a novel free-electron laser (FEL) based upon a rectangular hybrid wiggler (RHW) is presented. This RHW is designed in a configuration composed of rectangular rings with alternating ferrite and dielectric spacers immersed in a solenoidal magnetic field. An analytic model of RHW is introduced by solution of Laplace's equation for the magnetostatic fields under the appropriate boundary conditions. The single-electron orbits in combined RHW and axial guide magnetic fields are studied when only the first and the third spatial harmonic components of the RHW field are taken into account and the higher order terms are ignored. The results indicate that the third spatial harmonic leads to group III orbits with a strong negative mass regime particularly in large solenoidal magnetic fields. RHW is found to be a promising candidate with favorable characteristics to be used in microwave FEL.

  10. Direct switching control of DC-DC power electronic converters using hybrid system theory

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, J.; Lin, F. [Wayne State Univ., Detroit, MI (United States). Dept. of Electrical and Computer Engineering; Wang, C. [Wayne State Univ., Detroit, MI (United States). Dept. of Electrical and Computer Engineering; Wayne State Univ., Detroit, MI (United States). Div. of Engineering Technology

    2010-07-01

    A direct switching control (DSC) scheme for power electronics converters was described. The system was designed for use in both traditional and renewable energy applications as well as in electric drive vehicles. The proposed control scheme was based on a detailed hybrid system converter model that used model predictive control (MPC), piecewise affine (PWA) approximations and constrained optimal control methods. A DC-DC converter was modelled as a hybrid machine. Switching among different modes of the DC-DC converter were modelled as discrete events controlled by the hybrid controller. The modelling scheme was applied to a Buck converter. The DSC was used to control the switch of the power converter based on a hybrid machine model. Results of the study showed that the method can be used to regulate output voltage and inductor currents. The method also provides fast transient responses and effectively regulates both currents and voltage. The controller can be used to provide immediate responses to dynamic disturbances and output voltage fluctuations. 23 refs., 7 figs.

  11. Direct measurement of recombination frequency in interspecific hybrids between Hordeum vulgare and H. bulbosum using genomic in situ hybridization.

    Science.gov (United States)

    Zhang, L; Pickering, R; Murray, B

    1999-09-01

    Two different genotypes of diploid Hordeum vulgare x H. bulbosum hybrids, which differ in their pattern of meiotic metaphase pairing behaviour, were investigated at MI and AI by genomic in situ hybridization (GISH). One hybrid, 102C2, showed a high frequency of bivalents at metaphase I whereas the other, 103K5, showed a high frequency of univalents. The GISH analysis of both hybrids established that pairing occurred only between chromosomes of different parental genomes and revealed that pairing frequency greatly exceeded recombination. Hybrid 102C2 had a significantly higher recombination frequency than 103K5, but in both hybrids recombination involved only distal chromosome regions. However, an interesting finding is that the ratio of recombination to pairing frequency in 103K5 (1:8.9) is twice as high compared with 102C2 (1:17). The hybrids also differed in chromosome stability; little chromosome elimination occurred in 102C2 but 103K5 showed extensive chromosome loss. It appears that the high frequency of bound arms at MI favours retention of H. bulbosum chromosomes and maintains stability of chromosome numbers in PMCs. Various ideas are put forward to explain the discrepancy between meiotic pairing frequency and recombination in these hybrids.

  12. Hybrid density functional study of the structural, bonding, and electronic properties of bismuth vanadate

    Science.gov (United States)

    Kweon, Kyoung E.; Hwang, Gyeong S.

    2012-10-01

    The structure and property prediction of metal oxides can significantly be improved by incorporating exact Hartree-Fock (HF) exchange into density functional theory (DFT), which is the so-called hybrid DFT. We explored the impact of HF exchange inclusion on the predicted structural, bonding, and electronic properties of bismuth vanadate (BiVO4), with particular attention to the difference between its monoclinic and tetragonal scheelite phases. The applied exchange-correlation (xc) functionals include the gradient corrected Perdew-Burke-Ernzerhof (PBE) and the PBE-HF hybrid functionals with HF exchange amounts of 10%, 25%, and 50%. We find that the PBE-HF25% yields a monoclinic structure in very close agreement with the experimentally determined structure, while the PBE-HF50% tends to overestimate the monoclinic distortion and the PBE/PBE-HF10% can hardly identify a distinct monoclinic configuration at ambient conditions. Electronic structure analysis reveals that the increasing monoclinic distortion with the amount of HF exchange is related to the enhancement of hybridization between Bi 6s-O 2p antibonding states and unoccupied Bi 6p states. The bonding mechanisms and band structures of the monoclinic and tetragonal phases of BiVO4 were also investigated, and we discuss how the predictions are sensitive to the xc functional choice.

  13. Electronic structures of one-dimensional metal-molecule hybrid chains studied using scanning tunneling microscopy and density functional theory.

    Science.gov (United States)

    Chung, Kyung-Hoon; Koo, Bon-Gil; Kim, Howon; Yoon, Jong Keon; Kim, Ji-Hoon; Kwon, Young-Kyun; Kahng, Se-Jong

    2012-05-28

    The electronic structures of self-assembled hybrid chains comprising Ag atoms and organic molecules were studied using scanning tunneling microscopy (STM) and spectroscopy (STS) in parallel with density functional theory (DFT). Hybrid chains were prepared by catalytic breaking of Br-C bonds in 4,4″-dibromo-p-terphenyl molecules, followed by spontaneous formation of Ag-C bonds on Ag(111). An atomic model was proposed for the observed hybrid chain structures. Four electronic states were resolved using STS measurements, and strong energy dependence was observed in STM images. These results were explained using first-principles calculations based on DFT.

  14. Femtosecond spectroscopic studies of photoinduced electron transfer in MDMO-PPV:ZnO hybrid bulk heterojunctions

    Energy Technology Data Exchange (ETDEWEB)

    Cecchetto, E.; De Cola, L. [Institute of Physics, University of Muenster, Mendelstrasse 7, 48149 Muenster (Germany); Slooff, H. [ECN Solar Energy, P.O. Box 1, 1755 ZG Petten (Netherlands); Zhang, H. [Van ' t Hoff Institute for Molecular Sciences, University of Amsterdam, Nieuwe Achtergracht 129, 1018 WS Amsterdam (Netherlands)

    2007-01-15

    The photophysics of charge carriers (polaron) in MDMO-PPV:ZnO hybrid bulk heterojunction is studied at 80 K by femtosecond transient absorption spectroscopy. A short-lived positive polaron is observed in the blend phase in MDMO-PPV:ZnO blend films with a weight ratio of 1:1 and 1:2. Further increase of ZnO weight ratio results in a significant quenching of the polaron absorption. The results are discussed in the concept that both pristine polymer and MDMO-PPV:ZnO blend phases coexist in the blend films. It is concluded that a polaron is photogenerated within the excitation laser pulse (<100 fs) and electron transfer efficiency is highest in blend films 1:1 and 1:2. Lack of the interfacial area and faster back electron transfer process are discussed to be responsible for the quenching of the electron transfer efficiency in blend film 1:3.

  15. A linear dispersion relation for the hybrid kinetic-ion/fluid-electron model of plasma physics

    CERN Document Server

    Told, Daniel; Astfalk, Patrick; Jenko, Frank

    2016-01-01

    A dispersion relation for a commonly used hybrid model of plasma physics is developed, which combines fully kinetic ions and a massless-electron fluid description. Although this model and variations of it have been used to describe plasma phenomena for about 40 years, to date there exists no general dispersion relation to describe the linear wave physics contained in the model. Previous efforts along these lines are extended here to retain arbitrary wave propagation angles, temperature anisotropy effects, as well as additional terms in the generalized Ohm's law which determines the electric field. A numerical solver for the dispersion relation is developed, and linear wave physics is benchmarked against solutions of a full Vlasov-Maxwell dispersion relation solver. This work opens the door to a more accurate interpretation of existing and future wave and turbulence simulations using this type of hybrid model.

  16. Hybrid two-dimensional electronic systems and other applications of sp-2 bonded light elements

    Science.gov (United States)

    Kessler, Brian Maxwell

    The field-effect is a cornerstone of modern technology lying at the heart of transistors in consumer electronics. Experimentally, it allows one to continuously vary the carrier concentration in a material while studying its properties. The recent isolation of graphene, the first truly two-dimensional crystal, allows application of the field effect to a much wider range of physical situations. In the first part of the thesis, we investigate hybrid materials formed by coupling metals to the two-dimensional electron gas (2DEG) in graphene. We couple superconducting materials to the graphene sheet by cluster deposition. This material displays a superconducting phase whose properties are tuned by the carrier density via the field effect. The transition temperature is well-described by Berezinskii-Kosterlitz-Thouless vortex unbinding. The ground state properties show interesting effects due to the distribution of cluster spacings. Observations related to other hybrid electronic systems including ferromagnets and normal metals are presented. The second part of this thesis involves energy applications of light element materials. The mechanisms affecting coating of carbon nanotubes using atomic layer deposition is developed and applied to photovoltaic systems. The gas adsorption properties of activated boron nitride are investigated and the relative influence of surface area and hydrogen binding affinity is elaborated. The third part of this thesis explores electromechanical properties of suspended graphene membranes. We investigate buckling and strain in exfoliated graphene membranes as well as their deformation under an applied gate potential.

  17. Fluorescent Nanodiamond-Gold Hybrid Particles for Multimodal Optical and Electron Microscopy Cellular Imaging.

    Science.gov (United States)

    Liu, Weina; Naydenov, Boris; Chakrabortty, Sabyasachi; Wuensch, Bettina; Hübner, Kristina; Ritz, Sandra; Cölfen, Helmut; Barth, Holger; Koynov, Kaloian; Qi, Haoyuan; Leiter, Robert; Reuter, Rolf; Wrachtrup, Jörg; Boldt, Felix; Scheuer, Jonas; Kaiser, Ute; Sison, Miguel; Lasser, Theo; Tinnefeld, Philip; Jelezko, Fedor; Walther, Paul; Wu, Yuzhou; Weil, Tanja

    2016-10-12

    There is a continuous demand for imaging probes offering excellent performance in various microscopy techniques for comprehensive investigations of cellular processes by more than one technique. Fluorescent nanodiamond-gold nanoparticles (FND-Au) constitute a new class of "all-in-one" hybrid particles providing unique features for multimodal cellular imaging including optical imaging, electron microscopy, and, and potentially even quantum sensing. Confocal and optical coherence microscopy of the FND-Au allow fast investigations inside living cells via emission, scattering, and photothermal imaging techniques because the FND emission is not quenched by AuNPs. In electron microscopy, transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) analysis of FND-Au reveals greatly enhanced contrast due to the gold particles as well as an extraordinary flickering behavior in three-dimensional cellular environments originating from the nanodiamonds. The unique multimodal imaging characteristics of FND-Au enable detailed studies inside cells ranging from statistical distributions at the entire cellular level (micrometers) down to the tracking of individual particles in subcellular organelles (nanometers). Herein, the processes of endosomal membrane uptake and release of FNDs were elucidated for the first time by the imaging of individual FND-Au hybrid nanoparticles with single-particle resolution. Their convenient preparation, the availability of various surface groups, their flexible detection modalities, and their single-particle contrast in combination with the capability for endosomal penetration and low cytotoxicity make FND-Au unique candidates for multimodal optical-electronic imaging applications with great potential for emerging techniques, such as quantum sensing inside living cells.

  18. Donor-acceptor graphene-based hybrid materials facilitating photo-induced electron-transfer reactions.

    Science.gov (United States)

    Stergiou, Anastasios; Pagona, Georgia; Tagmatarchis, Nikos

    2014-01-01

    Graphene research and in particular the topic of chemical functionalization of graphene has exploded in the last decade. The main aim is to increase the solubility and thereby enhance the processability of the material, which is otherwise insoluble and inapplicable for technological applications when stacked in the form of graphite. To this end, initially, graphite was oxidized under harsh conditions to yield exfoliated graphene oxide sheets that are soluble in aqueous media and amenable to chemical modifications due to the presence of carboxylic acid groups at the edges of the lattice. However, it was obvious that the high-defect framework of graphene oxide cannot be readily utilized in applications that are governed by charge-transfer processes, for example, in solar cells. Alternatively, exfoliated graphene has been applied toward the realization of some donor-acceptor hybrid materials with photo- and/or electro-active components. The main body of research regarding obtaining donor-acceptor hybrid materials based on graphene to facilitate charge-transfer phenomena, which is reviewed here, concerns the incorporation of porphyrins and phthalocyanines onto graphene sheets. Through illustrative schemes, the preparation and most importantly the photophysical properties of such graphene-based ensembles will be described. Important parameters, such as the generation of the charge-separated state upon photoexcitation of the organic electron donor, the lifetimes of the charge-separation and charge-recombination as well as the incident-photon-to-current efficiency value for some donor-acceptor graphene-based hybrids, will be discussed.

  19. Hybrid Numerical Solvers for Massively Parallel Eigenvalue Computation and Their Benchmark with Electronic Structure Calculations

    CERN Document Server

    Imachi, Hiroto

    2015-01-01

    Optimally hybrid numerical solvers were constructed for massively parallel generalized eigenvalue problem (GEP).The strong scaling benchmark was carried out on the K computer and other supercomputers for electronic structure calculation problems in the matrix sizes of M = 10^4-10^6 with upto 105 cores. The procedure of GEP is decomposed into the two subprocedures of the reducer to the standard eigenvalue problem (SEP) and the solver of SEP. A hybrid solver is constructed, when a routine is chosen for each subprocedure from the three parallel solver libraries of ScaLAPACK, ELPA and EigenExa. The hybrid solvers with the two newer libraries, ELPA and EigenExa, give better benchmark results than the conventional ScaLAPACK library. The detailed analysis on the results implies that the reducer can be a bottleneck in next-generation (exa-scale) supercomputers, which indicates the guidance for future research. The code was developed as a middleware and a mini-application and will appear online.

  20. Highly transparent, low-haze, hybrid cellulose nanopaper as electrodes for flexible electronics.

    Science.gov (United States)

    Xu, Xuezhu; Zhou, Jian; Jiang, Long; Lubineau, Gilles; Ng, Tienkhee; Ooi, Boon S; Liao, Hsien-Yu; Shen, Chao; Chen, Long; Zhu, J Y

    2016-06-16

    Paper is an excellent candidate to replace plastics as a substrate for flexible electronics due to its low cost, renewability and flexibility. Cellulose nanopaper (CNP), a new type of paper made of nanosized cellulose fibers, is a promising substrate material for transparent and flexible electrodes due to its potentially high transparency and high mechanical strength. Although CNP substrates can achieve high transparency, they are still characterized by high diffuse transmittance and small direct transmittance, resulting in high optical haze of the substrates. In this study, we proposed a simple methodology for large-scale production of high-transparency, low-haze CNP comprising both long cellulose nanofibrils (CNFs) and short cellulose nanocrystals (CNCs). By varying the CNC/CNF ratio in the hybrid CNP, we could tailor its total transmittance, direct transmittance and diffuse transmittance. By increasing the CNC content, the optical haze of the hybrid CNP could be decreased and its transparency could be increased. The direct transmittance and optical haze of the CNP were 75.1% and 10.0%, respectively, greatly improved from the values of previously reported CNP (31.1% and 62.0%, respectively). Transparent, flexible electrodes were fabricated by coating the hybrid CNP with silver nanowires (AgNWs). The electrodes showed a low sheet resistance (minimum 1.2 Ω sq(-1)) and a high total transmittance (maximum of 82.5%). The electrodes were used to make a light emitting diode (LED) assembly to demonstrate their potential use in flexible displays.

  1. A hybrid electron donor comprising cyclopentadithiophene and dithiafulvenyl for dye-sensitized solar cells

    Directory of Open Access Journals (Sweden)

    Gleb Sorohhov

    2015-06-01

    Full Text Available Two new photosensitizers featured with a cyanoacrylic acid electron acceptor (A and a hybrid electron donor (D of cyclopentadithiophene and dithiafulvenyl, either directly linked or separated by a phenyl ring, were synthesized and characterized. Both of them undergo two reversible oxidations and strongly absorb in the visible spectral region due to a photo-induced intramolecular charge-transfer (ICT transition. To a great extent, the electronic interaction between the D and A units is affected by the presence of a phenyl spacer. Without a phenyl ring, the D unit appears more difficult to oxidize due to a strong electron-withdrawing effect of the A moiety. In sharp contrast, the insertion of the phenyl ring between the D and A units leads to a broken π-conjugation and therefore, the oxidation potentials remain almost unchanged compared to those of an analogue without the A group, suggesting that the electronic coupling between D and A units is relatively weak. As a consequence, the lowest-energy absorption band shows a slight hypsochromic shift upon the addition of the phenyl spacer, indicative of an increased HOMO–LUMO gap. In turn, the direct linkage of D and A units leads to an effective π-conjugation, thus substantially lowering the HOMO–LUMO gap. Moreover, the application in dye-sensitized solar cells was investigated, showing that the power conversion efficiency increases by the insertion of the phenyl unit.

  2. A hybrid electron donor comprising cyclopentadithiophene and dithiafulvenyl for dye-sensitized solar cells.

    Science.gov (United States)

    Sorohhov, Gleb; Yi, Chenyi; Grätzel, Michael; Decurtins, Silvio; Liu, Shi-Xia

    2015-01-01

    Two new photosensitizers featured with a cyanoacrylic acid electron acceptor (A) and a hybrid electron donor (D) of cyclopentadithiophene and dithiafulvenyl, either directly linked or separated by a phenyl ring, were synthesized and characterized. Both of them undergo two reversible oxidations and strongly absorb in the visible spectral region due to a photo-induced intramolecular charge-transfer (ICT) transition. To a great extent, the electronic interaction between the D and A units is affected by the presence of a phenyl spacer. Without a phenyl ring, the D unit appears more difficult to oxidize due to a strong electron-withdrawing effect of the A moiety. In sharp contrast, the insertion of the phenyl ring between the D and A units leads to a broken π-conjugation and therefore, the oxidation potentials remain almost unchanged compared to those of an analogue without the A group, suggesting that the electronic coupling between D and A units is relatively weak. As a consequence, the lowest-energy absorption band shows a slight hypsochromic shift upon the addition of the phenyl spacer, indicative of an increased HOMO-LUMO gap. In turn, the direct linkage of D and A units leads to an effective π-conjugation, thus substantially lowering the HOMO-LUMO gap. Moreover, the application in dye-sensitized solar cells was investigated, showing that the power conversion efficiency increases by the insertion of the phenyl unit.

  3. Tunable Radiation Response in Hybrid Organic-Inorganic Gate Dielectrics for Low-Voltage Graphene Electronics.

    Science.gov (United States)

    Arnold, Heather N; Cress, Cory D; McMorrow, Julian J; Schmucker, Scott W; Sangwan, Vinod K; Jaber-Ansari, Laila; Kumar, Rajan; Puntambekar, Kanan P; Luck, Kyle A; Marks, Tobin J; Hersam, Mark C

    2016-03-01

    Solution-processed semiconductor and dielectric materials are attractive for future lightweight, low-voltage, flexible electronics, but their response to ionizing radiation environments is not well understood. Here, we investigate the radiation response of graphene field-effect transistors employing multilayer, solution-processed zirconia self-assembled nanodielectrics (Zr-SANDs) with ZrOx as a control. Total ionizing dose (TID) testing is carried out in situ using a vacuum ultraviolet source to a total radiant exposure (RE) of 23.1 μJ/cm(2). The data reveal competing charge density accumulation within and between the individual dielectric layers. Additional measurements of a modified Zr-SAND show that varying individual layer thicknesses within the gate dielectric tuned the TID response. This study thus establishes that the radiation response of graphene electronics can be tailored to achieve a desired radiation sensitivity by incorporating hybrid organic-inorganic gate dielectrics.

  4. Role of Microstructure in the Electron-Hole Interaction of Hybrid Lead-Halide Perovskites

    Science.gov (United States)

    Frost, Jarvist M.; Barker, Alex J.; De Bastiani, Michele; Gandini, Marina; Marras, Sergio; Lanzani, Guglielmo; Walsh, Aron; Petrozza, Annamaria

    2015-01-01

    Solar cells based on hybrid inorganic-organic halide perovskites have demonstrated high power conversion efficiencies in a range of architectures. The existence and stability of bound electron-hole pairs in these materials, and their role in the exceptional performance of optoelectronic devices, remains a controversial issue. Here we demonstrate, through a combination of optical spectroscopy and multiscale modeling as a function of the degree of polycrystallinity and temperature, that the electron-hole interaction is sensitive to the microstructure of the material. The long-range order is disrupted by polycrystalline disorder and the variations in electrostatic potential found for smaller crystals suppress exciton formation, while larger crystals of the same composition demonstrate an unambiguous excitonic state. We conclude that fabrication procedures and morphology strongly influence perovskite behaviour, with both free carrier and excitonic regimes possible, with strong implications for optoelectronic devices. PMID:26442125

  5. Hybrid bio-organic interfaces with matchable nanoscale topography for durable high extracellular electron transfer activity.

    Science.gov (United States)

    Ding, Chunmei; Liu, Huan; Lv, Meiling; Zhao, Tianyi; Zhu, Ying; Jiang, Lei

    2014-07-21

    Here, we developed a novel hybrid bio-organic interface with matchable nano-scale topography between a polypyrrole nanowire array (PPy-NA) and the bacterium Shewanella, which enabled a remarkably increased extracellular electron transfer (EET) current from genus Shewanella over a rather long period. PPy-NA thus exhibited outstanding performance in mediating bacterial EET, which was superior to normal electrodes such as carbon plates, Au and tin-doped In₂O₃. It was proposed that the combined effect of the inherent electrochemical nature of PPy and the porous structured bacterial network that was generated on the PPy-NA enabled long-term stability, while the high efficiency was attributed to the enhanced electron transfer rate between PPy-NA and microbes caused by the enhanced local topological interactions.

  6. Role of Microstructure in the Electron-Hole Interaction of Hybrid Lead-Halide Perovskites.

    Science.gov (United States)

    Grancini, Giulia; Srimath Kandada, Ajay Ram; Frost, Jarvist M; Barker, Alex J; De Bastiani, Michele; Gandini, Marina; Marras, Sergio; Lanzani, Guglielmo; Walsh, Aron; Petrozza, Annamaria

    2015-10-01

    Solar cells based on hybrid inorganic-organic halide perovskites have demonstrated high power conversion efficiencies in a range of architectures. The existence and stability of bound electron-hole pairs in these materials, and their role in the exceptional performance of optoelectronic devices, remains a controversial issue. Here we demonstrate, through a combination of optical spectroscopy and multiscale modeling as a function of the degree of polycrystallinity and temperature, that the electron-hole interaction is sensitive to the microstructure of the material. The long-range order is disrupted by polycrystalline disorder and the variations in electrostatic potential found for smaller crystals suppress exciton formation, while larger crystals of the same composition demonstrate an unambiguous excitonic state. We conclude that fabrication procedures and morphology strongly influence perovskite behaviour, with both free carrier and excitonic regimes possible, with strong implications for optoelectronic devices.

  7. Detection of secondary electrons with pixelated hybrid semiconductor detectors; Sekundaerelektronennachweis mit pixelierten hybriden Halbleiterdetektoren

    Energy Technology Data Exchange (ETDEWEB)

    Gebert, Ulrike Sonja

    2011-09-14

    Within the scope of this thesis, secondary electrons were detected with a pixelated semiconductor detector named Timepix. The Timepix detector consists of electronics and a sensor made from a semiconductor material. The connection of sensor and electronics is done for each pixel individually using bump bonds. Electrons with energies above 3 keV can be detected with the sensor. One electron produces a certain amount of electron-hole pairs according to its energy. The charge then drifts along an electric field to the pixel electronics, where it induces an electric signal. Even without a sensor it is possible to detect an electric signal from approximately 1000 electrons directly in the pixel electronics. Two different detector systems to detect secondary electrons using the Timepix detector were investigated during this thesis. First of all, a hybrid photon detector (HPD) was used to detect single photoelectrons. The HPD consists of a vacuum vessel with an entrance window and a cesium iodine photocathode at the inner surface of the window. Photoelectrons are released from the photocathode by incident light and are accelerated in an electric field towards the Timepix detector, where the point of interaction and the arrival time of the electron is determined. With a proximity focusing setup, a time resolution of 12 ns (with an acceleration voltage of 20 kV between photocathode and Timepix detector) was obtained. The HPD examined in this thesis showed a strong dependence of the dark rate form the acceleration voltage and the pressure in the vacuum vessel. At a pressure of few 10{sup -5} mbar and an acceleration voltage of 20 kV, the dark rate was about 800 Hz per mm{sup 2} area of the read out photocathode. One possibility to reduce the dark rate is to identify ion feedback events. With a slightly modified setup it was possible to reduce the dark rate to 0.5 Hz/mm{sup 2}. To achieve this, a new photocathode was mounted in a shorter distance to the detector. The

  8. Design of hybrid sol gel films for direct x-ray and electron beam nanopatterning

    Science.gov (United States)

    Brusatin, Giovanna; Della Giustina, Gioia; Romanato, Filippo; Guglielmi, Massimo

    2008-04-01

    New epoxy based sol-gel organic inorganic materials, showing lithographic resist-like properties without the addition of any photocatalysts, are presented. To obtain a material sensitive to radiation, specific sol-gel syntheses based on an organically modified alkoxide containing an epoxy ring, 3-glycidoxypropyltrimethoxysilane (GPTMS), have been developed. The synthesis and the patternability of hybrid materials have been obtained controlling the inorganic crosslinking degree and with an almost total absence of organic polymerization. Two examples of directly patternable hybrid films, called GB and GGe, have been synthesized using acidic (GGe) and basic (GB) conditions and obtaining different compositions. After electron beam lithography (EBL) or x-ray synchrotron radiation lithography (XRL) the polymerization of the organic component of the sol-gel film occurs, generating a hardening of the structure after post-exposure baking. The exposed polymerized material becomes insoluble, determining a negative resist-like behaviour of the film: the lithographic process of nanopatterning results from the dissolution of the unexposed areas in proper solvents (developers). Spatial resolution of the order of 200 nm is reported and a contrast of 2.2 is achieved. The novelty of this work is that epoxy based materials, which have enhanced thermomechanical stability with respect to the more usual acrylic based resins, are directly nanopatterned for the first time by electron beam (EB) and/or x-ray beam radiation exposure without the aid of catalysts for polymerization. In contrast to common resists that are sacrificial layers of the fabrication process, direct patternable sol-gel hybrids constitute the final material of the devices. In fact, an example of doping with a light emitting dye is reported together with the achievement of directly patterned structures by EBL and XRL.

  9. Hybrid CIS-DFT method to study electric field effects on electronic excited states of ethylene

    Institute of Scientific and Technical Information of China (English)

    Ma Mei-Zhong; Zhu Zheng-He; Chen Xiao-Jun; Xu Guo-Liang; Zhang Yong-Bin; Mao Hua-Ping; Shen Xiao-Hong

    2005-01-01

    The present work is devoted to the study of the effects of external dipole electric field on the molecular structure of ethylene using a hybrid method which combines the single-excitation configuration interactions (CIS) with density functional theory (DFT), i.e. CIS-DFT(B3LYP). It is found that the effects of electric dipole field on the molecular geometry (D2h, D2d and C2v), dipole moment, transition dipole moment, polarizability and, particularly, excitation energy of ethylene are remarkable. The advantages of the hybrid CIS-DFT method are that it can determine the symmetry of molecule and the correct order of excitation as well as the Molecular Orbital (MO) electron configuration;thereby the electronic excitation states of ethylene are easily derived, and most of them are in agreement with those obtained in experiments or references. It may be the first time the effects of external electric field on ethylene molecule have been considered. Compared with other ab initio methods, the CIS-DFT method is relatively accurate and low cost in computation. We expect that it can be used to study other closed-shell molecules.

  10. Nuclear and cytoplasmic genome composition of Solanum bulbocastanum (+) S. tuberosum somatic hybrids.

    Science.gov (United States)

    Iovene, Marina; Savarese, Salvatore; Cardi, Teodoro; Frusciante, Luigi; Scotti, Nunzia; Simon, Philipp W; Carputo, Domenico

    2007-05-01

    Somatic hybrids between the wild incongruent species Solanum bulbocastanum (2n = 2x = 24) and S. tuberosum haploids (2n = 2x = 24) have been characterized for their nuclear and cytoplasmic genome composition. Cytologic observations revealed the recovery of 8 (near-)tetraploid and 3 hexaploid somatic hybrids. Multicolor genomic in situ hybridization (GISH) analysis was carried out to study the genomic dosage of the parental species in 5 somatic hybrids with different ploidy. The GISH procedure used was effective in discriminating parental genomes in the hybrids; most chromosomes were unambiguously colored. Two (near-)tetraploid somatic hybrids showed the expected 2:2 cultivated-to-wild genomic dosage; 2 hexaploids revealed a 4:2 cultivated-to-wild genomic dosage, and 1 hexaploid had a 2:4 cultivated-to-wild genomic dosage. Characterization of hybrid cytoplasmic genomes was performed using gene-specific primers that detected polymorphisms between the fusion parents in the intergenic regions. The analysis showed that most of the somatic hybrids inherited the plastidial and mitochondrial DNA of the cultivated parent. A few hybrids, with a rearranged mitochondrial genome (showing fragments derived from both parents), were also identified. These results confirmed the potential of somatic hybridization in producing new variability for genetic studies and breeding.

  11. Obtaining Polyploids and Genome Analysis of Tetraploids by GISH in Citrus grandis cv. Shatianyou%沙田柚多倍体的获得与基因组原位杂交(GISH)分析

    Institute of Scientific and Technical Information of China (English)

    向素琼; 梁国鲁; 李晓林; 汪卫星; 郭启高; 何桥; 陈瑶

    2008-01-01

    [目的]沙田柚是中国特有的柚类名优品种,但种子多,一般100粒左右.为创新三倍体无核品种积累育种材料,本研究通过实生筛选获得不同倍性沙田柚新种质,同时运用基因组原位杂交(GISH)技术分析天然与人工四倍体新种质的染色体组组成.[方法]随机采集沙田柚自然授粉果实,萌发种子检测其染色体数目获得倍性变异植株;以2x母株gDNA为探针,同获得的4x植株中期染色体杂交进行GISH分析.[结果]从6 000粒沙田柚种子中共获得三倍体5株,四倍体9株;对沙田柚天然与人工四倍体新种质的基因组原位杂交(GISH)分析表明,天然四倍体中有7株为异源四倍体,2株为同源四倍体,秋水仙碱诱导获得的人工四倍体4株均为同源四倍体;初步观察显示;与二倍体相比,四倍体植株生长缓慢,树冠较小,枝短而密生,叶片浓绿,宽度变宽,叶形指数减小,叶片厚度增加明显.[结论]多倍体单胚柚新种质的获得为进一步选育无核品种奠定了基础,同时GISH分析证实了沙田柚雌性未减数配子的存在.

  12. Highly transparent, low-haze, hybrid cellulose nanopaper as electrodes for flexible electronics

    Science.gov (United States)

    Xu, Xuezhu; Zhou, Jian; Jiang, Long; Lubineau, Gilles; Ng, Tienkhee; Ooi, Boon S.; Liao, Hsien-Yu; Shen, Chao; Chen, Long; Zhu, J. Y.

    2016-06-01

    Paper is an excellent candidate to replace plastics as a substrate for flexible electronics due to its low cost, renewability and flexibility. Cellulose nanopaper (CNP), a new type of paper made of nanosized cellulose fibers, is a promising substrate material for transparent and flexible electrodes due to its potentially high transparency and high mechanical strength. Although CNP substrates can achieve high transparency, they are still characterized by high diffuse transmittance and small direct transmittance, resulting in high optical haze of the substrates. In this study, we proposed a simple methodology for large-scale production of high-transparency, low-haze CNP comprising both long cellulose nanofibrils (CNFs) and short cellulose nanocrystals (CNCs). By varying the CNC/CNF ratio in the hybrid CNP, we could tailor its total transmittance, direct transmittance and diffuse transmittance. By increasing the CNC content, the optical haze of the hybrid CNP could be decreased and its transparency could be increased. The direct transmittance and optical haze of the CNP were 75.1% and 10.0%, respectively, greatly improved from the values of previously reported CNP (31.1% and 62.0%, respectively). Transparent, flexible electrodes were fabricated by coating the hybrid CNP with silver nanowires (AgNWs). The electrodes showed a low sheet resistance (minimum 1.2 Ω sq-1) and a high total transmittance (maximum of 82.5%). The electrodes were used to make a light emitting diode (LED) assembly to demonstrate their potential use in flexible displays.Paper is an excellent candidate to replace plastics as a substrate for flexible electronics due to its low cost, renewability and flexibility. Cellulose nanopaper (CNP), a new type of paper made of nanosized cellulose fibers, is a promising substrate material for transparent and flexible electrodes due to its potentially high transparency and high mechanical strength. Although CNP substrates can achieve high transparency, they are

  13. Single electron tunneling in large scale nanojunction arrays with bisferrocene-nanoparticle hybrids

    Science.gov (United States)

    Karmakar, Shilpi; Kumar, Susmit; Marzo, Pasquale; Primiceri, Elisabetta; di Corato, Riccardo; Rinaldi, Ross; Cozzi, Pier Giorgio; Bramanti, Alessandro Paolo; Maruccio, Giuseppe

    2012-03-01

    We report on the fabrication and single electron tunneling behaviour of large scale arrays of nanogap electrodes bridged by bisferrocene-gold nanoparticle hybrids (BFc-AuNP). Coulomb staircase was observed in the low temperature current-voltage curves measured on the junctions with asymmetric tunnel barriers. On the other hand, junctions with symmetric tunneling barrier exhibited mere nonlinear current voltage characteristics without discrete staircase. The experimental results agreed well with simulations based on the orthodox theory. The junction resistance showed thermally activated conduction behaviour at higher temperature. The overall voltage and temperature dependent results show that the transport behaviour of the large arrays of single particle devices obtained by a facile optical lithography and chemical etching process corresponds with the behaviour of single particle devices fabricated by other techniques like e-beam lithography and mechanical breaking methods.We report on the fabrication and single electron tunneling behaviour of large scale arrays of nanogap electrodes bridged by bisferrocene-gold nanoparticle hybrids (BFc-AuNP). Coulomb staircase was observed in the low temperature current-voltage curves measured on the junctions with asymmetric tunnel barriers. On the other hand, junctions with symmetric tunneling barrier exhibited mere nonlinear current voltage characteristics without discrete staircase. The experimental results agreed well with simulations based on the orthodox theory. The junction resistance showed thermally activated conduction behaviour at higher temperature. The overall voltage and temperature dependent results show that the transport behaviour of the large arrays of single particle devices obtained by a facile optical lithography and chemical etching process corresponds with the behaviour of single particle devices fabricated by other techniques like e-beam lithography and mechanical breaking methods. Electronic supplementary

  14. Contribution of interlayer hybridization to the electronic structure in iron pnictides: a study of EELS and first-principles calculations.

    Science.gov (United States)

    Ma, Chao; Yang, Huaixin; Tian, Huanfang; Shi, Honglong; Wang, Zhiwei; Li, Jianqi

    2013-03-20

    Using electron energy loss spectroscopy (EELS) measurements and first-principles electronic structure calculations, the significant interlayer hybridization between the insulating layers (ReO or Ba) and the conducting FeAs layers was investigated in the layered iron pnictides, which is quite different from the case in the cuprate superconductors. This interlayer hybridization would result in an increase in the bandwidth near the Fermi level and interorbital charge transfer in the Fe 3d orbitals, which subsequently leads to a decrease in the Fe local moment and the modification of the Fermi surface topology. Therefore, a three-dimensional character of the electronic structure due to the interlayer hybridization is expected, as observed in previous experiments. These findings indicate that reduced dimensionality is no longer a necessary condition in the search for high-T(c) superconductors in iron pnictides.

  15. Single-Particle Cryo-EM and 3D Reconstruction of Hybrid Nanoparticles with Electron-Dense Components.

    Science.gov (United States)

    Yu, Guimei; Yan, Rui; Zhang, Chuan; Mao, Chengde; Jiang, Wen

    2015-10-01

    Single-particle cryo-electron microscopy (cryo-EM), accompanied with 3D reconstruction, is a broadly applicable tool for the structural characterization of macromolecules and nanoparticles. Recently, the cryo-EM field has pushed the limits of this technique to higher resolutions and samples of smaller molecular mass, however, some samples still present hurdles to this technique. Hybrid particles with electron-dense components, which have been studied using single-particle cryo-EM yet with limited success in 3D reconstruction due to the interference caused by electron-dense elements, constitute one group of such challenging samples. To process such hybrid particles, a masking method is developed in this work to adaptively remove pixels arising from electron-dense portions in individual projection images while maintaining maximal biomass signals for subsequent 2D alignment, 3D reconstruction, and iterative refinements. As demonstrated by the success in 3D reconstruction of an octahedron DNA/gold hybrid particle, which has been previously published without a 3D reconstruction, the devised strategy that combines adaptive masking and standard single-particle 3D reconstruction approach has overcome the hurdle of electron-dense elements interference, and is generally applicable to cryo-EM structural characterization of most, if not all, hybrid nanomaterials with electron-dense components.

  16. Electronic band structure effects in monolayer, bilayer, and hybrid graphene structures

    Science.gov (United States)

    Puls, Conor

    Since its discovery in 2005, graphene has been the focus of intense theoretical and experimental study owing to its unique two-dimensional band structure and related electronic properties. In this thesis, we explore the electronic properties of graphene structures from several perspectives including the magnetoelectrical transport properties of monolayer graphene, gap engineering and measurements in bilayer graphene, and anomalous quantum oscillation in the monolayer-bilayer graphene hybrids. We also explored the device implications of our findings, and the application of some experimental techniques developed for the graphene work to the study of a complex oxide, Ca3Ru2O7, exhibiting properties of strongly correlated electrons. Graphene's high mobility and ballistic transport over device length scales, make it suitable for numerous applications. However, two big challenges remain in the way: maintaining high mobility in fabricated devices, and engineering a band gap to make graphene compatible with logical electronics and various optical devices. We address the first challenge by experimentally evaluating mobilities in scalable monolayer graphene-based field effect transistors (FETs) and dielectric-covered Hall bars. We find that the mobility is limited in these devices, and is roughly inversely proportional to doping. By considering interaction of graphene's Dirac fermions with local charged impurities at the interface between graphene and the top-gate dielectric, we find that Coulomb scattering is responsible for degraded mobility. Even in the cleanest devices, a band gap is still desirable for electronic applications of graphene. We address this challenge by probing the band structure of bilayer graphene, in which a field-tunable energy band gap has been theoretically proposed. We use planar tunneling spectroscopy of exfoliated bilayer graphene flakes demonstrate both measurement and control of the energy band gap. We find that both the Fermi level and

  17. Stability of hybrid modes of a single-component electron plasma containing an admixture of background gas ions

    Science.gov (United States)

    Yeliseyev, Yu. N.

    2014-05-01

    The spectrum of eigenmodes of a waveguide completely filled with a cold electron plasma containing a small admixture of ions produced due to electron-impact ionization of background gas atoms is calculated numerically. The calculations were performed within the entire range of allowable values of the radial electric and longitudinal magnetic fields for both magnetized and unmagnetized ions by using the earlier derived nonlocal dispersion relation [Plasma Phys. Rep. 36, 563 (2010)]. The spectrum consists of three families of electron modes with frequencies equal to the Doppler-shifted upper and lower hybrid frequencies and modified ion cyclotron (MIC) modes. When the Doppler shift caused by electron rotation in the crossed electric and magnetic fields compensates for the hybrid frequency, the electron modes become low-frequency modes and interact with the ion modes. For m = 1, only the lower hybrid modes can be low-frequency ones, whereas at m ≥ 2, both lower and upper hybrid modes can be low-frequency ones. The spectrum of modes having the azimuthal number m = 2 is thoroughly analyzed. It is shown that, in this case, the lower hybrid modes behave similar to the m = 1 modes. The dispersion curves of the upper hybrid modes intersect with all harmonics of the MIC frequency (positive, negative, and zero) and are unstable in the vicinities of the intersections. The maximum value of the instability growth rate is several times higher than the ion plasma frequency. The MIC modes are unstable within a wide range of the field strengths, and their growth rates are two orders of magnitude slower. Instabilities are caused by the relative motion of electrons and ions (the transverse current) and the anisotropy of the ion distribution function.

  18. Donor–acceptor graphene-based hybrid materials facilitating photo-induced electron-transfer reactions

    Directory of Open Access Journals (Sweden)

    Anastasios Stergiou

    2014-09-01

    Full Text Available Graphene research and in particular the topic of chemical functionalization of graphene has exploded in the last decade. The main aim is to increase the solubility and thereby enhance the processability of the material, which is otherwise insoluble and inapplicable for technological applications when stacked in the form of graphite. To this end, initially, graphite was oxidized under harsh conditions to yield exfoliated graphene oxide sheets that are soluble in aqueous media and amenable to chemical modifications due to the presence of carboxylic acid groups at the edges of the lattice. However, it was obvious that the high-defect framework of graphene oxide cannot be readily utilized in applications that are governed by charge-transfer processes, for example, in solar cells. Alternatively, exfoliated graphene has been applied toward the realization of some donor–acceptor hybrid materials with photo- and/or electro-active components. The main body of research regarding obtaining donor–acceptor hybrid materials based on graphene to facilitate charge-transfer phenomena, which is reviewed here, concerns the incorporation of porphyrins and phthalocyanines onto graphene sheets. Through illustrative schemes, the preparation and most importantly the photophysical properties of such graphene-based ensembles will be described. Important parameters, such as the generation of the charge-separated state upon photoexcitation of the organic electron donor, the lifetimes of the charge-separation and charge-recombination as well as the incident-photon-to-current efficiency value for some donor–acceptor graphene-based hybrids, will be discussed.

  19. Highly transparent, low-haze, hybrid cellulose nanopaper as electrodes for flexible electronics

    KAUST Repository

    Xu, Xuezhu

    2016-06-01

    Paper is an excellent candidate to replace plastics as a substrate for flexible electronics due to its low cost, renewability and flexibility. Cellulose nanopaper (CNP), a new type of paper made of nanosized cellulose fibers, is a promising substrate material for transparent and flexible electrodes due to its potentially high transparency and high mechanical strength. Although CNP substrates can achieve high transparency, they are still characterized by high diffuse transmittance and small direct transmittance, resulting in high optical haze of the substrates. In this study, we proposed a simple methodology for large-scale production of high-transparency, low-haze CNP comprising both long cellulose nanofibrils (CNFs) and short cellulose nanocrystals (CNCs). By varying the CNC/CNF ratio in the hybrid CNP, we could tailor its total transmittance, direct transmittance and diffuse transmittance. By increasing the CNC content, the optical haze of the hybrid CNP could be decreased and its transparency could be increased. The direct transmittance and optical haze of the CNP were 75.1% and 10.0%, respectively, greatly improved from the values of previously reported CNP (31.1% and 62.0%, respectively). Transparent, flexible electrodes were fabricated by coating the hybrid CNP with silver nanowires (AgNWs). The electrodes showed a low sheet resistance (minimum 1.2 Ω sq-1) and a high total transmittance (maximum of 82.5%). The electrodes were used to make a light emitting diode (LED) assembly to demonstrate their potential use in flexible displays. © 2016 The Royal Society of Chemistry.

  20. Making hybrid [n]-rotaxanes as supramolecular arrays of molecular electron spin qubits

    Science.gov (United States)

    Fernandez, Antonio; Ferrando-Soria, Jesus; Pineda, Eufemio Moreno; Tuna, Floriana; Vitorica-Yrezabal, Iñigo J.; Knappke, Christiane; Ujma, Jakub; Muryn, Christopher A.; Timco, Grigore A.; Barran, Perdita E.; Ardavan, Arzhang; Winpenny, Richard E. P.

    2016-01-01

    Quantum information processing (QIP) would require that the individual units involved--qubits--communicate to other qubits while retaining their identity. In many ways this resembles the way supramolecular chemistry brings together individual molecules into interlocked structures, where the assembly has one identity but where the individual components are still recognizable. Here a fully modular supramolecular strategy has been to link hybrid organic-inorganic [2]- and [3]-rotaxanes into still larger [4]-, [5]- and [7]-rotaxanes. The ring components are heterometallic octanuclear [Cr7NiF8(O2CtBu)16]- coordination cages and the thread components template the formation of the ring about the organic axle, and are further functionalized to act as a ligand, which leads to large supramolecular arrays of these heterometallic rings. As the rings have been proposed as qubits for QIP, the strategy provides a possible route towards scalable molecular electron spin devices for QIP. Double electron-electron resonance experiments demonstrate inter-qubit interactions suitable for mediating two-qubit quantum logic gates.

  1. Enhancing Intrinsic Stability of Hybrid Perovskite Solar Cell by Strong, yet Balanced, Electronic Coupling

    Science.gov (United States)

    El-Mellouhi, Fedwa; Bentria, El Tayeb; Rashkeev, Sergey N.; Kais, Sabre; Alharbi, Fahhad H.

    2016-07-01

    In the past few years, the meteoric development of hybrid organic–inorganic perovskite solar cells (PSC) astonished the community. The efficiency has already reached the level needed for commercialization; however, the instability hinders its deployment on the market. Here, we report a mechanism to chemically stabilize PSC absorbers. We propose to replace the widely used methylammonium cation (CH3NH3+) by alternative molecular cations allowing an enhanced electronic coupling between the cation and the PbI6 octahedra while maintaining the band gap energy within the suitable range for solar cells. The mechanism exploits establishing a balance between the electronegativity of the materials’ constituents and the resulting ionic electrostatic interactions. The calculations demonstrate the concept of enhancing the electronic coupling, and hence the stability, by exploring the stabilizing features of CH3PH3+, CH3SH2+, and SH3+ cations, among several other possible candidates. Chemical stability enhancement hence results from a strong, yet balanced, electronic coupling between the cation and the halides in the octahedron. This shall unlock the hindering instability problem for PSCs and allow them to hit the market as a serious low-cost competitor to silicon based solar cell technologies.

  2. Enhancing Intrinsic Stability of Hybrid Perovskite Solar Cell by Strong, yet Balanced, Electronic Coupling

    Science.gov (United States)

    El-Mellouhi, Fedwa; Bentria, El Tayeb; Rashkeev, Sergey N.; Kais, Sabre; Alharbi, Fahhad H.

    2016-01-01

    In the past few years, the meteoric development of hybrid organic–inorganic perovskite solar cells (PSC) astonished the community. The efficiency has already reached the level needed for commercialization; however, the instability hinders its deployment on the market. Here, we report a mechanism to chemically stabilize PSC absorbers. We propose to replace the widely used methylammonium cation (CH3NH3+) by alternative molecular cations allowing an enhanced electronic coupling between the cation and the PbI6 octahedra while maintaining the band gap energy within the suitable range for solar cells. The mechanism exploits establishing a balance between the electronegativity of the materials’ constituents and the resulting ionic electrostatic interactions. The calculations demonstrate the concept of enhancing the electronic coupling, and hence the stability, by exploring the stabilizing features of CH3PH3+, CH3SH2+, and SH3+ cations, among several other possible candidates. Chemical stability enhancement hence results from a strong, yet balanced, electronic coupling between the cation and the halides in the octahedron. This shall unlock the hindering instability problem for PSCs and allow them to hit the market as a serious low-cost competitor to silicon based solar cell technologies. PMID:27457130

  3. Design guidelines for use of adhesives in hybrid microcircuits. [for electronic equipment in space applications

    Science.gov (United States)

    Caruso, S. V.; Perkins, K. L.; Licari, J. J.

    1973-01-01

    Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

  4. Electron beam energy stabilization using a neural network hybrid controller at the Australian Synchrotron Linac.

    Energy Technology Data Exchange (ETDEWEB)

    Meier, E.; Morgan, M. J.; Biedron, S. G.; LeBlanc, G.; Wu, J. (OTD-ESE); (Monash Univ.); (Australian Synchrotron Project); (SLAC National Accelerator Lab.)

    2009-01-01

    This paper describes the implementation of a neural network hybrid controller for energy stabilization at the Australian Synchrotron Linac. The structure of the controller consists of a neural network (NNET) feed forward control, augmented by a conventional Proportional-Integral (PI) feedback controller to ensure stability of the system. The system is provided with past states of the machine in order to predict its future state, and therefore apply appropriate feed forward control. The NNET is able to cancel multiple frequency jitter in real-time. When it is not performing optimally due to jitter changes, the system can successfully be augmented by the PI controller to attenuate the remaining perturbations. With a view to control the energy and bunch length at the FERMI{at}Elettra Free Electron Laser (FEL), the present study considers a neural network hybrid feed forward-feedback type of control to rectify limitations related to feedback systems, such as poor response for high jitter frequencies or limited bandwidth, while ensuring robustness of control. The Australian Synchrotron Linac is equipped with a beam position monitor (BPM), that was provided by Sincrotrone Trieste from a former transport line thus allowing energy measurements and energy control experiments. The present study will consequently focus on correcting energy jitter induced by variations in klystron phase and voltage.

  5. Power sources for portable electronics and hybrid cars: lithium batteries and fuel cells.

    Science.gov (United States)

    Scrosati, Bruno

    2005-01-01

    The activities in progress in our laboratory for the development of batteries and fuel cells for portable electronics and hybrid car applications are reviewed and discussed. In the case of lithium batteries, the research has been mainly focused on the characterization of new electrode and electrolyte materials. Results related to disordered carbon anodes and improved, solvent-free, as well as gel-type, polymer electrolytes are particularly stressed. It is shown that the use of proper gel electrolytes, in combination with suitable electrode couples, allows the development of new types of safe, reliable, and low-cost lithium ion batteries which appear to be very promising power sources for hybrid vehicles. Some of the technologies proven to be successful in the lithium battery area are readapted for use in fuel cells. In particular, this approach has been followed for the preparation of low-cost and stable protonic membranes to be proposed as an alternative to the expensive, perfluorosulfonic membranes presently used in polymer electrolyte membrane fuel cells (PEMFCs). Copyright 2005 The Japan Chemical Journal Forum and Wiley Periodicals, Inc

  6. 3D hybrid simulations with gyrokinetic particle ions and fluid electrons

    Energy Technology Data Exchange (ETDEWEB)

    Belova, E.V.; Park, W.; Fu, G.Y. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Strauss, H.R. [New York Univ., NY (United States); Sugiyama, L.E. [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1998-12-31

    The previous hybrid MHD/particle model (MH3D-K code) represented energetic ions as gyrokinetic (or drift-kinetic) particles coupled to MHD equations using the pressure or current coupling scheme. A small energetic to bulk ion density ratio was assumed, n{sub h}/n{sub b} {much_lt} 1, allowing the neglect of the energetic ion perpendicular inertia in the momentum equation and the use of MHD Ohm`s law E = {minus}v{sub b} {times} B. A generalization of this model in which all ions are treated as gyrokinetic/drift-kinetic particles and fluid description is used for the electron dynamics is considered in this paper.

  7. More stable hybrid organic solar cells deposited on amorphous Si electron transfer layer

    Energy Technology Data Exchange (ETDEWEB)

    Samiee, Mehran; Modtland, Brian; Dalal, Vikram L., E-mail: vdalal@iastate.edu [Iowa State University, Dept. of Electrical and Computer Engineering, Ames, Iowa 50011 (United States); Aidarkhanov, Damir [Nazarbayev University, Astana (Kazakhstan)

    2014-05-26

    We report on defect densities, performance, and stability of organic/inorganic hybrid solar cells produced using n-doped inorganic amorphous silicon-carbide layers as the electron transport layer (ETL). The organic material was poly-3-hexyl-thiophene (P3HT) and heterojunction was formed using phenyl-C{sub 71}-Butyric-Acid-Methyl Ester (PCBM). For comparison, inverted solar cells fabricated using Cs{sub 2}CO{sub 3} as ETL were fabricated. Defect densities and subgap quantum efficiency curves were found to be nearly identical for both types of cells. The cells were subjected to 2xsun illumination and it was found that the cells produced using doped a-Si as ETL were much more stable than the cells produced using Cs{sub 2}CO{sub 3}.

  8. The Detection of Defects in Optical Fibers Using a Hybrid Opto-electronic Correlator

    Institute of Scientific and Technical Information of China (English)

    LIU Yange; LIU Wei; ZHANG Yimo; ZHOU Ge

    2000-01-01

    A hybrid opto-electronic correlator for detecting defects in optical fibers is proposed. After the light from a He-Ne laser being expanded and filtered it is not collimated but directly passes a Fourier transform lens and illuminates a reference fiber and a test fiber at the same input plane. The Fourier transform spectrum of the two fibers is therefore obtained at the rear focal plane of the lens, where it is sampled via a CCD array connected with a computer through a frame grabber. The computer performs filter, inverse Fourier transform and setting threshold operation on classification. The system is an equivalent of joint transform correlator with a Fourier lens of long focal length. The experiment results for optical fibers having incoordinate defects are presented. The results indicate that the system can be used for fiber defect detection, and has the advantages of high identification, compact configuration, easy adjustment and flexible manipulation.

  9. Cross-Linkable and Dual Functional Hybrid Polymeric Electron Transporting Layer for High-Performance Inverted Polymer Solar Cells.

    Science.gov (United States)

    Dong, Sheng; Hu, Zhicheng; Zhang, Kai; Yin, Qingwu; Jiang, Xiaofang; Huang, Fei; Cao, Yong

    2017-06-20

    A cross-linkable dual functional polymer hybrid electron transport layer (ETL) is developed by simply adding an amino-functionalized polymer dopant (PN4N) and a light crosslinker into a commercialized n-type semiconductor (N2200) matrix. It is found that the resulting hybrid ETL not only has a good solvent resistance, facilitating multilayers device fabrication but also exhibits much improved electron transporting/extraction properties due to the doping between PN4N and N2200. As a result, by using PTB7-Th:PC71 BM blend as an active layer, the inverted device based on the hybrid ETL can yield a prominent power conversion efficiency of around 10.07%. More interestingly, photovoltaic property studies of bilayer devices suggest that the absorption of the hybrid ETL contributes to photocurrent and hence the hybrid ETL simultaneously acts as both cathode interlayer material and an electron acceptor. The resulting inverted polymer solar cells function like a novel device architectures with a combination of a bulk heterojunction device and miniature bilayer devices. This work provides new insights on function of ETLs and may be open up a new direction for the design of new ETL materials and novel device architectures to further improve device performance. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Analysis of Upper Hybrid Wave Growth Rates From Measured Electron Distributions; An Encounter With the Source of Auroral Roar

    Science.gov (United States)

    Bounds, S. R.; Kletzing, C. A.; Labelle, J. W.; Samara, M.; Yoon, P. H.

    2005-12-01

    In January of 2003, the High Bandwidth Auroral Rocket (HIBAR) passed through two regions of strong upper hybrid wave emission associated with the approximate matching of the upper hybrid frequency to twice the electron cyclotron frequency (fuh = 2 fce) (Samara 2004) These types of emission are believed to be the source of the HF auroral roar often observed by ground based receivers. The current model theorizes that the free space 0-mode waves observed on the ground are produced through mode conversion of strong emission of Z-mode, or upper hybrid waves. The relativistic electron cyclotron maser exhibits significant growth rates for the Z-mode when the local upper hybrid frequency is just below (~1%) twice the electron cyclotron frequency and with the appropriately unstable electron distribution (Yoon 1996, Yoon 1998, Yoon 2000). Though auroral roar is frequently observed from the ground, the source region has rarely been identified in-situ and even more rarely with sufficient bandwidth to analyze the underlying physical processes. Analysis of the electron distributions from HIBAR show good agreement with the theoretical distributions used by Yoon:98. HIBAR encountered three separate regions where fuh ≍ 2 fce, two of these regions include strong upper hybrid emission, while the third is void of upper hybrid wave activity. The measured particle distributions demonstrate that, in the two regions with wave emission, the relativistic electron cyclotron maser instability produces Z mode wave growth rates at least an order of magnitude greater than the electron collision frequency. In the third region without wave emission, the growth rates are much smaller in both amplitude and the extent of occurance. Samara, M., J. LaBelle, C. A. Kletzing, and S. R. Bounds, Rocket observations of structured upper hybrid wave at fuh=2fce, Geophys. Res. Lett., 31, L22804, doi:10.1029/2004GL021043. Yoon, P. H., A. T. Weatherwax, and T. J. Rosenberg, Lower ionospheric cyclotron maser

  11. Electronic and vibrational properties of transition metal-oxides: Comparison of GGA, GGA + U, and hybrid approaches

    Science.gov (United States)

    Pandey, Sumeet C.; Xu, Xu; Williamson, Izaak; Nelson, Eric B.; Li, Lan

    2017-02-01

    We estimate the Hubbard parameters for density-functional-theory (DFT) + U calculations of ZrO2, HfO2, TiO2, and NiO based on calibrating the electronic structure obtained from hybrid functional methods. The electronic density of states is used to assess the parameters and the values thus derived are employed for the full electron and phonon dispersion comparisons. The resulting values account for experimental band gaps and electron correlations that are computationally much less demanding to treat within the simpler DFT + U framework than with the typically more accurate yet expensive hybrid functional methods. Limitations of +U scheme is indicated towards describing TiO2 and HfO2 phase-stability.

  12. Hybrid nanowire ion-to-electron transducers for integrated bioelectronic circuitry (Conference Presentation)

    Science.gov (United States)

    Carrad, Damon J.; Mostert, Bernard; Meredith, Paul; Micolich, Adam P.

    2016-09-01

    A key task in bioelectronics is the transduction between ionic/protonic signals and electronic signals at high fidelity. This is a considerable challenge since the two carrier types exhibit intrinsically different physics. We present our work on a new class of organic-inorganic transducing interface utilising semiconducting InAs and GaAs nanowires directly gated with a proton transporting hygroscopic polymer consisting of undoped polyethylene oxide (PEO) patterned to nanoscale dimensions by a newly developed electron-beam lithography process [1]. Remarkably, we find our undoped PEO polymer electrolyte gate dielectric [2] gives equivalent electrical performance to the more traditionally used LiClO4-doped PEO [3], with an ionic conductivity three orders of magnitude higher than previously reported for undoped PEO [4]. The observed behaviour is consistent with proton conduction in PEO. We attribute our undoped PEO-based devices' performance to the small external surface and high surface-to-volume ratio of both the nanowire conducting channel and patterned PEO dielectric in our devices, as well as the enhanced hydration afforded by device processing and atmospheric conditions. In addition to studying the basic transducing mechanisms, we also demonstrate high-fidelity ionic to electronic conversion of a.c. signals at frequencies up to 50 Hz. Moreover, by combining complementary n- and p-type transducers we demonstrate functional hybrid ionic-electronic circuits can achieve logic (NOT operation), and with some further engineering of the nanowire contacts, potentially also amplification. Our device structures have significant potential to be scaled towards realising integrated bioelectronic circuitry. [1] D.J. Carrad et al., Nano Letters 14, 94 (2014). [2] D.J. Carrad et al., Manuscript in preparation (2016). [3] S.H. Kim et al., Advanced Materials 25, 1822 (2013). [4] S.K. Fullerton-Shirey et al., Macromolecules 42, 2142 (2009).

  13. DISTRIBUTION OF VEGF mRNA IN BREAST CANCER WITH NONRADIOACTIVE IN SITU HYBRIDIZATION AT ELECTRON MICROSCOPIC LEVELS

    Institute of Scientific and Technical Information of China (English)

    王医术; 林; 王心蕊; 李一雷; 吴珊; 张丽红

    2002-01-01

    Object: To localize the mRNA coding for VEGF at Ultrastractural level in human breast cancer by using digoxigenin-labeled cDNA probes. Methods: Nonradio- active in situ hybridization at electron microscopic level was employed to detected VEGF mRNA in breast cancer. Result: Cancer cells and endothelial cell of angiogensis show dark color in experiment sections. No dark color can be found in control sections. Positive hybridization signals showed dark dot and were locatedin various compartments of the breast cancer cell and endothelial cell in experiment section. No labeling was observed in control sections. In experiment sections, the staining appeared concentrated in cytoplasm and nucleus of the breast cancer cell and endothelial cell. Conclusion: Nonradioactive in situ hybridization at electron microscopic level is efficient for direct observation of the target site mRNA of VEGF in the cytoplasm and nucleus.

  14. Envelope Soliton in Multi-ion Plasma and Ion-Ion Hybrid Wave Excited by Energetic Electron Beam

    Institute of Scientific and Technical Information of China (English)

    WANG De-Yu; HUANG Guang-Li

    2001-01-01

    Another envelope soliton event below the H+ gyrofrequency and localized density depletion has been discoveredin the low auroral region (~1760 kin) by the Freja satellite. This envelope soliton has a characteristic frequencyat ~190 Hz, which is also close to the resonance frequency of hydrogen ion-oxygen ion hybrid wave. This event iscorrelated in time with the observations of the sharp increase of the ratio of oxygen ion density to hydrogen andwith the electron energization along the magnetic field. A theoretical model on the ion-ion hybrid wave excitedby an energetic electron beam has also been presented. It is found that the ion-ion hybrid wave is mainly excitedby the Cherenkov instability in the auroral region.

  15. Hybrid exchange-correlation functional for accurate prediction of the electronic and structural properties of ferroelectric oxides

    OpenAIRE

    D., I. Bilc; R., Orlando; R., Shaltaf; G., M. Rignanese; J., Íñiguez; Ph., Ghosez

    2008-01-01

    Using a linear combination of atomic orbitals approach, we report a systematic comparison of various Density Functional Theory (DFT) and hybrid exchange-correlation functionals for the prediction of the electronic and structural properties of prototypical ferroelectric oxides. It is found that none of the available functionals is able to provide, at the same time, accurate electronic and structural properties of the cubic and tetragonal phases of BaTiO$_3$ and PbTiO$_3$. Some, although not al...

  16. A segmented Hybrid Photon Detector with integrated auto-triggering front-end electronics for a PET scanner

    CERN Document Server

    Chesi, Enrico Guido; Joram, C; Mathot, S; Séguinot, Jacques; Weilhammer, P; Ciocia, F; De Leo, R; Nappi, E; Vilardi, I; Argentieri, A; Corsi, F; Dragone, A; Pasqua, D

    2006-01-01

    We describe the design, fabrication and test results of a segmented Hybrid Photon Detector with integrated auto-triggering front-end electronics. Both the photodetector and its VLSI readout electronics are custom designed and have been tailored to the requirements of a recently proposed novel geometrical concept of a Positron Emission Tomograph. Emphasis is put on the PET specific features of the device. The detector has been fabricated in the photocathode facility at CERN.

  17. Magnon, phonon, and electron temperature profiles and the spin Seebeck effect in magnetic insulator/normal metal hybrid structures

    NARCIS (Netherlands)

    Schreier, M.; Kamra, A.; Weiler, M.; Xiao, J.; Bauer, G.E.W.; Gross, R.; Goennenwein, S.T.B.

    2013-01-01

    We calculate the phonon, electron, and magnon temperature profiles in yttrium iron garnet/platinum bilayers by diffusive theory with appropriate boundary conditions, in particular taking into account interfacial thermal resistances. Our calculations show that in thin film hybrids, the interface magn

  18. N-type polymers as electron extraction layers in hybrid perovskite solar cells with improved ambient stability

    NARCIS (Netherlands)

    Shao, S.; Chen, Z.; Fang, H. -H.; ten Brink, G. H.; Bartesaghi, D.; Adjokatse, S.; Koster, L. J. A.; Kooi, B. J.; Facchetti, A.; Loi, M. A.

    2016-01-01

    We studied three n-type polymers of the naphthalenediimide-bithiophene family as electron extraction layers (EELs) in hybrid perovskite solar cells. The recombination mechanism in these devices is found to be heavily influenced by the EEL transport properties. The maximum efficiency of the devices u

  19. Scanning electron microscopy and fluorescent in situ hybridization of experimental Brachyspira (Serpulina) pilosicoli infection in growing pigs

    DEFF Research Database (Denmark)

    Jensen, Tim Kåre; Møller, Kristian; Boye, Mette

    2000-01-01

    Two groups of six 8-week-old pigs were challenged with 1X10(9) cfu Brachyspira (Serpulina) pilosicoli or Serpulina intermedia daily for 3 consecutive days to study the pathology of porcine colonic spirochetosis by scanning electron microscopy (SEM) and fluorescent in situ hybridization (FISH...

  20. The extent and position of homoeologous recombination in a distant hybrid of Alstroemeria: a molecular cytogenetic assessment of first generation backcross progenies.

    Science.gov (United States)

    Kamstra, S A; Kuipers, A G; De Jeu, M J; Ramanna, M S; Jacobsen, E

    1999-04-01

    To estimate the extent and position of homoeologous recombination during meiosis in an interspecific hybrid between two distantly related Alstroemeria species, the chromosome constitution of six first generation backcross (BC1) plants was analysed using sequential fluorescent in situ hybridization (FISH) and genomic in situ hybridization (GISH) analysis. Four different probes were used for the FISH analysis: two species-specific and two rDNA probes. The six BC1 plants were obtained from crosses between the hybrid A. aurea x A. inodora with its parent A. inodora. GISH clearly identified all chromosomes of both parental genomes as well as recombinant chromosomes. The sequential GISH and FISH analysis enabled the accurate identification of all individual chromosomes in the BC1 plants, resulting in the construction of detailed karyotypes of the plants. The identification of the recombinant chromosomes provided evidence which chromosomes of the two species are homoeologous. Two of the BC1 plants were aneuploid (2n=2x+1=17) and four triploid (2n=3x=24), indicating that both n and 2n gametes were functional in the F1 hybrid. Using GISH, it was possible to estimate homeologous recombination in two different types of gametes in the F1 hyrid. The positions of the crossover points ranged from highly proximal to distal and the maximum number of crossover points per chromosome arm was three. Compared with the aneuploid plants, the triploid plants (which received 2n gametes) clearly possessed fewer crossovers per chromosome, indicating reduced chromosome pairing/recombination prior to the formation of the 2n gametes. Besides homeologous recombination, evidence was found for the presence of structural rearrangements (inversion and translocation) between the chromosomes of the parental species. The presence of the ancient translocation was confirmed through FISH analysis of mitotic and meiotic chromosomes.

  1. Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, and supercapacitors.

    Science.gov (United States)

    Wen, Zhen; Yeh, Min-Hsin; Guo, Hengyu; Wang, Jie; Zi, Yunlong; Xu, Weidong; Deng, Jianan; Zhu, Lei; Wang, Xin; Hu, Chenguo; Zhu, Liping; Sun, Xuhui; Wang, Zhong Lin

    2016-10-01

    Wearable electronics fabricated on lightweight and flexible substrate are believed to have great potential for portable devices, but their applications are limited by the life span of their batteries. We propose a hybridized self-charging power textile system with the aim of simultaneously collecting outdoor sunshine and random body motion energies and then storing them in an energy storage unit. Both of the harvested energies can be easily converted into electricity by using fiber-shaped dye-sensitized solar cells (for solar energy) and fiber-shaped triboelectric nanogenerators (for random body motion energy) and then further stored as chemical energy in fiber-shaped supercapacitors. Because of the all-fiber-shaped structure of the entire system, our proposed hybridized self-charging textile system can be easily woven into electronic textiles to fabricate smart clothes to sustainably operate mobile or wearable electronics.

  2. Transfer of small chromosome fragments of Agropyron elongatum to wheat chromosome via asymmetric somatic hybridization

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    The chromosome constitution of hybrids and chromatin patterns of Agropyron elongatum(Host)Neviski in F5 somatic hybrid lines Ⅱ -1-3 and I-1-9 between Triticum aestivum L.and A.Elongatum were analyzed.Based on the statistic data of pollen mother cells,F5 I-1-9 and Ⅱ-1-3 had 20-21 bivalents with a frequency of 84.66% and 85.28%,of which,89.83% and 89.57% were ring bivalents.The result indicated that both hybrid lines were basically stable in the chromosome constitution and behavior.RAPD analysis showed that the two hybrids contained biparental and integrated DNA.GISH(Genome in situ hybridization)revealed that in the form of small chromosome segments,A.Elongatum chromatin was scattered on 4-6 wheat chromosomes near by the region of centromere and telomere in the two hybrid lines.SSR analysis indicated that A.Elongatum DNA segments were distributed on the 2A,5B,6B and 2D wheat chromosomes in the hybrids,which was in accordance with the GISH results that small-segments intercalated poly-site.

  3. Organic-inorganic semiconductor hybrid systems. Structure, morphology, and electronic properties

    Energy Technology Data Exchange (ETDEWEB)

    El Helou, Mira

    2012-08-22

    This dissertation addresses the preparation and characterization of hybrid semiconducting systems combining organic with inorganic materials. Characterization methods used included to determine the structure, morphology, and thermal stability comprised X-ray diffraction (XRD), atomic force microscopy (AFM), thermal desorption spectroscopy (TDS), and X-ray photoelectron spectroscopy (XPS). One organic-inorganic semiconducting system was pentacene (C{sub 22}H{sub 14}) and zinc oxide. This interface was investigated in detail for pentacene on an oxygen-terminated zinc oxide surface, i.e. ZnO(000 anti 1). An extended study on the promising p-n junction was carried out for pentacene on ZnO with different orientations which exhibit different chemical and structural characteristics: ZnO(000 anti 1), ZnO(0001), and ZnO(10 anti 10). Moreover, the organic crystal structure of pentacene was selectively tuned by carefully choosing the substrate temperature. This defined interface with a physisorbed pentacene layer on ZnO was characterized by optical absorption which depends on the temperature of the measured system, the pentacene film thickness, and the molecular orientation and packing. The high quality of the pentacene films allowed in one case to characterize the Davydov splitting by linear polarized light focused on a single crystallite. Another subject in the field of organic-inorganic hybrid materials comprised conjugated dithiols used as self-assembled monolayers (SAMs) for immobilizing semiconducting CdS nanoparticles (NPs) on Au substrates. It was demonstrated that an appropriate selection and preparation of the conjugated SAMs is crucial for building up a light-addressable potentiometric sensor with a sufficient efficiency. An optimized electron transfer was achieved with SAMs of long range ordering, high stability, and adequate conductivity. This was examined for different linkers and was best for stilbenedithiol immobilized in solution at higher temperatures. Due

  4. A tapered undulator experiment at the ELBE far infrared hybrid-resonator oscillator free electron laser.

    Science.gov (United States)

    Asgekar, V; Lehnert, U; Michel, P

    2012-01-01

    A tapered undulator experiment was carried out at the ELBE far-infrared free electron laser (FEL). The oscillator FEL makes use of a hybrid optical resonator. The main motivation was to see whether the presence of a dispersive medium in the form of a waveguide in the resonator has any effect on the outcome. The FEL saturated power and the wavelength shifts have been measured as a function of both positive as well as negative undulator field amplitude tapering. In contrast to the typical high-gain FELs where positive tapering proves beneficial for the output power we observed an improvement of performance at negative taper. During the same experiments we studied the characteristics of the detuning curves. The width of the curves indicates a maximum small signal gain for zero taper while the output peak power increases with negative taper. The saturated power output, the detuning curve characteristics, and the wavelength shifts agrees with the theoretical predictions. Details of the experiment are presented.

  5. Characterization by fluorescence and electron microscopy in situ hybridization of a double Y isochromosome

    Energy Technology Data Exchange (ETDEWEB)

    Fetni, R.; Lemieux, N.; Richer, C.L. [Universite de Montreal, Quebec (Canada)] [and others

    1996-06-14

    A patient with mixed gonadal dysgenesis and Y isochromosomes I(Y) is described. Lymphocyte cultures from peripheral blood contained a high proportion of 45,X cells and several other cell lines with two different marker chromosomes (mars). These markers had either a monocentric (mar1) or a dicentric appearance (mar2). Following high-resolution GTG, RBG, QFQ, and CBG bandings, five cell lines were identified; 45,X/46,X, + mar1/46,X, + mar2/47,X, + mar1x2/47,X + mar2x2. The percentages were 66/6/26/1/1%, respectively. Chromosome banding analyses were insufficient for characterization of the markers. In situ hybridization of specific probes for the Y centromere and its short arm showed, both in fluorescence and electron microscopy (ENT), two different Y rearrangements. Mar1 is an isochromosome for the short arm i(Yp) and mar2 is a dicentric which was shown by EM to be a double isochromosome Yp, inv dup i(Yp). The breakpoint producing mar1 is within the centromere and the one producing mar2 is within one of the short arms of the Y isochromosome. The findings of different cell populations in peripheral blood lymphocytes indicate the postzygotic instability of this i(Yp). 24 refs., 3 figs., 1 tab.

  6. Efficient induction of Wheat-agropyron cristatum 6P translocation lines and GISH detection.

    Directory of Open Access Journals (Sweden)

    Liqiang Song

    Full Text Available The narrow genetic background restricts wheat yield and quality improvement. The wild relatives of wheat are the huge gene pools for wheat improvement and can broaden its genetic basis. Production of wheat-alien translocation lines can transfer alien genes to wheat. So it is important to develop an efficient method to induce wheat-alien chromosome translocation. Agropyroncristatum (P genome carries many potential genes beneficial to disease resistance, stress tolerance and high yield. Chromosome 6P possesses the desirable genes exhibiting good agronomic traits, such as high grain number per spike, powdery mildew resistance and stress tolerance. In this study, the wheat-A. cristatum disomic addition was used as bridge material to produce wheat-A. cristatum translocation lines induced by (60Co-γirradiation. The results of genomic in situ hybridization showed that 216 plants contained alien chromosome translocation among 571 self-pollinated progenies. The frequency of translocation was 37.83%, much higher than previous reports. Moreover, various alien translocation types were identified. The analysis of M2 showed that 62.5% of intergeneric translocation lines grew normally without losing the translocated chromosomes. The paper reported a high efficient technical method for inducing alien translocation between wheat and Agropyroncristatum. Additionally, these translocation lines will be valuable for not only basic research on genetic balance, interaction and expression of different chromosome segments of wheat and alien species, but also wheat breeding programs to utilize superior agronomic traits and good compensation effect from alien chromosomes.

  7. Electron field emission characteristics of graphene/carbon nanotubes hybrid field emitter

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Leifeng, E-mail: chlf@hdu.edu.cn [College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018 (China); He, Hong; Yu, Hua; Cao, Yiqi [College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018 (China); Lei, Da, E-mail: leida126@126.com [Ordos College of Inner Mongolia University, Inner Mongolia University, Ordos 017000 (China); Menggen, QiQiGe [Ordos College of Inner Mongolia University, Inner Mongolia University, Ordos 017000 (China); Wu, Chaoxing; Hu, Liqin [College of Physics and Information Engineering, Fuzhou University, Fuzhou 350002 (China)

    2014-10-15

    The graphene (GP) and multi-walled carbon nanotubes (MCNTs) hybrid nanostructure emitter was constructed by a larger scale electrophoretic deposition (EPD) method. The field emission (FE) performance of the hybrid emitter is greatly improved compared with that of only GP or MCNTs emitter. The low turn-on electric field (EF), the low threshold EF and the reliability FE properties are obtained from the hybrid emitter. The better FE properties result from the improved electrical properties. For further enhancement FE of hybrids, Ag Nanoparticles (NPs) were decorated on the hybrids and FE characteristics were also studied. These studies indicate that we can use the hybrid nanostructure to improve conductivity and contact resistance, which results in enhancement of the FE properties.

  8. First Principles Study on the Electronic Structure and Interface Stability of Hybrid Silicene/Fluorosilicene Nanoribbons

    National Research Council Canada - National Science Library

    Jiang, Q G; Zhang, J F; Ao, Z M; Wu, Y P

    2015-01-01

    The interface stability of hybrid silicene/fluorosilicene nanoribbons (SFNRs) has been investigated by using density functional theory calculations, where fluorosilicene is the fully fluorinated silicene...

  9. Highly efficient hybrid photovoltaics based on hyperbranched three-dimensional TiO2 electron transporting materials

    KAUST Repository

    Mahmood, Khalid

    2015-03-23

    A 3D hyperbranched TiO2 electron transporting material is demonstrated, which exhibits superior carrier transport and lifetime, as well as excellent infiltration, leading to highly efficient mesostructured hybrid solar cells, such as lead-halide perovskites (15.5%) and dye-sensitized solar cells (11.2%). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Electron-transporting small molecule/ o-xylene hybrid additives to boost the performance of simplified inverted polymer solar cells

    Science.gov (United States)

    Qin, Dashan; Cao, Huan; Zhang, Jidong

    2017-05-01

    Electron-transporting small molecule bathophenanthroline (Bphen) together with o-xylene has been used as hybrid additives to improve the performance of simplified inverted polymer solar cells employing ITO alone as cathode and photoactive layer based on polymer [[2,6'-4,8-di(5-ethylhexylthienyl)benzo[1,2-b;3,3-b] dithiophene] [3-fluoro-2[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl

  11. Long-Range Interfacial Electrochemical Electron Transfer of Pseudomonas aeruginosa Azurin-Gold Nanoparticle Hybrid Systems

    DEFF Research Database (Denmark)

    Jensen, Palle Skovhus; Chi, Qijin; Zhang, Jingdong

    2009-01-01

    We have prepared a "hybrid" of the blue copper protein azurin (Pseudomonas aeruginosa) and a 3 nm gold nanoparticle (AuNP). The AuNP/azurin hybrid was assembled on a Au(111)-electrode surface in a two-step process. The AuNP was first attached to the Au(111) electrode via Au-S chemisorption of a 4...

  12. Hybrid (particle in cell-fluid) simulation of ion-acoustic soliton generation including super-thermal and trapped electrons

    Energy Technology Data Exchange (ETDEWEB)

    Nopoush, M.; Abbasi, H. [Faculty of Physics, Amirkabir University of Technology, P. O. Box 15875-4413, Tehran (Iran, Islamic Republic of)

    2011-08-15

    The present paper is devoted to the simulation of the nonlinear disintegration of a localized perturbation into an ion-acoustic soliton in a plasma. Recently, this problem was studied by a simple model [H. Abbasi et al., Plasma Phys. Controlled Fusion 50, 095007 (2008)]. The main assumptions were (i) in the electron velocity distribution function (DF), the ion-acoustic soliton velocity was neglected in comparison to the electron thermal velocity, (ii) on the ion-acoustic evolution time-scale, the electron velocity DF was assumed to be stationary, and (iii) the calculation was restricted to the small amplitude case. In order to generalize the model, one has to consider the evolution of the electron velocity DF for finite amplitudes. For this purpose, a one dimensional electrostatic hybrid code, particle in cell (PIC)-fluid, was designed. It simulates the electrons dynamics by the PIC method and the cold ions dynamics by the fluid equations. The plasma contains a population of super-thermal electrons and, therefore, a Lorentzian (kappa) velocity DF is used to model the high energy tail in the electron velocity DF. Electron trapping is included in the simulation in view of their nonlinear resonant interaction with the localized perturbation. A Gaussian initial perturbation is used to model the localized perturbation. The influence of both the trapped and the super-thermal electrons on this process is studied and compared with the previous model.

  13. Electron energy distribution functions and negative ion concentrations in tandem and hybrid multicusp negative hydrogen ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.B. (Dublin City Univ. (Ireland). Dept. of Physics); Bacal, M. (Ecole Polytechnique, 91 - Palaiseau (France). Lab. de Physique des Milieux Ionises); Graham, W.G. (Queen' s Univ., Belfast, Northern Ireland (UK). School of Mathematics and Physics)

    1991-03-14

    The second derivative of a Langmuir probe characteristic is used to establish the electron energy distribution function (EEDF) in both a tandem and hybrid multicusp H{sup -} ion source. Moveable probes are used to establish the spatial variation of the EEDF. The negative ion density is measured by laser induced photo-detachment. In the case of the hybrid source the EEDF consists of a cold Maxwellian in the central region of the source; the electron temperature increases with increasing discharge current (rising from 0.3 eV at 1 A to 1.2 eV at 50 A when the pressure is 0.4 Pa). A hot electron tail exists in the EEDF of the driver region adjacent to each filament which is shown to consist of a distinct group of primary electrons at low pressure (0.08 Pa) but becomes degraded mainly through inelastic collisions at higher pressures (0.27 Pa). The tandem source, on the other hand, has a single driver region which extends throughout the central region. The primary electron confinement times are much longer so that even at the lowest pressure considered (0.07 Pa) the primaries are degraded. In both cases the measured EEDF at specific locations and values of discharge operating parameters are used to establish the rate coefficients for the processes of importance in H{sup -} production and destruction. (author).

  14. Tomography of the fast electron Bremsstrahlung emission during lower hybrid current drive on Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Peysson, Y.; Imbeaux, F. [Association Euratom-CEA, CEA/Cadarache, Dept. de Recherches sur la Fusion Controlee (DRFC), 13 - Saint-Paul-lez-Durance (France)

    1999-04-01

    A new tomography dedicated to detailed studies of the fast electron Bremsstrahlung emission in the hard X-ray (HXR) energy range between 20 and 200 keV during lower hybrid (LH) current drive experiments on the TORE SUPRA tokamak [Equipe TORE SUPRA, in Proceedings of the 15. Conference on Plasma Physics and Controlled Nuclear Fusion Research, Seville (International Atomic Energy Agency, Vienna, 1995), 1, AIEA-CN-60 / A1-5, p. 105] is presented. Radiation detection is performed by cadmium telluride(CdTe) semiconductors, which have most of the desirable features for a powerful diagnosing of magnetically confined hot plasmas - compact size, high X-ray stopping efficiency, fast timing characteristics, good energy resolution, no sensitivity to magnetic field, reasonable susceptibility to performance degradation from neutron/{gamma}-induced damages. This instrument is made of two independent cameras viewing a poloidal cross-section of the plasma, with respectively 21 and 38 detectors. A coarse spectrometry - 8 energy channels - is carried out for each chord, with an energy resolution of 20 keV. The spatial resolution in the core of the plasma is 4-5 cm, while the time sampling may be lowered down to of 2-4 ms. Powerful inversion techniques based on maximum entropy or regularization algorithms take fully advantage of the large number of line-integrated measurements for very robust estimates of the local HXR profiles as a function of time and photon energy. A detailed account of main characteristics and performances of the diagnostic is reported as well as preliminary results on LH current drive experiments. (authors)

  15. Nature of electron correlation and hybridization in NixCu1−xMnSb Heusler alloys

    Directory of Open Access Journals (Sweden)

    I. Sarkar

    2016-08-01

    Full Text Available The electronic structure of Heusler alloys having mixed magnetic phases, comprising of vicinal anti-ferromagnetic and ferromagnetic orders, is of great significance. We present the results of an electronic structure study on NixCu1−xMnSb Heusler alloys, using Mn-2p core-level photoemission spectroscopy. Room temperature data in the paramagnetic phase reveal a non-monotonic variation of both electron correlation strength and conduction-band hybridization such that the former enhances while the latter weakens for compositions showing a mixed phase relative to compositions at the phase boundaries to the ordered phases. The results suggest a possible electronic driving force for settling mixed-magnetic phases.

  16. Dynamics of the electron thermal diffusivity at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak

    Science.gov (United States)

    Kouprienko, D. V.; Altukhov, A. B.; Gurchenko, A. D.; Gusakov, E. Z.; Kantor, M. Yu.; Lashkul, S. I.; Esipov, L. A.

    2010-05-01

    The dynamics of electron heat transport at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak was studied experimentally. Evolution of the profiles of the electron temperature and density was thoroughly investigated under conditions of fast variation in the plasma parameters. The energy balance in the electron channel is calculated with the help of the ASTRA code by using the measured plasma parameters. Correlation is revealed between the dynamics of electron heat transport and the behavior of small-scale drift turbulence measured using the enhanced scattering correlation diagnostics. The suppression of heat transfer and turbulence agrees well with the increase in the shear of poloidal plasma rotation calculated from experimental data in the neoclassical approximation.

  17. Photovoltaics: Highly Efficient Hybrid Photovoltaics Based on Hyperbranched Three-Dimensional TiO 2 Electron Transporting Materials (Adv. Mater. 18/2015)

    KAUST Repository

    Mahmood, Khalid

    2015-05-01

    Solution-processed hybrid photovoltaics are a potentially disruptive third-generation solar cell technology. On page 2859, A. Amassian and co-workers demonstrate that an electrospun hyperbranched electron-transporting material is capable of achieving highly efficient hybrid solar cells across different platforms, including lead-halide perovskites (15.5%) and dye-sensitized solar cells (11.2%).

  18. Redox-active organometallics: magnetic and electronic couplings through carbon-silicon hybrid molecular connectors.

    Science.gov (United States)

    Hamon, Paul; Justaud, Frederic; Cador, Olivier; Hapiot, Philippe; Rigaut, Stéphane; Toupet, Loïc; Ouahab, Lahcène; Stueger, Harald; Hamon, Jean-René; Lapinte, Claude

    2008-12-24

    Treatment of the triflate complex Cp*(dppe)FeOTf [12; Cp* = eta(5)-C(5)(CH(3))(5), dppe = 1,2-bis(diphenylphosphino)ethane, OTf = CF(3)SO(3)] with an excess of HC[triple bond]C-(Si(CH(3))(2))(x)-C[triple bond]CH (x = 2-4) in diethyl ether provides the binuclear bis(vinylidene) derivatives [Cp*(dppe)Fe=C=CH(Si(CH(3))(2))(x)CH=C=Fe(dppe)Cp*][OTf](2) (x = 2, 13; x = 3, 14; x = 4, 15), which were isolated as ochre solids and rapidly characterized by FT-IR, (1)H, (31)P, and (13)C NMR spectroscopies. The complexes 13-15 were reacted with potassium tert-butoxide to afford the bis(alkynediyl) complexes [Cp*(dppe)Fe-C[triple bond]C(Si(CH(3))(2))(x)C[triple bond]C-Fe(dppe)Cp*] (x = 2, 1; x = 3, 2; x = 4, 3), which were isolated as orange powders in yields ranging from 76 to 91%. The IR, cyclic voltammetry, and UV-vis data obtained for 1-3 and the X-ray crystal structures determined for 1 and 3 reveal the importance of the sigma-pi conjugation (hyperconjugation) between the Si-Si sigma bond and the adjacent C[triple bond]C pi-symmetric orbitals in the description of the electronic structure of the ground state of these complexes. When reacted at low temperature with 2 equiv of [(C(5)H(5))(2)Fe]X or AgX [X = BPh(4), B(3,5-(CF(3))(2)C(6)H(3))(4))], compounds 1-3 provide 1[X](2), 2[X](2), and 3[X](2), which can be isolated and stored below -20 degrees C. EPR spectroscopy and magnetization measurements established that the superexchange interaction propagates through the Si-Si bonds (J = -0.97(2) cm(-1) for 3[X](2)). UV-vis-near-IR spectra were obtained with an optically transparent thin-layer electrosynthetic (OTTLE) cell for 1-3[OTf](n) (n = 0-2). A band with a maximum that increases from 6400 cm(-1) (1[OTf]) to 8500 cm(-1) (3[OTf]) observed for the mixed-valence species was ascribed to intervalence charge transfer evidencing photodriven electron transfer through the carbon-silicon hybrid connectors with H(ab) parameters ranging from 64 to 285 cm(-1).

  19. Development and characterization of interspecific hybrids between Oryza sativa and O. latifolia by in situ hybridization

    Institute of Scientific and Technical Information of China (English)

    YI ChuanDeng; TANG ShuZhu; ZHOU Yong; LIANG GuoHua; GONG ZhiYun; GU MingHong

    2008-01-01

    Oryza sativa and O. latifolia belong to the AA and CCDD genomes of Oryza, respectively. In this study, interspecific hybrids of these species were obtained using the embryo rescue technique. Hybrid pani-cle traits, such as long awns, small grain, exoteric large purple stigma, grain shattering and dispersed panicles, resemble that of the paternal parent, O. latifolia, whereas there is obvious heterosis in such respects as plant height, tillering ability and vegetative vigor. Chromosome pairing and the genomic components of the hybrid were subsequently investigated using genomic in situ hybridization (GISH) and fluorescent in situ hybridization (FISH) analysis. Based on the mitotic metaphase chromosome numbers of the root tips investigated, the hybrid is a triploid with 36 chromosomes. The genomic con-stitution of the hybrid is ACD. In the meiotic metaphase I of the hybrid pollen mother cell, poor chro-mosome pairing was identified and most of the chromosomes were univalent, which resulted in com-plete male sterility in the hybrid.

  20. Fabrication and interfacial electronic structure studies on polypyrrole/TiO2 nano hybrid systems for photovoltaic aspects.

    Science.gov (United States)

    Kumar, Ganesan Mohan; Kawakita, Jin; Jayavel, Ramasamy

    2011-05-01

    The progress in studying the interfacial electronic structures of the developing new class of hybrid organic/inorganic material systems have envisaged a new dimension into the field of photovoltaics, which could be of great help in understanding the nature of charge transfer in them. In this regard, electropolymerization of pyrrole monomers have been carried out at room temperature on the surface of TiO2 working electrodes (assisted by UV radiations) and their interfacial electronic structure has been studied as a function of the applied photo anodic potentials. The formation of polypyrrole deposits has been ensured using FT-IR and Raman spectroscopy. Surface analysis of the hybrid matrix revealed the tendency of polymer molecules to cover up the spherical surface of TiO2 nanoparticles that could help in improving the light absorption rate. Signals (bands) corresponding to pyrrole molecules observed in the ultraviolet photoelectron spectroscopy measurements have been correlated with the polaronic states formed and identified to shift as a function of the applied photo anodic potentials, revealing the decrease in work function of the hybrid system to take place (confirmed using cyclic voltammetry measurements). The decreasing trend in the work function elucidates the adjustment in electronic structure of the system (hybrid materials possessing smaller work functions are generally preferred for photovoltaic studies). The aforementioned behavioural aspects have been reasoned with the increase in overpotential values for polarization, from the decrease in up-take rate of the anionic dopant, which increases the current density values, thereby modifying the conductivity of the systems.

  1. Protonic/electronic hybrid oxide transistor gated by chitosan and its full-swing low voltage inverter applications

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Jin Yu [Shanxi Province Key Laboratory High Gravity Chemical Engineering, North University of China, Taiyuan 030051 (China); Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Zhu, Li Qiang, E-mail: lqzhu@nimte.ac.cn; Xiao, Hui [Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Yuan, Zhi Guo, E-mail: ncityzg@163.com [Shanxi Province Key Laboratory High Gravity Chemical Engineering, North University of China, Taiyuan 030051 (China)

    2015-12-21

    Modulation of charge carrier density in condensed materials based on ionic/electronic interaction has attracted much attention. Here, protonic/electronic hybrid indium-zinc-oxide (IZO) transistors gated by chitosan based electrolyte were obtained. The chitosan-based electrolyte illustrates a high proton conductivity and an extremely strong proton gating behavior. The transistor illustrates good electrical performances at a low operating voltage of ∼1.0 V such as on/off ratio of ∼3 × 10{sup 7}, subthreshold swing of ∼65 mV/dec, threshold voltage of ∼0.3 V, and mobility of ∼7 cm{sup 2}/V s. Good positive gate bias stress stabilities are obtained. Furthermore, a low voltage driven resistor-loaded inverter was built by using an IZO transistor in series with a load resistor, exhibiting a linear relationship between the voltage gain and the supplied voltage. The inverter is also used for decreasing noises of input signals. The protonic/electronic hybrid IZO transistors have potential applications in biochemical sensors and portable electronics.

  2. Medium-energy electrons and heavy ions in Jupiter's magnetosphere - Effects of lower hybrid wave-particle interactions

    Science.gov (United States)

    Barbosa, D. D.

    1986-01-01

    A theory of medium-energy (about keV) electrons and heavy ions in Jupiter's magnetosphere is presented. Lower hybrid waves are generated by the combined effects of a ring instability of neutral wind pickup ions and the modified two-stream instability associated with transport of cool Iogenic plasma. The quasi-linear energy diffusion coefficient for lower hybrid wave-particle interactions is evaluated, and several solutions to the diffusion equation are given. Calculations based on measured wave properties show that the noise substantially modifies the particle distribution functions. The effects are to accelerate superthermal ions and electrons to keV energies and to thermalize the pickup ions on time scales comparable to the particle residence time. The S(2+)/S(+) ratio at medium energies is a measure of the relative contribution from Iogenic thermal plasma and neutral wind ions, and this important quantity should be determined from future measurements. The theory also predicts a preferential acceleration of heavy ions with an accleration time that scales inversely with the root of the ion mass. Electrons accelerated by the process contribute to further reionization of the neutral wind by electron impact, thus providing a possible confirmation of Alfven's critical velocity effect in the Jovian magnetosphere.

  3. 二十年来国内任璧莲研究述评%A Review of Related Researches of Gish Jen in the Twenty Years in China

    Institute of Scientific and Technical Information of China (English)

    高稳

    2016-01-01

    The introduction and researches of Gish Jen have been made for more than twenty years in China. Thus,a timely review of the research achievements will play a certain role in further carrying out the studies of her works. Overview shows that researches of Gish Jen at home focus on such framework as feminism,post -colonial-ism,post-modern theory and her works are interpreted from such perspectives as cultural attribute,cultural iden-tity,racial discrimination,gender discrimination and mother-daughter relationship. The author thinks that the sys-tematic study of her works should pay attention to the following aspects:strengthening the research of cultural poet-ics,the research of ethics value orientation and the interactive research of any relationship among Gish Jen,other Chinese-American writers and other minority writers.%国内对任璧莲的介绍和研究已有20余年,适时地回头梳理已有的研究成果,对进一步开展任璧莲作品的研究将起到一定的总结和反省作用。总览来国内学界所进行的任璧莲研究,大都是在女性主义、后殖民、后现代等理论的框架下,从文化属性、文化认同、种族歧视、性别歧视、母女关系等视角解读其作品。作者认为,任璧莲作品的系统化研究需要注意以下几个方面:应加强对其作品文化诗学、伦理价值取向、任璧莲与其他华裔作家及其他少数族裔作家(譬如犹太作家、非裔作家等)之间的关联与互动等研究。

  4. Generation of amphidiploids from hybrids of wheat and related species from the genera Aegilops, Secale, Thinopyrum, and Triticum as a source of genetic variation for wheat improvement.

    Science.gov (United States)

    Nemeth, Csilla; Yang, Cai-yun; Kasprzak, Paul; Hubbart, Stella; Scholefield, Duncan; Mehra, Surbhi; Skipper, Emma; King, Ian; King, Julie

    2015-02-01

    We aim to improve diversity of domesticated wheat by transferring genetic variation for important target traits from related wild and cultivated grass species. The present study describes the development of F1 hybrids between wheat and related species from the genera Aegilops, Secale, Thinopyrum, and Triticum and production of new amphidiploids. Amphidiploid lines were produced from 20 different distant relatives. Both colchicine and caffeine were successfully used to double the chromosome numbers. The genomic constitution of the newly formed amphidiploids derived from seven distant relatives was determined using genomic in situ hybridization (GISH). Altogether, 42 different plants were analysed, 19 using multicolour GISH separating the chromosomes from the A, B, and D genomes of wheat, as well as the distant relative, and 23 using single colour GISH. Restructuring of the allopolyploid genome, both chromosome losses and aneuploidy, was detected in all the genomes contained by the amphidiploids. From the observed chromosome numbers there is an indication that in amphidiploids the B genome of wheat suffers chromosome losses less frequently than the other wheat genomes. Phenotyping to realize the full potential of the wheat-related grass germplasm is underway, linking the analyzed genotypes to agronomically important target traits.

  5. Effect of primary electron drift on the negative ion efficiency of a volume hybrid multicusp H[sup [minus

    Energy Technology Data Exchange (ETDEWEB)

    Courteille, C.; Bruneteau, J.; Valckx, F.P.G.; Sledziewski, Z.; Bacal, M. (Laboratoire de Physique des Milieux Ionises, Laboratoire du CNRS, Ecole Polytechnique, 91128 Palaiseau Cedex (France))

    1992-10-05

    A new, large, hybrid volume negative ion source is described. Observations of curvature and [ital grad] [ital B] primary electron drift in the multicusp magnetic field are reported. The direction of the electron drift changes from one filament to the neighboring one, because of the change in the direction of the magnetic field. For a given discharge current the extracted negative ion current and the plasma density at the center of the extraction region are affected by the direction of the primary electron drift of the active filaments. It was shown, however, that the negative ion current is controlled by the plasma density at the center of the extraction region. A trajectory calculation, effected in the guiding center approximation, allows to estimate the average drift velocity.

  6. Ti/Au Cathode for Electronic transport material-free organic-inorganic hybrid perovskite solar cells

    Science.gov (United States)

    Shi, Tongfei; Chen, Jian; Zheng, Jianqiang; Li, Xinhua; Zhou, Bukang; Cao, Huaxiang; Wang, Yuqi

    2016-12-01

    We have fabricated organic-inorganic hybrid perovskite solar cell that uses a Ti/Au multilayer as cathode and does not use electron transport materials, and achieved the highest power conversion efficiency close to 13% with high reproducibility and hysteresis-free photocurrent curves. Our cell has a Schottky planar heterojunction structure (ITO/PEDOT:PSS/perovskite/Ti/Au), in which the Ti insertion layer isolate the perovskite and Au layers, thus proving good contact between the Au and perovskite and increasing the cells’ shunt resistance greatly. Moreover, the Ti/Au cathode in direct contact with hybrid perovskite showed no reaction for a long-term exposure to the air, and can provide sufficient protection and avoid the perovskite and PEDOT:PSS layers contact with moisture. Hence, the Ti/Au based devices retain about 70% of their original efficiency after 300 h storage in the ambient environment.

  7. Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications.

    Science.gov (United States)

    Zhao, Yixin; Zhu, Kai

    2016-02-07

    Organic and inorganic hybrid perovskites (e.g., CH(3)NH(3)PbI(3)), with advantages of facile processing, tunable bandgaps, and superior charge-transfer properties, have emerged as a new class of revolutionary optoelectronic semiconductors promising for various applications. Perovskite solar cells constructed with a variety of configurations have demonstrated unprecedented progress in efficiency, reaching about 20% from multiple groups after only several years of active research. A key to this success is the development of various solution-synthesis and film-deposition techniques for controlling the morphology and composition of hybrid perovskites. The rapid progress in material synthesis and device fabrication has also promoted the development of other optoelectronic applications including light-emitting diodes, photodetectors, and transistors. Both experimental and theoretical investigations on organic-inorganic hybrid perovskites have enabled some critical fundamental understandings of this material system. Recent studies have also demonstrated progress in addressing the potential stability issue, which has been identified as a main challenge for future research on halide perovskites. Here, we review recent progress on hybrid perovskites including basic chemical and crystal structures, chemical synthesis of bulk/nanocrystals and thin films with their chemical and physical properties, device configurations, operation principles for various optoelectronic applications (with a focus on solar cells), and photophysics of charge-carrier dynamics. We also discuss the importance of further understanding of the fundamental properties of hybrid perovskites, especially those related to chemical and structural stabilities.

  8. Driving electrocatalytic activity by interface electronic structure control in a metalloprotein hybrid catalyst for efficient hydrogen evolution.

    Science.gov (United States)

    Behera, Sushant Kumar; Deb, Pritam; Ghosh, Arghya

    2016-08-17

    The rational design of metalloprotein hybrid structures and precise calculations for understanding the role of the interfacial electronic structure in regulating the HER activity of water splitting sites and their microscopic effect for obtaining robust hydrogen evolution possess great promise for developing highly efficient nano-bio hybrid HER catalysts. Here, we employ high-accuracy linear-scaling density functional theory calculations using a near-complete basis set and a minimal parameter implicit solvent model within the self-consistent calculations, on silver (Ag) ions assimilated on bacteriorhodopsin (bR) at specific binding sites. Geometry optimization indicates the formation of active sites at the interface of the metalloprotein complex and the density of states reflects the metallic nature of the active sites. The reduced value of the canonical orbital gap indicates the state of dynamic nature after Ag ion assimilation on active sites and smooth electron transfer. These incorporated active protein sites are more efficient in electrolytic splitting of water than pristine sites due to their low value of Gibbs free energy for the HER in terms of hydrogen coverages. Volcano plot analysis and the free energy diagram are compared for understanding the hydrogen evolution efficiency. Moreover, the essential role of the interfacial electronic properties in regulating the HER catalytic activity of water splitting sites and enhancing the efficiency is elucidated.

  9. Applications of the Hybrid Theory to the Scattering of Electrons from HE+ and Li++ and Resonances in these Systems

    Science.gov (United States)

    Bhatia, Anand K.

    2008-01-01

    Applications of the hybrid theory to the scattering of electrons from Ile+ and Li++ and resonances in these systems, A. K. Bhatia, NASA/Goddard Space Flight Center- The Hybrid theory of electron-hydrogen elastic scattering [I] is applied to the S-wave scattering of electrons from He+ and Li++. In this method, both short-range and long-range correlations are included in the Schrodinger equation at the same time. Phase shifts obtained in this calculation have rigorous lower bounds to the exact phase shifts and they are compared with those obtained using the Feshbach projection operator formalism [2], the close-coupling approach [3], and Harris-Nesbet method [4]. The agreement among all the calculations is very good. These systems have doubly-excited or Feshbach resonances embedded in the continuum. The resonance parameters for the lowest ' S resonances in He and Li+ are calculated and they are compared with the results obtained using the Feshbach projection operator formalism [5,6]. It is concluded that accurate resonance parameters can be obtained by the present method, which has the advantage of including corrections due to neighboring resonances and the continuum in which these resonances are embedded.

  10. ORNL TNS program: microwave start-up of tokamak plasmas near electron cyclotron and upper hybrid resonances

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Y. K.M.; Borowski, S. K.

    1977-12-01

    The scenario of toroidal plasma start-up with microwave initiation and heating near the electron cyclotron frequency is suggested and examined here. We assume microwave irradiation from the high field side and an anomalously large absorption of the extraordinary waves near the upper hybrid resonance. The dominant electron energy losses are assumed to be due to magnetic field curvature and parallel drifts, ionization of neutrals, cooling by ions, and radiation by low Z impurities. It is shown by particle and energy balance considerations that electron temperatures around 250 eV and densities of 10/sup 12/ to 10/sup 13/ cm/sup -3/ can be maintained, at least in a narrow region near the upper hybrid resonance, with modest microwave powers in the Impurity Study Experiment (ISX) (120 kW at 28 GHz) and The Next Step (TNS) (0.57 MW at 120 GHz). The loop voltages required for start-up from these initial plasmas are also estimated. It is shown that the loop voltage can be reduced by a factor of five to ten from that for unassisted start-up without an increase in the resistive loss in volt-seconds. If this reduction in loop voltage is verified in the ISX experiments, substantial savings in the cost of power supplies for the ohmic heating (OH) and equilibrium field (EF) coils can be realized in future large tokamaks.

  11. Controlled growth of carbon nanotube-graphene hybrid materials for flexible and transparent conductors and electron field emitters.

    Science.gov (United States)

    Nguyen, Duc Dung; Tai, Nyan-Hwa; Chen, Szu-Ying; Chueh, Yu-Lun

    2012-01-21

    We report a versatile synthetic process based on rapid heating and cooling chemical vapor deposition for the growth of carbon nanotube (CNT)-graphene hybrid materials where the thickness of graphene and density of CNTs are properly controlled. Graphene films are demonstrated as an efficient barrier layer for preventing poisoning of iron nanoparticles, which catalyze the growth of CNTs on copper substrates. Based on this method, the opto-electronic and field emission properties of graphene integrated with CNTs can be remarkably tailored. A graphene film exhibits a sheet resistance of 2.15 kΩ sq(-1) with a transmittance of 85.6% (at 550 nm), while a CNT-graphene hybrid film shows an improved sheet resistance of 420 Ω sq(-1) with an optical transmittance of 72.9%. Moreover, CNT-graphene films are demonstrated as effective electron field emitters with low turn-on and threshold electric fields of 2.9 and 3.3 V μm(-1), respectively. The development of CNT-graphene films with a wide range of tunable properties presented in this study shows promising applications in flexible opto-electronic, energy, and sensor devices.

  12. 3D electrostatic gyrokinetic electron and fully kinetic ion simulation of lower-hybrid drift instability of Harris current sheet

    Science.gov (United States)

    Wang, Zhenyu; Lin, Yu; Wang, Xueyi; Tummel, Kurt; Chen, Liu

    2016-07-01

    The eigenmode stability properties of three-dimensional lower-hybrid-drift-instabilities (LHDI) in a Harris current sheet with a small but finite guide magnetic field have been systematically studied by employing the gyrokinetic electron and fully kinetic ion (GeFi) particle-in-cell (PIC) simulation model with a realistic ion-to-electron mass ratio mi/me . In contrast to the fully kinetic PIC simulation scheme, the fast electron cyclotron motion and plasma oscillations are systematically removed in the GeFi model, and hence one can employ the realistic mi/me . The GeFi simulations are benchmarked against and show excellent agreement with both the fully kinetic PIC simulation and the analytical eigenmode theory. Our studies indicate that, for small wavenumbers, ky, along the current direction, the most unstable eigenmodes are peaked at the location where k →.B → =0 , consistent with previous analytical and simulation studies. Here, B → is the equilibrium magnetic field and k → is the wavevector perpendicular to the nonuniformity direction. As ky increases, however, the most unstable eigenmodes are found to be peaked at k →.B → ≠0 . In addition, the simulation results indicate that varying mi/me , the current sheet width, and the guide magnetic field can affect the stability of LHDI. Simulations with the varying mass ratio confirm the lower hybrid frequency and wave number scalings.

  13. Skew(er)ing Identities: the assertion of self in Gish Jen’s Mona in the promised land and Colson Whitehead’s Sag Harbor

    OpenAIRE

    Alves, Dorothy Mary

    2012-01-01

    Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Línguas Literatura e Cultura Através duma leitura pormenorizada dos textos em epígrafe e à luz da história norte-americana de opressão racial, a minha investigação destina-se a determinar em que medida Gish Jen e Colson Whitehead se sentem prezos do ‘nós’ das suas identidades étnicas, ou se por ventura, as suas obras são posições auto assertivos contra o determinismo hegemónico percepcionado...

  14. The embryo rescue derived intergeneric hybrid between chrysanthemum and Ajania przewalskii shows enhanced cold tolerance.

    Science.gov (United States)

    Deng, Yanming; Chen, Sumei; Chen, Fadi; Cheng, Xi; Zhang, Fei

    2011-12-01

    Five intergeneric hybrids between the chrysanthemum cultivar 'Zhongshanjingui' (as female) and Ajania przewalskii (as male) were obtained with the help of embryo culture. While 'Zhongshanjingui' bears a standard anemone type flower and A. przewalskii a non-anemone type one, the inflorescence type of the hybrids varied. The diameter of the hybrids' flowers was intermediate between those of the parents. The chromosome number of the hybrids was 2n = 45, of which GISH analysis was able to establish that 27 were inherited from 'Zhongshanjingui' and the other 18 from A. przewalskii. A combination of various assays was used to show that the cold tolerance of the hybrids was equivalent to that of the highly tolerant A. przewalskii parent. Enhanced cold tolerance was correlated with an increase in free proline and a decrease in malondialdehyde content.

  15. Study of the hybrid controller electronics for the nano-stabilization of mechanical vibrations of CLIC quadrupoles

    CERN Document Server

    Fernandez Carmona, P; Collette, C; Esposito, M; Guinchard, M; Janssens, S; Kuzmin, A; Moron Ballester, R

    2011-01-01

    In order to achieve the required levels of luminosity in the CLIC linear collider, mechanical stabilization of quadrupoles to the nanometre level is required. The paper describes a design of hybrid electronics combining an analogue controller and digital communication with the main machine controller. The choice of local analogue control ensures the required low latency while still keeping sufficiently low noise level. Furthermore, it reduces the power consumption, rack space and cost. Sensitivity to radiation single events upsets is reduced compared to a digital controller. The digital part is required for fine tuning and real time monitoring via digitization of critical parameters.

  16. A camera for imaging hard x-rays from suprathermal electrons during lower hybrid current drive on PBX-M

    Energy Technology Data Exchange (ETDEWEB)

    von Goeler, S.; Kaita, R.; Bernabei, S.; Davis, W.; Fishman, H.; Gettelfinger, G.; Ignat, D.; Roney, P.; Stevens, J.; Stodiek, W. (Princeton Univ., NJ (United States). Plasma Physics Lab.); Jones, S.; Paoletti, F. (Massachusetts Inst. of Tech., Cambridge, MA (United States). Plasma Fusion Center); Petravich, G. (Hungarian Academy of Sciences, Budapest (Hungary). Central Research Inst. for Physics); Rimini,

    1993-05-01

    During lower hybrid current drive (LHCD), suprathermal electrons are generated that emit hard X-ray bremsstrahlung. A pinhole camera has been installed on the PBX-M tokamak that records 128 [times] 128 pixel images of the bremsstrahlung with a 3 ms time resolution. This camera has identified hollow radiation profiles on PBX-M, indicating off-axis current drive. The detector is a 9in. dia. intensifier. A detailed account of the construction of the Hard X-ray Camera, its operation, and its performance is given.

  17. Ultrafast electron transfer from low band gap conjugated polymer to quantum dots in hybrid photovoltaic materials

    Science.gov (United States)

    Couderc, Elsa; Greaney, Matthew J.; Thornbury, William; Brutchey, Richard L.; Bradforth, Stephen E.

    2014-09-01

    Ultrafast transient absorption spectroscopy is used in conjunction with chemical doping experiments to study the photo-generation of charges in hybrid thin films composed of PCPDTBT and CdSe quantum dots. We show how we use chemical doping experiments to de-convolute the spectral signatures of the transient states in the near infrared.

  18. Understanding the electronic structure of CdSe quantum dot-fullerene (C60) hybrid nanostructure for photovoltaic applications

    Science.gov (United States)

    Sarkar, Sunandan; Rajbanshi, Biplab; Sarkar, Pranab

    2014-09-01

    By using the density-functional tight binding method, we studied the electronic structure of CdSe quantum dot(QD)-buckminsterfullerene (C60) hybrid systems as a function of both the size of the QD and concentration of the fullerene molecule. Our calculation reveals that the lowest unoccupied molecular orbital energy level of the hybrid CdSeQD-C60 systems lies on the fullerene moiety, whereas the highest occupied molecular orbital (HOMO) energy level lies either on the QD or the fullerene depending on size of the CdSe QD. We explored the possibility of engineering the energy level alignment by varying the size of the CdSe QD. With increase in size of the QD, the HOMO level is shifted upward and crosses the HOMO level of the C60-thiol molecule resulting transition from the type-I to type-II band energy alignment. The density of states and charge density plot support these types of band gap engineering of the CdSe-C60 hybrid systems. This type II band alignment indicates the possibility of application of this nanohybrid for photovoltaic purpose.

  19. Efficient Electron Collection in Hybrid Polymer Solar Cells: In-Situ-Generated ZnO/Poly(3-hexylthiophene) Scaffolded by a TiO2 Nanorod Array.

    Science.gov (United States)

    Liao, Wen-Pin; Wu, Jih-Jen

    2013-06-06

    A nanoarchitectural hybrid polymer solar cell, integrating the ordered and the bulk heterojunction hybrid polymer solar cells, is fabricated by infiltrating the diethylzinc/poly(3-hexylthiophene) (P3HT) solution into the interstices of the TiO2 nanorod (NR) array. An inorganic network composed of tiny ZnO nanocrystals is constructed in the in-situ-generated hybrid within the interstice of the single-crystalline TiO2 NRs. The TiO2 NR array, which possesses a longer electron lifetime and an appropriate electron-transport rate, serves not only as an electron transporter/collector extended from fluorine-doped tin oxide (FTO) electrode to sustain the efficient electron collection but also as a scaffold to hold the sufficient amount of ZnO/P3HT hybrid. The in-situ-generated ZnO/P3HT hybrid layer with superior charge separation efficiency can therefore be thickened in the presence of a TiO2 NR array for increasing the light-harvesting efficiency. A notable efficiency of 2.46% is therefore attained in the TiO2 NR-ZnO/P3HT hybrid solar cell.

  20. Screened Hybrid and DFT + U Studies of the Structural, Electronic, and Optical Properties of U3O8

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Xiaodong; Martin, Richard L.; Scuseria, Gustavo E.; Rudin, Sven P.; Batista, Enrique R.; Burrell, Anthony K.

    2012-11-26

    A systematic comparison of the structures and electronic and optical properties of U3O8 in the c2mm, P¯62m, and P21/m structures (the α, β, and γ phases, respectively) is performed using density functional theory + U (PBE + U) and the Heyd–Scuseria–Ernzerhof screened hybrid functional (HSE). The relationship between the semiconducting C2mm phase of U3O8 and the high temperature, metallic P¯62m phase is explored in more detail. Our calculated results show that the HSE functional gives a better description of the electronic and optical properties when compared with available experimental data for the α and β phases, but neither approach does particularly well for the high pressure γ phase.

  1. Screened hybrid and DFT + U studies of the structural, electronic, and optical properties of U3O8

    Science.gov (United States)

    Wen, Xiao-Dong; Martin, Richard L.; Scuseria, Gustavo E.; Rudin, Sven P.; Batista, Enrique R.; Burrell, Anthony K.

    2013-01-01

    A systematic comparison of the structures and electronic and optical properties of U3O8 in the c2mm, P\\bar {6}2 m, and P21/m structures (the α, β, and γ phases, respectively) is performed using density functional theory + U (PBE + U) and the Heyd-Scuseria-Ernzerhof screened hybrid functional (HSE). The relationship between the semiconducting C2mm phase of U3O8 and the high temperature, metallic P\\bar {6}2 m phase is explored in more detail. Our calculated results show that the HSE functional gives a better description of the electronic and optical properties when compared with available experimental data for the α and β phases, but neither approach does particularly well for the high pressure γ phase.

  2. Hybrids of organic molecules and flat, oxide-free silicon: high-density monolayers, electronic properties, and functionalization.

    Science.gov (United States)

    Li, Yan; Calder, Steven; Yaffe, Omer; Cahen, David; Haick, Hossam; Kronik, Leeor; Zuilhof, Han

    2012-07-03

    Since the first report of Si-C bound organic monolayers on oxide-free Si almost two decades ago, a substantial amount of research has focused on studying the fundamental mechanical and electronic properties of these Si/molecule surfaces and interfaces. This feature article covers three closely related topics, including recent advances in achieving high-density organic monolayers (i.e., atomic coverage >55%) on oxide-free Si(111) substrates, an overview of progress in the fundamental understanding of the energetics and electronic properties of hybrid Si/molecule systems, and a brief summary of recent examples of subsequent functionalization on these high-density monolayers, which can significantly expand the range of applicability. Taken together, these topics provide an overview of the present status of this active area of research.

  3. Electronic and optical properties of (U,Th)O2 compound from screened hybrid density functional studies

    Science.gov (United States)

    Mo, Chongjie; Yang, Yu; Kang, Wei; Zhang, Ping

    2016-04-01

    The electronic structure and optical properties for the (U,Th)O2 compound are systematically studied by employing the Heyd-Scuseria-Ernzerh method (HSE) of screened hybrid density functional. The electronic band gap of (U,Th)O2 is predicted to be 3.06 eV, in the middle of the values of UO2 and ThO2. Based on wavefunction analysis, we conclude (U,Th)O2 to be a Mott insulator in its ground state. The frequency dependent dielectric functions and optical properties are then calculated and compared with those of ThO2 and UO2. At the visible light frequency range, the adsorption coefficients for ThO2, UO2 and (U,Th)O2 are totally different, which gives an accessible method to predict the proportion of U atoms in an arbitrary unknown (U,Th)O2 compounds from the adsorption spectrum of visible lights.

  4. Tuning the electronic hybridization in the heavy fermion cage compound YbFe2Zn20 with Cd doping

    Science.gov (United States)

    Cabrera-Baez, M.; Ribeiro, R. A.; Avila, M. A.

    2016-09-01

    The tuning of the electronic properties of heavy fermion compounds by chemical substitution provides excellent opportunities for further understanding the physics of hybridized ions in crystal lattices. Here we present an investigation on the effects of Cd doping in flux-grown single crystals of the complex intermetallic cage compound YbFe2Zn20, which has been described as a heavy fermion with a Sommerfeld coefficient of 535 mJ mol-1 · K-2. The substitution of Cd for Zn disturbs the system by expanding the unit cell and, in this case, the size of the Zn cages that surround the Yb and Fe. With an increasing amount of Cd, the hybridization between the Yb 4f electrons and the conduction electrons is weakened, as shown by a decrease in the Sommerfeld coefficient, which should be accompanied by a valence shift of the Yb3+ due to the negative chemical pressure effect. This scenario is also supported by the low temperature DC magnetic susceptibility, which is gradually suppressed and shows an increment of the Kondo temperature, based on a shift to higher temperatures of the characteristic broad susceptibility peak. Furthermore, the DC resistivity decreases with the isoelectronic substitution of Cd for Zn, contrary to expectations in an increasingly disordered system, and implying that the valence shift is not related to charge carrier doping. The combined results demonstrate the excellent complementarity between positive physical pressure and negative chemical pressure, and point to a rich playground for exploring the physics and chemistry of strongly correlated electron systems in the general family of Zn20 compounds, despite their structural complexity.

  5. Implications of orbital hybridization on the electronic properties of doped quantum dots: the case of Cu:CdSe

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Joshua T.; Forsythe, Kyle; Hutchins, Jamie; Meulenberg, Robert W.

    2016-04-13

    This paper investigates how chemical dopants affect the electronic properties of CdSe quantum dots (QDs) and why a model that incorporates the concepts of orbital hybridization must be used to understand these properties. Extended X-ray absorption fine structure spectroscopy measurements show that copper dopants in CdSe QDs occur primarily through a statistical doping mechanism. Ultraviolet photoemission spectroscopy (UPS) experiments provide a detailed insight on the valence band (VB) structure of doped and undoped QDs. Using UPS measurements, we are able to observe photoemission from the Cu d-levels above VB maximum of the QDs which allows a complete picture of the energy band landscape of these materials. This information provides insights into many of the physical properties of doped QDs, including the highly debated near-infrared photoluminescence in Cu doped CdSe QDs. We show that all our results point to a common theme of orbital hybridization in Cu doped CdSe QDs which leads to optically and electronically active states below the conduction band minimum. Our model is supported from current–voltage measurements of doped and undoped materials, which exhibit Schottky to Ohmic behavior with Cu doping, suggestive of a tuning of the lowest energy states near the Fermi level.

  6. Distribution and evolution of repeated sequences in genomes of Triatominae (Hemiptera-Reduviidae inferred from genomic in situ hybridization.

    Directory of Open Access Journals (Sweden)

    Sebastian Pita

    Full Text Available The subfamily Triatominae, vectors of Chagas disease, comprises 140 species characterized by a highly homogeneous chromosome number. We analyzed the chromosomal distribution and evolution of repeated sequences in Triatominae genomes by Genomic in situ Hybridization using Triatoma delpontei and Triatoma infestans genomic DNAs as probes. Hybridizations were performed on their own chromosomes and on nine species included in six genera from the two main tribes: Triatomini and Rhodniini. Genomic probes clearly generate two different hybridization patterns, dispersed or accumulated in specific regions or chromosomes. The three used probes generate the same hybridization pattern in each species. However, these patterns are species-specific. In closely related species, the probes strongly hybridized in the autosomal heterochromatic regions, resembling C-banding and DAPI patterns. However, in more distant species these co-localizations are not observed. The heterochromatic Y chromosome is constituted by highly repeated sequences, which is conserved among 10 species of Triatomini tribe suggesting be an ancestral character for this group. However, the Y chromosome in Rhodniini tribe is markedly different, supporting the early evolutionary dichotomy between both tribes. In some species, sex chromosomes and autosomes shared repeated sequences, suggesting meiotic chromatin exchanges among these heterologous chromosomes. Our GISH analyses enabled us to acquire not only reliable information about autosomal repeated sequences distribution but also an insight into sex chromosome evolution in Triatominae. Furthermore, the differentiation obtained by GISH might be a valuable marker to establish phylogenetic relationships and to test the controversial origin of the Triatominae subfamily.

  7. Design of Passive Analog Electronic Circuits Using Hybrid Modified UMDA algorithm

    Directory of Open Access Journals (Sweden)

    J. Slezak

    2015-04-01

    Full Text Available Hybrid evolutionary passive analog circuits synthesis method based on modified Univariate Marginal Distribution Algorithm (UMDA and a local search algorithm is proposed in the paper. The modification of the UMDA algorithm which allows to specify the maximum number of the nodes and the maximum number of the components of the synthesized circuit is proposed. The proposed hybrid approach efficiently reduces the number of the objective function evaluations. The modified UMDA algorithm is used for synthesis of the topology and the local search algorithm is used for determination of the parameters of the components of the designed circuit. As an example the proposed method is applied to a problem of synthesis of the fractional capacitor circuit.

  8. First Principles Study on the Electronic Structure and Interface Stability of Hybrid Silicene/Fluorosilicene Nanoribbons

    OpenAIRE

    Jiang, Q G; Zhang, J. F.; Ao, Z. M.; Y. P. Wu

    2015-01-01

    The interface stability of hybrid silicene/fluorosilicene nanoribbons (SFNRs) has been investigated by using density functional theory calculations, where fluorosilicene is the fully fluorinated silicene. It is found that the diffusion of F atoms at the zigzag and armchair interfaces of SFNRs is endothermic, and the corresponding minimum energy barriers are respectively 1.66 and 1.56?eV, which are remarkably higher than the minimum diffusion energy barrier of one F atom and two F atoms on pri...

  9. Carbon and metal nanotube hybrid structures on graphene as efficient electron field emitters

    Science.gov (United States)

    Heo, Kwang; Lee, Byung Yang; Lee, Hyungwoo; Cho, Dong-guk; Arif, Muhammad; Kim, Kyu Young; Choi, Young Jin; Hong, Seunghun

    2016-07-01

    We report a facile and efficient method for the fabrication of highly-flexible field emission devices by forming tubular hybrid structures based on carbon nanotubes (CNTs) and nickel nanotubes (Ni NTs) on graphene-based flexible substrates. By employing an infiltration process in anodic alumina oxide (AAO) templates followed by Ni electrodeposition, we could fabricate CNT-wrapped Ni NT/graphene hybrid structures. During the electrodeposition process, the CNTs served as Ni nucleation sites, resulting in a large-area array of high aspect-ratio field emitters composed of CNT-wrapped Ni NT hybrid structures. As a proof of concepts, we demonstrate that high-quality flexible field emission devices can be simply fabricated using our method. Remarkably, our proto-type field emission devices exhibited a current density higher by two orders of magnitude compared to other devices fabricated by previous methods, while maintaining its structural integrity in various bending deformations. This novel fabrication strategy can be utilized in various applications such as optoelectronic devices, sensors and energy storage devices.

  10. Hybrid matrix method for stable numerical analysis of the propagation of Dirac electrons in gapless bilayer graphene superlattices

    Science.gov (United States)

    Briones-Torres, J. A.; Pernas-Salomón, R.; Pérez-Álvarez, R.; Rodríguez-Vargas, I.

    2016-05-01

    Gapless bilayer graphene (GBG), like monolayer graphene, is a material system with unique properties, such as anti-Klein tunneling and intrinsic Fano resonances. These properties rely on the gapless parabolic dispersion relation and the chiral nature of bilayer graphene electrons. In addition, propagating and evanescent electron states coexist inherently in this material, giving rise to these exotic properties. In this sense, bilayer graphene is unique, since in most material systems in which Fano resonance phenomena are manifested an external source that provides extended states is required. However, from a numerical standpoint, the presence of evanescent-divergent states in the eigenfunctions linear superposition representing the Dirac spinors, leads to a numerical degradation (the so called Ωd problem) in the practical applications of the standard Coefficient Transfer Matrix (K) method used to study charge transport properties in Bilayer Graphene based multi-barrier systems. We present here a straightforward procedure based in the hybrid compliance-stiffness matrix method (H) that can overcome this numerical degradation. Our results show that in contrast to standard matrix method, the proposed H method is suitable to study the transmission and transport properties of electrons in GBG superlattice since it remains numerically stable regardless the size of the superlattice and the range of values taken by the input parameters: the energy and angle of the incident electrons, the barrier height and the thickness and number of barriers. We show that the matrix determinant can be used as a test of the numerical accuracy in real calculations.

  11. Hybrid Simulation of Laser-Plasma Interactions and Fast Electron Transport in Inhomogeneous Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, B I; Kemp, A; Divol, L

    2009-05-27

    A new framework is introduced for kinetic simulation of laser-plasma interactions in an inhomogenous plasma motivated by the goal of performing integrated kinetic simulations of fast-ignition laser fusion. The algorithm addresses the propagation and absorption of an intense electromagnetic wave in an ionized plasma leading to the generation and transport of an energetic electron component. The energetic electrons propagate farther into the plasma to much higher densities where Coulomb collisions become important. The high-density plasma supports an energetic electron current, return currents, self-consistent electric fields associated with maintaining quasi-neutrality, and self-consistent magnetic fields due to the currents. Collisions of the electrons and ions are calculated accurately to track the energetic electrons and model their interactions with the background plasma. Up to a density well above critical density, where the laser electromagnetic field is evanescent, Maxwell's equations are solved with a conventional particle-based, finite-difference scheme. In the higher-density plasma, Maxwell's equations are solved using an Ohm's law neglecting the inertia of the background electrons with the option of omitting the displacement current in Ampere's law. Particle equations of motion with binary collisions are solved for all electrons and ions throughout the system using weighted particles to resolve the density gradient efficiently. The algorithm is analyzed and demonstrated in simulation examples. The simulation scheme introduced here achieves significantly improved efficiencies.

  12. Electronic Interfacing Between a Living Cell and a Nanodevice: A Bio-Nano Hybrid System

    Energy Technology Data Exchange (ETDEWEB)

    Saraf, Ravi F. [Univ. of Nebraska, Lincoln, NE (United States). Dept. of Chemical and Biomolecular Engineering

    2013-12-31

    The primary goal of this program was to couple physical electronics with live cells to leverage the highly sophisticated functions of a biological system to ultimately create advanced functionality. The study was built on a unique self-assembled architecture of nanoparticles that exhibits transport properties that are sensitive to single-electron charge modulation. At room temperature, the energy of switching due to single-electron charge modulation was in the range of 4 to 100 kT. The structure invented in the principal investigator’s lab is a two-dimensional (2D) network of one-dimensional (1D) necklaces of 10 nm Au nanoparticles. The electron transport through the necklace network is regulated by quantum mechanical single-electron traps. As a result of the single electron traps, the all metal nanoparticle network array displays a conduction band gap. Fundamental studies on the transport properties of the network in air and water were studied to regulate the band gap by tailoring the network structure to demonstrate the first electrochemical single electron transistor operating in water. Cells were interfaced with the network to observe electrochemical activity in a cell during photosynthesis and single viral infection.

  13. Effects of APTEOS content and electron beam irradiation on physical and separation properties of hybrid nylon-66 membranes

    Energy Technology Data Exchange (ETDEWEB)

    Linggawati, A. [Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Mohammad, A.W., E-mail: wahabm@eng.ukm.my [Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Leo, C.P. [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, S.P.S., Penang (Malaysia)

    2012-03-15

    Highlights: Black-Right-Pointing-Pointer Hybrid nylon-66 membranes were prepared using APTEOS and modified by EB irradiation. Black-Right-Pointing-Pointer APTEOS increase the formation of cellular pores. Black-Right-Pointing-Pointer EB irradiation causes the growth of dense layer. Black-Right-Pointing-Pointer 10 wt% of APTEOS and irradiation at 70 kGy shows satisfactory separation of salt. - Abstract: Nylon-66 contains functional groups which form hydrogen bonds with inorganic silica networks and allow the creation of hybrid membranes. As a typical semicrystalline polymer, nylon-66 can be crosslinked through electron beam (EB) irradiation to form nanofiltration membranes. The effects of {gamma}-aminopropyltriethoxylsilane (APTEOS) and EB irradiation on the physical and separation properties of nylon-66 membranes were studied in this work. Hybrid nylon-66 membranes were prepared by adding an APTEOS solution (5 wt%, 10 wt% and 20 wt%) into nylon-66 which was dissolved in formic acid. Before air drying, membranes were irradiated at 60 kGy, 70 kGy and 80 kGy. More cellular pores were formed in nylon-66 membranes with the addition of APTEOS. However, increased irradiation dose caused the formation of a dense layer in nylon-66 membranes. Crosslinked silica in nylon-66 membranes was confirmed by FT-IR and DMA, while XRD results showed that there was a high degree of crystallinity in some membranes after irradiation. With improvements in membrane pore size and the ratio of membrane thickness to porosity, nylon-66 membrane with 10 wt% of APTEOS irradiated at 70 kGy exhibited satisfactory permeability, excellent removal of neutral solutes and improved rejection of divalent ions.

  14. Conducting polymer-coated Physarum polycephalum towards the synthesis of bio-hybrid electronic devices

    Science.gov (United States)

    de Lacy Costello, B. J. P.; Mayne, R.; Adamatzky, A.

    2015-04-01

    This paper presents a generic method for the production of functionalized coatings on biological substrates. The specific method described involves the functionalization of the living plasmodial stage of Physarum polycephalum with the conducting organic polymer polypyrrole. The simple method involves localized treatment of tube sections with a solution of ferric chloride, followed by exposure to the vapour or a liquid solution of the pyrrole monomer. This technique enables the production of surface-coated conducting plasmodial tubes of certain lengths to be formed at specific points. Measurement of the electrical resistance of a 1 cm functionalized tube gave a value of 100 k? . The use of this selective functionalization technique means that the majority of the growing plasmodium remains unfunctionalized and living; thus, a true hybrid device is formed. It can be seen how a range of functionalized polymers and materials whereby a chemical activator, for the formation of the product (or the pre-cursor) can be added to P. polycephalum (or other organisms) followed by reaction to form a hybrid material.

  15. Electronic structure modeling of InAs/GaSb superlattices with hybrid density functional theory

    Science.gov (United States)

    Garwood, T.; Modine, N. A.; Krishna, S.

    2017-03-01

    The application of first-principles calculations holds promise for greatly improving our understanding of semiconductor superlattices. Developing a procedure to accurately predict band gaps using hybrid density functional theory lays the groundwork for future studies investigating more nuanced properties of these structures. Our approach allows a priori prediction of the properties of SLS structures using only the band gaps of the constituent materials. Furthermore, it should enable direct investigation of the effects of interface structure, e.g., intermixing or ordering at the interface, on SLS properties. In this paper, we present band gap data for various InAs/GaSb type-II superlattice structures calculated using the generalized Kohn-Sham formulation of density functional theory. A PBE0-type hybrid functional was used, and the portion of the exact exchange was tuned to fit the band gaps of the binary compounds InAs and GaSb with the best agreement to bulk experimental values obtained with 18% of the exact exchange. The heterostructures considered in this study are 6 monolayer (ML) InAs/6 ML GaSb, 8 ML InAs/8 ML GaSb and 10 ML InAs/10 ML GaSb with deviations from the experimental band gaps ranging from 3% to 11%.

  16. Hybrid Orbital and Numerical Grid Representationfor Electronic Continuum Processes: Double Photoionization of Atomic Beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Yip, Frank L; McCurdy, C. William; Rescigno, Thomas N

    2010-04-19

    A general approach for ab initio calculations of electronic continuum processes is described in which the many-electron wave function is expanded using a combination of orbitals at short range and the finite-element discrete variable representation(FEM-DVR) at larger distances. The orbital portion of the basis allows the efficient construction of many-electron configurations in which some of the electrons are bound, but because the orbitals are constructed from an underlying FEM-DVR grid, the calculation of two-electron integrals retains the efficiency of the primitive FEM-DVR approach. As an example, double photoionization of beryllium is treated in a calculation in which the 1s{sup 2} core is frozen. This approach extends the use of exterior complex scaling (ECS) successfully applied to helium and H{sub 2} to calculations with two active electrons on more complicated targets. Integrated, energy-differential and triply-differential cross sections are exhibited, and the results agree well with other theoretical investigations.

  17. An enhanced security solution for electronic medical records based on AES hybrid technique with SOAP/XML and SHA-1.

    Science.gov (United States)

    Kiah, M L Mat; Nabi, Mohamed S; Zaidan, B B; Zaidan, A A

    2013-10-01

    This study aims to provide security solutions for implementing electronic medical records (EMRs). E-Health organizations could utilize the proposed method and implement recommended solutions in medical/health systems. Majority of the required security features of EMRs were noted. The methods used were tested against each of these security features. In implementing the system, the combination that satisfied all of the security features of EMRs was selected. Secure implementation and management of EMRs facilitate the safeguarding of the confidentiality, integrity, and availability of e-health organization systems. Health practitioners, patients, and visitors can use the information system facilities safely and with confidence anytime and anywhere. After critically reviewing security and data transmission methods, a new hybrid method was proposed to be implemented on EMR systems. This method will enhance the robustness, security, and integration of EMR systems. The hybrid of simple object access protocol/extensible markup language (XML) with advanced encryption standard and secure hash algorithm version 1 has achieved the security requirements of an EMR system with the capability of integrating with other systems through the design of XML messages.

  18. Molecular cytogenetics of Alstroemeria: identification of parental genomes in interspecific hybrids and characterization of repetitive DNA families in constitutive heterochromatin.

    Science.gov (United States)

    Kuipers, A G; van Os, D P; de Jong, J H; Ramanna, M S

    1997-02-01

    The genus Alstroemeria consists of diploid (2n = 2x = 16) species originating mainly from Chile and Brazil. Most cultivars are triploid or tetraploid interspecific hybrids. C-banding of eight species revealed obvious differentiation of constitutive heterochromatin within the genus. The present study focused on the molecular (cyto)genetic background of this differentiation. Genomic slot-blot analysis demonstrated strong conservation of major parts of the genomes among six species. The chromosomes of A. aurea and A. ligtu, species with pronounced interstitial C-bands, were found to contain large amounts of highly repetitive and species-specific DNA. The variation in size, number and intensity of strongly probed bands of major repetitive DNA families observed in genomic Southern blots of Sau3A, HaeIII, and MseI digests indicated a strong correlation between variation in genomic DNA composition and different C-banding patterns among Alstroemeria species. Genomic in situ hybridization (GISH) revealed a clear distinction between parental chromosomes in the hybrids between Chilean and Brazilian species and also between Chilean species, as long as at least one of the parental species possessed prominent C-banding. Regarding the latter, discriminative hybridization resulted from highly repetitive species specific DNA in the heterochromatic chromosome regions of A. aurea and A. ligtu, and caused GISH banding patterns that coincided with the C-banding patterns.

  19. Calculation of two-centre two-electron integrals over Slater-type orbitals revisited. I. Coulomb and hybrid integrals

    CERN Document Server

    Lesiuk, Michał

    2014-01-01

    In this paper, which constitutes the first part of the series, we consider calculation of two-centre Coulomb and hybrid integrals over Slater-type orbitals (STOs). General formulae for these integrals are derived with no restrictions on the values of the quantum numbers and nonlinear parameters. Direct integration over the coordinates of one of the electrons leaves us with the set of overlap-like integrals which are evaluated by using two distinct methods. The first one is based on the transformation to the ellipsoidal coordinates system and the second utilises a recursive scheme for consecutive increase of the angular momenta in the integrand. In both methods simple one-dimensional numerical integrations are used in order to avoid severe digital erosion connected with the straightforward use of the alternative analytical formulae. It is discussed that the numerical integration does not introduce a large computational overhead since the integrands are well-behaved functions, calculated recursively with decent...

  20. Femtosecond timing-jitter between photo-cathode laser and ultra-short electron bunches by means of hybrid compression

    Science.gov (United States)

    Pompili, R.; Anania, M. P.; Bellaveglia, M.; Biagioni, A.; Castorina, G.; Chiadroni, E.; Cianchi, A.; Croia, M.; Di Giovenale, D.; Ferrario, M.; Filippi, F.; Gallo, A.; Gatti, G.; Giorgianni, F.; Giribono, A.; Li, W.; Lupi, S.; Mostacci, A.; Petrarca, M.; Piersanti, L.; Di Pirro, G.; Romeo, S.; Scifo, J.; Shpakov, V.; Vaccarezza, C.; Villa, F.

    2016-08-01

    The generation of ultra-short electron bunches with ultra-low timing-jitter relative to the photo-cathode (PC) laser has been experimentally proved for the first time at the SPARC_LAB test-facility (INFN-LNF, Frascati) exploiting a two-stage hybrid compression scheme. The first stage employs RF-based compression (velocity-bunching), which shortens the bunch and imprints an energy chirp on it. The second stage is performed in a non-isochronous dogleg line, where the compression is completed resulting in a final bunch duration below 90 fs (rms). At the same time, the beam arrival timing-jitter with respect to the PC laser has been measured to be lower than 20 fs (rms). The reported results have been validated with numerical simulations.

  1. Femtosecond timing-jitter between photo-cathode laser and ultra-short electron bunches by means of hybrid compression

    CERN Document Server

    Pompili, Riccardo; Bellaveglia, M; Biagioni, A; Castorina, G; Chiadroni, E; Cianchi, A; Croia, M; Di Giovenale, D; Ferrario, M; Filippi, F; Gallo, A; Gatti, G; Giorgianni, F; Giribono, A; Li, W; Lupi, S; Mostacci, A; Petrarca, M; Piersanti, L; Di Pirro, G; Romeo, S; Scifo, J; Shpakov, V; Vaccarezza, C; Villa, F

    2017-01-01

    The generation of ultra-short electron bunches with ultra-low timing-jitter relative to the photo-cathode (PC) laser has been experimentally proved for the first time at the SPARC_LAB test-facility (INFN-LNF, Frascati) exploiting a two-stage hybrid compression scheme. The first stage employs RF-based compression (velocity-bunching), which shortens the bunch and imprints an energy chirp on it. The second stage is performed in a non-isochronous dogleg line, where the compression is completed resulting in a final bunch duration below 90 fs (rms). At the same time, the beam arrival timing-jitter with respect to the PC laser has been measured to be lower than 20 fs (rms). The reported results have been validated with numerical simulations.

  2. Research Update: Relativistic origin of slow electron-hole recombination in hybrid halide perovskite solar cells

    Science.gov (United States)

    Azarhoosh, Pooya; McKechnie, Scott; Frost, Jarvist M.; Walsh, Aron; van Schilfgaarde, Mark

    2016-09-01

    The hybrid perovskite CH3NH3PbI3 (MAPI) exhibits long minority-carrier lifetimes and diffusion lengths. We show that slow recombination originates from a spin-split indirect-gap. Large internal electric fields act on spin-orbit-coupled band extrema, shifting band-edges to inequivalent wavevectors, making the fundamental gap indirect. From a description of photoluminescence within the quasiparticle self-consistent GW approximation for MAPI, CdTe, and GaAs, we predict carrier lifetime as a function of light intensity and temperature. At operating conditions we find radiative recombination in MAPI is reduced by a factor of more than 350 compared to direct gap behavior. The indirect gap is retained with dynamic disorder.

  3. Research Update: Relativistic origin of slow electron-hole recombination in hybrid halide perovskite solar cells

    Directory of Open Access Journals (Sweden)

    Pooya Azarhoosh

    2016-09-01

    Full Text Available The hybrid perovskite CH3NH3PbI3 (MAPI exhibits long minority-carrier lifetimes and diffusion lengths. We show that slow recombination originates from a spin-split indirect-gap. Large internal electric fields act on spin-orbit-coupled band extrema, shifting band-edges to inequivalent wavevectors, making the fundamental gap indirect. From a description of photoluminescence within the quasiparticle self-consistent GW approximation for MAPI, CdTe, and GaAs, we predict carrier lifetime as a function of light intensity and temperature. At operating conditions we find radiative recombination in MAPI is reduced by a factor of more than 350 compared to direct gap behavior. The indirect gap is retained with dynamic disorder.

  4. Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function

    Science.gov (United States)

    Feiner, Ron; Engel, Leeya; Fleischer, Sharon; Malki, Maayan; Gal, Idan; Shapira, Assaf; Shacham-Diamand, Yosi; Dvir, Tal

    2016-01-01

    In cardiac tissue engineering approaches to treat myocardial infarction, cardiac cells are seeded within three-dimensional porous scaffolds to create functional cardiac patches. However, current cardiac patches do not allow for online monitoring and reporting of engineered-tissue performance, and do not interfere to deliver signals for patch activation or to enable its integration with the host. Here, we report an engineered cardiac patch that integrates cardiac cells with flexible, free-standing electronics and a 3D nanocomposite scaffold. The patch exhibited robust electronic properties, enabling the recording of cellular electrical activities and the on-demand provision of electrical stimulation for synchronizing cell contraction. We also show that electroactive polymers containing biological factors can be deposited on designated electrodes to release drugs in the patch microenvironment on-demand. We expect that the integration of complex electronics within cardiac patches will eventually provide therapeutic control and regulation of cardiac function. PMID:26974408

  5. Graphene/MoS2 hybrid technology for large-scale two-dimensional electronics.

    Science.gov (United States)

    Yu, Lili; Lee, Yi-Hsien; Ling, Xi; Santos, Elton J G; Shin, Yong Cheol; Lin, Yuxuan; Dubey, Madan; Kaxiras, Efthimios; Kong, Jing; Wang, Han; Palacios, Tomás

    2014-06-11

    Two-dimensional (2D) materials have generated great interest in the past few years as a new toolbox for electronics. This family of materials includes, among others, metallic graphene, semiconducting transition metal dichalcogenides (such as MoS2), and insulating boron nitride. These materials and their heterostructures offer excellent mechanical flexibility, optical transparency, and favorable transport properties for realizing electronic, sensing, and optical systems on arbitrary surfaces. In this paper, we demonstrate a novel technology for constructing large-scale electronic systems based on graphene/molybdenum disulfide (MoS2) heterostructures grown by chemical vapor deposition. We have fabricated high-performance devices and circuits based on this heterostructure, where MoS2 is used as the transistor channel and graphene as contact electrodes and circuit interconnects. We provide a systematic comparison of the graphene/MoS2 heterojunction contact to more traditional MoS2-metal junctions, as well as a theoretical investigation, using density functional theory, of the origin of the Schottky barrier height. The tunability of the graphene work function with electrostatic doping significantly improves the ohmic contact to MoS2. These high-performance large-scale devices and circuits based on this 2D heterostructure pave the way for practical flexible transparent electronics.

  6. Interface Engineering for Organic Electronics; Manufacturing of Hybrid Inorganic-Organic Molecular Crystal Devices

    NARCIS (Netherlands)

    de Veen, P.J.

    2011-01-01

    Organic semiconductors are at the basis of Organic Electronics. Objective of this dissertation is “to fabricate high-quality organic molecular single-crystal devices”, to explore the intrinsic properties of organic semiconductors. To achieve this, the in situ fabrication of complete field-effect

  7. Flow Regime Transition in Inner Grooved Minichannel Cold Plates for Cooling Hybrid Electric Power Electronics

    Science.gov (United States)

    2013-01-01

    system to create a military base microgrid (1). There are several motivations for replacing the traditional internal combustion (IC) motors and...appropriate control electronics, several HEVs can form a microgrid with a robust source of utility power (1). This use of HEVs can reduce the need for

  8. Multiplex PCR, amplicon size and hybridization efficiency on the NanoChip electronic microarray

    DEFF Research Database (Denmark)

    Børsting, Claus; Sanchez, Juan J; Morling, Niels

    2004-01-01

    We tested the SNP typing protocol developed for the NanoChip electronic microarray by analyzing the four Y chromosome loci SRY1532, SRY8299, TAT, and 92R7. Amplicons of different lengths containing the same locus were purified and addressed to the NanoChip array and fluorescently labelled reporter...

  9. In-situ spectroscopy and nanoscale electronics in superconductor-topological insulator hybrid devices: a combined thin film growth and quantum transport study

    NARCIS (Netherlands)

    Ngabonziza, Prosper

    2016-01-01

    In this dissertation, we presented a combined thin film growth and quantum transport study on superconductor topological insulator hybrid devices. Understanding of the electronic properties of topological insulators (TIs), their preparation in high quality thin film form and their interaction with o

  10. Electron hybridization and anharmonic thermal vibration effect on structure transition of SrTiO3 at high-pressure and low-temperature

    Science.gov (United States)

    Yamanaka, Takamitsu; Ahart, Muhtar; Mao, Ho-kwang; Suzuki, Takeyuki

    2017-01-01

    We execute electron density analysis of SrTiO3 at low temperatures up 80 K and high pressures up to 11.88 GPa using X-ray single-crystal diffraction and ab initio quantum chemical molecular orbital (MO) calculation. By changing pressures, the cubic SrTiO3 with perovskite structure goes through a antiferroelastic distortion to tetragonal symmetry above the critical pressure Pc=7 GPa with c/a1 and increasing with lowering temperature. Difference Fourier (D-F) synthesis experimentally proves the residual electron densities Δρ(xyz) are associated with two different effects: electron hybridization bonding electron and anharmonic thermal vibration atoms. The d-p-π hybridization between Ti(3d) and O(2p) orbitals is confirmed in the residual electron density, which is deformed from the ideal spherical density conducted by the atomic scattering factor fi using Hartree-Fock (HF) approximation. MO calculation also reveals the electron hybridization. Anharmonic thermal vibration of atoms yields a large effect to the structure transition. Mulliken charges analysis of MO calculation indicates much smaller charges than their formal ionic charges. Their ionicity increases from cubic to tetragonal above Pc and below Tc.

  11. Microstructure, chemistry, and electronic structure of natural hybrid composites in abalone shell.

    Science.gov (United States)

    Srot, Vesna; Wegst, Ulrike G K; Salzberger, Ute; Koch, Christoph T; Hahn, Kersten; Kopold, Peter; van Aken, Peter A

    2013-05-01

    The crystal structure and chemical composition at the inorganic/inorganic and inorganic/organic interfaces in abalone shell (genus Haliotis) were investigated using advanced analytical transmission electron microscopy (TEM) methods. Electron energy-loss near-edge structures (ELNES) of Ca-M2,3, C-K, Ca-L2,3, O-K and low-loss EEL spectra acquired from aragonite and calcite are distinctly different. When comparing biogenic with inorganic material for aragonite, only minor differences in C-K fine structures could be detected. The crystal structure of the mineral bridges was confirmed by ELNES experiments. ELNES and energy-filtered TEM (EFTEM) experiments of regular and self-healed interfaces between nacreous aragonite and prismatic calcite reveal relatively rough transitions. In this work, the importance of TEM specimen preparation and specimen damage on structural features is discussed.

  12. Electronic and mechanical properties of hybrid graphene/h-BN nanoribbons

    Energy Technology Data Exchange (ETDEWEB)

    Pooja,, E-mail: j.poojaa1228@gmail.com; Sharma, Munish; Ahluwalia, P. K. [Physics Department, Himachal Pradesh University, Shimla-171005 (India); Kumar, Ashok [Physics Department, Panjab University, Chandigarh-160014 (India); Thakur, Anil [Physics Department, Govt. Collage Solan, Himachal Pradesh-173212 (India)

    2015-06-24

    The electronic and mechanical properties of one-dimensional super lattice which are composed of controlled domain size of graphene and h-BN nanoribbons with saturated and unsaturated edges are studied by means of the first-principles method. The results show that the studied zigzag- nanoribbons (Z-GBNNR) with unsaturated edges are half-metallic, while they transform into non-magnetic semiconductor on hydrogen passivations. On the other hand the band-gap of armchair-edges nanoribbons (A-GBNNR) get enhanced by the edges saturation. Furthermore, unsaturated edges A-GBNNR and saturated edges Z-GBNNR are found mechanically more stable. These results provide a fingerprint for their use in spintronics and electronics devices.

  13. Role of microstructure in the electron-hole interaction of hybrid lead halide perovskites

    Science.gov (United States)

    Grancini, Giulia; Srimath Kandada, Ajay Ram; Frost, Jarvist M.; Barker, Alex J.; de Bastiani, Michele; Gandini, Marina; Marras, Sergio; Lanzani, Guglielmo; Walsh, Aron; Petrozza, Annamaria

    2015-10-01

    Organic-inorganic metal halide perovskites have demonstrated high power conversion efficiencies in solar cells and promising performance in a wide range of optoelectronic devices. The existence and stability of bound electron-hole pairs in these materials and their role in the operation of devices with different architectures remains a controversial issue. Here we demonstrate, through a combination of optical spectroscopy and multiscale modelling as a function of the degree of polycrystallinity and temperature, that the electron-hole interaction is sensitive to the microstructure of the material. The long-range order is disrupted by polycrystalline disorder and the variations in electrostatic potential found for smaller crystals suppress exciton formation, while larger crystals of the same composition demonstrate an unambiguous excitonic state. We conclude that fabrication procedures and morphology strongly influence perovskite behaviour, with both free carrier and excitonic regimes possible, with strong implications for optoelectronic devices.

  14. Hybrid optical-electrochemical electronic nose system based on Zn-porphyrin and multi-walled carbon nanotube composite.

    Science.gov (United States)

    Kladsomboon, Sumana; Lutz, Mario; Pogfay, Tawee; Puntheeranurak, Theeraporn; Kerdcharoen, Teerakiat

    2012-07-01

    In this work, we have enhanced the capability of an e-nose system based on combined optical and electrochemical transduction within a single gas sensor array. The optical part of this e-nose is based on detection of the absorption changes of light emitted from eight light emitting diodes (LEDs) as measured by a CMOS photo-detector. The electrochemical part works by measuring the change in electrical resistivity of the sensing materials upon contact with the sample vapor. Zinc-5,10,15,20-tetra-phenyl-21H,23H-porphyrin (ZnTPP) and multi-walled carbon nanotube (MWCNT) composite was used as the sensing materials based on its good optoelectronic properties. This sensing layer was characterized by UV-Vis spectroscopy and atomic force microscope and tested with various VOC vapors. Density functional theory (DFT) calculations were performed to investigate the electronic properties and interaction energies between ZnTPP and analyte molecules. It can be clearly seen that this hybrid optical-electrochemical electronic nose system can classify the vapor of different volatile organic compounds.

  15. Electronic, structural, and thermodynamic properties of mixed actinide dioxides (U, Pu, Am) O2 from hybrid density functional theory

    Science.gov (United States)

    Ma, Li; Ray, Asok K.

    2010-03-01

    As a continuation of our studies of pure actinide metals using hybrid density functional theory,footnotetextR. Atta-Fynn and A. K. Ray, Europhysics Letters, 85, 27008-p1- p6 (2009); Chemical Physics Letters, 482, 223-227 (2009). we present here a systematic study of the electronic and geometric structure properties of mixed actinide dioxides, U0.5Pu0.5O2, U0.5Am0.5O2, Pu0.5Am0.5 O2 and U0.8Pu0.2O2. The fraction of exact Hartree-Fock exchange used was 40%. To investigate the effect of spin-orbit coupling on the ground state electronic and geometric structure properties, computations have been carried out at two theoretical levels, one at the scalar-relativistic level with no spin-orbit coupling and one at the fully relativistic level with spin-orbit coupling. Thermodynamic properties have been calculated by a coupling of first-principles calculation and lattice dynamics.

  16. Defects Energetics and Electronic Properties of Li Doped ZnO: A Hybrid Hartree-Fock and Density Functional Study

    Institute of Scientific and Technical Information of China (English)

    Xu Sun; You-song Gu; Xue-qiang Wang; Yue Zhang

    2012-01-01

    The electronic properties and stability of Li-doped ZnO with various defects have been studied by calculating the electronic structures and defect formation energies via first-principles calculations using hybrid Hartree-Fock and density functional methods.The results from formation energy calculations show that Li pair complexes have the lowest formation energy in most circumstances and they consume most of the Li content in Li doped ZnO,which make the p-type conductance hard to obtain.The formation of Li pair complexes is the main obstacle to realize p-type conductance in Li doped ZnO.However,the formation energy of Lizn decreases as environment changes from Zn-rich to O-rich and becomes more stable than that of Li-pair complexes at highly O-rich environment.Therefore,p-type conductance can be obtained by Li doped ZnO grown or post annealed in oxygen rich atmosphere.

  17. Spin-triplet electron transport in hybrid superconductor heterostructures with a composite ferromagnetic interlayer

    Energy Technology Data Exchange (ETDEWEB)

    Sheyerman, A. E., E-mail: karen@hitech.cplire.ru; Constantinian, K. Y.; Ovsyannikov, G. A.; Kislinskii, Yu. V.; Shadrin, A. V. [Russian Academy of Sciences, Kotelnikov Institute of Radio Engineering and Electronics (Russian Federation); Kalabukhov, A. V. [Chalmers University of Technology (Sweden); Khaydukov, Yu. N. [Max-Planck Institute for Solid State Research (Germany)

    2015-06-15

    Hybrid YBa{sub 2}Cu{sub 3}O{sub 7−x}/SrRuO{sub 3}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Au-Nb superconductor mesastructures with a composite manganite-ruthenate ferromagnetic interlayer are studied using electrophysical, magnetic, and microwave methods. The supercurrent in the mesastructure is observed when the interlayer thickness is much larger than the coherence length of ferromagnetic materials. The peak on the dependence of the critical current density on the interlayer material thickness corresponds to the coherence length, which is in qualitative agreement with theoretical predictions for a system with spit-triplet superconducting correlations. The magnetic-field dependence of the critical current is determined by penetration of magnetic flux quanta and by the magnetic domain structure, as well as by the field dependence of disorientation of the magnetization vectors of the layers in the composite magnetic interlayer. It is found that the supercurrent exists in magnetic fields two orders of magnitude stronger than the field corresponding to entry of a magnetic flux quantum into the mesastructure. The current-phase relation (CPR) of the supercurrent of mesastructures is investigated upon a change in the magnetic field from zero to 30 Oe; the ratio of the second CPR harmonic to the first, determined from the dependence of the Shapiro steps on the microwave radiation amplitude, does not exceed 50%.

  18. A hybrid electronic tongue for direct classification of baby liquid foods with or without gluten

    OpenAIRE

    Peres, António M.; Dias, L. G.; Veloso, Ana C. A.; Sousa, Mara E.B.C.; Machado, A.A.S.C.

    2011-01-01

    People suffering from celiac disease are gluten intolerant and inadvertent ingestion of gluten proteins must be avoided. Several techniques have been proposed to detect/quantify gluten proteins in foodstuffs: immunochemical methods, mass tandem spectrometry and polymerase chain reaction as well as gluten sensors [1]. Recently, a potentiometric electronic tongue (ET) with lipo/polymeric membranes has been used to detect gliadins, which are gluten proteins, in foodstuffs [2]. How...

  19. Realizing the Hybrid Library.

    Science.gov (United States)

    Pinfield, Stephen; Eaton, Jonathan; Edwards, Catherine; Russell, Rosemary; Wissenburg, Astrid; Wynne, Peter

    1998-01-01

    Outlines five projects currently funded by the United Kingdom's Electronic Libraries Program (eLib): HyLiFe (Hybrid Library of the Future), MALIBU (MAnaging the hybrid Library for the Benefit of Users), HeadLine (Hybrid Electronic Access and Delivery in the Library Networked Environment), ATHENS (authentication scheme), and BUILDER (Birmingham…

  20. Hybrid-PIC modeling of laser-plasma interactions and hot electron generation in gold hohlraum walls

    Science.gov (United States)

    Thoma, C.; Welch, D. R.; Clark, R. E.; Rose, D. V.; Golovkin, I. E.

    2017-06-01

    The walls of the hohlraum used in experiments at the national ignition facility are heated by laser beams with intensities ˜ 10 15 W/cm2, a wavelength of ˜ 1 / 3 μm, and pulse lengths on the order of a ns, with collisional absorption believed to be the primary heating mechanism. X-rays generated by the hot ablated plasma at the gold walls are then used to implode a target in the hohlraum interior. In addition to the collisional absorption of laser energy at the walls, non-linear laser-plasma interactions (LPI), such as stimulated Raman scattering and two plasmon decay, are believed to generate a population of supra-thermal electrons which, if present in the hohlraum, can have a deleterious effect on target implosion. We describe results of hohlraum modeling using a hybrid particle-in-cell code. To enable this work, new particle-based algorithms for a multiple-ion magneto-hydrodynamic (MHD) treatment, and a particle-based ray-tracing model were developed. The use of such hybrid methods relaxes the requirement to resolve the laser wavelength, and allows for relatively large-scale hohlraum simulations with a reasonable number of cells. But the non-linear effects which are believed to be the cause of hot electron generation can only be captured by fully kinetic simulations with good resolution of the laser wavelength. For this reason, we employ a two-tiered approach to hohlraum modeling. Large-scale simulations of the collisional absorption process can be conducted using the fast quasi-neutral MHD algorithm with fluid particle species. From these simulations, we can observe the time evolution of the hohlraum walls and characterize the density and temperature profiles. From these results, we can transition to smaller-scale highly resolved simulations using traditional kinetic particle-in-cell methods, from which we can fully model all of the non-linear laser-plasma interactions, as well as assess the details of the electron distribution function. We find that vacuum

  1. {ital s} -{ital p} Hybridization and Electron Shell Structures in Aluminum Clusters: A Photoelectron Spectroscopy Study

    Energy Technology Data Exchange (ETDEWEB)

    Li, X.; Wu, H.; Wang, X.; Wang, L. [Department of Physics, Washington State University, 2710 University Drive, Richland, Washington 99352-1671 (United States)]|[W. R. Wiley Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, MS K8-88, P.O. Box 999, Richland, Washington 99352 (United States)

    1998-08-01

    Using photoelectron spectroscopy of size-selected Al{sub x}{sup {minus}} (x=1{endash}162) clusters, we studied the electronic structure evolution of Al{sub x} and observed that the Al 3s - and 3p -derived bands evolve and broaden with cluster size and begin to overlap at Al{sub 9} . Direct spectroscopic signatures were obtained for electron shell structures with spherical shell closings at Al{sub 11}{sup {minus}} , Al{sub 13}{sup {minus}} , Al{sub 19}{sup {minus}} , Al{sub 23}{sup {minus}} , Al{sub 35}{sup {minus}} , Al{sub 37}{sup {minus}} , Al{sub 46} , Al{sub 52} , Al{sub 55}{sup {minus}} , Al{sub 56} , Al{sub 66} , and Al{sub 73}{sup {minus}} . The electron shell effect diminishes above Al{sub 75} and new spectral features appearing in Al{sub x}{sup {minus}} (x{gt}100) suggest a possible geometrical packing effect in large clusters. {copyright} {ital 1998} {ital The American Physical Society}

  2. Phylogenetic Relationship of Dendranthema (DC.) Des Moul. Revealed by Fluorescent In Situ Hybridization

    Institute of Scientific and Technical Information of China (English)

    Si-Lan DAI; Wen-Kui WANG; Mao-Xue LI; Ying-Xiu XU

    2005-01-01

    Phylogenetic relationships of the different species in the genus Dendranthema (DC.) Des Moul. were estimated based on chromosome fluorescent in situ hybridization (FISH) with 18S-26S rDNA of Arabidopsis and genomic DNA of Dendranthema as probes. The results revealed that there was no positive correlation between the number of nuclear organization region (NOR) loci and the ploidy of Dendranthema.The exact cytogenetic information of NORs about 14 operational taxonomic units (OTUs) indicated that D.vestitum (Hemsl.) Ling et Shih was closer to the cultivars than other putative species, whereas D. zawadskii (Herb.) Tzvel. was the most distinct. The ambiguously distributed signals of genomic in situ hybridization (GISH) with genomic DNA of lower ploidy species as probes suggested that different genomes among Dendranthema were mixed. The result also indicated the limitation of GISH in studies on the phylogenetic relationships of the different species in this genus Dendranthema and on the origin of cultivated chrysanthemums. Based on these results and previous research, the origin of Chinese cultivated chrysanthemum is discussed.

  3. Photon counting performance measurements of transfer electron InGaAsP photocathode hybrid photomultiplier tubes at 1064 nm wavelength

    Science.gov (United States)

    Sun, Xiaoli; Krainak, Michael A.; Hasselbrack, William B.; La Rue, Ross A.

    2007-05-01

    We report the test results of a hybrid photomultiplier tube (HPMT) with a transfer electron (TE) InGaAsP photocathode and GaAs Schottky avalanche photodiode (APD) anode. Unlike Geiger mode InGaAsP APDs, these HPMTs (also known as intensified photodiode (IPD), vacuum APD, or hybrid photodetector) operate in linear mode without the need for quenching and gating. Their greatest advantages are wide dynamic range, high speed, large photosensitive area, and potential for photon counting and analog detection dual mode operation. The photon detection efficiency we measured was 25% at 1064 nm wavelength with a dark count rate of 60,000/s at -22 degrees Celsius. The output pulse width in response to a single photon detection is about 0.9 ns. The maximum count rate was 90 Mcts/s and was limited solely by the speed of the discriminator used in the measurement (10 ns dead time). The spectral response of these devices extended from 900 to 1300 nm. We also measured the HPMT response to 60 ps laser pulses. The average output pulse amplitude increased monotonically with the input pulse energy, which suggested that we can resolve photon number in an incident pulse. The jitter of the HPMT output was found to be about 0.5 ns standard deviation and depended on bias voltage applied to the TE photocathode. To our knowledge, these HPMTs are the most sensitive non gating photon detectors at 1064 nm wavelength, and they will have many applications in laser altimeters, atmospheric lidars, and free space laser communication systems.

  4. Incorporation of the electron energy equation into the hybrid Monte Carlo - fluid model for glow discharge: the applicability and reliability of the model

    Science.gov (United States)

    Eylenceoglu, Ender; Rafatov, Ismail; Kudryavtsev, Anatoly

    2016-09-01

    A modification of the conventional hybrid Monte Carlo - fluid model for glow discharge, which incorporates the electron energy equation, is considered. In the proposed model electrons are separated into two groups, namely, high energetic fast and low energetic slow (bulk) electrons. Density profiles of ions, slow electrons, and meta-stable particles are determined from the solution of corresponding continuity equations. Fast electrons, which are responsible for ionization and excitation events in the discharge, are simulated by the Monte-Carlo method. The temperature profile for slow electrons is obtained from the solution of the energy balance equation. The transport (mobility and diffusion) coefficients as well as the reaction rates for slow electrons are determined as functions of the electron temperature. Test calculations are carried out for the direct current glow discharge in argon within two-dimensional geometry. Comparison of the computed results with those obtained from the conventional fluid and hybrid models and the experimental data is done, the applicability and reliability of the proposed model is studied in details.

  5. A hybrid approach to simulation of electron transfer in complex molecular systems

    Science.gov (United States)

    Kubař, Tomáš; Elstner, Marcus

    2013-01-01

    Electron transfer (ET) reactions in biomolecular systems represent an important class of processes at the interface of physics, chemistry and biology. The theoretical description of these reactions constitutes a huge challenge because extensive systems require a quantum-mechanical treatment and a broad range of time scales are involved. Thus, only small model systems may be investigated with the modern density functional theory techniques combined with non-adiabatic dynamics algorithms. On the other hand, model calculations based on Marcus's seminal theory describe the ET involving several assumptions that may not always be met. We review a multi-scale method that combines a non-adiabatic propagation scheme and a linear scaling quantum-chemical method with a molecular mechanics force field in such a way that an unbiased description of the dynamics of excess electron is achieved and the number of degrees of freedom is reduced effectively at the same time. ET reactions taking nanoseconds in systems with hundreds of quantum atoms can be simulated, bridging the gap between non-adiabatic ab initio simulations and model approaches such as the Marcus theory. A major recent application is hole transfer in DNA, which represents an archetypal ET reaction in a polarizable medium. Ongoing work focuses on hole transfer in proteins, peptides and organic semi-conductors. PMID:23883952

  6. Bionano donor-acceptor hybrids of porphyrin, ssDNA, and semiconductive single-wall carbon nanotubes for electron transfer via porphyrin excitation.

    Science.gov (United States)

    D'Souza, Francis; Das, Sushanta K; Zandler, Melvin E; Sandanayaka, Atula S D; Ito, Osamu

    2011-12-14

    Photoinduced electron transfer in self-assemblies of porphyrins ion-paired with ssDNA wrapped around single-wall carbon nanotubes (SWCNTs) has been reported. To accomplish the three-component hybrids, two kinds of diameter-sorted semiconducting SWCNT(n,m)s of different diameter ((n,m) = (6,5) and (7,6)) and free-base or zinc porphyrin bearing peripheral positive charges ((TMPyP(+))M (tetrakis(4-N-methylpyridyl)porphyrin); M = Zn and H(2)) serving as light-absorbing photoactive materials are utilized. The donor-acceptor hybrids are held by ion-pairing between the negatively charged phosphate groups of ssDNA on the surface of the SWCNT and the positively charged at the ring periphery porphyrin macrocycle. The newly assembled bionano donor-acceptor hybrids have been characterized by transmission electron microscopy (TEM) and spectroscopic methods. Photoinduced electron transfer from the excited singlet porphyrin to the SWCNTs directly and/or via ssDNA as an electron mediator has been established by performing systematic studies involving the steady-state and time-resolved emission as well as the transient absorption studies. Higher charge-separation efficiency has been successfully demonstrated by the selection of the appropriate semiconductive SWCNTs with the right band gap, in addition to the aid of ssDNA as the electron mediator. © 2011 American Chemical Society

  7. Low-temperature electronic transport in one-dimensional hybrid systems: Metal cluster embedded carbon nanotubes

    Science.gov (United States)

    Soldano, Caterina

    The investigation of the electronic and magnetotransport properties at low temperature in individual MWNT with embedded clusters are here presented. The majority of studies of transport in MWNT reported in literature has been carried out on arc-discharge grown tubes, generally considered "clean" and defect-free. In this project, individual MWNT grown in alumina template are used; these tubes are highly disordered compared for example to arc-discharge ones, conditions that dramatically will impact the charge transport. As-fabricated devices are in general highly resistive. A large decrease in the value of the device resistance can be achieved through a controlled and fast high-bias sweep method (HBT) across the sample. Scanning electron microscopy analysis shows that this method induces a metal (platinum) decoration of the MWNT surface as a consequence of the large amount of Joule heating developed during the sweep. Temperature dependence study (5wires. DFT calculations show that the enhancement in conductance can be explained in term of enhanced density of states around the Fermi energy due to presence of platinum on the wall. Magneto-transport measurements carried out up to a value of magnetic field up to |5|T show a clear dependence from the energy (i.e. applied bias). A nearly symmetric and monotonically increasing positive magneto-conductance is observed in the range of the applied field, confirming the presence of weak localization in the system. A small but distinct Rashba spin-orbit scattering effect in the magneto-conductance in the low-field regime (|B|<.5T) is found and attributed to the surface decoration. Electronic and magnetotransport measurements independently confirm the 1D nature of the transport in the system. "Zero-field" measurements were performed on magnetic cluster-embedded MWNT-based devices (FM-MWNT). Temperature dependence of the conductance reveals a Luttinger liquid type of behavior in the range of investigated temperatures but no

  8. Genetic Segregation and Genomic Hybridization Patterns Support an Allotetraploid Structure and Disomic Inheritance for Salix Species

    Directory of Open Access Journals (Sweden)

    Gianni Barcaccia

    2014-09-01

    Full Text Available The Salix alba L. (white willow—Salix fragilis L. (crack willow complex includes closely related polyploid species, mainly tetraploid (2n = 4x = 76, which are dioecious and hence obligate allogamous. Because little is known about the genome constitution and chromosome behavior of these pure willow trees, genetic analysis of their naturally occurring interspecific polyploid hybrids is still very difficult. A two-way pseudo-testcross strategy was exploited using single-dose AFLP markers in order to assess the main inheritance patterns of tetraploid biotypes (disomy vs. tetrasomy in segregating populations stemmed from S. alba × S. fragilis crosses and reciprocals. In addition, a genomic in situ hybridization (GISH technology was implemented in willow to shed some light on the genome structure of S. alba and S. fragilis species, and their hybrids (allopolyploidy vs. autopolyploidy. The frequency of S. alba-specific molecular markers was almost double compared to that of S. fragilis-specific ones, suggesting the phylogenetic hypothesis of S. fragilis as derivative species from S. alba-like progenitors. Cytogenetic observations at pro-metaphase revealed about half of the chromosome complements being less contracted than the remaining ones, supporting an allopolyploid origin of both S. alba and S. fragilis. Both genetic segregation and genomic hybridization data are consistent with an allotetraploid nature of the Salix species. In particular, the vast majority of the AFLP markers were inherited according to disomic patterns in S. alba × S. fragilis populations and reciprocals. Moreover, in all S. alba against S. fragilis hybridizations and reciprocals, GISH signals were observed only on the contracted chromosomes whereas the non-contracted chromosomes were never hybridized. In conclusion, half of the chromosomes of the pure species S. alba and S. fragilis are closely related and they could share a common diploid ancestor, while the rest of

  9. Hermetically sealable package for hybrid solid-state electronic devices and the like

    Science.gov (United States)

    Miller, Wilson N. (Inventor); Gray, Ormal E. (Inventor)

    1988-01-01

    A light-weight, inexpensively fabricated, hermetically sealable, repairable package for small electronic or electromechanical units, having multiple connections, is described. A molded ring frame of polyamide-imide plastic (Torlon) is attached along one edge to a base plate formed of a highly heat conducting material, such as aluminum or copper. Bores are placed through a base plate within the area of the edge surface of ring frame which result in an attachment of the ring frame to the base plate during molding. Electrical leads are molded into the ring frame. The leads are L-shaped gold-plated copper wires imbedded within widened portions of the side wall of the ring frame. Within the plastic ring frame wall the leads are bent (typically, though not necessarily at 90 deg) so that they project into the interior volume of the ring frame for connection to the solid state devices.

  10. Co-functionalized organic/inorganic hybrid ZnO nanorods as electron transporting layers for inverted organic solar cells

    Science.gov (United States)

    Ambade, Swapnil B.; Ambade, Rohan B.; Eom, Seung Hun; Baek, Myung-Jin; Bagde, Sushil S.; Mane, Rajaram S.; Lee, Soo-Hyoung

    2016-02-01

    In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM-ZnO NRs) leads to higher aggregation owing to the weaker solubility of SMs in solutions of ZnO NRs dispersed in chlorobenzene (CB). A prior addition of organic 2-(2-methoxyethoxy)acetic acid (MEA) over ZnO NRs not only inhibits aggregation of SMs over ZnO NRs, but also provides enough sites for the SM to strongly couple with the ZnO NRs to yield transparent SM-MEA-ZnO NRs hybrids that exhibited excellent capability as electron transporting layers (ETLs) in inverted organic solar cells (iOSCs) of P3HT:PC60BM bulk-heterojunction (BHJ) photoactive layers. A strongly coupled SM-MEA-ZnO NR hybrid reduces the series resistance by enhancing the interfacial area and tunes the energy level alignment at the interface between the (indium-doped tin oxide, ITO) cathode and BHJ photoactive layers. A significant enhancement in power conversion efficiency (PCE) was achieved for iOSCs comprising ETLs of SM-MEA-ZnO NRs (3.64%) advancing from 0.9% for pristine ZnO NRs, while the iOSCs of aggregated SM-ZnO NRs ETL exhibited a much lower PCE of 2.6%, thus demonstrating the potential of the co-functionalization approach. The superiority of the co-functionalized SM-MEA-ZnO NRs ETL is also evident from the highest PCE of 7.38% obtained for the iOSCs comprising BHJ of PTB7-Th:PC60BM compared with extremely poor 0.05% for non-functionalized ZnO NRs.In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM

  11. A Hybrid MCDM Model for Improving the Electronic Health Record to Better Serve Client Needs

    Directory of Open Access Journals (Sweden)

    James J. H. Liou

    2017-10-01

    Full Text Available Although the electronic health record (EHR is a promising innovation in the healthcare industry, the implementation of EHR has been relatively slow. A theoretical structure for the exploration and improvement of this usage of EHR is proposed. Incorporating the theoretical structure of TOE (technology-organization-environment, we apply the DEMATEL (decision-making trial and evaluation laboratory technique to illustrate the influence-matrix and to construct the INRM (influential network relationship map. Based on this DEMATEL influence matrix and the fundamental concepts of ANP (Analytic Hierarchy Process, we derive influential weights for the criteria. These influential weights are then combined with the modified VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje method to find ways to understand and enhance the usage of EHR technology. The outcome demonstrates that our model can not only be used for implementation of EHR technology, but can also be applied to analyze the gaps in performance between the aspiration level and present performance values in individual criterion/dimension.

  12. Electronic Tongue Based on Nanostructured Hybrid Films of Gold Nanoparticles and Phthalocyanines for Milk Analysis

    Directory of Open Access Journals (Sweden)

    Luiza A. Mercante

    2015-01-01

    Full Text Available The use of gold nanoparticles combined with other organic and inorganic materials for designing nanostructured films has demonstrated their versatility for various applications, including optoelectronic devices and chemical sensors. In this study, we reported the synthesis and characterization of gold nanoparticles stabilized with poly(allylamine hydrochloride (Au@PAH NPs, as well as the capability of this material to form multilayer Layer-by-Layer (LbL nanostructured films with metal tetrasulfonated phthalocyanines (MTsPc. Film growth was monitored by UV-Vis absorption spectroscopy, atomic force microscopy (AFM, and Fourier transform infrared spectroscopy (FTIR. Once LbL films have been applied as active layers in chemical sensors, Au@PAH/MTsPc and PAH/MTsPc LbL films were used in an electronic tongue system for milk analysis regarding fat content. The capacitance data were treated using Principal Component Analysis (PCA, revealing the role played by the gold nanoparticles on the LbL films electrical properties, enabling this kind of system to be used for analyzing complex matrices such as milk without any prior pretreatment.

  13. Surface Electronic Structure of Hybrid Organo Lead Bromide Perovskite Single Crystals

    KAUST Repository

    Komesu, Takashi

    2016-08-24

    The electronic structure and band dispersion of methylammonium lead bromide, CH3NH3PbBr3, has been investigated through a combination of angle-resolved photoemission spectroscopy (ARPES) and inverse photoemission spectroscopy (IPES), as well as theoretical modeling based on density functional theory. The experimental band structures are consistent with the density functional calculations. The results demonstrate the presence of a dispersive valence band in MAPbBr3 that peaks at the M point of the surface Brillouin zone. The results also indicate that the surface termination of the CH3NH3PbBr3 is the methylammonium bromide (CH3NH3Br) layer. We find our results support models that predict a heavier hole effective mass in the region of -0.23 to -0.26 me, along the Γ (surface Brillouin center) to M point of the surface Brillouin zone. The surface appears to be n-type as a result of an excess of lead in the surface region. © 2016 American Chemical Society.

  14. Layer-by-layer assembled multilayer TiO(x) for efficient electron acceptor in polymer hybrid solar cells.

    Science.gov (United States)

    Kang, Hyunbum; Lee, Chanwoo; Yoon, Sung Cheol; Cho, Chul-Hee; Cho, Jinhan; Kim, Bumjoon J

    2010-11-16

    We demonstrate that TiO(x) nanocomposite films fabricated using electrostatic layer-by-layer (LbL) assembly improve the power conversion efficiency of photovoltaic cells compared to conventional TiO(x) films fabricated via the sol-gel process. For this study, titanium precursor/poly(allylamine hydrochloride) (PAH) multilayer films were first deposited onto indium tin oxide-coated glass to produce TiO(x) nanocomposites (TiO(x)NC). The specific effect of the LbL processed TiO(x) on photovoltaic performance was investigated using the planar bilayer TiO(x)NC and highly regioregular poly(3-hexylthiophene) (P3HT) solar cells, and the P3HT/LbL TiO(x)NC solar cells showed a dramatic increase in power efficiency, particularly in terms of the short current density and fill factor. The improved efficiency of this device is mainly due to the difference in the chemical composition of the LbL TiO(x)NC films, including the much higher Ti(3+)/Ti(4+) ratio and the highly reactive facets of crystals as demonstrated by XPS and XRD measurement, thus enhancing the electron transfer between electron donors and acceptors. In addition, the grazing incidence wide-angle X-ray scattering (GIWAXS) study revealed the presence of more highly oriented P3HT stacks parallel to the substrate on the LbL TiO(x)NC film compared to those on the sol-gel TiO(x) films, possibly influencing the hole mobility of P3HT and the energy transfer near and at the interface between the P3HT and TiO(x) layers. The results of this study demonstrate that this approach is a promising one for the design of hybrid solar cells with improved efficiency.

  15. Heterogeneous oligonucleotide-hybridization assay based on hot electron-induced electrochemiluminescence of a rhodamine label at oxide-coated aluminum and silicon electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Spehar-Deleze, Anna-Maria [Laboratory of Sensors, Actuators and Microsystems, Institute of Microtechnology, University of Neuchatel, Rue Jaquet-Droz 1, CH-2007 Neuchatel (Switzerland) and Laboratory of Inorganic and Analytical Chemistry, Helsinki University of Technology, Kemistintie 1, FIN-02015 HUT (Finland)]. E-mail: anna-maria.spehar@unine.ch; Suomi, Johanna [Laboratory of Inorganic and Analytical Chemistry, Helsinki University of Technology, Kemistintie 1, FIN-02015 HUT (Finland); Jiang Qinghong [Laboratory of Inorganic and Analytical Chemistry, Helsinki University of Technology, Kemistintie 1, FIN-02015 HUT (Finland); Rooij, Nico de [Laboratory of Sensors, Actuators and Microsystems, Institute of Microtechnology, University of Neuchatel, Rue Jaquet-Droz 1, CH-2007 Neuchatel (Switzerland); Koudelka-Hep, Milena [Laboratory of Sensors, Actuators and Microsystems, Institute of Microtechnology, University of Neuchatel, Rue Jaquet-Droz 1, CH-2007 Neuchatel (Switzerland); Kulmala, Sakari [Laboratory of Inorganic and Analytical Chemistry, Helsinki University of Technology, Kemistintie 1, FIN-02015 HUT (Finland)

    2006-07-28

    This paper describes a heterogeneous oligonucleotide-hybridization assay based on hot electron-induced electrochemiluminescence (HECL) of a rhodamine label. Thin oxide-film coated aluminum and silicon electrodes were modified with an aminosilane layer and derivatized with short, 15-mer oligonucleotides via diisothiocyanate coupling. Target oligonucleotides were conjugated with tetramethylrhodamine (TAMRA) dye at their amino modified 5' end and hybridization was detected using HECL of TAMRA. Preliminary results indicate sensitivity down to picomolar level and low nonspecific adsorption. The sensitivity was better on oxide-coated silicon compared to oxide-coated aluminum electrodes and two-base pair mismatched hybrids were successfully discriminated. The experimental results presented here might be useful for the design of disposable electrochemiluminescent DNA biosensors.

  16. The nature of electronic excitations at the metal-bioorganic interface illustrated on histidine-silver hybrids.

    Science.gov (United States)

    Sanader, Željka; Mitrić, Roland; Bonačić-Koutecký, Vlasta; Bellina, Bruno; Antoine, Rodolphe; Dugourd, Philippe

    2014-01-21

    We present a joint theoretical and experimental study of the structure selective optical properties of cationic and anionic histidine-silver complexes with Ag and Ag3 which were prepared in the gas phase using mass spectroscopy coupled to electrospray ion source. Our TDDFT calculations provide general insight into the nature of electronic excitations at the metal-bioorganic interface that involve π-π* excitation within bioorganic subunits, charge transfer between two subunits and intrametallic excitations. The binding of silver to histidine, one of the most important amino acids, induces red shift in the optical absorption of protonated histidine particularly for anionic species. The presence of the smallest metallic subunit Ag3 increases the intensity of low energy transitions of histidine illustrating a metal cluster-induced enhancement of absorption of biomolecules in hybrid systems. Comparison of calculated absorption spectra with experimental photofragmentation yield provides structural assignment of the measured spectroscopic patterns. Our findings may serve to establish silver-labeling as the tool for the detection of histidine or histidine-tagged proteins.

  17. New adders using hybrid circuit consisting of three-gate single-electron transistors (TG-SETs) and MOSFETs.

    Science.gov (United States)

    Yu, YunSeop; Choi, JungBum

    2007-11-01

    A half-adder (HA) and a full-adder (FA) using hybrid circuits combining three-gate single-electron transistors (TG-SETs) with metal-oxide-semiconductor field-effect-transistors (MOSFETs) are proposed. The proposed HA consists of three TG-SETs, two enhanced-mode NMOSFETs, and two depletion-mode NMOSFETs, and the proposed FA consists of eight TG-SETs, two enhanced-mode NMOSFETs, and two depletion-mode NMOSFETs. The complexities in the HA and the FA are 7 and 12, respectively, and the worst-case delays in the HA and the FA are 1.48 ns and 2.25 ns, respectively. Compared with the conventional CMOS FA with 0.35 microm technology, the proposed FA can be constructed with 0.43 of devices, and can operate with 3.5 of worst-case delay, 1/534 of average power consumption, and 1/152 of power-delay-product (PDP). The proposed HA and FA can be operated as a half-subtractor (HS) and a full-subtractor (FS) in the case when the levels of the control gates in the HA and the FA are fitly determined. The basic operations of the proposed HA and the proposed FA have been successfully confirmed through SPICE circuit simulation based on the physical device model of TG-SETs.

  18. Effects of nonmetal doping on electronic structures of NaNbO3 based on hybrid density functional calculation

    Science.gov (United States)

    Shi, Haifeng; Lan, Benyue; Zhang, Chengliang; Ye, Enjia; Nie, Yanguang; Bian, Baoan

    2016-10-01

    The influences of a series of anion doping on the electronic structures of sodium niobate (NaNbO3) have been systematically investigated by density functional theory (DFT) calculations with the hybrid B3LYP functional. As for B(C,P)-doped NaNbO3, the isolated B 2p (C 2p, P 3p) states were formed above the valence band maximum (VBM) of NaNbO3, which were too weak to mix with O 2p states and thus produced band gap narrowing. While the band gap of NaNbO3 was slightly narrowed after F doping. As for S-doped NaNbO3, the S 3p states mixed with O 2p states well and thus reduced the band gap energy. According to the calculation results, we tentatively put forward that S doping would be appropriate for single anion doping NaNbO3, while the B(C,P) elements would be suitable candidates for co-doping NaNbO3.

  19. The ethnic identity rheology under multicultural context--An analysis of Gish Jen's Novel"Mona in the promised land"%多元文化语境下少数族裔的身份流变性——试析任碧莲小说《梦娜在希望之乡》

    Institute of Scientific and Technical Information of China (English)

    陈丹; 丛丽; 林昊

    2012-01-01

      本文从“身份”这个概念入手,对任碧莲小说《梦娜在希望之乡》的主要人物身份发生的变化进行分析,旨在揭示任碧莲创作思想中身份流变性的观点。%  This article from the concept of"identity", to analyze the main character identity changes on Gish Jen 's Novel"Mona in the promised land", aiming to reveal the identity rheology in Gish Jen's creative thought.

  20. Characteristics of electron cyclotron resonance plasma formed by lower hybrid current drive grill antenna

    Indian Academy of Sciences (India)

    P K Sharma; S L Rao; K Mishra; R G Trivedi; D Bora

    2008-03-01

    A 3.7 GHz system, which is meant for LHCD experiments on ADITYA tokamak, is used for producing ECR discharge. The ECR discharge is produced by setting the appropriate resonance magnetic field of 0.13 T, with hydrogen at a fill pressure of about 5 × 10-5 Torr. The RF powe r, up to 10 kW (of which ∼ 50% is reflected back), with a typical pulse length of 50 ms, is injected into the vacuum chamber of the ADITYA tokamak by a LHCD grill antenna and is used for plasma formation. The average coupled RF power density (the RF power/a typical volume of the plasma) is estimated to be ∼ 5 kW/m3. When the ECR appears inside the tokamak chamber for the given pumping frequency ( = 3.7 GHz) a plasma with a density () ∼ 4 × 1016 m-3 and electron temperature ∼ 8 eV is produced. The density and temperature during the RF pulse are measured by sets of Langmuir probes, located toroidally, on either side of the antenna. signals are also monitored to detect ionization. An estimate of density and temperature based on simple theoretical calculation agrees well with our experimental measurements. The plasma produced by the above mechanism is further used to characterize the ECR-assisted low voltage Ohmic start-up discharges. During this part of the experiments, Ohmic plasma is formed using capacitor banks. The plasma loop voltage is gradually decreased, till the discharge ceases to form. The same is repeated in the presence of ECR-formed plasma (RF pre-ionization), formed 10 ms prior to the loop voltage. We have observed that (with LHCD-induced) ECR-assisted Ohmic start-up discharges is reliably and repeatedly obtained with reduced loop voltage requirement and breakdown time decreases substantially. The current ramp-up rates also decrease with reduced loop voltage operation. These studies established that ECR plasma formed with LHCD system exhibits similar characteristics as reported earlier by dedicated ECR systems. This experiment also addresses the issue of whether ECR plasma

  1. Organic electronic materials: Recent advances in the dft description of the ground and excited states using tuned range-separated hybrid functionals

    KAUST Repository

    Körzdörfer, Thomas

    2014-11-18

    Density functional theory (DFT) and its time-dependent extension (TD-DFT) are powerful tools enabling the theoretical prediction of the ground- and excited-state properties of organic electronic materials with reasonable accuracy at affordable computational costs. Due to their excellent accuracy-to-numerical-costs ratio, semilocal and global hybrid functionals such as B3LYP have become the workhorse for geometry optimizations and the prediction of vibrational spectra in modern theoretical organic chemistry. Despite the overwhelming success of these out-of-the-box functionals for such applications, the computational treatment of electronic and structural properties that are of particular interest in organic electronic materials sometimes reveals severe and qualitative failures of such functionals. Important examples include the overestimation of conjugation, torsional barriers, and electronic coupling as well as the underestimation of bond-length alternations or excited-state energies in low-band-gap polymers.In this Account, we highlight how these failures can be traced back to the delocalization error inherent to semilocal and global hybrid functionals, which leads to the spurious delocalization of electron densities and an overestimation of conjugation. The delocalization error for systems and functionals of interest can be quantified by allowing for fractional occupation of the highest occupied molecular orbital. It can be minimized by using long-range corrected hybrid functionals and a nonempirical tuning procedure for the range-separation parameter.We then review the benefits and drawbacks of using tuned long-range corrected hybrid functionals for the description of the ground and excited states of π-conjugated systems. In particular, we show that this approach provides for robust and efficient means of characterizing the electronic couplings in organic mixed-valence systems, for the calculation of accurate torsional barriers at the polymer limit, and for the

  2. Synthesis, and crystal and electronic structure of sodium metal phosphate for use as a hybrid capacitor in non-aqueous electrolyte.

    Science.gov (United States)

    Sundaram, Manickam Minakshi; Watcharatharapong, Teeraphat; Chakraborty, Sudip; Ahuja, Rajeev; Duraisamy, Shanmughasundaram; Rao, Penki Tirupathi; Munichandraiah, Nookala

    2015-12-14

    Energy storage devices based on sodium have been considered as an alternative to traditional lithium based systems because of the natural abundance, cost effectiveness and low environmental impact of sodium. Their synthesis, and crystal and electronic properties have been discussed, because of the importance of electronic conductivity in supercapacitors for high rate applications. The density of states of a mixed sodium transition metal phosphate (maricite, NaMn(1/3)Co(1/3)Ni(1/3)PO4) has been determined with the ab initio generalized gradient approximation (GGA)+Hubbard term (U) method. The computed results for the mixed maricite are compared with the band gap of the parent NaFePO4 and the electrochemical experimental results are in good agreement. A mixed sodium transition metal phosphate served as an active electrode material for a hybrid supercapacitor. The hybrid device (maricite versus carbon) in a non-aqueous electrolyte shows redox peaks in the cyclic voltammograms and asymmetric profiles in the charge-discharge curves while exhibiting a specific capacitance of 40 F g(-1) and these processes are found to be quasi-reversible. After long term cycling, the device exhibits excellent capacity retention (95%) and coulombic efficiency (92%). The presence of carbon and the nanocomposite morphology, identified through X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) studies, ensures the high rate capability while offering possibilities to develop new cathode materials for sodium hybrid devices.

  3. Direct spectroscopic evidence of ultrafast electron transfer from a low band gap polymer to CdSe quantum dots in hybrid photovoltaic thin films.

    Science.gov (United States)

    Couderc, Elsa; Greaney, Matthew J; Brutchey, Richard L; Bradforth, Stephen E

    2013-12-11

    Ultrafast transient absorption spectroscopy is used to study charge transfer dynamics in hybrid films composed of the low band gap polymer PCPDTBT and CdSe quantum dots capped with tert-butylthiol ligands. By selectively exciting the polymer, a spectral signature for electrons on the quantum dots appears on ultrafast time scales (≲ 65 fs), which indicates ultrafast electron transfer. From this time scale, the coupling between the polymer chains and the quantum dots is estimated to be J ≳ 17 meV. The reduced quantum dot acceptors exhibit an unambiguous spectral bleach signature, whose amplitude allows for the first direct calculation of the absolute electron transfer yield in a hybrid solar cell (82 ± 5%). We also show that a limitation of the hybrid system is rapid and measurable geminate recombination due to the small separation of the initial charge pair. The fast recombination is consistent with the internal quantum efficiency of the corresponding solar cell. We therefore have identified and quantified a main loss mechanism in this type of third generation solar cell.

  4. Application of in situ Hybridization in Plant Molecular Cytogenetics Research%DNA分子原位杂交(in situ hybridization)在植物分子细胞遗传学研究中的应用

    Institute of Scientific and Technical Information of China (English)

    别同德; 张伯桥; 高德荣; 程顺和; 马谈斌

    2008-01-01

    DNA分子原位杂交(in situ hybridization,ISH)是植物分子细胞遗传学研究的重要工具.简要回顾了DNA分子原位杂交的起源和发展,详细综述了基因组原位杂交(genomic in situ hybridization, GISH)在植物细胞遗传学研究中的应用以及荧光原位杂交(Fluorescence in situ hybridization, FISH)在植物物理作图和染色体识别中的应用.还介绍了Fiber-FISH、BAC-FISH以及Immuno-FISH等新兴技术,最后对FISH技术进行了展望.

  5. FY1995 study of electronic coservice project which used Optical-Smart Hybrid Card; 1995 nendo hikari IC hybrid card wo mochiite katei kara ukeru gyosei denshika service project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    As one of advanced multi media service, We can think about electoronization-network changing of the public coservice. that the official system provides. It can be expected to improve the life environment for a nation by the electronization. The purpose of this research is to clarify the off-line administration of an individual information and the issue on security. We constructed the experimental system using the Internet and Optical-IC hybrid card that an individual information is administrated. The system provides the following services. (1) On-stop moving service (2) Electronic certificate publishing service (3) Electronic ticket publishing service We have mounted client terminals at Fuchu city hall, Yokohama city hall, and Keio University, and made field experimentation. (NEDO)

  6. Kinetic Cascade in Solar-wind Turbulence: 3D3V Hybrid-kinetic Simulations with Electron Inertia

    Science.gov (United States)

    Cerri, Silvio Sergio; Servidio, Sergio; Califano, Francesco

    2017-09-01

    Understanding the nature of the turbulent fluctuations below the ion gyroradius in solar-wind (SW) turbulence is a great challenge. Recent studies have been mostly in favor of kinetic Alfvén wave (KAW)-type fluctuations, but other kinds of fluctuations with characteristics typical of magnetosonic, whistler, and ion-Bernstein modes could also play a role depending on the plasma parameters. Here, we investigate the properties of the subproton-scale cascade with high-resolution hybrid-kinetic simulations of freely decaying turbulence in 3D3V phase space, including electron inertia effects. Two proton plasma beta are explored: the “intermediate” β p = 1 and “low” β p = 0.2 regimes, both typically observed in the SW and corona. The magnetic energy spectum exhibits {k}\\perp -8/3 and {k}\\parallel -7/2 power laws at β p = 1, while they are slightly steeper at β p = 0.2. Nevertheless, both regimes develop a spectral anisotropy consistent with {k}\\parallel ∼ {k}\\perp 2/3 at {k}\\perp {ρ }p> 1 and pronounced small-scale intermittency. In this context, we find that the kinetic-scale cascade is dominated by KAW-like fluctuations at β p = 1, whereas the low-β case presents a more complex scenario suggesting the simultaneous presence of different types of fluctuations. In both regimes, however, a possible role of the ion-Bernstein-type fluctuations at the smallest scales cannot be excluded.

  7. Electronic structures and phonon free energies of LaCoO3 using hybrid-exchange density functional theory

    Science.gov (United States)

    Mukhopadhyay, S.; Finnis, M. W.; Harrison, N. M.

    2013-03-01

    Hybrid-exchange density functional theory has been used to model the electronic structure of LaCoO3. Based on a rhombohedral unit cell of R3¯c symmetry containing two Co atoms we find a mixed spin phase, comprising alternating low and high spin Co+3 ions, with a total energy at 0 K just 57 meV per formula unit above that of a nonmagnetic semiconducting ground state. In the mixed spin phase the high-spin Co+3 ions have spin moments of 3.1μB and the state is insulating with a band gap of 2.2 eV. Our calculations suggest that the effective on-site Coulomb repulsion energy Ueff on Co+3 ions is spin dependent. The Ueff on Co+3 ions is 7.1 eV and 8.5 eV for the nonmagnetic ground state and for the magnetic high spin state, respectively. For the mixed spin state, two different Ueff are estimated for two Co+3 ions in the unit cell having different spin states, 8.0 eV for the high-spin Co+3 ion and 7.0 eV for the low-spin Co+3 ion. An estimate of the harmonic phonon free energy suggests that this mixed spin phase would become the more stable phase as the temperature increases, which is consistent with experimental evidence. An alternative intermediate spin state is higher in energy at all temperatures.

  8. The electronic structure of organic-inorganic hybrid compounds : (NH4)(2)CuCl4, (CH3NH3)(2)CuCl4 and (C2H5NH3)(2)CuCl4

    NARCIS (Netherlands)

    Zolfaghari, P.; de Wijs, G. A.; de Groot, R. A.

    2013-01-01

    Hybrid organic-inorganic compounds are an intriguing class of materials that have been experimentally studied over the past few years because of a potential broad range of applications. The electronic and magnetic properties of three organic-inorganic hybrid compounds with compositions (NH4)(2)CuCl4

  9. The electronic structure of organic-inorganic hybrid compounds : (NH4)(2)CuCl4, (CH3NH3)(2)CuCl4 and (C2H5NH3)(2)CuCl4

    NARCIS (Netherlands)

    Zolfaghari, P.; de Wijs, G. A.; de Groot, R. A.

    2013-01-01

    Hybrid organic-inorganic compounds are an intriguing class of materials that have been experimentally studied over the past few years because of a potential broad range of applications. The electronic and magnetic properties of three organic-inorganic hybrid compounds with compositions

  10. Asymmetric somatic hybridization between wheat (Triticum aestivum) and Avena sativa L.

    Institute of Scientific and Technical Information of China (English)

    向凤宁; 夏光敏; 陈惠民

    2003-01-01

    Protoplasts from cell suspensions of young-embryo-derived calli, whichwere non- regenerable for long-term subculture and protoplasts from embryogenic calli with the regeneration capacity of 75% of the same wheat Jinan 177, were mixed as recipient. Protoplasts from embryogenic calli of Avena sativa (with the regeneration capacity of less than 10%) irradiated with UV at an intensity of300 μW/cm2 for 30 s, 1 min, 2 min, 3 min, 5 min were used as the donor. Protoplasts of the recipient and the donor were fused by PEG method. Many calli and normal green plants were regenerated at high frequency, and were verified as somatic hybrids by chromosome counting, isozyme, 5S rDNA spacer sequence analysis and GISH (genomic in situ hybridization). Fusion combination between protoplasts either from the cell suspensions or from the calli and UV-treated Avena sativa protoplasts could not regenerate green plants.

  11. Genetic Relationships Among Five Basic Genomes St, E, A, B and D in Triticeae Revealed by Genomic Southern and in situ Hybridization

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The St and E are two important basic genomes in the perennial tribe Triticeae (Poaceae). They exist in many perennial species and are very closely related to the A, B and D genomes of bread wheat (Triticum aestivum L.). Genomic Southern hybridization and genomic in situ hybridization (GISH) were used to analyze the genomic relationships between the two genomes (St and E) and the three basic genomes (A, B and D) of T. aestivum. The semi-quantitative analysis of the Southern hybridization suggested that both St and E genomes are most closely related to the D genome, then the A genome, and relatively distant to the B genome. GISH analysis using St and E genomic DNA as probes further confirmed the conclusion.St and E are the two basic genomes of Thinopyrum ponticum (StStEeEbEx) and Th. intermedium (StEeEb), two perennial species successfully used in wheat improvement. Therefore, this paper provides a possible answer as to why most of the spontaneous wheat- Thinopyrum translocations and substitutions usually happen in the D genome, some in the A genome and rarely in the B genome. This would develop further use of alien species for wheat improvement, especially those containing St or E in their genome components.

  12. Effect of Rashba and Dresselhaus Spin-Orbit Couplings on Electron Spin Polarization in a Hybrid Magnetic-Electric Barrier Nanostructure

    Science.gov (United States)

    Yang, Shi-Peng; Lu, Mao-Wang; Huang, Xin-Hong; Tang, Qiang; Zhou, Yong-Long

    2017-04-01

    A theoretical study has been carried out on the spin-dependent electron transport in a hybrid magnetic-electric barrier nanostructure with both Rashba and Dresselhaus spin-orbit couplings, which can be experimentally realized by depositing a ferromagnetic strip and a Schottky metal strip on top of a semiconductor heterostructure. The spin-orbit coupling-dependent transmission coefficient, conductance, and spin polarization are calculated by solving the Schrödinger equation exactly with the help of the transfer-matrix method. We find that both the magnitude and sign of the electron spin polarization vary strongly with the spin-orbit coupling strength. Thus, the degree of electron spin polarization can be manipulated by properly adjusting the spin-orbit coupling strength, and such a nanosystem can be employed as a controllable spin filter for spintronics applications.

  13. Design Features of a Planar Hybrid/Permanent Magnet Strong Focusing Undulator for Free Electron Laser (FEL) And Synchrotron Radiation (SR) Applications

    Energy Technology Data Exchange (ETDEWEB)

    Tatchyn, Roman; /SLAC

    2011-09-09

    Insertion devices for Angstrom-wavelength Free Electron Laser (FEL) amplifiers driven by multi-GeV electron beams generally require distributed focusing substantially stronger than their own natural focusing fields. Over the last several years a wide variety of focusing schemes and configurations have been proposed for undulators of this class, ranging from conventional current-driven quadrupoles external to the undulator magnets to permanent magnet (PM) lattices inserted into the insertion device gap. In this paper we present design studies of a flexible high-field hybrid/PM undulator with strong superimposed planar PM focusing proposed for a 1.5 Angstrom Linac Coherent Light Source (LCLS) driven by an electron beam with a 1 mm-mr normalized emittance. Attainable field parameters, tuning modes, and potential applications of the proposed structure are discussed.

  14. A Novel Hybrid Ultramicrotomy/FIB-SEM Technique: Preparation of Serial Electron-Transparent Thin Sections of a Hayabusa Grain

    Science.gov (United States)

    Berger, Eve L.; Keller, Lindsay P.

    2014-01-01

    The Japanese space agency's (JAXA) Hayabusa mission returned the first particulate samples (typically SEM). Using a diamond trim knife, the epoxy surrounding the grain is removed on 3 sides (to within a few microns of the grain); the depth of material removed extends well below the bottom of the particle. The sample is attached to an SEM pin mount, the epoxy coated with conductive paint, and the entire assembly coated with approx. 40nm of carbon to eliminate sample charging during FIB work. A protective carbon cap is placed according to the plan for the 15 FIB sections. The central 'spine' of the cap runs perpendicular to the front of the sample, and the 'ribs' protruding from either side run parallel. Each rib indicates the location of a planned FIB section, and the spine contains the final two planned sections. We use a cap with a 4 micron-wide spine and 2micron-wide ribs that have ?3.5 micron of space between them (narrower cuts result in too much re-deposition of material inside the trenches). Using a 30kV, 3nA ion-beam we expose the front surface of the grain and commence milling trenches between sections. Rather than using the typical C-cut to prepare the sample for lift-out, an L-cut is used instead, leaving the sample connected by an interior tab. tab. Sections are lifted out, attached to TEM grids and thinned to electron transparency. TEM analyses show that our hybrid technique preserves both interior and edge features, including surface modifications from exposure to the space environment, such as damaged rims that form in response to solar wind implantation effects and adhering grains. In addition, the FIB sections provide larger areas that are free of fractures and chatter effects in comparison to the microtome thin sections, thus enabling more accurate measurements of solar flare particle track densities that are used to determine the surface exposure age of the particles.

  15. A Comparative Analysis of Different Finishing and Polishing Devices on Nanofilled, Microfilled, and Hybrid Composite: A Scanning Electron Microscopy and Profilometric Study

    Science.gov (United States)

    Yadav, Rishi D; Raisingani, Deepak; Mathur, Rachit

    2016-01-01

    The continuous development of esthetically acceptable adhesive restorative material has made a variety of tooth-colored materials available for clinical use. The advent of visible light polymerizing resin and the use of finer filler particles permit resin composites to be polished to higher degree. The effect of polishing systems on surface finish has been reported to be material-dependent, and the effectiveness of these systems was mostly product-dependent. Hence, the purpose of this study was to evaluate the efficiency of finishing and polishing systems on the surface roughness of nanofilled, microfilled, and hybrid composite restorative materials available in the market. How to cite this article Yadav RD, Raisingani D, Jindal D, Mathur R. A Comparative Analysis of Different Finishing and Polishing Devices on Nanofilled, Microfilled, and Hybrid Composite: A Scanning Electron Microscopy and Profilometric Study. Int J Clin Pediatr Dent 2016;9(3):201-208. PMID:27843250

  16. Self-consistent kinetic simulations of lower hybrid drift instability resulting in electron current driven by fusion products in tokamak plasmas

    CERN Document Server

    Cook, J W S; Dendy, R O

    2010-01-01

    We present particle-in-cell (PIC) simulations of minority energetic protons in deuterium plasmas, which demonstrate a collective instability responsible for emission near the lower hybrid frequency and its harmonics. The simulations capture the lower hybrid drift instability in a regime relevant to tokamak fusion plasmas, and show further that the excited electromagnetic fields collectively and collisionlessly couple free energy from the protons to directed electron motion. This results in an asymmetric tail antiparallel to the magnetic field. We focus on obliquely propagating modes under conditions approximating the outer mid-plane edge in a large tokamak, through which there pass confined centrally born fusion products on banana orbits that have large radial excursions. A fully self-consistent electromagnetic relativistic PIC code representing all vector field quantities and particle velocities in three dimensions as functions of a single spatial dimension is used to model this situation, by evolving the in...

  17. Meiotic behaviour of individual chromosomes in allotriploid Alstroemeria hybrids.

    Science.gov (United States)

    Kamstra, S A; de Jong, J H; Jacobsen, E; Ramanna, M S; Kuipers, A G J

    2004-07-01

    Chromosome association and chiasma formation were studied in pollen mother cells at metaphase I of four allotriplod BC1 plants (2n=3x=24) obtained from the backcross of the hybrid Alstroemeria aurea x A. inodora with its parent A. inodora. We distinguished the chromosomes of both parental species by genomic in situ hybridization (GISH), whereas the individual chromosomes were identified on the basis of their multicolour FISH banding patterns obtained after a second hybridization with two species-specific satellite repeats as probes. All the four BC1 plants possessed two genomes of A. inodora and one of A. aurea. Variable numbers of recombinant chromosomes, resulting from meiotic recombination in the interspecific hybrid, were present in these plants. The homologous A. inodora chromosomes generally formed bivalents, leaving the homoeologous A. aurea chromosomes unassociated. High frequencies of trivalents were observed for the chromosome sets that contained recombinant chromosomes, even when the recombinant segments were small. Chromosome associations in the trivalents were restricted to homologous segments. The implications of the absence of homoeologous chromosome pairing on gamete constitution and prospects for introgression in Alstroemeria are discussed.

  18. Bipolar resistive switching properties of Ti-CuO/(hexafluoro-hexa-peri-hexabenzocoronene)-Cu hybrid interface device: Influence of electronic nature of organic layer

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Bharti; Mehta, B. R.; Varandani, Deepak [Thin Film Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016 (India); Govind [Surface Physics Group, National Physical Laboratory (CSIR), New Delhi-110012 (India); Narita, A.; Feng, X.; Muellen, K. [Max-Planck Institute for Polymer Research, D-55128 Mainz (Germany)

    2013-05-28

    This study reports the change in the structural and junction properties of Ti-CuO-Cu structure on incorporation of a 2-dimensional (2D) organic layer comprising of n-type hexafluoro-hexa-peri-hexabenzocoronene (6F-HBC). A bipolar resistive switching is observed in the device having interface between sputter deposited copper oxide (CuO) and vacuum sublimated 6F-HBC hybrid interface. The CuO/6F-HBC hybrid interface exhibits rectifying I-V characteristics in complete contrast to the ohmic and rectifying characteristics of junctions based on individual 6F-HBC and CuO layers. Large change in resistive switching property from unipolar resistive switching in CuO/HBC to bipolar resistive switching in CuO/6F-HBC interface was observed. At the CuO/6F-HBC interface, C1s peak corresponding to fluorinated carbon is shifted by 0.68 eV towards higher binding energy (BE) side and O1s peak due to non-lattice oxygen is shifted by 0.6 eV towards lower BE, confirming the interaction of O{sup 2-} ion in CuO with fluorinated carbon atoms in 6F-HBC at the hybrid interface. Correlation between conductive atomic force microscopy images and atomic force microscopy topography images, I-V characteristics in conducting, non-conducting, and pristine regions along with x-ray photoelectron spectroscopy results establishes the important role of hybrid interface to determining the resistive switching properties. This study demonstrates that the resistive switching and interface properties of a hybrid device based on inorganic and organic 2D materials can be modified by changing the electronic properties of organic layer by attaching suitable functional groups.

  19. Particle-in-cell simulations of an alpha channeling scenario: electron current drive arising from lower hybrid drift instability of fusion-born ions

    Science.gov (United States)

    Cook, James; Chapman, Sandra; Dendy, Richard

    2010-11-01

    Particle-in-cell (PIC) simulations of fusion-born protons in deuterium plasmas demonstrate a key alpha channeling phenomenon for tokamak fusion plasmas. We focus on obliquely propagating modes at the plasma edge, excited by centrally born fusion products on banana orbits, known to be responsible for observations of ion cyclotron emission in JET and TFTR. A fully self-consistent electromagnetic 1D3V PIC code evolves a ring-beam distribution of 3MeV protons in a 10keV thermal deuterium-electron plasma with realistic mass ratio. A collective instability occurs, giving rise to electromagnetic field activity in the lower hybrid range of frequencies. Waves spontaneously excited by this lower hybrid drift instability undergo Landau damping on resonant electrons, drawing out an asymmetric tail in the distribution of electron parallel velocities, which constitutes a net current. These simulations demonstrate a key building block of some alpha channeling scenarios: the direct collisionless coupling of fusion product energy into a form which can help sustain the equilibrium of the tokamak.

  20. Ginsenoside Rb1 in asymmetric somatic hybrid calli of Daucus carota with Panax quinquefolius.

    Science.gov (United States)

    Han, Lu; Zhou, Chuanen; Shi, Junying; Zhi, Daying; Xia, Guangmin

    2009-04-01

    American ginseng (Panax quinquefolius L.) is one of the most valuable herbs in the world. Its major active components are ginsenosides. In order to produce ginsenoside heterogeneously, somatic hybridization, a novel approach for genetic introgression, was employed in this study. Protoplasts derived from respective calli of carrot (Daucus carota var. sativus Hoffm.) and American ginseng (P. quinquefolius L.) were used as the fusion partners. Hybrid calli derived from single cell lines containing chromatin of American ginseng were confirmed by the analyses of isozyme, Random amplified polymorphic DNA (RAPD) and genomic in situ hybridization (GISH). High performance liquid chromatography (HPLC) results showed that the ginseng monomer Rb(1) was synthesized in seven of the hybrid calli identified as well as in the parent American ginseng calli but not in the parent carrot calli. Results indicated that hybrid introgression lines could produce ginsenoside Rb(1) and the ginsenoside Rb(1) biosynthesis pathway has been introgressed into carrot cells via somatic hybridization. From the point of biosafety view concerning the consumer acceptance, the potential predominance to produce ginsenosides with somatic hybridization other than with genetic transformation is discussed.

  1. Note: Easy-to-maintain electron cyclotron resonance (ECR) plasma sputtering apparatus featuring hybrid waveguide and coaxial cables for microwave delivery.

    Science.gov (United States)

    Akazawa, Housei

    2016-06-01

    The branched-waveguide electron cyclotron resonance plasma sputtering apparatus places quartz windows for transmitting microwaves into the plasma source not in the line of sight of the target. However, the quartz windows must be replaced after some time of operation. For maintenance, the loop waveguide branching from the T-junction must be dismounted and re-assembled accurately, which is a time-consuming job. We investigated substituting the waveguide branches with two sets of coaxial cables and waveguide/coaxial cable converters to simplify assembly as far as connection and disconnection go. The resulting hybrid system worked well for the purposes of plasma generation and film deposition.

  2. Characterization of Interspecific Hybrids Between Oryza sativa L. and Three Wild Rice Species of China by Genomic In Situ Hybridization

    Institute of Scientific and Technical Information of China (English)

    Guang-Xuan Tan; Zhi-Yong Xiong; Hua-Jun Jin; Gang Li; Li-Li Zhu; Li-Hui Shu; Guang-Cun He

    2006-01-01

    In the genus Oryza, interspecific hybrids are useful bridges for transferring the desired genes from wild species to cultivated rice (Oryza sativa L.). In the present study, hybrids between O. sativa (AA genome)and three Chinese wild rices, namely O. rufipogon (AA genome), O. officinalis (CC genome), and O. meyeriana (GG genome), were produced. Agricultural traits of the F1 hybrids surveyed were intermediate between their parents and appreciably resembled wild rice parents. Except for the O. sativa × O. rufipogon hybrid,the other F1 hybrids were completely sterile. Genomic in situ hybridization (GISH) was used for hybrid verification. Wild rice genomic DNAs were used as probes and cultivated rice DNA was used as a block. With the exception of O. rufipogon chromosomes, this method distinguished the other two wild rice and cultivated rice chromosomes at the stage of mitotic metaphase with different blocking ratios. The results suggest that a more distant phylogenetic relationship exists between O. meyeriana and O. sativa and that O. rufipogon and O. sativa share a high degree of sequence homology. The average mitotic chromosome length of O. officinalis and O. meyeriana was 1.25- and 1.51-fold that of O. sativa, respectively. 4',6'-Diamidino2-phenylindole staining showed that the chromosomes of O. officinalis and O. meyeriana harbored more heterochromatin, suggesting that the C and G genomes were amplified with repetitive sequences compared with the A genome. Although chromocenters formed by chromatln compaction were detected with wild rice-specific signals corresponding to the C and G genomes in discrete domains of the F1 hybrid interphase nuclei, the size and number of O. meyeriana chromocenters were bigger and greater than those of O. officinalis. The present results provide an important understanding of the genomic relationships and a tool for the transfer of useful genes from three native wild rice species in China to cultivars.

  3. Interspecific somatic hybrids Solanum villosum (+) S. tuberosum, resistant to Phytophthora infestans.

    Science.gov (United States)

    Tarwacka, Justyna; Polkowska-Kowalczyk, Lidia; Kolano, Bożena; Śliwka, Jadwiga; Wielgat, Bernard

    2013-11-15

    The interspecific somatic hybrids 4x S. villosum (+) 2x S. tuberosum clone DG 81-68 (VT hybrids) were obtained and characterized molecularly and cytogenetically. The morphology of fusion-derived plants was intermediate in relation to the parental species. The expected ploidy level of the regenerants was 6x for the VT hybrids, but the real ploidy of the hybrids varied, with some of them being euploids, and others - aneuploids. The hybridity of the regenerants was verified by random amplified polymorphic DNA (RAPD) analysis. Despite the variation in ploidy, the RAPD patterns of the hybrids were mostly uniform, suggesting similarity of the genotypes of the VT clones. Genomic in situ hybridization (GISH) analysis discriminated between the chromosomes of both parental genomes in VT somatic hybrids and also confirmed their hybridity. The resistance of VT somatic hybrids to Phytophthora infestans was evaluated and all of the hybrids proved to be highly resistant. In search of the mechanisms involved in resistance of the Solanum species to P. infestans, the biochemical reactions occurring early after elicitor treatment were studied. The production of reactive oxygen species (ROS), as one of the earliest reactions induced by pathogens or their elicitors, was examined in the resistant wild species S. villosum, susceptible S. tuberosum clone DG 81-68 and in the VT hybrid, resistant to P. infestans. After treatment of the leaves with elicitor, the relative increase in ROS production was higher in leaves of the susceptible potato clone than in the resistant plants of S. villosum and the somatic hybrid.

  4. Traffic sounds and cycling safety : the use of electronic devices by cyclists and the quietness of hybrid and electric cars.

    NARCIS (Netherlands)

    Stelling-Konczak, A. Hagenzieker, M.P. & Wee, B. van

    2015-01-01

    The growing popularity of electric devices and the increasing number of hybrid and electric cars have recently raised concerns about the use of auditory signals by vulnerable road users. This paper consolidates current knowledge about the two trends in relation to cycling safety. Both a literature r

  5. Traffic sounds and cycling safety : the use of electronic devices by cyclists and the quietness of hybrid and electric cars.

    NARCIS (Netherlands)

    Stelling-Konczak, A. Hagenzieker, M.P. & Wee, B. van

    2015-01-01

    The growing popularity of electric devices and the increasing number of hybrid and electric cars have recently raised concerns about the use of auditory signals by vulnerable road users. This paper consolidates current knowledge about the two trends in relation to cycling safety. Both a literature

  6. Synthesis of and evidence for electronic communication within heteromultimetallic Tetrakis(NCN-pincer metal) - (Metallo)porphyrin Hybrids

    NARCIS (Netherlands)

    Suijkerbuijk, B.M.J.M.; Tooke, D.M.; Lutz, M.|info:eu-repo/dai/nl/304828971; Spek, A.L.|info:eu-repo/dai/nl/156517566; Jenneskens, L.W.|info:eu-repo/dai/nl/071635246; van Koten, G.|info:eu-repo/dai/nl/073839191; Klein Gebbink, R.J.M.|info:eu-repo/dai/nl/166032646

    2010-01-01

    Several heteromultimetallic pincer-porphyrin hybrids have been prepared in excellent yields by stepwise metalation of a general precursor, [2H(Br(NCN))4], which was designed in such a way so as to guarantee selectivity for either the porphyrin or pincer sites during themetalation steps. First, ameta

  7. The Digital electronic Guideline Library (DeGeL): a hybrid framework for representation and use of clinical guidelines.

    Science.gov (United States)

    Shahar, Yuval; Young, Ohad; Shalom, Erez; Mayaffit, Alon; Moskovitch, Robert; Hessing, Alon; Galperin, Maya

    2004-01-01

    We propose to present a poster (and potentially also a demonstration of the implemented system) summarizing the current state of our work on a hybrid, multiple-format representation of clinical guidelines that facilitates conversion of guidelines from free text to a formal representation. We describe a distributed Web-based architecture (DeGeL) and a set of tools using the hybrid representation. The tools enable performing tasks such as guideline specification, semantic markup, search, retrieval, visualization, eligibility determination, runtime application and retrospective quality assessment. The representation includes four parallel formats: Free text (one or more original sources); semistructured text (labeled by the target guideline-ontology semantic labels); semiformal text (which includes some control specification); and a formal, machine-executable representation. The specification, indexing, search, retrieval, and browsing tools are essentially independent of the ontology chosen for guideline representation, but editing the semi-formal and formal formats requires ontology-specific tools, which we have developed in the case of the Asbru guideline-specification language. The four formats support increasingly sophisticated computational tasks. The hybrid guidelines are stored in a Web-based library. All tools, such as for runtime guideline application or retrospective quality assessment, are designed to operate on all representations. We demonstrate the hybrid framework by providing examples from the semantic markup and search tools.

  8. Improved photochromic properties on viologen-based inorganic-organic hybrids by using π-conjugated substituents as electron donors and stabilizers.

    Science.gov (United States)

    Lin, Rong-Guang; Xu, Gang; Wang, Ming-Sheng; Lu, Gang; Li, Pei-Xin; Guo, Guo-Cong

    2013-02-04

    A series of inorganic-organic hybrid compounds L(2)(Bi(2)Cl(10)) (L = HMV(2+) = N-proton-N'-methyl-4,4'-bipyridinium for 1, L = HBzV(2+) = N-proton-N'-benzyl-4,4'-bipyridinium for 2, and L = HPeV(2+) = N-proton-N'-phenethyl-4,4'-bipyridinium for 3) have been successfully synthesized by an in situ solvothermal reaction. Compounds 1-3, with the same metal halide as anions but different asymmetric viologen molecules as cations, are ideal model compounds for investigating the detailed effect of different photochromically active molecules on the photochromic properties of the hybrids. Compound 1 shows no photochromic behavior, but compounds 2 and 3 possess photochromism and show a faster photoresponse rate than other reported viologen metal halide hybrids. Studies on the relationship between the structure and photochromic behavior clearly reveal that π-conjugated substituents could be used to improve the photoresponsibility and enrich the developed color efficiently and that the π···π interaction among organic components may not only be a powerful factor to stabilize the viologen monocation radical but also act as the second path of electron transfer from the π-conjugated substituent to the viologen cation for the photochromic process, which significantly influences the photochromic properties.

  9. First-principles hybrid functional study of the electronic structure and charge carrier mobility in perovskite CH3NH3SnI3

    Science.gov (United States)

    Wu, Li-Juan; Zhao, Yu-Qing; Chen, Chang-Wen; Wang, Lin-Zhi; Liu, Biao; Cai, Meng-Qiu

    2016-10-01

    We calculate the electronic properties and carrier mobility of perovskite CH3NH3SnI3 as a solar cell absorber by using the hybrid functional method. The calculated result shows that the electron and hole mobilities have anisotropies with a large magnitude of 1.4 × 104 cm2·V-1·s-1 along the y direction. In view of the huge difference between hole and electron mobilities, the perovskite CH3NH3SnI3 can be considered as a p-type semiconductor. We also discover a relationship between the effective mass anisotropy and electronic occupation anisotropy. The above results can provide reliable guidance for its experimental applications in electronics and optoelectronics. Project supported by the National Natural Science Foundation of China (Grant No. 51172067), the Hunan Provincial Natural Science Fund for Distinguished Young Scholars, China (Grant No. 13JJ1013), the Specialized Research Fund for the Doctoral Program of Higher Education, China (Grant No. 20130161110036), and the New Century Excellent Talents in University, China (Grant No. NCET-12-0171.D).

  10. Nonlinear electronic excitations in crystalline solids using meta-generalized gradient approximation and hybrid functional in time-dependent density functional theory

    Science.gov (United States)

    Sato, Shunsuke A.; Taniguchi, Yasutaka; Shinohara, Yasushi; Yabana, Kazuhiro

    2015-12-01

    We develop methods to calculate electron dynamics in crystalline solids in real-time time-dependent density functional theory employing exchange-correlation potentials which reproduce band gap energies of dielectrics; a meta-generalized gradient approximation was proposed by Tran and Blaha [Phys. Rev. Lett. 102, 226401 (2009)] (TBm-BJ) and a hybrid functional was proposed by Heyd, Scuseria, and Ernzerhof [J. Chem. Phys. 118, 8207 (2003)] (HSE). In time evolution calculations employing the TB-mBJ potential, we have found it necessary to adopt the predictor-corrector step for a stable time evolution. We have developed a method to evaluate electronic excitation energy without referring to the energy functional which is unknown for the TB-mBJ potential. For the HSE functional, we have developed a method for the operation of the Fock-like term in Fourier space to facilitate efficient use of massive parallel computers equipped with graphic processing units. We compare electronic excitations in silicon and germanium induced by femtosecond laser pulses using the TB-mBJ, HSE, and a simple local density approximation (LDA). At low laser intensities, electronic excitations are found to be sensitive to the band gap energy: they are close to each other using TB-mBJ and HSE and are much smaller in LDA. At high laser intensities close to the damage threshold, electronic excitation energies do not differ much among the three cases.

  11. Nonlinear electronic excitations in crystalline solids using meta-generalized gradient approximation and hybrid functional in time-dependent density functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Shunsuke A. [Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Taniguchi, Yasutaka [Center for Computational Science, University of Tsukuba, Tsukuba 305-8571 (Japan); Department of Medical and General Sciences, Nihon Institute of Medical Science, 1276 Shimogawara, Moroyama-Machi, Iruma-Gun, Saitama 350-0435 (Japan); Shinohara, Yasushi [Max Planck Institute of Microstructure Physics, 06120 Halle (Germany); Yabana, Kazuhiro [Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Center for Computational Science, University of Tsukuba, Tsukuba 305-8571 (Japan)

    2015-12-14

    We develop methods to calculate electron dynamics in crystalline solids in real-time time-dependent density functional theory employing exchange-correlation potentials which reproduce band gap energies of dielectrics; a meta-generalized gradient approximation was proposed by Tran and Blaha [Phys. Rev. Lett. 102, 226401 (2009)] (TBm-BJ) and a hybrid functional was proposed by Heyd, Scuseria, and Ernzerhof [J. Chem. Phys. 118, 8207 (2003)] (HSE). In time evolution calculations employing the TB-mBJ potential, we have found it necessary to adopt the predictor-corrector step for a stable time evolution. We have developed a method to evaluate electronic excitation energy without referring to the energy functional which is unknown for the TB-mBJ potential. For the HSE functional, we have developed a method for the operation of the Fock-like term in Fourier space to facilitate efficient use of massive parallel computers equipped with graphic processing units. We compare electronic excitations in silicon and germanium induced by femtosecond laser pulses using the TB-mBJ, HSE, and a simple local density approximation (LDA). At low laser intensities, electronic excitations are found to be sensitive to the band gap energy: they are close to each other using TB-mBJ and HSE and are much smaller in LDA. At high laser intensities close to the damage threshold, electronic excitation energies do not differ much among the three cases.

  12. 3D-hybrid material design with electron/lithium-ion dual-conductivity for high-performance Li-sulfur batteries

    Science.gov (United States)

    Zhao, Yan; Tan, Rui; Yang, Jie; Wang, Kai; Gao, Rongtan; Liu, Dong; Liu, Yidong; Yang, Jinlong; Pan, Feng

    2017-02-01

    We report a novel 3D-hybrid cathode material with three-dimensional (3D) N-GO/CNT framework to load sulfur (77.6 wt %), and sulfonated polyaniline (SPANI) of coating layer. Used as a cathode material, it possesses a high capacity (1196 mAh g-1@0.3 A g-1@1.6 mg cm-2), excellent charging-discharging rate (680 mAh g-1@7.5 A g-1) and long-life performance (maintaining 71.1% capacity over 450 cycles), which is mainly attributed to the benefits of excellent electronic/Li-ionic dual-conductivity and confinement effect of the 3D-hybrid N-GO/CNT framework coated by self-doping conducting polymer SPANI. Thus, a 3D sulfur cathode modified with electronic/Li-ionic dual-conduction network can significantly enhance the electrochemical performance and stability, and this novel type of material is very promising for commercial applications that require high energy and power density, long life, and excellent abuse tolerance.

  13. Comparative study of symmetric and asymmetric somatic hybridization between common wheat and Haynaldia villosa

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Symmetric and asymmetric protoplast fusion between long term cell suspension-derived protoplasts of Triticum aestivum (cv. Jinan 177) and protoplasts of Haynaldia villosa prepared from one-year-old embryogeneric calli was performed by PEG method. In asymmetric fusion, donor calli were treated with gamma ray at a dose of 40, 60, 80 Gy (1.3 Gy/min) respectively and then used to isolate protoplasts. Results of morphological, cytological, biochemical (isozyme) and 5S rDNA spacer sequence analysis revealed that we obtained somatic hybrid lines at high frequency from both symmetric and asymmetric fusion. Hybrid plants were recovered from symmetric and low dose g-fusion combinations. GISH (genomic in situ hybridization) analysis proved exactly the existence of both parental chromosomes and the common occurrence of several kinds of translocation between them in the hybrid clones regenerated from symmetric and asymmetric fusion. And the elimination of donor DNA in hybrid clones regenerated from asymmetric fusion combinations was found to increase with the increasing gamma doses. It is concluded that transference and recombination of nuclear DNA can be achieved effectively by symmetric and asymmetric fusion, hybrids with small fragment translocation which are valuable in plant breeding can be obtained directly by asymmetric fusion.

  14. Effect of the electric field pattern on the generation of fast electrons in front of lower hybrid launchers

    Energy Technology Data Exchange (ETDEWEB)

    Valade, Laurent, E-mail: laurent.valade@cea.fr; Ekedahl, Annika; Colas, Laurent; Goniche, Marc; Hillairet, Julien [CEA, IRFM, F-13108 Saint Paul-lez-Durance (France); Fuchs, Vladimir; Petrzilka, Vaclav [Institute of Plasma Physics, AS CR, Prague (Czech Republic); Li, Miaohui; Zhang, Bin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

    2015-12-10

    The effect of the detailed waveguide spectrum on the electron acceleration has been studied for the 3.7 GHz LHCD launchers in Tore Supra, i.e. the ITER-like passive-active multijunction (PAM) launcher and the fully-active-multijunction (FAM) launcher, using test electron modelling technique. The detailed launched antenna wave spectrum is used as input to the code that computes the dynamics of the electrons in the electric field. Comparison with the LHCD launchers in EAST, operating at 2.45 GHz and 4.6 GHz, has also been made. The simulations show that the PAM-design generates lower flux of fast electrons than FAM-launchers, this could be the consequence of the wider waveguide of PAM-launcher (14.65 mm for Tore-Supra) than FAM-launcher (8 mm for Tore-Supra)

  15. High current density and longtime stable field electron transfer from large-area densely arrayed graphene nanosheet-carbon nanotube hybrids.

    Science.gov (United States)

    Deng, Jian-Hua; Cheng, Lin; Wang, Fan-Jie; Li, Guo-Zheng; Li, De-Jun; Cheng, Guo-An

    2014-12-10

    Achieving high current and longtime stable field emission from large area (larger than 1 mm(2)), densely arrayed emitters is of great importance in applications for vacuum electron sources. We report here the preparation of graphene nanosheet-carbon nanotube (GNS-CNT) hybrids by following a process of iron ion prebombardment on Si wafers, catalyst-free growth of GNSs on CNTs, and high-temperature annealing. Structural observations indicate that the iron ion prebombardment influences the growth of CNTs quite limitedly, and the self-assembled GNSs sparsely distributed on the tips of CNTs with their sharp edges unfolded outside. The field emission study indicates that the maximum emission current density (Jmax) is gradually promoted after these treatments, and the composition with GNSs is helpful for decreasing the operation fields of CNTs. An optimal Jmax up to 85.10 mA/cm(2) is achieved from a 4.65 mm(2) GNS-CNT sample, far larger than 7.41 mA/cm(2) for the as-grown CNTs. This great increase of Jmax is ascribed to the reinforced adhesion of GNS-CNT hybrids to substrates. We propose a rough calculation and find that this adhesion is promoted by 7.37 times after the three-step processing. We consider that both the ion prebombardment produced rough surface and the wrapping of CNT foot by catalyst residuals during thermal processing are responsible for this enhanced adhesion. Furthermore, the three-step prepared GNS-CNT hybrids present excellent field emission stability at high emission current densities (larger than 20 mA/cm(2)) after being perfectly aged.

  16. A hybrid electron and photon IMRT planning technique that lowers normal tissue integral patient dose using standard hardware.

    Science.gov (United States)

    Rosca, Florin

    2012-06-01

    To present a mixed electron and photon IMRT planning technique using electron beams with an energy range of 6-22 MeV and standard hardware that minimizes integral dose to patients for targets as deep as 7.5 cm. Ten brain cases, two lung, a thyroid, an abdominal, and a parotid case were planned using two planning techniques: a photon-only IMRT (IMRT) versus a mixed modality treatment (E+IMRT) that includes an enface electron beam and a photon IMRT portion that ensures a uniform target coverage. The electron beam is delivered using a regular cutout placed in an electron cone. The electron energy was chosen to provide a good trade-off between minimizing integral dose and generating a uniform, deliverable plan. The authors choose electron energies that cover the deepest part of PTV with the 65%-70% isodose line. The normal tissue integral dose, the dose for ring structures around the PTV, and the volumes of the 75%, 50%, and 25% isosurfaces were used to compare the dose distributions generated by the two planning techniques. The normal tissue integral dose was lowered by about 20% by the E+IMRT plans compared to the photon-only IMRT ones for most studied cases. With the exception of lungs, the dose reduction associated to the E+IMRT plans was more pronounced further away from the target. The average dose ratio delivered to the 0-2 cm and the 2-4 cm ring structures for brain patients for the two planning techniques were 89.6% and 70.8%, respectively. The enhanced dose sparing away from the target for the brain patients can also be observed in the ratio of the 75%, 50%, and 25% isodose line volumes for the two techniques, which decreases from 85.5% to 72.6% and further to 65.1%, respectively. For lungs, the lateral electron beams used in the E+IMRT plans were perpendicular to the mostly anterior/posterior photon beams, generating much more conformal plans. The authors proved that even using the existing electron delivery hardware, a mixed electron/photon planning

  17. Functional separation of oxidation–reduction reactions and electron transport in PtRu/ND and conductive additive hybrid electrocatalysts during methanol oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yan; Wang, Yanhui [State Key Laboratory of Metastable Materials Science and Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004 (China); Bian, Linyan [College of Physics and Chemistry, Henan Polytechnic University, Jiaozuo, Henan 454000 (China); Lu, Rui [State Key Laboratory of Metastable Materials Science and Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004 (China); Zang, Jianbing, E-mail: jbzang@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004 (China)

    2016-02-28

    Graphical abstract: - Highlights: • Functional separation of reactions and electron transport in PtRu/ND + AB (or CNT). • A conductive network was formed after the addition of AB or CNT. • PtRu/ND + AB (or CNT) exhibited enhanced activity and stability than PtRu/ND. - Abstract: Undoped nanodiamond (ND) supported PtRu (PtRu/ND) electrocatalyst for methanol oxidation reactions (MOR) in direct methanol fuel cells was prepared by a microwave-assisted polyol reduction method. Sp{sup 3}-bonded ND possesses high electrochemical stability but low conductivity, while sp{sup 2}-bonded carbon nanomaterials with high conductivity are prone to oxidation. Therefore, the functions of the supporting material were separated in this study. ND (sp{sup 3}), as a support, and AB or CNTs (sp{sup 2}), as a conductive additive, were combined to form the hybrid electrocatalysts PtRu/ND + AB and PtRu/ND + CNT for MOR. The morphology of the electrocatalysts was characterized by scanning electron microscopy and electrochemical measurements were performed using an electrochemical workstation. The results indicated that the electrocatalytic activity of PtRu/ND for MOR was improved with the addition of AB or CNTs as a conductive additive. Moreover, adding CNTs to PtRu/ND as a conductive additive showed better electrocatalytic activities than adding AB, which can be ascribed to the better electron-transfer ability of CNTs.

  18. Interfacial electronic structure and charge transfer of hybrid graphene quantum dot and graphitic carbon nitride nanocomposites: insights into high efficiency for photocatalytic solar water splitting.

    Science.gov (United States)

    Ma, Zuju; Sa, Rongjian; Li, Qiaohong; Wu, Kechen

    2016-01-14

    New metal-free carbon nanodot/carbon nitride (C3N4) nanocomposites have shown to exhibit high efficiency for photocatalytic solar water splitting. (J. Liu, et al., Science, 2015, 347, 970) However, the mechanism underlying the ultrahigh performance of these nanocomposites and consequently the possibilities for further improvements are not at present clear. In this work, we performed hybrid functional calculations and included long-range dispersion corrections to accurately characterize the interfacial electron coupling of the graphene quantum dot-graphitic carbon nitride composites (Gdot/g-C3N4). The results revealed that the band gap of Gdot/g-C3N4 could be engineered by changing the lateral size of Gdots. In particular, the C24H12/g-C3N4 composites present an ideal band gap of 1.92 eV to harvest a large part of solar light. More interestingly, a type-II heterojunction is formed at the interface of the Gdot/g-C3N4 composites, a desirable feature for enhanced photocatalytic activity. The charge redistribution at the interface leads to strong electron depletion above the Gdot sheet and electron accumulation below the g-C3N4 monolayer, potentially facilitating the separation of H2O oxidation and reduction reactions. Furthermore, we suggested that the photocatalytic performance of the Gdot/g-C3N4 nanocomposites can be further improved by decreasing the thickness of Gdots and tuning the size of Gdots.

  19. Hybrid functional study of structural, electronic and magnetic properties of S-doped ZnO with and without neutral vacancy

    Energy Technology Data Exchange (ETDEWEB)

    Debbichi, M., E-mail: mourad_fsm@yahoo.fr [Laboratoire de la matière condensée et nanosciences, Département de Physique, Faculté des Sciences de Monastir, 5019 Monastir (Tunisia); Sakhraoui, T. [Laboratoire de la matière condensée et nanosciences, Département de Physique, Faculté des Sciences de Monastir, 5019 Monastir (Tunisia); Debbichi, L. [Institut Carnot de Bourgogne, UMR 6303, Université de Bourgogne-CNRS, 21078 Dijon (France); Said, M. [Laboratoire de la matière condensée et nanosciences, Département de Physique, Faculté des Sciences de Monastir, 5019 Monastir (Tunisia)

    2013-11-25

    Highlights: •S-doped ZnO have been investigated by DFT and EPM. •Good agreement with the experimental data is obtained by HSE (α = 0.28) functional on lattice parameters and band gap energy. •Zn vacancy introduced in S doped ZnO is studied by HSE to determine its electronic and magnetic properties. -- Abstract: The structural and electronic properties of S-doped ZnO are investigated by density functional theory (DFT) and empirical pseudopotential method (EPM). Using the Heyd–Scuseria–Ernzerhof (HSE) hybrid functional with an adjusted mixing coefficient α, we obtain a good agreement on lattice parameters and band gap energy with the available experimental data. We have also investigate the Zn-vacancy effects on the electronic and magnetic properties of S-doped ZnO. Our calculations demonstrate that S impurity prefers to be close to the cation vacancy in the apical position. The magnetic analysis with the HSE functional shows a triplet state character with a total magnetic moment of 1.81 μ{sub B}, which is mainly arises from the p-orbitals of the atoms around the Zn-vacancy (15% from S, 12% from Zn and 73% from O-atoms). The substitution of S by an isovalent atom decreases the total magnetic moments of the system and weakens the local triplet state without destroying it.

  20. Structural, electronic and energetic properties of giant icosahedral fullerenes up to C6000: insights from an ab initio hybrid DFT study.

    Science.gov (United States)

    Noël, Yves; De La Pierre, Marco; Zicovich-Wilson, Claudio M; Orlando, Roberto; Dovesi, Roberto

    2014-07-14

    The properties of the (n,n) icosahedral family of carbon fullerenes up to n = 10 (6000 atoms) have been investigated through ab initio quantum-mechanical simulation by using a Gaussian type basis set of double zeta quality with polarization functions (84,000 atomic orbitals for the largest case), the hybrid B3LYP functional and the CRYSTAL14 code featuring generalization of symmetry treatment. The geometry of giant fullerenes shows hybrid features, between a polyhedron and a sphere; as n increases, it approaches the former. Hexagon rings at face centres take a planar, graphene-like configuration; the 12 pentagon rings at vertices impose, however, a severe structural constraint to which hexagon rings at the edges must adapt smoothly, adopting a bent (rather than sharp) transversal profile and an inward longitudinal curvature. The HOMO and LUMO electronic levels, as well as the band gap, are well described using power laws. The gap is predicted to become zero for n ≥ 34 (69,360 atoms). The atomic excess energy with respect to the ideal graphene sheet goes to zero following the log(Nat)/Nat law, which is well described through the continuum elastic theory applied to graphene; the limits for the adopted model are briefly outlined. Compared to larger fullerenes of the series, C60 shows unique features with respect to all the considered properties; C240 presents minor structural and energetic peculiarities, too.

  1. The electronic structure of organic-inorganic hybrid compounds: (NH₄)₂CuCl₄, (CH₃NH₃)₂CuCl₄ and (C₂H₅NH₃)₂CuCl₄.

    Science.gov (United States)

    Zolfaghari, P; de Wijs, G A; de Groot, R A

    2013-07-24

    Hybrid organic-inorganic compounds are an intriguing class of materials that have been experimentally studied over the past few years because of a potential broad range of applications. The electronic and magnetic properties of three organic-inorganic hybrid compounds with compositions (NH4)2CuCl4, (CH3NH3)2CuCl4 and (C2H5NH3)2CuCl4 are investigated for the first time with density functional theory plus on-site Coulomb interaction. A strong Coulomb interaction on the copper causes a relatively weak exchange coupling within the layers of the octahedral network, in good agreement with experiment. The character of the exchange interaction (responsible for magnetic behavior) is analyzed. The calculations reveal that (C2H5NH3)2CuCl4 has the strongest Jahn-Teller (JT) distortion in comparison with the two other compounds. The easy axis of magnetization is investigated, showing a weak anisotropic interaction between inter-layer Cu(2+) ions in the (C2H5NH3)2CuCl4 structure. Orbital ordering is concluded from our partial density of states calculations: a cooperation of the JT distortion with an antiferro-distortive pattern.

  2. First principle study of electronic and optical properties of molecular ion (BF4- ) substituted hybrid perovskite (CH3NH3PbI3)

    Science.gov (United States)

    Rani, Shalu; Singh, Poorva

    2017-05-01

    Hybrid organic/inorganic perovskites have garnered significant research interest due to the extraordinary increase in energy conversion efficiency as witnessed in photovoltaic devices based on CH3NH3PbI3. An experimental report has shown that the substitution of BF4- in the perovskite CH3NH3PbI3 can lead to the high efficiency for solar cell. Employing first-principles calculations based on density functional theory, we have studied several different perovskites CH3NH3PbI3 , CH3NH3PbI2BF4, CH3NH3PbI(BF4)2, CH3NH3Pb(BF4)3 and examined their electronic structure and optical properties.

  3. ZnO Nanorods on a LaAlO 3 -SrTiO 3 Interface: Hybrid 1D-2D Diodes with Engineered Electronic Properties

    KAUST Repository

    Bera, Ashok

    2015-12-28

    Integrating nanomaterials with different dimensionalities and properties is a versatile approach toward realizing new functionalities in advanced devices. Here, a novel diode-type heterostructure is reported consisting of 1D semiconducting ZnO nanorods and 2D metallic LaAlO3-SrTiO3 interface. Tunable insulator-to-metal transitions, absent in the individual components, are observed as a result of the competing temperature-dependent conduction mechanisms. Detailed transport analysis reveals direct tunneling at low bias, Fowler-Nordheim tunneling at high forward bias, and Zener breakdown at high reverse bias. Our results highlight the rich electronic properties of such artificial diodes with hybrid dimensionalities, and the design principle may be generalized to other nanomaterials. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. ZnO Nanorods on a LaAlO3 -SrTiO3 Interface: Hybrid 1D-2D Diodes with Engineered Electronic Properties.

    Science.gov (United States)

    Bera, Ashok; Lin, Weinan; Yao, Yingbang; Ding, Junfeng; Lourembam, James; Wu, Tom

    2016-02-10

    Integrating nanomaterials with different dimensionalities and properties is a versatile approach toward realizing new functionalities in advanced devices. Here, a novel diode-type heterostructure is reported consisting of 1D semiconducting ZnO nanorods and 2D metallic LaAlO3-SrTiO3 interface. Tunable insulator-to-metal transitions, absent in the individual components, are observed as a result of the competing temperature-dependent conduction mechanisms. Detailed transport analysis reveals direct tunneling at low bias, Fowler-Nordheim tunneling at high forward bias, and Zener breakdown at high reverse bias. Our results highlight the rich electronic properties of such artificial diodes with hybrid dimensionalities, and the design principle may be generalized to other nanomaterials.

  5. Application of P-wave Hybrid Theory to the Scattering of Electrons from He+ and Resonances in He and H ion

    Science.gov (United States)

    Bhatia, A. K.

    2012-01-01

    The P-wave hybrid theory of electron-hydrogen elastic scattering [Phys. Rev. A 85, 052708 (2012)] is applied to the P-wave scattering from He ion. In this method, both short-range and long-range correlations are included in the Schroedinger equation at the same time, by using a combination of a modified method of polarized orbitals and the optical potential formalism. The short-correlation functions are of Hylleraas type. It is found that the phase shifts are not significantly affected by the modification of the target function by a method similar to the method of polarized orbitals and they are close to the phase shifts calculated earlier by Bhatia [Phys. Rev. A 69, 032714 (2004)]. This indicates that the correlation function is general enough to include the target distortion (polarization) in the presence of the incident electron. The important fact is that in the present calculation, to obtain similar results only a 20-term correlation function is needed in the wave function compared to the 220- term wave function required in the above-mentioned calculation. Results for the phase shifts, obtained in the present hybrid formalism, are rigorous lower bounds to the exact phase shifts. The lowest P-wave resonances in He atom and hydrogen ion have been calculated and compared with the results obtained using the Feshbach projection operator formalism [Phys. Rev. A, 11, 2018 (1975)]. It is concluded that accurate resonance parameters can be obtained by the present method, which has the advantage of including corrections due to neighboring resonances, bound states and the continuum in which these resonance are embedded.

  6. Structural and electronic properties of hybrid perovskites for high-efficiency thin-film photovoltaics from first-principles

    Directory of Open Access Journals (Sweden)

    Federico Brivio

    2013-10-01

    Full Text Available The performance of perovskite solar cells recently exceeded 15% solar-to-electricity conversion efficiency for small-area devices. The fundamental properties of the active absorber layers, hybrid organic-inorganic perovskites formed from mixing metal and organic halides [e.g., (NH4PbI3 and (CH3NH3PbI3], are largely unknown. The materials are semiconductors with direct band gaps at the boundary of the first Brillouin zone. The calculated dielectric constants and band gaps show an orientation dependence, with a low barrier for rotation of the organic cations. Due to the electric dipole of the methylammonium cation, a photoferroic effect may be accessible, which could enhance carrier collection.

  7. Multifunctional Inverse Opal-Like TiO2 Electron Transport Layer for Efficient Hybrid Perovskite Solar Cells.

    Science.gov (United States)

    Chen, Xiao; Yang, Shuang; Zheng, Yi Chu; Chen, Ying; Hou, Yu; Yang, Xiao Hua; Yang, Hua Gui

    2015-09-01

    A novel multifunctional inverse opal-like TiO2 electron transport layer (IOT-ETL) is designed to replace the traditional compact layer and mesoporous scaffold layer in perovskite solar cells (PSCs). Improved light harvesting efficiency and charge transporting performance in IOT-ETL based PSCs yield high power conversion efficiency of 13.11%.

  8. Multicentre clinical trials' data management: a hybrid solution to exploit the strengths of electronic data capture and electronic health records systems.

    Science.gov (United States)

    Fraccaro, Paolo; Dentone, Chiara; Fenoglio, Daniela; Giacomini, Mauro

    2013-12-01

    Clinical Trials (CTs) are indispensable instruments for evidence-based medicine and frequently necessitate the management, sharing and analysis of large amounts of data amongst partners in different locations. To effectively satisfy these requirements, the proposed solution combines a web platform and a Clinical Data Management System (CDMS) to exploit the strengths of Electronic Health Records (EHR) and Electronic Data Capture (EDC) systems. The core of the proposal is a relational database which has high data structuring characteristics and utilises biomedical controlled vocabularies (e.g. LOINC and ICD). In addition, units and normality ranges were collected for data comparison through the application of the Z-score transformation. The obtained CDMS preserves the EDC's flexibility and user autonomy and permits the creation of patient cohorts, as in the EHR. Accordingly, clinical information, after the initial recording, is available for different simultaneous multicentre CTs. Furthermore, interface runtime controls guarantee high data quality during data entering processes. Currently, the proposed system has been developed in the HIV and eye diseases fields in Italy. The proposed solution is flexible and suitable to perform multicentre research within a varying range of medical domains. In the future, the automatic importation of information from hospitals has been planned through an HL7 standard interface which would improve both data quantity and quality.

  9. ZrO2/TiO2 Electron Collection Layer for Efficient Meso-Superstructured Hybrid Perovskite Solar Cells.

    Science.gov (United States)

    Mejía Escobar, Mario Alejandro; Pathak, Sandeep; Liu, Jiewei; Snaith, Henry J; Jaramillo, Franklin

    2017-01-25

    Since the first reports of efficient organic-inorganic perovskite solar cells in 2012, an explosion of research activity has emerged around the world, which has led to a rise in the power conversion efficiencies (PCEs) to over 20%. Despite the impressive efficiency, a key area of the device which remains suboptimal is the electron extraction layer and its interface with the photoactive perovskite. Here, we implement an electron collection "bilayer" composed of a thin layer of zirconia coated with titania, sitting upon the transparent conductive oxide fluorine-doped tin oxide (FTO). With this double collection layer we have reached up to 17.9% power conversion efficiency, delivering a stabilized power output (SPO) of 17.0%, measured under simulated AM 1.5 sunlight of 100 mW cm(-2) irradiance. Finally, we propose a mechanism of the charge transfer processes within the fabricated architectures in order to explain the obtained performance of the devices.

  10. Theoretical and experimental investigations of optical, structural and electronic properties of the lower-dimensional hybrid [NH3-(CH2)10-NH3]ZnCl4

    Science.gov (United States)

    El Mrabet, R.; Kassou, S.; Tahiri, O.; Belaaraj, A.; Guionneau, P.

    2016-10-01

    In the current study, a combination between theoretical and experimental studies has been made for the hybrid perovskite [NH3-(CH2)10-NH3]ZnCl4. The density functional theory (DFT) was performed to investigate structural and electronic properties of the tilted compound. A local approximation (LDA) and semi-local approach (GGA) were employed. The results are obtained using, respectively, the local exchange correlation functional of Perdew-Wang 92 (PW92) and semi local functional of Perdew-Burke-Ernzerhof (PBE). The optimized cell parameters are in good agreement with the experimental results. Electronic properties have been studied through the calculation of band structures and density of state (DOS), while structural properties are investigated by geometry optimization of the cell. Fritz-Haber-Institute (FHI) pseudopotentials were employed to perform all calculations. The optical diffuse reflectance spectra was mesured and applied to deduce the refractive index ( n), the extinction coefficient ( k), the absorption coefficient (α), the real and imaginary dielectric permittivity parts (ɛr,ɛi)) and the optical band gap energy Eg. The optical band gap energy value shows good consistent with that obtained from DFT calculations and reveals the insulating behavior of the material.

  11. A hybrid functional study of the electronic and optical properties of tetragonal PbO-type phase of ZnO under pressure

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qingbo [State Key Laboratory of Material Processing and Die and Mould Technology and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei (China); School of Mathematics and Physics, China University of Geosciences (Wuhan), Wuhan 430074, Hubei (China); Wen, Yanwei [State Key Laboratory of Material Processing and Die and Mould Technology and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei (China); Chen, Rong, E-mail: rongchen@mail.hust.edu.cn [State Key Laboratory of Digital Manufacturing Equipment and Technology and School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei (China); Shan, Bin, E-mail: bshan@mail.hust.edu.cn [State Key Laboratory of Material Processing and Die and Mould Technology and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei (China); Department of Materials Science and Engineering, The University of Texas at Dallas, Richardson, TX 75080 (United States)

    2014-02-15

    Highlights: • HSE was used to study the electronic and optical properties of new B10 ZnO phase. • Band gap is ranging from 6.08 to 7.06 eV under high pressure from 236 to 316 GPa. • The optical constants undergo a blue shift with the increasing pressure. -- Abstract: To extend our knowledge on the tetragonal PbO-type (B10) phase of ZnO under high pressure, we used the hybrid functional theory to calculate its electronic and optical properties. Our calculations indicate that the B10 phase is a transparent insulator and has an indirect band gap ranging from 6.08 to 7.06 eV with pressure increasing from 236 to 316 GPa. The B10 phase under 236 GPa has excellent dielectric properties except metallic behaviors at around 25 and 37 eV photon excitation. We found a blue shift in optical properties of the B10 phase with the increase of pressure.

  12. Ground-state phase diagram, fermionic entanglement and kinetically-induced frustration in a hybrid ladder with localized spins and mobile electrons

    Science.gov (United States)

    Carvalho, R. C. P.; Pereira, M. S. S.; de Oliveira, I. N.; Strečka, J.; Lyra, M. L.

    2017-09-01

    We introduce an exactly solvable hybrid spin-ladder model containing localized nodal Ising spins and interstitial mobile electrons, which are allowed to perform a quantum-mechanical hopping between the ladder’s legs. The quantum-mechanical hopping process induces an antiferromagnetic coupling between the ladder’s legs that competes with a direct exchange coupling of the nodal spins. The model is exactly mapped onto the Ising spin ladder with temperature-dependent two- and four-spin interactions, which is subsequently solved using the transfer-matrix technique. We report the ground-state phase diagram and compute the fermionic concurrence to characterize the quantum entanglement between the pair of interstitial mobile electrons. We further provide a detailed analysis of the local spin ordering including the pair and four-spin correlation functions around an elementary plaquette, as well as, the local ordering diagrams. It is shown that a complex sequence of distinct local orderings and frustrated correlations takes place when the model parameters drive the investigated system close to a zero-temperature triple coexistence point.

  13. A hybrid digital-signature and zero-watermarking approach for authentication and protection of sensitive electronic documents.

    Science.gov (United States)

    Tayan, Omar; Kabir, Muhammad N; Alginahi, Yasser M

    2014-01-01

    This paper addresses the problems and threats associated with verification of integrity, proof of authenticity, tamper detection, and copyright protection for digital-text content. Such issues were largely addressed in the literature for images, audio, and video, with only a few papers addressing the challenge of sensitive plain-text media under known constraints. Specifically, with text as the predominant online communication medium, it becomes crucial that techniques are deployed to protect such information. A number of digital-signature, hashing, and watermarking schemes have been proposed that essentially bind source data or embed invisible data in a cover media to achieve its goal. While many such complex schemes with resource redundancies are sufficient in offline and less-sensitive texts, this paper proposes a hybrid approach based on zero-watermarking and digital-signature-like manipulations for sensitive text documents in order to achieve content originality and integrity verification without physically modifying the cover text in anyway. The proposed algorithm was implemented and shown to be robust against undetected content modifications and is capable of confirming proof of originality whilst detecting and locating deliberate/nondeliberate tampering. Additionally, enhancements in resource utilisation and reduced redundancies were achieved in comparison to traditional encryption-based approaches. Finally, analysis and remarks are made about the current state of the art, and future research issues are discussed under the given constraints.

  14. A Hybrid Digital-Signature and Zero-Watermarking Approach for Authentication and Protection of Sensitive Electronic Documents

    Directory of Open Access Journals (Sweden)

    Omar Tayan

    2014-01-01

    Full Text Available This paper addresses the problems and threats associated with verification of integrity, proof of authenticity, tamper detection, and copyright protection for digital-text content. Such issues were largely addressed in the literature for images, audio, and video, with only a few papers addressing the challenge of sensitive plain-text media under known constraints. Specifically, with text as the predominant online communication medium, it becomes crucial that techniques are deployed to protect such information. A number of digital-signature, hashing, and watermarking schemes have been proposed that essentially bind source data or embed invisible data in a cover media to achieve its goal. While many such complex schemes with resource redundancies are sufficient in offline and less-sensitive texts, this paper proposes a hybrid approach based on zero-watermarking and digital-signature-like manipulations for sensitive text documents in order to achieve content originality and integrity verification without physically modifying the cover text in anyway. The proposed algorithm was implemented and shown to be robust against undetected content modifications and is capable of confirming proof of originality whilst detecting and locating deliberate/nondeliberate tampering. Additionally, enhancements in resource utilisation and reduced redundancies were achieved in comparison to traditional encryption-based approaches. Finally, analysis and remarks are made about the current state of the art, and future research issues are discussed under the given constraints.

  15. A hybrid method for protection against threats to a network infrastructure for an electronic warfare management system

    Science.gov (United States)

    Byłak, Michał; RóŻański, Grzegorz

    2017-04-01

    The article presents the concept of ensuring the security of network information infrastructure for the management of Electronic Warfare (EW) systems. The concept takes into account the reactive and proactive tools against threats. An overview of the methods used to support the safety of IT networks and information sources about threats is presented. Integration of mechanisms that allow for effective intrusion detection and rapid response to threats in a network has been proposed. The architecture of the research environment is also presented.

  16. OPTESIM, a versatile toolbox for numerical simulation of electron spin echo envelope modulation (ESEEM) that features hybrid optimization and statistical assessment of parameters.

    Science.gov (United States)

    Sun, Li; Hernandez-Guzman, Jessica; Warncke, Kurt

    2009-09-01

    Electron spin echo envelope modulation (ESEEM) is a technique of pulsed-electron paramagnetic resonance (EPR) spectroscopy. The analyis of ESEEM data to extract information about the nuclear and electronic structure of a disordered (powder) paramagnetic system requires accurate and efficient numerical simulations. A single coupled nucleus of known nuclear g value (g(N)) and spin I=1 can have up to eight adjustable parameters in the nuclear part of the spin Hamiltonian. We have developed OPTESIM, an ESEEM simulation toolbox, for automated numerical simulation of powder two- and three-pulse one-dimensional ESEEM for arbitrary number (N) and type (I, g(N)) of coupled nuclei, and arbitrary mutual orientations of the hyperfine tensor principal axis systems for N>1. OPTESIM is based in the Matlab environment, and includes the following features: (1) a fast algorithm for translation of the spin Hamiltonian into simulated ESEEM, (2) different optimization methods that can be hybridized to achieve an efficient coarse-to-fine grained search of the parameter space and convergence to a global minimum, (3) statistical analysis of the simulation parameters, which allows the identification of simultaneous confidence regions at specific confidence levels. OPTESIM also includes a geometry-preserving spherical averaging algorithm as default for N>1, and global optimization over multiple experimental conditions, such as the dephasing time (tau) for three-pulse ESEEM, and external magnetic field values. Application examples for simulation of (14)N coupling (N=1, N=2) in biological and chemical model paramagnets are included. Automated, optimized simulations by using OPTESIM lead to a convergence on dramatically shorter time scales, relative to manual simulations.

  17. Amorphous Tin Oxide as a Low-Temperature-Processed Electron-Transport Layer for Organic and Hybrid Perovskite Solar Cells

    KAUST Repository

    Barbe, Jeremy

    2017-02-08

    Chemical bath deposition (CBD) of tin oxide (SnO) thin films as an electron-transport layer (ETL) in a planar-heterojunction n-i-p organohalide lead perovskite and organic bulk-heterojunction (BHJ) solar cells is reported. The amorphous SnO (a-SnO) films are grown from a nontoxic aqueous bath of tin chloride at a very low temperature (55 °C) and do not require postannealing treatment to work very effectively as an ETL in a planar-heterojunction n-i-p organohalide lead perovskite or organic BHJ solar cells, in lieu of the commonly used ETL materials titanium oxide (TiO) and zinc oxide (ZnO), respectively. Ultraviolet photoelectron spectroscopy measurements on the glass/indium-tin oxide (ITO)/SnO/methylammonium lead iodide (MAPbI)/2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene device stack indicate that extraction of photogenerated electrons is facilitated by a perfect alignment of the conduction bands at the SnO/MAPbI interface, while the deep valence band of SnO ensures strong hole-blocking properties. Despite exhibiting very low electron mobility, the excellent interfacial energetics combined with high transparency (E > 4 eV) and uniform substrate coverage make the a-SnO ETL prepared by CBD an excellent candidate for the potentially low-cost and large-scale fabrication of organohalide lead perovskite and organic photovoltaics.

  18. Liquid Water- and Heat-Resistant Hybrid Perovskite Photovoltaics via an Inverted ALD Oxide Electron Extraction Layer Design.

    Science.gov (United States)

    Kim, In Soo; Cao, Duyen H; Buchholz, D Bruce; Emery, Jonathan D; Farha, Omar K; Hupp, Joseph T; Kanatzidis, Mercouri G; Martinson, Alex B F

    2016-12-14

    Despite rapid advances in conversion efficiency (>22%), the environmental stability of perovskite solar cells remains a substantial barrier to commercialization. Here, we show a significant improvement in the stability of inverted perovskite solar cells against liquid water and high operating temperature (100 °C) by integrating an ultrathin amorphous oxide electron extraction layer via atomic layer deposition (ALD). These unencapsulated inverted devices exhibit a stable operation over at least 10 h when subjected to high thermal stress (100 °C) in ambient environments, as well as upon direct contact with a droplet of water without further encapsulation.

  19. Perovskite oxide SrTiO3 as an efficient electron transporter for hybrid perovskite solar cells

    KAUST Repository

    Bera, Ashok

    2014-12-11

    In this work, we explored perovskite oxide SrTiO3 (STO) for the first time as the electron-transporting layer in organolead trihalide perovskite solar cells. The steady-state photoluminescence (PL) quenching and transient absorption experiments revealed efficient photoelectron transfer from CH3NH3PbI3-xClx to STO. Perovskite solar cells with meso-STO exhibit an open circuit voltage of 1.01 V, which is 25% higher than the value of 0.81 V achieved in the control device with the conventional meso-TiO2. In addition, an increase of 17% in the fill factor was achieved by tailoring the thickness of the meso-STO layer. We found that the application of STO leads to uniform perovskite layers with large grains and complete surface coverage, leading to a high shunt resistance and improved performance. These findings suggest STO as a competitive candidate as electron transport material in organometal perovskite solar cells.

  20. Photoinduced electron transfer pathways in hydrogen-evolving reduced graphene oxide-boosted hybrid nano-bio catalyst.

    Science.gov (United States)

    Wang, Peng; Dimitrijevic, Nada M; Chang, Angela Y; Schaller, Richard D; Liu, Yuzi; Rajh, Tijana; Rozhkova, Elena A

    2014-08-26

    Photocatalytic production of clean hydrogen fuels using water and sunlight has attracted remarkable attention due to the increasing global energy demand. Natural and synthetic dyes can be utilized to sensitize semiconductors for solar energy transformation using visible light. In this study, reduced graphene oxide (rGO) and a membrane protein bacteriorhodopsin (bR) were employed as building modules to harness visible light by a Pt/TiO2 nanocatalyst. Introduction of the rGO boosts the nano-bio catalyst performance that results in hydrogen production rates of approximately 11.24 mmol of H2 (μmol protein)(-1) h(-1). Photoelectrochemical measurements show a 9-fold increase in photocurrent density when TiO2 electrodes were modified with rGO and bR. Electron paramagnetic resonance and transient absorption spectroscopy demonstrate an interfacial charge transfer from the photoexcited rGO to the semiconductor under visible light.

  1. Energetic stability, oxidation states, and electronic structure of Bi-doped NaTaO3: a first-principles hybrid functional study.

    Science.gov (United States)

    Joo, Paul H; Behtash, Maziar; Yang, Kesong

    2016-01-14

    We studied the defect formation energies, oxidation states of the dopants, and electronic structures of Bi-doped NaTaO3 using first-principles hybrid density functional theory calculations. Three possible structural models, including Bi-doped NaTaO3 with Bi at the Na site (Bi@Na), with Bi at the Ta site (Bi@Ta), and with Bi at both Na and Ta sites [Bi@(Na,Ta)], are constructed. Our results show that the preferred doping sites of Bi are strongly related to the preparation conditions of NaTaO3. It is energetically more favorable to form a Bi@Na structure under Na-poor conditions, to form a Bi@Ta structure under Na-rich conditions, and to form a Bi@(Na,Ta) structure under mildly Na-rich conditions. The Bi@Na doped model shows an n-type conducting character along with an expected blueshift of the optical absorption edge, in which the Bi atoms exist as Bi(3+) (6s(2)6p(0)). The Bi@Ta doped model has empty gap states consisting of Bi 6s states in its band gap, which can lead to visible-light absorption via the electron transition among the valence band, the conduction band, and the gap states. The Bi dopant is present as a Bi(5+) ion in this model, consistent with the experimental results. In contrast, the Bi@(Na,Ta) doped model has occupied gap states consisting of Bi 6s states in its band gap, and thus visible-light absorption is also expected in this system due to electron excitation from these occupied states to the conduction band, in which the Bi dopants exist as Bi(3+) ions. Our first-principles electronic structure calculations revealed the relationship between the Bi doping sites and the material preparation conditions, and clarified the oxidation states of Bi dopants in NaTaO3 as well as the origin of different visible-light photocatalytic hydrogen evolution behaviors in Bi@Ta and Bi@(Na,Ta) doped NaTaO3. This work can provide a useful reference for preparing a Bi-doped NaTaO3 photocatalyst with desired doping sites.

  2. Real-space and plane-wave hybrid method for electronic structure calculations for two-dimensional materials

    Science.gov (United States)

    Do, V. Nam; Le, H. Anh; Vu, V. Thieu

    2017-04-01

    We propose a computational approach to combining the plane-wave method and the real-space treatment to describe the periodic variation in the material plane and the decay of wave functions from the material surfaces. The proposed approach is natural for two-dimensional material systems and thus may circumvent some intrinsic limitations involving the artificial replication of material layers in traditional supercell methods. In particular, we show that the proposed method is easy to implement and, especially, computationally effective since low-cost computational algorithms, such as iterative and recursive techniques, can be used to treat matrices with block tridiagonal structure. Using this approach we show first-principles features that supplement the current knowledge of some fundamental issues in bilayer graphene systems, including the coupling between the two graphene layers, the preservation of the σ band of monolayer graphene in the electronic structure of the bilayer system, and the differences in low-energy band structure between the AA- and AB-stacked configurations.

  3. A zero dimensional hybrid organic-inorganic perovskite ZnCl4 based: Synthesis, crystal structure, UV-vis, and electronic properties

    Science.gov (United States)

    El Mrabet, Rajae; Kassou, Said; Tahiri, Obaida; Belaaraj, Abdesselam; El Ammari, Lahcen; Saadi, Mohamed

    2017-08-01

    A low dimensional hybrid perovskite-like system [H3Nsbnd (CH2)8sbnd NH3]ZnCl4 was synthesized by slow evaporation method at room temperature. Single crystal X-ray diffraction was used to characterize the crystal structure. The compound crystallizes into triclinic system P-1 space group with mutually surrounded inorganic (ZnCl4)-2 organic (H3Nsbnd (CH2)8sbnd NH3) entities, and the following unit cell parameters: a = 6.9998(1) Å, b = 10.7846(2) Å, c = 11.0332(2) Å, α = 83.1730(10)°, β = 82.0490(10)°, γ = 73.2820(10)°, V = 787.27(2) Å3 and Z = 2. The optical band gap deduced from UV-visible spectroscopy was found to be 4.9 eV. Hirshfeld surface analysis shows the importance of hydrogen bonding interactions to ensure the cohesion of the studied crystal. The band structures and electronic properties, such as total and partial densities of state, were investigated by density functional theory (DFT) using a local LDA and semi local GGA approaches. The obtained results reveal the insulating behavior of the material.

  4. Hybrid photon detectors

    CERN Document Server

    D'Ambrosio, C

    2003-01-01

    Hybrid photon detectors detect light via vacuum photocathodes and accelerate the emitted photoelectrons by an electric field towards inversely polarized silicon anodes, where they are absorbed, thus producing electron-hole pairs. These, in turn, are collected and generate electronic signals on their ohmic contacts. This review first describes the characteristic properties of the main components of hybrid photon detectors: light entrance windows, photocathodes, and silicon anodes. Then, essential relations describing the trajectories of photoelectrons in electric and magnetic fields and their backscattering from the silicon anodes are derived. Depending on their anode configurations, three families of hybrid photon detectors are presented: hybrid photomultiplier tubes with single anodes for photon counting with high sensitivity and for gamma spectroscopy; multi-anode photon detector tubes with anodes subdivided into square or hexagonal pads for position-sensitive photon detection; imaging silicon pixel array t...

  5. Hybrid silicon evanescent devices

    Directory of Open Access Journals (Sweden)

    Alexander W. Fang

    2007-07-01

    Full Text Available Si photonics as an integration platform has recently been a focus of optoelectronics research because of the promise of low-cost manufacturing based on the ubiquitous electronics fabrication infrastructure. The key challenge for Si photonic systems is the realization of compact, electrically driven optical gain elements. We review our recent developments in hybrid Si evanescent devices. We have demonstrated electrically pumped lasers, amplifiers, and photodetectors that can provide a low-cost, scalable solution for hybrid integration on a Si platform by using a novel hybrid waveguide architecture, consisting of III-V quantum wells bonded to Si waveguides.

  6. Hybrid Baryons

    CERN Document Server

    Page, P R

    2003-01-01

    We review the status of hybrid baryons. The only known way to study hybrids rigorously is via excited adiabatic potentials. Hybrids can be modelled by both the bag and flux-tube models. The low-lying hybrid baryon is N 1/2^+ with a mass of 1.5-1.8 GeV. Hybrid baryons can be produced in the glue-rich processes of diffractive gamma N and pi N production, Psi decays and p pbar annihilation.

  7. Determination of the electronic, dielectric, and optical properties of sillenite Bi12TiO20 and perovskite-like Bi4Ti3O12 materials from hybrid first-principle calculations

    KAUST Repository

    Lardhi, Sheikha F.

    2016-04-05

    Density functional theory calculation was conducted to determine the optoelectronic properties of bismuthtitanate sillenite (Bi12TiO20) and perovskite-like (Bi4Ti3O12) structures. The lattice parameters were experimentally obtained from Rietveld analysis. The density functional perturbation theory approach was used with the standard Perdew–Burke–Ernzerhof functional and screened Coulomb hybrid Heyd–Scuseria–Ernzerhof functional to investigate the electronic structure and absorption coefficient. Both compounds have good carrier transport properties, low effective hole and electron masses, high dielectric constant, and low exciton binding energy.

  8. 浅析任璧莲小说《典型的美国佬》中的身份认同%On Identity in Gish Jen's Novel Typical American——Every American is American

    Institute of Scientific and Technical Information of China (English)

    章晶

    2011-01-01

    Since the founding of the United States,"Who I am?" has been a question lingering on the Americans,especially on ethnic minorities.The mainstream hegemonic culture used to essentialize the external physical characteristics of ethnic minorities to define the identities of those ethnic Americans,making them the permanent "otherness",different from the American whites.In her novel,the Chinese-American writer Gish Jen questioned racial identity which had always been popular in the mainstream culture,redefined ethnic identity in terms of free choice of cultural property by telling an American story of Chinese immigrants,and illustrated her insights into American identity that "every American is American",going beyond conventional identity of minorities in the whites' eye.%"我是谁"是自美国建国以来一直萦绕于美国人,尤其是美国少数族裔心头的身份难题。主流霸权文化往往将少数族裔的外在生理特征本质化来定义美国少数族裔,使他们成为不同于美国白人的永久的"他者"。而华裔美国作家任璧莲质疑主流文化中固有的种族概念,在其小说《典型的美国佬》中通过讲述华人移民的美国故事,阐明了族裔身份认同是文化属性自由选择的结果,表明了她对人人都是美国人的身份认同,最终超越了美国白人的认同主题。

  9. High-Pressure Single-Crystal Structures of 3D Lead-Halide Hybrid Perovskites and Pressure Effects on their Electronic and Optical Properties.

    Science.gov (United States)

    Jaffe, Adam; Lin, Yu; Beavers, Christine M; Voss, Johannes; Mao, Wendy L; Karunadasa, Hemamala I

    2016-04-27

    We report the first high-pressure single-crystal structures of hybrid perovskites. The crystalline semiconductors (MA)PbX3 (MA = CH3NH3 (+), X = Br(-) or I(-)) afford us the rare opportunity of understanding how compression modulates their structures and thereby their optoelectronic properties. Using atomic coordinates obtained from high-pressure single-crystal X-ray diffraction we track the perovskites' precise structural evolution upon compression. These structural changes correlate well with pressure-dependent single-crystal photoluminescence (PL) spectra and high-pressure bandgaps derived from density functional theory. We further observe dramatic piezochromism where the solids become lighter in color and then transition to opaque black with compression. Indeed, electronic conductivity measurements of (MA)PbI3 obtained within a diamond-anvil cell show that the material's resistivity decreases by 3 orders of magnitude between 0 and 51 GPa. The activation energy for conduction at 51 GPa is only 13.2(3) meV, suggesting that the perovskite is approaching a metallic state. Furthermore, the pressure response of mixed-halide perovskites shows new luminescent states that emerge at elevated pressures. We recently reported that the perovskites (MA)Pb(Br x I1-x )3 (0.2 solar cells employing these absorbers. Our high-pressure PL data indicate that compression can mitigate this PL redshift and may afford higher steady-state voltages from these absorbers. These studies show that pressure can significantly alter the transport and thermodynamic properties of these technologically important semiconductors.

  10. Selective sequential separation of ABS/HIPS and PVC from automobile and electronic waste shredder residue by hybrid nano-Fe/Ca/CaO assisted ozonisation process.

    Science.gov (United States)

    Mallampati, Srinivasa Reddy; Lee, Byoung Ho; Mitoma, Yoshiharu; Simion, Cristian

    2017-02-01

    The separation of plastics containing brominated flame retardants (BFR) like (acrylonitrile-butadiene-styrene (ABS), high-impact polystyrene (HIPS), and polyvinyl chloride (PVC)) from automobile and electronic waste shredder residue (ASR/ESR) are a major concern for thermal recycling. In laboratory scale tests using a hybrid nano-Fe/Ca/CaO assisted ozonation treatment has been found to selectively hydrophilize the surface of ABS/HIPS and PVC plastics, enhancing ABS wettability and thereby promoting its separation from ASR/ESR by means of froth flotation. The water contact angles, of ABS/HIPS and PVC decreased, about 18.7°, 18.3°, and 17.9° in ASR and about 21.2°, 20.7°, and 20.0° in ESR respectively. SEM-EDS, FT-IR, and XPS analyses demonstrated a marked decrease in [Cl] and a significant increase in the number of hydrophilic groups, such as CO, CO, and (CO)O, on the PVC or ABS surface. Under froth flotation conditions at 50rpm, about 99.1% of combined fraction of ABS/HIPS in ASR samples and 99.6% of ABS/HIPS in ESR samples were separated as settled fraction. After separation, the purity of the recovered combined ABS/HIPS fraction was 96.5% and 97.6% in ASR and ESR samples respectively. Furthermore, at 150rpm a 100% PVC separation in the settled fraction, with 98% and 99% purity in ASR and ESR plastics, respectively. Total recovery of non-ABS/HIPS and PVC plastics reached nearly 100% in the floating fraction. Further, this process improved the quality of recycled ASR/ESR plastics by removing surface contaminants or impurities.

  11. Self-genomic in situ Hybridization Analysis of Peanut%花生自身基因组原位杂交分析

    Institute of Scientific and Technical Information of China (English)

    杨飞; 龙舟锴; 徐延浩; 张文英

    2013-01-01

    利用自身基因组荧光原位杂交技术,对花生(Arachis hypogaea L.)进行自身基因组原位杂交分析.结果显示,杂交信号沿所有染色体的全长分布,染色体着丝粒区、近着丝粒区和部分DAPI深染的区域存在强烈的杂交信号,染色体远端的杂交信号偏弱,染色体上存在少数未观察到杂交信号的DAPI深染区域.花生自身基因组原位杂交存在明显的非均匀染色体杂交带型,这说明基因区成簇分布在小的染色体区域并被重复序列间隔开.%Self-genomic in situ hybridization (self-GISH) analysis was performed on peanut (Arachis hypogaea L.) metaphase chromosome and interphase nucleus.The results showed that hybridization signals were dispersed along the chromosome length.The strong signals were mostly detected in the centromeric,pericentromeric and some of the DAPI positive regions.The weak signals were observed in the distal of chromosome regions.Some DAPI positive regions were not labeled with any signal.The non-uniform self-GISH pattern of peanut indicated that the gene rich clusters were located at small regions of chromosome and disrupted by large segmental of repetitive DNA.

  12. Behavioure of high energy electrons on tokamak with low hybrid current drive%托卡马克中低杂波电流驱动下高能电子行为分析

    Institute of Scientific and Technical Information of China (English)

    竹锦霞

    2016-01-01

    Fast electrons and runaway electrons constitute the high-energy tail of electron maxwell distribution during low hy-brid current drive. High energy fast electron can effectively carry current driving to achieve no-induced current drive due to low collision frequency. But under certain conditions,fast electron can turn into runaway electron. It will damage to the device first wall material. This paper studies fast electron distribution and the runaway electrons generation by means of fast electron bremsstrahlung array and runaway electron diagnose. The conversion phenomenon from fast electron to runaway electron can be analyzed.%在低杂波电流驱动下,快电子和逃逸电子构成了非麦克斯韦电子分布的高能尾部。高能快电子由于低的碰撞频率可以有效的携带电流来实现非感应电流驱动。但是在一定条件下,快电子可以转化为高能逃逸电子,这将对装置第一壁材料造成损伤。本文利用快电子轫致辐射测量以及逃逸电子诊断系统研究了低杂波电流驱动下快电子分布和逃逸电子的产生,并分析了快电子转化为逃逸电子的现象。

  13. Observation of a pressure-induced As-As hybridization associated with a change in the electronic state of Fe in the tetragonal phase of EuFe2As2.

    Science.gov (United States)

    Kobayashi, Hisao; Ikeda, Shugo; Sakaguchi, Yui; Yoda, Yoshitaka; Nakamura, Hiroki; Machida, Masahiko

    2013-01-16

    The electronic and vibrational properties of EuFe(2)As(2) in the tetragonal phase between 0 and 5 GPa have been investigated using (57)Fe Mössbauer spectroscopy and (57)Fe nuclear resonance inelastic scattering, respectively. We find a discontinuous increase of the center shift around 2.3 GPa, reflecting a change of the electronic state of Fe, and above 2.5 GPa a softening of the optical phonon modes associated with an increase of the relative volume of the FeAs(4) tetrahedron in the unit cell. Our findings reveal that an effective As-As hybridization along the c axis appears at approximately 2.3 GPa in the tetragonal phase of EuFe(2)As(2), along with a change in the electronic state of Fe, causing bulk superconductivity to appear at a low temperature. Consequently, the change in the electronic state of the Fe atom and the effective As-As hybridization play key roles in the pressure-induced superconductivity in the tetragonal phase of AFe(2)As(2).

  14. Hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    West, J.G.W. [Electrical Machines (United Kingdom)

    1997-07-01

    The reasons for adopting hybrid vehicles result mainly from the lack of adequate range from electric vehicles at an acceptable cost. Hybrids can offer significant improvements in emissions and fuel economy. Series and parallel hybrids are compared. A combination of series and parallel operation would be the ideal. This can be obtained using a planetary gearbox as a power split device allowing a small generator to transfer power to the propulsion motor giving the effect of a CVT. It allows the engine to run at semi-constant speed giving better fuel economy and reduced emissions. Hybrid car developments are described that show the wide range of possible hybrid systems. (author)

  15. Hybrid codes: Methods and applications

    Energy Technology Data Exchange (ETDEWEB)

    Winske, D. (Los Alamos National Lab., NM (USA)); Omidi, N. (California Univ., San Diego, La Jolla, CA (USA))

    1991-01-01

    In this chapter we discuss hybrid'' algorithms used in the study of low frequency electromagnetic phenomena, where one or more ion species are treated kinetically via standard PIC methods used in particle codes and the electrons are treated as a single charge neutralizing massless fluid. Other types of hybrid models are possible, as discussed in Winske and Quest, but hybrid codes with particle ions and massless fluid electrons have become the most common for simulating space plasma physics phenomena in the last decade, as we discuss in this paper.

  16. Transmission of the Aegilops ovata chromosomes carrying gametocidal factors in hexaploid triticale (×Triticosecale Wittm.) hybrids.

    Science.gov (United States)

    Kwiatek, M; Majka, M; Ślusarkiewicz-Jarzina, A; Ponitka, A; Pudelska, H; Belter, J; Wiśniewska, H

    2016-08-01

    The main aim of this work was to induce the chromosome rearrangements between Aegilops ovata (UUMM) and hexaploid triticale (AABBRR) by expression of the gametocidal factor located on the chromosome 4M. The Aegilops ovata × Secale cereale (UUMMRR) amphiploids and triticale 'Moreno' were used to produce hybrids by reciprocal crosses. Chromosome dynamics was observed in subsequent generations of hybrids during mitotic metaphase of root meristems and first metaphase of meiosis of pollen mother cells. Chromosomes were identified by genomic in situ hybridisation (GISH) and fluorescence in situ hybridisation (FISH) using pTa71, pTa791, pSc119.2 and pAs1 DNA probes. It has been shown that the origin of the genetic background had an influence on Aegilops chromosome transmission. Moreover, it has been reported that the preferential transmission of chromosome 4M appeared during both androgenesis and gynogenesis. It is also hypothesised that the expression of the triticale Gc gene suppressor had an influence on the semi-fertility of hybrids but did not inhibit the chromosome rearrangements. This paper also describes the double haploid production, which enabled to obtain plants with two identical copies of triticale chromosomes with translocations of Aegilops chromatin segments.

  17. Hybrid Si/TMD 2D electronic double channels fabricated using solid CVD few-layer-MoS2 stacking for Vth matching and CMOS-compatible 3DFETs

    KAUST Repository

    Chen, Min Cheng

    2014-12-01

    Stackable 3DFETs such as FinFET using hybrid Si/MoS2 channels were developed using a fully CMOS-compatible process. Adding several molecular layers (3-16 layers) of the transition-metal dichalcogenide (TMD), MoS2 to Si fin and nanowire resulted in improved (+25%) Ion,n of the FinFET and nanowire FET (NWFET). The PFETs also operated effectively and the N/P device Vth are low and matched perfectly. The proposed heterogeneous Si/TMD 3DFETs can be useful in future electronics. © 2014 IEEE.

  18. GW quasiparticle band gap of the hybrid organic-inorganic perovskite CH$_3$NH$_3$PbI$_3$: Effect of spin-orbit interaction, semicore electrons, and self-consistency

    OpenAIRE

    Filip, Marina R.; Giustino, Feliciano

    2014-01-01

    We study the quasiparticle band gap of the hybrid organic-inorganic lead halide perovskite CH$_3$NH$_3$PbI$_3$, using many-body perturbation theory based on the $GW$ approximation. We perform a systematic analysis of the band gap sensitivity to relativistic spin-orbit effects, to the description of semicore Pb-5$d$ and I-4$d$ electrons, and to the starting Kohn-Sham eigenvalues. We find that the inclusion of semicore states increases the calculated band gap by 0.2 eV, and self-consistency on ...

  19. Printed hybrid systems

    Science.gov (United States)

    Karioja, Pentti; Mäkinen, Jukka-Tapani; Keränen, Kimmo; Aikio, Janne; Alajoki, Teemu; Jaakola, Tuomo; Koponen, Matti; Keränen, Antti; Heikkinen, Mikko; Tuomikoski, Markus; Suhonen, Riikka; Hakalahti, Leena; Kopola, Pälvi; Hast, Jukka; Liedert, Ralf; Hiltunen, Jussi; Masuda, Noriyuki; Kemppainen, Antti; Rönkä, Kari; Korhonen, Raimo

    2012-04-01

    This paper presents research activities carried out at VTT Technical Research Centre of Finland in the field of hybrid integration of optics, electronics and mechanics. Main focus area in our research is the manufacturing of electronic modules and product structures with printed electronics, film-over-molding and polymer sheet lamination technologies and the goal is in the next generation of smart systems utilizing monolithic polymer packages. The combination of manufacturing technologies such as roll-to-roll -printing, injection molding and traditional component assembly is called Printed Hybrid Systems (PHS). Several demonstrator structures have been made, which show the potential of polymer packaging technology. One demonstrator example is a laminated structure with embedded LED chips. Element thickness is only 0.3mm and the flexible stack of foils can be bent in two directions after assembly process and was shaped curved using heat and pressure. The combination of printed flexible circuit boards and injection molding has also been demonstrated with several functional modules. The demonstrators illustrate the potential of origami electronics, which can be cut and folded to 3D shapes. It shows that several manufacturing process steps can be eliminated by Printed Hybrid Systems technology. The main benefits of this combination are small size, ruggedness and conformality. The devices are ideally suited for medical applications as the sensitive electronic components are well protected inside the plastic and the structures can be cleaned easily due to the fact that they have no joints or seams that can accumulate dirt or bacteria.

  20. Analog and hybrid computing

    CERN Document Server

    Hyndman, D E

    2013-01-01

    Analog and Hybrid Computing focuses on the operations of analog and hybrid computers. The book first outlines the history of computing devices that influenced the creation of analog and digital computers. The types of problems to be solved on computers, computing systems, and digital computers are discussed. The text looks at the theory and operation of electronic analog computers, including linear and non-linear computing units and use of analog computers as operational amplifiers. The monograph examines the preparation of problems to be deciphered on computers. Flow diagrams, methods of ampl

  1. Chromosome Behavior of Pollen Mother Cell Meiosis in the Hybrid Progenies from Triticum timopheevi ×Avena fatua L.var.glabrata Pat%提莫菲维小麦与光稃野燕麦远缘杂交后代花粉母细胞减数分裂行为分析

    Institute of Scientific and Technical Information of China (English)

    安洪周; 胡梅; 郑会敏; 张素勤; 张庆勤

    2013-01-01

    The chromosomic meiotic behavior of pollen mother cells (PMCs) of the hybrid progenies from Triticum timopheevi ×Avena fatua L.var.glabrata Pat was researched by general cytology and genomic in situ hybridization (GISH) in the present study.The results showed that the PMCs meiotic index of the F3 line was 87.46,indicating some genetic instability.4 pairs of red hybridization signals were found in the PMCs at the metaphase Ⅰ by GISH analysis,and there was a red signal in each dissociative univalent.Some lagging chromosome,chromosome bridges and micronuclei were discovered at the anaphase Ⅰ,anaphase Ⅱ and telophase Ⅱ,with the percentage of 10.58%,1.92% and 12.36%,respectively.Wheat homologues or homoeologues normally pairing was interfered by the wild oat chromatin might lead to these abnormal phenomena.%通过普通细胞学和基因组原位杂交(GISH)研究提莫菲维小麦(Triticum timopheevi)与光稃野燕麦(Avena fatua L.var.glabrata Pat)远缘杂交后代花粉母细胞染色体减数分裂行为.结果表明,该R株系花粉母细胞的减数分裂指数为87.46,表现出一定的遗传不稳定性.GISH分析发现该F3株系中期I细胞中有4对红色杂交信号,且游离的单价体上各有1个杂交信号;后期Ⅰ、后期Ⅱ和末期Ⅱ出现落后染色体、染色体桥、微核等现象,分别占观察数的10.58%、1.92%和12.36%,这些异常现象可能是由于光稃野燕麦遗传物质干扰了小麦同源染色体或部分同源染色体的正常配对造成的.

  2. Dispersion Relation Tool for generalized lower-hybrid mode with, density gradient, equilibrium ExB drift, collisions and finite electron Larmor radius

    CERN Document Server

    Romadanov, Ivan; Frias, Winston; Chapurin, Oleksandr; Koshkarov, Oleksandr

    2016-01-01

    MATLAB solver has been developed for studies of local instabilities in partially magnetized plasmas typical for ExB discharge plasmas. Examples for the Simon-Hoh, lower-hybrid and ion-sound instabilities in Penning discharge. The detailed behavior of the local dispersion relation can be investigated, plotted and saved with this solver. It allows to include various effects, change plasma parameters and obtain eigen-frequencies as a function of the wavenumbers in x or y directions.

  3. Hybrid Metaheuristics

    CERN Document Server

    2013-01-01

    The main goal of this book is to provide a state of the art of hybrid metaheuristics. The book provides a complete background that enables readers to design and implement hybrid metaheuristics to solve complex optimization problems (continuous/discrete, mono-objective/multi-objective, optimization under uncertainty) in a diverse range of application domains. Readers learn to solve large scale problems quickly and efficiently combining metaheuristics with complementary metaheuristics, mathematical programming, constraint programming and machine learning. Numerous real-world examples of problems and solutions demonstrate how hybrid metaheuristics are applied in such fields as networks, logistics and transportation, bio-medical, engineering design, scheduling.

  4. A Comparative Analysis of Different Finishing and Polishing Devices on Nanofilled, Microfilled, and Hybrid Composite: A Scanning Electron Microscopy and Profilometric Study.

    Science.gov (United States)

    Yadav, Rishi D; Raisingani, Deepak; Jindal, Divya; Mathur, Rachit

    2016-01-01

    The continuous development of esthetically acceptable adhesive restorative material has made a variety of tooth-colored materials available for clinical use. The advent of visible light polymerizing resin and the use of finer filler particles permit resin composites to be polished to higher degree. The effect of polishing systems on surface finish has been reported to be material-dependent, and the effectiveness of these systems was mostly product-dependent. Hence, the purpose of this study was to evaluate the efficiency of finishing and polishing systems on the surface roughness of nanofilled, microfilled, and hybrid composite restorative materials available in the market.

  5. Effect of p–d hybridization, structural distortion and cation electronegativity on electronic properties of ZnSnX{sub 2} (X=P, As, Sb) chalcopyrite semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, S. [National Institute of Technology, Rourkela 769008, Odisha (India); Ganguli, B., E-mail: biplabg@nitrkl.ac.in [National Institute of Technology, Rourkela 769008, Odisha (India)

    2013-04-15

    Significant effects of p–d hybridization, structural distortion and cation-electro-negativity are found on band gap in ZnSnX{sub 2} (X=P, As, Sb). Our study suggests these compounds to be direct band gap semiconductors with band gaps of 1.23, 0.68 and 0.19 eV respectively. Lattice constants, tetragonal distortion (η), anion displacement, bond lengths and bulk moduli are calculated by Density Functional Theory based on Tight binding Linear Muffin-Tin orbital method. Our result of structural properties is in good agreement with the available experimental and other theoretical results. Calculated band gaps also agree well with the experimental works within LDA limitation. Unlike other semiconductors in the group II–IV–V{sub 2}, there is a reduction in the band gap of 0.22, 0.20 and 0.24 eV respectively in ZnSnX{sub 2} (X=P, As, Sb) due to p–d hybridization. Structural distortion decreases band gap by 0.20, 0.12 and 0.10 eV respectively. We find that cation electronegativity effect is responsible for increasing the band gap relative to their binary analogs GaInP{sub 2}, InGaAs{sub 2} and GaInSb{sub 2} respectively and increment are 0.13, 0.04 and 0.13 eV respectively. - Graphical abstract: One unit cell of ZnSnX{sub 2} (X=P, As, Sb) chalcopyrite semiconductor. Semiconductors ZnSnX{sub 2} (X=P, As, Sb) are found to be direct band gap semiconductors with band gaps 1.23, 0.68 and 0.19 eV respectively. The quantitative estimate of effects of p–d hybridization, structural distortion and cation electronegativity shows band gaps change significantly due to these effects. Highlights: ► ZnSnX{sub 2} (X=P, As, Sb) are direct band gap semiconductors. ► These have band gaps of 1.23 eV, 0.68 eV and 0.19 eV respectively. ► The band gap reduction due to p–d hybridization is 13.41%, 18.51% and 40% respectively. ► Band gap reduction due to structural distortion is 12.12%, 11.11% and 16.66% respectively. ► Band gap increases 8.38%, 3.70% and 21.31% respectively

  6. Asexual Reproduction Does Not Apparently Increase the Rate of Chromosomal Evolution: Karyotype Stability in Diploid and Triploid Clonal Hybrid Fish (Cobitis, Cypriniformes, Teleostei).

    Science.gov (United States)

    Majtánová, Zuzana; Choleva, Lukáš; Symonová, Radka; Ráb, Petr; Kotusz, Jan; Pekárik, Ladislav; Janko, Karel

    2016-01-01

    Interspecific hybridization, polyploidization and transitions from sexuality to asexuality considerably affect organismal genomes. Especially the last mentioned process has been assumed to play a significant role in the initiation of chromosomal rearrangements, causing increased rates of karyotype evolution. We used cytogenetic analysis and molecular dating of cladogenetic events to compare the rate of changes of chromosome morphology and karyotype in asexually and sexually reproducing counterparts in European spined loach fish (Cobitis). We studied metaphases of three sexually reproducing species and their diploid and polyploid hybrid clones of different age of origin. The material includes artificial F1 hybrid strains, representatives of lineage originated in Holocene epoch, and also individuals of an oldest known age to date (roughly 0.37 MYA). Thereafter we applied GISH technique as a marker to differentiate parental chromosomal sets in hybrids. Although the sexual species accumulated remarkable chromosomal rearrangements after their speciation, we observed no differences in chromosome numbers and/or morphology among karyotypes of asexual hybrids. These hybrids possess chromosome sets originating from respective parental species with no cytogenetically detectable recombinations, suggesting their integrity even in a long term. The switch to asexual reproduction thus did not provoke any significant acceleration of the rate of chromosomal evolution in Cobitis. Asexual animals described in other case studies reproduce ameiotically, while Cobitis hybrids described here produce eggs likely through modified meiosis. Therefore, our findings indicate that the effect of asexuality on the rate of chromosomal change may be context-dependent rather than universal and related to particular type of asexual reproduction.

  7. Hybrid intermediaries

    OpenAIRE

    Cetorelli, Nicola

    2014-01-01

    I introduce the concept of hybrid intermediaries: financial conglomerates that control a multiplicity of entity types active in the "assembly line" process of modern financial intermediation, a system that has become known as shadow banking. The complex bank holding companies of today are the best example of hybrid intermediaries, but I argue that financial firms from the "nonbank" space can just as easily evolve into conglomerates with similar organizational structure, thus acquiring the cap...

  8. Hybrid composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available effect was observed for the elongation at break of the hybrid composites. The impact strength of the hybrid composites increased with the addition of glass fibres. The tensile and impact properties of thermoplastic natural rubber reinforced short... panels made from conventional structural materials. Figure 3 illustrates the performance of cellular biocomposite panels against conventional systems used for building and residential construction, namely a pre- cast pre-stressed hollow core concrete...

  9. Alleviating Surface Degradation of Nickel-Rich Layered Oxide Cathode Material by Encapsulating with Nanoscale Li-Ions/Electrons Superionic Conductors Hybrid Membrane for Advanced Li-Ion Batteries.

    Science.gov (United States)

    Li, Lingjun; Xu, Ming; Yao, Qi; Chen, Zhaoyong; Song, Liubin; Zhang, Zhian; Gao, Chunhui; Wang, Peng; Yu, Ziyang; Lai, Yanqing

    2016-11-16

    Nickel-rich layered oxide cathode materials for advanced lithium-ion batteries have received much attention recently because of their high specific capacities and significant reduction of cost. However, these cathodes are facing a fundamental challenge of loss in performance as a result of surface lithium residue, side reactions with the electrolyte and structure rearrangement upon long-term cycling. Herein, by capturing the lithium residue on the surface of LiNi0.8Co0.1Mn0.1O2 (NCM) cathode material as Li source, we propose a hybrid coating strategy incorporating lithium ions conductor LixAlO2 with superconductor LixTi2O4 to overcome those obstinate issues. By taking full advantage of this unique hybrid nanomembrane coating architecture, both the lithium ion diffusion ability and electronic conductivity of LiNi0.8Co0.1Mn0.1O2 cathode material are improved, resulting in remarkably enhanced electrochemical performances during high voltage operation, including good cycle performance, high reversible capacity, and excellent rate capability. A high initial discharge capacity of 227 mAh g(-1) at 4.4 V cutoff voltage with Coulombic efficiency of 87.3%, and reversible capacity of 200 mAh g(-1) with 98% capacity retention after 100 cycles at a current density of 0.5 C can be attained. The improved electrochemical performance can be attributed to the synergetic contribution from the removal of lithium residues and the unique hybrid nanomembrane coating architecture. Most importantly, this surface modification technique could save some cost, simplify the technical procedure, and show great potential to optimize battery performance, apply in a large scale and extend to all nickel-rich cathode material.

  10. A Hybrid Solid-State NMR and Electron Microscopy Structure-Determination Protocol for Engineering Advanced para-Crystalline Optical Materials.

    Science.gov (United States)

    Thomas, Brijith; Rombouts, Jeroen; Oostergetel, Gert T; Gupta, Karthick B S S; Buda, Francesco; Lammertsma, Koop; Orru, Romano; de Groot, Huub J M

    2017-03-08

    Hybrid magic-angle spinning (MAS) NMR spectroscopy and TEM were demonstrated for de novo structure determination of para-crystalline materials with a bioinspired fused naphthalene diimide (NDI)-salphen-phenazine prototype light-harvesting compound. Starting from chiral building blocks with C2 molecular symmetry, the asymmetric unit was determined by MAS NMR spectroscopy, index low-resolution TEM diffraction data, and resolve reflection conditions, and for the first time the ability to determine the space group from reciprocal space data using this hybrid approach was shown. Transfer of molecular C2 symmetry into P2/c packing symmetry provided a connection across length scales to overcome both lack of long-range order and missing diffraction-phase information. Refinement with heteronuclear distance constraints confirmed the racemic P2/c packing that was scaffolded by molecular recognition of salphen zinc in a pseudo-octahedral environment with bromide and with alkyl chains folding along the phenazine. The NDI light-harvesting stacks ran orthogonal to the intermolecular electric dipole moment present in the solid. Finally, the orientation of flexible lamellae on an electrode surface was determined. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  11. Additive Manufacturing of Hybrid Circuits

    Science.gov (United States)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  12. A simple approach to obtain hybrid Au-loaded polymeric nanoparticles with a tunable metal load† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06850a Click here for additional data file.

    Science.gov (United States)

    Luque-Michel, Edurne; Larrea, Ane; Lahuerta, Celia; Imbuluzqueta, Edurne; Arruebo, Manuel; Santamaría, Jesús

    2016-01-01

    A new strategy to nanoengineer multi-functional polymer–metal hybrid nanostructures is reported. By using this protocol the hurdles of most of the current developments concerning covalent and non-covalent attachment of polymers to preformed inorganic nanoparticles (NPs) are overcome. The strategy is based on the in situ reduction of metal precursors using the polymeric nanoparticle as a nanoreactor. Gold nanoparticles and poly(dl-lactic-co-glycolic acid), PLGA, are located in the core and shell, respectively. This novel technique enables the production of PLGA NPs smaller than 200 nm that bear either a single encapsulated Au NP or several smaller NPs with tunable sizes and a 100% loading efficiency. In situ reduction of Au ions inside the polymeric NPs was achieved on demand by using heat to activate the reductive effect of citrate ions. In addition, we show that the loading of the resulting Au NPs inside the PLGA NPs is highly dependent on the surfactant used. Electron microscopy, laser irradiation, UV-Vis and fluorescence spectroscopy characterization techniques confirm the location of Au nanoparticles. These promising results indicate that these hybrid nanomaterials could be used in theranostic applications or as contrast agents in dark-field imaging and computed tomography. PMID:26612770

  13. Divergent Development of Hexaploid Triticale by a Wheat - Rye -Psathyrostachys huashanica Trigeneric Hybrid Method.

    Science.gov (United States)

    Kang, Houyang; Wang, Hao; Huang, Juan; Wang, Yujie; Li, Daiyan; Diao, Chengdou; Zhu, Wei; Tang, Yao; Wang, Yi; Fan, Xing; Zeng, Jian; Xu, Lili; Sha, Lina; Zhang, Haiqin; Zhou, Yonghong

    2016-01-01

    Hexaploid triticale is an important forage crop and a promising energy plant. Some forms were previously reported for developing the hexaploid triticale, such as crossing tetraploid wheat or hexaploid wheat with rye, crossing hexaploid triticale and/or hexaploid wheat with octoploid triticale, and spontaneously appearing in the selfed progenies of octoploid triticale. In the present study, we developed an effective method for production of diverse types of hexaploid triticale via wheat-rye-Psathyrostachys huashanica trigeneric hybrid. Genomic in situ hybridization (GISH) and fluorescence in situ hybridization (FISH) karyotyping revealed that D genome chromosomes were completely eliminated and the whole A, B, and R genome chromosomes were retained in three lines. More interestingly, the composite genome of the line K14-489-2 consisted of complete A and B genomes and chromosomes 1D, 2R, 3R, 4R, 5R, 6R, and 7R, that of line K14-491-2 was 12 A-genome (1A-6A), 14 B-genome (1B-7B), 12 R-genome (1R-3R, 5R-7R), and chromosomes 1D and 3D, and that of the line K14-547-1 had 26A/B and 14R chromosomes, plus one pair of centric 6BL/2DS translocations. This finding implies that some of D genome chromosomes can be spontaneously and stably incorporated into the hexaploid triticale. Additionally, a variety of high-molecular-weight glutenin subunits (HMW-GS) compositions were detected in the six hexaploid triticale lines, respectively. Besides, compared with its recurrent triticale parent Zhongsi828, these lines showed high level of resistance to stripe rust (Puccinia striiformis f. sp. tritici, Pst) pathogens prevalent in China, including V26/Gui 22. These new hexaploid triticales not only enhanced diversification of triticale but also could be utilized as valuable germplasm for wheat improvement.

  14. Divergent Development of Hexaploid Triticale by a Wheat - Rye -Psathyrostachys huashanica Trigeneric Hybrid Method.

    Directory of Open Access Journals (Sweden)

    Houyang Kang

    Full Text Available Hexaploid triticale is an important forage crop and a promising energy plant. Some forms were previously reported for developing the hexaploid triticale, such as crossing tetraploid wheat or hexaploid wheat with rye, crossing hexaploid triticale and/or hexaploid wheat with octoploid triticale, and spontaneously appearing in the selfed progenies of octoploid triticale. In the present study, we developed an effective method for production of diverse types of hexaploid triticale via wheat-rye-Psathyrostachys huashanica trigeneric hybrid. Genomic in situ hybridization (GISH and fluorescence in situ hybridization (FISH karyotyping revealed that D genome chromosomes were completely eliminated and the whole A, B, and R genome chromosomes were retained in three lines. More interestingly, the composite genome of the line K14-489-2 consisted of complete A and B genomes and chromosomes 1D, 2R, 3R, 4R, 5R, 6R, and 7R, that of line K14-491-2 was 12 A-genome (1A-6A, 14 B-genome (1B-7B, 12 R-genome (1R-3R, 5R-7R, and chromosomes 1D and 3D, and that of the line K14-547-1 had 26A/B and 14R chromosomes, plus one pair of centric 6BL/2DS translocations. This finding implies that some of D genome chromosomes can be spontaneously and stably incorporated into the hexaploid triticale. Additionally, a variety of high-molecular-weight glutenin subunits (HMW-GS compositions were detected in the six hexaploid triticale lines, respectively. Besides, compared with its recurrent triticale parent Zhongsi828, these lines showed high level of resistance to stripe rust (Puccinia striiformis f. sp. tritici, Pst pathogens prevalent in China, including V26/Gui 22. These new hexaploid triticales not only enhanced diversification of triticale but also could be utilized as valuable germplasm for wheat improvement.

  15. Particle size analyses of porous silica and hybrid silica chromatographic support particles. Comparison of flow/hyperlayer field-flow fractionation with scanning electron microscopy, electrical sensing zone, and static light scattering.

    Science.gov (United States)

    Xu, Yuehong

    2008-05-16

    Porous silica and hybrid silica chromatographic support particles having particle diameters ranging approximately from 1 microm to 15 microm have been characterized by flow/hyperlayer field-flow fractionation (FFF). The particle size accuracy has been improved significantly in this work by a second-order polynomial calibration. Very good agreement between the FFF data and scanning electron microscopic (SEM) results has been achieved. The effects of particle porosity, pore sizes, and particle sizes on the particle size accuracy in electrical sensing zone (ESZ) analyses have been discussed. It has been demonstrated by computer simulation and experimental measurements that false peaks can be generated in certain particle size regions when the static light scattering (SLS) technique is applied to tightly distributed spherical chromatographic support particles.

  16. Effect of additional electron acceptor in hybrid P3HT:PCBM:ZnO spin-coated films for photovoltaic application

    CSIR Research Space (South Africa)

    Muller, T

    2016-04-01

    Full Text Available methyl ester (PCBM) blend, and used as additional acceptors of electrons in the active layer. Metal–oxide interface layers between the active layer and ITO and the top contact layer, respectively, were introduced in the solar cell to compensate...

  17. Catalytically-relevant electron transfer between two hemes bL in the hybrid cytochrome bc1-like complex containing a fusion of Rhodobacter sphaeroides and capsulatus cytochromes b.

    Science.gov (United States)

    Czapla, Monika; Cieluch, Ewelina; Borek, Arkadiusz; Sarewicz, Marcin; Osyczka, Artur

    2013-06-01

    To address mechanistic questions about the functioning of dimeric cytochrome bc1 new genetic approaches have recently been developed. They were specifically designed to enable construction of asymmetrically-mutated variants suitable for functional studies. One approach exploited a fusion of two cytochromes b that replaced the separate subunits in the dimer. The fusion protein, built from two copies of the same cytochrome b of purple bacterium Rhodobacter capsulatus, served as a template to create a series of asymmetrically-mutated cytochrome bc1-like complexes (B-B) which, through kinetic studies, disclosed several important principles of dimer engineering. Here, we report on construction of another fusion protein complex that adds a new tool to investigate dimeric function of the enzyme through the asymmetrically mutated forms of the protein. This complex (BS-B) contains a hybrid protein that combines two different cytochromes b: one coming from R. capsulatus and the other - from a closely related species, R. sphaeroides. With this new fusion we addressed a still controversial issue of electron transfer between the two hemes bL in the core of dimer. Kinetic data obtained with a series of BS-B variants provided new evidence confirming the previously reported observations that electron transfer between those two hemes occurs on a millisecond timescale, thus is a catalytically-relevant event. Both types of the fusion complexes (B-B and BS-B) consistently implicate that the heme-bL-bL bridge forms an electronic connection available for inter-monomer electron transfer in cytochrome bc1. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Electronic, magnetic and optical properties of reduced hybrid layered complex Ni(pyz)V4O10 (pyz=C4H4N2) by first-principles

    Science.gov (United States)

    Munir, Junaid; Mat Isa, Ahmad Radzi; Yousaf, Masood; Aliabad, H. A. Rahnamaye; Ain, Qurat-ul; Saeed, M. A.

    2016-10-01

    This article reports the electronic, structure, magnetic and optical properties of reduced hybrid layered complex Ni(pyz)V4O10 (pyz=C4H4N2) studied by employing density functional theory with local density approximation (LDA), generalized gradient approximation (GGA) of Perdew-Burke-Ernzerhof-96 (PBE) and modified Becke-Johnson (mBJ) exchange-correlation potential and energy. The band structure and density of states of these compounds are also presented. The total density of states (DOS) for up and down spin states clearly split, which means that the exchange interaction causes the ordered spin arrangement. PBE-mBJ calculation reveals a wider band gap in spin down state, which shows a half-metallic electronic character at the equilibrium state. The spin-polarized calculations indicate metallic nature in orthorhombic crystalline phase. It is also noted that the optical conductivity for PBE-mBJ is larger than that of LDA and PBE-GGA. Furthermore, the results show a half-metallic ferromagnetic ground state for Ni(pyz)V4O10 in PBE-mBJ potential. The present results suggest Ni(pyz)V4O10 compound as a potential candidate for the future optoelectronic and spintronic applications.

  19. P-Fluorous Phosphines as Electron-Poor/Fluorous Hybrid Functional Ligands for Precious Metal Catalysts: Synthesis of Rh(I, Ir(I, Pt(II, and Au(I Complexes Bearing P-Fluorous Phosphine Ligands

    Directory of Open Access Journals (Sweden)

    Shin-ichi Kawaguchi

    2017-01-01

    Full Text Available P-Fluorous phosphine (R2PRf, in which the perfluoroalkyl group is directly bonded to the phosphorus atom, is a promising ligand because it has a hybrid functionality, i.e., electron-poor and fluorous ligands. However, examples of P-fluorous phosphine–metal complexes are still rare, most probably because the P-fluorous group is believed to decrease the coordination ability of the phosphines dramatically. In contrast, however, we have succeeded in synthesizing a series of P-fluorous phosphine–coordinated metal complexes such as rhodium, iridium, platinum, and gold. Furthermore, the electronic properties of R2PnC10F21 are investigated by X-ray analysis of PtCl2(Ph2PnC10F212 and the infrared CO stretching frequency of RhCl(CO(R2PnC10F212. IrCl(CO(Ph2PnC10F212- and AuCl(R2PnC10F21-catalyzed reactions are also demonstrated.

  20. The Electronic Structures and Optical Properties of Alkaline-Earth Metals Doped Anatase TiO2: A Comparative Study of Screened Hybrid Functional and Generalized Gradient Approximation

    Directory of Open Access Journals (Sweden)

    Jin-Gang Ma

    2015-08-01

    Full Text Available Alkaline-earth metallic dopant can improve the performance of anatase TiO2 in photocatalysis and solar cells. Aiming to understand doping mechanisms, the dopant formation energies, electronic structures, and optical properties for Be, Mg, Ca, Sr, and Ba doped anatase TiO2 are investigated by using density functional theory calculations with the HSE06 and PBE functionals. By combining our results with those of previous studies, the HSE06 functional provides a better description of electronic structures. The calculated formation energies indicate that the substitution of a lattice Ti with an AEM atom is energetically favorable under O-rich growth conditions. The electronic structures suggest that, AEM dopants shift the valence bands (VBs to higher energy, and the dopant-state energies for the cases of Ca, Sr, and Ba are quite higher than Fermi levels, while the Be and Mg dopants result into the spin polarized gap states near the top of VBs. The components of VBs and dopant-states support that the AEM dopants are active in inter-band transitions with lower energy excitations. As to optical properties, Ca/Sr/Ba are more effective than Be/Mg to enhance absorbance in visible region, but the Be/Mg are superior to Ca/Sr/Ba for the absorbance improvement in near-IR region.

  1. Tuning near-gap electronic structure, interface charge transfer and visible light response of hybrid doped graphene and Ag3PO4 composite: Dopant effects

    CERN Document Server

    He, Chao-Ni; Xu, Liang; Yang, Yin-Cai; Zhou, Bing-Xin; Huang, Gui-Fang; Peng, P; Liu, Wu-Ming

    2015-01-01

    The enhanced photocatalytic performance of doped graphene(GR)/semiconductor nanocomposites have recently been widely observed, but an understanding of the underlying mechanisms behind it is still out of reach. As a model system to study the effect of dopants, we investigate the electronic structures and optical properites of doped GR/Ag3PO4 nanocomposites using the first-principles calculations, demonstrating that the band gap, near-gap electronic structure and interface charge transfer of the doped GR/Ag3PO4(100) composite can be tuned by the dopants. Interestingly, the doping atom and C atoms bonded to dopant become active sites for photocatalysis because they are positively or negatively charged due to the charge redistribution caused by interaction. The dopants can enhance the visible light absorption and photoinduced electrons transfer. We propose that the N atom may be most appropriate doping for the GR/Ag3PO4 photocatalyst. This work can rationalize the available experimental results about N-doped GR-s...

  2. CERN manufactured hybrid photon detectors

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    These hybrid photon detectors (HPDs) produce an electric signal from a single photon. An electron is liberated from a photocathode and accelerated to a silicon pixel array allowing the location of the photon on the cathode to be recorded. The electronics and optics for these devices have been developed in close collaboration with industry. HPDs have potential for further use in astrophysics and medical imaging.

  3. Amorphous Carbon-Boron Nitride Nanotube Hybrids

    Science.gov (United States)

    Kim, Jae Woo (Inventor); Siochi, Emilie J. (Inventor); Wise, Kristopher E. (Inventor); Lin, Yi (Inventor); Connell, John (Inventor)

    2016-01-01

    A method for joining or repairing boron nitride nanotubes (BNNTs). In joining BNNTs, the nanotube structure is modified with amorphous carbon deposited by controlled electron beam irradiation to form well bonded hybrid a-C/BNNT structures. In repairing BNNTs, the damaged site of the nanotube structure is modified with amorphous carbon deposited by controlled electron beam irradiation to form well bonded hybrid a-C/BNNT structures at the damage site.

  4. Optical Orientation in Ferromagnet/Semiconductor Hybrids

    OpenAIRE

    Korenev, V. L.

    2008-01-01

    The physics of optical pumping of semiconductor electrons in the ferromagnet/semiconductor hybrids is discussed. Optically oriented semiconductor electrons detect the magnetic state of the ferromagnetic film. In turn, the ferromagnetism of the hybrid can be controlled optically with the help of the semiconductor. Spin-spin interactions near the interface ferromagnet/semiconductor play crucial role in the optical readout and the manipulation of ferromagnetism.

  5. A hybrid electron cyclotron resonance metal ion source with integrated sputter magnetron for the production of an intense Al{sup +} ion beam

    Energy Technology Data Exchange (ETDEWEB)

    Weichsel, T., E-mail: tim.weichsel@fep.fraunhofer.de; Hartung, U.; Kopte, T. [Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP, 01277 Dresden (Germany); Zschornack, G. [Institute of Solid State Physics, Dresden University of Technology, 01062 Dresden, Germany and Helmholtz-Zentrum Dresden-Rossendorf e.V., Institute of Ion Beam Physics and Materials Research, Dresden (Germany); Kreller, M.; Philipp, A. [DREEBIT GmbH, 01900 Grossroehrsdorf (Germany)

    2015-09-15

    A metal ion source prototype has been developed: a combination of magnetron sputter technology with 2.45 GHz electron cyclotron resonance (ECR) ion source technology—a so called magnetron ECR ion source (MECRIS). An integrated ring-shaped sputter magnetron with an Al target is acting as a powerful metal atom supply in order to produce an intense current of singly charged metal ions. Preliminary experiments show that an Al{sup +} ion current with a density of 167 μA/cm{sup 2} is extracted from the source at an acceleration voltage of 27 kV. Spatially resolved double Langmuir probe measurements and optical emission spectroscopy were used to study the plasma states of the ion source: sputter magnetron, ECR, and MECRIS plasma. Electron density and temperature as well as Al atom density were determined as a function of microwave and sputter magnetron power. The effect of ECR heating is strongly pronounced in the center of the source. There the electron density is increased by one order of magnitude from 6 × 10{sup 9} cm{sup −3} to 6 × 10{sup 10} cm{sup −3} and the electron temperature is enhanced from about 5 eV to 12 eV, when the ECR plasma is ignited to the magnetron plasma. Operating the magnetron at constant power, it was observed that its discharge current is raised from 1.8 A to 4.8 A, when the ECR discharge was superimposed with a microwave power of 2 kW. At the same time, the discharge voltage decreased from about 560 V to 210 V, clearly indicating a higher plasma density of the MECRIS mode. The optical emission spectrum of the MECRIS plasma is dominated by lines of excited Al atoms and shows a significant contribution of lines arising from singly ionized Al. Plasma emission photography with a CCD camera was used to prove probe measurements and to identify separated plasma emission zones originating from the ECR and magnetron discharge.

  6. Origin of new Brassica types from a single intergeneric hybrid between B. rapa and Orychophragmus violaceus by rapid chromosome evolution and introgression

    Indian Academy of Sciences (India)

    Chuan-Yuan Xu; Rui-Hongwan-Yan; Zai-Yun Li

    2007-12-01

    Many novel lines were established from an intergeneric mixoploid between Brassica rapa ($2n = 20$) and Orychophragmus violaceus ($2n = 24$) through successive selections for fertility and viability. Pedigrees of individual F2 plants were advanced to the 10th generation by selfing. Their breeding habit was self-compatible and different from the self-incompatibility of their female parent B. rapa, and these lines were reproductively isolated to different degrees from B. rapa and B. napus. The lines with high productivity showed not only a wide spectrum of phenotypes but also obvious variations in fatty acid profiles of seed oil and glucosinolate contents in seed meal. These lines had $2n = 36$, 37, 38, 39 and 40, with $2n = 38$ being most frequent (64.56%), and no intact O. violaceus chromosomes were detected by genomic in situ hybridization (GISH) analysis. Amplified fragment length polymorphism (AFLP) analyses revealed a high extent of variation in genomic compositions across all the lines. O. violaceus-specific bands, deleted bands in B. rapa and novel bands for two parents were detected in these lines, with novel bands being the most frequent. The morphological and genetic divergence of these novel types derived from a single hybrid is probably due to rapid chromosomal evolution and introgression, and provides new genetic resources for rapeseed breeding.

  7. Screened coulomb hybrid DFT study on electronic structure and optical properties of anionic and cationic Te-doped anatase TiO2

    KAUST Repository

    Harb, Moussab

    2013-06-27

    The origin of the enhanced visible-light optical absorption in Te-doped bulk anatase TiO2 is investigated in the framework of DFT and DFPT within HSE06 in order to ensure accurate electronic structure and optical transition predictions. Various oxidation states of Te species are considered based on their structural location in bulk TiO2. In fact, TiO (2-x)Tex (with isolated Te2- species at Te-Te distance of 8.28 Å), TiO2Tex (with isolated TeO 2- species at Te-Te distance of 8.28 Å), TiO2Te 2x (with two concomitant TeO2- species at Te-Te distance of 4.11 Å), and Ti(1-2x)O2Te2x (with two neighboring Te4+ species at nearest-neighbor Te-Te distance of 3.05 Å) show improved optical absorption responses in the visible range similarly as it is experimentally observed in Te-doped TiO2 powders. The optical absorption edges of TiO(2-x)Tex, TiO 2Tex, and TiO2Te2x are found to be red-shifted by 400 nm compared with undoped TiO2 whereas that of Ti(1-2x)O2Te2x is red-shifted by 150 nm. On the basis of calculated valence and conduction band edge positions of Te-doped TiO2, only TiO(2-x)Tex and Ti (1-2x)O2Te2x show suitable potentials for overall water splitting under visible-light irradiation. The electronic structure analysis revealed narrower band gaps of 1.12 and 1.17 eV with respect to undoped TiO2, respectively, resulting from the appearance of new occupied electronic states in the gap of TiO2. A delocalized nature of the gap states is found to be much more pronounced in TiO (2-x)Tex than that with Ti(1-2x)O 2Te2x due to the important contribution of numerous O 2p orbitals together with Te 5p orbitals. © 2013 American Chemical Society.

  8. Hybrid microelectronic technology

    Science.gov (United States)

    Moran, P.

    Various areas of hybrid microelectronic technology are discussed. The topics addressed include: basic thick film processing, thick film pastes and substrates, add-on components and attachment methods, thin film processing, and design of thick film hybrid circuits. Also considered are: packaging hybrid circuits, automating the production of hybrid circuits, application of hybrid techniques, customer's view of hybrid technology, and quality control and assurance in hybrid circuit production.

  9. Hybridization and suppression of the superconductivity in CeFeAsO1-y. Pressure and temperature dependences of the electronic structure

    Energy Technology Data Exchange (ETDEWEB)

    Yamaoka, Hitoshi [Inst. of Physical and Chemical Research (RIKEN), Wako (Japan); Jarrige, Ignace [Japan Atomic Energy Agency (JAEA), Hyogo (Japan); Ikeda-Ohno, Atsushi [Japan Atomic Energy Agency (JAEA), Hyogo (Japan); Tsutsui, Satoshi [Japan Synchrotron Radiation Research Inst., Hyogo (Japan); Lin, Jung-Fu [Univ. of Texas, Austin, TX (United States); Takeshita, Nao [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Miyazawa, Kiichi [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Tokyo Univ. of Science, Chiba (Japan); Iyo, Akira [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Tokyo Univ. of Science, Chiba (Japan); Kito, Hijiri [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Eisaki, Hiroshi [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Hiraoka, Nozomu [National Synchrotron Radiation Research Center, Hsinchu (Taiwan); Ishii, Hirofumi [National Synchrotron Radiation Research Center, Hsinchu (Taiwan); Tsuei, Ku-Ding [National Synchrotron Radiation Research Center, Hsinchu (Taiwan)

    2010-09-23

    Pressure and temperature dependence of the electronic structure of superconducting (SC) CeFeAsO1-y and non-SC CeFeAsO1-y have been investigated using two complementary hard x-ray spectroscopic probes at the Ce L3 edge, partial fluorescence yield x-ray absorption spectroscopy and resonant x-ray emission spectroscopy. With increasing pressure, the ratio between the intensity of the peak related to the f0 (Ce4+ ) state and that of the f1 (Ce3+ ) state, I(f0)/I(f1 ), is found to increase continuously for both compounds, indicating a continuous increase in the Ce valence. The valence of non-SC CeFeAsO1-y is found to be slightly higher than that of SC CeFeAsO1-y in the entire pressure and temperature ranges of this study. The valence of CeFeAsO1-y around 6 GPa, where the superconductivity breaks down, is estimated to be ~3.0 , but no change in the valence is observed upon cooling. The dependence of the interatomic distances on the concentration of oxygen vacancies is studied via extended absorption fine structure spectroscopy.

  10. Study on the Hybrid Redundant Regional Electronic Medical Record Data Center Model%混合冗余式区域电子病历数据中心模型研究

    Institute of Scientific and Technical Information of China (English)

    朱远燕; 高春蓉

    2016-01-01

    The regional electronic medical record data center is the data resource and information base which can realize the medical business synergy function in the region. It will promote openness and sharing of medical information, and alleviate the imbalance of health resources, high medical costs and other problems. This paper mainly introduces the architecture of hybrid redundant data center model and its application implementation in the specific project.%区域电子病历数据中心是实现区域内医疗业务协同功能的数据资源和信息基础,将推动医疗信息的开放与共享,缓解医疗资源的不平衡、医疗成本高等问题。主要阐述混合冗余式数据中心模型架构及其在具体项目中的应用实现。

  11. Hybrid Gear

    Science.gov (United States)

    Handschuh, Robert F. (Inventor); Roberts, Gary D. (Inventor)

    2016-01-01

    A hybrid gear consisting of metallic outer rim with gear teeth and metallic hub in combination with a composite lay up between the shaft interface (hub) and gear tooth rim is described. The composite lay-up lightens the gear member while having similar torque carrying capability and it attenuates the impact loading driven noise/vibration that is typical in gear systems. The gear has the same operational capability with respect to shaft speed, torque, and temperature as an all-metallic gear as used in aerospace gear design.

  12. Hybrid Qualifications

    DEFF Research Database (Denmark)

    has turned out as a major focus of European education and training policies and certainly is a crucial principle underlying the European Qualifications Framework (EQF). In this context, «hybrid qualifications» (HQ) may be seen as an interesting approach to tackle these challenges as they serve «two...... masters», i.e. by producing skills for the labour market and enabling individuals to progress more or less directly to higher education. The specific focus of this book is placed on conditions, structures and processes which help to combine VET with qualifications leading into higher education...

  13. (EDT-TTF-CONH2)6[Re6Se8(CN)6], a metallic Kagome-type organic-inorganic hybrid compound: electronic instability, molecular motion, and charge localization.

    Science.gov (United States)

    Baudron, Stéphane A; Batail, Patrick; Coulon, Claude; Clérac, Rodolphe; Canadell, Enric; Laukhin, Vladimir; Melzi, Roberto; Wzietek, Pawel; Jérome, Denis; Auban-Senzier, Pascale; Ravy, Sylvain

    2005-08-24

    (EDT-TTF-CONH2)6[Re6Se8(CN)6], space group R, was prepared by electrocrystallization from the primary amide-functionalized ethylenedithiotetrathiafulvalene, EDT-TTF-CONH2 (E(1/2)1 = 0.49 V vs SCE in CH3CN), and the molecular cluster tetraanion, [Re6Se8(CN)6]4- (E(1/2) = 0.33 V vs SCE in CH3CN), equipped with hydrogen bond donor and hydrogen bond acceptor functionalities, respectively. Its Kagome topology is unprecedented for any TTF-based materials. The metallic state observed at room temperature has a strong two-dimensional character, in coherence with the Kagome lattice symmetry, and the presence of minute amounts of [Re6Se8(CN)6](3-)* identified by electron spin spectroscopy. A structural instability toward a distorted form of the Kagome topology of lesser symmetry is observed at ca. 180 K. The low-temperature structure is associated with a localized, electrically insulating electronic ground state and its magnetic susceptibility accounted for by a model of uniform chains of localized S = 1/2 spins in agreement with the 100 K triclinic crystal structure and band structure calculations. A sliding motion, within one out of the three (EDT-TTF-CONH2)2 dimers coupled to the [Re6Se8(CN6)(3-)*]/[Re6Se8(CN6)4-] proportion at any temperature, and the electronic ground state of the organic-inorganic hybrid material are analyzed on the basis of ESR, dc conductivity, 1H spin-lattice relaxation, and static susceptibility data which qualify a Mott localization in [EDT-TTF-CONH2]6[Re6Se8(CN)6]. The coupling between the metal-insulator transition and a structural transition allows for the lifting of a degeneracy due to the ternary axis in the high temperature, strongly correlated metallic phase which, in turn, leads to Heisenberg chains at low temperature.

  14. Electronic structure, optical properties and the mechanism of the B3-B8 phase transition of BeSe: insights from hybrid functionals, lattice dynamics and NPH molecular dynamics.

    Science.gov (United States)

    Dutta, Rajkrishna; Alptekin, Sebahaddin; Mandal, Nibir

    2013-03-27

    We have investigated the electronic structure and the mechanism of the pressure induced phase transition of beryllium selenide (BeSe) by employing a first-principles pseudopotential method within the framework of density functional theory. Our study demonstrates that use of the hybrid PBE0 functional (PBE stands for Perdew, Burke and Ernzerhof) leads to significant improvement in the band gap calculations, compared to those using either of the common density functionals (local density approximation (LDA) and generalized gradient approximation (GGA)), which severely underestimate the band gap of BeSe. The band gap obtained from the hybrid PBE0 functional shows excellent agreement with available experimental data. A constant-pressure (NPH) first-principles molecular dynamics (FPMD) approach has been adopted to characterize the first-order pressure induced phase transition from the zinc blende (ZB) to the nickel arsenide (NiAs) structure. We have shown that the FPMD simulation overestimates the transition pressure P(T) (compared to static enthalpy and experimental data) due to overpressure in the simulation box. The MD simulation reveals the structural pathway (cubic → orthorhombic → monoclinic → hexagonal), leading from the ZB phase to the NiAs phase. To find an explanation for the phase transition we calculated the vibrational and elastic properties under pressure. Negative Grüneisen parameters were obtained for the transverse acoustic phonon modes at the X and L high symmetry points. However, no mechanical instability or imaginary frequencies were found at pressures near P(T). Thus the transition results from a thermodynamic instability rather than an elastic/dynamical one. We have also calculated the optical properties of both the B3 and B8 phases, such as the real and imaginary parts of the dielectric constant, reflectivity, loss function and refractive index, and compared them with the existing experimental and theoretical data. An abrupt decrease is

  15. A multiconfigurational hybrid density-functional theory

    DEFF Research Database (Denmark)

    Sharkas, Kamal; Savin, Andreas; Jensen, Hans Jørgen Aagaard

    2012-01-01

    We propose a multiconfigurational hybrid density-functional theory which rigorously combines a multiconfiguration self-consistent-field calculation with a density-functional approximation based on a linear decomposition of the electron-electron interaction. This gives a straightforward extension ...

  16. A multiconfigurational hybrid density-functional theory

    DEFF Research Database (Denmark)

    Sharkas, Kamal; Savin, Andreas; Jensen, Hans Jørgen Aagaard

    2012-01-01

    We propose a multiconfigurational hybrid density-functional theory which rigorously combines a multiconfiguration self-consistent-field calculation with a density-functional approximation based on a linear decomposition of the electron-electron interaction. This gives a straightforward extension ...

  17. Intuitionistic hybrid logic

    DEFF Research Database (Denmark)

    Braüner, Torben

    2011-01-01

    Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area.......Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area....

  18. Continuity Controlled Hybrid Automata

    OpenAIRE

    Bergstra, J. A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of hybrid automata as timed transition systems. We also relate the synchronized product operator on hybrid automata to the parallel composition operator of the process algebra. It turns out that the f...

  19. FISHy Analysis of Tetrapioid Cotton Species

    Institute of Scientific and Technical Information of China (English)

    SONG Guo-li; WANG Kun-bo; PENG Ren-hai; WU Qiong; LING Jian; LIU Fang; STELLY David

    2008-01-01

    @@ Fluorescent in situ hybridization (FISH) is an important technique in plant genome research,because it provides integrated information about DNA,chromosomes and genomes.Genomic in situ hybridization (GISH) is a modification of FISH that can be used to rapidly compare genorne content,relatedness,organization and/or behavior.GISH results often provide insight into genome evolution and species relationships.

  20. Hybridized tetraquarks

    Directory of Open Access Journals (Sweden)

    A. Esposito

    2016-07-01

    Full Text Available We propose a new interpretation of the neutral and charged X,Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules but rather a manifestation of the interplay between the two. While meson molecules need a negative or zero binding energy, its counterpart for h-tetraquarks is required to be positive. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs0π± channel by the D0 Collaboration and the negative result presented subsequently by the LHCb Collaboration are understood in this scheme, together with a considerable portion of available data on X,Z particles. Considerations on a state with the same quantum numbers as the X(5568 are also made.

  1. Hybridized Tetraquarks

    CERN Document Server

    Esposito, A.; Polosa, A.D.

    2016-01-01

    We propose a new interpretation of the neutral and charged X, Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules. The latter would require a negative or zero binding energy whose counterpart in h-tetraquarks is a positive quantity. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs pi+- channel by the D0 collaboration and the negative result presented subsequently by the LHCb collaboration are understood in this scheme, together with a considerable portion of available data on X, Z particles. Considerations on a state with the same quantum numbers as the X(5568) are also made.

  2. A multiconfigurational hybrid density-functional theory

    CERN Document Server

    Sharkas, Kamal; Jensen, Hans Jørgen Aa; Toulouse, Julien; 10.1063/1.4733672

    2012-01-01

    We propose a multiconfigurational hybrid density-functional theory which rigorously combines a multiconfiguration self-consistent-field calculation with a density-functional approximation based on a linear decomposition of the electron-electron interaction. This gives a straightforward extension of the usual hybrid approximations by essentially adding a fraction \\lambda of exact static correlation in addition to the fraction \\lambda of exact exchange. Test calculations on the cycloaddition reactions of ozone with ethylene or acetylene and the dissociation of diatomic molecules with the Perdew-Burke-Ernzerhof (PBE) and Becke-Lee-Yang-Parr (BLYP) density functionals show that a good value of \\lambda is 0.25, as in the usual hybrid approximations. The results suggest that the proposed multiconfigurational hybrid approximations can improve over usual density-functional calculations for situations with strong static correlation effects.

  3. Fe-Cluster Pushing Electrons to N-Doped Graphitic Layers with Fe3C(Fe) Hybrid Nanostructure to Enhance O2 Reduction Catalysis of Zn-Air Batteries.

    Science.gov (United States)

    Yang, Jie; Hu, Jiangtao; Weng, Mouyi; Tan, Rui; Tian, Leilei; Yang, Jinlong; Amine, Joseph; Zheng, Jiaxin; Chen, Haibiao; Pan, Feng

    2017-02-08

    Non-noble metal catalysts with catalytic activity toward oxygen reduction reaction (ORR) comparable or even superior to that of Pt/C are extremely important for the wide application of metal-air batteries and fuel cells. Here, we develop a simple and controllable strategy to synthesize Fe-cluster embedded in Fe3C nanoparticles (designated as Fe3C(Fe)) encased in nitrogen-doped graphitic layers (NDGLs) with graphitic shells as a novel hybrid nanostructure as an effective ORR catalyst by directly pyrolyzing a mixture of Prussian blue (PB) and glucose. The pyrolysis temperature was found to be the key parameter for obtaining a stable Fe3C(Fe)@NDGL core-shell nanostructure with an optimized content of nitrogen. The optimized Fe3C(Fe)@NDGL catalyst showed high catalytic performance of ORR comparable to that of the Pt/C (20 wt %) catalyst and better stability than that of the Pt/C catalyst in alkaline electrolyte. According to the experimental results and first principle calculation, the high activity of the Fe3C(Fe)@NDGL catalyst can be ascribed to the synergistic effect of an adequate content of nitrogen doping in graphitic carbon shells and Fe-cluster pushing electrons to NDGL. A zinc-air battery utilizing the Fe3C(Fe)@NDGL catalyst demonstrated a maximum power density of 186 mW cm(-2), which is slightly higher than that of a zinc-air battery utilizing the commercial Pt/C catalyst (167 mW cm(-2)), mostly because of the large surface area of the N-doped graphitic carbon shells. Theoretical calculation verified that O2 molecules can spontaneously adsorb on both pristine and nitrogen doped graphene surfaces and then quickly diffuse to the catalytically active nitrogen sites. Our catalyst can potentially become a promising replacement for Pt catalysts in metal-air batteries and fuel cells.

  4. Hybrid p olymer-based solar cells with metal oxides as the main electron acceptor and transp orter%金属氧化物基杂化型聚合物太阳电池研究∗

    Institute of Scientific and Technical Information of China (English)

    刘长文; 周讯; 岳文瑾; 王命泰; 邱泽亮; 孟维利; 陈俊伟; 齐娟娟; 董超

    2015-01-01

    以有机共轭聚合物为电子给体和无机纳米结构为电子受体组成的杂化型聚合物太阳电池(HPSC),是一类新型的光伏器件。 HPSC将有机物和无机物的光学、电学和力学等性能集成在一起,其最显著的优点体现在材料来源丰富、性能互补且可调控、易实现低成本组装及轻便等方面。金属氧化物纳米结构具有环境友好、可见光区透明且易合成等特点,是很有发展前景的电子受体材料。本文首先简要介绍了HPSC电池的研究现状、工作原理、器件结构、和稳态及动态表征方法,然后重点综述了在基于ZnO和TiO2纳米结构的HPSC方面的研究进展,包括载流子传输动力学理论模型、高效电池材料与器件的设计和制备、及纳米结构特性相关的器件性能等。最后,对我们的研究成果进行了总结,并展望了电池的后续研究方向和发展前景。%Hybrid polymer-based solar cells (HPSCs) that use conjugate polymers as electron donor (D) and inorganic semiconductor nanocrystals as electron acceptor (A) are novel photovoltaic devices. HPSCs integrate the properties of organic polymer (flexibility, ease of film formation, high absorption coefficient) and inorganic nanostructures (high electron mobility, high electron affinity, and good stability), and have the extra advantages, such as the rich sources of synthesized nanostructures by wet chemistry, tunable and complementary properties of assembled components, solution-processibility on a large scale at low cost and light-weight, etc. Amongst various inorganic semiconductor materials, the nanostructured metal oxides are the promising electron acceptors for HPSCs, because they are environment-friendly, transparent in visible spectrum and easy to be synthesized. After a brief introduction to the current research status, working principles, device architecture, steady-state and dynamic characterizations of HPSCs, this paper mainly

  5. Boltzmann Transport in Hybrid PIC HET Modeling

    Science.gov (United States)

    2015-07-01

    Paper 3. DATES COVERED (From - To) July 2015-July 2015 4. TITLE AND SUBTITLE Boltzmann transport in hybrid PIC HET modeling 5a. CONTRACT NUMBER In...produced a variety of self-consistent electron swarm codes, such as the Magboltz code, focused on directly solving the steady Boltzmann trans-port...Std. 239.18 Boltzmann transport in hybrid PIC HET modeling IEPC-2015- /ISTS-2015-b- Presented at Joint Conference of 30th International

  6. Continuity Controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  7. Continuity controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2008-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  8. Validation of columnar CsI x-ray detector responses obtained with hybridMANTIS, a CPU-GPU Monte Carlo code for coupled x-ray, electron, and optical transport.

    Science.gov (United States)

    Sharma, Diksha; Badano, Aldo

    2013-03-01

    hybridMANTIS is a Monte Carlo package for modeling indirect x-ray imagers using columnar geometry based on a hybrid concept that maximizes the utilization of available CPU and graphics processing unit processors in a workstation. The authors compare hybridMANTIS x-ray response simulations to previously published MANTIS and experimental data for four cesium iodide scintillator screens. These screens have a variety of reflective and absorptive surfaces with different thicknesses. The authors analyze hybridMANTIS results in terms of modulation transfer function and calculate the root mean square difference and Swank factors from simulated and experimental results. The comparison suggests that hybridMANTIS better matches the experimental data as compared to MANTIS, especially at high spatial frequencies and for the thicker screens. hybridMANTIS simulations are much faster than MANTIS with speed-ups up to 5260. hybridMANTIS is a useful tool for improved description and optimization of image acquisition stages in medical imaging systems and for modeling the forward problem in iterative reconstruction algorithms.

  9. Electronic detectors for electron microscopy.

    Science.gov (United States)

    Faruqi, A R; McMullan, G

    2011-08-01

    Electron microscopy (EM) is an important tool for high-resolution structure determination in applications ranging from condensed matter to biology. Electronic detectors are now used in most applications in EM as they offer convenience and immediate feedback that is not possible with film or image plates. The earliest forms of electronic detector used routinely in transmission electron microscopy (TEM) were charge coupled devices (CCDs) and for many applications these remain perfectly adequate. There are however applications, such as the study of radiation-sensitive biological samples, where film is still used and improved detectors would be of great value. The emphasis in this review is therefore on detectors for use in such applications. Two of the most promising candidates for improved detection are: monolithic active pixel sensors (MAPS) and hybrid pixel detectors (of which Medipix2 was chosen for this study). From the studies described in this review, a back-thinned MAPS detector appears well suited to replace film in for the study of radiation-sensitive samples at 300 keV, while Medipix2 is suited to use at lower energies and especially in situations with very low count rates. The performance of a detector depends on the energy of electrons to be recorded, which in turn is dependent on the application it is being used for; results are described for a wide range of electron energies ranging from 40 to 300 keV. The basic properties of detectors are discussed in terms of their modulation transfer function (MTF) and detective quantum efficiency (DQE) as a function of spatial frequency.

  10. Enhancing UV-emissions through optical and electronic dual-function tuning of Ag nanoparticles hybridized with n-ZnO nanorods/p-GaN heterojunction light-emitting diodes

    Science.gov (United States)

    Yao, Yung-Chi; Yang, Zu-Po; Hwang, Jung-Min; Chuang, Yi-Lun; Lin, Chia-Ching; Haung, Jing-Yu; Chou, Chun-Yang; Sheu, Jinn-Kong; Tsai, Meng-Tsan; Lee, Ya-Ju

    2016-02-01

    near-band-edge (NBE) emission (ZnO, λ = 380 nm) of our hybridized structure is increased almost 1.5-2 times and can be further modified in a controlled manner by varying the surface morphology of the surrounding medium of the Ag NPs. The improved light-output power is mainly attributed to the LSP resonance between the NBE emission of ZnO NRs and LSPs in Ag NPs. We also observed different behaviors in the electroluminescence (EL) spectra as the injection current increases for the treatment and reference LEDs. This observation might be attributed to the modification of the energy band diagram for introducing Ag NPs at the interface between n-ZnO NRs and p-GaN. Our results pave the way for developing advanced nanostructured LED devices with high luminescence efficiency in the UV emission regime. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr08561f

  11. Vibrational and rotational transitions in low-energy electron-diatomic-molecule collisions. I - Close-coupling theory in the moving body-fixed frame. II - Hybrid theory and close-coupling theory: An /l subscript z-prime/-conserving close-coupling approximation

    Science.gov (United States)

    Choi, B. H.; Poe, R. T.

    1977-01-01

    A detailed vibrational-rotational (V-R) close-coupling formulation of electron-diatomic-molecule scattering is developed in which the target molecular axis is chosen to be the z-axis and the resulting coupled differential equation is solved in the moving body-fixed frame throughout the entire interaction region. The coupled differential equation and asymptotic boundary conditions in the body-fixed frame are given for each parity, and procedures are outlined for evaluating V-R transition cross sections on the basis of the body-fixed transition and reactance matrix elements. Conditions are discussed for obtaining identical results from the space-fixed and body-fixed formulations in the case where a finite truncated basis set is used. The hybrid theory of Chandra and Temkin (1976) is then reformulated, relevant expressions and formulas for the simultaneous V-R transitions of the hybrid theory are obtained in the same forms as those of the V-R close-coupling theory, and distorted-wave Born-approximation expressions for the cross sections of the hybrid theory are presented. A close-coupling approximation that conserves the internuclear axis component of the incident electronic angular momentum (l subscript z-prime) is derived from the V-R close-coupling formulation in the moving body-fixed frame.

  12. Electronic and Microelectronic Capabilities.

    Science.gov (United States)

    1982-07-01

    22 3.9 Aztec Products Custom Wet-Chemistry Line ........................................... 22 3.10 KotIrnorgen...Cofight Vertical Rotary Etcher............*....................................................... 22 11. Aztec Products Custom Wet-Chemistry Line...state of the art in thick film hybrid fabrication methods, microelectronic fabrication and assembly, PC board fabrication, and electronic board assembly

  13. p-i-n/n-i-p type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and the role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides.

    Science.gov (United States)

    Mali, Sawanta S; Hong, Chang Kook

    2016-05-19

    There has been fast recent progress in perovskite solar cells (PSCs) towards low cost photovoltaic technology. Organometal mixed halide (MAPbX or FAPbX) perovskites are the most promising light absorbing material sandwiched between the electron transport layer (ETL) and hole transport layer (HTL). These two layers play a critical role in boosting the power conversion efficiency (PCE) and maintaining air stability. However, the device stability is a serious issue in regular as well as p-i-n inverted type perovskite solar cells. This mini-review briefly outlines the state-of-art of p-i-n/n-i-p type planar hybrid perovskite solar cells using MAPbX/FAPbX perovskite absorbing layers. Later, we will focus on recent trends, progress and further opportunities in exploring the air stable hybrid planar structure PSCs.

  14. p-i-n/n-i-p type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and the role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides

    Science.gov (United States)

    Mali, Sawanta S.; Hong, Chang Kook

    2016-05-01

    There has been fast recent progress in perovskite solar cells (PSCs) towards low cost photovoltaic technology. Organometal mixed halide (MAPbX or FAPbX) perovskites are the most promising light absorbing material sandwiched between the electron transport layer (ETL) and hole transport layer (HTL). These two layers play a critical role in boosting the power conversion efficiency (PCE) and maintaining air stability. However, the device stability is a serious issue in regular as well as p-i-n inverted type perovskite solar cells. This mini-review briefly outlines the state-of-art of p-i-n/n-i-p type planar hybrid perovskite solar cells using MAPbX/FAPbX perovskite absorbing layers. Later, we will focus on recent trends, progress and further opportunities in exploring the air stable hybrid planar structure PSCs.

  15. Multifunctional hybrids for electromagnetic absorption

    Energy Technology Data Exchange (ETDEWEB)

    Huynen, I. [Research Center in Micro and Nanoscopic Materials and Electronic Devices, CeRMiN, Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Information and Communications Technologies, Electronics and Applied Mathematics (ICTEAM), Microwave Laboratory, Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Quievy, N. [Institute of Condensed Matter and Nanosciences (IMCN), Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Bailly, C. [Research Center in Micro and Nanoscopic Materials and Electronic Devices, CeRMiN, Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Institute of Condensed Matter and Nanosciences (IMCN), Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Institute of Mechanics, Materials and Civil Engineering (iMMC), Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Bollen, P. [Information and Communications Technologies, Electronics and Applied Mathematics (ICTEAM), Microwave Laboratory, Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Institute of Condensed Matter and Nanosciences (IMCN), Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Institute of Mechanics, Materials and Civil Engineering (iMMC), Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Detrembleur, C. [Center for Education and Research on Macromolecules (CERM), University of Liege, Sart-Tilman B6a, 4000 Liege (Belgium); Eggermont, S.; Molenberg, I. [Information and Communications Technologies, Electronics and Applied Mathematics (ICTEAM), Microwave Laboratory, Universite catholique de Louvain, B-1348 Louvain-la-Neuve (Belgium); Thomassin, J.M.; Urbanczyk, L. [Center for Education and Research on Macromolecules (CERM), University of Liege, Sart-Tilman B6a, 4000 Liege (Belgium)

    2011-05-15

    Highlights: > EM absorption requires low dielectric constant and {approx}1 S/m electrical conductivity. > New hybrids were processed with CNT-filled polymer foam inserted in Al honeycomb. > The EM absorption in the GHz range is superior to any known material. > A closed form model is used to guide the design of the hybrid. > The architectured material is light with potential for thermal management. - Abstract: Electromagnetic (EM) interferences are ubiquitous in modern technologies and impact on the reliability of electronic devices and on living cells. Shielding by EM absorption, which is preferable over reflection in certain instances, requires combining a low dielectric constant with high electrical conductivity, which are antagonist properties in the world of materials. A novel class of hybrid materials for EM absorption in the gigahertz range has been developed based on a hierarchical architecture involving a metallic honeycomb filled with a carbon nanotube-reinforced polymer foam. The waveguide characteristics of the honeycomb combined with the performance of the foam lead to unexpectedly large EM power absorption over a wide frequency range, superior to any known material. The peak absorption frequency can be tuned by varying the shape of the honeycomb unit cell. A closed form model of the EM reflection and absorption provides a tool for the optimization of the hybrid. This designed material sets the stage for a new class of sandwich panels combining high EM absorption with mass efficiency, stiffness and thermal management.

  16. Preparation and Characterization of Organic/Inorganic Hybrid Nanofibers

    Institute of Scientific and Technical Information of China (English)

    WU Ning; WEI Qu-fu; LI Qi; XU Wen-zheng

    2006-01-01

    A new class of nanocomposites based on organic and inorganic species integrated at a nanoscale has obtained more attention these years. Organic-inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance. In this work, PVAc/TiO2 organicinorganic hybrid was prepared by sol-gel process. Electrospinning technique was used to fabricate PVAc/TiO2hybrid nanofibers. The structures and properties of the hybrid nanofibers were characterized by Scanning Electron Microscopy (SEM), Atomic Force Microscope (AFM),Differential Scanning Calorimeter (DSC) and Fouriertransform infrared (FTIR) spectra. SEM and AFM were employed to study the topography of the hybrid nanofibers.The chemical structure of the hybrid nanofibers were examined by FTIR. The DSC scansrevealed the second order transition temperature of the hybrid materials were higher than PVAc.

  17. The rehybridization of electronic orbitals in carbon nanotubes

    Institute of Scientific and Technical Information of China (English)

    Ouyang Yu; Peng Jing-Cui; Wang Hui; Peng Zhi-Hua

    2008-01-01

    Rehybridization of electronic orbitals in carbon nanotubes contains tilting angles of π orbital, electrons wavefunc-tions of π orbital and σ orbital, degrees of hybridization, etc. In this paper, we have obtained analytical formulas of tilting angle of π orbital relative to tube surface, electrons wavefunctions of π orbital and σ orbital, degrees of hybridization, separately, as well as the numerical results.

  18. Electroactive functional hybrid layered nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Destri, Giovanni Li; Torrisi, Vanna; Marletta, Giovanni [Laboratory for Molecular Surfaces and Nanotechnology (LAMSUN) - University of Catania and CSGI - Catania (Italy)

    2012-07-11

    Two methodologies to build new nanostructured hybrid layered nanocomposites are presented. The first one involves the preparation of hybrid metal/polymer nanolayers (NLs) by combining two monolayer preparation techniques: Horizontal Precipitation Langmuir Blodgett method (HP-ML), for copolymer monolayers and sputter deposition technique, for Au NLs deposition. The second methodology is aimed to prepare regular arrays of nanopores, with diameter ranging between 40-100 nm, in ultra-thin films of electroactive polymers, to obtain embedded regular arrays of nanopores filled by a further electroactive organic component. The produced hybrid MLs have been characterized by means of X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and Grazing Incidence X-ray Diffraction (GI-XRD). In the first case, current-voltage (I-V) measurements demonstrate that the multilayers exhibit a bipolar conduction behaviour (electrons and holes carriers), with a peculiar transition in the nature of the majority carriers (from holes to electrons) above a threshold number of bilayers. In the second case, it is found that the degree of pore filling, as well as the polymer crystallinity can be easily modulated, prompting the tuning of the photoresponse of the nanocomposites.

  19. Particle acceleration in tangential discontinuities by lower hybrid waves

    Directory of Open Access Journals (Sweden)

    D. Spicer

    2002-01-01

    Full Text Available We consider the role that the lower-hybrid wave turbulence plays in providing the necessary resistivity at collisionless reconnection sights. The mechanism for generating the waves is considered to be the lower-hybrid drift instability. We find that the level of the wave amplitude is sufficient enough to heat and accelerate both electrons and ions.

  20. From hybrid swarms to swarms of hybrids

    Science.gov (United States)

    The introgression of modern humans (Homo sapiens) with Neanderthals 40,000 YBP after a half-million years of separation, may have led to the best example of a hybrid swarm on earth. Modern trade and transportation in support of the human hybrids has continued to introduce additional species, genotyp...

  1. The Hybrid Museum: Hybrid Economies of Meaning

    DEFF Research Database (Denmark)

    Vestergaard, Vitus

    2013-01-01

    this article shows that there are two different museum mindsets where the second mindset leans towards participatory practices. It is shown how a museum can support a hybrid economy of meaning that builds on both a user generated economy of meaning and an institutional economy of meaning and adds value to both....... Such a museum is referred to as a hybrid museum....

  2. Hydraulic Hybrid Vehicles

    Science.gov (United States)

    EPA and the United Parcel Service (UPS) have developed a hydraulic hybrid delivery vehicle to explore and demonstrate the environmental benefits of the hydraulic hybrid for urban pick-up and delivery fleets.

  3. Hybrid Management in Hospitals

    DEFF Research Database (Denmark)

    Byrkjeflot, Haldor; Jespersen, Peter Kragh

    2010-01-01

    Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer......Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer...

  4. Electronics and electronic systems

    CERN Document Server

    Olsen, George H

    1987-01-01

    Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

  5. Modeling hybrid perovskites by molecular dynamics.

    Science.gov (United States)

    Mattoni, Alessandro; Filippetti, Alessio; Caddeo, Claudia

    2017-02-01

    The topical review describes the recent progress in the modeling of hybrid perovskites by molecular dynamics simulations. Hybrid perovskites and in particular methylammonium lead halide (MAPI) have a tremendous technological relevance representing the fastest-advancing solar material to date. They also represent the paradigm of an organic-inorganic crystalline material with some conceptual peculiarities: an inorganic semiconductor for what concerns the electronic and absorption properties with a hybrid and solution processable organic-inorganic body. After briefly explaining the basic concepts of ab initio and classical molecular dynamics, the model potential recently developed for hybrid perovskites is described together with its physical motivation as a simple ionic model able to reproduce the main dynamical properties of the material. Advantages and limits of the two strategies (either ab initio or classical) are discussed in comparison with the time and length scales (from pico to microsecond scale) necessary to comprehensively study the relevant properties of hybrid perovskites from molecular reorientations to electrocaloric effects. The state-of-the-art of the molecular dynamics modeling of hybrid perovskites is reviewed by focusing on a selection of showcase applications of methylammonium lead halide: molecular cations disorder; temperature evolution of vibrations; thermally activated defects diffusion; thermal transport. We finally discuss the perspectives in the modeling of hybrid perovskites by molecular dynamics.

  6. Modeling hybrid perovskites by molecular dynamics

    Science.gov (United States)

    Mattoni, Alessandro; Filippetti, Alessio; Caddeo, Claudia

    2017-02-01

    The topical review describes the recent progress in the modeling of hybrid perovskites by molecular dynamics simulations. Hybrid perovskites and in particular methylammonium lead halide (MAPI) have a tremendous technological relevance representing the fastest-advancing solar material to date. They also represent the paradigm of an organic-inorganic crystalline material with some conceptual peculiarities: an inorganic semiconductor for what concerns the electronic and absorption properties with a hybrid and solution processable organic-inorganic body. After briefly explaining the basic concepts of ab initio and classical molecular dynamics, the model potential recently developed for hybrid perovskites is described together with its physical motivation as a simple ionic model able to reproduce the main dynamical properties of the material. Advantages and limits of the two strategies (either ab initio or classical) are discussed in comparison with the time and length scales (from pico to microsecond scale) necessary to comprehensively study the relevant properties of hybrid perovskites from molecular reorientations to electrocaloric effects. The state-of-the-art of the molecular dynamics modeling of hybrid perovskites is reviewed by focusing on a selection of showcase applications of methylammonium lead halide: molecular cations disorder; temperature evolution of vibrations; thermally activated defects diffusion; thermal transport. We finally discuss the perspectives in the modeling of hybrid perovskites by molecular dynamics.

  7. Resin Catalyst Hybrids

    Institute of Scientific and Technical Information of China (English)

    S. Asaoka

    2005-01-01

    @@ 1Introduction: What are resin catalyst hybrids? There are typically two types of resin catalyst. One is acidic resin which representative is polystyrene sulfonic acid. The other is basic resin which is availed as metal complex support. The objective items of this study on resin catalyst are consisting of pellet hybrid, equilibrium hybrid and function hybrid of acid and base,as shown in Fig. 1[1-5].

  8. Mesoscale hybrid calibration artifact

    Science.gov (United States)

    Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  9. Homoploid hybrid expectations

    Science.gov (United States)

    Homoploid hybrid speciation occurs when a stable, fertile, and reproductively isolated lineage results from hybridization between two distinct species without a change in ploidy level. Reproductive isolation between a homoploid hybrid species and its parents is generally attained via chromosomal re...

  10. Hybrid armature projectile

    Science.gov (United States)

    Hawke, Ronald S.; Asay, James R.; Hall, Clint A.; Konrad, Carl H.; Sauve, Gerald L.; Shahinpoor, Mohsen; Susoeff, Allan R.

    1993-01-01

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasama blowby.

  11. Intraply Hybrid Composite Design

    Science.gov (United States)

    Chamis, C. C.; Sinclair, J. H.

    1986-01-01

    Several theoretical approaches combined in program. Intraply hybrid composites investigated theoretically and experimentally at Lewis Research Center. Theories developed during investigations and corroborated by attendant experiments used to develop computer program identified as INHYD (Intraply Hybrid Composite Design). INHYD includes several composites micromechanics theories, intraply hybrid composite theories, and integrated hygrothermomechanical theory. Equations from theories used by program as appropriate for user's specific applications.

  12. Hybrid quantum information processing

    Energy Technology Data Exchange (ETDEWEB)

    Furusawa, Akira [Department of Applied Physics, School of Engineering, The University of Tokyo (Japan)

    2014-12-04

    I will briefly explain the definition and advantage of hybrid quantum information processing, which is hybridization of qubit and continuous-variable technologies. The final goal would be realization of universal gate sets both for qubit and continuous-variable quantum information processing with the hybrid technologies. For that purpose, qubit teleportation with a continuousvariable teleporter is one of the most important ingredients.

  13. Power Electronics for Microgrids

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Blaabjerg, Frede

    2016-01-01

    A microgrid (MG) is a stand-alone or grid-connected hybrid renewable system that uses distributed renewable and nonrenewable energy sources and energy storage systems (ESSs) to supply power to local loads. The system is ordinarily based on power electronics, with interface converters allowing...... a continuous supply of power in the presence of variable RES production. This chapter describes some specific features of DC MGs in terms of power architecture, control, and protection. It also reviews several uncommon power electronic interfaces. Regarding control, operation without critical communication...... are explained in this chapter. The chapter concludes with a review of power electronic intensive protection solutions for DC MGs....

  14. The hydrogen hybrid option

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.R.

    1993-10-15

    The energy efficiency of various piston engine options for series hybrid automobiles are compared with conventional, battery powered electric, and proton exchange membrane (PEM) fuel cell hybrid automobiles. Gasoline, compressed natural gas (CNG), and hydrogen are considered for these hybrids. The engine and fuel comparisons are done on a basis of equal vehicle weight, drag, and rolling resistance. The relative emissions of these various fueled vehicle options are also presented. It is concluded that a highly optimized, hydrogen fueled, piston engine, series electric hybrid automobile will have efficiency comparable to a similar fuel cell hybrid automobile and will have fewer total emissions than the battery powered vehicle, even without a catalyst.

  15. Hybridization and extinction.

    Science.gov (United States)

    Todesco, Marco; Pascual, Mariana A; Owens, Gregory L; Ostevik, Katherine L; Moyers, Brook T; Hübner, Sariel; Heredia, Sylvia M; Hahn, Min A; Caseys, Celine; Bock, Dan G; Rieseberg, Loren H

    2016-08-01

    Hybridization may drive rare taxa to extinction through genetic swamping, where the rare form is replaced by hybrids, or by demographic swamping, where population growth rates are reduced due to the wasteful production of maladaptive hybrids. Conversely, hybridization may rescue the viability of small, inbred populations. Understanding the factors that contribute to destructive versus constructive outcomes of hybridization is key to managing conservation concerns. Here, we survey the literature for studies of hybridization and extinction to identify the ecological, evolutionary, and genetic factors that critically affect extinction risk through hybridization. We find that while extinction risk is highly situation dependent, genetic swamping is much more frequent than demographic swamping. In addition, human involvement is associated with increased risk and high reproductive isolation with reduced risk. Although climate change is predicted to increase the risk of hybridization-induced extinction, we find little empirical support for this prediction. Similarly, theoretical and experimental studies imply that genetic rescue through hybridization may be equally or more probable than demographic swamping, but our literature survey failed to support this claim. We conclude that halting the introduction of hybridization-prone exotics and restoring mature and diverse habitats that are resistant to hybrid establishment should be management priorities.

  16. Spoof Plasmon Hybridization

    CERN Document Server

    Zhang, Jingjing; Luo, Yu; Shen, Xiaopeng; Maier, Stefan A; Cui, Tie Jun

    2016-01-01

    Plasmon hybridization between closely spaced nanoparticles yields new hybrid modes not found in individual constituents, allowing for the engineering of resonance properties and field enhancement capabilities of metallic nanostructure. Experimental verifications of plasmon hybridization have been thus far mostly limited to optical frequencies, as metals cannot support surface plasmons at longer wavelengths. Here, we introduce the concept of 'spoof plasmon hybridization' in highly conductive metal structures and investigate experimentally the interaction of localized surface plasmon resonances (LSPR) in adjacent metal disks corrugated with subwavelength spiral patterns. We show that the hybridization results in the splitting of spoof plasmon modes into bonding and antibonding resonances analogous to molecular orbital rule and plasmonic hybridization in optical spectrum. These hybrid modes can be manipulated to produce enormous field enhancements (larger than 5000) by tuning the separation between disks or alte...

  17. Marine Fish Hybridization

    KAUST Repository

    He, Song

    2017-04-01

    Natural hybridization is reproduction (without artificial influence) between two or more species/populations which are distinguishable from each other by heritable characters. Natural hybridizations among marine fishes were highly underappreciated due to limited research effort; it seems that this phenomenon occurs more often than is commonly recognized. As hybridization plays an important role in biodiversity processes in the marine environment, detecting hybridization events and investigating hybridization is important to understand and protect biodiversity. The first chapter sets the framework for this disseration study. The Cohesion Species Concept was selected as the working definition of a species for this study as it can handle marine fish hybridization events. The concept does not require restrictive species boundaries. A general history and background of natural hybridization in marine fishes is reviewed during in chapter as well. Four marine fish hybridization cases were examed and documented in Chapters 2 to 5. In each case study, at least one diagnostic nuclear marker, screened from among ~14 candidate markers, was found to discriminate the putative hybridizing parent species. To further investigate genetic evidence to support the hybrid status for each hybrid offspring in each case, haploweb analysis on diagnostic markers (nuclear and/or mitochondrial) and the DAPC/PCA analysis on microsatellite data were used. By combining the genetic evidences, morphological traits, and ecological observations together, the potential reasons that triggered each hybridization events and the potential genetic/ecology effects could be discussed. In the last chapter, sequences from 82 pairs of hybridizing parents species (for which COI barcoding sequences were available either on GenBank or in our lab) were collected. By comparing the COI fragment p-distance between each hybridizing parent species, some general questions about marine fish hybridization were discussed: Is

  18. Portraits of colloidal hybrid nanostructures: controlled synthesis and potential applications.

    Science.gov (United States)

    Nguyen, Thanh-Dinh

    2013-03-01

    Inorganic hybrid nanostructures containing two or more nanocomponents have been emerging in many areas of materials science in recent years. The particle-particle interactions in a hybrid particle system could significantly improve existing local electronic structure and induce tunable physiochemical responses. The current work reviews the diverse inorganic hybrid nanostructures formed by adhesion of the different single components via seed-mediated method. The hybrid nanomaterials have great potentials for real applications in many other fields. The nanohybrids have been used as efficient heterocatalysts for carbon monoxide conversion and photodegradation of organic contaminants. The enhanced catalytic activity of these hybrid nanocatalysts could be attributed the formation of oxygen vacancies and electron transfer across the structural junction in a hybrid system as a result of the interfacial particle-particle interactions. The synergistic combination of up-converting and semiconducting properties in an up-converting semiconducting hybrid particle results in appearance of sub-band-gap photoconductivity. This behavior has a great significance for the design of photovoltaic devices for effective solar energy conversion. The functionalization and subsequent bioconjugation of the hybrid nanostructures to afford the multifunctional nanomedical platforms for simultaneous diagnosis and therapy are reviewed. The conjugated multifunctional hybrid nanostructures exhibit high biocompatibility and highly selective binding with functional groups-fabricated alive organs through delivering them to the tumor sites. The clever combinations of multifunctional features and antibody conjugation within these vehicles make them to generally offer new opportunities for clinical diagnostics and therapeutics.

  19. Long-wave approximation for hybridization modeling of local surface plasmonic resonance in nanoshells.

    Science.gov (United States)

    Li, Ben Q; Liu, Changhong

    2011-01-15

    A hybridization model for the localized surface plasmon resonance of a nanoshell is developed within the framework of long-wave approximation. Compared with the existing hybridization model derived from the hydrodynamic simulation of free electron gas, this approach is much simpler and gives identical results for a concentric nanoshell. Also, with this approach, the limitations associated with the original hybridization model are succinctly stated. Extension of this approach to hybridization modeling of more complicated structures such as multiplayered nanoshells is straightforward.

  20. Insight into electronic and structural properties of CH3NH3PbX3 (X=Cl, Br, I) hybrid perovskites from tight binding modeling and NMR spectroscopy

    OpenAIRE

    Traoré, Boubacar; Roiland, Claire; Boyer-Richard, Soline; trippé-Allard, gaelle; Jemli, Khaoula; Deleporte, Emmanuelle; Jancu, Jean-Marc; Gautier, Régis; Le Pollès, Laurent; Even, Jacky; Katan, Claudine

    2016-01-01

    International audience; A significant breakthrough was achieved in the field of photovoltaics thanks to the use of hybrid perovskites in the context of solar cells. Currently, this extends to other technological applications such as lasers or detectors. The leading or prototype material has the general formula CH3NH3PbX3, where X is one or a mixture of halogen elements. The accelerating pace of scientific discovery and technological innovation calls for deeper insight into the intrinsic physi...

  1. Disruption of mitochondrial function in interpopulation hybrids of Tigriopus californicus.

    Science.gov (United States)

    Ellison, Christopher K; Burton, Ronald S

    2006-07-01

    Electron transport system (ETS) function in mitochondria is essential for the aerobic production of energy. Because ETS function requires extensive interactions between mitochondrial and nuclear gene products, coadaptation between mitochondrial and nuclear genomes may evolve within populations. Hybridization between allopatric populations may then expose functional incompatibilities between genomes that have not coevolved. The intertidal copepod Tigriopus californicus has high levels of nucleotide divergence among populations at mitochondrial loci and suffers F2 hybrid breakdown in interpopulation hybrids. We hypothesize that hybridization results in incompatibilities among subunits in ETS enzyme complexes and that these incompatibilities result in diminished mitochondrial function and fitness. To test this hypothesis, we measured fitness, mitochondrial function, and ETS enzyme activity in inbred recombinant hybrid lines of Tigriopus californicus. We found that (1) both fitness and mitochondrial function are reduced in hybrid lines, (2) only those ETS enzymes with both nuclear and mitochondrial subunits show a loss of activity in hybrid lines, and (3) positive relationships exist between ETS enzyme activity and mitochondrial function and between mitochondrial function and fitness. We also present evidence that hybrid lines harboring mitochondrial DNA (mtDNA) and mitochondrial RNA polymerase (mtRPOL) from the same parental source population have higher fitness than those with mtDNA and mtRPOL from different populations, suggesting that mitochondrial gene regulation may play a role in disruption of mitochondrial performance and fitness of hybrids. These results suggest that disruption of coadaptation between nuclear and mitochondrial genes contributes to the phenomenon of hybrid breakdown.

  2. Henkin and Hybrid Logic

    DEFF Research Database (Denmark)

    Blackburn, Patrick Rowan; Huertas, Antonia; Manzano, Maria;

    2014-01-01

    Leon Henkin was not a modal logician, but there is a branch of modal logic that has been deeply influenced by his work. That branch is hybrid logic, a family of logics that extend orthodox modal logic with special proposition symbols (called nominals) that name worlds. This paper explains why...... Henkin’s techniques are so important in hybrid logic. We do so by proving a completeness result for a hybrid type theory called HTT, probably the strongest hybrid logic that has yet been explored. Our completeness result builds on earlier work with a system called BHTT, or basic hybrid type theory...... is due to the first-order perspective, which lies at the heart of Henin’s best known work and hybrid logic....

  3. Hybrid propulsion with highest electric power density for the ML 450 BlueHYBRID; Hybridantrieb mit hoechster elektrischen Leistungsdichte fuer den ML 450 BlueHYBRID

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, Michael; Armstrong, Neil; Schenk, Juergen; Nietfeld, Franz; Inderka, Robert [Daimler AG, Stuttgart (Germany)

    2009-07-01

    The ML 450 BlueHYBRID is an elementary milestone in the strategy to the sustainable mobility at Daimler AG (Stuttgart, Federal Republic of Germany). This hybrid system based on the current M-class and is equipped with the innovative Two-Mode-Hybrid-System AHS-C with two high speed electrical engines. The entire propulsion system, the battery and power electronics and the strategy of operation particularly developed for this vehicle integrally provide for a significant reduction of consumption and emission. At the same time, the comfort of the total vehicle increases. In the ML 450 BlueHYBRID, a high volt battery on basis of nickel metal hydride is used. This battery consists of an extremely compact building method and enables an optimal packaging in the vehicle. For the first time, the cooling is performed with a liquid. This enables a stable operation in all situations. For the first time, the cooling takes place with a liquid and enables a stable enterprise in all situations. In connection with the AHS-C Two-Mode-Hybrid system, the battery system enables all hybrid-specific operation conditions such as a purely electrical tour, engine start stop, recupation, boosting. The ML 450 BlueHYBRID serially is produced in Tuscaloose (Alabama, USA). The manufacturing of the hybrid vehicle completely is integrated in the operation of work and is based on the existing serial production plants with hybrid-specific supplements and adjustments in assembly stations.

  4. Hybrid functional study of α-uranium

    Science.gov (United States)

    Kaur, Gurpreet; Chinnappan, Ravi; Panigrahi, B. K.

    2016-05-01

    We have used the hybrid density functionals to study the structural and electronic properties of alpha-U. The fraction of exact Hartree Folk exchange used is varied from 0.0 to 0.6. The equilibrium volume is found to be underestimated and bulk modulus overestimated with HSE as compared to both calculated by PBE and the experimental values. Electronic bands below the Fermi level are found to shift to lower energy with respect to PBE electronic bands which itself gives the bands shifted to lower energies as compared to UPS experiments.

  5. BSA Hybrid Synthesized Polymer

    Institute of Scientific and Technical Information of China (English)

    Zong Bin LIU; Xiao Pei DENG; Chang Sheng ZHAO

    2006-01-01

    Bovine serum albumin (BSA), a naturally occurring biopolymer, was regarded as a polymeric material to graft to an acrylic acid (AA)-N-vinyl pyrrolidone (NVP) copolymer to form a biomacromolecular hybrid polymer. The hybrid polymer can be blended with polyethersulfone (PES) to increase the hydrophilicity of the PES membrane, which suggested that the hybrid polymer might have a wide application in the modification of biomaterials.

  6. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Ronkko, Mauno; Ravn, Anders P.

    1997-01-01

    a differential action, which allows differential equations as primitive actions. The extension allows us to model hybrid systems with both continuous and discrete behaviour. The main result of this paper is an extension of such a hybrid action system with parallel composition. The extension does not change...... the original meaning of the parallel composition, and therefore also the ordinary action systems can be composed in parallel with the hybrid action systems....

  7. HYBRID VEHICLE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-06-01

    Full Text Available The hybrid vehicle control system includes a start–stop system for an internal combustion engine. The system works in a hybrid mode and normal vehicle operation. To simplify the start–stop system, there were user new possibilities of a hybrid car, which appeared after the conversion. Results of the circuit design of the proposed system of basic blocks are analyzed.

  8. Nanoscale Organic Hybrid Electrolytes

    KAUST Repository

    Nugent, Jennifer L.

    2010-08-20

    Nanoscale organic hybrid electrolytes are composed of organic-inorganic hybrid nanostructures, each with a metal oxide or metallic nanoparticle core densely grafted with an ion-conducting polyethylene glycol corona - doped with lithium salt. These materials form novel solvent-free hybrid electrolytes that are particle-rich, soft glasses at room temperature; yet manifest high ionic conductivity and good electrochemical stability above 5V. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Hybrid radiator cooling system

    Science.gov (United States)

    France, David M.; Smith, David S.; Yu, Wenhua; Routbort, Jules L.

    2016-03-15

    A method and hybrid radiator-cooling apparatus for implementing enhanced radiator-cooling are provided. The hybrid radiator-cooling apparatus includes an air-side finned surface for air cooling; an elongated vertically extending surface extending outwardly from the air-side finned surface on a downstream air-side of the hybrid radiator; and a water supply for selectively providing evaporative cooling with water flow by gravity on the elongated vertically extending surface.

  10. Hybrid nanoantennas for directional emission enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Rusak, Evgenia; Staude, Isabelle, E-mail: isabelle.staude@anu.edu.au; Decker, Manuel; Sautter, Jürgen; Miroshnichenko, Andrey E.; Powell, David A.; Neshev, Dragomir N.; Kivshar, Yuri S. [Nonlinear Physics Centre and Centre for Ultrahigh Bandwidth Devices for Optical Systems (CUDOS), Research School of Physics and Engineering, The Australian National University, Canberra, ACT 2601 (Australia)

    2014-12-01

    Plasmonic and dielectric nanoparticles offer complementary strengths regarding their use as optical antenna elements. While plasmonic nanoparticles are well-known to provide strong decay rate enhancement for localized emitters, all-dielectric nanoparticles can enable high directivity combined with low losses. Here, we suggest a hybrid metal-dielectric nanoantenna consisting of a gold nanorod and a silicon nanodisk, which combines all these advantages. Our numerical analysis reveals a giant enhancement of directional emission together with simultaneously high radiation efficiency (exceeding 70%). The suggested hybrid nanoantenna has a subwavelength footprint, and all parameters and materials are chosen to be compatible with fabrication by two-step electron-beam lithography.

  11. Hybrid Unifying Variable Supernetwork Model

    Institute of Scientific and Technical Information of China (English)

    LIU; Qiang; FANG; Jin-qing; LI; Yong

    2015-01-01

    In order to compare new phenomenon of topology change,evolution,hybrid ratio and network characteristics of unified hybrid network theoretical model with unified hybrid supernetwork model,this paper constructed unified hybrid variable supernetwork model(HUVSM).The first layer introduces a hybrid ratio dr,the

  12. Large Unifying Hybrid Supernetwork Model

    Institute of Scientific and Technical Information of China (English)

    LIU; Qiang; FANG; Jin-qing; LI; Yong

    2015-01-01

    For depicting multi-hybrid process,large unifying hybrid network model(so called LUHNM)has two sub-hybrid ratios except dr.They are deterministic hybrid ratio(so called fd)and random hybrid ratio(so called gr),respectively.

  13. Fluid and hybrid models for streamers

    Science.gov (United States)

    Bonaventura, Zdeněk

    2016-09-01

    Streamers are contracted ionizing waves with self-generated field enhancement that propagate into a low-ionized medium exposed to high electric field leaving filamentary trails of plasma behind. The widely used model to study streamer dynamics is based on drift-diffusion equations for electrons and ions, assuming local field approximation, coupled with Poisson's equation. For problems where presence of energetic electrons become important a fluid approach needs to be extended by a particle model, accompanied also with Monte Carlo Collision technique, that takes care of motion of these electrons. A combined fluid-particle approach is used to study an influence of surface emission processes on a fast-pulsed dielectric barrier discharge in air at atmospheric pressure. It is found that fluid-only model predicts substantially faster reignition dynamics compared to coupled fluid-particle model. Furthermore, a hybrid model can be created in which the population of electrons is divided in the energy space into two distinct groups: (1) low energy `bulk' electrons that are treated with fluid model, and (2) high energy `beam' electrons, followed as particles. The hybrid model is then capable not only to deal with streamer discharges in laboratory conditions, but also allows us to study electron acceleration in streamer zone of lighting leaders. There, the production of fast electrons from streamers is investigated, since these (runaway) electrons act as seeds for the relativistic runaway electron avalanche (RREA) mechanism, important for high-energy atmospheric physics phenomena. Results suggest that high energy electrons effect the streamer propagation, namely the velocity, the peak electric field, and thus also the production rate of runaway electrons. This work has been supported by the Czech Science Foundation research project 15-04023S.

  14. Hybrid Rocket Technology

    National Research Council Canada - National Science Library

    Sankaran Venugopal; K K Rajesh; V Ramanujachari

    2011-01-01

    With their unique operational characteristics, hybrid rockets can potentially provide safer, lower-cost avenues for spacecraft and missiles than the current solid propellant and liquid propellant systems...

  15. Hybrid FOSS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Armstrong researchers are continuing their efforts to further develop FOSS technologies. A hybrid FOSS technique (HyFOSS) employs conventional continuous grating...

  16. From hybrid swarms to swarms of hybrids

    Science.gov (United States)

    Stohlgren, Thomas J.; Szalanski, Allen L; Gaskin, John F.; Young, Nicholas E.; West, Amanda; Jarnevich, Catherine S.; Tripodi, Amber

    2015-01-01

    Science has shown that the introgression or hybridization of modern humans (Homo sapiens) with Neanderthals up to 40,000 YBP may have led to the swarm of modern humans on earth. However, there is little doubt that modern trade and transportation in support of the humans has continued to introduce additional species, genotypes, and hybrids to every country on the globe. We assessed the utility of species distributions modeling of genotypes to assess the risk of current and future invaders. We evaluated 93 locations of the genus Tamarix for which genetic data were available. Maxent models of habitat suitability showed that the hybrid, T. ramosissima x T. chinensis, was slightly greater than the parent taxa (AUCs > 0.83). General linear models of Africanized honey bees, a hybrid cross of Tanzanian Apis mellifera scutellata and a variety of European honey bee including A. m. ligustica, showed that the Africanized bees (AUC = 0.81) may be displacing European honey bees (AUC > 0.76) over large areas of the southwestern U.S. More important, Maxent modeling of sub-populations (A1 and A26 mitotypes based on mDNA) could be accurately modeled (AUC > 0.9), and they responded differently to environmental drivers. This suggests that rapid evolutionary change may be underway in the Africanized bees, allowing the bees to spread into new areas and extending their total range. Protecting native species and ecosystems may benefit from risk maps of harmful invasive species, hybrids, and genotypes.

  17. Electronic Structure of Au25 Clusters: Between Discrete and Continuous

    KAUST Repository

    Katsiev, Khabiboulakh

    2016-07-15

    Here, an approach based on synchrotron resonant photoemission is emplyed to explore the transition between quantization and hybridization of the electronic structure in atomically precise ligand-stabilized nanoparticles. While the presence of ligands maintains quantization in Au25 clusters, their removal renders increased hybridization of the electronic states at the vicinity of the Fermi level. These observations are supported by DFT studies.

  18. Silicon nanocrystal-noble metal hybrid nanoparticles

    Science.gov (United States)

    Sugimoto, H.; Fujii, M.; Imakita, K.

    2016-05-01

    We report a novel and facile self-limiting synthesis route of silicon nanocrystal (Si NC)-based colloidally stable semiconductor-metal (gold, silver and platinum) hybrid nanoparticles (NPs). For the formation of hybrid NPs, we employ ligand-free colloidal Si NCs with heavily boron (B) and phosphorus (P) doped shells. By simply mixing B and P codoped colloidal Si NCs with metal salts, hybrid NPs consisting of metal cores and Si NC shells are spontaneously formed. We demonstrate the synthesis of highly uniform and size controllable hybrid NPs. It is shown that codoped Si NCs act as a reducing agent for metal salts and also as a protecting layer to stop metal NP growth. The process is thus self-limiting. The development of a variety of Si NC-based hybrid NPs is a promising first step for the design of biocompatible multifunctional NPs with broad material choices for biosensing, bioimaging and solar energy conversion.We report a novel and facile self-limiting synthesis route of silicon nanocrystal (Si NC)-based colloidally stable semiconductor-metal (gold, silver and platinum) hybrid nanoparticles (NPs). For the formation of hybrid NPs, we employ ligand-free colloidal Si NCs with heavily boron (B) and phosphorus (P) doped shells. By simply mixing B and P codoped colloidal Si NCs with metal salts, hybrid NPs consisting of metal cores and Si NC shells are spontaneously formed. We demonstrate the synthesis of highly uniform and size controllable hybrid NPs. It is shown that codoped Si NCs act as a reducing agent for metal salts and also as a protecting layer to stop metal NP growth. The process is thus self-limiting. The development of a variety of Si NC-based hybrid NPs is a promising first step for the design of biocompatible multifunctional NPs with broad material choices for biosensing, bioimaging and solar energy conversion. Electronic supplementary information (ESI) available: Additional TEM images and extinction spectra of Si-metal hybrid NPs are shown in Fig. S1

  19. Comparative study of symmetric and asymmetric somatic hybridization between common wheat and Haynaldia villosa

    Institute of Scientific and Technical Information of China (English)

    ZHOU; Aifen

    2001-01-01

    [1]Li, Z. Y., Xia, G. M., Chen, H. M., Somatic embryogenesis and plant regeneration from protoplasts isolated from embryo-genic cell suspensions of wheat (Triticum aestivum L.), Plant Cell, Tissue and Organ Culture, 1992, 98: 79-85.[2]Zhou, A. F., Xia, G. M., Chen, H. M., Asymmetric somatic hybridization between Triticum aestivum and Haynaldia vil-losa, Science in China, Ser. C, 1996, 39(6): 617-626.[3]Zhou, A. F., Xia, G. M., Chen, H. M. et al., Effect of 60Co-g radiation on calli of Haynaldia villosa, Chinese J. of Bio-technology, 1996, 12(Supplement): 127-130.[4]Xia, G. M., Chen, H. M., Wang, H., Somatic hybridization and regeneration capacity complementation between common wheat (T. aestivum) and Agropyron elongatum. J. Shandong University, 1995, 30(3): 325-330.[5]Xia, G. M., Chen, H. M., Plant regeneration from intergeneric somatic hybridization between Triticum aestivum L. and Leymus chinensis (Trin.)Tzvel., Plant Science, 1996, 120: 197-203.[6]Doyle, J. J., Doyle, J. L., Isolation of plant DNA from fresh tissue, Focus, 1990, 12: 13-15.[7]Zhou, A. F., Xu, C. H., Xiang, F. N. et al., Study on the identification of somatic hybrids by PCR with 5S rDNA spacer se-quence primers, Chinese J. of Biotechnology, 1999, 15(4): 529-532.[8]Ma, J. X., Zhou, R. H., Jia, J. Z. et al., Identification of wheat-Haynaldia villosa substitution lines conferring resistance to powdery mildew using genomic in situ hybridization (GISH) and RFLP markers, Acta Genetica Sinica, 1997, 24(5): 447-452.[9]Zhou, R. H., Jia, J. Z., Dong, Y. C. et al., Characterization of progenies of Triticum aestivum-Psathyrostachys juncea de-rivatives by using genomic in-situ hybridization, Science in China, Ser. C, 1997, 40(6): 657-664.[10]Parokonny, A. S., Kenton, A. Y., Gleba, Y. Y. et al., Genomic reorganization in Nicotiana asymmetric somatic hybrids analysed by in situ hybridization. Plant Journal, 1992, 2: 863-874.[11]Piastuch, W. C., Bates, G. W

  20. Cardiac hybrid imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gaemperli, Oliver [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); University Hospital Zurich, Nuclear Cardiology, Cardiovascular Center, Zurich (Switzerland); Kaufmann, Philipp A. [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland)

    2014-05-15

    Hybrid cardiac single photon emission computed tomography (SPECT)/CT imaging allows combined assessment of anatomical and functional aspects of cardiac disease. In coronary artery disease (CAD), hybrid SPECT/CT imaging allows detection of coronary artery stenosis and myocardial perfusion abnormalities. The clinical value of hybrid imaging has been documented in several subsets of patients. In selected groups of patients, hybrid imaging improves the diagnostic accuracy to detect CAD compared to the single imaging techniques. Additionally, this approach facilitates functional interrogation of coronary stenoses and guidance with regard to revascularization procedures. Moreover, the anatomical information obtained from CT coronary angiography or coronary artery calcium scores (CACS) adds prognostic information over perfusion data from SPECT. The use of cardiac hybrid imaging has been favoured by the dissemination of dedicated hybrid systems and the release of dedicated image fusion software, which allow simple patient throughput for hybrid SPECT/CT studies. Further technological improvements such as more efficient detector technology to allow for low-radiation protocols, ultra-fast image acquisition and improved low-noise image reconstruction algorithms will be instrumental to further promote hybrid SPECT/CT in research and clinical practice. (orig.)

  1. Hybrid intelligent engineering systems

    CERN Document Server

    Jain, L C; Adelaide, Australia University of

    1997-01-01

    This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

  2. A Hybrid Imagination

    DEFF Research Database (Denmark)

    Jamison, Andrew; Christensen, Steen Hyldgaard; Botin, Lars

    contexts, or sites, for mixing scientific knowledge and technical skills from different fields and social domains into new combinations, thus fostering what the authors term a “hybrid imagination”. Such a hybrid imagination is especially important today, as a way to counter the competitive and commercial...

  3. Hybrid trajectory spaces

    NARCIS (Netherlands)

    Collins, P.J.

    2005-01-01

    In this paper, we present a general framework for describing and studying hybrid systems. We represent the trajectories of the system as functions on a hybrid time domain, and the system itself by its trajectory space, which is the set of all possible trajectories. The trajectory space is given a na

  4. Editorial: Hybrid Systems

    DEFF Research Database (Denmark)

    Olderog, Ernst-Rüdiger; Ravn, Anders Peter

    2007-01-01

    An introduction to three papers in a special issue on Hybrid Systems. These paper were first presented at an IFIP WG 2.2 meeting in Skagen 2005.......An introduction to three papers in a special issue on Hybrid Systems. These paper were first presented at an IFIP WG 2.2 meeting in Skagen 2005....

  5. Hybrid reactors. [Fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.

    1980-09-09

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of /sup 233/U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m/sup -2/, and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid.

  6. Hybrid propulsion technology program

    Science.gov (United States)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  7. Electronic Configuration of Yb Compounds

    Energy Technology Data Exchange (ETDEWEB)

    Temmerman, W.M.; Szotek, Z. [Daresbury Laboratory, Daresbury, Warrington, WA4 4AD, Cheshire (United Kingdom); Svane, A. [Institute of Physics and Astronomy, University of Aarhus, DK-8000 Aarhus C (Denmark); Strange, P. [Physics Department, Keele University, Keele, Staffordshire, ST5 5BG (United Kingdom); Winter, H. [INFP, Forschungszentrum Karlsruhe GmbH, Postfach 3640, D-76021 Karlsruhe (Germany); Delin, A.; Johansson, B.; Eriksson, O.; Fast, L. [Condensed Matter Theory Group, Department of Physics, University of Uppsala, Box 530, 75121 Uppsala (Sweden); Wills, J.M. [Center of Materials Science and Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87544 (United States)

    1999-11-01

    The total energy differences between divalent and trivalent configurations of Yb ions in a number of Yb compounds are studied. Two different band theoretical methods, which differ in the treatment of the localized f electrons, are used. The results show that in all Yb compounds the valence energy differences are equal to the energy needed to localize an f electron. These valence energy differences correlate with the number of f electrons hybridizing with the conduction bands in the trivalent configuration. For divalent YbS, the pressure induced f -electron delocalization implies an intermediate valency, as also indicated by experiment. {copyright} {ital 1999} {ital The American Physical Society }

  8. p-Doping of graphene in hybrid materials with 3,10-diazapicenium dications† †Electronic supplementary information (ESI) available: Synthetic details and additional spectra. See DOI: 10.1039/c7sc00533d Click here for additional data file.

    Science.gov (United States)

    Roth, Alexandra; Schaub, Tobias A.; Meinhardt, Ute; Thiel, Dominik; Storch, Jan; Církva, Vladimír; Jakubík, Pavel

    2017-01-01

    N,N′-Didodecyl-substituted 3,10-diazapicenium salts featuring bromide and hexafluorophosphate counterions have been designed as novel dopants to realize individualized graphene sheets in a series of cutting edge experiments and to intrinsically stabilize them via p-doping. Importantly, electrochemical studies revealed two consecutive irreversible one-electron reductions of the N,N′-didodecyl-substituted 3,10-diazapicenium salts to yield the corresponding radical cation and neutral quinoidal species. Formation of both species was accompanied by characteristic changes in the absorption spectra. The 3,10-diazapicenium bromide was found to be a potent dopant to produce hybrid materials with exfoliated graphene. Microscopy based on AFM and TEM imaging and spectroscopy based on Raman probing corroborated that, upon drying, the hybrid material consists of few layer (5–8 layers) turbostratic graphene sheets that are p-doped. Our findings identify the newly synthesized N,N′-dialkylated 3,10-diazapicenium salts as highly promising candidates for the fabrication of functional graphene materials with tailored properties. PMID:28507723

  9. Multitarget Molecular Hybrids of Cinnamic Acids

    Directory of Open Access Journals (Sweden)

    Aikaterini Peperidou

    2014-12-01

    Full Text Available In an attempt to synthesize potential new multitarget agents, 11 novel hybrids incorporating cinnamic acids and paracetamol, 4-/7-hydroxycoumarin, benzocaine, p-aminophenol and m-aminophenol were synthesized. Three hybrids—2e, 2a, 2g—and 3b were found to be multifunctional agents. The hybrid 2e derived from the phenoxyphenyl cinnamic acid and m-acetamidophenol showed the highest lipoxygenase (LOX inhibition and analgesic activity (IC50 = 0.34 μΜ and 98.1%, whereas the hybrid 3b of bromobenzyloxycinnamic acid and hymechromone exhibited simultaneously good LOX inhibitory activity (IC50 = 50 μΜ and the highest anti-proteolytic activity (IC50= 5 μΜ. The hybrid 2a of phenyloxyphenyl acid with paracetamol showed a high analgesic activity (91% and appears to be a promising agent for treating peripheral nerve injuries. Hybrid 2g which has an ester and an amide bond presents an interesting combination of anti-LOX and anti-proteolytic activity. The esters were found very potent and especially those derived from paracetamol and m-acetamidophenol. The amides follow. Based on 2D-structure–activity relationships it was observed that both steric and electronic parameters play major roles in the activity of these compounds. Molecular docking studies point to the fact that allosteric interactions might govern the LOX-inhibitor binding.

  10. Destination bonding: Hybrid cognition using Instagram

    Directory of Open Access Journals (Sweden)

    Arup Kumar Baksi

    2015-01-01

    Full Text Available Empirical research has identified the phenomenon of destination bonding as a result of summated physical and emotional values associated with the destination. Physical values, namely natural landscape & other physical settings and emotional values, namely the enculturation processes, have a significant role to play in portraying visitors’ cognitive framework for destination preference. The physical values seemed to be the stimulator for bonding that embodies action or behavior tendencies in imagery. The emotional values were the conditions that lead to affective bonding and are reflected in attitudes for a place which were evident in text narratives. Social networking on virtual platforms offers the scope for hybrid cognitive expression using imagery and text to the visitors. Instagram has emerged as an application-window to capture these hybrid cognitions of visitors. This study focuses on assessing the relationship between hybrid cognition of visitors expressed via Instagram and their bond with the destination. Further to this, the study attempts to examine the impact of hybrid cognition of visitors on the behavioral pattern of prospective visitors to the destination. The study revealed that sharing of visual imageries and related text by the visitors is an expression of the physico-emotional bonding with the destination. It was further established that hybrid cognition strongly asserts destination bonding and has been also found to have moderating impact on the link between destination bonding and electronic-word-of-mouth.

  11. Evolution of a Laser Hybrid Welding Map

    Science.gov (United States)

    Kaplan, Alexander F. H.; Frostevarg, Jan; Ilar, Torbjörn; Bang, Hee-Seon; Bang, Han-Sur

    Laser arc hybrid welding combines the advantages but also the complex physical mechanisms of gas metal arc welding and laser keyhole welding. From manifold mainly experimental but also theoretical research results a map with versatile functions was initiated for the first time. The purpose is to survey the overall context and to facilitate navigation to the various phenomena that are shown through case studies accompanied by theoretical explanations and guidelines for optimization. Though not complete, the map enables systematic and graphical navigation to relevant publications. Based on a fundamental structure of the map, which was decided early, it is inherently extendable in the future by adding existing and new knowledge, also from other research groups, enabling evolution. The fundament of the map structure comprises gouge thickness, joint type and metal grade, in coherence with product and weld designers' starting points. The next hierarchy level of the map offers options in the joint type as well as in hybrid welding techniques. The latter contains techniques like double-sided welding, pulse shaping management of the arc or laser, CMT arcs, tandem arcs, or remelting of undercuts. In addition to laser-arc hybrid welding, other hybrid laser techniques like multilayer hot-wire laser welding of narrow gaps or hybrid laser friction stir welding can be taken into account. At the other end of the hierarchy, the map offers via a database-like archive electronic navigation to research results like weld macrographs, high speed imaging or numerical simulation results of the welding process.

  12. Comparison performance of split plug-in hybrid electric vehicle and hybrid electric vehicle using ADVISOR

    Directory of Open Access Journals (Sweden)

    Mohd Rashid Muhammad Ikram

    2017-01-01

    Full Text Available Electric vehicle suffers from relatively short range and long charging times and consequently has not become an acceptable solution to the automotive consumer. The addition of an internal combustion engine to extend the range of the electric vehicle is one method of exploiting the high efficiency and lack of emissions of the electric vehicle while retaining the range and convenient refuelling times of a conventional gasoline powered vehicle. The term that describes this type of vehicle is a hybrid electric vehicle. Many configurations of hybrid electric vehicles have been designed and implemented, namely the series, parallel and power-split configurations. This paper discusses the comparison between Split Plug-in Hybrid Electric Vehicle(SPHEV and Hybrid Electric Vehicle(HEV. Modelling methods such as physics-based Resistive Companion Form technique and Bond Graph method are presented with powertrain component and system modelling examples. The modelling and simulation capability of existing tools such as ADvanced VehIcle SimulatOR (ADVISOR is demonstrated through application examples. Since power electronics is indispensable in hybrid vehicles, the issue of numerical oscillations in dynamic simulations involving power electronics is briefly addressed.

  13. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the fields of power conversion devices and broadcasting/communication amplifiers, high power, high frequency and low losses are desirable. Further, for electronic elements in aerospace/aeronautical/geothermal surveys, etc., heat resistance to 500degC is required. Devices which respond to such hard specifications are called hard electronic devices. However, with Si which is at the core of the present electronics, the specifications cannot fully be fulfilled because of the restrictions arising from physical values. Accordingly, taking up new device materials/structures necessary to construct hard electronics, technologies to develop these to a level of IC were examined and studied. They are a technology to make devices/IC of new semiconductors such as SiC, diamond, etc. which can handle higher temperature, higher power and higher frequency than Si and also is possible of reducing losses, a technology to make devices of hard semiconducter materials such as a vacuum microelectronics technology using ultra-micro/high-luminance electronic emitter using negative electron affinity which diamond, etc. have, a technology to make devices of oxides which have various electric properties, etc. 321 refs., 194 figs., 8 tabs.

  14. Lower hybrid waves at the shock front: a reassessment

    Directory of Open Access Journals (Sweden)

    S. N. Walker

    2008-03-01

    Full Text Available The primary process occurring at a collisionless shock is the redistribution of the bulk upstream energy into other degrees of freedom. One part of this process results in the acceleration of electrons at the shock front. Accelerated electrons are observed at the terrestrial and other planetary shocks, comets, and their effects are observed in astrophysical phenomena such as supernova remnants and jets in the form of X-ray bremsstrahlung radiation. One of the physical models for electron acceleration at supercritical shocks is based on low-hybrid turbulence due to the presence of reflected ions in the foot region. Since lower hybrid waves propagate almost perpendicular to the magnetic field they can be simultaneously in resonance with both the unmagnetised ions (ω=Vik and magnetised electrons (ω=Vek||. In this paper, Cluster observations of the electric field are used to study the occurrence of lower hybrid waves in the front of the terrestrial bow shock. It is shown that the lower hybrid waves exist as isolated wave packets. However, the very low level of the observed lower hybrid turbulence is too small to impart significant energisation to the electron population.

  15. In Vitro Degradation of Polyglycolide/Chitosan Hybrid Braids

    Institute of Scientific and Technical Information of China (English)

    YUAN Xiaoyan; ZHANG Qingwei; WANG Yonglin; YAO Kangde

    2005-01-01

    Hybrid braids of polyglycolide (PGA) and chitosan were prepared by the three-yarn braiding method from PGA and chitosan fiber bundles. These braids were in vitro degraded by incubating them in phosphate buffered saline (PBS) at pH 7.4 and 37 ℃ for 5 weeks. Results suggested that PGA/chitosan hybrid braids degraded significantly. Scanning electron micrographs showed that chitosan fibers in the PGA/chitosan hybrid braid with about 750% PGA in weight (PGA75/chitosan) were shaped into gel-like after 5 weeks, but those in the hybrid braid with about 250% PGA in weight (PGA25/chitosan) did not change. After 5 weeks, the ultimate tensile loads of PGA and PGA75/chitosan braids lost almost completely, but those of chitosan and PGA25/chitosan braids remained around 14 N. The PGA/chitosan hybrid braids with higher initial ultimate tensile load would have potential applications in tendon/ligament tissue reconstruction.

  16. Carboxylated nitrile butadiene rubber/hybrid filler composites

    Directory of Open Access Journals (Sweden)

    Ahmad Mousa

    2012-08-01

    Full Text Available The surface properties of the OSW and NLS are measured with the dynamic contact-angle technique. The x-ray photoelectron spectroscopy (XPS of the OSW reveals that the OSW possesses various reactive functional groups namely hydroxyl groups (OH. Hybrid filler from NLS and OSW were incorporated into carboxylated nitrile rubber (XNBR to produce XNBR hybrid composites. The reaction of OH groups from the OSW with COOH of the XNBR is checked by attenuated total reflectance spectra (ATR-IR of the composites. The degree of curing ΔM (maximum torque-minimum torque as a function of hybrid filler as derived from moving die rheometer (MDR is reported. The stress-strain behavior of the hybrid composites as well as the dynamic mechanical thermal analysis (DMTA is studied. Bonding quality and dispersion of the hybrid filler with and in XNBR are examined using scanning-transmission electron microscopy (STEM in SEM.

  17. Preparation of PAA/AM/MMT Hybrid by Intercalation Polymerization

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Over the last few years, Montmorillonite (MMT) was widely used as a special inorganic material for preparing Polymer/MMT nanocompsites. MMT is a clay imineral consisting of stacked silicate sheets whose thickness is about 10A. Through intercalation a large number of polymer-clay nanocomposites have been prepared such as Nylon-clay hybrid [1], PS-clay hybrid [2], Poly (methyl methacrylate) (PMMA)-clay hybrid [3], etc. In this article, the synthesis and properties of Poly (acrylic acid/acrylamide)/MMT hybrid (PAAAM/MMT) were studied. X-ray diffraction and Transmission electron microscopy were used to characterize the hybrid material. DSC has been used to study its property. Results showed that the intercalating reagents have entered the space of MMT's layers and enlarged them. At the same time, the MMT dispersed homogeneously in acrylic acid and acrylamide monomers that allow MMT to disperse in PAAAM matrix in the monolayer form.

  18. Hybrid electric vehicles TOPTEC

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-21

    This one-day TOPTEC session began with an overview of hybrid electric vehicle technology. Updates were given on alternative types of energy storage, APU control for low emissions, simulation programs, and industry and government activities. The keynote speech was about battery technology, a key element to the success of hybrids. The TOPEC concluded with a panel discussion on the mission of hybrid electric vehicles, with a perspective from industry and government experts from United States and Canada on their view of the role of this technology.

  19. Hybrid systems with constraints

    CERN Document Server

    Daafouz, Jamal; Sigalotti, Mario

    2013-01-01

    Control theory is the main subject of this title, in particular analysis and control design for hybrid dynamic systems.The notion of hybrid systems offers a strong theoretical and unified framework to cope with the modeling, analysis and control design of systems where both continuous and discrete dynamics interact. The theory of hybrid systems has been the subject of intensive research over the last decade and a large number of diverse and challenging problems have been investigated. Nevertheless, many important mathematical problems remain open.This book is dedicated mainly to

  20. Hybrid Bloch Brane

    CERN Document Server

    Bazeia, D; Losano, L

    2016-01-01

    This work reports on models described by two real scalar fields coupled with gravity in the five-dimensional spacetime, with a warped geometry involving one infinite extra dimension. Through a mechanism that smoothly changes a thick brane into a hybrid brane, one investigates the appearance of hybrid branes hosting internal structure, characterized by the splitting on the energy density and the volcano potential, induced by the parameter which controls interactions between the two scalar fields. In particular, we investigate distinct symmetric and asymmetric hybrid brane scenarios.

  1. Hybrid Bloch brane

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Lima, Elisama E.M.; Losano, L. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil)

    2017-02-15

    This work reports on models described by two real scalar fields coupled with gravity in the five-dimensional spacetime, with a warped geometry involving one infinite extra dimension. Through a mechanism that smoothly changes a thick brane into a hybrid brane, one investigates the appearance of hybrid branes hosting internal structure, characterized by the splitting on the energy density and the volcano potential, induced by the parameter which controls interactions between the two scalar fields. In particular, we investigate distinct symmetric and asymmetric hybrid brane scenarios. (orig.)

  2. Electronic Cigarettes

    Science.gov (United States)

    ... New FDA Regulations Text Size: A A A Electronic Cigarettes Electronic cigarettes (e-cigarettes) are battery operated products designed ... more about: The latest news and events about electronic cigarettes on this FDA page Electronic cigarette basics ...

  3. Effect of organic chain length on structure, electronic composition, lattice potential energy, and optical properties of 2D hybrid perovskites [(NH3)(CH2) n (NH3)]CuCl4, n = 2-9

    Science.gov (United States)

    Abdel-Aal, Seham K.; Kocher-Oberlehner, Gudrun; Ionov, Andrei; Mozhchil, R. N.

    2017-08-01

    Diammonium series of Cu hybrid perovskites of the formula [(NH3)(CH2) n (NH3)]CuCl4, n = 6-9 are prepared from an ethanolic solution in stoichiometric ratio 1:1 (organic/inorganic). Formation of the desired material was confirmed and characterizes by microchemical analysis, FTIR, XRD and XPS spectra. The structure consists of corner-shared octahedron [CuCl4]2- anion alternative by organic [(NH3)(CH2) n (NH3)]2+ cations. The organic and inorganic layers form infinite 2D sheet that are connected via NH···Cl hydrogen bond. The calculated lattice potential energy U pot (kJ/mol) and lattice enthalpy Δ H L (kJ/mol) are inversely proportional to the molecular volume V m (nm3) and organic chain length. Optical properties show strong absorption peak at UV-visible range. The band gap energy calculated using Kubelka-Munk equation shows the decrease of the energy gap as organic chain length increases. The introduction of bromide ion to [(NH3)(CH2) n (NH3)]CuCl2Br2 denoted 2C7CuCB hybrid has shifted the energy gap to lower values from 2.6 to 2.18 eV for 2C7CuCl (yellow) and 2C7CuCB (brown), respectively, at the same organic chain length. All elements of [(NH3)(CH2)9(NH3)]CuCl4 and [(NH3)(CH2)7(NH3)]CuCl2Br2 were found in XPS spectra, as well as valence band spectra.

  4. Brownian refrigeration by hybrid tunnel junctions

    OpenAIRE

    Peltonen, J. T.; Helle, M.; Timofeev, A. V.; Solinas, P.; Hekking, F. W. J.; Pekola, Jukka P.

    2011-01-01

    Voltage fluctuations generated in a hot resistor can cause extraction of heat from a colder normal metal electrode of a hybrid tunnel junction between a normal metal and a superconductor. We extend the analysis presented in Phys. Rev. Lett. 98, 210604 (2007) of this heat rectifying system, bearing resemblance to a Maxwell’s demon. Explicit analytic calculations show that the entropy of the total system is always increasing. We then consider a single-electron transistor configuration with two ...

  5. Chaotic mixer improves microarray hybridization.

    Science.gov (United States)

    McQuain, Mark K; Seale, Kevin; Peek, Joel; Fisher, Timothy S; Levy, Shawn; Stremler, Mark A; Haselton, Frederick R

    2004-02-15

    Hybridization is an important aspect of microarray experimental design which influences array signal levels and the repeatability of data within an array and across different arrays. Current methods typically require 24h and use target inefficiently. In these studies, we compare hybridization signals obtained in conventional static hybridization, which depends on diffusional target delivery, with signals obtained in a dynamic hybridization chamber, which employs a fluid mixer based on chaotic advection theory to deliver targets across a conventional glass slide array. Microarrays were printed with a pattern of 102 identical probe spots containing a 65-mer oligonucleotide capture probe. Hybridization of a 725-bp fluorescently labeled target was used to measure average target hybridization levels, local signal-to-noise ratios, and array hybridization uniformity. Dynamic hybridization for 1h with 1 or 10ng of target DNA increased hybridization signal intensities approximately threefold over a 24-h static hybridization. Similarly, a 10- or 60-min dynamic hybridization of 10ng of target DNA increased hybridization signal intensities fourfold over a 24h static hybridization. In time course studies, static hybridization reached a maximum within 8 to 12h using either 1 or 10ng of target. In time course studies using the dynamic hybridization chamber, hybridization using 1ng of target increased to a maximum at 4h and that using 10ng of target did not vary over the time points tested. In comparison to static hybridization, dynamic hybridization reduced the signal-to-noise ratios threefold and reduced spot-to-spot variation twofold. Therefore, we conclude that dynamic hybridization based on a chaotic mixer design improves both the speed of hybridization and the maximum level of hybridization while increasing signal-to-noise ratios and reducing spot-to-spot variation.

  6. The Electron

    Energy Technology Data Exchange (ETDEWEB)

    Thomson, George

    1972-01-01

    Electrons are elementary particles of atoms that revolve around and outside the nucleus and have a negative charge. This booklet discusses how electrons relate to electricity, some applications of electrons, electrons as waves, electrons in atoms and solids, the electron microscope, among other things.

  7. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  8. Antimycoplasmal antibiotics and hybrid sterility in Drosophila paulistorum.

    Science.gov (United States)

    Kernaghan, R P; Ehrman, L

    1970-07-03

    Male hybrids between the Santa Marta and Mesitas strains of Drosophila paulistorum are sterile. The sterility can be partially alleviated by treatment of the Santa Marta mothers with the antimycoplasmal antibiotics tylosin tartrate and tetracycline hydrochloride. The proportions of hybrid males in which there are mature motile spermatozoa are higher in the progenies of drug-treated mothers than in the controls. Electron microscopy reveals mycoplasma-like bodies in the untreated controls, but not in the sons of the treated females. The mycoplasma-like symbionts appear to be implicated in the production of the sterility in the hybrid males.

  9. Hybrid polymer microspheres

    Science.gov (United States)

    Rembaum, A.

    1980-01-01

    Techniques have been successfully tested for bonding polymeric spheres, typically 0.1 micron in diameter, to spheres with diameter up to 100 microns. Hybrids are being developed as improved packing material for ion-exchange columns, filters, and separators.

  10. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  11. Functional hybrid materials

    National Research Council Canada - National Science Library

    Fahmi, Amir; Pietsch, Torsten; Mendoza, Cesar; Cheval, Nicolas

    2009-01-01

    .... This paper describes our group's achievements towards the development of multifunctional nanostructures via self-assembly of hybrid systems based on the block copolymer PS-b-P4VP and inorganic nanoparticles (NPs...

  12. Hybrid Rocket Technology

    Directory of Open Access Journals (Sweden)

    Sankaran Venugopal

    2011-04-01

    Full Text Available With their unique operational characteristics, hybrid rockets can potentially provide safer, lower-cost avenues for spacecraft and missiles than the current solid propellant and liquid propellant systems. Classical hybrids can be throttled for thrust tailoring, perform in-flight motor shutdown and restart. In classical hybrids, the fuel is stored in the form of a solid grain, requiring only half the feed system hardware of liquid bipropellant engines. The commonly used fuels are benign, nontoxic, and not hazardous to store and transport. Solid fuel grains are not highly susceptible to cracks, imperfections, and environmental temperature and are therefore safer to manufacture, store, transport, and use for launch. The status of development based on the experience of the last few decades indicating the maturity of the hybrid rocket technology is given in brief.Defence Science Journal, 2011, 61(3, pp.193-200, DOI:http://dx.doi.org/10.14429/dsj.61.518

  13. Nitrous Paraffin Hybrid Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nitrous Oxide Paraffin Hybrid engine (N2OP) is a proposed technology designed to provide small launch vehicles with high specific impulse, indefinitely storable...

  14. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  15. Hybridity in Disgrace

    Institute of Scientific and Technical Information of China (English)

    刘建平

    2015-01-01

    John Maxwell Coetzee's masterpiece-Disgrace is the representative work about post colonialism.The novel describes a series of disgraceful events happened between the white and the black in the post apartheid South Africa.The famous literature theory-hybridity of Homi K.Bhabha is the very key theory to analyze the work.In post apartheid South Africa,hybridity is the only way for the white and the black to coexist.

  16. Hybrid Baryon Signatures

    CERN Document Server

    Page, P R

    2000-01-01

    We discuss whether a low-lying hybrid baryon should be defined as a three quark - gluon bound state or as three quarks moving on an excited adiabatic potential. We show that the latter definition becomes exact, not only for very heavy quarks, but also for specific dynamics. We review the literature on the signatures of hybrid baryons, with specific reference to strong hadronic decays, electromagnetic couplings, diffractive production and production in psi decay.

  17. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  18. Requirements for Hybrid Cosimulation

    Science.gov (United States)

    2014-08-16

    hybrid cosimulation version of the Functional Mockup Interface (FMI) standard. A cosimulation standard de nes interfaces that enable diverse simulation...cosimulation standards, and specifically provides guidance for development of a hybrid cosimulation version of the Functional Mockup Interface (FMI) standard...V. Peetz, and S. Wolf. The functional mockup interface for tool independent exchange of simulation models. In Proc. of the 8-th International

  19. High performance carbon nanotube - polymer nanofiber hybrid fabrics

    Science.gov (United States)

    Yildiz, Ozkan; Stano, Kelly; Faraji, Shaghayegh; Stone, Corinne; Willis, Colin; Zhang, Xiangwu; Jur, Jesse S.; Bradford, Philip D.

    2015-10-01

    conductivity. In order to further examine the hybrid fabric properties, they were consolidated under pressure, and also calendered at 70 °C. After calendering, the fabric's strength increased by an order of magnitude due to increased interactions and intermingling with the CNTs. The hybrids are highly efficient as aerosol filters; consolidated hybrid fabrics with a thickness of 20 microns and areal density of only 8 g m-2 exhibited ultra low particulate (ULPA) filter performance. The flexibility of this nanofabrication method allows for the use of many different polymer systems which provides the opportunity for engineering a wide range of nanoscale hybrid materials with desired functionalities. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr02732b

  20. Engineering semiconductor hybrids for sensing

    Science.gov (United States)

    Gumbs, Godfrey; Iurov, Andrii; Huang, Danhong

    2016-06-01

    The effect of screening of the coulomb interaction between two layers of two-dimensional electrons, such as in graphene, by a highly doped semiconducting substrate is investigated. We employ the random-phase approximation to calculate the dispersion equation of this hybrid structure in order to determine the plasmon excitation spectrum. When an electric current is passed through a layer, the low-frequency plasmons in the layer may bifurcate into separate streams due to the current-driving effect. At a critical wave vector, determined by the separation between layers and their distance from the surface, their phase velocities may be in opposite directions and a surface plasmon instability leads to the emission of radiation. Applications to detectors and other electromagnetic devices exploiting nano-plasmonics are discussed.

  1. Hybrid mask for deep etching

    KAUST Repository

    Ghoneim, Mohamed T.

    2017-08-10

    Deep reactive ion etching is essential for creating high aspect ratio micro-structures for microelectromechanical systems, sensors and actuators, and emerging flexible electronics. A novel hybrid dual soft/hard mask bilayer may be deposited during semiconductor manufacturing for deep reactive etches. Such a manufacturing process may include depositing a first mask material on a substrate; depositing a second mask material on the first mask material; depositing a third mask material on the second mask material; patterning the third mask material with a pattern corresponding to one or more trenches for transfer to the substrate; transferring the pattern from the third mask material to the second mask material; transferring the pattern from the second mask material to the first mask material; and/or transferring the pattern from the first mask material to the substrate.

  2. Coaxial hybrid iron (CHI) wiggler

    Science.gov (United States)

    Jackson, Robert H.; Freund, Henry P.; Pershing, Dean E.; Taccetti, J. M.

    1993-11-01

    A magnetic wiggler design has been developed for applications in free-electron lasers which is scalable to small periods with high field amplitude, high beam current acceptance, and excellent transverse focusing and beam propagation properties. The Coaxial Hybrid Iron (CHI) wiggler design consists of a coaxial arrangement of alternating ferromagnetic and non- ferromagnetic rings with the central portion of the coax shifted by one half period. The entire arrangement is immersed in a solenoidal field which results in a cylindrically symmetric periodic field. A key advantage of this wiggler configuration is its capacity to handle very high beam currents with excellent focusing and transport properties. FEL configuration using the CHI wiggler design have the potential for high power, high frequency coherent generation in relatively compact systems. Analytic and simulated characteristics of the CHI wiggler are presented.

  3. Compendium of Total Ionizing Dose and Displacement Damage for Candidate Spacecraft Electronics for NASA

    Science.gov (United States)

    Cochran, Donna J.; Boutte, Alvin J.; Chen, Dakai; Pellish, Jonathan A.; Ladbury, Raymond L.; Casey, Megan C.; Campola, Michael J.; Wilcox, Edward P.; Obryan, Martha V.; LaBel, Kenneth A.; hide

    2012-01-01

    Vulnerability of a variety of candidate spacecraft electronics to total ionizing dose and displacement damage is studied. Devices tested include optoelectronics, digital, analog, linear, and hybrid devices.

  4. Polymers for electronic & photonic application

    CERN Document Server

    Wong, C P

    2013-01-01

    The most recent advances in the use of polymeric materials by the electronic industry can be found in Polymers for Electronic and Photonic Applications. This bookprovides in-depth coverage of photoresis for micro-lithography, microelectronic encapsulants and packaging, insulators, dielectrics for multichip packaging,electronic and photonic applications of polymeric materials, among many other topics. Intended for engineers and scientists who design, process, and manufacturemicroelectronic components, this book will also prove useful for hybrid and systems packaging managers who want to be info

  5. The Hybrids of Postmodernism

    Directory of Open Access Journals (Sweden)

    Dana BĂDULESCU

    2014-09-01

    Full Text Available Hybridization is a fundamental characteristic of postmodernism, included by Ihab Hassan in his “catena” of features. This paper looks into the hybrids of postmodernism, which are the result of migration, displacement and uprooting, the re-visitation of myths, folklore and legends, or projections of their author’s imagination. The hybrids used as examples here are drawn from several novels written by Salman Rushdie, especially The Satanic Verses, two short stories, one by Márquez and the other by Donald Barthelme, Borges’s Book of Imaginary Beings, Cărtărescu’s Encyclopaedia of Dragons and Michelle Cliff’s No Telephone to Heaven. Diverse as they may be, these hybrids emphasize a defining characteristic of postmodernism, which is its pluralism. I conclude that the hybrids of postmodernism are aesthetically or politically subversive. Besides, what makes them difficult to grasp is their unfixed and protean nature. They ask for high leaps of the imagination, a total suspension of disbelief and a complete surrender to the powerful seduction of imagination on the reader’s part.

  6. FISHy Analysis of Tetraploid Cotton Species

    Institute of Scientific and Technical Information of China (English)

    STELLY; David

    2008-01-01

    Fluorescent in situ hybridization(FISH) is an important technique in plant genome research,because it provides integrated information about DNA,chromosomes and genomes.Genomic in situ hybridization(GISH) is a modification of FISH that can be used to rapidly compare genome content,relatedness,organization and/or behavior.GISH results often provide insight into genome evolution and species relationships.The cotton genus Gossypium consists of about 50 species,including 5 AADD

  7. Ambient Electronics

    Science.gov (United States)

    Sekitani, Tsuyoshi; Someya, Takao

    2012-10-01

    We report the recent research progress and future prospects of flexible and printed electronics, focusing on molecular electronic material-based thin-film transistors, which are expected to usher in a new era of electronics.

  8. Ambipolar solution-processed hybrid perovskite phototransistors

    KAUST Repository

    Li, Feng

    2015-09-08

    Organolead halide perovskites have attracted substantial attention because of their excellent physical properties, which enable them to serve as the active material in emerging hybrid solid-state solar cells. Here we investigate the phototransistors based on hybrid perovskite films and provide direct evidence for their superior carrier transport property with ambipolar characteristics. The field-effect mobilities for triiodide perovskites at room temperature are measured as 0.18 (0.17) cm2 V−1 s−1 for holes (electrons), which increase to 1.24 (1.01) cm2 V−1 s−1 for mixed-halide perovskites. The photoresponsivity of our hybrid perovskite devices reaches 320 A W−1, which is among the largest values reported for phototransistors. Importantly, the phototransistors exhibit an ultrafast photoresponse speed of less than 10 μs. The solution-based process and excellent device performance strongly underscore hybrid perovskites as promising material candidates for photoelectronic applications.

  9. Brazilian hybrid electric fuel cell bus

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, P.E.V.; Carreira, E.S. [Coppe-Federal Univ. of Rio de Janeiro (Brazil). Hydrogen Lab.

    2010-07-01

    The first prototype of a hybrid electric fuel cell bus developed with Brazilian technology is unveiled. It is a 12 m urban-type, low-floor, air-conditioned bus that possesses three doors, air suspension, 29 seats and reversible wheelchair site. The bus body was built based on a double-deck type monoblock vehicle that is able to sustain important load on its roof. This allowed positioning of the type 3 hydrogen tanks and the low weight traction batteries on the roof of the vehicles without dynamic stabilization problems. A novel hybrid energy configuration was designed in such a way that the low-power (77 kWe) fuel cell works on steady-state operation mode, not responding directly to the traction motor load demand. The rate of kinetic energy regeneration upon breaking was optimized by the use of an electric hybrid system with predominance of batteries and also by utilizing supercapacitors. The electric-electronic devices and the security control softwares for the auxiliary and traction systems were developed in-house. The innovative hybrid-electric traction system configuration led to the possibility to decrease the fuel cell power, with positive impact on weight and system volume reduction, as well as to significantly decrease the hydrogen consumption. (orig.)

  10. Low arc drop hybrid mode thermionic converter

    Science.gov (United States)

    Shimada, K.

    1977-01-01

    The hybrid mode operation for the reduction of plasma drops is being investigated. This report discusses the results obtained from two molybdenum emitter converters. One converter had a molybdenum collector and the other a nickel collector. The molybdenum collector converter was operated in a hybrid mode (at an interelectrode distance of 1.7 mm) and produced a minimum barrier index of 1.96 eV at an emitter temperature of 1500 K. The arc drop was calculated to be 0.14 eV, using the published results for a molybdenum collector. On the other hand, the nickel collector converter was operated in a conventional ignited mode (at an interelectrode distance of 0.5 mm) and produced a minimum barrier index of 2.1 eV at an emitter temperature of 1700 K. It is tentatively concluded that a large-gap operation of the hybrid mode converter permits the diffusion of cesium ions to a distance in the order of one millimeter for an effective neutralization of electron space charge. By employing a low work function collector (1.55 eV) in a hybrid mode converter with an arc drop of 0.14 eV, it appears that a barrier index as low as 1.69 eV could be achieved.

  11. Research on Hybrid Vehicle Drivetrain

    Science.gov (United States)

    Xie, Zhongzhi

    Hybrid cars as a solution to energy saving, emission reduction measures, have received widespread attention. Motor drive system as an important part of the hybrid vehicles as an important object of study. Based on the hybrid electric vehicle powertrain control system for permanent magnet synchronous motor as the object of study. Can be applied to hybrid car compares the characteristics of traction motors, chose permanent magnet synchronous Motors as drive motors for hybrid vehicles. Building applications in hybrid cars in MATLAB/Simulink simulation model of permanent-magnet synchronous motor speed control system and analysis of simulation results.

  12. Electric field dependence of hybridized gap in InAs/GaSb quantum well system

    Science.gov (United States)

    Ruan, Jiufu; Wei, Xiangfei; Wang, Weiyang

    2017-02-01

    We demonstrate theoretically that exchange interaction induced by electron-hole scattering via Coulomb interaction can cause a hybridized gap in InAs/GaSb based type II and broken-gap quantum wells. The hybridized energy spectra are obtained analytically at the low temperature and long wave limits. An electric field depended hybridized gap about 4 meV opens at the anti-crossing points of the hybridized energy spectra, in accordance with experimental measurements. The hybridized gap varies linearly with the gate electric voltage due to the fact that the electric field can change the exchange self-energy by tuning the overlap of the wavefunctions and the Fermi energy. Our theoretical results can give a deep insight of the origin of the hybridized gap and provide a simple way to determine the value and the position of the hybridized gap in the presence of the gate electric voltage.

  13. Structural and Morphological Investigation for Water-Processed Graphene Oxide/Single-Walled Carbon Nanotubes Hybrids

    Science.gov (United States)

    Muda, M. R.; Ramli, M. M.; Mat Isa, S. S.; Halin, D. S. C.; Talip, L. F. A.; Mazelan, N. S.; Anhar, N. A. M.; Danial, N. A.

    2017-06-01

    New group of materials derived from hybridization of single walled carbon nanotubes (SWCNTs) and graphene oxide (GO) which resulting novel three dimensional (3D) materials generates an outstanding properties compared to corresponding SWCNTs and GO/Graphene. In this paper, we describe a simple approach using water processing method to develop integrated rGO/GO-SWCNT hybrids with different hybrid ratios. The hybrid ratios were varied into three divided ratio and the results were compared between pristine SWCNTs and GO in order to investigate the structural density and morphology of these carbonaceous materials. With an optimized ratio of rGO/GO-SWCNT, the hybrid shows a well-organized hybrid film structures with less defects density sites. The optimized mixture ratio emphasized the important of both rGO and SWCNTs in the hybrid structures. Morphological structural and defects density degrees were examined by Field Emission Scanning Electron Microscopy (FESEM) and Raman spectroscopy.

  14. Electron cooling

    Science.gov (United States)

    Meshkov, I.; Sidorin, A.

    2004-10-01

    The brief review of the most significant and interesting achievements in electron cooling method, which took place during last two years, is presented. The description of the electron cooling facilities-storage rings and traps being in operation or under development-is given. The applications of the electron cooling method are considered. The following modern fields of the method development are discussed: crystalline beam formation, expansion into middle and high energy electron cooling (the Fermilab Recycler Electron Cooler, the BNL cooler-recuperator, cooling with circulating electron beam, the GSI project), electron cooling in traps, antihydrogen generation, electron cooling of positrons (the LEPTA project).

  15. for hybrid dynamical systems

    Directory of Open Access Journals (Sweden)

    Wassim M. Haddad

    2001-01-01

    Full Text Available In this paper we develop a unified dynamical systems framework for a general class of systems possessing left-continuous flows; that is, left-continuous dynamical systems. These systems are shown to generalize virtually all existing notions of dynamical systems and include hybrid, impulsive, and switching dynamical systems as special cases. Furthermore, we generalize dissipativity, passivity, and nonexpansivity theory to left-continuous dynamical systems. Specifically, the classical concepts of system storage functions and supply rates are extended to left-continuous dynamical systems providing a generalized hybrid system energy interpretation in terms of stored energy, dissipated energy over the continuous-time dynamics, and dissipated energy over the resetting events. Finally, the generalized dissipativity notions are used to develop general stability criteria for feedback interconnections of left-continuous dynamical systems. These results generalize the positivity and small gain theorems to the case of left-continuous, hybrid, and impulsive dynamical systems.

  16. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Rönnkö, M.; Ravn, Anders Peter; Sere, K.

    2003-01-01

    In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time-derivatives in modell......In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time...... parallel composition. Moreover, as the strength of the action system formalism is the support for stepwise development by refinement, we investigate refinement involving a differential action. We show that, due to the predicate transformer semantics, standard action refinement techniques apply also...... to the differential action, thus, allowing stepwise development of hybrid systems Udgivelsesdato: JAN 1...

  17. Conditional Hybrid Nonclassicality

    Science.gov (United States)

    Agudelo, E.; Sperling, J.; Costanzo, L. S.; Bellini, M.; Zavatta, A.; Vogel, W.

    2017-09-01

    We derive and implement a general method to characterize the nonclassicality in compound discrete- and continuous-variable systems. For this purpose, we introduce the operational notion of conditional hybrid nonclassicality which relates to the ability to produce a nonclassical continuous-variable state by projecting onto a general superposition of discrete-variable subsystem. We discuss the importance of this form of quantumness in connection with interfaces for quantum communication. To verify the conditional hybrid nonclassicality, a matrix version of a nonclassicality quasiprobability is derived and its sampling approach is formulated. We experimentally generate an entangled, hybrid Schrödinger cat state, using a coherent photon-addition process acting on two temporal modes, and we directly sample its nonclassicality quasiprobability matrix. The introduced conditional quantum effects are certified with high statistical significance.

  18. Porosity in hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, D.W.; Beaucage, G.; Loy, D. [Sandia National Labs., Albuquerque, NM (United States)

    1995-12-31

    Multicomponent, or hybrid composites are emerging as precursors to porous materials. Sacrifice of an ephemeral phase can be used to generate porosity, the nature of which depends on precursor structure. Retention of an organic constituent, on the other hand, can add desirable toughness to an otherwise brittle ceramic. We use small-angle x-ray and neutron scattering to examine porosity in both simple and hybrid materials. We find that microphase separation controls porosity in almost all systems studied. Pore distributions are controlled by the detailed bonding within and between phases as well as the flexibility of polymeric constituents. Thus hybridization opens new regions of pore distributions not available in simple systems. We look at several sacrificial concepts and show that it is possible to generate multimodal pore size distributions due to the complicated phase structure in the precursor.

  19. Photoproduction of Hybrid Mesons

    CERN Document Server

    Barnes, T

    1998-01-01

    In this contribution I discuss prospects for photoproducing hybrid mesons at CEBAF, based on recent model results and experimental indications of possible hybrids. One excellent opportunity appears to be a search for the I=1, JPC=2+-, neutral "(b2)o" hybrid in (a2 pi)o through diffractive photoproduction. Other notable possibilities accessible through pi+ or pio exchange photoproduction are I=1, JPC=1-+, charged "pi1+" in f1 pi+, (b1 pi)+ and (rho pi)+; piJ(1770)+ in f2 pi+ and (b1 pi)+; pi(1800)+ in f0 pi+, f2 pi+, omega rho+ and (rho pi)+; a1 in f1 pi+ and f2 pi+; and omega in (rho pi)o, omega eta and (K1 K)o.

  20. Hybrid Photonic Integration on a Polymer Platform

    Directory of Open Access Journals (Sweden)

    Ziyang Zhang

    2015-09-01

    Full Text Available To fulfill the functionality demands from the fast developing optical networks, a hybrid integration approach allows for combining the advantages of various material platforms. We have established a polymer-based hybrid integration platform (polyboard, which provides flexible optical input/ouptut interfaces (I/Os that allow robust coupling of indium phosphide (InP-based active components, passive insertion of thin-film-based optical elements, and on-chip attachment of optical fibers. This work reviews the recent progress of our polyboard platform. On the fundamental level, multi-core waveguides and polymer/silicon nitride heterogeneous waveguides have been fabricated, broadening device design possibilities and enabling 3D photonic integration. Furthermore, 40-channel optical line terminals and compact, bi-directional optical network units have been developed as highly functional, low-cost devices for the wavelength division multiplexed passive optical network. On a larger scale, thermo-optic elements, thin-film elements and an InP gain chip have been integrated on the polyboard to realize a colorless, dual-polarization optical 90° hybrid as the frontend of a coherent receiver. For high-end applications, a wavelength tunable 100Gbaud transmitter module has been demonstrated, manifesting the joint contribution from the polyboard technology, high speed polymer electro-optic modulator, InP driver electronics and ceramic electronic interconnects.