WorldWideScience

Sample records for hybrid wireless sensor

  1. Existing PON Infrastructure Supported Hybrid Fiber-Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Yu, Xianbin; Zhao, Ying; Deng, Lei;

    2012-01-01

    We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals.......We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals....

  2. Hybrid wireless sensor network for rescue site monitoring after earthquake

    Science.gov (United States)

    Wang, Rui; Wang, Shuo; Tang, Chong; Zhao, Xiaoguang; Hu, Weijian; Tan, Min; Gao, Bowei

    2016-07-01

    This paper addresses the design of a low-cost, low-complexity, and rapidly deployable wireless sensor network (WSN) for rescue site monitoring after earthquakes. The system structure of the hybrid WSN is described. Specifically, the proposed hybrid WSN consists of two kinds of wireless nodes, i.e., the monitor node and the sensor node. Then the mechanism and the system configuration of the wireless nodes are detailed. A transmission control protocol (TCP)-based request-response scheme is proposed to allow several monitor nodes to communicate with the monitoring center. UDP-based image transmission algorithms with fast recovery have been developed to meet the requirements of in-time delivery of on-site monitor images. In addition, the monitor node contains a ZigBee module that used to communicate with the sensor nodes, which are designed with small dimensions to monitor the environment by sensing different physical properties in narrow spaces. By building a WSN using these wireless nodes, the monitoring center can display real-time monitor images of the monitoring area and visualize all collected sensor data on geographic information systems. In the end, field experiments were performed at the Training Base of Emergency Seismic Rescue Troops of China and the experimental results demonstrate the feasibility and effectiveness of the monitor system.

  3. A Hybrid Structure for Data Aggregation in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Hedieh Sajedi

    2014-01-01

    Full Text Available In recent years, wireless sensor networks have been used for various applications such as environmental monitoring, military and medical applications. A wireless sensor network uses a large number of sensor nodes that continuously collect and send data from a specific region to a base station. Data from sensors are collected from the study area in the common scenario of sensor networks. Afterward, sensed data is sent to the base station. However, neighboring sensors often lead to redundancy of data. Transmission of redundant data to the base station consumes energy and produces traffic, because process is run in a large network. Data aggregation was proposed in order to reduce redundancy in data transformation and traffic. The most popular communication protocol in this field is cluster based data aggregation. Clustering causes energy balance, but sometimes energy consumption is not efficient due to the long distance between cluster heads and base station. In another communication protocol, which is based on a tree construction, because of the short distance between the sensors, energy consumption is low. In this data aggregation approach, since each sensor node is considered as one of the vertices of a tree, the depth of tree is usually high. In this paper, an efficient hierarchical hybrid approach for data aggregation is presented. It reduces energy consumption based on clustering and minimum spanning tree. The benefit of combining clustering and tree structure is reducing the disadvantages of previous structures. The proposed method firstly employs clustering algorithm and then a minimum spanning tree is constructed based on cluster heads. Our proposed method was compared to LEACH which is a well-known data aggregation method in terms of energy consumption and the amount of energy remaining in each sensor network lifetime. Simulation results indicate that our proposed method is more efficient than LEACH algorithm considering energy

  4. Novel Hybrid Intrusion Detection System For Clustered Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Hichem Sedjelmaci

    2011-08-01

    Full Text Available Wireless sensor network (WSN is regularly deployed in unattended and hostile environments. The WSN isvulnerable to security threats and susceptible to physical capture. Thus, it is necessary to use effective mechanisms to protect the network. It is widely known, that the intrusion detection is one of the mostefficient security mechanisms to protect the network against malicious attacks or unauthorized access. In this paper, we propose a hybrid intrusion detection system for clustered WSN. Our intrusion framework uses a combination between the Anomaly Detection based on support vector machine (SVM and the Misuse Detection. Experiments results show that most of routing attacks can be detected with low falsealarm.

  5. Active Low Intrusion Hybrid Monitor for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Marlon Navia

    2015-09-01

    Full Text Available Several systems have been proposed to monitor wireless sensor networks (WSN. These systems may be active (causing a high degree of intrusion or passive (low observability inside the nodes. This paper presents the implementation of an active hybrid (hardware and software monitor with low intrusion. It is based on the addition to the sensor node of a monitor node (hardware part which, through a standard interface, is able to receive the monitoring information sent by a piece of software executed in the sensor node. The intrusion on time, code, and energy caused in the sensor nodes by the monitor is evaluated as a function of data size and the interface used. Then different interfaces, commonly available in sensor nodes, are evaluated: serial transmission (USART, serial peripheral interface (SPI, and parallel. The proposed hybrid monitor provides highly detailed information, barely disturbed by the measurement tool (interference, about the behavior of the WSN that may be used to evaluate many properties such as performance, dependability, security, etc. Monitor nodes are self-powered and may be removed after the monitoring campaign to be reused in other campaigns and/or WSNs. No other hardware-independent monitoring platforms with such low interference have been found in the literature.

  6. Active Low Intrusion Hybrid Monitor for Wireless Sensor Networks.

    Science.gov (United States)

    Navia, Marlon; Campelo, Jose C; Bonastre, Alberto; Ors, Rafael; Capella, Juan V; Serrano, Juan J

    2015-09-18

    Several systems have been proposed to monitor wireless sensor networks (WSN). These systems may be active (causing a high degree of intrusion) or passive (low observability inside the nodes). This paper presents the implementation of an active hybrid (hardware and software) monitor with low intrusion. It is based on the addition to the sensor node of a monitor node (hardware part) which, through a standard interface, is able to receive the monitoring information sent by a piece of software executed in the sensor node. The intrusion on time, code, and energy caused in the sensor nodes by the monitor is evaluated as a function of data size and the interface used. Then different interfaces, commonly available in sensor nodes, are evaluated: serial transmission (USART), serial peripheral interface (SPI), and parallel. The proposed hybrid monitor provides highly detailed information, barely disturbed by the measurement tool (interference), about the behavior of the WSN that may be used to evaluate many properties such as performance, dependability, security, etc. Monitor nodes are self-powered and may be removed after the monitoring campaign to be reused in other campaigns and/or WSNs. No other hardware-independent monitoring platforms with such low interference have been found in the literature.

  7. RH+: A Hybrid Localization Algorithm for Wireless Sensor Networks

    Science.gov (United States)

    Basaran, Can; Baydere, Sebnem; Kucuk, Gurhan

    Today, localization of nodes in Wireless Sensor Networks (WSNs) is a challenging problem. Especially, it is almost impossible to guarantee that one algorithm giving optimal results for one topology will give optimal results for any other random topology. In this study, we propose a centralized, range- and anchor-based, hybrid algorithm called RH+ that aims to combine the powerful features of two orthogonal techniques: Classical Multi-Dimensional Scaling (CMDS) and Particle Spring Optimization (PSO). As a result, we find that our hybrid approach gives a fast-converging solution which is resilient to range-errors and very robust to topology changes. Across all topologies we studied, the average estimation error is less than 0.5m. when the average node density is 10 and only 2.5% of the nodes are beacons.

  8. SIMULATION OF WIRELESS SENSOR NETWORK WITH HYBRID TOPOLOGY

    Directory of Open Access Journals (Sweden)

    J. Jaslin Deva Gifty

    2016-03-01

    Full Text Available The design of low rate Wireless Personal Area Network (WPAN by IEEE 802.15.4 standard has been developed to support lower data rates and low power consuming application. Zigbee Wireless Sensor Network (WSN works on the network and application layer in IEEE 802.15.4. Zigbee network can be configured in star, tree or mesh topology. The performance varies from topology to topology. The performance parameters such as network lifetime, energy consumption, throughput, delay in data delivery and sensor field coverage area varies depending on the network topology. In this paper, designing of hybrid topology by using two possible combinations such as star-tree and star-mesh is simulated to verify the communication reliability. This approach is to combine all the benefits of two network model. The parameters such as jitter, delay and throughput are measured for these scenarios. Further, MAC parameters impact such as beacon order (BO and super frame order (SO for low power consumption and high channel utilization, has been analysed for star, tree and mesh topology in beacon disable mode and beacon enable mode by varying CBR traffic loads.

  9. Mobility-aware Hybrid Synchronization for Wireless Sensor Network

    DEFF Research Database (Denmark)

    Dnyaneshwar, Mantri; Prasad, Neeli R.; Prasad, Ramjee

    2015-01-01

    Random mobility of node causes the frequent changes in the network dynamics causing the increased cost in terms of energy and bandwidth. It needs the additional efforts to synchronize the activities of nodes during data collection and transmission in Wireless Sensor Networks (WSNs). A key challenge...... in maintaining the effective data collection and transmission is to schedule and synchronize the activities of the nodes with the global clock. This paper proposes the Mobility-aware Hybrid Synchronization Algorithm (MHS) which works on the formation of cluster based on spanning tree mechanism (SPT). Nodes used...... for formation of the network have random mobility and heterogeneous in terms of energy with static sink. The nodes in the cluster and cluster heads in the network are synchronized with the notion of global time scale. In the initial stage, the algorithm establishes the hierarchical structure of the network...

  10. Bandwidth Efficient Hybrid Synchronization for Wireless Sensor Network

    DEFF Research Database (Denmark)

    Dnyaneshwar, Mantri; Prasad, Neeli R.; Prasad, Ramjee

    2015-01-01

    Data collection and transmission are the fundamental operations of Wireless Sensor Networks (WSNs). A key challenge in effective data collection and transmission is to schedule and synchronize the activities of the nodes with the global clock. This paper proposes the Bandwidth Efficient Hybrid...... Synchronization Data Aggregation Algorithm (BESDA) using spanning tree mechanism (SPT). It uses static sink and mobile nodes in the network. BESDA considers the synchronization of a local clock of node with global clock of the network. In the initial stage algorithm established the hierarchical structure...... in the network and then perform the pair-wise synchronization. With the mobility of node, the structure frequently changes causing an increase in energy consumption. To mitigate the problem BESDA aggregate data with the notion of a global timescale throughout the network and schedule based time-division multiple...

  11. A Comparative Analysis for Hybrid Routing Protocol for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ms. Manisha M. Magdum

    2015-04-01

    Full Text Available Wireless Sensor Networks (WSNs consist of smallnodes with sensing, computation and wireless communicationscapabilities. These sensor networks interconnect a several othernodes when established in large and this opens up severaltechnical challenges and immense application possibilities.These wireless sensor networks communicate using multi-hopwireless communications, regular ad hoc routing techniquescannot be directly applied to sensor networks domain due tothe limited processing power and the finite power available toeach sensor nodes hence recent advances in wireless sensornetworks have developed many protocols depending on theapplication and network architecture and are specificallydesigned for sensor networks where energy awareness is anessential consideration. This paper presents routingprotocols for sensor networks and compares the routingprotocols that are presently of increasing importance. In this paper, we propose Hybrid Routing Protocol whichcombines the merits of proactive and reactive approach andovercome their demerits.

  12. A Two-Phase Coverage-Enhancing Algorithm for Hybrid Wireless Sensor Networks.

    Science.gov (United States)

    Zhang, Qingguo; Fok, Mable P

    2017-01-09

    Providing field coverage is a key task in many sensor network applications. In certain scenarios, the sensor field may have coverage holes due to random initial deployment of sensors; thus, the desired level of coverage cannot be achieved. A hybrid wireless sensor network is a cost-effective solution to this problem, which is achieved by repositioning a portion of the mobile sensors in the network to meet the network coverage requirement. This paper investigates how to redeploy mobile sensor nodes to improve network coverage in hybrid wireless sensor networks. We propose a two-phase coverage-enhancing algorithm for hybrid wireless sensor networks. In phase one, we use a differential evolution algorithm to compute the candidate's target positions in the mobile sensor nodes that could potentially improve coverage. In the second phase, we use an optimization scheme on the candidate's target positions calculated from phase one to reduce the accumulated potential moving distance of mobile sensors, such that the exact mobile sensor nodes that need to be moved as well as their final target positions can be determined. Experimental results show that the proposed algorithm provided significant improvement in terms of area coverage rate, average moving distance, area coverage-distance rate and the number of moved mobile sensors, when compare with other approaches.

  13. Energy-Saving Traffic Scheduling in Hybrid Software Defined Wireless Rechargeable Sensor Networks.

    Science.gov (United States)

    Wei, Yunkai; Ma, Xiaohui; Yang, Ning; Chen, Yijin

    2017-09-15

    Software Defined Wireless Rechargeable Sensor Networks (SDWRSNs) are an inexorable trend for Wireless Sensor Networks (WSNs), including Wireless Rechargeable Sensor Network (WRSNs). However, the traditional network devices cannot be completely substituted in the short term. Hybrid SDWRSNs, where software defined devices and traditional devices coexist, will last for a long time. Hybrid SDWRSNs bring new challenges as well as opportunities for energy saving issues, which is still a key problem considering that the wireless chargers are also exhaustible, especially in some rigid environment out of the main supply. Numerous energy saving schemes for WSNs, or even some works for WRSNs, are no longer suitable for the new features of hybrid SDWRSNs. To solve this problem, this paper puts forward an Energy-saving Traffic Scheduling (ETS) algorithm. The ETS algorithm adequately considers the new characters in hybrid SDWRSNs, and takes advantage of the Software Defined Networking (SDN) controller's direct control ability on SDN nodes and indirect control ability on normal nodes. The simulation results show that, comparing with traditional Minimum Transmission Energy (MTE) protocol, ETS can substantially improve the energy efficiency in hybrid SDWRSNs for up to 20-40% while ensuring feasible data delay.

  14. A Faster Routing Scheme for Stationary Wireless Sensor Networks - A Hybrid Approach

    CERN Document Server

    Norman, Jasmine; Roja, P Prapoorna; 10.5121/ijasuc.2010.1101

    2010-01-01

    A wireless sensor network consists of light-weight, low power, small size sensor nodes. Routing in wireless sensor networks is a demanding task. This demand has led to a number of routing protocols which efficiently utilize the limited resources available at the sensor nodes. Most of these protocols are either based on single hop routing or multi hop routing and typically find the minimum energy path without addressing other issues such as time delay in delivering a packet, load balancing, and redundancy of data. Response time is very critical in environment monitoring sensor networks where typically the sensors are stationary and transmit data to a base station or a sink node. In this paper a faster load balancing routing protocol based on location with a hybrid approach is proposed.

  15. Simple hybrid wire-wireless fiber laser sensor by direct photonic generation of beat signal.

    Science.gov (United States)

    Liu, Shengchun; Gao, Liang; Yin, Zuowei; Shi, Yuechun; Zhang, Liang; Chen, Xiangfei; Cheng, Jianchun

    2011-04-20

    Based on direct photonic generation of a beat signal, a simple hybrid wire-wireless fiber laser sensor is proposed. In the sensor, an improved multilongitudinal modes fiber laser cavity is set up by only a fiber Bragg grating, a section of erbium-doped fiber, and a broadband reflector. A photodetector is used to detect the electrical beat signal. Next, the beat signal including the sensor information can access the wireless network through the wireless transmission. At last, a frequency spectrum analyzer is used to demodulate the sensing information. With this method, the long-distance real-time monitor of the fiber sensor can be realized. The proposed technique offers a simple and cheap way for sensing information of the fiber sensor to access the wireless sensor network. An experiment was implemented to measure the strain and the corresponding root mean square deviation is about -5.7 με at 916 MHz and -3.8 με at 1713 MHz after wireless transmission.

  16. Robot Positioning and Navigation Based on Hybrid Wireless Sensor Network

    Institute of Scientific and Technical Information of China (English)

    Shun-cai YAO; Jin-dong TAN; Hong-xia PAN

    2010-01-01

    Traditional sensor network and robot navigation are based an the map of detecting the fields available in advance.The optimal algorithms are developed to solve the energy saving,the shortest path problems,etc.However,in the practical encironment,there are many fields,whose map is difficult to get,and needs to be detected.In this paper a kind of ad-hoc navigation algorithm is explored,which is based on the hybrid sensor network without the prior map in advance.The navigation system is composed of static nodes and dynamic nodes.The static nodes monitor the occurrances of the events and broadcast them.In the system,a kind of algorithm is to locate the robot,which is based on cluster broadcasting.The dynamic nodes detect the adversary or dangerous fields and broadcast warning messages.The robot gets the message and follows ad-hoc routine to arrive where the events occur.In the whole process,energy saving has been taken into account.The algorithms,which are based on the hybrid sensor network,are given in this paper.The simulation and practical results are also available.

  17. Connectivity and Coverage in Hybrid Wireless Sensor Networks using Dynamic Random Geometric Graph Model

    Directory of Open Access Journals (Sweden)

    Jasmine Norman

    2011-10-01

    Full Text Available Random Geometric Graphs have been a very influential and well-studied model of large networks, such assensor networks, where the network nodes are represented by the vertices of the RGG, and the direct connectivity between nodes is represented by the edges. This assumes homogeneous wireless nodes with uniform transmission ranges. In real life, there exist heterogeneous wireless networks in which devices have dramatically different capabilities. The connectivity of a WSN is related to the positions of nodes, and those positions are heavily affected by the method of sensor deployment. As sensors may be spread in an arbitrary manner, one of the fundamental issues in a wireless sensor network is the coverage problem. In this paper, I study connectivity and coverage in hybrid WSN based on dynamic random geometric graph.

  18. A Game Theoretic Optimization Method for Energy Efficient Global Connectivity in Hybrid Wireless Sensor Networks.

    Science.gov (United States)

    Lee, JongHyup; Pak, Dohyun

    2016-08-29

    For practical deployment of wireless sensor networks (WSN), WSNs construct clusters, where a sensor node communicates with other nodes in its cluster, and a cluster head support connectivity between the sensor nodes and a sink node. In hybrid WSNs, cluster heads have cellular network interfaces for global connectivity. However, when WSNs are active and the load of cellular networks is high, the optimal assignment of cluster heads to base stations becomes critical. Therefore, in this paper, we propose a game theoretic model to find the optimal assignment of base stations for hybrid WSNs. Since the communication and energy cost is different according to cellular systems, we devise two game models for TDMA/FDMA and CDMA systems employing power prices to adapt to the varying efficiency of recent wireless technologies. The proposed model is defined on the assumptions of the ideal sensing field, but our evaluation shows that the proposed model is more adaptive and energy efficient than local selections.

  19. A Game Theoretic Optimization Method for Energy Efficient Global Connectivity in Hybrid Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    JongHyup Lee

    2016-08-01

    Full Text Available For practical deployment of wireless sensor networks (WSN, WSNs construct clusters, where a sensor node communicates with other nodes in its cluster, and a cluster head support connectivity between the sensor nodes and a sink node. In hybrid WSNs, cluster heads have cellular network interfaces for global connectivity. However, when WSNs are active and the load of cellular networks is high, the optimal assignment of cluster heads to base stations becomes critical. Therefore, in this paper, we propose a game theoretic model to find the optimal assignment of base stations for hybrid WSNs. Since the communication and energy cost is different according to cellular systems, we devise two game models for TDMA/FDMA and CDMA systems employing power prices to adapt to the varying efficiency of recent wireless technologies. The proposed model is defined on the assumptions of the ideal sensing field, but our evaluation shows that the proposed model is more adaptive and energy efficient than local selections.

  20. Localisation of Sensor Nodes with Hybrid Measurements in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Muhammad W. Khan

    2016-07-01

    Full Text Available Localisation in wireless networks faces challenges such as high levels of signal attenuation and unknown path-loss exponents, especially in urban environments. In response to these challenges, this paper proposes solutions to localisation problems in noisy environments. A new observation model for localisation of static nodes is developed based on hybrid measurements, namely angle of arrival and received signal strength data. An approach for localisation of sensor nodes is proposed as a weighted linear least squares algorithm. The unknown path-loss exponent associated with the received signal strength is estimated jointly with the coordinates of the sensor nodes via the generalised pattern search method. The algorithm’s performance validation is conducted both theoretically and by simulation. A theoretical mean square error expression is derived, followed by the derivation of the linear Cramer-Rao bound which serves as a benchmark for the proposed location estimators. Accurate results are demonstrated with 25%–30% improvement in estimation accuracy with a weighted linear least squares algorithm as compared to linear least squares solution.

  1. A Hybrid Time Synchronization Algorithm Based on Broadcast Sequencing for Wireless Sensor Networks

    Science.gov (United States)

    2014-09-01

    sequence per the flow charts detailed in Figures 43–45 located in Appendix A. The input 1 in Figure 12 is a recursive step from some of the...SYNCHRONIZATION ALGORITHM BASED ON BROADCAST SEQUENCING FOR WIRELESS SENSOR NETWORKS by Sung C. Park September 2014 Thesis Co-Advisors...REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE A HYBRID TIME SYNCHRONIZATION ALGORITHM BASED ON BROADCAST SEQUENCING FOR

  2. An Evolutionary Mobility Aware Multi-Objective Hybrid Routing Algorithm for Heterogeneous Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Kulkarni, Nandkumar P.; Prasad, Neeli R.; Prasad, Ramjee

    Researchers have faced numerous challenges while designing WSNs and protocols in many applications such as object tracking in military, detection of disastrous events, environment and health monitoring etc. Amongst all sustaining connectivity and capitalizing on the network lifetime is a serious...... deliberation. To tackle these two problems, Mobile Wireless Sensor Networks (MWSNs) is a better choice. In MWSN, Sensor nodes move freely to a target area without the need for any special infrastructure. Due to mobility, the routing process in MWSN has become more complicated as connections in the network can...... change dynamically. In this paper, the authors put forward an Evolutionary Mobility aware multi-objective hybrid Routing Protocol for heterogeneous wireless sensor networks (EMRP). EMRP uses two-level hierarchical clustering. EMRP selects the optimal path from source to sink using multiple metrics...

  3. Rotating-Disk-Based Hybridized Electromagnetic-Triboelectric Nanogenerator for Sustainably Powering Wireless Traffic Volume Sensors.

    Science.gov (United States)

    Zhang, Binbin; Chen, Jun; Jin, Long; Deng, Weili; Zhang, Lei; Zhang, Haitao; Zhu, Minhao; Yang, Weiqing; Wang, Zhong Lin

    2016-06-28

    Wireless traffic volume detectors play a critical role for measuring the traffic-flow in a real-time for current Intelligent Traffic System. However, as a battery-operated electronic device, regularly replacing battery remains a great challenge, especially in the remote area and wide distribution. Here, we report a self-powered active wireless traffic volume sensor by using a rotating-disk-based hybridized nanogenerator of triboelectric nanogenerator and electromagnetic generator as the sustainable power source. Operated at a rotating rate of 1000 rpm, the device delivered an output power of 17.5 mW, corresponding to a volume power density of 55.7 W/m(3) (Pd = P/V, see Supporting Information for detailed calculation) at a loading resistance of 700 Ω. The hybridized nanogenerator was demonstrated to effectively harvest energy from wind generated by a moving vehicle through the tunnel. And the delivered power is capable of triggering a counter via a wireless transmitter for real-time monitoring the traffic volume in the tunnel. This study further expands the applications of triboelectric nanogenerators for high-performance ambient mechanical energy harvesting and as sustainable power sources for driving wireless traffic volume sensors.

  4. Hybrid energy storage system for wireless sensor node powered by aircraft specific thermoelectric energy harvesting

    Science.gov (United States)

    Thangaraj, K.; Elefsiniotis, A.; Aslam, S.; Becker, Th.; Schmid, U.; Lees, J.; Featherston, C. A.; Pullin, R.

    2013-05-01

    This paper describes an approach for efficiently storing the energy harvested from a thermoelectric module for powering autonomous wireless sensor nodes for aeronautical health monitoring applications. A representative temperature difference was created across a thermo electric generator (TEG) by attaching a thermal mass and a cavity containing a phase change material to one side, and a heat source (to represent the aircraft fuselage) to the other. Batteries and supercapacitors are popular choices of storage device, but neither represents the ideal solution; supercapacitors have a lower energy density than batteries and batteries have lower power density than supercapacitors. When using only a battery for storage, the runtime of a typical sensor node is typically reduced by internal impedance, high resistance and other internal losses. Supercapacitors may overcome some of these problems, but generally do not provide sufficient long-term energy to allow advanced health monitoring applications to operate over extended periods. A hybrid energy storage unit can provide both energy and power density to the wireless sensor node simultaneously. Techniques such as acoustic-ultrasonic, acoustic-emission, strain, crack wire sensor and window wireless shading require storage approaches that can provide immediate energy on demand, usually in short, high intensity bursts, and that can be sustained over long periods of time. This application requirement is considered as a significant constraint when working with battery-only and supercapacitor-only solutions and they should be able to store up-to 40-50J of energy.

  5. A Hybrid Data Compression Scheme for Power Reduction in Wireless Sensors for IoT.

    Science.gov (United States)

    Deepu, Chacko John; Heng, Chun-Huat; Lian, Yong

    2017-04-01

    This paper presents a novel data compression and transmission scheme for power reduction in Internet-of-Things (IoT) enabled wireless sensors. In the proposed scheme, data is compressed with both lossy and lossless techniques, so as to enable hybrid transmission mode, support adaptive data rate selection and save power in wireless transmission. Applying the method to electrocardiogram (ECG), the data is first compressed using a lossy compression technique with a high compression ratio (CR). The residual error between the original data and the decompressed lossy data is preserved using entropy coding, enabling a lossless restoration of the original data when required. Average CR of 2.1 × and 7.8 × were achieved for lossless and lossy compression respectively with MIT/BIH database. The power reduction is demonstrated using a Bluetooth transceiver and is found to be reduced to 18% for lossy and 53% for lossless transmission respectively. Options for hybrid transmission mode, adaptive rate selection and system level power reduction make the proposed scheme attractive for IoT wireless sensors in healthcare applications.

  6. Hybrid Control of Long-Endurance Aerial Robotic Vehicles for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Deok-Jin Lee

    2011-06-01

    Full Text Available This paper presents an effective hybrid control approach for building stable wireless sensor networks between heterogeneous unmanned vehicles using long‐ endurance aerial robotic vehicles. For optimal deployment of the aerial vehicles in communication networks, a gradient climbing based self‐estimating control algorithm is utilized to locate the aerial platforms to maintain maximum communication throughputs between distributed multiple nodes. The autonomous aerial robots, which function as communication relay nodes, extract and harvest thermal energy from the atmospheric environment to improve their flight endurance within specified communication coverage areas. The rapidly‐deployable sensor networks with the high‐endurance aerial vehicles can be used for various application areas including environment monitoring, surveillance, tracking, and decision‐making support. Flight test and simulation studies are conducted to evaluate the effectiveness of the proposed hybrid control technique for robust communication networks.

  7. Hybrid Binary Exponential Back-Off Mechanism for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Arshad Mohammed

    2013-06-01

    Full Text Available Many mechanisms to improve the performance have been proposed in the IEEE 802.15.4 Wireless sensor networks area, due to its high influence in the modern day world. Most of them have improved the performance of the network compared to the standard CSMA/CA backoff method. But still there are improvements to almost every method proposed. In this paper, we have proposed a hybrid binary exponential backoff (HBEB, where we have used two mechanisms to effectively increase the performance, when there are moderate numbers of nodes. The performance analysis using markov chain analysis has been given in this paper along with simulation results for the proposed method.

  8. Hybrid ARQ Scheme with Autonomous Retransmission for Multicasting in Wireless Sensor Networks

    Science.gov (United States)

    Jung, Young-Ho; Choi, Jihoon

    2017-01-01

    A new hybrid automatic repeat request (HARQ) scheme for multicast service for wireless sensor networks is proposed in this study. In the proposed algorithm, the HARQ operation is combined with an autonomous retransmission method that ensure a data packet is transmitted irrespective of whether or not the packet is successfully decoded at the receivers. The optimal number of autonomous retransmissions is determined to ensure maximum spectral efficiency, and a practical method that adjusts the number of autonomous retransmissions for realistic conditions is developed. Simulation results show that the proposed method achieves higher spectral efficiency than existing HARQ techniques. PMID:28245604

  9. Hierarchical Wireless Multimedia Sensor Networks for Collaborative Hybrid Semi-Supervised Classifier Learning

    Directory of Open Access Journals (Sweden)

    Liang Ding

    2007-11-01

    Full Text Available Wireless multimedia sensor networks (WMSN have recently emerged as one ofthe most important technologies, driven by the powerful multimedia signal acquisition andprocessing abilities. Target classification is an important research issue addressed in WMSN,which has strict requirement in robustness, quickness and accuracy. This paper proposes acollaborative semi-supervised classifier learning algorithm to achieve durative onlinelearning for support vector machine (SVM based robust target classification. The proposedalgorithm incrementally carries out the semi-supervised classifier learning process inhierarchical WMSN, with the collaboration of multiple sensor nodes in a hybrid computingparadigm. For decreasing the energy consumption and improving the performance, somemetrics are introduced to evaluate the effectiveness of the samples in specific sensor nodes,and a sensor node selection strategy is also proposed to reduce the impact of inevitablemissing detection and false detection. With the ant optimization routing, the learningprocess is implemented with the selected sensor nodes, which can decrease the energyconsumption. Experimental results demonstrate that the collaborative hybrid semi-supervised classifier learning algorithm can effectively implement target classification inhierarchical WMSN. It has outstanding performance in terms of energy efficiency and timecost, which verifies the effectiveness of the sensor nodes selection and ant optimizationrouting.

  10. H-MAC: A Hybrid MAC Protocol for Wireless Sensor Networks

    CERN Document Server

    Mehta, S; 10.5121/ijcnc.2010.2208

    2010-01-01

    In this paper, we propose a hybrid medium access control protocol (H-MAC) for wireless sensor networks. It is based on the IEEE 802.11's power saving mechanism (PSM) and slotted aloha, and utilizes multiple slots dynamically to improve performance. Existing MAC protocols for sensor networks reduce energy consumptions by introducing variation in an active/sleep mechanism. But they may not provide energy efficiency in varying traffic conditions as well as they did not address Quality of Service (QoS) issues. H-MAC, the propose MAC protocol maintains energy efficiency as well as QoS issues like latency, throughput, and channel utilization. Our numerical results show that H-MAC has significant improvements in QoS parameters than the existing MAC protocols for sensor networks while consuming comparable amount of energy.

  11. The Proposal Of Hybrid Intrusion Detection For Defence Of Sync Flood Attack In Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Ruchi Bhatnagar

    2012-05-01

    Full Text Available Data security is a huge responsibility for sensor network as there are various ways in which security can be breached, enabling hackers to access sensitive data. Threats to wireless sensor networks are numerous and potentially devastating. Security issues ranging from session hijacking to Denial of Service (DOS can plague a WSN. To aid in the defense and detection of these potential threats, WSN employ a security solution that includes an intrusion detection system (IDS. Different neural methods have been proposed in recent years for the development of intrusion detection system. In this paper, we surveyeddenial of service attacks that disseminate the WSN such a way that it temporarily paralyses a network and proposed a hybrid Intrusion Detection approach based on stream flow and session state transition analysis that monitor and analyze stream flow of data, identify abnormal network activity, detect policy violations against sync flood attack.

  12. Balancing energy consumption with hybrid clustering and routing strategy in wireless sensor networks.

    Science.gov (United States)

    Xu, Zhezhuang; Chen, Liquan; Liu, Ting; Cao, Lianyang; Chen, Cailian

    2015-10-20

    Multi-hop data collection in wireless sensor networks (WSNs) is a challenge issue due to the limited energy resource and transmission range of wireless sensors. The hybrid clustering and routing (HCR) strategy has provided an effective solution, which can generate a connected and efficient cluster-based topology for multi-hop data collection in WSNs. However, it suffers from imbalanced energy consumption, which results in the poor performance of the network lifetime. In this paper, we evaluate the energy consumption of HCR and discover an important result: the imbalanced energy consumption generally appears in gradient k = 1, i.e., the nodes that can communicate with the sink directly. Based on this observation, we propose a new protocol called HCR-1, which includes the adaptive relay selection and tunable cost functions to balance the energy consumption. The guideline of setting the parameters in HCR-1 is provided based on simulations. The analytical and numerical results prove that, with minor modification of the topology in Sensors 2015, 15 26584 gradient k = 1, the HCR-1 protocol effectively balances the energy consumption and prolongs the network lifetime.

  13. A Hybrid Optimized Weighted Minimum Spanning Tree for the Shortest Intrapath Selection in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Matheswaran Saravanan

    2014-01-01

    Full Text Available Wireless sensor network (WSN consists of sensor nodes that need energy efficient routing techniques as they have limited battery power, computing, and storage resources. WSN routing protocols should enable reliable multihop communication with energy constraints. Clustering is an effective way to reduce overheads and when this is aided by effective resource allocation, it results in reduced energy consumption. In this work, a novel hybrid evolutionary algorithm called Bee Algorithm-Simulated Annealing Weighted Minimal Spanning Tree (BASA-WMST routing is proposed in which randomly deployed sensor nodes are split into the best possible number of independent clusters with cluster head and optimal route. The former gathers data from sensors belonging to the cluster, forwarding them to the sink. The shortest intrapath selection for the cluster is selected using Weighted Minimum Spanning Tree (WMST. The proposed algorithm computes the distance-based Minimum Spanning Tree (MST of the weighted graph for the multihop network. The weights are dynamically changed based on the energy level of each sensor during route selection and optimized using the proposed bee algorithm simulated annealing algorithm.

  14. Efficient MAC Protocol for Hybrid Wireless Network with Heterogeneous Sensor Nodes

    Directory of Open Access Journals (Sweden)

    Md. Nasre Alam

    2016-01-01

    Full Text Available Although several Directional Medium Access Control (DMAC protocols have been designed for use with homogeneous networks, it can take a substantial amount of time to change sensor nodes that are equipped with an omnidirectional antenna for sensor nodes with a directional antenna. Thus, we require a novel MAC protocol for use with an intermediate wireless network that consists of heterogeneous sensor nodes equipped with either an omnidirectional antenna or a directional antenna. The MAC protocols that have been designed for use in homogeneous networks are not suitable for use in a hybrid network due to deaf, hidden, and exposed nodes. Therefore, we propose a MAC protocol that exploits the characteristics of a directional antenna and can also work efficiently with omnidirectional nodes in a hybrid network. In order to address the deaf, hidden, and exposed node problems, we define RTS/CTS for the neighbor (RTSN/CTSN and Neighbor Information (NIP packets. The performance of the proposed MAC protocol is evaluated through a numerical analysis using a Markov model. In addition, the analytical results of the MAC protocol are verified through an OPNET simulation.

  15. An energy efficient hybrid interference-resilient frame fragmentation for wireless sensor networks

    KAUST Repository

    Meer, Ammar M.

    2015-08-30

    Frame fragmentation into small blocks with dedicated error detection codes per block can reduce the unnecessary retransmission of the correctly received blocks. However, the optimal block size varies based on the wireless channel conditions. Further, blocks within a single frame may have different optimal sizes based on variations in interference patterns. This paper proposes a hybrid interference-resilient frame fragmentation (Hi-Frag) link-layer scheme for wireless sensor networks. It effectively addresses the challenges associated with dynamic partitioning of blocks while accounting for the observed error patterns. Hi-Frag is the first work to introduce an adaptive frame fragmentation scheme with hybrid block sizing, implemented and evaluated on a real WSN testbed. Hi-Frag shows substantial enhancements over fixed-size partial packet recovery protocols, achieving up to 2.5× improvement in throughput when the channel condition is noisy, while reducing network delays by up to 14% of the observed delay. On average, Hi-Frag shows 35% gain in throughput compared to static fragmentation approaches across all channel conditions used in our experiments. Also, Hi-Frag lowers the energy consumed per useful bit by 66% on average compared to conventional protocols, which increases the energy efficiency.

  16. A Hybrid Stochastic Approach for Self-Location of Wireless Sensors in Indoor Environments

    Directory of Open Access Journals (Sweden)

    Alejandro Canovas

    2009-05-01

    Full Text Available Indoor location systems, especially those using wireless sensor networks, are used in many application areas. While the need for these systems is widely proven, there is a clear lack of accuracy. Many of the implemented applications have high errors in their location estimation because of the issues arising in the indoor environment. Two different approaches had been proposed using WLAN location systems: on the one hand, the so-called deductive methods take into account the physical properties of signal propagation. These systems require a propagation model, an environment map, and the position of the radio-stations. On the other hand, the so-called inductive methods require a previous training phase where the system learns the received signal strength (RSS in each location. This phase can be very time consuming. This paper proposes a new stochastic approach which is based on a combination of deductive and inductive methods whereby wireless sensors could determine their positions using WLAN technology inside a floor of a building. Our goal is to reduce the training phase in an indoor environment, but, without an loss of precision. Finally, we compare the measurements taken using our proposed method in a real environment with the measurements taken by other developed systems. Comparisons between the proposed system and other hybrid methods are also provided.

  17. Cost analysis of hybrid adaptive routing protocol for heterogeneous wireless sensor network

    Indian Academy of Sciences (India)

    NONITA SHARMA; AJAY K SHARMA

    2016-03-01

    This study aims to explore the impact of heterogeneity on a hybrid algorithm called Multi Adaptive Filter Algorithm by constructing series of experiments. Here, the simulations were made between ‘Total Energy Spent’ and ‘Number of Sources’ considering temporal correlation. The results were drawn from the trace information generated using ‘Monte Carlo’ simulation methods. After keen analysis, the results show that different levels of heterogeneity are best suited for correlated event detections. Moreover, based on the conclusions drawn,it can be safely inferred that n-level heterogeneity reduces the total energy spent close to 60%. Further, cost analysis recommends that adding progressive nodes preserves the cost factor in the bracket of 230–280$/Joule. Thenovel approach can immensely help the future solution providers to overcome the battery limitations of wireless sensor networks. This study provides insights into designing heterogeneous wireless sensor networks and aims atproviding the cost-benefit analysis that can be used in selecting the critical parameters of the network.

  18. k-CONNECTED HYBRID RELAY NODE PLACEMENT IN WIRELESS SENSOR NETWORK FOR RESTORING CONNECTIVITY

    Directory of Open Access Journals (Sweden)

    Vijayvignesh Selvaraj

    2014-06-01

    Full Text Available Wireless Sensor Network (WSN consists of a number of sensor nodes for monitoring the environment. Scenario like floods, volcanic eruptions, earthquakes, tsunamis, avalanches, hailstorms and blizzards causes the sensor nodes to be damaged. In such worst case scenario, the deployed nodes in the monitoring area may split up into several segments. As a result sensor nodes in the network cannot communicate with each other due to partitions. Our algorithm investigates a strategy for restoring such kind of damage through either placement of Relay Nodes (RN’s or repositioning the existing nodes in the network. Unlike traditional schemes like minimum spanning tree, our proposed approach generates a different topology called as spider web. In this approach, both stationary and mobile relay nodes are used. Thus we are making our topology as a hybrid one. Though the numbers of relay nodes are increased, the robust connectivity and the balanced traffic load can be ensured. The validation of the proposed approach has been simulated and verified by QualNet Developer 5.0.2.

  19. A Hybrid Adaptive Routing Algorithm for Event-Driven Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Antonio A. F. Loureiro

    2009-09-01

    Full Text Available Routing is a basic function in wireless sensor networks (WSNs. For these networks, routing algorithms depend on the characteristics of the applications and, consequently, there is no self-contained algorithm suitable for every case. In some scenarios, the network behavior (traffic load may vary a lot, such as an event-driven application, favoring different algorithms at different instants. This work presents a hybrid and adaptive algorithm for routing in WSNs, called Multi-MAF, that adapts its behavior autonomously in response to the variation of network conditions. In particular, the proposed algorithm applies both reactive and proactive strategies for routing infrastructure creation, and uses an event-detection estimation model to change between the strategies and save energy. To show the advantages of the proposed approach, it is evaluated through simulations. Comparisons with independent reactive and proactive algorithms show improvements on energy consumption.

  20. A hybrid adaptive routing algorithm for event-driven wireless sensor networks.

    Science.gov (United States)

    Figueiredo, Carlos M S; Nakamura, Eduardo F; Loureiro, Antonio A F

    2009-01-01

    Routing is a basic function in wireless sensor networks (WSNs). For these networks, routing algorithms depend on the characteristics of the applications and, consequently, there is no self-contained algorithm suitable for every case. In some scenarios, the network behavior (traffic load) may vary a lot, such as an event-driven application, favoring different algorithms at different instants. This work presents a hybrid and adaptive algorithm for routing in WSNs, called Multi-MAF, that adapts its behavior autonomously in response to the variation of network conditions. In particular, the proposed algorithm applies both reactive and proactive strategies for routing infrastructure creation, and uses an event-detection estimation model to change between the strategies and save energy. To show the advantages of the proposed approach, it is evaluated through simulations. Comparisons with independent reactive and proactive algorithms show improvements on energy consumption.

  1. Hybrid Swarm Intelligence Energy Efficient Clustered Routing Algorithm for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rajeev Kumar

    2016-01-01

    Full Text Available Currently, wireless sensor networks (WSNs are used in many applications, namely, environment monitoring, disaster management, industrial automation, and medical electronics. Sensor nodes carry many limitations like low battery life, small memory space, and limited computing capability. To create a wireless sensor network more energy efficient, swarm intelligence technique has been applied to resolve many optimization issues in WSNs. In many existing clustering techniques an artificial bee colony (ABC algorithm is utilized to collect information from the field periodically. Nevertheless, in the event based applications, an ant colony optimization (ACO is a good solution to enhance the network lifespan. In this paper, we combine both algorithms (i.e., ABC and ACO and propose a new hybrid ABCACO algorithm to solve a Nondeterministic Polynomial (NP hard and finite problem of WSNs. ABCACO algorithm is divided into three main parts: (i selection of optimal number of subregions and further subregion parts, (ii cluster head selection using ABC algorithm, and (iii efficient data transmission using ACO algorithm. We use a hierarchical clustering technique for data transmission; the data is transmitted from member nodes to the subcluster heads and then from subcluster heads to the elected cluster heads based on some threshold value. Cluster heads use an ACO algorithm to discover the best route for data transmission to the base station (BS. The proposed approach is very useful in designing the framework for forest fire detection and monitoring. The simulation results show that the ABCACO algorithm enhances the stability period by 60% and also improves the goodput by 31% against LEACH and WSNCABC, respectively.

  2. Hybrid swarm intelligence optimization approach for optimal data storage position identification in wireless sensor networks.

    Science.gov (United States)

    Mohanasundaram, Ranganathan; Periasamy, Pappampalayam Sanmugam

    2015-01-01

    The current high profile debate with regard to data storage and its growth have become strategic task in the world of networking. It mainly depends on the sensor nodes called producers, base stations, and also the consumers (users and sensor nodes) to retrieve and use the data. The main concern dealt here is to find an optimal data storage position in wireless sensor networks. The works that have been carried out earlier did not utilize swarm intelligence based optimization approaches to find the optimal data storage positions. To achieve this goal, an efficient swam intelligence approach is used to choose suitable positions for a storage node. Thus, hybrid particle swarm optimization algorithm has been used to find the suitable positions for storage nodes while the total energy cost of data transmission is minimized. Clustering-based distributed data storage is utilized to solve clustering problem using fuzzy-C-means algorithm. This research work also considers the data rates and locations of multiple producers and consumers to find optimal data storage positions. The algorithm is implemented in a network simulator and the experimental results show that the proposed clustering and swarm intelligence based ODS strategy is more effective than the earlier approaches.

  3. Hybrid Swarm Intelligence Optimization Approach for Optimal Data Storage Position Identification in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ranganathan Mohanasundaram

    2015-01-01

    Full Text Available The current high profile debate with regard to data storage and its growth have become strategic task in the world of networking. It mainly depends on the sensor nodes called producers, base stations, and also the consumers (users and sensor nodes to retrieve and use the data. The main concern dealt here is to find an optimal data storage position in wireless sensor networks. The works that have been carried out earlier did not utilize swarm intelligence based optimization approaches to find the optimal data storage positions. To achieve this goal, an efficient swam intelligence approach is used to choose suitable positions for a storage node. Thus, hybrid particle swarm optimization algorithm has been used to find the suitable positions for storage nodes while the total energy cost of data transmission is minimized. Clustering-based distributed data storage is utilized to solve clustering problem using fuzzy-C-means algorithm. This research work also considers the data rates and locations of multiple producers and consumers to find optimal data storage positions. The algorithm is implemented in a network simulator and the experimental results show that the proposed clustering and swarm intelligence based ODS strategy is more effective than the earlier approaches.

  4. A hybrid MAC protocol design for energy-efficient very-high-throughput millimeter wave, wireless sensor communication networks

    Science.gov (United States)

    Jian, Wei; Estevez, Claudio; Chowdhury, Arshad; Jia, Zhensheng; Wang, Jianxin; Yu, Jianguo; Chang, Gee-Kung

    2010-12-01

    This paper presents an energy-efficient Medium Access Control (MAC) protocol for very-high-throughput millimeter-wave (mm-wave) wireless sensor communication networks (VHT-MSCNs) based on hybrid multiple access techniques of frequency division multiplexing access (FDMA) and time division multiplexing access (TDMA). An energy-efficient Superframe for wireless sensor communication network employing directional mm-wave wireless access technologies is proposed for systems that require very high throughput, such as high definition video signals, for sensing, processing, transmitting, and actuating functions. Energy consumption modeling for each network element and comparisons among various multi-access technologies in term of power and MAC layer operations are investigated for evaluating the energy-efficient improvement of proposed MAC protocol.

  5. WRHT: A Hybrid Technique for Detection of Wormhole Attack in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rupinder Singh

    2016-01-01

    Full Text Available Wormhole attack is a challenging security threat to wireless sensor networks which results in disrupting most of the routing protocols as this attack can be triggered in different modes. In this paper, WRHT, a wormhole resistant hybrid technique, is proposed, which can detect the presence of wormhole attack in a more optimistic manner than earlier techniques. WRHT is based on the concept of watchdog and Delphi schemes and ensures that the wormhole will not be left untreated in the sensor network. WRHT makes use of the dual wormhole detection mechanism of calculating probability factor time delay probability and packet loss probability of the established path in order to find the value of wormhole presence probability. The nodes in the path are given different ranking and subsequently colors according to their behavior. The most striking feature of WRHT consists of its capacity to defend against almost all categories of wormhole attacks without depending on any required additional hardware such as global positioning system, timing information or synchronized clocks, and traditional cryptographic schemes demanding high computational needs. The experimental results clearly indicate that the proposed technique has significant improvement over the existing wormhole attack detection techniques.

  6. Wireless sensor platform

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Pooran C.; Killough, Stephen M.; Kuruganti, Phani Teja

    2017-08-08

    A wireless sensor platform and methods of manufacture are provided. The platform involves providing a plurality of wireless sensors, where each of the sensors is fabricated on flexible substrates using printing techniques and low temperature curing. Each of the sensors can include planar sensor elements and planar antennas defined using the printing and curing. Further, each of the sensors can include a communications system configured to encode the data from the sensors into a spread spectrum code sequence that is transmitted to a central computer(s) for use in monitoring an area associated with the sensors.

  7. An Integrated Hybrid Energy Harvester for Autonomous Wireless Sensor Network Nodes

    Directory of Open Access Journals (Sweden)

    Mukter Zaman

    2014-01-01

    Full Text Available Profiling environmental parameter using a large number of spatially distributed wireless sensor network (WSN NODEs is an extensive illustration of advanced modern technologies, but high power requirement for WSN NODEs limits the widespread deployment of these technologies. Currently, WSN NODEs are extensively powered up using batteries, but the battery has limitation of lifetime, power density, and environmental concerns. To overcome this issue, energy harvester (EH is developed and presented in this paper. Solar-based EH has been identified as the most viable source of energy to be harvested for autonomous WSN NODEs. Besides, a novel chemical-based EH is reported as the potential secondary source for harvesting energy because of its uninterrupted availability. By integrating both solar-based EH and chemical-based EH, a hybrid energy harvester (HEH is developed to power up WSN NODEs. Experimental results from the real-time deployment shows that, besides supporting the daily operation of WSN NODE and Router, the developed HEH is capable of producing a surplus of 971 mA·hr equivalent energy to be stored inside the storage for NODE and 528.24 mA·hr equivalent energy for Router, which is significantly enough for perpetual operation of autonomous WSN NODEs used in environmental parameter profiling.

  8. Hybrid Recovery Strategy Based on Random Terrain in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Xiaoding Wang

    2017-01-01

    Full Text Available Providing successful data collection and aggregation is a primary goal for a broad spectrum of critical applications of wireless sensor networks. Unfortunately, the problem of connectivity loss, which may occur when a network suffers from natural disasters or human sabotages, may cause failure in data aggregation. To tackle this issue, plenty of strategies that deploy relay devices on target areas to restore connectivity have been devised. However, all of them assume that either the landforms of target areas are flat or there are sufficient relay devices. In real scenarios, such assumptions are not realistic. In this paper, we propose a hybrid recovery strategy based on random terrain (simply, HRSRT that takes both realistic terrain influences and quantitative limitations of relay devices into consideration. HRSRT is proved to accomplish the biconnectivity restoration and meanwhile minimize the energy cost for data collection and aggregation. In addition, both of complexity and approximation ratio of HRSRT are explored. The simulation results show that HRSRT performs well in terms of overall/maximum energy cost.

  9. Wireless ferroelectric resonating sensor.

    Science.gov (United States)

    Viikari, Ville; Seppa, Heikki; Mattila, Tomi; Alastalo, Ari

    2010-04-01

    This paper presents a passive wireless resonating sensor that is based on a ferroelectric varactor. The sensor replies with its data at an intermodulation frequency when a reader device illuminates it at 2 closely located frequencies. The paper derives a theoretical equation for the response of such a sensor, verifies the theory by simulations, and demonstrates a temperature sensor based on a ferroelectric varactor.

  10. An energy-efficient and secure hybrid algorithm for wireless sensor networks using a mobile data collector

    Science.gov (United States)

    Dayananda, Karanam Ravichandran; Straub, Jeremy

    2017-05-01

    This paper proposes a new hybrid algorithm for security, which incorporates both distributed and hierarchal approaches. It uses a mobile data collector (MDC) to collect information in order to save energy of sensor nodes in a wireless sensor network (WSN) as, in most networks, these sensor nodes have limited energy. Wireless sensor networks are prone to security problems because, among other things, it is possible to use a rogue sensor node to eavesdrop on or alter the information being transmitted. To prevent this, this paper introduces a security algorithm for MDC-based WSNs. A key use of this algorithm is to protect the confidentiality of the information sent by the sensor nodes. The sensor nodes are deployed in a random fashion and form group structures called clusters. Each cluster has a cluster head. The cluster head collects data from the other nodes using the time-division multiple access protocol. The sensor nodes send their data to the cluster head for transmission to the base station node for further processing. The MDC acts as an intermediate node between the cluster head and base station. The MDC, using its dynamic acyclic graph path, collects the data from the cluster head and sends it to base station. This approach is useful for applications including warfighting, intelligent building and medicine. To assess the proposed system, the paper presents a comparison of its performance with other approaches and algorithms that can be used for similar purposes.

  11. Fuzzy-Neural Petri Net Distributed Control System Using Hybrid Wireless Sensor Network and CAN Fieldbus

    Directory of Open Access Journals (Sweden)

    Ali A. Abed

    2016-06-01

    Full Text Available The reluctance of industry to allow wireless paths to be incorporated in process control loops has limited the potential applications and benefits of wireless systems. The challenge is to maintain the performance of a control loop, which is degraded by slow data rates and delays in a wireless path. To overcome these challenges, this paper presents an application–level design for a wireless sensor/actuator network (WSAN based on the “automated architecture”. The resulting WSAN system is used in the developing of a wireless distributed control system (WDCS. The implementation of our wireless system involves the building of a wireless sensor network (WSN for data acquisition and controller area network (CAN protocol fieldbus system for plant actuation. The sensor/actuator system is controlled by an intelligent digital control algorithm that involves a controller developed with velocity PID-like Fuzzy Neural Petri Net (FNPN system. This control system satisfies two important real-time requirements: bumpless transfer and anti-windup, which are needed when manual/auto operating aspect is adopted in the system. The intelligent controller is learned by a learning algorithm based on back-propagation. The concept of petri net is used in the development of FNN to get a correlation between the error at the input of the controller and the number of rules of the fuzzy-neural controller leading to a reduction in the number of active rules. The resultant controller is called robust fuzzy neural petri net (RFNPN controller which is created as a software model developed with MATLAB. The developed concepts were evaluated through simulations as well validated by real-time experiments that used a plant system with a water bath to satisfy a temperature control. The effect of disturbance is also studied to prove the system's robustness.

  12. Full-scale validation of wireless hybrid sensor on an in-service highway bridge

    Science.gov (United States)

    Jang, Shinae; Dahal, Sushil; Li, Jingcheng

    2013-04-01

    With the rapid development of electrical circuits, Micro electromechanical system (MEMS) and network technology, wireless smart sensor networks (WSSN) have shown significant potential for replacing existing wired SHM systems due to their cost effectiveness and versatility. A few structural systems have been monitored using WSSN measuring acceleration, temperature, wind speed, humidity; however, a multi-scale sensing device which has the capability to measure the displacement has not been yet developed. In the previous paper, a new high-accuracy displacement sensing system was developed combining a high resolution analog displacement sensor and MEMS-based wireless microprocessor platform. Also, the wireless sensor was calibrated in the laboratory to get the high precision displacement data from analog sensor, and its performance was validated to measure simulated thermal expansion of a laboratory bridge structure. This paper expands the validation of the developed system on full-scale experiments to measure both static and dynamic displacement of expansion joints, temperature, and vibration of an in-service highway bridge. A brief visual investigation of bridges, comparison between theoretical and measured thermal expansion are also provided. The developed system showed the capability to measure the displacement with accuracy of 0.00027 in.

  13. Wireless rechargeable sensor networks

    CERN Document Server

    Yang, Yuanyuan

    2015-01-01

    This SpringerBrief provides a concise guide to applying wireless energy transfer techniques in traditional battery-powered sensor networks. It examines the benefits and challenges of wireless power including efficiency and reliability. The authors build a wireless rechargeable sensor networks from scratch and aim to provide perpetual network operation. Chapters cover a wide range of topics from the collection of energy information and recharge scheduling to joint design with typical sensing applications such as data gathering. Problems are approached using a natural combination of probability

  14. A Wireless Sensor Enabled by Wireless Power

    Science.gov (United States)

    Lee, Da-Sheng; Liu, Yu-Hong; Lin, Chii-Ruey

    2012-01-01

    Through harvesting energy by wireless charging and delivering data by wireless communication, this study proposes the concept of a wireless sensor enabled by wireless power (WPWS) and reports the fabrication of a prototype for functional tests. One WPWS node consists of wireless power module and sensor module with different chip-type sensors. Its main feature is the dual antenna structure. Following RFID system architecture, a power harvesting antenna was designed to gather power from a standard reader working in the 915 MHz band. Referring to the Modbus protocol, the other wireless communication antenna was integrated on a node to send sensor data in parallel. The dual antenna structure integrates both the advantages of an RFID system and a wireless sensor. Using a standard UHF RFID reader, WPWS can be enabled in a distributed area with a diameter up to 4 m. Working status is similar to that of a passive tag, except that a tag can only be queried statically, while the WPWS can send dynamic data from the sensors. The function is the same as a wireless sensor node. Different WPWSs equipped with temperature and humidity, optical and airflow velocity sensors are tested in this study. All sensors can send back detection data within 8 s. The accuracy is within 8% deviation compared with laboratory equipment. A wireless sensor network enabled by wireless power should be a totally wireless sensor network using WPWS. However, distributed WPWSs only can form a star topology, the simplest topology for constructing a sensor network. Because of shielding effects, it is difficult to apply other complex topologies. Despite this limitation, WPWS still can be used to extend sensor network applications in hazardous environments. Further research is needed to improve WPWS to realize a totally wireless sensor network. PMID:23443370

  15. A Wireless Sensor Enabled by Wireless Power

    Directory of Open Access Journals (Sweden)

    Da-Sheng Lee

    2012-11-01

    Full Text Available Through harvesting energy by wireless charging and delivering data by wireless communication, this study proposes the concept of a wireless sensor enabled by wireless power (WPWS and reports the fabrication of a prototype for functional tests. One WPWS node consists of wireless power module and sensor module with different chip-type sensors. Its main feature is the dual antenna structure. Following RFID system architecture, a power harvesting antenna was designed to gather power from a standard reader working in the 915 MHz band. Referring to the Modbus protocol, the other wireless communication antenna was integrated on a node to send sensor data in parallel. The dual antenna structure integrates both the advantages of an RFID system and a wireless sensor. Using a standard UHF RFID reader, WPWS can be enabled in a distributed area with a diameter up to 4 m. Working status is similar to that of a passive tag, except that a tag can only be queried statically, while the WPWS can send dynamic data from the sensors. The function is the same as a wireless sensor node. Different WPWSs equipped with temperature and humidity, optical and airflow velocity sensors are tested in this study. All sensors can send back detection data within 8 s. The accuracy is within 8% deviation compared with laboratory equipment. A wireless sensor network enabled by wireless power should be a totally wireless sensor network using WPWS. However, distributed WPWSs only can form a star topology, the simplest topology for constructing a sensor network. Because of shielding effects, it is difficult to apply other complex topologies. Despite this limitation, WPWS still can be used to extend sensor network applications in hazardous environments. Further research is needed to improve WPWS to realize a totally wireless sensor network.

  16. A Novel Cluster-head Selection Algorithm Based on Hybrid Genetic Optimization for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Lejiang Guo

    2011-05-01

    Full Text Available Wireless Sensor Networks (WSN represent a new dimension in the field of network research. The cluster algorithm can significantly reduce the energy consumption of wireless sensor networks and prolong the network lifetime. This paper uses neuron to describe the WSN node and constructs neural network model for WSN. The neural network model includes three aspects: WSN node neuron model, WSN node control model and WSN node connection model. Through learning the framework of cluster algorithm for wireless sensor networks, this paper presents a weighted average of cluster-head selection algorithm based on an improved Genetic Optimization which makes the node weights directly related to the decision-making predictions. The Algorithm consists of two stages: single-parent evolution and population evolution. The initial population is formed in the stage of single-parent evolution by using gene pool, then the algorithm continues to the next further evolution process, finally the best solution will be generated and saved in the population. The simulation results illustrate that the new algorithm has the high convergence speed and good global searching capacity. It is to effectively balance the network energy consumption, improve the network life-cycle, ensure the communication quality and provide a certain theoretical foundation for the applications of the neural networks.

  17. Wireless Sensors Network (Sensornet)

    Science.gov (United States)

    Perotti, J.

    2003-01-01

    The Wireless Sensor Network System presented in this paper provides a flexible reconfigurable architecture that could be used in a broad range of applications. It also provides a sensor network with increased reliability; decreased maintainability costs, and assured data availability by autonomously and automatically reconfiguring to overcome communication interferences.

  18. Designing a Hybrid Clustering Routing Algorithm based on Cellular Learning Automata for Optimizing Lifetime of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Reza Dovlatabadi

    Full Text Available One of the most important factors in wireless sensor networks is energy consumption, hence the lifetime of these networks are strongly depending on remaining energy in the nodes. According to sensors placement farness and wireless communication between th ...

  19. Miniaturized wireless sensor network

    CERN Document Server

    Lecointre, Aubin; Dubuc, David; Katia, Grenier; Patrick, Pons; Aubert, Hervé; Muller, A; Berthou, Pascal; Gayraud, Thierry; Plana, Robert

    2010-01-01

    This paper addresses an overview of the wireless sensor networks. It is shown that MEMS/NEMS technologies and SIP concept are well suited for advanced architectures. It is also shown analog architectures have to be compatible with digital signal techniques to develop smart network of microsystem.

  20. AN EFFICIENT MAC PROTOCOL BASED ON HYBRID SUPERFRAME FOR WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    Ge Ma

    2009-07-01

    Full Text Available Designing low energy consumption, high efficiency Media Access Control (MAC protocols are one ofthe most important directions in wireless sensor networks (WSN. In this paper, we proposed a newcontention reserve MAC protocol, named CRMAC, under the inspiration of IEEE 802.15.4’s superframestructure. CRMAC is a MAC protocol suitable for intra-cluster WSN that combines the advantages ofcontention and schedule-based MAC protocols. We introduce the mechanism and superframe structure ofCRMAC in detail and verified the performance of this protocol through simulations. Our results showthat CRMAC performs better than IEEE 802.15.4 in energy consumption, system delay and networkthroughput. CRMAC is especially suitable for short packet transmission under low load networks, whichis the main situation in WSN.

  1. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Mobitrum Corporation has demonstrated the feasibility in the Phase I of " A Wireless Sensor Portal Technology" and proposes a Phase II effort to develop a wireless...

  2. Wireless passive radio sensors

    Energy Technology Data Exchange (ETDEWEB)

    Reindl, L. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. fuer Elektrische Informationstechnik; Steindl, R.; Hausleitner, C. [Technische Univ., Vienna (Austria); Pohl, A. [Siemens AG, PSE PRO RCD, Vienna (Austria); School, G. [EPCOS AG, SAW RD SD, Muenchen (Germany)

    2001-07-01

    Surface acoustic wave devices can be turned into identification and sensor elements (SAW transponders) for measuring physical quantities such as temperature, pressure, torque, acceleration, humidity, etc. that do not need any power supply and may be accessed wirelessly. The complete wireless sensor system consists of such a SAW transponder and a local radar transceiver. An RF burst in the VHF/UHF region transmitted by the radar transceiver is received by the antenna of the SAW transponder. The passive transponder responses with an RF signal - like an radar echo - which can be received by the front-end of the local transceiver. Amplitude, frequency, phase and time of arrival of this RF response signal carry information about the SAW reflection and propagation mechanisms which in many cases can be directly attributed to the sensor effect for a certain measurand. Due to the high delay time of the SAW transponder in the order of some {mu}s, usually no intersymbol interferences due to environmental echoes occur. The present work reviews the operating principle of such sensor systems and their state-of-the-art performance by way of some examples which include the wireless measurement of temperature, pressure, torque, acceleration, magnetic field, and water content of soil. (orig.)

  3. Smart Home Wireless Sensor Nodes

    DEFF Research Database (Denmark)

    Lynggaard, Per

    . This paper introduces an approach that considerably lowers the wireless sensor node power consumption and the amount of transmitted sensor events. It uses smart objects that include artificial intelligence to efficiently process the sensor event on location and thereby saves the costly wireless......Smart homes are further development of intelligent buildings and home automation, where context awareness and autonomous behaviour are added. They are based on a combination of the Internet and emerging technologies like wireless sensor nodes. These wireless sensor nodes are challenging because...

  4. High-Performance Wireless Ammonia Gas Sensors Based on Reduced Graphene Oxide and Nano-Silver Ink Hybrid Material Loaded on a Patch Antenna.

    Science.gov (United States)

    Wu, Bian; Zhang, Xingfei; Huang, Beiju; Zhao, Yutong; Cheng, Chuantong; Chen, Hongda

    2017-09-09

    Reduced graphene oxide (rGO) has been studied as a resistive ammonia gas sensor at room temperature. The sensitive hybrid material composed of rGO and nano-silver ink (Ag-ink) was loaded on a microstrip patch antenna to realize high-performance wireless ammonia sensors. The material was investigated using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Firstly, interdigital electrodes (IDEs) printed on the polyethylene terephthalate (PET) by direct printing were employed to measure the variation of resistance of the sensitive material with the ammonia concentration. The results indicated the response of sensor varied from 4.25% to 14.7% under 15-200 ppm ammonia concentrations. Furthermore, the hybrid material was loaded on a microstrip patch antenna fabricated by a conventional printed circuit board (PCB) process, and a 10 MHz frequency shift of the sensor antenna could be observed for 200 ppm ammonia gas. Finally, the wireless sensing property of the sensor antenna was successfully tested using the same emitted antenna outside the gas chamber with a high gain of 5.48 dBi, and an increased reflection magnitude of the emitted antenna due to the frequency mismatch of the sensor antenna was observed. Therefore, wireless ammonia gas sensors loaded on a patch antenna have significant application prospects in the field of Internet of Things (IoTs).

  5. Wearable wireless photoplethysmography sensors

    Science.gov (United States)

    Spigulis, Janis; Erts, Renars; Nikiforovs, Vladimirs; Kviesis-Kipge, Edgars

    2008-04-01

    Wearable health monitoring sensors may support early detection of abnormal conditions and prevention of their consequences. Recent designs of three wireless photoplethysmography monitoring devices embedded in hat, glove and sock, and connected to PC or mobile phone by means of the Bluetooth technology, are described. First results of distant monitoring of heart rate and pulse wave transit time using the newly developed devices are presented.

  6. A Hybrid Secure Scheme for Wireless Sensor Networks against Timing Attacks Using Continuous-Time Markov Chain and Queueing Model

    Directory of Open Access Journals (Sweden)

    Tianhui Meng

    2016-09-01

    Full Text Available Wireless sensor networks (WSNs have recently gained popularity for a wide spectrum of applications. Monitoring tasks can be performed in various environments. This may be beneficial in many scenarios, but it certainly exhibits new challenges in terms of security due to increased data transmission over the wireless channel with potentially unknown threats. Among possible security issues are timing attacks, which are not prevented by traditional cryptographic security. Moreover, the limited energy and memory resources prohibit the use of complex security mechanisms in such systems. Therefore, balancing between security and the associated energy consumption becomes a crucial challenge. This paper proposes a secure scheme for WSNs while maintaining the requirement of the security-performance tradeoff. In order to proceed to a quantitative treatment of this problem, a hybrid continuous-time Markov chain (CTMC and queueing model are put forward, and the tradeoff analysis of the security and performance attributes is carried out. By extending and transforming this model, the mean time to security attributes failure is evaluated. Through tradeoff analysis, we show that our scheme can enhance the security of WSNs, and the optimal rekeying rate of the performance and security tradeoff can be obtained.

  7. An Energy-Aware Hybrid ARQ Scheme with Multi-ACKs for Data Sensing Wireless Sensor Networks.

    Science.gov (United States)

    Zhang, Jinhuan; Long, Jun

    2017-06-12

    Wireless sensor networks (WSNs) are one of the important supporting technologies of edge computing. In WSNs, reliable communications are essential for most applications due to the unreliability of wireless links. In addition, network lifetime is also an important performance metric and needs to be considered in many WSN studies. In the paper, an energy-aware hybrid Automatic Repeat-reQuest protocol (ARQ) scheme is proposed to ensure energy efficiency under the guarantee of network transmission reliability. In the scheme, the source node sends data packets continuously with the correct window size and it does not need to wait for the acknowledgement (ACK) confirmation for each data packet. When the destination receives K data packets, it will return multiple copies of one ACK for confirmation to avoid ACK packet loss. The energy consumption of each node in flat circle network applying the proposed scheme is statistical analyzed and the cases under which it is more energy efficiency than the original scheme is discussed. Moreover, how to select parameters of the scheme is addressed to extend the network lifetime under the constraint of the network reliability. In addition, the energy efficiency of the proposed schemes is evaluated. Simulation results are presented to demonstrate that a node energy consumption reduction could be gained and the network lifetime is prolonged.

  8. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Recognizing the needs and challenges facing NASA Earth Science for data input, manipulation and distribution, Mobitrum is proposing a ? Wireless Sensor Portal...

  9. Fuzzy Based Advanced Hybrid Intrusion Detection System to Detect Malicious Nodes in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rupinder Singh

    2017-01-01

    Full Text Available In this paper, an Advanced Hybrid Intrusion Detection System (AHIDS that automatically detects the WSNs attacks is proposed. AHIDS makes use of cluster-based architecture with enhanced LEACH protocol that intends to reduce the level of energy consumption by the sensor nodes. AHIDS uses anomaly detection and misuse detection based on fuzzy rule sets along with the Multilayer Perceptron Neural Network. The Feed Forward Neural Network along with the Backpropagation Neural Network are utilized to integrate the detection results and indicate the different types of attackers (i.e., Sybil attack, wormhole attack, and hello flood attack. For detection of Sybil attack, Advanced Sybil Attack Detection Algorithm is developed while the detection of wormhole attack is done by Wormhole Resistant Hybrid Technique. The detection of hello flood attack is done by using signal strength and distance. An experimental analysis is carried out in a set of nodes; 13.33% of the nodes are determined as misbehaving nodes, which classified attackers along with a detection rate of the true positive rate and false positive rate. Sybil attack is detected at a rate of 99,40%; hello flood attack has a detection rate of 98, 20%; and wormhole attack has a detection rate of 99, 20%.

  10. Advances in wireless sensors and sensor networks

    CERN Document Server

    Mukhopadhyay, Subhas Chandra; Leung, Henry

    2010-01-01

    Written by experts, this book illustrates and collects recent advances in wireless sensors and sensor networks. It provides clever support for scientists, students and researchers in order to stimulate exchange and discussions for further developments.

  11. Advanced Wireless Sensor Nodes - MSFC

    Science.gov (United States)

    Varnavas, Kosta; Richeson, Jeff

    2017-01-01

    NASA field center Marshall Space Flight Center (Huntsville, AL), has invested in advanced wireless sensor technology development. Developments for a wireless microcontroller back-end were primarily focused on the commercial Synapse Wireless family of devices. These devices have many useful features for NASA applications, good characteristics and the ability to be programmed Over-The-Air (OTA). The effort has focused on two widely used sensor types, mechanical strain gauges and thermal sensors. Mechanical strain gauges are used extensively in NASA structural testing and even on vehicle instrumentation systems. Additionally, thermal monitoring with many types of sensors is extensively used. These thermal sensors include thermocouples of all types, resistive temperature devices (RTDs), diodes and other thermal sensor types. The wireless thermal board will accommodate all of these types of sensor inputs to an analog front end. The analog front end on each of the sensors interfaces to the Synapse wireless microcontroller, based on the Atmel Atmega128 device. Once the analog sensor output data is digitized by the onboard analog to digital converter (A/D), the data is available for analysis, computation or transmission. Various hardware features allow custom embedded software to manage battery power to enhance battery life. This technology development fits nicely into using numerous additional sensor front ends, including some of the low-cost printed circuit board capacitive moisture content sensors currently being developed at Auburn University.

  12. Introduction to wireless sensor networks

    CERN Document Server

    Forster, Anna

    2016-01-01

    Explores real-world wireless sensor network development, deployment, and applications. The book begins with an introduction to wireless sensor networks and their fundamental concepts. Hardware components, operating systems, protocols, and algorithms that make up the anatomy of a sensor node are described in chapter two. Properties of wireless communications, medium access protocols, wireless links, and link estimation protocols are described in chapter three and chapter four. Routing basics and metrics, clustering techniques, time synchronization and localization protocols, as well as sensing techniques are introduced in chapter five to nine. The concluding chapter summarizes the learnt methods and shows how to use them to deploy real-world sensor networks in a structured way.

  13. Wireless sensor networks architectures and protocols

    CERN Document Server

    Callaway, Jr, Edgar H

    2003-01-01

    Introduction to Wireless Sensor NetworksApplications and MotivationNetwork Performance ObjectivesContributions of this BookOrganization of this BookThe Development of Wireless Sensor NetworksEarly Wireless NetworksWireless Data NetworksWireless Sensor and Related NetworksConclusionThe Physical LayerSome Physical Layer ExamplesA Practical Physical Layer for Wireless Sensor NetworksSimulations and ResultsConclusionThe Data Link LayerMedium Access Control TechniquesThe Mediation DeviceSystem Analysis and SimulationConclusionThe Network LayerSome Network Design ExamplesA Wireless Sensor Network De

  14. A Hybrid Indoor Ambient Light and Vibration Energy Harvester for Wireless Sensor Nodes

    Directory of Open Access Journals (Sweden)

    Hua Yu

    2014-05-01

    Full Text Available To take advantage of applications where both light and vibration energy are available, a hybrid indoor ambient light and vibration energy harvesting scheme is proposed in this paper. This scheme uses only one power conditioning circuit to condition the combined output power harvested from both energy sources so as to reduce the power dissipation. In order to more accurately predict the instantaneous power harvested from the solar panel, an improved five-parameter model for small-scale solar panel applying in low light illumination is presented. The output voltage is increased by using the MEMS piezoelectric cantilever arrays architecture. It overcomes the disadvantage of traditional MEMS vibration energy harvester with low voltage output. The implementation of the maximum power point tracking (MPPT for indoor ambient light is implemented using analog discrete components, which improves the whole harvester efficiency significantly compared to the digital signal processor. The output power of the vibration energy harvester is improved by using the impedance matching technique. An efficient mechanism of energy accumulation and bleed-off is also discussed. Experiment results obtained from an amorphous-silicon (a-Si solar panel of 4.8 × 2.0 cm2 and a fabricated piezoelectric MEMS generator of 11 × 12.4 mm2 show that the hybrid energy harvester achieves a maximum efficiency around 76.7%.

  15. A hybrid indoor ambient light and vibration energy harvester for wireless sensor nodes.

    Science.gov (United States)

    Yu, Hua; Yue, Qiuqin; Zhou, Jielin; Wang, Wei

    2014-05-19

    To take advantage of applications where both light and vibration energy are available, a hybrid indoor ambient light and vibration energy harvesting scheme is proposed in this paper. This scheme uses only one power conditioning circuit to condition the combined output power harvested from both energy sources so as to reduce the power dissipation. In order to more accurately predict the instantaneous power harvested from the solar panel, an improved five-parameter model for small-scale solar panel applying in low light illumination is presented. The output voltage is increased by using the MEMS piezoelectric cantilever arrays architecture. It overcomes the disadvantage of traditional MEMS vibration energy harvester with low voltage output. The implementation of the maximum power point tracking (MPPT) for indoor ambient light is implemented using analog discrete components, which improves the whole harvester efficiency significantly compared to the digital signal processor. The output power of the vibration energy harvester is improved by using the impedance matching technique. An efficient mechanism of energy accumulation and bleed-off is also discussed. Experiment results obtained from an amorphous-silicon (a-Si) solar panel of 4.8 × 2.0 cm2 and a fabricated piezoelectric MEMS generator of 11 × 12.4 mm2 show that the hybrid energy harvester achieves a maximum efficiency around 76.7%.

  16. Wireless Sensor Networks for Healthcare Applications

    CERN Document Server

    Dishongh, Terrance J; Kuris, Ben

    2009-01-01

    This unique reference focuses on methods of application, validation and testing based on real deployments of sensor networks in the clinical and home environments. Key topics include healthcare and wireless sensors, sensor network applications, designs of experiments using sensors, data collection and decision making, clinical deployment of wireless sensor networks, contextual awareness medication prompting field trials in homes, social health monitoring, and the future of wireless sensor networks in healthcare.

  17. Wireless SAW Interrogator and Sensor System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless, passive, Surface Acoustic Wave (SAW), Orthogonal Frequency Coded (OFC) temperature sensors, operating in a multi-sensor environment, developed at the...

  18. Sensor Fusion-based Event Detection in Wireless Sensor Networks

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, N.; Havinga, P.J.M.

    2009-01-01

    Recently, Wireless Sensor Networks (WSN) community has witnessed an application focus shift. Although, monitoring was the initial application of wireless sensor networks, in-network data processing and (near) real-time actuation capability have made wireless sensor networks suitable candidate for ev

  19. Integration of RFID and Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Miodrag; Bolic; Amiya; Nayak; Ivan; Stojmenovi.

    2007-01-01

    Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) are two important wireless technologies that have wide variety of applications and provide limitless future potentials. However,RFID and sensor networks almost are under development in parallel way. Integration of RFID and wireless sensor networks attracts little attention from research community. This paper first presents a brief introduction on RFID,and then investigates recent research works,new products/patents and applications that integrate RFID with sensor networks. Four types of integration are discussed. They are integrating tags with sensors,integrating tags with wireless sensor nodes,integrating readers with wireless sensor nodes and wire-less devices,and mix of RFID and sensors. New challenges and future works are discussed in the end.

  20. [Development of Bluetooth wireless sensors].

    Science.gov (United States)

    Moor, C; Schwaibold, M; Roth, H; Schöchlin, J; Bolz, A

    2002-01-01

    Wireless communication could help to overcome current obstacles in medical devices and could enable medical services to offer completely new scenarios in health care. The Bluetooth technology which is the upcoming global market leader in wireless communication turned out to be perfectly suited not only for consumer market products but also in the medical environment [1]. It offers a low power, low cost connection in the medium range of 1-100 m with a bandwidth of currently 723.2 kbaud. This paper describes the development of a wireless ECG device and a Pulse Oximeter. Equipped with a Bluetooth port, the measurement devices are enabled to transmit data between the sensor and a Bluetooth-monitor. Therefore, CSR's Bluetooth protocol embedded two-processor and embedded single-processor architecture has been used.

  1. Integrated Passive And Wireless Sensor

    KAUST Repository

    Li, Bodong

    2015-04-30

    A passive and wireless sensor is provided for sensing at least one of magnetic field, temperature or humidity. The sensor can provide only one of the sensing functions, individually or any combination of them simultaneously. It can be used for various applications where magnetic field changes, temperature and/or humidity need to be measured. In one or more embodiments, a surface acoustic wave (SAW) sensor is provided that can measure one or more of a magnetic field (or current that generates the magnetic field), temperature and humidity. In one or more embodiments, a magnetoimpedence (MI) sensor (for example a thin film giant magnetoimpedance (GMI) sensor), a thermally sensitive (for example a Lithium Niobite (LiNbO.sub.3)) substrate, and a humidity sensitive film (for example a hydrogel film) can be used as sensing elements.

  2. Dynamic wireless sensor networks

    CERN Document Server

    Oteafy, Sharief M A

    2014-01-01

    In this title, the authors leap into a novel paradigm of scalability and cost-effectiveness, on the basis of resource reuse. In a world with much abundance of wirelessly accessible devices, WSN deployments should capitalize on the resources already available in the region of deployment, and only augment it with the components required to meet new application requirements. However, if the required resources already exist in that region, WSN deployment converges to an assignment and scheduling scheme to accommodate for the new application given the existing resources. Such resources are polled

  3. Wireless radiation sensor

    Science.gov (United States)

    Lamberti, Vincent E.; Howell, Jr, Layton N.; Mee, David K.; Kress, Reid L.

    2016-08-09

    Disclosed is a sensor for detecting radiation. The sensor includes a ferromagnetic metal and a radiation sensitive material coupled to the ferromagnetic metal. The radiation sensitive material is operable to change a tensile stress of the ferromagnetic metal upon exposure to radiation. The radiation is detected based on changes in the magnetic switching characteristics of the ferromagnetic metal caused by the changes in the tensile stress.

  4. Wireless Sensor Needs Defined by SBIR Topics

    Science.gov (United States)

    Studor, George F.

    2010-01-01

    This slide presentation reviews the needs for wireless sensor technology from various U.S. government agencies as exhibited by an analysis of Small Business Innovation Research (SBIR) solicitations. It would appear that a multi-agency group looking at overlapping wireless sensor needs and technology projects is desired. Included in this presentation is a review of the NASA SBIR process, and an examination of some of the SBIR projects from NASA, and other agencies that involve wireless sensor development

  5. Programming Wireless Sensor Networks

    Science.gov (United States)

    Lopes, Luís; Martins, Francisco; Barros, João

    Sensor networks can be viewed as a collection of tiny, low-cost devices programmed to sense the physical world and that communicate over radio links [12]. The devices are commonly called motes or smart dust [676], in allusion to their computational and sensing capabilities, as well as their increasingly small size.

  6. Wireless Sensor Networks Approach

    Science.gov (United States)

    Perotti, Jose M.

    2003-01-01

    This viewgraph presentation provides information on hardware and software configurations for a network architecture for sensors. The hardware configuration uses a central station and remote stations. The software configuration uses the 'lost station' software algorithm. The presentation profiles a couple current examples of this network architecture in use.

  7. Passive Wireless SAW Humidity Sensors Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal describes the preliminary development of passive wireless surface acoustic wave (SAW) based humidity sensors for NASA application to distributed...

  8. Hybrid optimal design of the eco-hydrological wireless sensor network in the middle reach of the Heihe River Basin, China.

    Science.gov (United States)

    Kang, Jian; Li, Xin; Jin, Rui; Ge, Yong; Wang, Jinfeng; Wang, Jianghao

    2014-10-14

    The eco-hydrological wireless sensor network (EHWSN) in the middle reaches of the Heihe River Basin in China is designed to capture the spatial and temporal variability and to estimate the ground truth for validating the remote sensing productions. However, there is no available prior information about a target variable. To meet both requirements, a hybrid model-based sampling method without any spatial autocorrelation assumptions is developed to optimize the distribution of EHWSN nodes based on geostatistics. This hybrid model incorporates two sub-criteria: one for the variogram modeling to represent the variability, another for improving the spatial prediction to evaluate remote sensing productions. The reasonability of the optimized EHWSN is validated from representativeness, the variogram modeling and the spatial accuracy through using 15 types of simulation fields generated with the unconditional geostatistical stochastic simulation. The sampling design shows good representativeness; variograms estimated by samples have less than 3% mean error relative to true variograms. Then, fields at multiple scales are predicted. As the scale increases, estimated fields have higher similarities to simulation fields at block sizes exceeding 240 m. The validations prove that this hybrid sampling method is effective for both objectives when we do not know the characteristics of an optimized variables.

  9. Wireless Sensor Network Based Smart Parking System

    National Research Council Canada - National Science Library

    Jeffrey Joseph; Roshan Gajanan Patil; Skanda Kumar Kaipu Narahari; Yogish Didagi; Jyotsna Bapat; Debabrata Das

    2014-01-01

    ... system. Wireless Sensor Networks are one such class of networks, which meet these criteria. These networks consist of spatially distributed sensor motes which work in a co-operative manner to sense and control the environment...

  10. Security Threats in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sushma

    2011-05-01

    Full Text Available Wireless Sensor Network (WSN is an emergingtechnology that shows great promise for variousfuturistic applications both for mass public andmilitary. The sensing technology combined withprocessing power and wireless communication makesit lucrative for being exploited in abundance in future.Wireless sensor networks are characterized byseverely constrained computational and energy resources, and an ad hoc operational environment. Wireless sensor networks (WSN are currently receiving significant attention due to their unlimitedpotential. However, it is still very early in the lifetime of such systems and many research challenges exist. This paper studies the security aspects of these networks.

  11. Sybil attack in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Abirami.K

    2013-04-01

    Full Text Available Wireless network is very susceptible to different types of attack. The main attack is Sybil attack, which allows forming other attacks on the network. Security is very important to the wireless network. In wireless sensor network, to verify node identities by cryptographic authentication but this is not easy because sensor node which contains limited resources. Therefore the current research is going on how to handling the situation of different traffic levels and transmission power for security.

  12. Contemporary Developments in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sangeeta Mittal

    2012-04-01

    Full Text Available Wireless Sensor Networks (WSN since their inception, a decade ago, have grown well in research and implementation. In this work the developments in WSNs are reported in three sub areas of wireless sensor networks that is, wireless sensor node (hardware and software, Communication & Networking issues in WSNs and application areas. WSNs are characterized by huge data hence research work in aggregation & mining is also discussed. Contemporary issues of integration of WSNs with other prevalent networks, sensor enabled smartness and role of artificial intelligence methods is elaborated. Insight into future directions & research avenues in all the above areas is provided

  13. Wireless Sensor Networks: Opportunities and Challenges

    Directory of Open Access Journals (Sweden)

    Matthew N. O. Sadiku

    2014-01-01

    Full Text Available The popularity of cell phones, laptops, PDAs and intelligent electronics has made computing devices to become cheaper and more pervasive in daily life. The desire for connectivity among these devices has caused an exponential growth in wireless communication. Wireless sensor networks (WSNs provide an example of this phenomenon. WSNs belong to the general family of sensor networks that employ distributed sensors to collect information on entities of interest. This paper provides a brief introduction to wireless sensor networks. It addresses the opportunities and challenges of WSNs

  14. The art of wireless sensor networks

    CERN Document Server

    2014-01-01

    During the last one and a half decades, wireless sensor networks have witnessed significant growth and tremendous development in both academia and industry.   “The Art of Wireless Sensor Networks: Volume 1: Fundamentals” focuses on the fundamentals concepts in the design, analysis, and implementation of wireless sensor networks. It covers the various layers of the lifecycle of this type of network from the physical layer up to the application layer. Its rationale is that the first volume covers contemporary design issues, tools, and protocols for radio-based two-dimensional terrestrial sensor networks. All the book chapters in this volume include up-to-date research work spanning various classic facets of the physical properties and functional behavior of wireless sensor networks, including physical layer, medium access control, data routing, topology management, mobility management, localization, task management, data management, data gathering, security, middleware, sensor technology, standards, and ...

  15. Localization Algorithms of Underwater Wireless Sensor Networks: A Survey

    Science.gov (United States)

    Han, Guangjie; Jiang, Jinfang; Shu, Lei; Xu, Yongjun; Wang, Feng

    2012-01-01

    In Underwater Wireless Sensor Networks (UWSNs), localization is one of most important technologies since it plays a critical role in many applications. Motivated by widespread adoption of localization, in this paper, we present a comprehensive survey of localization algorithms. First, we classify localization algorithms into three categories based on sensor nodes’ mobility: stationary localization algorithms, mobile localization algorithms and hybrid localization algorithms. Moreover, we compare the localization algorithms in detail and analyze future research directions of localization algorithms in UWSNs. PMID:22438752

  16. Noncommutative Lightweight Signcryption for Wireless Sensor Networks

    OpenAIRE

    Lize Gu; Yun Pan; Mianxiong Dong; Kaoru Ota

    2013-01-01

    Key management techniques for secure wireless-sensor-networks-based applications must minimally incorporate confidentiality, authenticity, integrity, scalability, and flexibility. Signcryption is the proper primitive to do this. However, existing signcryption schemes are heavyweight and not suitable for resource-limited sensors. In this paper, we at first propose a braid-based signcryption scheme and then develop a key establishment protocol for wireless sensor networks. From the complexity v...

  17. Wireless Multiplexed Surface Acoustic Wave Sensors Project

    Science.gov (United States)

    Youngquist, Robert C.

    2014-01-01

    Wireless Surface Acoustic Wave (SAW) Sensor is a new technology for obtaining multiple, real-time measurements under extreme environmental conditions. This project plans to develop a wireless multiplexed sensor system that uses SAW sensors, with no batteries or semiconductors, that are passive and rugged, can operate down to cryogenic temperatures and up to hundreds of degrees C, and can be used to sense a wide variety of parameters over reasonable distances (meters).

  18. Application for Measurement in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Miroslav MAHDAL

    2009-06-01

    Full Text Available This paper deals with wireless sensor networks, which are based on IEEE 802.15.4 standard. The development kit from Jennic company was used for wireless measuring of values and for creation of sensor network. For this purposes the sensor boards with wireless modules with marking JN5139 were used. These boards provide sensors (sensor of temperature, relative humidity and light sensor but also another interface, which helps to develop applications. Modules are programmed in Integrated Development Environment (IDE, which integrates C function library and C++ compiler and linker. The visualization application was created for monitoring of wireless sensor network. There is the possibility of local and wireless measurement. For creation of this application the SCADA/HMI system, Control Web 5 was used. This SCADA/HMI system enables to communicate with all wireless modules through base station (network's coordinator. The application also enables initialisation and network setting the any wireless module communicating with the base station. The advantage is the remote configuration and control of network. The application also enables the gathering, converting, viewing and archiving of incoming data from particular modules.

  19. On computer vision in wireless sensor networks.

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Nina M.; Ko, Teresa H.

    2004-09-01

    Wireless sensor networks allow detailed sensing of otherwise unknown and inaccessible environments. While it would be beneficial to include cameras in a wireless sensor network because images are so rich in information, the power cost of transmitting an image across the wireless network can dramatically shorten the lifespan of the sensor nodes. This paper describe a new paradigm for the incorporation of imaging into wireless networks. Rather than focusing on transmitting images across the network, we show how an image can be processed locally for key features using simple detectors. Contrasted with traditional event detection systems that trigger an image capture, this enables a new class of sensors which uses a low power imaging sensor to detect a variety of visual cues. Sharing these features among relevant nodes cues specific actions to better provide information about the environment. We report on various existing techniques developed for traditional computer vision research which can aid in this work.

  20. Low-Power Wireless Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg

    , and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto......Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols...... in order to achieve the wanted lifetimes. Through more than a decade of wireless sensor network research, progress towards realizing wanted lifetimes have been made and wireless standards for packet formatting and routing have been proposed. With standards in place, the wide-span between programming...

  1. Low-Power Wireless Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg

    environments and communication primitives in wireless sensor network and traditional network development are closing. However, fundamental differences in wireless technology and energy constraints are still to be considered at the lower levels of the software stack. To fulfill energy requirements hardware......Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols......, and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto...

  2. Energy-Harvesting Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Fafoutis, Xenofon; Vuckovic, Dusan; Di Mauro, Alessio

    2012-01-01

    Energy Harvesting comprises a promising solution to one of the key problems faced by battery-powered Wireless Sensor Networks, namely the limited nature of the energy supply (finite battery capacity). By harvesting energy from the surrounding environment, the sensors can have a continuous lifetime...... Sensor Networks with energy harvesting capability....

  3. Analyzing the Low Power Wireless Links for Wireless Sensor Networks

    CERN Document Server

    Mamun, Md Mainul Islam; Kumar, Sumon; Islam, Md Zahidul

    2010-01-01

    There is now an increased understanding of the need for realistic link layer models in the wireless sensor networks. In this paper, we have used mathematical techniques from communication theory to model and analyze low power wireless links. Our work provides theoretical models for the link layer showing how Packet Reception Rate vary with Signal to Noise Ratio and distance for different modulation schemes and a comparison between MICA2 and TinyNode in terms of PRR.

  4. An Isolation Intrusion Detection System for Hierarchical Wireless Sensor Networks

    OpenAIRE

    Rung-Ching Chen; Chia-Fen Hsieh; Yung-Fa Huang

    2010-01-01

    A wireless sensor network (WSN) is a wireless network consisting of spatially distributed autonomous devices using sensors to cooperatively monitor environmental conditions, such as battlefield data and personal health information, and some environment limited resources. To avoid malicious damage is important while information is transmitted in wireless network. Thus, Wireless Intrusion Detection Systems are crucial to safe operation in wireless sensor networks. Wireless networks are subject ...

  5. Wireless Sensor Networks TestBed: ASNTbed

    CSIR Research Space (South Africa)

    Dludla, AG

    2013-05-01

    Full Text Available Wireless sensor networks (WSNs) have been used in different types of applications and deployed within various environments. Simulation tools are essential for studying WSNs, especially for exploring large-scale networks. However, WSN testbeds...

  6. Artificial intelligence based event detection in wireless sensor networks

    NARCIS (Netherlands)

    Bahrepour, M.

    2013-01-01

    Wireless sensor networks (WSNs) are composed of large number of small, inexpensive devices, called sensor nodes, which are equipped with sensing, processing, and communication capabilities. While traditional applications of wireless sensor networks focused on periodic monitoring, the focus of more

  7. Autonomous solutions for powering wireless sensor nodes in rivers

    Science.gov (United States)

    Kamenar, E.; Maćešić, S.; Gregov, G.; Blažević, D.; Zelenika, S.; Marković, K.; Glažar, V.

    2015-05-01

    There is an evident need for monitoring pollutants and/or other conditions in river flows via wireless sensor networks. In a typical wireless sensor network topography, a series of sensor nodes is to be deployed in the environment, all wirelessly connected to each other and/or their gateways. Each sensor node is composed of active electronic devices that have to be constantly powered. In general, batteries can be used for this purpose, but problems may occur when they have to be replaced. In the case of large networks, when sensor nodes can be placed in hardly accessible locations, energy harvesting can thus be a viable powering solution. The possibility to use three different small-scale river flow energy harvesting principles is hence thoroughly studied in this work: a miniaturized underwater turbine, a so-called `piezoelectric eel' and a hybrid turbine solution coupled with a rigid piezoelectric beam. The first two concepts are then validated experimentally in laboratory as well as in real river conditions. The concept of the miniaturised hydro-generator is finally embedded into the actual wireless sensor node system and its functionality is confirmed.

  8. Distributed Estimation, Coding, and Scheduling in Wireless Visual Sensor Networks

    Science.gov (United States)

    Yu, Chao

    2013-01-01

    In this thesis, we consider estimation, coding, and sensor scheduling for energy efficient operation of wireless visual sensor networks (VSN), which consist of battery-powered wireless sensors with sensing (imaging), computation, and communication capabilities. The competing requirements for applications of these wireless sensor networks (WSN)…

  9. Distributed Estimation, Coding, and Scheduling in Wireless Visual Sensor Networks

    Science.gov (United States)

    Yu, Chao

    2013-01-01

    In this thesis, we consider estimation, coding, and sensor scheduling for energy efficient operation of wireless visual sensor networks (VSN), which consist of battery-powered wireless sensors with sensing (imaging), computation, and communication capabilities. The competing requirements for applications of these wireless sensor networks (WSN)…

  10. On Passive Wireless Sensors Based on Intermodulation Communication

    OpenAIRE

    Song, Jinsong

    2015-01-01

    Wireless sensors are needed in applications where a wired connection is difficult. Wireless sensors are often equipped with a radio transceiver and a battery or another energy source. These energy sources may limit life-time or operation conditions, and increase the size and cost of wireless sensors. Wireless sensors can also be passive. Due to the limited energy available for these sensors, they typically only support relatively short communication distances and may not provide a means fo...

  11. Distributed Algorithms in Wireless Sensor Networks

    NARCIS (Netherlands)

    Nieberg, Tim; Broersma, Hajo; Faigle, Ulrich; Hurink, Johann; Pickl, Stefan; Woeginger, Gerhard

    2003-01-01

    Wireless sensor networks (WSNs) are an emerging field of research which combines many challenges in distributed computing and network optimization. One important goal is to improve the functional lifetime of the sensor network using energy-efficient distributed algorithms, networking and routing tec

  12. Lifetime Analysis of Reliable Wireless Sensor Networks

    NARCIS (Netherlands)

    Baydere, S.; Safkan, Y.; Durmaz Incel, O.

    2005-01-01

    A wireless sensor network is comprised of a large number of battery-limited sensor nodes communicating with unreliable radio links. The nodes are deployed in an ad hoc fashion and a reverse multicast tree is formed in the target domain. The sink node disseminates a query and collects responses from

  13. Passive Wireless SAW Sensors for IVHM

    Science.gov (United States)

    Wilson, William C.; Perey, Daniel F.; Atkinson, Gary M.; Barclay, Rebecca O.

    2008-01-01

    NASA aeronautical programs require integrated vehicle health monitoring (IVHM) to ensure the safety of the crew and the vehicles. Future IVHM sensors need to be small, light weight, inexpensive, and wireless. Surface acoustic wave (SAW) technology meets all of these constraints. In addition it operates in harsh environments and over wide temperature ranges, and it is inherently radiation hardened. This paper presents a survey of research opportunities for universities and industry to develop new sensors that address anticipated IVHM needs for aerospace vehicles. Potential applications of passive wireless SAW sensors from ground testing to high altitude aircraft operations are presented, along with some of the challenges and issues of the technology.

  14. Functional Testing of Wireless Sensor Node Designs

    DEFF Research Database (Denmark)

    Virk, Kashif M.; Madsen, Jan

    2007-01-01

    Wireless sensor networks are networked embedded computer systems with stringent power, performance, cost and form-factor requirements along with numerous other constraints related to their pervasiveness and ubiquitousness. Therefore, only a systematic design methdology coupled with an efficient...... test approach can enable their conformance to design and deployment specifications. We discuss off-line, hierarchical, functional testing of complete wireless sensor nodes containing configurable logic through a combination of FPGA-based board test and Software-Based Self-Test (SBST) techniques....... The proposed functional test methodology has been applied to a COTS-based sensor node development platform and can be applied, in general, for testing all types of wireless sensor node designs....

  15. Development of Time Synchronized Wireless Sensor Network

    Science.gov (United States)

    Uchimura, Yutaka; Takahashi, Motoichi; Nasu, Tadashi

    Network based wireless sensing has become an important area of research and various new applications for remote sensing are expected to emerge. One of the promising applications is structural health monitoring of building or civil engineering structure and it often requires vibration measurement. For the vibration measurement via wireless network, time synchronization is indispensable. In this paper, we introduce a newly developed time synchronized wireless sensor network system. The system employs IEEE 802.11 standard based TSF counter and sends the measured data with the counter value. It enables consistency on common clock among different wireless nodes. We describe the accuracy evaluation by simulation studies when the size of nodes increased. The hardware and software specifications of the developed wireless sensing system are shown. The experiments were conducted in a three-street reinforced concrete building and results showed the system performs more than sufficiently.

  16. 基于TDMA与CDMA混合的传感器网络MAC协议%TDMA/CDMA Hybrid MAC Protocol for Wireless Sensor Network

    Institute of Scientific and Technical Information of China (English)

    古志春; 肖德琴

    2011-01-01

    An efficient MAC protocol is one of the keys for long-time working and high-performance communication of WSN.There are several mechanisms for wireless channel allocation, such as Contention-base Random Access, TDMA (Time Division Multiple Access), FDMA(Frequency Division Multiple Access) and CDMA(Code Division Multiple Access).According to WSN,the CSMA-based MAC protocol bas disadvantages like idle listening and collision; the TDMA-based and FDMA-based MAC protocol has low scalability problem; the CDMA-based MAC protocol has the problem of additional power consumption.After analyzing energy model of the pure TDMA, pure CDMA and hybrid TDMA/CDMA, the paper presented a hybrid TDMA/CDMA MAC protocol based on cluster,which can solve the low latency and the conflict with interference.The protocol proposes the cluster nodes use TDMA and the cluster heads use CDMA.MAC could achieve collision avoidance and low latency in clusters,and do not have to ensure high accuracy synchronization between each cluster, so that the scalability of the sensor network would be enhanced.%MAC协议是保证无线传感器网络正常运作、高效通信的关键.无线传感器网络的无线信道分配机制主要有随机竞争机制、TDMA机制、FDMA机制以及CDMA机制.基于随机竞争的MAC协议存在空闲侦听和数据碰撞等能耗问题;基于TDMA和FDMA的MAC协议存在扩展性差的问题;基于CDMA则存在较多额外能耗开销的问题.在分析纯TDMA、纯CDMA和TDMA/CDMA混合的能耗模型的基础上,提出了一种基于分簇的TDMA/CDMA混合的HCT-MAC协议,它较好地解决了低时延和冲突干扰问题,其簇内节点采用TDMA机制进行信道分配,避免碰撞串扰问题,从而实现低延迟快速上传数据;簇首节点则采用CDMA机制,避免多跳同步问题,增强可扩展性.

  17. Applications of Wireless Sensor Network in Smart Grid

    National Research Council Canada - National Science Library

    Huijun Xu

    2013-01-01

    .... In this paper, we firstly analyzed the characteristics and structures of the smart grid and wireless sensor network, then brought out the applications of wireless sensor network in the smart grid...

  18. Passive Wireless Temperature Sensor for Harsh Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless Sensor Technologies has for several years been developing a passive Wireless Temperature Sensor (WTS) for gas turbine engine and other harsh environment...

  19. Efficient Wireless Charger Deployment for Wireless Rechargeable Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jehn-Ruey Jiang

    2016-08-01

    Full Text Available A wireless rechargeable sensor network (WRSN consists of sensor nodes that can harvest energy emitted from wireless chargers for refilling their batteries so that the WRSN can operate sustainably. This paper assumes wireless chargers are equipped with directional antennas, and are deployed on grid points of a fixed height to propose two heuristic algorithms solving the following wireless charger deployment optimization (WCDO problem: how to deploy as few as possible chargers to make the WRSN sustainable. Both algorithms model the charging space of chargers as a cone and calculate charging efficiency according power regression expressions complying with the Friis transmission equation. The two algorithms are the greedy cone covering (GCC algorithm and the adaptive cone covering (ACC algorithm. The GCC (respectively, ACC algorithm greedily (respectively, adaptively generates candidate cones to cover as many as possible sensor nodes. Both algorithms then greedily select the fewest number of candidate cones, each of which corresponds to the deployment of a charger, to have approximate solutions to the WCDO problem. We perform experiments, conduct simulations and do analyses for the algorithms to compare them in terms of the time complexity, the number of chargers deployed, and the execution time.

  20. Wireless Sensor Networks for Ambient Assisted Living

    Directory of Open Access Journals (Sweden)

    Raúl Aquino-Santos

    2013-11-01

    Full Text Available This paper introduces wireless sensor networks for Ambient Assisted Living as a proof of concept. Our workgroup has developed an arrhythmia detection algorithm that we evaluate in a closed space using a wireless sensor network to relay the information collected to where the information can be registered, monitored and analyzed to support medical decisions by healthcare providers. The prototype we developed is then evaluated using the TelosB platform. The proposed architecture considers very specific restrictions regarding the use of wireless sensor networks in clinical situations. The seamless integration of the system architecture enables both mobile node and network configuration, thus providing the versatile and robust characteristics necessary for real-time applications in medical situations. Likewise, this system architecture efficiently permits the different components of our proposed platform to interact efficiently within the parameters of this study.

  1. Secure Routing in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Soumyashree Sahoo

    2012-01-01

    Full Text Available Wireless sensor networks is the new concept in the field of networks consists of small, large number of sensing nodes which is having the sensing, computational and transmission power. Due to lack of tamper-resistant infrastructure and the insecure nature of wireless communication channels, these networks are vulnerable to internal and external attacks. Key Management is a major challenge to achieve security in wireless sensor networks. Key management includes the process of key setup, the initial distribution of keys and keys revocation. To provide security and proper routing or communication should be encrypted and authenticated. It is not easy to achieve secure key establishment without public key cryptography. In this thesis, some key management schemes have been purposed which will be valuable for secure routing between different sensor nodes.

  2. MAC protocols for wireless sensor networks and their evaluation

    NARCIS (Netherlands)

    Halkes, G.P.

    2009-01-01

    The advent of small, and cheap sensors provides a wide range of measuring options. By making these sensors operate wirelessly we can now measure more than ever. However, wireless operation also provides new challenges. For example, how can we make these wireless sensors communicate effectively, i.e.

  3. MAC protocols for wireless sensor networks and their evaluation

    NARCIS (Netherlands)

    Halkes, G.P.

    2009-01-01

    The advent of small, and cheap sensors provides a wide range of measuring options. By making these sensors operate wirelessly we can now measure more than ever. However, wireless operation also provides new challenges. For example, how can we make these wireless sensors communicate effectively, i.e.

  4. System-level Modeling of Wireless Integrated Sensor Networks

    DEFF Research Database (Denmark)

    Virk, Kashif M.; Hansen, Knud; Madsen, Jan

    2005-01-01

    Wireless integrated sensor networks have emerged as a promising infrastructure for a new generation of monitoring and tracking applications. In order to efficiently utilize the extremely limited resources of wireless sensor nodes, accurate modeling of the key aspects of wireless sensor networks i...

  5. The Effects of Weather on the Life Time of Wireless Sensor Networks Using FSO/RF Communication

    Directory of Open Access Journals (Sweden)

    F. Nadeem

    2010-06-01

    Full Text Available The increased interest in long lasting wireless sensor networks motivates to use Free Space Optics (FSO link along with radio frequency (RF link for communication. Earlier results show that RF/FSO wireless sensor networks have life time twice as long as RF only wireless sensor networks. However, for terrestrial applications, the effect of weather conditions such as fog, rain or snow on optical wireless communication link is major concern, that should be taken into account in the performance analysis. In this paper, life time performance of hybrid wireless sensor networks is compared to wireless sensor networks using RF only for terrestrial applications and weather effects of fog, rain and snow. The results show that combined hybrid network with three threshold scheme can provide efficient power consumption of 6548 seconds, 2118 seconds and 360 seconds for measured fog, snow and rain events respectively resulting in approximately twice of the life time with only RF link.

  6. Wireless Sensor Network for Wearable Physiological Monitoring

    Directory of Open Access Journals (Sweden)

    P. S. Pandian

    2008-05-01

    Full Text Available Wearable physiological monitoring system consists of an array of sensors embedded into the fabric of the wearer to continuously monitor the physiological parameters and transmit wireless to a remote monitoring station. At the remote monitoring station the data is correlated to study the overall health status of the wearer. In the conventional wearable physiological monitoring system, the sensors are integrated at specific locations on the vest and are interconnected to the wearable data acquisition hardware by wires woven into the fabric. The drawbacks associated with these systems are the cables woven in the fabric pickup noise such as power line interference and signals from nearby radiating sources and thereby corrupting the physiological signals. Also repositioning the sensors in the fabric is difficult once integrated. The problems can be overcome by the use of physiological sensors with miniaturized electronics to condition, process, digitize and wireless transmission integrated into the single module. These sensors are strategically placed at various locations on the vest. Number of sensors integrated into the fabric form a network (Personal Area Network and interacts with the human system to acquire and transmit the physiological data to a wearable data acquisition system. The wearable data acquisition hardware collects the data from various sensors and transmits the processed data to the remote monitoring station. The paper discusses wireless sensor network and its application to wearable physiological monitoring and its applications. Also the problems associated with conventional wearable physiological monitoring are discussed.

  7. ANALYSIS OF SECURITY THREATS IN WIRELESS SENSOR NETWORK

    National Research Council Canada - National Science Library

    Sahabul Alam; Debashis De

    2014-01-01

    .... The inclusion of wireless communication technology also incurs various types of security threats due to unattended installation of sensor nodes as sensor networks may interact with sensitive data...

  8. Genetic Algorithm for Hierarchical Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sajid Hussain

    2007-09-01

    Full Text Available Large scale wireless sensor networks (WSNs can be used for various pervasive and ubiquitous applications such as security, health-care, industry automation, agriculture, environment and habitat monitoring. As hierarchical clusters can reduce the energy consumption requirements for WSNs, we investigate intelligent techniques for cluster formation and management. A genetic algorithm (GA is used to create energy efficient clusters for data dissemination in wireless sensor networks. The simulation results show that the proposed intelligent hierarchical clustering technique can extend the network lifetime for different network deployment environments.

  9. Wireless Sensor Applications in Extreme Aeronautical Environments

    Science.gov (United States)

    Wilson, William C.; Atkinson, Gary M.

    2013-01-01

    NASA aeronautical programs require rigorous ground and flight testing. Many of the testing environments can be extremely harsh. These environments include cryogenic temperatures and high temperatures (greater than 1500 C). Temperature, pressure, vibration, ionizing radiation, and chemical exposure may all be part of the harsh environment found in testing. This paper presents a survey of research opportunities for universities and industry to develop new wireless sensors that address anticipated structural health monitoring (SHM) and testing needs for aeronautical vehicles. Potential applications of passive wireless sensors for ground testing and high altitude aircraft operations are presented. Some of the challenges and issues of the technology are also presented.

  10. Stochastic Congestion Control in Wireless Sensor Networks

    Science.gov (United States)

    Kim, Hyung Seok; Lee, Seok; Kim, Namhoon

    In this paper, an effective congestion control algorithm is proposed to increase the end-to-end delivery success ratio of upstream traffic by reduction of buffer drop probabilities and their deviation in wireless sensor networks. According to the queue length of parent and child nodes, each child node chooses one of the parents as the next hop to the sink and controls the delay before transmission begins. It balances traffics among parents and mitigates congestion based on congestion level of a node. Simulation results show that the proposed algorithm reduces buffer drop probabilities and their deviation and increases the end-to-end delivery success ratio in wireless sensor networks.

  11. Energy Efficient MAC for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Pekka KOSKELA

    2010-10-01

    Full Text Available This paper considers an overlay solution for asynchronous Medium Access Control (MAC protocols in a duty-cycled wireless sensor network (WSN. The solution extends sleeping times and corrects time drift when the sampling rate is low. The sleeping time is adjusted according to the requisite data sampling rate and the delay requirements of the prevailing application. This and the time drift correction considerably reduced idle listening and thus also decreased power consumption. When the power consumption is reduced, the life of wireless sensor nodes extends.

  12. Topology Optimisation of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Thike Aye Min

    2016-01-01

    Full Text Available Wireless sensor networks are widely used in a variety of fields including industrial environments. In case of a clustered network the location of cluster head affects the reliability of the network operation. Finding of the optimum location of the cluster head, therefore, is critical for the design of a network. This paper discusses the optimisation approach, based on the brute force algorithm, in the context of topology optimisation of a cluster structure centralised wireless sensor network. Two examples are given to verify the approach that demonstrate the implementation of the brute force algorithm to find an optimum location of the cluster head.

  13. High Temperature, Wireless Seismometer Sensor for Venus

    Science.gov (United States)

    Ponchak, George E.; Scardelletti, Maximilian C.; Taylor, Brandt; Beard, Steve; Meredith, Roger D.; Beheim, Glenn M.; Hunter Gary W.; Kiefer, Walter S.

    2012-01-01

    Space agency mission plans state the need to measure the seismic activity on Venus. Because of the high temperature on Venus (462? C average surface temperature) and the difficulty in placing and wiring multiple sensors using robots, a high temperature, wireless sensor using a wide bandgap semiconductor is an attractive option. This paper presents the description and proof of concept measurements of a high temperature, wireless seismometer sensor for Venus. A variation in inductance of a coil caused by the movement of an aluminum probe held in the coil and attached to a balanced leaf-spring seismometer causes a variation of 700 Hz in the transmitted signal from the oscillator/sensor system at 426? C. This result indicates that the concept may be used on Venus.

  14. Current Trends in Wireless Sensor Network Design

    OpenAIRE

    Neha Jain; Agrawal, Dharma P.

    2005-01-01

    The self-organizing nature of sensor networks, their autonomous operation and potential architectural alternatives make them suitable for different data-centric applications. Their wider acceptance seems to be rising on the horizon. In this article, we present an overview of the current state of the art in the field of wireless sensor networks. We also present various open research issues and provide an insight about the latest developments that need to be explored in greater depth that could...

  15. Location Privacy Issues in Wireless Sensor Networks

    Science.gov (United States)

    Kůr, Jiří; Stetsko, Andriy

    We discuss location privacy issues in wireless sensor networks. We consider sensor nodes with more responsible roles and the need to protect locations of such nodes. Available countermeasures against various types of traffic analysis attacks are examined and their problems are identified. We do not propose new traffic analysis resistance technique. Instead, we draw attention to blanks in current situation and identify several open questions, which should be answered in order to ensure location privacy of nodes.

  16. Wireless Sensor Network for Wearable Physiological Monitoring

    OpenAIRE

    P. S. Pandian; K. P. Safeer; Pragati Gupta; D. T. Shakunthala; B. S. Sundersheshu; V. C. Padaki

    2008-01-01

    Wearable physiological monitoring system consists of an array of sensors embedded into the fabric of the wearer to continuously monitor the physiological parameters and transmit wireless to a remote monitoring station. At the remote monitoring station the data is correlated to study the overall health status of the wearer. In the conventional wearable physiological monitoring system, the sensors are integrated at specific locations on the vest and are interconnected to the wearable data acqui...

  17. Problem solving for wireless sensor networks

    CERN Document Server

    Garcia-Hernando, Ana-Belen; Lopez-Navarro, Juan-Manuel; Prayati, Aggeliki; Redondo-Lopez, Luis

    2008-01-01

    Wireless Sensor Networks (WSN) is an area of huge research interest, attracting substantial attention from industry and academia for its enormous potential and its inherent challenges. This reader-friendly text delivers a comprehensive review of the developments related to the important technological issues in WSN.

  18. Wireless SAW Sensors Having Integrated Antennas

    Science.gov (United States)

    Gallagher, Mark (Inventor); Malocha, Donald C. (Inventor)

    2015-01-01

    A wireless surface acoustic wave sensor includes a piezoelectric substrate, a surface acoustic wave device formed on the substrate, and an antenna formed on the substrate. In some embodiments, the antenna is formed on the surface of the substrate using one or more of photolithography, thin film processing, thick film processing, plating, and printing.

  19. Benchmarking Block Ciphers for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, P.H.

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. We have identified the candidates of block ciphers suitable for W

  20. Benchmarking Block Ciphers for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, Pieter H.

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. We have identified the candidates of block ciphers suitable for

  1. Wireless sensor networks dynamic runtime configuration

    NARCIS (Netherlands)

    Dulman, S.O.; Hofmeijer, T.J.; Havinga, Paul J.M.

    2004-01-01

    Current Wireless Sensor Networks (WSN) use fixed layered architectures, that can be modified only at compile time. Using a non-layered architecture, which allows dynamic loading of modules and automatic reconfiguration to adapt to the surrounding environment was believed to be too resource consuming

  2. Wireless sensor networks principles, design and applications

    CERN Document Server

    Yang, Shuang-Hua

    2014-01-01

    Wireless Sensor Networks presents the latest practical solutions to the design issues presented in wireless-sensor-network-based systems. Novel features of the text, distributed throughout, include workable solutions, demonstration systems and case studies of the design and application of wireless sensor networks (WSNs) based on the first-hand research and development experience of the author, and the chapters on real applications: building fire safety protection; smart home automation; and logistics resource management. Case studies and applications illustrate the practical perspectives of: ·         sensor node design; ·         embedded software design; ·         routing algorithms; ·         sink node positioning; ·         co-existence with other wireless systems; ·         data fusion; ·         security; ·         indoor location tracking; ·         integrating with radio-frequency identification; and ·         In...

  3. Clock Synchronization for Multihop Wireless Sensor Networks

    Science.gov (United States)

    Solis Robles, Roberto

    2009-01-01

    In wireless sensor networks, more so generally than in other types of distributed systems, clock synchronization is crucial since by having this service available, several applications such as media access protocols, object tracking, or data fusion, would improve their performance. In this dissertation, we propose a set of algorithms to achieve…

  4. Data centric wireless sensor networks

    NARCIS (Netherlands)

    Dulman, S.O.; Havinga, Paul J.M.

    2005-01-01

    The vision of wirteless sensing systems requires the development of devices and technologies that can be pervasive without being intrusive. The basic component of such a smart environment will be a small node with sensing and wireless communications capabilities, able to organize itself flexibly

  5. Wireless multimedia sensor networks on reconfigurable hardware information reduction techniques

    CERN Document Server

    Ang, Li-minn; Chew, Li Wern; Yeong, Lee Seng; Chia, Wai Chong

    2013-01-01

    Traditional wireless sensor networks (WSNs) capture scalar data such as temperature, vibration, pressure, or humidity. Motivated by the success of WSNs and also with the emergence of new technology in the form of low-cost image sensors, researchers have proposed combining image and audio sensors with WSNs to form wireless multimedia sensor networks (WMSNs).

  6. The use of Wireless Sensor Network for increasing airport security

    Directory of Open Access Journals (Sweden)

    Jakub Kraus

    2013-11-01

    Full Text Available This article focuses on the use of wireless sensor networks for airport security, respectively using sensor networks as a replacement or add-on to existing security measures. The article describes the sensor network and its possible application to various airport objects and financial analysis of the perimeter security with wireless sensor network.

  7. Coal mine gas monitoring system based on wireless sensor network

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; WANG Ru-lin; WANG Xue-min; SHEN Chuan-he

    2007-01-01

    Based on the nowadays'condition.it is urgent that the gas detection cable communication system must be replaced by the wireless communication systems.The wireless sensors distributed in the environment can achieve the intelligent gas monitoring system.Apply with multilayer data fuse to design working tactics,and import the artificial neural networks to analyze detecting result.The wireless sensors system communicates with the controI center through the optical fiber cable.All the gas sensor nodes distributed in coal mine are combined into an intelligent,flexible structure wireless network system.forming coal mine gas monitoring system based on wireless sensor network.

  8. Wireless sensor networks distributed consensus estimation

    CERN Document Server

    Chen, Cailian; Guan, Xinping

    2014-01-01

    This SpringerBrief evaluates the cooperative effort of sensor nodes to accomplish high-level tasks with sensing, data processing and communication. The metrics of network-wide convergence, unbiasedness, consistency and optimality are discussed through network topology, distributed estimation algorithms and consensus strategy. Systematic analysis reveals that proper deployment of sensor nodes and a small number of low-cost relays (without sensing function) can speed up the information fusion and thus improve the estimation capability of wireless sensor networks (WSNs). This brief also investiga

  9. 自适应Tree-Mesh结构的大棚无线监测网络设计%Design of adaptive tree-mesh hybrid wireless sensor networks for greenhouses

    Institute of Scientific and Technical Information of China (English)

    石繁荣; 黄玉清; 任珍文; 伍春

    2013-01-01

    Wireless sensor networks have been widely utilized in agricultural production in such as crop information monitoring systems, agricultural facilities’wireless control systems, etc. The wireless sensor networks could promote the development of agricultural information and intelligence, and more research has been focused on using ZigBee wireless technology to build the networks in recent years. To collect the base crop status and environmental information of greenhouses in a wireless way, a wireless sensor monitoring network system was designed. The basic work of this paper was the software and hardware system design; further work is projected to be low-power adaptive mechanism design. In analyzing the distribution characteristics of the greenhouse base, it could be seen that the greenhouses were concentrated in their distribution, but independent from each other. So the network topology architecture was designed as clustering Tree-Mesh hybrid topology architecture, and the nodes of the cluster belonged to the same greenhouse. The network was built up by a coordinator, and a large number of routers and sensor nodes were joined in. The coordinator was a sink node, it was designed as a gateway, and there were some routers which played the role of cluster head in the network. The clustering Tree-Mesh hybrid network was built in two steps: First, the mesh network was established by the coordinator and cluster head. Then, the tree network was built by the cluster head, and the tree was a cluster with routers and sensor nodes. The system utilized ZigBee to build the wireless sensor network and multi-hop communication, and the hardware of a single chip multi-sensor wireless node based CC2530 was designed. The modular design of the hardware subsystem was composed of a radio module, sensor module and power module. The finite state machine node software and the low-power improvement were designed based on Z-Stack. The stack ran on a task allocation mechanism that was similar

  10. JSC Wireless Sensor Network Update

    Science.gov (United States)

    Wagner, Robert

    2010-01-01

    Sensor nodes composed of three basic components... radio module: COTS radio module implementing standardized WSN protocol; treated as WSN modem by main board main board: contains application processor (TI MSP430 microcontroller), memory, power supply; responsible for sensor data acquisition, pre-processing, and task scheduling; re-used in every application with growing library of embedded C code sensor card: contains application-specific sensors, data conditioning hardware, and any advanced hardware not built into main board (DSPs, faster A/D, etc.); requires (re-) development for each application.

  11. Performance Evaluation of Page Migration Scheme for NVRAM-Based Wireless Sensor Nodes

    OpenAIRE

    Yeonseung Ryu

    2013-01-01

    A wireless sensor network consists of low-powered and multifunctional sensor nodes. Since each sensor node is operated by a battery, the energy management has become one of the critical design challenges in wireless sensor networks. Some recent studies have shown that DRAM-based main memory spends a significant portion of the total system power. In this paper, we studied a buffer management scheme for hybrid main memory that combines low-power nonvolatile RAM (NVRAM) and DRAM in order to redu...

  12. Ultra wideband technology for wireless sensor networks

    Science.gov (United States)

    Wang, Yue; Xiong, Weiming

    2011-08-01

    Wireless sensor networks (WSNs) have emerged as an important method for planetary surface exploration. To investigate the optimized wireless technology for WSNs, we summarized the key requirements of WSNs and justified ultra wideband (UWB) technology by comparing with other competitive wireless technologies. We also analyzed network topologies as well as physical and MAC layer designs of IEEE 802.15.4a standard, which adopted impulse radio UWB (IR-UWB) technology. Our analysis showed that IR-UWB-based 802.15.4a standard could enable robust communication, precise ranging, and heterogeneous networking for WSNs applications. The result of our present work implies that UWB-based WSNs can be applied to future planetary surface exploration.

  13. Wireless body sensor networks for health-monitoring applications.

    Science.gov (United States)

    Hao, Yang; Foster, Robert

    2008-11-01

    Current wireless technologies, such as wireless body area networks and wireless personal area networks, provide promising applications in medical monitoring systems to measure specified physiological data and also provide location-based information, if required. With the increasing sophistication of wearable and implantable medical devices and their integration with wireless sensors, an ever-expanding range of therapeutic and diagnostic applications is being pursued by research and commercial organizations. This paper aims to provide a comprehensive review of recent developments in wireless sensor technology for monitoring behaviour related to human physiological responses. It presents background information on the use of wireless technology and sensors to develop a wireless physiological measurement system. A generic miniature platform and other available technologies for wireless sensors have been studied in terms of hardware and software structural requirements for a low-cost, low-power, non-invasive and unobtrusive system.

  14. Cooperative Jamming for Physical Layer Security in Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Rohokale, Vandana M.; Prasad, Neeli R.; Prasad, Ramjee

    2012-01-01

    Interference is generally considered as the redundant and unwanted occurrence in wireless communication. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper...

  15. Securing Wireless Sensor Networks: Security Architectures

    Directory of Open Access Journals (Sweden)

    David Boyle

    2008-01-01

    Full Text Available Wireless sensor networking remains one of the most exciting and challenging research domains of our time. As technology progresses, so do the capabilities of sensor networks. Limited only by what can be technologically sensed, it is envisaged that wireless sensor networks will play an important part in our daily lives in the foreseeable future. Privy to many types of sensitive information, both sensed and disseminated, there is a critical need for security in a number of applications related to this technology. Resulting from the continuous debate over the most effective means of securing wireless sensor networks, this paper considers a number of the security architectures employed, and proposed, to date, with this goal in sight. They are presented such that the various characteristics of each protocol are easily identifiable to potential network designers, allowing a more informed decision to be made when implementing a security protocol for their intended application. Authentication is the primary focus, as the most malicious attacks on a network are the work of imposters, such as DOS attacks, packet insertion etc. Authentication can be defined as a security mechanism, whereby, the identity of a node in the network can be identified as a valid node of the network. Subsequently, data authenticity can be achieved; once the integrity of the message sender/receiver has been established.

  16. Energy-efficient MAC protocols for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Li De-liang; Peng Fei

    2009-01-01

    Designing energy-efficient Medium Access Control (MAC) protocols has a significant influence on the energy performance of wireless sensor network (WSN). In this paper we present a survey of the recent typical MAC protocols regarding energy efficiency for WSN. According to channel access policies, we classify these protocols into four categories: contention-based, TDMA-based, hybrid, and cross layer protocols, in which the advantages and disadvantages in each class of MAC protocols are discussed. Finally, we point out open research issues that need to carry on to achieve high energy efficiency for the design of MAC protocols in WSN.

  17. Security in wireless sensor networks

    CERN Document Server

    Oreku, George S

    2016-01-01

    This monograph covers different aspects of sensor network security including new emerging technologies. The authors present a mathematical approach to the topic and give numerous practical examples as well as case studies to illustrate the theory. The target audience primarily comprises experts and practitioners in the field of sensor network security, but the book may also be beneficial for researchers in academia as well as for graduate students.

  18. Architecture and Methods for Innovative Heterogeneous Wireless Sensor Network Applications

    Directory of Open Access Journals (Sweden)

    Pedro Antonio

    2012-04-01

    Full Text Available Nowadays wireless sensor netwoks (WSN technology, wireless communications and digital electronics have made it realistic to produce a large scale miniaturized devices integrating sensing, processing and communication capabilities. The focus of this paper is to present an innovative mobile platform for heterogeneous sensor networks, combined with adaptive methods to optimize the communication architecture for novel potential applications in multimedia and entertainment. In fact, in the near future, some of the applications foreseen for WSNs will employ multi-platform systems with a high number of different devices, which may be completely different in nature, size, computational and energy capabilities, etc. Nowadays, in addition, data collection could be performed by UAV platforms which can be a sink for ground sensors layer, acting essentially as a mobile gateway. In order to maximize the system performances and the network lifespan, the authors propose a recently developed hybrid technique based on evolutionary algorithms. The goal of this procedure is to optimize the communication energy consumption in WSN by selecting the optimal multi-hop routing schemes, with a suitable hybridization of different routing criteria. The proposed approach can be potentially extended and applied to ongoing research projects focused on UAV-based sensing with WSN augmentation and real-time processing for immersive media experiences.

  19. SITRUS: Semantic Infrastructure for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Kalil A. Bispo

    2015-10-01

    Full Text Available Wireless sensor networks (WSNs are made up of nodes with limited resources, such as processing, bandwidth, memory and, most importantly, energy. For this reason, it is essential that WSNs always work to reduce the power consumption as much as possible in order to maximize its lifetime. In this context, this paper presents SITRUS (semantic infrastructure for wireless sensor networks, which aims to reduce the power consumption of WSN nodes using ontologies. SITRUS consists of two major parts: a message-oriented middleware responsible for both an oriented message communication service and a reconfiguration service; and a semantic information processing module whose purpose is to generate a semantic database that provides the basis to decide whether a WSN node needs to be reconfigurated or not. In order to evaluate the proposed solution, we carried out an experimental evaluation to assess the power consumption and memory usage of WSN applications built atop SITRUS.

  20. Application of Wireless Sensor Networks to Automobiles

    Science.gov (United States)

    Tavares, Jorge; Velez, Fernando J.; Ferro, João M.

    2008-01-01

    Some applications of Wireless Sensor Networks (WSNs) to the automobile are identified, and the use of Crossbow MICAz motes operating at 2.4 GHz is considered together with TinyOS support. These WSNs are conceived in order to measure, process and supply to the user diverse types of information during an automobile journey. Examples are acceleration and fuel consumption, identification of incorrect tire pressure, verification of illumination, and evaluation of the vital signals of the driver. A brief survey on WSNs concepts is presented, as well as the way the wireless sensor network itself was developed. Calibration curves were produced which allowed for obtaining luminous intensity and temperature values in the appropriate units. Aspects of the definition of the architecture and the choice/implementation of the protocols are identified. Security aspects are also addressed.

  1. Hack Recognition In Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    B. Srinivasulu

    2014-09-01

    Full Text Available A wireless sensor network can get separated into multiple connected components due to the failure of some of its nodes, which is called a ―cut‖. In this article we consider the problem of detecting cuts by the remaining nodes of a wireless sensor network. We propose an algorithm that allows like every node to detect when the connectivity to a specially designated node has been lost, and one or more nodes (that are connected to the special node after the cut to detect the occurrence of the cut. The algorithm is distributed and asynchronous: every node needs to communicate with only those nodes that are within its communication range. The algorithm is based on the iterative computation of a fictitious ―electrical potential‖ of the nodes. The convergence rate of the underlying iterative scheme is independent of the size and structure of the network.

  2. A COMPARATIVE STUDY IN WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    Hasan Al-Refai

    2014-02-01

    Full Text Available Sensor networks consist of a large number of small, low-powered wireless nodes with limited computation, communication, and sensing abilities, in a battery-powered sensor network, energy and communication bandwidth are a precious resources. Thus, there is a need to adapt the networking process to match the application in order to minimize the resources consumed and extend the life of the network. In this paper, we introduce a comparative study in different routing algorithms that propose vital solutions to the most important issues that should be taken into account when designing wireless network which are reliability, lifetime, communication bandwidth, transmission rand, and finally the limited energy issue, so we will introduce their algorithms and discuss how did they propose to solve such of these challenges and finally we will do some evaluation to each approach.

  3. SITRUS: Semantic Infrastructure for Wireless Sensor Networks.

    Science.gov (United States)

    Bispo, Kalil A; Rosa, Nelson S; Cunha, Paulo R F

    2015-10-29

    Wireless sensor networks (WSNs) are made up of nodes with limited resources, such as processing, bandwidth, memory and, most importantly, energy. For this reason, it is essential that WSNs always work to reduce the power consumption as much as possible in order to maximize its lifetime. In this context, this paper presents SITRUS (semantic infrastructure for wireless sensor networks), which aims to reduce the power consumption of WSN nodes using ontologies. SITRUS consists of two major parts: a message-oriented middleware responsible for both an oriented message communication service and a reconfiguration service; and a semantic information processing module whose purpose is to generate a semantic database that provides the basis to decide whether a WSN node needs to be reconfigurated or not. In order to evaluate the proposed solution, we carried out an experimental evaluation to assess the power consumption and memory usage of WSN applications built atop SITRUS.

  4. Application Independent Energy Efficient Data Aggregation in Wireless Sensor Networks

    CERN Document Server

    Virmani, Deepali; Ghanshyam,; Ahlawat, Khyati; Noble,

    2012-01-01

    Wireless Sensor networks are dense networks of small, low-cost sensors, which collect and disseminate environmental data and thus facilitate monitoring and controlling of physical environment from remote locations with better accuracy. The major challenge is to achieve energy efficiency during the communication among the nodes. This paper aims at proposing a solution to schedule the node's activities to reduce the energy consumption. We propose the construction of a decentralized lifetime maximizing tree within clusters. We aim at minimizing the distance of transmission with minimization of energy consumption. The sensor network is distributed into clusters based on the close proximity of the nodes. Data transfer among the nodes is done with a hybrid technique of both TDMA/ FDMA which leads to efficient utilization of bandwidth and maximizing throughput.

  5. Wireless Sensor Networks for High Fidelity Sampling

    Science.gov (United States)

    2007-07-20

    Seismological Laboratory underground seismometer calibration vault. Testing showed that the SiliconDesigns 1221L devices have a noise floor of 32µG...wireless sensor networks. In SIGCOMM 2006, Pisa, Italy , August 2006. [74] Luigi Rizzo. Effective erasure codes for reliable computer communication proto...Proceedings of the seventh annual international conference on Mobile computing and networking, Rome, Italy , July 2001. [86] Alec Woo, Terence Tong, and

  6. Artificial intelligence based event detection in wireless sensor networks

    NARCIS (Netherlands)

    Bahrepour, Majid

    2013-01-01

    Wireless sensor networks (WSNs) are composed of large number of small, inexpensive devices, called sensor nodes, which are equipped with sensing, processing, and communication capabilities. While traditional applications of wireless sensor networks focused on periodic monitoring, the focus of more r

  7. Key handling in wireless sensor networks

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y; Newe, T [Optical Fibre Sensors Research Centre, Department of Electronic and Computer Engineering, University of Limerick, Limerick (Ireland)

    2007-07-15

    With the rapid growth of Wireless Sensor Networks (WSNs), many advanced application areas have received significant attention. However, security will be an important factor for their full adoption. Wireless sensor nodes pose unique challenges and as such traditional security protocols, used in traditional networks cannot be applied directly. Some new protocols have been published recently with the goal of providing both privacy of data and authentication of sensor nodes for WSNs. Such protocols can employ private-key and/or public key cryptographic algorithms. Public key algorithms hold the promise of simplifying the network infrastructure required to provide security services such as: privacy, authentication and non-repudiation, while symmetric algorithms require less processing power on the lower power wireless node. In this paper a selection of key establishment/agreement protocols are reviewed and they are broadly divided into two categories: group key agreement protocols and pair-wise key establishment protocols. A summary of the capabilities and security related services provided by each protocol is provided.

  8. Key Management in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ismail Mansour

    2015-09-01

    Full Text Available Wireless sensor networks are a challenging field of research when it comes to security issues. Using low cost sensor nodes with limited resources makes it difficult for cryptographic algorithms to function without impacting energy consumption and latency. In this paper, we focus on key management issues in multi-hop wireless sensor networks. These networks are easy to attack due to the open nature of the wireless medium. Intruders could try to penetrate the network, capture nodes or take control over particular nodes. In this context, it is important to revoke and renew keys that might be learned by malicious nodes. We propose several secure protocols for key revocation and key renewal based on symmetric encryption and elliptic curve cryptography. All protocols are secure, but have different security levels. Each proposed protocol is formally proven and analyzed using Scyther, an automatic verification tool for cryptographic protocols. For efficiency comparison sake, we implemented all protocols on real testbeds using TelosB motes and discussed their performances.

  9. Rechargeable wireless EMG sensor for prosthetic control.

    Science.gov (United States)

    Lichter, P A; Lange, E H; Riehle, T H; Anderson, S M; Hedin, D S

    2010-01-01

    Surface electrodes in modern myoelectric prosthetics are often embedded in the prosthesis socket and make contact with the skin. These electrodes detect and amplify muscle action potentials from voluntary contractions of the muscle in the residual limb and are used to control the prosthetic's movement and function. There are a number of performance-related deficiencies associated with external electrodes including the maintenance of sufficient electromyogram (EMG) signal amplitude, extraneous noise acquisition, and proper electrode interface maintenance that are expected to be improved or eliminated using the proposed implanted sensors. This research seeks to investigate the design components for replacing external electrodes with fully-implantable myoelectric sensors that include a wireless interface to the prosthetic limbs. This implanted technology will allow prosthetic limb manufacturers to provide products with increased performance, capability, and patient-comfort. The EMG signals from the intramuscular recording electrode are amplified and wirelessly transmitted to a receiver in the prosthetic limb. Power to the implant is maintained using a rechargeable battery and an inductive energy transfer link from the prosthetic. A full experimental system was developed to demonstrate that a wireless biopotential sensor can be designed that meets the requirements of size, power, and performance for implantation.

  10. Wireless sensor networks and ecological monitoring

    CERN Document Server

    Jiang, Joe-Air

    2013-01-01

    This book presents the state of the art technologies and solutions to tackle the critical challenges faced by the building and development of the WSN and ecological monitoring system but also potential impact on society at social, medical and technological level. This book is dedicated to Sensing systems for Sensors, Wireless Sensor Networks and Ecological Monitoring. The book aims at Master and PhD degree students, researchers, practitioners, especially WSN engineers involved with ecological monitoring. The book will provide an opportunity of a dedicated and a deep approach in order to improve their knowledge in this specific field.  

  11. NEURON: Enabling Autonomicity in Wireless Sensor Networks

    Science.gov (United States)

    Zafeiropoulos, Anastasios; Gouvas, Panagiotis; Liakopoulos, Athanassios; Mentzas, Gregoris; Mitrou, Nikolas

    2010-01-01

    Future Wireless Sensor Networks (WSNs) will be ubiquitous, large-scale networks interconnected with the existing IP infrastructure. Autonomic functionalities have to be designed in order to reduce the complexity of their operation and management, and support the dissemination of knowledge within a WSN. In this paper a novel protocol for energy efficient deployment, clustering and routing in WSNs is proposed that focuses on the incorporation of autonomic functionalities in the existing approaches. The design of the protocol facilitates the design of innovative applications and services that are based on overlay topologies created through cooperation among the sensor nodes. PMID:22399931

  12. NEURON: Enabling Autonomicity in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Anastasios Zafeiropoulos

    2010-05-01

    Full Text Available Future Wireless Sensor Networks (WSNs will be ubiquitous, large-scale networks interconnected with the existing IP infrastructure. Autonomic functionalities have to be designed in order to reduce the complexity of their operation and management, and support the dissemination of knowledge within a WSN. In this paper a novel protocol for energy efficient deployment, clustering and routing in WSNs is proposed that focuses on the incorporation of autonomic functionalities in the existing approaches. The design of the protocol facilitates the design of innovative applications and services that are based on overlay topologies created through cooperation among the sensor nodes.

  13. Autonomic Context-Aware Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Nídia G. S. Campos

    2015-01-01

    Full Text Available Autonomic Computing allows systems like wireless sensor networks (WSN to self-manage computing resources in order to extend their autonomy as much as possible. In addition, contextualization tasks can fuse two or more different sensor data into a more meaningful information. Since these tasks usually run in a single centralized context server (e.g., sink node, the massive volume of data generated by the wireless sensors can lead to a huge information overload in such server. Here we propose DAIM, a distributed autonomic inference machine distributed which allows the sensor nodes to do self-management and contextualization tasks based on fuzzy logic. We have evaluated DAIM in a real sensor network taking into account other inference machines. Experimental results illustrate that DAIM is an energy-efficient contextualization method for WSN, reducing 48.8% of the number of messages sent to the context servers while saving 19.5% of the total amount of energy spent in the network.

  14. Wireless sensor networks in a maritime environment

    Science.gov (United States)

    Kavelaars, W.; Maris, M.

    2005-10-01

    In the recent years, there has been a lot of research on sensor networks and their applications. In particular for monitoring large and potentially hostile areas these networks have proven to be very useful. The technique of land-based sensor networks can be extrapolated to sensing buoys at sea or in harbors. This is a novel and intriguing addition to existing maritime monitoring systems. At TNO, much research effort has gone into developing sensor networks. In this paper, the TNOdes sensor network is presented. Its practical employability is demonstrated in a surveillance application deploying 50 nodes. The system is capable of tracking persons in a field, as would be the situation around a military compound. A camera-system is triggered by the sensors and zooms into the detected moving objects. It is described how this system could be modified to create a wireless buoys network. Typical applications of a wireless (and potentially mobile) buoy network are bay-area surveillance, mine detection, identification and ship protection.

  15. Industrial wireless sensor networks applications, protocols, and standards

    CERN Document Server

    Güngör, V Çagri

    2013-01-01

    The collaborative nature of industrial wireless sensor networks (IWSNs) brings several advantages over traditional wired industrial monitoring and control systems, including self-organization, rapid deployment, flexibility, and inherent intelligent processing. In this regard, IWSNs play a vital role in creating more reliable, efficient, and productive industrial systems, thus improving companies' competitiveness in the marketplace. Industrial Wireless Sensor Networks: Applications, Protocols, and Standards examines the current state of the art in industrial wireless sensor networks and outline

  16. Graphical Model Theory for Wireless Sensor Networks

    Energy Technology Data Exchange (ETDEWEB)

    Davis, William B.

    2002-12-08

    Information processing in sensor networks, with many small processors, demands a theory of computation that allows the minimization of processing effort, and the distribution of this effort throughout the network. Graphical model theory provides a probabilistic theory of computation that explicitly addresses complexity and decentralization for optimizing network computation. The junction tree algorithm, for decentralized inference on graphical probability models, can be instantiated in a variety of applications useful for wireless sensor networks, including: sensor validation and fusion; data compression and channel coding; expert systems, with decentralized data structures, and efficient local queries; pattern classification, and machine learning. Graphical models for these applications are sketched, and a model of dynamic sensor validation and fusion is presented in more depth, to illustrate the junction tree algorithm.

  17. High availability of hybrid wireless networks

    Science.gov (United States)

    Leitgeb, Erich; Gebhart, Michael; Birnbacher, Ulla; Kogler, Wolfgang; Schrotter, Peter

    2004-09-01

    Free Space Optical (FSO) links offer high bandwidth and the flexibility of wireless communication links. However, the availability of FSO links is limited by weather patterns like fog and heavy snowfall. Microwave based communication links operating at high frequencies (40 - 43 GHz) have similar characteristics like high data rates and needed line-of-sight. Link availability for microwave systems is limited by heavy rain. Combining FSO links with microwave links within a hybrid FSO/microwave communication network has the advantage of added redundancy and higher link availability. Measurements over a period of one year show a combined availability of 99.93% for the climatic region of Graz, Austria) which proves that the combination of both technologies leads to a highly available wireless connection offering high bandwidth.

  18. Hypergol Sensor Using Passive Wireless SAW Devices Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal describes the preliminary development of surface acoustic wave (SAW) based hypergolic fuel sensors for NASA application to distributed wireless leak...

  19. Cognitive Radio Wireless Sensor Networks: Applications, Challenges and Research Trends

    Directory of Open Access Journals (Sweden)

    Gyanendra Prasad Joshi

    2013-08-01

    Full Text Available A cognitive radio wireless sensor network is one of the candidate areas where cognitive techniques can be used for opportunistic spectrum access. Research in this area is still in its infancy, but it is progressing rapidly. The aim of this study is to classify the existing literature of this fast emerging application area of cognitive radio wireless sensor networks, highlight the key research that has already been undertaken, and indicate open problems. This paper describes the advantages of cognitive radio wireless sensor networks, the difference between ad hoc cognitive radio networks, wireless sensor networks, and cognitive radio wireless sensor networks, potential application areas of cognitive radio wireless sensor networks, challenges and research trend in cognitive radio wireless sensor networks. The sensing schemes suited for cognitive radio wireless sensor networks scenarios are discussed with an emphasis on cooperation and spectrum access methods that ensure the availability of the required QoS. Finally, this paper lists several open research challenges aimed at drawing the attention of the readers toward the important issues that need to be addressed before the vision of completely autonomous cognitive radio wireless sensor networks can be realized.

  20. Cognitive radio wireless sensor networks: applications, challenges and research trends.

    Science.gov (United States)

    Joshi, Gyanendra Prasad; Nam, Seung Yeob; Kim, Sung Won

    2013-08-22

    A cognitive radio wireless sensor network is one of the candidate areas where cognitive techniques can be used for opportunistic spectrum access. Research in this area is still in its infancy, but it is progressing rapidly. The aim of this study is to classify the existing literature of this fast emerging application area of cognitive radio wireless sensor networks, highlight the key research that has already been undertaken, and indicate open problems. This paper describes the advantages of cognitive radio wireless sensor networks, the difference between ad hoc cognitive radio networks, wireless sensor networks, and cognitive radio wireless sensor networks, potential application areas of cognitive radio wireless sensor networks, challenges and research trend in cognitive radio wireless sensor networks. The sensing schemes suited for cognitive radio wireless sensor networks scenarios are discussed with an emphasis on cooperation and spectrum access methods that ensure the availability of the required QoS. Finally, this paper lists several open research challenges aimed at drawing the attention of the readers toward the important issues that need to be addressed before the vision of completely autonomous cognitive radio wireless sensor networks can be realized.

  1. Wireless Sensor Network Handles Image Data

    Science.gov (United States)

    2008-01-01

    To relay data from remote locations for NASA s Earth sciences research, Goddard Space Flight Center contributed to the development of "microservers" (wireless sensor network nodes), which are now used commercially as a quick and affordable means to capture and distribute geographical information, including rich sets of aerial and street-level imagery. NASA began this work out of a necessity for real-time recovery of remote sensor data. These microservers work much like a wireless office network, relaying information between devices. The key difference, however, is that instead of linking workstations within one office, the interconnected microservers operate miles away from one another. This attribute traces back to the technology s original use: The microservers were originally designed for seismology on remote glaciers and ice streams in Alaska, Greenland, and Antarctica-acquiring, storing, and relaying data wirelessly between ground sensors. The microservers boast three key attributes. First, a researcher in the field can establish a "managed network" of microservers and rapidly see the data streams (recovered wirelessly) on a field computer. This rapid feedback permits the researcher to reconfigure the network for different purposes over the course of a field campaign. Second, through careful power management, the microservers can dwell unsupervised in the field for up to 2 years, collecting tremendous amounts of data at a research location. The third attribute is the exciting potential to deploy a microserver network that works in synchrony with robotic explorers (e.g., providing ground truth validation for satellites, supporting rovers as they traverse the local environment). Managed networks of remote microservers that relay data unsupervised for up to 2 years can drastically reduce the costs of field instrumentation and data rec

  2. mm-Wave Hybrid Photonic Wireless Links for Ultra-High Speed Wireless Transmissions

    DEFF Research Database (Denmark)

    Rommel, Simon; Vegas Olmos, Juan José; Tafur Monroy, Idelfonso

    Hybrid photonic-wireless transmission schemes in the mm-wave frequency range are promising candidates to enable the multi-gigabit per second data communications required from wireless and mobile networks of the 5th and future generations. Large FCC spectrum allocations for wireless transmission...

  3. Target Tracking In Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sunita Gola

    2012-09-01

    Full Text Available The problem being tackled here relates to the problem of target tracking in wireless sensor networks. It is a specific problem in localization. Localization primarily refers to the detection of spatial coordinates of a node or an object. Target tracking deals with finding spatial coordinates of a moving object and being able to track its movements. In the tracking scheme illustrated, sensors are deployed in a triangular fashion in a hexagonal mesh such that the hexagon is divided into a number of equilateral triangles. The technique used for detection is the trilateration technique in which intersection of three circles is used to determine the object location. While the object is being tracked by three sensors, distance to it from a fourth sensor is also being calculated simultaneously. The difference is that closest three sensors detect at a frequency of one second while the fourth sensor detects the object location at twice the frequency. Using the distance information from the fourth sensor and a simple mathematical technique, location of object ispredicted for every half second as well. The key thing to note is that the forth sensor node is not used for detection but only for estimation of the object at half second intervals and hence does not utilize much power. Using this technique, tracking capability of the system is increased.

  4. A simulation model for the lifetime of wireless sensor networks

    CERN Document Server

    Elleithy, Abdelrahman

    2012-01-01

    In this paper we present a model for the lifetime of wireless sensor networks. The model takes into consideration several parameters such as the total number of sensors, network size, percentage of sink nodes, location of sensors, the mobility of sensors, and power consumption. A definition of the life time of the network based on three different criteria is introduced; percentage of available power to total power, percentage of alive sensors to total sensors, and percentage of alive sink sensors to total sink sensors. A Matlab based simulator is developed for the introduced model. A number of wireless sensor networks scenarios are presented and discussed.

  5. Wireless Sensor Network for Medical Applications

    Directory of Open Access Journals (Sweden)

    Hanady S.Ahmed

    2015-06-01

    Full Text Available This work presents a healthcare monitoring system that can be used in an intensive care room. Biological information represented by ECG signals is achieved by ECG acquisition part . AD620 Instrumentation Amplifier selected due to its low current noise. The ECG signals of patients in the intensive care room are measured through wireless nodes. A base node is connected to the nursing room computer via a USB port , and is programmed with a specific firmware. The ECG signals are transferred wirelessly to the base node using nRF24L01+ wireless module. So, the nurse staff has a real time information for each patient available in the intensive care room. A star Wireless Sensor Network is designed for collecting ECG signals . ATmega328 MCU in the Arduino Uno board used for this purpose. Internet for things used For transferring ECG signals to the remote doctor, a Virtual Privet Network is established to connect the nursing room computer and the doctor computer . So, the patients information kept secure. Although the constructed network is tested for ECG monitoring, but it can be used to monitor any other signals.

  6. Track classification within wireless sensor network

    Science.gov (United States)

    Doumerc, Robin; Pannetier, Benjamin; Moras, Julien; Dezert, Jean; Canevet, Loic

    2017-05-01

    In this paper, we present our study on track classification by taking into account environmental information and target estimated states. The tracker uses several motion model adapted to different target dynamics (pedestrian, ground vehicle and SUAV, i.e. small unmanned aerial vehicle) and works in centralized architecture. The main idea is to explore both: classification given by heterogeneous sensors and classification obtained with our fusion module. The fusion module, presented in his paper, provides a class on each track according to track location, velocity and associated uncertainty. To model the likelihood on each class, a fuzzy approach is used considering constraints on target capability to move in the environment. Then the evidential reasoning approach based on Dempster-Shafer Theory (DST) is used to perform a time integration of this classifier output. The fusion rules are tested and compared on real data obtained with our wireless sensor network.In order to handle realistic ground target tracking scenarios, we use an autonomous smart computer deposited in the surveillance area. After the calibration step of the heterogeneous sensor network, our system is able to handle real data from a wireless ground sensor network. The performance of this system is evaluated in a real exercise for intelligence operation ("hunter hunt" scenario).

  7. Bridge monitoring using heterogeneous wireless sensor network

    Science.gov (United States)

    Haran, Shivan; Kher, Shubhalaxmi; Mehndiratta, Vandana

    2010-03-01

    Wireless sensor networks (WSN) are proving to be a good fit where real time monitoring of multiple physical parameters is required. In many applications such as structural health monitoring, patient data monitoring, traffic accident monitoring and analysis, sensor networks may involve interface with conventional P2P systems and it is challenging to handle heterogeneous network systems. Heterogeneous deployments will become increasingly prevalent as it allows for systems to seamlessly integrate and interoperate especially when it comes to applications involving monitoring of large infrastructures. Such networks may have wireless sensor network overlaid on a conventional computer network to pick up data from one distant location and carry out the analysis after relaying it over to another distant location. This paper discusses monitoring of bridges using WSN. As a test bed, a heterogeneous network of WSN and conventional P2P together with a combination of sensing devices (including vibration and strain) is to be used on a bridge model. Issues related to condition assessment of the bridge for situations including faults, overloads, etc., as well as analysis of network and system performance will be discussed. When conducted under controlled conditions, this is an important step towards fine tuning the monitoring system for recommendation of permanent mounting of sensors and collecting data that can help in the development of new methods for inspection and evaluation of bridges. The proposed model, design, and issues therein will be discussed, along with its implementation and results.

  8. Towards fully integrated wireless impedimetric sensors.

    Science.gov (United States)

    Segura-Quijano, Fredy; Sacristán-Riquelme, Jordi; García-Cantón, Jesús; Osés, Maria Teresa; Baldi, Antonio

    2010-01-01

    We report on the design and characterization of the building blocks of a single-chip wireless chemical sensor fabricated with a commercial complementary metal-oxide-silicon (CMOS) technology, which includes two types of transducers for impedimetric measurements (4-electrode array and two interdigitated electrodes), instrumentation circuits, and a metal coil and circuits for inductive power and data transfer. The electrodes have been formed with a polycrystalline silicon layer of the technology by a simple post-process that does not require additional deposition or lithography steps, but just etching steps. A linear response to both conductivity and permittivity of solutions has been obtained. Wireless communication of the sensor chip with a readout unit has been demonstrated. The design of the chip was prepared for individual block characterization and not for full system characterization. The integration of chemical transducers within monolithic wireless platforms will lead to smaller, cheaper, and more reliable chemical microsensors, and will open up the door to numerous new applications where liquid mediums that are enclosed in sealed receptacles have to be measured.

  9. Towards Fully Integrated Wireless Impedimetric Sensors

    Directory of Open Access Journals (Sweden)

    Fredy Segura-Quijano

    2010-04-01

    Full Text Available We report on the design and characterization of the building blocks of a single-chip wireless chemical sensor fabricated with a commercial complementary metal-oxide-silicon (CMOS technology, which includes two types of transducers for impedimetric measurements (4-electrode array and two interdigitated electrodes, instrumentation circuits, and a metal coil and circuits for inductive power and data transfer. The electrodes have been formed with a polycrystalline silicon layer of the technology by a simple post-process that does not require additional deposition or lithography steps, but just etching steps. A linear response to both conductivity and permittivity of solutions has been obtained. Wireless communication of the sensor chip with a readout unit has been demonstrated. The design of the chip was prepared for individual block characterization and not for full system characterization. The integration of chemical transducers within monolithic wireless platforms will lead to smaller, cheaper, and more reliable chemical microsensors, and will open up the door to numerous new applications where liquid mediums that are enclosed in sealed receptacles have to be measured.

  10. Simultaneity Analysis In A Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Malović Miodrag

    2015-06-01

    Full Text Available An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with special emphasis on the influence of different effects on simultaneity of data acquired from remote nodes, which is essential for modal analysis. One of the issues is that quartz crystal oscillators, which provide time reading on the devices, are optimized for use in the room temperature and exhibit significant frequency variations if operated outside the 20–30°C range. Although much research was performed to optimize algorithms of synchronization in wireless networks, the subject of temperature fluctuations was not investigated and discussed in proportion to its significance. This paper describes methods used to evaluate data simultaneity and some algorithms suitable for its improvement in small to intermediate size ad-hoc wireless sensor networks exposed to varying temperatures often present in on-site civil engineering measurements.

  11. Wireless Integrated Microelectronic Vacuum Sensor System

    Science.gov (United States)

    Krug, Eric; Philpot, Brian; Trott, Aaron; Lawrence, Shaun

    2013-01-01

    NASA Stennis Space Center's (SSC's) large rocket engine test facility requires the use of liquid propellants, including the use of cryogenic fluids like liquid hydrogen as fuel, and liquid oxygen as an oxidizer (gases which have been liquefied at very low temperatures). These fluids require special handling, storage, and transfer technology. The biggest problem associated with transferring cryogenic liquids is product loss due to heat transfer. Vacuum jacketed piping is specifically designed to maintain high thermal efficiency so that cryogenic liquids can be transferred with minimal heat transfer. A vacuum jacketed pipe is essentially two pipes in one. There is an inner carrier pipe, in which the cryogenic liquid is actually transferred, and an outer jacket pipe that supports and seals the vacuum insulation, forming the "vacuum jacket." The integrity of the vacuum jacketed transmission lines that transfer the cryogenic fluid from delivery barges to the test stand must be maintained prior to and during engine testing. To monitor the vacuum in these vacuum jacketed transmission lines, vacuum gauge readings are used. At SSC, vacuum gauge measurements are done on a manual rotation basis with two technicians, each using a handheld instrument. Manual collection of vacuum data is labor intensive and uses valuable personnel time. Additionally, there are times when personnel cannot collect the data in a timely fashion (i.e., when a leak is detected, measurements must be taken more often). Additionally, distribution of this data to all interested parties can be cumbersome. To simplify the vacuum-gauge data collection process, automate the data collection, and decrease the labor costs associated with acquiring these measurements, an automated system that monitors the existing gauges was developed by Invocon, Inc. For this project, Invocon developed a Wireless Integrated Microelectronic Vacuum Sensor System (WIMVSS) that provides the ability to gather vacuum

  12. An Energy Efficient Analysis of S-MAC And H-MAC Protocols for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    P.T.Kalaivaani

    2013-04-01

    Full Text Available Wireless Sensor Networks (WSNs is an interesting topic to the researchers because of its variousapplications. The applications are health monitoring and environmental monitoring, Industrial ProcessMonitoring, Target detection, Target tracking, Energy Efficiency, Disaster Management and MilitarySecurity Systems. The wireless medium requires highly optimized medium Access Protocols to avoidinterferences. Limited resources have driven the research towards energy consumption of MACfunctionalities. Two Medium Access Control (MAC protocol performances are analyzed by using the MAClayer frame work for wireless sensor networks. In this paper an energy efficient analysis of S-MAC and HMACprotocols for wireless sensor networks is proposed with spatial correlation concept. Two MACprotocols such as Sensor MAC (S-MAC and Hybrid MAC (H-MAC protocols are proposed to analyze theperformance of Wireless Sensor Network using four different Parameters such as End to End delay, PacketDelivery Ratio, Packet Drop Rate and Energy Consumption. Performance analysis is carried out by usingthe simulation tool NS2.

  13. Security Threats in Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Giannetsos, Athanasios

    2011-01-01

    intrusions forms an important part of an integrated approach to network security. In this work, we start by considering the problem of cooperative intrusion detection in WSNs and develop a lightweight ID system, called LIDeA, which follows an intelligent agent-based architecture. We show how such a system....... Security and privacy are rapidly replacing performance as the first and foremost concern in many sensor networking scenarios. While security prevention is important, it cannot guarantee that attacks will not be launched and that, once launched, they will not be successful. Therefore, detection of malicious...... networks are. Motivated by this unexplored security aspect, we investigate a new set of memory related vulnerabilities for sensor embedded devices that, if exploited, can lead to the execution of software-based attacks. We demonstrate how to execute malware on wireless sensor nodes that are based...

  14. Intrusion Detection in Wireless Body Sensor Networks

    Directory of Open Access Journals (Sweden)

    Nadya El MOUSSAID

    2017-01-01

    Full Text Available The recent advances in electronic and robotics industry have enabled the manufacturing of sensors capable of measuring a set of application-oriented parameters and transmit them back to the base station for analysis purposes. These sensors are widely used in many applications including the healthcare systems forming though a Wireless Body Sensor Networks. The medical data must be highly secured and possible intrusion has to be fully detected to proceed with the prevention phase. In this paper, we propose a new intrusion superframe schema for 802.15.6 standard to detect the cloning attack. The results proved the efficiency of our technique in detecting this type of attack based on 802.15.6 parameters performances coupled with frequency switching at the radio model.

  15. A Survey on Wireless Sensor Network Security

    CERN Document Server

    Sen, Jaydip

    2010-01-01

    Wireless sensor networks (WSNs) have recently attracted a lot of interest in the research community due their wide range of applications. Due to distributed nature of these networks and their deployment in remote areas, these networks are vulnerable to numerous security threats that can adversely affect their proper functioning. This problem is more critical if the network is deployed for some mission-critical applications such as in a tactical battlefield. Random failure of nodes is also very likely in real-life deployment scenarios. Due to resource constraints in the sensor nodes, traditional security mechanisms with large overhead of computation and communication are infeasible in WSNs. Security in sensor networks is, therefore, a particularly challenging task. This paper discusses the current state of the art in security mechanisms for WSNs. Various types of attacks are discussed and their countermeasures presented. A brief discussion on the future direction of research in WSN security is also included.

  16. Reputation-Based Secure Sensor Localization in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jingsha He

    2014-01-01

    Full Text Available Location information of sensor nodes in wireless sensor networks (WSNs is very important, for it makes information that is collected and reported by the sensor nodes spatially meaningful for applications. Since most current sensor localization schemes rely on location information that is provided by beacon nodes for the regular sensor nodes to locate themselves, the accuracy of localization depends on the accuracy of location information from the beacon nodes. Therefore, the security and reliability of the beacon nodes become critical in the localization of regular sensor nodes. In this paper, we propose a reputation-based security scheme for sensor localization to improve the security and the accuracy of sensor localization in hostile or untrusted environments. In our proposed scheme, the reputation of each beacon node is evaluated based on a reputation evaluation model so that regular sensor nodes can get credible location information from highly reputable beacon nodes to accomplish localization. We also perform a set of simulation experiments to demonstrate the effectiveness of the proposed reputation-based security scheme. And our simulation results show that the proposed security scheme can enhance the security and, hence, improve the accuracy of sensor localization in hostile or untrusted environments.

  17. Throughput Maximization for Wireless Multimedia Sensor Networks in Industrial Applications

    Directory of Open Access Journals (Sweden)

    M.Markco

    2014-06-01

    Full Text Available n recent years, there has been growing interests in wireless sensor networks. Wireless sensor network is an autonomous system of sensor connected by wireless devices without any fixed infrastructure support. To meet the challenge paradigms of wireless sensor networks like Energy efficiency, Delay constraints, Reliability and adaptive mechanis m the sensor nodes are enhanced with multimedia support. The Wireless multimedia sensor nodes (WMSN enable to streamline the data that will control and monitor the industrial activities within the sensing area. The adaptive sleepless protocol will address the following issues: First, this protocol mainly designed for desired packet delivery and delay probabilities while reducing the energy consumption of the network. Second, this protocol is based on demand based dynamic sleep scheduling scheme for data communication. In this packets are transmitted through the cross layer interaction. In this cross layer interaction enables to reach a maximum efficiency.

  18. Wireless Magnetic Sensor with Orthogonal Frequency Coding Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this SBIR Phase I research project is to develop batteryless, wireless magnetic sensors with orthogonal frequency coding (OFC). These sensors will be...

  19. Wireless SAW Sensor Strain Gauge & Integrated Interrogator Design Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed Wireless, passive, SAW sensor system operates in a multi-sensor environment with a range in excess of 45 feet. This proposed system offers unique...

  20. New Wireless Sensors for Diagnostics Under Harsh Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is an acute need for robust sensors and sensor systems capable of operation in harsh environments. In particular, high temperature passive wireless surface...

  1. Wireless SAW Sensor Strain Gauge & Integrated Interrogator Design Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless, passive, Surface Acoustic Wave (SAW) temperature sensors, which can operate in a multi-sensor environment, have recently been successfully demonstrated. A...

  2. Distributed Wireless Sensor Data Acquisition and Control System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Combining smart sensor with wireless technology is a compelling addition to structure a large-scale smart sensor networks for real-time data acquisition, distributed...

  3. Indoor Wireless RF Energy Transfer for Powering Wireless Sensors

    Directory of Open Access Journals (Sweden)

    H. Visser

    2012-12-01

    Full Text Available For powering wireless sensors in buildings, rechargeable batteries may be used. These batteries will be recharged remotely by dedicated RF sources. Far-field RF energy transport is known to suffer from path loss and therefore the RF power available on the rectifying antenna or rectenna will be very low. As a consequence, the RF-to-DC conversion efficiency of the rectenna will also be very low. By optimizing not only the subsystems of a rectenna but also taking the propagation channel into account and using the channel information for adapting the transmit antenna radiation pattern, the RF energy transport efficiency will be improved. The rectenna optimization, channel modeling and design of a transmit antenna are discussed.

  4. Heterogeneous LEACH Protocol for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Nishi Sharma

    2013-07-01

    Full Text Available Wireless Sensor Networks are networks of large number of tiny, battery powered sensor nodes having limited on-board storage, processing, and radio capabilities. Nodes sense and send their reports toward a processing center which is called base station. Since this transmission and reception process consumes lots of energy as compare to data processing, Designing protocols and applications for such networks has to be energy aware in order to prolong the lifetime of the network. Generally, real life applications deal with such Heterogeneity rather than Homogeneity. In this paper, a protocol is proposed, which is heterogeneous in energy. We analyze the basic distributed clustering routing protocol LEACH (Low Energy Adaptive Clustering Hierarchy, which is a homogeneous system, and then we study the impact of heterogeneity in energy of nodes to prolong the life time of WSN. Simulation results using MATLAB shows that the proposed Leach-heterogeneous system significantly reduces energy consumption and increase the total lifetime of the wireless sensor network.

  5. A hybrid system identification methodology for wireless structural health monitoring systems based on dynamic substructuring

    Science.gov (United States)

    Dragos, Kosmas; Smarsly, Kay

    2016-04-01

    System identification has been employed in numerous structural health monitoring (SHM) applications. Traditional system identification methods usually rely on centralized processing of structural response data to extract information on structural parameters. However, in wireless SHM systems the centralized processing of structural response data introduces a significant communication bottleneck. Exploiting the merits of decentralization and on-board processing power of wireless SHM systems, many system identification methods have been successfully implemented in wireless sensor networks. While several system identification approaches for wireless SHM systems have been proposed, little attention has been paid to obtaining information on the physical parameters (e.g. stiffness, damping) of the monitored structure. This paper presents a hybrid system identification methodology suitable for wireless sensor networks based on the principles of component mode synthesis (dynamic substructuring). A numerical model of the monitored structure is embedded into the wireless sensor nodes in a distributed manner, i.e. the entire model is segmented into sub-models, each embedded into one sensor node corresponding to the substructure the sensor node is assigned to. The parameters of each sub-model are estimated by extracting local mode shapes and by applying the equations of the Craig-Bampton method on dynamic substructuring. The proposed methodology is validated in a laboratory test conducted on a four-story frame structure to demonstrate the ability of the methodology to yield accurate estimates of stiffness parameters. Finally, the test results are discussed and an outlook on future research directions is provided.

  6. An energy efficient clustering routing algorithm for wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    LI Li; DONG Shu-song; WEN Xiang-ming

    2006-01-01

    This article proposes an energy efficient clustering routing (EECR) algorithm for wireless sensor network. The algorithm can divide a sensor network into a few clusters and select a cluster head base on weight value that leads to more uniform energy dissipation evenly among all sensor nodes.Simulations and results show that the algorithm can save overall energy consumption and extend the lifetime of the wireless sensor network.

  7. Wearable wireless multi-parameter sensor module for physiological monitoring.

    Science.gov (United States)

    Liverud, Anders E; Vedum, Jon; Fleurey, Franck; Seeberg, Trine M

    2012-01-01

    Advances in low power technology have given new possibilities for continuous physiological monitoring in several domains such as health care with disease prevention and quality of care services and workers in harsh environment. A miniaturized, multifunctional sensor module that transmits sensor data wirelessly using Bluetooth Smart technology has been developed. The wireless communication link is influenced by factors like antenna orientation, reflections, interference and noise. Test results for signal strength measurements for the wireless transmission in various setups are given and discussed.

  8. Multihop Routing In Self-Organizing Wireless Sensor Networks

    OpenAIRE

    Rajashree V. Biradar; Sawant, S. R.; R. R. Mudholkar; V. C. Patil

    2011-01-01

    Wireless sensor networks have emerged in the past decade as a result of recent advances in microelectronic system fabrication, wireless communications, integrated circuit technologies, microprocessor hardware and nano-technology, progress in ad-hoc networking routing protocols, distributed signal processing, pervasive computing and embedded systems. As routing protocols are application specific, recent advances in wireless sensor networks have led to many new protocols specifically designed f...

  9. Application of wireless sensor system on security network

    Science.gov (United States)

    Oh, Sechang; Kwon, Hyeokjun; Yoon, Hargsoon; Varadan, Vijay K.

    2010-04-01

    In this research we developed wireless sensor system for security application. We have used geophone to detect seismic signals which are generated by footsteps. Geophones are resonant devices. Therefore, vibration on the land can generate seismic waveforms which could be very similar to the signature by footstep. The signals from human footstep have weak signals to noise ratio and the signal strength is subject to the distance between the sensor and human. In order to detect weak signals from footstep, we designed and fabricated 2-stage amplification circuit which consists of active and RC filters and amplifiers. The bandwidth of filter is 0.7Hz-150Hz and the gain of amplifier is set to 1000. The wireless sensor system also developed to monitor the sensing signals at the remote place. The wireless sensor system consists of 3 units; a wireless sensor unit, a wireless receiver unit, and a monitoring unit. The wireless sensor unit transmits amplified signals from geophone with Zigbee, and the wireless receiver unit which has both Zigbee and Wi-Fi module receives signals from the sensor unit and transmits signals to the monitoring system with Zigbee and Wi-Fi, respectively. By using both Zigbee and Wi-Fi, the wireless sensor system can achieve the low power consumption and wide range coverage.

  10. BABY MONITORING SYSTEM USING WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    G. Rajesh

    2014-09-01

    Full Text Available Sudden Infant Death Syndrome (SIDS is marked by the sudden death of an infant during sleep that is not predicted by the medical history and remains unexplained even after thorough forensic autopsy and detailed death investigation. In this we developed a system that provides solutions for the above problems by making the crib smart using the wireless sensor networks (WSN and smart phones. The system provides visual monitoring service through live video, alert services by crib fencing and awakens alert, monitoring services by temperature reading and light intensity reading, vaccine reminder and weight monitoring.

  11. Wireless sensor networks from theory to applications

    CERN Document Server

    El Emary, Ibrahiem M M

    2013-01-01

    Although there are many books available on WSNs, most are low-level, introductory books. The few available for advanced readers fail to convey the breadth of knowledge required for those aiming to develop next-generation solutions for WSNs. Filling this void, Wireless Sensor Networks: From Theory to Applications supplies comprehensive coverage of WSNs. In order to provide the wide-ranging guidance required, the book brings together the contributions of domain experts working in the various subfields of WSNs worldwide. This edited volume examines recent advances in WSN technologies and consider

  12. Wireless sensors networks MAC protocols analysis

    CERN Document Server

    Chaari, Lamia

    2010-01-01

    Wireless sensors networks performance are strictly related to the medium access mechanism. An effective one, require non-conventional paradigms for protocol design due to several constraints. An adequate equilibrium between communication improvement and data processing capabilities must be accomplished. To achieve low power operation, several MAC protocols already proposed for WSN. The aim of this paper is to survey and to analyze the most energy efficient MAC protocol in order to categorize them and to compare their performances. Furthermore we have implemented some of WSN MAC protocol under OMNET++ with the purpose to evaluate their performances.

  13. An Improved Wireless Sensor Network Routing Algorithm

    Institute of Scientific and Technical Information of China (English)

    Shengmei Luo; Xue Li; Yiai Jin; Zhixin Sun

    2015-01-01

    High performance with low power consumption is an essential factor in wireless sensor networks (WSN). In order to address the issue on the lifetime and the consumption of nodes in WSNs, an improved ad hoc on⁃demand distance vector rout⁃ing (IAODV) algorithm is proposed based on AODV and LAR protocols. This algorithm is a modified on⁃demand routing al⁃gorithm that limits data forwarding in the searching domain, and then chooses the route on basis of hop count and power consumption. The simulation results show that the algorithm can effectively reduce power consumption as well as prolong the network lifetime.

  14. Target Coverage in Wireless Sensor Networks with Probabilistic Sensors.

    Science.gov (United States)

    Shan, Anxing; Xu, Xianghua; Cheng, Zongmao

    2016-08-27

    Sensing coverage is a fundamental problem in wireless sensor networks (WSNs), which has attracted considerable attention. Conventional research on this topic focuses on the 0/1 coverage model, which is only a coarse approximation to the practical sensing model. In this paper, we study the target coverage problem, where the objective is to find the least number of sensor nodes in randomly-deployed WSNs based on the probabilistic sensing model. We analyze the joint detection probability of target with multiple sensors. Based on the theoretical analysis of the detection probability, we formulate the minimum ϵ-detection coverage problem. We prove that the minimum ϵ-detection coverage problem is NP-hard and present an approximation algorithm called the Probabilistic Sensor Coverage Algorithm (PSCA) with provable approximation ratios. To evaluate our design, we analyze the performance of PSCA theoretically and also perform extensive simulations to demonstrate the effectiveness of our proposed algorithm.

  15. A Wireless Sensor Network For Soil Monitoring

    Science.gov (United States)

    Szlavecz, K.; Cogan, J.; Musaloiu-Elefteri, R.; Small, S.; Terzis, A.; Szalay, A.

    2005-12-01

    The most spatially complex stratum of a terrestrial ecosystem is its soil. Among the major challenges of studying the soil ecosystem are the diversity and the cryptic nature of biota, and the enormous heterogeneity of the soil substrate. Often this patchiness drives spatial distribution of soil organisms, yet our knowledge on the spatio-temporal patterns of soil conditions is limited. To monitor the environmental conditions at biologically meaningful spatial scales we have developed and deployed a wireless sensor network of thirty nodes. Each node is based on a MICAz mote connected to a custom-built sensor suite that includes a Watermark soil moisture sensor, an Irrometer soil temperature sensor, and sensors capable of recording ambient temperature and light intensity. To assess CO2 production at the ground level a subset of the nodes is equipped with Telaire 6004 CO2 sensor. We developed the software running on the motes from scratch, using the TinyOS development environment. Each mote collects measurements every minute, and stores them persistently in a non-volatile memory. The decision to store data locally at each node enables us to reliably retrieve the data in the face of network losses and premature node failures due to power depletion. Collected measurements are retrieved over the wireless network through a PC-class computer acting as a gateway between the sensor network and the Internet. Considering that motes are battery powered, the largest obstacle hindering long-term sensor network deployments is power consumption. To address this problem, our software powers down sensors between sampling cycles and turns off the radio (the most energy prohibitive mote component) when not in use. By doing so we were able to increase node lifetime by a factor of ten. We collected field data over several weeks. The data was ingested into a SQL Server database, which provides data access through a .NET web services interface. The database provides functions for spatial

  16. An Efficient Multitask Scheduling Model for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Hongsheng Yin

    2014-01-01

    Full Text Available The sensor nodes of multitask wireless network are constrained in performance-driven computation. Theoretical studies on the data processing model of wireless sensor nodes suggest satisfying the requirements of high qualities of service (QoS of multiple application networks, thus improving the efficiency of network. In this paper, we present the priority based data processing model for multitask sensor nodes in the architecture of multitask wireless sensor network. The proposed model is deduced with the M/M/1 queuing model based on the queuing theory where the average delay of data packets passing by sensor nodes is estimated. The model is validated with the real data from the Huoerxinhe Coal Mine. By applying the proposed priority based data processing model in the multitask wireless sensor network, the average delay of data packets in a sensor nodes is reduced nearly to 50%. The simulation results show that the proposed model can improve the throughput of network efficiently.

  17. Handbook of sensor networks compact wireless and wired sensing systems

    CERN Document Server

    Ilyas, Mohammad

    2004-01-01

    INTRODUCTION Opportunities and Challenges in Wireless Sensor Networks, M. Haenggi, Next Generation Technologies to Enable Sensor Networks, J. I.  Goodman, A. I. Reuther, and D. R. Martinez Sensor Networks Management, L. B. Ruiz, J. M. Nogueira, and A. A. F. Loureiro Models for Programmability in Sensor Networks, A. Boulis Miniaturizing Sensor Networks with MEMS, Brett Warneke A Taxonomy of Routing Techniques in Wireless Sensor Networks, J. N. Al-Karaki and A. E. Kamal Artificial Perceptual Systems, A. Loutfi, M. Lindquist, and P. Wide APPLICATIONS Sensor Network Architecture and Appl

  18. Synchronized Data Aggregation for Wireless Sensor Network

    DEFF Research Database (Denmark)

    Dnyaneshwar, Mantri; Prasad, Neeli R.; Prasad, Ramjee

    2014-01-01

    Wireless Sensor Networks (WSNs) are used for monitoring and data collection purposes. A key challenge in effective data collection is to schedule and synchronize the activities of the nodes with global clock. This paper proposes the Synchronized Data Aggregation Algorithm (SDA) using spanning tree...... mechanism. It provides network-wide time synchronization for sensor network. In the initial stage algorithm established the hierarchical structure in the network and then perform the pair - wise synchronization. SDA aggregate data with a global time scale throughout the network. The aggregated packets...... are scheduled using TDMA as the MAC layer protocol. Simulation results show that, SDA gives promising result of energy efficiency and delay as compared with state-of-the-art solutions....

  19. Detecting vital signs with wearable wireless sensors.

    Science.gov (United States)

    Yilmaz, Tuba; Foster, Robert; Hao, Yang

    2010-01-01

    The emergence of wireless technologies and advancements in on-body sensor design can enable change in the conventional health-care system, replacing it with wearable health-care systems, centred on the individual. Wearable monitoring systems can provide continuous physiological data, as well as better information regarding the general health of individuals. Thus, such vital-sign monitoring systems will reduce health-care costs by disease prevention and enhance the quality of life with disease management. In this paper, recent progress in non-invasive monitoring technologies for chronic disease management is reviewed. In particular, devices and techniques for monitoring blood pressure, blood glucose levels, cardiac activity and respiratory activity are discussed; in addition, on-body propagation issues for multiple sensors are presented.

  20. Energy Consumption in Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    JIN Yan; WANG Ling; YANG Xiao-zong; WEN Dong-xin

    2007-01-01

    Wireless sensor networks (WSNs) can be used to collect surrounding data by multi-hop. As sensor networks have the constrained and not rechargeable energy resource, energy efficiency is an important design issue for its topology. In this paper, the energy consumption issue under the different topology is studied. We derive the exact mathematical expression of energy consumption for the fiat and clustering scheme, respectively. Then the energy consumptions of different schemes are compared. By the comparison, multi-level clustering scheme is more energy efficient in large scale networks. Simulation results demonstrate that our analysis is correct from the view of prolonging the large-scale network lifetime and achieving more power reductions.

  1. Wireless Sensors for Wind Turbine Blades Monitoring

    Science.gov (United States)

    Iftimie, N.; Steigmann, R.; Danila, N. A.; Rosu, D.; Barsanescu, P. D.; Savin, A.

    2017-06-01

    The most common defects in turbine blades may be faulty microscopic and mesoscopic appeared in matrix, no detected by classical nondestructive testing (i.e. using phased array sensors), broken fibers can also appear and develop under moderated loads, or cracks and delaminations due to low energy impacts, etc. The paper propose to present the results obtained from testing of glass fiber reinforced plastic used in the construction of the wind turbine blades as well as the monitoring of the entire scalable blade using wireless sensors placed on critical location on blade. In order to monitories the strain/stress during the tests, the determination of the location and the nature of defects have been simulated using FEM.

  2. Suppressing Redundancy in Wireless Sensor Network Traffic

    Science.gov (United States)

    Abe, Rey; Honiden, Shinichi

    Redundancy suppression is a network traffic compression technique that, by caching recurring transmission contents at receiving nodes, avoids repeatedly sending duplicate data. Existing implementations require abundant memory both to analyze recent traffic for redundancy and to maintain the cache. Wireless sensor nodes at the same time cannot provide such resources due to hardware constraints. The diversity of protocols and traffic patterns in sensor networks furthermore makes the frequencies and proportions of redundancy in traffic unpredictable. The common practice of narrowing down search parameters based on characteristics of representative packet traces when dissecting data for redundancy thus becomes inappropriate. Such difficulties made us devise a novel protocol that conducts a probabilistic traffic analysis to identify and cache only the subset of redundant transfers that yields most traffic savings. We verified this approach to perform close enough to a solution built on exhaustive analysis and unconstrained caching to be practicable.

  3. Energy Options for Wireless Sensor Nodes

    Directory of Open Access Journals (Sweden)

    Chris Knight

    2008-12-01

    Full Text Available Reduction in size and power consumption of consumer electronics has opened up many opportunities for low power wireless sensor networks. One of the major challenges is in supporting battery operated devices as the number of nodes in a network grows. The two main alternatives are to utilize higher energy density sources of stored energy, or to generate power at the node from local forms of energy. This paper reviews the state-of-the art technology in the field of both energy storage and energy harvesting for sensor nodes. The options discussed for energy storage include batteries, capacitors, fuel cells, heat engines and betavoltaic systems. The field of energy harvesting is discussed with reference to photovoltaics, temperature gradients, fluid flow, pressure variations and vibration harvesting.

  4. Detecting Vital Signs with Wearable Wireless Sensors

    Directory of Open Access Journals (Sweden)

    Yang Hao

    2010-12-01

    Full Text Available The emergence of wireless technologies and advancements in on-body sensor design can enable change in the conventional health-care system, replacing it with wearable health-care systems, centred on the individual. Wearable monitoring systems can provide continuous physiological data, as well as better information regarding the general health of individuals. Thus, such vital-sign monitoring systems will reduce health-care costs by disease prevention and enhance the quality of life with disease management. In this paper, recent progress in non-invasive monitoring technologies for chronic disease management is reviewed. In particular, devices and techniques for monitoring blood pressure, blood glucose levels, cardiac activity and respiratory activity are discussed; in addition, on-body propagation issues for multiple sensors are presented.

  5. A Wireless Laser Displacement Sensor Node for Structural Health Monitoring

    Directory of Open Access Journals (Sweden)

    Se Woon Choi

    2013-09-01

    Full Text Available This study describes a wireless laser displacement sensor node that measures displacement as a representative damage index for structural health monitoring (SHM. The proposed measurement system consists of a laser displacement sensor (LDS and a customized wireless sensor node. Wireless communication is enabled by a sensor node that consists of a sensor module, a code division multiple access (CDMA communication module, a processor, and a power module. An LDS with a long measurement distance is chosen to increase field applicability. For a wireless sensor node driven by a battery, we use a power control module with a low-power processor, which facilitates switching between the sleep and active modes, thus maximizing the power consumption efficiency during non-measurement and non-transfer periods. The CDMA mode is also used to overcome the limitation of communication distance, which is a challenge for wireless sensor networks and wireless communication. To evaluate the reliability and field applicability of the proposed wireless displacement measurement system, the system is tested onsite to obtain the required vertical displacement measurements during the construction of mega-trusses and an edge truss, which are the primary structural members in a large-scale irregular building currently under construction. The measurement values confirm the validity of the proposed wireless displacement measurement system and its potential for use in safety evaluations of structural elements.

  6. A wireless laser displacement sensor node for structural health monitoring.

    Science.gov (United States)

    Park, Hyo Seon; Kim, Jong Moon; Choi, Se Woon; Kim, Yousok

    2013-09-30

    This study describes a wireless laser displacement sensor node that measures displacement as a representative damage index for structural health monitoring (SHM). The proposed measurement system consists of a laser displacement sensor (LDS) and a customized wireless sensor node. Wireless communication is enabled by a sensor node that consists of a sensor module, a code division multiple access (CDMA) communication module, a processor, and a power module. An LDS with a long measurement distance is chosen to increase field applicability. For a wireless sensor node driven by a battery, we use a power control module with a low-power processor, which facilitates switching between the sleep and active modes, thus maximizing the power consumption efficiency during non-measurement and non-transfer periods. The CDMA mode is also used to overcome the limitation of communication distance, which is a challenge for wireless sensor networks and wireless communication. To evaluate the reliability and field applicability of the proposed wireless displacement measurement system, the system is tested onsite to obtain the required vertical displacement measurements during the construction of mega-trusses and an edge truss, which are the primary structural members in a large-scale irregular building currently under construction. The measurement values confirm the validity of the proposed wireless displacement measurement system and its potential for use in safety evaluations of structural elements.

  7. Power management for energy harvesting wireless sensors

    Science.gov (United States)

    Arms, S. W.; Townsend, C. P.; Churchill, D. L.; Galbreath, J. H.; Mundell, S. W.

    2005-05-01

    The objective of this work was to demonstrate smart wireless sensing nodes capable of operation at extremely low power levels. These systems were designed to be compatible with energy harvesting systems using piezoelectric materials and/or solar cells. The wireless sensing nodes included a microprocessor, on-board memory, sensing means (1000 ohm foil strain gauge), sensor signal conditioning, 2.4 GHz IEEE 802.15.4 radio transceiver, and rechargeable battery. Extremely low power consumption sleep currents combined with periodic, timed wake-up was used to minimize the average power consumption. Furthermore, we deployed pulsed sensor excitation and microprocessor power control of the signal conditioning elements to minimize the sensors" average contribution to power draw. By sleeping in between samples, we were able to demonstrate extremely low average power consumption. At 10 Hz, current consumption was 300 microamps at 3 VDC (900 microwatts); at 5 Hz: 400 microwatts, at 1 Hz: 90 microwatts. When the RF stage was not used, but data were logged to memory, consumption was further reduced. Piezoelectric strain energy harvesting systems delivered ~2000 microwatts under low level vibration conditions. Output power levels were also measured from two miniature solar cells; which provided a wide range of output power (~100 to 1400 microwatts), depending on the light type & distance from the source. In summary, system power consumption may be reduced by: 1) removing the load from the energy harvesting & storage elements while charging, 2) by using sleep modes in between samples, 3) pulsing excitation to the sensing and signal conditioning elements in between samples, and 4) by recording and/or averaging, rather than frequently transmitting, sensor data.

  8. Security Attacks and its Countermeasures in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rajkumar,

    2014-10-01

    Full Text Available Wireless Sensor Networks have come to the forefront of the scientific community recently. Present WSNs typically communicate directly with a centralized controller or satellite. Going on the other hand, a smart WSN consists of a number of sensors spread across a geographical area; each sensor has wireless communication ability and sufficient intelligence for signal processing and networking of the data. This paper surveyed the different types of attacks, security related issues, and it’s Countermeasures with the complete comparison between Layer based Attacks in Wireless Sensor Network.

  9. EESA Algorithm in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Pei Zhang

    2014-04-01

    Full Text Available Since there are many problems of traditional extended clustering algorithm in wireless sensor network like short extended time, over energy consumption, too many deviated position the of cluster head nodes and so on, this paper proposes the EESA algorithm. The algorithm makes many improvements on the way of dividing clusters, strategy of electing the cluster head and construction method of data relay path, the two aspects of inter-cluster energy balance and energy balance among the cluster are taken into account at the same time. Detailed simulation results are taken in this thesis to compare network lifetime, average residual energy, energy consumption standard deviation of cluster head node and changes of average remaining energy between the EESA algorithm and ACT algorithm, EECA algorithm and MR-LEACH algorithm; the simulation results show that: the proposed algorithm reduces the load of hot regional cluster head, balances the energy consumption of the entire network nodes and extends the networks lifetime of wireless sensor

  10. Development of capacitance-based and impedance-based wireless sensors and sensor nodes for structural health monitoring applications

    Science.gov (United States)

    Mascarenas, David D. L.; Flynn, Eric B.; Todd, Michael D.; Overly, Timothy G.; Farinholt, Kevin M.; Park, Gyuhae; Farrar, Charles R.

    2010-06-01

    A field demonstration of a new and hybrid wireless sensing network paradigm for structural health monitoring (SHM) is presented. In this paradigm, both power and data interrogation commands are conveyed via a mobile agent that is sent to each sensor node to perform individual interrogations, which can alleviate several limitations of traditional sensing networks. This paper will discuss such prototype systems, which will be used to interrogate capacitive-based and impedance-based sensors for SHM applications. The capacitive-based wireless sensor node is specifically built to collect peak displacement measurements. In addition, a wireless sensor node for collecting electromechanical impedance data has also been developed. Both sensor nodes are specifically designed to accept various power sources and to be wirelessly triggered on an as-needed basis so that they can be used for the hybrid sensing network approach. The capabilities of these miniaturized and portable devices are demonstrated in the laboratory and the field, which was performed at the Alamosa Canyon Bridge in southern New Mexico.

  11. Mechanisms for Prolonging Network Lifetime in Wireless Sensor Networks

    Science.gov (United States)

    Yang, Yinying

    2010-01-01

    Sensors are used to monitor and control the physical environment. A Wireless Sensor Network (WSN) is composed of a large number of sensor nodes that are densely deployed either inside the phenomenon or very close to it [18][5]. Sensor nodes measure various parameters of the environment and transmit data collected to one or more sinks, using…

  12. Dynamic Session-Key Generation for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Chen Chin-Ling

    2008-01-01

    Full Text Available Abstract Recently, wireless sensor networks have been used extensively in different domains. For example, if the wireless sensor node of a wireless sensor network is distributed in an insecure area, a secret key must be used to protect the transmission between the sensor nodes. Most of the existing methods consist of preselecting keys from a key pool and forming a key chain. Then, the sensor nodes make use of the key chain to encrypt the data. However, while the secret key is being transmitted, it can easily be exposed during transmission. We propose a dynamic key management protocol, which can improve the security of the key juxtaposed to existing methods. Additionally, the dynamic update of the key can lower the probability of the key to being guessed correctly. In addition, with the new protocol, attacks on the wireless sensor network can be avoided.

  13. Deterministic Secure Positioning in Wireless Sensor Networks

    CERN Document Server

    Delaët, Sylvie; Rokicki, Mariusz; Tixeuil, Sébastien

    2007-01-01

    Properly locating sensor nodes is an important building block for a large subset of wireless sensor networks (WSN) applications. As a result, the performance of the WSN degrades significantly when misbehaving nodes report false location and distance information in order to fake their actual location. In this paper we propose a general distributed deterministic protocol for accurate identification of faking sensors in a WSN. Our scheme does \\emph{not} rely on a subset of \\emph{trusted} nodes that are not allowed to misbehave and are known to every node in the network. Thus, any subset of nodes is allowed to try faking its position. As in previous approaches, our protocol is based on distance evaluation techniques developed for WSN. On the positive side, we show that when the received signal strength (RSS) technique is used, our protocol handles at most $\\lfloor \\frac{n}{2} \\rfloor-2$ faking sensors. Also, when the time of flight (ToF) technique is used, our protocol manages at most $\\lfloor \\frac{n}{2} \\rfloor...

  14. Scaleable wireless web-enabled sensor networks

    Science.gov (United States)

    Townsend, Christopher P.; Hamel, Michael J.; Sonntag, Peter A.; Trutor, B.; Arms, Steven W.

    2002-06-01

    Our goal was to develop a long life, low cost, scalable wireless sensing network, which collects and distributes data from a wide variety of sensors over the internet. Time division multiple access was employed with RF transmitter nodes (each w/unique16 bit address) to communicate digital data to a single receiver (range 1/3 mile). One thousand five channel nodes can communicate to one receiver (30 minute update). Current draw (sleep) is 20 microamps, allowing 5 year battery life w/one 3.6 volt Li-Ion AA size battery. The network nodes include sensor excitation (AC or DC), multiplexer, instrumentation amplifier, 16 bit A/D converter, microprocessor, and RF link. They are compatible with thermocouples, strain gauges, load/torque transducers, inductive/capacitive sensors. The receiver (418 MHz) includes a single board computer (SBC) with Ethernet capability, internet file transfer protocols (XML/HTML), and data storage. The receiver detects data from specific nodes, performs error checking, records the data. The web server interrogates the SBC (from Microsoft's Internet Explorer or Netscape's Navigator) to distribute data. This system can collect data from thousands of remote sensors on a smart structure, and be shared by an unlimited number of users.

  15. Development of a Testbed for Wireless Underground Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mehmet C. Vuran

    2010-01-01

    Full Text Available Wireless Underground Sensor Networks (WUSNs constitute one of the promising application areas of the recently developed wireless sensor networking techniques. WUSN is a specialized kind of Wireless Sensor Network (WSN that mainly focuses on the use of sensors that communicate through soil. Recent models for the wireless underground communication channel are proposed but few field experiments were realized to verify the accuracy of the models. The realization of field WUSN experiments proved to be extremely complex and time-consuming in comparison with the traditional wireless environment. To the best of our knowledge, this is the first work that proposes guidelines for the development of an outdoor WUSN testbed with the goals of improving the accuracy and reducing of time for WUSN experiments. Although the work mainly aims WUSNs, many of the presented practices can also be applied to generic WSN testbeds.

  16. Cooperative distributed target tracking algorithm in mobile wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The paper proposes a cooperative distributed target tracking algorithm in mobile wireless sensor networks.There are two main components in the algorithm:distributed sensor-target assignment and sensor motion control.In the key idea of the sensor-target assignment,sensors are considered as autonomous agents and the defined objective function of each sensor concentrates on two fundamental factors:the tracking accuracy and the tracking cost.Compared with the centralized algorithm and the noncooperative distrib...

  17. A comprehensive survey of energy-aware routing protocols in wireless body area sensor networks.

    Science.gov (United States)

    Effatparvar, Mehdi; Dehghan, Mehdi; Rahmani, Amir Masoud

    2016-09-01

    Wireless body area sensor network is a special purpose wireless sensor network that, employing wireless sensor nodes in, on, or around the human body, makes it possible to measure biological parameters of a person for specific applications. One of the most fundamental concerns in wireless body sensor networks is accurate routing in order to send data promptly and properly, and therefore overcome some of the challenges. Routing protocols for such networks are affected by a large number of factors including energy, topology, temperature, posture, the radio range of sensors, and appropriate quality of service in sensor nodes. Since energy is highly important in wireless body area sensor networks, and increasing the network lifetime results in benefiting greatly from sensor capabilities, improving routing performance with reduced energy consumption presents a major challenge. This paper aims to study wireless body area sensor networks and the related routing methods. It also presents a thorough, comprehensive review of routing methods in wireless body area sensor networks from the perspective of energy. Furthermore, different routing methods affecting the parameter of energy will be classified and compared according to their advantages and disadvantages. In this paper, fundamental concepts of wireless body area sensor networks are provided, and then the advantages and disadvantages of these networks are investigated. Since one of the most fundamental issues in wireless body sensor networks is to perform routing so as to transmit data precisely and promptly, we discuss the same issue. As a result, we propose a classification of the available relevant literature with respect to the key challenge of energy in the routing process. With this end in view, all important papers published between 2000 and 2015 are classified under eight categories including 'Mobility-Aware', 'Thermal-Aware', 'Restriction of Location and Number of Relays', 'Link-aware', 'Cluster- and Tree

  18. Optimizing Retransmission Threshold in Wireless Sensor Networks.

    Science.gov (United States)

    Bi, Ran; Li, Yingshu; Tan, Guozhen; Sun, Liang

    2016-05-10

    The retransmission threshold in wireless sensor networks is critical to the latency of data delivery in the networks. However, existing works on data transmission in sensor networks did not consider the optimization of the retransmission threshold, and they simply set the same retransmission threshold for all sensor nodes in advance. The method did not take link quality and delay requirement into account, which decreases the probability of a packet passing its delivery path within a given deadline. This paper investigates the problem of finding optimal retransmission thresholds for relay nodes along a delivery path in a sensor network. The object of optimizing retransmission thresholds is to maximize the summation of the probability of the packet being successfully delivered to the next relay node or destination node in time. A dynamic programming-based distributed algorithm for finding optimal retransmission thresholds for relay nodes along a delivery path in the sensor network is proposed. The time complexity is O n Δ · max 1 ≤ i ≤ n { u i } , where u i is the given upper bound of the retransmission threshold of sensor node i in a given delivery path, n is the length of the delivery path and Δ is the given upper bound of the transmission delay of the delivery path. If Δ is greater than the polynomial, to reduce the time complexity, a linear programming-based ( 1 + p m i n ) -approximation algorithm is proposed. Furthermore, when the ranges of the upper and lower bounds of retransmission thresholds are big enough, a Lagrange multiplier-based distributed O ( 1 ) -approximation algorithm with time complexity O ( 1 ) is proposed. Experimental results show that the proposed algorithms have better performance.

  19. Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

    Directory of Open Access Journals (Sweden)

    Marjan Radi

    2012-01-01

    Full Text Available A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

  20. Multipath routing in wireless sensor networks: survey and research challenges.

    Science.gov (United States)

    Radi, Marjan; Dezfouli, Behnam; Abu Bakar, Kamalrulnizam; Lee, Malrey

    2012-01-01

    A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

  1. Target Localization Based on Improved DV-Hop Algorithm in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Xiaolong Huang

    2014-01-01

    Full Text Available The node localization technology of wireless sensor networks is essential and prerequisite to many applications, which it is one of the important support technologies for wireless sensor networks. The node localization is to get the position information of blind node by using location information of few known nodes and some special mechanisms. This paper primarily investigates a kind of target localization technology based on the improved DV-Hop algorithm in wireless sensor networks. We firstly compute the distances measured by RSSI and the mean value of one-hop distance. Then we can use the differences between the mean and the actual distance to get the error correction between the total distance and average one-hop distance. Replace trilateration with hybrid localization of MIN-MAX and weighted least square method. Finally, simulation experiment results show the improved algorithm can effectively carry out the network localization, thus has a certain of practical value

  2. Development of wireless sensor network for landslide monitoring system

    Science.gov (United States)

    Suryadi; Puranto, Prabowo; Adinanta, Hendra; Tohari, Adrin; Priambodo, Purnomo S.

    2017-05-01

    A wireless sensor network has been developed to monitor soil movement of some observed areas periodically. The system consists of four nodes and one gateway which installed on a scope area of 0.2 Km2. Each of nodehastwo types of sensor,an inclinometer and an extensometer. An inclinometer sensor is used to measure the tilt of a structure while anextensometer sensor is used to measure the displacement of soil movement. Each of nodeisalso supported by awireless communication device, a solar power supply unit, and a microcontroller unit called sensor module. In this system, there is also gateway module as a main communication system consistinga wireless communication device, power supply unit, and rain gauge to measure the rainfall intensity of the observed area. Each sensor of inclinometer and extensometer isconnected to the sensor module in wiring system but sensor module iscommunicating with gateway in a wireless system. Those four nodes are alsoconnectedeach other in a wireless system collecting the data from inclinometer and extensometer sensors. Module Gateway istransmitting the instruction code to each sensor module one by one and collecting the data from them. Gateway module is an important part to communicate with not only sensor modules but also to the server. This wireless system wasdesigned toreducethe electric consumption powered by 80 WP solar panel and 55Ah battery. This system has been implemented in Pangalengan, Bandung, which has high intensity of rainfall and it can be seen on the website.

  3. Chain-type wireless sensor network node scheduling strategy

    Institute of Scientific and Technical Information of China (English)

    Guangzhu Chen; Qingchun Meng; Lei Zhang

    2014-01-01

    In order to reduce power consumption of sensor nodes and extend network survival time in the wireless sensor network (WSN), sensor nodes are scheduled in an active or dormant mode. A chain-type WSN is fundamental y different from other types of WSNs, in which the sensor nodes are deployed along elongated geographic areas and form a chain-type network topo-logy structure. This paper investigates the node scheduling prob-lem in the chain-type WSN. Firstly, a node dormant scheduling mode is analyzed theoretical y from geographic coverage, and then three neighboring nodes scheduling criteria are proposed. Sec-ondly, a hybrid coverage scheduling algorithm and dead areas are presented. Final y, node scheduling in mine tunnel WSN with uniform deployment (UD), non-uniform deployment (NUD) and op-timal distribution point spacing (ODS) is simulated. The results show that the node scheduling with UD and NUD, especial y NUD, can effectively extend the network survival time. Therefore, a strat-egy of adding a few mobile nodes which activate the network in dead areas is proposed, which can further extend the network survival time by balancing the energy consumption of nodes.

  4. Multiple Traffic Control Using Wireless Sensor and Density Measuring Camera

    Directory of Open Access Journals (Sweden)

    Amrita RAI

    2008-07-01

    Full Text Available In the present scenario vehicular travel is increasing all over the world, especially in large urban areas. Therefore for simulating and optimizing traffic control to better accommodate this increasing demand is arises. In this paper we studied the optimization of traffic light controller in a City using wireless sensor and CCTV (Camera. We have proposed a traffic light controller and simulator that allows us to study different situation of traffic density in City and controlling the traffic of entire City by visual monitoring using CCTV. Using wireless sensor we can easily senses the density of traffic because the general architecture of wireless sensor network is an infrastructure less communication network.

  5. Security Analysis of Routing Protocols in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mohammad Sadeghi

    2012-01-01

    Full Text Available In this paper, I describe briefly some of the different types of attacks on wireless sensor networks such as Sybil, HELLO, Wormhole and Sinkhole attacks. Then I describe security analysis of some major routing protocols in wireless sensor network such as Directed Diffusion, TinyOS beaconing, geographic and Rumor routings in term of attacks and security goals. As a result I explain some secure routing protocols for wireless sensor network and is discussed briefly some methods and policy of these protocols to meet their security requirements. At last some simulation results of these protocols that have been done by their designer are mentioned.

  6. Wireless structural sensor made with frequency selective surface antenna

    Science.gov (United States)

    Jang, Sang-Dong; Kim, Jaehwan

    2012-04-01

    Nondestructive Structural health monitoring (SHM) system using wireless sensor network is the one of important issue for aerospace and civil engineering. Chipless passive wireless sensor system is one of novel methods for SHM which uses the electromagnetic wave characteristic change by geometrical change of electromagnetic resonators or impedance change of functional material sensing part without RFID chip. In this paper, the chipless passive wireless SHM sensor using frequency selective surface (FSS) is investigated. Electromagnetic characteristic change of FSS by mechanical strain or structural damage is investigated by simulation and experiment.

  7. Green Modulation in Proactive Wireless Sensor Networks

    CERN Document Server

    Abouei, Jamshid; Pasupathy, Subbarayan

    2009-01-01

    Due to unique characteristics of sensor nodes, choosing energy-efficient modulation scheme with low-complexity implementation (refereed to as green modulation) is a critical factor in the physical layer of Wireless Sensor Networks (WSNs). This paper presents (to the best of our knowledge) the first in-depth analysis of energy efficiency of various modulation schemes using realistic models in IEEE 802.15.4 standard and present state-of-the art technology, to find the best scheme in a proactive WSN over Rayleigh and Rician flat-fading channel models with path-loss. For this purpose, we describe the system model according to a pre-determined time-based process in practical sensor nodes. The present analysis also includes the effect of bandwidth and active mode duration on energy efficiency of popular modulation designs in the pass-band and Ultra-WideBand (UWB) categories. Experimental results show that among various pass-band and UWB modulation schemes, Non-Coherent M-ary Frequency Shift Keying (NC-MFSK) with sm...

  8. Clustering in Wireless Sensor Networks- A Survey

    Directory of Open Access Journals (Sweden)

    Sukhkirandeep Kaur

    2016-06-01

    Full Text Available Increased demand of Wireless Sensor Networks (WSN in various applications has made it a hot research area. Several challenges imposed which include energy conservation, scalability, limited network resources etc. with energy conservation being the most important. Clustering improves the energy efficiency by making high power nodes as cluster heads (CHs which reduces the chance of energy depletion of nodes. Scalability, fault tolerance, data aggregation, energy efficiency are some of the main objectives of clustering. This paper discusses various challenges associated with clustering and different methods or techniques developed to overcome these challenges. Various clustering approaches have been summarized and few prominent Quality of service (QoS based clustering routing protocols for WSN have been identified. Comparison of these approaches and protocols is discussed based on some parameters.

  9. Resilient networking in wireless sensor networks

    CERN Document Server

    Erdene-Ochir, Ochirkhand; Valois, Fabrice; Kountouris, Apostolos

    2010-01-01

    This report deals with security in wireless sensor networks (WSNs), especially in network layer. Multiple secure routing protocols have been proposed in the literature. However, they often use the cryptography to secure routing functionalities. The cryptography alone is not enough to defend against multiple attacks due to the node compromise. Therefore, we need more algorithmic solutions. In this report, we focus on the behavior of routing protocols to determine which properties make them more resilient to attacks. Our aim is to find some answers to the following questions. Are there any existing protocols, not designed initially for security, but which already contain some inherently resilient properties against attacks under which some portion of the network nodes is compromised? If yes, which specific behaviors are making these protocols more resilient? We propose in this report an overview of security strategies for WSNs in general, including existing attacks and defensive measures. In this report we focu...

  10. Node Clustering for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sania Bhatti

    2012-01-01

    Full Text Available Recent years have witnessed considerable growth in the development and deployment of clustering methods which are not only used to maintain network resources but also increases the reliability of the WSNs (Wireless Sensor Network and the facts manifest by the wide range of clustering solutions. Node clustering by selecting key parameters to tackle the dynamic behaviour of resource constraint WSN is a challenging issue. This paper highlights the recent progress which has been carried out pertaining to the development of clustering solutions for the WSNs. The paper presents classification of node clustering methods and their comparison based on the objectives, clustering criteria and methodology. In addition, the potential open issues which need to be considered for future work are high lighted.

  11. Wildfire safety with wireless sensor networks

    Directory of Open Access Journals (Sweden)

    Andrey Somov

    2011-11-01

    Full Text Available Nowadays, the Wireless Sensor Network (WSN paradigm is extensively used for the environmental monitoring including wildfires. Like other disasters, this phenomenon, if not detected early, may have grave consequences, e.g. a significant pecuniary loss, or even lead to human victims. This paper surveys the approaches to early wildfire detection using WSN facilities with a special focus on real deployments and hardware prototypes. In our work we propose not merely a description, but a classification of the fire detection methods which are divided into three groups: gas sensing, sensing of environmental parameters, and video monitoring. Then the methods are comparatively analyzed from the viewpoints of the cost, power consumption, and implementation complexity. Finally, we summarize our vision of the prospects of resolving the wildfire detection problem using WSNs.

  12. Sensor data security level estimation scheme for wireless sensor networks.

    Science.gov (United States)

    Ramos, Alex; Filho, Raimir Holanda

    2015-01-19

    Due to their increasing dissemination, wireless sensor networks (WSNs) have become the target of more and more sophisticated attacks, even capable of circumventing both attack detection and prevention mechanisms. This may cause WSN users, who totally trust these security mechanisms, to think that a sensor reading is secure, even when an adversary has corrupted it. For that reason, a scheme capable of estimating the security level (SL) that these mechanisms provide to sensor data is needed, so that users can be aware of the actual security state of this data and can make better decisions on its use. However, existing security estimation schemes proposed for WSNs fully ignore detection mechanisms and analyze solely the security provided by prevention mechanisms. In this context, this work presents the sensor data security estimator (SDSE), a new comprehensive security estimation scheme for WSNs. SDSE is designed for estimating the sensor data security level based on security metrics that analyze both attack prevention and detection mechanisms. In order to validate our proposed scheme, we have carried out extensive simulations that show the high accuracy of SDSE estimates.

  13. Sensor Data Security Level Estimation Scheme for Wireless Sensor Networks

    Science.gov (United States)

    Ramos, Alex; Filho, Raimir Holanda

    2015-01-01

    Due to their increasing dissemination, wireless sensor networks (WSNs) have become the target of more and more sophisticated attacks, even capable of circumventing both attack detection and prevention mechanisms. This may cause WSN users, who totally trust these security mechanisms, to think that a sensor reading is secure, even when an adversary has corrupted it. For that reason, a scheme capable of estimating the security level (SL) that these mechanisms provide to sensor data is needed, so that users can be aware of the actual security state of this data and can make better decisions on its use. However, existing security estimation schemes proposed for WSNs fully ignore detection mechanisms and analyze solely the security provided by prevention mechanisms. In this context, this work presents the sensor data security estimator (SDSE), a new comprehensive security estimation scheme for WSNs. SDSE is designed for estimating the sensor data security level based on security metrics that analyze both attack prevention and detection mechanisms. In order to validate our proposed scheme, we have carried out extensive simulations that show the high accuracy of SDSE estimates. PMID:25608215

  14. Survey of Security Technologies on Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Qiuwei Yang

    2015-01-01

    Full Text Available Because of their low cost and adaptability, wireless sensor networks are widely used in civil, military, and commercial fields and other fields. However, since the sensor node in the calculation of the capacity, battery capacity, and storage capacity are restricted by the limitations and inherent characteristics of the sensor networks, compared to traditional networks, which makes wireless sensor networks face more security threats. This paper summarized research progress of sensor network security issues as three aspects, key management, authentication, and secure routing, analyzed and commented on these results advantages and disadvantages and pointed out the future direction of the hot research field.

  15. Distributed Service Discovery for Heterogeneous Wireless Sensor Networks

    NARCIS (Netherlands)

    Marin-Perianu, R.S.; Scholten, J.; Havinga, P.J.M.

    2006-01-01

    Service discovery in heterogeneous Wireless Sensor Networks is a challenging research objective, due to the inherent limitations of sensor nodes and their extensive and dense deployment. The protocols proposed for ad hoc networks are too heavy for sensor environments. This paper presents a resourcea

  16. An energy efficient multipath routing algorithm for wireless sensor networks

    NARCIS (Netherlands)

    Dulman, Stefan; Wu, Jian; Havinga, Paul

    2003-01-01

    In this paper we introduce a new routing algorithm for wireless sensor networks. The aim of this algorithm is to provide on-demand multiple disjoint paths between a data source and a destination. Our Multipath On-Demand Routing Algorithm (MDR) improves the reliability of data routing in a wireless m

  17. Collaborative wireless sensor networks in industrial and business processes

    NARCIS (Netherlands)

    Marin-Perianu, Mihai

    2008-01-01

    Wireless Sensor Networks (WSNs) create the technological basis for building pervasive, large-scale distributed systems, which can sense their environment in great detail, communicate the relevant information via the wireless medium, reason collectively upon the observed situation and react according

  18. Software structure for broadband wireless sensor network system

    Science.gov (United States)

    Kwon, Hyeokjun; Oh, Sechang; Yoon, Hargsoon; Varadan, Vijay K.

    2010-04-01

    Zigbee Sensor Network system has been investigating for monitoring and analyzing the data measured from a lot of sensors because the Zigbee Sensor Network has several advantages of low power consumption, compact size, and multi-node connection. However, it has a disadvantage not to be able to monitor the data measured from sensors at the remote area such as other room that is located at other city. This paper describes the software structure to compensate the defect with combining the Zigbee Sensor Network and wireless LAN technology for remote monitoring of measured sensor data. The software structure has both benefits of Zigbee Sensor Network and the advantage of wireless LAN. The software structure has three main software structures. The first software structure consists of the function in order to acquire the data from sensors and the second software structure is to gather the sensor data through wireless Zigbee and to send the data to Monitoring system by using wireless LAN. The second part consists of Linux packages software based on 2440 CPU (Samsung corp.), which has ARM9 core. The Linux packages include bootloader, device drivers, kernel, and applications, and the applications are TCP/IP server program, the program interfacing with Zigbee RF module, and wireless LAN program. The last part of software structure is to receive the sensor data through TCP/IP client program from Wireless Gate Unit and to display graphically measured data by using MATLAB program; the sensor data is measured on 100Hz sampling rate and the measured data has 10bit data resolution. The wireless data transmission rate per each channel is 1.6kbps.

  19. On the Design and Implementation of Wireless Multimedia Sensor Networks

    Directory of Open Access Journals (Sweden)

    Qing Pang

    2010-09-01

    Full Text Available Wireless Sensor Networks (WSN mainly deal with scalar data such as temperature, humidity, and lightwhich are very suitable for low rate and low power IEEE 802.15 based networking technology. Thecommercial off-the-shelf (COTS CMOS camera has fostered researchers to push WSN a step further.The unique properties of multimedia data delivery pose fresh challenges for resource constrained sensornetworks. Transmitting raw data is very costly while limited processing power prevents sophisticatedmultimedia processing at the sensor nodes. Wireless sensor networks offer an attractive choice for lowcost solutions for transmitting data wirelessly to a database to be evaluated. Wireless networks of visualsensors have recently emerged as a new type of sensor-based intelligence system. The goal of the visualsensor network is to provide a user with visual information from an arbitrary viewpoint within themonitored field. Wireless networks in combination with image sensors open up a multitude of previouslyunthinkable sensing applications. In an on-going project, we are designing and implementing a sensornode with a camera which would be capable of acquiring still images, transfer the data onto a personalcomputer through wireless communication, and store the image on a personal computer. This paperexplains the process of capturing the raw image data with a camera sensor and the interfacing of thecamera with the Overo Air computer-on-module (COM. Camera visibility and resolution will also beexplained in this paper along with the procedure taken to configure the sensor node.

  20. New Wireless Sensors for Diagnostics Under Harsh Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High-temperature passive wireless surface acoustic wave (SAW) sensors are highly desirable for improving safety and efficiency in aviation and space vehicles. This...

  1. Helicopter Rotor Blade Monitoring using Autonomous Wireless Sensor Network

    NARCIS (Netherlands)

    Sanchez Ramirez, Andrea; Loendersloot, Richard; Tinga, Tiedo; Basu, B.

    2013-01-01

    The advancement on Wireless Sensor Networks for vibration monitoring presents important possibilities for helicopter rotor health and usage monitoring. While main rotor blades account for the main source of lift for helicopters, rotor induced vibration establishes an important source for

  2. Passive Wireless Sensor System for Structural Health Monitoring Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Albido proposes to develop a Passive Wireless Sensor System for Structural Health Monitoring capable of measuring high-bandwidth temperature and strain of space and...

  3. A Study on Wireless Charging for Prolonging the Lifetime of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Weijian Tu

    2017-07-01

    Full Text Available Wireless charging is an important issue in wireless sensor networks, since it can provide an emerging and effective solution in the absence of other power supplies. The state-of-the-art methods employ a mobile car and a predefined moving path to charge the sensor nodes in the network. Previous studies only consider a factor of the network (i.e., residual energy of sensor node as a constraint to design the wireless charging strategy. However, other factors, such as the travelled distance of the mobile car, can also affect the effectiveness of wireless charging strategy. In this work, we study wireless charging strategy based on the analysis of a combination of two factors, including the residual energy of sensor nodes and the travelled distance of the charging car. Firstly, we theoretically analyze the limited size of the sensor network to match the capability of a charging car. Then, the networked factors are selected as the weights of traveling salesman problem (TSP to design the moving path of the charging car. Thirdly, the charging time of each sensor node is computed based on the linear programming problem for the charging car. Finally, a charging period for the network is studied. The experimental results show that the proposed approach can significantly maximize the lifetime of the wireless sensor network.

  4. A Power Balance Aware Wireless Charger Deployment Method for Complete Coverage in Wireless Rechargeable Sensor Networks

    Directory of Open Access Journals (Sweden)

    Tu-Liang Lin

    2016-08-01

    Full Text Available Traditional sensor nodes are usually battery powered, and the limited battery power constrains the overall lifespan of the sensors. Recently, wireless power transmission technology has been applied in wireless sensor networks (WSNs to transmit wireless power from the chargers to the sensor nodes and solve the limited battery power problem. The combination of wireless sensors and wireless chargers forms a new type of network called wireless rechargeable sensor networks (WRSNs. In this research, we focus on how to effectively deploy chargers to maximize the lifespan of a network. In WSNs, the sensor nodes near the sink consume more power than nodes far away from the sink because of frequent data forwarding. This important power unbalanced factor has not been considered, however, in previous charger deployment research. In this research, a power balance aware deployment (PBAD method is proposed to address the power unbalance in WRSNs and to design the charger deployment with maximum charging efficiency. The proposed deployment method is effectively aware of the existence of the sink node that would cause unbalanced power consumption in WRSNs. The simulation results show that the proposed PBAD algorithm performs better than other deployment methods, and fewer chargers are deployed as a result.

  5. A Study on Wireless Charging for Prolonging the Lifetime of Wireless Sensor Networks.

    Science.gov (United States)

    Tu, Weijian; Xu, Xianghua; Ye, Tingcong; Cheng, Zongmao

    2017-07-04

    Wireless charging is an important issue in wireless sensor networks, since it can provide an emerging and effective solution in the absence of other power supplies. The state-of-the-art methods employ a mobile car and a predefined moving path to charge the sensor nodes in the network. Previous studies only consider a factor of the network (i.e., residual energy of sensor node) as a constraint to design the wireless charging strategy. However, other factors, such as the travelled distance of the mobile car, can also affect the effectiveness of wireless charging strategy. In this work, we study wireless charging strategy based on the analysis of a combination of two factors, including the residual energy of sensor nodes and the travelled distance of the charging car. Firstly, we theoretically analyze the limited size of the sensor network to match the capability of a charging car. Then, the networked factors are selected as the weights of traveling salesman problem (TSP) to design the moving path of the charging car. Thirdly, the charging time of each sensor node is computed based on the linear programming problem for the charging car. Finally, a charging period for the network is studied. The experimental results show that the proposed approach can significantly maximize the lifetime of the wireless sensor network.

  6. 一种多信道混合方式的无线传感器网络MAC协议%A multichannel hybrid MAC protocol for wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    In order to improve wireless sensor networks throughput and reduce time delay, a multichannel MAC protocol called MCHMAC is designed, which use contention based and scheduled based hybrid access mechanism to transmit information, the energy is saved by dynamically adjusts the active and sleep time of nodes. MCHMAC use channel state estimation algorithm to evaluate channel, it also proposes to find a best channel by a channel schedule table for nodes. Experimental results show that this protocol improves the throughput and reduces the network delay.%  为了提高无线传感器网络的吞吐量,降低时延,本文设计了一种多信道MAC协议——MCHMAC。它采用调度和竞争访问机制相结的混合方式来传输信息,通过动态调整节点的活跃与睡眠状态的时长来节省能量。MCHMAC使用信道状态估计算法对信道进行评估,利用信道调度表来为节点调度状态最优的信道。仿真实验结果证明,本协议提高了吞吐量,降低了网络时延。

  7. Routing Security Issues in Wireless Sensor Networks: Attacks and Defenses

    CERN Document Server

    Sen, Jaydip

    2011-01-01

    Wireless Sensor Networks (WSNs) are rapidly emerging as an important new area in wireless and mobile computing research. Applications of WSNs are numerous and growing, and range from indoor deployment scenarios in the home and office to outdoor deployment scenarios in adversary's territory in a tactical battleground (Akyildiz et al., 2002). For military environment, dispersal of WSNs into an adversary's territory enables the detection and tracking of enemy soldiers and vehicles. For home/office environments, indoor sensor networks offer the ability to monitor the health of the elderly and to detect intruders via a wireless home security system. In each of these scenarios, lives and livelihoods may depend on the timeliness and correctness of the sensor data obtained from dispersed sensor nodes. As a result, such WSNs must be secured to prevent an intruder from obstructing the delivery of correct sensor data and from forging sensor data. To address the latter problem, end-to-end data integrity checksums and pos...

  8. Distributed estimation of sensors position in underwater wireless sensor network

    Science.gov (United States)

    Zandi, Rahman; Kamarei, Mahmoud; Amiri, Hadi

    2016-05-01

    In this paper, a localisation method for determining the position of fixed sensor nodes in an underwater wireless sensor network (UWSN) is introduced. In this simple and range-free scheme, the node localisation is achieved by utilising an autonomous underwater vehicle (AUV) that transverses through the network deployment area, and that periodically emits a message block via four directional acoustic beams. A message block contains the actual known AUV position as well as a directional dependent marker that allows a node to identify the respective transmit beam. The beams form a fixed angle with the AUV body. If a node passively receives message blocks, it could calculate the arithmetic mean of the coordinates existing in each messages sequence, to find coordinates at two different time instants via two different successive beams. The node position can be derived from the two computed positions of the AUV. The major advantage of the proposed localisation algorithm is that it is silent, which leads to energy efficiency for sensor nodes. The proposed method does not require any synchronisation among the nodes owing to being silent. Simulation results, using MATLAB, demonstrated that the proposed method had better performance than other similar AUV-based localisation methods in terms of the rates of well-localised sensor nodes and positional root mean square error.

  9. Wireless Sensor Networks Formation: Approaches and Techniques

    Directory of Open Access Journals (Sweden)

    Miriam Carlos-Mancilla

    2016-01-01

    Full Text Available Nowadays, wireless sensor networks (WSNs emerge as an active research area in which challenging topics involve energy consumption, routing algorithms, selection of sensors location according to a given premise, robustness, efficiency, and so forth. Despite the open problems in WSNs, there are already a high number of applications available. In all cases for the design of any application, one of the main objectives is to keep the WSN alive and functional as long as possible. A key factor in this is the way the network is formed. This survey presents most recent formation techniques and mechanisms for the WSNs. In this paper, the reviewed works are classified into distributed and centralized techniques. The analysis is focused on whether a single or multiple sinks are employed, nodes are static or mobile, the formation is event detection based or not, and network backbone is formed or not. We focus on recent works and present a discussion of their advantages and drawbacks. Finally, the paper overviews a series of open issues which drive further research in the area.

  10. Sleep Control Game for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sang Hoon Lee

    2016-01-01

    Full Text Available In wireless sensor networks (WSNs, each node controls its sleep to reduce energy consumption without sacrificing message latency. In this paper we apply the game theory, which is a powerful tool that explains how each individual acts for his or her own economic benefit, to analyze the optimal sleep schedule for sensor nodes. We redefine this sleep control game as a modified version of the Prisoner’s Dilemma. In the sleep control game, each node decides whether or not it wakes up for the cycle. Payoff functions of the sleep control game consider the expected traffic volume, network conditions, and the expected packet delay. According to the payoff function, each node selects the best wake-up strategy that may minimize the energy consumption and maintain the latency performance. To investigate the performance of our algorithm, we apply the sleep control game to X-MAC, which is one of the recent WSN MAC protocols. Our detailed packet level simulations confirm that the proposed algorithm can effectively reduce the energy consumption by removing unnecessary wake-up operations without loss of the latency performance.

  11. Fast notification architecture for wireless sensor networks

    Science.gov (United States)

    Lee, Dong-Hahk

    2013-03-01

    In an emergency, since it is vital to transmit the message to the users immediately after analysing the data to prevent disaster, this article presents the deployment of a fast notification architecture for a wireless sensor network. The sensor nodes of the proposed architecture can monitor an emergency situation periodically and transmit the sensing data, immediately to the sink node. We decide on the grade of fire situation according to the decision rule using the sensing values of temperature, CO, smoke density and temperature increasing rate. On the other hand, to estimate the grade of air pollution, the sensing data, such as dust, formaldehyde, NO2, CO2, is applied to the given knowledge model. Since the sink node in the architecture has a ZigBee interface, it can transmit the alert messages in real time according to analysed results received from the host server to the terminals equipped with a SIM card-type ZigBee module. Also, the host server notifies the situation to the registered users who have cellular phone through short message service server of the cellular network. Thus, the proposed architecture can adapt an emergency situation dynamically compared to the conventional architecture using video processing. In the testbed, after generating air pollution and fire data, the terminal receives the message in less than 3 s. In the test results, this system can also be applied to buildings and public areas where many people gather together, to prevent unexpected disasters in urban settings.

  12. Application of wireless sensor network technology in logistics information system

    Science.gov (United States)

    Xu, Tao; Gong, Lina; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

    2017-04-01

    This paper introduces the basic concepts of active RFID (WSN-ARFID) based on wireless sensor networks and analyzes the shortcomings of the existing RFID-based logistics monitoring system. Integrated wireless sensor network technology and the scrambling point of RFID technology. A new real-time logistics detection system based on WSN and RFID, a model of logistics system based on WSN-ARFID is proposed, and the feasibility of this technology applied to logistics field is analyzed.

  13. Coverage and Connectivity Issue in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rachit Trivedi

    2013-04-01

    Full Text Available Wireless sensor networks (WSNs are an emerging area of interest in research and development. It finds use in military surveillance, health care, environmental monitoring, forest fire detection and smart environments. An important research issue in WSNs is the coverage since cost, area and lifetime are directly validated to it.In this paper we present an overview of WSNs and try to refine the coverage and connectivity issues in wireless sensor networks.

  14. A Survey of Encroachment Disclosure in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Sushma J. Gaurkar

    2013-02-01

    Full Text Available In wireless sensor network (WSN security is the major issuebecause of its hostile nature. The traditional intrusion detectiontechnique and traditional access control will not providereliability and security if they do not work cooperatively. If thesecurity is compromised, there could be serious consequencesstarting from theft of information, loss of privacy and reachingeven bankruptcy of that institution. In this paper a brief surveyon some recent intrusion detection technique & access controlmechanism in wireless sensor network is presented anddiscusses them in detail.

  15. Energy Monitoring and Management Mechanism for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Papadakis Andreas

    2016-01-01

    Full Text Available In this work we discuss a mechanism for the monitoring and management of energy consumption in Wireless Sensor Networks. We consider that the Wireless Sensor Network consists of nodes that operate individually and collaborate with each other. After briefly discussing the typical network topologies and associating with the expected communications needs, we describe a conceptual framework for monitoring and managing the energy consumption on per process basis.

  16. Coverage and Connectivity Issue in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rachit Trivedi

    2013-04-01

    Full Text Available Wireless sensor networks (WSNs are an emerging area of interest in research and development. It finds use in military surveillance, health care, environmental monitoring, forest fire detection and smart environments. An important research issue in WSNs is the coverage since cost, area and lifetime are directly validated to it.In this paper we present an overview of WSNs and try to refine the coverage and connectivity issues in wireless sensor networks.

  17. On the Capacity of Hybrid Wireless Networks with Opportunistic Routing

    Directory of Open Access Journals (Sweden)

    Tan Le

    2010-01-01

    Full Text Available This paper studies the capacity of hybrid wireless networks with opportunistic routing (OR. We first extend the opportunistic routing algorithm to exploit high-speed data transmissions in infrastructure network through base stations. We then develop linear programming models to calculate the end-to-end throughput bounds from multiple source nodes to single as well as multiple destination nodes. The developed models are applied to study several hybrid wireless network examples. Through case studies, we investigate several factors that have significant impacts on the hybrid wireless network capacity under opportunistic routing, such as node transmission range, density and distribution pattern of base stations (BTs, and number of wireless channels on wireless nodes and base stations. Our numerical results demonstrate that opportunistic routing could achieve much higher throughput on both ad hoc and hybrid networks than traditional unicast routing (UR. Moreover, opportunistic routing can efficiently utilize base stations and achieve significantly higher throughput gains in hybrid wireless networks than in pure ad hoc networks especially with multiple-channel base stations.

  18. Key management schemes using routing information frames in secure wireless sensor networks

    Science.gov (United States)

    Kamaev, V. A.; Finogeev, A. G.; Finogeev, A. A.; Parygin, D. S.

    2017-01-01

    The article considers the problems and objectives of key management for data encryption in wireless sensor networks (WSN) of SCADA systems. The structure of the key information in the ZigBee network and methods of keys obtaining are discussed. The use of a hybrid key management schemes is most suitable for WSN. The session symmetric key is used to encrypt the sensor data, asymmetric keys are used to encrypt the session key transmitted from the routing information. Three algorithms of hybrid key management using routing information frames determined by routing methods and the WSN topology are presented.

  19. Wireless Sensors and Networks for Advanced Energy Management

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, J.E.

    2005-05-06

    Numerous national studies and working groups have identified low-cost, very low-power wireless sensors and networks as a critical enabling technology for increasing energy efficiency, reducing waste, and optimizing processes. Research areas for developing such sensor and network platforms include microsensor arrays, ultra-low power electronics and signal conditioning, data/control transceivers, and robust wireless networks. A review of some of the research in the following areas will be discussed: (1) Low-cost, flexible multi-sensor array platforms (CO{sub 2}, NO{sub x}, CO, humidity, NH{sub 3}, O{sub 2}, occupancy, etc.) that enable energy and emission reductions in applications such as buildings and manufacturing; (2) Modeling investments (energy usage and savings to drive capital investment decisions) and estimated uptime improvements through pervasive gathering of equipment and process health data and its effects on energy; (3) Robust, self-configuring wireless sensor networks for energy management; and (4) Quality-of-service for secure and reliable data transmission from widely distributed sensors. Wireless communications is poised to support technical innovations in the industrial community, with widespread use of wireless sensors forecasted to improve manufacturing production and energy efficiency and reduce emissions. Progress being made in wireless system components, as described in this paper, is helping bring these projected improvements to reality.

  20. Energy-efficient multipath routing in wireless sensor network considering wireless interference

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Due to the energy and resource constraints of a wireless sensor node in a wireless sensor network (WSN), design of energy-efficient multipath routing protocols is a crucial concern for WSN applications. To provide high-quality monitoring information, many WSN applications require high-rate data transmission. Multipath routing protocols are often used to increase the network transmission rate and throughput. Although large-scale WSN can be supported by high bandwidth backbone network, the WSN remains the bot...

  1. Approach to sensor node calibration for efficient localisation in wireless sensor networks in realistic scenarios

    CSIR Research Space (South Africa)

    Mwila, MK

    2014-06-01

    Full Text Available Conference on Ambient Systems, Networks and Technologies (ANT-2014) Approach to Sensor Node Calibration for Efficient Localisation in Wireless Sensor Networks in Realistic Scenarios Martin K. Mwilaa, Karim Djouanib, Anish Kurienc,∗ a...

  2. High-Temperature SAW Wireless Strain Sensor with Langasite

    OpenAIRE

    Lin Shu; Bin Peng; Zhengbing Yang; Rui Wang; Senyang Deng; Xingzhao Liu

    2015-01-01

    Two Surface acoustic wave (SAW) resonators were fabricated on langasite substrates with Euler angle of (0°, 138.5°, 117°) and (0°, 138.5°, 27°). A dipole antenna was bonded to the prepared SAW resonator to form a wireless sensor. The characteristics of the SAW sensors were measured by wireless frequency domain interrogation methods from 20 °C to 600 °C. Different temperature behaviors of the sensors were observed. Strain sensing was achieved using a cantilever configuration. The sensors were ...

  3. A wireless and passive low-pressure sensor.

    Science.gov (United States)

    Nicolay, Pascal; Lenzhofer, Martin

    2014-02-17

    This paper will discuss the results obtained with a first prototype of a completely passive and wireless low pressure sensor. The device is a heat conductivity gauge, based on a wireless and passive SAW temperature sensor. The required heating energy is applied to the sensor using inductive coupling. The prototype was successfully tested in a vacuum chamber. Its equilibrium temperature changed drastically and in a reproducible way when pressure steps were applied. However, the response time was very long. A model is provided to account for the sensor's behavior. It is then used to show that the response time could be strongly improved using basic design improvements. Further possible improvements are discussed.

  4. Protocols for Wireless Sensor Networks and Its Security

    Directory of Open Access Journals (Sweden)

    Dr. Adil Jamil Zaru

    2016-12-01

    Full Text Available This paper proposes a protocol for Wireless Sensor Networks and its security which are characterized by severely constrained computational and energy resources, and an ad hoc operational environment. The paper first introduces sensor networks, and discusses security issues and goals along with security problems, threats, and risks in sensor networks. It describes crippling attacks against all of them and suggests countermeasures and design considerations. It gives a brief introduction of proposed security protocol SPINS whose building blocks are SNEP and μTESLA which overcome all the important security threats and problems and achieves security goals like data confidentiality, freshness, authentication in order to provide a secure Wireless Sensor Network.

  5. An Extended Hierarchical Trusted Model for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    DU Ruiying; XU Mingdi; ZHANG Huanguo

    2006-01-01

    Cryptography and authentication are traditional approach for providing network security. However, they are not sufficient for solving the problems which malicious nodes compromise whole wireless sensor network leading to invalid data transmission and wasting resource by using vicious behaviors. This paper puts forward an extended hierarchical trusted architecture for wireless sensor network, and establishes trusted congregations by three-tier framework. The method combines statistics, economics with encrypt mechanism for developing two trusted models which evaluate cluster head nodes and common sensor nodes respectively. The models form logical trusted-link from command node to common sensor nodes and guarantees the network can run in secure and reliable circumstance.

  6. Time synchronization in ad-hoc wireless sensor networks

    Science.gov (United States)

    Sharma, Nishant

    2013-06-01

    Advances in micro-electronics and developments in the various technologies have given birth to this era of wireless sensor networks. A sensor network is the one which provides information about the surrounding environment by sensing it and clock synchronization in wireless sensor networks plays a vital role to maintain the integrity of entire network. In this paper two major low energy consumption clock synchronization algorithms, Reference Broadcast Synchronization (RBS) and Timing-Sync Protocol for Sensor Networks (TPSN) are simulated, which result in high level of accuracy, reliability, handles substantially greater node densities, supports mobility, and hence perform well under all possible conditions.

  7. 1-Bit Compressive Data Gathering for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Jiping Xiong

    2014-01-01

    Full Text Available Compressive sensing (CS has been widely used in wireless sensor networks for the purpose of reducing the data gathering communication overhead in recent years. In this paper, we firstly apply 1-bit compressive sensing to wireless sensor networks to further reduce the communication overhead that each sensor needs to send. Furthermore, we propose a novel blind 1-bit CS reconstruction algorithm which outperforms other state-of-the-art blind 1-bit CS reconstruction algorithms under the settings of WSN. Experimental results on real sensor datasets demonstrate the efficiency of our method.

  8. Virtual View Image over Wireless Visual Sensor Network

    Directory of Open Access Journals (Sweden)

    Gamantyo Hendrantoro

    2011-12-01

    Full Text Available In general, visual sensors are applied to build virtual view images. When number of visual sensors increases then quantity and quality of the information improves. However, the view images generation is a challenging task in Wireless Visual Sensor Network environment due to energy restriction, computation complexity, and bandwidth limitation. Hence this paper presents a new method of virtual view images generation from selected cameras on Wireless Visual Sensor Network. The aim of the paper is to meet bandwidth and energy limitations without reducing information quality. The experiment results showed that this method could minimize number of transmitted imageries with sufficient information.

  9. A Novel Re-keying Function Protocol (NRFP For Wireless Sensor Network Security

    Directory of Open Access Journals (Sweden)

    Naif Alsharabi

    2008-12-01

    Full Text Available This paper describes a novel re-keying function protocol (NRFP for wireless sensor network security. A re-keying process management system for sensor networks is designed to support in-network processing. The design of the protocol is motivated by decentralization key management for wireless sensor networks (WSNs, covering key deployment, key refreshment, and key establishment. NRFP supports the establishment of novel administrative functions for sensor nodes that derive/re-derive a session key for each communication session. The protocol proposes direct connection, in-direct connection and hybrid connection. NRFP also includes an efficient protocol for local broadcast authentication based on the use of one-way key chains. A salient feature of the authentication protocol is that it supports source authentication without precluding in-network processing. Security and performance analysis shows that it is very efficient in computation, communication and storage and, that NRFP is also effective in defending against many sophisticated attacks.

  10. Survey on Routing Protocol in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    R.Devika

    2013-02-01

    Full Text Available The Wireless Sensor Network (WSN is a wireless network consisting of ten to thousand small nodes with sensing, computing and wireless communication capabilities. WSN are generally used to monitor activities and report events, such as fire, overheating etc. in a specific area or environment. It routs data back to the Base Station (BS. Data transmission is usually a multi-hop from node to nodetowards the BS. Sensor nodes are limited in power, computational and communication bandwidth. Primary goal of researchers is to find the energy efficient routing protocol. This study highlights the different routing protocol with advantages and limitations.

  11. Wireless Sensor Node for Surface Seawater Density Measurements

    Directory of Open Access Journals (Sweden)

    Roberto Saletti

    2012-03-01

    Full Text Available An electronic meter to measure surface seawater density is presented. It is based on the measurement of the difference in displacements of a surface level probe and a weighted float, which according to Archimedes’ law depends on the density of the water. The displacements are simultaneously measured using a high-accuracy magnetostrictive sensor, to which a custom electronic board provides a wireless connection and power supply so that it can become part of a wireless sensor network. The electronics are designed so that different kinds of wireless networks can be used, by simply changing the wireless module and the relevant firmware of the microcontroller. Lastly, laboratory and at-sea tests are presented and discussed in order to highlight the functionality and the performance of a prototype of the wireless density meter node in a Bluetooth radio network. The experimental results show a good agreement of the values of the calculated density compared to reference hydrometer readings.

  12. An Efficient Management System for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mei-Yu Lee

    2010-12-01

    Full Text Available Wireless sensor networks have garnered considerable attention recently. Networks typically have many sensor nodes, and are used in commercial, medical, scientific, and military applications for sensing and monitoring the physical world. Many researchers have attempted to improve wireless sensor network management efficiency. A Simple Network Management Protocol (SNMP-based sensor network management system was developed that is a convenient and effective way for managers to monitor and control sensor network operations. This paper proposes a novel WSNManagement system that can show the connections stated of relationships among sensor nodes and can be used for monitoring, collecting, and analyzing information obtained by wireless sensor networks. The proposed network management system uses collected information for system configuration. The function of performance analysis facilitates convenient management of sensors. Experimental results show that the proposed method enhances the alive rate of an overall sensor node system, reduces the packet lost rate by roughly 5%, and reduces delay time by roughly 0.2 seconds. Performance analysis demonstrates that the proposed system is effective for wireless sensor network management.

  13. An efficient management system for wireless sensor networks.

    Science.gov (United States)

    Ma, Yi-Wei; Chen, Jiann-Liang; Huang, Yueh-Min; Lee, Mei-Yu

    2010-01-01

    Wireless sensor networks have garnered considerable attention recently. Networks typically have many sensor nodes, and are used in commercial, medical, scientific, and military applications for sensing and monitoring the physical world. Many researchers have attempted to improve wireless sensor network management efficiency. A Simple Network Management Protocol (SNMP)-based sensor network management system was developed that is a convenient and effective way for managers to monitor and control sensor network operations. This paper proposes a novel WSNManagement system that can show the connections stated of relationships among sensor nodes and can be used for monitoring, collecting, and analyzing information obtained by wireless sensor networks. The proposed network management system uses collected information for system configuration. The function of performance analysis facilitates convenient management of sensors. Experimental results show that the proposed method enhances the alive rate of an overall sensor node system, reduces the packet lost rate by roughly 5%, and reduces delay time by roughly 0.2 seconds. Performance analysis demonstrates that the proposed system is effective for wireless sensor network management.

  14. Analysis of k-Coverage in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Rasmi Ranjan Patra

    2011-09-01

    Full Text Available Recently, a concept of wireless sensor networks has attracted much attention due to its wide-range of potential applications. Wireless sensor networks also pose a number of challenging optimization problems. One of the fundamental problems in sensor networks is the coverage problem, which reflects the quality of service that can be provided by a particular sensor network. The coverage concept is depending from several points of view due to a variety of sensors and a wide-range of their applications. One fundamental issue in sensor networks is the coverage problem, which reflects how well a sensor network is monitored or tracked by sensors. In this paper, we formulate this problem as a decision problem, whose goal is to determine the degree of coverage of a sensor network, which is covered by at least k sensors, where k is a predefined value. The sensing ranges of sensors can be same or different. Performance evaluation of our protocol indicates that degree of coverage of wireless sensor networks can be determined within small period of time. Therefore energy consumption of the sensor networks can be minimized.

  15. Virtualization in Wireless Sensor Network: Challenges and Opportunities

    Directory of Open Access Journals (Sweden)

    Md. Motaharul Islam

    2012-03-01

    Full Text Available Wireless Sensor Networks (WSNs are gaining importance for their broad range of commercial applications such as in home automation, health-care and industrial automation. In these applications multi-vendor and heterogeneous sensor nodes are deployed. Due to strict administrative control over the WSN domains, communication barrier, conflicting goal & economic interest of different vendors of sensor node in WSN make it difficult to introduce a large scale federated WSN. By allowing heterogeneous wireless sensor networks to coexist on a shared physical substrate, virtualization in sensor network may provide flexibility, promote diversity, ensure security and increase manageability. This paper surveys the novel approach of using the large scale federated WSN resources in a sensor virtualization environment. In this paper we propose sensor virtualization architecture and focus on the challenges and opportunities of research in the field of sensor network virtualization as well as to illustrate a picture of current researches in this field.

  16. The Radio Frequency Health Node Wireless Sensor System

    Science.gov (United States)

    Valencia, J. Emilio; Stanley, Priscilla C.; Mackey, Paul J.

    2009-01-01

    The Radio Frequency Health Node (RFHN) wireless sensor system differs from other wireless sensor systems in ways originally intended to enhance utility as an instrumentation system for a spacecraft. The RFHN can also be adapted to use in terrestrial applications in which there are requirements for operational flexibility and integrability into higher-level instrumentation and data acquisition systems. As shown in the figure, the heart of the system is the RFHN, which is a unit that passes commands and data between (1) one or more commercially available wireless sensor units (optionally, also including wired sensor units) and (2) command and data interfaces with a local control computer that may be part of the spacecraft or other engineering system in which the wireless sensor system is installed. In turn, the local control computer can be in radio or wire communication with a remote control computer that may be part of a higher-level system. The remote control computer, acting via the local control computer and the RFHN, cannot only monitor readout data from the sensor units but can also remotely configure (program or reprogram) the RFHN and the sensor units during operation. In a spacecraft application, the RFHN and the sensor units can also be configured more nearly directly, prior to launch, via a serial interface that includes an umbilical cable between the spacecraft and ground support equipment. In either case, the RFHN wireless sensor system has the flexibility to be configured, as required, with different numbers and types of sensors for different applications. The RFHN can be used to effect realtime transfer of data from, and commands to, the wireless sensor units. It can also store data for later retrieval by an external computer. The RFHN communicates with the wireless sensor units via a radio transceiver module. The modular design of the RFHN makes it possible to add radio transceiver modules as needed to accommodate additional sets of wireless sensor

  17. Ninth International Conference on Wireless Communication and Sensor Networks

    CERN Document Server

    Tiwari, Murlidhar; Arora, Anish

    2014-01-01

    Wireless communication and sensor networks would form the backbone to create pervasive and ubiquitous environments that would have profound influence on the society and thus are important to the society. The wireless communication technologies and wireless sensor networks would encompass a wide range of domains such as HW devices such as motes, sensors and associated instrumentation, actuators, transmitters, receivers, antennas, etc., sensor network aspects such as topologies, routing algorithms, integration of heterogeneous network elements and topologies, designing RF devices and systems for energy efficiency and reliability etc. These sensor networks would provide opportunity to continuously and in a distributed manner monitor the environment and generate the necessary warnings and actions. However most of the developments have been demonstrated only in controlled and laboratory environments. So we are yet to see those powerful, ubiquitous applications for the benefit of the society. The conference and con...

  18. A wireless soil moisture sensor powered by solar energy.

    Science.gov (United States)

    Jiang, Mingliang; Lv, Mouchao; Deng, Zhong; Zhai, Guoliang

    2017-01-01

    In a variety of agricultural activities, such as irrigation scheduling and nutrient management, soil water content is regarded as an essential parameter. Either power supply or long-distance cable is hardly available within field scale. For the necessity of monitoring soil water dynamics at field scale, this study presents a wireless soil moisture sensor based on the impedance transform of the frequency domain. The sensor system is powered by solar energy, and the data can be instantly transmitted by wireless communication. The sensor electrodes are embedded into the bottom of a supporting rod so that the sensor can measure soil water contents at different depths. An optimal design with time executing sequence is considered to reduce the energy consumption. The experimental results showed that the sensor is a promising tool for monitoring moisture in large-scale farmland using solar power and wireless communication.

  19. Performance Evaluation and Optimization of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Dr Jayant Dubey

    2013-06-01

    Full Text Available A wireless sensor network (WSN is an ad-hoc network composed of small sensor nodes deployed in large numbers to sense the physical world. Wireless sensor networks have very broad application prospects including both military and civilian usage. They include surveillance, tracking at critical facilities, or monitoring animal habitats. Sensor networks have the potential to radically change the way people observe and interact with their environment. With current wireless sensor network technology, people will gain advanced knowledge of physical and social systems, and the advent of a ubiquitous sensing era is coming. In-network processing or data aggregation is an essential function of WSNs to collect raw sensory data and get aggregated statistics about the measured environment, and help queries capture the major feature or changes of the measured systems. As more and more applications of WSNs collect sensitive measurements of people’s everyday life, privacy and security concerns draw more and more attention. If privacy of sensory content is not preserved, it is not feasible to deploy the WSNs for information collection. On the other hand, if integrity of the collected sensory information is not protected, no queries or users can trust and/or use the collected information. Hence, two important issues should be addressed before wireless sensor network systems can realize their promise in civilian applications: (1 protect data privacy, so the deployment of the wireless sensor network systems is feasible; (2 enforce integrity, so users can trust the collected or aggregated information.

  20. Design and performance of wireless sensors for structural health monitoring

    Science.gov (United States)

    Watters, D. G.; Jayaweera, P.; Bahr, A. J.; Huestis, D. L.

    2002-05-01

    Wireless sensors can be realized by integrating a sensor with a passive commercial radio-frequency identification (RFID) chip. When activated, the chip responds with a digitally encoded signal that not only identifies the sensor but also contains information about the sensor state. Two devices have been developed to date: a temperature-threshold indicator and a chloride-threshold indicator. This paper discusses basic concepts, design issues, and preliminary performance.

  1. Wireless Power Supply via Coupled Magnetic Resonance for on-line Monitoring Wireless Sensor of High-voltage Electrical Equipment

    DEFF Research Database (Denmark)

    Xingkui, Mao; Qisheng, Huang; Yudi, Xiao

    2016-01-01

    , in this paper, the wireless power supply via coupled magnetic resonance (MR-WPS) is proposed for powering the wireless sensor and the associated wireless sensor solution is also proposed. The key specifications of the MR-WPS working in switchgear cabinet with a harsh operation environment are analyzed...

  2. Trust framework for a secured routing in wireless sensor network

    Directory of Open Access Journals (Sweden)

    Ouassila Hoceini

    2015-11-01

    Full Text Available Traditional techniques to eliminate insider attacks developed for wired and wireless ad hoc networks are not well suited for wireless sensors networks due to their resource constraints nature. In order to protect WSNs against malicious and selfish behavior, some trust-based systems have recently been modeled. The resource efficiency and dependability of a trust system are the most fundamental requirements for any wireless sensor network (WSN. In this paper, we propose a Trust Framework for a Secured Routing in Wireless Sensor Network (TSR scheme, which works with clustered networks. This approach can effectively reduce the cost of trust evaluation and guarantee a better selection of safest paths that lead to the base station. Theoretical as well as simulation results show that our scheme requires less communication overheads and consumes less energy as compared to the current typical trust systems for WSNs. Moreover, it detects selfish and defective nodes and prevents us of insider attacks

  3. Security in Wireless Sensor Networks: Key Management Module in SOOAWSN

    Directory of Open Access Journals (Sweden)

    Mohammed A. Abuhelaleh

    2010-10-01

    Full Text Available Due to high restrictions in wireless sensor networks, where the resources are limited, clustering protocolsfor routing organization have been proposed in much research for increasing system throughput,decreasing system delay and saving energy. Even these algorithms have proposed some levels of security,but because of their dynamic nature of communication, most of their security solutions are not suitable. Inthis paper we focus on how to achieve the highest possible level of security by applying new keymanagement technique that can be used during wireless sensor networks communications. For ourproposal to be more effective and applicable to a large number of wireless sensor networks applications,we work on a special kind of architecture that have been proposed to cluster hierarchy of wireless sensornetworks and we pick one of the most interesting protocols that have been proposed for this kind ofarchitecture, which is LEACH. This proposal is a module of a complete solution that we are developing tocover all the aspects of wireless sensor networks communication which is labeled Secure Object OrientedArchitecture for Wireless Sensor Networks (SOOAWSN .

  4. Prototyping of Battery-less Wireless Sensor Node Using Electret-based Kinetic Energy Harvesting

    Science.gov (United States)

    Matsumoto, Koichi; Saruwatari, Kumio; Suzuki, Yuji

    A battery-less wireless sensor node using a vibration-driven MEMS electret energy harvester has been prototyped. With hybrid high-aspect ratio parylene springs and high-performance electret material based on perfluoro polymer CYTOP, more than 3μW output power can be obtained in a broad range vibration frequency of 26-40 Hz at 1.4 G. By integrating the energy harvester with a power management circuit, low-power-consumption CPU, and RF IC, intermittent wireless transmission with an interval of 80.6 s has been realized.

  5. Ultra-High Temperature Distributed Wireless Sensors

    Energy Technology Data Exchange (ETDEWEB)

    May, Russell; Rumpf, Raymond; Coggin, John; Davis, Williams; Yang, Taeyoung; O' Donnell, Alan; Bresnahan, Peter

    2013-03-31

    Research was conducted towards the development of a passive wireless sensor for measurement of temperature in coal gasifiers and coal-fired boiler plants. Approaches investigated included metamaterial sensors based on guided mode resonance filters, and temperature-sensitive antennas that modulate the frequency of incident radio waves as they are re-radiated by the antenna. In the guided mode resonant filter metamaterial approach, temperature is encoded as changes in the sharpness of the filter response, which changes with temperature because the dielectric loss of the guided mode resonance filter is temperature-dependent. In the mechanically modulated antenna approach, the resonant frequency of a vibrating cantilever beam attached to the antenna changes with temperature. The vibration of the beam perturbs the electrical impedance of the antenna, so that incident radio waves are phase modulated at a frequency equal to the resonant frequency of the vibrating beam. Since the beam resonant frequency depends on temperature, a Doppler radar can be used to remotely measure the temperature of the antenna. Laboratory testing of the guided mode resonance filter failed to produce the spectral response predicted by simulations. It was concluded that the spectral response was dominated by spectral reflections of radio waves incident on the filter. Laboratory testing of the mechanically modulated antenna demonstrated that the device frequency shifted incident radio waves, and that the frequency of the re-radiated waves varied linearly with temperature. Radio wave propagation tests in the convection pass of a small research boiler plant identified a spectral window between 10 and 13 GHz for low loss propagation of radio waves in the interior of the boiler.

  6. Geographic wormhole detection in wireless sensor networks.

    Directory of Open Access Journals (Sweden)

    Mehdi Sookhak

    Full Text Available Wireless sensor networks (WSNs are ubiquitous and pervasive, and therefore; highly susceptible to a number of security attacks. Denial of Service (DoS attack is considered the most dominant and a major threat to WSNs. Moreover, the wormhole attack represents one of the potential forms of the Denial of Service (DoS attack. Besides, crafting the wormhole attack is comparatively simple; though, its detection is nontrivial. On the contrary, the extant wormhole defense methods need both specialized hardware and strong assumptions to defend against static and dynamic wormhole attack. The ensuing paper introduces a novel scheme to detect wormhole attacks in a geographic routing protocol (DWGRP. The main contribution of this paper is to detect malicious nodes and select the best and the most reliable neighbors based on pairwise key pre-distribution technique and the beacon packet. Moreover, this novel technique is not subject to any specific assumption, requirement, or specialized hardware, such as a precise synchronized clock. The proposed detection method is validated by comparisons with several related techniques in the literature, such as Received Signal Strength (RSS, Authentication of Nodes Scheme (ANS, Wormhole Detection uses Hound Packet (WHOP, and Wormhole Detection with Neighborhood Information (WDI using the NS-2 simulator. The analysis of the simulations shows promising results with low False Detection Rate (FDR in the geographic routing protocols.

  7. Wirelessly powered sensor networks and computational RFID

    CERN Document Server

    2013-01-01

    The Wireless Identification and Sensing Platform (WISP) is the first of a new class of RF-powered sensing and computing systems.  Rather than being powered by batteries, these sensor systems are powered by radio waves that are either deliberately broadcast or ambient.  Enabled by ongoing exponential improvements in the energy efficiency of microelectronics, RF-powered sensing and computing is rapidly moving along a trajectory from impossible (in the recent past), to feasible (today), toward practical and commonplace (in the near future). This book is a collection of key papers on RF-powered sensing and computing systems including the WISP.  Several of the papers grew out of the WISP Challenge, a program in which Intel Corporation donated WISPs to academic applicants who proposed compelling WISP-based projects.  The book also includes papers presented at the first WISP Summit, a workshop held in Berkeley, CA in association with the ACM Sensys conference, as well as other relevant papers. The book provides ...

  8. Wireless Sensor Networks for Environmental Monitoring

    Science.gov (United States)

    Liang, X.; Liang, Y.; Navarro, M.; Zhong, X.; Villalba, G.; Li, Y.; Davis, T.; Erratt, N.

    2015-12-01

    Wireless sensor networks (WSNs) have gained an increasing interest in a broad range of new scientific research and applications. WSN technologies can provide high resolution for spatial and temporal data which has not been possible before, opening up new opportunities. On the other hand, WSNs, particularly outdoor WSNs in harsh environments, present great challenges for scientists and engineers in terms of the network design, deployment, operation, management, and maintenance. Since 2010, we have been working on the deployment of an outdoor multi-hop WSN testbed for hydrological/environmental monitoring in a forested hill-sloped region at the Audubon Society of Western Pennsylvania (ASWP), Pennsylvania, USA. The ASWP WSN testbed has continuously evolved and had more than 80 nodes by now. To our knowledge, the ASWP WSN testbed represents one of the first known long-term multi-hop WSN deployments in an outdoor environment. As simulation and laboratory methods are unable to capture the complexity of outdoor environments (e.g., forests, oceans, mountains, or glaciers), which significantly affect WSN operations and maintenance, experimental deployments are essential to investigate and understand WSN behaviors and performances as well as its maintenance characteristics under these harsh conditions. In this talk, based on our empirical studies with the ASWP WSN testbed, we will present our discoveries and investigations on several important aspects including WSN energy profile, node reprogramming, network management system, and testbed maintenance. We will then provide our insight into these critical aspects of outdoor WSN deployments and operations.

  9. Wireless sensor networks for structural health monitoring

    CERN Document Server

    Cao, Jiannong

    2016-01-01

    This brief covers the emerging area of wireless sensor network (WSN)-based structural health monitoring (SHM) systems, and introduces the authors’ WSN-based platform called SenetSHM. It helps the reader differentiate specific requirements of SHM applications from other traditional WSN applications, and demonstrates how these requirements are addressed by using a series of systematic approaches. The brief serves as a practical guide, explaining both the state-of-the-art technologies in domain-specific applications of WSNs, as well as the methodologies used to address the specific requirements for a WSN application. In particular, the brief offers instruction for problem formulation and problem solving based on the authors’ own experiences implementing SenetSHM. Seven concise chapters cover the development of hardware and software design of SenetSHM, as well as in-field experiments conducted while testing the platform. The brief’s exploration of the SenetSHM platform is a valuable feature for civil engine...

  10. Distance Based Fault detection in wireless sensor network

    Directory of Open Access Journals (Sweden)

    Ayasha Siddiqua

    2013-05-01

    Full Text Available Wireless Sensor Network (WSNs have become a new information collection and monitoring solution for a variety of application. In WSN, sensor nodes have strong hardware and software restrictionin terms of processing power, memory capability, power supply and communication throughput. Due to these restrictions, fault may occur in sensor. This paper presents a distance based fault detection (DBFDmethod for wireless sensor network using the average of confidence level and sensed data of sensor node. Simulation results show that sensor nodes with permanent faults and without fault which was judged as faulty are identified with high accuracy for a wide range of fault rate, and keep false alarm rate for different levels of sensor fault model and also correct nodes are identified by accuracy.

  11. A Novel Passive Wireless Sensor for Concrete Humidity Monitoring

    Science.gov (United States)

    Zhou, Shuangxi; Deng, Fangming; Yu, Lehua; Li, Bing; Wu, Xiang; Yin, Baiqiang

    2016-01-01

    This paper presents a passive wireless humidity sensor for concrete monitoring. After discussing the transmission of electromagnetic wave in concrete, a novel architecture of wireless humidity sensor, based on Ultra-High Frequency (UHF) Radio Frequency Identification (RFID) technology, is proposed for low-power application. The humidity sensor utilizes the top metal layer to form the interdigitated electrodes, which were then filled with polyimide as the humidity sensing layer. The sensor interface converts the humidity capacitance into a digital signal in the frequency domain. A two-stage rectifier adopts a dynamic bias-voltage generator to boost the effective gate-source voltage of the switches in differential-drive architecture. The clock generator employs a novel structure to reduce the internal voltage swing. The measurement results show that our proposed wireless humidity can achieve a high linearity with a normalized sensitivity of 0.55% %RH at 20 °C. Despite the high losses of concrete, the proposed wireless humidity sensor achieves reliable communication performances in passive mode. The maximum operating distance is 0.52 m when the proposed wireless sensor is embedded into the concrete at the depth of 8 cm. The measured results are highly consistent with the results measured by traditional methods. PMID:27657070

  12. A Novel Passive Wireless Sensor for Concrete Humidity Monitoring

    Directory of Open Access Journals (Sweden)

    Shuangxi Zhou

    2016-09-01

    Full Text Available This paper presents a passive wireless humidity sensor for concrete monitoring. After discussing the transmission of electromagnetic wave in concrete, a novel architecture of wireless humidity sensor, based on Ultra-High Frequency (UHF Radio Frequency Identification (RFID technology, is proposed for low-power application. The humidity sensor utilizes the top metal layer to form the interdigitated electrodes, which were then filled with polyimide as the humidity sensing layer. The sensor interface converts the humidity capacitance into a digital signal in the frequency domain. A two-stage rectifier adopts a dynamic bias-voltage generator to boost the effective gate-source voltage of the switches in differential-drive architecture. The clock generator employs a novel structure to reduce the internal voltage swing. The measurement results show that our proposed wireless humidity can achieve a high linearity with a normalized sensitivity of 0.55% %RH at 20 °C. Despite the high losses of concrete, the proposed wireless humidity sensor achieves reliable communication performances in passive mode. The maximum operating distance is 0.52 m when the proposed wireless sensor is embedded into the concrete at the depth of 8 cm. The measured results are highly consistent with the results measured by traditional methods.

  13. A Novel Passive Wireless Sensor for Concrete Humidity Monitoring.

    Science.gov (United States)

    Zhou, Shuangxi; Deng, Fangming; Yu, Lehua; Li, Bing; Wu, Xiang; Yin, Baiqiang

    2016-09-20

    This paper presents a passive wireless humidity sensor for concrete monitoring. After discussing the transmission of electromagnetic wave in concrete, a novel architecture of wireless humidity sensor, based on Ultra-High Frequency (UHF) Radio Frequency Identification (RFID) technology, is proposed for low-power application. The humidity sensor utilizes the top metal layer to form the interdigitated electrodes, which were then filled with polyimide as the humidity sensing layer. The sensor interface converts the humidity capacitance into a digital signal in the frequency domain. A two-stage rectifier adopts a dynamic bias-voltage generator to boost the effective gate-source voltage of the switches in differential-drive architecture. The clock generator employs a novel structure to reduce the internal voltage swing. The measurement results show that our proposed wireless humidity can achieve a high linearity with a normalized sensitivity of 0.55% %RH at 20 °C. Despite the high losses of concrete, the proposed wireless humidity sensor achieves reliable communication performances in passive mode. The maximum operating distance is 0.52 m when the proposed wireless sensor is embedded into the concrete at the depth of 8 cm. The measured results are highly consistent with the results measured by traditional methods.

  14. A Survey of Wireless Sensor Network Security and Routing Techniques

    Directory of Open Access Journals (Sweden)

    Raja Waseem Anwar

    2015-04-01

    Full Text Available The main purpose of the study is to review the evolution of wireless sensor network security and routing techniques. Recent years have seen tremendous growth in Wireless Sensor Networks (WSNs. As WSN’s become more and more crucial to everyday life, their security and trust become a primary concern. However because of the nature of WSNs, security design can be challenging. Trust-aware routing protocols play a vital role in security of Wireless Sensor Networks (WSNs. The review study provides an overview of Wireless Sensor Network (WSN and discusses security issues and the routing techniques for high quality of service and efficient performance in a WSN. In order to identify gaps and propose research directions in WSN security and routing techniques, the study surveys the existing body of literature in this area. The main focus is on trust concepts and trust based approaches for wireless sensor networks. The study also highlights the difference between trust and security in the context of WSNs. The trust and security are interchangeable with each other when we elaborate a secure system and not same. Various surveys conducted about trust and reputation systems in ad hoc and sensor networks are studied and compared. Finally we summarize the different trust aware routing schemes.

  15. The Use of Wireless Sensor Network for Increasing Airport Safety

    Directory of Open Access Journals (Sweden)

    Jakub Kraus

    2013-09-01

    Full Text Available This article deals with the use of wireless sensor networks for increasing safety at airports, respectively for replacing the current monitoring system to ensure safety. The article describes sensor networks and their applications to the identified processes and consideration of financial and safety benefits.

  16. Modeling Wireless Sensor Networks for Monitoring in Biological Processes

    DEFF Research Database (Denmark)

    Nadimi, Esmaeil

    parameters, as the use of wired sensors is impractical. In this thesis, a ZigBee based wireless sensor network was employed and only a part of the herd was monitored, as monitoring each individual animal in a large herd under practical conditions is inefficient. Investigations to show that the monitored...

  17. MAC Support for High Density Wireless Sensor Networks

    NARCIS (Netherlands)

    Taddia, C.; Meratnia, Nirvana; van Hoesel, L.F.W.; Mazzini, G.; Havinga, Paul J.M.

    Large scale and high density networks of tiny sensor nodes offer promising solutions for event detection and actuating applications. In this paper we address the effect of high density of wireless sensor network performance with a specific MAC protocol, the Lightweight Medium Access Control (LMAC).

  18. Adaptive Information Access on Multiple Applications Support Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Tobgay, Sonam; Olsen, Rasmus Løvenstein; Prasad, Ramjee

    2014-01-01

    information is challenged by dynamic nature of information elements. These challenges are more prominent in case of wireless sensor network (WSN) applications, as the information that the sensor node collects are mostly dynamic in nature (say, temperature). Therefore, it is likely that there can be a mismatch...

  19. Performance analysis of data retrieval in wireless sensor networks

    NARCIS (Netherlands)

    Mitici, M.A.

    2015-01-01

    Wireless sensor networks are currently revolutionizing the way we live, work, and interact with the surrounding environment. Due to their ease of deployment, cost effectiveness and versatile functionality, sensors are employed in a wide range of areas such as environmental monitoring, surveillance

  20. Multi-channel Support for Dense Wireless Sensor Networking

    NARCIS (Netherlands)

    Durmaz, O.; Dulman, S.O.; Jansen, P.G.; Havinga, Paul J.M.; Havinga, P.J.M.; Lijding, M.E.M.; Meratnia, N.; Meratnia, Nirvana; Wegdam, M.

    2006-01-01

    Currently, most wireless sensor network applications assume the presence of single-channel Medium Access Control (MAC) protocols. When sensor nodes are densely deployed, single-channel MAC protocols may be inadequate due to the higher demand for the limited bandwidth. To overcome this drawback, we

  1. Adaptive Information Access in Multiple Applications Support Wireless Sensor Network

    DEFF Research Database (Denmark)

    Tobgay, Sonam; Olsen, Rasmus Løvenstein; Prasad, Ramjee

    2012-01-01

    Nowadays, due to wide applicability of Wireless Sensor Network (WSN) added by the low cost sensor devices, its popularity among the researchers and industrialists are very much visible. A substantial amount of works can be seen in the literature on WSN which are mainly focused on application...

  2. Combine harvester monitor system based on wireless sensor network

    Science.gov (United States)

    A measurement method based on Wireless Sensor Network (WSN) was developed to monitor the working condition of combine harvester for remote application. Three JN5139 modules were chosen for sensor data acquisition and another two as a router and a coordinator, which could create a tree topology netwo...

  3. Low-power Radar for Wireless Sensor Networks

    NARCIS (Netherlands)

    Ditzel, M.; Elferink, F.H.

    2006-01-01

    Abstract—This paper presents the results of a short study on the feasibility of radars as the primary means of sensing in ad-hoc wireless sensor networks. Radar offers distinct advantages over others means of sensing, normally found in this kind of networks. The sensor networks being considered cons

  4. Energy Aware Clustering Algorithms for Wireless Sensor Networks

    Science.gov (United States)

    Rakhshan, Noushin; Rafsanjani, Marjan Kuchaki; Liu, Chenglian

    2011-09-01

    The sensor nodes deployed in wireless sensor networks (WSNs) are extremely power constrained, so maximizing the lifetime of the entire networks is mainly considered in the design. In wireless sensor networks, hierarchical network structures have the advantage of providing scalable and energy efficient solutions. In this paper, we investigate different clustering algorithms for WSNs and also compare these clustering algorithms based on metrics such as clustering distribution, cluster's load balancing, Cluster Head's (CH) selection strategy, CH's role rotation, node mobility, clusters overlapping, intra-cluster communications, reliability, security and location awareness.

  5. The Effect of Information Access Strategy on Power Consumption and Reliability in Wireless Sensor Network

    DEFF Research Database (Denmark)

    Tobgay, Sonam; Olsen, Rasmus Løvenstein; Prasad, Ramjee

    2013-01-01

    This paper examines the effect of different information access strategies on power consumption and information reliability, considering the wireless sensor network as the source of information. Basically, the paper explores three different access strategies, namely; reactive, periodic and hybrid...... and computes power consumption and mismatch probability [1] in each of these access strategies. Based on our study, we make some recommendations when and where, which access strategy is suitable depending upon the application's requirements and network behavior. It also provides the model implementation...

  6. On localization with robust power control for safety critical wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    A hybrid methodology is proposed for use in low power, safety critical wireless sensor network applications, where quality-of-service orientated transceiver output power control is required to operate in parallel with radio frequency-based localization. The practical implementation is framed in an experimental procedure designed to track a moving agent in a realistic indoor environment. An adaptive time synchronized approach is employed to ensure the positioning technique can operate effectively in the pres...

  7. A Wireless Sensor Network Air Pollution Monitoring System

    CERN Document Server

    Khedo, Kavi K; Mungur, Avinash; Mauritius, University of; Mauritius,; 10.5121/ijwmn.2010.2203

    2010-01-01

    Sensor networks are currently an active research area mainly due to the potential of their applications. In this paper we investigate the use of Wireless Sensor Networks (WSN) for air pollution monitoring in Mauritius. With the fast growing industrial activities on the island, the problem of air pollution is becoming a major concern for the health of the population. We proposed an innovative system named Wireless Sensor Network Air Pollution Monitoring System (WAPMS) to monitor air pollution in Mauritius through the use of wireless sensors deployed in huge numbers around the island. The proposed system makes use of an Air Quality Index (AQI) which is presently not available in Mauritius. In order to improve the efficiency of WAPMS, we have designed and implemented a new data aggregation algorithm named Recursive Converging Quartiles (RCQ). The algorithm is used to merge data to eliminate duplicates, filter out invalid readings and summarise them into a simpler form which significantly reduce the amount of dat...

  8. Analysis on Ad Hoc Routing Protocols in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    P.N.Renjith

    2012-12-01

    Full Text Available Outlook of wireless communication system marked an extreme transform with the invention of Wireless Sensor Networks (WSN. WSN is a promising technolog y for enabling a variety of applications like environmental monitoring, security and applications that save our lives and assets. In WSN, large numbers of sensor nodes are deployed to sensing and gathering information and forward them to the base station with the help of routing protocol. Routing protocols plays a major role by identifying and maintaining the routes in the network. Competence o f sensor networks relay on the strong and effective routing protocol used. In this paper, we present a simulation based performance evaluation of differen t Ad hoc routing protocols like AODV, DYMO, FSR, LANM AR, RIP and ZRP in Wireless Sensor Networks. Based on the study, the future research areas and k ey challenges for routing protocol in WSN are to optimize network performance for QoS support and en ergy conservation

  9. Small Worlds in the Tree Topologies of Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Qiao, Li; Lingguo, Cui; Baihai, Zhang

    2010-01-01

    In this study, the characteristics of small worlds are investigated in the context of the tree topologies of wireless sensor networks. Tree topologies, which construct spatial graphs with larger characteristic path lengths than random graphs and small clustering coefficients, are ubiquitous...... in wireless sensor networks. Suffering from the link rewiring or the link addition, the characteristic path length of the tree topology reduces rapidly and the clustering coefficient increases greatly. The variety of characteristic path length influences the time synchronization characteristics of wireless...... sensor networks greatly. With the increase of the link rewiring or the link addition probability, the time synchronization error decreases drastically. Two novel protocols named LEACH-SW and TREEPSI-SW are proposed to improve the performances of the sensor networks, in which the small world...

  10. Power source for wireless sensors in pipes

    Science.gov (United States)

    Keddis, Sherif; Schwesinger, Norbert

    2016-04-01

    In this paper, we present investigations on wireless sensors for fluid control inside a pipe. Autarkic sensors are in the technical trend. They are typically connected with a transceiver unit for data transmission. Sensors usually need a lower amount of energy than data transceivers. Therefore, they are commonly supplied via wires or batteries with electricity. With common technologies, this request leads to high requirements on tightness in liquids since poor sealing could easily lead to failures. Replacement of batteries inside pipes is complicated and almost accompanied by a flow interruption. The application of energy harvesters as power supply is therefore a good alternative. In our studies we used flexible piezoelectric energy harvesters of PVDF (Poly-Vinylidene-Di-Fluoride). All harvesting units consist of piezoelectric PVDF-foils as active layers and Aluminum-foils as electrodes. The layers were stacked alternating on each other and wound to a spool. A LDPE-film wraps the spool and prevents the inflow of liquids. The device has following parameters: No. of windings: 4 in air, 4, 5, 7 in water Dimensions: 15 mm Ø 22mm Materials: PDVF: 25μm Aluminimum: 6μm, LDPE: 25μm A ring shaped bluff body was placed inside the pipe to induce turbulence in the fluid stream. As the harvesters have been arranged downstream of the bluff body, they were forced to oscillate independent of the media. In each case, deformation of the active layers led to a polarization and a separation of electrical charges. Experiments were carried out in a wind channel as well as in a water pipe. In air, the spool oscillates with a frequency of about 30Hz, at a wind speed of about 7m/s. A -Voltage of about 4V (peak-peak) was measured. This delivers in case of power adjustment, power values of about 0.54μW. In water, the velocity of the fluid was limited to nearly one tenth. Oscillation starts only at a water speed above 0.6m/s. The average oscillation frequency is about 18Hz. At a velocity

  11. 7th China Conference on Wireless Sensor Networks

    CERN Document Server

    Cui, Li; Guo, Zhongwen

    2014-01-01

    Advanced Technologies in Ad Hoc and Sensor Networks collects selected papers from the 7th China Conference on Wireless Sensor Networks (CWSN2013) held in Qingdao, October 17-19, 2013. The book features state-of-the-art studies on Sensor Networks in China with the theme of “Advances in wireless sensor networks of China”. The selected works can help promote development of sensor network technology towards interconnectivity, resource sharing, flexibility and high efficiency. Researchers and engineers in the field of sensor networks can benefit from the book. Xue Wang is a professor at Tsinghua University; Li Cui is a professor at Institute of Computing Technology, Chinese Academy of Sciences; Zhongwen Guo is a professor at Ocean University of China.

  12. Miniaturized, low power FGMOSFET radiation sensor and wireless dosimeter system

    KAUST Repository

    Arsalan, Muhammad

    2013-08-27

    A miniaturized floating gate (FG) MOSFET radiation sensor system is disclosed, The sensor preferably comprises a matched pair of sensor and reference FGMOSFETs wherein the sensor FGMOSFET has a larger area floating gate with an extension over a field oxide layer, for accumulation of charge and increased sensitivity. Elimination of a conventional control gate and injector gate reduces capacitance, and increases sensitivity, and allows for fabrication using standard low cost CMOS technology. A sensor system may be provided with integrated signal processing electronics, for monitoring a change in differential channel current I.sub.D, indicative of radiation dose, and an integrated negative bias generator for automatic pre-charging from a low voltage power source. Optionally, the system may be coupled to a wireless transmitter. A compact wireless sensor System on Package solution is presented, suitable for dosimetry for radiotherapy or other biomedical applications.

  13. Time Synchronized Wireless Sensor Network for Vibration Measurement

    Science.gov (United States)

    Uchimura, Yutaka; Nasu, Tadashi; Takahashi, Motoichi

    Network based wireless sensing has become an important area of research and various new applications for remote sensing are expected to emerge. One of the promising applications is structural health monitoring of building or civil engineering structure and it often requires vibration measurement. For the vibration measurement via wireless network, time synchronization is indispensable. In this paper, we introduce a newly developed time synchronized wireless sensor network system. The system employs IEEE 802.11 standard based TSF counter and sends the measured data with the counter value. TSF based synchronization enables consistency on common clock among different wireless nodes. We consider the scale effect on the synchronization accuracy and the effect is evaluated by stochastic analysis and simulation studies. A new wireless sensing system is developed and the hardware and software specifications are shown. The experiments are conducted in a reinforced concrete building and results show good performance enough for vibration measurement purpose.

  14. Wireless Sensor Networks for Resources Tracking at Building Construction Sites

    Institute of Scientific and Technical Information of China (English)

    SHEN Xuesong; CHEN Wu; LU Ming

    2008-01-01

    We evaluate the technical feasibility of applying emerging wireless network technologies for re-sources tracking at building construction sites.We first identify practical constraints in solving resource-tracking problems in an enclosed or partially covered environment.We then compare pros and cons of available localization principles and examine the latest wireless communication technologies,including Wi-Fi,Bluetooth,Ultra-Wideband(UWB)and ZigBee.We find that the ZigBee-based wireless sensor network and the received signal strength indicator(RSSI)localization method are most promising to tackle on-site tracking of construction resources.Finally,we anticipate some application challenges associated with deploying wireless sensor networks for resources tracking in the practical context.

  15. Research Trends in Wireless Visual Sensor Networks When Exploiting Prioritization

    Directory of Open Access Journals (Sweden)

    Daniel G. Costa

    2015-01-01

    Full Text Available The development of wireless sensor networks for control and monitoring functions has created a vibrant investigation scenario, where many critical topics, such as communication efficiency and energy consumption, have been investigated in the past few years. However, when sensors are endowed with low-power cameras for visual monitoring, a new scope of challenges is raised, demanding new research efforts. In this context, the resource-constrained nature of sensor nodes has demanded the use of prioritization approaches as a practical mechanism to lower the transmission burden of visual data over wireless sensor networks. Many works in recent years have considered local-level prioritization parameters to enhance the overall performance of those networks, but global-level policies can potentially achieve better results in terms of visual monitoring efficiency. In this paper, we make a broad review of some recent works on priority-based optimizations in wireless visual sensor networks. Moreover, we envisage some research trends when exploiting prioritization, potentially fostering the development of promising optimizations for wireless sensor networks composed of visual sensors.

  16. Research trends in wireless visual sensor networks when exploiting prioritization.

    Science.gov (United States)

    Costa, Daniel G; Guedes, Luiz Affonso; Vasques, Francisco; Portugal, Paulo

    2015-01-15

    The development of wireless sensor networks for control and monitoring functions has created a vibrant investigation scenario, where many critical topics, such as communication efficiency and energy consumption, have been investigated in the past few years. However, when sensors are endowed with low-power cameras for visual monitoring, a new scope of challenges is raised, demanding new research efforts. In this context, the resource-constrained nature of sensor nodes has demanded the use of prioritization approaches as a practical mechanism to lower the transmission burden of visual data over wireless sensor networks. Many works in recent years have considered local-level prioritization parameters to enhance the overall performance of those networks, but global-level policies can potentially achieve better results in terms of visual monitoring efficiency. In this paper, we make a broad review of some recent works on priority-based optimizations in wireless visual sensor networks. Moreover, we envisage some research trends when exploiting prioritization, potentially fostering the development of promising optimizations for wireless sensor networks composed of visual sensors.

  17. Open-WiSe: a solar powered wireless sensor network platform.

    Science.gov (United States)

    González, Apolinar; Aquino, Raúl; Mata, Walter; Ochoa, Alberto; Saldaña, Pedro; Edwards, Arthur

    2012-01-01

    Because battery-powered nodes are required in wireless sensor networks and energy consumption represents an important design consideration, alternate energy sources are needed to provide more effective and optimal function. The main goal of this work is to present an energy harvesting wireless sensor network platform, the Open Wireless Sensor node (WiSe). The design and implementation of the solar powered wireless platform is described including the hardware architecture, firmware, and a POSIX Real-Time Kernel. A sleep and wake up strategy was implemented to prolong the lifetime of the wireless sensor network. This platform was developed as a tool for researchers investigating Wireless sensor network or system integrators.

  18. Hybrid positioning with lighting LEDs and Zigbee multihop wireless network

    Science.gov (United States)

    Lee, Y. U.; Baang, S.; Park, J.; Zhou, Z.; Kavehrad, M.

    2012-01-01

    A simple, accurate, secure, long-lasting, and portable hybrid positioning system is proposed and designed in this paper. It consists of a lighting LED that generates visible light data corresponding to position information of a target and a Zigbee wireless network communication module with low power, security, and service area expansion characteristics. Under an indoor environment where there is 23.62m distance between an observer and the target, the presented hybrid positioning system is tested and is verified with the functions of Zigbee three hop wireless networking and visible light communication (VLC) scheme. The test results are analyzed and discussed.

  19. Interoperability in wireless sensor networks based on IEEE 1451 standard

    OpenAIRE

    Higuera Portilla, Jorge Eduardo; Polo Cantero, José

    2012-01-01

    The syntactic and semantic interoperability is a challenge of the Wireless Sensor Networks (WSN) with smart sensors in pervasive computing environments to increase their harmonization in a wide variety of applications. This chapter contains a detailed description of interoperability in heterogeneous WSN using the IEEE 1451 standard. This work focuses on personal area networks (PAN) with smart sensors and actuators. Also, a technical, syntactic and semantic levels of interoperability based on ...

  20. Data Driven Performance Evaluation of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Antonio A. F. Loureiro

    2010-03-01

    Full Text Available Wireless Sensor Networks are presented as devices for signal sampling and reconstruction. Within this framework, the qualitative and quantitative influence of (i signal granularity, (ii spatial distribution of sensors, (iii sensors clustering, and (iv signal reconstruction procedure are assessed. This is done by defining an error metric and performing a Monte Carlo experiment. It is shown that all these factors have significant impact on the quality of the reconstructed signal. The extent of such impact is quantitatively assessed.

  1. A newself-localization method for wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Many applications of wireless sensor networks can benefit from fine-grained localization. In this paper, we proposed an accurate, distributed localization method based on the time difference between radio signal and sound wave. In a trilateration, each node adaptively chooses a neighborhood of sensors and updates its position estimate with trilateration, and then passes this update to neighboring sensors. Application examples demonstrate that the proposed method is more robust and accurate in localizing nod...

  2. Interoperability in wireless sensor networks based on IEEE 1451 standard

    OpenAIRE

    Higuera Portilla, Jorge Eduardo; Polo Cantero, José

    2012-01-01

    The syntactic and semantic interoperability is a challenge of the Wireless Sensor Networks (WSN) with smart sensors in pervasive computing environments to increase their harmonization in a wide variety of applications. This chapter contains a detailed description of interoperability in heterogeneous WSN using the IEEE 1451 standard. This work focuses on personal area networks (PAN) with smart sensors and actuators. Also, a technical, syntactic and semantic levels of interoperability based on ...

  3. Energy storage management system with distributed wireless sensors

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, Joseph C.; Bandhauer, Todd M.

    2015-12-08

    An energy storage system having a multiple different types of energy storage and conversion devices. Each device is equipped with one or more sensors and RFID tags to communicate sensor information wirelessly to a central electronic management system, which is used to control the operation of each device. Each device can have multiple RFID tags and sensor types. Several energy storage and conversion devices can be combined.

  4. Implementation of Low Power Multi-hop Wireless Sensor Network

    OpenAIRE

    Zhou Jianhong; Ma Maode; Fengyong

    2016-01-01

    In this paper, the multi-hop wireless sensor network is created, which is realized by Micaz and Mib520 Board using TinyOS and Cygwin. The mote transmission mode is engaged and off-the-shelf protocols and algorithm, RSSI and PDR, are applied in this wireless network and the performance is improved. Several experiments are proposed to set standard RSSI threshold value to allow the user to send packet with efficient power level.

  5. Communication patterns in mean field models for wireless sensor networks

    OpenAIRE

    2015-01-01

    Wireless sensor networks are usually composed of a large number of nodes, and with the increasing processing power and power consumption efficiency they are expected to run more complex protocols in the future. These pose problems in the field of verification and performance evaluation of wireless networks. In this paper, we tailor the mean-field theory as a modeling technique to analyze their behavior. We apply this method to the slotted ALOHA protocol, and establish results on the long term...

  6. Cooperative Jamming for Physical Layer Security in Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Rohokale, Vandana M.; Prasad, Neeli R.; Prasad, Ramjee

    2012-01-01

    Interference is generally considered as the redundant and unwanted occurrence in wireless communication. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper...... work as cooperative jamming sources to increase the equivocation of the eavesdropper. In this work, eavesdropper’s equivocation is compared with the main channel in terms of mutual information and secrecy capacity....

  7. Wireless, magnetic-based sensors for biomedical applications.

    Science.gov (United States)

    Ong, Keat Ghee; Tan, Ee Lim; Pereles, Brandon; Horton, Brock

    2009-01-01

    Wireless magnetic sensor technologies are gaining popularity in biomedical community due to their remote query nature, which allows them to be used as long-term implantable sensors. Some of these sensors are also low cost so they are suitable for use on a disposable basis. In this paper, two wireless magnetic sensors are described: the magnetoelastic sensor and the magneto-harmonic sensor. Magnetoelastic sensors are made of magnetoelastic materials that when under an AC magnetic field excitation, vibrate and resonate at their resonant frequencies. Since the resonant frequency of a magnetoelastic sensor is proportional to the mass or viscosity of the surrounding material, it has been used to detect chemical and biological targets by incorporating coatings that change mass/elasticity in response to the parameters of interest. Conversely, magneto-harmonic sensors detect parameters of interest by monitoring the change in the pattern or amplitude of the magnetic higher-order harmonic fields. Typically, a magneto-harmonic sensor consists of a magnetically soft material (sensing element) and a permanent magnet (biasing element). When energized by an AC magnetic field, the sensing element generates higher-order magnetic fields that change with the biasing field from the biasing element. By designing the sensor so the separation distance between these two elements varies with the parameters of interest, the magneto-harmonic sensor has been used for remote measurement of pressure and stress. This paper presents the operating principles and biomedical applications of these sensors.

  8. Implantable radio frequency identification sensors: wireless power and communication.

    Science.gov (United States)

    Hutchens, Chriswell; Rennaker, Robert L; Venkataraman, Srinivasan; Ahmed, Rehan; Liao, Ran; Ibrahim, Tamer

    2011-01-01

    There are significant technical challenges in the development of a fully implantable wirelessly powered neural interface. Challenges include wireless transmission of sufficient power to the implanted device to ensure reliable operation for decades without replacement, minimizing tissue heating, and adequate reliable communications bandwidth. Overcoming these challenges is essential for the development of implantable closed loop system for the treatment of disorders ranging from epilepsy, incontinence, stroke and spinal cord injury. We discuss the development of the wireless power, communication and control for a Radio-Frequency Identification Sensor (RFIDS) system with targeted power range for a 700 mV, 30 to 40 uA load attained at -2 dBm.

  9. Robust Forecasting for Energy Efficiency of Wireless Multimedia Sensor Networks

    Directory of Open Access Journals (Sweden)

    Dao-Wei Bi

    2007-11-01

    Full Text Available An important criterion of wireless sensor network is the energy efficiency inspecified applications. In this wireless multimedia sensor network, the observations arederived from acoustic sensors. Focused on the energy problem of target tracking, this paperproposes a robust forecasting method to enhance the energy efficiency of wirelessmultimedia sensor networks. Target motion information is acquired by acoustic sensornodes while a distributed network with honeycomb configuration is constructed. Thereby,target localization is performed by multiple sensor nodes collaboratively through acousticsignal processing. A novel method, combining autoregressive moving average (ARMAmodel and radial basis function networks (RBFNs, is exploited to perform robust targetposition forecasting during target tracking. Then sensor nodes around the target areawakened according to the forecasted target position. With committee decision of sensornodes, target localization is performed in a distributed manner and the uncertainty ofdetection is reduced. Moreover, a sensor-to-observer routing approach of the honeycombmesh network is investigated to solve the data reporting considering the residual energy ofsensor nodes. Target localization and forecasting are implemented in experiments.Meanwhile, sensor node awakening and dynamic routing are evaluated. Experimentalresults verify that energy efficiency of wireless multimedia sensor network is enhanced bythe proposed target tracking method.

  10. Joint routing, scheduling, and power control for multichannel wireless sensor networks with physical interference

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Reliability and real-time requirements bring new challenges to the energy-constrained wireless sensor networks, especially to the industrial wireless sensor networks. Meanwhile, the capacity of wireless sensor networks can be substantially increased by operating on multiple nonoverlapping channels. In this context, new routing, scheduling, and power control algorithms are required to achieve reliable and real-time communications and to fully utilize the increased bandwidth in multichannel wireless sensor ne...

  11. A survey on routing in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    XIAO Renyi; WU Guozheng

    2007-01-01

    One of the most important issues in wireless sensor networks is data delivery service between sensors and the data collection unit (called sink ). Although sensor networks and mobile ad hoc networks are similar to some extent, they are radically distinct in many aspects. Sensor networks have many unique features, making them more challenging and need further research efforts. The existing routing protocols for sensor networks can be classified as indicator-based and indicator-free. In this survey, we make a comparative study of these protocols. Open issues and research directions are pointed out as guidelines for our future work.

  12. HARDWARE IMPLEMENTATION OF SECURE AODV FOR WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    S. Sharmila

    2010-12-01

    Full Text Available Wireless Sensor Networks are extremely vulnerable to any kind of routing attacks due to several factors such as wireless transmission and resource-constrained nodes. In this respect, securing the packets is of great importance when designing the infrastructure and protocols of sensor networks. This paper describes the hardware architecture of secure routing for wireless sensor networks. The routing path is selected using Ad-hoc on demand distance vector routing protocol (AODV. The data packets are converted into digest using hash functions. The functionality of the proposed method is modeled using Verilog HDL in MODELSIM simulator and the performance is compared with various target devices. The results show that the data packets are secured and defend against the routing attacks with minimum energy consumption.

  13. Prediction-based Dynamic Energy Management in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Dao-Wei Bi

    2007-03-01

    Full Text Available Energy consumption is a critical constraint in wireless sensor networks. Focusing on the energy efficiency problem of wireless sensor networks, this paper proposes a method of prediction-based dynamic energy management. A particle filter was introduced to predict a target state, which was adopted to awaken wireless sensor nodes so that their sleep time was prolonged. With the distributed computing capability of nodes, an optimization approach of distributed genetic algorithm and simulated annealing was proposed to minimize the energy consumption of measurement. Considering the application of target tracking, we implemented target position prediction, node sleep scheduling and optimal sensing node selection. Moreover, a routing scheme of forwarding nodes was presented to achieve extra energy conservation. Experimental results of target tracking verified that energy-efficiency is enhanced by prediction-based dynamic energy management.

  14. Distributed Source Localization in Wireless Underground Sensor Networks

    CERN Document Server

    Chen, Hongyang; Wang, Chen

    2011-01-01

    Node localization plays an important role in many practical applications of wireless underground sensor networks (WUSNs), such as finding the locations of earthquake epicenters, underground explosions, and microseismic events in mines. It is more difficult to obtain the time-difference-of-arrival (TDOA) measurements in WUSNs than in terrestrial wireless sensor networks because of the unfavorable channel characteristics in the underground environment. The robust Chinese remainder theorem (RCRT) has been shown to be an effective tool for solving the phase ambiguity problem and frequency estimation problem in wireless sensor networks. In this paper, the RCRT is used to robustly estimate TDOA or range difference in WUSNs and therefore improves the ranging accuracy in such networks. After obtaining the range difference, distributed source localization algorithms based on a diffusion strategy are proposed to decrease the communication cost while satisfying the localization accuracy requirement. Simulation results c...

  15. Tracking Mobile Robot in Indoor Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Liping Zhang

    2014-01-01

    Full Text Available This work addresses the problem of tracking mobile robots in indoor wireless sensor networks (WSNs. Our approach is based on a localization scheme with RSSI (received signal strength indication which is used widely in WSN. The developed tracking system is designed for continuous estimation of the robot’s trajectory. A WSN, which is composed of many very simple and cheap wireless sensor nodes, is deployed at a specific region of interest. The wireless sensor nodes collect RSSI information sent by mobile robots. A range-based data fusion scheme is used to estimate the robot’s trajectory. Moreover, a Kalman filter is designed to improve tracking accuracy. Experiments are provided to assess the performance of the proposed scheme.

  16. Personal Navigation Algorithms Based on Wireless Networks and Inertial Sensors

    Science.gov (United States)

    Kaňa, Zdenek; Bradáč, Zdenek; Fiedler, Petr

    2014-08-01

    The work aims at a development of positioning algorithm suitable for low-cost indoor or urban pedestrian navigation application. The sensor fusion was applied to increase the localization accuracy. Due to required low application cost only low grade inertial sensors and wireless network based ranging were taken into account. The wireless network was assumed to be preinstalled due to other required functionality (for example: building control) therefore only received signal strength (RSS) range measurement technique was considered. Wireless channel loss mapping method was proposed to overcome the natural uncertainties and restrictions in the RSS range measurements The available sensor and environment models are summarized first and the most appropriate ones are selected secondly. Their effective and novel application in the navigation task, and favorable fusion (Particle filtering) of all available information are the main objectives of this thesis.

  17. Analysis of distribution uniformity of nodes in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhenjiang

    2007-01-01

    Wireless sensor networks have several special characteristics which make against the network coverage, such as shortage of energy, difficulty with energy supply and so on. In order to prolong the lifetime of wireless sensor networks, it is necessary to balance the whole network load. As the energy consumption is related to the situation of nodes, the distribution uniformity must be considered. In this paper, a new model is proposed to evaluate the nodes distribution uniformity by considering some parameters which include compression discrepancy, sparseness discrepancy, self discrepancy, maximum cavity radius and minimum cavity radius. The simulation results show that the presented model could be helpful for measuring the distribution uniformity of nodes scattered randomly in wireless sensor networks.

  18. Energy parameter estimation in solar powered wireless sensor networks

    KAUST Repository

    Mousa, Mustafa

    2014-02-24

    The operation of solar powered wireless sensor networks is associated with numerous challenges. One of the main challenges is the high variability of solar power input and battery capacity, due to factors such as weather, humidity, dust and temperature. In this article, we propose a set of tools that can be implemented onboard high power wireless sensor networks to estimate the battery condition and capacity as well as solar power availability. These parameters are very important to optimize sensing and communications operations and maximize the reliability of the complete system. Experimental results show that the performance of typical Lithium Ion batteries severely degrades outdoors in a matter of weeks or months, and that the availability of solar energy in an urban solar powered wireless sensor network is highly variable, which underlines the need for such power and energy estimation algorithms.

  19. A wind energy powered wireless temperature sensor node.

    Science.gov (United States)

    Zhang, Chuang; He, Xue-Feng; Li, Si-Yu; Cheng, Yao-Qing; Rao, Yang

    2015-02-27

    A wireless temperature sensor node composed of a piezoelectric wind energy harvester, a temperature sensor, a microcontroller, a power management circuit and a wireless transmitting module was developed. The wind-induced vibration energy harvester with a cuboid chamber of 62 mm × 19.6 mm × 10 mm converts ambient wind energy into electrical energy to power the sensor node. A TMP102 temperature sensor and the MSP430 microcontroller are used to measure the temperature. The power management module consists of LTC3588-1 and LT3009 units. The measured temperature is transmitted by the nRF24l01 transceiver. Experimental results show that the critical wind speed of the harvester was about 5.4 m/s and the output power of the harvester was about 1.59 mW for the electrical load of 20 kΩ at wind speed of 11.2 m/s, which was sufficient to power the wireless sensor node to measure and transmit the temperature every 13 s. When the wind speed increased from 6 m/s to 11.5 m/s, the self-powered wireless sensor node worked normally.

  20. A Wind Energy Powered Wireless Temperature Sensor Node

    Directory of Open Access Journals (Sweden)

    Chuang Zhang

    2015-02-01

    Full Text Available A wireless temperature sensor node composed of a piezoelectric wind energy harvester, a temperature sensor, a microcontroller, a power management circuit and a wireless transmitting module was developed. The wind-induced vibration energy harvester with a cuboid chamber of 62 mm × 19.6 mm × 10 mm converts ambient wind energy into electrical energy to power the sensor node. A TMP102 temperature sensor and the MSP430 microcontroller are used to measure the temperature. The power management module consists of LTC3588-1 and LT3009 units. The measured temperature is transmitted by the nRF24l01 transceiver. Experimental results show that the critical wind speed of the harvester was about 5.4 m/s and the output power of the harvester was about 1.59 mW for the electrical load of 20 kΩ at wind speed of 11.2 m/s, which was sufficient to power the wireless sensor node to measure and transmit the temperature every 13 s. When the wind speed increased from 6 m/s to 11.5 m/s, the self-powered wireless sensor node worked normally.

  1. A Generalized Framework for Energy Conservation in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    V. S. Anita Sofia

    2011-01-01

    Full Text Available A Wireless Sensor Networks (WSN consists of spatially distributed autonomous sensors to cooperatively monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants. WSN contains a large number of nodes with a limited energy supply. A wireless sensor network consists of nodes that can communicate with each other via wireless links. Sensors are be remotely deployed in large numbers and operates autonomously in unattended environments. One way to support efficient communication between sensors is to organize the network into several groups, called clusters, with each cluster electing one node as the head of cluster To support scalability, nodes are often grouped into disjoint and mostly non-overlapping clusters. This paper deals about the frame work for energy conservation of a Wireless sensor network. The frame work is developed such a way that the nodes are to be clustered, electing the cluster head, performing intra cluster transmission and from the cluster head the information is transmitted to the base station.

  2. Wearable, wireless gas sensors using highly stretchable and transparent structures of nanowires and graphene

    Science.gov (United States)

    Park, Jihun; Kim, Joohee; Kim, Kukjoo; Kim, So-Yun; Cheong, Woon Hyung; Park, Kyeongmin; Song, Joo Hyeb; Namgoong, Gyeongho; Kim, Jae Joon; Heo, Jaeyeong; Bien, Franklin; Park, Jang-Ung

    2016-05-01

    Herein, we report the fabrication of a highly stretchable, transparent gas sensor based on silver nanowire-graphene hybrid nanostructures. Due to its superb mechanical and optical characteristics, the fabricated sensor demonstrates outstanding and stable performances even under extreme mechanical deformation (stable until 20% of strain). The integration of a Bluetooth system or an inductive antenna enables the wireless operation of the sensor. In addition, the mechanical robustness of the materials allows the device to be transferred onto various nonplanar substrates, including a watch, a bicycle light, and the leaves of live plants, thereby achieving next-generation sensing electronics for the `Internet of Things' area.Herein, we report the fabrication of a highly stretchable, transparent gas sensor based on silver nanowire-graphene hybrid nanostructures. Due to its superb mechanical and optical characteristics, the fabricated sensor demonstrates outstanding and stable performances even under extreme mechanical deformation (stable until 20% of strain). The integration of a Bluetooth system or an inductive antenna enables the wireless operation of the sensor. In addition, the mechanical robustness of the materials allows the device to be transferred onto various nonplanar substrates, including a watch, a bicycle light, and the leaves of live plants, thereby achieving next-generation sensing electronics for the `Internet of Things' area. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr01468b

  3. Improving energy efficiency in wireless sensor networks through scheduling and routing

    CERN Document Server

    R, Rathna; 10.5121/ijassn.2012.2103

    2012-01-01

    This paper is about the wireless sensor network in environmental monitoring applications. A Wireless Sensor Network consists of many sensor nodes and a base station. The number and type of sensor nodes and the design protocols for any wireless sensor network is application specific. The sensor data in this application may be light intensity, temperature, pressure, humidity and their variations .Clustering and routing are the two areas which are given more attention in this paper.

  4. Mobile Assisted Security in Wireless Sensor Networks

    Science.gov (United States)

    2015-08-03

    connected to a D-Link DIR-615 v.E3 Wireless Router as shown in Figure 1. The router used in the experiments was a D-Link DIR- 615rev.E3 which is fairly...connected through wireless to the D-Link Wi-Fi Router . The network traffic monitoring device is connected to the router via an ethernet cable to...enhance the packet forwarding performance of router and not to effect the wireless spectrum capacity that is used for streaming with Chromecast and Tablet

  5. Wireless Zigbee strain gage sensor system for structural health monitoring

    Science.gov (United States)

    Ide, Hiroshi; Abdi, Frank; Miraj, Rashid; Dang, Chau; Takahashi, Tatsuya; Sauer, Bruce

    2009-05-01

    A compact cell phone size radio frequency (ZigBee) wireless strain measurement sensor system to measure the structural strain deformation was developed. The developed system provides an accurate strain measurement data stream to the Internet for further Diagnostic and Prognostic (DPS) correlation. Existing methods of structural measurement by strain sensors (gauges) do not completely satisfy problems posed by continuous structural health monitoring. The need for efficient health monitoring methods with real-time requirements to bidirectional data flow from sensors and to a commanding device is becoming critical for keeping our daily life safety. The use of full-field strain measurement techniques could reduce costly experimental programs through better understanding of material behavior. Wireless sensor-network technology is a monitoring method that is estimated to grow rapidly providing potential for cost savings over traditional wired sensors. The many of currently available wireless monitoring methods have: the proactive and constant data rate character of the data streams rather than traditional reactive, event-driven data delivery; mostly static node placement on structures with limited number of nodes. Alpha STAR Electronics' wireless sensor network system, ASWN, addresses some of these deficiencies, making the system easier to operate. The ASWN strain measurement system utilizes off-the-shelf sensors, namely strain gauges, with an analog-to-digital converter/amplifier and ZigBee radio chips to keep cost lower. Strain data is captured by the sensor, converted to digital form and delivered to the ZigBee radio chip, which in turn broadcasts the information using wireless protocols to a Personal Data Assistant (PDA) or Laptop/Desktop computers. From here, data is forwarded to remote computers for higher-level analysis and feedback using traditional cellular and satellite communication or the Ethernet infrastructure. This system offers a compact size, lower cost

  6. A Framework for Secure and Survivable Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mi Chaw Mon THEIN

    2009-01-01

    Full Text Available Wireless sensor networks increasingly become viable solutions tomany challenging problems and will successively be deployed in many areas inthe future. A wireless sensor network (WSN is vulnerable to security attacksdue to the insecure communication channels, limited computational andcommunication capabilities and unattended nature of sensor node devices,limited energy resources and memory. Security and survivability of thesesystems are receiving increasing attention, particularly critical infrastructureprotection. So we need to design a framework that provide both security andsurvivability for WSNs. To meet this goals, we propose a framework for secureand survivable WSNs and we present a key management scheme as a case studyto prevent the sensor networks being compromised by an adversary. This paperalso considers survivability strategies for the sensor network against a variety ofthreats that can lead to the failure of the base station, which represents a centralpoint of failure.

  7. An Efficient Key Management Protocol for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    ZENG Qingguang; CUI Yanling; LUO Juan

    2006-01-01

    Key management is a fundamental security service in wireless sensor networks. The communication security problems for these networks are exacerbated by the limited power and energy of the sensor devices. In this paper, we describe the design and implementation of an efficient key management scheme based on low energy adaptive clustering hierarchy(LEACH) for wireless sensor networks. The design of the protocol is motivated by the observation that many sensor nodes in the network play different roles. The paper presents different keys are set to the sensors for meeting different transmitting messages and variable security requirements. Simulation results show that our key management protocol based-on LEACH can achieve better performance. The energy consumption overhead introduced is remarkably low compared with the original Kerberos schemes.

  8. Secured Greedy Perimeter Stateless Routing for Wireless Sensor Networks

    CERN Document Server

    Samundiswary, P; Dananjayan, P

    2010-01-01

    Wireless sensor networks are collections of large number of sensor nodes. The sensor nodes are featured with limited energy, computation and transmission power. Each node in the network coordinates with every other node in forwarding their packets to reach the destination. Since these nodes operate in a physically insecure environment; they are vulnerable to different types of attacks such as selective forwarding and sinkhole. These attacks can inject malicious packets by compromising the node. Geographical routing protocols of wireless sensor networks have been developed without considering the security aspects against these attacks. In this paper, a secure routing protocol named secured greedy perimeter stateless routing protocol (S-GPSR) is proposed for mobile sensor networks by incorporating trust based mechanism in the existing greedy perimeter stateless routing protocol (GPSR). Simulation results prove that S-GPSR outperforms the GPSR by reducing the overhead and improving the delivery ratio of the netw...

  9. Standards-Based Wireless Sensor Networking Protocols for Spaceflight Applications

    Science.gov (United States)

    Wagner, Raymond S.

    2010-01-01

    Wireless sensor networks (WSNs) have the capacity to revolutionize data gathering in both spaceflight and terrestrial applications. WSNs provide a huge advantage over traditional, wired instrumentation since they do not require wiring trunks to connect sensors to a central hub. This allows for easy sensor installation in hard to reach locations, easy expansion of the number of sensors or sensing modalities, and reduction in both system cost and weight. While this technology offers unprecedented flexibility and adaptability, implementing it in practice is not without its difficulties. Recent advances in standards-based WSN protocols for industrial control applications have come a long way to solving many of the challenges facing practical WSN deployments. In this paper, we will overview two of the more promising candidates - WirelessHART from the HART Communication Foundation and ISA100.11a from the International Society of Automation - and present the architecture for a new standards-based sensor node for networking and applications research.

  10. Vehicle Identification using Discrete Spectrums in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Seung S. Yang

    2008-04-01

    Full Text Available We studied the possibility of using wireless sensor networks for vehicle identification in a large open field. This is exciting research in that it not only presents a challenge but has practicality. The challenge here is to develop algorithms and/or protocols for sensor nodes to execute a given task. Since each sensor node has limited computation and communication capabilities, these limitations prohibit the use of algorithms and/or protocols developed for conventional computers and networks. Each sensor is dispensable and easily deployable, it can do meaningful work when it is collaborated as a networked cluster; therefore it is very practical in application. Our goal is to identify vehicles in real time using acoustic signal sensors and wireless networks. Our contribution in this paper is three fold. First, we developed a simple vehicle sound identification algorithm enough to be implemented for capacity limited sensor nodes. Second, we proposed architecture and protocols of wireless sensor networks for vehicle identification using this developed sound classification algorithm. Third, we proposed a cooperation model among sensors to expedite the classification process. Our preliminary results show the proposed architecture and protocols are promising.

  11. Autonomous chemical and biological miniature wireless-sensor

    Science.gov (United States)

    Goldberg, Bar-Giora

    2005-05-01

    The presentation discusses a new concept and a paradigm shift in biological, chemical and explosive sensor system design and deployment. From large, heavy, centralized and expensive systems to distributed wireless sensor networks utilizing miniature platforms (nodes) that are lightweight, low cost and wirelessly connected. These new systems are possible due to the emergence and convergence of new innovative radio, imaging, networking and sensor technologies. Miniature integrated radio-sensor networks, is a technology whose time has come. These network systems are based on large numbers of distributed low cost and short-range wireless platforms that sense and process their environment and communicate data thru a network to a command center. The recent emergence of chemical and explosive sensor technology based on silicon nanostructures, coupled with the fast evolution of low-cost CMOS imagers, low power DSP engines and integrated radio chips, has created an opportunity to realize the vision of autonomous wireless networks. These threat detection networks will perform sophisticated analysis at the sensor node and convey alarm information up the command chain. Sensor networks of this type are expected to revolutionize the ability to detect and locate biological, chemical, or explosive threats. The ability to distribute large numbers of low-cost sensors over large areas enables these devices to be close to the targeted threats and therefore improve detection efficiencies and enable rapid counter responses. These sensor networks will be used for homeland security, shipping container monitoring, and other applications such as laboratory medical analysis, drug discovery, automotive, environmental and/or in-vivo monitoring. Avaak"s system concept is to image a chromatic biological, chemical and/or explosive sensor utilizing a digital imager, analyze the images and distribute alarm or image data wirelessly through the network. All the imaging, processing and communications

  12. Model-Based Event Detection in Wireless Sensor Networks

    CERN Document Server

    Gupchup, Jayant; Burns, Randal; Szalay, Alex

    2009-01-01

    In this paper we present an application of techniques from statistical signal processing to the problem of event detection in wireless sensor networks used for environmental monitoring. The proposed approach uses the well-established Principal Component Analysis (PCA) technique to build a compact model of the observed phenomena that is able to capture daily and seasonal trends in the collected measurements. We then use the divergence between actual measurements and model predictions to detect the existence of discrete events within the collected data streams. Our preliminary results show that this event detection mechanism is sensitive enough to detect the onset of rain events using the temperature modality of a wireless sensor network.

  13. Wireless ad hoc and sensor networks management, performance, and applications

    CERN Document Server

    He, Jing

    2013-01-01

    Although wireless sensor networks (WSNs) have been employed across a wide range of applications, there are very few books that emphasize the algorithm description, performance analysis, and applications of network management techniques in WSNs. Filling this need, Wireless Ad Hoc and Sensor Networks: Management, Performance, and Applications summarizes not only traditional and classical network management techniques, but also state-of-the-art techniques in this area. The articles presented are expository, but scholarly in nature, including the appropriate history background, a review of current

  14. The UWB Solution for Multimedia Traffic in Wireless Sensor Networks

    CERN Document Server

    Boudhir, A A; Ahmed, M Ben; Said, Elbrak; 10.5121/ijwmn

    2011-01-01

    Several researches are focused on the QoS (Quality of Service) and Energy consumption in wireless Multimedia Sensor Networks. Those research projects invest in theory and practice in order to extend the spectrum of use of norms, standards and technologies which are emerged in wireless communications. The performance of these technologies is strongly related to domains of use and limitations of their characteristics. In this paper, we give a comparison of ZigBee technology, most widely used in sensor networks, and UWB (Ultra Wide Band) which presents itself as competitor that present in these work better results for audiovisual applications with medium-range and high throughput.

  15. Towards a Wireless Sensor Platform for Energy Efficient Building Operation

    Institute of Scientific and Technical Information of China (English)

    Karsten Menzel; Dirk Pesch; Brendan O'Flynn; Marcus Keane; Cian O'Mathuna

    2008-01-01

    Currently, the IT-support for energy performance rating of buildings is insufficient. So-called IT-platforms often "built" of an ad-hoc, inconsistent combination of off-the-shelf building management compo-nents, distributed data metering equipment and several monitoring software tools. A promising approach to achieve consistent, holistic performance data management is the implementation of an integrated, modular wireless sensor platform. This paper presents an approach of how wireless sensors can be seamlessly inte-grated into existing and future intelligent building management systems supporting improved building per-formance and diagnostics with an emphasis on energy management.

  16. Characteristics of Key Update Strategies for Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Yuksel, Ender; Nielson, Hanne Riis; Nielson, Flemming

    2011-01-01

    Wireless sensor networks offer the advantages of simple and low-resource communication. Challenged by this simplicity and low-resources, security is of particular importance in many cases such as transmission of sensitive data or strict requirements of tamper-resistance. Updating the security keys...... is one of the essential points in security, which restrict the amount of data that may be exposed when a key is compromised. In this paper, we investigate key update methods that may be used in wireless sensor networks, and benefiting from stochastic model checking we derive characteristics...

  17. Time Synchronization in Hierarchical TESLA Wireless Sensor Networks

    Energy Technology Data Exchange (ETDEWEB)

    Jason L. Wright; Milos Manic

    2009-08-01

    Time synchronization and event time correlation are important in wireless sensor networks. In particular, time is used to create a sequence events or time line to answer questions of cause and effect. Time is also used as a basis for determining the freshness of received packets and the validity of cryptographic certificates. This paper presents secure method of time synchronization and event time correlation for TESLA-based hierarchical wireless sensor networks. The method demonstrates that events in a TESLA network can be accurately timestamped by adding only a few pieces of data to the existing protocol.

  18. Sensors on speaking terms: Schedule-based medium access control protocols for wireless sensor networks

    NARCIS (Netherlands)

    van Hoesel, L.F.W.

    2007-01-01

    Wireless sensor networks make the previously unobservable, observable. The basic idea behind these networks is straightforward: all wires are cut in traditional sensing systems and the sensors are equipped with batteries and radio's to virtually restore the cut wires. The resulting sensors can be pl

  19. Sensors on speaking terms : schedule-based medium access control protocols for wireless sensor networks

    NARCIS (Netherlands)

    Hoesel, van Lodewijk Frans Willem

    2007-01-01

    Wireless sensor networks make the previously unobservable, observable. The basic idea behind these networks is straightforward: all wires are cut in traditional sensing systems and the sensors are equipped with batteries and radio’s to virtually restore the cut wires. The resulting sensors can be pl

  20. Analyzing Multimode Wireless Sensor Networks Using the Network Calculus

    Directory of Open Access Journals (Sweden)

    Xi Jin

    2015-01-01

    Full Text Available The network calculus is a powerful tool to analyze the performance of wireless sensor networks. But the original network calculus can only model the single-mode wireless sensor network. In this paper, we combine the original network calculus with the multimode model to analyze the maximum delay bound of the flow of interest in the multimode wireless sensor network. There are two combined methods A-MM and N-MM. The method A-MM models the whole network as a multimode component, and the method N-MM models each node as a multimode component. We prove that the maximum delay bound computed by the method A-MM is tighter than or equal to that computed by the method N-MM. Experiments show that our proposed methods can significantly decrease the analytical delay bound comparing with the separate flow analysis method. For the large-scale wireless sensor network with 32 thousands of sensor nodes, our proposed methods can decrease about 70% of the analytical delay bound.

  1. DEVELOPING A WIRELESS SENSOR NETWORD WITH RFID CAPABILITIES

    Directory of Open Access Journals (Sweden)

    Dan LICA

    2016-05-01

    Full Text Available The concept underlying the pervasive communications systems is Internet of Objects, defined as a global network of smart objects, resulting in "attachment" of communication functions, data acquisition, data processing objects we interact with daily. Internet of Objects will be based on 4th generation of Internet systems. In such systems, each intelligent networked device must offer its users a number of services, which constitute a development of the current model of Web services. Such services will result from aggregation of micro services offered by each pervasive device connected to the Internet. Aggregating these micro services requires that each node in the network has the opportunity to present / expose its capabilities (so-called "advertising" in a standard way for client applications to be integrated into complex services. Therefore there appears the need to introduce a coding scheme to identity the nodes in the network, enabling the identification of their capabilities. An alternative to implementing such a system of encoding / identifying characteristics of network nodes is active RFID technology. The aim of this chapter is to develop a method to ensure the convergence of wireless sensor networks with active RFID systems within a pervasive hybrid network based on the IEEE 802.15.4 standard, which satisfies the Internet of Objects network.

  2. A Novel Energy efficient Surface water Wireless Sensor Network Algorithm

    Directory of Open Access Journals (Sweden)

    B.Meenakshi

    2012-07-01

    Full Text Available Maintaining the energy of sensors in Wireless Sensor Network (WSN is important in critical applications. It has been a challenge to design wireless sensor networks to enable applications for oceanographicdata collection, pollution monitoring, offshore exploration, disaster prevention, assisted navigation and tactical surveillance applications. WSN consists of sensor nodes which sense the physical parameters such as temperature, humidity, pressure and light etc and send them to a fusion center namely Base Station (BS from where one can get the value of physical parameters at any time. Requirement of monitoring the environment might be anywhere, like middle of the sea or under the earth where man cannot go often to recharge the batterieswhich supplies the sensing device, transceiver and memory unit in the sensor node. So the usage of the battery power must be judicious in WSN. Earlier attempts have been made to prolong the network lifetime, but still it is a challenging task. In this paper we propose a Novel Energy efficient Surface water Wireless Sensor Network Algorithm (NES-WSN to optimize the energy consumption by WSN. The present work concentrates on energy saving of sensor nodes when they are deployed in the surface of the sea water. Whenever the sea surface temperature increases there will be a power loss which is reduced by clustering the nodes and by transferring data through multihop routing. Experimental results show that due to increase in temperature there is a definite power loss and it can be minimized by using NES-WSN algorithm definitely.

  3. Sensor selection for received signal strength-based source localization in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Generally, localization is a nonlinear problem, while linearization is used to simplify this problem. Reasonable approximations could be achieved when signal-to-noise ratio (SNR) is large enough. Energy is a critical resource in wireless sensor networks, and system lifetime needs to be prolonged through the use of energy efficient strategies during system operation. In this paper, a closed-form solution for received signal strength (RSS)-based source localization in wireless sensor network (WSN) is obtained...

  4. A novel mathematical model for coverage in wireless sensor network

    Institute of Scientific and Technical Information of China (English)

    YAN Zhen-ya; ZHENG Bao-yu

    2006-01-01

    Coverage problem is one of the fundamental issues in the design of wireless sensor network, which has a great impact on the performance of sensor network. In this article,coverage problem was investigated using a mathematical model named Birth-death process. In this model, sensor nodes joining into networks at every period of time is considered as the rebirth of network and the quitting of sensor nodes from the networks is considered as the death of the network. In the end, an analytical solution is used to investigate the appropriate rate to meet the coverage requirement.

  5. Wireless Magnetoelastic Resonance Sensors: A Critical Review

    Directory of Open Access Journals (Sweden)

    Keat G. Ong

    2002-07-01

    Full Text Available This paper presents a comprehensive review of magnetoelastic environmental sensor technology; topics include operating physics, sensor design, and illustrative applications. Magnetoelastic sensors are made of amorphous metallic glass ribbons or wires, with a characteristic resonant frequency inversely proportional to length. The remotely detected resonant frequency of a magnetoelastic sensor shifts in response to different physical parameters including stress, pressure, temperature, flow velocity, liquid viscosity, magnetic field, and mass loading. Coating the magnetoelastic sensor with a mass changing, chemically responsive layer enables realization of chemical sensors. Magnetoelastic sensors can be remotely interrogated by magnetic, acoustic, or optical means. The sensors can be characterized in the time domain, where the resonant frequency is determined through analysis of the sensor transient response, or in the frequency domain where the resonant frequency is determined from the frequency-amplitude spectrum of the sensor.

  6. Hybrid RRM Architecture for Future Wireless Networks

    DEFF Research Database (Denmark)

    Tragos, Elias; Mihovska, Albena D.; Mino, Emilio

    2007-01-01

    The concept of ubiquitous and scalable system is applied in the IST WINNER II [1] project to deliver optimum performance for different deployment scenarios from local area to wide area wireless networks. The integration of cellular and local area networks in a unique radio system will provide a g...

  7. Burstiness-Aware Congestion Control Protocol for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Liang Lulu; Gao Deyun; Qin Yajuan; Zhang Hongke

    2011-01-01

    In monitoring Wireless Sensor Networks (WSNs),the traffic usually has bursty characteristics when an event occurs.Transient congestion would increase delay and packet loss rate severely,which greatly reduces network performance.To solve this problem,we propose a Burstiness-aware Congestion.Control Protocol (BCCP) for wireless sensor networks.In BCCP,the backoff delay is adopted as a congestion indication.Normally,sensor nodes work on contention-based MAC protocol (such as CSMA/CA).However,when congestion occurs,localized TDMA instead of CSMA/CA is embedded into the nodes around the congestion area.Thus,the congestion nodes only deliver their data during their assigned slots to alleviate the contention-caused congestion.Finally,we implement BCCP in our sensor network testbed.The experiment results show that BCCP could detect area congestion in time,and improve the network performance significantly in terms of delay and packet loss rate.

  8. Optimized algorithm for balancing clusters in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    Mucheol KIM; Sun-hong KIM; Hyungjin BYUN; Sang-yong HAN

    2009-01-01

    Wireless sensor networks consist of hundreds or thousands of sensor nodes that involve numerous restrictions including computation capability and battery capacity. Topology control is an important issue for achieving a balanced placement of sensor nodes. The clustering scheme is a widely known and efficient means of topology control for transmitting information to the base station in two hops. The automatic routing scheme of the self-organizing technique is another critical element of wireless sensor networks. In this paper we propose an optimal algorithm with cluster balance taken into consideration, and compare it with three well known and widely used approaches, I.e., LEACH, MEER, and VAP-E, in performance evaluation. Experimental results show that the proposed approach increases the overall network lifetime, indicating that the amount of energy required for communication to the base station will be reduced for locating an optimal cluster.

  9. Triangle-based key management scheme for wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    Hangyang DAI; Hongbing XU

    2009-01-01

    For security services in wireless sensor net-works, key management is a fundamental building block.In this article, we propose a triangle-based key predis-tribution approach and show that it can improve the effectiveness of key management in wireless sensor networks. This is achieved by using the bivariate polynomial in a triangle deployment system based on deployment information about expected locations of the sensor nodes. The analysis indicates that this scheme can achieve higher probability of both direct key establishment and indirect key establishment. On the other hand, the security analysis shows that its security against node capture would increase with a decrease of the sensor node deployment density and size of the deployment model and an increase of the polynomial degree.

  10. A Fatigue Measuring Protocol for Wireless Body Area Sensor Networks.

    Science.gov (United States)

    Akram, Sana; Javaid, Nadeem; Ahmad, Ashfaq; Khan, Zahoor Ali; Imran, Muhammad; Guizani, Mohsen; Hayat, Amir; Ilahi, Manzoor

    2015-12-01

    As players and soldiers preform strenuous exercises and do difficult and tiring duties, they are usually the common victims of muscular fatigue. Keeping this in mind, we propose FAtigue MEasurement (FAME) protocol for soccer players and soldiers using in-vivo sensors for Wireless Body Area Sensor Networks (WBASNs). In FAME, we introduce a composite parameter for fatigue measurement by setting a threshold level for each sensor. Whenever, any sensed data exceeds its threshold level, the players or soldiers are declared to be in a state of fatigue. Moreover, we use a vibration pad for the relaxation of fatigued muscles, and then utilize the vibrational energy by means of vibration detection circuit to recharge the in-vivo sensors. The induction circuit achieves about 68 % link efficiency. Simulation results show better performance of the proposed FAME protocol, in the chosen scenarios, as compared to an existing Wireless Soccer Team Monitoring (WSTM) protocol in terms of the selected metrics.

  11. Energy Efficient Moving Target Tracking in Wireless Sensor Networks.

    Science.gov (United States)

    Wen, Yingyou; Gao, Rui; Zhao, Hong

    2016-01-02

    Moving target tracking in wireless sensor networks is of paramount importance. This paper considers the problem of state estimation for L-sensor linear dynamic systems. Firstly, the paper establishes the fuzzy model for measurement condition estimation. Then, Generalized Kalman Filter design is performed to incorporate the novel neighborhood function and the target motion information, improving with an increasing number of active sensors. The proposed measurement selection approach has some advantages in time cost. As such, if the desired accuracy has been achieved, the parameter initialization for optimization can be readily resolved, which maximizes the expected lifespan while preserving tracking accuracy. Through theoretical justifications and empirical studies, we demonstrate that the proposed scheme achieves substantially superior performances over conventional methods in terms of moving target tracking under the resource-constrained wireless sensor networks.

  12. Design and validation of wireless acceleration sensor network for structural health monitoring

    Institute of Scientific and Technical Information of China (English)

    Yu Yan; Ou Jinping

    2006-01-01

    A wireless sensor network is proposed to monitor the acceleration of structures for the purpose of structural health monitoring of civil engineering structures. Using commercially available parts, several modules are constructed and integrated into complete wireless sensors and base stations. The communication protocol is designed and the fusion arithmetic of the temperature and acceleration is embedded in the wireless sensor node so that the measured acceleration values are more accurate. Measures are adopted to finish energy optimization, which is an important issue for a wireless sensor network. The test is performed on an offshore platform model, and the experimental results are given to show the feasibility of the designed wireless sensor network.

  13. A Survey on Threats and Security schemes in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    P.P.Joby

    2015-01-01

    Full Text Available It is difficult to achieve and become particularly acute in wireless sensor networks due to the limitation in network capability, computational power and memory which do not allow for implementation of complex security mechanism because security being vital to the acceptance and use of wireless sensor networks for many applications. In this paper we have explored general security threats in wireless sensor networks and analyzed them. This paper is an attempt to survey and analyze the threats to the wireless sensor networks and focus on the type of attacks and achieve secure communication in wireless sensor networks.

  14. Bluetooth Platform for Wireless Measurements Using Industrial Sensors

    Directory of Open Access Journals (Sweden)

    Tadej Tašner

    2013-01-01

    Full Text Available The past decade has seen significant advancement in the field of mobile devices. Various smart devices such as cellular phones, tablets and PDAs have become universal tools in our everyday lives. Their versatility is based on their computing power, portability and their integration with other devices and services such as the World Wide Web. However, these smart devices have an even wider usability spectrum. They can also be used for wireless industrial measurements using existing sensors. The wireless connectivity of existing industrial sensors is achieved by equipping them with a Bluetooth module, which digitizes the data and passes it to any Bluetooth capable smart device for further processing, evaluation and logging. This paper describes the specially designed Bluetooth platform for wireless measurements all the way from the basic concept, through hardware, firmware and software implementation, to the sample tests and measurements.

  15. Evaluation of Communication Overheads in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Shiv Prasad Kori1 , Dr. R. K . Baghel2

    2013-04-01

    Full Text Available Wireless sensor network are collection of small sensing self powered nodes organized into a cooperative network which have certain processing capabilities and the nodes communicate wirelessly. Sensing, processing and communication are three key elements whose combination in one node gives rise to a vast number of applications of wireless sensor networks in areas such as environmental monitoring, warfare, education, agriculture to name a few. In the present work, the comparative evaluation of communication overhead due to sink mobility with speed variations, the effect of update time variation, the effect of number of nodes used in the wirelesssensor networks is carried out. It has been observed that communication overheads increasesignificantly when sink mobility is high. The communication overheads can be reduced by increasing update time

  16. The Reliability of Wireless Sensor Network on Pipeline Monitoring System

    Directory of Open Access Journals (Sweden)

    Hafizh Prihtiadi

    2017-06-01

    Full Text Available The wireless sensor network (WSN is an attractive technology, which combines embedded systems and communication networks making them more efficient and effective. Currently, WSNs have been developed for various monitoring applications. In this research, a wireless mesh network for a pipeline monitoring system was designed and developed. Sensor nodes were placed at each branch in the pipe system. Some router fails were simulated and the response of each node in the network was evaluated. Three different scenarios were examined to test the data transmission performance. The results proved that the wireless mesh network was reliable and robust. The system is able to perform link reconfiguration, automatic routing and safe data transmission from the beginning node to the end node.

  17. Wireless intelligent alarm technology with pyroelectric infrared sensor

    Science.gov (United States)

    Chen, Xiao

    2009-07-01

    Aiming at the defects of monitoring conducted by man in the conventional practice, we study the passive intelligent automatic alarm technology based on the pyroelectric infrared sensor and wireless communication technology. The designed passive infrared wireless alarm is composed of pyroelectric infrared sensors, infrared special chip BISS0001 and their peripheral circuits. When someone enters into the detecting and monitoring range, the alarm will detect the infrared ray of the human radiation by the contactless form and detect the signals of circuit output. Then it translates them into low frequency signals relative with human sports speed, distance and direction, produce corresponding output signals through amplifying by the back state controller, switch on the work power of the wireless transmitting circuit and make it emit the alarm signals. The system enhances the monitoring level and effects and possesses many advantages such as wide detecting range, long detecting distance and high reliability.

  18. Reliability Analysis of Wireless Sensor Networks Using Markovian Model

    Directory of Open Access Journals (Sweden)

    Jin Zhu

    2012-01-01

    Full Text Available This paper investigates reliability analysis of wireless sensor networks whose topology is switching among possible connections which are governed by a Markovian chain. We give the quantized relations between network topology, data acquisition rate, nodes' calculation ability, and network reliability. By applying Lyapunov method, sufficient conditions of network reliability are proposed for such topology switching networks with constant or varying data acquisition rate. With the conditions satisfied, the quantity of data transported over wireless network node will not exceed node capacity such that reliability is ensured. Our theoretical work helps to provide a deeper understanding of real-world wireless sensor networks, which may find its application in the fields of network design and topology control.

  19. Wireless powering for low-power distributed sensors

    Directory of Open Access Journals (Sweden)

    Popović Zoya B.

    2006-01-01

    Full Text Available In this paper, an overview of the field of wireless powering is presented with an emphasis on low-power applications. Several rectenna elements and arrays are discussed in more detail: (1 a 10-GHz array for powering sensors in aircraft wings; (2 a single antenna in the 2.4-GHz ISM band for low-power assisted-living sensors; and (3 a broadband array for power harvesting in the 2-18GHz frequency range.

  20. Multiband sensors for wireless electromagnetic field monitoring system - SEMONT

    OpenAIRE

    Milutinov, Miodrag; id_orcid 0000-0002-1725-3405; Đurić, Nikola; Pekarić-Nađ, Neda; Mišković, Dragiša; Knežević, Dragan

    2012-01-01

    Substantial effort has been made to employ wireless sensor network and Internet technologies for environmental and habitat protection. Several monitoring systems are designed to collect data regarding temperature, humidity, pressure and some other environmental parameters, amongst which recently there is the exposure to electromagnetic field. In this paper, some basic features of the multiband sensors that are incorporated into the Serbian electromagnetic field monitoring network - SEMONT are...

  1. The Electromagnetic Compatibility Design of the Wireless Sensor Network Node

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>This paper is concerned with the sensor nodes’ hardware design of the wireless sensor network.We focus on the electromagnetic compatibility design of the printed circuit board.In this paper,we will give a schematic diagram first,and then,according to the layout,wiring rules and the knowledge of electromagnetic compatibility, we will present the design of the printed circuit board which has a good characteristic of electromagnetic compatibility.

  2. A Novel Wireless and Temperature-Compensated SAW Vibration Sensor

    OpenAIRE

    Wen Wang; Xufeng Xue; Yangqing Huang; Xinlu Liu

    2014-01-01

    A novel wireless and passive surface acoustic wave (SAW) based temperature-compensated vibration sensor utilizing a flexible Y-cut quartz cantilever beam with a relatively substantial proof mass and two one-port resonators is developed. One resonator acts as the sensing device adjacent to the clamped end for maximum strain sensitivity, and the other one is used as the reference located on clamped end for temperature compensation for vibration sensor through the differential approach. Vibrati...

  3. Analysis of energy consumption nodes wireless sensor networks

    Directory of Open Access Journals (Sweden)

    Павел Викторович Галкин

    2014-09-01

    Full Text Available The article considers the issue of energy consumption and energy efficiency of the nodes of wireless sensor networks (WSN. It is revealed that the main factor influencing the increase in the probability of a malfunction of sensor networks is the limited resources of the power node. The methodology of calculation of energy consumption of nodes and the lifetime of the elements of their power.

  4. Disjoint Key Establishment Protocol for Wireless Sensor and Actor Networks

    OpenAIRE

    AtaUllah Ghafoor; Muhammad Sher; Muhammad Imran; Imran Baig

    2016-01-01

    Key distribution is essential for providing secure communication between commercial and sensitive applications of wireless sensor and actor networks (WSANs). It becomes more challenging when any of the intermediate sensor nodes is compromised by the adversaries as the messages carrying secure keys will be exposed and links will be unreliable. This paper presents a Disjoint Key Establishment Protocol (DKEP) that does not require transmitting keys across the nodes. In DKEP, each node is preload...

  5. The Effect of Physical Topology on Wireless Sensor Network Lifetime

    OpenAIRE

    Debdhanit Yupho; Joseph Kabara

    2007-01-01

    Wireless sensor networks must measure environmental conditions, such as temperature, over extended periods and therefore require a long system lifetime. The design of long lifetime networks in turn requires efficient sensor node circuits, algorithms, and protocols. Protocols such as GSP (Gossip-based Sleep Protocol) have been shown to mitigate energy consumption in idle listening and receiving, by turning off the receiver circuit. However, previous studies of network lifetime have been based ...

  6. Adaptive Information Access on Multiple Applications Support Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Tobgay, Sonam; Olsen, Rasmus Løvenstein; Prasad, Ramjee

    2014-01-01

    information is challenged by dynamic nature of information elements. These challenges are more prominent in case of wireless sensor network (WSN) applications, as the information that the sensor node collects are mostly dynamic in nature (say, temperature). Therefore, it is likely that there can be a mismatch...... information access mechanism and show how trade-off between energy consumption and information reliability can be achieved....

  7. Wireless sensor networks for monitoring physiological signals of multiple patients.

    Science.gov (United States)

    Dilmaghani, R S; Bobarshad, H; Ghavami, M; Choobkar, S; Wolfe, C

    2011-08-01

    This paper presents the design of a novel wireless sensor network structure to monitor patients with chronic diseases in their own homes through a remote monitoring system of physiological signals. Currently, most of the monitoring systems send patients' data to a hospital with the aid of personal computers (PC) located in the patients' home. Here, we present a new design which eliminates the need for a PC. The proposed remote monitoring system is a wireless sensor network with the nodes of the network installed in the patients' homes. These nodes are then connected to a central node located at a hospital through an Internet connection. The nodes of the proposed wireless sensor network are created by using a combination of ECG sensors, MSP430 microcontrollers, a CC2500 low-power wireless radio, and a network protocol called the SimpliciTI protocol. ECG signals are first sampled by a small portable device which each patient carries. The captured signals are then wirelessly transmitted to an access point located within the patients' home. This connectivity is based on wireless data transmission at 2.4-GHz frequency. The access point is also a small box attached to the Internet through a home asynchronous digital subscriber line router. Afterwards, the data are sent to the hospital via the Internet in real time for analysis and/or storage. The benefits of this remote monitoring are wide ranging: the patients can continue their normal lives, they do not need a PC all of the time, their risk of infection is reduced, costs significantly decrease for the hospital, and clinicians can check data in a short time.

  8. Quality-Aware Resource Management for Wireless Sensor Networks

    NARCIS (Netherlands)

    Gemesi, R.; Meratnia, Nirvana; Havinga, Paul J.M.; Anderson, J.H.; Prencipe, G.; Wattenhoffer, R.

    2005-01-01

    Due to the distributed and resource constrained nature of wireless sensor networks, their design proves to be difficult. We present a resource management framework, which integrates a data-centric lightweight operating system with a publish/subscribe middleware. In this framework, the main system

  9. Key Management Building Blocks for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Palaniswami, M.

    2007-01-01

    Cryptography is the means to ensure data confidentiality, integrity and authentication in wireless sensor networks (WSNs). To use cryptography effectively however, the cryptographic keys need to be managed properly. First of all, the necessary keys need to be distributed to the nodes before the node

  10. Wireless-accessible sensor populations for monitoring biological variables

    NARCIS (Netherlands)

    Mazzu, Marco; Scalvini, Simonetta; Giordano, A.; Frumento, E.; Wells, Hannah; Lokhorst, C.; Glisenti, Fulvio

    2008-01-01

    The current health-care infrastructure is generally considered to be inadequate to meet the needs of an increasingly older population. We have investigated the feasibility of a passive in-home monitoring system based on wireless accessible sensor populations (WASP). In an EU-funded project we have

  11. Information transmission using UEP turbo codes in wireless sensor networks

    Science.gov (United States)

    Zhou, Zude; Xu, Chao

    2005-11-01

    Wireless sensing is prevalent quickly in these years, and it has many advantages, such as fewer catastrophic failures, conservation of natural resources, improved emergency response, etc. Wireless sensors can be deployed in extremely hostile environment. Since the wireless sensors are energy constrained, many researches have been in progress to solve these problems. In this paper, we proposed a joint source-channel coding scheme to solve energy efficiency of wireless sensors. Firstly, we decomposition information in wavelet domain, then compress it by using multi-scale embedded zerotree wavelet algorithm, and generate a bit stream that can be decompressed in a scalable bit rate. Then, we transmit the bit stream after encoding them with unequal error protection turbo codes to achieve error robust transmission. We transmit multiple bit streams according to some energy strategy, and redundancies to base stations are reduced by only transmitting coarse scale information. Due to the scalability of multi-scale EZW, we can adopt diversified bit rate strategy to save energy of battery powered sensors.

  12. Autonomous Vehicle Coordination with Wireless Sensor and Actuator Networks

    NARCIS (Netherlands)

    Marin-Perianu, Mihai; Bosch, Stephan; Marin-Perianu, Raluca; Scholten, Hans; Havinga, Paul

    2010-01-01

    A coordinated team of mobile wireless sensor and actuator nodes can bring numerous benefits for various applications in the field of cooperative surveillance, mapping unknown areas, disaster management, automated highway and space exploration. This article explores the idea of mobile nodes using veh

  13. A Latent Variable Clustering Method for Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Vasilev, Vladislav; Mihovska, Albena Dimitrova; Poulkov, Vladimir

    2016-01-01

    In this paper we derive a clustering method based on the Hidden Conditional Random Field (HCRF) model in order to maximizes the performance of a wireless sensor. Our novel approach to clustering in this paper is in the application of an index invariant graph that we defined in a previous work and...

  14. Key Management Building Blocks for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Palaniswami, M

    2007-01-01

    Cryptography is the means to ensure data confidentiality, integrity and authentication in wireless sensor networks (WSNs). To use cryptography effectively however, the cryptographic keys need to be managed properly. First of all, the necessary keys need to be distributed to the nodes before the

  15. Multi-channel wireless sensor networks : protocols, design and evaluation

    NARCIS (Netherlands)

    Durmaz Incel, Özlem

    2009-01-01

    Pervasive systems, which are described as networked embedded systems integrated with everyday environments, are considered to have the potential to change our daily lives by creating smart surroundings and by their ubiquity, just as the Internet. In the last decade, “Wireless Sensor Networks” have a

  16. A Survey on Coverage Control Protocols in Wireless Sensor Networks

    OpenAIRE

    2013-01-01

    Coverage control algorithms play an important role in Wireless sensor network. Effective coverage control algorithms sense its coverage area with less energy spent. These coverage control models falls under various approaches like clustering, evolutionary, mobility based approaches. This paper makes a detailed survey on coverage control protocols coming under various classifications. In addition, it also discussed several protocols working mechanism with its evaluation metrics.

  17. Helicopter Rotor Blade Monitoring using Autonomous Wireless Sensor Network

    NARCIS (Netherlands)

    Sanchez Ramirez, Andrea; Loendersloot, Richard; Tinga, Tiedo; Basu, B.

    2013-01-01

    The advancement on Wireless Sensor Networks for vibration monitoring presents important possibilities for helicopter rotor health and usage monitoring. While main rotor blades account for the main source of lift for helicopters, rotor induced vibration establishes an important source for understandi

  18. Energy Aware Cluster Based Routing Scheme For Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Roy Sohini

    2015-09-01

    Full Text Available Wireless Sensor Network (WSN has emerged as an important supplement to the modern wireless communication systems due to its wide range of applications. The recent researches are facing the various challenges of the sensor network more gracefully. However, energy efficiency has still remained a matter of concern for the researches. Meeting the countless security needs, timely data delivery and taking a quick action, efficient route selection and multi-path routing etc. can only be achieved at the cost of energy. Hierarchical routing is more useful in this regard. The proposed algorithm Energy Aware Cluster Based Routing Scheme (EACBRS aims at conserving energy with the help of hierarchical routing by calculating the optimum number of cluster heads for the network, selecting energy-efficient route to the sink and by offering congestion control. Simulation results prove that EACBRS performs better than existing hierarchical routing algorithms like Distributed Energy-Efficient Clustering (DEEC algorithm for heterogeneous wireless sensor networks and Energy Efficient Heterogeneous Clustered scheme for Wireless Sensor Network (EEHC.

  19. Outlier Detection Techniques For Wireless Sensor Networks: A Survey

    NARCIS (Netherlands)

    Zhang, Y.; Meratnia, Nirvana; Havinga, Paul J.M.

    2008-01-01

    In the field of wireless sensor networks, measurements that significantly deviate from the normal pattern of sensed data are considered as outliers. The potential sources of outliers include noise and errors, events, and malicious attacks on the network. Traditional outlier detection techniques are

  20. Survey and benchmark of block ciphers for wireless sensor networks

    NARCIS (Netherlands)

    Law, Yee Wei; Doumen, Jeroen; Hartel, Pieter

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. In this paper, we have identified the candidates of block ciphers

  1. Benchmarking Block Ciphers for Wireless Sensor Networks (Extended Abstract)

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, P.H.

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. We have identified the candidates of block ciphers suitable for W

  2. Measurement of dynamic comfort in cycling using wireless acceleration sensors

    NARCIS (Netherlands)

    Olieman, Mark; Marin-Perianu, Raluca; Marin-Perianu, Mihai

    2012-01-01

    Comfort in cycling is related to the level of vibration of the bicycle: more vibration results in less comfort for the rider. In this study, the level of vibration is measured in real time using wireless inertial acceleration sensors mounted at four places on the bike: front wheel axel, rear wheel a

  3. Distributed Event Detection in Wireless Sensor Networks for Disaster Management

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, Nirvana; Poel, Mannes; Taghikhaki, Zahra; Havinga, Paul J.M.

    2010-01-01

    Recently, wireless sensor networks (WSNs) have become mature enough to go beyond being simple fine-grained continuous monitoring platforms and become one of the enabling technologies for disaster early-warning systems. Event detection functionality of WSNs can be of great help and importance for

  4. Connected Dominating Set Based Topology Control in Wireless Sensor Networks

    Science.gov (United States)

    He, Jing

    2012-01-01

    Wireless Sensor Networks (WSNs) are now widely used for monitoring and controlling of systems where human intervention is not desirable or possible. Connected Dominating Sets (CDSs) based topology control in WSNs is one kind of hierarchical method to ensure sufficient coverage while reducing redundant connections in a relatively crowded network.…

  5. Wireless-accessible sensor populations for monitoring biological variables

    NARCIS (Netherlands)

    Mazzu, Marco; Scalvini, Simonetta; Giordano, A.; Frumento, E.; Wells, Hannah; Lokhorst, C.; Glisenti, Fulvio

    2008-01-01

    The current health-care infrastructure is generally considered to be inadequate to meet the needs of an increasingly older population. We have investigated the feasibility of a passive in-home monitoring system based on wireless accessible sensor populations (WASP). In an EU-funded project we have i

  6. Localization and Communication for UWB-based Wireless Sensor Networks

    NARCIS (Netherlands)

    Wang, Y.

    2011-01-01

    The great demand for location-aware wireless sensor networks (WSNs) motivates the research in this thesis. The unique characteristics of WSNs impose numerous challenges on localization and communication. In this thesis, we handle some key challenges and provide affordable solutions. Impulse radio u

  7. Benchmarking Block Ciphers for Wireless Sensor Networks (Extended Abstract)

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, Pieter H.

    2004-01-01

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. We have identified the candidates of block ciphers suitable for

  8. Survey and Benchmark of Block Ciphers for Wireless Sensor Networks

    NARCIS (Netherlands)

    Law, Y.W.; Doumen, J.M.; Hartel, Pieter H.

    Choosing the most storage- and energy-efficient block cipher specifically for wireless sensor networks (WSNs) is not as straightforward as it seems. To our knowledge so far, there is no systematic evaluation framework for the purpose. In this paper, we have identified the candidates of block ciphers

  9. Prototyping service discovery and usage in wireless sensor networks

    NARCIS (Netherlands)

    Marin-Perianu, Raluca; Scholten, Hans; Havinga, Paul

    2007-01-01

    Heterogeneous Wireless Sensor Networks (WSNs) are envisioned to provide different types of services in an open and dynamic environment. This paper presents the design, implementation and evaluation of a service discovery and usage solution for heterogeneous WSNs. The users have the possibility to di

  10. Data aggregation for target tracking in wireless sensor networks

    NARCIS (Netherlands)

    Lageweg, C.R; Janssen, J.A.A.J.; Ditzel, M.

    2006-01-01

    This paper presents the results of a study on the effects of data aggregation for target tracking in wireless sensor networks. In these networks energy, computing power and communication bandwidth are scarce. A novel approach towards data aggregation is proposed. It is tested in a simulation environ

  11. Performance analysis of data retrieval in wireless sensor networks

    NARCIS (Netherlands)

    Mitici, Mihaela Angelica

    2015-01-01

    In this thesis, we employ the theory of stochastic processes and queueing, combinatorial theory, stochastic dynamic programing to analyze the performance of wireless sensor networks, with a focus on data retrieval time, energy consumption and measurement reliability constraints. Firstly, we analyze

  12. Mobility-based Time References for Wireless Sensor Networks

    NARCIS (Netherlands)

    Sebastiano, F.

    2011-01-01

    Wireless Sensor Networks require small low-cost radios to enable communication among its nodes. Since those radios must be fully integrated to reduce cost and size, integration is required also for their on-board time references, which are needed to achieve synchronization with the other nodes. To d

  13. Multipath Routing with Erasure Coding for Wireless Sensor Networks

    NARCIS (Netherlands)

    Wu, Jian; Dulman, Stefan; Havinga, Paul; Nieberg, Tim

    2004-01-01

    Multipath routing algorithm in wireless sensor networks (WSN) increase the reliability of the system at the cost of significantly increased traffic. This paper introduces a splitted multipath routing scheme to improve the reliability of data routing in WSN by keeping the traffic at a low level. Our

  14. Prototyping Service Discovery and Usage in Wireless Sensor Networks

    NARCIS (Netherlands)

    Marin Perianu, Raluca; Scholten, Johan; Havinga, Paul J.M.

    2007-01-01

    Heterogeneous Wireless Sensor Networks (WSNs) are envisioned to provide different types of services in an open and dynamic environment. This paper presents the design, implementation and evaluation of a service discovery and usage solution for heterogeneous WSNs. The users have the possibility to

  15. Security in Wireless Sensor Networks Employing MACGSP6

    Science.gov (United States)

    Nitipaichit, Yuttasart

    2010-01-01

    Wireless Sensor Networks (WSNs) have unique characteristics which constrain them; including small energy stores, limited computation, and short range communication capability. Most traditional security algorithms use cryptographic primitives such as Public-key cryptography and are not optimized for energy usage. Employing these algorithms for the…

  16. Sustainable Performance in Energy Harvesting - Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Fafoutis, Xenofon; Di Mauro, Alessio; Dragoni, Nicola

    2013-01-01

    In this practical demo we illustrate the concept of "sustainable performance" in Energy-Harvesting Wireless Sensor Networks (EH-WSNs). In particular, for different classes of applications and under several energy harvesting scenarios, we show how it is possible to have sustainable performance when...... nodes in the network are powered by ambient energy....

  17. Connected Dominating Set Based Topology Control in Wireless Sensor Networks

    Science.gov (United States)

    He, Jing

    2012-01-01

    Wireless Sensor Networks (WSNs) are now widely used for monitoring and controlling of systems where human intervention is not desirable or possible. Connected Dominating Sets (CDSs) based topology control in WSNs is one kind of hierarchical method to ensure sufficient coverage while reducing redundant connections in a relatively crowded network.…

  18. Multi-Channel Wireless Sensor Networks: Protocols, Design and Evaluation

    NARCIS (Netherlands)

    Durmaz, O.

    2009-01-01

    Pervasive systems, which are described as networked embedded systems integrated with everyday environments, are considered to have the potential to change our daily lives by creating smart surroundings and by their ubiquity, just as the Internet. In the last decade, “Wireless Sensor Networks��? have

  19. Fast and Accurate Residential Fire Detection Using Wireless Sensor Networks

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, Nirvana; Havinga, Paul J.M.

    2010-01-01

    Prompt and accurate residential fire detection is important for on-time fire extinguishing and consequently reducing damages and life losses. To detect fire sensors are needed to measure the environmental parameters and algorithms are required to decide about occurrence of fire. Recently, wireless

  20. Energy-efficient hybrid media access control protocol in wireless sensor networks%一种节能混合无线传感器网络MAC协议

    Institute of Scientific and Technical Information of China (English)

    刘一哲; 袁睿翕

    2011-01-01

    针对无线传感器网络的节能和网络性能流量自适应的需求,在Z-MAC协议的基础上,提出了EFHMAC协议.经过分析表明,EHMAC在保持Z-MAC高信道利用率和低延迟的同时,可以减少Z-MAC低功耗侦听机制造成的大量串音能耗以及pream-ble传输所造成的网络开销.此外,EHMAC对Z-MAC在内的TDMA类协议无法应对的非对称隐藏终端问题提出了解决方案,取得了较高的网络吞吐量和较低的端到端延迟.%This paper puts forward an Energy-efficient Hybrid Media Access Control(EHMAC) protocol in WSNs,based on Z-MAC, in order to meet requirement of power consumption and obtain network performance adaptability to burst flow. Through analysis and NS2 simulation,this paper evaluates and verifies EHMAC's low power consumption due to Low Power Listening (LPL) and maintenance of high channel utilization as Z-MAC does.Meanwhile, EHMAC can decrease the long preamble overhead.Besides,EHMAC proposes the solution to asymmetric hidden terminal problem,and gets higher throughput and lower end to end delay than TDMA category protocol,Z-MAC included.

  1. ENERGY EFFICENT ROUTING PROTOCOL IN WIRELESS SENSOR NETWORK

    Directory of Open Access Journals (Sweden)

    SASMITA SAHOO

    2011-07-01

    Full Text Available Wireless sensor networks consist of small battery powered sensor nodes with limited energy resources. The area of wireless sensor networks is now attractive in the research area due to its applications in many fields such as defense security, civilian applications and medical research etc. In wireless sensor networks, the important task is to periodically collect data from an area of interest for time-sensitive applications. Then the sensed data must be gathered and transmitted to a base station for further processing to meet the end-user queries. Routing is a serious issue in WSN due to the use of computationally-constrained and resourceconstrainedmicro-sensors. Once the sensor nodes are deployed replacement is not feasible. Hence, energy efficiency is a key design issue to improve the life span of the network. Since the network consists of low-costnodes with limited battery power, it is a challenging task to design an efficient routing scheme that can offer good performance in energy efficiency, and long network lifetimes.

  2. High-Temperature SAW Wireless Strain Sensor with Langasite.

    Science.gov (United States)

    Shu, Lin; Peng, Bin; Yang, Zhengbing; Wang, Rui; Deng, Senyang; Liu, Xingzhao

    2015-11-11

    Two Surface acoustic wave (SAW) resonators were fabricated on langasite substrates with Euler angle of (0°, 138.5°, 117°) and (0°, 138.5°, 27°). A dipole antenna was bonded to the prepared SAW resonator to form a wireless sensor. The characteristics of the SAW sensors were measured by wireless frequency domain interrogation methods from 20 °C to 600 °C. Different temperature behaviors of the sensors were observed. Strain sensing was achieved using a cantilever configuration. The sensors were measured under applied strain from 20 °C to 500 °C. The shift of the resonance frequency contributed merely by strain is extracted from the combined effects of temperature and strain. Both the strain factors of the two SAW sensors increase with rising ambient temperature, and the SAW sensor deposited on (0°, 138.5°, 117°) cut is more sensitive to applied strain. The measurement errors of the two sensors are also discussed. The relative errors of the two sensors are between 0.63% and 2.09%. Even at 500 °C, the hysteresis errors of the two sensors are less than 5%.

  3. High-Temperature SAW Wireless Strain Sensor with Langasite

    Directory of Open Access Journals (Sweden)

    Lin Shu

    2015-11-01

    Full Text Available Two Surface acoustic wave (SAW resonators were fabricated on langasite substrates with Euler angle of (0°, 138.5°, 117° and (0°, 138.5°, 27°. A dipole antenna was bonded to the prepared SAW resonator to form a wireless sensor. The characteristics of the SAW sensors were measured by wireless frequency domain interrogation methods from 20 °C to 600 °C. Different temperature behaviors of the sensors were observed. Strain sensing was achieved using a cantilever configuration. The sensors were measured under applied strain from 20 °C to 500 °C. The shift of the resonance frequency contributed merely by strain is extracted from the combined effects of temperature and strain. Both the strain factors of the two SAW sensors increase with rising ambient temperature, and the SAW sensor deposited on (0°, 138.5°, 117° cut is more sensitive to applied strain. The measurement errors of the two sensors are also discussed. The relative errors of the two sensors are between 0.63% and 2.09%. Even at 500 °C, the hysteresis errors of the two sensors are less than 5%.

  4. Energy scavenging for long-term deployable wireless sensor networks.

    Science.gov (United States)

    Mathúna, Cian O; O'Donnell, Terence; Martinez-Catala, Rafael V; Rohan, James; O'Flynn, Brendan

    2008-05-15

    The coming decade will see the rapid emergence of low cost, intelligent, wireless sensors and their widespread deployment throughout our environment. While wearable systems will operate over communications ranges of less than a meter, building management systems will operate with inter-node communications ranges of the order of meters to tens of meters and remote environmental monitoring systems will require communications systems and associated energy systems that will allow reliable operation over kilometers. Autonomous power should allow wireless sensor nodes to operate in a "deploy and forget" mode. The use of rechargeable battery technology is problematic due to battery lifetime issues related to node power budget, battery self-discharge, number of recharge cycles and long-term environmental impact. Duty cycling of wireless sensor nodes with long "SLEEP" times minimises energy usage. A case study of a multi-sensor, wireless, building management system operating using the Zigbee protocol demonstrates that, even with a 1 min cycle time for an 864 ms "ACTIVE" mode, the sensor module is already in SLEEP mode for almost 99% of the time. For a 20-min cycle time, the energy utilisation in SLEEP mode exceeds the ACTIVE mode energy by almost a factor of three and thus dominates the module energy utilisation thereby providing the ultimate limit to the power system lifetime. Energy harvesting techniques can deliver energy densities of 7.5 mW/cm(2) from outdoor solar, 100 microW/cm(2) from indoor lighting, 100 microW/cm(3) from vibrational energy and 60 microW/cm(2) from thermal energy typically found in a building environment. A truly autonomous, "deploy and forget" battery-less system can be achieved by scaling the energy harvesting system to provide all the system energy needs. In the building management case study discussed, for duty cycles of less than 0.07% (i.e. in ACTIVE mode for 0.864 s every 20 min), energy harvester device dimensions of approximately 2 cm on a

  5. Thermoelectric Powered Wireless Sensors for Dry-Cask Storage

    Science.gov (United States)

    Carstens, Thomas Alan

    This study focuses on the development of self-powered wireless sensors. These sensors can be used to measure key parameters in extreme environments; e.g., temperature monitoring for spent nuclear fuel during dry-cask storage. This study has developed a design methodology for these self-powered monitoring systems. The main elements that constitute this work consist of selecting and testing a power source for the wireless sensor, determination of the attenuation of the wireless signal, and testing the wireless sensor circuitry in an extreme environment. OrigenArp determined the decay heat and gamma/neutron source strength of the spent fuel throughout the service life of the dry-cask. A first principles analysis modeled the temperatures inside the dry-cask. A finite-element heat transfer code calculated the temperature distribution of the thermoelectric and heat sink. The temperature distributions determine the power produced by the thermoelectric. It was experimentally verified that a thermoelectric generator (HZ-14) with a DC/DC converter (Linear Technology LTC3108EDE) can power a transceiver (EmbedRF) at condition which represent prototypical conditions throughout and beyond the service life of the dry-cask. The wireless sensor is required to broadcast with enough power to overcome the attenuation from the dry-cask. It will be important to minimize the attenuation of the signal in order to broadcast with a small transmission power. To investigate the signal transmission through the dry-cask, CST Microwave Studio was used to determine the scattering parameter S2,1 for a horizontal dry-cask. Important parameters that can influence the transmission of the signal are antenna orientation, antenna placement, and transmission frequency. The thermoelectric generator, DC/DC converter, and transceiver were exposed to 60Co gamma radiation (exposure rate170.3 Rad/min) at the University of Wisconsin Medical Radiation Research Center. The effects of gamma radiation on the

  6. The novel block encryption scheme based on hybrid chaotic maps for the wireless sensor networks%基于无线传感器网络的混合混沌新分组加密算法

    Institute of Scientific and Technical Information of China (English)

    佟晓筠; 左科; 王翥

    2012-01-01

    Traditional encryption schemes are not suitable for the Wireless sensor networks(WSNS) due to some intrinsic features of nodes in WSNS such as low energy,limited computation ability and storage resources.In this paper,we present a novel block encryption scheme based on hybrid chaotic maps dynamically and propose an integer digital random method,and the Feistel network structure, which is a kind of fast,secure,low resource consumption and suited for WSNS nodes encryption scheme.The experimental tests show the new encryption scheme has the following prefect performances:large key space,very good diffusion and disrupt performance, strict avalanche effect,excellent statistical balance and fast encryption speed of the new scheme,and the encryption scheme passes the SP800-22 test;meanwhile,the analysis and the testing of speed,time and storage space on the simulator platform show that this new encryption scheme is well able to hide the data information about the node in WSNS.%针对无线传感器网络(WSNS)中节点配备的能源少、节点计算能力低、存储资源有限以及化统的加密方法不适用于WSNS中等问题,提出了一种新的基于动态迭代的混合混沌方程及其整型数值化方法.并结合Feistel网络结构设计了一种快速、安全且资源消耗低的适用于WSNS节点的分组加密算法.通过对混合混沌分组加密算法进行了大量的实验测试之后,发现该算法具有密钥空间大、严格的雪崩效应、扩散及扰乱性高以及均等的统计平衡性等优点,同时该算法还成功地通过了SP800-22的严格测试;算法经过仿真器平台上运行的速度、时间及所占存储空间的测试分析,结果表明设计的混合混沌分组加密算法是完全能够通用于WSNS节点的数据加密.

  7. Passive Wireless Sensors for Spacecraft Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — New classes of sensors are needed on spacecraft that can be interrogated remotely using RF signals and respond with the sensor's identity as well as the...

  8. Wireless Sensor Networks : Structure and Algorithms

    NARCIS (Netherlands)

    van Dijk, T.C.

    2014-01-01

    In this thesis we look at various problems in wireless networking. First we consider two problems in physical-model networks. We introduce a new model for localisation. The model is based on a range-free model of radio transmissions. The first scheme is randomised and we analyse its expected perform

  9. Wireless Sensor Networks : Structure and Algorithms

    NARCIS (Netherlands)

    van Dijk, T.C.

    2014-01-01

    In this thesis we look at various problems in wireless networking. First we consider two problems in physical-model networks. We introduce a new model for localisation. The model is based on a range-free model of radio transmissions. The first scheme is randomised and we analyse its expected

  10. Energy-balanced multiple-sensor collaborative scheduling for maneuvering target tracking in wireless sensor networks

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    An energy-balanced multiple-sensor collaborative scheduling is proposed for maneuvering target tracking in wireless sensor networks (WSNs). According to the position of the maneuvering target, some sensor nodes in WSNs are awakened to form a sensor cluster for target tracking collaboratively. In the cluster, the cluster head node is selected to implement tracking task with changed sampling interval. The distributed interactive multiple model (IMM) filter is employed to estimate the target state. The estimat...

  11. Wireless Sensor Networks for Developmental and Flight Instrumentation

    Science.gov (United States)

    Alena, Richard; Figueroa, Fernando; Becker, Jeffrey; Foster, Mark; Wang, Ray; Gamudevelli, Suman; Studor, George

    2011-01-01

    Wireless sensor networks (WSN) based on the IEEE 802.15.4 Personal Area Network and ZigBee Pro 2007 standards are finding increasing use in home automation and smart energy markets providing a framework for interoperable software. The Wireless Connections in Space Project, funded by the NASA Engineering and Safety Center, is developing technology, metrics and requirements for next-generation spacecraft avionics incorporating wireless data transport. The team from Stennis Space Center and Mobitrum Corporation, working under a NASA SBIR grant, has developed techniques for embedding plug-and-play software into ZigBee WSN prototypes implementing the IEEE 1451 Transducer Electronic Datasheet (TEDS) standard. The TEDS provides meta-information regarding sensors such as serial number, calibration curve and operational status. Incorporation of TEDS into wireless sensors leads directly to building application level software that can recognize sensors at run-time, dynamically instantiating sensors as they are added or removed. The Ames Research Center team has been experimenting with this technology building demonstration prototypes for on-board health monitoring. Innovations in technology, software and process can lead to dramatic improvements for managing sensor systems applied to Developmental and Flight Instrumentation (DFI) aboard aerospace vehicles. A brief overview of the plug-and-play ZigBee WSN technology is presented along with specific targets for application within the aerospace DFI market. The software architecture for the sensor nodes incorporating the TEDS information is described along with the functions of the Network Capable Gateway processor which bridges 802.15.4 PAN to the TCP/IP network. Client application software connects to the Gateway and is used to display TEDS information and real-time sensor data values updated every few seconds, incorporating error detection and logging to help measure performance and reliability in relevant target environments

  12. A Wireless, Passive Sensor for Quantifying Packaged Food Quality

    Directory of Open Access Journals (Sweden)

    Keat Ghee Ong

    2007-09-01

    Full Text Available This paper describes the fabrication of a wireless, passive sensor based on aninductive-capacitive resonant circuit, and its application for in situ monitoring of thequality of dry, packaged food such as cereals, and fried and baked snacks. The sensor ismade of a planar inductor and capacitor printed on a paper substrate. To monitor foodquality, the sensor is embedded inside the food package by adhering it to the package’sinner wall; its response is remotely detected through a coil connected to a sensor reader. Asfood quality degrades due to increasing humidity inside the package, the paper substrateabsorbs water vapor, changing the capacitor’s capacitance and the sensor’s resonantfrequency. Therefore, the taste quality of the packaged food can be indirectly determined bymeasuring the change in the sensor’s resonant frequency. The novelty of this sensortechnology is its wireless and passive nature, which allows in situ determination of foodquality. In addition, the simple fabrication process and inexpensive sensor material ensure alow sensor cost, thus making this technology economically viable.

  13. Wireless Power Transfer Protocols in Sensor Networks: Experiments and Simulations

    Directory of Open Access Journals (Sweden)

    Sotiris Nikoletseas

    2017-04-01

    Full Text Available Rapid technological advances in the domain of Wireless Power Transfer pave the way for novel methods for power management in systems of wireless devices, and recent research works have already started considering algorithmic solutions for tackling emerging problems. In this paper, we investigate the problem of efficient and balanced Wireless Power Transfer in Wireless Sensor Networks. We employ wireless chargers that replenish the energy of network nodes. We propose two protocols that configure the activity of the chargers. One protocol performs wireless charging focused on the charging efficiency, while the other aims at proper balance of the chargers’ residual energy. We conduct detailed experiments using real devices and we validate the experimental results via larger scale simulations. We observe that, in both the experimental evaluation and the evaluation through detailed simulations, both protocols achieve their main goals. The Charging Oriented protocol achieves good charging efficiency throughout the experiment, while the Energy Balancing protocol achieves a uniform distribution of energy within the chargers.

  14. Performance analysis of wireless sensor networks in geophysical sensing applications

    Science.gov (United States)

    Uligere Narasimhamurthy, Adithya

    Performance is an important criteria to consider before switching from a wired network to a wireless sensing network. Performance is especially important in geophysical sensing where the quality of the sensing system is measured by the precision of the acquired signal. Can a wireless sensing network maintain the same reliability and quality metrics that a wired system provides? Our work focuses on evaluating the wireless GeoMote sensor motes that were developed by previous computer science graduate students at Mines. Specifically, we conducted a set of experiments, namely WalkAway and Linear Array experiments, to characterize the performance of the wireless motes. The motes were also equipped with the Sticking Heartbeat Aperture Resynchronization Protocol (SHARP), a time synchronization protocol developed by a previous computer science graduate student at Mines. This protocol should automatically synchronize the mote's internal clocks and reduce time synchronization errors. We also collected passive data to evaluate the response of GeoMotes to various frequency components associated with the seismic waves. With the data collected from these experiments, we evaluated the performance of the SHARP protocol and compared the performance of our GeoMote wireless system against the industry standard wired seismograph system (Geometric-Geode). Using arrival time analysis and seismic velocity calculations, we set out to answer the following question. Can our wireless sensing system (GeoMotes) perform similarly to a traditional wired system in a realistic scenario?

  15. Wideband E-Shaped Microstrip Antenna for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    G. Elangovan

    2012-01-01

    Full Text Available Problem statement: Wireless Sensor Networks (WSN is currently receiving significant attention due to their unlimited potential. However, it is still very early in the lifetime of such systems and many research challenges exist, out of which one of the challenges is sensor processing and fusion under limited capacities, the most important component in sensor is its TX/RX antenna. Approach: For high-speed wireless local area networks and other wireless communication systems covering the 5.33-5.71 GHz frequency band. In this frequency band microstrip antennas have attracted with its low-profile in nature. In this study, microstrip antenna is proposed to meet the challenges, which combines the advantages of compactness with the low cost and low profile of a patch antenna. Results: The key parameters governing the antenna optimization have been determined with the help of High Frequency Simulation Software (HFSS. As a consequence, 5.5GHz microstrip antenna with size 22×16×3.2 mm has been realized on duroid with 2.2. Conclusion: This combination of performance metrics is highly desirable for autonomous distributed sensor network applications where a small sensor node volume and excellent power efficiency are required.

  16. Power Aware Simulation Framework for Wireless Sensor Networks and Nodes

    Directory of Open Access Journals (Sweden)

    Glaser Johann

    2008-01-01

    Full Text Available Abstract The constrained resources of sensor nodes limit analytical techniques and cost-time factors limit test beds to study wireless sensor networks (WSNs. Consequently, simulation becomes an essential tool to evaluate such systems.We present the power aware wireless sensors (PAWiS simulation framework that supports design and simulation of wireless sensor networks and nodes. The framework emphasizes power consumption capturing and hence the identification of inefficiencies in various hardware and software modules of the systems. These modules include all layers of the communication system, the targeted class of application itself, the power supply and energy management, the central processing unit (CPU, and the sensor-actuator interface. The modular design makes it possible to simulate heterogeneous systems. PAWiS is an OMNeT++ based discrete event simulator written in C++. It captures the node internals (modules as well as the node surroundings (network, environment and provides specific features critical to WSNs like capturing power consumption at various levels of granularity, support for mobility, and environmental dynamics as well as the simulation of timing effects. A module library with standardized interfaces and a power analysis tool have been developed to support the design and analysis of simulation models. The performance of the PAWiS simulator is comparable with other simulation environments.

  17. Power Aware Simulation Framework for Wireless Sensor Networks and Nodes

    Directory of Open Access Journals (Sweden)

    Daniel Weber

    2008-07-01

    Full Text Available The constrained resources of sensor nodes limit analytical techniques and cost-time factors limit test beds to study wireless sensor networks (WSNs. Consequently, simulation becomes an essential tool to evaluate such systems.We present the power aware wireless sensors (PAWiS simulation framework that supports design and simulation of wireless sensor networks and nodes. The framework emphasizes power consumption capturing and hence the identification of inefficiencies in various hardware and software modules of the systems. These modules include all layers of the communication system, the targeted class of application itself, the power supply and energy management, the central processing unit (CPU, and the sensor-actuator interface. The modular design makes it possible to simulate heterogeneous systems. PAWiS is an OMNeT++ based discrete event simulator written in C++. It captures the node internals (modules as well as the node surroundings (network, environment and provides specific features critical to WSNs like capturing power consumption at various levels of granularity, support for mobility, and environmental dynamics as well as the simulation of timing effects. A module library with standardized interfaces and a power analysis tool have been developed to support the design and analysis of simulation models. The performance of the PAWiS simulator is comparable with other simulation environments.

  18. Distributed Global Function Model Finding for Wireless Sensor Network Data

    Directory of Open Access Journals (Sweden)

    Song Deng

    2016-01-01

    Full Text Available Function model finding has become an important tool for analysis of data collected from wireless sensor networks (WSNs. With the development of WSNs, a large number of sensors have been widely deployed so that the collected data show the characteristics of distribution and mass. For distributed and massive sensor data, traditional centralized function model finding algorithms would lead to a significant decrease in performance. To solve this problem, this paper proposes a distributed global function model finding algorithm for wireless sensor network data (DGFMF-WSND. In DGFMF-WSND, on the basis of gene expression programming (GEP, an adaptive population generation strategy based on sub-population associated evolution is applied to improve the convergence speed of GEP. Secondly, to solve the generation of global function model in distributed wireless sensor networks data, this paper provides a global model generation algorithm based on unconstrained nonlinear least squares. Four representative datasets are used to evaluate the performance of the proposed algorithm. The comparative results show that the improved GEP with adaptive population generation strategy outperforms all other algorithms on the average convergence speed, time-consumption, value of R-square, and prediction accuracy. Meanwhile, experimental results also show that DGFMF-WSND has a clear advantage in terms of time-consumption and error of fitting. Moreover, with increasing of dataset size, DGFMF-WSND also demonstrates good speed-up ratio and scale-up ratio.

  19. Analytical Approach for Performance of Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Prof. Satish K Shah

    2012-06-01

    Full Text Available Wireless Sensor Networks (WSN have been noticed and researched in recent years. WSNs have inherent and unique characteristics compared with traditional networks. It consists of light-weight, low power and small size sensor nodes (SNs. They have ability to monitor, calculate and communicate wirelessly. Sensor nodes should send their collected data to a determined node called Sink. The sink processes data and performs appropriate actions. Nodes using routing protocol determine a path for sending data to sink. Sensor nodes have a limited transmission range, and their processing and storage capabilities as well as their energy resources are also limited. Routing protocols for wireless sensor networks have to ensure reliable multi-hop communication under these conditions. In this paper, we provide an accurate simulation model with respect to the specifications of IEEE 802.15.4 standard. We simulated and analyzed two different scenarios, where we examined the topological features and performance of the IEEE 802.15.4 standard using OPNET simulator. We compared the two possible topologies (Mesh and Tree to each other. The comparative results have been reported for the performance metrics like: Number of hopes, End to End Delay and Load of network.

  20. Secure MAC for Wireless Sensor Networks through RBFNN

    Directory of Open Access Journals (Sweden)

    P.Sankara Rao

    2010-08-01

    Full Text Available This paper discusses an application of a neural network in wireless sensor network security. It presents a Radial Basic Function Neural Network based media access control protocol (MAC to secure a CSMA-based wireless sensor network against the denial-of-service attacks launched by adversaries. The Radial Basic Function Neural Network enhances the security of a WSN by constantly monitoring the parameters that exhibit unusual variations in case of an attack. The RBFN shuts down the MAC layer and the physical layer of the sensor node when the suspicion factor, the output of the MLP, exceeds a preset threshold level. The MLP-guarded secure WSN is implemented using the Prowler simulator. Simulation results show that the MLP helps in extending the lifetime of the WSN.

  1. Failure impact on coverage in linear wireless sensor networks

    DEFF Research Database (Denmark)

    Mohamed, Nader; Al-Jaroodi, Jameela; Jawhar, Imad

    2013-01-01

    Wireless Sensor networks (WSN) are used to monitor long linear structures such as pipelines, rivers, railroads, international borders, and high power transmission cables. In this case a special type of WSN called linear wireless sensor network (LSN) is used. One of the main challenges of using LSN...... between holes may not be able to deliver their sensed information, which negatively affects network's sensing coverage. In this paper, we provide analysis of the different types of node faults in LSN and study their negative impact on the sensing coverage. We develop an analytical model to estimate...... is the reliability of the connections across the nodes. Faults in a few contiguous nodes may cause the creation of holes (segments where nodes on either end of them cannot reach each other), which will result in dividing the network into multiple disconnected segments. As a result, sensor nodes that are located...

  2. Signal processing techniques for synchronization of wireless sensor networks

    Science.gov (United States)

    Lee, Jaehan; Wu, Yik-Chung; Chaudhari, Qasim; Qaraqe, Khalid; Serpedin, Erchin

    2010-11-01

    Clock synchronization is a critical component in wireless sensor networks, as it provides a common time frame to different nodes. It supports functions such as fusing voice and video data from different sensor nodes, time-based channel sharing, and sleep wake-up scheduling, etc. Early studies on clock synchronization for wireless sensor networks mainly focus on protocol design. However, clock synchronization problem is inherently related to parameter estimation, and recently, studies of clock synchronization from the signal processing viewpoint started to emerge. In this article, a survey of latest advances on clock synchronization is provided by adopting a signal processing viewpoint. We demonstrate that many existing and intuitive clock synchronization protocols can be interpreted by common statistical signal processing methods. Furthermore, the use of advanced signal processing techniques for deriving optimal clock synchronization algorithms under challenging scenarios will be illustrated.

  3. Investigation of Wireless Sensor Networks for Structural Health Monitoring

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-01-01

    Full Text Available Wireless sensor networks (WSNs are one of the most able technologies in the structural health monitoring (SHM field. Through intelligent, self-organising means, the contents of this paper will test a variety of different objects and different working principles of sensor nodes connected into a network and integrated with data processing functions. In this paper the key issues of WSN applied in SHM are discussed, including the integration of different types of sensors with different operational modalities, sampling frequencies, issues of transmission bandwidth, real-time ability, and wireless transmitter frequency. Furthermore, the topology, data fusion, integration, energy saving, and self-powering nature of different systems will be investigated. In the FP7 project “Health Monitoring of Offshore Wind Farms,” the above issues are explored.

  4. Optimistic Opportunistic Routing Techniques for Wireless Sensor Networks: -A Review

    Directory of Open Access Journals (Sweden)

    M.P. Anuradha

    2013-07-01

    Full Text Available Secure and optimistic routing is very important and significant task in Wireless Sensor Networks (WSN. In multi-hop communication, selection of routing path between the sensor nodes in the sensor field is essential and also important. Based on the coordination, time based, token based and network coding based techniques the data packets are forwarded from the source to the destination through the intermediate nodes in the network called Opportunistic Routing (OR. Compared with traditional routing, the OR uses the broadcast nature of transmission which greatly increases the wireless network throughput, reliability. In order to support higher node density in WSN, the selection of the most optimistic, flexible, dynamic and reliable OR mechanism and OR protocol are important. In this study the various OR mechanisms and OR protocol are identified and design issues like delivery ratio, packet transmission rate, communication pattern, reliability rate, throughput and fault tolerance are discussed and the comparative results are also tabulated.

  5. DESIGN OF PROTOCOL IN UNDERWATER WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    S. Fathima

    2015-10-01

    Full Text Available In this work we designed a routing protocol to overcome upcoming challenges in under water wireless sensor networks. The routing protocol designed for specific roles leads to issues in the network. The major issues for development of routing protocol for underwater sensor network are harsh deployment environment, low bandwidth, high propagation delay, low bandwidth, requires high bandwidth energy, temporary losses, fouling and corrosion and high bit error rates. In this project the certain issues to be rectified are low bandwidth, energy efficiency and data delivery. The limitations existing routing protocols are low data delivery, data delivery ratio, energy efficiency, bandwidth efficiency and reliability. Design of three new protocol is to overcome the limitations of existing protocols in underwater wireless sensor networks.

  6. A Wireless and Passive Low-Pressure Sensor

    Directory of Open Access Journals (Sweden)

    Pascal Nicolay

    2014-02-01

    Full Text Available This paper will discuss the results obtained with a first prototype of a completely passive and wireless low pressure sensor. The device is a heat conductivity gauge, based on a wireless and passive SAW temperature sensor. The required heating energy is applied to the sensor using inductive coupling. The prototype was successfully tested in a vacuum chamber. Its equilibrium temperature changed drastically and in a reproducible way when pressure steps were applied. However, the response time was very long. A model is provided to account for the sensor’s behavior. It is then used to show that the response time could be strongly improved using basic design improvements. Further possible improvements are discussed.

  7. Wireless Distribution and Use of Bio-sensor Data

    DEFF Research Database (Denmark)

    Kyng, Morten; Kristensen, Margit; Christensen, Erika Frischknecht

    2007-01-01

      During emergency response use of wired bio-sensors create problems for the response workers. It is difficult to transport patients and checking of data requires you to be next to the patient. We will report on work in progress regarding development of a wireless bio-monitor system that supports...... distribution and use by all involved parties of bio-sensor data during emergency response. The system is being developed in close cooperation between doctors, paramedics and IT specialists using qualitative methods including ethnographically inspired field work and simulations of future work. The system...... consists of small bio-monitors - with sensors and a unique ID - which are placed on the victims. The bio-monitors communicate wirelessly with one or more base-stations, which distribute the signals locally at the incident site and to remote coordination centres and emergency departments. Ongoing...

  8. Critical Infrastructure Surveillance Using SecureWireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Michael Niedermeier

    2015-11-01

    Full Text Available In this work, a secure wireless sensor network (WSN for the surveillance, monitoring and protection of critical infrastructures was developed. To guarantee the security of the system, the main focus was the implementation of a unique security concept, which includes both security on the communication level, as well as mechanisms that ensure the functional safety during its operation. While there are many theoretical approaches in various subdomains of WSNs—like network structures, communication protocols and security concepts—the construction, implementation and real-life application of these devices is still rare. This work deals with these aforementioned aspects, including all phases from concept-generation to operation of a secure wireless sensor network. While the key focus of this paper lies on the security and safety features of the WSN, the detection, localization and classification capabilities resulting from the interaction of the nodes’ different sensor types are also described.

  9. Low-Power Wireless Sensor Networks Protocols, Services and Applications

    CERN Document Server

    Suhonen, Jukka; Kaseva, Ville; Hämäläinen, Timo D; Hännikäinen, Marko

    2012-01-01

    Wireless sensor network (WSN) is an ad-hoc network technology comprising even thousands of autonomic and self-organizing nodes that combine environmental sensing, data processing, and wireless networking. The applications for sensor networks range from home and industrial environments to military uses. Unlike the traditional computer networks, a WSN is application-oriented and deployed for a specific task. WSNs are data centric, which means that messages are not send to individual nodes but to geographical locations or regions based on the data content. A WSN node is typically battery powered and characterized by extremely small size and low cost. As a result, the processing power, memory, and energy resources of an individual sensor node are limited. However, the feasibility of a WSN lies on the collaboration between the nodes. A reference WSN node comprises a Micro-Controller Unit (MCU) having few Million Instructions Per Second (MIPS) processing speed, tens of kilobytes program memory, few kilobytes data m...

  10. Wireless Distribution and Use of Bio-sensor Data

    DEFF Research Database (Denmark)

    Kyng, Morten; Kristensen, Margit; Christensen, Erika Frischknecht

    2007-01-01

    distribution and use by all involved parties of bio-sensor data during emergency response. The system is being developed in close cooperation between doctors, paramedics and IT specialists using qualitative methods including ethnographically inspired field work and simulations of future work. The system...... consists of small bio-monitors - with sensors and a unique ID - which are placed on the victims. The bio-monitors communicate wirelessly with one or more base-stations, which distribute the signals locally at the incident site and to remote coordination centres and emergency departments. Ongoing......  During emergency response use of wired bio-sensors create problems for the response workers. It is difficult to transport patients and checking of data requires you to be next to the patient. We will report on work in progress regarding development of a wireless bio-monitor system that supports...

  11. A Comparison of Link Layer Attacks on Wireless Sensor Networks

    CERN Document Server

    Mohammadi, Shahriar; 10.5121/jgraphhoc.2011.3103

    2011-01-01

    Wireless sensor networks (WSNs) have many potential applications [1, 5] and unique challenges. They usually consist of hundreds or thousands small sensor nodes such as MICA2, which operate autonomously; conditions such as cost, invisible deployment and many application domains, lead to small size and limited resources sensors [2]. WSNs are susceptible to many types of link layer attacks [1] and most of traditional networks security techniques are unusable on WSNs [2]; due to wireless and shared nature of communication channel, untrusted transmissions, deployment in open environments, unattended nature and limited resources [1]. So, security is a vital requirement for these networks; but we have to design a proper security mechanism that attends to WSN's constraints and requirements. In this paper, we focus on security of WSNs, divide it (the WSNs security) into four categories and will consider them, include: an overview of WSNs, security in WSNs, the threat model on WSNs, a wide variety of WSNs' link layer a...

  12. Distributed Detection of Wormhole Attacks in Wireless Sensor Networks

    Science.gov (United States)

    de Graaf, Rennie; Hegazy, Islam; Horton, Jeffrey; Safavi-Naini, Reihaneh

    Sensors in a wireless sensor network depend on their neighbours to route their messages. Yet, routing protocols in wireless sensor network are vulnerable to different types of attacks. In this paper, we consider the wormhole attack in which the adversary diverts traffic from one part of the network to another part by introducing a low cost tunnel between the two parts. We introduce a distributed intrusion detection system that monitors the communication in the network and propose a criterion for the placement of intrusion detection nodes. The intrusion detection system searches for violations of that criterion to detect wormholes of length above a certain minimum value. We evaluate the effectiveness of our system in a simulated environment. The experiments show that our system can detect 100% of the wormholes that are beyond the communication range of the intrusion detection nodes. Finally, we discuss our results and show directions for future work.

  13. Failure impact on coverage in linear wireless sensor networks

    DEFF Research Database (Denmark)

    Mohamed, Nader; Al-Jaroodi, Jameela; Jawhar, Imad

    2013-01-01

    Wireless Sensor networks (WSN) are used to monitor long linear structures such as pipelines, rivers, railroads, international borders, and high power transmission cables. In this case a special type of WSN called linear wireless sensor network (LSN) is used. One of the main challenges of using LSN...... is the reliability of the connections across the nodes. Faults in a few contiguous nodes may cause the creation of holes (segments where nodes on either end of them cannot reach each other), which will result in dividing the network into multiple disconnected segments. As a result, sensor nodes that are located...... between holes may not be able to deliver their sensed information, which negatively affects network's sensing coverage. In this paper, we provide analysis of the different types of node faults in LSN and study their negative impact on the sensing coverage. We develop an analytical model to estimate...

  14. Harvesting Ambient Environmental Energy for Wireless Sensor Networks: A Survey

    Directory of Open Access Journals (Sweden)

    Gongbo Zhou

    2014-01-01

    Full Text Available In recent years, wireless sensor networks (WSNs have grown dramatically and made a great progress in many applications. But having limited life, batteries, as the power sources of wireless sensor nodes, have restricted the development and application of WSNs which often requires a very long lifespan for better performance. In order to make the WSNs prevalent in our lives, an alternative energy source is required. Environmental energy is an attractive power source, and it provides an approach to make the sensor nodes self-powered with the possibility of an almost infinite lifetime. The goal of this survey is to present a comprehensive review of the recent literature on the various possible energy harvesting technologies from ambient environment for WSNs.

  15. Energy Efficient Distributed Fault Identification Algorithm in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Meenakshi Panda

    2014-01-01

    Full Text Available A distributed fault identification algorithm is proposed here to find both hard and soft faulty sensor nodes present in wireless sensor networks. The algorithm is distributed, self-detectable, and can detect the most common byzantine faults such as stuck at zero, stuck at one, and random data. In the proposed approach, each sensor node gathered the observed data from the neighbors and computed the mean to check whether faulty sensor node is present or not. If a node found the presence of faulty sensor node, then compares observed data with the data of the neighbors and predict probable fault status. The final fault status is determined by diffusing the fault information from the neighbors. The accuracy and completeness of the algorithm are verified with the help of statistical model of the sensors data. The performance is evaluated in terms of detection accuracy, false alarm rate, detection latency and message complexity.

  16. Sleep Deprivation Attack Detection in Wireless Sensor Network

    CERN Document Server

    Bhattasali, Tapalina; Sanyal, Sugata; 10.5120/5056-7374 10.5120/5056-7374 10.5120/5056-7374 10.5120/5056-7374

    2012-01-01

    Deployment of sensor network in hostile environment makes it mainly vulnerable to battery drainage attacks because it is impossible to recharge or replace the battery power of sensor nodes. Among different types of security threats, low power sensor nodes are immensely affected by the attacks which cause random drainage of the energy level of sensors, leading to death of the nodes. The most dangerous type of attack in this category is sleep deprivation, where target of the intruder is to maximize the power consumption of sensor nodes, so that their lifetime is minimized. Most of the existing works on sleep deprivation attack detection involve a lot of overhead, leading to poor throughput. The need of the day is to design a model for detecting intrusions accurately in an energy efficient manner. This paper proposes a hierarchical framework based on distributed collaborative mechanism for detecting sleep deprivation torture in wireless sensor network efficiently. Proposed model uses anomaly detection technique ...

  17. COLLABORATIVE TRACKING VIA PARTICLE FILTER IN WIRELESS SENSOR NETWORKS

    Institute of Scientific and Technical Information of China (English)

    Yan Zhenya; Zheng Baoyu; Xu Li; Li Shitang

    2008-01-01

    Target tracking is one of the main applications of wireless sensor networks. Optimized computation and energy dissipation are critical requirements to save the limited resource of the sensor nodes. A framework and analysis for collaborative tracking via particle filter are presented in this paper.Collaborative tracking is implemented through sensor selection, and results of tracking are propagated among sensor nodes. In order to save communication resources, a new Ganssian sum particle filter,called Gaussian sum quasi particle filter, to perform the target tracking is presented, in which only mean and covariance of mixands need to be communicated. Based on the Gaussian sum quasi particle filter, a sensor selection criterion is proposed, which is computationally much simpler than other sensor selection criterions. Simulation results show that the proposed method works well for target tracking.

  18. Observing the Unobservable - Distributed Online Outlier Detection in Wireless Sensor Networks

    NARCIS (Netherlands)

    Zhang, Y.

    2010-01-01

    The generation of wireless sensor networks (WSNs) makes human beings observe and reason about the physical environment better, easier, and faster. The wireless sensor nodes equipped with sensing, processing, wireless communication and actuation capabilities can be densely deployed in a wide

  19. Observing the Unobservable - Distributed Online Outlier Detection in Wireless Sensor Networks

    NARCIS (Netherlands)

    Zhang, Y.

    2010-01-01

    The generation of wireless sensor networks (WSNs) makes human beings observe and reason about the physical environment better, easier, and faster. The wireless sensor nodes equipped with sensing, processing, wireless communication and actuation capabilities can be densely deployed in a wide geograph

  20. Clustering Algorithms for Heterogeneous Wireless Sensor Networks - A Brief Survey

    Directory of Open Access Journals (Sweden)

    A.MeenaKowshalya

    2011-09-01

    Full Text Available Wireless sensor networks (WSN are emerging in vari ous fields like disaster management, battle field surveillance and border security surveillance. A la rge number of sensors in these applications are unattended and work autonomously. Clustering is a k ey technique to improve the network lifetime, reduc e the energy consumption and increase the scalability of the sensor network. In this paper, we study the impact of heterogeneity of the nodes to the perform ance of WSN. This paper surveys the different clust ering algorithm for heterogeneous WSN .

  1. Distributed estimation based on observations prediction in wireless sensor networks

    KAUST Repository

    Bouchoucha, Taha

    2015-03-19

    We consider wireless sensor networks (WSNs) used for distributed estimation of unknown parameters. Due to the limited bandwidth, sensor nodes quantize their noisy observations before transmission to a fusion center (FC) for the estimation process. In this letter, the correlation between observations is exploited to reduce the mean-square error (MSE) of the distributed estimation. Specifically, sensor nodes generate local predictions of their observations and then transmit the quantized prediction errors (innovations) to the FC rather than the quantized observations. The analytic and numerical results show that transmitting the innovations rather than the observations mitigates the effect of quantization noise and hence reduces the MSE. © 2015 IEEE.

  2. NEAR OPTIMAL CLUSTER-HEAD SELECTION FOR WIRELESS SENSOR NETWORKS

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Clustering in wireless sensor networks is an effective way to save energy and reuse bandwidth. To our best knowledge, most of the clustering protocols proposed in literature are of a dynamic type, where cluster heads are selected in each period, followed by cluster formation. In this paper, a new static type clustering method called Hausdorff clustering, which is based on the location of sensor nodes as well as communication efficiency and network connectivity, is proposed. The cluster head, however,is rotated within the cluster by a fuzzy logic algorithm that optimizes the network lifetime. Simulation results show that this approach can significantly increase the lifetime of the sensor network.

  3. Link-Quality Measurement and Reporting in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Byoungjo Choi

    2013-03-01

    Full Text Available Wireless Sensor networks (WSNs are created by small hardware devices that possess the necessary functionalities to measure and exchange a variety of environmental data in their deployment setting. In this paper, we discuss the experiments in deploying a testbed as a first step towards creating a fully functional heterogeneous wireless network-based underground monitoring system. The system is mainly composed of mobile and static ZigBee nodes, which are deployed on the underground mine galleries for measuring ambient temperature. In addition, we describe the measured results of link characteristics such as received signal strength, latency and throughput for different scenarios.

  4. ENHANCEMENT OF TRANSMISSION RANGE ASSIGNMENT FOR CLUSTERED WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    M. Salamah

    2016-03-01

    Full Text Available Transmitter range assignment in clustered wireless networks is the bottleneck of the balance between energy conservation and the connectivity to deliver data to the sink or gateway node. The aim of this research is to optimize the energy consumption through reducing the transmission ranges of the nodes, while maintaining high probability to have end-to-end connectivity to the network’s data sink. We modified the approach given in [1] to achieve more than 25% power saving through reducing cluster head (CH transmission range of the backbone nodes in a multihop wireless sensor network with ensuring at least 95% end-to-end connectivity probability.

  5. An Air-Ground Wireless Sensor Network for Crop Monitoring

    Directory of Open Access Journals (Sweden)

    Claudio Rossi

    2011-06-01

    Full Text Available This paper presents a collaborative system made up of a Wireless Sensor Network (WSN and an aerial robot, which is applied to real-time frost monitoring in vineyards. The core feature of our system is a dynamic mobile node carried by an aerial robot, which ensures communication between sparse clusters located at fragmented parcels and a base station. This system overcomes some limitations of the wireless networks in areas with such characteristics. The use of a dedicated communication channel enables data routing to/from unlimited distances.

  6. Battery-free Wireless Sensor Network For Advanced Fossil-Fuel Based Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    Yi Jia

    2011-02-28

    This report summarizes technical progress achieved during the project supported by the Department of Energy under Award Number DE-FG26-07NT4306. The aim of the project was to conduct basic research into battery-free wireless sensing mechanism in order to develop novel wireless sensors and sensor network for physical and chemical parameter monitoring in a harsh environment. Passive wireless sensing platform and five wireless sensors including temperature sensor, pressure sensor, humidity sensor, crack sensor and networked sensors developed and demonstrated in our laboratory setup have achieved the objective for the monitoring of various physical and chemical parameters in a harsh environment through remote power and wireless sensor communication, which is critical to intelligent control of advanced power generation system. This report is organized by the sensors developed as detailed in each progress report.

  7. Wireless Sensing System Using Open-circuit, Electrically-conductive Spiral-trace Sensor

    Science.gov (United States)

    Woodard, Stanley E. (Inventor); Taylor, Bryant D. (Inventor)

    2013-01-01

    A wireless sensing system includes a sensor made from an electrical conductor shaped to form an open-circuit, electrically-conductive spiral trace having inductance and capacitance. In the presence of a time-varying magnetic field, the sensor resonates to generate a harmonic response having a frequency, amplitude and bandwidth. A magnetic field response recorder wirelessly transmits the time-varying magnetic field to the sensor and wirelessly detects the sensor's response frequency, amplitude and bandwidth.

  8. Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

    NARCIS (Netherlands)

    Rentrop, C.; Rubingh, J.E.J.M.; Lelieveld, R.; Sandberg, H.

    2014-01-01

    The ROPAS project (Roll-to-roll paper sensors) combines high end electronics and wireless sensors with low cost paper substrates and processing techniques that can be applied on a large scale. Paper is the next step in the printed electronics roadmap of utilising cheaper substrate materials as a rep

  9. Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

    NARCIS (Netherlands)

    Rentrop, C.; Rubingh, J.E.J.M.; Lelieveld, R.; Sandberg, H.

    2014-01-01

    The ROPAS project (Roll-to-roll paper sensors) combines high end electronics and wireless sensors with low cost paper substrates and processing techniques that can be applied on a large scale. Paper is the next step in the printed electronics roadmap of utilising cheaper substrate materials as a

  10. Sensor fault detection and isolation over wireless sensor network based on hardware redundancy

    Science.gov (United States)

    Hao, Jingjing; Kinnaert, Michel

    2017-01-01

    In order to diagnose sensor faults with small magnitude in wireless sensor networks, distinguishability measures are defined to indicate the performance for fault detection and isolation (FDI) at each node. A systematic method is then proposed to determine the information to be exchanged between nodes to achieve FDI specifications while limiting the computation complexity and communication cost.

  11. Wireless SAW Based Temperature Gradient Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Prime Photonics proposes design and development of a surface acoustic wave (SAW) based temperature gradient sensor for instrumentation of thermal protection systems...

  12. Performance Evaluation of Dynamic and Static Sensor Node in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Payal T Mahida

    2013-02-01

    Full Text Available A wireless sensor network (WSN consists of spatially distributed autonomous sensors to monitor physical or environmental conditions, such as temperature, sound, pressure, etc. and to cooperatively pass their data through the network to a main location. The main goal of this paper is to analysis and Evaluation of AODV routing protocol for wireless sensor network and compares the Static and Dynamic Scenarios for PDR, e2e Delay and throughput. The goal of this work is to perform a simulation with different metrics, analysis of the results and deriving a conclusion on basis of performance evaluation.

  13. Data Dissemination in Wireless Sensor Networks with Network Coding

    Directory of Open Access Journals (Sweden)

    Xiumin Wang

    2010-01-01

    Full Text Available In wireless sensor networks (WSNs, it is often necessary to update the software running on sensors, which requires reliable dissemination of large data objects to each sensor with energy efficiency. During data dissemination, due to sleep scheduling designed for energy efficiency, some sensors may not receive some packets at some time slots. In the meantime, due to the unreliability of wireless communication, a sensor may not successfully receive a packet even when it is in the active mode. Thus, retransmission of such packets to those sensors is necessary, which consumes more energy and increases the delay of data dissemination cycle. In this paper, we propose a network coding-based approach in data dissemination such that data dissemination can be accomplished at the earliest time. Thus, less energy is consumed and the delay can be decreased. The impact of packet loss probability and the sleep probability of sensors on the network coding gain is analyzed. A threshold is also given to decide whether the current sleep scheduling is effective on energy saving in data dissemination process or not. Simulation results demonstrate the effectiveness and scalability of the proposed work.

  14. Scalable and Hybrid Radio Resource Management for Future Wireless Networks

    DEFF Research Database (Denmark)

    Mino, E.; Luo, Jijun; Tragos, E.;

    2007-01-01

    The concept of ubiquitous and scalable system is applied in the IST WINNER II [1] project to deliver optimum performance for different deployment scenarios, from local area to wide area wireless networks. The integration in a unique radio system of a cellular and local area type networks supposes...... describes a proposal for scalable and hybrid radio resource management to efficiently integrate the different WINNER system modes. Index...

  15. Wireless sensor systems and methods, and methods of monitoring structures

    Science.gov (United States)

    Kunerth, Dennis C.; Svoboda, John M.; Johnson, James T.; Harding, L. Dean; Klingler, Kerry M.

    2007-02-20

    A wireless sensor system includes a passive sensor apparatus configured to be embedded within a concrete structure to monitor infiltration of contaminants into the structure. The sensor apparatus includes charging circuitry and a plurality of sensors respectively configured to measure environmental parameters of the structure which include information related to the infiltration of contaminants into the structure. A reader apparatus is communicatively coupled to the sensor apparatus, the reader apparatus being configured to provide power to the charging circuitry during measurements of the environmental parameters by the sensors. The reader apparatus is configured to independently interrogate individual ones of the sensors to obtain information measured by the individual sensors. The reader apparatus is configured to generate an induction field to energize the sensor apparatus. Information measured by the sensor apparatus is transmitted to the reader apparatus via a response signal that is superimposed on a return induction field generated by the sensor apparatus. Methods of monitoring structural integrity of the structure are also provided.

  16. Wireless sensor networks in a maritime environment.

    NARCIS (Netherlands)

    Kavelaars, W.; Maris, M.

    2005-01-01

    In the recent years, there has been a lot of research on sensor networks-and their applications. In particular for monitoring large and potentially hostile areas these networks have proven to be very useful. The technique of land-based sensor networks can be extrapolated to sensing buoys at sea or i

  17. Development of a wireless bridge monitoring system for condition assessment using hybrid techniques

    Science.gov (United States)

    Whelan, Matthew J.; Fuchs, Michael P.; Gangone, Michael V.; Janoyan, Kerop D.

    2007-04-01

    The introduction and development of wireless sensor network technology has resulted in rapid growth within the field of structural health monitoring (SHM), as the dramatic cable costs associated with instrumentation of large civil structures is potentially alleviated. Traditionally, condition assessment of bridge structures is accomplished through the use of either vibration measurements or strain sensing. One approach is through quantifying dynamic characteristics and mode shapes developed through the use of relatively dense arrays of accelerometers. Another widely utilized method of condition assessment is bridge load rating, which is enabled through the use of strain sensors. The Wireless Sensor Solution (WSS) developed specifically for diagnostic bridge monitoring provides a hybrid system that interfaces with both accelerometers and strain sensors to facilitate vibration-based bridge evaluation as well as load rating and static analysis on a universal platform. This paper presents the development and testing of a wireless bridge monitoring system designed within the Laboratory for Intelligent Infrastructure and Transportation Technologies (LIITT) at Clarkson University. The system interfaces with low-cost MEMS accelerometers using custom signal conditioning for amplification and filtering tailored to the spectrum of typical bridge vibrations, specifically from ambient excitation. Additionally, a signal conditioning and high resolution ADC interface is provided for strain gauge sensors. To permit compensation for the influence of temperature, thermistor-based temperature sensing is also enabled. In addition to the hardware description, this paper presents features of the software applications and host interface developed for flexible, user-friendly in-network control of and acquisition from the sensor nodes. The architecture of the software radio protocol is also discussed along with results of field deployments including relatively large-scale networks and

  18. Wirelessly Interrogated Position or Displacement Sensors

    Science.gov (United States)

    Woodard, Stanley E.; Taylor, Bryant D.

    2007-01-01

    Two simple position or displacement sensors based on inductance-capacitance resonant circuits have been conceived. These sensors are both powered and interrogated without use of wires and without making contact with other objects. Instead, excitation and interrogation are accomplished by means of a magnetic-field-response recorder. Both of the present position or displacement sensors consist essentially of variable rectangular parallel-plate capacitors electrically connected in series with fixed inductors. Simple inductance-capacitance circuits of the type used in these sensors are inherently robust; their basic mode of operation does not depend on maintenance of specific environmental conditions. Hence, these sensors can be used under such harsh conditions as cryogenic temperatures, high pressures, and radioactivity.

  19. Performance Evaluation of Zigbee Transceiver for Wireless Body Sensor System

    Directory of Open Access Journals (Sweden)

    Ruchita Pandey

    2014-06-01

    Full Text Available A cost effective impedance measurement system and a low costtransceiver device has been presented for wireless body sensor systems.The proposed device has an analog front end to measure bioimpedance and ZigBee device which provides reliable wireless communication.Bioelectric Impedance measurement enables to characterize the state of tissues.Tetrapolar method is an advance method for measuring impedance since it is a very easy and simple method for practical implementation.The principle of modified tetrapolar method and its wireless transimission through zigbee has been investigated here.Different modulation technique has been applied and it has been found that MSK based transceiver is an efficient one since it has low bit error rate and it produce constant envelope carrier signals which have no amplitude and phase varations,hence it will be a more power saving technique.

  20. Lifting Scheme DWT Implementation in a Wireless Vision Sensor Network

    Science.gov (United States)

    Ong, Jia Jan; Ang, L.-M.; Seng, K. P.

    This paper presents the practical implementation of a Wireless Visual Sensor Network (WVSN) with DWT processing on the visual nodes. WVSN consists of visual nodes that capture video and transmit to the base-station without processing. Limitation of network bandwidth restrains the implementation of real time video streaming from remote visual nodes through wireless communication. Three layers of DWT filters are implemented to process the captured image from the camera. With having all the wavelet coefficients produced, it is possible just to transmit the low frequency band coefficients and obtain an approximate image at the base-station. This will reduce the amount of power required in transmission. When necessary, transmitting all the wavelet coefficients will produce the full detail of image, which is similar to the image captured at the visual nodes. The visual node combines the CMOS camera, Xilinx Spartan-3L FPGA and wireless ZigBee® network that uses the Ember EM250 chip.