WorldWideScience

Sample records for hybrid spread-spectrum modulation

  1. Hybrid spread spectrum radio system

    Science.gov (United States)

    Smith, Stephen F [London, TN; Dress, William B [Camas, WA

    2010-02-09

    Systems and methods are described for hybrid spread spectrum radio systems. A method, includes receiving a hybrid spread spectrum signal including: fast frequency hopping demodulating and direct sequence demodulating a direct sequence spread spectrum signal, wherein multiple frequency hops occur within a single data-bit time and each bit is represented by chip transmissions at multiple frequencies.

  2. Fundamentals of spread spectrum modulation

    CERN Document Server

    Ziemer, Rodger E

    2007-01-01

    This lecture covers the fundamentals of spread spectrum modulation, which can be defined as any modulation technique that requires a transmission bandwidth much greater than the modulating signal bandwidth, independently of the bandwidth of the modulating signal. After reviewing basic digital modulation techniques, the principal forms of spread spectrum modulation are described. One of the most important components of a spread spectrum system is the spreading code, and several types and their characteristics are described. The most essential operation required at the receiver in a spread spect

  3. Spread Spectrum Communication with Chaotic Frequency Modulation

    Science.gov (United States)

    Volkovskii, Alexander R.; Tsimring, Lev S.; Rulkov, Nikolai F.; Langmore, Ian; Young, Stephen C.

    We describe two different approaches to employ chaotic signals in spread-spectrum (SS) communication systems with phase and frequency modulation. In the first one a chaotic signal is used as a carrier. We demonstrate that using a feedback loop controller, the local chaotic oscillator in the receiver can be synchronized to the transmitter. The information can be transmitted using phase or frequency modulation of the chaotic carrier signal. In the second system the chaotic signal is used for frequency modulation of a voltage controlled oscillator (VCO) to provide a SS signal similar to frequency hopping systems. We show that in a certain parameter range the receiver VCO can be synchronized to the transmitter VCO using a relatively simple phase lock loop (PLL) circuit. The same PLL is used for synchronization of the chaotic oscillators. The information signal can be transmitted using a binary phase shift key (BPSK) or frequency shift key (BFSK) modulation of the frequency modulated carrier signal. Using an experimental circuit operating at radio frequency band and a computer modeling we study the bit error rate (BER) performance in a noisy channel as well as multiuser capability of the system.

  4. High efficiency spreading spectrum modulation using double orthogonal complex sequences

    Institute of Scientific and Technical Information of China (English)

    Shi Xiaohong

    2012-01-01

    This paper presents a novel scheme of high efficiency spreading spectrum modulation using double orthogonal complex sequences (DoCS). In this scheme, input data bit-stream is split into many groups with length M. Each group is then mapped into a word of width M and then utihzed to select one sequence from 2u-2 DoCS sequences each with length L. After that, the selected sequence is modulated on carrier in quadrature phase shift keying (QPSK) mode. In addition, a new method named forward phase correction (FPC) is put forward for carrier recovery. Theoretical analysis and bit-error-ratio(BER) experiment results indicate that the proposed scheme has better performance than the conventional direct sequence spread spectrum(DSSS) scheme both in bandwidth efficiency and processing gain of the receiver.

  5. Spread spectrum communication system with chaotic frequency modulation

    Science.gov (United States)

    Volkovskii, A. R.; Tsimring, L. Sh.; Rulkov, N. F.; Langmore, I.

    2005-09-01

    A new spread spectrum communication system utilizing chaotic frequency modulation of sinusoidal signals is discussed. A single phase lock loop (PLL) system in the receiver is used both to synchronize the local chaotic oscillator and to recover the information signal. We study the dynamics of the synchronization process, stability of the PLL system, and evaluate the bit-error-rate performance of this chaos-based communication system.

  6. Design, Implementation, and Evaluation of a Hybrid DS/FFH Spread-Spectrum Radio Transceiver

    Energy Technology Data Exchange (ETDEWEB)

    Olama, Mohammed M [ORNL; Killough, Stephen M [ORNL; Kuruganti, Teja [ORNL; Carroll, Thomas E. [Pacific Northwest National Laboratory (PNNL)

    2014-01-01

    In recent years there has been great interest in using hybrid spread-spectrum (HSS) techniques for commercial applications, particularly in the Smart Grid, in addition to their inherent uses in military communications. This is because HSS can accommodate high data rates with high link integrity, even in the presence of significant multipath effects and interfering signals. A highly useful form of this transmission technique for many types of command, control, and sensing applications is the specific code-related combination of standard direct-sequence modulation with "fast" frequency-hopping, denoted hybrid DS/FFH, wherein multiple frequency hops occur within a single data-bit time. In this paper, we present the efforts carried out at Oak Ridge National Laboratory toward exploring the design, implementation, and evaluation of a hybrid DS/FFH spread-spectrum radio transceiver using a single Field Programmable Gate Array (FPGA). The FPGA allows the various subsystems to quickly communicate with each other and thereby maintain tight synchronization. We also investigate various hopping sequences against robustness to interference and jamming. Experimental results are presented that show the receiver sensitivity, radio data-rate/bit-error evaluations, and jamming and interference rejection capabilities of the implemented hybrid DS/FFH spread-spectrum system under widely varying design parameters.

  7. 时域反相对称与扩频技术的混合技术研究%Hybrid Technology of Time Domain Phase Inversion Symmetric Modulation and Spread Spectrum System

    Institute of Scientific and Technical Information of China (English)

    薛青娜; 校江超

    2011-01-01

    In order to achieve the phase-inversion symmetric and spread spectrum communication, according to the relativity of noise in time domain and the anti-noise theory of time domain phase-inversions hybrid structure of time domain phase-inversion symmetric and spread spectrum is proposed. The simulation and experimental results show that time domain phase-inversion symmetric and spread spectrum system can get higher output SNR and under the same transmission conditions, the phase-inversion symmetric spread spectrum technology is superior to the general spread spectrum technology. This method can find a wide use in mobile communications.%为了实现反相对称扩频通讯技术,根据噪声在时域上的相关性以及反相对称法的抗噪原理,将反相对称法与扩频通信相结合实现了一种新的扩频通信方法.仿真结果表明:时域反相对称扩频技术系统能获得较高的输出信噪比,且在相同的传输条件下,反相对称扩频技术的性能优于一般的扩频技术,该通信方法可以在移动通讯中推广应用.

  8. Spread Spectrum Modulation by Using Asymmetric-Carrier Random PWM

    DEFF Research Database (Denmark)

    Mathe, Laszlo; Lungeanu, Florin; Sera, Dezso;

    2012-01-01

    This paper presents a new fixed carrier frequency random PWM method, where a new type of carrier wave is proposed for modulation. Based on simulations and experimental measurements, it is shown that the spread effect of the discrete components from the motor current spectra and acoustic spectra i...

  9. Performance Analysis of Wireless Mobile Radio Hybrid(DS/FH) Spread Spectrum Network

    Institute of Scientific and Technical Information of China (English)

    余晓刚; 王华; 匡镜明

    2004-01-01

    By the flexible redefinition of frequency-occupation and frequency-collision event, the frequency-collision probability of hybrid(DS/FH) spread spectrum network is analyzed. This probability is based on the simultaneous transmission number threshold and is discussed in synchronous and asynchronous circumstances respectively. And then, the network throughput based on the packet correct reception probability is analyzed. Two models which have finite and infinite population respectively is discussed. At last, the numerical results are given.

  10. A High Performance Spread Spectrum Clock Generator Using Two-Point Modulation Scheme

    Science.gov (United States)

    Kao, Yao-Huang; Hsieh, Yi-Bin

    A new spread spectrum clock generator (SSCG) using two-point delta-sigma modulation is presented in this paper. Not only the divider is varied, but also the voltage controlled oscillator is modulated. This technique can enhance the modulation bandwidth so that the effect of EMI suppression is improved with lower order ΣΔ modulator and can simultaneously optimize the jitter and the modulation profile. In addition, the method of two-path is applied to the loop filter to reduce the capacitance value such that the total integration can be achieved. The proposed SSCG has been fabricated in a 0.35μm CMOS process. The clock of 400MHz with center spread ratios of 1.25% and 2.5% are verified. The peak EMI reduction is 19.73dB for the case of 2.5%. The size of chip area is 0.90×0.89mm2.

  11. 3D attitude measurement by means of spread spectrum modulated ultrasonic wave

    Institute of Scientific and Technical Information of China (English)

    Shinji Ohyama; Hiroshi Iwasawa; Sang Il Ko; Junya Takayama

    2007-01-01

    Local position and attitude measurement methods are necessary for the navigation of autonomous robots and the other applications. In this paper, a 3D attitude measurement method is proposed. This method uses the spread spectrum modulated ultrasonic wave for the measurement of the pseudo-distance of each pathway between transmitter and receiver elements that are arranged in an array. The relative attitude between transmitter and receiver unit could be calculated from the relationship between these pseudo-distances. The use of spread spectrum modulation enables the high accuracy, noise tolerance, and coexistence of multiple transmitter devices by code division multiple access (CDMA) between transmitter and receiver elements. A pair of transmitter and receiver prototype for proposed method was manufactured, and the fundamental performance was examined in experiments. As a result, accuracy of σ = 0.78 mm in the pseudo-distance measurement of each pathway between transmitter and receiver elements was confirmed, and about 0.01 rad resolution in the attitude measurement was also confirmed.

  12. Modulated Lapped Biorthogonal Transform for Non-orthogonal Narrowband Interference Excision in Spread Spectrum Communications

    Institute of Scientific and Technical Information of China (English)

    朱丽平; 胡光锐; 赵海波; 朱义胜

    2005-01-01

    Traditional lapped transform domain excision techniques obtain good performance at the expense of increased processing delay. Extension of transform domain filtering techniques to the lapped biorthogonal transform domain can help solve the problem. By incorporating biorthogonality into the lapped transforms, more flexibility is obtained in the design of windows. Thus transform bases with better stopband attenuation can be generated by designing windows, but not by increasing the overlapping factor. In this paper, a new modulated lapped biorthogonal transform (MLBT) with optimized windows is introduced for efficient compression of multi-tone interfering signal energy. The bit error rate (BER) performance of the receiver employing the proposed MLBT excision technique is analyzed and compared with that of the lapped transform domain excision-based receivers. Simulation results demonstrate the improved performance and increased robustness of the proposed technique.

  13. Spread spectrum image steganography.

    Science.gov (United States)

    Marvel, L M; Boncelet, C R; Retter, C T

    1999-01-01

    In this paper, we present a new method of digital steganography, entitled spread spectrum image steganography (SSIS). Steganography, which means "covered writing" in Greek, is the science of communicating in a hidden manner. Following a discussion of steganographic communication theory and review of existing techniques, the new method, SSIS, is introduced. This system hides and recovers a message of substantial length within digital imagery while maintaining the original image size and dynamic range. The hidden message can be recovered using appropriate keys without any knowledge of the original image. Image restoration, error-control coding, and techniques similar to spread spectrum are described, and the performance of the system is illustrated. A message embedded by this method can be in the form of text, imagery, or any other digital signal. Applications for such a data-hiding scheme include in-band captioning, covert communication, image tamperproofing, authentication, embedded control, and revision tracking.

  14. DSSS系统中线性调频干扰抑制技术研究%Linear frequency-modulated interference rejection techniques in spread spectrum communication systems

    Institute of Scientific and Technical Information of China (English)

    朱春华; 穆晓敏

    2003-01-01

    扩频通信系统中宽带干扰的抑制技术越来越引起人们的重视.本文以典型的宽带干扰信号线性调频干扰(Linear Frequency-Modulated,LFM)为例,综述了目前直接序列扩频(Direct Sequence Spread Spectrum,DSSS)系统中宽带干扰抑制的研究热点和成果.

  15. 一种基于方向调制的双波束扩频安全通信系统%A Dual-beam Spread Spectrum Signal Based on Directional Modulation for Secure Communication

    Institute of Scientific and Technical Information of China (English)

    洪涛; 宋茂忠; 刘渝

    2011-01-01

    A dual-beam spread spectrum signal based on directional modulation is proposed to increase the difficulty of the wireless communication tapping. The transmitted signal is not only associated with the spread spectrum sequence but also with the azimuth angle of the receiver. Therefore, this signal is a space spread spectrum signal modulated by the azimuth angle. Simulation results show that the proposed signal offers a safety method for the data transmission compared with the traditional spread spectrum signal.%为了提高通信信息在无线传输过程中的窃听难度,该文提出了一种基于方向调制的双波束扩频信号.发射信号不仅与使用的扩频序列有关,而且与接收机相对于发射机的空间方位信息有关,是一种扩频序列和空间方位信息共同调制的空间扩频信号.仿真结果表明相比于传统的扩频信号,双波束方向调制扩频信号为通信信息在信息传输层面上提供了一种更加安全的无线传输方法.

  16. Spread Spectrum Receiver Electromagnetic Interference (EMI) Test Guide

    Science.gov (United States)

    Wheeler, M. L.

    1998-01-01

    The objective of this test guide is to document appropriate unit level test methods and techniques for the performance of EMI testing of Direct Sequence (DS) spread spectrum receivers. Consideration of EMI test methods tailored for spread spectrum receivers utilizing frequency spreading, techniques other than direct sequence (such as frequency hopping, frequency chirping, and various hybrid methods) is beyond the scope of this test guide development program and is not addressed as part of this document EMI test requirements for NASA programs are primarily developed based on the requirements contained in MIL-STD-46 1 D (or earlier revisions of MIL-STD-46 1). The corresponding test method guidelines for the MIL-STD-461 D tests are provided in MIL-STD-462D. These test methods are well documented with the exception of the receiver antenna port susceptibility tests (intermodulation, cross modulation, and rejection of undesired signals) which must be tailored to the specific type of receiver that is being tested. Thus, test methods addressed in this guide consist only of antenna port tests designed to evaluate receiver susceptibility characteristics. MIL-STD-462D should be referred for guidance pertaining to test methods for EMI tests other than the antenna port tests. The scope of this test guide includes: (1) a discussion of generic DS receiver performance characteristics; (2) a summary of S-band TDRSS receiver operation; (3) a discussion of DS receiver EMI susceptibility mechanisms and characteristics; (4) a summary of military standard test guidelines; (5) recommended test approach and methods; and (6) general conclusions and recommendations for future studies in the area of spread spectrum receiver testing.

  17. Physically Protected Spread Spectrum Communications

    Science.gov (United States)

    2016-04-14

    for the FH system in those days was because of implementation issues, such as a frequency -ringing problem , which occurred whenever a frequency was...PS-TR-2016-0046 HAS BEEN REVIEWED AND IS APPROVED FOR PUBLICATION IN ACCORDANCE WITH ASSIGNED DISTRIBUTION STATEMENT. KHANH PHAM PAUL D. LEVAN...keying (MPSK) and M-ary quadrature amplitude-shift keying (MQAM) for a slow frequency hopping (FH) spread spectrum (SS) system because, recently

  18. Research of Applying DS/FH Hybrid Spread-spectrum Communication in Mine Mobile Communication System%DS/FH混合扩频通信应用于矿井移动通信系统的研究

    Institute of Scientific and Technical Information of China (English)

    谢艳辉; 孙福文

    2009-01-01

    矿井移动通信系统是矿井安全生产、抢险救灾的重要保障.为了提高矿井移动通信系统的可靠性和稳定性,文章提出将DS/FH混合扩频技术应用于矿井移动通信系统的方案,从理论上对DS/FH混合扩频技术进行了详细分析,在此基础上,基于Systemview建立了通信系统的仿真模型.仿真结果和系统的误码率特性分析证明了DS/FH混合扩频技术应用的可行性,为矿井移动通信的发展提供了重要的理论依据.%Mine mobile communication system is the important guarantee of mine safety production and emergency rescue and disaster relief. In order to improve the reliability and stability of mine mobile communication system, the paper put forward a scheme of applying DS/FH hybrid spread-spectrum communication in mine mobile communication system and theoretically made detailed analysis on DS/FH hybrid spread-spectrum communication technology. On the basis of the theory analysis, simulation model of the communication system was established based on Systemview. The simulation result and BER characteristics analysis proved the application feasibility of DS/FH hybrid spread-spectrum communication technology, which provides important theory basis for development of mine mobile communication.

  19. A chaotic spread spectrum system for underwater acoustic communication

    Science.gov (United States)

    Ren, Hai-Peng; Bai, Chao; Kong, Qingju; Baptista, Murilo S.; Grebogi, Celso

    2017-07-01

    Acoustic communication is a key technology to exchange information underwater, which is of great significance to explore marine resources and to marine defense. The underwater acoustic channel is a time-space-frequency varying channel characterized by serious multipath effect, limited frequency band, complex environmental noises and significant Doppler frequency shift phenomenon, which makes underwater acoustic communication with low Bit Error Rate (BER) to be a challenging task. A novel chaotic spread spectrum acoustic communication method with low BER is proposed in this paper. A chaotic signal, generated by a hybrid dynamical system, is used as a spread spectrum sequence at the transmitter end. At the receiver end, a corresponding chaotic matched filter is used to offset the effect of multipath propagation and noise. The proposed method does not require the complicated equalization and modulation-demodulation technologies that are necessary for conventional acoustic communication. Simulation results show that the proposed method has good anti-interference ability and lower BER as compared to other traditional methods.

  20. 基于正交信道的双M-ary扩频通信方案%Scheme of Double Mary Spread-spectrum Communication Based on Orthogonal Channels

    Institute of Scientific and Technical Information of China (English)

    曾志斌; 庄奕琪; 向新; 姚引娣

    2011-01-01

    To solve these problems that spread spectrum codes resource is lack and synchronization is difficult to realize in conventional M-ary spread spectrum system,a new double M-ary spread spectrum hybrid communication system utilizing orthogonal channel was proposed.The system adopts two orthogonal branches to transport information,that is,M-ary biorthogonal spread spectrum modulation in in-phase branch,and CPSK spread spectrum modulation in orthogonal branch.The system has the advantages which can achieve synchronization accurately and fleetly by itself,but rather offer additional synchronization resource.The simulation results demonstrate the system maintaining a comparable performance as the M-ary spread spectrum,but it needs only about quarter of spread spectrum codes of M-ary spread spectrum system,which saves source of spread spectrum codes effectively.%针对传统系统中伪码资源缺乏以及同步实现较困难等方面的问题,提出一种新的双M-ary扩频通信系统方案,该系统采用两条正交支路传输信息,其中在同相支路上采用M-ary双正交扩频调制,在正交支路上采用CPSK扩频调制。该方案能够利用信息自身扩频调制准确实现同步,不需要额外提供同步资源。仿真结果表明,它与传统M-ary扩频方案性能相一致,但在传输比特信息时,它只需约四分之一的传统M-ary扩频的条数,有效地节省了扩频码资源。

  1. Spread spectrum compressed sensing MRI using chirp radio frequency pulses

    CERN Document Server

    Qu, Xiaobo; Zhuang, Xiaoxing; Yan, Zhiyu; Guo, Di; Chen, Zhong

    2013-01-01

    Compressed sensing has shown great potential in reducing data acquisition time in magnetic resonance imaging (MRI). Recently, a spread spectrum compressed sensing MRI method modulates an image with a quadratic phase. It performs better than the conventional compressed sensing MRI with variable density sampling, since the coherence between the sensing and sparsity bases are reduced. However, spread spectrum in that method is implemented via a shim coil which limits its modulation intensity and is not convenient to operate. In this letter, we propose to apply chirp (linear frequency-swept) radio frequency pulses to easily control the spread spectrum. To accelerate the image reconstruction, an alternating direction algorithm is modified by exploiting the complex orthogonality of the quadratic phase encoding. Reconstruction on the acquired data demonstrates that more image features are preserved using the proposed approach than those of conventional CS-MRI.

  2. W-CDMA - Spread Spectrum

    DEFF Research Database (Denmark)

    Jakobsen, Kaj Bjarne

    1999-01-01

    Specifications, Direct Sequence, Frequency Hopping, Hybrid, W-CDMA, and Power Amplifier Linearisation.......Specifications, Direct Sequence, Frequency Hopping, Hybrid, W-CDMA, and Power Amplifier Linearisation....

  3. Spread spectrum time domain reflectometry

    Science.gov (United States)

    Smith, Paul Samuel

    For many years, wiring has been treated as a system that could be installed and expected to work for the life of the aircraft. As aircraft age far beyond their original expected life span, this attitude is rapidly changing. Wiring problems have recently been identified as the cause of several tragic mishaps and hundreds of thousands of lost mission hours. Intermittent wiring faults have been and continue to be difficult to resolve. Test methods that pinpoint faults on the ground can miss intermittent failures. New test methods involving spread spectrum signals are investigated that could be used in flight to locate intermittent failures, including open circuits, short circuits, and arcs. Spread spectrum time domain reflectometry (SSTDR) and sequence time domain reflectometry (STDR) are analyzed in light of the signals commonly present on aircraft wiring. Pseudo noise codes used for the generation of STDR and SSTDR signals are analyzed for application in a STDR/SSTDR test system in the presence of noise. The effects of Mil-Std 1553 and white noise on the STDR and SSTDR signals are discussed analytically, through simulations, and with the use of test hardware. A test system using STDR and SSTDR is designed, built, and used to collect STDR and SSTDR test data. The data collected with the STDR/SSTDR test hardware is analyzed and compared to the theoretical results. Experimental data for open and short circuits collected using SSTDR and a curve fitting algorithm shows a maximum range estimation error of +/-0.2 ft for 75O coaxial cable up to 100ft, and +/-0.6ft for a sample 32.5ft non-controlled impedance aircraft cable. Mil-Std 1553 is specified to operate reliably with a signal-to-noise ratio of 17.5dB, and the SSTDR test system was able to locate an open circuit on a cable also carrying simulated Mil-Std 1553 data where the SSTDR signal was 50dB below the Mil-Std 1553 signal. STDR and SSTDR are shown to be effective in detecting and locating dry and wet arcs on wires.

  4. Spread spectrum communications. Citations from the NTIS data base

    Science.gov (United States)

    Reed, W. E.

    1980-04-01

    The bibliography cites Federally-funded research on the techniques, equipment, and applications of spread spectrum communications. Topics include pseudonoise modulation, coding, signal processing, synchronization, antijamming, interference rejection, antennas, and the use of surface acoustic wave technology. Applications include satellite, television, secure communication, multiples, and multiple access system. This updated bibliography contains 124 abstracts, 25 of which are new entries to the previous edition.

  5. High efficiency spreading spectrum modulation based on double orthogonal complex sequences%基于双正交复序列的高效扩频调制方法

    Institute of Scientific and Technical Information of China (English)

    史小红

    2012-01-01

    提出了一种采用双正交复序列的高效扩频调制与解调方法(DoCS).输入数据比特流被分割为长度为M的组,每组的M比特作为输入码字,从2M-2个长度为L的DoCS序列中选择一条序列进行发送,被选中的序列以QPSK方式调制在载波上,实现扩频通信.文中还提出了一种前向相位校正(FPC)方法来解决该系统中收发两端的载波同步问题.%This paper presents a kind of high efficiency spreading spectrum modulation scheme using double orthogonal complex sequences (DoCS). In this scheme, input data bit - stream is split into many groups with length M. Each group is then mapped into a word of width M and then utilized to select one sequence from 2M-2 DoCS sequences each with length L. After that, the selected sequence is modulated on carrier in QPSK ( quadrature phase shift keying) mode. In addition, a novel method named forward phase correction (FPC) is put forward for carrier recovery.

  6. 时域反相对称与扩频技术的混合技术研究%Hybrid Technology of Time Domain Phase-inversion Symmetry and Spread Spectrum

    Institute of Scientific and Technical Information of China (English)

    冯德武; 谭旭

    2011-01-01

    According to the relativity of noise in time domain and the antinoise principle of time domain phase-inversion symme-tric method, a novel spread spectrum communication method is proposed in combination with phase-inversion symmetric method and spread spectrum communication. The simulation and experimental verification indicate that the time domain phase-inversion symmetric and spread spectrum system can get higher output SNR, and under the same transmission conditions, capability of phase-inversion symmetric spread spectrum technology is superior to the general spread spectrum technology.%根据噪声在时域上的相关性以及反相对称法的抗噪原理,将反相对称法与扩频通信相结合,提出了一种新的扩频通信方法.通过仿真和实验验证表明,时域反相对称扩频技术能使系统获得较高的输出信噪比,且在相同的传输条件下,反相对称扩频技术的性能优于一般的扩频技术.

  7. Hiding Single Photons With Spread Spectrum Technology

    CERN Document Server

    Belthangady, Chinmay; Yu, Ite A; Yin, G Y; Kahn, J M; Harris, S E

    2010-01-01

    We describe a proof-of-principal experiment demonstrating the use of spread spectrum technology at the single photon level. We show how single photons with a prescribed temporal shape, in the presence of interfering noise, may be hidden and recovered.

  8. A demonstrator for a low-cost, cordless, multi-carrier spread-spectrum system.

    Science.gov (United States)

    Kuhne, J; Nahler, A; Hosemann, M; Fettweis, G P; Kovacs, G; Riha, G

    2000-01-01

    Because of the need for spectrally efficient systems for wireless communication, many research activities have been carried out in the area of spread-spectrum techniques. Multi-carrier spread-spectrum (MC-SS) is a new modulation technique with better spectral properties than direct-sequence spread-spectrum (DS-SS). In this paper, a new MC-SS system is introduced. A customized surface acoustic wave (SAW) filter has been designed as a fast analog correlator. A demonstrator testbed has been developed for the 2.4-GHz industrial, scientific, and medical (ISM) band. Experimental measurements of the intermediate frequency (IF) and baseband correlation are presented.

  9. Compressive Sensing for Spread Spectrum Receivers

    DEFF Research Database (Denmark)

    Fyhn, Karsten; Jensen, Tobias Lindstrøm; Larsen, Torben

    2013-01-01

    With the advent of ubiquitous computing there are two design parameters of wireless communication devices that become very important: power efficiency and production cost. Compressive sensing enables the receiver in such devices to sample below the Shannon-Nyquist sampling rate, which may lead...... to a decrease in the two design parameters. This paper investigates the use of Compressive Sensing (CS) in a general Code Division Multiple Access (CDMA) receiver. We show that when using spread spectrum codes in the signal domain, the CS measurement matrix may be simplified. This measurement scheme, named...... Compressive Spread Spectrum (CSS), allows for a simple, effective receiver design. Furthermore, we numerically evaluate the proposed receiver in terms of bit error rate under different signal to noise ratio conditions and compare it with other receiver structures. These numerical experiments show that though...

  10. Principles of spread-spectrum communication systems

    CERN Document Server

    Torrieri, Don

    2015-01-01

    This book provides a concise but lucid explanation of the fundamentals of spread-spectrum systems with an emphasis on theoretical principles. The choice of specific topics is tempered by the author’s judgment of their practical significance and interest to both researchers and system designers. The book contains many improved derivations of the classical theory and presents the latest research results that bring the reader to the frontier of the field. This third edition includes new coverage of topics such as CDMA networks, acquisition and synchronization in DS-CDMA cellular networks, hopsets for FH-CDMA ad hoc networks, implications of information theory, the central limit theorem, the power spectral density of FH/CPM complex envelopes, adaptive filters, and adaptive arrays.   ·         Focuses on the fundamentals of spread-spectrum communication systems and provides current examples of their applications ·         Includes problem sets at the end of each chapter to assist readers in co...

  11. Improving the physical layer security of wireless communication networks using spread spectrum coding and artificial noise approach

    CSIR Research Space (South Africa)

    Adedeji, K

    2016-09-01

    Full Text Available in progress on a proposed hybrid spread spectrum coding and artificial noise approach to improving the physical layer security of wireless communication channels. The authors are optimistic that, the proposed method will further improve the physical layer...

  12. Algorithm design of CCSK information modulation and demodulation in spread spectrum communication system%扩频通信系统CCSK信息调制解调算法设计

    Institute of Scientific and Technical Information of China (English)

    刘江庭; 雷青锋

    2012-01-01

    采用直序扩频的通信系统具有较高的抗干扰能力,但通信信息速率会大幅下降。因此,在通信速率和抗干扰之间找到一个平衡点,是扩频通信系统的一个重要技术问题。文中提出了一种CCSK编码解码技术,该技术可以有效地提高扩频通信系统的通信速率。%Communication system using Direct Sequence Spread Spectrum processes stronger anti-interference ability, while the communication rate is decreased significantly. It is an important technical issue to balance the communication rate and the anti- interference ability. A coding and decoding technology of CCSK was proposed in the paper, which can improve effectively the communication rate of Spread Spectrum Communication system.

  13. The development of advanced spread spectrum LFM waveforms for enhanced SAR and GMTI

    Science.gov (United States)

    Kirk, John C.; Darden, Scott; Majumder, Uttam K.; Minardi, Michael J.; Bell, Mark R.

    2016-05-01

    Advanced spread spectrum linear frequency modulated (LFM) waveforms are being developed for advanced capability synthetic aperture radar (SAR) and ground moving target indication (GMTI) applications. We have demonstrated by analysis and simulation the feasibility of these new type waveforms and are now in the process of implementing them in hardware. The basic approach is to combine a traditional LFM radar waveform with a direct sequence spread spectrum (DSSS) waveform, and then on receive to de-spread the return and capture the resultant LFM return for traditional matched filter processing and enhanced SAR and GMTI. We show the analysis, simulation and some preliminary hardware results.

  14. Research of a newer spread-spectrum CDM telemetry communication system

    Institute of Scientific and Technical Information of China (English)

    王永建; 周廷显

    2004-01-01

    In order to reduce the multiplexing interference and enhance the information data transmission efficiency of the common spread-spectrum telemetry communication system, based on the m-sequence' s parallel move equivalent sequence, one type of spread-spectrum CDM(code division multiplexing) telemetry communication system is issued. The method of anti-multiplexing interference of the system is given, i.e. through using the parallel move equivalent sequence to modulate the antipodal signal of each path's data, then transmitted with the same channel. Data transmission rate,the error probability and multiplexing interference of the proposed system are analyzed. Mathematic analysis provesthat the system not only holds all the merits which are inherent in common spread-spectrum telemetry communication system,but also has better transmission efficiency. Simulation result validated the proved conclusion.

  15. Multicarrier Spread Spectrum for Covert Acoustic Communications

    NARCIS (Netherlands)

    Walree, P.A. van; Sangfelt, E.; Leus, G.

    2008-01-01

    A multicarrier modulation scheme is presented to achieve the objective of clandestine acoustic communications. The modulation consists of a single bit sequence simultaneously modulated onto multiple carriers. As all bands carry the same symbol stream, they can be adaptively combined with a multichan

  16. A Spread Spectrum Approach to Next Generation Intrusion Detection

    Science.gov (United States)

    2005-06-01

    14. SUBJECT TERMS Spread-Spectrum Message Embedding Capacity, Distortion, Spread Spectrum Steganography , Digital Watermarking 16. PRICE CODE 17...message) in another digital signal (image or audio ) called “cover” or “host.” Two applications of watermarking are a) image/ audio authentication and b... steganography , which is an attempt to establish covert communication between trusting parties. The first step in the design of a watermarking system

  17. Application of Wavelet Transform Techniques to Spread Spectrum Demodulation and Jamming

    Science.gov (United States)

    1993-02-26

    This project has investigated the application of wavelet methods in spread spectrum communications. Use of the wavelet transform as an alternative to...signals has been explored. Direct application of the wavelet transform was found to not offer performance advantages over the Fourier transform in...this application. However, use of the wavelet transform in conjunction with Fourier methods provided an efficient hybrid framework for precise

  18. Wide spread spectrum watermarking with side information and interference cancellation

    CERN Document Server

    Guelvouit, Gaëtan Le; 10.1117/12.476839

    2008-01-01

    Nowadays, a popular method used for additive watermarking is wide spread spectrum. It consists in adding a spread signal into the host document. This signal is obtained by the sum of a set of carrier vectors, which are modulated by the bits to be embedded. To extract these embedded bits, weighted correlations between the watermarked document and the carriers are computed. Unfortunately, even without any attack, the obtained set of bits can be corrupted due to the interference with the host signal (host interference) and also due to the interference with the others carriers (inter-symbols interference (ISI) due to the non-orthogonality of the carriers). Some recent watermarking algorithms deal with host interference using side informed methods, but inter-symbols interference problem is still open. In this paper, we deal with interference cancellation methods, and we propose to consider ISI as side information and to integrate it into the host signal. This leads to a great improvement of extraction performance ...

  19. Spread-spectrum clock generation with ferroelectric capacitor-tuned VCOs.

    Science.gov (United States)

    Kabir, Abu; Kalkur, T S

    2013-08-01

    Spread-spectrum clock generation (SSCG) with barium strontium titanate (BST) ferroelectric capacitor-tuned voltage-controlled oscillator (VCO) is described. The performance of this VCO is compared with conventional diode-tuned VCOs. For a simple sinusoidal modulation waveform, a BST capacitor VCO shows uniform spread of energy over a frequency band width compared with a diode-tuned VCO with significant reduction in peak power, reducing the electromagnetic interference (EMI).

  20. Methods and apparatuses using filter banks for multi-carrier spread-spectrum signals

    Science.gov (United States)

    Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

    2014-05-20

    A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

  1. Methods and apparatuses using filter banks for multi-carrier spread spectrum signals

    Energy Technology Data Exchange (ETDEWEB)

    Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A.

    2016-06-14

    A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

  2. Code Synchronization Algorithm Based on Segment Correlation in Spread Spectrum Communication

    Directory of Open Access Journals (Sweden)

    Aohan Li

    2015-10-01

    Full Text Available Spread Spectrum (SPSP Communication is the theoretical basis of Direct Sequence Spread Spectrum (DSSS transceiver technology. Spreading code, modulation, demodulation, carrier synchronization and code synchronization in SPSP communications are the core parts of DSSS transceivers. This paper focuses on the code synchronization problem in SPSP communications. A novel code synchronization algorithm based on segment correlation is proposed. The proposed algorithm can effectively deal with the informational misjudgment caused by the unreasonable data acquisition times. This misjudgment may lead to an inability of DSSS receivers to restore transmitted signals. Simulation results show the feasibility of a DSSS transceiver design based on the proposed code synchronization algorithm. Finally, the communication functions of the DSSS transceiver based on the proposed code synchronization algorithm are implemented on Field Programmable Gate Array (FPGA.

  3. Methods and apparatuses using filter banks for multi-carrier spread-spectrum signals

    Science.gov (United States)

    Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

    2014-10-14

    A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

  4. Methods and apparatuses using filter banks for multi-carrier spread spectrum signals

    Energy Technology Data Exchange (ETDEWEB)

    Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

    2017-01-31

    A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

  5. CYCLOSTATIONARY MODEL IN DS SPREAD SPECTRUM COMMUNICATION SYSTEM

    Institute of Scientific and Technical Information of China (English)

    Gong Xiangyang; Hu Guangrui

    2002-01-01

    During the past research, Direct Sequence (DS) Spread Spectrum (SS) signal is modeled as stationary in most cases. Cyclostationary model for SS signal is introduced in this letter. Compared with stationary model, cyclostationary model can preserve more information,and its advantages are shown through example.

  6. CYCLOSTATIONARY MODEL IN DS SPREAD SPECTRUM COMMUNICATION SYSTEM

    Institute of Scientific and Technical Information of China (English)

    GongXiangyang; HuGuangrui

    2002-01-01

    During the past research,Direct Sequence(DS) Spread Spectrum(SS) signal is modeled as stationary in most cases.Cyclostationary model for SS signal is introduced in this letter.Compared with stationary model,cyclostationary model can preserve more information,and its advantages are shown throrgh example.

  7. Short range spread-spectrum radiolocation system and method

    Science.gov (United States)

    Smith, Stephen F.

    2003-04-29

    A short range radiolocation system and associated methods that allow the location of an item, such as equipment, containers, pallets, vehicles, or personnel, within a defined area. A small, battery powered, self-contained tag is provided to an item to be located. The tag includes a spread-spectrum transmitter that transmits a spread-spectrum code and identification information. A plurality of receivers positioned about the area receive signals from a transmitting tag. The position of the tag, and hence the item, is located by triangulation. The system employs three different ranging techniques for providing coarse, intermediate, and fine spatial position resolution. Coarse positioning information is provided by use of direct-sequence code phase transmitted as a spread-spectrum signal. Intermediate positioning information is provided by the use of a difference signal transmitted with the direct-sequence spread-spectrum code. Fine positioning information is provided by use of carrier phase measurements. An algorithm is employed to combine the three data sets to provide accurate location measurements.

  8. Spread Spectrum Techniques and their Applications to Wireless Communications

    DEFF Research Database (Denmark)

    Prasad, Ramjee; Cianca, E.

    2005-01-01

    Spread Spectrum (SS) radio communications is on the verge of potentially explosive commercial development An SS-based multiple access, such as CDMA, has been chosen for 3G wireless communications. Other current applications of SS techniues are in Wireless LANs and Satellite Navigation Systems...

  9. Spread Spectrum Techniques and their Applications to Wireless Communications

    DEFF Research Database (Denmark)

    Prasad, Ramjee; Cianca, E.

    2005-01-01

    Spread Spectrum (SS) radio communications is on the verge of potentially explosive commercial development An SS-based multiple access, such as CDMA, has been chosen for 3G wireless communications. Other current applications of SS techniues are in Wireless LANs and Satellite Navigation Systems. Ho...

  10. 新的扩频通信调制方法%Novel method of spread spectrum communication

    Institute of Scientific and Technical Information of China (English)

    康家方; 王红星; 赵志勇; 毛忠阳; 刘锡国; 刘传辉

    2013-01-01

      针对传统扩频调制方法频谱效率低的问题,提出了一种新的扩频通信方法——时移位置调制方法,该方法利用伪随机序列良好的自互相关特性,通过扩频调制码元之间的相对位置加载信息,建立了信息传输速率与扩频码或扩频调制带宽之间的联系。理论分析和仿真结果表明,这种调制方法可以大大提高扩频系统的频带利用率,并可有效对抗宽带、窄带以及扩频干扰,为扩频通信技术的研究提供了一种新方法。%As the bandwidth efficiency of traditional spread spectrum modulation is quite low, a novel spread spectrum communication method, which uses the relative position of the spread spectrum modulation symbol to carry information was presented, and the method establishes the relationship between the informa-tion transfer rate and the spreading code or the transmission bandwidth. Theoretical analysis and simulation results show that the modulation method can not only greatly improve the bandwidth efficiency of the spread spectrum system, but al-so effectively combat broadband, narrowband or other spread spectrum interference. This method provides some novel ideas for the future research of spread spectrum communications.

  11. Performance analysis and code recognition for dual N-ary orthogonal hybrid modulation systems

    Institute of Scientific and Technical Information of China (English)

    Qiao Xiaoqiang; Zhao Hangsheng; Cai Yueming

    2008-01-01

    A dual N-ary orthogonal hybrid modulation system is introduced in this paper, which can increase the data rate greatly compared with conventional N-ary orthogonal spread spectrum system, so it can be used for high rate data communication. Then, three code recognition algorithms are presented for dual N-ary orthogonal hybrid modulation system and the analytic bit error rate (BER) performance of the system in additive white Gaussian noise (AWGN) and flat Rayleigh fading channel is derived. Finally, the computer simulation of the system with three code recognition algorithms is performed, which shows that the simplified maximum a posteriori (MAP) algorithm is the best for the system with a compromise between the performance and the complexity.

  12. Study on M-ary Spread Spectrum Underwater Acoustic Communication

    Institute of Scientific and Technical Information of China (English)

    HE Cheng-bing; HUANG Jian-guo; ZHANG Qun-fei; YAN Zhen-hua

    2008-01-01

    Aim at the low data rate of direct sequence spread spectrum underwater acoustic communication, a higher data rate spread spectrum system based on orthogonal sequences was designed. Lake tests were conducted and the results showed the data rate of 189 bps with BER less than 10-4 and SNR about 0 dB in the range of 25 km. In order to improve the data rate of MNSS, a time overlapping method is introduced. The simulation results, based on the real channel model, show its robustness and relative data rate improvement with slight performance decrease if the number of sequences N is small. Meanwhile, a novel method for combining multipath messages using FFT/IFFT is also proposed to improve the performance of matched filters in underwater multipath environments. Simulation results show its effectiveness.

  13. Spread spectrum mobile communication experiment using ETS-V satellite

    Science.gov (United States)

    Ikegami, Tetsushi; Suzuki, Ryutaro; Kadowaki, Naoto; Taira, Shinichi; Sato, Nobuyasu

    1990-01-01

    The spread spectrum technique is attractive for application to mobile satellite communications, because of its random access capability, immunity to inter-system interference, and robustness to overloading. A novel direct sequence spread spectrum communication equipment is developed for land mobile satellite applications. The equipment is developed based on a matched filter technique to improve the initial acquisition performance. The data rate is 2.4 kilobits per sec. and the PN clock rate is 2.4552 mega-Hz. This equipment also has a function of measuring the multipath delay profile of land mobile satellite channel, making use of a correlation property of a PN code. This paper gives an outline of the equipment and the field test results with ETS-V satellite.

  14. An Automatic Interference Recognition Method in Spread Spectrum Communication System

    Institute of Scientific and Technical Information of China (English)

    YANG Xiao-ming; TAO Ran

    2007-01-01

    An algorithm to detect and recognize interferences embedded in a direct sequence spread spectrum (DSSS) communication system is proposed. Based on Welch's averaging modified periodogram method and fractional Fourier transformation (FRFT), the paper proposes a decision tree-based algorithm in which a set of decision criteria for identifying different types of interferences is developed. Simulation results demonstrate that the proposed algorithm provides a high recognition rate and is robust for various ISR and SNR.

  15. Active Spread-Spectrum Steganalysis for Hidden Data Extraction

    Science.gov (United States)

    2011-09-01

    hiding, spread- spectrum embedding, steganalysis, steganography , water- marking ∗Corresponding author. Permission to make digital or hard copies of all...XXX-X/XX/XXXX ...$5.00. 1. INTRODUCTION Steganography , which literally means “covered writing” in Greek, is the process of hiding data under a cover...medium (also referred to as host), such as image, video, or audio [1]- [3]. The basic purpose of steganography is to establish covert communication

  16. Blind Extraction and Security Analysis of Spread Spectrum Hidden Watermarks

    Science.gov (United States)

    2012-04-01

    DATES COVERED (From - To) JAN 2009 – DEC 2010 4. TITLE AND SUBTITLE BLIND EXTRACTION AND SECURITY ANALYSIS OF SPREAD SPECTRUM HIDDEN WATERMARKS ...Multi Signature Embedding, Watermarking , DSSS. 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 15 19a... watermarks John A. Marsh*a,b, and Gerard F. Wohlrabc aSUNY Institute of Technology, 100 Seymour Dr., Utica, NY 13502; bAssured Information

  17. A Novel Pseudo-code Spread Spectrum Modulation Scheme of Frequency Chirp Binary Offset Garrier and Its Characteristics%基于扫频二进制偏移副载波的伪码扩频调制体制及其特性的研究

    Institute of Scientific and Technical Information of China (English)

    杨宜康; 彭澎; 易国锴; 李雪

    2015-01-01

    In this paper, based on the mathematical model of conventional Binary Offset Carrier (BOC) modulation, a novel pseudo-code spread spectrum modulation scheme of Frequency Chirp Binary Offset Carrier (FC-BOC) is proposed. FC-BOC modulation scheme is constructed by introducing the binary offset carrier of frequency chirp instead of binary offset carrier of fixed frequency in the conventional BOC modulation mathematical model. Therefore, FC-BOC signal has a lot of characteristics inherited from BOC signal and several unique characteristics. Simulation and algorithm experiment show that the FC-BOC modulation scheme retains the primary advantages of BOC modulation, moreover, the FC-BOC signal acquires a narrow and sharp correlation main-peak with extremely suppressed side-peaks for avoiding multiple correlation peak ambiguity naturally, flat power spectral density function similar to band-pass white noise. FC-BOC modulation systems, either signal generating algorithms or signal receiving algorithms, have similar structure and equivalent complexity to conventional BOC modulation.%该文基于常规二进制偏移载波(BOC)调制体制的数学模型,提出一种新型的基于扫频二进制偏移载波调制(FC-BOC)的伪码扩频体制。在这种调制体制中,BOC 调制体制数学模型中的固定频率二进制偏移载波被改进为线性扫频二进制偏移载波,使之不仅继承了BOC信号的性质,还具有更加独特的性质。仿真研究和算法实验表明:FC-BOC调制体制保留了BOC调制体制的主要优点,特别是具有狭窄的主相关峰和出色的副峰抑制特征而避免了多相关峰模糊性,功率谱密度函数呈现类似带通白噪声功率谱密度函数的形态。FC-BOC调制体制信号生成算法、接收算法的结构与常规BOC调制体制类似,算法复杂度相当于常规BOC调制体制,适合纯数字编程设计实现。

  18. Chaotic iterations versus Spread-spectrum: chaos and stego security

    OpenAIRE

    Guyeux, Christophe; Friot, Nicolas; Bahi, Jacques

    2010-01-01

    International audience; A new framework for information hiding security, called chaos-security, has been proposed in a previous study. It is based on the evaluation of unpredictability of the scheme, whereas existing notions of security, as stego-security, are more linked to information leaks. It has been proven that spread-spectrum techniques, a well-known stego-secure scheme, are chaos-secure too. In this paper, the links between the two notions of security is deepened and the usability of ...

  19. Spread spectrum image watermarking based on perceptual quality metric.

    Science.gov (United States)

    Zhang, Fan; Liu, Wenyu; Lin, Weisi; Ngan, King Ngi

    2011-11-01

    Efficient image watermarking calls for full exploitation of the perceptual distortion constraint. Second-order statistics of visual stimuli are regarded as critical features for perception. This paper proposes a second-order statistics (SOS)-based image quality metric, which considers the texture masking effect and the contrast sensitivity in Karhunen-Loève transform domain. Compared with the state-of-the-art metrics, the quality prediction by SOS better correlates with several subjectively rated image databases, in which the images are impaired by the typical coding and watermarking artifacts. With the explicit metric definition, spread spectrum watermarking is posed as an optimization problem: we search for a watermark to minimize the distortion of the watermarked image and to maximize the correlation between the watermark pattern and the spread spectrum carrier. The simple metric guarantees the optimal watermark a closed-form solution and a fast implementation. The experiments show that the proposed watermarking scheme can take full advantage of the distortion constraint and improve the robustness in return.

  20. Universal and efficient compressed sensing by spread spectrum and application to realistic Fourier imaging techniques

    CERN Document Server

    Puy, Gilles; Gribonval, Rémi; Wiaux, Yves

    2011-01-01

    We advocate a compressed sensing strategy that consists of multiplying the signal of interest by a wide bandwidth modulation before projection onto randomly selected vectors of an orthonormal basis. Firstly, in a digital setting with random modulation, considering a whole class of sensing bases including the Fourier basis, we prove that the technique is universal in the sense that the required number of measurements for accurate recovery is optimal and independent of the sparsity basis. This universality stems from a drastic decrease of coherence between the sparsity and the sensing bases, which for a Fourier sensing basis relates to a spread of the original signal spectrum by the modulation (hence the name "spread spectrum"). The approach is also efficient as sensing matrices with fast matrix multiplication algorithms can be used, in particular in the case of Fourier measurements. Secondly, these results are confirmed by a numerical analysis of the phase transition of the l1- minimization problem. Finally, w...

  1. Optimal signature design for spread-spectrum steganography.

    Science.gov (United States)

    Gkizeli, Maria; Pados, Dimitris A; Medley, Michael J

    2007-02-01

    For any given host image or group of host images and any (block) transform domain of interest, we find the signature vector that when used for spread-spectrum (SS) message embedding maximizes the signal-to-interference-plus-noise ratio (SINR) at the output of the corresponding maximum-SINR linear filter. We establish that, under a (colored) Gaussian assumption on the transform domain host data, the same derived signature minimizes host distortion for any target message recovery error rate and maximizes the Shannon capacity of the covert steganographic link. Then, we derive jointly optimal signature and linear processor designs for SS embedding in linearly modified transform domain host data and demonstrate orders of magnitude improvement over current SS steganographic practices. Optimized multisignature/multimessage embedding in the same host data is studied as well.

  2. Chaotic spread spectrum watermark of optimal space-filling curves

    Energy Technology Data Exchange (ETDEWEB)

    Feng Guorui [Shanghai Jiao-Tong University, Room 1908 Haoran High-tech Building, 1954 Hua-shan Road, Shanghai 200030 (China); Jiang Lingge [Shanghai Jiao-Tong University, Room 1908 Haoran High-tech Building, 1954 Hua-shan Road, Shanghai 200030 (China); He Chen [Shanghai Jiao-Tong University, Room 1908 Haoran High-tech Building, 1954 Hua-shan Road, Shanghai 200030 (China); Xue Yi [Shanghai Jiao-Tong University, Room 1908 Haoran High-tech Building, 1954 Hua-shan Road, Shanghai 200030 (China)

    2006-02-01

    Spread spectrum watermarking scheme is becoming an important research subject. In this paper, we present a method based on Peano-Hilbert space-filling curves for enhancing the robustness. Peano-Hilbert curve is a continuous mapping from one-dimensional space onto two-dimensional space. It is useful in many applications including quantum mechanics even, and preserves optimal locality. At the same time, we utilize a specified chaotic dynamic system-ICMIC map, which shows lowpass properties when the controlling parameter is devised. In this case, the watermarking detection resorts to the Neyman-Pearson criterion based on some statistical assumptions. Experimental results show that the proposed scheme can work well under JPEG compression and resist line-removal test.

  3. Spread-spectrum communication using binary spatiotemporal chaotic codes

    Science.gov (United States)

    Wang, Xingang; Zhan, Meng; Gong, Xiaofeng; Lai, Choy Heng; Lai, Ying-Cheng

    2005-01-01

    We propose a scheme to generate binary code for baseband spread-spectrum communication by using a chain of coupled chaotic maps. We compare the performances of this type of spatiotemporal chaotic code with those of a conventional code used frequently in digital communication, the Gold code, and demonstrate that our code is comparable or even superior to the Gold code in several key aspects: security, bit error rate, code generation speed, and the number of possible code sequences. As the field of communicating with chaos faces doubts in terms of performance comparison with conventional digital communication schemes, our work gives a clear message that communicating with chaos can be advantageous and it deserves further attention from the nonlinear science community.

  4. Implementasi dan Evaluasi Kinerja Direct Sequence Spread Spectrum menggunakan Wireless Open-Access Research Platform (WARP

    Directory of Open Access Journals (Sweden)

    Aditya Sukmana Putra

    2015-03-01

    Full Text Available Dalam sistem komunikasi nirkabel, khususnya pada dunia komunikasi taktis atau militer, salah satu yang harus dihadapi adalah gangguan jamming.Salah satu sistem yang dapat mengatasi masalah tersebut adalah Direct Sequence Spread Spectrum (DSSS dimana informasi akan dikalikan secara langsung dengan pseudo-noise sequence yang mempunyai laju chip jauh lebih besar.Sistem ini dapat diimplementasikan pada Wireless Open-Access Research Platform (WARP yang merupakan salah satu dari jenis Software Define Radio (SDR.Modul WARP mampu diprogram secara langsung dengan software MATLAB.Kinerja sistem terbaik didapatkan ketika daya sinyal jamming lebih kecil atau sama dengan daya sinyal carrier sistem DSSS. Pada Single Tone Jamming (STJ sistem akan mencapai nilai BER 10E-3  saat daya sinyal jamming 125 % dari daya sinyal sistem DSSS, sedangkan pada Multi Tone Jamming (MTJ sistem akan mencapai BER 10E-3  saat daya sinyal jamming 100 % dari daya sistem DSSS.

  5. Optimal spread spectrum watermark embedding via a multistep feasibility formulation.

    Science.gov (United States)

    Altun, H Oktay; Orsdemir, Adem; Sharma, Gaurav; Bocko, Mark F

    2009-02-01

    We consider optimal formulations of spread spectrum watermark embedding where the common requirements of watermarking, such as perceptual closeness of the watermarked image to the cover and detectability of the watermark in the presence of noise and compression, are posed as constraints while one metric pertaining to these requirements is optimized. We propose an algorithmic framework for solving these optimal embedding problems via a multistep feasibility approach that combines projections onto convex sets (POCS) based feasibility watermarking with a bisection parameter search for determining the optimum value of the objective function and the optimum watermarked image. The framework is general and can handle optimal watermark embedding problems with convex and quasi-convex formulations of watermark requirements with assured convergence to the global optimum. The proposed scheme is a natural extension of set-theoretic watermark design and provides a link between convex feasibility and optimization formulations for watermark embedding. We demonstrate a number of optimal watermark embeddings in the proposed framework corresponding to maximal robustness to additive noise, maximal robustness to compression, minimal frequency weighted perceptual distortion, and minimal watermark texture visibility. Experimental results demonstrate that the framework is effective in optimizing the desired characteristic while meeting the constraints. The results also highlight both anticipated and unanticipated competition between the common requirements for watermark embedding.

  6. The Theoretical Limits of Watermark Spread Spectrum Sequence

    Directory of Open Access Journals (Sweden)

    Nan Jiang

    2014-01-01

    Full Text Available At present, the spread spectrum (SS sequences used in watermark include i.i.d. random sequences and the sequences used in SS communications. They appear earlier than digital watermark. Almost no researchers pay attention to whether they are really fit for watermark. In this paper, we compare the SS watermark channel and the traditional SS communication channel. We find out that their correlation property is different. Considering cropping and translation attacks, we define watermark auto- and cross-correlation and propose Loose Autocorrelation and Tight Cross-Correlation (LAC&TCC properties for SS watermark. The LAC&TCC properties are that, whether or not synchronized, the autocorrelation is equal or close to 1 and the cross-correlation is equal or close to 0. Accordingly, the peak correlation is divided into the peak autocorrelation Ra(l and the peak cross-correlation Rc(l. We establish the lower bound of Rc(l and the higher bound of Ra(l, respectively. The two bounds indicate that, no matter how small the cover is reserved, the extractor can always find a threshold to distinguish auto- and cross-correlation in theory.

  7. The theoretical limits of watermark spread spectrum sequence.

    Science.gov (United States)

    Jiang, Nan; Wang, Jian

    2014-01-01

    At present, the spread spectrum (SS) sequences used in watermark include i.i.d. random sequences and the sequences used in SS communications. They appear earlier than digital watermark. Almost no researchers pay attention to whether they are really fit for watermark. In this paper, we compare the SS watermark channel and the traditional SS communication channel. We find out that their correlation property is different. Considering cropping and translation attacks, we define watermark auto- and cross-correlation and propose Loose Autocorrelation and Tight Cross-Correlation (LAC&TCC) properties for SS watermark. The LAC&TCC properties are that, whether or not synchronized, the autocorrelation is equal or close to 1 and the cross-correlation is equal or close to 0. Accordingly, the peak correlation is divided into the peak autocorrelation Ra (l) and the peak cross-correlation Rc (l). We establish the lower bound of R c (l) and the higher bound of Ra (l), respectively. The two bounds indicate that, no matter how small the cover is reserved, the extractor can always find a threshold to distinguish auto- and cross-correlation in theory.

  8. New PN Even Balanced Sequences for Spread-Spectrum Systems

    Directory of Open Access Journals (Sweden)

    Inácio JAL

    2005-01-01

    Full Text Available A new class of pseudonoise even balanced (PN-EB binary spreading sequences is derived from existing classical odd-length families of maximum-length sequences, such as those proposed by Gold, by appending or inserting one extra-zero element (chip to the original sequences. The incentive to generate large families of PN-EB spreading sequences is motivated by analyzing the spreading effect of these sequences from a natural sampling point of view. From this analysis a new definition for PG is established, from which it becomes clear that very high processing gains (PGs can be achieved in band-limited direct-sequence spread-spectrum (DSSS applications by using spreading sequences with zero mean, given that certain conditions regarding spectral aliasing are met. To obtain large families of even balanced (i.e., equal number of ones and zeros sequences, two design criteria are proposed, namely the ranging criterion (RC and the generating ranging criterion (GRC. PN-EB sequences in the polynomial range are derived using these criteria, and it is shown that they exhibit secondary autocorrelation and cross-correlation peaks comparable to the sequences they are derived from. The methods proposed not only facilitate the generation of large numbers of new PN-EB spreading sequences required for CDMA applications, but simultaneously offer high processing gains and good despreading characteristics in multiuser SS scenarios with band-limited noise and interference spectra. Simulation results are presented to confirm the respective claims made.

  9. New PN Even Balanced Sequences for Spread-Spectrum Systems

    Directory of Open Access Journals (Sweden)

    Inácio J. A. L.

    2005-01-01

    Full Text Available A new class of pseudonoise even balanced (PN-EB binary spreading sequences is derived from existing classical odd-length families of maximum-length sequences, such as those proposed by Gold, by appending or inserting one extra-zero element (chip to the original sequences. The incentive to generate large families of PN-EB spreading sequences is motivated by analyzing the spreading effect of these sequences from a natural sampling point of view. From this analysis a new definition for PG is established, from which it becomes clear that very high processing gains (PGs can be achieved in band-limited direct-sequence spread-spectrum (DSSS applications by using spreading sequences with zero mean, given that certain conditions regarding spectral aliasing are met. To obtain large families of even balanced (i.e., equal number of ones and zeros sequences, two design criteria are proposed, namely the ranging criterion (RC and the generating ranging criterion (GRC. PN-EB sequences in the polynomial range 3 ≤ n ≤ 6 are derived using these criteria, and it is shown that they exhibit secondary autocorrelation and cross-correlation peaks comparable to the sequences they are derived from. The methods proposed not only facilitate the generation of large numbers of new PN-EB spreading sequences required for CDMA applications, but simultaneously offer high processing gains and good despreading characteristics in multiuser SS scenarios with band-limited noise and interference spectra. Simulation results are presented to confirm the respective claims made.

  10. Ultrasonic Multiple-Access Ranging System Using Spread Spectrum and MEMS Technology for Indoor Localization

    Directory of Open Access Journals (Sweden)

    Laurent Segers

    2014-02-01

    Full Text Available Indoor localization of persons and objects poses a great engineering challenge. Previously developed localization systems demonstrate the use of wideband techniques in ultrasound ranging systems. Direct sequence and frequency hopping spread spectrum ultrasound signals have been proven to achieve a high level of accuracy. A novel ranging method using the frequency hopping spread spectrum with finite impulse response filtering will be investigated and compared against the direct sequence spread spectrum. In the first setup, distances are estimated in a single-access environment, while in the second setup, two senders and one receiver are used. During the experiments, the micro-electromechanical systems are used as ultrasonic sensors, while the senders were implemented using field programmable gate arrays. Results show that in a single-access environment, the direct sequence spread spectrum method offers slightly better accuracy and precision performance compared to the frequency hopping spread spectrum. When two senders are used, measurements point out that the frequency hopping spread spectrum is more robust to near-far effects than the direct sequence spread spectrum.

  11. Demodulating Subsampled Direct Sequence Spread Spectrum Signals using Compressive Signal Processing

    DEFF Research Database (Denmark)

    Fyhn, Karsten; Arildsen, Thomas; Larsen, Torben

    2012-01-01

    We show that to lower the sampling rate in a spread spectrum communication system using Direct Sequence Spread Spectrum (DSSS), compressive signal processing can be applied to demodulate the received signal. This may lead to a decrease in the power consumption or the manufacturing price of wireless...... theoretical work is exemplified with a numerical experiment using the IEEE 802.15.4 standard’s 2.4GHz band specification. The numerical results support our theoretical indings and indicate that compressive sensing may be used successfully in spread spectrum communication systems. The results obtained here may...

  12. 100 Gbps Wireless System and Circuit Design Using Parallel Spread-Spectrum Sequencing

    Science.gov (United States)

    Scheytt, J. Christoph; Javed, Abdul Rehman; Bammidi, Eswara Rao; KrishneGowda, Karthik; Kallfass, Ingmar; Kraemer, Rolf

    2017-08-01

    In this article mixed analog/digital signal processing techniques based on parallel spread-spectrum sequencing (PSSS) and radio frequency (RF) carrier synchronization for ultra-broadband wireless communication are investigated on system and circuit level.

  13. On the Extraction of Spread-Spectrum Hidden Data in Digital Media

    Science.gov (United States)

    2012-06-01

    hiding, information hiding, spread-spectrum embedding, steganalysis, steganography , watermarking. I. INTRODUCTION Digital data embedding in digital...tampering, hidden low-probability-to- detect identification for confidential data validation, etc.) and steganography whose purpose is to establish covert...M. J. Medley, “Optimal signature design for spread-spectrum steganography ,” IEEE Trans. Image Proc., vol. 16, pp. 391-405, Feb. 2007. [6] M. Gkizeli

  14. Digital Construction and Characterization of Noise-Like Spread Spectrum Signals

    Science.gov (United States)

    2016-11-01

    Digital Construction and Characterization of Noise-like Spread Spectrum Signals Donald C. Buzanowski II, Frederick J. Block, Thomas C. Royster MIT... construction of the signal. A variety of methods have been proposed to generate these noise-like sequences. A few exam- ples of this include chaotic circuits...them ideal for achieving increased capacity [6]. In this paper, a method for digital construction of multi- amplitude direct sequence spread spectrum

  15. Image and Video based double watermark extraction spread spectrum watermarking in low variance region

    Directory of Open Access Journals (Sweden)

    Mriganka Gogoi

    2013-07-01

    Full Text Available Digital watermarking plays a very important role in copyright protection. It is one of the techniques which are used for safeguarding the origins of the image, audio and video by protecting it against Piracy. This paper proposes a low variance based spread spectrum watermarking for image and video in which the watermark is obtained twice in the receiver. The watermark to be added is a binary image of comparatively smaller size than the Cover Image. Cover Image is divided into number of 8x8 blocks and transform into frequency domain using Discrete Cosine Transform. A gold sequence is added as well as subtracted in each block for each watermark bit. In most cases, researchers has generally used algorithms for extracting single watermark and also it is seen that finding the location of the distorted bit of the watermark due to some attacks is one of the most challenging task. However, in this paper the same watermark is embedded as well as extracted twice with gold code without much distortion of the image and comparing these two watermarks will help in finding the distorted bit. Another feature is that as this algorithm is based on embedding of watermark in low variance region, therefore proper extraction of the watermark is obtained at a lesser modulating factor. The proposed algorithm is very much useful in applications like real-time broad casting, image and video authentication and secure camera system. The experimental results show that the watermarking technique is robust against various attacks.

  16. A Chaos-Based Secure Direct-Sequence/Spread-Spectrum Communication System

    Directory of Open Access Journals (Sweden)

    Nguyen Xuan Quyen

    2013-01-01

    Full Text Available This paper proposes a chaos-based secure direct-sequence/spread-spectrum (DS/SS communication system which is based on a novel combination of the conventional DS/SS and chaos techniques. In the proposed system, bit duration is varied according to a chaotic behavior but is always equal to a multiple of the fixed chip duration in the communication process. Data bits with variable duration are spectrum-spread by multiplying directly with a pseudonoise (PN sequence and then modulated onto a sinusoidal carrier by means of binary phase-shift keying (BPSK. To recover exactly the data bits, the receiver needs an identical regeneration of not only the PN sequence but also the chaotic behavior, and hence data security is improved significantly. Structure and operation of the proposed system are analyzed in detail. Theoretical evaluation of bit-error rate (BER performance in presence of additive white Gaussian noise (AWGN is provided. Parameter choice for different cases of simulation is also considered. Simulation and theoretical results are shown to verify the reliability and feasibility of the proposed system. Security of the proposed system is also discussed.

  17. Optimal transport for secure spread-spectrum watermarking of still images.

    Science.gov (United States)

    Mathon, Benjamin; Cayre, Francois; Bas, Patrick; Macq, Benoit

    2014-04-01

    This paper studies the impact of secure watermark embedding in digital images by proposing a practical implementation of secure spread-spectrum watermarking using distortion optimization. Because strong security properties (key-security and subspace-security) can be achieved using natural watermarking (NW) since this particular embedding lets the distribution of the host and watermarked signals unchanged, we use elements of transportation theory to minimize the global distortion. Next, we apply this new modulation, called transportation NW (TNW), to design a secure watermarking scheme for grayscale images. The TNW uses a multiresolution image decomposition combined with a multiplicative embedding which is taken into account at the distribution level. We show that the distortion solely relies on the variance of the wavelet subbands used during the embedding. In order to maximize a target robustness after JPEG compression, we select different combinations of subbands offering the lowest Bit Error Rates for a target PSNR ranging from 35 to 55 dB and we propose an algorithm to select them. The use of transportation theory also provides an average PSNR gain of 3.6 dB on PSNR with respect to the previous embedding for a set of 2000 images.

  18. Research on and Implement of Direct Sequence Spread Spectrum Communication Based on FPGA%直序扩频的研究与FPGA实现

    Institute of Scientific and Technical Information of China (English)

    王道平; 郭峰; 韩溟

    2011-01-01

    The direct sequence spread spectrum communication(DSSS) is widely developed in military and personal mobile communication for its advantages of high noise resistance,low interception probability,multiple-access communication ability.How to implement a direct sequence spread spectrum communication system used FPGA is researched.A DSSS included transmit and receive module is established based on QUARTUS II.The transmit module is combined with PN generator,spread spectrum modulator,the receive module is combined with match filter and de-spread demodulator.The circuit design and its results are given.%直接序列扩频通信系统以强抗噪声、低截获性和多址通信等特点,在军事及民用移动通信网络中得到广泛应用。文中对直序扩频的FPGA实现技术进行了研究。以Quartus Ⅱ为开发工具,建立了一个初步的直接序列扩频通信系统。设计了发射模块和接收模块,发射模块包括PN码产生器、扩频调制器、接收模块包括匹配滤波器和解扩器;给出了上述模块的实现电路及仿真结果。

  19. Hierarchical Spread Spectrum Fingerprinting Scheme Based on the CDMA Technique

    Directory of Open Access Journals (Sweden)

    Kuribayashi Minoru

    2011-01-01

    Full Text Available Abstract Digital fingerprinting is a method to insert user's own ID into digital contents in order to identify illegal users who distribute unauthorized copies. One of the serious problems in a fingerprinting system is the collusion attack such that several users combine their copies of the same content to modify/delete the embedded fingerprints. In this paper, we propose a collusion-resistant fingerprinting scheme based on the CDMA technique. Our fingerprint sequences are orthogonal sequences of DCT basic vectors modulated by PN sequence. In order to increase the number of users, a hierarchical structure is produced by assigning a pair of the fingerprint sequences to a user. Under the assumption that the frequency components of detected sequences modulated by PN sequence follow Gaussian distribution, the design of thresholds and the weighting of parameters are studied to improve the performance. The robustness against collusion attack and the computational costs required for the detection are estimated in our simulation.

  20. Novel Maximum-based Timing Acquisition for Spread-Spectrum Communications

    Energy Technology Data Exchange (ETDEWEB)

    Sibbetty, Taylor; Moradiz, Hussein; Farhang-Boroujeny, Behrouz

    2016-12-01

    This paper proposes and analyzes a new packet detection and timing acquisition method for spread spectrum systems. The proposed method provides an enhancement over the typical thresholding techniques that have been proposed for direct sequence spread spectrum (DS-SS). The effective implementation of thresholding methods typically require accurate knowledge of the received signal-to-noise ratio (SNR), which is particularly difficult to estimate in spread spectrum systems. Instead, we propose a method which utilizes a consistency metric of the location of maximum samples at the output of a filter matched to the spread spectrum waveform to achieve acquisition, and does not require knowledge of the received SNR. Through theoretical study, we show that the proposed method offers a low probability of missed detection over a large range of SNR with a corresponding probability of false alarm far lower than other methods. Computer simulations that corroborate our theoretical results are also presented. Although our work here has been motivated by our previous study of a filter bank multicarrier spread-spectrum (FB-MC-SS) system, the proposed method is applicable to DS-SS systems as well.

  1. Moving Target Detection and Doppler Extraction Using Digital Spread Spectrum Radar

    Directory of Open Access Journals (Sweden)

    Subhankar Shome

    2014-09-01

    Full Text Available In this paper, we discuss a Spread Spectrum based radar system for car detection in the road and autonomous guidance of vehicles. An autonomous intelligent vehicle has to perform a number of functionalities. Segmentation of the road, determining the boundaries to drive in and recognizing the vehicles and obstacles around are the main tasks for vision guided vehicle navigation. In this article we propose a set of algorithms which lead to the solution of road and vehicle collision using carrier recovery method from car velocity using DSSS RADAR. In such a spread spectrum system, the transmitted signal is spread over a larger bandwidth, which is much wider than the minimum bandwidth required to transmit the information. Automotive radar systems can take advantage of spread spectrum techniques because of their interference rejection, immunity from noise and multipath distortion, and high resolution ranging properties. In addition, there is no need for high-speed, fast-settling frequency synthesizers. Moreover, spread spectrum techniques can improve the reliability of automotive radars. The data from different sensors on different cars can be combined in order to observe the complete car environment. Thus a spread spectrum radar system will allow sharing the same bandwidth also for data link needed by car-to-car communication systems. The algorithm described here is to recover Doppler frequency using 2P power method from which we are able to detect the vehicle condition in road.

  2. 基于FPGA的扩频通信系统的研究及仿真%FPGA-Based Spread Spectrum Communication System and its Simulation

    Institute of Scientific and Technical Information of China (English)

    张福洪; 孙宁波; 戴绍港

    2011-01-01

    扩频通信,被誉为是通信技术的一次重大突破,其用来传输信息的射频带宽远大于信息本身,极大的提高了抗干扰能力,减小了功耗,在现代通信中已经成为了关键的技术.给出了一种基于FPGA的QUARTUS 9.0环境中的数字通信模型的仿真,着重解决了扩频通信系统的调制器的设计实现,并且仿真验证了其正确性,该调制器具有通用性和实现的便捷性,大大缩短了研发的进程.%Spread spectrum communication is known as a great breakthrough in communications technology. The RF bandwidth used to transmit information is much wider than the information itself. Spread spectrum communication improves the anti-interference ability greatly, reduces power consumption and has become the key technology in modern communication. This paper presents a FPGA-based simulation for digital communication model in QUARTUS 9.0 environment, lays emphasis on designing and implementing the modulator of spread spectrum communication system and verifies the correctness of the modulator by simulation. The modulator is of universality and easy to realize, greatly reducing the development process.

  3. Chaotic-Laser-Based True Random Sequence Generation for Spread-Spectrum Communications

    Institute of Scientific and Technical Information of China (English)

    张朝霞; 周俊杰; 张东泽; 傅正; 张建忠

    2012-01-01

    We propose a scheme for spread-spectrum communications using true random sequences generated by chaotic semiconductor lasers as spreading codes. These sequences can eliminate the inherent periodicity of pseudorandom sequences,enlarge the capacity of spread-spectrum codes,improve communication security,and increase the number ot users of the system.When a true random sequence with an appropriate length is used as thespread-spectrum code and the information speed is maintained constant,the system acquires a greater spreadspectrum gain and a lower bit-error ratio (BER) than the traditional spread-spectrum system.The communication security is also enhanced.The BER smoothly increases with the number of users,which indicates the good multipleaccess capability of the system.

  4. Steganography on multiple MP3 files using spread spectrum and Shamir's secret sharing

    Science.gov (United States)

    Yoeseph, N. M.; Purnomo, F. A.; Riasti, B. K.; Safiie, M. A.; Hidayat, T. N.

    2016-11-01

    The purpose of steganography is how to hide data into another media. In order to increase security of data, steganography technique is often combined with cryptography. The weakness of this combination technique is the data was centralized. Therefore, a steganography technique is develop by using combination of spread spectrum and secret sharing technique. In steganography with secret sharing, shares of data is created and hidden in several medium. Medium used to concealed shares were MP3 files. Hiding technique used was Spread Spectrum. Secret sharing scheme used was Shamir's Secret Sharing. The result showed that steganography with spread spectrum combined with Shamir's Secret Share using MP3 files as medium produce a technique that could hid data into several cover. To extract and reconstruct the data hidden in stego object, it is needed the amount of stego object which more or equal to its threshold. Furthermore, stego objects were imperceptible and robust.

  5. Sparsity analysis of DS spread spectrum signals via theoretical analysis and dictionary learning

    Science.gov (United States)

    Wang, Kai; Wu, Bin; Wang, Bo

    2017-04-01

    For the purpose of solving the problem of high sampling rate and massive data processing brought by high bandwidth in the field of Aerospace Communication, researchers applied CS theory to spread spectrum signal processing. Sparsity analysis is the prerequisite for the application of CS theory. This paper studies the sparsity of the DS spread spectrum signals, which is the most common kind of signal in the current TT&C systems. Based on the theoretical analysis we get the sparse dictionary, then the dictionary is optimized by K-SVD dictionary learning algorithm. The simulation results show that the two signals have strong sparsity in the constructed sparse base dictionary, which lays a theoretical foundation for the TT&C spread spectrum signal processing based on CS theory.

  6. The Simulation of Direct Spread Spectrum System based on Transmitted Reference Signal

    Directory of Open Access Journals (Sweden)

    Wu Guoqiang

    2013-01-01

    Full Text Available Code synchronization is indispensable in the direct spread spectrum system because it can influence the incepting capacity directly. Transmitted reference is proposed in this paper to predigest the code synchronization circuit of the incepting machine in order to reduce the cost of time, energy and money for the development of the code synchronization technology. The software named Systemview is employed to simulate the transmitted reference direct spread spectrum system. The simulation results were presented with the condition of gauss noise and temperature. It demonstrates that the proposed simulation has significant effect and benefit in engineering.

  7. Analysis of BER Performance of the Spread Spectrum Communication System with Constrained Spreading Code

    OpenAIRE

    長谷川, 孝明; 羽渕, 裕真

    1996-01-01

    Copyright notice. c1996 IEICE All rights reserved. "Analysis of BER Performance of the Spread Spectrum Communication System with Constrained Spreading Code"Hiromasa HABUCHI, Toshio TAKEBAYASHI, Takaaki HASEGAWA. IEICE TRANSACTIONS on Fundamentals of Electronics, Communications and Computer Sciences ,1996 Vol.E79-A No.12 pp. 2078-2080 許諾No.07RB0055.

  8. 基于SystemView的扩频通信系统的仿真和分析%Simulation and analysis of spread-spectrum communication system based on systemview

    Institute of Scientific and Technical Information of China (English)

    颜剑华; 任峻

    2016-01-01

    本文阐述了扩频通信的基本原理,使用Systemview软件对扩频通信进行仿真设计。在仿真设计中,我们使用了触发器产生PN周期伪随即序列作为扩频码,使用2PSK调制信号与扩频码相乘实现扩频调制。最后,我们结合香农公式以及信号在扩频通信传输过程中的频谱变化,证明通过扩频通信,能在噪声增加的情况下,仍然保持信号的高速无差错传输。%This paper describes the basic principles of spread-spectrum communication, builds simulation system of spread-spectrum communication based on Systemview. In the simulation design, we use a trigger to generate a pseudo-period PN se-quence as a spreading code, and multiply 2PSK signal and spread code to realize spread spectrum modulation. Finally, we com-bine the Shannon formula and changes of signal spectrum in the spread spectrum transmission to evidence that signal can maintain a error-free transmission at high speed under the high noise by using spread spectrum communication.

  9. Pseudorandom Sequences in Spread-Spectrum Communications Generated by Cellular Automata

    Directory of Open Access Journals (Sweden)

    F.C. Ordaz-Salazar

    2012-10-01

    Full Text Available Dynamical systems methods have been recently used in spread-spectrum digital communication systems. Theexpansion of the spectrum using a pseudorandom sequence with a higher frequency than the information signal is thekey feature for its robustness against the signal traveling interference through the channel. In this work, we propose togenerate pseudorandom sequences by employing cellular automata and we check these sequences have thenecessary properties which are required in modern communication systems. The computed sequences obtained bythe cellular automata are tested in a quadrature phase shift keying (QPSK spread-spectrum communication system.The efficiency of the system is analyzed by computing the bit error rate under different signal to noise ratio conditions.These results are compared with systems that employ Golden code and other typical pseudorandom sequences.

  10. Sum-SINR/sum-capacity optimal multisignature spread-spectrum steganography

    Science.gov (United States)

    Wei, Lili; Pados, Dimitris A.; Batalama, Stella N.; Medley, Michael J.

    2008-04-01

    For any given digital host image or audio file (or group of hosts) and any (block) transform domain of interest, we find an orthogonal set of signatures that achieves maximum sum-signal-to-interference-plus-noise ratio (sum- SINR) spread-spectrum message embedding for any fixed embedding amplitude values. We also find the sumcapacity optimal amplitude allocation scheme for any given total distortion budget under the assumption of (colored) Gaussian transform-domain host data. The practical implication of the results is sum-SINR, sumcapacity optimal multiuser/multisignature spread-spectrum data hiding in the same medium. Theoretically, the findings establish optimality of the recently presented Gkizeli-Pados-Medley multisignature eigen-design algorithm.

  11. Chaotic iterations versus Spread-spectrum: topological-security and stego-security

    CERN Document Server

    Guyeux, Christophe; Bahi, Jacques M

    2011-01-01

    A new framework for information hiding security, called topological-security, has been proposed in a previous study. It is based on the evaluation of unpredictability of the scheme, whereas existing notions of security, as stego-security, are more linked to information leaks. It has been proven that spread-spectrum techniques, a well-known stego-secure scheme, are topologically-secure too. In this paper, the links between the two notions of security is deepened and the usability of topological-security is clarified, by presenting a novel data hiding scheme that is twice stego and topological-secure. This last scheme has better scores than spread-spectrum when evaluating qualitative and quantitative topological-security properties. Incidentally, this result shows that the new framework for security tends to improve the ability to compare data hiding scheme.

  12. Moving Target Detection and Doppler Extraction Using Digital Spread Spectrum Radar

    OpenAIRE

    2014-01-01

    In this paper, we discuss a Spread Spectrum based radar system for car detection in the road and autonomous guidance of vehicles. An autonomous intelligent vehicle has to perform a number of functionalities. Segmentation of the road, determining the boundaries to drive in and recognizing the vehicles and obstacles around are the main tasks for vision guided vehicle navigation. In this article we propose a set of algorithms which lead to the solution of road and vehicle collision using carrier...

  13. Spread Spectrum Watermark Based on Wavelet Transform for Still Digital Image

    Institute of Scientific and Technical Information of China (English)

    Shao Hai-mei; Mei Tian-can; Qin Qian-qing

    2004-01-01

    The proposed method inserts a watermark into the spectral components of the data using techniques analogous to spread spectrum communications, hiding a narrow band signal in a wideband channel. The watermark is difficult for an attacker to remove. It is also robust to common signal and geometric distortion such as JPEG compression, cropping and scaling. In addition, the watermark can be extracted accurately without source host image at the receiver.

  14. Modulated Lapped Biorthogonal Transform for Non-orthogonal Narrowband Interference Excision in Spread Spectrum Communications%基于调制重叠双正交变换的扩频通信非正交型窄带干扰抑制

    Institute of Scientific and Technical Information of China (English)

    朱丽平; 胡光锐; 赵海波; 朱义胜

    2005-01-01

    Traditional lapped transform domain excision techniques obtain good performance at the expense of increased processing delay. Extension of transform domain filtering techniques to the lapped biorthogonal transform domain can help solve the problem. By incorporating biorthogonality into the lapped transforms, more flexibility is obtained in the design of windows. Thus transform bases with better stopband attenuation can be generated by designing windows, but not by increasing the overlapping factor. In this paper, a new modulated lapped biorthogonal transform (MLBT) with optimized windows is introduced for efficient compression of multi-tone interfering signal energy. The bit error rate (BER) performance of the receiver employing the proposed MLBT excision technique is analyzed and compared with that of the lapped transform domain excision-based receivers. Simulation results demonstrate the improved performance and increased robustness of the proposed technique.

  15. Substrate specificity of hybrid modules from peptide synthetases

    NARCIS (Netherlands)

    Elsner, A; Engert, H; Saenger, W; Hamoen, L; Venema, G; Bernhard, F

    1997-01-01

    Homologous modules from two different peptide synthetases were analyzed for functionally equivalent regions. Hybrids between the coding regions of the phenylalanine-activating module of tyrocidine synthetase and the valine activating module of surfactin synthetase were constructed by combining the t

  16. Filter-Bank-Based Narrowband Interference Detection and Suppression in Spread Spectrum Systems

    Directory of Open Access Journals (Sweden)

    Tobias Hidalgo Stitz

    2004-07-01

    Full Text Available A filter-bank-based narrowband interference detection and suppression method is developed and its performance is studied in a spread spectrum system. The use of an efficient, complex, critically decimated perfect reconstruction filter bank with a highly selective subband filter prototype, in combination with a newly developed excision algorithm, offers a solution with efficient implementation and performance close to the theoretical limit derived as a function of the filter bank stopband attenuation. Also methods to cope with the transient effects in case of frequency hopping interference are developed and the resulting performance shows only minor degradation in comparison to the stationary case.

  17. Direct Sequence Spread Spectrum Steganographic Scheme for IEEE 802.15.4

    CERN Document Server

    Zielinska, Elzbieta

    2011-01-01

    This work addresses the issues related to network steganography in IEEE 802.15.4 Wireless Personal Area Networks (WPAN). The proposed communication scheme employs illicit Direct Sequence Spread Spectrum code sequences for the transmission of steganographic data. The presented approach is a compromise between minimising the probability of covert channel disclosure and providing robustness against random errors and a high steganographic data rate. The conducted analyses show that it is possible to create a covert channel with a data rate comparable to the raw data rate of IEEE 802.15.4 without much impact on the perceived receiver sensitivity, the Chip Error Rate and the Bit Error Rate.

  18. Chaotic iterations versus Spread-spectrum: topological-security and stego-security

    OpenAIRE

    Guyeux, Christophe; Friot, Nicolas; Bahi, Jacques M.

    2011-01-01

    A new framework for information hiding security, called topological-security, has been proposed in a previous study. It is based on the evaluation of unpredictability of the scheme, whereas existing notions of security, as stego-security, are more linked to information leaks. It has been proven that spread-spectrum techniques, a well-known stego-secure scheme, are topologically-secure too. In this paper, the links between the two notions of security is deepened and the usability of topologica...

  19. Design and performance evaluation of a wideband FM spread-spectrum multiple-access system

    Science.gov (United States)

    Wachsman, R. H.; Ghais, A. F.

    1971-01-01

    The system described performs the tracking and communications functions of a tracking and data relay satellite system (TDRS). The spread-spectrum signal format is achieved through wide deviation FM by a sinusoidal subcarrier unique to each multiple-access user. A compound phase-locked loop tracks carrier and subcarrier and demodulates data and ranging signals. Design parameters of user and ground terminals for TDRS are given. Acquisition procedures are described. Performance analyses are presented including the effects of noise, RFI, multipath and other users.

  20. Using Spread Spectrum Transform for Fast and Robust Simultaneous Measurement in Active Sensors with Multiple Emitters

    DEFF Research Database (Denmark)

    Harbo, Anders La-Cour; Stoustrup, Jakob

    2002-01-01

    We present a signal processing algorithm for making robust and simultaneous measurements in an active sensor, which has one or more emitters and a receiver, and which employs some sort of signal processing hardware. Robustness means low sensitivity to time and frequency localized disturbances...... on previously transmitted signals. This also means that only few calculations are needed. Furthermore, the suggested spread spectrum transform has a low complexity, a high numerical stability, and is easily implemented in simple signal processing hardware. The presented method is therefore suitable for low-cost...

  1. Hybrid Enrichment Verification Array: Module Characterization Studies

    Energy Technology Data Exchange (ETDEWEB)

    Zalavadia, Mital A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, Leon E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McDonald, Benjamin S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kulisek, Jonathan A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mace, Emily K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Deshmukh, Nikhil S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    The work presented in this report is focused on the characterization and refinement of the Hybrid Enrichment Verification Array (HEVA) approach, which combines the traditional 186-keV 235U signature with high-energy prompt gamma rays from neutron capture in the detector and surrounding collimator material, to determine the relative enrichment and 235U mass of the cylinder. The design of the HEVA modules (hardware and software) deployed in the current field trial builds on over seven years of study and evolution by PNNL, and consists of a ø3''×3'' NaI(Tl) scintillator coupled to an Osprey digital multi-channel analyzer tube base from Canberra. The core of the HEVA methodology, the high-energy prompt gamma-ray signature, serves as an indirect method for the measurement of total neutron emission from the cylinder. A method for measuring the intrinsic efficiency of this “non-traditional” neutron signature and the results from a benchmark experiment are presented. Also discussed are potential perturbing effects on the non-traditional signature, including short-lived activation of materials in the HEVA module. Modeling and empirical results are presented to demonstrate that such effects are expected to be negligible for the envisioned implementation scenario. In comparison to previous versions, the new design boosts the high-energy prompt gamma-ray signature, provides more flexible and effective collimation, and improves count-rate management via commercially available pulse-processing electronics with a special modification prompted by PNNL.

  2. THE STUDY OF A BOCC M-ARY SPREAD SPECTRUM SCHEME

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    M-ary spread spectrum technique has been found wide applications in wireless communications, but it needs too many orthogonal spreading codes and its despreading/demodulation is quite complex computationally, which limit its wider applications. This paper proposes a novel scheme for Code Division Multiple Access (CDMA) communication systems based on M-ary spread spectrum, where only one prototype spreading code is assigned to each user and the codes for different users are orthogonal or quasi-orthogonal with each other. The M spreading codes of each user to represent K bits data are generated by circularly shifting the assigned code and reversing its polarity. The spreading codes generated like that are called as BiOrthogonal Cyclic Codes (BOCCs). At the receiver of the system, a transform domain matched-filter implemented by means of Fast Fourier Transform (FFT) is employed to despread and demodulate the received signals, which has very low computational complexity. The results of simulation experiments and bit-error performance analysis show that the proposed scheme is practical and very useful in many cases.

  3. Periodic performance of the chaotic spread spectrum sequence on finite precision

    Institute of Scientific and Technical Information of China (English)

    Zhu Canyan; Zhang Lihua; Wang Yiming; Liu Jiasheng; Mao Lingfeng

    2008-01-01

    It is well known that the periodic performance of spread spectrum sequence heavily affects the correlative and secure characteristics of communication systems.The chaotic binary sequence is paid more and more attention since it is one kind of applicable spread spectrum sequences.However,there are unavoidable short cyclic problems for chaotic binary sequences in finite precision.The chaotic binary sequence generating methods are studied first.Then the short cyclic behavior of the chaotic sequences is analyzed in detail,which are generated by quantification approaches with finite word-length.At the same time,a chaotic similar function is defined for presenting the cyclic characteristics of the sequences.Based on these efforts,an improved method with scrambling control for generating chaotic binary sequences is proposed.To quantitatively describe the improvement of periodic performance of the sequences,an orthogonal estimator is also defined.Some simulating results are provided.From the theoretical deduction and the experimental results,it is concluded that the proposed method can effectively increase the period and raise the complexity of the chaotic sequences to some extent.

  4. Delay Tracking of Spread-Spectrum Signals for Indoor Optical Ranging

    Directory of Open Access Journals (Sweden)

    David Salido-Monzú

    2014-12-01

    Full Text Available Delay tracking of spread-spectrum signals is widely used for ranging in radio frequency based navigation. Its use in non-coherent optical ranging, however, has not been extensively studied since optical channels are less subject to narrowband interference situations where these techniques become more useful. In this work, an early-late delay-locked loop adapted to indoor optical ranging is presented and analyzed. The specific constraints of free-space infrared channels in this context substantially differ from those typically considered in radio frequency applications. The tracking stage is part of an infrared differential range measuring system with application to mobile target indoor localization. Spread-spectrum signals are used in this context to provide accurate ranging while reducing the effect of multipath interferences. The performance of the stage regarding noise and dynamic errors is analyzed and validated, providing expressions that allow an adequate selection of the design parameters depending on the expected input signal characteristics. The behavior of the stage in a general multipath scenario is also addressed to estimate the multipath error bounds. The results, evaluated under realistic conditions corresponding to an 870 nm link with 25 MHz chip-rate, built with low-cost up-to-date devices, show that an overall error below 6% of a chip time can be achieved.

  5. Delay tracking of spread-spectrum signals for indoor optical ranging.

    Science.gov (United States)

    Salido-Monzú, David; Martín-Gorostiza, Ernesto; Lázaro-Galilea, José Luis; Martos-Naya, Eduardo; Wieser, Andreas

    2014-12-05

    Delay tracking of spread-spectrum signals is widely used for ranging in radio frequency based navigation. Its use in non-coherent optical ranging, however, has not been extensively studied since optical channels are less subject to narrowband interference situations where these techniques become more useful. In this work, an early-late delay-locked loop adapted to indoor optical ranging is presented and analyzed. The specific constraints of free-space infrared channels in this context substantially differ from those typically considered in radio frequency applications. The tracking stage is part of an infrared differential range measuring system with application to mobile target indoor localization. Spread-spectrum signals are used in this context to provide accurate ranging while reducing the effect of multipath interferences. The performance of the stage regarding noise and dynamic errors is analyzed and validated, providing expressions that allow an adequate selection of the design parameters depending on the expected input signal characteristics. The behavior of the stage in a general multipath scenario is also addressed to estimate the multipath error bounds. The results, evaluated under realistic conditions corresponding to an 870 nm link with 25 MHz chip-rate, built with low-cost up-to-date devices, show that an overall error below 6% of a chip time can be achieved.

  6. Cryogenic analog-to-digital converters using spread spectrum technology for coherent receivers

    Science.gov (United States)

    Shiao, Yu-Shao Jerry; Chiueh, Tzihong; Hu, Robert

    2012-09-01

    We propose analog-to-digital converters (ADCs) using spread spectrum technology in cryogenic receivers or at warm room temperature for coherent receiver backend systems. As receiver signals are processed and stored digitally, ADCs play a critical role in backend read-out systems. To minimize signal distortion, the down-converted signals should be digitized without further transportation. However, digitizing the signals in or near receivers may cause radio frequency interference. We suggest that spread spectrum technology can reduce the interference significantly. Moreover, cryogenic ADCs at regulated temperature in receiver dewars may also increase the bandwidth usage and simplify the backend digital signal process with fewer temperature-dependant components. While industrial semiconductor technology continuously reduces transistor power consumption, low power high speed cryogenic ADCs may become a better solution for coherent receivers. To examine the performance of cooled ADCs, first, we design 4 bit 65 nm and 40 nm CMOS ADCs specifically at 10 K temperature, which commonly is the second stage temperature in dewars. While the development of 65 nm and 40 nm CMOS ADCs are still on-going, we estimate the ENOB is 2.4 at 10 GSPS, corresponding to the correlation efficiency, 0.87. The power consumption is less than 20 mW.

  7. Implementasi Frequency Hopping Spread Spectrum (FHSS pada DSK TMS320C6416T

    Directory of Open Access Journals (Sweden)

    Ocki Aditya Muhammad

    2014-03-01

    Full Text Available Teknik Spread Spectrum  (spektral tersebar merupakan salah satu jenis teknik pengiriman sinyal yang tahan terhadap gangguan berupa noise maupun jamming. Pada saat proses melakukan pengiriman informasi, teknik ini mempunyai tingkat keamanan informasi yang cukup tinggi. Pada komunikasi Frequency-Hopping Spread Spectrum (FHSS, sinyal informasi akan dilompatkan secara acak pada beberapa frekuensi pembawa yang tersedia. Teknik FHSS ini memiliki ketahanan yang tinggi terhadap jamming, khususnya jenis Single Tone Jamming (STJ dan Multi Tone Jamming (MTJ. Hasil pengujian akan ditampilkan dalam bentuk grafik BER terhadap variasi nilai Eb/No dan grafik BER terhadap variasi Amplitudo Jamming. STJ dan MTJ mulai mengganggu sistem FHSS saat kondisi Eb/No 20dB, frekuensi jamming sama dengan frekuensi pembawa, dan amplitudo jamming lebih dari 100% terhadap amplitudo sinyal pembawa, jika dibawah 100% menghasilkan nilai BER 10-5 jadi masih dalam kondisi terbaik. Hasil penelitian ini menunjukkan bahwa sistem FHSS lebih tahan terhadap Single Tone dan Multi Tone Jamming dibandingkan sistem 4-ary FSK.

  8. A new wideband HF technique for MHz-bandwidth spread-spectrum radio communications

    Science.gov (United States)

    Perry, B. D.

    1983-09-01

    The one-way results are seen as demonstrating that equalized MHz-bandwidth skywave HF channels can be achieved using long-range one-hop F-layer propagation paths. It has thus become possible to use direct-sequence pseudo-noise or coherent fast-frequency-hop signaling at HF with processing gains of several orders of magnitude for teletype data rates. Possibilities are seen for using the spread spectrum in covert and/or jam-resistant communications. What is more, the equalized wideband HF channel is not subject to the fading caused by multiple propagation modes; as a consequence, it is substantially more reliable than the traditional narrow-band HF channel. Conversely, reliability comparable to traditional HF can be attained at greatly reduced signal margins. Since the time stability of the wideband HF channel is of the order of 10 s, very little channel-transmission time is needed for initializing and maintaining the equalizer. It is noted that probe signals similar to the channel-measuring waveform described here or spread-spectrum training sequences at the beginning of each message are adequate. Results from the 1982 two-way experimentation show that N(omega) is not reciprocal between terminals 2000 km apart.

  9. Interference Excision in Spread Spectrum Communications Using Adaptive Positive Time-Frequency Analysis

    Directory of Open Access Journals (Sweden)

    Krishnan Sridhar

    2007-01-01

    Full Text Available This paper introduces a novel algorithm to excise single and multicomponent chirp-like interferences in direct sequence spread spectrum (DSSS communications. The excision algorithm consists of two stages: adaptive signal decomposition stage and directional element detection stage based on the Hough-Radon transform (HRT. Initially, the received spread spectrum signal is decomposed into its time-frequency (TF functions using an adaptive signal decomposition algorithm, and the resulting TF functions are mapped onto the TF plane. We then use a line detection algorithm based on the HRT that operates on the image of the TF plane and detects energy varying directional elements that satisfy a parametric constraint. Interference is modeled by reconstructing the corresponding TF functions detected by the HRT, and subtracted from the received signal. The proposed technique has two main advantages: (i it localizes the interferences on the TF plane with no cross-terms, thus facilitating simple filtering techniques based on thresholding of the TF functions, and is an efficient way to excise the interference; (ii it can be used for the detection of any directional interferences that can be parameterized. Simulation results with synthetic models have shown successful performance with linear and quadratic chirp interferences for single and multicomponent interference cases. The proposed method excises the interference even under very low SNR conditions of  dB, and the technique could be easily extended to any interferences that could be represented by a parametric equation in the TF plane.

  10. Efficient blind decoders for additive spread spectrum embedding based data hiding

    Science.gov (United States)

    Valizadeh, Amir; Wang, Z. Jane

    2012-12-01

    This article investigates efficient blind watermark decoding approaches for hidden messages embedded into host images, within the framework of additive spread spectrum (SS) embedding based for data hiding. We study SS embedding in both the discrete cosine transform and the discrete Fourier transform (DFT) domains. The contributions of this article are multiple-fold: first, we show that the conventional SS scheme could not be applied directly into the magnitudes of the DFT, and thus we present a modified SS scheme and the optimal maximum likelihood (ML) decoder based on the Weibull distribution is derived. Secondly, we investigate the improved spread spectrum (ISS) embedding, an improved technique of the traditional additive SS, and propose the modified ISS scheme for information hiding in the magnitudes of the DFT coefficients and the optimal ML decoders for ISS embedding are derived. We also provide thorough theoretical error probability analysis for the aforementioned decoders. Thirdly, sub-optimal decoders, including local optimum decoder (LOD), generalized maximum likelihood (GML) decoder, and linear minimum mean square error (LMMSE) decoder, are investigated to reduce the required prior information at the receiver side, and their theoretical decoding performances are derived. Based on decoding performances and the required prior information for decoding, we discuss the preferred host domain and the preferred decoder for additive SS-based data hiding under different situations. Extensive simulations are conducted to illustrate the decoding performances of the presented decoders.

  11. Nonstationary Interference Excision in Time-Frequency Domain Using Adaptive Hierarchical Lapped Orthogonal Transform for Direct Sequence Spread Spectrum Communications

    Directory of Open Access Journals (Sweden)

    Zhu Yi-Sheng

    2003-01-01

    Full Text Available An adaptive hierarchical lapped orthogonal transform (HLOT exciser is proposed for tracking, localizing, and rejecting the nonstationary interference in direct sequence spread spectrum (DSSS communications. The method is based on HLOT. It utilizes a fast dynamic programming algorithm to search for the best basis, which matches the interference structure best, in a library of lapped orthogonal bases. The adaptive HLOT differs from conventional block transform and the more advanced modulated lapped transform (MLT in that the former produces arbitrary time-frequency tiling, which can be adapted to the signal structure, while the latter yields fixed tilings. The time-frequency tiling of the adaptive HLOT can be time varying, so it is also able to track the variations of the signal time-frequency structure. Simulation results show that the proposed exciser brings significant performance improvement in the presence of nonstationary time-localized interference with or without instantaneous frequency (IF information compared with the existing block transform domain excisers. Also, the proposed exciser is effective in suppressing narrowband interference and combined narrowband and time-localized impulsive interference.

  12. Self-Encoded Spread Spectrum Modulation for Robust Anti-Jamming Communication

    Science.gov (United States)

    2009-06-30

    0000 AFOSR / RSE 875 North Randolph Street, Suit 325 | Room 3112 Arlington, Virginia 22203-1768 AFOSR/ RSE AFRL-OSR-VA-TR-2012-0505 1) DISTRIBUTION...SESS), SESS technique, Jam-Resistant or Anti-Jamming (AJ), Pseudo-Random Noise (PN) U U U UU Jon Sjogren, RSE (Program Manager) 703.696.6564 Defense

  13. Portable instrument for in-vivo infrared oxymetry using spread-spectrum modulation

    CERN Document Server

    Trevisan, S; Giardini, M E

    2007-01-01

    Near Infrared Spectroscopy (NIRS) can be employed to monitor noninvasively and continuously local changes in hemodynamics and oxygenation of human tissues. A portable NIRS research-grade acquisition system, dedicated to measurements during muscular exercise, is presented. The instrument is able to control up to eight LED sources and two detectors. A digital correlation technique, implemented on a single-chip RISC microcontroller, performs source-to-detector multiplexing. Such algorithm is highly optimized for computational efficiency and ambient noise rejection. Software-configurable input stages allow for flexibility in instrument setup. As a result of the specific correlation technique employed, the instrument is compact, lightweight and efficient. Clinical tests on oxygen consumption show excellent performance.

  14. A Remote Direct Sequence Spread Spectrum Communications Lab Utilising the Emona DATEx

    Directory of Open Access Journals (Sweden)

    Cosmas Mwikirize

    2012-12-01

    Full Text Available Remote labs have become popular learning aids due to their versatility and considerable ease of utilisation as compared to their physical counterparts. At Makerere University, the remote labs are based on the standard Massachusetts Institute of Technology (MIT iLabs Shared Architecture (ISA - a scalable and generic platform. Presented in this paper is such a lab, addressing the key practical aspects of Direct Sequence Spread Spectrum (DSSS communication. The lab is built on the National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS with the Emona Digital and Analog Telecommunications Experimenter (DATEx add-on board. It also incorporates switching hardware. The lab facilitates real-time control of the equipment, with users able to set, manipulate and observe signal parameters in both the frequency and the time domains. Simulation and data Acquisition modes of the experiment are supported to provide a richer learning experience.

  15. Non-Supervised Learning for Spread Spectrum Signal Pseudo-Noise Sequence Acquisition

    Institute of Scientific and Technical Information of China (English)

    Hao Cheng; Na Yu,; Tai-Jun Wang

    2015-01-01

    Abstract¾An idea of estimating the direct sequence spread spectrum (DSSS) signal pseudo-noise (PN) sequence is presented. Without the apriority knowledge about the DSSS signal in the non-cooperation condition, we propose a self-organizing feature map (SOFM) neural network algorithm to detect and identify the PN sequence. A non-supervised learning algorithm is proposed according the Kohonen rule in SOFM. The blind algorithm can also estimate the PN sequence in a low signal-to-noise (SNR) and computer simulation demonstrates that the algorithm is effective. Compared with the traditional correlation algorithm based on slip-correlation, the proposed algorithm’s bit error rate (BER) and complexity are lower.

  16. Reed Solomon Coding for Frequency Hopping Spread Spectrum in Jamming Environment

    Directory of Open Access Journals (Sweden)

    Othman Sidek

    2008-01-01

    Full Text Available Frequency hopping spread spectrum with noncoherent M-ary frequency shift keying system is considered. In this study Reed Solomon codes RS (255, 223 are employed in a standard error correction role to provide some Anti-Jamming (AJ capability with 8-bit symbols. Noise has been added to RS encoded data, which is demodulated at RS decoder perfectly. Matlab simulations have been implemented for numerical results. Graphical results have been plotted between the probability of an erasure versus ρ using RS (255, 223 code for 1 and 2 kHz frequencies. The simulation results have proved that system having RS (255, 223 code with M = 32 require substantially less signal to jammer power ratio to achieve the same bit error probability.

  17. Methods and apparatuses for self-generating fault-tolerant keys in spread-spectrum systems

    Energy Technology Data Exchange (ETDEWEB)

    Moradi, Hussein; Farhang, Behrouz; Subramanian, Vijayarangam

    2015-12-15

    Self-generating fault-tolerant keys for use in spread-spectrum systems are disclosed. At a communication device, beacon signals are received from another communication device and impulse responses are determined from the beacon signals. The impulse responses are circularly shifted to place a largest sample at a predefined position. The impulse responses are converted to a set of frequency responses in a frequency domain. The frequency responses are shuffled with a predetermined shuffle scheme to develop a set of shuffled frequency responses. A set of phase differences is determined as a difference between an angle of the frequency response and an angle of the shuffled frequency response at each element of the corresponding sets. Each phase difference is quantized to develop a set of secret-key quantized phases and a set of spreading codes is developed wherein each spreading code includes a corresponding phase of the set of secret-key quantized phases.

  18. Thermal signature identification system (TheSIS): a spread spectrum temperature cycling method

    Science.gov (United States)

    Merritt, Scott

    2015-03-01

    NASA GSFC's Thermal Signature Identification System (TheSIS) 1) measures the high order dynamic responses of optoelectronic components to direct sequence spread-spectrum temperature cycling, 2) estimates the parameters of multiple autoregressive moving average (ARMA) or other models the of the responses, 3) and selects the most appropriate model using the Akaike Information Criterion (AIC). Using the AIC-tested model and parameter vectors from TheSIS, one can 1) select high-performing components on a multivariate basis, i.e., with multivariate Figures of Merit (FOMs), 2) detect subtle reversible shifts in performance, and 3) investigate irreversible changes in component or subsystem performance, e.g. aging. We show examples of the TheSIS methodology for passive and active components and systems, e.g. fiber Bragg gratings (FBGs) and DFB lasers with coupled temperature control loops, respectively.

  19. Low-Power Direct-Sequence Spread-Spectrum Modem Architecture for Distributed Wireless Sensor Networks

    Energy Technology Data Exchange (ETDEWEB)

    Chien, C; Elgorriaga, I; McConaghy, C

    2001-07-03

    Emerging CMOS and MEMS technologies enable the implementation of a large number of wireless distributed microsensors that can be easily and rapidly deployed to form highly redundant, self-configuring, and ad hoc sensor networks. To facilitate ease of deployment, these sensors should operate on battery for extended periods of time. A particular challenge in maintaining extended battery lifetime lies in achieving communications with low power. This paper presents a direct-sequence spread-spectrum modem architecture that provides robust communications for wireless sensor networks while dissipating very low power. The modem architecture has been verified in an FPGA implementation that dissipates only 33 mW for both transmission and reception. The implementation can be easily mapped to an ASIC technology, with an estimated power performance of less than 1 mW.

  20. New detector for spread-spectrum based image watermarking using underdetermined ICA

    Science.gov (United States)

    Malik, Hafiz; Khokhar, Ashfaq; Ansari, Rashid

    2006-02-01

    This paper presents a novel scheme for detection of watermarks embedded in multimedia signals using spread spectrum (SS) techniques. The detection method is centered on using the model that the embedded watermark and the host signal are mutually independent. The proposed detector assumes that the host signal and the watermark obey non-Gaussian distributions. The proposed blind watermark detector employs underdetermined blind source separation (BSS) based on independent component analysis (ICA) for watermark estimation from the watermarked image. The mean-field theory based undetermined BSS scheme is used for watermark estimation. Analytical results are presented showing that the proposed detector performs significantly better than the existing correlation based blind detectors traditionally used for SS-based image watermarking.

  1. PROGRAM APLIKASI STEGANOGRAFI MENGGUNAKAN METODE SPREAD SPECTRUM PADA PERANGKAT MOBILE BERBASIS ANDROID

    Directory of Open Access Journals (Sweden)

    Rojali

    2012-12-01

    Full Text Available The exchange of traffic information in cyberspace grows fast. In all areas of life utilize technology to exchange information. One of the media owned by many people is mobile device such as mobile phone and tablet computer. In fact many people have been using mobile devices for information exchange function, and expect information to be transmitted quickly, accurately, and safely. The information security sent will be very important when the information is confidential. One way to secure information sent is the concealment of information into a media so that information hidden is beyond recognition by the human senses, which is commonly referred to steganography. This research studied and implemented steganography using spread spectrum Method on Android-based mobile devices. The results showed that the inserted image before and after the message was inserted is not different with PSNR value of about 75.

  2. Semi-Blind Error Resilient SLM for PAPR Reduction in OFDM Using Spread Spectrum Codes.

    Directory of Open Access Journals (Sweden)

    Amr M Elhelw

    Full Text Available High peak to average power ratio (PAPR is one of the major problems of OFDM systems. Selected mapping (SLM is a promising choice that can elegantly tackle this problem. Nevertheless, side information (SI index is required to be transmitted which reduces the overall throughput. This paper proposes a semi-blind error resilient SLM system that utilizes spread spectrum codes for embedding the SI index in the transmitted symbols. The codes are embedded in an innovative manner which does not increase the average energy per symbol. The use of such codes allows the correction of probable errors in the SI index detection. A new receiver, which does not require perfect channel state information (CSI for the detection of the SI index and has relatively low computational complexity, is proposed. Simulations results show that the proposed system performs well both in terms SI index detection error and bit error rate.

  3. Interference Excision in Spread Spectrum Communications Using Adaptive Positive Time-Frequency Analysis

    Directory of Open Access Journals (Sweden)

    Sridhar Krishnan

    2007-07-01

    Full Text Available This paper introduces a novel algorithm to excise single and multicomponent chirp-like interferences in direct sequence spread spectrum (DSSS communications. The excision algorithm consists of two stages: adaptive signal decomposition stage and directional element detection stage based on the Hough-Radon transform (HRT. Initially, the received spread spectrum signal is decomposed into its time-frequency (TF functions using an adaptive signal decomposition algorithm, and the resulting TF functions are mapped onto the TF plane. We then use a line detection algorithm based on the HRT that operates on the image of the TF plane and detects energy varying directional elements that satisfy a parametric constraint. Interference is modeled by reconstructing the corresponding TF functions detected by the HRT, and subtracted from the received signal. The proposed technique has two main advantages: (i it localizes the interferences on the TF plane with no cross-terms, thus facilitating simple filtering techniques based on thresholding of the TF functions, and is an efficient way to excise the interference; (ii it can be used for the detection of any directional interferences that can be parameterized. Simulation results with synthetic models have shown successful performance with linear and quadratic chirp interferences for single and multicomponent interference cases. The proposed method excises the interference even under very low SNR conditions of −10 dB, and the technique could be easily extended to any interferences that could be represented by a parametric equation in the TF plane.

  4. THE SCHEME STUDY OF THE APPLICATION OF W-CDMA SPREAD SPECTRUM COMMUNICATION IN MINE MOBILE COMMUNICATION

    Institute of Scientific and Technical Information of China (English)

    杨维; 程时昕; 孙继平

    2000-01-01

    For the purpose of making the best use of the mine frequency resource and realizing the instruction idea “to exchange bandwidth for distance" a W-CDMA mine spread spectrum mobile communication scheme based on spread spectrum communication technique and the propagation characteristic of electromagnetic wave along laneways is proposed.The structure and make up of the system are studied and the working frequency and channels are assigned.Analysis indicates the scheme is a simple one that can fulfill the mine saying requirement.

  5. Delayed P100-Like Latencies in Multiple Sclerosis: A Preliminary Investigation Using Visual Evoked Spread Spectrum Analysis.

    Directory of Open Access Journals (Sweden)

    Hanni S M Kiiski

    Full Text Available Conduction along the optic nerve is often slowed in multiple sclerosis (MS. This is typically assessed by measuring the latency of the P100 component of the Visual Evoked Potential (VEP using electroencephalography. The Visual Evoked Spread Spectrum Analysis (VESPA method, which involves modulating the contrast of a continuous visual stimulus over time, can produce a visually evoked response analogous to the P100 but with a higher signal-to-noise ratio and potentially higher sensitivity to individual differences in comparison to the VEP. The main objective of the study was to conduct a preliminary investigation into the utility of the VESPA method for probing and monitoring visual dysfunction in multiple sclerosis. The latencies and amplitudes of the P100-like VESPA component were compared between healthy controls and multiple sclerosis patients, and multiple sclerosis subgroups. The P100-like VESPA component activations were examined at baseline and over a 3-year period. The study included 43 multiple sclerosis patients (23 relapsing-remitting MS, 20 secondary-progressive MS and 42 healthy controls who completed the VESPA at baseline. The follow-up sessions were conducted 12 months after baseline with 24 MS patients (15 relapsing-remitting MS, 9 secondary-progressive MS and 23 controls, and again at 24 months post-baseline with 19 MS patients (13 relapsing-remitting MS, 6 secondary-progressive MS and 14 controls. The results showed P100-like VESPA latencies to be delayed in multiple sclerosis compared to healthy controls over the 24-month period. Secondary-progressive MS patients had most pronounced delay in P100-like VESPA latency relative to relapsing-remitting MS and controls. There were no longitudinal P100-like VESPA response differences. These findings suggest that the VESPA method is a reproducible electrophysiological method that may have potential utility in the assessment of visual dysfunction in multiple sclerosis.

  6. Delayed P100-Like Latencies in Multiple Sclerosis: A Preliminary Investigation Using Visual Evoked Spread Spectrum Analysis

    Science.gov (United States)

    Kiiski, Hanni S. M.; Ní Riada, Sinéad; Lalor, Edmund C.; Gonçalves, Nuno R.; Nolan, Hugh; Whelan, Robert; Lonergan, Róisín; Kelly, Siobhán; O'Brien, Marie Claire; Kinsella, Katie; Bramham, Jessica; Burke, Teresa; Ó Donnchadha, Seán; Hutchinson, Michael; Tubridy, Niall; Reilly, Richard B.

    2016-01-01

    Conduction along the optic nerve is often slowed in multiple sclerosis (MS). This is typically assessed by measuring the latency of the P100 component of the Visual Evoked Potential (VEP) using electroencephalography. The Visual Evoked Spread Spectrum Analysis (VESPA) method, which involves modulating the contrast of a continuous visual stimulus over time, can produce a visually evoked response analogous to the P100 but with a higher signal-to-noise ratio and potentially higher sensitivity to individual differences in comparison to the VEP. The main objective of the study was to conduct a preliminary investigation into the utility of the VESPA method for probing and monitoring visual dysfunction in multiple sclerosis. The latencies and amplitudes of the P100-like VESPA component were compared between healthy controls and multiple sclerosis patients, and multiple sclerosis subgroups. The P100-like VESPA component activations were examined at baseline and over a 3-year period. The study included 43 multiple sclerosis patients (23 relapsing-remitting MS, 20 secondary-progressive MS) and 42 healthy controls who completed the VESPA at baseline. The follow-up sessions were conducted 12 months after baseline with 24 MS patients (15 relapsing-remitting MS, 9 secondary-progressive MS) and 23 controls, and again at 24 months post-baseline with 19 MS patients (13 relapsing-remitting MS, 6 secondary-progressive MS) and 14 controls. The results showed P100-like VESPA latencies to be delayed in multiple sclerosis compared to healthy controls over the 24-month period. Secondary-progressive MS patients had most pronounced delay in P100-like VESPA latency relative to relapsing-remitting MS and controls. There were no longitudinal P100-like VESPA response differences. These findings suggest that the VESPA method is a reproducible electrophysiological method that may have potential utility in the assessment of visual dysfunction in multiple sclerosis. PMID:26726800

  7. 多径分量噪声干扰下无线电扩频通信优化技术%Optimization of radio spread spectrum communication under multipath component noise interference

    Institute of Scientific and Technical Information of China (English)

    邸珩烨

    2016-01-01

    The radio spread spectrum communication is subjected to the interference of the multipath component noise, which leads to the poor communication channel equalization, the ability of anti interference is not strong, and the bit error rate is high. Noise interference suppression is needed to improve the quality of radio spread spectrum communication. An optimization technique of radio spread spectrum communication based on adaptive cascade notch and inter symbol interference suppression is proposed in the paper. The paper presents the construction of radio spread spectrum communication system transmission structure model, and selects an adaptive notch filter to decrease the noise of the spread spectrum radio multipath components, which reduces the signal access to in band interference power, improves the demodulator output signal⁃to⁃noise ratio and signal to stem ratio. With the expansion of the sequence to modulate the carrier, the signal is moved to the carrier frequency, furthermore channel equalization is realized , and anti⁃interference ability is improved. Simulation results show that the proposed algorithm can effectively reduce the bit error rate of spread spectrum communication, and improve the communication quality.%无线电扩频通信受到多径分量噪声的干扰,导致通信信道均衡性不好,抗干扰能力不强,误码率较高。需要进行噪声干扰抑制,改善无线电扩频通信质量。提出一种基于自适应级联陷波和码间干扰抑制的无线电扩频通信优化技术。构建无线电扩频通信系统传输结构模型,采用自适应陷波器对无线电扩频通信中的多径分量噪声进行有效抑制,降低了进入信号通频带内的干扰功率,提高解调器的输出信噪比和信干比。采用扩展后的序列去调制载波,将信号搬移到载频上,实现信道均衡,提高抗干扰能力。仿真结果表明,该算法能有效降低无线电扩频

  8. Research on Modulation Strategies Based on Multilevel Inverter Universal Hybrid Topology

    Institute of Scientific and Technical Information of China (English)

    Zhou Jinghua; Su Yanmin; Shen Chuanwen; Zhang Lin

    2005-01-01

    Based on multi-module-cascaded inverter topology, this study presented a universal multilevel inverter hybrid topology and unified the researches on multilevel inverter topology. According to the freedom of this universal topology, several new hybrid topologies were constructed. Also, based on conventional modulation strategies- multi-carrier SPWM (Sinusoidal Pulse Width Modulation), hybrid modulation strategies were introduced corresponding to hybrid topologies, and a multilevel SVPWM (Space Vector Pulse Width Modulation) technique based on phase-shifted theory was naturally produced. Simulation and experiment results prove that hybrid topologies and corresponding modulation strategies are valid, which lay a foundation for practical application of hybrid multilevel inverter topologies.

  9. Flexible digital signal processing architecture for narrowband and spread-spectrum lock-in detection in multiphoton microscopy and time-resolved spectroscopy.

    Science.gov (United States)

    Wilson, Jesse W; Park, Jong Kang; Warren, Warren S; Fischer, Martin C

    2015-03-01

    The lock-in amplifier is a critical component in many different types of experiments, because of its ability to reduce spurious or environmental noise components by restricting detection to a single frequency and phase. One example application is pump-probe microscopy, a multiphoton technique that leverages excited-state dynamics for imaging contrast. With this application in mind, we present here the design and implementation of a high-speed lock-in amplifier on the field-programmable gate array (FPGA) coprocessor of a data acquisition board. The most important advantage is the inherent ability to filter signals based on more complex modulation patterns. As an example, we use the flexibility of the FPGA approach to enable a novel pump-probe detection scheme based on spread-spectrum communications techniques.

  10. Correlation analysis for spread-spectrum induced-polarization signal processing in electromagnetically noisy environments

    DEFF Research Database (Denmark)

    Liu, Weiqiang; Chen, Rujun; Cai, Hongzhu

    2017-01-01

    In induced-polarization (IP) surveys, the raw data are usually distorted significantly by the presence of electromagnetic (EM) interferences, including cultural noise. Several methods have been proposed to improve the signal-to-noise ratio of these data. However, signal processing in an electroma......In induced-polarization (IP) surveys, the raw data are usually distorted significantly by the presence of electromagnetic (EM) interferences, including cultural noise. Several methods have been proposed to improve the signal-to-noise ratio of these data. However, signal processing...... in an electromagnetically noisy environment is still a challenging problem. We have determined a new and simple technique based on the analysis of the correlation between the measured potential and the injected primary current signals. This processing is applied to the data acquired using a new frequency-domain IP method...... called the spread-spectrum induced-polarization (SSIP) approach. In this approach, we use a pseudorandom m-sequence (also called the maximum length sequence) for the injected primary current. One of the advantages of this sequence is to be essentially spectrally flat in a given frequency range. Therefore...

  11. Spread spectrum image data hiding in the encrypted discrete cosine transform coefficients

    Science.gov (United States)

    Zhang, Xiaoqiang; Wang, Z. Jane

    2013-10-01

    Digital watermarking and data hiding are important tools for digital rights protection of media data. Spread spectrum (SS)-based watermarking and data-hiding approaches are popular due to their outstanding robustness, but their security might not be sufficient. To improve the security of SS, a SS-based image data-hiding approach is proposed by encrypting the discrete cosine transform coefficients of the host image with the piecewise linear chaotic map, before the operation of watermark embedding. To evaluate the performance of the proposed approach, simulations and analyses of its robustness and security are carried out. The average bit-error-rate values on 100 real images from the Berkeley segmentation dataset under the JPEG compression, additive Gaussian noise, salt and pepper noise, and cropping attacks are reported. Experimental results show that the proposed approach can maintain the high robustness of traditional SS schemes and, meanwhile, also improve the security. The proposed approach can extend the key space of traditional SS schemes from 10 to 10 and thus can resist brute-force attack and unauthorized detection watermark attack.

  12. Resource Allocation with Adaptive Spread Spectrum OFDM Using 2D Spreading for Power Line Communications

    Directory of Open Access Journals (Sweden)

    Baudais Jean-Yves

    2007-01-01

    Full Text Available Bit-loading techniques based on orthogonal frequency division mutiplexing (OFDM are frequently used over wireline channels. In the power line context, channel state information can reasonably be obtained at both transmitter and receiver sides, and adaptive loading can advantageously be carried out. In this paper, we propose to apply loading principles to an spread spectrum OFDM (SS-OFDM waveform which is a multicarrier system using 2D spreading in the time and frequency domains. The presented algorithm handles the subcarriers, spreading codes, bits and energies assignment in order to maximize the data rate and the range of the communication system. The optimization is realized at a target symbol error rate and under spectral mask constraint as usually imposed. The analytical study shows that the merging principle realized by the spreading code improves the rate and the range of the discrete multitone (DMT system in single and multiuser contexts. Simulations have been run over measured power line communication (PLC channel responses and highlight that the proposed system is all the more interesting than the received signal-to-noise ratio (SNR is low.

  13. A Study on the Security Levels of Spread-Spectrum Embedding Schemes in the WOA Framework.

    Science.gov (United States)

    Wang, Yuan-Gen; Zhu, Guopu; Kwong, Sam; Shi, Yun-Qing

    2017-08-23

    Security analysis is a very important issue for digital watermarking. Several years ago, according to Kerckhoffs' principle, the famous four security levels, namely insecurity, key security, subspace security, and stego-security, were defined for spread-spectrum (SS) embedding schemes in the framework of watermarked-only attack. However, up to now there has been little application of the definition of these security levels to the theoretical analysis of the security of SS embedding schemes, due to the difficulty of the theoretical analysis. In this paper, based on the security definition, we present a theoretical analysis to evaluate the security levels of five typical SS embedding schemes, which are the classical SS, the improved SS (ISS), the circular extension of ISS, the nonrobust and robust natural watermarking, respectively. The theoretical analysis of these typical SS schemes are successfully performed by taking advantage of the convolution of probability distributions to derive the probabilistic models of watermarked signals. Moreover, simulations are conducted to illustrate and validate our theoretical analysis. We believe that the theoretical and practical analysis presented in this paper can bridge the gap between the definition of the four security levels and its application to the theoretical analysis of SS embedding schemes.

  14. Spread Spectrum Based Energy Efficient Collaborative Communication in Wireless Sensor Networks.

    Science.gov (United States)

    Ghani, Anwar; Naqvi, Husnain; Sher, Muhammad; Khan, Muazzam Ali; Khan, Imran; Irshad, Azeem

    2016-01-01

    Wireless sensor networks consist of resource limited devices. Most crucial of these resources is battery life, as in most applications like battle field or volcanic area monitoring, it is often impossible to replace or recharge the power source. This article presents an energy efficient collaborative communication system based on spread spectrum to achieve energy efficiency as well as immunity against jamming, natural interference, noise suppression and universal frequency reuse. Performance of the proposed system is evaluated using the received signal power, bit error rate (BER) and energy consumption. The results show a direct proportionality between the power gain and the number of collaborative nodes as well as BER and signal-to-noise ratio (Eb/N0). The analytical and simulation results of the proposed system are compared with SISO system. The comparison reveals that SISO perform better than collaborative communication in case of small distances whereas collaborative communication performs better than SISO in case of long distances. On the basis of these results it is safe to conclude that collaborative communication in wireless sensor networks using wideband systems improves the life time of nodes in the networks thereby prolonging the network's life time.

  15. Mechanical Modulation of Hybrid Graphene Microfiber Structure

    CERN Document Server

    Xu, Fei; Lu, Yan-qing

    2015-01-01

    Recently, the strain engineering of two-dimensional materials such as graphene has attracted considerable attention for its great potential in functional nanodevices. Here, we theoretically and experimentally investigate the strain manipulation of a graphene-integrated microfiber system for the first time. We analyze the influential factors of strain tuning, i.e., the geometrical parameters of the microfiber, the strain magnitude, and the probe-light wavelength. Moreover, we experimentally achieve in-line modulation as high as 30% with a moderate strain of ~5%, which is two orders of magnitude larger than previous results. The dynamic vibration response is also researched. The broadband, polarization-independent, cost-effective, strain-based modulator may find applications in low-speed modulation and strain sensing. Further, we believe that our platform may allow for all-in fiber engineering of graphene-analogue materials and provide new ideas for graphene-integrated flexible device design.

  16. Conceptual Design for Permutation Coding with Direct Chaotic Sequence Spread Spectrum%一类直接混沌序列扩频通信置换编码方案

    Institute of Scientific and Technical Information of China (English)

    尹波; 周学广

    2015-01-01

    直接序列扩频通信需要大线性复杂度的序列用作扩频调制码,混沌序列可以胜任。为实现一类扩频通信编码方案,提出基于“天书”模型的混沌序列发生器,对其进行了置换编码,随后分析了置换编码的保密强度,最后给出了该编码的应用途径和理由。%Chaotic sequence could be competent for the need of very large linear complexity sequence ,which modulated for spread spectrum for Direct Sequence Spread Spectrum (DSSS) .Firstly a skytale‐based chaotic sequence generator was proposed ,and spread spectrum communication was encoded with permutation ,then the security level of permutation coding was analyzed .At last ,the application and account was provided for the new chaotic coding design .

  17. Integration of hybrid silicon lasers and electroabsorption modulators.

    Science.gov (United States)

    Sysak, Matthew N; Anthes, Joel O; Bowers, John E; Raday, Omri; Jones, Richard

    2008-08-18

    We present an integration platform based on quantum well intermixing for multi-section hybrid silicon lasers and electroabsorption modulators. As a demonstration of the technology, we have fabricated discrete sampled grating DBR lasers and sampled grating DBR lasers integrated with InGaAsP/InP electroabsorption modulators. The integrated sampled grating DBR laser-modulators use the as-grown III-V bandgap for optical gain, a 50 nm blue shifted bandgap for the electrabosprtion modulators, and an 80 nm blue shifted bandgap for low loss mirrors. Laser continuous wave operation up to 45 ?C is achieved with output power >1.0 mW and threshold current of 2GHz with 5 dB DC extinction.

  18. An improved hypothesis-feedback equalization algorithm for multicode direct-sequence spread-spectrum underwater communications

    Institute of Scientific and Technical Information of China (English)

    HAN Jing; HUANG Jianguo; SHEN Xiaohong; WANG Yu

    2007-01-01

    In underwater acoustic communication,because the available bandwidth of the channel is severely limited,the direct-sequence spread-spectrum scheme can only be realized at low bit rates.To improve the transmission speed,a multicode spread-spectrum scheme is considered.However,in this case,due to the rapid time-variability of the underwater channel,and the influence of inter-symbol interference(ISI)and inter-channel interference(ICI),the conventional rake receiver may fail to function.The hypothesis-feedback equalization algorithm has been proposed for the direct-sequence spread-spectrum system[1].By updating coefficients at chip rate and feeding back hypothesized chips,it can track time-variability and combat ISI effectively.However,for a multicode system,its performance will be degraded bv ICI.An improved algorithm is proposed in this paper,which combines parallel interference cancellation(PIC)with hypothesis-feedback equalization(HFE),with the capabilities of tracking the time-varying channel and suppressing the ISI and ICI at the same time.Simulation results prove that the proposed algorithm can significantly improve the performance of a multicode system.

  19. Hybrid-Circuit Module For Dc-To-Dc Power Converter

    Science.gov (United States)

    Vorperian, Vatche; Detwiler, Robert; Karmon, Dan

    1996-01-01

    Power hybrid module is general-purpose power-switching module providing flexibility in design and application. Complete dc-to-dc power converter constructed by adding input/output filters and feedback circuitry to module to suit specific application.

  20. FHSS DSSS And Hybrid DSFH Performance Evaluation For VSAT

    Directory of Open Access Journals (Sweden)

    Lina E. Alatabani

    2015-08-01

    Full Text Available Abstract The performance of any radio communication system is affected by several factors such as interference and jamming caused by some other parallel networks for the purpose of decreasing the performance of a given system. Direct Sequence Spread Spectrum DSSS Frequency Hopping Spread Spectrum FHSS and a hybrid approach of both techniques DSFH are proposed to solve the problem. Whereas DSSS generates a sequence of bit and sends them over a fixed data rate and spread the spectrum with a spreading sequence FHSS send the data into different channels with variable data rates and the hybrid DSFH approach takes advantage of DSSS and uses it in multiple channels. Various modulation techniques which are suitable for Very small aperture terminal VSAT were simulated with each of the mentioned approaches such as Phase Ship Keying PSK Frequency Shift Keying FSK and Quadrature Amplitude Modulation QAM to in order to work properly with each technique. The performance of each approach was evaluated in terms of Signal to Noise Ratio vs Bit Error Rate throughput delay and datarate. The results are very close to each other in terms of BER but the best approach was the DSSS. The Hybrid DSFH needs more power to operate so it best fits the applications with high frequencies. The Hybrid DSFH approach was the best of the three tested approaches in terms of throughput delay and datarate. The FHSS technique was average in all the parameters and had greater delay time due to the delay gap in the hopping process.

  1. Design of direct sequence spread spectrum communication system based on Simulink%基于Simulink的直接序列扩频通信系统仿真设计

    Institute of Scientific and Technical Information of China (English)

    马小青

    2014-01-01

    The visual simulation tool Simulink provided by Matlab is used to build a simulation model of direct sequence spread spectrum communication system. The simulation design of transmitter module and receiver module of direct sequence spread spectrum communication system was carried out with Simulink. The relationship among BER,SNR and spreading gain of DSSS system was researched by means of every waveform and spectrum transformation diagram in the transmission process. The simulation model was tested under the given simulation conditions. The results show that the system has high SNR,good perfor-mance and constant bit error rate;and the signal-to-noise ratio at the output end can be improved if the spread gain of the direct sequence spread spectrum communication systems is increased.%以Matlab提供的可视化仿真工具Simulink搭建直接序列扩频通系统仿真模型,利用Simulink对直接序列扩频通系统的发射机模块和接收机模块进行仿真设计,通过传输过程中各个波形和频谱变换图,研究直扩系统误码率、信噪比和扩频增益的关系。在给定的仿真条件下,运行测试仿真模型,结果表明,该系统信噪比较高,性能较好,且在误码率保持不变的情况下,增加直扩通信系统的扩频增益可以增加输出端的信噪比。

  2. DSBCS modulation scheme for hybrid wireless and cable television system.

    Science.gov (United States)

    Peng, P C; Wang, H Y; Chang, C H; Hu, H L; Yang, W Y; Wu, F K

    2014-01-13

    This work develops and demonstrates a double sideband with optical carrier suppression (DSBCS) modulation scheme for a hybrid wireless and cable television system based on a phase modulator (PM) and a polarization beam splitter (PBS). A carrier suppression ratio greater than 20 dB is achieved between two sidebands. In addition, the values of carrier-to-noise ratio, composite second-order and composite triple beat in various channels after 25 km of transmission are higher than the threshold value, and the power penalty of microwave signal in back-to-back and 25 km transmission perform well. Additionally, the constellation diagram of upstream signal is successfully recovered. Above results demonstrate that the proposed scheme is highly promising for practical applications.

  3. 基于FPGA的扩频信号发生器的研究与设计%Study and Design of Spread-Spectrum Signal Generator Based on FPGA

    Institute of Scientific and Technical Information of China (English)

    王茂林; 杨合圣

    2012-01-01

    扩频通信技术具有抗干扰,抗多径,保密性好,不易被截获以及可以实现码分多址等优点。信号发生器是一种十分重要的仪器,在通信、测控、导航、雷达、医疗等领域有着广泛的应用。文章以直接频率合成和伪随机码的设计与实现为中心,对扩频通信的基本理论,载波调制等问题进行分析与研究。%Spread-spectrum communication has many advantages such as anti-jamming,anti-multipath,confidentiality,difficult to be intercepted,code division and multiple access,and so on.Signal generator is so important a device that it is applied to communication,monitoring and control,navigation,radar,medical and other abroad fields.In this paper,the design and achievement of direct digital frequency synthesize and pseudo-random code is central work,with basic theory of spread-spectrum communication and carrier modulation analyzed and studied.

  4. Application of Near-field intra-body communication and spread spectrum technique to vital-sign monitor.

    Science.gov (United States)

    Kobayashi, Takumi; Shimatani, Yuichi; Kyoso, Masaki

    2012-01-01

    As a novel vital sign monitor, we have developed wireless ECG monitoring system with Near-field intra-body communication technique. However, communication reliability is not so high because transmission channel is noisy and unstable. In order to improve the problem, we utilize spread spectrum (SS), which is known as robust communication technique even through poor transmission channel. First of all, we evaluated characteristics of human body to SS signal. The results show that SS can be used even through human body. Based on this result, we developed and tested near-field intra-body communication device enhanced by SS. The test result shows that SS can solve the problem mentioned above.

  5. New high performance SAW convolvers used in high bit rate and wideband spread spectrum CDMA communications system.

    Science.gov (United States)

    Hikita, M; Takubo, C; Asai, K

    2000-01-01

    New surface acoustic wave (SAW) convolver structures with high conversion efficiency and self-temperature compensation characteristics have been developed. Strong piezoelectric substrates, regardless of temperature coefficients of delay (TCD), can be used in these convolvers. New demodulation techniques using the developed SAW convolver for high bit rate and wideband spread spectrum code division multiple access (CDMA) communications have also been developed. I- and Q-channel demodulation data can be derived directly from binary phase shift keying (BPSK) or quadri-phase shift keying (QPSK) CDMA signals. In an experiment using a 128 degrees YX-LiNbO(3) substrate, CDMA signals of 9 Mbps (megabits per second) with 60 Mcps (megachips per second) spread by 13-chip Barker code and 11 Mbps with 140 Mcps spread by 25-chip Shiba's code were clearly demodulated, demonstrating the effectiveness of these techniques for use in future CDMA communications.

  6. Spread spectrum communication based on hardware encryption%硬件加密的扩频通信方案

    Institute of Scientific and Technical Information of China (English)

    萧宝瑾; 仝海丽; 张建忠; 张朝霞; 王云才

    2011-01-01

    提出了一个利用混沌激光源产生1Gbit/s的随机序列作为扩频码的方案.理论分析表明,该随机序列克服了伪随机序列的周期性,在扩大扩频码容量的同时实现了扩频码可变,提高了通信安全性.利用Simulink软件对该扩频系统进行仿真.结果表明,当信息速率一定时,扩频增益越大,误码率越低,与理论结果相符.与传统的扩频系统相比,该方案在提高系统抗干扰能力的同时也增强了保密性.%The scheme of 1 Gbit/s random sequence generated by chaotic laser as spreading code is proposed.Theoretical analysis indicates that the pseudo random sequence exhibited periodic behavior is eliminated by the random sequence and the capability of spreading code is enlarged.Meanwhile,the communication security can be improved by variable spreading code.The corresponding spread spectrum system is numerically simulated by Simulink software and the results demonstrate that the greater the used spreading gain,the lower the obtained error rate will be when the information speed is constant,which is consistent with the theoretical results.The anti-jamming ability of the spread spectrum system is strengthened and the security is enhanced compared with those of the traditional spreading system.

  7. CORA: A direct sequence spread spectrum radio for voice and data

    Science.gov (United States)

    Thorvaldsen, T.

    1989-12-01

    For many years the ordinary FM radio (e.g., the VRC 12 family) was the workhorse in military forces throughout the world. This type of radio has some advantages; it is relatively simple and cheap, it has a low power consumption as a man-pack, and an excellent voice quality. Since the modulation type and details are known by everyone, however, the messages are easily intercepted and even rebroadcasted in order to fool the enemy. Age is also becoming an important argument for introducing a new radio generation on the market. Radios operating in the military VHF band 30 to 88 MHz are discussed. The requirements for such a radio will of course vary from country to country. The most important requirements are given.

  8. M元码元移位键控扩频水声通信%M-ary code shift keying spread spectrum underwater acoustic communication

    Institute of Scientific and Technical Information of China (English)

    于洋; 周锋; 乔钢

    2012-01-01

    Aiming at the low data rate of traditional direct sequence spread spectrum, M-ary spread spectrum and code shift keying un- derwater acoustic spread spectrum communication, a new combine method of M-ary code shift keying underwater acoustic spread spectrum communication is proposed based on the small Kasami sequence with good self and mutual correlation. Different sequence information and the same sequence code phase information are used in this method. The influences of self and mutual correlation func- tion on M-ary code shift keying underwater acoustic spread spectrum communication over gaussian and fading channel are analyzed. The performances under the two kinds of channels are simulated. The simulation shows that the ability for M-ary code shift spread spectrum to overcome the noise is better than for the direct sequence spread spectrum, M-ary spread spectrum and code shift keying spread spectrum. The comparative experiment is conducted to compare the M-ary spread spectrum, code shift keying spread spectrum and M-ary code shift keying spread spectrum in the pool. The M-ary code shift keying communication rate of 256.3 bps with no transmitting error in 104 bit data volume is realized.%针对传统直接序列扩频、M元扩频和码元移位键控扩频水声通信速率低的问题,基于小Kasami序列优良的自相关和互相关特性,提出了M元扩频和码元移位键控扩频两者相结合的水声扩频通信新方法.不仅利用了不同的序列信息,还利用了相同序列的扩频码相位信息.对于白相关和互相关函数在加性高斯白噪声和衰落信道下对M元码元移位键控扩频这种水声通信方法的影响进行了分析,并分别在两种信道下对其性能进行仿真,仿真结果表明在同等通信速率下M元码元移位键控扩频的抗噪声能力要高于直接序列扩频、M元扩频和码元移位键控扩频.在水池对M元扩频、码元移位键控扩频和M元码元移位键

  9. Low-power silicon-organic hybrid (SOH) modulators for advanced modulation formats.

    Science.gov (United States)

    Lauermann, M; Palmer, R; Koeber, S; Schindler, P C; Korn, D; Wahlbrink, T; Bolten, J; Waldow, M; Elder, D L; Dalton, L R; Leuthold, J; Freude, W; Koos, C

    2014-12-01

    We demonstrate silicon-organic hybrid (SOH) electro-optic modulators that enable quadrature phase-shift keying (QPSK) and 16-state quadrature amplitude modulation (16QAM) with high signal quality and record-low energy consumption. SOH integration combines highly efficient electro-optic organic materials with conventional silicon-on-insulator (SOI) slot waveguides, and allows to overcome the intrinsic limitations of silicon as an optical integration platform. We demonstrate QPSK and 16QAM signaling at symbol rates of 28 GBd with peak-to-peak drive voltages of 0.6 V(pp). For the 16QAM experiment at 112 Gbit/s, we measure a bit-error ratio of 5.1 × 10⁻⁵ and a record-low energy consumption of only 19 fJ/bit.

  10. 基于Gold序列的直接扩频通信系统仿真%Simulation of Direct Spread Spectrum Communication System Based on Gold Sequence

    Institute of Scientific and Technical Information of China (English)

    李亚文

    2012-01-01

    The working principle of direct spread spectrum communication systemia analysed which is spreaded spectrum by Gold code sequence,and simulating this communicaton with Matlab/Simulink.By the experiment,it follows the complete process of spread spectrum communication.The result of simulation indicates that the Direct spread spectrum communication system base on Gold sequence has advantages of good performance of anti-interference and simple circuit,it can implementate users need of communication transmission and have the better reliability.%分析了直接序列扩频通信系统的工作原理,选用Gold序列作为扩频序列码,利用MATLAB/Simulink对直接扩频通信系统进行仿真,通过仿真实验,实时跟踪了扩频通信的完整过程。分析实验结果可知,基于Gold序列的直接扩频通信系统抗干扰性较好,电路实现简单,能实现用户通信传输的需要,并且可靠性较好。

  11. Hybrid multinary modulation codes for page-oriented holographic data storage

    Science.gov (United States)

    Berger, G.; Dietz, M.; Denz, C.

    2008-11-01

    Hybrid multinary block codes for implementation in page-oriented holographic storage systems are proposed. The codes utilize combined phase and amplitude modulations to encode input data. In comparison to pure amplitude-or pure phase-modulated block code designs hybrid multinary modulation coding allows us to augment the storage density at an unchanged error rate. Two different hybrid modulation code designs are introduced. Experimental implementation is thoroughly discussed, especially concentrating on readout concepts. Phase-resolved readout is accomplished by optical addition and subtraction, using an unmodulated reference page. Experimental results indicate that the overall error rate is usually dominated by errors related to amplitude detection. The study suggests that capacity gains of up to 31% or 47% are reasonable when utilizing phase modulations in conjunction with binary or ternary amplitude modulation.

  12. An Improved Solution for Chaotic Direct Spread Spectrum System%一种改进的混沌直扩方案

    Institute of Scientific and Technical Information of China (English)

    兰楷; 王亚涛

    2013-01-01

      直接序列扩频是低截获概率通信常用的通信技术。传统的扩频技术受到自身扩频码性能的限制,抗截获性能不高。近年来被广泛研究的混沌扩频技术能改善传统扩频通信的一些缺陷,但新的截获技术迫使我们寻找具有更高抗截获性能的通信技术。基于混沌扩频,提出了一种改进的直扩通信方案——变速混沌扩频,包括两种变速方法。通过仿真和分析,证明了变速混沌扩频适合于直扩通信系统。同时,理论分析表明,与传统混沌直扩系统相比,该方案具有更好的抗截获性能。%DSSS (Direct Sequence Spread Spectrum) is usually used as the communication technology for low-interception-probability communication. The traditional SS (Spread Spectrum) technology is limited by the PN code performance, and this would result in its poor anti-interception performance. Chaotic spread spectrum technology is extensively studied in recent years and and this technology could remedy some defects of the traditional spread spectrum. However the newly-occurred interception technology forces the people to look for a communication technology with better anti-intercept performance. A variable speed chaotic spread spectrum method based on chaotic spread spectrum and with two speed-varing ways is proposed. Simulation and analysis show that the variable speed chaotic spread spectrum sequences is applicable to DSSS system. The theoretical analysis indicates that this solution is of better LPI performance as compared with traditional chaotic DSSS system.

  13. Application and Estimation of LS Code in Underwater Acoustic Spread-spectrum Communication%LS码在水声扩频中的应用及估计

    Institute of Scientific and Technical Information of China (English)

    张帅; 高勇

    2013-01-01

    The further application of underwater acoustic spread-spectrum communication system is limited by multipath interference, so the choice of spread spectrum sequences with better performances can im-prove the anti-jamming performances of underwater acoustic spread spectrum system. Based on discussion of LS code properties, LS codes is proposed for underwater acoustic spread-spectrum communication ,and the superiority of its application also analyzed in this paper. Simulation on rayleigh channel model of un-derwater acoustic indicates good performances of the spread-spectrum communication based on LS code. With power- spectrum processing and singular value decomposition, the spread spectrum sequence of un-derwater acoustic spread-spectrum signal based on LS code is estimated. The simulation results shows that with this method,the LS code can be estimated correctly in the condition of SNR=-11 dB.%水声多径干扰限制了水声直接扩频通信系统的进一步应用,选取性能更好的扩频序列可以提高水声扩频系统的抗干扰性能。在讨论了LS码特性的基础上,提出了将LS码应用于水声直接扩频通信中,并分析了LS码应用的优势。通过多径瑞利水声信道模型仿真,验证了LS码水声扩频通信的良好性能。利用了二次谱和奇异值分解的方法对LS码水声直扩信号的扩频序列进行了估计。仿真结果表明,该方法在信噪比为-11 dB 时还能准确的估计出LS码。

  14. Breaking a chaotic direct sequence spread spectrum communication system using interacting multiple model-unscented Kalman filter.

    Science.gov (United States)

    Lu, Gan; Bo, Xiong

    2012-12-01

    In this paper, a new method to break chaotic direct sequence spread spectrum (CD3S) communication systems is proposed. Here, the CD3S communication system transmitting different information symbols is considered as a combination of two subsystems which are driven by two different chaotic dynamic models, respectively. At every single time moment, the CD3S signal can be regarded as generated by the subsystem corresponding to the information symbol transmitted. Then, based on the multiple model form of CD3S signals, an interacting multiple model unscented Kalman filter with model switching detection mechanism is exploited to track the CD3S signals. The l(2)-norm of tracking errors is used to choose the model which best matches the intercepted signals. Thus, the information symbols are recovered indirectly. Compared with the existing methods, the proposed algorithm can: (1) reduce the influence of a low spreading factor; (2) calculate the spreading factor using the length of time intervals between model switching; and (3) be more effective under scenarios of low signal-to-noise ratio or multipath fading. Simulation results verify the superiority of the proposed method.

  15. Design of a TDOA location engine and development of a location system based on chirp spread spectrum.

    Science.gov (United States)

    Wang, Rui-Rong; Yu, Xiao-Qing; Zheng, Shu-Wang; Ye, Yang

    2016-01-01

    Location based services (LBS) provided by wireless sensor networks have garnered a great deal of attention from researchers and developers in recent years. Chirp spread spectrum (CSS) signaling formatting with time difference of arrival (TDOA) ranging technology is an effective LBS technique in regards to positioning accuracy, cost, and power consumption. The design and implementation of the location engine and location management based on TDOA location algorithms were the focus of this study; as the core of the system, the location engine was designed as a series of location algorithms and smoothing algorithms. To enhance the location accuracy, a Kalman filter algorithm and moving weighted average technique were respectively applied to smooth the TDOA range measurements and location results, which are calculated by the cooperation of a Kalman TDOA algorithm and a Taylor TDOA algorithm. The location management server, the information center of the system, was designed with Data Server and Mclient. To evaluate the performance of the location algorithms and the stability of the system software, we used a Nanotron nanoLOC Development Kit 3.0 to conduct indoor and outdoor location experiments. The results indicated that the location system runs stably with high accuracy at absolute error below 0.6 m.

  16. A Method to Assign Spread Codes Based on Passive RFID Communication for Energy Harvesting Wireless Sensors Using Spread Spectrum Transmission

    Directory of Open Access Journals (Sweden)

    Ken Takahashi

    2015-08-01

    Full Text Available Considerable research has been conducted on systems that collect real-world information by using numerous energy harvesting wireless sensors. The sensors need to be tiny, cheap, and consume ultra-low energy. However, such sensors have some functional limits, including being restricted to wireless communication transmission. Therefore, when more than one sensor simultaneously transmits information in these systems, the receiver may not be able to demodulate if the sensors cannot accommodate multiple access. To solve this problem, a number of proposals have been made based on spread spectrum technologies for resistance to interference. In this paper, we point out some problems regarding the application of such sensors, and explain the assumption of spread codes assignment based on passive radio frequency identification (RFID communication. During the spread codes assignment, the system cannot work. Hence, efficient assignment method is more appropriate. We consider two assignment methods and assessed them in terms of total assignment time through an experiment. The results show the total assignment time in case of Electronic Product Code (EPC Global Class-1 Generation-2 which is an international standard for wireless protocols and the relationship between the ratio of the time taken by the read/write command and the ratio of total assignment time by the two methods. This implies that more efficient methods are obtained by considering the time ratio of read/write command.

  17. 抑制扩频系统中窄带干扰的新卡尔曼滤波算法%New Kalman Filtering Algorithm for Narrowband Interference Suppression in Spread Spectrum Systems

    Institute of Scientific and Technical Information of China (English)

    许光辉; 胡光锐

    2005-01-01

    A new Kalman filtering algorithm based on estimation of spread spectrum signal before suppression of narrowband interference (NBI) in spread spectrum systems, using the dependence of autoregressive (AR) interference, is presented compared with performance of the ACM nonlinear filtering algorithm, simulation results show that the proposed algorithm has preferable performance, there is about 5 dB SNR improvement in average.

  18. Development of Hybrid Courses Utilizing Modules as an Objective in ATE Projects

    Science.gov (United States)

    Payne, James E.; Murphy, Richard M.; Payne, Linda L.

    2017-01-01

    Orangeburg-Calhoun Technical College (OCtech) has been awarded two National Science Foundation Advanced Technological Education (NSF-ATE) grants since 2011 that have the development of module-based hybrid courses in Engineering Technology and Mechatronics as objectives. In this article, the advantages and challenges associated with module-based…

  19. 40 Gbit/s silicon-organic hybrid (SOH) phase modulator

    OpenAIRE

    Alloatti L.; Korn D.; Hillerkuss D.; Vallaitis T.; Li J; Bonk R.; Palmer R.; Schellinger T.; Barklund A.; Dinu R.

    2010-01-01

    A 40 Gbit/s electro-optic modulator is demonstrated. The modulator is based on a slotted silicon waveguide filled with an organic material. The silicon organic hybrid (SOH) approach allows combining highly nonlinear electro-optic organic materials with CMOS-compatible silicon photonics technology.

  20. Development of a new lower hybrid antenna module using a poloidal power divider

    Energy Technology Data Exchange (ETDEWEB)

    Maebara, S.; Imai, T.; Seki, M.; Suganuma, K. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Goniche, M.; Bibet, Ph.; Berio, S.; Brossaud, J.; Rey, G.; Tonon, G. [Association Euratom-CEA, Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    1997-03-01

    A realistic antenna module using a poloidal divider for lower hybrid current drive (LHCD) experiment, is modelled and fabricated. In this antenna module test II, three types of poloidal dividers, which split the power in 3, are tested. (author). 15 refs.

  1. Hybrid Asymmetric Space Vector Modulation for inverter based direct torque control induction motor drive

    Directory of Open Access Journals (Sweden)

    Nandakumar Sundararaju

    2014-05-01

    Full Text Available This paper proposes novel hybrid asymmetric space vector modulation technique for inverter operated direct torque control induction motor drive. The hybridization process is performed by the combination of continuous asymmetric space vector modulation pulse width technique (ASVPWM and fuzzy operated discontinuous ASVPWM technique. Combination process is based on pulse mismatching technique. Pulse mismatching technique helps to reduce the active region of the switch. Finally, optimal pulses are applied to control the inverter. The optimal hybrid pulse condense switching losses of the inverter and also improves the operating performance of the direct torque control (DTC based drive system like smooth dynamic response in speed reversal, minimum torque error, settling time of speed. Simulation results of proposed hybrid asymmetric space vector pulse width modulation technique to direct torque control (HASVPWM-DTC approach has been carried out by using Matlab-Simulink environment.

  2. PDM-DPSK-MPPM hybrid modulation for multi-hop free-space optical communication

    Science.gov (United States)

    Wang, Zhuo; Shi, Wen-xiao; Wu, Peng-xia

    2016-11-01

    A hybrid polarization division multiplexed-differential phase shift keying-multipulse pulse position modulation (PDM-DPSK-MPPM) scheme for multi-hop free-space optical (FSO) communication is investigated. The analytical bit error rate ( BER) of the proposed system in Gamma-Gamma turbulence channels is derived and verified using computer simulation. The results show that both multi-hop and hybrid modulation schemes are efficient techniques to improve the performance of FSO links. Compared with the traditional binary phase shift keying (BPSK) and MPPM, the hybrid scheme can improve the bandwidth-utilization efficiency and reliability of the system. Compared with the coherent demodulation of PDM-QPSK-MPPM, the system complexity is reduced at the cost of the degradation of BER performance, which can improve the practicality of hybrid modulation technology in FSO system.

  3. AEROSTATIC AND AERODYNAMIC MODULES OF A HYBRID BUOYANT AIRCRAFT: AN ANALYTICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Anwar Ul Haque

    2015-05-01

    Full Text Available An analytical approach is essential for the estimation of the requirements of aerodynamic and aerostatic lift for a hybrid buoyant aircraft. Such aircrafts have two different modules to balance the weight of aircraft; aerostatic module and aerodynamic module. Both these modules are to be treated separately for estimation of the mass budget of propulsion systems and required power. In the present work, existing relationships of aircraft and airship are reviewed for its further application for these modules. Limitations of such relationships are also disussed and it is precieved that it will provide a strating point for better understanding of design anatomy of such aircraft.

  4. Hybrid M-FSK/DQPSK Modulations for CubeSat Picosatellites

    Directory of Open Access Journals (Sweden)

    I. Vertat

    2013-04-01

    Full Text Available Conventional CubeSat radio systems typically use one of several basic modulations, such as AFSK, GMSK, BPSK, QPSK and OOK or switch between them on demand if possible. These modulations represent a bal¬anced trade-off between good energy efficiency of high order M-FSK modulation and good spectral efficiency of high order M-QAM modulation. Utilization of modulations with the best energy efficiency is not possible due to strict limits on occupied frequency bandwidth. In this paper the proposed group of hybrid modulations and proposed hybrid modulator and demodulator are presented. Novel solution offer interesting possibilities of increasing spectral efficiency as well as energy efficiency of basic M-FSK modulation by embedding DQPSK symbols between two M-FSK symbols. Such group of hybrid modulations offers suitable properties for picosatellite, e.g. simple realization onboard the picosatellite, better energy and spectral efficiency, low PAPR, wide range of adaptation by changing the order of M-FSK, suitable for easy non-coherent demodulation, good immunity to Doppler effect with DM-FSK coding.

  5. Design and investigation of a novel silicon/ferroelectric hybrid electro-optical microring modulator

    Science.gov (United States)

    Qi, Zhipeng; Hu, Guohua; Liu, Chang; Li, Lei; Yun, Binfeng; Zhang, Ruohu; Cui, Yiping

    2017-02-01

    A silicon (Si) and lanthanum-doped lead zirconium titanate (PLZT) hybrid microring modulator based on silicon-on-insulator (SOI) platform is designed theoretically and investigated numerically in this paper. The heterogeneous integration of PLZT film with Si material enables the waveguide to acquire both excellent electro-optical property and strong mode confinement capacity. Such hybrid microring modulator (100 μm in radius) has a PLZT rib-loaded cladding and is integrated with optimized tuning electrodes. The simulation results demonstrated that the Si/PLZT hybrid microring modulator could operate at 14 GHz with a relative high modulation efficiency (<0.8 V cm), which is much better than the other proposed Si/ferroelectric modulators. Meanwhile, under a driving voltage of 20 V, our modulator exhibits an extinction ratio of 32 dB at 1550.22 nm wavelength and a resonant wavelength tunability of 25 pm/V for TE mode. With these outstanding performances, the Si/PLZT hybrid microring modulator holds a great potential as a reliable on-chip device for optical communications and links.

  6. Multi-channel Acquisition of Spread Spectrum Signal based on PMF-FFT%基于PMF-FFT的扩频信号多通道并行捕获

    Institute of Scientific and Technical Information of China (English)

    方科

    2013-01-01

    PMF-FFT (Partial Matched Filters combined with Fast Fourier Transform) is increasingly applied in spread spectrum TT&C system for achieving the acquisition of spread spectrum signal. This paper analyzes theory, process and performance of PMF-FFT in acquiring spread spectrum signal. In order to match different acquisition demands of spread spectrum TT&C system, two implementations are proposed, which make full use of the multi-channel parallel processing architecture based on PMF-FFT by Multi-channel parallel acquisition in frequency and Multi-channel parallel acquisition in time-domain.%  目前在扩频测控通信系统中越来越多地采用了部分匹配滤波和快速傅里叶变换(PMF-FFT)的方法来实现扩频信号的捕获,这里分析了 PMF-FFT 实现扩频信号捕获的算法原理、过程和性能,充分利用多通道并行处理架构,提出了基于 PMF-FFT 的频域(频率分槽)多通道并行捕获和时域(伪码分区)多通道并行捕获两种不同的实现方法,以满足不同的扩频测控通信系统对伪码捕获性能的应用需求。

  7. A Featureless Chaotic Spread Spectrum Waveform%一种无特征混沌扩频波形的设计

    Institute of Scientific and Technical Information of China (English)

    姜艳

    2016-01-01

    The chaotic spread spectrum waveform ,as with high randomness and complexity, is widely applied in the fields of security and private communication. However the conventional chaotic waveform usually exhibits colored spectra, thus providing discernible features for the advisary to detect and acquire the transmitted data. The characteristic of chaotic sequence is discussed, and a featureless chaotic spread spectrum sequence designed. And based on the featureless chaotic sequence, a featureless chaotic spread spectrum waveform is generated. Simulation analysis indicates that, all cumulant from the first order up the fourth order of waveform is consistent with the White Gaussian noise, no difference with the White Gaussian noise, so the featureless chaotic spread spectrum waveform has fairly low detection probability and interception probability.%混沌扩频波形具有很高的类随机性和复杂性,被广泛运用于安全保密通信领域。但是,常规的混沌波形的频谱通常是一个有色频谱,从而为敌对检测截获方提供了可利用的有效特征。因此,从混沌序列设计出发,设计了一种无特征的混沌扩频序列,并且利用该混沌扩频序列产生出一种无特征混沌扩频波形。仿真结果表明,该波形在一阶到四阶的累积量特性都与高斯白噪声保持一致,使其无法与高斯白噪声区分,从而使波形具有很好的低检测低截获特性。

  8. Cycle Shift Spread Spectrum Technology in Underwater Acoustic Communication%循环移位扩频水声通信技术研究磁

    Institute of Scientific and Technical Information of China (English)

    王喜龙; 张琳琳; 郭小宇

    2014-01-01

    Direct sequence spread spectrum communication system can work reliably in low SNR conditions ,and has great ability of anti multipath and anti -jamming because of its excellent related performance .This is extremely valuable for information transmission without error in underwater acoustic communication .However ,the communication rate of routine direct sequence spread spectrum underwater acoustic communication system is very low ,according to this characteristic ,this article studies the mode of cycle shift spread spectrum underwater acoustic communication ,and it increases communication rate of direct sequence spread spectrum communication system in the proposition of to promise a certain anti-interference abil-ity .%直接序列扩频通信系统因为其优良的相关性能,能够在较低的信噪比条件下进行可靠地工作,而拥有良好的抗多径和抗干扰的能力。这对于水声通信信息的无误码传输都是极为可贵的。可是,常规的直接序列扩频水声通信系统的通信速率很低,针对这一特点,论文研究了循环移位扩频水声通信方式,它在保证一定抗干扰能力的前提下成倍数提高直接序列扩频通信系统的通信速率。

  9. A hybrid life-cycle inventory for multi-crystalline silicon PV module manufacturing in China

    Science.gov (United States)

    Yao, Yuan; Chang, Yuan; Masanet, Eric

    2014-11-01

    China is the world’s largest manufacturer of multi-crystalline silicon photovoltaic (mc-Si PV) modules, which is a key enabling technology in the global transition to renewable electric power systems. This study presents a hybrid life-cycle inventory (LCI) of Chinese mc-Si PV modules, which fills a critical knowledge gap on the environmental implications of mc-Si PV module manufacturing in China. The hybrid LCI approach combines process-based LCI data for module and poly-silicon manufacturing plants with a 2007 China IO-LCI model for production of raw material and fuel inputs to estimate ‘cradle to gate’ primary energy use, water consumption, and major air pollutant emissions (carbon dioxide, methane, sulfur dioxide, nitrous oxide, and nitrogen oxides). Results suggest that mc-Si PV modules from China may come with higher environmental burdens that one might estimate if one were using LCI results for mc-Si PV modules manufactured elsewhere. These higher burdens can be reasonably explained by the efficiency differences in China’s poly-silicon manufacturing processes, the country’s dependence on highly polluting coal-fired electricity, and the expanded system boundaries associated with the hybrid LCI modeling framework. The results should be useful for establishing more conservative ranges on the potential ‘cradle to gate’ impacts of mc-Si PV module manufacturing for more robust LCAs of PV deployment scenarios.

  10. Hybrid Design Optimization of High Voltage Pulse Transformers for Klystron Modulators

    CERN Document Server

    Sylvain, Candolfi; Davide, Aguglia; Jerome, Cros

    2015-01-01

    This paper presents a hybrid optimization methodology for the design of high voltage pulse transformers used in klystron modulators. The optimization process is using simplified 2D FEA design models of the 3D transformer structure. Each intermediate optimal solution is evaluated by 3D FEA and correction coefficients of the 2D FEA models are derived. A new optimization process using 2D FEA models is then performed. The convergence of this hybrid optimal design methodology is obtained with a limited number of time consuming 3D FEA simulations. The method is applied to the optimal design of a monolithic high voltage pulse transformer for the CLIC klystron modulator.

  11. Hybrid Modulation of Bidirectional Three-Phase Dual-Active-Bridge DC Converters for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Yen-Ching Wang

    2016-06-01

    Full Text Available Bidirectional power converters for electric vehicles (EVs have received much attention recently, due to either grid-supporting requirements or emergent power supplies. This paper proposes a hybrid modulation of the three-phase dual-active bridge (3ΦDAB converter for EV charging systems. The designed hybrid modulation allows the converter to switch its modulation between phase-shifted and trapezoidal modes to increase the conversion efficiency, even under light-load conditions. The mode transition is realized in a real-time manner according to the charging or discharging current. The operation principle of the converter is analyzed in different modes and thus design considerations of the modulation are derived. A lab-scaled prototype circuit with a 48V/20Ah LiFePO4 battery is established to validate the feasibility and effectiveness.

  12. Photovoltaic/thermal solar hybrid system with bifacial PV module and transparent plane collector

    Energy Technology Data Exchange (ETDEWEB)

    Robles-Ocampo, B. [Instituto Tecnologico de Celaya, Celaya 11111, Guanajuato (Mexico); CINVESTAV-Queretaro, Libramiento Norponiente 2000, Unidad Queretaro, Fracc. Real de Juriquilla, Queretaro, 76230, QRO (Mexico); Ruiz-Vasquez, E.; Canseco-Sanchez, H. [Instituto Tecnologico de Oaxaca, Oaxaca 68030, Oaxaca (Mexico); CINVESTAV-Queretaro, Libramiento Norponiente 2000, Unidad Queretaro, Fracc. Real de Juriquilla, Queretaro, 76230, QRO (Mexico); Cornejo-Meza, R.C. [Instituto Tecnologico de Tepic, av. Tecnologico 2595, Tepic 63175, Nayarit (Mexico); CINVESTAV-Queretaro, Libramiento Norponiente 2000, Unidad Queretaro, Fracc. Real de Juriquilla, Queretaro, 76230, QRO (Mexico); Trapaga-Martinez, G.; Vorobiev, Y.V. [CINVESTAV-Queretaro, Libramiento Norponiente 2000, Unidad Queretaro, Fracc. Real de Juriquilla, Queretaro, 76230, QRO (Mexico); Garcia-Rodriguez, F.J. [Instituto Tecnologico de Celaya, Celaya 11111, Guanajuato (Mexico); Gonzalez-Hernandez, J. [CIMAV, Miguel de Cervantes 120, Chihuahua 31109, Chihuahua (Mexico)

    2007-12-14

    Electric energy production with photovoltaic (PV)/thermal solar hybrid systems can be enhanced with the employment of a bifacial PV module. Experimental model of a PV/thermal hybrid system with such a module was constructed and studied. To make use of both active surfaces of the bifacial PV module, we designed and made an original water-heating planar collector and a set of reflecting planes. The heat collector was transparent in the visible and near-infrared spectral regions, which makes it compatible with the PV module made of crystalline Si. The estimated overall solar energy utilization efficiency for the system related to the direct radiation flux is of the order of 60%, with an electric efficiency of 16.4%. (author)

  13. A 3.9 μs Settling-Time Fractional Spread-Spectrum Clock Generator Using a Dual-Charge-Pump Control Technique for Serial-ATA Applications

    Directory of Open Access Journals (Sweden)

    Takashi Kawamoto

    2015-01-01

    Full Text Available A low-jitter fractional spread-spectrum clock generator (SSCG utilizing a fast-settling dual-charge-pump (CP technique is developed for serial-advanced technology attachment (SATA applications. The dual-CP architecture reduces a design area to 60% by shrinking an effective capacitance of a loop filter. Moreover, the settling-time is reduced by 4 μs to charge a current to the capacitor by only main-CP in initial period in settling-time. The SSCG is fabricated in a 0.13 μm CMOS and achieves settling time of 3.91 μs faster than 8.11 μs of a conventional SSCG. The random jitter and total jitter at 250 cycles at 1.5 GHz are less than 3.2 and 10.7 psrms, respectively. The triangular modulation signal frequency is 31.5 kHz and the modulation deviation is from −5000 ppm to 0 ppm at 1.5 GHz. The EMI reduction is 10.0 dB. The design area and power consumption are 300 × 700 μm and 18 mW, respectively.

  14. Hybrid silicon plasmonic organic directional coupler-based modulator

    Science.gov (United States)

    Abdelatty, M. Y.; Zaki, A. O.; Swillam, M. A.

    2017-01-01

    An optical directional coupler (ODC)-based hybrid plasmonic waveguide is designed and demonstrated with a power splitting mechanism that can be tuned by applying an external electric field. The tuning mechanism takes the advantage of electro-optic properties of the embedded polymer layer. The ODC operates under 1550 nm telecommunication wavelength. A finite element method with a perfect matching layer, absorbing boundary condition, is taken up to simulate and analyze the ODC.

  15. FPGA Techniques Based New Hybrid Modulation Strategies for Voltage Source Inverters

    OpenAIRE

    Sudha, L. U.; J. Baskaran; Elankurisil, S. A.

    2015-01-01

    This paper corroborates three different hybrid modulation strategies suitable for single-phase voltage source inverter. The proposed method is formulated using fundamental switching and carrier based pulse width modulation methods. The main tale of this proposed method is to optimize a specific performance criterion, such as minimization of the total harmonic distortion (THD), lower order harmonics, switching losses, and heat losses. The proposed method is articulated using fundamental switch...

  16. Laser assisted hybrid additive manufacturing of thermoelectric modules

    Science.gov (United States)

    Zhang, Tao; Tewolde, Mahder; Longtin, Jon P.; Hwang, David J.

    2017-02-01

    Thermoelectric generators (TEGs) are an attractive means to produce electricity, particular from waste heat applications. However, TEGs are almost exclusively manufactured as flat, rigid modules of limited size and shape, and therefore an appropriate mounting for intimate contact of TEGs modules onto arbitrary surfaces represents a significant challenge. In this study, we introduce laser assisted additive manufacturing method to produce multi-layered thermoelectric generator device directly on flat and non-flat surfaces for waste heat recovery. The laser assisted processing spans from laser scribing of thermal sprayed thin films, curing of dispensed thermoelectric inks and selective laser sintering to functionalize thermoelectric materials.

  17. Joint Adaptive Modulation and Combining for Hybrid FSO/RF Systems

    KAUST Repository

    Rakia, Tamer

    2015-11-12

    In this paper, we present and analyze a new transmission scheme for hybrid FSO/RF communication system based on joint adaptive modulation and adaptive combining. Specifically, the data rate on the FSO link is adjusted in discrete manner according to the FSO link\\'s instantaneous received signal-to-noise-ratio (SNR). If the FSO link\\'s quality is too poor to maintain the target bit-error-rate, the system activates the RF link along with the FSO link. When the RF link is activated, simultaneous transmission of the same modulated data takes place on both links, where the received signals from both links are combined using maximal ratio combining scheme. In this case, the data rate of the system is adjusted according to the instantaneous combined SNRs. Novel analytical expression for the cumulative distribution function (CDF) of the received SNR for the proposed adaptive hybrid system is obtained. This CDF expression is used to study the spectral and outage performances of the proposed adaptive hybrid FSO/RF system. Numerical examples are presented to compare the performance of the proposed adaptive hybrid FSO/RF system with that of switch-over hybrid FSO/RF and FSO-only systems employing the same adaptive modulation schemes. © 2015 IEEE.

  18. 直接序列扩频矿井通信系统的性能分析%Performance Analysis of Direct Sequence Spread Spectrum Mine Communication System

    Institute of Scientific and Technical Information of China (English)

    惠晓威; 辛晓敏

    2012-01-01

    The underground coal mine channel multipath fading is very severe, and the bit error rate of communication system is higher. In order to solve the problem, modeling and simulating mine channel with MATLAB/Simulink, and anglicizing its fading characteristics. As the spread spectrum communication have advantages of anti - multipath fading in theory, which can be applied to mine communication, through simulation show that: the system bit error rate under multipath Rayleigh fading channel is the highest; when the signal to noise ratio of the system is lower than 12. 5dB, the bit error rate of direct sequence spread spectrum communication system is lower than fading channels; further study found that: not that the longer the PN code, the higher the spread spectrum gain, the greater the signal to noise ratio, the better the system performance.%为了解决煤矿井下信道多径衰落严重、通信系统误码率较高的问题,利用MATLAB/Simulink进行建模与仿真,对矿井信道衰落特性进行分析;由于扩频通信在理论上具有抗多径衰落的优点,可将其应用到矿井通信,通过仿真表明:在多径瑞利衰落信道下,系统误码率最高;当系统信噪比低于12.5dB时,采用直接序列扩频通信系统的误码率要比衰落信道下的都低;进一步研究发现:并不是PN码码长越长、扩频增益越高、信噪比越大系统性能越好.

  19. Outdoor W-Band Hybrid Photonic Wireless Link Based on an Optical SFP+ Module

    DEFF Research Database (Denmark)

    Rommel, Simon; Rodríguez Páez, Juan Sebastián; Chorchos, Łukasz

    2016-01-01

    This letter proposes aW-band hybrid photonic wireless link based on a commercial SFP+ module and experimentally demonstrates its performance. Using a free running laser as local oscillator and heterodyne photonic upconversion, good frequency stability is achieved. Outdoor wireless transmission ov...

  20. Optically envelope detected QAM and QPSK RF modulated signals in hybrid wireless-fiber systems

    DEFF Research Database (Denmark)

    Tafur Monroy, Idelfonso; Prince, Kamau; Seoane, Jorge;

    2009-01-01

    from a 1.6 GHz carrier frequency to an IF at 500 MHz, requiring no high frequency local oscillator and mixer at the remote base station. This result proves the feasibility of optical envelope detection for complex modulation formats of RF signals for hybrid wireless-fiber transmission links....

  1. Design and Construction Transceiver Module Using Polymer PLC Hybrid Integration Technology

    OpenAIRE

    Jerabek, Vitezslav; Huttel, Ivan; Prajzler, Vaclav; Busek, Karel

    2010-01-01

    In this paper were presented first steps, which guide to the design and construction of a VHGT attached WDM triplex transceiver module TRx using polymer PLC hybrid integration technology. We report on the results measuring of the optical attenuation of the

  2. Performance and Stability of Supercapacitor Modules based on Porous Carbon Electrodes in Hybrid Powertrain

    Institute of Scientific and Technical Information of China (English)

    GONG Xuan; XIE Changjun; ZOU Yaohui; QUAN Shuhai; PIOTR Bujlo; SHEN Di

    2014-01-01

    Hybrid power sources have attracted much attention in the electric vehicle area. Particularly, electric-electric hybrid powertrain system consisting of supercapacitor modules and lithium-ion batteries has been widely applied because of the high power density of supercapacitors. In this study, we design a hybrid powertrain system containing two porous carbon electrode-based supercapacitor modules in parallel and one lithium ion battery pack. With the construction of the testing station, the performance and stability of the used supercapacitor modules are investigated in correlation with the structure of the supercapacitor and the nature of the electrode materials applied. It has been shown that the responding time for voltage vibration from 20 V to 48.5 V during charging or discharging process decreases from about 490 s to 94 s with the increase in applied current from 20 A to 100 A. The capacitance of the capacitor modules is nearly independent on the applied current. With the designed setup, the energy efficiency can reach as high as 0.99. The results described here provide a guidance for material selection of supercapacitors and optimized controlling strategy for hybrid power system applied in electric vehicles.

  3. HDI flexible front-end hybrid prototype for the PS module of the CMS tracker upgrade

    Science.gov (United States)

    Kovacs, M.; Blanchot, G.; Gadek, T.; Honma, A.; Koliatos, A.

    2017-02-01

    The CMS tracker upgrade for the HL-LHC relies on different module types, depending on the position of the respective module. They are built with high-density interconnection flexible circuits that are wire bonded to silicon strip and pixel-strip sensors. The Front-End hybrids will contain several flip-chip bonded readout ASICs that are still under development. Mock-up prototypes are used to qualify the advanced flexible circuit technology and the parameters of the hybrids. This paper presents the Pixel-Strip (PS) mock-up hybrid in terms of testing, interconnection, fold-over, thermal properties and layout feasibility. Plans for circuit testing at operating temperature (-30o) are also presented.

  4. Planar Integrated Magnetics (PIM) Module in Hybrid Bidirectional DC-DC Converter for Fuel Cell Application

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Zhang, Zhe; Thomsen, Ole Cornelius

    2011-01-01

    , hereby increasing the power density of converters. In this paper, a new planar integrated magnetics (PIM) module for a phase-shift plus duty cycle controlled hybrid bi-directional dc-dc converter is proposed, which assembles one boost inductor and two transformers into an E-I-E core geometry, reducing...... and theoretical analysis, a lab prototype employing the PIM module is implemented for a fuel cell application with 20~40 V input voltage and 400 V output voltage. Detailed results from the experimental comparisons demonstrate that the PIM module is fully functional and electromagnetically equivalent...

  5. Modulation of tyrosine hydroxylase gene expression in the central nervous system visualized by in situ hybridization

    Energy Technology Data Exchange (ETDEWEB)

    Berod, A.; Biguet, N.F.; Dumas, S.; Bloch, B.; Mallet, J.

    1987-03-01

    cDNA probe was used for in situ hybridization studies on histological sections through the locus coeruleus, substantia nigra, and the ventral tegmental area of the rat brain. Experimental conditions were established that yielded no background and no signal when pBR322 was used as control probe. Using the tyrosine hydroxylase probe, the authors ascertained the specificity of the labeling over catecholaminergic cells by denervation experiments and comparison of the hybridization pattern with that of immunoreactivity. The use of /sup 35/S-labeled probe enabled the hybridization signal to be resolved at the cellular level. A single injection of reserpine into the rat led to an increase of the intensity of the autoradiographic signal over the locus coeruleus area, confirming an RNA gel blot analysis. The potential of in situ hybridization to analyze patterns of modulation of gene activity as a result of nervous activity is discussed.

  6. Algorithm of constructing hybrid effective modules for elastic isotropic composites

    Science.gov (United States)

    Svetashkov, A. A.; Miciński, J.; Kupriyanov, N. A.; Barashkov, V. N.; Lushnikov, A. V.

    2017-02-01

    The algorithm of constructing of new effective elastic characteristics of two-component composites based on the superposition of the models of Reiss and Voigt, Hashin and Strikman, as well as models of the geometric average for effective modules. These effective characteristics are inside forks Voigt and Reiss. Additionally, the calculations of the stress-strain state of composite structures with new effective characteristics give more accurate prediction than classical models do.

  7. Very long pulse high-RF power test of a lower hybrid frequency antenna module

    Energy Technology Data Exchange (ETDEWEB)

    Goniche, M.; Brossaud, J.; Barral, C.; Berger-By, G.; Bibet, Ph.; Poli, S.; Rey, G.; Tonon, G. [Association Euratom-CEA, Centre d`Etudes Nucleaires de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Seki, M.; Obara, K. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1994-03-01

    Outgassing, induced by very long RF waves injection at high power density was studied in a module, able to be used for a lower hybrid frequency antenna. Good RF properties of the module are reported, however, resonance phenomena with strong absorption of RF power (15%) was observed at high temperature (T>400 deg C). A large outgassing data base is provided by the 75 shots cumulating 27 hours of RF injection. The comparison with previous experiments (Tore Supra and TdV prototype modules) confirm the effect of baking and results are consistent. Outgassing increases exponentially with -1/T, and a desorption model with an activation energy Ed {approx} 0.35 eV fits the data up to 400 deg C. In order to design vacuum pumping system for large lower hybrid frequency antenna, outgassing rates are given for different working temperatures. (author). 11 refs., 55 figs.

  8. FPGA techniques based new hybrid modulation strategies for voltage source inverters.

    Science.gov (United States)

    Sudha, L U; Baskaran, J; Elankurisil, S A

    2015-01-01

    This paper corroborates three different hybrid modulation strategies suitable for single-phase voltage source inverter. The proposed method is formulated using fundamental switching and carrier based pulse width modulation methods. The main tale of this proposed method is to optimize a specific performance criterion, such as minimization of the total harmonic distortion (THD), lower order harmonics, switching losses, and heat losses. The proposed method is articulated using fundamental switching and carrier based pulse width modulation methods. Thus, the harmonic pollution in the power system will be reduced and the power quality will be augmented with better harmonic profile for a target fundamental output voltage. The proposed modulation strategies are simulated in MATLAB r2010a and implemented in a Xilinx spartan 3E-500 FG 320 FPGA processor. The feasibility of these modulation strategies is authenticated through simulation and experimental results.

  9. The Research of a Spread Spectrum Communication Receiving System based on DSP%基于DSP的扩频通信接收系统的研究

    Institute of Scientific and Technical Information of China (English)

    姚新敏

    2014-01-01

    DSP considerable progress has been made in recent years has been widely used in communications, image processing, speech processing, medical equipment etc. In spread spectrum communications, the use of DSP chips, a development can be effective systems design, to improve the capacity and flexibility in adapting to capacity. This paper mainly study the spread spectrum communication system with high speed based on DSP, the feasibility of the system is analyzed.%数字信号处理(Digital Signal Processing,DSP)近年来得到长足发展,被广泛应用于通信、图像处理、语音处理、医疗设备等方面,在扩频通信中,利用DSP芯片进行开发,可以有效的进行系统设计,提高系统的处理能力和灵活适应能力。本课题主要是研究了基于高速DSP的扩频通信系统,对该系统的可行性进行了分析。

  10. Pulse Power Hybrid Energy Storage Module Development Program

    Science.gov (United States)

    2015-05-01

    simulation results were shown in Fig. 11.) 28 14. One of the two reference MatLab Simulink models for the study of the effect of HESMs and a pulsed load...the Megawatt Power Module 44 25 Block diagram of the MPM system - two flywheels per skid configuration 45 26 MatLab Simulink model of a two...Network McKttile Fig. 14. One of the two reference MatLab Simulink models for the study of the effect of HESMs and a pulsed load on a ship’s power

  11. One-dimensional photonic crystal slot waveguide for silicon-organic hybrid electro-optic modulators.

    Science.gov (United States)

    Yan, Hai; Xu, Xiaochuan; Chung, Chi-Jui; Subbaraman, Harish; Pan, Zeyu; Chakravarty, Swapnajit; Chen, Ray T

    2016-12-01

    In an on-chip silicon-organic hybrid electro-optic (EO) modulator, the mode overlap with EO materials, in-device effective r33, and propagation loss are among the most critical factors that determine the performance of the modulator. Various waveguide structures have been proposed to optimize these factors, yet there is a lack of comprehensive consideration on all of them. In this Letter, a one-dimensional (1D) photonic crystal (PC) slot waveguide structure is proposed that takes all these factors into consideration. The proposed structure takes advantage of the strong mode confinement within a low-index region in a conventional slot waveguide and the slow-light enhancement from the 1D PC structure. Its simple geometry makes it robust to resist fabrication imperfections and helps reduce the propagation loss. Using it as a phase shifter in a Mach-Zehnder interferometer structure, an integrated silicon-organic hybrid EO modulator was experimentally demonstrated. The observed effective EO coefficient is as high as 490 pm/V. The measured half-wave voltage and length product is less than 1  V·cm and can be further improved. A potential bandwidth of 61 GHz can be achieved and further improved by tailoring the doping profile. The proposed structure offers a competitive novel phase-shifter design, which is simple, highly efficient, and with low optical loss, for on-chip silicon-organic hybrid EO modulators.

  12. High RF power test of a lower hybrid module mock-up in carbon fiber composite

    Energy Technology Data Exchange (ETDEWEB)

    Goniche, M.; Bibet, P.; Brossaud, J.; Cano, V.; Froissard, P.; Kazarian, F.; Rey, G. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Maebara, S.; Kiyono, K.; Seki, M.; Suganuma, K.; Ikeda, Y.; Imai, T. [Japan Atomic Energy Research Inst., Tokyo (Japan). Dept. of Fusion Facility

    1999-02-01

    A mock-up module of a Lower Hybrid Current Drive antenna module of a Carbon Fiber Composite (CFC) was fabricated for the development of heat resistive front facing the plasma. This module is made from CFC plates and rods which are copper coated to reduce the RF losses. The withstand-voltage, the RF properties and outgassing rates for long pulses and high RF power were tested at the Lower Hybrid test bed facility of Cadarache. After the short pulse conditioning, long pulses with a power density ranging between 50 and 150 MW/m{sup 2} were performed with no breakdowns. During these tests, the module temperaturewas increasing from 100-200 deg. C to 400-500 deg. C. It was also checked that high power density, up to 150 MW/m{sup 2}, could be transmitted when the waveguides are filled with H{sub 2} at a pressure of 5 x 10{sup -2} Pa. No significant change in the reflection coefficient is measured after the long pulse operation. During a long pulse, the power reflection increases during the pulse typically from 0.8% to 1.3%. It is concluded that the outgassing rate of Cu-plated CFC is about 6 times larger than of Dispersion Strengthened Copper (DSC) module at the module temperature of 300 deg. C. No significant increase of the global outgassing of the CFC module was measured after hydrogen pre-filling. After the test, visual inspection revealed that peeling of the copper coating occurred at one end of the module only on a very small area (0.2 cm{sup 2}). It is assessed that a CFC module is an attractive candidate for the hardening of the tip of the LHCD antenna. (authors)

  13. Dosimetric comparison of hybrid volumetric-modulated arc therapy, volumetric-modulated arc therapy, and intensity-modulated radiation therapy for left-sided early breast cancer

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jia-Fu [Department of Radiation Physics, Taichung Veterans General Hospital, Taichung, Taiwan (China); Yeh, Dah-Cherng [Department of General Surgery, Taichung Veterans General Hospital, Taichung, Taiwan (China); Yeh, Hui-Ling, E-mail: hlyeh@vghtc.gov.tw [Department of Radiation Oncology, Taichung Veterans General Hospital, Taichung, Taiwan (China); Chang, Chen-Fa [Department of Radiation Physics, Taichung Veterans General Hospital, Taichung, Taiwan (China); Lin, Jin-Ching [Department of Radiation Oncology, Taichung Veterans General Hospital, Taichung, Taiwan (China)

    2015-10-01

    To compare the dosimetric performance of 3 different treatment techniques: hybrid volumetric-modulated arc therapy (hybrid-VMAT), pure-VMAT, and fixed-field intensity-modulated radiation therapy (F-IMRT) for whole-breast irradiation of left-sided early breast cancer. The hybrid-VMAT treatment technique and 2 other treatment techniques—pure-VMAT and F-IMRT—were compared retrospectively in 10 patients with left-sided early breast cancer. The treatment plans of these patients were replanned using the same contours based on the original computed tomography (CT) data sets. Dosimetric parameters were calculated to evaluate plan quality. Total monitor units (MUs) and delivery time were also recorded and evaluated. The hybrid-VMAT plan generated the best results in dose coverage of the target and the dose uniformity inside the target (p < 0.0001 for conformal index [CI]; p = 0.0002 for homogeneity index [HI] of planning target volume [PTV]{sub 50.4} {sub Gy} and p < 0.0001 for HI of PTV{sub 62} {sub Gy}). Volumes of ipsilateral lung irradiated to doses of 20 Gy (V{sub 20} {sub Gy}) and 5 Gy (V{sub 5} {sub Gy}) by the hybrid-VMAT plan were significantly less than those of the F-IMRT and the pure-VMAT plans. The volume of ipsilateral lung irradiated to a dose of 5 Gy was significantly less using the hybrid-VMAT plan than that using the F-IMRT or the pure-VMAT plan. The total mean MUs for the hybrid-VMAT plan were significantly less than those for the F-IMRT or the pure-VMAT plan. The mean machine delivery time was 3.23 ± 0.29 minutes for the hybrid-VMAT plans, which is longer than that for the pure-VMAT plans but shorter than that for the F-IMRT plans. The hybrid-VMAT plan is feasible for whole-breast irradiation of left-sided early breast cancer.

  14. Hybrid Enrichment Verification Array: Module Characterization Studies Version 2

    Energy Technology Data Exchange (ETDEWEB)

    Zalavadia, Mital A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, Leon E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McDonald, Benjamin S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kulisek, Jonathan A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mace, Emily K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Deshmukh, Nikhil S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-01

    The work presented in this report is focused on the characterization and refinement of the HEVA approach, which combines the traditional 186-keV 235U signature with high-energy prompt gamma rays from neutron capture in the detector and surrounding collimator material, to determine the relative enrichment and 235U mass of the cylinder. The design of the HEVA modules (hardware and software) deployed in the current field trial builds on over seven years of study and evolution by PNNL and consists of a ø3''×3'' NaI(Tl) scintillator coupled to an Osprey digital multi-channel analyzer tube base from Canberra. In comparison to previous versions, the new design boosts the high energy prompt gamma-ray signature, provides more flexible and effective collimation, and improves count-rate management via commercially available pulse-processing electronics with a special modification prompted by PNNL.

  15. Existing PON Infrastructure Supported Hybrid Fiber-Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Yu, Xianbin; Zhao, Ying; Deng, Lei;

    2012-01-01

    We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals.......We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals....

  16. Development of a Hybrid Compressor/Expander Module for Automotive Fuel Cell Applications

    Energy Technology Data Exchange (ETDEWEB)

    McTaggart, Paul

    2004-12-31

    In this program TIAX LLC conducted the development of an advanced technology compressor/expander for supplying compressed air to Proton Exchange Membrane (PEM) fuel cells in transportation applications. The overall objective of this program was to develop a hybrid compressor/expander module, based on both scroll and high-speed turbomachinery technologies, which will combine the strengths of each technology to create a concept with superior performance at minimal size and cost. The resulting system was expected to have efficiency and pressure delivery capability comparable to that of a scroll-only machine, at significantly reduced system size and weight when compared to scroll-only designs. Based on the results of detailed designs and analyses of the critical system elements, the Hybrid Compressor/Expander Module concept was projected to deliver significant improvements in weight, volume and manufacturing cost relative to previous generation systems.

  17. Rational Design of a Novel AMPA Receptor Modulator through a Hybridization Approach

    Science.gov (United States)

    2015-01-01

    The α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors are a family of glutamate ion channels of considerable interest in excitatory neurotransmission and associated disease processes. Here, we demonstrate how exploitation of the available X-ray crystal structure of the receptor ligand binding domain enabled the development of a new class of AMPA receptor positive allosteric modulators (7) through hybridization of known ligands (5 and 6), leading to a novel chemotype with promising pharmacological properties. PMID:25893038

  18. 四种超宽带扩频方案的电磁兼容性能研究%Research on the Electromagnetic Compatibility of Four Ultra-wideband Spread Spectrum Schemes

    Institute of Scientific and Technical Information of China (English)

    赵亮; 金梁; 刘双平; 黄开枝; 钟州

    2011-01-01

    As the protection distance is limited, ultra-wideband signals may still interfere another communication system even with the satisfaction of the power spectral density limit. This paper derives the common expressions of bit error rate of another communication system without spread spectrum under the interference of the four ultra-wideband spread spectrum signals which pass through AWGN channel, and the four ultra-wideband spread spectrum schemes are direct sequence spread spectrum, time-hopping spread spectrum, frequency-hopping spread spectrum and chirp spread spectrum. The derived expressions are validated by Monte Carlo simulations. Also provided here are the simulation results obtained when ultra-wideband spread spectrum signals pass through IEEE 802.15.3a CM4 channel. The conclusions can be used as important references for the electromagnetic compatibility performance evaluation and the selection of spread spectrum schemes of ultra-wideband systems.%由于保护距离有限,在满足功率谱密度限制的条件下超宽带信号仍然可能对其它通信系统产生一定的干扰.该文在直接序列扩频、跳时扩频、跳频扩频和线性调频扩频4种超宽带扩频信号通过AWGN信道时,推导了在超宽带扩频信号干扰下未扩频的其它通信系统误比特率的通用表达式,并通过蒙特卡罗仿真验证了理论推导的正确性.同时还给出了超宽带扩频信号通过IEEE802.15.3aCM4信道时的仿真结果.这些结论为超宽带系统的电磁兼容性能评价和扩频方案选择提供了重要参考.

  19. Ultra-thin silicon/electro-optic polymer hybrid waveguide modulators

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Feng; Spring, Andrew M. [Institute for Materials Chemistry and Engineering, Kyushu University, 6-1 Kasuga-koen Kasuga, Fukuoka 816-8580 (Japan); Sato, Hiromu [Department of Molecular and Material Sciences, Kyushu University, 6-1 Kasuga-koen Kasuga, Fukuoka 816-8580 (Japan); Maeda, Daisuke; Ozawa, Masa-aki; Odoi, Keisuke [Nissan Chemical Industries, Ltd., 2-10-1 Tuboi Nishi, Funabashi, Chiba 274-8507 (Japan); Aoki, Isao; Otomo, Akira [National Institute of Information and Communications Technology, 588-2 Iwaoka, Nishi-ku, Kobe 651-2492 (Japan); Yokoyama, Shiyoshi, E-mail: s-yokoyama@cm.kyushu-u.ac.jp [Institute for Materials Chemistry and Engineering, Kyushu University, 6-1 Kasuga-koen Kasuga, Fukuoka 816-8580 (Japan); Department of Molecular and Material Sciences, Kyushu University, 6-1 Kasuga-koen Kasuga, Fukuoka 816-8580 (Japan)

    2015-09-21

    Ultra-thin silicon and electro-optic (EO) polymer hybrid waveguide modulators have been designed and fabricated. The waveguide consists of a silicon core with a thickness of 30 nm and a width of 2 μm. The cladding is an EO polymer. Optical mode calculation reveals that 55% of the optical field around the silicon extends into the EO polymer in the TE mode. A Mach-Zehnder interferometer (MZI) modulator was prepared using common coplanar electrodes. The measured half-wave voltage of the MZI with 7 μm spacing and 1.3 cm long electrodes is 4.6 V at 1550 nm. The evaluated EO coefficient is 70 pm/V, which is comparable to that of the bulk EO polymer film. Using ultra-thin silicon is beneficial in order to reduce the side-wall scattering loss, yielding a propagation loss of 4.0 dB/cm. We also investigated a mode converter which couples light from the hybrid EO waveguide into a strip silicon waveguide. The calculation indicates that the coupling loss between these two devices is small enough to exploit the potential fusion of a hybrid EO polymer modulator together with a silicon micro-photonics device.

  20. A New Blind 2D-RAKE Receiver Based on CMA Criteria for Spread Spectrum Systems Suitable for Software Defined Radio Architecture

    Science.gov (United States)

    Takayama, Kei; Kamiya, Yukihiro; Fujii, Takeo; Suzuki, Yasuo

    Spread Spectrum (SS) has been widely used for various wireless systems such as cellular systems, wireless local area network (LAN) and so on. Using multiple antennas at the receiver, two-dimensional (2D) RAKE is realized over the time- and the space-domain. However, it should be noted that the 2D-RAKE receiver must detect the bit timing prior to the RAKE combining. In case of deep fading, it is often difficult to detect it due to low signal-to-noise power ratio (SNR). To solve this problem, we propose a new blind 2D-RAKE receiver based on the constant modulus algorithm (CMA). Since it does not need a priori bit timing detection, it is possible to compensate frequency selective fading even in very low SNR environments. The proposed method is particularly suitable for the software defined radio (SDR) architecture. The performance of the proposed method is investigated through computer simulations.

  1. Super Short Baseline Underwater Acoustic Positioning Supported by Inertial Navigation Data Using Spread Spectrum Communication for Autonomous Underwater Vehicle and Error Analysis in Deep Water

    Science.gov (United States)

    Watanabe, Yoshitaka; Ochi, Hiroshi; Shimura, Takuya; Hattori, Takehito

    2009-07-01

    A tracking and positioning method achieved by integration of the super short baseline (SSBL) and inertial navigation system (INS) data for an autonomous underwater vehicle (AUV) is introduced. The proposed method uses a continuous acoustic signal as the response signal from the target AUV. The INS data obtained in the AUV is transmitted with the acoustic signal by the direct-sequence spread spectrum (DSSS) technique and the SSBL estimation is achieved using the same signal. The error of the SSBL, particularly the influence of a multipath, was analyzed. The use of a continuous signal showed that the multipath is influential even if its level is small relative to the direct wave. This influence was observed under actual conditions in an ocean experiment in a deep-water area. The proposed method was confirmed to be available and useful by simulations and experimental results.

  2. An Angle Tracking Method for UAV feeble Spread Spectrum Signal%一种无人机微弱扩频信号角跟踪方法

    Institute of Scientific and Technical Information of China (English)

    王春龙; 马传焱; 时荔蕙; 郝博雅; 周洲

    2016-01-01

    The conventional UAV TT&C signals can be easily disturbed and captured.Based on UAV TT&C system,this paper puts forward an implement method of single channel and single pulse tracking system for UAV feeble spread spectrum signal. At the same time,the difficulties such as parallel and fast acquisition of spread spectrum signal and high⁃precision correlation demodulation of error voltage are also broken through.This method can fully use the existing TT&C channel without adding equipment,and it has such charac⁃teristics as high sensitivity,high tracking accuracy,simple algorithm,simple equipment,etc.,which is very suitable for high⁃precision angle measuring and tracking of UAV.%传统的无人机测控信号容易被干扰和截获。在现有无人机测控系统的基础上,给出了一种无人机微弱扩频信号的单通道单脉冲跟踪系统的实现方法,同时突破了扩频信号并行快捕和误差电压的高精度相关解调等难题。该方法可以充分利用现有测控信道而无需额外增加设备量,具有跟踪系统灵敏度高、跟踪精度高、算法简单和设备简单等特点,特别适合于对无人机的隐蔽高精度测角跟踪。

  3. Research of direct sequence spread spectrum signal code element synchronization%直序扩频信号码元的同步方法研究

    Institute of Scientific and Technical Information of China (English)

    邱冬冬; 鲁新龙; 杜建尧; 金华松

    2012-01-01

    The spread spectrum technology is a form of information transmitting in which the RF bandwidth is much larger than the bandwidth of the information itself, two kinds of capture methods of direct sequence spread spectrum system code element synchronization were introduced in this paper;they were the full parallel capture method and the serial capture method. Then,classification and principles of the serial capture method were introduced in detail,and they were compared. Finally,code element tracking in code element synchronization was introduced,a general working' model of code element tracking loop-delay locked loop was put forward,and it was simulated by System View.%扩频通信技术是指用来传输信息的射频带宽远大于信息本身带宽的一种信息传输方式,介绍了直接序列扩频系统码元同步的两种捕获方法:全并行捕获方法和串行捕获方法.详细讲述了串行捕获方法的分类和原理,并对它们作了比较,最后,就码元同步中的码元跟踪进行了介绍,给出了码跟踪环—延迟锁定环(DLL)的一般工作模型,并使用System View对其进行了仿真.

  4. HybridArc: A novel radiation therapy technique combining optimized dynamic arcs and intensity modulation

    Energy Technology Data Exchange (ETDEWEB)

    Robar, James L., E-mail: james.robar@cdha.nshealth.ca [Department of Radiation Oncology, Dalhousie University, Halifax (Canada); Department of Physics and Atmospheric Science, Dalhousie University, Halifax (Canada); Thomas, Christopher [Department of Radiation Oncology, Dalhousie University, Halifax (Canada)

    2012-01-01

    This investigation focuses on possible dosimetric and efficiency advantages of HybridArc-a novel treatment planning approach combining optimized dynamic arcs with intensity-modulated radiation therapy (IMRT) beams. Application of this technique to two disparate sites, complex cranial tumors, and prostate was examined. HybridArc plans were compared with either dynamic conformal arc (DCA) or IMRT plans to determine whether HybridArc offers a synergy through combination of these 2 techniques. Plans were compared with regard to target volume dose conformity, target volume dose homogeneity, sparing of proximal organs at risk, normal tissue sparing, and monitor unit (MU) efficiency. For cranial cases, HybridArc produced significantly improved dose conformity compared with both DCA and IMRT but did not improve sparing of the brainstem or optic chiasm. For prostate cases, conformity was improved compared with DCA but not IMRT. Compared with IMRT, the dose homogeneity in the planning target volume was improved, and the maximum doses received by the bladder and rectum were reduced. Both arc-based techniques distribute peripheral dose over larger volumes of normal tissue compared with IMRT, whereas HybridArc involved slightly greater volumes of normal tissues compared with DCA. Compared with IMRT, cranial cases required 38% more MUs, whereas for prostate cases, MUs were reduced by 7%. For cranial cases, HybridArc improves dose conformity to the target. For prostate cases, dose conformity and homogeneity are improved compared with DCA and IMRT, respectively. Compared with IMRT, whether required MUs increase or decrease with HybridArc was site-dependent.

  5. Design and Development of Hybrid Multilevel Inverter employing Dual Reference Modulation Technique for Fuel Cell Applications

    Directory of Open Access Journals (Sweden)

    R. Seyezhai

    2011-10-01

    Full Text Available MultiLevel Inverter (MLI has been recognized as an attractive topology for high voltage DC-AC conversion. This paper focuses on a new dual reference modulation technique for a hybrid multilevel inverter employing Silicon carbide (SiC switches for fuel cell applications. The proposed modulation technique employs two reference waveforms and a single inverted sine wave as the carrier waveform. This technique is compared with the conventional dual carrier waveform in terms of output voltage spectral quality and switching losses. An experimental five-level hybrid inverter test rig has been built using SiC switches to implement the proposed algorithm. Gating signals are generated using PIC microcontroller. The performance of the inverter has been analyzed and compared with the result obtained from theory and simulation. Simulation study of Proportional Integral (PI controller for the inverter employing the proposed modulation strategy has been done in MATLAB/SIMULINK. Keywords: Multilevel inverter, SiC , dual reference modulation, switching losses, PI

  6. 基于多径分量重组的扩频通信信道均衡设计%Spread Spectrum Communication Channel Equalization Design Based on Multipath Component Recombination

    Institute of Scientific and Technical Information of China (English)

    王晓雯

    2016-01-01

    扩频通信中,由于扩频码序列所占的带宽度远大于所传信息的最小带宽,引起码间干扰和信道失衡,通过对扩频通信的信道均衡设计,降低扩频通信的误码率。传统方法采用子信道载波干扰抑制的扩频通信信道均衡算法,通过扩频码控制子信道载波线性调频变化,实现码间干扰抑制,但该算法会引起时分复用系统之间的相位畸变,信道均衡效果不好。提出一种基于多径分量重组的扩频通信信道均衡算法。先构建了扩频通信的信道模型,分析了扩频通信信道的时变特性,采用多径分量重组实现码间干扰抑制,结合多阵元被动时间反转镜技术实现扩频通信的信道均衡。仿真结果表明,采用该算法进行扩频通信信道均衡和码间干扰抑制,降低通信误码率,改善通信质量,提高了扩频通信系统的稳定性和可靠性。%In spread spectrum communication, because of the spread spectrum code sequence for the band width is much larger than the transmitted information minimum bandwidth, causing intersymbol interference and channel imbalance, through the spread spectrum communication channel equalization design, reduce the bit error rate of the spread spectrum communication. Traditional methods using sub carrier channel interference suppression in spread spectrum communication channel equalization algorithm, to achieve inter symbol interference suppression by spread spectrum codes control sub carrier channel linear FM changes, but the algorithm will phase distortion caused by time division multiplexing system, channel equalization effect is not good. A spread spectrum communication channel equalization algorithm based on multipath component is proposed. First, constructs the spread spectrum communication channel model, analysis of the spread spectrum communication channel characteristic and the multipath component of the reorganization of the realization of

  7. Research and simulation on m-sequences, Gold sequences and orthogonal Gold sequences of spread spectrum communication system%m序列、Gold序列和正交Gold序列的扩频通信系统仿真研究

    Institute of Scientific and Technical Information of China (English)

    陶崇强; 杨全; 袁晓

    2012-01-01

    为了研究扩频码对直接序列扩频通信系统性能的影响,利用Matlab编程建立直接序列扩频通信系统模型,对该系统进行性能仿真。通过在不同的信噪比条件下,运行仿真系统,得出扩频增益和三种不同扩频码对系统性能影响的结论。%Describes the theoretical basis of direct spread spectrum communication and model, maflab programming through a direct spread spectrum communication system design and performance simulation of the system, run under different conditions in the system studied and the different spread spectrum spreading gain code on the system performance.

  8. Performing Hybrid Recommendation in Intermodal Transportation-the FTMarket System's Recommendation Module

    CERN Document Server

    Lazanas, Alexis

    2009-01-01

    Diverse recommendation techniques have been already proposed and encapsulated into several e-business applications, aiming to perform a more accurate evaluation of the existing information and accordingly augment the assistance provided to the users involved. This paper reports on the development and integration of a recommendation module in an agent-based transportation transactions management system. The module is built according to a novel hybrid recommendation technique, which combines the advantages of collaborative filtering and knowledge-based approaches. The proposed technique and supporting module assist customers in considering in detail alternative transportation transactions that satisfy their requests, as well as in evaluating completed transactions. The related services are invoked through a software agent that constructs the appropriate knowledge rules and performs a synthesis of the recommendation policy.

  9. High RF power test of a CFC antenna module for lower hybrid current drive

    Energy Technology Data Exchange (ETDEWEB)

    Maebara, S.; Seki, M.; Ikeda, Y.; Kiyono, K.; Suganuma, K.; Imai, T. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Goniche, M.; Bibet, Ph.; Brossaud, J.; Cano, V.; Kazarian-Vibert, F.; Froissard, P.; Rey, G. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    1998-07-01

    A mock-up of a 3.7 GHz Lower Hybrid Current Drive (LHCD) antenna module was fabricated from Carbon Fibre Composite (CFC) for the development of heat resistive low Z front facing the plasma. This 2 divided waveguide module is made from CFC plates and rods which are Cu-plated to reduce the RF losses. The withstand-voltage, the RF properties and the outgassing rates for long pulses and high RF power were tested at the Lower Hybrid test bed facility of Cadarache. A reference module made from Dispersion Strengthened Copper (DSC) was also fabricated. After the short pulse conditioning, long pulses with a power density ranging between 50 and 150 MW/m{sup 2} were performed with no breakdowns on the CFC module. It was also checked that the highest power density, up to 150 MW/m{sup 2}, could be transmitted when the waveguides are filled with H2 at a pressure of 5 x 10{sup -2} Pa. During a long pulse, the power reflection coefficient remains low in the 0.8-1.3 % range and no significant change in the reflection coefficient is measured after the thermal cycling provided by the long pulse operation. From thermocouple measurements, RF losses of the copper coated CFC and the DSC modules were compared. No significant differences were measured. From pressure measurements, it was found that the outgassing rate of Cu-plated CFC is about 6-7 times larger than of DSC at 300 deg.C. It is concluded that a CFC module is an attractive candidate for the hardening of the tip of the LHCD antenna. (author)

  10. Double random phase spread spectrum spread space technique for secure parallel optical multiplexing with individual encryption key

    Science.gov (United States)

    Hennelly, B. M.; Javidi, B.; Sheridan, J. T.

    2005-09-01

    A number of methods have been recently proposed in the literature for the encryption of 2-D information using linear optical systems. In particular the double random phase encoding system has received widespread attention. This system uses two Random Phase Keys (RPK) positioned in the input spatial domain and the spatial frequency domain and if these random phases are described by statistically independent white noises then the encrypted image can be shown to be a white noise. Decryption only requires knowledge of the RPK in the frequency domain. The RPK may be implemented using a Spatial Light Modulators (SLM). In this paper we propose and investigate the use of SLMs for secure optical multiplexing. We show that in this case it is possible to encrypt multiple images in parallel and multiplex them for transmission or storage. The signal energy is effectively spread in the spatial frequency domain. As expected the number of images that can be multiplexed together and recovered without loss is proportional to the ratio of the input image and the SLM resolution. Many more images may be multiplexed with some loss in recovery. Furthermore each individual encryption is more robust than traditional double random phase encoding since decryption requires knowledge of both RPK and a lowpass filter in order to despread the spectrum and decrypt the image. Numerical simulations are presented and discussed.

  11. Low-cost coherent UDWDM-PON by hybrid DBPSK/ASK-2 modulation

    Science.gov (United States)

    Li, Yuan; Deng, Zhuanhua; Hu, Rong; li, Cai; Li, Wei; Yuan, Zhilin; Yu, Shaohua

    2016-07-01

    The coherent ultra-dense wavelength division multiplexed passive optical network (UDWDM-PON) has been widely studied recently, in which the envelop detection based coherent reception of on-off keying (OOK) signal has been shown to possess both high receiver sensitivity and tolerance against laser linewidth/chirp. In order to increase the spectral efficiency (SE) to 2 bit/s/Hz, researchers formulated a hybrid DBPSK/ASK-2 modulation using the silicon Mach-Zehnder modulator (MZM), where both amplitude and phase modulation are employed. The experimental result shows that the proposed DBPSK/ASK-2 modulation is of better performance than PAM-4 at the same SE of 2 bit/s/Hz. When the low-cost silicon MZM and DFB laser of 4-MHz linewidth are employed, the receiver sensitivity of DBPSK/ASK-2 exceeds that of the PAM-4 by about 5.7 dB. This work can achieve about -46 dBm receiver sensitivity at 2.5 GBaud after transmission over 80-km standard single mode fiber (SSMF). The proposed DBPSK/ASK-2 modulation using low-cost silicon MZM and DFB laser is considered as a practical and reliable method for the future UDWDM-PON at the SE of 2 bit/s/Hz.

  12. Antenna-coupled silicon-organic hybrid integrated photonic crystal modulator for broadband electromagnetic wave detection

    CERN Document Server

    Zhang, Xingyu; Subbaraman, Harish; Wang, Shiyi; Zhan, Qiwen; Luo, Jingdong; Jen, Alex K -Y; Chung, Chi-jui; Yan, Hai; Pan, Zeyu; Nelson, Robert L; Lee, Charles Y -C; Chen, Ray T

    2015-01-01

    In this work, we design, fabricate and characterize a compact, broadband and highly sensitive integrated photonic electromagnetic field sensor based on a silicon-organic hybrid modulator driven by a bowtie antenna. The large electro-optic (EO) coefficient of organic polymer, the slow-light effects in the silicon slot photonic crystal waveguide (PCW), and the broadband field enhancement provided by the bowtie antenna, are all combined to enhance the interaction of microwaves and optical waves, enabling a high EO modulation efficiency and thus a high sensitivity. The modulator is experimentally demonstrated with a record-high effective in-device EO modulation efficiency of r33=1230pm/V. Modulation response up to 40GHz is measured, with a 3-dB bandwidth of 11GHz. The slot PCW has an interaction length of 300um, and the bowtie antenna has an area smaller than 1cm2. The bowtie antenna in the device is experimentally demonstrated to have a broadband characteristics with a central resonance frequency of 10GHz, as we...

  13. Binary Intensity Modulation and Hybrid Ternary Modulation Applied to Multiplexing Objects Using Holographic Data Storage on a PVA/AA Photopolymer

    Directory of Open Access Journals (Sweden)

    Elena Fernandez

    2014-01-01

    Full Text Available Holographic data pages were multiplexed in a polyvinyl alcohol/acrylamide photopolymer and a liquid crystal device was used to modify the object beam and store objects in the material. A peristrophic multiplexing method was used to store a large number of objects in the same spot of the material. The objects were stored using two different modulations: binary intensity modulation and hybrid ternary modulation. Moreover, the bit error rate (BER of the images was calculated in order to compare which modulation is most appropriate to be used for holographic data storage.

  14. Magneto-optic transmittance modulation observed in a hybrid graphene–split ring resonator terahertz metasurface

    Energy Technology Data Exchange (ETDEWEB)

    Zanotto, Simone; Pitanti, Alessandro [NEST, Istituto Nanoscienze–CNR and Scuola Normale Superiore, Piazza San Silvestro 12, 56127 Pisa (Italy); Lange, Christoph; Maag, Thomas; Huber, Rupert [Department of Physics, University of Regensburg, 93040 Regensburg (Germany); Miseikis, Vaidotas; Coletti, Camilla [CNI@NEST, Istituto Italiano di Tecnologia, P.za S. Silvestro 12, 56127 Pisa (Italy); Degl' Innocenti, Riccardo [Cavendish Laboratory, University of Cambridge, J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Baldacci, Lorenzo [Scuola Superiore Sant' Anna, Institute of Life Sciences, P.za Martiri della Libertà 33, 56127 Pisa (Italy); Tredicucci, Alessandro [NEST, Istituto Nanoscienze-CNR and Dipartimento di Fisica “E. Fermi,” Università di Pisa, L.go Pontecorvo 3, 56127 Pisa (Italy)

    2015-09-21

    By placing a material in close vicinity of a resonant optical element, its intrinsic optical response can be tuned, possibly to a wide extent. Here, we show that a graphene monolayer, spaced a few tenths of nanometers from a split ring resonator metasurface, exhibits a magneto-optical response which is strongly influenced by the presence of the metasurface itself. This hybrid system holds promises in view of thin optical modulators, polarization rotators, and nonreciprocal devices, in the technologically relevant terahertz spectral range. Moreover, it could be chosen as the playground for investigating the cavity electrodynamics of Dirac fermions in the quantum regime.

  15. Directly modulated and fully tunable hybrid silicon lasers for future generation of coherent colorless ONU.

    Science.gov (United States)

    de Valicourt, G; Le Liepvre, A; Vacondio, F; Simonneau, C; Lamponi, M; Jany, C; Accard, A; Lelarge, F; Make, D; Poingt, F; Duan, G H; Fedeli, J-M; Messaoudene, S; Bordel, D; Lorcy, L; Antona, J-C; Bigo, S

    2012-12-10

    We propose and demonstrate asymmetric 10 Gbit/s upstream--100 Gbit/s downstream per wavelength colorless WDM/TDM PON using a novel hybrid-silicon chip integrating two tunable lasers. The first laser is directly modulated in burst mode for upstream transmission over up to 25 km of standard single mode fiber and error free transmission over 4 channels across the C-band is demonstrated. The second tunable laser is successfully used as local oscillator in a coherent receiver across the C-band simultaneously operating with the presence of 80 downstream co-channels.

  16. Ultrabroadband Electro-Optic Modulator Based on Hybrid Silicon-Polymer Dual Vertical Slot Waveguide

    Directory of Open Access Journals (Sweden)

    Shouyuan Shi

    2011-01-01

    Full Text Available We present a novel hybrid silicon-polymer dual slot waveguide for high speed and ultra-low driving voltage electro-optic (EO modulation. The proposed design utilizes the unique properties of ferroelectric materials such as LiNbO3 to achieve dual RF and optical modes within a low index nanoslot. The tight mode concentration and overlap in the slot allow the infiltrated organic EO polymers to experience enhanced nonlinear interaction with the applied electric field. Half-wavelength voltage-length product and electro-optic response are rigorously simulated to characterize the proposed design, which reveals ultrabroadband operation, up to 250 GHz, and subvolt driving voltage for a 1 cm long modulator.

  17. Using multimedia learning modules in a hybrid-online course in electricity and magnetism

    Science.gov (United States)

    Sadaghiani, Homeyra R.

    2011-06-01

    We have been piloting web-based multimedia learning modules (MLMs), developed by the Physics Education Research Group at the University of Illinois at Urbana Champaign (UIUC), as a “prelecture assignment” in several introductory physics courses at California State Polytechnic University at Pomona. In this study, we report the results from a controlled study utilizing modules on electricity and magnetism as a part of a blended hybrid-online course. We asked students in the experimental section to view the MLMs prior to attending the face-to-face class, and to make sure this would not result in additional instructional time, we reduced the weekly class time by one-third. We found that despite reduced class time, student-learning outcomes were not hindered; in fact, the implementation of the UIUC MLMs resulted in a positive effect on student performance on conceptual tests and classroom discussion questions.

  18. A modular molecular photovoltaic system based on phospholipid/alkanethiol hybrid bilayers: photocurrent generation and modulation.

    Science.gov (United States)

    Xie, Hong; Jiang, Kai; Zhan, Wei

    2011-10-21

    Monolayer quantities of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), incorporated with either fullerenes or ruthenium tris(bipyridyl) (Ru(bpy)(3)(2+)) complexes, were formed on ferrocene-terminated C11-alkanethiol self-assembled monolayers (SAMs) through lipid fusion. Thus formed hybrid structures are characterized by quartz crystal microbalance, UV-vis spectroscopy, cyclic voltammetry and impedance analysis. In comparison to lipid monolayers deposited on C12-alkanethiol SAMs, photocurrent generation from these ferrocene-based structures is significantly modulated, displaying attenuated anodic photocurrents and enhanced cathodic photocurrents. While a similar trend was observed for the two photoagents studied, the degree of such modulations was always found to be greater in fullerene-incorporated bilayers. These findings are evaluated in the context of the film structure, energetics of the involved photo(electrochemical) species and cross-membrane electron-transfer processes.

  19. Using multimedia learning modules in a hybrid-online course in electricity and magnetism

    Directory of Open Access Journals (Sweden)

    Homeyra R. Sadaghiani

    2011-03-01

    Full Text Available We have been piloting web-based multimedia learning modules (MLMs, developed by the Physics Education Research Group at the University of Illinois at Urbana Champaign (UIUC, as a “prelecture assignment” in several introductory physics courses at California State Polytechnic University at Pomona. In this study, we report the results from a controlled study utilizing modules on electricity and magnetism as a part of a blended hybrid-online course. We asked students in the experimental section to view the MLMs prior to attending the face-to-face class, and to make sure this would not result in additional instructional time, we reduced the weekly class time by one-third. We found that despite reduced class time, student-learning outcomes were not hindered; in fact, the implementation of the UIUC MLMs resulted in a positive effect on student performance on conceptual tests and classroom discussion questions.

  20. Simulation Research and Performance Analysis of Parameters in Spread Spectrum Communication%扩频通信中过程参数的仿真研究与性能分析

    Institute of Scientific and Technical Information of China (English)

    韩建; 魏运锋; 谈卿瑕; 赵晓丹

    2014-01-01

    扩频通信是现代通信系统中不可或缺的部分,用扩展频谱的方式可换取信噪比增益,从而提高通信系统的抗干扰能力。构建出直扩通信系统,通过示波器观察信号在传输过程中波形和频谱的变化,以验证是否实现扩频解扩功能;通过误码率的监测,验证了直扩系统抗高斯白噪声干扰和单频正弦波干扰的能力并进行分析。%The spread spectrum communication is indispensable in modern communication system , and the SNR gain can be reached through spread spectrum so as to improve anti-interference ability of the communica-tion system .A DSSS communication system was constructed and making use of the oscilloscope , the signal ’ s waveform and frequency spectrum changes in transmission were observed to verify spread spectrum algorithm functions .Error rate monitoring proves the spread spectrum system ’ s capability of resisting Gaussian white noise interference and single frequency sine wave interference .

  1. Development of a new lower hybrid antenna module using a poloidal power divider

    Energy Technology Data Exchange (ETDEWEB)

    Maebara, Sunao; Seki, Masami; Suganuma, Kazuaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1996-07-01

    The antenna using poloidal power divider is an effective method for simplification of Lower Hybrid Current Drive (LHCD) antenna system. This method should allow to reduce the power density in the antenna while maintaining a good flexibility of N{sub parallel} spectrum of waves. For this purpose, three types of poloidal power divider which split the power in three, and the 3 x 6 multi-junction module were developed. r.f. properties and outgassing of these components were evaluated using the CEA Cadarache RF Test Facility. A good power dividing ratio of 33 {+-} 4% was obtained for each of these poloidal dividers, and the reflection coefficient was lower value than 1.5%. For the 3 x 6 multi-junction, reflection coefficient was less than 1.3% and r.f. losses lower than 1.0% were measured. On the other hand, it was found in the scattering matrix analysis that reflection coefficient at plasma has to be less than a few % in order to operate these components under available conditions. In combination with two poloidal power dividers connected to the 3 x 6 multi-junction module, quasi stationary operation for r.f. injection time of 1000 sec at 300 kW was demonstrated under water cooling. In this case, it was found that the outgassing rate is in the lower range of 10{sup -7}Pam{sup 3}s{sup -1}m{sup -2} within the maximum module temperature of {approx}100degC. This report describes the experimental and analytical results of a new lower hybrid (LH) antenna module using the poloidal power divider. (author)

  2. Robust statistical methods for impulse noise suppressing of spread spectrum induced polarization data, with application to a mine site, Gansu province, China

    Science.gov (United States)

    Liu, Weiqiang; Chen, Rujun; Cai, Hongzhu; Luo, Weibin

    2016-12-01

    In this paper, we investigated the robust processing of noisy spread spectrum induced polarization (SSIP) data. SSIP is a new frequency domain induced polarization method that transmits pseudo-random m-sequence as source current where m-sequence is a broadband signal. The potential information at multiple frequencies can be obtained through measurement. Removing the noise is a crucial problem for SSIP data processing. Considering that if the ordinary mean stack and digital filter are not capable of reducing the impulse noise effectively in SSIP data processing, the impact of impulse noise will remain in the complex resistivity spectrum that will affect the interpretation of profile anomalies. We implemented a robust statistical method to SSIP data processing. The robust least-squares regression is used to fit and remove the linear trend from the original data before stacking. The robust M estimate is used to stack the data of all periods. The robust smooth filter is used to suppress the residual noise for data after stacking. For robust statistical scheme, the most appropriate influence function and iterative algorithm are chosen by testing the simulated data to suppress the outliers' influence. We tested the benefits of the robust SSIP data processing using examples of SSIP data recorded in a test site beside a mine in Gansu province, China.

  3. A study on reception electrodes for the vital-sign monitor using near-field intra-body communication enhanced by spread spectrum technique.

    Science.gov (United States)

    Kobayashi, Takumi; Shimatani, Yuichi; Kyoso, Masaki

    2013-01-01

    As a novel vital sign monitor, we have developed wireless ECG monitoring system with Near-field intra-body communication (NF-IBC) technique. However, it was hard to ensure communication reliability because transmission channel is noisy and unstable. In order to solve the problem, we utilize spread spectrum (SS), which is known as robust communication technique even through poor transmission channel. In previous study, we have already developed an ECG monitor using NF-IBC enhanced by SS. In this paper, we evaluated on structure of the reception electrode for reliable communication. Based on the evaluations with bit error rate, we suggested the reception electrode structure which can keep the communication reliability. As the results we considered that we can expand the reception electrode up to 2.25 m(2). Moreover, we proposed the structure of the reception electrodes that can keep the communication reliability. Finally we suggested how to use the SS NF-IBC vital-sign monitor in room that larger than 2.25 m(2), and we had shown the practicability of the systems.

  4. Double-Slot Hybrid Plasmonic Ring Resonator Used for Optical Sensors and Modulators

    Directory of Open Access Journals (Sweden)

    Xu Sun

    2015-11-01

    Full Text Available An ultra-high sensitivity double-slot hybrid plasmonic (DSHP ring resonator, used for optical sensors and modulators, is developed. Due to high index contrast, as well as plasmonic enhancement, a considerable part of the optical energy is concentrated in the narrow slots between Si and plasmonic materials (silver is used in this paper, which leads to high sensitivity to the infiltrating materials. By partial opening of the outer plasmonic circular sheet of the DSHP ring, a conventional side-coupled silicon on insulator (SOI bus waveguide can be used. Experimental results demonstrate ultra-high sensitivity (687.5 nm/RIU of the developed DSHP ring resonator, which is about five-times higher than for the conventional Si ring with the same geometry. Further discussions show that a very low detection limit (5.37 × 10−6 RIU can be achieved after loaded Q factor modifications. In addition, the plasmonic metal structures offer also the way to process optical and electronic signals along the same hybrid plasmonic circuits with small capacitance (~0.275 fF and large electric field, which leads to possible applications in compact high-efficiency electro-optic modulators, where no extra electrodes for electronic signals are required.

  5. Simulation and Design of Synchronized Reception Technology based on Spread Spectrum System%基于扩频通信系统接收同步技术的仿真设计

    Institute of Scientific and Technical Information of China (English)

    黄凌霄

    2014-01-01

    扩频系统接收机的好坏直接决定了整个通信系统的性能。在直接序列扩频通信系统的基础上,提出了一种位同步方法,结合科斯塔斯(Costas)环的载波同步方法和数字匹配滤波器的扩频码同步方法,建立了直接序列扩频通信系统模型。最后,采用MATLAB R2006 b/SIMULINK工具,对该系统进行整体仿真。本系统经过仿真,验证其正确性,为以扩频通信为基础的现代通信的研究和设计提供参考。%The quality of spread spectrum receiver directly determines the performance of the whole communi-cation system .Based on the communication system of DSSS ( Direct Sequence Spread Spectrum ) , this paper propo-ses a bit-synchronization method and builds a communication system model of DSSS , combining the carrier-synchro-nization method of Costas loop and the spread spectrum code-synchronization method of DMF ( Digital Matched Fil-ter).At last, simulation of spread spectrum system is implemented with MATLAB R 2006b.The simulation result shows that this communication system is precise and has some reference significance for the simulation and design of modern communication system based on spread spectrum communication .

  6. Spread Spectrum Mobile Radio Communications.

    Science.gov (United States)

    1984-09-15

    seconds, yielding Z Y a =XMZ m M .-m The sequence of operacions is illustrated by the matrices of figures ’--3- and 1-3b. Each matrix is either a...sequence of K-bit numbers (code word, address, detection matrix) or a frequency-time spectrogram (traasmit spectrum, receive spectrum). The matrices pertain...and a reduced rank-sum receiver. In figure 3-1, we show the operation of a MRSR by means of matrices . 3-1 Reduced Rank-Sum Receiver With the values of

  7. PF/CLAY hybrid materials: a simple method to modulate the optical properties

    Directory of Open Access Journals (Sweden)

    Marcio Chao Chen Em

    2016-02-01

    Full Text Available Abstract The aim of this work was modulate the emission properties and improve thermal stability of a conjugated polymer incorporated into an inorganic matrix. Hybrid material was prepared based on poly(9,9-dioctylfluorene-co-phenylene (PF and montmorillonite (Na+Mt clay using wet impregnation of 10, 30 and 50 wt.% of PF into Na+Mt and Na+Mt intercalated with ammonium quaternary salts (hexadecyltrimethylammonium — HDTMA in a different proportions (OMt-1 and OMt-2. The materials were characterized by infrared and UV-Vis spectroscopy, fluorescence, X-ray diffratometry and thermogravimetry analysis. The results show that the presence of the clay alters the photoluminescent and thermal properties. Nevertheless, the degree of the clay organophilization and the clay content influences the luminescent properties due to the diverse interaction behavior between the polymer and clay. The sodium clay acted only as dispersing agent since no intercalation process occurs and the emission displacement is assigned to this behavior. In this case the PF emission displace from 402 to 395 nm. A nonlinear displacement is observed for PF/OMt-2 due the difficulties to conclude if the intercalation of the polymer occurs (379, 403 and 412 for hybrid with 10, 30 and 50%, respectively. For PF/OMt-1 a higher displacements for lower wavelength is observed due to intercalation of polymer chains and subsequent isolation in the interlamellar space, especially with material with 10 and 30% of PF in the hybrid material, whose displacement reached to 360 nm. All these results show that is possible to try to control the emission of the conjugated hybrid material changing the rate of the material.

  8. Design and construction of a VHGT-attached WDM-type triplex transceiver module using polymer PLC hybrid integration technology

    Science.gov (United States)

    Jerábek, Vitezslav; Hüttel, Ivan; Prajzler, Václav; Busek, K.; Seliger, P.

    2008-11-01

    We report about design and construction of the bidirectional transceiver TRx module for subscriber part of the passive optical network PON for a fiber to the home FTTH topology. The TRx module consists of a epoxy novolak resin polymer planar lightwave circuit (PLC) hybrid integration technology with volume holographic grating triplex filter VHGT, surface-illuminated photodetectors and spot-size converted Fabry-Pérot laser diode in SMD package. The hybrid PLC has composed from a two parts-polymer optical waveguide including VHGT filter section and a optoelectronic microwave section. The both parts are placed on the composite substrate.

  9. Analysis of SDWDM Ring Network and Enhancement Using Different Hybrid Optical Amplifiers and Modulation Formats

    Science.gov (United States)

    Anand, Vineet; Sharma, Anurag

    2016-09-01

    In this paper, performance enhancement of super-dense wavelength division multiplexing (SDWDM) optical add-drop multiplexer optical ring network for six nodes, 50 wavelengths having channel spacing of 0.2 nm for 300 km unidirectional nonlinear fiber is successfully demonstrated. The performance of the designed system is enhanced by comparing different modulation formats (non-return to zero (NRZ), return to zero (RZ), soliton, chirped return to zero (CRZ), carrier-suppressed RZ (CSRZ)) and hybrid amplifiers (Erbium-doped fiber amplifier (EDFA)-EDFA, semiconductor optical amplifier (SOA)-SOA, SOA, EDFA, EDFA-SOA) on the basis of eye diagram and bit error rate (BER). It has been observed that CRZ modulation format and EDFA-SOA shows the best results. It has been reported that EDFA-SOA/CRZ modulation format can achieve BER as better as e-13, which gives best performance. The effect of channel spacing on SDWDM system and performance degradation due to crosstalk is also evaluated.

  10. Mesoporous sol-gel silica cladding for hybrid TiO2/electro-optic polymer waveguide modulators.

    Science.gov (United States)

    Enami, Yasufumi; Kayaba, Yasuhisa; Luo, Jingdong; Jen, Alex K-Y

    2014-06-30

    We report the efficient poling of an electro-optic (EO) polymer in a hybrid TiO(2)/electro-optic polymer multilayer waveguide modulator on mesoporous sol-gel silica cladding. The mesoporous sol-gel silica has nanometer-sized pores and a low refractive index of 1.24, which improves mode confinement in the 400-nm-thick EO polymer film in the modulators and prevents optical absorption from the lower Au electrode, thereby resulting in a lower half-wave voltage of the modulators. The half-wave voltage (Vπ) of the hybrid modulator fabricated on the mesoporous sol-gel silica cladding is 6.0 V for an electrode length (Le) of 5 mm at a wavelength of 1550 nm (VπLe product of 3.0 V·cm) using a low-index guest-host EO polymer (in-device EO coefficient of 75 pm/V).

  11. Hybrid semiconductor-dielectric metamaterial modulation for switchable bi-directional THz absorbers

    Science.gov (United States)

    Le, Ly Nguyen; Thang, Nguyen Manh; Thuy, Le Minh; Tung, Nguyen Thanh

    2017-01-01

    There is an increasing interest for electromagnetic metamaterials that show mutable absorption properties with real-time and dynamic control. In this paper, we investigate a modulation of bi-directional metamaterial absorbers that is thermally switchable at terahertz frequencies. The metamaterial absorber is composed of symmetric hybrid semiconductor-dielectric cut-wire-pair structures, whose electromagnetic responses can be actively manipulated by utilizing an external heat source. As increasing the temperature of metamaterials from 300 to 350 K, we demonstrate that the magnetic resonance can be systematically blue-shifted and overlapped with the electric resonance, which is unaffectedly settled at about 0.8 THz. This superposition provides an effective mechanism to control the absorption intensity from 43% to nearly 95%. Finite integration simulation technique, standard retrieval method, and equivalent circuit model are employed to elaborate our idea.

  12. Investigation of lower hybrid physics through power modulation experiments on Alcator C-Moda)

    Science.gov (United States)

    Schmidt, A.; Bonoli, P. T.; Meneghini, O.; Parker, R. R.; Porkolab, M.; Shiraiwa, S.; Wallace, G.; Wright, J. C.; Harvey, R. W.; Wilson, J. R.

    2011-05-01

    Lower hybrid current drive (LHCD) is an attractive tool for off-axis current profile control in magnetically confined tokamak plasmas and burning plasmas (ITER), because of its high current drive efficiency. The LHCD system on Alcator C-Mod operates at 4.6 GHz, with ~ 1 MW of coupled power, and can produce a wide range of launched parallel refractive index (n||) spectra. A 32 chord, perpendicularly viewing hard x-ray camera has been used to measure the spatial and energy distribution of fast electrons generated by lower hybrid (LH) waves. Square-wave modulation of LH power on a time scale much faster than the current relaxation time does not significantly alter the poloidal magnetic field inside the plasma and thus allows for realistic modeling and consistent plasma conditions for different n|| spectra. Inverted hard x-ray profiles show clear changes in LH-driven fast electron location with differing n||. Boxcar binning of hard x-rays during LH power modulation allows for ~ 1 ms time resolution which is sufficient to resolve the build-up, steady-state, and slowing-down phases of fast electrons. Ray-tracing/Fokker-Planck modeling in combination with a synthetic hard x-ray diagnostic shows quantitative agreement with the x-ray data for high n|| cases. The time histories of hollow x-ray profiles have been used to measure off-axis fast electron transport in the outer half of the plasma, which is found to be small on a slowing down time scale.

  13. Formation of lower-hybrid solitary structures by modulational interaction between lower-hybrid and dispersive Alfvén waves

    Directory of Open Access Journals (Sweden)

    J. O. Hall

    2009-03-01

    Full Text Available We investigate the possibility that lower-hybrid solitary structures (LHSS, which are frequently observed in the Earth's ionosphere and magnetosphere, are formed as a result of a modulational interaction between lower-hybrid and dispersive Alfvén waves of initially small amplitude. A large amplitude lower-hybrid pump wave can excite density structures with length scales transverse to the geomagnetic field of the order of the ion gyroradius via a modulational instability. The structure formation in the nonlinear stage of the instability is investigated by numerical solutions of the governing equations, using plasma parameters relevant for LHSS observations in the upper ionosphere and in the magnetosphere. The numerical solutions reveal that the lower-hybrid waves become self-localized inside cylindrically symmetric (with respect to the ambient magnetic field density cavities, in qualitative agreement with observations. Our model includes thermal electron effects but shows no stabilization at the ion sound gyroradius, suggesting that any preference of observed LHSS for that perpendicular scale likely is due to processes arresting the cavity collapse.

  14. A Modulated Hybrid Filter Bank for Wide-Band Analog-to-Digital Converters

    Directory of Open Access Journals (Sweden)

    Chunyan Yuan

    2014-04-01

    Full Text Available It is difficult to use a single analog-to-digital conversion (ADC to satisfy the requirements for conversion of an ultra-wideband signal. A parallel architecture for high bandwidth ADC, named cosine modulated hybrid filter bank, is presented to address this problem. First, the proposed architecture shifts the input signal spectrum by means of mixers. The modulated signal is channelized into smaller frequency subband signals using identical lowpass analog filters. Then the subband signals are digitized through identical narrowband ADCs, respectively. Finally, the digitized signals are up-sampled, then filtered and combined to reconstruct the digital representation of the original wide-band input signal. The digital filters are designed to use the eigenfilter method based on total least squares error criterion. Since the sample-and-hold circuits needed are only identical narrowband baseband circuits, the simplicity of the system makes the design easier and cheaper. Several design examples are used to illustrate the performance of the proposed system.

  15. Online Junction Temperature Cycle Recording of an IGBT Power Module in a Hybrid Car

    Directory of Open Access Journals (Sweden)

    Marco Denk

    2015-01-01

    Full Text Available The accuracy of the lifetime calculation approach of IGBT power modules used in hybrid-electric powertrains suffers greatly from the inaccurate knowledge of application typical load-profiles. To verify the theoretical load-profiles with data from the field this paper presents a concept to record all junction temperature cycles of an IGBT power module during its operation in a test vehicle. For this purpose the IGBT junction temperature is measured with a modified gate driver that determines the temperature sensitive IGBT internal gate resistor by superimposing the negative gate voltage with a high-frequency identification signal. An integrated control unit manages the TJ measurement during the regular switching operation, the exchange of data with the system controller, and the automatic calibration of the sensor system. To calculate and store temperature cycles on a microcontroller an online Rainflow counting algorithm was developed. The special feature of this algorithm is a very accurate extraction of lifetime relevant information with a significantly reduced calculation and storage effort. Until now the recording concept could be realized and tested within a laboratory voltage source inverter. Currently the IGBT driver with integrated junction temperature measurement and the online cycle recording algorithm is integrated in the voltage source inverter of first test vehicles. Such research will provide representative load-profiles to verify and optimize the theoretical load-profiles used in today’s lifetime calculation.

  16. Performance Analysis and Simulation of M-ary Direct Sequence Spread Spectrum System%多进制直接序列扩频系统性能分析及仿真

    Institute of Scientific and Technical Information of China (English)

    夏高峰; 罗宇; 金哲仕

    2015-01-01

    Spread spectrum system can effectively improve the anti-jamming capability of communication systems;and it has been widely applied in military communication systems as well as in civilian communication systems. M-ary direct sequence spread spectrum system has its unique advantages and is proven widely applicable. This paper studies on M-ary Direct Sequence Spread Spectrum System, and introduces the theory, the performance and channel coding. Results of performance analysis and simulation indicate that the M-ary direct sequence spread spectrum system has good performance and can be applied to bandwidth constrained systems.%扩频技术能有效提高通信系统抗干扰能力,因此在军事通信及民用通信领域得到了广泛应用。多进制直接序列扩频相对于直接序列扩频具有其特有的优势和较强的实际应用背景。本文对多进制正交扩频系统进行研究,介绍了多进制直接序列扩频的原理、分析了多进制直接扩频系统的误码性能,并研究了适合多进制直接扩频系统的信道编解码。仿真结果表明,多进制扩频具有良好的性能,适合带宽受限系统。

  17. Integration of variable-rate OWC with OFDM-PON for hybrid optical access based on adaptive envelope modulation

    Science.gov (United States)

    Chen, Chen; Zhong, Wen-De; Wu, Dehao

    2016-12-01

    In this paper, we investigate an integrated optical wireless communication (OWC) and orthogonal frequency division multiplexing based passive optical network (OFDM-PON) system for hybrid wired and wireless optical access, based on an adaptive envelope modulation technique. Both the outdoor and indoor wireless communications are considered in the integrated system. The data for wired access is carried by a conventional OFDM signal, while the data for wireless access is carried by an M-ary pulse amplitude modulation (M-PAM) signal which is modulated onto the envelope of a phase-modulated OFDM signal. By adaptively modulating the wireless M-PAM signal onto the envelope of the wired phase-modulated constant envelope OFDM (CE-OFDM) signal, hybrid wired and wireless optical access can be seamlessly integrated and variable-rate optical wireless transmission can also be achieved. Analytical bit-error-rate (BER) expressions are derived for both the CE-OFDM signal with M-PAM overlay and the overlaid unipolar M-PAM signal, which are verified by Monte Carlo simulations. The BER performances of wired access, indoor OWC wireless access and outdoor OWC wireless access are evaluated. Moreover, variable-rate indoor and outdoor optical wireless access based on the adaptive envelope modulation technique is also discussed.

  18. 多进制正交扩频技术在矿井下的应用%Application of M-ary orthogonal spread spectrum technique in underground mines

    Institute of Scientific and Technical Information of China (English)

    常树龙; 李珂

    2014-01-01

    针对传统的通信方式无法适用于矿井下的复杂环境,采用多进制正交扩频技术实现矿井下通信。通过对多进制正交扩频系统性能的仿真和分析,多进制正交扩频通信系统具有抗干扰能力强、传输距离远和自适应性强等优点,具有广泛的应用性,适应于矿井下进行通信。%Traditional communication modes aren't applicable to the complex environment in underground mines, An M-ary orthogonal spread spectrum system is proposed to solve this problem in this paper, Through simulating and analyzing the performance of an orthogonal spread spectrum system, it has advantages of high anti-interference, long transmission distance and strong adaptability, orthogonal spread spectrum systems have been successfully applied in many areas, especially suitable for communication in underground mines.

  19. Optical protein modulation via quantum dot coupling and use of a hybrid sensor protein.

    Science.gov (United States)

    Griep, Mark; Winder, Eric; Lueking, Donald; Friedrich, Craig; Mallick, Govind; Karna, Shashi

    2010-09-01

    Harnessing the energy transfer interactions between the optical protein bacteriorhodopsin (bR) and CdSe/ZnS quantum dots (QDs) could provide a novel bio-nano electronics substrate with a variety of applications. In the present study, a polydimethyldiallyammonium chloride based I-SAM technique has been utilized to produce bilayers, trilayers and multilayers of alternating monolayers of bR, PDAC and QD's on a conductive ITO substrate. The construction of multilayer systems was directly monitored by measuring the unique A570 nm absorbance of bR, as well as QD fluorescence emission. Both of these parameters displayed a linear relationship to the number of monolayers present on the ITO substrate. The photovoltaic response of bilayers of bR/PDAC was observed over a range of 3 to 12 bilayers and the ability to efficiently create an electrically active multilayered substrate composed of bR and QDs has been demonstrated for the first time. Evaluation of QD fluorescence emission in the multilayer system strongly suggests that FRET coupling is occurring and, since the I-SAM technique provide a means to control the bR/QD separation distance on the nanometer scale, this technique may prove highly valuable for optimizing the distance dependent energy transfer effects for maximum sensitivity to target molecule binding by a biosensor. Finally, preliminary studies on the production of a sensor protein/bR hybrid gene construct are presented. It is proposed that the energy associated with target molecule binding to a hybrid sensor protein would provide a means to directly modulate the electrical output from a sensor protein/bR biosensor platform.

  20. Regulation of responsiveness of phosphorescence toward dissolved oxygen concentration by modulating polymer contents in organic-inorganic hybrid materials.

    Science.gov (United States)

    Okada, Hiroshi; Tanaka, Kazuo; Chujo, Yoshiki

    2014-06-15

    Platinum(II) octaethylporphyrin (PtOEP)-loaded organic-inorganic hybrids were obtained via the microwave-assisted sol-gel condensation with methyltrimethoxysilane and poly(vinylpyrrolidone). From transparent and homogeneous hybrid films, the strong phosphorescence from PtOEP was observed. Next, the resulting hybrids were immersed in the aqueous buffer, and the emission intensity was monitored by changing the dissolved oxygen level in the buffer. When the hybrid with relatively-higher amount of the silica element, the strong phosphorescence was observed even under the aerobic conditions. In contrast, the emission from the hybrids with lower amounts of the silica element was quenched under the hypoxic conditions. This is, to the best of our knowledge, the first example to demonstrate that the responsiveness of the phosphorescence intensity of PtOEP in hybrid films to the dissolved oxygen concentration in water can be modulated by changing the percentage of the contents in the material. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Hybrid pulse position modulation and binary phase shift keying subcarrier intensity modulation for free space optics in a weak and saturated turbulence channel.

    Science.gov (United States)

    Faridzadeh, Monire; Gholami, Asghar; Ghassemlooy, Zabih; Rajbhandari, Sujan

    2012-08-01

    In this paper a hybrid modulation scheme based on pulse position modulation (PPM) and binary phase shift keying subcarrier intensity modulation (BPSK-SIM) schemes for free-space optical communications is proposed. The analytical bit error rate (BER) performance is investigated in weak and saturated turbulence channels and results are verified with the simulation data. Results show that performance of PPM-BPSK-SIM is superior to BPSK-SIM in all turbulence regimes; however, it outperforms 2-PPM for the turbulence variance σ(1)(2)>0.2. PPM-BPSK-SIM offers a signal-to-noise ratio (SNR) gain of 50 dB in the saturation regime compared to BPSK at a BER of 10(-6). The SNR gain in comparison to PPM improves as the strength of the turbulence level increases.

  2. Morphing hybrid honeycomb (MOHYCOMB) with in situ Poisson’s ratio modulation

    Science.gov (United States)

    Heath, Callum J. C.; Neville, Robin M.; Scarpa, Fabrizio; Bond, Ian P.; Potter, Kevin D.

    2016-08-01

    Electrostatic adhesion can be used as a means of reversible attachment. Through application of high voltage (~2 kV) across closely spaced parallel plate electrodes, significant shear stresses (11 kPa) can be generated. The highest levels of electrostatic holding force can be achieved through close contact of connection surfaces; this is facilitated by flexible electrodes which can conform to reduce air gaps. Cellular structures are comprised of thin walled elements, making them ideal host structures for electrostatic adhesive elements. The reversible adhesion provides control of the internal connectivity of the cellular structure, and determines the effective cell geometry. This would offer variable stiffness and control of the effective Poisson’s ratio of the global cellular array. Using copper-polyimide thin film laminates and PVDF thin film dielectrics, double lap shear electrostatic adhesive elements have been introduced to a cellular geometry. By activating different groups of reversible adhesive interfaces, the cellular array can assume four different cell configurations. A maximum stiffness modulation of 450% between the ‘All off’ and ‘All on’ cell morphologies has been demonstrated. This structure is also capable of in situ effective Poisson’s ratio variations, with the ability to switch between values of -0.45 and 0.54. Such a structure offers the potential for tuneable vibration absorption (due to its variable stiffness properties), or as a smart honeycomb with controllable curvature and is termed morphing hybrid honeycomb.

  3. Comparison of hybrid volumetric modulated arc therapy (VMAT technique and double arc VMAT technique in the treatment of prostate cancer

    Directory of Open Access Journals (Sweden)

    Amaloo Christopher

    2015-09-01

    Full Text Available Background. Volumetric modulated arc therapy (VMAT has quickly become accepted as standard of care for the treatment of prostate cancer based on studies showing it is able to provide faster delivery with adequate target coverage and reduced monitor units while maintaining organ at risk (OAR sparing. This study aims to demonstrate the potential to increase dose conformality with increased planner control and OAR sparing using a hybrid treatment technique compared to VMAT.

  4. The electronics hybrid of the ATLAS-SCT endcap detector modules

    CERN Document Server

    Ketterer, C

    2004-01-01

    An electronics hybrid has been developed for the ATLAS silicon microstrip tracker endcaps. The high-density interconnect board carries 12 readout ASICs, as well as ASICs for the optical data transmission. Special requirements are that this hybrid has to be double sided, radiation hard, and low mass. A six-layer flexible circuit in copper-polyimide technology has been chosen for this purpose. It is folded around a highly heat conducting carbon-carbon composite substrate to form the rigid double-sided hybrid. Adequate thermal, mechanical, and electrical performance of the hybrid has been demonstrated. The production of the hybrids started in May 2003. (12 refs).

  5. A 3.9 μs Settling-Time Fractional Spread-Spectrum Clock Generator Using a Dual-Charge-Pump Control Technique for Serial-ATA Applications

    OpenAIRE

    Takashi Kawamoto; Masato Suzuki; Takayuki Noto

    2015-01-01

    A low-jitter fractional spread-spectrum clock generator (SSCG) utilizing a fast-settling dual-charge-pump (CP) technique is developed for serial-advanced technology attachment (SATA) applications. The dual-CP architecture reduces a design area to 60% by shrinking an effective capacitance of a loop filter. Moreover, the settling-time is reduced by 4 μs to charge a current to the capacitor by only main-CP in initial period in settling-time. The SSCG is fabricated in a 0.13 μm CMOS and achieves ...

  6. 基于改良扩频技术的Contourlet域盲图像水印%Blind Image Watermarking in Contourlet Domain Based on Improved Modified Spread Spectrum Technique

    Institute of Scientific and Technical Information of China (English)

    杨胜利; 高隽; 孙锐

    2011-01-01

    提出了一种基于改良扩频技术的Contourlet盲图像水印算法.将二值水印图像经Arnold置乱后进行双极性映射,然后通过IMSS(Irnproved Modified Spread Spectrum)系统嵌入到宿主图像Contourlet域次高阶方向子带中能量最大的子带纹理最丰富的位置上,检测端采用相关检测并设置一最佳阈值来判决水印存在与否.实验结果表明该方案不仅具有很好的透明性,而且在常规的图像处理和攻击下比传统扩频水印有更强的鲁棒性,同时也克服了传统扩频水印在检测无水印图像时完全失败的缺点.%A blind image watermarking algorithm in contourlet domain based on improved modified spread spectrum(IMSS) technique is proposed. The original binary watermark is firstly scrambled by two-dimensional Arnold transform and mapped from unipolarity to bipolarity, and then embedded into the richest textured region of the subband, which has the maximum energy among the second biggest directional subbands of the host image decomposed by the contourlet transform. Meanwhile, the IMSS technique is adopted in the process of watermark embedding.The watermark embedded is retrieved by computing the correlation between the watermarked coefficients and the pseudo random sequences. The optimal threshold is calculated to determine the existence of the watermark in the correlation detector. Experimental results demonstrate that the proposed algorithm not only has good imperceptibility but also has higher robustness against common image processing and attacks than conventional SS (spread spectrum) watermarking;furthermore, it overcomes the major disadvantage of conventional SS watermarking which completely fails ifthe tested image is pure.

  7. Hybrid Windows and Mosaic Video: Reducing Complexity of Space Habitable Modules Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Windows in habitable modules represent significant design and operations impacts to future spacecraft, yet viewing requirements, both electronic and passive,...

  8. Broadband energy-efficient optical modulation by hybrid integration of silicon nanophotonics and organic electro-optic polymer

    CERN Document Server

    Zhang, Xingyu; Subbaraman, Harish; Luo, Jingdong; Jen, Alex K -Y; Chung, Chi-jui; Yan, Hai; Pan, Zeyu; Nelson, Robert L; Chen, Ray T

    2015-01-01

    Silicon-organic hybrid integrated devices have emerging applications ranging from high-speed optical interconnects to photonic electromagnetic-field sensors. Silicon slot photonic crystal waveguides (PCWs) filled with electro-optic (EO) polymers combine the slow-light effect in PCWs with the high polarizability of EO polymers, which promises the realization of high-performance optical modulators. In this paper, a broadband, power-efficient, low-dispersion, and compact optical modulator based on an EO polymer filled silicon slot PCW is presented. A small voltage-length product of V{\\pi}*L=0.282Vmm is achieved, corresponding to an unprecedented record-high effective in-device EO coefficient (r33) of 1230pm/V. Assisted by a backside gate voltage, the modulation response up to 50GHz is observed, with a 3-dB bandwidth of 15GHz, and the estimated energy consumption is 94.4fJ/bit at 10Gbit/s. Furthermore, lattice-shifted PCWs are utilized to enhance the optical bandwidth by a factor of ~10X over other modulators bas...

  9. Passive hybridization of a photovoltaic module with lithium-ion battery cells: A model-based analysis

    Science.gov (United States)

    Joos, Stella; Weißhar, Björn; Bessler, Wolfgang G.

    2017-04-01

    Standard photovoltaic battery systems based on AC or DC architectures require power electronics and controllers, including inverters, MPP tracker, and battery charger. Here we investigate an alternative system design based on the parallel connection of a photovoltaic module with battery cells without any intermediate voltage conversion. This approach, for which we use the term passive hybridization, is based on matching the solar cell's and battery cell's respective current/voltage behavior. A battery with flat discharge characteristics can allow to pin the solar cell to its maximum power point (MPP) independently of the external power consumption. At the same time, upon battery full charge, voltage increase will drive the solar cell towards zero current and therefore self-prevent battery overcharge. We present a modeling and simulation analysis of passively hybridizing a 5 kWp PV system with a 5 kWh LFP/graphite lithium-ion battery. Dynamic simulations with 1-min time resolution are carried out for three exemplary summer and winter days using historic weather data and a synthetic single-family household consumer profile. The results demonstrate the feasibility of the system. The passive hybrid allows for high self-sufficiencies of 84.6% in summer and 25.3% in winter, which are only slightly lower than those of a standard system.

  10. Analysis of Hybrid-Integrated High-Speed Electro-Absorption Modulated Lasers Based on EM/Circuit Co-simulation

    DEFF Research Database (Denmark)

    Johansen, Tom Keinicke; Krozer, Viktor; Kazmierski, C.

    2009-01-01

    An improved electromagnetic simulation (EM) based approach has been developed for optimization of the electrical to optical (E/O) transmission properties of integrated electro-absorption modulated lasers (EMLs) aiming at 100 Gbit/s Ethernet applications. Our approach allows for an accurate analys...... of the EML performance in a hybrid microstrip assembly. The established EM-based approach provides a design methodology for the future hybrid integration of the EML with its driving electronics....

  11. Module-based Hybrid Uncertainty Quantification for Multi-physics Applications: Theory and Software

    Energy Technology Data Exchange (ETDEWEB)

    Tong, Charles [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chen, Xiao [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Iaccarino, Gianluca [Stanford Univ., CA (United States); Mittal, Akshay [Stanford Univ., CA (United States)

    2013-10-08

    In this project we proposed to develop an innovative uncertainty quantification methodology that captures the best of the two competing approaches in UQ, namely, intrusive and non-intrusive approaches. The idea is to develop the mathematics and the associated computational framework and algorithms to facilitate the use of intrusive or non-intrusive UQ methods in different modules of a multi-physics multi-module simulation model in a way that physics code developers for different modules are shielded (as much as possible) from the chores of accounting for the uncertain ties introduced by the other modules. As the result of our research and development, we have produced a number of publications, conference presentations, and a software product.

  12. Consequences of Reducing the Cost of PV Modules on a PV Wind Diesel Hybrid System with Limited Sizing Components

    Directory of Open Access Journals (Sweden)

    Jones S. Silva

    2012-01-01

    Full Text Available The use of renewable resources for power supply in family homes has passed the stage of utopia to became a reality, with limits set by technical and economic parameters. This paper presents the results of a project originated from the initiative of a middle-class family to achieve energy independence at home. The starting point was the concept of home with “zero energy” in which the total energy available is equal to the energy consumed. The solution devised to meet the energy demand of the residence in question is a PV wind diesel hybrid system connected to the grid, with the possibility of energy storage in batteries and in the form of heating water and the environment of the house. As a restriction, the family requested that the system would represent little impact to the lifestyle and landscape. This paper aims to assess the consequences of reductions in the cost of the PV modules on the optimization space, as conceived by the software Homer. The results show that for this system, a 50% reduction in the cost of PV modules allows all viable solutions including PV modules.

  13. Low-cost bidirectional hybrid fiber-visible laser light communication system based on carrier-less amplitude phase modulation

    Science.gov (United States)

    He, Jing; Dong, Huan; Deng, Rui; Chen, Lin

    2016-08-01

    We propose a bidirectional hybrid fiber-visible laser light communication (fiber-VLC) system. To reduce the cost of the system, the cheap and easy integration red vertical cavity surface emitting lasers, low-complexity carrier-less amplitude phase modulation format, and wavelength reuse technique are utilized. Meanwhile, the automatic gain control amplifier voltage and bias voltage for downlink and uplink are optimized. The simulation results show that, by using the proposed system, the bit error rate of 3.8×10-3 can be achieved for 16-Gbps CAP signal after 30-km standard single mode fiber and 8-m VLC bidirectional transmission. Therefore, it indicates the feasibility and potential of proposed system for indoor access network.

  14. Novel hierarchical tantalum oxide-PDMS hybrid coating for medical implants: One pot synthesis, characterization and modulation of fibroblast proliferation.

    Science.gov (United States)

    Tran, Phong A; Fox, Kate; Tran, Nhiem

    2017-01-01

    Surface properties such as morphology, roughness and charge density have a strong influence on the interaction of biomaterials and cells. Hierarchical materials with a combination of micron/submicron and nanoscale features for coating of medical implants could therefore have significant potential to modulate cellular responses and eventually improve the performance of the implants. In this study, we report a simple, one pot wet chemistry preparation of a hybrid coating system with hierarchical surface structures consisting of polydimethylsiloxane (PDMS) and tantalum oxide. Medical grade, amine functional PDMS was mixed with tantalum ethoxide which subsequently formed Ta2O5in situ through hydrolysis and condensation during coating process. The coatings were characterized by SEM, EDS, XPS, confocal scanning microscopy, contact angle measurement and in vitro cell culture. Varying PDMS and tantalum ethoxide ratios resulted in coatings of different surface textures ranging from smooth to submicro- and nano-structured. Strikingly, hierarchical surfaces containing both microscale (1-1.5μm) and nanoscale (86-163nm) particles were found on coatings synthesized with 20% and 40% (v/v) tantalum ethoxide. The coatings were similar in term of hydrophobicity but showed different surface roughness and chemical composition. Importantly, higher cell proliferation was observed on hybrid surface with hierarchical structures compared to pure PDMS or pure tantalum oxide. The coating process is simple, versatile, carried out under ambient condition and requires no special equipment.

  15. Using Multimedia Learning Modules in a Hybrid-Online Course in Electricity and Magnetism

    Science.gov (United States)

    Sadaghiani, Homeyra R.

    2011-01-01

    We have been piloting web-based multimedia learning modules (MLMs), developed by the Physics Education Research Group at the University of Illinois at Urbana Champaign (UIUC), as a "prelecture assignment" in several introductory physics courses at California State Polytechnic University at Pomona. In this study, we report the results…

  16. Using Multimedia Learning Modules in a Hybrid-Online Course in Electricity and Magnetism

    Science.gov (United States)

    Sadaghiani, Homeyra R.

    2011-01-01

    We have been piloting web-based multimedia learning modules (MLMs), developed by the Physics Education Research Group at the University of Illinois at Urbana Champaign (UIUC), as a "prelecture assignment" in several introductory physics courses at California State Polytechnic University at Pomona. In this study, we report the results from a…

  17. 伪随机码超声扩频在声学测温中的应用研究%Research of Acoustic Pyrometry Employing Pseudo-Random Sequence Ultrasonic Spread Spectrum

    Institute of Scientific and Technical Information of China (English)

    王琪; 王利军; 田亮

    2012-01-01

    Measuring times-of-flight( TOF) of acoustic waves is the key to reduce error in the acoustic pyrometry system, In order to improve the acoustic pyrometry system's quantity of anti-noisy under strong background noise in the boiler,referring to the pulse compression technology in radar, the realization method for ultrasonic spread spectrum TOF measurement based on the pseudo random binary sequence (PRBS) was introduced. Cross-correlation algorithm was used to calculate time delay between two signals which acquired from the sound transmitter and receiver separately. The time delay estimation of acoustic was experimented in the noisy condition. The results show that the ultrasonic spread spectrum TOF measurement based on PRBS signal has better precision, stability, and quantity of anti-noisy. The method has practical significance for improving acoustic temperature measurement accuracy.%声学测温技术中声波飞渡时间的测量是提高温度测量精度的关键.为了提高声波测温装置在锅炉强背景噪声下的抗干扰能力,借鉴雷达中的脉冲压缩技术,介绍了基于伪随机二进制序列的超声扩频测声波飞渡时间方法.利用信号处理技术中的互相关函数分析方法,计算声波发射端和接收端两路信号之间的时间延迟.在实验室加背景噪声的条件下,对声波时间延迟估计进行了实验研究.实验结果表明:伪随机码超声扩频测量飞渡时间具有较高的准确性、稳定性和抗干扰性能,该方法对提高声学测温精度具有实际意义.

  18. 基于面包师变换的抗剪切扩频水印算法研究%Research on spread spectrum watermarking algorithm resisting image-cropping based on baker's transformation

    Institute of Scientific and Technical Information of China (English)

    张鑫; 徐光宪; 付晓

    2012-01-01

    In order to improve the ability resisting image-cropping of spread spectrum watermarking, this paper proposed a new spread spectrum watermarking algorithm based on baker' s transformation. First, it did baker' s transform of the watermarking image to scramble it, then spread the image with a PN sequence so that it could get a watermarking sequence with the ability resisting image-cropping. In the end embed the sequence into the low frequency band of the carrier image DCT domain to complete the embedding process. When checking the watermarking, cropped different area of the earner image and calculated the correlation value between the extracted watermarking image and the original image. The experimental result demonstrates that the algorithm can not only resist large area cropping, but also manifest a good robustness when facing other attacking methods.%为提高扩频水印的抗图像剪切能力,提出一种基于面包师的扩频水印算法.该算法首先利用面包师变换对水印图像进行置乱;再通过一组伪随机序列对置乱后的图像进行扩频,可得到具有抗剪切攻击能力的水印序列;最后将水印序列嵌入到载体图像DCT域中低频段部分,完成水印的嵌入.水印检测时,对载体图像分别进行不同面积的剪切,计算出提取的水印图像与原始水印图像的相关值.实验结果证明,该算法不仅能够抵抗大面积的图像剪切,同时对其他攻击方法也能够表现出良好的鲁棒性.

  19. Quantitative security evaluation of optical encryption using hybrid phase- and amplitude-modulated keys.

    Science.gov (United States)

    Sarkadi, Tamás; Koppa, Pál

    2012-02-20

    In the increasing number of system approaches published in the field of optical encryption, the security level of the system is evaluated by qualitative and empirical methods. To quantify the security of the optical system, we propose to use the equivalent of the key length routinely used in algorithmic encryption. We provide a calculation method of the number of independent keys and deduce the binary key length for optical data encryption. We then investigate and optimize the key length of the combined phase- and amplitude-modulated key encryption in the holographic storage environment, which is one of the promising solutions for the security enhancement of single- and double-random phase-encoding encryption and storage systems. We show that a substantial growth of the key length can be achieved by optimized phase and amplitude modulation compared to phase-only encryption. We also provide experimental confirmation of the model results.

  20. Ag nanocluster/DNA hybrids: functional modules for the detection of nitroaromatic and RDX explosives.

    Science.gov (United States)

    Enkin, Natalie; Sharon, Etery; Golub, Eyal; Willner, Itamar

    2014-08-13

    Luminescent Ag nanoclusters (NCs) stabilized by nucleic acids are implemented as optical labels for the detection of the explosives picric acid, trinitrotoluene (TNT), and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). The sensing modules consist of two parts, a nucleic acid with the nucleic acid-stabilized Ag NCs and a nucleic acid functionalized with electron-donating units, including L-DOPA, L-tyrosine and 6-hydroxy-L-DOPA, self-assembled on a nucleic acid scaffold. The formation of donor-acceptor complexes between the nitro-substituted explosives, exhibiting electron-acceptor properties, and the electron-donating sites, associated with the sensing modules, concentrates the explosives in close proximity to the Ag NCs. This leads to the electron-transfer quenching of the luminescence of the Ag NCs by the explosive molecule. The quenching of the luminescence of the Ag NCs provides a readout signal for the sensing process. The sensitivities of the analytical platforms are controlled by the electron-donating properties of the donor substituents, and 6-hydroxy-L-DOPA was found to be the most sensitive donor. Picric acid, TNT, and RDX are analyzed with detection limits corresponding to 5.2 × 10(-12) M, 1.0 × 10(-12) M, and 3.0 × 10(-12) M, respectively, using the 6-hydroxy-L-DOPA-modified Ag NCs sensing module.

  1. 80-Channel Multiplexer-Demultiplexer Module for DWDM Communications using Hybrid AWG -- Interleaver Technology

    Science.gov (United States)

    Rablau, Corneliu; Bredthauer, Lance

    2007-10-01

    Aside from the more traditional data, voice and e-mail communications, new bandwidth intensive applications in the larger consumer markets, such as music, digital pictures and movies, have led to an explosive increase in the demand for transmission capacity for optical communications networks. This has resulted in a widespread deployment of Dense Wavelength Division Multiplexing (DWDM) as a means of increasing the communications capacity by multiplexing and transmitting signals of different wavelengths (establishing multiple communication channels) through a single strand of fiber. We report on the design, assembly and characterization of a 50-GHz, 80-channel Mux-Demux module for DWDM systems. The module has been assembled from two commercially available 100 GHz, 40-channel Array Waveguide Grating (AWG) modules and a 50-GHz to 100-GHz interleaver. Relevant performance parameters such as insertion loss, channel uniformity, next-channel isolation (crosstalk) and integrated cross-talk are presented and discussed in contrast with the performance of other competing technologies such as Thin-Film-Filter-based Mux-Demux devices.

  2. Identification of genetic loci in Lactobacillus plantarum that modulate the immune response of dendritic cells using comparative genome hybridization.

    Directory of Open Access Journals (Sweden)

    Marjolein Meijerink

    Full Text Available BACKGROUND: Probiotics can be used to stimulate or regulate epithelial and immune cells of the intestinal mucosa and generate beneficial mucosal immunomodulatory effects. Beneficial effects of specific strains of probiotics have been established in the treatment and prevention of various intestinal disorders, including allergic diseases and diarrhea. However, the precise molecular mechanisms and the strain-dependent factors involved are poorly understood. METHODOLOGY/PRINCIPAL FINDINGS: In this study, we aimed to identify gene loci in the model probiotic organism Lactobacillus plantarum WCFS1 that modulate the immune response of host dendritic cells. The amounts of IL-10 and IL-12 secreted by dendritic cells (DCs after stimulation with 42 individual L. plantarum strains were measured and correlated with the strain-specific genomic composition using comparative genome hybridisation and the Random Forest algorithm. This in silico "gene-trait matching" approach led to the identification of eight candidate genes in the L. plantarum genome that might modulate the DC cytokine response to L. plantarum. Six of these genes were involved in bacteriocin production or secretion, one encoded a bile salt hydrolase and one encoded a transcription regulator of which the exact function is unknown. Subsequently, gene deletions mutants were constructed in L. plantarum WCFS1 and compared to the wild-type strain in DC stimulation assays. All three bacteriocin mutants as well as the transcription regulator (lp_2991 had the predicted effect on cytokine production confirming their immunomodulatory effect on the DC response to L. plantarum. Transcriptome analysis and qPCR data showed that transcript level of gtcA3, which is predicted to be involved in glycosylation of cell wall teichoic acids, was substantially increased in the lp_2991 deletion mutant (44 and 29 fold respectively. CONCLUSION: Comparative genome hybridization led to the identification of gene loci in L

  3. Designing artificial photosynthetic devices using hybrid organic-inorganic modules based on polyoxometalates.

    Science.gov (United States)

    Symes, Mark D; Cogdell, Richard J; Cronin, Leroy

    2013-08-13

    Artificial photosynthesis aims at capturing solar energy and using it to produce storable fuels. However, while there is reason to be optimistic that such approaches can deliver higher energy conversion efficiencies than natural photosynthetic systems, many serious challenges remain to be addressed. Perhaps chief among these is the issue of device stability. Almost all approaches to artificial photosynthesis employ easily oxidized organic molecules as light harvesters or in catalytic centres, frequently in solution with highly oxidizing species. The 'elephant in the room' in this regard is that oxidation of these organic moieties is likely to occur at least as rapidly as oxidation of water, meaning that current device performance is severely curtailed. Herein, we discuss one possible solution to this problem: using self-assembling organic-polyoxometalate hybrid structures to produce compartments inside which the individual component reactions of photosynthesis can occur without such a high incidence of deleterious side reactions.

  4. 基于GMM模型的自适应扩频隐写安全性分析%Security Analysis of Adaptive Spread Spectrum Image Steganography Based on Gaussian Mixture Model

    Institute of Scientific and Technical Information of China (English)

    奚玲; 平西建; 张昊

    2012-01-01

    Aiming at the security problem of adaptive steganography, the analysis method based on Gaussian mixture model(GMM) of real image is proposed. Compared the stego random characteristic function of probability density function between the adaptive Spread Spectrum Image Steganography(SSIS) and the general non adaptive one under the condition that the total embedding intensity is equal, it demonstrates that the security of adaptive SSIS is higher than that of non-adaptive schemes. Analysis result shows that the method provides theoretical evidence for using adaptive scheme to improve statistical imperceptibility of steganography.%对自适应隐写的安全性问题进行分析,提出一种基于自然图像的高斯混合模型分析方法.在总嵌入强度相同的条件下,比较自适应和非自适应扩频隐写载密随机变量概率密度函数的特征函数,验证自适应扩频隐写的统计安全性高于等嵌入强度下非自适应扩频隐写.分析结果表明,该方法能为提升信息隐藏系统的抗统计分析性能提供理论依据.

  5. 40 GHz electro-optic modulation in hybrid silicon-organic slotted photonic crystal waveguides.

    Science.gov (United States)

    Wülbern, Jan Hendrik; Prorok, Stefan; Hampe, Jan; Petrov, Alexander; Eich, Manfred; Luo, Jingdong; Jen, Alex K-Y; Jenett, Martin; Jacob, Arne

    2010-08-15

    In this Letter we demonstrate broadband electro-optic modulation with frequencies of up to 40 GHz in slotted photonic crystal waveguides based on silicon-on-insulator substrates covered and infiltrated with a nonlinear optical polymer. Two-dimensional photonic crystal waveguides in silicon enable integrated optical devices with an extremely small geometric footprint on the scale of micrometers. The slotted waveguide design optimizes the overlap of the optical and electric fields in the second-order nonlinear optical medium and, hence, the interaction of the optical and electric waves.

  6. Development of high data readout rate pixel module and detector hybridization at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Sergio Zimmermann et al.

    2001-03-20

    This paper describes the baseline design and a variation of the pixel module to handle the data rate required for the BTeV experiment at Fermilab. The present prototype has shown good electrical performance characteristics. Indium bump bonding is proven to be capable of successful fabrication at 50 micron pitch on real detectors. For solder bumps at 50 micron pitch, much better results have been obtained with the fluxless PADS processed detectors. The results are adequate for our needs and our tests have validated it as a viable technology.

  7. Characterization of new hybrid pixel module concepts for the ATLAS Insertable B-Layer upgrade

    CERN Document Server

    Backhaus, Malte

    2012-01-01

    The ATLAS Insertable B-Layer (IBL) collaboration plans to insert a fourth pixel layer inside the present Pixel Detector to recover from eventual failures in the current pixel system, especially the b-layer. Additionally the IBL will ensure excellent tracking, vertexing and b-tagging performance during the LHC phase I and add robustness in tracking with high luminosity pile-up. The expected peak luminosity for IBL is 2 to 3centerdot1034 cm-2s-1 and IBL is designed for an integrated luminosity of 700 fb-1. This corresponds to an expected fluence of 5centerdot1015 1 MeV neqcm-2 and a total ionizing dose of 250 MRad. In order to cope with these requirements, two new module concepts are under investigation, both based on a new front end IC, called FE-I4. This IC was designed as readout chip for future ATLAS Pixel Detectors and its first application will be the IBL. The planar pixel sensor (PPS) based module concept benefits from its well understood design, which is kept as similar as possible to the design of the ...

  8. Characterization of new hybrid pixel module concepts for the ATLAS Insertable B-Layer upgrade

    CERN Document Server

    Backhaus, M

    2012-01-01

    The ATLAS Insertable B-Layer (IBL) collaboration plans to insert a fourth pixel layer inside the present Pixel Detector to recover from eventual failures in the current pixel system, especially the b-layer. Additionally the IBL will ensure excellent tracking, vertexing and b-tagging performance during the LHC phase I and add robustness in tracking with high luminosity pile-up. The expected peak luminosity for IBL is 2 to 3•10^34 cm^−2 s^ −1 and IBL is designed for an integrated luminosity of 700 fb^−1 . This corresponds to an expected fluence of 5 • 10^15 1 MeV n_eqcm^−2 and a total ionizing dose of 250 MRad. In order to cope with these requirements, two new module concepts are under investigation, both based on a new front end IC, called FE-I4. This IC was designed as readout chip for future ATLAS Pixel Detectors and its first application will be the IBL. The planar pixel sensor (PPS) based module concept benefits from its well understood design, which is kept as similar as possible to the design...

  9. Using spread spectrum for AMR magnetic sensor

    Science.gov (United States)

    Vala, David

    2016-09-01

    This contribution describe invention of Magnetometer with protection against detection by electronic counter- measure (ECM) registered by Czech patent office as patent no. 305322.1 Magnetic sensors are often part of dual use or security instruments and equipment. For this purpose is very interesting to build sensor with is hidden against electronic countermeasure. In this case is very important level and behavior of electromagnetic noise produced by sensor. And also electromagnetic compatibility of electronic devices is the area which significant grows nowadays too. As the consequence of this growth there is a continuous process of making more strict standards focused on electromagnetic radiation of electronic devices. Sensors technology begins to be a part of these issues due sensors bandwidth increasing and approaching to frequency of radio communication band. Nowadays microcontrollers and similar digital circuits are integrated into sensors devices and it brings new sources of electromagnetic radiation in modern smart sensors.

  10. Multipath noise reduction spread spectrum signals

    Science.gov (United States)

    Meehan, Thomas K. (Inventor)

    1994-01-01

    The concepts of early-prompt delay tracking, multipath correction of early-prompt delay tracking from correlation shape, and carrier phase multipath correction are addressed. In early-prompt delay tracking, since multipath is always delayed with respect to the direct signals, the system derives phase and pseudorange observables from earlier correlation lags. In multipath correction of early-prompt delay tracking from correlation shape, the system looks for relative variations of amplitude across the code correlation function that do not match the predicted multipath-free code cross-correlation shape. The system then uses deviations from the multipath-free shape to infer the magnitude of multipath, and to generate corrections pseudorange observables. In carrier phase multipath correction, the system looks for variations of phase among plural early and prompt lags. The system uses the measured phase variations, along with the general principle that the multipath errors are larger for later lags, to infer the presence of multipath, and to generate corrections for carrier-phase observables.

  11. Rapid full Mueller matrix imaging polarimetry based on the hybrid phase modulation technique

    Science.gov (United States)

    Han, Chien-Yuan; Du, Cheng-You; Jhou, Jhe-Yi

    2017-01-01

    In this work, we present a novel method of Mueller matrix imaging polarimetry, which comprises dual liquid crystal variable retarders at the polarization generation portion and a photoelastic modulator at the polarization analysis portion. The light source can be operated either in the continuous mode, which provides an in-situ calibration process for the liquid crystal variable retarders, or in the pulse mode to deduce the full two-dimensional Mueller matrix with 16 images from the camera. We measured the Mueller matrix images of air as a standard test, as well as a quarter wave plate to determine its azimuthal angle and phase retardation by the polar decomposition technique. Finally, the decomposed Mueller matrix images of a biopolymer specimen with the conformational change produced by heat treatment are presented.

  12. Rocking-chair configuration in ultrathin lithium vanadate-graphene hybrid nanosheets for electrical modulation.

    Science.gov (United States)

    Zhu, Haiou; Qin, Xinming; Sun, Xu; Yan, Wensheng; Yang, Jinlong; Xie, Yi

    2013-01-01

    The ability to control electronic property of a material by externally applied voltage is greatly anticipated in modern electronics, and graphene provide potential application foreground for this issue on account of its exotic ambipolar transport property. In this study, we proposed that inorganic-graphene intercalated nanosheet is an effective solution to optimize the transport property of graphene. As an example, lithium vanadate-graphene (LiVO-graphene) alternately intercalated nanosheets were designed and successfully synthesized. Theoretical calculation implied that its rocking chair configuration may provide a new pathway to switch the carrier in graphene layer between p-type and n-type while the position of embedded Li ions is controlled by an external field. Thus, a demo transistor was fabricated with layer-by-layer overlapping of LiVO-graphene nanosheets which proved that this inorganic-graphene structure could be used for electrical modulation in electronic devices.

  13. A substitute for BOC modulation based on SS-CPM

    Science.gov (United States)

    Su, Chengeng; Guo, Shuren; Zhou, Hongwei

    2013-03-01

    CPM (continuous phase modulation) has been widely used in the field of satellite communication, which has high spectrum efficiency and constant envelope. This paper explores the applicability of CPM to satellite navigation. A SS-CPM (Spread-Spectrum CPM) modulation is investigated. The SS-CPM with tuned parameters can resemble the spectrum of Binary Offset Carrier (BOC) modulation and yields comparable performance in terms of tracking accuracy, multipath mitigation, anti-jamming, and compatibility. The BOC-like SS-CPM signal maintains the constant envelope at transmission and less out-band emission in radio determination satellite service (RDSS) band, which provides a reference modulation for COMPASS satellite navigation signal.

  14. Speeding-up the hybrid video watermarking techniques in the DWT domain

    Science.gov (United States)

    Chammem, A.; Mitrea, M.; Preteux, F.

    2010-01-01

    The watermarking state of the art exhibits the hybrid methods combining spread spectrum and side information principles. The present study is focussed on speeding up such an algorithm (jointly patented by SFR - Vodafone Group and Institut Telecom). The dead lock on the reference method is first identified: the embedding module accounts for 90% of the whole watermarking chain and that more than 99% of this time is spent on applying an attack procedure (required in order to grant a good robustness to this method). The main issue of the present study is to deploy Monte Carlo generators accurately representing the watermarking attacks. In this respect, two difficulties should be overcome. First, accurate statistical models for the watermarking attacks should be obtained. Secondly, efficient Monte Carlo simulators should be deployed for these models. The last part of the study was devoted to the experimental validations. The mark is inserted in the (9,7) DWT representation of video sequence. Several types of attacks have been considered (linear and non-linear filters, geometrical transformations, ...). The quantitative results proved that the data payload, transparency and robustness properties have been inherited from the reference method. However, the watermarking speed was increased by a factor of 80.

  15. Modeling and Control of a Flux-Modulated Compound-Structure Permanent-Magnet Synchronous Machine for Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Zhiyi Song

    2012-01-01

    Full Text Available The compound-structure permanent-magnet synchronous machine (CS-PMSM, comprising a double rotor machine (DRM and a permanent-magnet (PM motor, is a promising electronic-continuously variable transmission (e-CVT concept for hybrid electric vehicles (HEVs. By CS-PMSM, independent speed and torque control of the vehicle engine is realized without a planetary gear unit. However, the slip rings and brushes of the conventional CS-PMSM are considered a major drawback for vehicle application. In this paper, a brushless flux-modulated CS-PMSM is investigated. The operating principle and basic working modes of the CS-PMSM are discussed. Mathematical models of the CS-PMSM system are given, and joint control of the two integrated machines is proposed. As one rotor of the DRM is mechanically connected with the rotor of the PM motor, special rotor position detection and torque allocation methods are required. Simulation is carried out by Matlab/Simulink, and the feasibility of the control system is proven. Considering the complexity of the controller, a single digital signal processor (DSP is used to perform the interconnected control of dual machines instead of two separate ones, and a typical hardware implementation is proposed.

  16. Field-effect-based multifunctional hybrid sensor module for the determination of both (bio-)chemical and physical parameters

    Science.gov (United States)

    Schoening, Michael J.; Poghossian, Arshak; Schultze, J. Walter; Lueth, Hans

    2002-02-01

    Sensor systems for multi-parameter detection in fluidics usually combine different sensors, which are designed to detect either a physical or (bio-)chemical parameter. Therefore, such systems include a more complicated fabrication technology and measuring set-up. In this work, an ISFET (ion-sensitive field-effect transistor), which is well known as a (bio-)chemical sensor, is utilized as transducer for the detection of both (bio-)chemical and physical parameters. A multifunctional hybrid module for the determination of two (bio-)chemical parameters (pH, penicillin concentration) and three physical parameters (temperature, flow velocity and flow direction) using only two sensor structures, an ion generator and a reference electrode, is realized and its performance has been investigated. Here, a multifunctionality of the sensor system is achieved by means of different sensor arrangements and/or different operation modes. A Ta2O5-gate ISFET was used as transducer for all sensors. A novel time-of-flight type ISFET-based flow-velocity (flow rate) and flow-direction sensor using in-situ electrochemical generation of chemical tracers is presented. Due to the fast response of the ISFET (usually in the millisecond range), an ISFET-based flow sensor is suitable for the measurement of the flow velocity in a wide range. With regard to practical applications, pH measurements with this ISFET were performed in rain droplets.

  17. Path Weight Complementary Convolutional Code for Type-II Bit-Interleaved Coded Modulation Hybrid ARQ System

    Institute of Scientific and Technical Information of China (English)

    CHENG Yuxin; ZHANG Lei; YI Na; XIANG Haige

    2007-01-01

    Bit-interleaved coded modulation (BICM) is suitable to bandwidth-efficient communication systems. Hybrid automatic repeat request (HARQ) can provide more reliability to high-speed wireless data transmission. A new path weight complementary convolutional (PWCC) code used in the type-ll BICM-HARQ system is proposed. The PWCC code is composed of the original code and the complimentary code. The path in trellis with large hamming weight of the complimentary code is designed to compensate for the path in trellis with small hamming weight of the original code. Hence, both of the original code and the complimentary code can achieve the performance of the good code criterion of corresponding code rate. The throughput efficiency of the BICM-HARQ system wit PWCC code is higher than repeat code system, a little higher than puncture code system in low signal-to-noise ratio (SNR) values and much higher than puncture code system, the same as repeat code system in high SNR values. These results are confirmed by the simulation.

  18. Electric field-induced transport modulation in VO2 FETs with high-k oxide/organic parylene-C hybrid gate dielectric

    Science.gov (United States)

    Wei, Tingting; Kanki, Teruo; Fujiwara, Kohei; Chikanari, Masashi; Tanaka, Hidekazu

    2016-02-01

    We report on the observation of reversible and immediate resistance switching by high-k oxide Ta2O5/organic parylene-C hybrid dielectric-gated VO2 thin films. Resistance change ratios at various temperatures in the insulating regime were demonstrated to occur in the vicinity of phase transition temperature. We also found an asymmetric hole-electron carrier modulation related to the suppression of phase transition temperature. The results in this research provide a possibility for clarifying the origin of metal-insulator transition in VO2 through the electrostatic field-induced transport modulation.

  19. Electric field-induced transport modulation in VO{sub 2} FETs with high-k oxide/organic parylene-C hybrid gate dielectric

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Tingting [Institute of Scientific and Industrial Research, Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Faculty of Science, Kunming University of Science and Technology, Kunming 650093 (China); Kanki, Teruo, E-mail: kanki@sanken.osaka-u.ac.jp, E-mail: h-tanaka@sanken.osaka-u.ac.jp; Chikanari, Masashi; Tanaka, Hidekazu, E-mail: kanki@sanken.osaka-u.ac.jp, E-mail: h-tanaka@sanken.osaka-u.ac.jp [Institute of Scientific and Industrial Research, Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Fujiwara, Kohei [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)

    2016-02-01

    We report on the observation of reversible and immediate resistance switching by high-k oxide Ta{sub 2}O{sub 5}/organic parylene-C hybrid dielectric-gated VO{sub 2} thin films. Resistance change ratios at various temperatures in the insulating regime were demonstrated to occur in the vicinity of phase transition temperature. We also found an asymmetric hole-electron carrier modulation related to the suppression of phase transition temperature. The results in this research provide a possibility for clarifying the origin of metal-insulator transition in VO{sub 2} through the electrostatic field-induced transport modulation.

  20. Transient and modulated charge separation at CuInSe2/C60 and CuInSe2/ZnPc hybrid interfaces

    Science.gov (United States)

    von Morzé, Natascha; Dittrich, Thomas; Calvet, Wolfram; Lauermann, Iver; Rusu, Marin

    2017-02-01

    Spectral dependent charge transfer and exciton dissociation have been investigated at hybrid interfaces between inorganic polycrystalline CuInSe2 (untreated and Na-conditioned) thin films and organic C60 as well as zinc phthalocyanine (ZnPc) layers by transient and modulated surface photovoltage measurements. The stoichiometry and electronic properties of the bare CuInSe2 surface were characterized by photoelectron spectroscopy which revealed a Cu-poor phase with n-type features. After the deposition of the C60 layer, a strong band bending at the CuInSe2 surface was observed. Evidence for dissociation of excitons followed by charge separation was found at the CuInSe2/ZnPc interface. The Cu-poor layer at the CuInSe2 surface was found to be crucial for transient and modulated charge separation at CuInSe2/organic hybrid interfaces.

  1. Wavelet packet spread spectrum system based on neural network equalizers%基于神经网络均衡器的小波包多载波扩频系统

    Institute of Scientific and Technical Information of China (English)

    周雷; 李建东; 张光辉; 庞继勇

    2008-01-01

    在多径衰落信道下,本文提出了一种基于神经网络均衡器的小波包多载波扩频系统(Neural Network Equalizers Wavelet Packet Spread Spectrum,NNE-WPSS).本文利朋基于最小均方算法(Least Mean Square algorithm,LMS)的复径向基函数神经网络均衡器(Complex Radial Basis Function Network Equalizers,CRBF)来抑制由多径衰落信道引起的码间干扰(Inter-Symbol Interference,ISI)并且利用最大似然算法对解调后的码元进行检测.在多径衰落信道和白高斯噪声情况下,本文分析了基于神经网络均衡器的新型小波包多载波扩频系统的传输性能.仿真结果表明,本文所提出的基于神经网络均衡器的新型小波包多载波扩频系统的性能要优于传统的基于正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)多载波扩频系统;本文提出的复径向基函数神经网络均衡器(CRBF)的性能也优于迫零均衡器(Zero-Forcing Equalizer,ZFE).

  2. A Very High Bit Rate Broadband Acoustic Modem for Short-to-Medium Range Data Transmission in Ports And Shallow Water Using Spread Spectrum Modulation and Decision Feedback Equalizing

    Science.gov (United States)

    2008-09-30

    using the high-resolution, low-noise acquisition system developed by EdgeTech in collaboration with FAU . The acquisition system produces complex base...direct transducer coupling; (2) System calibration in the acoustic tank at FAU SeaTech; (3) Field tests in the FAU SeaTech marina. During the later...the FAU SeaTech marina on July 25th, 2008 (Figure 3). During the SeaTech demonstration, the source was operating at 32 W of output acoustic power

  3. The Ability of Spread Spectrum Communication Technique to Resist Multipath Decline and Simulation in a Rectangle Tunnel Model%扩频通信抗多径衰落性能及在矩形隧道模型中仿真

    Institute of Scientific and Technical Information of China (English)

    曹玉兵; 张会清

    2014-01-01

    The multipath decline is severe in limited space (such as in tunnel, in laneway and in building), so the quality of mobile communication in it drops sharply. The ability of spread spectrum communication technique to resist multipath decline is studied, the expression of SNR and BER of the system using spread spectrum communication technique is educed, a bit error curve of simulation with a rectangle tunnel model is got and the simulating result demonstrates that the performance of the system to resist multipath decline is improved awfully.%文章通过扩频通信技术有关性能分析和仿真,得出了扩频通信对多径干扰具有很强的抑制能力,可以有效地解决限定空间内移动通信质量急剧下降问题。

  4. An atomic spin precession detection method based on electro-optic modulation in an all-optical K-Rb hybrid atomic magnetometer

    Science.gov (United States)

    Hu, Yanhui; Liu, Xuejing; Li, Yang; Yao, Han; Dai, Lingling; Yang, Biyao; Ding, Ming

    2017-07-01

    We present an ultrahigh-sensitivity electro-optic modulator (EOM) detection method for detecting the atomic Larmor precession in an all-optical K-Rb hybrid atomic magnetometer operating in the spin-exchange relaxation-free regime. A magnetic field sensitivity of ~10 f T Hz-1/2 has been achieved by optimizing the probe laser parameters and the EOM modulation conditions, which is comparable to that with the Faraday modulation method and has a better performance than the balanced polarimetry method in the low frequency range. The EOM detection method in the atomic magnetometer presents several advantages, such as simple structure, no extra magnetic noise, moderate thermal effect, high measurement sensitivity and reliable stability. It is demonstrated to be feasible for the improved compactness and simplicity of atomic magnetic field measurement devices in the future.

  5. Modulation technology of hybrid multi-level inverter%混合多电平逆变器调制技术研究

    Institute of Scientific and Technical Information of China (English)

    杨兴武; 高淳; 姜建国

    2011-01-01

    Based on traditional hybrid modulation strategy,the selection of DC supply voltage is analyzed for all modulation ratios of hybrid multi-level inverter when no energy flows between cells. Based on the analysis of output voltage fundamental for each unit,a modulation method is proposed;the two lowest-voltage cells are modulated by carrier phase-shift strategy to make their working frequency high,which improves the DC supply voltage ratio of hybrid multi-level inverter when no energy flows between cells and no over-modulation occurs. The modulation signals generated by DSP are sent to FPGA in parallel and the hybrid control algorithm is implemented by FPGA. Experimental results show that,the maximum DC voltage ratios are raised from 1:1:2: 4:8: … To 1:1:3:5:10:… When no energy flows between cells.%基于传统混合调制策略,在混合多电平逆变器所有调制比范围内,对各单元之间不发生能量流动时的直流电源电压取值问题进行分析,并通过对传统混合调制策略下混合多电平逆变器各单元输出电压的基波分析提出一种新方法:即将2个最低压单元用载波相移调制,使其均工作在高频状态.该方法的突出优点是在各单元不发生能量流动且不出现过调制的情况下,可以提高混合多电平逆变器的直流电源电压比值.最后给出了实验验证:由DSP产生调制信号,通过并行通信传送至FPGA,混合控制算法由FPGA实现.实验结果验证了该方法可在各单元之间不发生能量流动时,混合多电平逆变器的最高直流电压比由1∶1∶2∶4∶8∶…提高到1∶1∶3∶5∶10∶….

  6. Anti-jamming scheme of pilot modification MLD based on superimposed spread spectrum for UAV-MIMO%基于叠加扩频的无人机 MIMO 导频修正 MLD 抗干扰

    Institute of Scientific and Technical Information of China (English)

    陈自力; 高喜俊

    2015-01-01

    The remote control link of unmanned aerial vehicle (UAV)is often cluttered by interference, which results in performance degradation or losing lock.The technologies of multiple input multiple output (MIMO)space time block codes and direct spread are combined to suppress the common interference in the re-mote control link.The superimposed spread spectrum is presented to eliminate multiple access interference in the fusion technology,combat against narrow-band jamming and avoid deception jamming.The maximum likeli-hood decoding (MLD)based on the subspace projection of noise is adopted to suppress the noise interference of natural and strong wideband.The disturb deviation of MLD caused by channel estimation deviation is analyzed. Then the pilot modification is set up to reduce the effect of channel estimate error on MLD performance.The theoretical analysis and system simulation show that the scheme has better communication privacy and great ro-bustness which can suppress multi-population interferences.It can provide a scheme for achieving the intelligent anti-jamming of UAV in the future.%针对无人机遥控链路常受干扰的影响导致性能下降甚至失锁,研究将多输入多输出(multiple input multiple output,MIMO)空时分组编码与直扩技术相结合实现对链路常见干扰抑制。提出叠加扩频的方法消除融合技术中存在的多址干扰、对抗窄带干扰并预防欺骗干扰;采用基于噪声子空间投影的简化最大似然译码(maximum likelihood decoding,MLD)抑制自然以及强宽带噪声干扰,通过分析由信道估计误差引起的 MLD 扰动误差,并利用导频修正来降低信道估计误差对 MLD 性能影响。理论分析及仿真表明,该方案通信保密性好、鲁棒性强,能够实现对多种干扰的抑制,为未来无人机智能抗干扰的实现提供方案。

  7. 多径衰落信道下混沌直扩通信的可破解性%Breakability of chaotic direct sequence spreading spectrum secure system under multi-path fading channel

    Institute of Scientific and Technical Information of China (English)

    白鹭; 郭静波

    2011-01-01

    本文在文献[1]的基础上,研究多径衰落信道条件下采用无先导卡尔曼滤波混沌拟合对混沌直扩通信的可破解性.由针对混沌直扩信号的无先导卡尔曼滤波混沌拟合的状态空间方程出发,分析了多径衰落信道对于无先导卡尔曼滤波混沌拟合过程中的跟踪误差的影响,得到了信息码状态估计的值域范围,从而提出了多径衰落信道下混沌直扩信号可被破解的充分条件定理.仿真结果表明,在满足充分条件下,混沌直扩信号无论是通过时不变信道还是时变信道,都可以被成功破解,并且具有良好的误码率性能.%Blind demodulation (breaking) of chaotic direct sequence spread spectrum (CD3S) signals is a challenging and leading issue under muhipath fading channel in the field of chaotic communication. Until now, there are neither equalization methods to remove the impact of the channel, nor the immediate breaking methods. Based on the existing study, the breakability of CD3S signals is analyzed under multipath fading channel by using unscented Kalman filter (UKF) chaotic fitting in this paper. Beginning with the state space equation for the CD3S signals in UKF chaotic fitting, the channel influence on the tracking error is analyzed in the process of UKF chaotic fitting, then the range of the message state estimation is derived, and finally a sufficient condition theorem is proposed for the CD3S signals to be broken. Simulation results show that CD3S signals can be broken successfully under the proposed condition with excellent performance of bit error rate (BER) , no matter whether the channel characteristic is either time-invariant or time-variant.

  8. Evaluation of a hybrid artificial liver module based on a spheroid culture system of embryonic stem cell-derived hepatic cells.

    Science.gov (United States)

    Mizumoto, Hiroshi; Hayashi, Shunsuke; Matsumoto, Kinya; Ikeda, Kaoru; Kusumi, Tomoaki; Inamori, Masakazu; Nakazawa, Kohji; Ijima, Hiroyuki; Funatsu, Kazumori; Kajiwara, Toshihisa

    2012-01-01

    Hybrid artificial liver (HAL) is an extracorporeal circulation system comprised of a bioreactor containing immobilized functional liver cells. It is expected to not only serve as a temporary liver function support system, but also to accelerate liver regeneration in recovery from hepatic failure. One of the most difficult problems in developing a hybrid artificial liver is obtaining an adequate cell source. In this study, we attempt to differentiate embryonic stem (ES) cells by hepatic lineage using a polyurethane foam (PUF)/spheroid culture in which the cultured cells spontaneously form spherical multicellular aggregates (spheroids) in the pores of the PUF. We also demonstrate the feasibility of the PUF-HAL system by comparing ES cells to primary hepatocytes in in vitro and ex vivo experiments. Mouse ES cells formed multicellular spheroids in the pores of PUF. ES cells expressed liver-specific functions (ammonia removal and albumin secretion) after treatment with the differentiation-promoting agent, sodium butyrate (SB). We designed a PUF-HAL module comprised of a cylindrical PUF block with many medium-flow capillaries for hepatic differentiation of ES cells. The PUF-HAL module cells expressed ammonia removal and albumin secretion functions after 2 weeks of SB culture. Because of high proliferative activity of ES cells and high cell density, the maximum expression level of albumin secretion function per unit volume of module was comparable to that seen in primary mouse hepatocyte culture. In the animal experiments with rats, the PUF-HAL differentiating ES cells appeared to partially contribute to recovery from liver failure. This outcome indicates that the PUF module containing differentiating ES cells may be a useful biocomponent of a hybrid artificial liver support system.

  9. Realization of PMD compensation logic control module of the hybrid structure%混合结构PMD补偿逻辑控制模块的实现

    Institute of Scientific and Technical Information of China (English)

    孙伟斌; 白成林; 许恒迎

    2012-01-01

    order to improve the response speed of adaptive PMD compensation control module, we design a PMD compensation logic control module based on the hybrid structure of digital signal processor (DSP) and field programmable gate array (FPGA).And the realization method of each unit within the module is also shown. The performance analysis of PMD compensation logic control module shows that the module has good compensation effect,and one compensation time unit of this module consumes 61 祒s and the total hardware working time within it is 110.7祍, which are only about 1/3 and 1/8 of the module using DSP, respectively.%为提高自适应PMD补偿控制模块的响应速度,设计了一种基于数字信号处理器(DSP)+现场可编程门阵列(FPGA)混合结构的PMD补偿逻辑控制模块,给出了模块内各单元的实现方法.对PMD补偿逻辑控制模块的性能分析表明:本模块补偿效果良好,一个补偿时间单元的总耗时为611μs,在此期间内硬件工作总时间为110.7μs,分别仅为DSP方式的1/3和1/8.

  10. Mass preparation of primary porcine hepatocytes and the design of a hybrid artificial liver module using spheroid culture for a clinical trial.

    Science.gov (United States)

    Fukuda, J; Sakiyama, R; Nakazawa, K; Ijima, H; Yamashita, Y; Shimada, M; Shirabe, K; Tsujita, E; Sugimachi, K; Funatsu, K

    2001-11-01

    To isolate a large number of porcine hepatocytes, we originally developed a mass preparation method that combined the usual collagenase perfusion method of a whole liver with a collagenase redigestion method of tissue fragments after liver perfusion. Using a pig of 10kg, collagenase perfusion only resulted in a yield of 63+/-78 x 10(8) total cells with a viability of 69.2+/-25.3 %, but our combined method had a yield of 167+/-31 x 10(8) total cells with a viability of 87.9+/-4.4% (mean +/- SD). Also, the combined method was applied to two pigs of 10kg body weight at the same time, and isolated 387+/-89 x 10(8) hepatocytes with a viability of 87.1+/-6.9% and a purity of 93.6+/-2.8 % in 11 experiments. We designed a large multi-capillary polyurethane foam (MC-PUF) packed-bed module containing 1 x 10(10) porcine hepatocytes on a clinical trial scale. The porcine hepatocytes in the module formed spherical multicellular aggregates (spheroids) of 200 - 500 microm diameter. Most hepatocytes forming spheroids were viable judged by fluorescein diacetate and ethidium bromide staining. The activities of ammonia removal, albumin secretion and oxygen consumption of the large MC-PUF module were the same as for a small MC-PUF module containing 2 x 10(8) porcine hepatocytes, and were maintained for at least 9 days of culture. These results show that a large MC-PUF module is successfully scaled up 50 times. In conclusion, we succeeded in developing a mass preparation method of porcine hepatocytes and a large hybrid artificial liver module on a clinical trial scale.

  11. Novel indolizino[8,7-b]indole hybrids as anti-small cell lung cancer agents: Regioselective modulation of topoisomerase II inhibitory and DNA crosslinking activities.

    Science.gov (United States)

    Chang, Sue-Ming; Christian, Wilson; Wu, Ming-Hsi; Chen, Tai-Lin; Lin, Yi-Wen; Suen, Ching-Shu; Pidugu, Hima Bindu; Detroja, Dilip; Shah, Anamik; Hwang, Ming-Jing; Su, Tsann-Long; Lee, Te-Chang

    2017-02-15

    A novel series of bis(hydroxymethyl)indolizino[8,7-b]indole hybrids composed of β-carboline (topoisomerase I/II inhibition) and bis(hydroxymethyl)pyrrole (DNA cross-linking) are synthesized for antitumor evaluation. Of tumor cell lines tested, small cell lung cancer (SCLC) cell lines are the most sensitive to the newly synthesized compounds. These hybrids induce cell cycle arrest at the G2/M phase, trigger tumor cell apoptotic death, and display diverse mechanisms of action involving topoisomerase II (Topo II) inhibition and induction of DNA cross-linking. Intriguingly, the substituent at N(11) (H or Me) plays a critical role in modulating Topo II inhibition and DNA cross-linking activities. N(11)-Me derivatives predispose to induce DNA crosslinks, whereas N(11)-H derivatives potently inhibit Topo II. Computational analysis implicates that N(11)-Me restrict the torsion angles of the two adjacent OH on pyrrole resulting in a favorable of DNA cross-linking. Among these hybrids, compound 17a with N(11)-H is more effective than cisplatin and etoposide, but as potent as irinotecan, against the growth of SCLC H526 cells in xenograft model.

  12. Chaotic spread spectrum-based model design and simulation of multi-user emergency communication system%基于混沌扩频的多用户应急通信系统模型设计与仿真分析

    Institute of Scientific and Technical Information of China (English)

    焦方源

    2011-01-01

    In view of the present issue that channel noise seriously affects the communication quality of emergency communications, this paper studied the channel noise source and essential characteristics of emergency communication system and proposed a channel model of emergency communication, discussed the principles of interference noise suppression in chaotic spread-spectrum emergency communication system, designed a multi-user simulation model of chaotic spread spectrum emergency communications system, and advanced its Bit Error Ratio (BER) simulation and analysis in typical channel interference noise.The simulation results show that the chaotic spread spectrum communication system can effectively suppress strong noise interference and improve system BER performance in emergency communications significantly.%针对应急通信中信道噪声干扰严重影响通信质量的实际问题,研究了应急通信系统信道噪声干扰的来源与本质特征,提出了应急通信信道模型;论述了混沌扩频应急通信系统干扰噪声抑制原理.设计了多用户混沌扩频应急通信系统仿真模型,并结合典型信道干扰噪声环境对其比特误码率(BER)进行了仿真与分析.仿真实验结果表明,基于混沌扩频的应急通信系统能够有效抑制强噪声干扰,显著改善应急通信系统误码性能.

  13. Hybrid plan verification for intensity-modulated radiation therapy (IMRT) using the 2D ionization chamber array I'mRT MatriXX--a feasibility study.

    Science.gov (United States)

    Dobler, Barbara; Streck, Natalia; Klein, Elisabeth; Loeschel, Rainer; Haertl, Petra; Koelbl, Oliver

    2010-01-21

    The 2D ionization chamber array I'mRT MatriXX (IBA, Schwarzenbruck, Germany) has been developed for absolute 2D dosimetry and verification of intensity-modulated radiation therapy (IMRT) for perpendicular beam incidence. The aim of this study is to evaluate the applicability of I'mRT MatriXX for oblique beam incidence and hybrid plan verification of IMRT with original gantry angles. For the assessment of angular dependence, open fields with gantry angles in steps of 10 degrees were calculated on a CT scan of I'mRT MatriXX. For hybrid plan verification, 17 clinical IMRT plans and one rotational plan were used. Calculations were performed with pencil beam (PB), collapsed cone (CC) and Monte Carlo (MC) methods, which had been previously validated. Measurements were conducted on an Elekta SynergyS linear accelerator. To assess the potential and limitations of the system, gamma evaluation was performed with different dose tolerances and distances to agreement. Hybrid plan verification passed the gamma test with 4% dose tolerance and 3 mm distance to agreement in all cases, in 82-88% of the cases for tolerances of 3%/3 mm, and in 59-76% of the cases if 3%/2 mm were used. Separate evaluation of the low dose and high dose regions showed that I'mRT MatriXX can be used for hybrid plan verification of IMRT plans within 3% dose tolerance and 3 mm distance to agreement with a relaxed dose tolerance of 4% in the low dose region outside the multileaf collimator (MLC).

  14. Generalized minimum shift-keying modulation techniques

    Science.gov (United States)

    Sadr, Ramin; Omura, Jim K.

    1988-01-01

    The simultaneous data demodulation and phase tracking of an MSK signal using the Viterbi algorithm is described and two variations of MSK modulation are studied. The MSK with overlay is a dual rate modulation technique where low-and high-rate data are superimposed on an MSK signal. Here the demodulator uses the Viterbi algorithm to estimate both the low-and high-rate data simultaneously. The MSK with pseudorandom sequence spreading combats intentional or unintentional jamming. A simplified receiver for these spread spectrum MSK signals is found, which takes into consideration the effect of random phase perturbations. The performance of these demodulators is evaluated using transfer function bounds for the bit error probability. It is shown that with a reasonable short overlay period, at a relatively high signal-to-noise ratio (13 dB), there is a small (0.7 dB) loss of performance. For demodulation of the spread spectrum MSK signal, a simplified receiver is derived, and its performance in the presence of continuous jamming is evaluated.

  15. A Novel Compact and Reliable Hybrid Silicon/Silicon Carbide Device Module for Efficient Power Conversion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — United Silicon Carbide, Inc. proposes to develop a novel compact, efficient and high-temperature power module, based on unique co-packaging approach of normally-off...

  16. Isolation of cDNAs of scrapie-modulated RNAs by subtractive hybridization of a cDNA library.

    OpenAIRE

    1988-01-01

    We have developed a subtractive cloning procedure based on the hybridization of single-stranded cDNA libraries constructed in pi H3M, a vector containing the phage M13 origin of replication. We have used this strategy to isolate three transcripts whose abundance is increased in scrapie-infected brain. DNA sequence analysis showed that they represent glial fibrillary acidic protein, metallothionein II, and the B chain of alpha-crystallin; the latter two may represent a response to stress.

  17. Selection of hybrids and edible citrus species with a high content in the diosmin functional compound. Modulating effect of plant growth regulators on contents.

    Science.gov (United States)

    Marín, F R; Del Río, J A

    2001-07-01

    The purpose of this study is to identify species, hybrids, and cultivars of edible Citrus species with high contents of diosmin as a functional compound and also to identify the developmental progress of the fruit in which it reaches maximum levels; these findings would be useful for extraction purposes and for the modulating effect of plant growth regulators on diosmin content to increase the level of this flavone. The results obtained reveal that the highest contents of diosmin are present in immature fruits of certain varieties of citron (Buda's finger) and lemon (Meyer), whereas the contents in the edible parts of the fruits are irrelevant from a pharmacological point of view. Similarly, it is shown that it is possible to increase the content of this flavone using hormonal treatments (6-benzylaminopurine and 2,4-dichlorophenoxyacetic acid) during the early stages of fruit growth.

  18. Co-integrated 1.3µm hybrid III-V/silicon tunable laser and silicon Mach-Zehnder modulator operating at 25Gb/s.

    Science.gov (United States)

    Ferrotti, Thomas; Blampey, Benjamin; Jany, Christophe; Duprez, Hélène; Chantre, Alain; Boeuf, Frédéric; Seassal, Christian; Ben Bakir, Badhise

    2016-12-26

    In this paper, the 200mm silicon-on-insulator (SOI) platform is used to demonstrate the monolithic co-integration of hybrid III-V/silicon distributed Bragg reflector (DBR) tunable lasers and silicon Mach-Zehnder modulators (MZMs), to achieve fully integrated hybrid transmitters for silicon photonics. The design of each active component, as well as the fabrication process steps of the whole architecture are described in detail. A data transmission rate up to 25Gb/s has been reached for transmitters using MZMs with active lengths of 2mm and 4mm. Extinction ratios of respectively 2.9dB and 4.7dB are obtained by applying drive voltages of 2.5V peak-to-peak on the MZMs. 25Gb/s data transmission is demonstrated at 1303.5nm and 1315.8nm, with the possibility to tune the operating wavelength by up to 8.5nm in each case, by using metallic heaters above the laser Bragg reflectors.

  19. Monolithic integration of hybrid III-V/Si lasers and Si-based modulators for data transmission up to 25Gbps

    Science.gov (United States)

    Ferrotti, Thomas; Blampey, Benjamin; Jany, Christophe; Duprez, Hélène; Chantre, Alain; Boeuf, Frédéric; Seassal, Christian; Ben Bakir, Badhise

    2017-02-01

    In this paper, the 200mm silicon-on-insulator (SOI) platform is used to demonstrate the monolithic co-integration of hybrid III-V/silicon Distributed Bragg Reflector (DBR) tunable lasers and silicon Mach-Zehnder modulator (MZMs), to achieve fully integrated hybrid transmitters for silicon photonics. The design of each active component, as well as the fabrication process steps of the whole architecture are described in details. Data transmission rate up to 25Gb/s has been reached for transmitters using MZMs with active lengths of 2mm and 4mm. Extinction ratios of respectively 2.9dB and 4.7dB are obtained by applying drive voltages of 2.5V peak-to-peak on the MZMs. 25Gb/s data transmission is demonstrated at 1303.5nm and 1315.8nm, with the possibility to tune the operating wavelength by up to 8.5nm in each case, by using metallic heaters above the lasers Bragg reflectors.

  20. Hybrid wide-band, low-phase-noise scheme for Raman lasers in atom interferometry by integrating an acousto-optic modulator and a feedback loop.

    Science.gov (United States)

    Wang, Kai; Yao, Zhanwei; Li, Runbing; Lu, Sibin; Chen, Xi; Wang, Jin; Zhan, Mingsheng

    2016-02-10

    We report a hybrid scheme for phase-coherent Raman lasers with low phase noise in a wide frequency range. In this scheme, a pair of Raman lasers with a frequency difference of 3.04 GHz is generated by the ±1-order diffracted lights of an acousto-optic modulator (1.52 GHz), where a feedback loop is simultaneously applied for suppressing the phase noise. The beat width of the Raman lasers is narrower than 3 Hz. In the low-frequency range, the phase noise of the Raman lasers is suppressed by 35 dB with the feedback. The phase noise is less than -109  dBc/Hz in the high-frequency range. The sensitivity of an atom gyroscope employing the hybrid Raman lasers can be implicitly improved 10 times. Due to the better high-frequency response, the sensitivity is not limited by the durations of Raman pulses. This work is important for improving the performance of atom-interferometer-based measurements.

  1. “Direct modulation of a hybrid III-V/Si DFB laser with MRR filtering for 22.5-Gb/s error-free dispersion-uncompensated transmission over 2.5-km SSMF

    DEFF Research Database (Denmark)

    Cristofori, Valentina; Da Ros, Francesco; Ding, Yunhong;

    2016-01-01

    Error-free and penalty-free transmission over 2.5 km SSMF of a 22.5 Gb/s data signal from a directly modulated hybrid III-V/Si DFB laser is achieved by enhancing the dispersion tolerance using a silicon micro-ring resonator....

  2. “Direct modulation of a hybrid III-V/Si DFB laser with MRR filtering for 22.5-Gb/s error-free dispersion-uncompensated transmission over 2.5-km SSMF

    DEFF Research Database (Denmark)

    Cristofori, Valentina; Da Ros, Francesco; Ding, Yunhong

    2016-01-01

    Error-free and penalty-free transmission over 2.5 km SSMF of a 22.5 Gb/s data signal from a directly modulated hybrid III-V/Si DFB laser is achieved by enhancing the dispersion tolerance using a silicon micro-ring resonator....

  3. Design and test of the Digital Opto Hybrid Module for the CMS Tracker Inner Barrel and Disks.

    CERN Document Server

    Benotto, Franco; D'Alessandro, Raffaello; Demaria, Natale; DeRobertis, G; Mersi, Stefano

    2008-01-01

    One of the most important tasks to be performed in the CMS Tracker detector is the communication between hundreds of silicon modules and the central Control System under the supervision of the Data Acquisition System. To manage such complexity, modules are grouped in a hierarchical structure. Each group is controlled by a Communication and Control Unit (CCU). Several CCU form a ring with a Front End Controller as master. The entire Tracker Inner Barrel and Disks detector contains roughly 100 such rings called Control Rings. A description is given here of the implemented ring architecture for the detector and of the solutions found to provide a reliable and easy way to interconnect these groups.

  4. Strategic modulation of the photonic properties of conjugated organometallic Pt-Ir polymers exhibiting hybrid CT-excited states.

    Science.gov (United States)

    Soliman, Ahmed M; Zysman-Colman, Eli; Harvey, Pierre D

    2015-04-01

    Polymer 6, ([trans-Pt(PBu3 )2 (C≡C)2 ]-[Ir(dFMeppy)2 (N^N)](PF6 ))n , (([Pt]-[Ir](PF6 ))n ; N^N = 5,5'-disubstituted-2,2'-bipyridyl; dFMeppy = 2-(2,4-difluoro-phenyl)-5-methylpyridine) is prepared along with model compounds. These complexes are investigated by absorption and emission spectroscopy and their photophysical and electrochemical properties are measured and compared with their corresponding non fluorinated complexes. Density functional theory (DFT) and time-dependent DFT computations corroborate the nature of the excited state as being a hybrid between the metal-to-ligand charge transfer ((1,3) MLCT) for the trans-Pt(PBu3 )2 (C≡CAr)2 unit, [Pt] and the metal-to-ligand/ligand-to-ligand' charge transfer ((1,3) ML'CT/LL'CT) for [Ir] with L = dFMeppy. Overall, the fluorination of the phenylpyridine group expectedly does not change the nature of the excited state but desirably induces a small blue shift of the absorption and emission bands along a slight decrease in emission quantum yields and lifetimes.

  5. Novel alkylphospholipid-DTC hybrids as promising agents against endocrine related cancers acting via modulation of Akt-pathway.

    Science.gov (United States)

    Jangir, Santosh; Bala, Veenu; Lal, Nand; Kumar, Lalit; Sarswat, Amit; Kumar, Amit; Hamidullah; Saini, Karan S; Sharma, Vikas; Verma, Vikas; Maikhuri, Jagdamba P; Konwar, Rituraj; Gupta, Gopal; Sharma, Vishnu L

    2014-10-01

    A new series of 2-(alkoxy(hydroxy)phosphoryloxy)ethyl dialkylcarbodithioate derivatives was synthesized and evaluated against endocrine related cancers, acting via modulation of Akt-pathway. Eighteen compounds were active at 7.24-100 μM against MDA-MB-231 or MCF-7 cell lines of breast cancer. Three compounds (14, 18 and 22) were active against MCF-7 cells at IC50 significantly better than miltefosine and most of the compounds were less toxic towards non-cancer cell lines, HEK-293. On the other hand, twelve compounds exhibited cell growth inhibiting activity against prostate cancer cell lines, either PC-3 or DU-145 at 14.69-95.20 μM. While nine of these were active against both cell lines. The most promising compounds 14 and 18 were about two and five fold more active than miltefosine against DU-145 and MCF-7 cell lines respectively and significantly down regulated phospho-Akt. Possibly anti-cancer and pro-apoptotic activity was mostly due to blockade of Akt-pathway.

  6. Hybrid and Etch-Less Electrooptic Waveguide Modulator Based on Photo-Bleaching and Strain Induced Optical Waveguide Technique in Polymer.

    Science.gov (United States)

    Kim, Richard; Kang, Byeong-Mo; Jeong, Woon-Jo; Jung, Yang-June; Park, Hyuk-Reol; Kim, Chang-Dae; So, Soon-Youl; Lee, Jin; Park, Gye-Choon; Park, Yongjun

    2016-02-01

    A hybrid and etchless electrooptic (EO) polymer waveguide modulator based on both a photo-bleaching-induced optical waveguide (PBOW) and a strain-induced optical waveguide (SIOW) is described. The SIOW is defined by a metal strip line stressor deposited on top of the upper cladding that introduces the refractive index change within the core region. The PBOW technique is used to form an optical waveguide which is based on a photo-bleaching process, known as a photo-oxidation that is an irreversible decomposition of EO material, resulting in a permanent decrease in index of refraction. It is shown that this proposed fabrication idea combining two etchless techniques can be applicable to a wide range of polymer photonic integrated circuits. Preliminary results obtained from fabricated devices reveal that their half-wave voltage are ranging from 8 V to 10 V, their extinction ratio exhibits more than 15 dB, and the fiber-to-waveguide-to-lens loss is estimated to be ~9.5 dB for TM polarization at 1.55/m wavelength in the active interaction of ~1.5 cm long.

  7. Cross-Layer Approach using k-NN Based Adaptive Modulation Coding (AMC and Incremental Redundancy Hybrid Automatic Repeat Request (IR-HARQ for MIMO

    Directory of Open Access Journals (Sweden)

    J. Sofia Priya Dharshini

    2014-09-01

    Full Text Available In MIMO Technology, a cross layer design enhances the spectral efficiency, reliability and throughput of the network. In this paper, a cross-layer approach using k-NN based Adaptive Modulation Coding (AMC and Incremental Redundancy Hybrid Automatic Repeat Request (IR-HARQ is proposed for MIMO Systems. The proposed cross layer approach connects physical layer and data link layer to enhance the performance of MIMO network. By means of MIMO fading channels, the coded symbols are forwarded in the physical layer on a frame by frame fashion subsequently using Space Time Block Coding (STBC. The receiver computes the signal to noise ratio (SNR and forwards back to the AMC controller. The controller selects a suitable MCS for the next transmission through k-NN classifier supervised learning algorithm. IR-HARQ is utilized at the data link layer to regulate packet retransmissions. The obtained results prove that the proposed technique has better performance in terms of throughput, BER and spectral efficiency

  8. 2.3-MW Medium-Voltage, Three-Level Wind Energy Inverter Applying a Unique Bus Structure and 4.5-kV Si/SiC Hybrid Isolated Power Modules: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Erdman, W.; Keller, J.; Grider, D.; VanBrunt, E.

    2014-11-01

    A high-efficiency, 2.3-MW, medium-voltage, three-level inverter utilizing 4.5-kV Si/SiC (silicon carbide) hybrid modules for wind energy applications is discussed. The inverter addresses recent trends in siting the inverter within the base of multimegawatt turbine towers. A simplified split, three-layer laminated bus structure that maintains low parasitic inductances is introduced along with a low-voltage, high-current test method for determining these inductances. Feed-thru bushings, edge fill methods, and other design features of the laminated bus structure provide voltage isolation that is consistent with the 10.4-kV module isolation levels. Inverter efficiency improvement is a result of the (essential) elimination of the reverse recovery charge present in 4.5-kV Si PIN diodes, which can produce a significant reduction in diode turn-off losses as well as insulated-gate bipolar transistor (IGBT) turn-on losses. The hybrid modules are supplied in industry-standard 140 mm x 130 mm and 190 mm x 130 mm packages to demonstrate direct module substitution into existing inverter designs. A focus on laminated bus/capacitor-bank/module subassembly level switching performance is presented.

  9. OPTESIM, a versatile toolbox for numerical simulation of electron spin echo envelope modulation (ESEEM) that features hybrid optimization and statistical assessment of parameters.

    Science.gov (United States)

    Sun, Li; Hernandez-Guzman, Jessica; Warncke, Kurt

    2009-09-01

    Electron spin echo envelope modulation (ESEEM) is a technique of pulsed-electron paramagnetic resonance (EPR) spectroscopy. The analyis of ESEEM data to extract information about the nuclear and electronic structure of a disordered (powder) paramagnetic system requires accurate and efficient numerical simulations. A single coupled nucleus of known nuclear g value (g(N)) and spin I=1 can have up to eight adjustable parameters in the nuclear part of the spin Hamiltonian. We have developed OPTESIM, an ESEEM simulation toolbox, for automated numerical simulation of powder two- and three-pulse one-dimensional ESEEM for arbitrary number (N) and type (I, g(N)) of coupled nuclei, and arbitrary mutual orientations of the hyperfine tensor principal axis systems for N>1. OPTESIM is based in the Matlab environment, and includes the following features: (1) a fast algorithm for translation of the spin Hamiltonian into simulated ESEEM, (2) different optimization methods that can be hybridized to achieve an efficient coarse-to-fine grained search of the parameter space and convergence to a global minimum, (3) statistical analysis of the simulation parameters, which allows the identification of simultaneous confidence regions at specific confidence levels. OPTESIM also includes a geometry-preserving spherical averaging algorithm as default for N>1, and global optimization over multiple experimental conditions, such as the dephasing time (tau) for three-pulse ESEEM, and external magnetic field values. Application examples for simulation of (14)N coupling (N=1, N=2) in biological and chemical model paramagnets are included. Automated, optimized simulations by using OPTESIM lead to a convergence on dramatically shorter time scales, relative to manual simulations.

  10. Enabling short fragments for uncoordinated spread spectrum communication

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Pöpper, Christina; Capkun, Srdjan

    2014-01-01

    message is not only feasible but also efficient: it can be completed in polynomial time in the size of the message, even if the jammer is computationally resourceful. We demonstrate the protocol efficiency by simulating the reassembly process at the link layer under different design parameters....

  11. SPREAD SPECTRUM WATERMARK DETECTION IN DRT-DOMAIN

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The traditional correlation-based detector is optimal only for Gaussian data, but the Laplacian Probability Density Function (PDF) is more appropriate to model the coefficients in the Discrete Ridgelet Transform (DRT) domain. An additive maximum-likelihood detector based on the Laplacian PDF is analyzed and the theoretical result of its performance is given. The experiments show that the error of the Laplacian model for the DRT coefficients of many images is smaller than that of the Gaussian model. The experiments also prove that the Laplacian detector is superior to the traditional correlation-based detector.

  12. Direct sequence spread spectrum CDMA in shared spectrum applications

    Science.gov (United States)

    Schilling, Donald L.; Milstein, Laurence B.; Pickholtz, Raymond L.; Miller, Frank

    1991-01-01

    Personal Communication Network (PCN) is an entirely wireless communication system with the capability of assessing the wired telephone system to reach anyone processing only a wired telephone. It is expected to compete with the existing mobile cellular system which connects directly to the wired telephone system. While many PCN systems employ TDMA technology, the PCN system described here uses Broadband CDMA (BCDMA(sup SM)) which is capable of sharing the spectrum with other users and which is extremely resistant to fading caused by multipath.

  13. SINGLE TONE JAMMING ELIMINATION SCHEME OF MULTICARRIER SPREAD SPECTRUM SYSTEM

    Institute of Scientific and Technical Information of China (English)

    Ying Xiaofan; Chu Zhenyong; Tian Hongxin; Yi Kechu

    2004-01-01

    The proposed scheme is based on Discrete Fourier Transform (DFT) domain processing. The key technology of this scheme is jamming parameters' accurate estimation and jamming reconstruction. Compared with the "threshold exciser" schemeithe proposed scheme can eliminate more jamming energy on the whole frequency band with the minimum loss of useful signal energy. As shown in the research and simulation, the proposed scheme is much better than the "threshold exciser" scheme, especially in the case of high power jamming whereas the "threshold exciser" scheme might be invalid.

  14. Side Information in Spread-Spectrum Packet Radio Networks

    Science.gov (United States)

    1991-06-21

    coaft~ biof nf ormaion. $an C40tf~i rgading th. bwdieft eistat ofy Aŕ auti o fIII"IIII w to IInoq -Saaunf Sw-f OW90rtfo o I ns ovn atii j ntml..dii W...probabilities listed in Table 2 are not changed . Recall that these are the probabilities that a symbol is in error given the type of interference present...interval. So,pj,p are not changed and ais taken to be a’andflis taken to be 3’. To be able to compare the side information schemes, certain precautions must

  15. Binary Sequences for Spread-Spectrum Multiple-Access Communication

    Science.gov (United States)

    1977-08-01

    represents an n-stage linear feedback shift register where 1 and for 0 < i < n, fi 1 if there is a feedback th "tap connected to the i stage of the...u:045,. v:075; k Efl and 1fl ;P 31. Wk 5 10 20 9 18 U V 0 2006 1942 2050 1846 1830 1742 1702 5 1854 2578 2470 1918 2190 2142 10 1898 2406 1830 1846

  16. Ultrasound Modulated Bioluminescence Tomography

    CERN Document Server

    Bal, Guillaume

    2013-01-01

    We propose a method to reconstruct the density of a luminescent source in a highly-scattering medium from ultrasound modulated optical measurements. Our approach is based on the solution to a hybrid inverse source problem for the diffusion equation.

  17. From 1D chain to 3D network: a new family of inorganic-organic hybrid semiconductors MO3(L)(x) (M = Mo, W; L = organic linker) built on perovskite-like structure modules.

    Science.gov (United States)

    Zhang, Xiao; Hejazi, Mehdi; Thiagarajan, Suraj J; Woerner, William R; Banerjee, Debasis; Emge, Thomas J; Xu, Wenqian; Teat, Simon J; Gong, Qihan; Safari, Ahmad; Yang, Ronggui; Parise, John B; Li, Jing

    2013-11-20

    MO3 (M = Mo, W) or VI-VI binary compounds are important semiconducting oxides that show great promise for a variety of applications. In an effort to tune and enhance their properties in a systematic manner we have applied a designing strategy to deliberately introduce organic linker molecules in these perovskite-like crystal lattices. This approach has led to a wealth of new hybrid structures built on one-dimensional (1D) and two-dimensional (2D) VI-VI modules. The hybrid semiconductors exhibit a number of greatly improved properties and new functionality, including broad band gap tunability, negative thermal expansion, largely reduced thermal conductivity, and significantly enhanced dielectric constant compared to their MO3 parent phases.

  18. Nanolayer-transfer method of TiO2 slot layers and its application for fabricating hybrid electro-optic polymer/TiO2 vertical slot waveguide modulators

    Science.gov (United States)

    Jouane, Youssef; Enami, Yasufumi

    2017-09-01

    We have presented a alternative soft process named nanolayer transfer (NLT), to fabricate hybrid electro-optic polymer/TiO2 vertical slot waveguide modulators. We have transfered successfully a 100 nm thick TiO2 line pattern layer on sol-gel silica cladding layer, and at the same time we have created a line waveguide in sol-gel silica cladding layer with the widths up to 1 μ m. The sol-gel silica layer is hydrolyzed and cross-linked, creating a SiO2 network with a highly oriented polycrystalline film of TiO2 in which all crystals grow in the main preferential direction. NLT method also enables to control the high refractive index with better crystallization and lower optical propagation loss of transferred TiO2 slot layer, which allows us to have a higher optical mode confinement of EO polymer ensuring the feasibility of the EO device modulators.

  19. High dynamic range low noise amplifier and wideband hybrid phase shifter for SiGe BiCMOS phased array T/R modules

    OpenAIRE

    2014-01-01

    Transmit/Receive Module (T/R Module) is one of the most essential blocks for Phased Array Radio Detection and Ranging (RADAR) system; due to being very influential on system level performance. To achieve high performance specifications, T/R Module structures are constructed with using III-V devices, which has some significant disadvantages; they are costly, and also consume too much area and power. As a result, application area of T/R Module is mainly restricted with the military and dedicate...

  20. Hybrid Baryons

    CERN Document Server

    Page, P R

    2003-01-01

    We review the status of hybrid baryons. The only known way to study hybrids rigorously is via excited adiabatic potentials. Hybrids can be modelled by both the bag and flux-tube models. The low-lying hybrid baryon is N 1/2^+ with a mass of 1.5-1.8 GeV. Hybrid baryons can be produced in the glue-rich processes of diffractive gamma N and pi N production, Psi decays and p pbar annihilation.

  1. Construction method of spread-spectrum code based on multi-scroll JerK-Chua chaos and self-coded%基于多涡卷 JerK-Chua 混沌和自编码的扩频码构造方法

    Institute of Scientific and Technical Information of China (English)

    张晓蓉; 吴成茂; 李文学

    2015-01-01

    In order to improve the reliability and safety of information transmission in the spread spectrum communication system,a kind of spreading code constructed by means of a combination of generalized complex multi-scroll Jerk-Chua chaos and self-coded is proposed.Firstly a new nonlinear fusion function citing by con-struct ideas of two-dimensional Henon transform and discrete standard mapping is produced.Then the complex multi-scroll Jerk-Chua chaos sequence is combined with the auto regressive (AR)self-coded sequence by the fu-sion function to generate a high quality composite random sequence as a new spreading code.Finally Matlab simulation tests show that the algorithm generating random sequence has the higher complexity and the better randomness and correlation compared with existing methods.Bit error rate has been improved in spread spec-trum communication system.The transmission of information security under high security and dynamic chan-ging conditions can be met.%为了提高扩频通信系统信息传输的可靠性和安全性,提出一种基于复合多涡卷 Jerk-Chua 混沌与自编码相融合的扩频码构造算法。首先引用二维 Henon 变换和离散标准映射的构造思想产生一种新的非线性融合函数,其次通过该融合函数将复合多涡卷 Jerk-Chua 混沌产生的随机序列与自回归自编码随机序列相融合产生高质量复合随机序列作为新的扩频码。最后通过 Matlab 仿真测试表明,该算法相比现有方法得到的随机序列复杂度更高、随机性和相关性更好,应用于扩频通信系统中的误码率得到了一定改善,能够满足高安全性和高动态变化环境要求的通信系统信息安全保密的传输。

  2. Power Budget Analysis of Colorless Hybrid WDM/TDM-PON Scheme Using Downstream DPSK and Re-modulated Upstream OOK Data Signals

    Science.gov (United States)

    Khan, Yousaf; Afridi, Muhammad Idrees; Khan, Ahmed Mudassir; Rehman, Waheed Ur; Khan, Jahanzeb

    2014-09-01

    Hybrid wavelength-division multiplexed/time-division multiplexed passive optical access networks (WDM/TDM-PONs) combine the advance features of both WDM and TDM PONs to provide a cost-effective access network solution. We demonstrate and analyze the transmission performances and power budget issues of a colorless hybrid WDM/TDM-PON scheme. A 10-Gb/s downstream differential phase shift keying (DPSK) and remodulated upstream on/off keying (OOK) data signals are transmitted over 25 km standard single mode fiber. Simulation results show error free transmission having adequate power margins in both downstream and upstream transmission, which prove the applicability of the proposed scheme to future passive optical access networks. The power budget confines both the PON splitting ratio and the distance between the Optical Line Terminal (OLT) and Optical Network Unit (ONU).

  3. 一种应用于电动汽车的复合电池能源模块%A hybrid battery energy module for electric vehicles

    Institute of Scientific and Technical Information of China (English)

    王涛; 韦秀磊; 林秋丰; 董小平

    2012-01-01

    The existing battery ower module for electric vehicle can not meet the actual vehicle performance requirements. A new battery power module is carried out in this paper, which is composed of the li-ion batteries and zinc-air fuel cell. Firstly, the different solutions about the vehicle energy short supply are proposed by the global automobile companies. The prospective of electric vehicles becomes optimistic. Secondly, the bottle neck for power battery module applied in pure electric vehicle is analyzed. A new battery power module for electric vehicle is put forward; then, the advantage of the power battery energy-module is analyzed, the feasibility of the module used in electric vehicles is pointed out in the future. Finally, the next specific work on the development of the module is introduced.%就目前现有的电动汽车电池能源模块无法满足车辆实际性能需求的问题,提出了一种全新的电动车用电池能源模块,该模块是由锂离子电池与锌空气燃料电池进行配合组成的.首先分析了全球各个汽车企业就目前车用能源日趋紧张问题所提出的不同解决方案,指出了电动汽车发展前景乐观;其次,分析了应用于纯电动汽车的电池能源模块存在的瓶颈,提出了一个全新的电动车用电池能源模块的构想;然后,对该动力电池能源模块的优势进行分析,指出了该模块未来应用于电动汽车上的可行性;最后,就下一步开发该模块所要做的具体工作进行了介绍.

  4. Structure and interdomain interactions of a hybrid domain: a disulphide-rich module of the fibrillin/LTBP superfamily of matrix proteins.

    Science.gov (United States)

    Jensen, Sacha A; Iqbal, Sarah; Lowe, Edward D; Redfield, Christina; Handford, Penny A

    2009-05-13

    The fibrillins and latent transforming growth factor-beta binding proteins (LTBPs) form a superfamily of structurally-related proteins consisting of calcium-binding epidermal growth factor-like (cbEGF) domains interspersed with 8-cysteine-containing transforming growth factor beta-binding protein-like (TB) and hybrid (hyb) domains. Fibrillins are the major components of the extracellular 10-12 nm diameter microfibrils, which mediate a variety of cell-matrix interactions. Here we present the crystal structure of a fibrillin-1 cbEGF9-hyb2-cbEGF10 fragment, solved to 1.8 A resolution. The hybrid domain fold is similar, but not identical, to the TB domain fold seen in previous fibrillin-1 and LTBP-1 fragments. Pairwise interactions with neighboring cbEGF domains demonstrate extensive interfaces, with the hyb2-cbEGF10 interface dependent on Ca(2+) binding. These observations provide accurate constraints for models of fibrillin organization within the 10-12 nm microfibrils and provide further molecular insights into how Ca(2+) binding influences the intermolecular interactions and biomechanical properties of fibrillin-1.

  5. Antimicrobial activity of eumelanin-based hybrids: The role of TiO2 in modulating the structure and biological performance.

    Science.gov (United States)

    Vitiello, Giuseppe; Pezzella, Alessandro; Zanfardino, Anna; Silvestri, Brigida; Giudicianni, Paola; Costantini, Aniello; Varcamonti, Mario; Branda, Francesco; Luciani, Giuseppina

    2017-06-01

    Eco-friendly hybrid Eumelanin-TiO2 nanostructures, recently obtained through in situ methodology based on hydrothermal route, have shown a striking antimicrobial activity, after exposure to oxidative environment, even under visible light induction condition. Nevertheless, the role of each component in defining the efficacy of these biological properties is far from being clearly defined. Furthermore, the effect of oxidative step on hybrids structure has not yet addressed. This study aims at elucidating the role of the ratio between eumelanin precursor, 5,6-dihydroxyindole-2-carboxylic acid (DHICA), and TiO2, for its polymerization in defining morphology and structural organization of TiO2-melanin nanostructures. Furthermore, tests on a Gram-negative Escherichia coli DH5α strain under UV irradiation and even visible light allowed to assess the contribution of each component, as well as of the TiO2-DHICA charge transfer complex to overall biological performance. Finally, results of biocide characterization were combined with spectroscopic evidences to prove that oxidative treatment induces a marked structural modification in melanin thus enhancing overall antimicrobial efficacy. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Research on hybrid transmission of wired and wireless signals with dual-electrode Mach-Zender modulator%双极型MZM实现有线和无线信号的共同传输

    Institute of Scientific and Technical Information of China (English)

    张正龙; 胡宗福; 陈昱; 李源纯; 吴建武

    2011-01-01

    In the hybrid modulation scheme to wired and wireless signals with dual-electrode Mach-Zender modulator, both wired and wireless receivers obtain clear and open eye diagram after transmission over 20km of standard single-mode fiber. More pure millimeter-wave (mm-wave) can be obtained with a interleaver in the wireless receiver. Simulation results show that the bit error rate (BER) for baseband signal in the system is acceptable with dc-bias variation of+ 0.1V in the quadrature bias point.%采用双极型MZM对有线和无线信号实行混合调制,调制后的信号经20km标准单模光纤传输,有线和无线接收端均获得清晰张开的眼图.在无线接收端使用交叉复用器以获得更纯净的毫米波.在仿真环境下微调直流偏置电压,结果显示在正交偏置点改变±0.1V,有线信号的误码率仍在系统可接受误码率范围之内.

  7. Ultrasound-modulated bioluminescence tomography

    Science.gov (United States)

    Bal, Guillaume; Schotland, John C.

    2014-03-01

    We propose a method to reconstruct the density of a luminescent source in a highly scattering medium from ultrasound-modulated optical measurements. Our approach is based on the solution to a hybrid inverse source problem for the diffusion equation.

  8. Energy Efficiency Comparison between Hydraulic Hybrid and Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Jia-Shiun Chen

    2015-05-01

    Full Text Available Conventional vehicles tend to consume considerable amounts of fuel, which generates exhaust gases and environmental pollution during intermittent driving cycles. Therefore, prospective vehicle designs favor improved exhaust emissions and energy consumption without compromising vehicle performance. Although pure electric vehicles feature high performance and low pollution characteristics, their limitations are their short driving range and high battery costs. Hybrid electric vehicles (HEVs are comparatively environmentally friendly and energy efficient, but cost substantially more compared with conventional vehicles. Hydraulic hybrid vehicles (HHVs are mainly operated using engines, or using alternate combinations of engine and hydraulic power sources while vehicles accelerate. When the hydraulic system accumulator is depleted, the conventional engine reengages; concurrently, brake-regenerated power is recycled and reused by employing hydraulic motor–pump modules in circulation patterns to conserve fuel and recycle brake energy. This study adopted MATLAB Simulink to construct complete HHV and HEV models for backward simulations. New European Driving Cycles were used to determine the changes in fuel economy. The output of power components and the state-of-charge of energy could be retrieved. Varying power component models, energy storage component models, and series or parallel configurations were combined into seven different vehicle configurations: the conventional manual transmission vehicle, series hybrid electric vehicle, series hydraulic hybrid vehicle, parallel hybrid electric vehicle, parallel hydraulic hybrid vehicle, purely electric vehicle, and hydraulic-electric hybrid vehicle. The simulation results show that fuel consumption was 21.80% lower in the series hydraulic hybrid vehicle compared to the series hybrid electric vehicle; additionally, fuel consumption was 3.80% lower in the parallel hybrid electric vehicle compared to the

  9. Hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    West, J.G.W. [Electrical Machines (United Kingdom)

    1997-07-01

    The reasons for adopting hybrid vehicles result mainly from the lack of adequate range from electric vehicles at an acceptable cost. Hybrids can offer significant improvements in emissions and fuel economy. Series and parallel hybrids are compared. A combination of series and parallel operation would be the ideal. This can be obtained using a planetary gearbox as a power split device allowing a small generator to transfer power to the propulsion motor giving the effect of a CVT. It allows the engine to run at semi-constant speed giving better fuel economy and reduced emissions. Hybrid car developments are described that show the wide range of possible hybrid systems. (author)

  10. SU-E-P-06: A Novel Hybrid Planning Approach to Allow More Patients Benefited by the Intensity Modulated Proton Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, S [UT MD Anderson Cancer Center, Tianjin Medical University Cancer Instit, Houston, TX (United States); Liao, L [UT MD Anderson Cancer Center, University of Houston, Houston, TX (United States); Li, Y [Varian Medical Systems, Houston, TX (United States); Wang, X; Sahoo, N; Liao, Z; Grosshans, D; Frank, S [MD Anderson Cancer Center, Houston, TX (United States); Li, H [M.D. Anderson Cancer Center, Houston, TX (United States); Zhu, X; Chang, J; Zhang, X [UT MD Anderson Cancer Center, Houston, TX (United States); Gillin, M [MD Anderson Cancer Ctr., Houston, TX (United States); Hojo, Y [UT MD Anderson cancer center, Houston, TX (United States); Sun, J [UT MD Anderson cancer center, Tianjin Medical University Cancer Institute a, Houston, TX (United States)

    2014-06-01

    Purpose: We report a hybrid scattering and scanning beam delivery approach, termed as (HimpsPT), which demonstrated that majority IMPT delivery can be potentially replaced with hybrid IMPT and PSPT delivery with similar or better plan quality. Methods: Three representative clinical cases, including head and neck (HN), skull base chordoma (CNS) and lung cancer, treated in MDACC Proton Therapy Center with IMPT were retrospectively redesigned using HimpsPT. The PSPT plans are designed with the same prescriptions as those of IMPT plans. The whole treatment can be delivered by either alternating or sequential PSPT and IMPT delivery. The dosimetric data and dose distributions of HimpsPT plans are compared with those of IMPT plans. We also performed a worst-case robust analysis for all plans. Results: The target coverages for all cases are comparable. For the HN case, the mean dose of esophagus larynx, left parotid and right submandibular, oral cavity V20, the max dose of cord is 18.0, 36.1, 23.6, 47.2, 0.1, 31.7 Gy in HimpsPT plan, and 25.5, 33.8, 24.9, 49.1, 0.2, 33.8 Gy in IMPT plan. For the lung case, the lung V5, V20, V30, mean lung dose, heart V40, esophagus V70, cord maximum dose are 50.5%, 37.0%, 31.7%, 21.3 Gy, 7.2%, 4.9%, 35.5 Gy in HimpsPT plan, and 55.4%, 36.7%, 30.1%, 21.3 Gy, 7.7%, 8.4%, 36.8Gy in IMPT plans. For the CNS case, brainstem maximum dose is 50.5 Gy in HimpsPT plan and 55.4 Gy in IMPT plan due to sharp penumbra offered by the aperture of the PSPT plan in HimpsPT technique. Conclusion: For majority disease sites, the dosimetric advantage of IMPT technique can be achieved by the hybrid PSPT and IMPT technique, which enables the centers equipped with both scattering and scanning beam facilities to treat more patients which can be benefited by the scanning beam.

  11. Sustained release of hepatocyte growth factor by cationic self-assembling peptide/heparin hybrid hydrogel improves β-cell survival and function through modulating inflammatory response

    Science.gov (United States)

    Liu, Shuyun; Zhang, Lanlan; Cheng, Jingqiu; Lu, Yanrong; Liu, Jingping

    2016-01-01

    Inflammatory response is a major cause of grafts dysfunction in islet transplantation. Hepatocyte growth factor (HGF) had shown anti-inflammatory activity in multiple diseases. In this study, we aim to deliver HGF by self-assembling peptide/heparin (SAP/Hep) hybrid gel to protect β-cell from inflammatory injury. The morphological and slow release properties of SAPs were analyzed. Rat INS-1 β-cell line was treated with tumor necrosis factor α in vitro and transplanted into rat kidney capsule in vivo, and the viability, apoptosis, function, and inflammation of β-cells were evaluated. Cationic KLD1R and KLD2R self-assembled to nanofiber hydrogel, which showed higher binding affinity for Hep and HGF because of electrostatic interaction. Slow release of HGF from cationic SAP/Hep gel is a two-step mechanism involving binding affinity with Hep and molecular diffusion. In vitro and in vivo results showed that HGF-loaded KLD2R/Hep gel promoted β-cell survival and insulin secretion, and inhibited cell apoptosis, cytokine release, T-cell infiltration, and activation of NFκB/p38 MAPK pathways in β-cells. This study suggested that SAP/Hep gel is a promising carrier for local delivery of bioactive proteins in islet transplantation. PMID:27729786

  12. Thermal management optimization of an air-cooled Li-ion battery module using pin-fin heat sinks for hybrid electric vehicles

    Science.gov (United States)

    Mohammadian, Shahabeddin K.; Zhang, Yuwen

    2015-01-01

    Three dimensional transient thermal analysis of an air-cooled module that contains prismatic Li-ion cells next to a special kind of aluminum pin fin heat sink whose heights of pin fins increase linearly through the width of the channel in air flow direction was studied for thermal management of Lithium-ion battery pack. The effects of pin fins arrangements, discharge rates, inlet air flow velocities, and inlet air temperatures on the battery were investigated. The results showed that despite of heat sinks with uniform pin fin heights that increase the standard deviation of the temperature field, using this kind of pin fin heat sink compare to the heat sink without pin fins not only decreases the bulk temperature inside the battery, but also decreases the standard deviation of the temperature field inside the battery as well. Increasing the inlet air temperature leads to decreasing the standard deviation of the temperature field while increases the maximum temperature of the battery. Furthermore, increasing the inlet air velocity first increases the standard deviation of the temperature field till reaches to the maximum point, and after that decreases. Also, increasing the inlet air velocity leads to decrease in the maximum temperature of the battery.

  13. A modulating effect of Tropical Instability Wave (TIW)-induced surface wind feedback in a hybrid coupled model of the tropical Pacific

    Science.gov (United States)

    Zhang, Rong-Hua

    2016-10-01

    Tropical Instability Waves (TIWs) and the El Niño-Southern Oscillation (ENSO) are two air-sea coupling phenomena that are prominent in the tropical Pacific, occurring at vastly different space-time scales. It has been challenging to adequately represent both of these processes within a large-scale coupled climate model, which has led to a poor understanding of the interactions between TIW-induced feedback and ENSO. In this study, a novel modeling system was developed that allows representation of TIW-scale air-sea coupling and its interaction with ENSO. Satellite data were first used to derive an empirical model for TIW-induced sea surface wind stress perturbations (τTIW). The model was then embedded in a basin-wide hybrid-coupled model (HCM) of the tropical Pacific. Because τTIW were internally determined from TIW-scale sea surface temperatures (SSTTIW) simulated in the ocean model, the wind-SST coupling at TIW scales was interactively represented within the large-scale coupled model. Because the τTIW-SSTTIW coupling part of the model can be turned on or off in the HCM simulations, the related TIW wind feedback effects can be isolated and examined in a straightforward way. Then, the TIW-scale wind feedback effects on the large-scale mean ocean state and interannual variability in the tropical Pacific were investigated based on this embedded system. The interactively represented TIW-scale wind forcing exerted an asymmetric influence on SSTs in the HCM, characterized by a mean-state cooling and by a positive feedback on interannual variability, acting to enhance ENSO amplitude. Roughly speaking, the feedback tends to increase interannual SST variability by approximately 9%. Additionally, there is a tendency for TIW wind to have an effect on the phase transition during ENSO evolution, with slightly shortened interannual oscillation periods. Additional sensitivity experiments were performed to elucidate the details of TIW wind effects on SST evolution during ENSO

  14. Printed hybrid systems

    Science.gov (United States)

    Karioja, Pentti; Mäkinen, Jukka-Tapani; Keränen, Kimmo; Aikio, Janne; Alajoki, Teemu; Jaakola, Tuomo; Koponen, Matti; Keränen, Antti; Heikkinen, Mikko; Tuomikoski, Markus; Suhonen, Riikka; Hakalahti, Leena; Kopola, Pälvi; Hast, Jukka; Liedert, Ralf; Hiltunen, Jussi; Masuda, Noriyuki; Kemppainen, Antti; Rönkä, Kari; Korhonen, Raimo

    2012-04-01

    This paper presents research activities carried out at VTT Technical Research Centre of Finland in the field of hybrid integration of optics, electronics and mechanics. Main focus area in our research is the manufacturing of electronic modules and product structures with printed electronics, film-over-molding and polymer sheet lamination technologies and the goal is in the next generation of smart systems utilizing monolithic polymer packages. The combination of manufacturing technologies such as roll-to-roll -printing, injection molding and traditional component assembly is called Printed Hybrid Systems (PHS). Several demonstrator structures have been made, which show the potential of polymer packaging technology. One demonstrator example is a laminated structure with embedded LED chips. Element thickness is only 0.3mm and the flexible stack of foils can be bent in two directions after assembly process and was shaped curved using heat and pressure. The combination of printed flexible circuit boards and injection molding has also been demonstrated with several functional modules. The demonstrators illustrate the potential of origami electronics, which can be cut and folded to 3D shapes. It shows that several manufacturing process steps can be eliminated by Printed Hybrid Systems technology. The main benefits of this combination are small size, ruggedness and conformality. The devices are ideally suited for medical applications as the sensitive electronic components are well protected inside the plastic and the structures can be cleaned easily due to the fact that they have no joints or seams that can accumulate dirt or bacteria.

  15. Differential modulation of brain nicotinic acetylcholine receptor function by cytisine, varenicline, and two novel bispidine compounds: emergent properties of a hybrid molecule.

    Science.gov (United States)

    Peng, Can; Stokes, Clare; Mineur, Yann S; Picciotto, Marina R; Tian, Chengju; Eibl, Christoph; Tomassoli, Isabelle; Guendisch, Daniela; Papke, Roger L

    2013-11-01

    Partial agonist therapies for the treatment of nicotine addiction and dependence depend on both agonistic and antagonistic effects of the ligands, and side effects associated with other nAChRs greatly limit the efficacy of nicotinic partial agonists. We evaluated the in vitro pharmacological properties of four partial agonists, two current smoking cessation drugs, varenicline and cytisine, and two novel bispidine compounds, BPC and BMSP, by using defined nAChR subtypes expressed in Xenopus laevis oocytes and human embryonic kidney 293 cells. Similar to varenicline and cytisine, BPC and BMSP are partial agonists of α4β2 nAChRs, although BMSP produced very little activation of these receptors. Unlike varenicline and cytisine, BPC and BMSP showed desired low activity. BPC produced mecamylamine-sensitive steady-state activation of α4* receptors that was not evident with BMSP. We evaluated the modulation of α4*- and α7-mediated responses in rat lateral geniculate nucleus (LGN) neurons and hippocampal stratum radiatum (SR) interneurons, respectively. The LGN neurons were sensitive to a very low concentration of varenicline, and the SR interneuron responses were also sensitive to varenicline at a submicromolar concentration. Although 300 nM BPC strongly inhibited the ACh-evoked responses of LGN neurons, it did not inhibit the α7 currents of SR interneurons. Similar results were observed with 300 nM BMSP. Additionally, the bispidine compounds were efficacious in the mouse tail suspension test, demonstrating that they affect receptors in the brain when delivered systemically. Our data indicate that BPC and BMSP are promising α4β2* partial agonists for pharmacotherapeutics.

  16. Hybrid Metaheuristics

    CERN Document Server

    2013-01-01

    The main goal of this book is to provide a state of the art of hybrid metaheuristics. The book provides a complete background that enables readers to design and implement hybrid metaheuristics to solve complex optimization problems (continuous/discrete, mono-objective/multi-objective, optimization under uncertainty) in a diverse range of application domains. Readers learn to solve large scale problems quickly and efficiently combining metaheuristics with complementary metaheuristics, mathematical programming, constraint programming and machine learning. Numerous real-world examples of problems and solutions demonstrate how hybrid metaheuristics are applied in such fields as networks, logistics and transportation, bio-medical, engineering design, scheduling.

  17. Design, Analysis, and Performance of a Noise Modulated Covert Communications System

    Directory of Open Access Journals (Sweden)

    Ram M. Narayanan

    2008-09-01

    Full Text Available Ultrawideband (UWB random noise signals provide secure communications because they cannot, in general, be detected using conventional receivers and are jam-resistant. We describe the theoretical underpinnings of a novel spread spectrum technique that can be used for covert communications using transmissions over orthogonal polarization channels. The noise key and the noise-like modulated signal are transmitted over orthogonal polarizations to mimic unpolarized noise. Since the transmitted signal is featureless and appears unpolarized and noise-like, linearly polarized receivers are unable to identify, detect, or otherwise extract useful information from the signal. The wide bandwidth of the transmitting signal provides significant immunity from interference. Dispersive effects caused by the atmosphere and other factors are significantly reduced since both polarization channels operate over the same frequency band. The received signals are mixed together to accomplish demodulation. Excellent bit error rate performance is achieved even under adverse propagation conditions.

  18. Design, Analysis, and Performance of a Noise Modulated Covert Communications System

    Directory of Open Access Journals (Sweden)

    Chuang Jack

    2008-01-01

    Full Text Available Ultrawideband (UWB random noise signals provide secure communications because they cannot, in general, be detected using conventional receivers and are jam-resistant. We describe the theoretical underpinnings of a novel spread spectrum technique that can be used for covert communications using transmissions over orthogonal polarization channels. The noise key and the noise-like modulated signal are transmitted over orthogonal polarizations to mimic unpolarized noise. Since the transmitted signal is featureless and appears unpolarized and noise-like, linearly polarized receivers are unable to identify, detect, or otherwise extract useful information from the signal. The wide bandwidth of the transmitting signal provides significant immunity from interference. Dispersive effects caused by the atmosphere and other factors are significantly reduced since both polarization channels operate over the same frequency band. The received signals are mixed together to accomplish demodulation. Excellent bit error rate performance is achieved even under adverse propagation conditions.

  19. Hybrid intermediaries

    OpenAIRE

    Cetorelli, Nicola

    2014-01-01

    I introduce the concept of hybrid intermediaries: financial conglomerates that control a multiplicity of entity types active in the "assembly line" process of modern financial intermediation, a system that has become known as shadow banking. The complex bank holding companies of today are the best example of hybrid intermediaries, but I argue that financial firms from the "nonbank" space can just as easily evolve into conglomerates with similar organizational structure, thus acquiring the cap...

  20. Hybrid composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available effect was observed for the elongation at break of the hybrid composites. The impact strength of the hybrid composites increased with the addition of glass fibres. The tensile and impact properties of thermoplastic natural rubber reinforced short... panels made from conventional structural materials. Figure 3 illustrates the performance of cellular biocomposite panels against conventional systems used for building and residential construction, namely a pre- cast pre-stressed hollow core concrete...

  1. The hybrid BCI

    Directory of Open Access Journals (Sweden)

    Gert Pfurtscheller

    2010-04-01

    Full Text Available Nowadays, everybody knows what a hybrid car is. A hybrid car normally has 2 engines, its main purpose being to enhance energy efficiency and reduce CO2 output. Similarly, a typical hybrid brain-computer interface (BCI is also composed of 2 BCIs or at least one BCI and another system. Such a hybrid BCI, like any BCI, must fulfil the following four criteria: (i the device must rely on signals recorded directly from the brain; (ii there must be at least one recordable brain signal that the user can intentionally modulate to effect goal-directed behaviour; (iii real time processing; and (iv the user must obtain feedback. This paper introduces some hybrid BCIs which have already been published or are currently in development or validation, and some concepts for future work. The BCIs described classify 2 EEG patterns: One is the event-related (desynchronisation (ERD, ERS of sensorimotor rhythms, and the other is the steady-state visual evoked potential (SSVEP. The hybrid BCI can either have more than one input whereby the inputs are typically processed simultaneously or operate 2 systems sequentially, whereby the first system can act as a “brain switch”. In the case of self-paced operation of a SSVEP-based hand orthosis control with an motor imagery-based switch it was possible to reduce the rate of false positives during resting periods by about 50% compared to the SSVEP BCI alone. It is shown that such a brain switch can also rely on hemodynamic changes measured through near-infrared spectroscopy (NIRS. Another interesting approach is a hybrid BCI with simultaneous operations of ERD- and SSVEP-based BCIs. Here it is important to prove the existing promising offline simulation results with online experiments. Hybrid BCIs can also use one brain signal and another input. Such an additional input can be a physiological signal like the heart rate but also a signal from an external device like, an eye gaze control system.

  2. A Space Vector Pulse Width Modulation Based Optimization Control Strategy for Hybrid Cascaded 7-Level Inverter%基于SVPWM调制的混合级联七电平逆变器优化控制策略

    Institute of Scientific and Technical Information of China (English)

    耿俊利; 梁晖; 金渊

    2015-01-01

    The working modes of hybrid cascaded 7-level inverter with dead zone are analyzed and analysis results show that there are different jumping situations of inverter voltage under different working modes. On this basis, based on space vector pulse width modulation (SVPWM) strategy an optimal control method is proposed. In the premise that the supporting capacitor voltage is under the control, through analyzing the jumping of output voltage level and the valve action times corresponding to the charging/discharging process of supporting capacity voltage switching in each interval an optimal control strategy to reduce the jumping of output voltage is put forward; besides, the output voltage loss due to the existence of dead zone time is analyzed and calculated according to the principle of volt-second balance, and the dead zone compensation for its modulation wave is performed. The effectiveness of the proposed control strategy is validated by results of simulation and experiments.%分析混合级联七电平逆变器带死区时的工作模式,不同工作模式下其逆变器电压的跳变情况不同。在此基础上,提出了基于空间矢量脉冲调制(space vector pulse width modulation,SVPWM)策略的优化控制方法。以控制支撑电容电压为前提,通过对每个区间支撑电容充放电切换过程所对应的开关动作次数、输出电压电平跳变情况的分析,提出了一种减小输出电压跳变的优化控制策略;此外,分析了死区时间的存在所带来的输出电压损失,根据伏秒平衡原理进行计算,并对其调制波进行死区补偿。仿真及实验结果验证了该控制策略的有效性。

  3. Digital Modulator and Demodulator IC for RFID Tag Employing DSSS and Barker Code

    Directory of Open Access Journals (Sweden)

    L. F. Rahman

    2012-11-01

    Full Text Available Radio frequency identification (RFID is lagging behind because of vendor specific solutions and expensiveimplementation cost. In particular, the reader is the most expensive part. A WiFi compatible tag was proposed to usethe WNIC as an RFID reader. However, no specific modulator or demodulator was suggested. This paper analyzesthe various IEEE 802.11 standards and their modulation and coding techniques keeping the desired properties of anRFID system in consideration. After the analysis, a digital modulator and demodulator for RFID tag in IEEE 802.11protocol employing Direct Sequence Spread-Spectrum (DSSS and coding is proposed. A MOD-11 synchronouscounter is designed for the 11-bit encoder which generates the desired Barker code. Data are multiplied with thisBarker code to modulate the data, and the received data are multiplied with the Barker code to demodulate them. Theproposed modulator and demodulator are implemented in 0.18μm CMOS technology. The simulation results showthat 1 bit is spread to 11 bits by the modulator and 11-bit received data are demodulated to 1 bit correctly. Theproposed design is simple, resistant to multipath fading and interference and offers the highest distance with thelowest BER for an RFID tag.

  4. Hybrid Electro-Optically Modulated Microcombs

    CERN Document Server

    Del'Haye, Pascal; Diddams, Scott A

    2012-01-01

    Optical frequency combs based on mode-locked lasers have proven to be invaluable tools for a wide range of applications in precision spectroscopy and metrology. A novel principle of optical frequency comb generation in whispering-gallery mode microresonators ("microcombs") has been developed recently, which represents a promising route towards chip-level integration and out-of-the-lab use of these devices. Presently, two families of microcombs have been demonstrated: combs with electronically detectable mode spacing that can be directly stabilized, and broadband combs with up to octave-spanning spectra but mode spacings beyond electronic detection limits. However, it has not yet been possible to achieve these two key requirements simultaneously, as will be critical for most microcomb applications. Here we present a key step to overcome this problem by interleaving an electro-optic comb with the spectrum from a parametric microcomb. This allows, for the first time, direct control and stabilization of a microco...

  5. Hybrid microelectronic technology

    Science.gov (United States)

    Moran, P.

    Various areas of hybrid microelectronic technology are discussed. The topics addressed include: basic thick film processing, thick film pastes and substrates, add-on components and attachment methods, thin film processing, and design of thick film hybrid circuits. Also considered are: packaging hybrid circuits, automating the production of hybrid circuits, application of hybrid techniques, customer's view of hybrid technology, and quality control and assurance in hybrid circuit production.

  6. -Regular Modules

    Directory of Open Access Journals (Sweden)

    Areej M. Abduldaim

    2013-01-01

    Full Text Available We introduced and studied -regular modules as a generalization of -regular rings to modules as well as regular modules (in the sense of Fieldhouse. An -module is called -regular if for each and , there exist and a positive integer such that . The notion of -pure submodules was introduced to generalize pure submodules and proved that an -module is -regular if and only if every submodule of is -pure iff   is a -regular -module for each maximal ideal of . Many characterizations and properties of -regular modules were given. An -module is -regular iff is a -regular ring for each iff is a -regular ring for finitely generated module . If is a -regular module, then .

  7. Constant envelope modulation based on interplex in LEO satellite communication system%基于互复用技术的低轨通信卫星恒包络调制

    Institute of Scientific and Technical Information of China (English)

    陈毅君; 漆庄平; 姜泉江; 梁旭文

    2013-01-01

    In case of LEO satellite spread spectrum communication system, the number of signals is variable on the same channel. Interplex will be studied in this paper. Based on the above study, the relationship of modulation efficiency, PAPR and power ratio are obtained. The appropriate choice of power radio is obtained in case of three signals or four signals multiplexing. The study of this paper has an important guiding significance for constant envelope combined methodologies in LEO satellite spread spectrum communication system.%针对低轨卫星扩频通信系统,在下行同一信道中信号路数可变情况下,采用Interplex互复用技术进行恒包络调制研究.以3,4路信号互复用调制为例,得到调制效率、峰均比与功率比之间的关系,给出功率分配合适的选择范围.这对低轨卫星扩频通信系统中多路信号复用的恒包络调制应用有重要的指导意义.

  8. Hybrid Gear

    Science.gov (United States)

    Handschuh, Robert F. (Inventor); Roberts, Gary D. (Inventor)

    2016-01-01

    A hybrid gear consisting of metallic outer rim with gear teeth and metallic hub in combination with a composite lay up between the shaft interface (hub) and gear tooth rim is described. The composite lay-up lightens the gear member while having similar torque carrying capability and it attenuates the impact loading driven noise/vibration that is typical in gear systems. The gear has the same operational capability with respect to shaft speed, torque, and temperature as an all-metallic gear as used in aerospace gear design.

  9. Hybrid Qualifications

    DEFF Research Database (Denmark)

    has turned out as a major focus of European education and training policies and certainly is a crucial principle underlying the European Qualifications Framework (EQF). In this context, «hybrid qualifications» (HQ) may be seen as an interesting approach to tackle these challenges as they serve «two...... masters», i.e. by producing skills for the labour market and enabling individuals to progress more or less directly to higher education. The specific focus of this book is placed on conditions, structures and processes which help to combine VET with qualifications leading into higher education...

  10. Intuitionistic hybrid logic

    DEFF Research Database (Denmark)

    Braüner, Torben

    2011-01-01

    Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area.......Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area....

  11. Continuity Controlled Hybrid Automata

    OpenAIRE

    Bergstra, J. A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of hybrid automata as timed transition systems. We also relate the synchronized product operator on hybrid automata to the parallel composition operator of the process algebra. It turns out that the f...

  12. Hybridized tetraquarks

    Directory of Open Access Journals (Sweden)

    A. Esposito

    2016-07-01

    Full Text Available We propose a new interpretation of the neutral and charged X,Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules but rather a manifestation of the interplay between the two. While meson molecules need a negative or zero binding energy, its counterpart for h-tetraquarks is required to be positive. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs0π± channel by the D0 Collaboration and the negative result presented subsequently by the LHCb Collaboration are understood in this scheme, together with a considerable portion of available data on X,Z particles. Considerations on a state with the same quantum numbers as the X(5568 are also made.

  13. Hybridized Tetraquarks

    CERN Document Server

    Esposito, A.; Polosa, A.D.

    2016-01-01

    We propose a new interpretation of the neutral and charged X, Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules. The latter would require a negative or zero binding energy whose counterpart in h-tetraquarks is a positive quantity. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs pi+- channel by the D0 collaboration and the negative result presented subsequently by the LHCb collaboration are understood in this scheme, together with a considerable portion of available data on X, Z particles. Considerations on a state with the same quantum numbers as the X(5568) are also made.

  14. Electrically heated particulate filter regeneration methods and systems for hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI)

    2010-10-12

    A control system for controlling regeneration of a particulate filter for a hybrid vehicle is provided. The system generally includes a regeneration module that controls current to the particulate filter to initiate regeneration. An engine control module controls operation of an engine of the hybrid vehicle based on the control of the current to the particulate filter.

  15. Stable local oscillator module.

    Energy Technology Data Exchange (ETDEWEB)

    Brocato, Robert Wesley

    2007-11-01

    This report gives a description of the development of a Stable Local Oscillator (StaLO) multi-chip module (MCM). It is a follow-on report to SAND2006-6414, Stable Local Oscillator Microcircuit. The StaLO accepts a 100MHz input signal and produces output signals at 1.2, 3.3, and 3.6 GHz. The circuit is built as a multi-chip module (MCM), since it makes use of integrated circuit technologies in silicon and lithium niobate as well as discrete passive components. This report describes the development of an MCM-based version of the complete StaLO, fabricated on an alumina thick film hybrid substrate.

  16. Establishment of quality, reliability and design standards for low, medium, and high power microwave hybrid microcircuits

    Science.gov (United States)

    Robinson, E. A.

    1973-01-01

    Quality, reliability, and design standards for microwave hybrid microcircuits were established. The MSFC Standard 85M03926 for hybrid microcircuits was reviewed and modifications were generated for use with microwave hybrid microcircuits. The results for reliability tests of microwave thin film capacitors, transistors, and microwave circuits are presented. Twenty-two microwave receivers were tested for 13,500 unit hours. The result of 111,121 module burn-in and operating hours for an integrated solid state transceiver module is reported.

  17. Continuity Controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  18. Continuity controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2008-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  19. Multiple Signal Classification for Determining Direction of Arrival of Frequency Hopping Spread Spectrum Signals

    Science.gov (United States)

    2014-03-27

    Acronym Definition SNR signal to noise ratio SST signal subspace transformation SVD singular value decomposition xii MULTIPLE SIGNAL CLASSIFICATION FOR... SVD ) to elevate spectral resolution and decrease required computation time [17] . Simulation results show that MTM outperforms conventional energy...noise, how to determine the null space (noise subspace) of Rxx, how to accurately obtain the signal power spectra and prior knowledge of the source

  20. HOS AND GA BASED INTERFERENCE REJECTION IN DIRECT SEQUENCE SPREAD SPECTRUM COMMUNICATION SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    GongXiangyang; HuGuangrui

    2003-01-01

    A new Higher Order Statistics (OHS) and Genetic Algorithm (GA)-based inter-ference rejection filter is introduced.Compared with the adaptive filters based on second-order statistics and gradient algorithm,the HOS and GA-based filter can reject the interference more efficiently,is independent of uncorrelated Gaussian noise,tende to converge to the optimum solution and is much less sensitive to the choice of the step size parameter.Computer simulations show that the method can reject narrowband interference efficiently.

  1. HOS AND GA BASED INTERFERENCE REJECTION IN DIRECT SEQUENCE SPREAD SPECTRUM COMMUNICATION SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    Gong Xiangyang; Hu Guangrui; Li Taijie

    2003-01-01

    A new Higher Order Statistics (HOS) and Genetic Algorithm (GA)-based interference rejection filter is introduced. Compared with the adaptive filters based on second-order statistics and gradient algorithm, the HOS and GA-based filter can reject the interference more efficiently, is independent of uncorrelated Gaussian noise, tends to converge to the optimum solution and is much less sensitive to the choice of the step size parameter. Computer simulations show that the method can reject narrowband interference efficiently.

  2. AM-FM Interference Excision in Spread Spectrum Communications via Projection Filtering

    Directory of Open Access Journals (Sweden)

    Patrick J. Loughlin

    2001-01-01

    Full Text Available Recently, Amin et al. introduced a projection filtering method for excising constant amplitude FM jammers from DSSS communications, with minimal distortion to the PN sequence. In this paper, we show that this approach can be applied to AM-FM jammers as well, with a simple modification. Theoretical performance measures (correlator SNR of the AM-FM projection method are derived, and demonstrate that near ideal performance is achieved for unbiased estimates of the jammer parameters. Results showing the effects of estimation errors in the AM and FM of the jammer on SNR are also provided. In general, FM errors cause greater performance degradation than the same level of error in estimating the AM.

  3. CAPS satellite spread spectrum communication blind multi-user detecting system based on chaotic sequences

    Institute of Scientific and Technical Information of China (English)

    LEI LiHua; SHI HuLi; MA GuanYi

    2009-01-01

    Multiple Path Interference (MPI) and Multiple Access Interference (MAI) are Important factors that affect the performance of Chinese Area Positioning System (CAPS),These problems can be solved by using spreading sequences with ideal properties and multi-user detectors.Chaotic sequences based on Chebyshev map are studied and the satellite communication system model is set up to investigate the application of chaotic sequences for CAPS in this paper,Simulation results show that chaotic sequences have desirable correlation properties and it is easy to generate a large number of chaotic sequences with good security.It has great practical value to apply chaotic sequences to CAPS together with multi-user detecting technology and the system performance can be improved greatly.

  4. Suppression of Narrowband Interference in Pseudo-Noise Spread Spectrum Systems.

    Science.gov (United States)

    1981-02-01

    unconstrained least squares solution, namely, that the resulting prediction coefficients do not necessarily vield a minimum phase filter Am (z). In our case... PHASE FILTER BASED ON WELCH METHOD 0 0 Figure 3.25 Improvement Factor for 15-Tap Filter 0 C) 4o C- C) Lij C) C) C) 13.4 ZI C20.00 -15.00 -10.00 -5.00

  5. Receiver Optimization and Error Rates for Pseudo-Noise Spread Spectrum Systems with Narrowband Interference Suppression.

    Science.gov (United States)

    1982-02-01

    improvement vs. Eb/No. B.3. SNR improvement for linear phase filter based on the Welch method. Vii I. Introduction Adaptive interference estimation and...consider the linear phase filter case. For con- venience, we allow the linear phase filter to have an acausal impulse response. The linear phase...the receiver with a linear phase filter (whitening filter followed by its matched filter), and linear phase filter based on the Welch method. Given (A

  6. Insertion, Detection, and Extraction of Messages Hidden by Optimal Multi-Signature Spread Spectrum Means

    Science.gov (United States)

    2015-07-09

    1VB−1, (12) where B, U, C and V all denote matrices of appropriate size. Then, we begin a tedious -yet all important- algebraic derivation of the SINR...McGraw-Hill, 2000. [34] C. D. Meyer, Matrix Analysis and Applied Linear Algebra . Philadelphia, PA: SIAM, 2000. [35] T. M. Cover and J. A. Thomas...satis- factory performance (not superior to M-IGLS, however). Of course, we may not expect that data are always embedded exclusively in low-amplitude

  7. Implementasi Teknik Watermarking menggunakan FFT dan Spread Spectrum Watermark pada Data Audio Digital

    Directory of Open Access Journals (Sweden)

    HANNAN HARAHAP

    2016-02-01

    Full Text Available ABSTRAK Penggunaan teknologi dan internet yang berkembang dengan pesat menyebabkan banyak pemalsuan dan penyebaran yang tidak sah terhadap data digital. Oleh karena itu, sangat diperlukan suatu teknologi yang dapat melindungi hak cipta data multimedia seperti audio. Teknik yang sering digunakan dalam perlindungan hak cipta adalah watermarking karena teknik ini memiliki tiga kriteria utama dalam keamanan data, yaitu robustness, imperceptibility, dan safety. Untuk itu, pada penelitian ini dirancang suatu skema yang dapat melindungi hak cipta data audio. Metode yang digunakan adalah Fast Fourier Transform, yang mengubah data audio asli ke dalam domain frekuensi sebelum dilakukan proses penyisipan watermark dan proses ekstraksi watermark. Watermark disebar pada komponen yang paling signifikan dari spektrum magnitude audio host. Teknik watermarking pada penelitian ini dapat menghasilkan Signal-to-Noise Ratio di atas 20 dB dan Bit Error Rate di bawah 5%. Kata kunci: Audio watermarking, Copyright Protection, Fast Fourier Transform, Spektrum magnitude ABSTRACT The use of technology and internet has grown rapidly that causes a lot of forgery and illegal proliferation of digital data. It needs a technology that can protect the copyright of multimedia data such as audio. The most common technique in copyright protection is watermarking because it has three main criteria in data security: robustness, imperceptibility, and safety. This research created a scheme that can protect a copyright of audio data. The method that we used is Fast Fourier Transform. This method changes the original audio data into frequency domain before the embedding and extraction process. The watermark is spread into the most significant component of the magnitude spectrum of audio host. This technique obtains Signal-to-Noise Ratio above 20 dB and Bit Error Rate below 5%. Keywords: Audio watermarking, Copyright Protection, Fast Fourier Transform, Magnitude spectrum

  8. CAPS satellite spread spectrum communication blind multi-user detecting system based on chaotic sequences

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Multiple Path Interference (MPI) and Multiple Access Interference (MAI) are important factors that affect the performance of Chinese Area Positioning System (CAPS). These problems can be solved by using spreading sequences with ideal properties and multi-user detectors. Chaotic sequences based on Chebyshev map are studied and the satellite communication system model is set up to investigate the application of chaotic sequences for CAPS in this paper. Simulation results show that chaotic sequences have desirable correlation properties and it is easy to generate a large number of chaotic sequences with good security. It has great practical value to apply chaotic sequences to CAPS together with multi-user detecting technology and the system performance can be improved greatly.

  9. Error correction coding for frequency-hopping multiple-access spread spectrum communication systems

    Science.gov (United States)

    Healy, T. J.

    1982-01-01

    A communication system which would effect channel coding for frequency-hopped multiple-access is described. It is shown that in theory coding can increase the spectrum utilization efficiency of a system with mutual interference to 100 percent. Various coding strategies are discussed and some initial comparisons are given. Some of the problems associated with implementing the type of system described here are discussed.

  10. Non-cooperative detection of weak spread-spectrum signals in AWGN

    CSIR Research Space (South Africa)

    Vlok, JD

    2012-11-01

    Full Text Available to be detected are assumed known. Theoretical analysis and a computer simulation study show that the performance of the new detection method is superior to classic energy detection (ED) in an additive white Gaussian noise (AWGN) channel....

  11. Robust Adaptive Spread-Spectrum Receivers: SMART Antenna/Space Timer Interference Mitigation Techniques

    Science.gov (United States)

    2004-09-01

    operator converges to the clipper . With respect to the linear lter post-processor w, we suggest as candidates and we investigate both the minimum-variance...vector b, the set of check sums -or syndrome - is the vector s = bHT . For a regular LDPC code, H has a constant column weight tc and a constant row...with corresponding syndrome vector s(k1) = b(k1)HT . The objective is to perturb b(k1) by one bit and create a new candidate bit vector b(k). To

  12. Resource Allocation and Interference Mitigation Techniques for Cooperative Multi-Antenna and Spread Spectrum Wireless Networks

    OpenAIRE

    Clarke, Patrick; Rodrigo C. de Lamare

    2013-01-01

    This chapter presents joint interference suppression and power allocation algorithms for DS-CDMA and MIMO networks with multiple hops and amplify-and-forward and decode-and-forward (DF) protocols. A scheme for joint allocation of power levels across the relays and linear interference suppression is proposed. We also consider another strategy for joint interference suppression and relay selection that maximizes the diversity available in the system. Simulations show that the proposed cross-lay...

  13. Simulated Assessment of Interference Effects in Direct Sequence Spread Spectrum (DSSS) QPSK Receiver

    Science.gov (United States)

    2014-03-27

    such as Wi-Fi, Bluetooth, and Zigbee . Special attention is focused on wireless sensor networks, cellular telephony, wireless tactical military...Proceedings of the Fourth ACM Conference on Wireless Network Security , New York, NY, USA, 2011, WiSec ’11, pp. 47–52, ACM. [18] Y. Bo, Sh. Gao-ping, and S...November 2010. [21] J. Guo H.Wang and Z. Wang, “Evaluation of Security for DSSS Under Repeater Jamming,” in IEEE International Conference on Communications

  14. An IIR median hybrid filter

    Science.gov (United States)

    Bauer, Peter H.; Sartori, Michael A.; Bryden, Timothy M.

    1992-01-01

    A new class of nonlinear filters, the so-called class of multidirectional infinite impulse response median hybrid filters, is presented and analyzed. The input signal is processed twice using a linear shift-invariant infinite impulse response filtering module: once with normal causality and a second time with inverted causality. The final output of the MIMH filter is the median of the two-directional outputs and the original input signal. Thus, the MIMH filter is a concatenation of linear filtering and nonlinear filtering (a median filtering module). Because of this unique scheme, the MIMH filter possesses many desirable properties which are both proven and analyzed (including impulse removal, step preservation, and noise suppression). A comparison to other existing median type filters is also provided.

  15. Quantum photonics hybrid integration platform

    CERN Document Server

    Murray, Eoin; Meany, Thomas; Flother, Frederick F; Lee, James P; Griffiths, Jonathan P; Jones, Geb A C; Farrer, Ian; Ritchie, David A; Bennet, Anthony J; Shields, Andrew J

    2015-01-01

    Fundamental to integrated photonic quantum computing is an on-chip method for routing and modulating quantum light emission. We demonstrate a hybrid integration platform consisting of arbitrarily designed waveguide circuits and single photon sources. InAs quantum dots (QD) embedded in GaAs are bonded to an SiON waveguide chip such that the QD emission is coupled to the waveguide mode. The waveguides are SiON core embedded in a SiO2 cladding. A tuneable Mach Zehnder modulates the emission between two output ports and can act as a path-encoded qubit preparation device. The single photon nature of the emission was veri?ed by an on-chip Hanbury Brown and Twiss measurement.

  16. Quantum photonics hybrid integration platform

    Energy Technology Data Exchange (ETDEWEB)

    Murray, E.; Floether, F. F. [Cambridge Research Laboratory, Toshiba Research Europe Limited, 208 Science Park, Milton Road, Cambridge CB4 0GZ (United Kingdom); Cavendish Laboratory, University of Cambridge, J.J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Ellis, D. J. P.; Meany, T.; Bennett, A. J., E-mail: anthony.bennet@crl.toshiba.co.uk; Shields, A. J. [Cambridge Research Laboratory, Toshiba Research Europe Limited, 208 Science Park, Milton Road, Cambridge CB4 0GZ (United Kingdom); Lee, J. P. [Cambridge Research Laboratory, Toshiba Research Europe Limited, 208 Science Park, Milton Road, Cambridge CB4 0GZ (United Kingdom); Engineering Department, University of Cambridge, 9 J. J. Thomson Avenue, Cambridge CB3 0FA (United Kingdom); Griffiths, J. P.; Jones, G. A. C.; Farrer, I.; Ritchie, D. A. [Cavendish Laboratory, University of Cambridge, J.J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2015-10-26

    Fundamental to integrated photonic quantum computing is an on-chip method for routing and modulating quantum light emission. We demonstrate a hybrid integration platform consisting of arbitrarily designed waveguide circuits and single-photon sources. InAs quantum dots (QD) embedded in GaAs are bonded to a SiON waveguide chip such that the QD emission is coupled to the waveguide mode. The waveguides are SiON core embedded in a SiO{sub 2} cladding. A tuneable Mach Zehnder interferometer (MZI) modulates the emission between two output ports and can act as a path-encoded qubit preparation device. The single-photon nature of the emission was verified using the on-chip MZI as a beamsplitter in a Hanbury Brown and Twiss measurement.

  17. Enriched MU-Calculi Module Checking

    CERN Document Server

    Ferrante, Alessandro; Parente, Mimmo

    2008-01-01

    The model checking problem for open systems has been intensively studied in the literature, for both finite-state (module checking) and infinite-state (pushdown module checking) systems, with respect to Ctl and Ctl*. In this paper, we further investigate this problem with respect to the Mu-calculus enriched with nominals and graded modalities (hybrid graded Mu-calculus), in both the finite-state and infinite-state settings. Using an automata-theoretic approach, we show that hybrid graded Mu-calculus module checking is solvable in exponential time, while hybrid graded Mu-calculus pushdown module checking is solvable in double-exponential time. These results are also tight since they match the known lower bounds for Ctl. We also investigate the module checking problem with respect to the hybrid graded Mu-calculus enriched with inverse programs (Fully enriched Mu-calculus): by showing a reduction from the domino problem, we show its undecidability. We conclude with a short overview of the model checking problem ...

  18. Electroactive functional hybrid layered nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Destri, Giovanni Li; Torrisi, Vanna; Marletta, Giovanni [Laboratory for Molecular Surfaces and Nanotechnology (LAMSUN) - University of Catania and CSGI - Catania (Italy)

    2012-07-11

    Two methodologies to build new nanostructured hybrid layered nanocomposites are presented. The first one involves the preparation of hybrid metal/polymer nanolayers (NLs) by combining two monolayer preparation techniques: Horizontal Precipitation Langmuir Blodgett method (HP-ML), for copolymer monolayers and sputter deposition technique, for Au NLs deposition. The second methodology is aimed to prepare regular arrays of nanopores, with diameter ranging between 40-100 nm, in ultra-thin films of electroactive polymers, to obtain embedded regular arrays of nanopores filled by a further electroactive organic component. The produced hybrid MLs have been characterized by means of X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and Grazing Incidence X-ray Diffraction (GI-XRD). In the first case, current-voltage (I-V) measurements demonstrate that the multilayers exhibit a bipolar conduction behaviour (electrons and holes carriers), with a peculiar transition in the nature of the majority carriers (from holes to electrons) above a threshold number of bilayers. In the second case, it is found that the degree of pore filling, as well as the polymer crystallinity can be easily modulated, prompting the tuning of the photoresponse of the nanocomposites.

  19. From hybrid swarms to swarms of hybrids

    Science.gov (United States)

    The introgression of modern humans (Homo sapiens) with Neanderthals 40,000 YBP after a half-million years of separation, may have led to the best example of a hybrid swarm on earth. Modern trade and transportation in support of the human hybrids has continued to introduce additional species, genotyp...

  20. The Hybrid Museum: Hybrid Economies of Meaning

    DEFF Research Database (Denmark)

    Vestergaard, Vitus

    2013-01-01

    this article shows that there are two different museum mindsets where the second mindset leans towards participatory practices. It is shown how a museum can support a hybrid economy of meaning that builds on both a user generated economy of meaning and an institutional economy of meaning and adds value to both....... Such a museum is referred to as a hybrid museum....

  1. Hydraulic Hybrid Vehicles

    Science.gov (United States)

    EPA and the United Parcel Service (UPS) have developed a hydraulic hybrid delivery vehicle to explore and demonstrate the environmental benefits of the hydraulic hybrid for urban pick-up and delivery fleets.

  2. Hybrid Management in Hospitals

    DEFF Research Database (Denmark)

    Byrkjeflot, Haldor; Jespersen, Peter Kragh

    2010-01-01

    Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer......Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer...

  3. Resin Catalyst Hybrids

    Institute of Scientific and Technical Information of China (English)

    S. Asaoka

    2005-01-01

    @@ 1Introduction: What are resin catalyst hybrids? There are typically two types of resin catalyst. One is acidic resin which representative is polystyrene sulfonic acid. The other is basic resin which is availed as metal complex support. The objective items of this study on resin catalyst are consisting of pellet hybrid, equilibrium hybrid and function hybrid of acid and base,as shown in Fig. 1[1-5].

  4. Mesoscale hybrid calibration artifact

    Science.gov (United States)

    Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  5. Realizing the Hybrid Library.

    Science.gov (United States)

    Pinfield, Stephen; Eaton, Jonathan; Edwards, Catherine; Russell, Rosemary; Wissenburg, Astrid; Wynne, Peter

    1998-01-01

    Outlines five projects currently funded by the United Kingdom's Electronic Libraries Program (eLib): HyLiFe (Hybrid Library of the Future), MALIBU (MAnaging the hybrid Library for the Benefit of Users), HeadLine (Hybrid Electronic Access and Delivery in the Library Networked Environment), ATHENS (authentication scheme), and BUILDER (Birmingham…

  6. Homoploid hybrid expectations

    Science.gov (United States)

    Homoploid hybrid speciation occurs when a stable, fertile, and reproductively isolated lineage results from hybridization between two distinct species without a change in ploidy level. Reproductive isolation between a homoploid hybrid species and its parents is generally attained via chromosomal re...

  7. Hybrid armature projectile

    Science.gov (United States)

    Hawke, Ronald S.; Asay, James R.; Hall, Clint A.; Konrad, Carl H.; Sauve, Gerald L.; Shahinpoor, Mohsen; Susoeff, Allan R.

    1993-01-01

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasama blowby.

  8. Intraply Hybrid Composite Design

    Science.gov (United States)

    Chamis, C. C.; Sinclair, J. H.

    1986-01-01

    Several theoretical approaches combined in program. Intraply hybrid composites investigated theoretically and experimentally at Lewis Research Center. Theories developed during investigations and corroborated by attendant experiments used to develop computer program identified as INHYD (Intraply Hybrid Composite Design). INHYD includes several composites micromechanics theories, intraply hybrid composite theories, and integrated hygrothermomechanical theory. Equations from theories used by program as appropriate for user's specific applications.

  9. Hybrid quantum information processing

    Energy Technology Data Exchange (ETDEWEB)

    Furusawa, Akira [Department of Applied Physics, School of Engineering, The University of Tokyo (Japan)

    2014-12-04

    I will briefly explain the definition and advantage of hybrid quantum information processing, which is hybridization of qubit and continuous-variable technologies. The final goal would be realization of universal gate sets both for qubit and continuous-variable quantum information processing with the hybrid technologies. For that purpose, qubit teleportation with a continuousvariable teleporter is one of the most important ingredients.

  10. Optical modulators with 2D layered materials

    Science.gov (United States)

    Sun, Zhipei; Martinez, Amos; Wang, Feng

    2016-04-01

    Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that 2D layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this Review, we cover the state of the art of optical modulators based on 2D materials, including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as 2D heterostructures, plasmonic structures, and silicon and fibre integrated structures. We also take a look at the future perspectives and discuss the potential of yet relatively unexplored mechanisms, such as magneto-optic and acousto-optic modulation.

  11. The hydrogen hybrid option

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.R.

    1993-10-15

    The energy efficiency of various piston engine options for series hybrid automobiles are compared with conventional, battery powered electric, and proton exchange membrane (PEM) fuel cell hybrid automobiles. Gasoline, compressed natural gas (CNG), and hydrogen are considered for these hybrids. The engine and fuel comparisons are done on a basis of equal vehicle weight, drag, and rolling resistance. The relative emissions of these various fueled vehicle options are also presented. It is concluded that a highly optimized, hydrogen fueled, piston engine, series electric hybrid automobile will have efficiency comparable to a similar fuel cell hybrid automobile and will have fewer total emissions than the battery powered vehicle, even without a catalyst.

  12. Testing of the front-end hybrid circuits for the CMS Tracker upgrade

    Science.gov (United States)

    Gadek, T.; Blanchot, G.; Honma, A.; Kovacs, M.; Raymond, M.; Rose, P.

    2017-01-01

    The upgrade of the CMS Tracker for the HL-LHC requires the design of new double-sensor, silicon detector modules, which implement Level 1 trigger functionality in the increased luminosity environment. These new modules will contain two different, high-density front-end hybrid circuits, equipped with flip-chip ASICs, auxiliary electronic components and mechanical structures. The hybrids require qualification tests before they are assembled into modules. Test methods are proposed together with the corresponding test hardware and software. They include functional tests and signal injection in a cold environment to find possible failure modes of the hybrids under real operating conditions.

  13. Testing of the Front-End Hybrid Circuits for the CMS Tracker Upgrade

    CERN Document Server

    Gadek, Tomasz; Honma, Alan; Kovacs, Mark Istvan; Raymond, David Mark; Rose, Pierre

    2016-01-01

    The upgrade of the CMS tracker for the HL-LHC requires the design of new double-sensor, silicon detector modules, which implement Level 1 trigger functionality in the increased luminosity environment. These new modules will contain two different, high density front-end hybrid circuits, equipped with flip-chip ASICs, auxiliary electronic components and mechanical structures. The hybrids require qualification tests before they are assembled into modules. Test methods are proposed together with the corresponding test hardware and software. They include functional tests and signal injection in a cold environment to find possible failure modes of the hybrids under real operating conditions.

  14. Hybrid optical antennas with photonic resistors.

    Science.gov (United States)

    Butakov, N A; Schuller, J A

    2015-11-16

    Hybrid optical antennas, comprising active materials placed in the gaps of plasmonic split-ring-resonators and nano-dimers, have been the subject of numerous recent investigations. Engineered coupling between the two plasmonic resonators is achieved by modulating the active material, enabling control over the near- and far-field electromagnetic properties. Here, using electromagnetics calculations, we study the evolving optical response of a hybrid metal-semiconductor-metal nanorod antenna as the semiconductor free charge carrier density is continuously varied. In particular, we demonstrate qualitatively new behavior arising from epsilon-near-zero properties in intermediately doped semiconductors. In agreement with optical nano-circuit theory, we show that in the epsilon-near-zero regime such a load acts as an ideal optical resistor with an optimized damping response and strongly suppressed electromagnetic scattering. In periodic arrays, or metasurfaces, we then show how to use these effects to construct high-efficiency nanophotonic intensity modulators for dynamically shaping light.

  15. Sustainable process design & analysis of hybrid separations

    DEFF Research Database (Denmark)

    Kumar Tula, Anjan; Befort, Bridgette; Garg, Nipun

    2016-01-01

    Distillation is an energy intensive operation in chemical process industries. There are around 40,000 distillation columns in operation in the US, requiring approximately 40% of the total energy consumption in US chemical process industries. However, analysis of separations by distillation has...... shown that more than 50% of energy is spent in purifying the last 5-10% of the distillate product. Membrane modules on the other hand can achieve high purity separations at lower energy costs, but if the flux is high, it requires large membrane area. A hybrid scheme where distillation and membrane...... modules are combined such that each operates at its highest efficiency, has the potential for significant energy reduction without significant increase of capital costs. This paper presents a method for sustainable design of hybrid distillation-membrane schemes with guaranteed reduction of energy...

  16. Hybridization and extinction.

    Science.gov (United States)

    Todesco, Marco; Pascual, Mariana A; Owens, Gregory L; Ostevik, Katherine L; Moyers, Brook T; Hübner, Sariel; Heredia, Sylvia M; Hahn, Min A; Caseys, Celine; Bock, Dan G; Rieseberg, Loren H

    2016-08-01

    Hybridization may drive rare taxa to extinction through genetic swamping, where the rare form is replaced by hybrids, or by demographic swamping, where population growth rates are reduced due to the wasteful production of maladaptive hybrids. Conversely, hybridization may rescue the viability of small, inbred populations. Understanding the factors that contribute to destructive versus constructive outcomes of hybridization is key to managing conservation concerns. Here, we survey the literature for studies of hybridization and extinction to identify the ecological, evolutionary, and genetic factors that critically affect extinction risk through hybridization. We find that while extinction risk is highly situation dependent, genetic swamping is much more frequent than demographic swamping. In addition, human involvement is associated with increased risk and high reproductive isolation with reduced risk. Although climate change is predicted to increase the risk of hybridization-induced extinction, we find little empirical support for this prediction. Similarly, theoretical and experimental studies imply that genetic rescue through hybridization may be equally or more probable than demographic swamping, but our literature survey failed to support this claim. We conclude that halting the introduction of hybridization-prone exotics and restoring mature and diverse habitats that are resistant to hybrid establishment should be management priorities.

  17. Spoof Plasmon Hybridization

    CERN Document Server

    Zhang, Jingjing; Luo, Yu; Shen, Xiaopeng; Maier, Stefan A; Cui, Tie Jun

    2016-01-01

    Plasmon hybridization between closely spaced nanoparticles yields new hybrid modes not found in individual constituents, allowing for the engineering of resonance properties and field enhancement capabilities of metallic nanostructure. Experimental verifications of plasmon hybridization have been thus far mostly limited to optical frequencies, as metals cannot support surface plasmons at longer wavelengths. Here, we introduce the concept of 'spoof plasmon hybridization' in highly conductive metal structures and investigate experimentally the interaction of localized surface plasmon resonances (LSPR) in adjacent metal disks corrugated with subwavelength spiral patterns. We show that the hybridization results in the splitting of spoof plasmon modes into bonding and antibonding resonances analogous to molecular orbital rule and plasmonic hybridization in optical spectrum. These hybrid modes can be manipulated to produce enormous field enhancements (larger than 5000) by tuning the separation between disks or alte...

  18. Marine Fish Hybridization

    KAUST Repository

    He, Song

    2017-04-01

    Natural hybridization is reproduction (without artificial influence) between two or more species/populations which are distinguishable from each other by heritable characters. Natural hybridizations among marine fishes were highly underappreciated due to limited research effort; it seems that this phenomenon occurs more often than is commonly recognized. As hybridization plays an important role in biodiversity processes in the marine environment, detecting hybridization events and investigating hybridization is important to understand and protect biodiversity. The first chapter sets the framework for this disseration study. The Cohesion Species Concept was selected as the working definition of a species for this study as it can handle marine fish hybridization events. The concept does not require restrictive species boundaries. A general history and background of natural hybridization in marine fishes is reviewed during in chapter as well. Four marine fish hybridization cases were examed and documented in Chapters 2 to 5. In each case study, at least one diagnostic nuclear marker, screened from among ~14 candidate markers, was found to discriminate the putative hybridizing parent species. To further investigate genetic evidence to support the hybrid status for each hybrid offspring in each case, haploweb analysis on diagnostic markers (nuclear and/or mitochondrial) and the DAPC/PCA analysis on microsatellite data were used. By combining the genetic evidences, morphological traits, and ecological observations together, the potential reasons that triggered each hybridization events and the potential genetic/ecology effects could be discussed. In the last chapter, sequences from 82 pairs of hybridizing parents species (for which COI barcoding sequences were available either on GenBank or in our lab) were collected. By comparing the COI fragment p-distance between each hybridizing parent species, some general questions about marine fish hybridization were discussed: Is

  19. Irreducible Specht modules are signed Young modules

    OpenAIRE

    Hemmer, David J.

    2005-01-01

    Recently Donkin defined signed Young modules as a simultaneous generalization of Young and twisted Young modules for the symmetric group. We show that in odd characteristic, if a Specht module $S^\\lambda$ is irreducible, then $S^\\lambda$ is a signed Young module. Thus the set of irreducible Specht modules coincides with the set of irreducible signed Young modules. This provides evidence for our conjecture that the signed Young modules are precisely the class of indecomposable self-dual module...

  20. Proceedings of the ECOM Hybrid Microcircuit Symposium, 1976

    Science.gov (United States)

    1976-06-01

    For Low Cost Avionics W. W. Staley , Westinghouse Electric Corporation 372 SDI Modules J. Fishel, Circuit Technology Inc. 385 Hybrid Thick Film...or Gerber plotters. i Drawings, when required, are usually generated from the circuit layout. They may be used as assembly aids or inspection guides...TCVCXO-I (left) and TCVCXO-II. <A <•SA 4 . .4’.374 SEM/HYBRIDS, PARTN1.RS FOR LOW COST AVIONICS W. W. Staley Systems Development Division

  1. Asymptotic Expansions of Transition Densities for Hybrid Jump-Diffusions

    Institute of Scientific and Technical Information of China (English)

    Yuan-jin Liu; G.Yin

    2004-01-01

    A class of hybrid jump diffusions modulated by a Markov chain is considered in this work.The motivation stems from insurance risk models,and emerging applications in production planning and wireless communications.The models are hybrid in that they involve both continuous dynamics and discrete events.Under suitable conditions,asymptotic expansions of the transition densities for the underlying processes are developed.The formal expansions are validated and the error bounds obtained.

  2. Distributed Heterogeneous Simulation of a Hybrid-Electric Vehicle

    Science.gov (United States)

    2006-03-29

    operate as a generator to convert mechanical energy from the diesel t~nginc 01 from regenerative braking to electrical energy. A vehicle control module...Distributed Heterogeneous Simulation of a Hybrid- Electric Vehicle Ning Wu’, Curtis Rands t , Charles E. Lucas!, Eric A. Walters§, and Maher A...Masrurit US Army RDECOM-TARDEC, Warren, MI, 48397 Hybrid- electric military vehicles provide many advantages over conventional military vehicles powered

  3. Coherent hybrid electromagnetic field imaging

    Science.gov (United States)

    Cooke, Bradly J.; Guenther, David C.

    2008-08-26

    An apparatus and corresponding method for coherent hybrid electromagnetic field imaging of a target, where an energy source is used to generate a propagating electromagnetic beam, an electromagnetic beam splitting means to split the beam into two or more coherently matched beams of about equal amplitude, and where the spatial and temporal self-coherence between each two or more coherently matched beams is preserved. Two or more differential modulation means are employed to modulate each two or more coherently matched beams with a time-varying polarization, frequency, phase, and amplitude signal. An electromagnetic beam combining means is used to coherently combine said two or more coherently matched beams into a coherent electromagnetic beam. One or more electromagnetic beam controlling means are used for collimating, guiding, or focusing the coherent electromagnetic beam. One or more apertures are used for transmitting and receiving the coherent electromagnetic beam to and from the target. A receiver is used that is capable of square-law detection of the coherent electromagnetic beam. A waveform generator is used that is capable of generation and control of time-varying polarization, frequency, phase, or amplitude modulation waveforms and sequences. A means of synchronizing time varying waveform is used between the energy source and the receiver. Finally, a means of displaying the images created by the interaction of the coherent electromagnetic beam with target is employed.

  4. Stabilization of concentration fluctuations in mixed membranes by hybrid lipids

    Science.gov (United States)

    Palmieri, Benoit; Safran, Samuel

    2012-02-01

    Finite-size domains have been observed at the surface of cells. These lipids ``rafts'' are stable nanodomains enriched in saturated lipids and cholesterol. While line tension favors macrodomains, one explanation for raft stabilization suggests that the membrane composition is tuned close to a spinodal temperature. From this point of view, rafts are long-lived concentration fluctuations in the mixed phase. We propose a ternary mixture model for the cell membrane that includes hybrid lipids which have one saturated and one unsaturated hydrocarbon chain. Finite amount of hybrid lipids reduces the packing incompatibility at the saturated/unsaturated lipid interface and stabilizes the concentration fluctuations. Hybrid-Hybrid interactions are included in the model and further increase the life-time of the rafts and decrease their length-scales. Moreover, the hybrid has extra orientational degrees of freedom that may lead to modulated phases.

  5. Mixed protonic and electronic conductors hybrid oxide synaptic transistors

    Science.gov (United States)

    Fu, Yang Ming; Zhu, Li Qiang; Wen, Juan; Xiao, Hui; Liu, Rui

    2017-05-01

    Mixed ionic and electronic conductor hybrid devices have attracted widespread attention in the field of brain-inspired neuromorphic systems. Here, mixed protonic and electronic conductor (MPEC) hybrid indium-tungsten-oxide (IWO) synaptic transistors gated by nanogranular phosphorosilicate glass (PSG) based electrolytes were obtained. Unique field-configurable proton self-modulation behaviors were observed on the MPEC hybrid transistor with extremely strong interfacial electric-double-layer effects. Temporally coupled synaptic plasticities were demonstrated on the MPEC hybrid IWO synaptic transistor, including depolarization/hyperpolarization, synaptic facilitation and depression, facilitation-stead/depression-stead behaviors, spiking rate dependent plasticity, and high-pass/low-pass synaptic filtering behaviors. MPEC hybrid synaptic transistors may find potential applications in neuron-inspired platforms.

  6. Time Series Prediction based on Hybrid Neural Networks

    Directory of Open Access Journals (Sweden)

    S. A. Yarushev

    2016-01-01

    Full Text Available In this paper, we suggest to use hybrid approach to time series forecasting problem. In first part of paper, we create a literature review of time series forecasting methods based on hybrid neural networks and neuro-fuzzy approaches. Hybrid neural networks especially effective for specific types of applications such as forecasting or classification problem, in contrast to traditional monolithic neural networks. These classes of problems include problems with different characteristics in different modules. The main part of paper create a detailed overview of hybrid networks benefits, its architectures and performance under traditional neural networks. Hybrid neural networks models for time series forecasting are discussed in the paper. Experiments with modular neural networks are given.

  7. *-Modules, co-*-modules and cotilting modules over Noetherian rings

    Institute of Scientific and Technical Information of China (English)

    汪明义; 许永华

    1996-01-01

    Let R be a Noetherian ring. The projectivity and injectivity of modules over R are discussed. The concept of modules is introduced and the descriptions for co-*-modules over R are given. At last, cotilting modules over R are characterized by means of co-*-modules.

  8. Hybrid lidar radar receiver for underwater imaging applications

    Science.gov (United States)

    Seetamraju, Madhavi; Gurjar, Rajan; Squillante, Michael; Derderian, Jeffrey P.

    2009-05-01

    In this work, we present research performed to improve the receiver characteristics for underwater imaging applications using the hybrid lidar-radar detection technique. We report the development of the next-generation coherent heterodyne receiver using modulation of the optical receiver's amplifier gain. Significant advantages in the receiver specifications are achieved using a large-area, high gain, low-noise silicon avalanche photodiode (APD) as the photodetector cum frequency mixer-demodulator. We demonstrate that heterodyne detection by gain modulation of APD can be used to increase the signal-to-noise ratio, detection sensitivity and bandwidth for the hybrid receiver system.

  9. Thruster Module

    Science.gov (United States)

    Andersson, G.

    2015-09-01

    The thruster module described in this paper provides a low but controlled acceleration in a mission which would normally be labelled “microgravity”. The first mission was Cryofenix, where tanks containing liquid hydrogen were used in the experiment. The experiment utilizing the low acceleration is using liquids and requires a precise acceleration profile throughout the mission. Acceleration obtained by payload rotation is not feasible due to that the transversal forces required to change the acceleration will cause undesired liquid turbulence. In order to satisfy the experiment requirements a thruster module was developed by SSC for the Cryofenix mission funded by CNES. The Cryofenix mission had a payload weight of 380 kg and an apogee of about 260 km. The module produces a controlled thrust in flight direction by means of a cold gas system.

  10. Vaccine engineering improved by hybrid technology.

    Science.gov (United States)

    Linhart, Birgit; Valenta, Rudolf

    2004-08-01

    The term 'vaccination' describes the induction of protective immune responses against infectious diseases, but is also used to define antigen-specific forms of immunotherapy for allergy, cancer and autoimmunity. Successful vaccination requires either immune modulation or the induction of robust specific immunity to several disease-causing antigens. However, natural antigen sources may contain greatly varying amounts of these antigens and some of them may exhibit low immunogenicity. An approach for overcoming the latter problems has been developed for allergy vaccines recently. This approach is based on the genetic engineering of hybrid molecules, consisting of several major disease-eliciting antigens/epitopes. Such hybrid molecules can be built to include the most relevant epitopes of complex antigen sources. Moreover, fusion of different antigens in the form of hybrid molecules strongly increases their immunogenicity. The hybrid approach can also be used for the generation of mosaic antigens with altered immunological properties, which consist of re-shuffled antigen pieces. We exemplify the use of hybrid technology for the generation of new allergy vaccines and discuss its potential applicability for the development of vaccines for infectious diseases, cancer and autoimmunity.

  11. Henkin and Hybrid Logic

    DEFF Research Database (Denmark)

    Blackburn, Patrick Rowan; Huertas, Antonia; Manzano, Maria;

    2014-01-01

    Leon Henkin was not a modal logician, but there is a branch of modal logic that has been deeply influenced by his work. That branch is hybrid logic, a family of logics that extend orthodox modal logic with special proposition symbols (called nominals) that name worlds. This paper explains why...... Henkin’s techniques are so important in hybrid logic. We do so by proving a completeness result for a hybrid type theory called HTT, probably the strongest hybrid logic that has yet been explored. Our completeness result builds on earlier work with a system called BHTT, or basic hybrid type theory...... is due to the first-order perspective, which lies at the heart of Henin’s best known work and hybrid logic....

  12. Hybrid uncertainty-based design optimization and its application to hybrid rocket motors for manned lunar landing

    Directory of Open Access Journals (Sweden)

    Hao Zhu

    2017-04-01

    Full Text Available Design reliability and robustness are getting increasingly important for the general design of aerospace systems with many inherently uncertain design parameters. This paper presents a hybrid uncertainty-based design optimization (UDO method developed from probability theory and interval theory. Most of the uncertain design parameters which have sufficient information or experimental data are classified as random variables using probability theory, while the others are defined as interval variables with interval theory. Then a hybrid uncertainty analysis method based on Monte Carlo simulation and Taylor series interval analysis is developed to obtain the uncertainty propagation from the design parameters to system responses. Three design optimization strategies, including deterministic design optimization (DDO, probabilistic UDO and hybrid UDO, are applied to the conceptual design of a hybrid rocket motor (HRM used as the ascent propulsion system in Apollo lunar module. By comparison, the hybrid UDO is a feasible method and can be effectively applied to the general design of aerospace systems.

  13. BSA Hybrid Synthesized Polymer

    Institute of Scientific and Technical Information of China (English)

    Zong Bin LIU; Xiao Pei DENG; Chang Sheng ZHAO

    2006-01-01

    Bovine serum albumin (BSA), a naturally occurring biopolymer, was regarded as a polymeric material to graft to an acrylic acid (AA)-N-vinyl pyrrolidone (NVP) copolymer to form a biomacromolecular hybrid polymer. The hybrid polymer can be blended with polyethersulfone (PES) to increase the hydrophilicity of the PES membrane, which suggested that the hybrid polymer might have a wide application in the modification of biomaterials.

  14. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Ronkko, Mauno; Ravn, Anders P.

    1997-01-01

    a differential action, which allows differential equations as primitive actions. The extension allows us to model hybrid systems with both continuous and discrete behaviour. The main result of this paper is an extension of such a hybrid action system with parallel composition. The extension does not change...... the original meaning of the parallel composition, and therefore also the ordinary action systems can be composed in parallel with the hybrid action systems....

  15. HYBRID VEHICLE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-06-01

    Full Text Available The hybrid vehicle control system includes a start–stop system for an internal combustion engine. The system works in a hybrid mode and normal vehicle operation. To simplify the start–stop system, there were user new possibilities of a hybrid car, which appeared after the conversion. Results of the circuit design of the proposed system of basic blocks are analyzed.

  16. Nanoscale Organic Hybrid Electrolytes

    KAUST Repository

    Nugent, Jennifer L.

    2010-08-20

    Nanoscale organic hybrid electrolytes are composed of organic-inorganic hybrid nanostructures, each with a metal oxide or metallic nanoparticle core densely grafted with an ion-conducting polyethylene glycol corona - doped with lithium salt. These materials form novel solvent-free hybrid electrolytes that are particle-rich, soft glasses at room temperature; yet manifest high ionic conductivity and good electrochemical stability above 5V. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Hybrid radiator cooling system

    Science.gov (United States)

    France, David M.; Smith, David S.; Yu, Wenhua; Routbort, Jules L.

    2016-03-15

    A method and hybrid radiator-cooling apparatus for implementing enhanced radiator-cooling are provided. The hybrid radiator-cooling apparatus includes an air-side finned surface for air cooling; an elongated vertically extending surface extending outwardly from the air-side finned surface on a downstream air-side of the hybrid radiator; and a water supply for selectively providing evaporative cooling with water flow by gravity on the elongated vertically extending surface.

  18. Signed Young Modules and Simple Specht Modules

    OpenAIRE

    Danz, Susanne; Lim, Kay Jin

    2015-01-01

    By a result of Hemmer, every simple Specht module of a finite symmetric group over a field of odd characteristic is a signed Young module. While Specht modules are parametrized by partitions, indecomposable signed Young modules are parametrized by certain pairs of partitions. The main result of this article establishes the signed Young module labels of simple Specht modules. Along the way we prove a number of results concerning indecomposable signed Young modules that are of independent inter...

  19. Hybrid Unifying Variable Supernetwork Model

    Institute of Scientific and Technical Information of China (English)

    LIU; Qiang; FANG; Jin-qing; LI; Yong

    2015-01-01

    In order to compare new phenomenon of topology change,evolution,hybrid ratio and network characteristics of unified hybrid network theoretical model with unified hybrid supernetwork model,this paper constructed unified hybrid variable supernetwork model(HUVSM).The first layer introduces a hybrid ratio dr,the

  20. Large Unifying Hybrid Supernetwork Model

    Institute of Scientific and Technical Information of China (English)

    LIU; Qiang; FANG; Jin-qing; LI; Yong

    2015-01-01

    For depicting multi-hybrid process,large unifying hybrid network model(so called LUHNM)has two sub-hybrid ratios except dr.They are deterministic hybrid ratio(so called fd)and random hybrid ratio(so called gr),respectively.

  1. Hybrid Rocket Technology

    National Research Council Canada - National Science Library

    Sankaran Venugopal; K K Rajesh; V Ramanujachari

    2011-01-01

    With their unique operational characteristics, hybrid rockets can potentially provide safer, lower-cost avenues for spacecraft and missiles than the current solid propellant and liquid propellant systems...

  2. Hybrid FOSS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Armstrong researchers are continuing their efforts to further develop FOSS technologies. A hybrid FOSS technique (HyFOSS) employs conventional continuous grating...

  3. Vacuum studies with a VELO module

    CERN Document Server

    Bates, A; Parkes, C; Saavedra, A

    2007-01-01

    LHCb VELO modules will be operated in low vacuum with voltages as high as 500~V on both hybrids of the module. This note provides the first study on the breakdown voltages of a pre-production VELO module with varying pressures and venting with air. The breakdown voltages are measured by studying the leakage currents of the sensors on the module and the measured breakdown curve is compared to the theoretical breakdown for a parallel plate capacitor. The effect of breakdown on the noise of the sensors is also studied. It is concluded that the modules should not be operated at voltages above 500~V over a pressure range of 0.1-760~Torr.

  4. Memory Modulation

    NARCIS (Netherlands)

    Roozendaal, Benno; McGaugh, James L.

    2011-01-01

    Our memories are not all created equally strong: Some experiences are well remembered while others are remembered poorly, if at all. Research on memory modulation investigates the neurobiological processes and systems that contribute to such differences in the strength of our memories. Extensive evi

  5. From hybrid swarms to swarms of hybrids

    Science.gov (United States)

    Stohlgren, Thomas J.; Szalanski, Allen L; Gaskin, John F.; Young, Nicholas E.; West, Amanda; Jarnevich, Catherine S.; Tripodi, Amber

    2015-01-01

    Science has shown that the introgression or hybridization of modern humans (Homo sapiens) with Neanderthals up to 40,000 YBP may have led to the swarm of modern humans on earth. However, there is little doubt that modern trade and transportation in support of the humans has continued to introduce additional species, genotypes, and hybrids to every country on the globe. We assessed the utility of species distributions modeling of genotypes to assess the risk of current and future invaders. We evaluated 93 locations of the genus Tamarix for which genetic data were available. Maxent models of habitat suitability showed that the hybrid, T. ramosissima x T. chinensis, was slightly greater than the parent taxa (AUCs > 0.83). General linear models of Africanized honey bees, a hybrid cross of Tanzanian Apis mellifera scutellata and a variety of European honey bee including A. m. ligustica, showed that the Africanized bees (AUC = 0.81) may be displacing European honey bees (AUC > 0.76) over large areas of the southwestern U.S. More important, Maxent modeling of sub-populations (A1 and A26 mitotypes based on mDNA) could be accurately modeled (AUC > 0.9), and they responded differently to environmental drivers. This suggests that rapid evolutionary change may be underway in the Africanized bees, allowing the bees to spread into new areas and extending their total range. Protecting native species and ecosystems may benefit from risk maps of harmful invasive species, hybrids, and genotypes.

  6. Studies on Novel Anti-jamming Technique of Unmanned Aerial Vehicle Data Link

    Institute of Scientific and Technical Information of China (English)

    Huang Wenzhun; Wang Yongsheng; Ye Xiangyang

    2008-01-01

    Based on the M-ary spread spectrum (M-ary-SS), direct sequence spread spectrum (DS-SS), and orthogonal frequency division multiplex (OFDM), a novel anti-jamming scheme, named orthogonal code time division multi-subchannels spread spectrum modulation (OC-TDMSCSSM), is proposed to enhance the anti-jamming ability of the unmanned aerial vehicle (UAV) data link. The anti-jamming system with its mathematical model is presented first, and then the signal formats of transmitter and receiver are derived. The receiver's bit error rate (BER) is demonstrated and anti-jamming performance analysis is carried out in an additive white Ganssian noise (AWGN) channel. Theoretical research and simulation results show the anti-jamming performance of the proposed scheme better than that of the hybrid direct sequence frequency hopping spread spectrum (DS/FH SS) system. The jamming margin of the OC-TDMSCSSM system is 5 dB higher than that of DS/FH SS system under the condition of lUcian channel and full-band jamming, and 6 dB higher under the condition of Rician channel environment and partial-band jamming.

  7. A Processing Technique for OFDM-Modulated Wideband Radar Signals

    NARCIS (Netherlands)

    Tigrek, R.F.

    2010-01-01

    The orthogonal frequency division multiplexing (OFDM) is a multicarrier spread-spectrum technique which finds wide-spread use in communications. The OFDM pulse compression method that utilizes an OFDM communication signal for radar tasks has been developed and reported in this dissertation. Using th

  8. Cardiac hybrid imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gaemperli, Oliver [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); University Hospital Zurich, Nuclear Cardiology, Cardiovascular Center, Zurich (Switzerland); Kaufmann, Philipp A. [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland)

    2014-05-15

    Hybrid cardiac single photon emission computed tomography (SPECT)/CT imaging allows combined assessment of anatomical and functional aspects of cardiac disease. In coronary artery disease (CAD), hybrid SPECT/CT imaging allows detection of coronary artery stenosis and myocardial perfusion abnormalities. The clinical value of hybrid imaging has been documented in several subsets of patients. In selected groups of patients, hybrid imaging improves the diagnostic accuracy to detect CAD compared to the single imaging techniques. Additionally, this approach facilitates functional interrogation of coronary stenoses and guidance with regard to revascularization procedures. Moreover, the anatomical information obtained from CT coronary angiography or coronary artery calcium scores (CACS) adds prognostic information over perfusion data from SPECT. The use of cardiac hybrid imaging has been favoured by the dissemination of dedicated hybrid systems and the release of dedicated image fusion software, which allow simple patient throughput for hybrid SPECT/CT studies. Further technological improvements such as more efficient detector technology to allow for low-radiation protocols, ultra-fast image acquisition and improved low-noise image reconstruction algorithms will be instrumental to further promote hybrid SPECT/CT in research and clinical practice. (orig.)

  9. Hybrid intelligent engineering systems

    CERN Document Server

    Jain, L C; Adelaide, Australia University of

    1997-01-01

    This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

  10. A Hybrid Imagination

    DEFF Research Database (Denmark)

    Jamison, Andrew; Christensen, Steen Hyldgaard; Botin, Lars

    contexts, or sites, for mixing scientific knowledge and technical skills from different fields and social domains into new combinations, thus fostering what the authors term a “hybrid imagination”. Such a hybrid imagination is especially important today, as a way to counter the competitive and commercial...

  11. Hybrid trajectory spaces

    NARCIS (Netherlands)

    Collins, P.J.

    2005-01-01

    In this paper, we present a general framework for describing and studying hybrid systems. We represent the trajectories of the system as functions on a hybrid time domain, and the system itself by its trajectory space, which is the set of all possible trajectories. The trajectory space is given a na

  12. Editorial: Hybrid Systems

    DEFF Research Database (Denmark)

    Olderog, Ernst-Rüdiger; Ravn, Anders Peter

    2007-01-01

    An introduction to three papers in a special issue on Hybrid Systems. These paper were first presented at an IFIP WG 2.2 meeting in Skagen 2005.......An introduction to three papers in a special issue on Hybrid Systems. These paper were first presented at an IFIP WG 2.2 meeting in Skagen 2005....

  13. CMS Silicon Tracker Module Assembly and Testing at FNAL

    CERN Document Server

    Coppage, Don; Gerber, Cecilia Elena; Kahl, William E; Medel, E; Ronzhin, Anatoly; Sogut, Kenan; Shabalina, Elizaveta; Spiegel, Leonard; Ten, Timour Borisovich

    2005-01-01

    This note is intended to provide details on a recent activity at FNAL in which CMS Tracker Outer Barrel modules were assembled and tested as part of a qualification of some of the sensor fabrication lines. At the same time the note serves to document the assembly and testing operations at FNAL for CMS silicon tracker modules. Of the 88 modules produced fo the qualification study at FNAL, one module was outside the mechanical alignment specification. For module bonding an introduced failure rate of 4.0x10^-4 faults per channel was observed. Eighty-five of the modules passed the full set of electrical tests. Two of the failures could be attributed to the sensors and one to a problem with the front-end hybrid. Additionally, a couple of the passed modules drew unusually high leakage currents. The high current modules are discussed in some detail.

  14. CMS Silicon Tracker Module Assembly and Testing at FNAL

    CERN Document Server

    Coppage, Don; Gerber, Cecilia Elena; Kahl, William E; Medel, E; Ronzhin, Anatoly; Sogut, Kenan; Shabalina, Elizaveta; Spiegel, Leonard; Ten, Timour Borisovich

    2005-01-01

    This note is intended to provide details on a recent activity at FNAL in which CMS Tracker Outer Barrel modules were assembled and tested as part of a qualification of some of the sensor fabrication lines. At the same time the note serves to document the assembly and testing operations at FNAL for CMS silicon tracker modules. Of the 88 modules produced fo the qualification study at FNAL, one module was outside the mechanical alignment specification. For module bonding an introduced failure rate of 4.0x10^-4 faults per channel was observed. Eighty-five of the modules passed the full set of electrical tests. Two of the failures could be attributed to the sensors and one to a problem with the front-end hybrid. Additionally, a couple of the passed modules drew unusually high leakage currents. The high current modules are discussed in some detail.

  15. Module Evaluation

    Science.gov (United States)

    2006-02-01

    MODULES IN LIFE TEST CHAMBER (LEFT SIDE) 68 MODULE TRANSMIT TEMP CA1 54.8°C CB1 65.3°C CC1 70.5°C CD1 75.2°C CE1 68.5°C CA2 72.1°C CB2 ...NO. PA (Contractor) PA (MELTS) DRV (Contractor) DRV (MELTS) CA1 058 +11.0 VOLTS +10.3 VOLTS + 7.5 VOLTS + 3.64 VOLTS CB1 085 +11.0 VOLTS +10.13...CE1 032 +11.0 VOLTS + 7.02 VOLTS + 7.5 VOLTS + 4.23 VOLTS CA2 065 +11.0 VOLTS +11.03 VOLTS + 7.5 VOLTS + 7.53 VOLTS CB2 057 +11.0 VOLTS + 9.49

  16. ATLAS SCT - Progress on the Silicon Modules

    CERN Multimedia

    Tyndel, M.

    The ATLAS SCT consists of 4088 silicon modules. Each module is made up of 4 silicon sensors with 1536 readout strips. Individual strips are connected to FE amplifiers, discriminators and pipelines on the module, i.e. there are 12 radiation hard ASICs, each containing 128 channels on the module. The sensors and the ASICs were developed for the ATLAS experiment and production is proceeding smoothly with over half the components delivered. The components of a module - 4 silicon sensors, a Cu/polyimide hybrid and pitch adaptor, and 12 ASICs - need to be carefully and precisely assembled onto a carbon and ceramic framework, which supports the module and removes the heat. Eleven production clusters are preparing to carry this out over the next two years. An important milestone for the barrel modules has been passed with the first cluster (KEK) now in production (~40 modules produced). A second cluster UK-B has qualified by producing five modules within specification (see below) and is about to start production. T...

  17. Hybrid reactors. [Fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.

    1980-09-09

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of /sup 233/U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m/sup -2/, and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid.

  18. Hybrid propulsion technology program

    Science.gov (United States)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  19. Module descriptor

    DEFF Research Database (Denmark)

    Vincenti, Gordon; Klausen, Bodil; Kjær Jensen, Jesper

    2016-01-01

    The Module Descriptor including a Teacher’s Guide explains and describes how to work innovatively and co-creatively with wicked problems and young people. The descriptor shows how interested educators and lecturers in Europe can copy the lessons of the Erasmus+ project HIP when teaching their own...... students how to include marginalized young people and practitioners in the education of future social workers and social educators....

  20. Module descriptor

    DEFF Research Database (Denmark)

    Vincenti, Gordon; Klausen, Bodil; Kjær Jensen, Jesper

    2016-01-01

    The Module Descriptor including a Teacher’s Guide explains and describes how to work innovatively and co-creatively with wicked problems and young people. The descriptor shows how interested educators and lecturers in Europe can copy the lessons of the Erasmus+ project HIP when teaching their own...... students how to include marginalized young people and practitioners in the education of future social workers and social educators....

  1. Hybrid Photonic Integration on a Polymer Platform

    Directory of Open Access Journals (Sweden)

    Ziyang Zhang

    2015-09-01

    Full Text Available To fulfill the functionality demands from the fast developing optical networks, a hybrid integration approach allows for combining the advantages of various material platforms. We have established a polymer-based hybrid integration platform (polyboard, which provides flexible optical input/ouptut interfaces (I/Os that allow robust coupling of indium phosphide (InP-based active components, passive insertion of thin-film-based optical elements, and on-chip attachment of optical fibers. This work reviews the recent progress of our polyboard platform. On the fundamental level, multi-core waveguides and polymer/silicon nitride heterogeneous waveguides have been fabricated, broadening device design possibilities and enabling 3D photonic integration. Furthermore, 40-channel optical line terminals and compact, bi-directional optical network units have been developed as highly functional, low-cost devices for the wavelength division multiplexed passive optical network. On a larger scale, thermo-optic elements, thin-film elements and an InP gain chip have been integrated on the polyboard to realize a colorless, dual-polarization optical 90° hybrid as the frontend of a coherent receiver. For high-end applications, a wavelength tunable 100Gbaud transmitter module has been demonstrated, manifesting the joint contribution from the polyboard technology, high speed polymer electro-optic modulator, InP driver electronics and ceramic electronic interconnects.

  2. Predicting bending stiffness of randomly oriented hybrid panels

    Science.gov (United States)

    Laura Moya; William T.Y. Tze; Jerrold E. Winandy

    2010-01-01

    This study was conducted to develop a simple model to predict the bending modulus of elasticity (MOE) of randomly oriented hybrid panels. The modeling process involved three modules: the behavior of a single layer was computed by applying micromechanics equations, layer properties were adjusted for densification effects, and the entire panel was modeled as a three-...

  3. Photovoltaic module and module arrays

    Science.gov (United States)

    Botkin, Jonathan; Graves, Simon; Lenox, Carl J. S.; Culligan, Matthew; Danning, Matt

    2012-07-17

    A photovoltaic (PV) module including a PV device and a frame. The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  4. Photonic Integration on the Hybrid Silicon Evanescent Device Platform

    Directory of Open Access Journals (Sweden)

    Hyundai Park

    2008-01-01

    Full Text Available This paper reviews the recent progress of hybrid silicon evanescent devices. The hybrid silicon evanescent device structure consists of III-V epitaxial layers transferred to silicon waveguides through a low-temperature wafer bonding process to achieve optical gain, absorption, and modulation efficiently on a silicon photonics platform. The low-temperature wafer bonding process enables fusion of two different material systems without degradation of material quality and is scalable to wafer-level bonding. Lasers, amplifiers, photodetectors, and modulators have been demonstrated with this hybrid structure and integration of these individual components for improved optical functionality is also presented. This approach provides a unique way to build photonic active devices on silicon and should allow application of silicon photonic integrated circuits to optical telecommunication and optical interconnects.

  5. Design of a digital modulator and demodulator for reader-less RFID Tag in 0.18 µm CMOS process - doi: 10.4025/actascitechnol.v35i2.15202

    Directory of Open Access Journals (Sweden)

    Syedul Amin

    2013-04-01

    Full Text Available Both the Radio Frequency Identification (RFID and Wireless Fidelity (WiFi are popular and ubiquitous technologies. However, RFID is lagging behind due to vendor specific solutions and excessive reader cost. A WiFi compatible IEEE 802.11 RFID tag can eliminate the reader. A digital modulator and demodulator for the reader-less RFID tag in IEEE 802.11 protocol employing Direct Sequence Spread Spectrum (DSSS and Barker code are proposed in this paper. To generate the 11-bit Barker code, MOD-11 synchronous counter and encoder are designed by utilizing only four D flip-flops instead of preloading the code sequence in multiple registers. For modulation, data are multiplied with this Barker code and for demodulation, the received data are multiplied with the same Barker code. Designed in 0.18 µm CMOS technology, the minimum, average and maximum power consumptions are 3.64 nA, 17.64 µA and 7.61 mA, respectively. The simulation results show the correct functionality of the modulator and demodulator where 1 bit is spread to 11 bits and 11 bits received data are de-spread to 1 bit, respectively. The design would help to implement the modulator and demodulator for the reader-less RFID tag with resistance to multi-path fading and interference and covering the highest distance with lower Bit Error Rate (BER.  

  6. Fluorescent hybridization probes for nucleic acid detection.

    Science.gov (United States)

    Guo, Jia; Ju, Jingyue; Turro, Nicholas J

    2012-04-01

    Due to their high sensitivity and selectivity, minimum interference with living biological systems, and ease of design and synthesis, fluorescent hybridization probes have been widely used to detect nucleic acids both in vivo and in vitro. Molecular beacons (MBs) and binary probes (BPs) are two very important hybridization probes that are designed based on well-established photophysical principles. These probes have shown particular applicability in a variety of studies, such as mRNA tracking, single nucleotide polymorphism (SNP) detection, polymerase chain reaction (PCR) monitoring, and microorganism identification. Molecular beacons are hairpin oligonucleotide probes that present distinctive fluorescent signatures in the presence and absence of their target. Binary probes consist of two fluorescently labeled oligonucleotide strands that can hybridize to adjacent regions of their target and generate distinctive fluorescence signals. These probes have been extensively studied and modified for different applications by modulating their structures or using various combinations of fluorophores, excimer-forming molecules, and metal complexes. This review describes the applicability and advantages of various hybridization probes that utilize novel and creative design to enhance their target detection sensitivity and specificity.

  7. Hybrid electric vehicles TOPTEC

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-21

    This one-day TOPTEC session began with an overview of hybrid electric vehicle technology. Updates were given on alternative types of energy storage, APU control for low emissions, simulation programs, and industry and government activities. The keynote speech was about battery technology, a key element to the success of hybrids. The TOPEC concluded with a panel discussion on the mission of hybrid electric vehicles, with a perspective from industry and government experts from United States and Canada on their view of the role of this technology.

  8. Hybrid systems with constraints

    CERN Document Server

    Daafouz, Jamal; Sigalotti, Mario

    2013-01-01

    Control theory is the main subject of this title, in particular analysis and control design for hybrid dynamic systems.The notion of hybrid systems offers a strong theoretical and unified framework to cope with the modeling, analysis and control design of systems where both continuous and discrete dynamics interact. The theory of hybrid systems has been the subject of intensive research over the last decade and a large number of diverse and challenging problems have been investigated. Nevertheless, many important mathematical problems remain open.This book is dedicated mainly to

  9. Hybrid Bloch Brane

    CERN Document Server

    Bazeia, D; Losano, L

    2016-01-01

    This work reports on models described by two real scalar fields coupled with gravity in the five-dimensional spacetime, with a warped geometry involving one infinite extra dimension. Through a mechanism that smoothly changes a thick brane into a hybrid brane, one investigates the appearance of hybrid branes hosting internal structure, characterized by the splitting on the energy density and the volcano potential, induced by the parameter which controls interactions between the two scalar fields. In particular, we investigate distinct symmetric and asymmetric hybrid brane scenarios.

  10. Hybrid Bloch brane

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Lima, Elisama E.M.; Losano, L. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil)

    2017-02-15

    This work reports on models described by two real scalar fields coupled with gravity in the five-dimensional spacetime, with a warped geometry involving one infinite extra dimension. Through a mechanism that smoothly changes a thick brane into a hybrid brane, one investigates the appearance of hybrid branes hosting internal structure, characterized by the splitting on the energy density and the volcano potential, induced by the parameter which controls interactions between the two scalar fields. In particular, we investigate distinct symmetric and asymmetric hybrid brane scenarios. (orig.)

  11. Hybrid silicon evanescent devices

    Directory of Open Access Journals (Sweden)

    Alexander W. Fang

    2007-07-01

    Full Text Available Si photonics as an integration platform has recently been a focus of optoelectronics research because of the promise of low-cost manufacturing based on the ubiquitous electronics fabrication infrastructure. The key challenge for Si photonic systems is the realization of compact, electrically driven optical gain elements. We review our recent developments in hybrid Si evanescent devices. We have demonstrated electrically pumped lasers, amplifiers, and photodetectors that can provide a low-cost, scalable solution for hybrid integration on a Si platform by using a novel hybrid waveguide architecture, consisting of III-V quantum wells bonded to Si waveguides.

  12. Chaotic mixer improves microarray hybridization.

    Science.gov (United States)

    McQuain, Mark K; Seale, Kevin; Peek, Joel; Fisher, Timothy S; Levy, Shawn; Stremler, Mark A; Haselton, Frederick R

    2004-02-15

    Hybridization is an important aspect of microarray experimental design which influences array signal levels and the repeatability of data within an array and across different arrays. Current methods typically require 24h and use target inefficiently. In these studies, we compare hybridization signals obtained in conventional static hybridization, which depends on diffusional target delivery, with signals obtained in a dynamic hybridization chamber, which employs a fluid mixer based on chaotic advection theory to deliver targets across a conventional glass slide array. Microarrays were printed with a pattern of 102 identical probe spots containing a 65-mer oligonucleotide capture probe. Hybridization of a 725-bp fluorescently labeled target was used to measure average target hybridization levels, local signal-to-noise ratios, and array hybridization uniformity. Dynamic hybridization for 1h with 1 or 10ng of target DNA increased hybridization signal intensities approximately threefold over a 24-h static hybridization. Similarly, a 10- or 60-min dynamic hybridization of 10ng of target DNA increased hybridization signal intensities fourfold over a 24h static hybridization. In time course studies, static hybridization reached a maximum within 8 to 12h using either 1 or 10ng of target. In time course studies using the dynamic hybridization chamber, hybridization using 1ng of target increased to a maximum at 4h and that using 10ng of target did not vary over the time points tested. In comparison to static hybridization, dynamic hybridization reduced the signal-to-noise ratios threefold and reduced spot-to-spot variation twofold. Therefore, we conclude that dynamic hybridization based on a chaotic mixer design improves both the speed of hybridization and the maximum level of hybridization while increasing signal-to-noise ratios and reducing spot-to-spot variation.

  13. A fiber optic hybrid multifunctional AC voltage sensor

    Energy Technology Data Exchange (ETDEWEB)

    Sokolovsky, A.; Zadvornov, S. [IRE, Moscow (Russian Federation); Ryabko, M. [UFD, Moscow (Russian Federation)

    2008-07-01

    Hybrid sensors have the advantages of both electronic and optical technologies. Their sensing element is based on conventional transducers and the optical fiber is used as a transmission media for the optical signal encoded with information between the local module and the remote module. The power supply for the remote module is usually provided by a built-in photoelectric converter illuminated by the optical radiation going through the same or another optical fiber. Electro-optic hybrid sensors have been widely used because of the electrical isolation provided by optical fiber. In the conventional fiber optic voltage sensor, piezoelectric or electro-optic transducers are implemented. Processing and conditioning measurement information is a complex task in these sensors. Moreover, the considerable drawback of most of these systems is that only one parameter, usually voltage value, is measured. This paper presented a novel fiber optic hybrid sensor for alternating current voltage measurements. This instrument provides the simultaneous measurement of four parameters, notably voltage value, frequency, phase angle and the external temperature. The paper described the measurement technology of the instrument including the remote module and optical powering as well as the unique modulation algorithm. The results and conclusions were also presented. 7 refs., 4 figs.

  14. Hybrid polymer microspheres

    Science.gov (United States)

    Rembaum, A.

    1980-01-01

    Techniques have been successfully tested for bonding polymeric spheres, typically 0.1 micron in diameter, to spheres with diameter up to 100 microns. Hybrids are being developed as improved packing material for ion-exchange columns, filters, and separators.

  15. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  16. Hybrid photon detectors

    CERN Document Server

    D'Ambrosio, C

    2003-01-01

    Hybrid photon detectors detect light via vacuum photocathodes and accelerate the emitted photoelectrons by an electric field towards inversely polarized silicon anodes, where they are absorbed, thus producing electron-hole pairs. These, in turn, are collected and generate electronic signals on their ohmic contacts. This review first describes the characteristic properties of the main components of hybrid photon detectors: light entrance windows, photocathodes, and silicon anodes. Then, essential relations describing the trajectories of photoelectrons in electric and magnetic fields and their backscattering from the silicon anodes are derived. Depending on their anode configurations, three families of hybrid photon detectors are presented: hybrid photomultiplier tubes with single anodes for photon counting with high sensitivity and for gamma spectroscopy; multi-anode photon detector tubes with anodes subdivided into square or hexagonal pads for position-sensitive photon detection; imaging silicon pixel array t...

  17. Functional hybrid materials

    National Research Council Canada - National Science Library

    Fahmi, Amir; Pietsch, Torsten; Mendoza, Cesar; Cheval, Nicolas

    2009-01-01

    .... This paper describes our group's achievements towards the development of multifunctional nanostructures via self-assembly of hybrid systems based on the block copolymer PS-b-P4VP and inorganic nanoparticles (NPs...

  18. Hybrid Rocket Technology

    Directory of Open Access Journals (Sweden)

    Sankaran Venugopal

    2011-04-01

    Full Text Available With their unique operational characteristics, hybrid rockets can potentially provide safer, lower-cost avenues for spacecraft and missiles than the current solid propellant and liquid propellant systems. Classical hybrids can be throttled for thrust tailoring, perform in-flight motor shutdown and restart. In classical hybrids, the fuel is stored in the form of a solid grain, requiring only half the feed system hardware of liquid bipropellant engines. The commonly used fuels are benign, nontoxic, and not hazardous to store and transport. Solid fuel grains are not highly susceptible to cracks, imperfections, and environmental temperature and are therefore safer to manufacture, store, transport, and use for launch. The status of development based on the experience of the last few decades indicating the maturity of the hybrid rocket technology is given in brief.Defence Science Journal, 2011, 61(3, pp.193-200, DOI:http://dx.doi.org/10.14429/dsj.61.518

  19. Nitrous Paraffin Hybrid Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nitrous Oxide Paraffin Hybrid engine (N2OP) is a proposed technology designed to provide small launch vehicles with high specific impulse, indefinitely storable...

  20. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  1. Solar energy in double-pack? Hybrid collectors; Sonne im Doppelpack? Hybridkollektoren

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2012-07-01

    The scarce roof space could be utilized more efficient by means of modules which supply electricity as well as thermal energy for the generation of hot water or heating processes. Nethertheless, these solar modules do not harmonize optimally. Thus, the so-called hybrid technology prevails only hesitantly.

  2. Hybridity in Disgrace

    Institute of Scientific and Technical Information of China (English)

    刘建平

    2015-01-01

    John Maxwell Coetzee's masterpiece-Disgrace is the representative work about post colonialism.The novel describes a series of disgraceful events happened between the white and the black in the post apartheid South Africa.The famous literature theory-hybridity of Homi K.Bhabha is the very key theory to analyze the work.In post apartheid South Africa,hybridity is the only way for the white and the black to coexist.

  3. Hybrid Baryon Signatures

    CERN Document Server

    Page, P R

    2000-01-01

    We discuss whether a low-lying hybrid baryon should be defined as a three quark - gluon bound state or as three quarks moving on an excited adiabatic potential. We show that the latter definition becomes exact, not only for very heavy quarks, but also for specific dynamics. We review the literature on the signatures of hybrid baryons, with specific reference to strong hadronic decays, electromagnetic couplings, diffractive production and production in psi decay.

  4. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  5. Requirements for Hybrid Cosimulation

    Science.gov (United States)

    2014-08-16

    hybrid cosimulation version of the Functional Mockup Interface (FMI) standard. A cosimulation standard de nes interfaces that enable diverse simulation...cosimulation standards, and specifically provides guidance for development of a hybrid cosimulation version of the Functional Mockup Interface (FMI) standard...V. Peetz, and S. Wolf. The functional mockup interface for tool independent exchange of simulation models. In Proc. of the 8-th International

  6. Synthetic focusing in ultrasound modulated tomography

    KAUST Repository

    Kuchment, Peter

    2010-09-01

    Several hybrid tomographic methods utilizing ultrasound modulation have been introduced lately. Success of these methods hinges on the feasibility of focusing ultrasound waves at an arbitrary point of interest. Such focusing, however, is difficult to achieve in practice. We thus propose a way to avoid the use of focused waves through what we call synthetic focusing, i.e. by reconstructing the would-be response to the focused modulation from the measurements corresponding to realistic unfocused waves. Examples of reconstructions from simulated data are provided. This non-technical paper describes only the general concept, while technical details will appear elsewhere. © 2010 American Institute of Mathematical Sciences.

  7. Hybrid silicon evanescent approach to optical interconnects

    Science.gov (United States)

    Liang, Di; Fang, Alexander W.; Chen, Hui-Wen; Sysak, Matthew N.; Koch, Brian R.; Lively, Erica; Raday, Omri; Kuo, Ying-Hao; Jones, Richard; Bowers, John E.

    2009-06-01

    We discuss the recently developed hybrid silicon evanescent platform (HSEP), and its application as a promising candidate for optical interconnects in silicon. A number of key discrete components and a wafer-scale integration process are reviewed. The motivation behind this work is to realize silicon-based photonic integrated circuits possessing unique advantages of III-V materials and silicon-on-insulator waveguides simultaneously through a complementary metal-oxide semiconductor fabrication process. Electrically pumped hybrid silicon distributed feedback and distributed Bragg reflector lasers with integrated hybrid silicon photodetectors are demonstrated coupled to SOI waveguides, serving as the reliable on-chip single-frequency light sources. For the external signal processing, Mach-Zehnder interferometer modulators are demonstrated, showing a resistance-capacitance-limited, 3 dB electrical bandwidth up to 8 GHz and a modulation efficiency of 1.5 V mm. The successful implementation of quantum well intermixing technique opens up the possibility to realize multiple III-V bandgaps in this platform. Sampled grating DBR devices integrated with electroabsorption modulators (EAM) are fabricated, where the bandgaps in gain, mirror, and EAM regions are 1520, 1440 and 1480 nm, respectively. The high-temperature operation characteristics of the HSEP are studied experimentally and theoretically. An overall characteristic temperature ( T 0) of 51°C, an above threshold characteristic temperature ( T 1) of 100°C, and a thermal impedance ( Z T ) of 41.8°C/W, which agrees with the theoretical prediction of 43.5°C/W, are extracted from the Fabry-Perot devices. Scaling this platform to larger dimensions is demonstrated up to 150 mm wafer diameter. A vertical outgassing channel design is developed to accomplish high-quality III-V epitaxial transfer to silicon in a timely and dimension-independent fashion.

  8. MEMORY MODULATION

    Science.gov (United States)

    Roozendaal, Benno; McGaugh, James L.

    2011-01-01

    Our memories are not all created equally strong: Some experiences are well remembered while others are remembered poorly, if at all. Research on memory modulation investigates the neurobiological processes and systems that contribute to such differences in the strength of our memories. Extensive evidence from both animal and human research indicates that emotionally significant experiences activate hormonal and brain systems that regulate the consolidation of newly acquired memories. These effects are integrated through noradrenergic activation of the basolateral amygdala which regulates memory consolidation via interactions with many other brain regions involved in consolidating memories of recent experiences. Modulatory systems not only influence neurobiological processes underlying the consolidation of new information, but also affect other mnemonic processes, including memory extinction, memory recall and working memory. In contrast to their enhancing effects on consolidation, adrenal stress hormones impair memory retrieval and working memory. Such effects, as with memory consolidation, require noradrenergic activation of the basolateral amygdala and interactions with other brain regions. PMID:22122145

  9. Advanced screencasting with embedded assessments in pathophysiology and therapeutics course modules

    National Research Council Canada - National Science Library

    Woodruff, Ashley E; Jensen, Megan; Loeffler, William; Avery, Lisa

    2014-01-01

      The objective of the study is to implement and assess the effectiveness of a hybrid learning model using advanced screencasting with embedded assessments in pathophysiology and therapeutics modules...

  10. Mathematical Modeling of Hybrid Electrical Engineering Systems

    Directory of Open Access Journals (Sweden)

    A. A. Lobaty

    2016-01-01

    Full Text Available A large class of systems that have found application in various industries and households, electrified transportation facilities and energy sector has been classified as electrical engineering systems. Their characteristic feature is a combination of continuous and discontinuous modes of operation, which is reflected in the appearance of a relatively new term “hybrid systems”. A wide class of hybrid systems is pulsed DC converters operating in a pulse width modulation, which are non-linear systems with variable structure. Using various methods for linearization it is possible to obtain linear mathematical models that rather accurately simulate behavior of such systems. However, the presence in the mathematical models of exponential nonlinearities creates considerable difficulties in the implementation of digital hardware. The solution can be found while using an approximation of exponential functions by polynomials of the first order, that, however, violates the rigor accordance of the analytical model with characteristics of a real object. There are two practical approaches to synthesize algorithms for control of hybrid systems. The first approach is based on the representation of the whole system by a discrete model which is described by difference equations that makes it possible to synthesize discrete algorithms. The second approach is based on description of the system by differential equations. The equations describe synthesis of continuous algorithms and their further implementation in a digital computer included in the control loop system. The paper considers modeling of a hybrid electrical engineering system using differential equations. Neglecting the pulse duration, it has been proposed to describe behavior of vector components in phase coordinates of the hybrid system by stochastic differential equations containing generally non-linear differentiable random functions. A stochastic vector-matrix equation describing dynamics of the

  11. Development of a high density pixel multichip module at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, G. [and others

    2001-03-08

    At Fermilab, both pixel detector multichip module and sensor hybridization are being developed for the BTeV experiment. The BTeV pixel detector is based on a design relying on a hybrid approach. With this approach, the readout chip and the sensor array are developed separately and the detector is constructed by flip-chip mating the two together. This method offers maximum flexibility in the development process, choice of fabrication technologies, and the choice of sensor material. This paper presents strategies to handle the required data rate and performance results of the first prototype and detector hybridization.

  12. Hybrid centralized-distributed power conditioning system for thermoelectric generator with high energy efficiency

    DEFF Research Database (Denmark)

    Wu, Hongfei; Sun, Kai; Chen, Min;

    2013-01-01

    The unbalanced temperature distribution influences the power output of thermoelectric generator (TEG) system, which leads to mismatch power among TEG modules. This mismatch power degrades the energy efficiency of TEG systems based on the series-connected TEG modules. A hybrid centralized-distribu......The unbalanced temperature distribution influences the power output of thermoelectric generator (TEG) system, which leads to mismatch power among TEG modules. This mismatch power degrades the energy efficiency of TEG systems based on the series-connected TEG modules. A hybrid centralized...... the proposed system, which benefits for implementing high MPPT efficiency and high conversion efficiency simultaneously. A hybrid MPPT control strategy is proposed for this HCD power conditioning system. The characteristics, circuit implementation and operation principles of the proposed system are presented...

  13. The possibility of developing hybrid PV/T solar system

    Science.gov (United States)

    Dobrnjac, M.; Zivkovic, P.; Babic, V.

    2017-05-01

    An alternative and cost-effective solution to developing integrated PV system is to use hybrid photovoltaic/thermal (PV/T) solar system. The temperature of PV modules increases due to the absorbed solar radiation that is not converted into electricity, causing a decrease in their efficiency. In hybrid PV/T solar systems the reduction of PV module temperature can be combined with a useful fluid heating. In this paper we present the possibility of developing a new hybrid PV/T solar system. Hybrid PV/T system can provide electrical and thermal energy, thus achieving a higher energy conversion rate of the absorbed solar radiation. We developed PV/T prototype consisted of commercial PV module and thermal panel with our original solution of aluminium absorber with special geometric shapes. The main advantages of our combined PV/T system are: removing of heat from the PV panel; extending the lifetime of photovoltaic cells; excess of the removing heat from PV part is used to heat the fluid in the thermal part of the panel; the possibility of using on the roof and facade constructions because less weight.

  14. The Hybrids of Postmodernism

    Directory of Open Access Journals (Sweden)

    Dana BĂDULESCU

    2014-09-01

    Full Text Available Hybridization is a fundamental characteristic of postmodernism, included by Ihab Hassan in his “catena” of features. This paper looks into the hybrids of postmodernism, which are the result of migration, displacement and uprooting, the re-visitation of myths, folklore and legends, or projections of their author’s imagination. The hybrids used as examples here are drawn from several novels written by Salman Rushdie, especially The Satanic Verses, two short stories, one by Márquez and the other by Donald Barthelme, Borges’s Book of Imaginary Beings, Cărtărescu’s Encyclopaedia of Dragons and Michelle Cliff’s No Telephone to Heaven. Diverse as they may be, these hybrids emphasize a defining characteristic of postmodernism, which is its pluralism. I conclude that the hybrids of postmodernism are aesthetically or politically subversive. Besides, what makes them difficult to grasp is their unfixed and protean nature. They ask for high leaps of the imagination, a total suspension of disbelief and a complete surrender to the powerful seduction of imagination on the reader’s part.

  15. Arrays of surface-normal electroabsorption modulators for the generation and signal processing of microwave photonics signals

    NARCIS (Netherlands)

    Noharet, Bertrand; Wang, Qin; Platt, Duncan; Junique, Stéphane; Marpaung, D.A.I.; Roeloffzen, C.G.H.

    2011-01-01

    The development of an array of 16 surface-normal electroabsorption modulators operating at 1550nm is presented. The modulator array is dedicated to the generation and processing of microwave photonics signals, targeting a modulation bandwidth in excess of 5GHz. The hybrid integration of the

  16. Research on Hybrid Vehicle Drivetrain

    Science.gov (United States)

    Xie, Zhongzhi

    Hybrid cars as a solution to energy saving, emission reduction measures, have received widespread attention. Motor drive system as an important part of the hybrid vehicles as an important object of study. Based on the hybrid electric vehicle powertrain control system for permanent magnet synchronous motor as the object of study. Can be applied to hybrid car compares the characteristics of traction motors, chose permanent magnet synchronous Motors as drive motors for hybrid vehicles. Building applications in hybrid cars in MATLAB/Simulink simulation model of permanent-magnet synchronous motor speed control system and analysis of simulation results.

  17. for hybrid dynamical systems

    Directory of Open Access Journals (Sweden)

    Wassim M. Haddad

    2001-01-01

    Full Text Available In this paper we develop a unified dynamical systems framework for a general class of systems possessing left-continuous flows; that is, left-continuous dynamical systems. These systems are shown to generalize virtually all existing notions of dynamical systems and include hybrid, impulsive, and switching dynamical systems as special cases. Furthermore, we generalize dissipativity, passivity, and nonexpansivity theory to left-continuous dynamical systems. Specifically, the classical concepts of system storage functions and supply rates are extended to left-continuous dynamical systems providing a generalized hybrid system energy interpretation in terms of stored energy, dissipated energy over the continuous-time dynamics, and dissipated energy over the resetting events. Finally, the generalized dissipativity notions are used to develop general stability criteria for feedback interconnections of left-continuous dynamical systems. These results generalize the positivity and small gain theorems to the case of left-continuous, hybrid, and impulsive dynamical systems.

  18. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Rönnkö, M.; Ravn, Anders Peter; Sere, K.

    2003-01-01

    In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time-derivatives in modell......In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time...... parallel composition. Moreover, as the strength of the action system formalism is the support for stepwise development by refinement, we investigate refinement involving a differential action. We show that, due to the predicate transformer semantics, standard action refinement techniques apply also...... to the differential action, thus, allowing stepwise development of hybrid systems Udgivelsesdato: JAN 1...

  19. Conditional Hybrid Nonclassicality

    Science.gov (United States)

    Agudelo, E.; Sperling, J.; Costanzo, L. S.; Bellini, M.; Zavatta, A.; Vogel, W.

    2017-09-01

    We derive and implement a general method to characterize the nonclassicality in compound discrete- and continuous-variable systems. For this purpose, we introduce the operational notion of conditional hybrid nonclassicality which relates to the ability to produce a nonclassical continuous-variable state by projecting onto a general superposition of discrete-variable subsystem. We discuss the importance of this form of quantumness in connection with interfaces for quantum communication. To verify the conditional hybrid nonclassicality, a matrix version of a nonclassicality quasiprobability is derived and its sampling approach is formulated. We experimentally generate an entangled, hybrid Schrödinger cat state, using a coherent photon-addition process acting on two temporal modes, and we directly sample its nonclassicality quasiprobability matrix. The introduced conditional quantum effects are certified with high statistical significance.

  20. Porosity in hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, D.W.; Beaucage, G.; Loy, D. [Sandia National Labs., Albuquerque, NM (United States)

    1995-12-31

    Multicomponent, or hybrid composites are emerging as precursors to porous materials. Sacrifice of an ephemeral phase can be used to generate porosity, the nature of which depends on precursor structure. Retention of an organic constituent, on the other hand, can add desirable toughness to an otherwise brittle ceramic. We use small-angle x-ray and neutron scattering to examine porosity in both simple and hybrid materials. We find that microphase separation controls porosity in almost all systems studied. Pore distributions are controlled by the detailed bonding within and between phases as well as the flexibility of polymeric constituents. Thus hybridization opens new regions of pore distributions not available in simple systems. We look at several sacrificial concepts and show that it is possible to generate multimodal pore size distributions due to the complicated phase structure in the precursor.

  1. Photoproduction of Hybrid Mesons

    CERN Document Server

    Barnes, T

    1998-01-01

    In this contribution I discuss prospects for photoproducing hybrid mesons at CEBAF, based on recent model results and experimental indications of possible hybrids. One excellent opportunity appears to be a search for the I=1, JPC=2+-, neutral "(b2)o" hybrid in (a2 pi)o through diffractive photoproduction. Other notable possibilities accessible through pi+ or pio exchange photoproduction are I=1, JPC=1-+, charged "pi1+" in f1 pi+, (b1 pi)+ and (rho pi)+; piJ(1770)+ in f2 pi+ and (b1 pi)+; pi(1800)+ in f0 pi+, f2 pi+, omega rho+ and (rho pi)+; a1 in f1 pi+ and f2 pi+; and omega in (rho pi)o, omega eta and (K1 K)o.

  2. Iterative Reconstruction Methods for Hybrid Inverse Problems in Impedance Tomography

    DEFF Research Database (Denmark)

    Hoffmann, Kristoffer; Knudsen, Kim

    2014-01-01

    For a general formulation of hybrid inverse problems in impedance tomography the Picard and Newton iterative schemes are adapted and four iterative reconstruction algorithms are developed. The general problem formulation includes several existing hybrid imaging modalities such as current density...... impedance imaging, magnetic resonance electrical impedance tomography, and ultrasound modulated electrical impedance tomography, and the unified approach to the reconstruction problem encompasses several algorithms suggested in the literature. The four proposed algorithms are implemented numerically in two...... be based on a theoretical analysis of the underlying inverse problem....

  3. Electronic properties of hybrid metal-discotic liquid crystal nanostructures

    Science.gov (United States)

    Kelsall, R. W.; Pecchia, A.; Bourlange, A.; Movaghar, B.; Evans, S. D.; Hickey, B. J.; Boden, N.

    2003-04-01

    A new class of hybrid organic/inorganic nanostructures, comprising self-organised discotic liquid crystal layers deposited on ultrathin metal films, has been investigated both experimentally and theoretically. Calculations show that the periodic self-organised molecular layer gives rise to a new, hybrid electronic bandstructure, resulting in modulation of the metal film conductivity. In situ conductivity measurements during deposition of such self-organised layers confirm that the metal film conductivity is altered. Theoretical modeling also shows that the AC conductivity should show structure related to the carrier trapping and one-dimensional transport features of the self-organised layer.

  4. Hybrid positioning with lighting LEDs and Zigbee multihop wireless network

    Science.gov (United States)

    Lee, Y. U.; Baang, S.; Park, J.; Zhou, Z.; Kavehrad, M.

    2012-01-01

    A simple, accurate, secure, long-lasting, and portable hybrid positioning system is proposed and designed in this paper. It consists of a lighting LED that generates visible light data corresponding to position information of a target and a Zigbee wireless network communication module with low power, security, and service area expansion characteristics. Under an indoor environment where there is 23.62m distance between an observer and the target, the presented hybrid positioning system is tested and is verified with the functions of Zigbee three hop wireless networking and visible light communication (VLC) scheme. The test results are analyzed and discussed.

  5. Smart hybrid rotary damper

    Science.gov (United States)

    Yang, C. S. Walter; DesRoches, Reginald

    2014-03-01

    This paper develops a smart hybrid rotary damper using a re-centering smart shape memory alloy (SMA) material as well as conventional energy-dissipating metallic plates that are easy to be replaced. The ends of the SMA and steel plates are inserted in the hinge. When the damper rotates, all the plates bend, providing energy dissipating and recentering characteristics. Such smart hybrid rotary dampers can be installed in structures to mitigate structural responses and to re-center automatically. The damaged energy-dissipating plates can be easily replaced promptly after an external excitation, reducing repair time and costs. An OpenSEES model of a smart hybrid rotary was established and calibrated to reproduce the realistic behavior measured from a full-scale experimental test. Furthermore, the seismic performance of a 3-story moment resisting model building with smart hybrid rotary dampers designed for downtown Los Angeles was also evaluated in the OpenSEES structural analysis software. Such a smart moment resisting frame exhibits perfect residual roof displacement, 0.006", extremely smaller than 18.04" for the conventional moment resisting frame subjected to a 2500 year return period ground motion for the downtown LA area (an amplified factor of 1.15 on Kobe earthquake). The smart hybrid rotary dampers are also applied into an eccentric braced steel frame, which combines a moment frame system and a bracing system. The results illustrate that adding smart hybrid rotaries in this braced system not only completely restores the building after an external excitation, but also significantly reduces peak interstory drifts.

  6. High reliability DC/DC converter module for electronic boards equipped with FPGAs

    Science.gov (United States)

    Viganò, W.; Boccardi, A.; Zamantzas, C.

    2015-01-01

    The Beam Instrumentation Group at CERN is designing a new general-purpose VME carrier module utilising several PTH04T230W DC/DC converters. These off-the-shelf converters are built with unshielded inductors and need to be mounted on the printed circuit board as stand-alone components. Thus, reducing the global manageability and increasing the total cost of the carrier module. The new design aims to develop a module with better power dissipation, efficiency and reliability. In the future, it should be also possible to be directly integrated on the mainboard. For this reason, a Buck DC/DC converter has been implemented with the following main characteristics: input range from 3.0 V to 5.5 V; output range from 0.6 V to 3.3 V, settable by means of an external resistor; output current protection at 6 A; maximum output ripple ± 50 mVpp; switching frequency of 300KHz; short circuit protection; On/Off function; EMI reduction with frequency spread spectrum; soft-start function and thermal shutdown, in a 16 × 19 mm compact size. The selected buck controller is the TPS40303 integrated circuit and drives the CSD16321 power MOSFET, both from Texas Instruments. All selected components have been used at a minimum derating of 50% to reduce component stress and increase the reliability of this module. The selected inductors, i.e. Bourns SRP1055, are the main contributor for the high efficiency (95%), due to their very low equivalent series resistance. On the 4-layer PCB comprising all the components of this module, a snubber circuit, for further reduction of the output ripple due to the MOSFET ringing, can be mounted optionally. It is left as an option due to its effect on the total efficiency. The board layout has been optimized for maximum heat transfer and it can be used without active cooling. The board can maintain the maximum temperature on its surface, while at maximum current output, below 55°C at 25°C ambient temperature. An example of the electrical performance

  7. Analog and hybrid computing

    CERN Document Server

    Hyndman, D E

    2013-01-01

    Analog and Hybrid Computing focuses on the operations of analog and hybrid computers. The book first outlines the history of computing devices that influenced the creation of analog and digital computers. The types of problems to be solved on computers, computing systems, and digital computers are discussed. The text looks at the theory and operation of electronic analog computers, including linear and non-linear computing units and use of analog computers as operational amplifiers. The monograph examines the preparation of problems to be deciphered on computers. Flow diagrams, methods of ampl

  8. Hybrid Weyl semimetal

    Science.gov (United States)

    Li, Fei-Ye; Luo, Xi; Dai, Xi; Yu, Yue; Zhang, Fan; Chen, Gang

    2016-09-01

    We construct a tight-binding model realizing one pair of Weyl nodes and three distinct Weyl semimetals. In the type-I (type-II) Weyl semimetal, both nodes belong to type-I (type-II) Weyl nodes. In addition, there exists a third type, previously undiscovered and dubbed "hybrid Weyl semimetal", in which one Weyl node is of type I while the other is of type II. For the hybrid Weyl semimetal, we further demonstrate the bulk Fermi surfaces and the topologically protected surface states, analyze the unique Landau-level structure and quantum oscillation, and discuss the conditions for possible material realization.

  9. Toyota hybrid synergy drive

    Energy Technology Data Exchange (ETDEWEB)

    Gautschi, H.

    2008-07-01

    This presentation made at the Swiss 2008 research conference on traffic by Hannes Gautschi, director of service and training at the Toyota company in Switzerland, takes a look at Toyota's hybrid drive vehicles. The construction of the vehicles and their combined combustion engines and electric generators and drives is presented and the combined operation of these components is described. Braking and energy recovery are discussed. Figures on the performance, fuel consumption and CO{sub 2} output of the hybrid vehicles are compared with those of conventional vehicles.

  10. Toyota hybrid synergy drive

    Energy Technology Data Exchange (ETDEWEB)

    Gautschi, H.

    2008-07-01

    This presentation made at the Swiss 2008 research conference on traffic by Hannes Gautschi, director of service and training at the Toyota company in Switzerland, takes a look at Toyota's hybrid drive vehicles. The construction of the vehicles and their combined combustion engines and electric generators and drives is presented and the combined operation of these components is described. Braking and energy recovery are discussed. Figures on the performance, fuel consumption and CO{sub 2} output of the hybrid vehicles are compared with those of conventional vehicles.

  11. THERMALLY CLEAVABLE HYBRID MATERIALS

    Directory of Open Access Journals (Sweden)

    Constantin Gaina

    2011-12-01

    Full Text Available Thermally cleavable hybrid materials were prepared by the Diels-Alder cycloaddition reaction of poly(vinyl furfural to N phenylmaleimido-N’-(triethoxysilylpropylurea followed by the sol-gel condensation reaction of trietoxysilyl groups with water and acetic acid. Thermal and dynamic mechanical analysis, dielectric and FTIR spectroscopy were used to characterize the structure and properties of the composites. The size of the inorganic silica particles in the hybrid material varied dependent on the silica content. The DSC study of the prepared materials revealed that the cleavage process of the formed cycloadducts takes place at temperatures varying between 143-165°C and is an endothermic process.

  12. Module theory, extending modules and generalizations

    CERN Document Server

    Tercan, Adnan

    2016-01-01

    The main focus of this monograph is to offer a comprehensive presentation of known and new results on various generalizations of CS-modules and CS-rings. Extending (or CS) modules are generalizations of injective (and also semisimple or uniform) modules. While the theory of CS-modules is well documented in monographs and textbooks, results on generalized forms of the CS property as well as dual notions are far less present in the literature. With their work the authors provide a solid background to module theory, accessible to anyone familiar with basic abstract algebra. The focus of the book is on direct sums of CS-modules and classes of modules related to CS-modules, such as relative (injective) ejective modules, (quasi) continuous modules, and lifting modules. In particular, matrix CS-rings are studied and clear proofs of fundamental decomposition results on CS-modules over commutative domains are given, thus complementing existing monographs in this area. Open problems round out the work and establish the...

  13. Cofinitely weak supplemented modules

    OpenAIRE

    Alizade, Rafail; Büyükaşık, Engin

    2003-01-01

    We prove that a module M is cofinitely weak supplemented or briefly cws (i.e., every submodule N of M with M/N finitely generated, has a weak supplement) if and only if every maximal submodule has a weak supplement. If M is a cws-module then every M-generated module is a cws-module. Every module is cws if and only if the ring is semilocal. We study also modules, whose finitely generated submodules have weak supplements.

  14. Optical modulators with two-dimensional layered materials

    CERN Document Server

    Sun, Zhipei; Wang, Feng

    2016-01-01

    Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as two-dimensional heterostructures, plasmonic structures, and silicon/fibre integrated structures. We also take a look at future perspectives and discuss the potential of yet relatively unexplored mechanisms such as magneto-optic and acousto-optic modulation.

  15. On generalized extending modules

    Institute of Scientific and Technical Information of China (English)

    ZENG Qing-yi

    2007-01-01

    A module M is called generalized extending if for any submodule N of M, there is a direct summand K of M such that N≤K and K/N is singular. Any extending module and any singular module are generalized extending. Any homomorphic image of a generalized extending module is generalized extending. Any direct sum of a singular (uniform) module and a semi-simple module is generalized extending. A ring R is a right Co-H-ring ifand only ifall right R modules are generalized extending modules.

  16. Alternative technological development for RF hybridization

    Science.gov (United States)

    Antônio Finardi, Célio; da Fontoura Ponchet, André; Battesini Adamo, Cristina; Flacker, Alexander; Cotrin Teixeira, Ricardo; Panepucci, Roberto Ricardo

    2017-03-01

    The paper presents a technological solution for high frequency packaging platform evaluated up to 40 GHz. The main purpose of this development was to define an alternative hybrid technology that is more flexible and faster to prototype compared with thin film or multi chip module (MCM-D). The alternative technology also shows adequate performance for high bit rate solutions integrating optical and electronics blocks. This approach consists of a soft substrate (laminate material), plating processes (electroless Ni-P/Au, electrolytic Au) and lithography patterning. Ground coplanar waveguide was used for microwave structures with excellent ground planes connections due to easy via holes implementation. We present results of high frequency packaging of important RF blocks, such as integrated broadband bias-T, transimpedance amplifier ICs and silicon photonics optical modulators. The paper demonstrates a solution for high frequency hybridization that can be implemented with standard substrates, designed with any shape and with large numbers of metalized via holes and compatible with usual assembling techniques.

  17. Theoretical study on stability of hybrid bilayers

    Science.gov (United States)

    Silva, Thiago S.; de Lima Bernardo, Bertúlio; Azevedo, Sèrgio

    2015-04-01

    Motivated by the recent experimental realization of the hybrid nanostructure of graphene and boron nitride (h-BN) sheet, and studies of gap modulation by strain, we use first principles calculations based on density functional theory to investigate the effects of strain in hybrid bilayers composed of two monolayers of graphene with a nanodomain of {{B}3}{{N}3}. The calculations were made with two different approximations for the functional exchange-correlation, GGA and VDW-DF. We investigate the modification in the electronic structure and structural properties of various configurations of the hybrid bilayers. Among the configurations, those with Bernal stacking are found to be more stable when compared to the others. Studies of the compressive strain influence were made only in the structure that has been shown to be the most stable. We have found that the two approximations used in the calculations exhibit the same results for the electronic properties of all structures. The opening of the energy gap due to strain was possible in the calculations by using the GGA approximation, but the same does not happen in the calculations using the VDW-DF approximation. Our analysis shows that the VDW-DF approximation is better suited for studies involving surfaces.

  18. Hybrid photonic chip interferometer for embedded metrology

    Science.gov (United States)

    Kumar, P.; Martin, H.; Maxwell, G.; Jiang, X.

    2014-03-01

    Embedded metrology is the provision of metrology on the manufacturing platform, enabling measurement without the removal of the work piece. Providing closer integration of metrology upon the manufacturing platform can lead to the better control and increased throughput. In this work we present the development of a high precision hybrid optical chip interferometer metrology device. The complete metrology sensor system is structured into two parts; optical chip and optical probe. The hybrid optical chip interferometer is based on a silica-on-silicon etched integrated-optic motherboard containing waveguide structures and evanescent couplers. Upon the motherboard, electro-optic components such as photodiodes and a semiconductor gain block are mounted and bonded to provide the required functionality. The key structure in the device is a tunable laser module based upon an external-cavity diode laser (ECDL). Within the cavity is a multi-layer thin film filter which is rotated to select the longitudinal mode at which the laser operates. An optical probe, which uses a blazed diffracting grating and collimating objective lens, focuses light of different wavelengths laterally over the measurand. Incident laser light is then tuned in wavelength time to effectively sweep an `optical stylus' over the surface. Wavelength scanning and rapid phase shifting can then retrieve the path length change and thus the surface height. We give an overview of the overall design of the final hybrid photonic chip interferometer, constituent components, device integration and packaging as well as experimental test results from the current version now under evaluation.

  19. TRNSYS HYBRID wind diesel PV simulator

    Energy Technology Data Exchange (ETDEWEB)

    Quinlan, P.J.A.; Mitchell, J.W.; Klein, S.A.; Beckman, W.A.; Blair, N.J. [Univ. of Wisconsin, Madison, WI (United States)

    1996-12-31

    The Solar Energy Laboratory (SEL) has developed a wind diesel PV hybrid systems simulator, UW-HYBRID 1.0, an application of the TRNSYS 14.2 time-series simulation environment. An AC/DC bus links up to five diesels and wind turbine models, along with PV modules, a battery bank, and an AC/DC converter. Multiple units can be selected. PV system simulations include solar angle and peak power tracking options. Weather data are Typical Meteorological Year data, parametrically generated synthesized data, or external data files. PV performance simulations rely on long-standing SEL-developed algorithms. Loads data are read as scalable time series. Diesel simulations include estimated fuel-use and waste heat output, and are dispatched using a least-cost of fuel strategy. Wind system simulations include varying air density, wind shear and wake effects. Time step duration is user-selectable. UW-HYBRID 1.0 runs in Windows{reg_sign}, with TRNSED providing a customizable user interface. 12 refs., 6 figs.

  20. A Mathematical Approach to Hybridization

    Science.gov (United States)

    Matthews, P. S. C.; Thompson, J. J.

    1975-01-01

    Presents an approach to hybridization which exploits the similarities between the algebra of wave functions and vectors. This method will account satisfactorily for the number of orbitals formed when applied to hybrids involving the s and p orbitals. (GS)