WorldWideScience

Sample records for hybrid radiation code

  1. Hybrid Noncoherent Network Coding

    CERN Document Server

    Skachek, Vitaly; Nedic, Angelia

    2011-01-01

    We describe a novel extension of subspace codes for noncoherent networks, suitable for use when the network is viewed as a communication system that introduces both dimension and symbol errors. We show that when symbol erasures occur in a significantly large number of different basis vectors transmitted through the network and when the min-cut of the networks is much smaller then the length of the transmitted codewords, the new family of codes outperforms their subspace code counterparts. For the proposed coding scheme, termed hybrid network coding, we derive two upper bounds on the size of the codes. These bounds represent a variation of the Singleton and of the sphere-packing bound. We show that a simple concatenated scheme that represents a combination of subspace codes and Reed-Solomon codes is asymptotically optimal with respect to the Singleton bound. Finally, we describe two efficient decoding algorithms for concatenated subspace codes that in certain cases have smaller complexity than subspace decoder...

  2. Hybrid radiator cooling system

    Science.gov (United States)

    France, David M.; Smith, David S.; Yu, Wenhua; Routbort, Jules L.

    2016-03-15

    A method and hybrid radiator-cooling apparatus for implementing enhanced radiator-cooling are provided. The hybrid radiator-cooling apparatus includes an air-side finned surface for air cooling; an elongated vertically extending surface extending outwardly from the air-side finned surface on a downstream air-side of the hybrid radiator; and a water supply for selectively providing evaporative cooling with water flow by gravity on the elongated vertically extending surface.

  3. Hybrid codes: Methods and applications

    Energy Technology Data Exchange (ETDEWEB)

    Winske, D. (Los Alamos National Lab., NM (USA)); Omidi, N. (California Univ., San Diego, La Jolla, CA (USA))

    1991-01-01

    In this chapter we discuss hybrid'' algorithms used in the study of low frequency electromagnetic phenomena, where one or more ion species are treated kinetically via standard PIC methods used in particle codes and the electrons are treated as a single charge neutralizing massless fluid. Other types of hybrid models are possible, as discussed in Winske and Quest, but hybrid codes with particle ions and massless fluid electrons have become the most common for simulating space plasma physics phenomena in the last decade, as we discuss in this paper.

  4. FLYCHK Collisional-Radiative Code

    Science.gov (United States)

    SRD 160 FLYCHK Collisional-Radiative Code (Web, free access)   FLYCHK provides a capability to generate atomic level populations and charge state distributions for low-Z to mid-Z elements under NLTE conditions.

  5. Turbo Codes with Hybrid Interleaving Mode

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In the investigation of turbo codes, either random interleavers or structured interleavers are used. Combined two kinds of interleavers in one turbo encoder, a hybrid interleaving mode is proposed in this paper. Computer simulations show that the performance of turbo codes with the hybrid interleaving mode is better than that with the typical interleaving mode.

  6. SKIRT: Hybrid parallelization of radiative transfer simulations

    Science.gov (United States)

    Verstocken, S.; Van De Putte, D.; Camps, P.; Baes, M.

    2017-07-01

    We describe the design, implementation and performance of the new hybrid parallelization scheme in our Monte Carlo radiative transfer code SKIRT, which has been used extensively for modelling the continuum radiation of dusty astrophysical systems including late-type galaxies and dusty tori. The hybrid scheme combines distributed memory parallelization, using the standard Message Passing Interface (MPI) to communicate between processes, and shared memory parallelization, providing multiple execution threads within each process to avoid duplication of data structures. The synchronization between multiple threads is accomplished through atomic operations without high-level locking (also called lock-free programming). This improves the scaling behaviour of the code and substantially simplifies the implementation of the hybrid scheme. The result is an extremely flexible solution that adjusts to the number of available nodes, processors and memory, and consequently performs well on a wide variety of computing architectures.

  7. Analysis of Non-binary Hybrid LDPC Codes

    CERN Document Server

    Sassatelli, Lucile

    2008-01-01

    In this paper, we analyse asymptotically a new class of LDPC codes called Non-binary Hybrid LDPC codes, which has been recently introduced. We use density evolution techniques to derive a stability condition for hybrid LDPC codes, and prove their threshold behavior. We study this stability condition to conclude on asymptotic advantages of hybrid LDPC codes compared to their non-hybrid counterparts.

  8. Hybrid coded aperture and Compton imaging using an active mask

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, L.J. [Los Alamos National Laboratory, Los Alamos, NM (United States)], E-mail: schultz@lanl.gov; Wallace, M.S.; Galassi, M.C.; Hoover, A.S.; Mocko, M.; Palmer, D.M.; Tornga, S.R.; Kippen, R.M. [Los Alamos National Laboratory, Los Alamos, NM (United States); Hynes, M.V.; Toolin, M.J.; Harris, B.; McElroy, J.E. [Raytheon Integrated Defense Systems, Tewksbury, MA (United States); Wakeford, D. [Bubble Technology Industries, Chalk River, Ontario (Canada); Lanza, R.C.; Horn, B.K.P. [Massachusetts Institute of Technology, Cambridge, MA (United States); Wehe, D.K. [University of Michigan, Ann Arbor, MI (United States)

    2009-09-11

    The trimodal imager (TMI) images gamma-ray sources from a mobile platform using both coded aperture (CA) and Compton imaging (CI) modalities. In this paper we will discuss development and performance of image reconstruction algorithms for the TMI. In order to develop algorithms in parallel with detector hardware we are using a GEANT4 [J. Allison, K. Amako, J. Apostolakis, H. Araujo, P.A. Dubois, M. Asai, G. Barrand, R. Capra, S. Chauvie, R. Chytracek, G. Cirrone, G. Cooperman, G. Cosmo, G. Cuttone, G. Daquino, et al., IEEE Trans. Nucl. Sci. NS-53 (1) (2006) 270] based simulation package to produce realistic data sets for code development. The simulation code incorporates detailed detector modeling, contributions from natural background radiation, and validation of simulation results against measured data. Maximum likelihood algorithms for both imaging methods are discussed, as well as a hybrid imaging algorithm wherein CA and CI information is fused to generate a higher fidelity reconstruction.

  9. Tests of Exoplanet Atmospheric Radiative Transfer Codes

    Science.gov (United States)

    Harrington, Joseph; Challener, Ryan; DeLarme, Emerson; Cubillos, Patricio; Blecic, Jasmina; Foster, Austin; Garland, Justin

    2016-10-01

    Atmospheric radiative transfer codes are used both to predict planetary spectra and in retrieval algorithms to interpret data. Observational plans, theoretical models, and scientific results thus depend on the correctness of these calculations. Yet, the calculations are complex and the codes implementing them are often written without modern software-verification techniques. In the process of writing our own code, we became aware of several others with artifacts of unknown origin and even outright errors in their spectra. We present a series of tests to verify atmospheric radiative-transfer codes. These include: simple, single-line line lists that, when combined with delta-function abundance profiles, should produce a broadened line that can be verified easily; isothermal atmospheres that should produce analytically-verifiable blackbody spectra at the input temperatures; and model atmospheres with a range of complexities that can be compared to the output of other codes. We apply the tests to our own code, Bayesian Atmospheric Radiative Transfer (BART) and to several other codes. The test suite is open-source software. We propose this test suite as a standard for verifying current and future radiative transfer codes, analogous to the Held-Suarez test for general circulation models. This work was supported by NASA Planetary Atmospheres grant NX12AI69G and NASA Astrophysics Data Analysis Program grant NNX13AF38G.

  10. Non-binary Hybrid LDPC Codes: Structure, Decoding and Optimization

    CERN Document Server

    Sassatelli, Lucile

    2007-01-01

    In this paper, we propose to study and optimize a very general class of LDPC codes whose variable nodes belong to finite sets with different orders. We named this class of codes Hybrid LDPC codes. Although efficient optimization techniques exist for binary LDPC codes and more recently for non-binary LDPC codes, they both exhibit drawbacks due to different reasons. Our goal is to capitalize on the advantages of both families by building codes with binary (or small finite set order) and non-binary parts in their factor graph representation. The class of Hybrid LDPC codes is obviously larger than existing types of codes, which gives more degrees of freedom to find good codes where the existing codes show their limits. We give two examples where hybrid LDPC codes show their interest.

  11. NASA Space Radiation Transport Code Development Consortium.

    Science.gov (United States)

    Townsend, Lawrence W

    2005-01-01

    Recently, NASA established a consortium involving the University of Tennessee (lead institution), the University of Houston, Roanoke College and various government and national laboratories, to accelerate the development of a standard set of radiation transport computer codes for NASA human exploration applications. This effort involves further improvements of the Monte Carlo codes HETC and FLUKA and the deterministic code HZETRN, including developing nuclear reaction databases necessary to extend the Monte Carlo codes to carry out heavy ion transport, and extending HZETRN to three dimensions. The improved codes will be validated by comparing predictions with measured laboratory transport data, provided by an experimental measurements consortium, and measurements in the upper atmosphere on the balloon-borne Deep Space Test Bed (DSTB). In this paper, we present an overview of the consortium members and the current status and future plans of consortium efforts to meet the research goals and objectives of this extensive undertaking.

  12. The RAGE radiation-hydrodynamic code

    CERN Document Server

    Gittings, Michael; Clover, Michael; Betlach, Thomas; Byrne, Nelson; Coker, Robert; Dendy, Edward; Hueckstaedt, Robert; New, Kim; Oakes, W Rob; Ranta, Dale; Stefan, Ryan

    2008-01-01

    We describe RAGE, the ``Radiation Adaptive Grid Eulerian'' radiation-hydrodynamics code, including its data structures, its parallelization strategy and performance, its hydrodynamic algorithm(s), its (gray) radiation diffusion algorithm, and some of the considerable amount of verification and validation efforts. The hydrodynamics is a basic Godunov solver, to which we have made significant improvements to increase the advection algorithm's robustness and to converge stiffnesses in the equation of state. Similarly, the radiation transport is a basic gray diffusion, but our treatment of the radiation-material coupling, wherein we converge nonlinearities in a novel manner to allow larger timesteps and more robust behavior, can be applied to any multi-group transport algorithm.

  13. Radiation hydrodynamics integrated in the PLUTO code

    Science.gov (United States)

    Kolb, Stefan M.; Stute, Matthias; Kley, Wilhelm; Mignone, Andrea

    2013-11-01

    Aims: The transport of energy through radiation is very important in many astrophysical phenomena. In dynamical problems the time-dependent equations of radiation hydrodynamics have to be solved. We present a newly developed radiation-hydrodynamics module specifically designed for the versatile magnetohydrodynamic (MHD) code PLUTO. Methods: The solver is based on the flux-limited diffusion approximation in the two-temperature approach. All equations are solved in the co-moving frame in the frequency-independent (gray) approximation. The hydrodynamics is solved by the different Godunov schemes implemented in PLUTO, and for the radiation transport we use a fully implicit scheme. The resulting system of linear equations is solved either using the successive over-relaxation (SOR) method (for testing purposes) or using matrix solvers that are available in the PETSc library. We state in detail the methodology and describe several test cases to verify the correctness of our implementation. The solver works in standard coordinate systems, such as Cartesian, cylindrical, and spherical, and also for non-equidistant grids. Results: We present a new radiation-hydrodynamics solver coupled to the MHD-code PLUTO that is a modern, versatile, and efficient new module for treating complex radiation hydrodynamical problems in astrophysics. As test cases, either purely radiative situations, or full radiation-hydrodynamical setups (including radiative shocks and convection in accretion disks) were successfully studied. The new module scales very well on parallel computers using MPI. For problems in star or planet formation, we added the possibility of irradiation by a central source.

  14. Evaluation of coded aperture radiation detectors using a Bayesian approach

    Science.gov (United States)

    Miller, Kyle; Huggins, Peter; Labov, Simon; Nelson, Karl; Dubrawski, Artur

    2016-12-01

    We investigate tradeoffs arising from the use of coded aperture gamma-ray spectrometry to detect and localize sources of harmful radiation in the presence of noisy background. Using an example application scenario of area monitoring and search, we empirically evaluate weakly supervised spectral, spatial, and hybrid spatio-spectral algorithms for scoring individual observations, and two alternative methods of fusing evidence obtained from multiple observations. Results of our experiments confirm the intuition that directional information provided by spectrometers masked with coded aperture enables gains in source localization accuracy, but at the expense of reduced probability of detection. Losses in detection performance can however be to a substantial extent reclaimed by using our new spatial and spatio-spectral scoring methods which rely on realistic assumptions regarding masking and its impact on measured photon distributions.

  15. Computer code for intraply hybrid composite design

    Science.gov (United States)

    Chamis, C. C.; Sinclair, J. H.

    1981-01-01

    A computer program has been developed and is described herein for intraply hybrid composite design (INHYD). The program includes several composite micromechanics theories, intraply hybrid composite theories and a hygrothermomechanical theory. These theories provide INHYD with considerable flexibility and capability which the user can exercise through several available options. Key features and capabilities of INHYD are illustrated through selected samples.

  16. THE MCNPX MONTE CARLO RADIATION TRANSPORT CODE

    Energy Technology Data Exchange (ETDEWEB)

    WATERS, LAURIE S. [Los Alamos National Laboratory; MCKINNEY, GREGG W. [Los Alamos National Laboratory; DURKEE, JOE W. [Los Alamos National Laboratory; FENSIN, MICHAEL L. [Los Alamos National Laboratory; JAMES, MICHAEL R. [Los Alamos National Laboratory; JOHNS, RUSSELL C. [Los Alamos National Laboratory; PELOWITZ, DENISE B. [Los Alamos National Laboratory

    2007-01-10

    MCNPX (Monte Carlo N-Particle eXtended) is a general-purpose Monte Carlo radiation transport code with three-dimensional geometry and continuous-energy transport of 34 particles and light ions. It contains flexible source and tally options, interactive graphics, and support for both sequential and multi-processing computer platforms. MCNPX is based on MCNP4B, and has been upgraded to most MCNP5 capabilities. MCNP is a highly stable code tracking neutrons, photons and electrons, and using evaluated nuclear data libraries for low-energy interaction probabilities. MCNPX has extended this base to a comprehensive set of particles and light ions, with heavy ion transport in development. Models have been included to calculate interaction probabilities when libraries are not available. Recent additions focus on the time evolution of residual nuclei decay, allowing calculation of transmutation and delayed particle emission. MCNPX is now a code of great dynamic range, and the excellent neutronics capabilities allow new opportunities to simulate devices of interest to experimental particle physics; particularly calorimetry. This paper describes the capabilities of the current MCNPX version 2.6.C, and also discusses ongoing code development.

  17. 3D unstructured-mesh radiation transport codes

    Energy Technology Data Exchange (ETDEWEB)

    Morel, J. [Los Alamos National Lab., NM (United States)

    1997-12-31

    Three unstructured-mesh radiation transport codes are currently being developed at Los Alamos National Laboratory. The first code is ATTILA, which uses an unstructured tetrahedral mesh in conjunction with standard Sn (discrete-ordinates) angular discretization, standard multigroup energy discretization, and linear-discontinuous spatial differencing. ATTILA solves the standard first-order form of the transport equation using source iteration in conjunction with diffusion-synthetic acceleration of the within-group source iterations. DANTE is designed to run primarily on workstations. The second code is DANTE, which uses a hybrid finite-element mesh consisting of arbitrary combinations of hexahedra, wedges, pyramids, and tetrahedra. DANTE solves several second-order self-adjoint forms of the transport equation including the even-parity equation, the odd-parity equation, and a new equation called the self-adjoint angular flux equation. DANTE also offers three angular discretization options: $S{_}n$ (discrete-ordinates), $P{_}n$ (spherical harmonics), and $SP{_}n$ (simplified spherical harmonics). DANTE is designed to run primarily on massively parallel message-passing machines, such as the ASCI-Blue machines at LANL and LLNL. The third code is PERICLES, which uses the same hybrid finite-element mesh as DANTE, but solves the standard first-order form of the transport equation rather than a second-order self-adjoint form. DANTE uses a standard $S{_}n$ discretization in angle in conjunction with trilinear-discontinuous spatial differencing, and diffusion-synthetic acceleration of the within-group source iterations. PERICLES was initially designed to run on workstations, but a version for massively parallel message-passing machines will be built. The three codes will be described in detail and computational results will be presented.

  18. Hybrid Coding of Image Sequences by Using Wavelet Transform

    Directory of Open Access Journals (Sweden)

    M. Surin

    2000-04-01

    Full Text Available In this paper, a new method of hybrid coding of image sequences byusing wavelet transform is proposed. The basic MPEG scheme with DCT hasbeen modificated in sense of replacement DCT by wavelet transform. Inthe proposed method, the motion estimation and compensation are usedfor motion vectors calculation and different frame between currentframe and compensated frame is coded by using wavelet transform. Someexperimental results of image sequences coding by using a new methodare presented.

  19. Hybrid anode for semiconductor radiation detectors

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ge; Bolotnikov, Aleksey E; Camarda, Guiseppe; Cui, Yonggang; Hossain, Anwar; Kim, Ki Hyun; James, Ralph B

    2013-11-19

    The present invention relates to a novel hybrid anode configuration for a radiation detector that effectively reduces the edge effect of surface defects on the internal electric field in compound semiconductor detectors by focusing the internal electric field of the detector and redirecting drifting carriers away from the side surfaces of the semiconductor toward the collection electrode(s).

  20. Charmonium meson and hybrid radiative transitions

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Peng [Indiana U., JLAB; Yépez-Martínez, Tochtli [Indiana U.; Szczepaniak, Adam P. [Indiana U., JLAB

    2014-06-01

    We consider the non-relativistic limit of the QCD Hamiltonian in the Coulomb gauge, to describe radiative transitions between conventional charmonium states and from the lowest multiplet of cc¯ hybrids to charmonium mesons. The results are compared to potential quark models and lattices calculations.

  1. Advances in space radiation shielding codes

    Science.gov (United States)

    Wilson, John W.; Tripathi, Ram K.; Qualls, Garry D.; Cucinotta, Francis A.; Prael, Richard E.; Norbury, John W.; Heinbockel, John H.; Tweed, John; De Angelis, Giovanni

    2002-01-01

    Early space radiation shield code development relied on Monte Carlo methods and made important contributions to the space program. Monte Carlo methods have resorted to restricted one-dimensional problems leading to imperfect representation of appropriate boundary conditions. Even so, intensive computational requirements resulted and shield evaluation was made near the end of the design process. Resolving shielding issues usually had a negative impact on the design. Improved spacecraft shield design requires early entry of radiation constraints into the design process to maximize performance and minimize costs. As a result, we have been investigating high-speed computational procedures to allow shield analysis from the preliminary concept to the final design. For the last few decades, we have pursued deterministic solutions of the Boltzmann equation allowing field mapping within the International Space Station (ISS) in tens of minutes using standard Finite Element Method (FEM) geometry common to engineering design methods. A single ray trace in such geometry requires 14 milliseconds and limits application of Monte Carlo methods to such engineering models. A potential means of improving the Monte Carlo efficiency in coupling to spacecraft geometry is given.

  2. A HYDROCHEMICAL HYBRID CODE FOR ASTROPHYSICAL PROBLEMS. I. CODE VERIFICATION AND BENCHMARKS FOR A PHOTON-DOMINATED REGION (PDR)

    Energy Technology Data Exchange (ETDEWEB)

    Motoyama, Kazutaka [National Institute of Informatics, 2-1-2 Hitotsubashi, Chiyoda-ku, Tokyo 101-8430 (Japan); Morata, Oscar; Hasegawa, Tatsuhiko [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China); Shang, Hsien; Krasnopolsky, Ruben, E-mail: shang@asiaa.sinica.edu.tw [Theoretical Institute for Advanced Research in Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China)

    2015-07-20

    A two-dimensional hydrochemical hybrid code, KM2, is constructed to deal with astrophysical problems that would require coupled hydrodynamical and chemical evolution. The code assumes axisymmetry in a cylindrical coordinate system and consists of two modules: a hydrodynamics module and a chemistry module. The hydrodynamics module solves hydrodynamics using a Godunov-type finite volume scheme and treats included chemical species as passively advected scalars. The chemistry module implicitly solves nonequilibrium chemistry and change of energy due to thermal processes with transfer of external ultraviolet radiation. Self-shielding effects on photodissociation of CO and H{sub 2} are included. In this introductory paper, the adopted numerical method is presented, along with code verifications using the hydrodynamics module and a benchmark on the chemistry module with reactions specific to a photon-dominated region (PDR). Finally, as an example of the expected capability, the hydrochemical evolution of a PDR is presented based on the PDR benchmark.

  3. A Hydrochemical Hybrid Code for Astrophysical Problems. I. Code Verification and Benchmarks for Photon-Dominated Region (PDR)

    CERN Document Server

    Motoyama, Kazutaka; Shang, Hsien; Krasnopolsky, Ruben; Hasegawa, Tatsuhiko

    2015-01-01

    A two dimensional hydrochemical hybrid code, KM2, is constructed to deal with astrophysical problems that would require coupled hydrodynamical and chemical evolution. The code assumes axisymmetry in cylindrical coordinate system, and consists of two modules: a hydrodynamics module and a chemistry module. The hydrodynamics module solves hydrodynamics using a Godunov-type finite volume scheme and treats included chemical species as passively advected scalars. The chemistry module implicitly solves non-equilibrium chemistry and change of the energy due to thermal processes with transfer of external ultraviolet radiation. Self-shielding effects on photodissociation of CO and H$_2$ are included. In this introductory paper, the adopted numerical method is presented, along with code verifications using the hydrodynamics modules, and a benchmark on the chemistry module with reactions specific to a photon-dominated region (PDR). Finally, as an example of the expected capability, the hydrochemical evolution of a PDR is...

  4. Hybrid Compton camera/coded aperture imaging system

    Science.gov (United States)

    Mihailescu, Lucian [Livermore, CA; Vetter, Kai M [Alameda, CA

    2012-04-10

    A system in one embodiment includes an array of radiation detectors; and an array of imagers positioned behind the array of detectors relative to an expected trajectory of incoming radiation. A method in another embodiment includes detecting incoming radiation with an array of radiation detectors; detecting the incoming radiation with an array of imagers positioned behind the array of detectors relative to a trajectory of the incoming radiation; and performing at least one of Compton imaging using at least the imagers and coded aperture imaging using at least the imagers. A method in yet another embodiment includes detecting incoming radiation with an array of imagers positioned behind an array of detectors relative to a trajectory of the incoming radiation; and performing Compton imaging using at least the imagers.

  5. Calculation codes in radiation protection, radiation physics and dosimetry; Codes de calcul en radioprotection, radiophysique et dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    These scientific days had for objective to draw up the situation of calculation codes of radiation transport, of sources estimation, of radiation doses managements and to draw the future perspectives. (N.C.)

  6. Description of Transport Codes for Space Radiation Shielding

    Science.gov (United States)

    Kim, Myung-Hee Y.; Wilson, John W.; Cucinotta, Francis A.

    2011-01-01

    This slide presentation describes transport codes and their use for studying and designing space radiation shielding. When combined with risk projection models radiation transport codes serve as the main tool for study radiation and designing shielding. There are three criteria for assessing the accuracy of transport codes: (1) Ground-based studies with defined beams and material layouts, (2) Inter-comparison of transport code results for matched boundary conditions and (3) Comparisons to flight measurements. These three criteria have a very high degree with NASA's HZETRN/QMSFRG.

  7. A New Efficient Hybrid Coding For Progressive Transmission Of Images

    Science.gov (United States)

    Akansu, Ali N.; Haddad, Richard A.

    1988-10-01

    The hybrid coding technique developed here involves a function of two concepts: progressive interactive image transmission coupled with transform differential coding. There are two notable features in this approach. First, a local average of an mxm (typically 5 x 5) pixel array is formed, quantized and transmitted to the receiver for a preliminary display. This initial pass provides a crude but recognizable image before any further processing or encoding. Upon request from the receiver, the technique then switches to an iterative transform differential encoding scheme. Each iteration progressively provides more image detail at the receiver as requested. Secondly, this hybrid coding technique uses a computationally efficient, real, orthogonal transform, called the Modified Hermite Transform(MHT) [1], to encode the difference image. This MHT is then compared with the Discrete Cosine Transform(DCT) [2] for the same hybrid algorithm. For the standard images tested, we found that the progressive differential coding method per-forms comparably to the well-known direct transform coding methods. The DCT was used as the standard in this traditional approach. This hybrid technique was within 5% of SNR peak-to-peak for the "LENA" image. Comparisons between MHT and DCT as the transform vehicle for the hybrid technique were also conducted. For a transform block size N=8, the DCT requires 50% more multiplications than the MHT. The price paid for this efficiency is modest. For the example tested ("LENA"), the DCT performance gain was 4.2 dB while the MHT was 3.8 dB.

  8. Multiview coding mode decision with hybrid optimal stopping model.

    Science.gov (United States)

    Zhao, Tiesong; Kwong, Sam; Wang, Hanli; Wang, Zhou; Pan, Zhaoqing; Kuo, C-C Jay

    2013-04-01

    In a generic decision process, optimal stopping theory aims to achieve a good tradeoff between decision performance and time consumed, with the advantages of theoretical decision-making and predictable decision performance. In this paper, optimal stopping theory is employed to develop an effective hybrid model for the mode decision problem, which aims to theoretically achieve a good tradeoff between the two interrelated measurements in mode decision, as computational complexity reduction and rate-distortion degradation. The proposed hybrid model is implemented and examined with a multiview encoder. To support the model and further promote coding performance, the multiview coding mode characteristics, including predicted mode probability and estimated coding time, are jointly investigated with inter-view correlations. Exhaustive experimental results with a wide range of video resolutions reveal the efficiency and robustness of our method, with high decision accuracy, negligible computational overhead, and almost intact rate-distortion performance compared to the original encoder.

  9. A particle-based hybrid code for planet formation

    CERN Document Server

    Morishima, Ryuji

    2015-01-01

    We introduce a new particle-based hybrid code for planetary accretion. The code uses an $N$-body routine for interactions with planetary embryos while it can handle a large number of planetesimals using a super-particle approximation, in which a large number of small planetesimals are represented by a small number of tracers. Tracer-tracer interactions are handled by a statistical routine which uses the phase-averaged stirring and collision rates. We compare hybrid simulations with analytic predictions and pure $N$-body simulations for various problems in detail and find good agreements for all cases. The computational load on the portion of the statistical routine is comparable to or less than that for the $N$-body routine. The present code includes an option of hit-and-run bouncing but not fragmentation, which remains for future work.

  10. Adaptation of radiation shielding code to space environment

    Energy Technology Data Exchange (ETDEWEB)

    Okuno, Koichi; Hara, Akihisa (Hazama Corp., Tokyo (Japan))

    1992-12-01

    Recently, the trend to the development of space has heightened. To the development of space, many problems are related, and as one of them, there is the protection from cosmic ray. The cosmic ray is the radiation having ultrahigh energy, and there was not the radiation shielding design code that copes with cosmic ray so far. Therefore, the high energy radiation shielding design code for accelerators was improved so as to cope with the peculiarity that cosmic ray possesses. Moreover, the calculation of the radiation dose equivalent rate in the moon base to which the countermeasures against cosmic ray were taken was simulated by using the improved code. As the important countermeasures for the safety protection from radiation, the covering with regolith is carried out, and the effect of regolith was confirmed by using the improved code. Galactic cosmic ray, solar flare particles, radiation belt, the adaptation of the radiation shielding code HERMES to space environment, the improvement of the three-dimensional hadron cascade code HETCKFA-2 and the electromagnetic cascade code EGS 4-KFA, and the cosmic ray simulation are reported. (K.I.).

  11. Multiuser Cooperation with Hybrid Network Coding in Wireless Networks

    Directory of Open Access Journals (Sweden)

    G. Wang

    2014-04-01

    Full Text Available In this paper a hybrid Network Coding Cooperation (hybrid-NCC system is proposed to achieve both reliable transmission and high throughput in wireless networks. To balance the transmission reliability with throughput, the users are divided into cooperative sub-networks based on the geographical information, and the cooperation is implemented in each sub-network. After receiving signals from the cooperative partners, each user encodes them by exploiting hybrid network coding and then forwards the recoded symbols via the Link-Adaptive Regenerative (LAR relaying. First, the Diversity-Multiplexing Tradeoff (DMT is analyzed to demonstrate that the proposed system is bandwidth-efficient. Second, the Symbol Error Probability (SEP is also derived, which shows that the proposed system achieves a higher reliability as compared to the traditional Complex Field Network Coding Cooperation (CFNCC. Moreover, because dedicated relays are not required, our proposed system can both reduce the costs and enhance the flexibility of the implementation. Finally, the analytical results are supported and validated by numerical simulations.

  12. The hybrid opacity code SCO-RCG: recent developments

    CERN Document Server

    Pain, Jean-Christophe; Porcherot, Quentin; Blenski, Thomas

    2013-01-01

    Absorption and emission spectra of multicharged-ion plasmas contain a huge number of electron configurations and electric-dipolar lines, which can be handled by global methods. However, some transition arrays consist only of a small bunch of lines. For that reason, we developed the hybrid opacity code SCO-RCG combining the (statistical) super-transition-array method and the (detailed) fine-structure calculation (requiring the diagonalization of the Hamiltonian matrix) of atomic structure. In order to decide whether a detailed treatment of lines is necessary and to determine the validity of statistical methods, the code involves criteria taking into account coalescence of lines and porosity (localized absence of lines) in transition arrays. Data required for the calculation of detailed transition arrays (Slater, spin-orbit and dipolar integrals) are provided by the super-configuration code SCO, which takes into account plasma screening effects on wavefunctions. Then, level energies and lines are calculated by ...

  13. Analysis of extensive air showers with the hybrid code SENECA

    CERN Document Server

    Ortiz, J A; Medina-Tanco, G; Ortiz, Jeferson A.; Souza, Vitor de; Medina-Tanco, Gustavo

    2005-01-01

    The ultrahigh energy tail of the cosmic ray spectrum has been explored with unprecedented detail. For this reason, new experiments are exerting a severe pressure on extensive air shower modeling. Detailed fast codes are in need in order to extract and understand the richness of information now available. In this sense we explore the potential of SENECA, an efficient hybrid tridimensional simulation code, as a valid practical alternative to full Monte Carlo simulations of extensive air showers generated by ultrahigh energy cosmic rays. We discuss the influence of this approach on the main longitudinal characteristics of proton, iron nucleus and gamma induced air showers for different hadronic interaction models. We also show the comparisons of our predictions with those of CORSIKA code.

  14. Analysis of extensive air showers with the hybrid code SENECA

    Science.gov (United States)

    Ortiz, Jeferson A.; de Souza, Vitor; Medina-Tanco, Gustavo

    The ultrahigh energy tail of the cosmic ray spectrum has been explored with unprecedented detail. For this reason, new experiments are exerting a severe pressure on extensive air shower modeling. Detailed fast codes are in need in order to extract and understand the richness of information now available. In this sense we explore the potential of SENECA, an efficient hybrid tridimensional simulation code, as a valid practical alternative to full Monte Carlo simulations of extensive air showers generated by ultrahigh energy cosmic rays. We discuss the influence of this approach on the main longitudinal characteristics of proton, iron nucleus and gamma induced air showers for different hadronic interaction models. We also show the comparisons of our predictions with those of CORSIKA code.

  15. Morse Monte Carlo Radiation Transport Code System

    Energy Technology Data Exchange (ETDEWEB)

    Emmett, M.B.

    1975-02-01

    The report contains sections containing descriptions of the MORSE and PICTURE codes, input descriptions, sample problems, deviations of the physical equations and explanations of the various error messages. The MORSE code is a multipurpose neutron and gamma-ray transport Monte Carlo code. Time dependence for both shielding and criticality problems is provided. General three-dimensional geometry may be used with an albedo option available at any material surface. The PICTURE code provide aid in preparing correct input data for the combinatorial geometry package CG. It provides a printed view of arbitrary two-dimensional slices through the geometry. By inspecting these pictures one may determine if the geometry specified by the input cards is indeed the desired geometry. 23 refs. (WRF)

  16. Radiation Hardened Turbo Coded OFDM Modulator Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Space Micro Inc. proposes to develop an innovative Turbo-Coded Orthogonal Frequency Division Modulation (TC-OFDM) ASIC device. The proposed device provides data...

  17. Recent developments in the Los Alamos radiation transport code system

    Energy Technology Data Exchange (ETDEWEB)

    Forster, R.A.; Parsons, K. [Los Alamos National Lab., NM (United States)

    1997-06-01

    A brief progress report on updates to the Los Alamos Radiation Transport Code System (LARTCS) for solving criticality and fixed-source problems is provided. LARTCS integrates the Diffusion Accelerated Neutral Transport (DANT) discrete ordinates codes with the Monte Carlo N-Particle (MCNP) code. The LARCTS code is being developed with a graphical user interface for problem setup and analysis. Progress in the DANT system for criticality applications include a two-dimensional module which can be linked to a mesh-generation code and a faster iteration scheme. Updates to MCNP Version 4A allow statistical checks of calculated Monte Carlo results.

  18. A general hybrid radiation transport scheme for star formation simulations on an adaptive grid

    CERN Document Server

    Klassen, Mikhail; Pudritz, Ralph E; Peters, Thomas; Banerjee, Robi; Buntemeyer, Lars

    2014-01-01

    Radiation feedback plays a crucial role in the process of star formation. In order to simulate the thermodynamic evolution of disks, filaments, and the molecular gas surrounding clusters of young stars, we require an efficient and accurate method for solving the radiation transfer problem. We describe the implementation of a hybrid radiation transport scheme in the adaptive grid-based FLASH general magnetohydrodynamics code. The hybrid scheme splits the radiative transport problem into a raytracing step and a diffusion step. The raytracer captures the first absorption event, as stars irradiate their environments, while the evolution of the diffuse component of the radiation field is handled by a flux-limited diffusion (FLD) solver. We demonstrate the accuracy of our method through a variety of benchmark tests including the irradiation of a static disk, subcritical and supercritical radiative shocks, and thermal energy equilibration. We also demonstrate the capability of our method for casting shadows and calc...

  19. Radiation-emitting Electronic Product Codes

    Data.gov (United States)

    U.S. Department of Health & Human Services — This database contains product names and associated information developed by the Center for all products, both medical and non-medical, which emit radiation. It...

  20. Overview of HZETRN and BRNTRN Space Radiation Shielding Codes

    Science.gov (United States)

    Wilson, John W.; Cucinotta, F. A.; Shinn, J. L.; Simonsen, L. C.; Badavi, F. F.

    1997-01-01

    The NASA Radiation Health Program has supported basic research over the last decade in radiation physics to develop ionizing radiation transport codes and corresponding data bases for the protection of astronauts from galactic and solar cosmic rays on future deep space missions. The codes describe the interactions of the incident radiations with shield materials where their content is modified by the atomic and nuclear reactions through which high energy heavy ions are fragmented into less massive reaction products and reaction products are produced as radiations as direct knockout of shield constituents or produced as de-excitation products in the reactions. This defines the radiation fields to which specific devices are subjected onboard a spacecraft. Similar reactions occur in the device itself which is the initiating event for the device response. An overview of the computational procedures and data base with some applications to photonic and data processing devices will be given.

  1. Analysis of SMA Hybrid Composite Structures using Commercial Codes

    Science.gov (United States)

    Turner, Travis L.; Patel, Hemant D.

    2004-01-01

    A thermomechanical model for shape memory alloy (SMA) actuators and SMA hybrid composite (SMAHC) structures has been recently implemented in the commercial finite element codes MSC.Nastran and ABAQUS. The model may be easily implemented in any code that has the capability for analysis of laminated composite structures with temperature dependent material properties. The model is also relatively easy to use and requires input of only fundamental engineering properties. A brief description of the model is presented, followed by discussion of implementation and usage in the commercial codes. Results are presented from static and dynamic analysis of SMAHC beams of two types; a beam clamped at each end and a cantilevered beam. Nonlinear static (post-buckling) and random response analyses are demonstrated for the first specimen. Static deflection (shape) control is demonstrated for the cantilevered beam. Approaches for modeling SMAHC material systems with embedded SMA in ribbon and small round wire product forms are demonstrated and compared. The results from the commercial codes are compared to those from a research code as validation of the commercial implementations; excellent correlation is achieved in all cases.

  2. SPAMCART: a code for smoothed particle Monte Carlo radiative transfer

    Science.gov (United States)

    Lomax, O.; Whitworth, A. P.

    2016-10-01

    We present a code for generating synthetic spectral energy distributions and intensity maps from smoothed particle hydrodynamics simulation snapshots. The code is based on the Lucy Monte Carlo radiative transfer method, i.e. it follows discrete luminosity packets as they propagate through a density field, and then uses their trajectories to compute the radiative equilibrium temperature of the ambient dust. The sources can be extended and/or embedded, and discrete and/or diffuse. The density is not mapped on to a grid, and therefore the calculation is performed at exactly the same resolution as the hydrodynamics. We present two example calculations using this method. First, we demonstrate that the code strictly adheres to Kirchhoff's law of radiation. Secondly, we present synthetic intensity maps and spectra of an embedded protostellar multiple system. The algorithm uses data structures that are already constructed for other purposes in modern particle codes. It is therefore relatively simple to implement.

  3. SPAMCART: a code for smoothed particle Monte Carlo radiative transfer

    CERN Document Server

    Lomax, O

    2016-01-01

    We present a code for generating synthetic SEDs and intensity maps from Smoothed Particle Hydrodynamics simulation snapshots. The code is based on the Lucy (1999) Monte Carlo Radiative Transfer method, i.e. it follows discrete luminosity packets, emitted from external and/or embedded sources, as they propagate through a density field, and then uses their trajectories to compute the radiative equilibrium temperature of the ambient dust. The density is not mapped onto a grid, and therefore the calculation is performed at exactly the same resolution as the hydrodynamics. We present two example calculations using this method. First, we demonstrate that the code strictly adheres to Kirchhoff's law of radiation. Second, we present synthetic intensity maps and spectra of an embedded protostellar multiple system. The algorithm uses data structures that are already constructed for other purposes in modern particle codes. It is therefore relatively simple to implement.

  4. Development of a predictive code for aircrew radiation exposure (PCAIRE)

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, B.J.; Bennett, L.G.I.; Green, A.R.; McCall, M.J.; Ellaschuk, B.; Pierre, M.; Butler, A.; Desormeaux, M. [Royal Military College of Canada, Dept. of Chemistry and Chemical Engineering, Kingston, Ontario (Canada)

    2003-07-01

    Jet aircrew are routinely exposed to levels of natural background radiation (i.e., galactic cosmic radiation) that are significantly higher than those present at ground level. This paper describes the method of collecting and analyzing radiation data from numerous worldwide flights, and the encapsulation of these results into a computer code (PCAIRE) for the prediction of the aircrew radiation exposure on any flight in the world at any period in the solar cycle. Predictions from the PCAIRE code were then compared to integral doses measured at commercial altitudes during experimental flights made by various research groups over the past five years over the given solar cycle. In general, the code predictions are in agreement with the measured data within {+-} 20%. An additional correlation has been developed for estimation of aircrew exposure resulting from solar particle events. (author)

  5. The Continual Intercomparison of Radiation Codes: Results from Phase I

    Science.gov (United States)

    Oreopoulos, Lazaros; Mlawer, Eli; Delamere, Jennifer; Shippert, Timothy; Cole, Jason; Iacono, Michael; Jin, Zhonghai; Li, Jiangnan; Manners, James; Raisanen, Petri; Rose, Fred; Zhang, Yuanchong; Wilson Michael J.; Rossow, William

    2011-01-01

    The computer codes that calculate the energy budget of solar and thermal radiation in Global Climate Models (GCMs), our most advanced tools for predicting climate change, have to be computationally efficient in order to not impose undue computational burden to climate simulations. By using approximations to gain execution speed, these codes sacrifice accuracy compared to more accurate, but also much slower, alternatives. International efforts to evaluate the approximate schemes have taken place in the past, but they have suffered from the drawback that the accurate standards were not validated themselves for performance. The manuscript summarizes the main results of the first phase of an effort called "Continual Intercomparison of Radiation Codes" (CIRC) where the cases chosen to evaluate the approximate models are based on observations and where we have ensured that the accurate models perform well when compared to solar and thermal radiation measurements. The effort is endorsed by international organizations such as the GEWEX Radiation Panel and the International Radiation Commission and has a dedicated website (i.e., http://circ.gsfc.nasa.gov) where interested scientists can freely download data and obtain more information about the effort's modus operandi and objectives. In a paper published in the March 2010 issue of the Bulletin of the American Meteorological Society only a brief overview of CIRC was provided with some sample results. In this paper the analysis of submissions of 11 solar and 13 thermal infrared codes relative to accurate reference calculations obtained by so-called "line-by-line" radiation codes is much more detailed. We demonstrate that, while performance of the approximate codes continues to improve, significant issues still remain to be addressed for satisfactory performance within GCMs. We hope that by identifying and quantifying shortcomings, the paper will help establish performance standards to objectively assess radiation code quality

  6. Spectral Shape of Check-Hybrid GLDPC Codes

    CERN Document Server

    Paolini, Enrico; Chiani, Marco; Fossorier, Marc P C

    2010-01-01

    This paper analyzes the asymptotic exponent of both the weight spectrum and the stopping set size spectrum for a class of generalized low-density parity-check (GLDPC) codes. Specifically, all variable nodes (VNs) are assumed to have the same degree (regular VN set), while the check node (CN) set is assumed to be composed of a mixture of different linear block codes (hybrid CN set). A simple expression for the exponent (which is also referred to as the growth rate or the spectral shape) is developed. This expression is consistent with previous results, including the case where the normalized weight or stopping set size tends to zero. Furthermore, it is shown how certain symmetry properties of the local weight distribution at the CNs induce a symmetry in the overall weight spectral shape function.

  7. A Radiation Shielding Code for Spacecraft and Its Validation

    Science.gov (United States)

    Shinn, J. L.; Cucinotta, F. A.; Singleterry, R. C.; Wilson, J. W.; Badavi, F. F.; Badhwar, G. D.; Miller, J.; Zeitlin, C.; Heilbronn, L.; Tripathi, R. K.

    2000-01-01

    The HZETRN code, which uses a deterministic approach pioneered at NASA Langley Research Center, has been developed over the past decade to evaluate the local radiation fields within sensitive materials (electronic devices and human tissue) on spacecraft in the space environment. The code describes the interactions of shield materials with the incident galactic cosmic rays, trapped protons, or energetic protons from solar particle events in free space and low Earth orbit. The content of incident radiations is modified by atomic and nuclear reactions with the spacecraft and radiation shield materials. High-energy heavy ions are fragmented into less massive reaction products, and reaction products are produced by direct knockout of shield constituents or from de-excitation products. An overview of the computational procedures and database which describe these interactions is given. Validation of the code with recent Monte Carlo benchmarks, and laboratory and flight measurement is also included.

  8. Controlling Energy Radiations of Electromagnetic Waves via Frequency Coding Metamaterials.

    Science.gov (United States)

    Wu, Haotian; Liu, Shuo; Wan, Xiang; Zhang, Lei; Wang, Dan; Li, Lianlin; Cui, Tie Jun

    2017-09-01

    Metamaterials are artificial structures composed of subwavelength unit cells to control electromagnetic (EM) waves. The spatial coding representation of metamaterial has the ability to describe the material in a digital way. The spatial coding metamaterials are typically constructed by unit cells that have similar shapes with fixed functionality. Here, the concept of frequency coding metamaterial is proposed, which achieves different controls of EM energy radiations with a fixed spatial coding pattern when the frequency changes. In this case, not only different phase responses of the unit cells are considered, but also different phase sensitivities are also required. Due to different frequency sensitivities of unit cells, two units with the same phase response at the initial frequency may have different phase responses at higher frequency. To describe the frequency coding property of unit cell, digitalized frequency sensitivity is proposed, in which the units are encoded with digits "0" and "1" to represent the low and high phase sensitivities, respectively. By this merit, two degrees of freedom, spatial coding and frequency coding, are obtained to control the EM energy radiations by a new class of frequency-spatial coding metamaterials. The above concepts and physical phenomena are confirmed by numerical simulations and experiments.

  9. A comparison between the Monte Carlo radiation transport codes MCNP and MCBEND

    Energy Technology Data Exchange (ETDEWEB)

    Sawamura, Hidenori; Nishimura, Kazuya [Computer Software Development Co., Ltd., Tokyo (Japan)

    2001-01-01

    In Japan, almost of all radiation analysts are using the MCNP code and MVP code on there studies. But these codes have not had automatic variance reduction. MCBEND code made by UKAEA have automatic variance reduction. And, MCBEND code is user friendly more than other Monte Carlo Radiation Transport Codes. Our company was first introduced MCBEND code in Japan. Therefore, we compared with MCBEND code and MCNP code about functions and production capacity. (author)

  10. Computational hybrid anthropometric paediatric phantom library for internal radiation dosimetry

    Science.gov (United States)

    Xie, Tianwu; Kuster, Niels; Zaidi, Habib

    2017-04-01

    Hybrid computational phantoms combine voxel-based and simplified equation-based modelling approaches to provide unique advantages and more realism for the construction of anthropomorphic models. In this work, a methodology and C++ code are developed to generate hybrid computational phantoms covering statistical distributions of body morphometry in the paediatric population. The paediatric phantoms of the Virtual Population Series (IT’IS Foundation, Switzerland) were modified to match target anthropometric parameters, including body mass, body length, standing height and sitting height/stature ratio, determined from reference databases of the National Centre for Health Statistics and the National Health and Nutrition Examination Survey. The phantoms were selected as representative anchor phantoms for the newborn, 1, 2, 5, 10 and 15 years-old children, and were subsequently remodelled to create 1100 female and male phantoms with 10th, 25th, 50th, 75th and 90th body morphometries. Evaluation was performed qualitatively using 3D visualization and quantitatively by analysing internal organ masses. Overall, the newly generated phantoms appear very reasonable and representative of the main characteristics of the paediatric population at various ages and for different genders, body sizes and sitting stature ratios. The mass of internal organs increases with height and body mass. The comparison of organ masses of the heart, kidney, liver, lung and spleen with published autopsy and ICRP reference data for children demonstrated that they follow the same trend when correlated with age. The constructed hybrid computational phantom library opens up the prospect of comprehensive radiation dosimetry calculations and risk assessment for the paediatric population of different age groups and diverse anthropometric parameters.

  11. The Continual Intercomparison of Radiation Codes: Results from Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Oreopoulos, L.; Mlawer, Eli J.; Delamere, Jennifer; Shippert, Timothy R.; Cole, Jason; Fomin, Boris; Iacono, Michael J.; Jin, Zhonghai; Li, Jiangning; Manners, James; Raisanen, Petri; Rose, Fred; Zhang, Yuanchong; Wilson, Michael J.; Rossow, William B.

    2012-01-01

    We present results from Phase I of the Continual Intercomparison of Radiation Codes (CIRC), intended as an evolving and regularly updated reference source for evaluation of radiative transfer (RT) codes used in Global Climate Models. CIRC differs from previous intercomparisons in that it relies on an observationally validated catalogue of cases. The seven CIRC Phase I baseline cases, five cloud-free, and two with overcast liquid clouds, are built around observations by the Atmospheric Radiation Measurements (ARM) program that satisfy the goals of Phase I, namely to examine radiative transfer (RT) model performance in realistic, yet not overly complex, atmospheric conditions. In addition to the seven baseline cases, additional idealized "subcases" are also examined to facilitate intrepretation of the causes of model errors. In addition to summarizing individual model performance with respect to reference line-by-line calculations and inter-model differences, we also highlight RT model behavior for conditions of doubled CO2, aspects of utilizing a spectral specification of surface albedo, and the impact of the inclusion of scattering in the thermal infrared. Our analysis suggests that RT models should work towards improving their calculation of diffuse shortwave flux, shortwave absorption, treatment of spectral surface albedo, and shortwave CO2 forcing. On the other hand, LW calculations appear to be significantly closer to the reference results. By enhancing the range of conditions under which participating codes are tested, future CIRC phases will hopefully allow even more rigorous examination of RT code performance.

  12. Path Weight Complementary Convolutional Code for Type-II Bit-Interleaved Coded Modulation Hybrid ARQ System

    Institute of Scientific and Technical Information of China (English)

    CHENG Yuxin; ZHANG Lei; YI Na; XIANG Haige

    2007-01-01

    Bit-interleaved coded modulation (BICM) is suitable to bandwidth-efficient communication systems. Hybrid automatic repeat request (HARQ) can provide more reliability to high-speed wireless data transmission. A new path weight complementary convolutional (PWCC) code used in the type-ll BICM-HARQ system is proposed. The PWCC code is composed of the original code and the complimentary code. The path in trellis with large hamming weight of the complimentary code is designed to compensate for the path in trellis with small hamming weight of the original code. Hence, both of the original code and the complimentary code can achieve the performance of the good code criterion of corresponding code rate. The throughput efficiency of the BICM-HARQ system wit PWCC code is higher than repeat code system, a little higher than puncture code system in low signal-to-noise ratio (SNR) values and much higher than puncture code system, the same as repeat code system in high SNR values. These results are confirmed by the simulation.

  13. NERO - A Post Maximum Supernova Radiation Transport Code

    CERN Document Server

    Maurer, I; Mazzali, P A; Taubenberger, S; Hachinger, S; Kromer, M; Sim, S; Hillebrandt, W

    2011-01-01

    The interpretation of supernova (SN) spectra is essential for deriving SN ejecta properties such as density and composition, which in turn can tell us about their progenitors and the explosion mechanism. A very large number of atomic processes are important for spectrum formation. Several tools for calculating SN spectra exist, but they mainly focus on the very early or late epochs. The intermediate phase, which requires a NLTE treatment of radiation transport has rarely been studied. In this paper we present a new SN radiation transport code, NERO, which can look at those epochs. All the atomic processes are treated in full NLTE, under a steady-state assumption. This is a valid approach between roughly 50 and 500 days after the explosion depending on SN type. This covers the post-maximum photospheric and the early and the intermediate nebular phase. As a test, we compare NERO to the radiation transport code of Jerkstrand et al. (2011) and to the nebular code of Mazzali et al. (2001). All three codes have bee...

  14. NERO- a post-maximum supernova radiation transport code

    Science.gov (United States)

    Maurer, I.; Jerkstrand, A.; Mazzali, P. A.; Taubenberger, S.; Hachinger, S.; Kromer, M.; Sim, S.; Hillebrandt, W.

    2011-12-01

    The interpretation of supernova (SN) spectra is essential for deriving SN ejecta properties such as density and composition, which in turn can tell us about their progenitors and the explosion mechanism. A very large number of atomic processes are important for spectrum formation. Several tools for calculating SN spectra exist, but they mainly focus on the very early or late epochs. The intermediate phase, which requires a non-local thermodynamic equilibrium (NLTE) treatment of radiation transport has rarely been studied. In this paper, we present a new SN radiation transport code, NERO, which can look at those epochs. All the atomic processes are treated in full NLTE, under a steady-state assumption. This is a valid approach between roughly 50 and 500 days after the explosion depending on SN type. This covers the post-maximum photospheric and the early and the intermediate nebular phase. As a test, we compare NERO to the radiation transport code of Jerkstrand, Fransson & Kozma and to the nebular code of Mazzali et al. All three codes have been developed independently and a comparison provides a valuable opportunity to investigate their reliability. Currently, NERO is one-dimensional and can be used for predicting spectra of synthetic explosion models or for deriving SN properties by spectral modelling. To demonstrate this, we study the spectra of the 'normal' Type Ia supernova (SN Ia) 2005cf between 50 and 350 days after the explosion and identify most of the common SN Ia line features at post-maximum epochs.

  15. Radiation sterilization of enzyme hybrids with biodegradable polymers

    Energy Technology Data Exchange (ETDEWEB)

    Furuta, Masakazu E-mail: mfuruta@riast.osakafu-u.ac.jp; Oka, Masahito; Hayashi, Toshio

    2002-03-01

    Ionizing radiations, which have already been utilized for the sterilization of medical supplies as well as gas fumigation, should be the final candidate to decontaminate 'hybrid' biomaterials containing bio-active materials including enzymes because irradiation induces neither heat nor substances affecting the quality of the materials and our health. In order to check the feasibility of {sup 60}Co-gamma rays on these materials, we selected commercial proteases including papain and bromelain hybridized with commercial activated chitosan beads and demonstrated that these enzyme-hybrids suspended in water showed the significant radiation durability of more than twice as much as free enzyme solution at 25-kGy irradiation. Enhanced thermal and storage stability of the enzyme hybrids were not affected by the same dose level of irradiation, either, indicating that commercial irradiation sterilization method is applicable to enzyme hybrids without modification.

  16. A Radiation Solver for the National Combustion Code

    Science.gov (United States)

    Sockol, Peter M.

    2015-01-01

    A methodology is given that converts an existing finite volume radiative transfer method that requires input of local absorption coefficients to one that can treat a mixture of combustion gases and compute the coefficients on the fly from the local mixture properties. The Full-spectrum k-distribution method is used to transform the radiative transfer equation (RTE) to an alternate wave number variable, g . The coefficients in the transformed equation are calculated at discrete temperatures and participating species mole fractions that span the values of the problem for each value of g. These results are stored in a table and interpolation is used to find the coefficients at every cell in the field. Finally, the transformed RTE is solved for each g and Gaussian quadrature is used to find the radiant heat flux throughout the field. The present implementation is in an existing cartesian/cylindrical grid radiative transfer code and the local mixture properties are given by a solution of the National Combustion Code (NCC) on the same grid. Based on this work the intention is to apply this method to an existing unstructured grid radiation code which can then be coupled directly to NCC.

  17. IRIS: A Generic Three-Dimensional Radiative Transfer Code

    CERN Document Server

    Ibgui, L; Lanz, T; Stehlé, C

    2012-01-01

    We present IRIS, a new generic three-dimensional (3D) spectral radiative transfer code that generates synthetic spectra, or images. It can be used as a diagnostic tool for comparison with astrophysical observations or laboratory astrophysics experiments. We have developed a 3D short-characteristic solver that works with a 3D nonuniform Cartesian grid. We have implemented a piecewise cubic, locally monotonic, interpolation technique that dramatically reduces the numerical diffusion effect. The code takes into account the velocity gradient effect resulting in gradual Doppler shifts of photon frequencies and subsequent alterations of spectral line profiles. It can also handle periodic boundary conditions. This first version of the code assumes Local Thermodynamic Equilibrium (LTE) and no scattering. The opacities and source functions are specified by the user. In the near future, the capabilities of IRIS will be extended to allow for non-LTE and scattering modeling. IRIS has been validated through a number of te...

  18. New Parallel computing framework for radiation transport codes

    Energy Technology Data Exchange (ETDEWEB)

    Kostin, M.A.; /Michigan State U., NSCL; Mokhov, N.V.; /Fermilab; Niita, K.; /JAERI, Tokai

    2010-09-01

    A new parallel computing framework has been developed to use with general-purpose radiation transport codes. The framework was implemented as a C++ module that uses MPI for message passing. The module is significantly independent of radiation transport codes it can be used with, and is connected to the codes by means of a number of interface functions. The framework was integrated with the MARS15 code, and an effort is under way to deploy it in PHITS. Besides the parallel computing functionality, the framework offers a checkpoint facility that allows restarting calculations with a saved checkpoint file. The checkpoint facility can be used in single process calculations as well as in the parallel regime. Several checkpoint files can be merged into one thus combining results of several calculations. The framework also corrects some of the known problems with the scheduling and load balancing found in the original implementations of the parallel computing functionality in MARS15 and PHITS. The framework can be used efficiently on homogeneous systems and networks of workstations, where the interference from the other users is possible.

  19. New Parallel computing framework for radiation transport codes

    CERN Document Server

    Kostin, M A; Niita, K

    2012-01-01

    A new parallel computing framework has been developed to use with general-purpose radiation transport codes. The framework was implemented as a C++ module that uses MPI for message passing. The module is significantly independent of radiation transport codes it can be used with, and is connected to the codes by means of a number of interface functions. The frame work was integrated with the MARS15 code, and an effort is under way to deploy it in PHITS. Besides the parallel computing functionality, the framework offers a checkpoint facility that allows restarting calculations with a saved checkpoint file. The checkpoint facility can be used in single process calculations as well as in the parallel regime. Several checkpoint files can be merged into one thus combining results of several calculations. The framework also corrects some of the known problems with the sch eduling and load balancing found in the original implementations of the parallel computing functionality in MARS15 and PHITS. The framework can be...

  20. Coding with Side Information for Radiation-Tolerant Memory Devices

    Science.gov (United States)

    Hwang, E.; Jeon, S.; Negi, R.; Vijaya Kumar, B. V. K.; Cheng, M. K.

    2011-11-01

    Memory devices aboard spacecraft experience radiation-induced errors either in the form of temporary upsets (soft errors) or permanent defects (hard or stuck-at errors). Error-correcting codes (ECCs) are used to recover memory content from errors where defective cells are either regarded as erasures by the decoder or entire blocks containing defective cells are marked as unusable. In this article, alternative coding schemes are investigated for memory devices in space, where the encoder is provided with the locations of the defective cells, denoted by side information. This coding approach has the potential to improve the overall storage capacity of memory devices, since the information theoretic capacity of a channel where side information is only available at the encoder is the same as the capacity where side information is available at both the encoder and decoder. Spacecraft memory controllers typically scrub memory devices periodically for errors. Partial side information can be obtained during this scrubbing process by comparing the ECC decoder output with its input and thereby avoid the need for additional cell tests or storage overhead. In between scrubbings, the encoder can use this partial side information to account for permanent defects to improve reliability or to increase the storage capacity of onboard memory devices. In order to achieve performance gains for practical memory systems, several coding schemes that adaptively incorporate the codeword with the known side information are proposed in this article. The proposed coding schemes are evaluated by numerical simulations on a memory channel model characterized by soft and hard errors. Simulation results show that while coding with complete side information at the encoder offers the most performance gain compared to when coding without side information is used, coding with partial side information can close the gap between the optimal and current approach without incurring much additional overhead

  1. IRIS: a generic three-dimensional radiative transfer code

    Science.gov (United States)

    Ibgui, L.; Hubeny, I.; Lanz, T.; Stehlé, C.

    2013-01-01

    Context. For most astronomical objects, radiation is the only probe of their physical properties. Therefore, it is important to have the most elaborate theoretical tool to interpret observed spectra or images, thus providing invaluable information to build theoretical models of the physical nature, the structure, and the evolution of the studied objects. Aims: We present IRIS, a new generic three-dimensional (3D) spectral radiative transfer code that generates synthetic spectra, or images. It can be used as a diagnostic tool for comparison with astrophysical observations or laboratory astrophysics experiments. Methods: We have developed a 3D short-characteristic solver that works with a 3D nonuniform Cartesian grid. We have implemented a piecewise cubic, locally monotonic, interpolation technique that dramatically reduces the numerical diffusion effect. The code takes into account the velocity gradient effect resulting in gradual Doppler shifts of photon frequencies and subsequent alterations of spectral line profiles. It can also handle periodic boundary conditions. This first version of the code assumes local thermodynamic equilibrium (LTE) and no scattering. The opacities and source functions are specified by the user. In the near future, the capabilities of IRIS will be extended to allow for non-LTE and scattering modeling. Results: IRIS has been validated through a number of tests. We provide the results for the most relevant ones, in particular a searchlight beam test, a comparison with a 1D plane-parallel model, and a test of the velocity gradient effect. Conclusions: IRIS is a generic code to address a wide variety of astrophysical issues applied to different objects or structures, such as accretion shocks, jets in young stellar objects, stellar atmospheres, exoplanet atmospheres, accretion disks, rotating stellar winds, cosmological structures. It can also be applied to model laboratory astrophysics experiments, such as radiative shocks produced with high

  2. A CORBA server for the Radiation Hybrid DataBase.

    Science.gov (United States)

    Rodriguez-Tomé, P; Helgesen, C; Lijnzaad, P; Jungfer, K

    1997-01-01

    Modern biology depends on a wide range of software interacting with a large number of data sources, varying both in size, complexity and structure. The range of important databases in molecular biology and genetics makes it crucial to overcome the problems which this multiplicity presents. At EMBL-EBI we have started to use CORBA technology to support interoperability between a variety of databases, as well as to facilitate the integration of tools that access these databases. Within the Radiation Hybrid DataBase project we are confronted daily with the interoperation and linking issues. In this paper we present a CORBA infrastructure implemented to access the Radiation Hybrid DataBase.

  3. A general hybrid radiation transport scheme for star formation simulations on an adaptive grid

    Energy Technology Data Exchange (ETDEWEB)

    Klassen, Mikhail; Pudritz, Ralph E. [Department of Physics and Astronomy, McMaster University 1280 Main Street W, Hamilton, ON L8S 4M1 (Canada); Kuiper, Rolf [Max Planck Institute for Astronomy Königstuhl 17, D-69117 Heidelberg (Germany); Peters, Thomas [Institut für Computergestützte Wissenschaften, Universität Zürich Winterthurerstrasse 190, CH-8057 Zürich (Switzerland); Banerjee, Robi; Buntemeyer, Lars, E-mail: klassm@mcmaster.ca [Hamburger Sternwarte, Universität Hamburg Gojenbergsweg 112, D-21029 Hamburg (Germany)

    2014-12-10

    Radiation feedback plays a crucial role in the process of star formation. In order to simulate the thermodynamic evolution of disks, filaments, and the molecular gas surrounding clusters of young stars, we require an efficient and accurate method for solving the radiation transfer problem. We describe the implementation of a hybrid radiation transport scheme in the adaptive grid-based FLASH general magnetohydrodyanmics code. The hybrid scheme splits the radiative transport problem into a raytracing step and a diffusion step. The raytracer captures the first absorption event, as stars irradiate their environments, while the evolution of the diffuse component of the radiation field is handled by a flux-limited diffusion solver. We demonstrate the accuracy of our method through a variety of benchmark tests including the irradiation of a static disk, subcritical and supercritical radiative shocks, and thermal energy equilibration. We also demonstrate the capability of our method for casting shadows and calculating gas and dust temperatures in the presence of multiple stellar sources. Our method enables radiation-hydrodynamic studies of young stellar objects, protostellar disks, and clustered star formation in magnetized, filamentary environments.

  4. A General Hybrid Radiation Transport Scheme for Star Formation Simulations on an Adaptive Grid

    Science.gov (United States)

    Klassen, Mikhail; Kuiper, Rolf; Pudritz, Ralph E.; Peters, Thomas; Banerjee, Robi; Buntemeyer, Lars

    2014-12-01

    Radiation feedback plays a crucial role in the process of star formation. In order to simulate the thermodynamic evolution of disks, filaments, and the molecular gas surrounding clusters of young stars, we require an efficient and accurate method for solving the radiation transfer problem. We describe the implementation of a hybrid radiation transport scheme in the adaptive grid-based FLASH general magnetohydrodyanmics code. The hybrid scheme splits the radiative transport problem into a raytracing step and a diffusion step. The raytracer captures the first absorption event, as stars irradiate their environments, while the evolution of the diffuse component of the radiation field is handled by a flux-limited diffusion solver. We demonstrate the accuracy of our method through a variety of benchmark tests including the irradiation of a static disk, subcritical and supercritical radiative shocks, and thermal energy equilibration. We also demonstrate the capability of our method for casting shadows and calculating gas and dust temperatures in the presence of multiple stellar sources. Our method enables radiation-hydrodynamic studies of young stellar objects, protostellar disks, and clustered star formation in magnetized, filamentary environments.

  5. Comparison of codes assessing radiation exposure of aircraft crew due to galactic cosmic radiation

    Energy Technology Data Exchange (ETDEWEB)

    Bottollier-Depois, Jean-Francois [IRSN Institute for Radiological Protection and Nuclear Safety, Fontenay-aux-Roses (France); Beck, Peter; Latocha, Marcin [AIT Austrian Institute of Technology, Vienna (Austria). Health and Environment Dept.; Mares, Vladimir; Ruehm, Werner [HMGU Helmholtz Zentrum Muenchen, Neuherberg (Germany). Inst. of Radiation Protection; Matthiae, Daniel [DLR Deutsches Zentrum fuer Luft- und Raumfahrt, Koeln (Germany). Inst. of Aerospace Medicine; Wissmann, Frank [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

    2012-05-15

    The aim of this report is to compare the doses and dose rates calculated by various codes assessing radiation exposure of aircraft crew due to cosmic radiation. Some of the codes are used routinely for radiation protection purposes while others are purely for scientific use. The calculations were done using a set of representative, real flight routes around the globe. The results are presented in an anonymous way. This comparison is of major importance since a real determination of effective dose is not possible and, therefore, the different methods used to evaluate effective doses can be compared. Eleven codes have been used in this comparison exercise organised by EURADOS on harmonization of aircrew dosimetry practices in European countries. Some of these codes are based on simulations of the secondary field of cosmic radiation by Monte Carlo techniques; others use analytical solutions of the problem, while still others are mainly based on a fit to experimental data. The overall agreement between the codes, however, is better than 20 % from the median.

  6. EMMA: an AMR cosmological simulation code with radiative transfer

    CERN Document Server

    Aubert, Dominique; Ocvirk, Pierre

    2015-01-01

    EMMA is a cosmological simulation code aimed at investigating the reionization epoch. It handles simultaneously collisionless and gas dynamics, as well as radiative transfer physics using a moment-based description with the M1 approximation. Field quantities are stored and computed on an adaptive 3D mesh and the spatial resolution can be dynamically modified based on physically-motivated criteria. Physical processes can be coupled at all spatial and temporal scales. We also introduce a new and optional approximation to handle radiation : the light is transported at the resolution of the non-refined grid and only once the dynamics have been fully updated, whereas thermo-chemical processes are still tracked on the refined elements. Such an approximation reduces the overheads induced by the treatment of radiation physics. A suite of standard tests are presented and passed by EMMA, providing a validation for its future use in studies of the reionization epoch. The code is parallel and is able to use graphics proc...

  7. Multigroup radiation transport in one-dimensional Lagrangian radiation-hydrodynamics codes

    Energy Technology Data Exchange (ETDEWEB)

    Rottler, J.S.

    1987-01-01

    A new treatment of radiation transport has been added to the Lagrangian radiation-hydrodynamics code CHARTD. The new energy flow model was derived based on the assumption that the directional dependence of the radiation energy density can be represented by the first two terms of a spherical harmonic expansion, and that the photon energy spectrum can be partitioned into energy groups. The time derivative in the second moment equation, which is usually neglected, is retained in this implementation of the multigroup P-1 approximation. An accelerated iterative scheme is used to solve the difference equations. The new energy flow model and the iterative scheme will be described.

  8. Development of a predictive code for aircrew radiation exposure.

    Science.gov (United States)

    McCall, M J; Lemay, F; Bean, M R; Lewis, B J; Bennett, L G I

    2009-10-01

    Using the empirical data measured by the Royal Military College with a tissue equivalent proportional counter, a model was derived to allow for the interpolation of the dose rate for any global position, altitude and date. Through integration of the dose-rate function over a great circle flight path or between various waypoints, a Predictive Code for Aircrew Radiation Exposure (PCAire) was further developed to provide an estimate of the total dose equivalent on any route worldwide at any period in the solar cycle.

  9. Radiation hybrid mapping of cataract genes in the dog

    NARCIS (Netherlands)

    Hunter, L; Sidjanin, D; Johnson, J; Zangerl, B; Galibert, F; Andre, C; Kirkness, E; Talamas, E; Acland, G; Aguirre, G

    2006-01-01

    Purpose: To facilitate the molecular characterization of naturally occurring cataracts in dogs by providing the radiation hybrid location of 21 cataract-associated genes along with their closely associated polymorphic markers. These can be used for segregation testing of the candidate genes in canin

  10. Ancient hybridization fuels rapid cichlid fish adaptive radiations

    Science.gov (United States)

    Meier, Joana I.; Marques, David A.; Mwaiko, Salome; Wagner, Catherine E.; Excoffier, Laurent; Seehausen, Ole

    2017-01-01

    Understanding why some evolutionary lineages generate exceptionally high species diversity is an important goal in evolutionary biology. Haplochromine cichlid fishes of Africa's Lake Victoria region encompass >700 diverse species that all evolved in the last 150,000 years. How this ‘Lake Victoria Region Superflock' could evolve on such rapid timescales is an enduring question. Here, we demonstrate that hybridization between two divergent lineages facilitated this process by providing genetic variation that subsequently became recombined and sorted into many new species. Notably, the hybridization event generated exceptional allelic variation at an opsin gene known to be involved in adaptation and speciation. More generally, differentiation between new species is accentuated around variants that were fixed differences between the parental lineages, and that now appear in many new combinations in the radiation species. We conclude that hybridization between divergent lineages, when coincident with ecological opportunity, may facilitate rapid and extensive adaptive radiation. PMID:28186104

  11. Radiative Transfer Code: Application to the calculation of PAR

    Indian Academy of Sciences (India)

    D Emmanuel; D Phillippe; C Malik

    2000-12-01

    The production of carbon in the ocean, the so-called primary production, depends on various physico- biological parameters: the biomass and nutrient amounts in oceans, the salinity and temperature of the water and the light available in the water column. We focus on the visible spectrum of the solar radiation defined as the Photosynthetically Active Radiation (PAR). We developed a model (Chami et al. 1997) to simulate the behavior of the solar beam in the atmosphere and the ocean. We first describe the theoretical basis of the code and the method we used to solve the radiative transfer equation (RTE): the successive orders of scattering (SO). The second part deals with a sensitivity study of the PAR just above and below the sea surface for various atmospheric conditions. In a cloudy sky, we computed a ratio between vector fluxes just above the sea surface and spherical fluxes just beneath the sea surface. When the optical thickness of the cloud increases this ratio remains constant and around 1.29. This parameter is convenient to convert vector flux at the sea surface as retrieved from satellite to PAR. Subsequently, we show how solar radiation as vector flux rather than PAR leads to an underestimate of the primary production up to 40% for extreme cases.

  12. Recent radiation damage studies and developments of the Marlowe code

    Science.gov (United States)

    Ortiz, C. J.; Souidi, A.; Becquart, C. S.; Domain, C.; Hou, M.

    2014-07-01

    Radiation damage in materials relevant to applications evolves over time scales spanning from the femtosecond - the characteristic time for an atomic collision - to decades - the aging time expected for nuclear materials. The relevant kinetic energies of atoms span from thermal motion to the MeV range.The question motivating this contribution is to identify the relationship between elementary atomic displacements triggered by irradiation and the subsequent microstructural evolution of metals in the long term. The Marlowe code, based on the binary collision approximation (BCA) is used to simulate the sequences of atomic displacements generated by energetic primary recoils and the Object Kinetic Monte Carlo code LAKIMOCA, parameterized on a range of ab initio calculations, is used to predict the subsequent long-term evolution of point defect and clusters thereof. In agreement with full Molecular Dynamics, BCA displacement cascades in body-centered cubic (BCC) Fe and a face-centered cubic (FCC) Febond Nibond Cr alloy display recursive properties that are found useful for predictions in the long term.The case of defects evolution in W due to external irradiation with energetic H and He is also discussed. To this purpose, it was useful to extend the inelastic energy loss model available in Marlowe up to the Bethe regime. The last version of the Marlowe code (version 15) was delivered before message passing instructions softwares (such as MPI) were available but the structure of the code was designed in such a way to permit parallel executions within a distributed memory environment. This makes possible to obtain N different cascades simultaneously using N independent nodes without any communication between processors. The parallelization of the code using MPI was recently achieved by one author of this report (C.J.O.). Typically, the parallelized version of Marlowe allows simulating millions of displacement cascades using a limited number of processors (<64) within only

  13. Academic Training - The use of Monte Carlo radiation transport codes in radiation physics and dosimetry

    CERN Multimedia

    Françoise Benz

    2006-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 27, 28, 29 June 11:00-12:00 - TH Conference Room, bldg. 4 The use of Monte Carlo radiation transport codes in radiation physics and dosimetry F. Salvat Gavalda,Univ. de Barcelona, A. FERRARI, CERN-AB, M. SILARI, CERN-SC Lecture 1. Transport and interaction of electromagnetic radiation F. Salvat Gavalda,Univ. de Barcelona Interaction models and simulation schemes implemented in modern Monte Carlo codes for the simulation of coupled electron-photon transport will be briefly reviewed. Different schemes for simulating electron transport will be discussed. Condensed algorithms, which rely on multiple-scattering theories, are comparatively fast, but less accurate than mixed algorithms, in which hard interactions (with energy loss or angular deflection larger than certain cut-off values) are simulated individually. The reliability, and limitations, of electron-interaction models and multiple-scattering theories will be analyzed. Benchmark comparisons of simu...

  14. Hybrid multinary modulation codes for page-oriented holographic data storage

    Science.gov (United States)

    Berger, G.; Dietz, M.; Denz, C.

    2008-11-01

    Hybrid multinary block codes for implementation in page-oriented holographic storage systems are proposed. The codes utilize combined phase and amplitude modulations to encode input data. In comparison to pure amplitude-or pure phase-modulated block code designs hybrid multinary modulation coding allows us to augment the storage density at an unchanged error rate. Two different hybrid modulation code designs are introduced. Experimental implementation is thoroughly discussed, especially concentrating on readout concepts. Phase-resolved readout is accomplished by optical addition and subtraction, using an unmodulated reference page. Experimental results indicate that the overall error rate is usually dominated by errors related to amplitude detection. The study suggests that capacity gains of up to 31% or 47% are reasonable when utilizing phase modulations in conjunction with binary or ternary amplitude modulation.

  15. High performance radiation curable hybrid coatings

    Science.gov (United States)

    Nik Salleh, Nik Ghazali; Sofian Alias, Mohd; Gläsel, H.-J.; Mehnert, R.

    2013-03-01

    Radiation curing is one of the most effective processes to produce rapidly composite materials at ambient temperature. Silica nanoparticles can be introduced into radiation curable resins to produce scratch and abrasion resistant materials, which can be used as sealants or clear coatings. In preparation of radiation cured polymeric composites for wood based products such as medium density fiberboard etc., we synthesized radiation curable silico-organic nanoparticles from silica/acrylates system. These nano-sized silica particles were used as fillers. Epoxy acrylates was used as prepolymer while pentaerythritol triacrylate and tetraacrylate (PETIA) was used as monomer. The acrylated epoxy resin synthesized from palm oil based product (EPOLA) i.e. bio-renewable raw materials was also used in the system. The surface of the silica was chemically modified to improve the embedding of the filler within the acrylate matrix. Modification of the silica surface using silane was done to overcome the problem of incompatibility with acrylates at high silica contents. The nature of the nanoparticles is now changed from hydrophilic to organophilic. In these investigations, we use low energy electron beam accelerator to initiate polymerization and interaction at the interface between the nanoparticles and the monomeric materials. These polymerization active nanoparticles were obtained by heterogeneous hydrolytic condensation of the silane to the silanol groups of the silica particles. Formulations useful for technical coating processes could be prepared and these composite materials showed highly improved mechanical properties. They also provided a high network density whilst the coatings remain transparent. These polymeric nanocomposites show excellent resistances toward abrasion properties including scratch property as compared to pure acrylates.

  16. A dual-sided coded-aperture radiation detection system

    Science.gov (United States)

    Penny, R. D.; Hood, W. E.; Polichar, R. M.; Cardone, F. H.; Chavez, L. G.; Grubbs, S. G.; Huntley, B. P.; Kuharski, R. A.; Shyffer, R. T.; Fabris, L.; Ziock, K. P.; Labov, S. E.; Nelson, K.

    2011-10-01

    We report the development of a large-area, mobile, coded-aperture radiation imaging system for localizing compact radioactive sources in three dimensions while rejecting distributed background. The 3D Stand-Off Radiation Detection System (SORDS-3D) has been tested at speeds up to 95 km/h and has detected and located sources in the millicurie range at distances of over 100 m. Radiation data are imaged to a geospatially mapped world grid with a nominal 1.25- to 2.5-m pixel pitch at distances out to 120 m on either side of the platform. Source elevation is also extracted. Imaged radiation alarms are superimposed on a side-facing video log that can be played back for direct localization of sources in buildings in urban environments. The system utilizes a 37-element array of 5×5×50 cm 3 cesium-iodide (sodium) detectors. Scintillation light is collected by a pair of photomultiplier tubes placed at either end of each detector, with the detectors achieving an energy resolution of 6.15% FWHM (662 keV) and a position resolution along their length of 5 cm FWHM. The imaging system generates a dual-sided two-dimensional image allowing users to efficiently survey a large area. Imaged radiation data and raw spectra are forwarded to the RadioNuclide Analysis Kit (RNAK), developed by our collaborators, for isotope ID. An intuitive real-time display aids users in performing searches. Detector calibration is dynamically maintained by monitoring the potassium-40 peak and digitally adjusting individual detector gains. We have recently realized improvements, both in isotope identification and in distinguishing compact sources from background, through the installation of optimal-filter reconstruction kernels.

  17. Performance Evaluation of Hybrid ARQ with Code Combining in Packet-Oriented CDMA System

    Institute of Scientific and Technical Information of China (English)

    CHENQingchun; FANPingzhi

    2004-01-01

    In this paper, an extended SNR (signal to noise ratio) concept is proposed to explicate the contribution of code combining to the performance improvement of hybrid ARQ (Automatic repeat request) over the additive white Gaussian noise channel. By extending the Pursley's SNR analysis to hybrid ARQ with code combining in packet-oriented CDMA (Code division multiple access)system, the extended SNR formula is derived, which describes explicitly the SNR variation of the code symbol involved in code combining. It is revealed that the extended SNR formula includes Pursley's SNR formula as a specialcase. Moreover, it is shown that the effective SNR of the combined symbol is increased by a coefficient, which is proportional to the number of repeated replicas involved in the code combining. Based on the extended SNR formula and the resultant SNR variation, a quasi-analytical approximation method is proposed for the performance evaluation of hybrid ARQ with code combining. The residual error rates, average transmission number together with throughput performance are presented by means of numerical analysis and through simulations. It is validated that the extended SNR formula and the resultant quasi-analytical approximations offer a simplified routine to estimate the performance of hybrid ARQ with code combining, particularly for the applications whose reliability performance with respect to the FEC counterpart system could be numerically calculated or evaluated through simulations.

  18. Comparisons of time explicit hybrid kinetic-fluid code Architect for Plasma Wakefield Acceleration with a full PIC code

    Science.gov (United States)

    Massimo, F.; Atzeni, S.; Marocchino, A.

    2016-12-01

    Architect, a time explicit hybrid code designed to perform quick simulations for electron driven plasma wakefield acceleration, is described. In order to obtain beam quality acceptable for applications, control of the beam-plasma-dynamics is necessary. Particle in Cell (PIC) codes represent the state-of-the-art technique to investigate the underlying physics and possible experimental scenarios; however PIC codes demand the necessity of heavy computational resources. Architect code substantially reduces the need for computational resources by using a hybrid approach: relativistic electron bunches are treated kinetically as in a PIC code and the background plasma as a fluid. Cylindrical symmetry is assumed for the solution of the electromagnetic fields and fluid equations. In this paper both the underlying algorithms as well as a comparison with a fully three dimensional particle in cell code are reported. The comparison highlights the good agreement between the two models up to the weakly non-linear regimes. In highly non-linear regimes the two models only disagree in a localized region, where the plasma electrons expelled by the bunch close up at the end of the first plasma oscillation.

  19. What do Codes of Conduct do? Hybrid Constitutionalization and Militarization in Military Markets

    DEFF Research Database (Denmark)

    Leander, Anna

    2012-01-01

    jursigenerativities) of these codes. The article illustrates the argument through an analysis of two jurisgenerative processes (linked to regulation and to politics) triggered by Codes of Conduct in commercial military markets. It shows that the codes are creating both a hybrid regulatory (or constitutional) network......-military/security professional involvement in the debate over the regulation of commercial military markets would be the appropriate way of handling it....

  20. Development and Benchmarking of a Hybrid PIC Code For Dense Plasmas and Fast Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Witherspoon, F. Douglas [HyperV Technologies Corp.; Welch, Dale R. [Voss Scientific, LLC; Thompson, John R. [FAR-TECH, Inc.; MacFarlane, Joeseph J. [Prism Computational Sciences Inc.; Phillips, Michael W. [Advanced Energy Systems, Inc.; Bruner, Nicki [Voss Scientific, LLC; Mostrom, Chris [Voss Scientific, LLC; Thoma, Carsten [Voss Scientific, LLC; Clark, R. E. [Voss Scientific, LLC; Bogatu, Nick [FAR-TECH, Inc.; Kim, Jin-Soo [FAR-TECH, Inc.; Galkin, Sergei [FAR-TECH, Inc.; Golovkin, Igor E. [Prism Computational Sciences, Inc.; Woodruff, P. R. [Prism Computational Sciences, Inc.; Wu, Linchun [HyperV Technologies Corp.; Messer, Sarah J. [HyperV Technologies Corp.

    2014-05-20

    Radiation processes play an important role in the study of both fast ignition and other inertial confinement schemes, such as plasma jet driven magneto-inertial fusion, both in their effect on energy balance, and in generating diagnostic signals. In the latter case, warm and hot dense matter may be produced by the convergence of a plasma shell formed by the merging of an assembly of high Mach number plasma jets. This innovative approach has the potential advantage of creating matter of high energy densities in voluminous amount compared with high power lasers or particle beams. An important application of this technology is as a plasma liner for the flux compression of magnetized plasma to create ultra-high magnetic fields and burning plasmas. HyperV Technologies Corp. has been developing plasma jet accelerator technology in both coaxial and linear railgun geometries to produce plasma jets of sufficient mass, density, and velocity to create such imploding plasma liners. An enabling tool for the development of this technology is the ability to model the plasma dynamics, not only in the accelerators themselves, but also in the resulting magnetized target plasma and within the merging/interacting plasma jets during transport to the target. Welch pioneered numerical modeling of such plasmas (including for fast ignition) using the LSP simulation code. Lsp is an electromagnetic, parallelized, plasma simulation code under development since 1995. It has a number of innovative features making it uniquely suitable for modeling high energy density plasmas including a hybrid fluid model for electrons that allows electrons in dense plasmas to be modeled with a kinetic or fluid treatment as appropriate. In addition to in-house use at Voss Scientific, several groups carrying out research in Fast Ignition (LLNL, SNL, UCSD, AWE (UK), and Imperial College (UK)) also use LSP. A collaborative team consisting of HyperV Technologies Corp., Voss Scientific LLC, FAR-TECH, Inc., Prism

  1. Development and Benchmarking of a Hybrid PIC Code For Dense Plasmas and Fast Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Witherspoon, F. Douglas [HyperV Technologies Corp.; Welch, Dale R. [Voss Scientific, LLC; Thompson, John R. [FAR-TECH, Inc.; MacFarlane, Joeseph J. [Prism Computational Sciences Inc.; Phillips, Michael W. [Advanced Energy Systems, Inc.; Bruner, Nicki [Voss Scientific, LLC; Mostrom, Chris [Voss Scientific, LLC; Thoma, Carsten [Voss Scientific, LLC; Clark, R. E. [Voss Scientific, LLC; Bogatu, Nick [FAR-TECH, Inc.; Kim, Jin-Soo [FAR-TECH, Inc.; Galkin, Sergei [FAR-TECH, Inc.; Golovkin, Igor E. [Prism Computational Sciences, Inc.; Woodruff, P. R. [Prism Computational Sciences, Inc.; Wu, Linchun [HyperV Technologies Corp.; Messer, Sarah J. [HyperV Technologies Corp.

    2014-05-20

    Radiation processes play an important role in the study of both fast ignition and other inertial confinement schemes, such as plasma jet driven magneto-inertial fusion, both in their effect on energy balance, and in generating diagnostic signals. In the latter case, warm and hot dense matter may be produced by the convergence of a plasma shell formed by the merging of an assembly of high Mach number plasma jets. This innovative approach has the potential advantage of creating matter of high energy densities in voluminous amount compared with high power lasers or particle beams. An important application of this technology is as a plasma liner for the flux compression of magnetized plasma to create ultra-high magnetic fields and burning plasmas. HyperV Technologies Corp. has been developing plasma jet accelerator technology in both coaxial and linear railgun geometries to produce plasma jets of sufficient mass, density, and velocity to create such imploding plasma liners. An enabling tool for the development of this technology is the ability to model the plasma dynamics, not only in the accelerators themselves, but also in the resulting magnetized target plasma and within the merging/interacting plasma jets during transport to the target. Welch pioneered numerical modeling of such plasmas (including for fast ignition) using the LSP simulation code. Lsp is an electromagnetic, parallelized, plasma simulation code under development since 1995. It has a number of innovative features making it uniquely suitable for modeling high energy density plasmas including a hybrid fluid model for electrons that allows electrons in dense plasmas to be modeled with a kinetic or fluid treatment as appropriate. In addition to in-house use at Voss Scientific, several groups carrying out research in Fast Ignition (LLNL, SNL, UCSD, AWE (UK), and Imperial College (UK)) also use LSP. A collaborative team consisting of HyperV Technologies Corp., Voss Scientific LLC, FAR-TECH, Inc., Prism

  2. VISRAD, 3-D Target Design and Radiation Simulation Code

    Science.gov (United States)

    Golovkin, Igor; Macfarlane, Joseph; Golovkina, Viktoriya

    2016-10-01

    The 3-D view factor code VISRAD is widely used in designing HEDP experiments at major laser and pulsed-power facilities, including NIF, OMEGA, OMEGA-EP, ORION, LMJ, Z, and PLX. It simulates target designs by generating a 3-D grid of surface elements, utilizing a variety of 3-D primitives and surface removal algorithms, and can be used to compute the radiation flux throughout the surface element grid by computing element-to-element view factors and solving power balance equations. Target set-up and beam pointing are facilitated by allowing users to specify positions and angular orientations using a variety of coordinates systems (e.g., that of any laser beam, target component, or diagnostic port). Analytic modeling for laser beam spatial profiles for OMEGA DPPs and NIF CPPs is used to compute laser intensity profiles throughout the grid of surface elements. We will discuss recent improvements to the software package and plans for future developments.

  3. Contributions of each isotope in structural material on radiation damage in a hybrid reactor

    Science.gov (United States)

    Günay, Mehtap

    2016-11-01

    In this study, the fluids were used in the liquid first-wall, blanket and shield zones of the designed hybrid reactor system. In this study, salt-heavy metal mixtures consisting of 93-85% Li20Sn80 + 5% SFG-PuO2 and 2-10% UO2, 93-85% Li20Sn80 + 5% SFG-PuO2 and 2-10% NpO2, and 93-85% Li20Sn80 + 5% SFG-PuO2 and 2-10% UCO were used as fluids. In this study, the effect on the radiation damage of spent fuel-grade (SFG)-PuO2, UO2, NpO2 and UCO contents was investigated in the structural material of a designed fusion-fission hybrid reactor system. In the designed hybrid reactor system were investigated the effect on the radiation damage of the selected fluid according to each isotopes of structural material in the structural material for 30 full power years (FPYs). Three-dimensional analyses were performed using the most recent MCNPX-2.7.0 Monte Carlo radiation transport code and the ENDF/B-VII.0 nuclear data library.

  4. A multi-scale code for flexible hybrid simulations

    CERN Document Server

    Leukkunen, L; Lopez-Acevedo, O

    2012-01-01

    Multi-scale computer simulations combine the computationally efficient classical algorithms with more expensive but also more accurate ab-initio quantum mechanical algorithms. This work describes one implementation of multi-scale computations using the Atomistic Simulation Environment (ASE). This implementation can mix classical codes like LAMMPS and the Density Functional Theory-based GPAW. Any combination of codes linked via the ASE interface however can be mixed. We also introduce a framework to easily add classical force fields calculators for ASE using LAMMPS, which also allows harnessing the full performance of classical-only molecular dynamics. Our work makes it possible to combine different simulation codes, quantum mechanical or classical, with great ease and minimal coding effort.

  5. Optical Code-Division Multiple-Access and Wavelength Division Multiplexing: Hybrid Scheme Review

    Directory of Open Access Journals (Sweden)

    P. Susthitha Menon

    2012-01-01

    Full Text Available Problem statement: Hybrid Optical Code-Division Multiple-Access (OCDMA and Wavelength-Division Multiplexing (WDM have flourished as successful schemes for expanding the transmission capacity as well as enhancing the security for OCDMA. However, a comprehensive review related to this hybrid system are lacking currently. Approach: The purpose of this paper is to review the literature on OCDMA-WDM overlay systems, including our hybrid approach of one-dimensional coding of SAC OCDMA with WDM signals. In addition, we present an additional review of other categorios of hybrid WDM/OCDMA schemes, where codes of OCDMA can be employed on each WDM wavelength. Furthermore, an essential background of OCDMA, recent coding techniques and security issues are also presented. Results: Our results indicate that the feasibility of transmitting both OCDMA and WDM users on the same spectrum band can be achieved using MQC family code with an acceptable performance as well as good data confidentiality. In addition, the WDM interference signals can be suppressed properly for detection of optical broadband CDMA using notch filters. Conclusion: The paper provides a comprehensive overview of hybrid OCDMA-WDM systems and can be used as a baseline study for other scientists in the similar scope of research.

  6. Development, Verification and Validation of Enclosure Radiation Capabilities in the CHarring Ablator Response (CHAR) Code

    Science.gov (United States)

    Salazar, Giovanni; Droba, Justin C.; Oliver, Brandon; Amar, Adam J.

    2016-01-01

    With the recent development of multi-dimensional thermal protection system (TPS) material response codes including the capabilities to account for radiative heating is a requirement. This paper presents the recent efforts to implement such capabilities in the CHarring Ablator Response (CHAR) code developed at NASA's Johnson Space Center. This work also describes the different numerical methods implemented in the code to compute view factors for radiation problems involving multiple surfaces. Furthermore, verification and validation of the code's radiation capabilities are demonstrated by comparing solutions to analytical results, to other codes, and to radiant test data.

  7. Adaptive hybrid subband image coding with DWT, DCT, and modified DPCM

    Science.gov (United States)

    Kim, Tae W.; Choe, Howard C.; Griswold, Norman C.

    1997-04-01

    Image coding based on subband decomposition with DPCM and PCM has received much attention in the areas of image compression research and industry. In this paper we present a new adaptive image subband coding with discrete wavelet transform, discrete cosine transform, and a modified DPCM. The main contribution of this work is the development of a simple, yet effective image compression and transmission algorithm. An important feature of this algorithm is the hybrid modified DPCM coding scheme which produces both simple, but significant, image compression and transmission coding.

  8. Longitudinal development of extensive air showers: hybrid code SENECA and full Monte Carlo

    CERN Document Server

    Ortiz, J A; De Souza, V; Ortiz, Jeferson A.; Tanco, Gustavo Medina

    2004-01-01

    New experiments, exploring the ultra-high energy tail of the cosmic ray spectrum with unprecedented detail, are exerting a severe pressure on extensive air hower modeling. Detailed fast codes are in need in order to extract and understand the richness of information now available. Some hybrid simulation codes have been proposed recently to this effect (e.g., the combination of the traditional Monte Carlo scheme and system of cascade equations or pre-simulated air showers). In this context, we explore the potential of SENECA, an efficient hybrid tridimensional simulation code, as a valid practical alternative to full Monte Carlo simulations of extensive air showers generated by ultra-high energy cosmic rays. We extensively compare hybrid method with the traditional, but time consuming, full Monte Carlo code CORSIKA which is the de facto standard in the field. The hybrid scheme of the SENECA code is based on the simulation of each particle with the traditional Monte Carlo method at two steps of the shower devel...

  9. CODE's new solar radiation pressure model for GNSS orbit determination

    Science.gov (United States)

    Arnold, D.; Meindl, M.; Beutler, G.; Dach, R.; Schaer, S.; Lutz, S.; Prange, L.; Sośnica, K.; Mervart, L.; Jäggi, A.

    2015-08-01

    The Empirical CODE Orbit Model (ECOM) of the Center for Orbit Determination in Europe (CODE), which was developed in the early 1990s, is widely used in the International GNSS Service (IGS) community. For a rather long time, spurious spectral lines are known to exist in geophysical parameters, in particular in the Earth Rotation Parameters (ERPs) and in the estimated geocenter coordinates, which could recently be attributed to the ECOM. These effects grew creepingly with the increasing influence of the GLONASS system in recent years in the CODE analysis, which is based on a rigorous combination of GPS and GLONASS since May 2003. In a first step we show that the problems associated with the ECOM are to the largest extent caused by the GLONASS, which was reaching full deployment by the end of 2011. GPS-only, GLONASS-only, and combined GPS/GLONASS solutions using the observations in the years 2009-2011 of a global network of 92 combined GPS/GLONASS receivers were analyzed for this purpose. In a second step we review direct solar radiation pressure (SRP) models for GNSS satellites. We demonstrate that only even-order short-period harmonic perturbations acting along the direction Sun-satellite occur for GPS and GLONASS satellites, and only odd-order perturbations acting along the direction perpendicular to both, the vector Sun-satellite and the spacecraft's solar panel axis. Based on this insight we assess in the third step the performance of four candidate orbit models for the future ECOM. The geocenter coordinates, the ERP differences w. r. t. the IERS 08 C04 series of ERPs, the misclosures for the midnight epochs of the daily orbital arcs, and scale parameters of Helmert transformations for station coordinates serve as quality criteria. The old and updated ECOM are validated in addition with satellite laser ranging (SLR) observations and by comparing the orbits to those of the IGS and other analysis centers. Based on all tests, we present a new extended ECOM which

  10. Ultracold, radiative charge transfer in hybrid Yb ion - Rb atom traps

    CERN Document Server

    McLaughlin, B M; Lane, I C; McCann, J F

    2014-01-01

    Ultracold hybrid ion-atom traps offer the possibility of microscopic manipulation of quantum coherences in the gas using the ion as a probe. However, inelastic processes, particularly charge transfer can be a significant process of ion loss and has been measured experimentally for the Yb$^{+}$ ion immersed in a Rb vapour. We use first-principles quantum chemistry codes to obtain the potential energy curves and dipole moments for the lowest-lying energy states of this complex. Calculations for the radiative decay processes cross sections and rate coefficients are presented for the total decay processes. Comparing the semi-classical Langevin approximation with the quantum approach, we find it provides a very good estimate of the background at higher energies. The results demonstrate that radiative decay mechanisms are important over the energy and temperature region considered. In fact, the Langevin process of ion-atom collisions dominates cold ion-atom collisions. For spin dependent processes \\cite{kohl13} the...

  11. Spatial resolution enhancement residual coding using hybrid wavelets and directional filter banks

    Indian Academy of Sciences (India)

    Ankit Ashokrao Bhurane; Prateek Chaplot; Dushyanth Nutulapati; Vikram M Gadre

    2015-10-01

    Traditional video coding uses classical predictive coding techniques, where a signal is initially approximated by taking advantage of the various redundancies present. Most of the video coding standards, including the latest HEVC, use the well-accepted procedure of applying transform coding on self-contained (intra) and inter-predicted frame residuals. Nevertheless, it has been shown in the literature that, a normal video frames possess distinct characteristics compared to a residual frame. In this paper, we have made use of hybrid wavelet transforms and directional filter banks (HWD) to encode resolution enhancement residuals in the context of scalable video coding. The results are presented for the use of HWD in the framework of the Dirac video codec. The experiments are carried out on a variety of test frames. Our experiments on residue coding using HWD show better performance compared to the conventional DWT, when tested on the same platform of the well-known SPIHT algorithm.

  12. Codebook Design and Hybrid Digital/Analog Coding for Parallel Rayleigh Fading Channels

    OpenAIRE

    Shi, Shuying; Larsson, Erik G.; Skoglund, Mikael

    2011-01-01

    Low-delay source-channel transmission over parallel fading channels is studied. In this scenario separate sourceand channel coding is highly suboptimal. A scheme based on hybrid digital/analog joint source-channel coding istherefore proposed, employing scalar quantization and polynomial-based analog bandwidth expansion. Simulationsdemonstrate substantial performance gains. Funding agencies|European Community|248993|EL-LIIT||Knut and Alice Wallenberg Foundation||

  13. Hybrid formulation of radiation transport in optically thick divertor plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Rosato, J.; Marandet, Y.; Bufferand, H.; Stamm, R. [PIIM, UMR 7345 Aix-Marseille Universite / CNRS, Centre de St-Jerome, Marseille (France); Reiter, D. [IEK-4 Plasmaphysik, Forschungszentrum Juelich GmbH, Juelich (Germany)

    2016-08-15

    Kinetic Monte Carlo simulations of coupled atom-radiation transport in optically thick divertor plasmas can be computationally very demanding, in particular in ITER relevant conditions or even larger devices, e.g. for power plant divertor studies. At high (∝ 10{sup 15} cm{sup -3}) atomic densities, it can be shown that sufficiently large divertors behave in certain areas like a black body near the first resonance line of hydrogen (Lyman α). This suggests that, at least in part, the use of continuum model (radiation hydrodynamics) can be sufficiently accurate, while being less time consuming. In this work, we report on the development of a hybrid model devoted to switch automatically between a kinetic and a continuum description according to the plasma conditions. Calculations of the photo-excitation rate in a homogeneous slab are performed as an illustration. The outlined hybrid concept might be also applicable to neutral atom transport, due to mathematical analogy of transport equations for neutrals and radiation. (copyright 2016 The Authors. Contributions to Plasma Physics published by Wiley-VCH Verlag GmbH and Co. KGaA Weinheim. This)

  14. The use of Monte Carlo radiation transport codes in radiation physics and dosimetry

    CERN Document Server

    CERN. Geneva; Ferrari, Alfredo; Silari, Marco

    2006-01-01

    Transport and interaction of electromagnetic radiation Interaction models and simulation schemes implemented in modern Monte Carlo codes for the simulation of coupled electron-photon transport will be briefly reviewed. In these codes, photon transport is simulated by using the detailed scheme, i.e., interaction by interaction. Detailed simulation is easy to implement, and the reliability of the results is only limited by the accuracy of the adopted cross sections. Simulations of electron and positron transport are more difficult, because these particles undergo a large number of interactions in the course of their slowing down. Different schemes for simulating electron transport will be discussed. Condensed algorithms, which rely on multiple-scattering theories, are comparatively fast, but less accurate than mixed algorithms, in which hard interactions (with energy loss or angular deflection larger than certain cut-off values) are simulated individually. The reliability, and limitations, of electron-interacti...

  15. Hybrid coding for split gray values in radiological image compression

    Science.gov (United States)

    Lo, Shih-Chung B.; Krasner, Brian; Mun, Seong K.; Horii, Steven C.

    1992-05-01

    Digital techniques are used more often than ever in a variety of fields. Medical information management is one of the largest digital technology applications. It is desirable to have both a large data storage resource and extremely fast data transmission channels for communication. On the other hand, it is also essential to compress these data into an efficient form for storage and transmission. A variety of data compression techniques have been developed to tackle a diversity of situations. A digital value decomposition method using a splitting and remapping method has recently been proposed for image data compression. This method attempts to employ an error-free compression for one part of the digital value containing highly significant value and uses another method for the second part of the digital value. We have reported that the effect of this method is substantial for the vector quantization and other spatial encoding techniques. In conjunction with DCT type coding, however, the splitting method only showed a limited improvement when compared to the nonsplitting method. With the latter approach, we used a nonoptimized method for the images possessing only the top three-most-significant- bit value (3MSBV) and produced a compression ratio of approximately 10:1. Since the 3MSB images are highly correlated and the same values tend to aggregate together, the use of area or contour coding was investigated. In our experiment, we obtained an average error-free compression ratio of 30:1 and 12:1 for 3MSB and 4MSB images, respectively, with the alternate value contour coding. With this technique, we clearly verified that the splitting method is superior to the nonsplitting method for finely digitized radiographs.

  16. Hybrid squeezing of solitonic resonant radiation in photonic crystal fibers

    CERN Document Server

    Tran, Truong X; Soeller, Christoph; Blow, Keith J; Biancalana, Fabio

    2011-01-01

    We report on the existence of a novel kind of squeezing in photonic crystal fibers which is conceptually intermediate between the four-wave mixing induced squeezing, in which all the participant waves are monochromatic waves, and the self-phase modulation induced squeezing for a single pulse in a coherent state. This hybrid squeezing occurs when an arbitrary short soliton emits quasi-monochromatic resonant radiation near a zero group velocity dispersion point of the fiber. Photons around the resonant frequency become strongly correlated due to the presence of the classical soliton, and a reduction of the quantum noise below the shot noise level is predicted.

  17. Chromosome mapping radiation hybrid data and stochastic spin models

    CERN Document Server

    Falk, C T

    1995-01-01

    This work approaches human chromosome mapping by developing algorithms for ordering markers associated with radiation hybrid data. Motivated by recent work of Boehnke et al. [1], we formulate the ordering problem by developing stochastic spin models to search for minimum-break marker configurations. As a particular application, the methods developed are applied to 14 human chromosome-21 markers tested by Cox et al. [2]. The methods generate configurations consistent with the best found by others. Additionally, we find that the set of low-lying configurations is described by a Markov-like ordering probability distribution. The distribution displays cluster correlations reflecting closely linked loci.

  18. Radiation Resistant Hybrid Lotus Effect Photoelectrocatalytic Self-Cleaning Anti-Contamination Coatings Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will develop radiation resistant hybrid Lotus Effect photoelectrocatalytic self-cleaning anti-contamination coatings for application to Lunar...

  19. Performance of Hybrid Concatenated Trellis Codes CPFSK with Iterative Decoding over Fading Channels

    CERN Document Server

    Gergis, Labib Francis

    2011-01-01

    Concatenation is a method of building long codes out of shorter ones, it attempts to meet the problem of decoding complexity by breaking the required computation into manageable segments. Concatenated Continuous Phase Frequency Shift Keying (CPFSK) facilitates powerful error correction. CPFSK also has the advantage of being bandwidth efficient and compatible with nonlinear amplifiers. Bandwidth efficient concatenated coded modulation schemes were designed for communication over Additive White Gaussian noise (AWGN), and Rayleigh fading channels. An analytical bounds on the performance of serial concatenated convolutional codes (SCCC), and parallel concatenated convolutionalcodes (PCCC), were derived as a base of comparison with the third category known as hybrid concatenated trellis codes scheme (HCTC). An upper bound to the average maximum-likelihood bit error probability of the three schemes were obtained. Design rules for the parallel, outer, and inner codes that maximize the interleaver's gain were discuss...

  20. Longitudinal development of extensive air showers: Hybrid code SENECA and full Monte Carlo

    Science.gov (United States)

    Ortiz, Jeferson A.; Medina-Tanco, Gustavo; de Souza, Vitor

    2005-06-01

    New experiments, exploring the ultra-high energy tail of the cosmic ray spectrum with unprecedented detail, are exerting a severe pressure on extensive air shower modelling. Detailed fast codes are in need in order to extract and understand the richness of information now available. Some hybrid simulation codes have been proposed recently to this effect (e.g., the combination of the traditional Monte Carlo scheme and system of cascade equations or pre-simulated air showers). In this context, we explore the potential of SENECA, an efficient hybrid tri-dimensional simulation code, as a valid practical alternative to full Monte Carlo simulations of extensive air showers generated by ultra-high energy cosmic rays. We extensively compare hybrid method with the traditional, but time consuming, full Monte Carlo code CORSIKA which is the de facto standard in the field. The hybrid scheme of the SENECA code is based on the simulation of each particle with the traditional Monte Carlo method at two steps of the shower development: the first step predicts the large fluctuations in the very first particle interactions at high energies while the second step provides a well detailed lateral distribution simulation of the final stages of the air shower. Both Monte Carlo simulation steps are connected by a cascade equation system which reproduces correctly the hadronic and electromagnetic longitudinal profile. We study the influence of this approach on the main longitudinal characteristics of proton, iron nucleus and gamma induced air showers and compare the predictions of the well known CORSIKA code using the QGSJET hadronic interaction model.

  1. Ethical codes. Fig leaf argument, ballast or cultural element for radiation protection?; Ethik-Codes. Feigenblatt, Ballast oder Kulturelement fuer den Strahlenschutz?

    Energy Technology Data Exchange (ETDEWEB)

    Gellermann, Rainer [Nuclear Control and Consulting GmbH, Braunschweig (Germany)

    2014-07-01

    The international association for radiation protection (IRPA) adopted in May 2004 a Code of Ethics in order to allow their members to hold an adequate professional level of ethical line of action. Based on this code of ethics the professional body of radiation protection (Fachverband fuer Strahlenschutz) has developed its own ethical code and adopted in 2005.

  2. A new hybrid coding for protein secondary structure prediction based on primary structure similarity.

    Science.gov (United States)

    Li, Zhong; Wang, Jing; Zhang, Shunpu; Zhang, Qifeng; Wu, Wuming

    2017-03-16

    The coding pattern of protein can greatly affect the prediction accuracy of protein secondary structure. In this paper, a novel hybrid coding method based on the physicochemical properties of amino acids and tendency factors is proposed for the prediction of protein secondary structure. The principal component analysis (PCA) is first applied to the physicochemical properties of amino acids to construct a 3-bit-code, and then the 3 tendency factors of amino acids are calculated to generate another 3-bit-code. Two 3-bit-codes are fused to form a novel hybrid 6-bit-code. Furthermore, we make a geometry-based similarity comparison of the protein primary structure between the reference set and the test set before the secondary structure prediction. We finally use the support vector machine (SVM) to predict those amino acids which are not detected by the primary structure similarity comparison. Experimental results show that our method achieves a satisfactory improvement in accuracy in the prediction of protein secondary structure.

  3. An improved method for producing radiation hybrids applied to human chromosome 19

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, C.L.

    1992-01-01

    At the initiation of the grant we had just produced radiation hybrids from a monochromosomal microcell hybrid containing human chromosome 19 as its only human component. Radiation hybrids were produced using doses of radiation ranging from 1000--8000 rads. Lethally irradiated cells were then fused to hamster recipients (CHTG49) and selected for growth in histidinol. Approximately 240 clones were isolated and 75 clones were expanded for the isolation of DNA. This report describes in situ hybridization studies and the introduction of markers into human chromosome 19.

  4. An Allele Real-Coded Quantum Evolutionary Algorithm Based on Hybrid Updating Strategy.

    Science.gov (United States)

    Zhang, Yu-Xian; Qian, Xiao-Yi; Peng, Hui-Deng; Wang, Jian-Hui

    2016-01-01

    For improving convergence rate and preventing prematurity in quantum evolutionary algorithm, an allele real-coded quantum evolutionary algorithm based on hybrid updating strategy is presented. The real variables are coded with probability superposition of allele. A hybrid updating strategy balancing the global search and local search is presented in which the superior allele is defined. On the basis of superior allele and inferior allele, a guided evolutionary process as well as updating allele with variable scale contraction is adopted. And H ε gate is introduced to prevent prematurity. Furthermore, the global convergence of proposed algorithm is proved by Markov chain. Finally, the proposed algorithm is compared with genetic algorithm, quantum evolutionary algorithm, and double chains quantum genetic algorithm in solving continuous optimization problem, and the experimental results verify the advantages on convergence rate and search accuracy.

  5. Performance analysis and code recognition for dual N-ary orthogonal hybrid modulation systems

    Institute of Scientific and Technical Information of China (English)

    Qiao Xiaoqiang; Zhao Hangsheng; Cai Yueming

    2008-01-01

    A dual N-ary orthogonal hybrid modulation system is introduced in this paper, which can increase the data rate greatly compared with conventional N-ary orthogonal spread spectrum system, so it can be used for high rate data communication. Then, three code recognition algorithms are presented for dual N-ary orthogonal hybrid modulation system and the analytic bit error rate (BER) performance of the system in additive white Gaussian noise (AWGN) and flat Rayleigh fading channel is derived. Finally, the computer simulation of the system with three code recognition algorithms is performed, which shows that the simplified maximum a posteriori (MAP) algorithm is the best for the system with a compromise between the performance and the complexity.

  6. An Allele Real-Coded Quantum Evolutionary Algorithm Based on Hybrid Updating Strategy

    Directory of Open Access Journals (Sweden)

    Yu-Xian Zhang

    2016-01-01

    Full Text Available For improving convergence rate and preventing prematurity in quantum evolutionary algorithm, an allele real-coded quantum evolutionary algorithm based on hybrid updating strategy is presented. The real variables are coded with probability superposition of allele. A hybrid updating strategy balancing the global search and local search is presented in which the superior allele is defined. On the basis of superior allele and inferior allele, a guided evolutionary process as well as updating allele with variable scale contraction is adopted. And Hε gate is introduced to prevent prematurity. Furthermore, the global convergence of proposed algorithm is proved by Markov chain. Finally, the proposed algorithm is compared with genetic algorithm, quantum evolutionary algorithm, and double chains quantum genetic algorithm in solving continuous optimization problem, and the experimental results verify the advantages on convergence rate and search accuracy.

  7. Outdoor Stand-Off Interrogation of Fissionable Material with a Hybrid Coded Imaging System

    Science.gov (United States)

    2013-06-01

    OUTDOOR STAND-OFF INTERROGATION OF FISSIONABLE MATERIAL WITH A HYBRID CODED IMAGING SYSTEM  A.L. Hutcheson  , B.F. Phlips, E.A. Wulf ...of the Hermes-III gamma ray simulator,” in Pulsed Power Conference, 1989. 7 th , 1898, p. 26. [5] E.A. Wulf , A.L. Hutcheson, B.F. Phlips, L.J

  8. A Monte Carlo Code for Relativistic Radiation Transport Around Kerr Black Holes

    Science.gov (United States)

    Schnittman, Jeremy David; Krolik, Julian H.

    2013-01-01

    We present a new code for radiation transport around Kerr black holes, including arbitrary emission and absorption mechanisms, as well as electron scattering and polarization. The code is particularly useful for analyzing accretion flows made up of optically thick disks and optically thin coronae. We give a detailed description of the methods employed in the code and also present results from a number of numerical tests to assess its accuracy and convergence.

  9. Hybrid methodology for hourly global radiation forecasting in Mediterranean area

    CERN Document Server

    Voyant, Cyril; Paoli, Christophe; Nivet, Marie Laure

    2012-01-01

    The renewable energies prediction and particularly global radiation forecasting is a challenge studied by a growing number of research teams. This paper proposes an original technique to model the insolation time series based on combining Artificial Neural Network (ANN) and Auto-Regressive and Moving Average (ARMA) model. While ANN by its non-linear nature is effective to predict cloudy days, ARMA techniques are more dedicated to sunny days without cloud occurrences. Thus, three hybrids models are suggested: the first proposes simply to use ARMA for 6 months in spring and summer and to use an optimized ANN for the other part of the year; the second model is equivalent to the first but with a seasonal learning; the last model depends on the error occurred the previous hour. These models were used to forecast the hourly global radiation for five places in Mediterranean area. The forecasting performance was compared among several models: the 3 above mentioned models, the best ANN and ARMA for each location. In t...

  10. Computer codes in nuclear safety, radiation transport and dosimetry; Les codes de calcul en radioprotection, radiophysique et dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    Bordy, J.M.; Kodeli, I.; Menard, St.; Bouchet, J.L.; Renard, F.; Martin, E.; Blazy, L.; Voros, S.; Bochud, F.; Laedermann, J.P.; Beaugelin, K.; Makovicka, L.; Quiot, A.; Vermeersch, F.; Roche, H.; Perrin, M.C.; Laye, F.; Bardies, M.; Struelens, L.; Vanhavere, F.; Gschwind, R.; Fernandez, F.; Quesne, B.; Fritsch, P.; Lamart, St.; Crovisier, Ph.; Leservot, A.; Antoni, R.; Huet, Ch.; Thiam, Ch.; Donadille, L.; Monfort, M.; Diop, Ch.; Ricard, M

    2006-07-01

    The purpose of this conference was to describe the present state of computer codes dedicated to radiation transport or radiation source assessment or dosimetry. The presentations have been parted into 2 sessions: 1) methodology and 2) uses in industrial or medical or research domains. It appears that 2 different calculation strategies are prevailing, both are based on preliminary Monte-Carlo calculations with data storage. First, quick simulations made from a database of particle histories built though a previous Monte-Carlo simulation and secondly, a neuronal approach involving a learning platform generated through a previous Monte-Carlo simulation. This document gathers the slides of the presentations.

  11. The Hybrid Detailed / Statistical Opacity Code SCO-RCG: New Developments and Applications

    CERN Document Server

    Pain, Jean-Christophe; Porcherot, Quentin; Blenski, Thomas

    2013-01-01

    We present the hybrid opacity code SCO-RCG which combines statistical approaches with fine-structure calculations. Radial integrals needed for the computation of detailed transition arrays are calculated by the code SCO (Super-configuration Code for Opacity), which calculates atomic structure at finite temperature and density, taking into account plasma effects on the wave-functions. Levels and spectral lines are then computed by an adapted RCG routine of R. D. Cowan. SCO-RCG now includes the Partially Resolved Transition Array model, which allows one to replace a complex transition array by a small-scale detailed calculation preserving energy and variance of the genuine transition array and yielding improved high-order moments. An approximate method for studying the impact of strong magnetic field on opacity and emissivity was also recently implemented.

  12. Bio-bar-code functionalized magnetic nanoparticle label for ultrasensitive flow injection chemiluminescence detection of DNA hybridization.

    Science.gov (United States)

    Bi, Sai; Zhou, Hong; Zhang, Shusheng

    2009-10-07

    A signal amplification strategy based on bio-bar-code functionalized magnetic nanoparticles as labels holds promise to improve the sensitivity and detection limit of the detection of DNA hybridization and single-nucleotide polymorphisms by flow injection chemiluminescence assays.

  13. Radiation and confinement in 0D fusion systems codes

    Science.gov (United States)

    Lux, H.; Kemp, R.; Fable, E.; Wenninger, R.

    2016-07-01

    In systems modelling for fusion power plants, it is essential to robustly predict the performance of a given machine design (including its respective operating scenario). One measure of machine performance is the energy confinement time {τ\\text{E}} that is typically predicted from experimentally derived confinement scaling laws (e.g. IPB98(y,2)). However, the conventionally used scaling laws have been derived for ITER which—unlike a fusion power plant—will not have significant radiation inside the separatrix. In the absence of a new high core radiation relevant confinement scaling, we propose an ad hoc correction to the loss power {{P}\\text{L}} used in the ITER confinement scaling and the calculation of the stored energy {{W}\\text{th}} by the radiation losses from the ‘core’ of the plasma {{P}\\text{rad,\\text{core}}} . Using detailed ASTRA / TGLF simulations, we find that an appropriate definition of {{P}\\text{rad,\\text{core}}} is given by 60% of all radiative losses inside a normalised minor radius {ρ\\text{core}}=0.75 . We consider this an improvement for current design predictions, but it is far from an ideal solution. We therefore encourage more detailed experimental and theoretical work on this issue.

  14. General Relativistic Radiative Transfer Code in Rotating Black Hole Spacetime: {ARTIST}

    Science.gov (United States)

    Takahashi, Rohta; Umemura, Masayuki

    2016-10-01

    We present a general relativistic radiative transfer code, {ARTIST} (Authentic Radiative Transfer In Space-Time), which is a perfectly causal scheme to pursue the propagation of radiation with absorption and scattering around a Kerr black hole. The code explicitly solves the invariant radiation intensity along null geodesics in the Kerr-Schild coordinates, and therefore properly includes light bending, Doppler boosting, frame dragging, and gravitational redshifts. The notable aspect of {ARTIST} is that it conserves the radiative energy with high accuracy, and is not subject to the numerical diffusion, since the transfer is solved on long characteristics along null geodesics. We first solve the wavefront propagation around a Kerr black hole, which was originally explored by Hanni (1977). This demonstrates repeated wavefront collisions, light bending, and causal propagation of radiation with the speed of light. We show that the decay rate of the total energy of wavefronts near a black hole is determined solely by the black hole spin in late phases, in agreement with analytic expectations. As a result, the {ARTIST} turns out to correctly solve the general relativistic radiation fields until late phases as t ˜ 90M. We also explore the effects of absorption and scattering, and apply this code for a photon wall problem and an orbiting hot spot problem. All the simulations in the present study are performed in the equatorial plane around a Kerr black hole. The {ARTIST} is the first step to realize the general relativistic radiation hydrodynamics.

  15. General relativistic radiative transfer code in rotating black hole space-time: ARTIST

    Science.gov (United States)

    Takahashi, Rohta; Umemura, Masayuki

    2017-02-01

    We present a general relativistic radiative transfer code, ARTIST (Authentic Radiative Transfer In Space-Time), that is a perfectly causal scheme to pursue the propagation of radiation with absorption and scattering around a Kerr black hole. The code explicitly solves the invariant radiation intensity along null geodesics in the Kerr-Schild coordinates, and therefore properly includes light bending, Doppler boosting, frame dragging, and gravitational redshifts. The notable aspect of ARTIST is that it conserves the radiative energy with high accuracy, and is not subject to the numerical diffusion, since the transfer is solved on long characteristics along null geodesics. We first solve the wavefront propagation around a Kerr black hole that was originally explored by Hanni. This demonstrates repeated wavefront collisions, light bending, and causal propagation of radiation with the speed of light. We show that the decay rate of the total energy of wavefronts near a black hole is determined solely by the black hole spin in late phases, in agreement with analytic expectations. As a result, the ARTIST turns out to correctly solve the general relativistic radiation fields until late phases as t ˜ 90 M. We also explore the effects of absorption and scattering, and apply this code for a photon wall problem and an orbiting hotspot problem. All the simulations in this study are performed in the equatorial plane around a Kerr black hole. The ARTIST is the first step to realize the general relativistic radiation hydrodynamics.

  16. Heat transfer performance characteristics of hybrid nanofluids as coolant in louvered fin automotive radiator

    Science.gov (United States)

    Sahoo, Rashmi R.; Sarkar, Jahar

    2016-12-01

    Present study deals with the enhancement of convective heat transfer performance of EG brine based various hybrid nanofluids i.e. Ag, Cu, SiC, CuO and TiO2 in 0-1% volume fraction of Al2O3 nanofluid, as coolants for louvered fin automobile radiator. The effects of nanoparticles combination and operating parameters on thermo physical properties, heat transfer, effectiveness, pumping power and performance index of hybrid nanofluids have been evaluated. Comparison of studied hybrid nanofluids based on radiator size and pumping power has been made as well. Among all studied hybrid nanofluids, 1% Ag hybrid nanofluid (0.5% Ag and 0.5% Al2O3) yields highest effectiveness and heat transfer rate as well as pumping power. However, SiC + Al2O3 dispersed hybrid nanofluid yields maximum performance index and hence this can be recommended for best coolant. For the same radiator size and heat transfer rate, pumping power increases by using Ag hybrid nanofluids leading to increase in engine thermal efficiency and hence reduction in engine fuel consumption. For same coolant flow rate and heat transfer rate, the radiator size reduces and pumping power increases by using Ag hybrid nanofluids leading to reduction in radiator size, weight and cost.

  17. Heat transfer performance characteristics of hybrid nanofluids as coolant in louvered fin automotive radiator

    Science.gov (United States)

    Sahoo, Rashmi R.; Sarkar, Jahar

    2017-06-01

    Present study deals with the enhancement of convective heat transfer performance of EG brine based various hybrid nanofluids i.e. Ag, Cu, SiC, CuO and TiO2 in 0-1% volume fraction of Al2O3 nanofluid, as coolants for louvered fin automobile radiator. The effects of nanoparticles combination and operating parameters on thermo physical properties, heat transfer, effectiveness, pumping power and performance index of hybrid nanofluids have been evaluated. Comparison of studied hybrid nanofluids based on radiator size and pumping power has been made as well. Among all studied hybrid nanofluids, 1% Ag hybrid nanofluid (0.5% Ag and 0.5% Al2O3) yields highest effectiveness and heat transfer rate as well as pumping power. However, SiC + Al2O3 dispersed hybrid nanofluid yields maximum performance index and hence this can be recommended for best coolant. For the same radiator size and heat transfer rate, pumping power increases by using Ag hybrid nanofluids leading to increase in engine thermal efficiency and hence reduction in engine fuel consumption. For same coolant flow rate and heat transfer rate, the radiator size reduces and pumping power increases by using Ag hybrid nanofluids leading to reduction in radiator size, weight and cost.

  18. Production Level CFD Code Acceleration for Hybrid Many-Core Architectures

    Science.gov (United States)

    Duffy, Austen C.; Hammond, Dana P.; Nielsen, Eric J.

    2012-01-01

    In this work, a novel graphics processing unit (GPU) distributed sharing model for hybrid many-core architectures is introduced and employed in the acceleration of a production-level computational fluid dynamics (CFD) code. The latest generation graphics hardware allows multiple processor cores to simultaneously share a single GPU through concurrent kernel execution. This feature has allowed the NASA FUN3D code to be accelerated in parallel with up to four processor cores sharing a single GPU. For codes to scale and fully use resources on these and the next generation machines, codes will need to employ some type of GPU sharing model, as presented in this work. Findings include the effects of GPU sharing on overall performance. A discussion of the inherent challenges that parallel unstructured CFD codes face in accelerator-based computing environments is included, with considerations for future generation architectures. This work was completed by the author in August 2010, and reflects the analysis and results of the time.

  19. Using hybrid implicit Monte Carlo diffusion to simulate gray radiation hydrodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Cleveland, Mathew A., E-mail: cleveland7@llnl.gov; Gentile, Nick

    2015-06-15

    This work describes how to couple a hybrid Implicit Monte Carlo Diffusion (HIMCD) method with a Lagrangian hydrodynamics code to evaluate the coupled radiation hydrodynamics equations. This HIMCD method dynamically applies Implicit Monte Carlo Diffusion (IMD) [1] to regions of a problem that are opaque and diffusive while applying standard Implicit Monte Carlo (IMC) [2] to regions where the diffusion approximation is invalid. We show that this method significantly improves the computational efficiency as compared to a standard IMC/Hydrodynamics solver, when optically thick diffusive material is present, while maintaining accuracy. Two test cases are used to demonstrate the accuracy and performance of HIMCD as compared to IMC and IMD. The first is the Lowrie semi-analytic diffusive shock [3]. The second is a simple test case where the source radiation streams through optically thin material and heats a thick diffusive region of material causing it to rapidly expand. We found that HIMCD proves to be accurate, robust, and computationally efficient for these test problems.

  20. Using k-alpha emission to determine fast electron spectra using the Hybrid code ZEPHYROS

    CERN Document Server

    White, Thomas; Gregori, Gianluca

    2014-01-01

    A high intensity laser-solid interaction invariably drives a non-thermal fast electron current through the target, however characterizing these fast electron distributions can prove difficult. An understanding of how these electrons propagate through dense materials is of fundamental interest and has applications relevant to fast ignition schemes and ion acceleration. Here, we utilize an upgraded version of the Hybrid code ZEPHYROS to demonstrate how the resulting k-alpha emission from such an interaction can be used as a diagnostic to obtain the characteristic temperature, divergence and total energy of the fast electron population.

  1. Radiative transfer codes for atmospheric correction and aerosol retrieval: intercomparison study.

    Science.gov (United States)

    Kotchenova, Svetlana Y; Vermote, Eric F; Levy, Robert; Lyapustin, Alexei

    2008-05-01

    Results are summarized for a scientific project devoted to the comparison of four atmospheric radiative transfer codes incorporated into different satellite data processing algorithms, namely, 6SV1.1 (second simulation of a satellite signal in the solar spectrum, vector, version 1.1), RT3 (radiative transfer), MODTRAN (moderate resolution atmospheric transmittance and radiance code), and SHARM (spherical harmonics). The performance of the codes is tested against well-known benchmarks, such as Coulson's tabulated values and a Monte Carlo code. The influence of revealed differences on aerosol optical thickness and surface reflectance retrieval is estimated theoretically by using a simple mathematical approach. All information about the project can be found at http://rtcodes.ltdri.org.

  2. Rate-prediction structure complexity analysis for multi-view video coding using hybrid genetic algorithms

    Science.gov (United States)

    Liu, Yebin; Dai, Qionghai; You, Zhixiang; Xu, Wenli

    2007-01-01

    Efficient exploitation of the temporal and inter-view correlation is critical to multi-view video coding (MVC), and the key to it relies on the design of prediction chain structure according to the various pattern of correlations. In this paper, we propose a novel prediction structure model to design optimal MVC coding schemes along with tradeoff analysis in depth between compression efficiency and prediction structure complexity for certain standard functionalities. Focusing on the representation of the entire set of possible chain structures rather than certain typical ones, the proposed model can given efficient MVC schemes that adaptively vary with the requirements of structure complexity and video source characteristics (the number of views, the degrees of temporal and interview correlations). To handle large scale problem in model optimization, we deploy a hybrid genetic algorithm which yields satisfactory results shown in the simulations.

  3. A Network Coding Based Hybrid ARQ Protocol for Underwater Acoustic Sensor Networks.

    Science.gov (United States)

    Wang, Hao; Wang, Shilian; Zhang, Eryang; Zou, Jianbin

    2016-01-01

    Underwater Acoustic Sensor Networks (UASNs) have attracted increasing interest in recent years due to their extensive commercial and military applications. However, the harsh underwater channel causes many challenges for the design of reliable underwater data transport protocol. In this paper, we propose an energy efficient data transport protocol based on network coding and hybrid automatic repeat request (NCHARQ) to ensure reliability, efficiency and availability in UASNs. Moreover, an adaptive window length estimation algorithm is designed to optimize the throughput and energy consumption tradeoff. The algorithm can adaptively change the code rate and can be insensitive to the environment change. Extensive simulations and analysis show that NCHARQ significantly reduces energy consumption with short end-to-end delay.

  4. A Network Coding Based Hybrid ARQ Protocol for Underwater Acoustic Sensor Networks

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2016-09-01

    Full Text Available Underwater Acoustic Sensor Networks (UASNs have attracted increasing interest in recent years due to their extensive commercial and military applications. However, the harsh underwater channel causes many challenges for the design of reliable underwater data transport protocol. In this paper, we propose an energy efficient data transport protocol based on network coding and hybrid automatic repeat request (NCHARQ to ensure reliability, efficiency and availability in UASNs. Moreover, an adaptive window length estimation algorithm is designed to optimize the throughput and energy consumption tradeoff. The algorithm can adaptively change the code rate and can be insensitive to the environment change. Extensive simulations and analysis show that NCHARQ significantly reduces energy consumption with short end-to-end delay.

  5. A Network Coding Based Hybrid ARQ Protocol for Underwater Acoustic Sensor Networks

    Science.gov (United States)

    Wang, Hao; Wang, Shilian; Zhang, Eryang; Zou, Jianbin

    2016-01-01

    Underwater Acoustic Sensor Networks (UASNs) have attracted increasing interest in recent years due to their extensive commercial and military applications. However, the harsh underwater channel causes many challenges for the design of reliable underwater data transport protocol. In this paper, we propose an energy efficient data transport protocol based on network coding and hybrid automatic repeat request (NCHARQ) to ensure reliability, efficiency and availability in UASNs. Moreover, an adaptive window length estimation algorithm is designed to optimize the throughput and energy consumption tradeoff. The algorithm can adaptively change the code rate and can be insensitive to the environment change. Extensive simulations and analysis show that NCHARQ significantly reduces energy consumption with short end-to-end delay. PMID:27618044

  6. Hybrid Codes Needed for Coordination over the Point-to-Point Channel

    CERN Document Server

    Cuff, Paul

    2011-01-01

    We consider a new fundamental question regarding the point-to-point memoryless channel. The source-channel separation theorem indicates that random codebook construction for lossy source compression and channel coding can be independently constructed and paired to achieve optimal performance for coordinating a source sequence with a reconstruction sequence. But what if we want the channel input to also be coordinated with the source and reconstruction? Such situations arise in network communication problems, where the correlation inherent in the information sources can be used to correlate channel inputs. Hybrid codes have been shown to be useful in a number of network communication problems. In this work we highlight their advantages over purely digital codebook construction by applying them to the point-to-point setting, coordinating both the channel input and the reconstruction with the source.

  7. A radiation hybrid map of chromosome ID reveals synteny conservation at a wheat speciation locus.

    Science.gov (United States)

    The species cytoplasm specific (scs) genes affect nuclear-cytoplasmic interactions in interspecific hybrids. A radiation hybrid (RH) mapping population of 188 individuals was employed to refine the location of the scsae locus of Tritcum aestivum chromosome 1D. ‘Wheat Zapper’, a comparative genomic...

  8. Radiation use efficiency, biomass production, and grain yield in two maize hybrids differing in drought tolerance

    Science.gov (United States)

    Drought tolerant (DT) maize (Zea mays L.) hybrids have potential to increase yield under drought conditions. However, little information is known about the physiological determinations of yield in DT hybrids. Our objective was to assess radiation use efficiency (RUE), biomass production, and yield ...

  9. Lower Hybrid Current Drive and Heating for the National Transport Code Collaboration

    Science.gov (United States)

    Ignat, D. W.; Jardin, S. C.; McCune, D. C.; Valeo, E. J.

    2000-10-01

    The Lower hybrid Simulation Code LSC was originally written as a subroutine to the Toroidal Simulation Code TSC (Jardin, Pomphrey, Kessel, et al) and subsequently ported to a subroutine of TRANSP. Modifications to simplify the use of the LSC both as a callable module, and also independently of larger transport codes, and improve the documentation have been undertaken with the goal of installing LSC in the NTCC library. The physical model, which includes ray tracing from a Brambilla spectrum, 1D Fokker-Planck development of the electron distribution, the Karney-Fisch treatment of the electric field, heuristic diffusion of current and power and wall scattering, has not been changed. The computational approach is to suppress or remove from the control of the user numerical parameters such as step size and number of iterations while changing some code to be extremely stable in varied conditions. Essential graphics are now output as gnuplot commands and data for off-line post processing, but the original outputs to sglib are retained as an option. Examples of output are shown.

  10. A multigroup radiation diffusion test problem: Comparison of code results with analytic solution

    Energy Technology Data Exchange (ETDEWEB)

    Shestakov, A I; Harte, J A; Bolstad, J H; Offner, S R

    2006-12-21

    We consider a 1D, slab-symmetric test problem for the multigroup radiation diffusion and matter energy balance equations. The test simulates diffusion of energy from a hot central region. Opacities vary with the cube of the frequency and radiation emission is given by a Wien spectrum. We compare results from two LLNL codes, Raptor and Lasnex, with tabular data that define the analytic solution.

  11. Hybrid optical-digital encryption system based on wavefront coding paradigm

    Science.gov (United States)

    Konnik, Mikhail V.

    2012-04-01

    The wavefront coding is a widely used in the optical systems to compensate aberrations and increase the depth of field. This paper presents experimental results on application of the wavefront coding paradigm for data encryption. We use a synthesised diffractive optical element (DOE) to deliberately introduce a phase distortion during the images registration process to encode the acquired image. In this case, an optical convolution of the input image with the point spread function (PSF) of the DOE is registered. The encryption is performed optically, and is therefore is fast and secure. Since the introduced distortion is the same across the image, the decryption is performed digitally using deconvolution methods. However, due to noise and finite accuracy of a photosensor, the reconstructed image is degraded but still readable. The experimental results, which are presented in this paper, indicate that the proposed hybrid optical-digital system can be implemented as a portable device using inexpensive off-the-shelf components. We present the results of optical encryption and digital restoration with quantitative estimations of the images quality. Details of hardware optical implementation of the hybrid optical-digital encryption system are discussed.

  12. Hybrid threshold adaptable quantum secret sharing scheme with reverse Huffman-Fibonacci-tree coding

    Science.gov (United States)

    Lai, Hong; Zhang, Jun; Luo, Ming-Xing; Pan, Lei; Pieprzyk, Josef; Xiao, Fuyuan; Orgun, Mehmet A.

    2016-08-01

    With prevalent attacks in communication, sharing a secret between communicating parties is an ongoing challenge. Moreover, it is important to integrate quantum solutions with classical secret sharing schemes with low computational cost for the real world use. This paper proposes a novel hybrid threshold adaptable quantum secret sharing scheme, using an m-bonacci orbital angular momentum (OAM) pump, Lagrange interpolation polynomials, and reverse Huffman-Fibonacci-tree coding. To be exact, we employ entangled states prepared by m-bonacci sequences to detect eavesdropping. Meanwhile, we encode m-bonacci sequences in Lagrange interpolation polynomials to generate the shares of a secret with reverse Huffman-Fibonacci-tree coding. The advantages of the proposed scheme is that it can detect eavesdropping without joint quantum operations, and permits secret sharing for an arbitrary but no less than threshold-value number of classical participants with much lower bandwidth. Also, in comparison with existing quantum secret sharing schemes, it still works when there are dynamic changes, such as the unavailability of some quantum channel, the arrival of new participants and the departure of participants. Finally, we provide security analysis of the new hybrid quantum secret sharing scheme and discuss its useful features for modern applications.

  13. Evaluation of the ECHAM family radiation codes performance in the representation of the solar signal

    Directory of Open Access Journals (Sweden)

    T. Sukhodolov

    2014-02-01

    Full Text Available Solar radiation is the main source of energy for the Earth's atmosphere and in many respects defines its composition, photochemistry, temperature profile and dynamics. The magnitude of the solar irradiance variability strongly depends on the wavelength making difficult its representation in climate models. Due to some deficiencies of the applied radiation codes several models fail to show a clear response in middle stratospheric heating rates to solar spectral irradiance variability, therefore it is important to prove reasonable model performance in this respect before doing multiple model runs. In this work we evaluate the performance of three generations of ECHAM (4, 5 and 6 radiation schemes by comparison with the reference high resolution libRadtran code. We found that both original ECHAM5 and 6 solar radiation codes miss almost all solar signal in the heating rates in the mesosphere. In the stratosphere ECHAM5 code reproduces only about a half of the reference signal, while representation of ECHAM6 code is better – it maximally misses about 17% in the upper stratosphere. On the basis of the comparison results we suggest necessary improvements of the ECHAM family codes by inclusion of available parameterizations of the heating rate due to absorption by oxygen (O2 and ozone (O3. Both codes with the introduced parameterizations represent the heating rate response to the spectral solar irradiance variability simulated with libRadtran much better without substantial increase of computer time. The suggested parameterizations are recommended to apply in the middle atmosphere version of the ECHAM-5 and 6 models for the study of the solar irradiance influence on climate.

  14. An improved treatment of radiation energy flow in the radiation-hydrodynamics code CHARTD

    Energy Technology Data Exchange (ETDEWEB)

    Rottler, J.S.

    1987-05-01

    An improved treatment of radiation transport has been added to the energy flow model in CHARTD. The new energy flow model was derived based on the assumption that the directional dependence of the radiation energy density can be represented by the first two terms of a spherical harmonic expansion, and that the photon energy spectrum can be partitioned into energy groups. This treatment of radiation transport is called the multigroup P-1 approximation, and is an effective description of radiation transport for a broad class of radiation-hydrodynamics problems. A synthetic acceleration scheme is used to solve the differenced multigroup P-1 equations. The coupling between the material field and the radiation field is fully explicit. This report describes the new energy flow model and the acceleration scheme used to solve the difference equations. 15 refs.

  15. Generation of ordinary mode electromagnetic radiation near the upper hybrid frequency in the magnetosphere

    Science.gov (United States)

    Ashour-Abdalla, M.; Okuda, H.

    1984-01-01

    It is shown by means of plasma numerical simulations that long-wavelength ordinary mode electromagnetic radiation can be generated from short-wavelength electrostatic waves near the upper hybrid resonance frequency in an inhomogeneous plasma. A possible relation of this process to nonthermal continuum radiation in the magnetosphere is discussed.

  16. Creation and utilization of a World Wide Web based space radiation effects code: SIREST

    Science.gov (United States)

    Singleterry, R. C. Jr; Wilson, J. W.; Shinn, J. L.; Tripathi, R. K.; Thibeault, S. A.; Noor, A. K.; Cucinotta, F. A.; Badavi, F. F.; Chang, C. K.; Qualls, G. D.; Clowdsley, M. S.; Kim, M. H.; Heinbockel, J. H.; Norbury, J.; Blattning, S. R.; Miller, J.; Zeitlin, C.; Heilbronn, L. H.

    2001-01-01

    In order for humans and electronics to fully and safely operate in the space environment, codes like HZETRN (High Charge and Energy Transport) must be included in any designer's toolbox for design evaluation with respect to radiation damage. Currently, spacecraft designers do not have easy access to accurate radiation codes like HZETRN to evaluate their design for radiation effects on humans and electronics. Today, the World Wide Web is sophisticated enough to support the entire HZETRN code and all of the associated pre and post processing tools. This package is called SIREST (Space Ionizing Radiation Effects and Shielding Tools). There are many advantages to SIREST. The most important advantage is the instant update capability of the web. Another major advantage is the modularity that the web imposes on the code. Right now, the major disadvantage of SIREST will be its modularity inside the designer's system. This mostly comes from the fact that a consistent interface between the designer and the computer system to evaluate the design is incomplete. This, however, is to be solved in the Intelligent Synthesis Environment (ISE) program currently being funded by NASA.

  17. Development of a space radiation Monte Carlo computer simulation based on the FLUKA and ROOT codes

    CERN Document Server

    Pinsky, L; Ferrari, A; Sala, P; Carminati, F; Brun, R

    2001-01-01

    This NASA funded project is proceeding to develop a Monte Carlo-based computer simulation of the radiation environment in space. With actual funding only initially in place at the end of May 2000, the study is still in the early stage of development. The general tasks have been identified and personnel have been selected. The code to be assembled will be based upon two major existing software packages. The radiation transport simulation will be accomplished by updating the FLUKA Monte Carlo program, and the user interface will employ the ROOT software being developed at CERN. The end-product will be a Monte Carlo-based code which will complement the existing analytic codes such as BRYNTRN/HZETRN presently used by NASA to evaluate the effects of radiation shielding in space. The planned code will possess the ability to evaluate the radiation environment for spacecraft and habitats in Earth orbit, in interplanetary space, on the lunar surface, or on a planetary surface such as Mars. Furthermore, it will be usef...

  18. Acceleration of the Geostatistical Software Library (GSLIB) by code optimization and hybrid parallel programming

    Science.gov (United States)

    Peredo, Oscar; Ortiz, Julián M.; Herrero, José R.

    2015-12-01

    The Geostatistical Software Library (GSLIB) has been used in the geostatistical community for more than thirty years. It was designed as a bundle of sequential Fortran codes, and today it is still in use by many practitioners and researchers. Despite its widespread use, few attempts have been reported in order to bring this package to the multi-core era. Using all CPU resources, GSLIB algorithms can handle large datasets and grids, where tasks are compute- and memory-intensive applications. In this work, a methodology is presented to accelerate GSLIB applications using code optimization and hybrid parallel processing, specifically for compute-intensive applications. Minimal code modifications are added decreasing as much as possible the elapsed time of execution of the studied routines. If multi-core processing is available, the user can activate OpenMP directives to speed up the execution using all resources of the CPU. If multi-node processing is available, the execution is enhanced using MPI messages between the compute nodes.Four case studies are presented: experimental variogram calculation, kriging estimation, sequential gaussian and indicator simulation. For each application, three scenarios (small, large and extra large) are tested using a desktop environment with 4 CPU-cores and a multi-node server with 128 CPU-nodes. Elapsed times, speedup and efficiency results are shown.

  19. SKIRT: an Advanced Dust Radiative Transfer Code with a User-Friendly Architecture

    CERN Document Server

    Camps, Peter

    2014-01-01

    We discuss the architecture and design principles that underpin the latest version of SKIRT, a state-of-the-art open source code for simulating continuum radiation transfer in dusty astrophysical systems, such as spiral galaxies and accretion disks. SKIRT employs the Monte Carlo technique to emulate the relevant physical processes including scattering, absorption and emission by the dust. The code features a wealth of built-in geometries, radiation source spectra, dust characterizations, dust grids, and detectors, in addition to various mechanisms for importing snapshots generated by hydrodynamical simulations. The configuration for a particular simulation is defined at run-time through a user-friendly interface suitable for both occasional and power users. These capabilities are enabled by careful C++ code design. The programming interfaces between components are well defined and narrow. Adding a new feature is usually as simple as adding another class; the user interface automatically adjusts to allow confi...

  20. TAU: A 1D radiative transfer code for transmission spectroscopy of extrasolar planet atmospheres

    CERN Document Server

    Hollis, M D J; Tinetti, G

    2013-01-01

    The TAU code is a 1D line-by-line radiative transfer code, which is generally applicable for modelling transmission spectra of close-in extrasolar planets. The inputs are the assumed pressure-temperature profile of the planetary atmosphere, the continuum absorption coefficients and the absorption cross-sections for the trace molecular absorbers present in the model, as well as the fundamental system parameters taken from the published literature. The program then calculates the optical path through the planetary atmosphere of the radiation from the host star, and quantifies the absorption due to the modelled composition in a transmission spectrum of transit depth as a function of wavelength. The code is written in C++, parallelised using OpenMP, and is available for public download and use from http://www.ucl.ac.uk/exoplanets/.

  1. Construction of whole genome radiation hybrid panels and map of chromosome 5A of wheat using asymmetric somatic hybridization.

    Directory of Open Access Journals (Sweden)

    Chuanen Zhou

    Full Text Available To explore the feasibility of constructing a whole genome radiation hybrid (WGRH map in plant species with large genomes, asymmetric somatic hybridization between wheat (Triticum aestivum L. and Bupleurum scorzonerifolium Willd. was performed. The protoplasts of wheat were irradiated with ultraviolet light (UV and gamma-ray and rescued by protoplast fusion using B. scorzonerifolium as the recipient. Assessment of SSR markers showed that the radiation hybrids have the average marker retention frequency of 15.5%. Two RH panels (RHPWI and RHPWII that contained 92 and 184 radiation hybrids, respectively, were developed and used for mapping of 68 SSR markers in chromosome 5A of wheat. A total of 1557 and 2034 breaks were detected in each panel. The RH map of chromosome 5A based on RHPWII was constructed. The distance of the comprehensive map was 2103 cR and the approximate resolution was estimated to be ∼501.6 kb/break. The RH panels evaluated in this study enabled us to order the ESTs in a single deletion bin or in the multiple bins cross the chromosome. These results demonstrated that RH mapping via protoplast fusion is feasible at the whole genome level for mapping purposes in wheat and the potential value of this mapping approach for the plant species with large genomes.

  2. Design and Cost Performance of Decoding Technique for Hybrid Subcarrier Spectral Amplitude Coding-Optical Code Division Multiple Access System

    National Research Council Canada - National Science Library

    R. K.Z. Sahbudin; M. K. Abdullah; M. Mokhtar; S. Hitam; S. B.A. Anas

    2011-01-01

    ...) deploying the Khazani-Syed code was proposed. It was proposed as a mean of increasing the maximum number of simultaneous active users by increasing the subcarrier and/or the SAC-OCDMA code word...

  3. Development of a GPU Compatible Version of the Fast Radiation Code RRTMG

    Science.gov (United States)

    Iacono, M. J.; Mlawer, E. J.; Berthiaume, D.; Cady-Pereira, K. E.; Suarez, M.; Oreopoulos, L.; Lee, D.

    2012-12-01

    The absorption of solar radiation and emission/absorption of thermal radiation are crucial components of the physics that drive Earth's climate and weather. Therefore, accurate radiative transfer calculations are necessary for realistic climate and weather simulations. Efficient radiation codes have been developed for this purpose, but their accuracy requirements still necessitate that as much as 30% of the computational time of a GCM is spent computing radiative fluxes and heating rates. The overall computational expense constitutes a limitation on a GCM's predictive ability if it becomes an impediment to adding new physics to or increasing the spatial and/or vertical resolution of the model. The emergence of Graphics Processing Unit (GPU) technology, which will allow the parallel computation of multiple independent radiative calculations in a GCM, will lead to a fundamental change in the competition between accuracy and speed. Processing time previously consumed by radiative transfer will now be available for the modeling of other processes, such as physics parameterizations, without any sacrifice in the accuracy of the radiative transfer. Furthermore, fast radiation calculations can be performed much more frequently and will allow the modeling of radiative effects of rapid changes in the atmosphere. The fast radiation code RRTMG, developed at Atmospheric and Environmental Research (AER), is utilized operationally in many dynamical models throughout the world. We will present the results from the first stage of an effort to create a version of the RRTMG radiation code designed to run efficiently in a GPU environment. This effort will focus on the RRTMG implementation in GEOS-5. RRTMG has an internal pseudo-spectral vector of length of order 100 that, when combined with the much greater length of the global horizontal grid vector from which the radiation code is called in GEOS-5, makes RRTMG/GEOS-5 particularly suited to achieving a significant speed improvement

  4. Facile preparation of hybrid core-shell nanorods for photothermal and radiation combined therapy

    Science.gov (United States)

    Deng, Yaoyao; Li, Erdong; Cheng, Xiaju; Zhu, Jing; Lu, Shuanglong; Ge, Cuicui; Gu, Hongwei; Pan, Yue

    2016-02-01

    The hybrid platinum@iron oxide core-shell nanorods with high biocompatibility were synthesized and applied for combined therapy. These hybrid nanorods exhibit a good photothermal effect on cancer cells upon irradiation with a NIR laser. Furthermore, due to the presence of a high atomic number element (platinum core), the hybrid nanorods show a synergistic effect between photothermal and radiation therapy. Therefore, the as-prepared core-shell nanorods could play an important role in facilitating synergistic therapy between photothermal and radiation therapy to achieve better therapeutic efficacy.The hybrid platinum@iron oxide core-shell nanorods with high biocompatibility were synthesized and applied for combined therapy. These hybrid nanorods exhibit a good photothermal effect on cancer cells upon irradiation with a NIR laser. Furthermore, due to the presence of a high atomic number element (platinum core), the hybrid nanorods show a synergistic effect between photothermal and radiation therapy. Therefore, the as-prepared core-shell nanorods could play an important role in facilitating synergistic therapy between photothermal and radiation therapy to achieve better therapeutic efficacy. Electronic supplementary information (ESI) available: Details of general experimental procedures. See DOI: 10.1039/c5nr09102k

  5. HyCFS, a high-resolution shock capturing code for numerical simulation on hybrid computational clusters

    Science.gov (United States)

    Shershnev, Anton A.; Kudryavtsev, Alexey N.; Kashkovsky, Alexander V.; Khotyanovsky, Dmitry V.

    2016-10-01

    The present paper describes HyCFS code, developed for numerical simulation of compressible high-speed flows on hybrid CPU/GPU (Central Processing Unit / Graphical Processing Unit) computational clusters on the basis of full unsteady Navier-Stokes equations, using modern shock capturing high-order TVD (Total Variation Diminishing) and WENO (Weighted Essentially Non-Oscillatory) schemes on general curvilinear structured grids. We discuss the specific features of hybrid architecture and details of program implementation and present the results of code verification.

  6. Parallel Computing Characteristics of CUPID code under MPI and Hybrid environment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Ryong; Yoon, Han Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jeon, Byoung Jin; Choi, Hyoung Gwon [Seoul National Univ. of Science and Technology, Seoul (Korea, Republic of)

    2014-05-15

    In this paper, a characteristic of parallel algorithm is presented for solving an elliptic type equation of CUPID via domain decomposition method using the MPI and the parallel performance is estimated in terms of a scalability which shows the speedup ratio. In addition, the time-consuming pattern of major subroutines is studied. Two different grid systems are taken into account: 40,000 meshes for coarse system and 320,000 meshes for fine system. Since the matrix of the CUPID code differs according to whether the flow is single-phase or two-phase, the effect of matrix shape is evaluated. Finally, the effect of the preconditioner for matrix solver is also investigated. Finally, the hybrid (OpenMP+MPI) parallel algorithm is introduced and discussed in detail for solving pressure solver. Component-scale thermal-hydraulics code, CUPID has been developed for two-phase flow analysis, which adopts a three-dimensional, transient, three-field model, and parallelized to fulfill a recent demand for long-transient and highly resolved multi-phase flow behavior. In this study, the parallel performance of the CUPID code was investigated in terms of scalability. The CUPID code was parallelized with domain decomposition method. The MPI library was adopted to communicate the information at the neighboring domain. For managing the sparse matrix effectively, the CSR storage format is used. To take into account the characteristics of the pressure matrix which turns to be asymmetric for two-phase flow, both single-phase and two-phase calculations were run. In addition, the effect of the matrix size and preconditioning was also investigated. The fine mesh calculation shows better scalability than the coarse mesh because the number of coarse mesh does not need to decompose the computational domain excessively. The fine mesh can be present good scalability when dividing geometry with considering the ratio between computation and communication time. For a given mesh, single-phase flow

  7. Time-dependent Multi-group Multidimensional Relativistic Radiative Transfer Code Based On Spherical Harmonic Discrete Ordinate Method

    CERN Document Server

    Tominaga, Nozomu; Blinnikov, Sergei I

    2015-01-01

    We develop a time-dependent multi-group multidimensional relativistic radiative transfer code, which is required to numerically investigate radiation from relativistic fluids involved in, e.g., gamma-ray bursts and active galactic nuclei. The code is based on the spherical harmonic discrete ordinate method (SHDOM) that evaluates a source function including anisotropic scattering in spherical harmonics and implicitly solves the static radiative transfer equation with a ray tracing in discrete ordinates. We implement treatments of time dependence, multi-frequency bins, Lorentz transformation, and elastic Thomson and inelastic Compton scattering to the publicly available SHDOM code. Our code adopts a mixed frame approach; the source function is evaluated in the comoving frame whereas the radiative transfer equation is solved in the laboratory frame. This implementation is validated with various test problems and comparisons with results of a relativistic Monte Carlo code. These validations confirm that the code ...

  8. Application of hybrid coded genetic algorithm in fuzzy neural network controller

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Presents the fuzzy neural network optimized by hybrid coded genetic algorithm of decimal encoding and bi nary encoding, the searching ability and stability of genetic algorithms enhanced by using binary encoding during the crossover operation and decimal encoding during the mutation operation, and the way of accepting new individuals by probability adopted, by which a new individual is accepted and its parent is discarded when its fitness is higher than that of its parent, and a new individual is accepted by probability when its fitness is lower than that of its parent. And concludes with calculations made with an example that these improvements enhance the speed of genetic algorithms to optimize the fuzzy neural network controller.

  9. A public code for general relativistic, polarised radiative transfer around spinning black holes

    Science.gov (United States)

    Dexter, Jason

    2016-10-01

    Ray tracing radiative transfer is a powerful method for comparing theoretical models of black hole accretion flows and jets with observations. We present a public code, GRTRANS, for carrying out such calculations in the Kerr metric, including the full treatment of polarised radiative transfer and parallel transport along geodesics. The code is written in FORTRAN 90 and efficiently parallelises with OPENMP, and the full code and several components have PYTHON interfaces. We describe several tests which are used for verifiying the code, and we compare the results for polarised thin accretion disc and semi-analytic jet problems with those from the literature as examples of its use. Along the way, we provide accurate fitting functions for polarised synchrotron emission and transfer coefficients from thermal and power-law distribution functions, and compare results from numerical integration and quadrature solutions of the polarised radiative transfer equations. We also show that all transfer coefficients can play an important role in predicted images and polarisation maps of the Galactic centre black hole, Sgr A*, at submillimetre wavelengths.

  10. European Code against Cancer 4th Edition: Ionising and non-ionising radiation and cancer.

    Science.gov (United States)

    McColl, Neil; Auvinen, Anssi; Kesminiene, Ausrele; Espina, Carolina; Erdmann, Friederike; de Vries, Esther; Greinert, Rüdiger; Harrison, John; Schüz, Joachim

    2015-12-01

    Ionising radiation can transfer sufficient energy to ionise molecules, and this can lead to chemical changes, including DNA damage in cells. Key evidence for the carcinogenicity of ionising radiation comes from: follow-up studies of the survivors of the atomic bombings in Japan; other epidemiological studies of groups that have been exposed to radiation from medical, occupational or environmental sources; experimental animal studies; and studies of cellular responses to radiation. Considering exposure to environmental ionising radiation, inhalation of naturally occurring radon is the major source of radiation in the population - in doses orders of magnitude higher than those from nuclear power production or nuclear fallout. Indoor exposure to radon and its decay products is an important cause of lung cancer; radon may cause approximately one in ten lung cancers in Europe. Exposures to radon in buildings can be reduced via a three-step process of identifying those with potentially elevated radon levels, measuring radon levels, and reducing exposure by installation of remediation systems. In the 4th Edition of the European Code against Cancer it is therefore recommended to: "Find out if you are exposed to radiation from naturally high radon levels in your home. Take action to reduce high radon levels". Non-ionising types of radiation (those with insufficient energy to ionise molecules) - including extremely low-frequency electric and magnetic fields as well as radiofrequency electromagnetic fields - are not an established cause of cancer and are therefore not addressed in the recommendations to reduce cancer risk.

  11. A Fast Hybrid (3-D/1-D) Model for Thermal Radiative Transfer in Cirrus via Successive Orders of Scattering

    Science.gov (United States)

    Fauchez, Thomas; Davis, Anthony B.; Cornet, Celine; Szczap, Frederic; Platnick, Steven; Dubuisson, Philippe; Thieuleux, Francois

    2017-01-01

    We investigate the impact of cirrus cloud heterogeneity on the direct emission by cloud or surface and on the scattering by ice particles in the thermal infrared (TIR). Realistic 3-D cirri are modeled with the 3DCLOUD code, and top-of-atmosphere radiances are simulated by the 3-D Monte Carlo radiative transfer (RT) algorithm 3DMCPOL for two (8.65 micrometers and 12.05 micrometers) channels of the Imaging Infrared Radiometer on CALIPSO. At nadir, comparisons of 1-D and 3-D RT show that 3-D radiances are larger than their 1-D counterparts for direct emission but smaller for scattered radiation. For our cirrus cases, 99% of the 3-D total radiance is computed by the third scattering order, which corresponds to 90% of the total computational effort, but larger optical thicknesses need more scattering orders. To radically accelerate the 3-D RT computations (using only few percent of 3-D RT time with a Monte Carlo code), even in the presence of large optical depths, we develop a hybrid model based on exact 3-D direct emission, the first scattering order from 1-D in each homogenized column, and an empirical adjustment linearly dependent on the optical thickness to account for higher scattering orders. Good agreement is found between the hybrid model and the exact 3-D radiances for two very different cirrus models without changing the empirical parameters. We anticipate that a future deterministic implementation of the hybrid model will be fast enough to process multiangle thermal imagery in a practical tomographic reconstruction of 3-D cirrus fields.

  12. Simulation of high-energy radiation belt electron fluxes using NARMAX-VERB coupled codes.

    Science.gov (United States)

    Pakhotin, I P; Drozdov, A Y; Shprits, Y Y; Boynton, R J; Subbotin, D A; Balikhin, M A

    2014-10-01

    This study presents a fusion of data-driven and physics-driven methodologies of energetic electron flux forecasting in the outer radiation belt. Data-driven NARMAX (Nonlinear AutoRegressive Moving Averages with eXogenous inputs) model predictions for geosynchronous orbit fluxes have been used as an outer boundary condition to drive the physics-based Versatile Electron Radiation Belt (VERB) code, to simulate energetic electron fluxes in the outer radiation belt environment. The coupled system has been tested for three extended time periods totalling several weeks of observations. The time periods involved periods of quiet, moderate, and strong geomagnetic activity and captured a range of dynamics typical of the radiation belts. The model has successfully simulated energetic electron fluxes for various magnetospheric conditions. Physical mechanisms that may be responsible for the discrepancies between the model results and observations are discussed.

  13. A Radiation Chemistry Code Based on the Green's Function of the Diffusion Equation

    Science.gov (United States)

    Plante, Ianik; Wu, Honglu

    2014-01-01

    Stochastic radiation track structure codes are of great interest for space radiation studies and hadron therapy in medicine. These codes are used for a many purposes, notably for microdosimetry and DNA damage studies. In the last two decades, they were also used with the Independent Reaction Times (IRT) method in the simulation of chemical reactions, to calculate the yield of various radiolytic species produced during the radiolysis of water and in chemical dosimeters. Recently, we have developed a Green's function based code to simulate reversible chemical reactions with an intermediate state, which yielded results in excellent agreement with those obtained by using the IRT method. This code was also used to simulate and the interaction of particles with membrane receptors. We are in the process of including this program for use with the Monte-Carlo track structure code Relativistic Ion Tracks (RITRACKS). This recent addition should greatly expand the capabilities of RITRACKS, notably to simulate DNA damage by both the direct and indirect effect.

  14. Assessment of a Hybrid Continuous/Discontinuous Galerkin Finite Element Code for Geothermal Reservoir Simulations

    Science.gov (United States)

    Xia, Yidong; Podgorney, Robert; Huang, Hai

    2017-03-01

    FALCON (Fracturing And Liquid CONvection) is a hybrid continuous/discontinuous Galerkin finite element geothermal reservoir simulation code based on the MOOSE (Multiphysics Object-Oriented Simulation Environment) framework being developed and used for multiphysics applications. In the present work, a suite of verification and validation (V&V) test problems for FALCON was defined to meet the design requirements, and solved to the interests of enhanced geothermal system modeling and simulation. The intent for this test problem suite is to provide baseline comparison data that demonstrates the performance of FALCON solution methods. The test problems vary in complexity from a single mechanical or thermal process, to coupled thermo-hydro-mechanical processes in geological porous medium. Numerical results obtained by FALCON agreed well with either the available analytical solutions or experimental data, indicating the verified and validated implementation of these capabilities in FALCON. Whenever possible, some form of solution verification has been attempted to identify sensitivities in the solution methods, and suggest best practices when using the FALCON code.

  15. Semi-implicit scheme for treating radiation under M1 closure in general relativistic conservative fluid dynamics codes

    CERN Document Server

    Sdowski, Aleksander; Tchekhovskoy, Alexander; Zhu, Yucong

    2012-01-01

    A numerical scheme is described for including radiation in multi-dimensional general-relativistic conservative fluid dynamics codes. In this method, a covariant form of the M1 closure scheme is used to close the radiation moments, and the radiative source terms are treated semi-implicitly in order to handle both optically thin and optically thick regimes. The scheme has been implemented in a conservative general relativistic radiation hydrodynamics code KORAL. The robustness of the code is demonstrated on a number of test problems, including radiative relativistic shock tubes, static radiation pressure supported atmosphere, shadows, beams of light in curved spacetime, and radiative Bondi accretion. The advantages of M1 closure relative to other approaches such as Eddington closure and flux-limited diffusion are discussed, and its limitations are also highlighted.

  16. HyDEn: a hybrid steganocryptographic approach for data encryption using randomized error-correcting DNA codes.

    Science.gov (United States)

    Tulpan, Dan; Regoui, Chaouki; Durand, Guillaume; Belliveau, Luc; Léger, Serge

    2013-01-01

    This paper presents a novel hybrid DNA encryption (HyDEn) approach that uses randomized assignments of unique error-correcting DNA Hamming code words for single characters in the extended ASCII set. HyDEn relies on custom-built quaternary codes and a private key used in the randomized assignment of code words and the cyclic permutations applied on the encoded message. Along with its ability to detect and correct errors, HyDEn equals or outperforms existing cryptographic methods and represents a promising in silico DNA steganographic approach.

  17. Evaluation of Error-Correcting Codes for Radiation-Tolerant Memory

    Science.gov (United States)

    Jeon, S.; Vijaya Kumar, B. V. K.; Hwang, E.; Cheng, M. K.

    2010-05-01

    In space, radiation particles can introduce temporary or permanent errors in memory systems. To protect against potential memory faults, either thick shielding or error-correcting codes (ECC) are used by memory modules. Thick shielding translates into increased mass, and conventional ECCs designed for memories are typically capable of correcting only a single error and detecting a double error. Decoding is usually performed through hard decisions where bits are treated as either correct or flipped in polarity. We demonstrate that low-density parity-check (LDPC) codes that are already prevalent in many communication applications can also be used to protect memories in space. Because the achievable code rate monotonically decreases with time due to the accumulation of permanent errors, the achievable rate serves as a useful metric in designing an appropriate ECC. We describe how to compute soft symbol reliabilities on our channel and compare the performance of soft-decision decoding LDPC codes against conventional hard-decision decoding of Reed-Solomon (RS) codes and Bose-Chaudhuri-Hocquenghem (BCH) codes for a specific memory structure.

  18. Implementation of discrete transfer radiation method into swift computational fluid dynamics code

    Directory of Open Access Journals (Sweden)

    Baburić Mario

    2004-01-01

    Full Text Available The Computational Fluid Dynamics (CFD has developed into a powerful tool widely used in science, technology and industrial design applications, when ever fluid flow, heat transfer, combustion, or other complicated physical processes, are involved. During decades of development of CFD codes scientists were writing their own codes, that had to include not only the model of processes that were of interest, but also a whole spectrum of necessary CFD procedures, numerical techniques, pre-processing and post-processing. That has arrested much of the scientist effort in work that has been copied many times over, and was not actually producing the added value. The arrival of commercial CFD codes brought relief to many engineers that could now use the user-function approach for mod el ling purposes, en trusting the application to do the rest of the work. This pa per shows the implementation of Discrete Transfer Radiation Method into AVL’s commercial CFD code SWIFT with the help of user defined functions. Few standard verification test cases were per formed first, and in order to check the implementation of the radiation method it self, where the comparisons with available analytic solution could be performed. After wards, the validation was done by simulating the combustion in the experimental furnace at IJmuiden (Netherlands, for which the experimental measurements were available. The importance of radiation prediction in such real-size furnaces is proved again to be substantial, where radiation itself takes the major fraction of over all heat transfer. The oil-combustion model used in simulations was the semi-empirical one that has been developed at the Power Engineering Department, and which is suit able for a wide range of typical oil flames.

  19. HT-FRTC: a fast radiative transfer code using kernel regression

    Science.gov (United States)

    Thelen, Jean-Claude; Havemann, Stephan; Lewis, Warren

    2016-09-01

    The HT-FRTC is a principal component based fast radiative transfer code that can be used across the electromagnetic spectrum from the microwave through to the ultraviolet to calculate transmittance, radiance and flux spectra. The principal components cover the spectrum at a very high spectral resolution, which allows very fast line-by-line, hyperspectral and broadband simulations for satellite-based, airborne and ground-based sensors. The principal components are derived during a code training phase from line-by-line simulations for a diverse set of atmosphere and surface conditions. The derived principal components are sensor independent, i.e. no extra training is required to include additional sensors. During the training phase we also derive the predictors which are required by the fast radiative transfer code to determine the principal component scores from the monochromatic radiances (or fluxes, transmittances). These predictors are calculated for each training profile at a small number of frequencies, which are selected by a k-means cluster algorithm during the training phase. Until recently the predictors were calculated using a linear regression. However, during a recent rewrite of the code the linear regression was replaced by a Gaussian Process (GP) regression which resulted in a significant increase in accuracy when compared to the linear regression. The HT-FRTC has been trained with a large variety of gases, surface properties and scatterers. Rayleigh scattering as well as scattering by frozen/liquid clouds, hydrometeors and aerosols have all been included. The scattering phase function can be fully accounted for by an integrated line-by-line version of the Edwards-Slingo spherical harmonics radiation code or approximately by a modification to the extinction (Chou scaling).

  20. The radiation dose dilemma in the hybrid operating room

    NARCIS (Netherlands)

    de Ruiter, QMB

    2016-01-01

    The of the hybrid Operation room (an operation room combined with advanced radiological X-ray equipment) is gaining popularity, as it is now the preferred room to perform (complex) endovascular aortic procedures. The fixed C-arms equipped in these rooms make it possible to gain very high image

  1. The radiation dose dilemma in the hybrid operating room

    NARCIS (Netherlands)

    de Ruiter, QMB

    2016-01-01

    The of the hybrid Operation room (an operation room combined with advanced radiological X-ray equipment) is gaining popularity, as it is now the preferred room to perform (complex) endovascular aortic procedures. The fixed C-arms equipped in these rooms make it possible to gain very high image quali

  2. Performance of the dot product function in radiative transfer code SORD

    Science.gov (United States)

    Korkin, Sergey; Lyapustin, Alexei; Sinyuk, Aliaksandr; Holben, Brent

    2016-10-01

    The successive orders of scattering radiative transfer (RT) codes frequently call the scalar (dot) product function. In this paper, we study performance of some implementations of the dot product in the RT code SORD using 50 scenarios for light scattering in the atmosphere-surface system. In the dot product function, we use the unrolled loops technique with different unrolling factor. We also considered the intrinsic Fortran functions. We show results for two machines: ifort compiler under Windows, and pgf90 under Linux. Intrinsic DOT_PRODUCT function showed best performance for the ifort. For the pgf90, the dot product implemented with unrolling factor 4 was the fastest. The RT code SORD together with the interface that runs all the mentioned tests are publicly available from ftp://maiac.gsfc.nasa.gov/pub/skorkin/SORD_IP_16B (current release) or by email request from the corresponding (first) author.

  3. SKIRT: An advanced dust radiative transfer code with a user-friendly architecture

    Science.gov (United States)

    Camps, P.; Baes, M.

    2015-03-01

    We discuss the architecture and design principles that underpin the latest version of SKIRT, a state-of-the-art open source code for simulating continuum radiation transfer in dusty astrophysical systems, such as spiral galaxies and accretion disks. SKIRT employs the Monte Carlo technique to emulate the relevant physical processes including scattering, absorption and emission by the dust. The code features a wealth of built-in geometries, radiation source spectra, dust characterizations, dust grids, and detectors, in addition to various mechanisms for importing snapshots generated by hydrodynamical simulations. The configuration for a particular simulation is defined at run-time through a user-friendly interface suitable for both occasional and power users. These capabilities are enabled by careful C++ code design. The programming interfaces between components are well defined and narrow. Adding a new feature is usually as simple as adding another class; the user interface automatically adjusts to allow configuring the new options. We argue that many scientific codes, like SKIRT, can benefit from careful object-oriented design and from a friendly user interface, even if it is not a graphical user interface.

  4. Application of the new MultiTrans SP3 radiation transport code in BNCT dose planning.

    Science.gov (United States)

    Kotiluoto, P; Hiisamäki, P; Savolainen, S

    2001-09-01

    Dose planning in boron neutron capture therapy (BNCT) is a complex problem and requires sophisticated numerical methods. In the framework of the Finnish BNCT project, new deterministic three-dimensional radiation transport code MultiTrans SP3 has been developed at VTT Chemical Technology, based on a novel application of the tree multigrid technique. To test the applicability of this new code in a realistic BNCT dose planning problem, cylindrical PMMA (polymethyl-methacrylate) phantom was chosen as a benchmark case. It is a convenient benchmark, as it has been modeled by several different codes, including well-known DORT and MCNP. Extensive measured data also exist. In this paper, a comparison of the new MultiTrans SP3 code with other methods is presented for the PMMA phantom case. Results show that the total neutron dose rate to ICRU adult brain calculated by the MultiTrans SP3 code differs less than 4% in 2 cm depth in phantom (in thermal maximum) from the DORT calculation. Results also show that the calculated 197Au(n,gamma) and 55Mn(n,gamma) reaction rates in 2 cm depth in phantom differ less than 4% and 1% from the measured values, respectively. However, the photon dose calculated by the MultiTrans SP3 code seems to be incorrect in this PMMA phantom case, which requires further studying. As expected, the deterministic MultiTrans SP3 code is over an order of magnitude faster than stochastic Monte Carlo codes (with similar resolution), thus providing a very efficient tool for BNCT dose planning.

  5. Radiation Coupling with the FUN3D Unstructured-Grid CFD Code

    Science.gov (United States)

    Wood, William A.

    2012-01-01

    The HARA radiation code is fully-coupled to the FUN3D unstructured-grid CFD code for the purpose of simulating high-energy hypersonic flows. The radiation energy source terms and surface heat transfer, under the tangent slab approximation, are included within the fluid dynamic ow solver. The Fire II flight test, at the Mach-31 1643-second trajectory point, is used as a demonstration case. Comparisons are made with an existing structured-grid capability, the LAURA/HARA coupling. The radiative surface heat transfer rates from the present approach match the benchmark values within 6%. Although radiation coupling is the focus of the present work, convective surface heat transfer rates are also reported, and are seen to vary depending upon the choice of mesh connectivity and FUN3D ux reconstruction algorithm. On a tetrahedral-element mesh the convective heating matches the benchmark at the stagnation point, but under-predicts by 15% on the Fire II shoulder. Conversely, on a mixed-element mesh the convective heating over-predicts at the stagnation point by 20%, but matches the benchmark away from the stagnation region.

  6. Reanalysis and forecasting killer electrons in Earth's radiation belts using the VERB code

    Science.gov (United States)

    Kellerman, Adam; Kondrashov, Dmitri; Shprits, Yuri; Podladchikova, Tatiana; Drozdov, Alexander

    2016-07-01

    The Van Allen radiation belts are torii-shaped regions of trapped energetic particles, that in recent years, have become a principle focus for satellite operators and engineers. During geomagnetic storms, electrons can be accelerated up to relativistic energies, where they may penetrate spacecraft shielding and damage electrical systems, causing permanent damage or loss of spacecraft. Data-assimilation provides an optimal way to combine observations of the radiation belts with a physics-based model in order to more accurately specify the global state of the Earth's radiation belts. We present recent advances to the data-assimilative version of the Versatile Electron Radiation Belt (VERB) code, including more sophisticated error analysis, and incorporation of realistic field-models to more accurately specify fluxes at a given MLT or along a spacecraft trajectory. The effect of recent stream-interaction-region (SIR) driven enhancements are investigated using the improved model. We also present a real-time forecast model based on the data-assimilative VERB code, and discuss the forecast performance over the past 12 months.

  7. Finite Element Simulation Code for Computing Thermal Radiation from a Plasma

    Science.gov (United States)

    Nguyen, C. N.; Rappaport, H. L.

    2004-11-01

    A finite element code, ``THERMRAD,'' for computing thermal radiation from a plasma is under development. Radiation from plasma test particles is found in cylindrical geometry. Although the plasma equilibrium is assumed axisymmetric individual test particle excitation produces a non-axisymmetric electromagnetic response. Specially designed Whitney class basis functions are to be used to allow the solution to be solved on a two-dimensional grid. The basis functions enforce both a vanishing of the divergence of the electric field within grid elements where the complex index of refraction is assumed constant and continuity of tangential electric field across grid elements while allowing the normal component of the electric field to be discontinuous. An appropriate variational principle which incorporates the Sommerfeld radiation condition on the simulation boundary, as well as its discretization by the Rayleigh-Ritz technique is given. 1. ``Finte Element Method for Electromagnetics Problems,'' Volakis et al., Wiley, 1998.

  8. Testing astrophysical radiation hydrodynamics codes with hypervelocity jet experiments on the nova laser

    Energy Technology Data Exchange (ETDEWEB)

    Estabrook, K; Farley, D; Glendinning, S G; Remington, B A; Stone, J; Turner, N

    1999-09-22

    Recent shock tube experiments using the Nova laser facility have demonstrated that strong shocks and highly supersonic flows similar to those encountered in astrophysical jets can be studied in detail through carefully controlled experiment. We propose the use of high power lasers such as Nova, Omega, and NIF to perform experiments on radiation hydrodynamic problems such as jets involving the multidimensional dynamics of strong shocks. High power lasers are the only experimental facilities that can reach the very high Mach number regime. The experiments will serve both as diagnostics of astrophysically interesting gas dynamic problems, and could also form the basis of test problems for numerical algorithms for astrophysical radiation hydrodynamic codes, The potential for experimentally achieving a strongly radiative jet seems very good.

  9. Hybrid Decoder Reconfiguration of AVS-P7 and MPEG-4 /AVC in the Reconfigurable Video Coding Framework

    Directory of Open Access Journals (Sweden)

    Zhang Zhaoyang

    2012-08-01

    Full Text Available With the rapid development of video coding technology, all kinds of video coding standards have been advanced in recent years with a variety of different and complex algorithms. They share common and/or similar coding tools, yet there is currently no explicit way to exploit such commonalities at the level of specifications or implementations. Reconfigurable video coding (RVC is to develop a video coding standard that overcomes many shortcomings of current standardization and specification process by updating and progressively incrementing a modular library of components. In this paper, a hybrid decoder reconfiguration is instantiated in the RVC framework by grouping the coding tools from AVS-P7 and MPEG-4/AVC. Experimental results show that compared with MPEG-4/AVC baseline profile, the reconfigurable coding system reduces the computational complexity and guarantees the coding performance at low bit rate. Moreover, it enriches the RVC video tool library (VTL by introducing the coding tools of AVS-P7, and also verifies the flexibility and re-configurability of RVC framework to meet the needs of different applications.

  10. Neutron transport-burnup code MCORGS and its application in fusion fission hybrid blanket conceptual research

    Science.gov (United States)

    Shi, Xue-Ming; Peng, Xian-Jue

    2016-09-01

    Fusion science and technology has made progress in the last decades. However, commercialization of fusion reactors still faces challenges relating to higher fusion energy gain, irradiation-resistant material, and tritium self-sufficiency. Fusion Fission Hybrid Reactors (FFHR) can be introduced to accelerate the early application of fusion energy. Traditionally, FFHRs have been classified as either breeders or transmuters. Both need partition of plutonium from spent fuel, which will pose nuclear proliferation risks. A conceptual design of a Fusion Fission Hybrid Reactor for Energy (FFHR-E), which can make full use of natural uranium with lower nuclear proliferation risk, is presented. The fusion core parameters are similar to those of the International Thermonuclear Experimental Reactor. An alloy of natural uranium and zirconium is adopted in the fission blanket, which is cooled by light water. In order to model blanket burnup problems, a linkage code MCORGS, which couples MCNP4B and ORIGEN-S, is developed and validated through several typical benchmarks. The average blanket energy Multiplication and Tritium Breeding Ratio can be maintained at 10 and 1.15 respectively over tens of years of continuous irradiation. If simple reprocessing without separation of plutonium from uranium is adopted every few years, FFHR-E can achieve better neutronic performance. MCORGS has also been used to analyze the ultra-deep burnup model of Laser Inertial Confinement Fusion Fission Energy (LIFE) from LLNL, and a new blanket design that uses Pb instead of Be as the neutron multiplier is proposed. In addition, MCORGS has been used to simulate the fluid transmuter model of the In-Zinerater from Sandia. A brief comparison of LIFE, In-Zinerater, and FFHR-E will be given.

  11. Hybrid information privacy system: integration of chaotic neural network and RSA coding

    Science.gov (United States)

    Hsu, Ming-Kai; Willey, Jeff; Lee, Ting N.; Szu, Harold H.

    2005-03-01

    Electronic mails are adopted worldwide; most are easily hacked by hackers. In this paper, we purposed a free, fast and convenient hybrid privacy system to protect email communication. The privacy system is implemented by combining private security RSA algorithm with specific chaos neural network encryption process. The receiver can decrypt received email as long as it can reproduce the specified chaos neural network series, so called spatial-temporal keys. The chaotic typing and initial seed value of chaos neural network series, encrypted by the RSA algorithm, can reproduce spatial-temporal keys. The encrypted chaotic typing and initial seed value are hidden in watermark mixed nonlinearly with message media, wrapped with convolution error correction codes for wireless 3rd generation cellular phones. The message media can be an arbitrary image. The pattern noise has to be considered during transmission and it could affect/change the spatial-temporal keys. Since any change/modification on chaotic typing or initial seed value of chaos neural network series is not acceptable, the RSA codec system must be robust and fault-tolerant via wireless channel. The robust and fault-tolerant properties of chaos neural networks (CNN) were proved by a field theory of Associative Memory by Szu in 1997. The 1-D chaos generating nodes from the logistic map having arbitrarily negative slope a = p/q generating the N-shaped sigmoid was given first by Szu in 1992. In this paper, we simulated the robust and fault-tolerance properties of CNN under additive noise and pattern noise. We also implement a private version of RSA coding and chaos encryption process on messages.

  12. Variable weight Khazani-Syed code using hybrid fixed-dynamic technique for optical code division multiple access system

    Science.gov (United States)

    Anas, Siti Barirah Ahmad; Seyedzadeh, Saleh; Mokhtar, Makhfudzah; Sahbudin, Ratna Kalos Zakiah

    2016-10-01

    Future Internet consists of a wide spectrum of applications with different bit rates and quality of service (QoS) requirements. Prioritizing the services is essential to ensure that the delivery of information is at its best. Existing technologies have demonstrated how service differentiation techniques can be implemented in optical networks using data link and network layer operations. However, a physical layer approach can further improve system performance at a prescribed received signal quality by applying control at the bit level. This paper proposes a coding algorithm to support optical domain service differentiation using spectral amplitude coding techniques within an optical code division multiple access (OCDMA) scenario. A particular user or service has a varying weight applied to obtain the desired signal quality. The properties of the new code are compared with other OCDMA codes proposed for service differentiation. In addition, a mathematical model is developed for performance evaluation of the proposed code using two different detection techniques, namely direct decoding and complementary subtraction.

  13. Reliable Radiation Hybrid Maps: An Efficient Scalable Clustering-based Approach

    Science.gov (United States)

    The process of mapping markers from radiation hybrid mapping (RHM) experiments is equivalent to the traveling salesman problem and, thereby, has combinatorial complexity. As an additional problem, experiments typically result in some unreliable markers that reduce the overall quality of the map. We ...

  14. MULTI2D - a computer code for two-dimensional radiation hydrodynamics

    Science.gov (United States)

    Ramis, R.; Meyer-ter-Vehn, J.; Ramírez, J.

    2009-06-01

    Simulation of radiation hydrodynamics in two spatial dimensions is developed, having in mind, in particular, target design for indirectly driven inertial confinement energy (IFE) and the interpretation of related experiments. Intense radiation pulses by laser or particle beams heat high-Z target configurations of different geometries and lead to a regime which is optically thick in some regions and optically thin in others. A diffusion description is inadequate in this situation. A new numerical code has been developed which describes hydrodynamics in two spatial dimensions (cylindrical R-Z geometry) and radiation transport along rays in three dimensions with the 4 π solid angle discretized in direction. Matter moves on a non-structured mesh composed of trilateral and quadrilateral elements. Radiation flux of a given direction enters on two (one) sides of a triangle and leaves on the opposite side(s) in proportion to the viewing angles depending on the geometry. This scheme allows to propagate sharply edged beams without ray tracing, though at the price of some lateral diffusion. The algorithm treats correctly both the optically thin and optically thick regimes. A symmetric semi-implicit (SSI) method is used to guarantee numerical stability. Program summaryProgram title: MULTI2D Catalogue identifier: AECV_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AECV_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 151 098 No. of bytes in distributed program, including test data, etc.: 889 622 Distribution format: tar.gz Programming language: C Computer: PC (32 bits architecture) Operating system: Linux/Unix RAM: 2 Mbytes Word size: 32 bits Classification: 19.7 External routines: X-window standard library (libX11.so) and corresponding heading files (X11/*.h) are

  15. A new hybrid transfinite element computational methodology for applicability to conduction/convection/radiation heat transfer

    Science.gov (United States)

    Tamma, Kumar K.; Railkar, Sudhir B.

    1988-01-01

    This paper describes new and recent advances in the development of a hybrid transfinite element computational methodology for applicability to conduction/convection/radiation heat transfer problems. The transfinite element methodology, while retaining the modeling versatility of contemporary finite element formulations, is based on application of transform techniques in conjunction with classical Galerkin schemes and is a hybrid approach. The purpose of this paper is to provide a viable hybrid computational methodology for applicability to general transient thermal analysis. Highlights and features of the methodology are described and developed via generalized formulations and applications to several test problems. The proposed transfinite element methodology successfully provides a viable computational approach and numerical test problems validate the proposed developments for conduction/convection/radiation thermal analysis.

  16. A new hybrid transfinite element computational methodology for applicability to conduction/convection/radiation heat transfer

    Science.gov (United States)

    Tamma, Kumar K.; Railkar, Sudhir B.

    1988-01-01

    This paper describes new and recent advances in the development of a hybrid transfinite element computational methodology for applicability to conduction/convection/radiation heat transfer problems. The transfinite element methodology, while retaining the modeling versatility of contemporary finite element formulations, is based on application of transform techniques in conjunction with classical Galerkin schemes and is a hybrid approach. The purpose of this paper is to provide a viable hybrid computational methodology for applicability to general transient thermal analysis. Highlights and features of the methodology are described and developed via generalized formulations and applications to several test problems. The proposed transfinite element methodology successfully provides a viable computational approach and numerical test problems validate the proposed developments for conduction/convection/radiation thermal analysis.

  17. Benchmarking a hybrid MHD/kinetic code with C-2 experimental data

    Science.gov (United States)

    Magee, Richard; Clary, Ryan; Dettrick, Sean; Korepanov, Sergey; Onofri, Marco; Smirnov, Artem; TAE Team

    2013-10-01

    The C-2 device creates field-reversed configuration (FRC) plasmas via the dynamic merging of two compact toroids and heated with neutral beams. Simulations of these plasmas are performed with Q2D - a hybrid MHD/Monte Carlo code that evolves the plasma according to the resistive MHD equations and treats the neutral beam injected fast ions as a minority kinetic species. Recent Q2D runs have resulted in testable predictions, namely that the axial profile of the fast ions is double-peaked, and charge-exchange neutrals are localized in pitch-angle. In some simulations, the fast particle population can induce magnetic fluctuations. These fluctuations are largest in the radial component, have a characteristic frequency approximately equal to the fast ion bounce frequency (f ~ 150 kHz), and a broad k spectrum. These fluctuations have the beneficial effect of smoothing out the double-peaked axial fast ion density profile, resulting in an increased fast ion density at the mid-plane. We will present results from a benchmarking study to quantitatively compare the results of Q2D runs to existing C-2 experimental data.

  18. Collaborative Multi-Layer Network Coding in Hybrid Cellular Cognitive Radio Networks

    KAUST Repository

    Moubayed, Abdallah J.

    2015-05-01

    In this paper, as an extension to [1], we propose a prioritized multi-layer network coding scheme for collaborative packet recovery in hybrid (interweave and underlay) cellular cognitive radio networks. This scheme allows the uncoordinated collaboration between the collocated primary and cognitive radio base-stations in order to minimize their own as well as each other\\'s packet recovery overheads, thus by improving their throughput. The proposed scheme ensures that each network\\'s performance is not degraded by its help to the other network. Moreover, it guarantees that the primary network\\'s interference threshold is not violated in the same and adjacent cells. Yet, the scheme allows the reduction of the recovery overhead in the collocated primary and cognitive radio networks. The reduction in the cognitive radio network is further amplified due to the perfect detection of spectrum holes which allows the cognitive radio base station to transmit at higher power without fear of violating the interference threshold of the primary network. For the secondary network, simulation results show reductions of 20% and 34% in the packet recovery overhead, compared to the non-collaborative scheme, for low and high probabilities of primary packet arrivals, respectively. For the primary network, this reduction was found to be 12%. © 2015 IEEE.

  19. Collaborative Multi-Layer Network Coding For Hybrid Cellular Cognitive Radio Networks

    KAUST Repository

    Moubayed, Abdallah J.

    2014-05-01

    In this thesis, as an extension to [1], we propose a prioritized multi-layer network coding scheme for collaborative packet recovery in hybrid (interweave and underlay) cellular cognitive radio networks. This scheme allows the uncoordinated collaboration between the collocated primary and cognitive radio base-stations in order to minimize their own as well as each other’s packet recovery overheads, thus by improving their throughput. The proposed scheme ensures that each network’s performance is not degraded by its help to the other network. Moreover, it guarantees that the primary network’s interference threshold is not violated in the same and adjacent cells. Yet, the scheme allows the reduction of the recovery overhead in the collocated primary and cognitive radio networks. The reduction in the cognitive radio network is further amplified due to the perfect detection of spectrum holes which allows the cognitive radio base station to transmit at higher power without fear of violating the interference threshold of the primary network. For the secondary network, simulation results show reductions of 20% and 34% in the packet recovery overhead, compared to the non-collaborative scheme, for low and high probabilities of primary packet arrivals, respectively. For the primary network, this reduction was found to be 12%. Furthermore, with the use of fractional cooperation, the average recovery overhead is further reduced by around 5% for the primary network and around 10% for the secondary network when a high fractional cooperation probability is used.

  20. 3-D Parallel, Object-Oriented, Hybrid, PIC Code for Ion Ring Studies

    Science.gov (United States)

    Omelchenko, Y. A.

    1997-08-01

    The 3-D hybrid, Particle-in-Cell (PIC) code, FLAME has been developed to study low-frequency, large orbit plasmas in realistic cylindrical configurations. FLAME assumes plasma quasineutrality and solves the Maxwell equations with displacement current neglected. The electron component is modeled as a massless fluid and all ion components are represented by discrete macro-particles. The poloidal discretization is done by a finite-difference staggered grid method. FFT is applied in the azimuthal direction. A substantial reduction of CPU time is achieved by enabling separate time advances of background and beam particle species in the time-averaged fields. The FLAME structure follows the guidelines of object-oriented programming. Its C++ class hierarchy comprises the Utility, Geometry, Particle, Grid and Distributed base class packages. The latter encapsulates implementation of concurrent grid and particle algorithms. The particle and grid data interprocessor communications are unified and designed to be independent of both the underlying message-passing library and the actual poloidal domain decomposition technique (FFT's are local). Load balancing concerns are addressed by using adaptive domain partitions to account for nonuniform spatial distributions of particle objects. The results of 2-D and 3-D FLAME simulations in support of the FIREX program at Cornell are presented.

  1. Hybrid scheduling mechanisms for Next-generation Passive Optical Networks based on network coding

    Science.gov (United States)

    Zhao, Jijun; Bai, Wei; Liu, Xin; Feng, Nan; Maier, Martin

    2014-10-01

    Network coding (NC) integrated into Passive Optical Networks (PONs) is regarded as a promising solution to achieve higher throughput and energy efficiency. To efficiently support multimedia traffic under this new transmission mode, novel NC-based hybrid scheduling mechanisms for Next-generation PONs (NG-PONs) including energy management, time slot management, resource allocation, and Quality-of-Service (QoS) scheduling are proposed in this paper. First, we design an energy-saving scheme that is based on Bidirectional Centric Scheduling (BCS) to reduce the energy consumption of both the Optical Line Terminal (OLT) and Optical Network Units (ONUs). Next, we propose an intra-ONU scheduling and an inter-ONU scheduling scheme, which takes NC into account to support service differentiation and QoS assurance. The presented simulation results show that BCS achieves higher energy efficiency under low traffic loads, clearly outperforming the alternative NC-based Upstream Centric Scheduling (UCS) scheme. Furthermore, BCS is shown to provide better QoS assurance.

  2. Structure of the solar photosphere studied from the radiation hydrodynamics code ANTARES

    Science.gov (United States)

    Leitner, P.; Lemmerer, B.; Hanslmeier, A.; Zaqarashvili, T.; Veronig, A.; Grimm-Strele, H.; Muthsam, H. J.

    2017-09-01

    The ANTARES radiation hydrodynamics code is capable of simulating the solar granulation in detail unequaled by direct observation. We introduce a state-of-the-art numerical tool to the solar physics community and demonstrate its applicability to model the solar granulation. The code is based on the weighted essentially non-oscillatory finite volume method and by its implementation of local mesh refinement is also capable of simulating turbulent fluids. While the ANTARES code already provides promising insights into small-scale dynamical processes occurring in the quiet-Sun photosphere, it will soon be capable of modeling the latter in the scope of radiation magnetohydrodynamics. In this first preliminary study we focus on the vertical photospheric stratification by examining a 3-D model photosphere with an evolution time much larger than the dynamical timescales of the solar granulation and of particular large horizontal extent corresponding to 25''×25'' on the solar surface to smooth out horizontal spatial inhomogeneities separately for up- and downflows. The highly resolved Cartesian grid thereby covers ˜4 Mm of the upper convection zone and the adjacent photosphere. Correlation analysis, both local and two-point, provides a suitable means to probe the photospheric structure and thereby to identify several layers of characteristic dynamics: The thermal convection zone is found to reach some ten kilometers above the solar surface, while convectively overshooting gas penetrates even higher into the low photosphere. An ≈145 km wide transition layer separates the convective from the oscillatory layers in the higher photosphere.

  3. Mobile, hybrid Compton/coded aperture imaging for detection, identification and localization of gamma-ray sources at stand-off distances

    Science.gov (United States)

    Tornga, Shawn R.

    The Stand-off Radiation Detection System (SORDS) program is an Advanced Technology Demonstration (ATD) project through the Department of Homeland Security's Domestic Nuclear Detection Office (DNDO) with the goal of detection, identification and localization of weak radiological sources in the presence of large dynamic backgrounds. The Raytheon-SORDS Tri-Modal Imager (TMI) is a mobile truck-based, hybrid gamma-ray imaging system able to quickly detect, identify and localize, radiation sources at standoff distances through improved sensitivity while minimizing the false alarm rate. Reconstruction of gamma-ray sources is performed using a combination of two imaging modalities; coded aperture and Compton scatter imaging. The TMI consists of 35 sodium iodide (NaI) crystals 5x5x2 in3 each, arranged in a random coded aperture mask array (CA), followed by 30 position sensitive NaI bars each 24x2.5x3 in3 called the detection array (DA). The CA array acts as both a coded aperture mask and scattering detector for Compton events. The large-area DA array acts as a collection detector for both Compton scattered events and coded aperture events. In this thesis, developed coded aperture, Compton and hybrid imaging algorithms will be described along with their performance. It will be shown that multiple imaging modalities can be fused to improve detection sensitivity over a broader energy range than either alone. Since the TMI is a moving system, peripheral data, such as a Global Positioning System (GPS) and Inertial Navigation System (INS) must also be incorporated. A method of adapting static imaging algorithms to a moving platform has been developed. Also, algorithms were developed in parallel with detector hardware, through the use of extensive simulations performed with the Geometry and Tracking Toolkit v4 (GEANT4). Simulations have been well validated against measured data. Results of image reconstruction algorithms at various speeds and distances will be presented as well as

  4. Performance improvement of hybrid subcarrier multiplexing optical spectrum code division multiplexing system using spectral direct decoding detection technique

    Science.gov (United States)

    Sahbudin, R. K. Z.; Abdullah, M. K.; Mokhtar, M.

    2009-06-01

    This paper proposes a hybrid subcarrier multiplexing/optical spectrum code division multiplexing (SCM/OSCDM) system for the purpose of combining the advantages of both techniques. Optical spectrum code division multiple-access (OSCDMA) is one of the multiplexing techniques that is becoming popular because of the flexibility in the allocation of channels, ability to operate asynchronously, enhanced privacy and increased capacity in bursty nature networks. On the other hand, subcarrier multiplexing (SCM) technique is able to enhance the channel data rate of OSCDMA systems. In this paper, a newly developed detection technique for the OSCDM called spectral direct decoding (SDD) detection technique is compared mathematically with the AND subtraction detection technique. The system utilizes a new unified code construction named KS (Khazani-Syed) code. The results characterizing the bit-error-rate (BER) show that SDD offers a significant improved performance at BER of 10 -9.

  5. Aircrew dosimetry using the Predictive Code for Aircrew Radiation Exposure (PCAIRE).

    Science.gov (United States)

    Lewis, B J; Bennett, L G I; Green, A R; Butler, A; Desormeaux, M; Kitching, F; McCall, M J; Ellaschuk, B; Pierre, M

    2005-01-01

    During 2003, a portable instrument suite was used to conduct cosmic radiation measurements on 49 jet-altitude flights, which brings the total number of in-flight measurements by this research group to over 160 flights since 1999. From previous measurements, correlations have been developed to allow for the interpolation of the dose-equivalent rate for any global position, altitude and date. The result was a Predictive Code for Aircrew Radiation Exposure (PCAIRE), which has since been improved. This version of the PCAIRE has been validated against the integral route dose measurements made at commercial aircraft altitudes during the 49 flights. On most flights, the code gave predictions that agreed to the measured data (within +/- 25%), providing confidence in the use of PCAIRE to predict aircrew exposure to galactic cosmic radiation. An empirical correlation, based on ground-level neutron monitoring data, has also been developed for the estimation of aircrew exposure from solar energetic particle (SEP) events. This model has been used to determine the significance of SEP exposure on a theoretical jet altitude flight during GLE 42.

  6. Data assimilation in the radiation belts using the Salammbô code

    Science.gov (United States)

    Maget, Vincent; Bourdarie, Sébastien

    2017-04-01

    The natural energetic electron environment in the Earth's radiation belts is of general importance as dynamic variations in this environment can impact space hardware and contribute significantly to background signals in a range of other instruments flying in that region. The most dramatic changes in the relativistic electron populations occur during enhanced periods of geomagnetic activity. The relative importance of all competing physical processes involved in the radiation belt dynamics changes from storm to storm and the net result on particle distribution might then be very different. Modeling Earth's radiation belts still constitutes an active field of research. The most common practice is to deduce empirical formulae of physical processes amplitudes versus one or more proxies like Kp, Dst or solar wind parameters from statistical studies. Although this allows us to reproduce the mean dynamics of the radiation belts, this may introduce errors in the system, which becomes even more important for high magnetic activity conditions for which statistics are usually poor. In parallel, it has been shown in the recent years that a data assimilation scheme based on an Ensemble Kalman Filter (EnKF) may lead to great improvements in (1) the accuracy of modeling the different regions of Earth's radiation belts, (2) the possibility to accurately predict the state of the radiation belts, and (3) in accurately reanalyzing a long time period as a basis for specification model and climatology. This talk aims at presenting a global overview of the recent efforts undergone at ONERA concerning data assimilation in the radiation belts based on the Salammbô code and an EnKF. We will in particular focus our attention on the benefits of being able to accurately assimilate different types of measurements in our data assimilation tool.

  7. Milagro Version 2 An Implicit Monte Carlo Code for Thermal Radiative Transfer: Capabilities, Development, and Usage

    Energy Technology Data Exchange (ETDEWEB)

    T.J. Urbatsch; T.M. Evans

    2006-02-15

    We have released Version 2 of Milagro, an object-oriented, C++ code that performs radiative transfer using Fleck and Cummings' Implicit Monte Carlo method. Milagro, a part of the Jayenne program, is a stand-alone driver code used as a methods research vehicle and to verify its underlying classes. These underlying classes are used to construct Implicit Monte Carlo packages for external customers. Milagro-2 represents a design overhaul that allows better parallelism and extensibility. New features in Milagro-2 include verified momentum deposition, restart capability, graphics capability, exact energy conservation, and improved load balancing and parallel efficiency. A users' guide also describes how to configure, make, and run Milagro2.

  8. Abstracts of digital computer code packages assembled by the Radiation Shielding Information Center

    Energy Technology Data Exchange (ETDEWEB)

    Carter, B.J.; Maskewitz, B.F.

    1985-04-01

    This publication, ORNL/RSIC-13, Volumes I to III Revised, has resulted from an internal audit of the first 168 packages of computing technology in the Computer Codes Collection (CCC) of the Radiation Shielding Information Center (RSIC). It replaces the earlier three documents published as single volumes between 1966 to 1972. A significant number of the early code packages were considered to be obsolete and were removed from the collection in the audit process and the CCC numbers were not reassigned. Others not currently being used by the nuclear R and D community were retained in the collection to preserve technology not replaced by newer methods, or were considered of potential value for reference purposes. Much of the early technology, however, has improved through developer/RSIC/user interaction and continues at the forefront of the advancing state-of-the-art.

  9. Efficient modeling of plasma wakefield acceleration in quasi-non-linear-regimes with the hybrid code Architect

    Science.gov (United States)

    Marocchino, A.; Massimo, F.; Rossi, A. R.; Chiadroni, E.; Ferrario, M.

    2016-09-01

    In this paper we present a hybrid approach aiming to assess feasible plasma wakefield acceleration working points with reduced computation resources. The growing interest for plasma wakefield acceleration and especially the need to control with increasing precision the quality of the accelerated bunch demands for more accurate and faster simulations. Particle in cell codes are the state of the art technique to simulate the underlying physics, however the run-time represents the major drawback. Architect is a hybrid code that treats the bunch kinetically and the background electron plasma as a fluid, initialising bunches in vacuum so to take into account for the transition from vacuum to plasma. Architect solves directly the Maxwell's equations on a Yee lattice. Such an approach allows us to drastically reduce run time without loss of generality or accuracy up to the weakly non linear regime.

  10. Efficient modeling of plasma wakefield acceleration in quasi-non-linear-regimes with the hybrid code Architect

    Energy Technology Data Exchange (ETDEWEB)

    Marocchino, A., E-mail: albz.uk@gmail.com [Dipartimento SBAI, “Sapienza” University of Rome and INFN-Roma 1, Rome (Italy); Massimo, F. [Dipartimento SBAI, “Sapienza” University of Rome and INFN-Roma 1, Rome (Italy); Rossi, A.R. [Dipartimento di Fisica, University of Milan and INFN-Milano, Milano (Italy); Chiadroni, E.; Ferrario, M. [INFN-LNF, Frascati (Italy)

    2016-09-01

    In this paper we present a hybrid approach aiming to assess feasible plasma wakefield acceleration working points with reduced computation resources. The growing interest for plasma wakefield acceleration and especially the need to control with increasing precision the quality of the accelerated bunch demands for more accurate and faster simulations. Particle in cell codes are the state of the art technique to simulate the underlying physics, however the run-time represents the major drawback. Architect is a hybrid code that treats the bunch kinetically and the background electron plasma as a fluid, initialising bunches in vacuum so to take into account for the transition from vacuum to plasma. Architect solves directly the Maxwell's equations on a Yee lattice. Such an approach allows us to drastically reduce run time without loss of generality or accuracy up to the weakly non linear regime.

  11. A novel method involving Matlab coding to determine the distribution of a collimated ionizing radiation beam

    Science.gov (United States)

    Ioan, M.-R.

    2016-08-01

    In ionizing radiation related experiments, precisely knowing of the involved parameters it is a very important task. Some of these experiments are involving the use of electromagnetic ionizing radiation such are gamma rays and X rays, others make use of energetic charged or not charged small dimensions particles such are protons, electrons, neutrons and even, in other cases, larger accelerated particles such are helium or deuterium nuclei are used. In all these cases the beam used to hit an exposed target must be previously collimated and precisely characterized. In this paper, a novel method to determine the distribution of the collimated beam involving Matlab coding is proposed. The method was implemented by using of some Pyrex glass test samples placed in the beam where its distribution and dimension must be determined, followed by taking high quality pictures of them and then by digital processing the resulted images. By this method, information regarding the doses absorbed in the exposed samples volume are obtained too.

  12. Extension of the MURaM radiative MHD code for coronal simulations

    CERN Document Server

    Rempel, Matthias

    2016-01-01

    We present a new version of the MURaM radiative MHD code that allows for simulations spanning from the upper convection zone into the solar corona. We implemented the relevant coronal physics in terms of optically thin radiative loss, field aligned heat conduction and an equilibrium ionization equation of state. We artificially limit the coronal Alfv{\\'e}n and heat conduction speeds to computationally manageable values using an approximation to semi-relativistic MHD with an artificially reduced speed of light (Boris correction). We present example solutions ranging from quiet to active Sun in order to verify the validity of our approach. We quantify the role of numerical diffusivity for the effective coronal heating. We find that the (numerical) magnetic Prandtl number determines the ratio of resistive to viscous heating and that owing to the very large magnetic Prandtl number of the solar corona, heating is expected to happen predominantly through viscous dissipation. We find that reasonable solutions can be...

  13. Improving the Salammbo code modelling and using it to better predict radiation belts dynamics

    Science.gov (United States)

    Maget, Vincent; Sicard-Piet, Angelica; Grimald, Sandrine Rochel; Boscher, Daniel

    2016-07-01

    In the framework of the FP7-SPACESTORM project, one objective is to improve the reliability of the model-based predictions performed of the radiation belt dynamics (first developed during the FP7-SPACECAST project). In this purpose we have analyzed and improved the way the simulations using the ONERA Salammbô code are performed, especially in : - Better controlling the driving parameters of the simulation; - Improving the initialization of the simulation in order to be more accurate at most energies for L values between 4 to 6; - Improving the physics of the model. For first point a statistical analysis of the accuracy of the Kp index has been conducted. For point two we have based our method on a long duration simulation in order to extract typical radiation belt states depending on the solar wind stress and geomagnetic activity. For last point we have first improved separately the modelling of different processes acting in the radiation belts and then, we have analyzed the global improvements obtained when simulating them together. We'll discuss here on all these points and on the balance that has to be taken into account between modeled processes to globally improve the radiation belt modelling.

  14. Extension of the MURaM Radiative MHD Code for Coronal Simulations

    Science.gov (United States)

    Rempel, M.

    2017-01-01

    We present a new version of the MURaM radiative magnetohydrodynamics (MHD) code that allows for simulations spanning from the upper convection zone into the solar corona. We implement the relevant coronal physics in terms of optically thin radiative loss, field aligned heat conduction, and an equilibrium ionization equation of state. We artificially limit the coronal Alfvén and heat conduction speeds to computationally manageable values using an approximation to semi-relativistic MHD with an artificially reduced speed of light (Boris correction). We present example solutions ranging from quiet to active Sun in order to verify the validity of our approach. We quantify the role of numerical diffusivity for the effective coronal heating. We find that the (numerical) magnetic Prandtl number determines the ratio of resistive to viscous heating and that owing to the very large magnetic Prandtl number of the solar corona, heating is expected to happen predominantly through viscous dissipation. We find that reasonable solutions can be obtained with values of the reduced speed of light just marginally larger than the maximum sound speed. Overall this leads to a fully explicit code that can compute the time evolution of the solar corona in response to photospheric driving using numerical time steps not much smaller than 0.1 s. Numerical simulations of the coronal response to flux emergence covering a time span of a few days are well within reach using this approach.

  15. Tunable Radiation Response in Hybrid Organic-Inorganic Gate Dielectrics for Low-Voltage Graphene Electronics.

    Science.gov (United States)

    Arnold, Heather N; Cress, Cory D; McMorrow, Julian J; Schmucker, Scott W; Sangwan, Vinod K; Jaber-Ansari, Laila; Kumar, Rajan; Puntambekar, Kanan P; Luck, Kyle A; Marks, Tobin J; Hersam, Mark C

    2016-03-01

    Solution-processed semiconductor and dielectric materials are attractive for future lightweight, low-voltage, flexible electronics, but their response to ionizing radiation environments is not well understood. Here, we investigate the radiation response of graphene field-effect transistors employing multilayer, solution-processed zirconia self-assembled nanodielectrics (Zr-SANDs) with ZrOx as a control. Total ionizing dose (TID) testing is carried out in situ using a vacuum ultraviolet source to a total radiant exposure (RE) of 23.1 μJ/cm(2). The data reveal competing charge density accumulation within and between the individual dielectric layers. Additional measurements of a modified Zr-SAND show that varying individual layer thicknesses within the gate dielectric tuned the TID response. This study thus establishes that the radiation response of graphene electronics can be tailored to achieve a desired radiation sensitivity by incorporating hybrid organic-inorganic gate dielectrics.

  16. Electromagnetic self-consistent field initialization and fluid advance techniques for hybrid-kinetic PWFA code Architect

    Science.gov (United States)

    Massimo, F.; Marocchino, A.; Rossi, A. R.

    2016-09-01

    The realization of Plasma Wakefield Acceleration experiments with high quality of the accelerated bunches requires an increasing number of numerical simulations to perform first-order assessments for the experimental design and online-analysis of the experimental results. Particle in Cell codes are the state-of-the-art tools to study the beam-plasma interaction mechanism, but due to their requirements in terms of number of cores and computational time makes them unsuitable for quick parametric scans. Considerable interest has been shown thus in methods which reduce the computational time needed for the simulation of plasma acceleration. Such methods include the use of hybrid kinetic-fluid models, which treat the relativistic bunches as in a PIC code and the background plasma electrons as a fluid. A technique to properly initialize the bunch electromagnetic fields in the time explicit hybrid kinetic-fluid code Architect is presented, as well the implementation of the Flux Corrected Transport scheme for the fluid equations integrated in the code.

  17. A Random Walk on WASP-12b with the Bayesian Atmospheric Radiative Transfer (BART) Code

    Science.gov (United States)

    Harrington, Joseph; Cubillos, Patricio; Blecic, Jasmina; Challener, Ryan; Rojo, Patricio; Lust, Nathaniel B.; Bowman, Oliver; Blumenthal, Sarah D.; Foster, Andrew S. D.; Foster, Austin James; Stemm, Madison; Bruce, Dylan

    2016-01-01

    We present the Bayesian Atmospheric Radiative Transfer (BART) code for atmospheric property retrievals from transit and eclipse spectra, and apply it to WASP-12b, a hot (~3000 K) exoplanet with a high eclipse signal-to-noise ratio. WASP-12b has been controversial. We (Madhusudhan et al. 2011, Nature) claimed it was the first planet with a high C/O abundance ratio. Line et al. (2014, ApJ) suggested a high CO2 abundance to explain the data. Stevenson et al. (2014, ApJ, atmospheric model by Madhusudhan) add additional data and reaffirm the original result, stating that C2H2 and HCN, not included in the Line et al. models, explain the data. We explore several modeling configurations and include Hubble, Spitzer, and ground-based eclipse data.BART consists of a differential-evolution Markov-Chain Monte Carlo sampler that drives a line-by-line radiative transfer code through the phase space of thermal- and abundance-profile parameters. BART is written in Python and C. Python modules generate atmospheric profiles from sets of MCMC parameters and integrate the resulting spectra over observational bandpasses, allowing high flexibility in modeling the planet without interacting with the fast, C portions that calculate the spectra. BART's shared memory and optimized opacity calculation allow it to run on a laptop, enabling classroom use. Runs can scale constant abundance profiles, profiles of thermochemical equilibrium abundances (TEA) calculated by the included TEA code, or arbitrary curves. Several thermal profile parameterizations are available. BART is an open-source, reproducible-research code. Users must release any code or data modifications if they publish results from it, and we encourage the community to use it and to participate in its development via http://github.com/ExOSPORTS/BART.This work was supported by NASA Planetary Atmospheres grant NNX12AI69G and NASA Astrophysics Data Analysis Program grant NNX13AF38G. J. Blecic holds a NASA Earth and Space Science

  18. A high-resolution radiation hybrid map of the human genome draft sequence.

    Science.gov (United States)

    Olivier, M; Aggarwal, A; Allen, J; Almendras, A A; Bajorek, E S; Beasley, E M; Brady, S D; Bushard, J M; Bustos, V I; Chu, A; Chung, T R; De Witte, A; Denys, M E; Dominguez, R; Fang, N Y; Foster, B D; Freudenberg, R W; Hadley, D; Hamilton, L R; Jeffrey, T J; Kelly, L; Lazzeroni, L; Levy, M R; Lewis, S C; Liu, X; Lopez, F J; Louie, B; Marquis, J P; Martinez, R A; Matsuura, M K; Misherghi, N S; Norton, J A; Olshen, A; Perkins, S M; Perou, A J; Piercy, C; Piercy, M; Qin, F; Reif, T; Sheppard, K; Shokoohi, V; Smick, G A; Sun, W L; Stewart, E A; Fernando, J; Tejeda; Tran, N M; Trejo, T; Vo, N T; Yan, S C; Zierten, D L; Zhao, S; Sachidanandam, R; Trask, B J; Myers, R M; Cox, D R

    2001-02-16

    We have constructed a physical map of the human genome by using a panel of 90 whole-genome radiation hybrids (the TNG panel) in conjunction with 40,322 sequence-tagged sites (STSs) derived from random genomic sequences as well as expressed sequences. Of 36,678 STSs on the TNG radiation hybrid map, only 3604 (9.8%) were absent from the unassembled draft sequence of the human genome. Of 20,030 STSs ordered on the TNG map as well as the assembled human genome draft sequence and the Celera assembled human genome sequence, 36% of the STSs had a discrepant order between the working draft sequence and the Celera sequence. The TNG map order was identical to one of the two sequence orders in 60% of these discrepant cases.

  19. Enhanced non-radiative energy transfer in hybrid III-nitride structures

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R. M.; Athanasiou, M.; Bai, J.; Liu, B.; Wang, T., E-mail: t.wang@sheffield.ac.uk [Department of Electrical and Electronic Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

    2015-09-21

    The effect of surface states has been investigated in hybrid organic/inorganic white light emitting structures that employ high efficiency, nearfield non-radiative energy transfer (NRET) coupling. The structures utilize blue emitting InGaN/GaN multiple quantum well (MQW) nanorod arrays to minimize the separation with a yellow emitting F8BT coating. Surface states due to the exposed III-nitride surfaces of the nanostructures are found to reduce the NRET coupling rate. The surface states are passivated by deposition of a silicon nitride layer on the III-nitride nanorod surface leading to reduced surface recombination. A low thickness surface passivation is shown to increase the NRET coupling rate by 4 times compared to an un-passivated hybrid structure. A model is proposed to explain the increased NRET rate for the passivated hybrid structures based on the reduction in surface electron depletion of the passivated InGaN/GaN MQW nanorods surfaces.

  20. Enhanced non-radiative energy transfer in hybrid III-nitride structures

    Science.gov (United States)

    Smith, R. M.; Athanasiou, M.; Bai, J.; Liu, B.; Wang, T.

    2015-09-01

    The effect of surface states has been investigated in hybrid organic/inorganic white light emitting structures that employ high efficiency, nearfield non-radiative energy transfer (NRET) coupling. The structures utilize blue emitting InGaN/GaN multiple quantum well (MQW) nanorod arrays to minimize the separation with a yellow emitting F8BT coating. Surface states due to the exposed III-nitride surfaces of the nanostructures are found to reduce the NRET coupling rate. The surface states are passivated by deposition of a silicon nitride layer on the III-nitride nanorod surface leading to reduced surface recombination. A low thickness surface passivation is shown to increase the NRET coupling rate by 4 times compared to an un-passivated hybrid structure. A model is proposed to explain the increased NRET rate for the passivated hybrid structures based on the reduction in surface electron depletion of the passivated InGaN/GaN MQW nanorods surfaces.

  1. Hybrid model of the radiation-induced bystander effect

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Viviane V.B.; Faria, Fernando Pereira de; Grynberg, Suely Epsztein, E-mail: vitoriabraga06@gmail.com, E-mail: fernandopereirabh@gmail.com, E-mail: seg@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2013-07-01

    The radiation-induced bystander effect (RIBE) refer to biological alterations in non-irradiated cells that occupy the same medium (culture or tissue) of irradiated cells. The biochemical mechanisms of the RIBE are not completely elucidated. However, several experiments indicate its existence. The objective of this work is to quantify the effect via stochastic and deterministic approaches. The hypotheses of the model are: a) one non-irradiated healthy cell interacts with signals that propagate through the medium. These signals are released by irradiated cells. At the time of interaction cell-signal, the cell can become damaged and signaling or damage and not signaling; b) Both types of damage cells repair with certain rate becoming health cells; c) The diffusion of signals obey the discrete diffusion equation with decay in two dimensions. d) The signal concentration released by irradiated cells depends on the dose in the low dose range (< 0.3 Gy) and saturates for higher dose values. As expected, the temporal analysis of the model as a function of the repair rate shows that the survival fraction decreases as the repair rate is reduced. The analysis of the extent of damage triggered by a signal concentration released by a single irradiated cell at time zero show that the damage grows with the maximum simulation time. The results show good agreement with the experimental data. The stochastic and deterministic methods used are in qualitative agreement, as expected. (author)

  2. [Polymeric materials for biomedical purposes obtained by radiation methods. V. hybrid artificial pancreas].

    Science.gov (United States)

    Burczak, K; Rosiak, J

    1994-01-01

    The authors present a review of works done on the elaboration of a hybrid-type artificial pancreas. The article discusses construction designs, applied polymeric materials as well as biocompatibility problems of polymeric membranes that encapsulate the Langerhans islets. On example of hydrogel membranes prepared by radiation crosslinking of poly(vinyl alcohol) (PVA) the dependence of the diffusion coefficients of glucose, insulin and immunoglobulin G on the crosslinking degree of hydrogels has been shown.

  3. Recent Work in Hybrid Radiation Transport Methods with Applications to Commercial Nuclear Power

    Energy Technology Data Exchange (ETDEWEB)

    Kulesza, Joel A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-20

    This talk will begin with an overview of hybrid radiation transport methods followed by a discussion of the author’s work to advance current capabilities. The talk will then describe applications for these methods in commercial nuclear power reactor analyses and techniques for experimental validation. When discussing these analytical and experimental activities, the importance of technical standards such as those created and maintained by ASTM International will be demonstrated.

  4. A Radiation Chemistry Code Based on the Greens Functions of the Diffusion Equation

    Science.gov (United States)

    Plante, Ianik; Wu, Honglu

    2014-01-01

    Ionizing radiation produces several radiolytic species such as.OH, e-aq, and H. when interacting with biological matter. Following their creation, radiolytic species diffuse and chemically react with biological molecules such as DNA. Despite years of research, many questions on the DNA damage by ionizing radiation remains, notably on the indirect effect, i.e. the damage resulting from the reactions of the radiolytic species with DNA. To simulate DNA damage by ionizing radiation, we are developing a step-by-step radiation chemistry code that is based on the Green's functions of the diffusion equation (GFDE), which is able to follow the trajectories of all particles and their reactions with time. In the recent years, simulations based on the GFDE have been used extensively in biochemistry, notably to simulate biochemical networks in time and space and are often used as the "gold standard" to validate diffusion-reaction theories. The exact GFDE for partially diffusion-controlled reactions is difficult to use because of its complex form. Therefore, the radial Green's function, which is much simpler, is often used. Hence, much effort has been devoted to the sampling of the radial Green's functions, for which we have developed a sampling algorithm This algorithm only yields the inter-particle distance vector length after a time step; the sampling of the deviation angle of the inter-particle vector is not taken into consideration. In this work, we show that the radial distribution is predicted by the exact radial Green's function. We also use a technique developed by Clifford et al. to generate the inter-particle vector deviation angles, knowing the inter-particle vector length before and after a time step. The results are compared with those predicted by the exact GFDE and by the analytical angular functions for free diffusion. This first step in the creation of the radiation chemistry code should help the understanding of the contribution of the indirect effect in the

  5. Premar-2: a Monte Carlo code for radiative transport simulation in atmospheric environments

    Energy Technology Data Exchange (ETDEWEB)

    Cupini, E. [ENEA, Centro Ricerche Ezio Clementel, Bologna, (Italy). Dipt. Innovazione

    1999-07-01

    The peculiarities of the PREMAR-2 code, aimed at radiation transport Monte Carlo simulation in atmospheric environments in the infrared-ultraviolet frequency range, are described. With respect to the previously developed PREMAR code, besides plane multilayers, spherical multilayers and finite sequences of vertical layers, each one with its own atmospheric behaviour, are foreseen in the new code, together with the refraction phenomenon, so that long range, highly slanted paths can now be more faithfully taken into account. A zenithal angular dependence of the albedo coefficient has moreover been introduced. Lidar systems, with spatially independent source and telescope, are allowed again to be simulated, and, in this latest version of the code, sensitivity analyses to be performed. According to this last feasibility, consequences on radiation transport of small perturbations in physical components of the atmospheric environment may be analyze and the related effects on searched results estimated. The availability of a library of physical data (reaction coefficients, phase functions and refraction indexes) is required by the code, providing the essential features of the environment of interest needed of the Monte Carlo simulation. Variance reducing techniques have been enhanced in the Premar-2 code, by introducing, for instance, a local forced collision technique, especially apt to be used in Lidar system simulations. Encouraging comparisons between code and experimental results carried out at the Brasimone Centre of ENEA, have so far been obtained, even if further checks of the code are to be performed. [Italian] Nel presente rapporto vengono descritte le principali caratteristiche del codice di calcolo PREMAR-2, che esegue la simulazione Montecarlo del trasporto della radiazione elettromagnetica nell'atmosfera, nell'intervallo di frequenza che va dall'infrarosso all'ultravioletto. Rispetto al codice PREMAR precedentemente sviluppato, il codice

  6. Mitigation of numerical Cerenkov radiation and instability using a hybrid finite difference-FFT Maxwell solver and a local charge conserving current deposit

    CERN Document Server

    Yu, Peicheng; Tableman, Adam; Decyk, Viktor K; Tsung, Frank S; Fiuza, Frederico; Davidson, Asher; Vieira, Jorge; Fonseca, Ricardo A; Lu, Wei; Silva, Luis O; Mori, Warren B

    2015-01-01

    A hybrid Maxwell solver for fully relativistic and electromagnetic (EM) particle-in-cell (PIC) codes is described. In this solver, the EM fields are solved in $k$ space by performing an FFT in one direction, while using finite difference operators in the other direction(s). This solver eliminates the numerical Cerenkov radiation for particles moving in the preferred direction. Moreover, the numerical Cerenkov instability (NCI) induced by the relativistically drifting plasma and beam can be eliminated using this hybrid solver by applying strategies that are similar to those recently developed for pure FFT solvers. A current correction is applied for the charge conserving current deposit to correctly account for the EM calculation in hybrid Yee-FFT solver. A theoretical analysis of the dispersion properties in vacuum and in a drifting plasma for the hybrid solver is presented, and compared with PIC simulations with good agreement obtained. This hybrid solver is applied to both 2D and 3D Cartesian and quasi-3D (...

  7. Flow-radiation coupling for atmospheric entries using a Hybrid Statistical Narrow Band model

    Science.gov (United States)

    Soucasse, Laurent; Scoggins, James B.; Rivière, Philippe; Magin, Thierry E.; Soufiani, Anouar

    2016-09-01

    In this study, a Hybrid Statistical Narrow Band (HSNB) model is implemented to make fast and accurate predictions of radiative transfer effects on hypersonic entry flows. The HSNB model combines a Statistical Narrow Band (SNB) model for optically thick molecular systems, a box model for optically thin molecular systems and continua, and a Line-By-Line (LBL) description of atomic radiation. Radiative transfer calculations are coupled to a 1D stagnation-line flow model under thermal and chemical nonequilibrium. Earth entry conditions corresponding to the FIRE 2 experiment, as well as Titan entry conditions corresponding to the Huygens probe, are considered in this work. Thermal nonequilibrium is described by a two temperature model, although non-Boltzmann distributions of electronic levels provided by a Quasi-Steady State model are also considered for radiative transfer. For all the studied configurations, radiative transfer effects on the flow, the plasma chemistry and the total heat flux at the wall are analyzed in detail. The HSNB model is shown to reproduce LBL results with an accuracy better than 5% and a speed up of the computational time around two orders of magnitude. Concerning molecular radiation, the HSNB model provides a significant improvement in accuracy compared to the Smeared-Rotational-Band model, especially for Titan entries dominated by optically thick CN radiation.

  8. Simulations of hybrid system varying solar radiation and microturbine response time

    Directory of Open Access Journals (Sweden)

    Yolanda Fernández Ribaya

    2015-07-01

    Full Text Available Hybrid power systems, such as combinations of renewable power sources with intermittent power production and non-renewable power sources, theoretically increase the reliability and thus integration of renewable sources in the electrical system. However, a recent increase in the number of hybrid installations has sparked interest in the effects of their connection to the grid, especially in remote areas. This paper analyses a photovoltaic-gas microturbine hybrid system dimensioned to be installed in La Paz (Mexico.The research presented in this paper studies and quantifies the effects on the total electric power produced, varying both the solar radiation and the gas microturbine response time. The gas microturbine and the photovoltaic panels are modelled using Matlab/Simulink software, obtaining a platform where different tests to simulate real conditions have been executed. They consist of diverse ramps of irradiance that replicate solar radiation variations, and different microturbine response times reproduced by the time constants of a first order transfer function that models the microturbine dynamic response. The results obtained show that when radiation varies quickly it does not produce significant differences in the power guarantee or the microturbine gas consumption, to any microturbine response time. However, these two parameters are highly variable with smooth radiance variations. The maximum total power variation decreases greatly as the radiation variation gets lower. In addition, by decreasing the microturbine response time, it is possible to appreciably increase the power guarantee although the maximum power variation and gas consumption increase. Only in cases of low radiation variation is there no appreciable difference in the maximum power variation obtained by the different turbine response times.

  9. Simulations of hybrid system varying solar radiation and microturbine response time

    Science.gov (United States)

    Fernández Ribaya, Yolanda; Álvarez, Eduardo; Paredes Sánchez, José Pablo; Xiberta Bernat, Jorge

    2015-07-01

    Hybrid power systems, such as combinations of renewable power sources with intermittent power production and non-renewable power sources, theoretically increase the reliability and thus integration of renewable sources in the electrical system. However, a recent increase in the number of hybrid installations has sparked interest in the effects of their connection to the grid, especially in remote areas. This paper analyses a photovoltaic-gas microturbine hybrid system dimensioned to be installed in La Paz (Mexico).The research presented in this paper studies and quantifies the effects on the total electric power produced, varying both the solar radiation and the gas microturbine response time. The gas microturbine and the photovoltaic panels are modelled using Matlab/Simulink software, obtaining a platform where different tests to simulate real conditions have been executed. They consist of diverse ramps of irradiance that replicate solar radiation variations, and different microturbine response times reproduced by the time constants of a first order transfer function that models the microturbine dynamic response. The results obtained show that when radiation varies quickly it does not produce significant differences in the power guarantee or the microturbine gas consumption, to any microturbine response time. However, these two parameters are highly variable with smooth radiance variations. The maximum total power variation decreases greatly as the radiation variation gets lower. In addition, by decreasing the microturbine response time, it is possible to appreciably increase the power guarantee although the maximum power variation and gas consumption increase. Only in cases of low radiation variation is there no appreciable difference in the maximum power variation obtained by the different turbine response times.

  10. Simulations of hybrid system varying solar radiation and microturbine response time

    Energy Technology Data Exchange (ETDEWEB)

    Fernández Ribaya, Yolanda, E-mail: fernandezryolanda@uniovi.es; Álvarez, Eduardo; Paredes Sánchez, José Pablo; Xiberta Bernat, Jorge [Department of Energy E.I.M.E.M., University of Oviedo. 13 Independencia Street 2" n" d floor, 36004, Oviedo (Spain)

    2015-07-15

    Hybrid power systems, such as combinations of renewable power sources with intermittent power production and non-renewable power sources, theoretically increase the reliability and thus integration of renewable sources in the electrical system. However, a recent increase in the number of hybrid installations has sparked interest in the effects of their connection to the grid, especially in remote areas. This paper analyses a photovoltaic-gas microturbine hybrid system dimensioned to be installed in La Paz (Mexico).The research presented in this paper studies and quantifies the effects on the total electric power produced, varying both the solar radiation and the gas microturbine response time. The gas microturbine and the photovoltaic panels are modelled using Matlab/Simulink software, obtaining a platform where different tests to simulate real conditions have been executed. They consist of diverse ramps of irradiance that replicate solar radiation variations, and different microturbine response times reproduced by the time constants of a first order transfer function that models the microturbine dynamic response. The results obtained show that when radiation varies quickly it does not produce significant differences in the power guarantee or the microturbine gas consumption, to any microturbine response time. However, these two parameters are highly variable with smooth radiance variations. The maximum total power variation decreases greatly as the radiation variation gets lower. In addition, by decreasing the microturbine response time, it is possible to appreciably increase the power guarantee although the maximum power variation and gas consumption increase. Only in cases of low radiation variation is there no appreciable difference in the maximum power variation obtained by the different turbine response times.

  11. Multiple ITS copies reveal extensive hybridization within Rheum (Polygonaceae, a genus that has undergone rapid radiation.

    Directory of Open Access Journals (Sweden)

    Dongshi Wan

    Full Text Available BACKGROUND: During adaptive radiation events, characters can arise multiple times due to parallel evolution, but transfer of traits through hybridization provides an alternative explanation for the same character appearing in apparently non-sister lineages. The signature of hybridization can be detected in incongruence between phylogenies derived from different markers, or from the presence of two divergent versions of a nuclear marker such as ITS within one individual. METHODOLOGY/PRINCIPAL FINDINGS: In this study, we cloned and sequenced ITS regions for 30 species of the genus Rheum, and compared them with a cpDNA phylogeny. Seven species contained two divergent copies of ITS that resolved in different clades from one another in each case, indicating hybridization events too recent for concerted evolution to have homogenised the ITS sequences. Hybridization was also indicated in at least two further species via incongruence in their position between ITS and cpDNA phylogenies. None of the ITS sequences present in these nine species matched those detected in any other species, which provides tentative evidence against recent introgression as an explanation. Rheum globulosum, previously indicated by cpDNA to represent an independent origin of decumbent habit, is indicated by ITS to be part of clade of decumbent species, which acquired cpDNA of another clade via hybridization. However decumbent and glasshouse morphology are confirmed to have arisen three and two times, respectively. CONCLUSIONS: These findings suggested that hybridization among QTP species of Rheum has been extensive, and that a role of hybridization in diversification of Rheum requires investigation.

  12. HybridArc: A novel radiation therapy technique combining optimized dynamic arcs and intensity modulation

    Energy Technology Data Exchange (ETDEWEB)

    Robar, James L., E-mail: james.robar@cdha.nshealth.ca [Department of Radiation Oncology, Dalhousie University, Halifax (Canada); Department of Physics and Atmospheric Science, Dalhousie University, Halifax (Canada); Thomas, Christopher [Department of Radiation Oncology, Dalhousie University, Halifax (Canada)

    2012-01-01

    This investigation focuses on possible dosimetric and efficiency advantages of HybridArc-a novel treatment planning approach combining optimized dynamic arcs with intensity-modulated radiation therapy (IMRT) beams. Application of this technique to two disparate sites, complex cranial tumors, and prostate was examined. HybridArc plans were compared with either dynamic conformal arc (DCA) or IMRT plans to determine whether HybridArc offers a synergy through combination of these 2 techniques. Plans were compared with regard to target volume dose conformity, target volume dose homogeneity, sparing of proximal organs at risk, normal tissue sparing, and monitor unit (MU) efficiency. For cranial cases, HybridArc produced significantly improved dose conformity compared with both DCA and IMRT but did not improve sparing of the brainstem or optic chiasm. For prostate cases, conformity was improved compared with DCA but not IMRT. Compared with IMRT, the dose homogeneity in the planning target volume was improved, and the maximum doses received by the bladder and rectum were reduced. Both arc-based techniques distribute peripheral dose over larger volumes of normal tissue compared with IMRT, whereas HybridArc involved slightly greater volumes of normal tissues compared with DCA. Compared with IMRT, cranial cases required 38% more MUs, whereas for prostate cases, MUs were reduced by 7%. For cranial cases, HybridArc improves dose conformity to the target. For prostate cases, dose conformity and homogeneity are improved compared with DCA and IMRT, respectively. Compared with IMRT, whether required MUs increase or decrease with HybridArc was site-dependent.

  13. A study of the earth radiation budget using a 3D Monte-Carlo radiative transer code

    Science.gov (United States)

    Okata, M.; Nakajima, T.; Sato, Y.; Inoue, T.; Donovan, D. P.

    2013-12-01

    The purpose of this study is to evaluate the earth's radiation budget when data are available from satellite-borne active sensors, i.e. cloud profiling radar (CPR) and lidar, and a multi-spectral imager (MSI) in the project of the Earth Explorer/EarthCARE mission. For this purpose, we first developed forward and backward 3D Monte Carlo radiative transfer codes that can treat a broadband solar flux calculation including thermal infrared emission calculation by k-distribution parameters of Sekiguchi and Nakajima (2008). In order to construct the 3D cloud field, we tried the following three methods: 1) stochastic cloud generated by randomized optical thickness each layer distribution and regularly-distributed tilted clouds, 2) numerical simulations by a non-hydrostatic model with bin cloud microphysics model and 3) Minimum cloud Information Deviation Profiling Method (MIDPM) as explained later. As for the method-2 (numerical modeling method), we employed numerical simulation results of Californian summer stratus clouds simulated by a non-hydrostatic atmospheric model with a bin-type cloud microphysics model based on the JMA NHM model (Iguchi et al., 2008; Sato et al., 2009, 2012) with horizontal (vertical) grid spacing of 100m (20m) and 300m (20m) in a domain of 30km (x), 30km (y), 1.5km (z) and with a horizontally periodic lateral boundary condition. Two different cell systems were simulated depending on the cloud condensation nuclei (CCN) concentration. In the case of horizontal resolution of 100m, regionally averaged cloud optical thickness, , and standard deviation of COT, were 3.0 and 4.3 for pristine case and 8.5 and 7.4 for polluted case, respectively. In the MIDPM method, we first construct a library of pair of observed vertical profiles from active sensors and collocated imager products at the nadir footprint, i.e. spectral imager radiances, cloud optical thickness (COT), effective particle radius (RE) and cloud top temperature (Tc). We then select a best

  14. FOOD: an interactive code to calculate internal radiation doses from contaminated food products

    Energy Technology Data Exchange (ETDEWEB)

    Baker, D.A.; Hoenes, G.R.; Soldat, J.K.

    1976-01-01

    An interactive code, FOOD, has been written in BASIC for the UNIVAC 1108 to facilitate calculation of internal radiation doses to man from radionuclides in food products. In the dose model, vegetation may be contaminated by either air or irrigation water containing radionuclides. The model considers two mechanisms for radionuclide contamination of vegetation: direct deposition on leaves and uptake from soil through the root system. The user may select up to 14 food categories with corresponding consumption rates, growing periods and either irrigation rates or atmospheric deposition rates. These foods include various kinds of produce, grains and animal products. At present, doses may be calculated for the skin, total body and five internal organs from 190 radionuclides. Dose summaries can be displayed at the local terminal. Further details on percent contribution to dose by nuclide and by food type are available from an auxiliary high-speed printer. This output also includes estimated radionuclide concentrations in soil, plants and animal products.

  15. Design of Pass Band Filter in Hybrid Architecture Planar/Non-Radiative Dielectric Waveguide Integration Technology

    Directory of Open Access Journals (Sweden)

    Harizi Hanen

    2012-01-01

    Full Text Available Problem statement: The expansion of RF, microwave and millimeter devices has revolutionized today’s ommunication and sensor systems. Low-cost, high-performance and mass producible millimeter wave technologies are vital for commercial broadband systems. Challenging issues are commonly faced in the design of low-loss integrated circuits for example high-Q band pass filter, which the planar technique is fundamentally limited in performance. Approach: In this study, we present a design of a nonradiative dielectric waveguide band pass filter based on hybrid architecture of micro strip line and non-radiative dielectric waveguide. Results: The simulation with High Frequency Structure Simulator (HFSS three dimensional analyses is presented. Conclusion: The non radiative dielectric resolves most of the drawbacks of dielectric waveguide in connection with the radiation loss."

  16. A hybrid transport-diffusion model for radiative transfer in absorbing and scattering media

    Energy Technology Data Exchange (ETDEWEB)

    Roger, M., E-mail: maxime.roger@insa-lyon.fr [Université de Lyon, CNRS, INSA-Lyon, CETHIL, UMR5008, F-69621 Villeurbanne (France); Caliot, C. [PROMES-UPR CNRS 6144, 7 rue du Four Solaire, 66120 Font Romeu Odeillo (France); Crouseilles, N. [INRIA-Rennes Bretagne-Atlantique (IPSO Project) and Université de Rennes 1 (IRMAR), Campus de Beaulieu, 35042 Rennes Cedex (France); Coelho, P.J. [Mechanical Engineering Department, LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001, Lisboa (Portugal)

    2014-10-15

    A new multi-scale hybrid transport-diffusion model for radiative transfer is proposed in order to improve the efficiency of the calculations close to the diffusive regime, in absorbing and strongly scattering media. In this model, the radiative intensity is decomposed into a macroscopic component calculated by the diffusion equation, and a mesoscopic component. The transport equation for the mesoscopic component allows to correct the estimation of the diffusion equation, and then to obtain the solution of the linear radiative transfer equation. In this work, results are presented for stationary and transient radiative transfer cases, in examples which concern solar concentrated and optical tomography applications. The Monte Carlo and the discrete-ordinate methods are used to solve the mesoscopic equation. It is shown that the multi-scale model allows to improve the efficiency of the calculations when the medium is close to the diffusive regime. The proposed model is a good alternative for radiative transfer at the intermediate regime where the macroscopic diffusion equation is not accurate enough and the radiative transfer equation requires too much computational effort.

  17. Experiences using IAEA Code of practice for radiation sterilization of tissue allografts: Validation and routine control

    Energy Technology Data Exchange (ETDEWEB)

    Hilmy, N. [Batan Research Tissue Bank (BRTB), Centre for Research and Development of Isotopes and Radiation Technology, P.O. Box 7002, JKSKL, Jakarta 12070 (Indonesia)], E-mail: nazly@batan.go.id; Febrida, A.; Basril, A. [Batan Research Tissue Bank (BRTB), Centre for Research and Development of Isotopes and Radiation Technology, P.O. Box 7002, JKSKL, Jakarta 12070 (Indonesia)

    2007-11-15

    Problems of tissue allografts in using International Standard (ISO) 11137 for validation of radiation sterilization dose (RSD) are limited and low numbers of uniform samples per production batch, those are products obtained from one donor. Allograft is a graft transplanted between two different individuals of the same species. The minimum number of uniform samples needed for verification dose (VD) experiment at the selected sterility assurance level (SAL) per production batch according to the IAEA Code is 20, i.e., 10 for bio-burden determination and the remaining 10 for sterilization test. Three methods of the IAEA Code have been used for validation of RSD, i.e., method A1 that is a modification of method 1 of ISO 11137:1995, method B (ISO 13409:1996), and method C (AAMI TIR 27:2001). This paper describes VD experiments using uniform products obtained from one cadaver donor, i.e., cancellous bones, demineralized bone powders and amnion grafts from one life donor. Results of the verification dose experiments show that RSD is 15.4 kGy for cancellous and demineralized bone grafts and 19.2 kGy for amnion grafts according to method A1 and 25 kGy according to methods B and C.

  18. Acoustic radiation force impulse (ARFI) imaging of zebrafish embryo by high-frequency coded excitation sequence.

    Science.gov (United States)

    Park, Jinhyoung; Lee, Jungwoo; Lau, Sien Ting; Lee, Changyang; Huang, Ying; Lien, Ching-Ling; Kirk Shung, K

    2012-04-01

    Acoustic radiation force impulse (ARFI) imaging has been developed as a non-invasive method for quantitative illustration of tissue stiffness or displacement. Conventional ARFI imaging (2-10 MHz) has been implemented in commercial scanners for illustrating elastic properties of several organs. The image resolution, however, is too coarse to study mechanical properties of micro-sized objects such as cells. This article thus presents a high-frequency coded excitation ARFI technique, with the ultimate goal of displaying elastic characteristics of cellular structures. Tissue mimicking phantoms and zebrafish embryos are imaged with a 100-MHz lithium niobate (LiNbO₃) transducer, by cross-correlating tracked RF echoes with the reference. The phantom results show that the contrast of ARFI image (14 dB) with coded excitation is better than that of the conventional ARFI image (9 dB). The depths of penetration are 2.6 and 2.2 mm, respectively. The stiffness data of the zebrafish demonstrate that the envelope is harder than the embryo region. The temporal displacement change at the embryo and the chorion is as large as 36 and 3.6 μm. Consequently, this high-frequency ARFI approach may serve as a remote palpation imaging tool that reveals viscoelastic properties of small biological samples.

  19. Development of Parallel Computing Framework to Enhance Radiation Transport Code Capabilities for Rare Isotope Beam Facility Design

    Energy Technology Data Exchange (ETDEWEB)

    Kostin, Mikhail [FRIB, MSU; Mokhov, Nikolai [FNAL; Niita, Koji [RIST, Japan

    2013-09-25

    A parallel computing framework has been developed to use with general-purpose radiation transport codes. The framework was implemented as a C++ module that uses MPI for message passing. It is intended to be used with older radiation transport codes implemented in Fortran77, Fortran 90 or C. The module is significantly independent of radiation transport codes it can be used with, and is connected to the codes by means of a number of interface functions. The framework was developed and tested in conjunction with the MARS15 code. It is possible to use it with other codes such as PHITS, FLUKA and MCNP after certain adjustments. Besides the parallel computing functionality, the framework offers a checkpoint facility that allows restarting calculations with a saved checkpoint file. The checkpoint facility can be used in single process calculations as well as in the parallel regime. The framework corrects some of the known problems with the scheduling and load balancing found in the original implementations of the parallel computing functionality in MARS15 and PHITS. The framework can be used efficiently on homogeneous systems and networks of workstations, where the interference from the other users is possible.

  20. Numerical Modeling of Imploding Plasma liners Using the 1D Radiation-Hydrodynamics Code HELIOS

    Science.gov (United States)

    Davis, J. S.; Hanna, D. S.; Awe, T. J.; Hsu, S. C.; Stanic, M.; Cassibry, J. T.; Macfarlane, J. J.

    2010-11-01

    The Plasma Liner Experiment (PLX) is attempting to form imploding plasma liners to reach 0.1 Mbar upon stagnation, via 30--60 spherically convergent plasma jets. PLX is partly motivated by the desire to develop a standoff driver for magneto-inertial fusion. The liner density, atomic makeup, and implosion velocity will help determine the maximum pressure that can be achieved. This work focuses on exploring the effects of atomic physics and radiation on the 1D liner implosion and stagnation dynamics. For this reason, we are using Prism Computational Science's 1D Lagrangian rad-hydro code HELIOS, which has both equation of state (EOS) table-lookup and detailed configuration accounting (DCA) atomic physics modeling. By comparing a series of PLX-relevant cases proceeding from ideal gas, to EOS tables, to DCA treatments, we aim to identify how and when atomic physics effects are important for determining the peak achievable stagnation pressures. In addition, we present verification test results as well as brief comparisons to results obtained with RAVEN (1D radiation-MHD) and SPHC (smoothed particle hydrodynamics).

  1. Odyssey: A Public GPU-Based Code for General-Relativistic Radiative Transfer in Kerr Spacetime

    CERN Document Server

    Pu, Hung-Yi; Younsi, Ziri; Yoon, Suk-Jin

    2016-01-01

    General-relativistic radiative transfer (GRRT) calculations coupled with the calculation of geodesics in the Kerr spacetime are an essential tool for determining the images, spectra and light curves from matter in the vicinity of black holes. Such studies are especially important for ongoing and upcoming millimeter/submillimeter (mm/sub-mm) Very Long Baseline Interferometry (VLBI) observations of the supermassive black holes at the centres of Sgr A^{*} and M87. To this end we introduce Odyssey, a Graphics Processing Unit(GPU)-based code for ray tracing and radiative transfer in the Kerr spacetime. On a single GPU, the performance of Odyssey can exceed 1 nanosecond per photon, per Runge-Kutta integration step. Odyssey is publicly available, fast, accurate, and flexible enough to be modified to suit the specific needs of new users. Along with a Graphical User Interface (GUI) powered by a video-accelerated display architecture, we also present an educational software tool, Odyssey_Edu, for showing in real time h...

  2. Odyssey: A Public GPU-based Code for General Relativistic Radiative Transfer in Kerr Spacetime

    Science.gov (United States)

    Pu, Hung-Yi; Yun, Kiyun; Younsi, Ziri; Yoon, Suk-Jin

    2016-04-01

    General relativistic radiative transfer calculations coupled with the calculation of geodesics in the Kerr spacetime are an essential tool for determining the images, spectra, and light curves from matter in the vicinity of black holes. Such studies are especially important for ongoing and upcoming millimeter/submillimeter very long baseline interferometry observations of the supermassive black holes at the centers of Sgr A* and M87. To this end we introduce Odyssey, a graphics processing unit (GPU) based code for ray tracing and radiative transfer in the Kerr spacetime. On a single GPU, the performance of Odyssey can exceed 1 ns per photon, per Runge-Kutta integration step. Odyssey is publicly available, fast, accurate, and flexible enough to be modified to suit the specific needs of new users. Along with a Graphical User Interface powered by a video-accelerated display architecture, we also present an educational software tool, Odyssey_Edu, for showing in real time how null geodesics around a Kerr black hole vary as a function of black hole spin and angle of incidence onto the black hole.

  3. ODYSSEY: A PUBLIC GPU-BASED CODE FOR GENERAL RELATIVISTIC RADIATIVE TRANSFER IN KERR SPACETIME

    Energy Technology Data Exchange (ETDEWEB)

    Pu, Hung-Yi [Institute of Astronomy and Astrophysics, Academia Sinica, 11F of Astronomy-Mathematics Building, AS/NTU No. 1, Taipei 10617, Taiwan (China); Yun, Kiyun; Yoon, Suk-Jin [Department of Astronomy and Center for Galaxy Evolution Research, Yonsei University, Seoul 120-749 (Korea, Republic of); Younsi, Ziri [Institut für Theoretische Physik, Max-von-Laue-Straße 1, D-60438 Frankfurt am Main (Germany)

    2016-04-01

    General relativistic radiative transfer calculations coupled with the calculation of geodesics in the Kerr spacetime are an essential tool for determining the images, spectra, and light curves from matter in the vicinity of black holes. Such studies are especially important for ongoing and upcoming millimeter/submillimeter very long baseline interferometry observations of the supermassive black holes at the centers of Sgr A* and M87. To this end we introduce Odyssey, a graphics processing unit (GPU) based code for ray tracing and radiative transfer in the Kerr spacetime. On a single GPU, the performance of Odyssey can exceed 1 ns per photon, per Runge–Kutta integration step. Odyssey is publicly available, fast, accurate, and flexible enough to be modified to suit the specific needs of new users. Along with a Graphical User Interface powered by a video-accelerated display architecture, we also present an educational software tool, Odyssey-Edu, for showing in real time how null geodesics around a Kerr black hole vary as a function of black hole spin and angle of incidence onto the black hole.

  4. Implementation of tetrahedral-mesh geometry in Monte Carlo radiation transport code PHITS

    Science.gov (United States)

    Furuta, Takuya; Sato, Tatsuhiko; Han, Min Cheol; Yeom, Yeon Soo; Kim, Chan Hyeong; Brown, Justin L.; Bolch, Wesley E.

    2017-06-01

    A new function to treat tetrahedral-mesh geometry was implemented in the particle and heavy ion transport code systems. To accelerate the computational speed in the transport process, an original algorithm was introduced to initially prepare decomposition maps for the container box of the tetrahedral-mesh geometry. The computational performance was tested by conducting radiation transport simulations of 100 MeV protons and 1 MeV photons in a water phantom represented by tetrahedral mesh. The simulation was repeated with varying number of meshes and the required computational times were then compared with those of the conventional voxel representation. Our results show that the computational costs for each boundary crossing of the region mesh are essentially equivalent for both representations. This study suggests that the tetrahedral-mesh representation offers not only a flexible description of the transport geometry but also improvement of computational efficiency for the radiation transport. Due to the adaptability of tetrahedrons in both size and shape, dosimetrically equivalent objects can be represented by tetrahedrons with a much fewer number of meshes as compared its voxelized representation. Our study additionally included dosimetric calculations using a computational human phantom. A significant acceleration of the computational speed, about 4 times, was confirmed by the adoption of a tetrahedral mesh over the traditional voxel mesh geometry.

  5. The UF family of hybrid phantoms of the developing human fetus for computational radiation dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Maynard, Matthew R; Geyer, John W; Bolch, Wesley [Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, FL (United States); Aris, John P [Department of Anatomy and Cell Biology, University of Florida, Gainesville, FL (United States); Shifrin, Roger Y, E-mail: wbolch@ufl.edu [Department of Radiology, University of Florida, Gainesville, FL (United States)

    2011-08-07

    Historically, the development of computational phantoms for radiation dosimetry has primarily been directed at capturing and representing adult and pediatric anatomy, with less emphasis devoted to models of the human fetus. As concern grows over possible radiation-induced cancers from medical and non-medical exposures of the pregnant female, the need to better quantify fetal radiation doses, particularly at the organ-level, also increases. Studies such as the European Union's SOLO (Epidemiological Studies of Exposed Southern Urals Populations) hope to improve our understanding of cancer risks following chronic in utero radiation exposure. For projects such as SOLO, currently available fetal anatomic models do not provide sufficient anatomical detail for organ-level dose assessment. To address this need, two fetal hybrid computational phantoms were constructed using high-quality magnetic resonance imaging and computed tomography image sets obtained for two well-preserved fetal specimens aged 11.5 and 21 weeks post-conception. Individual soft tissue organs, bone sites and outer body contours were segmented from these images using 3D-DOCTOR(TM) and then imported to the 3D modeling software package Rhinoceros(TM) for further modeling and conversion of soft tissue organs, certain bone sites and outer body contours to deformable non-uniform rational B-spline surfaces. The two specimen-specific phantoms, along with a modified version of the 38 week UF hybrid newborn phantom, comprised a set of base phantoms from which a series of hybrid computational phantoms was derived for fetal ages 8, 10, 15, 20, 25, 30, 35 and 38 weeks post-conception. The methodology used to construct the series of phantoms accounted for the following age-dependent parameters: (1) variations in skeletal size and proportion, (2) bone-dependent variations in relative levels of bone growth, (3) variations in individual organ masses and total fetal masses and (4) statistical percentile variations

  6. The UF family of hybrid phantoms of the developing human fetus for computational radiation dosimetry

    Science.gov (United States)

    Maynard, Matthew R.; Geyer, John W.; Aris, John P.; Shifrin, Roger Y.; Bolch, Wesley

    2011-08-01

    Historically, the development of computational phantoms for radiation dosimetry has primarily been directed at capturing and representing adult and pediatric anatomy, with less emphasis devoted to models of the human fetus. As concern grows over possible radiation-induced cancers from medical and non-medical exposures of the pregnant female, the need to better quantify fetal radiation doses, particularly at the organ-level, also increases. Studies such as the European Union's SOLO (Epidemiological Studies of Exposed Southern Urals Populations) hope to improve our understanding of cancer risks following chronic in utero radiation exposure. For projects such as SOLO, currently available fetal anatomic models do not provide sufficient anatomical detail for organ-level dose assessment. To address this need, two fetal hybrid computational phantoms were constructed using high-quality magnetic resonance imaging and computed tomography image sets obtained for two well-preserved fetal specimens aged 11.5 and 21 weeks post-conception. Individual soft tissue organs, bone sites and outer body contours were segmented from these images using 3D-DOCTOR™ and then imported to the 3D modeling software package Rhinoceros™ for further modeling and conversion of soft tissue organs, certain bone sites and outer body contours to deformable non-uniform rational B-spline surfaces. The two specimen-specific phantoms, along with a modified version of the 38 week UF hybrid newborn phantom, comprised a set of base phantoms from which a series of hybrid computational phantoms was derived for fetal ages 8, 10, 15, 20, 25, 30, 35 and 38 weeks post-conception. The methodology used to construct the series of phantoms accounted for the following age-dependent parameters: (1) variations in skeletal size and proportion, (2) bone-dependent variations in relative levels of bone growth, (3) variations in individual organ masses and total fetal masses and (4) statistical percentile variations in

  7. Linear benchmarks between the hybrid codes HYMAGYC and HMGC to study energetic particle driven Alfvénic modes

    Science.gov (United States)

    Fogaccia, G.; Vlad, G.; Briguglio, S.

    2016-11-01

    Resonant interaction between energetic particles (EPs), produced by fusion reactions and/or additional heating systems, and shear Alfvén modes can destabilize global Alfvénic modes enhancing the EP transport. In order to investigate the EP transport in present and next generation fusion devices, numerical simulations are recognized as a very important tool. Among the various numerical models, the hybrid MHD gyrokinetic one has shown to be a valid compromise between a sufficiently accurate wave-particle interaction description and affordable computational resource requirements. This paper presents a linear benchmark between the hybrid codes HYMAGYC and HMGC. The HYMAGYC code solves the full, linear MHD equations in general curvilinear geometry for the bulk plasma and describes the EP population by the nonlinear gyrokinetic Vlasov equation. On the other side, HMGC solves the nonlinear, reduced O≤ft(ε 03\\right) , pressureless MHD equations ({ε0} being the inverse aspect ratio) for the bulk plasma and the drift kinetic Vlasov equation for the EPs. The results of the HYMAGYC and HMGC codes have been compared both in the MHD limit and in a wide range of the EP parameter space for two test cases (one of which being the so-called TAE n  =  6 ITPA Energetic Particle Group test case), both characterized by {ε0}\\ll 1 . In the first test case (test case A), good qualitative agreement is found w.r.t. real frequencies, growth rates and spatial structures of the most unstable modes, with some quantitative differences for the growth rates. For the so-called ITPA test case (test case B), at the nominal energetic particle density value, the disagreement between the two codes is, on the contrary, also qualitative, as a different mode is found as the most unstable one.

  8. Response of a hybrid pixel detector (MEDIPIX3) to different radiation sources for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Chumacero, E. Miguel; De Celis Alonso, B.; Martínez Hernández, M. I.; Vargas, G.; Moreno Barbosa, E., E-mail: emoreno.emb@gmail.com [Facultad de Ciencias Físico Matemáticas, Benemérita Universidad Autónoma de Puebla, Av. San Claudio y Rio Verde, Puebla (Mexico); Moreno Barbosa, F. [Hospital General del Sur Hospital de la Mujer, Puebla (Mexico)

    2014-11-07

    The development in semiconductor CMOS technology has enabled the creation of sensitive detectors for a wide range of ionizing radiation. These devices are suitable for photon counting and can be used in imaging and tomography X-ray diagnostics. The Medipix[1] radiation detection system is a hybrid silicon pixel chip developed for particle tracking applications in High Energy Physics. Its exceptional features (high spatial and energy resolution, embedded ultra fast readout, different operation modes, etc.) make the Medipix an attractive device for applications in medical imaging. In this work the energy characterization of a third-generation Medipix chip (Medipix3) coupled to a silicon sensor is presented. We used different radiation sources (strontium 90, iron 55 and americium 241) to obtain the response curve of the hybrid detector as a function of energy. We also studied the contrast of the Medipix as a measure of pixel noise. Finally we studied the response to fluorescence X rays from different target materials (In, Pd and Cd) for the two data acquisition modes of the chip; single pixel mode and charge summing mode.

  9. [Evaluation of Radiation Dose during Stent-graft Treatment Using a Hybrid Operating Room System].

    Science.gov (United States)

    Haga, Yoshihiro; Chida, Kouichi; Kaga, Yuji; Saitou, Kazuhisa; Arai, Takeshi; Suzuki, Shinichi; Iwaya, Yoshimi; Kumasaka, Eriko; Kataoka, Nozomi; Satou, Naoto; Abe, Mitsuya

    2015-12-01

    In recent years, aortic aneurysm treatment with stent graft grafting in the X-ray fluoroscopy is increasing. This is an endovascular therapy, because it is a treatment which includes the risk of radiation damage, having to deal with radiation damage, to know in advance is important. In this study, in order to grasp the trend of exposure stent graft implantation in a hybrid operating room (OR) system, focusing on clinical data (entrance skin dose and fluoroscopy time), was to count the total. In TEVAR and EVAR, fluoroscopy time became 13.40 ± 7.27 minutes, 23.67 ± 11.76 minutes, ESD became 0.87 ± 0.41 mGy, 1.11 ± 0.57 mGy. (fluoroscopy time of EVAR was 2.0 times than TEVAR. DAP of EVAR was 1.2 times than TEVAR.) When using the device, adapted lesions and usage are different. This means that care changes in exposure-related factors. In this study, exposure trends of the stent graft implantation was able to grasp. It can be a helpful way to reduce/optimize the radiation dose in a hybrid OR system.

  10. Radiation hazards to vascular surgeon and scrub nurse in mobile fluoroscopy equipped hybrid vascular room

    Science.gov (United States)

    Kim, Jong Bin; Lee, Jaehoon

    2017-01-01

    Purpose The aim of the present study was to identify the radiation hazards to vascular surgeons and scrub nurses working in mobile fluoroscopy equipped hybrid vascular operation rooms; additionally, to estimate cumulative cancer risk due to certain exposure dosages. Methods The study was conducted prospectively in 71 patients (53 men and 18 women) who had undergone vascular intervention at our hybrid vascular theater for 6 months. OEC 9900 fluoroscopy was used as mobile C-arm. Exposure dose (ED) was measured by attaching optically stimulated luminescence at in and outside of the radiation protectors. To measure X-ray scatter with the anthropomorphic phantom model, the dose was measured at 3 distances (20, 50, 100 cm) and 3 angles (horizontal, upward 45°, downward 45°) using a personal gamma radiation dosimeter, Ecotest CARD DKG-21, for 1, 3, 5, 10 minutes. Results Lifetime attributable risk of cancer was estimated using the approach of the Biological Effects of Ionizing Radiation report VII. The 6-month ED of vascular surgeons and scrub nurses were 3.85, 1.31 mSv, respectively. The attenuation rate of lead apron, neck protector and goggle were 74.6%, 60.6%, and 70.1%, respectively. All cancer incidences among surgeons and scrub nurses correspond to 2,355 and 795 per 100,000 persons. The 10-minute dose at 100-cm distance was 0.004 mSv at horizontal, 0.009 mSv at downward 45°, 0.003 mSv at upward 45°. Conclusion Although yearly radiation hazards for vascular surgeons and scrub nurses are still within safety guidelines, protection principles can never be too stringent when aiming to minimize the cumulative harmful effects. PMID:28289670

  11. Calculation of the Thermal Radiation Benchmark Problems for a CANDU Fuel Channel Analysis Using the CFX-10 Code

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyoung Tae; Park, Joo Hwan; Rhee, Bo Wook

    2006-07-15

    To justify the use of a commercial Computational Fluid Dynamics (CFD) code for a CANDU fuel channel analysis, especially for the radiation heat transfer dominant conditions, the CFX-10 code is tested against three benchmark problems which were used for the validation of a radiation heat transfer in the CANDU analysis code, a CATHENA. These three benchmark problems are representative of the CANDU fuel channel configurations from a simple geometry to whole fuel channel geometry. With assumptions of a non-participating medium completely enclosed with the diffuse, gray and opaque surfaces, the solutions of the benchmark problems are obtained by the concept of surface resistance to radiation accounting for the view factors and the emissivities. The view factors are calculated by the program MATRIX version 1.0 avoiding the difficulty of hand calculation for the complex geometries. For the solutions of the benchmark problems, the temperature or the net radiation heat flux boundary conditions are prescribed for each radiating surface to determine the radiation heat transfer rate or the surface temperature, respectively by using the network method. The Discrete Transfer Model (DTM) is used for the CFX-10 radiation model and its calculation results are compared with the solutions of the benchmark problems. The CFX-10 results for the three benchmark problems are in close agreement with these solutions, so it is concluded that the CFX-10 with a DTM radiation model can be applied to the CANDU fuel channel analysis where a surface radiation heat transfer is a dominant mode of the heat transfer.

  12. Hybrid optical-thermal devices and materials for light manipulation and radiative cooling

    CERN Document Server

    Boriskina, Svetlana V; Hsu, Wei-Chun; Weinstein, Lee; Huang, Xiaopeng; Loomis, James; Xu, Yanfei; Chen, Gang

    2015-01-01

    We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna with sub-wavelength light focusing, which simultaneously enables intensity enhancement at the operating wavelength in the visible and reduction of the operating temperature. The enhancement is achieved via light recycling in the form of whispering-gallery modes trapped in an optical microcavity, while cooling functionality is realized via a combination of reduced optical absorption and radiative cooling. The other example is a fabric that is opaque in the visible range yet highly transparent in the infrared, which allows the human body to efficiently shed energy in the form of thermal emission. Such fabrics can find...

  13. Non-Radiative Energy Transfer Mediated by Hybrid Light-Matter States.

    Science.gov (United States)

    Zhong, Xiaolan; Chervy, Thibault; Wang, Shaojun; George, Jino; Thomas, Anoop; Hutchison, James A; Devaux, Eloise; Genet, Cyriaque; Ebbesen, Thomas W

    2016-05-17

    We present direct evidence of enhanced non-radiative energy transfer between two J-aggregated cyanine dyes strongly coupled to the vacuum field of a cavity. Excitation spectroscopy and femtosecond pump-probe measurements show that the energy transfer is highly efficient when both the donor and acceptor form light-matter hybrid states with the vacuum field. The rate of energy transfer is increased by a factor of seven under those conditions as compared to the normal situation outside the cavity, with a corresponding effect on the energy transfer efficiency. The delocalized hybrid states connect the donor and acceptor molecules and clearly play the role of a bridge to enhance the rate of energy transfer. This finding has fundamental implications for coherent energy transport and light-energy harvesting.

  14. Identification of differentially expressed radiation-induced genes in cervix carcinoma cells using suppression subtractive hybridization

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jun Sang; Lee, Young Sook; Lee, Jeung Hoon; Lee, Woong Hee; Seo, Eun Young; Cho, Moon June [Chungnam National University, Daejeon (Korea, Republic of)

    2005-03-15

    A number of genes and their products are induced early or late following exposure of cells to ionizing radiation. These radiation-induced genes have various effects of irradiated cells and tissues. Suppression subtractive hybridization (SSH) based on PCR was used to identify the differentially expressed genes by radiation in cervix carcinoma cells. Total RNA and poly (A){sup +} mRNA were isolated from irradiated and non-irradiated HeLa cells. Forward-and reverse-subtracted cDNA libraries were constructed using SSH. Eighty-eight clones of each were used to randomly select differentially expressed genes using reverse Northern blotting (dot blot analysis). Northern blotting was used to verify the screened genes. Of the 176 clones, 10 genes in the forward-subtracted library and 9 genes in the reverse-subtracted library were identified as differentially expressed radiation-induced genes by PCR-select differential screening. Three clones from the forward-subtracted library were confirmed by Northern blotting, and showed increased expression in a dose-dependent manner, including a telomerase catalytic subunit and sodium channel-like protein gene, and an ESTs (expressed sequence tags) gene. We identified differentially expressed radiation-induced genes with low-abundance genes with SSH, but further characterization of theses genes are necessary to clarify the biological functions of them.

  15. Use of generalized curvilinear coordinate systems in electromagnetic and hybrid codes

    Energy Technology Data Exchange (ETDEWEB)

    Swift, D.W. [Univ. of Alaska, Fairbanks, AK (United States)

    1995-07-01

    The author develops a code to simulate the dynamics in the magnetosphere system. The calculation involves a single level, structured, curvilinear 2D mesh. The mesh density is varied to support regions which demand higher resolution.

  16. Application of wavelet filtering and Barker-coded pulse compression hybrid method to air-coupled ultrasonic testing

    Science.gov (United States)

    Zhou, Zhenggan; Ma, Baoquan; Jiang, Jingtao; Yu, Guang; Liu, Kui; Zhang, Dongmei; Liu, Weiping

    2014-10-01

    Air-coupled ultrasonic testing (ACUT) technique has been viewed as a viable solution in defect detection of advanced composites used in aerospace and aviation industries. However, the giant mismatch of acoustic impedance in air-solid interface makes the transmission efficiency of ultrasound low, and leads to poor signal-to-noise (SNR) ratio of received signal. The utilisation of signal-processing techniques in non-destructive testing is highly appreciated. This paper presents a wavelet filtering and phase-coded pulse compression hybrid method to improve the SNR and output power of received signal. The wavelet transform is utilised to filter insignificant components from noisy ultrasonic signal, and pulse compression process is used to improve the power of correlated signal based on cross-correction algorithm. For the purpose of reasonable parameter selection, different families of wavelets (Daubechies, Symlet and Coiflet) and decomposition level in discrete wavelet transform are analysed, different Barker codes (5-13 bits) are also analysed to acquire higher main-to-side lobe ratio. The performance of the hybrid method was verified in a honeycomb composite sample. Experimental results demonstrated that the proposed method is very efficient in improving the SNR and signal strength. The applicability of the proposed method seems to be a very promising tool to evaluate the integrity of high ultrasound attenuation composite materials using the ACUT.

  17. Modeling the physical structure of star-forming regions with LIME, a 3D radiative transfer code

    Science.gov (United States)

    Quénard, D.; Bottinelli, S.; Caux, E.

    2016-05-01

    The ability to predict line emission is crucial in order to make a comparison with observations. From LTE to full radiative transfer codes, the goal is always to derive the most accurately possible the physical properties of the source. Non-LTE calculations can be very time consuming but are needed in most of the cases since many studied regions are far from LTE.

  18. FitSKIRT: genetic algorithms to automatically fit dusty galaxies with a Monte Carlo radiative transfer code

    CERN Document Server

    De Geyter, Gert; Fritz, Jacopo; Camps, Peter

    2012-01-01

    We present FitSKIRT, a method to efficiently fit radiative transfer models to UV/optical images of dusty galaxies. These images have the advantage that they have better spatial resolution compared to FIR/submm data. FitSKIRT uses the GAlib genetic algorithm library to optimize the output of the SKIRT Monte Carlo radiative transfer code. Genetic algorithms prove to be a valuable tool in handling the multi- dimensional search space as well as the noise induced by the random nature of the Monte Carlo radiative transfer code. FitSKIRT is tested on artificial images of a simulated edge-on spiral galaxy, where we gradually increase the number of fitted parameters. We find that we can recover all model parameters, even if all 11 model parameters are left unconstrained. Finally, we apply the FitSKIRT code to a V-band image of the edge-on spiral galaxy NGC4013. This galaxy has been modeled previously by other authors using different combinations of radiative transfer codes and optimization methods. Given the different...

  19. Application of system identification modelling to solar hybrid systems for predicting radiation, temperature and load

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, S.; Matsumoto, Tsuyoshi; Kojima, Toshinori [Seikei University, Tokyo (Japan). Dept. of Industrial Chemistry; Sanjay Kumar [Kyoto University (Japan). Dept. of Global Environment Engineering

    2001-03-01

    Uncertainties in local solar radiation, ambient temperature and thermal load data have been one of the major factors limiting the reliability and efficiency of solar thermal hybrid systems. In the present paper, moving average auto regressive erogenous (ARX) model based reasoning has been mooted and modified to include moving average method, as an effective tool for predictions of these data. The results show that the method is quite robust and is capable of predicting fairly accurate results, which would make these systems more viable in areas where meteorological data are not available or vague. (author)

  20. Simulating radiative astrophysical flows with the PLUTO code: A non-equilibrium, multi-species cooling function

    CERN Document Server

    Tesileanu, O; Massaglia, S

    2008-01-01

    Time-dependent cooling processes are of paramount importance in the evolution of astrophysical gaseous nebulae and, in particular, when radiative shocks are present. The present work introduces a necessary set of tools that can be used to model radiative astrophysical flows in the optically-thin plasma limit. We aim to provide reliable and accurate predictions of emission line ratios and radiative cooling losses in astrophysical simulations of shocked flows. Moreover, we discuss numerical implementation aspects to ease future improvements and implementation in other MHD numerical codes. The most important source of radiative cooling for our plasma conditions comes from the collisionally-excited line radiation. We evolve a chemical network, including 29 ion species, to compute the ionization balance in non-equilibrium conditions. After a series of validations and tests, typical astrophysical setups are simulated in 1D and 2D, employing both the present cooling model and a simplified one. The influence of the c...

  1. Pymiedap: a versatile radiative transfer code with polarization for terrestrial (exo)planets.

    Science.gov (United States)

    Rossi, Loïc; Stam, Daphne; Hogenboom, Michael

    2016-04-01

    Polarimetry promises to be an important method to detect exoplanets: the light of a star is usually unpolarized te{kemp1987} while scattering by gas and clouds in an atmosphere can generate high levels of polarization. Furthermore, the polarization of scattered light contains information about the properties of the atmosphere and surface of a planet, allowing a possible characterization te{stam2008}, a method already validated in the solar system with Venus te{hansen1974,rossi2015}. We present here Pymiedap (Python Mie Doubling-Adding Program): a set of Python objects interfaced with Fortran radiative transfer codes that allows to define a planetary atmosphere and compute the flux and polarization of the light that is scattered. Several different properties of the planet can be set interactively by the user through the Python interface such as gravity, distance to the star, surface properties, atmospheric layers, gaseous and aerosol composition. The radiative transfer calculations are then computed following the doubling-adding method te{deHaan1987}. We present some results of the code and show its possible use for different planetary atmospheres for both resolved and disk-integrated measurements. We investigate the effect of gas, clouds and aerosols composition and surface properties for horizontally homogeneous and inhomogenous planets, in the case of Earth-like planets. We also study the effect of gaseous absorption on the flux and polarization as a marker for gaseous abundance and cloud top altitude. [1]{kemp1987} Kemp et al. The optical polarization of the sun measured at a sensitivity of parts in ten million. Nature, 1987, 326, 270-273 [2]{stam2008} Stam, D. M. Spectropolarimetric signatures of Earth-like extrasolar planets. A&A, 2008, 482, 989-1007 [3]{hansen1974} Hansen, J. E. & Hovenier, J. W. Interpretation of the polarization of Venus. Journal of Atmospheric Sciences, 1974, 31, 1137-1160 [4]{rossi2015} Rossi et al. Preliminary study of Venus cloud layers

  2. Accurate dose assessment system for an exposed person utilising radiation transport calculation codes in emergency response to a radiological accident.

    Science.gov (United States)

    Takahashi, F; Shigemori, Y; Seki, A

    2009-01-01

    A system has been developed to assess radiation dose distribution inside the body of exposed persons in a radiological accident by utilising radiation transport calculation codes-MCNP and MCNPX. The system consists mainly of two parts, pre-processor and post-processor of the radiation transport calculation. Programs for the pre-processor are used to set up a 'problem-dependent' input file, which defines the accident condition and dosimetric quantities to be estimated. The program developed for the post-processor part can effectively indicate dose information based upon the output file of the code. All of the programs in the dosimetry system can be executed with a generally used personal computer and accurately give the dose profile to an exposed person in a radiological accident without complicated procedures. An experiment using a physical phantom was carried out to verify the availability of the dosimetry system with the developed programs in a gamma ray irradiation field.

  3. Collection of regulatory texts relative to radiation protection. Part 2: orders and decisions taken in application of the Public Health Code and Labour Code concerning the protection of populations, patients and workers against the risks of ionizing radiations; Recueil de textes reglementaires relatifs a la radioprotection. Partie 2: arretes et decisions pris en application du Code de Sante Publique et du Code du Travail concernant la protection de la population, des patients et des travailleurs contre les dangers des rayonnements ionisants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-05-15

    This collection of texts includes the general measures of population protection, exposure to natural radiations, general system of authorizations and statements, protection of persons exposed to ionizing radiations for medical purpose, situations of radiological emergency and long exposure to ionizing radiations, penal dispositions, application of the Public Health code and application of the Labour code. Chronological contents by date of publication is given. (N.C.)

  4. A new hybrid algorithm for solving transient combined conduction radiation heat transfer problems

    Directory of Open Access Journals (Sweden)

    Chaabane Raoudha

    2011-01-01

    Full Text Available A new algorithm based on the lattice Boltzmann method (LBM and the Control Volume Finite Element Method (CVFEM is proposed as an hybrid solver for two dimensional transient conduction and radiation heat transfer problems in an optically emitting, absorbing and scattering medium. The LBM was used to solve the energy equation and the CVFEM was used to compute the radiative information. The advantages of the proposed methodology is to avoid problems that confronted when previous techniques are used to predict radiative heat transfer, essentially, in complex geometries and when there is scattering and/or non-black boundaries surfaces. This method combination, which is applied for the first time to solve this unsteady combined mode of heat transfer, has been found to accurately predict the effects of various thermo-physical parameters such as the scattering albedo, the conduction-radiation parameter and the extinction coefficient on temperature distribution. The results of the LBM-CVFEM combination were found to be in excellent agreement with the LBM-CDM (Collapsed Dimension Methodthis proposed numerical approach include, among others, simple implementation on a computer, accurate CPU time, and capability of stable simulation.

  5. Modelling emission turbulence-radiation interaction by using a hybrid flamelet/stochastic Eulerian field method

    Science.gov (United States)

    Consalvi, Jean-Louis

    2017-01-01

    The time-averaged Radiative Transfer Equation (RTE) introduces two unclosed terms, known as `absorption Turbulence Radiation Interaction (TRI)' and `emission TRI'. Emission TRI is related to the non-linear coupling between fluctuations of the absorption coefficient and fluctuations of the Planck function and can be described without introduction any approximation by using a transported PDF method. In this study, a hybrid flamelet/ Stochastic Eulerian Field Model is used to solve the transport equation of the one-point one-time PDF. In this formulation, the steady laminar flamelet model (SLF) is coupled to a joint Probability Density Function (PDF) of mixture fraction, enthalpy defect, scalar dissipation rate, and soot quantities and the PDF transport equation is solved by using a Stochastic Eulerian Field (SEF) method. Soot production is modeled by a semi-empirical model and the spectral dependence of the radiatively participating species, namely combustion products and soot, are computed by using a Narrow Band Correlated-k (NBCK) model. The model is applied to simulate an ethylene/methane turbulent jet flame burning in an oxygen-enriched environment. Model results are compared with the experiments and the effects of taken into account Emission TRI on flame structure, soot production and radiative loss are discussed.

  6. Multiple description coding with spatial-temporal hybrid interpolation for video streaming in peer-to-peer networks

    Institute of Scientific and Technical Information of China (English)

    LU Meng-ting; LIN Chang-kuan; YAO Jason; CHEN Homer H.

    2006-01-01

    In this paper, we present an innovative design of multiple description coding with spatial-temporal hybrid interpolation (MDC-STHI) for peer-to-peer (P2P) video streaming. MDC can be effective in P2P networks because the nature of overlay routing makes path diversity more feasible. However, most MDC schemes require a redesign of video coding systems and are not cost-effective for wide deployment. We base our work on multiple state video coding, a form of MDC that can utilize standard codecs. Two quarter-sized video bit streams are generated as redundancies and embedded in the original-sized streams. With MDC-STHI, the nodes in P2P network can adjust the streaming traffic to satisfy the constraints of their devices and network environment. By design, the redundancies are used to compensate for missing frames, and can also be streamed independently to fulfill certain needs of low rate, low resolution applications. For better error concealment, optimal weights for spatial and temporal interpolation are determined at the source, quantized, and included in redundancies.

  7. XTAT: A New Multilevel-Multiline Polarized Radiative Transfer Code with PRD

    Science.gov (United States)

    Bommier, V.

    2014-10-01

    This work is intended to the interpretation of the so-called "Second Solar Spectrum" (Stenflo 1996), which is the spectrum of the linear polarization formed by scattering and observed close to the solar internal limb. The lines are also optically thick, and the problem is to solve in a coherent manner, the statistical equilibrium of the atomic density matrix and the polarized radiative transfer in the atmosphere. Following Belluzzi & Landi Degl'Innocenti (2009), 30 % of the solar visible line linear polarization profiles display the M-type shape typical of coherent scattering effect in the far wings. A new theory including both coherent (Rayleigh) and resonant scatterings was developed by Bommier (1997a,b). Raman scattering was later added (Bommier 1999, SPW2). In this theory, which is straightly derived from the Schrödinger equation for the atomic density matrix, the radiative line broadening appears as a non-Markovian process of atom-photon interaction. The collisional broadening is included. The Rayleigh (Raman) scattering appears as an additional term in the emissivity from the fourth order of the atom-photon interaction perturbation development. The development is pursued and finally summed up, leading to a non-perturbative final result. In this formalism, the use of redistribution functions is avoided. The published formalism was limited to the two-level atom without lower level alignment. But most of the solar lines are more complex. We will present how the theory has to be complemented for multi-level atom modeling, including lower level alignment. The role of the collisions as balancing coherent and resonant scatterings is fully taken into account. Progress report will be given about the development of a new code for the numerical iterative solution of the statistical equilibrium and polarized radiative transfer equations, for multi-level atoms and their multi-line spectrum. Fine and hyperfine structures, and Hanle, Kemp (Kemp et al. 1984), Zeeman

  8. C5 Benchmark Problem with Discrete Ordinate Radiation Transport Code DENOVO

    Energy Technology Data Exchange (ETDEWEB)

    Yesilyurt, Gokhan [ORNL; Clarno, Kevin T [ORNL; Evans, Thomas M [ORNL; Davidson, Gregory G [ORNL; Fox, Patricia B [ORNL

    2011-01-01

    The C5 benchmark problem proposed by the Organisation for Economic Co-operation and Development/Nuclear Energy Agency was modeled to examine the capabilities of Denovo, a three-dimensional (3-D) parallel discrete ordinates (S{sub N}) radiation transport code, for problems with no spatial homogenization. Denovo uses state-of-the-art numerical methods to obtain accurate solutions to the Boltzmann transport equation. Problems were run in parallel on Jaguar, a high-performance supercomputer located at Oak Ridge National Laboratory. Both the two-dimensional (2-D) and 3-D configurations were analyzed, and the results were compared with the reference MCNP Monte Carlo calculations. For an additional comparison, SCALE/KENO-V.a Monte Carlo solutions were also included. In addition, a sensitivity analysis was performed for the optimal angular quadrature and mesh resolution for both the 2-D and 3-D infinite lattices of UO{sub 2} fuel pin cells. Denovo was verified with the C5 problem. The effective multiplication factors, pin powers, and assembly powers were found to be in good agreement with the reference MCNP and SCALE/KENO-V.a Monte Carlo calculations.

  9. Exo-Transmit: Radiative transfer code for calculating exoplanet transmission spectra

    Science.gov (United States)

    Kempton, Eliza M.-R.; Lupu, Roxana E.; Owusu-Asare, Albert; Slough, Patrick; Cale, Bryson

    2016-11-01

    Exo-Transmit calculates the transmission spectrum of an exoplanet atmosphere given specified input information about the planetary and stellar radii, the planet's surface gravity, the atmospheric temperature-pressure (T-P) profile, the location (in terms of pressure) of any cloud layers, the composition of the atmosphere, and opacity data for the atoms and molecules that make up the atmosphere. The code solves the equation of radiative transfer for absorption of starlight passing through the planet's atmosphere as it transits, accounting for the oblique path of light through the planetary atmosphere along an Earth-bound observer's line of sight. The fraction of light absorbed (or blocked) by the planet plus its atmosphere is calculated as a function of wavelength to produce the wavelength-dependent transmission spectrum. Functionality is provided to simulate the presence of atmospheric aerosols in two ways: an optically thick (gray) cloud deck can be generated at a user-specified height in the atmosphere, and the nominal Rayleigh scattering can be increased by a specified factor.

  10. Recent Developments in the VISRAD 3-D Target Design and Radiation Simulation Code

    Science.gov (United States)

    Macfarlane, Joseph; Woodruff, P.; Golovkin, I.

    2011-10-01

    The 3-D view factor code VISRAD is widely used in designing HEDP experiments at major laser and pulsed-power facilities, including NIF, OMEGA, OMEGA-EP, ORION, Z, and PLX. It simulates target designs by generating a 3-D grid of surface elements, utilizing a variety of 3-D primitives and surface removal algorithms, and can be used to compute the radiation flux throughout the surface element grid by computing element-to-element view factors and solving power balance equations. Target set-up and beam pointing are facilitated by allowing users to specify positions and angular orientations using a variety of coordinates systems (e . g . , that of any laser beam, target component, or diagnostic port). Analytic modeling for laser beam spatial profiles for OMEGA DPPs and NIF CPPs is used to compute laser intensity profiles throughout the grid of surface elements. VISRAD includes a variety of user-friendly graphics for setting up targets and displaying results, can readily display views from any point in space, and can be used to generate image sequences for animations. We will discuss recent improvements to the software package and plans for future developments.

  11. Numerical Weather Prediction (NWP) and hybrid ARMA/ANN model to predict global radiation

    CERN Document Server

    Voyant, Cyril; Paoli, Christophe; Nivet, Marie Laure

    2012-01-01

    We propose in this paper an original technique to predict global radiation using a hybrid ARMA/ANN model and data issued from a numerical weather prediction model (ALADIN). We particularly look at the Multi-Layer Perceptron. After optimizing our architecture with ALADIN and endogenous data previously made stationary and using an innovative pre-input layer selection method, we combined it to an ARMA model from a rule based on the analysis of hourly data series. This model has been used to forecast the hourly global radiation for five places in Mediterranean area. Our technique outperforms classical models for all the places. The nRMSE for our hybrid model ANN/ARMA is 14.9% compared to 26.2% for the na\\"ive persistence predictor. Note that in the stand alone ANN case the nRMSE is 18.4%. Finally, in order to discuss the reliability of the forecaster outputs, a complementary study concerning the confidence interval of each prediction is proposed

  12. Nanostructure of PDMS–TEOS–PrZr hybrids prepared by direct deposition of gamma radiation energy

    Energy Technology Data Exchange (ETDEWEB)

    Lancastre, Joana J.H., E-mail: jlancastre@ctn.ist.utl.pt [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Falcão, António N. [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Margaça, Fernanda M.A., E-mail: fmargaca@ctn.ist.utl.pt [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Ferreira, Luís M. [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Miranda Salvado, Isabel M. [CICECO & Departamento de Engenharia de Materiais e Cerâmica, Universidade de Aveiro, Campus de Santiago, 3810-193 Aveiro (Portugal); Almásy, László [Wigner Research Centre for Physics, Institute for Solid State Physics and Optics, PO Box 49, 1525 Budapest (Hungary); Casimiro, Maria H. [REQUIMTE/CQFB, Departamento de Química, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Meiszterics, Anikó [Gedeon Richter Ltd., PO Box 27, H-1475 Budapest (Hungary)

    2015-10-15

    Highlights: • Hybrid materials were prepared by direct energy deposition. • The influence of the catalyst content (PrZr) was investigated. • The developed oxide network was found to be strongly dependent on the PrZr content. • A model is proposed for the development of the oxide network in these materials. - Abstract: Organic–inorganic materials have been the object of intense research due to their wide range of properties and therefore innumerous applications. We prepared organic–inorganic hybrid materials by direct energy deposition on a mixture of polydimethylsiloxane silanol terminated (33 wt% fixed content), tetraethylorthosilicate and a minor content of zirconium propoxide that varied from 1 to 5 wt% using gamma radiation from a Co-60 source. The samples, dried in air at room temperature, are bulk, flexible and transparent. Their nanostructure was investigated by small angle neutron scattering. It was found that the inorganic oxide network has fractal structure, which becomes denser as the zirconium propoxide content decreases. The results suggest that oxide nanosized regions grow from the OH terminal group of PDMS which are the condensation seeds. Their number and position remains unaltered with the variation of zirconium propoxide content that only affects their microstructure. A model is proposed for the nanostructure of the oxide network that develops in the irradiation processed hybrid materials.

  13. Low complexity source and channel coding for mm-wave hybrid fiber-wireless links

    DEFF Research Database (Denmark)

    Lebedev, Alexander; Vegas Olmos, Juan José; Pang, Xiaodan;

    2014-01-01

    performance of several encoded high-definition video sequences constrained by the channel bitrate and the packet size. We argue that light video compression and low complexity channel coding for the W-band fiber-wireless link enable low-delay multiple channel 1080p wireless HD video transmission....

  14. A fully parallel, high precision, N-body code running on hybrid computing platforms

    CERN Document Server

    Capuzzo-Dolcetta, R; Punzo, D

    2012-01-01

    We present a new implementation of the numerical integration of the classical, gravitational, N-body problem based on a high order Hermite's integration scheme with block time steps, with a direct evaluation of the particle-particle forces. The main innovation of this code (called HiGPUs) is its full parallelization, exploiting both OpenMP and MPI in the use of the multicore Central Processing Units as well as either Compute Unified Device Architecture (CUDA) or OpenCL for the hosted Graphic Processing Units. We tested both performance and accuracy of the code using up to 256 GPUs in the supercomputer IBM iDataPlex DX360M3 Linux Infiniband Cluster provided by the italian supercomputing consortium CINECA, for values of N up to 8 millions. We were able to follow the evolution of a system of 8 million bodies for few crossing times, task previously unreached by direct summation codes. The code is freely available to the scientific community.

  15. Study of the source term of radiation of the CDTN GE-PET trace 8 cyclotron with the MCNPX code

    Energy Technology Data Exchange (ETDEWEB)

    Benavente C, J. A.; Lacerda, M. A. S.; Fonseca, T. C. F.; Da Silva, T. A. [Centro de Desenvolvimento da Tecnologia Nuclear / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil); Vega C, H. R., E-mail: jhonnybenavente@gmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico)

    2015-10-15

    Full text: The knowledge of the neutron spectra in a PET cyclotron is important for the optimization of radiation protection of the workers and individuals of the public. The main objective of this work is to study the source term of radiation of the GE-PET trace 8 cyclotron of the Development Center of Nuclear Technology (CDTN/CNEN) using computer simulation by the Monte Carlo method. The MCNPX version 2.7 code was used to calculate the flux of neutrons produced from the interaction of the primary proton beam with the target body and other cyclotron components, during 18F production. The estimate of the source term and the corresponding radiation field was performed from the bombardment of a H{sub 2}{sup 18}O target with protons of 75 μA current and 16.5 MeV of energy. The values of the simulated fluxes were compared with those reported by the accelerator manufacturer (GE Health care Company). Results showed that the fluxes estimated with the MCNPX codes were about 70% lower than the reported by the manufacturer. The mean energies of the neutrons were also different of that reported by GE Health Care. It is recommended to investigate other cross sections data and the use of physical models of the code itself for a complete characterization of the source term of radiation. (Author)

  16. Channel Efficiency with Security Enhancement for Remote Condition Monitoring of Multi Machine System Using Hybrid Huffman Coding

    Science.gov (United States)

    Datta, Jinia; Chowdhuri, Sumana; Bera, Jitendranath

    2016-12-01

    This paper presents a novel scheme of remote condition monitoring of multi machine system where a secured and coded data of induction machine with different parameters is communicated between a state-of-the-art dedicated hardware Units (DHU) installed at the machine terminal and a centralized PC based machine data management (MDM) software. The DHUs are built for acquisition of different parameters from the respective machines, and hence are placed at their nearby panels in order to acquire different parameters cost effectively during their running condition. The MDM software collects these data through a communication channel where all the DHUs are networked using RS485 protocol. Before transmitting, the parameter's related data is modified with the adoption of differential pulse coded modulation (DPCM) and Huffman coding technique. It is further encrypted with a private key where different keys are used for different DHUs. In this way a data security scheme is adopted during its passage through the communication channel in order to avoid any third party attack into the channel. The hybrid mode of DPCM and Huffman coding is chosen to reduce the data packet length. A MATLAB based simulation and its practical implementation using DHUs at three machine terminals (one healthy three phase, one healthy single phase and one faulty three phase machine) proves its efficacy and usefulness for condition based maintenance of multi machine system. The data at the central control room are decrypted and decoded using MDM software. In this work it is observed that Chanel efficiency with respect to different parameter measurements has been increased very much.

  17. Radiation Protection Studies for Medical Particle Accelerators using Fluka Monte Carlo Code.

    Science.gov (United States)

    Infantino, Angelo; Cicoria, Gianfranco; Lucconi, Giulia; Pancaldi, Davide; Vichi, Sara; Zagni, Federico; Mostacci, Domiziano; Marengo, Mario

    2017-04-01

    Radiation protection (RP) in the use of medical cyclotrons involves many aspects both in the routine use and for the decommissioning of a site. Guidelines for site planning and installation, as well as for RP assessment, are given in international documents; however, the latter typically offer analytic methods of calculation of shielding and materials activation, in approximate or idealised geometry set-ups. The availability of Monte Carlo (MC) codes with accurate up-to-date libraries for transport and interaction of neutrons and charged particles at energies below 250 MeV, together with the continuously increasing power of modern computers, makes the systematic use of simulations with realistic geometries possible, yielding equipment and site-specific evaluation of the source terms, shielding requirements and all quantities relevant to RP at the same time. In this work, the well-known FLUKA MC code was used to simulate different aspects of RP in the use of biomedical accelerators, particularly for the production of medical radioisotopes. In the context of the Young Professionals Award, held at the IRPA 14 conference, only a part of the complete work is presented. In particular, the simulation of the GE PETtrace cyclotron (16.5 MeV) installed at S. Orsola-Malpighi University Hospital evaluated the effective dose distribution around the equipment; the effective number of neutrons produced per incident proton and their spectral distribution; the activation of the structure of the cyclotron and the vault walls; the activation of the ambient air, in particular the production of 41Ar. The simulations were validated, in terms of physical and transport parameters to be used at the energy range of interest, through an extensive measurement campaign of the neutron environmental dose equivalent using a rem-counter and TLD dosemeters. The validated model was then used in the design and the licensing request of a new Positron Emission Tomography facility. © The Author 2016

  18. Hybrid parallel code acceleration methods in full-core reactor physics calculations

    Energy Technology Data Exchange (ETDEWEB)

    Courau, T.; Plagne, L.; Ponicot, A. [EDF R and D, 1, Avenue du General de Gaulle, 92141 Clamart Cedex (France); Sjoden, G. [Nuclear and Radiological Engineering, Georgia Inst. of Technology, Atlanta, GA 30332 (United States)

    2012-07-01

    When dealing with nuclear reactor calculation schemes, the need for three dimensional (3D) transport-based reference solutions is essential for both validation and optimization purposes. Considering a benchmark problem, this work investigates the potential of discrete ordinates (Sn) transport methods applied to 3D pressurized water reactor (PWR) full-core calculations. First, the benchmark problem is described. It involves a pin-by-pin description of a 3D PWR first core, and uses a 8-group cross-section library prepared with the DRAGON cell code. Then, a convergence analysis is performed using the PENTRAN parallel Sn Cartesian code. It discusses the spatial refinement and the associated angular quadrature required to properly describe the problem physics. It also shows that initializing the Sn solution with the EDF SPN solver COCAGNE reduces the number of iterations required to converge by nearly a factor of 6. Using a best estimate model, PENTRAN results are then compared to multigroup Monte Carlo results obtained with the MCNP5 code. Good consistency is observed between the two methods (Sn and Monte Carlo), with discrepancies that are less than 25 pcm for the k{sub eff}, and less than 2.1% and 1.6% for the flux at the pin-cell level and for the pin-power distribution, respectively. (authors)

  19. Improvements of the Radiation Code "MstrnX" in AORI/NIES/JAMSTEC Models

    Science.gov (United States)

    Sekiguchi, M.; Suzuki, K.; Takemura, T.; Watanabe, M.; Ogura, T.

    2015-12-01

    There is a large demand for an accurate yet rapid radiation transfer scheme accurate for general climate models. The broadband radiative transfer code "mstrnX", ,which was developed by Atmosphere and Ocean Research Institute (AORI) and was implemented in several global and regional climate models cooperatively developed in the Japanese research community, for example, MIROC (the Model for Interdisciplinary Research on Climate) [Watanabe et al., 2010], NICAM (Non-hydrostatic Icosahedral Atmospheric Model) [Satoh et al, 2008], and CReSS (Cloud Resolving Storm Simulator) [Tsuboki and Sakakibara, 2002]. In this study, we improve the gas absorption process and the scattering process of ice particles. For update of gas absorption process, the absorption line database is replaced by the latest versions of the Harvard-Smithsonian Center, HITRAN2012. An optimization method is adopted in mstrnX to decrease the number of integration points for the wavenumber integration using the correlated k-distribution method and to increase the computational efficiency in each band. The integration points and weights of the correlated k-distribution are optimized for accurate calculation of the heating rate up to altitude of 70 km. For this purpose we adopted a new non-linear optimization method of the correlated k-distribution and studied an optimal initial condition and the cost function for the non-linear optimization. It is known that mstrnX has a considerable bias in case of quadrapled carbon dioxide concentrations [Pincus et al., 2015], however, the bias is decreased by this improvement. For update of scattering process of ice particles, we adopt a solid column as an ice crystal habit [Yang et al., 2013]. The single scattering properties are calculated and tabulated in advance. The size parameter of this table is ranged from 0.1 to 1000 in mstrnX, we expand the maximum to 50000 in order to correspond to large particles, like fog and rain drop. Those update will be introduced to

  20. A Hybrid Scheme Based on Pipelining and Multitasking in Mobile Application Processors for Advanced Video Coding

    Directory of Open Access Journals (Sweden)

    Muhammad Asif

    2015-01-01

    Full Text Available One of the key requirements for mobile devices is to provide high-performance computing at lower power consumption. The processors used in these devices provide specific hardware resources to handle computationally intensive video processing and interactive graphical applications. Moreover, processors designed for low-power applications may introduce limitations on the availability and usage of resources, which present additional challenges to the system designers. Owing to the specific design of the JZ47x series of mobile application processors, a hybrid software-hardware implementation scheme for H.264/AVC encoder is proposed in this work. The proposed scheme distributes the encoding tasks among hardware and software modules. A series of optimization techniques are developed to speed up the memory access and data transferring among memories. Moreover, an efficient data reusage design is proposed for the deblock filter video processing unit to reduce the memory accesses. Furthermore, fine grained macroblock (MB level parallelism is effectively exploited and a pipelined approach is proposed for efficient utilization of hardware processing cores. Finally, based on parallelism in the proposed design, encoding tasks are distributed between two processing cores. Experiments show that the hybrid encoder is 12 times faster than a highly optimized sequential encoder due to proposed techniques.

  1. OpenGeoSys-GEMS: Hybrid parallelization of a reactive transport code with MPI and threads

    Science.gov (United States)

    Kosakowski, G.; Kulik, D. A.; Shao, H.

    2012-04-01

    OpenGeoSys-GEMS is a generic purpose reactive transport code based on the operator splitting approach. The code couples the Finite-Element groundwater flow and multi-species transport modules of the OpenGeoSys (OGS) project (http://www.ufz.de/index.php?en=18345) with the GEM-Selektor research package to model thermodynamic equilibrium of aquatic (geo)chemical systems utilizing the Gibbs Energy Minimization approach (http://gems.web.psi.ch/). The combination of OGS and the GEM-Selektor kernel (GEMS3K) is highly flexible due to the object-oriented modular code structures and the well defined (memory based) data exchange modules. Like other reactive transport codes, the practical applicability of OGS-GEMS is often hampered by the long calculation time and large memory requirements. • For realistic geochemical systems which might include dozens of mineral phases and several (non-ideal) solid solutions the time needed to solve the chemical system with GEMS3K may increase exceptionally. • The codes are coupled in a sequential non-iterative loop. In order to keep the accuracy, the time step size is restricted. In combination with a fine spatial discretization the time step size may become very small which increases calculation times drastically even for small 1D problems. • The current version of OGS is not optimized for memory use and the MPI version of OGS does not distribute data between nodes. Even for moderately small 2D problems the number of MPI processes that fit into memory of up-to-date workstations or HPC hardware is limited. One strategy to overcome the above mentioned restrictions of OGS-GEMS is to parallelize the coupled code. For OGS a parallelized version already exists. It is based on a domain decomposition method implemented with MPI and provides a parallel solver for fluid and mass transport processes. In the coupled code, after solving fluid flow and solute transport, geochemical calculations are done in form of a central loop over all finite

  2. Investigation of Solar Hybrid Electric/Thermal System with Radiation Concentrator and Thermoelectric Generator

    Directory of Open Access Journals (Sweden)

    Edgar Arturo Chávez Urbiola

    2013-01-01

    Full Text Available An experimental study of a solar-concentrating system based on thermoelectric generators (TEGs was performed. The system included an electrical generating unit with 6 serially connected TEGs using a traditional semiconductor material, Bi2Te3, which was illuminated by concentrated solar radiation on one side and cooled by running water on the other side. A sun-tracking concentrator with a mosaic set of mirrors was used; its orientation towards the sun was achieved with two pairs of radiation sensors, a differential amplifier, and two servomotors. The hot side of the TEGs at midday has a temperature of around 200°C, and the cold side is approximately 50°C. The thermosiphon cooling system was designed to absorb the heat passing through the TEGs and provide optimal working conditions. The system generates 20 W of electrical energy and 200 W of thermal energy stored in water with a temperature of around 50°C. The hybrid system studied can be considered as an alternative to photovoltaic/thermal systems, especially in countries with abundant solar radiation, such as Mexico, China, and India.

  3. Hybrid Perovskites for Photovoltaics: Charge-Carrier Recombination, Diffusion, and Radiative Efficiencies.

    Science.gov (United States)

    Johnston, Michael B; Herz, Laura M

    2016-01-19

    values extracted from OPTP measurements and their dependence on perovskite composition and morphology. The significance of the reviewed charge-carrier recombination and mobility parameters is subsequently evaluated in terms of the charge-carrier diffusion lengths and radiative efficiencies that may be obtained for such hybrid perovskites. We particularly focus on calculating such quantities in the limit of ultra-low trap-related recombination, which has not yet been demonstrated but could be reached through further advances in material processing. We find that for thin films of hybrid lead iodide perovskites with typical charge-carrier mobilities of ∼30cm(2)/(V s), charge-carrier diffusion lengths at solar (AM1.5) irradiation are unlikely to exceed ∼10 μm even if all trap-related recombination is eliminated. We further examine the radiative efficiency for hybrid lead halide perovskite films and show that if high efficiencies are to be obtained for intermediate charge-carrier densities (n ≈ 10(14) cm(-3)) trap-related recombination lifetimes will have to be enhanced well into the microsecond range.

  4. Formation and transport of entropy structures in the magnetotail simulated with a 3-D global hybrid code

    Science.gov (United States)

    Lin, Y.; Wing, S.; Johnson, J. R.; Wang, X. Y.; Perez, J. D.; Cheng, L.

    2017-06-01

    Global structure and evolution of flux tube entropy S, integrated over closed field lines, associated with magnetic reconnection in the magnetotail are investigated using the AuburN Global hybrId codE in three dimensions (3-D), ANGIE3D. Flux tubes with decreased entropy, or "bubbles," are found to be generated due to the sudden change of flux tube topology and thus volume in reconnection. By tracking the propagation of the entropy-depleted flux tubes, the roles of the entropy structure in plasma transport to the inner magnetosphere is examined with a self-consistent global hybrid simulation for the first time. The value of S first decreases due to the shortening of flux tubes and then increases due to local ion heating as the bubbles are injected earthward by interchange-ballooning instability, finally oscillating around an equilibrium radial distance where S is nearly the same as the ambient value. The pressure remains anisotropic and not constant along the flux tubes during their propagation with a nonzero heat flux along the field line throughout the duration of the simulation. The correlation of these bubbles with earthward fast flows and specific entropy s is also studied.

  5. The UF family of reference hybrid phantoms for computational radiation dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Choonsik [Division of Cancer Epidemiology and Genetics, National Cancer Institute, National Institute of Health, Bethesda, MD 20852 (United States); Lodwick, Daniel; Hurtado, Jorge; Pafundi, Deanna [Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, FL 32611 (United States); Williams, Jonathan L [Department of Radiology, University of Florida, Gainesville, FL 32611 (United States); Bolch, Wesley E [Departments of Nuclear and Radiological and Biomedical Engineering, University of Florida, Gainesville, FL 32611 (United States)], E-mail: wbolch@ufl.edu

    2010-01-21

    Computational human phantoms are computer models used to obtain dose distributions within the human body exposed to internal or external radiation sources. In addition, they are increasingly used to develop detector efficiencies for in vivo whole-body counters. Two classes of computational human phantoms have been widely utilized for dosimetry calculation: stylized and voxel phantoms that describe human anatomy through mathematical surface equations and 3D voxel matrices, respectively. Stylized phantoms are flexible in that changes to organ position and shape are possible given avoidance of region overlap, while voxel phantoms are typically fixed to a given patient anatomy, yet can be proportionally scaled to match individuals of larger or smaller stature, but of equivalent organ anatomy. Voxel phantoms provide much better anatomical realism as compared to stylized phantoms which are intrinsically limited by mathematical surface equations. To address the drawbacks of these phantoms, hybrid phantoms based on non-uniform rational B-spline (NURBS) surfaces have been introduced wherein anthropomorphic flexibility and anatomic realism are both preserved. Researchers at the University of Florida have introduced a series of hybrid phantoms representing the ICRP Publication 89 reference newborn, 15 year, and adult male and female. In this study, six additional phantoms are added to the UF family of hybrid phantoms-those of the reference 1 year, 5 year and 10 year child. Head and torso CT images of patients whose ages were close to the targeted ages were obtained under approved protocols. Major organs and tissues were segmented from these images using an image processing software, 3D-DOCTOR(TM). NURBS and polygon mesh surfaces were then used to model individual organs and tissues after importing the segmented organ models to the 3D NURBS modeling software, Rhinoceros(TM). The phantoms were matched to four reference datasets: (1) standard anthropometric data, (2) reference

  6. A hybrid numerical prediction scheme for solar radiation estimation in un-gauged catchments.

    Science.gov (United States)

    Shamim, M. A.; Bray, M.; Ishak, A. M.; Remesan, R.; Han, D.

    2009-09-01

    The importance of solar radiation on earth's surface is depicted in its wide range of applications in the fields of meteorology, agricultural sciences, engineering, hydrology, crop water requirements, climatic changes and energy assessment. It is quite random in nature as it has to go through different processes of assimilation and dispersion while on its way to earth. Compared to other meteorological parameters, solar radiation is quite infrequently measured, for example, the worldwide ratio of stations collecting solar radiation to those collecting temperature is 1:500 (Badescu, 2008). Researchers, therefore, have to rely on indirect techniques of estimation that include nonlinear models, artificial intelligence (e.g. neural networks), remote sensing and numerical weather predictions (NWP). This study proposes a hybrid numerical prediction scheme for solar radiation estimation in un-gauged catchments. It uses the PSU/NCAR's Mesoscale Modelling system (MM5) (Grell et al., 1995) to parameterise the cloud effect on extraterrestrial radiation by dividing the atmosphere into four layers of very high (6-12 km), high (3-6 km), medium (1.5-3) and low (0-1.5) altitudes from earth. It is believed that various cloud forms exist within each of these layers. An hourly time series of upper air pressure and relative humidity data sets corresponding to all of these layers is determined for the Brue catchment, southwest UK, using MM5. Cloud Index (CI) was then determined using (Yang and Koike, 2002): 1 p?bi [ (Rh - Rh )] ci =------- max 0.0,---------cri dp pbi - ptipti (1- Rhcri) where, pbi and pti represent the air pressure at the top and bottom of each layer and Rhcri is the critical value of relative humidity at which a certain cloud type is formed. Output from a global clear sky solar radiation model (MRM v-5) (Kambezidis and Psiloglu, 2008) is used along with meteorological datasets of temperature and precipitation and astronomical information. The analysis is aided by the

  7. GENII (Generation II): The Hanford Environmental Radiation Dosimetry Software System: Volume 3, Code maintenance manual: Hanford Environmental Dosimetry Upgrade Project

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-09-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). This coupled system of computer codes is intended for analysis of environmental contamination resulting from acute or chronic releases to, or initial contamination of, air, water, or soil, on through the calculation of radiation doses to individuals or populations. GENII is described in three volumes of documentation. This volume is a Code Maintenance Manual for the serious user, including code logic diagrams, global dictionary, worksheets to assist with hand calculations, and listings of the code and its associated data libraries. The first volume describes the theoretical considerations of the system. The second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. 7 figs., 5 tabs.

  8. An improved method for producing radiation hybrids applied to human chromosome 19. Technical progress report, March 1, 1991--February 28, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, C.L.

    1992-04-01

    At the initiation of the grant we had just produced radiation hybrids from a monochromosomal microcell hybrid containing human chromosome 19 as its only human component. Radiation hybrids were produced using doses of radiation ranging from 1000--8000 rads. Lethally irradiated cells were then fused to hamster recipients (CHTG49) and selected for growth in histidinol. Approximately 240 clones were isolated and 75 clones were expanded for the isolation of DNA. This report describes in situ hybridization studies and the introduction of markers into human chromosome 19.

  9. Hybrid parallelization of the XTOR-2F code for the simulation of two-fluid MHD instabilities in tokamaks

    Science.gov (United States)

    Marx, Alain; Lütjens, Hinrich

    2017-03-01

    A hybrid MPI/OpenMP parallel version of the XTOR-2F code [Lütjens and Luciani, J. Comput. Phys. 229 (2010) 8130] solving the two-fluid MHD equations in full tokamak geometry by means of an iterative Newton-Krylov matrix-free method has been developed. The present work shows that the code has been parallelized significantly despite the numerical profile of the problem solved by XTOR-2F, i.e. a discretization with pseudo-spectral representations in all angular directions, the stiffness of the two-fluid stability problem in tokamaks, and the use of a direct LU decomposition to invert the physical pre-conditioner at every Krylov iteration of the solver. The execution time of the parallelized version is an order of magnitude smaller than the sequential one for low resolution cases, with an increasing speedup when the discretization mesh is refined. Moreover, it allows to perform simulations with higher resolutions, previously forbidden because of memory limitations.

  10. Coherent Synchrotron Radiation A Simulation Code Based on the Non-Linear Extension of the Operator Splitting Method

    CERN Document Server

    Dattoli, Giuseppe

    2005-01-01

    The coherent synchrotron radiation (CSR) is one of the main problems limiting the performance of high intensity electron accelerators. A code devoted to the analysis of this type of problems should be fast and reliable: conditions that are usually hardly achieved at the same time. In the past, codes based on Lie algebraic techniques have been very efficient to treat transport problem in accelerators. The extension of these method to the non-linear case is ideally suited to treat CSR instability problems. We report on the development of a numerical code, based on the solution of the Vlasov equation, with the inclusion of non-linear contribution due to wake field effects. The proposed solution method exploits an algebraic technique, using exponential operators implemented numerically in C++. We show that the integration procedure is capable of reproducing the onset of an instability and effects associated with bunching mechanisms leading to the growth of the instability itself. In addition, parametric studies a...

  11. A fast, exact code for scattered thermal radiation compared with a two-stream approximation. [radiative transfer model

    Science.gov (United States)

    Cogley, A. C.; Pandey, D. K.; Bergstrom, R. W.

    1980-01-01

    A two-stream accuracy study for internally (thermal) driven problems is presented by comparison with a recently developed 'exact' adding/doubling method. The resulting errors in external (or boundary) radiative intensity and flux are usually larger than those for the externally driven problems and vary substantially with the radiative parameters. Error predictions for a specific problem are difficult. An unexpected result is that the exact method is computationally as fast as the two-stream approximation for nonisothermal media.

  12. Density convection near radiating ICRF antennas and its effect on the coupling of lower hybrid waves

    Energy Technology Data Exchange (ETDEWEB)

    Ekedahl, A.; Colas, L.; Beaumont, B.; Bibet, Ph.; Bremond, S.; Kazarian, F. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Mayoral, M.L.; Mailloux, J. [Euratom/UKAEA Fusion Association, Culham Science Centre, Abingdon, OX (United Kingdom); Noterdaeme, J.M. [Max-Planck-Institut fuer Plasmaphysik, Euratom Association, Garching (Germany)]|[Gent University, EESA Dept. (Belgium); Tuccillo, A.A. [Associazione Euratom-ENEA sulla Fusione, CR Frascati, Rome (Italy)

    2003-07-01

    Combined operation of lower hybrid (LH) and Ion Cyclotron Resonance Frequency (ICRF) waves can result in a degradation of the LH wave coupling, as observed both in the Tore-Supra and Jet tokamaks. The reflection coefficient on the part of the LH launcher magnetically connected to the powered ICRF antenna increases, suggesting a local decrease in the electron density in the connecting flux tubes. This has been confirmed by Langmuir probe measurements on the LH launchers in the latest Tore-Supra experiments. Moreover, recent experiments in Jet indicate that the LH coupling degradation depends on the ICRF power and its launched k{sub /} spectrum. The 2D density distribution around the Tore-Supra ICRF antennas has been modelled with the CELLS-code, balancing parallel losses with diffusive transport and sheath induced ExB convection, obtained from RF field mapping using the ICANT-code. The calculations are in qualitative agreement with the experimental observations, i.e. density depletion is obtained, localised mainly in the antenna shadow, and dependent on ICRF power and antenna spectrum. (authors)

  13. Nanogold-based bio-bar codes for label-free immunosensing of proteins coupling with an in situ DNA-based hybridization chain reaction.

    Science.gov (United States)

    Zhou, Jun; Xu, Mingdi; Tang, Dianping; Gao, Zhuangqiang; Tang, Juan; Chen, Guonan

    2012-12-28

    A label-free, non-enzyme immunosensing strategy is designed for ultrasensitive electronic detection of disease-related proteins (carcinoembryonic antigen as a model) by using gold nanoparticle-based bio-bar codes and an in situ amplified DNA-based hybridization chain reaction.

  14. RRTMGP: A High-Performance Broadband Radiation Code for the Next Decade

    Science.gov (United States)

    2015-09-30

    the PI of this project, and his team at AER includes programmers with experience coding for modern computer architectures, including the recent GPU ...Supercomputer Center (CSCS) in Lugano will be developing a GPU version (OpenACC) of this code for use in the ICON LES model. This version will provide a...significant foundation for the GPU version of our code that is a deliverable for this project. Andre Wehe of AER will spend the first week in November

  15. Nanostructure of PDMS-TEOS-PrZr hybrids prepared by direct deposition of gamma radiation energy

    Science.gov (United States)

    Lancastre, Joana J. H.; Falcão, António N.; Margaça, Fernanda M. A.; Ferreira, Luís M.; Miranda Salvado, Isabel M.; Almásy, László; Casimiro, Maria H.; Meiszterics, Anikó

    2015-10-01

    Organic-inorganic materials have been the object of intense research due to their wide range of properties and therefore innumerous applications. We prepared organic-inorganic hybrid materials by direct energy deposition on a mixture of polydimethylsiloxane silanol terminated (33 wt% fixed content), tetraethylorthosilicate and a minor content of zirconium propoxide that varied from 1 to 5 wt% using gamma radiation from a Co-60 source. The samples, dried in air at room temperature, are bulk, flexible and transparent. Their nanostructure was investigated by small angle neutron scattering. It was found that the inorganic oxide network has fractal structure, which becomes denser as the zirconium propoxide content decreases. The results suggest that oxide nanosized regions grow from the OH terminal group of PDMS which are the condensation seeds. Their number and position remains unaltered with the variation of zirconium propoxide content that only affects their microstructure. A model is proposed for the nanostructure of the oxide network that develops in the irradiation processed hybrid materials.

  16. A new hybrid method--combined heat flux method with Monte-Carlo method to analyze thermal radiation

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new hybrid method, Monte-Carlo-Heat-Flux (MCHF) method, was presented to analyze the radiative heat transfer of participating medium in a three-dimensional rectangular enclosure using combined the Monte-Carlo method with the heat flux method. Its accuracy and reliability was proved by comparing the computational results with exact results from classical "Zone Method".

  17. Up-regulation of BRAF activated non-coding RNA is associated with radiation therapy for lung cancer.

    Science.gov (United States)

    Chen, Jian-xiang; Chen, Ming; Zheng, Yuan-da; Wang, Sheng-ye; Shen, Zhu-ping

    2015-04-01

    Radiation therapy has become more effective in treating primary tumors, such as lung cancer. Recent evidence suggested that BRAF activated non-coding RNAs (BANCR) play a critical role in cellular processes and are found to be dysregulated in a variety of cancers. The clinical significance of BANCR in radiation therapy, and its molecular mechanisms controlling tumor growth are unclear. In the present study, C57BL/6 mice were inoculated Lewis lung cancer cells and exposed to radiation therapy, then BANCR expression was analyzed using qPCR. Chromatin immunoprecipitation and western blot were performed to calculate the enrichment of histone acetylation and HDAC3 protein levels in Lewis lung cancer cells, respectively. MTT assay was used to evaluate the effects of BANCR on Lewis lung cancer cell viability. Finally, we found that BANCR expression was significantly increased in C57BL/6 mice receiving radiation therapy (Pcancer cells. Histone deacetylation was observed to involve in the regulation of BANCR in Lewis lung cancer cells. Moreover, over expression HDAC3 reversed the effect of rays on BANCR expression. MTT assay showed that knockdown of BANCR expression promoted cell viability surviving from radiation. In conclusion, these findings indicated that radiation therapy was an effective treatment for lung cancer, and it may exert function through up-regulation BANCR expression.

  18. Effects of Vacuum Ultraviolet Radiation on Atomic Oxygen Erosion of Polysiloxane/SiO2 Hybrid Coatings

    Institute of Scientific and Technical Information of China (English)

    Longfei Hu; Meishuan Li; Yanchun Zhou

    2009-01-01

    Polysiloxane/SiO2 hybrid coatings have been prepared on Kapton films by a sol-gel process. The erosion resistance of polysiloxane/SiO2 (20 wt pct) coating was evaluated by exposure tests of vacuum ultraviolet radiation (VUV) and atomic oxygen beam (AO) in a ground-based simulation facility. The experimental results indicate that this coating exhibits better AO resistance than pure polysiloxane coating. The erosion yield (Ey) of the polysiloxane/SiO2 (20 wt pct) hybrid coating is about 10-27 cm3/atom, being one or two orders of magnitude lower than that of polysiloxane. VUV radiation can affect the erosion process greatly. Under simultaneous AO and VUV exposure, the value of Ey of the polysiloxane/SiO2 (20 wt pct) hybrid coating increases by 39% compared with that under single AO exposure.

  19. An implementation of hybrid parallel CUDA code for the hyperonic nuclear forces

    CERN Document Server

    Nemura, Hidekatsu

    2016-01-01

    We present our recent effort to develop a GPGPU program to calculate 52 channels of the Nambu-Bethe-Salpeter (NBS) wave functions in order to study the baryon interactions, from nucleon-nucleon to $\\Xi-\\Xi$, from lattice QCD. We adopt CUDA programming to perform the multi-GPU execution on a hybrid parallel programming with MPI and OpenMP. Effective baryon block algorithm is briefly outlined, which calculates efficaciously a large number of NBS wave functions at a time, and three CUDA kernel programs are implemented to materialize the effective baryon block algorithm using GPUs on the single-program multiple-data (SPMD) programming model. In order to parallelize multiple GPUs, we take both two approaches by dividing the time dimension and by dividing the spatial dimensions. Performances are measured using HA-PACS supercomputer in University of Tsukuba, which includes NVIDIA M2090 and NVIDIA K20X GPUs. Strong scaling and weak scaling measured by using both M2090 and K20X GPUs are presented. We find distinct dif...

  20. Combining node-centered parallel radiation transport and higher-order multi-material cell-centered hydrodynamics methods in three-temperature radiation hydrodynamics code TRHD

    Science.gov (United States)

    Sijoy, C. D.; Chaturvedi, S.

    2016-06-01

    Higher-order cell-centered multi-material hydrodynamics (HD) and parallel node-centered radiation transport (RT) schemes are combined self-consistently in three-temperature (3T) radiation hydrodynamics (RHD) code TRHD (Sijoy and Chaturvedi, 2015) developed for the simulation of intense thermal radiation or high-power laser driven RHD. For RT, a node-centered gray model implemented in a popular RHD code MULTI2D (Ramis et al., 2009) is used. This scheme, in principle, can handle RT in both optically thick and thin materials. The RT module has been parallelized using message passing interface (MPI) for parallel computation. Presently, for multi-material HD, we have used a simple and robust closure model in which common strain rates to all materials in a mixed cell is assumed. The closure model has been further generalized to allow different temperatures for the electrons and ions. In addition to this, electron and radiation temperatures are assumed to be in non-equilibrium. Therefore, the thermal relaxation between the electrons and ions and the coupling between the radiation and matter energies are required to be computed self-consistently. This has been achieved by using a node-centered symmetric-semi-implicit (SSI) integration scheme. The electron thermal conduction is calculated using a cell-centered, monotonic, non-linear finite volume scheme (NLFV) suitable for unstructured meshes. In this paper, we have described the details of the 2D, 3T, non-equilibrium, multi-material RHD code developed with a special attention to the coupling of various cell-centered and node-centered formulations along with a suite of validation test problems to demonstrate the accuracy and performance of the algorithms. We also report the parallel performance of RT module. Finally, in order to demonstrate the full capability of the code implementation, we have presented the simulation of laser driven shock propagation in a layered thin foil. The simulation results are found to be in good

  1. A Hybrid Solvers Enhanced Integral Equation Domain Decomposition Method for Modeling of Electromagnetic Radiation

    Directory of Open Access Journals (Sweden)

    Ran Zhao

    2015-01-01

    Full Text Available The hybrid solvers based on integral equation domain decomposition method (HS-DDM are developed for modeling of electromagnetic radiation. Based on the philosophy of “divide and conquer,” the IE-DDM divides the original multiscale problem into many closed nonoverlapping subdomains. For adjacent subdomains, the Robin transmission conditions ensure the continuity of currents, so the meshes of different subdomains can be allowed to be nonconformal. It also allows different fast solvers to be used in different subdomains based on the property of different subdomains to reduce the time and memory consumption. Here, the multilevel fast multipole algorithm (MLFMA and hierarchical (H- matrices method are combined in the framework of IE-DDM to enhance the capability of IE-DDM and realize efficient solution of multiscale electromagnetic radiating problems. The MLFMA is used to capture propagating wave physics in large, smooth regions, while H-matrices are used to capture evanescent wave physics in small regions which are discretized with dense meshes. Numerical results demonstrate the validity of the HS-DDM.

  2. Hybrid Adaptive Ray-Moment Method (HARM2): A highly parallel method for radiation hydrodynamics on adaptive grids

    Science.gov (United States)

    Rosen, A. L.; Krumholz, M. R.; Oishi, J. S.; Lee, A. T.; Klein, R. I.

    2017-02-01

    We present a highly-parallel multi-frequency hybrid radiation hydrodynamics algorithm that combines a spatially-adaptive long characteristics method for the radiation field from point sources with a moment method that handles the diffuse radiation field produced by a volume-filling fluid. Our Hybrid Adaptive Ray-Moment Method (HARM2) operates on patch-based adaptive grids, is compatible with asynchronous time stepping, and works with any moment method. In comparison to previous long characteristics methods, we have greatly improved the parallel performance of the adaptive long-characteristics method by developing a new completely asynchronous and non-blocking communication algorithm. As a result of this improvement, our implementation achieves near-perfect scaling up to O (103) processors on distributed memory machines. We present a series of tests to demonstrate the accuracy and performance of the method.

  3. Hybrid Adaptive Ray-Moment Method (HARM$^2$): A Highly Parallel Method for Radiation Hydrodynamics on Adaptive Grids

    CERN Document Server

    Rosen, Anna L; Oishi, Jeffrey S; Lee, Aaron T; Klein, Richard I

    2016-01-01

    We present a highly-parallel multi-frequency hybrid radiation hydrodynamics algorithm that combines a spatially-adaptive long characteristics method for the radiation field from point sources with a moment method that handles the diffuse radiation field produced by a volume-filling fluid. Our Hybrid Adaptive Ray-Moment Method (HARM$^2$) operates on patch-based adaptive grids, is compatible with asynchronous time stepping, and works with any moment method. In comparison to previous long characteristics methods, we have greatly improved the parallel performance of the adaptive long-characteristics method by developing a new completely asynchronous and non-blocking communication algorithm. As a result of this improvement, our implementation achieves near-perfect scaling up to $\\mathcal{O}(10^3)$ processors on distributed memory machines. We present a series of tests to demonstrate the accuracy and performance of the method.

  4. A NEW SEMI-EMPIRICAL AMBIENT TO EFFECTIVE DOSE CONVERSION MODEL FOR THE PREDICTIVE CODE FOR AIRCREW RADIATION EXPOSURE (PCAIRE).

    Science.gov (United States)

    Dumouchel, T; McCall, M; Lemay, F; Bennett, L; Lewis, B; Bean, M

    2016-12-01

    The Predictive Code for Aircrew Radiation Exposure (PCAIRE) is a semi-empirical code that estimates both ambient dose equivalent, based on years of on-board measurements, and effective dose to aircrew. Currently, PCAIRE estimates effective dose by converting the ambient dose equivalent to effective dose (E/H) using a model that is based on radiation transport calculations and on the radiation weighting factors recommended in International Commission on Radiological Protection (ICRP) 60. In this study, a new semi-empirical E/H model is proposed to replace the existing transport calculation models. The new model is based on flight data measured using a tissue-equivalent proportional counter (TEPC). The measured flight TEPC data are separated into a low- and a high-lineal-energy spectrum using an amplitude-weighted (137)Cs TEPC spectrum. The high-lineal-energy spectrum is determined by subtracting the low-lineal-energy spectrum from the measured flight TEPC spectrum. With knowledge of E/H for the low- and high-lineal-energy spectra, the total E/H is estimated for a given flight altitude and geographic location. The semi-empirical E/H model also uses new radiation weighting factors to align the model with the most recent ICRP 103 recommendations. The ICRP 103-based semi-empirical effective dose model predicts that there is a ∼30 % reduction in dose in comparison with the ICRP 60-based model. Furthermore, the ambient dose equivalent is now a more conservative dose estimate for jet aircraft altitudes in the range of 7-13 km (FL230-430). This new semi-empirical E/H model is validated against E/H predicted from a Monte Carlo N-Particle transport code simulation of cosmic ray propagation through the Earth's atmosphere. Its implementation allows PCAIRE to provide an accurate semi-empirical estimate of the effective dose.

  5. A Radiation-Hydrodynamics Code Comparison for Laser-Produced Plasmas: FLASH versus HYDRA and the Results of Validation Experiments

    CERN Document Server

    Orban, Chris; Chawla, Sugreev; Wilks, Scott C; Lamb, Donald Q

    2013-01-01

    The potential for laser-produced plasmas to yield fundamental insights into high energy density physics (HEDP) and deliver other useful applications can sometimes be frustrated by uncertainties in modeling the properties and expansion of these plasmas using radiation-hydrodynamics codes. In an effort to overcome this and to corroborate the accuracy of the HEDP capabilities recently added to the publicly available FLASH radiation-hydrodynamics code, we present detailed comparisons of FLASH results to new and previously published results from the HYDRA code used extensively at Lawrence Livermore National Laboratory. We focus on two very different problems of interest: (1) an Aluminum slab irradiated by 15.3 and 76.7 mJ of "pre-pulse" laser energy and (2) a mm-long triangular groove cut in an Aluminum target irradiated by a rectangular laser beam. Because this latter problem bears a resemblance to astrophysical jets, Grava et al., Phys. Rev. E, 78, (2008) performed this experiment and compared detailed x-ray int...

  6. GARLIC - A general purpose atmospheric radiative transfer line-by-line infrared-microwave code: Implementation and evaluation

    Science.gov (United States)

    Schreier, Franz; Gimeno García, Sebastián; Hedelt, Pascal; Hess, Michael; Mendrok, Jana; Vasquez, Mayte; Xu, Jian

    2014-04-01

    A suite of programs for high resolution infrared-microwave atmospheric radiative transfer modeling has been developed with emphasis on efficient and reliable numerical algorithms and a modular approach appropriate for simulation and/or retrieval in a variety of applications. The Generic Atmospheric Radiation Line-by-line Infrared Code - GARLIC - is suitable for arbitrary observation geometry, instrumental field-of-view, and line shape. The core of GARLIC's subroutines constitutes the basis of forward models used to implement inversion codes to retrieve atmospheric state parameters from limb and nadir sounding instruments. This paper briefly introduces the physical and mathematical basics of GARLIC and its descendants and continues with an in-depth presentation of various implementation aspects: An optimized Voigt function algorithm combined with a two-grid approach is used to accelerate the line-by-line modeling of molecular cross sections; various quadrature methods are implemented to evaluate the Schwarzschild and Beer integrals; and Jacobians, i.e. derivatives with respect to the unknowns of the atmospheric inverse problem, are implemented by means of automatic differentiation. For an assessment of GARLIC's performance, a comparison of the quadrature methods for solution of the path integral is provided. Verification and validation are demonstrated using intercomparisons with other line-by-line codes and comparisons of synthetic spectra with spectra observed on Earth and from Venus.

  7. HELIOS: An Open-source, GPU-accelerated Radiative Transfer Code for Self-consistent Exoplanetary Atmospheres

    Science.gov (United States)

    Malik, Matej; Grosheintz, Luc; Mendonça, João M.; Grimm, Simon L.; Lavie, Baptiste; Kitzmann, Daniel; Tsai, Shang-Min; Burrows, Adam; Kreidberg, Laura; Bedell, Megan; Bean, Jacob L.; Stevenson, Kevin B.; Heng, Kevin

    2017-02-01

    We present the open-source radiative transfer code named HELIOS, which is constructed for studying exoplanetary atmospheres. In its initial version, the model atmospheres of HELIOS are one-dimensional and plane-parallel, and the equation of radiative transfer is solved in the two-stream approximation with nonisotropic scattering. A small set of the main infrared absorbers is employed, computed with the opacity calculator HELIOS-K and combined using a correlated-k approximation. The molecular abundances originate from validated analytical formulae for equilibrium chemistry. We compare HELIOS with the work of Miller-Ricci & Fortney using a model of GJ 1214b, and perform several tests, where we find: model atmospheres with single-temperature layers struggle to converge to radiative equilibrium; k-distribution tables constructed with ≳ 0.01 cm-1 resolution in the opacity function (≲ {10}3 points per wavenumber bin) may result in errors ≳ 1%-10% in the synthetic spectra; and a diffusivity factor of 2 approximates well the exact radiative transfer solution in the limit of pure absorption. We construct “null-hypothesis” models (chemical equilibrium, radiative equilibrium, and solar elemental abundances) for six hot Jupiters. We find that the dayside emission spectra of HD 189733b and WASP-43b are consistent with the null hypothesis, while the latter consistently underpredicts the observed fluxes of WASP-8b, WASP-12b, WASP-14b, and WASP-33b. We demonstrate that our results are somewhat insensitive to the choice of stellar models (blackbody, Kurucz, or PHOENIX) and metallicity, but are strongly affected by higher carbon-to-oxygen ratios. The code is publicly available as part of the Exoclimes Simulation Platform (exoclime.net).

  8. A fast Monte Carlo code for proton transport in radiation therapy based on MCNPX.

    Science.gov (United States)

    Jabbari, Keyvan; Seuntjens, Jan

    2014-07-01

    An important requirement for proton therapy is a software for dose calculation. Monte Carlo is the most accurate method for dose calculation, but it is very slow. In this work, a method is developed to improve the speed of dose calculation. The method is based on pre-generated tracks for particle transport. The MCNPX code has been used for generation of tracks. A set of data including the track of the particle was produced in each particular material (water, air, lung tissue, bone, and soft tissue). This code can transport protons in wide range of energies (up to 200 MeV for proton). The validity of the fast Monte Carlo (MC) code is evaluated with data MCNPX as a reference code. While analytical pencil beam algorithm transport shows great errors (up to 10%) near small high density heterogeneities, there was less than 2% deviation of MCNPX results in our dose calculation and isodose distribution. In terms of speed, the code runs 200 times faster than MCNPX. In the Fast MC code which is developed in this work, it takes the system less than 2 minutes to calculate dose for 10(6) particles in an Intel Core 2 Duo 2.66 GHZ desktop computer.

  9. A fast Monte Carlo code for proton transport in radiation therapy based on MCNPX

    Directory of Open Access Journals (Sweden)

    Keyvan Jabbari

    2014-01-01

    Full Text Available An important requirement for proton therapy is a software for dose calculation. Monte Carlo is the most accurate method for dose calculation, but it is very slow. In this work, a method is developed to improve the speed of dose calculation. The method is based on pre-generated tracks for particle transport. The MCNPX code has been used for generation of tracks. A set of data including the track of the particle was produced in each particular material (water, air, lung tissue, bone, and soft tissue. This code can transport protons in wide range of energies (up to 200 MeV for proton. The validity of the fast Monte Carlo (MC code is evaluated with data MCNPX as a reference code. While analytical pencil beam algorithm transport shows great errors (up to 10% near small high density heterogeneities, there was less than 2% deviation of MCNPX results in our dose calculation and isodose distribution. In terms of speed, the code runs 200 times faster than MCNPX. In the Fast MC code which is developed in this work, it takes the system less than 2 minutes to calculate dose for 10 6 particles in an Intel Core 2 Duo 2.66 GHZ desktop computer.

  10. On the performance of hybrid-ARQ with incremental redundancy and with code combining over relay channels

    KAUST Repository

    Chelli, Ali

    2013-08-01

    In this paper, we consider a relay network consisting of a source, a relay, and a destination. The source transmits a message to the destination using hybrid automatic repeat request (HARQ). The relay overhears the transmitted messages over the different HARQ rounds and tries to decode the data packet. In case of successful decoding at the relay, both the relay and the source cooperate to transmit the message to the destination. The channel realizations are independent for different HARQ rounds. We assume that the transmitter has no channel state information (CSI). Under such conditions, power and rate adaptation are not possible. To overcome this problem, HARQ allows the implicit adaptation of the transmission rate to the channel conditions by the use of feedback. There are two major HARQ techniques, namely HARQ with incremental redundancy (IR) and HARQ with code combining (CC). We investigate the performance of HARQ-IR and HARQ-CC over a relay channel from an information theoretic perspective. Analytical expressions are derived for the information outage probability, the average number of transmissions, and the average transmission rate. We illustrate through our investigation the benefit of relaying. We also compare the performance of HARQ-IR and HARQ-CC and show that HARQ-IR outperforms HARQ-CC. © 2013 IEEE.

  11. A New Radiation Hydrodynamics Code and Application to the Calculation of Type Ia Supernovae Light Curves and Continuum Spectra

    CERN Document Server

    Zhang, X; Zhang, Xiao-he; Sutherland, Peter

    1993-01-01

    A new, fully dynamic and self-consistent radiation hydrodynamics code, suitable for the calculation of supernovae light curves and continuum spectra, is described. It is a multigroup (frequency-dependent) code and includes all important $O(v/c)$ effects. It is applied to the model W7 of Nomoto, Thielemann, \\& Yokoi (1984) for supernovae of type Ia. Radioactive energy deposition is incorporated through use of tables based upon Monte Carlo results. Effects of line opacity (both static or line blanketing and expansion or line blocking) are neglected, although these may prove to be important. At maximum light, models based upon different treatments of the opacity lead to values for $M_{B,max}$ in the range of -19.0 to -19.4. This range falls between the values for observed supernova claimed by Leibundgut \\& Tammann (1990) and by Pierce, Ressler, \\& Shure (1992).

  12. Multiwalled carbon nanotubes and dispersed nanodiamond novel hybrids: Microscopic structure evolution, physical properties, and radiation resilience

    Science.gov (United States)

    Gupta, S.; Farmer, J.

    2011-01-01

    We report the structure and physical properties of novel hybrids of multiwalled carbon nanotubes (MWCNTs) and ultradispersed diamond (UDD) forming nanocomposite ensemble that were subjected to 50, 100, and 103 kGy gamma ray doses and characterized using various analytical tools to investigate hierarchical defects evolution. This work is prompted by recent work on single-walled CNTs and UDD ensemble [Gupta et al., J. Appl. Phys. 107, 104308 (2010)] where radiation-induced microscopic defects seem to be stabilized by UDD. The present experiments show similar effects where these hybrids display only a minimal structural modification under the maximum dose. Quantitative analyses of multiwavelength Raman spectra revealed lattice defects induced by irradiation assessed through the variation in prominent D, G, and 2D bands. A minimal change in the position of D, G, and 2D bands and a marginal increase in intensity of the defect-induced double resonant Raman scattered D and 2D bands are some of the implications suggesting the radiation coupling. The in-plane correlation length (La) was also determined following Tunistra-Koenig relation from the ratio of D to G band (ID/IG) besides microscopic stress. However, we also suggest the following taking into account of intrinsic defects of the constituents: (a) charge transfer arising at the interface due to the difference in electronegativity of MWCNT C sp2 and UDD core (C sp3) leading to phonon and electron energy renormalization; (b) misorientation of C sp2 at the interface of MWCNT and UDD shell (C sp2) resulting in structural disorder; (c) softening or violation of the q ˜0 selection rule leading to D band broadening and a minimal change in G band intensity; and (d) normalized intensity of D and G bands with 2D band help to distinguish defect-induced double resonance phenomena. The MWCNT when combined with nanodiamond showed a slight decrease in their conductance further affected by irradiation pointing at relatively good

  13. A Monte Carlo transport code study of the space radiation environment using FLUKA and ROOT

    CERN Document Server

    Wilson, T; Carminati, F; Brun, R; Ferrari, A; Sala, P; Empl, A; MacGibbon, J

    2001-01-01

    We report on the progress of a current study aimed at developing a state-of-the-art Monte-Carlo computer simulation of the space radiation environment using advanced computer software techniques recently available at CERN, the European Laboratory for Particle Physics in Geneva, Switzerland. By taking the next-generation computer software appearing at CERN and adapting it to known problems in the implementation of space exploration strategies, this research is identifying changes necessary to bring these two advanced technologies together. The radiation transport tool being developed is tailored to the problem of taking measured space radiation fluxes impinging on the geometry of any particular spacecraft or planetary habitat and simulating the evolution of that flux through an accurate model of the spacecraft material. The simulation uses the latest known results in low-energy and high-energy physics. The output is a prediction of the detailed nature of the radiation environment experienced in space as well a...

  14. A multigroup diffusion solver using pseudo transient continuation for a radiation-hydrodynamic code with patch-based AMR

    CERN Document Server

    Shestakov, A I

    2007-01-01

    We present a scheme to solve the nonlinear multigroup radiation diffusion (MGD) equations. The method is incorporated into a massively parallel, multidimensional, Eulerian radiation-hydrodynamic code with adaptive mesh refinement (AMR). The patch-based AMR algorithm refines in both space and time creating a hierarchy of levels, coarsest to finest. The physics modules are time-advanced using operator splitting. On each level, separate level-solve packages advance the modules. Our multigroup level-solve adapts an implicit procedure which leads to a two-step iterative scheme that alternates between elliptic solves for each group with intra-cell group coupling. For robustness, we introduce pseudo transient continuation (PTC). We analyze the magnitude of the PTC parameter to ensure positivity of the resulting linear system, diagonal dominance and convergence of the two-step scheme. For AMR, a level defines a subdomain for refinement. For diffusive processes such as MGD, the refined level uses Dirichet boundary dat...

  15. Drying Strategy of Shrimp using Hot Air Convection and Hybrid Infrared Radiation/Hot Air Convection

    Directory of Open Access Journals (Sweden)

    Supawan TIRAWANICHAKUL

    2008-01-01

    Full Text Available The main objective of the research was to study the effect of drying temperatures using infrared irradiation and electric heating convection on dehydration and was to investigate the effect of drying conditions on the quality of the shrimp. Two sizes of fresh shrimp (100 shrimp/kg and 200 shrimp/kg with initial moisture content of 270 - 350 % dry-basis were dried under various conditions while the final moisture content of dried shrimp was in ranges between 20 and 25 % dry-basis. Hot air flow rates of 1.0 -   1.2 m/s, drying temperatures of 40 - 90 °C and infrared intensities of 1,785.7 - 3,571.4 W/m2 were used in these experiments. The experimental results showed that the rate of moisture content transfer of both sizes of shrimps decreased exponentially with drying time while increasing drying temperature significantly affected to the drying kinetics and quality of the shrimps. Effective diffusion coefficients of both shrimps were determined by a diffusion model forming a finite cylindrical shape was in order of 10-7 m2/s and this effective diffusion coefficient value was relatively dependent on the drying temperature compared to the initial moisture content. The quality analysis of dried shrimp using an infrared source and electric heating source found that the redness value (Hunter a-value of dried samples using hybrid infrared radiation and electric heating had a higher colour uniformity than other drying methods. Additionally, shrinkage and rehydration properties were insignificantly different for all drying strategies (p < 0.05 and drying using infrared radiation had higher drying rates compared to electric heat convection, corresponding to relatively low drying times.

  16. HELIOS: An Open-Source, GPU-Accelerated Radiative Transfer Code For Self-Consistent Exoplanetary Atmospheres

    CERN Document Server

    Malik, Matej; Mendonça, João M; Grimm, Simon L; Lavie, Baptiste; Kitzmann, Daniel; Tsai, Shang-Min; Burrows, Adam; Kreidberg, Laura; Bedell, Megan; Bean, Jacob L; Stevenson, Kevin B; Heng, Kevin

    2016-01-01

    We present the open-source radiative transfer code named HELIOS, which is constructed for studying exoplanetary atmospheres. In its initial version, the model atmospheres of HELIOS are one-dimensional and plane-parallel, and the equation of radiative transfer is solved in the two-stream approximation with non-isotropic scattering. The opacities are computed with the opacity calculator HELIOS-K and converted to k-distribution tables by weighing the molecular abundances with analytical chemistry formulae. We validate HELIOS by comparing a model of GJ 1214b to that computed using COOLTLUSTY and from the work of Miller-Ricci & Fortney, and by performing several tests, where we find: model atmospheres with single-temperature layers struggle to converge to radiative equilibrium; k-distribution tables constructed with 1-10% in the synthetic spectra; and a diffusivity factor of 2 approximates well the exact radiative transfer solution in the limit of pure absorption. We construct "null-hypothesis" models (chemic...

  17. Analysis of coupled conduction and radiation heat transfer in presence of participating medium- using a hybrid method

    Energy Technology Data Exchange (ETDEWEB)

    Mahapatra, SK [University College of Engineering, Mechanical Eng. Dept., Burla, Orissa (India); Burla Engineering College Campus, Qrs No. 3R/32, Professor Colony, Orissa (India); Nanda, P [University College of Engineering, Mechanical Eng. Dept., Burla, Orissa (India); Sarkar, A [Jadavpur University, Mechanical Eng. Dept., Kolkata (India)

    2005-08-01

    The current study addresses the mathematical modeling aspects of coupled conductive and radiative heat transfer in presence of absorbing, emitting and isotropic scattering gray medium within two-dimensional square enclosure. The walls of the enclosure are considered to be opaque, diffuse and gray. The enclosure comprised of isothermal vertical walls and insulated horizontal walls. A new hybrid method where the concepts of modified differential approximation employed by blending discrete ordinate method and spherical harmonics method, has been developed for modeling the radiative transport equation. The finite volume method has been adopted as the numerical technique. The effect of various influencing parameters i.e., radiation-conduction parameter, surface emissivity, single scattering albedo and optical thickness has been illustrated. The compatibility of the method with regard to solving coupled conduction and radiation has also been addressed. (orig.)

  18. Radiation hybrid mapping of a cytokine gene cluster located in the proximal region of 5q

    Energy Technology Data Exchange (ETDEWEB)

    Segal, A.L.; McPherson, J.D.; Wasmuth, J.J. [Univ. of California, Irvine (United States)

    1994-09-01

    The long (q) arm of chromosome 5 has been shown to contain a large number of genes encoding growth factors, growth factor receptors, hormone receptors and neurotransmitter receptors. IL-3, IL-4, IL-5, IL-9, IL-13, GM-CSF and IRF-1 are located in the 5q22-31.1 interval, while three GABA receptors map to 5q33-34. A number of receptors, including the prolactin and growth hormone receptors, the IL-7 receptor and the leukemia inhibitory factor receptor, map to proximal 5p. Genes encoding three of the complement components, C6, C7 and C9, are also located in the same region. YAC data indicates that C6 and C7 lie within 170 kb of each other. We have used a panel of 180 Chinese hamster-human radiation hybrids possessing fragments of human chromosome 5 to construct a physical map of this region of 5q. Two-point and multi-point analyses were done on the data and significant LOD scores (from 3 to 30) were observed. LIFR, PRLR, GHR, IL-7R, C6, C7, C9, TARS, and a number of CEPH-Genethon dinucleotide repeat markers were ordered and mapped. Yeast artificial chromosomes and cosmids have been isolated and inter-Alu PCR products from them are being used to construct a contig and to improve the physical map. The long term goal of this work is to identify and characterize new genes in the region.

  19. Ultra high molecular weight polyethylene (UHMWPE) fiber epoxy composite hybridized with Gadolinium and Boron nanoparticles for radiation shielding

    Science.gov (United States)

    Mani, Venkat; Prasad, Narasimha S.; Kelkar, Ajit

    2016-09-01

    Deep space radiations pose a major threat to the astronauts and their spacecraft during long duration space exploration missions. The two sources of radiation that are of concern are the galactic cosmic radiation (GCR) and the short lived secondary neutron radiations that are generated as a result of fragmentation that occurs when GCR strikes target nuclei in a spacecraft. Energy loss, during the interaction of GCR and the shielding material, increases with the charge to mass ratio of the shielding material. Hydrogen with no neutron in its nucleus has the highest charge to mass ratio and is the element which is the most effective shield against GCR. Some of the polymers because of their higher hydrogen content also serve as radiation shield materials. Ultra High Molecular Weight Polyethylene (UHMWPE) fibers, apart from possessing radiation shielding properties by the virtue of the high hydrogen content, are known for extraordinary properties. An effective radiation shielding material is the one that will offer protection from GCR and impede the secondary neutron radiations resulting from the fragmentation process. Neutrons, which result from fragmentation, do not respond to the Coulombic interaction that shield against GCR. To prevent the deleterious effects of secondary neutrons, targets such as Gadolinium are required. In this paper, the radiation shielding studies that were carried out on the fabricated sandwich panels by vacuum-assisted resin transfer molding (VARTM) process are presented. VARTM is a manufacturing process used for making large composite structures by infusing resin into base materials formed with woven fabric or fiber using vacuum pressure. Using the VARTM process, the hybridization of Epoxy/UHMWPE composites with Gadolinium nanoparticles, Boron, and Boron carbide nanoparticles in the form of sandwich panels were successfully carried out. The preliminary results from neutron radiation tests show that greater than 99% shielding performance was

  20. Voxel2MCNP: a framework for modeling, simulation and evaluation of radiation transport scenarios for Monte Carlo codes.

    Science.gov (United States)

    Pölz, Stefan; Laubersheimer, Sven; Eberhardt, Jakob S; Harrendorf, Marco A; Keck, Thomas; Benzler, Andreas; Breustedt, Bastian

    2013-08-21

    The basic idea of Voxel2MCNP is to provide a framework supporting users in modeling radiation transport scenarios using voxel phantoms and other geometric models, generating corresponding input for the Monte Carlo code MCNPX, and evaluating simulation output. Applications at Karlsruhe Institute of Technology are primarily whole and partial body counter calibration and calculation of dose conversion coefficients. A new generic data model describing data related to radiation transport, including phantom and detector geometries and their properties, sources, tallies and materials, has been developed. It is modular and generally independent of the targeted Monte Carlo code. The data model has been implemented as an XML-based file format to facilitate data exchange, and integrated with Voxel2MCNP to provide a common interface for modeling, visualization, and evaluation of data. Also, extensions to allow compatibility with several file formats, such as ENSDF for nuclear structure properties and radioactive decay data, SimpleGeo for solid geometry modeling, ImageJ for voxel lattices, and MCNPX's MCTAL for simulation results have been added. The framework is presented and discussed in this paper and example workflows for body counter calibration and calculation of dose conversion coefficients is given to illustrate its application.

  1. Reactor Dosimetry Applications Using RAPTOR-M3G:. a New Parallel 3-D Radiation Transport Code

    Science.gov (United States)

    Longoni, Gianluca; Anderson, Stanwood L.

    2009-08-01

    The numerical solution of the Linearized Boltzmann Equation (LBE) via the Discrete Ordinates method (SN) requires extensive computational resources for large 3-D neutron and gamma transport applications due to the concurrent discretization of the angular, spatial, and energy domains. This paper will discuss the development RAPTOR-M3G (RApid Parallel Transport Of Radiation - Multiple 3D Geometries), a new 3-D parallel radiation transport code, and its application to the calculation of ex-vessel neutron dosimetry responses in the cavity of a commercial 2-loop Pressurized Water Reactor (PWR). RAPTOR-M3G is based domain decomposition algorithms, where the spatial and angular domains are allocated and processed on multi-processor computer architectures. As compared to traditional single-processor applications, this approach reduces the computational load as well as the memory requirement per processor, yielding an efficient solution methodology for large 3-D problems. Measured neutron dosimetry responses in the reactor cavity air gap will be compared to the RAPTOR-M3G predictions. This paper is organized as follows: Section 1 discusses the RAPTOR-M3G methodology; Section 2 describes the 2-loop PWR model and the numerical results obtained. Section 3 addresses the parallel performance of the code, and Section 4 concludes this paper with final remarks and future work.

  2. A radiation hybrid map of human chromosome 11q22-q23 containing the ataxia-telangiectasia disease locus

    Energy Technology Data Exchange (ETDEWEB)

    Richard, C.W. III; Cox, D.R.; Kapp, L.; Murnane, J. (Univ. of California, San Francisco, CA (United States)); Cornelis, F.; Julier, C.; Lathrop, M.; James, M.R. (Centre d' Etude du Polymorphisme Humain, Paris (France))

    1993-07-01

    The authors describe a high-resolution radiation hybrid map of human chromosome 11q22-q23 containing the ataxia-telangiectasia (AT) disease gene loci. The order and intermarker distances of 32 chromosome 11q22-q23 markers were determined by a multipoint maximum likelihood method analysis of the cosegregation of markers in 100 radiation hybrids. The radiation hybrid map of polymorphic loci was consistent with genetic linkage maps of common markers. Several genes, including [alpha]B-crystallin, adrenal ferrodoxin, CBL2, collagenase, dopamine receptor type 2, neural cell adhesion molecule, progesterone receptor, and stromelysins 1 and 2, were placed in relation to previously ordered, genetically mapped polymorphic loci. Five new markers ([alpha]B-crystallin, adrenal ferrodoxin, CJ52.114, CJ52.3, and D11S535) were ordered within the current published flanking markers for the AT group A and group C disease loci. A candidate AT group D gene (ATDC) identified by Kapp et al. was mapped telomeric to THY1, outside the flanking markers identified by multipoint linkage analysis for the major AT locus. 29 refs., 1 fig., 2 tabs.

  3. Bayesian Atmospheric Radiative Transfer (BART) Code and Application to WASP-43b

    Science.gov (United States)

    Blecic, Jasmina; Harrington, Joseph; Cubillos, Patricio; Bowman, Oliver; Rojo, Patricio; Stemm, Madison; Lust, Nathaniel B.; Challener, Ryan; Foster, Austin James; Foster, Andrew S.; Blumenthal, Sarah D.; Bruce, Dylan

    2016-01-01

    We present a new open-source Bayesian radiative-transfer framework, Bayesian Atmospheric Radiative Transfer (BART, https://github.com/exosports/BART), and its application to WASP-43b. BART initializes a model for the atmospheric retrieval calculation, generates thousands of theoretical model spectra using parametrized pressure and temperature profiles and line-by-line radiative-transfer calculation, and employs a statistical package to compare the models with the observations. It consists of three self-sufficient modules available to the community under the reproducible-research license, the Thermochemical Equilibrium Abundances module (TEA, https://github.com/dzesmin/TEA, Blecic et al. 2015}, the radiative-transfer module (Transit, https://github.com/exosports/transit), and the Multi-core Markov-chain Monte Carlo statistical module (MCcubed, https://github.com/pcubillos/MCcubed, Cubillos et al. 2015). We applied BART on all available WASP-43b secondary eclipse data from the space- and ground-based observations constraining the temperature-pressure profile and molecular abundances of the dayside atmosphere of WASP-43b. This work was supported by NASA Planetary Atmospheres grant NNX12AI69G and NASA Astrophysics Data Analysis Program grant NNX13AF38G. JB holds a NASA Earth and Space Science Fellowship.

  4. Oncogene amplification detected by in situ hybridization in radiation induced rat skin tumors. [C-myc:a3

    Energy Technology Data Exchange (ETDEWEB)

    Yi Jin.

    1991-02-01

    Oncogene activation may play an important role in radiation induced carcinogenesis. C-myc oncogene amplification was detected by in situ hybridization in radiation-induced rat skin tumors, including squamous and basal cell carcinomas. In situ hybridization was performed with a biotinylated human c-myc third exon probe, visualized with an avidin-biotinylated alkaline phosphate detection system. No c-myc oncogene amplification was detected in normal rat skin at very early times after exposure to ionizing radiation, which is consistent with the view that c-myc amplification is more likely to be related to carcinogenesis than to normal cell proliferation. The incorporation of tritiated thymidine into the DNA of rat skin cells showed that the proliferation of epidermal cells reached a peak on the seventh day after exposure to ionizing radiation and then decreased. No connection between the proliferation of epidermal cell and c-myc oncogene amplification in normal or irradiated rat skin was found. The results indicated that c-myc amplification as measured by in situ hybridization was correlated with the Southern bolt results, but only some of the cancer cells were amplified. The c-myc positive cells were distributed randomly within regions of the tumor and exhibited a more uniform nuclear structure in comparison to the more vacuolated c-myc negative cells. No c-myc signal was detected in unirradiated normal skin or in irradiated skin cells near the tumors. C-myc amplification appears to be cell or cell cycle specific within radiation-induced carcinomas. 28 refs., 3 figs., 3 tabs.

  5. Synthesis of the scientific French speaking days on numerical codes in radiation protection, in radio physics and in dosimetry; Synthese des journees scientifiques francophones portant sur les codes de calculs en radioprotection, radiophysique et dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    Paul, D. [Universite de la Mediterranee, Faculte de Pharmacie, Service de Medecine et Sante au Travail, Lab. de Biogenotoxicologie et Mutagenese Environnement (EA 1784-IFR PMSE 112), 13 - Marseille (France); Makovicka, L. [Centre National de la Recherche Scientifique (CNRS), RMA/CREST/FEMTO-ST, UMR 6174, 25 - Montbeliard (France); Ricard, M. [Institut Gustave Roussy, Service de Physique, 94 - Villejuif (France)

    2005-03-01

    Synthesis of the scientific French speaking days on numerical codes in radiation protection, in radio-physics and in dosimetry. The paper carries the title of 'French speaking' scientific days co-organized on October 2-3, 2003 in Sochaux by the SFRP, SFPM and FIRAM societies. It has for objective to establish the scientific balance sheet of this international event, to give the synthesis of current tendencies in the field of the development and of the use of the numerical codes in radiation protection, in radio-physics and in dosimetry. (author)

  6. General circulation and thermal structure simulated by a Venus AGCM with a two-stream radiative code

    Science.gov (United States)

    Yamamoto, Masaru; Ikeda, Kohei; Takahashi, Masaaki

    2016-10-01

    Atmospheric general circulation model (AGCM) is expected to be a powerful tool for understanding Venus climate and atmospheric dynamics. At the present stage, however, the full-physics model is under development. Ikeda (2011) developed a two-stream radiative transfer code, which covers the solar to infrared radiative processes due to the gases and aerosol particles. The radiative code was applied to Venus AGCM (T21L52) at Atmosphere and Ocean Research Institute, Univ. Tokyo. We analyzed the results in a few Venus days simulation that was restarted after nudging zonal wind to a super-rotating state until the equilibrium. The simulated thermal structure has low-stability layer around 105 Pa at low latitudes, and the neutral stability extends from ˜105 Pa to the lower atmosphere at high latitudes. At the equatorial cloud top, the temperature lowers in the region between noon and evening terminator. For zonal and meridional winds, we can see difference between the zonal and day-side means. As was indicated in previous works, the day-side mean meridional wind speed mostly corresponds to the poleward component of the thermal tide and is much higher than the zonal mean. Toward understanding dynamical roles of waves in UV cloud tracking and brightness, we calculated the eddy heat and momentum fluxes averaged over the day-side hemisphere. The eddy heat and momentum fluxes are poleward in the poleward flank of the jet. In contrast, the fluxes are relatively weak and equatorward at low latitudes. The eddy momentum flux becomes equatorward in the dynamical situation that the simulated equatorial wind is weaker than the midlatitude jet. The sensitivity to the zonal flow used for the nudging will be also discussed in the model validation.

  7. On the Green's function of the partially diffusion-controlled reversible ABCD reaction for radiation chemistry codes

    Science.gov (United States)

    Plante, Ianik; Devroye, Luc

    2015-09-01

    Several computer codes simulating chemical reactions in particles systems are based on the Green's functions of the diffusion equation (GFDE). Indeed, many types of chemical systems have been simulated using the exact GFDE, which has also become the gold standard for validating other theoretical models. In this work, a simulation algorithm is presented to sample the interparticle distance for partially diffusion-controlled reversible ABCD reaction. This algorithm is considered exact for 2-particles systems, is faster than conventional look-up tables and uses only a few kilobytes of memory. The simulation results obtained with this method are compared with those obtained with the independent reaction times (IRT) method. This work is part of our effort in developing models to understand the role of chemical reactions in the radiation effects on cells and tissues and may eventually be included in event-based models of space radiation risks. However, as many reactions are of this type in biological systems, this algorithm might play a pivotal role in future simulation programs not only in radiation chemistry, but also in the simulation of biochemical networks in time and space as well.

  8. On the Green's function of the partially diffusion-controlled reversible ABCD reaction for radiation chemistry codes

    Energy Technology Data Exchange (ETDEWEB)

    Plante, Ianik, E-mail: ianik.plante-1@nasa.gov [Wyle Science, Technology & Engineering, 1290 Hercules, Houston, TX 77058 (United States); Devroye, Luc, E-mail: lucdevroye@gmail.com [School of Computer Science, McGill University, 3480 University Street, Montreal H3A 0E9 (Canada)

    2015-09-15

    Several computer codes simulating chemical reactions in particles systems are based on the Green's functions of the diffusion equation (GFDE). Indeed, many types of chemical systems have been simulated using the exact GFDE, which has also become the gold standard for validating other theoretical models. In this work, a simulation algorithm is presented to sample the interparticle distance for partially diffusion-controlled reversible ABCD reaction. This algorithm is considered exact for 2-particles systems, is faster than conventional look-up tables and uses only a few kilobytes of memory. The simulation results obtained with this method are compared with those obtained with the independent reaction times (IRT) method. This work is part of our effort in developing models to understand the role of chemical reactions in the radiation effects on cells and tissues and may eventually be included in event-based models of space radiation risks. However, as many reactions are of this type in biological systems, this algorithm might play a pivotal role in future simulation programs not only in radiation chemistry, but also in the simulation of biochemical networks in time and space as well.

  9. FESTR: Finite-Element Spectral Transfer of Radiation spectroscopic modeling and analysis code

    Science.gov (United States)

    Hakel, Peter

    2016-10-01

    We report on the development of a new spectral postprocessor of hydrodynamic simulations of hot, dense plasmas. Based on given time histories of one-, two-, and three-dimensional spatial distributions of materials, and their local temperature and density conditions, spectroscopically-resolved signals are computed. The effects of radiation emission and absorption by the plasma on the emergent spectra are simultaneously taken into account. This program can also be used independently of hydrodynamic calculations to analyze available experimental data with the goal of inferring plasma conditions. Catalogue identifier: AFAR_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AFAR_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: BSD 3-Clause license No. of lines in distributed program, including test data, etc.: 1237516 No. of bytes in distributed program, including test data, etc.: 17542918 Distribution format: tar.gz Programming language: C++. Computer: HPC, PC. Operating system: Linux, MacOS. RAM: Problem dependent (based on size of input) Classification: 1.3, 2.2, 20.2. Nature of problem: Calculation of spectral signals by postprocessing hydrodynamics simulations. Analysis of experimental spectroscopic data to infer plasma temperature and density conditions, and its chemical composition. Simultaneous treatment of spatial non-uniformity (on 3D unstructured meshes) along with spectroscopic-quality radiation transport. Solution method: Rays are cast across a 3D unstructured mesh that characterizes local temperature, density, and chemical composition of the material. Analytic solution to the 1D (along the ray) steady-state, local radiation transport equation is repeatedly used to gradually build a synthetic spectrum for each ray. Restrictions: Steady-state approximation of the radiation transport equation is used. Scattering as a radiation source is not included. Given plasma conditions are

  10. FY05 LDRD Final Report Molecular Radiation Biodosimetry LDRD Project Tracking Code: 04-ERD-076

    Energy Technology Data Exchange (ETDEWEB)

    Jones, I M; A.Coleman, M; Lehmann, J; Manohar, C F; Marchetti, F; Mariella, R; Miles, R; Nelson, D O; Wyrobek, A J

    2006-02-03

    In the event of a nuclear or radiological accident or terrorist event, it is important to identify individuals that can benefit from prompt medical care and to reassure those that do not need it. Achieving these goals will maximize the ability to manage the medical consequences of radiation exposure that unfold over a period of hours, days, weeks, years, depending on dose. Medical interventions that reduce near term morbidity and mortality from high but non-lethal exposures require advanced medical support and must be focused on those in need as soon as possible. There are two traditional approaches to radiation dosimetry, physical and biological. Each as currently practiced has strengths and limitations. Physical dosimetry for radiation exposure is routine for selected sites and for individual nuclear workers in certain industries, medical centers and research institutions. No monitoring of individuals in the general population is currently performed. When physical dosimetry is available at the time of an accident/event or soon thereafter, it can provide valuable information in support of accident/event triage. Lack of data for most individuals is a major limitation, as differences in exposure can be significant due to shielding, atmospherics, etc. A smaller issue in terms of number of people affected is that the same dose may have more or less biological effect on subsets of the population. Biological dosimetry is the estimation of exposure based on physiological or cellular alterations induced in an individual by radiation. The best established and precise biodosimetric methods are measurement of the decline of blood cells over time and measurement of the frequency of chromosome aberrations. In accidents or events affecting small numbers of people, it is practical to allocate the resources and time (days of clinical follow-up or specialists laboratory time) to conduct these studies. However, if large numbers of people have been exposed, or fear they may have

  11. Efficient Emulation of Radiative Transfer Codes Using Gaussian Processes and Application to Land Surface Parameter Inferences

    OpenAIRE

    José Luis Gómez-Dans; Philip Edward Lewis; Mathias Disney

    2016-01-01

    There is an increasing need to consistently combine observations from different sensors to monitor the state of the land surface. In order to achieve this, robust methods based on the inversion of radiative transfer (RT) models can be used to interpret the satellite observations. This typically results in an inverse problem, but a major drawback of these methods is the computational complexity. We introduce the concept of Gaussian Process (GP) emulators: surrogate functions that accurately ap...

  12. MagRad: A code to optimize the operation of superconducting magnets in a radiation environment

    Energy Technology Data Exchange (ETDEWEB)

    Yeaw, Christopher T. [Univ. of Wisconsin, Madison, WI (United States)

    1995-01-01

    A powerful computational tool, called MagRad, has been developed which optimizes magnet design for operation in radiation fields. Specifically, MagRad has been used for the analysis and design modification of the cable-in-conduit conductors of the TF magnet systems in fusion reactor designs. Since the TF magnets must operate in a radiation environment which damages the material components of the conductor and degrades their performance, the optimization of conductor design must account not only for start-up magnet performance, but also shut-down performance. The degradation in performance consists primarily of three effects: reduced stability margin of the conductor; a transition out of the well-cooled operating regime; and an increased maximum quench temperature attained in the conductor. Full analysis of the magnet performance over the lifetime of the reactor includes: radiation damage to the conductor, stability, protection, steady state heat removal, shielding effectiveness, optimal annealing schedules, and finally costing of the magnet and reactor. Free variables include primary and secondary conductor geometric and compositional parameters, as well as fusion reactor parameters. A means of dealing with the radiation damage to the conductor, namely high temperature superconductor anneals, is proposed, examined, and demonstrated to be both technically feasible and cost effective. Additionally, two relevant reactor designs (ITER CDA and ARIES-II/IV) have been analyzed. Upon addition of pure copper strands to the cable, the ITER CDA TF magnet design was found to be marginally acceptable, although much room for both performance improvement and cost reduction exists. A cost reduction of 10-15% of the capital cost of the reactor can be achieved by adopting a suitable superconductor annealing schedule. In both of these reactor analyses, the performance predictive capability of MagRad and its associated costing techniques have been demonstrated.

  13. QED radiative corrections for electroproduction: modernising the COMPASS code - Summer Student Programme 2015 - Final Report

    CERN Document Server

    Latacz, Barbara Maria

    2015-01-01

    Program TERAD is a well known tool to calculate radiative corrections for an inclusive lepton-nucleus deep inelastic scattering. It was originally written in FORTRAN 77. Several collaborations were using it for many yearsw adding corrections using the Patchy package. After years of using Patchy and TERAD together it needed to be reordered. The new version, called Terad15, is described in this report. It has the same functionality as the old TERAD but is written only in FORTRAN 77.

  14. Potential of Hybrid Computational Phantoms for Retrospective Heart Dosimetry After Breast Radiation Therapy: A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Moignier, Alexandra, E-mail: alexandra.moignier@irsn.fr [Institut de Radioprotection et de Surete Nucleaire, Fontenay-aux-Roses (France); Derreumaux, Sylvie; Broggio, David; Beurrier, Julien [Institut de Radioprotection et de Surete Nucleaire, Fontenay-aux-Roses (France); Chea, Michel; Boisserie, Gilbert [Groupe Hospitalier Pitie Salpetriere, Service de Radiotherapie, Paris (France); Franck, Didier; Aubert, Bernard [Institut de Radioprotection et de Surete Nucleaire, Fontenay-aux-Roses (France); Mazeron, Jean-Jacques [Groupe Hospitalier Pitie Salpetriere, Service de Radiotherapie, Paris (France)

    2013-02-01

    Purpose: Current retrospective cardiovascular dosimetry studies are based on a representative patient or simple mathematic phantoms. Here, a process of patient modeling was developed to personalize the anatomy of the thorax and to include a heart model with coronary arteries. Methods and Materials: The patient models were hybrid computational phantoms (HCPs) with an inserted detailed heart model. A computed tomography (CT) acquisition (pseudo-CT) was derived from HCP and imported into a treatment planning system where treatment conditions were reproduced. Six current patients were selected: 3 were modeled from their CT images (A patients) and the others were modelled from 2 orthogonal radiographs (B patients). The method performance and limitation were investigated by quantitative comparison between the initial CT and the pseudo-CT, namely, the morphology and the dose calculation were compared. For the B patients, a comparison with 2 kinds of representative patients was also conducted. Finally, dose assessment was focused on the whole coronary artery tree and the left anterior descending coronary. Results: When 3-dimensional anatomic information was available, the dose calculations performed on the initial CT and the pseudo-CT were in good agreement. For the B patients, comparison of doses derived from HCP and representative patients showed that the HCP doses were either better or equivalent. In the left breast radiation therapy context and for the studied cases, coronary mean doses were at least 5-fold higher than heart mean doses. Conclusions: For retrospective dose studies, it is suggested that HCP offers a better surrogate, in terms of dose accuracy, than representative patients. The use of a detailed heart model eliminates the problem of identifying the coronaries on the patient's CT.

  15. A fast and scalable radiation hybrid map construction and integration strategy.

    Science.gov (United States)

    Agarwala, R; Applegate, D L; Maglott, D; Schuler, G D; Schäffer, A A

    2000-03-01

    This paper describes a fast and scalable strategy for constructing a radiation hybrid (RH) map from data on different RH panels. The maps on each panel are then integrated to produce a single RH map for the genome. Recurring problems in using maps from several sources are that the maps use different markers, the maps do not place the overlapping markers in same order, and the objective functions for map quality are incomparable. We use methods from combinatorial optimization to develop a strategy that addresses these issues. We show that by the standard objective functions of obligate chromosome breaks and maximum likelihood, software for the traveling salesman problem produces RH maps with better quality much more quickly than using software specifically tailored for RH mapping. We use known algorithms for the longest common subsequence problem as part of our map integration strategy. We demonstrate our methods by reconstructing and integrating maps for markers typed on the Genebridge 4 (GB4) and the Stanford G3 panels publicly available from the RH database. We compare map quality of our integrated map with published maps for GB4 panel and G3 panel by considering whether markers occur in the same order on a map and in DNA sequence contigs submitted to GenBank. We find that all of the maps are inconsistent with the sequence data for at least 50% of the contigs, but our integrated maps are more consistent. The map integration strategy not only scales to multiple RH maps but also to any maps that have comparable criteria for measuring map quality. Our software improves on current technology for doing RH mapping in areas of computation time and algorithms for considering a large number of markers for mapping. The essential impediments to producing dense high-quality RH maps are data quality and panel size, not computation.

  16. NUSTART: A PC code for NUclear STructure And Radiative Transition analysis and supplementation

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, G.L.; Gardner, D.G.; Gardner, M.A.

    1990-10-01

    NUSTART is a computer program for the IBM PC/At. It is designed for use with the nuclear reaction cross-section code STAPLUS, which is a STAPRE-based CRAY computer code that is being developed at Lawrence Livermore National Laboratory. The NUSTART code was developed to handle large sets of discrete nuclear levels and the multipole transitions among these levels; it operates in three modes. The Data File Error Analysis mode analyzes an existing STAPLUS input file containing the levels and their multipole transition branches for a number of physics and/or typographical errors. The Interactive Data File Generation mode allows the user to create input files of discrete levels and their branching fractions in the format required by STAPLUS, even though the user enters the information in the (different) format used by many people in the nuclear structure field. In the Branching Fractions Calculations mode, the discrete nuclear level set is read, and the multipole transitions among the levels are computed under one of two possible assumptions: (1) the levels have no collective character, or (2) the levels are all rotational band heads. Only E1, M1, and E2 transitions are considered, and the respective strength functions may be constants or, in the case of E1 transitions, the strength function may be energy dependent. The first option is used for nuclei closed shells; the bandhead option may be used to vary the E1, M1, and E2 strengths for interband transitions. K-quantum number selection rules may be invoked if desired. 19 refs.

  17. A fast Monte Carlo code for proton transport in radiation therapy based on MCNPX

    OpenAIRE

    Keyvan Jabbari; Jan Seuntjens

    2014-01-01

    An important requirement for proton therapy is a software for dose calculation. Monte Carlo is the most accurate method for dose calculation, but it is very slow. In this work, a method is developed to improve the speed of dose calculation. The method is based on pre-generated tracks for particle transport. The MCNPX code has been used for generation of tracks. A set of data including the track of the particle was produced in each particular material (water, air, lung tissue, bone, and soft t...

  18. A Computer Code to Calculate Emission and Transmission of Infrared Radiation through Non-Equilibrium Atmospheres.

    Science.gov (United States)

    1983-07-08

    CALCULATE Sinii.ItrmEMISSION AND TRANSMISSION OF INFRARED Sinii.Itrm RADIATION THROUGH NON-EQUILIBRIUM G. PERFORMING O1G. REPORT NUMBER ATMOSPHERES ERP ...8217 669.726-3 .9144J.1. *S4!468E+14 .S6d36E*14 .99414E414 *669.7265 .695eOE.1. .921910E+14 .94616E+14 .97342E414 ’ Saa hit.tZi!tt f.73 1Eti- .IMU1 -4 SIACIF+±4

  19. Radiation hardness assessment of the charge-integrating hybrid pixel detector JUNGFRAU 1.0 for photon science

    Energy Technology Data Exchange (ETDEWEB)

    Jungmann-Smith, J. H., E-mail: jsmith@magnet.fsu.edu; Bergamaschi, A.; Brückner, M.; Dinapoli, R.; Greiffenberg, D.; Jaggi, A.; Maliakal, D.; Mayilyan, D.; Mezza, D.; Mozzanica, A.; Ramilli, M.; Ruder, Ch.; Schädler, L.; Schmitt, B.; Shi, X.; Tinti, G. [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Cartier, S. [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Institute for Biomedical Engineering, University and ETHZ, 8092 Zürich (Switzerland); Medjoubi, K. [Synchrotron Soleil, L’Orme des Merisiers, Saint-Aubin–BP 48, 91192 GIF-sur-Yvette Cedex (France)

    2015-12-15

    JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector for photon science applications in free electron lasers, particularly SwissFEL, and synchrotron light sources. JUNGFRAU is an automatic gain switching, charge-integrating detector which covers a dynamic range of more than 10{sup 4} photons of an energy of 12 keV with a good linearity, uniformity of response, and spatial resolving power. The JUNGFRAU 1.0 application-specific integrated circuit (ASIC) features a 256 × 256 pixel matrix of 75 × 75 μm{sup 2} pixels and is bump-bonded to a 320 μm thick Si sensor. Modules of 2 × 4 chips cover an area of about 4 × 8 cm{sup 2}. Readout rates in excess of 2 kHz enable linear count rate capabilities of 20 MHz (at 12 keV) and 50 MHz (at 5 keV). The tolerance of JUNGFRAU to radiation is a key issue to guarantee several years of operation at free electron lasers and synchrotrons. The radiation hardness of JUNGFRAU 1.0 is tested with synchrotron radiation up to 10 MGy of delivered dose. The effect of radiation-induced changes on the noise, baseline, gain, and gain switching is evaluated post-irradiation for both the ASIC and the hybridized assembly. The bare JUNGFRAU 1.0 chip can withstand doses as high as 10 MGy with minor changes to its noise and a reduction in the preamplifier gain. The hybridized assembly, in particular the sensor, is affected by the photon irradiation which mainly shows as an increase in the leakage current. Self-healing of the system is investigated during a period of 11 weeks after the delivery of the radiation dose. Annealing radiation-induced changes by bake-out at 100 °C is investigated. It is concluded that the JUNGFRAU 1.0 pixel is sufficiently radiation-hard for its envisioned applications at SwissFEL and synchrotron beam lines.

  20. A CASE FOR HYBRID INSTRUCTION ENCODING FOR REDUCING CODE SIZE IN EMBEDDED SYSTEM-ON-CHIPS BASED ON RISC PROCESSOR CORES

    Directory of Open Access Journals (Sweden)

    Govindarajalu Bakthavatsalam

    2014-01-01

    Full Text Available Embedded computing differs from general purpose computing in several aspects. In most embedded systems, size, cost and power consumption are more important than performance. In embedded System-on-Chips (SoC, memory is a scarce resource and it poses constraints on chip space, cost and power consumption. Whereas fixed instruction length feature of RISC architecture simplifies instruction decoding and pipeline implementation, its undesirable side effect is code size increase caused by large number of unused bits. Code size reduction minimizes memory size, chip space and power consumption all of which are significant for low power portable embedded systems. Though code size reduction has drawn the attention of architects and developers, the solutions currently used are more of cure than of prevention. Considering the huge number of embedded applications, there is a need for a dedicated processor optimized for low power and portable embedded systems. In the study, we propose a variation of Hybrid Instruction Encoding (HIE for the embedded processors. Our scheme uses fixed number of multiple instruction lengths with provision for hybrid sizes for the offset and the immediate fields thereby reducing the number of unused bits. We simulated the HIE for the MIPS32 processors and measured code sizes of various embedded applications of MiBench and MediaBench benchmarks using an offline tool developed newly. We noticed up to 27% code reduction for large and medium sized embedded applications respectively. This results in reduction of on-chip memory capacity up to 1 mega bytes that is very significant for SoC based embedded applications. Considering the large market share of embedded systems, it is worth investing in a new architecture and development of dedicated HIE-RISC processor cores for portable embedded systems based on SoCs.

  1. A New Multi-Energy Neutrino Radiation-Hydrodynamics Code in Full General Relativity and Its Application to Gravitational Collapse of Massive Stars

    CERN Document Server

    Kuroda, Takami; Kotake, Kei

    2015-01-01

    We present a new multi-dimensional radiation-hydrodynamics code for massive stellar core-collapse in full general relativity (GR). Employing an M1 analytical closure scheme, we solve spectral neutrino transport of the radiation energy and momentum based on a truncated moment formalism. Regarding neutrino opacities, we take into account the so-called standard set in state-of-the-art simulations, in which inelastic neutrino-electron scattering, thermal neutrino production via pair annihilation and nucleon-nucleon bremsstrahlung are included. In addition to gravitational redshift and Doppler effects, these energy-coupling reactions are incorporated in the moment equations in a covariant form. While the Einstein field equations and the spatial advection terms in the radiation-hydrodynamics equations are evolved explicitly, the source terms due to neutrino-matter interactions and energy shift in the radiation moment equations are integrated implicitly by an iteration method. To verify our code, we conduct several ...

  2. Three-Dimensional General Relativistic Radiation Magnetohydrodynamical Simulation of Super-Eddington Accretion, using a new code HARMRAD with M1 Closure

    CERN Document Server

    McKinney, Jonathan C; Sadowski, Aleksander; Narayan, Ramesh

    2013-01-01

    Black hole (BH) accretion flows and jets are dynamic hot relativistic magnetized plasma flows whose radiative opacity can significantly affect flow structure and behavior. We describe a numerical scheme, tests, and an astrophysically relevant application using the M1 radiation closure within a new three-dimensional (3D) general relativistic (GR) radiation (R) magnetohydrodynamics (MHD) massively parallel code called HARMRAD. Our 3D GRRMHD simulation of super-Eddington accretion (about $20$ times Eddington) onto a rapidly rotating BH (dimensionless spin $j=0.9375$) shows sustained non-axisymmemtric disk turbulence, a persistent electromagnetic jet driven by the Blandford-Znajek effect, and a total radiative output consistently near the Eddington rate. The total accretion efficiency is of order $20\\%$, the large-scale electromagnetic jet efficiency is of order $10\\%$, and the total radiative efficiency that reaches large distances remains low at only order $1\\%$. However, the radiation jet and the electromagnet...

  3. Radiation shielding analysis for 50 kVp x-ray intra-operative radiotherapy (IORT) device using MCNPX code

    Energy Technology Data Exchange (ETDEWEB)

    Wang Zhao Jun; Yeom, Yeon Soo; Kim, Chan Hyeong [Hanyang University, Seoul (Korea, Republic of)

    2014-04-15

    The present study performed Monte Carlo simulations for the 50 kVp X-ray intra-operative radiotherapy (IORT) device for detailed radiation shielding analysis. The INTRABEAM system (Carl Zeiss Surgical, Oberkochen, Germany) is a compact 50 kVp X-ray device used for intra-operative radiotherapy (IORT) especially for breast cancer. The IORT system has the advantages of very rapid dose gradient and, due to the on/off switching system, no risk of contamination when compared to nuclear medicine procedure. In contrast to megavoltage radiotherapy system requiring a dedicated shielding bunker, the IORT system is generally performed in standard operating theatres and simply uses a thin shield on the treated area and lead screens for protection of staffs who stay in the theatre during treatment. For detailed radiation shielding analysis of the IORT system, the present study performed Monte Carlo simulations with the MCNPX code to calculate dose rate distributions and investigated effects of several shielding components generally considered in this system. It was shown that shielding with flat cover and lead screen generally used is sufficient to reduce occupational doses to a negligible level. The analysis results of this study can be referred to estimate shielding requirements for other IORT systems.

  4. Development of parallel monte carlo electron and photon transport (PMCEPT) code III: Applications to medical radiation physics

    Science.gov (United States)

    Kum, Oyeon; Han, Youngyih; Jeong, Hae Sun

    2012-05-01

    Minimizing the differences between dose distributions calculated at the treatment planning stage and those delivered to the patient is an essential requirement for successful radiotheraphy. Accurate calculation of dose distributions in the treatment planning process is important and can be done only by using a Monte Carlo calculation of particle transport. In this paper, we perform a further validation of our previously developed parallel Monte Carlo electron and photon transport (PMCEPT) code [Kum and Lee, J. Korean Phys. Soc. 47, 716 (2005) and Kim and Kum, J. Korean Phys. Soc. 49, 1640 (2006)] for applications to clinical radiation problems. A linear accelerator, Siemens' Primus 6 MV, was modeled and commissioned. A thorough validation includes both small fields, closely related to the intensity modulated radiation treatment (IMRT), and large fields. Two-dimensional comparisons with film measurements were also performed. The PMCEPT results, in general, agreed well with the measured data within a maximum error of about 2%. However, considering the experimental errors, the PMCEPT results can provide the gold standard of dose distributions for radiotherapy. The computing time was also much faster, compared to that needed for experiments, although it is still a bottleneck for direct applications to the daily routine treatment planning procedure.

  5. Development of radiative transfer code for JUICE/SWI mission toward the atmosphere of icy moons of Jupiter

    Science.gov (United States)

    Yamada, Takayoshi; Kasai, Yasuko; Yoshida, Naohiro

    2016-07-01

    The Submillimeter Wave Instrument (SWI) is one of the scientific instruments on the JUpiter Icy moon Explorer (JUICE). We plan to observe atmospheric compositions including water vapor and its isotopomers in Galilean moons (Io, Europa, Ganymede, and Callisto). The frequency windows of SWI are 530 to 625 GHz and 1080 to 1275 GHz with 100 kHz spectral resolution. We are developing a radiative transfer code in Japan with line-by-line method for Ganymede atmosphere in THz region (0 - 3 THz). Molecular line parameters (line intensity and partition function) were taken from JPL (Jet Propulsion Laboratory) catalogue. The pencil beam was assumed to calculate a spectrum of H _{2}O and CO in rotational transitions at the THz region. We performed comparisons between our model and ARTS (Atmospheric Radiative Transfer Simulator). The difference were less than 10% and 5% for H _{2}O and CO, respectively, under the condition of the local thermodynamic equilibrium (LTE). Comparison with several models with non-LTE assumption will be presented.

  6. Plant breeding by using radiation mutation - Development of disease tolerant lines of hotpepper by using radiation and interspecific hybridization

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Su; Song, Hi Sup; Kim, Jin Kyu; Shin, In Chul [Nongwoo Seed Co., Suwon (Korea)

    2000-04-01

    To obtain disease resistant mutant lines, 6 inbred lines were hotppepers were irradiated with 250Gy of gamma ray and crossed between cultivar and wild species. 1) 4500 M{sub 1} plants were cultivated for obtaining M{sub 2} seed in 6 inbred lines of hotpeppers irradiated with 250 Gy of gamma ray. 2) Crossability was not generally existed among interspecific crosses, crossability between C. annum and C. chacoense was successful except crosses between C. annum, C. pubescens and C. eximium. 3) The embryo disected 45 days after pollination was suitable for embryo culture. 4) Hybrid plants were obtained from the embryo culture of the combination between C. annum and C. chacoense, while abnormal hybrid plants occurred from the combination between C. annum and C. baccatum. 15 refs., 4 figs., 4 tabs. (Author)

  7. A second generation radiation hybrid map to aid the assembly of the bovine genome sequence

    Directory of Open Access Journals (Sweden)

    Janitz Michal

    2006-11-01

    Full Text Available Abstract Background Several approaches can be used to determine the order of loci on chromosomes and hence develop maps of the genome. However, all mapping approaches are prone to errors either arising from technical deficiencies or lack of statistical support to distinguish between alternative orders of loci. The accuracy of the genome maps could be improved, in principle, if information from different sources was combined to produce integrated maps. The publicly available bovine genomic sequence assembly with 6× coverage (Btau_2.0 is based on whole genome shotgun sequence data and limited mapping data however, it is recognised that this assembly is a draft that contains errors. Correcting the sequence assembly requires extensive additional mapping information to improve the reliability of the ordering of sequence scaffolds on chromosomes. The radiation hybrid (RH map described here has been contributed to the international sequencing project to aid this process. Results An RH map for the 30 bovine chromosomes is presented. The map was built using the Roslin 3000-rad RH panel (BovGen RH map and contains 3966 markers including 2473 new loci in addition to 262 amplified fragment-length polymorphisms (AFLP and 1231 markers previously published with the first generation RH map. Sequences of the mapped loci were aligned with published bovine genome maps to identify inconsistencies. In addition to differences in the order of loci, several cases were observed where the chromosomal assignment of loci differed between maps. All the chromosome maps were aligned with the current 6× bovine assembly (Btau_2.0 and 2898 loci were unambiguously located in the bovine sequence. The order of loci on the RH map for BTA 5, 7, 16, 22, 25 and 29 differed substantially from the assembled bovine sequence. From the 2898 loci unambiguously identified in the bovine sequence assembly, 131 mapped to different chromosomes in the BovGen RH map. Conclusion Alignment of the

  8. Coupling External Radiation Transport Code Results to the GADRAS Detector Response Function

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Dean J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Contraband Detection; Thoreson, Gregory G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Contraband Detection; Horne, Steven M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Contraband Detection

    2014-01-01

    Simulating gamma spectra is useful for analyzing special nuclear materials. Gamma spectra are influenced not only by the source and the detector, but also by the external, and potentially complex, scattering environment. The scattering environment can make accurate representations of gamma spectra difficult to obtain. By coupling the Monte Carlo Nuclear Particle (MCNP) code with the Gamma Detector Response and Analysis Software (GADRAS) detector response function, gamma spectrum simulations can be computed with a high degree of fidelity even in the presence of a complex scattering environment. Traditionally, GADRAS represents the external scattering environment with empirically derived scattering parameters. By modeling the external scattering environment in MCNP and using the results as input for the GADRAS detector response function, gamma spectra can be obtained with a high degree of fidelity. This method was verified with experimental data obtained in an environment with a significant amount of scattering material. The experiment used both gamma-emitting sources and moderated and bare neutron-emitting sources. The sources were modeled using GADRAS and MCNP in the presence of the external scattering environment, producing accurate representations of the experimental data.

  9. Insights into prolonged solution criticality incidents, using the coupled radiation/multiphase code FETCH

    Energy Technology Data Exchange (ETDEWEB)

    Pain, C.C.; Oliveira, C.R.E. de; Goddard, A.J.H. [T.H. Huxley School of the Environment, Earth Sciences and Engineering, Imperial College, London (United Kingdom)

    2000-12-01

    The development of the FETCH transient code has been supported by the UK regulator, the Nuclear Installations Inspectorate, as a generic reference method for modelling fissile solution criticality. The fundamental basis of the method means that it can be applied to situations somewhat beyond the range of available experiment. General geometry finite-element modelling is used for the two linked modules: neutron transport and multiphase computational fluid dynamics. Multiphase modelling includes bubble dynamics, free surface motion (sloshing) and the ability to calculate pressure waves and their interaction with bubble formation. FETCH has been benchmarked against transient power and pressure results from the SILENE experiments and is being tested against published TRACY measurements. Research is being performed in order to use data from the incident at the JCO Company on 30-31 September 1999 to: (a) gain an understanding of the mechanism of criticality to improve the future safety designs of the fuel cycle facilities; and (b) to understand the mechanisms of this accident itself, for example its prolonged nature. The full published geometry of the 'sedimentation tank' has been modelled focusing on, firstly, the role of the assumed initial conditions, such as filling rate. The influence of heat removal rate upon the power during prolonged criticality phase is demonstrated. The paper comments on the role that pressure might have in influencing the consequences of criticality accidents. (author)

  10. Coupling External Radiation Transport Code Results to the GADRAS Detector Response Function

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Dean J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Contraband Detection; Thoreson, Gregory G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Contraband Detection; Horne, Steven M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Contraband Detection

    2014-01-01

    Simulating gamma spectra is useful for analyzing special nuclear materials. Gamma spectra are influenced not only by the source and the detector, but also by the external, and potentially complex scattering environment. The scattering environment can make accurate representations of gamma spectra difficult to obtain. By coupling the Monte Carlo Nuclear Particle (MCNP) code with the Gamma Detector Response and Analysis Software (GADRAS) detector response function, gamma spectrum simulations can be computed with a high degree of fidelity even in the presence of a complex scattering environment. Traditionally, GADRAS represents the external scattering environment with empirically derived scattering parameters. By modeling the external scattering environment in MCNP and using the results as input for the GADRAS detector response function, gamma spectra can be obtained with a high degree of fidelity. This method was verified with experimental data obtained in an environment with a significant amount of scattering material. The experiment used both gamma-emitting sources and moderated and bare neutron-emitting sources. The sources were modeled using GADRAS and MCNP in the presence of the external scattering environment, producing accurate representations of the experimental data.

  11. Extension of hybrid micro-depletion model for decay heat calculation in the DYN3D code

    Energy Technology Data Exchange (ETDEWEB)

    Bilodid, Yurii; Fridman, Emil [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Reactor Safety; Kotlyar, D. [Georgia Institute of Technology, Atlanta, GA (United States); Shwageraus, E. [Cambridge Univ. (United Kingdom)

    2017-06-01

    This work extends the hybrid micro-depletion methodology, recently implemented in DYN3D, to the decay heat calculation by accounting explicitly for the heat contribution from the decay of each nuclide in the fuel.

  12. Radiative and Momentum Based Mechanical AGN Feedback in a 3-Dimensional Galaxy Evolution Code

    CERN Document Server

    Choi, Ena; Naab, Thorsten; Johansson, Peter H

    2012-01-01

    We study the growth of black holes (BHs) in galaxies using three-dimensional smoothed particle hydrodynamic (SPH) simulations with new implementations of the momentum mechanical feedback, and restriction of accreted elements to those that are gravitationally bound to the BH. We also include the feedback from the X-ray radiation emitted bythe black hole, which heats the surrounding gas in the host galaxies, and adds radial momentum to the fluid. We perform simulations of isolated galaxies and merging galaxies and test various feedback models with the new treatment of the Bondi radius criterion. We find that overall the black hole growth is similar to what has been obtained by earlier workers using the Springel, Di Matteo, & Hernquist algorithms. However, the outflowing wind velocities and mechanical energy emitted by winds are considerably higher (v_w ~ 1000-3000 km/s) compared to the standard thermal feedback model (v_w ~ 50-100 km/s). While the thermal feedback model emits only 0.1 % of BH released energ...

  13. Quasi-analytical solutions of hybrid platform and the optimization of highly sensitive thin-film sensors for terahertz radiation

    CERN Document Server

    Tapsanit, Piyawath; Ishihara, Teruya; Otani, Chiko

    2016-01-01

    We present quasi-analytical solutions (QANS) of hybrid platform (HP) comprising metallic grating (MG) and stacked-dielectric layers for terahertz (THz) radiation. The QANS are validated by finite difference time domain simulation. It is found that the Wood anomalies induce the high-order spoof surface plasmon resonances in the HP. The QANS are applied to optimize new perfect absorber for THz sensing of large-area thin film with ultrahigh figure of merit reaching fifth order of magnitude for the film thickness 0.0001p (p: MG period). The first-order Wood's anomaly of the insulator layer and the Fabry-Perot in the slit's cavity account for the resonance of the perfect absorber. The QANS and the new perfect absorber may lead to highly sensitive and practical nano-film refractive index sensor for THz radiation.

  14. On the possibility to use semiconductive hybrid pixel detectors for study of radiation belt of the Earth

    CERN Document Server

    Guskov, A; Smolyanskiy, P; Zhemchugov, A

    2015-01-01

    The scientific apparatus "Gamma-400" designed for study of hadron and electromagnetic components of cosmic rays will be launched to an elliptic orbit with the apogee of about 300 000 km and the perigee of about 500 km. Such a configuration of the orbit allows it to cross periodically the radiation belt and the outer part of magnetosphere. We discuss the possibility to use hybrid pixel detecters based on the Timepix chip and semiconductive sensors on board the "Gamma-400" apparatus. Due to high granularity of the sensor (pixel size is 55 $mu$m) and possibility to measure independently an energy deposition in each pixel, such compact and lightweight detector could be a unique instrument for study of spatial, energy and time structure of electron and proton components of the radiation belt.

  15. Construction of a river buffalo (Bubalus bubalis whole-genome radiation hybrid panel and preliminary RH mapping of chromosomes 3 and 10

    Directory of Open Access Journals (Sweden)

    J.E. Womack

    2010-02-01

    Full Text Available The buffalo (Bubalus bubalis not only is a useful source of milk, it also provides meat and works as a natural source of labor and biogas. To establish a project for buffalo genome mapping a 5,000-rad whole genome radiation hybrid panel was constructed for river buffalo and used to build preliminary RH maps from two chromosomes (BBU 3 and BBU10. The preliminary maps contain 66 markers, including coding genes, cattle ESTs and microsatellite loci. The RH maps presented here are the starting point for mapping additional loci, in particular, genes and expressed sequence tags that will allow detailed comparative maps between buffalo, cattle and other species to be constructed. A large quantity of DNA has been prepared from the cell lines forming the RH panel reported here and will be made publicly available to the international community both for the study of chromosome evolution and for the improvement of traits important to the role of buffalo in animal agriculture.

  16. Efficient Emulation of Radiative Transfer Codes Using Gaussian Processes and Application to Land Surface Parameter Inferences

    Directory of Open Access Journals (Sweden)

    José Luis Gómez-Dans

    2016-02-01

    Full Text Available There is an increasing need to consistently combine observations from different sensors to monitor the state of the land surface. In order to achieve this, robust methods based on the inversion of radiative transfer (RT models can be used to interpret the satellite observations. This typically results in an inverse problem, but a major drawback of these methods is the computational complexity. We introduce the concept of Gaussian Process (GP emulators: surrogate functions that accurately approximate RT models using a small set of input (e.g., leaf area index, leaf chlorophyll, etc. and output (e.g., top-of-canopy reflectances or at sensor radiances pairs. The emulators quantify the uncertainty of their approximation, and provide a fast and easy route to estimating the Jacobian of the original model, enabling the use of e.g., efficient gradient descent methods. We demonstrate the emulation of widely used RT models (PROSAIL and SEMIDISCRETE and the coupling of vegetation and atmospheric (6S RT models targetting particular sensor bands. A comparison with the full original model outputs shows that the emulators are a viable option to replace the original model, with negligible bias and discrepancies which are much smaller than the typical uncertainty in the observations. We also extend the theory of GP to cope with models with multivariate outputs (e.g., over the full solar reflective domain, and apply this to the emulation of PROSAIL, coupled 6S and PROSAIL and to the emulation of individual spectral components of 6S. In all cases, emulators successfully predict the full model output as well as accurately predict the gradient of the model calculated by finite differences, and produce speed ups between 10,000 and 50,000 times that of the original model. Finally, we use emulators to invert leaf area index ( L A I , leaf chlorophyll content ( C a b and equivalent leaf water thickness ( C w from a time series of observations from Sentinel-2/MSI

  17. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling

    Science.gov (United States)

    Zhai, Yao; Ma, Yaoguang; David, Sabrina N.; Zhao, Dongliang; Lou, Runnan; Tan, Gang; Yang, Ronggui; Yin, Xiaobo

    2017-03-01

    Passive radiative cooling draws heat from surfaces and radiates it into space as infrared radiation to which the atmosphere is transparent. However, the energy density mismatch between solar irradiance and the low infrared radiation flux from a near-ambient-temperature surface requires materials that strongly emit thermal energy and barely absorb sunlight. We embedded resonant polar dielectric microspheres randomly in a polymeric matrix, resulting in a metamaterial that is fully transparent to the solar spectrum while having an infrared emissivity greater than 0.93 across the atmospheric window. When backed with a silver coating, the metamaterial shows a noontime radiative cooling power of 93 watts per square meter under direct sunshine. More critically, we demonstrated high-throughput, economical roll-to-roll manufacturing of the metamaterial, which is vital for promoting radiative cooling as a viable energy technology.

  18. A novel hybrid scattering order-dependent variance reduction method for Monte Carlo simulations of radiative transfer in cloudy atmosphere

    Science.gov (United States)

    Wang, Zhen; Cui, Shengcheng; Yang, Jun; Gao, Haiyang; Liu, Chao; Zhang, Zhibo

    2017-03-01

    We present a novel hybrid scattering order-dependent variance reduction method to accelerate the convergence rate in both forward and backward Monte Carlo radiative transfer simulations involving highly forward-peaked scattering phase function. This method is built upon a newly developed theoretical framework that not only unifies both forward and backward radiative transfer in scattering-order-dependent integral equation, but also generalizes the variance reduction formalism in a wide range of simulation scenarios. In previous studies, variance reduction is achieved either by using the scattering phase function forward truncation technique or the target directional importance sampling technique. Our method combines both of them. A novel feature of our method is that all the tuning parameters used for phase function truncation and importance sampling techniques at each order of scattering are automatically optimized by the scattering order-dependent numerical evaluation experiments. To make such experiments feasible, we present a new scattering order sampling algorithm by remodeling integral radiative transfer kernel for the phase function truncation method. The presented method has been implemented in our Multiple-Scaling-based Cloudy Atmospheric Radiative Transfer (MSCART) model for validation and evaluation. The main advantage of the method is that it greatly improves the trade-off between numerical efficiency and accuracy order by order.

  19. Induced chromosome aberrations analyzed by fluorescence in situ hybridization. Eight years follow up of the Goiania radiation accident victims

    Energy Technology Data Exchange (ETDEWEB)

    Natarajan, A.T.; Santos, S.J.; Darroudi, F.; Hadjidikova, V.; Vermeulen, S.; Chatterjee, S.; Van de Berg, M.; Grigorova, M. [Leiden University Medical Centrum LUMC, Department of Radiation Genetics and Chemical Mutagenesis, Wassenaarseweg 72, 2333 AL Leiden (Netherlands); Sakamoto-Hojo, E.T. [Department of Biology, Faculty of Philosophy, Sciences and Letters of Ribeirao Preto, University of Sao Paulo, Ribeirao Preto (Brazil); Granath, F. [Department of Mathematical Statistics, Stockholm University, Stockholm (Sweden); Ramalho, A.T. [Institute of Radioprotection and Dosimetry, National Commission of Nuclear Energy, Rio de Janeiro (Brazil); Curado, M.P. [Foundation Leide das Neves Ferreira, Goiania (Brazil)

    1998-05-25

    The radiation accident in focus here occurred in a section of Goiania (Brazil) where more than a hundred individuals were contaminated with on September 1987. In order to estimate the absorbed radiation doses, initial frequencies of dicentrics and rings were determined in 129 victims [A.T. Ramalho, PhD Thesis, Subsidios a tecnica de dosimetria citogenetica gerados a partir da analise de resultados obtidos com o acidente radiologico de Goiania, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil, 1992]. We have followed some of these victims cytogenetically over the years seeking for parameters that could be used as basis for retrospective radiation dosimetry. Our data on translocation frequencies obtained by fluorescence in situ hybridization (FISH) could be directly compared to the baseline frequencies of dicentrics available for those same victims. Our results provided valuable information on how precise these estimates are. The frequencies of translocations observed years after the radiation exposure were two to three times lower than the initial dicentrics frequencies, the differences being larger at higher doses (>1 Gy). The accuracy of such dose estimates might be increased by scoring sufficient amount of cells. However, factors such as the persistence of translocation carrying lymphocytes, translocation levels not proportional to chromosome size, and inter-individual variation reduce the precision of these estimates

  20. Graphite/Ultra-High Modulus Polyethylene Hybrid Fiber Composites with Epoxy and Polyethylene Matrices for Cosmic Radiation Shielding

    Science.gov (United States)

    2003-01-01

    One of the most significant technical challenges in long-duration space missions is that of protecting the crew from harmful radiation. Protection against such radiation on a manned Mars mission will be of vital importance both during transit and while on the surface of the planet. The development of multifunctional materials that serve as integral structural members of the space vehicle and provide the necessary radiation shielding for the crew would be both mission enabling and cost effective. Additionally, combining shielding and structure could reduce total vehicle mass. Hybrid laminated composite materials having both ultramodulus polyethylene (PE) and graphite fibers in epoxy and PE matrices could meet such mission requirements. PE fibers have excellent physical properties, including the highest specific strength of any known fiber. Moreover, the high hydrogen (H) content of polyethylene makes the material an excellent shielding material for cosmic radiation. When such materials are incorporated into an epoxy or PE matrix a very effective shielding material is expected. Boron (B) may be added to the matrix resin or used as a coating to further increase the shielding effectiveness due to B s ability to slow thermal neutrons. These materials may also serve as micrometeorites shields due to PE s high impact energy absorption properties. It should be noted that such materials can be fabricated by existing equipment and methods. It is the objective of this work therefore to: (a) perform preliminary analysis of the radiation transport within these materials; (b) fabricate panels for mechanical property testing before and after radiation exposure. Preliminary determination on the effectiveness of the combinations of material components on both shielding and structural efficiency will be made.

  1. Graphite/Ultra-High Modulus Polyethylene Hybrid Fiber Composites with Epoxy and Polyethylene Matrices for Cosmic Radiation Shielding

    Science.gov (United States)

    2003-01-01

    One of the most significant technical challenges in long-duration space missions is that of protecting the crew from harmful radiation. Protection against such radiation on a manned Mars mission will be of vital importance both during transit and while on the surface of the planet. The development of multifunctional materials that serve as integral structural members of the space vehicle and provide the necessary radiation shielding for the crew would be both mission enabling and cost effective. Additionally, combining shielding and structure could reduce total vehicle mass. Hybrid laminated composite materials having both ultramodulus polyethylene (PE) and graphite fibers in epoxy and PE matrices could meet such mission requirements. PE fibers have excellent physical properties, including the highest specific strength of any known fiber. Moreover, the high hydrogen (H) content of polyethylene makes the material an excellent shielding material for cosmic radiation. When such materials are incorporated into an epoxy or PE matrix a very effective shielding material is expected. Boron (B) may be added to the matrix resin or used as a coating to further increase the shielding effectiveness due to B s ability to slow thermal neutrons. These materials may also serve as micrometeorites shields due to PE s high impact energy absorption properties. It should be noted that such materials can be fabricated by existing equipment and methods. It is the objective of this work therefore to: (a) perform preliminary analysis of the radiation transport within these materials; (b) fabricate panels for mechanical property testing before and after radiation exposure. Preliminary determination on the effectiveness of the combinations of material components on both shielding and structural efficiency will be made.

  2. Monte Carlo simulation of simultaneous radiation detection in the hybrid tomography system ClearPET-XPAD3/CT

    Science.gov (United States)

    Dávila, H. Olaya; Sevilla, A. C.; Castro, H. F.; Martínez, S. A.

    2016-07-01

    Using the Geant4 based simulation framework SciFW1, a detailed simulation was performed for a detector array in the hybrid tomography prototype for small animals called ClearPET / XPAD, which was built in the Centre de Physique des Particules de Marseille. The detector system consists of an array of phoswich scintillation detectors: LSO (Lutetium Oxy-ortosilicate doped with cerium Lu2SiO5:Ce) and LuYAP (Lutetium Ortoaluminate of Yttrium doped with cerium Lu0.7Y0.3AlO3:Ce) for Positron Emission Tomography (PET) and hybrid pixel detector XPAD for Computed Tomography (CT). Simultaneous acquisition of deposited energy and the corresponding time - position for each recorded event were analyzed, independently, for both detectors. interference between detection modules for PET and CT. Information about amount of radiation reaching each phoswich crystal and XPAD detector using a phantom in order to study the effectiveness by radiation attenuation and influence the positioning of the radioactive source 22Na was obtained. The simulation proposed will improve distribution of detectors rings and interference values will be taken into account in the new versions of detectors.

  3. The Premar Code for the Monte Carlo Simulation of Radiation Transport In the Atmosphere; Il codice PREMAR per la simulazione Montecarlo del trasporto della radiazione dell`atmosfera

    Energy Technology Data Exchange (ETDEWEB)

    Cupini, E. [ENEA, Centro Ricerche `Ezio Clementel`, Bologna (Italy). Dipt. Innovazione; Borgia, M.G. [ENEA, Centro Ricerche `Ezio Clementel`, Bologna (Italy). Dipt. Energia; Premuda, M. [Consiglio Nazionale delle Ricerche, Bologna (Italy). Ist. FISBAT

    1997-03-01

    The Montecarlo code PREMAR is described, which allows the user to simulate the radiation transport in the atmosphere, in the ultraviolet-infrared frequency interval. A plan multilayer geometry is at present foreseen by the code, witch albedo possibility at the lower boundary surface. For a given monochromatic point source, the main quantities computed by the code are the absorption spatial distributions of aerosol and molecules, together with the related atmospheric transmittances. Moreover, simulation of of Lidar experiments are foreseen by the code, the source and telescope fields of view being assigned. To build-up the appropriate probability distributions, an input data library is assumed to be read by the code. For this purpose the radiance-transmittance LOWTRAN-7 code has been conveniently adapted as a source of the library so as to exploit the richness of information of the code for a large variety of atmospheric simulations. Results of applications of the PREMAR code are finally presented, with special reference to simulations of Lidar system and radiometer experiments carried out at the Brasimone ENEA Centre by the Environment Department.

  4. US medical researchers, the Nuremberg Doctors Trial, and the Nuremberg Code. A review of findings of the Advisory Committee on Human Radiation Experiments.

    Science.gov (United States)

    Faden, R R; Lederer, S E; Moreno, J D

    1996-11-27

    The Advisory Committee on Human Radiation Experiments (ACHRE), established to review allegations of abuses of human subjects in federally sponsored radiation research, was charged with identifying appropriate standards to evaluate the ethics of cold war radiation experiments. One central question for ACHRE was to determine what role, if any, the Nuremberg Code played in the norms and practices of US medical researchers. Based on the evidence from ACHRE's Ethics Oral History Project and extensive archival research, we conclude that the Code, at the time it was promulgated, had little effect on mainstream medical researchers engaged in human subjects research. Although some clinical investigators raised questions about the conduct of research involving human beings, the medical profession did not pursue this issue until the 1960s.

  5. Development And Implementation Of Photonuclear Cross-section Data For Mutually Coupled Neutron-photon Transport Calculations In The Monte Carlo N-particle (mcnp) Radiation Transport Code

    CERN Document Server

    White, M C

    2000-01-01

    The fundamental motivation for the research presented in this dissertation was the need to development a more accurate prediction method for characterization of mixed radiation fields around medical electron accelerators (MEAs). Specifically, a model is developed for simulation of neutron and other particle production from photonuclear reactions and incorporated in the Monte Carlo N-Particle (MCNP) radiation transport code. This extension of the capability within the MCNP code provides for the more accurate assessment of the mixed radiation fields. The Nuclear Theory and Applications group of the Los Alamos National Laboratory has recently provided first-of-a-kind evaluated photonuclear data for a select group of isotopes. These data provide the reaction probabilities as functions of incident photon energy with angular and energy distribution information for all reaction products. The availability of these data is the cornerstone of the new methodology for state-of-the-art mutually coupled photon-neutron tran...

  6. Assessment of ocular beta radiation dose distribution due to 106Ru/106Rh brachytherapy applicators using MCNPX Monte Carlo code

    Directory of Open Access Journals (Sweden)

    Nilseia Aparecida Barbosa

    2014-08-01

    heterogeneous eye model, indicating that the homogeneous water eye model is a reasonable one. The determined isodose curves give a good visualization of dose distributions inside the eye structures, pointing out their most exposed volume....................................................Cite this article as:Barbosa NA, da Rosa LAR, de Menezes AF, Reis JP, Facure A, Braz D. Assessment of ocular beta radiation dose distribution due to 106Ru/106Rh brachytherapy applicators using MCNPX Monte Carlo code. Int J Cancer Ther Oncol 2014; 2(3:02038. DOI: 10.14319/ijcto.0203.8

  7. Analysis of the variation of the attenuation curve in function of the radiation field size for k Vp X-ray beams using the MCNP-5C code

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Marco A.R., E-mail: marco@cetea.com.b, E-mail: marfernandes@fmb.unesp.b [Universidade Estadual Paulista Julio de Mesquita Filho (FMB/UNESP), Botucatu, SP (Brazil). Fac. de Medicina; Ribeiro, Victor A.B. [Universidade Estadual Paulista Julio de Mesquita Filho (IBB/UNESP), Botucatu, SP (Brazil). Inst. de Biociencias; Viana, Rodrigo S.S.; Coelho, Talita S. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    The paper illustrates the use of the Monte Carlo method, MCNP-5C code, to analyze the attenuation curve behavior of the 50 kVp radiation beam from superficial radiotherapy equipment as Dermopan2 model. The simulations seek to verify the MCNP-5C code performance to study the variation of the attenuation curve - percentage depth dose (PDD) curve - in function of the radiation field dimension used at radiotherapy of skin tumors with 50 kVp X-ray beams. The PDD curve was calculated for six different radiation field sizes with circular geometry of 1.0, 2.0, 3.0, 4.0, 5.0 and 6.0 cm in diameter. The radiation source was modeled considering a tungsten target with inclination 30 deg, focal point of 6.5 mm in diameter and energy beam of 50 kVp; the X-ray spectrum was calculated with the MCNP-5C code adopting total filtration (beryllium window of 1 mm and aluminum additional filter of 1 mm). The PDD showed decreasing behavior with the attenuation depth similar what is presented on the literature. There was not significant variation at the PDD values for the radiation field between 1.0 and 4.0 cm in diameter. The differences increased for fields of 5.0 and 6.0 cm and at attenuation depth higher than 1.0 cm. When it is compared the PDD values for fields of 3.0 and 6.0 cm in diameter, it verifies the greater difference (12.6 %) at depth of 5.7 cm, proving the scattered radiation effect. The MCNP-5C code showed as an appropriate procedure to analyze the attenuation curves of the superficial radiotherapy beams. (author)

  8. A Multigroup diffusion solver using pseudo transient continuation for a radiation-hydrodynamic code with patch-based AMR

    Energy Technology Data Exchange (ETDEWEB)

    Shestakov, A I; Offner, S R

    2006-09-21

    We present a scheme to solve the nonlinear multigroup radiation diffusion (MGD) equations. The method is incorporated into a massively parallel, multidimensional, Eulerian radiation-hydrodynamic code with adaptive mesh refinement (AMR). The patch-based AMR algorithm refines in both space and time creating a hierarchy of levels, coarsest to finest. The physics modules are time-advanced using operator splitting. On each level, separate 'level-solve' packages advance the modules. Our multigroup level-solve adapts an implicit procedure which leads to a two-step iterative scheme that alternates between elliptic solves for each group with intra-cell group coupling. For robustness, we introduce pseudo transient continuation ({Psi}tc). We analyze the magnitude of the {Psi}tc parameter to ensure positivity of the resulting linear system, diagonal dominance and convergence of the two-step scheme. For AMR, a level defines a subdomain for refinement. For diffusive processes such as MGD, the refined level uses Dirichet boundary data at the coarse-fine interface and the data is derived from the coarse level solution. After advancing on the fine level, an additional procedure, the sync-solve (SS), is required in order to enforce conservation. The MGD SS reduces to an elliptic solve on a combined grid for a system of G equations, where G is the number of groups. We adapt the 'partial temperature' scheme for the SS; hence, we reuse the infrastructure developed for scalar equations. Results are presented. We consider a multigroup test problem with a known analytic solution. We demonstrate utility of {Psi}tc by running with increasingly larger timesteps. Lastly, we simulate the sudden release of energy Y inside an Al sphere (r = 15 cm) suspended in air at STP. For Y = 11 kT, we find that gray radiation diffusion and MGD produce similar results. However, if Y = 1 MT, the two packages yield different results. Our large Y simulation contradicts a long-standing theory

  9. Using the FLUKA Monte Carlo Code to Simulate the Interactions of Ionizing Radiation with Matter to Assist and Aid Our Understanding of Ground Based Accelerator Testing, Space Hardware Design, and Secondary Space Radiation Environments

    Science.gov (United States)

    Reddell, Brandon

    2015-01-01

    Designing hardware to operate in the space radiation environment is a very difficult and costly activity. Ground based particle accelerators can be used to test for exposure to the radiation environment, one species at a time, however, the actual space environment cannot be duplicated because of the range of energies and isotropic nature of space radiation. The FLUKA Monte Carlo code is an integrated physics package based at CERN that has been under development for the last 40+ years and includes the most up-to-date fundamental physics theory and particle physics data. This work presents an overview of FLUKA and how it has been used in conjunction with ground based radiation testing for NASA and improve our understanding of secondary particle environments resulting from the interaction of space radiation with matter.

  10. Simultaneous reconstruction of temperature distribution and radiative properties in participating media using a hybrid LSQR PSO algorithm

    Institute of Scientific and Technical Information of China (English)

    牛春洋; 齐宏; 黄兴; 阮立明; 王伟; 谈和平

    2015-01-01

    A hybrid least-square QR decomposition (LSQR)-particle swarm optimization (LSQR–PSO) algorithm was devel-oped to estimate the three-dimensional (3D) temperature distributions and absorption coefficients simultaneously. The outgoing radiative intensities at the boundary surface of the absorbing media were simulated by the line-of-sight (LOS) method, which served as the input for the inverse analysis. The retrieval results showed that the 3D temperature distribu-tions of the participating media with known radiative properties could be retrieved accurately using the LSQR algorithm, even with noisy data. For the participating media with unknown radiative properties, the 3D temperature distributions and absorption coefficients could be retrieved accurately using the LSQR–PSO algorithm even with measurement errors. It was also found that the temperature field could be estimated more accurately than the absorption coefficients. In order to gain insight into the effects on the accuracy of temperature distribution reconstruction, the selection of the detection direction and the angle between two detection directions was also analyzed.

  11. Characterization of genomic alterations in radiation-associated breast cancer among childhood cancer survivors, using comparative genomic hybridization (CGH arrays.

    Directory of Open Access Journals (Sweden)

    Xiaohong R Yang

    Full Text Available Ionizing radiation is an established risk factor for breast cancer. Epidemiologic studies of radiation-exposed cohorts have been primarily descriptive; molecular events responsible for the development of radiation-associated breast cancer have not been elucidated. In this study, we used array comparative genomic hybridization (array-CGH to characterize genome-wide copy number changes in breast tumors collected in the Childhood Cancer Survivor Study (CCSS. Array-CGH data were obtained from 32 cases who developed a second primary breast cancer following chest irradiation at early ages for the treatment of their first cancers, mostly Hodgkin lymphoma. The majority of these cases developed breast cancer before age 45 (91%, n = 29, had invasive ductal tumors (81%, n = 26, estrogen receptor (ER-positive staining (68%, n = 19 out of 28, and high proliferation as indicated by high Ki-67 staining (77%, n = 17 out of 22. Genomic regions with low-copy number gains and losses and high-level amplifications were similar to what has been reported in sporadic breast tumors, however, the frequency of amplifications of the 17q12 region containing human epidermal growth factor receptor 2 (HER2 was much higher among CCSS cases (38%, n = 12. Our findings suggest that second primary breast cancers in CCSS were enriched for an "amplifier" genomic subgroup with highly proliferative breast tumors. Future investigation in a larger irradiated cohort will be needed to confirm our findings.

  12. Optimization of high-definition video coding and hybrid fiber-wireless transmission in the 60 GHz band

    DEFF Research Database (Denmark)

    Lebedev, Alexander; Pham, Tien Thang; Beltrán, Marta;

    2011-01-01

    We demonstrate that, by jointly optimizing video coding and radio-over-fibre transmission, we extend the reach of 60-GHz wireless distribution of high-quality high-definition video satisfying low complexity and low delay constraints, while preserving superb video quality.......We demonstrate that, by jointly optimizing video coding and radio-over-fibre transmission, we extend the reach of 60-GHz wireless distribution of high-quality high-definition video satisfying low complexity and low delay constraints, while preserving superb video quality....

  13. Cross-Layer Approach using k-NN Based Adaptive Modulation Coding (AMC and Incremental Redundancy Hybrid Automatic Repeat Request (IR-HARQ for MIMO

    Directory of Open Access Journals (Sweden)

    J. Sofia Priya Dharshini

    2014-09-01

    Full Text Available In MIMO Technology, a cross layer design enhances the spectral efficiency, reliability and throughput of the network. In this paper, a cross-layer approach using k-NN based Adaptive Modulation Coding (AMC and Incremental Redundancy Hybrid Automatic Repeat Request (IR-HARQ is proposed for MIMO Systems. The proposed cross layer approach connects physical layer and data link layer to enhance the performance of MIMO network. By means of MIMO fading channels, the coded symbols are forwarded in the physical layer on a frame by frame fashion subsequently using Space Time Block Coding (STBC. The receiver computes the signal to noise ratio (SNR and forwards back to the AMC controller. The controller selects a suitable MCS for the next transmission through k-NN classifier supervised learning algorithm. IR-HARQ is utilized at the data link layer to regulate packet retransmissions. The obtained results prove that the proposed technique has better performance in terms of throughput, BER and spectral efficiency

  14. Solution of the self-adjoint radiative transfer equation on hybrid computer systems

    Science.gov (United States)

    Gasilov, V. A.; Kuchugov, P. A.; Olkhovskaya, O. G.; Chetverushkin, B. N.

    2016-06-01

    A new technique for simulating three-dimensional radiative energy transfer for the use in the software designed for the predictive simulation of plasma with high energy density on parallel computers is proposed. A highly scalable algorithm that takes into account the angular dependence of the radiation intensity and is free of the ray effect is developed based on the solution of a second-order equation with a self-adjoint operator. A distinctive feature of this algorithm is a preliminary transformation of rotation to eliminate mixed derivatives with respect to the spatial variables, simplify the structure of the difference operator, and accelerate the convergence of the iterative solution of the equation. It is shown that the proposed method correctly reproduces the limiting cases—isotropic radiation and the directed radiation with a δ-shaped angular distribution.

  15. Investigation of Solar Hybrid Electric/Thermal System with Radiation Concentrator and Thermoelectric Generator

    OpenAIRE

    Edgar Arturo Chávez Urbiola; Yuri Vorobiev

    2013-01-01

    An experimental study of a solar-concentrating system based on thermoelectric generators (TEGs) was performed. The system included an electrical generating unit with 6 serially connected TEGs using a traditional semiconductor material, Bi2Te3, which was illuminated by concentrated solar radiation on one side and cooled by running water on the other side. A sun-tracking concentrator with a mosaic set of mirrors was used; its orientation towards the sun was achieved with two pairs of radiation ...

  16. A fast tree-based method for estimating column densities in Adaptive Mesh Refinement codes Influence of UV radiation field on the structure of molecular clouds

    CERN Document Server

    Valdivia, Valeska

    2014-01-01

    Context. Ultraviolet radiation plays a crucial role in molecular clouds. Radiation and matter are tightly coupled and their interplay influences the physical and chemical properties of gas. In particular, modeling the radiation propagation requires calculating column densities, which can be numerically expensive in high-resolution multidimensional simulations. Aims. Developing fast methods for estimating column densities is mandatory if we are interested in the dynamical influence of the radiative transfer. In particular, we focus on the effect of the UV screening on the dynamics and on the statistical properties of molecular clouds. Methods. We have developed a tree-based method for a fast estimate of column densities, implemented in the adaptive mesh refinement code RAMSES. We performed numerical simulations using this method in order to analyze the influence of the screening on the clump formation. Results. We find that the accuracy for the extinction of the tree-based method is better than 10%, while the ...

  17. A hybrid path-oriented code assignment CDMA-based MAC protocol for underwater acoustic sensor networks.

    Science.gov (United States)

    Chen, Huifang; Fan, Guangyu; Xie, Lei; Cui, Jun-Hong

    2013-11-04

    Due to the characteristics of underwater acoustic channel, media access control (MAC) protocols designed for underwater acoustic sensor networks (UWASNs) are quite different from those for terrestrial wireless sensor networks. Moreover, in a sink-oriented network with event information generation in a sensor field and message forwarding to the sink hop-by-hop, the sensors near the sink have to transmit more packets than those far from the sink, and then a funneling effect occurs, which leads to packet congestion, collisions and losses, especially in UWASNs with long propagation delays. An improved CDMA-based MAC protocol, named path-oriented code assignment (POCA) CDMA MAC (POCA-CDMA-MAC), is proposed for UWASNs in this paper. In the proposed MAC protocol, both the round-robin method and CDMA technology are adopted to make the sink receive packets from multiple paths simultaneously. Since the number of paths for information gathering is much less than that of nodes, the length of the spreading code used in the POCA-CDMA-MAC protocol is shorter greatly than that used in the CDMA-based protocols with transmitter-oriented code assignment (TOCA) or receiver-oriented code assignment (ROCA). Simulation results show that the proposed POCA-CDMA-MAC protocol achieves a higher network throughput and a lower end-to-end delay compared to other CDMA-based MAC protocols.

  18. Learning Concepts, Language, and Literacy in Hybrid Linguistic Codes: The Multilingual Maze of Urban Grade 1 Classrooms in South Africa

    Science.gov (United States)

    Henning, Elizabeth

    2012-01-01

    From the field of developmental psycholinguistics and from conceptual development theory there is evidence that excessive linguistic "code-switching" in early school education may pose some hazards for the learning of young multilingual children. In this article the author addresses the issue, invoking post-Piagetian and neo-Vygotskian…

  19. A Hybrid Path-Oriented Code Assignment CDMA-Based MAC Protocol for Underwater Acoustic Sensor Networks

    Directory of Open Access Journals (Sweden)

    Huifang Chen

    2013-11-01

    Full Text Available Due to the characteristics of underwater acoustic channel, media access control (MAC protocols designed for underwater acoustic sensor networks (UWASNs are quite different from those for terrestrial wireless sensor networks. Moreover, in a sink-oriented network with event information generation in a sensor field and message forwarding to the sink hop-by-hop, the sensors near the sink have to transmit more packets than those far from the sink, and then a funneling effect occurs, which leads to packet congestion, collisions and losses, especially in UWASNs with long propagation delays. An improved CDMA-based MAC protocol, named path-oriented code assignment (POCA CDMA MAC (POCA-CDMA-MAC, is proposed for UWASNs in this paper. In the proposed MAC protocol, both the round-robin method and CDMA technology are adopted to make the sink receive packets from multiple paths simultaneously. Since the number of paths for information gathering is much less than that of nodes, the length of the spreading code used in the POCA-CDMA-MAC protocol is shorter greatly than that used in the CDMA-based protocols with transmitter-oriented code assignment (TOCA or receiver-oriented code assignment (ROCA. Simulation results show that the proposed POCA-CDMA-MAC protocol achieves a higher network throughput and a lower end-to-end delay compared to other CDMA-based MAC protocols.

  20. Studies of acute and chronic radiation injury at the Biological and Medical Research Division, Argonne National Laboratory, 1953-1970: Description of individual studies, data files, codes, and summaries of significant findings

    Energy Technology Data Exchange (ETDEWEB)

    Grahn, D.; Fox, C.; Wright, B.J.; Carnes, B.A.

    1994-05-01

    Between 1953 and 1970, studies on the long-term effects of external x-ray and {gamma} irradiation on inbred and hybrid mouse stocks were carried out at the Biological and Medical Research Division, Argonne National Laboratory. The results of these studies, plus the mating, litter, and pre-experimental stock records, were routinely coded on IBM cards for statistical analysis and record maintenance. Also retained were the survival data from studies performed in the period 1943-1953 at the National Cancer Institute, National Institutes of Health, Bethesda, Maryland. The card-image data files have been corrected where necessary and refiled on hard disks for long-term storage and ease of accessibility. In this report, the individual studies and data files are described, and pertinent factors regarding caging, husbandry, radiation procedures, choice of animals, and other logistical details are summarized. Some of the findings are also presented. Descriptions of the different mouse stocks and hybrids are included in an appendix; more than three dozen stocks were involved in these studies. Two other appendices detail the data files in their original card-image format and the numerical codes used to describe the animal`s exit from an experiment and, for some studies, any associated pathologic findings. Tabular summaries of sample sizes, dose levels, and other variables are also given to assist investigators in their selection of data for analysis. The archive is open to any investigator with legitimate interests and a willingness to collaborate and acknowledge the source of the data and to recognize appropriate conditions or caveats.

  1. Analysis on the Radiation Property of the Bounded Modes of Periodic Leaky-Wave Structure with Finite-Length Using a Hybrid Method.

    Science.gov (United States)

    Li, Zheng; Wang, Junhong; Duan, Jianjie; Zhang, Zhan; Chen, Meie

    2016-03-18

    In this paper the radiation property of the one-dimensional periodic leaky-wave structure is analysed using a new hybrid method, which involves the mode expansion method for expanding the periodic aperture field in terms of spatial harmonics and the method of effective radiation sections for transforming the expanded fields into far fields. Using this method, the radiation of each spatial harmonic can be achieved, and the contributions of the harmonics (especially the bounded modes) to the total radiation of the periodic leaky-wave structure can be calculated. The main findings in this paper demonstrate that the bounded modes in a finite length structure have obvious contribution to the far-field radiation, which was considered to be non-radiative and always ignored in the conventional researches.

  2. Graphene-Multiwalled Carbon Nanotube Hybrids Synthesized by Gamma Radiations: Application as a Glucose Sensor

    Directory of Open Access Journals (Sweden)

    Leila Shahriary

    2014-01-01

    Full Text Available Three-dimensional hybrid nanomaterial of graphene-multiwalled carbon nanotubes (G-MWCNTs was synthesized using gamma rays emitted by a 60Co source with a dose rate of 3.95 Gy min−1. The products were characterized by fourier transform infrared (FTIR, ultraviolet-visible (UV-Vis, photoluminescence (PL, and micro-Raman spectroscopy, X-ray diffraction analysis (XRD, scanning electron microscopy (SEM, and transmission electron microscopy (TEM. FTIR and UV-Vis analysis reveals the formation of hybrid nanomaterial which is confirmed by XRD, micro-Raman analysis, and PL. SEM micrograph depicts the composite structure of graphene layers and MWCNTs, while the TEM micrograph exhibits graphene layers covered by MWCNTs. The G-MWCNTs hybrid used as electrode for electrochemical studies in K3Fe(CN6 shows enhancement in electrocatalytic behavior, compared to each individual starting material, therefore, has been applied for amperometric sensing of glucose in alkaline solution and exhibits sensitivity of 12.5 μAmM-1 cm−2 and low detection limit 1.45 μM (S/N=3 in a linear range of 0.1 to 14 mM (R2=0.985.

  3. Fast-forward genetics by radiation hybrids to saturate the locus regulating nuclear-cytoplasmic compatibility in Triticum.

    Science.gov (United States)

    Bassi, Filippo M; Ghavami, Farhad; Hayden, Matthew J; Wang, Yi; Forrest, Kerrie L; Kong, Stephan; Dizon, Rhoderissa; Michalak de Jimenez, Monika K; Meinhardt, Steven W; Mergoum, Mohamed; Gu, Yong Q; Kianian, Shahryar F

    2016-08-01

    The nuclear-encoded species cytoplasm specific (scs) genes control nuclear-cytoplasmic compatibility in wheat (genus Triticum). Alloplasmic cells, which have nucleus and cytoplasm derived from different species, produce vigorous and vital organisms only when the correct version of scs is present in their nucleus. In this study, bulks of in vivo radiation hybrids segregating for the scs phenotype have been genotyped by sequencing with over 1.9 million markers. The high marker saturation obtained for a critical region of chromosome 1D allowed identification of 3318 reads that mapped in close proximity of the scs. A novel in silico approach was deployed to extend these short reads to sequences of up to 70 Kb in length and identify candidate open reading frames (ORFs). Markers were developed to anchor the short contigs containing ORFs to a radiation hybrid map of 650 individuals with resolution of 288 Kb. The region containing the scs locus was narrowed to a single Bacterial Artificial Chromosome (BAC) contig of Aegilops tauschii. Its sequencing and assembly by nano-mapping allowed rapid identification of a rhomboid gene as the only ORF existing within the refined scs locus. Resequencing of this gene from multiple germplasm sources identified a single nucleotide mutation, which gives rise to a functional amino acid change. Gene expression characterization revealed that an active copy of this rhomboid exists on all homoeologous chromosomes of wheat, and depending on the specific cytoplasm each copy is preferentially expressed. Therefore, a new methodology was applied to unique genetic stocks to rapidly identify a strong candidate gene for the control of nuclear-cytoplasmic compatibility in wheat.

  4. Cooling systems and hybrid A/C systems using an electromagnetic radiation-absorbing complex

    Energy Technology Data Exchange (ETDEWEB)

    Halas, Nancy J.; Nordlander, Peter; Neumann, Oara

    2015-05-19

    A method for powering a cooling unit. The method including applying electromagnetic (EM) radiation to a complex, where the complex absorbs the EM radiation to generate heat, transforming, using the heat generated by the complex, a fluid to vapor, and sending the vapor from the vessel to a turbine coupled to a generator by a shaft, where the vapor causes the turbine to rotate, which turns the shaft and causes the generator to generate the electric power, wherein the electric powers supplements the power needed to power the cooling unit

  5. A Study on the Application of CRUDTRAN Code in Primary Systems of Domestic Pressurized Heavy-Water Reactors for Prediction of Radiation Source Term

    Directory of Open Access Journals (Sweden)

    Jong Soon Song

    2017-04-01

    Full Text Available The importance of developing a source-term assessment technology has been emphasized owing to the decommissioning of Kori nuclear power plant (NPP Unit 1 and the increase of deteriorated NPPs. We analyzed the behavioral mechanism of corrosion products in the primary system of a pressurized heavy-water reactor-type NPP. In addition, to check the possibility of applying the CRUDTRAN code to a Canadian Deuterium Uranium Reactor (CANDU-type NPP, the type was assessed using collected domestic onsite data. With the assessment results, it was possible to predict trends according to operating cycles. Values estimated using the code were similar to the measured values. The results of this study are expected to be used to manage the radiation exposures of operators in high-radiation areas and to predict decommissioning processes in the primary system.

  6. A study on the application of CRUDTRAN code in primary systems of domestic pressurized heavy-water reactors for prediction of radiation source term

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jong Soon; Cho, Hoon Jo; Jung, Min Young; Lee, Sang Heon [Dept. of Nuclear Engineering, Chosun University, Gwangju (Korea, Republic of)

    2017-04-15

    The importance of developing a source-term assessment technology has been emphasized owing to the decommissioning of Kori nuclear power plant (NPP) Unit 1 and the increase of deteriorated NPPs. We analyzed the behavioral mechanism of corrosion products in the primary system of a pressurized heavy-water reactor-type NPP. In addition, to check the possibility of applying the CRUDTRAN code to a Canadian Deuterium Uranium Reactor (CANDU)-type NPP, the type was assessed using collected domestic onsite data. With the assessment results, it was possible to predict trends according to operating cycles. Values estimated using the code were similar to the measured values. The results of this study are expected to be used to manage the radiation exposures of operators in high-radiation areas and to predict decommissioning processes in the primary system.

  7. Optimization of high-definition video coding and hybrid fiber-wireless transmission in the 60 GHz band.

    Science.gov (United States)

    Lebedev, Alexander; Pham, Tien Thang; Beltrán, Marta; Yu, Xianbin; Ukhanova, Anna; Llorente, Roberto; Monroy, Idelfonso Tafur; Forchhammer, Søren

    2011-12-12

    The paper addresses the problem of distribution of high-definition video over fiber-wireless networks. The physical layer architecture with the low complexity envelope detection solution is investigated. We present both experimental studies and simulation of high quality high-definition compressed video transmission over 60 GHz fiber-wireless link. Using advanced video coding we satisfy low complexity and low delay constraints, meanwhile preserving the superb video quality after significantly extended wireless distance.

  8. Optimization of high-definition video coding and hybrid fiber-wireless transmission in the 60 GHz band

    DEFF Research Database (Denmark)

    Lebedev, Alexander; Pham, Tien Thang; Beltrán, Marta;

    2011-01-01

    The paper addresses the problem of distribution of highdefinition video over fiber-wireless networks. The physical layer architecture with the low complexity envelope detection solution is investigated. We present both experimental studies and simulation of high quality high-definition compressed...... video transmission over 60 GHz fiberwireless link. Using advanced video coding we satisfy low complexity and low delay constraints, meanwhile preserving the superb video quality after significantly extended wireless distance. © 2011 Optical Society of America....

  9. Radiation hybrid maps of D-genome of Aegilops tauschii and their application in sequence assembly of large and complex plant genomes

    Science.gov (United States)

    The large and complex genome of bread wheat (Triticum aestivum L., ~17 Gb) requires high-resolution genome maps saturated with ordered markers to assist in anchoring and orienting BAC contigs/ sequence scaffolds for whole genome sequence assembly. Radiation hybrid (RH) mapping has proven to be an e...

  10. Extension of radiative transfer code MOMO, matrix-operator model to the thermal infrared - Clear air validation by comparison to RTTOV and application to CALIPSO-IIR

    Science.gov (United States)

    Doppler, Lionel; Carbajal-Henken, Cintia; Pelon, Jacques; Ravetta, François; Fischer, Jürgen

    2014-09-01

    1-D radiative transfer code Matrix-Operator Model (MOMO), has been extended from [0.2-3.65 μm] the band to the whole [0.2-100 μm] spectrum. MOMO can now be used for the computation of a full range of radiation budgets (shortwave and longwave). This extension to the longwave part of the electromagnetic radiation required to consider radiative transfer processes that are features of the thermal infrared: the spectroscopy of the water vapor self- and foreign-continuum of absorption at 12 μm and the emission of radiation by gases, aerosol, clouds and surface. MOMO's spectroscopy module, Coefficient of Gas Absorption (CGASA), has been developed for computation of gas extinction coefficients, considering continua and spectral line absorptions. The spectral dependences of gas emission/absorption coefficients and of Planck's function are treated using a k-distribution. The emission of radiation is implemented in the adding-doubling process of the matrix operator method using Schwarzschild's approach in the radiative transfer equation (a pure absorbing/emitting medium, namely without scattering). Within the layer, the Planck-function is assumed to have an exponential dependence on the optical-depth. In this paper, validation tests are presented for clear air case studies: comparisons to the analytical solution of a monochromatic Schwarzschild's case without scattering show an error of less than 0.07% for a realistic atmosphere with an optical depth and a blackbody temperature that decrease linearly with altitude. Comparisons to radiative transfer code RTTOV are presented for simulations of top of atmosphere brightness temperature for channels of the space-borne instrument MODIS. Results show an agreement varying from 0.1 K to less than 1 K depending on the channel. Finally MOMO results are compared to CALIPSO Infrared Imager Radiometer (IIR) measurements for clear air cases. A good agreement was found between computed and observed radiance: biases are smaller than 0.5 K

  11. Assessment of shielding analysis methods, codes, and data for spent fuel transport/storage applications. [Radiation dose rates from shielded spent fuels and high-level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Parks, C.V.; Broadhead, B.L.; Hermann, O.W.; Tang, J.S.; Cramer, S.N.; Gauthey, J.C.; Kirk, B.L.; Roussin, R.W.

    1988-07-01

    This report provides a preliminary assessment of the computational tools and existing methods used to obtain radiation dose rates from shielded spent nuclear fuel and high-level radioactive waste (HLW). Particular emphasis is placed on analysis tools and techniques applicable to facilities/equipment designed for the transport or storage of spent nuclear fuel or HLW. Applications to cask transport, storage, and facility handling are considered. The report reviews the analytic techniques for generating appropriate radiation sources, evaluating the radiation transport through the shield, and calculating the dose at a desired point or surface exterior to the shield. Discrete ordinates, Monte Carlo, and point kernel methods for evaluating radiation transport are reviewed, along with existing codes and data that utilize these methods. A literature survey was employed to select a cadre of codes and data libraries to be reviewed. The selection process was based on specific criteria presented in the report. Separate summaries were written for several codes (or family of codes) that provided information on the method of solution, limitations and advantages, availability, data access, ease of use, and known accuracy. For each data library, the summary covers the source of the data, applicability of these data, and known verification efforts. Finally, the report discusses the overall status of spent fuel shielding analysis techniques and attempts to illustrate areas where inaccuracy and/or uncertainty exist. The report notes the advantages and limitations of several analysis procedures and illustrates the importance of using adequate cross-section data sets. Additional work is recommended to enable final selection/validation of analysis tools that will best meet the US Department of Energy's requirements for use in developing a viable HLW management system. 188 refs., 16 figs., 27 tabs.

  12. Hybridization Capture-Based Next-Generation Sequencing to Evaluate Coding Sequence and Deep Intronic Mutations in the NF1 Gene.

    Science.gov (United States)

    Cunha, Karin Soares; Oliveira, Nathalia Silva; Fausto, Anna Karoline; de Souza, Carolina Cruz; Gros, Audrey; Bandres, Thomas; Idrissi, Yamina; Merlio, Jean-Philippe; de Moura Neto, Rodrigo Soares; Silva, Rosane; Geller, Mauro; Cappellen, David

    2016-12-17

    Neurofibromatosis 1 (NF1) is one of the most common genetic disorders and is caused by mutations in the NF1 gene. NF1 gene mutational analysis presents a considerable challenge because of its large size, existence of highly homologous pseudogenes located throughout the human genome, absence of mutational hotspots, and diversity of mutations types, including deep intronic splicing mutations. We aimed to evaluate the use of hybridization capture-based next-generation sequencing to screen coding and noncoding NF1 regions. Hybridization capture-based next-generation sequencing, with genomic DNA as starting material, was used to sequence the whole NF1 gene (exons and introns) from 11 unrelated individuals and 1 relative, who all had NF1. All of them met the NF1 clinical diagnostic criteria. We showed a mutation detection rate of 91% (10 out of 11). We identified eight recurrent and two novel mutations, which were all confirmed by Sanger methodology. In the Sanger sequencing confirmation, we also included another three relatives with NF1. Splicing alterations accounted for 50% of the mutations. One of them was caused by a deep intronic mutation (c.1260 + 1604A > G). Frameshift truncation and missense mutations corresponded to 30% and 20% of the pathogenic variants, respectively. In conclusion, we show the use of a simple and fast approach to screen, at once, the entire NF1 gene (exons and introns) for different types of pathogenic variations, including the deep intronic splicing mutations.

  13. Hybridization Capture-Based Next-Generation Sequencing to Evaluate Coding Sequence and Deep Intronic Mutations in the NF1 Gene

    Science.gov (United States)

    Cunha, Karin Soares; Oliveira, Nathalia Silva; Fausto, Anna Karoline; de Souza, Carolina Cruz; Gros, Audrey; Bandres, Thomas; Idrissi, Yamina; Merlio, Jean-Philippe; de Moura Neto, Rodrigo Soares; Silva, Rosane; Geller, Mauro; Cappellen, David

    2016-01-01

    Neurofibromatosis 1 (NF1) is one of the most common genetic disorders and is caused by mutations in the NF1 gene. NF1 gene mutational analysis presents a considerable challenge because of its large size, existence of highly homologous pseudogenes located throughout the human genome, absence of mutational hotspots, and diversity of mutations types, including deep intronic splicing mutations. We aimed to evaluate the use of hybridization capture-based next-generation sequencing to screen coding and noncoding NF1 regions. Hybridization capture-based next-generation sequencing, with genomic DNA as starting material, was used to sequence the whole NF1 gene (exons and introns) from 11 unrelated individuals and 1 relative, who all had NF1. All of them met the NF1 clinical diagnostic criteria. We showed a mutation detection rate of 91% (10 out of 11). We identified eight recurrent and two novel mutations, which were all confirmed by Sanger methodology. In the Sanger sequencing confirmation, we also included another three relatives with NF1. Splicing alterations accounted for 50% of the mutations. One of them was caused by a deep intronic mutation (c.1260 + 1604A > G). Frameshift truncation and missense mutations corresponded to 30% and 20% of the pathogenic variants, respectively. In conclusion, we show the use of a simple and fast approach to screen, at once, the entire NF1 gene (exons and introns) for different types of pathogenic variations, including the deep intronic splicing mutations. PMID:27999334

  14. Hybridization Capture-Based Next-Generation Sequencing to Evaluate Coding Sequence and Deep Intronic Mutations in the NF1 Gene

    Directory of Open Access Journals (Sweden)

    Karin Soares Cunha

    2016-12-01

    Full Text Available Neurofibromatosis 1 (NF1 is one of the most common genetic disorders and is caused by mutations in the NF1 gene. NF1 gene mutational analysis presents a considerable challenge because of its large size, existence of highly homologous pseudogenes located throughout the human genome, absence of mutational hotspots, and diversity of mutations types, including deep intronic splicing mutations. We aimed to evaluate the use of hybridization capture-based next-generation sequencing to screen coding and noncoding NF1 regions. Hybridization capture-based next-generation sequencing, with genomic DNA as starting material, was used to sequence the whole NF1 gene (exons and introns from 11 unrelated individuals and 1 relative, who all had NF1. All of them met the NF1 clinical diagnostic criteria. We showed a mutation detection rate of 91% (10 out of 11. We identified eight recurrent and two novel mutations, which were all confirmed by Sanger methodology. In the Sanger sequencing confirmation, we also included another three relatives with NF1. Splicing alterations accounted for 50% of the mutations. One of them was caused by a deep intronic mutation (c.1260 + 1604A > G. Frameshift truncation and missense mutations corresponded to 30% and 20% of the pathogenic variants, respectively. In conclusion, we show the use of a simple and fast approach to screen, at once, the entire NF1 gene (exons and introns for different types of pathogenic variations, including the deep intronic splicing mutations.

  15. A sandwich-hybridization assay for simultaneous determination of HIV and tuberculosis DNA targets based on signal amplification by quantum dots-PowerVision™ polymer coding nanotracers.

    Science.gov (United States)

    Yan, Zhongdan; Gan, Ning; Zhang, Huairong; Wang, De; Qiao, Li; Cao, Yuting; Li, Tianhua; Hu, Futao

    2015-09-15

    A novel sandwich-hybridization assay for simultaneous electrochemical detection of multiple DNA targets related to human immune deficiency virus (HIV) and tuberculosis (TB) was developed based on the different quantum dots-PowerVision(TM) polymer nanotracers. The polymer nanotracers were respectively fabricated by immobilizing SH-labeled oligonucleotides (s-HIV or s-TB), which can partially hybrid with virus DNA (HIV or TB), on gold nanoparticles (Au NPs) and then modified with PowerVision(TM) (PV) polymer-encapsulated quantum dots (CdS or PbS) as signal tags. PV is a dendrimer enzyme linked polymer, which can immobilize abundant QDs to amplify the stripping voltammetry signals from the metal ions (Pb or Cd). The capture probes were prepared through the immobilization of SH-labeled oligonucleotides, which can complementary with HIV and TB DNA, on the magnetic Fe3O4@Au (GMPs) beads. After sandwich-hybridization, the polymer nanotracers together with HIV and TB DNA targets were simultaneously introduced onto the surface of GMPs. Then the two encoding metal ions (Cd(2+) and Pb(2+)) were used to differentiate two viruses DNA due to the different subsequent anodic stripping voltammetric peaks at -0.84 V (Cd) and -0.61 V (Pb). Because of the excellent signal amplification of the polymer nanotracers and the great specificity of DNA targets, this assay could detect targets DNA as low as 0.2 femtomolar and exhibited excellent selectivity with the dynamitic range from 0.5 fM to 500 pM. Those results demonstrated that this electrochemical coding assay has great potential in applications for screening more viruses DNA while changing the probes.

  16. Hybrid Registration of Prostate and Seminal Vesicles for Image Guided Radiation Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Boer, Johan de; Herk, Marcel van; Pos, Floris J. [Department of Radiation Oncology, The Netherlands Cancer Institute - Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands); Sonke, Jan-Jakob, E-mail: j.sonke@nki.nl [Department of Radiation Oncology, The Netherlands Cancer Institute - Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands)

    2013-05-01

    Purpose: Fiducial markers are a good surrogate for the prostate but provide little information on the position and orientation of the seminal vesicles (SVs). Therefore, a more advanced localization method is warranted if the SVs are part of the target volume. The purpose of this study was to develop a hybrid registration technique for the localization of the prostate and SVs. Methods and Materials: Twenty prostate patients implanted with 2 or 3 elongated fiducial markers had cone beam computed tomography (CBCT) scans acquired at every fraction. The first step of the hybrid registration was to localize the prostate by CBCT-to-planning-CT alignment of the fiducial markers, allowing both translations and rotations. Using this marker registration as a starting point, the SVs were registered based on gray values, allowing only rotations around the lateral axis. We analyzed the differential rotation between the prostate and SVs and compared the required SV margins for 3 correction strategies. Results: The SV registration had a precision of 2.7° (1 standard deviation) and was successful for 96% of the scans. Mean (M), systematic (Σ), and random (σ) differences between the orientation of the prostate and SV were M = −0.4°, Σ = 7.2°, and σ = 6.4°. Daily marker-based corrections required an SV margin of 11.4 mm (translations only) and 11.6 mm (translations + rotations). Rotation corrections of the SVs reduced the required margin to 8.2 mm. Conclusions: We found substantial differences between the orientation of the prostate and SVs. The hybrid registration technique can accurately detect these rotations during treatment. Rotation correction of the SVs allows for margin reduction for the SVs.

  17. Hybrid breeding in pepper (capsicum annuum L. ). [Gamma and x radiation

    Energy Technology Data Exchange (ETDEWEB)

    Milkova, L.; Daskalov, S. (Akademiya na Selskostopanskite Nauki, Sofia (Bulgaria). Inst. po Genetika)

    1981-01-01

    Male sterile forms of peppers with gene sterility were produced by ..gamma..- and X-irradiation of dry seeds of cv. Pazarjishka kapiya 794 and Zlaten medal and subsequent selection in M/sub 2/. Male sterile lines suitable for developing hybrid cultivars intended for various kinds of production were obtained by backcrossing with lines and cultivars having valuable economic characters and high combining ability. The promising pepper Belasitsa, Prista, Lyulin and Strouma (all of them for early field production), and Izoumroud and Prevuzhoden (for glasshouse production) are described.

  18. Radiation Transport for Explosive Outflows: A Multigroup Hybrid Monte Carlo Method

    CERN Document Server

    Wollaeger, Ryan T; Graziani, Carlo; Couch, Sean M; Jordan, George C; Lamb, Donald Q; Moses, Gregory A

    2013-01-01

    We explore the application of Implicit Monte Carlo (IMC) and Discrete Diffusion Monte Carlo (DDMC) to radiation transport in strong fluid outflows with structured opacity. The IMC method of Fleck & Cummings is a stochastic computational technique for nonlinear radiation transport. IMC is partially implicit in time and may suffer in efficiency when tracking Monte Carlo particles through optically thick materials. The DDMC method of Densmore accelerates an IMC computation where the domain is diffusive. Recently, Abdikamalov extended IMC and DDMC to multigroup, velocity-dependent neutrino transport with the intent of modeling neutrino dynamics in core-collapse supernovae. Densmore has also formulated a multifrequency extension to the originally grey DDMC method. In this article we rigorously formulate IMC and DDMC over a high-velocity Lagrangian grid for possible application to photon transport in the post-explosion phase of Type Ia supernovae. The method described is suitable for a large variety of non-mono...

  19. Towards the optimization of a gyrokinetic Particle-In-Cell (PIC) code on large-scale hybrid architectures

    Science.gov (United States)

    Ohana, N.; Jocksch, A.; Lanti, E.; Tran, T. M.; Brunner, S.; Gheller, C.; Hariri, F.; Villard, L.

    2016-11-01

    With the aim of enabling state-of-the-art gyrokinetic PIC codes to benefit from the performance of recent multithreaded devices, we developed an application from a platform called the “PIC-engine” [1, 2, 3] embedding simplified basic features of the PIC method. The application solves the gyrokinetic equations in a sheared plasma slab using B-spline finite elements up to fourth order to represent the self-consistent electrostatic field. Preliminary studies of the so-called Particle-In-Fourier (PIF) approach, which uses Fourier modes as basis functions in the periodic dimensions of the system instead of the real-space grid, show that this method can be faster than PIC for simulations with a small number of Fourier modes. Similarly to the PIC-engine, multiple levels of parallelism have been implemented using MPI+OpenMP [2] and MPI+OpenACC [1], the latter exploiting the computational power of GPUs without requiring complete code rewriting. It is shown that sorting particles [3] can lead to performance improvement by increasing data locality and vectorizing grid memory access. Weak scalability tests have been successfully run on the GPU-equipped Cray XC30 Piz Daint (at CSCS) up to 4,096 nodes. The reduced time-to-solution will enable more realistic and thus more computationally intensive simulations of turbulent transport in magnetic fusion devices.

  20. Radiation-Resistant Hybrid Lotus Effect for Achieving Photoelectrocatalytic Self-Cleaning Anticontamination Coatings

    Science.gov (United States)

    Taylor, Edward W.; Pirich, Ronald G.

    2011-01-01

    An experiment involving radiation-resistant hydrophobic coatings is planned for space exposure and experimental testing on the International Space Station (ISS) in 2011. The Lotus biocide coatings are designed for supporting space exploration missions. This innovation is an antibacterial, anti-contamination, and self-cleaning coating that uses nano-sized semiconductor semimetal oxides to neutralize biological pathogens and toxic chemicals, as well as to mitigate dust accumulation (see figure). The Lotus biocide coating is thin (approximately microns thick), lightweight, and the biocide properties will not degrade with time or exposure to biological or chemical agents. The biocide is stimulated chemically (stoichiometric reaction) through exposure to light (photocatalysis), or by an applied electric field (electrocatalysis). The hydrophobic coating samples underwent preliminary high-energy proton and alpha-ray (helium ion) irradiations at the Lawrence Berkeley National Laboratory 88" cyclotron and demonstrated excellent radiation resistance for a portion of the Galactic Cosmic Ray (GRC) and Solar Proton spectrum. The samples will undergo additional post-flight studies when returned to Earth to affirm further the radiation resistance properties of the space exposed coatings.

  1. 采用分布式编码的协作HARQ协议%Collaborative hybrid-ARQ protocol with distributed code

    Institute of Scientific and Technical Information of China (English)

    吴熹; 龙华; 唐嘉麒; 彭永杰

    2015-01-01

    In order to improve the reliability of the cooperative communication system, a new HARQ protocol is pro-posed by combining the distributed code with the averaged diversity combining technology. The collaborative hybrid repeat request system is constructed by distributed Turbo code. In the destination terminal, the retransmission of relay is processed by incremental redundancy technology, and the Chase combining technology is used to process the source infor-mation. Joint soft decision decoding is adopted at the destination terminal. The outage probability and average throughput are deduced. Compared with non-collaborative HARQ protocols, the collaborative HARQ protocol with distributed code can achieve better performance on flat Rayleigh fading channel.%为提高协作通信系统的可靠性,将分布式编码和码合并技术相结合,提出了一种新的混合自动重传协议,构造了基于分布式Turbo码的协作重传系统模型。目的终端分别采用递增冗余和Chase合并技术处理中继节点和信源的重发信息,并进行联合软判决译码。分析了系统的中断概率和平均吞吐量。仿真结果表明,在平坦瑞利衰落信道下,该分布式编码协作HARQ协议较非协作HARQ协议可获得较大的性能改善。

  2. RH 1.5D: a massively parallel code for multi-level radiative transfer with partial frequency redistribution and Zeeman polarisation

    CERN Document Server

    Pereira, Tiago M D

    2014-01-01

    The emergence of three-dimensional magneto-hydrodynamic (MHD) simulations of stellar atmospheres has sparked a need for efficient radiative transfer codes to calculate detailed synthetic spectra. We present RH 1.5D, a massively parallel code based on the RH code and capable of performing Zeeman polarised multi-level non-local thermodynamical equilibrium (NLTE) calculations with partial frequency redistribution for an arbitrary amount of chemical species. The code calculates spectra from 3D, 2D or 1D atmospheric models on a column-by-column basis (or 1.5D). While the 1.5D approximation breaks down in the cores of very strong lines in an inhomogeneous environment, it is nevertheless suitable for a large range of scenarios and allows for faster convergence with finer control over the iteration of each simulation column. The code scales well to at least tens of thousands of CPU cores, and is publicly available. In the present work we briefly describe its inner workings, strategies for convergence optimisation, it...

  3. RH 1.5D: a massively parallel code for multi-level radiative transfer with partial frequency redistribution and Zeeman polarisation

    Science.gov (United States)

    Pereira, Tiago M. D.; Uitenbroek, Han

    2015-02-01

    The emergence of three-dimensional magneto-hydrodynamic simulations of stellar atmospheres has sparked a need for efficient radiative transfer codes to calculate detailed synthetic spectra. We present RH 1.5D, a massively parallel code based on the RH code and capable of performing Zeeman polarised multi-level non-local thermodynamical equilibrium calculations with partial frequency redistribution for an arbitrary amount of chemical species. The code calculates spectra from 3D, 2D or 1D atmospheric models on a column-by-column basis (or 1.5D). While the 1.5D approximation breaks down in the cores of very strong lines in an inhomogeneous environment, it is nevertheless suitable for a large range of scenarios and allows for faster convergence with finer control over the iteration of each simulation column. The code scales well to at least tens of thousands of CPU cores, and is publicly available. In the present work we briefly describe its inner workings, strategies for convergence optimisation, its parallelism, and some possible applications.

  4. TU-G-BRA-08: BEST IN PHYSICS (JOINT IMAGING-THERAPY): Hybrid PET-MRI Imaging of Acute Radiation Induced Cardiac Toxicity

    Energy Technology Data Exchange (ETDEWEB)

    El-Sherif, O; Xhaferllari, I; Gaede, S [Western Univeristy, London, ON (United Kingdom); London Regional Cancer Program, London, ON (United Kingdom); Sykes, J; Butler, J [Lawson Health Research Institute, London, ON (United Kingdom); Wisenberg, G; Prato, F [Western Univeristy, London, ON (United Kingdom); Lawson Health Research Institute, London, ON (United Kingdom)

    2015-06-15

    Purpose: To identify the presence of low-dose radiation induced cardiac toxicity in a canine model using hybrid positron emission tomography (PET) and magnetic resonance imaging (MRI). Methods: Research ethics board approval was obtained for a longitudinal imaging study of 5 canines after cardiac irradiation. Animals were imaged at baseline, 1 week post cardiac irradiation, and 1 month post cardiac irradiation using a hybrid PET- MRI system (Biograph mMR, Siemens Healthcare). The imaging protocol was designed to assess acute changes in myocardial perfusion and inflammation. Myocardial perfusion imaging was performed using N13-ammonia tracer followed by a dynamic PET acquisition scan. A compartmental tracer kinetic model was used for absolute perfusion quantification. Myocardial inflammation imaging was performed using F18-fluorodeoxyglucose (FDG) tracer. The standard uptake value (SUV) over a region encompassing the whole heart was used to compare FDG scans. All animals received a simulation CT scan (GE Medical Systems) for radiation treatment planning. Radiation treatment plans were created using the Pinncale3 treatment planning system (Philips Radiation Oncology Systems) and designed to resemble the typical cardiac exposure during left-sided breast cancer radiotherapy. Cardiac irradiations were performed in a single fraction using a TrueBeam linear accelerator (Varian Medical Systems). Results: The delivered dose (mean ± standard deviation) to heart was 1.8±0.2 Gy. Reductions in myocardial stress perfusion relative to baseline were observed in 2 of the 5 animals 1 month post radiation. A global inflammatory response 1 month post radiation was observed in 4 of the 5 animals. The calculated SUV at 1 month post radiation was significantly higher (p=0.05) than the baseline SUV. Conclusion: Low doses of cardiac irradiation (< 2 Gy) may lead to myocardial perfusion defects and a global inflammatory response that can be detectable as early as 1 month post irradiation

  5. Development of a 144-channel Hybrid Avalanche Photo-Detector for Belle II ring-imaging Cherenkov counter with an aerogel radiator

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, S., E-mail: shohei.nishida@kek.jp [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Adachi, I. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Hamada, N. [Toho University, Funabashi (Japan); Hara, K. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Iijima, T. [Nagoya University, Nagoya (Japan); Iwata, S.; Kakuno, H. [Tokyo Metropolitan University, Hachioji (Japan); Kawai, H. [Chiba University, Chiba (Japan); Korpar, S.; Krizan, P. [Jozef Stefan Institute, Ljubljana (Slovenia); Ogawa, S. [Toho University, Funabashi (Japan); Pestotnik, R.; Ŝantelj, L.; Seljak, A. [Jozef Stefan Institute, Ljubljana (Slovenia); Sumiyoshi, T. [Tokyo Metropolitan University, Hachioji (Japan); Tabata, M. [Chiba University, Chiba (Japan); Tahirovic, E. [Jozef Stefan Institute, Ljubljana (Slovenia); Yoshida, K. [Tokyo Metropolitan University, Hachioji (Japan); Yusa, Y. [Niigata University, Niigata (Japan)

    2015-07-01

    The Belle II detector, a follow up of the very successful Belle experiment, is under construction at the SuperKEKB electron–positron collider at KEK in Japan. For the PID system in the forward region of the spectrometer, a proximity-focusing ring-imaging Cherenkov counter with an aerogel radiator is being developed. For the position sensitive photon sensor, a 144-channel Hybrid Avalanche Photo-Detector has been developed with Hamamatsu Photonics K.K. In this report, we describe the specification of the Hybrid Avalanche Photo-Detector and the status of the mass production.

  6. Radiative Decays of the $X(3872)$ in the Charmonium-Molecule Hybrid Picture

    CERN Document Server

    Takeuchi, Sachiko; Shimizu, Kiyotaka

    2016-01-01

    The X(3872) radiative decay is discussed by employing a two-meson multichannel model with the charmonium components, which explains many of the other observed features of X(3872). We have found that the ratio of the branching fractions of the X(3872) radiative decays, $R_\\gamma =\\text{Br}(X(3872)\\rightarrow\\psi(2S)\\gamma)$ / Br$(X(3872)\\rightarrow J/\\psi\\gamma)$, is 1.1 $\\sim$ 3.4 if one assumes that the decay occurs only from the charmonium components. The invariant mass spectra of $cc^{bar}$($2P$)$\\rightarrow J/\\psi \\gamma$ and $cc^{bar}$($2P$)$\\rightarrow \\psi(2S) \\gamma$ are also investigated. It is found that an enhancement appears at around $E\\sim 3960$ MeV in the $\\psi(2S) \\gamma$ spectrum but not in the $J/\\psi\\gamma$ spectrum. This corresponds to the missing $cc^{bar}$($2P$) pole which was predicted by the quark models but has not been observed due to the coupling to the $DD^{bar}$ states. We argue that the fluctuation seen in the experimental $\\psi(2S) \\gamma$ spectrum reported by LHCb may correspon...

  7. Synthesis and radiation response of BCON: a graphene oxide and hexagonal boron nitride hybrid

    Science.gov (United States)

    Bhimanapati, Ganesh R.; Wetherington, Maxwell; Mahabir, Shawn; Robinson, Joshua A.

    2016-06-01

    Since graphene, there has been a focus on several two-dimensional material systems (e.g. boron nitride, borocarbon nitride (BCN), transition-metal dichalcogenides) that provide an even wider array of unique chemistries and properties to explore future applications. Specifically, tailoring graphene/boron nitride heterostructures—which can theoretically retain the character of a single-atom thick sheet, withstand large physical strains, are easily functionalized, and have entirely different optical and mechanical properties compared to graphene—can provide the foundation for entirely new research avenues. In recent years, it has been shown that because of the similar crystal structure, carbon, boron, and nitrogen can co-exist as atomic sheets in a layered structure. We have developed a facile method of integrating boron nitride (hBN) and graphene oxide (GO) via chemical exfoliation which we refer to as BCON. The study of the stability of this material at different pH conditions indicates a stable and a uniform solution is achievable at pH 4-8. X-Ray Photoelectron Spectroscopy helped to identify the new bonds which indicated the formation of BCON linkage. Further, an in situ XPS technique was used to understand the chemical changes while exposing it to ionization radiation specially focusing on the C/O ratio. It was observed that even with a very low energy source, this material is highly sensitive to ionizing radiation, such as neutron, alpha and beta particles.

  8. F1 hybrids of BALB/c and C57BL/6 mouse strains respond differently to low-dose ionizing radiation exposure

    Indian Academy of Sciences (India)

    Sanjay Mukherjee; K. B. Sainis; Deepti D. Deobagkar

    2014-12-01

    There are evidences to show that response to ionizing radiations have genetic influence. To investigate this further, reciprocal F1 hybrids were genereted by crossbreeding the radiation-susceptible BALB/c mouse strain with resistant C57BL/6 in a sex-specific manner (BALB/c♂×C57BL/6♀ = B6BcF1; C57BL/6♂× BALB/c♀ =BcB6F1). These hybrids were compared with each other and to the parental strains with respect to transcriptional responses to low-dose ionizing radiation exposure (LDIR). The two F1 hybrids showed drastic differences in their gene expression profiles to ionizing radiation exposure particularly in case of the genes involved in DNA damage response and repair process. Also, the inheritance pattern of the gene expression was found to be complex and could not be explained solely on the basis of parental expression pattern. It was concluded that there is a differential transmission of susceptible trait alleles from the parents to F1 progeny which is dependent on the sex of the parent mouse strain used to set up the crosses and other environmental factors.

  9. Whole-body hybrid imaging concept for the integration of PET/MR into radiation therapy treatment planning

    Science.gov (United States)

    Paulus, Daniel H.; Oehmigen, Mark; Grueneisen, Johannes; Umutlu, Lale; Quick, Harald H.

    2016-05-01

    Modern radiation therapy (RT) treatment planning is based on multimodality imaging. With the recent availability of whole-body PET/MR hybrid imaging new opportunities arise to improve target volume delineation in RT treatment planning. This, however, requires dedicated RT equipment for reproducible patient positioning on the PET/MR system, which has to be compatible with MR and PET imaging. A prototype flat RT table overlay, radiofrequency (RF) coil holders for head imaging, and RF body bridges for body imaging were developed and tested towards PET/MR system integration. Attenuation correction (AC) of all individual RT components was performed by generating 3D CT-based template models. A custom-built program for μ-map generation assembles all AC templates depending on the presence and position of each RT component. All RT devices were evaluated in phantom experiments with regards to MR and PET imaging compatibility, attenuation correction, PET quantification, and position accuracy. The entire RT setup was then evaluated in a first PET/MR patient study on five patients at different body regions. All tested devices are PET/MR compatible and do not produce visible artifacts or disturb image quality. The RT components showed a repositioning accuracy of better than 2 mm. Photon attenuation of  -11.8% in the top part of the phantom was observable, which was reduced to  -1.7% with AC using the μ-map generator. Active lesions of 3 subjects were evaluated in terms of SUVmean and an underestimation of  -10.0% and  -2.4% was calculated without and with AC of the RF body bridges, respectively. The new dedicated RT equipment for hybrid PET/MR imaging enables acquisitions in all body regions. It is compatible with PET/MR imaging and all hardware components can be corrected in hardware AC by using the suggested μ-map generator. These developments provide the technical and methodological basis for integration of PET/MR hybrid imaging into RT planning.

  10. A Study of Longwave Radiation Codes for Climate Studies: Validation with ARM Observations and Tests in General Circulation Models

    Energy Technology Data Exchange (ETDEWEB)

    Robert G. Ellingson

    2004-09-28

    One specific goal of the Atmospheric Radiation Measurements (ARM) program is to improve the treatment of radiative transfer in General Circulation Models (GCMs) under clear-sky, general overcast and broken cloud conditions. Our project was geared to contribute to this goal by attacking major problems associated with one of the dominant radiation components of the problem --longwave radiation. The primary long-term project objectives were to: (1) develop an optimum longwave radiation model for use in GCMs that has been calibrated with state-of-the-art observations for clear and cloudy conditions, and (2) determine how the longwave radiative forcing with an improved algorithm contributes relatively in a GCM when compared to shortwave radiative forcing, sensible heating, thermal advection and convection. The approach has been to build upon existing models in an iterative, predictive fashion. We focused on comparing calculations from a set of models with operationally observed data for clear, overcast and broken cloud conditions. The differences found through the comparisons and physical insights have been used to develop new models, most of which have been tested with new data. Our initial GCM studies used existing GCMs to study the climate model-radiation sensitivity problem. Although this portion of our initial plans was curtailed midway through the project, we anticipate that the eventual outcome of this approach will provide both a better longwave radiative forcing algorithm and from our better understanding of how longwave radiative forcing influences the model equilibrium climate, how improvements in climate prediction using this algorithm can be achieved.

  11. Physical mapping resources for large plant genomes: radiation hybrids for wheat D-genome progenitor Aegilops tauschii

    Directory of Open Access Journals (Sweden)

    Kumar Ajay

    2012-11-01

    Full Text Available Abstract Background Development of a high quality reference sequence is a daunting task in crops like wheat with large (~17Gb, highly repetitive (>80% and polyploid genome. To achieve complete sequence assembly of such genomes, development of a high quality physical map is a necessary first step. However, due to the lack of recombination in certain regions of the chromosomes, genetic mapping, which uses recombination frequency to map marker loci, alone is not sufficient to develop high quality marker scaffolds for a sequence ready physical map. Radiation hybrid (RH mapping, which uses radiation induced chromosomal breaks, has proven to be a successful approach for developing marker scaffolds for sequence assembly in animal systems. Here, the development and characterization of a RH panel for the mapping of D-genome of wheat progenitor Aegilops tauschii is reported. Results Radiation dosages of 350 and 450 Gy were optimized for seed irradiation of a synthetic hexaploid (AABBDD wheat with the D-genome of Ae. tauschii accession AL8/78. The surviving plants after irradiation were crossed to durum wheat (AABB, to produce pentaploid RH1s (AABBD, which allows the simultaneous mapping of the whole D-genome. A panel of 1,510 RH1 plants was obtained, of which 592 plants were generated from the mature RH1 seeds, and 918 plants were rescued through embryo culture due to poor germination (1 seeds. This panel showed a homogenous marker loss (2.1% after screening with SSR markers uniformly covering all the D-genome chromosomes. Different marker systems mostly detected different lines with deletions. Using markers covering known distances, the mapping resolution of this RH panel was estimated to be cM/cR ratio of 1:5.2 and 15 distinct bins. Additionally, with this small set of lines, almost all the tested ESTs could be mapped. A set of 399 most informative RH lines with an average deletion frequency of ~10% were identified for developing high density marker

  12. Hybrid polygon and hydrodynamic nebula modeling with multi-waveband radiation transfer in astrophysics

    Science.gov (United States)

    Steffen, W.; Koning, N.

    2017-07-01

    We demonstrate the potential for research and outreach of mixed polygon and hydrodynamic modeling and multi-waveband rendering in the interactive 3-D astrophysical virtual laboratory Shape. In 3-D special effects and animation software for the mass media, computer graphics techniques that mix polygon and numerical hydrodynamics have become common place. In astrophysics, however, interactive modeling with polygon structures has only become available with the software Shape. Numerical hydrodynamic simulations and their visualization are usually separate, while in Shape it is integrated with the polygon modeling approach that requires no programming by the user. With two generic examples, we demonstrate that research and outreach modeling can be achieved with techniques similar to those used in the media industry with the added capability for physical rendering at any wavelength band, yielding more realistic radiation modeling. Furthermore, we show how the hydrodynamics and the polygon mesh modeling can be mixed to achieve results that are superior to those obtained using either one of these modeling techniques alone.

  13. On the Performance Analysis of Hybrid ARQ With Incremental Redundancy and With Code Combining Over Free-Space Optical Channels With Pointing Errors

    KAUST Repository

    Zedini, Emna

    2014-07-16

    In this paper, we investigate the performance of hybrid automatic repeat request (HARQ) with incremental redundancy (IR) and with code combining (CC) from an information-theoretic perspective over a point-to-point free-space optical (FSO) system. First, we introduce new closed-form expressions for the probability density function, the cumulative distribution function, the moment generating function, and the moments of an FSO link modeled by the Gamma fading channel subject to pointing errors and using intensity modulation with direct detection technique at the receiver. Based on these formulas, we derive exact results for the average bit error rate and the capacity in terms of Meijer\\'s G functions. Moreover, we present asymptotic expressions by utilizing the Meijer\\'s G function expansion and using the moments method, too, for the ergodic capacity approximations. Then, we provide novel analytical expressions for the outage probability, the average number of transmissions, and the average transmission rate for HARQ with IR, assuming a maximum number of rounds for the HARQ protocol. Besides, we offer asymptotic expressions for these results in terms of simple elementary functions. Additionally, we compare the performance of HARQ with IR and HARQ with CC. Our analysis demonstrates that HARQ with IR outperforms HARQ with CC.

  14. PORTA: A Three-dimensional Multilevel Radiative Transfer Code for Modeling the Intensity and Polarization of Spectral Lines with Massively Parallel Computers

    CERN Document Server

    Stepan, Jiri

    2013-01-01

    The interpretation of the intensity and polarization of the spectral line radiation produced in the atmosphere of the Sun and of other stars requires solving a radiative transfer problem that can be very complex, especially when the main interest lies in modeling the spectral line polarization produced by scattering processes and the Hanle and Zeeman effects. One of the difficulties is due to the fact that the plasma of a stellar atmosphere can be highly inhomogeneous and dynamic, which implies the need to solve the non-equilibrium problem of the generation and transfer of polarized radiation in realistic three-dimensional (3D) stellar atmospheric models. Here we present PORTA, an efficient multilevel radiative transfer code we have developed for doing simulations of the spectral line polarization caused by scattering processes and the Hanle and Zeeman effects in 3D models of stellar atmospheres. The numerical method of solution is based on the non-linear multigrid iterative method and on a novel short-charac...

  15. Study of the Distribution of Radiative Defects and Reabsorption of the UV in ZnO Nanorods-Organic Hybrid White Light Emitting Diodes (LEDs).

    Science.gov (United States)

    Hussain, Ijaz; Bano, Nargis; Hussain, Sajjad; Soomro, Yousuf; Nur, Omer; Willander, Magnus

    2011-07-08

    In this study, the low temperature aqueous chemical growth (ACG) method was employed to synthesized ZnO nanorods to process-organic hybrid white light emitting diodes (LEDs) on glass substrate. Electroluminescence spectra of the hybrid white LEDs demonstrate the combination of emission bands arising from radiative recombination of the organic and ZnO nanorods (NRs). Depth resolved luminescence was used for probing the nature and spatial distribution of radiative defects, especially to study the re-absorption of ultraviolet (UV) in this hybrid white LEDs structure. At room temperature the cathodoluminescence (CL) spectra intensity of the deep band emission (DBE) is increased with the increase of the electron beam penetration depth due to the increase of defect concentration at the ZnO NRs/Polyfluorene (PFO) interface and probably due to internal absorption of the UV. A strong dependency between the intensity ratio of the UV to the DBE bands and the spatial distribution of the radiative defects in ZnO NRs has been found. The comparison of the CL spectra from the PFO and the ZnO NRs demonstrate that PFO has a very weak violet-blue emission band, which confirms that most of the white emission components originate from the ZnO NRs.

  16. Study of the Distribution of Radiative Defects and Reabsorption of the UV in ZnO Nanorods-Organic Hybrid White Light Emitting Diodes (LEDs

    Directory of Open Access Journals (Sweden)

    Yousuf Soomro

    2011-07-01

    Full Text Available In this study, the low temperature aqueous chemical growth (ACG method was employed to synthesized ZnO nanorods to process-organic hybrid white light emitting diodes (LEDs on glass substrate. Electroluminescence spectra of the hybrid white LEDs demonstrate the combination of emission bands arising from radiative recombination of the organic and ZnO nanorods (NRs. Depth resolved luminescence was used for probing the nature and spatial distribution of radiative defects, especially to study the re-absorption of ultraviolet (UV in this hybrid white LEDs structure. At room temperature the cathodoluminescence (CL spectra intensity of the deep band emission (DBE is increased with the increase of the electron beam penetration depth due to the increase of defect concentration at the ZnO NRs/Polyfluorene (PFO interface and probably due to internal absorption of the UV. A strong dependency between the intensity ratio of the UV to the DBE bands and the spatial distribution of the radiative defects in ZnO NRs has been found. The comparison of the CL spectra from the PFO and the ZnO NRs demonstrate that PFO has a very weak violet-blue emission band, which confirms that most of the white emission components originate from the ZnO NRs.

  17. BGO as a hybrid scintillator / Cherenkov radiator for cost-effective time-of-flight PET

    Science.gov (United States)

    Brunner, S. E.; Schaart, D. R.

    2017-06-01

    Due to detector developments in the last decade, the time-of-flight (TOF) method is now commonly used to improve the quality of positron emission tomography (PET) images. Clinical TOF-PET systems based on L(Y)SO:Ce crystals and silicon photomultipliers (SiPMs) with coincidence resolving times (CRT) between 325 ps and 400 ps FWHM have recently been developed. Before the introduction of L(Y)SO:Ce, BGO was used in many PET systems. In addition to a lower price, BGO offers a superior attenuation coefficient and a higher photoelectric fraction than L(Y)SO:Ce. However, BGO is generally considered an inferior TOF-PET scintillator. In recent years, TOF-PET detectors based on the Cherenkov effect have been proposed. However, the low Cherenkov photon yield in the order of  ˜10 photons per event complicates energy discrimination-a severe disadvantage in clinical PET. The optical characteristics of BGO, in particular its high transparency down to 310 nm and its high refractive index of  ˜2.15, are expected to make it a good Cherenkov radiator. Here, we study the feasibility of combining event timing based on Cherenkov emission with energy discrimination based on scintillation in BGO, as a potential approach towards a cost-effective TOF-PET detector. Rise time measurements were performed using a time-correlated single photon counting (TCSPC) setup implemented on a digital photon counter (DPC) array, revealing a prompt luminescent component likely to be due to Cherenkov emission. Coincidence timing measurements were performed using BGO crystals with a cross-section of 3 mm  ×  3 mm and five different lengths between 3 mm and 20 mm, coupled to DPC arrays. Non-Gaussian coincidence spectra with a FWHM of 200 ps were obtained with the 27 mm3 BGO cubes, while FWHM values as good as 330 ps were achieved with the 20 mm long crystals. The FWHM value was found to improve with decreasing temperature, while the FWTM value showed the opposite trend.

  18. Application of dissociation curve analysis to radiation hybrid panel marker scoring: generation of a map of river buffalo (B. bubalis chromosome 20

    Directory of Open Access Journals (Sweden)

    Schäffer Alejandro A

    2008-11-01

    Full Text Available Abstract Background Fluorescence of dyes bound to double-stranded PCR products has been utilized extensively in various real-time quantitative PCR applications, including post-amplification dissociation curve analysis, or differentiation of amplicon length or sequence composition. Despite the current era of whole-genome sequencing, mapping tools such as radiation hybrid DNA panels remain useful aids for sequence assembly, focused resequencing efforts, and for building physical maps of species that have not yet been sequenced. For placement of specific, individual genes or markers on a map, low-throughput methods remain commonplace. Typically, PCR amplification of DNA from each panel cell line is followed by gel electrophoresis and scoring of each clone for the presence or absence of PCR product. To improve sensitivity and efficiency of radiation hybrid panel analysis in comparison to gel-based methods, we adapted fluorescence-based real-time PCR and dissociation curve analysis for use as a novel scoring method. Results As proof of principle for this dissociation curve method, we generated new maps of river buffalo (Bubalus bubalis chromosome 20 by both dissociation curve analysis and conventional marker scoring. We also obtained sequence data to augment dissociation curve results. Few genes have been previously mapped to buffalo chromosome 20, and sequence detail is limited, so 65 markers were screened from the orthologous chromosome of domestic cattle. Thirty bovine markers (46% were suitable as cross-species markers for dissociation curve analysis in the buffalo radiation hybrid panel under a standard protocol, compared to 25 markers suitable for conventional typing. Computational analysis placed 27 markers on a chromosome map generated by the new method, while the gel-based approach produced only 20 mapped markers. Among 19 markers common to both maps, the marker order on the map was maintained perfectly. Conclusion Dissociation curve

  19. Scaling and performance of a 3-D radiation hydrodynamics code on message-passing parallel computers: final report

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, J C; Norman, M

    1999-10-28

    This report details an investigation into the efficacy of two approaches to solving the radiation diffusion equation within a radiation hydrodynamic simulation. Because leading-edge scientific computing platforms have evolved from large single-node vector processors to parallel aggregates containing tens to thousands of individual CPU's, the ability of an algorithm to maintain high compute efficiency when distributed over a large array of nodes is critically important. The viability of an algorithm thus hinges upon the tripartite question of numerical accuracy, total time to solution, and parallel efficiency.

  20. Development and Implementation of Photonuclear Cross-Section Data for Mutually Coupled Neutron-Photon Transport Calculations in the Monte Carlo N-Particle (MCNP) Radiation Transport Code

    Energy Technology Data Exchange (ETDEWEB)

    White, Morgan C. [Univ. of Florida, Gainesville, FL (United States)

    2000-07-01

    The fundamental motivation for the research presented in this dissertation was the need to development a more accurate prediction method for characterization of mixed radiation fields around medical electron accelerators (MEAs). Specifically, a model is developed for simulation of neutron and other particle production from photonuclear reactions and incorporated in the Monte Carlo N-Particle (MCNP) radiation transport code. This extension of the capability within the MCNP code provides for the more accurate assessment of the mixed radiation fields. The Nuclear Theory and Applications group of the Los Alamos National Laboratory has recently provided first-of-a-kind evaluated photonuclear data for a select group of isotopes. These data provide the reaction probabilities as functions of incident photon energy with angular and energy distribution information for all reaction products. The availability of these data is the cornerstone of the new methodology for state-of-the-art mutually coupled photon-neutron transport simulations. The dissertation includes details of the model development and implementation necessary to use the new photonuclear data within MCNP simulations. A new data format has been developed to include tabular photonuclear data. Data are processed from the Evaluated Nuclear Data Format (ENDF) to the new class ''u'' A Compact ENDF (ACE) format using a standalone processing code. MCNP modifications have been completed to enable Monte Carlo sampling of photonuclear reactions. Note that both neutron and gamma production are included in the present model. The new capability has been subjected to extensive verification and validation (V&V) testing. Verification testing has established the expected basic functionality. Two validation projects were undertaken. First, comparisons were made to benchmark data from literature. These calculations demonstrate the accuracy of the new data and transport routines to better than 25 percent. Second

  1. Hybrid MV-kV 3D respiratory motion tracking during radiation therapy with low imaging dose

    Science.gov (United States)

    Yan, Huagang; Li, Haiyun; Liu, Zhixiang; Nath, Ravinder; Liu, Wu

    2012-12-01

    A novel real-time adaptive MV-kV imaging framework for image-guided radiation therapy is developed to reduce the thoracic and abdominal tumor targeting uncertainty caused by respiration-induced intrafraction motion with ultra-low patient imaging dose. In our method, continuous stereoscopic MV-kV imaging is used at the beginning of a radiation therapy delivery for several seconds to measure the implanted marker positions. After this stereoscopic imaging period, the kV imager is switched off except for the times when no fiducial marker is detected in the cine-MV images. The 3D time-varying marker positions are estimated by combining the MV 2D projection data and the motion correlations between directional components of marker motion established from the stereoscopic imaging period and updated afterwards; in particular, the most likely position is assumed to be the position on the projection line that has the shortest distance to the first principal component line segment constructed from previous trajectory points. An adaptive windowed auto-regressive prediction is utilized to predict the marker position a short time later (310 ms and 460 ms in this study) to allow for tracking system latency. To demonstrate the feasibility and evaluate the accuracy of the proposed method, computer simulations were performed for both arc and fixed-gantry deliveries using 66 h of retrospective tumor motion data from 42 patients treated for thoracic or abdominal cancers. The simulations reveal that using our hybrid approach, a smaller than 1.2 mm or 1.5 mm root-mean-square tracking error can be achieved at a system latency of 310 ms or 460 ms, respectively. Because the kV imaging is only used for a short period of time in our method, extra patient imaging dose can be reduced by an order of magnitude compared to continuous MV-kV imaging, while the clinical tumor targeting accuracy for thoracic or abdominal cancers is maintained. Furthermore, no additional hardware is required with the

  2. SyntenyTracker: a tool for defining homologous synteny blocks using radiation hybrid maps and whole-genome sequence

    Directory of Open Access Journals (Sweden)

    Lewin Harris A

    2009-07-01

    Full Text Available Abstract Background The recent availability of genomic sequences and BAC libraries for a large number of mammals provides an excellent opportunity for identifying comparatively-anchored markers that are useful for creating high-resolution radiation-hybrid (RH and BAC-based comparative maps. To use these maps for multispecies genome comparison and evolutionary inference, robust bioinformatic tools are required for the identification of chromosomal regions shared between genomes and to localize the positions of evolutionary breakpoints that are the signatures of chromosomal rearrangements. Here we report an automated tool for the identification of homologous synteny blocks (HSBs between genomes that tolerates errors common in RH comparative maps and can be used for automated whole-genome analysis of chromosome rearrangements that occur during evolution. Findings We developed an algorithm and software tool (SyntenyTracker that can be used for automated definition of HSBs using pair-wise RH or gene-based comparative maps as input. To verify correct implementation of the underlying algorithm, SyntenyTracker was used to identify HSBs in the cattle and human genomes. Results demonstrated 96% agreement with HSBs defined manually using the same set of rules. A comparison of SyntenyTracker with the AutoGRAPH synteny tool was performed using identical datasets containing 14,380 genes with 1:1 orthology in human and mouse. Discrepancies between the results using the two tools and advantages of SyntenyTracker are reported. Conclusion SyntenyTracker was shown to be an efficient and accurate automated tool for defining HSBs using datasets that may contain minor errors resulting from limitations in map construction methodologies. The utility of SyntenyTracker will become more important for comparative genomics as the number of mapped and sequenced genomes increases.

  3. SyntenyTracker: a tool for defining homologous synteny blocks using radiation hybrid maps and whole-genome sequence.

    Science.gov (United States)

    Donthu, Ravikiran; Lewin, Harris A; Larkin, Denis M

    2009-07-23

    The recent availability of genomic sequences and BAC libraries for a large number of mammals provides an excellent opportunity for identifying comparatively-anchored markers that are useful for creating high-resolution radiation-hybrid (RH) and BAC-based comparative maps. To use these maps for multispecies genome comparison and evolutionary inference, robust bioinformatic tools are required for the identification of chromosomal regions shared between genomes and to localize the positions of evolutionary breakpoints that are the signatures of chromosomal rearrangements. Here we report an automated tool for the identification of homologous synteny blocks (HSBs) between genomes that tolerates errors common in RH comparative maps and can be used for automated whole-genome analysis of chromosome rearrangements that occur during evolution. We developed an algorithm and software tool (SyntenyTracker) that can be used for automated definition of HSBs using pair-wise RH or gene-based comparative maps as input. To verify correct implementation of the underlying algorithm, SyntenyTracker was used to identify HSBs in the cattle and human genomes. Results demonstrated 96% agreement with HSBs defined manually using the same set of rules. A comparison of SyntenyTracker with the AutoGRAPH synteny tool was performed using identical datasets containing 14,380 genes with 1:1 orthology in human and mouse. Discrepancies between the results using the two tools and advantages of SyntenyTracker are reported. SyntenyTracker was shown to be an efficient and accurate automated tool for defining HSBs using datasets that may contain minor errors resulting from limitations in map construction methodologies. The utility of SyntenyTracker will become more important for comparative genomics as the number of mapped and sequenced genomes increases.

  4. High resolution radiation hybrid maps of bovine chromosomes 19 and 29: comparison with the bovine genome sequence assembly

    Directory of Open Access Journals (Sweden)

    Womack James E

    2007-09-01

    Full Text Available Abstract Background High resolution radiation hybrid (RH maps can facilitate genome sequence assembly by correctly ordering genes and genetic markers along chromosomes. The objective of the present study was to generate high resolution RH maps of bovine chromosomes 19 (BTA19 and 29 (BTA29, and compare them with the current 7.1X bovine genome sequence assembly (bovine build 3.1. We have chosen BTA19 and 29 as candidate chromosomes for mapping, since many Quantitative Trait Loci (QTL for the traits of carcass merit and residual feed intake have been identified on these chromosomes. Results We have constructed high resolution maps of BTA19 and BTA29 consisting of 555 and 253 Single Nucleotide Polymorphism (SNP markers respectively using a 12,000 rad whole genome RH panel. With these markers, the RH map of BTA19 and BTA29 extended to 4591.4 cR and 2884.1 cR in length respectively. When aligned with the current bovine build 3.1, the order of markers on the RH map for BTA19 and 29 showed inconsistencies with respect to the genome assembly. Maps of both the chromosomes show that there is a significant internal rearrangement of the markers involving displacement, inversion and flips within the scaffolds with some scaffolds being misplaced in the genome assembly. We also constructed cattle-human comparative maps of these chromosomes which showed an overall agreement with the comparative maps published previously. However, minor discrepancies in the orientation of few homologous synteny blocks were observed. Conclusion The high resolution maps of BTA19 (average 1 locus/139 kb and BTA29 (average 1 locus/208 kb presented in this study suggest that by the incorporation of RH mapping information, the current bovine genome sequence assembly can be significantly improved. Furthermore, these maps can serve as a potential resource for fine mapping QTL and identification of causative mutations underlying QTL for economically important traits.

  5. Emission from Very Small Grains and PAH Molecules in Monte Carlo Radiation Transfer Codes: Application to the Edge-On Disk of Gomez's Hamburger

    Science.gov (United States)

    Wood, Kenneth; Whitney, Barbara A.; Robitaille, Thomas; Draine, Bruce T.

    2008-12-01

    We have modeled optical to far-infrared images, photometry, and spectroscopy of the object known as Gomez's Hamburger. We reproduce the images and spectrum with an edge-on disk of mass 0.3 M⊙ and radius 1600 AU, surrounding an A0 III star at a distance of 280 pc. Our mass estimate is in excellent agreement with recent CO observations. However, our distance determination is more than an order of magnitude smaller than previous analyses, which inaccurately interpreted the optical spectrum. To accurately model the infrared spectrum we have extended our Monte Carlo radiation transfer codes to include emission from polycyclic aromatic hydrocarbon (PAH) molecules and very small grains (VSG). We do this using precomputed PAH/VSG emissivity files for a wide range of values of the mean intensity of the exciting radiation field. When Monte Carlo energy packets are absorbed by PAHs/VSGs, we reprocess them to other wavelengths by sampling from the emissivity files, thus simulating the absorption and reemission process without reproducing lengthy computations of statistical equilibrium, excitation, and de-excitation in the complex many-level molecules. Using emissivity lookup tables in our Monte Carlo codes gives us the flexibility to use the latest grain physics calculations of PAH/VSG emissivity and opacity that are being continually updated in the light of higher resolution infrared spectra. We find our approach gives a good representation of the observed PAH spectrum from the disk of Gomez's Hamburger. Our models also indicate that the PAHs/VSGs in the disk have a larger scale height than larger radiative equilibrium grains, providing evidence for dust coagulation and settling to the midplane.

  6. Validation of a GPU-based Monte Carlo code (gPMC) for proton radiation therapy: clinical cases study

    Science.gov (United States)

    Giantsoudi, Drosoula; Schuemann, Jan; Jia, Xun; Dowdell, Stephen; Jiang, Steve; Paganetti, Harald

    2015-03-01

    Monte Carlo (MC) methods are recognized as the gold-standard for dose calculation, however they have not replaced analytical methods up to now due to their lengthy calculation times. GPU-based applications allow MC dose calculations to be performed on time scales comparable to conventional analytical algorithms. This study focuses on validating our GPU-based MC code for proton dose calculation (gPMC) using an experimentally validated multi-purpose MC code (TOPAS) and compare their performance for clinical patient cases. Clinical cases from five treatment sites were selected covering the full range from very homogeneous patient geometries (liver) to patients with high geometrical complexity (air cavities and density heterogeneities in head-and-neck and lung patients) and from short beam range (breast) to large beam range (prostate). Both gPMC and TOPAS were used to calculate 3D dose distributions for all patients. Comparisons were performed based on target coverage indices (mean dose, V95, D98, D50, D02) and gamma index distributions. Dosimetric indices differed less than 2% between TOPAS and gPMC dose distributions for most cases. Gamma index analysis with 1%/1 mm criterion resulted in a passing rate of more than 94% of all patient voxels receiving more than 10% of the mean target dose, for all patients except for prostate cases. Although clinically insignificant, gPMC resulted in systematic underestimation of target dose for prostate cases by 1-2% compared to TOPAS. Correspondingly the gamma index analysis with 1%/1 mm criterion failed for most beams for this site, while for 2%/1 mm criterion passing rates of more than 94.6% of all patient voxels were observed. For the same initial number of simulated particles, calculation time for a single beam for a typical head and neck patient plan decreased from 4 CPU hours per million particles (2.8-2.9 GHz Intel X5600) for TOPAS to 2.4 s per million particles (NVIDIA TESLA C2075) for gPMC. Excellent agreement was

  7. Radiation shielding analysis and optimisation for the Mineral-PET Kimberlite sorting facility using the Monte Carlo calculation code MCNPX

    OpenAIRE

    2014-01-01

    M.Phil. (Energy Studies) This dissertation details the radiation shielding analysis and optimization performed to design a shield for the mineral-PET (Positron Emission Tomography) facility. PET is a nuclear imaging technique currently used in diagnostic medicine. The technique is based on the detection of 511 keV coincident and co-linear photons produced from the annihilation of a positron (produced by a positron emitter) and a nearby electron. The technique is now being considered for th...

  8. Dosimetric comparison of hybrid volumetric-modulated arc therapy, volumetric-modulated arc therapy, and intensity-modulated radiation therapy for left-sided early breast cancer

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jia-Fu [Department of Radiation Physics, Taichung Veterans General Hospital, Taichung, Taiwan (China); Yeh, Dah-Cherng [Department of General Surgery, Taichung Veterans General Hospital, Taichung, Taiwan (China); Yeh, Hui-Ling, E-mail: hlyeh@vghtc.gov.tw [Department of Radiation Oncology, Taichung Veterans General Hospital, Taichung, Taiwan (China); Chang, Chen-Fa [Department of Radiation Physics, Taichung Veterans General Hospital, Taichung, Taiwan (China); Lin, Jin-Ching [Department of Radiation Oncology, Taichung Veterans General Hospital, Taichung, Taiwan (China)

    2015-10-01

    To compare the dosimetric performance of 3 different treatment techniques: hybrid volumetric-modulated arc therapy (hybrid-VMAT), pure-VMAT, and fixed-field intensity-modulated radiation therapy (F-IMRT) for whole-breast irradiation of left-sided early breast cancer. The hybrid-VMAT treatment technique and 2 other treatment techniques—pure-VMAT and F-IMRT—were compared retrospectively in 10 patients with left-sided early breast cancer. The treatment plans of these patients were replanned using the same contours based on the original computed tomography (CT) data sets. Dosimetric parameters were calculated to evaluate plan quality. Total monitor units (MUs) and delivery time were also recorded and evaluated. The hybrid-VMAT plan generated the best results in dose coverage of the target and the dose uniformity inside the target (p < 0.0001 for conformal index [CI]; p = 0.0002 for homogeneity index [HI] of planning target volume [PTV]{sub 50.4} {sub Gy} and p < 0.0001 for HI of PTV{sub 62} {sub Gy}). Volumes of ipsilateral lung irradiated to doses of 20 Gy (V{sub 20} {sub Gy}) and 5 Gy (V{sub 5} {sub Gy}) by the hybrid-VMAT plan were significantly less than those of the F-IMRT and the pure-VMAT plans. The volume of ipsilateral lung irradiated to a dose of 5 Gy was significantly less using the hybrid-VMAT plan than that using the F-IMRT or the pure-VMAT plan. The total mean MUs for the hybrid-VMAT plan were significantly less than those for the F-IMRT or the pure-VMAT plan. The mean machine delivery time was 3.23 ± 0.29 minutes for the hybrid-VMAT plans, which is longer than that for the pure-VMAT plans but shorter than that for the F-IMRT plans. The hybrid-VMAT plan is feasible for whole-breast irradiation of left-sided early breast cancer.

  9. A fast tree-based method for estimating column densities in adaptive mesh refinement codes. Influence of UV radiation field on the structure of molecular clouds

    Science.gov (United States)

    Valdivia, Valeska; Hennebelle, Patrick

    2014-11-01

    Context. Ultraviolet radiation plays a crucial role in molecular clouds. Radiation and matter are tightly coupled and their interplay influences the physical and chemical properties of gas. In particular, modeling the radiation propagation requires calculating column densities, which can be numerically expensive in high-resolution multidimensional simulations. Aims: Developing fast methods for estimating column densities is mandatory if we are interested in the dynamical influence of the radiative transfer. In particular, we focus on the effect of the UV screening on the dynamics and on the statistical properties of molecular clouds. Methods: We have developed a tree-based method for a fast estimate of column densities, implemented in the adaptive mesh refinement code RAMSES. We performed numerical simulations using this method in order to analyze the influence of the screening on the clump formation. Results: We find that the accuracy for the extinction of the tree-based method is better than 10%, while the relative error for the column density can be much more. We describe the implementation of a method based on precalculating the geometrical terms that noticeably reduces the calculation time. To study the influence of the screening on the statistical properties of molecular clouds we present the probability distribution function of gas and the associated temperature per density bin and the mass spectra for different density thresholds. Conclusions: The tree-based method is fast and accurate enough to be used during numerical simulations since no communication is needed between CPUs when using a fully threaded tree. It is then suitable to parallel computing. We show that the screening for far UV radiation mainly affects the dense gas, thereby favoring low temperatures and affecting the fragmentation. We show that when we include the screening, more structures are formed with higher densities in comparison to the case that does not include this effect. We

  10. A diffusive radiation hydrodynamics code, xRage, is implemented to compare radiation flow with experimental data from the Omega laser facility

    Science.gov (United States)

    Vandervort, Robert; Elgin, Laura; Farag, Ebraheem; Mussack, Katie; Baumgaertel, Jessica Ann; Keiter, Paul; Klein, Sallee; Orban, Christopher; Drake, R. Paul

    2015-11-01

    A sound speed discrepancy between solar models and data collected using helioseismology exists. The sound speed discrepancy is the most pronounced at the base of the convective zone (CZ) for otherwise consistent solar models. One potential solution is that the opacity models for important elements such as carbon, nitrogen and oxygen are incomplete. At these high energy-density conditions few relevant opacity measurements exist to compare to the models. Only relatively recently have user facilities been able to reach the temperatures and densities that resemble the convective zone base. It is our long term goal to determine the opacities of carbon, nitrogen and oxygen at the relevant conditions. Preliminary testing has occurred at the Omega Laser Facility in Rochester, New York. Presented are the results of the shots taken on April 22, 2015. A half hohlraum was used to drive a supersonic radiation front through a dominantly carbon, CRF, foam. These results are compared to diffusive xRage simulations. (LA-UR-15-25495)

  11. Physics study of microbeam radiation therapy with PSI-version of Monte Carlo code GEANT as a new computational tool

    CERN Document Server

    Stepanek, J; Laissue, J A; Lyubimova, N; Di Michiel, F; Slatkin, D N

    2000-01-01

    Microbeam radiation therapy (MRT) is a currently experimental method of radiotherapy which is mediated by an array of parallel microbeams of synchrotron-wiggler-generated X-rays. Suitably selected, nominally supralethal doses of X-rays delivered to parallel microslices of tumor-bearing tissues in rats can be either palliative or curative while causing little or no serious damage to contiguous normal tissues. Although the pathogenesis of MRT-mediated tumor regression is not understood, as in all radiotherapy such understanding will be based ultimately on our understanding of the relationships among the following three factors: (1) microdosimetry, (2) damage to normal tissues, and (3) therapeutic efficacy. Although physical microdosimetry is feasible, published information on MRT microdosimetry to date is computational. This report describes Monte Carlo-based computational MRT microdosimetry using photon and/or electron scattering and photoionization cross-section data in the 1 e V through 100 GeV range distrib...

  12. A review of the use and potential of the GATE Monte Carlo simulation code for radiation therapy and dosimetry applications.

    Science.gov (United States)

    Sarrut, David; Bardiès, Manuel; Boussion, Nicolas; Freud, Nicolas; Jan, Sébastien; Létang, Jean-Michel; Loudos, George; Maigne, Lydia; Marcatili, Sara; Mauxion, Thibault; Papadimitroulas, Panagiotis; Perrot, Yann; Pietrzyk, Uwe; Robert, Charlotte; Schaart, Dennis R; Visvikis, Dimitris; Buvat, Irène

    2014-06-01

    In this paper, the authors' review the applicability of the open-source GATE Monte Carlo simulation platform based on the GEANT4 toolkit for radiation therapy and dosimetry applications. The many applications of GATE for state-of-the-art radiotherapy simulations are described including external beam radiotherapy, brachytherapy, intraoperative radiotherapy, hadrontherapy, molecular radiotherapy, and in vivo dose monitoring. Investigations that have been performed using GEANT4 only are also mentioned to illustrate the potential of GATE. The very practical feature of GATE making it easy to model both a treatment and an imaging acquisition within the same framework is emphasized. The computational times associated with several applications are provided to illustrate the practical feasibility of the simulations using current computing facilities.

  13. A review of the use and potential of the GATE Monte Carlo simulation code for radiation therapy and dosimetry applications

    Energy Technology Data Exchange (ETDEWEB)

    Sarrut, David, E-mail: david.sarrut@creatis.insa-lyon.fr [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon (France); Université Lyon 1 (France); Centre Léon Bérard (France); Bardiès, Manuel; Marcatili, Sara; Mauxion, Thibault [Inserm, UMR1037 CRCT, F-31000 Toulouse, France and Université Toulouse III-Paul Sabatier, UMR1037 CRCT, F-31000 Toulouse (France); Boussion, Nicolas [INSERM, UMR 1101, LaTIM, CHU Morvan, 29609 Brest (France); Freud, Nicolas; Létang, Jean-Michel [Université de Lyon, CREATIS, CNRS UMR5220, Inserm U1044, INSA-Lyon, Université Lyon 1, Centre Léon Bérard, 69008 Lyon (France); Jan, Sébastien [CEA/DSV/I2BM/SHFJ, Orsay 91401 (France); Loudos, George [Department of Medical Instruments Technology, Technological Educational Institute of Athens, Athens 12210 (Greece); Maigne, Lydia; Perrot, Yann [UMR 6533 CNRS/IN2P3, Université Blaise Pascal, 63171 Aubière (France); Papadimitroulas, Panagiotis [Department of Biomedical Engineering, Technological Educational Institute of Athens, 12210, Athens (Greece); Pietrzyk, Uwe [Institut für Neurowissenschaften und Medizin, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany and Fachbereich für Mathematik und Naturwissenschaften, Bergische Universität Wuppertal, 42097 Wuppertal (Germany); Robert, Charlotte [IMNC, UMR 8165 CNRS, Universités Paris 7 et Paris 11, Orsay 91406 (France); and others

    2014-06-15

    In this paper, the authors' review the applicability of the open-source GATE Monte Carlo simulation platform based on the GEANT4 toolkit for radiation therapy and dosimetry applications. The many applications of GATE for state-of-the-art radiotherapy simulations are described including external beam radiotherapy, brachytherapy, intraoperative radiotherapy, hadrontherapy, molecular radiotherapy, and in vivo dose monitoring. Investigations that have been performed using GEANT4 only are also mentioned to illustrate the potential of GATE. The very practical feature of GATE making it easy to model both a treatment and an imaging acquisition within the same frameworkis emphasized. The computational times associated with several applications are provided to illustrate the practical feasibility of the simulations using current computing facilities.

  14. Montecarlo simulation code in optimisation of the IntraOperative Radiation Therapy treatment with mobile dedicated accelerator

    Science.gov (United States)

    Catalano, M.; Agosteo, S.; Moretti, R.; Andreoli, S.

    2007-06-01

    The principle of optimisation of the EURATOM 97/43 directive foresees that for all medical exposure of individuals for radiotherapeutic purposes, exposures of target volumes shall be individually planned, taking into account that doses of non-target volumes and tissues shall be as low as reasonably achievable and consistent with the intended radiotherapeutic purpose of the exposure. Treatment optimisation has to be carried out especially in non conventional radiotherapic procedures, as Intra Operative Radiation Therapy (IORT) with mobile dedicated LINear ACcelerator (LINAC), which does not make use of a Treatment Planning System. IORT is carried out with electron beams and refers to the application of radiation during a surgical intervention, after the removal of a neoplastic mass and it can also be used as a one-time/stand alone treatment in initial cancer of small volume. IORT foresees a single session and a single beam only; therefore it is necessary to use protection systems (disks) temporary positioned between the target volume and the underlying tissues, along the beam axis. A single high Z shielding disk is used to stop the electrons of the beam at a certain depth and protect the tissues located below. Electron back scatter produces an enhancement in the dose above the disk, and this can be reduced if a second low Z disk is placed above the first. Therefore two protection disks are used in clinical application. On the other hand the dose enhancement at the interface of the high Z disk and the target, due to back scattering radiation, can be usefully used to improve the uniformity in treatment of thicker target volumes. Furthermore the dose above the disks of different Z material has to be evaluated in order to study the optimal combination of shielding disks that allow both to protect the underlying tissues and to obtain the most uniform dose distribution in target volumes of different thicknesses. The dose enhancement can be evaluated using the electron

  15. 137Cesium-induced chromosome aberrations analyzed by fluorescence in situ hybridization: eight years follow up of the Goiânia radiation accident victims.

    Science.gov (United States)

    Natarajan, A T; Santos, S J; Darroudi, F; Hadjidikova, V; Vermeulen, S; Chatterjee, S; Berg, M; Grigorova, M; Sakamoto-Hojo, E T; Granath, F; Ramalho, A T; Curado, M P

    1998-05-25

    The radiation accident in focus here occurred in a section of Goiânia (Brazil) where more than a hundred individuals were contaminated with 137Cesium on September 1987. In order to estimate the absorbed radiation doses, initial frequencies of dicentrics and rings were determined in 129 victims [A.T. Ramalho, PhD Thesis, Subsidios a tecnica de dosimetria citogenetica gerados a partir da analise de resultados obtidos com o acidente radiologico de Goiânia, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil, 1992]. We have followed some of these victims cytogenetically over the years seeking for parameters that could be used as basis for retrospective radiation dosimetry. Our data on translocation frequencies obtained by fluorescence in situ hybridization (FISH) could be directly compared to the baseline frequencies of dicentrics available for those same victims. Our results provided valuable information on how precise these estimates are. The frequencies of translocations observed years after the radiation exposure were two to three times lower than the initial dicentrics frequencies, the differences being larger at higher doses (>1 Gy). The accuracy of such dose estimates might be increased by scoring sufficient amount of cells. However, factors such as the persistence of translocation carrying lymphocytes, translocation levels not proportional to chromosome size, and inter-individual variation reduce the precision of these estimates.

  16. Identification of protein-coding sequences using the hybridization of 18S rRNA and mRNA during translation.

    Science.gov (United States)

    Xing, Chuanhua; Bitzer, Donald L; Alexander, Winser E; Vouk, Mladen A; Stomp, Anne-Marie

    2009-02-01

    We introduce a new approach in this article to distinguish protein-coding sequences from non-coding sequences utilizing a period-3, free energy signal that arises from the interactions of the 3'-terminal nucleotides of the 18S rRNA with mRNA. We extracted the special features of the amplitude and the phase of the period-3 signal in protein-coding regions, which is not found in non-coding regions, and used them to distinguish protein-coding sequences from non-coding sequences. We tested on all the experimental genes from Saccharomyces cerevisiae and Schizosaccharomyces pombe. The identification was consistent with the corresponding information from GenBank, and produced better performance compared to existing methods that use a period-3 signal. The primary tests on some fly, mouse and human genes suggests that our method is applicable to higher eukaryotic genes. The tests on pseudogenes indicated that most pseudogenes have no period-3 signal. Some exploration of the 3'-tail of 18S rRNA and pattern analysis of protein-coding sequences supported further our assumption that the 3'-tail of 18S rRNA has a role of synchronization throughout translation elongation process. This, in turn, can be utilized for the identification of protein-coding sequences.

  17. Hybrid plan verification for intensity-modulated radiation therapy (IMRT) using the 2D ionization chamber array I'mRT MatriXX--a feasibility study.

    Science.gov (United States)

    Dobler, Barbara; Streck, Natalia; Klein, Elisabeth; Loeschel, Rainer; Haertl, Petra; Koelbl, Oliver

    2010-01-21

    The 2D ionization chamber array I'mRT MatriXX (IBA, Schwarzenbruck, Germany) has been developed for absolute 2D dosimetry and verification of intensity-modulated radiation therapy (IMRT) for perpendicular beam incidence. The aim of this study is to evaluate the applicability of I'mRT MatriXX for oblique beam incidence and hybrid plan verification of IMRT with original gantry angles. For the assessment of angular dependence, open fields with gantry angles in steps of 10 degrees were calculated on a CT scan of I'mRT MatriXX. For hybrid plan verification, 17 clinical IMRT plans and one rotational plan were used. Calculations were performed with pencil beam (PB), collapsed cone (CC) and Monte Carlo (MC) methods, which had been previously validated. Measurements were conducted on an Elekta SynergyS linear accelerator. To assess the potential and limitations of the system, gamma evaluation was performed with different dose tolerances and distances to agreement. Hybrid plan verification passed the gamma test with 4% dose tolerance and 3 mm distance to agreement in all cases, in 82-88% of the cases for tolerances of 3%/3 mm, and in 59-76% of the cases if 3%/2 mm were used. Separate evaluation of the low dose and high dose regions showed that I'mRT MatriXX can be used for hybrid plan verification of IMRT plans within 3% dose tolerance and 3 mm distance to agreement with a relaxed dose tolerance of 4% in the low dose region outside the multileaf collimator (MLC).

  18. 运用抑制消减杂交构建辐射诱导EST库%Suppression subtractive hybridization in construction of radiation-induced EST library

    Institute of Scientific and Technical Information of China (English)

    铁轶; 罗瑛; 隋建丽; 周平坤

    2001-01-01

    目的 克隆并鉴定低剂量辐射诱导基因,为探讨低剂量辐射生物学效应分子机理提供有益信息。方法 0.5 Gy γ射线照射人胚肺细胞后,用抑制消减杂交技术(Suppression Subtractive Hybridization,SSH)构建低剂量辐射诱导EST库。用反向Northern杂交法对库中的EST片段进行筛选,挑取阳性克隆测序,并在GenBank序列数据库中进行同源性比较。结果 得到受照后表达升高90个EST序列,代表21个基因的转录产物,部分基因的功能已明确。从功能上分析,这些基因产物的生物学作用涵盖了细胞周期、信号转导、细胞骨架、代谢、蛋白合成等几个重要的细胞生物学代谢反应过程,显示出细胞对低剂量辐射反应过程的多样性。另外,实验还获得4个新cDNA序列。结论 利用抑制消减杂交技术,从辐射前后HEL细胞中,得到低剂量辐射诱导EST片段,它们与细胞周期、增殖、代谢、信号转导、应激反应等相关,这些基因可能在细胞的低剂量辐射效应中起到重要作用。%Objective To clone and identify radiation-induced genes from 0.5 Gy γ-ray irradiated human embryo lung cells(HEL).The identification and functional studies of radiation-induced genes will prompt the elucidation of the molecular mechanisms of low dose radiation-induced biological effects.It will also profit the understanding of the basic processes of cellular metabolisms. Methods  A low dose radiation-induced differentially displaying EST library has been constructed by suppression subtractive hybridization from HEL cells irradiated with 0.5 Gy γ-rays.The EST library was screened by reverse Northern hybridization analysis.Positive clones were sequenced and the similarity was searched against the DNA database in GenBank. Results  Altogether 90 positive cDNA clones with increased expression after 0.5 Gy irradiation were identified which corresponded to 21 individual genes

  19. Symmetrical Key Automatic Changing Cryptography Based on Simple Hybrid Selection Coding%基于简易混合选择编码的对称密钥自变动加密

    Institute of Scientific and Technical Information of China (English)

    罗俊; 张国平

    2012-01-01

    Aiming at the encryption system with lower security requirements, this paper puts forward a symmetrical key automatic changing cryptography scheme based on simple hybrid selection coding, with the combination of unilateral canonical Huffman coding and fixed-length coding. The statistical results of plaintext are used as their own encrypted key and coding basis, which makes the scheme to be easy to implement and calculate and of cost low. It is proved that when the keys are completely unknown, the cracking of the encryption system has great difficulty.%针对安全性要求不太高的加密系统,将单边范式Huffman编码与等长编码相结合,提出一种基于混合选择编码的对称密钥自变动加密方案.通过将明文的统计结果作为自身加密的密钥和编码依据,使方案易于实现,且计算存储成本低.理论分析结果证明,在密钥完全未知的情况下破解该加密体制难度较大.

  20. A gene-based radiation hybrid map of the gilthead sea bream Sparus aurata refines and exploits conserved synteny with Tetraodon nigroviridis

    Directory of Open Access Journals (Sweden)

    Tsalavouta Matina

    2007-02-01

    Full Text Available Abstract Background Comparative teleost studies are of great interest since they are important in aquaculture and in evolutionary issues. Comparing genomes of fully sequenced model fish species with those of farmed fish species through comparative mapping offers shortcuts for quantitative trait loci (QTL detections and for studying genome evolution through the identification of regions of conserved synteny in teleosts. Here a comparative mapping study is presented by radiation hybrid (RH mapping genes of the gilthead sea bream Sparus aurata, a non-model teleost fish of commercial and evolutionary interest, as it represents the worldwide distributed species-rich family of Sparidae. Results An additional 74 microsatellite markers and 428 gene-based markers appropriate for comparative mapping studies were mapped on the existing RH map of Sparus aurata. The anchoring of the RH map to the genetic linkage map resulted in 24 groups matching the karyotype of Sparus aurata. Homologous sequences to Tetraodon were identified for 301 of the gene-based markers positioned on the RH map of Sparus aurata. Comparison between Sparus aurata RH groups and Tetraodon chromosomes (karyotype of Tetraodon consists of 21 chromosomes in this study reveals an unambiguous one-to-one relationship suggesting that three Tetraodon chromosomes correspond to six Sparus aurata radiation hybrid groups. The exploitation of this conserved synteny relationship is furthermore demonstrated by in silico mapping of gilthead sea bream expressed sequence tags (EST that give a significant similarity hit to Tetraodon. Conclusion The addition of primarily gene-based markers increased substantially the density of the existing RH map and facilitated comparative analysis. The anchoring of this gene-based radiation hybrid map to the genome maps of model species broadened the pool of candidate genes that mainly control growth, disease resistance, sex determination and reversal, reproduction as well

  1. MORSE Monte Carlo code

    Energy Technology Data Exchange (ETDEWEB)

    Cramer, S.N.

    1984-01-01

    The MORSE code is a large general-use multigroup Monte Carlo code system. Although no claims can be made regarding its superiority in either theoretical details or Monte Carlo techniques, MORSE has been, since its inception at ORNL in the late 1960s, the most widely used Monte Carlo radiation transport code. The principal reason for this popularity is that MORSE is relatively easy to use, independent of any installation or distribution center, and it can be easily customized to fit almost any specific need. Features of the MORSE code are described.

  2. A study of longwave radiation codes for climate studies: Validation with ARM observations and tests in general circulation models. Final report, September 15, 1990--October 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Ellingson, R.G.; Baer, F.

    1998-09-01

    DOE has launched a major initiative -- the Atmospheric Radiation Measurements (ARM) Program -- directed at improving the parameterization of the physics governing cloud and radiative processes in general circulation models (GCMs). One specific goal of ARM is to improve the treatment of radiative transfer in GCMs under clear-sky, general overcast and broken cloud conditions. In 1990, the authors proposed to contribute to this goal by attacking major problems connected with one of the dominant radiation components of the problem -- longwave radiation. In particular, their long-term research goals are to: develop an optimum longwave radiation model for use in GCMs that has been calibrated with state-of-the-art observations, assess the impact of the longwave radiative forcing in a GCM, determine the sensitivity of a GCM to the radiative model used in it, and determine how the longwave radiative forcing contributes relatively when compared to shortwave radiative forcing, sensible heating, thermal advection and expansion.

  3. Hybrid nanostructured thin-films by PLD for enhanced field emission performance for radiation micro-nano dosimetry applications

    Energy Technology Data Exchange (ETDEWEB)

    Manikandan, E., E-mail: maniphysics@gmail.com [UNESCO-UNISA AFNET in Nanosciences/Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, PO Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), Materials Research Department, iThemba LABS–National Research Foundation (NRF), 1 Old Faure Road, Somerset West, PO Box 722, Western Cape (South Africa); Materials Science Group (MSG), Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603102 (India); Corrosion Science and Technology Group, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603102 (India); Sree Balaji Medical College & Hospital (SBMCH), Bharath University, Chrompet, Chennai 600044 (India); Kennedy, J. [UNESCO-UNISA AFNET in Nanosciences/Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, PO Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), Materials Research Department, iThemba LABS–National Research Foundation (NRF), 1 Old Faure Road, Somerset West, PO Box 722, Western Cape (South Africa); The MacDiarmid Institute for Advanced Materials and Nanotechnology (New Zealand); Kavitha, G. [UNESCO-UNISA AFNET in Nanosciences/Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, PO Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), Materials Research Department, iThemba LABS–National Research Foundation (NRF), 1 Old Faure Road, Somerset West, PO Box 722, Western Cape (South Africa); PG& Research Dept of Physics, AM Jain College Affiliated to University of Madras, Chennai 600114 (India); and others

    2015-10-25

    We report the observation of hybrid nanostructured thin-films such as diamond-like carbon (DLC) signature on the ZnO epitaxial thin-films grown onto the device silicon/quartz substrate by reactive pulsed laser deposition (r-PLD) under the argon–oxygen (Ar|O{sub 2}) ambient at 573 K. Undoped and Carbon (C) doped epitaxial ZnO thin-film layer formation is revealed by the accelerator based ion-beam analysis (IBA) technique of resonant Rutherford backscattering spectrometry (RRBS), glancing-incidence X-ray diffraction (GIXRD) pattern, micro-Raman spectroscopy (μ-RS) and field-emission (F-E) studies. The RRBS and GIXRD results show the deposition of epitaxial thin-films containing C into ZnO. The μ-RS technique is a standard nondestructive tool (NDT) for the characterization of crystalline, nano-crystalline, and amorphous carbons (a-C). As grown ZnO and C-doped ZnO thin-films μ-RS result reveal the doping effect of C-impurities that appear in the form of DLC evident from Raman peaks at 1357 and 1575 cm{sup −1} along with a wurtzite structure peak at 438 cm{sup −1} with E{sub 2}(h) phonon of ZnO. The electron transport F-E result shows the hybrid thin-films has high conductivity than the un-doped film. Fabricated hybrid nanostructured thin-films materials could be very useful for the emerging applications of micro-nano dosimetry. - Highlights: • Observation of hybrid nanostructured diamond-like carbon (DLC) on ZnO epitaxial thin-films at 573 K. • Carbon doped epitaxial ZnO thin-film layer formation is revealed by RRBS, Micro-Raman. • Field-emission (F-E) study. • DLC formation evident from Raman peaks at 1357 and 1575 cm{sup −1} along with a wurtzite structure peak of ZnO. • The electron transport F-E result shows the hybrid thin-film has high conductivity than the undoped thin-film.

  4. Application of a method based on the measurement of radiation reflectance when estimating the sensitivity of selected grain maize hybrids to the herbicide CALLISTO 480 SC + ATPLUS 463

    Directory of Open Access Journals (Sweden)

    Michal Vondra

    2009-01-01

    Full Text Available The application of methods based on measurements of photosynthesis efficiency is now more and more popular and used not only for the evaluation of the efficiency of herbicides but also for the estimation of their phytotoxicity to the cultivated crop. These methods enable to determine also dif­fe­ren­ces in the sensitivity of cultivars and/or hybrids to individual herbicides. The advantage of these methods consists above all in the speed and accuracy of measuring.In a field experiment, the sensitivity of several selected grain maize hybrids (EDENSTAR, NK AROBASE, NK LUGAN, LG 33.30 and NK THERMO to the herbicide CALLISTO 480 SC + ATPLUS 463 was tested for a period of three years. The sensitivity to a registered dose of 0.25 l . ha−1 + 0.5 % was measured by means of the apparatus PS1 meter, which could measure the reflected radiation. Measurements of sensitivity of hybrids were performed on the 2nd, 3rd, 4th, 5th and 8th day after the application of the tested herbicide, i.e. in the growing stage of the 3rd–5th leaf. Plant material was harvested using a small-plot combine harvester SAMPO 2010. Samples were weighed and converted to the yield with 15 % of moisture in grain DM.The obtained three-year results did not demonstrate differences in sensitivity of tested hybrids to the registered dose of the herbicide CALLISTO 480 SC + ATPLUS 463 (i.e. 0.25 l . ha−1 + 0,5 %. Recorded results indicated that for the majority of tested hybrids the most critical were the 4th and the 5th day after the application; on these days the average PS1 values were the highest at all. In years 2005 and 2007, none of the tested hybrids exceeded the limit value 15 (which indicated a certain decrease in the efficiency of photosynthesis. Although in 2006 three of tested hybrids showed a certain decrease in photosynthetic activity (i.e. EDENSTAR and NK AROBASE on the 3rd day and NK LUGAN on the 2nd–4th day after the application, no visual symptoms

  5. Flow Analysis of Code Customizations

    DEFF Research Database (Denmark)

    Hessellund, Anders; Sestoft, Peter

    2008-01-01

    Inconsistency between metadata and code customizations is a major concern in modern, configurable enterprise systems. The increasing reliance on metadata, in the form of XML files, and code customizations, in the form of Java files, has led to a hybrid development platform. The expected consisten...

  6. Optical colours and spectral indices of z = 0.1 eagle galaxies with the 3D dust radiative transfer code skirt

    Science.gov (United States)

    Trayford, James W.; Camps, Peter; Theuns, Tom; Baes, Maarten; Bower, Richard G.; Crain, Robert A.; Gunawardhana, Madusha L. P.; Schaller, Matthieu; Schaye, Joop; Frenk, Carlos S.

    2017-09-01

    We present mock optical images, broad-band and H α fluxes, and D4000 spectral indices for 30 145 galaxies from the eagle hydrodynamical simulation at redshift z = 0.1, modelling dust with the skirt Monte Carlo radiative transfer code. The modelling includes a subgrid prescription for dusty star-forming regions, with both the subgrid obscuration of these regions and the fraction of metals in diffuse interstellar dust calibrated against far-infrared fluxes of local galaxies. The predicted optical colours as a function of stellar mass agree well with observation, with the skirt model showing marked improvement over a simple dust-screen model. The orientation dependence of attenuation is weaker than observed because eagle galaxies are generally puffier than real galaxies, due to the pressure floor imposed on the interstellar medium (ISM). The mock H α luminosity function agrees reasonably well with the data, and we quantify the extent to which dust obscuration affects observed H α fluxes. The distribution of D4000 break values is bimodal, as observed. In the simulation, 20 per cent of galaxies deemed 'passive' for the skirt model, i.e. exhibiting D4000 >1.8, are classified 'active' when ISM dust attenuation is not included. The fraction of galaxies with stellar mass greater than 1010 M⊙ that are deemed passive is slightly smaller than observed, which is due to low levels of residual star formation in these simulated galaxies. Colour images, fluxes and spectra of eagle galaxies are to be made available through the public eagle data base.

  7. Transport Test Problems for Hybrid Methods Development

    Energy Technology Data Exchange (ETDEWEB)

    Shaver, Mark W.; Miller, Erin A.; Wittman, Richard S.; McDonald, Benjamin S.

    2011-12-28

    This report presents 9 test problems to guide testing and development of hybrid calculations for the ADVANTG code at ORNL. These test cases can be used for comparing different types of radiation transport calculations, as well as for guiding the development of variance reduction methods. Cases are drawn primarily from existing or previous calculations with a preference for cases which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22.

  8. Joining of Metal-Plastics-Hybrid Structures Using Laser Radiation by Considering the Surface Structure of the Metal

    Directory of Open Access Journals (Sweden)

    Christian Hopmann

    2016-01-01

    Full Text Available Lightweight construction is a central technology in today’s industrial production. One way to achieve the climate goals is the production of hybrid compounds of metal and plastic. The manufacturing process for these hybrid parts can be divided into in-mold assembly and postmold assembly. The postmold assembly includes thermal joining by laser, which is applied in the context of this paper. For the investigations, four plastics (MABS, PA6.6-GF35, PP, and PC, which differ in their properties, and three metals (unalloyed steel, stainless steel, and aluminum are combined and analyzed. These materials have been used, since they have a huge significance in the automotive industry. Preliminary studies showed that an adhesive bond between the two materials is achieved using metal with a structured surface. According to these studies, three structuring processes for metals (selective laser melting (SLM, NRX, and a welded metallic tissue are tested. The quality of the material/structure combinations is tested in tensile-shear-tests, microscopy images, and alternating climate tests. Compounds with SLM-Structure achieve highest strength, while compounds with aluminum are much more complex to manufacture.

  9. See It With Your Own Eyes: Marker-less Mobile Augmented Reality for Radiation Awareness in the Hybrid Room.

    Science.gov (United States)

    Loy Rodas, Nicolas; Barrera, Fernando; Padoy, Nicolas

    2016-04-29

    We present an approach to provide awareness to the harmful ionizing radiation generated during X-ray guided minimally invasive procedures. A hand-held screen is used to display directly in the user's view information related to radiation safety in a mobile augmented reality (AR) manner. Instead of using markers, we propose a method to track the observer's viewpoint which relies on the use of multiple RGB-D sensors and combines equipment detection for tracking initialization with a KinectFusion-like approach for frame-to-frame tracking. Two of the sensors are ceiling-mounted and a third one is attached to the hand-held screen. The ceiling cameras keep an updated model of the room's layout, which is used to exploit context information and improve the relocalization procedure. The system is evaluated on a multi-camera dataset generated inside an operating room (OR) and containing ground-truth poses of the AR display. This dataset includes a wide variety of sequences with different scene configurations, occlusions, motion in the scene and abrupt viewpoint changes. Qualitative results illustrating the different AR visualization modes for radiation awareness provided by the system are also presented. Our approach allows the user to benefit from a large AR visualization area and permits to recover from tracking failure caused by vast motion or changes in the scene just by looking at an equipment. The system enables the user to see the 3D propagation of radiation, the medical staff's exposure and/or the doses deposited on the patient's surface as seen through his own eyes.

  10. See It With Your Own Eyes: Markerless Mobile Augmented Reality for Radiation Awareness in the Hybrid Room.

    Science.gov (United States)

    Loy Rodas, Nicolas; Barrera, Fernando; Padoy, Nicolas

    2017-02-01

    We present an approach to provide awareness to the harmful ionizing radiation generated during X-ray-guided minimally invasive procedures. A hand-held screen is used to display directly in the user's view information related to radiation safety in a mobile augmented reality (AR) manner. Instead of using markers, we propose a method to track the observer's viewpoint, which relies on the use of multiple RGB-D sensors and combines equipment detection for tracking initialization with a KinectFusion-like approach for frame-to-frame tracking. Two of the sensors are ceiling-mounted and a third one is attached to the hand-held screen. The ceiling cameras keep an updated model of the room's layout, which is used to exploit context information and improve the relocalization procedure. The system is evaluated on a multicamera dataset generated inside an operating room (OR) and containing ground-truth poses of the AR display. This dataset includes a wide variety of sequences with different scene configurations, occlusions, motion in the scene, and abrupt viewpoint changes. Qualitative results illustrating the different AR visualization modes for radiation awareness provided by the system are also presented. Our approach allows the user to benefit from a large AR visualization area and permits to recover from tracking failure caused by vast motion or changes in the scene just by looking at a piece of equipment. The system enables the user to see the 3-D propagation of radiation, the medical staff's exposure, and/or the doses deposited on the patient's surface as seen through his own eyes.

  11. Performance of water and hybrid stabilized electric arcs: the impact of dependence of radiation losses and plasma density on pressure

    Science.gov (United States)

    Jeništa, J.; Bartlová, M.; Aubrecht, V.

    2006-10-01

    Processes in the worldwide unique type of thermal plasma generator with water vortex stabilization and combined stabilization of arc by argon flow and water vortex have been numerically studied. Two-dimensional axisymmetric numerical model assumes laminar and compressible plasma flow in the state of local thermodynamic equilibrium. The calculation domain includes the arc discharge area between the near-cathode region and the outlet nozzle of the plasma torch. Radiation losses from the arc are calculated by the partial characteristics method for atmospheric pressure water and argon-water discharges. Thermal, electrical and fluid-dynamic characteristics of such arcs have been studied for the range of currents 150÷600 A under the assumption that radiation losses and plasma density depend linearly on pressure. It was proved that, taking this dependence into account, plasma velocity decrease while power losses from the arc by radiation and radial conduction increase with current. Outlet plasma temperature as well as electric potential drop remain practically unchanged.

  12. Radiation in Particle Simulations

    Energy Technology Data Exchange (ETDEWEB)

    More, R; Graziani, F; Glosli, J; Surh, M

    2010-11-19

    Hot dense radiative (HDR) plasmas common to Inertial Confinement Fusion (ICF) and stellar interiors have high temperature (a few hundred eV to tens of keV), high density (tens to hundreds of g/cc) and high pressure (hundreds of megabars to thousands of gigabars). Typically, such plasmas undergo collisional, radiative, atomic and possibly thermonuclear processes. In order to describe HDR plasmas, computational physicists in ICF and astrophysics use atomic-scale microphysical models implemented in various simulation codes. Experimental validation of the models used to describe HDR plasmas are difficult to perform. Direct Numerical Simulation (DNS) of the many-body interactions of plasmas is a promising approach to model validation but, previous work either relies on the collisionless approximation or ignores radiation. We present four methods that attempt a new numerical simulation technique to address a currently unsolved problem: the extension of molecular dynamics to collisional plasmas including emission and absorption of radiation. The first method applies the Lienard-Weichert solution of Maxwell's equations for a classical particle whose motion is assumed to be known. The second method expands the electromagnetic field in normal modes (planewaves in a box with periodic boundary-conditions) and solves the equation for wave amplitudes coupled to the particle motion. The third method is a hybrid molecular dynamics/Monte Carlo (MD/MC) method which calculates radiation emitted or absorbed by electron-ion pairs during close collisions. The fourth method is a generalization of the third method to include small clusters of particles emitting radiation during close encounters: one electron simultaneously hitting two ions, two electrons simultaneously hitting one ion, etc. This approach is inspired by the virial expansion method of equilibrium statistical mechanics. Using a combination of these methods we believe it is possible to do atomic-scale particle

  13. 低码率视频编码中基于对角线抽样的混合DCT算法%A Novel DS-Based Hybrid DCT for Low Bit-Rate Video Coding

    Institute of Scientific and Technical Information of China (English)

    陈志波; 何芸; 郑君里

    2001-01-01

    该文提出了一个适用于低码率视频编码的基于对角线抽样(DS- Diagonally Sampled)的混合快速DCT编码方案,此方案包含一个新的3系数DCT算法,同时提出了基于DS的计算色度SAD(Sum of Absolute Difference)的方法用于有效准确地检测全零或3系数的色度块。这一混合算法可以有效的降低DCT、IDCT、量化和反量化的运算量,提高编码器处理速度,而不会导致明显的图象质量的下降。%In this paper,a DS-Based hybrid DCT strategy is proposed,including a novel 3 coefficients DCT and an algorithm calculating chroma SAD(Sum of Absolute Difference)from Diagonally Sampled pixels is also introduced to effectively detect All-zero or Three-coefficient chroma blocks.This hybrid coding strategy efficiently decrease the computation of DCT,IDCT,quantization and inverse quantization,which achieves significant improvement in the processing speed with negligible video-quality degradation.

  14. Combustion chamber analysis code

    Science.gov (United States)

    Przekwas, A. J.; Lai, Y. G.; Krishnan, A.; Avva, R. K.; Giridharan, M. G.

    1993-05-01

    A three-dimensional, time dependent, Favre averaged, finite volume Navier-Stokes code has been developed to model compressible and incompressible flows (with and without chemical reactions) in liquid rocket engines. The code has a non-staggered formulation with generalized body-fitted-coordinates (BFC) capability. Higher order differencing methodologies such as MUSCL and Osher-Chakravarthy schemes are available. Turbulent flows can be modeled using any of the five turbulent models present in the code. A two-phase, two-liquid, Lagrangian spray model has been incorporated into the code. Chemical equilibrium and finite rate reaction models are available to model chemically reacting flows. The discrete ordinate method is used to model effects of thermal radiation. The code has been validated extensively against benchmark experimental data and has been applied to model flows in several propulsion system components of the SSME and the STME.

  15. 格雷码混合遗传算法求解0-1背包问题%Gray coded hybrid genetic algorithm for 0-1 knapsack problem

    Institute of Scientific and Technical Information of China (English)

    王则林; 吴志健

    2012-01-01

    This paper gave an athematic mode of 0-1 knapsack problem,and modified the binary coding to establish a gray coded hybrid genetic algorithm used greedy algorithm to handle with the constraint conditions, And this paper proposed a value density operator to the individual, which could improve the search effciency, used the elitism mechanism to accelerate the convergence process, The numerical experiment proves the affectivity of the algorithm.%给出0-1背包问题的数学模型,修改传统二进制编码为格雷码混合遗传算法,使用贪心算法来解决约束问题,对每个个体使用价值密度来衡量,提高了算法搜索效率,同时使用精英保留机制来加速算法收敛的速度.最后通过数值实验证明了算法的有效性.

  16. Ag-Ag2S/reduced graphene oxide hybrids used as long-wave UV radiation emitting nanocomposites

    Science.gov (United States)

    Li, Wenyao; Xu, Ruoyu; Ling, Min; He, Guanjie

    2017-10-01

    We report a facile thermal decomposition approach to synthesize Ag-Ag2S/reduced graphene oxide (Ag-Ag2S/rGO), the Ag-Ag2S nanoparticles uniformly dispersed on reduced graphene oxide with diameters of 10-20 nm. The photoluminescence spectra of Ag-Ag2S/rGO showed two obvious emission peaks at 327 and 339 nm with the excitation wavelength at 287 nm. Compared with Ag-Ag2S heterostructured clusters with two peaks at 407 and 430 nm, it showed a big blue shift and higher intensity, which makes it a novel candidate for long-wave UV radiation emitting nanocomposite.

  17. Radiation in Particle Simulations

    Energy Technology Data Exchange (ETDEWEB)

    More, R M; Graziani, F R; Glosli, J; Surh, M

    2009-06-15

    Hot dense radiative (HDR) plasmas common to Inertial Confinement Fusion (ICF) and stellar interiors have high temperature (a few hundred eV to tens of keV), high density (tens to hundreds of g/cc) and high pressure (hundreds of Megabars to thousands of Gigabars). Typically, such plasmas undergo collisional, radiative, atomic and possibly thermonuclear processes. In order to describe HDR plasmas, computational physicists in ICF and astrophysics use atomic-scale microphysical models implemented in various simulation codes. Experimental validation of the models used to describe HDR plasmas are difficult to perform. Direct Numerical Simulation (DNS) of the many-body interactions of plasmas is a promising approach to model validation but, previous work either relies on the collisionless approximation or ignores radiation. We present four methods that attempt a new numerical simulation technique to address a currently unsolved problem: the extension of molecular dynamics to collisional plasmas including emission and absorption of radiation. The first method applies the Lienard-Weichert solution of Maxwell's equations for a classical particle whose motion is assumed to be known (section 3). The second method expands the electromagnetic field in normal modes (plane-waves in a box with periodic boundary-conditions) and solves the equation for wave amplitudes coupled to the particle motion (section 4). The third method is a hybrid MD/MC (molecular dynamics/Monte Carlo) method which calculates radiation emitted or absorbed by electron-ion pairs during close collisions (section 5). The fourth method is a generalization of the third method to include small clusters of particles emitting radiation during close encounters: one electron simultaneously hitting two ions, two electrons simultaneously hitting one ion, etc.(section 6). This approach is inspired by the Virial expansion method of equilibrium statistical mechanics.

  18. Optimization of hybrid iterative reconstruction level and evaluation of image quality and radiation dose for pediatric cardiac computed tomography angiography

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Lin; Liang, Changhong [Southern Medical University, Guangzhou (China); Guangdong Academy of Medical Sciences, Dept. of Radiology, Guangdong General Hospital, Guangzhou (China); Zhuang, Jian [Guangdong Academy of Medical Sciences, Dept. of Cardiac Surgery, Guangdong Cardiovascular Inst., Guangdong Provincial Key Lab. of South China Structural Heart Disease, Guangdong General Hospital, Guangzhou (China); Huang, Meiping [Guangdong Academy of Medical Sciences, Dept. of Radiology, Guangdong General Hospital, Guangzhou (China); Guangdong Academy of Medical Sciences, Dept. of Catheterization Lab, Guangdong Cardiovascular Inst., Guangdong Provincial Key Lab. of South China Structural Heart Disease, Guangdong General Hospital, Guangzhou (China); Liu, Hui [Guangdong Academy of Medical Sciences, Dept. of Radiology, Guangdong General Hospital, Guangzhou (China)

    2017-01-15

    Hybrid iterative reconstruction can reduce image noise and produce better image quality compared with filtered back-projection (FBP), but few reports describe optimization of the iteration level. We optimized the iteration level of iDose{sup 4} and evaluated image quality for pediatric cardiac CT angiography. Children (n = 160) with congenital heart disease were enrolled and divided into full-dose (n = 84) and half-dose (n = 76) groups. Four series were reconstructed using FBP, and iDose{sup 4} levels 2, 4 and 6; we evaluated subjective quality of the series using a 5-grade scale and compared the series using a Kruskal-Wallis H test. For FBP and iDose{sup 4}-optimal images, we compared contrast-to-noise ratios (CNR) and size-specific dose estimates (SSDE) using a Student's t-test. We also compared diagnostic-accuracy of each group using a Kruskal-Wallis H test. Mean scores for iDose{sup 4} level 4 were the best in both dose groups (all P < 0.05). CNR was improved in both groups with iDose{sup 4} level 4 as compared with FBP. Mean decrease in SSDE was 53% in the half-dose group. Diagnostic accuracy for the four datasets were in the range 92.6-96.2% (no statistical difference). iDose{sup 4} level 4 was optimal for both the full- and half-dose groups. Protocols with iDose{sup 4} level 4 allowed 53% reduction in SSDE without significantly affecting image quality and diagnostic accuracy. (orig.)

  19. SU-E-T-20: A Novel Hybrid CBCT, Bioluminescence and Fluorescence Tomography System for Preclinical Radiation Research

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, B; Eslami, S; Iordachita, I [Johns Hopkins University, Baltimore, Maryland (United States); Yang, Y [University of Miami School of Medicine, Miami, FL (United States); Patterson, M [Hamilton Regional Cancer Ctr., Hamilton, ON (Canada); Wong, J [Johns Hopkins University, Baltimore, MD (United States); Wang, K [Johns Hopkins Hospital, Baltimore, MD (United States)

    2014-06-01

    Purpose: A novel standalone bioluminescence and fluorescence tomography (BLT and FT) system equipped with high resolution CBCT has been built in our group. In this work, we present the system calibration method and validate our system in both phantom and in vivo environment. Methods: The CBCT is acquired by rotating the animal stage while keeping the x-ray source and detector panel static. The optical signal is reflected by the 3-mirror system to a multispectral filter set and then delivered to the CCD camera with f/1.4 lens mounted. Nine fibers passing through the stage and in contact with the mouse skin serve as the light sources for diffuse optical tomography (DOT) and FT. The anatomical information and optical properties acquired from the CBCT and DOT, respectively, are used as the priori information to improve the BLT/FT reconstruction accuracy. Flat field correction for the optical system was acquired at multiple wavelengths. A home-built phantom is used to register the optical and CBCT coordinates. An absolute calibration relating the CCD photon counts rate to the light fluence rate emitted at animal surface was developed to quantify the bioluminescence power or fluorophore concentration. Results: An optical inhomogeneous phantom with 2 light sources (3mm separation) imbedded is used to test the system. The optical signal is mapped onto the mesh generated from CBCT for optical reconstruction. Our preliminary results show that the center of mass can be reconstructed within 2.8mm accuracy. A live mouse with the light source imbedded is also used to validate our system. Liver or lung metastatic luminescence tumor model will be used for further testing. Conclusion: This hybrid system transforms preclinical research to a level that even sub-palpable volume of cells can be imaged rapidly and non-invasively, which largely extends the scope of radiobiological research. The research is supported by the NCI grant R01CA158100-01.

  20. A radiation hybrid map of the European sea bass (Dicentrarchus labrax) based on 1581 markers: Synteny analysis with model fish genomes.

    Science.gov (United States)

    Guyon, Richard; Senger, Fabrice; Rakotomanga, Michaelle; Sadequi, Naoual; Volckaert, Filip A M; Hitte, Christophe; Galibert, Francis

    2010-10-01

    The selective breeding of fish for aquaculture purposes requires the understanding of the genetic basis of traits such as growth, behaviour, resistance to pathogens and sex determinism. Access to well-developed genomic resources is a prerequisite to improve the knowledge of these traits. Having this aim in mind, a radiation hybrid (RH) panel of European sea bass (Dicentrarchus labrax) was constructed from splenocytes irradiated at 3000 rad, allowing the construction of a 1581 marker RH map. A total of 1440 gene markers providing ~4400 anchors with the genomes of three-spined stickleback, medaka, pufferfish and zebrafish, helped establish synteny relationships with these model species. The identification of Conserved Segments Ordered (CSO) between sea bass and model species allows the anticipation of the position of any sea bass gene from its location in model genomes. Synteny relationships between sea bass and gilthead seabream were addressed by mapping 37 orthologous markers. The sea bass genetic linkage map was integrated in the RH map through the mapping of 141 microsatellites. We are thus able to present the first complete gene map of sea bass. It will facilitate linkage studies and the identification of candidate genes and Quantitative Trait Loci (QTL). The RH map further positions sea bass as a genetic and evolutionary model of Perciformes and supports their ongoing aquaculture expansion.

  1. Coding Partitions

    Directory of Open Access Journals (Sweden)

    Fabio Burderi

    2007-05-01

    Full Text Available Motivated by the study of decipherability conditions for codes weaker than Unique Decipherability (UD, we introduce the notion of coding partition. Such a notion generalizes that of UD code and, for codes that are not UD, allows to recover the ``unique decipherability" at the level of the classes of the partition. By tacking into account the natural order between the partitions, we define the characteristic partition of a code X as the finest coding partition of X. This leads to introduce the canonical decomposition of a code in at most one unambiguouscomponent and other (if any totally ambiguouscomponents. In the case the code is finite, we give an algorithm for computing its canonical partition. This, in particular, allows to decide whether a given partition of a finite code X is a coding partition. This last problem is then approached in the case the code is a rational set. We prove its decidability under the hypothesis that the partition contains a finite number of classes and each class is a rational set. Moreover we conjecture that the canonical partition satisfies such a hypothesis. Finally we consider also some relationships between coding partitions and varieties of codes.

  2. Implementation of a hybrid particle code with a PIC description in r–z and a gridless description in ϕ into OSIRIS

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, A., E-mail: davidsoa@physics.ucla.edu [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Tableman, A., E-mail: Tableman@physics.ucla.edu [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); An, W., E-mail: anweiming@ucla.edu [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Tsung, F.S., E-mail: tsung@physics.ucla.edu [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Lu, W., E-mail: luwei@ucla.edu [Department of Electrical Engineering, University of California, Los Angeles, CA 90095 (United States); Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); Vieira, J., E-mail: jorge.vieira@ist.utl.pt [GoLP/Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisbon (Portugal); Fonseca, R.A., E-mail: ricardo.fonseca@iscte.pt [GoLP/Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisbon (Portugal); Departamento Ciências e Tecnologias da Informação, ISCTE – Instituto Universitário de Lisboa, 1649-026 Lisboa (Portugal); Silva, L.O., E-mail: luis.silva@ist.utl.pt [GoLP/Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisbon (Portugal); Mori, W.B., E-mail: mori@physics.ucla.edu [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Department of Electrical Engineering, University of California, Los Angeles, CA 90095 (United States)

    2015-01-15

    For many plasma physics problems, three-dimensional and kinetic effects are very important. However, such simulations are very computationally intensive. Fortunately, there is a class of problems for which there is nearly azimuthal symmetry and the dominant three-dimensional physics is captured by the inclusion of only a few azimuthal harmonics. Recently, it was proposed [1] to model one such problem, laser wakefield acceleration, by expanding the fields and currents in azimuthal harmonics and truncating the expansion. The complex amplitudes of the fundamental and first harmonic for the fields were solved on an r–z grid and a procedure for calculating the complex current amplitudes for each particle based on its motion in Cartesian geometry was presented using a Marder's correction to maintain the validity of Gauss's law. In this paper, we describe an implementation of this algorithm into OSIRIS using a rigorous charge conserving current deposition method to maintain the validity of Gauss's law. We show that this algorithm is a hybrid method which uses a particles-in-cell description in r–z and a gridless description in ϕ. We include the ability to keep an arbitrary number of harmonics and higher order particle shapes. Examples for laser wakefield acceleration, plasma wakefield acceleration, and beam loading are also presented and directions for future work are discussed.

  3. 基于提升小波的地形数据混合熵编码压缩与实时渲染%Terrain Data Hybrid Entropy Coding Compression Based on Lifting Wavelet and Real-time Rendering

    Institute of Scientific and Technical Information of China (English)

    郭浩然; 庞建民

    2012-01-01

    High resolution terrain Digital Elevation Model (DEM) and orthophoto bring severely load including data storage, schedule and real-time rendering, etc.. A high performance terrain data compression method is proposed based on lifting wavelet transform and parallel hybrid entropy codec, and combined with Graphics Process Unit (GPU) Ray-casting to achieve large-scale 3D terrain visualization. First, the multi-resolution wavelet transform model of terrain tile is constructed to map the refinement and simplification operation. Then the multi-resolution quadtree of DEM and terrain texture is built separately based on lifting wavelet transform, the sparse wavelet coefficient generated from quantization is compressed by a hybrid entropy codec which combined with parallel run-length coding and variable-length Huffman coding. The compressed data are organized into progressive stream to do real-time decoding and rendering. The present lifting wavelet transform and hybrid entropy codec is implemented by Compute Unified Device Architecture (CUDA) in GPU. Experiment results show that the data compression ratio is effective with this method, PSNR and code-decode data throughput. High Frames Per Second (FPS) in real-time rendering satisfied the demand of interactive visualization.%高分辨率地形高程和影像数据给交互式3维地形可视化应用带来沉重压力,主要体现在数据存储、调度传输及实时渲染等方面.该文设计一种基于提升小波变换与并行混合熵编码的地形数据高性能压缩方法,并结合图形处理器(Graphics Process Unit,GPU)Ray-casting实现大规模3维地形可视化.首先建立多分辨率地形块的小波变换模型来映射其求精和化简操作;其次,基于提升小波变换分别构建格网数字高程模型(Digital Elevation Model,DEM)和地表纹理的多分辨率四叉树,对量化后的稀疏小波系数引入并行游程编码与并行变长霍夫曼编码相结合的混合熵编码进行压

  4. Hybrid Fast Search Algorithm Based on Multiview Video Coding%多视点视频编码混合快速搜索算法

    Institute of Scientific and Technical Information of China (English)

    雷海军; 杨辉; 杨张; 袁梅冷

    2013-01-01

    EPZS是联合多视点视频编码(JMVC,Joint Multi-view Video Coding)运动估计中采用的一种预测搜索算法,其搜索速度慢.针对EPZS算法的性能不足,我们在预测矢量集合、搜索模型、阈值设置和搜索策略四个方面进行改进,提出了一种混合快速搜索算法.在联合多视点视频编码测试平台JMVC8.3中,对三个由平行摄像机采集的多视点视频测试序列BallRoom、Exit和Vassar进行测试.实验结果表明:在保证视频重建质量和码率的前提下,与Jmvc中的EPZS算法相比,编码速度平均提高了55.66% ~69.62%,改进算法的效果明显,编码效率得以提高.

  5. SU-E-T-13: A Feasibility Study of the Use of Hybrid Computational Phantoms for Improved Historical Dose Reconstruction in the Study of Late Radiation Effects for Hodgkin's Lymphoma

    Energy Technology Data Exchange (ETDEWEB)

    Petroccia, H; O' Reilly, S; Bolch, W [J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL (United States); Mendenhall, N; Li, Z; Slopsema, R [Radiation Oncology, University of Florida Proton Therapy Institute, Jacksonville, FL (United States)

    2014-06-01

    Purpose: Radiation-induced cancer effects are well-documented following radiotherapy. Further investigation is needed to more accurately determine a dose-response relationship for late radiation effects. Recent dosimetry studies tend to use representative patients (Taylor 2009) or anthropomorphic phantoms (Wirth 2008) for estimating organ mean doses. In this study, we compare hybrid computational phantoms to patient-specific voxel phantoms to test the accuracy of University of Florida Hybrid Phantom Library (UFHP Library) for historical dose reconstructions. Methods: A cohort of 10 patients with CT images was used to reproduce the data that was collected historically for Hodgkin's lymphoma patients (i.e. caliper measurements and photographs). Four types of phantoms were generated to show a range of refinement from reference hybrid-computational phantom to patient-specific phantoms. Each patient is matched to a reference phantom from the UFHP Library based on height and weight. The reference phantom is refined in the anterior/posterior direction to create a ‘caliper-scaled phantom’. A photograph is simulated using a surface rendering from segmented CT images. Further refinement in the lateral direction is performed using ratios from a simulated-photograph to create a ‘photograph and caliper-scaled phantom’; breast size and position is visually adjusted. Patient-specific hybrid phantoms, with matched organ volumes, are generated and show the capabilities of the UF Hybrid Phantom Library. Reference, caliper-scaled, photograph and caliper-scaled, and patient-specific hybrid phantoms are compared with patient-specific voxel phantoms to determine the accuracy of the study. Results: Progression from reference phantom to patient specific hybrid shows good agreement with the patient specific voxel phantoms. Each stage of refinement shows an overall trend of improvement in dose accuracy within the study, which suggests that computational phantoms can show

  6. Study of coupled double diffusive convection-radiation in a tilted cavity via a hybrid multi-relaxation time-lattice Boltzmann-finite difference and discrete ordinate methods

    Science.gov (United States)

    Moufekkir, Fayçal; Moussaoui, Mohammed Amine; Mezrhab, Ahmed; Naji, Hassan

    2015-04-01

    The coupled double diffusive natural convection and radiation in a tilted and differentially heated square cavity containing a non-gray air-CO2 (or air-H2O) mixtures was numerically investigated. The horizontal walls are insulated and impermeable and the vertical walls are maintained at different temperatures and concentrations. The hybrid lattice Boltzmann method with the multiple-relaxation time model is used to compute the hydrodynamics and the finite difference method to determine temperatures and concentrations. The discrete ordinates method combined to the spectral line-based weighted sum of gray gases model is used to compute the radiative term and its spectral aspect. The effects of the inclination angle on the flow, thermal and concentration fields are analyzed for both aiding and opposing cases. It was found that radiation gas modifies the structure of the velocity and thermal fields by generating inclined stratifications and promoting the instabilities in opposing flows.

  7. Holographic codes

    CERN Document Server

    Latorre, Jose I

    2015-01-01

    There exists a remarkable four-qutrit state that carries absolute maximal entanglement in all its partitions. Employing this state, we construct a tensor network that delivers a holographic many body state, the H-code, where the physical properties of the boundary determine those of the bulk. This H-code is made of an even superposition of states whose relative Hamming distances are exponentially large with the size of the boundary. This property makes H-codes natural states for a quantum memory. H-codes exist on tori of definite sizes and get classified in three different sectors characterized by the sum of their qutrits on cycles wrapped through the boundaries of the system. We construct a parent Hamiltonian for the H-code which is highly non local and finally we compute the topological entanglement entropy of the H-code.

  8. Collection of legislative and regulatory arrangements relative to radiation protection. Part 1: laws and decrees of the Public Health Code and Labour Code concerning the protection of populations, patients and workers against the risks of ionizing radiations; Recueil des dispositions legislatives et reglementaires relatives a la radioprotection. Partie 1: lois et decrets du code de la sante publique et du code du travail concernant la protection de la population, des patients et des travailleurs contre les dangers des rayonnements ionisants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-05-15

    This collection concerns on one hand the protection of the population and on the other hand the protection of the workers against ionizing radiations. As regards the protection of the populations, there is a quality control of waters, a control of the medical devices for the protection of patients. For the protection of the workers it is the employment law which serves as reference. (N.C.)

  9. Investigation of the Magnetotail and Inner Magnetosphere with Combined Global Hybrid and CIMI Models

    Science.gov (United States)

    Lin, Y.; Wang, X.; Perez, J. D.; Fok, M. C. H.

    2014-12-01

    The interconnection between the Earth's inner and outer magnetospheric regions is calculated by coupling an existing 3-D global hybrid simulation code to an existing ring current and radiation belt code, the Comprehensive Inner Magnetosphere/Ionosphere (CIMI) model. In the hybrid simulation, the global dynamics are driven by the solar wind and a southward IMF, and the simulation domain includes the plasma regions from x=-60RE to +20RE . Evolution of the magnetotail is revealed in the hybrid simulation. The response of the ring current and radiation belts is calculated by coupling the CIMI model to the global hybrid model. The hybrid simulation results provide the CIMI model with the magnetic field and electric potential at the high-latitude ionosphere boundary and plasma density and full ion phase space distribution function at the outer boundary at the equator. Our simulation shows that the ion velocity distributions in the tail are non-Maxwellian, with the existence of multiple ion beams, which have a significant impact on the ring current and the convection electric field. Detailed results will be presented for cases with various IMF and solar wind conditions, and the simulation will be compared with satellite observations.

  10. Sharing code

    OpenAIRE

    Kubilius, Jonas

    2014-01-01

    Sharing code is becoming increasingly important in the wake of Open Science. In this review I describe and compare two popular code-sharing utilities, GitHub and Open Science Framework (OSF). GitHub is a mature, industry-standard tool but lacks focus towards researchers. In comparison, OSF offers a one-stop solution for researchers but a lot of functionality is still under development. I conclude by listing alternative lesser-known tools for code and materials sharing.

  11. A hybrid method using the widely-used WIEN2k and VASP codes to calculate the complete set of XAS/EELS edges in a hundred-atoms system.

    Science.gov (United States)

    Donval, Gaël; Moreau, Philippe; Danet, Julien; Larbi, Séverine Jouanneau-Si; Bayle-Guillemaud, Pascale; Boucher, Florent

    2017-01-04

    Most of the recent developments in EELS modelling has been focused on getting a better agreement with measurements. Less work however has been dedicated to bringing EELS calculations to larger structures that can more realistically describe actual systems. The purpose of this paper is to present a hybrid approach well adapted to calculating the whole set of localised EELS core-loss edges (at the XAS level of theory) on larger systems using only standard tools, namely the WIEN2k and VASP codes. We illustrate the usefulness of this method by applying it to a set of amorphous silicon structures in order to explain the flattening of the silicon L2,3 EELS edge peak at the onset. We show that the peak flattening is actually caused by the collective contribution of each of the atoms to the average spectrum, as opposed to a flattening occurring on each individual spectrum. This method allowed us to reduce the execution time by a factor of 3 compared to a usual-carefully optimised-WIEN2k calculation. It provided even greater speed-ups on more complex systems (interfaces, ∼300 atoms) that will be presented in a future paper. This method is suited to calculate all the localized edges of all the atoms of a structure in a single calculation for light atoms as long as the core-hole effects can be neglected.

  12. 基于多种技术的混合式程序代码抄袭检测方法%Hybrid plagiarism detection method in program code based on multiple techniques

    Institute of Scientific and Technical Information of China (English)

    杨超

    2016-01-01

    Based on analyzing characteristics and drawbacks of the existing plagiarism detection system in program code, a hybrid plagiarism detection method combining text analysis, structure metrics and attribute counting is proposed. Firstly, the document fingerprinting technology and Winnowing algorithm are used to compute text similarity. Secondly, the program code is translated to a Dynamic Control Structure tree(DCS), and Winnowing algorithm is applied to estimate the DCS tree similarity which is structural similarity also. Then each variable information in code is collected and counted. The variable similarity algorithm is applied to analyze variable information node and get variable similarity. Finally, the text similarity, structural similarity and variable similarity are assigned a weight to compute the total code similarity. The experi-mental results show that the proposed method can effectively detect all kinds of plagiarism. To the different threshold values, the accuracy and the recall ratio of test results are higher than JPLAG system. Especially for the simple structure in program code, the average accuracy of testing results of the method and JPLAG system are 82.5%and 69.5%respectively. Conse-quently it shows that the proposed method is more effective.%在分析现有程序代码抄袭检测系统的特点及局限性的基础上,提出一种综合文本分析、结构度量和属性计数技术的混合式程序抄袭检测方法。应用文档指纹技术和Winnowing算法计算程序的文本相似度;将程序代码表示成动态控制结构树(Dynamic Control Structure tree,DCS),运用Winnowing算法计算DCS树相似度,从而得到结构相似度;收集并统计程序中的每个变量信息,应用变量相似度算法分析变量信息节点获取变量相似度;分别赋予文本相似度、结构相似度和变量相似度一个权值,计算得到总体的代码相似度。实验结果表明,所提出的方法能够有效

  13. Quality control of the treatment planning systems dose calculations in external radiation therapy using the Penelope Monte Carlo code; Controle qualite des systemes de planification dosimetrique des traitements en radiotherapie externe au moyen du code Monte-Carlo Penelope

    Energy Technology Data Exchange (ETDEWEB)

    Blazy-Aubignac, L

    2007-09-15

    The treatment planning systems (T.P.S.) occupy a key position in the radiotherapy service: they realize the projected calculation of the dose distribution and the treatment duration. Traditionally, the quality control of the calculated distribution doses relies on their comparisons with dose distributions measured under the device of treatment. This thesis proposes to substitute these dosimetry measures to the profile of reference dosimetry calculations got by the Penelope Monte-Carlo code. The Monte-Carlo simulations give a broad choice of test configurations and allow to envisage a quality control of dosimetry aspects of T.P.S. without monopolizing the treatment devices. This quality control, based on the Monte-Carlo simulations has been tested on a clinical T.P.S. and has allowed to simplify the quality procedures of the T.P.S.. This quality control, in depth, more precise and simpler to implement could be generalized to every center of radiotherapy. (N.C.)

  14. Speaking Code

    DEFF Research Database (Denmark)

    Cox, Geoff

    Speaking Code begins by invoking the “Hello World” convention used by programmers when learning a new language, helping to establish the interplay of text and code that runs through the book. Interweaving the voice of critical writing from the humanities with the tradition of computing and software...

  15. Polar Codes

    Science.gov (United States)

    2014-12-01

    QPSK Gaussian channels . .......................................................................... 39 vi 1. INTRODUCTION Forward error correction (FEC...Capacity of BSC. 7 Figure 5. Capacity of AWGN channel . 8 4. INTRODUCTION TO POLAR CODES Polar codes were introduced by E. Arikan in [1]. This paper...Under authority of C. A. Wilgenbusch, Head ISR Division EXECUTIVE SUMMARY This report describes the results of the project “More reliable wireless

  16. Confocal coded aperture imaging

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, Jr., Kenneth William (Harriman, TN); Thomas, Jr., Clarence E. (Knoxville, TN)

    2001-01-01

    A method for imaging a target volume comprises the steps of: radiating a small bandwidth of energy toward the target volume; focusing the small bandwidth of energy into a beam; moving the target volume through a plurality of positions within the focused beam; collecting a beam of energy scattered from the target volume with a non-diffractive confocal coded aperture; generating a shadow image of said aperture from every point source of radiation in the target volume; and, reconstructing the shadow image into a 3-dimensional image of the every point source by mathematically correlating the shadow image with a digital or analog version of the coded aperture. The method can comprise the step of collecting the beam of energy scattered from the target volume with a Fresnel zone plate.

  17. The Phantom SPH code

    Science.gov (United States)

    Price, Daniel; Wurster, James; Nixon, Chris

    2016-05-01

    I will present the capabilities of the Phantom SPH code for global simulations of dust and gas in protoplanetary discs. I will present our new algorithms for simulating both small and large grains in discs, as well as our progress towards simulating evolving grain populations and coupling with radiation. Finally, I will discuss our recent applications to HL Tau and the physics of dust gap opening.

  18. Inner Radiation Belt Representation of the Energetic Electron Environment: Model and Data Synthesis Using the Salammbo Radiation Belt Transport Code and Los Alamos Geosynchronous and GPS Energetic Particle Data

    Science.gov (United States)

    Friedel, R. H. W.; Bourdarie, S.; Fennell, J.; Kanekal, S.; Cayton, T. E.

    2004-01-01

    The highly energetic electron environment in the inner magnetosphere (GEO inward) has received a lot of research attention in resent years, as the dynamics of relativistic electron acceleration and transport are not yet fully understood. These electrons can cause deep dielectric charging in any space hardware in the MEO to GEO region. We use a new and novel approach to obtain a global representation of the inner magnetospheric energetic electron environment, which can reproduce the absolute environment (flux) for any spacecraft orbit in that region to within a factor of 2 for the energy range of 100 KeV to 5 MeV electrons, for any levels of magnetospheric activity. We combine the extensive set of inner magnetospheric energetic electron observations available at Los Alamos with the physics based Salammbo transport code, using the data assimilation technique of "nudging". This in effect input in-situ data into the code and allows the diffusion mechanisms in the code to interpolate the data into regions and times of no data availability. We present here details of the methods used, both in the data assimilation process and in the necessary inter-calibration of the input data used. We will present sample runs of the model/data code and compare the results to test spacecraft data not used in the data assimilation process.

  19. Space-Time radar waveforms: circulating codes

    NARCIS (Netherlands)

    Babur, G.; Aubry, P.; Le Chevalier, F.

    2013-01-01

    This paper describes a concept of the circulating codes covering the whole class of the space-time codes. The circulating codes do not narrow the radiated pattern of the antenna array, thus providing a wide angular coverage, possibly tunable. In turn, the beam-forming on transmit is achievable by me

  20. Hybrid2: The hybrid system simulation model, Version 1.0, user manual

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, E.I.

    1996-06-01

    In light of the large scale desire for energy in remote communities, especially in the developing world, the need for a detailed long term performance prediction model for hybrid power systems was seen. To meet these ends, engineers from the National Renewable Energy Laboratory (NREL) and the University of Massachusetts (UMass) have spent the last three years developing the Hybrid2 software. The Hybrid2 code provides a means to conduct long term, detailed simulations of the performance of a large array of hybrid power systems. This work acts as an introduction and users manual to the Hybrid2 software. The manual describes the Hybrid2 code, what is included with the software and instructs the user on the structure of the code. The manual also describes some of the major features of the Hybrid2 code as well as how to create projects and run hybrid system simulations. The Hybrid2 code test program is also discussed. Although every attempt has been made to make the Hybrid2 code easy to understand and use, this manual will allow many organizations to consider the long term advantages of using hybrid power systems instead of conventional petroleum based systems for remote power generation.

  1. Physics-based Radiator Design, Sizing & Weight Estimation Tool for Conceptual Design of More-, Hybrid-, and All-Electric Next Gen Aircraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Hybrid electric distributed propulsion (HEDP) systems have proven worthy for further consideration by approaching NASA's goals for N+2 and N+3 energy consumption,...

  2. Cardiac hybrid imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gaemperli, Oliver [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); University Hospital Zurich, Nuclear Cardiology, Cardiovascular Center, Zurich (Switzerland); Kaufmann, Philipp A. [University Hospital Zurich, Cardiac Imaging, Zurich (Switzerland); Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland)

    2014-05-15

    Hybrid cardiac single photon emission computed tomography (SPECT)/CT imaging allows combined assessment of anatomical and functional aspects of cardiac disease. In coronary artery disease (CAD), hybrid SPECT/CT imaging allows detection of coronary artery stenosis and myocardial perfusion abnormalities. The clinical value of hybrid imaging has been documented in several subsets of patients. In selected groups of patients, hybrid imaging improves the diagnostic accuracy to detect CAD compared to the single imaging techniques. Additionally, this approach facilitates functional interrogation of coronary stenoses and guidance with regard to revascularization procedures. Moreover, the anatomical information obtained from CT coronary angiography or coronary artery calcium scores (CACS) adds prognostic information over perfusion data from SPECT. The use of cardiac hybrid imaging has been favoured by the dissemination of dedicated hybrid systems and the release of dedicated image fusion software, which allow simple patient throughput for hybrid SPECT/CT studies. Further technological improvements such as more efficient detector technology to allow for low-radiation protocols, ultra-fast image acquisition and improved low-noise image reconstruction algorithms will be instrumental to further promote hybrid SPECT/CT in research and clinical practice. (orig.)

  3. Fluence to absorbed dose, effective dose and gray equivalent conversion coefficients for iron nuclei from 10 MeV to 1 TeV, calculated using Monte Carlo radiation transport code MCNPX 2.7.A.

    Science.gov (United States)

    Copeland, Kyle; Parker, Donald E; Friedberg, Wallace

    2010-03-01

    Conversion coefficients have been calculated for fluence-to-absorbed dose, fluence-to-effective dose and fluence-to-gray equivalent for isotropic exposure of an adult male and an adult female to (56)Fe(26+) in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). The coefficients were calculated using Monte Carlo transport code MCNPX 2.7.A and BodyBuilder 1.3 anthropomorphic phantoms modified to allow calculation of effective dose using tissues and tissue weighting factors from either the 1990 or 2007 recommendations of the International Commission on Radiological Protection (ICRP) and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. Calculations using ICRP 2007 recommendations result in fluence-to-effective dose conversion coefficients that are almost identical at most energies to those calculated using ICRP 1990 recommendations.

  4. Alpha particles at energies of 10 MeV to 1 TeV: conversion coefficients for fluence-to-absorbed dose, effective dose, and gray equivalent, calculated using Monte Carlo radiation transport code MCNPX 2.7.A.

    Science.gov (United States)

    Copeland, Kyle; Parker, Donald E; Friedberg, Wallace

    2010-03-01

    Conversion coefficients have been calculated for fluence to absorbed dose, fluence to effective dose and fluence to gray equivalent, for isotropic exposure to alpha particles in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). The coefficients were calculated using Monte Carlo transport code MCNPX 2.7.A and BodyBuilder 1.3 anthropomorphic phantoms modified to allow calculation of effective dose to a Reference Person using tissues and tissue weighting factors from 1990 and 2007 recommendations of the International Commission on Radiological Protection (ICRP) and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. Coefficients for effective dose are within 30 % of those calculated using ICRP 1990 recommendations.

  5. Speech coding

    Energy Technology Data Exchange (ETDEWEB)

    Ravishankar, C., Hughes Network Systems, Germantown, MD

    1998-05-08

    Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental change in infrastructure. Such a requirement could not have been easily met without the advent of digital transmission systems, thereby requiring speech to be coded digitally. The term Speech Coding is often referred to techniques that represent or code speech signals either directly as a waveform or as a set of parameters by analyzing the speech signal. In either case, the codes are transmitted to the distant end where speech is reconstructed or synthesized using the received set of codes. A more generic term that is applicable to these techniques that is often interchangeably used with speech coding is the term voice coding. This term is more generic in the sense that the

  6. Deuterons at energies of 10 MeV to 1 TeV: conversion coefficients for fluence-to-absorbed dose, equivalent dose, effective dose and gray equivalent, calculated using Monte Carlo radiation transport code MCNPX 2.7.C.

    Science.gov (United States)

    Copeland, Kyle; Parker, Donald E; Friedberg, Wallace

    2011-01-01

    Conversion coefficients were calculated for fluence-to-absorbed dose, fluence-to-equivalent dose, fluence-to-effective dose and fluence-to-gray equivalent for isotropic exposure of an adult female and an adult male to deuterons ((2)H(+)) in the energy range 10 MeV-1 TeV (0.01-1000 GeV). Coefficients were calculated using the Monte Carlo transport code MCNPX 2.7.C and BodyBuilder™ 1.3 anthropomorphic phantoms. Phantoms were modified to allow calculation of the effective dose to a Reference Person using tissues and tissue weighting factors from 1990 and 2007 recommendations of the International Commission on Radiological Protection (ICRP) and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. Coefficients for the equivalent and effective dose incorporated a radiation weighting factor of 2. At 15 of 19 energies for which coefficients for the effective dose were calculated, coefficients based on ICRP 1990 and 2007 recommendations differed by <3%. The greatest difference, 47%, occurred at 30 MeV.

  7. Speaking Code

    DEFF Research Database (Denmark)

    Cox, Geoff

    ; alternatives to mainstream development, from performances of the live-coding scene to the organizational forms of commons-based peer production; the democratic promise of social media and their paradoxical role in suppressing political expression; and the market’s emptying out of possibilities for free...... development, Speaking Code unfolds an argument to undermine the distinctions between criticism and practice, and to emphasize the aesthetic and political aspects of software studies. Not reducible to its functional aspects, program code mirrors the instability inherent in the relationship of speech...... expression in the public realm. The book’s line of argument defends language against its invasion by economics, arguing that speech continues to underscore the human condition, however paradoxical this may seem in an era of pervasive computing....

  8. HERO - A 3D general relativistic radiative post-processor for accretion discs around black holes

    Science.gov (United States)

    Zhu, Yucong; Narayan, Ramesh; Sadowski, Aleksander; Psaltis, Dimitrios

    2015-08-01

    HERO (Hybrid Evaluator for Radiative Objects) is a 3D general relativistic radiative transfer code which has been tailored to the problem of analysing radiation from simulations of relativistic accretion discs around black holes. HERO is designed to be used as a post-processor. Given some fixed fluid structure for the disc (i.e. density and velocity as a function of position from a hydrodynamic or magnetohydrodynamic simulation), the code obtains a self-consistent solution for the radiation field and for the gas temperatures using the condition of radiative equilibrium. The novel aspect of HERO is that it combines two techniques: (1) a short-characteristics (SC) solver that quickly converges to a self-consistent disc temperature and radiation field, with (2) a long-characteristics (LC) solver that provides a more accurate solution for the radiation near the photosphere and in the optically thin regions. By combining these two techniques, we gain both the computational speed of SC and the high accuracy of LC. We present tests of HERO on a range of 1D, 2D, and 3D problems in flat space and show that the results agree well with both analytical and benchmark solutions. We also test the ability of the code to handle relativistic problems in curved space. Finally, we discuss the important topic of ray defects, a major limitation of the SC method, and describe our strategy for minimizing the induced error.

  9. An Overview of the Monte Carlo Methods, Codes, & Applications Group

    Energy Technology Data Exchange (ETDEWEB)

    Trahan, Travis John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-30

    This report sketches the work of the Group to deliver first-principle Monte Carlo methods, production quality codes, and radiation transport-based computational and experimental assessments using the codes MCNP and MCATK for such applications as criticality safety, non-proliferation, nuclear energy, nuclear threat reduction and response, radiation detection and measurement, radiation health protection, and stockpile stewardship.

  10. Accelerating Climate Simulations Through Hybrid Computing

    Science.gov (United States)

    Zhou, Shujia; Sinno, Scott; Cruz, Carlos; Purcell, Mark

    2009-01-01

    Unconventional multi-core processors (e.g., IBM Cell B/E and NYIDIDA GPU) have emerged as accelerators in climate simulation. However, climate models typically run on parallel computers with conventional processors (e.g., Intel and AMD) using MPI. Connecting accelerators to this architecture efficiently and easily becomes a critical issue. When using MPI for connection, we identified two challenges: (1) identical MPI implementation is required in both systems, and; (2) existing MPI code must be modified to accommodate the accelerators. In response, we have extended and deployed IBM Dynamic Application Virtualization (DAV) in a hybrid computing prototype system (one blade with two Intel quad-core processors, two IBM QS22 Cell blades, connected with Infiniband), allowing for seamlessly offloading compute-intensive functions to remote, heterogeneous accelerators in a scalable, load-balanced manner. Currently, a climate solar radiation model running with multiple MPI processes has been offloaded to multiple Cell blades with approx.10% network overhead.

  11. The Aster code; Code Aster

    Energy Technology Data Exchange (ETDEWEB)

    Delbecq, J.M

    1999-07-01

    The Aster code is a 2D or 3D finite-element calculation code for structures developed by the R and D direction of Electricite de France (EdF). This dossier presents a complete overview of the characteristics and uses of the Aster code: introduction of version 4; the context of Aster (organisation of the code development, versions, systems and interfaces, development tools, quality assurance, independent validation); static mechanics (linear thermo-elasticity, Euler buckling, cables, Zarka-Casier method); non-linear mechanics (materials behaviour, big deformations, specific loads, unloading and loss of load proportionality indicators, global algorithm, contact and friction); rupture mechanics (G energy restitution level, restitution level in thermo-elasto-plasticity, 3D local energy restitution level, KI and KII stress intensity factors, calculation of limit loads for structures), specific treatments (fatigue, rupture, wear, error estimation); meshes and models (mesh generation, modeling, loads and boundary conditions, links between different modeling processes, resolution of linear systems, display of results etc..); vibration mechanics (modal and harmonic analysis, dynamics with shocks, direct transient dynamics, seismic analysis and aleatory dynamics, non-linear dynamics, dynamical sub-structuring); fluid-structure interactions (internal acoustics, mass, rigidity and damping); linear and non-linear thermal analysis; steels and metal industry (structure transformations); coupled problems (internal chaining, internal thermo-hydro-mechanical coupling, chaining with other codes); products and services. (J.S.)

  12. Hybrid2 - The hybrid power system simulation model

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, E.I.; Green, H.J.; Dijk, V.A.P. van [National Renewable Energy Lab., Golden, CO (United States); Manwell, J.F. [Univ. of Massachusetts, Amherst, MA (United States)

    1996-12-31

    There is a large-scale need and desire for energy in remote communities, especially in the developing world; however the lack of a user friendly, flexible performance prediction model for hybrid power systems incorporating renewables hindered the analysis of hybrids as options to conventional solutions. A user friendly model was needed with the versatility to simulate the many system locations, widely varying hardware configurations, and differing control options for potential hybrid power systems. To meet these ends, researchers from the National Renewable Energy Laboratory (NREL) and the University of Massachusetts (UMass) developed the Hybrid2 software. This paper provides an overview of the capabilities, features, and functionality of the Hybrid2 code, discusses its validation and future plans. Model availability and technical support provided to Hybrid2 users are also discussed. 12 refs., 3 figs., 4 tabs.

  13. Optimal codes as Tanner codes with cyclic component codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Pinero, Fernando; Zeng, Peng

    2014-01-01

    In this article we study a class of graph codes with cyclic code component codes as affine variety codes. Within this class of Tanner codes we find some optimal binary codes. We use a particular subgraph of the point-line incidence plane of A(2,q) as the Tanner graph, and we are able to describe...... the codes succinctly using Gröbner bases....

  14. Hybrid Baryons

    CERN Document Server

    Page, P R

    2003-01-01

    We review the status of hybrid baryons. The only known way to study hybrids rigorously is via excited adiabatic potentials. Hybrids can be modelled by both the bag and flux-tube models. The low-lying hybrid baryon is N 1/2^+ with a mass of 1.5-1.8 GeV. Hybrid baryons can be produced in the glue-rich processes of diffractive gamma N and pi N production, Psi decays and p pbar annihilation.

  15. Multi-bit upset aware hybrid error-correction for cache in embedded processors

    Science.gov (United States)

    Jiaqi, Dong; Keni, Qiu; Weigong, Zhang; Jing, Wang; Zhenzhen, Wang; Lihua, Ding

    2015-11-01

    For the processor working in the radiation environment in space, it tends to suffer from the single event effect on circuits and system failures, due to cosmic rays and high energy particle radiation. Therefore, the reliability of the processor has become an increasingly serious issue. The BCH-based error correction code can correct multi-bit errors, but it introduces large latency overhead. This paper proposes a hybrid error correction approach that combines BCH and EDAC to correct both multi-bit and single-bit errors for caches with low cost. The proposed technique can correct up to four-bit error, and correct single-bit error in one cycle. Evaluation results show that, the proposed hybrid error-correction scheme can improve the performance of cache accesses up to 20% compared to the pure BCH scheme.

  16. Validation of columnar CsI x-ray detector responses obtained with hybridMANTIS, a CPU-GPU Monte Carlo code for coupled x-ray, electron, and optical transport.

    Science.gov (United States)

    Sharma, Diksha; Badano, Aldo

    2013-03-01

    hybridMANTIS is a Monte Carlo package for modeling indirect x-ray imagers using columnar geometry based on a hybrid concept that maximizes the utilization of available CPU and graphics processing unit processors in a workstation. The authors compare hybridMANTIS x-ray response simulations to previously published MANTIS and experimental data for four cesium iodide scintillator screens. These screens have a variety of reflective and absorptive surfaces with different thicknesses. The authors analyze hybridMANTIS results in terms of modulation transfer function and calculate the root mean square difference and Swank factors from simulated and experimental results. The comparison suggests that hybridMANTIS better matches the experimental data as compared to MANTIS, especially at high spatial frequencies and for the thicker screens. hybridMANTIS simulations are much faster than MANTIS with speed-ups up to 5260. hybridMANTIS is a useful tool for improved description and optimization of image acquisition stages in medical imaging systems and for modeling the forward problem in iterative reconstruction algorithms.

  17. A novel hybrid ant colony optimization and particle swarm optimization algorithm for inverse problems of coupled radiative and conductive heat transfer

    National Research Council Canada - National Science Library

    Zhang Biao; Qi Hong; Sun Shuang-Cheng; Ruan Li-Ming; Tan He-Ping

    2016-01-01

    In this study, a continuous ant colony optimization algorithm on the basis of probability density function was applied to the inverse problems of one-dimensional coupled radiative and conductive heat transfer...

  18. Radiation Detection Computational Benchmark Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Shaver, Mark W.; Casella, Andrew M.; Wittman, Richard S.; McDonald, Ben S.

    2013-09-24

    Modeling forms an important component of radiation detection development, allowing for testing of new detector designs, evaluation of existing equipment against a wide variety of potential threat sources, and assessing operation performance of radiation detection systems. This can, however, result in large and complex scenarios which are time consuming to model. A variety of approaches to radiation transport modeling exist with complementary strengths and weaknesses for different problems. This variety of approaches, and the development of promising new tools (such as ORNL’s ADVANTG) which combine benefits of multiple approaches, illustrates the need for a means of evaluating or comparing different techniques for radiation detection problems. This report presents a set of 9 benchmark problems for comparing different types of radiation transport calculations, identifying appropriate tools for classes of problems, and testing and guiding the development of new methods. The benchmarks were drawn primarily from existing or previous calculations with a preference for scenarios which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22. From a technical perspective, the benchmarks were chosen to span a range of difficulty and to include gamma transport, neutron transport, or both and represent different important physical processes and a range of sensitivity to angular or energy fidelity. Following benchmark identification, existing information about geometry, measurements, and previous calculations were assembled. Monte Carlo results (MCNP decks) were reviewed or created and re-run in order to attain accurate computational times and to verify agreement with experimental data, when present. Benchmark information was then conveyed to ORNL in order to guide testing and development of hybrid calculations. The results of those ADVANTG calculations were then sent to PNNL for

  19. Hybrid undulator numerical optimization

    Energy Technology Data Exchange (ETDEWEB)

    Hairetdinov, A.H. [Kurchatov Institute, Moscow (Russian Federation); Zukov, A.A. [Solid State Physics Institute, Chernogolovka (Russian Federation)

    1995-12-31

    3D properties of the hybrid undulator scheme arc studied numerically using PANDIRA code. It is shown that there exist two well defined sets of undulator parameters which provide either maximum on-axis field amplitude or minimal higher harmonics amplitude of the basic undulator field. Thus the alternative between higher field amplitude or pure sinusoidal field exists. The behavior of the undulator field amplitude and harmonics structure for a large set of (undulator gap)/(undulator wavelength) values is demonstrated.

  20. STUDY OF THE CORRELATION BETWEEN POWER DEPOSITION OFTHE LOWER HYBRID WAVES AND THE HARDX-RAY RADIATION ON HT-7 TOKAMAK

    Institute of Scientific and Technical Information of China (English)

    石跃江; 万宝年; 凌必利; 丁伯江

    2001-01-01

    A seven-channel NaI(T1) detector array installed on an HT-7 superconducting tokamak has been used to detect the hard X-ray (Ehv>20 keV) emitted from the plasma. The physical mechanism of the lower hybrid waves propagating and absorbed in the plasma is investigated by the measurement of the hard X-ray radial profile at different discharge parameters.

  1. NOVEL BIPHASE CODE -INTEGRATED SIDELOBE SUPPRESSION CODE

    Institute of Scientific and Technical Information of China (English)

    Wang Feixue; Ou Gang; Zhuang Zhaowen

    2004-01-01

    A kind of novel binary phase code named sidelobe suppression code is proposed in this paper. It is defined to be the code whose corresponding optimal sidelobe suppression filter outputs the minimum sidelobes. It is shown that there do exist sidelobe suppression codes better than the conventional optimal codes-Barker codes. For example, the sidelobe suppression code of length 11 with filter of length 39 has better sidelobe level up to 17dB than that of Barker code with the same code length and filter length.

  2. From concatenated codes to graph codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom

    2004-01-01

    We consider codes based on simple bipartite expander graphs. These codes may be seen as the first step leading from product type concatenated codes to more complex graph codes. We emphasize constructions of specific codes of realistic lengths, and study the details of decoding by message passing...

  3. Simulating thermo-mechanical interaction between a xenon gas-filled chamber and tungsten first-wall armor for the LIFE reactor design using the BUCKY 1-D radiation hydrodynamics code

    Energy Technology Data Exchange (ETDEWEB)

    Heltemes, T A; Prochaska, A E; Moses, G A, E-mail: taheltemes@wisc.ed [Fusion Technology Institute, University of Wisconsin - Madison, 1500 Engineering Dr., Madison WI 53706 (United States)

    2010-08-01

    The BUCKY 1-D radiation hydrodynamics code has been used to simulate the dynamic thermo-mechanical interaction between a xenon gas-filled chamber and tungsten first-wall armor with an indirect-drive laser fusion target for the LIFE reactor design. Two classes of simulations were performed: (1) short-time (0-2 ms) simulations to fully capture the hydrodynamic effects of the introduction of the LIFE indirect-drive target x-ray and ion threat spectra and (2) long-time (2-70 ms) simulations starting with quiescent chamber conditions characteristic of those at 2 ms to estimate xenon plasma cooling between target implosions at 13 Hz. The short-time simulation results reported are: (1) the plasma hydrodynamics of the xenon in the chamber, (2) dynamic overpressure on the tungsten armor, and (3) time-dependent temperatures in the tungsten armor. The ramifications of local thermodynamic equilibrium (LTE) vs. non-LTE opacity models are also addressed.

  4. Tritons at energies of 10 MeV to 1 TeV: conversion coefficients for fluence-to-absorbed dose, equivalent dose, effective dose and gray equivalent, calculated using Monte Carlo radiation transport code MCNPX 2.7.C.

    Science.gov (United States)

    Copeland, Kyle; Parker, Donald E; Friedberg, Wallace

    2010-12-01

    Conversion coefficients were calculated for fluence-to-absorbed dose, fluence-to-equivalent dose, fluence-to-effective dose and fluence-to-gray equivalent for isotropic exposure of an adult female and an adult male to tritons ((3)H(+)) in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). Coefficients were calculated using Monte Carlo transport code MCNPX 2.7.C and BodyBuilder™ 1.3 anthropomorphic phantoms. Phantoms were modified to allow calculation of effective dose to a Reference Person using tissues and tissue weighting factors from 1990 and 2007 recommendations of the International Commission on Radiological Protection (ICRP) and calculation of gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. At 15 of the 19 energies for which coefficients for effective dose were calculated, coefficients based on ICRP 2007 and 1990 recommendations differed by less than 3%. The greatest difference, 43%, occurred at 30 MeV.

  5. Helions at energies of 10 MeV to 1 TeV: conversion coefficients for fluence-to-absorbed dose, equivalent dose, effective dose and gray equivalent, calculated using Monte Carlo radiation transport code MCNPX 2.7.C.

    Science.gov (United States)

    Copeland, Kyle; Parker, Donald E; Friedberg, Wallace

    2010-12-01

    Conversion coefficients were calculated for fluence-to-absorbed dose, fluence-to-equivalent dose, fluence-to-effective dose and fluence-to-gray equivalent, for isotropic exposure of an adult male and an adult female to helions ((3)He(2+)) in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). Calculations were performed using Monte Carlo transport code MCNPX 2.7.C and BodyBuilder™ 1.3 anthropomorphic phantoms modified to allow calculation of effective dose using tissues and tissue weighting factors from either the 1990 or 2007 recommendations of the International Commission on Radiological Protection (ICRP), and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. At 15 of the 19 energies for which coefficients for effective dose were calculated, coefficients based on ICRP 2007 and 1990 recommendations differed by less than 2%. The greatest difference, 62%, occurred at 100 MeV.

  6. Superdense Coding via Hot Trapped Ions

    Institute of Scientific and Technical Information of China (English)

    QIN Tao; FENG Mang; GAO Ke-Lin

    2004-01-01

    Superdense coding plays an important role in quantum information and can be performed with trapped ions. By confining the ions in a linear trap or a trap-cavity setup, we propose schemes to implement a reliable superdense coding by means of bichromatic radiation method. Experimental feasibility and reliability for achieving our schemes is discussed in detail.

  7. Improvements to SOIL: An Eulerian hydrodynamics code

    Energy Technology Data Exchange (ETDEWEB)

    Davis, C.G.

    1988-04-01

    Possible improvements to SOIL, an Eulerian hydrodynamics code that can do coupled radiation diffusion and strength of materials, are presented in this report. Our research is based on the inspection of other Eulerian codes and theoretical reports on hydrodynamics. Several conclusions from the present study suggest that some improvements are in order, such as second-order advection, adaptive meshes, and speedup of the code by vectorization and/or multitasking. 29 refs., 2 figs.

  8. Hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    West, J.G.W. [Electrical Machines (United Kingdom)

    1997-07-01

    The reasons for adopting hybrid vehicles result mainly from the lack of adequate range from electric vehicles at an acceptable cost. Hybrids can offer significant improvements in emissions and fuel economy. Series and parallel hybrids are compared. A combination of series and parallel operation would be the ideal. This can be obtained using a planetary gearbox as a power split device allowing a small generator to transfer power to the propulsion motor giving the effect of a CVT. It allows the engine to run at semi-constant speed giving better fuel economy and reduced emissions. Hybrid car developments are described that show the wide range of possible hybrid systems. (author)

  9. Good Codes From Generalised Algebraic Geometry Codes

    CERN Document Server

    Jibril, Mubarak; Ahmed, Mohammed Zaki; Tjhai, Cen

    2010-01-01

    Algebraic geometry codes or Goppa codes are defined with places of degree one. In constructing generalised algebraic geometry codes places of higher degree are used. In this paper we present 41 new codes over GF(16) which improve on the best known codes of the same length and rate. The construction method uses places of small degree with a technique originally published over 10 years ago for the construction of generalised algebraic geometry codes.

  10. Boltzmann Transport in Hybrid PIC HET Modeling

    Science.gov (United States)

    2015-07-01

    Paper 3. DATES COVERED (From - To) July 2015-July 2015 4. TITLE AND SUBTITLE Boltzmann transport in hybrid PIC HET modeling 5a. CONTRACT NUMBER In...produced a variety of self-consistent electron swarm codes, such as the Magboltz code, focused on directly solving the steady Boltzmann trans-port...Std. 239.18 Boltzmann transport in hybrid PIC HET modeling IEPC-2015- /ISTS-2015-b- Presented at Joint Conference of 30th International

  11. Hybrid particles and associated methods

    Science.gov (United States)

    Fox, Robert V; Rodriguez, Rene; Pak, Joshua J; Sun, Chivin

    2015-02-10

    Hybrid particles that comprise a coating surrounding a chalcopyrite material, the coating comprising a metal, a semiconductive material, or a polymer; a core comprising a chalcopyrite material and a shell comprising a functionalized chalcopyrite material, the shell enveloping the core; or a reaction product of a chalcopyrite material and at least one of a reagent, heat, and radiation. Methods of forming the hybrid particles are also disclosed.

  12. HERO: A 3D General Relativistic Radiative Postprocessor for Accretion Discs around Black Holes

    CERN Document Server

    Zhu, Yucong; Sadowski, Aleksander; Psaltis, Dimitrios

    2015-01-01

    HERO (Hybrid Evaluator for Radiative Objects) is a 3D general relativistic radiative transfer code which has been tailored to the problem of analyzing radiation from simulations of relativistic accretion discs around black holes. HERO is designed to be used as a postprocessor. Given some fixed fluid structure for the disc (i.e. density and velocity as a function of position from a hydrodynamics or magnetohydrodynamics simulation), the code obtains a self-consistent solution for the radiation field and for the gas temperatures using the condition of radiative equilibrium. The novel aspect of HERO is that it combines two techniques: 1) a short characteristics (SC) solver that quickly converges to a self consistent disc temperature and radiation field, with 2) a long characteristics (LC) solver that provides a more accurate solution for the radiation near the photosphere and in the optically thin regions. By combining these two techniques, we gain both the computational speed of SC and the high accuracy of LC. W...

  13. Benchmarking of Heavy Ion Transport Codes

    Energy Technology Data Exchange (ETDEWEB)

    Remec, Igor [ORNL; Ronningen, Reginald M. [Michigan State University, East Lansing; Heilbronn, Lawrence [University of Tennessee, Knoxville (UTK)

    2011-01-01

    Accurate prediction of radiation fields generated by heavy ion interactions is important in medical applications, space missions, and in designing and operation of rare isotope research facilities. In recent years, several well-established computer codes in widespread use for particle and radiation transport calculations have been equipped with the capability to simulate heavy ion transport and interactions. To assess and validate these capabilities, we performed simulations of a series of benchmark-quality heavy ion experiments with the computer codes FLUKA, MARS15, MCNPX, and PHITS. We focus on the comparisons of secondary neutron production. Results are encouraging; however, further improvements in models and codes and additional benchmarking are required.

  14. Development of a hybrid solar tracking device using a GPS and a photo-sensor capable of operating at low solar radiation intensity

    Science.gov (United States)

    Lee, Hyo Geun; Kim, Sang Suk; Kim, Sung Jo; Park, Su-Jin; Yun, Chang-wuk; Im, Gil-pyeong

    2015-09-01

    The PhotoVoltaic System, which is and environmentally-sound source of sustainable energy among most representaion of what alternative energy resources, is in the limelight [1]. Especially, the concentration photovoltaic system (CPV) is more effective than the general photovoltaic system. However, In existing CPV systems tracking the sun position when insolation is low or rapidly changing due to clouds and fog is pratically impossible. For this reason, obtain satisfactory power generation is difficult. In this reserely a hybrid method for tracking the sun's altitude/latitude angles by combining a GPS sensor with an existing tracking system was developed. This study tested the accuracy of tracking when the hybrid tracking system was applied to a 5 kW photovoltaic system, Currently, this study is performing tests to demonstrate the tracking accuracy by testing CPV modules instead of applying general PV modules for the system. In the future, the application of this system in a define MCPV(MCPV) module will improve the efficiency of power generation.