A Numerical Approach for Hybrid Simulation of Power System Dynamics Considering Extreme Icing Events
DEFF Research Database (Denmark)
Chen, Lizheng; Zhang, Hengxu; Wu, Qiuwei
2017-01-01
The global climate change leads to more extreme meteorological conditions such as icing weather, which have caused great losses to power systems. Comprehensive simulation tools are required to enhance the capability of power system risk assessment under extreme weather conditions. A hybrid...... numerical simulation scheme integrating icing weather events with power system dynamics is proposed to extend power system numerical simulation. A technique is developed to efficiently simulate the interaction of slow dynamics of weather events and fast dynamics of power systems. An extended package for PSS....../E enabling hybrid simulation of icing event and power system disturbance is developed, based on which a hybrid simulation platform is established. Numerical studies show that the functionality of power system simulation is greatly extended by taking into account the icing weather events....
Numerical Simulations of Flow and Fuel Regression Rate Coupling in Hybrid Rocket Motors
Directory of Open Access Journals (Sweden)
Marius STOIA-DJESKA
2017-03-01
Full Text Available The hybrid propulsion offers some remarkable advantages like high safety and high specific impulse and thus it is considered a promising technology for the next generation launchers and space systems. The purpose of this work is to validate a design tool for hybrid rocket motors (HRM through numerical simulations.
Test and numerical simulation of a new type of hybrid control technique
Institute of Scientific and Technical Information of China (English)
Meng Qingli; Zhang Minzheng; Cheng Dong
2005-01-01
In this paper, a new hybrid control technique, based on a combination of base-isolation and semi-active variable stiffness/damping in a superstructure, is presented. To illustrate the efficiency of the proposed control system, model tests on a mini-electromagnetic shaking table and a numerical simulation were performed. The test and numerical calculation results indicate that this new hybrid control mode with additional damping and smaller additional stiffness can achieve a better control efficiency.
Full Wave Simulation of Integrated Circuits Using Hybrid Numerical Methods
Tan, Jilin
Transmission lines play an important role in digital electronics, and in microwave and millimeter-wave circuits. Analysis, modeling, and design of transmission lines are critical to the development of the circuitry in the chip, subsystem, and system levels. In the past several decays, at the EM modeling level, the quasi-static approximation has been widely used due to its great simplicity. As the clock rates increase, the inter-connect effects such as signal delay, distortion, dispersion, reflection, and crosstalk, limit the performance of microwave systems. Meanwhile, the quasi-static approach loses its validity for some complex system structures. Since the successful system design of the PCB, MCM, and the chip packaging, rely very much on the computer aided EM level modeling and simulation, many new methods have been developed, such as the full wave approach, to guarantee the successful design. Many difficulties exist in the rigorous EM level analysis. Some of these include the difficulties in describing the behavior of the conductors with finite thickness and finite conductivity, the field singularity, and the arbitrary multilayered multi-transmission lines structures. This dissertation concentrates on the full wave study of the multi-conductor transmission lines with finite conductivity and finite thickness buried in an arbitrary lossy multilayered environment. Two general approaches have been developed. The first one is the integral equation method in which the dyadic Green's function for arbitrary layered media has been correctly formulated and has been tested both analytically and numerically. By applying this method, the double layered high dielectric permitivitty problem and the heavy dielectrical lossy problem in multilayered media in the CMOS circuit design have been solved. The second approach is the edge element method. In this study, the correct functional for the two dimensional propagation problem has been successfully constructed in a rigorous way
Numerical Simulation of Carbon Nanotubes/GaAs Hybrid PV Devices with AMPS-1D
Directory of Open Access Journals (Sweden)
Georgi Xosrovashvili
2014-01-01
Full Text Available The performance and characteristics of a hybrid heterojunction single-walled carbon nanotube and GaAs solar cell are modelled and numerically simulated using AMPS-1D device simulation tool. The device physics and performance with different junction parameters are analysed. The results suggest that the open-circuit voltage changes very slightly by changing the electron affinity, acceptor and donor density while the other electrical parameters reach an optimum value. Increasing the concentration of a discrete defect density in the absorber layer decreases the electrical parameters. The current-voltage characteristics, quantum efficiency, band gap, and thickness variation of the photovoltaic response will be quantitatively considered.
Interaction of Enceladus's Water Plume with Saturnian Magnetosphere via Hybrid Numerical Simulations
Somr, J.; Travnicek, P. M.; Stverak, S.; Khurana, K. K.; Hellinger, P.; Dougherty, M. K.
2008-12-01
Several close Cassini flybys of the Santurnian moon Enceladus provided direct in situ measurements of neutral water molecules escaping from the surface showing their interaction with the ambient plasma environment. Cassini measurements indicate Enceladus to act as an obstacle to the magnetized Saturnian plasma flow resulting in an effect of field line draping. Ionization of escaping neutrals by way of charge exchange with the ambient plasma produces fresh ions which are picked up by the Saturnian magnetosphere. The Saturnian co-rotating plasma flow therefore slows down and the ambient magnetic field is affected. We study these local plasma interaction of Enceladus and its neutral water plume with the Saturnian magnetosphere by using a full 3D hybrid code numerical simulation. The results of our model are subsequently compared with Cassini observations. Since a complete and accurate description of Enceladus surroundings is still missing, the initialialization of our simulations is based on currently published estimations. However, by use the hybrid code we are able to recover very similar magnetic field signatures as some of those realy observed by Cassini spacecraft.
Institute of Scientific and Technical Information of China (English)
Yu Daren; Wu Zhiwen; Wu Xiaoling
2005-01-01
Based on the analysis of the physical mechanism of the Stationary Plasma Thruster (SPT), an integral equation describing the ion density of the steady SPT and the ion velocity distribution function at an arbitrary axial position of the steady SPT channel are derived. The integral equation is equivalent to the Vlasov equation, but the former is simpler than the latter. A one dimensional steady quasineutral hybrid model is established. In this model, ions are described by the above integral equation, and neutrals and electrons are described by hydrodynamic equations. The transferred equivalency to the differential equation and the integral equation, together with other equations, are solved by an ordinary differential equation (ODE) solver in the Matlab.The numerical simulation results show that under various circumstances, the ion average velocity would be different and needs to be deduced separately.
Numerical simulation of active track tensioning system for autonomous hybrid vehicle
Mȩżyk, Arkadiusz; Czapla, Tomasz; Klein, Wojciech; Mura, Gabriel
2017-05-01
One of the most important components of a high speed tracked vehicle is an efficient suspension system. The vehicle should be able to operate both in rough terrain for performance of engineering tasks as well as on the road with high speed. This is especially important for an autonomous platform that operates either with or without human supervision, so that the vibration level can rise compared to a manned vehicle. In this case critical electronic and electric parts must be protected to ensure the reliability of the vehicle. The paper presents a dynamic parameters determination methodology of suspension system for an autonomous high speed tracked platform with total weight of about 5 tonnes and hybrid propulsion system. Common among tracked vehicles suspension solutions and cost-efficient, the torsion-bar system was chosen. One of the most important issues was determining optimal track tensioning - in this case an active hydraulic system was applied. The selection of system parameters was performed with using numerical model based on multi-body dynamic approach. The results of numerical analysis were used to define parameters of active tensioning control system setup. LMS Virtual.Lab Motion was used for multi-body dynamics numerical calculation and Matlab/SIMULINK for control system simulation.
A hybrid formulation for the numerical simulation of condensed phase explosives
Michael, L.; Nikiforakis, N.
2016-07-01
In this article we present a new formulation and an associated numerical algorithm, for the simulation of combustion and transition to detonation of condensed-phase commercial- and military-grade explosives, which are confined by (or in general interacting with one or more) compliant inert materials. Examples include confined rate-stick problems and interaction of shock waves with gas cavities or solid particles in explosives. This formulation is based on an augmented Euler approach to account for the mixture of the explosive and its products, and a multi-phase diffuse interface approach to solve for the immiscible interaction between the mixture and the inert materials, so it is in essence a hybrid (augmented Euler and multi-phase) model. As such, it has many of the desirable features of the two approaches and, critically for our applications of interest, it provides the accurate recovery of temperature fields across all components. Moreover, it conveys a lot more physical information than augmented Euler, without the complexity of full multi-phase Baer-Nunziato-type models or the lack of robustness of augmented Euler models in the presence of more than two components. The model can sustain large density differences across material interfaces without the presence of spurious oscillations in velocity and pressure, and it can accommodate realistic equations of state and arbitrary (pressure- or temperature-based) reaction-rate laws. Under certain conditions, we show that the formulation reduces to well-known augmented Euler or multi-phase models, which have been extensively validated and used in practice. The full hybrid model and its reduced forms are validated against problems with exact (or independently-verified numerical) solutions and evaluated for robustness for rate-stick and shock-induced cavity collapse case-studies.
Moszczyński, P.; Walczak, A.; Marciniak, P.
2016-12-01
In cyclic articles previously published we described and analysed self-organized light fibres inside a liquid crystalline (LC) cell contained photosensitive polymer (PP) layer. Such asymmetric LC cell we call a hybrid LC cell. Light fibre arises along a laser beam path directed in plane of an LC cell. It means that a laser beam is parallel to photosensitive layer. We observed the asymmetric LC cell response on an external driving field polarization. Observation has been done for an AC field first. It is the reason we decided to carry out a detailed research for a DC driving field to obtain an LC cell response step by step. The properly prepared LC cell has been built with an isolating layer and garbage ions deletion. We proved by means of a physical model, as well as a numerical simulation that LC asymmetric response strongly depends on junction barriers between PP and LC layers. New parametric model for a junction barrier on PP/LC boundary has been proposed. Such model is very useful because of lack of proper conductivity and charge carriers of band structure data on LC material.
A new hybrid-Lagrangian numerical scheme for gyrokinetic simulation of tokamak edge plasma
Energy Technology Data Exchange (ETDEWEB)
Ku, S. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Hager, R. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Chang, C. S. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Kwon, J. M. [National Fusion Research Institute, Republic of Korea; Parker, S. E. [University of Colorado Boulder, USA
2016-06-01
In order to enable kinetic simulation of non-thermal edge plasmas at a reduced computational cost, a new hybrid-Lagrangian δf scheme has been developed that utilizes the phase space grid in addition to the usual marker particles, taking advantage of the computational strengths from both sides. The new scheme splits the particle distribution function of a kinetic equation into two parts. Marker particles contain the fast space-time varying, δf, part of the distribution function and the coarse-grained phase-space grid contains the slow space-time varying part. The coarse-grained phase-space grid reduces the memory-requirement and the computing cost, while the marker particles provide scalable computing ability for the fine-grained physics. Weights of the marker particles are determined by a direct weight evolution equation instead of the differential form weight evolution equations that the conventional delta-f schemes use. The particle weight can be slowly transferred to the phase space grid, thereby reducing the growth of the particle weights. The non-Lagrangian part of the kinetic equation – e.g., collision operation, ionization, charge exchange, heat-source, radiative cooling, and others – can be operated directly on the phase space grid. Deviation of the particle distribution function on the velocity grid from a Maxwellian distribution function – driven by ionization, charge exchange and wall loss – is allowed to be arbitrarily large. The numerical scheme is implemented in the gyrokinetic particle code XGC1, which specializes in simulating the tokamak edge plasma that crosses the magnetic separatrix and is in contact with the material wall.
A new hybrid-Lagrangian numerical scheme for gyrokinetic simulation of tokamak edge plasma
Energy Technology Data Exchange (ETDEWEB)
Ku, S., E-mail: sku@pppl.gov [Princeton Plasma Physics Laboratory, Princeton University, Princeton, NJ 08543 (United States); Hager, R.; Chang, C.S. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, NJ 08543 (United States); Kwon, J.M. [National Fusion Research Institute (Korea, Republic of); Parker, S.E. [University of Colorado Boulder (United States)
2016-06-15
In order to enable kinetic simulation of non-thermal edge plasmas at a reduced computational cost, a new hybrid-Lagrangian δf scheme has been developed that utilizes the phase space grid in addition to the usual marker particles, taking advantage of the computational strengths from both sides. The new scheme splits the particle distribution function of a kinetic equation into two parts. Marker particles contain the fast space-time varying, δf, part of the distribution function and the coarse-grained phase-space grid contains the slow space-time varying part. The coarse-grained phase-space grid reduces the memory-requirement and the computing cost, while the marker particles provide scalable computing ability for the fine-grained physics. Weights of the marker particles are determined by a direct weight evolution equation instead of the differential form weight evolution equations that the conventional delta-f schemes use. The particle weight can be slowly transferred to the phase space grid, thereby reducing the growth of the particle weights. The non-Lagrangian part of the kinetic equation – e.g., collision operation, ionization, charge exchange, heat-source, radiative cooling, and others – can be operated directly on the phase space grid. Deviation of the particle distribution function on the velocity grid from a Maxwellian distribution function – driven by ionization, charge exchange and wall loss – is allowed to be arbitrarily large. The numerical scheme is implemented in the gyrokinetic particle code XGC1, which specializes in simulating the tokamak edge plasma that crosses the magnetic separatrix and is in contact with the material wall.
A new hybrid-Lagrangian numerical scheme for gyrokinetic simulation of tokamak edge plasma
Ku, S.; Hager, R.; Chang, C. S.; Kwon, J. M.; Parker, S. E.
2016-06-01
In order to enable kinetic simulation of non-thermal edge plasmas at a reduced computational cost, a new hybrid-Lagrangian δf scheme has been developed that utilizes the phase space grid in addition to the usual marker particles, taking advantage of the computational strengths from both sides. The new scheme splits the particle distribution function of a kinetic equation into two parts. Marker particles contain the fast space-time varying, δf, part of the distribution function and the coarse-grained phase-space grid contains the slow space-time varying part. The coarse-grained phase-space grid reduces the memory-requirement and the computing cost, while the marker particles provide scalable computing ability for the fine-grained physics. Weights of the marker particles are determined by a direct weight evolution equation instead of the differential form weight evolution equations that the conventional delta-f schemes use. The particle weight can be slowly transferred to the phase space grid, thereby reducing the growth of the particle weights. The non-Lagrangian part of the kinetic equation - e.g., collision operation, ionization, charge exchange, heat-source, radiative cooling, and others - can be operated directly on the phase space grid. Deviation of the particle distribution function on the velocity grid from a Maxwellian distribution function - driven by ionization, charge exchange and wall loss - is allowed to be arbitrarily large. The numerical scheme is implemented in the gyrokinetic particle code XGC1, which specializes in simulating the tokamak edge plasma that crosses the magnetic separatrix and is in contact with the material wall.
Numerical simulation of a hybrid CSP/Biomass 5 MWel power plant
Soares, João; Oliveira, Armando
2017-06-01
The fundamental benefit of using renewable energy systems is undeniable since they rely on a source that will not run out. Nevertheless, they strongly depend on meteorological conditions (solar, wind, etc.), leading to uncertainty of instantaneous energy supply and consequently to grid connection issues. An interesting concept is renewable hybridisation. This consists in the strategic combination of different renewable sources in the power generation portfolio by taking advantage of each technology. Hybridisation of concentrating solar power with biomass denotes a powerful way of assuring system stability and reliability. The main advantage is dispatchability through the whole extent of the operating range. Regarding concentrating solar power heat transfer fluid, direct steam generation is one of the most interesting concepts. Nevertheless, it presents itself technical challenges that are mostly related to the two-phase fluid flow in horizontal pipes, as well as the design of an energy storage system. Also, the use of reheat within the turbine is usually indirectly addressed, hindering system efficiency. These challenges can be addressed through hybridisation with biomass. In this paper, a hybrid renewable electricity generation system is presented. The system relies on a combination of solar and biomass sources to drive a 5 MWel steam turbine. System performance is analysed through numerical simulation using Ebsilon professional software. The use of direct reheat in the turbine is addressed. Results show that hybridisation results in an enhancement of system dispatchability and generation stability. Furthermore, hybridisation enhanced the annual solar field and power block efficiencies, and thus the system annual efficiency (from 7.6% to 20%). The use of direct reheat eliminates steam wetness in the last turbine stage and also improves system efficiency.
Shershnev, Anton A.; Kudryavtsev, Alexey N.; Kashkovsky, Alexander V.; Khotyanovsky, Dmitry V.
2016-10-01
The present paper describes HyCFS code, developed for numerical simulation of compressible high-speed flows on hybrid CPU/GPU (Central Processing Unit / Graphical Processing Unit) computational clusters on the basis of full unsteady Navier-Stokes equations, using modern shock capturing high-order TVD (Total Variation Diminishing) and WENO (Weighted Essentially Non-Oscillatory) schemes on general curvilinear structured grids. We discuss the specific features of hybrid architecture and details of program implementation and present the results of code verification.
Energy Technology Data Exchange (ETDEWEB)
Burdorf, Sven; Bauer, Gottfried Heinrich; Brueggemann, Rudolf [Institut fuer Physik, Carl von Ossietzky Universitaet, Oldenburg (Germany)
2011-07-01
Hybrid solar cells consisting of dye sensitizers incorporated in the i-layer of microcrystalline silicon pin solar cell have been proposed and even recently processed. The dye sensitizer molecules are embedded in the matrix and enhance the overall absorption of the dye-matrix system due to their high absorption coefficient in the spectral range interesting for photovoltaic applications. However, the charge transport properties of dyes are quite poor. Microcrystalline silicon on the other hand has acceptable charge transport properties, while the absorption, given a layer thickness in the micron range, is relatively poor. This contribution investigates the effiency improvement of hybrid dye-microcrystalline solar cells compared to pure microcrystalline solar cells by simulation. The results indicate that, under optimal conditions, the effiency can be improved by more than 20 % compared to a pure microcrystalline silicon cell. The thickness reduction for the hybrid system can be as large as 50 % for the same effiency.
Hybrid undulator numerical optimization
Energy Technology Data Exchange (ETDEWEB)
Hairetdinov, A.H. [Kurchatov Institute, Moscow (Russian Federation); Zukov, A.A. [Solid State Physics Institute, Chernogolovka (Russian Federation)
1995-12-31
3D properties of the hybrid undulator scheme arc studied numerically using PANDIRA code. It is shown that there exist two well defined sets of undulator parameters which provide either maximum on-axis field amplitude or minimal higher harmonics amplitude of the basic undulator field. Thus the alternative between higher field amplitude or pure sinusoidal field exists. The behavior of the undulator field amplitude and harmonics structure for a large set of (undulator gap)/(undulator wavelength) values is demonstrated.
Energy Technology Data Exchange (ETDEWEB)
Ko, Soon Heum [Linkoeping University, Linkoeping (Sweden); Kim, Na Yong; Nikitopoulos, Dimitris E.; Moldovan, Dorel [Louisiana State University, Baton Rouge (United States); Jha, Shantenu [Rutgers University, Piscataway (United States)
2014-01-15
Numerical approaches are presented to minimize the statistical errors inherently present due to finite sampling and the presence of thermal fluctuations in the molecular region of a hybrid computational fluid dynamics (CFD) - molecular dynamics (MD) flow solution. Near the fluid-solid interface the hybrid CFD-MD simulation approach provides a more accurate solution, especially in the presence of significant molecular-level phenomena, than the traditional continuum-based simulation techniques. It also involves less computational cost than the pure particle-based MD. Despite these advantages the hybrid CFD-MD methodology has been applied mostly in flow studies at high velocities, mainly because of the higher statistical errors associated with low velocities. As an alternative to the costly increase of the size of the MD region to decrease statistical errors, we investigate a few numerical approaches that reduce sampling noise of the solution at moderate-velocities. These methods are based on sampling of multiple simulation replicas and linear regression of multiple spatial/temporal samples. We discuss the advantages and disadvantages of each technique in the perspective of solution accuracy and computational cost.
Jahantigh, Nabi; Keshavarz, Ali; Mirzaei, Masoud
2015-01-01
The aim of this study is to determine optimum hybrid heating systems parameters, such as temperature, surface area of a radiant heater and vent area to have thermal comfort conditions. DOE, Factorial design method is used to determine the optimum values for input parameters. A 3D model of a virtual standing thermal manikin with real dimensions is considered in this study. Continuity, momentum, energy, species equations for turbulent flow and physiological equation for thermal comfort are numerically solved to study heat, moisture and flow field. K - ɛRNG Model is used for turbulence modeling and DO method is used for radiation effects. Numerical results have a good agreement with the experimental data reported in the literature. The effect of various combinations of inlet parameters on thermal comfort is considered. According to Pareto graph, some of these combinations that have significant effect on the thermal comfort require no more energy can be used as useful tools. A better symmetrical velocity distribution around the manikin is also presented in the hybrid system.
Directory of Open Access Journals (Sweden)
Jorge F. Oliveira
2013-01-01
Full Text Available This paper reviews some of the promising doors that functional analysis techniques have recently opened in the field of electronic circuit simulation. Because of the modulated nature of radio frequency (RF signals, the corresponding electronic circuits seem to operate in a slow time scale for the aperiodic information and another, much faster, time scale for the periodic carrier. This apparent multirate behavior can be appropriately described using partial differential equations (PDEs within a bivariate framework, which can be solved in an efficient way using hybrid time-frequency techniques. With these techniques, the aperiodic information dimension is treated in the discrete time domain, while the periodic carrier dimension is processed in the frequency domain, in which the solution is evaluated within a space of harmonically related sinusoidal functions. The objective of this paper is thus to provide a general overview on the most important hybrid time-frequency techniques, as the ones found in commercial tools or the ones recently published in the literature.
Numerical simulation of droplet shapes in laser-MIG hybrid welding
Lei, Zhenglong; Ni, Longchang; Li, Bingwei; Zhang, Kezhao
2017-02-01
A three-dimensional finite element model based on minimum energy principle is developed to simulate the droplet transfer process in laser-MIG hybrid welding. The energy manifestations of all forces that determine droplet shapes are considered in this model, and the model has been used to predict droplet shapes. Offset of droplet centroid and critical additional axial acceleration are adopted to characterize the stability of droplet transfer. The calculated droplet shapes and offset of droplet centroid agree well with experimental results. It is found that increasing laser power or decreasing welding current would destabilize droplet transfer. Additional mechanical forces contribute to stable droplet transfer, and the positive effects of increased shielding gas flow rate on the stability of welding processes are subsequently verified.
Bhattacharya, Amitabh; Kesarkar, Tejas
2016-10-01
A combination of finite difference (FD) and boundary integral (BI) methods is used to formulate an efficient solver for simulating unsteady Stokes flow around particles. The two-dimensional (2D) unsteady Stokes equation is being solved on a Cartesian grid using a second order FD method, while the 2D steady Stokes equation is being solved near the particle using BI method. The two methods are coupled within the viscous boundary layer, a few FD grid cells away from the particle, where solutions from both FD and BI methods are valid. We demonstrate that this hybrid method can be used to accurately solve for the flow around particles with irregular shapes, even though radius of curvature of the particle surface is not resolved by the FD grid. For dilute particle concentrations, we construct a virtual envelope around each particle and solve the BI problem for the flow field located between the envelope and the particle. The BI solver provides velocity boundary condition to the FD solver at "boundary" nodes located on the FD grid, adjacent to the particles, while the FD solver provides the velocity boundary condition to the BI solver at points located on the envelope. The coupling between FD method and BI method is implicit at every time step. This method allows us to formulate an O(N) scheme for dilute suspensions, where N is the number of particles. For semidilute suspensions, where particles may cluster, an envelope formation method has been formulated and implemented, which enables solving the BI problem for each individual particle cluster, allowing efficient simulation of hydrodynamic interaction between particles even when they are in close proximity. The method has been validated against analytical results for flow around a periodic array of cylinders and for Jeffrey orbit of a moving ellipse in shear flow. Simulation of multiple force-free irregular shaped particles in the presence of shear in a 2D slit flow has been conducted to demonstrate the robustness of
Uccellini, L. W.; Johnson, D. R.; Schlesinger, R. E.
1979-01-01
A solution is presented for matching boundary conditions across the interface of an isentropic and sigma coordinate hybrid model. A hybrid model based on the flux form of the primitive equations is developed which allows direct vertical exchange between the model domains, satisfies conservation principles with respect to transport processes, and maintains a smooth transition across the interface without need for artificial adjustment or parameterization schemes. The initial hybrid model simulations of a jet streak propagating in a zonal channel are used to test the feasibility of the hybrid model approach. High efficiency of the hybrid model is demonstrated.
Hybrid Simulation of Composite Structures
DEFF Research Database (Denmark)
Høgh, Jacob Herold
Hybrid simulation is a substructural method combining a numerical simulation with a physical experiment. A structure is thereby simulated under the assumption that a substructure’s response is well known and easily modelled while a given substructure is studied more accurately in a physical...... of freedom. In this dissertation the main focus is to develop hybrid simulation for composite structures e.g. wind turbine blades where the boundary between the numerical model and the physical experiment is continues i.e. in principal infinite amount of degrees of freedom. This highly complicates...
A State Event Detection Algorithm for Numerically Simulating Hybrid Systems with Model Singularities
2007-01-01
introduced there as well. However, in these early works as well as in Hay and Griffin [1979], Joglekar and Reklaitis [1984], and Prestin and Berzine...1995. Nonlinear Control Systems. Springer, London. Joglekar, G. and Reklaitis , G. 1984. A simulator for batch and semi-continuous processes
Numerical simulation and validation of SI-CAI hybrid combustion in a CAI/HCCI gasoline engine
Wang, Xinyan; Xie, Hui; Xie, Liyan; Zhang, Lianfang; Li, Le; Chen, Tao; Zhao, Hua
2013-02-01
SI-CAI hybrid combustion, also known as spark-assisted compression ignition (SACI), is a promising concept to extend the operating range of CAI (Controlled Auto-Ignition) and achieve the smooth transition between spark ignition (SI) and CAI in the gasoline engine. In this study, a SI-CAI hybrid combustion model (HCM) has been constructed on the basis of the 3-Zones Extended Coherent Flame Model (ECFM3Z). An ignition model is included to initiate the ECFM3Z calculation and induce the flame propagation. In order to precisely depict the subsequent auto-ignition process of the unburned fuel and air mixture independently after the initiation of flame propagation, the tabulated chemistry concept is adopted to describe the auto-ignition chemistry. The methodology for extracting tabulated parameters from the chemical kinetics calculations is developed so that both cool flame reactions and main auto-ignition combustion can be well captured under a wider range of thermodynamic conditions. The SI-CAI hybrid combustion model (HCM) is then applied in the three-dimensional computational fluid dynamics (3-D CFD) engine simulation. The simulation results are compared with the experimental data obtained from a single cylinder VVA engine. The detailed analysis of the simulations demonstrates that the SI-CAI hybrid combustion process is characterised with the early flame propagation and subsequent multi-site auto-ignition around the main flame front, which is consistent with the optical results reported by other researchers. Besides, the systematic study of the in-cylinder condition reveals the influence mechanism of the early flame propagation on the subsequent auto-ignition.
Directory of Open Access Journals (Sweden)
Adel Abdelnaby
2013-06-01
Full Text Available Reinforced concrete bridge piers are subjected to complex loading conditions under earthquake ground motions. Bridge geometric irregularities and asymmetries result in combined actions imposed on the piers as a combination of displacements and rotations in all six degrees of freedom at the pier-deck juncture. Existing analytical tools have proven their inadequacy in representing the actual behavior of piers under these combined actions, particularly in their inelastic range. The objective of this investigation is to develop a fundamental understanding of the effects of these combined actions on the performance of RC piers and the resulting system response. This paper describes a part of the CABER project that verifies the numerical hybrid simulation of the curved bridge. In this part two models were introduced, a whole model and a sub-structured hybrid model. The whole model was established using the Zeus-NL analysis platform, which is capable of performing inelastic nonlinear response history analysis of the whole curved bridge. The hybrid model was divided into three modules which comprised the deck, left and right piers, and the middle pier of the bridge. The three modules were modeled by Zeus-NL as a static analysis module interface. The simulation coordinator (SimCor software was utilized to communicate between these modules using a Pseudo-Dynamic time integration scheme. Results obtained from both models were compared and conclusions were drawn.
Numerical Propulsion System Simulation
Naiman, Cynthia
2006-01-01
The NASA Glenn Research Center, in partnership with the aerospace industry, other government agencies, and academia, is leading the effort to develop an advanced multidisciplinary analysis environment for aerospace propulsion systems called the Numerical Propulsion System Simulation (NPSS). NPSS is a framework for performing analysis of complex systems. The initial development of NPSS focused on the analysis and design of airbreathing aircraft engines, but the resulting NPSS framework may be applied to any system, for example: aerospace, rockets, hypersonics, power and propulsion, fuel cells, ground based power, and even human system modeling. NPSS provides increased flexibility for the user, which reduces the total development time and cost. It is currently being extended to support the NASA Aeronautics Research Mission Directorate Fundamental Aeronautics Program and the Advanced Virtual Engine Test Cell (AVETeC). NPSS focuses on the integration of multiple disciplines such as aerodynamics, structure, and heat transfer with numerical zooming on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS development includes capabilities to facilitate collaborative engineering. The NPSS will provide improved tools to develop custom components and to use capability for zooming to higher fidelity codes, coupling to multidiscipline codes, transmitting secure data, and distributing simulations across different platforms. These powerful capabilities extend NPSS from a zero-dimensional simulation tool to a multi-fidelity, multidiscipline system-level simulation tool for the full development life cycle.
Analysis of hybrid viscous damper by real time hybrid simulations
DEFF Research Database (Denmark)
Brodersen, Mark Laier; Ou, Ge; Høgsberg, Jan Becker
2016-01-01
Results from real time hybrid simulations are compared to full numerical simulations for a hybrid viscous damper, composed of a viscous dashpot in series with an active actuator and a load cell. By controlling the actuator displacement via filtered integral force feedback the damping performance...... of the hybrid viscous damper is improved, while for pure integral force feedback the damper stroke is instead increased. In the real time hybrid simulations viscous damping is emulated by a bang-bang controlled Magneto-Rheological (MR) damper. The controller activates high-frequency modes and generates drift...... in the actuator displacement, and only a fraction of the measured damper force can therefore be used as input to the investigated integral force feedback in the real time hybrid simulations....
Sun, Li; Hernandez-Guzman, Jessica; Warncke, Kurt
2009-09-01
Electron spin echo envelope modulation (ESEEM) is a technique of pulsed-electron paramagnetic resonance (EPR) spectroscopy. The analyis of ESEEM data to extract information about the nuclear and electronic structure of a disordered (powder) paramagnetic system requires accurate and efficient numerical simulations. A single coupled nucleus of known nuclear g value (g(N)) and spin I=1 can have up to eight adjustable parameters in the nuclear part of the spin Hamiltonian. We have developed OPTESIM, an ESEEM simulation toolbox, for automated numerical simulation of powder two- and three-pulse one-dimensional ESEEM for arbitrary number (N) and type (I, g(N)) of coupled nuclei, and arbitrary mutual orientations of the hyperfine tensor principal axis systems for N>1. OPTESIM is based in the Matlab environment, and includes the following features: (1) a fast algorithm for translation of the spin Hamiltonian into simulated ESEEM, (2) different optimization methods that can be hybridized to achieve an efficient coarse-to-fine grained search of the parameter space and convergence to a global minimum, (3) statistical analysis of the simulation parameters, which allows the identification of simultaneous confidence regions at specific confidence levels. OPTESIM also includes a geometry-preserving spherical averaging algorithm as default for N>1, and global optimization over multiple experimental conditions, such as the dephasing time (tau) for three-pulse ESEEM, and external magnetic field values. Application examples for simulation of (14)N coupling (N=1, N=2) in biological and chemical model paramagnets are included. Automated, optimized simulations by using OPTESIM lead to a convergence on dramatically shorter time scales, relative to manual simulations.
Confidence in Numerical Simulations
Energy Technology Data Exchange (ETDEWEB)
Hemez, Francois M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2015-02-23
This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to “forecast,” that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists “think.” This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. “Confidence” derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.
Gui, Y. L.; Zhao, Z. Y.; Zhou, H. Y.; Wu, W.
2016-10-01
In this paper, a cohesive fracture model is applied to model P-wave propagation through fractured rock mass using hybrid continuum-discrete element method, i.e. Universal Distinct Element Code (UDEC). First, a cohesive fracture model together with the background of UDEC is presented. The cohesive fracture model considers progressive failure of rock fracture rather than an abrupt damage through simultaneously taking into account the elastic, plastic and damage mechanisms as well as a modified failure function. Then, a series of laboratory tests from the literature on P-wave propagation through rock mass containing single fracture and two parallel fractures are introduced and the numerical models used to simulate these laboratory tests are described. After that, all the laboratory tests are simulated and presented. The results show that the proposed model, particularly the cohesive fracture model, can capture very well the wave propagation characteristics in rock mass with non-welded and welded fractures with and without filling materials. In the meantime, in order to identify the significance of fracture on wave propagation, filling materials with different particle sizes and the fracture thickness are discussed. Both factors are found to be crucial for wave attenuation. The simulations also show that the frequency of transmission wave is lowered after propagating through fractures. In addition, the developed numerical scheme is applied to two-dimensional wave propagation in the rock mass.
Bernales, Jorge; Rogozhina, Irina; Greve, Ralf; Thomas, Maik
2017-01-01
The shallow ice approximation (SIA) is commonly used in ice-sheet models to simplify the force balance equations within the ice. However, the SIA cannot adequately reproduce the dynamics of the fast flowing ice streams usually found at the margins of ice sheets. To overcome this limitation, recent studies have introduced heuristic hybrid combinations of the SIA and the shelfy stream approximation. Here, we implement four different hybrid schemes into a model of the Antarctic Ice Sheet in order to compare their performance under present-day conditions. For each scheme, the model is calibrated using an iterative technique to infer the spatial variability in basal sliding parameters. Model results are validated against topographic and velocity data. Our analysis shows that the iterative technique compensates for the differences between the schemes, producing similar ice-sheet configurations through quantitatively different results of the sliding coefficient calibration. Despite this we observe a robust agreement in the reconstructed patterns of basal sliding parameters. We exchange the calibrated sliding parameter distributions between the schemes to demonstrate that the results of the model calibration cannot be straightforwardly transferred to models based on different approximations of ice dynamics. However, easily adaptable calibration techniques for the potential distribution of basal sliding coefficients can be implemented into ice models to overcome such incompatibility, as shown in this study.
Numerical simulation of dusty plasmas
Energy Technology Data Exchange (ETDEWEB)
Winske, D.
1995-09-01
The numerical simulation of physical processes in dusty plasmas is reviewed, with emphasis on recent results and unresolved issues. Three areas of research are discussed: grain charging, weak dust-plasma interactions, and strong dust-plasma interactions. For each area, we review the basic concepts that are tested by simulations, present some appropriate examples, and examine numerical issues associated with extending present work.
Electric/Hybrid Vehicle Simulation
Slusser, R. A.; Chapman, C. P.; Brennand, J. P.
1985-01-01
ELVEC computer program provides vehicle designer with simulation tool for detailed studies of electric and hybrid vehicle performance and cost. ELVEC simulates performance of user-specified electric or hybrid vehicle under user specified driving schedule profile or operating schedule. ELVEC performs vehicle design and life cycle cost analysis.
Hassanzadeh, Amir; Pourmahmoud, Nader; Dadvand, Abdolrahman
2017-05-01
In the present article, hybrid lattice Boltzmann-immersed boundary method is utilized to simulate two-dimensional incompressible viscous flow involving flexible immersed red blood cell (RBC) in a microchannel. The main focus of the present research is to study motion and deformation of both healthy and sick RBCs in a vessel with different sizes of stenosis. The presented computational results consent reasonably well with the available data in the literature. Two different channels i.e. a simple and a constricted channel are investigated in the present manuscript. The results show that the RBC transfer and deform without any lift force and rotation induced when it is located on the symmetry axis of the microchannel. However, when the RBC is located off the symmetry axis, the pressure difference produced in the flow around the RBC would apply lift forces on them and expel them towards the center of the channel. The healthy RBC always shows more deformation related to the sick one along the channel. Another important result of the present research is that for the ratio of [Formula: see text] a sick RBC cannot pass the stenosis, and it reasons serious difficulties for body. The present results have been compared with the available experimental and numerical results which show good agreements.
Numerical simulation of droplet impact on interfaces
Kahouadji, Lyes; Che, Zhizhao; Matar, Omar; Shin, Seungwon; Chergui, Jalel; Juric, Damir
2015-11-01
Simulations of three-dimensional droplet impact on interfaces are carried out using BLUE, a massively-parallel code based on a hybrid Front-Tracking/Level-Set algorithm for Lagrangian tracking of arbitrarily deformable phase interfaces. High resolution numerical results show fine details and features of droplet ejection, crown formation and rim instability observed under similar experimental conditions. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.
Numerical simulation of welding
DEFF Research Database (Denmark)
Hansen, Jan Langkjær; Thorborg, Jesper
Aim of project:To analyse and model the transient thermal field from arc welding (SMAW, V-shaped buttweld in 15mm plate) and to some extend the mechanical response due to the thermal field. - To implement this model in a general purpose finite element program such as ABAQUS.The simulation...... is limited to 2D and as regards the thermal model we assume plain cross section when comparing with experiments and analytical solutions.Stresses and deformations based on the thermal model is mainly described qualitatively in relation to the mechanical model in ABAQUS. As regards the mechanical model, plain...... stress is also taken into account.Work carried out:With few means it is possible to define a thermal model which describes the thermal field from the welding process in reasonable agreement with reality. Identical results are found with ABAQUS and Rosenthal’s analytical solution of the governing heat...
Numerical simulation of welding
DEFF Research Database (Denmark)
Hansen, Jan Langkjær; Thorborg, Jesper
Aim of project:To analyse and model the transient thermal field from arc welding (SMAW, V-shaped buttweld in 15mm plate) and to some extend the mechanical response due to the thermal field. - To implement this model in a general purpose finite element program such as ABAQUS.The simulation...... stress is also taken into account.Work carried out:With few means it is possible to define a thermal model which describes the thermal field from the welding process in reasonable agreement with reality. Identical results are found with ABAQUS and Rosenthal’s analytical solution of the governing heat...... transfer equation under same conditions. It is relative easy tointroduce boundary conditions such as convection and radiation where not surprisingly the radiation has the greatest influence especially from the high temperature regions in the weld pool and the heat affected zone.Due to the large temperature...
A Dynamical Simulation Facility for Hybrid Systems
Back, A; Myers, M; Back, Allen; Guckenheimer, John; Myers, Mark
1993-01-01
Abstract: This paper establishes a general framework for describing hybrid dynamical systems which is particularly suitable for numerical simulation. In this context, the data structures used to describe the sets and functions which comprise the dynamical system are crucial since they provide the link between a natural mathematical formulation of a problem and the correct application of standard numerical algorithms. We describe a partial implementation of the design methodology and use this simulation tool for a specific control problem in robotics as an illustration of the utility of the approach for practical applications.
Chimera: A hybrid approach to numerical loop quantum cosmology
Diener, Peter; Singh, Parampreet
2013-01-01
The existence of a quantum bounce in isotropic spacetimes is a key result in loop quantum cosmology (LQC), which has been demonstrated to arise in all the models studied so far. In most of the models, the bounce has been studied using numerical simulations involving states which are sharply peaked and which bounce at volumes much larger than the Planck volume. An important issue is to confirm the existence of the bounce for states which have a wide spread, or which bounce closer to the Planck volume. Numerical simulations with such states demand large computational domains, making them very expensive and practically infeasible with the techniques which have been implemented so far. To overcome these difficulties, we present an efficient hybrid numerical scheme using the property that at the small spacetime curvature, the quantum Hamiltonian constraint in LQC, which is a difference equation with uniform discretization in volume, can be approximated by a Wheeler-DeWitt differential equation. By carefully choosi...
Numerical simulation of gas explosions
Energy Technology Data Exchange (ETDEWEB)
Van den Berg, A.C.; Van Wingerden, J.M.; Verhagen, T.L.
1989-08-01
Recent developments in numerical fluid dynamics and computer technology enable detailed simulation of gas explosions. Prins Maurits Laboratory TNO of the Netherlands Organization for Applied Scientific Research developed the necessary software. This software is a useful tool to develop and evaluate explosion safe installations. One of the possible applications is the design of save offshore rigs. (f.i. to prevent Piper Alpha disasters). The two-dimensional blast model is described and an example is given. 4 figs., 6 refs.
Numerical Simulation of Protoplanetary Vortices
2003-12-01
UNCLASSIFIED Center for Turbulence Research 81 Annual Research Briefs 2003 Numerical simulation of protoplanetary vortices By H. Lin, J.A. Barranco t AND P.S...planetesimals and planets. In earlier works ( Barranco & Marcus 2000; Barranco et al. 2000; Lin et al. 2000) we have briefly described the possible physical...transport. In particular, Barranco et al. (2000) provided a general mathe- matical framework that is suitable for the asymptotic regime of the disk
Zhu, Yanxia; Song, Kedong; Jiang, Siyu; Chen, Jinglian; Tang, Lingzhi; Li, Siyuan; Fan, Jiangli; Wang, Yiwei; Zhao, Jiaquan; Liu, Tianqing
2017-01-01
Cartilage tissue engineering is believed to provide effective cartilage repair post-injuries or diseases. Biomedical materials play a key role in achieving successful culture and fabrication of cartilage. The physical properties of a chitosan/gelatin hybrid hydrogel scaffold make it an ideal cartilage biomimetic material. In this study, a chitosan/gelatin hybrid hydrogel was chosen to fabricate a tissue-engineered cartilage in vitro by inoculating human adipose-derived stem cells (ADSCs) at both dynamic and traditional static culture conditions. A bioreactor that provides a dynamic culture condition has received greater applications in tissue engineering due to its optimal mass transfer efficiency and its ability to simulate an equivalent physical environment compared to human body. In this study, prior to cell-scaffold fabrication experiment, mathematical simulations were confirmed with a mass transfer of glucose and TGF-β2 both in rotating wall vessel bioreactor (RWVB) and static culture conditions in early stage of culture via computational fluid dynamic (CFD) method. To further investigate the feasibility of the mass transfer efficiency of the bioreactor, this RWVB was adopted to fabricate three-dimensional cell-hydrogel cartilage constructs in a dynamic environment. The results showed that the mass transfer efficiency of RWVB was faster in achieving a final equilibrium compared to culture in static culture conditions. ADSCs culturing in RWVB expanded three times more compared to that in static condition over 10 days. Induced cell cultivation in a dynamic RWVB showed extensive expression of extracellular matrix, while the cell distribution was found much more uniformly distributing with full infiltration of extracellular matrix inside the porous scaffold. The increased mass transfer efficiency of glucose and TGF-β2 from RWVB promoted cellular proliferation and chondrogenic differentiation of ADSCs inside chitosan/gelatin hybrid hydrogel scaffolds. The
Numerical simulation of nuclear pebble bed configurations
Energy Technology Data Exchange (ETDEWEB)
Shams, A., E-mail: shams@nrg.eu [Nuclear Research and Consultancy Group (NRG), Petten (Netherlands); Roelofs, F., E-mail: roelofs@nrg.eu [Nuclear Research and Consultancy Group (NRG), Petten (Netherlands); Komen, E.M.J., E-mail: komen@nrg.eu [Nuclear Research and Consultancy Group (NRG), Petten (Netherlands); Baglietto, E., E-mail: emiliob@MIT.EDU [Massachusetts Institute of Technology (MIT) (United States)
2015-08-15
Highlights: • Numerical simulations of a single face cubic centred pebble bed are performed. • Wide range of turbulence modelling techniques are used to perform these calculations. • The methods include 1-DNS, 1-LES, 3-Hybrid (RANS/LES) and 3-RANS models, respectively. • The obtained results are extensively compared to provide guidelines for such flow regimes. • These guidelines are used to perform reference LES for a limited sized random pebble bed. - Abstract: High Temperature Reactors (HTRs) are being considered all over the world. An HTR uses helium gas as a coolant, while the moderator function is taken up by graphite. The fuel is embedded in the graphite moderator. A particular inherent safety advantage of HTR designs is that the graphite can withstand very high temperatures, that the fuel inside will stay inside the graphite pebble and cannot escape to the surroundings even in the event of loss of cooling. Generally, the core can be designed using a graphite pebble bed. Some experimental and demonstration reactors have been operated using a pebble bed design. The test reactors have shown safe and efficient operation, however questions have been raised about possible occurrence of local hot spots in the pebble bed which may affect the pebble integrity. Analysis of the fuel integrity requires detailed evaluation of local heat transport phenomena in a pebble bed, and since such phenomena cannot easily be modelled experimentally, numerical simulations are a useful tool. As a part of a European project, named Thermal Hydraulics of Innovative Nuclear Systems (THINS), a benchmarking quasi-direct numerical simulation (q-DNS) of a well-defined pebble bed configuration has been performed. This q-DNS will serve as a reference database in order to evaluate the prediction capabilities of different turbulence modelling approaches. A wide range of numerical simulations based on different available turbulence modelling approaches are performed and compared with
Numerical Propulsion System Simulation Architecture
Naiman, Cynthia G.
2004-01-01
The Numerical Propulsion System Simulation (NPSS) is a framework for performing analysis of complex systems. Because the NPSS was developed using the object-oriented paradigm, the resulting architecture is an extensible and flexible framework that is currently being used by a diverse set of participants in government, academia, and the aerospace industry. NPSS is being used by over 15 different institutions to support rockets, hypersonics, power and propulsion, fuel cells, ground based power, and aerospace. Full system-level simulations as well as subsystems may be modeled using NPSS. The NPSS architecture enables the coupling of analyses at various levels of detail, which is called numerical zooming. The middleware used to enable zooming and distributed simulations is the Common Object Request Broker Architecture (CORBA). The NPSS Developer's Kit offers tools for the developer to generate CORBA-based components and wrap codes. The Developer's Kit enables distributed multi-fidelity and multi-discipline simulations, preserves proprietary and legacy codes, and facilitates addition of customized codes. The platforms supported are PC, Linux, HP, Sun, and SGI.
固液火箭发动机工作过程三维数值仿真%Three-dimensional numerical simulation of hybrid rocket motor operation process
Institute of Scientific and Technical Information of China (English)
李新田; 田辉; 曾鹏; 蔡国飙
2012-01-01
根据固体燃料壁面与气相间的流固耦合得出了固体燃料燃速模型,对采用星形装药的H2O2/HTPB（hydroxyl-terminated polybutadiene）固液火箭发动机进行了燃烧流动三维数值仿真,得到了流场参数的分布及不同位置的固体燃料燃速,与二维轴对称仿真结果进行了对比.计算结果表明：装药截面的火焰层形状与装药星孔型面形状相似,但火焰层厚度与位置在星根与星角处存在差异;随着轴向位置的增加,氧化剂不断消耗,火焰层向通道中心移动;固体燃料燃速与氧化剂流率及不同装药位置有关,其大小随氧化剂流率的增加而增加,星根处燃速比星角处大;在相同氧化剂流率下,三维星形装药比二维轴对称装药的平均固体燃料燃速大.%According to the coupling between the solid fuel and gaseous phases, the sol- id fuel regression rate model was established. Three-dimensional numerical simulation of a star-shaped fuel grain hybrid rocket motor with hydrogen peroxide （H2O2） and hydroxyl- terminated polybutadiene （HTPB） propellants combination was presented. The flow field and the solid fuel grain regression rate distribution were obtained, and the results were com- pared with that of two-dimensional axial symmetry engine. The results indicate that the flame layer profile is similar with the star-shaped fuel port, while the thickness and the loca- tion of the flame makes differences in the root and the slot of the star-shape. With the axial coordinate increasing, the oxidizer consumes continually, and the flame layer shifts toward the centre of the fuel grain port. The solid fuel regression rate relates with the oxidizer mass flux and solid fuel location. It increases with the oxidizer mass flux growing, and is higher in the root of the star-shape than in the slot. The solid fuel regression rate of three-dimen-sional fuel grain is larger than two-dimensional axial symmetry under the same oxidizer mass
Hybrid Method Simulation of Slender Marine Structures
DEFF Research Database (Denmark)
Christiansen, Niels Hørbye
This present thesis consists of an extended summary and five appended papers concerning various aspects of the implementation of a hybrid method which combines classical simulation methods and artificial neural networks. The thesis covers three main topics. Common for all these topics...... is that they deal with time domain simulation of slender marine structures such as mooring lines and flexible risers used in deep sea offshore installations. The first part of the thesis describes how neural networks can be designed and trained to cover a large number of different sea states. Neural networks can...... that a single neural network can cover all relevant sea states. The applicability and performance of the present hybrid method is demonstrated on a numerical model of a mooring line attached to a floating offshore platform. The second part of the thesis demonstrates how sequential neural networks can be used...
Numerical simulations of pendant droplets
Pena, Carlos; Kahouadji, Lyes; Matar, Omar; Chergui, Jalel; Juric, Damir; Shin, Seungwon
2015-11-01
We simulate the evolution of a three-dimensional pendant droplet through pinch-off using a new parallel two-phase flow solver called BLUE. The parallelization of the code is based on the technique of algebraic domain decomposition where the velocity field is solved by a parallel GMRes method for the viscous terms and the pressure by a parallel multigrid/GMRes method. Communication is handled by MPI message passing procedures. The method for the treatment of the fluid interfaces uses a hybrid Front Tracking/Level Set technique which defines the interface both by a discontinuous density field as well as by a local triangular Lagrangian mesh. This structure allows the interface to undergo large deformations including the rupture and coalescence of fluid interfaces. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.
NUMERICAL SIMULATION OF INSECT FLIGHT
Institute of Scientific and Technical Information of China (English)
CHENG Mu-lin; MIAO Wen-bo; ZHONG Chang-sheng
2006-01-01
In the non-inertial coordinates attached to the model wing, the two-dimensional unsteady flow field triggered by the motion of the model wing, similar to the flapping of the insect wings, was numerically simulated. One of the advantages of our method is that it has avoided the difficulty related to the moving-boundary problem. Another advantage is that the model has three degrees of freedom and can be used to simulate arbitrary motions of a two-dimensional wing in plane only if the motion is known. Such flexibility allows us to study how insects control their flying. Our results show that there are two parameters that are possibly utilized by insects to control their flight: the phase difference between the wing translation and rotation, and the lateral amplitude of flapping along the direction perpendicular to the average flapping plane.
Dense magnetized plasma numerical simulations
Energy Technology Data Exchange (ETDEWEB)
Bilbao, L [INFIP-CONICET, and Physics Department (FCEN-UBA), Ciudad Universitaria, Pab. I, 1428 Buenos Aires (Argentina); Bernal, L, E-mail: bilbao@df.uba.a [Physics Department (FCEYN-UNMDP), Complejo Universitario, Funes y Pena, 7600 Mar del Plata (Argentina)
2010-06-15
The scope for developing the present numerical method was to perform parametric studies for optimization of several configurations in magnetized plasmas. Nowadays there exist several efficient numerical codes in the subject. However, the construction of one's own computational codes brings the following important advantages: (a) to get a deeper knowledge of the physical processes involved and the numerical methods used to simulate them and (b) more flexibility to adapt the code to particular situations in a more efficient way than would be possible for a closed general code. The code includes ion viscosity, thermal conduction (electrons and ions), magnetic diffusion, thermonuclear or chemical reaction, Bremsstrahlung radiation, and equation of state (from the ideal gas to the degenerate electron gas). After each calculation cycle, mesh vertices are moved arbitrarily over the fluid. The adaptive method consists of shifting mesh vertices over the fluid in order to keep a reasonable mesh structure and increase the spatial resolution where the physical solution demands. The code was a valuable tool for parametric study of different physical problems, mainly optimization of plasma focus machine, detonation and propagation of thermonuclear reactions and Kelvin-Helmholtz instabilities in the boundary layer of the terrestrial magnetopause.
Numerical simulation of transonic flows in diffusers
Liou, M.-S.; Coakley, T. J.; Bergmann, M. Y.
1981-01-01
Numerical simulations were made of two-dimensional transonic flows in diffusers, including flow separation induced by a shock or adverse pressure gradient. The mass-averaged, time-dependent, compressible Navier-Stokes equations, simplified by the thin-layer approximation, were solved using MacCormack's hybrid method. The eddy-viscosity formulation was described by the Wilcox-Rubesin's two-equation, k-omega model. Detailed comparison of the computed results with measurements showed good agreement in all cases, including one with massive separation induced by a strong shock. The computation correctly predicted the details of a distinct lambda shock pattern, closely duplicating the configuration observed experimentally in spark-schlieren photographs.
Numerical Simulation on New Perforator
Institute of Scientific and Technical Information of China (English)
姚志华; 王志军; 李德战; 付盟
2011-01-01
To study a new shaped charge of perforator, the jet formation and penetration processes in concrete targets are simulated numerically by using LS-DYNA finite element analysis software. The results show that the cylindrical liner can form jet and most materials on top of liner form the tip of jet, while the others form the tail of jet. The jet has a better continuity, and the ratio of cumulative jet length to the liner diameter can reach to 7.56. Furthermore, the ratio of bore diameter to the liner diameter is from 0. 36 and 1, and the ratio of penetration depth to the liner diameter can be up to 5.5.
Relativistic Positioning Systems: Numerical Simulations
Puchades, Neus
2014-01-01
The motion of satellite constellations similar to GPS and Galileo is numerically simulated and, then, the region where bifurcation (double positioning) occurs is appropriately represented. In the cases of double positioning, the true location may be found using additional information (angles or times). The zone where the Jacobian, J, of the transformation from inertial to emission coordinates vanishes is also represented and interpreted. It is shown that the uncertainties in the satellite world lines produce positioning errors, which depend on the value of |J|. The smaller this quantity the greater the expected positioning errors. Among all the available 4-tuples of satellites, the most appropriate one -for a given location- should minimize positioning errors (large enough |J| values) avoiding bifurcation. Our study is particularly important to locate objects which are far away from Earth, e.g., satellites.
Numerical and Experimental Investigation of Hybrid Rocket Motors Transient Behavior
Barato, Francesco
2013-01-01
As the space business is shifting from pure performances to affordability a renewed interest is growing about hybrid rocket propulsion. Hybrid rocket motors are attractive for their inherent advantages like simplicity, reliability, safety and reduced costs. Moreover hybrid motors are easy to throttle and thus they are ideal candidate when soft-landing or energy management capabilities are required. This thesis is mainly involved with a theoretical/numerical study of hybrid transie...
Temperature field simulation of laser-TIG hybrid welding
Institute of Scientific and Technical Information of China (English)
陈彦宾; 李俐群; 方俊飞; 封小松; 吴林
2003-01-01
The three-dimensional transient temperature distribution of laser-TIG hybrid welding was analyzed and simulated numerically. Calculations were based on a finite element model, in which the physical process of hybrid welding was studied and the coupling effect of the laser and arc in the hybrid process was fully considered. The temperature fields and weld cross-sections of the typical welding parameters are obtained using present model. The calculation results show that the model can indicate the relationship of energy match between laser and arc to joints cross-sections objectively, and the simulation results are well agreed with the experimental results.
Numerical Simulation and Experimental Validation of Guided Ditching Tests
Siemann, Martin; Kohlgrüber, Dieter; Benítez Montañés, Luis; Iafrati, Alessandro
2014-01-01
The oblique water entry of structures with high horizontal speed is investigated in this work. First, the necessity of aircraft ditching analysis as well as the requirements for numerical tools to simulate aircraft ditching are described. The paper provides a brief explanation of an extensive experimental campaign of guided ditching tests carried out in the SMAES project. These tests are then simulated using a hybrid Smoothed Particle Hydrodynamics - Finite Elements modeling approach. Most re...
Numerical Simulations of Granular Processes
Richardson, Derek C.; Michel, Patrick; Schwartz, Stephen R.; Ballouz, Ronald-Louis; Yu, Yang; Matsumura, Soko
2014-11-01
Spacecraft images and indirect observations including thermal inertia measurements indicate most small bodies have surface regolith. Evidence of granular flow is also apparent in the images. This material motion occurs in very low gravity, therefore in a completely different gravitational environment than on the Earth. Understanding and modeling these motions can aid in the interpretation of imaged surface features that may exhibit signatures of constituent material properties. Also, upcoming sample-return missions to small bodies, and possible future manned missions, will involve interaction with the surface regolith, so it is important to develop tools to predict the surface response. We have added new capabilities to the parallelized N-body gravity tree code pkdgrav [1,2] that permit the simulation of granular dynamics, including multi-contact physics and friction forces, using the soft-sphere discrete-element method [3]. The numerical approach has been validated through comparison with laboratory experiments (e.g., [3,4]). Ongoing and recently completed projects include: impacts into granular materials using different projectile shapes [5]; possible tidal resurfacing of asteroid Apophis during its 2029 encounter [6]; the Brazil-nut effect in low gravity [7]; and avalanche modeling.Acknowledgements: DCR acknowledges NASA (grants NNX08AM39G, NNX10AQ01G, NNX12AG29G) and NSF (AST1009579). PM acknowledges the French agency CNES. SRS works on the NEOShield Project funded under the European Commission’s FP7 program agreement No. 282703. SM acknowledges support from the Center for Theory and Computation at U Maryland and the Dundee Fellowship at U Dundee. Most simulations were performed using the YORP cluster in the Dept. of Astronomy at U Maryland and on the Deepthought High-Performance Computing Cluster at U Maryland.References: [1] Richardson, D.C. et al. 2000, Icarus 143, 45; [2] Stadel, J. 2001, Ph.D. Thesis, U Washington; [3] Schwartz, S.R. et al. 2012, Gran
Numerical simulation package for speckle metrology
Kornis, Janos; Bokor, Nandor; Nemeth, Attila
1998-09-01
A computer program package for numerical simulation of speckle phenomena has been developed. It is suitable for simulating both objective and subjective speckle effects in various optical setups. Several simulation results are presented in this paper. The simulations was made in UNIX and Windows NT environment.
Hybrid2 - The hybrid power system simulation model
Energy Technology Data Exchange (ETDEWEB)
Baring-Gould, E.I.; Green, H.J.; Dijk, V.A.P. van [National Renewable Energy Lab., Golden, CO (United States); Manwell, J.F. [Univ. of Massachusetts, Amherst, MA (United States)
1996-12-31
There is a large-scale need and desire for energy in remote communities, especially in the developing world; however the lack of a user friendly, flexible performance prediction model for hybrid power systems incorporating renewables hindered the analysis of hybrids as options to conventional solutions. A user friendly model was needed with the versatility to simulate the many system locations, widely varying hardware configurations, and differing control options for potential hybrid power systems. To meet these ends, researchers from the National Renewable Energy Laboratory (NREL) and the University of Massachusetts (UMass) developed the Hybrid2 software. This paper provides an overview of the capabilities, features, and functionality of the Hybrid2 code, discusses its validation and future plans. Model availability and technical support provided to Hybrid2 users are also discussed. 12 refs., 3 figs., 4 tabs.
Numerical simulation of the RAMAC benchmark test
Energy Technology Data Exchange (ETDEWEB)
Leblanc, J.E.; Sugihara, M.; Fujiwara, T. [Nagoya Univ. (Japan). Dept. of Aerospace Engineering; Nusca, M. [Nagoya Univ. (Japan). Dept. of Aerospace Engineering; U.S. Army Research Lab., Ballistics and Weapons Concepts Div., AMSRL-WM-BE, Aberdeen Proving Ground, MD (United States); Wang, X. [Nagoya Univ. (Japan). Dept. of Aerospace Engineering; School of Mechanical and Production Engineering, Nanyang Technological Univ. (Singapore); Seiler, F. [Nagoya Univ. (Japan). Dept. of Aerospace Engineering; French-German Research Inst. of Saint-Louis, ISL, Saint-Louis (France)
2000-11-01
Numerical simulations of the same ramac geometry and boundary conditions by different numerical and physical models highlight the variety of solutions possible and the strong effect of the chemical kinetics model on the solution. The benchmark test was defined and announced within the community of ramac researchers. Three laboratories undertook the project. The numerical simulations include Navier-Stokes and Euler simulations with various levels of physical models and equations of state. The non-reactive part of the simulation produced similar steady state results in the three simulations. The chemically reactive part of the simulation produced widely different outcomes. The original experimental data and experimental conditions are presented. A description of each computer code and the resulting flowfield is included. A comparison between codes and results is achieved. The most critical choice for the simulation was the chemical kinetics model. (orig.)
Numerical simulation of muzzle blast
Tyler-Street, M.
2014-01-01
Structural design methods for naval ships include environmental, operational and military load cases. One of the operational loads acting on a typical naval vessel is the muzzle blast from a gun. Simulating the muzzle blast load acting on a ship structure with CFD and ALE methods leads to large nume
Numerical Simulations of HH 555
Kajdic, Primoz
2007-01-01
We present 3D gasdynamic simulations of the Herbig Haro object HH 555. HH 555 is a bipolar jet emerging from the tip of an elephant trunk entering the Pelican Nebula from the adjacent molecular cloud. Both beams of HH 555 are curved away from the center of the H II region. This indicates that they are being deflected by a side-wind probably coming from a star located inside the nebula or by the expansion of the nebula itself. HH 555 is most likely an irradiated jet emerging from a highly embedded protostar, which has not yet been detected. In our simulations we vary the incident photon flux, which in one of our models is equal to the flux coming from a star 1 pc away emitting 5x10^48 ionizing (i. e., with energies above the H Lyman limit) photons per second. An external, plane-parallel flow (a ``side-wind'') is coming from the same direction as the photoionizing flux. We have made four simulations, decreasing the photon flux by a factor of 10 in each simulation. We discuss the properties of the flow and we co...
Design and numerical simulation of novel DBRs
Institute of Scientific and Technical Information of China (English)
Wei Su (苏伟); Jingchang Zhong (钟景昌); Wenli Liu (刘文莉); Yan-Kuin Su (苏炎坤); Shoou-Jinn Chang (张守进); Hsin-Chieh Yu (龙信介); Liangwen Ji (姬梁文); Lin Li (李林); Yingjie Zhao (赵英杰)
2003-01-01
In this paper, a numerical simulation of the traditional graded distributed Bragg reflector (DBR) and a design of the novel DBR with short period superlattices (SPSs DBR) used by vertical cavity surface emitting laser (VCSEL) are reported. First, the optical characteristic matrix of the graded DBRs is derived using the theories of thin film optics. Second, its reflective spectrum is numerical simulated and it is found that the simulative results are similar with the experimental data. The difference of the cavity mode position between the experimental and simulative data is discussed. Finally, based on the simulative results of graded DBR, a novel DBR with 4.5-pair GaAs/AlAs SPSs is designed, and its reflective spectrum is numerical simulated and analyzed.
Numerical Simulations of Bouncing Jets
Bonito, Andrea; Lee, Sanghyun
2015-01-01
Bouncing jets are fascinating phenomenons occurring under certain conditions when a jet impinges on a free surface. This effect is observed when the fluid is Newtonian and the jet falls in a bath undergoing a solid motion. It occurs also for non-Newtonian fluids when the jets falls in a vessel at rest containing the same fluid. We investigate numerically the impact of the experimental setting and the rheological properties of the fluid on the onset of the bouncing phenomenon. Our investigations show that the occurrence of a thin lubricating layer of air separating the jet and the rest of the liquid is a key factor for the bouncing of the jet to happen. The numerical technique that is used consists of a projection method for the Navier-Stokes system coupled with a level set formulation for the representation of the interface. The space approximation is done with adaptive finite elements. Adaptive refinement is shown to be very important to capture the thin layer of air that is responsible for the bouncing.
Numerical simulations of quasar absorbers
Theuns, T
2005-01-01
The physical state of the intergalactic medium can be probed in great detail with the intervening absorption systems seen in quasar spectra. The properties of the Hydrogen absorbers depend on many cosmological parameters, such as the matter-power spectrum, reionisation history, ionising background and the nature of the dark matter. The spectra also contain metal lines, which can be used to constrain the star formation history and the feedback processes acting in large and small galaxies. Simulations have been instrumental in investigating to what extent these parameters can be unambiguously constrained with current and future data. This paper is meant as an introduction to this subject, and reviews techniques and methods for simulating the intergalactic medium.
NUMERICAL SIMULATIONS OF CAVITATING FLOWS
Institute of Scientific and Technical Information of China (English)
Wu Lei
2003-01-01
A new model, which involves viscous and multi-phase effects, was given to study cavitating flows. A local compressible model was established by introducing a density-pressure function to account for the two-phase flow of water/vapor and the transition from one phase to the other. An algorithm for calculating variable-density N-S equations of cavitating flow problem was put forward. The present method yields reasonable results for both steady and unsteady cavitating flows in 2D and 3D cases. The numerical results of unsteady character of cavitating flows around hydrofoils coincide well with experimental data. It indicates the feasibility to apply this method to a variety of cavitating flows of practical problems.
Numerical methods in simulation of resistance welding
DEFF Research Database (Denmark)
Nielsen, Chris Valentin; Martins, Paulo A.F.; Zhang, Wenqi
2015-01-01
Finite element simulation of resistance welding requires coupling betweenmechanical, thermal and electrical models. This paper presents the numerical models and theircouplings that are utilized in the computer program SORPAS. A mechanical model based onthe irreducible flow formulation is utilized...... a resistance welding point of view, the most essential coupling between the above mentioned models is the heat generation by electrical current due to Joule heating. The interaction between multiple objects is anothercritical feature of the numerical simulation of resistance welding because it influences...
Numerical simulations of rotating axisymmetric sunspots
Botha, G. J. J.; Busse, F.H.; Hurlburt, N. E.; Rucklidge, A.M.
2008-01-01
A numerical model of axisymmetric convection in the presence of a vertical magnetic flux bundle and rotation about the axis is presented. The model contains a compressible plasma described by the nonlinear MHD equations, with density and temperature gradients simulating the upper layer of the sun's convection zone. The solutions exhibit a central magnetic flux tube in a cylindrical numerical domain, with convection cells forming collar flows around the tube. When the numerical domain is rotat...
Numerical simulations of rotating axisymmetric sunspots
Botha, Gert; Busse, F.H.; Hurlburt, Neal; Rucklidge, Alistair
2008-01-01
A numerical model of axisymmetric convection in the presence of a vertical magnetic flux bundle and rotation about the axis is presented. The model contains a compressible plasma described by the non-linear MHD equations, with density and temperature gradients simulating the upper layer of the Sun’s convection zone. The solutions exhibit a central magnetic flux tube in a cylindrical numerical domain, with convection cells forming collar flows around the tube. When the numerical domain is rota...
Numerical simulation of mechatronic sensors and actuators
Kaltenbacher, Manfred
2007-01-01
Focuses on the physical modeling of mechatronic sensors and actuators and their precise numerical simulation using the Finite Element Method (FEM). This book discusses the physical modeling as well as numerical computation. It also gives a comprehensive introduction to finite elements, including their computer implementation.
Numerical simulation of multi-fluid shock-turbulence interaction
Tian, Yifeng; Jaberi, Farhad; Livescu, Daniel; Li, Zhaorui
2017-01-01
Accurate numerical simulation of multi-fluid Shock-Turbulence Interaction (STI) is conducted by a hybrid monotonicity preserving-compact finite difference scheme for a detailed study of STI in variable density flows. Theoretical and numerical assessments of data confirm that all turbulence scales as well as the STI are well captured by the computational method. Comparison of multi-fluid and single-fluid data indicates that the turbulent kinetic energy is amplified more and the scalar mixing is enhanced more by the shock in flows involving two different fluids/densities when compared with those observed in single-fluid flows.
Simulation of a Hybrid Locomotion Robot Vehicle
Aarnio, P.
2002-10-01
This study describes a simulation process of a mobile robot. The focus is in kinematic and dynamic behavior simulations of hybrid locomotion robot vehicles. This research is motivated by the development needs of the WorkPartner field service robot. The whole robot system consists of a mobile platform and a two-hand manipulator. The robot platform, called Hybtor, is a hybrid locomotion robot capable of walking and driving by wheels as well as combining these two locomotion modes. This study describes first the general problems and their solutions in the dynamic simulation of mobile robots. A kinematic and dynamic virtual model of the Hybtor robot was built and simulations were carried out using one commercial simulation tool. Walking, wheel driven and rolking mode locomotion, which is a special hybrid locomotion style, has been simulated and analyzed. Position and force control issues during obstacle overrun and climbing were also studied.
Terrana, S.; Vilotte, J. P.; Guillot, L.
2015-12-01
New seismological monitoring networks combine broadband seismic receivers, hydrophones and micro-barometers antenna, providing complementary observation of source-radiated waves. Exploiting these observations requires accurate and multi-media - elastic, hydro-acoustic, infrasound - wave simulation methods, in order to improve our physical understanding of energy exchanges at material interfaces.We present here a new development of a high-order Hybridized Discontinuous Galerkin (HDG) method, for the simulation of coupled seismic and acoustic wave propagation, within a unified framework ([1],[2]) allowing for continuous and discontinuous Spectral Element Methods (SEM) to be used in the same simulation, with conforming and non-conforming meshes. The HDG-SEM approximation leads to differential - algebraic equations, which can be solved implicitly using energy-preserving time-schemes.The proposed HDG-SEM is computationally attractive, when compared with classical Discontinuous Galerkin methods, involving only the approximation of the single-valued traces of the velocity field along the element interfaces as globally coupled unknowns. The formulation is based on a variational approximation of the physical fluxes, which are shown to be the explicit solution of an exact Riemann problem at each element boundaries. This leads to a highly parallel and efficient unstructured and high-order accurate method, which can be space-and-time adaptive.A numerical study of the accuracy and convergence of the HDG-SEM is performed through a number of case studies involving elastic-acoustic (infrasound) coupling with geometries of increasing complexity. Finally, the performance of the method is illustrated through realistic case studies involving ground wave propagation associated to topography effects.In conclusion, we outline some on-going extensions of the method.References:[1] Cockburn, B., Gopalakrishnan, J., Lazarov, R., Unified hybridization of discontinuous Galerkin, mixed and
Numerical simulations of the solar atmosphere
Leenaarts, J.
2007-01-01
In this thesis several aspects of the solar atmosphere are investigated using numerical simulations. Simulations and observations of reversed solar granulation are compared. It is concluded that reversed granulation is a hydrodynamical process and is a consequence of convection reversal. Images are
Numerical Simulation of Nanostructure Growth
Hwang, Helen H.; Bose, Deepak; Govindan, T. R.; Meyyappan, M.
2004-01-01
Nanoscale structures, such as nanowires and carbon nanotubes (CNTs), are often grown in gaseous or plasma environments. Successful growth of these structures is defined by achieving a specified crystallinity or chirality, size or diameter, alignment, etc., which in turn depend on gas mixture ratios. pressure, flow rate, substrate temperature, and other operating conditions. To date, there has not been a rigorous growth model that addresses the specific concerns of crystalline nanowire growth, while demonstrating the correct trends of the processing conditions on growth rates. Most crystal growth models are based on the Burton, Cabrera, and Frank (BCF) method, where adatoms are incorporated into a growing crystal at surface steps or spirals. When the supersaturation of the vapor is high, islands nucleate to form steps, and these steps subsequently spread (grow). The overall bulk growth rate is determined by solving for the evolving motion of the steps. Our approach is to use a phase field model to simulate the growth of finite sized nanowire crystals, linking the free energy equation with the diffusion equation of the adatoms. The phase field method solves for an order parameter that defines the evolving steps in a concentration field. This eliminates the need for explicit front tracking/location, or complicated shadowing routines, both of which can be computationally expensive, particularly in higher dimensions. We will present results demonstrating the effect of process conditions, such as substrate temperature, vapor supersaturation, etc. on the evolving morphologies and overall growth rates of the nanostructures.
Multistage Turbomachinery Flows Simulated Numerically
Hathaway, Michael D.; Adamczyk, John J.; Shabbir, Aamir; Wellborn, Steven R.
1999-01-01
At the NASA Lewis Research Center, a comprehensive assessment was made of the predictive capability of the average passage flow model as applied to multistage axial-flow compressors. This model, which describes the time-averaged flow field within a typical passage of a blade row embedded in a multistage configuration, is being widely used throughout U.S. aircraft industry as an integral part of their design systems. Rotor flow-angle deviation. In this work, detailed data taken within a four and one-half stage large low-speed compressor were used to assess the weaknesses and strengths of the predictive capabilities of the average passage flow model. The low-speed compressor blading is of modern design and employs stator end-bends. Measurements were made with slow- and high response instrumentation. The high-response measurements revealed the velocity components of both the rotor and stator wakes. From the measured wake profiles, we found that the flow exiting the rotors deviated from the rotor exit metal angle to a lesser degree than was predicted by the average passage flow model. This was found to be due to blade boundary layer transition, which recently has been shown to exist on multistage axial compressor rotor and stator blades, but was not accounted for in the average passage model. Consequently, a model that mimics the effects of blade boundary layer transition, Shih k-epsilon model, was incorporated into the average passage model. Simulations that incorporated this transition model showed a dramatic improvement in agreement with data. The altered model thus improved predictive capability for multistage axial-flow compressors, and this was verified by detailed experimental measurement.
On the numerical simulation of machining processes
Vaz Jr.,M.
2000-01-01
Numerical simulation of machining processes can be traced back to the early seventies when finite element models for continuous chip formation were proposed. The advent of fast computers and development of new techniques to model large plastic deformations have favoured machining simulation. Relevant aspects of finite element simulation of machining processes are discussed in this paper, such as solution methods, material models, thermo-mechanical coupling, friction models, chip separation an...
Boundary acquisition for setup of numerical simulation
Energy Technology Data Exchange (ETDEWEB)
Diegert, C. [Sandia National Lab., Albuquerque, NM (United States)
1997-12-31
The author presents a work flow diagram that includes a path that begins with taking experimental measurements, and ends with obtaining insight from results produced by numerical simulation. Two examples illustrate this path: (1) Three-dimensional imaging measurement at micron scale, using X-ray tomography, provides information on the boundaries of irregularly-shaped alumina oxide particles held in an epoxy matrix. A subsequent numerical simulation predicts the electrical field concentrations that would occur in the observed particle configurations. (2) Three-dimensional imaging measurement at meter scale, again using X-ray tomography, provides information on the boundaries fossilized bone fragments in a Parasaurolophus crest recently discovered in New Mexico. A subsequent numerical simulation predicts acoustic response of the elaborate internal structure of nasal passageways defined by the fossil record. The author must both add value, and must change the format of the three-dimensional imaging measurements before the define the geometric boundary initial conditions for the automatic mesh generation, and subsequent numerical simulation. The author applies a variety of filters and statistical classification algorithms to estimate the extents of the structures relevant to the subsequent numerical simulation, and capture these extents as faceted geometries. The author will describe the particular combination of manual and automatic methods used in the above two examples.
Numerical Simulation of a Hypersonic Air Intake
Directory of Open Access Journals (Sweden)
Soumyajit Saha
2015-05-01
Full Text Available Numerical simulations were carried out to study the unsteady flow in an intake of hypersonic air-breathing vehicle. Unsteady RANS simulations were performed to examine started flow of the intake when cowl surface is parallel to the ramp surface. Though started, the flow was unsteady due to flow separation bubbles inside intake. Intake with larger cowl opening at which intake unstarted was also simulated. Simulations indicated unstarted flow, with large pressure oscillations. The numerically simulation results match reasonably well with experimental data. Calculated unstarting Mach number was found to be 3.0-3.2 in comparison of wind tunnel data of 3.6 for the same cowl opening angle.Defence Science Journal, Vol. 65, No. 3, May 2015, pp.189-195, DOI: http://dx.doi.org/10.14429/dsj.65.8254
Numerical Simulation of Underwater Explosion Loads
Institute of Scientific and Technical Information of China (English)
XIN Chunliang; XU Gengguang; LIU Kezhong
2008-01-01
Numerical simulation of TNT underwater explosion was carried out with AUTODYN software.Influences of artificial viscosity and mesh density on simulation results were discussed.Detonation waves in explosive and shock wave in water during early time of explosion are high frequency waves.Fine meshes (less than 1 mm) in explosive and water nearby,and small linear viscosity coefficients and quadratic viscosity coefficients (0.02 and 0.1 respectively,1/10 of default values) are needed in numerical simulation model.According to these rules,numerical computing pressure profiles can match well with those calculated by Zamyshlyayev empirical formula.Otherwise peak pressure would be smeared off and upstream relative errors would be cumulated downstream to make downstream peak pressure lower.
Numerical simulation of "An American Haboob"
Vukovic, A; M. Vujadinovic; Pejanovic, G.; J. Andric; Kumjian, M. R.; V. Djurdjevic; M. Dacic; Prasad, A. K.; H. M. El-Askary; B. C. Paris; S. Petkovic; S. Nickovic; Sprigg, W. A.
2013-01-01
A dust storm of fearful proportions hit Phoenix in the early evening hours of 5 July 2011. This storm, an American haboob, was predicted hours in advance because numerical, land-atmosphere modeling, computing power and remote sensing of dust events have improved greatly over the past decade. High resolution numerical models are required for accurate simulation of the small-scales of the haboob process, with high velocity surface winds produced by strong convection and severe downbursts...
Study of Cardiac Defibrillation Through Numerical Simulations
Bragard, J.; Marin, S.; Cherry, E. M.; Fenton, F. H.
Three-dimensional numerical simulations of the defibrillation problem are presented. In particular, in this study we use the rabbit ventricular geometry as a realistic model system for evaluating the efficacy of defibrillatory shocks. Statistical data obtained from the simulations were analyzed in term of a dose-response curve. Good quantitative agreement between our numerical results and clinically relevant values is obtained. An electric field strength of about 6.6 V/cm indicates a fifty percent probability of successful defibrillation for a 12-ms monophasic shock. Our validated model will be useful for optimizing defibrillation protocols.
NUMERICAL SIMULATION OF SEPARATED FLOW NEAR GROYNE
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
A numerical model was developed to simulate flow around non-submeged groyne in two dimensions, which was based on N-S equations with Smagorinsky's subgrid-scale turbulence model. Flow phenomenon and results measured practically agree with the calculation results very well, and this model could be used to simulate the characteristics of the eddies of upper and down reaches around spur-dikes successfully.
Hybrid simulation models of production networks
Kouikoglou, Vassilis S
2001-01-01
This book is concerned with a most important area of industrial production, that of analysis and optimization of production lines and networks using discrete-event models and simulation. The book introduces a novel approach that combines analytic models and discrete-event simulation. Unlike conventional piece-by-piece simulation, this method observes a reduced number of events between which the evolution of the system is tracked analytically. Using this hybrid approach, several models are developed for the analysis of production lines and networks. The hybrid approach combines speed and accuracy for exceptional analysis of most practical situations. A number of optimization problems, involving buffer design, workforce planning, and production control, are solved through the use of hybrid models.
Numerical simulation of polariton Bose gas thermalization
Kartsev, P. F.; Kuznetsov, I. O.
2016-08-01
In this work, we present the numerical simulation of the process a Bose gas thermalization and the formation of the condensate. Our approach is based on kinetic equations and “Fermi's golden rule” in the incoherent approximation. Direct summation of terms is performed using GPGPU OpenCL parallel code using AMD Radeon HD 7970.
Spectral Methods in Numerical Plasma Simulation
DEFF Research Database (Denmark)
Coutsias, E.A.; Hansen, F.R.; Huld, T.;
1989-01-01
An introduction is given to the use of spectral methods in numerical plasma simulation. As examples of the use of spectral methods, solutions to the two-dimensional Euler equations in both a simple, doubly periodic region, and on an annulus will be shown. In the first case, the solution is expanded...
Numerical Simulations of a Vibrating Elasticum
DEFF Research Database (Denmark)
Sinclair, Robert
1999-01-01
Two robust numerical algorithms for simulating the dynamics of a clamped, massless, incompressibleelasticum with a unit point mass at the free end are presented, along with some first results concerning various modes of oscillation, and further data with some relevance to the question of whether...
Database application platform for earthquake numerical simulation
Institute of Scientific and Technical Information of China (English)
LUO Yan; ZHENG Yue-jun; CHEN Lian-wang; LU Yuan-zhong; HUANG Zhong-xian
2006-01-01
@@ Introduction In recent years, all kinds of observation networks of seismology have been established, which have been continuously producing numerous digital information. In addition, there are many study results about 3D velocity structure model and tectonic model of crust (Huang and Zhao, 2006; Huang et al, 2003; Li and Mooney, 1998),which are valuable for studying the inner structure of the earth and earthquake preparation process. It is badly needed to combine the observed data, experimental study and theoretical analyses results by the way of numerical simulation and develop a database and a corresponding application platform to be used by numerical simulation,and is also a significant way to promote earthquake prediction.
Cai, Guobiao; Li, Chengen; Tian, Hui
2016-11-01
This paper is aimed to analyze heat transfer in injector plate of hydrogen peroxide hybrid rocket motor by two-dimensional axisymmetric numerical simulations and full-scale firing tests. Long-time working, which is an advantage of hybrid rocket motor over conventional solid rocket motor, puts forward new challenges for thermal protection. Thermal environments of full-scale hybrid rocket motors designed for long-time firing tests are studied through steady-state coupled numerical simulations of flow field and heat transfer in chamber head. The motor adopts 98% hydrogen peroxide (98HP) oxidizer and hydroxyl-terminated poly-butadiene (HTPB) based fuel as the propellants. Simulation results reveal that flowing liquid 98HP in head oxidizer chamber could cool the injector plate of the motor. The cooling of 98HP is similar to the regenerative cooling in liquid rocket engines. However, the temperature of the 98HP in periphery portion of the head oxidizer chamber is higher than its boiling point. In order to prevent the liquid 98HP from unexpected decomposition, a thermal protection method for chamber head utilizing silica-phenolics annular insulating board is proposed. The simulation results show that the annular insulating board could effectively decrease the temperature of the 98HP in head oxidizer chamber. Besides, the thermal protection method for long-time working hydrogen peroxide hybrid rocket motor is verified through full-scale firing tests. The ablation of the insulating board in oxygen-rich environment is also analyzed.
Numerical Simulation of Asynchronous Simulated Moving Bed Chromatography
Institute of Scientific and Technical Information of China (English)
卢建刚
2004-01-01
Asynchronous simulated moving bed chromatography (ASMBC), known also as the "VARICOL" process, is more efficient and flexible than the well-known and traditional simulated moving bed chromatography (SMBC). A detailed model of ASMBC, taking account of non-linear competitive isotherms, mass transfer parameters, and complex port switching schedule parameters, was developed to simulate the complex dynamics of ASMBC.The simulated performance is in close agreement with the experimental data of chiral separation reported in the literature. The simulation results show that ASMBC can achieve the performance similar to SMBC with fewer columns and can achieve better performance than SMBC with the same total column number. All design and operation parameters can be chosen correctly by numerical simulation. This detailed ASMBC model and the numerical technique are useful for design, operation, optimization and scale-up of ASMBC.
Numerical investigation of magnetic sensor for DNA hybridization detection using planar transformer
Directory of Open Access Journals (Sweden)
Sayyed M. Azimi
2007-12-01
Full Text Available This paper introduces a sensor for detection of DNA hybridization and investigates its performance by means of computer simulation. A planar transformer with spiral windings is proposed for hybridization detection. In order to detect the occurrence of hybridization, single strand target DNA’s are tagged with magnetic beads. Target DNA’s are then exposed to known single strand probe DNA’s which are immobilized on the surface of a functionalized layer in the proximity of the sensor. The primary winding of the transformer is driven by an AC current source. The voltage at the secondary winding is used for detection. Once the hybridization is occurred, a layer of magnetic material is formed and the coupling between the windings is varied. These variations are reflected into the detecting output voltage. The magnitude of the output voltage is numerically calculated in terms of geometrical and physical parameters and the parameter values resulting in maximum response are derived.
Fluid dynamics theory, computation, and numerical simulation
Pozrikidis, C
2001-01-01
Fluid Dynamics Theory, Computation, and Numerical Simulation is the only available book that extends the classical field of fluid dynamics into the realm of scientific computing in a way that is both comprehensive and accessible to the beginner The theory of fluid dynamics, and the implementation of solution procedures into numerical algorithms, are discussed hand-in-hand and with reference to computer programming This book is an accessible introduction to theoretical and computational fluid dynamics (CFD), written from a modern perspective that unifies theory and numerical practice There are several additions and subject expansions in the Second Edition of Fluid Dynamics, including new Matlab and FORTRAN codes Two distinguishing features of the discourse are solution procedures and algorithms are developed immediately after problem formulations are presented, and numerical methods are introduced on a need-to-know basis and in increasing order of difficulty Matlab codes are presented and discussed for a broad...
Fluid Dynamics Theory, Computation, and Numerical Simulation
Pozrikidis, Constantine
2009-01-01
Fluid Dynamics: Theory, Computation, and Numerical Simulation is the only available book that extends the classical field of fluid dynamics into the realm of scientific computing in a way that is both comprehensive and accessible to the beginner. The theory of fluid dynamics, and the implementation of solution procedures into numerical algorithms, are discussed hand-in-hand and with reference to computer programming. This book is an accessible introduction to theoretical and computational fluid dynamics (CFD), written from a modern perspective that unifies theory and numerical practice. There are several additions and subject expansions in the Second Edition of Fluid Dynamics, including new Matlab and FORTRAN codes. Two distinguishing features of the discourse are: solution procedures and algorithms are developed immediately after problem formulations are presented, and numerical methods are introduced on a need-to-know basis and in increasing order of difficulty. Matlab codes are presented and discussed for ...
Li, Chengen; Cai, Guobiao; Tian, Hui
2016-06-01
This paper is aimed to analyse the combustion characteristics of hybrid rocket motor with multi-section swirl injection by simulating the combustion flow field. Numerical combustion flow field and combustion performance parameters are obtained through three-dimensional numerical simulations based on a steady numerical model proposed in this paper. The hybrid rocket motor adopts 98% hydrogen peroxide and polyethylene as the propellants. Multiple injection sections are set along the axis of the solid fuel grain, and the oxidizer enters the combustion chamber by means of tangential injection via the injector ports in the injection sections. Simulation results indicate that the combustion flow field structure of the hybrid rocket motor could be improved by multi-section swirl injection method. The transformation of the combustion flow field can greatly increase the fuel regression rate and the combustion efficiency. The average fuel regression rate of the motor with multi-section swirl injection is improved by 8.37 times compared with that of the motor with conventional head-end irrotational injection. The combustion efficiency is increased to 95.73%. Besides, the simulation results also indicate that (1) the additional injection sections can increase the fuel regression rate and the combustion efficiency; (2) the upstream offset of the injection sections reduces the combustion efficiency; and (3) the fuel regression rate and the combustion efficiency decrease with the reduction of the number of injector ports in each injection section.
Methane production in simulated hybrid bioreactor landfill.
Xu, Qiyong; Jin, Xiao; Ma, Zeyu; Tao, Huchun; Ko, Jae Hac
2014-09-01
The aim of this work was to study a hybrid bioreactor landfill technology for landfill methane production from municipal solid waste. Two laboratory-scale columns were operated for about ten months to simulate an anaerobic and a hybrid landfill bioreactor, respectively. Leachate was recirculated into each column but aeration was conducted in the hybrid bioreactor during the first stage. Results showed that leachate pH in the anaerobic bioreactor maintained below 6.5, while in the hybrid bioreactor quickly increased from 5.6 to 7.0 due to the aeration. The temporary aeration resulted in lowering COD and BOD5 in the leachate. The volume of methane collected from the hybrid bioreactor was 400 times greater than that of the anaerobic bioreactor. Also, the methane production rate of the hybrid bioreactor was improved within a short period of time. After about 10 months' operation, the total methane production in the hybrid bioreactor was 212 L (16 L/kgwaste).
A hybrid parallel framework for the cellular Potts model simulations
Energy Technology Data Exchange (ETDEWEB)
Jiang, Yi [Los Alamos National Laboratory; He, Kejing [SOUTH CHINA UNIV; Dong, Shoubin [SOUTH CHINA UNIV
2009-01-01
The Cellular Potts Model (CPM) has been widely used for biological simulations. However, most current implementations are either sequential or approximated, which can't be used for large scale complex 3D simulation. In this paper we present a hybrid parallel framework for CPM simulations. The time-consuming POE solving, cell division, and cell reaction operation are distributed to clusters using the Message Passing Interface (MPI). The Monte Carlo lattice update is parallelized on shared-memory SMP system using OpenMP. Because the Monte Carlo lattice update is much faster than the POE solving and SMP systems are more and more common, this hybrid approach achieves good performance and high accuracy at the same time. Based on the parallel Cellular Potts Model, we studied the avascular tumor growth using a multiscale model. The application and performance analysis show that the hybrid parallel framework is quite efficient. The hybrid parallel CPM can be used for the large scale simulation ({approx}10{sup 8} sites) of complex collective behavior of numerous cells ({approx}10{sup 6}).
Numerical simulation of landfill aeration using computational fluid dynamics.
Fytanidis, Dimitrios K; Voudrias, Evangelos A
2014-04-01
The present study is an application of Computational Fluid Dynamics (CFD) to the numerical simulation of landfill aeration systems. Specifically, the CFD algorithms provided by the commercial solver ANSYS Fluent 14.0, combined with an in-house source code developed to modify the main solver, were used. The unsaturated multiphase flow of air and liquid phases and the biochemical processes for aerobic biodegradation of the organic fraction of municipal solid waste were simulated taking into consideration their temporal and spatial evolution, as well as complex effects, such as oxygen mass transfer across phases, unsaturated flow effects (capillary suction and unsaturated hydraulic conductivity), temperature variations due to biochemical processes and environmental correction factors for the applied kinetics (Monod and 1st order kinetics). The developed model results were compared with literature experimental data. Also, pilot scale simulations and sensitivity analysis were implemented. Moreover, simulation results of a hypothetical single aeration well were shown, while its zone of influence was estimated using both the pressure and oxygen distribution. Finally, a case study was simulated for a hypothetical landfill aeration system. Both a static (steadily positive or negative relative pressure with time) and a hybrid (following a square wave pattern of positive and negative values of relative pressure with time) scenarios for the aeration wells were examined. The results showed that the present model is capable of simulating landfill aeration and the obtained results were in good agreement with corresponding previous experimental and numerical investigations.
Hybrid simulation theory for a classical nonlinear dynamical system
Drazin, Paul L.; Govindjee, Sanjay
2017-03-01
Hybrid simulation is an experimental and computational technique which allows one to study the time evolution of a system by physically testing a subset of it while the remainder is represented by a numerical model that is attached to the physical portion via sensors and actuators. The technique allows one to study large or complicated mechanical systems while only requiring a subset of the complete system to be present in the laboratory. This results in vast cost savings as well as the ability to study systems that simply can not be tested due to scale. However, the errors that arise from splitting the system in two requires careful attention, if a valid simulation is to be guaranteed. To date, efforts to understand the theoretical limitations of hybrid simulation have been restricted to linear dynamical systems. In this work we consider the behavior of hybrid simulation when applied to nonlinear dynamical systems. As a model problem, we focus on the damped, harmonically-driven nonlinear pendulum. This system offers complex nonlinear characteristics, in particular periodic and chaotic motions. We are able to show that the application of hybrid simulation to nonlinear systems requires a careful understanding of what one expects from such an experiment. In particular, when system response is chaotic we advocate the need for the use of multiple metrics to characterize the difference between two chaotic systems via Lyapunov exponents and Lyapunov dimensions, as well as correlation exponents. When system response is periodic we advocate the use of L2 norms. Further, we are able to show that hybrid simulation can falsely predict chaotic or periodic response when the true system has the opposite characteristic. In certain cases, we are able to show that control system parameters can mitigate this issue.
TRNSYS HYBRID wind diesel PV simulator
Energy Technology Data Exchange (ETDEWEB)
Quinlan, P.J.A.; Mitchell, J.W.; Klein, S.A.; Beckman, W.A.; Blair, N.J. [Univ. of Wisconsin, Madison, WI (United States)
1996-12-31
The Solar Energy Laboratory (SEL) has developed a wind diesel PV hybrid systems simulator, UW-HYBRID 1.0, an application of the TRNSYS 14.2 time-series simulation environment. An AC/DC bus links up to five diesels and wind turbine models, along with PV modules, a battery bank, and an AC/DC converter. Multiple units can be selected. PV system simulations include solar angle and peak power tracking options. Weather data are Typical Meteorological Year data, parametrically generated synthesized data, or external data files. PV performance simulations rely on long-standing SEL-developed algorithms. Loads data are read as scalable time series. Diesel simulations include estimated fuel-use and waste heat output, and are dispatched using a least-cost of fuel strategy. Wind system simulations include varying air density, wind shear and wake effects. Time step duration is user-selectable. UW-HYBRID 1.0 runs in Windows{reg_sign}, with TRNSED providing a customizable user interface. 12 refs., 6 figs.
Numerical Simulation of a Tornado Generating Supercell
Proctor, Fred H.; Ahmad, Nashat N.; LimonDuparcmeur, Fanny M.
2012-01-01
The development of tornadoes from a tornado generating supercell is investigated with a large eddy simulation weather model. Numerical simulations are initialized with a sounding representing the environment of a tornado producing supercell that affected North Carolina and Virginia during the Spring of 2011. The structure of the simulated storm was very similar to that of a classic supercell, and compared favorably to the storm that affected the vicinity of Raleigh, North Carolina. The presence of mid-level moisture was found to be important in determining whether a supercell would generate tornadoes. The simulations generated multiple tornadoes, including cyclonic-anticyclonic pairs. The structure and the evolution of these tornadoes are examined during their lifecycle.
Numerical simulation of centrifugal casting of pipes
Kaschnitz, E.
2012-07-01
A numerical simulation model for the horizontal centrifugal pipe casting process was developed with the commercial simulation package Flow3D. It considers - additionally to mass, energy and momentum conservation equations and free surface tracking - the fast radial and slower horizontal movement of the mold. The iron inflow is not steady state but time dependent. Of special importance is the friction between the liquid and the mold in connection with the viscosity and turbulence of the iron. Experiments with the mold at controlled revolution speeds were carried out using a high-speed camera. From these experiments friction coefficients for the description of the interaction between mold and melt were obtained. With the simulation model, the influence of typical process parameters (e.g. melts inflow, mold movement, melt temperature, cooling media) on the wall thickness of the pipes can be studied. The comparison to results of pipes from production shows a good agreement between simulation and reality.
Issues in Numerical Simulation of Fire Suppression
Energy Technology Data Exchange (ETDEWEB)
Tieszen, S.R.; Lopez, A.R.
1999-04-12
This paper outlines general physical and computational issues associated with performing numerical simulation of fire suppression. Fire suppression encompasses a broad range of chemistry and physics over a large range of time and length scales. The authors discuss the dominant physical/chemical processes important to fire suppression that must be captured by a fire suppression model to be of engineering usefulness. First-principles solutions are not possible due to computational limitations, even with the new generation of tera-flop computers. A basic strategy combining computational fluid dynamics (CFD) simulation techniques with sub-grid model approximations for processes that have length scales unresolvable by gridding is presented.
Numerical simulation of semisolid continuous casting process
Institute of Scientific and Technical Information of China (English)
无
2001-01-01
A general mathematical model and boundary condition applicable to momentum and heat transfer in the semisolid continuous casting(SCC) process was established. Using the model, the numerical simulation of the momentum and heat transfer of molten metal was carried out in the SCC system. The obtained results fit well with the measured ones. Moreover, using the numerical simulating software, the effect of various factors on breakout and breakage was explored. The obtained results show that heat flow density of copper mold and the withdrawal beginning time are two major influencing factors. The larger the heat flow density of copper mold, or the shorter the withdrawal beginning time, the more stable the semisolid continuous casting process.
Numerical simulations of catastrophic disruption: Recent results
Benz, W.; Asphaug, E.; Ryan, E. V.
1994-01-01
Numerical simulations have been used to study high velocity two-body impacts. In this paper, a two-dimensional Largrangian finite difference hydro-code and a three-dimensional smooth particle hydro-code (SPH) are described and initial results reported. These codes can be, and have been, used to make specific predictions about particular objects in our solar system. But more significantly, they allow us to explore a broad range of collisional events. Certain parameters (size, time) can be studied only over a very restricted range within the laboratory; other parameters (initial spin, low gravity, exotic structure or composition) are difficult to study at all experimentally. The outcomes of numerical simulations lead to a more general and accurate understanding of impacts in their many forms.
First Numerical Simulations of Anomalous Hydrodynamics
Hongo, Masaru; Hirano, Tetsufumi
2013-01-01
Anomalous hydrodynamics is a low-energy effective theory that captures effects of quantum anomalies. We develop a numerical code of anomalous hydrodynamics and apply it to dynamics of heavy-ion collisions, where anomalous transports are expected to occur. This is the first attempt to perform fully non-linear numerical simulations of anomalous hydrodynamics. We discuss implications of the simulations for possible experimental observations of anomalous transport effects. From analyses of the charge-dependent elliptic flow parameters ($v_2^\\pm$) as a function of the net charge asymmetry $A_\\pm$, we quantitatively verify that the linear dependence of $\\Delta v_2 \\equiv v_2^- - v_2^+$ on the net charge asymmetry $A_\\pm$ cannot be regarded as a sensitive signal of anomalous transports, contrary to previous studies. We, however, find that the intercept $\\Delta v_2(A_\\pm=0)$ is sensitive to anomalous transport effects.
Numerical simulation and nasal air-conditioning
Directory of Open Access Journals (Sweden)
Keck, Tilman
2010-01-01
Full Text Available Heating and humidification of the respiratory air are the main functions of the nasal airways in addition to cleansing and olfaction. Optimal nasal air conditioning is mandatory for an ideal pulmonary gas exchange in order to avoid desiccation and adhesion of the alveolar capillary bed. The complex three-dimensional anatomical structure of the nose makes it impossible to perform detailed in vivo studies on intranasal heating and humidification within the entire nasal airways applying various technical set-ups. The main problem of in vivo temperature and humidity measurements is a poor spatial and time resolution. Therefore, in vivo measurements are feasible only to a restricted extent, solely providing single temperature values as the complete nose is not entirely accessible. Therefore, data on the overall performance of the nose are only based on one single measurement within each nasal segment. In vivo measurements within the entire nose are not feasible. These serious technical issues concerning in vivo measurements led to a large number of numerical simulation projects in the last few years providing novel information about the complex functions of the nasal airways. In general, numerical simulations merely calculate predictions in a computational model, e.g. a realistic nose model, depending on the setting of the boundary conditions. Therefore, numerical simulations achieve only approximations of a possible real situation. The aim of this review is the synopsis of the technical expertise on the field of in vivo nasal air conditioning, the novel information of numerical simulations and the current state of knowledge on the influence of nasal and sinus surgery on nasal air conditioning.
Numerical simulation of axial flow compressors.
Jesuino Takachi Tomita
2002-01-01
This work deals with the numerical simulation of axial flow compressors, from design to performance prediction. The stage performance prediction uses the meanline flow properties. Stage-stacking is used to analyse a multi-stage compressor. A computer program, written in FORTRAN, was developed and is able to design an axial flow compressor given air mass flow, total pressure ratio, overall efficiency and design speed. All geometrical data relevant to the compressor performance prediction is ca...
Numerical Simulation on CCOS Controllable Variable
Institute of Scientific and Technical Information of China (English)
CHENG Hao-bo; FENG Zhi-jing
2003-01-01
On the basis of Preston hypothesis,the motion relationship between tool and workpiece upon the tool's motion in planar model is analyzed.The effect on computer controlled optical surfacing (CCOS) caused by controllable variable is simulated except for the dwelling time,thus,some reference on theory is provided to optimize the former numerical control (NC) model,and fast manufacturing of large departure aspherics is realized.
Efficient Numerical Inversion for Financial Simulations
Derflinger, Gerhard; Hörmann, Wolfgang; Leydold, Josef; Sak, Halis
2009-01-01
Generating samples from generalized hyperbolic distributions and non-central chi-square distributions by inversion has become an important task for the simulation of recent models in finance in the framework of (quasi-) Monte Carlo. However, their distribution functions are quite expensive to evaluate and thus numerical methods like root finding algorithms are extremely slow. In this paper we demonstrate how our new method based on Newton interpolation and Gauss-Lobatto quadrature can be util...
2001 Numerical Propulsion System Simulation Review
Lytle, John; Follen, Gregory; Naiman, Cynthia; Veres, Joseph; Owen, Karl; Lopez, Isaac
2002-01-01
The technologies necessary to enable detailed numerical simulations of complete propulsion systems are being developed at the NASA Glenn Research Center in cooperation with industry, academia and other government agencies. Large scale, detailed simulations will be of great value to the nation because they eliminate some of the costly testing required to develop and certify advanced propulsion systems. In addition, time and cost savings will be achieved by enabling design details to be evaluated early in the development process before a commitment is made to a specific design. This concept is called the Numerical Propulsion System Simulation (NPSS). NPSS consists of three main elements: (1) engineering models that enable multidisciplinary analysis of large subsystems and systems at various levels of detail, (2) a simulation environment that maximizes designer productivity, and (3) a cost-effective, high-performance computing platform. A fundamental requirement of the concept is that the simulations must be capable of overnight execution on easily accessible computing platforms. This will greatly facilitate the use of large-scale simulations in a design environment. This paper describes the current status of the NPSS with specific emphasis on the progress made over the past year on air breathing propulsion applications. Major accomplishments include the first formal release of the NPSS object-oriented architecture (NPSS Version 1) and the demonstration of a one order of magnitude reduction in computing cost-to-performance ratio using a cluster of personal computers. The paper also describes the future NPSS milestones, which include the simulation of space transportation propulsion systems in response to increased emphasis on safe, low cost access to space within NASA's Aerospace Technology Enterprise. In addition, the paper contains a summary of the feedback received from industry partners on the fiscal year 2000 effort and the actions taken over the past year to
2000 Numerical Propulsion System Simulation Review
Lytle, John; Follen, Greg; Naiman, Cynthia; Veres, Joseph; Owen, Karl; Lopez, Isaac
2001-01-01
The technologies necessary to enable detailed numerical simulations of complete propulsion systems are being developed at the NASA Glenn Research Center in cooperation with industry, academia, and other government agencies. Large scale, detailed simulations will be of great value to the nation because they eliminate some of the costly testing required to develop and certify advanced propulsion systems. In addition, time and cost savings will be achieved by enabling design details to be evaluated early in the development process before a commitment is made to a specific design. This concept is called the Numerical Propulsion System Simulation (NPSS). NPSS consists of three main elements: (1) engineering models that enable multidisciplinary analysis of large subsystems and systems at various levels of detail, (2) a simulation environment that maximizes designer productivity, and (3) a cost-effective. high-performance computing platform. A fundamental requirement of the concept is that the simulations must be capable of overnight execution on easily accessible computing platforms. This will greatly facilitate the use of large-scale simulations in a design environment. This paper describes the current status of the NPSS with specific emphasis on the progress made over the past year on air breathing propulsion applications. Major accomplishments include the first formal release of the NPSS object-oriented architecture (NPSS Version 1) and the demonstration of a one order of magnitude reduction in computing cost-to-performance ratio using a cluster of personal computers. The paper also describes the future NPSS milestones, which include the simulation of space transportation propulsion systems in response to increased emphasis on safe, low cost access to space within NASA'S Aerospace Technology Enterprise. In addition, the paper contains a summary of the feedback received from industry partners on the fiscal year 1999 effort and the actions taken over the past year to
A Hybrid Flight Control for a Simulated Raptor-30 V2 Helicopter
Directory of Open Access Journals (Sweden)
Arbab Nighat Khizer
2015-04-01
Full Text Available This paper presents a hybrid flight control system for a single rotor simulated Raptor-30 V2 helicopter. Hybrid intelligent control system, combination of the conventional and intelligent control methodologies, is applied to small model helicopter. The proposed hybrid control used PID as a traditional control and fuzzy as an intelligent control so as to take the maximum advantage of advanced control theory. The helicopter?s model used; comes from X-Plane flight simulator and their hybrid flight control system was simulated using MATLAB/SIMULINK in a simulation platform. X-Plane is also used to visualize the performance of this proposed autopilot design. Through a series of numerous experiments, the operation of hybrid control system was investigated. Results verified that the proposed hybrid control has an excellent performance at hovering flight mode.
NUMERICAL MODEL APPLICATION IN ROWING SIMULATOR DESIGN
Directory of Open Access Journals (Sweden)
Petr Chmátal
2016-04-01
Full Text Available The aim of the research was to carry out a hydraulic design of rowing/sculling and paddling simulator. Nowadays there are two main approaches in the simulator design. The first one includes a static water with no artificial movement and counts on specially cut oars to provide the same resistance in the water. The second approach, on the other hand uses pumps or similar devices to force the water to circulate but both of the designs share many problems. Such problems are affecting already built facilities and can be summarized as unrealistic feeling, unwanted turbulent flow and bad velocity profile. Therefore, the goal was to design a new rowing simulator that would provide nature-like conditions for the racers and provide an unmatched experience. In order to accomplish this challenge, it was decided to use in-depth numerical modeling to solve the hydraulic problems. The general measures for the design were taken in accordance with space availability of the simulator ́s housing. The entire research was coordinated with other stages of the construction using BIM. The detailed geometry was designed using a numerical model in Ansys Fluent and parametric auto-optimization tools which led to minimum negative hydraulic phenomena and decreased investment and operational costs due to the decreased hydraulic losses in the system.
Numerical simulation of a natural circulation loop
Energy Technology Data Exchange (ETDEWEB)
Verissimo, Gabriel L.; Moreira, Maria de Lourdes; Faccini, Jose Luiz H., E-mail: gabrielverissimo@poli.ufrj.b, E-mail: malu@ien.gov.b, E-mail: faccini@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)
2011-07-01
This work presents a numerical simulation of a natural circulation loop using computational fluid dynamics. The simulated loop is an experimental model in a reduced scale of 1:10 of a passive heat removal system typical of advanced PWR reactors. The loop is composed of a heating vessel containing 52 electric heaters, a vertical shell-tube heat exchanger and a column of expansion. The working fluid is distilled water. Initially it was created a tridimensional geometric model of the loop components. After that, it was generated a tridimensional mesh of finite elements in order to calculate the variables of the problem. The boundaries of the numerical simulation were the power of the electric resistances and the cooling flow in the secondary side of the heat exchanger. The initial conditions were the temperature, the pressure and the fluid velocity at the time just before the power has been switched on. The results of this simulation were compared with the experimental data, in terms of the evolution of the temperatures in different locations of the loop, and of the average natural circulation flow as a function of time for a given power. (author)
Mathematical models and numerical simulation in electromagnetism
Bermúdez, Alfredo; Salgado, Pilar
2014-01-01
The book represents a basic support for a master course in electromagnetism oriented to numerical simulation. The main goal of the book is that the reader knows the boundary-value problems of partial differential equations that should be solved in order to perform computer simulation of electromagnetic processes. Moreover it includes a part devoted to electric circuit theory based on ordinary differential equations. The book is mainly oriented to electric engineering applications, going from the general to the specific, namely, from the full Maxwell’s equations to the particular cases of electrostatics, direct current, magnetostatics and eddy currents models. Apart from standard exercises related to analytical calculus, the book includes some others oriented to real-life applications solved with MaxFEM free simulation software.
Numerical recipes for mold filling simulation
Energy Technology Data Exchange (ETDEWEB)
Kothe, D.; Juric, D.; Lam, K.; Lally, B.
1998-07-01
Has the ability to simulate the filling of a mold progressed to a point where an appropriate numerical recipe achieves the desired results? If results are defined to be topological robustness, computational efficiency, quantitative accuracy, and predictability, all within a computational domain that faithfully represents complex three-dimensional foundry molds, then the answer unfortunately remains no. Significant interfacial flow algorithm developments have occurred over the last decade, however, that could bring this answer closer to maybe. These developments have been both evolutionary and revolutionary, will continue to transpire for the near future. Might they become useful numerical recipes for mold filling simulations? Quite possibly. Recent progress in algorithms for interface kinematics and dynamics, linear solution methods, computer science issues such as parallelization and object-oriented programming, high resolution Navier-Stokes (NS) solution methods, and unstructured mesh techniques, must all be pursued as possible paths toward higher fidelity mold filling simulations. A detailed exposition of these algorithmic developments is beyond the scope of this paper, hence the authors choose to focus here exclusively on algorithms for interface kinematics. These interface tracking algorithms are designed to model the movement of interfaces relative to a reference frame such as a fixed mesh. Current interface tracking algorithm choices are numerous, so is any one best suited for mold filling simulation? Although a clear winner is not (yet) apparent, pros and cons are given in the following brief, critical review. Highlighted are those outstanding interface tracking algorithm issues the authors feel can hamper the reliable modeling of today`s foundry mold filling processes.
A Numerical Simulation of the Density Oscilator
Hernandez Zapata, Sergio; Lopez Sanchez, Erick Javier; Ruiz Chavarria, Gerardo
2016-11-01
In this work we carry out a numerical simulation for the dynamics that originates when a fluid (salty water) is located on top of another less dense fluid (pure water) in the presence of gravity. This is an unstable situation that leads to the development of intercalating lines of descending salty water and ascending pure water. Another situation is studied where the fluids are in two containers joined by a small hole. In this case a time pattern of alternating flows develops leading to an oscillator. The study of the velocity field around the hole shows than in a certain interval of time it develops intercalating lines like in the former situation. An interesting result is the fact that when a given fluid is flowing in one direction a vorticity pattern develops in the other fluid. The Navier-Stokes, continuity and salt diffusion equations, are solved numerically in cylindrical coordinates, using a finite difference scheme in the axial and radial directions and a Fourier spectral method for the angular coordinate. On the other hand, the second order Adams-Bashfort method is used for the time evolution. The results are compared to a numerical simulation of a pedestrian oscillator we developed based on the Hebling and Molnar social force model. The authors want to acknowledge support by DGAPA-UNAM (Project PAPIIT IN-115315 "Ondas y estructuras coherentes en dinámica de fluidos".
Three dimensional direct numerical simulation of complex jet flows
Shin, Seungwon; Kahouadji, Lyes; Juric, Damir; Chergui, Jalel; Craster, Richard; Matar, Omar
2016-11-01
We present three-dimensional simulations of two types of very challenging jet flow configurations. The first consists of a liquid jet surrounded by a faster coaxial air flow and the second consists of a global rotational motion. These computations require a high spatial resolution and are performed with a newly developed high performance parallel code, called BLUE, for the simulation of two-phase, multi-physics and multi-scale incompressible flows, tested on up to 131072 threads with excellent scalability performance. The method for the treatment of the fluid interfaces uses a hybrid Front Tracking/Level Set technique that defines the interface both by a discontinuous density field as well as by a local triangular Lagrangian mesh. Coriolis forces are taken into account and solved via an exact time-integration method that ensures numerical accuracy and stability. EPSRC UK Programme Grant EP/K003976/1.
Numerical simulation of real-world flows
Hayase, Toshiyuki
2015-10-01
Obtaining real flow information is important in various fields, but is a difficult issue because measurement data are usually limited in time and space, and computational results usually do not represent the exact state of real flows. Problems inherent in the realization of numerical simulation of real-world flows include the difficulty in representing exact initial and boundary conditions and the difficulty in representing unstable flow characteristics. This article reviews studies dealing with these problems. First, an overview of basic flow measurement methodologies and measurement data interpolation/approximation techniques is presented. Then, studies on methods of integrating numerical simulation and measurement, namely, four-dimensional variational data assimilation (4D-Var), Kalman filters (KFs), state observers, etc are discussed. The first problem is properly solved by these integration methodologies. The second problem can be partially solved with 4D-Var in which only initial and boundary conditions are control parameters. If an appropriate control parameter capable of modifying the dynamical structure of the model is included in the formulation of 4D-Var, unstable modes are properly suppressed and the second problem is solved. The state observer and KFs also solve the second problem by modifying mathematical models to stabilize the unstable modes of the original dynamical system by applying feedback signals. These integration methodologies are now applied in simulation of real-world flows in a wide variety of research fields. Examples are presented for basic fluid dynamics and applications in meteorology, aerospace, medicine, etc.
Numerical simulation of real-world flows
Energy Technology Data Exchange (ETDEWEB)
Hayase, Toshiyuki, E-mail: hayase@ifs.tohoku.ac.jp [Institute of Fluid Science, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, 980-8577 (Japan)
2015-10-15
Obtaining real flow information is important in various fields, but is a difficult issue because measurement data are usually limited in time and space, and computational results usually do not represent the exact state of real flows. Problems inherent in the realization of numerical simulation of real-world flows include the difficulty in representing exact initial and boundary conditions and the difficulty in representing unstable flow characteristics. This article reviews studies dealing with these problems. First, an overview of basic flow measurement methodologies and measurement data interpolation/approximation techniques is presented. Then, studies on methods of integrating numerical simulation and measurement, namely, four-dimensional variational data assimilation (4D-Var), Kalman filters (KFs), state observers, etc are discussed. The first problem is properly solved by these integration methodologies. The second problem can be partially solved with 4D-Var in which only initial and boundary conditions are control parameters. If an appropriate control parameter capable of modifying the dynamical structure of the model is included in the formulation of 4D-Var, unstable modes are properly suppressed and the second problem is solved. The state observer and KFs also solve the second problem by modifying mathematical models to stabilize the unstable modes of the original dynamical system by applying feedback signals. These integration methodologies are now applied in simulation of real-world flows in a wide variety of research fields. Examples are presented for basic fluid dynamics and applications in meteorology, aerospace, medicine, etc. (topical review)
Multistage Hybrid Arabic/Indian Numeral OCR System
Alginaih, Yasser M
2010-01-01
The use of OCR in postal services is not yet universal and there are still many countries that process mail sorting manually. Automated Arabic/Indian numeral Optical Character Recognition (OCR) systems for Postal services are being used in some countries, but still there are errors during the mail sorting process, thus causing a reduction in efficiency. The need to investigate fast and efficient recognition algorithms/systems is important so as to correctly read the postal codes from mail addresses and to eliminate any errors during the mail sorting stage. The objective of this study is to recognize printed numerical postal codes from mail addresses. The proposed system is a multistage hybrid system which consists of three different feature extraction methods, i.e., binary, zoning, and fuzzy features, and three different classifiers, i.e., Hamming Nets, Euclidean Distance, and Fuzzy Neural Network Classifiers. The proposed system, systematically compares the performance of each of these methods, and ensures t...
Numerical simulations of vibrating sessile drop
Kahouadji, Lyes; Chergui, Jalel; Juric, Damir; Shin, Seungwon; Craster, Richard; Matar, Omar
2016-11-01
A vibrated drop constitutes a very rich physical system, blending both interfacial and volume phenomena. A remarkable experimental study was performed by M. Costalonga highlighting sessile drop motion subject to horizontal, vertical and oblique vibration. Several intriguing phenomena are observed such as drop walking and rapid droplet ejection. We perform three-dimensional direct numerical simulations of vibrating sessile drops where the phenomena described above are computed using the massively parallel multiphase code BLUE. EPSRC UK Programme Grant MEMPHIS (EP/K003976/1).
Tornado structure interaction: a numerical simulation
Energy Technology Data Exchange (ETDEWEB)
Wilson, T.
1977-05-20
The effects of tornadoes on buildings are examined to determine the wind forces on structures. The American National Standards Institute (ANSI) has developed guidelines for building code requirements for the minimum wind loads a building must be designed to withstand. The conservatism or nonconservatism on the ANSI approach is evaluated by simulating tornado-structure interaction numerically with a two-dimensional fluid dynamics computer code and a vortex model. Only external pressures are considered. The computer calculations yield the following percentages of the ANSI design pressures: rigid frame, 50 to 90%; individual wall panels, 75 to 200%; and wall corners, 50 to 75%.
Institute of Scientific and Technical Information of China (English)
高新强; 沈俊; 和晓楠; 唐成春; 戴巍; 李珂; 公茂琼; 吴剑峰
2015-01-01
Magnetic refrigeration is a cooling method based on the magnetocaloric effect, which uses solid magnetocaloric materials as refrigerant, and helium, water or other fluid as heat transfer fluids. Stirling refrigeration is a kind of mature gas regenerative cooling method, using helium gas as the refrigerant. These refrigerations have similar cycling charac-teristics, and are both safe, environmantal-friendly and high eﬃcient cooling methods. Therefore, a hybrid magnetic refrigerator combined with Stirling gas refrigeration effect is proposed and designed. In our previous works for hybrid magnetic refrigeration, numerical simulation and experimental performance of the low-pressure hybrid magnetic refrig-erator was carried out, and the cycling mechanism of hybrid magnetic refrigeration was also figured out. In this study, a numerical model for the high-pressure hybrid magnetic refrigeration cycle is established. The magnetic refrigeration materials are utilized as the regenerator matrix for both gas Stirling and active magnetic regenerative refrigeration in this model. Effects of gas Stirling and active magnetic regenerative refrigeration are combined to build a kind of high eﬃcient refrigeration cycle. Ansys Fluent software is applied in this paper. Based on the physical model of hybrid refrig-erator and the theories of magnetocaloric effect and numerical calculation of regenerator, computational fluid dynamics (CFD) model of high-pressure hybrid magnetic refrigerator is established. This paper describes the internal heat transfer mechanism of Stirling and magnetic refrigeration effect in an active regenerator. Some parameters of the model such as working frequency and utilization are analyzed and the best phase angle is figured out in order to couple these two cooling effects positively. Simulation results show that Stirling and magnetic cooling effects can be coupled positively at phase angle of 60◦. Results also show that with increasing system pressure
Numerical considerations in simulating the global magnetosphere
Directory of Open Access Journals (Sweden)
A. J. Ridley
2010-08-01
Full Text Available Magnetohydrodynamic (MHD models of the global magnetosphere are very good research tools for investigating the topology and dynamics of the near-Earth space environment. While these models have obvious limitations in regions that are not well described by the MHD equations, they can typically be used (or are used to investigate the majority of magnetosphere. Often, a secondary consideration is overlooked by researchers when utilizing global models – the effects of solving the MHD equations on a grid, instead of analytically. Any discretization unavoidably introduces numerical artifacts that affect the solution to various degrees. This paper investigates some of the consequences of the numerical schemes and grids that are used to solve the MHD equations in the global magnetosphere. Specifically, the University of Michigan's MHD code is used to investigate the role of grid resolution, numerical schemes, limiters, inner magnetospheric density boundary conditions, and the artificial lowering of the speed of light on the strength of the ionospheric cross polar cap potential and the build up of the ring current in the inner magnetosphere. It is concluded that even with a very good solver and the highest affordable grid resolution, the inner magnetosphere is not grid converged. Artificially reducing the speed of light reduces the numerical diffusion that helps to achieve better agreement with data. It is further concluded that many numerical effects work nonlinearly to complicate the interpretation of the physics within the magnetosphere, and so simulation results should be scrutinized very carefully before a physical interpretation of the results is made. Our conclusions are not limited to the Michigan MHD code, but apply to all MHD models due to the limitations of computational resources.
Chandekar, Gautam S; Kelkar, Ajit D
2014-01-01
In the present study experimental and numerical investigations were carried out to predict the low velocity impact response of four symmetric configurations: 10 ply E Glass, 10 ply AS4 Carbon, and two Hybrid combinations with 1 and 2 outer plies of E Glass and 8 and 6 inner plies of Carbon. All numerical investigations were performed using commercial finite element software, LS-DYNA. The test coupons were manufactured using the low cost Heated Vacuum Assisted Resin Transfer Molding (H-VARTM©) technique. Low velocity impact testing was carried out using an Instron Dynatup 8250 impact testing machine. Standard 6 × 6 Boeing fixture was used for all impact experiments. Impact experiments were performed over progressive damage, that is, from incipient damage till complete failure of the laminate in six successive impact energy levels for each configuration. The simulation results for the impact loading were compared with the experimental results. For both nonhybrid configurations, it was observed that the simulated results were in good agreement with the experimental results, whereas, for hybrid configurations, the simulated impact response was softer than the experimental response. Maximum impact load carrying capacity was also compared for all four configurations based on their areal density. It was observed that Hybrid262 configuration has superior impact load to areal density ratio.
Directory of Open Access Journals (Sweden)
Gautam S. Chandekar
2014-01-01
Full Text Available In the present study experimental and numerical investigations were carried out to predict the low velocity impact response of four symmetric configurations: 10 ply E Glass, 10 ply AS4 Carbon, and two Hybrid combinations with 1 and 2 outer plies of E Glass and 8 and 6 inner plies of Carbon. All numerical investigations were performed using commercial finite element software, LS-DYNA. The test coupons were manufactured using the low cost Heated Vacuum Assisted Resin Transfer Molding (H-VARTM© technique. Low velocity impact testing was carried out using an Instron Dynatup 8250 impact testing machine. Standard 6 × 6 Boeing fixture was used for all impact experiments. Impact experiments were performed over progressive damage, that is, from incipient damage till complete failure of the laminate in six successive impact energy levels for each configuration. The simulation results for the impact loading were compared with the experimental results. For both nonhybrid configurations, it was observed that the simulated results were in good agreement with the experimental results, whereas, for hybrid configurations, the simulated impact response was softer than the experimental response. Maximum impact load carrying capacity was also compared for all four configurations based on their areal density. It was observed that Hybrid262 configuration has superior impact load to areal density ratio.
Chandekar, Gautam S.; Kelkar, Ajit D.
2014-01-01
In the present study experimental and numerical investigations were carried out to predict the low velocity impact response of four symmetric configurations: 10 ply E Glass, 10 ply AS4 Carbon, and two Hybrid combinations with 1 and 2 outer plies of E Glass and 8 and 6 inner plies of Carbon. All numerical investigations were performed using commercial finite element software, LS-DYNA. The test coupons were manufactured using the low cost Heated Vacuum Assisted Resin Transfer Molding (H-VARTM©) technique. Low velocity impact testing was carried out using an Instron Dynatup 8250 impact testing machine. Standard 6 × 6 Boeing fixture was used for all impact experiments. Impact experiments were performed over progressive damage, that is, from incipient damage till complete failure of the laminate in six successive impact energy levels for each configuration. The simulation results for the impact loading were compared with the experimental results. For both nonhybrid configurations, it was observed that the simulated results were in good agreement with the experimental results, whereas, for hybrid configurations, the simulated impact response was softer than the experimental response. Maximum impact load carrying capacity was also compared for all four configurations based on their areal density. It was observed that Hybrid262 configuration has superior impact load to areal density ratio. PMID:24719573
Numerical Simulation of Level Magnetic Field
Institute of Scientific and Technical Information of China (English)
无
2003-01-01
According to Maxwell electromagnetic field theory and magnetic vector potential integral equation, a mathematical model of LMF (Level Magnetic Field) for EMBR (Electromagnetic brake) was proposed, and the reliable software for LMF calculation was developed. The distribution of magnetic flux density given by numerical simulation shows that the magnetic flux density is greater in the magnet and magnetic leakage is observed in the gap. The magnetic flux density is uniform in horizontal plane and a peak is observed in vertical plane. Furthermore, the effects of electromagnetic and structural parameters on magnetic flux density were discussed. The relationship between magnetic flux, electromagnetic parameters and structural parameters is obtained by dimensional analysis, simulation experiment and least square method.
Numerical simulation of large fabric filter
Directory of Open Access Journals (Sweden)
Kovařík Petr
2012-04-01
Full Text Available Fabric filters are used in the wide range of industrial technologies for cleaning of incoming or exhaust gases. To achieve maximal efficiency of the discrete phase separation and long lifetime of the filter hoses, it is necessary to ensure uniform load on filter surface and to avoid impacts of heavy particles with high velocities to the filter hoses. The paper deals with numerical simulation of two phase flow field in a large fabric filter. The filter is composed of six chambers with approx. 1600 filter hoses in total. The model was simplified to one half of the filter, the filter hoses walls were substituted by porous zones. The model settings were based on experimental data, especially on the filter pressure drop. Unsteady simulations with different turbulence models were done. Flow field together with particles trajectories were analyzed. The results were compared with experimental observations.
Numerical simulation of large fabric filter
Sedláček, Jan; Kovařík, Petr
2012-04-01
Fabric filters are used in the wide range of industrial technologies for cleaning of incoming or exhaust gases. To achieve maximal efficiency of the discrete phase separation and long lifetime of the filter hoses, it is necessary to ensure uniform load on filter surface and to avoid impacts of heavy particles with high velocities to the filter hoses. The paper deals with numerical simulation of two phase flow field in a large fabric filter. The filter is composed of six chambers with approx. 1600 filter hoses in total. The model was simplified to one half of the filter, the filter hoses walls were substituted by porous zones. The model settings were based on experimental data, especially on the filter pressure drop. Unsteady simulations with different turbulence models were done. Flow field together with particles trajectories were analyzed. The results were compared with experimental observations.
Numerical simulation of space UV spectrographs
Yushkin, Maksim; Fatkhullin, Timur; Panchuk, Vladimir; Sachkov, Mikhail; Kanev, Evgeny
2016-07-01
Based on the ray tracing method, we developed algorithms for constructing numerical model of spectroscopic instrumentation. The Software is realized in C ++ using nVidia CUDA technology. The software package consists of three separate modules: the ray tracing module, a module for calculating energy efficiency and module of CCD image simulation. The main objective of this work was to obtain images of the spectra for the cross-dispersed spectrographs as well as segmented aperture Long Slit Spectrograph. The software can be potentially used by WSO-UV project. To test our algorithms and the software package we have performed simulations of the ground cross-dispersed Nasmyth Echelle Spectrometer (NES) installed on the platform of the Nasmyth focus of the Russian 6-meter BTA telescope. The comparison of model images of stellar spectra with observations on this device confirms that the software works well. The high degree of agreement between the theoretical and real spectra is shown.
Numerical Simulation on Ship Bubbly Wake
Institute of Scientific and Technical Information of China (English)
Huiping Fu; Pengcheng Wan
2011-01-01
Based on a volume of fluid two-phase model imbedded in the general computational fluid dynamics code FLUENT6.3.26,the viscous flow with free surface around a model-scaled KRISO container ship(KCS)was first numerically simulated.Then with a rigid-lid-free-surface method,the underwater flow field was computed based on the mixture multiphase model to simulate the bubbly wake around the KCS hull.The realizable k-ε two-equation turbulence model and Reynolds stress model were used to analyze the effects of turbulence model on the ship bubbly wake.The air entrainment model,which is relative to the normal velocity gradient of the free surface,and the solving method were verified by the qualitatively reasonable computed results.
Numerical simulation of flow through orifice meters
Barry, J. J.; Sheikholeslami, M. Z.; Patel, B. R.
1992-05-01
The FLUENT and FLUENT/BFC computer programs have been used to numerically model turbulent flow through orifice meters. These simulations were based on solution of the Navier-Stokes equations incorporating a k-epsilon turbulence model. For ideal installations, trends in the discharge coefficient with Reynolds number, beta ratio, and surface roughness have been reproduced, and the value of the discharge coefficient has been computed to within 2 percent. Nonideal installations have also been simulated, including the effects of expanders, reducers, valves, and bends. Detailed modeling of flow through a bend has yielded results in good agreement with experimental data. The trend in discharge coefficient shifts for orifice meters downstream of bends has been predicted reasonably well.
Study of numerical errors in direct numerical simulation and large eddy simulation
Institute of Scientific and Technical Information of China (English)
YANG Xiao-long; FU Song
2008-01-01
By comparing the energy spectrum and total kinetic energy, the effects of numerical errors (which arise from aliasing and discretization errors), subgrid-scale (SGS) models, and their interactions on direct numerical simulation (DNS) and large eddy simulation (LES) are investigated. The decaying isotropic turbulence is chosen as the test case. To simulate complex geometries, both the spectral method and Pade compact difference schemes are studied. The truncated Navier-Stokes (TNS) equation model with Pade discrete filter is adopted as the SGS model. It is found that the discretization error plays a key role in DNS. Low order difference schemes may be unsuitable. However, for LES, it is found that the SGS model can represent the effect of small scales to large scales and dump the numerical errors. Therefore, reasonable results can also be obtained with a low order discretization scheme.
Large-scale nanocomposites simulations using hybrid particle/SCFT simulations
Sides, Scott
2009-03-01
Preliminary results from 2D simulations of block copolymer nanocomposites (Phys. Rev. Lett. Vol 96, 250601 (2006) have been performed using a hybrid self-consistent field theory (SCFT) algorithm. While these simulation results showed that the presence of nanoparticles could induce changes in block copolymer morphologies, quantitative agreement with experiments for the particle densities at this transition are not yet possible. A feature missing in the 2D hybrid simulations is the packing behavior of real, three-dimensional spherical particles embedded in lamellar layers or hexagonally packed cylinders formed by linear diblock chains. In order to carry out these hybrid particle/SCFT 3D simulations a new object-oriented SCFT framework has been developed. The object-oriented design enables the hybrid/SCFT simulations to be performed in a framework that is both numerically efficient and sufficiently flexible to incorporate new SCFT models easily, In particular, this new framework will be used to investigate the distribution of particle positions in diblock lamellar layers as function of nanoparticle density to study the interplay of patterning due to diblock domain structure and the chain depletion interaction between spherical particles.
Numerical Simulation of a Centrifugal Compressor
Directory of Open Access Journals (Sweden)
S.M.Swamy
2017-06-01
Full Text Available In this paper, the tip clearance effects on flow field of a low speed centrifugal compressor without and with partial shroud (PS fitted on to the rotor blade tip at three values of tip clearance, viz. = 2.2%, 5.1% and 7.9% of rotor blade height at the exit at three flow coefficients, namely, = 0.18, 0.28, and 0.34, was studied. Based on the theory of computational fluid dynamics (CFD, performance curves and parameter distributions of the compressor were obtained from the 3-D numerical simulation by using ANSYS CFX 15.0. The centrifugal compressor in aerodynamic requirement is that edge velocities along the impeller channel passage surfaces like hub, shroud, pressure and suction surfaces vary smoothly without sudden decelerations, which cause flow separation leading to losses. Using the periodic boundaries and defined flow conditions at inflow / exit flow and blade rotations, the turbulent viscous flow between blade channels are computed. The efficiency related parameters using average quantities, besides flow pattern in terms of velocities, streamlines and pressure distribution on blade surfaces are graphically interpreted. An attempt is also made to study the influence of pressure loads on structural deformations in the chosen blade profile. This paper highlights aero-mechanical features of centrifugal impeller obtained from several numerical simulations, which are expected to provide a sound basis for further investigations
Direct numerical simulation of dynamo transition for nonhelical MHD
Energy Technology Data Exchange (ETDEWEB)
Nath, Dinesh; Verma, Mahendra K [Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208016 (India); Lessinnes, Thomas; Carati, Daniele [Physique Statistique et Plasmas, Universite Libre de Bruxellers, B-1050 Bruxelles (Belgium); Sarris, Ioannis [Department of Mechanical and Industrial Engineering, University of Thessaly, Volos (Greece)
2010-02-01
Pseudospectral Direct Numerical Simulation (DNS) has been performed to simulate dynamo transition for nonhelical magnetohydrodynamics turbulence. The numerical results are compared with a recent low-dimensional model [Verma et al. [13
Utilization of MATLAB in Simulation of Linear Hybrid Circuits
Directory of Open Access Journals (Sweden)
L. Brancik
2003-12-01
Full Text Available In the paper a MATLAB-based method for simulating transientphenomena in linear hybrid circuits containing parts with both lumpedand distributed parameters is presented. Distributed parts of thecircuit are multiconductor transmission lines, which can generally benonuniform, with frequency-dependent parameters, and under nonzeroinitial voltage and/or current distributions. In principle a solutionis formulated using the modified nodal analysis method in the frequencydomain. Subsequently an improved fast method of the numerical inversionof Laplace transforms in the vector or matrix form is applied to obtainsolution in the time domain.
Direct numerical simulation of turbulent reacting flows
Energy Technology Data Exchange (ETDEWEB)
Chen, J.H. [Sandia National Laboratories, Livermore, CA (United States)
1993-12-01
The development of turbulent combustion models that reflect some of the most important characteristics of turbulent reacting flows requires knowledge about the behavior of key quantities in well defined combustion regimes. In turbulent flames, the coupling between the turbulence and the chemistry is so strong in certain regimes that is is very difficult to isolate the role played by one individual phenomenon. Direct numerical simulation (DNS) is an extremely useful tool to study in detail the turbulence-chemistry interactions in certain well defined regimes. Globally, non-premixed flames are controlled by two limiting cases: the fast chemistry limit, where the turbulent fluctuations. In between these two limits, finite-rate chemical effects are important and the turbulence interacts strongly with the chemical processes. This regime is important because industrial burners operate in regimes in which, locally the flame undergoes extinction, or is at least in some nonequilibrium condition. Furthermore, these nonequilibrium conditions strongly influence the production of pollutants. To quantify the finite-rate chemistry effect, direct numerical simulations are performed to study the interaction between an initially laminar non-premixed flame and a three-dimensional field of homogeneous isotropic decaying turbulence. Emphasis is placed on the dynamics of extinction and on transient effects on the fine scale mixing process. Differential molecular diffusion among species is also examined with this approach, both for nonreacting and reacting situations. To address the problem of large-scale mixing and to examine the effects of mean shear, efforts are underway to perform large eddy simulations of round three-dimensional jets.
Hybrid Computational Simulation and Study of Terahertz Pulsed Photoconductive Antennas
Emadi, R.; Barani, N.; Safian, R.; Nezhad, A. Zeidaabadi
2016-08-01
A photoconductive antenna (PCA) has been numerically investigated in the terahertz (THz) frequency band based on a hybrid simulation method. This hybrid method utilizes an optoelectronic solver, Silvaco TCAD, and a full-wave electromagnetic solver, CST. The optoelectronic solver is used to find the accurate THz photocurrent by considering realistic material parameters. Performance of photoconductive antennas and temporal behavior of the excited photocurrent for various active region geometries such as bare-gap electrode, interdigitated electrodes, and tip-to-tip rectangular electrodes are investigated. Moreover, investigations have been done on the center of the laser illumination on the substrate, substrate carrier lifetime, and diffusion photocurrent associated with the carriers temperature, to achieve efficient and accurate photocurrent. Finally, using the full-wave electromagnetic solver and the calculated photocurrent obtained from the optoelectronic solver, electromagnetic radiation of the antenna and its associated detected THz signal are calculated and compared with a measurement reference for verification.
Hybrid Computational Simulation and Study of Terahertz Pulsed Photoconductive Antennas
Emadi, R.; Barani, N.; Safian, R.; Nezhad, A. Zeidaabadi
2016-11-01
A photoconductive antenna (PCA) has been numerically investigated in the terahertz (THz) frequency band based on a hybrid simulation method. This hybrid method utilizes an optoelectronic solver, Silvaco TCAD, and a full-wave electromagnetic solver, CST. The optoelectronic solver is used to find the accurate THz photocurrent by considering realistic material parameters. Performance of photoconductive antennas and temporal behavior of the excited photocurrent for various active region geometries such as bare-gap electrode, interdigitated electrodes, and tip-to-tip rectangular electrodes are investigated. Moreover, investigations have been done on the center of the laser illumination on the substrate, substrate carrier lifetime, and diffusion photocurrent associated with the carriers temperature, to achieve efficient and accurate photocurrent. Finally, using the full-wave electromagnetic solver and the calculated photocurrent obtained from the optoelectronic solver, electromagnetic radiation of the antenna and its associated detected THz signal are calculated and compared with a measurement reference for verification.
Direct numerical simulation of human phonation
Saurabh, Shakti; Bodony, Daniel
2016-11-01
A direct numerical simulation study of the generation and propagation of the human voice in a full-body domain is conducted. A fully compressible fluid flow model, anatomically representative vocal tract geometry, finite deformation model for vocal fold (VF) motion and a fully coupled fluid-structure interaction model are employed. The dynamics of the multi-layered VF tissue with varying stiffness are solved using a quadratic finite element code. The fluid-solid domains are coupled through a boundary-fitted interface and utilize a Poisson equation-based mesh deformation method. A new inflow boundary condition, based upon a quasi-1D formulation with constant sub-glottal volume velocity, linked to the VF movement, has been adopted. Simulations for both child and adult phonation were performed. Acoustic characteristics obtained from these simulation are consistent with expected values. A sensitivity analysis based on VF stiffness variation is undertaken and sound pressure level/fundamental frequency trends are established. An evaluation of the data against the commonly-used quasi-1D equations suggest that the latter are not sufficient to model phonation. Phonation threshold pressures are measured for several VF stiffness variations and comparisons to clinical data are carried out. Supported by the National Science Foundation (CAREER Award Number 1150439).
The Numerical Propulsion System Simulation: An Overview
Lytle, John K.
2000-01-01
Advances in computational technology and in physics-based modeling are making large-scale, detailed simulations of complex systems possible within the design environment. For example, the integration of computing, communications, and aerodynamics has reduced the time required to analyze major propulsion system components from days and weeks to minutes and hours. This breakthrough has enabled the detailed simulation of major propulsion system components to become a routine part of designing systems, providing the designer with critical information about the components early in the design process. This paper describes the development of the numerical propulsion system simulation (NPSS), a modular and extensible framework for the integration of multicomponent and multidisciplinary analysis tools using geographically distributed resources such as computing platforms, data bases, and people. The analysis is currently focused on large-scale modeling of complete aircraft engines. This will provide the product developer with a "virtual wind tunnel" that will reduce the number of hardware builds and tests required during the development of advanced aerospace propulsion systems.
Suitability of post-Newtonian/numerical-relativity hybrid waveforms for gravitational wave detectors
Energy Technology Data Exchange (ETDEWEB)
MacDonald, Ilana; Nissanke, Samaya; Pfeiffer, Harald P, E-mail: macdonald@astro.utoronto.ca [Canadian Institute for Theoretical Astrophysics, University of Toronto, Toronto, Ontario M5S 3H8 (Canada)
2011-07-07
This paper presents a study of the sufficient accuracy of post-Newtonian and numerical relativity waveforms for the most demanding usage case: parameter estimation of strong sources in advanced gravitational wave detectors. For black hole binaries, these detectors require accurate waveform models which can be constructed by fusing an analytical post-Newtonian inspiral waveform with a numerical relativity merger-ringdown waveform. We perform a comprehensive analysis of errors that enter such 'hybrid waveforms'. We find that the post-Newtonian waveform must be aligned with the numerical relativity waveform to exquisite accuracy, about 1/100 of a gravitational wave cycle. Phase errors in the inspiral phase of the numerical relativity simulation must be controlled to {approx}< 0.1 rad. (These numbers apply to moderately optimistic estimates about the number of GW sources; exceptionally strong signals require even smaller errors.) The dominant source of error arises from the inaccuracy of the investigated post-Newtonian Taylor approximants. Using our error criterion, even at 3.5th post-Newtonian order, hybridization has to be performed significantly before the start of the longest currently available numerical waveforms which cover 30 gravitational wave cycles. The current investigation is limited to the equal-mass, zero-spin case and does not take into account calibration errors of the gravitational wave detectors.
Numerical Propulsion System Simulation: An Overview
Lytle, John K.
2000-01-01
The cost of implementing new technology in aerospace propulsion systems is becoming prohibitively expensive and time consuming. One of the main contributors to the high cost and lengthy time is the need to perform many large-scale hardware tests and the inability to integrate all appropriate subsystems early in the design process. The NASA Glenn Research Center is developing the technologies required to enable simulations of full aerospace propulsion systems in sufficient detail to resolve critical design issues early in the design process before hardware is built. This concept, called the Numerical Propulsion System Simulation (NPSS), is focused on the integration of multiple disciplines such as aerodynamics, structures and heat transfer with computing and communication technologies to capture complex physical processes in a timely and cost-effective manner. The vision for NPSS, as illustrated, is to be a "numerical test cell" that enables full engine simulation overnight on cost-effective computing platforms. There are several key elements within NPSS that are required to achieve this capability: 1) clear data interfaces through the development and/or use of data exchange standards, 2) modular and flexible program construction through the use of object-oriented programming, 3) integrated multiple fidelity analysis (zooming) techniques that capture the appropriate physics at the appropriate fidelity for the engine systems, 4) multidisciplinary coupling techniques and finally 5) high performance parallel and distributed computing. The current state of development in these five area focuses on air breathing gas turbine engines and is reported in this paper. However, many of the technologies are generic and can be readily applied to rocket based systems and combined cycles currently being considered for low-cost access-to-space applications. Recent accomplishments include: (1) the development of an industry-standard engine cycle analysis program and plug 'n play
Numerical simulations of black-hole spacetimes
Chu, Tony
This thesis covers various aspects of the numerical simulation of black-hole spacetimes according to Einstein's general theory of relativity, using the Spectral Einstein Code developed by the Caltech-Cornell-CITA collaboration. The first topic is improvement of binary-black-hole initial data. One such issue is the construction of binary-black-hole initial data with nearly extremal spins that remain nearly constant during the initial relaxation in an evolution. Another concern is the inclusion of physically realistic tidal deformations of the black holes to reduce the high-frequency components of the spurious gravitational radiation content, and represents a first step in incorporating post-Newtonian results in constraint-satisfying initial data. The next topic is the evolution of black-hole binaries and the gravitational waves they emit. The first spectral simulation of two inspiralling black holes through merger and ringdown is presented, in which the black holes are nonspinning and have equal masses. This work is extended to perform the first spectral simulations of two inspiralling black holes with moderate spins and equal masses, including the merger and ringdown. Two configurations are considered, in which both spins are either anti-aligned or aligned with the orbital angular momentum. Highly accurate gravitational waveforms are computed for all these cases, and are used to calibrate waveforms in the effective-one-body model. The final topic is the behavior of quasilocal black-hole horizons in highly dynamical situations. Simulations of a rotating black hole that is distort ed by a pulse of ingoing gravitational radiation are performed. Multiple marginally outer trapped surfaces are seen to appear and annihilate with each other during the evolution, and the world tubes th ey trace out are all dynamical horizons. The dynamical horizon and angular momentum flux laws are evaluated in this context, and the dynamical horizons are contrasted with the event horizon
Numerical Simulation of DC Coronal Heating
Dahlburg, Russell B.; Einaudi, G.; Taylor, Brian D.; Ugarte-Urra, Ignacio; Warren, Harry; Rappazzo, A. F.; Velli, Marco
2016-05-01
Recent research on observational signatures of turbulent heating of a coronal loop will be discussed. The evolution of the loop is is studied by means of numerical simulations of the fully compressible three-dimensional magnetohydrodynamic equations using the HYPERION code. HYPERION calculates the full energy cycle involving footpoint convection, magnetic reconnection, nonlinear thermal conduction and optically thin radiation. The footpoints of the loop magnetic field are convected by random photospheric motions. As a consequence the magnetic field in the loop is energized and develops turbulent nonlinear dynamics characterized by the continuous formation and dissipation of field-aligned current sheets: energy is deposited at small scales where heating occurs. Dissipation is non-uniformly distributed so that only a fraction of thecoronal mass and volume gets heated at any time. Temperature and density are highly structured at scales which, in the solar corona, remain observationally unresolved: the plasma of the simulated loop is multi thermal, where highly dynamical hotter and cooler plasma strands are scattered throughout the loop at sub-observational scales. Typical simulated coronal loops are 50000 km length and have axial magnetic field intensities ranging from 0.01 to 0.04 Tesla. To connect these simulations to observations the computed number densities and temperatures are used to synthesize the intensities expected in emission lines typically observed with the Extreme ultraviolet Imaging Spectrometer (EIS) on Hinode. These intensities are then employed to compute differential emission measure distributions, which are found to be very similar to those derived from observations of solar active regions.
Numerical simulations of coupled problems in engineering
2014-01-01
This book presents and discusses mathematical models, numerical methods and computational techniques used for solving coupled problems in science and engineering. It takes a step forward in the formulation and solution of real-life problems with a multidisciplinary vision, accounting for all of the complex couplings involved in the physical description. Simulation of multifaceted physics problems is a common task in applied research and industry. Often a suitable solver is built by connecting together several single-aspect solvers into a network. In this book, research in various fields was selected for consideration: adaptive methodology for multi-physics solvers, multi-physics phenomena and coupled-field solutions, leading to computationally intensive structural analysis. The strategies which are used to keep these problems computationally affordable are of special interest, and make this an essential book.
Numerical Simulation of Solitary Kinetic Alfven Waves
Institute of Scientific and Technical Information of China (English)
DING Jian; LI Yi; WANG Shui
2008-01-01
Using the two-fluid model in the case of α1 (α=β/2Q, β is the ratio of thermal pressure to magnetic pressure, and Q=m,e/m,I), we numerically investigate the interactions between two solitary kinetic Alfven waves (SKAWs) and between an SKAW and a density discontinuity. The results show that the two SKAWs would remain in their original shapes and propagate at their initiating speeds, which indicates that SKAWs behave just like standard solitons. The simulation also shows that SKAWs will reflect and refract when crossing a discontinuity and propagating into a higher density region. The transmission wave is an SKAW with increasing density, and the reverberation is a disturbance with lower amplitude.
Direct numerical simulation of compressible isotropic turbulence
Institute of Scientific and Technical Information of China (English)
LI; Xinliang(李新亮); FU; Dexun(傅德薰); MAYanwen(马延文)
2002-01-01
Direct numerical simulation (DNS) of decaying compressible isotropic turbulence at tur-bulence Mach numbers of Mt = 0.2-0.7 and Taylor Reynolds numbers of 72 and 153 is per-formed by using the 7th order upwind-biased difference and 8th order center difference schemes.Results show that proper upwind-biased difference schemes can release the limit of "start-up"problem to Mach numbers.Compressibility effects on the statistics of turbulent flow as well as the mechanics of shockletsin compressible turbulence are also studied, and the conclusion is drawn that high Mach numberleads to more dissipation. Scaling laws in compressible turbulence are also analyzed. Evidence isobtained that scaling laws and extended self similarity (ESS) hold in the compressible turbulentflow in spite of the presence of shocklets, and compressibility has little effect on scaling exponents.
Direct numerical simulation of axisymmetric turbulence
Qu, Bo; Bos, Wouter J. T.; Naso, Aurore
2017-09-01
The dynamics of decaying, strictly axisymmetric, incompressible turbulence is investigated using direct numerical simulations. It is found that the angular momentum is a robust invariant of the system. It is further shown that long-lived coherent structures are generated by the flow. These structures can be associated with stationary solutions of the Euler equations. The structures obey relations in agreement with predictions from selective decay principles, compatible with the decay laws of the system. Two different types of decay scenarios are highlighted. The first case results in a quasi-two-dimensional flow with a dynamical behavior in the poloidal plane similar to freely decaying two-dimensional turbulence. In a second regime, the long-time dynamics is dominated by a single three-dimensional mode.
Numerical simulation of facet dendrite growth
Institute of Scientific and Technical Information of China (English)
CHEN Zhi; CHEN Chang-le; HAO Li-mei
2008-01-01
Numerical simulation based on phase field method was performed to describe the solidification of silicon. The effect of anisotropy, undercooling and coupling parameter on dendrite growth shape was investigated. It is indicated that the entire facet dendrite shapes are obtained by using regularized phase field model. Steady state tip velocity of dendrite drives to a fixed value when γ≤0.13. With further increasing the anisotropy value, steady state tip velocity decreases and the size is smaller. With the increase in the undercooling and coupling parameter, crystal grows from facet to facet dendrite. In addition, with increasing coupling parameter, the facet part of facet dendrite decreases gradually, which is in good agreement with Wulff theory.
Collisionless microinstabilities in stellarators II - numerical simulations
Proll, Josefine Henriette Elise; Helander, Per
2013-01-01
Microinstabilities exhibit a rich variety of behavior in stellarators due to the many degrees of freedom in the magnetic geometry. It has recently been found that certain stellarators (quasi-isodynamic ones with maximum-$J$ geometry) are partly resilient to trapped-particle instabilities, because fast-bouncing particles tend to extract energy from these modes near marginal stability. In reality, stellarators are never perfectly quasi-isodynamic, and the question thus arises whether they still benefit from enhanced stability. Here the stability properties of Wendelstein 7-X and a more quasi-isodynamic configuration, QIPC, are investigated numerically and compared with the National Compact Stellarator Experiment (NCSX) and the DIII-D tokamak. In gyrokinetic simulations, performed with the gyrokinetic code GENE in the electrostatic and collisionless approximation, ion-temperature-gradient modes, trapped-electron modes and mixed-type instabilities are studied. Wendelstein 7-X and QIPC exhibit significantly reduce...
Developing integrated patient pathways using hybrid simulation
Zulkepli, Jafri; Eldabi, Tillal
2016-10-01
Integrated patient pathways includes several departments, i.e. healthcare which includes emergency care and inpatient ward; intermediate care which patient(s) will stay for a maximum of two weeks and at the same time be assessed by assessment team to find the most suitable care; and social care. The reason behind introducing the intermediate care in western countries was to reduce the rate of patients that stays in the hospital especially for elderly patients. This type of care setting has been considered to be set up in some other countries including Malaysia. Therefore, to assess the advantages of introducing this type of integrated healthcare setting, we suggest develop the model using simulation technique. We argue that single simulation technique is not viable enough to represent this type of patient pathways. Therefore, we suggest develop this model using hybrid techniques, i.e. System Dynamics (SD) and Discrete Event Simulation (DES). Based on hybrid model result, we argued that the result is viable to be as references for decision making process.
Numerical simulation of turbulent slurry flows
Haghgoo, Mohammad Reza; Spiteri, Reymond J.; Bergstrom, Donlad J.
2016-11-01
Slurry flows, i.e., the flow of an agglomeration of liquid and particles, are widely employed in many industrial applications, such as hydro-transport systems, pharmaceutical batch crystallizers, and wastewater disposal. Although there are numerous studies available in the literature on turbulent gas-particle flows, the hydrodynamics of turbulent liquid-particle flows has received much less attention. In particular, the fluid-phase turbulence modulation due to the particle fluctuating motion is not yet well understood and remains challenging to model. This study reports the results of a numerical simulation of a vertically oriented slurry pipe flow using a two-fluid model based on the kinetic theory of granular flows. The particle stress model also includes the effects of frictional contact. Different turbulence modulation models are considered, and their capability to capture the characteristic features of the turbulent flow is assessed. The model predictions are validated against published experimental data and demonstrate the significant effect of the particles on the fluid-phase turbulence.
Numerical simulations of dissipationless disk accretion
Bogovalov, S. V.; Tronin, I. V.
2017-09-01
Our goal is to study the regime of disk accretion in which almost all of the angular momentum and energy is carried away by the wind outflowing from the disk in numerical experiments. For this type of accretion the kinetic energy flux in the outflowing wind can exceed considerably the bolometric luminosity of the accretion disk, what is observed in the plasma flow from galactic nuclei in a number of cases. In this paper we consider the nonrelativistic case of an outflow from a cold Keplerian disk. All of the conclusions derived previously for such a system in the self-similar approximation are shown to be correct. The numerical results agree well with the analytical predictions. The inclination angle of the magnetic field lines in the disk is less than 60°, which ensures a free wind outflow from the disk, while the energy flux per wind particle is greater than the particle rotation energy in its Keplerian orbit by several orders of magnitude, provided that the ratio r A/ r ≫ 1, where r A is the Alfvénic radius and r is the radius of the Keplerian orbit. In this case, the particle kinetic energy reaches half the maximum possible energy in the simulation region. The magnetic field collimates the outflowing wind near the rotation axis and decollimates appreciably the wind outflowing from the outer disk periphery.
Numerical simulation of installation of skirt foundations
Energy Technology Data Exchange (ETDEWEB)
Vangelsten, Bjoern Vidar
1997-12-31
Skirt foundation has been increasingly used for permanent offshore oil installations and anchors for drilling ships. Suction is commonly used in skirt foundation installing. If a large amount of suction is applied, the soil around the foundation may fail and the foundation become useless. This thesis studies failure due to high seepage gradients, aiming to provide a basis for reducing the risk of such failures. Skirt penetration model testing has shown that to solve the problem one must understand what is going on at the skirt tip during suction installation. A numerical model based on micro mechanics was developed as continuum hypothesis was seen to be unsuitable to describe the processes in the critical phases of the failure. The numerical model combines two-dimensional elliptical particles with the finite difference method for flow to model water flow in a granular material. The key idea is to formulate the permeability as a function of the porosity of the grain assembly and so obtain an interaction between the finite difference method on flow and the particle movement. A computer program, DYNELL, was developed and used to simulate: (1) weight penetration of a skirt wall, (2) combined suction and weight penetration of a skirt wall, and (3) critical gradient tests around a skirt wall to study failure mechanisms. The model calculations agree well with laboratory experiments. 16 refs., 124 figs., 21 tabs.
Numerical simulation of detonation failure in nitromethane
Energy Technology Data Exchange (ETDEWEB)
Kipp, M E; Nunziato, J W
1981-01-01
Detonation failure in the homogeneous liquid explosive nitromethane has been observed experimentally in a wide variety of confining geometries. However, numerical simulation of these failure situations with a wave propagation code has been essentially non-existent due to the large differences between the critical diameter and the length of the reaction zone - characteristic dimensions which differ by about two orders of magnitude. This inability to spatially resolve both the reaction zone and geometries of significant size has led us to propose a new numerical technique, based on the stability criterion for rate-type material models, in which only temporal resolution of the reaction zone is required. Using an improved model for nitromethane, we have carried out a series of two-dimensional calculations which illustrate the utility of the present approach in predicting a wide range of experimental observations. Of particular computational significance is the removal of the difficulty requiring spatial resolution of the reaction zone, so that problems of practical size can be analyzed with existing computer capabilities.
Direct Numerical Simulation of Automobile Cavity Tones
Kurbatskii, Konstantin; Tam, Christopher K. W.
2000-01-01
The Navier Stokes equation is solved computationally by the Dispersion-Relation-Preserving (DRP) scheme for the flow and acoustic fields associated with a laminar boundary layer flow over an automobile door cavity. In this work, the flow Reynolds number is restricted to R(sub delta*) < 3400; the range of Reynolds number for which laminar flow may be maintained. This investigation focuses on two aspects of the problem, namely, the effect of boundary layer thickness on the cavity tone frequency and intensity and the effect of the size of the computation domain on the accuracy of the numerical simulation. It is found that the tone frequency decreases with an increase in boundary layer thickness. When the boundary layer is thicker than a certain critical value, depending on the flow speed, no tone is emitted by the cavity. Computationally, solutions of aeroacoustics problems are known to be sensitive to the size of the computation domain. Numerical experiments indicate that the use of a small domain could result in normal mode type acoustic oscillations in the entire computation domain leading to an increase in tone frequency and intensity. When the computation domain is expanded so that the boundaries are at least one wavelength away from the noise source, the computed tone frequency and intensity are found to be computation domain size independent.
Numerical simulation of friction stir welding
Directory of Open Access Journals (Sweden)
Mijajlović Miroslav
2014-01-01
Full Text Available Friction stir welding is a solid-state welding technique that utilizes thermo-mechanical influence of the rotating welding tool on parent material resulting with monolith joint-weld. On the contact of welding tool and parent material, significant stirring and deformation of parent material appears, and during this process mechanical energy is partially transformed into heat. The paper describes the software for the numerical simulation of friction stir welding developed at Mechanical Engineering Faculty, University of Nis. Numerical solution for estimation of welding plates temperature is estimated using finite difference method-explicit scheme with adaptive grid, considering influence of temperature on material's conductivity, contact conditions between welding tool and parent material, material flow around welding tool etc. The calculated results are in good agreement with the experimental results. [Projekat Ministarstva nauke Republike Srbije, br. TR35034: The research of modern non-conventional technologies application in manufacturing companies with the aim of increase efficiency of use, product quality, reduce of costs and save energy and materials
Hybrid Simulations of Particle Acceleration at Shocks
Caprioli, Damiano
2014-01-01
We present the results of large hybrid (kinetic ions - fluid electrons) simulations of particle acceleration at non-relativistic collisionless shocks. Ion acceleration efficiency and magnetic field amplification are investigated in detail as a function of shock inclination and strength, and compared with predictions of diffusive shock acceleration theory, for shocks with Mach number up to 100. Moreover, we discuss the relative importance of resonant and Bell's instability in the shock precursor, and show that diffusion in the self-generated turbulence can be effectively parametrized as Bohm diffusion in the amplified magnetic field.
Cluster hybrid Monte Carlo simulation algorithms
Plascak, J. A.; Ferrenberg, Alan M.; Landau, D. P.
2002-06-01
We show that addition of Metropolis single spin flips to the Wolff cluster-flipping Monte Carlo procedure leads to a dramatic increase in performance for the spin-1/2 Ising model. We also show that adding Wolff cluster flipping to the Metropolis or heat bath algorithms in systems where just cluster flipping is not immediately obvious (such as the spin-3/2 Ising model) can substantially reduce the statistical errors of the simulations. A further advantage of these methods is that systematic errors introduced by the use of imperfect random-number generation may be largely healed by hybridizing single spin flips with cluster flipping.
Numerical simulation of tungsten alloy in powder injection molding process
Institute of Scientific and Technical Information of China (English)
ZHENG Zhen-xing; XIA Wei; ZHOU Zhao-yao; ZHU Quan-li
2008-01-01
The flow behavior of feedstock for the tungsten alloy powder in the mold cavity was approximately described using Hele-Shaw flow model. The math model consisting of momentum equation, consecutive equation and thermo-conduction equation for describing the injection process was established. The equations are solved by the finite element/finite difference hybrid method that means dispersing the feedstock model with finite element method, resolving the model along the depth with finite difference methpd, and tracking the movable boundary with control volume method, then the pressure equation and energy equation can be resolved in turn. The numerical simulation of the injection process and the identification of the process parameters were realized by the Moldflow software. The results indicate that there is low temperature gradient in the cavity while the pressure and shear rate gradient are high at high flow rate. The selection of the flow rate is affected by the structure of the gate. The shear rate and the pressure near the gate can be decreased by properly widening the dimension of the gate. There is a good agreement between the process parameters obtained by the numerical simulation and the actual ones.
Numerical simulation of tulip flame dynamics
Energy Technology Data Exchange (ETDEWEB)
Cloutman, L.D.
1991-11-30
A finite difference reactive flow hydrodynamics program based on the full Navier-Stokes equations was used to simulate the combustion process in a homogeneous-charge, constant-volume combustion bomb in which an oddly shaped flame, known as a ``tulip flame`` in the literature, occurred. The ``tulip flame`` was readily reproduced in the numerical simulations, producing good agreement with the experimental flame shapes and positions at various times. The calculations provide sufficient detail about the dynamics of the experiment to provide some insight into the physical mechanisms responsible for the peculiar flame shape. Several factors seem to contribute to the tulip formation. The most important process is the baroclinic production of vorticity by the flame front, and this rate of production appears to be dramatically increased by the nonaxial flow generated when the initial semicircular flame front burns out along the sides of the chamber. The vorticity produces a pair of vortices behind the flame that advects the flame into the tulip shape. Boundary layer effects contribute to the details of the flame shape next to the walls of the chamber, but are otherwise not important. 24 refs.
Numerical simulation of tulip flame dynamics
Energy Technology Data Exchange (ETDEWEB)
Cloutman, L.D.
1991-11-30
A finite difference reactive flow hydrodynamics program based on the full Navier-Stokes equations was used to simulate the combustion process in a homogeneous-charge, constant-volume combustion bomb in which an oddly shaped flame, known as a tulip flame'' in the literature, occurred. The tulip flame'' was readily reproduced in the numerical simulations, producing good agreement with the experimental flame shapes and positions at various times. The calculations provide sufficient detail about the dynamics of the experiment to provide some insight into the physical mechanisms responsible for the peculiar flame shape. Several factors seem to contribute to the tulip formation. The most important process is the baroclinic production of vorticity by the flame front, and this rate of production appears to be dramatically increased by the nonaxial flow generated when the initial semicircular flame front burns out along the sides of the chamber. The vorticity produces a pair of vortices behind the flame that advects the flame into the tulip shape. Boundary layer effects contribute to the details of the flame shape next to the walls of the chamber, but are otherwise not important. 24 refs.
Numerical simulations of capillary barrier field tests
Energy Technology Data Exchange (ETDEWEB)
Morris, C.E. [Univ. of Wollongong (Australia); Stormont, J.C. [Univ. of New Mexico, Albuquerque, NM (United States)
1997-12-31
Numerical simulations of two capillary barrier systems tested in the field were conducted to determine if an unsaturated flow model could accurately represent the observed results. The field data was collected from two 7-m long, 1.2-m thick capillary barriers built on a 10% grade that were being tested to investigate their ability to laterally divert water downslope. One system had a homogeneous fine layer, while the fine soil of the second barrier was layered to increase its ability to laterally divert infiltrating moisture. The barriers were subjected first to constant infiltration while minimizing evaporative losses and then were exposed to ambient conditions. The continuous infiltration period of the field tests for the two barrier systems was modelled to determine the ability of an existing code to accurately represent capillary barrier behavior embodied in these two designs. Differences between the field test and the model data were found, but in general the simulations appeared to adequately reproduce the response of the test systems. Accounting for moisture retention hysteresis in the layered system will potentially lead to more accurate modelling results and is likely to be important when developing reasonable predictions of capillary barrier behavior.
Numerical simulation for nuclear pumped laser
Energy Technology Data Exchange (ETDEWEB)
Sakasai, Kaoru [Japan Atomic Energy Research Inst., Tokyo (Japan)
1998-07-01
To apply nuclear pumped laser of {sup 3}He-Ne-Ar gas to detect neutron, the optimum gas mixture was investigated by numerical simulation. When {sup 3}He-Ne-Ar mixture gas are irradiated by neutron, proton and triton with high velocity are produced by {sup 3}He(np)T and two charge particles ionized {sup 3}He, Ne and Ar which reacted each other and attained to 3p`(1/2){sub 0}-3S`(1/2). The calculation method is constructed by defining the rate equations of each ion and exited atom and the electron energy balance equation and by time integrating the simultaneous differential equations of the above two equations and the law of conservation of charge. Penning ionization and energy transport by elastic collision of neutral atom were considered in the transport process of electron energy direct ionization by secondary charge particle. Calculation time was 1 msec. The optimum component was shown 3 atm He, 24 Torr He and 8 Torr Ar by simulation. Laser oscilation was generated under the conditions 3.3 x 10{sup 14} (N/cm{sup 2}/5) thermal neutron flux at 50 cm laser cell length and 99% coefficient of reflection of mirror. After laser oscilation, laser output was proportional to neutron flux. These results showed nuclear pumped laser of {sup 3}He-Ne-Ar was able to detect optically neutron. (S.Y)
Numerical simulation of Richtmyer-Meshkov instability
Institute of Scientific and Technical Information of China (English)
FU Dexun; MA Yanwen; ZHANG Linbo; TIAN Baolin
2004-01-01
The compressible Navier-Stokes equations discretized with a fourth order accurate compact finite difference scheme with group velocity control are used to simulate the Richtmyer-Meshkov (R-M) instability problem produced by cylindrical shock-cylindrical material interface with shock Mach number Ms=1.2 and density ratio 1:20 (interior density/outer density). Effect of shock refraction, reflection, interaction of the reflected shock with the material interface, and effect of initial perturbation modes on R-M instability are investigated numerically. It is noted that the shock refraction is a main physical mechanism of the initial phase changing of the material surface. The multiple interactions of the reflected shock from the origin with the interface and the R-M instability near the material interface are the reason for formation of the spike-bubble structures. Different viscosities lead to different spike-bubble structure characteristics. The vortex pairing phenomenon is found in the initial double mode simulation. The mode interaction is the main factor of small structures production near the interface.
Numerical Simulations of Disk-Planet Interactions
D'Angelo, Gennaro
2003-06-01
The aim of this thesis is the study the dynamical interactions occurring between a forming planet and its surrounding protostellar environment. This task is accomplished by means of both 2D and 3D numerical simulations. The first part of this work concerned global simulations in 3D. These were intended to investigate large-scale effects caused by a Jupiter-size body still in the process of accreting matter from its surroundings. Simulations show that, despite a density gap forms along the orbital path, Jupiter-mass protoplanets still accrete at a rate on the order of 0.01 Earth's masses per year when they are embedded in a minimum-mass Solar nebula. In the same conditions, the migration time scale due to gravitational torques by the disk is around 100000 years. The second part of the work was dedicated to perform 2D calculations, by employing a nested-grid technique. This method allows to carry out global simulations of planets orbiting in disks and, at the same time, to resolve in great detail the dynamics of the flow inside the Roche lobe of both massive and low-mass planets. Regardless of the planet mass, the high resolution supplied by the nested-grid technique permits an evaluation of the torques, resulting from short and very short range gravitational interactions, more reliable than the one previously estimated with the aid of numerical methods. Likewise, the mass flow onto the planet is computed in a more accurate fashion. Resulting migration time scales are in the range from 20000 years, for intermediate-mass planets, to 1000000 years, for very low-mass as well as high-mass planets. Circumplanetary disks form inside of the Roche lobe of Jupiter-size secondaries. In order to evaluate the consequences of the flat geometry on the local flow structure around planets, 3D nested-grid simulations were carried out to investigate a range of planetary masses spanning from 1.5 Earth's masses to one Jupiter's mass. Outcomes show that migration rates are relatively
Numerical simulation of a semi-indirect evaporative cooler
Energy Technology Data Exchange (ETDEWEB)
Martin, R. Herrero [Departamento de Ingenieria Termica y de Fluidos, Universidad Politecnica de Cartagena, C/Dr. Fleming, s/n (Campus Muralla), 30202 Cartagena, Murcia (Spain)
2009-11-15
This paper presents the experimental study and numerical simulation of a semi-indirect evaporative cooler (SIEC), which acts as an energy recovery device in air conditioning systems. The numerical simulation was conducted by applying the CFD software FLUENT implementing a UDF to model evaporation/condensation. The numerical model was validated by comparing the simulation results with experimental data. Experimental data and numerical results agree for the lower relative humidity series but not for higher relative humidity values. (author)
Advanced numerical simulation of collapsible earth dams
Energy Technology Data Exchange (ETDEWEB)
De Farias, M.M.; Cordao Neto, M.P. [Brasilia Univ., Federal District (Brazil). Dept. of Civil and Environmental Engineering
2010-12-15
This paper discussed a systematic methodology for the hydromechanical coupled numerical analysis of earth dams constructed with unsaturated collapsible soil. Every design stage was considered, including construction, reservoir filling, and advance of saturation front until the steady-state flow condition is attained. A transient analysis of safety factors applicable to 3-dimensional conditions was presented, giving consideration to unsaturated materials and the interrelation between hydraulic and mechanical phenomena by solving equilibrium and continuity conditions at the same time. The finite element method was used to formulate equilibrium and continuity conditions for both soil skeleton and pore water, which necessitated a realistic mechanical model for the stress-strain-suction relation in unsaturated porous material and adequate constitutive models related to water flow and storage, giving special consideration to imposing appropriate boundary conditions for each simulation stage. The methodology was applied to the analysis of earth dams composed of soils at optimum, dry of optimum, and mixed compaction conditions. The dry section simulated dams constructed using poorly compacted, dry material, which are prone to collapse. By strategically placing the optimum materials in the areas of the earth fill that are most stressed, the mixed section could be designed less expensively with the same or better performance as the homogenous section at optimum conditions. The coupled analysis provides a higher safety factor than uncoupled analysis and a realistic picture of end-of-construction pore pressure distribution. The simulation of reservoir filling and saturation front advance permitted clear identification of the initialization, development, and evolution of internal failure mechanisms. 21 refs., 6 tabs., 19 figs.
Hybrid Simulations of Pluto's Plasma Interaction
Feyerabend, M.; Simon, S.; Motschmann, U.; Liuzzo, L.
2016-12-01
We study the interaction between Pluto and the solar wind at the time of the New Horizons (NH) flyby by applying a hybrid (kinetic ions, fluid electrons) simulation model. The use of a hybrid model is necessary since the gyroradii of the involved ion species are more than an order of magnitude larger than the obstacle to the solar wind and thus, Pluto's interaction region displays considerable asymmetries. We investigate the three-dimensional structure and extension of the various plasma signatures seen along the NH trajectory. Especially, we will constrain possible asymmetries in the shape of Pluto's bow shock, plasma tail and Plutopause (i.e., the boundary between the solar wind and the population of plutogenic ions) which may arise from the large ion gyroradii. Starting from the upstream solar wind parameters measured by NH, we investigate the dependency of these plasma signatures on the density of Pluto's ionosphere and on the solar wind ram pressure. We also include Pluto's largest moon Charon into the simulation model and study the simultaneous interaction between both bodies and the solar wind. Data from NH suggest that Charon mainly acts as a plasma absorber without an appreciable atmosphere. For various relative positions of Pluto and Charon, we investigate the deformation of Charon's wake when exposed to the inhomogeneous plasma flow in the Pluto interaction region, as well as a possible feedback of Charon on the structure of Pluto's induced magnetosphere.
Numerical simulation of "An American Haboob"
Directory of Open Access Journals (Sweden)
A. Vukovic
2013-10-01
Full Text Available A dust storm of fearful proportions hit Phoenix in the early evening hours of 5 July 2011. This storm, an American haboob, was predicted hours in advance because numerical, land-atmosphere modeling, computing power and remote sensing of dust events have improved greatly over the past decade. High resolution numerical models are required for accurate simulation of the small-scales of the haboob process, with high velocity surface winds produced by strong convection and severe downbursts. Dust productive areas in this region consist mainly of agricultural fields, with soil surfaces disturbed by plowing and tracks of land in the high Sonoran desert laid barren by ongoing draught. Model simulation of the 5 July 2011 dust storm uses the coupled atmospheric-dust model NMME-DREAM with 3.5 km horizontal resolution. A mask of the potentially dust productive regions is obtained from the land cover and the Normalized Difference Vegetation Index (NDVI data from the Moderate Resolution Imaging Spectroradiometer (MODIS. Model results are compared with radar and other satellite-based images and surface meteorological and PM10 observations. The atmospheric model successfully hindcasted the position of the front in space and time, with about 1 h late arrival in Phoenix. The dust model predicted the rapid uptake of dust and high values of dust concentration in the ensuing storm. South of Phoenix, over the closest source regions (~ 25 km, the model PM10 surface dust concentration reached ~ 2500 μg m−3, but underestimated the values measured by the PM10stations within the city. Model results are also validated by the MODIS aerosol optical depth (AOD, employing deep blue (DB algorithms for aerosol loadings. Model validation included Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO, equipped with the lidar instrument, to disclose the vertical structure of dust aerosols as well as aerosol subtypes. Promising results encourage further
Numerical and experimental studies of the hybrid rocket motor with multi-port fuel grain
Tian, Hui; Li, Xintian; Zeng, Peng; Yu, Nanjia; Cai, Guobiao
2014-03-01
This paper presents three-dimensional numerical simulations and experimental studies of the hybrid rocket motor with multi-port fuel grain. The numerical model is established based on the Navier-Stokes equations with turbulence, chemical reactions, fuel pyrolysis, and solid-gas boundary interactions. The simulation is performed based on the 98% hydrogen peroxide (HP) and hydroxyl terminated polybutadiene (HTPB) propellant combination. The results indicate that the flow field and fuel regression rate distributions present apparent three-dimensional characteristics. The fuel regression rates decrease first and then gradually increase with the axial location increasing. At a certain cross section, the fuel regression rates are lower in the points on arcs with smaller radius of curvature when the fuel port is a derivable convex figure. Two experiments are carried out on a full scale motor with the simulation one. The working process of the motor is steady and no evident oscillatory combustion is observed. The fuel port profiles before and after tests indicate that the fuel regression rate distributions at the cross section match well with the numerical simulation results.
Numerical simulations of unsteady flows in turbomachines
Dorney, Daniel Joseph
The performance of axial and centrifugal turbomachines is significantly affected by the presence of unsteady and viscous flow mechanisms. Most contemporary design systems, however, use steady or linearized unsteady inviscid flow analyses to generate new blade shapes. In an effort to increase the understanding of unsteady viscous flows in turbomachinery blade rows, and to determine the limitations of linearized inviscid flow analyses, a two-part investigation was conducted. In the first portion of this investigation, a nonlinear viscous flow analysis was developed for the prediction of unsteady flows in two dimensional axial turbomachinery blade rows. The boundary conditions were formulated to allow the specification of vortical, entropic and acoustic excitations at the inlet, and acoustic excitations at exit, of a cascade. Numerical simulations were performed for flat plate and compressor exit guide vane cascades, and the predicted results were compared with solutions from classical linearized theory and linearized inviscid flow analysis. The unsteady pressure fields predicted with the current analysis showed close agreement with the linearized solutions for low to moderate temporal frequency vortical and acoustic excitations. As the temporal frequency of the excitations was increased, nonlinear effects caused discrepancies to develop between the linearized and Navier-Stokes solution sets. The inclusion of viscosity had a significant impact on the unsteady vorticity field, but only a minimal effect on the unsteady pressure field. In the second part of this investigation, a quasi-three-dimensional Navier-Stokes analysis was modified and applied to flows in centrifugal turbomachinery blade rows. Inviscid and viscous flow simulations were performed for a centrifugal impeller at three operating conditions. By comparing the predicted and experimental circumferential distributions of the relative frame velocity and flow angle downstream of the impeller, it was
Multiscale Hy3S: Hybrid stochastic simulation for supercomputers
Directory of Open Access Journals (Sweden)
Kaznessis Yiannis N
2006-02-01
Full Text Available Abstract Background Stochastic simulation has become a useful tool to both study natural biological systems and design new synthetic ones. By capturing the intrinsic molecular fluctuations of "small" systems, these simulations produce a more accurate picture of single cell dynamics, including interesting phenomena missed by deterministic methods, such as noise-induced oscillations and transitions between stable states. However, the computational cost of the original stochastic simulation algorithm can be high, motivating the use of hybrid stochastic methods. Hybrid stochastic methods partition the system into multiple subsets and describe each subset as a different representation, such as a jump Markov, Poisson, continuous Markov, or deterministic process. By applying valid approximations and self-consistently merging disparate descriptions, a method can be considerably faster, while retaining accuracy. In this paper, we describe Hy3S, a collection of multiscale simulation programs. Results Building on our previous work on developing novel hybrid stochastic algorithms, we have created the Hy3S software package to enable scientists and engineers to both study and design extremely large well-mixed biological systems with many thousands of reactions and chemical species. We have added adaptive stochastic numerical integrators to permit the robust simulation of dynamically stiff biological systems. In addition, Hy3S has many useful features, including embarrassingly parallelized simulations with MPI; special discrete events, such as transcriptional and translation elongation and cell division; mid-simulation perturbations in both the number of molecules of species and reaction kinetic parameters; combinatorial variation of both initial conditions and kinetic parameters to enable sensitivity analysis; use of NetCDF optimized binary format to quickly read and write large datasets; and a simple graphical user interface, written in Matlab, to help users
Transonic aeroelastic numerical simulation in aeronautical engineering
Energy Technology Data Exchange (ETDEWEB)
Yang, G. [Chinese Academy of Sciences, LHD of the Inst. of Mechanics, Beijing (China)]. E-mail: gwyang@imech.ac.cn
2005-07-01
An LU-SGS (lower-upper symmetric Gauss-Seidel) subiteration scheme is constructed for time-marching of the fluid equations. The HLLEW (Harten-Lax-van Leer-Einfeldt-Wada) scheme is used for the spatial discretization. The same subiteration formulation is applied directly to the structural equations of motion in generalized coordinates. Through subiteration between the fluid and structural equations, a fully implicit aeroelastic solver is obtained for the numerical simulation of fluid/structure interaction. To improve the ability for application to complex configurations, a multiblock grid is used for the flow field calculation and Transfinite Interpolation (TFI) is employed for the adaptive moving grid deformation. The infinite plate spline (IPS) and the principal of virtual work are utilized for the data transformation between the fluid and structure. The developed code was first validated through the comparison of experimental and computational results for the AGARD 445.6 standard aeroelastic wing. Then the flutter character of a tail wing with control surface was analyzed. Finally, flutter boundaries of a complex aircraft configuration were predicted. (author)
Numerical simulation of condensation on structured surfaces.
Fu, Xiaowu; Yao, Zhaohui; Hao, Pengfei
2014-11-25
Condensation of liquid droplets on solid surfaces happens widely in nature and industrial processes. This phase-change phenomenon has great effect on the performance of some microfluidic devices. On the basis of micro- and nanotechnology, superhydrophobic structured surfaces can be well-fabricated. In this work, the nucleating and growth of droplets on different structured surfaces are investigated numerically. The dynamic behavior of droplets during the condensation is simulated by the multiphase lattice Boltzmann method (LBM), which has the ability to incorporate the microscopic interactions, including fluid-fluid interaction and fluid-surface interaction. The results by the LBM show that, besides the chemical properties of surfaces, the topography of structures on solid surfaces influences the condensation process. For superhydrophobic surfaces, the spacing and height of microridges have significant influence on the nucleation sites. This mechanism provides an effective way for prevention of wetting on surfaces in engineering applications. Moreover, it suggests a way to prevent ice formation on surfaces caused by the condensation of subcooled water. For hydrophilic surfaces, however, microstructures may be submerged by the liquid films adhering to the surfaces. In this case, microstructures will fail to control the condensation process. Our research provides an optimized way for designing surfaces for condensation in engineering systems.
Direct Numerical Simulation of Cell Printing
Qiao, Rui; He, Ping
2010-11-01
Structural cell printing, i.e., printing three dimensional (3D) structures of cells held in a tissue matrix, is gaining significant attention in the biomedical community. The key idea is to use desktop printer or similar devices to print cells into 3D patterns with a resolution comparable to the size of mammalian cells, similar to that in living organs. Achieving such a resolution in vitro can lead to breakthroughs in areas such as organ transplantation and understanding of cell-cell interactions in truly 3D spaces. Although the feasibility of cell printing has been demonstrated in the recent years, the printing resolution and cell viability remain to be improved. In this work, we investigate one of the unit operations in cell printing, namely, the impact of a cell-laden droplet into a pool of highly viscous liquids using direct numerical simulations. The dynamics of droplet impact (e.g., crater formation and droplet spreading and penetration) and the evolution of cell shape and internal stress are quantified in details.
Directory of Open Access Journals (Sweden)
Bing He
2015-01-01
Full Text Available Using parallel computation can enhance the performance of numerical simulation of electromagnetic radiation and get great runtime reduction. We simulate the electromagnetic radiation calculation based on the multicore CPU and GPU Parallel Architecture Clusters by using MPI-OpenMP and MPI-CUDA hybrid parallel algorithm. This is an effective solution comparing to the traditional finite-difference time-domain method which has a shortage in the calculation of the electromagnetic radiation on the problem of inadequate large data space and time. What is more, we use regional segmentation, subregional data communications, consolidation, and other methods to improve procedures nested parallelism and finally verify the correctness of the calculation results. Studying these two hybrid models of parallel algorithms run on the high-performance cluster computer, we draw the conclusion that both models are suitable for large-scale numerical calculations, and MPI-CUDA hybrid model can achieve higher speedup.
A Hybrid Numerical Method for Turbulent Mixing Layers. Degree awarded by Case Western Reserve Univ.
Georgiadis, Nicholas J.
2001-01-01
A hybrid method has been developed for simulations of compressible turbulent mixing layers. Such mixing layers dominate the flows in exhaust systems of modern day aircraft and also those of hypersonic vehicles currently under development. The method configurations in which a dominant structural feature provides an unsteady mechanism to drive the turbulent development in the mixing layer. The hybrid method uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall bounded regions entering a mixing section, and a Large Eddy Simulation (LES) procedure to calculate the mixing dominated regions. A numerical technique was developed to enable the use of the hybrid RANS-LES method on stretched, non-Cartesian grids. Closure for the RANS equations was obtained using the Cebeci-Smith algebraic turbulence model in conjunction with the wall-function approach of Ota and Goldberg. The wall-function approach enabled a continuous computational grid from the RANS regions to the LES region. The LES equations were closed using the Smagorinsky subgrid scale model. The hybrid RANS-LES method is applied to a benchmark compressible mixing layer experiment. Preliminary two dimensional calculations are used to investigate the effects of axial grid density and boundary conditions. Vortex shedding from the base region of a splitter plate separating the upstream flows was observed to eventually transition to turbulence. The location of the transition, however, was much further downstream than indicated by experiments. Actual LES calculations, performed in three spatial directions, also indicated vortex shedding, but the transition to turbulence was found to occur much closer to the beginning of the mixing section. which is in agreement with experimental observations. These calculations demonstrated that LES simulations must be performed in three dimensions. Comparisons of time-averaged axial velocities and turbulence intensities indicated reasonable agreement with experimental
Accelerating Climate Simulations Through Hybrid Computing
Zhou, Shujia; Sinno, Scott; Cruz, Carlos; Purcell, Mark
2009-01-01
Unconventional multi-core processors (e.g., IBM Cell B/E and NYIDIDA GPU) have emerged as accelerators in climate simulation. However, climate models typically run on parallel computers with conventional processors (e.g., Intel and AMD) using MPI. Connecting accelerators to this architecture efficiently and easily becomes a critical issue. When using MPI for connection, we identified two challenges: (1) identical MPI implementation is required in both systems, and; (2) existing MPI code must be modified to accommodate the accelerators. In response, we have extended and deployed IBM Dynamic Application Virtualization (DAV) in a hybrid computing prototype system (one blade with two Intel quad-core processors, two IBM QS22 Cell blades, connected with Infiniband), allowing for seamlessly offloading compute-intensive functions to remote, heterogeneous accelerators in a scalable, load-balanced manner. Currently, a climate solar radiation model running with multiple MPI processes has been offloaded to multiple Cell blades with approx.10% network overhead.
NUMERICAL SIMULATION OF BED DEFORMATION IN DIKE BURST
Institute of Scientific and Technical Information of China (English)
无
2001-01-01
The key point in the numerical simulation of breach growth and bed deformation process in a dike burst is the accurate computation of flow and sediment transport. A numerical model for horizontal 2-D non-uniform sediment was developed to simulate the bed deformation process in the dike burst. The first-order scheme was used in computation. Several simulated results were worked out to demonstrate the applicability of the numerical model.
Hybrid simulation: an active power filter case study
Directory of Open Access Journals (Sweden)
Y. A. Garcés
2011-10-01
Full Text Available The hybrid simulation concept consisting of a combination of computer simulation and laboratory tests. This approach is a cost effective alternative to physically testing the whole system and allows better understanding of complex coupled systems.This paper describes implementing an active power filter (APF hybrid prototype where the source system and load are implemented as a real-time simulation and the system of static power converter acting as an active power filter is implemented in physical hardware. It also confirmed the hybrid simulation results by implementing the simulation in MATLAB-Simulink regarding the same system implemented during the active power filter analysis and design stage.
Energy Technology Data Exchange (ETDEWEB)
Lin Jaeyuh [Chang Jung Univ., Tainan (Taiwan, Province of China); Chen Hantaw [National Cheng Kung Univ., Tainan (Taiwan, Province of China). Dept. of Mechanical Engineering
1997-09-01
A hybrid numerical scheme combining the Laplace transform and control-volume methods is presented to solve nonlinear two-dimensional phase-change problems with the irregular geometry. The Laplace transform method is applied to deal with the time domain, and then the control-volume method is used to discretize the transformed system in the space domain. Nonlinear terms induced by the temperature-dependent thermal properties are linearized by using the Taylor series approximation. Control-volume meshes in the solid and liquid regions during simulations are generated by using the discrete transfinite mapping method. The location of the phase-change interface and the isothermal distributions are determined. Comparison of these results with previous results shows that the present numerical scheme has good accuracy for two-dimensional phase-change problems. (orig.). With 10 figs.
Malkov, Ewgenij A.; Poleshkin, Sergey O.; Kudryavtsev, Alexey N.; Shershnev, Anton A.
2016-10-01
The paper presents the software implementation of the Boltzmann equation solver based on the deterministic finite-difference method. The solver allows one to carry out parallel computations of rarefied flows on a hybrid computational cluster with arbitrary number of central processor units (CPU) and graphical processor units (GPU). Employment of GPUs leads to a significant acceleration of the computations, which enables us to simulate two-dimensional flows with high resolution in a reasonable time. The developed numerical code was validated by comparing the obtained solutions with the Direct Simulation Monte Carlo (DSMC) data. For this purpose the supersonic flow past a flat plate at zero angle of attack is used as a test case.
Numerical simulation of turbulent flow in corrugated pipes
Energy Technology Data Exchange (ETDEWEB)
Azevedo, Henrique S. de; Morales, Rigoberto E.M.; Franco, Admilson T.; Junqueira, Silvio L.M.; Erthal, Raul H. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil). Dept. Academico de Mecanica (DAMEC)]. E-mails: rique.stel@gmail.com; rmorales@utfpr.edu.br; admilson@utfpr.edu.br; silvio@utfpr.edu.br; rherthal@utfpr.edu.br; Goncalves, Marcelo de Albuquerque Lima [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)]. E-mail: marcelog@petrobras.com.br
2008-07-01
Corrugated pipes are used in various engineering applications such heat exchangers and oil transport. In most cases these pipes consist of periodically distributed grooves at the duct inner wall. Numerical and experimental works reported the influence of grooves height and length in the turbulent flow by inspection of several turbulent properties such as velocity fluctuations and Reynolds stress. The present article aims to investigate the influence of grooves height and length in the global friction factor of turbulent flow through periodically corrugated pipes. Mass and momentum conservation equations are revised and specific boundary conditions are set to characterize a periodic fully developed regime in a single axisymmetric bidimensional module which represents the periodically corrugated duct geometry. The set of algebraic equations is discretized through the Finite Volume Method, with the Hybrid interpolation scheme applied to the convective terms, and solved using the commercial software PHOENICS CFD. The simulation of turbulent, incompressible, isothermal and single-phase flow is considered. The algebraic turbulence model LVEL is used. Four geometric configurations are assumed, including grooves height and length variations, in order to compare their influence on the friction factor. The obtained numerical friction factors show good agreement with previous experimental results, specially for Reynolds numbers over 20000. Numerical results for corrugated pipes compared to the Blasius smooth pipe correlation shows that the friction factor increases compared to smooth pipes, and such increase is more significant for higher Reynolds numbers and for larger grooves as well. These trends appear to be related to an enhancement of the momentum transport over the corrugated wall due to the recirculating pattern inside the grooves, in accordance with previous experimental works (author)
A hybrid Lagrangian-Eulerian numerical model for sea-ice dynamics
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
A hybrid Lagrangian-Eulerian (HLE) method is developed for sea ice dynamics, which combines the high computational efficiency of finite difference method (FDM) with the high numerical accuracy of smoothed particle hydrodynamics (SPH). In this HLE model, the sea ice cover is represented by a group of Lagrangian ice particles with their own thicknesses and concentrations. These ice variables are interpolated to the Eularian gird nodes using the Gaussian interpolation function. The FDM is used to determine the ice velocities at Eulerian grid nodes, and the velocities of Lagrangian ice particles are interpolated from these grid velocities with the Gaussian function also. The thicknesses and concentrations of ice particles are determined based on their new locations. With the HLE numerical model, the ice ridging process in a rectangular basin is simulated, and the simulated results are validated with the analytical solution. This method is also applied to the simulation of sea ice dynamics in a vortex wind field. At last, this HLE model is applied to the Bohai Sea, and the simulated concentration, thickness and velocity match the satellite images and the field observed data well.
Numerical simulation of seasonal groundwater pumping
Filimonova, Elena; Baldenkov, Mikhail
2015-04-01
Increasing scarcity and contamination of water recourses require innovative water management strategies such as combined water system. The combined water system is a complex technology comprising two separate wells, major catchment-zone well and compensation pumping well, located inside a single stream basin. The major well is supplied by the well's catchment zone or surface flow, thus depleting the stream flow. The pumping rate of a major well is determined by the difference between the current stream flow and the minimum permissible stream flow. The deficiency of the stream flow in dry seasons can be compensated for by the short-term pumping of groundwater. The compensation pumping rate is determined by the difference between water demand and the permissible water withdrawal of the major well. The source for the compensation well is the aquifer storage. The estimation of streamflow depletion caused by compensation pumping is major question to evaluate the efficiency of the combined water system. Short-term groundwater pumping can use aquifer storage instead of catchment-zone water until the drawdown reaches the edge of the stream. Traditionally pumping simulation calculates in two-step procedure. Natural conditions, an aquifer system is in an approximate dynamic equilibrium, describe by steady-state model. A steady-state solution provides an initial heads, a set of flows through boundaries, and used as initial state for transient solutions, when pumping is imposed on an aquifer system. The transient solutions provide the total change in flows through the boundaries. A difference between the transient and steady-state solutions estimates the capture and the streamflow depletion. Numerical modeling of cyclical compensation pumping has special features: the periodic solution, the seasonal changes through the boundaries and the importance even small drawdown of stream level. When seasonality is a modeling feature, traditional approach leads to mistaken values of
Hybrid framework for the simulation of stochastic chemical kinetics
Duncan, Andrew; Erban, Radek; Zygalakis, Konstantinos
2016-12-01
Stochasticity plays a fundamental role in various biochemical processes, such as cell regulatory networks and enzyme cascades. Isothermal, well-mixed systems can be modelled as Markov processes, typically simulated using the Gillespie Stochastic Simulation Algorithm (SSA) [25]. While easy to implement and exact, the computational cost of using the Gillespie SSA to simulate such systems can become prohibitive as the frequency of reaction events increases. This has motivated numerous coarse-grained schemes, where the "fast" reactions are approximated either using Langevin dynamics or deterministically. While such approaches provide a good approximation when all reactants are abundant, the approximation breaks down when one or more species exist only in small concentrations and the fluctuations arising from the discrete nature of the reactions become significant. This is particularly problematic when using such methods to compute statistics of extinction times for chemical species, as well as simulating non-equilibrium systems such as cell-cycle models in which a single species can cycle between abundance and scarcity. In this paper, a hybrid jump-diffusion model for simulating well-mixed stochastic kinetics is derived. It acts as a bridge between the Gillespie SSA and the chemical Langevin equation. For low reactant reactions the underlying behaviour is purely discrete, while purely diffusive when the concentrations of all species are large, with the two different behaviours coexisting in the intermediate region. A bound on the weak error in the classical large volume scaling limit is obtained, and three different numerical discretisations of the jump-diffusion model are described. The benefits of such a formalism are illustrated using computational examples.
Hybrid method of solution applied to simulation of pulse chromatography
Directory of Open Access Journals (Sweden)
M. A. Cremasco
2009-06-01
Full Text Available In this communication, the method proposed by Cremasco et al. (2003 is applied to predict single and low concentration pulse chromatography. In previous work, a general rate model was presented to describe the breakthrough curve, where a hybrid solution was proposed for the linear adsorption. The liquid phase concentration inside the particle was found analytically and related with the bed liquid phase through Duhamel's Theorem, while the bulk-phase equation was solved by a numerical method. In this paper, this method is applied to describe pulse chromatography of solutes that present linear adsorption isotherms. The simulated results of pulse chromatography are compared with experimental ones for aromatic amino acid experiments from literature.
Probing Strong Field Gravity Through Numerical Simulations
Choptuik, Matthew W; Pretorius, Frans
2015-01-01
This article is an overview of the contributions numerical relativity has made to our understanding of strong field gravity, to be published in the book "General Relativity and Gravitation: A Centennial Perspective", commemorating the 100th anniversary of general relativity.
Coherent Structures in Numerically Simulated Plasma Turbulence
DEFF Research Database (Denmark)
Kofoed-Hansen, O.; Pécseli, H.L.; Trulsen, J.
1989-01-01
Low level electrostatic ion acoustic turbulence generated by the ion-ion beam instability was investigated numerically. The fluctuations in potential were investigated by a conditional statistical analysis revealing propagating coherent structures having the form of negative potential wells which...
Numerical simulations of turbulent jet ignition and combustion
Validi, Abdoulahad; Irannejad, Abolfazl; Jaberi, Farhad
2013-11-01
The ignition and combustion of a homogeneous lean hydrogen-air mixture by a turbulent jet flow of hot combustion products injected into a colder gas mixture are studied by a high fidelity numerical model. Turbulent jet ignition can be considered as an efficient method for starting and controlling the reaction in homogeneously charged combustion systems used in advanced internal combustion and gas turbine engines. In this work, we study in details the physics of turbulent jet ignition in a fundamental flow configuration. The flow and combustion are modeled with the hybrid large eddy simulation/filtered mass density function (LES/FMDF) approach, in which the filtered form the compressible Navier-Stokes equations are solved with a high-order finite difference scheme for the turbulent velocity and the FMDF transport equations are solved with a Lagrangian stochastic method to obtain the scalar (temperature and species mass fractions) field. The hydrogen oxidation is described by a detailed reaction mechanism with 37 elementary reactions and 9 species.
Direct numerical simulation of vector-controlled free jets
Energy Technology Data Exchange (ETDEWEB)
Tsujimoto, K; Ao, K; Shakouchi, T; Ando, T, E-mail: tujimoto@mach.mie-u.ac.jp [Graduate School of Engineering, Mie University, Tsu, 514-8507 (Japan)
2011-12-22
We conduct DNS (direct numerical simulation) of vector controlled free jets. The inflow velocity of jet is periodically oscillated perpendicular to the jet axis. In order to realize the high accurate computation, a discretization in space is performed with hybrid scheme in which Fourier spectral and 6th order compact scheme are adopted. From visualized instantaneous vortex structures, it is found that the flow pattern considerably changes according to the oscillating frequency, i.e., according to the increasing the frequency, wave, bifurcating and flapping modes appear in turn. In order to quantify mixing efficiency under the vector control, as the mixing measure, statistical entropy is investigated. Compared to the uncontrolled jet, the mixing efficiency is improved in order of wavy, flapping and bifurcating modes. Thus the vector control can be expected for the improvement of mixing efficiency. Further to make clear the reason for the mixing enhancement, Snapshot POD and DMD method are applied. The primary flow structures under the vector control are demonstrated.
Numerical Simulation of Cyclic Thermodynamic Processes
DEFF Research Database (Denmark)
Andersen, Stig Kildegård
2006-01-01
and a brief overview of the current state of the art in methods for simulating such machines is presented. It was found that different simulation approaches, which model the machines with different levels of detail, currently coexist. Methods using many simplifications can be easy to use and can provide......, and with simulation results from current state of the art software, for two Stirling machines and two pulse tube coolers. Parallelised single and multiple shooting methods were studied and were found to be reliable for finding periodic steady state solutions. Multiple shooting methods had better parallel scalability...
Numerical Propulsion System Simulation for Space Transportation
Owen, Karl
2000-01-01
Current system simulations are mature, difficult to modify, and poorly documented. Probabilistic life prediction techniques for space applications are in their early application stage. Many parts of the full system, variable fidelity simulation, have been demonstrated individually or technology is available from aeronautical applications. A 20% reduction in time to design with improvements in performance and risk reduction is anticipated. GRC software development will proceed with similar development efforts in aeronautical simulations. Where appropriate, parallel efforts will be encouraged/tracked in high risk areas until success is assured.
A wind turbine hybrid simulation framework considering aeroelastic effects
Song, Wei; Su, Weihua
2015-04-01
In performing an effective structural analysis for wind turbine, the simulation of turbine aerodynamic loads is of great importance. The interaction between the wake flow and the blades may impact turbine blades loading condition, energy yield and operational behavior. Direct experimental measurement of wind flow field and wind profiles around wind turbines is very helpful to support the wind turbine design. However, with the growth of the size of wind turbines for higher energy output, it is not convenient to obtain all the desired data in wind-tunnel and field tests. In this paper, firstly the modeling of dynamic responses of large-span wind turbine blades will consider nonlinear aeroelastic effects. A strain-based geometrically nonlinear beam formulation will be used for the basic structural dynamic modeling, which will be coupled with unsteady aerodynamic equations and rigid-body rotations of the rotor. Full wind turbines can be modeled by using the multi-connected beams. Then, a hybrid simulation experimental framework is proposed to potentially address this issue. The aerodynamic-dominant components, such as the turbine blades and rotor, are simulated as numerical components using the nonlinear aeroelastic model; while the turbine tower, where the collapse of failure may occur under high level of wind load, is simulated separately as the physical component. With the proposed framework, dynamic behavior of NREL's 5MW wind turbine blades will be studied and correlated with available numerical data. The current work will be the basis of the authors' further studies on flow control and hazard mitigation on wind turbine blades and towers.
Numerical simulation of the fractional Langevin equation
Directory of Open Access Journals (Sweden)
Guo Peng
2012-01-01
Full Text Available In this paper, we study the fractional Langevin equation, whose derivative is in Caputo sense. By using the derived numerical algorithm, we obtain the displacement and the mean square displacement which describe the dynamic behaviors of the fractional Langevin equation.
Numerical simulations of stellar winds: polytropic models
Keppens, R.; Goedbloed, J. P.
1999-01-01
We discuss steady-state transonic outflows obtained by direct numerical solution of the hydrodynamic and magnetohydrodynamic equations. We make use of the Versatile Advection Code, a software package for solving systems of (hyperbolic) partial differential equations. We proceed stepwise from a spher
Numerical simulation of tyre/road noise
Schutte, Jan Henk
2011-01-01
In modern society, traffic noise has become an important issue for mental health. A significant contributor to this noise pollution is exterior tyre/road noise, which is caused by the interaction between tyre and road surface and. In order to reduce tyre/road noise at the source, accurate numerical
Detailed numerical simulations of laser cooling processes
Ramirez-Serrano, J.; Kohel, J.; Thompson, R.; Yu, N.
2001-01-01
We developed a detailed semiclassical numerical code of the forces applied on atoms in optical and magnetic fields to increase the understanding of the different roles that light, atomic collisions, background pressure, and number of particles play in experiments with laser cooled and trapped atoms.
Numerical Simulation of a Linear Filter.
1967-05-05
spectral density function . The study determines to what degree this method simulates a linear filter. Also included are correlation analyses of equidistributed sequences which are used in the method. (Author)
Polarization transmission at RHIC, numerical simulations
Energy Technology Data Exchange (ETDEWEB)
Meot F.; Bai, M.; Liu, C.; Minty, M.; Ranjbar, V.
2012-05-20
Typical tracking simulations regarding the transmission of the polarization in the proton-proton collider RHIC are discussed. They participate in general studies aimed at understanding and improving polarization performances during polarized proton-proton runs.
A numerical simulation of a contrail
Energy Technology Data Exchange (ETDEWEB)
Levkov, L.; Boin, M.; Meinert, D. [GKSS-Forschungszentrum Geesthacht GmbH, Geesthacht (Germany)
1997-12-31
The formation of a contrail from an aircraft flying near the tropopause is simulated using a three-dimensional mesoscale atmospheric model including a very complex scheme of parameterized cloud microphysical processes. The model predicted ice concentrations are in very good agreement with data measured during the International Cirrus Experiment (ICE), 1989. Sensitivity simulations were run to determine humidity forcing on the life time of contrails. (author) 4 refs.
Hybrid2: The hybrid system simulation model, Version 1.0, user manual
Energy Technology Data Exchange (ETDEWEB)
Baring-Gould, E.I.
1996-06-01
In light of the large scale desire for energy in remote communities, especially in the developing world, the need for a detailed long term performance prediction model for hybrid power systems was seen. To meet these ends, engineers from the National Renewable Energy Laboratory (NREL) and the University of Massachusetts (UMass) have spent the last three years developing the Hybrid2 software. The Hybrid2 code provides a means to conduct long term, detailed simulations of the performance of a large array of hybrid power systems. This work acts as an introduction and users manual to the Hybrid2 software. The manual describes the Hybrid2 code, what is included with the software and instructs the user on the structure of the code. The manual also describes some of the major features of the Hybrid2 code as well as how to create projects and run hybrid system simulations. The Hybrid2 code test program is also discussed. Although every attempt has been made to make the Hybrid2 code easy to understand and use, this manual will allow many organizations to consider the long term advantages of using hybrid power systems instead of conventional petroleum based systems for remote power generation.
A hybrid convection scheme for use in non-hydrostatic numerical weather prediction models
Directory of Open Access Journals (Sweden)
Volker Kuell
2008-12-01
Full Text Available The correct representation of convection in numerical weather prediction (NWP models is essential for quantitative precipitation forecasts. Due to its small horizontal scale convection usually has to be parameterized, e.g. by mass flux convection schemes. Classical schemes originally developed for use in coarse grid NWP models assume zero net convective mass flux, because the whole circulation of a convective cell is confined to the local grid column and all convective mass fluxes cancel out. However, in contemporary NWP models with grid sizes of a few kilometers this assumption becomes questionable, because here convection is partially resolved on the grid. To overcome this conceptual problem we propose a hybrid mass flux convection scheme (HYMACS in which only the convective updrafts and downdrafts are parameterized. The generation of the larger scale environmental subsidence, which may cover several grid columns, is transferred to the grid scale equations. This means that the convection scheme now has to generate a net convective mass flux exerting a direct dynamical forcing to the grid scale model via pressure gradient forces. The hybrid convection scheme implemented into the COSMO model of Deutscher Wetterdienst (DWD is tested in an idealized simulation of a sea breeze circulation initiating convection in a realistic manner. The results are compared with analogous simulations with the classical Tiedtke and Kain-Fritsch convection schemes.
A hybrid simulation model for a stable auroral arc
Directory of Open Access Journals (Sweden)
P. Janhunen
Full Text Available We present a new type of hybrid simulation model, intended to simulate a single stable auroral arc in the latitude/altitude plane. The ionospheric ions are treated as particles, the electrons are assumed to follow a Boltzmann response and the magnetospheric ions are assumed to be so hot that they form a background population unaffected by the electric fields that arise. The system is driven by assumed parallel electron energisation causing a primary negative charge cloud and an associated potential structure to build up. The results show how a closed potential structure and density depletion of an auroral arc build up and how they decay after the driver is turned off. The model also produces upgoing energetic ion beams and predicts strong static perpendicular electric fields to be found in a relatively narrow altitude range (~ 5000–11 000 km.
Key words. Magnetospheric physics (magnetosphere-ionosphere interactions; auroral phenomena – Space plasma physics (numerical simulation studies
Numerical Simulation of the Lightning Return Stroke.
da Frota Mattos, Marcos Andre
Available from UMI in association with The British Library. Requires signed TDF. Several lightning return stroke models were developed in this work. Initially very simple models were developed, and subsequently many of the main features of the channel were added. The corona effect, the geometrical parameters, non-linear losses and the cloud losses are these features. To solve the RLC network model of the channel the numerical technique known as TLM was used. A numerical sensitivity study was made to analyse the influence of the filtering and the Gibbs effects on the results. A sensitivity study of the channel's parameters was also made. For the first time three of the main measured lightning channel quantities were calculated showing good agreement with observations. These quantities are the electromagnetic field, current waveshape at ground and the velocity of propagation. The surge impedence and the current rise-time were also calculated at all heights.
Numerical Simulation of Oil Spill in Ocean
Directory of Open Access Journals (Sweden)
Yong-Sik Cho
2012-01-01
Full Text Available The spreading of oil in an open ocean may cause serious damage to a marine environmental system. Thus, an accurate prediction of oil spill is very important to minimize coastal damage due to unexpected oil spill accident. The movement of oil may be represented with a numerical model that solves an advection-diffusion-reaction equation with a proper numerical scheme. In this study, the spilled oil dispersion model has been established in consideration of tide and tidal currents simultaneously. The velocity components in the advection-diffusion-reaction equation are obtained from the shallow-water equations. The accuracy of the model is verified by applying it to a simple but significant problem. The results produced by the model agree with corresponding analytical solutions and field-observed data. The model is then applied to predict the spreading of an oil spill in a real coastal environment.
Numerical Simulation of Piston Ring Lubrication
DEFF Research Database (Denmark)
Felter, Christian Lotz
2006-01-01
This paper describes a numerical method that can be used to model the lubrication of piston rings. Classical lubrication theory is based on the Reynolds equation which is ap- plicable to confined geometries and open geometries where the flooding conditions are known. Lubrication of piston rings...... is extended to include also the oil film outside the piston rings. The numerical model consists of a 2D free surface code that solves the time dependent compressible Navier-Stokes equations. The equations are cast in Lagrangian form and discretized by a meshfree moving least squares method using the primitive......, however, fall outside this category of problems since the piston rings might suffer from starved running conditions. This means that the com- putational domain where Reynold equation is applicable (including a cavitation criteria) is unknown. In order to overcome this problem the computational domain...
Numerical characteristics of quantum computer simulation
Chernyavskiy, A.; Khamitov, K.; Teplov, A.; Voevodin, V.; Voevodin, Vl.
2016-12-01
The simulation of quantum circuits is significantly important for the implementation of quantum information technologies. The main difficulty of such modeling is the exponential growth of dimensionality, thus the usage of modern high-performance parallel computations is relevant. As it is well known, arbitrary quantum computation in circuit model can be done by only single- and two-qubit gates, and we analyze the computational structure and properties of the simulation of such gates. We investigate the fact that the unique properties of quantum nature lead to the computational properties of the considered algorithms: the quantum parallelism make the simulation of quantum gates highly parallel, and on the other hand, quantum entanglement leads to the problem of computational locality during simulation. We use the methodology of the AlgoWiki project (algowiki-project.org) to analyze the algorithm. This methodology consists of theoretical (sequential and parallel complexity, macro structure, and visual informational graph) and experimental (locality and memory access, scalability and more specific dynamic characteristics) parts. Experimental part was made by using the petascale Lomonosov supercomputer (Moscow State University, Russia). We show that the simulation of quantum gates is a good base for the research and testing of the development methods for data intense parallel software, and considered methodology of the analysis can be successfully used for the improvement of the algorithms in quantum information science.
Fastening elements in concrete structures - numerical simulations
Ozbolt, Josko; Eligehausen, Rolf
1993-01-01
Anchoring elements such as headed and expansion studs and grouted or undercut anchors, are often used for local transfer of loads into concrete members. In order to better understand the failure mechanism, a large number of experiments have been carried out in the past. However, due to the complicated three-dimensional load transfer a very few or no numerical studies have been performed for a number of different fastening situations i.e. influence of the embedment depth, crack-width inftuence...
Numerical simulation of magmatic hydrothermal systems
Ingebritsen, S.E.; Geiger, S.; Hurwitz, S.; Driesner, T.
2010-01-01
The dynamic behavior of magmatic hydrothermal systems entails coupled and nonlinear multiphase flow, heat and solute transport, and deformation in highly heterogeneous media. Thus, quantitative analysis of these systems depends mainly on numerical solution of coupled partial differential equations and complementary equations of state (EOS). The past 2 decades have seen steady growth of computational power and the development of numerical models that have eliminated or minimized the need for various simplifying assumptions. Considerable heuristic insight has been gained from process-oriented numerical modeling. Recent modeling efforts employing relatively complete EOS and accurate transport calculations have revealed dynamic behavior that was damped by linearized, less accurate models, including fluid property control of hydrothermal plume temperatures and three-dimensional geometries. Other recent modeling results have further elucidated the controlling role of permeability structure and revealed the potential for significant hydrothermally driven deformation. Key areas for future reSearch include incorporation of accurate EOS for the complete H2O-NaCl-CO2 system, more realistic treatment of material heterogeneity in space and time, realistic description of large-scale relative permeability behavior, and intercode benchmarking comparisons. Copyright 2010 by the American Geophysical Union.
Hybrid and Electric Advanced Vehicle Systems Simulation
Beach, R. F.; Hammond, R. A.; Mcgehee, R. K.
1985-01-01
Predefined components connected to represent wide variety of propulsion systems. Hybrid and Electric Advanced Vehicle System (HEAVY) computer program is flexible tool for evaluating performance and cost of electric and hybrid vehicle propulsion systems. Allows designer to quickly, conveniently, and economically predict performance of proposed drive train.
MATHEMATICAL MODELS AND NUMERICAL SIMULATION FOR DENSE PARTICULATE FLOWS
Institute of Scientific and Technical Information of China (English)
WU Chun-liang
2004-01-01
Sedimentation of particles in inclined and vertical vessels is numerically simulated by the Eulerian two-fluid model. The numerical results show an interesting phenomenon with two circulation vortexes in a vertical vessel but one in the inclined vessel. Sensitivity tests indicate that the boundary layer effect is the key to induce this phenomenon. A numerical method based on 2D unstructured meshes is presented to solve the hard-sphere discrete particle model. Several applications show the numerical method has a good performance to simulate dense particulate flows in irregular domains without regard to element types of the mesh.
Numerical simulation of AM1 microstructure
Directory of Open Access Journals (Sweden)
Rougier Luc
2014-01-01
Full Text Available A modelling approach is developed for the description of microstructure formation in the industrial AM1 Ni-base superalloy. Solidification and homogenization simulations are first carried out using a microsegregation model, before using the local compositions as an input for precipitation calculations, in order to characterize the influence of segregation on precipitation. First, the precipitation model was validated by comparing simulated and measured evolutions of the average precipitate radius during isothermal heat treatments at 1100 ∘C and 1210 ∘C. The chained microsegregation and precipitation simulations indicate that the global sequences of precipitation events remains are qualitatively the same at the different locations in the microstructure, but the growth and dissolution kinetics are strongly influenced by the local compositions. Local supersaturations have a larger effect on the average radius of the precipitates than certain stages of the precipitation heat treatment.
Study on numerical simulation of nodular graphite iron microstructure formation
Institute of Scientific and Technical Information of China (English)
无
2004-01-01
In this paper, the mathematical and physical model was developed based on thermodynamics and solidification theory before the eutectoid transformation of nodular graphite iron occurred. The Local Element Substitute and Magnification Method was brought forward and 3-dimensional numerical simulation program based on the model and the new assistant algorithm was developed and used to calculate the samples. Results of calculation have good agreement with experimental data. To display the microstructure formation during solidification of nodular graphite iron, a 2-dimensional numerical simulation program combined with the result of the 3-dimensional numerical simulation of experimental samples was compiled.
Numerical simulation of hot stamping of side impact beam
Institute of Scientific and Technical Information of China (English)
Guo Yihui; Ma Mingtu; Fang Gang; Song Leifeng; Liu Qiang; Wang Xiaona; Zhou Dianwu
2012-01-01
Ls-DYNA software is adopted to conduct research of numerical simulation on hot stamping of side impact beam to calculate the temperature field distribution, stress field distribution, forming limit diagram (FLD) figure, etc. in the course of hot stamping so as to predict and analyze the formability of parts. ProCAST software is employed to conduct research of numerical simulation on solid quenching course concerning hot stamping to calculate temperature field distri- bution of tools and component of muhiple stamping cycles. The results obtained from numerical simulation can provide significant reference value to hot stamping part design, formability predication and tools cooling system design.
Numerical earthquake simulations for seismic hazard assessment
Ismail-Zadeh, Alik; Sokolov, Vladimir; Soloviev, Alexander
2017-04-01
A comprehensive seismic hazard assessment can contribute to earthquake preparedness and preventive measures aimed to reduce impacts of earthquakes, especially in the view of growing population and increasing vulnerability and exposure. Realistic earthquake simulations coupled with a seismic hazard analysis can provide better assessments of potential ground shaking due to large earthquakes. We present a model of block-and-fault dynamics, which simulates earthquakes in response to lithosphere movements and allows for studying the influence of fault network properties on seismic patterns. Using case studies (e.g., the Tibet-Himalayan region and the Caucasian region), we analyse the model's performance in terms of reproduction of basic features of the observed seismicity, such as the frequency-magnitude relationship, clustering of earthquakes, occurrences of large events, fault slip rates, and earthquake mechanisms. We examine a new approach to probabilistic seismic hazard assessment, which is based on instrumentally recorded, historical and simulated earthquakes. Based on predicted and observed peak ground acceleration values, we show that the hazard level associated with large events significantly increases if the long record of simulated seismicity is considered in the hazard assessment.
Pseudo-reconnection in MHD numerical simulation
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
A class of pseudo-reconnections caused by a shifted mesh in magnetohydrodynamics (MHD) simulations is reported. In terms of this mesh system, some non-physical results may be obtained in certain circumstances, e.g. magnetic reconnection occurs without resistivity. After comparison, another kind of mesh is strongly recommended.
Numerical simulations of nanostructured gold films
DEFF Research Database (Denmark)
Repän, Taavi; Frydendahl, Christian; Novikov, Sergey M.
2017-01-01
We present an approach to analyse near-field effects on nanostructured gold films by finite element simulations. The studied samples are formed by fabricating gold films near the percolation threshold and then applying laser damage. Resulting samples have complicated structures, which...
NUMERICAL SIMULATION OF SCOURING PROCESS UNDER SPILLWAY
Institute of Scientific and Technical Information of China (English)
无
2001-01-01
The scour problem under spillway has received a lot of attention in the past decades. For such a complicated problem, most numerical modeling presented only dealt with the water flows in equilibrium scour pools without considering the changing topography of the riverbed. In this paper, the dynamic process is handled with moving grids, and the governing equations are solved using finite volume method with colocated variable arrangement on boundary-fitted non-orthogonal grids. The results show that the given method is efficient, with which the variation of flow parameters, such as mean velocity and mean pressure, etc., can be computed correctly.
Numerical Simulation of Rotating Vertical Bridgman Growth
Directory of Open Access Journals (Sweden)
S. Nouri
2016-01-01
Full Text Available The present work is proposed a numerical parametric study of heat and mass transfer in a rotating vertical cylinder during the solidification of a binary metallic alloy. The aim of this paper is to present an enthalpy formulation based on the fixed grid methodology for the numerical solution of convective-diffusion during the phase change in the case of the steady crucible rotation. The extended Darcy model including the time derivative and Coriolis terms was applied as momentum equation. It was found that the buoyancy driven flow and solute distribution can be affected significantly by the rotating cylinder. The problem is governed by the Navier-Stokes equations coupled with the conservation laws of energy and solute. The resulting system was discretized by the control volume method and solved by the SIMPLER algorithm proposed by Patankar. A computer code was developed and validated by comparison with previous studies. It can be observed that the forced convection introduced by rotation, dramatically changes the flow and solute distribution at the interface (liquid-mushy zone. The effect of Reynolds number on the Nusselt number, flow and solute distribution is presented and discussed.
Numerical simulation of avascular tumor growth
Energy Technology Data Exchange (ETDEWEB)
Slezak, D Fernandez; Suarez, C; Soba, A; Risk, M; Marshall, G [Laboratorio de Sistemas Complejos, Departamento de Computacion, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires (C1428EGA) Buenos Aires (Argentina)
2007-11-15
A mathematical and numerical model for the description of different aspects of microtumor development is presented. The model is based in the solution of a system of partial differential equations describing an avascular tumor growth. A detailed second-order numeric algorithm for solving this system is described. Parameters are swiped to cover a range of feasible physiological values. While previous published works used a single set of parameters values, here we present a wide range of feasible solutions for tumor growth, covering a more realistic scenario. The model is validated by experimental data obtained with a multicellular spheroid model, a specific type of in vitro biological model which is at present considered to be optimum for the study of complex aspects of avascular microtumor physiology. Moreover, a dynamical analysis and local behaviour of the system is presented, showing chaotic situations for particular sets of parameter values at some fixed points. Further biological experiments related to those specific points may give potentially interesting results.
Electric and plug-in hybrid vehicles advanced simulation methodologies
Varga, Bogdan Ovidiu; Moldovanu, Dan; Iclodean, Calin
2015-01-01
This book is designed as an interdisciplinary platform for specialists working in electric and plug-in hybrid electric vehicles powertrain design and development, and for scientists who want to get access to information related to electric and hybrid vehicle energy management, efficiency and control. The book presents the methodology of simulation that allows the specialist to evaluate electric and hybrid vehicle powertrain energy flow, efficiency, range and consumption. The mathematics behind each electric and hybrid vehicle component is explained and for each specific vehicle the powertrain
Radiative Transfer in 3D Numerical Simulations
Stein, R; Stein, Robert; Nordlund, Aake
2002-01-01
We simulate convection near the solar surface, where the continuum optical depth is of order unity. Hence, to determine the radiative heating and cooling in the energy conservation equation, we must solve the radiative transfer equation (instead of using the diffusion or optically thin cooling approximations). A method efficient enough to calculate the radiation for thousands of time steps is needed. We assume LTE and a non-gray opacity grouped into 4 bins according to strength. We perform a formal solution of the Feautrier equation along a vertical and four straight, slanted, rays (at four azimuthal angles which are rotated 15 deg. every time step). We present details of our method. We also give some results: comparing simulated and observed line profiles for the Sun, showing the importance of 3D transfer for the structure of the mean atmosphere and the eigenfrequencies of p-modes, illustrating Stokes profiles for micropores, and analyzing the effect of radiation on p-mode asymmetries.
Numerical simulation of imaging laser radar system
Han, Shaokun; Lu, Bo; Jiang, Ming; Liu, Xunliang
2008-03-01
Rational and effective design of imaging laser radar systems is the key of imaging laser radar system research. Design must fully consider the interrelationship between various parameters. According to the parameters, choose suitable laser, detector and other components. To use of mathematical modeling and computer simulation is an effective imaging laser radar system design methods. This paper based on the distance equation, using the detection statistical methods, from the laser radar range coverage, detection probability, false-alarm rate, SNR to build the laser radar system mathematical models. In the process of setting up the mathematical models to fully consider the laser, atmosphere, detector and other factors on the performance that is to make the models be able to respond accurately the real situation. Based on this using C# and Matlab designed a simulation software.
Institute of Scientific and Technical Information of China (English)
LI; XinTian; TIAN; Hui; CAI; GuoBiao
2013-01-01
This paper presents three-dimensional numerical simulations of the hybrid rocket motor with hydrogen peroxide (HP) and hy-droxyl terminated polybutadiene (HTPB) propellant combination and investigates the fuel regression rate distribution charac-teristics of different fuel types. The numerical models are established to couple the Navier-Stokes equations with turbulence,chemical reactions, solid fuel pyrolysis and solid-gas interfacial boundary conditions. Simulation results including the temper-ature contours and fuel regression rate distributions are presented for the tube, star and wagon wheel grains. The results demonstrate that the changing trends of the regression rate along the axis are similar for all kinds of fuel types, which decrease sharply near the leading edges of the fuels and then gradually increase with increasing axial locations. The regression rates of the star and wagon wheel grains show apparent three-dimensional characteristics, and they are higher in the regions of fuel surfaces near the central core oxidizer flow. The average regression rates increase as the oxidizer mass fluxes rise for all of the fuel types. However, under same oxidizer mass flux, the average regression rates of the star and wagon wheel grains are much larger than that of the tube grain due to their lower hydraulic diameters.
Stress analysis and damage evaluation of flawed composite laminates by hybrid-numerical methods
Yang, Yii-Ching
1992-01-01
Structural components in flight vehicles is often inherited flaws, such as microcracks, voids, holes, and delamination. These defects will degrade structures the same as that due to damages in service, such as impact, corrosion, and erosion. It is very important to know how a structural component can be useful and survive after these flaws and damages. To understand the behavior and limitation of these structural components researchers usually do experimental tests or theoretical analyses on structures with simulated flaws. However, neither approach has been completely successful. As Durelli states that 'Seldom does one method give a complete solution, with the most efficiency'. Examples of this principle is seen in photomechanics which additional strain-gage testing can only average stresses at locations of high concentration. On the other hand, theoretical analyses including numerical analyses are implemented with simplified assumptions which may not reflect actual boundary conditions. Hybrid-Numerical methods which combine photomechanics and numerical analysis have been used to correct this inefficiency since 1950's. But its application is limited until 1970's when modern computer codes became available. In recent years, researchers have enhanced the data obtained from photoelasticity, laser speckle, holography and moire' interferometry for input of finite element analysis on metals. Nevertheless, there is only few of literature being done on composite laminates. Therefore, this research is dedicated to this highly anisotropic material.
A hybrid Eulerian Lagrangian numerical scheme for solving prognostic equations in fluid dynamics
Directory of Open Access Journals (Sweden)
E. Kaas
2013-07-01
Full Text Available A new hybrid Eulerian Lagrangian numerical scheme (HEL for solving prognostic equations in fluid dynamics is proposed. The basic idea is to use an Eulerian as well as a fully Lagrangian representation of all prognostic variables. The time step in Lagrangian space is obtained as a translation of irregularly spaced Lagrangian parcels along downstream trajectories. Tendencies due to other physical processes than advection are calculated in Eulerian space, interpolated, and added to the Lagrangian parcel values. A directionally biased mixing amongst neighboring Lagrangian parcels is introduced. The rate of mixing is proportional to the local deformation rate of the flow. The time stepping in Eulerian representation is achieved in two steps: first a mass conserving Eulerian or semi-Lagrangian scheme is used to obtain a provisional forecast. This forecast is then nudged towards target values defined from the irregularly spaced Lagrangian parcel values. The nudging procedure is defined in such a way that mass conservation and shape preservation is ensured in Eulerian space. The HEL scheme has been designed to be accurate, multi-tracer efficient, mass conserving, and shape preserving. In Lagrangian space only physically based mixing takes place, i.e., the problem of artificial numerical mixing is avoided. This property is desirable in atmospheric chemical transport models since spurious numerical mixing can impact chemical concentrations severely. The properties of HEL are here verified in two-dimensional tests. These include deformational passive transport on the sphere, and simulations with a semi-implicit shallow water model including topography.
Numerical simulation of the LAGEOS thermal behavior and thermal accelerations
Andrés, J.I.; Noomen, R.; Vecellio None, S.
2006-01-01
The temperature distribution throughout the LAGEOS satellites is simulated numerically with the objective to determine the resulting thermal force. The different elements and materials comprising the spacecraft, with their energy transfer, have been modeled with unprecedented detail. The radiation i
Fluid dynamics theory, computation, and numerical simulation
Pozrikidis, C
2017-01-01
This book provides an accessible introduction to the basic theory of fluid mechanics and computational fluid dynamics (CFD) from a modern perspective that unifies theory and numerical computation. Methods of scientific computing are introduced alongside with theoretical analysis and MATLAB® codes are presented and discussed for a broad range of topics: from interfacial shapes in hydrostatics, to vortex dynamics, to viscous flow, to turbulent flow, to panel methods for flow past airfoils. The third edition includes new topics, additional examples, solved and unsolved problems, and revised images. It adds more computational algorithms and MATLAB programs. It also incorporates discussion of the latest version of the fluid dynamics software library FDLIB, which is freely available online. FDLIB offers an extensive range of computer codes that demonstrate the implementation of elementary and advanced algorithms and provide an invaluable resource for research, teaching, classroom instruction, and self-study. This ...
Numerical Simulation of a Negative Impulsive Wave
Institute of Scientific and Technical Information of China (English)
ToshiakiSETOGUCHI; ShenYU; 等
1996-01-01
A compression wave discharged from an open end of a tube causes positive impulsive noise,Active noise cancellation which is the cancelling of the noise by the addition of an inverse wave is a useful technique for reducing impulsive noise,The main objective of this study is to present the design for a negative impulsive wave generator utilizing unsteady mass influx.In this paper,in order to clarify the relationship between the unsteady mass influx and the negative impulsive wave,numerical and aeroacoustic analyses have been carried out using an unsteady expansion wave discharged from an open end of a shock tube.As a result,the effect of an unsteady expansion wave on a negative impulsive wave was charified.
Partial Differential Equations Modeling and Numerical Simulation
Glowinski, Roland
2008-01-01
This book is dedicated to Olivier Pironneau. For more than 250 years partial differential equations have been clearly the most important tool available to mankind in order to understand a large variety of phenomena, natural at first and then those originating from human activity and technological development. Mechanics, physics and their engineering applications were the first to benefit from the impact of partial differential equations on modeling and design, but a little less than a century ago the Schrödinger equation was the key opening the door to the application of partial differential equations to quantum chemistry, for small atomic and molecular systems at first, but then for systems of fast growing complexity. Mathematical modeling methods based on partial differential equations form an important part of contemporary science and are widely used in engineering and scientific applications. In this book several experts in this field present their latest results and discuss trends in the numerical analy...
Numerical simulations of stellar winds polytropic models
Keppens, R
1999-01-01
We discuss steady-state transonic outflows obtained by direct numerical solution of the hydrodynamic and magnetohydrodynamic equations. We make use of the Versatile Advection Code, a software package for solving systems of (hyperbolic) partial differential equations. We proceed stepwise from a spherically symmetric, isothermal, unmagnetized, non-rotating Parker wind to arrive at axisymmetric, polytropic, magnetized, rotating models. These represent 2D generalisations of the analytical 1D Weber-Davis wind solution, which we obtain in the process. Axisymmetric wind solutions containing both a `wind' and a `dead' zone are presented. Since we are solving for steady-state solutions, we efficiently exploit fully implicit time stepping. The method allows us to model thermally and/or magneto-centrifugally driven stellar outflows. We particularly emphasize the boundary conditions imposed at the stellar surface. For these axisymmetric, steady-state solutions, we can use the knowledge of the flux functions to verify the...
Numerical simulation of distributed parameter processes
Colosi, Tiberiu; Unguresan, Mihaela-Ligia; Muresan, Vlad
2013-01-01
The present monograph defines, interprets and uses the matrix of partial derivatives of the state vector with applications for the study of some common categories of engineering. The book covers broad categories of processes that are formed by systems of partial derivative equations (PDEs), including systems of ordinary differential equations (ODEs). The work includes numerous applications specific to Systems Theory based on Mpdx, such as parallel, serial as well as feed-back connections for the processes defined by PDEs. For similar, more complex processes based on Mpdx with PDEs and ODEs as components, we have developed control schemes with PID effects for the propagation phenomena, in continuous media (spaces) or discontinuous ones (chemistry, power system, thermo-energetic) or in electro-mechanics (railway – traction) and so on. The monograph has a purely engineering focus and is intended for a target audience working in extremely diverse fields of application (propagation phenomena, diffusion, hydrodyn...
NUMERICAL SIMULATION OF SEDIMENT RELEASE FROM RESERVOIRS
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
For the computation of the sediment quantity released from reservoirs, a vertical two-dimensional hydrodynamic model is combined with a sediment transport model. The hydrodynamic model is based on the equations of mass and momentum conservation along with a k - ε model for closure of the Reynolds stresses. The sediment transport model is based on the convection-diffusion equation of sediment concentration and the sediment continuity equation. Both the hydrodynamic and sediment transport models are developed in a boundary-fitted curvilinear co-ordinate system. Comparison of the predicted mean velocity field with laboratory results indicates that the present model captures most experimental trends with reasonable accuracy. Also good agreement is found in comparison of the sediment transport results for the numerical model and the experimental model.
Numerical simulation of icing, deicing, and shedding
Wright, W. B.; Dewitt, K. J.; Keith, T. G., Jr.
1991-01-01
An algorithm has been developed to numerically model the concurrent phenomena of two-dimensional transient heat transfer, ice accretion, ice shedding and ice trajectory which arise from the use of electrothermal pad. The Alternating Direction Implicit method is used to simultaneously solve the heat transfer and accretion equations occurring in the multilayered body covered with ice. In order to model the phase change between ice and water, a technique was used which assumes a phase for each node. This allows the equations to be linearized such that a direct solution is possible. This technique requires an iterative procedure to find the correct phase at each node. The computer program developed to find this solution has been integrated with the NASA-Lewis flow/trajectory code LEWICE.
Vector Potential Generation for Numerical Relativity Simulations
Silberman, Zachary; Faber, Joshua; Adams, Thomas; Etienne, Zachariah; Ruchlin, Ian
2017-01-01
Many different numerical codes are employed in studies of highly relativistic magnetized accretion flows around black holes. Based on the formalisms each uses, some codes evolve the magnetic field vector B, while others evolve the magnetic vector potential A, the two being related by the curl: B=curl(A). Here, we discuss how to generate vector potentials corresponding to specified magnetic fields on staggered grids, a surprisingly difficult task on finite cubic domains. The code we have developed solves this problem in two ways: a brute-force method, whose scaling is nearly linear in the number of grid cells, and a direct linear algebra approach. We discuss the success both algorithms have in generating smooth vector potential configurations and how both may be extended to more complicated cases involving multiple mesh-refinement levels. NSF ACI-1550436
A hybrid local/non-local framework for the simulation of damage and fracture
Azdoud, Yan
2014-01-01
Recent advances in non-local continuum models, notably peridynamics, have spurred a paradigm shift in solid mechanics simulation by allowing accurate mathematical representation of singularities and discontinuities. This doctoral work attempts to extend the use of this theory to a community more familiar with local continuum models. In this communication, a coupling strategy - the morphing method -, which bridges local and non-local models, is presented. This thesis employs the morphing method to ease use of the non-local model to represent problems with failure-induced discontinuities. First, we give a quick review of strategies for the simulation of discrete degradation, and suggest a hybrid local/non-local alternative. Second, we present the technical concepts involved in the morphing method and evaluate the quality of the coupling. Third, we develop a numerical tool for the simulation of the hybrid model for fracture and damage and demonstrate its capabilities on numerical model examples
Numerical Simulations of a Possible Hypercomputational Quantum Algorithm
Sicard, Andrés; Ospina, Juan; Vélez, Mario
2005-01-01
The hypercomputers compute functions or numbers, or more generally solve problems or carry out tasks, that cannot be computed or solved by a Turing machine. Several numerical simulations of a possible hypercomputational algorithm based on quantum computations previously constructed by the authors are presented. The hypercomputability of our algorithm is based on the fact that this algorithm could solve a classically non-computable decision problem, Hilbert's tenth problem. The numerical simul...
Numerical Simulation of Physical and Chemical Processes in Fluidized Bed
Baturin, D. A.; Gil, A. V.
2015-10-01
The paper presents a numerical simulation of the furnace with a circulating fluidized bed. Numerical study carried out for the bottom of the combustion chamber with the varying heights of volume filling. The results contours of particulate matter concentration and of velocities, as well as a graphical representation of changes in the concentration of particles on the bed height are shown. Simulation performed in Eulerian - Eulerian representation on a 2D model.
Simulation of hybrid solar power plants
Dieckmann, Simon; Dersch, Jürgen
2017-06-01
Hybrid solar power plants have the potential to combine advantages of two different technologies at the cost of increased complexity. The present paper shows the potential of the software greenius for the techno-economic evaluation of hybrid solar power plants and discusses two exemplary scenarios. Depreciated Concentrated Solar Power (CSP) plants based on trough technology can be retrofitted with solar towers in order to reach higher steam cycle temperatures and hence efficiencies. Compared to a newly built tower plant the hybridization of a depreciated trough plant causes about 30% lower LCOE reaching 104 /MWh. The second hybrid scenario combines cost-efficient photovoltaics with dispatchable CSP technology. This hybrid plant offers very high capacity factors up to 69% based on 100% load from 8am to 11pm. The LCOE of the hybrid plant are only slightly lower (174 vs. 186 /MWh) compared to the pure CSP plant because the capital expenditure for thermal storage and power block remains the same while the electricity output is much lower.
A numerical relativity scheme for cosmological simulations
Daverio, David; Mitsou, Ermis
2016-01-01
Fully non-linear cosmological simulations may prove relevant in understanding relativistic/non-linear features and, therefore, in taking full advantage of the upcoming survey data. We propose a new 3+1 integration scheme which is based on the presence of a perfect fluid (hydro) field, evolves only physical states by construction and passes the robustness test on an FLRW space-time. Although we use General Relativity as an example, the idea behind that scheme is applicable to any generally-covariant modified gravity theory and/or matter content, including a N-body sector.
Numerical simulations of cardiovascular diseases and global matter transport
Simakov, S S; Evdokimov, A V; Kholodov, Y A
2007-01-01
Numerical model of the peripheral circulation and dynamical model of the large vessels and the heart are discussed in this paper. They combined together into the global model of blood circulation. Some results of numerical simulations concerning matter transport through the human organism and heart diseases are represented in the end.
NUMERICAL SIMULATION OF TRANSIENT THERMAL FIELD IN LASER MELTING PROCESS
Institute of Scientific and Technical Information of China (English)
姚国凤; 陈光南
2004-01-01
Numerical simulation of thermal field was studied in laser processing. The 3 -D finite element model of transient thermal calculation is given by thermal conductive equation.The effects of phase transformation latent are considered. Numerical example is given to verify the model. Finally the real example of transient thermal field is given.
Stochastic Analysis Method of Sea Environment Simulated by Numerical Models
Institute of Scientific and Technical Information of China (English)
刘德辅; 焦桂英; 张明霞; 温书勤
2003-01-01
This paper proposes the stochastic analysis method of sea environment simulated by numerical models, such as wave height, current field, design sea levels and longshore sediment transport. Uncertainty and sensitivity analysis of input and output factors of numerical models, their long-term distribution and confidence intervals are described in this paper.
Kulikov, Igor; Chernykh, Igor; Tutukov, Alexander
2016-05-01
This paper presents a new hydrodynamic model of interacting galaxies based on the joint solution of multicomponent hydrodynamic equations, first moments of the collisionless Boltzmann equation and the Poisson equation for gravity. Using this model, it is possible to formulate a unified numerical method for solving hyperbolic equations. This numerical method has been implemented for hybrid supercomputers with Intel Xeon Phi accelerators. The collision of spiral and disk galaxies considering the star formation process, supernova feedback and molecular hydrogen formation is shown as a simulation result.
Numerical and laboratory simulations of auroral acceleration
Energy Technology Data Exchange (ETDEWEB)
Gunell, H.; De Keyser, J. [1Belgian Institute for Space Aeronomy, Avenue Circulaire 3, B-1180 Brussels (Belgium); Mann, I. [EISCAT Scientific Association, P.O. Box 812, SE-981 28 Kiruna, Sweden and Department of Physics, Umeå University, SE-901 87 Umeå (Sweden)
2013-10-15
The existence of parallel electric fields is an essential ingredient of auroral physics, leading to the acceleration of particles that give rise to the auroral displays. An auroral flux tube is modelled using electrostatic Vlasov simulations, and the results are compared to simulations of a proposed laboratory device that is meant for studies of the plasma physical processes that occur on auroral field lines. The hot magnetospheric plasma is represented by a gas discharge plasma source in the laboratory device, and the cold plasma mimicking the ionospheric plasma is generated by a Q-machine source. In both systems, double layers form with plasma density gradients concentrated on their high potential sides. The systems differ regarding the properties of ion acoustic waves that are heavily damped in the magnetosphere, where the ion population is hot, but weakly damped in the laboratory, where the discharge ions are cold. Ion waves are excited by the ion beam that is created by acceleration in the double layer in both systems. The efficiency of this beam-plasma interaction depends on the acceleration voltage. For voltages where the interaction is less efficient, the laboratory experiment is more space-like.
Numerical simulation of ventilation in blinding heading
Institute of Scientific and Technical Information of China (English)
CHANG De-qiang; LIU Jing-xian; CHEN Bao-zhi
2008-01-01
The way of ventilation in all its forms and characteristics in the blinding heading was studied. On the basis of computational fluid dynamics (CFD) the turbulence model of restrained ventilation in blinding heading was set up, and the calculation boundary condi-tions were analyzed. According to the practice application the three-dimensional flow field of ventilation in blinding heading was simulated by the computational fluid dynamics soft-ware. The characteristics of the ventilation flow field such as the temperature field zone and the flow filed zone and the rule of the flow velocity were obtained. The ventilation in blinding heading under certain circumstances was calculated and simulated for optimiza-tion. The optimal ventilation form and related parameters under given condition were ob-tained. The rule of the ventilation in blinding heading was theoretical analyzed, which pro-vided reference for the research on the process of mass transfer, the rule of hazardous substances transportation and ventilation efficiency, provided a new method for the study of reasonable and effective ventilation in blinding heading.
Numerical simulation of ventilation in blinding heading
Institute of Scientific and Technical Information of China (English)
CHANG De-qiang; LIU Jing-xian; CHEN Bao-zhi
2008-01-01
The way of ventilation in all its forms and characteristics in the blinding heading was studied.On the basis of computational fluid dynamics (CFD) the turbulence model of restrained ventilation in blinding heading was set up,and the calculation boundary conditions were analyzed.According to the practice application the three-dimensional flow field of ventilation in blinding heading was simulated by the computational fluid dynamics software.The characteristics of the ventilation flow field such as the temperature field zone and the flow filed zone and the rule of the flow velocity were obtained.The ventilation in blinding heading under certain circumstances was calculated and simulated for optimization.The optimal ventilation form and related parameters under given condition were obtained.The rule of the ventilation in blinding heading was theoretical analyzed,which provided reference for the research on the process of mass transfer,the rule of hazardous substances transportation and ventilation efficiency,provided a new method for the study of reasonable and effective ventilation in blinding heading.
Pierce, R. B.; Johnson, Donald R.; Reames, Fred M.; Zapotocny, Tom H.; Wolf, Bart J.
1991-01-01
The normal-mode characteristics of baroclinically amplifying disturbances were numerically investigated in a series of adiabatic simulations by a hybrid isentropic-sigma model, demonstrating the effect of coupling an isentropic-coordinate free atmospheric domain with a sigma-coordinate PBL on the normal-mode characteristics. Next, the normal-mode model was modified by including a transport equation for water vapor and adiabatic heating by condensation. Simulations with and without a hydrological component showed that the overall effect of latent heat release is to markedly enhance cyclogenesis and frontogenesis.
Numerical Simulations of a Flux Rope Ejection
Indian Academy of Sciences (India)
P. Pagano; D. H. Mackay; S. Poedts
2015-03-01
Coronal mass ejections (CMEs) are the most violent phenomena observed on the Sun. One of the most successful models to explain CMEs is the flux rope ejection model, where a magnetic flux rope is expelled from the solar corona after a long phase along which the flux rope stays in equilibrium while magnetic energy is being accumulated. However, still many questions are outstanding on the detailed mechanism of the ejection and observations continuously provide new data to interpret and put in the context. Currently, extreme ultraviolet (EUV) images from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamic Observatory (SDO) are providing new insights into the early phase of CME evolution. In particular, observations show the ejection of magnetic flux ropes from the solar corona and how they evolve into CMEs. However, these observations are difficult to interpret in terms of basic physical mechanisms and quantities, thus, we need to compare equivalent quantities to test and improve our models. In our work, we intend to bridge the gap between models and observations with our model of flux rope ejection where we consistently describe the full life span of a flux rope from its formation to ejection. This is done by coupling the global non-linear force-free model (GNLFFF) built to describe the slow low- formation phase, with a full MHD simulation run with the software MPI-AMRVAC, suitable to describe the fast MHD evolution of the flux rope ejection that happens in a heterogeneous regime. We also explore the parameter space to identify the conditions upon which the ejection is favoured (gravity stratification and magnetic field intensity) and we produce synthesised AIA observations (171 Å and 211 Å). To carry this out, we run 3D MHD simulation in spherical coordinates where we include the role of thermal conduction and radiative losses, both of which are important for determining the temperature distribution of the solar corona during a CME. Our model of flux
Numerical simulation of supersonic gap flow.
Jing, Xu; Haiming, Huang; Guo, Huang; Song, Mo
2015-01-01
Various gaps in the surface of the supersonic aircraft have a significant effect on airflows. In order to predict the effects of attack angle, Mach number and width-to-depth ratio of gap on the local aerodynamic heating environment of supersonic flow, two-dimensional compressible Navier-Stokes equations are solved by the finite volume method, where convective flux of space term adopts the Roe format, and discretization of time term is achieved by 5-step Runge-Kutta algorithm. The numerical results reveal that the heat flux ratio is U-shaped distribution on the gap wall and maximum at the windward corner of the gap. The heat flux ratio decreases as the gap depth and Mach number increase, however, it increases as the attack angle increases. In addition, it is important to find that chamfer in the windward corner can effectively reduce gap effect coefficient. The study will be helpful for the design of the thermal protection system in reentry vehicles.
Numerical simulation of supersonic gap flow.
Directory of Open Access Journals (Sweden)
Xu Jing
Full Text Available Various gaps in the surface of the supersonic aircraft have a significant effect on airflows. In order to predict the effects of attack angle, Mach number and width-to-depth ratio of gap on the local aerodynamic heating environment of supersonic flow, two-dimensional compressible Navier-Stokes equations are solved by the finite volume method, where convective flux of space term adopts the Roe format, and discretization of time term is achieved by 5-step Runge-Kutta algorithm. The numerical results reveal that the heat flux ratio is U-shaped distribution on the gap wall and maximum at the windward corner of the gap. The heat flux ratio decreases as the gap depth and Mach number increase, however, it increases as the attack angle increases. In addition, it is important to find that chamfer in the windward corner can effectively reduce gap effect coefficient. The study will be helpful for the design of the thermal protection system in reentry vehicles.
AGN feedback in elliptical galaxies: numerical simulations
Ciotti, L
2011-01-01
The importance of feedback (radiative and mechanical) from massive black holes at the centers of elliptical galaxies is not in doubt, given the well established relation among black hole mass and galaxy optical luminosity. Here, with the aid of high-resolution hydrodynamical simulations, we discuss how this feedback affects the hot ISM of isolated elliptical galaxies of different mass. The cooling and heating functions include photoionization plus Compton heating, the radiative transport equations are solved, and the mechanical feedback due to the nuclear wind is also described on a physical basis; star formation is considered. In the medium-high mass galaxies the resulting evolution is highly unsteady. At early times major accretion episodes caused by cooling flows in the recycled gas produced by stellar evolution trigger AGN flaring: relaxation instabilities occur so that duty cycles are small enough to account for the very small fraction of massive ellipticals observed to be in the QSO-phase, when the accr...
Numerical simulation of the world ocean circulation
Takano, K.; Mintz, Y.; Han, Y. J.
1973-01-01
A multi-level model, based on the primitive equations, is developed for simulating the temperature and velocity fields produced in the world ocean by differential heating and surface wind stress. The model ocean has constant depth, free slip at the lower boundary, and neglects momentum advection; so that there is no energy exchange between the barotropic and baroclinic components of the motion, although the former influences the latter through temperature advection. The ocean model was designed to be coupled to the UCLA atmospheric general circulation model, for the study of the dynamics of climate and climate changes. But here, the model is tested by prescribing the observed seasonally varying surface wind stress and the incident solar radiation, the surface air temperature and humidity, cloudiness and the surface wind speed, which, together with the predicted ocean surface temperature, determine the surface flux of radiant energy, sensible heat and latent heat.
Numerical simulation of synthesis gas incineration
Kazakov, A. V.; Khaustov, S. A.; Tabakaev, R. B.; Belousova, Y. A.
2016-04-01
The authors have analysed the expediency of the suggested low-grade fuels application method. Thermal processing of solid raw materials in the gaseous fuel, called synthesis gas, is investigated. The technical challenges concerning the applicability of the existing gas equipment developed and extensively tested exclusively for natural gas were considered. For this purpose computer simulation of three-dimensional syngas-incinerating flame dynamics was performed by means of the ANSYS Multiphysics engineering software. The subjects of studying were: a three-dimensional aerodynamic flame structure, heat-release and temperature fields, a set of combustion properties: a flare range and the concentration distribution of burnout reagents. The obtained results were presented in the form of a time-averaged pathlines with color indexing. The obtained results can be used for qualitative and quantitative evaluation of complex multicomponent gas incineration singularities.
Identification of DVT diseases using numerical simulations.
Simão, M; Ferreira, J M; Mora-Rodriguez, J; Ramos, H M
2016-10-01
This research provides useful insights for better diagnosis and understanding the vein blockage induced by a deep venous thrombosis and the occurrence of reverse flow in human veins, allowing a proper detection of serious diseases related to deep venous insufficiency. An arbitrary Lagrangian-Eulerian formulation is used in a coupled model (i.e. fluid and structure equations solved together), considering two domains, specifically the blood flow and the flexible structures (i.e. vein and valves). Computational fluid dynamics mathematical model based on finite element method, with special elements and boundary characterization, is addressed to find the best solution. This research presents a novel model to study the interaction between non-Newtonian laminar fluid flows, the blood, within nonlinear structures, the vein walls. Simulation results are validated using in vivo echo-Doppler measurements.
Numerical tools for Molten salt reactor simulation
Energy Technology Data Exchange (ETDEWEB)
Doligez, X.; Heuer, D.; Merle-Lucotte, E.; Allibert, M.; Ghetta, V. [LPSC-IN2P3-CNRS/Universite Joseph Fourier/Grenoble-INP, 53 Avenue des Martyrs, 38026 Grenoble Cedex (France)
2009-06-15
Molten salt reactors (MSR) are basically different from other reactors mainly because the fuel is liquid. It flows through the core, pipes, pumps and heat exchangers. Previous studies showed that a particular configuration of a molten salt reactor perfectly fulfils criteria chosen by the Generation 4 International Forum (GIF). This configuration, called non-moderated Thorium Molten Salt Reactor is a 1000 GW electrical thorium cycle based molten salt reactor with no moderator inside the core. Consequently, the neutron spectrum is fast. The reactor is coupled with a salt control unit, which complicates the studies. Reactors simulation is based on resolving Bateman's equations, which give the population of each nucleus inside the core at each moment. Because of MSR's fundamental characteristics, those equations have to be modified adding two terms: a fertile/fissile alimentation for the reactivity and the salt composition control, and the reprocessing associated term. Equations become: {delta}N{sub i}/{delta}t = {sigma}{sub j{ne}}{sub i} {lambda}{sub j{yields}}{sub i} N{sub j} + X{sub j} <{sigma}{sub j}{phi}> N{sub j} - {lambda}{sub i}N{sub i} - <{sigma}{sub i}{phi}> N{sub i} {lambda}{sub chem} N{sub i} + A where {lambda}{sub chem} represents the reprocessing capacities and A represents the fertile/fissile alimentation. All our studies are made with a homemade code, REM, which is a precision driven code for material evolution. Neutron flux and neutron reactions rate are calculated thanks MCNP and the temporal integration is made thanks a Runge-Kutta fourth order method. This code REM, whose calculation scheme will be described in the paper, does not allow a coupling flexible enough between the reprocessing and the core physics. Indeed, reprocessing terms in the previous equation ({lambda}{sub chem}) are set for the whole evolution that can last several hundreds of years. A new way is to drive chemical needs to keep the core critical. Therefore, we are
An efficient algorithm for the stochastic simulation of the hybridization of DNA to microarrays
Directory of Open Access Journals (Sweden)
Laurenzi Ian J
2009-12-01
Full Text Available Abstract Background Although oligonucleotide microarray technology is ubiquitous in genomic research, reproducibility and standardization of expression measurements still concern many researchers. Cross-hybridization between microarray probes and non-target ssDNA has been implicated as a primary factor in sensitivity and selectivity loss. Since hybridization is a chemical process, it may be modeled at a population-level using a combination of material balance equations and thermodynamics. However, the hybridization reaction network may be exceptionally large for commercial arrays, which often possess at least one reporter per transcript. Quantification of the kinetics and equilibrium of exceptionally large chemical systems of this type is numerically infeasible with customary approaches. Results In this paper, we present a robust and computationally efficient algorithm for the simulation of hybridization processes underlying microarray assays. Our method may be utilized to identify the extent to which nucleic acid targets (e.g. cDNA will cross-hybridize with probes, and by extension, characterize probe robustnessusing the information specified by MAGE-TAB. Using this algorithm, we characterize cross-hybridization in a modified commercial microarray assay. Conclusions By integrating stochastic simulation with thermodynamic prediction tools for DNA hybridization, one may robustly and rapidly characterize of the selectivity of a proposed microarray design at the probe and "system" levels. Our code is available at http://www.laurenzi.net.
Hybrid analytic-numeric calculation method for light through a bounded planar dielectric
Nicolau, J.B.; Groesen, van E.
2005-01-01
We present a hybrid analytic-numeric method to calculate the transmission and reflection of light that is fluxed into a bounded complicated optical structure surrounded by air. The solution is obtained by numerical calculations inside a square containing the structure and by analytical calculations
NUMERICAL SIMULATION OF TIP-CLEARANCE FLOW IN CASCADE
Institute of Scientific and Technical Information of China (English)
无
2003-01-01
The tip-clearance flow in a cascade was numerically simulated by solving the RANS equations of incompressible fluids. The computational model was based upon the artificial compressibility formulation proposed by Chorin. The Baldwin-Lomax turbulence model was used to make the governing equations closed. For the specific structure of tip-clearance flow, a multi-block grid structure was adopted to facilitate numerical computations. The comparison of numerical results with experimental data indicates that the present method is capable of simulating tip-clearance flows with satisfactory accuracy.
Batman-cracks. Observations and numerical simulations
Selvadurai, A. P. S.; Busschen, A. Ten; Ernst, L. J.
1991-05-01
To ensure mechanical strength of fiber reinforced plastics (FRP), good adhesion between fibers and the matrix is considered to be an essential requirement. An efficient test of fiber-matrix interface characterization is the fragmentation test which provides information about the interface slip mechanism. This test consists of the longitudinal loading of a single fiber which is embedded in a matrix specimen. At critical loads the fiber experiences fragmentation. This fragmentation will terminate depending upon the shear-slip strength of the fiber-matrix adhesion, which is inversely proportional to average fragment lengths. Depending upon interface strength characteristics either bond or slip matrix fracture can occur at the onset of fiber fracture. Certain particular features of matrix fracture are observed at the locations of fiber fracture in situations where there is sufficient interface bond strength. These refer to the development of fractures with a complex surface topography. The experimental procedure involved in the fragmentation tests is discussed and the boundary element technique to examine the development of multiple matrix fractures at the fiber fracture locations is examined. The mechanics of matrix fracture is examined. When bond integrity is maintained, a fiber fracture results in a matrix fracture. The matrix fracture topography in a fragmentation test is complex; however, simplified conoidal fracture patterns can be used to investigate the crack extension phenomena. Via a mixed-mode fracture criterion, the generation of a conoidal fracture pattern in the matrix is investigated. The numerical results compare favorably with observed experimental data derived from tests conducted on fragmentation test specimens consisting of a single glass fiber which is embedded in a polyester matrix.
Numerical simulation of Glacial Isostatic Adjustment
Miglio, E.
2015-12-01
In the Earth's crust, stress can be subdivided into tectonic background stress, overburden pressure, and pore-fluid pressure. The superposition of the first two and the variation of the third part are key factors in controlling movement along faults. Furthermore, stresses due to sedimentation and erosion contribute to the total stress field. In deglaciated regions, an additional stress must be considered: the rebound stress, which is related to rebounding of the crust and mantle after deglaciation. During the growth of a continental ice sheet, the lithosphere under the iceload is deformed and the removal of the ice load during deglaciation initiates a rebound process. The uplift is well known in formerly glaciated areas, e.g.North America and Scandinavia, and in currently deglaciating areas, e.g.Alaska, Antarctica, and Greenland. The whole process of subsiding and uplifting during the growth and melting of an iceload and all related phenomena is known as glacial isostatic adjustment. During the process of glaciation, the surface of the lithosphere is depressed underneath the ice load and compressional flexural stresses are induced in the upper lithosphere, whereas the bottom of the lithosphere experiences extensional flexural stresses; an additional vertical stress due to the ice load is present and it decreases to zero during deglaciation. During rebound, flexural stresses relax slowly. These stresses are able to change the original stress directions and regime.In this work we aim to study the effect of the GIA process in the context of petroleum engineering. The main aspect we will focus on is the mathematical and numerical modeling of the GIA including thermal effects. We plan also to include a preliminary study of the effect of the glacial erosion. All these phenomena are of paramount importance in petroleum engineering: for example some reservoir have been depleted due to tilting caused by both GIA, erosion and thermal effects.
Energy Technology Data Exchange (ETDEWEB)
Barroso, Dalton Ellery Girao
2006-07-01
It is well known currently that thermonuclear bombs are composed by a containing fission bomb primary module and, in an adjacent region, by a secondary module containing a fission-fusion mixed fuel. The interaction between them is made by the thermal X-rays emitted by the primary fission bomb. These X-rays cause the implosion of the secondary module by ablating its outer surface, and the implosion leads to the detonation of the thermonuclear fuel present in the module. We simulate numerically the secondary module of a modern thermonuclear bomb considering spherical symmetry in its material regions and an instantaneous transfer of the X-rays energy from the primary module to the secondary module. The materials considered in the secondary module, ordering its spherical regions from outside to inside, are the following: an external casing composed by lead, whose role is to confine the radiation from the primary fission bomb, thus avoiding its premature leakage out from the system; a plastic of polystyrene, used to diffuse the radiation inside the easing cavity; an external tamper of natural uranium surrounding the thermonuclear fuel to block the X-rays, which ablate its outer surface and make it to play the fundamental role of the implosion 'pusher'; the thermonuclear fuel composed by lithium-deuterium (LiD) (without initial tritium); and an internal fissile mass of 93% U{sup 235} enriched uranium with a small cover of natural uranium. This internal fissile mass serve as 'spark plug' of the adjacent LiD fuel when it becomes highly supercritical with the implosion of the system and a fission explosion occurs. To accomplish the work, we solved in spherical one-dimensional geometry the radiation-hydrodynamic equations coupled in time to neutron transport equation and to fission-fusion fuel burn equations. The hydrodynamic equations were solved in Lagrangian coordinates and the materials were treated as an ideal dense fluid of free electrons and
Numerical simulations for terrestrial planets formation
Directory of Open Access Journals (Sweden)
Ji J.
2011-07-01
Full Text Available We investigate the formation of terrestrial planets in the late stage of planetary formation using two-planet model. At that time, the protostar has formed for about 3 Myr and the gas disk has dissipated. In the model, the perturbations from Jupiter and Saturn are considered. We also consider variations of the mass of outer planet, and the initial eccentricities and inclinations of embryos and planetesimals. Our results show that, terrestrial planets are formed in 50 Myr, and the accretion rate is about 60%–80%. In each simulation, 3–4 terrestrial planets are formed inside “Jupiter” with masses of 0.15–3.6 M⊕. In the 0.5–4 AU, when the eccentricities of planetesimals are excited, planetesimals are able to accrete material from wide radial direction. The plenty of water material of the terrestrial planet in the Habitable Zone may be transferred from the farther places by this mechanism. Accretion may also happen a few times between two giant planets only if the outer planet has a moderate mass and the small terrestrial planet could survive at some resonances over time scale of 108 yr.
Numerical Simulation of Pulse Shortening in RBWOs
Institute of Scientific and Technical Information of China (English)
GONG Yu-bin; ZHANG Zhang; WANG Wen-xiang; MENG Fan-bao; FAN Zhi-kai; HUANG Min-zhi
2005-01-01
Pulse shortening hinders improvement of microwave output energy for high power microwave tubes. So far, it is also an unresolved problem in the field of high power microwave devices. In this paper, relativistic backward wave tube (RBWO) is treated as an example to study the pulse shortening phenomena. The influences of gas existing in the tube and explosive emission in inner surface of RBWO are all investigated by means of the particle-in-cell method. Through the simulation results, it can be predicted that the background gas in the tube is one but not the most important factor resulting in pulse shortening, in order to broaden the pulse width of gas-filled RBWO, the pressure of the filled gas must be controlled in a proper value. The explosive emission in the surface of slow wave structure due to intense electric field is one of the most important factors causing pulse shortening in high power microwave tube.Some methods to overcome this find of explosive emission are also given.
NUMERICAL SIMULATION OF ICE ACCRETION ON AIRFOIL
Directory of Open Access Journals (Sweden)
Nicusor ALEXANDRESCU
2009-09-01
Full Text Available This work consists in the simulation of the ice accretion in the leading edge of aerodynamic profiles and our proposed model encompasses: geometry generation, calculation of the potential flow around the body, boundary layer thickness computation, water droplet trajectory computation, heat and mass balances and the consequent modification of the geometry by the ice growth. The flow calculation is realized with panel methods, using only segments defined over the body contour. The viscous effects are considered using the Karman-Pohlhausen method for the laminar boundary layer. The local heat transfer coefficient is obtained by applying the Smith-Spalding method for the thermal boundary layer. The ice accretion limits and the collection efficiency are determined by computing water droplet trajectories impinging the surface. The heat transfer process is analyzed with an energy and a mass balance in each segment defining the body. Finally, the geometry is modified by the addition of the computed ice thickness to the respective panel. The process by repeating all the steps. The model validation is done using a selection of problems with experimental solution, CIRA (the CESAR project. Hereinafter, results are obtained for different aerodynamic profiles, angles of attack and meteorological parameters
Numerical simulation of thermocapillary wetting suppression
Chen, Jyh-Chen; Kuo, C.-W.; Neitzel, G. Paul
2002-11-01
The commercial code FIDAP, based on the finite-element method, is used to investigate a nonwetting phenomenon that occurs when a liquid drop is pressed against a solid wall held at a sufficiently lower temperature. In this situation, an interstitial gas film is induced by thermocapillary convection and separates the drop from the wall, forming a self-lubricating system. The flow in both the gas and liquid phases must be computed to simulate the non-wetting phenomenon. We explore the velocity and thermal fields of both the interstitial film and the liquid drop. A steady-state solution is discussed, with many parameters being considered, i.e., drop/wall temperature differences and relative displacement from the point of first apparent contact, as well as varying drop liquids. The results of the present study indicate that a silicone-oil drop may experience nonwetting while a water drop may not. The mechanism promoting the existence or non-existence of the nonwetting state is also discussed.
Numerical simulation of fundamental trapped sausage modes
Cécere, M; Reula, O
2011-01-01
Context: We integrate the 2D MHD ideal equations of a straight slab to simulate observational results associated with fundamental sausage trapped modes. Aims: Starting from a non-equilibrium state with a dense chromospheric layer, we analyse the evolution of the internal plasma dynamics of magnetic loops, subject to line-tying boundary conditions, and with the coronal parameters described in Asai et al. (2001) and Melnikov et al. (2002) to investigate the onset and damping of sausage modes. Methods: To integrate the equations we used a high resolution shock-capturing (HRSC) method specially designed to deal appropriately with flow discontinuities. Results: Due to non-linearities and inhomogeneities, pure modes are difficult to sustain and always occur coupled among them so as to satisfy, e.g., the line-tying constraint. We found that, in one case, the resonant coupling of the sausage fundamental mode with a slow one results in a non-dissipative damping of the former. Conclusions: In scenarios of thick and den...
Numerical simulation of flow past circular duct
Institute of Scientific and Technical Information of China (English)
Ze-gao YIN; Xian-wei Cao; Hong-da SHI; Jian MA
2010-01-01
The Renormalization Group(RNG)k-ε turbulence model and Volume of Fluid(VOF)method were employed to simulate the flow past a circular duct in order to obtain and analyze hydraulic parameters.According to various upper and bottom gap ratios,the force on the duct was calculated.When the bottom gap ratio is 0,the drag force coefficient,lift force coefficient,and composite force reach their maximum values,and the azimuth reaches its minimum.With an increase of the bottom gap ratio from 0 to 1,the drag force coefficient and composite force decrease sharply,and the lift force coefficient does not decreases so much,but the azimuth increases dramatically.With a continuous increase of the bottom gap ratio from 1 upward,the drag force coefficient,lift force coefficient,composite force,and azimuth vary little.Thus,the bottom gap ratio is the key factor influencing the force on the circular duct.When the bottom gap ratio is less than 1,the upper gap ratio has a remarkable influence on the force of the circular duct.When the bottom gap ratio is greater than 1,the variation of the upper gap ratio has little influence on the force of the circular duct.
SKIRT: Hybrid parallelization of radiative transfer simulations
Verstocken, S.; Van De Putte, D.; Camps, P.; Baes, M.
2017-07-01
We describe the design, implementation and performance of the new hybrid parallelization scheme in our Monte Carlo radiative transfer code SKIRT, which has been used extensively for modelling the continuum radiation of dusty astrophysical systems including late-type galaxies and dusty tori. The hybrid scheme combines distributed memory parallelization, using the standard Message Passing Interface (MPI) to communicate between processes, and shared memory parallelization, providing multiple execution threads within each process to avoid duplication of data structures. The synchronization between multiple threads is accomplished through atomic operations without high-level locking (also called lock-free programming). This improves the scaling behaviour of the code and substantially simplifies the implementation of the hybrid scheme. The result is an extremely flexible solution that adjusts to the number of available nodes, processors and memory, and consequently performs well on a wide variety of computing architectures.
Numerical simulation of transient flow in horizontal drainage systems
Institute of Scientific and Technical Information of China (English)
Ze-yu MAO; Han XIAO; Ying LIU; Ying-jun HU
2009-01-01
A numerical simulation model based on the characteristic-based finite-difference method with a time-line interpolation scheme was developed for predicting transient free surface flow in horizontal drainage systems. The fundamental accuracy of the numerical model was first clarified by comparison with the experimental results for a single drainage pipe. Boundary conditions for junctions and bends, which are often encountered in drainage systems, were studied both experimentally and numerically. The numerical model was applied to an actual drainage system. Comparison with a full-scale model experiment indicates that the model can be used to accurately predict flow characteristics in actual drainage networks.
Numerical simulation of photoexcited polaron states in water
Energy Technology Data Exchange (ETDEWEB)
Zemlyanaya, E. V., E-mail: elena@jinr.ru; Volokhova, A. V.; Amirkhanov, I. V.; Puzynin, I. V.; Puzynina, T. P.; Rikhvitskiy, V. S. [Laboratory of Information Technologies, Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation); Lakhno, V. D. [Institute of Mathematical Problems of Biology, Russian Academy of Science, Pushchino 142290 (Russian Federation); Atanasova, P. Kh. [Faculty of Mathematics and Informatics, Paisii Hilendarski University of Plovdiv 4003 (Bulgaria)
2015-10-28
We consider the dynamic polaron model of the hydrated electron state on the basis of a system of three nonlinear partial differential equations with appropriate initial and boundary conditions. A parallel numerical algorithm for the numerical solution of this system has been developed. Its effectiveness has been tested on a few multi-processor systems. A numerical simulation of the polaron states formation in water under the action of the ultraviolet range laser irradiation has been performed. The numerical results are shown to be in a reasonable agreement with experimental data and theoretical predictions.
Numerical Simulation of Hydrodynamic Behaviors of Gravity Cage in Waves
Institute of Scientific and Technical Information of China (English)
ZHAO Yun-peng; LI Yu-cheng; DONG Guo-hai; GUI Fu-kun
2007-01-01
This paper aims at investigation of the dynamic properties of gravity cage exposed to waves by use of a numerical model. The numerical model is developed, based on lumped mass method to set up the equations of motion of the whole cage; meanwhile the solutions of equations are solved by the Runge-Kutta-Verner fifth-order and sixth-order method. Physical model tests have been carried out to examine the validity of the numerical model. The results by the numerical simulation agree well with the experimental data.
Energy Technology Data Exchange (ETDEWEB)
Stroh, Christoph; Schnoerch, Stefan; Rathberger, Christian [Magna Powertrain Engineering Center Steyr GmbH und Co. KG, St. Valentin (Austria)
2012-11-01
In the past few years hybrid vehicles have been in the center of automotive engineering efforts, in particular in the field of passenger cars. But hybrid powertrains will also be important for commercial trucks. This focus on hybrid vehicles leads to high demands on thermal management since the additional components in a hybrid vehicle need appropriate cooling or even heating. In the given paper the simulation of a complete cooling system of a hybrid commercial vehicle will be explained. For this virtual examination the commercial 1D thermal management software KULI will be used, a co-simulation with several programs will not be done deliberately. Yet all aspects which are relevant for a global assessment of the thermal management are considered. The main focus is put on the investigation of appropriate concepts for the fluid circuits, including low and high temperature circuits, electric water pumps, etc. Moreover, also a refrigerant circuit with a chiller for active battery cooling will be used, the appropriate control strategy is implemented as well. For simulating transient profiles a simple driving simulation model is included, using road profile, ambient conditions, and various vehicle parameters as input. In addition an engine model is included which enables the investigation of fuel consumption potentials. This simulation model shows how the thermal management of a hybrid vehicle can be investigated with a single program and with reasonable effort. (orig.)
Prediction on rock stratum stability using numerical simulation
Institute of Scientific and Technical Information of China (English)
刘少伟; 张永庆
2003-01-01
Numerical simulation, which is one of the important methods for tectonic simulation, can be successfully applied into the stability analysis of rock stratum in mining engineering. With numerical simulation, the characteristics of stress-deformation field of the area study can be well discovered, the stress concentration regions can be clearly located and the mechanism and effect of the stress concentration can be analyzed. The results of these studies offer fundamental data for evaluation of the rock stability and prediction of the tunnel wall stability in the working area.
Numerical Simulation of Preferential Flow of Contaminants in Soil
Institute of Scientific and Technical Information of China (English)
无
2001-01-01
A simple modeling approach was suggested to simulate preferential transport of water and contaminants in soil.After saturated hydraulic conductivity was interpolated by means of Krige interpolation method or scaling method, and then zoned,the locations where saturated hydraulic conductivity was larger represented regions where preferential flow occurred,because heterogeneity of soil,one of the mechanisms resulting in preferential flow,could be reflected through the difference in saturated hydraulic conductivity.The modeling approach was validated through numerical simulation of contaminant transport in a two-dimensional hypothetical soil profile.The results of the numerical simulation showed that the approach suggested in this study was feasible.
Modane: A Design Support Tool for Numerical Simulation Codes
Directory of Open Access Journals (Sweden)
Lelandais Benoît
2016-07-01
Full Text Available The continual increasing power of supercomputers allows numerical simulation codes to take into account more complex physical phenomena. Therefore, physicists and mathematicians have to implement complex algorithms using cutting edge technologies and integrate them in large simulators. The CEA-DAM has been studying for several years the contribution of UML/MDE technologies in its simulators development cycle. The Modane application is one of the results of this work.
Numerical simulation analysis of Guixi copper flash smelting furnace
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
A numerical simulation analysis for reactions of chalcopyrite and pyrite particles coupled with momentum, heat and mass transfer between the particle and gas in a flash smelting furnace is presented. In the simulation, the equations governing the gas flow are solved numerically by Eular method. The particle phase is introduced into the gas flow by the particle-source-in-cell technique (PSIC). Predictions including the fluid flow field, temperature field, concentration field of gas phase and the tracks of particles have been obtained by the numerical simulation. The visualized results show that the reaction of sulfide particles is almost completed in the upper zone of the shaft within 1.5 m far from the central jet distributor (CJD) type concentrate burner. The simulation results are in good agreement with data obtained from a series of experiments and tests in the plant and the error is less than 2%.
Numerical Simulation of Barotropic Tides around Taiwan
Directory of Open Access Journals (Sweden)
Chih-Kai Hu
2010-01-01
Full Text Available A 1/12°, 2-D barotropic tide model was used to examine the characteristics of barotropic tides and to improve the accuracy of predicting tidal sea levels and currents in the seas around Taiwan. The form ratio suggests that tides are predominantly semidiurnal in the northern reaches of the Taiwan Strait and mixed of diurnal and semidiurnal elsewhere around Taiwan. When the dominant M2 wave enters the Strait from the north, its amplitude is magnified to ~2 m in the middle, and then decreases rapidly toward the south end of the Strait. The predominance of diurnal tides along the southwest to the south coast of Taiwan is attributed to the quasi-resonance of diurnal waves in the South China Sea. The tidal range is small and tidal currents are weak off the east coast of Taiwan. Barotropic tidal energy is mostly dissipated on the shallow banks of the southwestern Strait. Results summarized from sensitivity tests on the bottom drag coefficient (CD and horizontal eddy viscosity (AM indicate that CD = 0.0015 - 0.00175 and AM = 150 m2 s-1 lead to the best model-data fit when compared to the observed tidal sea levels at ten reference tide-gauge stations around Taiwan. The averaged root-mean-squared (RMS differences of the simulated tidal sea level for the six principal constituents of O1, P1, K1, N2, M2, and S2 are significantly reduced to 1.3, 0.7, 2.0, 1.6, 5.1, and 3.1 cm, respectively, compared to that calculated from a 0.5° resolution global tide harmonic constant database, NAO.99b (Matsumoto et al. 2000. The averaged RMS differences of barotropic tidal currents (U, V for O1, K1, M2, and S2 are (0.92, 1.64, (1.17, 0.61, (3.88, 2.37, and (1.52, 1.20 cm s-1. A database of tidal sea levels and current harmonic constants, TWTIDE08, for Q1, O1, P1, K1, J1, OO1, 2N2, μ2, N2, ν2, M2, L2, T2, S2, and K2 is established with this study.
Mazar Atabaki, M.; Nikodinovski, M.; Chenier, P.; Ma, J.; Liu, W.; Kovacevic, R.
2014-07-01
In the present investigation, a numerical finite element model was developed to simulate the hybrid laser arc welding of different aluminum alloys, namely 5××× to 6××× series. The numerical simulation has been considered two double-ellipsoidal heat sources for the gas metal arc welding and laser welding. The offset distance of the metal arc welding and laser showed a significant effect on the molten pool geometry, the heat distribution and penetration depth during the welding process. It was confirmed that when the offset distance is within the critical distance the laser and arc share the molten pool and specific amount of penetration and dilution can be achieved. The models and experiments show that the off-distance between the two heat sources and shoulder width have considerable influence on the penetration depth and appearance of the weld beads. The experiments also indicate that the laser power, arc voltage and type of the filler metal can effectively determine the final properties of the bonds, specifically the bead appearance and microhardness of the joints. The experiments verified the numerical simulation as the thermocouples assist to comprehend the amount of heat distribution on the T-joint coupons. The role of the welding parameters on the mechanism of the hybrid laser welding of the aluminum alloys was also discussed.
Hybrid stochastic simulation of reaction-diffusion systems with slow and fast dynamics
Energy Technology Data Exchange (ETDEWEB)
Strehl, Robert; Ilie, Silvana, E-mail: silvana@ryerson.ca [Department of Mathematics, Ryerson University, Toronto, Ontario M5B 2K3 (Canada)
2015-12-21
In this paper, we present a novel hybrid method to simulate discrete stochastic reaction-diffusion models arising in biochemical signaling pathways. We study moderately stiff systems, for which we can partition each reaction or diffusion channel into either a slow or fast subset, based on its propensity. Numerical approaches missing this distinction are often limited with respect to computational run time or approximation quality. We design an approximate scheme that remedies these pitfalls by using a new blending strategy of the well-established inhomogeneous stochastic simulation algorithm and the tau-leaping simulation method. The advantages of our hybrid simulation algorithm are demonstrated on three benchmarking systems, with special focus on approximation accuracy and efficiency.
Towards Hybrid Overset Grid Simulations of the Launch Environment
Moini-Yekta, Shayan
A hybrid overset grid approach has been developed for the design and analysis of launch vehicles and facilities in the launch environment. The motivation for the hybrid grid methodology is to reduce the turn-around time of computational fluid dynamic simulations and improve the ability to handle complex geometry and flow physics. The LAVA (Launch Ascent and Vehicle Aerodynamics) hybrid overset grid scheme consists of two components: an off-body immersed-boundary Cartesian solver with block-structured adaptive mesh refinement and a near-body unstructured body-fitted solver. Two-way coupling is achieved through overset connectivity between the off-body and near-body grids. This work highlights verification using code-to-code comparisons and validation using experimental data for the individual and hybrid solver. The hybrid overset grid methodology is applied to representative unsteady 2D trench and 3D generic rocket test cases.
Hybrid modeling of spatial continuity for application to numerical inverse problems
Friedel, Michael J.; Iwashita, Fabio
2013-01-01
A novel two-step modeling approach is presented to obtain optimal starting values and geostatistical constraints for numerical inverse problems otherwise characterized by spatially-limited field data. First, a type of unsupervised neural network, called the self-organizing map (SOM), is trained to recognize nonlinear relations among environmental variables (covariates) occurring at various scales. The values of these variables are then estimated at random locations across the model domain by iterative minimization of SOM topographic error vectors. Cross-validation is used to ensure unbiasedness and compute prediction uncertainty for select subsets of the data. Second, analytical functions are fit to experimental variograms derived from original plus resampled SOM estimates producing model variograms. Sequential Gaussian simulation is used to evaluate spatial uncertainty associated with the analytical functions and probable range for constraining variables. The hybrid modeling of spatial continuity is demonstrated using spatially-limited hydrologic measurements at different scales in Brazil: (1) physical soil properties (sand, silt, clay, hydraulic conductivity) in the 42 km2 Vargem de Caldas basin; (2) well yield and electrical conductivity of groundwater in the 132 km2 fractured crystalline aquifer; and (3) specific capacity, hydraulic head, and major ions in a 100,000 km2 transboundary fractured-basalt aquifer. These results illustrate the benefits of exploiting nonlinear relations among sparse and disparate data sets for modeling spatial continuity, but the actual application of these spatial data to improve numerical inverse modeling requires testing.
Development of a hybrid simulation course to reduce central line infections.
Clapper, Timothy
2012-05-01
Clinical educators are continually looking at ways to effectively deliver large amounts of information to their learners. Whether as a part of pre-course work or as a separate phase of training, there are numerous benefits to making information available to learners before conducting sessions that allow the learners to practice the skills. Hybrid courses consist of a mixture of online and on-site instruction and offer a viable option for clinical educators to consider, especially when their intended audience consists of thousands of learners. This article describes the experiences of a medical simulation center and the use of a hybrid curriculum technique to reduce central line infections.
A Novel Software Simulator Model Based on Active Hybrid Architecture
Directory of Open Access Journals (Sweden)
Amr AbdElHamid
2015-01-01
Full Text Available The simulated training is an important issue for any type of missions such as aerial, ground, sea, or even space missions. In this paper, a new flexible aerial simulator based on active hybrid architecture is introduced. The simulator infrastructure is applicable to any type of training missions and research activities. This software-based simulator is tested on aerial missions to prove its applicability within time critical systems. The proposed active hybrid architecture is introduced via using the VB.NET and MATLAB in the same simulation loop. It exploits the remarkable computational power of MATLAB as a backbone aircraft model, and such mathematical model provides realistic dynamics to the trainee. Meanwhile, the Human-Machine Interface (HMI, the mission planning, the hardware interfacing, data logging, and MATLAB interfacing are developed using VB.NET. The proposed simulator is flexible enough to perform navigation and obstacle avoidance training missions. The active hybrid architecture is used during the simulated training, and also through postmission activities (like the generation of signals playback reports for evaluation purposes. The results show the ability of the proposed architecture to fulfill the aerial simulator demands and to provide a flexible infrastructure for different simulated mission requirements. Finally, a comparison with some existing simulators is introduced.
Institute of Scientific and Technical Information of China (English)
无
2001-01-01
This paper presents new weighting functions in grid generation and new discretizing scheme of momentum equations in numerical simulation of river flow. By using the new weighting functions, the curvilinear grid could be concentrated as desired near the assigned points or lines in physical plane. By using the new discretizing scheme, the difficulties caused by movable boundary and dry riverbed can be overcome. As an application, the flow in the Wuhan Section of Yangtze River is simulated. The computational results are in good agreement with the measured results. The new method is applicable to the numerical simulation of 2-D river flow with irregular region and moveable boundary.
A simulation approach to sizing hybrid photovoltaic and wind systems
Anderson, L. A.
1983-12-01
A simulation approach to sizing hybrid photovoltaic and wind systems provides a combination of components to realize zero downtime and minimum initial or life-cycle cost. Using Dayton, OH as a test site for weather data, cost advantages in the neighborhood of four are predicted for a hybrid system with battery storage when compared to a wind-energy-only system for the same electrical load.
Pseudospectral Model for Hybrid PIC Hall-effect Thruster Simulation
2015-07-01
1149. 8Goebel, D. M. and Katz, I., Fundamentals of Electric Propulsion : Ion and Hall Thrusters, John Wiley & Sons, Inc., 2008. 9Martin, R., J.W., K...Bilyeu, D., and Tran, J., “Dynamic Particle Weight Remapping in Hybrid PIC Hall -effect Thruster Simulation,” 34th Int. Electric Propulsion Conf...Paper 3. DATES COVERED (From - To) July 2015-July 2015 4. TITLE AND SUBTITLE Pseudospectral model for hybrid PIC Hall -effect thruster simulationect
Sizing and Simulation of PV-Wind Hybrid Power System
Mustafa Engin
2013-01-01
A sizing procedure is developed for hybrid system with the aid of mathematical models for photovoltaic cell, wind turbine, and battery that are readily present in the literature. This sizing procedure can simulate the annual performance of different kinds of photovoltaic-wind hybrid power system structures for an identified set of renewable resources, which fulfills technical limitations with the lowest energy cost. The output of the program will display the performance of the system during t...
Distributed Heterogeneous Simulation of a Hybrid-Electric Vehicle
2006-03-29
operate as a generator to convert mechanical energy from the diesel t~nginc 01 from regenerative braking to electrical energy. A vehicle control module...Distributed Heterogeneous Simulation of a Hybrid- Electric Vehicle Ning Wu’, Curtis Rands t , Charles E. Lucas!, Eric A. Walters§, and Maher A...Masrurit US Army RDECOM-TARDEC, Warren, MI, 48397 Hybrid- electric military vehicles provide many advantages over conventional military vehicles powered
Sint Annaland, van M.; Deen, N.G.; Kuipers, J.A.M.
2005-01-01
In this paper a hybrid model is presented for the numerical simulation of gas¿liquid¿solid flows using a combined front tracking (FT) and discrete particle (DP) approach applied for, respectively, dispersed gas bubbles and solid particles present in the continuous liquid phase. The hard sphere DP mo
Quasi-Static Single-Component Hybrid Simulation of a Composite Structure with Multi-Axis Control
DEFF Research Database (Denmark)
Høgh, J.; Waldbjørn, J.; Wittrup-Schmidt, J.
2015-01-01
This paper presents a quasi-static hybrid simulation performed on a single component structure. Hybrid simulation is a substructural technique, where a structure is divided into two sections: a numerical section of the main structure and a physical experiment of the remainder. In previous cases...... to evaluate the validity of the method, the results are compared to a test of the emulated structure – referred to here as the reference test. It was found that the error introduced by compliance in the load train was signiﬁcant. Digital image correlation was for this reason implemented in the hybrid...
Baurle, R. A.
2015-01-01
Steady-state and scale-resolving simulations have been performed for flow in and around a model scramjet combustor flameholder. The cases simulated corresponded to those used to examine this flowfield experimentally using particle image velocimetry. A variety of turbulence models were used for the steady-state Reynolds-averaged simulations which included both linear and non-linear eddy viscosity models. The scale-resolving simulations used a hybrid Reynolds-averaged / large eddy simulation strategy that is designed to be a large eddy simulation everywhere except in the inner portion (log layer and below) of the boundary layer. Hence, this formulation can be regarded as a wall-modeled large eddy simulation. This effort was undertaken to formally assess the performance of the hybrid Reynolds-averaged / large eddy simulation modeling approach in a flowfield of interest to the scramjet research community. The numerical errors were quantified for both the steady-state and scale-resolving simulations prior to making any claims of predictive accuracy relative to the measurements. The steady-state Reynolds-averaged results showed a high degree of variability when comparing the predictions obtained from each turbulence model, with the non-linear eddy viscosity model (an explicit algebraic stress model) providing the most accurate prediction of the measured values. The hybrid Reynolds-averaged/large eddy simulation results were carefully scrutinized to ensure that even the coarsest grid had an acceptable level of resolution for large eddy simulation, and that the time-averaged statistics were acceptably accurate. The autocorrelation and its Fourier transform were the primary tools used for this assessment. The statistics extracted from the hybrid simulation strategy proved to be more accurate than the Reynolds-averaged results obtained using the linear eddy viscosity models. However, there was no predictive improvement noted over the results obtained from the explicit
Numerical Simulation of the 12 May 1997 CME Event
Institute of Scientific and Technical Information of China (English)
ZHOU Yu-Fen; FENG Xue-Shang; Wu S.T
2008-01-01
Our newly developed CESE MHD model is used to simulate sun-earth connection event with the well-studied 12 May 1997 CME event as an example.The main features and approximations of our numerical model are as follows:(1)The modified conservation element and solution element(CESE)numerical scheme in spherical geometry is implemented in our code.(2)The background solar wind is derived from a 3D time-dependent numerical MHD model by input measured photospheric magnetic fields.(3)Transient disturbances are derived from solar surface by introducing a mass flow of hot plasma.The numerical simulation has enabled us to predict the arrival of the interplanetary shock and provided us with a relatively satisfactory comparison with the WIND spacecraft observations.
Reduction Methods for Real-time Simulations in Hybrid Testing
DEFF Research Database (Denmark)
Andersen, Sebastian
2016-01-01
Hybrid testing constitutes a cost-effective experimental full scale testing method. The method was introduced in the 1960's by Japanese researchers, as an alternative to conventional full scale testing and small scale material testing, such as shake table tests. The principle of the method...... is to divide a structure into a physical substructure and a numerical substructure, and couple these in a test. If the test is conducted in real-time it is referred to as real time hybrid testing. The hybrid testing concept has developed significantly since its introduction in the 1960', both with respect...... without introducing further unknowns into the system. The basis formulation is shown to exhibit high precision and to reduce the computational cost significantly. Furthermore, the basis formulation exhibits a significant higher stability, than standard nonlinear algorithms. A real-time hybrid test...
Efficient parabolic evaluation of coupling terms in hybrid quantum/classical simulations
Energy Technology Data Exchange (ETDEWEB)
Bastida, Adolfo, E-mail: bastida@um.es [Departamento de Quimica Fisica, Facultad de Quimica, Universidad de Murcia, 30100 Murcia (Spain); Soler, Miguel Angel; Zuniga, Jose; Requena, Alberto [Departamento de Quimica Fisica, Facultad de Quimica, Universidad de Murcia, 30100 Murcia (Spain); Miguel, Beatriz [Departamento de Ingenieria Quimica y Ambiental, Universidad Politecnica de Cartagena, 30203 Cartagena (Spain)
2009-03-30
A parabolic interpolation function of time is proposed to evaluate the non-adiabatic coupling matrix elements and the adiabatic energies at intermediate times within the classical time integration interval in hybrid quantum/classical simulations. The accuracy and the computational efficiency of this parabolic approximation are illustrated by carrying out a numerical application to the well-studied vibrational relaxation of I{sub 2} in liquid xenon.
Large-scale numerical simulation of rotationally constrained convection
Sprague, Michael; Julien, Keith; Knobloch, Edgar; Werne, Joseph; Weiss, Jeffrey
2007-11-01
Using direct numerical simulation (DNS), we investigate solutions of an asymptotically reduced system of nonlinear PDEs for rotationally constrained convection. The reduced equations filter fast inertial waves and relax the need to resolve Ekman boundary layers, which allow exploration of a parameter range inaccessible with DNS of the full Boussinesq equations. The equations are applicable to ocean deep convection, which is characterized by small Rossby number and large Rayleigh number. Previous numerical studies of the reduced equations examined upright convection where the gravity vector was anti-parallel to the rotation vector. In addition to the columnar and geostrophic-turbulence regimes, simulations revealed a third regime where Taylor columns were shielded by sleeves of opposite-signed vorticity. We here extend our numerical simulations to examine both upright and tilted convection at high Rayleigh numbers.
Numerical simulation of a laser-acoustic landmine detection system
Lancranjan, Ion I.; Miclos, Sorin; Savastru, Dan; Savastru, Roxana; Opran, Constantin
2012-06-01
The preliminary numerical simulation results obtained in the analysis of a landmine detection system based on laser excitation of acoustic - seismic waves in the soil and observing its surface vibration above the embedded landmine are presented. The presented numerical simulations comprise three main parts: 1) Laser oscillator and laser beam propagation and absorption in soil; a laser oscillator operated in Q-switched regime is considered; different laser wavelengths are investigated. 2) Acoustic - seismic wave generation by absorption in soil of laser pulse energy; 3) Evaluation of acoustic - seismic wave generation by the buried in soil landmine; 4) Comparison of Distributed Feed- Back Fiber Laser (DFB-FL) and Laser Doppler Vibrometer (LDV) detector used for soil vibrations evaluation. The above mentioned numerical simulation is dedicated for evaluation of an integrated portable detection system.
FSW Numerical Simulation of Aluminium Plates by SYSWELD - Part II
Directory of Open Access Journals (Sweden)
Jančo Roland
2016-11-01
Full Text Available Friction Stir Welding (FSW is one of the most effective solid state joining processes and has numerous potential applications in many industries. The simulation process can provide the evolution of physicals quantities such as temperature, metallurgical phase proportions, stress and strain which can be easily measured during welding. The numerical modelling requires the modelling of the complex interaction between thermal, metallurgical and mechanical phenomena. The aim of this paper is to describe the thermal-fluid simulation of FSW using the finite element method. In the theoretical part of paper heating is provided by the material flow and contact condition between the tool and the welded material. Thermal-mechanical results from the numerical simulation using SYSWELD are also presented for aluminium alloy.
FSW Numerical Simulation of Aluminium Plates by Sysweld - Part I
Directory of Open Access Journals (Sweden)
Jančo Roland
2016-07-01
Full Text Available Friction Stir Welding (FSW is one of the most effective solid state joining processes and it has numerous potential applications in many industries. The simulation process can provide the evolution of physical quantities such as temperature, metallurgical phase proportions, stress and strain which can be easily measured during welding. The numerical modelling requires the modelling of a complex interaction between thermal, metallurgical and mechanical phenomena. The aim of this paper is to describe the thermal-fluid simulation of FSW using the finite element method. In the theoretical part of the paper heating is provided by the material flow and contact condition between the tool and the welded material. The thermal-fluid results from the numerical simulation for aluminium alloy using SYSWELD are also presented in this paper.
Bellos, Vasilis; Tsakiris, George
2016-09-01
The study presents a new hybrid method for the simulation of flood events in small catchments. It combines a physically-based two-dimensional hydrodynamic model and the hydrological unit hydrograph theory. Unit hydrographs are derived using the FLOW-R2D model which is based on the full form of two-dimensional Shallow Water Equations, solved by a modified McCormack numerical scheme. The method is tested at a small catchment in a suburb of Athens-Greece for a storm event which occurred in February 2013. The catchment is divided into three friction zones and unit hydrographs of 15 and 30 min are produced. The infiltration process is simulated by the empirical Kostiakov equation and the Green-Ampt model. The results from the implementation of the proposed hybrid method are compared with recorded data at the hydrometric station at the outlet of the catchment and the results derived from the fully hydrodynamic model FLOW-R2D. It is concluded that for the case studied, the proposed hybrid method produces results close to those of the fully hydrodynamic simulation at substantially shorter computational time. This finding, if further verified in a variety of case studies, can be useful in devising effective hybrid tools for the two-dimensional flood simulations, which are lead to accurate and considerably faster results than those achieved by the fully hydrodynamic simulations.
Numerical simulation of landslide-generated impulse wave
Institute of Scientific and Technical Information of China (English)
赵兰浩; 毛佳; 刘晓青; 李同春
2014-01-01
A numerical model is proposed for the simulation of impulse waves generated by landslides. The fluid-like landslide is modeled as a generalized non-Newtonian visco-plastic fluid. The conservative level set method is extended to the n-phase flow and applied to capture the interfaces of air, water and landslide. Numerical results show an excellent performance of the current model to capture the whole process of the landslide and the impulse wave generation.
Numerical Simulation of Large Diameter Cylindrical Structure Slamming
Institute of Scientific and Technical Information of China (English)
XU Jing; WANG De-yu
2008-01-01
The water entry of large diameter cylindrical structure is studied by applying numerical simulation method. The processes of different diameter cylindrical structures impacting water with various constant velocities are calculated numerically. Thereafter, analyzed are the distribution of slamming pressure on structure during slamming course and the influence of slamming velocity and cylindrical diameter on slamming process. Furthermore, presented herein is an equation being used to forecast the peak slamming force on a large diameter cylindrical structure.
FSW Numerical Simulation of Aluminium Plates by Sysweld - Part I
Jančo Roland; Écsi Ladislav; Élesztős Pavel
2016-01-01
Friction Stir Welding (FSW) is one of the most effective solid state joining processes and it has numerous potential applications in many industries. The simulation process can provide the evolution of physical quantities such as temperature, metallurgical phase proportions, stress and strain which can be easily measured during welding. The numerical modelling requires the modelling of a complex interaction between thermal, metallurgical and mechanical phenomena. The aim of this paper is to d...
FSW Numerical Simulation of Aluminium Plates by SYSWELD - Part II
Jančo Roland; Écsi Ladislav; Élesztős Pavel
2016-01-01
Friction Stir Welding (FSW) is one of the most effective solid state joining processes and has numerous potential applications in many industries. The simulation process can provide the evolution of physicals quantities such as temperature, metallurgical phase proportions, stress and strain which can be easily measured during welding. The numerical modelling requires the modelling of the complex interaction between thermal, metallurgical and mechanical phenomena. The aim of this paper is to d...
Hybrid Particle-Continuum Numerical Methods for Aerospace Applications
2011-01-01
Numerical Methods for Aerospace Applications 6 - 2 RTO-EN-AVT-194 2.1 Micro-Scale Flows Recently, an increase in the development of micro- and nano ...equations predict a separation bubble that forms along the surface that is signicantly larger than experimental measurements. In general, DSMC...and Rockets, Vol. 31, No. 6, 1994, pp. 971979. [3] McNeely, M., Microturbine Designed for Mechanical Drive Applications, Diesel Progress North
Numerical simulation of super-square patterns in Faraday waves
Kahouadji, L; Tuckerman, L S; Shin, S; Chergui, J; Juric, D
2015-01-01
We report the first simulations of the Faraday instability using the full three-dimensional Navier-Stokes equations in domains much larger than the characteristic wavelength of the pattern. We use a massively parallel code based on a hybrid Front-Tracking/Level-set algorithm for Lagrangian tracking of arbitrarily deformable phase interfaces. Simulations performed in rectangular and cylindrical domains yield complex patterns. In particular, a superlattice-like pattern similar to those of [Douady & Fauve, Europhys. Lett. 6, 221-226 (1988); Douady, J. Fluid Mech. 221, 383-409 (1990)] is observed. The pattern consists of the superposition of two square superlattices.
Numerical simulation of transition in wall-bounded shear flows
Kleiser, Leonhard; Zang, Thomas A.
1991-01-01
The current status of numerical simulation techniques for the transition to turbulence in incompressible channel and boundary-layer flows is surveyed, and typical results are presented graphically. The focus is on direct numerical simulations based on the full nonlinear time-dependent Navier-Stokes equations without empirical closure assumptions for prescribed initial and boundary conditions. Topics addressed include the vibrating ribbon problem, space and time discretization, initial and boundary conditions, alternative methods based on the triple-deck approximation, two-dimensional channel and boundary-layer flows, three-dimensional boundary layers, wave packets and turbulent spots, compressible flows, transition control, and transition modeling.
Numerical simulation of wall-bounded turbulent shear flows
Moin, P.
1982-01-01
Developments in three dimensional, time dependent numerical simulation of turbulent flows bounded by a wall are reviewed. Both direct and large eddy simulation techniques are considered within the same computational framework. The computational spatial grid requirements as dictated by the known structure of turbulent boundary layers are presented. The numerical methods currently in use are reviewed and some of the features of these algorithms, including spatial differencing and accuracy, time advancement, and data management are discussed. A selection of the results of the recent calculations of turbulent channel flow, including the effects of system rotation and transpiration on the flow are included.
NUMERICAL SIMULATION FOR FORMED PROJECTILE OF DEPLETED URANIUM ALLOY
Institute of Scientific and Technical Information of China (English)
宋顺成; 高平; 才鸿年
2003-01-01
The numerical simulation for forming projectile of depleted uranium alloy with the SPH ( Smooth Particle Hydrodynamic ) algorithm was presented. In the computations the artificial pressures of detonation were used, i. e. , the spatial distribution and time distribution were given artificially. To describe the deformed behaviors of the depleted uranium alloy under high pressure and high strain rate, the Johnson-Cook model of materials was introduced. From the numerical simulation the formed projectile velocity,projectile geometry and the minimum of the height of detonation are obtained.
Preface to advances in numerical simulation of plasmas
Parker, Scott E.; Chacon, Luis
2016-10-01
This Journal of Computational Physics Special Issue, titled "Advances in Numerical Simulation of Plasmas," presents a snapshot of the international state of the art in the field of computational plasma physics. The articles herein are a subset of the topics presented as invited talks at the 24th International Conference on the Numerical Simulation of Plasmas (ICNSP), August 12-14, 2015 in Golden, Colorado. The choice of papers was highly selective. The ICNSP is held every other year and is the premier scientific meeting in the field of computational plasma physics.
Numerical Simulations of a Possible Hypercomputational Quantum Algorithm
Sicard, A; Vélez, M; Sicard, Andr\\'es; Ospina, Juan; V\\'elez, Mario
2005-01-01
The hypercomputers compute functions or numbers, or more generally solve problems or carry out tasks, that cannot be computed or solved by a Turing machine. Several numerical simulations of a possible hypercomputational algorithm based on quantum computations previously constructed by the authors are presented. The hypercomputability of our algorithm is based on the fact that this algorithm could solve a classically non-computable decision problem, Hilbert's tenth problem. The numerical simulations were realized for three types of Diophantine equations: with and without solutions in non-negative integers, and without solutions by way of various traditional mathematical packages.
Numerical Simulation of Two-dimensional Nonlinear Sloshing Problems
Institute of Scientific and Technical Information of China (English)
无
2005-01-01
Numerical simulation of a two-dimensional nonlinearsloshing problem is preceded by the finite element method. Two theories are used. One is fully nonlinear theory; the other is time domain second order theory. A liquid sloshing in a rectangular container subjected to a horizontal excitation is simulated using these two theories. Numerical results are obtained and comparisons are made. It is found that a good agreement is obtained for the case of small amplitude oscillation. For the situation of large amplitude excitation, although the differences between using the two theories are obvious the second order solution can still exhibit typical nonlinear features of nonlinear wave.
NUMERICAL SIMULATION OF SHOCK WAVE REFRACTION ON INCLINED CONTACT DISCONTINUITY
Directory of Open Access Journals (Sweden)
P. V. Bulat
2016-05-01
Full Text Available We consider numerical simulation of shock wave refraction on plane contact discontinuity, separating two gases with different density. Discretization of Euler equations is based on finite volume method and WENO finite difference schemes, implemented on unstructured meshes. Integration over time is performed with the use of the third-order Runge–Kutta stepping procedure. The procedure of identification and classification of gas dynamic discontinuities based on conditions of dynamic consistency and image processing methods is applied to visualize and interpret the results of numerical calculations. The flow structure and its quantitative characteristics are defined. The results of numerical and experimental visualization (shadowgraphs, schlieren images, and interferograms are compared.
Further validation of the hybrid particle-mesh method for vortex shedding flow simulations
Directory of Open Access Journals (Sweden)
Lee Seung-Jae
2015-11-01
Full Text Available This is the continuation of a numerical study on vortex shedding from a blunt trailing-edge of a hydrofoil. In our previous work (Lee et al., 2015, numerical schemes for efficient computations were successfully implemented; i.e. multiple domains, the approximation of domain boundary conditions using cubic spline functions, and particle-based domain decomposition for better load balancing. In this study, numerical results through a hybrid particle-mesh method which adopts the Vortex-In-Cell (VIC method and the Brinkman penalization model are further rigorously validated through comparison to experimental data at the Reynolds number of 2 × 106. The effects of changes in numerical parameters are also explored herein. We find that the present numerical method enables us to reasonably simulate vortex shedding phenomenon, as well as turbulent wakes of a hydrofoil.
Processing biobased polymers using plasticizers: Numerical simulations versus experiments
Desplentere, Frederik; Cardon, Ludwig; Six, Wim; Erkoç, Mustafa
2016-03-01
In polymer processing, the use of biobased products shows lots of possibilities. Considering biobased materials, biodegradability is in most cases the most important issue. Next to this, bio based materials aimed at durable applications, are gaining interest. Within this research, the influence of plasticizers on the processing of the bio based material is investigated. This work is done for an extrusion grade of PLA, Natureworks PLA 2003D. Extrusion through a slit die equipped with pressure sensors is used to compare the experimental pressure values to numerical simulation results. Additional experimental data (temperature and pressure data along the extrusion screw and die are recorded) is generated on a dr. Collin Lab extruder producing a 25mm diameter tube. All these experimental data is used to indicate the appropriate functioning of the numerical simulation tool Virtual Extrusion Laboratory 6.7 for the simulation of both the industrial available extrusion grade PLA and the compound in which 15% of plasticizer is added. Adding the applied plasticizer, resulted in a 40% lower pressure drop over the extrusion die. The combination of different experiments allowed to fit the numerical simulation results closely to the experimental values. Based on this experience, it is shown that numerical simulations also can be used for modified bio based materials if appropriate material and process data are taken into account.
Numerical simulations and mathematical models of flows in complex geometries
DEFF Research Database (Denmark)
Hernandez Garcia, Anier
The research work of the present thesis was mainly aimed at exploiting one of the strengths of the Lattice Boltzmann methods, namely, the ability to handle complicated geometries to accurately simulate flows in complex geometries. In this thesis, we perform a very detailed theoretical analysis...... and through the Chapman-Enskog multi-scale expansion technique the dependence of the kinetic viscosity on each scheme is investigated. Seeking for optimal numerical schemes to eciently simulate a wide range of complex flows a variant of the finite element, off-lattice Boltzmann method [5], which uses...... the characteristic based integration is also implemented. Using the latter scheme, numerical simulations are conducted in flows of different complexities: flow in a (real) porous network and turbulent flows in ducts with wall irregularities. From the simulations of flows in porous media driven by pressure gradients...
NUMERICAL PREDICTION OF SUBMARINE HYDRODYNAMIC COEFFICIENTS USING CFD SIMULATION
Institute of Scientific and Technical Information of China (English)
PAN Yu-cun; ZHANG Huai-xin; ZHOU Qi-dou
2012-01-01
The submarine Hydrodynamic coefficients are predicted by numerical simulations.Steady and unsteady Reynolds Averaged Navier-Stokes (RANS) simulations are carried out to numerically simulate the oblique towing experiment and the Planar Motion Mechanism (PMM) experiment performed on the SUBOFF submarine model.The dynamic mesh method is adopted to simulate the maneuvering motions of pure heaving,pure swaying,pure pitching and pure yawing.The hydrodynamic forces and moments acting on the maneuvering submarine are obtained.Consequently,by analyzing these results,the hydrodynamic coefficients of the submarine maneuvering motions can be determined.The computational results are verified by comparison with experimental data,which show that this method can be used to estimate the hydrodynamic derivatives of a fully appended submarine.
3D numerical simulation of transient processes in hydraulic turbines
Energy Technology Data Exchange (ETDEWEB)
Cherny, S; Chirkov, D; Lapin, V; Eshkunova, I [Institute of Computational Technologies SB RAS Acad. Lavrentjev avenue 6, Novosibirsk, 630090 (Russian Federation); Bannikov, D; Avdushenko, A [Department of Mechanics and Mathematics, Novosibirsk State University Pirogov st. 2, Novosibirsk, 630090 (Russian Federation); Skorospelov, V, E-mail: chirkov@ict.nsc.r [Institute of Mathematics SB RAS Acad. Koptug avenue 4, Novosibirsk, 630090 (Russian Federation)
2010-08-15
An approach for numerical simulation of 3D hydraulic turbine flows in transient operating regimes is presented. The method is based on a coupled solution of incompressible RANS equations, runner rotation equation, and water hammer equations. The issue of setting appropriate boundary conditions is considered in detail. As an illustration, the simulation results for runaway process are presented. The evolution of vortex structure and its effect on computed runaway traces are analyzed.
3D numerical simulation of transient processes in hydraulic turbines
Cherny, S.; Chirkov, D.; Bannikov, D.; Lapin, V.; Skorospelov, V.; Eshkunova, I.; Avdushenko, A.
2010-08-01
An approach for numerical simulation of 3D hydraulic turbine flows in transient operating regimes is presented. The method is based on a coupled solution of incompressible RANS equations, runner rotation equation, and water hammer equations. The issue of setting appropriate boundary conditions is considered in detail. As an illustration, the simulation results for runaway process are presented. The evolution of vortex structure and its effect on computed runaway traces are analyzed.
APPLICATION OF NUMERICAL SIMULATION TO STUDY ON THERMAL CONDUCTION
Institute of Scientific and Technical Information of China (English)
C. Zhu; Z. Xu; D.E. Wu
2004-01-01
In this paper, using computer simulation and mathematic experiment method to solve the simplified one dimensional thermal conduction equation and to obtain the temperature distribution in a metal bar when its one end was heated. According to principle of hot expansion, a holograph of temperature distribution in the bar by laser holotechnique was taken. The results of numerical simulation and experiments are in good agreement and a new method for study on thermal conduction by laser holo-technique was found.
Numerical simulation of circular jet impinging on hot steel plate
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
Flow structure and heat transfer characteristics of an axisymmetric circular jet impinging on a hot 1Cr18Ni9Ti medium plate have been simulated numerically using computational fluid dynamic (CFD) code. The relation between flow field of jet impingement and its heat transfer capability is analyzed, and the phenomenon that heat transfer at stagnation point is smaller than that of points directly around is discussed. The simulation result provides boundary conditions for thermalanalysis of medium plate quenching.
Numerical Simulation of Friction Stir Welding by Natural Element Methods
Alfaro, I.; Fratini, L.; CUETO, Elias; Chinesta, Francisco
2009-01-01
International audience; In this work we address the problem of numerically simulating the Friction Stir Welding process. Due to the special characteristics of this welding method (i.e., high speed of the rotating pin, very large deformations, etc.) finite element methods (FEM) encounter several difficulties. While Lagrangian simulations suffer from mesh distortion, Eulerian or Arbitrary Lagrangian Eulerian (ALE) ones still have difficulties due to the treatment of convective terms, the treatm...
Initiation Style Optimization of Aimed Warhead by Numerical Simulation
Institute of Scientific and Technical Information of China (English)
WEI Ji-feng; LI Na; WEN Yu-quan; WANG Wen-jie
2008-01-01
The kill characteristics of aimed warhead were studied.Emphasis on the improvement of initiation system,experiments and three dimensional numerical investigations were carried out.Simulation results of side three initiation points fit experiments well.Optimal initiation style is obtained through further simulation.It shows that the effective fragments and the effective kill energy of the optimal scheme increase 12.8%and 10.1%respectively.
Energy Technology Data Exchange (ETDEWEB)
Winke, Florian; Bargende, Michael [Stuttgart Univ. (Germany). Inst. fuer Verbrennungsmotoren und Kraftfahrwesen (IVK)
2013-09-15
As a result of the rising requirements on the development process of modern vehicles, simulation models for the prediction of fuel efficiency have become an irreplaceable tool in the automotive industry. Especially for the design of hybrid electric drivetrains, the increasingly short development cycles can only be met by the use of efficient simulation models. At the IVK of the University of Stuttgart, different approaches to simulating the longitudinal dynamics of hybrid electric vehicles were analysed and compared within the presented project. The focus of the investigations was on urban operation. The objective was to develop a hybrid vehicle concept that allows an equitable comparison with pure battery electric vehicles. (orig.)
The hybrid Eulerian Lagrangian numerical scheme tested with Chemistry
Directory of Open Access Journals (Sweden)
A. B. Hansen
2012-11-01
Full Text Available A newly developed advection scheme, the Hybrid Eulerian Lagrangian (HEL scheme, has been tested, including a module for atmospheric chemistry, including 58 chemical species, and compared to two other traditional advection schemes; a classical pseudospectral Eulerian method the Accurate Space Derivative (ASD scheme and the bi-cubic semi-Lagrangian (SL scheme using classical rotation tests. The rotation tests have been designed to test and compare the advection schemes for different spatial and temporal resolutions in different chemical conditions (rural and urban and for different shapes (cone and slotted cylinder giving the advection schemes different challenges with respect to relatively slow or fast chemistry and smooth or sharp gradients, respectively. In every test, error measures have been calculated and used for ranking of the advection schemes with respect to performance, i.e. lowest overall errors for all chemical species. Furthermore, the HEL and SL schemes have been compared in a shallow water model, demonstrating the performance in a more realistic non-linear deformation flow.
The results in this paper show that the new advection scheme, HEL, by far outperforms both the Eulerian and semi-Lagrangian schemes with very low error estimates compared to the two other schemes. Although no analytic solution can be obtained for the performance in the non-linear shallow water model flow, the tracer distribution appears realistic as compared to LMCSL when a mixing between local parcel concentrations is introduced in HEL.
Hybrid Multilevel Monte Carlo Simulation of Stochastic Reaction Networks
Moraes, Alvaro
2015-01-07
Stochastic reaction networks (SRNs) is a class of continuous-time Markov chains intended to describe, from the kinetic point of view, the time-evolution of chemical systems in which molecules of different chemical species undergo a finite set of reaction channels. This talk is based on articles [4, 5, 6], where we are interested in the following problem: given a SRN, X, defined though its set of reaction channels, and its initial state, x0, estimate E (g(X(T))); that is, the expected value of a scalar observable, g, of the process, X, at a fixed time, T. This problem lead us to define a series of Monte Carlo estimators, M, such that, with high probability can produce values close to the quantity of interest, E (g(X(T))). More specifically, given a user-selected tolerance, TOL, and a small confidence level, η, find an estimator, M, based on approximate sampled paths of X, such that, P (|E (g(X(T))) − M| ≤ TOL) ≥ 1 − η; even more, we want to achieve this objective with near optimal computational work. We first introduce a hybrid path-simulation scheme based on the well-known stochastic simulation algorithm (SSA)[3] and the tau-leap method [2]. Then, we introduce a Multilevel Monte Carlo strategy that allows us to achieve a computational complexity of order O(T OL−2), this is the same computational complexity as in an exact method but with a smaller constant. We provide numerical examples to show our results.
Energy Technology Data Exchange (ETDEWEB)
Balaven-Clermidy, S.
2001-12-01
Oil reservoir simulations study multiphase flows in porous media. These flows are described and evaluated through numerical schemes on a discretization of the reservoir domain. In this thesis, we were interested in this spatial discretization and a new kind of hybrid mesh has been proposed where the radial nature of flows in the vicinity of wells is directly taken into account in the geometry. Our modular approach described wells and their drainage area through radial circular meshes. These well meshes are inserted in a structured reservoir mesh (a Corner Point Geometry mesh) made up with hexahedral cells. Finally, in order to generate a global conforming mesh, proper connections are realized between the different kinds of meshes through unstructured transition ones. To compute these transition meshes that we want acceptable in terms of finite volume methods, an automatic method based on power diagrams has been developed. Our approach can deal with a homogeneous anisotropic medium and allows the user to insert vertical or horizontal wells as well as secondary faults in the reservoir mesh. Our work has been implemented, tested and validated in 2D and 2D1/2. It can also be extended in 3D when the geometrical constraints are simplicial ones: points, segments and triangles. (author)
Hybrid method for numerical modelling of LWR coolant chemistry
Swiatla-Wojcik, Dorota
2016-10-01
A comprehensive approach is proposed to model radiation chemistry of the cooling water under exposure to neutron and gamma radiation at 300 °C. It covers diffusion-kinetic processes in radiation tracks and secondary reactions in the bulk coolant. Steady-state concentrations of the radiolytic products have been assessed based on the simulated time dependent concentration profiles. The principal reactions contributing to the formation of H2, O2 and H2O2 were indicated. Simulation was carried out depending on the amount of extra hydrogen dissolved in the coolant to reduce concentration of corrosive agents. High sensitivity to the rate of reaction H+H2O=OH+H2 is shown and discussed.
FEM and FVM compound numerical simulation of aluminum extrusion processes
Institute of Scientific and Technical Information of China (English)
周飞; 苏丹; 彭颖红; 阮雪榆
2003-01-01
The finite element method (FEM) and the finite volume method (FVM) numerical simulation methods have been widely used in forging industries to improve the quality of products and reduce the costs. Because of very concentrative large deformation during the aluminum extrusion processes, it is very difficult to simulate the whole forming process only by using either FEM or FVM. In order to solve this problem, an FEM and FVM compound simulation method was proposed. The theoretical equations of the compound simulation method were given and the key techniques were studied. Then, the configuration of the compound simulation system was established. The tube extrusion process was simulated successfully so as to prove the validity of this approach for aluminum extrusion processes.
Continuous limit of a crowd motion and herding model: Analysis and numerical simulations
Pietschmann, Jan-Frederik
2011-11-01
In this paper we study the continuum limit of a cellular automaton model used for simulating human crowds with herding behaviour. We derive a system of non-linear partial differential equations resembling the Keller-Segel model for chemotaxis, however with a non-monotone interaction. The latter has interesting consequences on the behaviour of the model\\'s solutions, which we highlight in its analysis. In particular we study the possibility of stationary states, the formation of clusters and explore their connection to congestion. We also introduce an efficient numerical simulation approach based on an appropriate hybrid discontinuous Galerkin method, which in particular allows flexible treatment of complicated geometries. Extensive numerical studies also provide a better understanding of the strengths and shortcomings of the herding model, in particular we examine trapping effects of crowds behind nonconvex obstacles. © American Institute of Mathematical Sciences.
Direct Numerical Simulation and Visualization of Subcooled Pool Boiling
Directory of Open Access Journals (Sweden)
Tomoaki Kunugi
2014-01-01
Full Text Available A direct numerical simulation of the boiling phenomena is one of the promising approaches in order to clarify their heat transfer characteristics and discuss the mechanism. During these decades, many DNS procedures have been developed according to the recent high performance computers and computational technologies. In this paper, the state of the art of direct numerical simulation of the pool boiling phenomena during mostly two decades is briefly summarized at first, and then the nonempirical boiling and condensation model proposed by the authors is introduced into the MARS (MultiInterface Advection and Reconstruction Solver developed by the authors. On the other hand, in order to clarify the boiling bubble behaviors under the subcooled conditions, the subcooled pool boiling experiments are also performed by using a high speed and high spatial resolution camera with a highly magnified telescope. Resulting from the numerical simulations of the subcooled pool boiling phenomena, the numerical results obtained by the MARS are validated by being compared to the experimental ones and the existing analytical solutions. The numerical results regarding the time evolution of the boiling bubble departure process under the subcooled conditions show a very good agreement with the experimental results. In conclusion, it can be said that the proposed nonempirical boiling and condensation model combined with the MARS has been validated.
Developing a numerical simulation for fading in feldspar
DEFF Research Database (Denmark)
Larsen, A.; Greilich, Steffen; Jain, Mayank;
2009-01-01
Most models describing anomalous fading in feldspars are based on analytical solutions. As an alternative approach we present an entirely numerical model based on statistical sampling that simulates stepwise the charge creation/trapping and recombination in a given phosphor. We assume the number...
Experimental evaluation of numerical simulation of cavitating flow around hydrofoil
Energy Technology Data Exchange (ETDEWEB)
Dular, M.; Bachert, R.; Stoffel, B. [Darmstadt Univ. of Technology, Lab. for Turbomachinery and Fluid Power (Germany); Sirok, B. [Ljubljana Univ., Lab. for Water and Turbine Machines (Slovenia)
2005-08-01
Cavitation in hydraulic machines causes different problems that can be related to its unsteady nature. An experimental and numerical study of developed cavitating flow was performed. Until now simulations of cavitating flow were limited to the self developed 'in house' CFD codes. The goal of the work was to experimentally evaluate the capabilities of a commercial CFD code (Fluent) for simulation of a developed cavitating flow. Two simple hydrofoils that feature some 3D effects of cavitation were used for the experiments. A relatively new technique where PIV method combined with LIF technique was used to experimentally determine the instantaneous and average velocity and void ratio fields (cavity shapes) around the hydrofoils. Distribution of static pressure on the hydrofoil surface was determined. For the numerical simulation of cavitating flow a bubble dynamics cavitation model was used to describe the generation and evaporation of vapour phase. An unsteady RANS 3D simulation was performed. Comparison between numerical and experimental results shows good correlation. The distribution and size of vapour structures and the velocity fields agree well. The distribution of pressure on the hydrofoil surface is correctly predicted. The numerically predicted shedding frequencies are in fair agreement with the experimental data. (authors)
Compressible Turbulent Flow Numerical Simulations of Tip Vortex Cavitation
Khatami, F.; Weide, van der E.T.A.; Hoeijmakers, H.W.M.
2015-01-01
For an elliptic Arndt’s hydrofoil numerical simulations of vortex cavitation are presented. An equilibrium cavitation model is employed. This single-fluid model assumes local thermodynamic and mechanical equilibrium in the mixture region of the flow, is employed. Furthermore, for characterizing the
Seasonal cycle of Martian climate : Experimental data and numerical simulation
Rodin, A. V.; Willson, R. J.
2006-01-01
The most adequate theoretical method of investigating the present-day Martian climate is numerical simulation based on a model of general circulation of the atmosphere. First and foremost, such models encounter the greatest difficulties in description of aerosols and clouds, which in turn essentiall
Numerical Simulation of the Perrin-Like Experiments
Mazur, Zygmunt; Grech, Dariusz
2008-01-01
A simple model of the random Brownian walk of a spherical mesoscopic particle in viscous liquids is proposed. The model can be solved analytically and simulated numerically. The analytic solution gives the known Einstein-Smoluchowski diffusion law r[superscript 2] = 2Dt, where the diffusion constant D is expressed by the mass and geometry of a…
Numerical Simulation and Cold Modeling experiments on Centrifugal Casting
Keerthiprasad, Kestur Sadashivaiah; Murali, Mysore Seetharam; Mukunda, Pudukottah Gopaliengar; Majumdar, Sekhar
2011-02-01
In a centrifugal casting process, the fluid flow eventually determines the quality and characteristics of the final product. It is difficult to study the fluid behavior here because of the opaque nature of melt and mold. In the current investigation, numerical simulations of the flow field and visualization experiments on cold models have been carried out for a centrifugal casting system using horizontal molds and fluids of different viscosities to study the effect of different process variables on the flow pattern. The effects of the thickness of the cylindrical fluid annulus formed inside the mold and the effects of fluid viscosity, diameter, and rotational speed of the mold on the hollow fluid cylinder formation process have been investigated. The numerical simulation results are compared with corresponding data obtained from the cold modeling experiments. The influence of rotational speed in a real-life centrifugal casting system has also been studied using an aluminum-silicon alloy. Cylinders of different thicknesses are cast at different rotational speeds, and the flow patterns observed visually in the actual castings are found to be similar to those recorded in the corresponding cold modeling experiments. Reasonable agreement is observed between the results of numerical simulation and the results of cold modeling experiments with different fluids. The visualization study on the hollow cylinders produced in an actual centrifugal casting process also confirm the conclusions arrived at from the cold modeling experiments and numerical simulation in a qualitative sense.
Optimized firing. Numerical simulation of flow; Optimierte Feuerung. Numerische Stroemungssimulation
Energy Technology Data Exchange (ETDEWEB)
Klasen, T. [Inpro-Consult (Germany); Floetgen, A.
2007-07-01
By the aid of a numerical flow simulation in the beginning of boiler design can be optimized geometrical and process details. An example is shown for a feeding stoker with combined dust firing of an existing boiler plant for biogenic fuels. (GL)
Numerical Simulation of Bubble Evolution in Non-Newtonian Fluid
Institute of Scientific and Technical Information of China (English)
唐亦农; 陈耀松; 陈文芳
1994-01-01
In this paper the bubble issuing from an orifice at the bottom of the boundary evolution in a finite Non-Newtonian fluid(such as Maxwell fluid,Carreu fluid)is numerically simulated The effects of the rheological behavior,physical parameters and circumstantial conditions are discussed in detail
Numerical simulation of the fast dense gas Ludwieg tube experiment
Zamfirescu, C.; Guerdone, A.; Collona, P.
2006-01-01
The preliminary design of a Ludwieg tube experiment for the verification of the existence of nonclassical rarefaction shock waves in dense vapors is here critically analyzed by means of real gas numerical simulations of the experimental setup. The Flexible Asymmetric Shock Tube (FAST) setup is a den
Numerical simulation of airfoil trailing edge serration noise
DEFF Research Database (Denmark)
Zhu, Wei Jun; Shen, Wen Zhong
In the present work, numerical simulations are carried out for a low noise airfoil with and without serrated Trailing Edge. The Ffowcs Williams-Hawkings acoustic analogy is implemented into the in-house incompressible flow solver EllipSys3D. The instantaneous hydrodynamic pressure and velocity...
Numerical simulation and experimental observations of initial friction transients
Energy Technology Data Exchange (ETDEWEB)
Hughes, D.A.; Weingarten, L.I.; Dawson, D.B.
1995-07-01
Experiments were performed to better understand the sliding frictional behavior between metals under relatively high shear and normal forces. Microstructural analyses were done to estimate local near-surface stress and strain gradients. The numerical simulation of the observed frictional behavior was based on a constitutive model that uses a state variable approach.
Numerical simulation of two-phase flow in offshore environments
Wemmenhove, Rik
2008-01-01
Numerical Simulation of Two-Phase Flow in Offshore Environments Rik Wemmenhove Weather conditions on full sea are often violent, leading to breaking waves and lots of spray and air bubbles. As high and steep waves may lead to severe damage on ships and offshore structures, there is a great need for
Seasonal cycle of Martian climate : Experimental data and numerical simulation
Rodin, A. V.; Willson, R. J.
2006-01-01
The most adequate theoretical method of investigating the present-day Martian climate is numerical simulation based on a model of general circulation of the atmosphere. First and foremost, such models encounter the greatest difficulties in description of aerosols and clouds, which in turn
Seasonal cycle of Martian climate : Experimental data and numerical simulation
Rodin, A. V.; Willson, R. J.
2006-01-01
The most adequate theoretical method of investigating the present-day Martian climate is numerical simulation based on a model of general circulation of the atmosphere. First and foremost, such models encounter the greatest difficulties in description of aerosols and clouds, which in turn essentiall
Numerical convergence improvements for porflow unsaturated flow simulations
Energy Technology Data Exchange (ETDEWEB)
Flach, Greg [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)
2017-08-14
Section 3.6 of SRNL (2016) discusses various PORFLOW code improvements to increase modeling efficiency, in preparation for the next E-Area Performance Assessment (WSRC 2008) revision. This memorandum documents interaction with Analytic & Computational Research, Inc. (http://www.acricfd.com/default.htm) to improve numerical convergence efficiency using PORFLOW version 6.42 for unsaturated flow simulations.
Direct Numerical Simulation Sediment Transport in Horizontal Channel
Energy Technology Data Exchange (ETDEWEB)
Uhlmann, M.
2006-07-01
We numerically simulate turbulent flow in a horizontal plane channel over a bed of mobile particles. All scales of fluid motion are resolved without modeling and the phase interface is accurately represented. Our results indicate a possible scenario for the onset of erosion through collective motion induced by buffer-layer streaks. (Author) 27 refs.
Directory of Open Access Journals (Sweden)
Vasily Novozhilov
2011-10-01
Full Text Available Hybrid Propulsion is an attractive alternative to conventional liquid and solid rocket motors. This is an active area of research and technological developments. Potential wide application of Hybrid Engines opens the possibility for safer and more flexible space vehicle launching and manoeuvring. The present paper discusses fundamental combustion issues related to further development of Hybrid Rockets. The emphasis is made on the two aspects: (1 properties of potential polymeric fuels, and their modification, and (2 implementation of comprehensive CFD models for combustion in Hybrid Engines. Fundamentals of polymeric fuel combustion are discussed. Further, steps necessary to accurately describe their burning behaviour by means of CFD models are investigated. Final part of the paper presents results of preliminary CFD simulations of fuel burning process in Hybrid Engine using a simplified set-up.
Working mechanism and numerical simulation of assembly coastal building techniques
Institute of Scientific and Technical Information of China (English)
陈育民; 刘汉龙; 陈泽
2008-01-01
A new coastal technique, named as assembly coastal building, was introduced. The main concept of the technique was the assembling components which could be combined and locked together to form a large caisson. The assembly coastal building technique was used in a sea access road in Zhuanghai 4X1 well, Dagang Oilfield. The design plans and in-situ tests in the sea access road project were introduced in detail. According to the Zhuanghai project, the numerical simulation method of assembly coastal building technique was proposed. 2D numerical simulations were performed in FLAC to analyze the displacement and stability of the technique in the construction process and post-construction period. The settlement calculated is close to the in-situ results, which proves that the proposed numerical method is reasonable. Results show that the assembly coastal building technique has large safety factor under the gravity loading and wave loadings.
Mathematical modeling and numerical simulation of Czochralski Crystal Growth
Energy Technology Data Exchange (ETDEWEB)
Jaervinen, J.; Nieminen, R. [Center for Scientific Computing, Espoo (Finland)
1996-12-31
A detailed mathematical model and numerical simulation tools based on the SUPG Finite Element Method for the Czochralski crystal growth has been developed. In this presentation the mathematical modeling and numerical simulation of the melt flow and the temperature distribution in a rotationally symmetric crystal growth environment is investigated. The temperature distribution and the position of the free boundary between the solid and liquid phases are solved by using the Enthalpy method. Heat inside of the Czochralski furnace is transferred by radiation, conduction and convection. The melt flow is governed by the incompressible Navier-Stokes equations coupled with the enthalpy equation. The melt flow is numerically demonstrated and the temperature distribution in the whole Czochralski furnace. (author)
Numerical simulation of cavitating flow past axisymmetric body
Directory of Open Access Journals (Sweden)
Dong-Hyun Kim
2012-09-01
Full Text Available Cavitating flow simulation is of practical importance for many engineering systems, such as marine propellers, pump impellers, nozzles, torpedoes, etc. The present work has developed the base code to solve the cavitating flows past the axisymmetric bodies with several forebody shapes. The governing equation is the Navier-Stokes equation based on homogeneous mixture model. The momentum is in the mixture phase while the continuity equation is solved in liquid and vapor phase, separately. The solver employs an implicit preconditioning algorithm in curvilinear coordinates. The computations have been carried out for the cylinders with hemispherical, 1-caliber, and 0-caliber forebody and, then, compared with experiments and other numerical results. Fairly good agreements with experiments and numerical results have been achieved. It has been concluded that the present numerical code has successfully accounted for the cavitating flows past axisymmetric bodies. The present code has also shown the capability to simulate ventilated cavitation.
Analytical and numerical simulations of a hydraulic fracturing experiment
Energy Technology Data Exchange (ETDEWEB)
Zhou, M.Z.; Namiq, M.A.; Zhou, L.; Gou, Y. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. of Petroleum Engineering
2008-10-23
Based on simulations of a previously published hydraulic fracturing experiment performed by Casas et al. (2006), this paper presents the performance assessment of the famous analytical fracture 2D-models (PKN and KGD) and a 3D numerical model (FDM program FLAC3D of the ITASCA Inc.). Strain-softening models are used in the FLAC3D to describe the fracture creation and propagation as well as to present the material softening properties (permeability, tensile strength, cohesion, friction and dilation angel) as functions of the plastic strain. The results show that the numerical simulator has a much better performance and produces more reliable results than the analytical fracture models. However, numerical models have limitations and thus potential for further development. (orig.)
Numeric Modified Adomian Decomposition Method for Power System Simulations
Energy Technology Data Exchange (ETDEWEB)
Dimitrovski, Aleksandar D [ORNL; Simunovic, Srdjan [ORNL; Pannala, Sreekanth [ORNL
2016-01-01
This paper investigates the applicability of numeric Wazwaz El Sayed modified Adomian Decomposition Method (WES-ADM) for time domain simulation of power systems. WESADM is a numerical method based on a modified Adomian decomposition (ADM) technique. WES-ADM is a numerical approximation method for the solution of nonlinear ordinary differential equations. The non-linear terms in the differential equations are approximated using Adomian polynomials. In this paper WES-ADM is applied to time domain simulations of multimachine power systems. WECC 3-generator, 9-bus system and IEEE 10-generator, 39-bus system have been used to test the applicability of the approach. Several fault scenarios have been tested. It has been found that the proposed approach is faster than the trapezoidal method with comparable accuracy.
Numerical simulation and experimental progress on plasma window
Wang, S. Z.; Zhu, K.; Huang, S.; Lu, Y. R.; Shi, B. L.
2016-11-01
In this paper, a numerical 2D FLUENT-based magneto-hydrodynamic simulation on 3mm plasma window using argon, taken as a windowless vacuum device, was developed. The gas inlet, arc creation and developing and plasma expansion segments are all contained in this model. In the axis-symmetry cathode structure, a set of parameters including pressure, temperature, velocity and current distribution were obtained and discussed. The fluid dynamics of plasma in cavities with different shapes was researched. Corresponding experiments was carried out and the result agrees well to the numerical simulation. The validity of sealing ability of plasma window has been verified. Relevant further research upon deuteron gas as neutron production target is to be continued, considering larger diameter plasma window experimentally and numerically.
A Numerical Method for Lane-Emden Equations Using Hybrid Functions and the Collocation Method
Directory of Open Access Journals (Sweden)
Changqing Yang
2012-01-01
Full Text Available A numerical method to solve Lane-Emden equations as singular initial value problems is presented in this work. This method is based on the replacement of unknown functions through a truncated series of hybrid of block-pulse functions and Chebyshev polynomials. The collocation method transforms the differential equation into a system of algebraic equations. It also has application in a wide area of differential equations. Corresponding numerical examples are presented to demonstrate the accuracy of the proposed method.
Numerical Simulation on Freezing Process of Saturated Granlar Soil
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
The relation between ice pressure and load as a criterion of segregated ice initiation is introduced into the rigid ice model to simulate frost heave in saturated and granular soil. The calculated results show that unfrozen water content, thermal conductivity and hydraulic conductivity change greatly in frozen fringe. In numerical simulations, the influence of load, hydraulic conductivity and property of soil containing water on the process of soil freezing are analyzed, and the simulation curves such as cumulative heave,the change of depth of frozen and the distributions of water content are similar to the observations reported elsewhere.
Numerical Simulation System for Casting Process in Concurrent Engineering
Institute of Scientific and Technical Information of China (English)
无
1999-01-01
According to the implementing principle and application background of the Concurrent Engineering (CE) project, studies on the integration of numerical simulation system for casting process with CE, simulation of turbulent phenomena in filling process of casting by Algebraic Stress Model (ASM), computation efficiency of filling process and quantitative prediction of shrinkage cavity and porosity under feeding condition of several risers are discussed. After the simulation of casting process of typical magnesium-based alloy casting with complicated structure, remarkable success in assuring the quality is also presented.
Numerical Simulation of Sediment Transport due to Plunging Breaking Waves
DEFF Research Database (Denmark)
Pedersen, Claus
A numerical model simulating the sediment transport due to plunging breaking waves has been developed. The model is two-dimensional, assuming conditions in the long-shore direction invariable. A plunging breaker is simulated by superimposing a non-breaking wave with a jet. Based on the description...... of the sediment transport rates, a simple model describing the morphological changes has been applied to simulate the evolution of a plunge point generated vorticity included, the bottom topography from the experiments by Dette & Uliczka was not in equilibrium according to the model....
Numerical Simulations of Equiaxed Dendrite Growth Using Phase Field Method
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
Phase field method offers the prospect of being able to perform realistic numerical experiments on dendrite growthin a metallic system. In this paper, the equiaxed dendrite evolution during the solidification of a pure material wasnumerically simulated using the phase field model. The equiaxed dendrite growth in a two-dimensional square domainof undercooled melt (nickel) with four-fold anisotropy was simulated. The phase field model equations was solvedusing the explicit finite difference method on a uniform mesh. The formation of various equiaxed dendrite patternswas shown by a series of simulations, and the effect of anisotropy on equiaxed dendrite morphology was investigated.
A Parallel Genetic Simulated Annealing Hybrid Algorithm for Task Scheduling
Institute of Scientific and Technical Information of China (English)
SHU Wanneng; ZHENG Shijue
2006-01-01
In this paper combined with the advantages of genetic algorithm and simulated annealing, brings forward a parallel genetic simulated annealing hybrid algorithm (PGSAHA) and applied to solve task scheduling problem in grid computing .It first generates a new group of individuals through genetic operation such as reproduction, crossover, mutation, etc, and than simulated anneals independently all the generated individuals respectively.When the temperature in the process of cooling no longer falls, the result is the optimal solution on the whole.From the analysis and experiment result, it is concluded that this algorithm is superior to genetic algorithm and simulated annealing.
Pressure calculation in hybrid particle-field simulations.
Milano, Giuseppe; Kawakatsu, Toshihiro
2010-12-07
In the framework of a recently developed scheme for a hybrid particle-field simulation techniques where self-consistent field (SCF) theory and particle models (molecular dynamics) are combined [J. Chem. Phys. 130, 214106 (2009)], we developed a general formulation for the calculation of instantaneous pressure and stress tensor. The expressions have been derived from statistical mechanical definition of the pressure starting from the expression for the free energy functional in the SCF theory. An implementation of the derived formulation suitable for hybrid particle-field molecular dynamics-self-consistent field simulations is described. A series of test simulations on model systems are reported comparing the calculated pressure with those obtained from standard molecular dynamics simulations based on pair potentials.
Understanding casing flow in Pelton turbines by numerical simulation
Rentschler, M.; Neuhauser, M.; Marongiu, J. C.; Parkinson, E.
2016-11-01
For rehabilitation projects of Pelton turbines, the flow in the casing may have an important influence on the overall performance of the machine. Water sheets returning on the jets or on the runner significantly reduce efficiency, and run-away speed depends on the flow in the casing. CFD simulations can provide a detailed insight into this type of flow, but these simulations are computationally intensive. As in general the volume of water in a Pelton turbine is small compared to the complete volume of the turbine housing, a single phase simulation greatly reduces the complexity of the simulation. In the present work a numerical tool based on the SPH-ALE meshless method is used to simulate the casing flow in a Pelton turbine. Using improved order schemes reduces the numerical viscosity. This is necessary to resolve the flow in the jet and on the casing wall, where the velocity differs by two orders of magnitude. The results are compared to flow visualizations and measurement in a hydraulic laboratory. Several rehabilitation projects proved the added value of understanding the flow in the Pelton casing. The flow simulation helps designing casing insert, not only to see their influence on the flow, but also to calculate the stress in the inserts. In some projects, the casing simulation leads to the understanding of unexpected behavior of the flow. One such example is presented where the backsplash of a deflector hit the runner, creating a reversed rotation of the runner.
A VERTICAL 2-D NUMERICAL SIMULATION OF SUSPENDED SEDIMENT TRANSPORT
Institute of Scientific and Technical Information of China (English)
ZHANG Jing-xin; LIU Hua
2007-01-01
Numerical simulation of sediment transport and bed evolution has become an important technique in the sediment research. In this article, a numerical model of suspended sediment transport was proposed, which was established in the vertical coordinate for fitting the free surface and bottom. In the research of the sediment transport, the predominant factors were found to be the eddy diffusion, the settling velocity, the bed condition and so on. By the aid of the model in the article, the contribution of the Rouse parameter to the vertical profile of sediment concentration was clarified, which was identical to the theoretical results. In the comparison of the numerical results with laboratory data, the agreement between experimental data and numerical results was reached except for some data. And the possible reasons for the disagreement were discussed.
Simulation of Fully Nonlinear 3-D Numerical Wave Tank
Institute of Scientific and Technical Information of China (English)
张晓兔; 滕斌; 宁德志
2004-01-01
A fully nonlinear numerical wave tank (NWT) has been simulated by use of a three-dimensional higher order boundary element method (HOBEM) in the time domain. Within the frame of potential flow and the adoption of simply Rankine source, the resulting boundary integral equation is repeatedly solved at each time step and the fully nonlinear free surface boundary conditions are integrated with time to update its position and boundary values. A smooth technique is also adopted in order to eliminate the possible saw-tooth numerical instabilities. The incident wave at the uptank is given as theoretical wave in this paper. The outgoing waves are absorbed inside a damping zone by spatially varying artificial damping on the free surface at the wave tank end. The numerical results show that the NWT developed by these approaches has a high accuracy and good numerical stability.
Simulating Strongly Correlated Electron Systems with Hybrid Monte Carlo
Institute of Scientific and Technical Information of China (English)
LIU Chuan
2000-01-01
Using the path integral representation, the Hubbard and the periodic Anderson model on D-dimensional cubic lattice are transformed into field theories of fermions in D + 1 dimensions. These theories at half-filling possess a positive definite real symmetry fermion matrix and can be simulated using the hybrid Monte Carlo method.
Numerical simulation of the characteristics of turbulent Taylor vortex flow
Institute of Scientific and Technical Information of China (English)
ZHOU Xiantao; PAN Jiazhen; CHEN Liqing; SHI Yan; CHEN Wenmei; CHU Liangyin
2007-01-01
Turbulent Taylor vortex flow,which is contained between a rotating inner cylinder and a coaxial fixed outer cylinder with fixed ends,is simulated by applying the development in Reynolds stress equations mold (RSM) of the micro-perturbation.This resulted from the truncation error between the numerical solution and exact solution of the Reynolds stress equations.Based on the numerical simulation results of the turbulent Taylor vortex flow,its characteristics such as the fluctuation of the flow field,the precipitous drop of azimuthal velocity,the jet flow of radial velocity,the periodicity of axial velocity,the wave periodicity of pressure distribution,the polarization of shear stress on the walls,and the turbulence intensity in the jet region,are discussed.Comparing the pilot results measured by previous methods,the relative error of the characteristics predicted by simulation is less than 30%.
NUMERICAL SIMULATION OF SKIMMING FLOW OVER MILD STEPPED CHANNEL
Institute of Scientific and Technical Information of China (English)
DONG Zhi-yong; LEE Joseph Hun-wei
2006-01-01
Numerical simulation of stepped channel flow was conducted using turbulence models based on the VOF technique. Stepped channel flow is a complicated air-water two-phase flow with free surface, which can be divided into three flow regimes: skimming flow, nappe flow and transition flow. The characteristics of skimming flow over mild stepped channel was investigated, including friction factors, air concentration profiles velocity field, clear-water and bulked depths, static pressure, etc. Smooth channel flow was also simulated to compare the hydraulic characteristics of the stepped channel flow with the smooth one. Comparisons between the computed and the measured were made. Furthermore, comparison of the computed air concentration with Straub and Anderson's data was also performed. The Fluent 6.1 software was employed to conduct this numerical simulation work.
Visualization of a Numerical Simulation of GW 150914
Rosato, Nicole; Healy, James; Lousto, Carlos
2017-01-01
We present an analysis of a simulation displaying apparent horizon curvature and radiation emitted from a binary black hole system modeling GW-150914 during merger. The simulation follows the system from seven orbits prior to merger to the resultant Kerr black hole. Horizon curvature was calculated using a mean curvature flow algorithm. Radiation data was visualized via the Ψ4 component of the Weyl scalars, which were determined using a numerical quasi-Kinnersley method. We also present a comparative study of the differences in quasi-Kinnersley and PsiKadelia tetrads to construct Ψ4. The analysis is displayed on a movie generated from these numerical results, and was done using VisIt software from Lawrence Livermore National Laboratory. This simulation and analysis gives more insight into the merger of the system GW 150914.
Redonnet, S.; Ben Khelil, S.; Bulté, J.; Cunha, G.
2017-09-01
With the objective of aircraft noise mitigation, we here address the numerical characterization of the aeroacoustics by a simplified nose landing gear (NLG), through the use of advanced simulation and signal processing techniques. To this end, the NLG noise physics is first simulated through an advanced hybrid approach, which relies on Computational Fluid Dynamics (CFD) and Computational AeroAcoustics (CAA) calculations. Compared to more traditional hybrid methods (e.g. those relying on the use of an Acoustic Analogy), and although it is used here with some approximations made (e.g. design of the CFD-CAA interface), the present approach does not rely on restrictive assumptions (e.g. equivalent noise source, homogeneous propagation medium), which allows to incorporate more realism into the prediction. In a second step, the outputs coming from such CFD-CAA hybrid calculations are processed through both traditional and advanced post-processing techniques, thus offering to further investigate the NLG's noise source mechanisms. Among other things, this work highlights how advanced computational methodologies are now mature enough to not only simulate realistic problems of airframe noise emission, but also to investigate their underlying physics.
Numerical simulation of thermal behavior during laser metal deposition shaping
Institute of Scientific and Technical Information of China (English)
LONG Ri-sheng; LIU Wei-jun; XING Fei; WANG Hua-bing
2008-01-01
Based on the element life and death theory of finite element analysis (FEA),a three-dimensional multi-track and multi-layer model for laser metal deposition shaping (LMDS) was developed with ANSYS parametric design language (APDL),and detailed numerical simulations of temperature and thermal stress were conducted.Among those simulations,long-edge parallel reciprocating scanning method was introduced.The distribution regularities of temperature,temperature gradient,Von Mise's effective stress,X-directional,Y-directional and Z-directional thermal stresses were studied.LMDS experiments were carried out with nickel-based superalloy using the same process parameters as those in simulation.The measured temperatures of molten pool are in accordance with the simulated results.The crack engendering and developing regularities of samples show good agreement with the simulation results.
Kuo, K. A.; Verbraken, H.; Degrande, G.; Lombaert, G.
2016-07-01
Along with the rapid expansion of urban rail networks comes the need for accurate predictions of railway induced vibration levels at grade and in buildings. Current computational methods for making predictions of railway induced ground vibration rely on simplifying modelling assumptions and require detailed parameter inputs, which lead to high levels of uncertainty. It is possible to mitigate against these issues using a combination of field measurements and state-of-the-art numerical methods, known as a hybrid model. In this paper, two hybrid models are developed, based on the use of separate source and propagation terms that are quantified using in situ measurements or modelling results. These models are implemented using term definitions proposed by the Federal Railroad Administration and assessed using the specific illustration of a surface railway. It is shown that the limitations of numerical and empirical methods can be addressed in a hybrid procedure without compromising prediction accuracy.
Directory of Open Access Journals (Sweden)
D. Vivek
2016-11-01
Full Text Available In this paper, the improved Euler method is used for solving hybrid fuzzy fractional differential equations (HFFDE of order $q \\in (0, 1 $ under Caputo-type fuzzy fractional derivatives. This method is based on the fractional Euler method and generalized Taylor's formula. The accuracy and efficiency of the proposed method is demonstrated by solving numerical examples.
Numerical Analysis of Energy Effect in Laser-TIG Hybrid Welding
Institute of Scientific and Technical Information of China (English)
Yanbin CHEN; Liqun LI; Junfei FANG; Xiaosong FENG
2003-01-01
The hybrid source that combined CO2 laser with TIG arc to proceed welding was analyzed. Based on an energymodel, the temperature field and weld shape were calculated numerically. The heat transfer characteristic of thehybrid heat source to workpiece and i
Enhanced FAA-hybrid III numerical dummy model in Madymo for aircraft occupant safety assessment
Boucher, H.; Waagmeester, C.D.
2003-01-01
To improve survivability and to minimize the risk of injury to occupants in helicopter crash events, a complete Cabin Safety System concept including safety features and an enhanced FAA-Hybrid III dummy were developed within the HeliSafe project. A numerical tool was also created and validated to al
Modelling and Simulation of System Dynamics of Hybrid-Driven Precision Press
Institute of Scientific and Technical Information of China (English)
LI Yonggang; ZHANG Ce; MENG Caifang; SONG Yimin
2005-01-01
Different from conventional mechanical systems with single degree of freedom (DOF), the main idea of the system of hybrid-driven precision press is to combine the motion of a constant speed motor with a servomotor via a two-DOF mechanism to provide flexible output. In order to make the feasibility clear, this paper studies theoretically the dynamic characteristics of this hybrid-driven mechanical system.Firstly,the dynamics model of the whole electromechanical system is set up by combining dynamic equations of DC motors with those of two-DOF nine-bar mechanism deduced by the Lagrange′s formula. Secondly through the numerical solution with the fourth Runge-Kutta, computer simulation about the dynamics is done, which shows that the designed and optimized hybrid-driven precision press is feasible in theory. These provide theoretical basis for later experimental research.
Hybrid Techniques for Quantum Circuit Simulation
2014-02-01
15 Figure 10. (a) Ripple-carry (Cuccaro) adder for 3...bit numbers [17]. (b) Average runtime and memory needed by Quipu and QuIDDPro (QPLite) to simulate -bit Cuccaro adders ...b) scaled adder , (c) binary-to- stochastic converter, and (d) stochastic-to-binary converter
Thermal numerical simulator for laboratory evaluation of steamflood oil recovery
Energy Technology Data Exchange (ETDEWEB)
Sarathi, P.
1991-04-01
A thermal numerical simulator running on an IBM AT compatible personal computer is described. The simulator was designed to assist laboratory design and evaluation of steamflood oil recovery. An overview of the historical evolution of numerical thermal simulation, NIPER's approach to solving these problems with a desk top computer, the derivation of equations and a description of approaches used to solve these equations, and verification of the simulator using published data sets and sensitivity analysis are presented. The developed model is a three-phase, two-dimensional multicomponent simulator capable of being run in one or two dimensions. Mass transfer among the phases and components is dictated by pressure- and temperature-dependent vapor-liquid equilibria. Gravity and capillary pressure phenomena were included. Energy is transferred by conduction, convection, vaporization and condensation. The model employs a block centered grid system with a five-point discretization scheme. Both areal and vertical cross-sectional simulations are possible. A sequential solution technique is employed to solve the finite difference equations. The study clearly indicated the importance of heat loss, injected steam quality, and injection rate to the process. Dependence of overall recovery on oil volatility and viscosity is emphasized. The process is very sensitive to relative permeability values. Time-step sensitivity runs indicted that the current version is time-step sensitive and exhibits conditional stability. 75 refs., 19 figs., 19 tabs.
Numerical Propulsion System Simulation (NPSS) 1999 Industry Review
Lytle, John; Follen, Greg; Naiman, Cynthia; Evans, Austin
2000-01-01
The technologies necessary to enable detailed numerical simulations of complete propulsion systems are being developed at the NASA Glenn Research Center in cooperation with industry, academia, and other government agencies. Large scale, detailed simulations will be of great value to the nation because they eliminate some of the costly testing required to develop and certify advanced propulsion systems. In addition, time and cost savings will be achieved by enabling design details to be evaluated early in the development process before a commitment is made to a specific design. This concept is called the Numerical Propulsion System Simulation (NPSS). NPSS consists of three main elements: (1) engineering models that enable multidisciplinary analysis of large subsystems and systems at various levels of detail, (2) a simulation environment that maximizes designer productivity, and (3) a cost-effective, high-performance computing platform. A fundamental requirement of the concept is that the simulations must be capable of overnight execution on easily accessible computing platforms. This will greatly facilitate the use of large-scale simulations in a design environment. This paper describes the current status of the NPSS with specific emphasis on the progress made over the past year on air breathing propulsion applications. In addition, the paper contains a summary of the feedback received from industry partners in the development effort and the actions taken over the past year to respond to that feedback. The NPSS development was supported in FY99 by the High Performance Computing and Communications Program.
Wind Solar Hybrid System Rectifier Stage Topology Simulation
Directory of Open Access Journals (Sweden)
Anup M. Gakare
2014-06-01
Full Text Available This paper presents power-control strategies of a grid-connected hybrid generation system with versatile power transfer. The hybrid system allows maximum utilization of freely available renewable sources like wind and photovoltaic energies. This paper presents a new system configuration of the multi input rectifier stage for a hybrid wind and photovoltaic energy system. This configuration allows the two sources to supply the load simultaneously depending on the availability of the energy sources maximum power from the sun when it is available. An adaptive MPPT algorithm with a standard perturbs and observed method will be used for the Photo Voltaic system. The main advantage of the hybrid system is to give continuous power supply to the load. The gating pulses to the inverter switches are implemented with conventional and fuzzy controller. This hybrid wind-photo voltaic system is modeled in MATLAB/ SIMULINK environment. Simulation circuit is analyzed and results are presented for this hybrid wind and solar energy system.
Chen, Qiang; Chen, Bin
2012-10-01
In this paper, a hybrid electrodynamics and kinetics numerical model based on the finite-difference time-domain method and lattice Boltzmann method is presented for electromagnetic wave propagation in weakly ionized hydrogen plasmas. In this framework, the multicomponent Bhatnagar-Gross-Krook collision model considering both elastic and Coulomb collisions and the multicomponent force model based on the Guo model are introduced, which supply a hyperfine description on the interaction between electromagnetic wave and weakly ionized plasma. Cubic spline interpolation and mean filtering technique are separately introduced to solve the multiscalar problem and enhance the physical quantities, which are polluted by numerical noise. Several simulations have been implemented to validate our model. The numerical results are consistent with a simplified analytical model, which demonstrates that this model can obtain satisfying numerical solutions successfully.
Non-robust numerical simulations of analogue extension experiments
Naliboff, John; Buiter, Susanne
2016-04-01
Numerical and analogue models of lithospheric deformation provide significant insight into the tectonic processes that lead to specific structural and geophysical observations. As these two types of models contain distinct assumptions and tradeoffs, investigations drawing conclusions from both can reveal robust links between first-order processes and observations. Recent studies have focused on detailed comparisons between numerical and analogue experiments in both compressional and extensional tectonics, sometimes involving multiple lithospheric deformation codes and analogue setups. While such comparisons often show good agreement on first-order deformation styles, results frequently diverge on second-order structures, such as shear zone dip angles or spacing, and in certain cases even on first-order structures. Here, we present finite-element experiments that are designed to directly reproduce analogue "sandbox" extension experiments at the cm-scale. We use material properties and boundary conditions that are directly taken from analogue experiments and use a Drucker-Prager failure model to simulate shear zone formation in sand. We find that our numerical experiments are highly sensitive to numerous numerical parameters. For example, changes to the numerical resolution, velocity convergence parameters and elemental viscosity averaging commonly produce significant changes in first- and second-order structures accommodating deformation. The sensitivity of the numerical simulations to small parameter changes likely reflects a number of factors, including, but not limited to, high angles of internal friction assigned to sand, complex, unknown interactions between the brittle sand (used as an upper crust equivalent) and viscous silicone (lower crust), highly non-linear strain weakening processes and poor constraints on the cohesion of sand. Our numerical-analogue comparison is hampered by (a) an incomplete knowledge of the fine details of sand failure and sand
A robust method for handling low density regions in hybrid simulations for collisionless plasmas
Energy Technology Data Exchange (ETDEWEB)
Amano, Takanobu, E-mail: amano@eps.s.u-tokyo.ac.jp; Higashimori, Katsuaki; Shirakawa, Keisuke
2014-10-15
A robust method to handle vacuum and near vacuum regions in hybrid simulations for space and astrophysical plasmas is presented. The conventional hybrid simulation model dealing with kinetic ions and a massless charge-neutralizing electron fluid is known to be susceptible to numerical instability due to divergence of the whistler-mode wave dispersion, as well as division-by-density operation in regions of low density. Consequently, a pure vacuum region is not allowed to exist in the simulation domain unless some ad hoc technique is used. To resolve this difficulty, an alternative way to introduce finite electron inertia effect is proposed. Contrary to the conventional method, the proposed one introduces a correction to the electric field rather than the magnetic field. It is shown that the generalized Ohm's law correctly reduces to Laplace's equation in a vacuum which therefore does not involve any numerical problems. In addition, a variable ion-to-electron mass ratio is introduced to reduce the phase velocity of high frequency whistler waves at low density regions so that the stability condition is always satisfied. It is demonstrated that the proposed model is able to handle near vacuum regions generated as a result of nonlinear self-consistent development of the system, as well as pure vacuum regions set up at the initial condition, without losing the advantages of the standard hybrid code.
On the use of reverse Brownian motion to accelerate hybrid simulations
Bakarji, Joseph; Tartakovsky, Daniel M.
2017-04-01
Multiscale and multiphysics simulations are two rapidly developing fields of scientific computing. Efficient coupling of continuum (deterministic or stochastic) constitutive solvers with their discrete (stochastic, particle-based) counterparts is a common challenge in both kinds of simulations. We focus on interfacial, tightly coupled simulations of diffusion that combine continuum and particle-based solvers. The latter employs the reverse Brownian motion (rBm), a Monte Carlo approach that allows one to enforce inhomogeneous Dirichlet, Neumann, or Robin boundary conditions and is trivially parallelizable. We discuss numerical approaches for improving the accuracy of rBm in the presence of inhomogeneous Neumann boundary conditions and alternative strategies for coupling the rBm solver with its continuum counterpart. Numerical experiments are used to investigate the convergence, stability, and computational efficiency of the proposed hybrid algorithm.
Graphics interfaces and numerical simulations: Mexican Virtual Solar Observatory
Hernández, L.; González, A.; Salas, G.; Santillán, A.
2007-08-01
Preliminary results associated to the computational development and creation of the Mexican Virtual Solar Observatory (MVSO) are presented. Basically, the MVSO prototype consists of two parts: the first, related to observations that have been made during the past ten years at the Solar Observation Station (EOS) and at the Carl Sagan Observatory (OCS) of the Universidad de Sonora in Mexico. The second part is associated to the creation and manipulation of a database produced by numerical simulations related to solar phenomena, we are using the MHD ZEUS-3D code. The development of this prototype was made using mysql, apache, java and VSO 1.2. based GNU and `open source philosophy'. A graphic user interface (GUI) was created in order to make web-based, remote numerical simulations. For this purpose, Mono was used, because it is provides the necessary software to develop and run .NET client and server applications on Linux. Although this project is still under development, we hope to have access, by means of this portal, to other virtual solar observatories and to be able to count on a database created through numerical simulations or, given the case, perform simulations associated to solar phenomena.
Image based numerical simulation of hemodynamics in a intracranial aneurysm
Le, Trung; Ge, Liang; Sotiropoulos, Fotis; Kallmes, David; Cloft, Harry; Lewis, Debra; Dai, Daying; Ding, Yonghong; Kadirvel, Ramanathan
2007-11-01
Image-based numerical simulations of hemodynamics in a intracranial aneurysm are carried out. The numerical solver based on CURVIB (curvilinear grid/immersed boundary method) approach developed in Ge and Sotiropoulos, JCP 2007 is used to simulate the blood flow. A curvilinear grid system that gradually follows the curved geometry of artery wall and consists of approximately 5M grid nodes is constructed as the background grid system and the boundaries of the investigated artery and aneurysm are treated as immersed boundaries. The surface geometry of aneurysm wall is reconstructed from an angiography study of an aneurysm formed on the common carotid artery (CCA) of a rabbit and discretized with triangular meshes. At the inlet a physiological flow waveform is specified and direct numerical simulations are used to simulate the blood flow. Very rich vortical dynamics is observed within the aneurysm area, with a ring like vortex sheds from the proximal side of aneurysm, develops and impinge onto the distal side of the aneurysm as flow develops, and destructs into smaller vortices during later cardiac cycle. This work was supported in part by the University of Minnesota Supercomputing Institute.
MADNESS: A Multiresolution, Adaptive Numerical Environment for Scientific Simulation
Energy Technology Data Exchange (ETDEWEB)
Harrison, Robert J.; Beylkin, Gregory; Bischoff, Florian A.; Calvin, Justus A.; Fann, George I.; Fosso-Tande, Jacob; Galindo, Diego; Hammond, Jeff R.; Hartman-Baker, Rebecca; Hill, Judith C.; Jia, Jun; Kottmann, Jakob S.; Yvonne Ou, M-J.; Pei, Junchen; Ratcliff, Laura E.; Reuter, Matthew G.; Richie-Halford, Adam C.; Romero, Nichols A.; Sekino, Hideo; Shelton, William A.; Sundahl, Bryan E.; Thornton, W. Scott; Valeev, Edward F.; Vázquez-Mayagoitia, Álvaro; Vence, Nicholas; Yanai, Takeshi; Yokoi, Yukina
2016-01-01
MADNESS (multiresolution adaptive numerical environment for scientific simulation) is a high-level software environment for solving integral and differential equations in many dimensions that uses adaptive and fast harmonic analysis methods with guaranteed precision based on multiresolution analysis and separated representations. Underpinning the numerical capabilities is a powerful petascale parallel programming environment that aims to increase both programmer productivity and code scalability. This paper describes the features and capabilities of MADNESS and briefly discusses some current applications in chemistry and several areas of physics.
Recent Advances in the Numerical Simulations of Binary Black Holes
Marronetti, Pedro
2011-01-01
Since the breakthrough papers from 2005/2006, the field of numerical relativity has experienced a growth spurt that took the two-body problem in general relativity from the category of "really-hard-problems" to the realm of "things-we-know-how-to-do". Simulations of binary black holes in circular orbits, the holy grail of numerical relativity, are now tractable problems that lead to some of the most spectacular results in general relativity in recent years. We cover here some of the latest achievements and highlight the field's next challenges.
NUMERICAL SIMULATION OF PHYSICAL SYSTEMS IN AGRI-FOOD ENGINEERING
Directory of Open Access Journals (Sweden)
Angelo Fabbri
2012-06-01
Full Text Available In agri-food engineering many complex problems arise in plant and process design. Specifically the designer has to deal with fluid dynamics, thermal or mechanical problems, often characterized by physics coupling, non-linearity, irregular geometry, anisotropy and in definitive rather high complexity. In recent years, the ever growing availability of computational power at low cost, made these problems more often approached with numerical simulation techniques. Mainly in terms of finite elements and finite volumes. In this paper the fundamentals of numerical methods are briefly recalled and a discussion about their possibility of application in the food and agricultural engineering is developed.
A hybrid experimental-numerical technique for determining 3D velocity fields from planar 2D PIV data
Eden, A.; Sigurdson, M.; Mezić, I.; Meinhart, C. D.
2016-09-01
Knowledge of 3D, three component velocity fields is central to the understanding and development of effective microfluidic devices for lab-on-chip mixing applications. In this paper we present a hybrid experimental-numerical method for the generation of 3D flow information from 2D particle image velocimetry (PIV) experimental data and finite element simulations of an alternating current electrothermal (ACET) micromixer. A numerical least-squares optimization algorithm is applied to a theory-based 3D multiphysics simulation in conjunction with 2D PIV data to generate an improved estimation of the steady state velocity field. This 3D velocity field can be used to assess mixing phenomena more accurately than would be possible through simulation alone. Our technique can also be used to estimate uncertain quantities in experimental situations by fitting the gathered field data to a simulated physical model. The optimization algorithm reduced the root-mean-squared difference between the experimental and simulated velocity fields in the target region by more than a factor of 4, resulting in an average error less than 12% of the average velocity magnitude.
A hybrid approach to simulating mechanical properties of polymer nanocomposites.
Mccarron, Andy P; Raj, Sharad; Hyers, Robert; Kim, Moon K
2009-12-01
Empirical studies indicate that a polymer reinforced with nanoscale particles could enhance its mechanical properties such as stiffness and toughness. To give insight into how and why this nanoparticle reinforcement is effective, it is necessary to develop computational models that can accurately simulate the effects of nanoparticles on the fracture characteristics of polymer composites. Furthermore, a hybrid model that can account for both continuum and non-continuum effects will hasten the development of not only new hierarchical composite materials but also new theories to explain their behavior. This paper presents a hybrid modeling scheme for simulating fracture of polymer nanocomposites by utilizing an atomistic modeling approach called Elastic Network Model (ENM) in conjunction with a traditional Finite Element Analysis (FEA). The novelty of this hybrid ENM-FEA approach lies in its ability to model less interesting outer domains with FEA while still accounting for areas of interest such as crack tip reion and the interface between a nanoparticle and the polymer matrix at atomic scale with ENM. Various simulation conditions have been tested to determine the feasibility of the proposed hybrid model. For instance, an iterative result from a uniaxial loading with isotropic properties in an ENM-FEA model shows accuracy and convergence to the analytic solution.
Simulation of guided wave propagation near numerical Brillouin zones
Kijanka, Piotr; Staszewski, Wieslaw J.; Packo, Pawel
2016-04-01
Attractive properties of guided waves provides very unique potential for characterization of incipient damage, particularly in plate-like structures. Among other properties, guided waves can propagate over long distances and can be used to monitor hidden structural features and components. On the other hand, guided propagation brings substantial challenges for data analysis. Signal processing techniques are frequently supported by numerical simulations in order to facilitate problem solution. When employing numerical models additional sources of errors are introduced. These can play significant role for design and development of a wave-based monitoring strategy. Hence, the paper presents an investigation of numerical models for guided waves generation, propagation and sensing. Numerical dispersion analysis, for guided waves in plates, based on the LISA approach is presented and discussed in the paper. Both dispersion and modal amplitudes characteristics are analysed. It is shown that wave propagation in a numerical model resembles propagation in a periodic medium. Consequently, Lamb wave propagation close to numerical Brillouin zone is investigated and characterized.
Simulation and Test of a Fuel Cell Hybrid Golf Cart
Directory of Open Access Journals (Sweden)
Jingming Liang
2014-01-01
Full Text Available This paper establishes the simulation model of fuel cell hybrid golf cart (FCHGC, which applies the non-GUI mode of the Advanced Vehicle Simulator (ADVISOR and the genetic algorithm (GA to optimize it. Simulation of the objective function is composed of fuel consumption and vehicle dynamic performance; the variables are the fuel cell stack power sizes and the battery numbers. By means of simulation, the optimal parameters of vehicle power unit, fuel cell stack, and battery pack are worked out. On this basis, GUI mode of ADVISOR is used to select the rated power of vehicle motor. In line with simulation parameters, an electrical golf cart is refitted by adding a 2 kW hydrogen air proton exchange membrane fuel cell (PEMFC stack system and test the FCHGC. The result shows that the simulation data is effective but it needs improving compared with that of the real cart test.
A Matlab—Based Simulation for Hybrid Electric Motorcycle
Institute of Scientific and Technical Information of China (English)
邵定国; 李永斌; 汪信尧; 江建中
2003-01-01
This paper presents a simulation and modeling package based on Matlab for a parallel hybrid electric motorcycle (HEM).The package consists of several main detailed models: internal combustion engine (ICE), motor, continuously variable transmission(CVT), battery, energy management system (EMS) etc. Each component is built as a library, and can be connected together accord-ing to the parallel HEM's topology. Simulation results, such as ICE power demand, motor power demand, battery instantaneous state-of-charge (SOC), pollution emissions etc. Are given and discussed. Lastly experimental data verify our simulation results.
Design and numerical simulation of thermionic electron gun
Hosseinzadeh, M
2015-01-01
This paper reports the simulation of an electron gun. The effects of some parameters on the beam quality were studied and optimal choices were identified. It gives numerical beam qualities in common electrostatic triode gun, and the dependences on design parameters such as electrode geometries and bias voltages to these electrodes are shown. An electron beam of diameter 5 mm with energy of five kilo electron volt was assumed for simulation process. Some design parameters were identified as variable parameters in the presence of space charge. These parameters are the inclination angle of emission electrode, the applied voltage to focusing electrode, the gap width between the emission electrode and the focusing electrode and the diameter of the focusing electrode. The triode extraction system is designed and optimized by using CST software (for Particle Beam Simulations). The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that the inclination angle ...
A fast direct numerical simulation method for characterising hydraulic roughness
Chung, Daniel; MacDonald, Michael; Hutchins, Nicholas; Ooi, Andrew
2015-01-01
We describe a fast direct numerical simulation (DNS) method that promises to directly characterise the hydraulic roughness of any given rough surface, from the hydraulically smooth to the fully rough regime. The method circumvents the unfavourable computational cost associated with simulating high-Reynolds-number flows by employing minimal-span channels (Jimenez & Moin 1991). Proof-of-concept simulations demonstrate that flows in minimal-span channels are sufficient for capturing the downward velocity shift, that is, the Hama roughness function, predicted by flows in full-span channels. We consider two sets of simulations, first with modelled roughness imposed by body forces, and second with explicit roughness described by roughness-conforming grids. Owing to the minimal cost, we are able to conduct DNSs with increasing roughness Reynolds numbers while maintaining a fixed blockage ratio, as is typical in full-scale applications. The present method promises a practical, fast and accurate tool for character...
Numerical simulation of pulsatile flow in rough pipes
Chin, Cheng; Monty, Jason; Ooi, Andrew; Illingworth, Simon; Marusic, Ivan; Skvortsov, Alex
2016-11-01
Direct numerical simulation (DNS) of pulsatile turbulent pipe flow is carried out over three-dimensional sinusoidal surfaces mimicking surface roughness. The simulations are performed at a mean Reynolds number of Reτ 540 (based on friction velocity, uτ, and pipe radii, δ) and at various roughness profiles following the study of Chan et al., where the size of the roughness (roughness semi-amplitude height h+ and wavelength λ+) is increased geometrically while maintaining the height-to-wavelength ratio of the sinusoidal roughness element. Results from the pulsatile simulations are compared with non-pulsatile simulations to investigate the effects of pulsation on the Hama roughness function, ΔU+ . Other turbulence statistics including mean turbulence intensities, Reynolds stresses and energy spectra are analysed. In addition, instantaneous phase (eg. at maximum and minimum flow velocities) and phase-averaged flow structures are presented and discussed.
On the application of hybrid meshes in hydraulic machinery CFD simulations
Schlipf, M.; Tismer, A.; Riedelbauch, S.
2016-11-01
The application of two different hybrid mesh types for the simulation of a Francis runner for automated optimization processes without user input is investigated. Those mesh types are applied to simplified test cases such as flow around NACA airfoils to identify the special mesh resolution effects with reduced complexity, like rotating cascade flows, as they occur in a turbomachine runner channel. The analysis includes the application of those different meshes on the geometries by keeping defined quality criteria and exploring the influences on the simulation results. All results are compared with reference values gained by simulations with blockstructured hexahedron meshes and the same numerical scheme. This avoids additional inaccuracies caused by further numerical and experimental measurement methods. The results show that a simulation with hybrid meshes built up by a blockstructured domain with hexahedrons around the blade in combination with a tetrahedral far field in the channel is sufficient to get results which are almost as accurate as the results gained by the reference simulation. Furthermore this method is robust enough for automated processes without user input and enables comparable meshes in size, distribution and quality for different similar geometries as occurring in optimization processes.
Numerical simulation of supersquare patterns in Faraday waves
Kahouadji, L.; Périnet, N.; Tuckerman, L. S.; Shin, S.; Chergui, J.; Juric, D.
2015-06-01
We report the first simulations of the Faraday instability using the full three-dimensional Navier-Stokes equations in domains much larger than the characteristic wavelength of the pattern. We use a massively parallel code based on a hybrid Front-Tracking/Level-set algorithm for Lagrangian tracking of arbitrarily deformable phase interfaces. Simulations performed in rectangular and cylindrical domains yield complex patterns. In particular, a superlattice-like pattern similar to those of [Douady & Fauve, Europhys. Lett. 6, 221-226 (1988); Douady, J. Fluid Mech. 221, 383-409 (1990)] is observed. The pattern consists of the superposition of two square superlattices. We conjecture that such patterns are widespread if the square container is large compared to the critical wavelength. In the cylinder, pentagonal cells near the outer wall allow a square-wave pattern to be accommodated in the center.
A hybrid SPH/N-body method for star cluster simulations
Hubber, D A; Smith, R; Goodwin, S P
2013-01-01
We present a new hybrid Smoothed Particle Hydrodynamics (SPH)/N-body method for modelling the collisional stellar dynamics of young clusters in a live gas background. By deriving the equations of motion from Lagrangian mechanics we obtain a formally conservative combined SPH/N-body scheme. The SPH gas particles are integrated with a 2nd order Leapfrog, and the stars with a 4th order Hermite scheme. Our new approach is intended to bridge the divide between the detailed, but expensive, full hydrodynamical simulations of star formation, and pure N-body simulations of gas-free star clusters. We have implemented this hybrid approach in the SPH code SEREN (Hubber et al. 2011) and perform a series of simple tests to demonstrate the fidelity of the algorithm and its conservation properties. We investigate and present resolution criteria to adequately resolve the density field and to prevent strong numerical scattering effects. Future developments will include a more sophisticated treatment of binaries.
An hybrid RANS/LES model for simulation of complex turbulent flow
Institute of Scientific and Technical Information of China (English)
魏群; 陈红勋; 马峥
2016-01-01
A non-linear eddy viscosity model (NLEVM) and a scalable hybrid Reynolds averaged Navier-Stokes/ large eddy simula- tion (RANS/LES) strategy are developed to improve the capability of the eddy viscosity model (EVM) to simulate complex flows featuring separations and unsteady motions. To study the performance of the NLEVM, numerical simulations around S809 airfoil are carried out and the results show that the NLEVM performs much better when a large separation occurs. Calculated results of the flow around a triangular cylinder show that the NLEVM can improve the precision of the flow fields to some extents, but the error is still considerable, and the small turbulence structures can not be clearly captured as the EVM. Whereas the scalable hybrid RANS/LES model based on the NLEVM is fairly effective on resolving the turbulent structures and can give more satisfactory predictions of the flow fields.
Directory of Open Access Journals (Sweden)
Edris Yousefi Rad
2017-08-01
Full Text Available In the present research, considering the importance of desirable steam turbine design, improvement of numerical modeling of steam two-phase flows in convergent and divergent channels and the blades of transonic steam turbines has been targeted. The first novelty of this research is the innovative use of combined Convective Upstream Pressure Splitting (CUSP and scalar methods to update the flow properties at each calculation point. In other words, each property (density, temperature, pressure and velocity at each calculation point can be computed from either the CUSP or scalar method, depending on the least deviation criterion. For this reason this innovative method is named “hybrid method”. The next novelty of this research is the use of an inverse method alongside the proposed hybrid method to find the amount of the important parameter z in the CUSP method, which is herein referred to as “CUSP’s convergence parameter”. Using a relatively simple computational grid, firstly, five cases with similar conditions to those of the main cases under study in this research with available experimental data were used to obtain the value of z by the Levenberg-Marquardt inverse method. With this innovation, first, an optimum value of z = 2.667 was obtained using the inverse method and then directly used for the main cases considered in the research. Given that the aim is to investigate the two-dimensional, steady state, inviscid and adiabatic modeling of steam nucleating flows in three different nozzle and turbine blade geometries, flow simulation was performed using a relatively simple mesh and the innovative proposed hybrid method (scalar + CUSP, with the desired value of z = 2.667 . A comparison between the results of the hybrid modeling of the three main cases with experimental data showed a very good agreement, even within shock zones, including the condensation shock region, revealing the efficiency of this numerical modeling method innovation
Direct Numerical Simulation of Multiphase Flows with Unstable Interfaces
Schillaci, Eugenio; Lehmkuhl, Oriol; Antepara, Oscar; Oliva, Assensi
2016-09-01
This paper presents a numerical model that intends to simulate efficiently the surface instability that arise in multiphase flows, typically liquid-gas, both for laminar or turbulent regimes. The model is developed on the in-house computing platform TermoFluids, and operates the finite-volume, direct numerical simulation (DNS) of multiphase flows by means of a conservative level-set method for the interface-capturing. The mesh size is optimized by means of an adaptive mesh refinement (AMR) strategy, that allows the dynamic re-concentration of the mesh in the vicinity of the interfaces between fluids, in order to correctly represent the diverse structures (as ligaments and droplets) that may rise from unstable phenomena. In addition, special attention is given to the discretization of the various terms of the momentum equations, to ensure stability of the flow and correct representation of turbulent vortices. As shown, the method is capable of truthfully simulate the interface phenomena as the Kelvin-Helmholtz instability and the Plateau-Rayleigh instability, both in the case of 2-D and 3-D configurations. Therefore it is suitable for the simulation of complex phenomena such as simulation of air-blast atomization, with several important application in the field of automotive and aerospace engines. A prove is given by our preliminary study of the 3-D coaxial liquid-gas jet.
Numerical simulation and experimental investigation of incremental sheet forming process
Institute of Scientific and Technical Information of China (English)
HAN Fei; MO Jian-hua
2008-01-01
In order to investigate the process of incremental sheet forming (ISF) through both experimental and numerical approaches, a three-dimensional elasto-plastic finite element model (FEM) was developed to simulate the process and the simulated results were compared with those of experiment. The results of numerical simulations, such as the strain history and distribution, the stress state and distribution, sheet thickness distribution, etc, were discussed in details, and the influences of process parameters on these results were also analyzed. The simulated results of the radial strain and the thickness distribution are in good agreement with experimental results. The simulations reveal that the deformation is localized around the tool and constantly remains close to a plane strain state. With decreasing depth step, increasing tool diameter and wall inclination angle, the axial stress reduces, leading to less thinning and more homogeneous plastic strain and thickness distribution. During ISF, the plastic strain increases stepwise under the action of the tool. Each increase in plastic strain is accompanied by hydrostatic pressure, which explains why obtainable deformation using ISF exceeds the forming limits of conventional sheet forming.
Numerical simulation of internal reconnection event in spherical tokamak
Energy Technology Data Exchange (ETDEWEB)
Hayashi, Takaya; Mizuguchi, Naoki; Sato, Tetsuya [National Inst. for Fusion Science, Toki, Gifu (Japan)
1999-07-01
Three-dimensional magnetohydrodynamic simulations are executed in a full toroidal geometry to clarify the physical mechanisms of the Internal Reconnection Event (IRE), which is observed in the spherical tokamak experiments. The simulation results reproduce several main properties of IRE. Comparison between the numerical results and experimental observation indicates fairly good agreements regarding nonlinear behavior, such as appearance of localized helical distortion, appearance of characteristic conical shape in the pressure profile during thermal quench, and subsequent appearance of the m=2/n=1 type helical distortion of the torus. (author)
Direct numerical simulations of gas-liquid multiphase flows
Tryggvason, Grétar; Zaleski, Stéphane
2011-01-01
Accurately predicting the behaviour of multiphase flows is a problem of immense industrial and scientific interest. Modern computers can now study the dynamics in great detail and these simulations yield unprecedented insight. This book provides a comprehensive introduction to direct numerical simulations of multiphase flows for researchers and graduate students. After a brief overview of the context and history the authors review the governing equations. A particular emphasis is placed on the 'one-fluid' formulation where a single set of equations is used to describe the entire flow field and
Numerical Simulations and Diagnostics in Astrophysics:. a Few Magnetohydrodynamics Examples
Peres, Giovanni; Bonito, Rosaria; Orlando, Salvatore; Reale, Fabio
2007-12-01
We discuss some issues related to numerical simulations in Astrophysics and, in particular, to their use both as a theoretical tool and as a diagnostic tool, to gain insight into the physical phenomena at work. We make our point presenting some examples of Magneto-hydro-dynamic (MHD) simulations of astrophysical plasmas and illustrating their use. In particular we show the need for appropriate tools to interpret, visualize and present results in an adequate form, and the importance of spectral synthesis for a direct comparison with observations.
Numerical Simulation and Innovation on Magnesium Reduction Process
Institute of Scientific and Technical Information of China (English)
Dehong XIA; Gang ZHANG; Liang GUO
2006-01-01
The thermal process of L.M.Pidgeon's reduction art, widely used in magnesium production, is numerically simulated. It is shown that the thermal efficiency will be highly enhanced with the increase of heat-exchange area or the intensification of heat exchange between flame and the outer surface of the reduction jars. An innovation has been made by fuel-shifting (from coal to Coal-Water Mixture), up-draft reduction furnace configuration,multi-layer jars installation and waste heat recovery. A bench scale furnace has been constructed and put into operation to identify the simulation and new design.
Numerical simulation of transient operation of loop heat pipes
Energy Technology Data Exchange (ETDEWEB)
Kaya, T. [Carleton University, Department of Mechanical and Aerospace Engineering, 1125 Colonel By Drive, Ottawa, Ontario, K1S 5B6 (Canada)], E-mail: tkaya@mae.carleton.ca; Perez, R.; Gregori, C.; Torres, A. [IberEspacio, Tecnologia Aeroespacial, Magallanes, 1, 28015 Madrid (Spain)
2008-06-15
A numerical model is developed to simulate the transient performance characteristics of loop heat pipes (LHP). The model satisfactorily simulates the overall dynamic behavior of an LHP unit tested under ambient and vacuum environments. The startup phase is also reproduced using the experimentally obtained incipient wall superheat. The accurate heat leak predictions at low powers remain problematic and experimental correlation is necessary. The model can be used to analyze the dynamic behavior of an LHP based thermal control system exposed to transient thermal loads.
Numerical simulations of thin accretion discs with PLUTO
Parthasarathy, Varadarajan
2014-01-01
Our goal is to perform global simulations of thin accretion discs around compact bodies like neutron stars with dipolar magnetic profile and black holes by exploiting the facilities provided by state-of-the-art grid-based, high resolution shock capturing (HRSC) and finite volume codes. We have used the Godunov-type code PLUTO to simulate a thin disc around a compact object prescribed with a pseudo-Newtonian potential in a purely hydrodynamical (HD) regime, with numerical viscosity as a first step towards achieving our goal as mentioned above.
Numerical Simulation of Cast Distortion in Gas Turbine Engine Components
Inozemtsev, A. A.; Dubrovskaya, A. S.; Dongauser, K. A.; Trufanov, N. A.
2015-06-01
In this paper the process of multiple airfoilvanes manufacturing through investment casting is considered. The mathematical model of the full contact problem is built to determine stress strain state in a cast during the process of solidification. Studies are carried out in viscoelastoplastic statement. Numerical simulation of the explored process is implemented with ProCASTsoftware package. The results of simulation are compared with the real production process. By means of computer analysis the optimization of technical process parameters is done in order to eliminate the defect of cast walls thickness variation.
YBCO melt-processing development by numerical simulation
Energy Technology Data Exchange (ETDEWEB)
Schmitz, G.J.; Nestler, B.; Seesselberg, M. [ACCESS e.V. Materials Sciences, Aachen (Germany)
1996-12-01
Numerical simulations provide a suitable tool to investigate and support the upscaling of melt growth especially of high T{sub c} superconductors. On the macroscopic scale calculations of thermal fields in the YBCO bulk during melt growth were performed. Mesoscopic simulations of the evolution of the microstructure have been made using the phase field method. These results are discussed in relation to experimental results obtained from the real YBCO system. Implications for a possible enhancement of production rates for YBCO bulk material and for tapes are outlined.
Numerical simulation and mechanism analysis of freak waves
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
A numerical wave model based on the modified fourth-order nonlinear Schroe dinger equation (mNLSE) in deep water was developed to simulate the formation of freak waves and a standard split-step, pseudo-spectral method was used to solve the equation. The validation of the model is firstly verified, then the simulation of freak waves was performed by changing sideband conditions, and the variation of wave energy was also analyzed in the evolution. The results indicate that Benjamin-Feir instability (sideband instability) is an important mechanism for freak wave formation.
Numerical studies towards practical large-eddy simulation
Institute of Scientific and Technical Information of China (English)
J. Boudet; J. Caro; L. Shao; E. Lévêque
2007-01-01
Large-eddy simulation developments and validations are presented for an improved simulation of turbulent internal flows. Numerical methods are proposed according to two competing criteria: numerical qualities (precision and spectral characteristics), and adaptability to complex configurations. First, methods are tested on academic test-cases, in order to abridge with fundamental studies. Consistent results are obtained using adaptable finite volume method, with higher order advection fluxes, implicit grid filtering and "low-cost" shear-improved Smagorinsky model. This analysis particularly focuses on mean flow, fluctuations, two-point correlations and spectra.Moreover, it is shown that exponential averaging is a promising tool for LES implementation in complex geometry with deterministic unsteadiness. Finally, adaptability of the method is demonstrated by application to a configuration representative of blade-tip clearance flow in a turbomachine.
Numerical simulations of a diode laser BPH treatment system
Energy Technology Data Exchange (ETDEWEB)
Esch, V; London, R A; Papademetriou, S
1999-02-23
Numerical simulations are presented of the laser-tissue interaction of a diode laser system for treating benign prostate hyperplasia. The numerical model includes laser light transport, heat transport, cooling due to blood perfusion, thermal tissue damage, and enthalpy of tissue damage. Comparisons of the simulation results to clinical data are given. We report that a reasonable variation from a standard set of input data produces heating times which match those measured in the clinical trials. A general trend of decreasing damage volume with increasing heating time is described. We suggest that the patient-to- patient variability seen in the data can be explained by differences in fundamental biophysical properties such as the optical coefficients. Further work is identified, including the measurement and input to the model of several specific data parameters such as optical coefficients, blood perfusion cooling rate, and coagulation rates.
Numerical Relativity Simulations for Black Hole Merger Astrophysics
Baker, John G.
2010-01-01
Massive black hole mergers are perhaps the most energetic astronomical events, establishing their importance as gravitational wave sources for LISA, and also possibly leading to observable influences on their local environments. Advances in numerical relativity over the last five years have fueled the development of a rich physical understanding of general relativity's predictions for these events. Z will overview the understanding of these event emerging from numerical simulation studies. These simulations elucidate the pre-merger dynamics of the black hole binaries, the consequent gravitational waveform signatures ' and the resulting state, including its kick velocity, for the final black hole produced by the merger. Scenarios are now being considered for observing each of these aspects of the merger, involving both gravitational-wave and electromagnetic astronomy.
3D numerical simulation and analysis of railgun gouging mechanism
Institute of Scientific and Technical Information of China (English)
Jin-guo WU; Bo TANG; Qing-hua LIN; Hai-yuan LI; Bao-ming LI
2016-01-01
A gouging phenomenon with a hypervelocity sliding electrical contact in railgun not only shortens the rail lifetime but also affects the interior ballistic performance. In this paper, a 3-D numerical model was introduced to simulate and analyze the generation mechanism and evolution of the rail gouging phenomenon. The results show that a rail surface bulge is an important factor to induce gouging. High density and high pressure material flow on the contact surface, obliquely extruded into the rail when accelerating the armature to a high velocity, can produce gouging. Both controlling the bulge size to a certain range and selecting suitable materials for rail surface coating will suppress the formation of gouging. The numerical simulation had a good agreement with experiments, which validated the computing model and methodology are reliable.
Three-dimensional numerical simulation during laser processing of CFRP
Ohkubo, Tomomasa; Sato, Yuji; Matsunaga, Ei-ichi; Tsukamoto, Masahiro
2017-09-01
We performed three-dimensional numerical simulation about laser processing of carbon-fiber-reinforced plastic (CFRP) using OpenFOAM as libraries of finite volume method (FVM). Although a little theoretical or numerical studies about heat affected zone (HAZ) formation were performed, there is no research discussing how HAZ is generated considering time development about removal of each material. It is important to understand difference of removal speed of carbon fiber and resin in order to improve quality of cut surface of CFRP. We demonstrated how the carbon fiber and resin are removed by heat of ablation plume by our simulation. We found that carbon fiber is removed faster than resin at first stage because of the difference of thermal conductivity, and after that, the resin is removed faster because of its low combustion temperature. This result suggests the existence of optimal contacting time of the laser ablation and kerf of the target.
Direct numerical simulation of double-diffusive gravity currents
Penney, Jared; Stastna, Marek
2016-08-01
This paper presents three-dimensional direct numerical simulations of laboratory-scale double-diffusive gravity currents. Flow is governed by the incompressible Navier-Stokes equations under the Boussinesq approximation, with salinity and temperature coupled to the equations of motion using a nonlinear approximation to the UNESCO equation of state. The effects of vertical boundary conditions and current volume are examined, with focus on flow pattern development, current propagation speed, three-dimensionalization, dissipation, and stirring and mixing. It was observed that no-slip boundaries cause the gravity current head to take the standard lobe-and-cleft shape and encourage both a greater degree and an earlier onset of three-dimensionalization when compared to what occurs in the case of a free-slip boundary. Additionally, numerical simulations with no-slip boundary conditions experience greater viscous dissipation, stirring, and mixing when compared to similar configurations using free-slip conditions.
Numerical simulation of interfacial reaction between titanium and zirconia
Directory of Open Access Journals (Sweden)
Liu Aihui
2010-11-01
Full Text Available Based on the conservation laws of energy and mass, and taking into account the effect of chemical reaction between liquid titanium and zirconia ceramic mold on the concentration field and the temperature field, a comprehensive mathematical model for numerical simulation of heat and mass transfer has been established to study the interfacial reaction between liquid Ti and ZrO2 ceramic mold. With the proposed model, numerical simulations were preformed to investigate the effects of pouring temperature and holding time on the oxygen concentrations and reactive layer thickness in metal. The results showed that both the oxygen concentration and the thickness of reactive layer in metal increase with the increase of the holding time and the pouring temperature. The development of reactive layer thickness with time consists of three stages: inoculation (0-1 s, linear increase (1-5 s and parabolic increase (after 5 s.
Numerical Relativity Simulations for Black Hole Merger Astrophysics
Baker, John G.
2010-01-01
Massive black hole mergers are perhaps the most energetic astronomical events, establishing their importance as gravitational wave sources for LISA, and also possibly leading to observable influences on their local environments. Advances in numerical relativity over the last five years have fueled the development of a rich physical understanding of general relativity's predictions for these events. Z will overview the understanding of these event emerging from numerical simulation studies. These simulations elucidate the pre-merger dynamics of the black hole binaries, the consequent gravitational waveform signatures ' and the resulting state, including its kick velocity, for the final black hole produced by the merger. Scenarios are now being considered for observing each of these aspects of the merger, involving both gravitational-wave and electromagnetic astronomy.
Numerical Simulation on Stratified Flow over an Isolated Mountain Ridge
Institute of Scientific and Technical Information of China (English)
LI Ling; Shigeo Kimura
2007-01-01
The characteristics of stratified flow over an isolated mountain ridge have been investigated numerically. The two-dimensional model equations, based on the time-dependent Reynolds averaged NavierStokes equations, are solved numerically using an implicit time integration in a fitted body grid arrangement to simulate stratified flow over an isolated ideally bell-shaped mountain. The simulation results are in good agreement with the existing corresponding analytical and approximate solutions. It is shown that for atmospheric conditions where non-hydrostatic effects become dominant, the model is able to reproduce typical flow features. The dispersion characteristics of gaseous pollutants in the stratified flow have also been studied. The dispersion patterns for two typical atmospheric conditions are compared. The results show that the presence of a gravity wave causes vertical stratification of the pollutant concentration and affects the diffusive characteristics of the pollutants.
Numerical Simulation for the 16 August 1999 EUV Brightenings
Institute of Scientific and Technical Information of China (English)
SHA Xiao-ming; FAN Quan-lin
2008-01-01
The 16 August 1999 EUV brightenings are numerically simulated by a third-order upwind compact scheme,basing on the TRACE observation.The present simulation call give a possible explanation to its formation and evolution.The numerical results show that the initial reconnection jets at around X-point are responsible for the occurrence of EUV brightening.The strong and superposed ejections caused by the first and second coalescence of magnetic islands are possibly related to the lifted material which initially appeared as absorption features and Later EUV-emitting structures respectively.The bi-directional reconnection jets may correspond to the lifted material that either continued to move upward along the apparently open field lines or fell down to the surface.
Lattice Boltzmann Numerical Simulation of a Circular Cylinder
Institute of Scientific and Technical Information of China (English)
冯士德; 赵颖; 郜宪林; 季仲贞
2002-01-01
The lattice Boltzmann equation (LBE) model based on the Boltzmann equation is suitable for the numerical simulation of various flow fields. The fluid dynamics equation can be recovered from the LBE model. However,compared to the Navier-Stokes transport equation, the fluid dynamics equation derived from the LBE model is somewhat different in the viscosity transport term, which contains not only the Navier-Stokes transport equation but also nonsteady pressure and momentum flux terms. The two nonsteady terms can produce the same function as the random stirring force term introduced in the direct numerical or large-eddy vortex simulation of turbulence.Through computation of a circular cylinder, it is verified that the influence of the two nonsteady terms on flow field stability cannot be ignored, which is helpful for the study of turbulence.
GPU accelerated numerical simulations of viscoelastic phase separation model.
Yang, Keda; Su, Jiaye; Guo, Hongxia
2012-07-05
We introduce a complete implementation of viscoelastic model for numerical simulations of the phase separation kinetics in dynamic asymmetry systems such as polymer blends and polymer solutions on a graphics processing unit (GPU) by CUDA language and discuss algorithms and optimizations in details. From studies of a polymer solution, we show that the GPU-based implementation can predict correctly the accepted results and provide about 190 times speedup over a single central processing unit (CPU). Further accuracy analysis demonstrates that both the single and the double precision calculations on the GPU are sufficient to produce high-quality results in numerical simulations of viscoelastic model. Therefore, the GPU-based viscoelastic model is very promising for studying many phase separation processes of experimental and theoretical interests that often take place on the large length and time scales and are not easily addressed by a conventional implementation running on a single CPU.
Numerical Relativity Towards Simulations of 3D Black Hole Coalescence
Seidel, E
1998-01-01
I review recent developments in numerical relativity, focussing on progress made in 3D black hole evolution. Progress in development of black hole initial data, apparent horizon boundary conditions, adaptive mesh refinement, and characteristic evolution is highlighted, as well as full 3D simulations of colliding and distorted black holes. For true 3D distorted holes, with Cauchy evolution techniques, it is now possible to extract highly accurate, nonaxisymmetric waveforms from fully nonlinear simulations, which are verified by comparison to pertubration theory, and with characteristic techniques extremely long term evolutions of 3D black holes are now possible. I also discuss a new code designed for 3D numerical relativity, called Cactus, that will be made public.
Numerical simulation of draft tube flow of a bulb turbine
Energy Technology Data Exchange (ETDEWEB)
Coelho, J.G. [Federal University of Triangulo Mineiro, Institute of Technological and Exact Sciences, Avenida Doutor Randolfo Borges Junior, 1250 – Uberaba – MG (Brazil); Brasil, A.C.P. Jr. [University of Brasilia, Department of Mechanical Engineering, Campus Darcy Ribeiro, Brasilia – DF (Brazil)
2013-07-01
In this work a numerical study of draft tube of a bulb hydraulic turbine is presented, where a new geometry is proposed. This new proposal of draft tube has the unaffected ratio area, a great reduction in his length and approximately the same efficiency of the draft tube conventionally used. The numerical simulations were obtained in commercial software of calculation of flow (CFX-14), using the turbulence model SST, that allows a description of the field fluid dynamic near to the wall. The simulation strategy has an intention of identifying the stall of the boundary layer precisely limits near to the wall and recirculations in the central part, once those are the great causes of the decrease of efficiency of a draft tube. Finally, it is obtained qualitative and quantitative results about the flow in draft tubes.
3D numerical simulation and analysis of railgun gouging mechanism
Directory of Open Access Journals (Sweden)
Jin-guo Wu
2016-04-01
Full Text Available A gouging phenomenon with a hypervelocity sliding electrical contact in railgun not only shortens the rail lifetime but also affects the interior ballistic performance. In this paper, a 3-D numerical model was introduced to simulate and analyze the generation mechanism and evolution of the rail gouging phenomenon. The results show that a rail surface bulge is an important factor to induce gouging. High density and high pressure material flow on the contact surface, obliquely extruded into the rail when accelerating the armature to a high velocity, can produce gouging. Both controlling the bulge size to a certain range and selecting suitable materials for rail surface coating will suppress the formation of gouging. The numerical simulation had a good agreement with experiments, which validated the computing model and methodology are reliable.
Numerical simulation of droplet evaporation between two circular plates
Energy Technology Data Exchange (ETDEWEB)
Bam, Hang Jin; Son, Gi Hun [Sogang University, Seoul (Korea, Republic of)
2015-06-15
Numerical simulation is performed for droplet evaporation between two circular plates. The flow and thermal characteristics of the droplet evaporation are numerically investigated by solving the conservation equations of mass, momentum, energy and mass fraction in the liquid and gas phases. The liquid-gas interface is tracked by a sharp-interface level-set method which is modified to include the effects of evaporation at the liquid-gas interface and contact angle hysteresis at the liquid-gas-solid contact line. An analytical model to predict the droplet evaporation is also developed by simplifying the mass and vapor fraction equations in the gas phase. The numerical results demonstrate that the 1-D analytical prediction is not applicable to the high rate evaporation process. The effects of plate gap and receding contact angle on the droplet evaporation are also quantified.
Direct numerical simulation of the dynamics of sliding rough surfaces
Dang, Viet Hung; Scheibert, Julien; Bot, Alain Le
2013-01-01
The noise generated by the friction of two rough surfaces under weak contact pressure is usually called roughness noise. The underlying vibration which produces the noise stems from numerous instantaneous shocks (in the microsecond range) between surface micro-asperities. The numerical simulation of this problem using classical mechanics requires a fine discretization in both space and time. This is why the finite element method takes much CPU time. In this study, we propose an alternative numerical approach which is based on a truncated modal decomposition of the vibration, a central difference integration scheme and two algorithms for contact: The penalty algorithm and the Lagrange multiplier algorithm. Not only does it reproduce the empirical laws of vibration level versus roughness and sliding speed found experimentally but it also provides the statistical properties of local events which are not accessible by experiment. The CPU time reduction is typically a factor of 10.
Numerical model for learning concepts of streamflow simulation
DeLong, L.L.; ,
1993-01-01
Numerical models are useful for demonstrating principles of open-channel flow. Such models can allow experimentation with cause-and-effect relations, testing concepts of physics and numerical techniques. Four PT is a numerical model written primarily as a teaching supplement for a course in one-dimensional stream-flow modeling. Four PT options particularly useful in training include selection of governing equations, boundary-value perturbation, and user-programmable constraint equations. The model can simulate non-trivial concepts such as flow in complex interconnected channel networks, meandering channels with variable effective flow lengths, hydraulic structures defined by unique three-parameter relations, and density-driven flow.The model is coded in FORTRAN 77, and data encapsulation is used extensively to simplify maintenance and modification and to enhance the use of Four PT modules by other programs and programmers.
Nonlinear numerical simulation on extreme-wave kinematics
Institute of Scientific and Technical Information of China (English)
NING Dezhi; TENG Bin; LIU Shuxue
2009-01-01
A fully nonlinear numerical model based on a time-domain higher-order boundary element method (HOBEM) is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is "adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.
A Hybrid Model for Smoke Simulation
Institute of Scientific and Technical Information of China (English)
童若锋; 董金祥
2002-01-01
A smoke simulation approach based on the integration of traditional particlesystems and density functions is presented in this paper. By attaching a density function toeach particle as its attribute, the diffusion of smoke can be described by the variation of parti-cles' density functions, along with the effect on airflow by controlling particles' movement andfragmentation. In addition, a continuous density field for realistic rendering can be generatedquickly through the look-up tables of particle's density functions. Compared with traditionalparticle systems, this approach can describe smoke diffusion, and provide a continuous densityfield for realistic rendering with much less computation. A quick rendering scheme is also pre-sented in this paper as a useful preview tool for tuning appropriate parameters in the smokemodel.
Hybrid simulation of electron cyclotron resonance heating
Ropponen, T; Suominen, P; Koponen, T K; Kalvas, T; Koivisto, H
2008-01-01
Electron Cyclotron Resonance (ECR) heating is a fundamentally important aspect in understanding the physics of Electron Cyclotron Resonance Ion Sources (ECRIS). Absorption of the radio frequency (RF) microwave power by electron heating in the resonance zone depends on many parameters including frequency and electric field strength of the microwave, magnetic field structure and electron and ion density profiles. ECR absorption has been studied in the past by e.g. modelling electric field behaviour in the resonance zone and its near proximity. This paper introduces a new ECR heating code that implements damping of the microwave power in the vicinity of the resonance zone, utilizes electron density profiles and uses right hand circularly polarized (RHCP) electromagnetic waves to simulate electron heating in ECRIS plasma.
Battery thermal models for hybrid vehicle simulations
Pesaran, Ahmad A.
This paper summarizes battery thermal modeling capabilities for: (1) an advanced vehicle simulator (ADVISOR); and (2) battery module and pack thermal design. The National Renewable Energy Laboratory's (NREL's) ADVISOR is developed in the Matlab/Simulink environment. There are several battery models in ADVISOR for various chemistry types. Each one of these models requires a thermal model to predict the temperature change that could affect battery performance parameters, such as resistance, capacity and state of charges. A lumped capacitance battery thermal model in the Matlab/Simulink environment was developed that included the ADVISOR battery performance models. For thermal evaluation and design of battery modules and packs, NREL has been using various computer aided engineering tools including commercial finite element analysis software. This paper will discuss the thermal ADVISOR battery model and its results, along with the results of finite element modeling that were presented at the workshop on "Development of Advanced Battery Engineering Models" in August 2001.
Managing resource capacity using hybrid simulation
Ahmad, Norazura; Ghani, Noraida Abdul; Kamil, Anton Abdulbasah; Tahar, Razman Mat
2014-12-01
Due to the diversity of patient flows and interdependency of the emergency department (ED) with other units in hospital, the use of analytical models seems not practical for ED modeling. One effective approach to study the dynamic complexity of ED problems is by developing a computer simulation model that could be used to understand the structure and behavior of the system. Attempts to build a holistic model using DES only will be too complex while if only using SD will lack the detailed characteristics of the system. This paper discusses the combination of DES and SD in order to get a better representation of the actual system than using either modeling paradigm solely. The model is developed using AnyLogic software that will enable us to study patient flows and the complex interactions among hospital resources for ED operations. Results from the model show that patients' length of stay is influenced by laboratories turnaround time, bed occupancy rate and ward admission rate.
Hybrid simulation of electron cyclotron resonance heating
Energy Technology Data Exchange (ETDEWEB)
Ropponen, T. [Department of Physics, University of Jyvaeskylae, P.O. Box 35, FI-40014 (Finland)], E-mail: tommi.ropponen@phys.jyu.fi; Tarvainen, O. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Suominen, P. [CERN Geneve 23, CH-1211 (Switzerland); Koponen, T.K. [Department of Physics, University of Jyvaeskylae, Nanoscience Center, P.O. Box 35, FI-40014 (Finland); Kalvas, T.; Koivisto, H. [Department of Physics, University of Jyvaeskylae, P.O. Box 35, FI-40014 (Finland)
2008-03-11
Electron Cyclotron Resonance (ECR) heating is a fundamentally important aspect in understanding the physics of Electron Cyclotron Resonance Ion Sources (ECRIS). Absorption of the radio frequency (RF) microwave power by electron heating in the resonance zone depends on many parameters including frequency and electric field strength of the microwave, magnetic field structure and electron and ion density profiles. ECR absorption has been studied in the past by e.g. modelling electric field behaviour in the resonance zone and its near proximity. This paper introduces a new ECR heating code that implements damping of the microwave power in the vicinity of the resonance zone, utilizes electron density profiles and uses right hand circularly polarized (RHCP) electromagnetic waves to simulate electron heating in ECRIS plasma.
MODELING AND NUMERICAL SIMULATION OF SOLAR HYBRID POWER PLANT
Directory of Open Access Journals (Sweden)
IMAD EDDINE MERICHE
2014-12-01
The main objective of the study is to give a thermodynamic and economic analysis, and assess the feasibility of the installation for the climatic conditions in Béchar area, located in the south of Algeria.
Numerical Simulation of Spectral Response for 650 nm Silicon Photodetector
Institute of Scientific and Technical Information of China (English)
无
2003-01-01
The theoretical spectral response formula of the N+-N-I-P+ silicon photodetector with high/low emission junction is given. At the same time, considering the process requirements, the optimum structure parameters of silicon photodetector are obtained by numerical calculation and simulation. Under the condition of these optimum structure parameters, the responsivity of the silicon photodetector will be 0.48A/W at 650nm.
Numerical simulation of thin layer coffee drying by control volumes
CIRO-VELÁSQUEZ, HÉCTOR J.; ABUD-CANO, LUIS C.; PÉREZ-ALEGRÍA, LUIS. R.
2011-01-01
The thin layer drying model proposed by Sokhansanj and Bruce (1987) was implemented to model the drying process of parchment coffee beans. A computational model based on a control volume approach was developed to simulate the drying process of parchment coffee. A one dimensional transient analysis was implemented in the radial direction applied to a spherical coffee bean of equivalent radius. The results found that, even though the numerical value for the mass transfer coefficient is a small ...
Numerical Simulations of Settlement of Jet Grouting Columns
Directory of Open Access Journals (Sweden)
Juzwa Anna
2016-03-01
Full Text Available The paper presents the comparison of results of numerical analyses of interaction between group of jet grouting columns and subsoil. The analyses were conducted for single column and groups of three, seven and nine columns. The simulations are based on experimental research in real scale which were carried out by authors. The final goal for the research is an estimation of an influence of interaction between columns working in a group.
Numerical Simulation of thePorous Structure of Biomaterials
Institute of Scientific and Technical Information of China (English)
WANGHui-min; YANYu-hua; LIShi-pu
2004-01-01
Porous biomaterials are widely used as bone replacement materials because of thers high biocompatibility and osteoconductivity property. Understanding of their porous structure (i. e. geometrical and topological characteristic) and studying how to the body fluid flow through them are essential to investigate thed egradation behaviour at the surface-liquid interface. This research develops a numerical model to simulate the porous structure of biomaterials based on the stochastic approach in pore size distribution and interconnectivity.
Direct Numerical Simulation of a Shocked Helium Jet
Energy Technology Data Exchange (ETDEWEB)
Cloutman, L D
2002-02-01
We present direct numerical simulations of a shock tube experiment in which a cylindrical laminar jet of helium doped with biacetyl is injected into air and subjected to a weak shock wave. Computed species distributions in a planar cross section of the jet are compared to planar laser-induced fluorescence (PLIF) images produced by the experiment. The calculations are in excellent agreement with the experimental images. We find that differential diffusion of species is an important feature of this experiment.
Ditching Numerical Simulations: Recent Steps in Industrial Applications
Benítez Montañés, Luis; Climent Máñez, Héctor; Siemann, Martin; Kohlgrueber, Dieter
2012-01-01
Ditching is an aircraft emergency condition that ends with planned impact of the aircraft on water. The high forward velocity in fixed-wing aircraft ditching affects the aircraft dynamics and its structural response due to complex hydrodynamic effects. Therefore, analysis of ditching impact is particularly relevant to satisfy the airworthiness regulations for modern aircraft. Numerical methods for simulating ditching take advantage of the computational capacity allowing industry to deal w...
NUMERICAL SIMULATION FOR LASER BENDING OF SHEET METAL
Institute of Scientific and Technical Information of China (English)
1998-01-01
The new flexible forming technique of sheet metal-laser bending process is numerically simulated by using finite element method of large elastic-plastic deformation. The temperature fields and stress-strain distribution in deformation area are calculated, forming process is described and relationship between bend angle and width of sheet is discussed. It is shown that the calculated values are in good accordance with the experiments.
Multi-Physics Coupling Approaches for Aerospace Numerical Simulations.
Errera, M.; Dugeai, A.; Girodroux-Lavigne, P.; Garaud, J.D.; Poinot, M.; Cerqueira, S.; Chaineray, G.
2011-01-01
International audience; The purpose of this paper is to present coupling strategies for aerospace numerical calculations. In the first part, the basic approach used relies on the partitioned coupling of a finite-volume Navier-Stokes solver and a finite-element solid code. These two separate and independent simulation tools carry out exchanges via a coupling library. Two different applications illustrate the capabilities of this coupling method. The main advantage of this approach is to benefi...
Numerical simulation of internal flow in aerocraft engine
Makida, Mitsumasa; 牧田 光正
1998-01-01
A parallel numerical simulation code for three-dimensional spray combustion in an aircraft combustor has been developed. In this code, the Euler equations are used for the droplet phase assuming a continuous fluid, and the full Navier-Stokes equations are applied for the gas phase. Both phases are connected through mass, momentum and energy exchange equations, and solved simultaneously. The droplet phase has a radius distribution, and is divided into five groups of different initial radius, a...
Advances in the numerical simulation of 3D FSW processes
Agelet de Saracibar Bosch, Carlos; Chiumenti, Michèle; Cervera Ruiz, Miguel; Dialami, Narges; Santiago, Diego de; Lombera, Guillermo
2011-01-01
This work deals with the computational modeling and numerical simulation of 3D Friction Stir Welding (FSW) processes. Eulerian and ALE formulations have been used to solve the quasi-static thermal transient governing equations. Mixed P2/P1/P2+SUPG and subgrid-scale stabilized P1/P1/P1 velocity/pressure/temperature elements have been implemented. Norton-Hoff and Sheppard-Wright rigid thermoplastic material models have been considered. Computational visualization techniques using tracers have b...
Numerical simulations of sunspot rotation driven by magnetic flux emergence
Sturrock, Zoe
2017-01-01
Magnetic flux continually emerges from the Sun, rising through the solar interior, emerging at the photosphere in the form of sunspots and expanding into the atmosphere. Observations of sunspot rotations have been reported for over a century and are often accompanied by solar eruptions and flaring activity. In this thesis, we present 3D numerical simulations of the emergence of twisted flux tubes from the uppermost layers of the solar interior, examining the rotational movements of sunspots i...
NUMERICAL SIMULATIONS OF β-GYRES IN TROPICAL CYCLONES
Institute of Scientific and Technical Information of China (English)
杨洪波; 张铭
2003-01-01
The circulation of β-gyres in tropical cyclones is studied using numerical simulations. As shown in the result, there is clear circulation of β-gyres in the deviation flow field of the middle layer of the model,i.e. there is cyclone current west of the vortex center but anticyclone current east of it. The theory analysis shows that the circulation of β-gyres is formed by the advection of geostrophic vorticity.
Inverse kinematics analysis and numerical control experiment for PRS-XY style hybrid machining tool
Institute of Scientific and Technical Information of China (English)
JIA Dongyong; ZHANG Jianmin; NIU Zhigang; SUN Hongchang
2007-01-01
This paper analyzed the inverse kinematics for the new Parallel rotate slider-X Y axes(PRS-XY)style hybrid machining tool and educed the five axes linkage inverse kinematics transform formula on the basis of the coordinates of the X,Y,Z,A and B virtual axes.The program for the PRS-XY style hybrid machining tool in accordance with the program manner for the common numerical control(NC)machine tool was made.The results of the experiments prove that the inverse kinematics transform formula is correct.
Numerical Simulation of a Planing Vessel at High Speed
Institute of Scientific and Technical Information of China (English)
Yumin Su; Qingtong Chen; Hailong Shen; Wei Lu
2012-01-01
Planing vessels are applied widely in civil and military situations.Due to their high speed,the motion of planning vessels is complex.In order to predict the motion of planning vessels,it is important to analyze the hydrodynamic performance of planning vessels at high speeds.The computational fluid dynamic method (CFD) has been proposed to calculate hydrodynamic performance of planning vessels.However,in most traditional CFD approaches,model tests or empirical formulas are needed to obtain the running attitude of the planing vessels before calculation.This paper presents a new CFD method to calculate hydrodynamic forces of planing vessels.The numerical method was based on Reynolds-Averaged Navier-Stokes (RANS)equations.The volume of fluid (VOF) method and the six-degrees-of-freedom equation were applied.An effective process was introduced to solve the numerical divergence problem in numerical simulation.Compared with experimental results,numerical simulation results indicate that both the running attitude and hydrodynamic performance can be predicted well at high speeds.
Use of Numerical Simulations During Continuous Steel Casting
Directory of Open Access Journals (Sweden)
David DITTEL
2010-12-01
Full Text Available This paper describes numerical modeling of round billets solidification process during continuous steel casting. Emphasis is placed not only on the mathematical nature of transmission events that affect the casting billet (heat conduction, convection and radiation, but also the methods of solving thermal problems (analytical, numerical. The numerical methods are discussed in detail the finite element method and the method of networks that form the core of the most common commercially used simulation software for modeling the temperature fields at various technological processes. In the research was compiled its own sophisticated software - Tefis - solving the problems of temperature fields by using of an explicit (numerical method of networks. The actual solution is implemented using Fourier-Kirchhoff equation in differential form of enthalpy, which includes the velocity of solidified billet. By software Tefis are carried out a series of computer simulations and sensitivity analysis method to examine the effects of different levels of steel in a mould, different casting velocities, different temperatures above the liquidus temperature of steel and different intensity in the secondary cooling zone on the overall temperature field of continuously casted billets. Thus the calculated temperature fields, of declared steel marks, are subsequently confronted with the results of experimental measurements on real operating casting machine.
Reckinger, Scott J.; Livescu, Daniel; Vasilyev, Oleg V.
2016-05-01
An investigation of compressible Rayleigh-Taylor instability (RTI) using Direct Numerical Simulations (DNS) requires efficient numerical methods, advanced boundary conditions, and consistent initialization in order to capture the wide range of scales and vortex dynamics present in the system, while reducing the computational impact associated with acoustic wave generation and the subsequent interaction with the flow. An advanced computational framework is presented that handles the challenges introduced by considering the compressive nature of RTI systems, which include sharp interfacial density gradients on strongly stratified background states, acoustic wave generation and removal at computational boundaries, and stratification dependent vorticity production. The foundation of the numerical methodology described here is the wavelet-based grid adaptivity of the Parallel Adaptive Wavelet Collocation Method (PAWCM) that maintains symmetry in single-mode RTI systems to extreme late-times. PAWCM is combined with a consistent initialization, which reduces the generation of acoustic disturbances, and effective boundary treatments, which prevent acoustic reflections. A dynamic time integration scheme that can handle highly nonlinear and potentially stiff systems, such as compressible RTI, completes the computational framework. The numerical methodology is used to simulate two-dimensional single-mode RTI to extreme late-times for a wide range of flow compressibility and variable density effects. The results show that flow compressibility acts to reduce the growth of RTI for low Atwood numbers, as predicted from linear stability analysis.
The numerical simulation based on CFD of hydraulic turbine pump
Duan, X. H.; Kong, F. Y.; Liu, Y. Y.; Zhao, R. J.; Hu, Q. L.
2016-05-01
As the functions of hydraulic turbine pump including self-adjusting and compensation with each other, it is far-reaching to analyze its internal flow by the numerical simulation based on CFD, mainly including the pressure field and the velocity field in hydraulic turbine and pump.The three-dimensional models of hydraulic turbine pump are made by Pro/Engineer software;the internal flow fields in hydraulic turbine and pump are simulated numerically by CFX ANSYS software. According to the results of the numerical simulation in design condition, the pressure field and the velocity field in hydraulic turbine and pump are analyzed respectively .The findings show that the static pressure decreases systematically and the pressure gradient is obvious in flow area of hydraulic turbine; the static pressure increases gradually in pump. The flow trace is regular in suction chamber and flume without spiral trace. However, there are irregular traces in the turbine runner channels which contrary to that in flow area of impeller. Most of traces in the flow area of draft tube are spiral.
Transient productivity index for numerical well test simulations
Energy Technology Data Exchange (ETDEWEB)
Blanc, G.; Ding, D.Y.; Ene, A. [Institut Francais du Petrole, Pau (France)] [and others
1997-08-01
The most difficult aspect of numerical simulation of well tests is the treatment of the Bottom Hole Flowing (BHF) Pressure. In full field simulations, this pressure is derived from the Well-block Pressure (WBP) using a numerical productivity index which accounts for the grid size and permeability, and for the well completion. This productivity index is calculated assuming a pseudo-steady state flow regime in the vicinity of the well and is therefore constant during the well production period. Such a pseudo-steady state assumption is no longer valid for the early time of a well test simulation as long as the pressure perturbation has not reached several grid-blocks around the well. This paper offers two different solutions to this problem: (1) The first one is based on the derivation of a Numerical Transient Productivity Index (NTPI) to be applied to Cartesian grids; (2) The second one is based on the use of a Corrected Transmissibility and Accumulation Term (CTAT) in the flow equation. The representation of the pressure behavior given by both solutions is far more accurate than the conventional one as shown by several validation examples which are presented in the following pages.
Numerical Homogenization of Jointed Rock Masses Using Wave Propagation Simulation
Gasmi, Hatem; Hamdi, Essaïeb; Bouden Romdhane, Nejla
2014-07-01
Homogenization in fractured rock analyses is essentially based on the calculation of equivalent elastic parameters. In this paper, a new numerical homogenization method that was programmed by means of a MATLAB code, called HLA-Dissim, is presented. The developed approach simulates a discontinuity network of real rock masses based on the International Society of Rock Mechanics (ISRM) scanline field mapping methodology. Then, it evaluates a series of classic joint parameters to characterize density (RQD, specific length of discontinuities). A pulse wave, characterized by its amplitude, central frequency, and duration, is propagated from a source point to a receiver point of the simulated jointed rock mass using a complex recursive method for evaluating the transmission and reflection coefficient for each simulated discontinuity. The seismic parameters, such as delay, velocity, and attenuation, are then calculated. Finally, the equivalent medium model parameters of the rock mass are computed numerically while taking into account the natural discontinuity distribution. This methodology was applied to 17 bench fronts from six aggregate quarries located in Tunisia, Spain, Austria, and Sweden. It allowed characterizing the rock mass discontinuity network, the resulting seismic performance, and the equivalent medium stiffness. The relationship between the equivalent Young's modulus and rock discontinuity parameters was also analyzed. For these different bench fronts, the proposed numerical approach was also compared to several empirical formulas, based on RQD and fracture density values, published in previous research studies, showing its usefulness and efficiency in estimating rapidly the Young's modulus of equivalent medium for wave propagation analysis.
Efficient numerical simulation of heat storage in subsurface georeservoirs
Boockmeyer, A.; Bauer, S.
2015-12-01
The transition of the German energy market towards renewable energy sources, e.g. wind or solar power, requires energy storage technologies to compensate for their fluctuating production. Large amounts of energy could be stored in georeservoirs such as porous formations in the subsurface. One possibility here is to store heat with high temperatures of up to 90°C through borehole heat exchangers (BHEs) since more than 80 % of the total energy consumption in German households are used for heating and hot water supply. Within the ANGUS+ project potential environmental impacts of such heat storages are assessed and quantified. Numerical simulations are performed to predict storage capacities, storage cycle times, and induced effects. For simulation of these highly dynamic storage sites, detailed high-resolution models are required. We set up a model that accounts for all components of the BHE and verified it using experimental data. The model ensures accurate simulation results but also leads to large numerical meshes and thus high simulation times. In this work, we therefore present a numerical model for each type of BHE (single U, double U and coaxial) that reduces the number of elements and the simulation time significantly for use in larger scale simulations. The numerical model includes all BHE components and represents the temporal and spatial temperature distribution with an accuracy of less than 2% deviation from the fully discretized model. By changing the BHE geometry and using equivalent parameters, the simulation time is reduced by a factor of ~10 for single U-tube BHEs, ~20 for double U-tube BHEs and ~150 for coaxial BHEs. Results of a sensitivity study that quantify the effects of different design and storage formation parameters on temperature distribution and storage efficiency for heat storage using multiple BHEs are then shown. It is found that storage efficiency strongly depends on the number of BHEs composing the storage site, their distance and
Numerical simulations of the subsurface structure of sunspots
Rempel, M.; Cheung, M.; Birch, A. C.; Braun, D. C.
2011-12-01
Knowledge of the subsurface magnetic field and flow structure of sunspots is essential for understanding the processes involved in their formation, dynamic evolution and decay. Information on the subsurface structure can be obtained by either direct numerical modeling or helioseismic inversions. Numerical simulations have reached only in recent years the point at which entire sunspots or even active regions can be modeled including all relevant physical processes such as 3D radiative transfer and a realistic equation of state. We present in this talk results from a series of different models: from simulations of individual sunspots (with and without penumbrae) in differently sized computational domains to simulations of the active region formation process (flux emergence). It is found in all models that the subsurface magnetic field fragments on an intermediate scale (larger than the scale of sunspot fine structure such as umbral dots); most of these fragmentations become visible as light bridges or flux separation events in the photosphere. The subsurface field strength is found to be in the 5-10 kG range. The simulated sunspots are surrounded by large scale flows, the most dominant and robust flow component is a deep reaching outflow with an amplitude reaching about 50% of the convective RMS velocity at the respective depth. The simulated sunspots show helioseismic signatures (frequency dependent travel time shifts) similar to those in observed sunspots. On the other hand it is clear from the simulations that these signatures originate in the upper most 2-3 Mm of the convection zone, since only there substantial perturbations of the wave speed are present. The contributions from deeper layers are insignificant, in particular a direct comparison between an 8 Mm and 16 Mm deep simulation leads to indiscernible helioseismic differences. The National Center for Atmospheric Research is sponsored by the National Science Foundation. This work is in part supported
De Marco, Rossana; Marcucci, Maria Federica; Brienza, Daniele; Bruno, Roberto; Consolini, Giuseppe; Perrone, Denise; Valentini, Franceso; Servidio, Sergio; Stabile, Sara; Pezzi, Oreste; Sorriso-Valvo, Luca; Lavraud, Benoit; De Keyser, Johan; Retinò, Alessandro; Fazakerley, Andrew; Wicks, Robert; Vaivads, Andris; Salatti, Mario; Veltri, Pierliugi
2017-04-01
Turbulence Heating ObserveR (THOR) is the first mission devoted to study energization, acceleration and heating of turbulent space plasmas, and designed to perform field and particle measurements at kinetic scales in different near-Earth regions and in the solar wind. Solar Orbiter (SolO), together with Solar Probe Plus, will provide the first comprehensive remote and in situ measurements which are critical to establish the fundamental physical links between the Sun's dynamic atmosphere and the turbulent solar wind. The fundamental process of turbulent dissipation is mediated by physical mechanism that occur at a variety of temporal and spatial scales, and most efficiently at the kinetics scales. Hybrid Vlasov-Maxwell simulations of solar-wind turbulence show that kinetic effects manifest as particle beams, production of temperature anisotropies and ring-like modulations, preferential heating of heavy ions. We use a numerical code able to reproduce the response of a typical electrostatic analyzer of top-hat type starting from velocity distribution functions (VDFs) generated by Hybrid Vlasov-Maxwell (HVM) numerical simulations. Here, we show how optimized particle measurements by top-hat analysers can capture the kinetic features injected by turbulence in the VDFs.
Recognition of wall materials through active thermography coupled with numerical simulations.
Pietrarca, Francesca; Mameli, Mauro; Filippeschi, Sauro; Fantozzi, Fabio
2016-09-01
In the framework of historical buildings, wall thickness as well as wall constituents are not often known a priori, and active IR thermography can be exploited as a nonintrusive method for detecting what kind of material lies beneath the external plaster layer. In the present work, the wall of a historical building is subjected to a heating stimulus, and the surface temperature temporal trend is recorded by an IR camera. A hybrid numerical model is developed in order to simulate the transient thermal response of a wall made of different known materials underneath the plaster layer. When the numerical thermal contrast and the appearance time match with the experimental thermal images, the material underneath the plaster can be qualitatively identified.
Santamaria, Lucia; Whelan, John T
2009-01-01
Recent progress in numerical relativity now allows computation of the binary black hole merger, whereas post-Newtonian and perturbative techniques can be used to model the inspiral and ringdown phases. So far, most gravitational-wave searches have made use of various post-Newtonian-inspired templates to search for signals arising from the coalescence of compact binary objects. Ajith et al have produced hybrid waveforms for non-spinning binary black-hole systems which include the three stages of the coalescence process, and constructed from them phenomenological templates which capture the features of these waveforms in a parametrized form. As a first step towards extending the present inspiral searches to higher-mass binary black-hole systems, we have used these phenomenological waveforms in a search for numerically-simulated signals injected into synthetic LIGO data as part of the NINJA project.
Efficient Hybrid-Spectral Model for Fully Nonlinear Numerical Wave Tank
DEFF Research Database (Denmark)
Christiansen, Torben; Bingham, Harry B.; Engsig-Karup, Allan Peter;
2013-01-01
A new hybrid-spectral solution strategy is proposed for the simulation of the fully nonlinear free surface equations based on potential flow theory. A Fourier collocation method is adopted horisontally for the discretization of the free surface equations. This is combined with a modal Chebyshev T...
Simulation of Hybrid Photovoltaic Solar Assisted Loop Heat Pipe/Heat Pump System
Directory of Open Access Journals (Sweden)
Nannan Dai
2017-02-01
Full Text Available A hybrid photovoltaic solar assisted loop heat pipe/heat pump (PV-SALHP/HP water heater system has been developed and numerically studied. The system is the combination of loop heat pipe (LHP mode and heat pump (HP mode, and the two modes can be run separately or compositely according to the weather conditions. The performances of independent heat pump (HP mode and hybrid loop heat pipe/heat pump (LHP/HP mode were simulated and compared. Simulation results showed that on typical sunny days in spring or autumn, using LHP/HP mode could save 40.6% power consumption than HP mode. In addition, the optimal switchover from LHP mode to HP mode was analyzed in different weather conditions for energy saving and the all-year round operating performances of the system were also simulated. The simulation results showed that hybrid LHP/HP mode should be utilized to save electricity on sunny days from March to November and the system can rely on LHP mode alone without any power consumption in July and August. When solar radiation and ambient temperature are low in winter, HP mode should be used
Institute of Scientific and Technical Information of China (English)
杨阳; 刘静
2011-01-01
热烧蚀破坏是激光辐照过程中最常见且最易发生的现象.为防御激光辐照对壳体的热烧蚀破坏,以现有防护结构为基础提出了一种含液体金属的复合壳体结构,通过在壳体防护结构中设置一种能在常温下处于液体状态的金属材料,借助液体金属材料良好的导热特性及流动性能,在激光辐照时将光斑辐射部位所积聚的大量能量快速疏散,从而达到防护激光武器的目的.为明晰这种含液体金属复合壳体结构的抗激光性能,建立了相应的三维模型,并对其中典型的抗激光辐照过程进行了数值模拟和分析.结果表明,此方法可有效降低激光光斑照射表面的温度,从而延缓壳体发生软化的过程,由此还可实现更强大的抵御激光辐照的能力.新方法可进一步推广至各式反激光防护体系中.%In order to avoid the thermal ablation destruction induced by the laser weapon, a thin layer of liquid metal is sandwiched into the hybrid structure shell. The unique merit of this hybrid structure lies in the excellent characteristics of liquid metal in thermal conductivity and flow to rapidly dissipate the thermal energy accumulated at the radiation spot. To evaluate and understand the practicability of this defensive measure against the intense laser, a comprehensive investigation on the suitability of using liquid metal is performed to sustain the thermal ablation damage. Numerical simulations are performed on three-dimensional heat transfer problems in the composite structure embedded with liquid metal. It is found that the new method can effectively reduce the temperature at the shell surface, which subsequently delays the softening process, and then achieves a powerful ability to withstand the intense laser. The strategy is expected to be useful in a variety of anti-laser systems.
Interrogation of numerical simulation for modeling of flow induced microstructure
Energy Technology Data Exchange (ETDEWEB)
Joseph, D.D. [Univ. of Minnesota, Minneapolis, MN (United States). Dept. of Aerospace Engineering and Mechanics
1994-12-31
This paper summarizes recent efforts using direct numerical simulations to determine microstructural properties of fluidized suspensions of a few particles. The authors have been studying the motions of a few particles in a viscous fluid by direct numerical simulation at moderate values of the Reynolds number in the 100`s. From these simulations, they find the mechanisms which give rise to lateral migration of particles and turn the broad side of long bodies perpendicular to the stream. They find that a viscous ``stagnation`` point is a point on the body where the shear stress vanishes and the pressure is nearly a maximum. They show how the migration is controlled by stagnation and separation points and go further than before in the discussion of Segre-Silberberg effects of cross-streamline migration in two dimensions. They have analyzed the lift off and steady flight of solid capsules in Poiseuille flows. They do a three-dimensional simulation of steady flow at slow speeds and show that the extensional stresses in a viscoelastic flow change the sign of the normal stress which would exist at points of stagnation in a Newtonian fluid, causing the long side of the body to line up with the stream.
A Numerical Simulation of a Plunging Breaking Wave
Adams, Paul; Stephens, Mike; Brucker, Kyle A; O'Shea, Thomas; Dommermuth, Douglas
2009-01-01
This article describes the fluid dynamics video, "A Numerical Simulation of a Plunging Breaking Wave", which was submitted to the gallery of fluid motion at the 2009 APS/DFD conference. The simulation was of a deep-water plunging breaking wave. It was a two-phase calculation which used a Volume of Fluid (VOF) method to simulate the interface between the two immiscible fluids. Surface tension and viscous effects were not considered. The initial wave was generated by applying a spatio-temporal pressure forcing on the free surface. The video shows the 50% isocontour of the volume fraction from several different perspectives. Significant air entrainment is observed as well as the presence of stream-wise vortex structures.
Fluent-based numerical simulation of flow centrifugal fan
Institute of Scientific and Technical Information of China (English)
LI Xian-zhang
2011-01-01
Testing centrifugal fan flow field by physical laboratory is difficult because the testing system is complex and the workload is heavy, and the results observed by naked-eye deviates far from the actual value. To address this problem, the computational fluid dynamics software FLUENT was applied to establish three-dimensional model of the centrifugal fan. The numeral model was verified by comparing simulation data to experimental data. The pressure centrifugal fan and the speed changes in distribution in centrifugal fan was simulated by computational fluid dynamics software FLUENT. The simulation results show that the gas flow velocity in the impeller increases with impeller radius increase. Static pressure gradually increases when gas from the fan access is imported through fan impeller leaving fans.
Numerical Simulation of Electroosmotic Flow near Earthworm Surface
Institute of Scientific and Technical Information of China (English)
Y.Q. Zu; Y.Y. Yan
2006-01-01
The electroosmotic flow near an earthworm surface is simulated numerically to further understand the anti soil adhesion mechanism of earthworm. A lattice Poisson method is employed to solve electric potential and charge distributions in the electric double layer along the earthworm surface. The external electric field is obtained by solving a Laplace equation. The electroosmotic flow controlled by the Navier-Stokes equations with external body force is simulated by the lattice Boltzmann method. A benchmark test shows that accurate electric potential distributions can be obtained by the LPM. The simulation shows that the moving vortices,which probably contribute to anti soil adhesion,are fonned near earthworm body surface by the nonuniform and variational electrical force.
Hygrothermal Numerical Simulation Tools Applied to Building Physics
Delgado, João M P Q; Ramos, Nuno M M; Freitas, Vasco Peixoto
2013-01-01
This book presents a critical review on the development and application of hygrothermal analysis methods to simulate the coupled transport processes of Heat, Air, and Moisture (HAM) transfer for one or multidimensional cases. During the past few decades there has been relevant development in this field of study and an increase in the professional use of tools that simulate some of the physical phenomena that are involved in Heat, Air and Moisture conditions in building components or elements. Although there is a significant amount of hygrothermal models referred in the literature, the vast majority of them are not easily available to the public outside the institutions where they were developed, which restricts the analysis of this book to only 14 hygrothermal modelling tools. The special features of this book are (a) a state-of-the-art of numerical simulation tools applied to building physics, (b) the boundary conditions importance, (c) the material properties, namely, experimental methods for the measuremen...
Numerical Simulation of Random Close Packing with Tetrahedra
Institute of Scientific and Technical Information of China (English)
LI Shui-Xiang; ZHAO Jian; ZHOU Xuan
2008-01-01
The densest packing of tetrahedra is still an unsolved problem.Numerical simulations of random close packing of tetrahedra are carried out with a sphere assembly model and improved relaxation algorithm. The packing density and average contact number obtained for random close packing of regular tetrahedra is 0.6817 and 7.21respectively,while the values of spheres are 0.6435 and 5.95.The simulation demonstrates that tetrahedra can be randomly packed denser than spheres.Random close packings of tetrahedra with a range of height are simulated as well.We find that the regular tetrahedron might be the optimal shape which gives the highest packing density of tetrahedra.
Direct numerical simulations of helical dynamo action: MHD and beyond
Directory of Open Access Journals (Sweden)
D. O. Gómez
2004-01-01
Full Text Available Magnetohydrodynamic dynamo action is often invoked to explain the existence of magnetic fields in several astronomical objects. In this work, we present direct numerical simulations of MHD helical dynamos, to study the exponential growth and saturation of magnetic fields. Simulations are made within the framework of incompressible flows and using periodic boundary conditions. The statistical properties of the flow are studied, and it is found that its helicity displays strong spatial fluctuations. Regions with large kinetic helicity are also strongly concentrated in space, forming elongated structures. In dynamo simulations using these flows, we found that the growth rate and the saturation level of magnetic energy and magnetic helicity reach an asymptotic value as the Reynolds number is increased. Finally, extensions of the MHD theory to include kinetic effects relevant in astrophysical environments are discussed.
Iterative Workflows for Numerical Simulations in Subsurface Sciences
Energy Technology Data Exchange (ETDEWEB)
Chase, Jared M.; Schuchardt, Karen L.; Chin, George; Daily, Jeffrey A.; Scheibe, Timothy D.
2008-07-08
Numerical simulators are frequently used to assess future risks, support remediation and monitoring program decisions, and assist in design of specific remedial actions with respect to groundwater contaminants. Due to the complexity of the subsurface environment and uncertainty in the models, many alternative simulations must be performed, each producing data that is typically post-processed and analyzed before deciding on the next set of simulations Though parts of the process are readily amenable to automation through scientific workflow tools, the larger”research workflow”, is not supported by current tools. We present a detailed use case for subsurface modeling, describe the use case in terms of workflow structure, briefly summarize a prototype that seeks to facilitate the overall modeling process, and discuss the many challenges for building such a comprehensive environment.
Study on the numerical simulation of batch sieving process
Institute of Scientific and Technical Information of China (English)
JIAO Hong-guang; MA Jiao; ZHAO Yue-min; CHEN Lun-jian
2006-01-01
Screening was widely used in many sectors of industry. However, it is rather incomplete to the cognition of the sieving process for us due to the daedal separation process involving interactions of thousands of particulates. To address this problem, two dimensional numerical simulation of batch sieving process was performed by adopting advanced discrete element method (DEM), which is one of the highly nonlinear digitized dynamic simulative methods and can be used to reveal the quantitative change from particle dimension level. DEM simulation results show that the jam phenomena of sieve-plate apertures of the "blinding particles" in the screen feed can be demonstrated vividly and results also reveal that the velocity of particle moving on the screen plate will vary along with the screen length. This conclusion will be helpful to the design and operation of screen.
Numerical integration methods for large-scale biophysical simulations
Chignola, Roberto; Milotti, Edoardo
2009-01-01
Simulations of biophysical systems inevitably include steps that correspond to time integrations of ordinary differential equations. These equations are often related to enzyme action in the synthesis and destruction of molecular species, and in the regulation of transport of molecules into and out of the cell or cellular compartments. Enzyme action is almost invariably modeled with the quasi-steady-state Michaelis-Menten formula or its close relative, the Hill formula: this description leads to systems of equations that may be stiff and hard to integrate, and poses unusual computational challenges in simulations where a smooth evolution is interrupted by the discrete events that mark the cells' lives. This is the case of a numerical model (Virtual Biophysics Lab - VBL) that we are developing to simulate the growth of three-dimensional tumor cell aggregates (spheroids). The program must be robust and stable, and must be able to accept frequent changes in the underlying theoretical model: here we study the app...
Numerical simulation and modeling of combustion in scramjets
Clark, Ryan James
In the last fifteen years the development of a viable scramjet has quickly approached the following long term goals: responsive sub-orbital space access; long-range, prompt global strike; and high-speed transportation. Nonetheless, there are significant challenges that need to be resolved. These challenges include high skin friction drag and high heat transfer rates, inherent to vehicles in sustained, hypersonic flight. Another challenge is sustaining combustion. Numerical simulation and modeling was performed to provide insight into reducing skin friction drag and sustaining combustion. Numerical simulation was used to investigate boundary layer combustion, which has been shown to reduce skin friction drag. The objective of the numerical simulations was to quantify the effect of fuel injection parameters on boundary layer combustion and ultimately on the change in the skin friction coefficient and heat transfer rate. A qualitative analysis of the results suggest that the reduction in the skin friction coefficient depends on multiple parameters and potentially an interaction between parameters. Sustained combustion can be achieved through a stabilized detonation wave. Additionally, stabilizing a detonation wave will yield rapid combustion. This will allow for a shorter and lighter-weight engine system, resulting in less required combustor cooling. A stabilized detonation wave was numerically modeled for various inlet and geometric cases. The effect of fuel concentration, inlet Mach number, and geometric configuration on the stability of a detonation wave was quantified. Correlations were established between fuel concentration, inlet speed, geometric configuration and parameters characterizing the detonation wave. A linear relationship was quantified between the fuel concentration and the parameters characterizing the detonation wave.
Numerical simulation of flow separation control by oscillatory fluid injection
Resendiz Rosas, Celerino
2005-07-01
In this work, numerical simulations of flow separation control are performed. The separation control technique studied is called "synthetic jet actuation". The developed code employs a cell centered finite volume scheme which handles viscous, steady and unsteady compressible turbulent flows. The pulsating zero mass jet flow is simulated by imposing a harmonically varying transpiration boundary condition on the airfoil's surface. Turbulence is modeled with the algebraic model of Baldwin and Lomax. The application of synthetic jet actuators is based in their ability to energize the boundary layer, thereby providing significant increase in the lift coefficient. This has been corroborated experimentally and it is corroborated numerically in this research. The performed numerical simulation investigates the flow over a NACA0015 airfoil. For this flow Re = 9 x 105 and the reduced frequency and momentum coefficient are F + = 1.1 and Cmu = 0.04 respectively. The oscillatory injection takes place at 12.27% chord from the leading edge. A maximum increase in the mean lift coefficient of 93% is predicted by the code. A discrepancy of approximately 10% is observed with corresponding experimental data from the literature. The general trend is, however, well captured. The discrepancy is attributed to the modeling of the injection boundary condition and to the turbulence model. A sensitivity analysis of the lift coefficient to different values of the oscillation parameters is performed. It is concluded that tangential injection, F+ ≈ O(1) and the utilized grid resolution around the site of injection are optimal. Streamline fields obtained for different angles of injection are analyzed. Flow separation and attachment as functions of the injection angle and of the velocity of injection can be observed. It is finally concluded that a reliable numerical tool has been developed which can be utilized as a support tool in the optimization of the synthetic jet operation and in the
Numerical Simulation of Waves Generated by Seafloor Movements
Institute of Scientific and Technical Information of China (English)
无
2008-01-01
Waves generated by vertical seafloor movements are simulated by use of a fully nonlinear two-dimensional numerical wave tank. In the source region, the seafloor lifts to a designated height by a generation function. The numerical tests show that the linear theory is only valid for estimating the wave behaviors induced by the seafloor movements with a small amplitude, and the fully nonlinear numerical model should be adopted in the simulation of the wave generation by the large amplitude seafloor movements. Without the background surface waves, many numerical tests on the stable maximum elevations ηmax0 are carried out by both the linear theory and the fully nonlinear model. The results of two models are compared and analyzed. For the fully nonlinear model, the influences of the amplitudes and the horizontal lengths on ηmax0 are stronger than that of the characteristic duration times. Furthermore, results reveal that there are significant differences between the linear theory and the fully nonlinear model. When the influences of the background surface waves are considered, the corresponding numerical analyses reveal that with the fully nonlinear model the ηmax0 near-linearly varies with the wave amplitudes of the surface waves, and the ηmax0 has significant depndences on the wave lengths and the wave phases of the surface waves. In addition, the differences between the linear theory and the fully nonlinear model are still obvious, and these differences are significantly affected by the wave parameters of the background surface waves, such as the wave amplitude, the wave length and the wave phase.
Numerical simulation and experimental verification of extended source interferometer
Hou, Yinlong; Li, Lin; Wang, Shanshan; Wang, Xiao; Zang, Haijun; Zhu, Qiudong
2013-12-01
Extended source interferometer, compared with the classical point source interferometer, can suppress coherent noise of environment and system, decrease dust scattering effects and reduce high-frequency error of reference surface. Numerical simulation and experimental verification of extended source interferometer are discussed in this paper. In order to provide guidance for the experiment, the modeling of the extended source interferometer is realized by using optical design software Zemax. Matlab codes are programmed to rectify the field parameters of the optical system automatically and get a series of interferometric data conveniently. The communication technique of DDE (Dynamic Data Exchange) was used to connect Zemax and Matlab. Then the visibility of interference fringes can be calculated through adding the collected interferometric data. Combined with the simulation, the experimental platform of the extended source interferometer was established, which consists of an extended source, interference cavity and image collection system. The decrease of high-frequency error of reference surface and coherent noise of the environment is verified. The relation between the spatial coherence and the size, shape, intensity distribution of the extended source is also verified through the analysis of the visibility of interference fringes. The simulation result is in line with the result given by real extended source interferometer. Simulation result shows that the model can simulate the actual optical interference of the extended source interferometer quite well. Therefore, the simulation platform can be used to guide the experiment of interferometer which is based on various extended sources.
An Investigation of a Hybrid Mixing Timescale Model for PDF Simulations of Turbulent Premixed Flames
Zhou, Hua; Kuron, Mike; Ren, Zhuyin; Lu, Tianfeng; Chen, Jacqueline H.
2016-11-01
Transported probability density function (TPDF) method features the generality for all combustion regimes, which is attractive for turbulent combustion simulations. However, the modeling of micromixing due to molecular diffusion is still considered to be a primary challenge for TPDF method, especially in turbulent premixed flames. Recently, a hybrid mixing rate model for TPDF simulations of turbulent premixed flames has been proposed, which recovers the correct mixing rates in the limits of flamelet regime and broken reaction zone regime while at the same time aims to properly account for the transition in between. In this work, this model is employed in TPDF simulations of turbulent premixed methane-air slot burner flames. The model performance is assessed by comparing the results from both direct numerical simulation (DNS) and conventional constant mechanical-to-scalar mixing rate model. This work is Granted by NSFC 51476087 and 91441202.
Utilization of MATLAB in Simulation of Linear Hybrid Circuits
BRANCIK, L.
2003-01-01
In the paper a MATLAB-based method for simulating transient phenomena in linear hybrid circuits containing parts with both lumped and distributed parameters is presented. Distributed parts of the circuit are multiconductor transmission lines, which can generally be nonuniform, with frequency-dependent parameters, and under nonzero initial voltage and/or current distributions. In principle a solution is formulated using the modified nodal analysis method in the frequency domain. Subsequently a...
Directory of Open Access Journals (Sweden)
Zhi Peng Ling
2015-07-01
Full Text Available This paper presents a three-dimensional numerical analysis of homojunction/heterojunction hybrid silicon wafer solar cells, featuring front-side full-area diffused homojunction contacts and rear-side heterojunction point contacts. Their device performance is compared with conventional full-area heterojunction solar cells as well as conventional diffused solar cells featuring locally diffused rear point contacts, for both front-emitter and rear-emitter configurations. A consistent set of simulation input parameters is obtained by calibrating the simulation program with intensity dependent lifetime measurements of the passivated regions and the contact regions of the various types of solar cells. We show that the best efficiency is obtained when a-Si:H is used for rear-side heterojunction point-contact formation. An optimization of the rear contact area fraction is required to balance between the gains in current and voltage and the loss in fill factor with shrinking rear contact area fraction. However, the corresponding optimal range for the rear-contact area fraction is found to be quite large (e.g. 20-60 % for hybrid front-emitter cells. Hybrid rear-emitter cells show a faster drop in the fill factor with decreasing rear contact area fraction compared to front-emitter cells, stemming from a higher series resistance contribution of the rear-side a-Si:H(p+ emitter compared to the rear-side a-Si:H(n+ back surface field layer. Overall, we show that hybrid silicon solar cells in a front-emitter configuration can outperform conventional heterojunction silicon solar cells as well as diffused solar cells with rear-side locally diffused point contacts.
Numerical simulation of microstructure of the GeSi alloy
Energy Technology Data Exchange (ETDEWEB)
Rasin, I.
2006-09-08
The goal of this work is to investigate pattern formation processes on the solid-liquid interface during the crystal growth of GeSi. GeSi crystals with cellular structure have great potential for applications in -ray and neutron optics. The interface patterns induce small quasi-periodic distortions of the microstructure called mosaicity. Existence and properties of this mosaicity are important for the application of the crystals. The properties depend on many factors; this dependence, is currently not known even not qualitatively. A better understanding of the physics near the crystal surface is therefore required, in order to optimise the growth process. There are three main physical processes in this system: phase-transition, diffusion and melt flow. Every process is described by its own set of equations. Finite difference methods and lattice kinetic methods are taken for solving these governing equations. We have developed a modification of the kinetic methods for the advectiondiffusion and extended this method for simulations of non-linear reaction diffusion equations. The phase-field method was chosen as a tool for describing the phase-transition. There are numerous works applied for different metallic alloys. An attempt to apply the method directly to simulation GeSi crystal growth showed that this method is unstable. This instability has not been observed in previous works due to the much smaller scale of simulations. We introduced a modified phase-field scheme, which enables to simulate pattern formation with the scale observed in experiment. A flow in the melt was taken in to account in the numerical model. The developed numerical model allows us to investigate pattern formation in GeSi crystals. Modelling shows that the flow near the crystal surface has impact on the patterns. The obtained patterns reproduce qualitatively and in some cases quantitatively the experimental results. (orig.)
Characteristic of Ion loss as determined by hybrid simulations
Brecht, Stephen H.; Ledvina, Stephen
2016-10-01
One of the major objectives of the MAVEN mission is to determine the loss rate of oxygen ions from the atmosphere of Mars. It is thought that the oxygen ion loss represents a conduit for the loss of water from Mars. However, the actual measurements and estimates of global loss rates are very difficult because one needs an average over many orbits and full coverage of the loss regions of Mars; something that MAVEN will only accomplish with an extended mission. In the meantime global kinetic simulations are an avenue to gain further insight into the loss process and perhaps offer insight into the data analysis that will be performed on the MAVEN data. Hybrid particle codes provide self-consistent simulations of the ion dynamics occurring when the solar wind interacts with Mars.This paper reports the results of HALFSHEL hybrid code simulations of the solar wind interaction with Mars and the subsequent loss of oxygen ions in the form of O+ and O2+. Four simulations were performed representing different orientations of the crustal magnetic fields with the subsolar regions using a solar EUV flux representative of the moderate solar activity experienced by MAVEN. Loss rates will be presented as will evaluations of the distribution functions of the various loss ion species as accumulated at roughly 2 Rm for each of the four simulations. The results will be presented as faces on a box surrounding Mars so that one can evaluate regions such as that of the measured plasma plume. The plume feature has now been measured and is often seen in simulations. Finally, the losses and the subsequent velocity distributions will be compared between the various crustal magnetic field orientations.In summary, results from the HALFSHEL hybrid code will be presented. These results will address characteristics of the oxygen ions lost from Mars as a function of crustal magnetic field orientation. Further, they will be compared with respect to the regions surrounding Mars and the associated
A Hybrid Mutation Chemical Reaction Optimization Algorithm for Global Numerical Optimization
Directory of Open Access Journals (Sweden)
Ransikarn Ngambusabongsopa
2015-01-01
Full Text Available This paper proposes a hybrid metaheuristic approach that improves global numerical optimization by increasing optimal quality and accelerating convergence. This algorithm involves a recently developed process for chemical reaction optimization and two adjustment operators (turning and mutation operators. Three types of mutation operators (uniform, nonuniform, and polynomial were combined with chemical reaction optimization and turning operator to find the most appropriate framework. The best solution among these three options was selected to be a hybrid mutation chemical reaction optimization algorithm for global numerical optimization. The optimal quality, convergence speed, and statistical hypothesis testing of our algorithm are superior to those previous high performance algorithms such as RCCRO, HP-CRO2, and OCRO.
Parallel direct numerical simulation of three-dimensional spray formation
Chergui, Jalel; Juric, Damir; Shin, Seungwon; Kahouadji, Lyes; Matar, Omar
2015-11-01
We present numerical results for the breakup mechanism of a liquid jet surrounded by a fast coaxial flow of air with density ratio (water/air) ~ 1000 and kinematic viscosity ratio ~ 60. We use code BLUE, a three-dimensional, two-phase, high performance, parallel numerical code based on a hybrid Front-Tracking/Level Set algorithm for Lagrangian tracking of arbitrarily deformable phase interfaces and a precise treatment of surface tension forces. The parallelization of the code is based on the technique of domain decomposition where the velocity field is solved by a parallel GMRes method for the viscous terms and the pressure by a parallel multigrid/GMRes method. Communication is handled by MPI message passing procedures. The interface method is also parallelized and defines the interface both by a discontinuous density field as well as by a triangular Lagrangian mesh and allows the interface to undergo large deformations including the rupture and/or coalescence of interfaces. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.
STEM image simulation with hybrid CPU/GPU programming.
Yao, Y; Ge, B H; Shen, X; Wang, Y G; Yu, R C
2016-07-01
STEM image simulation is achieved via hybrid CPU/GPU programming under parallel algorithm architecture to speed up calculation on a personal computer (PC). To utilize the calculation power of a PC fully, the simulation is performed using the GPU core and multi-CPU cores at the same time to significantly improve efficiency. GaSb and an artificial GaSb/InAs interface with atom diffusion have been used to verify the computation. Copyright © 2016 Elsevier B.V. All rights reserved.
Hybrid and electric advanced vehicle systems (heavy) simulation
Hammond, R. A.; Mcgehee, R. K.
1981-01-01
A computer program to simulate hybrid and electric advanced vehicle systems (HEAVY) is described. It is intended for use early in the design process: concept evaluation, alternative comparison, preliminary design, control and management strategy development, component sizing, and sensitivity studies. It allows the designer to quickly, conveniently, and economically predict the performance of a proposed drive train. The user defines the system to be simulated using a library of predefined component models that may be connected to represent a wide variety of propulsion systems. The development of three models are discussed as examples.
Differential Diffusion Effects in Numerical Simulations on Smoke Toxicity Evaluation
Directory of Open Access Journals (Sweden)
Pan Longwei
2016-01-01
Full Text Available With the increasing frequency of fire caused by construction materials, smoke toxicity evaluation plays a key role in related fields. Numerical simulation has become a popular method to predict the toxicity of smoke. A computational study of differential diffusion effects on smoke toxicity evaluation is proposed in this study. Further, an effective Lewis number model derived from the Reynolds-averaged form of the Navier-stokes (RANS transport equations is proposed in turbulent flames. The accuracy of the study is illustrated for a polyurethane foam fire in a 1/5 scale vertical shaft. The temperature and the concentrations of smoke composition are mainly discussed. From the comparison of the calculations with the direct numerical simulations (DNS data it is observed that the temperature and mass fractions of species agree well with the DNS data when differential diffusion effects are taken into account. On the other hand, these numerical results are overestimated if differential diffusion effects are neglected. The FED values indicate that differential diffusion has a strong influence on smoke toxicity evaluation when using N-Gas model.
Progress in numerical simulation of cavitating water jets
Institute of Scientific and Technical Information of China (English)
PENG Guoyi; SHMIZU Seiji
2013-01-01
This paper reviews recent progress made toward modeling of cavitation and numerical simulation of cavitating water jets.Properties of existing cavitation models are discussed and a compressible mixture flow method for the numerical simulation of highspeed water jets accompanied by intensive cavitation is introduced.Two-phase fluids media of cavitating flow are treated as a homogeneous bubbly mixture and the mean flow is computed by solving Reynolds-Averaged Navier-Stokes (RANS) equations for compressible fluid.The intensity of cavitation is evaluated by the gas volume fraction,which is governed by the compressibility of bubble-liquid mixture corresponding to the status of mean flow field.Numerical results of cavitating water jet issuing from an orifice nozzle are presented and its applicability to intensively cavitating jets is demonstrated.However,the effect of impact pressure caused by collapsing of bubbles is neglected,and effectively coupling of the present compressible mixture flow method with the dynamics of bubbles remains to be a challenge.
A Hybrid Analytical-Numerical Solution to the Laminar Flow inside Biconical Ducts
Directory of Open Access Journals (Sweden)
Thiago Antonini Alves
2015-10-01
Full Text Available In this work was presented a hybrid analytical-numerical solution to hydrodynamic problem of fully developed Newtonian laminar flow inside biconical ducts employing the Generalized Integral Transform Technique (GITT. In order to facilitate the analytical treatment and the application of the boundary conditions, a Conformal Transform was used to change the domain into a more suitable coordinate system. Thereafter, the GITT was applied on the momentum equation to obtain the velocity field. Numerical results were obtained for quantities of practical interest, such as maximum and minimum velocity, Fanning friction factor, Poiseuille number, Hagenbach factor and hydrodynamic entry length.
Water and heat fluxes in desert soils: 2. Numerical simulations
Scanlon, Bridget R.; Milly, P. C. D.
1994-03-01
Transient one-dimensional fluxes of soil water (liquid and vapor) and heat in response to 1 year of atmospheric forcing were simulated numerically for a site in the Chihuahuan Desert of Texas. The model was initialized and evaluated using the monitoring data presented in a companion paper (Scanlon, this issue). Soil hydraulic and thermal properties were estimated a priori from a combination of laboratory measurements, models, and other published information. In the first simulation, the main drying curves were used to describe soil water retention, and hysteresis was ignored. Remarkable consistency was found between computed and measured water potentials and temperatures. Attenuation and phase shift of the seasonal cycle of water potentials below the shallow subsurface active zone (0.0- to 0.3-m depth) were similar to those of temperatures, suggesting that water potential fluctuations were driven primarily by temperature changes. Water fluxes in the upper 0.3 m of soil were dominated by downward and upward liquid fluxes that resulted from infiltration of rain and subsequent evaporation from the surface. Upward flux was vapor dominated only in the top several millimeters of the soil during periods of evaporation. Below a depth of 0.3 m, water fluxes varied slowly and were dominated by downward thermal vapor flux that decreased with depth, causing a net accumulation of water. In a second simulation, nonhysteretic water retention was instead described by the estimated main wetting curves; the resulting differences in fluxes were attributed to lower initial water contents (given fixed initial water potential) and unsaturated hydraulic conductivities that were lower than they were in the first simulation. Below a depth of 0.3 m, the thermal vapor fluxes dominated and were similar to those in the first simulation. Two other simulations were performed, differing from the first only in the prescription of different (wetter) initial water potentials. These three simulations
DEFF Research Database (Denmark)
Maghareh, Amin; Waldbjørn, Jacob Paamand; Dyke, Shirley J.;
2016-01-01
Real-time hybrid simulation (RTHS) is a powerful cyber-physical technique that is a relatively cost-effective method to perform global/local system evaluation of structural systems. A major factor that determines the ability of an RTHS to represent true system-level behavior is the fidelity...... it employs different time steps in the numerical and the physical substructures while including rate-transitioning to link the components appropriately. Typically, a higher-order numerical substructure model is solved at larger time intervals, and is coupled with a physical substructure that is driven...... frequency between the numerical and physical substructures and for input signals with high-frequency content. Further, it does not induce signal chattering at the coupling frequency. The effectiveness of AMRI is also verified experimentally....
NUMERICAL SIMULATIONS OF SEA ICE WITH DIFFERENT ADVECTION SCHEMES
Institute of Scientific and Technical Information of China (English)
LIU Xi-ying
2011-01-01
Numerical simulations are carried out for sea ice with four different advection schemes to study their effects on the simulation results.The sea ice model employed here is the Sea Ice Simulator (SIS) of the Geophysical Fluid Dynamics Laboratory (GFDL) Modular Ocean Model version 4b (MOM4b) and the four advection schemes are, the upwind scheme originally used in the SIS, the Multi-Dimensional Positive Advection (MDPA) scheme, the Incremental Remapping Scheme (IRS) and the Two Step Shape Preserving (TSSP) scheme.The latter three schemes are newly introduced.To consider the interactions between sea ice and ocean, a mixed layer ocean model is introduced and coupled to the SIS.The coupled model uses a tri-polar coordinate with 120×65 grids,covering the whole earth globe, in the horizontal plane.Simulation results in the northern high latitudes are analyzed.In all simulations, the model reproduces the seasonal variation of sea ice in the northern high latitudes well.Compared with the results from the observation, the sea ice model produces some extra sea ice coverage in the Greenland Sea and Barents Sea in winter due to the exclusion of ocean current effects and the smaller simulated sea ice thickness in the Arctic basin.There are similar features among the results obtained with the introduced three advection schemes.The simulated sea ice thickness with the three newly introduced schemes are all smaller than that of the upwind scheme and the simulated sea ice velocities of movement are all smaller than that of the upwind scheme.There are more similarities shared in the results obtained with the MPDA and TSSP schemes.