WorldWideScience

Sample records for hybrid materials prepared

  1. Biomolecular hybrid material and process for preparing same and uses for same

    Science.gov (United States)

    Kim, Jungbae [Richland, WA

    2010-11-23

    Disclosed is a composition and method for fabricating novel hybrid materials comprised of, e.g., carbon nanotubes (CNTs) and crosslinked enzyme clusters (CECs). In one method, enzyme-CNT hybrids are prepared by precipitation of enzymes which are subsequently crosslinked, yielding crosslinked enzyme clusters (CECs) on the surface of the CNTs. The CEC-enzyme-CNT hybrids exhibit high activity per unit area or mass as well as improved enzyme stability and longevity over hybrid materials known in the art. The CECs in the disclosed materials permit multilayer biocatalytic coatings to be applied to surfaces providing hybrid materials suitable for use in, e.g., biocatalytic applications and devices as described herein.

  2. Chitosan-nanosilica hybrid materials: Preparation and properties

    Energy Technology Data Exchange (ETDEWEB)

    Podust, T.V., E-mail: tania_list@yahoo.com [Chuiko Institute of Surface Chemistry, 17 General Naumov Street, Kyiv 03164 (Ukraine); Kulik, T.V., E-mail: tanyakulyk@i.ua [Chuiko Institute of Surface Chemistry, 17 General Naumov Street, Kyiv 03164 (Ukraine); Palyanytsya, B.B.; Gun’ko, V.M. [Chuiko Institute of Surface Chemistry, 17 General Naumov Street, Kyiv 03164 (Ukraine); Tóth, A. [Department of Physical Chemistry and Material Science, Budapest University of Technology and Economics, H-1521 Budapest (Hungary); Mikhalovska, L. [School of Pharmacy and Biomolecular Sciences, University of Brighton, Lewes Road, Brighton BN2 4GJ (United Kingdom); Menyhárd, A. [Department of Physical Chemistry and Material Science, Budapest University of Technology and Economics, H-1521 Budapest (Hungary); Institute of Materials Science and Environmental Chemistry, Research Centre for Natural Sciences, Hungarian Academy of Sciences (Hungary); László, K. [Department of Physical Chemistry and Material Science, Budapest University of Technology and Economics, H-1521 Budapest (Hungary)

    2014-11-30

    Highlights: • Hybrid chitosan-nanosilica materials were synthesized using an adsorption modification method. • The chitosan adsorption capacity is higher on the silica/titania and silica/alumina than on the fumed silica. • Nanosilicas undergo structural and textural alterations due to modification by chitosan. • The more severe chitosan thermodestruction occurs on the silica/titania and silica/alumina surfaces than on the plain silica surface. - Abstract: The research focuses on the synthesis of novel organic–inorganic hybrid materials based on polysaccharide chitosan and nanosilicas (SiO{sub 2}, TiO{sub 2}/SiO{sub 2} and Al{sub 2}O{sub 3}/SiO{sub 2}). The chitosan modified nanooxides were obtained by the equilibrium adsorption method. The chitosan adsorption capacities of silica/titania and silica/alumina are higher than of the plain silica due to the additional active sites present on the surfaces of the mixed oxides. The hybrid materials were characterized by low-temperature nitrogen adsorption/desorption, photon correlation spectroscopy (PCS), scanning electron microscopy (SEM), thermogravimetry (TG/DTG) and temperature-programmed desorption with mass spectrometry control (TPD MS) methods. The chitosan treatment only modestly influences the surface area S{sub BET} of the nanooxides but the rearrangement of the secondary and tertiary structures (aggregates and agglomerates) results in an enhancement of the mesoporosity and affects the size of the aggregates. The more severe thermodestruction of the polysaccharide desorbing from the modified mixed silicas indicates a stronger interaction between the chitosan and the mixed oxides compared to the silanol groups of the plain silica surface.

  3. Chitosan-nanosilica hybrid materials: Preparation and properties

    Science.gov (United States)

    Podust, T. V.; Kulik, T. V.; Palyanytsya, B. B.; Gun'ko, V. M.; Tóth, A.; Mikhalovska, L.; Menyhárd, A.; László, K.

    2014-11-01

    The research focuses on the synthesis of novel organic-inorganic hybrid materials based on polysaccharide chitosan and nanosilicas (SiO2, TiO2/SiO2 and Al2O3/SiO2). The chitosan modified nanooxides were obtained by the equilibrium adsorption method. The chitosan adsorption capacities of silica/titania and silica/alumina are higher than of the plain silica due to the additional active sites present on the surfaces of the mixed oxides. The hybrid materials were characterized by low-temperature nitrogen adsorption/desorption, photon correlation spectroscopy (PCS), scanning electron microscopy (SEM), thermogravimetry (TG/DTG) and temperature-programmed desorption with mass spectrometry control (TPD MS) methods. The chitosan treatment only modestly influences the surface area SBET of the nanooxides but the rearrangement of the secondary and tertiary structures (aggregates and agglomerates) results in an enhancement of the mesoporosity and affects the size of the aggregates. The more severe thermodestruction of the polysaccharide desorbing from the modified mixed silicas indicates a stronger interaction between the chitosan and the mixed oxides compared to the silanol groups of the plain silica surface.

  4. Conjugated polymers/semiconductor nanocrystals hybrid materials--preparation, electrical transport properties and applications.

    Science.gov (United States)

    Reiss, Peter; Couderc, Elsa; De Girolamo, Julia; Pron, Adam

    2011-02-01

    This critical review discusses specific preparation and characterization methods applied to hybrid materials consisting of π-conjugated polymers (or oligomers) and semiconductor nanocrystals. These materials are of great importance in the quickly growing field of hybrid organic/inorganic electronics since they can serve as active components of photovoltaic cells, light emitting diodes, photodetectors and other devices. The electronic energy levels of the organic and inorganic components of the hybrid can be tuned individually and thin hybrid films can be processed using low cost solution based techniques. However, the interface between the hybrid components and the morphology of the hybrid directly influences the generation, separation and transport of charge carriers and those parameters are not easy to control. Therefore a large variety of different approaches for assembling the building blocks--conjugated polymers and semiconductor nanocrystals--has been developed. They range from their simple blending through various grafting procedures to methods exploiting specific non-covalent interactions between both components, induced by their tailor-made functionalization. In the first part of this review, we discuss the preparation of the building blocks (nanocrystals and polymers) and the strategies for their assembly into hybrid materials' thin films. In the second part, we focus on the charge carriers' generation and their transport within the hybrids. Finally, we summarize the performances of solar cells using conjugated polymer/semiconductor nanocrystals hybrids and give perspectives for future developments.

  5. Sol-gel Process in Preparation of Organic-inorganic Hybrid Materials

    Directory of Open Access Journals (Sweden)

    Macan, J

    2008-07-01

    Full Text Available Organic-inorganic hybrid materials are a sort of nanostructured material in which the organic and inorganic phases are mixed at molecular level. The inorganic phase in hybrid materials is formed by the sol-gel process, which consists of reactions of hydrolysis and condensation of metal (usually silicon alkoxides. Flexibility of sol-gel process enables creation of hybrid materials with varying organic and inorganic phases in different ratios, and consequently fine-tuning of their properties. In order to obtain true hybrid materials, contact between the phases should be at molecular level, so phase separation between thermodynamically incompatible organic and inorganic phases has to be prevented. Phase interaction can be improved by formation of hydrogen or covalent bonds between them during preparation of hybrid materials. Covalent bond can be introduced by organically modified silicon alkoxides containing a reactive organic group (substituent capable of reacting with the organic phase. In order to obtain hybrid materials with desired structures, a detailed knowledge of hydrolysis and condensation mechanism is necessary. The choice of catalyst, whether acid or base, has the most significant influence on the structure of the inorganic phase. Other important parameters are alkoxide concentration, water: alkoxide ratio, type of alkoxide groups, solvent used, temperature, purity of chemicals used, etc. Hydrolysis and condensation of organically modified silicon alkoxides are additionally influenced by nature and size of the organic supstituent.

  6. Synthesis of organic-inorganic hybrid azobenzene materials for the preparation of nanofibers by electrospinning

    Science.gov (United States)

    Bućko, Aleksandra; Zielińska, Sonia; Ortyl, Ewelina; Larkowska, Maria; Barille, Regis

    2014-12-01

    The new photochromic hybrid materials containing different mole fractions of highly photoactive 4-[(E)-[4-[ethyl(2-hydroxyethyl)amino]phenyl]azo]-N-(4-methylpyrimidin-2-yl)benzenesulfonamide (SMERe) were prepared by a low temperature sol-gel process. The guest-host systems with triethoxyphenylsilane matrix were obtained. These materials were used to form thin transparent films by a spin-coating technique. Then the ability of thin hybrid films to reversible trans-cis photoisomerization under illumination was investigated using ellipsometry and UV-Vis spectroscopy. The reversible changes of refractive index of the films under illumination were in the range of 0.005-0.056. The maximum absorption of these materials was located at 462-486 nm. Moreover, the organic-inorganic azobenzene materials were used to form nanofibers by electrospinning using various parameters of the process. The microstructure of electrospun fibers depended on sols properties (e.g. concentration and viscosity of the sols) and process conditions (e.g. the applied voltage, temperature or type of the collector) at ambient conditions. The morphology of obtained nanofibers was analyzed by an optical microscopy and scanning electron microscopy. In most instances, the beadless fibers were obtained. The wettability of the surface of electrospun fibers deposited on glass substrates was investigated.

  7. THERMALLY CLEAVABLE HYBRID MATERIALS

    Directory of Open Access Journals (Sweden)

    Constantin Gaina

    2011-12-01

    Full Text Available Thermally cleavable hybrid materials were prepared by the Diels-Alder cycloaddition reaction of poly(vinyl furfural to N phenylmaleimido-N’-(triethoxysilylpropylurea followed by the sol-gel condensation reaction of trietoxysilyl groups with water and acetic acid. Thermal and dynamic mechanical analysis, dielectric and FTIR spectroscopy were used to characterize the structure and properties of the composites. The size of the inorganic silica particles in the hybrid material varied dependent on the silica content. The DSC study of the prepared materials revealed that the cleavage process of the formed cycloadducts takes place at temperatures varying between 143-165°C and is an endothermic process.

  8. Porphyrinosilica and metalloporphyrinosilica: hybrid organic-inorganic materials prepared by sol-gel processing

    Directory of Open Access Journals (Sweden)

    YASSUKO IAMAMOTO

    2000-03-01

    Full Text Available New materials porphyrinosilica and metalloporphyrinosilica template have been obtained by a sol-gel processing where functionalyzed porphyrins and metalloporphyrins "building blocks" were assembled into a three-dimensional silicate network. The optimized conditions for preparation of these materials are revised. The monomer precursors porphyrinopropylsilyl and metalloporphyrinopropylsilyl preparation reactions and subsequent one pot sol-gel processing with tetraethoxysilane are discussed. In the case of metalloporphyrins the nitrogen base coordinates to the central metal and acts as a template in the molecular imprinting technique. UV-visible absorption spectroscopy, thermogravimetric analysis, electron paramagnetic resonance, nuclear magnetic spectra, infrared spectra, luminescence spectra, surface area and electron spectroscopy imaging of the materials are used to characterize the prepared materials. The catalytic activities of these metalloporphyrinosilica- template are compared.

  9. Hybrid Materials Prepared from Polymers and Self-assembled Systems by Physical Processes

    Institute of Scientific and Technical Information of China (English)

    Jean-Michel; Guenet

    2007-01-01

    1 Results A new type of hybrid materails prepared from ternary systems polymer/bicopper organic complex/solvent is presented.Each binary system displays differing types of behaviour: The polymer solutions produce thermoreversible gels while the bicopper organic complex (designated as CuS8) forms randomly-dispersed,self-assembling threads in organic solvents (See Fig.1(a),(b)).Fig.1 The CuS8 and ips thermoreversible gels Thermoreversible gels possess a fibrillar morphology with a typical mesh size ra...

  10. Bonelike/PLGA hybrid materials for bone regeneration : preparation route and physicochemical characterisation

    OpenAIRE

    Oliveira, Joaquim M.; Miyazaki, T; Lopes, M A; Ohtsuki, C.; Santos,J.D.

    2005-01-01

    Bonelike R /PLGA hybrid materials have been developed using γ -MPS as silane-coupling agent between the inorganic and organic phases for controlled drug delivery applications. Silanization showed to be more effective when cyclohexane was used as a non-polar solvent (nP method) due to a chemical interaction between Bonelike R and the silane film, while by using a 95/5 (V/V) methanol/water as a polar solvent (P method), a much thinner film was achieved. Functional groups of PL...

  11. Preparation and characterization of humic acid-carbon hybrid materials as adsorbents for organic micro-pollutants.

    Science.gov (United States)

    Radwan, Emad K; Abdel Ghafar, Hany H; Moursy, Ahmed S; Langford, Cooper H; Bedair, Ahmed H; Achari, Gopal

    2015-08-01

    The present work involves the preparation of novel adsorbent materials by the insolubilization and hybridization of humic acid (HA) with carbon. The prepared materials were characterized by N2 adsorption, elemental analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, solid-state (13)C cross polarization magic angle spinning nuclear magnetic resonance, and low-field nuclear magnetic resonance (NMR) relaxometry on wetted samples. The water solubility of these materials and the lack of effect of oxidants were also confirmed. With this background, the adsorption capacities toward phenol, 2,4,6-tricholrophenol, and atrazine were evaluated, using these as model compounds for organic micropollutants of concern in water. Experimental results show that the prepared materials are mesoporous and have a higher surface area than humic acid and even than the porous carbon in the case of carbon coating. They retain the basic features of the starting materials with lowered functional group content. Moreover, there are interesting new features. NMR relaxometry shows that equilibration of water uptake is very fast, making use in water simple. They have higher adsorption capacities than the pure materials, and they can be applied under a wide range of environmental conditions.

  12. Investigation of hybrid molecular material prepared by ionic liquid and polyoxometalate anion

    Indian Academy of Sciences (India)

    T Rajkumar; G Ranga Rao

    2008-11-01

    A solid hybrid molecular material containing 1-butyl 3-methyl imidazolium cations and Keggin anions of phosphotungstic acid has been synthesized. It is fully characterized by CHN analysis, FTIR, XRD, UV-Vis-NIR DRS, 31P MAS NMR, TGA and SEM. The FTIR spectrum of the compound shows the fingerprint vibrational bands of both Keggin molecular anions and imidazolium cations. The aromatic C-H stretch region (2700-3250 cm-1) of imidazolium cation is split due to the interaction between the ring C-H and bulky Keggin anion. The red-shift in the UV-Vis spectra and the downfield 31P MAS NMR chemical shift also confirm the electrostatic interaction between the ions in the compound. Near IR spectral region (1000-2500 nm) shows the elimination of water in the compound which is hydrophobic.

  13. Preparation and characterization of functional material based on hybrid polymer composites

    Science.gov (United States)

    Agusu, La; Amiruddin; Taswito, Chen Chen; Herdianto; Zamrun, Muh.

    2016-08-01

    The microstructures and properties of hybrid polymer composites based on polyaniline (PANi)/γ-Fe2O3 nanoparticles/TiO2/carbon have been investigated for multifunctional applications such as heavy metal removal and initial study for radar absorbing material application. γ-Fe2O3 nanoparticles with spherical shape were synthetized by a coprecipitation method from iron sand. By activating the polyethylene glycol (PEG-400) coated carbon of coconut shell, the homogenous shape and size of carbon was achieved. Then, γ- Fe2O3, TiO2, and carbon were mixed with PANi by an in situ polymerization method at low temperature 0-5 oC. Characterization process involved XRD, SEM, FTIR, VSM, and DC conductivity measurements. For radar absorber application, the functionalized polymer composites showed good electrical conductivity 0.45 S/cm to absorb the incoming electromagnetic energy. An efficient and effective reduction of Pb2+ ion from the water has been achieved by using this material.

  14. Preparation and property of a novel soluble electron transport POSS-based hybrid material

    Institute of Scientific and Technical Information of China (English)

    Xin Wang; Juan Shen; Jin Cui Wu; Min Fang; Hong Yao Xu

    2008-01-01

    A novel POSS-based organic/inorganic hybrid covalently attached at molecular level, 2-(4-(allyloxy)phenyl)-5-(4-(octyloxy)phenyl)-1,3,4-oxadiazole-POSS (6) (abbreviated as oxadiazole-POSS) was synthesized by Pt (dcp) catalyst. The hybrid was soluble in common organic solvents such as CHCl3, toluene, C2H4Cl2, and THF. Its structures and properties were characterized and evaluated with FTIR, 1H NMR, 13C NMR, 29Si NMR, EA, TGA, DSC, GPC, and CV, respectively. The results show that the novel hybrid possesses high thermal stability and good electron injection ability.

  15. Preparation of epoxy/zirconia hybrid materials via in situ polymerization using zirconium alkoxide coordinated with acid anhydride

    Energy Technology Data Exchange (ETDEWEB)

    Ochi, Mitsukazu, E-mail: mochi@ipcku.kansai-u.ac.jp [Faculty of Chemistry, Materials and Bioengineering, Kansai University, 3-3-35 Suita-shi, Osaka 564-8680 (Japan); Nii, Daisuke; Harada, Miyuki [Faculty of Chemistry, Materials and Bioengineering, Kansai University, 3-3-35 Suita-shi, Osaka 564-8680 (Japan)

    2011-09-15

    Highlights: {yields} Novel epoxy/zirconia hybrid materials were synthesized via in situ polymerization using zirconium alkoxide coordinated with acid anhydride. {yields} The half-ester compound of acid anhydride desorbed from zirconium played as curing agent of epoxy resin. {yields} The zirconia was uniformly dispersed in the epoxy matrix on the nanometer or sub-nanometer scale by synchronizing the epoxy curing and sol-gel reactions. {yields} The refractive indices of the hybrid materials significantly improved with an increase in the zirconia content. - Abstract: Novel epoxy/zirconia hybrid materials were synthesized using a bisphenol A epoxy resin (diglycidyl ether of bisphenol A; DGEBA), zirconium(IV)-n-propoxide (ZTNP), and hexahydrophthalic anhydride (HHPA) via in situ polymerization. HHPA played two roles in this system: it acted as a modifier to control the hydrolysis and condensation reactions of zirconium alkoxide and also as a curing agent - the half-ester compound of HHPA desorbed from zirconium reacted with the epoxy resin to form the epoxy network. As a result, both the sol-gel reaction and epoxy curing occurred simultaneously in a homogeneous solution, and organic-inorganic hybrid materials were readily obtained. Further, the zirconia produced by the in situ polymerization was uniformly dispersed in the epoxy matrix on the nanometer or sub-nanometer scale; thus, hybrid materials that exhibited excellent optical transparency were obtained. Furthermore, the heat resistance of the hybrid materials could be improved by hybridization with zirconia. And, the refractive indices of the hybrid materials significantly improved with an increase in the zirconia content.

  16. Preparation of Organic-Inorganic Hybrid Materials Based on MCM-41 and Its Applications

    Directory of Open Access Journals (Sweden)

    Sana M. Alahmadi

    2013-01-01

    Full Text Available This work reports the covalent attachment of three different calix[4]arenes (calix[4]arene (C4, p-sulfonatocalix[4]arene (C4S, and p-tert-butyl-calix[4]arene (PC4 to MCM-41, using a three-step modification process. 3-Chloropropyltrimethoxysilane (ClPTS was first attached to the mesoporous silica surface and subsequently converted to amides via the reaction with toluene diisocyanate (TDI. Finally, calix[4]arene derivatives attached to the isocyanate ending remained available on toluene di-iso-cyanate. Changes in the surface properties of the mesoporous silica caused by the chemical modification were monitored using the Fourier transform infrared spectroscopy (FTIR, thermal analysis (TGA, and elemental analysis. The FTIR spectra and TGA analysis verify that the calix[4]arene derivatives are covalently attached to the mesoporous silica. The preservation of the MCM-41 channel system was checked by the X-ray diffraction and nitrogen adsorption analysis. These materials were then used to evaluate the sorption properties of some organotins compounds (Tributyltin (TBT, Triphenyltin (TPT, and Dibutyltin (DBT.

  17. Porosity in hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, D.W.; Beaucage, G.; Loy, D. [Sandia National Labs., Albuquerque, NM (United States)

    1995-12-31

    Multicomponent, or hybrid composites are emerging as precursors to porous materials. Sacrifice of an ephemeral phase can be used to generate porosity, the nature of which depends on precursor structure. Retention of an organic constituent, on the other hand, can add desirable toughness to an otherwise brittle ceramic. We use small-angle x-ray and neutron scattering to examine porosity in both simple and hybrid materials. We find that microphase separation controls porosity in almost all systems studied. Pore distributions are controlled by the detailed bonding within and between phases as well as the flexibility of polymeric constituents. Thus hybridization opens new regions of pore distributions not available in simple systems. We look at several sacrificial concepts and show that it is possible to generate multimodal pore size distributions due to the complicated phase structure in the precursor.

  18. Photochromic organic-inorganic hybrid materials.

    Science.gov (United States)

    Pardo, Rosario; Zayat, Marcos; Levy, David

    2011-02-01

    Photochromic organic-inorganic hybrid materials have attracted considerable attention owing to their potential application in photoactive devices, such as optical memories, windows, photochromic decorations, optical switches, filters or non-linear optics materials. The growing interest in this field has largely expanded the use of photochromic materials for the purpose of improving existing materials and exploring new photochromic hybrid systems. This tutorial review summarizes the design and preparation of photochromic hybrid materials, and particularly those based on the incorporation of organic molecules in organic-inorganic matrices by the sol-gel method. This is the most commonly used method for the preparation of these materials as it allows vitreous hybrid materials to be obtained at low temperatures, and controls the interaction between the organic molecule and its embedding matrix, and hence allows tailoring of the performance of the resulting devices.

  19. Ring-Opening Polymerization of N-Carboxyanhydrides for Preparation of Polypeptides and Polypeptide-Based Hybrid Materials with Various Molecular Architectures

    KAUST Repository

    Pahovnik, David

    2015-09-01

    Different synthetic approaches utilizing ring-opening polymerization of N-carboxyanhydrides for preparation of polypeptide and polypeptide-based hybrid materials with various molecular architectures are described. An overview of polymerization mechanisms using conventional (various amines) as well as some recently developed initiators (hexamethyldisilazane, N-heterocyclic persistent carbenes, etc.) is presented, and their benefits and drawbacks for preparation of polypeptides with well-defined chain lengths and chain-end functionality are discussed. Recent examples from literature are used to illustrate different possibilities for synthesis of pure polypeptide materials with different molecular architectures bearing various functional groups, which are introduced either by modification of amino acids, before they are transformed into corresponding Ncarboxyanhydrides, or by post-polymerization modifications using protective groups and/or orthogonal functional groups. Different approaches for preparation of polypeptide-based hybrid materials are discussed as well using examples from recent literature. Syntheses of simple block copolymers or copolymers with more complex molecular architectures (graft and star copolymers) as well as modifications of nanoparticles and other surfaces with polypeptides are described.

  20. Preparation and characterization of hybrid materials from natural chrysotile; Preparacao e caracterizacao de materiais hibridos a partir da crisotila natural

    Energy Technology Data Exchange (ETDEWEB)

    Giraldelli, M.G.; Silva, M.L.C.P., E-mail: marciogiraldelli@hotmail.co [Universidade de Sao Paulo (EEL/USP), Lorena, SP (Brazil). Escola de Engenharia

    2010-07-01

    Special attention has been given to the development of new materials from natural chrysotile. This fiber has about 40% silicon oxide in its structure with an outer layer of brucite (MgOH{sub 2}). With the aim of obtaining a material with a more uniform structure, acid leaching was performed to remove the outer layer of brucite, resulting in a silicon oxide hydrate. This material was used as support for the deposition of Nb{sub 2}O{sub 5}.nH{sub 2}O. The Nb{sub 2}O{sub 5}.nH{sub 2}O was prepared by conventional precipitation using as starting material niobium metallic. In this study, we performed the synthesis and characterization of the material SiO{sub 2}.nH{sub 2}O / Nb{sub 2}O{sub 5}.nH{sub 2}O 1:1. Both chrysotile as niobium are widely available national resources, which confirms the economic viability of resource use. The materials studied were characterized by XRD, SEM and TG/DTG. (author)

  1. Polymer composites and porous materials prepared by thermally induced phase separation and polymer-metal hybrid methods

    Science.gov (United States)

    Yoon, Joonsung

    The primary objective of this research is to investigate the morphological and mechanical properties of composite materials and porous materials prepared by thermally induced phase separation. High melting crystallizable diluents were mixed with polymers so that the phase separation would be induced by the solidification of the diluents upon cooling. Theoretical phase diagrams were calculated using Flory-Huggins solution thermodynamics which show good agreement with the experimental results. Porous materials were prepared by the extraction of the crystallized diluents after cooling the mixtures (hexamethylbenzene/polyethylene and pyrene/polyethylene). Anisotropic structures show strong dependence on the identity of the diluents and the composition of the mixtures. Anisotropic crystal growth of the diluents was studied in terms of thermodynamics and kinetics using DSC, optical microscopy and SEM. Microstructures of the porous materials were explained in terms of supercooling and dendritic solidification. Dual functionality of the crystallizable diluents for composite materials was evaluated using isotactic polypropylene (iPP) and compatible diluents that crystallize upon cooling. The selected diluents form homogeneous mixtures with iPP at high temperature and lower the viscosity (improved processability), which undergo phase separation upon cooling to form solid particles that function as a toughening agent at room temperature. Tensile properties and morphology of the composites showed that organic crystalline particles have the similar effect as rigid particles to increase toughness; de-wetting between the particle and iPP matrix occurs at the early stage of deformation, followed by unhindered plastic flow that consumes significant amount of fracture energy. The effect of the diluents, however, strongly depends on the identity of the diluents that interact with the iPP during solidification step, which was demonstrated by comparing tetrabromobisphenol-A and

  2. Functional hybrid materials

    National Research Council Canada - National Science Library

    Fahmi, Amir; Pietsch, Torsten; Mendoza, Cesar; Cheval, Nicolas

    2009-01-01

    .... This paper describes our group's achievements towards the development of multifunctional nanostructures via self-assembly of hybrid systems based on the block copolymer PS-b-P4VP and inorganic nanoparticles (NPs...

  3. Preparation and Characterization of Organic/Inorganic Hybrid Nanofibers

    Institute of Scientific and Technical Information of China (English)

    WU Ning; WEI Qu-fu; LI Qi; XU Wen-zheng

    2006-01-01

    A new class of nanocomposites based on organic and inorganic species integrated at a nanoscale has obtained more attention these years. Organic-inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance. In this work, PVAc/TiO2 organicinorganic hybrid was prepared by sol-gel process. Electrospinning technique was used to fabricate PVAc/TiO2hybrid nanofibers. The structures and properties of the hybrid nanofibers were characterized by Scanning Electron Microscopy (SEM), Atomic Force Microscope (AFM),Differential Scanning Calorimeter (DSC) and Fouriertransform infrared (FTIR) spectra. SEM and AFM were employed to study the topography of the hybrid nanofibers.The chemical structure of the hybrid nanofibers were examined by FTIR. The DSC scansrevealed the second order transition temperature of the hybrid materials were higher than PVAc.

  4. Preparation of PAA/AM/MMT Hybrid by Intercalation Polymerization

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Over the last few years, Montmorillonite (MMT) was widely used as a special inorganic material for preparing Polymer/MMT nanocompsites. MMT is a clay imineral consisting of stacked silicate sheets whose thickness is about 10A. Through intercalation a large number of polymer-clay nanocomposites have been prepared such as Nylon-clay hybrid [1], PS-clay hybrid [2], Poly (methyl methacrylate) (PMMA)-clay hybrid [3], etc. In this article, the synthesis and properties of Poly (acrylic acid/acrylamide)/MMT hybrid (PAAAM/MMT) were studied. X-ray diffraction and Transmission electron microscopy were used to characterize the hybrid material. DSC has been used to study its property. Results showed that the intercalating reagents have entered the space of MMT's layers and enlarged them. At the same time, the MMT dispersed homogeneously in acrylic acid and acrylamide monomers that allow MMT to disperse in PAAAM matrix in the monolayer form.

  5. Hybrid and hierarchical composite materials

    CERN Document Server

    Kim, Chang-Soo; Sano, Tomoko

    2015-01-01

    This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous  and detailed examples and over 150 illustrations.   In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.

  6. Preparation and optical and electrical evaluation of bulk SiO{sub 2} sonogel hybrid composites and vacuum thermal evaporated thin films prepared from molecular materials derived from (Fe, Co) metallic phthalocyanines and 1,8 dihydroxiantraquinone compounds

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Vergara, Maria Elena [Coordinacion de Ingenieria Mecatronica, Facultad de Ingenieria, Universidad Anahuac Mexico Norte. Avenida Universidad Anahuac 46, Col. Lomas Anahuac, 52786 Huixquilucan, Estado de Mexico (Mexico); Morales-Saavedra, Omar G. [Universidad Nacional Autonoma de Mexico, Centro de Ciencias Aplicadas y Desarrollo Tecnologico, CCADET-UNAM, A.P. 70-186, Coyoacan, 04510 Mexico, D.F. (Mexico)], E-mail: omar.morales@ccadet.unam.mx; Ontiveros-Barrera, Fernando G.; Torres-Zuniga, Vicente; Ortega-Martinez, Roberto [Universidad Nacional Autonoma de Mexico, Centro de Ciencias Aplicadas y Desarrollo Tecnologico, CCADET-UNAM, A.P. 70-186, Coyoacan, 04510 Mexico, D.F. (Mexico); Ortiz Rebollo, Armando [Universidad Nacional Autonoma de Mexico, Instituto de Investigaciones en Materiales, IIM-UNAM, A.P. 70-360, Coyoacan, 04510 Mexico, D.F. (Mexico)

    2009-02-25

    Semiconducting molecular material of PcFe(CN)L1 and PcCo(CN)L1 (L1 = 1,8 dihydroxianthraquinone), PcFe(CN)L2 and PcCo(CN)L2 (L2 = double potassium salt of 1,8 dihydroxianthraquinone) have been successfully used to prepare thin film and bulk sol-gel hybrid optical materials. These samples were developed according to the vacuum thermal evaporation technique and the catalyst-free sonogel route, respectively. Thin films samples were deposited on Corning glass substrates and crystalline silicon wafers and were characterized by infrared (FTIR), Raman and ultraviolet-visible (UV-vis) spectroscopies. IR-spectroscopy and Raman studies unambiguously confirmed that the molecular material thin films exhibit the same intra-molecular bonds, which suggests that the thermal evaporation process does not alter these bonds significantly. These results show that it is possible to deposit molecular materials of PcFe(CN)L2 and PcCo(CN)L2 on Corning glass substrates and silicon wafers. From the UV-vis studies the optical band gap (E{sub g}) was evaluated. The effect of temperature on conductivity was also evaluated in these samples. Finally, the studied molecular systems dissolved at different concentrations in tetrahydrofuran (THF) were successfully embedded into a highly pure SiO{sub 2} sonogel network generated via sonochemical reactions to form several solid state, optically active sol-gel hybrid glasses. By this method, homogeneous and stable hybrid monoliths suitable for optical characterization can be produced. The linear optical properties of these amorphous bulk structures were determined by the Brewster angle method and by absorption-, Raman- and photoluminescent (PL)-spectroscopies, respectively.

  7. Novel hybrid polymeric materials for barrier coatings

    Science.gov (United States)

    Pavlacky, Erin Christine

    Polymer-clay nanocomposites, described as the inclusion of nanometer-sized layered silicates into polymeric materials, have been widely researched due to significant enhancements in material properties with the incorporation of small levels of filler (1--5 wt.%) compared to conventional micro- and macro-composites (20--30 wt.%). One of the most promising applications for polymer-clay nanocomposites is in the field of barrier coatings. The development of UV-curable polymer-clay nanocomposite barrier coatings was explored by employing a novel in situ preparation technique. Unsaturated polyesters were synthesized in the presence of organomodified clays by in situ intercalative polymerization to create highly dispersed clays in a precursor resin. The resulting clay-containing polyesters were crosslinked via UV-irradiation using donor-acceptor chemistry to create polymer-clay nanocomposites which exhibited significantly enhanced barrier properties compared to alternative clay dispersion techniques. The impact of the quaternary alkylammonium organic modifiers, used to increase compatibility between the inorganic clay and organic polymer, was studied to explore influence of the organic modifier structure on the nanocomposite material properties. By incorporating just the organic modifiers, no layered silicates, into the polyester resins, reductions in film mechanical and thermal properties were observed, a strong indicator of film plasticization. An alternative in situ preparation method was explored to further increase the dispersion of organomodified clay within the precursor polyester resins. In stark contrast to traditional in situ polymerization methods, a novel "reverse" in situ preparation method was developed, where unmodified montmorillonite clay was added during polyesterification to a reaction mixture containing the alkylammonium organic modifier. The resulting nanocomposite films exhibited reduced water vapor permeability and increased mechanical properties

  8. Synthesis and characterization of organic–inorganic hybrid materials prepared by sol–gel and containing Zn{sub x}Cd{sub 1−x}S nanoparticles prepared by a colloidal method

    Energy Technology Data Exchange (ETDEWEB)

    Gonçalves, Luis F.F.F., E-mail: luisf@quimica.uminho.pt [Centro de Química, Departamento de Química, Universidade do Minho, 4710-057 Braga (Portugal); Centro de Física, Departamento de Física, Universidade do Minho, 4710-057 Braga (Portugal); Silva, Carlos J.R. [Centro de Química, Departamento de Química, Universidade do Minho, 4710-057 Braga (Portugal); Kanodarwala, Fehmida K.; Stride, John A. [School of Chemistry, University of New South Wales, Sydney 2052 (Australia); Pereira, Mário R.; Gomes, Maria J.M. [Centro de Física, Departamento de Física, Universidade do Minho, 4710-057 Braga (Portugal)

    2013-12-15

    Nanocomposite materials based on a hybrid organic–inorganic ureasilicate matrix doped with Zn{sub x}Cd{sub 1−x}S nanoparticles were prepared. Zn{sub x}Cd{sub 1−x}S nanoparticles with different compositions (Zn/Cd mole ratio) were prepared through a colloidal method using reverse micelles. Previously to dispersion within the matrix precursors used to prepare the hybrid gel composite, the nanoparticles surface was modified in order to improve compatibility and stability with the matrix and to assure the preservation of the original optical properties of the nanoparticles. The matrix was obtained by the reaction between a silicon alkoxide modified by an isocyanate group and a di-amine functionalized oligopolyoxyethylene (Jeffamine ED-600), which by subsequent hydrolysis and condensation reactions formed a mechanically stable and highly transparent solid network containing the Zn{sub x}Cd{sub 1−x}S nanoparticles. The materials were characterized by absorption, steady-state and time-resolved photoluminescence spectroscopy and by HRTEM. The obtained nanocomposites show a high transparency in the visible range accounting for the good dispersion of the nanoparticles within the matrix. The results obtained confirmed the preservation of the original optical properties of the nanoparticles after their incorporation into the ureasilicate matrix, showing that the developed method is suitable for the production of materials with potential applications in which it is necessary to take advantage of the optical properties of the nanoparticles incorporated. The HRTEM analysis confirmed that the dispersed nanoparticles show a high level of crystallinization. -- Highlights: • Synthesis of a hybrid ureasilicate matrix doped with Zn{sub x}Cd{sub 1−x}S nanoparticles. • The influence of the composition of the nanoparticles plays an important role in the optical properties of the nanocomposites. • Preservation of the optical properties of the nanoparticles associated with

  9. High-quality reduced graphene oxide-nanocrystalline platinum hybrid materials prepared by simultaneous co-reduction of graphene oxide and chloroplatinic acid.

    Science.gov (United States)

    Wang, Yinjie; Liu, Jincheng; Liu, Lei; Sun, Darren Delai

    2011-03-21

    Reduced graphene oxide-nanocrystalline platinum (RGO-Pt) hybrid materials were synthesized by simultaneous co-reduction of graphene oxide (GO) and chloroplatinic acid with sodium citrate in water at 80°C, of pH 7 and 10. The resultant RGO-Pt hybrid materials were characterized using transmission electron microscopy (TEM), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy, and thermogravimetric analysis. Platinum (Pt) nanoparticles were anchored randomly onto the reduced GO (RGO) sheets with average mean diameters of 1.76 (pH 7) and 1.93 nm (pH 10). The significant Pt diffraction peaks and the decreased intensity of (002) peak in the XRD patterns of RGO-Pt hybrid materials confirmed that the Pt nanoparticles were anchored onto the RGO sheets and intercalated into the stacked RGO layers at these two pH values. The Pt loadings for the hybrid materials were determined as 36.83 (pH 7) and 49.18% (pH 10) by mass using XPS analysis. With the assistance of oleylamine, the resultant RGO-Pt hybrid materials were soluble in the nonpolar organic solvents, and the dispersion could remain stable for several months.

  10. High-quality reduced graphene oxide-nanocrystalline platinum hybrid materials prepared by simultaneous co-reduction of graphene oxide and chloroplatinic acid

    Directory of Open Access Journals (Sweden)

    Wang Yinjie

    2011-01-01

    Full Text Available Abstract Reduced graphene oxide-nanocrystalline platinum (RGO-Pt hybrid materials were synthesized by simultaneous co-reduction of graphene oxide (GO and chloroplatinic acid with sodium citrate in water at 80°C, of pH 7 and 10. The resultant RGO-Pt hybrid materials were characterized using transmission electron microscopy (TEM, powder X-ray diffraction (XRD, X-ray photoelectron spectroscopy (XPS, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. Platinum (Pt nanoparticles were anchored randomly onto the reduced GO (RGO sheets with average mean diameters of 1.76 (pH 7 and 1.93 nm (pH 10. The significant Pt diffraction peaks and the decreased intensity of (002 peak in the XRD patterns of RGO-Pt hybrid materials confirmed that the Pt nanoparticles were anchored onto the RGO sheets and intercalated into the stacked RGO layers at these two pH values. The Pt loadings for the hybrid materials were determined as 36.83 (pH 7 and 49.18% (pH 10 by mass using XPS analysis. With the assistance of oleylamine, the resultant RGO-Pt hybrid materials were soluble in the nonpolar organic solvents, and the dispersion could remain stable for several months.

  11. Preparation and Characterization of Oxidized Graphene/PMMA Hybrid Materials%氧化石墨烯/PMMA复合材料的制备与表征

    Institute of Scientific and Technical Information of China (English)

    吕新虎; 王利平; 李玉超; 邓爱霞; 孙发孟

    2012-01-01

    以石墨粉为原料,根据改进的Hummers氧化法制得氧化石墨烯,利用氧化石墨烯表面富集的羧基与乙二醇和酰氯化的4,4′-偶氮(4-氰基戊酸)的反应,进一步得到氧化石墨烯表面负载的4,4′-偶氮(4-氰基戊酸),以此为引发剂,通过自由基聚合制备了氧化石墨烯-聚甲基丙烯酸甲酯(oxidized graphene-g-PMMA)杂化材料.采用红外(FT-IR)、透射电镜(TEM)和原子力显微镜(AFM)对产物的结构和形貌进行了表征,并研究了频率依赖下的样品的电学性能.结果表明,PMMA已在氧化石墨烯表面接枝,石墨烯-聚甲基丙烯酸甲酯杂化材料的导电率及介电常数较氧化石墨烯分别降低了0.098S.cm-1和34 000.%Oxidized graphene was obtained via modified Hummers′s method with graphite as raw material.Then the carboxyl of oxidized graphene reacted with glycol and 4,4′-azobis(4-cyanopentanoic acid chloride) successively and resulted in oxidized graphene supported 4,4′-azobis(4-cyanopentanoic acid).The oxidized graphene-g-poly(methyl methacrylate)(oxidized graphene-g-PMMA) hybrid material was successfuly prepared using oxidized graphene supported 4,4′-azobis(4-cyanopentanoic acid) as initiator and methyl methacrylate as the monomer.The structure and the configuration of the samples were characterized by fourier transform infrared(FT-IR) spectroscopy,transmission electron microscopy(TEM) and atomic force microscopy(AFM) respectively.The electrical properties depended on frequency was also researched.The results show that the PMMA had grafted from the oxidized graphene surface,the electrical conductivity and the dielectric constant of oxidized graphene-g-PMMA hybrid material decreased 0.098 S·cm-1 and 34 000 respectively compared with oxidized graphene.

  12. Preparation and characterization of hybrid materials of epoxy resin type bisphenol a with silicon and titanium oxides by sol-gel process

    Energy Technology Data Exchange (ETDEWEB)

    Carrillo C, A.; Osuna A, J. G., E-mail: acc.carrillo@gmail.com [Universidad Autonoma de Coahuila, Facultad de Ciencias Quimicas, Blvd. Venustiano Carranza y Jose Cardenas Valdes, 25000 Saltillo, Coahuila (Mexico)

    2011-07-01

    Hybrid materials were synthesized from epoxy resins as a result bisphenol type A-silicon oxide and epoxy resin bisphenol type A-titanium oxide were obtained. The synthesis was done by sol-gel process using tetraethyl orthosilicate (Teos) and titanium isopropoxide (I Ti) as inorganic precursors. The molar ratio of bisphenol A to the inorganic precursors was the studied variable. The materials were characterized by thermal analysis, infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy. The hybrid nature of the materials was demonstrated through thermal analysis and infrared spectroscopy. In both systems, as the amount of alkoxide increased, the bands described above were more defined. This behavior indicates the interactions between the resin and the alkoxides. Hybrids with Teos showed a smoother and homogeneous surface in its entirety, without irregularities. Hybrids with titanium isopropoxide had low roughness. Both Teos and I Ti hybrids showed a decrease on the atomic weight percentage of carbon due to a slight reduction of the organic part on the surface. (Author)

  13. Fabrication of 2×2 Thermo-Optic Switches with Organic-Inorganic Hybrid Materials Prepared by Sol-Gel Technique

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    2×2 Mach-Zehnder interferometric thermo-optic switch was fabricated with organic/inorganic hybrid materials by sol-gel technique and direct UV patterning. The switching time of device was measured to be 4.2 ms and switching power 9.3 mW.

  14. Materials Preparation Center

    Data.gov (United States)

    Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

  15. Materials Preparation Center

    Data.gov (United States)

    Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

  16. A novel strategy to prepare Ge@C/rGO hybrids as high-rate anode materials for lithium ion batteries

    Science.gov (United States)

    Wang, Bangrun; Wen, Zhaoyin; Jin, Jun; Hong, Xiaoheng; Zhang, Sanpei; Rui, Kun

    2017-02-01

    Germanium is considered as a promising anode material for lithium ion batteries (LIBs) due to its high-capacity. However, owing to the huge volume variation during cycling, the batteries based on germanium anodes usually show poor cyclability and inferior rate capability. Herein, we demonstrated a novel strategy to uniformly anchor the core-shell structured germanium@carbon (Ge@C) on the reduced graphene oxide (rGO) nanosheets by the strong adhesion of dopamine. In the resulting Ge@C/rGO hybrid, the amorphous carbon layer and rGO nanosheets can effectively reduce the agglomeration of germanium and provide buffer matrix for the volume change in electrochemical lithium reactions. When used as anode materials for LIBs, Ge@C/rGO hybrids deliver a reversible capacity of 1074.4 mA h g-1 at 2C after 600 cycles (with capacity retention of 96.5%) and high rate capability of 436 mA h g-1 at 20C after 200 cycles. The encouraging electrochemical performance clearly demonstrates that Ge@C/rGO hybrids could be a potential anode material with high capacity, excellent rate capability, and good cycling stability for LIBs.

  17. Preparation of bio-deep eutectic solvent triggered cephalopod shaped silver chloride-DNA hybrid material having antibacterial and bactericidal activity.

    Science.gov (United States)

    Bhatt, Jitkumar; Mondal, Dibyendu; Bhojani, Gopal; Chatterjee, Shruti; Prasad, Kamalesh

    2015-11-01

    2.5% w/w DNA (Salmon testes) was solubilized in a bio-deep eutectic solvent [(bio-DES), obtained by the complexation of choline chloride and ethylene glycol at 1:2 molar ratio] containing 1% w/w of silver chloride (AgCl) to yield a AgCl decorated DNA based hybrid material. Concentration dependent formation of AgCl crystals in the DES was observed and upon interaction with DNA it gave formation of a cephalopod shaped hybrid material. DNA was found to maintain its chemical and structural stability in the material. Further, AgCl microstructures were found to have orderly self assembled on the DNA helices indicating the electrostatic interaction between Ag(+) and phosphate side chain of DNA as a driving force for the formation of the material with ordered microstructural distribution of AgCl. Furthermore, the functionalized material exhibited excellent antibacterial and bactericidal activity against both Gram negative and Gram positive pathogenic bacteria.

  18. Facile synthesis and application of poly(ionic liquid)-bonded silica hybrid materials.

    Science.gov (United States)

    Bi, Wentao; Tian, Minglei; Row, Kyung Ho

    2012-05-07

    Facile methods were developed to prepare hybrid poly(ionic liquid)-bonded silica for a wide range of applications, particularly in analytical chemistry. The hybrid material obtained was evaluated by comparing its adsorption capacity with other conventional separation materials. In addition, the hybrid material has the potential for industrial scale production.

  19. Carbon nanotubes/carbon fiber hybrid material: a super support material for sludge biofilms.

    Science.gov (United States)

    Liu, Qijie; Dai, Guangze; Bao, Yanling

    2017-07-16

    Carbon fiber (CF) is widely used as a sludge biofilm support material for wastewater treatment. Carbon nanotubes/carbon fiber (CNTs/CF) hybrid material was prepared by ultrasonically assisted electrophoretic deposition (EPD). CF supports (CF without handling, CF oxidized by nitric acid, CNTs/CF hybrid material) were evaluated by sludge immobilization tests, bacterial cell adsorption tests and Derjaguin -Landau -Verwey -Overbeek (DLVO) theory. We found that the CNTs/CF hybrid material has a high capacity for adsorbing activated sludge, nitrifying bacterial sludge and pure strains (Escherichia coli and Staphylococcus aureus). CNTs deposited on CF surface easily wound around the curved surface of bacterial cell which resulted in capturing more bacterial cells. DLVO theory indicated the lowest total interaction energy of CNTs/CF hybrid material, which resulted in the highest bacteria cell adsorption velocity. Experiments and DLVO theory results proved that CNTs/CF hybrid material is a super support material for sludge biofilms.

  20. DNA meets synthetic polymers—highly versatile hybrid materials

    NARCIS (Netherlands)

    Alemdaroglu, Fikri E.; Herrmann, Andreas

    2007-01-01

    The combination of synthetic polymers and DNA has provided biologists, chemists and materials scientists with a fascinating new hybrid material. The challenges in preparing these molecular chimeras were overcome by different synthetic strategies that rely on coupling the nucleic acid moiety and the

  1. Preparation of PAA/AM/MMT Hybrid by Intercalation Polymerization

    Institute of Scientific and Technical Information of China (English)

    WANG; YunPu

    2001-01-01

    Over the last few years, Montmorillonite (MMT) was widely used as a special inorganic material for preparing Polymer/MMT nanocompsites. MMT is a clay imineral consisting of stacked silicate sheets whose thickness is about 10A. Through intercalation a large number of polymer-clay nanocomposites have been prepared such as Nylon-clay hybrid [1], PS-clay hybrid [2], Poly (methyl methacrylate) (PMMA)-clay hybrid [3], etc.  In this article, the synthesis and properties of Poly (acrylic acid/acrylamide)/MMT hybrid (PAAAM/MMT) were studied. X-ray diffraction and Transmission electron microscopy were used to characterize the hybrid material. DSC has been used to study its property. Results showed that the intercalating reagents have entered the space of MMT's layers and enlarged them. At the same time, the MMT dispersed homogeneously in acrylic acid and acrylamide monomers that allow MMT to disperse in PAAAM matrix in the monolayer form.  ……

  2. Preparation and Property of the Water Absorbent Hybrid Resin

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Water absorption material has been attracted much more attention for its wide use in soil and water conservation, agriculture, etc. But this material will actually apply in agriculture, soil and water conservation only when it is cheap enough. Pulp fiber and starch to prepare high absorbing-water resin is a good method for decreasing the cost [1,2]. However, it still has a long way to turn it into reality. Now the montmorillonite is widely used in preparing nanocomposites [3]. But used it in preparing absorbing-water resin has little report. In this article the water absorption hybrid resin has been prepared by one step intercalation polymerization method. In the process of intercalation the partly neutralization acrylic acid and urea have been used as intercalating reagent. Beside that, the urea also has been used as cross-linking agent.

  3. Preparation and Property of the Water Absorbent Hybrid Resin

    Institute of Scientific and Technical Information of China (English)

    WANG; YunPu

    2001-01-01

    Water absorption material has been attracted much more attention for its wide use in soil and water conservation, agriculture, etc. But this material will actually apply in agriculture, soil and water conservation only when it is cheap enough. Pulp fiber and starch to prepare high absorbing-water resin is a good method for decreasing the cost [1,2]. However, it still has a long way to turn it into reality.  Now the montmorillonite is widely used in preparing nanocomposites [3]. But used it in preparing absorbing-water resin has little report. In this article the water absorption hybrid resin has been prepared by one step intercalation polymerization method. In the process of intercalation the partly neutralization acrylic acid and urea have been used as intercalating reagent. Beside that, the urea also has been used as cross-linking agent.   ……

  4. Analyte-triggered luminescence of Eu{sup 3+} ions encapsulated in Nafion membranes -preparation of hybrid materials from in membrane chemical reactions-

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Sánchez, Rocío, E-mail: raguilar@ifuap.buap.mx [Depto. Química Analítica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla 72570 (Mexico); Zelocualtecatl-Montiel, Iván [Depto. Química Analítica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla 72570 (Mexico); Gálvez-Vázquez, María de Jesús [Depto. Química Analítica, Facultad de Ciencias Químicas, Benemérita Universidad Autónoma de Puebla, Puebla 72570 (Mexico); Instituto de Física, Benemérita Universidad Autónoma de Puebla, Apartado postal J-48, Puebla 72570 (Mexico); Silva-González, Rutilo [Instituto de Física, Benemérita Universidad Autónoma de Puebla, Apartado postal J-48, Puebla 72570 (Mexico)

    2017-04-15

    The possibility to perform chemical reactions inside polymer materials opens a unique opportunity to control and prepare materials for diverse solid-state applications. Based on the affinity of Eu{sup 3+} ions for oxygen functionalities, in this work we report the luminescence enhancement of Eu{sup 3+} ions inserted in Nafion membranes (Naf/Eu{sup 3+}) by in-situ complexing to oxalate. The formation of a europium-oxalate type complex enhances Eu{sup 3+} luminescence emission, which could be exploited for the construction of devices for oxalate sensing and the fabrication of highly luminescent materials. Possible analytical applications of Naf/Eu{sup 3+} membranes were evaluated by fluorescence spectroscopy through the linear response with concentration. The complex formation was followed by infrared spectroscopy and SEM-EDS analysis. - Highlights: • Luminescence enhancement by complexation of Eu{sup 3+} ions to oxalate inside Nafion. • Performance of chemical reactions inside Nafion/polymer membranes. • An easy and novel method to prepare luminescent solid devices. • Possibility to develop luminescent sensors by analyte-triggered optical response.

  5. Graphene Hybrid Materials in Gas Sensing Applications

    Directory of Open Access Journals (Sweden)

    Usman Latif

    2015-12-01

    Full Text Available Graphene, a two dimensional structure of carbon atoms, has been widely used as a material for gas sensing applications because of its large surface area, excellent conductivity, and ease of functionalization. This article reviews the most recent advances in graphene hybrid materials developed for gas sensing applications. In this review, synthetic approaches to fabricate graphene sensors, the nano structures of hybrid materials, and their sensing mechanism are presented. Future perspectives of this rapidly growing field are also discussed.

  6. 木粉/TEOS杂化材料制备SiC木材陶瓷的研究%Study on Preparation of SiC Woodceramics from Wood/TEOS Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    张克宏

    2011-01-01

    Wood/TEOS hybrid material was prepared by sol-gel method using TEOS and china fir powder as raw materials. SiC woodceramics were prepared from hybrid material through sintering at lower temperature. Thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscope and scanning electron microscopy were employed to characterize the phase transformation and structural changes during the conversion of hybrid material into SiC woodceramics. Apparent porosity were measured by Archimend's law, and the tribology performance was investigated as function of sintering temperature and weight percent gain of hybrid material. The results show that the weight loss gain of wood/TEOS hybrid material is 20% at 800 ℃, so it is an ideal medium of SiC ceramics. The Si-O-C structure of hybrid material can changed into SiC in reaction sintering at 1000 ℃. The resulting SiC ceramics is composed of major crystal phaseβ-SiC and SiOn and has porous topology microstructure similar to wood. Apparent porosity is increased then reduced with the increase of sintering temperature and the decreasing in weight percent gain of hybrid material. The wearability of wood ceramics improved dramatically when weight percent gain and sintering temperature increased, especially for the sintering temperature between 1000 ℃ and 1200 ℃.%以木粉、正硅酸乙酯(TEOS)为原料,采用溶胶-凝胶方法将TEOS引入到木粉空隙中制备出木粉/TEOS杂化材料,在较低温度下烧结制得SiC木材陶瓷.采用热失重分析(TGA)、X射线衍射分析(XRD)、红外光谱(FT-IR)和扫描电镜(SEM)对其物相变化和显微结构进行了表征,用阿基米德法测定SiC木材陶瓷的显气孔率,研究了烧结温度和杂化材料增重率对SiC木材陶瓷摩擦性能的影响.研究结果表明,木粉/TEOS杂化材料在800 ℃时总的失重率仅为20%,是理想的SiC陶瓷前驱体;杂化材料中的Si-O-C结构可以在1000℃烧结成SiC;SiC木材陶

  7. Euro hybrid materials and structures. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Hausmann, Joachim M.; Siebert, Marc (eds.)

    2016-08-01

    In order to use the materials as best as possible, several different materials are usually mixed in one component, especially in the field of lightweight design. If these combinations of materials are joined inherently, they are called multi material design products or hybrid structures. These place special requirements on joining technology, design methods and manufacturing and are challenging in other aspects, too. The eight chapters with manuscripts of the presentations are: Chapter 1- Interface: What happens in the interface between the two materials? Chapter 2 - Corrosion and Residual Stresses: How about galvanic corrosion and thermal residual stresses in the contact zone of different materials? Chapter 3 - Characterization: How to characterize and test hybrid materials? Chapter 4 - Design: What is a suitable design and dimensioning method for hybrid structures? Chapter 5 - Machining and Processing: How to machine and process hybrid structures and materials? Chapter 6 - Component Manufacturing: What is a suitable manufacturing route for hybrid structures? Chapter 7 - Non-Destructive Testing and Quality Assurance: How to assure the quality of material and structures? Chapter 8 - Joining: How to join components of different materials?.

  8. Preparation of hybrid biomaterials for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Vilma Conceição Costa

    2007-03-01

    Full Text Available Tissue engineering has evolved from the use of biomaterials for bone substitution that fulfill the clinical demands of biocompatibility, biodegradability, non-immunogeneity, structural strength and porosity. Porous scaffolds have been developed in many forms and materials, but few reached the need of adequate physical, biological and mechanical properties. In the present paper we report the preparation of hybrid porous polyvinyl alcohol (PVA/bioactive glass through the sol-gel route, using partially and fully hydrolyzed polyvinyl alcohol, and perform structural characterization. Hybrids containing PVA and bioactive glass with composition 58SiO2-33CaO-9P2O5 were synthesized by foaming a mixture of polymer solution and bioactive glass sol-gel precursor solution. Sol-gel solution was prepared from mixing tetraethoxysilane (TEOS, triethylphosphate (TEP, and calcium chloride as chemical precursors. The hybrid composites obtained after aging and drying at low temperature were chemically and morphologically characterized through infrared spectroscopy and scanning electron microscopy. The degree of hydrolysis of PVA, concentration of PVA solution and different PVA-bioglass composition ratios affect the synthesis procedure. Synthesis parameters must be very well combined in order to allow foaming and gelation. The hybrid scaffolds obtained exhibited macroporous structure with pore size varying from 50 to 600 µm.

  9. Recent progress in hybrid materials science.

    Science.gov (United States)

    Sanchez, Clément; Shea, Kenneth J; Kitagawa, Susumu

    2011-02-01

    This themed issue of Chemical Society Reviews reviews recent progress made in hybrid materials science. Guest editors Clément Sanchez, Susumu Kitagawa and Ken Shea introduce the issue and the academic and industrial importance of the field.

  10. Novel hybrid materials based on the vanadium oxide nanobelts

    Science.gov (United States)

    Zabrodina, G. S.; Makarov, S. G.; Kremlev, K. V.; Yunin, P. A.; Gusev, S. A.; Kaverin, B. S.; Kaverina, L. B.; Ketkov, S. Yu.

    2016-04-01

    Novel hybrid materials based on zinc phthalocyanine and nanostructured vanadium oxides have attracted extensive attention for the development of academic research and innovative industrial applications such as flexible electronics, optical sensors and heterogeneous catalysts. Vanadium oxides nanobelts were synthesized via a hydrothermal treatment V2O5·nH2O gel with surfactants (TBAB, CTAB) used as structure-directing agents, where CTAB - cetyltrimethylammonium bromide, TBAB - tetrabutylammonium bromide. Hybrid materials were prepared decoration of (CTA)0.33V2O5 flexible nanobelts with cationic zinc phthalocyanine by the ion-exchange route. Investigations of the thermal stability, morphologies and structures of the (CTA)0.33V2O5, (TBA)0.16V2O5 nanobelts and zinc phthalocyanine exchange product were carried out. The hybrid materials based on the nanostructured vanadium oxide and zinc phthalocyanine were tested as photocatalysts for oxidation of citronellol and 2-mercaptoethanol by dioxygen.

  11. Facile Preparation of Optically Tailored Hybrid Nanocomposite

    Directory of Open Access Journals (Sweden)

    Susana Fernández de Ávila

    2014-01-01

    Full Text Available Lead sulfide nanoparticles (PbS NPs have been synthesized directly in poly[2-methoxy-5-(3′,7′-dimethyloctyloxy-1,4-phenylenevinylene] (MDMO-PPV semiconducting polymer by a simple low temperature method. Hybrid solutions with different concentrations of PbS with respect to the polymer have been prepared and characterized first in solution and then as thin film nanocomposites deposited on quartz substrates by spin coating. Quenching of photoluminescence emission is observed both in solutions and thin films when the ratio of PbS NPs increases with respect to the polymer, suggesting the occurrence of Dexter energy transfer from the polymer to the PbS NPs. Optical absorption is markedly increased for hybrid solutions compared to pure polymer. In thin nanocomposite films an enhancement of absorbance is observed with increasing PbS NPs concentration, which is more pronounced below 400 nm. The reported results could lead to the development of a method for tailoring the optical response of devices based on PbS NP-polymer nanocomposite by controlling the PbS NP concentration inside the polymer matrix.

  12. Preparation and Properties of Epoxy-based POSS/PAMAM Hybrid Materials%环氧基POSS/PAMAM杂合材料的制备及其性能

    Institute of Scientific and Technical Information of China (English)

    苏江勋; 刘欢; 郭莹; 蔡华轮; 许凯; 陈鸣才

    2011-01-01

    以3-缩水甘油基氧丙基三甲氧基硅烷(EPTMS)为原料,合成得到了八官能团缩水甘油醚-多面体低聚倍半硅氧烷(简称POSS-EP).采用4代树型端氨基聚酰胺-胺(PAMAM)作为POSS-EP和双酚A型环氧树脂(DGEBA)共混物的固化剂,制备了 5个环氧基POSS/PAMAM杂化材料.通过动态差示扫描量热仪(DSC),研究了环氧和PAMAM的固化反应动力学.通过DSC、热重分析(TGA)、拉力和冲击测试,对环氧基POSS/PAMAM杂化材料的热性能和力学性能进行了研究.结果表明,该环氧基POSS/PAMAM杂化材料具有优良的热性能和力学性能.%Glycidyl ether polyhedral oligomeric silsesquioxanes(POSS-EP) was prepared in high yield via hydrolysis and condensation of 3-glycidyloxypropyltrimethoxysilane ( EPTMS ). Through thermal copolymerization between G4 PAMAM dendrimers and blends of POSS-EP and bisphenol A epoxy resin (DGEBA), a series of epoxy-based POSS/PAMAM hybrid materials was obtained. The thermal copolymerization kinetics was investigated by means of dynamic differential scanning calorimetry ( DSC). Thermal and mechanical properties of the hybrid materials were studied by means of DSC, thermogravimetric analysis(TGA),tensile test and impact test. The results reveal that these epoxy-based POSS/PAMAM hybrid materials exhibited excellent thermal properties and mechanical properties.

  13. 肝素杂化材料的制备及抗凝血性质的初步研究%Preparation and Preliminary Study of Anticoagulant Properties of Heparin Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    宋玉民; 缐萍; 李清萍; 张玉梅; 马新贤; 张强; 王怡云

    2011-01-01

    以甲苯二异氰酸酯(TDI)中的-NCO基与纳米金属氧化物表面的羟基发生反应,得到改性纳米金属氧化物,并使其与肝素钠(Heparin)进行接枝反应生成肝素杂化材料,结合红外、热重、扫描电镜(SEM)等表征方法,确定纳米金属氧化物确实接枝到了肝素钠的表面.通过对体外凝血时间和复钙时间的测定,来初步研究肝素杂化材料的抗凝血性质.结果表明:肝素杂化材料的抗凝血时间和复钙时间均比肝素钠的要短,表明它的抗凝血性比肝素钠的抗凝血性要弱一些;但比纳米金属氧化物和空白组的抗凝血时间和复钙时间要长,说明肝素杂化材料的抗凝血性与其相比则有明显的提高.%Heparin hybrid materials were obtained by the grafting reaction of heparin and modified metal oxide nanoparticles, which were synthsized by the reaction between the TDIs NCO group and the hydroxyl group on the surface of nano metal oxides, and characterized by infrared spectra, thermogravimetry, scanning electron microscopy (SEM). The anticoagulant effect of hybrid materials were studied by the measurements of coagulation time (CT) and recalcification time (RT). The results showed that nano metal oxides were indeed grafted on the heparin. Compared to heparin, the coagulation time and recalcification time of heparin hybrid materials is shorter, but longer than the corresponding nano metal oxides and control group. In conclusion, the heparin hybrid materials were successfully prepared, and can shorten anti-coagulation time of heparin, prolong anti-coagulation time of nano metal oxides.

  14. Novel hybrid materials based on the vanadium oxide nanobelts

    Energy Technology Data Exchange (ETDEWEB)

    Zabrodina, G.S., E-mail: kudgs@mail.ru [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Lobachevsky State University, Nizhny Novgorod 603950 (Russian Federation); Makarov, S.G.; Kremlev, K.V. [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Lobachevsky State University, Nizhny Novgorod 603950 (Russian Federation); Yunin, P.A.; Gusev, S.A. [Institute for Physics of Microstructures Russian Academy of Sciences, Nizhny Novgorod 603087 (Russian Federation); Kaverin, B.S.; Kaverina, L.B. [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Ketkov, S.Yu. [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Lobachevsky State University, Nizhny Novgorod 603950 (Russian Federation)

    2016-04-15

    Graphical abstract: - Highlights: • Flat and curved vanadium oxide nanobelts have been synthesized. • Hybrid material was prepared via decoration of flexible nanobelts with zinc phthalocyanine. • Investigations of the thermal stability, morphologies and structures were carried out. - Abstract: Novel hybrid materials based on zinc phthalocyanine and nanostructured vanadium oxides have attracted extensive attention for the development of academic research and innovative industrial applications such as flexible electronics, optical sensors and heterogeneous catalysts. Vanadium oxides nanobelts were synthesized via a hydrothermal treatment V{sub 2}O{sub 5}·nH{sub 2}O gel with surfactants (TBAB, CTAB) used as structure-directing agents, where CTAB – cetyltrimethylammonium bromide, TBAB – tetrabutylammonium bromide. Hybrid materials were prepared decoration of (CTA){sub 0.33}V{sub 2}O{sub 5} flexible nanobelts with cationic zinc phthalocyanine by the ion-exchange route. Investigations of the thermal stability, morphologies and structures of the (CTA){sub 0.33}V{sub 2}O{sub 5}, (TBA){sub 0.16}V{sub 2}O{sub 5} nanobelts and zinc phthalocyanine exchange product were carried out. The hybrid materials based on the nanostructured vanadium oxide and zinc phthalocyanine were tested as photocatalysts for oxidation of citronellol and 2-mercaptoethanol by dioxygen.

  15. Preparation of graphene/silver hybrid materials and research of Raman enhanced performance%石墨烯携载无机纳米粒子的制备及拉曼性能研究

    Institute of Scientific and Technical Information of China (English)

    侯永超; 黄林军; 王彦欣; 唐建国; 刘继宪; 王瑶; 焦吉庆; 王薇; 赵运超

    2016-01-01

    Through in-situ composite preparation method,silver nanoparticles were doped in the graphene layers to prepared graphene/silver nano hybrid material.The graphene oxide,reduction of oxide graphene and graphene/silver nano hybrid material were characterized by UV-Vis,FTIR,XRD,TEM and Raman spectrum.The results show that Ag can enhanced the Raman signal of reduced graphene oxide/silver nanocomposites.Then,illustrate this problem combined with TEM.Found the reunite of Ag particle can ease the enhancement effect.%通过原位复合的方法,在石墨烯片层间掺杂纳米银颗粒,制备出石墨烯/银纳米杂化材料(RGO/Ag)。利用紫外吸收光谱、傅里叶红外光谱、透射电子显微镜(TEM)、XRD、拉曼光谱等对氧化石墨烯(GO)、还原氧化石墨烯(RGO)和石墨烯/银纳米杂化材料(RGO/Ag)进行表征。发现复合材料中的银对石墨烯/银材料有拉曼增强作用,结合TEM对这种增强作用进行研究,发现银颗粒的团聚对这种增强作用有减弱作用。

  16. Luminescent hybrid materials based on laponite clay.

    Science.gov (United States)

    Li, Huanrong; Li, Man; Wang, Yu; Zhang, Wenjun

    2014-08-11

    The spectroscopic behavior of ionic Eu(3+) or Tb(3+) complexes of an aromatic carboxyl-functionalized organic salt as well as those of the hybrid materials derived from adsorption of the ionic complexes on Laponite clay are reported. X-ray diffraction (XRD) patterns suggest that the complexes are mainly adsorbed on the outer surfaces of the Laponite disks rather than intercalated within the interlayer spaces. Photophysical data showed that the energy-transfer efficiency from the ligand to Eu(3+) ions in the hybrid material is increased remarkably with respect to the corresponding ionic complex. The hybrid material containing the Eu(3+) complex shows bright red emission from the prominent (5) D0 →(7) F2 transition of Eu(3+) ions, and that containing the Tb(3+) complex exhibits bright green emission due to the dominant (5) D4 →(7) F5 transition of Tb(3+) ions.

  17. Hybrid materials for optics and photonics.

    Science.gov (United States)

    Lebeau, Benedicte; Innocenzi, Plinio

    2011-02-01

    The interest in organic-inorganic hybrids as materials for optics and photonics started more than 25 years ago and since then has known a continuous and strong growth. The high versatility of sol-gel processing offers a wide range of possibilities to design tailor-made materials in terms of structure, texture, functionality, properties and shape modelling. From the first hybrid material with optical functional properties that has been obtained by incorporation of an organic dye in a silica matrix, the research in the field has quickly evolved towards more sophisticated systems, such as multifunctional and/or multicomponent materials, nanoscale and self-assembled hybrids and devices for integrated optics. In the present critical review, we have focused our attention on three main research areas: passive and active optical hybrid sol-gel materials, and integrated optics. This is far from exhaustive but enough to give an overview of the huge potential of these materials in photonics and optics (254 references).

  18. Calcium phosphate polymer hybrid materials

    OpenAIRE

    2011-01-01

    Calcium phosphate (CaP) is of strong interest to the medical field because of its potential for bone repair, gene transfection, etc.1-3 Nowadays, the majority of the commercially available materials are fabricated via “classical” materials science approaches, i.e. via high temperature or high pressure approaches, from rather poorly defined slurries, or from organic solvents.3,4 Precipitation of inorganics with (polymeric) additives from aqueous solution on the other hand enables the synthesis...

  19. Facile synthesis of MOF-5 confined in SBA-15 hybrid material with enhanced hydrostability.

    Science.gov (United States)

    Wu, Chia-Ming; Rathi, Monika; Ahrenkiel, S Phil; Koodali, Ranjit T; Wang, Zhenqiang

    2013-02-11

    A MOF-5 [Zn(4)O(BDC)(3); BDC = 1,4-benzenedicarboxylate]@SBA-15 hybrid material has been prepared by using SBA-15 as a matrix. This hybrid material exhibits improved hydrostability under ambient conditions and unique gas adsorption behavior compared with pristine MOF-5.

  20. Hybrid materials offer new perspectives.

    Science.gov (United States)

    Arnetzl, G; Arnetzl, G V

    2015-01-01

    Dental materials, especially in restorative dentistry, must not only be cost-effective, they must also meet many other requirements: biocompatibility, durability, excellent shade and light effects, abrasion resistance, hardness, mechanical strength under pressure, chemical resistance, surface density, ease of manufacture, and easy intraoral maintenance.

  1. High abrasion resistance coating materials from organic/inorganic hybrid materials produced by the sol-gel method

    OpenAIRE

    1990-01-01

    A series of new high abrasion resistance coating materials have been prepared utilizing organic/inorganic hybrid materials formed by cohydrolyzing a metal alkoxide sol (e.g. silicon, aluminum, titanium, or zirconium metal alkoxide sol) with one or more bis(trialkoxysilane-containing) organic components or related functionalized species. These hybrid materials show optical clarity and improve the abrasion resistance of polymer substrates when applied as coatings and cured on such substrates.

  2. Preparation of Ionic Silsesquioxanes with Regular Structures and Their Hybridization

    Directory of Open Access Journals (Sweden)

    Yoshiro Kaneko

    2012-01-01

    Full Text Available This paper deals with our recent studies on the preparation of ionic silsesquioxanes (SQs with regular structures. Cationic ladder-like polySQs (PSQs with hexagonally stacked structures were successfully prepared by the sol-gel reactions of amino group-containing organotrialkoxysilanes in strong acid aqueous solutions. Self-organization of an ion pair (a salt prepared from the amino group in the organotrialkoxysilane and an acid is the key factor for the formation of such regular structures of the PSQs. It is also reported that the control of the conformational structure of the PSQs was performed by the introduction of the chiral moieties. In addition, we investigated the correlation between the of acid-catalysts and the structures of SQs prepared by the hydrolytic condensation of amino group-containing organotrialkoxysilane, that is, the use of the superacid aqueous solution resulted in the formation of cage-like octaSQ, while the ladder-like PSQs with hexagonally stacked structures were formed from the strong acid aqueous solutions under the same reaction conditions. Furthermore, anion-exchange behaviors of the cationic ladder-like PSQ were investigated with various organic and inorganic compounds, such as anionic surfactants, a polymer, and layered clay minerals, to obtain the functional hybrid materials.

  3. Hybrid sol-gel optical materials

    Science.gov (United States)

    Zeigler, John M.

    1992-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  4. Facile preparation of agarose-chitosan hybrid materials and nanocomposite ionogels using an ionic liquid via dissolution, regeneration and sol-gel transition

    CERN Document Server

    Trivedi, Tushar J; Kumar, Arvind

    2014-01-01

    We report simultaneous dissolution of agarose (AG) and chitosan (CH) in varying proportions in an ionic liquid (IL), 1-butyl-3-methylimidazolium chloride [C4mim][Cl]. Composite materials were constructed from AG-CH-IL solutions using the antisolvent methanol, and IL was recovered from the solutions. Composite materials could be uniformly decorated with silver oxide (Ag2O) nanoparticles (Ag NPs) to form nanocomposites in a single step by in situ synthesis of Ag NPs in AG-CH-IL sols, wherein the biopolymer moiety acted as both reducing and stabilizing agent. Cooling of Ag NPs-AG-CH-IL sols to room temperature resulted in high conductivity and high mechanical strength nanocomposite ionogels. The structure, stability and physiochemical properties of composite materials and nanocomposites were characterized by several analytical techniques, such as Fourier transform infrared (FTIR), CD spectroscopy, differential scanning colorimetric (DSC), thermogravimetric analysis (TGA), gel permeation chromatography (GPC), and...

  5. Facile approach to prepare Pt decorated SWNT/graphene hybrid catalytic ink

    Energy Technology Data Exchange (ETDEWEB)

    Mayavan, Sundar, E-mail: sundarmayavan@cecri.res.in [Centre for Innovation in Energy Research, CSIR–Central Electrochemical Research Institute, Karaikudi 630006, Tamil Nadu (India); Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon, 305-701 (Korea, Republic of); Mandalam, Aditya; Balasubramanian, M. [Centre for Innovation in Energy Research, CSIR–Central Electrochemical Research Institute, Karaikudi 630006, Tamil Nadu (India); Sim, Jun-Bo [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon, 305-701 (Korea, Republic of); Choi, Sung-Min, E-mail: sungmin@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon, 305-701 (Korea, Republic of)

    2015-07-15

    Highlights: • Pt NPs were in situ synthesized onto CNT–graphene support in aqueous solution. • The as-prepared material was used directly as a catalyst ink without further treatment. • Catalyst ink is active toward methanol oxidation. • This approach realizes both scalable and greener production of hybrid catalysts. - Abstract: Platinum nanoparticles were in situ synthesized onto hybrid support involving graphene and single walled carbon nanotube in aqueous solution. We investigate the reduction of graphene oxide, and platinum nanoparticle functionalization on hybrid support by X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The as-prepared platinum on hybrid support was used directly as a catalyst ink without further treatment and is active toward methanol oxidation. This work realizes both scalable and greener production of highly efficient hybrid catalysts, and would be valuable for practical applications of graphene based fuel cell catalysts.

  6. Preparation and applications of hybrid organic-inorganic monoliths: a review.

    Science.gov (United States)

    Zhu, Tao; Row, Kyung Ho

    2012-06-01

    This review presents an overview of the properties of hybrid organic-inorganic monolithic materials and summarizes the recent developments in the preparation and applications of these hybrid monolithic materials. Hybrid monolithic materials with porosities, surface functionalities, and fast dynamic transport have developed rapidly, and have been used in a wide range of applications owing to the low cost, good stability, and excellent performance. Basically, these materials can be divided into two major types according to the chemical composition: hybrid silica-based monolith (HSM) and hybrid polymer-based monolith (HPM). Compared to the HPM, HSM monolith has been attracting most wide attentions, and it is commonly synthesized by the sol-gel process. The conventional preparation procedures of two type's hybrid organic-inorganic monoliths are addressed. Applications of hybrid organic-inorganic monoliths in optical devices, capillary microextraction (CME), capillary electrochromatography (CEC), high performance liquid chromatography (HPLC), and chiral separation are also reviewed. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Hybrid organic-inorganic materials: from self-organization to nanocrystals

    OpenAIRE

    Figus, Cristina

    2010-01-01

    The advantage of inorganic–organic hybrids is that they can combine the properties of organic and inorganic components in one material; this provides the opportunity to invent new materials with a large spectrum properties. The synthesis of hybrid materials through the precise structure control from the molecular to the macroscopic level is a key point for a variety of applications. 3-Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most common precursors for the prepar...

  8. A Paradigm for EST Materials Preparation.

    Science.gov (United States)

    Carreon, Edwina S.; Balarbar, Corazon V.

    In many countries, suitable English for special purposes (ESP) textbooks and materials are difficult to find. ESP teachers and program coordinators often must develop their own materials, but preparing such materials requires training. One model that has served as a guide to numerous ESP materials projects is the Hutchinson and Waters' model. This…

  9. Temperature dependent NIR emitting lanthanide-PMO/silica hybrid materials.

    Science.gov (United States)

    Kaczmarek, Anna M; Esquivel, Dolores; Ouwehand, Judith; Van Der Voort, Pascal; Romero-Salguero, Francisco J; Van Deun, Rik

    2017-06-28

    Two materials - a mesoporous silica (MS) and a periodic mesoporous organosilica (PMO) functionalized with dipyridyl-pyridazine (dppz) units were grafted with near-infrared (NIR) emitting lanthanide (Nd(3+), Er(3+), Yb(3+)) complexes in an attempt to obtain hybrid NIR emitting materials. The parent materials: dppz-vSilica and dppz-ePMO were prepared by a hetero Diels-Alder reaction between 3,6-di(2-pyridyl)-1,2,4,5-tetrazine (dptz) and the double bonds of either ethenylene-bridged PMO (ePMO) or vinyl-silica (vSilica) and subsequent oxidation. The dppz-vSilica is reported here for the first time. The prepared lanthanide-PMO/silica hybrid materials were studied in depth for their luminescence properties at room temperature and chosen Nd(3+) and Yb(3+) samples also at low temperature (as low as 10 K). We show that both the dppz-vSilica and dppz-ePMO materials can be used as "platforms" for obtaining porous materials showing NIR luminescence. To obtain NIR emission these materials can be excited either in the UV or Vis region (into the π→π* transitions of the ligands or directly into the f-f transitions of the Ln(3+) ions). More interestingly, when functionalized with Nd(3+) or Yb(3+)β-diketonate complexes these materials showed interesting luminescence properties over a wide temperature range (10-360 K). The Yb(3+) materials were investigated for their potential use as ratiometric temperature sensors.

  10. 溶胶-凝胶法制备有机硅/SiO2杂化材料的研究进展%Research on Organic Silicone/SiO2 Hybrid Materials Prepared by the Method of Sol-gel

    Institute of Scientific and Technical Information of China (English)

    杨晓东; 刘光明

    2012-01-01

    介绍了溶胶-凝胶法制备有机硅/SiO2杂化材料的原理与工艺,综述了有机硅/SiO2杂化材料在耐热材料、腐蚀防护材料、光学材料领域的应用研究情况.使用溶胶-凝胶法制备的有机硅/SiO2杂化材料作为一种全硅体系,很好地结合了有机硅和纳米SiO2的优势,具有很好的发展前景.%The principle and preparation process of organic silicone/SiO2 hybrid materials prepared by the method of sol-gel were described. The applied research of organic silicone/SiO2 hybrid materials in the field of heat-resistant materials, corrosion protection and optical materials were summarized. The organic silicone/SiO2 hybrid materials prepared by the sol-gel as an all-silicon system combined the advantage of the organic silicone and nano-SiO2, which render it a promising material.

  11. Synthesis and stabilization of oxide-based colloidal suspensions in organic media: application in the preparation of hybrids organic-inorganic materials for very high laser damage threshold coatings; Synthese et stabilisation de suspensions colloidales d'oxydes en milieu organique: application a la preparation de materiaux hybrides organiques-inorganiques pour des revetements a tres haute tenue au flux laser

    Energy Technology Data Exchange (ETDEWEB)

    Marchet, N.

    2008-02-15

    Multilayer coatings are widely used in optic and particular in the field of high power laser on the components of laser chains. The development of a highly reflective coating with a laser damage resistance requires the fine-tuning of a multilayer stack constituted by a succession alternated by materials with low and high refractive index. In order to limit the number of layers in the stack, refractive indexes must be optimized. To do it, an original approach consists in synthesizing new organic-inorganic hybrid materials satisfying the criteria of laser damage resistance and optimized refractive index. These hybrid materials are constituted by nano-particles of metal oxides synthesized by sol-gel process and dispersed in an organic polymer with high laser damage threshold. Nevertheless, this composite system requires returning both compatible phases between them by chemical grafting of alc-oxy-silanes or carboxylic acids. We showed that it was so possible to disperse in a homogeneous way these functionalized nano-particles in non-polar, aprotic solvent containing solubilized organic polymers, to obtain time-stable nano-composite solutions. From these organic-inorganic hybrid solutions, thin films with optical quality and high laser damage threshold were obtained. These promising results have permitted to realize highly reflective stacks, constituted by 7 pairs with optical properties in agreement with the theoretical models and high laser damage threshold. (author)

  12. Preparation of PBMA/AA-SiO2 nano hybrid material using RAFT polymerization%RAFT 聚合制备 PBMA/AA-SiO2杂化纳米材料

    Institute of Scientific and Technical Information of China (English)

    王芳平; 张珺瑛; 李晚霞; 袁婷; 王其召; 俞洁; 杜新贞

    2013-01-01

    With bis[4-(methoxycarbonyl)benzyl]trithiocarbonate(CTA)as a chain transfer agent,butyl methacrylate(BMA)as monomer ,and functionalized silica modified by attaching AA group to the surface , PBMA/AA-SiO2 nano composite material was prepared using reversible addition-fragmentation chain transfer ( RAFT) polymerization.The structures and properties of PBMA/AA-SiO2 were characterized by FT-IR,TGA,GPC and TEM.These results showed that PBMA/AA-SiO2 hybrid microspheres of 22 nm in average diameters were obtained.TGA results revealed that the thermal stability of the hybrid material was very well ,and the graft-ing yield of PBMA on the SiO 2 was 19%.%以三硫代二[4-(甲氧羰基)苄基]碳酸酯为链转移剂( CTA),甲基丙烯酸丁酯( BMA)为单体,通过可逆加成-断裂链转移自由基聚合( RAFT)法修饰丙烯酸( AA)功能化的纳米二氧化硅( SiO2),制备了PBMA/AA-SiO2有机/无机杂化纳米材料。并通过FT-IR、GPC、TGA、TEM表征和分析了杂化材料的结构、分子量、SiO2纳米粒子在基体中的分散性以及杂化材料的热稳定性。结果表明,PBMA/AA-SiO2杂化微球粒径约为22 nm,分布均匀;TGA分析表明此杂化材料的热稳定性良好,PBMA接枝率为19%。

  13. 介孔分子筛/线性酚醛树脂杂化材料的制备及表征%Preparation and Characterization of Mesoporous Silica/ Novolac Type Phenol-Formaldehyde Resin Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    余传柏; 韦春; 刘红霞; 蒙礼统

    2012-01-01

    Mesoporous silica/novolac type phenol-formaldehyde resin hybrid materials were prepared via in situ polymerization at the silica SBA-15,which was treated with γ-glycidyl oxypropyl trimethoxysilane(KH560) as coupling agent.SBA-15,SBA-15-KH560 and E-SBA-15/PF were characterized and analyzed with X-ray diffraction(XRD),N2 adsorption isotherm,Fourier transform infrared spectroscopic(FT-IR) and thermogravimetric analysis(TGA) respectively.The results indicate that KH560 was chemically grafted onto SBA-15,and PF distributed into the inner and outer path of the SBA-15.An interpenetrating network of organic-inorganic was formed in this hybrid materials.The regular structure of SBA-15 was little influenced with KH560,but it was greatly modified viain situ polymertization.%利用水热法合成介孔分子筛(SBA-15),选择KH560对其表面进行修饰后采用原位聚合的方法制备了介孔分子筛/线性酚醛树脂(SBA-15/PF)有机无机杂化材料。通过傅立叶红外光谱(FT-IR)、X射线衍射(XRD)、N2吸附和热失重分析(TGA)等表征手段对杂化材料的制备过程进行跟踪研究。结果表明,KH-560已嫁接到SBA-15的内外表面,线性酚醛树脂分布于介孔分子筛孔道内外,并与SBA-15存在键接作用,形成有机无机互穿网络结构;表面修饰过程对SBA-15有序结构影响较小,而原位聚合会破坏介孔分子筛部分有序结构。

  14. One-step preparation of organometal/Fe{sub 3}O{sub 4} hybrid microspheres and their electromagnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Wei Junji; Zhan Yingqing; Yang Xulin; Meng Fanbin; Ma Zhen; Zhao Rui; Zhong Jiachun; Zhang Jiandong [Research Branch of Functional Materials, Institute of Microelectronic and Solid State Electronic, University of Electronic Science and Technology of China, Chengdu 610054 (China); Liu Xiaobo, E-mail: liuxb@uestc.edu.cn [Research Branch of Functional Materials, Institute of Microelectronic and Solid State Electronic, University of Electronic Science and Technology of China, Chengdu 610054 (China)

    2011-12-15

    Novel organometal/Fe{sub 3}O{sub 4} hybrid microspheres were prepared from bisphthalonitrile-benzoxine resin containing ferrocene (FPNBZ) and FeCl{sub 3}.6H{sub 2}O via a one-step solvent-thermal method. The phase structure, composition and morphology of as-prepared hybrid microspheres were characterized by X-ray powder diffraction, Fourier transform infrared spectrophotometer and scanning electron microscopy. The results revealed that crystallinity, dispersity and size of hybrid microspheres can be controlled by altering the reaction parameters. Density measurement showed that the density is decreased with increasing FPNBZ concentration in the hybrid materials. Electromagnetic properties of the FPNBZ/Fe{sub 3}O{sub 4} hybrid microspheres were measured at 2-18 GHz. The electromagnetic measurement indicated that the resonance peaks of complex permittivity, complex permeability, dielectric loss and magnetic loss were shifted to the high frequencies, with the increasing amount of FPNBZ. The as-prepared hybrid materials are believed to have broad applications both in microwave absorption materials in a wide frequency range and in biomedical fields. - Highlights: > The as-prepared hybrid microspheres showed high resistivity, good thermal stability and low density. > Morphology, size, magnetism and electromagnetic properties of hybrid microspheres can illicit by altering the reaction parameters. > Hybrids is alleged to have wide applications both in microwave absorption materials in a wide frequency range and in biomedical fields.

  15. Tough, bio-inspired hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Munch, Etienne; Launey, Maximimilan E.; Alsem, Daan H.; Saiz, Eduardo; Tomsia, Antoni P.; Ritchie, Robert O.

    2008-10-06

    The notion of mimicking natural structures in the synthesis of new structural materials has generated enormous interest but has yielded few practical advances. Natural composites achieve strength and toughness through complex hierarchical designs extremely difficult to replicate synthetically. Here we emulate Nature's toughening mechanisms through the combination of two ordinary compounds, aluminum oxide and polymethylmethacrylate, into ice-templated structures whose toughness can be over 300 times (in energy terms) that of their constituents. The final product is a bulk hybrid ceramic material whose high yield strength and fracture toughness ({approx}200 MPa and {approx}30 MPa{radical}m) provide specific properties comparable to aluminum alloys. These model materials can be used to identify the key microstructural features that should guide the synthesis of bio-inspired ceramic-based composites with unique strength and toughness.

  16. Molecular Design of Low-Density Multifunctional Hybrid Materials

    Science.gov (United States)

    2016-01-01

    Structure -Property Relationships of Hybrid Mixed Oxide Organic - Inorganic Films for Multilayer Adhesive Bonding”, MRS 2012 Spring Meeting, San Francisco...AVAILABILITY STATEMENT No distribution limitation. 13. SUPPLEMENTARY NOTES 14. ABSTRACT Low-density hybrid materials, which contain organic and... hybrid materials, which contain organic and inorganic molecular components, can be engineered over a wide range of length scales to exhibit unique

  17. Structure of hybrid organic-inorganic sols for the preparation of hydrothermally stable membranes

    NARCIS (Netherlands)

    Castricum, H.L.; Sah, A.; Geenevasen, J.A.J.; Kreiter, R.; Blank, D.H.A.; Vente, J.F.; ten Elshof, J.E.

    2008-01-01

    A procedure for the preparation of hybrid sols for the synthesis of organic-inorganic microporous materials and thin film membranes is reported. We describe silane reactivity and sol structure for acid-catalysed colloidal sols from mixtures of either tetraethylorthosilicate (TEOS) and methyltriethox

  18. Preparation of Chitosan-SiO2 Hybrid Composite Material via Tetraethy Loxy Silane Sol-Gel Process%正硅酸乙酯溶胶-凝胶制备壳聚糖-SiO2杂化材料

    Institute of Scientific and Technical Information of China (English)

    崔少伟; 唐正华; 葛建芳

    2012-01-01

    用共混法和原位杂化法分别合成了壳聚糖-SiO2杂化材料,研究了投料比对壳聚糖-SiO2杂化材料的结构以及耐水性、力学性能、Cu2+吸附性的影响.结果表明:与纯壳聚糖相比,共混法和原位杂化法合成的杂化膜材料的吸水倍率最高时分别比纯壳聚糖提高了108.3%和11.1%;共混法合成的杂化膜材料拉伸断裂强度随,mTEOS/m壳聚糖的增加先增大后减小,而原位杂化法的则是随mTEOS/m壳聚糖的增加一直增大,分别比纯壳聚糖膜提高了 19.9%和20.3%同时,随着mTEOS/m壳聚糖的增大,两种方法制备的杂化材料的断裂伸长率均下降;而随着mTEOS/m壳聚糖值的增大,共混法合成的杂化膜对Cu2-的吸附能力则是先增强后逐渐降低,而原位杂化法的则一直降低.TGA分析表明:SiO2的引入并术改变壳聚糖的降解机理.SEM分析表明:复合材料是以纳米尺度的SiO2增强的杂化膜材料.%Chitosan-SiO, hybrid materials were prepared by the methods of blending and original hybrid respectively. The effects of the feed ratio of TEOS to chitosan on the structures and properties which included moisture resistance, mechanical, Gu2+ adsorption of the hybrid materials were studied. The results indicated that the materials' highest water adsorption rate prepared by blending and originally hybrid the increase 108. 3% and 11. \\% respectively compared to the pure chitosan film material. As regarding to the tensile strength, the material prepared by blending the highest increase rate was 19. 9% and originally hybrid's was 20. 3% compared to the pure chitosan film material; with the increasing of the value of mTEOS/mchitosan, the tensile strength value of the material prepared by blending increased firstly then decreased but the originally hybrid's increased directly. At the same time, with the increasing of the value of mTeOS/mchiitooan, the elongation value of the materials which were prepared by blending and

  19. Polymer hybrid materials for planar optronic systems

    Science.gov (United States)

    Körner, Martin; Prucker, Oswald; Rühe, Jürgen

    2015-09-01

    Planar optronic systems made entirely from polymeric functional materials on polymeric foils are interesting architectures for monitoring and sensing applications. Key components in this regard are polymer hybrid materials with adjustable optical properties. These materials can then be processed into optical components such as waveguides for example by using embossing techniques. However, the resulting microstructures have often low mechanical or thermal stability which quickly leads to a degradation of the microstructures accompanied often by a complete loss of function. A simple and versatile way to increase the thermal and mechanical stability of polymers is to connect the individual chains to a polymer network by using thermally or photochemically reactive groups. Upon excitation, these groups form reactive intermediates such as radicals or nitrenes which then crosslink with adjacent C-H-groups through a C,H insertion reaction (CHic = C,H insertion based crosslinking). To generate waveguide structures a PDMS stamp is filled with the waveguide core material e.g. poly(methylmethacrylate) (PMMA), which is modified with a few mol% of the thermal crosslinker and hot embossed onto a foil substrate e.g. PMMA. In this one-step hot embossing process polymer ridge waveguides are formed and simultaneously the polymer becomes crosslinked. Due to the reaction across the boundary between waveguide and substrate it is also possible to combine initially incompatible polymers for the waveguide and the substrate foil. The thermomechanical properties of the obtained materials are studied.

  20. Controlling the Morphology of Nano-Hybrid Materials

    Directory of Open Access Journals (Sweden)

    Abdullah I.A. Jaafari

    2010-01-01

    Full Text Available Problem statement: It is known that layer double hydroxide is one of the nano ordered layered compounds and possesses plate-like morphology if carefully crystallized. Approach: In this study, Co-Sn LDH consisting of divalent and tetravalent cations was prepared with new morphology. XRD patterns of the prepared Co-Sn LDH showed that the interlayer spacing of the LDH was 0.78 nm and SEM image showed nano-needles structure. Results: By intercalation reaction with monocarboxylic acids at room temperature, XRD patterns indicated that the interlayered spacing increased to 3-4.8 nm and formed organic-inorganic nano-hybrid materials. Also, SEM images showed that the nano-needles structure of Co-Sn LDH changes to plate like-structure. Conclusion: Thermal analyses (TG, DTG and DTA and Infrared spectrum confirmed the intercalation processes of n-capric acid and n-stearic acid inside Co-Sn LDH and the formation of nano-hybrid materials.

  1. The Preparation and Characterization of Materials.

    Science.gov (United States)

    Wold, Aaron

    1980-01-01

    Presents several examples illustrating different aspects of materials problems, including problems associated with solid-solid reactions, sintering and crystal growth, characterization of materials, preparation and characterization of stoichiometric ferrites and chromites, copper-sulfur systems, growth of single crystals by chemical vapor…

  2. Fluorescence In Situ Hybridization Probe Preparation.

    Science.gov (United States)

    Tolomeo, Doron; Stanyon, Roscoe R; Rocchi, Mariano

    2017-01-01

    The public human genome sequencing project utilized a hierarchical approach. A large number of BAC/PAC clones, with an insert size approximate from 50 kb to 300 kb, were identified and finely mapped with respect to the Sequence Tagged Site (STS) physical map and with respect to each other. A "golden path" of BACs, covering the entire human genome, was then selected and each clone was fully sequenced. The large number of remaining BACs was not fully sequenced, but the availability of the end sequence (~800-1000 bp) at each end allowed them to be very precisely mapped on the human genome.The search for copy number variations of the human genome used several strategies. One of these approaches took advantage of the fact that fosmid clones, contrary to BAC/PAC clones, have a fixed insert size (~40 kb) (Kidd et al., Nature 453: 56-64, 2008). In this context, the ends of ~7 million fosmid clones were sequenced, and therefore it was possible to precisely map these clones on the human genome.In summary, a large number of genomic clones (GC) are available for FISH experiments. They usually yield bright FISH signals and are extremely precious for molecular cytogenetics, and in particular cancer cytogenetics. The already-labeled probes available commercially are usually based on a combination of such GCs. The present chapter summarizes the protocols for extracting, labeling, and hybridization onto slides of DNA obtained from GC.

  3. Preparation and characterization of porous magnesium materials

    Institute of Scientific and Technical Information of China (English)

    LIU Xi-qin; LIU Zi-li; ZHANG Xiao-hong; FENG Jun-dong; YU Ta-xi

    2006-01-01

    The proper spacer material and the preparation technology for biological compatible porous magnesium materials were explored by the powder metallurgy method, and microstructures, porosity and mechanical properties of sintered porous magnesium were investigated. The results show that compared with spacer materials of NH4CO3, NH3Cl and carbamide, NH4CO3 is the best one for preparation of sintered porous magnesium, and the worst one is NH3Cl. The isolated blind pores are formed mainly by the particle interval of the magnesium powders. Adding spacer material favors the formation of open pores, while has little contribution to the formation of blind pores. The overall porosity and porosity of open pore of the sintered porous magnesium increase with the increase of added spacer material, while decrease with the increase of the molding stress. The mechanical properties of sintered porous magnesium increase with decreasing addition of spacer material and increasing molding stress.

  4. Synthesis, characterization and bioevaluation of drug-collagen hybrid materials for biomedical applications.

    Science.gov (United States)

    Voicu, Georgeta; Geanaliu-Nicolae, Ruxandra-Elena; Pîrvan, Adrian-Alexandru; Andronescu, Ecaterina; Iordache, Florin

    2016-08-30

    This work presents a study based on the preparation and characterization of drug-collagen hybrid materials. Materials used for obtaining drug-collagen hybrids were collagen type I (Coll) as matrix and fludarabine (F) and epirubicin (E) as hydrophilic active substances. After incorporation of drugs into Coll in different ratios, the obtained hybrid materials (Coll/F and Coll/E) could be used according to our results as potential drug delivery systems in medicine for the topical (local) treatment of cancerous tissues (e.g. the treatment of breast, stomach, lung, colorectal or advanced ovarian cancer). The materials were characterized considering their composition (by XRD, FT-IR and DTA-TG) and their morphology (by SEM). The delivery of drug was assessed by UV-vis. The in vitro citotoxicity demonstrates an antitumoral activity of the obtained hybrid materials and their potential use for biomedical applications as drug delivery systems in tumoral treatments.

  5. Materials, preparation, and characterization in thermoelectrics

    CERN Document Server

    Rowe, David Michael

    2012-01-01

    This book includes updated theoretical considerations which provide an insight into avenues of research most likely to result in further improvements in material performance. It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material. The book reviews the use of neutron beams to investigate phonons, whose behaviour govern the lattice thermal conductivity and includes a chapter on patents.

  6. Quantum materials. Lateral semiconductor nanostructures, hybrid systems and nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Heitmann, Detlef (ed.) [Hamburg Univ. (Germany). Inst. fuer Angewandte Physik

    2010-07-01

    Semiconductor nanostructures are ideal systems to tailor the physical properties via quantum effects, utilizing special growth techniques, self-assembling, wet chemical processes or lithographic tools in combination with tuneable external electric and magnetic fields. Such systems are called ''Quantum Materials''.The electronic, photonic, and phononic properties of these systems are governed by size quantization and discrete energy levels. The charging is controlled by the Coulomb blockade. The spin can be manipulated by the geometrical structure, external gates and by integrating hybrid ferromagnetic emitters.This book reviews sophisticated preparation methods for quantum materials based on III-V and II-VI semiconductors and a wide variety of experimental techniques for the investigation of these interesting systems. It highlights selected experiments and theoretical concepts and gives such a state-of-the-art overview about the wide field of physics and chemistry that can be studied in these systems. (orig.)

  7. Adaptive, Active and Multifunctional Composite and Hybrid Materials Program: Composite and Hybrid Materials ERA

    Science.gov (United States)

    2014-04-01

    16 4.2.4.3 Fabrication and Modeling of Rubber Muscle Actuators ..........17 4.2.4.4 Modeling of Power Response of SMP/SMA...Processing of BMI/Preceramic Polymer Blends .................................28 4.9 Task 9.0 Hybrid Material Processing and Fabrication...electrical stimulus, similar in action to the natural response of the conformation of a bird wing during flight vs. takeoff or landing, a muscle pair

  8. Preparation of Reference Material 8504, Transformer Oil

    OpenAIRE

    Poster, Dianne L.; Schantz, Michele M.; Wise, Stephen A.

    2005-01-01

    A new reference material (RM), RM 8504, has been prepared for use as a diluent oil with Aroclors in transformer oil Standard Reference Materials (SRMs) 3075 to 3080 and SRM 3090 when developing and validating methods for the determination of polychlorinated biphenyls (PCBs) as Aroclors in transformer oil or similar matrices. SRMs 3075-3080 and SRM 3090 consist of individual Aroclors in the same transformer oil that was used to prepare RM 8504. A unit of RM 8504 consists of one bottle containi...

  9. Preparation of Reference Material 8504, Transformer Oil.

    Science.gov (United States)

    Poster, Dianne L; Schantz, Michele M; Wise, Stephen A

    2005-01-01

    A new reference material (RM), RM 8504, has been prepared for use as a diluent oil with Aroclors in transformer oil Standard Reference Materials (SRMs) 3075 to 3080 and SRM 3090 when developing and validating methods for the determination of polychlorinated biphenyls (PCBs) as Aroclors in transformer oil or similar matrices. SRMs 3075-3080 and SRM 3090 consist of individual Aroclors in the same transformer oil that was used to prepare RM 8504. A unit of RM 8504 consists of one bottle containing approximately 100 mL of transformer oil. No additional constituents have been added to the oil.

  10. Preparation, Characterization and Properties of Graphene-silver Sulphide Hybrid

    Institute of Scientific and Technical Information of China (English)

    CHEN Guang-yi; WEI Zhi-yong; LIANG Ce; WANG De-jin; LIANG Ji-cai; ZHANG Wan-xi

    2012-01-01

    A facile and efficient strategy was reported for the preparation of graphene nanosheets-Ag2S hybrid by a simple hydrothermal process.First,Ag2S particles deposited on the surface of graphene oxide(GO) sheet.GO was then reduced by hydrazine hydrate to graphcne.The results of X-ray diffraction(XRD) and Fourier transform infrared(FTIR) demonstrated the efficient reduction of GO to graphene.Transmission electron microscopy(TEM) image of the sample reveals the morphology of the architecture of graphene-Ag2S hybrid.Ultraviolet-visible spectroscopy(UV-Vis) and photoluminescence(PL) measurement were further employed to study the optical properties of the obtained nanocomposite.This work can be extended to design other graphene-based hybrid nanomaterials,and the as-grown architectures may hold promise for many applications.

  11. Silver nanoprisms/silicone hybrid rubber materials and their optical limiting property to femtosecond laser

    Science.gov (United States)

    Li, Chunfang; Liu, Miao; Jiang, Nengkai; Wang, Chunlei; Lin, Weihong; Li, Dongxiang

    2017-08-01

    Optical limiters against femtosecond laser are essential for eye and sensor protection in optical processing system with femtosecond laser as light source. Anisotropic Ag nanoparticles are expected to develop into optical limiting materials for femtosecond laser pulses. Herein, silver nanoprisms are prepared and coated by silica layer, which are then doped into silicone rubber to obtain hybrid rubber sheets. The silver nanoprisms/silicone hybrid rubber sheets exhibit good optical limiting property to femtosecond laser mainly due to nonlinear optical absorption.

  12. Hybrid gate dielectric materials for unconventional electronic circuitry.

    Science.gov (United States)

    Ha, Young-Geun; Everaerts, Ken; Hersam, Mark C; Marks, Tobin J

    2014-04-15

    importance of gate dielectric materials in thin-film transistor (TFT) operation. Next, we describe the design, fabrication, properties, and applications of solution-deposited multilayer organic-inorganic hybrid gate dielectrics, using self-assembly techniques, which provide bonding between the organic and inorganic layers. Finally, we discuss approaches for preparing analogous hybrid multilayers by vapor-phase growth and discuss the properties of these materials.

  13. Synergetic Hybrid Aerogels of Vanadia and Graphene as Electrode Materials of Supercapacitors

    Directory of Open Access Journals (Sweden)

    Xuewei Fu

    2016-08-01

    Full Text Available The performance of synergetic hybrid aerogel materials of vanadia and graphene as electrode materials in supercapacitors was evaluated. The hybrid materials were synthesized by two methods. In Method I, premade graphene oxide (GO hydrogel was first chemically reduced by L-ascorbic acid and then soaked in vanadium triisopropoxide solution to obtain V2O5 gel in the pores of the reduced graphene oxide (rGO hydrogel. The gel was supercritically dried to obtain the hybrid aerogel. In Method II, vanadium triisopropoxide was hydrolyzed from a solution in water with GO particles uniformly dispersed to obtain the hybrid gel. The hybrid aerogel was obtained by supercritical drying of the gel followed by thermal reduction of GO. The electrode materials were prepared by mixing 80 wt % hybrid aerogel with 10 wt % carbon black and 10 wt % polyvinylidene fluoride. The hybrid materials in Method II showed higher capacitance due to better interactions between vanadia and graphene oxide particles and more uniform vanadia particle distribution.

  14. Titanium oxo-clusters: precursors for a Lego-like construction of nanostructured hybrid materials.

    Science.gov (United States)

    Rozes, Laurence; Sanchez, Clément

    2011-02-01

    Titanium oxo-clusters, well-defined monodispersed nano-objects, are appropriate nano-building blocks for the preparation of organic-inorganic materials by a bottom up approach. This critical review proposes to present the different structures of titanium oxo-clusters referenced in the literature and the different strategies followed to build up hybrid materials with these versatile building units. In particular, this critical review cites and reports on the most important papers in the literature, concentrating on recent developments in the field of synthesis, characterization, and the use of titanium oxo-clusters for the construction of advanced hybrid materials (137 references).

  15. Nanostructure of PDMS–TEOS–PrZr hybrids prepared by direct deposition of gamma radiation energy

    Energy Technology Data Exchange (ETDEWEB)

    Lancastre, Joana J.H., E-mail: jlancastre@ctn.ist.utl.pt [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Falcão, António N. [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Margaça, Fernanda M.A., E-mail: fmargaca@ctn.ist.utl.pt [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Ferreira, Luís M. [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139.7), 2695-066 Bobadela, LRS (Portugal); Miranda Salvado, Isabel M. [CICECO & Departamento de Engenharia de Materiais e Cerâmica, Universidade de Aveiro, Campus de Santiago, 3810-193 Aveiro (Portugal); Almásy, László [Wigner Research Centre for Physics, Institute for Solid State Physics and Optics, PO Box 49, 1525 Budapest (Hungary); Casimiro, Maria H. [REQUIMTE/CQFB, Departamento de Química, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Meiszterics, Anikó [Gedeon Richter Ltd., PO Box 27, H-1475 Budapest (Hungary)

    2015-10-15

    Highlights: • Hybrid materials were prepared by direct energy deposition. • The influence of the catalyst content (PrZr) was investigated. • The developed oxide network was found to be strongly dependent on the PrZr content. • A model is proposed for the development of the oxide network in these materials. - Abstract: Organic–inorganic materials have been the object of intense research due to their wide range of properties and therefore innumerous applications. We prepared organic–inorganic hybrid materials by direct energy deposition on a mixture of polydimethylsiloxane silanol terminated (33 wt% fixed content), tetraethylorthosilicate and a minor content of zirconium propoxide that varied from 1 to 5 wt% using gamma radiation from a Co-60 source. The samples, dried in air at room temperature, are bulk, flexible and transparent. Their nanostructure was investigated by small angle neutron scattering. It was found that the inorganic oxide network has fractal structure, which becomes denser as the zirconium propoxide content decreases. The results suggest that oxide nanosized regions grow from the OH terminal group of PDMS which are the condensation seeds. Their number and position remains unaltered with the variation of zirconium propoxide content that only affects their microstructure. A model is proposed for the nanostructure of the oxide network that develops in the irradiation processed hybrid materials.

  16. Graphene Hybrid Materials in Gas Sensing Applications †

    Science.gov (United States)

    Latif, Usman; Dickert, Franz L.

    2015-01-01

    Graphene, a two dimensional structure of carbon atoms, has been widely used as a material for gas sensing applications because of its large surface area, excellent conductivity, and ease of functionalization. This article reviews the most recent advances in graphene hybrid materials developed for gas sensing applications. In this review, synthetic approaches to fabricate graphene sensors, the nano structures of hybrid materials, and their sensing mechanism are presented. Future perspectives of this rapidly growing field are also discussed. PMID:26690156

  17. Facile preparation of super durable superhydrophobic materials.

    Science.gov (United States)

    Wu, Lei; Zhang, Junping; Li, Bucheng; Fan, Ling; Li, Lingxiao; Wang, Aiqin

    2014-10-15

    The low stability, complicated and expensive fabrication procedures seriously hinder practical applications of superhydrophobic materials. Here we report an extremely simple method for preparing super durable superhydrophobic materials, e.g., textiles and sponges, by dip coating in fluoropolymers (FPs). The morphology, surface chemical composition, mechanical, chemical and environmental stabilities of the superhydrophobic textiles were investigated. The results show how simple the preparation of super durable superhydrophobic textiles can be! The superhydrophobic textiles outperform their natural counterparts and most of the state-of-the-art synthetic superhydrophobic materials in stability. The intensive mechanical abrasion, long time immersion in various liquids and repeated washing have no obvious influence on the superhydrophobicity. Water drops are spherical in shape on the samples and could easily roll off after these harsh stability tests. In addition, this simple dip coating approach is applicable to various synthetic and natural textiles and can be easily scaled up. Furthermore, the results prove that a two-tier roughness is helpful but not essential with regard to the creation of super durable superhydrophobic textiles. The combination of microscale roughness of textiles and materials with very low surface tension is enough to form super durable superhydrophobic textiles. According to the same procedure, superhydrophobic polyurethane sponges can be prepared, which show high oil absorbency, oil/water separation efficiency and stability. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Hybrid materials: Magnetite-Polyethylenimine-Montmorillonite, as magnetic adsorbents for Cr(VI) water treatment.

    Science.gov (United States)

    Larraza, Iñigo; López-Gónzalez, Mar; Corrales, Teresa; Marcelo, Gema

    2012-11-01

    Hybrid materials formed by the combination of a sodium rich Montmorillonite (MMT), with magnetite nanoparticles (40 nm, Fe(3)O(4) NPs) coated with Polyethylenimine polymer (PEI 800 g/mol or PEI 25000 g/mol) were prepared. The intercalation of the magnetite nanoparticles coated with PEI among MMT platelets was achieved by cationic exchange. The resulting materials presented a high degree of exfoliation of the MMT sheets and a good dispersion of Fe(3)O(4) NPs on both the surface and among the layers of MMT. The presence of amine groups in the PEI structure not only aids the exfoliation of the MMT layers, but also gives to the hybrid material the necessary functionality to interact with heavy metals. These hybrid materials were used as magnetic sorbent for the removal of hexavalent chromium from water. The effect that pH, Cr(VI) concentration, and adsorbent material composition have on the Cr(VI) removal efficiency was studied. A complete characterization of the materials was performed. The hybrid materials showed a slight dependence of the removal efficiency with the pH in a wide range (1-9). A maximum amount of adsorption capacity of 8.8 mg/g was determined by the Langmuir isotherm. Results show that these hybrid materials can be considered as potential magnetic adsorbent for the Cr(VI) removal from water in a wide range of pH.

  19. Preparation and Characterization of New Geopolymer-Epoxy Resin Hybrid Mortars

    Directory of Open Access Journals (Sweden)

    Raffaele Cioffi

    2013-07-01

    Full Text Available The preparation and characterization of metakaolin-based geopolymer mortars containing an organic epoxy resin are presented here for the first time. The specimens have been prepared by means of an innovative in situ co-reticulation process, in mild conditions, of commercial epoxy based organic resins and geopolymeric slurry. In this way, geopolymer based hybrid mortars characterized by a different content of normalized sand (up to 66% in weight and by a homogeneous dispersion of the organic resin have been obtained. Once hardened, these new materials show improved compressive strength and toughness in respect to both the neat geopolymer and the hybrid pastes since the organic polymer provides a more cohesive microstructure, with a reduced amount of microcracks. The microstructural characterization allows to point out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars and concretes. A correlation between microstructural features and mechanical properties has been studied too.

  20. Fabrication and characterization of materials and structures for hybrid organic-inorganic photonics

    Science.gov (United States)

    Haško, Daniel; Chovan, Jozef; Uherek, František

    2017-03-01

    Hybrid organic-inorganic integrated photonics integrate the organic material, as a part of active layer, with inorganic structure, and it is the organic component that extends the functionalities as compared to inorganic photonics. This paper presents the results of fabrication and characterization of inorganic and organic layers, as well as of hybrid organic-inorganic structures. Inorganic oxide and nitride materials and structures were grown using plasma enhanced chemical vapor deposition. As a substrate for tested organic layers and for preparation of multilayer structures, commercially available SiO2 created by thermal oxidation on Si was used. The hybrid organic-inorganic structures were prepared by spin coating of organic materials on SiO2/Si inorganic structures. As the basic photonics devices, the testing strip inorganic and organic waveguides were fabricated using reactive ion etching. The shape of fabricated testing waveguides was trapezoidal and etched structures were able to guide the radiation. The presented technology enabled to prepare hybrid organic-inorganic structures of comparable dimensions and shape. The fabricated waveguides dimensions and shape will be used for optimisation and design of new lithographic mask to prepare photonic components with required characteristics.

  1. Super-hybrid composites - An emerging structural material

    Science.gov (United States)

    Chamis, C. C.; Lark, R. F.; Sullivan, T. L.

    1975-01-01

    Specimens of super-hybrids and advanced fiber composites were subjected to extensive tests to determine their mechanical properties, including impact and thermal fatigue. The super-hybrids were fabricated by a procedure similar to that reported by Chamis et al., (1975). Super-hybrids subjected to 1000 cycles of thermal fatigue from -100 to 300 F retained over 90% of their longitudinal flexural strength and over 75% of their transverse flexural strength; their transverse flexural strength may be as high as 8 times that of a commercially supplied boron/1100-Al composite. The thin specimen Izod longitudinal impact resistance of the super-hybrids was twice that of the boron/110-Al material. Super-hybrids subjected to transverse tensile loads exhibited nonlinear stress-strain relationships. The experimentally determined initial membrane (in-plane) and bending elastic properties of super-hybrids were predicted adequately by linear laminate analysis.

  2. Optical Waveguides from Organic/Inorganic Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Organic/inorganic material has attracted great attentions because its importance as photonic materials. We report on our recent results on organic/inorganic hybrid sol-gel materials and optical waveguides like splitter, thermo-optic switch and micro-cavity laser.

  3. Optical Waveguides from Organic/Inorganic Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    Liying Liu; Lei Xu; Wencheng Wang

    2003-01-01

    Organic/inorganic material has attracted great attentions because its importance as photonic materials. We report on our recent results on organic/inorganic hybrid sol-gel materials and optical waveguides like splitter,thermo-optic switch and micro-cavity laser.

  4. Hybrid silica luminescent materials based on lanthanide-containing lyotropic liquid crystal with polarized emission

    Energy Technology Data Exchange (ETDEWEB)

    Selivanova, N.M., E-mail: natsel@mail.ru [Kazan National Research Technological University, 68 Karl Marx Str., Kazan 420015 (Russian Federation); Vandyukov, A.E.; Gubaidullin, A.T. [A.E. Arbuzov Institute of Organic and Physical Chemistry of the Kazan Scientific Center of the Russian Academy of Sciences, 8 Acad. Arbuzov Str., Kazan 420088 (Russian Federation); Galyametdinov, Y.G. [Kazan National Research Technological University, 68 Karl Marx Str., Kazan 420015 (Russian Federation)

    2014-11-14

    This paper represents the template method for synthesis of hybrid silica films based on Ln-containing lyotropic liquid crystal and characterized by efficient luminescence. Luminescence films were prepared in situ by the sol–gel processes. Lyotropic liquid crystal (LLC) mesophases C{sub 12}H{sub 25}O(CH{sub 2}CH{sub 2}O){sub 10}H/Ln(NO{sub 3}){sub 3}·6H{sub 2}O/H{sub 2}O containing Ln (III) ions (Dy, Tb, Eu) were used as template. Polarized optical microscopy, X-ray powder diffraction, and FT-IR-spectroscopy were used for characterization of liquid crystal mesophases and hybrid films. The morphology of composite films was studied by the atomic force microscopy method (AFM). The optical properties of the resulting materials were evaluated. It was found that hybrid silica films demonstrate significant increase of their lifetime in comparison with an LLC system. New effects of linearly polarized emission revealed for Ln-containing hybrid silica films. Polarization in lanthanide-containing hybrid composites indicates that silica precursor causes orientation of emitting ions. - Highlights: • We suggest a new simple approach for creating luminescence hybrid silica films. • Ln-containing hybrid silica films demonstrate yellow, green and red emissions. • Tb(III)-containing hybrid film have a high lifetime. • We report effects of linearly polarized emission in hybrid film.

  5. Zirconia-based luminescent organic-inorganic hybrid materials with ternary europium (III) complexes bonded

    Science.gov (United States)

    Yang, Jing; Li, Zhiqiang; Xu, Yang; Wang, Yige

    2016-05-01

    In this work, a novel red-emitting organic-inorganic hybrid material with europium (III) lanthanide β-diketonate complexes linked to a zirconia was reported, which was realized by adduct formation with zirconia-tethered terpyridine moieties. Luminescence enhancement of the hybrid material has been observed compared with pure Eu(tta)3·2H2O. Transparent and strongly luminescent thin films based on PMMA were also prepared at room temperature, which are highly luminescent under UV-light irradiation and possess a promising prospect in the area of optics.

  6. 氧化石墨烯/β-环糊精超分子杂化体的制备及表征%Preparation and Characterization of Graphene Oxide/β-cyclodextrin Supramolecular Hybrid Material

    Institute of Scientific and Technical Information of China (English)

    张树鹏; 宋海欧

    2012-01-01

    利用有机合成技术及超分子自组装技术逐级合成了一种新颖的石墨烯基超分子杂化纳米材料,并利用红外(FT-IR)、X射线衍射(XRD)、透射电镜(TEM)和扫描电镜(SEM)等确认了产物的结构.同时,热重(TG)研究表明:在50-400℃的测试范围内,源于界面相互作用的提高,逐级引入的有机基团显著增加氧化石墨烯衍生物的热稳定性能.该材料在开发具有新颖性能的石墨烯基有机-无机杂化复合材料具有一定的实践意义及理论价值.%A novel hybrid material based on graphene oxide was synthesized by utilizing organic synthesis and supramolecular self-assembly techniques. And the structures of graphene derivatives and product were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscopy (SEM). Thermogravimetric analysis (TG) shows that introduction of organic groups would significantly enhance the thermal stability of derivatives based on graphene oxide in the range of 50-400℃. The nanomaterial obtained has great potential practical significance and theoretical value to develop organic-inorganic hybrid materials based on graphene with novel features.

  7. Preparation of polyaniline/sodium alanate hybrid using a spray-drying process

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, B. R., E-mail: bru-rms@yahoo.com.br, E-mail: fabiopassador@gmail.com, E-mail: pessan@ufscar.br; Passador, F. R., E-mail: bru-rms@yahoo.com.br, E-mail: fabiopassador@gmail.com, E-mail: pessan@ufscar.br; Pessan, L. A., E-mail: bru-rms@yahoo.com.br, E-mail: fabiopassador@gmail.com, E-mail: pessan@ufscar.br [Dep. de Engenharia de Materiais, Federal University of São Carlos (Brazil)

    2014-05-15

    Nowadays, hydrogen is highly interesting as an energy source, in particular in the automotive field. In fact, hydrogen is attractive as a fuel because it prevents air pollution and greenhouse emissions. One of the main problems with the utilization of hydrogen as a fuel is its on-board storage. The purpouse of this work was to develop a new hybrid material consisting of a polyaniline matrix with sodium alanate (NaAlH{sub 4}) using a spray-drying process. The polyaniline used for this experiment was synthesized by following a well-established method for the synthesis of the emeraldine base form of polyaniline using dodecylbenzenesulfonic acid as dopant. Micro particles of polyaniline/sodium alanate hybrids with 30 and 50 wt% of sodium alanate were prepared by using a spray-drying technique. Dilute solutions of polyaniline/sodium alanate were first prepared, 10g of the solid materials were mixed with 350 ml of toluene under stirring at room temperature for 24h and the solutions were dried using spray-dryer (Büchi, Switzerland) with 115°C of an inlet temperature. The hybrids were analyzed by differential scanning calorimetry, FT-IR and scanning electron microscopy (SEM). The addition of sodium alanate decreased the glass transition temperature of the hybrids when compared to neat polyaniline. FT-IR spectrum analysis was performed to identify the bonding environment of the synthesized material and was observed that simply physically mixture occurred between polyaniline and sodium alanate. The SEM images of the hybrids showed the formation of microspheres with sodium alanate dispersed in the polymer matrix.

  8. Novel blue-light-emitting hybrid materials based on oligothiophene acids and ZnO

    Science.gov (United States)

    Jiu, Tonggang; Liu, Huibiao; Fu, Liming; He, Xiaorong; Wang, Ning; Li, Yuliang; Ai, Xicheng; Zhu, Daoben

    2004-11-01

    Novel blue-light-emitting materials based on ZnO and 2,2'-bithiophene-5,5'-dicarboxylic acid (DTDA), 4',3″-dipentyl-5,2': 5',2″: 5″,2‴-quaterthiophene-2,5‴-dicarboxylic acid (QTDA) have been prepared. The hybrid materials show that the PL λmax are at 450 and 425 nm for DTDA-ZnO and QTDA-ZnO, respectively.

  9. Porous polylactic acid-silica hybrids: preparation, characterization, and study of mesenchymal stem cell osteogenic differentiation.

    Science.gov (United States)

    Pandis, Christos; Trujillo, Sara; Matos, Joana; Madeira, Sara; Ródenas-Rochina, Joaquín; Kripotou, Sotiria; Kyritsis, Apostolos; Mano, João F; Gómez Ribelles, José Luis

    2015-02-01

    A novel approach to reinforce polymer porous membranes is presented. In the prepared hybrid materials, the inorganic phase of silica is synthesized in-situ and inside the pores of aminolyzed polylactic acid (PLA) membranes by sol-gel reactions using tetraethylorthosilicate (TEOS) and glycidoxypropyltrimethoxysilane (GPTMS) as precursors. The hybrid materials present a porous structure with a silica layer covering the walls of the pores while GPTMS serves also as coupling agent between the organic and inorganic phase. The adjustment of silica precursors ratio allows the modulation of the thermomechanical properties. Culture of mesenchymal stem cells on these supports in osteogenic medium shows the expression of characteristic osteoblastic markers and the mineralization of the extracellular matrix.

  10. Hybrid metal organic scintillator materials system and particle detector

    Science.gov (United States)

    Bauer, Christina A.; Allendorf, Mark D.; Doty, F. Patrick; Simmons, Blake A.

    2011-07-26

    We describe the preparation and characterization of two zinc hybrid luminescent structures based on the flexible and emissive linker molecule, trans-(4-R,4'-R') stilbene, where R and R' are mono- or poly-coordinating groups, which retain their luminescence within these solid materials. For example, reaction of trans-4,4'-stilbenedicarboxylic acid and zinc nitrate in the solvent dimethylformamide (DMF) yielded a dense 2-D network featuring zinc in both octahedral and tetrahedral coordination environments connected by trans-stilbene links. Similar reaction in diethylformamide (DEF) at higher temperatures resulted in a porous, 3-D framework structure consisting of two interpenetrating cubic lattices, each featuring basic to zinc carboxylate vertices joined by trans-stilbene, analogous to the isoreticular MOF (IRMOF) series. We demonstrate that the optical properties of both embodiments correlate directly with the local ligand environments observed in the crystal structures. We further demonstrate that these materials produce high luminescent response to proton radiation and high radiation tolerance relative to prior scintillators. These features can be used to create sophisticated scintillating detection sensors.

  11. Organic/inorganic hybrid materials formed from TiO2 nanoparticles and polyaniline

    Directory of Open Access Journals (Sweden)

    Schnitzler Danielle C.

    2004-01-01

    Full Text Available This paper describes the synthesis and characterization of organic/inorganic hybrid materials formed from TiO2 nanoparticles and polyaniline (PANI. The preparation method is based on a sol-gel technique using titanium tetra-isopropoxide as oxide precursor, and two synthetic routes to the hybrids formation were employed, based on the addition of aniline after or before the sol formation. Different amounts of aniline were used to verify this effect on the characteristics of the formed materials. Samples were characterized by electronic spectroscopy, Raman spectroscopy, Fourier transformed infrared spectroscopy, thermal analysis, X-ray diffractometry and cyclic voltammetry. Results show that the different experimental routes are successful to produce hybrids formed by oxides nanoparticles and polyaniline in its conducting form, the emeraldine salt. There are no strong differences between the samples obtained by the two synthetic routes employed, except by the amount of polymer in the final material.

  12. Design of Bioactive Organic-inorganic Hybrid Materials with Self-setting Ability

    Energy Technology Data Exchange (ETDEWEB)

    Miyazaki, T; Machida, S; Morita, Y [Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology (Japan); Ishida, E, E-mail: tmiya@life.kyutech.ac.jp [Faculty of Engineering, Kyushu Institute of Technology (Japan)

    2011-10-29

    Paste-like materials with ability of self-setting are attractive for bone substitutes, since they can be injected from the small hole with minimized invasion to the patient. Although bone cements which set as apatite are clinically used, there is limitation on clinical applications due to their mechanical properties such as high brittleness and low fracture toughness. To overcome this problem, organic-inorganic hybrids based on a flexible polymer are attractive. We have obtained an idea for design of self-setting hybrids using polyion complex fabricated by ionic interaction of anionic and cationic polymers. We aimed at preparation of organic-inorganic hybrids exhibiting self-setting ability and bioactivity. The liquid component was prepared from cationic chitosan aqueous solution. The powder component was prepared by mixing various carrageenans with {alpha}-tricalcium phosphate ({alpha}-TCP). The obtained cements set within 1 day. Compressive strength showed tendency to increase with increase in {alpha}-TCP content in the powder component. The prepared cements formed the apatite in simulated body fluid within 3 days. Novel self-setting materials based on organic-inorganic hybrid can be designed utilizing ionic interaction of polysaccharide.

  13. Graphene/MnO{sub 2} hybrid nanosheets as high performance electrode materials for supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Mondal, Anjon Kumar, E-mail: Anjon.K.Mondal@student.uts.edu.au [Centre for Clean Energy Technology, School of Chemistry and Forensic Science, University of Technology, Sydney, Broadway, Sydney, NSW 2007 (Australia); Wang, Bei; Su, Dawei; Wang, Ying; Chen, Shuangqiang [Centre for Clean Energy Technology, School of Chemistry and Forensic Science, University of Technology, Sydney, Broadway, Sydney, NSW 2007 (Australia); Zhang, Xiaogang [College of Materials Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing (China); Wang, Guoxiu, E-mail: Guoxiu.wang@uts.edu.au [Centre for Clean Energy Technology, School of Chemistry and Forensic Science, University of Technology, Sydney, Broadway, Sydney, NSW 2007 (Australia)

    2014-01-15

    Graphene/MnO{sub 2} hybrid nanosheets were prepared by incorporating graphene and MnO{sub 2} nanosheets in ethylene glycol. Scanning electron microscopy and transmission electron microscopy analyses confirmed nanosheet morphology of the hybrid materials. Graphene/MnO{sub 2} hybrid nanosheets with different ratios were investigated as electrode materials for supercapacitors by cyclic voltammetry (CV) and galvanostatic charge–discharge in 1 M Na{sub 2}SO{sub 4} electrolyte. We found that the graphene/MnO{sub 2} hybrid nanosheets with a weight ratio of 1:4 (graphene:MnO{sub 2}) delivered the highest specific capacitance of 320 F g{sup −1}. Graphene/MnO{sub 2} hybrid nanosheets also exhibited good capacitance retention on 2000 cycles. - Highlights: • Graphene/MnO{sub 2} hybrid nanosheets with different ratios were fabricated. • The specific capacitance is strongly dependent on graphene/MnO{sub 2} ratios. • The graphene/MnO{sub 2} hybrid electrode (1:4) exhibited high specific capacitance. • The electrode retained 84% of the initial specific capacitance after 2000 cycles.

  14. Strongly coupled inorganic-nano-carbon hybrid materials for energy storage.

    Science.gov (United States)

    Wang, Hailiang; Dai, Hongjie

    2013-04-07

    The global shift of energy production from fossil fuels to renewable energy sources requires more efficient and reliable electrochemical energy storage devices. In particular, the development of electric or hydrogen powered vehicles calls for much-higher-performance batteries, supercapacitors and fuel cells than are currently available. In this review, we present an approach to synthesize electrochemical energy storage materials to form strongly coupled hybrids (SC-hybrids) of inorganic nanomaterials and novel graphitic nano-carbon materials such as carbon nanotubes and graphene, through nucleation and growth of nanoparticles at the functional groups of oxidized graphitic nano-carbon. We show that the inorganic-nano-carbon hybrid materials represent a new approach to synthesize electrode materials with higher electrochemical performance than traditional counterparts made by simple physical mixtures of electrochemically active inorganic particles and conducting carbon materials. The inorganic-nano-carbon hybrid materials are novel due to possible chemical bonding between inorganic nanoparticles and oxidized carbon, affording enhanced charge transport and increased rate capability of electrochemical materials without sacrificing specific capacity. Nano-carbon with various degrees of oxidation provides a novel substrate for nanoparticle nucleation and growth. The interactions between inorganic precursors and oxidized-carbon substrates provide a degree of control over the morphology, size and structure of the resulting inorganic nanoparticles. This paper reviews the recent development of inorganic-nano-carbon hybrid materials for electrochemical energy storage and conversion, including the preparation and functionalization of graphene sheets and carbon nanotubes to impart oxygen containing groups and defects, and methods of synthesis of nanoparticles of various morphologies on oxidized graphene and carbon nanotubes. We then review the applications of the SC-hybrid

  15. A biocompatible hybrid material with simultaneous calcium and strontium release capability for bone tissue repair

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, J. Carlos [CICECO — Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Wacha, András [Research Centre for Natural Sciences, Hungarian Academy of Sciences, Magyar Tudósok körútja 2, Budapest 1117 (Hungary); Gomes, Pedro S. [Laboratory for Bone Metabolism and Regeneration, Faculdade de Medicina Dentária, Universidade do Porto (Portugal); Alves, Luís C. [C2TN, Instituto Superior Técnico, Universidade de Lisboa, E.N.10, 2695-066 Bobadela LRS (Portugal); Fernandes, M. Helena Vaz [CICECO — Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Salvado, Isabel M. Miranda, E-mail: isabelmsalvado@ua.pt [CICECO — Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Fernandes, M. Helena R. [Laboratory for Bone Metabolism and Regeneration, Faculdade de Medicina Dentária, Universidade do Porto (Portugal)

    2016-05-01

    The increasing interest in the effect of strontium in bone tissue repair has promoted the development of bioactive materials with strontium release capability. According to literature, hybrid materials based on the system PDMS–SiO{sub 2} have been considered a plausible alternative as they present a mechanical behavior similar to the one of the human bone. The main purpose of this study was to obtain a biocompatible hybrid material with simultaneous calcium and strontium release capability. A hybrid material, in the system PDMS–SiO{sub 2}–CaO–SrO, was prepared with the incorporation of 0.05 mol of titanium per mol of SiO{sub 2}. Calcium and strontium were added using the respective acetates as sources, following a sol–gel technique previously developed by the present authors. The obtained samples were characterized by FT-IR, solid-state NMR, and SAXS, and surface roughness was analyzed by 3D optical profilometry. In vitro studies were performed by immersion of the samples in Kokubo's SBF for different periods of time, in order to determine the bioactive potential of these hybrids. Surfaces of the immersed samples were observed by SEM, EDS and PIXE, showing the formation of calcium phosphate precipitates. Supernatants were analyzed by ICP, revealing the capability of the material to simultaneously fix phosphorus ions and to release calcium and strontium, in a concentration range within the values reported as suitable for the induction of the bone tissue repair. The material demonstrated to be cytocompatible when tested with MG63 osteoblastic cells, exhibiting an inductive effect on cell proliferation and alkaline phosphatase activity. - Highlights: • A hybrid PDMS–SiO{sub 2}–CaO–SrO material was prepared with the incorporation of Ti. • Sr was released in concentrations suitable for the induction of bone tissue repair. • The material demonstrated to be cytocompatible when tested with osteoblastic cells.

  16. Preparation of layered double hydroxide/chlorophyll a hybrid nano-antennae: a key step.

    Science.gov (United States)

    Sommer Márquez, Alicia E; Lerner, Dan A; Fetter, Geolar; Bosch, Pedro; Tichit, Didier; Palomares, Eduardo

    2014-07-21

    In the first step to obtain an efficient nano-antenna in a bottom-up approach, new hybrid materials were synthesized using a set of layered double hydroxides (LDHs) with basic properties and pure chlorophyll a (Chl a). The stability of the adsorbed monolayer of Chl a was shown to be dependent on the nature and the ratio of the different metal ions present in the LDHs tested. The hybrid materials turned out to be adequate for stabilizing Chl a on Mg/Al LDHs for more than a month under ambient conditions while a limited catalytic decomposition was observed for the Ni/Al LDHs leading to the formation of pheophytin. These changes were followed by namely XRD, DR-UV-vis and fluorescence spectroscopies of the hybrid antennae and of the solutions obtained from their lixiviation with acetone or diethylether. On Mg/Al hydrotalcites the stability of the adsorbed Chl a was equivalent for values of the metal atom ratio ranging from 2 to 4. The latter hybrids should constitute a good basis to form efficient nanoscale light harvesting units following intercalation of selected dyes. This work describes an efficient preparation of Chl a that allows scale-up as well as the obtention of a stable Chl a monolayer on the surface of various LDHs.

  17. Hydrothermal synthesis for new multifunctional materials: A few examples of phosphates and phosphonate-based hybrid materials

    Science.gov (United States)

    Rueff, Jean-Michel; Poienar, Maria; Guesdon, Anne; Martin, Christine; Maignan, Antoine; Jaffrès, Paul-Alain

    2016-04-01

    Novel physical or chemical properties are expected in a great variety of materials, in connection with the dimensionality of their structures and/or with their nanostructures, hierarchical superstructures etc. In the search of new advanced materials, the hydrothermal technique plays a crucial role, mimicking the nature able to produce fractal, hyperbranched, urchin-like or snow flake structures. In this short review including new results, this will be illustrated by examples selected in two types of materials, phosphates and phosphonates, prepared by this method. The importance of the synthesis parameters will be highlighted for a magnetic iron based phosphates and for hybrids containing phosphonates organic building units crystallizing in different structural types.

  18. Hybrid And Smart Topologically Interlocking Materials

    OpenAIRE

    Khandelwal, Somesh

    2013-01-01

    This thesis explores the mechanical properties of a new class of multifunctional architectured materials, Topologically Interlocking Materials (TIMs). These materials are created as an assembly of unit elements arranged in an interlocking pattern such that the load transfer between unit elements occurs by contact only. In the absence of adhesive interaction, the tensile component of the load is carried by complementary tensile elements in the form of external constraints or integrated filamen...

  19. ZP maize hybrids as silage raw material

    Directory of Open Access Journals (Sweden)

    Terzić Dušanka

    2012-01-01

    Full Text Available Due to its yields, biomass quality and biomass suitability for ensiling, diversity of use in feedstuff, maize is one of the most important forage plants. In comparison with other forage plants, the production of silage maize results in the greatest accumulation of solar energy per area unit. The positive correlation between a high density of net energy and the concentration of net energy as well as between digestibility of organic matter and the concentration of net energy is achieved in the produced biomass of maize plant. The yield of silage maize in dependence on the genetic potential of yield and agroecological conditions of the production ranges from 12 to 25 tonnes of the total dry matter per hectare at physiological maturity for ensiling with the dry matter content of 35-42%. This study presents results obtained in the long-term scientific and research programme on the improvement of ZP maize hybrids utilisation carried out in the Department of Technological Research at the Maize Research Institute Zemun Polje. The overall presentation of biomass quality parameters of six ZP maize hybrids (ZP 158, ZP 173/8, ZP 377, ZP 440, ZP 555 and ZP 679 of different genetic backgrounds intended for silage production is given in this study. Besides, interrelationships among these factors as well as their effects on maize biomass digestibility were established.

  20. Hybrid nanostructured materials for high-performance electrochemical capacitors

    KAUST Repository

    Yu, Guihua

    2013-03-01

    The exciting development of advanced nanostructured materials has driven the rapid growth of research in the field of electrochemical energy storage (EES) systems which are critical to a variety of applications ranging from portable consumer electronics, hybrid electric vehicles, to large industrial scale power and energy management. Owing to their capability to deliver high power performance and extremely long cycle life, electrochemical capacitors (ECs), one of the key EES systems, have attracted increasing attention in the recent years since they can complement or even replace batteries in the energy storage field, especially when high power delivery or uptake is needed. This review article describes the most recent progress in the development of nanostructured electrode materials for EC technology, with a particular focus on hybrid nanostructured materials that combine carbon based materials with pseudocapacitive metal oxides or conducting polymers for achieving high-performance ECs. This review starts with an overview of EES technologies and the comparison between various EES systems, followed by a brief description of energy storage mechanisms for different types of EC materials. This review emphasizes the exciting development of both hybrid nanomaterials and novel support structures for effective electrochemical utilization and high mass loading of active electrode materials, both of which have brought the energy density of ECs closer to that of batteries while still maintaining their characteristic high power density. Last, future research directions and the remaining challenges toward the rational design and synthesis of hybrid nanostructured electrode materials for next-generation ECs are discussed. © 2012 Elsevier Ltd.

  1. Hybrid materials science: a promised land for the integrative design of multifunctional materials.

    Science.gov (United States)

    Nicole, Lionel; Laberty-Robert, Christel; Rozes, Laurence; Sanchez, Clément

    2014-06-21

    For more than 5000 years, organic-inorganic composite materials created by men via skill and serendipity have been part of human culture and customs. The concept of "hybrid organic-inorganic" nanocomposites exploded in the second half of the 20th century with the expansion of the so-called "chimie douce" which led to many collaborations between a large set of chemists, physicists and biologists. Consequently, the scientific melting pot of these very different scientific communities created a new pluridisciplinary school of thought. Today, the tremendous effort of basic research performed in the last twenty years allows tailor-made multifunctional hybrid materials with perfect control over composition, structure and shape. Some of these hybrid materials have already entered the industrial market. Many tailor-made multiscale hybrids are increasingly impacting numerous fields of applications: optics, catalysis, energy, environment, nanomedicine, etc. In the present feature article, we emphasize several fundamental and applied aspects of the hybrid materials field: bioreplication, mesostructured thin films, Lego-like chemistry designed hybrid nanocomposites, and advanced hybrid materials for energy. Finally, a few commercial applications of hybrid materials will be presented.

  2. Hybrid materials science: a promised land for the integrative design of multifunctional materials

    Science.gov (United States)

    Nicole, Lionel; Laberty-Robert, Christel; Rozes, Laurence; Sanchez, Clément

    2014-05-01

    For more than 5000 years, organic-inorganic composite materials created by men via skill and serendipity have been part of human culture and customs. The concept of ``hybrid organic-inorganic'' nanocomposites exploded in the second half of the 20th century with the expansion of the so-called ``chimie douce'' which led to many collaborations between a large set of chemists, physicists and biologists. Consequently, the scientific melting pot of these very different scientific communities created a new pluridisciplinary school of thought. Today, the tremendous effort of basic research performed in the last twenty years allows tailor-made multifunctional hybrid materials with perfect control over composition, structure and shape. Some of these hybrid materials have already entered the industrial market. Many tailor-made multiscale hybrids are increasingly impacting numerous fields of applications: optics, catalysis, energy, environment, nanomedicine, etc. In the present feature article, we emphasize several fundamental and applied aspects of the hybrid materials field: bioreplication, mesostructured thin films, Lego-like chemistry designed hybrid nanocomposites, and advanced hybrid materials for energy. Finally, a few commercial applications of hybrid materials will be presented.

  3. Novel flavonolignan hybrid antioxidants: From enzymatic preparation to molecular rationalization.

    Science.gov (United States)

    Vavříková, Eva; Křen, Vladimír; Jezova-Kalachova, Lubica; Biler, Michal; Chantemargue, Benjamin; Pyszková, Michaela; Riva, Sergio; Kuzma, Marek; Valentová, Kateřina; Ulrichová, Jitka; Vrba, Jiří; Trouillas, Patrick; Vacek, Jan

    2017-02-15

    A series of antioxidants was designed and synthesized based on conjugation of the hepatoprotective flavonolignan silybin with l-ascorbic acid, trolox alcohol or tyrosol via a C12 aliphatic linker. These hybrid molecules were prepared from 12-vinyl dodecanedioate-23-O-silybin using the enzymatic regioselective acylation procedure with Novozym 435 (lipase B) or with lipase PS. Voltammetric analyses showed that the silybin-ascorbic acid conjugate exhibited excellent electron donating ability, in comparison to the other conjugates. Free radical scavenging, antioxidant activities and cytoprotective action were evaluated. The silybin-ascorbic acid hybrid exhibited the best activities (IC50 = 30.2 μM) in terms of lipid peroxidation inhibition. The promising protective action of the conjugate against lipid peroxidation can be attributed to modulated electron transfer abilities of both the silybin and ascorbate moieties, but also to the hydrophobic C12 linker facilitating membrane insertion. This was supported experimentally and theoretically by density functional theory (DFT) and molecular dynamics (MD) calculations. The results presented here can be used in the further development of novel multipotent antioxidants and cytoprotective agents, in particular for substances acting at an aqueous/lipid interface. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  4. Preparation, photophysical characterization, and modeling of LDS722/Laponite 2D-ordered hybrid films.

    Science.gov (United States)

    Epelde-Elezcano, Nerea; Duque-Redondo, Eduardo; Martínez-Martínez, Virginia; Manzano, Hegoi; López-Arbeloa, Iñigo

    2014-08-26

    A novel hybrid material with promising optical properties for nonlinear optical applications is presented, as formed by LDS 722 organic dye confined in Laponite clay. Thin films of the hybrid material with different dye loadings have been prepared. The film thickness, the dye and water content, and the clay swelling due to guest molecule incorporation have been characterized. Then, the photophysical properties of the thin films have been studied in detail using experimental methods and molecular simulation. As the dye load increases, the hybrid films present a hypsochromic shift in absorption and a bathochromic shift in emission. The former is attributed to the increasing strength of solvation of the dye donor group, while the latter is ascribed to a switch from an intramolecular to an intermolecular charge-transfer process as the dye load increases. The LDS 722 molecules are preferentially oriented in the host clay almost in parallel to the platelet surfaces, inducing macroscopic order that makes the material responsive to polarized light.

  5. Few layered vanadyl phosphate nano sheets-MWCNT hybrid as an electrode material for supercapacitor application

    Science.gov (United States)

    Dutta, Shibsankar; De, Sukanta

    2016-05-01

    It have been already seen that 2-dimensional nano materials are the suitable choice for the supercapacitor application due to their large specific surface area, electrochemical active sites, micromechanical flexibility, expedite ion migration channel properties. Free standing hybrid films of functionalized MWCNT (- COOH group) and α-Vanadyl phosphates (VOPO42H2O) are prepared by vacuum filtering. The surface morphology and microstructure of the samples are studied by transmission electron microscope, field emission scanning electron microscope, XRD, Electrochemical properties of hybrid films have been investigated systematically in 1M Na2SO4 aqueous electrolyte. The hybrid material exhibits a high specific capacitance 236 F/g with high energy density of 65.6 Wh/Kg and a power density of 1476 W/Kg.

  6. Graphene oxide supported copper oxide nanoneedles: An efficient hybrid material for removal of toxic azo dyes

    Science.gov (United States)

    Rajesh, Rajendiran; Iyer, Sahithya S.; Ezhilan, Jayabal; Kumar, S. Senthil; Venkatesan, Rengarajan

    2016-09-01

    Herein, we report a simple, one step synthesis of hybrid copper oxide nanoneedles on graphene oxide sheets (GO-CuONNs) through sonochemical method. The present method affords a facile mean for controlling effective concentration of the active CuO nanoneedles on the graphene oxide sheets, and also offers the necessary stability to the resulting GO-CuONNs structure for adsorption transformations.Furthermore, this hybrid GO-CuONNs is successfully employed in the removal of a series of hazardous ionic organic dyes namely coomassie brilliant blue, methylene blue, congo red and amidoblack 10B. Through careful investigation of the material, we found that the synergetic effect between CuONNs and GO play a significant role in the adsorption of all the dyes studied. The prepared hybrid material contains both hydrophobic and hydrophilic environment which is expected to enhance the electrostatic interaction between the adsorbent and the dye molecules, consequently favouring the adsorption process.

  7. Conjugated Polymers/DNA Hybrid Materials for Protein Inactivation.

    Science.gov (United States)

    Zhao, Likun; Zhang, Jiangyan; Xu, Huiming; Geng, Hao; Cheng, Yongqiang

    2016-09-01

    Chromophore-assisted light inactivation (CALI) is a powerful tool for analyzing protein functions due to the high degree of spatial and temporal resolution. In this work, we demonstrate a CALI approach based on conjugated polymers (CPs)/DNA hybrid material for protein inactivation. The target protein is conjugated with single-stranded DNA in advance. Single-stranded DNA can form CPs/DNA hybrid material with cationic CPs via electrostatic and hydrophobic interactions. Through the formation of CPs/DNA hybrid material, the target protein that is conjugated with DNA is brought into close proximity to CPs. Under irradiation, CPs harvest light and generate reactive oxygen species (ROS), resulting in the inactivation of the adjacent target protein. This approach can efficiently inactivate any target protein which is conjugated with DNA and has good specificity and universality, providing a new strategy for studies of protein function and adjustment of protein activity.

  8. Hybrid Porous Materials for Controlled Release and Catalysis

    OpenAIRE

    Liu, Rui

    2010-01-01

    First reported in 1992, ordered mesoporous materials exhibit unique features, such as regular pore geometry, high surface area, and large pore volume, and have shown great potential in various applications. This dissertation combines the knowledge from the field of ordered mesoporous materials and several other research areas to design advanced hybrid porous materials for controlled release and catalysis applications.The demand for better treatment of illness has led to ever-increasing effort...

  9. Hybrid Porous Materials for Controlled Release and Catalysis

    OpenAIRE

    Liu, Rui

    2010-01-01

    First reported in 1992, ordered mesoporous materials exhibit unique features, such as regular pore geometry, high surface area, and large pore volume, and have shown great potential in various applications. This dissertation combines the knowledge from the field of ordered mesoporous materials and several other research areas to design advanced hybrid porous materials for controlled release and catalysis applications.The demand for better treatment of illness has led to ever-increasing effort...

  10. Porous carbon material containing CaO for acidic gas capture: preparation and properties.

    Science.gov (United States)

    Przepiórski, Jacek; Czyżewski, Adam; Pietrzak, Robert; Toyoda, Masahiro; Morawski, Antoni W

    2013-12-15

    A one-step process for the preparation of CaO-containing porous carbons is described. Mixtures of poly(ethylene terephthalate) with natural limestone were pyrolyzed and thus hybrid sorbents could be easily obtained. The polymeric material and the mineral served as a carbon precursor and CaO delivering agent, respectively. We discuss effects of the preparation conditions and the relative amounts of the raw materials used for the preparations on the porosity of the hybrid products. The micropore areas and volumes of the obtained products tended to decrease with increasing CaO contents. Increase in the preparation temperature entailed a decrease in the micropore volume, whereas the mesopore volume increased. The pore creation mechanism is proposed on the basis of thermogravimetric and temperature-programmed desorption measurements. The prepared CaO-containing porous carbons efficiently captured SO2 and CO2 from air. Washing out of CaO from the hybrid materials was confirmed as a suitable method to obtain highly porous carbon materials.

  11. Preparation, Characterization and Luminescent Properties of MCM-41 Type Materials Impregnated with Rare Earth Complex

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Hybrid materials incorporating Eu-(TTA)3.2H2O(hereafter designated as Eu-TTA, with TTA:thenoyltrifluoroacetone)in unmodified or modified MCM-41 by 3-aminopropyl-triethoxysilane (APTES)were prepared by impregnation method.The obtained materials were characterized using X-ray diffraction(XRD),IR and diffuse reflectance spectroscopy and luminescence spectra.All the hybrid samples exhibited the characteristic emission bands of Eu3+ under UV light excitation at room temperature, and the excitation spectra showed significant blue-shifts compared to the pure rare-earth complex. Although the red emission intensity in the modified hybrid was almost the half of the red emission intensity in the pure Eu-TTA complex at room temperature,the hybrid showed a much higher thermal stability due to the shielding character of the MCM-41host.

  12. Branch Content in Hybrid Materials using Small-Angle Scattering

    Science.gov (United States)

    Beaucage, Greg

    2005-03-01

    Inorganic/organic hybrid materials often display ramified mass- fractal structures characterized by primary particle size, aggregate size, and mass-fractal dimension. Physical properties, such as mechanical and dynamic mechanical properties and electrical conductivity (in carbon composites for instance), can not be predicted using only these structural features since such properties are intimately tied to the degree and type of branching as shown by Witten [1]. Witten suggested the use of the minimum dimension, or the related connectivity dimension, to calculate mechanical response in these hybrid systems. A viable technique to quantify the minimum dimension and connectivity dimension in hybrid materials has, until recently, been absent from the literature. This presentation will discuss the use of small-angle x-ray and neutron scattering to describe branch content in hybrid materials [2] and will outline an approach to use the minimum dimension and connectivity dimension to predict static and dynamic mechanical properties for hybrid materials based on structure [1, 3]. 1. Witten TA, Rubinstein M, Colby RH Reinforcement of Rubber by Fractal Aggregates J Phys II 3 (3): 367-383 (1993). 2. Beaucage G Determination of branch fraction and minimum dimension of mass-fractal aggregates Phys Rev E 70 (3): art. no. 031401 Part 1 (2004). 3. Kohls DJ, Beaucage G Rational design of reinforced rubber Curr Opin Solid St M 6 (3): 183-194 (2002).

  13. Zirconium oxocluster/polymer hybrid nanoparticles prepared by photoactivated miniemulsion copolymerization

    Science.gov (United States)

    Benedetti, Cesare; Flouda, Paraskevi; Antonello, Alice; Rosenauer, Christine; Pérez-Pla, Francisco F.; Landfester, Katharina; Gross, Silvia; Muñoz-Espí, Rafael

    2017-09-01

    The photoactivated free radical miniemulsion copolymerization of methyl methacrylate (MMA) and the zirconium oxocluster Zr4O2(methacrylate)12 is used as an effective and fast preparation method for polymer/inorganic hybrid nanoparticles. The oxoclusters, covalently anchored to the polymer network, act as metal-organic cross-linkers, thus improving the thermomechanical properties of the resulting hybrid nanoparticles. Benzoin carbonyl organic compounds were used as photoinitiators. The obtained materials are compared in terms of cross-linking, effectiveness of cluster incorporation, and size distribution with the analogous nanoparticles produced by using conventional thermally induced free radical miniemulsion copolymerization. The kinetics of the polymerization process in the absence and in the presence of the oxocluster is also investigated.

  14. Preparation and characterization of gold nanoparticles capped by peptide-biphenyl hybrids.

    Science.gov (United States)

    Pérez, Yolanda; Mann, Enrique; Herradón, Bernardo

    2011-07-15

    Gold nanoparticles were prepared using peptide-biphenyl hybrids (PBHs) as capping agents. AuNPs were characterized by different techniques including UV-Vis, TEM, EDX, FT-IR, elemental analysis, (1)H NMR and (13)C CP/MAS NMR spectroscopy. TEM analysis showed that AuNPs present diameters in the range of 1.8-3.7 nm, depending on the structure and the amount of the capping PBH used. FT-IR spectroscopy and solid-state (13)C NMR revealed that the carboxylic group of PBHs, especially in the case of the acid ligands, interacts with the gold surface (in the form of carboxylate). The results confirm that PBHs are excellent stabilizers of AuNPs, being one of the first examples on the use of peptidomimetics-gold hybrid materials.

  15. Nanocomposite organomineral hybrid materials. Part 3

    Directory of Open Access Journals (Sweden)

    KUDRYAVTSEV Pavel Gennadievich

    2016-06-01

    Full Text Available The paper addresses the issues of alkoxide method of sol-gel synthesis and non-hydrolytic method of sol-gel synthesis and colloidal method of sol-gel synthesis. The authors also consider an alternative approach based on the use of soluble silicates as precursors in the sol-gel technology, of nanocomposites. It was shown that nanocomposites can be produced through aerogels. The paper also analyzes the mixing technologies of nanocomposites preparation. It has been demonstrated the possibility to change the types of nano-phase which is used for obtaining nanocomposites in different approaches. Various models of packaging spherical, fibrous and layered nanoparticles, introduced into the structure of the nanocomposite, in the preparation thereof were examined.

  16. Nanocomposite organomineral hybrid materials. Part I

    Directory of Open Access Journals (Sweden)

    KUDRYAVTSEV Pavel Gennadievich

    2016-02-01

    Full Text Available The paper addresses the issues of alkoxide method of sol-gel synthesis and non-hydrolytic method of sol-gel synthesis and colloidal method of sol-gel synthesis. The authors also consider an alternative approach based on the use of soluble silicates as precursors in the sol-gel technology, of nanocomposites. It was shown that nanocomposites can be produced through aerogels. The paper also analyzes the mixing technologies of nanocomposites preparation. It has been demonstrated the possibility to change the types of nano-phase which is used for obtaining nanocomposites in different approaches. Various models of packaging spherical, fibrous and layered nanoparticles, introduced into the structure of the nanocomposite, in the preparation thereof were examined.

  17. Nanocomposite organomineral hybrid materials. Part 2

    Directory of Open Access Journals (Sweden)

    KUDRYAVTSEV Pavel Gennadievich

    2016-04-01

    Full Text Available The paper addresses the issues of alkoxide method of sol-gel synthesis and non-hydrolytic method of sol-gel synthesis and colloidal method of sol-gel synthesis. The authors also consider an alternative approach based on the use of soluble silicates as precursors in the sol-gel technology, of nanocomposites. It was shown that nanocomposites can be produced through aerogels. The paper also analyzes the mixing technologies of nanocomposites preparation. It has been demonstrated the possibility to change the types of nano-phase which is used for obtaining nanocomposites in different approaches. Various models of packaging spherical, fibrous and layered nanoparticles, introduced into the structure of the nanocomposite, in the preparation thereof were examined.

  18. Nanocomposite organomineral hybrid materials. Part I

    OpenAIRE

    KUDRYAVTSEV Pavel Gennadievich; FIGOVSKY Oleg Lvovich

    2016-01-01

    The paper addresses the issues of alkoxide method of sol-gel synthesis and non-hydrolytic method of sol-gel synthesis and colloidal method of sol-gel synthesis. The authors also consider an alternative approach based on the use of soluble silicates as precursors in the sol-gel technology, of nanocomposites. It was shown that nanocomposites can be produced through aerogels. The paper also analyzes the mixing technologies of nanocomposites preparation. It has been demonstrated the possibility t...

  19. Nanocomposite organomineral hybrid materials. Part 2

    OpenAIRE

    KUDRYAVTSEV Pavel Gennadievich; FIGOVSKY Oleg Lvovich

    2016-01-01

    The paper addresses the issues of alkoxide method of sol-gel synthesis and non-hydrolytic method of sol-gel synthesis and colloidal method of sol-gel synthesis. The authors also consider an alternative approach based on the use of soluble silicates as precursors in the sol-gel technology, of nanocomposites. It was shown that nanocomposites can be produced through aerogels. The paper also analyzes the mixing technologies of nanocomposites preparation. It has been demonstrated the possibility t...

  20. Preparation and characterization of amine functionalized graphene oxide with water soluble quantum dots for sensing material

    Science.gov (United States)

    Zaid, Mohd Hazani Mat; Abdullah, Jaafar

    2017-09-01

    Nanocomposite material has been prepared comprises of amine functionalized graphene oxide (NH2-GO) incorporation with water solube CdS Quantum dots nanoparticle to form a new composite material (NH2-GO/QDs). This composite mixture shows highly homogenous without precipitation and have been characterize by using Raman, Fourier transform infrared spectroscopy (FTIR) and the scan electron microscopy (SEM-EDX). Kinetic investigation based on DNA hybridization by cyclic voltammetry shows modified electrode able to achieve high hybridization rate can be used as electrochemical biosensor platform.

  1. Preparation, characterization and antimicrobial property of ag+- nano Chitosan/ZSM-5: novel Hybrid Biocomposites

    Directory of Open Access Journals (Sweden)

    Maasoumeh Khatamiana

    2016-10-01

    Full Text Available Objective(s: Binary hybrids of chitosan-zeolite have many interesting applications in separation and bacteriostatic activity. Materials and Methods: Template free ZSM-5 zeolite was synthesized by hydrothermal method, physical hydrogels of nano chitosan in the colloidal domain were obtained in the absence of toxic organic solvent and then nano chitosan/ZSM-5 hybrid composites with nano chitosan contents of 0.35%, 3.5%, 35% wt.% were prepared. The as prepared hybrid composites were ion-exchanged with Ag cations. Results: XRD and FT-IR results revealed a good crystalinity of as synthesized template frees ZSM-5 with BET surface area of 307 m2g-1. Presence of chitosan in composites was confirmed by XRD patterns and FT-IR spectroscopic analysis, the chitosan content in composite was obtained with TG analysis. SEM analysis of composites shows that chitosan particles were dispersed within the nanometer scale. The antimicrobial activity of different samples was investigated and the results showed that the Ag+-exchanged samples have the highest antibacterial properties. Cancer cell line A549 cell line were cultured in designated medium treated with Ag+-exchanged samples at the concentration of 0.01 to 0.5 mg/ml. After 24 and 48 hours incubation, the efficacy of Ag+-exchanged samples to treat cancer cell lines were measured by means of cell viability test via MTT assay. Concentrations of 0.05 and 0.1 mg/ml of Ag+-exchanged samples induced a very low toxicity. Conclusion: These hybrid composite materials have potential applications on tissue engineering and antimicrobial food packaging.

  2. WATER SOLUBLE PHENOLIC RESIN/SiO2 HYBRID MATERIALS PREPARED BY ORGANIC-INORGANIC COPOLYMERIZATION PROCESS AND THEIR APPLICATION%有机-无机同步聚合法制备水溶性酚醛树脂/SiO2杂化材料及其应用

    Institute of Scientific and Technical Information of China (English)

    莫军连; 齐暑华; 张冬娜; 李春华; 史艳梅

    2009-01-01

    The water soluble phenolic resin/SiO_2 hybrid materials are prepared by organic-inorganic copolymerization technique that the polymerization of phenolic resin monomers and the hydrolysis polycondensation reaction of tetraethyl orthosilicate process at the same time. FTIR and SEM analyses indicate that SiO_2 particles and phenolic resin matrix form organic-inorganic interpenetrating network, and there are strong combinations between organic-inorganic phases. DSC is applied to study the curing behavior of hybrid materials. TGA analysis indicates that the thermal stability of hybrid materials is improved after adding SiO_2 particles into phenolic resin matrix.%采用有机-无机同步聚合法使酚醛树脂(PF)的单体聚合和正硅酸乙酯(TEOS)的水解缩合反应同步进行制备了水溶性PF/SiO_2杂化材料.红外光谱分析和扫描电镜分析表明,在有机-无机同步聚合过程中,SiO_2粒子与PF基体间形成有机、无机互穿网络结构,并且实现了有机、无机两相间的强界面结合.采用差示扫描量热仪对杂化材料的固化行为进行了研究.热失重分析表明,杂化材料的耐热性能明显提高,大大拓宽了其应用范围.

  3. ARTIFICIAL NEURAL NETWORKS BASED GEARS MATERIAL SELECTION HYBRID INTELLIGENT SYSTEM

    Institute of Scientific and Technical Information of China (English)

    X.C. Li; W.X. Zhu; G. Chen; D.S. Mei; J. Zhang; K.M. Chen

    2003-01-01

    An artificial neural networks(ANNs) based gear material selection hybrid intelligent system is established by analyzing the individual advantages and weakness of expert system (ES) and ANNs and the applications in material select of them. The system mainly consists of tow parts: ES and ANNs. By being trained with much data samples,the back propagation (BP) ANN gets the knowledge of gear materials selection, and is able to inference according to user input. The system realizes the complementing of ANNs and ES. Using this system, engineers without materials selection experience can conveniently deal with gear materials selection.

  4. Preparation of porous chitosan-poly(acrylic acid)-calcium phosphate hybrid nanoparticles via mineralization

    Institute of Scientific and Technical Information of China (English)

    CHEN ChangJing; DENG Yu; YAN ErYun; HU Yong; JIANG XiQun

    2009-01-01

    In this work,the preparation of chitosan-poly(acrylic acid)-calcium phosphate hybrid nanoparticles (CS-PAA-CaP NP) based on the mineralization of calcium phosphate (CAP) on the surface of chitosan-poly (acrylic acid) nanoparticles (CS-PAA NPs) was reported. CS-PAA-CaP NPs were achieved by directly adding ammonia to the aqueous solution of CS-PAA nanoparticles or by thermal decomposition of urea in the aqueous solution of CS-PAA nanoparticles,resulting in the mineralization of CaP on the surface of CS-PAA NPs. Through these two routes,especially using urea as a pH-regulator,the precipitation of CS-PAA NPs,a common occurrence in basic environment,was avoided. The size,morphology and ingredient of CS-PAA-CaP hybrid nanoparticles were characterized by dynamic light scattering (DLS),transmission electron microscope (TEM),scanning electron microscope (SEM),thermogravimetry analysis (TGA) and X-ray diffractometer (XRD). When urea was used as the pH regulator to facilitate the mineralization during the thermal urea decomposition procedure,regular CS-PAA-CaP hybrid nanoparticles with a porosity-structural CaP shells and 400-600 nm size were obtained. TGA result revealed that the hybrid NPs contained approximately 23% inorganic component,which was consistent with the ratio of starting materials. The XRD spectra of hybrid nanoparticles indicated that dicalcium phosphate (DCP:CaHPO4) crystal was a dominant component of mineralization.The porous structure of the CS-PAA-CaP hybrid NPs might be greatly useful in pharmaceutical and other medical applications.

  5. Preparation and characterization of SiO₂/CMC/Ag hybrids with antibacterial properties.

    Science.gov (United States)

    Rangelova, Nadezhda; Aleksandrov, Lyubomir; Angelova, Tsvetelina; Georgieva, Nelly; Müller, Rudolf

    2014-01-30

    Amorphous hybrids based on sodium salt of carboxymethyl cellulose (CMC) and tetraethoxysilane (TEOS) containing silver nanoparticles were prepared by sol-gel method. The amorphous structure, morphology and antibacterial behavior were clarified. The thermal stability of obtained hybrids decreased with the increase in silver content from 0.5 to 1.5 wt%. Infrared spectra of the material suggest that the main interaction between the cellulose ether and silica network is via hydrogen bonds (bands at approximately 3,540 and 3,625 cm(-1)). According to UV-vis spectra the silver is present in two different states Ag(+) (absorption band at approximately 210 nm) and Ag(0) (band at approximately 300 nm). The different sizes of silver particles are present as clusters. It was demonstrated that these hybrids have a well pronounced antibacterial activity against B. subtilis and E. coli K12. Even the hybrid with 0.5 wt% Ag has efficient antibacterial activity for both Gram-positive and Gram-negative bacteria.

  6. [Polymeric materials for biomedical purposes obtained by radiation methods. V. hybrid artificial pancreas].

    Science.gov (United States)

    Burczak, K; Rosiak, J

    1994-01-01

    The authors present a review of works done on the elaboration of a hybrid-type artificial pancreas. The article discusses construction designs, applied polymeric materials as well as biocompatibility problems of polymeric membranes that encapsulate the Langerhans islets. On example of hydrogel membranes prepared by radiation crosslinking of poly(vinyl alcohol) (PVA) the dependence of the diffusion coefficients of glucose, insulin and immunoglobulin G on the crosslinking degree of hydrogels has been shown.

  7. Thermochemical Storage of Middle Temperature Wasted Heat by Functionalized C/Mg(OH2 Hybrid Materials

    Directory of Open Access Journals (Sweden)

    Emanuela Mastronardo

    2017-01-01

    Full Text Available For the thermochemical performance implementation of Mg(OH2 as a heat storage medium, several hybrid materials have been investigated. For this study, high-performance hybrid materials have been developed by exploiting the authors’ previous findings. Expanded graphite (EG/carbon nanotubes (CNTs-Mg(OH2 hybrid materials have been prepared through Mg(OH2 deposition-precipitation over functionalized, i.e., oxidized, or un-functionalized EG or CNTs. The heat storage performances of the carbon-based hybrid materials have been investigated through a laboratory-scale experimental simulation of the heat storage/release cycles, carried out by a thermogravimetric apparatus. This study offers a critical evaluation of the thermochemical performances of developed materials through their comparison in terms of heat storage and output capacities per mass and volume unit. It was demonstrated that both EG and CNTs improves the thermochemical performances of the storage medium in terms of reaction rate and conversion with respect to pure Mg(OH2. With functionalized EG/CNTs-Mg(OH2, (i the potential heat storage and output capacities per mass unit of Mg(OH2 have been completely exploited; and (ii higher heat storage and output capacities per volume unit were obtained. That means, for technological applications, as smaller volume at equal stored/released heat.

  8. Hybrid layer thickness and morphology: Influence of cavity preparation with air abrasion.

    Science.gov (United States)

    Barceleiro, Marcos Oliveira; de Mello, Jose Benedicto; Porto, Celso Luis de Angelis; Dias, Katia Regina Hostilio Cervantes; de Miranda, Mauro Sayao

    2011-01-01

    Dentinal surfaces prepared with air abrasion have considerably different characteristics from those prepared with conventional instruments. Different hybrid layer morphology and thickness occur, which can result in differences in the quality of restorations placed on dentinal surfaces prepared with a diamond bur compared to surfaces prepared using air abrasion. The objective of this study was to compare the hybrid layer thickness and morphology formed utilizing Scotchbond Multi-Purpose Plus (SBMP) on dentin prepared with a diamond bur in a high-speed handpiece and on dentin prepared using air abrasion. Flat dentin surfaces obtained from five human teeth were prepared using each method, then treated with the dentin adhesive system according to manufacturer's instructions. After a layer of composite was applied, specimens were sectioned, flattened, polished, and prepared for scanning electron microscopy. Ten different measurements of hybrid layer thickness were obtained along the bonded surface in each specimen. SBMP produced a 3.43 ± 0.75 µm hybrid layer in dentin prepared with diamond bur. This hybrid layer was regular and found consistently. In the air abrasion group, SBMP produced a 4.94 ± 1.28 µm hybrid layer, which was regular and found consistently. Statistical ANOVA (P = 0.05) indicated that there was a statistically significant difference between the groups. These data indicate that the air abrasion, within the parameters used in this study, provides a thick hybrid layer formation.

  9. Preparation of an imogolite/poly(acrylic acid) hybrid gel.

    Science.gov (United States)

    Lee, Hoik; Ryu, Jungju; Kim, Donghyun; Joo, Yongho; Lee, Sang Uck; Sohn, Daewon

    2013-09-15

    Many efforts in the field of hydrogels have been focused toward increasing the mechanical strength of the gel using inorganic materials. In this study, we synthesized a hydrogel that has excellent mechanical properties using surface-modified inorganic nanofibers composed of imogolite (Al2SiO3(OH)4), which is a hydrated aluminum silicate that has a hollow tube structure. Gamma ray radiation generates peroxide radicals on the nanofibers (imogolite), resulting in an additive free hybrid hydrogel. Structural optimization was carried out by changing the composition of imogolite and poly(acrylic acid). Chemical bonding between the nanofiber and the polymer was simulated by a cluster model and characterized by wide area Raman spectroscopy. The results indicate that imogolite embedded in a polymer matrix can align along the direction of an elongational force, as confirmed by small angle X-ray scattering (SAXS).

  10. Recent trends in preparation and application of carbon nanotube-graphene hybrid thin films

    Science.gov (United States)

    Thanh Dang, Van; Dung Nguyen, Duc; Thanh Cao, Thi; Le, Phuoc Huu; Tran, Dai Lam; Phan, Ngoc Minh; Chuc Nguyen, Van

    2016-09-01

    The combination of one-dimensional (1D) carbon nanotubes (CNTs) and two-dimensional (2D) graphene materials to generate three-dimensional (3D) carbon nanotube-graphene hybrid thin films (CNGHTFs) has attracted great attention owing to their intriguing properties via the synergistic effects of these two materials on their electrical, optical, and electrochemical properties in comparison with their individual components. This review aims to provide a brief introduction of recent trends in preparation methodologies and some outstanding applications of CNGHTFs. It contains two main scientific subjects. The first of these is the research on preparation techniques of CNGHTFs, including reduction agent-assisted mechanical blending of reduced graphene oxide (rGO) and CNTs, hybridization methods for layer-by-layer (LBL) assembly of CNTs and rGO sheets, multi-step methods using combinations of a solution and chemical vapor deposition (CVD) processing, one-step growth of CNGHTFs by the CVD method, and modified CVD methods via thermal deposition of carbon source on catalyst surfaces. The advantages and disadvantages of the preparation methods of CNGHTFs are presented and discussed in detail. The second scientific subject of the review is the research on some outstanding applications of CNGHTFs in various research fields, including transparent conductors, electron field emitters, field-effect transistors, biosensors and supercapacitors. In most cases, the CNGHTFs showed superior performances than those of the pristine GO/graphene or CNT materials. Therefore, the CNGHTFs exhibit as high-potential materials for various practical applications. Opportunites and challenges in the fields are also presented.

  11. Hybrid Materials of Polymer Gels with Surfactants

    Institute of Scientific and Technical Information of China (English)

    Hu Yan; Kaoru Tsujii

    2005-01-01

    @@ 1 Introduction Polymer gels have been extensively studied[1~17] since the discovery of volume phase-transition of a gel by Tanaka[1~5]. As a unique soft material, gels attract much attention and are tried to be applied for drug-delivery systgems[6], actuators or chemo-mechanical devices[7~9] and so on. In particular, controlled-release of small molecules from a gel is now a subject of special interest[10].

  12. Nanocellulose Derivative/Silica Hybrid Core-Shell Chiral Stationary Phase: Preparation and Enantioseparation Performance

    Directory of Open Access Journals (Sweden)

    Xiaoli Zhang

    2016-05-01

    Full Text Available Core-shell silica microspheres with a nanocellulose derivative in the hybrid shell were successfully prepared as a chiral stationary phase by a layer-by-layer self-assembly method. The hybrid shell assembled on the silica core was formed using a surfactant as template by the copolymerization reaction of tetraethyl orthosilicate and the nanocellulose derivative bearing triethoxysilyl and 3,5-dimethylphenyl groups. The resulting nanocellulose hybrid core-shell chiral packing materials (CPMs were characterized and packed into columns, and their enantioseparation performance was evaluated by high performance liquid chromatography. The results showed that CPMs exhibited uniform surface morphology and core-shell structures. Various types of chiral compounds were efficiently separated under normal and reversed phase mode. Moreover, chloroform and tetrahydrofuran as mobile phase additives could obviously improve the resolution during the chiral separation processes. CPMs still have good chiral separation property when eluted with solvent systems with a high content of tetrahydrofuran and chloroform, which proved the high solvent resistance of this new material.

  13. Bridged polysilsesquioxanes: Hybrid organic-inorganic materials as fuel cell polyelectrolyte membranes and functional nanoparticles

    Science.gov (United States)

    Khiterer, Mariya

    2007-05-01

    This dissertation describes the design, fabrication, and characterization of organic-inorganic hybrid materials. Several classes of bridged polysilsesquioxanes are presented. The first class is a membrane material suitable for fuel cell technology as a proton conducting polyelectrolyte. The second class includes hybrid nanoparticles for display device applications and chromatographic media. Chapter 1 is an introduction to hybrid organic-inorganic materials. Sol-gel chemistry is discussed, followed by a survey of prominent examples of silica hybrids. Examples of physical organic-silica blends and covalent organo-silicas, including ORMOCERSRTM, polyhedral oligomeric silsesquioxanes, and bridged polysilsesquioxanes are discussed. Bridged polysilsesquioxanes are described in great detail. Monomer synthesis, sol-gel chemistry, processing, characterization, and physical properties are included. Chapter 2 describes the design of polyelectrolyte bridged polysilsesquioxane membranes. The materials contain covalently bound sulfonic acid groups originating from the corresponding disulfides. These organic-inorganic hybrid materials integrate a network supporting component which is systematically changed to fine-tune their physical properties. The membranes are characterized as PEM fuel cell electrolytes, where proton conductivities of 4-6 mS cm-1 were measured. In Chapter 3 techniques for the preparation of bridged polysilsesquioxane nanoparticles are described. An inverse water-in-oil microemulsion polymerization method is developed to prepare cationic nanoparticles, including viologen-bridged materials with applications in electrochromic display devices. An aqueous ammonia system is used to prepare neutral nanoparticles containing hydrocarbon bridging groups, which have potential applications as chromatographic media. Chapter 4 describes electrochromic devices developed in collaboration with the Heflin group of Virginia Tech, which incorporate viologen bridged nanoparticles

  14. Hybrid anisotropic materials for wind power turbine blades

    CERN Document Server

    Golfman, Yosif

    2012-01-01

    Based on rapid technological developments in wind power, governments and energy corporations are aggressively investing in this natural resource. Illustrating some of the crucial new breakthroughs in structural design and application of wind energy generation machinery, Hybrid Anisotropic Materials for Wind Power Turbine Blades explores new automated, repeatable production techniques that expand the use of robotics and process controls. These practices are intended to ensure cheaper fabrication of less-defective anisotropic material composites used to manufacture power turbine blades. This boo

  15. Preparation of alpha-bisabolol and phenylethyl resorcinol/TiO2 hybrid composites for potential applications in cosmetics.

    Science.gov (United States)

    Leong, H J; Jang, I; Hyun, K-S; Jung, S-K; Hong, G-H; Jeong, H-A; Oh, S-G

    2016-10-01

    Bifunctional alpha-bisabolol and phenylethyl resorcinol/TiO2 hybrids were prepared to apply in cosmetic fields, particularly in anti-ageing and hyperpigmentation treatment. The synergistic effect of combined antioxidant and UV filtering properties was achieved through functionalization of TiO2 particles with skin-lightening materials such as alpha-bisabolol and phenylethyl resorcinol. TiO2 microspheres with a diameter of about 1 μm were synthesized through surfactant-assisted sol-gel method for use as supporting materials in the formation of hybrid composites. Carboxylation treatment was performed for surface modification of the TiO2 surface with carboxyl groups as chemical binders. Esterification reaction between carboxyl groups of carboxylated TiO2 and hydroxyl groups of alpha-bisabolol or phenylethyl resorcinol was performed. The hybrids were characterized using various techniques such as FE-SEM, DLS, EDS, ATR-FTIR, XPS and TGA. For application of prepared TiO2 composites in the field of cosmetics, the anti-radicular antioxidant abilities were evaluated using ABTS and DPPH colorimetric antioxidant assay. Organic/inorganic hybrid composites were successfully formed using esterification reaction between the carboxyl groups at TiO2 surface and the hydroxyl groups of the skin-lightening materials. The results demonstrate that both functionalized microspheres show scavenging ability towards the ABTS(•) and DPPH(•) radicals. Specifically, the phenylethyl resorcinol/TiO2 composites exhibited the highest antioxidant ability among the prepared samples owing to the presence of phenolic groups to scavenge free radicals. Using this strategy, it could be possible to prepare not only inorganic UV filter but also hybrid organic/inorganic materials with multifunctions and advantages which would be in a great demand for cosmetic applications. © 2016 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  16. Amine-oxide hybrid materials for acid gas separations

    KAUST Repository

    Bollini, Praveen

    2011-01-01

    Organic-inorganic hybrid materials based on porous silica materials functionalized with amine-containing organic species are emerging as an important class of materials for the adsorptive separation of acid gases from dilute gas streams. In particular, these materials are being extensively studied for the adsorption of CO 2 from simulated flue gas streams, with an eye towards utilizing these materials as part of a post-combustion carbon capture process at large flue gas producing installations, such as coal-fired electricity-generating power plants. In this Application Article, the utilization of amine-modified organic-inorganic hybrid materials is discussed, focusing on important attributes of the materials, such as (i) CO 2 adsorption capacities, (ii) adsorption and desorption kinetics, and (iii) material stability, that will determine if these materials may one day be useful adsorbents in practical CO 2 capture applications. Specific research needs and limitations associated with the current body of work are identified. © 2011 The Royal Society of Chemistry.

  17. Polymer/Carbon-Based Hybrid Aerogels: Preparation, Properties and Applications

    Directory of Open Access Journals (Sweden)

    Lizeng Zuo

    2015-10-01

    Full Text Available Aerogels are synthetic porous materials derived from sol-gel materials in which the liquid component has been replaced with gas to leave intact solid nanostructures without pore collapse. Recently, aerogels based on natural or synthetic polymers, called polymer or organic aerogels, have been widely explored due to their porous structures and unique properties, such as high specific surface area, low density, low thermal conductivity and dielectric constant. This paper gives a comprehensive review about the most recent progresses in preparation, structures and properties of polymer and their derived carbon-based aerogels, as well as their potential applications in various fields including energy storage, adsorption, thermal insulation and flame retardancy. To facilitate further research and development, the technical challenges are discussed, and several future research directions are also suggested in this review.

  18. Hybrid fiber reinforcement and crack formation in Cementitious Composite Materials

    DEFF Research Database (Denmark)

    Pereira, E.B.; Fischer, Gregor; Barros, J.A.O.

    2011-01-01

    reinforcement systems. The research described in this paper shows that the multi-scale conception of cracking and the use of hybrid fiber reinforcements do not necessarily result in an improved tensile behavior of the composite. Particular material design requirements may nevertheless justify the use of hybrid......- to the macroscale. In this study, the performance of different fiber reinforced cementitious composites is assessed in terms of their tensile stress-crack opening behavior. The results obtained from this investigation allow a direct quantitative comparison of the behavior obtained from the different fiber...

  19. High electrochemical properties of graphene nanoribbons-hybridized manganese dioxide as cathode material for lithium battery

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Xiangyue; Fan, Zihan; Lin, Cunli; Jia, Lina; Lin, Baiwei; Wang, Jiaqi; Hu, Xiaolin, E-mail: linamethyst@fzu.edu.cn; Zhuang, Naifeng, E-mail: nfzhuang@fzu.edu.cn [Fuzhou University, College of Chemistry (China)

    2015-02-15

    Manganese dioxide crystallite and its composite hybridized with graphene nanoribbons (GNRs) are prepared by hydrothermal method. The effects of reaction temperature and time, surfactant, and reducing Mn resource are discussed. As the cathode material for Li battery, γ-MnO{sub 2} nanowire/nanorod hybridizing with (GNRs) (γ-MnO{sub 2}/GNRs) shows a higher discharge specific capacity than it covering with carbon nanotubes or graphene sheets. In addition, the discharge specific capacity of γ-MnO{sub 2}/GNRs is much higher than those of pure β-MnO{sub 2} and compact β-MnO{sub 2}/GNRs. The effects of crystal size, morphology, and GNR hybrid on the discharge specific capacity are discussed.

  20. Hybrid supercapacitor-battery materials for fast electrochemical charge storage.

    Science.gov (United States)

    Vlad, A; Singh, N; Rolland, J; Melinte, S; Ajayan, P M; Gohy, J-F

    2014-03-07

    High energy and high power electrochemical energy storage devices rely on different fundamental working principles--bulk vs. surface ion diffusion and electron conduction. Meeting both characteristics within a single or a pair of materials has been under intense investigations yet, severely hindered by intrinsic materials limitations. Here, we provide a solution to this issue and present an approach to design high energy and high power battery electrodes by hybridizing a nitroxide-polymer redox supercapacitor (PTMA) with a Li-ion battery material (LiFePO4). The PTMA constituent dominates the hybrid battery charge process and postpones the LiFePO4 voltage rise by virtue of its ultra-fast electrochemical response and higher working potential. We detail on a unique sequential charging mechanism in the hybrid electrode: PTMA undergoes oxidation to form high-potential redox species, which subsequently relax and charge the LiFePO4 by an internal charge transfer process. A rate capability equivalent to full battery recharge in less than 5 minutes is demonstrated. As a result of hybrid's components synergy, enhanced power and energy density as well as superior cycling stability are obtained, otherwise difficult to achieve from separate constituents.

  1. Preparation of hybrid scaffold from fibrin and biodegradable polymer fiber.

    Science.gov (United States)

    Hokugo, Akishige; Takamoto, Tomoaki; Tabata, Yasuhiko

    2006-01-01

    A biodegradable hybrid scaffold was prepared from fibrin and poly(glycolic acid) (PGA) fiber. Mixed fibrinogen and thrombin solution homogeneously dispersed in the presence of various amounts (0, 1.5, 3.0, and 6.0mg) of PGA fiber was freeze-dried to obtain fibrin sponges with or without PGA fiber incorporation. By scanning electron microscopy observation, the fibrin sponges had an interconnected pore structure, irrespective of the amount of PGA fiber incorporated. PGA fiber incorporation enabled the fibrin sponges to significantly enhance their compression strength. In vitro cell culture studies revealed that the number of L929 fibroblasts initially attached was significantly larger for any fibrin sponge with PGA fiber incorporation than for the fibrin sponge without PGA fiber. The shrinkage of sponges after cell seeding was suppressed by fiber incorporation. It is possible that the shrinkage suppression of sponges maintains their intraspace, resulting in the superior cell attachment of a sponge with PGA fiber incorporation. After subcutaneous implantation into the backs of mice, the residual volume of a fibrin sponge with PGA fiber incorporation was significant compared with that of a fibrin sponge without PGA fiber. Larger number of cells infiltrated deep inside the fibrin sponges with PGA fiber incorporation implanted subcutaneously. It is concluded that the fibrin sponge reinforced by fiber incorporation is a promising three-dimensional scaffold of cells for tissue engineering.

  2. Preparation and characterization of polyimide/silica hybrid films

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ming-yan; ZENG Shu-jin; DONG Tie-quan; ZHOU Sheng; FAN Yong; ZHANG Xiao-hong; LEI Qing-quan

    2006-01-01

    A kind of hybrid polyimide films was prepared by synthesizing poly( amic acid ) /Silica matrix resin through sol-gel technique and then followed by positing it on a silex glass plate and drying at high temperature.The effect of silica content on the corona-resistant property of the films was studied. The miscibility between the organic and inorganic phases and its effect on the corona-resistant property were investigated with aminopropyltriethoxysilane, which served as a coupling agent, added into the polyimide composite system. The chemical structure and the surface morphology of the films were characterized by FTIR and AFM respectively. The corona-resistant property of the films was tested by a rod-plate electrode. It proved that the corona-resistant property was enhanced with silica content. It also turned ont that the improvement of the miscibility between the two phases due to the presence of covalent force as a result of the addition of the coupling agent had, to some extent,effect on the corona-resistant property of the films. Furthermore, a theory on the corona-resistant property was put forward preliminarily.

  3. Photochromic ordered mesoporous hybrid materials based on covalently grafted polyoxometalates.

    Science.gov (United States)

    Luo, Xiujuan; Yang, Chun

    2011-05-07

    Novel polyoxometalate (POM)-grafting mesoporous hybrid silicas, XW(11)/MHS (X=P, Si) and TBAPW(11)Si(2)/MHS, have been prepared respectively by co-condensation and post-synthesis routes based on the employment of Keggin-type monovacant XW(11) or a Si-substituted compound TBAPW(11)Si(2) as POM precursors. Upon characterization of the samples by FT-IR, XRD, ICP-AES, TEM and N(2) adsorption-desorption measurement, it was found that Keggin units were retained perfectly in ordered hexagonal mesopore channels with SBA-15 architecture and immobilized by covalent linkages on the mesopore wall. These materials, especially the co-condensed samples, exhibited stable and reversible photochromic properties under UV irradiation although no special organic component was supplied additionally as an electron donor. An investigation of the photochromism revealed that the photochromic response depended on the centre atom of the POM species (i.e., the redox potential of the POM), the content of the POM and the synthetic route of the sample, while the bleaching process was correlated not only to the redox potential but also to the pore size of the sample. The photochromic mechanism was also studied in detail by cyclic voltammetry, ESR, FT-IR and XPS techniques. It was found that the remaining P123 template acted as a reducing agent and was oxidized during the photochromic process accompanied by the reduction of the POM to heteropolyblue. Thus, a close contact between the POM and the remaining P123 chain in the sample is necessary. Low close-contact degree results in poor photochromic behavior of the post-synthesized sample and impregnated samples.

  4. PREPARATION AND PROPERTIES OF SPAES-TiO_2 HYBRID MEMBRANES FOR DIRECT METHANOL FUEL CELL

    Institute of Scientific and Technical Information of China (English)

    Ni Zhang; Hui-ling Liu; Jun-jing Li; Zhi Xia

    2009-01-01

    Sulfonated poly(arylene ether sulfone) (SPAES) copolymer with degree of sulfonation of 1.0 was synthesized and characterized. A series of SPAES-TiO_2 hybrid membranes with various contents of nano-sized TiO_2 particles were prepared and characterized through sol-gel reactions. Scanning electron microscopy (SEM) images indicated the TiO_2 particles were well dispersed within polymer matrix. These composite membranes were evaluated for proton exchange membranes (PEMs) in direct methanol fuel cell (DMFC). These membranes showed good thermal stability and mechanical properties. It was found that the water uptake of these membranes increased with the increase of the TiO_2 contents in the hybrid membranes. Meanwhile, the introduction of inorganic particles increased the proton conductivity and reduced the methanol permeability. The proton conductivities (0.118-0.162 S/cm) of SPAES-TiO_2 hybrid membranes with 8% TiO_2 particles are much higher than those of Nation 117 membrane (0.095-0.117 S/cm) and pure SPAES membrane (0.100-0.124 S/cm) with degree of sulfonation of 1.0 at all temperatures (25-100℃). Especially, the methanol diffusion coefficient (8.4×10~(-7) cm~2/s) of SPAES-TiO_2 hybrid membranes with 8% TiO_2 is much lower than that of Nation 117 membrane (2.1 ×10~(-6) cm~2/s). SPAES-TiO_2 hybrid membranes were therefore proposed as candidates of material for PEM in DMFC.

  5. Epitaxially Grown Layered MFI–Bulk MFI Hybrid Zeolitic Materials

    KAUST Repository

    Kim, Wun-gwi

    2012-11-27

    The synthesis of hybrid zeolitic materials with complex micropore-mesopore structures and morphologies is an expanding area of recent interest for a number of applications. Here we report a new type of hybrid zeolite material, composed of a layered zeolite material grown epitaxially on the surface of a bulk zeolite material. Specifically, layered (2-D) MFI sheets were grown on the surface of bulk MFI crystals of different sizes (300 nm and 10 μm), thereby resulting in a hybrid material containing a unique morphology of interconnected micropores (∼0.55 nm) and mesopores (∼3 nm). The structure and morphology of this material, referred to as a "bulk MFI-layered MFI" (BMLM) material, was elucidated by a combination of XRD, TEM, HRTEM, SEM, TGA, and N2 physisorption techniques. It is conclusively shown that epitaxial growth of the 2-D layered MFI sheets occurs in at least two principal crystallographic directions of the bulk MFI crystal and possibly in the third direction as well. The BMLM material combines the properties of bulk MFI (micropore network and mechanical support) and 2-D layered MFI (large surface roughness, external surface area, and mesoporosity). As an example of the uses of the BMLM material, it was incorporated into a polyimide and fabricated into a composite membrane with enhanced permeability for CO2 and good CO2/CH4 selectivity for gas separations. SEM-EDX imaging and composition analysis showed that the polyimide and the BMLM interpenetrate into each other, thereby forming a well-adhered polymer/particle microstructure, in contrast with the defective interfacial microstructure obtained using bare MFI particles. Analysis of the gas permeation data with the modified Maxwell model also allows the estimation of the effective volume of the BMLM particles, as well as the CO2 and CH4 gas permeabilities of the interpenetrated layer at the BMLM/polyimide interface. © 2012 American Chemical Society.

  6. Nanostructure of PDMS-TEOS-PrZr hybrids prepared by direct deposition of gamma radiation energy

    Science.gov (United States)

    Lancastre, Joana J. H.; Falcão, António N.; Margaça, Fernanda M. A.; Ferreira, Luís M.; Miranda Salvado, Isabel M.; Almásy, László; Casimiro, Maria H.; Meiszterics, Anikó

    2015-10-01

    Organic-inorganic materials have been the object of intense research due to their wide range of properties and therefore innumerous applications. We prepared organic-inorganic hybrid materials by direct energy deposition on a mixture of polydimethylsiloxane silanol terminated (33 wt% fixed content), tetraethylorthosilicate and a minor content of zirconium propoxide that varied from 1 to 5 wt% using gamma radiation from a Co-60 source. The samples, dried in air at room temperature, are bulk, flexible and transparent. Their nanostructure was investigated by small angle neutron scattering. It was found that the inorganic oxide network has fractal structure, which becomes denser as the zirconium propoxide content decreases. The results suggest that oxide nanosized regions grow from the OH terminal group of PDMS which are the condensation seeds. Their number and position remains unaltered with the variation of zirconium propoxide content that only affects their microstructure. A model is proposed for the nanostructure of the oxide network that develops in the irradiation processed hybrid materials.

  7. Preparation of Dye Using Selected Local Materials | Alamu ...

    African Journals Online (AJOL)

    Preparation of Dye Using Selected Local Materials. ... RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... Nigeria produce juice that can permanently stick to clothing materials.

  8. Charge transfer and surface defect healing within ZnO nanoparticle decorated graphene hybrid materials

    Science.gov (United States)

    Pham, Chuyen V.; Repp, Sergej; Thomann, Ralf; Krueger, Michael; Weber, Stefan; Erdem, Emre

    2016-05-01

    To harness the unique properties of graphene and ZnO nanoparticles (NPs) for novel applications, the development of graphene-ZnO nanoparticle hybrid materials has attracted great attention and is the subject of ongoing research. For this contribution, graphene-oxide-ZnO (GO-ZnO) and thiol-functionalized reduced graphene oxide-ZnO (TrGO-ZnO) nanohybrid materials were prepared by novel self-assembly processes. Based on electron paramagnetic resonance (EPR) and photoluminescence (PL) investigations on bare ZnO NPs, GO-ZnO and TrGO-ZnO hybrid materials, we found that several physical phenomena were occurring when ZnO NPs were hybridized with GO and TrGO. The electrons trapped in Zn vacancy defects (VZn-) within the core of ZnO NPs vanished by transfer to GO and TrGO in the hybrid materials, thus leading to the disappearance of the core signals in the EPR spectra of ZnO NPs. The thiol groups of TrGO and sulfur can effectively ``heal'' the oxygen vacancy (VO+) related surface defects of ZnO NPs while oxygen-containing functionalities have low healing ability at a synthesis temperature of 100 °C. Photoexcited electron transfer from the conduction band of ZnO NPs to graphene leads to photoluminescence (PL) quenching of near band gap emission (NBE) of both GO-ZnO and TrGO-ZnO. Simultaneously, electron transfer from graphene to defect states of ZnO NPs is the origin of enhanced green defect emission from GO-ZnO. This observation is consistent with the energy level diagram model of hybrid materials.To harness the unique properties of graphene and ZnO nanoparticles (NPs) for novel applications, the development of graphene-ZnO nanoparticle hybrid materials has attracted great attention and is the subject of ongoing research. For this contribution, graphene-oxide-ZnO (GO-ZnO) and thiol-functionalized reduced graphene oxide-ZnO (TrGO-ZnO) nanohybrid materials were prepared by novel self-assembly processes. Based on electron paramagnetic resonance (EPR) and photoluminescence (PL

  9. Dispersing perylene diimide/SWCNT hybrids: structural insights at the molecular level and fabricating advanced materials.

    Science.gov (United States)

    Tsarfati, Yael; Strauss, Volker; Kuhri, Susanne; Krieg, Elisha; Weissman, Haim; Shimoni, Eyal; Baram, Jonathan; Guldi, Dirk M; Rybtchinski, Boris

    2015-06-17

    The unique properties of carbon nanotubes (CNT) are advantageous for emerging applications. Yet, the CNT insolubility hampers their potential. Approaches based on covalent and noncovalent methodologies have been tested to realize stable dispersions of CNTs. Noncovalent approaches are of particular interest as they preserve the CNT's structures and properties. We report on hybrids, in which perylene diimide (PDI) amphiphiles are noncovalently immobilized onto single wall carbon nanotubes (SWCNT). The resulting hybrids were dispersed and exfoliated both in water and organic solvents in the presence of two different PDI derivatives, PP2b and PP3a. The dispersions were investigated using cryogenic transmission electron microscopy (cryo-TEM), providing unique structural insights into the exfoliation. A helical arrangement of PP2b assemblies on SWCNTs dominates in aqueous dispersions, while a single layer of PP2b and PP3a was found on SWCNTs in organic dispersions. The dispersions were probed by steady-state and time-resolved spectroscopies, revealing appreciable charge redistribution in the ground state, and an efficient electron transfer from SWCNTs to PDIs in the excited state. We also fabricated hybrid materials from the PP2b/SWCNT dispersions. A supramolecular membrane was prepared from aqueous dispersions and used for size-selective separation of gold nanoparticles. Hybrid buckypaper films were prepared from the organic dispersions. In the latter, high conductivity results from enhanced electronic communication and favorable morphology within the hybrid material. Our findings shed light onto SWCNT/dispersant molecular interactions, and introduce a versatile approach toward universal solution processing of SWCNT-based materials.

  10. Organic/inorganic hybrid materials: challenges for ab initio methodology.

    Science.gov (United States)

    Draxl, Claudia; Nabok, Dmitrii; Hannewald, Karsten

    2014-11-18

    CONSPECTUS: Organic/inorganic hybrid structures are most exciting since one can expect new properties that are absent in either of their building blocks. They open new perspectives toward the design and tailoring of materials with desired features and functions. Prerequisite for real progress is, however, the in-depth understanding of what happens on the atomic and electronic scale. In this respect, hybrid materials pose a challenge for electronic-structure theory. Methods that proved useful for describing one side may not be applicable for the other one, and they are likely to fail for the interfaces. In this Account, we address the question to what extent we can quantitatively describe hybrid materials and where we even miss a qualitative description. We note that we are dealing with extended systems and thus adopt a solid-state approach. Therefore, density-functional theory (DFT) and many-body perturbation theory (MBPT), the GW approach for charged and the Bethe-Salpeter equation for neutral excitations, are our methods of choice. We give a brief summary of the used methodology, focusing on those aspects where problems can be expected when materials of different character meet at an interface. These issues are then taken up when discussing hybrid materials. We argue when and why, for example, standard DFT may fall short when it comes to the electronic structure of organic/metal interfaces or where the framework of MBPT can or must take over. Selected examples of organic/inorganic interfaces, structural properties, electronic bands, optical excitation spectra, and charge-transport properties as obtained from DFT and MBPT highlight which properties can be reliably computed for such materials. The crucial role of van der Waals forces is shown for sexiphenyl films, where the subtle interplay between intermolecular and molecule-substrate interactions is decisive for growth and morphologies. With a PTCDA monolayer on metal surfaces we discuss the performance of DFT in

  11. Solution-processed hybrid materials for light detection

    Science.gov (United States)

    Adinolfi, Valerio

    Inorganic semiconductors form the foundation of modern electronics and optoelectronics. These materials benefit from excellent optoelectronic properties, but applications are generally limited due to high cost of fabrication. More recently, organic semiconductors have emerged as a low-cost alternative for light emitting devices. Organic materials benefit from facile, low temperature fabrication and offer attractive features such as flexibility and transparency. However, these materials are inherently limited by poor electronic transport. In recent years, new materials have been developed to overcome the dichotomy between performance and the cost. Hybrid organic--inorganic semiconductors combine the superior electronic properties of inorganic materials with the facile assembly of organic systems to yield high-performance, low-cost electronics. This dissertation focuses on the development of solution-processed light detectors using hybrid material systems, particularly colloidal quantum dots (CQDs) and hybrid perovskites. First, advanced architectures for colloidal quantum dot light detectors are presented. These devices overcome the responsivity--speed--dark current trade-off that has limited past reports of CQD-based devices. The photo-junction field effect transistors presented in this work decrease the dark current of CQD detectors by two orders of magnitude, ultimately reducing power consumption (100x) and noise current (10x). The detector simultaneously benefits from high gain (˜10 electrons/photon) and fast time response (˜ 10 mus). This represents the first CQD-based three-terminal-junction device reported in the literature. Building on this success, hybrid perovskite devices are then presented. This material system has become a focal point of the semiconductor research community due to its relatively unexplored nature and attractive optoelectronic properties. Herein we present the first extensive electronic characterization of single crystal organolead

  12. New organic-inorganic hybrid material based on functional cellulose nanowhisker, polypseudorotaxane and Au nanorods.

    Science.gov (United States)

    Garavand, Ali; Dadkhah Tehrani, Abbas

    2016-11-05

    Organic-inorganic functional hybrid materials play a major role in the development of advanced functional materials and recently have gained growing interest of the worldwide community. In this context, new hybrid organic-inorganic gel consisting of cellulose nanowhisker xanthate (CNWX) and S-H functionalized polypseudorotaxane (PPR) as organic parts of gel and gold nanorods (GNRs) as inorganic cross-linking agent were prepared. Firstly, thiolated α-cyclodextrin (α-CD-SH) was threaded onto poly-(ethylene glycol) bis (mercaptoethanoate ester) (PEG-SH) to give polypseudorotaxane (PPR) and then it reacted with GNRs in the presence of CNWX to give the new hybrid gel material. The new synthesized gel and its components characterized by spectroscopic measurement methods such as FT-IR, UV-vis and NMR spectroscopy. Interestingly, hybrid gel showed new polygonal plate like morphology with 45-60nm thickness and 400-600nm width. The obtained gel may have potential application in many fields especially in biomedical applications.

  13. Biological evaluation of zirconia/PEG hybrid materials synthesized via sol-gel technique.

    Science.gov (United States)

    Catauro, M; Papale, F; Bollino, F; Gallicchio, M; Pacifico, S

    2014-07-01

    The objective of the following study has been the synthesis via sol-gel and the characterization of novel organic-inorganic hybrid materials to be used in biomedical field. The prepared materials consist of an inorganic zirconia matrix containing as organic component the polyethylene glycol (PEG), a water-soluble polymer used in medical and pharmaceutical fields. Various hybrids have been synthesized changing the molar ratio between the organic and inorganic parts. Fourier transform spectroscopy suggests that the structure of the interpenetrating network is realized by hydrogen bonds between the Zr-OH group in the sol-gel intermediate species and both the terminal alcoholic group and ethereal oxygen atoms in the repeating units of polymer The amorphous nature of the gels has been ascertained by X-ray diffraction analysis. The morphology observation has been carried out by using the Scanning Electron Microscope and has confirmed that the obtained materials are nanostructurated hybrids. The bioactivity of the synthesized system has been shown by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating the human blood plasma. The potential biocompatibility of hybrids has been assessed as performing indirect MTT cytotoxicity assay towards 3T3 cell line at 24, 48, and 72 h exposure times. Copyright © 2014. Published by Elsevier B.V.

  14. The preparation and properties of UV-curable organic-inorganic hybrid materials%紫外光固化纳米溶胶/聚氨酯丙烯酸酯杂化材料的制备与性能

    Institute of Scientific and Technical Information of China (English)

    夏秉乾; 贺建芸; 覃伟武; 杨爱军

    2011-01-01

    A nano-sol has been prepared by a sol-gel method using γ-methacryloxypropyltrimethoxysilane. The mi-crostructure of the nano-sol was characterized by FT-IR, NMR and SEM. Urethane acrylate was prepared using polyester polyols, toluene diisocyanate (TDI) and 2-hydroxyethyl acrylate (HEA) and UV hybrid films were formulated using the nano-sol, the urethane acrylate and a photoinitiator. The mechanical properties of the hybrid materials were tested. The results showed that the mechanical properties and the adhesion of the hybrid material improved with increasing nano-sol content. When the content of nano-sol was 20% , the pencil hardness of the film reached 3 H, and when the content of the nano-sol was 10% , the adhesion of the film reached the highest level of 0. The nano-particles were well dispersed in the organic phase.%以γ-甲基丙烯酰氧丙基三甲氧基硅烷为原料,采用溶胶-凝胶法合成了可紫外光固化的纳米溶胶,采用红外光谱( FT-IR)、核磁共振(NMR)和透射电镜(SEM)对其结构、粒径大小和分布进行了分析表征.采用聚酯多元醇、甲苯二异氰酸酯( TDI)、丙烯酸羟乙酯(HEA)为原料,合成了聚氨酯丙烯酸酯.利用合成的可紫外光固化的纳米溶胶和聚氨酯丙烯酸酯制备了紫外光固化有机/无机纳米杂化材料,对纳米杂化材料的力学性能进行了测试.实验结果表明,随着纳米溶胶含量的增加,杂化材料的力学性能、附着力等均得到了提高,当纳米溶胶质量分数达到20%时,涂膜硬度可增至3H,纳米溶胶质量分数为10%时涂膜的附着力即可达到最高的0级;纳米粒子在有机相中分散良好.

  15. Graphene-carbon nanotube hybrid materials and use as electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Tour, James M.; Zhu, Yu; Li, Lei; Yan, Zheng; Lin, Jian

    2016-09-27

    Provided are methods of making graphene-carbon nanotube hybrid materials. Such methods generally include: (1) associating a graphene film with a substrate; (2) applying a catalyst and a carbon source to the graphene film; and (3) growing carbon nanotubes on the graphene film. The grown carbon nanotubes become covalently linked to the graphene film through carbon-carbon bonds that are located at one or more junctions between the carbon nanotubes and the graphene film. In addition, the grown carbon nanotubes are in ohmic contact with the graphene film through the carbon-carbon bonds at the one or more junctions. The one or more junctions may include seven-membered carbon rings. Also provided are the formed graphene-carbon nanotube hybrid materials.

  16. Evaluation of hybrid composite materials in cylindrical specimen geometries

    Science.gov (United States)

    Liber, T.; Daniel, I. M.

    1976-01-01

    Static and fatigue properties of three composite materials and hybrids were examined. The materials investigated were graphite/epoxy, S-glass/epoxy, PRD-49 (Kevlar 49)/epoxy, and hybrids in angle-ply configurations. A new type of edgeless cylindrical specimen was developed. It is a flattened tube with two flat sides connected by curved sections and it is handled much like the standard flat coupon. Special specimen fabrication, tabbing, and tab region reinforcing techniques were developed. Axial modulus, Poisson's ratio, strength, and ultimate strain were obtained under static loading from flattened tube specimens of nine laminate configurations. In the case of graphite/epoxy the tubular specimens appeared to yield somewhat higher strength and ultimate strain values than flat specimens. Tensile fatigue tests were conducted with all nine types of specimens and S-N curves obtained. Specimens surviving 10 million cycles of tensile loading were subsequently tested statically to failure to determine residual properties.

  17. Graphene-carbon nanotube hybrid materials and use as electrodes

    Science.gov (United States)

    Tour, James M.; Zhu, Yu; Li, Lei; Yan, Zheng; Lin, Jian

    2016-09-27

    Provided are methods of making graphene-carbon nanotube hybrid materials. Such methods generally include: (1) associating a graphene film with a substrate; (2) applying a catalyst and a carbon source to the graphene film; and (3) growing carbon nanotubes on the graphene film. The grown carbon nanotubes become covalently linked to the graphene film through carbon-carbon bonds that are located at one or more junctions between the carbon nanotubes and the graphene film. In addition, the grown carbon nanotubes are in ohmic contact with the graphene film through the carbon-carbon bonds at the one or more junctions. The one or more junctions may include seven-membered carbon rings. Also provided are the formed graphene-carbon nanotube hybrid materials.

  18. New preparation of fish material for interlaboratory study on PFCs

    NARCIS (Netherlands)

    Korytar, P.; Lohman, M.; Kwadijk, C.J.A.F.; Barneveld, van E.

    2007-01-01

    The Institute for Environmental Studies, Vrije Universiteit (IVM) has requested Wageningen IMARES to prepare a new fish material for use in the interlaboratory performance study on analysis of perfluorinated compounds (PFCs) due to the low amount of contaminants in the previously prepared material.

  19. Organic-inorganic hybrid materials processing and applications

    OpenAIRE

    Schmidt, Helmut K.; Mennig, Martin; Nonninger, Ralph; Oliveira, Peter William de; Schirra, Hermann

    1999-01-01

    Hybrid materials as inorganic-organic nanostructured composites require tailored surface chemistry in order to obtain a homogeneous distribution of the nanoparticles in the matrix. For this reason, nanoparticles with organic functions have been synthesized, first, to provide the desired æ-potential at a given pH value, second, to avoid irreversible agglomeration due to the spacing effect, and third, to provide the appropriate surface chemistry. I could be shown that using this approach, it is...

  20. Hybrid material as contrast agent in magnetic resonance images

    OpenAIRE

    Botella Asunción, Pablo; Cabrera García, Alejandro

    2015-01-01

    [EN] The invention relates to a contrast agent of magnetic resonance based on a hybrid material formed by an organo-metallic core derived from Prussian blue and a silica cover, and optionally, molecules of a poly(ethylene glycol), a fluorescent agent, a radio nucleus and/or a substance that directs to specific receptors, cells or tissues, joined by covalent bonding to the surface of the inorganic cover.

  1. Hybrid material as contrast agent in magnetic resonance images

    OpenAIRE

    Botella Asunción, Pablo; Cabrera García, Alejandro

    2015-01-01

    [EN] The invention relates to a contrast agent of magnetic resonance based on a hybrid material formed by an organo-metallic core derived from Prussian blue and a silica cover, and optionally, molecules of a poly(ethylene glycol), a fluorescent agent, a radio nucleus and/or a substance that directs to specific receptors, cells or tissues, joined by covalent bonding to the surface of the inorganic cover.

  2. Reinforced Pericardium as a Hybrid Material for Cardiovascular Applications

    OpenAIRE

    Bracaglia, Laura G.; Yu, Li; Hibino, Narutoshi; Fisher, John P.

    2014-01-01

    Pericardium-based cardiovascular devices are currently bound by a 10-year maximum lifetime due to detrimental calcification and degradation. The goal of this work is to develop a novel synthetic material to create a lasting replacement for malfunctioning or diseased tissue in the cardiovascular system. This study couples poly(propylene fumarate) (PPF) and a natural biomaterial together in an unprecedented hybrid composite and evaluates the composite versus the standard glutaraldehyde-treated ...

  3. Strongly coupled inorganic/nanocarbon hybrid materials for advanced electrocatalysis.

    Science.gov (United States)

    Liang, Yongye; Li, Yanguang; Wang, Hailiang; Dai, Hongjie

    2013-02-13

    Electrochemical systems, such as fuel cell and water splitting devices, represent some of the most efficient and environmentally friendly technologies for energy conversion and storage. Electrocatalysts play key roles in the chemical processes but often limit the performance of the entire systems due to insufficient activity, lifetime, or high cost. It has been a long-standing challenge to develop efficient and durable electrocatalysts at low cost. In this Perspective, we present our recent efforts in developing strongly coupled inorganic/nanocarbon hybrid materials to improve the electrocatalytic activities and stability of inorganic metal oxides, hydroxides, sulfides, and metal-nitrogen complexes. The hybrid materials are synthesized by direct nucleation, growth, and anchoring of inorganic nanomaterials on the functional groups of oxidized nanocarbon substrates including graphene and carbon nanotubes. This approach affords strong chemical attachment and electrical coupling between the electrocatalytic nanoparticles and nanocarbon, leading to nonprecious metal-based electrocatalysts with improved activity and durability for the oxygen reduction reaction for fuel cells and chlor-alkali catalysis, oxygen evolution reaction, and hydrogen evolution reaction. X-ray absorption near-edge structure and scanning transmission electron microscopy are employed to characterize the hybrids materials and reveal the coupling effects between inorganic nanomaterials and nanocarbon substrates. Z-contrast imaging and electron energy loss spectroscopy at single atom level are performed to investigate the nature of catalytic sites on ultrathin graphene sheets. Nanocarbon-based hybrid materials may present new opportunities for the development of electrocatalysts meeting the requirements of activity, durability, and cost for large-scale electrochemical applications.

  4. Preparation of LiMn2O4 Graphene Hybrid Nanostructure by Combustion Synthesis and Their Electrochemical Properties

    Directory of Open Access Journals (Sweden)

    Dinesh Rangappa

    2014-10-01

    Full Text Available The LiMn2O4 graphene hybrid cathode material has been synthesized by spray drying combustion process. The spinel structure cubic phase LiMn2O4 graphene hybrid material was prepared by spray drying process at 120 ℃ and subsequent heat treatment at 700 ℃ for 1 hour. The result indicates that the spinel shaped LiMn2O4 particles wrapped with graphene sheets were formed with particle size in the range of 60-70 nm. The charge-discharge measurement indicates that the LiMn2O4 graphene hybrid material shows an improved discharge capacity of 139 mAh/g at 0.1C rate. The pristine LiMn2O4 nano crystals present only about 132 mAh/g discharge capacity. The LiMn2O4 graphene hybrid samples show good cyclic performance with only 13% of capacity fading in 30 cycles when compared to the pristine LiMn2O4 that shows 22% of capacity fading in 30 cycles. The capacity retention of the LiMn2O4 graphene hybrid samples is about 10% higher than the pristine cycle after 30 cycles.

  5. Novel hybrid sol-gel materials for smart sensor windows

    Science.gov (United States)

    Wencel, Dorota; Higgins, Clare; Guckian, Adrian; McDonagh, Colette; MacCraith, Brian D.

    2005-06-01

    Current sensor trends, such as multianalyte capability, miniaturisation and patternability are important drivers for materials requirements in optical chemical sensors. In particular, issues such as enhanced sensitivity and printablity are key in developing optimised sensor materials for smart windows for bioprocessing applications. This study focuses on combining novel sol-gel-based hybrid matrices with engineered luminescent complexes to produce stable luminescence-based optical sensors with enhanced sensitivity for a range of analytes including oxygen, pH and carbon dioxide. As well as optimising sensor performance, issues such as surface modification of the plastic substrate and compatibility with different deposition techniques were addressed. Hybrid sol-gel matrices were developed using a range of precursors including tetraethoxysilane (TEOS), methyltriethoxysilane (MTEOS), ethyltriethoxysilane (ETEOS), n-propyltriethoxysilane (PTEOS), phenyltriethoxysilane (PhTEOS), and n-octyltriethoxysilane (C8TEOS). Oxygen sensing, based on luminescence quenching of ruthenium phenanthroline complexes, has been realised with each of these hybrid materials. Furthermore, the possibility of immobilising pH-indicators for pH and carbon dioxide sensing has been investigated with some success. In the context of in-situ monitoring of bioprocesses, issues such as humidity interference as well as the chemical robustness of the multianalyte platform, were addressed.

  6. Preparing Students for Success in Hybrid Learning Environments with Academic Resource Centers

    Science.gov (United States)

    Newman, Daniel; Dickinson, Michael

    2017-01-01

    This chapter describes institutional and andragogical best practices for preparing students to succeed in hybrid courses through the programming of academic resource centers, offers information on how to create peer support systems for students, and outlines some of the common pitfalls for students encountering a hybrid course for the first time.

  7. Organic/hybrid nanoparticles and single-walled carbon nanotubes: preparation methods and chiral applications.

    Science.gov (United States)

    Alhassen, Haysem; Antony, Vijy; Ghanem, Ashraf; Yajadda, Mir Massoud Aghili; Han, Zhao Jun; Ostrikov, Kostya Ken

    2014-11-01

    Nanoparticles are molecular-sized solids with at least one dimension measuring between 1-100 nm or 10-1000 nm depending on the individual discipline's perspective. They are aggregates of anywhere from a few hundreds to tens of thousands of atoms which render them larger than molecules but smaller than bulk solids. Consequently, they frequently exhibit physical and chemical properties somewhere between. On the other hand, nanocrystals are a special class of nanoparticles which have started gaining attention recently owing to their unique crystalline structures which provide a larger surface area and promising applications including chiral separations. Hybrid nanoparticles are supported by the growing interest of chemists, physicists, and biologists, who are researching to fully exploit them. These materials can be defined as molecular or nano-composites with mixed (organic or bio) and inorganic components, where at least one of the component domain has a dimension ranging from a few Å to several nanometers. Similarly, and due to their extraordinary physical, chemical, and electrical properties, single-walled carbon nanotubes have been the subject of intense research. In this short review, the focus is mainly on the current well-established simple preparation techniques of chiral organic and hybrid nanoparticles as well as single-walled carbon nanotubes and their applications in separation science. Of particular interest, cinchonidine, chitosan, and β-CD-modified gold nanoparticles (GNPs) are discussed as model examples for organic and hybrid nanoparticles. Likewise, the chemical vapor deposition method, used in the preparation of single-walled carbon nanotubes, is discussed. The enantioseparation applications of these model nanomaterials is also presented.

  8. Preparation and Crystallization Behaviors of Reactable Nano-SiO2/Polycaprolactone Hybrid Materials%可反应性纳米SiO2/聚己内酯杂化材料的制备和结晶性能研究

    Institute of Scientific and Technical Information of China (English)

    常海波; 马聪鹤; 李小红; 张普玉; 张治军

    2011-01-01

    Nano-SiO2/polycaprolactone hybrid materials were prepared with caprolactone and readable nano-SiO2 by in-situ polymerization. The interface structure formed in composite system and the crystallization behaviors of the hybrid material were investigated by means of fourier transformation infrared spectrometry ( FTIR ), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results indicate that the epoxy on the surface of nano-SiO2 was consumed during the polymerization process of PCL. The strong interfacial interaction between PCL and nano-SiO2 is created. Moreover, nano-SiO2 accelerates the crystallization of PCL and increases the crystallinity of PCL.%以己内酯和可反应性纳米二氧化硅为原料,在辛酸亚锡的催化作用下,原位制备了纳米SiO2/聚己内酯(PCL)杂化材料,利用红外光谱、热重分析仪和差示扫描量热仪对杂化材料的界面结构和结晶性能进行了研究.结果表明,纳米SiO2上的环氧基团在聚合过程中参与了反应,使纳米SiO2与PCL之间产生了强烈的界面作用,而且纳米SiO2的引入促进了PCL的结晶,增加了其结晶度.

  9. Reinforced pericardium as a hybrid material for cardiovascular applications.

    Science.gov (United States)

    Bracaglia, Laura G; Yu, Li; Hibino, Narutoshi; Fisher, John P

    2014-11-01

    Pericardium-based cardiovascular devices are currently bound by a 10-year maximum lifetime due to detrimental calcification and degradation. The goal of this work is to develop a novel synthetic material to create a lasting replacement for malfunctioning or diseased tissue in the cardiovascular system. This study couples poly(propylene fumarate) (PPF) and a natural biomaterial together in an unprecedented hybrid composite and evaluates the composite versus the standard glutaraldehyde-treated tissue. The polymer reinforcement is hypothesized to provide initial physical protection from proteolytic enzymes and degradation, but leave the original collagen and elastin matrix unaltered. The calcification rate and durability of the hybrid material are evaluated in vitro and in an in vivo subdermal animal model. Results demonstrate that PPF is an effective support and leads to significantly less calcium deposition, important metrics when evaluating cardiovascular material. By avoiding chemical crosslinking of the tissue and associated side effects, PPF-reinforced pericardium as a biohybrid material offers a promising potential direction for further development in cardiovascular material alternatives. Eliminating the basis for the majority of cardiovascular prosthetic failures could revolutionize expectations for extent of cardiovascular repair.

  10. PF/CLAY hybrid materials: a simple method to modulate the optical properties

    Directory of Open Access Journals (Sweden)

    Marcio Chao Chen Em

    2016-02-01

    Full Text Available Abstract The aim of this work was modulate the emission properties and improve thermal stability of a conjugated polymer incorporated into an inorganic matrix. Hybrid material was prepared based on poly(9,9-dioctylfluorene-co-phenylene (PF and montmorillonite (Na+Mt clay using wet impregnation of 10, 30 and 50 wt.% of PF into Na+Mt and Na+Mt intercalated with ammonium quaternary salts (hexadecyltrimethylammonium — HDTMA in a different proportions (OMt-1 and OMt-2. The materials were characterized by infrared and UV-Vis spectroscopy, fluorescence, X-ray diffratometry and thermogravimetry analysis. The results show that the presence of the clay alters the photoluminescent and thermal properties. Nevertheless, the degree of the clay organophilization and the clay content influences the luminescent properties due to the diverse interaction behavior between the polymer and clay. The sodium clay acted only as dispersing agent since no intercalation process occurs and the emission displacement is assigned to this behavior. In this case the PF emission displace from 402 to 395 nm. A nonlinear displacement is observed for PF/OMt-2 due the difficulties to conclude if the intercalation of the polymer occurs (379, 403 and 412 for hybrid with 10, 30 and 50%, respectively. For PF/OMt-1 a higher displacements for lower wavelength is observed due to intercalation of polymer chains and subsequent isolation in the interlamellar space, especially with material with 10 and 30% of PF in the hybrid material, whose displacement reached to 360 nm. All these results show that is possible to try to control the emission of the conjugated hybrid material changing the rate of the material.

  11. Sol-gel-derived hybrid materials multi-doped with rare-earth metal ions

    Science.gov (United States)

    Zelazowska, E.; Rysiakiewicz-Pasek, E.; Borczuch-Laczka, M.; Cholewa-Kowalska, K.

    2012-06-01

    Four different hybrid organic-inorganic materials based on TiO2-SiO2 matrices with organic additives and doped with rare-earth metal ions (III) from the group of europium, cerium, terbium, neodymium, dysprosium and samarium, were synthesized by sol-gel method. Tetraethyl orthosilicate, titanium (IV) isopropoxide and organic compounds, such as butyl acrylate, butyl methacrylate, ethyl acetoacetate, ethylene glycol dimethacrylate, ethyl acetate, propylene carbonate, organic solvents and certain inorganic salts were used in the synthesis. The inorganic part of the sols, which were used in the synthesis of all the hybrid materials, was prepared separately and then the organic parts were added. The materials obtained were aged for three weeks at room temperature and then heated in an electric oven for three hours at temperatures of 80 °C-150 °C. Scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM/EDX); X-ray diffraction (XRD); Fourier transform infrared spectroscopy (KBr technique); 29Si magic-angle spinning nuclear magnetic resonance; and fluorescence spectroscopy were used for the examination of morphology, microstructure and luminescence properties, respectively. Photoluminescence properties with relatively intense narrow emission lines of Tb, Eu, Dy, Nd, Sm respectively to the RE-ions doping, were observed for all the hybrid materials.

  12. Preparation of starchy material for alcoholic fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Ustinnikov, B.A.; Yarovenko, V.L.; Maksimova, E.A.

    1968-05-07

    The method involves grinding of the starchy material, heat treatment, exposure of the treated mass to a given temperature, cooling, and saccharification. To reduce losses of fermentable substances, simplify the process, and increase the yield of alcohol., a culture of Bacillus diastaticus is introduced into the ground material prior to heat treatment. The latter is conducted in 2 stages: (1) dissolution and dextrinization of starch at 75 to 95/sup 0/ and (2) sterilization at 125 to 35/sup 0/. Saccharification of the treated material is carried out at 35 to 45/sup 0/.

  13. Preparation of starchy material for alcoholic fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Ustinnikov, B.A.; Yarovenko, V.L.; Maksimova, E.A.

    1968-05-07

    The method involves grinding of the starchy material, heat treatment, exposure of the treated mass to a given temperature, cooling, and saccharification. To reduce losses of fermentable substances, simplify the process, and increase the yield of alcohol, a culture of Bacillus diastaticus is introduced into the ground material prior to heat treatment. The latter is conducted in 2 stages: (1) dissolution and dextrinization of starch at 75 to 95 degrees and (2) sterilization at 125 to 35 degrees. Saccharification of the treated material is carried out at 35 to 45 degrees.

  14. Immobilization of carbon nanotubes on functionalized graphene film grown by chemical vapor deposition and characterization of the hybrid material

    Directory of Open Access Journals (Sweden)

    Prashanta Dhoj Adhikari

    2014-01-01

    Full Text Available We report the surface functionalization of graphene films grown by chemical vapor deposition and fabrication of a hybrid material combining multi-walled carbon nanotubes and graphene (CNT–G. Amine-terminated self-assembled monolayers were prepared on graphene by the UV-modification of oxidized groups introduced onto the film surface. Amine-termination led to effective interaction with functionalized CNTs to assemble a CNT–G hybrid through covalent bonding. Characterization clearly showed no defects of the graphene film after the immobilization reaction with CNT. In addition, the hybrid graphene material revealed a distinctive CNT–G structure and p–n type electrical properties. The introduction of functional groups on the graphene film surface and fabrication of CNT–G hybrids with the present technique could provide an efficient, novel route to device fabrication.

  15. Preparation and characterization of functional silica hybrid magnetic nanoparticles

    Science.gov (United States)

    Digigow, Reinaldo G.; Dechézelles, Jean-François; Dietsch, Hervé; Geissbühler, Isabelle; Vanhecke, Dimitri; Geers, Christoph; Hirt, Ann M.; Rothen-Rutishauser, Barbara; Petri-Fink, Alke

    2014-08-01

    We report on the synthesis and characterization of functional silica hybrid magnetic nanoparticles (SHMNPs). The co-condensation of 3-aminopropyltriethoxysilane (APTES) and tetraethyl orthosilicate (TEOS) in presence of superparamagnetic iron oxide nanoparticles (SPIONs) leads to hybrid magnetic silica particles that are surface-functionalized with primary amino groups. In this work, a comprehensive synthetic study is carried out and completed by a detailed characterization of hybrid particles' size and morphology, surface properties, and magnetic responses using different techniques. Depending on the mass ratio of SPIONs and the two silanes (TEOS and APTES), we were able to adjust the number of surface amino groups and tune the magnetic properties of the superparamagnetic hybrid particles.

  16. Core-shell structured polystyrene/BaTiO3 hybrid nanodielectrics prepared by in situ RAFT polymerization: a route to high dielectric constant and low loss materials with weak frequency dependence.

    Science.gov (United States)

    Yang, Ke; Huang, Xingyi; Xie, Liyuan; Wu, Chao; Jiang, Pingkai; Tanaka, Toshikatsu

    2012-11-23

    A novel route to prepare core-shell structured nanocomposites with excellent dielectric performance is reported. This approach involves the grafting of polystyrene (PS) from the surface of BaTiO(3) by an in situ RAFT polymerization. The core-shell structured PS/BaTiO(3) nanocomposites not only show significantly increased dielectric constant and very low dielectric loss, but also have a weak frequency dependence of dielectric properties over a wide range of frequencies. In addition, the dielectric constant of the nanocomposites can also be easily tuned by varying the thickness of the PS shell. Our method is very promising for preparing high-performance nanocomposites used in energy-storage devices.

  17. Preparation and characterization of perfluorosulfonic resin/titania hybrid transparent films

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Preparation and characterization of perfluorosulfonic resin/titania organic-inorganic hybrid films were presented. The transparent hybrid films were prepared by hydrothermal treatment at low temperature of a mixed solution of tetrabutyl titanate and perfluorosulfonic resin with the help of acetylacetone. The characterization was carried out by SEM,XRD,FT-IR,UV-Vis and TGA. The results showed that the perfluorosulfonic resin/titania hybrid transparent films were composed of titania particles dispersed in the perfluorosulfonic resin matrix very well and the titania was of anatase phase. Its diameter de-creased with increasing weight ratio of titania to perfluorosulfonic resin.

  18. Preparation and characterization of perfluorosulfonic resin/titania hybrid transparent films

    Institute of Scientific and Technical Information of China (English)

    LI JianMei; XUE MinZhao; ZHANG YongMing; LIU YanGang

    2007-01-01

    Preparation and characterization of perfluoroaulfonic resin/titaniaorganic-inorganic hybrid films were presented. The transparent hybrid films were prepared by hydrothermal treatment at low temperature of a mixed solution of tetrabutyl titanata and perfluorosulfonic resin with the help of acetylacetone. The charactarization was carried out by SEM, XRD, FT-IR, UV-Vis and TGA. The results showed that the perfiuorosulfonic resin/titania hybrid transparent films were composed of titania particles dispersed in the perfluorosulfonic resin matrix very well and the titania was of anatase phase. Its diameter decreased with increasing weight ratio of titania to perfluorosulfonic resin.

  19. Hybrid fiber reinforcement and crack formation in Cementitious Composite Materials

    DEFF Research Database (Denmark)

    Pereira, E.B.; Fischer, Gregor; Barros, J.A.O.

    2011-01-01

    reinforcement systems. The research described in this paper shows that the multi-scale conception of cracking and the use of hybrid fiber reinforcements do not necessarily result in an improved tensile behavior of the composite. Particular material design requirements may nevertheless justify the use of hybrid......The use of different types of fibers simultaneously for reinforcing cementitious matrices is motivated by the concept of a multi-scale nature of the crack propagation process. Fibers with different geometrical and mechanical properties are used to bridge cracks of different sizes from the micro......- to the macroscale. In this study, the performance of different fiber reinforced cementitious composites is assessed in terms of their tensile stress-crack opening behavior. The results obtained from this investigation allow a direct quantitative comparison of the behavior obtained from the different fiber...

  20. Preparation of a Hybrid Zirconium Phytate and Its Application for the Removal of Fluorine in Metal-Precoating Effluent

    Directory of Open Access Journals (Sweden)

    Cheng Wenkai

    2016-01-01

    Full Text Available A hybrid zirconium phytate (ZrxIP6 with porous surface was synthesized via the direct precipitation method. The as-prepared ZrxIP6 was characterized by SEM, EDS, FT-IR. The sample obtained from P/Zr = 3:1(mol/mol indicated that a hybrid material might be formed through coordination of the zirconium ions with the –COPO3 groups in phytic acid molecules. An attempt to employ the hybrid ZrxIP6 as a sorbent in the removal of fluoride ions in metal-precoating wastewater was performed. The adsorption capacity qe and the residual F- ions concentration Ce using the ZrxIP6 (P/Zr = 3:1 as an adsorbent, were 1.21 mg.g-1 and 1.47 mg.L-1, respectively.

  1. Hydrothermal Treatment of Tannin: A Route to Porous Metal Oxides and Metal/Carbon Hybrid Materials

    Directory of Open Access Journals (Sweden)

    Flavia L. Braghiroli

    2017-01-01

    Full Text Available In the present paper, porous materials were prepared from the hydrothermal treatment of aqueous solutions of tannin, a renewable phenolic resource extracted from tree barks, containing dissolved salts of transition metals: V, Cr, Ni and Fe. Hydrothermal treatment produced carbonaceous particles doped with the aforementioned metals, and such materials were treated according to two different routes: (i calcination in air in order to burn the carbon and to recover porous oxides; (ii pyrolysis in inert atmosphere so as to recover porous metal/carbon hybrid materials. The nature of the metal salt was found to have a dramatic impact on the structure of the materials recovered by the first route, leading either to nano-powders (V, Cr or to hollow microspheres (Ni, Fe. The second route was only investigated with iron, leading to magnetic Fe-loaded micro/mesoporous carbons whose texture, pore volumes and surface areas gradually changed with the iron content.

  2. Novel Fabrication and Simple Hybridization of Exotic Material MEMS

    Energy Technology Data Exchange (ETDEWEB)

    Datskos, P.G.; Rajic, S.

    1999-11-13

    Work in materials other than silicon for MEMS applications has typically been restricted to metals and metal oxides instead of more ''exotic'' semiconductors. However, group III-V and II-VI semiconductors form a very important and versatile collection of material and electronic parameters available to the MEMS and MOEMS designer. With these materials, not only are the traditional mechanical material variables (thermal conductivity, thermal expansion, Young's modulus, etc.) available, but also chemical constituents can be varied in ternary and quaternary materials. This flexibility can be extremely important for both friction and chemical compatibility issues for MEMS. In addition, the ability to continually vary the bandgap energy can be particularly useful for many electronics and infrared detection applications. However, there are two major obstacles associated with alternate semiconductor material MEMS. The first issue is the actual fabrication of non-silicon devices and the second impediment is communicating with these novel devices. We will describe an essentially material independent fabrication method that is amenable to most group III-V and II-VI semiconductors. This technique uses a combination of non-traditional direct write precision fabrication processes such as diamond turning, ion milling, laser ablation, etc. This type of deterministic fabrication approach lends itself to an almost trivial assembly process. We will also describe in detail the mechanical, electrical, and optical self-aligning hybridization technique used for these alternate-material MEMS.

  3. Mechanochemistry in the preparation of advanced materials

    Directory of Open Access Journals (Sweden)

    Erika Godočíková

    2006-06-01

    Full Text Available Mechanochemistry is a branch of solid state chemistry which inquires into processes which proceed in solids due to the application of mechanical energy. At present, mechanochemistry appears to be a science with a sound theoretical foundation which exhibits a wide range of potential application. Amongst the potential viable processes we can mention the modification of properties of building materials, the new method of fertilizer production, the activity enhancement and regeneration of catalysts, the new method of modification of solubility and bioavailability of drugs in pharmacy, the control of reaction kinetics in the chemical technology and last but not least the recent achievements in the synthesis of advanced materials. In this review paper, the definition of mechanochemistry and its history is given with the types of mills applied. Theoretical background for enhanced reactivity is given, several characterization methods and two examples of application in materials science and pharmacy are described.

  4. Bioactivity and degradability of hybrids nano-composites materials with great application as bone tissue substitutes

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez-Téllez, D.A.; Téllez-Jurado, L.; Chávez-Alcalá, J.F., E-mail: fchaveza@hotmail.com

    2014-12-05

    Highlights: • pH has an effect on the degradation process of the hybrid materials. • Weight loss depends on the change of pH during the degradation process. • Bioactivity in the materials is strongly related to calcium and pH. - Abstract: In this work, hybrids with great application as bioactive materials having different compositions based on siloxane network were prepared. In vitro bioactivity and in vitro degradability tests were carried out in the materials by soaking them into simulated body fluid (SBF) and into phosphate buffer solution (PBS) to prove their apatite-forming ability and to show their degradation process, respectively. In both in vitro tests, measurements of pH and loss weight were made to observe bioactivity and degradation processes. To prove growth of HA, the materials were characterized through X-ray diffraction, infrared spectroscopy, and scanning electron microscopy. The results showed that some samples have better bioactivity than others. It was found that the incorporation of CaO component into the network of the materials results in an increase of the apatite-forming ability in SBF. Moreover, during the degradation tests, all the samples presented weight loss, especially the ones that contain CaO.

  5. Preparation of Nickel Materials with Fractal Structure

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A way of manufacturing nickel material with fractal structure has been studied. Some algae with natural fractalstructure were used as the basic substrates. The nickel was coated on the substrates by both electroless depositionand electrodeposition. After elimination of the foundational algae by erosion, dissolution etc, the pure nickel materialswith fractal structure were obtained. At last, the specific surface area was analyzed by BET analyses and the fractaldimension of the nickel material was calculated by means of box-counting technique. The comparison of fractaldimension between Ni structure and natural algae was also given.

  6. Supramolecular Chemistry: New chemodosimeters and hybrid materials for the chromo-fluorogenic detection of anions and neutral molecules

    OpenAIRE

    2016-01-01

    [EN] Abstract The present PhD thesis entitled "Supramolecular Chemistry: New chemodosimeters and hybrid materials for the chromo-fluorogenic detection of anions and neutral molecules" is based on the application of supramolecular chemistry and material science principles for the development of optical chemosensors for anions and neutral molecules detection. The second chapter of this PhD thesis is devoted to the preparation of chemodosimeters for the chromo-fluorogenic detection of f...

  7. Functional-template directed self-assembly (FTDSA) of mesostructured organic-inorganic hybrid materials

    Institute of Scientific and Technical Information of China (English)

    LI LeLe; SUN LingDong; ZHANG YaWen; YAN ChunHua

    2009-01-01

    Since the discovery of a surfactant directed self-assembly approach for the fabrication of mesoporous silica in 1992,increasing attention has been focused on the design and synthesis of mesostructured functional materials.Organic functionalization is becoming a major topic in this research field,since highly ordered mesostructured organic-inorganic hybrids offer novel functionalities and enhanced performance over their individual components.We begin with a brief overview of the three fundamental methods (post-synthetic grafting technique,co-condensation method,and preparation of periodic mesoporous organosilicas) for the preparation of organically functionalized mesostructured silica,and focus on one of the most promising approaches,which herein was named as functional-template directed self-assembly (FTDSA) approach,and in the eyes of the authors it has a special position in the preparation of this class of hybrid materials.A comprehensive overview of the state of research in the area of FTDSA and its potential applications will be given.

  8. Donor-acceptor graphene-based hybrid materials facilitating photo-induced electron-transfer reactions.

    Science.gov (United States)

    Stergiou, Anastasios; Pagona, Georgia; Tagmatarchis, Nikos

    2014-01-01

    Graphene research and in particular the topic of chemical functionalization of graphene has exploded in the last decade. The main aim is to increase the solubility and thereby enhance the processability of the material, which is otherwise insoluble and inapplicable for technological applications when stacked in the form of graphite. To this end, initially, graphite was oxidized under harsh conditions to yield exfoliated graphene oxide sheets that are soluble in aqueous media and amenable to chemical modifications due to the presence of carboxylic acid groups at the edges of the lattice. However, it was obvious that the high-defect framework of graphene oxide cannot be readily utilized in applications that are governed by charge-transfer processes, for example, in solar cells. Alternatively, exfoliated graphene has been applied toward the realization of some donor-acceptor hybrid materials with photo- and/or electro-active components. The main body of research regarding obtaining donor-acceptor hybrid materials based on graphene to facilitate charge-transfer phenomena, which is reviewed here, concerns the incorporation of porphyrins and phthalocyanines onto graphene sheets. Through illustrative schemes, the preparation and most importantly the photophysical properties of such graphene-based ensembles will be described. Important parameters, such as the generation of the charge-separated state upon photoexcitation of the organic electron donor, the lifetimes of the charge-separation and charge-recombination as well as the incident-photon-to-current efficiency value for some donor-acceptor graphene-based hybrids, will be discussed.

  9. Functionalised hybrid materials of conducting polymers with individual wool fibers.

    Science.gov (United States)

    Kelly, Fern M; Johnston, James H; Borrmann, Thomas; Richardson, Michael J

    2008-04-01

    Composites of natural protein materials, such as merino wool, with the conducting polymers polypyrrole (PPy) and polyaniline (PAn) have been successfully synthesised. In doing so, hybrid materials have been produced in which the mechanical strength and flexibility of the fibers is retained whilst also incorporating the desired chemical and electrical properties of the polymer. Scanning electron microscopy shows PPy coatings to comprise individual polymer spheres, approximately 100 to 150 nm in diameter. The average size of the polymer spheres of PAn was observed to be approximately 50 to 100 nm in diameter. These spheres fuse together in a continuous sheet to coat the fibers in their entirety. The reduction of silver ions to silver metal nanoparticles onto the redox active polymer surface has also been successful and thus imparts anti-microbial properties to the hybrid materials. This gives rise to further applications requiring the inhibition of microbial growth. The chemical and physical characterisation of such products has been undertaken through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), electrical conductivity, cyclic voltammetry, X-ray photoelectron spectroscopy (XPS) and the testing of their anti-microbial activity.

  10. Environmentally compatible solder materials for thick film hybrid assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Hosking, F.M.; Vianco, P.T.; Rejent, J.A.; Hernandez, C.L. [Sandia National Labs., Albuquerque, NM (United States). Materials and Process Sciences Center

    1997-02-01

    New soldering materials and processes have been developed over the last several years to address a variety of environmental issues. One of the primary efforts by the electronics industry has involved the development of alternative solders to replace the traditional lead-containing alloys. Sandia National Laboratories is developing such alternative solder materials for printed circuit board and hybrid microcircuit (HMC) applications. This paper describes the work associated with low residue, lead-free soldering of thick film HMC`s. The response of the different materials to wetting, aging, and mechanical test conditions was investigated. Hybrid test vehicles were designed and fabricated with a variety of chip capacitors and leadless ceramic chip carriers to conduct thermal, electrical continuity, and mechanical evaluations of prototype joints. Microstructural development along the solder and thick film interface, after isothermal solid state aging over a range of elevated temperatures and times, was quantified using microanalytical techniques. Flux residues on soldered samples were stressed (temperature-humidity aged) to identify potential corrosion problems. Mechanical tests also supported the development of a solder joint lifetime prediction model. Progress of this effort is summarized.

  11. Synthesis and Charaterization of Silica-Based Aldehyde Chitosan Hybrid Material for Biodiesel Purification.

    Science.gov (United States)

    da Silva, Sandra Rodrigues; de Albuquerque, Nilson J A; de Almeida, Rusiene M; de Abreu, Fabiane C

    2017-09-25

    This study concerns the development and charaterization of Silica-based aldehyde Chitosan hybrid material as an adsorbent for biodiesel purification. This biocomposite was prepared by sol-gel route and oxidation with periodate, and then characterized. FTIR experiments showed that the hybrid formed presents absorption bands similar to those of Chitosan-Silica, with the exception of the vibrations at 1480 cm(-1) and 1570 cm(-1) attributed to the symmetrical angular deformation in the N-H plane, and possess large N₂ Brunauer-Emmett-Teller (BET) surface areas. Thermogravimetric analysis (TG) and scanning electron microscopy (SEM) was also carried out. Adsorption studies of bioadsorbents involving the analysis of free glycerol, soap, acidity, diglycerides, triglycerides, and fluorescence spectroscopy showed that silica-based aldehyde chitosan has a good affinity for glycerol and a good purification process.

  12. Synthesis and Charaterization of Silica-Based Aldehyde Chitosan Hybrid Material for Biodiesel Purification

    Directory of Open Access Journals (Sweden)

    Sandra Rodrigues da Silva

    2017-09-01

    Full Text Available This study concerns the development and charaterization of Silica-based aldehyde Chitosan hybrid material as an adsorbent for biodiesel purification. This biocomposite was prepared by sol-gel route and oxidation with periodate, and then characterized. FTIR experiments showed that the hybrid formed presents absorption bands similar to those of Chitosan-Silica, with the exception of the vibrations at 1480 cm−1 and 1570 cm−1 attributed to the symmetrical angular deformation in the N-H plane, and possess large N2 Brunauer–Emmett–Teller (BET surface areas. Thermogravimetric analysis (TG and scanning electron microscopy (SEM was also carried out. Adsorption studies of bioadsorbents involving the analysis of free glycerol, soap, acidity, diglycerides, triglycerides, and fluorescence spectroscopy showed that silica-based aldehyde chitosan has a good affinity for glycerol and a good purification process.

  13. Preparation of low-cost waterproofing materials

    Institute of Scientific and Technical Information of China (English)

    Al-Hadidy AI; TAN Yi-qiu; DONG Ze-jiao; WANG Jia-ni

    2008-01-01

    To address the need for producing a cheap, single-component, hot-applied compound joint sealant with high quality for sealing joints and cracks in concrete and flexible pavements without using primer for instal-lation, a hot-applied modified asphalt sealant was produced by blending up about 30% starch into 20% citric acid. The starch and the asphalt cement were mixed at a temperature of above 160 ℃. Thus the waterproofing asphalt was manufactured to protect the surface of various shapes and types from water leakage using the citric acid. Results indicate that this sealant complies with the requirements of ASTM D-1191, D-6690-O6a and D-7116-05. The citric acid is a kind of reliable materials for asphalt cement, which can be widely used in paving and waterproofing construction materials, and this offers profound engineering and economic advantages.

  14. Interfacially synthesized PAni–PMo12 hybrid material for supercapacitor applications

    Indian Academy of Sciences (India)

    Arumugam Manivel; Abdullah M Asiri; Khalid Ahmad Alamry; Teresa Lana-Villarreal; Sambandam Anandan

    2014-06-01

    The concept of interfacial polymerization is utilized for the synthesis of polyaniline–phosphomolybdate (PAni–PMo12) molecular hybrids and it is well characterized. The electrical conductivity of the synthesized hybrid materials increases with increase in PMo12 wt%. The synthesized hybrid materials are evaluated as the active electrode materials for supercapacitor application. Cyclic voltammetric studies of the hybrid-modified electrode shows broad parallelogram-shaped peak as an evidence for pseudo-capacitive behaviour. The galvanostatic charge–discharge studies enlighten that interfacially synthesized hybrid materials loaded with PMo12 show relatively enhanced specific capacitance values than PMo12 free samples.

  15. SEM evaluation of the hybrid layer after cavity preparation with Er:YAG laser.

    Science.gov (United States)

    de Barceleiro, Marcos Oliveira; Dias, Kátia Regina Hostílio Cervantes; Sales, Helena Xavier; Silva, Bárbara Carvalho; Barceleiro, Cristiane Gomes

    2008-01-01

    This study compared the thickness of the hybrid layer formed using Scotchbond Multi-Purpose Plus, Single Bond 2, Prime & Bond 2.1 and Xeno III on a dentin surface prepared with a diamond bur in a high speed handpiece or prepared with an Er:YAG laser used with two parameters of pulse energy (200 and 400 mJ) and two parameters of frequency (4 and 6 Hz). Flat dentin surfaces obtained from 20 human third molars were treated with the two methods and were then prepared with the dentin adhesive systems according to the manufacturers' instructions. After a layer of composite was applied, the specimens were sectioned, flattened, polished and prepared for Scanning Electronic Microscopy observation. Five different measurements of the hybrid layer thickness were obtained along the bonded surface in each specimen. The results were statistically analyzed using Analysis of Variance and Student-Newman-Keuls tests (p cavity preparation method, four groups were formed: Group I (diamond bur) > Group II (Laser 200 mJ/4 Hz) = Group III (Laser 200 mJ/6 Hz) > Group IV (Laser 400 mJ/4 Hz) > Group V (Laser 400 mJ/6 Hz). When comparing the dentin adhesive systems, there were no statistically significant differences. These results showed that the four tested dentin adhesive systems produced a 2.90 +/- 1.71 microm hybrid layer in dentin prepared with a diamond bur. This hybrid layer was regular and routinely found. In the laser groups, the dentin adhesive systems produced hybrid layers ranging from 0.41 +/- 1.00 microm to 2.06 +/- 2.49 microm, which were very irregular and not routinely found. It was also concluded that the Er:YAG laser, with the parameters used in this experiment, has a negative influence on the formation of a hybrid layer and cavity preparation methods influence formation of the hybrid layer.

  16. Thermo-analysis of Preparation Process for Electron Trapping Materials

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The heated process of raw materials for electron trapping materials (ETM) is investigated by thermo-analysis method. The temperature ranges of raw materials experienced some physical and chemical change processes, such as dehydration, organic solvent removal, crystal sulphur burning, oxidation of alkaline earth sulfides and solid phase reaction (rare earth doped) and so on, are obtained. The experimental results also show that the presence of trace oxygen in shielded gas is very harmful to prepare the ETM.The raw material thermo-analysis results provide very important experimental reference for optimizing the ETM preparation techniques.

  17. Lanthano phosphomolybdate-decorated silica nanoparticles: novel hybrid materials with photochromic properties.

    Science.gov (United States)

    Pinto, Tânia V; Fernandes, Diana M; Pereira, Clara; Guedes, Alexandra; Blanco, Ginesa; Pintado, Jose M; Pereira, Manuel F R; Freire, Cristina

    2015-03-14

    Novel photochromic hybrid nanomaterials were prepared through the immobilization of the lacunary Keggin-type phosphomolybdate (TBA4H3[PMo11O39]·xH2O, denoted as PMo11) and sandwich-type lanthano phosphomolybdates (K11[Ln(III)(PMo11O39)2]·xH2O, denoted as Ln(PMo11)2, where Ln(III) = Sm, Eu, Gd, Tb and Dy) onto positively-charged functionalized silica nanoparticles. The functionalized silica nanoparticles were prepared by a one-step co-condensation route between tetraethyl orthosilicate and dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride, presenting an average particle size of 95 ± 26 nm, a spherical morphology and a pore diameter of 13.7 nm. All characterization techniques proved the successful immobilization of the phosphomolybdates. The photochromic properties of the resulting hybrid nanomaterials in the solid state were evaluated by UV-Vis spectroscopy and colorimetry. All materials revealed promising photochromic properties under UV irradiation (λ = 254 nm). The lacunary phosphomolybdate anchored onto the silica nanoparticles, C18-SiO2@PMo11, showed the best photoswitching properties, with the color changing from green to dark-blue (ΔE* = 26.8). Among the Ln(PMo11)2-based hybrid nanomaterials, those containing higher Mo loadings--Eu(III)- and Tb(III)-based samples--presented more significant color changes from green to dark-blue (ΔE* = 18.8-18.9). These results revealed that the optical properties of the as-prepared hybrid nanomaterials did not depend directly on the type of Ln(III) cation, but only on the amount of Mo, which was the target element responsible for the photochromic behavior.

  18. Design of Digital Control System for Cement Raw Material Preparation

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ying; LI Hongsheng

    2006-01-01

    This paper describes the design of cement raw material prepared digital control system by PROFIBUS. It uses the digital technology to implement the digital control system for raw material prepared of the cement factory. This system improves the communication between the industrial system and locale instrument devices. It applies digital communication to replace the 4-20 mA or 24VDC signal between locale lever device and controller.

  19. Antithrombotic Protein Filter Composed of Hybrid Tissue-Fabric Material has a Long Lifetime.

    Science.gov (United States)

    Inoue, Yusuke; Yokota, Tomoyuki; Sekitani, Tsuyoshi; Kaneko, Akiko; Woo, Taeseong; Kobayashi, Shingo; Shibuya, Tomokazu; Tanaka, Masaru; Kosukegawa, Hiroyuki; Saito, Itsuro; Isoyama, Takashi; Abe, Yusuke; Yambe, Tomoyuki; Someya, Takao; Sekino, Masaki

    2017-05-01

    There are recent reports of hybrid tissue-fabric materials with good performance-high biocompatibility and high mechanical strength. In this study, we demonstrate the capability of a hybrid material as a long-term filter for blood proteins. Polyester fabrics were implanted into rats to fabricate hybrid tissue-fabric material sheets. The hybrid materials comprised biological tissue grown on the fabric. The materials were extracted from the rat's body, approximately 100 days post-implantation. The tissues were decellularized to prevent immunological rejection. An antithrombogenicity test was performed by dropping blood onto the hybrid material surface. The hybrid material showed lesser blood coagulation than polysulfone and cellulose. Blood plasma was filtered using the hybrid material to evaluate the protein removal percentage and the lifetime of the hybrid material in vitro. The hybrid material showed a comparable performance to conventional filters for protein removal. Moreover, the hybrid material could work as a protein filter for 1 month, which is six times the lifetime of polysulfone.

  20. 46 CFR 160.077-13 - Materials-Type I and Commercial Hybrid PFD.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Materials-Type I and Commercial Hybrid PFD. 160.077-13... Flotation Devices § 160.077-13 Materials—Type I and Commercial Hybrid PFD. (a) General. All commercial... material on each reversible side, if any. The material must be Type I material that is approved...

  1. Hybrid Materials Based on Magnetic Layered Double Hydroxides: A Molecular Perspective.

    Science.gov (United States)

    Abellán, Gonzalo; Martí-Gastaldo, Carlos; Ribera, Antonio; Coronado, Eugenio

    2015-06-16

    Design of functional hybrids lies at the very core of synthetic chemistry as it has enabled the development of an unlimited number of solids displaying unprecedented or even improved properties built upon the association at the molecular level of quite disparate components by chemical design. Multifunctional hybrids are a particularly appealing case among hybrid organic/inorganic materials. Here, chemical knowledge is used to deploy molecular components bearing different functionalities within a single solid so that these properties can coexist or event interact leading to unprecedented phenomena. From a molecular perspective, this can be done either by controlled assembly of organic/inorganic molecular tectons into an extended architecture of hybrid nature or by intercalation of organic moieties within the empty channels or interlamellar space offered by inorganic solids with three-dimensional (MOFs, zeolites, and mesoporous hosts) or layered structures (phosphates, silicates, metal dichalcogenides, or anionic clays). This Account specifically illustrates the use of layered double hydroxides (LDHs) in the preparation of magnetic hybrids, in line with the development of soft inorganic chemistry processes (also called "Chimie Douce"), which has significantly contributed to boost the preparation hybrid materials based on solid-state hosts and subsequent development of applications. Several features sustain the importance of LDHs in this context. Their magnetism can be manipulated at a molecular level by adequate choice of constituting metals and interlayer separation for tuning the nature and extent of magnetic interactions across and between planes. They display unparalleled versatility in accommodating a broad range of anionic species in their interlamellar space that encompasses not only simple anions but chemical systems of increasing dimensionality and functionalities. Their swelling characteristics allow for their exfoliation in organic solvents with high

  2. Encapsulated Vanadium-Based Hybrids in Amorphous N-Doped Carbon Matrix as Anode Materials for Lithium-Ion Batteries.

    Science.gov (United States)

    Long, Bei; Balogun, Muhammad-Sadeeq; Luo, Lei; Luo, Yang; Qiu, Weitao; Song, Shuqin; Zhang, Lei; Tong, Yexiang

    2017-09-12

    Recently, researchers have made significant advancement in employing transition metal compound hybrids as anode material for lithium-ion batteries and developing simple preparation of these hybrids. To this end, this study reports a facile and scalable method for fabricating a vanadium oxide-nitride composite encapsulated in amorphous carbon matrix by simply mixing ammonium metavanadate and melamine as anode materials for lithium-ion batteries. By tuning the annealing temperature of the mixture, different hybrids of vanadium oxide-nitride compounds are synthesized. The electrode material prepared at 700 °C, i.e., VM-700, exhibits excellent cyclic stability retaining 92% of its reversible capacity after 200 cycles at a current density of 0.5 A g(-1) and attractive rate performance (220 mAh g(-1) ) under the current density of up to 2 A g(-1) . The outstanding electrochemical properties can be attributed to the synergistic effect from heterojunction form by the vanadium compound hybrids, the improved ability of the excellent conductive carbon for electron transfer, and restraining the expansion and aggregation of vanadium oxide-nitride in cycling. These interesting findings will provide a reference for the preparation of transition metal oxide and nitride composites as well. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Evaluation of mechanical properties of natural hybrid fibers, reinforced polyester composite materials

    Directory of Open Access Journals (Sweden)

    S. Kasiviswanathan

    2015-12-01

    Full Text Available The composite materials are replacing the traditional materials, because of its superior properties such as high tensile strength, low thermal expansion, high strength to weight ratio. The developments of new materials are on the anvil and are growing day by day. In this work the effect of glass fibre hybridization with the randomly oriented natural fibers has been evaluated. The sisal (S, banana (B, E-glass synthetic fibers were chopped and reinforced with polyester matrix. Six layers were prepared in the following stacking sequence of S/B/G, S/G/B, G/S/B, G/S/B/G/S/B/G, S/G/B//S/G/B, B/G/S/B/G/S. The mechanical properties like impact strength, flexural strength and tensile strength were investigated and compared. It was observed that the addition of two and three layer of glass fiber can improve the mechanical properties like tensile, Flexural and impact strength.

  4. Aptamer-based organic-silica hybrid affinity monolith prepared via "thiol-ene" click reaction for extraction of thrombin.

    Science.gov (United States)

    Wang, Zheng; Zhao, Jin-cheng; Lian, Hong-zhen; Chen, Hong-yuan

    2015-06-01

    A novel strategy for preparing aptamer-based organic-silica hybrid monolithic column was developed via "thiol-ene" click chemistry. Due to the large specific surface area of the hybrid matrix and the simplicity, rapidness and high efficiency of "thiol-ene" click reaction, the average coverage density of aptamer on the organic-silica hybrid monolith reached 420 pmol μL(-1). Human α-thrombin can be captured on the prepared affinity monolithic column with high specificity and eluted by NaClO4 solution. N-p-tosyl-Gly-Pro-Arg p-nitroanilide acetate was used as the sensitive chromogenic substrate of thrombin. The thrombin enriched by this affinity column was detected with a detection of limit of 0.01 μM by spectrophotometry. Furthermore, the extraction recovery of thrombin at 0.15 μM in human serum was 91.8% with a relative standard deviation of 4.0%. These results indicated that "thiol-ene" click chemistry provided a promising technique to immobilize aptamer on organic-inorganic hybrid monolith and the easily-assembled affinity monolithic material could be used to realize highly selective recognition of trace proteins.

  5. Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes.

    KAUST Repository

    Xu, Jixian

    2015-05-08

    Solution-processed planar perovskite devices are highly desirable in a wide variety of optoelectronic applications; however, they are prone to hysteresis and current instabilities. Here we report the first perovskite-PCBM hybrid solid with significantly reduced hysteresis and recombination loss achieved in a single step. This new material displays an efficient electrically coupled microstructure: PCBM is homogeneously distributed throughout the film at perovskite grain boundaries. The PCBM passivates the key PbI3(-) antisite defects during the perovskite self-assembly, as revealed by theory and experiment. Photoluminescence transient spectroscopy proves that the PCBM phase promotes electron extraction. We showcase this mixed material in planar solar cells that feature low hysteresis and enhanced photovoltage. Using conductive AFM studies, we reveal the memristive properties of perovskite films. We close by positing that PCBM, by tying up both halide-rich antisites and unincorporated halides, reduces electric field-induced anion migration that may give rise to hysteresis and unstable diode behaviour.

  6. ELABORATION AND CHARACTERIZATION OF HYBRID MATERIALS ORGANIC / INORGANIC

    Directory of Open Access Journals (Sweden)

    O BOUBEKKA

    2010-12-01

    Full Text Available Hybrid materials "organic-inorganic" are the subject of immense interest, allowing both to combine some properties of an inorganic material and a polymer. In this work we have carried out a study on conductive polymers, in general, emphasizing the polyaniline. On the other hand, we have presented the inorganic compounds (NbSe2, and ternary compound Nn3Sn SnNb5Se9. From the chemical method, we had to synthesize the following mixtures: PANI/NbSe2, PANI /, Nn3Sn PANI / SnNb5Se9. The structural study of these new compounds are produced by X-ray diffraction and infrared. The morphology of the resulting mixtures to be studied by scanning electron microscopy.

  7. Hybrid materials and polymer electrolytes for electrochromic device applications.

    Science.gov (United States)

    Thakur, Vijay Kumar; Ding, Guoqiang; Ma, Jan; Lee, Pooi See; Lu, Xuehong

    2012-08-08

    Electrochromic (EC) materials and polymer electrolytes are the most imperative and active components in an electrochromic device (ECD). EC materials are able to reversibly change their light absorption properties in a certain wavelength range via redox reactions stimulated by low direct current (dc) potentials of the order of a fraction of volts to a few volts. The redox switching may result in a change in color of the EC materials owing to the generation of new or changes in absorption band in visible region, infrared or even microwave region. In ECDs the electrochromic layers need to be incorporated with supportive components such as electrical contacts and ion conducting electrolytes. The electrolytes play an indispensable role as the prime ionic conduction medium between the electrodes of the EC materials. The expected applications of the electrochromism in numerous fields such as reflective-type display and smart windows/mirrors make these materials of prime importance. In this article we have reviewed several examples from our research work as well as from other researchers' work, describing the recent advancements on the materials that exhibit visible electrochromism and polymer electrolytes for electrochromic devices. The first part of the review is centered on nanostructured inorganic and conjugated polymer-based organic-inorganic hybrid EC materials. The emphasis has been to correlate the structures, morphologies and interfacial interactions of the EC materials to their electronic and ionic properties that influence the EC properties with unique advantages. The second part illustrates the perspectives of polymer electrolytes in electrochromic applications with emphasis on poly (ethylene oxide) (PEO), poly (methyl methacrylate) (PMMA) and polyvinylidene difluoride (PVDF) based polymer electrolytes. The requirements and approaches to optimize the formulation of electrolytes for feasible electrochromic devices have been delineated. Copyright © 2012 WILEY

  8. Preparation and Characterization of Organic-Inorganic Hybrid Hydrogel Electrolyte Using Alkaline Solution

    Directory of Open Access Journals (Sweden)

    Masanobu Chiku

    2011-09-01

    Full Text Available Organic-inorganic hybrid hydrogel electrolytes were prepared by mixing hydrotalcite, cross-linked potassium poly(acrylate and 6 M KOH solution. The organic-inorganic hybrid hydrogel electrolytes had high ionic conductivity (0.456–0.540 S cm−1 at 30 °C. Moreover, the mechanical strength of the hydrogel electrolytes was high enough to form a 2–3 mm thick freestanding membrane because of the reinforcement with hydrotalcite.

  9. Preparation and properties of a POSS-containing organic-inorganic hybrid crosslinked polymer

    Institute of Scientific and Technical Information of China (English)

    Wang Yan Nie; Gang Li; Yang Li; Hong Yao Xu

    2009-01-01

    A novel POSS-containing organic-inorganic hybrid crosslinked polymer was prepared by hydrosilylation reaction of octahydridosilsesquioxane (T8H8) with 4,4'-bis(4-allyloxybenzoyloxy)phenyl (diene A). Its structure and property was character-ized by FTIR, 29Si NMR, TGA and ellipsometer, respectively. The results show that the hybrid polymer possesses high thermal stability and low dielectric constant of 1.97 at optical frequencies.

  10. Preparation and characterization of UV-cured hybrid polyvinyl alcohol nanofiber membranes by electrospinning

    OpenAIRE

    2014-01-01

    The present study investigated the possibility of preparing polyvinyl alcoholic (PVA) organic-inorganic hybrid nanofiber membranes by electrospinning with UV irradiation. To this end, PVA, PVA/SiO2 organic-inorganic hybrid obtained with Geniosil® XL 33 as a SiO2 source, and imidazole-functionalized mesoporous PVA/SiO2/N=N nanofiber membranes were synthesized. These membranes were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric-differen...

  11. Influence of Material Distribution on Impact Resistance of Hybrid Composites

    Science.gov (United States)

    Abatan, Ayu; Hu, Hurang

    1998-01-01

    Impact events occur in a wide variety of circumstances. A typical example is a bullet impacting a target made of composite material. These impact events produce time-varying loads on a structure that can result in damage. As a first step to understanding the damage resistance issue in composite laminates, an accurate prediction of the transient response during an impact event is necessary. The analysis of dynamic loadings on laminated composite plates has undergone considerable development recently. Rayleigh-Ritz energy method was used to determine the impact response of laminated plates. The impact response of composite plates using shear deformation plate theory was analyzed. In recent work a closed-form solution was obtained for a rectangular plate with four edges simply supported subjected to a center impact load using classical plate theory. The problem was further investigated and the analysis results compared of both classical plate theory and shear deformation theory, and found that classical plate theory predicts very accurate results for the range of small deformations considered. In this study, the influence of cross sectional material distribution on the comparative impact responses of hybrid metal laminates subjected to low and medium velocity impacts is investigated. A simple linear model to evaluate the magnitude of the impact load is proposed first, and it establishes a relation between the impact velocity and the impact force. Then a closed-form solution for impact problem is presented. The results were compared with the finite element analysis results. For an 11 layer-hybrid laminate, the impact response as a function of material distribution in cross-section is presented. With equal areal weight, the effect of the number of laminate layers on the impact resistance is also investigated. Finally, the significance of the presented results is discussed.

  12. THE SYNERGISTIC EFFECT OF HYBRID FLAME RETARDANTS ON PYROLYSIS BEHAVIOUR OF HYBRID COMPOSITE MATERIALS

    Directory of Open Access Journals (Sweden)

    M. T. ALBDIRY

    2012-06-01

    Full Text Available The aim of this investigation is to comprehensively understand the polymeric composite behavior under direct fire sources. The synergistic effects of hybrid flame retardant material on inhabiting the pyrolysis of hybrid reinforced fibers, woven roving (0°- 45° carbon and kevlar (50/50 wt/wt, and an araldite resin composites were studied. The composites were synthesised and coated primarily by zinc borate (2ZnO.3B2O3.3.5H2O and modified by antimony trioxide (Sb2O3 with different amounts (10-30 wt% of flame retardant materials. In the experiments, the composite samples were exposed to a direct flame source generated by oxyacetylene flame (~3000ºC at variable exposure distances of 10-20 mm. The synergic flame retardants role of antimony trioxide and zinc borate on the composite surface noticeably improves the flame resistance of the composite which is attributed to forming a protective mass and heat barrier on the composite surface and increasing the melt viscosity.

  13. Organic-inorganic hybrid polyionic liquid based polyoxometalate as nano porous material for selective oxidation of sulfides

    Science.gov (United States)

    Rafiee, Ezzat; Shahebrahimi, Shabnam

    2017-07-01

    Organic-inorganic hybrid nano porous materials based on poly(ionic liquid)-polyoxometalate (PIL-POM) were reported. These hybrid materials were synthesized by the reaction of 4-vinyl pyridine with 1,3-propanesultone, followed by the polymerization and also sulfonate-functionalized cross-linked poly(4-vinylpyridine) and combining these polymers with H5PMo10V2O40 (PMo10V2). Activity of prepared PIL-PMo10V2 hybrids were investigated as catalysts for oxidation of sulfides with H2O2 as oxidant. For understanding catalytic activities of the PIL-PMo10V2 hybrids in oxidation of sulfides, effect of catalyst composition, substrate, and reaction conditions were studied. The results show that the PIL-PMo10V2 hybrids are active as selective heterogeneous catalysts for oxidation of sulfides and can be recovered and reused. The catalyst was characterized by FT-IR, TGA-DSC, XRD, SEM/EDX, BET, CV and zeta potential measurement. Also, average molecular weight of prepared catalysts were measured.

  14. Inexpensive sol-gel synthesis of multiwalled carbon nanotube-TiO2 hybrids for high performance antibacterial materials.

    Science.gov (United States)

    Abbas, Nadir; Shao, Godlisten N; Haider, M Salman; Imran, Syed Muhammad; Park, Sung Soo; Jeon, Sun-Jeong; Kim, Hee Taik

    2016-11-01

    This study reports an inexpensive sol-gel method to synthesize TiO2-CNT hybrid materials. Synthesized TiO2-CNT materials show strong antibacterial activity in the absence of light. Cheap TiO2 source TiOCl2 is used during synthesis in the absence of high temperatures, high pressures and organic solvents. TiO2-CNT materials with 0, 2, 5, 10, 15 and 20wt% of CNT were synthesized and compared for antibacterial activity, surface area, porosity, crystalline structure, chemical state, and HaCaT cell proliferation. The antibacterial strength of hybrid materials increased significantly with the increase in CNT loading amount, and the TiO2-CNT samples with a CNT loading of 10wt% or more nearly removed all of the E.coli bacteria. HaCaT cell proliferation studies of synthesized hybrid materials illustrated that prepared TiO2-CNT systems exhibit minimum cytotoxicity. The characteristics of prepared materials were analyzed by means of XRD, FTIR, Raman spectroscopy, XPS, TEM, and nitrogen gas physisorption studies, compared and discussed. Copyright © 2016. Published by Elsevier B.V.

  15. Biomineralization-inspired synthesis of functional organic/inorganic hybrid materials: organic molecular control of self-organization of hybrids.

    Science.gov (United States)

    Arakaki, Atsushi; Shimizu, Katsuhiko; Oda, Mayumi; Sakamoto, Takeshi; Nishimura, Tatsuya; Kato, Takashi

    2015-01-28

    Organisms produce various organic/inorganic hybrid materials, which are called biominerals. They form through the self-organization of organic molecules and inorganic elements under ambient conditions. Biominerals often have highly organized and hierarchical structures from nanometer to macroscopic length scales, resulting in their remarkable physical and chemical properties that cannot be obtained by simple accumulation of their organic and inorganic constituents. These observations motivate us to create novel functional materials exhibiting properties superior to conventional materials--both synthetic and natural. Herein, we introduce recent progress in understanding biomineralization processes at the molecular level and the development of organic/inorganic hybrid materials by these processes. We specifically outline fundamental molecular studies on silica, iron oxide, and calcium carbonate biomineralization and describe material synthesis based on these mechanisms. These approaches allow us to design a variety of advanced hybrid materials with desired morphologies, sizes, compositions, and structures through environmentally friendly synthetic routes using functions of organic molecules.

  16. Biologic effect of a hybrid preparation of human chorionic gonadotropin in human subjects.

    Science.gov (United States)

    Rosemberg, E

    1982-01-01

    Alpha and beta-hCG subunits were recombined generating a hybrid hCG preparation (AB1ER-CR-2XY) which met the required specifications of a pharmaceutical product. The biologic activity contained in each vial of AB1ER-CR-2XY was equivalent to 10 000IU of hCG-IS. This preparation was given as a single dose of 10 000IU by the i.m. route to four female subjects presenting unexplained infertility. The hCG hybrid was demonstrated to effect gonadal stimulation in humans.

  17. Preparation and evaluation of biocomposites as wound dressing material.

    Science.gov (United States)

    Ramnath, V; Sekar, S; Sankar, S; Sankaranarayanan, C; Sastry, T P

    2012-12-01

    Collagen was isolated from the chrome containing leather waste (CCLW) which is a major solid waste in leather industry. Composite films were made using sago starch (SG), soya protein (SY), and collagen (C) and were cross linked with glutaraldehyde (G).The films prepared were characterized for their physico chemical properties like tensile strength, infrared spectra, thermogravimetric analysis, surface morphology, and water absorption studies. Better mechanical properties and surface morphology were observed for SG-SY-G-C films compared to other films prepared using collagen. The composite films prepared were used as wound dressing material on the experimental wounds of rats and healing pattern was evaluated using planimetric, biochemical, and histopathological studies. These studies have revealed better wound healing capacity of SG-SY-G-C film and utilization of CCLW in the preparation of value added product like wound dressing material.

  18. Preparation of zeolite-A/chitosan hybrid composites and their bioactivities and antimicrobial activities

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Liang; Gong, Jie [State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009 (China); Zeng, Changfeng [College of Mechanic and Power Engineering, Nanjing University of Technology, Nanjing 210009 (China); Zhang, Lixiong, E-mail: lixiongzhang@yahoo.com [State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009 (China)

    2013-10-15

    Zeolite-A/chitosan hybrid composites with zeolite contents of 20–55 wt.% were prepared by in situ transformation of silica/chitosan mixtures in a sodium aluminate alkaline solution through impregnation–gelation–hydrothermal synthesis. The products were characterized by X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, scanning electron microscopy, thermogravimetric analysis, and mercury penetration porosimetry. Their in vitro bioactivities were examined using as-synthesized and Ca{sup 2+}-exchanged hybrid composites in simulated body fluid (SBF) for hydroxyapatite (HAP) growth. Their antimicrobial activities for Escherichia coli (E. coli) in trypticase soy broth (TSB) were evaluated using Ag{sup +}-exchanged hybrid composites. The zeolite-A/chitosan hybrid composites could be prepared as various shapes, including cylinders, plates and thin films. They possessed macropores with pore sizes ranging from 100 to 300 μm and showed compressive mechanical strength as high as 3.2 MPa when the zeolite content was 35 wt.%. Fast growth on the Ca{sup 2+}-exchanged hybrid composites was observed with the highest weight gain of 51.4% in 30 days. The 35 wt.% Ag{sup +}-exchanged hybrid composite showed the highest antimicrobial activity, which could reduce the 9 × 10{sup 6} CFU mL{sup −1}E. coli concentration to zero within 4 h of incubation time with the Ag{sup +}-exchanged hybrid composite amount of 0.4 g L{sup −1}. The bioactivity and antimicrobial activity could be combined by ion-exchanging the composites first with Ca{sup 2+} and then with Ag{sup +}. These zeolite-A/chitosan hybrid composites have potential applications on tissue engineering and antimicrobial food packaging. - Graphical abstract: Zeolite A/chitosan hybrid composites were prepared by in situ transformation of precursors in the chitosan matrix, which possess macroporous structures and exhibit superior bioactivity and antimicrobial activity and potential biomedical

  19. Structure of Solvent-Free Nanoparticle−Organic Hybrid Materials

    KAUST Repository

    Yu, Hsiu-Yu

    2010-11-16

    We derive the radial distribution function and the static structure factor for the particles in model nanoparticleorganic hybrid materials composed of nanoparticles and attached oligomeric chains in the absence of an intervening solvent. The assumption that the oligomers form an incompressible fluid of bead-chains attached to the particles that is at equilibrium for a given particle configuration allows us to apply a density functional theory for determining the equilibrium configuration of oligomers as well as the distribution function of the particles. A quasi-analytic solution is facilitated by a regular perturbation analysis valid when the oligomer radius of gyration R g is much greater than the particle radius a. The results show that the constraint that each particle carries its own share of the fluid attached to itself yields a static structure factor that approaches zero as the wavenumber approaches zero. This result indicates that each particle excludes exactly one other particle from its neighborhood. © 2010 American Chemical Society.

  20. Hybrid Quantum-Classical Approach to Correlated Materials

    Science.gov (United States)

    Bauer, Bela; Wecker, Dave; Millis, Andrew J.; Hastings, Matthew B.; Troyer, Matthias

    2016-07-01

    Recent improvements in the control of quantum systems make it seem feasible to finally build a quantum computer within a decade. While it has been shown that such a quantum computer can in principle solve certain small electronic structure problems and idealized model Hamiltonians, the highly relevant problem of directly solving a complex correlated material appears to require a prohibitive amount of resources. Here, we show that by using a hybrid quantum-classical algorithm that incorporates the power of a small quantum computer into a framework of classical embedding algorithms, the electronic structure of complex correlated materials can be efficiently tackled using a quantum computer. In our approach, the quantum computer solves a small effective quantum impurity problem that is self-consistently determined via a feedback loop between the quantum and classical computation. Use of a quantum computer enables much larger and more accurate simulations than with any known classical algorithm, and will allow many open questions in quantum materials to be resolved once a small quantum computer with around 100 logical qubits becomes available.

  1. Designing dye-nanochannel antenna hybrid materials for light harvesting, transport and trapping.

    Science.gov (United States)

    Calzaferri, Gion; Méallet-Renault, Rachel; Brühwiler, Dominik; Pansu, Robert; Dolamic, Igor; Dienel, Thomas; Adler, Pauline; Li, Huanrong; Kunzmann, Andreas

    2011-02-25

    We discuss artificial photonic antenna systems that are built by incorporating chromophores into one-dimensional nanochannel materials and by organizing the latter in specific ways. Zeolite L (ZL) is an excellent host for the supramolecular organization of different kinds of molecules and complexes. The range of possibilities for filling its one-dimensional channels with suitable guests has been shown to be much larger than one might expect. Geometrical constraints imposed by the host structure lead to supramolecular organization of the guests in the channels. The arrangement of dyes inside the ZL channels is what we call the first stage of organization. It allows light harvesting within the volume of a dye-loaded ZL crystal and also the radiationless transport of energy to either the channel ends or center. One-dimensional FRET transport can be realized in these guest-host materials. The second stage of organization is realized by coupling either an external acceptor or donor stopcock fluorophore at the ends of the ZL channels, which can then trap or inject electronic excitation energy. The third stage of organization is obtained by interfacing the material to an external device via a stopcock intermediate. A possibility to achieve higher levels of organization is by controlled assembly of the host into ordered structures and preparation of monodirectional materials. The usually strong light scattering of ZL can be suppressed by refractive-index matching and avoidance of microphase separation in hybrid polymer/dye-ZL materials. The concepts are illustrated and discussed in detail on a bidirectional dye antenna system. Experimental results of two materials with a donor-to-acceptor ratio of 33:1 and 52:1, respectively, and a three-dye system illustrate the validity and challenges of this approach for synthesizing dye-nanochannel hybrid materials for light harvesting, transport, and trapping.

  2. Uso do processo sol-gel na obtenção de materiais híbridos organo-inorgânicos: preparação, caracterização e aplicação em eletrólitos de estado sólido Utilization of the sol-gel process to obtain organic-inorganic hybrid materials: preparation, characterization and application as solid state electrolytes

    Directory of Open Access Journals (Sweden)

    Rita A Zoppi

    1997-12-01

    Full Text Available Neste trabalho é descrita a preparação de materiais híbridos constituídos de um copolímero orgânico contendo segmentos óxido de etileno e de sílica. A rede inorgânica foi formada na solução polimérica a partir da hidrólise e condensação do tetraetoxisilano, TEOS. Como copolímero foi utilizado o poli(óxido de etileno-b-amida-6, PEBAX. Foram preparados também híbridos contendo perclorato de lítio, denominados aqui híbridos eletrólitos. Os materiais foram caracterizados por microscopia eletrônica de transmissão, ensaios de tensão-deformação, análise dinâmico-mecânica e difratometria de raios-X. Os sistemas PEBAX/TEOS/LiClO foram também caracterizados por espectroscopia de impedância eletroquímica e voltametria cíclica para avaliação de suas propriedades como eletrólito de estado sólido.In this work it was described the preparation of hybrid materials constituted by a organic copolymer, which contains ethylene oxide blocks, and silica. The inorganic network was formed by the hydrolysis and condensation of tetraethoxysilane, TEOS, into the polymeric solution. As a copolymer, it was used poly(ethylene oxide-b-amide-6, PEBAX. Hybrids containing lithium perchlorate, known as hybrid electrolytes, were also prepared. The materials were characterized by transmission electron microscopy, stress-strain tests, dynamic-mechanical analysis and X-ray diffractometry. The PEBAX/TEOS/LiClO4 systems were also characterized by electrochemical impedance spectroscopy and cyclic voltammetry to evaluate their properties as a solid state electrolyte.

  3. A new route for local probing of inner interactions within a layered double hydroxide/benzene derivative hybrid material.

    Science.gov (United States)

    Fleutot, S; Dupin, J C; Baraille, I; Forano, C; Renaudin, G; Leroux, F; Gonbeau, D; Martinez, H

    2009-05-14

    This paper presents the preparation and characterization of hybrid hydrotalcite-type layered double hydroxides (Zn1-xAlx(OH)2HBSx.nH2O, with x=0.33) where HBS is the 4-phenol sulfonate, with a detailed analysis of the grafting process of this organic entity onto the host lattice. As a set of the usual techniques (XRD, TG-DT/MS, FTIR and 27Al MAS NMR) was used to characterize the hybrid materials, this work focuses on a joint study by X-ray photoelectron spectroscopy and some quantum-calculation modeling in order to highlight the nature of the interactions between the organic and the mineral sub-systems. For the as-prepared hybrid material, the main results lead to a quasi-vertical orientation of the organic molecules within the mineral sheets via H-bond stabilization. By heating the hybrid material up to 200 degrees C, the structure shrinks with the condensation of the organics; the different theoretical modeling done gives an energy-stable situation when a direct attachment of the HBS sulfonate group sets up with the mineral layers, in agreement with the recorded XPS experimental data.

  4. Preparation of Nano/Micron Composite Materials by Process Method

    Institute of Scientific and Technical Information of China (English)

    GAN Ai-feng; WEI Qi; JI; Yuan; HU Chuan-xin; YAO Jun-min

    2004-01-01

    This thesis put forward a method that controls the process of synthesizing nanomaterial to realize the composite of nanomaterial and micronmaterial. This thesis realizes the composite of nanomaterial and micronmaterial by adding micronmaterial during production of nanomaterial through sol-gel method, also introduces the technique and experiment's process preparation of nanocomposite material, and successfully prepared nanocomposite materials with nano-PbTiO3 covered on the surface of micron-Ni. According to the sample's SEM-pictures, the core-shell can be observed plate microstructure, and it is uniform, tight, full and good.

  5. Apparatus for preparing cornea material for tabbed (sutureless) transplantation

    Science.gov (United States)

    Collins, J.P.

    1997-07-22

    A tool and a method for preparing a donor material used in sutureless corneal transplants uses a first cutting portion to prepare a donor blank having tabbed portions extending outwardly radially. A second cutting portion is used to cut the central portion of the blank. The tool is used as a guide member for the second cutting portion. In one embodiment the tool has slits laterally defined therethrough which allow the tabbed portions of the donor material to be thinned to a desired thickness using a scalpel. In an another embodiment the second cutting portion is a round trephine which is used to simultaneously trim each of the tabbed portions. 26 figs.

  6. Hybrid Aluminum Composite Materials Based on Carbon Nanostructures

    Directory of Open Access Journals (Sweden)

    Tatiana S. Koltsova

    2015-09-01

    Full Text Available We investigated formation of carbon nanofibers grown by chemical deposition (CVD method using an acetylene-hydrogen mixture on the surface of micron-sized aluminum powder particles. To obtain uniform distribution of the carbon nanostructures on the particles we deposited nickel catalyst on the surface by spraying from the aqueous solution of nickel nitrate. It was found that increasing the time of the synthesis lowers the rate of growth of carbon nanostructures due to the deactivation of the catalyst. The Raman spectroscopy measurements confirm the presence of disordered carbon corresponding to CNFs in the specimen. X-ray photoelectron spectroscopy showed the presence of aluminum carbide in the hot pressed samples. An aluminum composite material prepared using 1 wt.% CNFs obtained by uniaxial cold pressing and sintering showed 30% increase in the hardness compared to pure aluminum, whereas the composites prepared by hot pressing showed 80% increase in the hardness. Composite materials have satisfactory ductility. Thus, the aluminum based material reinforced with carbon nanostructures should be appropriate for creating high-strength and light compacts for aerospace and automotive applications and power engineering.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7355

  7. Facile preparation of hybrid core-shell nanorods for photothermal and radiation combined therapy

    Science.gov (United States)

    Deng, Yaoyao; Li, Erdong; Cheng, Xiaju; Zhu, Jing; Lu, Shuanglong; Ge, Cuicui; Gu, Hongwei; Pan, Yue

    2016-02-01

    The hybrid platinum@iron oxide core-shell nanorods with high biocompatibility were synthesized and applied for combined therapy. These hybrid nanorods exhibit a good photothermal effect on cancer cells upon irradiation with a NIR laser. Furthermore, due to the presence of a high atomic number element (platinum core), the hybrid nanorods show a synergistic effect between photothermal and radiation therapy. Therefore, the as-prepared core-shell nanorods could play an important role in facilitating synergistic therapy between photothermal and radiation therapy to achieve better therapeutic efficacy.The hybrid platinum@iron oxide core-shell nanorods with high biocompatibility were synthesized and applied for combined therapy. These hybrid nanorods exhibit a good photothermal effect on cancer cells upon irradiation with a NIR laser. Furthermore, due to the presence of a high atomic number element (platinum core), the hybrid nanorods show a synergistic effect between photothermal and radiation therapy. Therefore, the as-prepared core-shell nanorods could play an important role in facilitating synergistic therapy between photothermal and radiation therapy to achieve better therapeutic efficacy. Electronic supplementary information (ESI) available: Details of general experimental procedures. See DOI: 10.1039/c5nr09102k

  8. Antibacterial continuous nanofibrous hybrid yarn through in situ synthesis of silver nanoparticles: Preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Barani, Hossein, E-mail: barani@birjand.ac.ir

    2014-10-01

    Nanofibrous hybrid yarns of polyvinyl alcohol (PVA) and poly-L-lactide acid (PLLA) with the antibacterial activity were prepared that contains 0, 5, 10, 20, and 30 wt.% of silver nanoparticles according to the PVA polymer content. This was performed by electrospinning using distilled water and 2, 2, 2-trifluoroethanol as a solvent for PVA and PLLA respectively, and sodium borohydride was used as a reducing agent. The scanning electron microscope observation confirmed the formation of AgNPs into the PVA nanofiber structure, and they were uniform, bead free, cylindrical and smooth. The diameter of hybrid yarns and their nanofiber component was decreased as the silver nitrate concentration in electrospinning solutions was increased. The differential scanning calorimetry results indicated that the silver nanoparticles can form interactions with polymer chains and decrease the melting enthalpy. The mechanical analysis showed a lower stress and strain at break of the AgNP-loaded nanofibrous hybrid yarns than the unloaded hybrid yarn. However, there wasn't a statistically significant difference between the strain at break of electrospun nanofibrous hybrid yarns. Moreover, the bactericidal efficiency of all loaded samples was over 99.99%. - Highlights: • Nanofibrous hybrid yarns of PVA/PLLA with antibacterial activity were prepared. • The diameter of nanofibers was decreased as the AgNP concentration was increased. • AgNPs make interactions with amorphous phase of polymer and increase the Tg. • All loaded samples presented a good bactericidal and bacteriostatic efficiency.

  9. Preparation and antimicrobial ability of natural porous antibacterial materials

    Institute of Scientific and Technical Information of China (English)

    DONG Fa-qin; LI Guo-wu; SUN Zhi-gang; SHEN Gang; FENG Qi-ming; DAI Qun-wei

    2005-01-01

    The liquid ion exchange method, solid salt melt method and dry-wet circulation method were used to prepare natural porous antimicrobial materials with natural minerals, such as zeolite, spilite, palygorskite and montmorillonite, respectively. Atomic absorption spectrum and X-ray diffraction analysis were carried out to investigate the effects of Ag+, Cu2+ and Zn2+ on antimicrobial abilities of natural porous minerals, and the effect of preparation method on ion exchange capacity of antimicrobial material, respectively. The results show that for the ion exchange capacity, clay mineral is higher than fibrous mineral, i.e. both zeolite and montmorillonite are higher; the antimicrobial ability of material with Ag+ is the best; the exchange capacities of materials with Cu2+ or Zn2+ are all higher, but the antimicrobial ability of Cu2+ is better than that of Zn2+.

  10. Functional lignocellulosic materials prepared by ATRP from a wood scaffold

    Science.gov (United States)

    Cabane, Etienne; Keplinger, Tobias; Künniger, Tina; Merk, Vivian; Burgert, Ingo

    2016-01-01

    Wood, a natural and abundant source of organic polymers, has been used as a scaffold to develop novel wood-polymer hybrid materials. Through a two-step surface-initiated Atom Transfer Radical Polymerization (ATRP), the porous wood structure can be effectively modified with polymer chains of various nature. In the present study, polystyrene and poly(N-isopropylacrylamide) were used. As shown with various characterization techniques including confocal Raman microscopy, FTIR, and SEM/EDX, the native wood ultrastructure and features are retained and the polymer chains can be introduced deep within the wood, i.e. inside the wood cell walls. The physical properties of the new materials have been studied, and results indicate that the insertion of polymer chains inside the wood cell wall alters the intrinsic properties of wood to yield a hybrid composite material with new functionalities. This approach to the functionalization of wood could lead to the fabrication of a new class of interesting functional materials and promote innovative utilizations of the renewable resource wood. PMID:27506369

  11. Dopamine/TiO{sub 2} hybrid thin films prepared by the liquid phase deposition method

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez-Tauste, David [Departament de Quimica, Universitat Autonoma de Barcelona, Campus UAB, Edifici Cn, 08290 Cerdanyola del Valles, Barcelona (Spain)], E-mail: davidg@qf.uab.es; Domenech, Xavier [Departament de Quimica, Universitat Autonoma de Barcelona, Campus UAB, Edifici Cn, 08290 Cerdanyola del Valles, Barcelona (Spain); Domingo, Concepcion [Instituto de Ciencia de Materiales (CSIC), Campus UAB, 08290 Cerdanyola del Valles, Barcelona (Spain); Ayllon, Jose A. [Departament de Quimica, Universitat Autonoma de Barcelona, Campus UAB, Edifici Cn, 08290 Cerdanyola del Valles, Barcelona (Spain)

    2008-04-30

    Liquid phase deposition method is applied to one-step production of a hybrid material composed by dopamine(DA) and TiO{sub 2} anatase. An optimized amount of the enediol derivative is added to a fluoride titania precursor aqueous solution in order to entrap this modifier within the growing TiO{sub 2}, yielding a DA/TiO{sub 2} nanocomposite material. Uniform, well-adhered and brown-colored thin films are deposited on indium tin oxide covered glass substrate. The DA/TiO{sub 2} hybrid material has been characterized by infrared spectroscopy, electronic microscopy, X-ray diffraction and UV-vis spectroscopy. The formation of the hybrid material seems to be reasonably explained by linkage of different TiO{sub 2} nanocrystallites taking advantage of both enediol and amine groups of DA.

  12. Preparation of Magnesium Silicide from Recycled Materials for Energy Storage.

    OpenAIRE

    Bumba, Jakub

    2016-01-01

    Recycling technologies help to save energy, materials and environment. This is the main reason of their popularity. The recovery of semiconductors and metals depends on recycling treatment. A new multi-step technology, which enables to obtain pure silicon and hydrogen from waste materials,is reported in this study. The only by-product is magnesium phosphate, which is a desired fertilizer. Magnesium silicide was successfully prepared from milled silicon photovoltaic (PV) panels and mill...

  13. Preparation, characterisation, engine performance and emission characteristics of coconut oil based hybrid fuels

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Pranil J.; Singh, Anirudh [Division of Physics, School of Engineering and Physics, Faculty of Science, Technology and Environment, University of the South Pacific, 325 Fletcher Road, Suva (Fiji); Khurma, Jagjit [Division of Chemistry, School of Biological, Chemical and Environmental Sciences, Faculty of Science, Technology and Environment, University of the South Pacific, Suva (Fiji)

    2010-09-15

    In this study, hybrid fuels consisting of coconut oil, aqueous ethanol and a surfactant (butan-1-ol) were prepared and tested as a fuel in a direct injection diesel engine. After determining fuel properties such as the density, viscosity and gross calorific values of these fuels, they were used to run a diesel engine. The engine performance and exhaust emissions were investigated and compared with that of diesel. The experimental results show that the efficiency of the hybrid fuels is comparable to that of diesel. As the viscosity of the hybrid fuels decreased and approached that of diesel, the efficiency increased progressively towards that of diesel. The exhaust emissions were lower than those for diesel, except carbon monoxide emissions, which increased. Hence, it is concluded that these hybrid fuels can be used successfully as an alternative fuel in diesel engines without any modifications. Their completely renewable nature ensures that they are environmentally friendly with regard to their emissions characteristics. (author)

  14. Preparation of stable food-grade double emulsions with a hybrid premix membrane emulsification system

    NARCIS (Netherlands)

    Eisinaite, Viktorija; Juraite, Dovile; Schroën, Karin; Leskauskaite, Daiva

    2016-01-01

    In this study we demonstrate that food-grade double emulsions can be successfully prepared using a hybrid premix emulsification system. A coarse emulsion containing beetroot juice as inner water phase, sunflower oil as oil phase and 0.5% or 1.0% whey protein isolate solution as outer water phase

  15. Preparation and characterization of cellulose acetate organic/inorganic hybrid films

    Science.gov (United States)

    Saeed S. Shojaie; Timothy G. Rials; Stephen S. Kelley

    1995-01-01

    A series of organic/inorganic hybrid (OIH) films were prepared using cellulose acetate (CA) as the organic component and tetraethyl orthosilicate (TEOS) as the inorganic component. The chemical, morphological, and mechanical properties of these films were evaluated with a variety of analytical techniques. The results of these evaluations showed that crosslinked CA OIH...

  16. Preparation and Characterization of Hybrid Luminescence Mesoporous MCM-48 Doped with Eu( Ⅲ ) Complex

    Institute of Scientific and Technical Information of China (English)

    Meng Qingguo; Li Huanrong; Peng Chunyun; Zhang Hongjie; Boutinaud P; Franville A C; Mahiou R

    2004-01-01

    The preparation of hybrid mesoporous MCM-48 grafted by vinyl group via post-grafting process was reported and studied by X-ray diffraction, BET and 29Si solid MAS NMR.An organic β-diketonate Europium complex the corresponding luminescence property was characterized.

  17. Metal nanoparticle deposited inorganic nanostructure hybrids, uses thereof and processes for their preparation

    Science.gov (United States)

    Tenne, Reshef; Tsverin, Yulia; Burghaus, Uwe; Komarneni, Mallikharjuna Rao

    2016-01-26

    This invention relates to a hybrid component comprising at least one nanoparticle of inorganic layered compound (in the form of fullerene-like structure or nanotube), and at least one metal nanoparticle, uses thereof as a catalyst, (e.g. photocatalysis) and processes for its preparation.

  18. Investigation of Tribological Behavior of a Novel Hybrid Composite Prepared with Al-Coconut Shell Ash Mixed with Graphite

    Science.gov (United States)

    Siva Sankara Raju, R.; Panigrahi, M. K.; Ganguly, R. I.; Srinivasa Rao, G.

    2017-08-01

    The present investigation develops a next-generation hybrid Al metal matrix composite using coconut shell ash (CSA) and graphite (Gr) reinforcement. Stir-casting is adapted to prepare an Al-1100-based composite. Three other composites of Al-Al2O3, Al-Al2O3-Gr, and Al-CSA are prepared that contain equivalent volume fractions of Al2O3, CSA, and Gr. These assist in comparisons among the three composites and the developed hybrid Al-CSA-Gr composite. The study reveals that the addition of 3 pct Gr improves the specific strength, toughness, and tribological properties. The Al-CSA composite shows better mechanical properties, such as tensile strength and hardness, than the other three composites. Gr addition helps the hybrid Al-CSA-Gr composite to attain better tribological properties with a slightly lower specific strength. Scanning electron microscopy studies of the worn material surfaces corroborate the findings of the abrasion testing. Elemental analyses by energy-dispersive X-ray spectroscopy of the debris from the counter-face of the tribo surface confirm the presence of Al, O, Si, Fe, Mn, and C.

  19. Organoclay hybrid materials as precursors of porous ZnO/silica-clay heterostructures for photocatalytic applications

    Directory of Open Access Journals (Sweden)

    Marwa Akkari

    2016-12-01

    Full Text Available In this study, ZnO/SiO2-clay heterostructures were successfully synthesized by a facile two-step process applied to two types of clays: montmorillonite layered silicate and sepiolite microfibrous clay mineral. In the first step, intermediate silica–organoclay hybrid heterostructures were prepared following a colloidal route based on the controlled hydrolysis of tetramethoxysilane in the presence of the starting organoclay. Later on, pre-formed ZnO nanoparticles (NP dispersed in 2-propanol were incorporated under ultrasound irradiation to the silica–organoclay hybrid heterostructures dispersed in 2-propanol, and finally, the resulting solids were calcinated to eliminate the organic matter and to produce ZnO nanoparticles (NP homogeneously assembled to the clay–SiO2 framework. In the case of montmorillonite the resulting materials were identified as delaminated clays of ZnO/SiO2-clay composition, whereas for sepiolite, the resulting heterostructure is constituted by the assembling of ZnO NP to the sepiolite–silica substrate only affecting the external surface of the clay. The structural and morphological features of the prepared heterostructures were characterized by diverse physico-chemical techniques (such as XRD, FTIR, TEM, FE-SEM. The efficiency of these new porous ZnO/SiO2-clay heterostructures as potential photocatalysts in the degradation of organic dyes and the removal of pharmaceutical drugs in water solution was tested using methylene blue and ibuprofen compounds, respectively, as model of pollutants.

  20. Novel hybrid nanostructured materials of magnetite nanoparticles and pectin

    Science.gov (United States)

    Sahu, Saurabh; Dutta, Raj Kumar

    2011-04-01

    A novel hybrid nanostructured material comprising superparamagnetic magnetite nanoparticles (MNPs) and pectin was synthesized by crosslinking with Ca2+ ions to form spherical calcium pectinate nanostructures, referred as MCPs, which were typically found to be 100-150 nm in size in dried condition, confirmed from transmission electron microscopy and scanning electron microscopy. The uniform size distribution was revealed from dynamic light scattering measurement. In aqueous medium the MCPs showed swelling behavior with an average size of 400 nm. A mechanism of formation of spherical MCPs is outlined constituting a MNP-pectin interface encapsulated by calcium pectinate at the periphery, by using an array of characterization techniques like zeta potential, thermogravimetry, Fourier transformed infrared and X-ray photoelectron spectroscopy. The MCPs were stable in simulated gastrointestinal fluid and ensured minimal loss of magnetic material. They exhibited superparamagnetic behavior, confirmed from zero field cooled and field cooled profiles and showed high saturation magnetization (Ms) of 46.21 emu/g at 2.5 T and 300 K. Ms decreased with increasing precursor pectin concentrations, attributed to quenching of magnetic moments by formation of a magnetic dead layer on the MNPs.

  1. Donor–acceptor graphene-based hybrid materials facilitating photo-induced electron-transfer reactions

    Directory of Open Access Journals (Sweden)

    Anastasios Stergiou

    2014-09-01

    Full Text Available Graphene research and in particular the topic of chemical functionalization of graphene has exploded in the last decade. The main aim is to increase the solubility and thereby enhance the processability of the material, which is otherwise insoluble and inapplicable for technological applications when stacked in the form of graphite. To this end, initially, graphite was oxidized under harsh conditions to yield exfoliated graphene oxide sheets that are soluble in aqueous media and amenable to chemical modifications due to the presence of carboxylic acid groups at the edges of the lattice. However, it was obvious that the high-defect framework of graphene oxide cannot be readily utilized in applications that are governed by charge-transfer processes, for example, in solar cells. Alternatively, exfoliated graphene has been applied toward the realization of some donor–acceptor hybrid materials with photo- and/or electro-active components. The main body of research regarding obtaining donor–acceptor hybrid materials based on graphene to facilitate charge-transfer phenomena, which is reviewed here, concerns the incorporation of porphyrins and phthalocyanines onto graphene sheets. Through illustrative schemes, the preparation and most importantly the photophysical properties of such graphene-based ensembles will be described. Important parameters, such as the generation of the charge-separated state upon photoexcitation of the organic electron donor, the lifetimes of the charge-separation and charge-recombination as well as the incident-photon-to-current efficiency value for some donor–acceptor graphene-based hybrids, will be discussed.

  2. Structural effect of monomer type on properties of copolyimides and copolyimide-silica hybrid materials

    Directory of Open Access Journals (Sweden)

    Kizilkaya Canan

    2015-01-01

    Full Text Available In this work, the effect of two different diamine monomers, containing phosphine oxide, on thermal, mechanical and morphological properties of copolyimides and their hybrid materials was investigated. Gas separation properties of the synthesized copolyimides were also analysed. Two different diamine monomers with phosphine oxide were bis(3-aminophenyl phenylphosphine oxide (BAPPO and bis(3-aminophenoxy-4-phenyl phenylphosphine oxide (m-BAPPO. In the synthesis of copolyimides 3,3’-diamino-diphenyl sulfone (DDS was also used as the diamine, as well as 2,2’-bis(3,4-dicarboxyphenylhexafluoropropane dianhydride (6FDA. Copolyimide films were prepared by thermal imidization. Hybrid materials containing 5 % SiO2 were synthesised further by sol-gel technique. The Fourier-transform infrared spectroscopy (FTIR, Nuclear magnetic resonance spectroscopy (NMR confirmed the expected structure. Dynamic mechanical analysis (DMA demonstrated that m-BAPPO based copolyimides had lower glass transition temperatures (Tg than BAPPO based copolyimides. m-BAPPO containing copolyimide without silica shifted the thermal decomposition temperature to a higher value. The moduli and strength values of BAPPO diamine containing copolyimide and its hybrid were higher than those of m-BAPPO containing materials. The contact angle measurements showed the hydrophobicity. Scanning electron microscope (SEM analysis exhibited the silica particles dispersion in the copolyimides. These copolyimides may be used in the coating industry. The CO2 permeability and the permselectivity were the highest among the other values in this study, when m-BAPPO containing copolyimide in the absence of silica was used. The gas permeabilities obtained from this work were in this decreasing order: PCO2 > PO2 > PN2.

  3. Effect of probiotic preparation for chemical composition of meat cocks different combinations of hybrid chicks

    Directory of Open Access Journals (Sweden)

    Peter Haščík

    2011-01-01

    Full Text Available In the experiment were verified the application of probiotic preparation through a water supply for feeding of cock’s hybrids Ross 308, Hubbard JV and Cobb 500 in the chemical composition of the most valuable parts of the carcass. Probiotic was based on the strain Lactobacillus fermentum with containing of 1.109 cfu.g−1 and potentially components of maltodextrin and oligofructose in 1% concentration. Length of feeding period was 42 days. Cocks were fed an ad libitum with the same starter mixture HYD-01 to 21th day and from 22nd to 42nd day of feeding with mixture HYD-02 in powdery form. The average of protein content of breast muscle was highest in Hubbard JV hybrid (23.93 g.100 g−1, lower in Cobb 500 hybrid (23.90 g.100 g−1 and lowest in Ross 308 hybrid (23.73 g.100 g−1, without significant differences (P ≥ 0.05 between hybrids and hybrids groups. Effect of probiotics had increased the protein content (P ≥ 0.05 in breast muscle of Ross 308 and Cobb 500 cocks and at the Hubbard JV only lower doses application during the feeding. The average of fat content in 100 g of breast muscle was lowest in Cobb 500 hybrid (1.09 g, higher in Hubbard JV hybrid (1.28 g and highest in Ross 308 hybrid (1.35 g. Effect of probiotic to reduce fat content in breast muscle of cocks was at Ross 308 hybrid (1.33 and 1.23 g.100 g−1, Cobb 500 hybrid (0.98 and 1.02 g.100 g−1 and in second experimental group at Hubbard JV hybrid (1.03 g.100 g−1 statistically significant (P ≥ 0.05 in compared with control group, but significantly (P ≤ 0.05 between hybrids Cobb 500 and Hubbard JV in the first test groups. The average of energy value in 100 g of breast muscle was highest in Hubbard JV hybrid (449.24 kJ, lower in Ross 308 hybrid (448.40 kJ and lowest in Cobb 500 hybrid (441.45 kJ, without significant differences (P ≥ 0.05 between hybrids and hybrids groups. The average of protein content of the femur was highest in Ross 308 hybrid (18.56 g.100

  4. Preparation of material to control precision of calcium selective electrodes.

    Science.gov (United States)

    Fyffe, J A; Jenkins, A S; Bolland, C J; Dryburgh, F J; Gardner, M D

    1981-03-01

    A simple procedure is described for the preparation of a stable precision quality control material for use in the measurement of level of ionised calcium in serum at or near the reference range. Repeat analyses on a Nova 2 ionised calcium analyser of serum pools stored at different temperatures over a period of three months showed coefficients of variation less of less than 4%.

  5. Synthesis of Bioactive Chlorogenic Acid-Silica Hybrid Materials via the Sol-Gel Route and Evaluation of Their Biocompatibility.

    Science.gov (United States)

    Catauro, Michelina; Pacifico, Severina

    2017-07-21

    Natural phenol compounds are gaining a great deal of attention because of their potential use as prophylactic and therapeutic agents in many diseases, as well as in applied science for their preventing role in oxidation deterioration. With the aim to synthetize new phenol-based materials, the sol-gel method was used to embed different content of the phenolic antioxidant chlorogenic acid (CGA) within silica matrices to obtain organic-inorganic hybrid materials. Fourier transform infrared (FTIR) measurements were used to characterize the prepared materials. The new materials were screened for their bioactivity and antioxidant potential. To this latter purpose, direct DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2'-azinobis-(3-ethylbenzothiazolin-6-sulfonic acid) methods were applied: radical scavenging capability appeared strongly dependent on the phenol amount in investigated hybrids, and became pronounced, mainly toward the ABTS radical cation, when materials with CGA content equal to 15 wt% and 20 wt% were analyzed. The in vitro biocompatibility of the synthetized materials was estimated by using the MTT assay towards fibroblast NIH 3T3 cells, human keratinocyte HaCaT cells, and the neuroblastoma SH-SY5Y cell line. As cell viability and morphology of tested cell lines seemed to be unaffected by new materials, the attenuated total reflectance (ATR)-FTIR method was applied to deeply measure the effects of the hybrids in the three different cell lines.

  6. Effect of natural extracts pH on morphological characteristics of hybrid materials based on gold nanoparticles

    Science.gov (United States)

    Olenic, L.; Vulcu, A.; Chiorean, I.; Crisan, M.; Berghian-Grosan, C.; Dreve, S.; David, L.; Tudoran, L. B.; Kacso, I.; Bratu, I.; Neamtu, C.; Voica, C.

    2013-11-01

    In the present paper we have investigated the pH influence on the morphology of some new hybrid materials based on gold nanoparticles and natural extracts from fruits of Romanian native plants of Adoxaceae family (Viburnum opulus L. and Sambucus nigra L.). It is well known that the natural plants extracts are beneficial for humans thanks to their antioxidant, anti-inflammatory and immunomodulatory effects. The biological activity of these berries is mainly due to their high content of anthocyanins and other polyphenols. The nanoparticles facilitate the penetration of substances in skin, enhancing their antimitotic, anti-inflammatory and antibiotic properties. We have chosen the optimal method to get these materials in which gold nanoparticles of 10-80 nm were obtained. We characterized them by UV-Vis and FT-IR spectroscopy, by TEM and DSC. Creams prepared with the hybrid materials have been tested on psoriatic lesions and the medical results emphasized a remarkable improvement in this diseases.

  7. Graphene–Selenium Hybrid Microballs as Cathode Materials for High-performance Lithium–Selenium Secondary Battery Applications

    Science.gov (United States)

    Youn, Hee-Chang; Jeong, Jun Hui; Roh, Kwang Chul; Kim, Kwang-Bum

    2016-08-01

    In this study, graphene–selenium hybrid microballs (G–SeHMs) are prepared in one step by aerosol microdroplet drying using a commercial spray dryer, which represents a simple, scalable continuous process, and the potential of the G–SeHMs thus prepared is investigated for use as cathode material in applications of lithium–selenium secondary batteries. These morphologically unique graphene microballs filled with Se particles exhibited good electrochemical properties, such as high initial specific capacity (642 mA h g‑1 at 0.1 C, corresponding to Se electrochemical utilisation as high as 95.1%), good cycling stability (544 mA h g‑1 after 100 cycles at 0.1 C 84.5% retention) and high rate capability (specific capacity of 301 mA h g‑1 at 5 C). These electrochemical properties are attributed to the fact that the G–SeHM structure acts as a confinement matrix for suppressing the dissolution of polyselenides in the organic electrolyte, as well as an electron conduction path for increasing the transport rate of electrons for electrochemical reactions. Notably, based on the weight of hybrid materials, electrochemical performance is considerably better than that of previously reported Se-based cathode materials, attributed to the high Se loading content (80 wt%) in hybrid materials.

  8. Smart designing of new hybrid materials based on brushite-alginate and monetite-alginate microspheres: Bio-inspired for sequential nucleation and growth

    OpenAIRE

    2014-01-01

    In this report new hybrid materials based on brushite-alginate and monetite-alginate were prepared by self-assembling alginate chains and phosphate source ions via a gelation process with calcium ions. The alginate served as nanoreactor for nucleation and growth of brushite or/and monetite due to its gelling and swelling properties. The alginate gel framework, the crystalline phase and morphology of formed hybrid biomaterials were shown to be strongly dependent upon the concentration of the p...

  9. Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy

    Science.gov (United States)

    Siqueira, Leonardo J. A.; Constantino, Vera R. L.; Camilo, Fernanda F.; Torresi, Roberto M.; Temperini, Marcia L. A.; Ribeiro, Mauro C. C.; Izumi, Celly M. S.

    2014-03-01

    Hybrid organic-inorganic material containing Laponite clay and ionic liquids forming cations have been prepared and characterized by FT-Raman spectroscopy, X-ray diffraction, and thermal analysis. The effect of varying the length of the alkyl side chain and conformations of cations has been investigated by using different ionic liquids based on piperidinium and imidazolium cations. The structure of the N,N-butyl-methyl-piperidinium cation and the assignment of its vibrational spectrum have been further elucidated by quantum chemistry calculations. The X-ray data indicate that the organic cations are intercalated parallel to the layers of the clay. Comparison of Raman spectra of pure ionic liquids with different anions and the resulting solid hybrid materials in which the organic cations have been intercalated into the clay characterizes the local environment experienced by the cations in the hybrid materials. The Raman spectra of hybrid materials suggest that the local environment of all confined cations, in spite of this diversity in properties, resembles the liquid state of ionic liquids with a relatively disordered structure.

  10. Preparation of Lanthanide-Polymer Composite Material via Click Chemistry.

    Science.gov (United States)

    Chen, Bin; Wen, Guian; Wu, Jiajie; Feng, Jiachun

    2015-10-01

    Covalently attaching lanthanide complexes to the polymer backbone can effectively reduce the clustering of lanthanides and thus become an important strategy to fully unleash their potential. In this Communication, a metal-free click reaction is used for the first time to link a lanthanide complex to the polymer matrix. A diene-bearing copolymer with anthracenylmethyl methacrylate as a monomer and a dienophile-bearing lanthanide complex with 5-maleimido-1,10-phenanthroline as the second ligand are synthesized and coupled together through a Diels-Alder cycloaddition (DA). A comparative investigation demonstrates that the composite material prepared by DA click reaction shows the highest quantum yields in the same lanthanide concentration as compared to materials prepared by widely used "directly doping" and "in situ coordinating lanthanide ions with macromolecular ligand" approaches. This work suggests that the "metal-free" DA click reaction can be a promising tool in the synthesis of high efficient lanthanide functionalized polymeric materials.

  11. Preparation of a Novel Coal Gangue-Polyacrylamide Hybrid Flocculant and Its Flocculation Performance

    Institute of Scientific and Technical Information of China (English)

    Xiangao Quan; Huiyun Wang

    2014-01-01

    A novel flocculant based on hybrid coal gangue-polyacrylamide (HCGPAM) has been prepared by using modified coal gangue and polyacrylamide. Factors related to the preparation such as reaction time, temperature, concentration of the polymer monomer and ratio of initiators are investigated. The product is characterized by infrared spectra (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), aswell as viscometry. The flocculating tests on oilfield drilling wastewater show that the removal efficiency is 85.5% and the light transmittance is 53.6%. The results indicate that the coal gangue could be used for the preparation of inorganic-organic hybrid flocculant and the removal efficiency is much higher than that of commercial polyacrylamide (PAM) or PAM/ coal gangue blend.

  12. Hybrid-Type Organic Thermoelectric Materials Containing Nanoparticles as a Carrier Transport Promoter

    Science.gov (United States)

    Oshima, Keisuke; Inoue, Junta; Sadakata, Shifumi; Shiraishi, Yukihide; Toshima, Naoki

    2017-05-01

    Carbon nanotubes (CNTs) have recently received much attention as thermoelectric materials. Although the carrier mobility within a single CNT is very high, the charge carrier transport between CNTs is quite slow. We have utilized nanoparticles (NPs) for promotion of the carrier transport between CNTs for improving their thermoelectric performance. Poly(vinyl chloride) (PVC) was used as a binder of the CNTs. Thus, hybrid-type organic thermoelectric materials containing the NPs were constructed from Pd NPs, CNTs, and PVC. The thermoelectric properties were slightly improved in the three-component films by only mixing the separately-prepared Pd NPs. The NPs of a polymer complex, poly(nickel 1,1,2,2-ethenetetrathiolate) (n-PETT), were also used as a charge carrier transport promoter instead of the Pd NPs to produce n-PETT/CNT/PVC hybrid films. Treatment of the three-component films with methanol produced a high thermoelectric power factor and low thermal conductivity, resulting in a high "apparent" thermoelectric performance ( ZT ˜ 0.3 near room temperature) although the thermal conductivity was measured in the through-plane direction, which is a different direction from that for the electrical conductivity.

  13. Hybrid-Type Organic Thermoelectric Materials Containing Nanoparticles as a Carrier Transport Promoter

    Science.gov (United States)

    Oshima, Keisuke; Inoue, Junta; Sadakata, Shifumi; Shiraishi, Yukihide; Toshima, Naoki

    2016-08-01

    Carbon nanotubes (CNTs) have recently received much attention as thermoelectric materials. Although the carrier mobility within a single CNT is very high, the charge carrier transport between CNTs is quite slow. We have utilized nanoparticles (NPs) for promotion of the carrier transport between CNTs for improving their thermoelectric performance. Poly(vinyl chloride) (PVC) was used as a binder of the CNTs. Thus, hybrid-type organic thermoelectric materials containing the NPs were constructed from Pd NPs, CNTs, and PVC. The thermoelectric properties were slightly improved in the three-component films by only mixing the separately-prepared Pd NPs. The NPs of a polymer complex, poly(nickel 1,1,2,2-ethenetetrathiolate) (n-PETT), were also used as a charge carrier transport promoter instead of the Pd NPs to produce n-PETT/CNT/PVC hybrid films. Treatment of the three-component films with methanol produced a high thermoelectric power factor and low thermal conductivity, resulting in a high "apparent" thermoelectric performance (ZT ˜ 0.3 near room temperature) although the thermal conductivity was measured in the through-plane direction, which is a different direction from that for the electrical conductivity.

  14. Smart designing of new hybrid materials based on brushite-alginate and monetite-alginate microspheres: Bio-inspired for sequential nucleation and growth

    Energy Technology Data Exchange (ETDEWEB)

    Amer, Walid [MAScIR Foundation, INANOTECH, Rabat Design, Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat (Morocco); Abdelouahdi, Karima [Centre National pour la Recherche Scientifique et Technique (CNRST), Division UATRS, Angle Allal Fassi/FAR, B.P. 8027, Hay Riad, 10000 Rabat (Morocco); Ramananarivo, Hugo Ronald; Fihri, Aziz; El Achaby, Mounir [MAScIR Foundation, INANOTECH, Rabat Design, Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat (Morocco); Zahouily, Mohamed [Laboratoire de Matériaux, Catalyse et Valorisation des Ressources Naturelles, URAC 24, Faculté des Sciences et Techniques, Université Hassan II, Mohammedia B.P. 146, 20650 (Morocco); Barakat, Abdellatif [SUPAGRO-INRA-CIRAD-UMR IATE 1208, Ingenierie des Agropolymères et Technologies Emergentes, 2, Place Pierre Viala-Bât 31, 34060 Montpellier cedex 1 (France); Djessas, Kamal [CNRS-PROMES Tecnosud, F-66100 Perpignan (France); Clark, James [Green Chemistry, Centre of Excellence, University of York, York YO10 5DD (United Kingdom); Solhy, Abderrahim, E-mail: a.solhy@mascir.com [MAScIR Foundation, INANOTECH, Rabat Design, Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat (Morocco)

    2014-02-01

    In this report new hybrid materials based on brushite-alginate and monetite-alginate were prepared by self-assembling alginate chains and phosphate source ions via a gelation process with calcium ions. The alginate served as nanoreactor for nucleation and growth of brushite or/and monetite due to its gelling and swelling properties. The alginate gel framework, the crystalline phase and morphology of formed hybrid biomaterials were shown to be strongly dependent upon the concentration of the phosphate precursors. These materials were characterized by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDX). - Graphical abstract: A new class of hybrid materials based on brushite{sub a}lginate and monetite{sub a}lginate were prepared for the first time by adopting a soft and clean route. Thanks to their gelling and swelling properties, alginate porous polysaccharide microspheres behave as nanoreactors for nucleating, growing and hosting of the phosphate cements such as brushite or monetite. - Highlights: • New structured hybrid materials are prepared from biopolymer and phosphates. • Evidence for a new route for the synthesis of hybrid materials alginate-brushite and alginate-monetite via ionotropic gel of alginate. • The concentration of phosphate has a role crucial for selectivity to monetite or brushite.

  15. New materials for sample preparation techniques in bioanalysis.

    Science.gov (United States)

    Nazario, Carlos Eduardo Domingues; Fumes, Bruno Henrique; da Silva, Meire Ribeiro; Lanças, Fernando Mauro

    2017-02-01

    The analysis of biological samples is a complex and difficult task owing to two basic and complementary issues: the high complexity of most biological matrices and the need to determine minute quantities of active substances and contaminants in such complex sample. To succeed in this endeavor samples are usually subject to three steps of a comprehensive analytical methodological approach: sample preparation, analytes isolation (usually utilizing a chromatographic technique) and qualitative/quantitative analysis (usually with the aid of mass spectrometric tools). Owing to the complex nature of bio-samples, and the very low concentration of the target analytes to be determined, selective sample preparation techniques is mandatory in order to overcome the difficulties imposed by these two constraints. During the last decade new chemical synthesis approaches has been developed and optimized, such as sol-gel and molecularly imprinting technologies, allowing the preparation of novel materials for sample preparation including graphene and derivatives, magnetic materials, ionic liquids, molecularly imprinted polymers, and much more. In this contribution we will review these novel techniques and materials, as well as their application to the bioanalysis niche. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. The Electrochemical Characteristics of Hybrid Capacitor Prepared by Chemical Activation of NaOH

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jeong Eun; Bae, Ga Yeong; Yang, Jeong Min; Lee, Jong Dae [Chungbuk National Univ., Chungju (Korea, Republic of)

    2013-06-15

    Active carbons with high specific surface area and micro pore structure were prepared from the coconut shell char using the chemical activation method of NaOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to char ratio and the flow rate of gas during carbonization. The active carbons with the surface area (2,481m{sup 2}/g) and mean pore size (2.32 nm) were obtained by chemical activation with NaOH. The electrochemical performances of hybrid capacitor were investigated using LiMn{sub 2}O{sub 4}, LiCoO{sub 2} as the positive electrode and prepared active carbon as the negative electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes (LiPF{sub 6}, TEABF{sub 4}) were characterized by constant current charge/discharge, cyclic voltammetry, cycle and leakage tests. The hybrid capacitor using LiMn{sub 2}O{sub 4}/AC electrodes had better capacitance than other hybrid systems and was able to deliver a specific energy as high as 131 Wh/kg at a specific power of 1,448 W/kg.

  17. Preparation of improved catalytic materials for water purification

    Science.gov (United States)

    Cherkezova-Zheleva, Z.; Paneva, D.; Tsvetkov, M.; Kunev, B.; Milanova, M.; Petrov, N.; Mitov, I.

    2014-04-01

    The aim of presented paper was to study preparation of catalytic materials for water purification. Iron oxide (Fe3O4) samples supported on activated carbon were prepared by wet impregnation method and low temperature heating in an inert atmosphere. The as-prepared, activated and samples after catalytic test were characterized by Mössbauer spectroscopy and X-ray diffraction. The obtained X-ray diffraction patterns of prepared samples show broad and low-intensity peaks of magnetite phase and the characteristic peaks of the activated carbon. The average crystallite size of magnetite particles was calculated below 20 nm. The registered Mössbauer spectra of prepared materials show a superposition of doublet lines or doublet and sextet components. The calculated hyperfine parameters after spectra evaluation reveal the presence of magnetite phase with nanosize particles. Relaxation phenomena were registered in both cases, i.e. superparamagnetism or collective magnetic excitation behavior, respectively. Low temperature Mössbauer spectra confirm this observation. Application of materials as photo-Fenton catalysts for organic pollutions degradation was studied. It was obtained high adsorption degree of dye, extremely high reaction rate and fast dye degradation. Photocatalytic behaviour of a more active sample was enhanced using mechanochemical activation (MCA). The nanometric size and high dispersion of photocatalyst particles influence both the adsorption and degradation mechanism of reaction. The results showed that all studied photocatalysts effectively decompose the organic pollutants under UV light irradiation. Partial oxidation of samples after catalytic tests was registered. Combination of magnetic particles with high photocatalytic activity meets both the requirements of photocatalytic degradation of water contaminants and that of recovery for cyclic utilization of material.

  18. Preparation and Properties of Orthogonal Piezoelectric Composite Materials

    Institute of Scientific and Technical Information of China (English)

    Liu Jun; Lu Ying; Zhang Xingguo; Shen Yi; Chen Chun

    2004-01-01

    . PZT piezoelectric ceramic with La2O3, SrCO3, BaO and Sb2O5 was prepared. It has high value of the piezoelectric strain constant d33 ( -681 PC/N) and high value of-d33/d31 (2.65). Orthogonal piezoelectric composite materials was designed and prepared by PZT, DAD- 40 electric conductive adhesive and E51 epoxy resin. The OPCM shows obvious orthogonal anisotropy. The matching property of the interface between piezoelectric ceramic and polymer of OPCM relies on the defects of interface. The proper conductive mid-layer could improve the matching property of the interface.

  19. Preparation and Characterization of Novel Electrospinnable PBT/POSS Hybrid Systems Starting from c-PBT

    Directory of Open Access Journals (Sweden)

    Lorenza Gardella

    2015-01-01

    Full Text Available Novel hybrid systems based on poly(butyleneterephthalate (PBT and polyhedral oligomeric silsesquioxanes (POSS have been prepared by applying the ring-opening polymerization of cyclic poly(butyleneterephthalate oligomers. Two types of POSS have been used: one characterized by hydroxyl functionalities (named POSS-OH and another without specific reactive groups (named oib-POSS. It was demonstrated that POSS-OH acts as an initiator for the polymerization reaction, leading to the direct insertion of the silsesquioxane into the polymer backbone. Among the possible applications of the PBT/POSS hybrid system, the possibility to obtain nanofibers has been assessed in this work.

  20. White-light emission of polyvinyl alcohol/ZnO hybrid nanofibers prepared by electrospinning

    Science.gov (United States)

    Sui, X. M.; Shao, C. L.; Liu, Y. C.

    2005-09-01

    Polyvinyl alcohol/ZnO (PVA/ZnO) hybrid nanofibers were prepared by the electrospinning technique. The structural and spectral information of the nanofibers was characterized by scanning electron microscopy, x-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, resonant Raman, and photoluminescence (PL). The results indicate that ZnO were successfully embedded in the one-dimensional hybrid fibers via chemical interactions between ZnO and PVA. PL results show the PVA/ZnO nanofibers have an intense white-light emission, which originates from the simultaneous emission of three bands covering from the UV to visible range. A possible PL mechanism was proposed accordingly.

  1. Preparation of Magnetic Hybrid Microspheres with Well-Defined Yolk-Shell Structure

    Directory of Open Access Journals (Sweden)

    Yuan Zhao

    2016-01-01

    Full Text Available A facile and efficient route was reported to prepare a kind of yolk-shell magnetic hybrid microspheres by suspension polymerization and calcinations method. The morphology, structure, and composition of the magnetic microspheres were characterized by FTIR, XRD, TEM, SEM, and TGA analysis. The vibrating-sample magnetometry (VSM results clearly showed that the magnetic particles were superparamagnetic with saturation magnetization of 32.82 emu/g which makes the microcomposites easily controlled by an external magnetic field. The results revealed that the magnetic hybrid microspheres might have important applications in magnetic bioseparation and drug delivery.

  2. Preparation of Internal Quality Control Material for Lymphocyte Subset Analysis.

    Science.gov (United States)

    Roh, Eun Youn; Shin, Sue; Yoon, Jong Hyun; Oh, Sohee; Park, Kyoung Un; Lee, Nuri; Song, Eun Young

    2016-07-01

    Lymphocyte subset analysis is widely used in clinical laboratories, and more than two levels of daily QC materials are required for reliable results. Commercially available, expensive QC materials have short shelf lives and may not be suitable in resource-poor settings. We compared different methods for preparing homemade QC material, including fixation with 1%, 2%, or 4% paraformaldehyde (PFA); freezing with 10% dimethylsulfoxide (DMSO), 0.1% bovine serum albumin-phosphate buffered saline, or after ethanolic dehydration; and using cryopreservation temperatures of -20°C, -80°C, or -196°C. We found an optimal experimental condition, which is 'fixation with 4% PFA, freezing with 10% DMSO, and storage at 80°C'. To evaluate long-term stability of QC materials prepared in this optimal condition, two levels of QC materials (QM1 and QM2) were thawed after 30, 33, 35, 37, 60, 62, 64, and 67 days of cryopreservation. Lymphocyte subset was analyzed with BD Multitest IMK kit (BD Biosciences, USA). QM1 and QM2 were stable after 1-2 months of cryopreservation (CV materials for lymphocyte subset analysis in resource-poor settings.

  3. Energy and charge transfer in nanoscale hybrid materials.

    Science.gov (United States)

    Basché, Thomas; Bottin, Anne; Li, Chen; Müllen, Klaus; Kim, Jeong-Hee; Sohn, Byeong-Hyeok; Prabhakaran, Prem; Lee, Kwang-Sup

    2015-06-01

    Hybrid materials composed of colloidal semiconductor quantum dots and π-conjugated organic molecules and polymers have attracted continuous interest in recent years, because they may find applications in bio-sensing, photodetection, and photovoltaics. Fundamental processes occurring in these nanohybrids are light absorption and emission as well as energy and/or charge transfer between the components. For future applications it is mandatory to understand, control, and optimize the wide parameter space with respect to chemical assembly and the desired photophysical properties. Accordingly, different approaches to tackle this issue are described here. Simple organic dye molecules (Dye)/quantum dot (QD) conjugates are studied with stationary and time-resolved spectroscopy to address the dynamics of energy and ultra-fast charge transfer. Micellar as well as lamellar nanostructures derived from diblock copolymers are employed to fine-tune the energy transfer efficiency of QD donor/dye acceptor couples. Finally, the transport of charges through organic components coupled to the quantum dot surface is discussed with an emphasis on functional devices.

  4. Novel hybrid nanostructured materials of magnetite nanoparticles and pectin

    Energy Technology Data Exchange (ETDEWEB)

    Sahu, Saurabh [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247 667 (India); Dutta, Raj Kumar, E-mail: duttafcy@iitr.ernet.i [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247 667 (India)

    2011-04-15

    A novel hybrid nanostructured material comprising superparamagnetic magnetite nanoparticles (MNPs) and pectin was synthesized by crosslinking with Ca{sup 2+} ions to form spherical calcium pectinate nanostructures, referred as MCPs, which were typically found to be 100-150 nm in size in dried condition, confirmed from transmission electron microscopy and scanning electron microscopy. The uniform size distribution was revealed from dynamic light scattering measurement. In aqueous medium the MCPs showed swelling behavior with an average size of 400 nm. A mechanism of formation of spherical MCPs is outlined constituting a MNP-pectin interface encapsulated by calcium pectinate at the periphery, by using an array of characterization techniques like zeta potential, thermogravimetry, Fourier transformed infrared and X-ray photoelectron spectroscopy. The MCPs were stable in simulated gastrointestinal fluid and ensured minimal loss of magnetic material. They exhibited superparamagnetic behavior, confirmed from zero field cooled and field cooled profiles and showed high saturation magnetization (M{sub s}) of 46.21 emu/g at 2.5 T and 300 K. M{sub s} decreased with increasing precursor pectin concentrations, attributed to quenching of magnetic moments by formation of a magnetic dead layer on the MNPs. - Research highlights: > In the present investigation we have developed a facile route to synthesize a novel, low cost calcium pectinate nanostructure functionalized with SPIONs (magnetite nanoparticles). > Though there are sufficient scientific illustrations on polymer as well as biopolymers coated on SPIONs for various biomedical applications, the one presented here, is novel of its kind as it is considered to offer a new dimension to the magnetic responsive properties of calcium pectinate nanomaterials towards biomedical applications, especially as a potential carrier for magnetically targeted drug delivery to colon specific sites. > The synthesis of these nanostructured

  5. Preparation of supramolecular hydrogel-enzyme hybrids exhibiting biomolecule-responsive gel degradation.

    Science.gov (United States)

    Shigemitsu, Hajime; Fujisaku, Takahiro; Onogi, Shoji; Yoshii, Tatsuyuki; Ikeda, Masato; Hamachi, Itaru

    2016-09-01

    Hydrogelators are small, self-assembling molecules that form supramolecular nanofiber networks that exhibit unique dynamic properties. Development of supramolecular hydrogels that degrade in response to various biomolecules could potentially be used for applications in areas such as drug delivery and diagnostics. Here we provide a synthetic procedure for preparing redox-responsive supramolecular hydrogelators that are used to create hydrogels that degrade in response to oxidizing or reducing conditions. The synthesis takes ∼2-4 d, and it can potentially be carried out in parallel to prepare multiple hydrogelator candidates. This described solid-phase peptide synthesis protocol can be used to produce previously described hydrogelators or to construct a focused molecular library to efficiently discover and optimize new hydrogelators. In addition, we describe the preparation of redox-responsive supramolecular hydrogel-enzyme hybrids that are created by mixing aqueous solutions of hydrogelators and enzymes, which requires 2 h for completion. The resultant supramolecular hydrogel-enzyme hybrids exhibit gel degradation in response to various biomolecules, and can be rationally designed by connecting the chemical reactions of the hydrogelators with enzymatic reactions. Gel degradation in response to biomolecules as triggers occurs within a few hours. We also describe the preparation of hydrogel-enzyme hybrids arrayed on flat glass slides, enabling high-throughput analysis of biomolecules such as glucose, uric acid, lactate and so on by gel degradation, which is detectable by the naked eye. The protocol requires ∼6 h to prepare the hydrogel-enzyme hybrid array and to complete the biomolecule assay.

  6. Preparation of hybrid nano biocomposite κ-carrageenan/cellulose nanocrystal/nanoclay

    Science.gov (United States)

    Zakuwan, Siti Zarina; Ahmad, Ishak; Ramli, Nazaruddin

    2013-11-01

    Biodegradable composites film based on κ-carrageenan and nano particles as filler was prepared to study the mechanical strength of carrageenan composites. Solution casting technique was used to prepare_this biocomposite. Preparation of composite film and nano filler involve two stages, preparation of cellulose nanocrystals (CNC) from kenaf with alkali treatment, bleaching, and hydrolysis followed by the preparation of two types of nano composite. Tensile test was carried on the composite film based on κ-carrageenan with the variation percentage of CNC and nano clay to obtain the optimum CNC and nano clay loading. After that hybrid nano-biocomposite film based on κ-carrageenan with the variation percentage of CNC/nano clay (OMMT) according to optimum value of composite carrageenan/CNC and composite carrageenan/nano clay film was prepared. The effect of nano filler on the mechanical properties of carrageenan films was examined. κ-carrageenan biocomposite increased with the optimum at 4% CNC and nano clay composition. Additional improvement of tensile strength with hybridization of CNC and nanoclay indicated better mechanical properties.

  7. Design, preparation, and application of ordered porous polymer materials

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Qingquan, E-mail: qqliu@hnust.edu.cn; Tang, Zhe; Ou, Baoli; Liu, Lihua; Zhou, Zhihua, E-mail: zhou7381@126.com; Shen, Shaohua; Duan, Yinxiang

    2014-04-01

    Ordered porous polymer (OPP) materials have extensively application prospects in the field of separation and purification, biomembrane, solid supports for sensors catalysts, scaffolds for tissue engineering, photonic band gap materials owing to ordered pore arrays, uniform and tunable pore size, high specific surface area, great adsorption capacity, and light weight. The present paper reviewed the preparation techniques of OPP materials like breath figures, hard template, and soft template. Finally, the applications of OPP materials in the field of separation, sensors, and biomedicine are introduced, respectively. - Highlights: • Breath figures involve polymer casting under moist ambience. • Hard template employs monodisperse colloidal spheres as a template. • Soft template utilizes the etched block in copolymers as template.

  8. Preparation and characterization of multifunctional magnetic mesoporous calcium silicate materials

    Directory of Open Access Journals (Sweden)

    Jianhua Zhang, Yufang Zhu, Jie Li, Min Zhu, Cuilian Tao and Nobutaka Hanagata

    2013-01-01

    Full Text Available We have prepared multifunctional magnetic mesoporous Fe–CaSiO3 materials using triblock copolymer (P123 as a structure-directing agent. The effects of Fe substitution on the mesoporous structure, in vitro bioactivity, magnetic heating ability and drug delivery property of mesoporous CaSiO3 materials were investigated. Mesoporous Fe–CaSiO3 materials had similar mesoporous channels (5–6 nm with different Fe substitution. When 5 and 10% Fe were substituted for Ca in mesoporous CaSiO3 materials, mesoporous Fe–CaSiO3 materials still showed good apatite-formation ability and had no cytotoxic effect on osteoblast-like MC3T3-E1 cells evaluated by the elution cell culture assay. On the other hand, mesoporous Fe–CaSiO3 materials could generate heat to raise the temperature of the surrounding environment in an alternating magnetic field due to their superparamagnetic property. When we use gentamicin (GS as a model drug, mesoporous Fe–CaSiO3 materials release GS in a sustained manner. Therefore, magnetic mesoporous Fe–CaSiO3 materials would be a promising multifunctional platform with bone regeneration, local drug delivery and magnetic hyperthermia.

  9. Preparation and characterization of multifunctional magnetic mesoporous calcium silicate materials

    Science.gov (United States)

    Zhang, Jianhua; Zhu, Yufang; Li, Jie; Zhu, Min; Tao, Cuilian; Hanagata, Nobutaka

    2013-10-01

    We have prepared multifunctional magnetic mesoporous Fe-CaSiO3 materials using triblock copolymer (P123) as a structure-directing agent. The effects of Fe substitution on the mesoporous structure, in vitro bioactivity, magnetic heating ability and drug delivery property of mesoporous CaSiO3 materials were investigated. Mesoporous Fe-CaSiO3 materials had similar mesoporous channels (5-6 nm) with different Fe substitution. When 5 and 10% Fe were substituted for Ca in mesoporous CaSiO3 materials, mesoporous Fe-CaSiO3 materials still showed good apatite-formation ability and had no cytotoxic effect on osteoblast-like MC3T3-E1 cells evaluated by the elution cell culture assay. On the other hand, mesoporous Fe-CaSiO3 materials could generate heat to raise the temperature of the surrounding environment in an alternating magnetic field due to their superparamagnetic property. When we use gentamicin (GS) as a model drug, mesoporous Fe-CaSiO3 materials release GS in a sustained manner. Therefore, magnetic mesoporous Fe-CaSiO3 materials would be a promising multifunctional platform with bone regeneration, local drug delivery and magnetic hyperthermia.

  10. Preparation of A New Type of Stress-absorbed Material

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; YANG Tao; YUAN Hai-qing

    2004-01-01

    Neoprene latex modified emulsified bitumen and fine aggregate are used to prepare a new type of stress-absorbed material, which has strong ability of anti-reflective cracking on asphalt concrete over layer-constructed upon a semi-rigid type base course or cement concrete pavement block. Experimental results demonstrate the stress-absorbed material have excellent mechanical properties including a low modulus of elasticity, high ultimate tensile stress and strain, and a strong distortion ability. Stress concentration in asphalt over layer originated by temperature changes and traffic loads can be alleviated.

  11. Polylactide-based bionanocomposites: a promising class of hybrid materials.

    Science.gov (United States)

    Sinha Ray, Suprakas

    2012-10-16

    Polylactide (PLA) is the oldest and potentially one of the most interesting and useful biodegradable man-made polymers because of its renewable origin, controlled synthesis, good mechanical properties, and inherent biocompatibility. The blending of PLA with functional nanoparticles can yield a new class of hybrid materials, commonly known as bionanocomposites, where 1-5% nanoparticles by volume are molecularly dispersed within the PLA matrix. The dispersed nanoparticles with their large surface areas and low percolation thresholds both can improve the properties significantly in comparison with neat PLA and can introduce new value-added properties. Recently, researchers have made extraordinary progress in the practical processing and development of products from PLA bionanocomposites. The variation of the nanofillers with different functionalities can lead to many bionanocomposite applications including environmentally friendly packaging, materials for construction, automobiles, and tissue regeneration, and load-bearing scaffolds for bone reconstruction. This Account focuses on these recent research efforts, processing techniques, and key research challenges in the development of PLA-based bionanocomposites for use in applications from green plastics to biomedical applications. Growing concerns over environmental issues and high demand for advanced polymeric materials with balanced properties have led to the development of bionanocomposites of PLA and natural origin fillers, such as nanoclays. The combination of nanoclays with the PLA matrix allows us to develop green nanocomposites that possess several superior properties. For example, adding ∼5 vol % clay to PLA improved the storage modulus, tensile strength, break elongation, crystallization rate, and other mechanical properties. More importantly, the addition of clay decreases the gas and water vapor permeation, increases the heat distortion temperature and scratch resistance, and controls the biodegradation

  12. Preparation and Photochromic Properties of Hybrid Thin Films Based on Heteropolyoxometallate and Polyacrylamide

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    series of photochromic hybrid films were prepared through entrapping Dawson type tungsten heteropolyoxometallates (P2W18O626-) and molybdenum heteropolyoxometallate (P2Mo18O626-) into polyacrylamide matrix. FTIR results showed that the Dawson geometry of heteropolyoxometallates is still preserved inside the composites and strong coulombic interaction is built between heteropolyoxometallates and polyacrylamide via hydrogen bonding. Irradiated with ultraviolet light, the transparent films change from colorless to blue and show reversible photochromism.The bleaching process occurs when the films are in contact with air or O2 in the dark. The molybdenum heteropolyoxometallate hybrid film has higher photochromic efficiency and slower bleaching reaction than tungsten heteropolyoxometallate hybrid film. ESR results indicated that polyacrylamide is a hydrogen donor and the photoreduced process is in accordance with the radical mechanism.

  13. Preparation and gas sensing properties of novel CdS-supramolecular organogel hybrid films

    Science.gov (United States)

    Xia, Huiyun; Peng, Junxia; Liu, Kaiqiang; Li, Chen; Fang, Yu

    2008-05-01

    A novel CdS-supramolecular organogel hybrid film with unusual morphology has been fabricated by exposing a supramolecular organogel film containing Cd(Ac)2 in an H2S atmosphere at room temperature. The organogel film was prepared by spin-coating a LMOG (low-molecular weight organic gelator) gel of dmethyl sulfoxide onto a glass plate substrate. XRD, SEM, EDS, TG-DTA, UV-vis, PL (photoluminescence) spectroscopy and PL lifetime measurements were employed to characterize the film. It was shown that the organogel film had functioned as a template to control the morphology of the final hybrid film. The quantities and sizes of the CdS particles embedded in the organogel films can be easily altered by varying the initial concentration of Cd(Ac)2. Importantly, the PL of the hybrid film is sensitive to the presence of some volatile organic monoamines and diamines. The selectivity and reversibility of the sensing process were investigated.

  14. Fluorescence in situ hybridization of old G-banded and mounted chromosome preparations

    DEFF Research Database (Denmark)

    Gerdes, A M; Pandis, N; Bomme, L;

    1997-01-01

    , that the amount of added probe is increased approximately 2.5 times, and that the amplification of signals is performed twice. The applicability of the method, which allows double painting with two differently labeled probes using two differently fluorescing colors, was tested on 11 cases involving different......An improved method for fluorescence in situ hybridization (FISH) investigation of old, previously G-banded, mounted chromosome preparations with chromosome specific painting probes and centromere-specific probes is described. Before hybridization, the slides are incubated in xylene until...... the coverslips detach spontaneously; any mechanical manipulation will jeopardize the results. The success of chromosome painting is improved by excluding the regular RNase treatment step prior to hybridization. Additional changes compared with standard FISH protocols are that the 2 x SSC step is omitted...

  15. Preparation and reactivity of gasless nanostructured energetic materials.

    Science.gov (United States)

    Manukyan, Khachatur V; Shuck, Christopher E; Rogachev, Alexander S; Mukasyan, Alexander S

    2015-04-02

    High-Energy Ball Milling (HEBM) is a ball milling process where a powder mixture placed in the ball mill is subjected to high-energy collisions from the balls. Among other applications, it is a versatile technique that allows for effective preparation of gasless reactive nanostructured materials with high energy density per volume (Ni+Al, Ta+C, Ti+C). The structural transformations of reactive media, which take place during HEBM, define the reaction mechanism in the produced energetic composites. Varying the processing conditions permits fine tuning of the milling-induced microstructures of the fabricated composite particles. In turn, the reactivity, i.e., self-ignition temperature, ignition delay time, as well as reaction kinetics, of high energy density materials depends on its microstructure. Analysis of the milling-induced microstructures suggests that the formation of fresh oxygen-free intimate high surface area contacts between the reagents is responsible for the enhancement of their reactivity. This manifests itself in a reduction of ignition temperature and delay time, an increased rate of chemical reaction, and an overall decrease of the effective activation energy of the reaction. The protocol provides a detailed description for the preparation of reactive nanocomposites with tailored microstructure using short-term HEBM method. It also describes a high-speed thermal imaging technique to determine the ignition/combustion characteristics of the energetic materials. The protocol can be adapted to preparation and characterization of a variety of nanostructured energetic composites.

  16. Characterization of Zeolite in Zeolite-Geopolymer Hybrid Bulk Materials Derived from Kaolinitic Clays

    Directory of Open Access Journals (Sweden)

    Hayami Takeda

    2013-05-01

    Full Text Available Zeolite-geopolymer hybrid materials have been formed when kaolin was used as a starting material. Their characteristics are of interest because they can have a wide pore size distribution with micro- and meso-pores due to the zeolite and geopolymer, respectively. In this study, Zeolite-geopolymer hybrid bulk materials were fabricated using four kinds of kaolinitic clays (a halloysite and three kinds of kaolinite. The kaolinitic clays were first calcined at 700 °C for 3 h to transform into the amorphous aluminosilicate phases. Alkali-activation treatment of the metakaolin yielded bulk materials with different amounts and types of zeolite and different compressive strength. This study investigated the effects of the initial kaolinitic clays on the amount and types of zeolite in the resultant geopolymers as well as the strength of the bulk materials. The kaolinitic clays and their metakaolin were characterized by XRD analysis, chemical composition, crystallite size, 29Si and 27Al MAS NMR analysis, and specific surface area measurements. The correlation between the amount of zeolite formed and the compressive strength of the resultant hybrid bulk materials, previously reported by other researchers was not positively observed. In the studied systems, the effects of Si/Al and crystalline size were observed. When the atomic ratio of Si/Al in the starting kaolinitic clays increased, the compressive strength of the hybrid bulk materials increased. The crystallite size of the zeolite in the hybrid bulk materials increased with decreasing compressive strength of the hybrid bulk materials.

  17. Biotemplated preparation of CdS nanoparticles/bacterial cellulose hybrid nanofibers for photocatalysis application.

    Science.gov (United States)

    Yang, Jiazhi; Yu, Junwei; Fan, Jun; Sun, Dongping; Tang, Weihua; Yang, Xuejie

    2011-05-15

    In this work, we describe a novel facile and effective strategy to prepare micrometer-long hybrid nanofibers by deposition of CdS nanoparticles onto the substrate of hydrated bacterial cellulose nanofibers (BCF). Hexagonal phase CdS nanocrystals were achieved via a simple hydrothermal reaction between CdCl(2) and thiourea at relatively low temperature. The prepared pristine BCF and the CdS/BCF hybrid nanofibers were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), UV-vis absorption spectroscopy (UV-vis), and X-ray photoelectron spectroscopy (XPS). The results reveal that the CdS nanoparticles were homogeneously deposited on the BCF surface and stabilized via coordination effect. The CdS/BCF hybrid nanofibers demonstrated high-efficiency photocatalysis with 82% methyl orange (MO) degradation after 90 min irradiation and good recyclability. The results indicate that the CdS/BCF hybrid nanofibers are promising candidate as robust visible light responsive photocatalysts.

  18. Preparation of collagen/hydroxyapatite/alendronate hybrid hydrogels as potential scaffolds for bone regeneration.

    Science.gov (United States)

    Ma, Xin; He, Zhiwei; Han, Fengxuan; Zhong, Zhiyuan; Chen, Liang; Li, Bin

    2016-07-01

    Development of biomimetic scaffolds represents a promising direction in bone tissue engineering. In this study, we designed a two-step process to prepare a type of biomimetic hybrid hydrogels that were composed of collagen, hydroxyapatite (HAP) and alendronate (ALN), an anti-osteoporosis drug. First, water-soluble ALN-conjugated HAP (HAP-ALN) containing 4.0wt.% of ALN was synthesized by treating HAP particles with ALN. Hydrogels were then formed from HAP-ALN conjugate and collagen under physiological conditions using genipin (GNP) as the crosslinker. Depending on the ALN/collagen molar ratio and GNP concentration, the gelation time of hydrogels ranged from 5 to 37min. Notably, these hybrid hydrogels exhibited markedly improved mechanical property (storage modulus G'=38-187kPa), higher gel contents, and lower swelling ratios compared to the hydrogels prepared from collagen alone under similar conditions. Moreover, they showed tunable degradation behaviors against collagenase. The collagen/HAP-ALN hybrid hydrogels supported the adhesion and growth of murine MC3T3-E1 osteoblastic cells well. Such tough yet enzymatically degradable hybrid hydrogels hold potential as scaffolds for bone tissue engineering.

  19. Facile preparation of smooth perovskite films for efficient meso/planar hybrid structured perovskite solar cells.

    Science.gov (United States)

    Zhang, Meng; Yu, Hua; Yun, Jung-Ho; Lyu, Miaoqiang; Wang, Qiong; Wang, Lianzhou

    2015-06-21

    Smooth organolead halide perovskite films for meso/planar hybrid structured perovskite solar cells were prepared by a simple compressed air blow-drying method under ambient conditions. The resultant perovskite films show high surface coverage, leading to a device power conversion efficiency of over 10% with an open circuit voltage up to 1.003 V merely using pristine poly(3-hexylthiophene) (P3HT) as a hole transporter.

  20. Preparation and Characterisation of LiFePO4/CNT Material for Li-Ion Batteries

    Directory of Open Access Journals (Sweden)

    Rushanah Mohamed

    2011-01-01

    Full Text Available Li-ion battery cathode materials were synthesised via a mechanical activation and thermal treatment process and systematically studied. LiFePO4/CNT composite cathode materials were successfully prepared from LiFePO4 material. The synthesis technique involved growth of carbon nanotubes onto the LiFePO4 using a novel spray pyrolysis-modified CVD technique. The technique yielded LiFePO4/CNT composite cathode material displaying good electrochemical activity. The composite cathode exhibited excellent electrochemical performances with 163 mAh/g discharge capacity with 94% cycle efficiency at a 0.1 C discharge rate in the first cycle, with a capacity fade of approximately 10% after 30 cycles. The results indicate that carbon nanotube addition can enable LiFePO4 to display a higher discharge capacity at a fast rate with high efficiency. The research is of potential interest for the application of carbon nanotubes as a new conducting additive in cathode preparation and for the development of high-power Li-ion batteries for hybrid electric vehicles.

  1. Carbon nanotubes, phthalocyanines and porphyrins: attractive hybrid materials for electrocatalysis and electroanalysis.

    Science.gov (United States)

    Zagal, José H; Griveau, Sophie; Ozoemena, Kenneth I; Nyokong, Tebello; Bedioui, Fethi

    2009-04-01

    The manuscript discusses different ways of forming hybrid materials between single (SWCNT) or multi (MWCNT) walled carbon nanotubes and biomimetic compounds such as metalloporphyrins, metallophthalocyanines and other MN4 complexes. The hybrid materials are employed for electrocatalysis of reactions such as oxygen and hydrogen peroxide reduction, nitric oxide oxidation, oxidation of thiols and other pollutants. Methods of characterizing the hybrid materials such as cyclic voltammetry (CV), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electrochemical microscopy (SECM) are discussed.

  2. Reutilization of discarded biomass for preparing functional polymer materials.

    Science.gov (United States)

    Wang, Jianfeng; Qian, Wenzhen; He, Yufeng; Xiong, Yubing; Song, Pengfei; Wang, Rong-Min

    2017-07-01

    Biomass is abundant and recyclable on the earth, which has been assigned numerous roles to human beings. However, over the past decades, accompanying with the rapid expansion of man-made materials, such as alloy, plastic, synthetic rubber and fiber, a great number of natural materials had been neglected and abandoned, such as straw, which cause a waste of resource and environmental pollution. In this review, based on introducing sources of discarded biomass, the main composition and polymer chains in discarded biomass materials, the traditional treatment and novel approach for reutilization of discarded biomass were summarized. The discarded biomass mainly come from plant wastes generated in the process of agriculture and forestry production and manufacturing processes, animal wastes generated in the process of animal husbandry and fishery production as well as the residual wastes produced in the process of food processing and rural living garbage. Compared with the traditional treatment including burning, landfill, feeding and fertilizer, the novel approach for reutilization of discarded biomass principally allotted to energy, ecology and polymer materials. The prepared functional materials covered in composite materials, biopolymer based adsorbent and flocculant, carrier materials, energy materials, smart polymer materials for medical and other intelligent polymer materials, which can effectively serve the environmental management and human life, such as wastewater treatment, catalyst, new energy, tissue engineering, drug controlled release, and coating. To sum up, the renewable and biodegradable discarded biomass resources play a vital role in the sustainable development of human society, as well as will be put more emphases in the future. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Preparation and characterization of trihydroxamic acid functionalized carbon materials for the removal of Cu(II) ions from aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Godino-Salido, M. Luz, E-mail: mlgodino@ujaen.es [Departamento de Química Inorgánica y Orgánica, Facultad de Ciencias Experimentales, Universidad de Jaén, 23071, Jaén (Spain); Santiago-Medina, Antonio; López-Garzón, Rafael; Gutiérrez-Valero, María D.; Arranz-Mascarós, Paloma; López de la Torre, M. Dolores [Departamento de Química Inorgánica y Orgánica, Facultad de Ciencias Experimentales, Universidad de Jaén, 23071, Jaén (Spain); Domingo-García, María; López-Garzón, F. Javier [Departamento de Química Inorgánica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain)

    2016-11-30

    Highlights: • Hybrid materials made by irreversible adsorption of a deferoxamine derivative on ACs. • The surface trihydroxamate groups are the active functions of the hybrid materials. • Great adsorption capacity for Cu(II) of novel trihydroxamic acid functionalized ACs. • Desorption of Cu(II) from the loaded hybrid materials regenerates the parent hybrids. - Abstract: The main objective of this study is to prepare and characterize two functionalizated carbon materials with enhanced adsorptive properties for Cu(II). Thus, two novel hybrid materials have been prepared by a non-covalent functionalization method based on the adsorption of a pyrimidine-desferrioxamine-B conjugate compound (H{sub 4}L) on two activated carbons, ACs (labelled Merck and F). The adsorption of H{sub 4}L on the ACs is pH-dependent and highly irreversible. This is due to strong π-π interactions between the arene centers of the ACs and the pyrimidine moiety of H{sub 4}L. The textural characterization of the AC/H{sub 4}L hybrids shows large decreases of their surface areas. Thus the values of Merck and F are 1031 and 1426 m{sup 2}/g respectively, while these of Merck/H{sub 4}L and F/H{sub 4}L hybrids are 200 and 322 m{sup 2}/g. An important decrease in the micropore volumes is also found, due to the blockage of narrow porosity produced by the adsorption of H{sub 4}L molecules. The ACs/H{sub 4}L hybrids show larger adsorption capacities for Cu(II) (0.105(4) and 0.13(2) mmol/g, at pH 2.0, and 0.20(3) and 0.242(9) mmol/g, at pH 5.5, for Merck/H{sub 4}L and F/H{sub 4}L, respectively) than those of the ACs (0.024(6) and 0.096(9) mmol/g, at pH 2.0, and 0.10(2) and 0.177(8) mmol/g, at pH 5.5, for Merck and F respectively), which is explained on the basis of the complexing ability of the trihydroxamic acid functions. The desorption of Cu(II) from the ACs/H{sub 4}L/Cu(II) materials in acid solution allows the regeneration of most active sites (78.5% in the case of Merck/H{sub 4}L/Cu(II) and 83

  4. Advanced fiber-composite hybrids--A new structural material

    Science.gov (United States)

    Chamis, C. C.; Lark, R. F.; Sullivan, T. L.

    1974-01-01

    Introduction of metal foil as part of matrix and fiber composite, or ""sandwich'', improves strength and stiffness for multidirectional loading, improves resistance to cyclic loading, and improves impact and erosion resistance of resultant fiber-composite hybrid structure.

  5. Microscopic origin of entropy-driven polymorphism in hybrid organic-inorganic perovskite materials

    Science.gov (United States)

    Butler, Keith T.; Svane, Katrine; Kieslich, Gregor; Cheetham, Anthony K.; Walsh, Aron

    2016-11-01

    Entropy is a critical, but often overlooked, factor in determining the relative stabilities of crystal phases. The importance of entropy is most pronounced in softer materials, where small changes in free energy can drive phase transitions, which has recently been demonstrated in the case of organic-inorganic hybrid-formate perovskites. In this Rapid Communication we demonstrate the interplay between composition and crystal structure that is responsible for the particularly pronounced role of entropy in determining polymorphism in hybrid organic-inorganic materials. Using ab initio based lattice dynamics, we probe the origins and effects of vibrational entropy of four archetype perovskite (A B X3 ) structures. We consider an inorganic material (SrTiO3), an A -site hybrid-halide material (CH3NH3) PbI3 , a X -site hybrid material KSr (BH4)3 , and a mixed A - and X -site hybrid-formate material (N2H5) Zn (HCO2)3 , comparing the differences in entropy between two common polymorphs. The results demonstrate the importance of low-frequency intermolecular modes in determining the phase stability in these materials. The understanding gained allows us to propose a general principle for the relative stability of different polymorphs of hybrid materials as temperature is increased.

  6. Hybrid microcircuit technology handbook materials, processes, design, testing and production

    CERN Document Server

    Licari, James J

    1998-01-01

    The Hybrid Microcircuit Technology Handbook integrates the many diverse technologies used in the design, fabrication, assembly, and testing of hybrid segments crucial to the success of producing reliable circuits in high yields. Among these are: resistor trimming, wire bonding, die attachment, cleaning, hermetic sealing, and moisture analysis. In addition to thin films, thick films, and assembly processes, important chapters on substrate selections, handling (including electrostatic discharge), failure analysis, and documentation are included. A comprehensive chapter of design guidelines will

  7. Impact resistance of hybrid composite fan blade materials

    Science.gov (United States)

    Friedrich, L. A.

    1974-01-01

    Improved resistance to foreign object damage was demonstrated for hybrid composite simulated blade specimens. Transply metallic reinforcement offered additional improvement in resistance to gelatin projectile impacts. Metallic leading edge protection permitted equivalent-to-titanium performance of the hybrid composite simulated blade specimen for impacts with 1.27 cm and 2.54 cm (0.50 and 1.00 inch) diameter gelatin spheres.

  8. Preparation and characterization of carbon pillared clay material

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Carbon pillared clay material was prepared from montmorillonite modified by C19H42BrN and C10H16ClN. SEM, FT-IR, XRD, N2 adsorption-desorption, thermal-gravimetric analysis and differential scanning calorimetry were employed to characterize the pore structure and test the effect of surfactant. The results show that organic modifier combines with montmorillonite particles by covalent bond and ion embedded. The microstructure of carbon pillared material looks like needle slice. The most probable pore size distribution is about 1.7 nm. The clay material slice mainly consists of two-dimensional aperture supported by a carbonization pillar. The high-temperature stability of carbon pillared clay is im- proved.

  9. Preparation and characterization of carbon pillared clay material

    Institute of Scientific and Technical Information of China (English)

    ZHANG ZengZhi; YANG ChunWei; NIU JunJie

    2009-01-01

    Carbon pillared clay material was prepared from montmorillonite modified by C19H42BrN and C10H16CIN.SEM, FT-IR, XRD, N2 adsorption-desorption, thermal-gravimetric analysis and differential scanning calorimetry were employed to characterize the pore structure and test the effect of surfactant. The re-sults show that organic modifier combines with montmorillonite particles by covalent bond and ion embedded. The microstructure of carbon pillared material looks like needle slice. The most probable pore size distribution is about 1.7 nm, The clay material slice mainly consists of two-dimensional ap-erture supported by a carbonization pillar. The high-temperature stability of carbon pillared clay is im-proved.

  10. Novel transparent zirconium-based hybrid material with multilayered nanostructures: studies of surface dewettability toward alkane liquids.

    Science.gov (United States)

    Masheder, Benjamin; Urata, Chihiro; Cheng, Dalton F; Hozumi, Atsushi

    2013-01-01

    We have successfully prepared unique inorganic-organic hybrid materials that demonstrate excellent transparency and dewettability toward various alkane liquids (n-hexadecane, n-dodecane and n-decane) without relying on conventional surface roughening and perfluorination. Such coatings were made using a novel family of hybrid materials generated by substituting carboxylic acids, with a range of alkyl chain lengths (CH(3)(CH(2))(x-2)COOH where x = total carbon number, i.e., 10, 12, 14, 16, 18, 22, or 24, into zirconium (Zr) tetra-propoxide complexes. This precursor was then mixed with acetic acid and spincast to produce transparent thin Zr-carboxylic acid (ZrCA(x)) hybrid films using a nonhydrolytic sol-gel process. Fourier transform infrared spectroscopy provided proof of Zr-O-Zr network formation in the films upon casting and also followed changes to the physical nature (liquid-like or solid-like) of the alkyl chain assemblies depending upon alkyl chain length. X-ray diffractometry revealed that the hybrid films prepared using the longer chain carboxylic acids (ZrCA(x≥18)) spontaneously self-assembled into lamella structures with d-spacings ranging from 29.5 to 32.7 Angstroms, depending on the length of the alkyl chain. On the other hand the remaining films (ZrCA(xoleophobicity among the seven hybrid films. In particular, small volume alkane droplets (5 μL) could be easily set in motion to move across and off ZrCA(14) film surfaces without pinning at low tilt angles (~6°).

  11. Material efficient production of complex (hybrid) components using semi solid forming processes

    Science.gov (United States)

    Riedmüller, Kim Rouven; Liewald, Mathias

    2016-10-01

    By means of lightweight design and lightweight material structures, weight of single components and of resulting component assemblies should be reduced and, additionally, existing functionalities, reliabilities and material properties should be preserved. Therefore, on the one hand novel materials and hybrid material combinations are investigated and on the other hand weight reduction is realized by material efficient component designs. With regard to the manufacturing of such complex component geometries with high dimensional accuracy and relating to the realization of hybrid material concepts, semi solid forming technology offers promising prospects. This paper deals with two research projects recently conducted at the Institute for Metal Forming Technology (IFU, University of Stuttgart) in the field of this forming technology. First project is concerned with the manufacturing of hybrid components with integrated sensor and/or actuator functions and second project is in the field of material efficient manufacturing.

  12. Preparation and characterization of titania/silicone nanocomposite material

    Science.gov (United States)

    Shen, Y.; Wang, L.; Zhang, H.; Wu, T.; Pan, H. Y.

    2015-07-01

    The preparation and properties of high refractive index nanocomposite material were studied. The TiO2 nanoparticles were synthesized by sol-gel method using acetic acid as a chelating ligand. The nanoparticles were dispersed directly into the polymer matrix to prepare transparent high refractive index nanocomposite thin films. The refractive index of films will be enhanced with the increase of titania contents. The particles were characterized by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), and Fourier Transform Infrared Spectroscopy (FTIR), respectively. The results showed that all samples with different amounts of TiO2 exhibit good optical transparency. Furthermore, the pattern of the TiO2 NPs shows a pure anatase phases. From TEM image, the TiO2 has little agglomeration. The FT-IR spectrum indicated that acetate ions and titanium ions show good chelation.

  13. Silver vanadium oxide cathode material and method of preparation

    Energy Technology Data Exchange (ETDEWEB)

    Crespi, A.M.

    1993-06-22

    A method for making an electrochemical cell having the steps of admixing silver vanadium oxide with a conductive material and a binder and forming the admixture into a cathode, combining the cathode with a lithium metal anode; and combining an electrolyte with the anode and cathode, the method is described consisting of preparing the silver vanadium oxide by a chemical addition reaction consisting of admixing AgVO[sub 3] and V[sub 2]O[sub 5] in a 2:1 mole ratio heating the admixed AgVO[sub 3] and V[sub 3]O[sub 5] at a reaction temperature in the range of 300 C to 700 C for 5 to 24 hours. An electrochemical cell having a lithium metal anode, cathode and an electrolyte having a metal salt in a nonaqueous solvent comprising: the cathode including a crystalline silver vanadium oxide prepared by a chemical addition reaction.

  14. Industrial Preparation of Bauxite-based Mullite Raw Material

    Institute of Scientific and Technical Information of China (English)

    YANG Zhongzheng; DING Baohua

    2008-01-01

    Bauxite-based mullite grogs were prepared with grade II bauxite(≤3mm)and coal gangue(≤3mm)as starting materials with formula of w(Al2O3)=68%~72%.Mill the mixture to particle size≤0.044mm by wet milling to homogenize chemical composition. After shaping by wet extrusion and drying, the materials were fired at 1550℃, 1600℃ and 1700℃ for 6 hours respectively. After cooling apparent porosity and bulk density of fired materials were tested. The results show as follows: the appropriate sintering temperature for bauxite-based mullite with homogeneous and consistent composition and microstructure and properties is 1600℃,at which the mullite has apparent porosity≤1.5%,bulk density≥2.81g·cm-3and refractoriness under load is 1610-1650℃.Compared with the laboratory results, the sintering temperature is lowered about 100℃,bulk density increased 0.06g?cm-3.The industrial feasibility of preparing bauxite-based mullite grogs with the processing is confirmed.

  15. Hybrid Nonlinear Optical Materials for Applications in Power Limiting and Photorefractive Devices

    Science.gov (United States)

    2010-03-01

    Final 3. DATES COVERED (From - To) 04/01/2007 to 11/30/2009 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER FA9550-07-1-0307 Hybrid Nonlinear Optical Materials for...Hybrid  Nonlinear   Optical   Materials  for Applications in Power  Limiting and Photorefractive devices      Prime Contract: FA95500710307

  16. Synthesis and cation-exchange properties of a bis-zwitterionic lamellar hybrid material

    Energy Technology Data Exchange (ETDEWEB)

    Besson, E. [ICSM Marcoule, UMR 5257, F-30207 Bagnols Sur Ceze, (France); Mehdi, A.; Reye, C.; Corriu, Robert J. P. [Univ Montpellier 2, Inst Charles Gerhardt Montpellier, CNRS-UM2-ENSCM-UM1, UMR 5253, Chim Mol et Org Sol, F-34095 Montpellier 5, (France); Chollet, H. [CEA Valduc, Dept Traitement Mat Nucl, F-21120 Is Sur Tille, (France); Guilard, R. [ICMUB, CNRS, UMR 5260, F-21078 Dijon, (France)

    2008-07-01

    The synthesis of a bis-zwitterionic lamellar hybrid material containing ammonium carboxylate groups is described. Cation-exchange properties of this material towards transition metal and lanthanide ions were studied as well as the regeneration and reuse of the material. (authors)

  17. Preparation, characterization and electrocatalytic properties of poly(luminol) and polyoxometalate hybrid film modified electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Yu-Tsern; Lin, Kuo-Chiang; Chen, Shen-Ming [National Taipei University of Technology, Taipei 106 (Taiwan). Department of Chemical Engineering

    2005-10-20

    Hybrid films composed of poly(luminol) and nanometer-sized clusters of polyoxometalate, SiMo{sub 12}O{sub 40}{sup 4-} and PMo{sub 12}O{sub 40}{sup 3-} have been prepared in acidic aqueous solutions. These films are stable and electrochemically active, and produced on glassy carbon, platinum, gold and transparent semiconductor tin oxide electrodes. The electrochemical quartz crystal microbalance and cyclic voltammetry were used to study in situ growth of the hybrid poly(luminol)/SiMo{sub 12}O{sub 40}{sup 4-} and poly(luminol)/PMo{sub 12}O{sub 40}{sup 3-}. Both the poly(luminol)/SiMo{sub 12}O{sub 40}{sup 4-} and poly(luminol)/PMo{sub 12}O{sub 40}{sup 3-} hybrid films showed four redox couples and the electrochemical properties were compared to SiMo{sub 12}O{sub 40}{sup 4-} and PMo{sub 12}O{sub 40}{sup 3-}. When transferred to various acidity aqueous solutions, the four redox couples and the formal potentials of two hybride film were observed to be pH-dependent. The electrocatalytic reduction of ClO{sub 3}{sup -}, BrO{sub 3}{sup -}, IO{sub 3}{sup -}, S{sub 2}O{sub 8}{sup 2-} and NO{sub 2}{sup -}by a poly(luminol)/PMo{sub 12}O{sub 40}{sup 3-} hybrid film in an acidic aqueous solution showed an electrocatalytic reduction activity of IO{sub 3}{sup -} > BrO{sub 3}{sup -} and ClO{sub 3}{sup -}. The electrocatalytic oxidation of dopamine and epinephrine by a poly(luminol)/PMo{sub 12}O{sub 40}{sup 3-} hybrid film was also investigated. (author)

  18. Preparation and properties of antimony thin film anode materials

    Institute of Scientific and Technical Information of China (English)

    SU Shufa; CAO Gaoshao; ZHAO Xinbing

    2004-01-01

    Metallic antimony thin films were deposited by magnetron sputtering and electrodeposition. Electrochemical properties of the thin film as anode materials for lithium-ion batteries were investigated and compared with those of antimony powder. It was found that both magnetron sputtering and electrodeposition are easily controllable processes to deposit antimony films with fiat charge/discharge potential plateaus. The electrochemical performances of antimony thin films, especially those prepared with magnetron sputtering, are better than those of antimony powder. The reversible capacities of the magnetron sputtered antimony thin film are above 400 mA h g-1 in the first 15 cycles.

  19. Smart designing of new hybrid materials based on brushite-alginate and monetite-alginate microspheres: bio-inspired for sequential nucleation and growth.

    Science.gov (United States)

    Amer, Walid; Abdelouahdi, Karima; Ramananarivo, Hugo Ronald; Fihri, Aziz; El Achaby, Mounir; Zahouily, Mohamed; Barakat, Abdellatif; Djessas, Kamal; Clark, James; Solhy, Abderrahim

    2014-02-01

    In this report new hybrid materials based on brushite-alginate and monetite-alginate were prepared by self-assembling alginate chains and phosphate source ions via a gelation process with calcium ions. The alginate served as nanoreactor for nucleation and growth of brushite or/and monetite due to its gelling and swelling properties. The alginate gel framework, the crystalline phase and morphology of formed hybrid biomaterials were shown to be strongly dependent upon the concentration of the phosphate precursors. These materials were characterized by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDX).

  20. Small organic molecular imprinted materials: their preparation and application.

    Science.gov (United States)

    Jiang, Xiaoman; Jiang, Na; Zhang, Haixia; Liu, Mancang

    2007-09-01

    Molecular imprinting is a technique for preparing polymeric materials that are capable of recognizing and binding the desired molecular target with a high affinity and selectivity. The materials can be applied to a wide range of target molecules, even those for which no natural binder exists or whose antibodies are difficult to raise. The imprinting of small organic molecules (e.g., pharmaceuticals, pesticides, amino acids, steroids, and sugars) is now almost routine. In this review, we pay special attention to the synthesis and application of molecular imprinted polymer (MIPs) imprinted with small organic molecules, including herbicides, pesticides, and drugs. The advantages, applications, and recent developments in small organic molecular imprinted technology are highlighted.

  1. Preparation and Properties of Carbon Fiber Chiral Materials

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ping; HUANG Zhixin; WANG Guoqing

    2008-01-01

    The chiral materials were prepared by using the carbon fiber helices as chiral inclusions,and the composite of Fe3O4 and polyaniline as matrix.The electromagnetic properties,including the rotation angles,the axial ratios and the complex chirality parameters,were measured by using a circular waveguide method in the 8.5-11.0 GHz frequency range.The dependence of these electromagnetic properties on the frequency and the concentration of the Fe3O4 in the composite matrix were analyzed.The results show that an appropriate concentration of Fe3O4 in the matrix is useful in improving the electromagnetic properties of the chiral material.

  2. Physicochemical properties of hybrid graphene-lead sulfide quantum dots prepared by supercritical ethanol

    Science.gov (United States)

    Tavakoli, Mohammad Mahdi; Tayyebi, Ahmad; Simchi, Abdolreza; Aashuri, Hossein; Outokesh, Mohmmad; Fan, Zhiyong

    2015-01-01

    Recently, hybrid graphene-quantum dot systems have attracted increasing attention for the next-generation optoelectronic devices such as ultrafast photo-detectors and solar energy harvesting. In this paper, a novel, one-step, reproducible, and solution-processed method is introduced to prepare hybrid graphene-PbS colloids by employing supercritical ethanol. In the hybrid nanocomposite, PbS quantum dots ( 3 nm) are decorated on the reduced graphene oxide (rGO) nanosheets ( 1 nm thickness and less than 1 micron lengths). By employing X-ray photoelectron and Raman and infrared spectroscopy techniques, it is shown that the rGO nanosheets are bonded to PbS nanocrystals through carboxylic bonds. Passivation of {111} planes of PbS quantum dots with rGO nanosheets is demonstrated by employing density function theory. Quenching of the photoluminescence emission of PbS nanocrystals through coupling with graphene sheets is also shown. In order to illustrate that the developed preparation method does not impair the quantum efficiency of the PbS nanocrystals, the photovoltaic efficiency of solar cell device is reported and compared with oleic acid-capped PbS colloidal quantum dot solar cells. By employing the "Hall effect" measurement, it is shown that the carrier mobility is significantly increased (by two orders of magnitudes) in the presence of graphene nanosheets.

  3. Physicochemical properties of hybrid graphene–lead sulfide quantum dots prepared by supercritical ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Tavakoli, Mohammad Mahdi [Sharif University of Technology, Department of Materials Science and Engineering (Iran, Islamic Republic of); Tayyebi, Ahmad [Sharif University of Technology, Department of Energy (Iran, Islamic Republic of); Simchi, Abdolreza, E-mail: simchi@sharif.edu; Aashuri, Hossein [Sharif University of Technology, Department of Materials Science and Engineering (Iran, Islamic Republic of); Outokesh, Mohmmad [Sharif University of Technology, Department of Energy (Iran, Islamic Republic of); Fan, Zhiyong [Hong Kong University of Science and Technology, Department of Electronic and Computer Engineering (Hong Kong)

    2015-01-15

    Recently, hybrid graphene–quantum dot systems have attracted increasing attention for the next-generation optoelectronic devices such as ultrafast photo-detectors and solar energy harvesting. In this paper, a novel, one-step, reproducible, and solution-processed method is introduced to prepare hybrid graphene–PbS colloids by employing supercritical ethanol. In the hybrid nanocomposite, PbS quantum dots (∼3 nm) are decorated on the reduced graphene oxide (rGO) nanosheets (∼1 nm thickness and less than 1 micron lengths). By employing X-ray photoelectron and Raman and infrared spectroscopy techniques, it is shown that the rGO nanosheets are bonded to PbS nanocrystals through carboxylic bonds. Passivation of {111} planes of PbS quantum dots with rGO nanosheets is demonstrated by employing density function theory. Quenching of the photoluminescence emission of PbS nanocrystals through coupling with graphene sheets is also shown. In order to illustrate that the developed preparation method does not impair the quantum efficiency of the PbS nanocrystals, the photovoltaic efficiency of solar cell device is reported and compared with oleic acid-capped PbS colloidal quantum dot solar cells. By employing the “Hall effect” measurement, it is shown that the carrier mobility is significantly increased (by two orders of magnitudes) in the presence of graphene nanosheets.

  4. Preparation and characterization of ZnO/ZnS hybrid photocatalysts via microwave-hydrothermal method

    Institute of Scientific and Technical Information of China (English)

    Jinglian ZHAO; Liang ZHAO; Xinping WANG

    2008-01-01

    The photocatalytic performance of ZnO/ZnS hybrid nanocomposite was largely higher than that of the mere ZnO or ZnS nanoparticles, but the complicated procedure and misdistribution of final products limited its large-scale productions. The exploration of a novel syn-thesis route of ZnO/ZnS hybrid photocatalysts with high catalytic performance is becoming a crucial step for the large-scale application of ZnO/ZnS hybrid photocatalytic technique. Preparation and characterization of nanosized ZnO/ZnS hybrid photocatalysts were studied in this paper. The photocatalysts were obtained via microwave-hydrothermal crystallization with the help of sodium cit-rate. The products were characterized by X-ray diffrac-tion (XRD), transmission electron microscopy (TEM), particle size distribution (PSD), and Fourier transformed infrared spectroscopy (FT-IR). The results indicated that so-synthesized ZnO/ZnS samples consisted of the high pure cubic (sphalerite) ZnS and hexagonal ZnO nanocrys-tallines with a narrow particle size distribution. The pos-sible formation mechanisms of ZnO/ZnS nanocrystallines were mainly attributed to the superficially protective effect of citrate. The photocatalytic experiments demon-strated that the ZnO/ZnS photocatalysts exhibited a higher catalytic activity for the degradation of acid fuchs-ine than other monocomponents.

  5. Preparation and antibacterial properties of hybrid-zirconia films with silver nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Azocar, Ignacio, E-mail: manuel.azocar@usach.cl [Departamento de Quimica de los Materiales, Facultad de Quimica y Biologia, Universidad de Santiago de Chile, USACH, Avenida Bernardo O' Higgins 3363, Casilla 40, Correo 33, Santiago (Chile); Vargas, Esteban [Facultad de Ingenieria, Departamento de Metalurgia, Universidad de Santiago de Chile, USACH (Chile); Duran, Nicole [Departamento de Quimica de los Materiales, Facultad de Quimica y Biologia, Universidad de Santiago de Chile, USACH, Avenida Bernardo O' Higgins 3363, Casilla 40, Correo 33, Santiago (Chile); Arrieta, Abel [Departamento de Biologia, Facultad de Quimica y Biologia, Universidad de Santiago de Chile, USACH (Chile); Gonzalez, Evelyn [Departamento de Quimica de los Materiales, Facultad de Quimica y Biologia, Universidad de Santiago de Chile, USACH, Avenida Bernardo O' Higgins 3363, Casilla 40, Correo 33, Santiago (Chile); Facultad de Ingenieria, Departamento de Metalurgia, Universidad de Santiago de Chile, USACH (Chile); Departamento de Biologia, Facultad de Quimica y Biologia, Universidad de Santiago de Chile, USACH (Chile); Departamento de Quimica Farmacologica y Toxicologica, Facultad de Ciencias Quimicas, Universidad de Chile, Sergio Livingstone Polhammer 1007, Santiago (Chile); and others

    2012-11-15

    The antimicrobial effect of incorporating silver nanoparticles (AgNps) into zirconia matrix-polyether glycol was studied. AgNps of 4-6 nm in size were synthesized using the inverse micelles method, and different doses of metallic nanoparticles were incorporated into zirconia-polyether glycol mixtures during the ageing procedure. Atomic force microscopy (AFM) of the modified hybrid film showed a homogenous distribution of 20-80 nm diameter AgNps, indicating agglomeration of these structures during film modification; such agglomerations were greater when increasing the dosage of the colloidal system. The AgNps-hybrid films showed higher antimicrobial activity against Gram-positive bacteria than for Gram-negative bacteria. Hybrid films prepared with dioctyl sodium sulfosuccinate (AOT) stabilized AgNps presented enhanced antibacterial activity compared to that obtained through the addition of a high AgNO{sub 3} concentration (0.3 wt%). -- Graphical abstract: Atomic Force Micrographs, top and cross section view, showing silver nanoparticles embedded in a zirconia-polyether glycol hybrid film. Highlights: Black-Right-Pointing-Pointer Antibacterial activity of films (zirconia-polyether glycol) modified with silver nanoparticles. Black-Right-Pointing-Pointer Biofilm formation is prevented. Black-Right-Pointing-Pointer High sensibility against gram positive bacteria.

  6. Sample preparation and in situ hybridization techniques for automated molecular cytogenetic analysis of white blood cells

    Energy Technology Data Exchange (ETDEWEB)

    Rijke, F.M. van de; Vrolijk, H.; Sloos, W. [Leiden Univ. (Netherlands)] [and others

    1996-06-01

    With the advent in situ hybridization techniques for the analysis of chromosome copy number or structure in interphase cells, the diagnostic and prognostic potential of cytogenetics has been augmented considerably. In theory, the strategies for detection of cytogenetically aberrant cells by in situ hybridization are simple and straightforward. In practice, however, they are fallible, because false classification of hybridization spot number or patterns occurs. When a decision has to be made on molecular cytogenetic normalcy or abnormalcy of a cell sample, the problem of false classification becomes particularly prominent if the fraction of aberrant cells is relatively small. In such mosaic situations, often > 200 cells have to be evaluated to reach a statistical sound figure. The manual enumeration of in situ hybridization spots in many cells in many patient samples is tedious. Assistance in the evaluation process by automation of microscope functions and image analysis techniques is, therefore, strongly indicated. Next to research and development of microscope hardware, camera technology, and image analysis, the optimization of the specimen for the (semi)automated microscopic analysis is essential, since factors such as cell density, thickness, and overlap have dramatic influences on the speed and complexity of the analysis process. Here we describe experiments that have led to a protocol for blood cell specimen that results in microscope preparations that are well suited for automated molecular cytogenetic analysis. 13 refs., 4 figs., 1 tab.

  7. Method for isolating chromosomal DNA in preparation for hybridization in suspension

    Science.gov (United States)

    Lucas, Joe N.

    2000-01-01

    A method is provided for detecting nucleic acid sequence aberrations using two immobilization steps. According to the method, a nucleic acid sequence aberration is detected by detecting nucleic acid sequences having both a first nucleic acid sequence type (e.g., from a first chromosome) and a second nucleic acid sequence type (e.g., from a second chromosome), the presence of the first and the second nucleic acid sequence type on the same nucleic acid sequence indicating the presence of a nucleic acid sequence aberration. In the method, immobilization of a first hybridization probe is used to isolate a first set of nucleic acids in the sample which contain the first nucleic acid sequence type. Immobilization of a second hybridization probe is then used to isolate a second set of nucleic acids from within the first set of nucleic acids which contain the second nucleic acid sequence type. The second set of nucleic acids are then detected, their presence indicating the presence of a nucleic acid sequence aberration. Chromosomal DNA in a sample containing cell debris is prepared for hybridization in suspension by treating the mixture with RNase. The treated DNA can also be fixed prior to hybridization.

  8. Preparation of course materials: Elementary mathematics of powered flight

    Science.gov (United States)

    Rublein, George T.

    1994-01-01

    Non-science students at William and Mary will soon be required to take a mathematics course in order to earn a bachelor's degree. A standard menu of technique courses is the usual way in which universities provide for this requirement: Trigonometry, probability, geometry for teachers, and the like. In this work, we attempt to break away from these largely unsuccessful choices. Our intent is to prepare material that sets a variety of simple mathematical procedures in the context of a commonly experienced part of students' lives: riding in commercial airplanes. The work, begun last summer at Langley, is now close to completion and trial in upcoming fall term at William and Mary. As of this writing, the narrative is complete for 12 to 14 projected sections. We have prepared material on wind triangles, wind roses, navigation maps, drag induced loss of velocity for unpowered missiles (tennis balls), luggage and its effect on center of gravity, localized magnetic declination and VOR orientation, geometry of great circles, terminal velocity for falling bodies, pressure vessels: tires and balloons and blimps, global structure of declination lines, map projections (mercator, azimuthal equidistant, Lambert), ears and their reaction to altitude change. The next section will treat lift, drag and thrust. The last will treat control surfaces. The entire approach avoids any effort to investigate mathematical topics that arise in the solution of problems. And by the same token, we avoid any organized attempt to explain aeronautical engineering, even on an elementary level. We look only at enough mathematics to do a problem and we select only engineering topics that permit some kind of (elementary) mathematical analysis. In the end, we will think of the material as successful if two things happen: Students must come away with some confidence that even lay people can quantify parts of their surroundings. Other potential instructors must be willing to gain enough familiarity with the

  9. Transuranic Hybrid Materials: Crystallographic and Computational Metrics of Supramolecular Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Surbella, Robert G. [Department; Ducati, Lucas C. [Department; Pellegrini, Kristi L. [Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, Washington 99354, United States; McNamara, Bruce K. [Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, Washington 99354, United States; Autschbach, Jochen [Department; Schwantes, Jon M. [Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, Washington 99354, United States; Cahill, Christopher L. [Department

    2017-07-26

    A family of twelve supramolecular [AnO2Cl4]2- (An = U, Np, Pu) containing compounds assembled via hydrogen and halogen bonds donated by substituted 4-X-pyridinium cations (X = H, Cl, Br, I) is reported. These materials were prepared from a room-temperature synthesis wherein crystallization of unhydrolyzed and valence pure [An(VI)O2Cl4]2- (An = U, Np, Pu) tectons are the norm. We present a hierarchy of assembly criteria based on crystallographic observations, and subsequently quantify the strengths of the non-covalent interactions using Kohn-Sham density functional calculations. We provide, for the first time, a detailed description of the electrostatic potentials (ESPs) of the actinyl tetrahalide dianions and reconcile crystallographically observed structural motifs and non-covalent interaction (NCI) acceptor-donor pairings. Our findings indicate that the average electrostatic potential across the halogen ligands (the acceptors) changes by only ~2 kJ mol-1 across the AnO22+ series, indicating the magnitude of the potential is independent of the metal center. The role of the cation is therefore critical in directing structural motifs and dictating the resulting hydrogen and halogen bond strengths, the former being stronger due to the positive charge centralized on the pyridyl nitrogen N-H+. Subsequent analyses using the Quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) approaches support this conclusion and highlight the structure directing role of the cations. Whereas one can infer that the 2 Columbic attraction is the driver for assembly, the contribution of the non-covalent interaction is to direct the molecular-level arrangement (or disposition) of the tectons.

  10. Preparation of Reduced Graphene Oxides as Electrode Materials for Supercapacitors

    KAUST Repository

    Bai, Yaocai

    2012-06-01

    Reduced graphene oxide as outstanding candidate electrode material for supercapacitor has been investigated. This thesis includes two topics. One is that three kinds of reduced graphene oxides were prepared by hydrothermal reduction under different pH conditions. The pH values were found to have great influence on the reduction of graphene oxides. Acidic and neutral media yielded reduced graphene oxides with more oxygen-functional groups, lower specific surface areas but broader pore size distributions than those in basic medium. Variations induced by the pH changes resulted in great differences in the supercapacitor performance. The graphene produced in the basic solution presented mainly electric double layer behavior with specific capacitance of 185 F/g, while the other two showed additional pseudocapacitance behavior with specific capacitance of 225 F/g (acidic) and 230 F/g (neutral), all at a constant current density of 1A/g. The other one is that different reduced graphene oxides were prepared via solution based hydrazine reduction, low temperature thermal reduction, and hydrothermal reduction. The as- prepared samples were then investigated by UV-vis spectroscopy, X-ray diffraction, Raman spectroscopy, and Scanning electron microscope. The supercapacitor performances were also studied and the hydrothermally reduced graphene oxide exhibited the highest specific capacitance.

  11. Magnetically Separable Fe3O4/AgBr Hybrid Materials: Highly Efficient Photocatalytic Activity and Good Stability

    Science.gov (United States)

    Cao, Yuhui; Li, Chen; Li, Junli; Li, Qiuye; Yang, Jianjun

    2015-06-01

    Magnetically separable Fe3O4/AgBr hybrid materials with highly efficient photocatalytic activity were prepared by the precipitation method. All of them exhibited much higher photocatalytic activity than the pure AgBr in photodegradation of methyl orange (MO) under visible light irradiation. When the loading amount of Fe3O4 was 0.5 %, the hybrid materials displayed the highest photocatalytic activity, and the degradation yield of MO reached 85 % within 12 min. Silver halide often suffers serious photo-corrosion, while the stability of the Fe3O4/AgBr hybrid materials improved apparently than the pure AgBr. Furthermore, depositing Fe3O4 onto the surface of AgBr could facilitate the electron transfer and thereby leading to the elevated photocatalytic activity. The morphology, phase structure, and optical properties of the composites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-visible diffuse reflectance spectra (UV-vis DRS), and photoluminescence (PL) techniques.

  12. Porous Materials from Thermally Activated Kaolinite: Preparation, Characterization and Application

    Directory of Open Access Journals (Sweden)

    Jun Luo

    2017-06-01

    Full Text Available In the present study, porous alumina/silica materials were prepared by selective leaching of silicon/aluminum constituents from thermal-activated kaolinite in inorganic acid or alkali liquor. The correlations between the characteristics of the prepared porous materials and the dissolution properties of activated kaolinite were also investigated. The results show that the specific surface area (SSA of porous alumina/silica increases with silica/alumina dissolution, but without marked change of the BJH pore size. Furthermore, change in pore volume is more dependent on activation temperature. The porous alumina and silica obtained from alkali leaching of kaolinite activated at 1150 °C for 15 min and acid leaching of kaolinite activated at 850 °C for 15 min are mesoporous, with SSAs, BJH pore sizes and pore volumes of 55.8 m2/g and 280.3 m2/g, 6.06 nm and 3.06 nm, 0.1455 mL/g and 0.1945 mL/g, respectively. According to the adsorption tests, porous alumina has superior adsorption capacities for Cu2+, Pb2+ and Cd2+ compared with porous silica and activated carbon. The maximum capacities of porous alumina for Cu2+, Pb2+ and Cd2+ are 134 mg/g, 183 mg/g and 195 mg/g, respectively, at 30 °C.

  13. Fabrication of nanoscale to macroscale nickel-multiwall carbon nanotube hybrid materials with tunable material properties

    Science.gov (United States)

    Abdalla, Ahmed M.; Majdi, Tahereh; Ghosh, Suvojit; Puri, Ishwar K.

    2016-12-01

    To utilize their superior properties, multiwall carbon nanotubes (MWNTs) must be manipulated and aligned end-to-end. We describe a nondestructive method to magnetize MWNTs and provide a means to remotely manipulate them through the electroless deposition of magnetic nickel nanoparticles on their surfaces. The noncovalent bonds between Ni nanoparticles and MWNTs produce a Ni-MWNT hybrid material (NiCH) that is electrically conductive and has an enhanced magnetic susceptibility and elastic modulus. Our experiments show that MWNTs can be plated with Ni for Ni:MWNT weight ratios of γ = 1, 7, 14 and 30, to control the material properties. The phase, atom-level, and morphological information from x-ray diffraction, energy dispersive x-ray spectroscopy, scanning electron microscopy, transmission electron microscopy, dark field STEM, and atomic force microscopy clarify the plating process and reveal the mechanical properties of the synthesized material. Ni metalizes at the surface of the Pd catalyst, forming a continuous wavy layer that encapsulates the MWNT surfaces. Subsequently, Ni acts as an autocatalyst, allowing the plating to continue even after the original Pd catalyst has been completely covered. Raising γ increases the coating layer thickness from 10 to 150 nm, which influences the NiCH magnetic properties and tunes its elastic modulus from 12.5 to 58.7 GPa. The NiCH was used to fabricate Ni-MWNT macrostructures and tune their morphologies by changing the direction of an applied magnetic field. Leveraging the hydrophilic Ni-MWNT outer surface, a water-based conductive ink was created and used to print a conductive path that had an electrical resistivity of 5.9 Ω m, illustrating the potential of this material for printing electronic circuits.

  14. Energy storage in hybrid organic-inorganic materials hexacyanoferrate-doped polypyrrole as cathode in reversible lithium cells

    DEFF Research Database (Denmark)

    Torres-Gomez, G,; Skaarup, Steen; West, Keld

    2000-01-01

    A study of the hybrid oganic-inorganic hexacyanoferrate-polypyrrole material as a cathode in rechargeable lithium cells is reported as part of a series of functional hybrid materials that represent a new concept in energy storage. The effect of synthesis temperatures of the hybrid in the specific...

  15. α MnMoO₄/graphene hybrid composite: high energy density supercapacitor electrode material.

    Science.gov (United States)

    Ghosh, Debasis; Giri, Soumen; Moniruzzaman, Md; Basu, Tanya; Mandal, Manas; Das, Chapal Kumar

    2014-07-28

    A unique and cost effective hydrothermal procedure has been carried out for the synthesis of hexahedron shaped α MnMoO4 and its hybrid composite with graphene using three different weight percentages of graphene. Characterization techniques, such as XRD, Raman and FTIR analysis, established the phase and formation of the composite. The electrochemical characterization of the pseudocapacitive MnMoO4 and the MnMoO4/graphene composites in 1 M Na2SO4 displayed highest specific capacitances of 234 F g(-1) and 364 F g(-1), respectively at a current density of 2 A g(-1). Unlike many other pseudocapacitive electrode materials our prepared materials responded in a wide range of working potentials of (-)1 V to (+)1 V, which indeed resulted in a high energy density without substantial loss of power density. The highest energy densities of 130 Wh kg(-1) and 202.2 Wh kg(-1) were achieved, respectively for the MnMoO4 and the MnMoO4/graphene composite at a constant power delivery rate of 2000 W kg(-1). The synergistic effect of the graphene with the pseudocapacitive MnMoO4 caused an increased cycle stability of 88% specific capacitance retention after 1000 consecutive charge discharge cycles at 8 A g(-1) constant current density, which was higher than the virgin MnMoO4 with 84% specific capacitance retention.

  16. Fabrication and materials properties of high-density polyethylene (HDPE)/biphasic calcium phosphate (BCP) hybrid bone plates

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Sun Young; Youn, Min Ho; Lim, Youn Mook; Gwon, Hui Jeong; Park, Jong Seok; Nho, Young Chang [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2010-06-15

    Biphasic calcium phosphate-reinforced high-density polyethylene (BCP/HDPE) hybrid composite is a new orthopedic biomaterial, which was made to simulate a natural bone composition. Calcium phosphate systems and HDPE hybrid composites have been used in biomedical applications without any inflammatory response. Differences in natural bone of both materials have motivated the use of coupling agents to improve their interfacial interfacial interactions. The composites were prepared using medical grade BCP powder and granular polyethylene. This material was produced by replacing the mineral component and collagen soft tissue of the bone with BCP and HDPE, respectively. As expected, increased volume fraction of either reinforcement type over 0 {approx} 50 vol.% resulted in a increased Vickers hardness and Young's modulus. Thus, BCP particle-reinforced HDPE composites possessed improved material and mechanical properties. BCP particles-reinforced composites were anisotropic due to an alignment of the particles in the matrix during a processing. On the other hand, bending and tensile strength was dramatically changed in the matrix. To change the material and mechanical properties of HDPE/BCP composites, the process of a blending was used, and its effect on the microstructure and mechanical proprieties of HDPE/BCP composites were investigated by means of FT-IR/ATR spectroscopy, XRD, FE-SEM, Vickers Hardness Testing Machine, Universal Testing Machine, Mercury Porosimeter and Ultrasonic Flaw Detector at room temperature. For the evaluation of the cell viability and proliferation onto the external surface of HDPE/BCP hybrid plates with a HaCaT cell line, which is a multipotent cell line able to differentiate towards different phenotypes under the action of biological factors, has been evaluated with in vitro studies and quantified by colormetric assays. These findings indicate that the HDPE/BCP hybrid plates are biocompatible and non-toxic.

  17. Facile scalable synthesis of Co{sub 3}O{sub 4}/carbon nanotube hybrids as superior anode materials for lithium-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Zhiguo; Xu, Weiwei [Key Lab of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, and the College of Chemistry and Materials Science, Northwest University, Xi’an 710069 (China); Huang, Tao [Department of Chemistry, Fudan University, Shanghai 210024 (China); Li, Maolin; Wang, Wanren; Liu, Yanping; Mao, Chaochao; Meng, Fanli; Wang, Mengjiao [Key Lab of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, and the College of Chemistry and Materials Science, Northwest University, Xi’an 710069 (China); Cheng, Minghai [Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (China); Yu, Aishui [Department of Chemistry, Fudan University, Shanghai 210024 (China); Guo, Xiaohui, E-mail: guoxh2009@nwu.edu.cn [Key Lab of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, and the College of Chemistry and Materials Science, Northwest University, Xi’an 710069 (China)

    2013-10-15

    Graphical abstract: Co{sub 3}O{sub 4}/MWCNT hybrids were synthesized via strong ultra-sonication assisted shaking processes. The resultant samples as anode electrode display enhanced cycling performance and rate capability compared with pure Co{sub 3}O{sub 4} particle. - Highlights: • Co{sub 3}O{sub 4}/MWCNT hybrids were synthesized via ultra-sonication assisted shaking process. • The resulting Co{sub 3}O{sub 4} nanoparticles are highly dispersed onto MWCNT network backbone. • Co{sub 3}O{sub 4}/MWCNT hybrid displays highly enhanced lithium storage properties. • The present synthetic approach is facile, controllable, and scalable. - Abstract: In this report, Co{sub 3}O{sub 4}/multiple-wall carbon nanotube (MWCNT) hybrid materials were synthesized via strong ultrasonication-assisted shaking and magnetic stirring processes. The prepared samples were well characterized by utilizing powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy techniques. Results indicated that the resulting Co{sub 3}O{sub 4} nanoparticles were highly dispersed in the MWCNT network backbone and further form Co{sub 3}O{sub 4}/MWCNT hybrid materials. The obtained Co{sub 3}O{sub 4}/MWCNT hybrids can be employed as anode electrode in Lithium-ion batteries and deliver as high as discharge capacity of 1250 mA h g{sup −1} at a current density of 0.2 C, additionally, 81% of the discharge capacity for sample 2 with 20 wt.% MWCNT loading could be retained after 70 cycles, which could be associated with the specific hybrid structure of the electrode as well as the addition of MWCNT. Most importantly, the present synthetic approach is facile, controllable, and scalable, which allowing it more easily adapted to prepare other hybrid materials with specific architectures.

  18. One-pot preparation of Ni-graphene hybrids with enhanced catalytic performance

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Guiqiang, E-mail: chengphnu@126.com [College of Information Science and Engineering, Hebei North University, Zhangjiakou 075000, Hebei (China); Wang, Fengli [College of Information Science and Engineering, Hebei North University, Zhangjiakou 075000, Hebei (China); Liu, Fei [Department of Electrical Engineering, Zhangjiakou Vocational College of Technology, Zhangjiakou 075000, Hebei (China); Zhang, Xiao, E-mail: Zhangxiao83690@163.com [College of Information Science and Engineering, Hebei North University, Zhangjiakou 075000, Hebei (China)

    2014-10-15

    Highlights: • Ni-rGO hybrids were synthesized by a microwave-assisted method. • NaBH4 was used as a reducing agent to fabricate Ni-rGO hybrids. • Ni-rGO was used as catalyst for the reduction of p-nitrophenol. • Ni-rGO showed higher catalytic ability than pure Ni nanoparticles. • Ni-rGO showed good recyclability and stability. - Abstract: A facile one-pot method was developed to synthesize magnetic nickel nanoparticles (Ni NPs) decorated on reduced graphene oxide (rGO) with NaHB{sub 4} as a reductant under microwave irradiation. The morphologies and structures of the Ni-rGO hybrids were investigated by electron microscopy, thermal gravimetric analysis, X-ray photoelectron spectroscopy, X-ray diffraction, Raman spectroscopy and magnetic measurements. The results showed that Ni-rGO hybrids composed of the well-dispersed Ni NPs with an average diameter of 12 nm were successfully prepared. To demonstrate one potential application, the catalytic ability of Ni-rGO was evaluated and it was found that Ni-rGO showed much enhanced catalytic ability, good recyclability and stability toward the catalytic reduction of p-nitrophenol to p-aminophenol. The excellent catalytic activity of Ni-rGO hybrids was due possibly to the synergistic effect of Ni NPs and rGO, including the uniform distribution of Ni NPs onto rGO, enhanced electrons separation and transport, as well as the fast adsorption of p-nitrophenol by rGO.

  19. Biomimetic synthesis and characterization of semiconducting hybrid organic–inorganic composite materials based on polyaniline–polyethylene glycol–CdS system

    Indian Academy of Sciences (India)

    A Singh; N P Singh; R A Singh

    2011-07-01

    Triple hybrid materials based on polyaniline-polyethylene glycol and cadmium sulphide have been prepared by the duffusion–limited biomimetic route and characterized by a number of spectroscopic, XRD, SEM, thermal and electrical measurements. These hybrid materials have been prepared by controlled precipitation of cadmium sulphide by passing H2S gas and mixing the resultant colloid with the acidic solution of aniline. in situ polymerization of adsorbed anilinium ions on anionic surface of CdS resulted in hybrids. Water–soluble polyethylene glycol led to diffusion–limited growth of polyaniline and CdS resulting in a nanosized hybrid material as indicated by UV-visible spectra, X-ray diffraction (XRD) and scanning electron microscopy (SEM). AC impedance spectroscopic studies on binary and ternary nanocomposites of polyaniline with polyethylene glycol and cadmium sulphide separately and triple hybrid system have been reported. Equivalent circuits were determined and discussed in the light of contributions made from different sources such as grain, grain boundary and electrode.

  20. Iodine Standard Materials: Preparation and Inter-Laboratory Comparisons

    Energy Technology Data Exchange (ETDEWEB)

    D D Jenson; M L Adamic; J E Olson; M G Watrous; C Vockenhuber

    2014-08-01

    The Idaho National Laboratory is preparing to enter the community of AMS practioners who analyze for 129Iodine. We expect to take delivery of a 0.5 MV compact accelerator mass spectrometry system, built by NEC, in the early summer of 2014. The primary mission for this instrument is iodine; it is designed to analyze iodine in the +3 charge state. As part of the acceptance testing for this instrument, both at NEC and on-site in our laboratory, some sort of standard or reference material is needed to verify performance. Appropriate standard materials are not readily available in the commercial marketplace. Small quantities can sometimes be acquired from other laboratories already engaged in iodine analyses. In the longer-term, meaningful quantities of standard materials are needed for routine use in analyses, and for quality control functions1. We have prepared some standard materials, starting with elemental Woodward iodine and NIST SRM 3231 [Iodine-129 Isotopic Standard (high level)] 10-6 solution. The goal was to make mixtures at the 5x10-10, 5x10-11, 5x10-12 ratio levels, along with some unmodified Woodward, in the chemical form of silver iodide. Approximately twenty grams of each of these mixtures were prepared. The elemental Woodward iodine was dissolved in chloroform, then reduced to iodide using sodium bisulfite in water. At this point the NIST spike material was added, in the form of sodium iodide. The mixed iodides were oxidized back to iodine in chloroform using hydrogen peroxide. This oxidation step was essential for isotopic equilibration of the 127 and 129 atoms. The iodine was reduced to iodide using sodium bisulfite as before. Excess sulfites and sulfates were precipitated with barium nitrate. After decanting, silver nitrate was used to precipitate the desired silver iodide. Once the silver iodide was produced, the material was kept in darkness as much as possible to minimize photo-oxidation. The various mixtures were synthesized independently of each

  1. Electrochemical characterization of MnO2 as the cathode material for a high voltage hybrid capacitor

    Institute of Scientific and Technical Information of China (English)

    Jian-ling Li; Fei Gao; Yan Jing; Rui-ying Miao; Ke-zhong Wu; Xin-dong Wang

    2009-01-01

    Manganese dioxide (MnO_2) was prepared using the ultrasonic method. Its electrochemical performance was evaluated as the cathode material for a high voltage hybrid capacitor. And the specific capacitance of the MnO_2 electrode reached 240 F-g-1. The new hybrid capacitor was constructed, combining Al/Al_2O_3 as the anode and MnO_2 as the cathode with electrolyte for the aluminum electrolytic capacitor to solve the problem of low working voltage of a supercapacitor unit. The results showed that the hybrid ca-pacitor had a high energy density and the ability of quick charging and discharging according to the electrochemical performance test. The capacitance was 84.4 μF, and the volume and mass energy densities were greatly improved compared to those of the traditional aluminum electrolytic capacitor of 47 μF. The analysis of electrochemical impedance spectroscopy (EIS) showed that the hybrid ca-pacitor had good impedance characteristics.

  2. PREPARATION AND PROPERTIES OF SPAES-TiO_2 HYBRID MEMBRANES FOR DIRECT METHANOL FUEL CELL

    Institute of Scientific and Technical Information of China (English)

    刘惠玲

    2009-01-01

    Sulfonated poly(arylene ether sulfone)(SPAES) copolymer with degree of sulfonation of 1.0 was synthesized and characterized.A series of SPAES-TiO_2 hybrid membranes with various contents of nano-sized TiO_2 particles were prepared and characterized through sol-gel reactions.Scanning electron microscopy(SEM) images indicated the TiO_2 particles were well dispersed within polymer matrix.These composite membranes were evaluated for proton exchange membranes(PEMs) in direct methanol fuel cell(DMFC).These mem...

  3. From the Solution Processing of Hydrophilic Molecules to Polymer-Phthalocyanine Hybrid Materials for Ammonia Sensing in High Humidity Atmospheres

    Science.gov (United States)

    Gaudillat, Pierre; Jurin, Florian; Lakard, Boris; Buron, Cédric; Suisse, Jean-Moïse; Bouvet, Marcel

    2014-01-01

    We have prepared different hybrid polymer-phthalocyanine materials by solution processing, starting from two sulfonated phthalocyanines, s-CoPc and CuTsPc, and polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), poly(acrylic acid-co-acrylamide) (PAA-AM), poly(diallyldimethylammonium chloride) (PDDA) and polyaniline (PANI) as polymers. We also studied the response to ammonia (NH3) of resistors prepared from these sensing materials. The solvent casted films, prepared from s-CoPc and PVP, PEG and PAA-AM, were highly insulating and very sensitive to the relative humidity (RH) variation. The incorporation of s-CoPc in PDDA by means of layer-by-layer (LBL) technique allowed to stabilize the film, but was too insulating to be interesting. We also prepared PANI-CuTsPc hybrid films by LBL technique. It allowed a regular deposition as evidenced by the linear increase of the absorbance at 688 nm as a function of the number of bilayers. The sensitivity to ammonia (NH3) of PANi-CuTsPc resistors was very high compared to that of individual materials, giving up to 80% of current decrease when exposed to 30 ppm NH3. Contrarily to what happens with neutral polymers, in PANI, CuTsPc was stabilized by strong electrostatic interactions, leading to a stable response to NH3, whatever the relative humidity in the range 10%–70%. Thus, the synergy of PANI with ionic macrocycles used as counteranions combined with their simple aqueous solution processing opens the way to the development of new gas sensors capable of operating in real world conditions. PMID:25061841

  4. From the solution processing of hydrophilic molecules to polymer-phthalocyanine hybrid materials for ammonia sensing in high humidity atmospheres.

    Science.gov (United States)

    Gaudillat, Pierre; Jurin, Florian; Lakard, Boris; Buron, Cédric; Suisse, Jean-Moïse; Bouvet, Marcel

    2014-07-24

    We have prepared different hybrid polymer-phthalocyanine materials by solution processing, starting from two sulfonated phthalocyanines, s-CoPc and CuTsPc, and polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), poly(acrylic acid-co-acrylamide) (PAA-AM), poly(diallyldimethylammonium chloride) (PDDA) and polyaniline (PANI) as polymers. We also studied the response to ammonia (NH3) of resistors prepared from these sensing materials. The solvent casted films, prepared from s-CoPc and PVP, PEG and PAA-AM, were highly insulating and very sensitive to the relative humidity (RH) variation. The incorporation of s-CoPc in PDDA by means of layer-by-layer (LBL) technique allowed to stabilize the film, but was too insulating to be interesting. We also prepared PANI-CuTsPc hybrid films by LBL technique. It allowed a regular deposition as evidenced by the linear increase of the absorbance at 688 nm as a function of the number of bilayers. The sensitivity to ammonia (NH3) of PANi-CuTsPc resistors was very high compared to that of individual materials, giving up to 80% of current decrease when exposed to 30 ppm NH3. Contrarily to what happens with neutral polymers, in PANI, CuTsPc was stabilized by strong electrostatic interactions, leading to a stable response to NH3, whatever the relative humidity in the range 10%-70%. Thus, the synergy of PANI with ionic macrocycles used as counteranions combined with their simple aqueous solution processing opens the way to the development of new gas sensors capable of operating in real world conditions.

  5. From the Solution Processing of Hydrophilic Molecules to Polymer-Phthalocyanine Hybrid Materials for Ammonia Sensing in High Humidity Atmospheres

    Directory of Open Access Journals (Sweden)

    Pierre Gaudillat

    2014-07-01

    Full Text Available We have prepared different hybrid polymer-phthalocyanine materials by solution processing, starting from two sulfonated phthalocyanines, s-CoPc and CuTsPc, and polyvinylpyrrolidone (PVP, polyethylene glycol (PEG, poly(acrylic acid-co-acrylamide (PAA-AM, poly(diallyldimethylammonium chloride (PDDA and polyaniline (PANI as polymers. We also studied the response to ammonia (NH3 of resistors prepared from these sensing materials. The solvent casted films, prepared from s-CoPc and PVP, PEG and PAA-AM, were highly insulating and very sensitive to the relative humidity (RH variation. The incorporation of s-CoPc in PDDA by means of layer-by-layer (LBL technique allowed to stabilize the film, but was too insulating to be interesting. We also prepared PANI-CuTsPc hybrid films by LBL technique. It allowed a regular deposition as evidenced by the linear increase of the absorbance at 688 nm as a function of the number of bilayers. The sensitivity to ammonia (NH3 of PANi-CuTsPc resistors was very high compared to that of individual materials, giving up to 80% of current decrease when exposed to 30 ppm NH3. Contrarily to what happens with neutral polymers, in PANI, CuTsPc was stabilized by strong electrostatic interactions, leading to a stable response to NH3, whatever the relative humidity in the range 10%–70%. Thus, the synergy of PANI with ionic macrocycles used as counteranions combined with their simple aqueous solution processing opens the way to the development of new gas sensors capable of operating in real world conditions.

  6. SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS

    Institute of Scientific and Technical Information of China (English)

    Jie-bin Pang; Kun-yuan Qiu; Yen Wei

    2000-01-01

    Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymer in the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template or pore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder Xray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m2/g) and pore volumes (e.g. 0.6 cm3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, pore volumes and pore diameters of the hybrid materials increase.

  7. Nanoscale Structure of Self-Assembling Hybrid Materials of Inorganic and Electronically Active Organic Phases

    Energy Technology Data Exchange (ETDEWEB)

    Sofos, M.; Goswami, D.A. Stone D.K.; Okasinski, J.S.; Jin, H.; Bedzyk, M.J.; Stupp, S.I. (NWU)

    2008-10-06

    Hybrid materials with nanoscale structure that incorporates inorganic and organic phases with electronic properties offer potential in an extensive functional space that includes photovoltaics, light emission, and sensing. This work describes the nanoscale structure of model hybrid materials with phases of silica and electronically active bola-amphiphile assemblies containing either oligo(p-phenylene vinylene) or oligo(thiophene) segments. The hybrid materials studied here were synthesized by evaporation-induced self-assembly and characterized by X-ray scattering techniques. Grazing-incidence X-ray scattering studies of these materials revealed the formation of two-dimensional hexagonally packed cylindrical micelles of the organic molecules with diameters between 3.1 and 3.6 nm and cylindrical axes parallel to the surface. During the self-assembly process at low pH, the cylindrical aggregates of conjugated molecules become surrounded by silica giving rise to a hybrid structure with long-range order. Specular X-ray reflectivity confirmed the long-range periodicity of the hybrid films within a specific range of molar ratios of tetraethyl orthosilicate to cationic amphiphile. We did not observe any long-range ordering in fully organic analogues unless quaternary ammonium groups were replaced by tertiary amines. These observations suggest that charge screening in these biscationic conjugated molecules by the mineral phase is a key factor in the evolution of long range order in the self-assembling hybrids.

  8. High-intensity ultrasonication as a way to prepare graphene/amorphous iron oxyhydroxide hybrid electrode with high capacity in lithium battery.

    Science.gov (United States)

    González, José R; Menéndez, Rosa; Alcántara, Ricardo; Nacimiento, Francisco; Tirado, José L; Zhecheva, Ekaterina; Stoyanova, Radostina

    2015-05-01

    The preparation of graphene/iron oxyhydroxide hybrid electrode material with very homogeneous distribution and close contact of graphene and amorphous iron oxyhydroxide nanoparticles has been achieved by using high-intensity ultrasonication. Due to the negative charge of the graphene surface, iron ions are attracted toward the surface of dispersed graphene, according to the zeta potential measurements. The anchoring of the FeO(OH) particles to the graphene layers has been revealed by using mainly TEM, XPS and EPR. TEM observations show that the size of the iron oxide particles is about 4 nm. The ultrasonication treatment is the key parameter to achieve small particle size in these graphene/iron oxyhydroxide hybrid materials. The electrochemical behavior of composite graphene/amorphous iron oxyhydroxide prepared by using high-intensity ultrasonication is outstanding in terms of gravimetric capacity and cycling stability, particularly when metallic foam is used as both the substrate and current collector. The XRD-amorphous character of iron oxyhydroxide in the hybrid electrode material and the small particle size contribute to achieve the improved electrochemical performance.

  9. Ionic liquid-assisted formation of cellulose/calcium phosphate hybrid materials

    Science.gov (United States)

    Salama, Ahmed; Neumann, Mike; Günter, Christina

    2014-01-01

    Summary Cellulose/calcium phosphate hybrid materials were synthesized via an ionic liquid-assisted route. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis/differential thermal analysis show that, depending on the reaction conditions, cellulose/hydroxyapatite, cellulose/chlorapatite, or cellulose/monetite composites form. Preliminary studies with MC3T3-E1 pre-osteoblasts show that the cells proliferate on the hybrid materials suggesting that the ionic liquid-based process yields materials that are potentially useful as scaffolds for regenerative therapies. PMID:25247137

  10. Ionic liquid-assisted formation of cellulose/calcium phosphate hybrid materials

    Directory of Open Access Journals (Sweden)

    Ahmed Salama

    2014-09-01

    Full Text Available Cellulose/calcium phosphate hybrid materials were synthesized via an ionic liquid-assisted route. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis/differential thermal analysis show that, depending on the reaction conditions, cellulose/hydroxyapatite, cellulose/chlorapatite, or cellulose/monetite composites form. Preliminary studies with MC3T3-E1 pre-osteoblasts show that the cells proliferate on the hybrid materials suggesting that the ionic liquid-based process yields materials that are potentially useful as scaffolds for regenerative therapies.

  11. Preparation and Behaviour of New Materials for Percutaneous Access

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The reinforcing effects on hydroxyapatite ( abbreviated HA ) of phosphate glass additives were researched. The samples of reinforced HA ( abbreviated RHA ) and control material were prepared and then percutaneously implanted in the skin of experiment animal. The histomorphology of the part skin tissue were observed.By a biomimetic process, the method and conditions of forming HA coating on the surface of medical silicon rubber(abbreviated MSR) were studied. The results illustrate that the phosphate glass additives have obvious reinforcing effects on HA. In the percutaneous implantation test, neither clear infiltration of inflammatory cells nor marked downgrowth of epidermis was observed for the part tissue surrounded RHA. The surface modification of MSR for percutaneous access could be attained by biomimetic synthesis of HA coating.

  12. Influence of silica-based hybrid material on the gas permeability of hardened cement paste

    Science.gov (United States)

    Li, R.; Hou, P.; Xie, N.; Zhou, Z.; Cheng, X.

    2017-03-01

    Surface treatment is one of the most effective ways to elongate the service life of concrete. The surface treatment agents, including organic and inorganic types, have been intensively studied. In this paper, the silica-based hybrid nanocomposite, which take advantages of both organic and inorganic treatment agents, was synthesized and used for surface treatment of hardened cement-based material. The effectiveness of organic and inorganic hybrid nanocomposite was evaluated through investigations on the gas permeability of cement-based materials. The results showed that SiO2/PMHS hybrid nanocomposite can greatly decrease the gas transport properties of hardened cement-based materials and has a great potential for surface treatment of cementitious materials.

  13. 46 CFR 160.077-11 - Materials-Recreational Hybrid PFD's.

    Science.gov (United States)

    2010-10-01

    ..., AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hybrid Inflatable Personal Flotation... intended. (b) Flotation material. Inherent buoyancy must be provided by— (1) Plastic foam meeting— (i.... Rubber coated fabric must be of a copper-inhibiting type. (3) Inner envelope fabric. Inner envelope...

  14. Preparation and characterization of TiO 2-cationic hybrid nanoparticles as electrophoretic particles

    Science.gov (United States)

    Li, Jingjing; Deng, Liandong; Xing, Jinfeng; Dong, Anjie; Li, Xianggao

    2012-01-01

    The hybrid nanoparticles (TiO2-HNPs) with TiO2 nanoparticles as core and with poly(N,N-dimethylaminoethyl methacrylate-co-methyl methacrylate) by using triallylamine as cross-linking agent as shell were firstly prepared via atom transfer radical polymerization (ATRP) in methanol. Then the hybrid nanoparticles with positive charge were produced by the quaternization with methyl iodide as quaternization reagent so as to endow them with greater electrophoretic mobility. The cationic hybrid nanoparticles (TiO2-CHNPs) were studied by means of transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and dynamic light scattering (DLS) measurements. The results indicate that the cationic polymer is successfully grafted on the surface of the TiO2 nanoparticles. The particle size of TiO2-CHNPs is about 150 nm and the polydispersity index (PDI) is 0.307. The zeta potential, the contrast ratio of white state to dark state and response time of TiO2-CHNPs are +16.8 mV, 30 and 3 s, respectively, which show the potential application prospect in the development of electrophoretic ink.

  15. Preparation and gas sensing properties of novel CdS-supramolecular organogel hybrid films

    Energy Technology Data Exchange (ETDEWEB)

    Xia Huiyun; Peng Junxia; Liu Kaiqiang; Li Chen; Fang Yu [Key Laboratory of Applied Surface and Colloid Chemistry of Ministry of Education, School of Chemistry and Materials Science, Shaanxi Normal University, Xi' an 710062 (China)], E-mail: yfang@snnu.edu.cn

    2008-05-21

    A novel CdS-supramolecular organogel hybrid film with unusual morphology has been fabricated by exposing a supramolecular organogel film containing Cd(Ac){sub 2} in an H{sub 2}S atmosphere at room temperature. The organogel film was prepared by spin-coating a LMOG (low-molecular weight organic gelator) gel of dmethyl sulfoxide onto a glass plate substrate. XRD, SEM, EDS, TG-DTA, UV-vis, PL (photoluminescence) spectroscopy and PL lifetime measurements were employed to characterize the film. It was shown that the organogel film had functioned as a template to control the morphology of the final hybrid film. The quantities and sizes of the CdS particles embedded in the organogel films can be easily altered by varying the initial concentration of Cd(Ac){sub 2}. Importantly, the PL of the hybrid film is sensitive to the presence of some volatile organic monoamines and diamines. The selectivity and reversibility of the sensing process were investigated.

  16. Preparation and Performance of Poly(butyl fumarate-Based Material for Potential Application in LED Encapsulation

    Directory of Open Access Journals (Sweden)

    Liang Wang

    2017-02-01

    Full Text Available A UV-curable poly(butyl fumarate (PBF/poly(propylene fumarate-diacrylate (PPF-DA hybrid material with good performance for LED encapsulation is introduced in the paper. They have been prepared by radical polymerization using PBF and PPF-DA macromers with a UV curing system. PBF and PPF-DA were characterized by Fourier-transform infrared (FT-IR and H-nuclear magnetic resonance (1H NMR. The thermal behavior, optical and mechanical properties of the material were examined by thermogravimetric analysis (TGA, differential scanning calorimetry (DSC, ultraviolet-visible spectroscopy (UV–vis, and a material testing system mechanical testing machine, respectively. The results indicated that the hybrid material has a suitable refractive index (n = 1.537 and high transmittance (99.64% in visible range before/after thermal aging. With the increasing of the double bond ratio from 0.5 to 2, the water absorption ratios of the prepared encapsulation material were 1.22%, 1.87% and 2.88%, respectively. The mechanical property experiments showed that bonding strength was in the range of 1.86–3.40 MPa, tensile-shear strength ranged from 0.84 MPa to 1.57 MPa, and compression strength was in the range of 5.10–27.65 MPa. The cured PBF/PPF-DA hybrid material can be used as a light-emitting diode (LED encapsulant, owing to its suitable refractive index, high transparency, excellent thermal stability, lower water absorption, and good mechanical properties.

  17. Tetraalkylphosphonium polyoxometalate ionic liquids: novel, organic-inorganic hybrid materials.

    Science.gov (United States)

    Rickert, Paul G; Antonio, Mark R; Firestone, Millicent A; Kubatko, Karrie-Ann; Szreder, Tomasz; Wishart, James F; Dietz, Mark L

    2007-05-10

    Pairing of a Keggin or Lindqvist polyoxometalate (POM) anion with an appropriate tetraalkylphosphonium cation is shown to yield the first members of a new family of ionic liquids (ILs). Detailed characterization of one of them, an ambient-temperature "liquid POM" comprising the Lindqvist salt of the trihexyl(tetradecyl) phosphonium cation, by voltammetry, viscometry, conductimetry, and thermal analysis indicates that it exhibits conductivity and viscosity comparable to those of the one previously described inorganic-organic POM-IL hybrid but with substantially improved thermal stability.

  18. Multidimensional materials and device architectures for future hybrid energy storage

    Science.gov (United States)

    Lukatskaya, Maria R.; Dunn, Bruce; Gogotsi, Yury

    2016-09-01

    Electrical energy storage plays a vital role in daily life due to our dependence on numerous portable electronic devices. Moreover, with the continued miniaturization of electronics, integration of wireless devices into our homes and clothes and the widely anticipated `Internet of Things', there are intensive efforts to develop miniature yet powerful electrical energy storage devices. This review addresses the cutting edge of electrical energy storage technology, outlining approaches to overcome current limitations and providing future research directions towards the next generation of electrical energy storage devices whose characteristics represent a true hybridization of batteries and electrochemical capacitors.

  19. Tetraalkylphosphonium polyoxometalate ionic liquids : novel, organic-inorganic hybrid materials.

    Energy Technology Data Exchange (ETDEWEB)

    Rickert, P. G.; Antonio, M. P.; Firestone, M. A.; Kubatko, K.-A.; Szreder, T.; Wishart, J. F.; Dietz, M. L.; Chemistry; Univ. of Notre Dame; BNL

    2007-01-01

    Pairing of a Keggin or Lindqvist polyoxometalate (POM) anion with an appropriate tetraalkylphosphonium cation is shown to yield the first members of a new family of ionic liquids (ILs). Detailed characterization of one of them, an ambient-temperature 'liquid POM' comprising the Lindqvist salt of the trihexyl(tetradecyl) phosphonium cation, by voltammetry, viscometry, conductimetry, and thermal analysis indicates that it exhibits conductivity and viscosity comparable to those of the one previously described inorganic-organic POM-IL hybrid but with substantially improved thermal stability.

  20. Inorganic and hybrid inorganic-organic systems for conservative treatments of stone and wood materials

    OpenAIRE

    Bergamonti, Laura

    2015-01-01

    Inorganic and hybrid inorganic-organic systems for conservative treatments of stone and wood materials The research has focused on the synthesis, characterization and application of inorganic and hybrid inorganic-organic systems for conservative treatments of stone and wood. The wood preservatives synthesized and tested for biocidal activity are polyamidoamines functionalized with hydroxyl and siloxane groups, while the coatings applied on the stones are water based TiO2 nanosols with ...

  1. STUDY AND FABRICATION OF SOYBEAN- KEVLAR HYBRID COMPOSITE MATERIAL

    OpenAIRE

    Dilip M R*, Dr. B R Narendra Babu

    2016-01-01

    The prerequisite for most outstanding and normal composite materials to be delivered or recognized, having eco-pleasing ascribes and have ability to acclimate to trademark changes happening on regular calendar, has passed on individuals to find new sources and variety of composite materials to be made. At the present age, trademark fiber composites having near properties, from renewable normal resources expect a vital part in course of action of composite material when diverged from man-made ...

  2. Preparation of Al-Ce hybrid adsorbent and its application for defluoridation of drinking water

    Energy Technology Data Exchange (ETDEWEB)

    Liu Han [Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); Deng Shubo, E-mail: dengshubo@tsinghua.edu.cn [Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); POPs Research Center, Tsinghua University, Beijing 100084 (China); Li Zhijian; Yu Gang; Huang Jun [Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); POPs Research Center, Tsinghua University, Beijing 100084 (China)

    2010-07-15

    A novel Al-Ce hybrid adsorbent with high sorption capacity for fluoride was prepared through the coprecipitation method in this study, and its preparation conditions were optimized. X-ray diffraction (XRD) and scanning electron microscope (SEM) results showed that the hybrid adsorbent was of amorphous structure and constituted by some aggregated nanoparticles. As the adsorbent had the zero point of {zeta} potential at pH 9.6, it was very effective in fluoride removal from aqueous solution via electrostatic interaction. The results of sorption experiments including sorption kinetics, isotherms, and the effect of solution pH showed that the sorption of fluoride on the Al-Ce adsorbent was fast and pH-dependent. Especially, the adsorbent had high sorption capacity up to 27.5 mg g{sup -1} for fluoride at the equilibrium fluoride concentration of 1 mg L{sup -1}, much higher than that of the conventional adsorbents. Fourier transform infrared (FTIR) analysis and zeta potential measurement showed that the hydroxyl groups and the protonated hydroxyl groups on the adsorbent surface were involved in the fluoride adsorption.

  3. Novel hybrid organic-inorganic sol-gel materials based on highly efficient heterocyclic push-pull chromophores

    Science.gov (United States)

    Abbotto, Alessandro; Bozio, Renato; Brusatin, Giovanna; Facchetti, Antonio; Guglielmi, Massimo; Innocenzi, Plinio; Meneghetti, Moreno; Pagani, Giorgio A.; Signorini, Raffaella

    1999-10-01

    We report the synthesis of sol-gel materials based on highly efficient heterocycle-based push-pull chromophores showing second- and third-order nonlinear optical activity. We show the proper functionalization of the best performing chromophores and their incorporation into a hybrid organic- inorganic sol-gel matrix. Different types of functionalization of the active molecule have been considered, including hydroxyl and alkoxysilyl end-groups. The functionalization strategy responded to different criteria such as stability and synthetic availability of the final molecular precursors, their solubility, and the used synthetic approach to the sol-gel material. The synthesis of the sol-gel materials has been tuned in order to preserve molecular properties and control important factors such as final concentration of the active dye in the matrix. Both acid- and base-catalyzed sol-gel synthesis has been taken into account. 3-Glycidoxypropyltrimethoxysilane and 3- aminopropyltriethoxysilane have been used as the organically modified alkoxides to prepare the hybrid organic-inorganic matrix. Characterization of the spectroscopic properties of the sol-gel materials is presented.

  4. Hybrid fundamental-solution-based FEM for piezoelectric materials

    Science.gov (United States)

    Cao, Changyong; Qin, Qing-Hua; Yu, Aibing

    2012-10-01

    In this paper, a new type of hybrid finite element method (FEM), hybrid fundamental-solution-based FEM (HFS-FEM), is developed for analyzing plane piezoelectric problems by employing fundamental solutions (Green's functions) as internal interpolation functions. A modified variational functional used in the proposed model is first constructed, and then the assumed intra-element displacement fields satisfying a priori the governing equations of the problem are constructed by using a linear combination of fundamental solutions at a number of source points located outside the element domain. To ensure continuity of fields over inter-element boundaries, conventional shape functions are employed to construct the independent element frame displacement fields defined over the element boundary. The proposed methodology is assessed by several examples with different boundary conditions and is also used to investigate the phenomenon of stress concentration in infinite piezoelectric medium containing a hole under remote loading. The numerical results show that the proposed algorithm has good performance in numerical accuracy and mesh distortion insensitivity compared with analytical solutions and those from ABAQUS. In addition, some new insights on the stress concentration have been clarified and presented in the paper.

  5. Ecosustainable Development of Novel Bio-inorganic Hybrid Materials as UV Protection Systems for Potential Cosmetic Applications.

    Science.gov (United States)

    Villa, Carla; Lacapra, Chiara; Rosa, Roberto; Veronesi, Paolo; Leonelli, Cristina

    2015-01-01

    A new organoclay, bio-inorganic hybrid material, was successfully prepared following the "green chemistry" principles, exploiting microwave irradiation (as an alternative energetic source) in both the solvent-free synthesis of the organic filler (UVB filter) and in its hydrothermal intercalation in a sodium Bentonite clay (renewable natural inorganic source at low temperature). The organic filler is a benzylidene camphor derivative with the same cationic moiety as the well- known UV filter camphor benzalkonium methosulfate. The aim of the research was the ecosustainable development of a new UV protection model, suitable for use in cosmetic and pharmaceutical products, with potential advantages of stability, efficiency and safety compared to the commercially available UVB sunscreens. The organically modified clay was thoroughly investigated using X-ray diffraction (XRD), infrared spectroscopy (IR), thermo gravimetric analysis and differential thermal analysis (DTA). Results confirmed the complete intercalation of the organic filler in the interlayer region of the smectite clay, leading to a new bio-inorganic hybrid material with potential for cosmetic and pharmaceutical applications in the UV protection field, as confirmed by preliminary photochemical studies. This work represents the first example in the use of Na-Bentonite cationic clay (usually employed as rheological additive) as hosting agent of the synthesized quaternary UVB filter, as well as in the complete MW-assisted preparation of the organoclay, starting from the synthesis of the organic UV sunscreen to its hydrothermal intercalation.

  6. Crash simulation of hybrid structures considering the stress and strain rate dependent material behavior of thermoplastic materials

    Science.gov (United States)

    Hopmann, Ch.; Schöngart, M.; Weber, M.; Klein, J.

    2015-05-01

    Thermoplastic materials are more and more used as a light weight replacement for metal, especially in the automotive industry. Since these materials do not provide the mechanical properties, which are required to manufacture supporting elements like an auto body or a cross bearer, plastics are combined with metals in so called hybrid structures. Normally, the plastics components are joined to the metal structures using different technologies like welding or screwing. Very often, the hybrid structures are made of flat metal parts, which are stiffened by a reinforcement structure made of thermoplastic materials. The loads on these structures are very often impulsive, for example in the crash situation of an automobile. Due to the large stiffness variation of metal and thermoplastic materials, complex states of stress and very high local strain rates occur in the contact zone under impact conditions. Since the mechanical behavior of thermoplastic materials is highly dependent on these types of load, the crash failure of metal plastic hybrid parts is very complex. The problem is that the normally used strain rate dependent elastic/plastic material models are not capable to simulate the mechanical behavior of thermoplastic materials depended on the state of stress. As part of a research project, a method to simulate the mechanical behavior of hybrid structures under impact conditions is developed at the IKV. For this purpose, a specimen for the measurement of mechanical properties dependet on the state of stress and a method for the strain rate depended characterization of thermoplastic materials were developed. In the second step impact testing is performed. A hybrid structure made from a metal sheet and a reinforcement structure of a Polybutylenterephthalat Polycarbonate blend is tested under impact conditions. The measured stress and strain rate depended material data are used to simulate the mechanical behavior of the hybrid structure under highly dynamic load with

  7. Hybrid Titanium Composite Laminates: A New Aerospace Material

    Science.gov (United States)

    Johnson, W. S.; Cobb, Ted Q.; Lowther, Sharon; St.Clair, T. L.

    1998-01-01

    In the realm of aerospace design and performance, there are few boundaries in the never-ending drive for increased performance. This thirst for ever-increased performance of aerospace equipment has driven the aerospace and defense industries into developing exotic, extremely high-performance composites that are pushing the envelope in terms of strength-to-weight ratios, durability, and several other key measurements. To meet this challenge of ever-increasing improvement, engineers and scientists at NASA-Langley Research Center (NASA-LaRC) have developed a high-temperature metal laminate based upon titanium, carbon fibers, and a thermoplastic resin. This composite, known as the Hybrid Titanium Composite Laminate, or HTCL, is the latest chapter in a significant, but relatively short, history of metal laminates.

  8. Synergistically Enhanced Optical Limiting Property of Graphene Oxide Hybrid Materials Functionalized with Pt Complexes.

    Science.gov (United States)

    Liu, Rui; Hu, Jinyang; Zhu, Senqiang; Lu, Jiapeng; Zhu, Hongjun

    2017-09-12

    Recently, graphene-based materials have become well-known nonlinear optical materials for the potential application of laser protection. Two new graphene oxide-platinum  complex (GO-Pt) hybrid materials (GO-Pt-1, GO-Pt-2) have been fabricated through covalent modification and electrostatic adsorption of different Pt complexes with GO. The structural and photophysical properties of the resultant hybrid materials were studied. The nonlinear optical properties and optical power limiting (OPL) performance of Pt complexes, GO, and GO-Pt hybrid materials were investigated by using Z-scan measurements at 532 nm. At the same transmittance, the results illustrate that functionalization of GO makes GO-Pt hybrid materials possess better nonlinear optical properties and OPL performance than individual Pt complexes and GO due to a combination of nonlinear scattering, nonlinear absorption, and photoinduced electron and energy transfer between GO and Pt complex moieties. Furthermore, the nonlinear optics and OPL performance of GO-Pt-2 are better than those of GO-Pt-1, due to not only the excellent optical limiting of Pt-2 and more molecules per area of GO but also the way of combination of Pt-2 and GO.

  9. Field Emission Properties of the Graphene Double-Walled Carbon Nanotube Hybrid Films Prepared by Vacuum Filtration and Screen Printing

    OpenAIRE

    Jinzhuo Xu; Tao Feng; Yiwei Chen; Zhuo Sun

    2013-01-01

    The graphene double-walled carbon nanotube (DWCNT) hybrid films were prepared by vacuum filtration and screen printing. Their electron field emission properties have been studied systematically. The electron emission properties of the hybrid films are much better than those of pure DWCNT films and pure graphene films. Comparing with the screen printed films, the vacuum filtered films have many advantages, such as lower turn-on field, higher emission current density, better uniformity, better ...

  10. Preparation and characteristics of high pH-resistant sol-gel alumina-based hybrid organic-inorganic coating for solid-phase microextraction of polar compounds.

    Science.gov (United States)

    Liu, Mingming; Liu, Ying; Zeng, Zhaorui; Peng, Tianyou

    2006-03-10

    A novel alumina-based hybrid organic-inorganic sol-gel coating was first developed for solid-phase microextraction (SPME) from a highly reactive alkoxide precursor, aluminum sec-butoxide, and a sol-gel-active organic polymer hydroxyl-terminated polydimethylsiloxane (OH-TSO). The underlying mechanism was discussed and confirmed by IR spectra. The porous surface structure of the sol-gel coating was revealed by scanning electron microscopy. A detailed investigation was conducted to evaluate the remarked performance of the newly developed sol-gel alumina-OH-TSO hybrid materials. In stark contrast to the sol-gel silica-based coating, the alumina-based coating demonstrated excellent pH stability. In addition, good thermal resistance and coating preparation reproducibility are also its outstanding performance. As compared to silica-based hybrids material, the ligand exchange ability of alumina makes it structurally superior extraction sorbents for polar compounds, such as fatty acids, phenols, alcohols, aldehydes and amines. Practical applicability of the prepared alumina-OH-TSO fiber was demonstrated through the analysis of volatile alcohols and fatty acids in beer. The recoveries obtained ranged from 85.7 to 104% and the relative standard deviation values for all analytes were below 9%.

  11. Preparation of AgBr@SiO{sub 2} core@shell hybrid nanoparticles and their bactericidal activity

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yuanyuan [Key Laboratory for Special Functional Materials of Ministry of Education, Henan University, Kaifeng 475004 (China); Yang, Lisu [Key Laboratory for Special Functional Materials of Ministry of Education, Henan University, Kaifeng 475004 (China); Henna Sports School, Zhengzhou 450045 (China); Zhao, Yanbao, E-mail: yanbaozhao@126.com [Key Laboratory for Special Functional Materials of Ministry of Education, Henan University, Kaifeng 475004 (China); Li, Binjie; Sun, Lei; Luo, Huajuan [Key Laboratory for Special Functional Materials of Ministry of Education, Henan University, Kaifeng 475004 (China)

    2013-04-01

    AgBr@SiO{sub 2} core@shell hybrid nanoparticles (NPs) were successfully prepared by sol-gel method. Their morphology and structure were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The hybrid NPs are predominantly spherical in shape, with an average diameter of 180–200 nm, and each NP contains one inorganic core. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the hybrid NPs were examined against Staphylococcus aureus (S. aureus), Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli), respectively. Results indicated that the AgBr@SiO{sub 2} NPs had excellent antibacterial activity. - Highlights: ► Presents a novel antibacterial agent “AgBr@ SiO{sub 2} NPs”. ► AgBr@SiO{sub 2} hybrid NPs could provide long-term antimicrobial effect. ► AgBr@SiO{sub 2} hybrid NPs have excellent antibacterial activity.

  12. Organic/Organometallic Hybrids as Broadband Nonlinear Transmission Materials

    Science.gov (United States)

    2010-06-01

    property correlation in organometallic complexes in order to develop broadband nonlinear transmission materials . To realize this goal, we have...platinum complexes and 10 zinc phthalocyanine derivatives provided by collaborators in China. From these studies, we have discovered that in order to...in the near-IR region still limited their application as broadband nonlinear absorbing materials . To solve this problem, two approaches were

  13. ORGANIC-INORGANIC HYBRIDS PREPARED FROM ALKYL PHOSPHONIUM SALTS INTERCALATED MONTMORILLONITES

    Directory of Open Access Journals (Sweden)

    SAHELI GANGULY

    2012-12-01

    Full Text Available Present investigation is focused on systematic and detailed characterization of alkyl phosphonium intercalated montmorillonite (MMT. The objective of the work is to provide a better understanding of the specific changes in properties of the hybrid material with changes in structure of incoming organic cations. In the present work, Na-MMT was intercalated with phosphonium salts of two different cationic head compositions namely alkyl triphenyl and alkyl tributyl groups. Length of alkyl chain was also varied. Resultant organic-inorganic hybrids were characterized by X-ray diffraction (XRD, Transmission electron microscopy (TEM, Thermogravimetry (TG and Fourier transformed infrared spectroscopy (FTIR. Effective volume occupied by the cationic heads influenced interlayer arrangements. Intercalated MMT with two different cationic heads behaved differently in relation to thermal decomposition patterns. Possible explanation was given based on hybridization of bonds. Van der Waals attachment of alkyl chains influenced the interlayer stacking and organic loading. Attempts were made to correlate the changes in properties of intercalated MMT with the structural aspects of incoming organic cations.

  14. Preparation of patterned graphene-ZnO hybrid nanoflower and nanorods on ITO surface

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Sin Tee; Umar, Marjoni Imamora Ali; Ginting, Riski Titian; Yahaya, Muhammad; Yap, Chi Chin [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Umar, Akrajas Ali; Salleh, Muhamad Mat; Majlis, Burhanuddin Yeop; Naumar, Fitri Yenni [Institute of Microengineering and Nanoelectronics (IMEN), Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor (Malaysia)

    2013-11-27

    Hybrid ZnO nanostructure with controlled morphology have been proved to enhance the physical and chemical properties of the material and used as photodiode and sensor. In this paper, hybrid graphene-ZnO nanoflower and nanorods have been successfully synthesized via a seed mediated method with micropatterned ZnO nanoseed treated with multilayer graphene (MLG) in a hydrothermal process. In typical process, the ZnO nanoseeds with and without resists were spin coated with a multilayer graphene prior to the growth process. The treated seed was then used to grow the ZnO nanostructures in the growth solution that contained equimolar (0.04 M) of zinc nitrate hexahydrate and hexamethylenetetramine. The growth process was carried out inside an autoclave at temperature 70 °C. The growth time was 4 h. It was proved that the MLG treatment on micropatterning substrate may induce new morphology formation of ZnO nanostructure. It is expected that the heteroepitaxy reaction occurred between the MLG and ZnO interface. This presence method can be used as an alternative approach to control the morphology of hybrid ZnO nanostructure growth.

  15. Hybrid Organic/Inorganic Materials Depth Profiling Using Low Energy Cesium Ions.

    Science.gov (United States)

    Noël, Céline; Houssiau, Laurent

    2016-05-01

    The structures developed in organic electronics, such as organic light emitting diodes (OLEDs) or organic photovoltaics (OPVs) devices always involve hybrid interfaces, joining metal or oxide layers with organic layers. No satisfactory method to probe these hybrid interfaces physical chemistry currently exists. One promising way to analyze such interfaces is to use in situ ion beam etching, but this requires ion beams able to depth profile both inorganic and organic layers. Mono- or diatomic ion beams commonly used to depth profile inorganic materials usually perform badly on organics, while cluster ion beams perform excellently on organics but yield poor results when organics and inorganics are mixed. Conversely, low energy Cs(+) beams (organic and inorganic materials depth profiling with comparable erosion rates. This paper shows a successful depth profiling of a model hybrid system made of metallic (Au, Cr) and organic (tyrosine) layers, sputtered with 500 eV Cs(+) ions. Tyrosine layers capped with metallic overlayers are depth profiled easily, with high intensities for the characteristic molecular ions and other specific fragments. Metallic Au or Cr atoms are recoiled into the organic layer where they cause some damage near the hybrid interface as well as changes in the erosion rate. However, these recoil implanted metallic atoms do not appear to severely degrade the depth profile overall quality. This first successful hybrid depth profiling report opens new possibilities for the study of OLEDs, organic solar cells, or other hybrid devices.

  16. Preparation and characterization of inorganic-organic trilayer core-shell polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles

    Science.gov (United States)

    Bai, Ruiqin; Qiu, Teng; Han, Feng; He, Lifan; Li, Xiaoyu

    2012-07-01

    The inorganic-organic trilayer core-shell polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles have been successfully prepared via seeded emulsion polymerization of acrylate monomers and octamethylcyclotetrasiloxane (D4) gradually, using functional polymethacryloxypropylsilsesquioxane (PSQ) latex particles with reactive methacryloxypropyl groups synthesized by the hydrolysis and polycondensation of (3-methacryloxypropyl)trimethoxysilane in the presence of mixed emulsifiers as seeds. The FTIR spectra show that acrylate monomers and D4 are effectively involved in the emulsion copolymerization and formed the polydimethylsiloxane-containing hybrid latex particles. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) confirm that the resultant hybrid latex particles have evident trilayer core-shell structure and a narrow size distribution. XPS analysis also indicates that polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles have been successfully prepared and PDMS is rich in the surface of the hybrid latex film. Additionally, compared with the hybrid latex film without PDMS, the hybrid latex film containing PDMS shows higher hydrophobicity (water contact angle) and lower water absorption.

  17. Preparation and characterization of inorganic-organic trilayer core-shell polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles

    Energy Technology Data Exchange (ETDEWEB)

    Bai Ruiqin [College of Materials Science and Engineering, State Key Laboratory of Organic-Inorganic Composite, Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Qiu Teng, E-mail: qiuteng@mail.buct.edu.cn [College of Materials Science and Engineering, State Key Laboratory of Organic-Inorganic Composite, Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Han Feng; He Lifan [College of Materials Science and Engineering, State Key Laboratory of Organic-Inorganic Composite, Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Li Xiaoyu, E-mail: lixy@mail.buct.edu.cn [College of Materials Science and Engineering, State Key Laboratory of Organic-Inorganic Composite, Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China)

    2012-07-15

    The inorganic-organic trilayer core-shell polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles have been successfully prepared via seeded emulsion polymerization of acrylate monomers and octamethylcyclotetrasiloxane (D{sub 4}) gradually, using functional polymethacryloxypropylsilsesquioxane (PSQ) latex particles with reactive methacryloxypropyl groups synthesized by the hydrolysis and polycondensation of (3-methacryloxypropyl)trimethoxysilane in the presence of mixed emulsifiers as seeds. The FTIR spectra show that acrylate monomers and D{sub 4} are effectively involved in the emulsion copolymerization and formed the polydimethylsiloxane-containing hybrid latex particles. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) confirm that the resultant hybrid latex particles have evident trilayer core-shell structure and a narrow size distribution. XPS analysis also indicates that polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles have been successfully prepared and PDMS is rich in the surface of the hybrid latex film. Additionally, compared with the hybrid latex film without PDMS, the hybrid latex film containing PDMS shows higher hydrophobicity (water contact angle) and lower water absorption.

  18. Chitosan-graft-poly(n-butyl acrylate) copolymer: Synthesis and characterization of a natural/synthetic hybrid material.

    Science.gov (United States)

    Anbinder, Pablo; Macchi, Carlos; Amalvy, Javier; Somoza, Alberto

    2016-07-10

    Two chitosan polymers with different deacetylation degree and molecular weight were subjected to grafting reactions with the aim to enhance the properties of these bio-based materials. Specifically, n-butyl acrylate in different proportions was grafted onto two different deacetylation degree (DD%) chitosan using radical initiation in a surfactant free emulsion system. Infrared spectroscopy was used to confirm grafting and products grafting percentage and efficiency were evaluated against acrylate/chitosan ratio and DD%. Thermal and structural properties and the behavior against water of the raw and grafted biopolymers were studied using several experimental techniques: differential scanning calorimetry, transmission electron microscopy, dynamic light scattering, water swelling, contact angle and positron annihilation lifetime spectroscopy. The influence of the grafting process on the morphological and physicochemical properties of the prepared natural/synthetic hybrid materials is discussed.

  19. MoO2-ordered mesoporous carbon hybrids as anode materials with highly improved rate capability and reversible capacity for lithium-ion battery.

    Science.gov (United States)

    Chen, Ailian; Li, Caixia; Tang, Rui; Yin, Longwei; Qi, Yongxin

    2013-08-28

    A novel hybrid of MoO2-ordered mesoporous carbon (MoO2-OMC) was prepared through a two-step solvothermal chemical reaction route. The electrochemical performances of the mesoporous MoO2-OMC hybrids were examined using galvanostatical charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS) techniques. The MoO2-OMC hybrid exhibits significantly improved electrochemical performance of high reversible capacity, high-rate capability, and excellent cycling performance as an anode electrode material for Li ion batteries. It is revealed that the MoO2-OMC hybrid could deliver the first discharge capacity of 1641.8 mA h g(-1) with an initial Coulombic efficiency of 63.6%, and a reversible capacity as high as 1049.1 mA h g(-1) even after 50 cycles at a current density of 100 mA g(-1), much higher than the theoretical capacity of MoO2 (838 mA h g(-1)) and OMC materials. The MoO2-OMC hybrid demonstrates an excellent high rate capability with capacity of ∼600 mA h g(-1) even at a charge current density of 1600 mA g(-1) after 50 cycles, which is approximately 11.1 times higher than that of the OMC (54 mA h g(-1)) materials. The improved rate capability and reversible capacity of the MoO2-OMC hybrid are attributed to a synergistic reaction between the MoO2 nanoparticles and mesoporous OMC matrices. It is noted that the electrochemical performance of the MoO2-OMC hybrid is evidently much better than the previous MoO2-based hybrids.

  20. Top-down mass spectrometry of hybrid materials with hydrophobic peptide and hydrophilic or hydrophobic polymer blocks.

    Science.gov (United States)

    Alalwiat, Ahlam; Grieshaber, Sarah E; Paik, Bradford A; Kiick, Kristi L; Jia, Xinqiao; Wesdemiotis, Chrys

    2015-11-21

    A multidimensional mass spectrometry (MS) methodology is introduced for the molecular level characterization of polymer-peptide (or polymer-protein) copolymers that cannot be crystallized or chromatographically purified. It encompasses electrospray ionization (ESI) or matrix-assisted laser desorption ionization (MALDI) coupled with mass analysis, tandem mass spectrometry (MS(2)) and gas-phase separation by ion mobility mass spectrometry (IM-MS). The entire analysis is performed in the mass spectrometer ("top-down" approach) within milliseconds and with high sensitivity, as demonstrated for hybrid materials composed of hydrophobic poly(tert-butyl acrylate) (PtBA) or hydrophilic poly(acrylic acid) (PAA) blocks tethered to the hydrophobic decapeptide VPGVGVPGVG (VG2) via triazole linkages. The composition of the major products can be rapidly surveyed by MALDI-MS and MS(2). For a more comprehensive characterization, the ESI-IM-MS (and MS(2)) combination is more suitable, as it separates the hybrid materials based on their unique charges and shapes from unconjugated polymer and partially hydrolyzed products. Such separation is essential for reducing spectral congestion, deconvoluting overlapping compositions and enabling straightforward structural assignments, both for the hybrid copolymers as well as the polymer and peptide reactants. The IM dimension also permits the measurement of collision cross-sections (CCSs), which reveal molecular architecture. The MS and MS(2) spectra of the mobility separated ions conclusively showed that [PtBA-VG2]m and [PAA-VG2]m chains with the expected compositions and sequences were formed. Single and double copolymer blocks (m = 1-2) could be detected. Further, the CCSs of the hybrids, which were prepared via azide/alkyne cycloadditions, confirmed the formation of macrocyclic structures. The top-down methodology described would be particularly useful for the detection and identification of peptide/protein-polymer conjugates which are

  1. A Strip-Loading Optical Waveguide Using Well Poled Stability Organic/Inorganic Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    GAO Wei-Nan; TIAN Mei-Qiang; SUN Xiao-Qiang; WANG Wei; DENG Ling; GAO Lei; ZHANG Da-Ming

    2009-01-01

    An optical waveguide for a polymer modulator based on organic/inorganic hybrid electro-optic (EO) materials is designed and fabricated by utilizing a strip-loading structure.This hybrid material has a controllable refractive index,high EO coefficient and good poled stability,which are suitable for the EO modulators and switches.The embedded waveguide made of the above EO material can reduce the coupling loss. The light is coupled into the gnided-core layer and then undergoes a transition from the buried waveguide into the EO material.Obvious modulation is observed by application of ac voltage to the EO material.The measured Vπ of co-planar waveguide (CPW) is 5 V for the Mach-Zehnder (MZ) modulator in length of 3.5cm.

  2. Design of heterogeneous catalysts via multiple active site positioning in organic-inorganic hybrid materials.

    Science.gov (United States)

    Dufaud, Véronique; Davis, Mark E

    2003-08-06

    Catalytic materials bearing multiple sulfonic acid functional groups and positioned at varying distances from one another on the surface of mesoporous solids are prepared to explore the effects that the spatial arrangement of active sites have on catalytic activity and selectivity. A series of organosiloxane precursors containing either disulfide or sulfonate ester functionalities (synthons of the eventual sulfonic acid groups) are synthesized. From these molecular precursors, a variety of organic-inorganic hybrid, mesostructured SBA-15 silica materials are prepared using a postsynthetic grafting procedure that leads to disulfide and sulfonate ester modified silicas: [Si]CH(2)CH(2)CH(2)SS-pyridyl, 2.SBA, [Si]CH(2)CH(2)CH(2)SSCH(2)CH(2)CH(2)[Si], 3.SBA, [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OCH(2)CH(3), 4.SBA, and [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OC(6)H(4)O(SO(2))(C(6)H(4))CH(2)CH(2)[Si], 6.SBA ([Si] = (tbd1;SiO)(x)()(RO)(3)(-)(x)()Si, where x = 1, 2). By subsequent chemical derivatization of the grafted species, thiol and sulfonic acid modified silicas are obtained. The materials are characterized by a variety of spectroscopic ((13)C and (29)Si CP MAS NMR, X-ray diffraction) and quantitative (TGA/DTA, elemental analysis, acid capacity titration) techniques. In all cases, the organic fragment of the precursor molecule is grafted onto the solid without measurable decomposition, and the precursors are, in general, attached to the surface of the mesoporous oxide by multiple siloxane bridges. The disulfide species 2.SBA and 3.SBA are reduced to the corresponding thiols 7.SBA and 8.SBA, respectively, and 4.SBA and 6.SBA are transformed to the aryl sulfonic acids 11.SBA and 12.SBA, respectively. 7.SBA and 8.SBA differ only in terms of the level of control of the spatial arrangement of the thiol groups. Both 7.SBA and 8.SBA are further modified by oxidation with hydrogen peroxide to produce the alkyl sulfonic acid modified materials 9.SBA and 10.SBA, respectively. The performances

  3. Preparation and characterization of phosphorylated Zr-doped hybrid silica/PSF composite membrane.

    Science.gov (United States)

    Zhang, Yuqing; Jin, Zhenhua; Shan, Xing; Sunarso, Jaka; Cui, Ping

    2011-02-15

    Polysulfone (PSF) membranes are broadly applied in many fields owing to good physicochemical stability, resistance to oxidation and chlorine. But when treated with wastewater containing oil, PSF membranes are easy to be contaminated for its hydrophobicity, which can result in the declining of flux and lifespan of the membrane and limit their application in large scale. To enhance the capability of PSF membrane in the above circumstances, phosphorylated Zr-doped hybrid silica particles (SZP particles) were firstly prepared. SZP particles have various point defects inside their structure and lots of hydroxide radicals on their surface. SZP particles were added to the porous matrix of PSF to prepare a novel composite membrane (SZP/PSF) through a phase inversion process. Finally, the optimum preparation conditions of SZP/PSF composite membranes were determined. The optimum conditions are: the mass ratio of PSF, PEG400 and SZP is 12:10:10; ultrasound 10 min inside each 30 min; the pre-evaporating time is 10s. Optimized SZP/PSF composite membrane was characterized by scanning electron microscope (SEM) and ultrafiltration experiment. The results indicate that SZP particles can be uniformly dispersed in SZP/PSF composite membranes with excellent hydrophilic property, antifouling capability and tensile strength. Therefore, it can be concluded that the optimized SZP/PSF composite membrane is desirable in the treatment of wastewater containing oil and wastewater.

  4. New materials strategies for creating hybrid electronic circuitry (Presentation Video)

    Science.gov (United States)

    Marks, Tobin J.

    2013-09-01

    This lecture focuses on the challenging design and realization of new materials for creating unconventional electronic circuitry. Fabrication methodologies to achieve these goals include high-throughput, large-area printing techniques. Materials design topics to be discussed include: 1. Rationally designed high-mobility p- and n-type organic semiconductors for printed organic CMOS, 2. Polycrystalline and amorphous oxide semiconductors for transparent and mechanically flexible electronics, 3) Self-assembled and printable high-k nanodielectrics enabling ultra-large capacitance, low leakage, high breakdown fields, minimal trapped interfacial charge, and device radiation hardness. 4) Combining these materials sets to fabricate a variety of high-performance thin-film transistor-based devices.

  5. Preparation of collagen-based materials for wound dressing

    Institute of Scientific and Technical Information of China (English)

    吴志谷; 盛志勇; 孙同柱; 耿淼; 黎君友; 姚咏明; 黄祖琇

    2003-01-01

    Objective To describe the methods which were used to develop collagen-based materials for wound dressing.Methods Fresh frozen bovine tendon was treated with 0.05 mol/L acetic acid at pH 3.2 for 48-72 hours, homogenized, filtered, mixed with 8% chondroitin sulphate, for creating a deaerated 1.5%-2.5% collagen solution. The solution was lyophilized in either a pre-frozen or non-pre-frozen mould. The collagen sponge was then cross-linked with 0.25% glutaraldehyde for 24 hours. Three other types of wound dressings were developed using a similar method: collagen membrane with a polyurethane membrane onlay, polyurethane-coated collagen membrane and collagen membrane on gauze.Results It was demonstrated that the use of frozen bovine tendon was stable, and that the prepared collagen sponge contained pores of 50-400 μm in diameter. Conclusions Collagen could be used as wound dressing.

  6. Preparation of molecularly imprinted polymers simazine as material potentiometric sensor

    Directory of Open Access Journals (Sweden)

    Bow Yohandri

    2017-01-01

    Full Text Available Molecular imprinting technology is a promising technique for creating recognition elements for selected compounds and has been successfully applied for synthesis of environmental pollutants such as simazine. Simazine is a pesticide ingredient that is commonly used in agriculture, which has devastating effects on the environment if used excessively. Molecularly imprinted polymer (MIP provides cavities to form a particular space generated by removing the template when the polymer has formed. In this study, MIP using simazine as template had been made by the cooling-heating method and used as a material potentiometric sensor for detecting simazine. A template (simazine was incorporated into a pre-polymerization solution that contains a methacrylic acid as functional monomer, an ethylene glycol dimethacrylate as cross linker, and benzoyl peroxide as initiator. Characterization was performed by scanning electron microscope (SEM and fourier transforms infra-red (FTIR. The FTIR spectra of the MIP showed that the peaks of amine group decrease significantly, indicating that the simazine concentration decreases drastically. Characterization by SEM images showing the broadest pore size distribution with the highest number of pores in the MIP prepared under the heating time of 150 min. The MIPs therefore could be applied as a simazine sensor.

  7. Fabrication of TEOS/PDMS/F127 hybrid coating materials for conservation of historic stone sculptures

    Science.gov (United States)

    Liu, Yurong; Liu, Jia

    2016-08-01

    The present work was aimed to develop a new kind of stone conservation materials (TEOS/PDMS/F127 hybrid coating) by a facile sol-gel method for the protection of decayed sandstones of Chongqing Dazu stone sculptures in China. The hydrophobic property, surface morphology, water vapor permeability, ultraviolet aging resistance and mechanical properties were measured to evaluate the effectiveness of TEOS/PDMS/F127 hybrid coating as a stone conservation material. The results showed that the addition of hydroxyl-terminated polydimethylsiloxane (PDMS-OH) contributed to improve the hydrophobic properties and incorporation of PEO-PPO-PEO (F127) surfactant resulted in the formation of superficial protrusions with micro- and nanoscopic structures and overall alteration of surface morphology and roughness, thus preventing the coating materials from cracking. After treatment with TEOS/PDMS/F127 hybrid coating materials, the ultraviolet aging resistance and mechanical properties of stone were also improved without the obvious effects on the breathability and color of the stone, indicating promising applications of TEOS/PDMS/F127 hybrid coating materials for conservation of historic stone sculptures.

  8. Biocompatible Polymer/Quantum Dots Hybrid Materials: Current Status and Future Developments

    Directory of Open Access Journals (Sweden)

    Lei Shen

    2011-12-01

    Full Text Available Quantum dots (QDs are nanometer-sized semiconductor particles with tunable fluorescent optical property that can be adjusted by their chemical composition, size, or shape. In the past 10 years, they have been demonstrated as a powerful fluorescence tool for biological and biomedical applications, such as diagnostics, biosensing and biolabeling. QDs with high fluorescence quantum yield and optical stability are usually synthesized in organic solvents. In aqueous solution, however, their metallic toxicity, non-dissolubility and photo-luminescence instability prevent the direct utility of QDs in biological media. Polymers are widely used to cover and coat QDs for fabricating biocompatible QDs. Such hybrid materials can provide solubility and robust colloidal and optical stability in water. At the same time, polymers can carry ionic or reactive functional groups for incorporation into the end-use application of QDs, such as receptor targeting and cell attachment. This review provides an overview of the recent development of methods for generating biocompatible polymer/QDs hybrid materials with desirable properties. Polymers with different architectures, such as homo- and co-polymer, hyperbranched polymer, and polymeric nanogel, have been used to anchor and protect QDs. The resulted biocompatible polymer/QDs hybrid materials show successful applications in the fields of bioimaging and biosensing. While considerable progress has been made in the design of biocompatible polymer/QDs materials, the research challenges and future developments in this area should affect the technologies of biomaterials and biosensors and result in even better biocompatible polymer/QDs hybrid materials.

  9. Comparative in vitro assessment of color stability of hybrid esthetic restorative materials against various children′s beverages

    Directory of Open Access Journals (Sweden)

    Kavita Hotwani

    2014-01-01

    Full Text Available Purpose: The present study was aimed to evaluate and compare the color stability of two hybrid tooth-colored restorative materials, namely, resin-modified glass ionomer cement (GC Fuji II LC Capsules - GC Corporation, Tokyo, Japan and giomer (Beautifil II - Shofu Inc, Kyoto, Japan when subjected to immersion in various children′s beverages. Materials and Methods: Standardized disc specimens were prepared using the test restorative materials. After preparation and rehydration of the specimens, baseline color evaluations were performed using spectrophotometer. The readings were recorded according to CIELAB color space. The experimental groups were further subdivided for immersion in orange juice, bournvita milk, and coke. Subsequent to immersion and pH cycling, new color evaluations were carried out after 1 week and 4 weeks for all the experimental groups. The mean color change values were calculated. Results: The obtained data was subjected to statistical analysis. The results indicated that giomer specimens exhibited less color change as compared to RMGIC specimens indicating better color stability. The maximum color changes were found with the use of coke for a period of 4 weeks. Conclusion: Amongst the two materials, giomer showed less color changes as compared to RMGIC indicating a better color stability.

  10. Metal phosphonate hybrid mesostructures: environmentally friendly multifunctional materials for clean energy and other applications.

    Science.gov (United States)

    Ma, Tian-Yi; Yuan, Zhong-Yong

    2011-10-17

    The synthesis of porous hybrid materials has been extended to mesoporous non-silica-based organic-inorganic hybrid materials, in which mesoporous metal phosphonates represent an important family. By using organically bridged polyphosphonic acids as coupling molecules, the homogeneous incorporation of a considerable number of organic functional groups into the metal phosphonate hybrid framework has been realized. Small amounts of organic additives and the pH value of the reaction solution have a large impact on the morphology and textural properties of the resultant hybrid mesoporous metal phosphonate solids. Cationic and nonionic surfactants can be used as templates for the synthesis of ordered mesoporous metal phosphonates. The materials are used as efficient adsorbents for heavy metal ions, CO₂, and aldehydes, as well as in the separation of polycyclic aromatic hydrocarbons. They are also useful photocatalysts under UV and simulated solar light irradiation for organic dye degradation. Further functionalization of the synthesized mesoporous hybrids makes them oxidation and acid catalysts, both with impressive performances in the fields of sustainable energy and environment. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Chemically Integrated Inorganic-Graphene Two-Dimensional Hybrid Materials for Flexible Energy Storage Devices.

    Science.gov (United States)

    Peng, Lele; Zhu, Yue; Li, Hongsen; Yu, Guihua

    2016-12-01

    State-of-the-art energy storage devices are capable of delivering reasonably high energy density (lithium ion batteries) or high power density (supercapacitors). There is an increasing need for these power sources with not only superior electrochemical performance, but also exceptional flexibility. Graphene has come on to the scene and advancements are being made in integration of various electrochemically active compounds onto graphene or its derivatives so as to utilize their flexibility. Many innovative synthesis techniques have led to novel graphene-based hybrid two-dimensional nanostructures. Here, the chemically integrated inorganic-graphene hybrid two-dimensional materials and their applications for energy storage devices are examined. First, the synthesis and characterization of different kinds of inorganic-graphene hybrid nanostructures are summarized, and then the most relevant applications of inorganic-graphene hybrid materials in flexible energy storage devices are reviewed. The general design rules of using graphene-based hybrid 2D materials for energy storage devices and their current limitations and future potential to advance energy storage technologies are also discussed.

  12. Development of carbon nanotubes/CoFe{sub 2}O{sub 4} magnetic hybrid material for removal of tetrabromobisphenol A and Pb(II)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Lincheng, E-mail: zhoulc@lzu.edu.cn [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China); Ji, Liqin [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China); Ma, Peng-Cheng [The Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China); Shao, Yanming; Zhang, He; Gao, Weijie; Li, Yanfeng [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China)

    2014-01-30

    Highlights: • Amino-functionalized CoFe{sub 2}O{sub 4} nanoparticles were deposited on MWCNTs in one-pot. • Novel chitosan modified MWCNTs/CoFe{sub 2}O{sub 4} hybrid material were successfully synthesized. • The hybrid material had high specific surface area and abundant functional groups. • The hybrid material exhibited high adsorption properties for TBBPA and Pb(II). • The hybrid material was an efficient, eco-friendly and reusable adsorbent. -- Abstract: Multi-walled carbon nanotubes (MWCNTs) coated with magnetic amino-modified CoFe{sub 2}O{sub 4} (CoFe{sub 2}O{sub 4}–NH{sub 2}) nanoparticles (denoted as MNP) were prepared via a simple one-pot polyol method. The MNP composite was further modified with chitosan (CTS) to obtain a chitosan-functionalized MWCNT/CoFe{sub 2}O{sub 4}–NH{sub 2} hybrid material (MNP–CTS). The obtained hybrid materials were characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectrogram (FT-IR) Analysis and X-ray Photoelectron Spectroscopy (XPS) Analysis, Vibrating Sample Magnetometer (VSM) Analysis and the Brunauer–Emmett–Teller (BET) surface area method, respectively. The composites were tested as adsorbents for tetrabromobisphenol A (TBBPA) and Pb(II), and were investigated using a pseudo-second-order model. The adsorption of TBBPA was well represented by the Freundlich isotherm; the Langmuir model better described Pb(II) absorption. MNP–CTS adsorbed both TBBPA and Pb(II) (maximum adsorption capacities of 42.48 and 140.1 mg g{sup −1}, respectively) better than did MNP without CTS. Magnetic composite particles with adsorbed TBBPA and Pb(II) could be regenerated using 0.2 M NaOH solution and were separable from liquid media using a magnetic field.

  13. Studies on Novel Polymer Materials Prepared through Intermacromolecular Complexation

    Institute of Scientific and Technical Information of China (English)

    WANG Qi; GAO Jun; DAN Yi; CHEN Zhe

    2004-01-01

    The basic feature of polymers is their multi-order structure. Structure change at each level offers a possibility tomodify polymer properties and to develop new polymer materials. Therefore,novel polymer materials can be developed by tailoring their chain structure through chemical bonding among atoms, i.e., via the traditional molecular chemistry methods, e.g., polymerization of new monomer, controlling chain length (molecular weight and molecular weight distribution) and stereoregularity, copolymerization of different kinds of monomers, controlling sequence distribution,block of graft length of copolymer, etc., which have been the focus of polymer chemistry for several decades, as well as by tailoring specific supramolecular architecture using molecules as building block through intermolecular interactions, i.e., via supramolecular science methods, e.g., molecular self-assembly, intermacromolecular complexation, etc., which is a modern and fast-developing academic research field.This paper reports novel polymer materials prepared through intermacromolecular complexation,e.g., a new polymer solid electrolyte poly(metyl methacrylate-methacrylic acid)[P(MMA-MAA)]/poly(ethylene oxide) (PEO)/A2-LiClO4 developed by intermacromolecular complexation through hydrogen bonding, which has enhanced ambient ionic conductivity and fairly good mechanical and film-forming properties, a new polymer microcomposite poly(acrylonitrile-acrylamide-acrylic acid) [P(AN-AM-AA)]/poly(vinyl alcohol) (PVA) reinforced by the twin molecular chain microfibrils formed through intermacromolecular complexation of P(AN-AM-AA) with PVA through hydrogen bonding, which exhibits much better mechanical properties than its constituents and could be used to manufacture PVA based complexed fibers with higher modulus and better dyeability, a new polymer flooding agent poly(acrylamide-acrylic acid)[P(AM-AA)]/poly(acrylamide- dimethyldiallylammonium chloride) [P(AM-DMDAAC)] developed by intermacromolecular

  14. Amylose and amylopectin hybrid materials via enzymatic pathways

    NARCIS (Netherlands)

    van der Vlist, Jeroen; Loos, Katja

    2007-01-01

    Oligo- and polysaccharides are important macromolecules in living systems, showing their multifunctional characteristics in the construction of cell walls, energy storage, cell recognition and their immune response. Saccharides as organic raw materials can open new perspectives on the way to new bio

  15. Photocatalytic self-cleaning poly(L-lactide) materials based on a hybrid between nanosized zinc oxide and expanded graphite or fullerene

    Energy Technology Data Exchange (ETDEWEB)

    Virovska, Daniela [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Paneva, Dilyana, E-mail: panevad@polymer.bas.bg [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Manolova, Nevena [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Rashkov, Iliya, E-mail: rashkov@polymer.bas.bg [Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 103A, BG-1113 Sofia (Bulgaria); Karashanova, Daniela [Institute of Optical Materials and Technologies, Bulgarian Academy of Sciences, Acad. G. Bonchev St., bl. 109, BG-1113 Sofia (Bulgaria)

    2016-03-01

    New self-cleaning materials of polymer fibers decorated with a hybrid between nanosized zinc oxide and expanded graphite (EG) or fullerene (C{sub 60}) were obtained. The new materials were prepared by applying electrospinning in conjunction with electrospraying. Poly(L-lactide) (PLA) was selected as a biocompatible and (bio)degradable polymer carrier. PLA solution was electrospun in combination with electrospraying of a suspension that contained the ZnO/EG or ZnO/C{sub 60} hybrid. Mats with different content of EG or C{sub 60} were obtained. The new materials were characterized by scanning and transmission electron microscopy (SEM and TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray diffraction analysis (XRD). The photocatalytic activity of the materials was evaluated by using model dyes. The formation of a hybrid between ZnO and EG led to enhancement of the photocatalytic activity of the mats at ZnO/EG weight ratios of 90/10 and 85/15. Increase in the photocatalytic activity of the ZnO-containing mats was also achieved by the formation of a hybrid between ZnO and C{sub 60} at a fullerene content of 0.5 and 1.0 wt.% in respect to ZnO weight. The new materials exhibited antibacterial activity as evidenced by the performed studies against Staphylococcus aureus. - Highlights: • New self-cleaning materials are fabricated by electrospinning/electrospraying. • PLA fibers decorated with nanosized ZnO/EG or ZnO/C{sub 60} hybrid are obtained. • Their photocatalytic activity is enhanced as compared to fibers with bare ZnO. • The new materials can be used repeatedly for degradation of MB and RR dyes. • The new self-cleaning materials exhibit antibacterial activity against S. aureus.

  16. Preparation of Cu2ZnSnS4 thin films by hybrid sputtering

    Science.gov (United States)

    Tanaka, Tooru; Nagatomo, Takeshi; Kawasaki, Daisuke; Nishio, Mitsuhiro; Guo, Qixin; Wakahara, Akihiro; Yoshida, Akira; Ogawa, Hiroshi

    2005-11-01

    In order to fabricate Cu2ZnSnS4 thin films, hybrid sputtering system with two sputter sources and two effusion cells is used. The Cu2ZnSnS4 films are fabricated by the sequential deposition of metal elements and annealing in S flux, varying the substrate temperature. The Cu2ZnSnS4 films with stoichiometric composition are obtained at the substrate temperature up to 400 °C, whereas the film composition becomes quite Zn-pool at the substrate temperature above 450 °C. The Cu2ZnSnS4 film shows p-type conductivity, and the optical absorption coefficient and the band gap of the Cu2ZnSnS4 film prepared in this experiment are suitable for fabricating a thin film solar cell.

  17. Preparation of P(DVB-co-MPS) inorganic-organic hybrid polymer microspheres

    Science.gov (United States)

    Wu, Chunrong; Zhang, Jimei; Dai, Zhao; Chen, Xiaoyu

    2010-07-01

    A novel inorganic-organic hybrid polymer microspheres were facilely synthesised by distillation-precipitation polymerization in absence of any stabilizer or surfcant. The process were conducted with [3-(Methacryloyloxy) propyl] trimethoxysilan (MPS) as monomer, divinyl benzene (DVB) as cross linking agent and azobisisobutyronitrile (AIBN) as initator in acetonitrile. A series of silica nanoparticles were prepared in accordance with the volume ratio of MPS, which was varied in the range of 10% to 50%. However, there is no microspheres obtained while the ratio up to 50%. Products were charactered by transmission electron micrograph (TEM) and fourier transform infrared spectroscopy (FTIR). We may infer it from the constructional formular and FTIR graph that there were silicon hydroxyl remained in the microsphere surface.

  18. [Preparation, characterization and surface-enhanced Raman properties of agarose gel/gold nanoparticles hybrid].

    Science.gov (United States)

    Ma, Xiao-yuan; Liu, Ying; Wang, Zhou-ping

    2014-08-01

    Agarose gel/gold nanoparticles hybrid was prepared by adding gold nanoparticles to preformed agarose gel. Naniocomposite structures and properties were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and UV-Vis-NIR absorption spectroscopy. Experimental data indicated a uniform distribution of gold nanoparticles adsorbed on agarose gel network And the excellent optical absorption properties were shown. Based on the swelling-contraction characteristics of agarose gel and the adjustable localized surface plasmon resonance (LSPR) of the gold nanoparticles, the nano-composites were used as surface enhanced Raman scattering (SERS) substrate to detect the Raman signal molecules Nile blue A. Results revealed that the porous structure of the agarose gel provided a good carrier for the enrichment of the gold nanoparticles. The gold nanoparticles dynamic hot-spot effect arising from the agarose gel contraction loss of water in the air greatly enhanced the Raman signal.

  19. Preparation of fluorescent-dye-labeled cDNA from RNA for microarray hybridization.

    Science.gov (United States)

    Ares, Manuel

    2014-01-01

    This protocol describes how to prepare fluorescently labeled cDNA for hybridization to microarrays. It consists of two steps: first, a mixture of anchored oligo(dT) and random hexamers is used to prime amine-modified cDNA synthesis by reverse transcriptase using a modified deoxynucleotide with a reactive amine group (aminoallyl-dUTP) and an RNA sample as a template. Second, the cDNA is purified and exchanged into bicarbonate buffer so that the amine groups in the cDNA react with the dye N-hydroxysuccinimide (NHS) esters, covalently joining the dye to the cDNA. The dye-coupled cDNA is purified again, and the amount of dye incorporated per microgram of cDNA is determined.

  20. Triple-wavelength infrared plasmonic thermal emitter using hybrid dielectric materials in periodic arrangement

    Science.gov (United States)

    Huang, Wei-Lun; Hsiao, Hui-Hsin; Tang, Ming-Ru; Lee, Si-Chen

    2016-08-01

    This paper presents a triple-wavelength infrared plasmonic thermal emitter using a periodic arrangement of hybrid dielectric materials within a tri-layer metal/dielectric/metal structure. The proposed arrangement makes it possible to sustain multiple resonance of localized surface plasmons (LSP), thereby providing an additional degree of freedom by which to vary the resonant wavelengths in the medium infrared region. Variations in the effective refractive index due to the different modal distribution within dielectric gratings results in multiple LSP resonances, and the resonant wavelengths can be easily tuned by altering the compositions of hybrid dielectric materials. The measured dispersion relation diagram and the finite difference time domain simulation indicated that the resonances were localized. They also indicate that the magnetic fields generated by the multiple LSP modes exhibit distribution patterns similar to that of a standing wave in the periodic arrangement of the hybrid dielectric layer, each of which presents an emission peak corresponding to a different modal order.

  1. Gas-Transport-Property Performance of Hybrid Carbon Molecular Sieve−Polymer Materials

    KAUST Repository

    Das, Mita

    2010-10-06

    High-performance hybrid materials using carbon molecular sieve materials and 6FDA-6FpDA were produced. A detailed analysis of the effects of casting processes and the annealing temperature is reported. Two existing major obstacles, sieve agglomeration and residual stress, were addressed in this work, and subsequently a new membrane formation technique was developed to produce high-performing membranes. The successfully improved interfacial region of the hybrid membranes allows the sieves to increase the selectivity of the membranes above the neat polymer properties. Furthermore, an additional performance enhancement was seen with increased sieve loading in the hybrid membranes, leading to an actual performance above the upper bound for pure polymer membranes. The membranes were also tested under a mixed-gas environment, which further demonstrated promising results. © 2010 American Chemical Society.

  2. New Inorganic-organic Hybrid Tetravanadate:Preparation, Characterization and Application in Chemically Modified Electrode

    Institute of Scientific and Technical Information of China (English)

    SUN Ying-hua; LI Xiao-ping; MEI Ze-min; ZHU Yu; NIU Li

    2011-01-01

    A new inorganic-organic hybrid tetravanadate [Co(2,2'-bpy)3]2V4O12.llH2O(l) has been prepared and characterized. X-Ray diffraction study reveals that compound 1 contains classical cluster anions [V4O12]4-, coordi nated cations [Co(2,2'-bpy)3]2+ and eleven water molecules, in which an interesting decamer water cluster is formed.The hybrid nanoparticles were firstly used as a bulk-modifier to fabricate a chemically modified paste electrode (1-CPE). The electrochemical behavior and electrocatalysis of 1-CPE have been studied in detail. The results indicate that 1-CPE has a good electrocatalytic activity toward the reduction of bromate in a 0.5 mol/L H2SO4 aqueous solu tion. I-CPE shows remarkable stability that be ascribed to the hydrogen bonding interactions between V4O12 cluster and water cluster, which are very important for practical application in electrode modification.

  3. Hierarchical structuring of liquid crystal polymer-Laponite hybrid materials.

    Science.gov (United States)

    Tritschler, Ulrich; Zlotnikov, Igor; Zaslansky, Paul; Aichmayer, Barbara; Fratzl, Peter; Schlaad, Helmut; Cölfen, Helmut

    2013-09-03

    Biomimetic organic-inorganic composite materials were fabricated via one-step self-organization on three hierarchical levels. The organic component was a polyoxazoline with pendent cholesteryl and carboxyl (N-Boc-protected amino acid) side chains that was able to form a chiral nematic lyotropic phase and bind to positively charged inorganic faces of Laponite. The Laponite particles formed a mesocrystalline arrangement within the liquid-crystal (LC) polymer phase upon shearing a viscous dispersion of Laponite nanoparticles and LC polymer in DMF. Complementary analytical and mechanical characterization techniques (AUC, POM, TEM, SEM, SAXS, μCT, and nanoindentation) covering the millimeter, micrometer, and nanometer length scales reveal the hierarchical structures and properties of the composite materials consisting of different ratios of Laponite nanoparticles and liquid-crystalline polymer.

  4. Study on the fluorescence and thermal stability of hybrid materials Eu(Phen)2Cl3/MCM-41

    Institute of Scientific and Technical Information of China (English)

    Liangzhun YANG; Lanfen ZHANG; Jun CHEN; Liwen REN; Yanting ZHU; Xiuying WANG; Xibin YU

    2009-01-01

    A series of luminescent hybrid materials Eu (Phen)2Cl3/MCM-41 that the different assembled mass of Eu(Phen)2Cl3 included into the channels of MCM , have been synthesized by combining ultrasound technology. The properties of the hybrid materials were characterized by XRD(X-ray Diffraction), N2-adsorption-desorption, FT-IR and luminescence spectrum. The results show that the rare-earth compounds had been loaded into the holes of mesoporous material MCM-41. The luminescence intensities of the hybrid materials were improved as the increase of the loading concentration of the rare-earth complexes. The hybrid material has the maximal luminescence intensity when it reached the saturated loading concentration (7.17%). To compare with the pure rare-earth complex, the thermal stability of the hybrid materials were enhanced by about 100°C.

  5. Electrochemical synthesis and characterisation of hybrid materials polypyrrole/dodecatungstophosphate as protective agents against steel corrosion

    Science.gov (United States)

    Bonastre Cano, Jose Antonio

    The losses caused by the effect of the corrosion are of the order of 2-3,5% of the GDP of the developed countries or developing only in direct costs, losses in structures or products. This figure doubles by the indirect costs, losses of productivity or demands for delays. Beside the possible losses of human lives, any intent leaded to the decrease of the corrosion in rusty metals is a commendable objective from the point of view of the protection of the environment. Building industry employing reinforced concrete is able to project some structural elements (pillars, wrought, beam, etc.) in principle free of corrosion, assuring during many years the useful life of the work in service. However, the reinforced concrete would be' a perfect solution if the indefinite permanency of the passive state of the steel could be guaranteed. Indeed, although the steel is protected against corrosion due to basic pH which provides the cement, the severe action of saline media or the effect of CO2 can diminish this protection conditions beginning the corrosion in steel elements. Type-p doped conducting polymers, as polypyrrole, are firm candidates to protect carbon steel providing galvanic protection by stabilising the passive layer of Fe oxides initially grown. Doping the polymeric matrix with polioxometalates, concretely phosphotungstate PW12O403-, is a very interesting hypothesis due to their oxidising effect, improving the anodic protection by the hybrid material electrosynthesised on carbon steel substrate. First in the present work, a new method was developed by cyclic voltammetry in LiClO4 + acetonitrile medium in order to diminish the unavoidable oxidation of carbon steel when the electrosyntesis of the hybrid material polypyrrole/PW12O403- is carrying out. The beginning potential of polypyrrole polymerisation is about 0.8 V (vs. Ag/AgCl), a positive potential where oxidation of Fe substrate is high, not allowing the electrodeposition of the hybrid material. On the other

  6. Polymer/Graphene Hybrids for Advanced Energy-Conversion and -Storage Materials.

    Science.gov (United States)

    Cui, Linfan; Gao, Jian; Xu, Tong; Zhao, Yang; Qu, Liangti

    2016-04-20

    Polymer/graphene-based materials with interesting physical and chemical properties have been attracting considerable attention and have been shown to have great potential as active materials in the field of energy conversion and storage. In this review, we focus on recent significant advances in the fabrication and application of polymer/graphene hybrids as electrocatalysts and electrode materials. Synthetic strategies and application of these materials in energy conversion and storage are presented, particularly in devices such as fuel cells, actuators, and supercapacitors, accompanied with a discussion of the challenges and research directions necessary for the future development of polymer/graphene hybrids. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Micrometer and nanometer-scale parallel patterning of ceramic and organic-inorganic hybrid materials

    NARCIS (Netherlands)

    ten Elshof, Johan E.; Khan, Sajid; Göbel, Ole

    2010-01-01

    This review gives an overview of the progress made in recent years in the development of low-cost parallel patterning techniques for ceramic materials, silica, and organic–inorganic silsesquioxane-based hybrids from wet-chemical solutions and suspensions on the micrometer and nanometer-scale. The

  8. Hybridized Plasmons in 2D Nanoslits: From Graphene to Anisotropic 2D Materials

    DEFF Research Database (Denmark)

    Gonçalves, P. A. D.; Xiao, Sanshui; Peres, N. M. R.

    2017-01-01

    of arbitrary width, and remains valid irrespective of the 2D conductive material (e.g., doped graphene, 2D transition metal dichalcogenides, or phosphorene). We derive the dispersion relation of the hybrid modes of a 2D nanoslit along with the corresponding induced potential and electric field distributions...

  9. Modification of the Interfacial Interaction between Carbon Fiber and Epoxy with Carbon Hybrid Materials

    Directory of Open Access Journals (Sweden)

    Kejing Yu

    2016-05-01

    Full Text Available The mechanical properties of the hybrid materials and epoxy and carbon fiber (CF composites were improved significantly as compared to the CF composites made from unmodified epoxy. The reasons could be attributed to the strong interfacial interaction between the CF and the epoxy composites for the existence of carbon nanomaterials. The microstructure and dispersion of carbon nanomaterials were characterized by transmission electron microscopy (TEM and optical microscopy (OM. The results showed that the dispersion of the hybrid materials in the polymer was superior to other carbon nanomaterials. The high viscosity and shear stress characterized by a rheometer and the high interfacial friction and damping behavior characterized by dynamic mechanical analysis (DMA indicated that the strong interfacial interaction was greatly improved between fibers and epoxy composites. Remarkably, the tensile tests presented that the CF composites with hybrid materials and epoxy composites have a better reinforcing and toughening effect on CF, which further verified the strong interfacial interaction between epoxy and CF for special structural hybrid materials.

  10. Hybrid magnetic materials based on layered double hydroxides: from the chemistry towards the applications

    OpenAIRE

    ABELLÁN SÁEZ, GONZALO

    2014-01-01

    Layered double hydroxides (LDHs) are the leitmotiv of this dissertation. Contradicting the assertion that “any past was better”, LDHs have been continuously revisited from the middle of the twentieth century, and represent an excellent example of the never-ending beauty of Chemistry. New synthetic perspectives are giving a new impetus to LDH chemistry, which among hybrid materials, are finding their heyday. This is resulting in novel materials and also paving the way for new fundamental and p...

  11. Anion-exchangeable inorganic-organic hybrid materials synthesized without using templates

    Institute of Scientific and Technical Information of China (English)

    XU Xianzhu; SONG Jiangwei; LI Defeng; XIAO Fengshou

    2004-01-01

    Inorganic-organic hybrid materials have been obtained at room temperature in aqueous solution without using the templates of surfactants. The materials are care fully characterized by anion-exchange measurement, elements analysis, X-ray diffraction, and infrared spectroscopy. Notably, the anion-exchange capacity of the samples (3.9 Interestingly, both small and large anions could be easily exchanged into the samples due to the plasticity of the sam pies, along with the phase transition.

  12. Fabrication and Characteristics of ZnO/OAD-InN/PbPc Hybrid Solar Cells Prepared by Oblique-Angle Deposition

    Directory of Open Access Journals (Sweden)

    Lung-Chien Chen

    2012-08-01

    Full Text Available In this work, lead phthalocyanine (PbPc and ZnO/InN inorganic semiconductor films prepared by oblique-angle deposition (OAD were layered to form heterojunction organic/inorganic hybrid photovoltaic solar cells. Among the available organic materials, phthalocyanines, particularly the non-planar ones such as PbPc, are notable for their absorption in the visible and near infrared regions. The organic/inorganic hybrid solar cells fabricated on ZnO/OAD-InN/PbPc showed short-circuit current density (JSC, open-circuit voltage (VOC, and power conversion efficiencies (η of 1.2 mA/cm2, 0.6 V and 0.144%, respectively.

  13. Fabrication and characteristics of ZnO/OAD-InN/PbPc hybrid solar cells prepared by oblique-angle deposition.

    Science.gov (United States)

    Chen, Cheng-Chiang; Chen, Lung-Chien

    2012-08-08

    In this work, lead phthalocyanine (PbPc) and ZnO/InN inorganic semiconductor films prepared by oblique-angle deposition (OAD) were layered to form heterojunction organic/inorganic hybrid photovoltaic solar cells. Among the available organic materials, phthalocyanines, particularly the non-planar ones such as PbPc, are notable for their absorption in the visible and near infrared regions. The organic/inorganic hybrid solar cells fabricated on ZnO/OAD-InN/PbPc showed short-circuit current density (J(SC)), open-circuit voltage (V(OC)), and power conversion efficiencies (η) of 1.2 mA/cm², 0.6 V and 0.144%, respectively.

  14. Hybrid Organic/Inorganic Materials Depth Profiling Using Low Energy Cesium Ions

    Science.gov (United States)

    Noël, Céline; Houssiau, Laurent

    2016-05-01

    The structures developed in organic electronics, such as organic light emitting diodes (OLEDs) or organic photovoltaics (OPVs) devices always involve hybrid interfaces, joining metal or oxide layers with organic layers. No satisfactory method to probe these hybrid interfaces physical chemistry currently exists. One promising way to analyze such interfaces is to use in situ ion beam etching, but this requires ion beams able to depth profile both inorganic and organic layers. Mono- or diatomic ion beams commonly used to depth profile inorganic materials usually perform badly on organics, while cluster ion beams perform excellently on organics but yield poor results when organics and inorganics are mixed. Conversely, low energy Cs+ beams (hybrid system made of metallic (Au, Cr) and organic (tyrosine) layers, sputtered with 500 eV Cs+ ions. Tyrosine layers capped with metallic overlayers are depth profiled easily, with high intensities for the characteristic molecular ions and other specific fragments. Metallic Au or Cr atoms are recoiled into the organic layer where they cause some damage near the hybrid interface as well as changes in the erosion rate. However, these recoil implanted metallic atoms do not appear to severely degrade the depth profile overall quality. This first successful hybrid depth profiling report opens new possibilities for the study of OLEDs, organic solar cells, or other hybrid devices.

  15. Facile preparation of organic-silica hybrid monolith for capillary hydrophilic liquid chromatography based on "thiol-ene" click chemistry.

    Science.gov (United States)

    Chen, Ming-Luan; Zhang, Jun; Zhang, Zheng; Yuan, Bi-Feng; Yu, Qiong-Wei; Feng, Yu-Qi

    2013-04-05

    In this work, a one-step approach to facile preparation of organic-inorganic hybrid monoliths was successfully developed. After vinyl-end organic monomers and azobisisobutyronitrile (AIBN) were mixed with hydrolyzed tetramethoxysilane (TMOS) and 3-mercaptopropyltrimethoxysilane (MPTMS), the homogeneous mixture was introduced into a fused-silica capillary for simultaneous polycondensation and "thiol-ene" click reaction to form the organic-silica hybrid monoliths. By employing this strategy, two types of organic-silica hybrid monoliths with positively charged quaternary ammonium and amide groups were prepared, respectively. The functional groups were successfully introduced onto the monoliths during the sol-gel process with "thiol-ene" click reaction, which was demonstrated by ζ-potential assessment, energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) spectroscopy. The porous structure of the prepared monolithic columns was examined by scanning electron microscopy (SEM), nitrogen adsorption-desorption measurement, and mercury intrusion porosimetry. These results indicate the prepared organic-silica hybrid monoliths possess homogeneous column bed, large specific surface area, good mechanical stability, and excellent permeability. The prepared monolithic columns were then applied for anion-exchange/hydrophilic interaction liquid chromatography. Different types of analytes, including benzoic acids, inorganic ions, nucleosides, and nucleotides, were well separated with high column efficiency around 80,000-130,000 plates/m. Taken together, we present a facile and universal strategy to prepare organic-silica hybrid monoliths with a variety of organic monomers using one-step approach. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Quantum dot-based organic-inorganic hybrid materials for optoelectronic applications (Conference Presentation)

    Science.gov (United States)

    Lee, Kwang-Sup

    2016-10-01

    Our recent research involves the design, characterization and testing of devices constituting low bandgap conjugated polymers, surface-engineered quantum dots (QDs), carbon nanotube (CNT)-QDs, QDs decorated nanowires, and QD coupled conjugated polymers. The resulting hybrid materials can be used for facilitating the charge/energy transfer and enhancing the charge carrier mobility in highly efficient optoelectronic and photonic devices. Exploiting the full potential of quantum dots (QDs) in optoelectronic devices require efficient mechanisms for transfer of energy or electrons produced in the optically excited QDs. We propose semiconducting π-conjugated molecules as ligands to achieve energy or charge transfer. The hybridization of p-type π-conjugated molecules to the surface of n-type QDs can induce distinct luminescence and charge transport characteristics due to energy and/or charge transfer effects. QDs and π-conjugated molecule hybrids with controlled luminescent properties can be used for new active materials for light-emitting diodes and flexible displays. In addition, such hybrid systems with enhanced charge transfer efficiency can be used for nanoscale photovoltaic devices. We have also explored single nanoparticle based electronics using QDs and π-conjugated molecule hybrids with molecular-scale n-p or n-insulating (ins)-p-heterojunction structures.

  17. Study on the application of reduced graphene oxide and multiwall carbon nanotubes hybrid materials for simultaneous determination of catechol, hydroquinone, p-cresol and nitrite

    Energy Technology Data Exchange (ETDEWEB)

    Hu Fangxin [Education Ministry Key Laboratory on Luminescence and Real-Time Analysis, School of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Chen Shihong, E-mail: cshong@swu.edu.cn [Education Ministry Key Laboratory on Luminescence and Real-Time Analysis, School of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Wang Chengyan [Education Ministry Key Laboratory on Luminescence and Real-Time Analysis, School of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Yuan Ruo, E-mail: yuanruo@swu.edu.cn [Education Ministry Key Laboratory on Luminescence and Real-Time Analysis, School of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Yuan Dehua; Wang Cun [Education Ministry Key Laboratory on Luminescence and Real-Time Analysis, School of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China)

    2012-04-29

    Graphical abstract: In this paper, the reduced graphene oxide and multiwall carbon nanotubes hybrid materials (RGO-MWNTs) were prepared and a novel strategy for the simultaneous determination of multiple environmental contaminations has been proposed on the basis of RGO-MWNTs hybrid materials modified electrode. The hybrid materials were characterized by the scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and N{sub 2} sorption-desorption isotherms. Due to the excellent catalytic activity, enhanced electrical conductivity, high surface area and porous structure of the RGO-MWNTs, the RGO-MWNTs/GCE achieved the simultaneous measurement of hydroquinone (HQ), catechol (CC), p-cresol (PC) and nitrite (NO{sub 2}{sup -}) with well-separate four peaks. Scheme 1a illuminated the preparation process of the RGO-MWNTs hybrid materials. Scheme 1b explains the electron mediating properties of RGO-MWNTs/GCE towards the oxidation of HQ, CC, PC and NO{sub 2}{sup -}. Scheme 1c presented the SEM image of RGO-MWNTs hybrid materials. Scheme 1d and e showed the 2D and 3D AFM images of RGO-MWNTs films, respectively. Highlights: Black-Right-Pointing-Pointer The novel RGO-MWNTs hybrid materials were synthesized. Black-Right-Pointing-Pointer The simultaneous detection of four environmental contaminations was achieved. Black-Right-Pointing-Pointer SEM, AFM, XPS was employed to characterize the RGO-MWNTs hybrid materials. - Abstract: In this paper, the reduced graphene oxide and multiwall carbon nanotubes hybrid materials (RGO-MWNTs) were prepared and a strategy for detecting environmental contaminations was proposed on the basis of RGO-MWNTs modified electrode. The hybrid materials were characterized by the scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and N{sub 2} sorption-desorption isotherms. Due to the excellent catalytic activity, enhanced electrical conductivity and high

  18. Preparing Teachers to Use GIS: The Impact of a Hybrid Professional Development Program on Teachers' Use of GIS

    Science.gov (United States)

    Moore, Steven; Haviland, Don; Moore, William; Tran, Michael

    2016-08-01

    This article reports the findings of a 3-year study of a hybrid professional development program designed to prepare science and mathematics teachers to implement GIS in their classrooms. The study was conducted as part of the CoastLines Innovative Technology Experiences for Students and Teachers project funded by the National Science Foundation. Three cohorts of teachers participated in the program, with each participant receiving 40 h of synchronous online instruction and 80 h of in-person instruction and support over an 8-month period. Data from surveys of participants both before and after the program were analyzed using correlation, ordinary least squares, and ordered logit regression analyses. The analyses revealed increases in the self-reported frequency of GIS use and enhanced feelings of preparation, competence, community, and comfort with respect to using GIS for instruction. A composite index of all impact variables was positively influenced as well. The statistical analyses found a strong relationship between self-reported feelings of preparation and use of GIS. Some support was found for the idea that feelings of competence, community, and comfort were related to the teachers' sense of preparation. The findings suggest that a robust hybrid model of teacher professional development can prepare teachers to use GIS in their classrooms. More research is needed to understand how hybrid models influence the sociopsychological and other dimensions that support teachers' feelings of preparation to implement GIS.

  19. Preparing Teachers to Use GIS: The Impact of a Hybrid Professional Development Program on Teachers' Use of GIS

    Science.gov (United States)

    Moore, Steven; Haviland, Don; Moore, William; Tran, Michael

    2016-12-01

    This article reports the findings of a 3-year study of a hybrid professional development program designed to prepare science and mathematics teachers to implement GIS in their classrooms. The study was conducted as part of the CoastLines Innovative Technology Experiences for Students and Teachers project funded by the National Science Foundation. Three cohorts of teachers participated in the program, with each participant receiving 40 h of synchronous online instruction and 80 h of in-person instruction and support over an 8-month period. Data from surveys of participants both before and after the program were analyzed using correlation, ordinary least squares, and ordered logit regression analyses. The analyses revealed increases in the self-reported frequency of GIS use and enhanced feelings of preparation, competence, community, and comfort with respect to using GIS for instruction. A composite index of all impact variables was positively influenced as well. The statistical analyses found a strong relationship between self-reported feelings of preparation and use of GIS. Some support was found for the idea that feelings of competence, community, and comfort were related to the teachers' sense of preparation. The findings suggest that a robust hybrid model of teacher professional development can prepare teachers to use GIS in their classrooms. More research is needed to understand how hybrid models influence the sociopsychological and other dimensions that support teachers' feelings of preparation to implement GIS.

  20. Preparation of Pd/Bacterial Cellulose Hybrid Nanofibers for Dopamine Detection

    Directory of Open Access Journals (Sweden)

    Dawei Li

    2016-05-01

    Full Text Available Palladium nanoparticle-bacterial cellulose (PdBC hybrid nanofibers were synthesized by in-situ chemical reduction method. The obtained PdBC nanofibers were characterized by a series of analytical techniques. The results revealed that Pd nanoparticles were evenly dispersed on the surfaces of BC nanofibers. Then, the as-prepared PdBC nanofibers were mixed with laccase (Lac and Nafion to obtain mixture suspension, which was further modified on electrode surface to construct novel biosensing platform. Finally, the prepared electrochemical biosensor was employed to detect dopamine. The analysis result was satisfactory, the sensor showed excellent electrocatalysis towards dopamine with high sensitivity (38.4 µA·mM−1, low detection limit (1.26 µM, and wide linear range (5–167 µM. Moreover, the biosensor also showed good repeatability, reproducibility, selectivity and stability and was successfully used in the detection of dopamine in human urine, thus providing a promising method for dopamine analysis in clinical application.

  1. Glass matrix composite material prepared with waste foundry sand

    Directory of Open Access Journals (Sweden)

    ZHANG Zhao-shu

    2006-11-01

    Full Text Available The technology of glass matrix of the composite material manufactured through a sintering process and using waste foundry sand and waste glass as the main raw materials was studied. The effects of technological factors on the performance of this material were studied. The results showed that this composite material is formed with glass as matrix, core particulate as strengthening material, it has the performance of glass and ceramics, and could be used to substitute for stone.

  2. Glass matrix composite material prepared with waste foundry sand

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhao-shu; XIA Ju-pei; ZHU Xiao-qin; LIU Fan; HE Mao-yun

    2006-01-01

    The technology of glass matrix of the composite material manufactured through a sintering process and using waste foundry sand and waste glass as the main raw materials was studied. The effects of technological factors on the performance of this material were studied. The results showed that this composite material is formed with glass as matrix, core particulate as strengthening material, it has the performance of glass and ceramics, and could be used to substitute for stone.

  3. Aerogel Hybrid Composite Materials: Designs and Testing for Multifunctional Applications

    Science.gov (United States)

    Williams, Martha K.; Fesmire, James E.

    2016-01-01

    This webinar will introduce the broad spectrum of aerogel composites and their diverse performance properties such as reduced heat transfer to energy storage, and expands specifically on the aerogel/fiber laminate systems and testing methodologies. The multi-functional laminate composite system, AeroFiber, and its construction is designed by varying the type of fiber (e.g. polyester, carbon, Kevlar®, Spectra® or Innegral(TradeMark) and combinations thereof), the aerogel panel type and thickness, and overall layup configuration. The combination and design of materials may be customized and tailored to achieve a range of desired properties in the resulting laminate system. Multi-functional properties include structural strength, impact resistance, reduction in heat transfer, increased fire resistance, mechanical energy absorption, and acoustic energy dampening. Applications include aerospace, aircraft, automotive, boating, building and construction, lightweight portable structures, liquefied natural gas, cryogenics, transportation and energy, sporting equipment, and military protective gear industries.

  4. Understanding Thermal Transport in Graded, Layered and Hybrid Materials

    Science.gov (United States)

    2014-04-01

    Trindade B, Weißgärber T, Kieback B (2008) Mater Sci Eng A 475:39-44. 11 Schubert T, Ciupiński Ł, Zieliński W, Michalski A, Weißgärber T, Kieback B (2008...2011) 1097–1100. 14 Ł. Ciupiński, D. Siemiaszko, M. Rosiński, A. Michalski and K.J. Kurzydłowski, Advanced Materials Research Vol. 59 (2009) pp 120...Trindade B, Weißgärber T, Kieback B (2008) Mater Sci Eng A 475:39-44. 18 Schubert T, Ciupiński Ł, Zieliński W, Michalski A, Weißgärber T, Kieback B (2008

  5. Preparation of ZnO/CdS/BC Photocatalyst Hybrid Fiber and Research of Its Photocatalytic Properties

    Directory of Open Access Journals (Sweden)

    Beibei Dai

    2015-01-01

    Full Text Available An environment-friendly biomaterial bacterial cellulose (BC is introduced to substitute general organic polymers to assist the preparation of ZnO/CdS/BC photocatalyst hybrid nanofiber through coprecipitation method under the low-temperature condition. The XRD, XPS, and SEM results show that high load of ZnO/CdS/BC ternary hybrid fiber can be produced. TGA curves scan shows that ZnO/CdS/BC hybrid fiber has better thermal properties than bacterial cellulose. The UV-Vis spectra of the ZnO/CdS/BC hybrid nanofiber (0, 10, 20, and 50 wt%, resp. show that photocatalytic activities of ZnO/CdS/BC are influenced by the added amount of CdS. The degradation curve of methyl shows that ZnO/CdS/BC nanohybrid fibers exhibit excellent photocatalytic efficiency.

  6. Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers prepared by atmospheric plasma treatment and electrospinning

    Science.gov (United States)

    Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers were prepared by atmospheric plasma treatment and electrospinning. Atmospheric helium plasma treatment was first used to reduce the silver nitrate precursor in pre-electrospinning solutions into metallic silver nanoparticles, foll...

  7. Retrospective study of trisomy 18 in chorionic villi with fluorescent in situ hybridization on archival direct preparations

    NARCIS (Netherlands)

    A.R.M. van Opstal (Diane); C.D.F. van den Berg (Cardi); M.G. Jahoda (M.); H. Brandenburg (Helen); F.J. Los; P.A. In't Veld (Peter)

    1995-01-01

    textabstractTrisomy 18 in direct chorionic villus preparations needs further investigation since the chromosome abnormality may be confined to the placenta and may not represent the actual fetal karyotype. We performed, retrospectively, fluorescent in situ hybridization (FISH) with the chromosome 18

  8. Sustainable hybrid photocatalysts: titania immobilized on carbon materials derived from renewable and biodegradable resources

    Science.gov (United States)

    This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientifi...

  9. Sustainable hybrid photocatalysts: titania immobilized on carbon materials derived from renewable and biodegradable resources

    Science.gov (United States)

    This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientifi...

  10. Evaluation of rheological behavior of 10W40 lubricant containing hybrid nano-material by measuring dynamic viscosity

    Science.gov (United States)

    Ahmadi Nadooshan, Afshin; Hemmat Esfe, Mohammad; Afrand, Masoud

    2017-08-01

    In the present paper, the dynamic viscosity of 10W40 lubricant containing hybrid nano-materials has been examined. Hybrid nano-materials were composed of 90% of silica (SiO2) with 20-30 nm mean particle size and 10% of multi-walled carbon nanotubes (MWCNTs) with inner diameter of 2-6 nm and outer diameter of 5-20 nm. Nano-lubricant samples were prepared by two-step method with solid volume fractions of 0.05%, 0.1%, 0.25%, 0.5%, 0.75% and 1%. Dynamic viscosity of the samples was measured at temperatures between 5 and 55 °C and at shear rates of 666.5 s-1 up to 11,997 s-1. Experimental results indicated that the nano-lubricant had non-Newtonian behavior at all temperatures, while 10w40 oil was non-Newtonian only at high temperatures. With the use of the curve fitting technique of experimental data, power law and consistency indexes were obtained; furthermore, these coefficients were assessed by shear stress and viscosity diagram.

  11. Effects of the LiFePO4 content and the preparation method on the properties of (LiFePO4+AC/Li4Ti5O12 hybrid battery–capacitors

    Directory of Open Access Journals (Sweden)

    XUE BU HU

    2010-09-01

    Full Text Available Two composite cathode materials containing LiFePO4 and activated carbon (AC were synthesized by an in-situ method and a direct mixing technique, which are abbreviated as LAC and DMLAC, respectively. Hybrid battery–capacitors LAC/Li4Ti5O12 and DMLAC/Li4Ti5O12 were then assembled. The effects of the content of LiFePO4 and the preparation method on the cyclic voltammograms, the rate of charge–discharge and the cycle performance of the hybrid battery–capacitors were investigated. The results showed the overall electrochemical performance of the hybrid battery–capacitors was the best when the content of LiFePO4 in the composite cathode materials was in the range from 11.8 to 28.5 wt. %, while the preparation method had almost no impact on the electrochemical performance of the composite cathodes and hybrid battery–capacitors. Moreover, the hybrid battery–capacitor devices had a good cycle life performance at high rates. After 1000 cycles, the capacity loss of the DMLAC/Li4Ti5O12 hybrid battery–capacitor device at 4C was no more than 4.8 %. Moreover, the capacity loss would be no more than 9.6 % after 2000 cycles at 8C.

  12. SYNTHESIS AND BIOTECHNOLOGICAL APPLICATIONS OF VINYL POLYMER-INORGANIC HYBRID AND MESOPOROUS MATERIALS

    Institute of Scientific and Technical Information of China (English)

    Yen Wei; Kun-yuan Qiu

    2000-01-01

    We describe the sol-gel synthesis of a new family of organic-inorganic hybrid materials, in which various vinyl polymers are covalently bonded to and uniformly distributed in inorganic oxide matrices. The materials can be tailored to have both good toughness and hardness while maintaining excellent optical transparency. Doping the sol-gel metal oxides with optically active compounds such as D-glucose results in new optical rotatory composite materials. Removal of the dopant compounds from the composites affords mesoporous oxide materials, which represents a new, nonsurfactant-templated route to mesoporous molecular sieves. We have successfully immobilized a series of enzymes and other bioactive agents in mesoporous materials. Catalytical activities of the enzyme encapsulated in mesoporous materials were found to be much higher than those encapsulated in microporous materials.

  13. Novel Na2Mo4O13/α-MoO3 hybrid material as highly efficient CWAO catalyst for dye degradation at ambient conditions

    Science.gov (United States)

    Zhang, Zhang; Yang, Ruoyan; Gao, Yanshan; Zhao, Yufei; Wang, Junyang; Huang, Liang; Guo, Jiang; Zhou, Tuantuan; Lu, Peng; Guo, Zhanhu; Wang, Qiang

    2014-10-01

    We report a novel hybrid material Na2Mo4O13/α-MoO3 as highly efficient catalytic wet air oxidation (CWAO) catalyst, which showed the highest ever activity at room temperature and atmosphere pressure for the degradation of cationic red GTL. SEM and TEM analyses indicated that this hybrid catalyst has bamboo-shaped nanofiber morphology. In view of practical applications, the influence of some key parameters including operation temperature, catalyst calcination temperature, and the volume of dye wastewater have been optimized. The mechanism for the superior catalytic performance was investigated. XRD, XPS, and ESR suggested the Na2Mo4O13/α-MoO3 hybrid catalyst possesses more O2- ions in the oxygen deficient regions than neat α-MoO3, promoting the formation of active .OH radicals and resulting in a higher activity. Considering the facile preparation and its superior activity, this novel catalyst is promising for practical dye wastewater treatment.

  14. Organic-inorganic Hybrids Towards the Preparation of Nanoporous Composite Thin Films for Microelectronic Application

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Silicon containing materials have traditionally been used in microelectronic fabrication. Semiconductor devices often have one or more arrays of patterned interconnect levels that serve to electrically couple the individual circuit elements forming an integrated circuit. These interconnect levels are typically separated by an insulating or dielectric film. Previously, a silicon oxide film was the most commonly used material for such dielectric films having dielectric constants(k) near 4. 0. However, as the feature size is continuously scaling down, the relatively high k of such silicon oxide films became inadequate to provide efficient electrical insulation. As such, there has been an increasing market demand for materials with even lower dielectric constant for Interlayer Dielectric (ILD) applications, yet retaining thermal and mechanical integrity. We wish to report here our investigations on the preparation of ultra-low k ILD materials using a sacrificial approach whereby organic groups are burnt out to generate low k porous ORMOSIL films. We have been able to prepare a variety of organically modified silicone resins leading to highly microporous thin films, exhibiting ultra-low k from 1.80 to 2.87, and good to high modulus, 1.5 to 5.5 Gpa. Structure property influences on porosity, dielectric constant and modulus will be discussed.

  15. Effect of Different Structural Materials on Neutronic Performance of a Hybrid Reactor

    Science.gov (United States)

    Übeyli, Mustafa; Tel, Eyyüp

    2003-06-01

    Selection of structural material for a fusion-fission (hybrid) reactor is very important by taking into account of neutronic performance of the blanket. Refractory metals and alloys have much higher operating temperatures and neutron wall load (NWL) capabilities than low activation materials (ferritic/martensitic steels, vanadium alloys and SiC/SiC composites) and austenitic stainless steels. In this study, effect of primary candidate refractory alloys, namely, W-5Re, T111, TZM and Nb-1Zr on neutronic performance of the hybrid reactor was investigated. Neutron transport calculations were conducted with the help of SCALE 4.3 System by solving the Boltzmann transport equation with code XSDRNPM. Among the investigated structural materials, tantalum had the worst performance due to the fact that it has higher neutron absorption cross section than others. And W-5Re and TZM having similar results showed the best performance.

  16. (Bio)hybrid materials based on optically active particles

    Science.gov (United States)

    Reitzig, Manuela; Härtling, Thomas; Opitz, Jörg

    2014-03-01

    In this contribution we provide an overview of current investigations on optically active particles (nanodiamonds, upconversion phospors) for biohybrid and sensing applications. Due to their outstanding properties nanodiamonds gain attention in various application elds such as microelectronics, optical monitoring, medicine, and biotechnology. Beyond the typical diamond properties such as high thermal conductivity and extreme hardness, the carbon surface and its various functional groups enable diverse chemical and biological surface functionalization. At Fraunhofer IKTS-MD we develop a customization of material surfaces via integration of chemically modi ed nanodiamonds at variable surfaces, e.g bone implants and pipelines. For the rst purpose, nanodiamonds are covalently modi ed at their surface with amino or phosphate functionalities that are known to increase adhesion to bone or titanium alloys. The second type of surface is approached via mechanical implementation into coatings. Besides nanodiamonds, we also investigate the properties of upconversion phosphors. In our contribution we show how upconversion phosphors are used to verify sterilization processes via a change of optical properties due to sterilizing electron beam exposure.

  17. Photonic devices based on black phosphorus and related hybrid materials

    Science.gov (United States)

    Vitiello, M. S.; Viti, L.

    2016-08-01

    Artificial semiconductor heterostructures played a pivotal role in modern electronic and photonic technologies, providing a highly effective means for the manipulation and control of carriers, from the visible to the far-infrared, leading to the development of highly efficient devices like sources, detectors and modulators. The discovery of graphene and the related fascinating capabilities have triggered an unprecedented interest in devices based on inorganic two-dimensional (2D) materials. Amongst them, black phosphorus (BP) recently showed an extraordinary potential in a variety of applications across micro-electronics and photonics. With an energy gap between the gapless graphene and the larger gap transition metal dichalcogenides, BP can form the basis for a new generation of high-performance photonic devices that could be specifically engineered to comply with different applications, like transparent saturable absorbers, fast photocounductive switches and low noise photodetectors, exploiting its peculiar electrical, thermal and optical anisotropy. This paper will review the latest achievements in black-phosphorus-based THz photonics and discuss future perspectives of this rapidly developing research field.

  18. Glassy Carbon Coating Deposited on Hybrid Structure of Composite Materials

    Directory of Open Access Journals (Sweden)

    Posmyk A.

    2016-06-01

    Full Text Available This paper presents a method of production metal matrix composites with aluminum oxide foam covered by glassy carbon layer used as reinforcement. The glassy carbon coating was formed for decreasing of friction coefficient and reducing the wear. In first step of technology liquid glassy carbon precursor is on ceramic foam deposited, subsequently cured and carbonated at elevated temperature. In this way ceramic foam is covered with glassy carbon coating with thickness of 2-8 μm. It provides desirable amount of glassy carbon in the structure of the material. In the next step, porous spheres with carbon coating are infiltrated by liquid matrix of Al-Cu-Mg alloy. Thereby, equable distribution of glassy carbon in composite volume is achieved. Moreover, typical problems for composites reinforced by particles like sedimentation, agglomeration and clustering of particles are avoided. Tribological characteristics during friction in air versus cast iron as a counterpart were made. Produced composites with glassy carbon layer are characterised by friction coefficient between 0.08-0.20, thus meeting the typical conditions for solid lubricants.

  19. Nanostructured Wood Hybrids for Fire-Retardancy Prepared by Clay Impregnation into the Cell Wall.

    Science.gov (United States)

    Fu, Qiliang; Medina, Lilian; Li, Yuanyuan; Carosio, Federico; Hajian, Alireza; Berglund, Lars A

    2017-09-14

    Eco-friendly materials need "green" fire-retardancy treatments, which offer opportunity for new wood nanotechnologies. Balsa wood (Ochroma pyramidale) was delignified to form a hierarchically structured and nanoporous scaffold mainly composed of cellulose nanofibrils. This nanocellulosic wood scaffold was impregnated with colloidal montmorillonite clay to form a nanostructured wood hybrid with high flame-retardancy. The nanoporous scaffold was characterized by scanning electron microscopy and gas adsorption. Flame-retardancy was evaluated by cone calorimetry, whereas thermal and thermo-oxidative stabilities were assessed by thermogravimetry. The location of well-distributed clay nanoplatelets inside the cell walls was confirmed by energy-dispersive X-ray analysis. This unique nanostructure dramatically increased the thermal stability because of thermal insulation, oxygen depletion, and catalytic charring effects. A coherent organic/inorganic charred residue was formed during combustion, leading to a strongly reduced heat release rate peak and reduced smoke generation.

  20. Preparation of homogeneous vitreous materials for electronic and optical devices

    Science.gov (United States)

    Gatos, H. C.; Platakis, N. S.; Witt, A. F.

    1971-01-01

    Vitreous material builds up as series of solidified layers on inside walls of sealed quartz ampoule containing molten constituents of material, and forms well defined shapes to close dimensional tolerances. Ampoules are made of material which does not react with melt and has lower thermal expansion coefficient than solidified layer.

  1. Single step hydrothermal synthesis of carbon nanodot decorated V2O5 nanobelts as hybrid conducting material for supercapacitor application

    Science.gov (United States)

    Narayanan, Remya

    2017-09-01

    Carbon nanodot (C-dot) decorated V2O5 (C-dot@V2O5) nanobelts are synthesized by single step, low cost hydrothermal route at low temperature by using V2O5 and glucose as precursors. We have not added any extra organic solvents or surfactants which are commonly used for the preparation of different nanostructures of V2O5. Electron microscopy analyses demonstrate that C-dot is entrapped inside V2O5 nanobelts which in turn enhance the conductivity and ion propagation property of this composite material. The C-dot@V2O5 nanobelts exhibit an excellent three electrode electrochemical performance in 1 M Na2SO4 and which showed a specific capacitance of 270 F g-1 at 1 A g-1, which is 4.5 times higher than the pristine V2O5 electrode. The electrochemical energy storage capacity of this hybrid is investigated towards solid state supercapacitor application also for the first time by employing electrophoretically deposited C-dot as the counter electrode and Li based gel as the electrolyte. The hybrid material delivers an energy density of 60 W h kg-1 and a reasonably high power density of 4.1 kW kg-1 at 5 A g-1 and good cycling stability and capacitance retention of about 87% was observed even after 5000 cycles. Above mentioned results clearly show that C-dot embedded hybrid, nanostructured transition metal oxides has great potential towards fabrication of electrodes for energy storage devices.

  2. Preparation and characterization of an organic/inorganic hybrid sorbent (PLE) to enhance selectivity for As(V).

    Science.gov (United States)

    An, Byungryul; Kim, Hakchan; Park, Chanhyuk; Lee, Sang-Hyup; Choi, Jae-Woo

    2015-05-30

    For the selective removal of arsenate (As(V)) a hybrid sorbent was prepared using a non-toxic natural organic material, chitosan, by loading a transition metal, nickel. The immobilization of nickel was achieved by coordination with a deprotonated amino group (NH2) in the chitosan polymer chain. The amount of nickel was directly correlated to the presence of the amino group and was calculated to be 62 mg/g. FTIR spectra showed a peak shift from 1656 to 1637 cm(-1) after Ni(2+) loading, indicating the complexation between the amino group and nickel, and a peak of As(V) was observed at 834 cm(-1). An increase of sulfate concentration from 100 mg/L to 200 mg/L did not significantly affect As(V) sorption, and an increase in the concentration of bicarbonate reduced the As(V) uptake by 33%. The optimal pH of the solution was determined at pH 10, which is in accordance with the fraction of HAsO4(2-) and AsO4(-3). According to a fixed column test, a break through behavior of As(V) revealed that selectivity for As(V) was over sulfate. Regeneration using 5% NaCl extended the use of sorbent to up to uses without big loss of sorption capacity. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Nitrogen-doped carbon/graphene hybrid anode material for sodium-ion batteries with excellent rate capability

    Science.gov (United States)

    Liu, Huan; Jia, Mengqiu; Cao, Bin; Chen, Renjie; Lv, Xinying; Tang, Renjie; Wu, Feng; Xu, Bin

    2016-07-01

    Nitrogen-doped carbon/graphene (NCG) hybrid materials were prepared by an in-situ polymerization and followed pyrolysis for sodium-ion batteries. The NCG has a large interlayer distance (0.360 nm) and a high nitrogen content of 7.54 at%, resulting in a high reversible sodium storage capacity of 336 mAh g-1 at 30 mA g-1. The NCG shows a sandwich-like structure, i.e. nitrogen-doped carbon nanosheets closely coated on both sides of graphene. The carbon nanosheets shorten the ion diffusion distance, while the sandwiched graphene with high electronic conductivity guarantees fast electron transport, making the NCG exhibit excellent rate capability (94 mAh g-1 at 5 A g-1). It also exhibits good cycle stability with a capacity retention of 89% after 200 cycles at 50 mA g-1.

  4. Highly condensed fluorinated methacrylate hybrid material for transparent low-kappa passivation layer in LCD-TFT.

    Science.gov (United States)

    Oh, Ji-Hoon; Kwak, Seung-Yeon; Yang, Seung-Cheol; Bae, Byeong-Soo

    2010-03-01

    Photocurable and highly condensed fluorinated methacrylate oligosiloxane, with a low dielectric constant (kappa = 2.54), was prepared by a nonhydrolytic sol-gel condensation reaction. The oligosiloxane resin was then spin-coated, photocured, and thermally baked in order to fabricate a fluorinated methacrylate hybrid material (FM hybrimer) thin film. This study investigated the application of this FM hybrimer film as a low-kappa passivation layer in LCD-based thin film transistors (TFT). It was found that a dielectric constant as low as kappa = 2.54 could be obtained, without introducing pores in the dense FM hybrimer films. This study compares FM hybrimer film characteristics with those required for passivation layers in LCD-TFTs, including thermal stability, optical transmittance, hydrophobicity, gap fill, and planarization effects as well as electrical insulation.

  5. Reaction of Silane Alkoxide with Acid Anhydride as a Novel Synthetic Method for Organic-Inorganic Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    Masahiro Fujiwara

    2005-01-01

    @@ 1Introduction Sol-gel method is a potent method to produce new inorganic and organic-inorganic hybrid materials. The key step of this methodology is the hydrolysis of a metal alkoxide or other metal substrates such as acetylacetonates to form hydroxyl metal species, followed by their condensation to metal-oxygen-metal (M - O - M)bonds. In this process, the utilization of water, generally in excess, is essential and alcoholic solvents such as ethanol are often required to homogenize the solution when organic compounds coexist. As the common sol-gel method using water allows for limited uses of organic substrates due to their low solubility and stability in aqueous solution, modified variations of sol-gel method are required. Recently, some processes were reported for preparing metal oxides from metal alkoxides without the utilization of water.

  6. Coumarin-based fluorescence hybrid silica material used for selective detection and absorption of Hg2+ in aqueous media

    Science.gov (United States)

    Meng, Qingtao; Jia, Hongmin; Wang, Cuiping; Zhao, Hongbin; Lu, Gonghao; Hu, Zhizhi; Zhang, Zhiqiang; Duan, Chunying

    2014-11-01

    An inorganic-organic hybrid fluorescence material (C-SBA-15) was prepared by covalent immobilization of a coumarin derivative within the channels of SBA-15. The characterization results of XRD, TEM micrographs, FT-IR and UV-vis demonstrate that coumarin is successfully grafted onto the inner surface of SBA-15 and its organized structure is preserved. C-SBA-15 can detect Hg2+ with high selectivity to Pb2+, Zn2+, Cu2+, Mn2+, Cd2+, Co2+, Ag+, Fe3+, Ni2+, K+, Na+, Ca2+, Mg2+ and Li+ in water. Furthermore, the fluorogenical response is reversible by treating with EDTA and do not vary over a broad pH range (5.0-10.5). C-SBA-15 features more outstanding absorbing capacity for Hg2+ among other HTM ions in water.

  7. Preparation of two biological reference materials for QUASIMEME inter-laboratory testing

    NARCIS (Netherlands)

    Lohman, M.; Korytar, P.

    2007-01-01

    Two biological materials have been prepared for the Institute for Environmental Studies (IVM), Free University, Amsterdam to be used in QUASIMEME interlaboratory studies. The materials prepared are: 300 tins of homogenized blue mussels from the Waddenzee (QO07-1) and 300 tins of homogenized shrimps

  8. Hybrid micro-/nano-structures derived from metal-organic frameworks: preparation and applications in energy storage and conversion.

    Science.gov (United States)

    Cao, Xiehong; Tan, Chaoliang; Sindoro, Melinda; Zhang, Hua

    2017-05-22

    Metal-organic frameworks (MOFs), an important class of inorganic-organic hybrid crystals with intrinsic porous structures, can be used as versatile precursors or sacrificial templates for preparation of numerous functional nanomaterials for various applications. Recent developments of MOF-derived hybrid micro-/nano-structures, constructed by more than two components with varied functionalities, have revealed their extensive capabilities to overcome the weaknesses of the individual counterparts and thus give enhanced performance for energy storage and conversion. In this tutorial review, we summarize the recent advances in MOF-derived hybrid micro-/nano-structures. The synthetic strategies for preparing MOF-derived hybrid micro-/nano-structures are first introduced. Focusing on energy storage and conversion, we then discuss their potential applications in lithium-ion batteries, lithium-sulfur batteries, supercapacitors, lithium-oxygen batteries and fuel cells. Finally, we give our personal insights into the challenges and opportunities for the future research of MOF-derived hybrid micro-/nano-structures.

  9. PDMS-SiO{sub 2}-TiO{sub 2}-CaO hybrid materials – Cytocompatibility and nanoscale surface features

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, J. Carlos [CICECO - Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Wacha, András [Research Centre for Natural Sciences, Hungarian Academy of Sciences, Magyar Tudósok körútja 2, Budapest 1117 (Hungary); Gomes, Pedro S.; Fernandes, M. Helena R. [Laboratory for Bone Metabolism and Regeneration, Faculdade de Medicina Dentária, Universidade do Porto (Portugal); Fernandes, M. Helena Vaz [CICECO - Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal); Salvado, Isabel M. Miranda, E-mail: isabelmsalvado@ua.pt [CICECO - Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro (Portugal)

    2016-07-01

    Two PDMS-SiO{sub 2}-TiO{sub 2}-CaO porous hybrid materials were prepared using the same base composition, precursors, and solvents, but following two different sol-gel procedures, based on the authors' previous works where for the first time, in this hybrid system, calcium acetate was used as calcium source. The two different procedures resulted in monolithic materials with different structures, microstructures, and surface wettability. Even though both are highly hydrophobic (contact angles of 127.2° and 150.6°), and present different filling regimes due to different surface topographies, they have demonstrated to be cytocompatible when tested with human osteoblastic cells, against the accepted idea that high-hydrophobic surfaces are not suitable to cell adhesion and proliferation. At the nanoscale, the existence of hydrophilic silica domains containing calcium, where water molecules are physisorbed, is assumed to support this capability, as discussed. - Highlights: • Two hybrid materials were prepared following two different sol-gel procedures. • Both are highly hydrophobic but demonstrated to be cytocompatible. • Different filling regimes were observed.

  10. Second sphere coordination of hybrid metal-organic materials: solid state reactivity.

    Science.gov (United States)

    Guo, Fang; Martí-Rujas, Javier

    2016-09-21

    When compared to other hybrid metal organic materials such as metal-organic frameworks, hydrogen bonded materials self-assembled by metals and organic molecules using second sphere interactions have been poorly investigated. Consequently, their solid-sate properties are also scarce. In this perspective, earlier research mainly on host-guest chemistry and its evolution towards more extended structures by applying crystal engineering principles using second sphere coordination is described. Crystal-to-crystal guest exchange reactions, permanently porous hybrid metal organic materials, mechanochemical reactivity, thermally induced phase transformations as well as some examples of functional technological applications using second sphere adducts such as gas adsorption, separation and non-linear optical phenomena are also reported. Although some tutorial reviews on second sphere adducts have been conducted mainly in the solution state focusing on metal based anion receptors, to the best of our knowledge, an overview on relevant works that focus on the solid-state properties has not been carried out. The aim of this article is to highlight from some of the early fundamental work to the latest reports on hybrid metal-organic materials self-assembled via second sphere interactions with a focus on solid-state chemistry.

  11. Integrated ion sensor device applications based on printed hybrid material systems (Conference Presentation)

    Science.gov (United States)

    List-Kratochvil, Emil J. W.

    2016-09-01

    Comfortable, wearable sensors and computers will enhance every person's awareness of his or her health condition, environment, chemical pollutants, potential hazards, and information of interest. In agriculture and in the food industry there is a need for a constant control of the condition and needs of plants, animals, and farm products. Yet many of these applications depend upon the development of novel, cheap devices and sensors that are easy to implement and to integrate. Organic semiconductors as well as several inorganic materials and hybrid material systems have proven to combine a number of intriguing optical and electronic properties with simple processing methods. As it will be reviewed in this contribution, these materials are believed to find their application in printed electronic devices allowing for the development of smart disposable devices in food-, health-, and environmental monitoring, diagnostics and control, possibly integrated into arrays of sensor elements for multi-parameter detection. In this contribution we review past and recent achievements in the field. Followed by a brief introduction, we will focus on two topics being on the agenda recently: a) the use of electrolyte-gated organic field-effect transistor (EGOFET) and ion-selective membrane based sensors for in-situ sensing of ions and biological substances and b) the development of hybrid material based resistive switches and their integration into fully functional, printed hybrid crossbar sensor array structures.

  12. State of the art review on design and manufacture of hybrid biomedical materials: Hip and knee prostheses.

    Science.gov (United States)

    Bahraminasab, Marjan; Farahmand, Farzam

    2017-09-01

    The trend in biomaterials development has now headed for tailoring the properties and making hybrid materials to achieve the optimal performance metrics in a product. Modern manufacturing processes along with advanced computational techniques enable systematical fabrication of new biomaterials by design strategy. Functionally graded materials as a recent group of hybrid materials have found numerous applications in biomedical area, particularly for making orthopedic prostheses. This article, therefore, seeks to address the following research questions: (RQ1) What is the desired structure of orthopedic hybrid materials? (RQ2) What is the contribution of the literature in the development of hybrid materials in the field of orthopedic research? (RQ3) Which type of manufacturing approaches is prevalently used to build these materials for knee and hip implants? (RQ4) Is there any inadequacy in the methods applied?

  13. Controllable synthesis, magnetism and solubility enhancement of graphene nanosheets/magnetite hybrid material by covalent bonding.

    Science.gov (United States)

    Zhan, Yingqing; Yang, Xulin; Meng, Fanbin; Wei, Junji; Zhao, Rui; Liu, Xiaobo

    2011-11-01

    Hybrids of Fe(3)O(4) nanoparticles and surface-modified graphene nanosheets (GNs) were synthesized by a two-step process. First, graphene nanosheets were modified by SOCl(2) and 4-aminophenoxyphthalonitrile to introduce nitrile groups on their surface. Second, the nitrile groups of surface-modified graphene nanosheets were reacted with ferric ions on the surface of Fe(3)O(4) with the help of relatively high boiling point solvent ethylene glycol to form a GNs/Fe(3)O(4) hybrid. The covalent attachment of Fe(3)O(4) nanoparticles on the graphene nanosheet surface was confirmed by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectrometer (EDS) and scanning electron microscopy (SEM). TEM and HRTEM observations indicated that the sizes of the nanoparticles and their coverage density on GNs could be easily controlled by changing the concentration of the precursor and the weight ratio to GNs. Magnetic measurements showed that magnetization of the hybrid materials is strongly influenced by the reaction conditions. Chemically bonded by phthalocyanine, the solubility of as-synthesized GNs/Fe(3)O(4) hybrid materials was greatly enhanced, which was believed to have potential for applications in the fields of composites, wastewater treatment and biomaterials.

  14. Two-dimensional magnetic modeling of ferromagnetic materials by using a neural networks based hybrid approach

    Energy Technology Data Exchange (ETDEWEB)

    Cardelli, E.; Faba, A. [Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia (Italy); Laudani, A.; Lozito, G.M.; Riganti Fulginei, F.; Salvini, A. [Department of Engineering, Roma Tre University, Via V. Volterra 62, 00146 Rome (Italy)

    2016-04-01

    This paper presents a hybrid neural network approach to model magnetic hysteresis at macro-magnetic scale. That approach aims to be coupled together with numerical treatments of magnetic hysteresis such as FEM numerical solvers of the Maxwell's equations in time domain, as in case of the non-linear dynamic analysis of electrical machines, and other similar devices, allowing a complete computer simulation with acceptable run times. The proposed Hybrid Neural System consists of four inputs representing the magnetic induction and magnetic field components at each time step and it is trained by 2D and scalar measurements performed on the magnetic material to be modeled. The magnetic induction B is assumed as entry point and the output of the Hybrid Neural System returns the predicted value of the field H at the same time step. Within the Hybrid Neural System, a suitably trained neural network is used for predicting the hysteretic behavior of the material to be modeled. Validations with experimental tests and simulations for symmetric, non-symmetric and minor loops are presented.

  15. One-Dimensional Dielectric/Metallic Hybrid Materials for Photonic Applications.

    Science.gov (United States)

    Li, Yong Jun; Xiong, Xiao; Zou, Chang-Ling; Ren, Xi Feng; Zhao, Yong Sheng

    2015-08-01

    Explorations of 1D nanostructures have led to great progress in the area of nanophotonics in the past decades. Based on either dielectric or metallic materials, a variety of 1D photonic devices have been developed, such as nanolasers, waveguides, optical switches, and routers. What's interesting is that these dielectric systems enjoy low propagation losses and usually possess active optical performance, but they have a diffraction-limited field confinement. Alternatively, metallic systems can guide light on deep subwavelength scales, but they suffer from high metallic absorption and can work as passive devices only. Thus, the idea to construct a hybrid system that combines the merits of both dielectric and metallic materials was proposed. To date, unprecedented optical properties have been achieved in various 1D hybrid systems, which manifest great potential for functional nanophotonic devices. Here, the focus is on recent advances in 1D dielectric/metallic hybrid systems, with a special emphasis on novel structure design, rational fabrication techniques, unique performance, as well as their wide application in photonic components. Gaining a better understanding of hybrid systems would benefit the design of nanophotonic components aimed at optical information processing.

  16. Preparation of Wear Resistant Materials by Melting and Diffusion Process

    Institute of Scientific and Technical Information of China (English)

    YU Shihao; WEI Xueping; ZENG Hui

    2012-01-01

    A wear-resistant material reinforced with VCp was manufactured by the in-mold melting process,in which the high-vanadium alloy-rods were melted by high temperature liquid steel and elements diffused into the liquid.Microstructure of the material was examined by OM,SEM,and XRD,and alloy elements in the diffusion layer were studied by EDS,and the hardness of the material was tested by HRS.The experimental results show that the material gradually changes hardness,which is due to the uniformly existents of carbide particles on martensite matrix and the gradient distribution of vanadium and carbide.

  17. Preparation of Poly (ethylene oxide) (PEO) Modified Tungsten Oxide Hybrid Films via Sol-Gel Processing

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Poly (ethylene axide) (PEO) modified WO3 thin films were prepared on glass substrates with special temperature.The sol-gel transition proess was investigated by using DTA-TG,SEM and XRD.The electrochemical characteristic of the films was studied by cyclic voltmmetry measurement.The results show that PEO has heavy effects on the crystallization of WO3 during structure evolution because of the interaction between PEO and WO3.It increases the crystallization temperature of the gels and thus improves the electrochemical properties and cyclic life of WO3 film as electrochromic materials.

  18. Enhancing the piezoelectric properties of flexible hybrid AlN materials using semi-crystalline parylene

    Science.gov (United States)

    Jackson, Nathan; Mathewson, Alan

    2017-04-01

    Flexible piezoelectric materials are desired for numerous applications including biomedical, wearable, and flexible electronics. However, most flexible piezoelectric materials are not compatible with CMOS fabrication technology, which is desired for most MEMS applications. This paper reports on the development of a hybrid flexible piezoelectric material consisting of aluminium nitride (AlN) and a semi-crystalline polymer substrate. Various types of semi-crystalline parylene and polyimide materials were investigated as the polymer substrate. The crystallinity and surfaces of the polymer substrates were modified by micro-roughening and annealing in order to determine the effects on the AlN quality. The AlN crystallinity and piezoelectric properties decreased when the polymer surfaces were treated with O2 plasma. However, increasing the crystallinity of the parylene substrate prior to deposition of AlN caused enhanced c-axis (002) AlN crystallinity and piezoelectric response of the AlN. Piezoelectric properties of 200 °C annealed parylene-N substrate resulted in an AlN d 33 value of 4.87 pm V-1 compared to 2.17 pm V-1 for AlN on polyimide and 4.0 pm V-1 for unannealed AlN/parylene-N. The electrical response measurements to an applied force demonstrated that the parylene/AlN hybrid material had higher V pp (0.918 V) than commercial flexible piezoelectric material (PVDF) (V pp 0.36 V). The results in this paper demonstrate that the piezoelectric properties of a flexible AlN hybrid material can be enhanced by increasing the crystallinity of the polymer substrate, and the enhanced properties can function better than previous flexible piezoelectrics.

  19. Hybrid optical-thermal devices and materials for light manipulation and radiative cooling

    CERN Document Server

    Boriskina, Svetlana V; Hsu, Wei-Chun; Weinstein, Lee; Huang, Xiaopeng; Loomis, James; Xu, Yanfei; Chen, Gang

    2015-01-01

    We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna with sub-wavelength light focusing, which simultaneously enables intensity enhancement at the operating wavelength in the visible and reduction of the operating temperature. The enhancement is achieved via light recycling in the form of whispering-gallery modes trapped in an optical microcavity, while cooling functionality is realized via a combination of reduced optical absorption and radiative cooling. The other example is a fabric that is opaque in the visible range yet highly transparent in the infrared, which allows the human body to efficiently shed energy in the form of thermal emission. Such fabrics can find...

  20. Identification of defect-related emissions in ZnO hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Wei; Wang, Xuefeng, E-mail: xfwang@nju.edu.cn; Ye, Jiandong; Gu, Shulin; Shi, Yi; Zhang, Rong [National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, and School of Electronic Science and Engineering, Nanjing University, Nanjing 210093 (China); Zhu, Hao [National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, and Department of Physics, Nanjing University, Nanjing 210093 (China); Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Song, Fengqi [National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, and Department of Physics, Nanjing University, Nanjing 210093 (China); Zhou, Jianfeng [Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Xu, Yongbing [National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, and School of Electronic Science and Engineering, Nanjing University, Nanjing 210093 (China); Spintronics and Nanodevice Laboratory, Department of Electronics, University of York, York YO10 5DD (United Kingdom)

    2015-07-13

    ZnO hybrid materials with singly precipitated ZnO nanocrystals embedded in the glass surface were fabricated by melt-quenching method followed by the annealing process. A series of samples containing different densities and species of intrinsic defects were obtained under different annealing conditions in a controllable manner, which was an ideal platform to identify the complicated defect origins. By employing photoluminescence (PL), excitation-dependent PL, PL excitation (PLE), and Raman spectroscopy, the radiative transitions of visible emission bands at around 401, 490, and 528 nm were unambiguously involved with zinc interstitial-related defect levels as initial states, and the corresponding terminal states were suggested to be valence band, oxygen vacancies, and zinc vacancies, respectively. This study may deepen the fundamental understanding of defect-related emissions and physics in ZnO and benefit potential applications of ZnO hybrid materials in optoelectronics.

  1. Preparation and biological evaluations of PLA/chitosan composite materials

    Institute of Scientific and Technical Information of China (English)

    ZHOU Chang-ren; LI Lihua; DING Shan

    2001-01-01

    @@ INTRODUCTION Polylactic acid (PLA) is a biodegradable material that is hontoxic and biocompatible. However, as scaffold materials, PLA has several obvious weaknesses:biodegrading too fast, acidic degradation product, and hydrophobic. When PLA isplanted in the body, the degradation takes place synchronously.

  2. Method for the preparation of ferrous low carbon porous material

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Curtis Jack

    2014-05-27

    A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.

  3. Method for the preparation of ferrous low carbon porous material

    Science.gov (United States)

    Miller, Curtis Jack

    2014-05-27

    A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.

  4. Facile preparation of TiO{sub 2}–polyvinyl alcohol hybrid nanoparticles with improved visible light photocatalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Filippo, Emanuela [Department of Innovation Engineering, University of Salento, Monteroni Street, 73100, Lecce (Italy); Carlucci, Claudia; Capodilupo, Agostina Lina [National Nanotechnology Laboratory (NNL), Nanoscience Institure – CNR, Arnesano Street, 73100 Lecce (Italy); Perulli, Patrizia [Department of Innovation Engineering, University of Salento, Monteroni Street, 73100, Lecce (Italy); Conciauro, Francesca [National Nanotechnology Laboratory (NNL), Nanoscience Institure – CNR, Arnesano Street, 73100 Lecce (Italy); Corrente, Giuseppina Anna [University of Calabria, Pietro Bucci Street, 87036 Arcavacata di Rende, Cosenza (Italy); Gigli, Giuseppe [National Nanotechnology Laboratory (NNL), Nanoscience Institure – CNR, Arnesano Street, 73100 Lecce (Italy); Center for Biomolecular Nanotechnologies (CBN) of Italian Institute of Technology (IIT), Barsanti Street 1, 73010 Arnesano (Italy); Department of Physics, University of Salento, Monteroni Street, 73100, Lecce (Italy); Ciccarella, Giuseppe, E-mail: giuseppe.ciccarella@unisalento.it [Department of Innovation Engineering, University of Salento, Monteroni Street, 73100, Lecce (Italy); National Nanotechnology Laboratory (NNL), Nanoscience Institure – CNR, Arnesano Street, 73100 Lecce (Italy)

    2015-03-15

    Graphical abstract: - Highlights: • Hybrid TiO{sub 2}/PVA core/shell nanoparticles were prepared through a two step procedure. • TiO{sub 2}–PVA samples were prepared based on different TiO{sub 2}–PVA weight ratios. • All samples were characterized using XRD, TEM, FT-IR and BET analysis. • The photocatalytic performance was evaluated. - Abstract: Hybrid inorganic/organic core/shell nanoparticles were prepared through a two step synthesis procedure. In the first step, pure anatase TiO{sub 2} nanoparticles were synthesized though a rapid microwave assisted non-aqueous route. Then, the obtained titania nanoparticles were coated with polyvinyl alcohol (PVA) using a simple solution method followed by relatively low temperature treatment. The PVA-coated titania nanoparticles samples were prepared at different TiO{sub 2}–PVA weight ratio and they were characterized using X-Ray diffraction, transmission electron microscopy, infrared spectroscopy and Brunauer–Emmett–Teller (BET) analysis. Photocatalytic performance was also evaluated for all samples and the results indicated that TiO{sub 2}:PVA weight ratio was a key factor to obtain an improvement of the photocatalytic activity with respect to bare TiO{sub 2} nanoparticles, since PVA concentration influenced the surface area and the aggregation of nanoparticles and the thickness of the coating layer. This inexpensive system provides a simple, quick and effective approach which allows to obtain core/shell hybrid nanostructures.

  5. Large 2D-arrays of size-controllable silver nanoparticles prepared by hybrid deposition

    Science.gov (United States)

    Dieu Thuy Ung, Thi; Hoa Nguyen, Thi; Liem Nguyen, Quang

    2016-09-01

    Two main results are presented in this paper. (i) Silver nanoparticles (AgNPs) with uniform size-distribution and controllability in the range of 20-50 nm were synthesized by seeding and growing at ambient conditions. The single-crystal Ag nano-seeds were created by reduction of AgNO3 in presence of citrate surfactant at 70 °C. Then, importantly, the fresh AgCl precursor was used in the presence of polyvinylpyrrolidone to adjust the reaction rate with ascorbic acid to generate Ag for growing on the surface of single-crystal Ag nano-seeds. The AgNPs size could be well-controlled by varying the amount of Ag nano-seeds while keeping the AgCl precursor concentration to be constant. (ii) The large 2D-arrays with homogeneous and dense monolayers of AgNPs were prepared on ITO substrates by hybrid method, in which the key technological point is the surface functionalization of AgNPs using mixed alkanethiols (dodecanethiol:octadecanethiol = 6:1). We have used the fabricated 2D-arrays from the 50 nm AgNPs as a surface enhanced Raman scattering substrate to take the Raman scattering spectra of rhodamine B (RhB), glucose and viral pathogen (H5N1) at very low concentrations of 10-10 M, 10-12 M and 4 ng μl-1, respectively.

  6. Synthesis, characterization, and mercury adsorption properties of hybrid mesoporous aluminosilicate sieve prepared with fly ash.

    Science.gov (United States)

    Liu, Minmin; Hou, Li-An; Xi, Beidou; Zhao, Ying; Xia, Xunfeng

    2013-05-15

    A novel hybrid mesoporous aluminosilicate sieve (HMAS) was prepared with fly ash and impregnated with zeolite A precursors. This improved the mercury adsorption of HMAS compared to original MCM-41. The HMAS was characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, Fourier transform infrared (FTIR) analysis, transmission electron microscopy (TEM) images and (29)Si and (27)Al magic angle spinning nuclear magnetic resonance (MAS NMR) spectra. These showed that the HMAS structure was still retained after impregnated with zeolite A. But the surface area and pore diameter of HMAS decreased due to pore blockage. Adsorption of mercury from aqueous solution was studied on untreated MCM-41and HMAS. The mercury adsorption rate of HMAS was higher than that of origin MCM-41. The adsorption of mercury was investigated on HMAS regarding the pH of mercury solution, initial mercury concentration, and the reaction temperature. The experimental data fit well to Langmuir and Freundlich isotherm models. The Dublin-Radushkevich isotherm and the characterization show that the mercury adsorption on HMAS involved the ion-exchange mechanisms. In addition, the thermodynamic parameters suggest that the adsorption process was endothermic in nature. The adsorption of mercury on HMAS followed the first order kinetics.

  7. Synthesis, characterization, and mercury adsorption properties of hybrid mesoporous aluminosilicate sieve prepared with fly ash

    Science.gov (United States)

    Liu, Minmin; Hou, Li-an; Xi, Beidou; Zhao, Ying; Xia, Xunfeng

    2013-05-01

    A novel hybrid mesoporous aluminosilicate sieve (HMAS) was prepared with fly ash and impregnated with zeolite A precursors. This improved the mercury adsorption of HMAS compared to original MCM-41. The HMAS was characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, Fourier transform infrared (FTIR) analysis, transmission electron microscopy (TEM) images and 29Si and 27Al magic angle spinning nuclear magnetic resonance (MAS NMR) spectra. These showed that the HMAS structure was still retained after impregnated with zeolite A. But the surface area and pore diameter of HMAS decreased due to pore blockage. Adsorption of mercury from aqueous solution was studied on untreated MCM-41and HMAS. The mercury adsorption rate of HMAS was higher than that of origin MCM-41. The adsorption of mercury was investigated on HMAS regarding the pH of mercury solution, initial mercury concentration, and the reaction temperature. The experimental data fit well to Langmuir and Freundlich isotherm models. The Dublin-Radushkevich isotherm and the characterization show that the mercury adsorption on HMAS involved the ion-exchange mechanisms. In addition, the thermodynamic parameters suggest that the adsorption process was endothermic in nature. The adsorption of mercury on HMAS followed the first order kinetics.

  8. Synthesis, characterization, and mercury adsorption properties of hybrid mesoporous aluminosilicate sieve prepared with fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Minmin [School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai 200092 (China); Hou, Li-an, E-mail: 11liuminmin@tongji.edu.cn [School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai 200092 (China); Xi, Beidou; Zhao, Ying; Xia, Xunfeng [China Research Academy of Environmental Science, Beijing 200012 (China)

    2013-05-15

    A novel hybrid mesoporous aluminosilicate sieve (HMAS) was prepared with fly ash and impregnated with zeolite A precursors. This improved the mercury adsorption of HMAS compared to original MCM-41. The HMAS was characterized by X-ray diffraction (XRD), nitrogen adsorption–desorption, Fourier transform infrared (FTIR) analysis, transmission electron microscopy (TEM) images and {sup 29}Si and {sup 27}Al magic angle spinning nuclear magnetic resonance (MAS NMR) spectra. These showed that the HMAS structure was still retained after impregnated with zeolite A. But the surface area and pore diameter of HMAS decreased due to pore blockage. Adsorption of mercury from aqueous solution was studied on untreated MCM-41and HMAS. The mercury adsorption rate of HMAS was higher than that of origin MCM-41. The adsorption of mercury was investigated on HMAS regarding the pH of mercury solution, initial mercury concentration, and the reaction temperature. The experimental data fit well to Langmuir and Freundlich isotherm models. The Dublin–Radushkevich isotherm and the characterization show that the mercury adsorption on HMAS involved the ion-exchange mechanisms. In addition, the thermodynamic parameters suggest that the adsorption process was endothermic in nature. The adsorption of mercury on HMAS followed the first order kinetics.

  9. Optically active substituted polyacetylene@carbon nanotube hybrids: Preparation, characterization and infrared emissivity property study

    Energy Technology Data Exchange (ETDEWEB)

    Bu, Xiaohai; Zhou, Yuming, E-mail: ymzhou@seu.edu.cn; Zhang, Tao; Wang, Yongjuan; Zhang, Zewu; He, Man

    2014-08-15

    Optically active substituted polyacetylene@multiwalled carbon nanotubes (SPA@MWCNTs) nanohybrids were fabricated by wrapping helical SPA copolymers onto the surface of modified nanotubes through ester bonding linkage. SPA copolymer based on chiral phenylalanine and serine was pre-polymerized by a rhodium zwitterion catalyst in THF, and evidently proved to possess strong optical activity and adopt a predominately one-handed helical conformation. Various characterizations including Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and transmission electron microscopy (TEM) demonstrated that the SPA had been covalently grafted onto the nanotubes without destroying their original graphite structure. The wrapped SPA was found to exhibit an enhancement in thermal stability and still maintained considerable optical activity after grafting. The infrared emissivity property of the nanohybrids at 8–14 μm was investigated in addition. The results indicated that the SPA@MWCNTs hybrid matrix could possess a much lower infrared emissivity value (ε=0.707) than raw MWCNTs, which might be due to synergistic effect of the unique helical conformation of optically active SPA and strengthened interfacial interaction between the organic polymers and inorganic nanoparticles. - Graphical abstract: Optically active SPA@MWCNTs nanohybrids with low infrared emissivity. - Highlights: • Synthesis of optically active SPA copolymer derived from serine and phenylalanine. • Preparation and characterization of optically active SPA@MWCNTs nanohybrids. • Application study of the SPA@MWCNTs nanohybrids (ε=0.707) in lowering the infrared emissivity.

  10. Photodetectors based on graphene, other two-dimensional materials and hybrid systems.

    Science.gov (United States)

    Koppens, F H L; Mueller, T; Avouris, Ph; Ferrari, A C; Vitiello, M S; Polini, M

    2014-10-01

    Graphene and other two-dimensional materials, such as transition metal dichalcogenides, have rapidly established themselves as intriguing building blocks for optoelectronic applications, with a strong focus on various photodetection platforms. The versatility of these material systems enables their application in areas including ultrafast and ultrasensitive detection of light in the ultraviolet, visible, infrared and terahertz frequency ranges. These detectors can be integrated with other photonic components based on the same material, as well as with silicon photonic and electronic technologies. Here, we provide an overview and evaluation of state-of-the-art photodetectors based on graphene, other two-dimensional materials, and hybrid systems based on the combination of different two-dimensional crystals or of two-dimensional crystals and other (nano)materials, such as plasmonic nanoparticles, semiconductors, quantum dots, or their integration with (silicon) waveguides.

  11. Hybrid bandgap engineering for super-hetero-epitaxial semiconductor materials, and products thereof

    Science.gov (United States)

    Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor)

    2012-01-01

    "Super-hetero-epitaxial" combinations comprise epitaxial growth of one material on a different material with different crystal structure. Compatible crystal structures may be identified using a "Tri-Unity" system. New bandgap engineering diagrams are provided for each class of combination, based on determination of hybrid lattice constants for the constituent materials in accordance with lattice-matching equations. Using known bandgap figures for previously tested materials, new materials with lattice constants that match desired substrates and have the desired bandgap properties may be formulated by reference to the diagrams and lattice matching equations. In one embodiment, this analysis makes it possible to formulate new super-hetero-epitaxial semiconductor systems, such as systems based on group IV alloys on c-plane LaF.sub.3; group IV alloys on c-plane langasite; Group III-V alloys on c-plane langasite; and group II-VI alloys on c-plane sapphire.

  12. Synthesis, Crystal Structure, and Characterization of a New Organic-Inorganic Hybrid Material:

    OpenAIRE

    Hela Ferjani; Habib Boughzala; Ahmed Driss

    2013-01-01

    The title compound is an organic-inorganic hybrid material. The single crystal X-ray diffraction investigation reveals that the studied compound crystallizes in the orthorhombic system, space group Pbca with the following lattice parameters:  (4) Å,  (3) Å,  (6) Å, and . The crystal lattice is composed of a discrete anion surrounded by piperazinium cations, chlorine anions, and water molecules. Complex hydrogen bonding interactions between , , organic cations, and water molecules form a thre...

  13. Organic and Hybrid Organic Solid-State Photovoltaic Materials and Devices

    Science.gov (United States)

    2014-03-06

    conductive polyarylene ethynylene polymers for photovoltaic applications. The structure at the molecular scale was characterized using X-ray scattering...Processing of Thin Film Flexible Solar Cells” who exchanged knowledge about device-level questions and capabilities of simulations. The Ohio Department of...Indianapolis, IN, May, 2011. (2) “Hybrid Photovoltaic Materials: Characterization of Polymer -Nanoparticle composites” Lama, B.; Espe, M. P.; Central Regional

  14. Outdoor Stand-Off Interrogation of Fissionable Material with a Hybrid Coded Imaging System

    Science.gov (United States)

    2013-06-01

    OUTDOOR STAND-OFF INTERROGATION OF FISSIONABLE MATERIAL WITH A HYBRID CODED IMAGING SYSTEM  A.L. Hutcheson  , B.F. Phlips, E.A. Wulf ...of the Hermes-III gamma ray simulator,” in Pulsed Power Conference, 1989. 7 th , 1898, p. 26. [5] E.A. Wulf , A.L. Hutcheson, B.F. Phlips, L.J

  15. A review of composite material applications in the automotive industry for the electric and hybrid vehicle

    Science.gov (United States)

    Bauer, J. L.

    1979-01-01

    A review is made of the state-of-the-art in regard to the use of composite materials for reducing the structural mass of automobiles. Reduction of mass provides, in addition to other engineering improvements, increased performance/range advantages that are particularly needed in the electric and hybrid vehicle field. Problems encountered include the attainment of mass production techniques and the prevention of environmental hazards.

  16. Hybrid Soft Soil Tire Model (HSSTM). Part 1: Tire Material and Structure Modeling

    Science.gov (United States)

    2015-04-28

    HYBRID SOFT SOIL TIRE MODEL (HSSTM). PART I: TIRE MATERIAL AND STRUCTURE MODELING Taheri, Sh.a,1, Sandu, C.a...model the dynamic behavior of the tire on soft soil , a lumped mass discretized tire model using Kelvin-Voigt elements is developed. To optimize the...terrains (such as sandy loam) and tire force and moments, soil sinkage, and tire deformation data were collected for various case studies based on a

  17. A hybrid phenomenological model for ferroelectroelastic ceramics. Part I: Single phased materials

    Science.gov (United States)

    Stark, S.; Neumeister, P.; Balke, H.

    2016-10-01

    In this part I of a two part series, a rate-independent hybrid phenomenological constitutive model applicable for single phased polycrystalline ferroelectroelastic ceramics is presented. The term "hybrid" refers to the fact that features from macroscopic phenomenological models and micro-electromechanical phenomenological models are combined. In particular, functional forms for a switching function and the Helmholtz free energy are assumed as in many macroscopic phenomenological models; and the volume fractions of domain variants are used to describe the internal material state, which is a key feature of micro-electromechanical phenomenological models. The approach described in this paper is an attempt to combine the advantages of macroscopic and micro-electromechanical material models. Its potential is demonstrated by comparison with experimental data for barium titanate. Finally, it is shown that the model for single phased materials cannot reproduce the material behavior of morphotropic PZT ceramics based on a realistic choice for the material parameters. This serves as a motivation for part II of the series, which deals with the modeling of morphotropic PZT ceramics taking into account the micro-structural specifics of these materials.

  18. Self-assembly of nucleic acids, silk and hybrid materials thereof

    Science.gov (United States)

    Humenik, Martin; Scheibel, Thomas

    2014-12-01

    Top-down approaches based on etching techniques have almost reached their limits in terms of dimension. Therefore, novel assembly strategies and types of nanomaterials are required to allow technological advances. Self-assembly processes independent of external energy sources and unlimited in dimensional scaling have become a very promising approach. Here, we highlight recent developments in self-assembled DNA-polymer, silk-polymer and silk-DNA hybrids as promising materials with biotic and abiotic moieties for constructing complex hierarchical materials in ‘bottom-up’ approaches. DNA block copolymers assemble into nanostructures typically exposing a DNA corona which allows functionalization, labeling and higher levels of organization due to its specific addressable recognition properties. In contrast, self-assembly of natural silk proteins as well as their recombinant variants yields mechanically stable β-sheet rich nanostructures. The combination of silk with abiotic polymers gains hybrid materials with new functionalities. Together, the precision of DNA hybridization and robustness of silk fibrillar structures combine in novel conjugates enable processing of higher-order structures with nanoscale architecture and programmable functions.

  19. A Study of Hybrid Composite Hydroxyapatite (HA-Geopolymers as a Material for Biomedical Application

    Directory of Open Access Journals (Sweden)

    Saleha

    2017-01-01

    Full Text Available The main purpose of this research is to study the physical properties and microstructure characters of hybrid composites HA-geopolymers as a material for biomedical application. Hybrid composite HA–geopolymers were produced through alkaline activation method of metakaolin as a matrix and HA as the filler. HA was synthesized from eggshell particles by using a precipitation method. The addition of HA in metakaolin paste was varied from 0.5%, 1.0%, 1.5%, and 2.0% relative the weight of metakaolin. FTIR was used to examine the absorption bands the composites. X-ray diffraction (XRD was used to study the crystal structure of the starting and the resulting materials. Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS was used to investigate the surface morphology of the composites. The thermal properties of the samples was examined by means of Differential Scanning Calorimetry (DSC. Capacitance measurement was conducted to investigate the bioactive properties of HA. The study results suggest that hybrid composite HA-geopolymers has a potential to be applied as a biomedical such as biosensor material.

  20. Novel bioactive materials: silica aerogel and hybrid silica aerogel/pseudo wollastonite

    Energy Technology Data Exchange (ETDEWEB)

    Resendiz-Hernandez, P. J.; Cortes-Hernandez, D. a.; Saldivar-Ramirez, M. M. G.; Acuna-gutierrez, I. O.; Flores-Valdes, A.; Torres-rincon, S.; Mendez-Nonell, J.

    2014-07-01

    Silica aerogel and hybrid silica aerogel/pseudo wollastonite materials were synthesized by controlled hydrolysis of tetraethoxysilane (TEOS) using also methanol (MeOH) and pseudo wollastonite particles. The gels obtained were dried using a novel process based on an ambient pressure drying. Hexane and hexamethyl-disilazane (HMDZ) were the solvents used to chemically modify the surface. In order to assess bioactivity, aerogels, without and with pseudowollastonite particles, were immersed in simulated body fluid (SBF) for 7 and 14 days. The hybrid silica aerogel/pseudo wollastonite showed a higher bioactivity than that observed for the single silica aerogel. However, as in both cases a lower bioactivity was observed, a biomimetic method was also used to improve it. In this particular method, samples of both materials were immersed in SBF for 7 days followed by their immersion in a more concentrated solution (1.5 SBF) for 14 days. A thick and homogeneous bonelike apatite layer was formed on the biomimetically treated materials. Thus, bioactivity was successfully improved even on the aerogel with no pseudowollastonite particles. As expected, the hybrid silica aerogel/pseudowollastonite particles showed a higher bioactivity. (Author)

  1. Contributions of each isotope in structural material on radiation damage in a hybrid reactor

    Science.gov (United States)

    Günay, Mehtap

    2016-11-01

    In this study, the fluids were used in the liquid first-wall, blanket and shield zones of the designed hybrid reactor system. In this study, salt-heavy metal mixtures consisting of 93-85% Li20Sn80 + 5% SFG-PuO2 and 2-10% UO2, 93-85% Li20Sn80 + 5% SFG-PuO2 and 2-10% NpO2, and 93-85% Li20Sn80 + 5% SFG-PuO2 and 2-10% UCO were used as fluids. In this study, the effect on the radiation damage of spent fuel-grade (SFG)-PuO2, UO2, NpO2 and UCO contents was investigated in the structural material of a designed fusion-fission hybrid reactor system. In the designed hybrid reactor system were investigated the effect on the radiation damage of the selected fluid according to each isotopes of structural material in the structural material for 30 full power years (FPYs). Three-dimensional analyses were performed using the most recent MCNPX-2.7.0 Monte Carlo radiation transport code and the ENDF/B-VII.0 nuclear data library.

  2. Biocompatibility improvement of titanium implants by coating with hybrid materials synthesized by sol-gel technique.

    Science.gov (United States)

    Catauro, M; Bollino, F; Papale, F

    2014-12-01

    Organic-inorganic hybrid materials based on zirconia and polyethylene glycol (PEG) have been synthesized via sol-gel method in the present study. Those materials, still in the sol phase, have been used to coat a titanium grade 4 (Ti-4) substrate to improve its biological properties. Dip-coating technique has been used to obtain thin films. PEG, a biocompatible polymer, used as the organic phase, has been incorporated with different percentages in an inorganic zirconium-based matrix. Those hybrids have been characterized by Fourier transform infrared spectroscopy (FTIR) to detect interactions between the two phases. The films have been examined using SEM to detect morphological changes with PEG percentages. The potential applications of the hybrid coatings in biomedical field have been evaluated by bioactivity and cytotoxicity tests. The coated titanium was immersed in simulated body fluid (SBF) for 21 days and the hydroxyapatite deposition on its surface was subsequently evaluated, as that feature can be used as an index of bone-bonding capability. SEM equipped with energy dispersive spectrometer (EDS) was used to examine hydroxyapatite formation. NIH 3T3 mouse embryonic fibroblast cells were seeded on specimens to evaluate cells-materials interactions and cell vitality was inspected using WST-8 Assay.

  3. Luminescent hybrid materials based on (8-hydroxyquinoline)-substituted metal-organic complexes and lead-borate glasses

    Science.gov (United States)

    Petrova, Olga B.; Anurova, Maria O.; Akkuzina, Alina A.; Saifutyarov, Rasim R.; Ermolaeva, Ekaterina V.; Avetisov, Roman I.; Khomyakov, Andrew V.; Taydakov, Ilya V.; Avetissov, Igor Ch.

    2017-07-01

    Novel luminescent organic-inorganic hybrid materials based on 8-hydroxyquinoline metal complexes (Liq, Kq, Naq, Rbq, Mgq2, Srq2, Znq2, Scq3, Alq3, Gaq3, and Inq3) have been synthesized by a high temperature exchange reaction with 80PbF2-20B2O3 inorganic low-melting glass. The mechanical and optical properties, transmission spectra, emission an excitation photoluminescence, and luminescence kinetic of hybrid materials were studied. All hybrid materials showed a wide luminescence band in the range 400-700 nm.

  4. A Na3V2(PO4)3 cathode material for use in hybrid lithium ion batteries.

    Science.gov (United States)

    Song, Weixin; Ji, Xiaobo; Pan, Chengchi; Zhu, Yirong; Chen, Qiyuan; Banks, Craig E

    2013-09-14

    A NASICON-structure Na3V2(PO4)3 cathode material prepared by carbothermal reduction method is employed in a hybrid-ion battery with Li-involved electrolyte and anode. The ion-transportation mechanism is firstly investigated in this complicated system for an open three-dimensional framework Na3V2(PO4)3. Ion-exchange is greatly influenced by the standing time, for example, the 1 hour battery presents a specific capacity of 128 mA h g(-1) while the 24 hour battery exhibits a value of 148 mA h g(-1) with improved rate and cycling performances over existing literature reported Li-ion batteries. In the hybrid-ion system, an ion-exchange process likely takes place between the two Na(2) sites in the rhombohedral structure. NaLi2V2(PO4)3 could be produced by ion-transportation since the Na(+) in the Na(1) site is stationary and the three Na(2) sites could be used to accommodate the incoming alkali ions; Li(x)Na(y)V2(PO4)3 would come out when the vacant site in Na(2) was occupied depending on the applied voltage range. The reported methodology and power characteristics are greater than those previously reported.

  5. Preparation and Gas Adsorption of Porous Materials from Molecular Precursors

    DEFF Research Database (Denmark)

    Hu, Xinming

    ABSTRACT This thesis deals with the synthesis of porous materials and their applications in gas adsorption. The thesis consists of eight chapters as follows: The first two chapters provide a brief introduction to porous materials and gas adsorption. Chapter 1 gives an overview of construction...... and characteristics of various porous materials, including activated carbons, zeolites, metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and organic porous polymers (POPs). Chapter 2 briefly introduces gas adsorption theory, such as physical and chemical adsorption, adsorption isotherms...

  6. High Refractive Organic–Inorganic Hybrid Films Prepared by Low Water Sol-Gel and UV-Irradiation Processes

    Directory of Open Access Journals (Sweden)

    Hsiao-Yuan Ma

    2016-03-01

    Full Text Available Organic-inorganic hybrid sols (Ti–O–Si precursor were first synthesized by the sol-gel method at low addition of water, and were then employed to prepare a highly refractive hybrid optical film. This film was obtained by blending the Ti–O–Si precursor with 2-phenylphenoxyethyl acrylate (OPPEA to perform photo-polymerization by ultraviolet (UV irradiation. Results show that the film transparency of poly(Ti–O–Si precursor-co-OPPEA film is higher than that of a pure poly(Ti–O–Si precursor film, and that this poly(Ti–O–Si precursor-co-OPPEA hybrid film exhibits a high transparency of ~93.7% coupled with a high refractive index (n of 1.83 corresponding to a thickness of 2.59 μm.

  7. Field Emission Properties of the Graphene Double-Walled Carbon Nanotube Hybrid Films Prepared by Vacuum Filtration and Screen Printing

    Directory of Open Access Journals (Sweden)

    Jinzhuo Xu

    2013-01-01

    Full Text Available The graphene double-walled carbon nanotube (DWCNT hybrid films were prepared by vacuum filtration and screen printing. Their electron field emission properties have been studied systematically. The electron emission properties of the hybrid films are much better than those of pure DWCNT films and pure graphene films. Comparing with the screen printed films, the vacuum filtered films have many advantages, such as lower turn-on field, higher emission current density, better uniformity, better long-term stability, and stronger adhesive strength with conductive substrates. The optimized hybrid films with 20% weight ratio of graphene, which were fabricated by vacuum filtration, show the best electron emission performances with a low turn-on field of 0.50 Vμm−1 (at 1 μAcm−2 and a high field enhancement factor β of 27000.

  8. PREPARATION OF POLYIMIDE-BaTiO3 HYBRID FILMS BY A DISPERSION PROCESS AND THEIR MICROSTRUCTURE

    Institute of Scientific and Technical Information of China (English)

    Yue-sheng Li; Yue-jin Tong; Kai Jing; Meng-xian Ding

    2001-01-01

    Barium titanate (BaTiO3) powders with particle sizes of 30~50 nm were prepared from barium stearate, titanium alkoxides and stearic acid by stearic acid-gel method. Dispersing the agglomerate of BaTiO3 nanoparticles into poly(amic acid) solution followed by curing led to the formation of polyimide hybrid films. The hybrid films were transparent and well distributed with BaTiO3 nanoparticles when the BaTiO3 content was less than 1 wt%. Highly loaded hybrid film containing 30 wt % BaTiO3 was tough, had a smooth surface and possessed much higher dielectric and piezoelectric constants than the parent polyimide.

  9. Materials for Lithium Batteries Prepared via Mechanochemical Route

    Institute of Scientific and Technical Information of China (English)

    N.V.Kosova

    2007-01-01

    1 Results Nanostructured materials are currently of interest for lithium-ion batteries due to relevant demands for high-rate performance batteries and the aspect of structural stability (reversibility) under charge-discharge processes.Decreasing of particle size facilitates the reducing of diffuse paths for lithium ions as compared with micron-sized materials and the increasing of surface contact between electrode and electrolyte leading to acceleration of ionic transport and of charge-discharge process...

  10. Preparation and characterization of trihydroxamic acid functionalized carbon materials for the removal of Cu(II) ions from aqueous solution

    Science.gov (United States)

    Godino-Salido, M. Luz; Santiago-Medina, Antonio; López-Garzón, Rafael; Gutiérrez-Valero, María D.; Arranz-Mascarós, Paloma; López de la Torre, M. Dolores; Domingo-García, María; López-Garzón, F. Javier

    2016-11-01

    The main objective of this study is to prepare and characterize two functionalizated carbon materials with enhanced adsorptive properties for Cu(II). Thus, two novel hybrid materials have been prepared by a non-covalent functionalization method based on the adsorption of a pyrimidine-desferrioxamine-B conjugate compound (H4L) on two activated carbons, ACs (labelled Merck and F). The adsorption of H4L on the ACs is pH-dependent and highly irreversible. This is due to strong π-π interactions between the arene centers of the ACs and the pyrimidine moiety of H4L. The textural characterization of the AC/H4L hybrids shows large decreases of their surface areas. Thus the values of Merck and F are 1031 and 1426 m2/g respectively, while these of Merck/H4L and F/H4L hybrids are 200 and 322 m2/g. An important decrease in the micropore volumes is also found, due to the blockage of narrow porosity produced by the adsorption of H4L molecules. The ACs/H4L hybrids show larger adsorption capacities for Cu(II) (0.105(4) and 0.13(2) mmol/g, at pH 2.0, and 0.20(3) and 0.242(9) mmol/g, at pH 5.5, for Merck/H4L and F/H4L, respectively) than those of the ACs (0.024(6) and 0.096(9) mmol/g, at pH 2.0, and 0.10(2) and 0.177(8) mmol/g, at pH 5.5, for Merck and F respectively), which is explained on the basis of the complexing ability of the trihydroxamic acid functions. The desorption of Cu(II) from the ACs/H4L/Cu(II) materials in acid solution allows the regeneration of most active sites (78.5% in the case of Merck/H4L/Cu(II) and 83.0% in the case of F/H4L/Cu(II)).

  11. Preparation of Zirconia Based Packing Material and Its Evaluation

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new reversed-phase packing (C18-PBD-ZrO2) was prepared by depositing and cross-linking 1-octadecene (ODE or C18) and polybutadiene (PBD) onto the surface of porous zirconia microspheres (5~10 mm in diameter) which were synthesized by a sol-gel process. These novel column packings possess high mechanical and chemical stability,wider usable pH range and can be used to separate basic compounds with no observable peak tailing.

  12. Hybrid Direct Carbon Fuel Cell Performance with Anode Current Collector Material

    DEFF Research Database (Denmark)

    Deleebeeck, Lisa; Kammer Hansen, Kent

    2015-01-01

    The influence of the current collector on the performance of a hybrid direct carbon fuel cell (HDCFC), consisting of solid oxide fuel cell (SOFC) with a molten carbonate-carbon slurry in contact with the anode, has been investigated using current-voltage curves. Four different anode current...... collectors were studied: Au, Ni, Ag, and Pt. It was shown that the performance of the direct carbon fuel cell (DCFC) is dependent on the current collector materials, Ni and Pt giving the best performance, due to their catalytic activity. Gold is suggested to be the best material as an inert current collector...

  13. Self-assembled hybrid materials based on conjugated polymers and semiconductors nano-crystals for plastic solar cells; Architectures hybrides auto-assemblees a base de systemes polyconjugues et de nanocristaux de semi-conducteurs pour le photovoltaique plastique

    Energy Technology Data Exchange (ETDEWEB)

    Girolamo, J. de

    2007-11-15

    This work is devoted to the elaboration of self-assembled hybrid materials based on poly(3- hexyl-thiophene) and CdSe nano-crystals for photovoltaic applications. For that, complementary molecular recognition units were introduced as side chain groups on the polymer and at the nano-crystals' surface. Diamino-pyrimidine groups were introduced by post-functionalization of a precursor copolymer, namely poly(3-hexyl-thiophene-co-3- bromo-hexyl-thiophene) whereas thymine groups were introduced at the nano-crystals' surface by a ligand exchange reaction with 1-(6-mercapto-hexyl)thymine. However, due to their different solubility, the mixing of the two components by solution processes is difficult. A 'one-pot' procedure was developed, but this method led to insoluble aggregates without control of the hybrid composition. To overcome the solubility problem, the layer-by-layer method was used to prepare the films. This method allows a precise control of the deposition process. Experimental parameters were tested in order to evaluate their impact on the resulting film. The films morphology was investigated by microscopy and X-Ray diffraction techniques. These analyses reveal an interpenetrated structure of nano-crystals within the polymer matrix rather than a multilayered structure. Electrochemical and spectro electrochemical studies were performed on the hybrid material deposited by the LBL process. Finally the materials were tested in a solar cell configuration and the I=f(V) curves reveals a clear photovoltaic behaviour. (author)

  14. TiO2 Nanocrystals Grown on Graphene as Advanced Photocatalytic Hybrid Materials

    OpenAIRE

    Liang, Yongye; Wang, Hailiang; Casalongue, Hernan Sanchez; Chen, Zhuo; Dai, Hongjie

    2010-01-01

    Graphene/TiO2 nanocrystals hybrid is successfully prepared by directly growing TiO2 nanocrystals on graphene oxide (GO) sheets. The direct growth of nanocrystals on GO sheets was achieved by a two-step method, in which TiO2 was coated on GO sheets by hydrolysis first and crystallized into anatase nanocrystals by hydrothermal treatment in second step. Slow hydrolysis reaction through the use of EtOH/H2O mixed solvents and addition of H2SO4 allows the selectively growing TiO2 on GO and suppress...

  15. Preparation of poly(ethylene glycol/polylactide hybrid fibrous scaffolds for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Ni P

    2011-11-01

    Full Text Available PeiYan Ni, ShaoZhi Fu, Min Fan, Gang Guo, Shuai Shi, JinRong Peng, Feng Luo, ZhiYong QianState Key Laboratory of Biotherapy and Cancer Center, West China Hospital, West China Medical School, Sichuan University, Chengdu, Sichuan, People's Republic of ChinaAbstract: Polylactide (PLA electrospun fibers have been reported as a scaffold for bone tissue engineering application, however, the great hydrophobicity limits its broad application. In this study, the hybrid amphiphilic poly(ethylene glycol (PEG/hydrophobic PLA fibrous scaffolds exhibited improved morphology with regular and continuous fibers compared to corresponding blank PLA fiber mats. The prepared PEG/PLA fibrous scaffolds favored mesenchymal stem cell (MSC attachment and proliferation by providing an interconnected porous extracellular environment. Meanwhile, MSCs can penetrate into the fibrous scaffold through the interstitial pores and integrate well with the surrounding fibers, which is very important for favorable application in tissue engineering. More importantly, the electrospun hybrid PEG/PLA fibrous scaffolds can enhance MSCs to differentiate into bone-associated cells by comprehensively evaluating the representative markers of the osteogenic procedure with messenger ribonucleic acid quantitation and protein analysis. MSCs on the PEG/PLA fibrous scaffolds presented better differentiation potential with higher messenger ribonucleic acid expression of the earliest osteogenic marker Cbfa-1 and mid-stage osteogenic marker Col I. The significantly higher alkaline phosphatase activity of the PEG/PLA fibrous scaffolds indicated that these can enhance the differentiation of MSCs into osteoblast-like cells. Furthermore, the higher messenger ribonucleic acid level of the late osteogenic differentiation markers OCN (osteocalcin and OPN (osteopontin, accompanied by the positive Alizarin red S staining, showed better maturation of osteogenic induction on the PEG/PLA fibrous scaffolds at the

  16. All-ceramic single-tooth restorations: choosing the material to match the preparation--preparing the tooth to match the material.

    Science.gov (United States)

    Baltzer, A

    2008-01-01

    The shape of a crown preparation is the prime determinant for the choice of material for an all-ceramic restoration. One essential factor is the available space for the restoration, which requires a certain occlusal thickness. The dentist's preparation design determines the available vertical clearance, and the dental technician has the responsibility of advising the dentist with regard to either choosing the right material to match the preparation or to preparing the tooth to match the material. Assuming a minimum static fracture strength of > 2000 N, the following materials can be used for all-ceramic crowns: Laboratory surveys have shown that in most situations, the available occlusal clearance in clinical reality is only 0.8 to 0.9 mm (after cementing). This shows that the available space will often be insufficient for providing monoblock crowns and still on the tight side for veneered oxide ceramics (In Ceram, zirconia, etc.). However, crowns made of veneered oxide ceramics are much more complex to fabricate and much more expensive. By simply providing a minimal occlusal thickness of 1.5 mm, the treatment provider could therefore easily facilitate the use of the much more economical monoblock crowns without compromising either esthetics or strength. Actually, crowns with veneered oxide ceramic copings do not offer any higher fracture resistance compared to Mark II crowns as long as the minimum thickness requirements are met. The flexural strength of CAD/CAM-fabricated lithium disilicate rods is about twice that of CAD/CAM-fabricated Mark II rods. When used for crowns with a wall thickness of 1.5 mm, however, both materials exhibit the same fracture strength of between 2000 and 2500 N. This is related to the different reinforcing action of the adhesive luting agent, which is essentially required for both these materials. When choosing a material, preparation shapes, technical complexity and cost should be thoroughly compared and scrutinized and should figure

  17. Experiments of Applying the Rare-Earth Modifying Agents in New Dental Materials Preparation

    Institute of Scientific and Technical Information of China (English)

    Chen Xiaohu; Wang Hua; Wang Qin; Li Xiaodi; Ma Rui

    2007-01-01

    Harmless rare-earth modifying agents were prepared by orthogonal experiments. A new resin material was synthesized with the qualities such as rigidity, rubbing abrasion, aging, luster and plasticity better than the dental resin materials in common used. It could be used as the substitutes for the applied resin teeth materials.

  18. Stretchable living materials and devices with hydrogel-elastomer hybrids hosting programmed cells.

    Science.gov (United States)

    Liu, Xinyue; Tang, Tzu-Chieh; Tham, Eléonore; Yuk, Hyunwoo; Lin, Shaoting; Lu, Timothy K; Zhao, Xuanhe

    2017-02-28

    Living systems, such as bacteria, yeasts, and mammalian cells, can be genetically programmed with synthetic circuits that execute sensing, computing, memory, and response functions. Integrating these functional living components into materials and devices will provide powerful tools for scientific research and enable new technological applications. However, it has been a grand challenge to maintain the viability, functionality, and safety of living components in freestanding materials and devices, which frequently undergo deformations during applications. Here, we report the design of a set of living materials and devices based on stretchable, robust, and biocompatible hydrogel-elastomer hybrids that host various types of genetically engineered bacterial cells. The hydrogel provides sustainable supplies of water and nutrients, and the elastomer is air-permeable, maintaining long-term viability and functionality of the encapsulated cells. Communication between different bacterial strains and with the environment is achieved via diffusion of molecules in the hydrogel. The high stretchability and robustness of the hydrogel-elastomer hybrids prevent leakage of cells from the living materials and devices, even under large deformations. We show functions and applications of stretchable living sensors that are responsive to multiple chemicals in a variety of form factors, including skin patches and gloves-based sensors. We further develop a quantitative model that couples transportation of signaling molecules and cellular response to aid the design of future living materials and devices.

  19. Stretchable living materials and devices with hydrogel–elastomer hybrids hosting programmed cells

    Science.gov (United States)

    Liu, Xinyue; Tang, Tzu-Chieh; Tham, Eléonore; Yuk, Hyunwoo; Lin, Shaoting; Lu, Timothy K.; Zhao, Xuanhe

    2017-01-01

    Living systems, such as bacteria, yeasts, and mammalian cells, can be genetically programmed with synthetic circuits that execute sensing, computing, memory, and response functions. Integrating these functional living components into materials and devices will provide powerful tools for scientific research and enable new technological applications. However, it has been a grand challenge to maintain the viability, functionality, and safety of living components in freestanding materials and devices, which frequently undergo deformations during applications. Here, we report the design of a set of living materials and devices based on stretchable, robust, and biocompatible hydrogel–elastomer hybrids that host various types of genetically engineered bacterial cells. The hydrogel provides sustainable supplies of water and nutrients, and the elastomer is air-permeable, maintaining long-term viability and functionality of the encapsulated cells. Communication between different bacterial strains and with the environment is achieved via diffusion of molecules in the hydrogel. The high stretchability and robustness of the hydrogel–elastomer hybrids prevent leakage of cells from the living materials and devices, even under large deformations. We show functions and applications of stretchable living sensors that are responsive to multiple chemicals in a variety of form factors, including skin patches and gloves-based sensors. We further develop a quantitative model that couples transportation of signaling molecules and cellular response to aid the design of future living materials and devices. PMID:28202725

  20. Understanding supercapacitors based on nano-hybrid materials with interfacial conjugation

    Institute of Scientific and Technical Information of China (English)

    George Z. Chen

    2013-01-01

    The recent fast development of supercapacitors, also known scientifically as electrochemical capacitors, has benefited significantly from synthesis, characterisations and electrochemistry of nanoma-terials. Herein, the principle of supercapacitors is explained in terms of performance characteristics and charge storage mechanisms, i.e. double layer (or interfacial) capacitance and pseudo-capacitance. The semiconductor band model is applied to qualitatively account for the pseudo-capacitance in association with rectangular cyclic voltammograms (CVs) and linear galvanostatic charging and discharging plots (GCDs), aiming to differentiate supercapacitors from rechargeable batteries. The invalidity of using peak shaped CVs and non-linear GCDs for capacitance measurement is highlighted. A selective review is given to the nano-hybrid materials between carbon nanotubes and redox active materials such as electronically conducting polymers and transition metal oxides. A new concept,“interfacial conjugation”, is introduced to reflect the capacitance enhancement resulting from π-π stacking interactions at the interface between two materials with highly conjugated chemical bonds. The prospects of carbon nanotubes and graphenes for supercapacitor applications are briefly compared and discussed. Hopefully, this article can help readers to understand supercapacitors and nano-hybrid materials so that further developments in materials design and synthesis, and device engineering can be more efficient and objective.