WorldWideScience

Sample records for hybrid corn performance

  1. [Super sweet corn hybrids adaptability for industrial processing. I freezing].

    Science.gov (United States)

    Alfonzo, Braunnier; Camacho, Candelario; Ortiz de Bertorelli, Ligia; De Venanzi, Frank

    2002-09-01

    With the purpose of evaluating adaptability to the freezing process of super sweet corn sh2 hybrids Krispy King, Victor and 324, 100 cobs of each type were frozen at -18 degrees C. After 120 days of storage, their chemical, microbiological and sensorial characteristics were compared with a sweet corn su. Industrial quality of the process of freezing and length and number of rows in cobs were also determined. Results revealed yields above 60% in frozen corns. Length and number of rows in cobs were acceptable. Most of the chemical characteristics of super sweet hybrids were not different from the sweet corn assayed at the 5% significance level. Moisture content and soluble solids of hybrid Victor, as well as total sugars of hybrid 324 were statistically different. All sh2 corns had higher pH values. During freezing, soluble solids concentration, sugars and acids decreased whereas pH increased. Frozen cobs exhibited acceptable microbiological rank, with low activities of mesophiles and total coliforms, absence of psychrophiles and fecal coliforms, and an appreciable amount of molds. In conclusion, sh2 hybrids adapted with no problems to the freezing process, they had lower contents of soluble solids and higher contents of total sugars, which almost doubled the amount of su corn; flavor, texture, sweetness and appearance of kernels were also better. Hybrid Victor was preferred by the evaluating panel and had an outstanding performance due to its yield and sensorial characteristics.

  2. Performance of Hybrid Corn in Different Environmental Conditions in the Region Of Sinop-MT

    Directory of Open Access Journals (Sweden)

    D. C. T. Souza

    2013-07-01

    Full Text Available Abstract: The aim of this study was to evaluate the agronomic performance of corn hybrids in environmental conditions favorable and unfavorable. For this, two experiments were conducted at Sinop / MT, being considered as favorable environmental conditions the use of fertilizer recommended for the crop at planting and coverage, and unfavorable conditions only recommended fertilization at planting. The experimental design was a randomized block with three replicates, with plots of 2 rows of 3 meters. The treatments were: double hybrid (Balu 761, single hybrids (AG 7088 and 30F90Y and triple hybrid (2B688. The characteristics evaluated were number of spikes, husked spikes weight, plant height and height of first spike. Regarding the number of ears, under favorable conditions, the hybrid double (Balu 761 and the triple hybrid (2B688 stood out against the simple hybrid. For the character number of spikes per plant, the husked spike weight in kg the triple hybrid 2B688 stood in relation to other unfavorable conditions. Considering the character plant height and first spike insertion, single hibrid 30F90Y, showed higher estimate in unfavorable conditions. In conclusion, the agronomic performance of types of hybrids varies in relation to environmental conditions and genotypes composition, and in this study the triple hybrid stood out in relation to others. Keywords: Zea mays, fertilization and breeding.

  3. Henry Agard Wallace, the Iowa Corn Yield Tests, and the Adoption of Hybrid Corn

    OpenAIRE

    Richard C. Sutch

    2008-01-01

    This research report makes the following claims: 1] There was not an unambiguous economic advantage of hybrid corn over the open-pollinated varieties in 1936. 2] The early adoption of hybrid corn before 1937 can be better explained by a sustained propaganda campaign conducted by the U.S. Department of Agriculture at the direction of the Secretary of Agriculture, Henry Agard Wallace. The Department's campaign echoed that of the commercial seed companies. The most prominent hybrid seed company,...

  4. Improving hybrid seed production in corn with glyphosate-mediated male sterility.

    Science.gov (United States)

    Feng, Paul C C; Qi, Youlin; Chiu, Tommy; Stoecker, Martin A; Schuster, Christopher L; Johnson, Scott C; Fonseca, Augustine E; Huang, Jintai

    2014-02-01

    Hybrid corn varieties exhibit benefits associated with heterosis and account for most of the corn acreage in the USA. Hybrid seed corn is produced by crossing a female parent which is male-sterile and therefore incapable of self-pollination with a male parent as the pollen donor. The majority of hybrid seed corn is produced by mechanical detasseling which involves physically removing the tassel, a process that is laborious and costly. Glyphosate-resistant corn was developed via expression of a glyphosate insensitive 5-enolpyruvyl-shikimate 3-phosphate synthase enzyme (CP4-EPSPS). Experimentation with molecular expression elements resulted in selective reduction of CP4-EPSPS expression in male reproductive tissues. The resulting plant demonstrated sterile tassel following glyphosate application with little to no injury to the rest of the plant. Using (14)C-glyphosate as a marker, we also examined the translocation of glyphosate to the tassel via spray application in a track sprayer to simulate field application. The results allowed optimization of spray parameters such as dose, spray timing and target to maximize tassel delivery of glyphosate for efficient sterilization. The Roundup hybridization system (RHS) is a novel process for hybrid seed production based on glyphosate-mediated male sterility. RHS replaces mechanical detasseling with glyphosate spray and greatly simplifies the process of hybrid seed corn production. © 2013 Society of Chemical Industry.

  5. Agronomic and chemical characteristics of hybrid corn to ensiling

    Directory of Open Access Journals (Sweden)

    Flávia Borges de Assis

    2014-12-01

    Full Text Available Our aim was to evaluate agronomic and chemical characteristics of corn hybrids to ensiling. It were evaluated nine corn hybrids (MX 300, RB 9308, 2B655, XB 6012, GNZ 2500, PL6890, PRE 32D10, PRE 22T10 e AG 1051, with three replicates. The higher fresh matter yield were observed in the hybrids PL6890 and PRE 32D10, while the dry matter yield was observed in the hybrid PRE 32D10 (13.43 t ha-1. The hybrids PRE 32D10 and PRE 22T10 stood out to present higher percent of leaf in relation to whole plant, while the lower percent of stems was found in the hybrids MX 300, 2B655 and XB 6012, however the higher leaves: stems relation was found in XB 6012 (0.49. There was higher CP content in the hybrid PRE 32D10 (9.10% of DM, while the lower NDF (57.78% of DM and cellulose content (24.27% of DM were observed in the hybrid GNZ 2500. The hybrid PL6890 presented higher ADF and lignin contents, the others hybrids had values lower. The lower NDIN content was observed in the hybrid RB 9308, while the lower AIDN content occurred on the hybrid 2B655. The lower buffer capacity was observed in the hybrid 2B655 (0.29. There are some differences on chemical composition among the corn hybrids used in this study, however, it is recommended to use the hybrids MX 300, PL6890 and PRE 32D10 for showing higher dry matter yield, which may reflect in the amortization of silage production costs.

  6. Effects of Plant Density on Sweet and Baby Corn (Hybrid KSC 403 Yield and Yield Components

    Directory of Open Access Journals (Sweden)

    H Bavi

    2016-07-01

    Full Text Available Introduction Sweet corn is the one of the most important types of corn. There is a high amount of sugar in the endosperm of sweet corn than dent corn. Baby corn is the ear of corn that is being harvested in the silking stage before the end of pollination. This crop has an interesting using methods as salad, conserve production and vegetative consumption. Both two sweet and baby corn is obtained from one plant in different growth stages and could be harvested from one corn hybrid. Best yield and quality of baby corn is obtained from sweet corn hybrids, because of high amounts of sugar in the grains and ears. Sweet corn and baby corn could be harvested at early dough stage (with about 30 % of humidity and early silking stage before the pollination is completed, respectively. Plant density is the most important factor in growing corn, especially in sweet and baby corn. Khuzestan province is one of the main regions of corn production in Iran. In Khuzestan, forage and silage corn have the most production among the summer crops. Corn is planted in two planting date in Khuzestan: early spring and early summer. Spring corn planting produces little grain yield due to Simultaneity of silking stage with hot early summer days. Because of little production and little research about sweet and baby corn, this study was performed and designed. Materials and Methods In order to investigate the effects of plant density and harvesting method on sweet corn and baby corn yield, an experiment was performed during 2012-13, in research farm of Ramin Agriculture and Natural Resources University of Khuzestan, located in southwest of Iran. In this experiment, four plant densities (7, 9, 11 and 13 plants.m-2 and two harvesting methods (baby corn and sweet corn were investigated in an RCB statistical design with four replications. The KSC 403 hybrid was used and investigated in the experiment, as a sweet corn hybrid. Statistical analysis was performed using SAS 9.1 through

  7. Corn stover fractions as a function of hybrid, maturity, site and year

    Energy Technology Data Exchange (ETDEWEB)

    Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada); Lefsrud, M. [McGill Univ., Macdonald College, Ste-Anne-de-Bellevue, PQ (Canada). Dept. of Biosystems Engineering

    2010-07-01

    Corn stover is usually left on the ground following corn harvest so that it can be incorporated into the soil as organic matter and to protect against erosion. Part of the corn stover is oxidized in the atmosphere. Corn stover represents between 40 and 50 per cent of the dry matter (DM) contained in the aerial biomass of corn plants. Recent studies have shown that half of the corn stover could be harvested sustainably on low-sloping land under no-till practice. In Quebec, where 400,000 ha of corn are planted each year, corn stover could provide one million t DM of currently neglected biomass. Various hybrids of corn were monitored from early September to late November at 4 different sites during 2007, 2008 and 2009. Whole plants cut at 100 mm above the ground were collected weekly and separated into 7 fractions, notably the grain, the cob, the husk, the stalk below the ear, the stalk above the ear, the leaves below the ear and the leaves above the ear. In 2007, corn ears on average, were at 0.96 m above the ground at a site with low crop heat units (CHU). Hybrids grown in a warmer site were taller and their ears were 1.21 m above the ground. The DM partitioned in 7 components was 54 per cent grain, 14 per cent bottom stalk, 6 per cent top stalk, 5 per cent bottom leaves, 7 per cent top leaves, 5 per cent husk and 9 per cent cob. The total mass of fibre during harvest decreased from 8.9 to 6.6 t DM/ha for a low CHU hybrid and from 9.3 to 8.3 t DM/ha for a high CHU hybrid. Grain yield increased in 2008 from 3.8 to 7.6 t DM/ha over a 12-week period.

  8. INFLUENCE OF EUROPEAN CORN BORER (Ostrinia nubilalis Hübner ON CORN HYBRIDS IN NORTH-WEST AND EASTERN CROATIA

    Directory of Open Access Journals (Sweden)

    Zvjezdana Augustinović

    2005-12-01

    Full Text Available European corn borer (Ostrinia nubilalis Hubner is one of the major corn pest in the world and in Croatia. Former investigations of corn borer in Croatia covered mostly its Eastern region. In trials conducted in 1998 and 1999 the research was extended to the North Western part of Croatia too. Macro trials were carried out with corn hybrids of FAO groups 200-600 at three localities: Križevci, Agricultural institute Osijek and at «Belje» PIK Karanac. In 1998 the intensity of the corn borer attack at the locality of «Belje» PIK Karanac was about 37.92% and in Agricultural institute Osijek 80.83%. In 1999 it varied between 37.08% at the locality of Agricultural Institute Osijek and 71.20% at the locality in Križevci. The estimated number of holes per plant in all three localities in both years was higher than the number of caterpillars. Length of damage per plant was between 0.38 and 18.80 cm. The data showed significant differences in the intensity of damaging effects on different localities while no significant differences concerning various hybrids were found. The statistical data concerning yield in both years showed significant differences among hybrids, localities and their interactions.

  9. Effect of corn silage hybrids differing in starch and neutral detergent fiber digestibility on lactation performance and total-tract nutrient digestibility by dairy cows.

    Science.gov (United States)

    Ferraretto, L F; Fonseca, A C; Sniffen, C J; Formigoni, A; Shaver, R D

    2015-01-01

    Selection for hybrids with greater starch and NDF digestibility may be beneficial for dairy producers. The objective of this study was to determine the effect of feeding a TMR containing a floury-leafy corn silage hybrid (LFY) compared with a brown midrib corn silage hybrid (BMR) for intake, lactation performance, and total-tract nutrient digestibility in dairy cows. Ninety-six multiparous Holstein cows, 105±31d in milk at trial initiation, were stratified by DIM and randomly assigned to 12 pens of 8 cows each. Pens were randomly assigned to 1 of 2 treatments, BMR or LFY, in a completely randomized design; a 2-wk covariate period with cows fed a common diet followed by a 14-wk treatment period with cows fed their assigned treatment diet. Starch digestibilities, in situ, in vitro, and in vivo, were greater for LFY compared with BMR; the opposite was observed for NDF digestibility. Cows fed BMR consumed 1.7kg/d more dry matter than LFY. Although, actual-, energy-, and solids-corrected milk yields were greater for BMR than LFY, feed conversions (kg of milk or component-corrected milk per kg of DMI) did not differ. Fat-corrected milk and milk fat yield were similar, as milk fat content was greater for cows fed LFY (4.05%) than BMR (3.83%). Cows fed BMR had lower milk urea nitrogen concentration, but greater milk protein and lactose yields compared with LFY. Body weight change and condition score were unaffected by treatment. Total-tract starch digestibility was greater for cows fed the LFY corn silage; however, dry matter intake and milk and protein yields were greater for cows fed the BMR corn silage. Although total-tract starch digestibility was greater for cows fed the LFY corn silage, feed efficiency was not affected by hybrid type due to greater dry matter intake and milk and protein yields by cows fed the BMR corn silage. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  10. Morpho-Productive and Chemical Composition of Local and Foreign Sweet Corn Hybrids Grown in the Conditions of Transylvania Plateau

    Directory of Open Access Journals (Sweden)

    Luana PĂCURAR

    2017-11-01

    Full Text Available Sweet corn (Zea mays L. belongs to the Gramineae family, var. rugosa (Bonof convar. Saccharate (Sturt. and can be distinguished from normal corn by presence of one or more mutant genes that affect carbohydrate metabolism in endosperm. Purpose of this research is to compare behavior of sweet corn hybrids created at SCDA Turda, but also foreign hybrids, in terms of quality elements and chemical composition, in conditions of Transylvania plateau, in two localities: Turda and Viişoara. As biological material following domestic sweet corn hybrids were chosen: ‘Prima’, ‘Estival’, ‘Deliciul verii’, ‘Dulcin’, ‘Delicios’, ‘Estival M’ and foreign hybrid ‘Jubilee’. These hybrids were also analyzed in terms of chemical composition. Weight of ‘Estival’ hybrid has the best behavior in both localities; as regards to cobs length, ‘Delicios’ hybrid has registered increases very significant positive, differences between plant height in the two localities confirm significant influence of environment on formation of this important typical qualitative characteristics, highest performances in terms of β-cryptoxanthin and zeaxanthin content, are recorded by ‘Jubilee’ in both localities, ‘Deliciul Verii’ hybrid records significant value for lutein content, also recording an important addition of carbohydrates in Turda, ‘Prima’ and ‘Estival’ hybrids recorded highest values of sucrose in both localities.

  11. Multiple insect resistance in 59 commmerical corn hybrids - 2017

    Science.gov (United States)

    Commercial corn hybrids were screened for ear- and kernel-feeding insect resistance under field conditions at Tifton, GA. Nine hybrids were rated Very Good (VG), the highest rating for multiple insect resistance in 2017 (see following table). Thirteen were Good (G), 19 were Fair (F), and 13 were Poo...

  12. Field screening of experimental corn hybrids and inbred lines for multiple ear-feeding insect resistance.

    Science.gov (United States)

    Ni, Xinzhi; Xu, Wenwei; Krakowsky, Matthew D; Buntin, G David; Brown, Steve L; Lee, R Dewey; Coy, Anton E

    2007-10-01

    Identifying and using native insect resistance genes is the core of integrated pest management. In this study, 10 experimental corn, Zea mays L., hybrids and 10 inbred lines were screened for resistance to major ear-feeding insects in the southeastern Coastal Plain region of the United States during 2004 and 2005. Ear-feeding insect damage was assessed at harvest by visual damage rating for the corn earworm, Helicoverpa zea (Boddie), and by the percentage of kernels damaged by the maize weevil, Sitophilus zeamais Motschulsky, and stink bugs [combination of Euschistus servus (Say) and southern green stink bug, Nezara viridula (L.)]. Among the eight inbred lines and two control populations examined, C3S1B73-5b was resistant to corn earworm, maize weevil, and stink bugs. In contrast, C3S1B73-4 was resistant to corn earworm and stink bugs, but not to maize weevil. In a similar manner, the corn hybrid S1W*CML343 was resistant to all three ear-feeding insects, whereas hybrid C3S1B73-3*Tx205 was resistant to corn earworm and maize weevil in both growing seasons, but susceptible to stink bugs in 2005. The silk-feeding bioassay showed that corn earworm developed better on corn silk than did fall armyworm. Among all phenotypic traits examined (i.e., corn ear size, husk extension, and husk tightness), only corn ear size was negatively correlated to corn earworm damage in the inbred lines examined, whereas only husk extension (i.e., coverage) was negatively correlated to both corn earworm and maize weevil damage on the experimental hybrids examined. Such information could be used to establish a baseline for developing agronomically elite corn germplasm that confers multiple ear-feeding insect resistance.

  13. Modulation of repetitive genes in the parent forms of heterozygous corn hybrids

    International Nuclear Information System (INIS)

    Gilyazetdinov, S.Ya.; Zimnitskii, A.N.; Yakhin, I.A.; Bikbaeva, E.S.

    1987-01-01

    The number of copies of the genes of high-molecular-weight rRNA, 5 S r RNA, and certain other families of repetitive sequences of DNA in the genome of different forms of corn is not coordinated but is stably inherited in the same strains. The authors present the results of their investigations into the repetition of the genes of tRNA, 5 S rRNA, histones, and the controlling element Ds of corn for the highly heterozygous hybrid Slava (VIR 44 x VIR 38), the medium-heterozygous hybrid Svetoch (VIR 40 x VIR 43), the low heterozygous hybrid Iskra (VIR 26 x VIR 27), and their parent strains. The relative content of these sequences was studied by the molecular hybridization of DNA immobilized on nitrocellulose filters with [ 125 I]tRNA labeled in vitro, 5 S rRNA, histone DNA of Drosophila, and the Ds-element of corn. The DNA preparations were isolated from the zones of the meristem (1.5-2mm), elongation (4-5mm), differentiation of the roots (3 cm), of 3-4 day seedlings, and from isolated embryos of 4 h and 24 h seedlings. The DNA of the embryos immobilized on the filters was preliminarily incubated with unlabeled high-molecular-weight rRNA in the experiments with tRNA and 5 S rRNA, while when histone DNA and the Ds element of corn were used in the hybridization reaction, it was preliminary incubated with plasmid DNA

  14. Performance of irrigated green corn cultivars in different plant populations at sowing

    Directory of Open Access Journals (Sweden)

    José C. Soares Neto

    Full Text Available ABSTRACT This study aimed to evaluate the yield of green corn hybrids grown under irrigation in different plant populations at sowing. The assay was carried out in the experimental area located in the city of Arapiraca, Alagoas State, Brazil, from November 2015 to January 2016. A randomized complete block design (RCBD was used, in a 2 x 5 factorial scheme with four replicates. A double- and a single-cross hybrid (AG 1051 and BM 3061, which are suitable for green corn production, were cultivated in five spacings between plants at sowing (15.0, 17.5, 20.0, 22.5 and 25.0 cm. The characteristics photosynthetic rate (PR, ear length with rusk (HEL and without husk (UEL, husked ear weight (HEW, unhusked ear weight (UEW, percentage of marketable ears (%ME and weight of husk (HW were evaluated. The double- and single-cross hybrids AG 1051 and BM 3061 showed green ears with commercial standard. The cultivar BM 3061 showed the best results for most of the characteristics related to the performance of green corn (PR, HEL, UEL, UEW, HEW, %ME. The spacing of 17.5 cm between plants at sowing was the most indicated for irrigated green corn cultivation.

  15. Bromatological characteristics and ruminal digestibility of grain corn hybrids with different vitreousness in silage maturity

    Directory of Open Access Journals (Sweden)

    Evandrei Santos Rossi

    2016-06-01

    Full Text Available The aim of this research was to evaluate vitreousness in commercial corn hybrids with flint and dent grains and to study the effect of this characteristic on agronomic behavior, nutritional value, and ruminal degradability of grains harvested in silage maturity. Twelve commercial corn hybrids were evaluated. They were divided in two groups (six with flint grains and six with dent grains. The experiments were conducted in two municipalities represented by Guarapuava and Laranjeiras do Sul, both in Paraná State. The harvest for the grain quality analysis was performed at ¾ of the milk line stage in the grain. The following characteristics were evaluated: grain yield, grain yield in silage maturity, vitreousness, ruminal digestibility of grain, neutral detergent fiber, acid detergent fiber and crude protein. The grains in the group of dent hybrids exhibited better degradability associated with lower vitreousness than the group of flint hybrids. The group of dent hybrids exhibited better ruminal digestibility of the grains associated with lower vitreousness versus the group of flint hybrids. There is a negative correlation between vitreousness and the digestibility of the grain; thus, vitreousness can be a criterion for selecting genotypes for forage production.

  16. Stacked -gene hybrids were not found to be superior to glyphosate resistant or Non-GMO corn hybrids

    Science.gov (United States)

    Seed costs of modern corn hybrids genetically modified with multiple traits for insect and herbicide resistance “stacked-gene” are in excess of $100.00 US per acre. Yields and net returns per acre along with yield component data were determined for ten hybrids, four stacked-gene, four glyphosate re...

  17. [Corn.

    Science.gov (United States)

    Iowa History for Young People, 1993

    1993-01-01

    This theme issue focuses on corn. Iowa is the number one corn producing state in the United States. The featured articles in the issue concern, among other topics, Iowa children who live on farms, facts and statistics about corn, the Mesquakie Indians and corn shelling, corn hybrids, a short story, and the corn palaces of Sioux City. Activities,…

  18. Agronomic performance of insect-protected and herbicide-tolerant MON 89034 × TC1507 × NK603 × DAS-40278-9 corn is equivalent to that of conventional corn.

    Science.gov (United States)

    de Cerqueira, Denise T Rezende; Schafer, Ariane C; Fast, Brandon J; Herman, Rod A

    2017-07-03

    Agronomic characteristics of genetically modified (GM) MON 89034 × TC1507 × NK603 × DAS-40278-9 (PowerCore™ Enlist™), MON 89034 × TC1507 × NK603 (PowerCore™), and DAS-40278-9 (Enlist™) corn, a non-GM near-isogenic hybrid, and 2 commercial non-GM hybrids were assessed in a field study to determine if the agronomic performance of the GM corn hybrids is equivalent to that of non-transgenic hybrid corn. The MON 89034 × TC1507 × NK603 × DAS-40278-9 hybrid corn was developed through stacking of 4 individual transgenic events, MON 89034, TC1507, NK603, and DAS-40278-9 by traditional breeding and contains the cry1A.105 and cry2Ab2 (MON 89034), cry1F and pat (TC1507), cp4 epsps (NK603) and aad-1 (DAS-40278-9) transgenes. These transgenes encode the proteins Cry1A.105, Cry2Ab2, and Cry1F, which confer insect resistance, PAT, CP4 EPSPS, and AAD-1, which confer herbicide tolerance. The following agronomic characteristics were assessed in the study: initial and final stand count, seedling vigor, time to silk, time to pollen shed, pollen viability, plant height, ear height, stalk lodging, root lodging, days to maturity, stay green, disease incidence, insect damage, herbicide injury, and yield. The agronomic assessment was conducted in 2 regions of Brazil (Indianopolis-MG; Cravinhos-SP). The agronomic attributes for all GM entries were statistically indistinguishable from the non-GM near-isogenic hybrid. In addition, most of the agronomic assessments fell within the range of the commercial varieties included in the study. Taken together, MON 89034 × TC1507 × NK603 × DAS-40278, MON 89034 × TC1507 × NK603, and DAS-40278-9 were found to be agronomically equivalent to non-GM corn.

  19. CADMIUM AND LEAD STATUS IN CORN HYBRIDS GROWN ON ACID SOIL OF EASTERN CROATIA

    Directory of Open Access Journals (Sweden)

    V. Kovačević

    2002-06-01

    Full Text Available Twenty corn (Zea mays L. hybrids were grown under field conditions in the west part of Brodsko-posavska county in Eastern Croatia during 2000 and 2001 growing seasons. The field trial was conducted in four replicates. The ear-leaf at beginning of silking stage (the second decade of July was taken for chemical analysis from each plot. Mean soil sample was taken by auger to 30 cm of depth. The total amounts of Cd and Pb in corn leaves were measured by ICP-AES technique after their microwave digestion using concentrated HNO3+H2O2. Mobile fraction of these elements in soil was extracted by ammonium acetate-EDTA solution. The experimental field is acid hydromorphic soil (locality Malino with moderate levels of mobile fractions of calcium, magnesium and aluminum. Also, mobile fraction of cadmium and lead are tolerable for growing of health food. Weather conditions during the study differed from the long-term mean. Low rainfall quantities during 5-months period and the higher air-temperatures characterized the 2000 growing season. Excess of rainfall in June and September, their shortage in July and August, as well as high temperatures in August, are main characteristics of weather during the corn growing seasons in 2001. Mean concentrations of cadmium and lead in corn leaves in our investigations were 0.14 ppm Cd and 0.420 ppm Pb. These amounts are low and not dangerous for plants, because critical concentrations of Cd and Pb in plants ranged from 5 to 10 ppm Cd and 10-20 ppm Pb. Considerable differences of cadmium and lead status in the ear-leaf were found among tested corn hybrids. For example, genetically induced differences from 0.07 to 0.21 ppm Cd were found, while these values for Pb were from 0.241 to 0.569 ppm Pb. Especially low Cd concentrations were found in six corn hybrids (OsSK373, E9917/99, Bc278, OsSK2-191, OsSK382 and Clarica: mean 0.092 ppm Cd, while in three hybrids it was considerably higher, but acceptable from the aspect of plant

  20. Genetic Variation and Phenotypic Response of 15 Sweet Corn (Zea mays L. Hybrids to Population Density

    Directory of Open Access Journals (Sweden)

    William F. Tracy

    2013-06-01

    Full Text Available Planting sweet corn at higher densities may increase the canopy cover, reducing light transmission to the understory and suppressing weed growth. High planting densities can also negatively impact the crop, however, by decreasing ear size and overall yield. The objective of this study was to determine the potential for increased density tolerance of 15 sweet corn hybrids by estimating the general combining ability (GCA and specific combining ability (SCA for traits of interest. In 2010 and 2011, a half-diallel of six historic sweet corn inbreds was evaluated in a split-block randomized complete block design in four Wisconsin environments, with four replicates in each environment. Hybrids were planted at a low density of 29,936 plants ha−1, a medium density of 63,615 plants ha−1, and a high density of 97,293 plants ha−1. Significant differences between hybrids were found for phenomorphological traits and ear characteristics. Inbreds C68, C40 and Ia5125 produced the progeny most tolerant of the highest population density. Among these genotypes, tolerance to high density is a heritable trait, indicating the feasibility of breeding sweet corn for density tolerance and potential weed competitiveness.

  1. Influence of corn oil recovery on life-cycle greenhouse gas emissions of corn ethanol and corn oil biodiesel.

    Science.gov (United States)

    Wang, Zhichao; Dunn, Jennifer B; Han, Jeongwoo; Wang, Michael Q

    2015-01-01

    Corn oil recovery and conversion to biodiesel has been widely adopted at corn ethanol plants recently. The US EPA has projected 2.6 billion liters of biodiesel will be produced from corn oil in 2022. Corn oil biodiesel may qualify for federal renewable identification number (RIN) credits under the Renewable Fuel Standard, as well as for low greenhouse gas (GHG) emission intensity credits under California's Low Carbon Fuel Standard. Because multiple products [ethanol, biodiesel, and distiller's grain with solubles (DGS)] are produced from one feedstock (corn), however, a careful co-product treatment approach is required to accurately estimate GHG intensities of both ethanol and corn oil biodiesel and to avoid double counting of benefits associated with corn oil biodiesel production. This study develops four co-product treatment methods: (1) displacement, (2) marginal, (3) hybrid allocation, and (4) process-level energy allocation. Life-cycle GHG emissions for corn oil biodiesel were more sensitive to the choice of co-product allocation method because significantly less corn oil biodiesel is produced than corn ethanol at a dry mill. Corn ethanol life-cycle GHG emissions with the displacement, marginal, and hybrid allocation approaches are similar (61, 62, and 59 g CO2e/MJ, respectively). Although corn ethanol and DGS share upstream farming and conversion burdens in both the hybrid and process-level energy allocation methods, DGS bears a higher burden in the latter because it has lower energy content per selling price as compared to corn ethanol. As a result, with the process-level allocation approach, ethanol's life-cycle GHG emissions are lower at 46 g CO2e/MJ. Corn oil biodiesel life-cycle GHG emissions from the marginal, hybrid allocation, and process-level energy allocation methods were 14, 59, and 45 g CO2e/MJ, respectively. Sensitivity analyses were conducted to investigate the influence corn oil yield, soy biodiesel, and defatted DGS displacement credits

  2. Metabolite variation in hybrid corn grain from a large-scale multisite study

    Directory of Open Access Journals (Sweden)

    Mingjie Chen

    2016-06-01

    Full Text Available Metabolite composition is strongly affected by genotype, environment, and interactions between genotype and environment, although the extent of variation caused by these factors may depend upon the type of metabolite. To characterize the complexity of genotype, environment, and their interaction in hybrid seeds, 50 genetically diverse non-genetically modified (GM maize hybrids were grown in six geographically diverse locations in North America. Polar metabolites from 553 harvested corn grain samples were isolated and analyzed by gas chromatography–mass spectrometry and 45 metabolites detected in all samples were used to generate a data matrix for statistical analysis. There was moderate variation among biological replicates and across genotypes and test sites. The genotype effects were detected by univariate and Hierarchical clustering analyses (HCA when environmental effects were excluded. Overall, environment exerted larger effects than genotype, and polar metabolite accumulation showed a geographic effect. We conclude that it is possible to increase seed polar metabolite content in hybrid corn by selection of appropriate inbred lines and growing regions.

  3. Starch degradability of dry and ensiled high-moisture grains of corn hybrids with different textures at different grinding degrees

    Directory of Open Access Journals (Sweden)

    Wagner dos Reis

    2011-02-01

    Full Text Available This research evaluated corn grains with flint and dent texture (ensiled high-moisture or dried, submitted to grinding degrees, using the in situ ruminal degradation technique. Three rumen canulated adult sheeps were used in a complete randomized design, using a factorial outline 2 x 2 x 3, with two corn hybrids (flint and dent texture, two conservation methods (ensiled high-moisture and dry and three grinding degress (whole, coarsely and finely ground, corresponding to the sieve of 12; 10 and 8 mm. Starch soluble fraction (A of the dent hybrid ensiled corn grains was greater comparing to the dry materials and in both conservation forms this fraction was reduced in the flint texture hybrid, while the insoluble fraction potentially degradable (B the opposite occurred. The degradation potential was higher in grains ensiled in two textures. The ensiled allowed more starch effective degradation in relation to dry grain in two textures and the grains dent texture hybrid also increased such degradation in both conservation methods. The dent texture and the ensiled high-moisture grains proved the best option considering the starch degradability. Regardless of the conservation forms, the grains of corn hybrid flint texture should be finely ground, for providing higher ruminal degradation, while for the dent texture hybrid, the coarsely and whole grinding are the most suitable for ensiled and dry grain, respectively.

  4. Ácido fítico de híbridos de milho e alguns produtos industrializados = Phytic acid in corn hybrids and in some industrialized corn products

    Directory of Open Access Journals (Sweden)

    Tatiana Shizue Fukuji

    2008-01-01

    Full Text Available O ácido fítico (AF ou mio-inositol hexafosfato está presente principalmente em cereais, e o germe de milho apresenta teor elevado, com cerca de 6,0 a 7,0% em base seca. Devido a sua propriedade quelante com metais di e tri-valentes, o AF apresenta capacidade antioxidante com eficaz atuação na inibição de reações de oxidação. O teor de AF foi determinado no germe e endosperma de 11 híbridos de milhos, cultivados no Estado do Paraná, e em diferentes produtos industrializados de milho. Os germes de híbridos de milho foram caracterizados como componentes do milho, com elevado teor e osendospermas com baixo teor de AF. Os produtos derivados de milho, elaborados basicamente com endosperma tais como canjica, creme de milho, farinha de milho e fubá fino, apresentaram menor teor de AF, enquanto aqueles originários dos germes desengordurado, fino, gordo e película de milho apresentaram maior teor de AF.Phytic acid (PA, also known as myoinositol hexaphosphate, is found mainly in cereal grains. Corn germ has high concentrations of PA – from 6.0 to 7.0% on a dry weight basis. Due to its chelating properties on di- and trivalent metals, PA has antioxidantattributes, effectively inhibiting oxidation reactions. In this study, PA levels were determined in the germ and endosperm of eleven corn hybrids cultivate in Paraná State (Brazil, and also in several industrialized corn products. Corn hybrid germs were characterized as corn components with high PA levels, whereas endosperms featuredlow levels of PA. Corn-based industrialized products, derived mostly from corn endosperm (such as canjica, creamed corn, corn flour and cornmeal featured the lowest PA values. Conversely, defatted corn germs and corn cuticle showed the highest PA levels.

  5. Growth and yield of corn hybrids in response to association with Azospirillum brasilense and nitrogen fertilization

    Directory of Open Access Journals (Sweden)

    Deniele Marini

    2015-02-01

    Full Text Available There is a growing interest in optimizing the positive effects of the association between Azospirillum bacteria and corn crop in order to reduce the use of nitrogen fertilizers. This study aimed to evaluate the inoculation efficiency of an A. brasilense-based commercial product in association with different rates of nitrogen fertilization in two corn genotypes. The experiment was arranged in a 2 x 2 x 5 factorial randomized block design, with four replications. The treatments consisted of two corn hybrids (30F53 and CD386; with and without inoculation with a commercial product based on A. brasilense and five nitrogen rates (0, 40, 80, 120 and 160 kg ha-1. The variables plant height, basal stem diameter, leaf area, shoot dry matter, leaf nitrogen content, length and diameter of the cob, weight of 100 grains and grain yield were evaluated. Inoculation with A. brasilense provided increases of 11 and 12% in leaf area and shoot dry matter, respectively. There were differences in the response of the corn hybrids for most variables and the increase in nitrogen supply provided increments in the growth and yield of corn.

  6. Microstructure and Mechanical Behaviour of Stir-Cast Al-Mg-Sl Alloy Matrix Hybrid Composite Reinforced with Corn Cob Ash and Silicon Carbide

    Directory of Open Access Journals (Sweden)

    Oluwagbenga Babajide Fatile

    2014-10-01

    Full Text Available In this present study, the microstructural and mechanical behaviour of Al-Mg-Si alloy matrix composites reinforced with silicon carbide (SiC and Corn cob ash (An agro‑waste was investigated. This research work was aimed at assessing the suitability of developing low cost- high performance Al-Mg-Si hybrid composite. Silicon carbide (SiC particulates added with 0,1,2,3 and 4 wt% Corn cob ash (CCA were utilized to prepare 10 wt% of the reinforcing phase with Al-Mg-Si alloy as matrix using two-step stir casting method. Microstructural characterization, density measurement, estimated percent porosity, tensile testing, and micro‑hardness measurement were used to characterize the composites produced. From the results obtained, CCA has great potential to serve as a complementing reinforcement for the development of low cost‑high performance aluminum hybrid composites.

  7. Transgenic Bt Corn, Soil Insecticide, and Insecticidal Seed Treatment Effects on Corn Rootworm (Coleoptera: Chrysomelidae) Beetle Emergence, Larval Feeding Injury, and Corn Yield in North Dakota.

    Science.gov (United States)

    Calles-Torrez, Veronica; Knodel, Janet J; Boetel, Mark A; Doetkott, Curt D; Podliska, Kellie K; Ransom, Joel K; Beauzay, Patrick; French, B Wade; Fuller, Billy W

    2018-02-09

    Northern, Diabrotica barberi Smith & Lawrence (Coleoptera: Chrysomelidae), and western, Diabrotica virgifera virgifera LeConte (Coleoptera: Chrysomelidae), corn rootworms are economic pests of corn, Zea mays L. in North America. We measured the impacts of corn hybrids incorporated with Cry3Bb1, Cry34/35Ab1, and pyramided (Cry3Bb1 + Cry34/35Ab1) Bacillus thuringiensis Berliner (Bt) proteins, tefluthrin soil insecticide, and clothianidin insecticidal seed treatment on beetle emergence, larval feeding injury, and corn yield at five locations from 2013 to 2015 in eastern North Dakota. In most cases, emergence was significantly lower in Bt-protected corn than in non-Bt corn hybrids. Exceptions included Wyndmere, ND (2013), where D. barberi emergence from Cry34/35Ab1 plots was not different from that in the non-Bt hybrid, and Arthur, ND (2013), where D. v. virgifera emergence from Cry3Bb1 plots did not differ from that in the non-Bt hybrid. Bt hybrids generally produced increased grain yield compared with non-Bt corn where rootworm densities were high, and larval root-feeding injury was consistently lower in Bt-protected plots than in non-Bt corn. The lowest overall feeding injury and emergence levels occurred in plots planted with the Cry3Bb1 + Cry34/35Ab1 hybrid. Time to 50% cumulative emergence of both species was 5-7 d later in Bt-protected than in non-Bt hybrids. Tefluthrin and clothianidin were mostly inconsequential in relation to beetle emergence and larval root injury. Our findings could suggest that some North Dakota populations could be in early stages of increased tolerance to some Bt toxins; however, Bt corn hybrids currently provide effective protection against rootworm injury in eastern North Dakota. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Effect of maturity and hybrid on ruminal and intestinal digestion of corn silage in dry cows.

    Science.gov (United States)

    Peyrat, J; Baumont, R; Le Morvan, A; Nozière, P

    2016-01-01

    The aim of this study was to evaluate the effect of stage of maturity at harvest on extent of starch, neutral detergent fiber (NDF), and protein digestion, and rumen fermentation in dry cows fed whole-plant corn silage from different hybrids. Four nonlactating Holstein cows cannulated at the rumen and proximal duodenum were fed 4 corn silages differing in hybrid (flint vs. flint-dent) and maturity stage (early vs. late) in a 4 × 4 Latin square design. From early to late maturity, starch content increased (from 234.5 to 348.5 g/kg), whereas total-tract (99.7 to 94.5%) and ruminal starch digestibility (91.3 to 86.5%) decreased significantly. The decrease in ruminal starch digestibility with increasing maturity was similar between hybrids. No effects were found of maturity, hybrid, or maturity × hybrid interaction on total-tract NDF digestibility, ruminal NDF digestibility, true digestibility of N and organic matter in the rumen, or microbial synthesis. Harvesting at later maturity led to increased ruminal ammonia, total volatile fatty acid concentrations, and acetate/propionate ratio but not pH. This study concludes that delaying date of harvest modifies the proportions of digestible starch and NDF supplied to cattle. Adjusting date of corn harvest to modulate amount of rumen-digested starch could be used as a strategy to control nutrient delivery to ruminants. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. Field Trial Performance of Herculex XTRA (Cry34Ab1/Cry35Ab1) and SmartStax (Cry34Ab1/Cry35Ab1 + Cry3Bb1) Hybrids and Soil Insecticides Against Western and Northern Corn Rootworms (Coleoptera: Chrysomelidae).

    Science.gov (United States)

    Johnson, K D; Campbell, L A; Lepping, M D; Rule, D M

    2017-06-01

    Western corn rootworm, Diabrotica virgifera virgifera LeConte (Coleoptera: Chrysomelidae), and northern corn rootworm, Diabrotica barberi Smith and Lawrence (Coleoptera: Chrysomelidae), are important insect pests in corn, Zea mays L. For more than a decade, growers have been using transgenic plants expressing proteins from the bacterium Bacillus thuringiensis (Bt) to protect corn roots from feeding. In 2011, western corn rootworm populations were reported to have developed resistance to Bt hybrids expressing Cry3Bb1 and later found to be cross-resistant to hybrids expressing mCry3A and eCry3.1Ab. The identification of resistance to Cry3 (Cry3Bb1, mCry3A, and eCry3.1Ab) hybrids led to concerns about durability and efficacy of products with single traits and of products containing a pyramid of a Cry3 protein and the binary Bt proteins Cry34Ab1 and Cry35Ab1. From 2012 to 2014, 43 field trials were conducted across the central United States to estimate root protection provided by plants expressing Cry34Ab1/Cry35Ab1 alone (Herculex RW) or pyramided with Cry3Bb1 (SmartStax). These technologies were evaluated with and without soil-applied insecticides to determine if additional management measures provided benefit where Cry3 performance was reduced. Trials were categorized for analysis based on rootworm damage levels on Cry3-expressing hybrids and rootworm feeding pressure within each trial. Across scenarios, Cry34Ab1/Cry35Ab1 hybrids provided excellent root protection. Pyramided traits provided greater root and yield protection than non-Bt plus a soil-applied insecticide, and only in trials where larval feeding pressure exceeded two nodes of damage did Cry34Ab1/Cry35Ab1 single-trait hybrids and pyramided hybrids show greater root protection from the addition of soil-applied insecticides. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  10. Kernel compositions of glyphosate-tolerant and corn rootworm-protected MON 88017 sweet corn and insect-protected MON 89034 sweet corn are equivalent to that of conventional sweet corn (Zea mays).

    Science.gov (United States)

    Curran, Kassie L; Festa, Adam R; Goddard, Scott D; Harrigan, George G; Taylor, Mary L

    2015-03-25

    Monsanto Co. has developed two sweet corn hybrids, MON 88017 and MON 89034, that contain biotechnology-derived (biotech) traits designed to enhance sustainability and improve agronomic practices. MON 88017 confers benefits of glyphosate tolerance and protection against corn rootworm. MON 89034 provides protection against European corn borer and other lepidopteran insect pests. The purpose of this assessment was to compare the kernel compositions of MON 88017 and MON 89034 sweet corn with that of a conventional control that has a genetic background similar to the biotech sweet corn but does not express the biotechnology-derived traits. The sweet corn samples were grown at five replicated sites in the United States during the 2010 growing season and the conventional hybrid and 17 reference hybrids were grown concurrently to provide an estimate of natural variability for all assessed components. The compositional analysis included proximates, fibers, amino acids, sugars, vitamins, minerals, and selected metabolites. Results highlighted that MON 88017 and MON 89034 sweet corns were compositionally equivalent to the conventional control and that levels of the components essential to the desired properties of sweet corn, such as sugars and vitamins, were more affected by growing environment than the biotech traits. In summary, the benefits of biotech traits can be incorporated into sweet corn with no adverse effects on nutritional quality.

  11. Does Bt Corn Really Produce Tougher Residues

    Science.gov (United States)

    Bt corn hybrids produce insecticidal proteins that are derived from a bacterium, Bacillus thuringiensis. There have been concerns that Bt corn hybrids produce residues that are relatively resistant to decomposition. We conducted four experiments that examined the decomposition of corn residues und...

  12. Fast and efficient nanoshear hybrid alkaline pretreatment of corn stover for biofuel and materials production

    International Nuclear Information System (INIS)

    Wang, Wei; Ji, Shaowen; Lee, Ilsoon

    2013-01-01

    We report a fast and efficient nano-scale shear hybrid alkaline (NSHA) pretreatment method of lignocellulosic biomass. In this work, corn stover was pretreated in a modified Taylor–Couette reactor with alkali (sodium hydroxide) at room temperature for two minutes. Up to 82% of high cellulose content in the remaining solids was achieved with the novel NSHA pretreatment process. Compared with untreated corn stover, an approximately 4-fold increase in enzymatic cellulose conversion and a 5-fold increase in hemicellulose conversion were achieved. Compositional analysis proved significant removals of both lignin and hemicellulose after the NSHA pretreatment. SEM images revealed that the synergistic effect of NSHA pretreatment caused the severe disruption of biomass structure and exposure of cellulose microfibril aggregates in NSHA pretreated corn stover. Highlights: ► A fast nanoshear hybrid alkaline (NSHA) pretreatment method is reported. ► A modified Taylor–Couette reactor was applied. ► The retention time of the NSHA method is only 2 min. ► A 100% conversion of glucan was achieved in one day. ► NSHA greatly removed both lignin and xylan

  13. Behavior of hybrid corn crop as second rot incidence in West Region Paraná

    Directory of Open Access Journals (Sweden)

    Jean Sérgio Rosset

    2013-09-01

    Full Text Available The objective of this study was to evaluate the incidence and influence of stalk rot and ear in cultivation of hybrid corn second crop in west region Paraná. The experiment was conducted in randomized block design with six transgenic corn hybrids (DKB 330PRO, P4285HX, P3646HX, 30F53HX, P3340HX and P3161HX with four replications at spacing of 0.90 m between rows and 0.20 m between plants. The characteristics evaluated were: number of healthy and symptomatic plants, number of ears healthy and symptomatic and total number of spikes. After harvest, we assessed the length of ears healthy and symptomatic, bulk grain ears healthy and symptomatic, thousand grain weight of ears healthy and symptomatic, and grain mass per spike weighted, thousand grain weight and weighted productivity. The hybrid P3646HX showed 100% of plants with stem base rot (Colletotrichum graminicola and soft rot cob (Erwinia chrysanthemi pv. Zeae and 100% of ears with symptoms of soft rot, followed by hybrid 30F53HX, DKB 330PRO with 34.9 and 29.1% of ears with symptoms of soft rot respectively. The hybrid DKB330PRO showed healthy spikes and patients with superior size, resulting in less interference in the grain yield. The hybrid P3340 productivity was higher, with 7952 kg ha-1 , followed by hybrid 30F53HX and DKB330PRO. A positive correlation between agronomic characteristics and grain yield.

  14. Composition of forage and grain from second-generation insect-protected corn MON 89034 is equivalent to that of conventional corn (Zea mays L.).

    Science.gov (United States)

    Drury, Suzanne M; Reynolds, Tracey L; Ridley, William P; Bogdanova, Natalia; Riordan, Susan; Nemeth, Margaret A; Sorbet, Roy; Trujillo, William A; Breeze, Matthew L

    2008-06-25

    Insect-protected corn hybrids containing Cry insecticidal proteins derived from Bacillus thuringiensis have protection from target pests and provide effective management of insect resistance. MON 89034 hybrids have been developed that produce both the Cry1A.105 and Cry2Ab2 proteins, which provide two independent modes of insecticidal action against the European corn borer ( Ostrinia nubilalis ) and other lepidopteran insect pests of corn. The composition of MON 89034 corn was compared to conventional corn by measuring proximates, fiber, and minerals in forage and by measuring proximates, fiber, amino acids, fatty acids, vitamins, minerals, antinutrients, and secondary metabolites in grain collected from 10 replicated field sites across the United States and Argentina during the 2004-2005 growing seasons. Analyses established that the forage and grain from MON 89034 are compositionally comparable to the control corn hybrid and conventional corn reference hybrids. These findings support the conclusion that MON 89034 is compositionally equivalent to conventional corn hybrids.

  15. The effect of silage cutting height on the nutritive value of a normal corn silage hybrid compared with brown midrib corn silage fed to lactating cows.

    Science.gov (United States)

    Kung, L; Moulder, B M; Mulrooney, C M; Teller, R S; Schmidt, R J

    2008-04-01

    A brown midrib (BMR) hybrid and a silage-specific non-BMR (7511FQ) hybrid were harvested at a normal cut height leaving 10 to 15 cm of stalk in the field. The non-BMR hybrid was also cut at a greater height leaving 45 to 50 cm of stalk. Cutting high increased the concentrations of dry matter (+4%), crude protein (+5%), net energy for lactation (+3%), and starch (+7%), but decreased the concentrations of acid detergent fiber (-9%), neutral detergent fiber (-8%), and acid detergent lignin (-13%) for 7511FQ. As expected, the BMR corn silage was 30% lower in lignin concentration than 7511FQ. After 30 h of in vitro ruminal fermentation, the digestibility of neutral detergent fiber for normal cut 7511FQ, the same hybrid cut high, and the normal cut BMR hybrid were 51.7, 51.4, and 63.5%, respectively. Twenty-seven multiparous lactating cows were fed a total mixed ration composed of the respective silages (45% of dry matter) with alfalfa haylage (5%), alfalfa hay (5%), and concentrate (45%) (to make the TMR isocaloric and isonitrogenous) in a study with a 3 x 3 Latin square design with 21-d periods. Milk production was greater for cows fed the BMR hybrid (48.8 kg/d) compared with those fed the normal cut 7511FQ (46.8 kg/d) or cut high (47.7 kg/d). Dry matter intake was not affected by treatment. Feed efficiency for cows fed the BMR silage (1.83) was greater than for those fed high-cut 7511FQ (1.75), but was not different from cows fed the normal cut 7511FQ (1.77). Cows fed the BMR silage had milk with greater concentrations of lactose but lower milk urea nitrogen than cows on other treatments. Harvesting a silage-specific, non-BMR corn hybrid at a high harvest height improved its nutritive content, but the improvement in feeding value was not equivalent to that found when cows were fed BMR corn silage.

  16. Evaluation of Bt Corn with Pyramided Genes on Efficacy and Insect Resistance Management for the Asian Corn Borer in China.

    Directory of Open Access Journals (Sweden)

    Fan Jiang

    Full Text Available A Bt corn hybrid (AcIe with two Bt genes (cry1Ie and cry1Ac was derived by breeding stack from line expressing Cry1Ie and a line expressing Cry1Ac. Efficacy of this pyramided Bt corn hybrid against the Asian corn borer (ACB, Ostrinia furnacalis, was evaluated. We conducted laboratory bioassays using susceptible and resistant ACB strains fed on artificial diet or fresh plant tissues. We also conducted field trials with artificial infestations of ACB neonates at the V6 and silk stages. The toxin-diet bioassay data indicated that mixtures of Cry1Ac and Cry1Ie proteins had synergistic insecticidal efficacy. The plant tissue bioassay data indicated that Bt corn hybrids expressing either a single toxin (Cry1Ac or Cry1Ie or two toxins had high efficacy against susceptible ACB. Damage ratings in the field trials indicated that the Bt corn hybrids could effectively protect against 1st and the 2nd generation ACB in China. The hybrid line with two Bt genes showed a higher efficacy against ACB larvae resistant to Cry1Ac or CryIe than the hybrid containing one Bt gene, and the two gene hybrid would have increased potential for managing or delaying the evolution of ACB resistance to Bt corn plants.

  17. Evaluation of Bt Corn with Pyramided Genes on Efficacy and Insect Resistance Management for the Asian Corn Borer in China.

    Science.gov (United States)

    Jiang, Fan; Zhang, Tiantao; Bai, Shuxiong; Wang, Zhenying; He, Kanglai

    2016-01-01

    A Bt corn hybrid (AcIe) with two Bt genes (cry1Ie and cry1Ac) was derived by breeding stack from line expressing Cry1Ie and a line expressing Cry1Ac. Efficacy of this pyramided Bt corn hybrid against the Asian corn borer (ACB), Ostrinia furnacalis, was evaluated. We conducted laboratory bioassays using susceptible and resistant ACB strains fed on artificial diet or fresh plant tissues. We also conducted field trials with artificial infestations of ACB neonates at the V6 and silk stages. The toxin-diet bioassay data indicated that mixtures of Cry1Ac and Cry1Ie proteins had synergistic insecticidal efficacy. The plant tissue bioassay data indicated that Bt corn hybrids expressing either a single toxin (Cry1Ac or Cry1Ie) or two toxins had high efficacy against susceptible ACB. Damage ratings in the field trials indicated that the Bt corn hybrids could effectively protect against 1st and the 2nd generation ACB in China. The hybrid line with two Bt genes showed a higher efficacy against ACB larvae resistant to Cry1Ac or CryIe than the hybrid containing one Bt gene, and the two gene hybrid would have increased potential for managing or delaying the evolution of ACB resistance to Bt corn plants.

  18. Influence of brick air scrubber by-product on growth and development of corn and hybrid poplar.

    Science.gov (United States)

    Thomas, Carla N; Bauerle, William L; Owino, Tom O; Chastain, John P; Klaine, Stephen J

    2007-03-01

    Studies were conducted to determine the effects of spent reagent from air pollution control scrubbers used at a brick manufacturing facility on emergence, growth, and physiological responses of corn and hybrid poplar plants. Scrubber by-product was obtained from General Shale Brick, Louisville, KY. Potting substrate was weighed and quantities of scrubber by-product were added to the substrate to obtain treatments of 0%, 6.25%, 12.5%, 25%, 50%, 75%, and 100% scrubber by-product (w:w) for the corn study. Each treatment mix was potted into nine replicate polyethylene pots and four corn seeds were sown per pot. The pots were randomized in a greenhouse at Clemson University and the number of seedlings emerging from each treatment, dark-adapted leaf chlorophyll a fluorescence, and shoot heights were measured at the end of a 21-day growth period. Then, dry shoot biomass was determined for plants from each treatment and plant tissues were analyzed for selected constituents. For the poplar study, nine-inch cuttings of hybrid poplar clone 15-29 (Populus trichocarpa x P. deltoides) and clone OP367 (P. deltoides x P. nigra) were planted in treatments of scrubber by-product-potting soil mixes of 0% , 5% , 10% , and 25% w:w. Leaf chlorophyll a fluorescence was measured over six weeks and cumulative leaf area, dry biomass, and nutrient content of tissues were determined upon harvest. Results of these studies indicate that percent seedling emergence for corn plants decreased with increasing scrubber by-product application rates. Application rates up to 12.5% scrubber by-product w:w had no adverse effect on corn seedling emergence. Shoot elongation, biomass production, and the status of the photosynthetic apparatus of the seedlings were also not severely impaired at applications below this level. A critical value of 58.2% w:w scrubber by-product was estimated to cause 25% inhibition of seedling emergence. Biomass production, cumulative leaf area, and chlorophyll a fluorescence of

  19. Impact of Corn Earworm (Lepidoptera: Noctuidae) on Field Corn (Poales: Poaceae) Yield and Grain Quality.

    Science.gov (United States)

    Bibb, Jenny L; Cook, Donald; Catchot, Angus; Musser, Fred; Stewart, Scott D; Leonard, Billy Rogers; Buntin, G David; Kerns, David; Allen, Tom W; Gore, Jeffrey

    2018-05-28

    Corn earworm, Helicoverpa zea (Boddie), commonly infests field corn, Zea mays (L.). The combination of corn plant biology, corn earworm behavior in corn ecosystems, and field corn value renders corn earworm management with foliar insecticides noneconomical. Corn technologies containing Bacillus thuringiensis (Bt) Berliner (Bacillales: Bacillaceae) were introduced that exhibit substantial efficacy against corn earworm and may reduce mycotoxin contamination in grain. The first generation Bt traits in field corn demonstrated limited activity on corn earworm feeding on grain. The pyramided corn technologies have greater cumulative protein concentrations and higher expression throughout the plant, so these corn traits should provide effective management of this pest. Additionally, reduced kernel injury may affect physical grain quality. Experiments were conducted during 2011-2012 to investigate corn earworm impact on field corn yield and grain quality. Treatments included field corn hybrids expressing the Herculex, YieldGard, and Genuity VT Triple Pro technologies. Supplemental insecticide treatments were applied every 1-2 d from silk emergence until silk senescence to create a range of injured kernels for each technology. No significant relationship between the number of corn earworm damaged kernels and yield was observed for any technology/hybrid. In these studies, corn earworm larvae did not cause enough damage to impact yield. Additionally, no consistent relationship between corn earworm damage and aflatoxin contamination was observed. Based on these data, the economic value of pyramided Bt corn traits to corn producers, in the southern United States, appears to be from management of other lepidopteran insect pests including European and southwestern corn borer.

  20. Degradability of dry matter and crude protein of dry grains and wet grain silages from different processing corn hybrids (Zea mays)

    OpenAIRE

    Wagner dos Reis; Ciniro Costa; Paulo Roberto de Lima Meirelles; Marina Gabriela Berchiol da Silva; Marco Aurélio Factori; Janaína Conte Hadlich; Kátia de Oliveira; Erikelly Aline Ribeiro de Santana; Cristiano Magalhães Pariz; Josineudson Augusto II de Vasconcelos Silva

    2013-01-01

    The objective of this work was to evaluate the effect of processing two corn hybrids conserved, dry and humid grains, the dry matter (DM) and crude protein (CP) degradability in situ. The particle size was determined and difference was verified in MGD (Medium Geometric Diameter) of processed ingredients. Three sheep were used with rumen canulated, in a completely randomized design, using a factorial outline 2 x 2 x 3, being two corn hybrid, two conservation methods and three processing forms ...

  1. Efficacy of pyramided Bt proteins Cry1F, Cry1A.105, and cry2Ab2 expressed in Smartstax corn hybrids against lepidopteran insect pests in the northern United States.

    NARCIS (Netherlands)

    Rule, D.M.; Nolting, S.P.; Prasfika, P.L.; Storer, N.P.; Hopkins, B.W.; Scherder, E.J.A.; Siebert, M.W.; Hendrix, W.H.

    2014-01-01

    Commercial field corn (Zea mays L.) hybrids transformed to express some or all of the lepidopteran insect-resistant traits present in SmartStax corn hybrids were evaluated for insecticidal efficacy against a wide range of lepidopteran corn pests common to the northern United States, during 2008 to

  2. The U2U Corn Growing Degree Day tool: Tracking corn growth across the US Corn Belt

    Directory of Open Access Journals (Sweden)

    James R. Angel

    2017-01-01

    Full Text Available The Corn Growing Degree Day (Corn GDD tool is a web-based product that can provide decision support on a variety of issues throughout the entire growing season by integrating current conditions, historical climate data, and projections of Corn GDD through the end of the growing season based on both National Weather Service computer model forecasts and climatology. The Corn GDD tool can help agricultural producers make a variety of important decisions before and during the growing season. This support can include: assessing the risk of early and late frosts and freezes that can cause crop damage; comparing corn hybrid maturity requirements and Corn GDD projections to select seed varieties and plan activities such as spraying; guiding marketing decisions based on historical and projected Corn GDDs when considering forward crop pricing (i.e., futures market. The Corn GDD tool provides decision support for corn producers in the central U.S. corn-producing states. Survey results, web statistics, and user feedback indicate that this tool is being actively used by decision makers.

  3. Metabolizable energy of corn hybrids for broiler chickens at different ages

    OpenAIRE

    Kato,Reinaldo Kanji; Bertechini,Antonio Gilberto; Fassani,Edison José; Brito,Jerônimo Avito Gonçalves de; Castro,Solange de Faria

    2011-01-01

    We determined the values of apparent metabolizable (AME), apparent corrected (AMEn), true (TME) and true corrected (TMEn) energy of six corn hybrids for broiler chickens in phases 1-7, 8-14, 15-21, 22-28, 29-35 and 36-42 day-old birds, using the substitution method (40%) of reference diet with the test ingredient. Ross-308 male chicks (1,134) were allotted to metabolism cages and the number of birds per experimental unit was adjusted to suit each bird's density stage in the cage, using six re...

  4. Host Recognition Responses of Western (Family: Chrysomelidae) Corn Rootworm Larvae to RNA Interference and Bt Corn.

    Science.gov (United States)

    Zukoff, Sarah N; Zukoff, Anthony L

    2017-01-01

    Western corn rootworm Diabrotica virgifera virgifera LeConte is an important pest of corn whose larvae exhibit particular quantifiable patterns of locomotion after exposure to, and removal from, host roots and nonhost roots. Using EthoVision software, the behavior and locomotion of the western corn rootworm larvae was analyzed to determine the level of host recognition to germinated roots of differing corn hybrids containing either rootworm targeted Bt genes, RNA interference (RNAi) technology, the stack of both Bt and RNAi, or the isoline of these. The behavior of the rootworm larvae indicated a significant host preference response to all corn hybrids (with or without insecticidal traits) compared to the filter paper and oat roots. A weaker host response to the RNAi corn roots was observed in the susceptible larvae when compared to the resistant larvae, but not for the Bt + RNAi vector stack. Additionally, the resistant larvae demonstrated a weaker host response to the isoline corn roots when compared to the susceptible larvae. Although weaker, these host responses were significantly different from those observed in the negative controls, indicating that all hybrids tested do contain the contact cues necessary to elicit a host preference response by both Cry3Bb1-resistant and Cry3Bb1-susceptible larvae that would work to hinder resistance development in refuge in a bag fields. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America.

  5. CONTROL OF WESTERN CORN ROOTWORM (Diabrotica virgifera virgifera LeConte IN CORN PRODUCTION OF EASTERN CROATIA

    Directory of Open Access Journals (Sweden)

    Dražen Džoić

    2003-12-01

    Full Text Available A new insect pest - the western corn rootworm (Diabrotica virgifera virgifera LeConte was identified in Croatia in 1995. The first objective of this research was to determine the population density of all stages, except eggs in commercial cor fields. The second objective was to investigate the efficacy of three organophosphate insecticides on larvae. The experiment was conducted in Gunja, Croatia in 1999 and 2000. Treatments were commercial corn hybrids (OSSK 444, OSSK 552, Florencia, and three soil insecticides (terbuphos, chlorpyriphos-ethyl, chlormephos applied at planting. Results showed the highest number of larvae per plant (0.70 in the untreated plot of OSSK 552. In 1999, significant differences in larval numbers occurred among hybrids, but not among the insecticides. In 2000, larval numbers only differed statistically between the insecticide treatments. The highest beetles population counted per plant was 0.55 in 2000. This population level is very close to economic threshold of 0.70 beetles per plant. Significant differences in beetle numbers per plant between hybrids were only detected in 2000. Pheromone traps containing the lure, Csal♀m♂N, caught significantly more beetles than the Multigard yellow sticky-trap. Terbufos was the only soil insecticide providing a significant yield advantage to the hybrids. Based on the current value of corn and cost of insecticide, terbufos is the only soil insecticide cost-effective for growers. These studies should be conducted with other insecticides, and growers should avoid planting corn after corn in their fields.

  6. Sweet corn (Zea mays L.: Fresh ear yield in dependance of genotype and the environment

    Directory of Open Access Journals (Sweden)

    Srdić Jelena

    2016-01-01

    Full Text Available Sweet corn is used as food in the milky stage of endosperm, when its kernel is tender, succulent and sweet. It is consumed in form of fresh ears, or it is industrially processed. Breeding of sweet corn has several equally important aims that are directed by the market demands and different modes of consumption. The ear yield, in sweet corn is the most important but not the only main goal of breeding. In the two year study (2013, 2014 we observed the effect of the genotype, year and their interactions on the yields of 8 sweet corn hybrids. Two of the hybrids were commercial and six were experimental hybrids. The field experiment was arranged according to the RCBD with four replications. Hybrids were harvested 23 days after pollination, i.e. silking. Average yield in 2013 was significantly higher (12.19 t ha-1 than in 2014 (11.49 t ha- 1. In 2013 it ranged from 10.21 t ha-1 for the experimental hybrid ZP 489/1su, up to 13.52 t ha-1 for the commercial hybrid ZP 355su. In 2014 the lowest yielding hybrid was ZP 485/1su (10.14 t ha-1 while the highest yielding was ZP 486/1su (13.41 t ha-1. On average those two were also the highest (13.19 t ha-1 and the lowest yielding (10.66 t ha-1 hybrids. Statistical analysis showed that the effect of genotype and the year, as well as their interactions had significant impact on the yield performances of sweet corn hybrids.

  7. Valor nutritivo da silagem de dez híbridos de milho = Nutritional value of silage from ten corn hybrids

    Directory of Open Access Journals (Sweden)

    Geane Dias Gonçalves Ferreira

    2011-07-01

    Full Text Available Objetivou-se avaliar a composição químico-bromatológica e a digestibilidade aparente de dez híbridos de milho (DK265bm3, DK265, HS5, HS6, HTV2, HTV27, Anjou285, Mexxal, Pistache e Buxxil cultivados no INRA (Unité de Génétique et d’Amélioration des Plantes Fourragères, Lusignan-France, em parcelas de 150 m2, com trêsrepetições. Para o estudo de digestibilidade in vivo, os ovinos foram alimentados com silagem da planta inteira dos híbridos de milho com três repetições. Os híbridos de milho foram avaliados antes de ensilados pelo método NIRS, em que se pode constatar que houve diferença (p The objective of this experiment was to evaluate the chemical-bromatological composition and apparent digestibility of ten hybrids of corn (DK265bm3, DK265, HS5, HS6, HTV2, HTV27, Anjou285, Mexxal, Pistachio and Buxxil planted at INRA (Unité of Génétique Amélioration des Plantes Fourragères, Lusignan-France, in 150 m2 areas with three replications. The digestibility study was conducted using sheep fed corn hybrid whole plant silage with three replications. Corn hybrids were evaluated before ensilage using NIRS, and a significant difference (p < 0.05 was observed among treatments for chemical composition. DK265bm3 showed higher values than other hybrids for digestibility of DM, OM, cellulose, NDF and for IVDMD.

  8. Starch degradability of dry and ensiled high-moisture grains of corn hybrids with different textures at different grinding degrees

    OpenAIRE

    Wagner dos Reis; Ciniro Costa; Paulo Roberto de Lima Meirelles; Marina Gabriela Berchiol da Silva; Marco Aurélio Factori; Cristiano Magalhães Pariz; Simony Alves Mendonça; Erikelly Aline Ribeiro de Santana

    2011-01-01

    This research evaluated corn grains with flint and dent texture (ensiled high-moisture or dried), submitted to grinding degrees, using the in situ ruminal degradation technique. Three rumen canulated adult sheeps were used in a complete randomized design, using a factorial outline 2 x 2 x 3, with two corn hybrids (flint and dent texture), two conservation methods (ensiled high-moisture and dry) and three grinding degress (whole, coarsely and finely ground, corresponding to the sieve of 12; 10...

  9. Degradability of dry matter and crude protein of dry grains and wet grain silages from different processing corn hybrids (Zea mays

    Directory of Open Access Journals (Sweden)

    Wagner dos Reis

    2013-03-01

    Full Text Available The objective of this work was to evaluate the effect of processing two corn hybrids conserved, dry and humid grains, the dry matter (DM and crude protein (CP degradability in situ. The particle size was determined and difference was verified in MGD (Medium Geometric Diameter of processed ingredients. Three sheep were used with rumen canulated, in a completely randomized design, using a factorial outline 2 x 2 x 3, being two corn hybrid, two conservation methods and three processing forms (whole, coarsely and finely ground, with five times of incubation (3, 6, 12, 24 and 48 hours. The fraction A in SDC (silage of dent corn of DM was superior to GDC (grain of dent corn in all of the particles size. The ensiling process increased the DM solubility, reducing the fraction B in comparison to dry grain. The values regarding the fractions DP and DE the 5% per hour of the protein, were larger for SDC and GDC, it presents a decreasing when the incubation time advances. The fermentation rate was superior for SDC and GDC. The ensiling process has positive effect in the decreasing of DM and CP in comparison to GDC.

  10. Ingestive behavior of Nellore steers in feedlot fed with diets containing different corn hybrids

    Directory of Open Access Journals (Sweden)

    Ivone Yurika Mizubuti

    2014-02-01

    Full Text Available The objective of this work was to study the feeding behavior of Nellore beef cattle in feedlot fed with diets containing different corn hybrids. Twenty-seven animals averaging 350 ± 24 kg of body weight and 24 months of age, were used. The animals were distributed in a completely randomized design with three treatments (T, where, T1-TDFC: total diet containing flint corn, T2-TDSFC: total diet containing semi-flint corn and T3-TDSDC: total diet containing semi-dent corn, with 9 replicates per treatment. The animals were fed ad libitum twice a day (at 8:00am and 4:00pm with a isocaloric and isonitrogenous diet, with 30% of sugar cane bagasse and 70% concentrate (88% maize, 8% soybean meal, 3% mineral and vitamin supplement and 1% urea for 95 days (14 days of adaptation and 3 experimental periods of 27 days each. The animals were weighed at the beginning of the experiment and after each period of 27 days, always in a fasting period of 16 hours. The evaluation of animals feeding behavior occurred at the last day of each period by visual observation every five minutes for full periods of 24 hours. Observations were made in four shifts: morning (06:00 to 12:00, afternoon (12:00 to 18:00, evening (18:00 to 00:00 and early morning (00:00 06:00 to determine the number of ruminal bolus, chewing time, total feeding time, total ruminating standing time, total ruminating lying time, total standing idle time and total lying idle time. During the night’s observations, the stalls received artificial illumination to facilitate the data collection and the animals were adapted with light at night for three days before observations. Animals fed with diets containing semi-dent corn had longer chew time and more ruminal bolus than those fed with flint corn, but did not differ from those that received semi-flint corn in the diet. The chewing time and number of ruminal bolus varied with the observation periods, being higher in the morning and decreasing in the

  11. Corn silage from corn treated with foliar fungicide and performance of Holstein cows.

    Science.gov (United States)

    Haerr, K J; Lopes, N M; Pereira, M N; Fellows, G M; Cardoso, F C

    2015-12-01

    Foliar fungicide application to corn plants is used in corn aimed for corn silage in the dairy industry, but questions regarding frequency of application and its effect on corn silage quality and feed conversion when fed to dairy cows remain prevalent. The objective of this study was to evaluate the effects of various foliar fungicide applications to corn on dry matter intake (DMI), milk production, and milk composition when fed to dairy cows. Sixty-four Holstein cows with parity 2.5±1.5, 653±80kg of body weight, and 161±51d in milk were blocked and randomly assigned to 1 of 4 corn silage treatments (total mixed ration with 35% of the dry matter as corn silage). Treatments were as follows: control (CON), corn silage with no applications of foliar fungicide; treatment 1 (1X), corn silage from corn that received 1 application of pyraclostrobin (PYR) foliar fungicide (Headline; BASF Corp.) at corn vegetative stage 5; treatment 2 (2X), corn silage from corn that received the same application as 1X plus another application of a mixture of PYR and metconazole (Headline AMP; BASF Corp.) at corn reproductive stage 1 ("silking"); and treatment 3 (3X), corn silage from corn that received the same applications as 2X as well as a third application of PYR and metconazole at reproductive stage 3 ("milky kernel"). Corn was harvested at about 32% dry matter and 3/4 milk line stage of kernel development and ensiled for 200d. Treatments were fed to cows for 5wk, with the last week being used for statistical inferences. Week -1 was used as a covariate in the statistical analysis. Dry matter intake tended to be lower for cows fed corn silage treated with fungicide than CON (23.8, 23.0, 19.5, and 21.3kg for CON, 1X, 2X, and 3X, respectively). A linear treatment effect for DMI was observed, with DMI decreasing as foliar fungicide applications increased. Treatments CON, 1X, 2X, and 3X did not differ for milk yield (34.5, 34.5, 34.2, and 34.4kg/d, respectively); however, a trend for

  12. Evaluation and Comparison of Environmental Indicators of Hybrid Corn (Zea mays L. Production by Three Different Harvesting Methods in Alborz Province using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Majid Khanali

    2018-02-01

    Full Text Available Introduction Agriculture itself serves a dual role as an energy user and also energy supplier in the form of bio-energy. Recently, the energy use in agriculture has been intensified in response to the rising population, the increasing of standards of living and the limitation sources of energy. Efficient use of energy is a possible pathway for reducing the environmental impacts of energy inputs in agriculture, and providing sustainable agricultural production, since it brings financial savings, fossil resources preservation and air pollution reduction. Life cycle assessment (LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impacts of a product system throughout its life cycle. Hybrid seed in agriculture is produced by cross-pollinated plants. Hybrid seed production is one of the main contributors to the dramatic rise in agricultural output during the last half of the 20th century. The alternatives to hybridization are open pollination and cloonal propagation. All of the hybrid seeds planted by the farmer will produce similar plants while the seeds of the next generation from those hybrids will not consistently have the desired characteristics. Controlled hybrids provide very uniform characteristics because they are produced by crossing two inbred strains. Materials and Methods The purpose of this study was to compare the energy consumption pattern and environmental consequences caused by the use of agricultural inputs in the production of seed corn harvested by hand, combine and picker husker. Information required was prepared by the questionnaire method in Alborz Province using census the total producers of hybrid corn in the Province. The investigated inputs were labor, agricultural machinery, diesel fuel, chemical pesticides, fertilizers, gas, electricity, water and seed. The energy of each input was calculated by multiplying the amount of that input with its energy equivalent. The ten

  13. Asian corn borer (ACB) and non-ACB pests in GM corn (Zea mays L.) in the Philippines.

    Science.gov (United States)

    Afidchao, Miladis M; Musters, C J M; de Snoo, Geert R

    2013-07-01

    The Asian corn borer (ACB), Ostrinia furnacalis (Guenée), has become the most damaging pest in corn in south-east Asia. Corn farmers in the Philippines have incurred great yield losses in the past decades because of ACB infestation. Bacillus thuringiensis (Bt) and Bt herbicide-tolerant (BtHT) corns have been developed to reduce borer attacks worldwide. This study assessed the extent of ACB and non-ACB pest infestations in both GM and non-GM corn in Isabela Province, the Philippines. Specific aims were to reinvestigate the efficacy of Bt corn in controlling ACB, to evaluate what parts of Bt corn plants are susceptible to ACB, to monitor the potential development of ACB resistance and to evaluate whether secondary pests dominate in an ACB-free Bt corn environment. The study involved preparatory interviews with farmers, site selection, field scouting and visual inspection of 200 plants along 200 m transect lines through 198 cornfields. Bt corn can efficiently reduce the ACB pest problem and reduce borer damage by 44%, to damage levels in Bt and BtHT corn of 6.8 and 7% respectively. The leaves of Bt corn were more susceptible, while cobs of Bt corn were less affected by ACB. Non-ACB pests were common in Bt toxin-free cornfields and reduced in non-GM cornfields where ACB was abundant. No secondary pest outbreaks were found in ACB-free Bt cornfields. Bt and BtHT corn hybrids containing the Cry1Ab protein performed well in Isabela Province. Reduced cob damage by ACB on Bt fields could mean smaller economic losses even with ACB infestation. The occurrence of ACB in Bt and BtHT cornfields, although at a moderate and insignificant level, could imply the potential development of resistance to Bt toxin. © 2012 Society of Chemical Industry.

  14. Effects of Drought Stress on Vegetative and Reproductive Stages of Forage and Kernel Corn Hybrids

    Directory of Open Access Journals (Sweden)

    M Hajibabaei

    2016-10-01

    Full Text Available Introduction Maize is one of the most important cereals which its global production is severely affected by drought in many parts of the world. One of the best ways of water management on field is to choose the proper variety which could be chosen indirectly by the traits affecting the grain yield. Materials and Methods In order to study the effect of drought stress in vegetative and reproductive stages in 14 corn hybrids, an experiment was conducted at the experimental field of Seed and Plant Improvement Institute of Karaj, in 2009. The Research Station located in 50°, 55´ eastern latitude and 35°, 47´ northern longitude with 1254 height above mean sea level (AMSL. The soil texture of the location was loam-clay with pH= 7.5 and the Electrical Capacity (EC = 0.7 dsm-1. The experiment was carried out using split-plot in a randomized complete block design (RCBD with three replications. The main plots consisted of three levels of irrigation regimes (irrigation after 70, 100 and 130 mm cumulative evaporation from evaporation pan class A and sub-plots included 14 new corn hybrids Includes eleven new hybrids such as (K47/2-2-1-4-1-1-1×MO17، K3653/2×K19، KLM76004/3-2-1-1-1-1-1-1×K3545/6، K3653/2×MO17، K74/2-2-1-2-1-1-1-1×K3545/6، K47/3-1-2-7-1-1-1×MO17، K47/2-2-1-2-2-1-1-1×K3544/1، KLM76004/3-2-1-1-1-1-1-1×K3544/1، K47/2-2-1-2-1-1-1-1×K3544/1، KLM77029/8-1-2-3-2-3×MO17 and KLM76005/2-3-1-1-1-1×MO17 and three hybrid control (KSC704, KSC720, KSC700. Irrigation time was determined using daily evaporation rate of standard class A evaporation pan. To determine the volume of water per irrigation, a sample of each plot from depth of root development was prepared before irrigation. The samples were kept in oven 80°C for 24 hours. The weight of soil moisture content was calculated and the volume of water per irrigation was calculated using equations 1 and 2. 1: H = ρb (F.C - m D 2: V = H × A Where H is the water height in the

  15. Diallel analysis of corn for special use as corn grits: determining the main genetic effects for corn gritting ability.

    Science.gov (United States)

    Conrado, T V; Scapim, C A; Bignotto, L S; Pinto, R J B; Freitas, I L J; Amaral, A T; Pinheiro, A C

    2014-08-26

    Corn grits are used for various purposes such as flakes, snacks, livestock feed, hominy, extruded products, beer, etc. The grit size proportion varies according to the hybrid, and thus, once the use of the grits is linked to the particle size, determining the genetic effects is essential to develop hybrids for any specific use. For this purpose a complete diallel series of crosses, involving eight parents, was performed near Maringá, PR, Brazil. The objective of this study was to evaluate the general (GCA) and specific (SCA) combining abilities of 28 progeny for selection of hybrids for breeding programs and extraction of inbred lines for hybrid development. The response variables, such as plant height, ear insertion height, crop stand, grain yield, and grits, small grits and bran production, were gauged and appraised for each of the 28 progeny. The trait effects and GCA were significant for all response variables, while for SCA, only grain yield and crop stand showed significance (P < 0.05), according to Griffing (1955) analysis. A significant weak negative partial correlation was found between grain yield and grits conversion. In relation to the hybrid selection for breeding programs, the parent IAC Nelore was highly recommended for recurrent selection and the hybrids IPR 119 x HT 392 and IAC Nelore x HD 332 for the extraction of pure lines for hybrid development.

  16. 7 CFR 457.152 - Hybrid seed corn crop insurance provisions.

    Science.gov (United States)

    2010-01-01

    ... that chart is used to determine the approved yield and the claim for indemnity. Certified seed test. A warm germination test performed on clean seed according to specifications of the “Rules for Testing... germination rate of at least 80 percent as determined by a certified seed test. Shelled corn. Kernels that...

  17. THE EFFECT OF EXPIRED BREAD MEAL AS CORN SUBSTITUTION IN DIET ON BROILER PERFORMANCE

    Directory of Open Access Journals (Sweden)

    S. Kismiati

    2014-10-01

    Full Text Available An experiment was conducted to investigate the expired bread meal used as corn substitution in thebroiler diets to optimally the product performance. One hundred day old chick (DOC male broilerswere given the same diet until 2 weeks old, and then given the treatment diet until 7 weeks of age. ACompletely Randomized Design was used in this study. Data were analyzed by variance of analysis, andfollowed by Duncan’s Multiple Range Test The treatments were : T0 = control feed (without expiredbread meal, T1 = corn substituted with 10% expired bread meal, T2 = corn substituted with 20%expired bread meal, T3 = corn substituted with 30% expired bread meal and T4 = corn substituted with40% expired bread meal. The result indicated that corn substituted with expired bread meal up to 40%has not significantly affected on carcass weight, carcass percentage and feed conversion, but decreasedsignificantly on feed consumption and body weight gain. It can be concluded that the use of expiredbread meal 30% of the proportion of corn produced the most optimal broiler performance. Thesubstitution corn with expired bread meal 40% was decreased body weight gain.

  18. Performance of japanese quails fed feeds containing different corn and limestone particle sizes

    Directory of Open Access Journals (Sweden)

    DA Berto

    2007-09-01

    Full Text Available This study aimed at evaluating performance and egg quality of Japanese quails fed feeds containing different corn and limestone particle sizes. A total number of 648 birds in the peak of production was distributed in a random complete block experimental design, using a 2x3 factorial arrangement (2 corn particle sizes and 3 limestone particle sizes. Birds were designated to one of two blocks, with six replicates of 18 birds each. Mean geometric diameter (MGD values used were 0.617mm and 0.723mm (corn fine and coarse particle sizes, respectively, and 0.361mm, 0.721mm, and 0.947mm (limestone fine, intermediate and coarse particle sizes, respectively. The following treatments were applied: T1: fine corn feed, with 100% fine limestone; T2: fine corn feed, with 50% fine limestone and 50% intermediate limestone; T3: fine corn feed, with 50% fine limestone and 50% coarse limestone; T4: coarse corn feed, with 100% fine limestone; T5: coarse corn feed, with 50% fine limestone and 50% intermediate limestone; T6: coarse corn feed, with 50% fine limestone and 50% coarse limestone. The experiment lasted 112 days, consisting of 4 cycles of 28 days. No significant interaction was observed among corn and limestone particle sizes for any of the analyzed parameters. There were no significant effects (p>0.05 of the tested corn particle sizes on quail performance or egg quality. There were significant (p<0.05 isolated effects of limestone particle size only on the percentage of cracked eggs, which was reduced when birds fed 50% coarse limestone (0.947mm and 50% fine limestone (0.361mm as compared to those fed 100% fine limestone. Therefore, the inclusion of 50% coarse limestone (0.947mm is recommended for quail egg production.

  19. Mycoflora and aflatoxin/fumonisin production by fungal isolates from freshly harvested corn hybrids

    Directory of Open Access Journals (Sweden)

    Almeida Adriana P.

    2000-01-01

    Full Text Available The mycoflora of 3 hybrids of freshly harvested corn grains collected from three regions of the state of São Paulo, Brazil (Assis, Capão Bonito and Ribeirão Preto was investigated. A total of 66 samples were analyzed focusing on the influence of abiotic factors (moisture content, water activity, temperature and rainfall on both the prevalence of Aspergillus flavus and Fusarium moniliforme, and the ability of these genera isolates to produce aflatoxins and fumonisins, respectively. In the three surveyed regions, the fungal population comprised mainly Fusarium spp., Penicillium spp., Aspergillus spp. and 2 others filamentous fungal genera, which were isolated from corn kernels showing water activity of 0.30 to 0.99 and moisture content of 5.0% to 20.2%. Among the genera Fusarium and Aspergillus, the most frequent species were F. moniliforme and A. flavus, respectively. Concerning the toxigenic potential of F. moniliforme, all isolated strains (40 produced fumonisins at 20 mug/g to 2168 mug/g (FB1 and/or 10 mug/g to 380 mug/g (FB2. From the 10 A. flavus isolates, 6 strains (60.0% produced aflatoxins at 615 mug/kg to 30.750 mug/kg (AFB1 and/or 11 mug/kg to 22 mug/kg (AFB2.

  20. Sublethal effects of Cry 1F Bt corn and clothianidin on black cutworm (Lepidoptera: Noctuidae) larval development.

    Science.gov (United States)

    Kullik, Sigrun A; Sears, Mark K; Schaafsma, Arthur W

    2011-04-01

    Black cutworm, Agrotis ipsilon (Hufnagel) (Lepidoptera: Noctuidae), is an occasional pest of maize (corn), Zea mays L., that may cause severe stand losses and injury to corn seedlings. The efficacy of the neonicotinoid seed treatment clothianidin at two commercially available rates and their interaction with a transgenic corn hybrid (Bt corn), trait expressing the Bacillus thuringiensis variety aizawai insecticidal toxin Cry 1Fa2, against black cutworm larvae was investigated. Clothianidin at a rate of 25 mg kernel(-1) on Bt corn increased larval mortality and reduced larval weight gains additively. In contrast, weights of larvae fed non-Bt corn seedlings treated with clothianidin at a rate of 25 mg kernel(-1) increased significantly, suggesting either compensatory overconsumption, hormesis, or hormoligosis. Both Bt corn alone and clothianidin at a rate of 125 mg kernel(-1) applied to non-Bt corn seedlings caused increased mortality and reduced larval weight gains. In two field trials, plots planted with Bt corn hybrids consistently had the highest plant populations and yields, regardless of whether they were treated with clothianidin at the lower commercial rate of 25 mg kernel(-1) The use of Bt corn alone or in combination with the low rate of clothianidin (25 mg kernel(-1)) seems suitable as a means of suppressing black cutworm in no-tillage cornfields, although rescue treatments may still be necessary under severe infestations. Clothianidin alone at the low rate of 25 mg kernel(-1) is not recommended for black cutworm control until further studies of its effects on larval physiology and field performance have been completed.

  1. Comparisons of Herbicide Treated and Cultivated Herbicide-Resistant Corn

    Directory of Open Access Journals (Sweden)

    H. Arnold Bruns

    2010-01-01

    Full Text Available Four glyphosate resistant corn (Zea mays L. hybrids, a glufosinate-ammonium resistant hybrid, and a conventional atrazine resistant hybrid gown at Stoneville, MS in 2005, 2006, and 2007 with furrow irrigation were treated with their respective herbicides and their growth, yield, and mycotoxin incidence were compared with untreated cultivated plots. Leaf area index (LAI and dry matter accumulation (DMA were collected on a weekly basis beginning at growth stage V3 and terminating at anthesis. Crop growth rates (CRGs and relative growth rates (RGRs were calculated. Plots were later harvested, yield and yield component data collected, and kernel samples analyzed for aflatoxin and fumonisin. Leaf area index, DMA, CRG, and RGR were not different among the herbicide treated plots and from those that were cultivated. Curves for LAI and DMA were similar to those previously reported. Aflatoxin and fumonisin were relatively low in all plots. Herbicide application or the lack thereof had no negative impact on the incidence of kernel contamination by these two mycotoxins. Herbicides, especially glyphosate on resistant hybrids, have no negative effects on corn yields or kernel quality in corn produced in a humid subtropical environment.

  2. Impact of transgenic sweet corn silks to two noctuid pests

    Science.gov (United States)

    Eight Bacillus thuringiensis (Bt) transgenic sweet corn hybrids were evaluated (with two controls) for their efficacy against two ear-feeding insects; the corn earworm [Helicoverpa zea (Boddie) (Lepidoptera: Noctuidae)], and the fall armyworm (Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuid...

  3. Field-Evolved Resistance in Corn Earworm to Cry Proteins Expressed by Transgenic Sweet Corn

    Science.gov (United States)

    Dively, Galen P.; Finkenbinder, Chad

    2016-01-01

    Background Transgenic corn engineered with genes expressing insecticidal toxins from the bacterium Bacillus thuringiensis (Berliner) (Bt) are now a major tool in insect pest management. With its widespread use, insect resistance is a major threat to the sustainability of the Bt transgenic technology. For all Bt corn expressing Cry toxins, the high dose requirement for resistance management is not achieved for corn earworm, Helicoverpa zea (Boddie), which is more tolerant to the Bt toxins. Methodology/Major Findings We present field monitoring data using Cry1Ab (1996–2016) and Cry1A.105+Cry2Ab2 (2010–2016) expressing sweet corn hybrids as in-field screens to measure changes in field efficacy and Cry toxin susceptibility to H. zea. Larvae successfully damaged an increasing proportion of ears, consumed more kernel area, and reached later developmental stages (4th - 6th instars) in both types of Bt hybrids (Cry1Ab—event Bt11, and Cry1A.105+Cry2Ab2—event MON89034) since their commercial introduction. Yearly patterns of H. zea population abundance were unrelated to reductions in control efficacy. There was no evidence of field efficacy or tissue toxicity differences among different Cry1Ab hybrids that could contribute to the decline in control efficacy. Supportive data from laboratory bioassays demonstrate significant differences in weight gain and fitness characteristics between the Maryland H. zea strain and a susceptible strain. In bioassays with Cry1Ab expressing green leaf tissue, Maryland H. zea strain gained more weight than the susceptible strain at all concentrations tested. Fitness of the Maryland H. zea strain was significantly lower than that of the susceptible strain as indicated by lower hatch rate, longer time to adult eclosion, lower pupal weight, and reduced survival to adulthood. Conclusions/Significance After ruling out possible contributing factors, the rapid change in field efficacy in recent years and decreased susceptibility of H. zea to Bt

  4. Development of a performance-based industrial energy efficiency indicator for corn refining plants.

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, G. A.; Decision and Information Sciences; USEPA

    2006-07-31

    Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing their plant's performance with that of similar plants in the same industry. Manufacturing facilities can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the corn refining industry to provide a plant-level indicator of energy efficiency for facilities that produce a variety of products--including corn starch, corn oil, animal feed, corn sweeteners, and ethanol--for the paper, food, beverage, and other industries in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for corn refining plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

  5. Effect of feeding varying levels of corn cob meal on the performance ...

    African Journals Online (AJOL)

    One hundred and twenty (120) Anak broiler birds were used to study the effect offeeding Corn cob meal on the growth performance, organ weights and serum metabolites. The birds were divided into 4 treatment groups. Four finisher diets were formulated with 0, 5, 10 and 15% Corn cob meal inclusion and fed to the birds in ...

  6. Analysis of Traits Related to Weed Competitiveness in Sweet Corn (Zea mays L.

    Directory of Open Access Journals (Sweden)

    Natalia de Leon

    2012-03-01

    Full Text Available Weed management in sweet corn can be costly; genetic improvements in sweet corn competitiveness may reduce this expense. Competitive ability can exist as weed suppressive ability (WSA, or crop tolerance (CT. Previous studies in corn have found year of hybrid release, maturity, plant height, leaf angle and leafiness may affect WSA, while hybrid era, maturity, and plant height may affect CT. However, many of these studies were limited to very few genotypes. The objective of this study was to assess the effects of phenomorphological traits on sweet corn competitiveness and the inheritance of these traits. An incomplete half-diallel from seven historic sweet corn inbred lines of varying morphologies was evaluated in a split-block randomized complete block design in three environments. Forage sorghum was interplanted in half of the blocks to act as a model weed. Significant differences among hybrids were generally found for both phenomorphological traits and traits measuring WSA and CT, such as sorghum biomass and yield stability, respectively. Crop plant height was most predictive of WSA and CT. In this set of genotypes, competitive ability may be passed with reasonable fidelity from parent to offspring, suggesting that sweet corn could be bred for competitive ability.

  7. Total Content of Carotenoids in Corn Landraces and Their Potential Health Applications

    Directory of Open Access Journals (Sweden)

    Stăncuța Scrob

    2014-11-01

    Full Text Available The research was designed to quantify the carotenoid compounds from the experimental variability of the corn genotypes. The experimental material for the present investigation consisted of 19 corn hybrids from Agricultural Research and Development Station (ARDSTurda, Romania. The experiment was carried out during two seasons 2011 and 2012. Corn hybrids Turda 215, Mold Turda 188, Turda 200, Turda SU 181 and HS 105 were noticed by the fact that in the year of culture 2012, they showed a beginning of accumulation of total content of carotenoids more than 27 µg/g DW as compared to 15 µg/g DW corresponding to the year o culture 2011 due to soil and climate conditions favoring the accumulation of carotenoid compounds. According to our study, the highest concentration of TC was recorded in light yellow, dark yellow and orange hybrids.

  8. Integration of biological control and transgenic insect protection for mitigation of mycotoxins in corn

    Science.gov (United States)

    Biological control is known to be effective in reducing aflatoxin contamination of corn and some transgenic corn hybrids incur greatly reduced damage from corn earworm (Helicoverpa zea). We conducted seven field trials over two years to test the hypothesis that transgenic insect protection and biol...

  9. Comparison of the forage and grain composition from insect-protected and glyphosate-tolerant MON 88017 corn to conventional corn (Zea mays L.).

    Science.gov (United States)

    McCann, Melinda C; Trujillo, William A; Riordan, Susan G; Sorbet, Roy; Bogdanova, Natalia N; Sidhu, Ravinder S

    2007-05-16

    The next generation of biotechnology-derived products with the combined benefit of herbicide tolerance and insect protection (MON 88017) was developed to withstand feeding damage caused by the coleopteran pest corn rootworm and over-the-top applications of glyphosate, the active ingredient in Roundup herbicides. As a part of a larger safety and characterization assessment, MON 88017 was grown under field conditions at geographically diverse locations within the United States and Argentina during the 2002 and 2003-2004 field seasons, respectively, along with a near-isogenic control and other conventional corn hybrids for compositional assessment. Field trials were conducted using a randomized complete block design with three replication blocks at each site. Corn forage samples were harvested at the late dough/early dent stage, ground, and analyzed for the concentration of proximate constituents, fibers, and minerals. Samples of mature grain were harvested, ground, and analyzed for the concentration of proximate constituents, fiber, minerals, amino acids, fatty acids, vitamins, antinutrients, and secondary metabolites. The results showed that the forage and grain from MON 88017 are compositionally equivalent to forage and grain from control and conventional corn hybrids.

  10. THE EUROPEAN CORN BORER (OSTRINIA NUBILALIS HÜBNER REVIEW OF RESULTS FROM CROATIA

    Directory of Open Access Journals (Sweden)

    Marija Ivezić

    2001-06-01

    Full Text Available European Corn Borer (ECB - (Ostrinia nubilalis Hübner is one of the most important pest on corn in Croatia. In the last decade corn production was on over 400 000 ha, in Eastern Croatia. Although ECB is present every year, with no such a low intensity, their control is not implemented. Corn is grown in monoculture, at 40% of cornfields, which also has influence on spreading of ECB. In the last ten years average attack of ECB was 51.5%; been done three different kinds of trials for controlling ECB. First trials were carried out in DeKalb hybrids, and ECB was controlled by Biobit XL, on the base of Bacillus thuringiensis Berliner. Intensity of attack was decreased for 46%. Second trial was carried out in ten hybrids, in order to determine the tolerance of hybrids against ECB. It was identified that several domestic hybrids (OSSK 382, OSSK 664 and BC 462 are tolerant to ECB. The third trial was carried out with GM hybrids. Experiments included Pioneer hybrids Evelina Bt, and Landia Bt. Intensity of attack at Evelina standard was 52%, while in Evelina Bt, ECB wasn't present at all. At Landia standard ECB was present on 98%, while in Landia Bt, intensity of attack was 21%. At both Bt hybrids, number of larvae and tunnels was lower comparing to standard hybrids. Length of damage in Landia check was 20.66 cm, while in Landia Bt it was 0.45 cm. The yield was increased for 10.27% at Evelina Bt, and for 26.67% in Landia Bt comparing to their standards. This kind of experiments will be continued in the future, not only because of its agronomic importance, but also because of its ecological relevance.

  11. Avaliação de híbridos de milho obtidos do cruzamento entre linhagens com diferentes níveis de degradabilidade da matéria seca Performance of corn hybrids obtained from crosses of lines with different dry matter degradabilities

    Directory of Open Access Journals (Sweden)

    Marcelo Cruz Mendes

    2008-01-01

    matter degradation (DEF of the whole plant. This investigation had the objective of evaluating agronomic, bromatologic, and rumen degradability of dry matter of commercial corn hybrids, recommended for silage production, and also experimental hybrids from crosses of lines of high and low degradability. It was evaluated the performance of eighteen experimental hybrids and five commercial hybrids recommend for silage production. The experiment was established in 2003/2004 crop season in randomized block design with three replications. The experimental plot was constituted of four rows 5.0 meters long. Corn plants were harvested at 20 cm from soil level at milk line at half grain stage. The silages were incubated in situ for 0, 6, 12, 24 and 96 hours in the rumen of three fistulated cows. Effective degradability was calculated based on 0.05%/h of passage rate. It was observed that among cultivars there were hybrids, that present good potential for silage production with high effective matter degradation (DEF of the whole plant, independently of grain texture. The strategy of synthesizing hybrids aiming at high dry matter effective degradability based on lines with high DEF is correct. The low correlation between effective degradability with a agronomic, and bromatologic characteristics indicate the need for better use of DEF in order to select corn hybrids of high quality of silage production.

  12. Meta-analysis of yield response of hybrid field corn to foliar fungicides in the U.S. Corn Belt.

    Science.gov (United States)

    Paul, P A; Madden, L V; Bradley, C A; Robertson, A E; Munkvold, G P; Shaner, G; Wise, K A; Malvick, D K; Allen, T W; Grybauskas, A; Vincelli, P; Esker, P

    2011-09-01

    The use of foliar fungicides on field corn has increased greatly over the past 5 years in the United States in an attempt to increase yields, despite limited evidence that use of the fungicides is consistently profitable. To assess the value of using fungicides in grain corn production, random-effects meta-analyses were performed on results from foliar fungicide experiments conducted during 2002 to 2009 in 14 states across the United States to determine the mean yield response to the fungicides azoxystrobin, pyraclostrobin, propiconazole + trifloxystrobin, and propiconazole + azoxystrobin. For all fungicides, the yield difference between treated and nontreated plots was highly variable among studies. All four fungicides resulted in a significant mean yield increase relative to the nontreated plots (P pyraclostrobin (256 kg/ha), and lowest for azoxystrobin (230 kg/ha). Baseline yield (mean yield in the nontreated plots) had a significant effect on yield for propiconazole + azoxystrobin (P pyraclostrobin, propiconazole + trifloxystrobin, and propiconazole + azoxystrobin but not to azoxystrobin. Mean yield difference was generally higher in the lowest yield and higher disease severity categories than in the highest yield and lower disease categories. The probability of failing to recover the fungicide application cost (p(loss)) also was estimated for a range of grain corn prices and application costs. At the 10-year average corn grain price of $0.12/kg ($2.97/bushel) and application costs of $40 to 95/ha, p(loss) for disease severity pyraclostrobin, 0.62 to 0.93 for propiconazole + trifloxystrobin, 0.58 to 0.89 for propiconazole + azoxystrobin, and 0.91 to 0.99 for azoxystrobin. When disease severity was >5%, the corresponding probabilities were 0.36 to 95, 0.25 to 0.69, 0.25 to 0.64, and 0.37 to 0.98 for the four fungicides. In conclusion, the high p(loss) values found in most scenarios suggest that the use of these foliar fungicides is unlikely to be profitable when

  13. Biomass in monospecific and mixed stands of eucalyptus and black wattle and corn in an agroforestry system

    Directory of Open Access Journals (Sweden)

    Márcio Viera

    2011-06-01

    Full Text Available This study aimed at quantifying the production and distribution of aboveground biomass from the plants in monospecific and mixed stands of eucalyptus (hybrid E. urophylla x E. grandis and black wattle (Acacia mearnsii and, of corn (Zea mays in agrosilvicultural systems. The biomass evaluation (leaf, branch, bark and wood from the forest species at 6 and 18 months of age were performed at the treatments: 100E (100% of eucalyptus + corn; - 100A (100% of black wattle + corn; - 50E:50A (50% of eucalyptus + 50% of black wattle + corn. The corn biomass evaluation (stem, leaves, straw, cob and grains was performed at treatments 100E; 100A; 50E:50A; 75E:25A (75% of eucalyptus + 25% of black wattle + corn; and - 25E:75A (25% of eucalyptus + 75% of black wattle + corn. The biomass production from eucalyptus and from the black wattle, in both monospecific and mixed planting, did not differ in any of the assessed ages but, when evaluated by plants compartments, it was verified an interspecific competitive interaction from the eucalyptus on the black wattle, reducing the formation of crown biomass. The total production of corn biomass in agrosilvicutural systems with eucalyptus and with black wattle in monospecific or mixed plantings did not differ in the studied treatments.

  14. Economic cost: Effectiveness of different nitrogen application in the production of corn on chernozems soil

    Directory of Open Access Journals (Sweden)

    Živanović Ljubiša

    2015-01-01

    Full Text Available The aim of this study is to determine the optimum quantity of nitrogen applied in corn production at which maximum profit is achieved. Optimal nitrogen application is important for two main reasons: first for achieving maximum profitability in the production of maize and other is to avoid environmental pollution as the nitrogen is one of the main polluters. In the three-year period (2005 - 2007 were performed research on the effects of nitrogen quantity (control - without fertilization, PKNfon, PKN60, PKN120 and PKN180 and hybrids of different vegetation length (ZPSC 434 ZPSC ZPSC 578 and 677 on yield and profitability. Increasing application of nitrogen tended to raise grain yield by 9.9 - 13.5%. The lowest average corn grain yield (9.49 t ha-1 was registered with the hybrid ZP 434. It was somewhat higher (9.75 t ha-1 with the hybrid ZP 578 and the highest corn grain yield (10.03 t ha-1 with ZP 677. Study shows that highest yield is not always most profitable. In production year with good water supply (2005 highest profit is achieved with moderate use of nitrogen (60 kg ha-1. In draught production years (2006 and 2007 highest profit was achieved with application of 60 to 120 kg ha-1.

  15. Baby corn, green corn, and dry corn yield of corn cultivars

    OpenAIRE

    Castro,Renato S; Silva,Paulo Sérgio L; Cardoso,Milton J

    2013-01-01

    In corn, when the first female inflorescence is removed, the plant often produces new female inflorescences. This allows the first ear to be harvested as baby corn (BC) and the second as green corn (GC) or dry corn (DC), that is, mature corn. The flexibility provided by a variety of harvested products allows the grower to compete with better conditions in the markets. We evaluated BC, GC, and DC yields in corn cultivars AG 1051, AG 2060, and BRS 2020, after the first ear was harvested as BC. ...

  16. Comparison of fumonisin contamination using HPLC and ELISA methods in bt and near-isogenic maize hybrids infested with European corn borer or western bean cutworm.

    Science.gov (United States)

    Bowers, Erin; Hellmich, Richard; Munkvold, Gary

    2014-07-09

    Field trials were conducted from 2007 to 2010 to compare grain fumonisin levels among non-Bt maize hybrids and Bt hybrids with transgenic protection against manual infestations of European corn borer (ECB) and Western bean cutworm (WBC). HPLC and ELISA were used to measure fumonisin levels. Results of the methods were highly correlated, but ELISA estimates were higher. Bt hybrids experienced less insect injury, Fusarium ear rot, and fumonisin contamination compared to non-Bt hybrids. WBC infestation increased fumonisin content compared to natural infestation in non-Bt and hybrids expressing Cry1Ab protein in five of eight possible comparisons; in Cry1F hybrids, WBC did not impact fumonisins. These results indicate that WBC is capable of increasing fumonisin levels in maize. Under WBC infestation, Cry1F mitigated this risk more consistently than Cry1Ab or non-Bt hybrids. Transgenically expressed Bt proteins active against multiple lepidopteran pests can provide broad, consistent reductions in the risk of fumonisin contamination.

  17. Comparisons of Herbicide Treated and Cultivated Herbicide-Resistant Corn

    OpenAIRE

    H. Arnold Bruns; Hamed K. Abbas

    2010-01-01

    Four glyphosate resistant corn (Zea mays L.) hybrids, a glufosinate-ammonium resistant hybrid, and a conventional atrazine resistant hybrid gown at Stoneville, MS in 2005, 2006, and 2007 with furrow irrigation were treated with their respective herbicides and their growth, yield, and mycotoxin incidence were compared with untreated cultivated plots. Leaf area index (LAI) and dry matter accumulation (DMA) were collected on a weekly basis beginning at growth stage V3 and terminating at anthesi...

  18. Aracnidae diversity in soil cultivated with corn (Zea mays

    Directory of Open Access Journals (Sweden)

    Lígia Vanessa da Silva

    2014-09-01

    Full Text Available Studies carried out on the diversity and abundance of spiders may provide a rich information base on the degree of integrity of agricultural systems where they are found. In transgenic corn, Bacillus thuringiensis proteins are expressed in great amounts in plant tissues and may affect arthropod communities. Thus, the main goal of this work was to identify the spider diversity associated to transgenic and conventional corn hybrids. Pitfall collections were performed in conventional and transgenic corn plots during the 2010/2011 crop season, at the experimental field of the Agronomy Course of the University of Cruz Alta, RS. A total of 559 spiders were collected, from which 263 were adults and 296 young individuals. In the transgenic corn 266 spiders were collected and in the conventional one 293. Eleven families were determined and the adult individuals grouped in 27 morphospecies. Families with the largest number of representatives were Linyphiidae (29.70%, Theridiidae (5.72% and Lycosidae (5.01%. The most abundant morphospecies were Lyniphiidae sp. with 77 individuals, Erigone sp. with 40 individuals, Lynyphiidae sp. with 33 individuals, Theridiidae sp. with 21 individuals, Lycosa erythrognatha with 14 individuals and Lycosidae sp. with 13 individuals. The Shannon Diversity Index was higher for transgenic corn (H” =1.01 in February and smaller (H’=0.54 in the December collection in the conventional corn, and the Margaleff Richness Index showed higher diversity in December and February for the conventional corn (M=18.3, and smaller diversity for the transgenic corn in November (M=11.3. Families were classified in five guilds; two weavers: Irregular web builders and sheet web builders, and three hunter guilds: Night soil runners, ambush spiders and aerial night runners. The relative proportion of the spiders morphospecies found in this research, as well as the guilds, suggest that this group may not have been affected by the genetically

  19. Yield and fruit quality of four sweet corn hybrids (Zea mays) under conventional and integrated fertilization with vermicompost.

    Science.gov (United States)

    Lazcano, Cristina; Revilla, Pedro; Malvar, Rosa Ana; Domínguez, Jorge

    2011-05-01

    Vermicompost has been proposed as a valuable fertilizer for sustainable agriculture. The effects of vermicompost on yield and quality of sweet corn were evaluated in this study. In two field trials, sweet corn plants were grown under (i) a conventional fertilization regime with inorganic fertilizer, and integrated fertilization regimes in which 75% of the nutrients were supplied by the inorganic fertilizer and 25% of the nutrients were supplied by either (ii) rabbit manure, or (iii) vermicompost. All three types of fertilization regime were supplied at two doses. Two pairs of nearly isogenic sweet corn hybrids homozygous for sugary1 and shrunken2 mutants were included in the trials to explore fertilizer × genotype interactions. Growth, yield and ear quality of the plants were evaluated in relation to the three fertilization regimes. In general, the integrated regimes yielded the same productivity levels as the conventional treatment. Moreover, both vermicompost and manure produced significant increases in plant growth and marketable yield, and also affected the chemical composition and quality of the marketable ear. Nevertheless, most of the observed effects of the organic fertilizers were genotype-dependent. The results confirm that the use of organic fertilizers such as vermicompost has a positive effect on crop yield and quality. Nevertheless, these effects were not general, indicating the complexity of the organic amendment-plant interactions and the importance of controlling genetic variation when studying the effects of vermicompost on plant growth. Copyright © 2011 Society of Chemical Industry.

  20. Composition of grain and forage from insect-protected and herbicide-tolerant corn, MON 89034 × TC1507 × MON 88017 × DAS-59122-7 (SmartStax), is equivalent to that of conventional corn (Zea mays L.).

    Science.gov (United States)

    Lundry, Denise R; Burns, J Austin; Nemeth, Margaret A; Riordan, Susan G

    2013-02-27

    Monsanto Company and Dow AgroSciences LLC have developed the combined-trait corn product MON 89034 × TC1507 × MON 88017 × DAS-59122-7 (SmartStax, a registered trademark of Monsanto Technology LLC). The combination of four biotechnology-derived events into a single corn product (stacking) through conventional breeding provides broad protection against lepidopteran and corn rootworm insect pests as well as tolerance to the glyphosate and glufosinate-ammonium herbicide families. The purpose of the work described here was to assess whether the nutrient, antinutrient, and secondary metabolite levels in grain and forage tissues of the combined-trait product are comparable to those in conventional corn. Compositional analyses were conducted on grain and forage from SmartStax, a near-isogenic conventional corn hybrid (XE6001), and 14 conventional reference hybrids, grown at multiple locations across the United States. No statistically significant differences between SmartStax and conventional corn were observed for the 8 components analyzed in forage and for 46 of the 52 components analyzed in grain. The six significant differences observed in grain components (p corn, as previously demonstrated for the single-event products.

  1. Comparison of brown midrib-6 and -18 forage sorghum with conventional sorghum and corn silage in diets of lactating dairy cows.

    Science.gov (United States)

    Oliver, A L; Grant, R J; Pedersen, J F; O'Rear, J

    2004-03-01

    Total mixed rations containing conventional forage sorghum, brown midrib (bmr)-6 forage sorghum, bmr-18 forage sorghum, or corn silage were fed to Holstein dairy cows to determine the effect on lactation, ruminal fermentation, and total tract nutrient digestion. Sixteen multiparous cows (4 ruminally fistulated; 124 d in milk) were assigned to 1 of 4 diets in a replicated Latin square design with 4-wk periods (21-d adaptation and 7 d of collection). Diets consisted of 40% test silage, 10% alfalfa silage, and 50% concentrate mix (dry basis). Acid detergent lignin concentration was reduced by 21 and 13%, respectively, for the bmr-6 and bmr-18 sorghum silages when compared with the conventional sorghum. Dry matter intake was not affected by diet. Production of 4% fat-corrected milk was greatest for cows fed bmr-6 (33.7 kg/d) and corn silage (33.3 kg/d), was least for cows fed the conventional sorghum (29.1 kg/d), and was intermediate for cows fed the bmr-18 sorghum (31.2 kg/d), which did not differ from any other diet. Total tract neutral detergent fiber (NDF) digestibility was greatest for the bmr-6 sorghum (54.4%) and corn silage (54.1%) diets and was lower for the conventional (40.8%) and bmr-18 sorghum (47.9%) diets. In situ extent of NDF digestion was greatest for the bmr-6 sorghum (76.4%) and corn silage (79.0%) diets, least for the conventional sorghum diet (70.4%), and intermediate for the bmr-18 sorghum silage diet (73.1%), which was not different from the other diets. Results of this study indicate that the bmr-6 sorghum hybrid outperformed the conventional sorghum hybrid; the bmr-18 sorghum was intermediate between conventional and bmr-6 in most cases. Additionally, the bmr-6 hybrid resulted in lactational performance equivalent to the corn hybrid used in this study. There are important compositional differences among bmr forage sorghum hybrids that need to be characterized to predict animal response accurately.

  2. Stochastic Corn Yield Response Functions to Nitrogen for Corn after Corn, Corn after Cotton, and Corn after Soybeans

    OpenAIRE

    Boyer, Christopher N.; Larson, James A.; Roberts, Roland K.; McClure, Angela T.; Tyler, Donald D.; Zhou, Vivian

    2013-01-01

    Deterministic and stochastic yield response plateau functions were estimated to determine the expected profit-maximizing nitrogen rates, yields, and net returns for corn grown after corn, cotton, and soybeans. The stochastic response functions were more appropriate than their deterministic counterparts, and the linear response stochastic plateau described the data the best. The profit-maximizing nitrogen rates were similar for corn after corn, cotton, and soybeans, but relative to corn after ...

  3. Reproductive sink of sweet corn in response to plant density and hybrid

    Science.gov (United States)

    Improvements in plant density tolerance have played an essential role in grain corn yield gains for ~80 years; however, plant density effects on sweet corn biomass allocation to the ear (the reproductive ‘sink’) is poorly quantified. Moreover, optimal plant densities for modern white-kernel shrunke...

  4. Health Impacts from Corn Production Pre-and Post-NAFTA Trade Agreement (1986-2013).

    Science.gov (United States)

    Mendoza-Cano, Oliver; Sánchez-Piña, Ramón Alberto; González-Ibarra, Álvaro Jesús; Murillo-Zamora, Efrén; Nava-Garibaldi, Cynthia Monique

    2016-07-13

    Life cycle assessment (LCA) is a powerful methodology for the study of health impacts and public policies. We performed this study to quantitatively explain the potential health impacts on disability-adjusted life years (DALYs) of corn produced in Mexico and imported from the United States of America (U.S.) from 1984 until 2014. The processes are hybrid and organic corn production. The functional unit was defined as 1 ton of corn production. Results indicate a total value of 178,431, 244,175, and 283,426 DALYs of three decades: 1984-1993, 1994-2003, and 2004-2013, of Mexican production; the U.S. production and transport were also calculated, showing values of 29,815, 65,837, and 107,729 for the same three decades. Additionally, DALYs were obtained for the category of human health and climate change by functional unit: 802.31 (1984-1993), 802.67 (1994-2003), and 803.92 (2004-2013), and for imported corn transported to Mexico from the U.S., 859.12 (1984-2013). DALYs on human toxicity were obtained: 99.05 (1984-1993), 99.05 (1994-2003), and 99.04 (2004-2013), and for the corn imported and transported to Mexico from the U.S., 116.25 (1984-2013). Environmental and health impacts in terms of DALYs are higher when corn is imported versus the corn produced in Mexico. Environmental health and nominal corn cultivation and transport impacts have increased as a result of the North American Free Trade Agreement (NAFTA). Mexico needs to redefine its public policies to suffer less of an environmental burden from corn to ensure global environmental health and food security.

  5. Performance of japanese quails fed feeds containing different corn and limestone particle sizes

    OpenAIRE

    Berto,DA; Garcia,EA; Móri,C; Faitarone,ABG; Pelícia,K; Molino,AB

    2007-01-01

    This study aimed at evaluating performance and egg quality of Japanese quails fed feeds containing different corn and limestone particle sizes. A total number of 648 birds in the peak of production was distributed in a random complete block experimental design, using a 2x3 factorial arrangement (2 corn particle sizes and 3 limestone particle sizes). Birds were designated to one of two blocks, with six replicates of 18 birds each. Mean geometric diameter (MGD) values used were 0.617mm and 0.72...

  6. Performance of heifers supplemented with different levels of corn on pasture

    Directory of Open Access Journals (Sweden)

    F. A. L. Gonzalez

    2016-09-01

    Full Text Available In southern Brazil, production systems are typically extensive and rely on grazing that often results in limited forage quantity and quality, decreasing efficiency and compromising reproductive tract development. The aim of this study was to evaluate the productive performance and reproductive tract development of heifers supplemented with different levels of corn on pasture. The following supplemental treatments were evaluated: T0 [40 g trace-mineralized salt per heifer per day (80 g phosphorus/kg product]; T1 [0.5% of body weight (BW cracked corn + 40 g trace-mineralized salt per heifer per day]; T2 [1% of BW cracked corn + 40 g trace-mineralized salt per heifer per day], and T3 [1.5% of BW cracked corn + 40 g trace-mineralized salt per heifer per day]. Thirty-nine phenotypically homogeneous Brangus heifers (average BW = 184±17 kg, average age = 269±27 days raised on winter pasture (Lolium multiflorum Lam. were randomized to 13 paddocks (one hectare each, with three heifers/paddock, to evaluate the effect of feeding different energy levels. Body condition score, average daily gain, frame score, dry matter availability, reproductive tract score, and stocking density were evaluated. The body condition score, average daily gain, reproductive tract score and stocking density increased (P<0.05 with increasing level of corn supplementation. Daily supplementation levels lower than 1.0% on Lolium multiflorum Lam. pasture can compromise the target breeding weight at 13 months of age. Therefore, daily supplementation at 1.0% of BW after weaning is a strategy to improve the economic and biological efficiency of livestock production systems, allowing to increase stocking density and to anticipate the age of heifers at first breeding.

  7. Corn in consortium with forages

    Directory of Open Access Journals (Sweden)

    Cássia Maria de Paula Garcia

    2013-12-01

    Full Text Available The basic premises for sustainable agricultural development with focus on rural producers are reducing the costs of production and aggregation of values through the use crop-livestock system (CLS throughout the year. The CLS is based on the consortium of grain crops, especially corn with tropical forages, mainly of the genus Panicum and Urochloa. The study aimed to evaluate the grain yield of irrigated corn crop intercropped with forage of the genus Panicum and Urochloa. The experiment was conducted at the Fazenda de Ensino, Pesquisa e Extensão – FEPE  of the Faculdade de Engenharia - UNESP, Ilha Solteira in an Oxisol in savannah conditions and in the autumn winter of 2009. The experimental area was irrigated by a center pivot and had a history of no-tillage system for 8 years. The corn hybrid used was simple DKB 390 YG at distances of 0.90 m. The seeds of grasses were sown in 0.34 m spacing in the amount of 5 kg ha-1, they were mixed with fertilizer minutes before sowing  and placed in a compartment fertilizer seeder and fertilizers were mechanically deposited in the soil at a depth of 0.03 m. The experimental design used was a randomized block with four replications and five treatments: Panicum maximum cv. Tanzania sown during the nitrogen fertilization (CTD of the corn; Panicum maximum cv. Mombaça sown during the nitrogen fertilization (CMD of the corn; Urochloa brizantha cv. Xaraés sown during the occasion of nitrogen fertilization (CBD of the corn; Urochloa ruziziensis cv. Comumsown during the nitrogen fertilization (CRD of the corn and single corn (control. The production components of corn: plant population per hectare (PlPo, number of ears per hectare (NE ha-1, number of rows per ear (NRE, number of kernels per row on the cob (NKR, number of grain in the ear (NGE and mass of 100 grains (M100G were not influenced by consortium with forage. Comparing grain yield (GY single corn and maize intercropped with forage of the genus Panicum

  8. Live performance, carcass characteristic and blood metabolite responses of broilers to two distinct corn types with different extent of grinding.

    Science.gov (United States)

    Zhao, J P; Cui, D P; Zhang, Z Y; Jiao, H C; Song, Z G; Lin, H

    2017-04-01

    The major objective of this research was to establish the main and interactive effects of corn type and extent of grinding on broiler performance including carcass characteristics. A completely randomized experimental design with a 2 (corn type) × 2 (fine and coarse) factorial arrangement, each with six replicates of 45 male Ross chicks, was applied. Experimental diets, containing dent or hard corn, were formulated with two extents of grinding (3.00 or 6.00 mm screens) for three growing phases. In comparison with dent corn, the hard corn increased body weight (BW) gain and thigh muscle yield (p grinding. Coarser grinding increased the weight of proventriculus (p < 0.01), gizzard (p < 0.05) and small + large intestine (p < 0.10) relative to BW, particularly towards market size. These results suggest that feeding hard corn or large-particle-size corn have some favourable effects on growth performance or gastrointestinal development for finishing broilers. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

  9. The effect of nitrogen rate on transgenic corn Cry3Bb1 protein expression.

    Science.gov (United States)

    Marquardt, Paul T; Krupke, Christian H; Camberato, James J; Johnson, William G

    2014-05-01

    Combining herbicide-resistant and Bacillus thuringiensis (Bt) traits in corn (Zea mays L.) hybrids may affect insect resistance management owing to volunteer corn. Some Bt toxins may be expressed at lower levels by nitrogen-deficient corn roots. Corn plants with sublethal levels of Bt expression could accelerate the evolution of Bt resistance in target insects. The present objective was to quantify the concentration of Bt (Cry3Bb1) in corn root tissue with varying tissue nitrogen concentrations. Expression of Cry3Bb1 toxin in root tissue was highly variable, but there were no differences in the overall concentration of Cry3Bb1 expressed between roots taken from Cry3Bb1-positive volunteer and hybrid corn plants. The nitrogen rate did affect Cry3Bb1 expression in the greenhouse, less nitrogen resulted in decreased Cry3Bb1 expression, yet this result was not documented in the field. A positive linear relationship of plant nitrogen status on Cry3Bb1 toxin expression was documented. Also, high variability in Cry3Bb1 expression is potentially problematic from an insect resistance management perspective. This variability could create a mosaic of toxin doses in the field, which does not fit into the high-dose refuge strategy and could alter predictions about the speed of evolution of resistance to Cry3Bb1 in western corn rootworm Diabrotica virgifera virgifera LeConte. © 2013 Society of Chemical Industry.

  10. Components of corn crop yield under inoculation with Azospirillum brasilense using integrated crop-livestock system

    Directory of Open Access Journals (Sweden)

    Marcos da Silva Brum

    2016-09-01

    Full Text Available The objective of this study was to evaluate the agronomic characteristics of corn seed inoculated with Azospirillum brasilense, grown on black oat and ryegrass straw, and managed under different grazing strategies and doses of nitrogen. The experiment was conducted in Santa Maria, Rio Grande do Sul State, Brazil, during two agricultural seasons (2012/2013 and 2013/2014 in a randomized, complete block design with three replications. In the winter period, black oat and ryegrass straw were managed at different grazing heights by sheep (0.30, 0.20, 0.10 m, conventional grazing, and no grazing with three doses of nitrogen (0, 50, and 100 kg ha-1, with or without inoculation by A. brasilense. We used the hybrid Pioneer (P1630H® in 2012 and the hybrid Agroeste (AS 1551® in 2013. The height of corn plants was greater when they were grown on black oat and ryegrass straw, and the absence of grazing favored productivity. Under drought conditions, the application of nitrogen to the pasture favored corn development, increasing plant height, ear height, and stem diameter. Inoculation with A. brasilense had a positive effect on the characteristics of yield and productivity of corn, independent of growing season and hybrid used.

  11. Composição química, vitreosidade e digestibilidade de diferentes híbridos de milho para suínos Chemical composition, vitreousity endosperm and digestibility of different hybrids of corn for growing pigs

    Directory of Open Access Journals (Sweden)

    Vinícius de Souza Cantarelli

    2007-06-01

    Full Text Available Objetivou-se avaliar a composição química, vitreosidade e valores nutricionais de diferentes híbridos de milho através de análises laboratoriais e de um ensaio de metabolismo com suínos em crescimento. Foram utilizados 24 suínos em fase de crescimento (35,6 Kg ±± 3,05 kg de PV machos castrados mestiços (LD x LW, os quais foram mantidos em gaiolas de metabolismo e distribuídos em um delineamento inteiramente ao acaso totalizando 24 parcelas. Os tratamentos experimentais consistiram de 6 rações com os seguintes híbridos de milho: milho óleo (Móleo, milho QPM (MQPM, milho dentado (Mdent, milho semidentado (Msemi e dois milhos duros (Mdur1 e (Mdur2. Os valores obtidos de vitreosidade, coeficiente de digestibilidade da proteína bruta (CDPB e energia digestível (ED para Móleo, MQPM, Mdent, Msemi, Mdur1 e Mdur2 foram 78,5%; 71,7%; 57,2%; 68,2%; 75,9%; 82,8%; 81,68%; 80,14%; 82,35%; 69,71%; 76,98%; 75,61%; 3680; 3426; 3597; 3441; 3340 e 3469 Kcal/Kg, respectivamente. Foram observadas diferenças significativas (PThis study was conducted in order to evaluate the chemical composition, vitreousity endosperm and nutritional values of different hybrids of corn through of chemical analysis and a metabolism assay with growing pigs. The metabolism assay were conducted by utilizing 24 crossbred (LD x.LW barrows with 35,6Kg+- 3,05Kg keept in metabolism cages . The experimental treatments were formed by six (6 diets formulated with hybrids of corn: "corn oil", corn QPM, corn-dent, semi-dent, and two corns-flints. The values obtained Vitreousity, Digestibility Coefficients of the Crude Protein, and Energy Digestible for corns high oil, QPM, dent, semi-dent, hard 1 and hard 2 were 78,5%; 71,7%; 57,2%; 68,2%; 75,9%; 82,8%; 80,14%; 82,35%; 69,71%; 76,98%; 75,61%; 3680, 3426; 3597; 3441; 3340 and 3469 Kcal/Kg, respectively. The data shown significant differences (P<0,005 for the values of vitreousity (P<0,005 among the corns studied. Corns varieties

  12. Corn defense responses to nitrogen availability and subsequent performance and feeding preferences of beet armyworm (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Ren, Li-Li; Hardy, Giles; Liu, Zhu-Dong; Wei, Wei; Dai, Hua-Guo

    2013-06-01

    Many studies have reported the effect of nitrogen (N) fertilization on plant constitutive defense responses; however, little is known about their effects on plant induced defense patterns and its consequence for insect herbivores. In our experiments, the effects of N availability on growth, nutritional quality (N content, protein/carbohydrate [P:C] ratio, modified gross energy [MGE]), and constitutive phenolics of corn, Zea mays L. were quantified. Moreover, the indirect effects of N fertilization on the beet armyworm, Spodoptera exigua Hübner through larval performance and feeding preference were examined. N fertilization increased plant growth, and depressed defense traits by increasing N content and the P:C ratio, as well as decreasing the constitutive concentration of phenolics. Subsequently, beet armyworm showed higher performance and preferentially fed on high-N corn because of its low defense traits. After beet armyworm feeding, high-N corn significantly deterred larval feeding, and had negative effects on the performance of beet armyworm through decreasing P:C ratio and increasing induced phenolics. On the contrary, there were no significant changes in P:C ratio and phenolics in low-N corn after feeding damage. Larval performance and preference were also not affected by induced compounds in low-N corn, which suggested that the expression of induced defense was dependent on N availability. The result indicates that N availability can exert a variety of bottom-up effect on plant defense patterns to influence insect population dynamics, and thereby may represent a source of variation in plant-insect interactions.

  13. Feed intake, growth performance and digestibility in goats fed whole corn plant silage and Napier grass

    Directory of Open Access Journals (Sweden)

    Khaing, K.T.

    2015-06-01

    Full Text Available Shortage and inconsistent quality of forage in developing countries are the major constraints to the development of ruminant sector. To overcome these problems, feeding of ruminants with conserved forages is an important feeding strategy to ensure the success of ruminant production in the third world countries. The use of whole corn plant as silage has drawn many attention due to high protein efficiency, relatively high digestible energy and total digestible nutrients. Thus, the objective of this study was to determine feed intake, growth performance and nutrients digestibility in goats fed different inclusion level of whole corn plant silage to Napier grass based diets. Fifteen male Boer cross goats around six months old and approximately 18.54 ? 1.83 kg of body weight were used as experimental animals. The goats were assigned into five treatment groups consisted of different proportions of Napier grass (G and whole plant corn silage (CS ?T1:100/0 G/CS; T2:75/25 G/CS; T3:50/50 G/CS; T4:25/75 G/CS and T5:0/100 G/CS. The increase of corn silage to Napier grass proportion demonstrates increase in dry matter intake and growth performance in the goats. The highest nutrient digestibility was observed in T5:0/100 G/CS and T3:50/50 G/CS. It can be concluded that high proportion of corn silage to grass diets had resulted in increases in feed intake and growth performance of goats. Feeding the animals with T5 and T3 resulted in high nutrient utilization compared to other treatments. However, the highest growth performance was observed in animals that were fed with T5 diets.

  14. Magnetite Dissolution Performance of HYBRID-II Decontamination Process

    International Nuclear Information System (INIS)

    Kim, Seonbyeong; Lee, Woosung; Won, Huijun; Moon, Jeikwon; Choi, Wangkyu

    2014-01-01

    In this study, we conducted the magnetite dissolution performance test of HYBRID-II (Hydrazine Based Reductive metal Ion Decontamination with sulfuric acid) as a part of decontamination process development. Decontamination performance of HYBRID process was successfully tested with the results of the acceptable decontamination factor (DF) in the previous study. While following-up studies such as the decomposition of the post-decontamination HYBRID solution and corrosion compatibility on the substrate metals of the target reactor coolant system have been continued, we also seek for an alternate version of HYBRID process suitable especially for decommissioning. Inspired by the relationship between the radius of reacting ion and the reactivity, we replaced the nitrate ion in HYBRID with bigger sulfate ion to accommodate the dissolution reaction and named HYBRID-II process. As a preliminary step for the decontamination performance, we tested the magnetite dissolution performance of developing HYBRID-II process and compared the results with those of HYBRID process. HYBRID process developed previously is known have the acceptable decontamination performance, but the relatively larger volume of secondary waste induced by anion exchange resin to treat nitrate ion is the one of the problems related in the development of HYBRID process to be applicable. Therefore we alternatively devised HYBRID-II process using sulfuric acid and tested its dissolution of magnetite in numerous conditions. From the results shown in this study, we can conclude that HYBRID-II process improves the decontamination performance and potentially reduces the volume of secondary waste. Rigorous tests with metal oxide coupons obtained from reactor coolant system will be followed to prove the robustness of HYBRID-II process in the future

  15. Initial performance of corn in response to treatment of seeds with humic acids isolated from bokashi

    Directory of Open Access Journals (Sweden)

    Marihus Altoé Baldotto

    2016-02-01

    Full Text Available ABSTRACT The humified organic matter presents bioactivity similar to the auxinic effect. As bokashi is produced by a special process of humification, information is needed about the bioactive potential of its humic acids. The objective of this work was studying the initial performance of corn-indicator plants in response to the application of different concentrations of humic acids isolated from bokashi. The corn seeds were treated for 16 hours with solutions containing 0, 10, 20, 30, 40 and 80 mmol L-1 of C in the form of humic acids. Then, the seeds were planted in pots of 1 dm3 containing corrected and fertilized soil, in greenhouse. Growth characteristics of shoot and root systems were evaluated. The results showed that the humic acids extracted from bokashi had positive effects on the initial performance of corn.

  16. Effect of corn inclusion on soybean hull-based diet digestibility and growth performance in continuous culture fermenters and beef cattle.

    Science.gov (United States)

    Russell, J R; Sexten, W J; Kerley, M S

    2016-07-01

    Two experiments were conducted using soybean hull (SH) diets with increasing corn proportions to determine increasing corn inclusion effects on fermentation characteristics, diet digestibility, and feedlot performance. The hypothesis was that fiber digestibility would quadratically respond to starch proportion in the diet with a break point where starch inclusion improved fiber digestion and feedlot performance. Proportionately, the diets contained 100:0 (SH100), 90:10 (SH90), 80:20 (SH80), 60:40 (SH60), or 20:80 SH:corn (SH20). In Exp. 1, diets were randomly distributed over 24 continuous culture fermenters and fed for 7 d. In Exp. 2, forty steers (347 ± 29 kg BW) and 50 heifers (374 ± 24 kg BW) were blocked by gender, stratified by BW, and distributed across diets. Cattle were fed for 70 d with titanium dioxide included in the diet for the final 14 d and fecal samples collected to measure digestibility. Individual DMI was measured using GrowSafe Feed Intake system. Data were analyzed using the MIXED procedure of SAS with diet evaluated as the fixed effect. In Exp. 1, NDF digestibility (NDFd) linearly decreased ( = 0.04) and ADF digestibility (ADFd) tended to linearly decrease ( = 0.09) as corn increased. Dry matter digestibility (DMd) was cubic ( = 0.01) and OM digestibility (OMd) was quadratic ( = 0.03), and among the 4 SH-based diets, DMd and OMd were greatest for SH90. Acetate:propionate ratio and pH were quadratic ( digestibility decreased as corn inclusion increased. However, based on continuous culture digestibility and VFA values as well as feedlot digestibility and performance, optimal corn inclusion for growth and diet utilization in the 4 SH-based diets fell between SH80 and SH90, or 0.4 and 0.2% BW corn supplementation. In this study, providing 0.4% BW corn supplementation in fiber-based diets (SH80) provided greater improvement in performance compared with 0.2% BW corn supplementation (SH90).

  17. Variation of biometric parameters in corn cobs under the influence of nitrogen fertilization

    Science.gov (United States)

    Gigel, Prisecaru; Florin, Sala

    2017-07-01

    Biometric parameters as elements of productivity on corn cobs, along with plant density per unit area (ha) are essential in achieving production. The influence of differentiated fertilization with nitrogen was evaluated at the level of productivity elements on corn cobs, Andreea hybrid. Biometric parameters of the corn cobs (total length - L; usable length - l; uncoated length with corn kernels - lu; diameter at the base - Db, middle - Dm, and top of the corn cobs - Dt; corn cob weight - Cw, grain weight - Gw) were directly influenced by the doses of nitrogen. Regression analysis has facilitated the prediction of grain weight as the main element of productivity under different statistical certainty based on nitrogen doses (R2 = 0.962, p<0.01), on the total length of corn cobs (R2 = 0.985, p<0.01), on the usable length of corn cobs (R2 = 0.996, p<<0.001), on the diameter at the base of corn cobs (R2 = 0.824, p<0.01), on the diameter at the middle of corn cobs (R2 = 0.807, p<0.01), on uncoated length with corn kernels (R2 = 0.624, p<0.01) and on the diameter at the top of the corn cobs (R2 = 0.384, p=0.015).

  18. Health Impacts from Corn Production Pre-and Post-NAFTA Trade Agreement (1986–2013)

    Science.gov (United States)

    Mendoza-Cano, Oliver; Sánchez-Piña, Ramón Alberto; González-Ibarra, Álvaro Jesús; Murillo-Zamora, Efrén; Nava-Garibaldi, Cynthia Monique

    2016-01-01

    Life cycle assessment (LCA) is a powerful methodology for the study of health impacts and public policies. We performed this study to quantitatively explain the potential health impacts on disability-adjusted life years (DALYs) of corn produced in Mexico and imported from the United States of America (U.S.) from 1984 until 2014. The processes are hybrid and organic corn production. The functional unit was defined as 1 ton of corn production. Results indicate a total value of 178,431, 244,175, and 283,426 DALYs of three decades: 1984–1993, 1994–2003, and 2004–2013, of Mexican production; the U.S. production and transport were also calculated, showing values of 29,815, 65,837, and 107,729 for the same three decades. Additionally, DALYs were obtained for the category of human health and climate change by functional unit: 802.31 (1984–1993), 802.67 (1994–2003), and 803.92 (2004–2013), and for imported corn transported to Mexico from the U.S., 859.12 (1984–2013). DALYs on human toxicity were obtained: 99.05 (1984–1993), 99.05 (1994–2003), and 99.04 (2004–2013), and for the corn imported and transported to Mexico from the U.S., 116.25 (1984–2013). Conclusions: Environmental and health impacts in terms of DALYs are higher when corn is imported versus the corn produced in Mexico. Environmental health and nominal corn cultivation and transport impacts have increased as a result of the North American Free Trade Agreement (NAFTA). Mexico needs to redefine its public policies to suffer less of an environmental burden from corn to ensure global environmental health and food security. PMID:27420088

  19. Milk line as an indicator of the harvesting time of three hybrid seeds of corn (Zea mays L.

    Directory of Open Access Journals (Sweden)

    Célio Trzeciak dos Santos

    2005-03-01

    Full Text Available The experiment was carried out to evaluate the time for harvesting seeds of three hybrids of corn (Zea mays L. at their best physiological quality and the use of the milk line as an indicator of the physiological seed maturity. Single hybrids CD 1723 and CD 5501 and double hybrid OC 705 seeds were collected for 59 days, every four days, starting 23 days after female flowering. Seed dry weight, moisture content, germination, vigour (cold and accelerated aging tests, black layer formation and seed milk line development were analysed. The harvesting time started 47 days after female flowering with high physiological quality of the seeds identified by a joint analysis of those seven characteristics of them. The milk line at stage 4 proved to be the best indicator of the time to harvest corn seeds for maximum physiological quality, because different stages of milk line development in corn seeds could be easily identified in the filed without any special equipment.O experimento foi conduzido durante o ano agrícola de 1996/97 em área experimental da Cooperativa de Desenvolvimento Econômico e Tecnológico (Coodetec, em Cascavel, Paraná, com o objetivo de avaliar o efeito da época de colheita de três híbridos de milho (Zea mays L. na qualidade fisiológica das sementes e o uso da linha de solidificação do endosperma como indicativo da maturidade fisiológica das sementes. O plantio foi realizado em 30 de setembro de 1996. Amostras de sementes dos híbridos simples CD 1723 e CD 5501, bem como do híbrido duplo OC 705, foram colhidas em intervalos de quatro dias, durante 59 dias, iniciando-se a colheita no vigésimo terceiro dia após o florescimento feminino. As características avaliadas nas sementes foram o acúmulo de matéria seca, o conteúdo de umidade, a germinação, o vigor (pelos testes de frio e de envelhecimento acelerado, a formação da camada preta e o desenvolvimento da linha de solidificação do endosperma. A colheita dos tr

  20. Genomic Prediction of Barley Hybrid Performance

    Directory of Open Access Journals (Sweden)

    Norman Philipp

    2016-07-01

    Full Text Available Hybrid breeding in barley ( L. offers great opportunities to accelerate the rate of genetic improvement and to boost yield stability. A crucial requirement consists of the efficient selection of superior hybrid combinations. We used comprehensive phenotypic and genomic data from a commercial breeding program with the goal of examining the potential to predict the hybrid performances. The phenotypic data were comprised of replicated grain yield trials for 385 two-way and 408 three-way hybrids evaluated in up to 47 environments. The parental lines were genotyped using a 3k single nucleotide polymorphism (SNP array based on an Illumina Infinium assay. We implemented ridge regression best linear unbiased prediction modeling for additive and dominance effects and evaluated the prediction ability using five-fold cross validations. The prediction ability of hybrid performances based on general combining ability (GCA effects was moderate, amounting to 0.56 and 0.48 for two- and three-way hybrids, respectively. The potential of GCA-based hybrid prediction requires that both parental components have been evaluated in a hybrid background. This is not necessary for genomic prediction for which we also observed moderate cross-validated prediction abilities of 0.51 and 0.58 for two- and three-way hybrids, respectively. This exemplifies the potential of genomic prediction in hybrid barley. Interestingly, prediction ability using the two-way hybrids as training population and the three-way hybrids as test population or vice versa was low, presumably, because of the different genetic makeup of the parental source populations. Consequently, further research is needed to optimize genomic prediction approaches combining different source populations in barley.

  1. Nitrogen Rate Effects on Cry3Bb1 and Cry3Bb1 + Cry34/35Ab1 Expression in Transgenic Corn Roots, Resulting Root Injury, and Corn Rootworm Beetle Emergence.

    Science.gov (United States)

    Leaf, T M; Ostlie, K R

    2017-06-01

    Nitrogen (N) application rates have been recommended historically for maximum economic yield of corn (Zea mays L.), but not for optimal expression or impacts of Bt (Bacillus thuringiensis Berliner) Cry protein(s) on target insects. This study explored the need to adjust N rates to optimize expression of corn rootworm-active Bt (Bt-RW) protein(s) in a single and a pyramided trait hybrid and resulting impacts on beetle emergence and root injury, under field conditions. The experiment featured a factorial treatment arrangement in a split-plot randomized complete block design with six N rates as the main plots and three hybrids (MON88017 expressing Cry3Bb1, MON88017 x DAS-59122 expressing Cry3Bb1 + Cry34/35Ab1, and a non-Bt-RW hybrid) as the subplots. Corn roots were sampled at the beginning of, and after, peak larval feeding to determine Bt-expression levels using an enzyme-linked immunosorbent assay. Beetles were collected every 2-3 d during emergence using cut-plant emergence cages. Cry3Bb1 expression was significantly reduced when little or no N was applied. Cry34Ab1 and Cry35Ab1 expression was highly variable and unaffected by N rate. Beetle emergence increased with N rate in the non-Bt-RW hybrid while root injury declined. Provided Bt-RW hybrids had sufficient applied N, root injury was relatively low. Results indicate that N management could affect Bt-RW expression and success of insect resistance management plans provided N is applied at rates that enhance production of susceptible beetles emerging from the non-Bt-RW (refuge) hybrid, and achieve optimal expression and efficacy of Bt traits. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  2. Desempenho de híbridos de milho na Região Sudoeste do Paraná sob diferentes espaçamentos entre linhas Performance of corn hybrids at the Southwest of Paraná under different row spacing

    Directory of Open Access Journals (Sweden)

    Alcir José Modolo

    2010-09-01

    Full Text Available A manipulação do arranjo de plantas de milho, através de alterações na densidade de plantas, de espaçamento entre linhas, de distribuição de plantas na linha e na variabilidade entre plantas, é uma das práticas de manejo mais importantes para maximizar a interceptação da radiação solar, otimizar o seu uso e potencializar o rendimento de grãos. Dessa forma, objetivou-se com este trabalho estudar os efeitos da combinação entre diferentes híbridos de milho e espaçamentos entre linhas no desenvolvimento da cultura em sistema de plantio direto na Região Sudoeste do Paraná. O experimento foi realizado na Área Experimental do Curso de Agronomia da UTFPR, no município de Pato Branco - Pr, com delineamento estatístico aleatorizado em blocos em esquema fatorial (3 x 3, com quatro repetições. Os tratamentos foram compostos pela combinação entre três híbridos (DKB 240, PIONEER 30R50 e SG 6010 e três espaçamentos entre linhas (0,45; 0,70 e 0,90 m. Após a semeadura, foram avaliados: a altura de plantas, o diâmetro do colmo, o rendimento de grãos e seus componentes. Os resultados mostraram que em nenhuma das avaliações houve interações entre híbridos e espaçamentos e que a redução no espaçamento entre linhas promoveu aumento no número de espigas por planta e o incremento na produtividade de grãos na cultura do milho.Corn plant arrangement is one of the most important management tool to improve solar radiation interception and it can be done through changes in plant density, row spacing, distribution of plants in the row and plant variability aiming to optimize its use and maximize the yield. Due to it, the objective of this work was to study the effects of different corn hybrids and row spacing over the corn development cultivated in a no-tillage system in the Southwest of Paraná. The experiment was carried out at the experimental area of the UTFPR Agronomy Course located in Pato Branco - Pr, following a complete

  3. Productive performance and blood parameters of bulls fed diets containing babassu mesocarp bran and whole or ground corn

    Directory of Open Access Journals (Sweden)

    Aline Evangelista Machado Santana

    2015-01-01

    Full Text Available The objective of the present study was to evaluate the effects of corn milling and the inclusion of babassu mesocarp bran (BMB on productive performance, digestibility of dietary nutrients, and blood parameters of dairy crossbred (Holstein-Gyr bulls finished in confinement. Twenty-four bulls were fed four different experimental diets, containing two levels of inclusion of BMB (0 and 41.24% and corn supplied in two different forms (ground and whole, for 98 days (77 days of data collection and 21 days of adaptation. The intakes and digestibility coefficients of the dry matter (DM and nutrients were determined. There were no significant interaction effects of the BMB inclusion level and the form of corn used on the performance and digestibility variables. The intakes of DM, crude protein (CP, and neutral detergent fibre (NDF increased with the inclusion of BMB in the diets. However, the inclusion of BMB in the diets decreased the ether extract intake, the NDF apparent digestibility, and the feed efficiency of DM and CP. Dry matter and NDF intakes also increased with the use of ground corn in the diet, which promoted an increase in the intake of total digestible nutrients (TDN, digestibility of non-fibrous carbohydrates, and average daily gain. However, the supply of ground corn reduced the feed efficiency of TDN. The remaining measured variables did not vary with the tested diets. The levels of plasma protein and albumin remained normal, but glucose concentrations were always high, irrespective of the tested diet. The form of corn supplied and the level of BMB inclusion had a significant interaction effect on the levels of triglycerides, urea, aspartate aminotransferase, and alkaline phosphatase. Babassu mesocarp bran can be included up to 41.24% in the diet of confined bulls without a negative effect on the animal weight gain. Corn should be supplied ground because this form improves the performance of crossbred bulls

  4. Molecular confirmation of Maize rayado fino virus as the Brazilian corn streak virus

    OpenAIRE

    Hammond,Rosemarie Wahnbaeck; Bedendo,Ivan Paulo

    2005-01-01

    Maize rayado fino virus (MRFV), present in various countries in Latin America, has shown similarities to corn streak virus that occurs in Brazil, regarding pathogenic, serological and histological characteristics. In the current report both virus were molecularly compared to confirm the similarities between them. MRFV was identified by nucleic acid hybridization in samples of maize tissues exhibiting symptoms of "corn stunt" disease, collected from two Brazilian States - São Paulo and Minas G...

  5. Effects of cutting height and maturity on the nutritive value of corn silage for lactating cows.

    Science.gov (United States)

    Neylon, J M; Kung, L

    2003-06-01

    We studied the effect of increasing the cutting height of whole-plant corn at the time of harvest from 12.7 (NC) to 45.7 (HC) cm on yield and nutritive value of silage for dairy cows. Three leafy corn silage hybrids were harvested at NC and HC at about 34% dry matter (E) and 41% DM (L) and ensiled in laboratory silos. Increasing the height of cutting lowered yields of harvested DM/ha. In addition, the concentrations of DM and starch were higher but the concentrations of lactic acid, crude protein, neutral detergent fiber (NDF), and acid detergent fiber were lower in HC than in NC. The concentration of acid detergent lignin was also lower in HC, but only in corn harvested at E. In vitro digestion (30 h) of NDF was greater in HC (50.7%) than NC (48.3%). Calculated yield of milk per tonne of forage DM was greater for HC than for NC at E but not at L. In a lactation experiment, increasing the height of cutting of another leafy corn silage hybrid, TMF29400, in general also resulted in similar changes in nutrient composition as just described. When fed to lactating dairy cows, HC corn silage resulted in tendencies for greater NDF digestion in the total tract, higher milk production and improved feed efficiency, but there were no differences in 3.5% fat corrected milk between treatments. Results of this study suggest that increasing the cutting height of whole plant corn at harvest can improve the nutritive value of corn silage for lactating dairy cows.

  6. Effects of hybrid and maturity stage on in vitro rumen digestibility of immature corn grain

    Directory of Open Access Journals (Sweden)

    Sadek Ahmed

    2014-07-01

    Full Text Available This study aimed to evaluate the influences of hybrids (HYB and maturity stage (SAMP on in vitro rumen digestibility of immature corn grain. Four HYB (Gigantic, Y43, Klips and 9575 from the FAO group 700 were grown under identical agronomic conditions. First sampling (T1 was done after 95 days from seedling and then 4, 8, 13, 18 and 27 days later (T2 to T6. In vitro starch digestibility (STD_7h and gas production (72 h were measured. Whole plant and grain dry matter (WP_DM and GR_DM, respectively and zein content were significantly affected (P<0.01 by HYB and SAMP. Starch content was significantly affected by HYB, SAMP and their interaction. It increased from T1 to T4 (from 67.47 to 72.82% of GR_DM and then tended to plateau. Concurrently, STD_7h significantly decreased with advancing SAMP and was also affected by HYB. With advancing maturity, total volatile fatty acids (VFA significantly decreased, with an increase of acetate and a decrease of propionate molar proportion (P<0.01. Gas production rate (GP_c was significantly affected by HYB, SAMP and HYB×SAMP. Whole plant grain DM correlated (P<0.01 positively with grain starch content (r=0.60 and 0.64 but negatively with STD_7h (r=-0.39 and r=-0.63 and VFA concentration (r=-0.59 and -0.75. Zein percentage in crude protein negatively affected (P<0.01 total DM (r=-0.65,, STD_7h (r=-0.73 and GP_c (r=- 0.68. Results suggest that genotypes and maturity stages influence DM and rumen starch digestibility of immature corn grain and in this respect zein can play a significant role.

  7. Pulsed electromagnetic field: an organic compatible method to promote plant growth and yield in two corn types.

    Science.gov (United States)

    Bilalis, Dimitrios J; Katsenios, Nikolaos; Efthimiadou, Aspasia; Karkanis, Anestis

    2012-12-01

    Pre-sowing treatment of pulsed electromagnetic fields was used in corn seeds, in both indoor and outdoor conditions, in order to investigate the effect on plant growth and yield. The results of this research showed that pulsed electromagnetic fields can enhance plant characteristics, both under controlled environmental conditions and uncontrolled field conditions. The two varieties responded differently in the duration of magnetic field. Seeds were treated for 0, 15, 30, and 45 min with pulsed electromagnetic field (MF-0, MF-15, MF-30, and MF-45). Common corn variety performed better results in MF-30 treatment, while sweet corn variety performed better in MF-45 treatment. Magnetic field improved germination percentage, vigor, chlorophyll content, leaf area, plant fresh and dry weight, and finally yields. In the very interesting measurement of yield, seeds that have been exposed to magnetic field for 30 and 45 min have been found to perform the best results with no statistical differences among them. Another interesting finding was in root dry weight measurements, where magnetic field has a negative impact in MF-30 treatment in both hybrids, however without affecting other measurements. Enhancements on plant characteristics with economic impact on producer's income could be the future of a modern, organic, and sustainable agriculture.

  8. Personal Rotorcraft Design and Performance with Electric Hybridization

    Science.gov (United States)

    Snyder, Christopher A.

    2017-01-01

    Recent and projected improvements for more or all-electric aviation propulsion systems can enable greater personal mobility, while also reducing environmental impact (noise and emissions). However, all-electric energy storage capability is significantly less than present, hydrocarbon-fueled systems. A system study was performed exploring design and performance assuming hybrid propulsion ranging from traditional hydrocarbon-fueled cycles (gasoline Otto and diesel) to all-electric systems using electric motors generators, with batteries for energy storage and load leveling. Study vehicles were a conventional, single-main rotor (SMR) helicopter and an advanced vertical takeoff and landing (VTOL) aircraft. Vehicle capability was limited to two or three people (including pilot or crew); the design range for the VTOL aircraft was set to 150 miles (about one hour total flight). Search and rescue (SAR), loiter, and cruise-dominated missions were chosen to illustrate each vehicle and degree of hybrid propulsion strengths and weaknesses. The traditional, SMR helicopter is a hover-optimized design; electric hybridization was performed assuming a parallel hybrid approach by varying degree of hybridization. Many of the helicopter hybrid propulsion combinations have some mission capabilities that might be effective for short range or on-demand mobility missions. However, even for 30 year technology electrical components, all hybrid propulsion systems studied result in less available fuel, lower maximum range, and reduced hover and loiter duration than the baseline vehicle. Results for the VTOL aircraft were more encouraging. Series hybrid combinations reflective of near-term systems could improve range and loiter duration by 30. Advanced, higher performing series hybrid combinations could double or almost triple the VTOL aircrafts range and loiter duration. Additional details on the study assumptions and work performed are given, as well as suggestions for future study effort.

  9. Genetic diversity assessed by microsatellite markers in sweet corn cultivars

    Directory of Open Access Journals (Sweden)

    Ana Daniela Lopes

    2015-12-01

    Full Text Available Information on genetic diversity is essential to the characterization and utilization of germplasm. The genetic diversity of twenty-two sweet corn cultivars (seventeen open-pollinated varieties, OPV, and five hybrids, H was investigated by applying simple sequence repeat markers. A total of 257 primers were tested, of which 160 were found to be usable in terms of high reproducibility for all the samples tested; 45 were polymorphic loci, of which 30 were used to assess the genetic diversity of sweet corn cultivars. We detected a total of 86 alleles using 30 microsatellite primers. The mean polymorphism was 82 %. The highest heterozygosity values (Ho = 0.20 were found in the PR030-Doce Flor da Serra and BR427 III OPVs, whereas the lowest values (0.14 were recorded in the MG161-Branco Doce and Doce Cubano OPVs. The polymorphism information content ranged from 0.19 (Umc2319 to 0.71 (Umc2205. The analysis of molecular variance revealed that most of the genetic variability was concentrated within the cultivars of sweet corn (75 %, with less variability between them (25 %. The consensus tree derived from the neighbor-joining (NJ algorithm using 1,000 bootstrapping replicates revealed seven genetically different groups. Nei’s diversity values varied between 0.103 (Doce do Hawai × CNPH-1 cultivars and 0.645 (Amarelo Doce × Lili cultivars, indicating a narrow genetic basis. The Lili hybrid was the most distant cultivar, as revealed by Principal Coordinates Analysis and the NJ tree. This study on genetic diversity will be useful for planning future studies on sweet corn genetic resources and can complement the breeding programs for this crop.

  10. Yield performance and stability of CMS-based triticale hybrids.

    Science.gov (United States)

    Mühleisen, Jonathan; Piepho, Hans-Peter; Maurer, Hans Peter; Reif, Jochen Christoph

    2015-02-01

    CMS-based triticale hybrids showed only marginal midparent heterosis for grain yield and lower dynamic yield stability compared to inbred lines. Hybrids of triticale (×Triticosecale Wittmack) are expected to possess outstanding yield performance and increased dynamic yield stability. The objectives of the present study were to (1) examine the optimum choice of the biometrical model to compare yield stability of hybrids versus lines, (2) investigate whether hybrids exhibit a more pronounced grain yield performance and yield stability, and (3) study optimal strategies to predict yield stability of hybrids. Thirteen female and seven male parental lines and their 91 factorial hybrids as well as 30 commercial lines were evaluated for grain yield in up to 20 environments. Hybrids were produced using a cytoplasmic male sterility (CMS)-inducing cytoplasm that originated from Triticumtimopheevii Zhuk. We found that the choice of the biometrical model can cause contrasting results and concluded that a group-by-environment interaction term should be added to the model when estimating stability variance of hybrids and lines. midparent heterosis for grain yield was on average 3 % with a range from -15.0 to 11.5 %. No hybrid outperformed the best inbred line. Hybrids had, on average, lower dynamic yield stability compared to the inbred lines. Grain yield performance of hybrids could be predicted based on midparent values and general combining ability (GCA)-predicted values. In contrast, stability variance of hybrids could be predicted only based on GCA-predicted values. We speculated that negative effects of the used CMS cytoplasm might be the reason for the low performance and yield stability of the hybrids. For this purpose a detailed study on the reasons for the drawback of the currently existing CMS system in triticale is urgently required comprising also the search of potentially alternative hybridization systems.

  11. Short communication: Growth performance, nutrient digestibility and blood parameters of fattening lambs fed diet replacing corn with orange pulp

    DEFF Research Database (Denmark)

    Lashkari, Saman; Taghizadeh, Akbar; Paya, Hamid

    2017-01-01

    The objective of the present study was to evaluate the effect of replacing corn with orange pulp (OP) on growth performance, rumen fermentation, nutrient digestibility and blood parameters of fattening lambs. Twenty male lambs were placed in individual pens and fed with four levels of replacement...... fiber showed a quadratic effect with the level of replacement. The results of the present study showed that replacement of corn by OP improves DMI of fattening lambs, leading to an enhancement in ADG at the replacement level of 40.3%. Also, total replacement of corn by OP did not have any adverse effect...

  12. Effects of Feeding Corn-lablab Bean Mixture Silages on Nutrient Apparent Digestibility and Performance of Dairy Cows

    Directory of Open Access Journals (Sweden)

    Yongli Qu

    2013-04-01

    Full Text Available This study estimated the fermentation characteristics and nutrient value of corn-lablab bean mixture silages relative to corn silages. The effects of feeding corn-lablab bean mixture silages on nutrient apparent digestibility and milk production of dairy cows in northern China were also investigated. Three ruminally cannulated Holstein cows were used to determine the ruminal digestion kinetics and ruminal nutrient degradability of corn silage and corn-lablab bean mixture silages. Sixty lactating Holstein cows were randomly divided into two groups of 30 cows each. Two diets were formulated with a 59:41 forage: concentrate ratio. Corn silage and corn-lablab bean mixture silages constituted 39.3% of the forage in each diet, with Chinese wildrye hay constituting the remaining 60.7%. Corn-lablab bean mixture silages had higher lactic acid, acetic acid, dry matter (DM, crude protein (CP, ash, Ca, ether extract concentrations and ruminal nutrient degradability than monoculture corn silage (p<0.05. Neutral detergent fiber (NDF and acid detergent fiber (ADF concentrations of corn-lablab bean mixture silages were lower than those of corn silage (p<0.05. The digestibility of DM, CP, NDF, and ADF for cows fed corn-lablab bean mixture silages was higher than for those fed corn silage (p<0.05. Feeding corn-lablab bean mixture silages increased milk yield and milk protein of dairy cows when compared with feeding corn silage (p<0.05. The economic benefit for cow fed corn-lablab bean mixture silages was 8.43 yuan/day/cow higher than that for that fed corn silage. In conclusion, corn-lablab bean mixture improved the fermentation characteristics and nutrient value of silage compared with monoculture corn. In this study, feeding corn-lablab bean mixture silages increased milk yield, milk protein and nutrient apparent digestibility of dairy cows compared with corn silage in northern China.

  13. Effects of corn-based diet starch content and neutral detergent fiber source on lactation performance, digestibility, and bacterial protein flow in dairy cows.

    Science.gov (United States)

    Fredin, S M; Akins, M S; Ferraretto, L F; Shaver, R D

    2015-01-01

    An experiment was conducted to evaluate the effects of corn-based dietary starch content and source of neutral detergent fiber (NDF) on lactation performance, nutrient digestion, bacterial protein flow, and ruminal parameters in lactating dairy cows. Eight ruminally cannulated multiparous Holstein cows averaging 193±11d in milk were randomly assigned to treatments in a replicated 4×4 Latin square design with 21-d periods. Treatment diets were high corn grain (HCG; 38% corn silage, 19% dry ground corn, and 4% soy hulls), high soy hulls (HSH; 38% corn silage, 11% dry ground corn, and 13% soy hulls), high corn silage (HCS; 50% corn silage, 6% dry ground corn, and 4% soy hulls), and low corn silage (LCS; 29% corn silage, 15% corn, and 19% soy hulls). The HCG, HSH, HCS, and LCS diets contained 29, 23, 24, and 22% starch; 27, 32, 30, and 32% total NDF; and 21, 21, 25, and 17% forage NDF (dry matter basis), respectively. Mean dry matter intake and milk yield were unaffected by treatment. Cows fed LCS had reduced milk fat content compared with HSH and HCS. The concentration of milk urea nitrogen was greater for cows fed HCS compared with the other treatments. Total-tract digestion of NDF was reduced for cows fed the HCG diet. Total-tract starch digestion was increased for cows fed the HSH and HCS compared with HCG and LCS diets. Bacterial protein flow was unaffected by treatment. Ruminal ammonia concentration was reduced in cows fed the HCG and LCS diets compared with the HCS diet. Ruminal propionate increased and the acetate:propionate ratio decreased in cows fed the LCS diet compared with the HCS diet. Ruminal pH was greater for cows fed the HCS diet compared with cows fed the LCS diet. Diet digestibility and performance of mid- to late-lactation cows fed reduced-starch diets by partially replacing corn grain with soy hulls or corn silage was similar to or improved compared with cows fed a normal-starch diet. Copyright © 2015 American Dairy Science Association

  14. Reactivity limitations on the performance of hybrid reactors

    International Nuclear Information System (INIS)

    Piera, M.; Martinez-Val, J.M.

    1994-01-01

    A neutronic theory for characterizing the hybrid blanket physics is used to show that hybrid performances are limited because of reactivity restrictions. The hybrid must always remain subcritical, even in abnormal conditions. For hybrids devoted to energy production by multiplication of the neutron source power, the restriction is particularly strong, and the electricity recirculation fraction to feed the plant can be too large for its economic feasibility. In hybrids used to breed fissile fuel, the power of LWR maintained by power unit of the hybrid is also limited (to a factor of 10, approx.). (author)

  15. Protein determination in single corns

    International Nuclear Information System (INIS)

    Knorr, J.; Schiekel, M.; Franke, W.; Focke, F.

    1994-01-01

    Determination of protein content in food materials is usually done by analyzing the nitrogen amount by wet chemical Kjeldahl method. An improved accuracy accompanied by smaller analyzing intervals can be achieved using nondestructive neutron activation. Analyses have been performed using 14 MeV neutrons to determine the content of N and P in single wheat corns. Irradiation parameters have been optimized to prevent serious radiation damage in grains. About 200 single corns have been investigated with total net weights ranging from 30 to 70 mg. The tested arrangement allows determination of nitrogen amount in a single corn down to 0.3 mg with an accuracy of better than 4 %. Mean nitrogen concentrations in the range from 9 to 19% per corn have been detected. (author) 5 refs.; 6 figs

  16. Performances Study of a Hybrid Rocket Engine

    Directory of Open Access Journals (Sweden)

    Adrian-Nicolae BUTURACHE

    2018-06-01

    Full Text Available This paper presents a study which analyses the functioning and performances optimization of a hybrid rocket engine based on gaseous oxygen and polybutadiene polymer (HTPB. Calculations were performed with NASA CEA software in order to obtain the parameters resulted following the combustion process. Using these parameters, the main parameters of the hybrid rocket engine were optimized. Using the calculus previously stated, an experimental rocket engine producing 100 N of thrust was pre-dimensioned, followed by an optimization of the rocket engine as a function of several parameters. Having the geometry and the main parameters of the hybrid rocket engine combustion process, numerical simulations were performed in the CFX – ANSYS commercial software, which allowed visualizing the flow field and the jet expansion. Finally, the analytical calculus was validated through numerical simulations.

  17. Performance and economic analysis of broilers fed diets containing acerola meal in replacement of corn

    Directory of Open Access Journals (Sweden)

    Leonardo Henrique Zanetti

    2014-12-01

    Full Text Available It was aimed with this research to evaluate the performance of broiler chickens fed diets containing increasing levels of acerola meal in replacement of corn and analyze the economic viability of that production system. A total of 980 day-old male Cobb chicks were used, allotted in a completely randomized design, with four treatments - inclusion levels (0%, 5%, 10% and 15% of acerola meal in replacement of corn – and seven replications with 35 birds per experimental unit. The birds were weighed at 21 and 42 days of age to measure the performance data. In the period between 1 and 21 days of age, differences were observed in the feed intake and feed:gain only, in which the inclusion of acerola meal linearly decreased feed intake and improved feed:gain up to a level of 10.25%. For the total rearing period, the control treatment showed higher body weight. The feed:gain showed linear effect, worsening the results with increasing amounts of acerola meal in the diets. In the same period, there was no significant difference in feed intake and productive efficiency index. With regard to the economic analysis, it was found that the lowest final cost per broiler was observed in diets with 10% of acerola meal inclusion in replacement of corn.

  18. Fusing corn nitrogen recommendation tools for an improved canopy reflectance sensor performance

    Science.gov (United States)

    Nitrogen (N) rate recommendation tools are utilized to help producers maximize corn grain yield production. Many of these tools provide recommendations at field scales but often fail when corn N requirements are variable across the field. Canopy reflectance sensors are capable of capturing within-fi...

  19. Hybrids and varieties of corn inoculated with Herbaspirillum seropedicaeHíbridos e variedades de milho submetidos à inoculação de sementes com Herbaspirillum seropedicae

    Directory of Open Access Journals (Sweden)

    Fabio Fernando de Araujo

    2013-06-01

    Full Text Available The biological nitrogen fixation provided by diazotrophic bacteria may represent an alternative to maize production in more sustainable agricultural systems or low use of technology. In order to evaluate the growth, content and accumulation of nitrogen in corn genotypes, depending on seed inoculation with Herbaspirillum seropedicae experiment was conducted in greenhouse evaluating 35 corn genotypes hybrid single, double, triple and varieties. For seed inoculation was used peat inoculant containing the bacterial strain of H. seropedicae (ZAE 94. Among the commercial corn genotypes studied, only nine hybrids show increase of growth or accumulation of N with the seed inoculation with Herbaspirillum seropedicae (ZAE 94. There is a distinction in response between maize cultivars in terms of biomass production and increase of N content in the shoots.A fixação biológica de nitrogênio proporcionada por bactérias diazotróficas pode representar alternativa para a produção de milho em sistemas agrícolas mais sustentáveis ou de baixa utilização de insumos. Objetivando-se avaliar o crescimento, teor e acúmulo de nitrogênio em genótipos de milho, em função da inoculação das sementes com Herbaspirillum seropedicae, foi conduzido experimento em casa de vegetação avaliando-se 35 genótipos de milho híbridos simples, duplo, triplo e variedades. Para inoculação das sementes foi utilizado inoculante turfoso contendo a estirpe bacteriana de H. seropedicae (ZAE 94. Entre os genótipos comerciais de milho estudados, apenas nove híbridos apresentam ganhos de crescimento ou acúmulo de N com a inoculação das sementes com a estirpe Herbaspirillum seropedicae (ZAE 94. Há distinção de resposta entre cultivares de milho em termos de produção de biomassa e incremento de teor de N na parte aérea das plantas.

  20. Composição química e energia metabolizável de híbridos de milho para frangos de corte Chemical composition and metabolizable energy of corn hybrids for broilers

    Directory of Open Access Journals (Sweden)

    Rodrigo de Oliveira Vieira

    2007-08-01

    Full Text Available Determinaram-se a composição química e os valores energéticos de 45 híbridos de milho em quatro ensaios de metabolismo com pintos em crescimento. Foram utilizados 1.225 pintos machos com 19 dias de idade (350 nos ensaios 1, 2 e 3 e 175 no ensaio 4. Os ensaios 1, 2 e 3 foram compostos de 14 tratamentos, constituídos, cada um, de 13 dietas-teste com híbridos de milho e uma dieta-referência. O ensaio 4 foi composto de sete tratamentos, constituídos de seis dietas-teste e uma dieta-referência. Em todos os ensaios, os milhos substituíram 40% da dieta-referência. Adotou-se delineamento inteiramente casualizado, com cinco repetições de 5 aves/parcela. As dietas e a água foram fornecidas à vontade durante sete dias (quatro de adaptação e três de coleta total de excretas. Os valores percentuais de PB variaram em 32% (7,79% vs 11,45%, expressos na MS e os de energia bruta (EB, em 5,2%. O menor valor foi 4.425 kcal e o maior, 4.668 kcal/kg de MS. O valor médio de energia metabolizável aparente corrigida (EMAn foi de 3.744 kcal/kg e apresentou variação de 15,15% entre os híbridos testados (3.405 a 4.013 kcal/kg. Entretanto, os dois híbridos que apresentaram esta variação de 608 kcal/kg de MS na EMAn tiveram valores de EB semelhantes, diferentes em apenas 0,36% (3.914 e 3.931 kcal de EB/kg de MS, o que possivelmente resultou do coeficiente de metabolizabilidade da EB, que foi de 75% para o híbrido de menor EMAn e de 88% para o de maior EMAn. Apesar de ser um alimento energético, os valores protéicos e energéticos dos diferentes híbridos variaram consideravelmente.The values of chemical composition and metabolizable energy of 45 hybrid corns were determined in four trials with growing chickens. A total of 1,225, nineteen days old male chicks were used: 350 in the trials 1, 2 and 3 and 175 in trial 4. In the trials 1, 2 and 3 the treatments consisted of 13 test diets, being 13 corn varieties, and the reference diet in each trial

  1. Evaluation criteria for enhanced solar–coal hybrid power plant performance

    International Nuclear Information System (INIS)

    Zhao, Yawen; Hong, Hui; Jin, Hongguang

    2014-01-01

    Attention has been directed toward hybridizing solar energy with fossil power plants since the 1990s to improve reliability and efficiency. Appropriate evaluation criteria were important in the design and optimization of solar–fossil hybrid systems. Two new criteria to evaluate the improved thermodynamic performances in a solar hybrid power plant were developed in this study. Correlations determined the main factors influencing the improved thermodynamic performances. The proposed criteria can be used to effectively integrate solar–coal hybridization systems. Typical 100 MW–1000 MW coal-fired power plants hybridized with solar heat at approximately 300 °C, which was used to preheat the feed water before entering the boiler, were evaluated using the criteria. The integration principle of solar–coal hybrid systems was also determined. The proposed evaluation criteria may be simple and reasonable for solar–coal hybrid systems with multi-energy input, thus directing system performance enhancement. - Highlights: • New criteria to evaluate the solar hybrid power plant were developed. • Typical solar–coal hybrid power plants were evaluated using the criteria. • The integration principle of solar–coal hybrid systems was determined. • The benefits of the solar–coal hybrid system are enhanced at lower solar radiation

  2. Resposta de híbridos de milho irrigado à densidade de plantas em três épocas de semeadura Response of irrigated corn hybrids to plant density in three sowing dates

    Directory of Open Access Journals (Sweden)

    Paulo Regis Ferreira da Silva

    1999-04-01

    Full Text Available A determinação da densidade ótima de semeadura do milho, além de ser influenciada pelas características dos híbridos, pelo nível de fertilidade do solo e pela disponibilidade hídrica, pode também variar de acordo com a época da semeadura, uma vez que ela afeta o crescimento e desenvolvimento da planta. Com o objetivo de determinar a densidade ótima de planta em híbridos de milho com elevado potencial de rendimento de grãos, em três épocas de semeadura, com relação a rendimento de grãos, componentes do rendimento e outras características agronômicas, foram feitos quatro experimentos na região fisiográfica da Depressão Central do Rio Grande do Sul, município de Eldorado do Sul, com suplementação hídrica por aspersão. Os tratamentos constaram de quatro híbridos (Pioneer 3063, Pioneer 3207, XL 212 e Cargill 901, quatro densidades de plantas (50, 70, 90 e 110.000 pl/ha e de três épocas de semeadura (agosto, outubro e dezembro. Não há resposta à densidade de plantas dos híbridos de milho testados nas épocas de semeadura de agosto e dezembro. O aumento na densidade de plantas somente foi vantajosa na semeadura de outubro, quando se obtiveram maiores rendimentos de grãos na densidade de 70.000 pl/ha, independentemente do híbrido avaliado, nas duas estações de crescimento.Plant density response of corn besides influenced by hybrids traits, soil fertility level and water availability, could also vary with sowing date, since it affects plant growth and development. With the objective of determining the most adequate plant density of corn hybrids with high potential grain yields, in three sowing dates, in relation to grain yields, yield components and other agronomic traits, four experiments were conducted in the state of Rio Grande do Sul, Brazil, with complementary irrigation. The treatments were composed by four hybrids (Pioneer 3063, Pioneer 3207, XL 212 and Cargill 901, four plant densities (50, 70, 90 and 110

  3. Performance and ultrasound measurements of beef cattle fed diets based on whole corn or oats grains

    Directory of Open Access Journals (Sweden)

    Hugo M Arelovich

    2013-09-01

    Full Text Available This study intended to contrast dietary effects of whole grain oats versus corn included in rations with moderate roughage content on animal performance, beef ultrasound measurements, rumen and blood parameters. Ten Aberdeen Angus steers (203 kg in individual pens were fed twice daily on either whole oats (OD or corn (CD based diets. Measurements were: DM intake (DMI, average daily gain (ADG, feed to gain ratio (F/G; back fat (BF and rib eye area (RA; blood parameters. Four cannulated steers were used to study rumen pH, NH3-N and grain degradability. Rations dietary components were 55% grain, 30.1% barley straw, and 10.6% whole soybeans. Despite calculated higher ME supply (P = 0.0887 no differences were found for DMI, ADG, or F/G. Metabolizable protein intake (19.4% was larger and degradable protein intake (43.3% smaller for CD compared with OD (P < 0.01. The growth rate (cm² d-1 for RA was 40% grater for OD, but larger BF deposition (P = 0.0787 was found for CD. Blood Mg was higher for OD (p = 0.0564, nevertheless other blood parameters remained unaffected. Rumen pH and NH3-N were not influenced by diet, variations were only observed within time periods. Rumen pH decreased linearly from 7.05 to 6.13 and 7.11 to 6.37 for OD and CD respectively (P < 0.05. Minimum NH3-N concentrations (mg dL-1 were reached 12 and 18 h after morning meal for OD (7.10 and CD (5.82 respectively. Rumen degradation was larger for oats than corn. Whole oats rather than corn fed up to 55% of total DM seems to improve protein deposition, without significant changes in animal performance, rumen environment or blood parameters.

  4. High performance hybrid magnetic structure for biotechnology applications

    Science.gov (United States)

    Humphries, David E [El Cerrito, CA; Pollard, Martin J [El Cerrito, CA; Elkin, Christopher J [San Ramon, CA

    2009-02-03

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are further improvements to aspects of the hybrid magnetic structure, including additional elements and for adapting the use of the hybrid magnetic structure for use in biotechnology and high throughput processes.

  5. Reactor performance and energy analysis of solid state anaerobic co-digestion of dairy manure with corn stover and tomato residues.

    Science.gov (United States)

    Li, Yangyang; Xu, Fuqing; Li, Yu; Lu, Jiaxin; Li, Shuyan; Shah, Ajay; Zhang, Xuehua; Zhang, Hongyu; Gong, Xiaoyan; Li, Guoxue

    2018-03-01

    Anaerobic co-digestion is commonly believed to be benefical for biogas production. However, additional of co-substrates may require additional energy inputs and thus affect the overall energy efficiency of the system. In this study, reactor performance and energy analysis of solid state anaerobic digestion (SS-AD) of tomato residues with dairy manure and corn stover were investigated. Different fractions of tomato residues (0, 20, 40, 60, 80 and 100%, based on volatile solid weight (VS)) were co-digested with dairy manure and corn stover at 15% total solids. Energy analysis based on experimental data was conducted for three scenarios: SS-AD of 100% dairy manure, SS-AD of binary mixture (60% dairy manure and 40% corn stover, VS based), and SS-AD of ternary mixture (36% dairy manure, 24% corn stover, and 40% tomato residues, VS based). For each scenario, the energy requirements for individual process components, including feedstock collection and transportation, feedstock pretreatment, biogas plant operation, digestate processing and handling, and the energy production were examined. Results showed that the addition of 20 and 40% tomato residues increased methane yield compared to that of the dairy manure and corn stover mixture, indicating that the co-digestion could balance nutrients and improve the performance of solid-state anaerobic digestion. The energy required for heating substrates had the dominant effect on the total energy consumption. The highest volatile solids (VS) reduction (57.0%), methane yield (379.1 L/kg VS feed ), and net energy production were achieved with the mixture of 24% corn stover, 36% dairy manure, and 40% tomato residues. Thus, the extra energy input for adding tomato residues for co-digestion could be compensated by the increase of methane yield. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Drought genetics have varying influence on corn water stress under differing water availability

    Science.gov (United States)

    Irrigated corn (Zea mays L.) in the Great Plains will be increasingly grown under limited irrigation management and greater water stress. Hybrids with drought genetics may decrease the impacts of water stress on yield. The objective of this experiment was to evaluate the effect of drought genetics o...

  7. Performance and Metabolism of Calves Fed Starter Feed Containing Sugarcane Molasses or Glucose Syrup as a Replacement for Corn

    Directory of Open Access Journals (Sweden)

    C. E. Oltramari

    2016-07-01

    Full Text Available The aim of this study was to evaluate the effect of replacing corn grain for sugar cane molasses (MO or glucose syrup (GS in the starter concentrate on performance and metabolism of dairy calves. Thirty-six individually housed Holstein male calves were blocked according to weight and date of birth and assigned to one of the starter feed treatments, during an 8 week study: i starter containing 65% corn with no MO or GS (0MO; ii starter containing 60% corn and 5% MO (5MO; iii starter containing 55% corn and 10% MO (10MO; and iv starter containing 60% corn and 5% GS (5GS. Animals received 4 L of milk replacer daily (20 crude protein, 16 ether extract, 12.5% solids, divided in two meals (0700 and 1700 h. Starter and water were provided ad libitum. Starter intake and fecal score were monitored daily until animals were eight weeks old. Body weight and measurements (withers height, hip width and heart girth were measured weekly before the morning feeding. From the second week of age, blood samples were collected weekly, 2 h after the morning feeding, for glucose, β-hydroxybutyrate and lactate determination. Ruminal fluid was collected at 4, 6, and 8 weeks of age using an oro-ruminal probe and a suction pump for determination of pH and short-chain fatty acids (SCFA. At the end of the eighth week, animals were harvested to evaluate development of the proximal digestive tract. The composition of the starter did not affect (p>0.05 concentrate intake, weight gain, fecal score, blood parameters, and rumen development. However, treatment 5MO showed higher (p0.05. Thus, it can be concluded that the replacement of corn by 5% or 10% sugar cane molasses or 5% GS on starter concentrate did not impact performance, however it has some positive effects on rumen fermentation which may be beneficial for calves with a developing rumen.

  8. Performance and Metabolism of Calves Fed Starter Feed Containing Sugarcane Molasses or Glucose Syrup as a Replacement for Corn.

    Science.gov (United States)

    Oltramari, C E; Nápoles, G G O; De Paula, M R; Silva, J T; Gallo, M P C; Pasetti, M H O; Bittar, C M M

    2016-07-01

    The aim of this study was to evaluate the effect of replacing corn grain for sugar cane molasses (MO) or glucose syrup (GS) in the starter concentrate on performance and metabolism of dairy calves. Thirty-six individually housed Holstein male calves were blocked according to weight and date of birth and assigned to one of the starter feed treatments, during an 8 week study: i) starter containing 65% corn with no MO or GS (0MO); ii) starter containing 60% corn and 5% MO (5MO); iii) starter containing 55% corn and 10% MO (10MO); and iv) starter containing 60% corn and 5% GS (5GS). Animals received 4 L of milk replacer daily (20 crude protein, 16 ether extract, 12.5% solids), divided in two meals (0700 and 1700 h). Starter and water were provided ad libitum. Starter intake and fecal score were monitored daily until animals were eight weeks old. Body weight and measurements (withers height, hip width and heart girth) were measured weekly before the morning feeding. From the second week of age, blood samples were collected weekly, 2 h after the morning feeding, for glucose, β-hydroxybutyrate and lactate determination. Ruminal fluid was collected at 4, 6, and 8 weeks of age using an oro-ruminal probe and a suction pump for determination of pH and short-chain fatty acids (SCFA). At the end of the eighth week, animals were harvested to evaluate development of the proximal digestive tract. The composition of the starter did not affect (p>0.05) concentrate intake, weight gain, fecal score, blood parameters, and rumen development. However, treatment 5MO showed higher (p0.05). Thus, it can be concluded that the replacement of corn by 5% or 10% sugar cane molasses or 5% GS on starter concentrate did not impact performance, however it has some positive effects on rumen fermentation which may be beneficial for calves with a developing rumen.

  9. Updates to the Corn Ethanol Pathway and Development of an Integrated Corn and Corn Stover Ethanol Pathway in the GREET™ Model

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Wang, Michael Q. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division

    2014-09-01

    Corn ethanol, a first-generation biofuel, is the predominant biofuel in the United States. In 2013, the total U.S. ethanol fuel production was 13.3 billion gallons, over 95% of which was produced from corn (RFA, 2014). The 2013 total renewable fuel mandate was 16.6 billion gallons according to the Energy Independence and Security Act (EISA) (U.S. Congress, 2007). Furthermore, until 2020, corn ethanol will make up a large portion of the renewable fuel volume mandated by Renewable Fuels Standard (RFS2). For the GREET1_2014 release, the corn ethanol pathway was subject to updates reflecting changes in corn agriculture and at corn ethanol plants. In the latter case, we especially focused on the incorporation of corn oil as a corn ethanol plant co-product. Section 2 covers these updates. In addition, GREET now includes options to integrate corn grain and corn stover ethanol production on the field and at the biorefinery. These changes are the focus of Section 3.

  10. Corn

    OpenAIRE

    Sherwood, Brianne; Hawks, Amanda

    2011-01-01

    We have so much corn right now it's coming out of our ears (great pun, right?). And it's SO incredibly cheap! This is probably because the US produces 42% of the world's corn! Most of it is used for animal feed, but other uses include exporting to other countries, human food, seed, and industrial uses such as ethanol production. Because there is so much corn available here in the U.S. You can find it in a lot more foods than you think. It's in peanut butter, snack foods, soft drinks, multivit...

  11. Evaluation of growth traits and yield of new forage corn (Zea mays L. single cross combinations

    Directory of Open Access Journals (Sweden)

    S. Khavari Khorasani

    2016-04-01

    Full Text Available In this study 18 forage corn (Zea mays L. hybrid varieties were evaluated based on RCBD with four replications in Khorasan Razavi Agricultural and Natural Resources Research Centre, Iran, on 2008-2009. Result of analysis of variance showed that there was significantly difference between hybrids in forage yield, ear weight and ear to biomass ratio. Results of hybrids mean comparison with Duncan’s multiple range test showed that SC700 was higher than other investigated hybrids in forage yield trait. But hybrid 3 with 85.31 forage yield was the best hybrid in weight of ear and ear to biomass ratio. Though the SC704 hybrid was better than others for stem dry weight, ear dry weight and leaf area but there was not any significant difference between this hybrid and hybrid 3.

  12. Effects of corn-based diet starch content and corn particle size on lactation performance, digestibility, and bacterial protein flow in dairy cows.

    Science.gov (United States)

    Fredin, S M; Ferraretto, L F; Akins, M S; Bertics, S J; Shaver, R D

    2015-01-01

    An experiment was conducted to determine the effects of dietary starch content in corn-based diets and corn particle size on lactation performance, nutrient digestibility, and bacterial protein flow in dairy cows using the omasal and reticular sampling technique. Eight ruminally cannulated lactating multiparous Holstein cows were used in a replicated 4×4 Latin square design with a 2×2 factorial arrangement of treatments. Treatments were fine (FG; mean particle size=552µm) and coarse (CG; 1,270µm) ground dry shelled corn in normal- (NS) and reduced- (RS) starch diets fed as total mixed rations. The NS and RS rations contained 27 and 18% starch (dry matter basis), respectively, and were formulated by partially replacing corn with soy hull pellets. Mean dry matter intake was unaffected by treatment (23.2kg/d). Cows fed NS diets produced 1.9kg/d more milk and 0.06kg/d more milk protein compared with cows fed RS diets. Cows fed NSFG and RSCG diets produced more fat-corrected milk than did cows fed NSCG and RSFG diets. Milk urea concentration was decreased for cows fed NS diets (12.4mg/dL) compared with RS diets (13.5mg/dL). Ruminal digestibility of neutral detergent fiber (NDF; % of NDF intake) determined by the omasal sampling technique was increased in cows fed RS diets compared with NS diets (43.4 vs. 34.9%), and total-tract digestibility of NDF (% of NDF intake) was increased in cows fed RS diets compared with those fed NS diets (50.1 vs. 43.1%). Ruminal digestibility of starch (% of starch intake) determined by the omasal sampling technique was greater in cows fed NS diets compared with those fed RS diets (85.6 vs. 81.6%). Total-tract starch digestion was increased in cows fed RS diets compared with those fed NS diets (96.9 vs. 94.6%) and in cows fed FG diets compared with those fed CG diets (98.0 vs. 93.5%). Bacterial protein flow was unaffected by treatment. The omasal and reticular sampling techniques resulted in similar treatment effects for nutrient flow

  13. Agricultural production and nutrient runoff in the Corn Belt: Assessing dynamic environmental performance

    Science.gov (United States)

    Agricultural production in the Corn Belt region of the Upper Mississippi River Basin (UMRB) remains a leading source of nitrogen runoff that contributes to the annual hypoxic 'Dead Zone' in the Gulf of Mexico. The rise of corn production, land conversion, and fertilizer use in re...

  14. Performance and efficiency of a hydraulic hybrid powertrain

    Energy Technology Data Exchange (ETDEWEB)

    Karbaschian, Mohammad Ali [Duisburg-Essen Univ. (Germany). Faculty of Engineering

    2012-11-01

    Hydraulic hybrid powertrains are considered to be a promising technology to save energy and reduce emission in specific automotive fields because of their high power density, components lifetime, and long lasting experience in industries compared to electric hybrid powertrains. Within the first part of the paper, a very brief literature survey on hydraulic hybrid vehicle systems (HHVS) and the related dynamical behaviour is given. No specific activities to improve the efficiency of these systems were detected. Related literature with respect to optimization mainly deals with the management of the system's energy flows trying to control the engine operation point and the high pressure in the system. In the second part, a small simulation study is presented. Therefore, hybrid systems are generally assumed as a Multi-Input-Multi-Output (MIMO) system. The effect of key variables (i.e. accumulator size and pressure, pump/motor displacement and efficiency, valve dynamics) on the system is discussed. The results show that the volume displacement of pump and motor, the performance of the engine, and the state of charge of the accumulator are the most important parameters to specify the efficiency and performance of the hydraulic hybrid powertrain. Additionally, a hybrid hydraulic powertrain with an adjustable state of charge accumulator is compared with one whose state of charge is constant. The result shows the improvement of braking performance and fuel savings. The goal is to optimize the parameters of the system based on the simultaneous consideration of the three (or more) variables for a given load profile with respect to given objectives. (orig.)

  15. Inhibitory effect of corn silk on skin pigmentation.

    Science.gov (United States)

    Choi, Sang Yoon; Lee, Yeonmi; Kim, Sung Soo; Ju, Hyun Min; Baek, Ji Hwoon; Park, Chul-Soo; Lee, Dong-Hyuk

    2014-03-03

    In this study, the inhibitory effect of corn silk on melanin production was evaluated. This study was performed to investigate the inhibitory effect of corn silk on melanin production in Melan-A cells by measuring melanin production and protein expression. The corn silk extract applied on Melan-A cells at a concentration of 100 ppm decreased melanin production by 37.2% without cytotoxicity. This was a better result than arbutin, a positive whitening agent, which exhibited a 26.8% melanin production inhibitory effect at the same concentration. The corn silk extract did not suppress tyrosinase activity but greatly reduced the expression of tyrosinase in Melan-A cells. In addition, corn silk extract was applied to the human face with hyperpigmentation, and skin color was measured to examine the degree of skin pigment reduction. The application of corn silk extract on faces with hyperpigmentation significantly reduced skin pigmentation without abnormal reactions. Based on the results above, corn silk has good prospects for use as a material for suppressing skin pigmentation.

  16. Inhibitory Effect of Corn Silk on Skin Pigmentation

    Directory of Open Access Journals (Sweden)

    Sang Yoon Choi

    2014-03-01

    Full Text Available In this study, the inhibitory effect of corn silk on melanin production was evaluated. This study was performed to investigate the inhibitory effect of corn silk on melanin production in Melan-A cells by measuring melanin production and protein expression. The corn silk extract applied on Melan-A cells at a concentration of 100 ppm decreased melanin production by 37.2% without cytotoxicity. This was a better result than arbutin, a positive whitening agent, which exhibited a 26.8% melanin production inhibitory effect at the same concentration. The corn silk extract did not suppress tyrosinase activity but greatly reduced the expression of tyrosinase in Melan-A cells. In addition, corn silk extract was applied to the human face with hyperpigmentation, and skin color was measured to examine the degree of skin pigment reduction. The application of corn silk extract on faces with hyperpigmentation significantly reduced skin pigmentation without abnormal reactions. Based on the results above, corn silk has good prospects for use as a material for suppressing skin pigmentation.

  17. 7 CFR 201.78 - Pollen control for hybrids.

    Science.gov (United States)

    2010-01-01

    ... line used to pollinate an A Line and to restore fertility in the resulting hybrid seed.) (b) Corn. When 5 percent or more of the seed parent plants have receptive silks, shedding tassels in the seed...

  18. Production Systems and Potential Development of Corn in West Pasaman Districts

    Directory of Open Access Journals (Sweden)

    Yulmar Jastra

    2015-09-01

    Full Text Available Maize (Zea mays L. is the second national food crop after rice and its role is increasing in line increase of population, livestock operations, and development of raw material corn processing industry. This research is a descriptive qualitative and quantitative as well as done in stages, namely: pre -study in order neighbor information gathering and general condition of farmers in the districts of West Pasaman, intensive desk study on the extent of data and the development of hybrid corn and all information obtained from pre -study activities; observation, field survey. This study aims to: identify systems of maize production in West Pasaman, identify potential areas of development and analysis of maize farming, Prepare Corn Development Action Programme in West Pasaman. Age maize farmers in West Pasaman between 40-60 years old, with old school for 9 years and the number of family members of farmers 5. The highest maize production in West Pasaman district occurred in 2009 amounted to 364 287 tonnes with 44 793 ha of harvested area and productivity of 6.99 tonnes/ha, in 2010, a decline in production to 220 761 tonnes with a productivity of 6.3 tons /ha due to a decline in harvested area into 33 757 ha. And in 2011 the production of corn production back to normal by 286 078 tons / year with 44 360 ha of harvested area and productivity of 6.50 tonnes/ha. Potential land that can be used to achieve the 142 850 ha of maize farming dominated peat and mineral soil of each area of 7,550 ha and 16,550 ha. Of corn farming can provide a gain of Rp 8,860,000,-/ha . When the period of 4 months of the corn crop corn farmer income per month is Rp 2.215.000,-

  19. Nitrogen deficiency detection using reflected shortwave radiation from irrigated corn canopies

    International Nuclear Information System (INIS)

    Blackmer, T.M.; Schepers, J.S.; Varvel, G.E.; Walter-Shea, E.A.

    1996-01-01

    Techniques that measure the N status of corn (Zea mays L.) can aid in management decisions that have economic and environmental implications. This study was conducted to identify reflected electromagnetic wavelengths most sensitive to detecting N deficiencies in a corn canopy with the possibility for use as a management tool. Reflected shortwave radiation was measured from an irrigated corn N response trial with four hybrids and five N rates at 0, 40, 80, 120, and 160 kg N ha -1 in 1992 and 0, 50, 100, 150, and 200 kg N ha -1 in 1993. A portable spectroradiometer was used to measure reflected radiation (400-1100 nm in 1992, 350-1050 nm in 1993) from corn canopies at approximately the R5 growth stage. Regression analyses revealed that reflected radiation near 550 and 710 nm was superior to reflected radiation near 450 or 650 nm for detecting N deficiencies. The ratio of light reflectance between 550 and 600 nm to light reflectance between 800 and 900 nm also provided sensitive detection of N stress. In 1993, an inexpensive photometric cell, which has peak sensitivity to light centered at 550 nm, was also used to measure reflected radiation from a corn canopy. Photometric cell readings correlated with relative grain yield (P < 0.001, r 2 = 0.74), but more research will be required to develop procedures to account for varying daylight conditions. These results provide information needed for the development of variable-rate fertilizer N application technology. (author)

  20. Susceptibility of field populations of the fall armyworm (Lepidoptera: Noctuidae) from Florida and Puerto Rico to purified Cry1F protein and corn leaf tissue containing single and pyramided Bt genes

    Science.gov (United States)

    Larval survival of Cry1F-susceptible (FL), -resistant (PR and Cry1F-RR), and -heterozygous (FL x PR and Cry1F-RS) populations of the fall armyworm, Spodoptera frugiperda (J.E. Smith) to purified Cry1F protein and corn leaf tissue of seven Bacillus thuringiensis (Bt) corn hybrids and five non-Bt corn...

  1. Corn silage hybrid type and quality of alfalfa hay affect dietary nitrogen utilization by early lactating dairy cows.

    Science.gov (United States)

    Holt, M S; Neal, K; Eun, J-S; Young, A J; Hall, J O; Nestor, K E

    2013-10-01

    This experiment was conducted to determine the effects of corn silage (CS) hybrids and quality of alfalfa hay (AH) in high-forage dairy diets on N utilization, ruminal fermentation, and lactational performance by early-lactating dairy cows. Eight multiparous Holstein cows were used in a duplicated 4 × 4 Latin square experiment with a 2 × 2 factorial arrangement of dietary treatments. The 8 cows (average days in milk = 23 ± 11.2) were surgically fitted with ruminal cannula, and the 2 squares were conducted simultaneously. Within square, cows were randomly assigned to a sequence of 4 diets: conventional CS (CCS) or brown midrib CS (BMR) was combined with fair-quality AH [FAH: 46.7% neutral detergent fiber (NDF) and 18.4% crude protein (CP)] or high-quality AH (HAH: 39.2% NDF and 20.7% CP) to form 4 treatments: CCS with FAH, CCS with HAH, BMR with FAH, and BMR with HAH. Diets were isonitrogenous across treatments, averaging 15.9% CP. Each period lasted a total of 21 d, with 14 d for treatment adaptation and 7d for data collection and sampling. Intake of DM and milk yield did not differ in response to CS hybrids or AH quality. Although feeding BMR-based diets decreased urinary N output by 24%, it did not affect fecal N output. Feeding HAH decreased urinary N output by 15% but increased fecal N output by 20%. Nitrogen efficiency [milk N (g/d)/intake N (g/d)] tended to increase for BMR treatments. Ruminal ammonia-N concentration was lower for cows fed BMR-based diets than for those fed CCS-based diets but was not affected by quality of AH. Feeding BMR-based diets or HAH decreased milk urea N concentration by 23 or 15%, respectively, compared with CCS-based diets or FAH. Total volatile fatty acid concentration increased with HAH but was not influenced by CS hybrids. Feeding BMR-based diets decreased urinary N-to-fecal N ratio (UN:FN), and it was further reduced by feeding HAH. Although cows fed the BMR-based diets tended to increase milk N-to-manure N ratio, the

  2. Inhibitory Effect of Corn Silk on Skin Pigmentation

    OpenAIRE

    Sang Yoon Choi; Yeonmi Lee; Sung Soo Kim; Hyun Min Ju; Ji Hwoon Baek; Chul-Soo Park; Dong-Hyuk Lee

    2014-01-01

    In this study, the inhibitory effect of corn silk on melanin production was evaluated. This study was performed to investigate the inhibitory effect of corn silk on melanin production in Melan-A cells by measuring melanin production and protein expression. The corn silk extract applied on Melan-A cells at a concentration of 100 ppm decreased melanin production by 37.2% without cytotoxicity. This was a better result than arbutin, a positive whitening agent, which exhibited a 26.8% melanin prod...

  3. Experimental investigation of pyrolysis process of corn straw

    OpenAIRE

    Lei Wang; Shengqiang Shen; Shuhua Yang; Xinguang Shi

    2010-01-01

    The present paper was performed to analyze the pyrolysis process of corn straw. Based on the thermogravimetric analysis, the component of pyrolysis gas of corn straw was tested using the gas chromatograph analyzer. Experimental results showed that, as the reaction temperature increases, the component of H 2 and CH 4 increases, whereas the component of CO and CO 2 decreases. Finally, the mechanism of pyrolysis process of corn straw was revealed from the point of view of the molecular structure...

  4. Classificação Macroscópica, identificação da microbiota fúngica e produção de aflatoxinas em híbridos de milho Macroscopic classification, identification of fungal microbiota and aflatoxins production in corn hybrids

    Directory of Open Access Journals (Sweden)

    Paulo Dilkin

    2000-03-01

    Full Text Available Com o objetivo de medir o potencial de resistência de 5 diferentes híbridos de milho, logo após a colheita, ao crescimento de fungos e produção de aflatoxinas (AFs, foram avaliados os seguintes parâmetros: 1 aspecto macroscópico dos grãos, sendo os grãos de cada híbrido classificados como íntegros, danificados por insetos (DI ou danificados por fungos (DF; 2 contaminação fúngica dos híbridos; 3 potencial para resistência à produção de AFs, através do cultivo de Aspergillus parasiticus, linhagem NRRL 2999, sobre grãos de cada híbrido estudado; 4 consumo de matéria seca dos híbridos pelo cultivo fúngico. Como resultado, observou-se que 38% do milho de todos os híbridos apresentaram comprometimento macroscópico, sendo 26,7% DI e 11,3% DF. Os híbridos recém-colhidos apresentaram contaminação fúngica por Penicillium sp. (14,3%; Aspergillus sp. (23,6% e Fusarium sp. (57,1%. O potencial de produzir AFs pelos diferentes híbridos em cultivos por 5 e 10 dias apresentou diferença somente com relação à aflatoxina G2 em cultivos por 5 dias. A média de consumo de matéria seca dos híbridos de milho foi de 1,25 e 2,69% submetidos ao cultivo de fungos por períodos de 5 e 10 dias, respectivamente.To determine the resistance of five different recently harvested corn hybrids to fungal growth and aflatoxins (AFs production the following parameters were measured: 1 Macroscopic aspect of the grain and each hybrid classified as whole, damaged by insects (DI or damaged by fungi (DF; 2 Fungal contamination of hybrids 3 Resistance to AFs production, through the culture of Aspergillus parasiticus, NRRL 2999 strain, on each hybrid grain studied and 4 Consumption of dry matter of hybrids by the fungal culture. It was observad that 38% of all corn hybrids had macroscopic damage, being 26.7% DI and 11.3% DF. The recently harvested hybrids showed fungal contamination by Penicillium sp. (14.3%; Aspergillus sp. (23.6% and Fusarium sp. (57

  5. Management of ammonium sulfate fertilization on productive performance of corn grown after oats and wheat

    Directory of Open Access Journals (Sweden)

    Maria Anita Gonçalves Silva

    2014-02-01

    Full Text Available The time, dose and applied nutrients in corn have a direct effect on its productivity. Therefore, the objective was to study the application of N and S in corn as ammonium sulfate, in succession to wheat and oats and evaluate different forms of fertilizer management. The experiment was conducted in a randomized block design in Oxisol (Hapludox. The five treatments with N, at a dose of 120 kg ha-1 were applied in 20 plots (5x4, according to the management of fertilizer: T1-N (120 kg ha-1 full at sowing, T2-N (120 kg ha-1 total coverage; T3 –N (40 kg ha-1 at sowing and N (80 kg ha-1 in coverage; T4-N advance in wheat sowing and sowing oats (120 kg ha-1, T5- (control. The S doses were corresponding to their concentrations in the fertilizer. Only wheat received a dose of 24 kg N ha-1 at sowing all plots and oats received 24 kg N ha- 1 at sowing only the portions related to treatment with anticipation of corn N ( T4 . We evaluated the biomass production of winter crops (oats and wheat, according to the fertilization at sowing, and also the influence of winter crops and management of ammonium sulfate, the corn yield. The oats produced more dry matter in relation to wheat, positively influencing the corn yield, regardless of fertilizer management. The anticipation of ammonium sulfate, the sowing of oats, was favorable to corn yield, equating to other forms of management of fertilizer. Rotation corn and oats, forms management, ammonium sulphate, at seeding, topdressing or applied in split were equally efficient in corn yields.

  6. Assessment of the physiological potential of super sweet corn seeds

    OpenAIRE

    Alvarenga,Renata Oliveira; Marcos-Filho,Julio; Timóteo,Tathiana Silva

    2013-01-01

    The assessment of physiological potential is essential in seed quality control programs. This study compared the sensitivity of different procedures for evaluating super sweet corn seed vigor, focusing on the primary root protrusion test. Six seed lots, each of the SWB 551 and SWB 585 hybrids, were used. Seed physiological potential was evaluated by germination and vigor tests (speed of germination, traditional and saturated salt accelerated aging, cold test, seedling length, seedling emergen...

  7. Performance estimation of photovoltaic–thermoelectric hybrid systems

    International Nuclear Information System (INIS)

    Zhang, Jin; Xuan, Yimin; Yang, Lili

    2014-01-01

    A theoretical model for evaluating the efficiency of concentrating PV–TE (photovoltaic–thermoelectric) hybrid system is developed in this paper. Hybrid systems with different photovoltaic cells are studied, including crystalline silicon photovoltaic cell, silicon thin-film photovoltaic cell, polymer photovoltaic cell and copper indium gallium selenide photovoltaic cell. The influence of temperature on the efficiency of photovoltaic cell has been taken into account based on the semiconductor equations, which reveals different efficiency temperature characteristic of polymer photovoltaic cells. It is demonstrated that the polycrystalline silicon thin-film photovoltaic cell is suitable for concentrating PV–TE hybrid system through optimization of the convection heat transfer coefficient and concentrating ratio. The polymer photovoltaic cell is proved to be suitable for non-concentrating PV–TE hybrid system. - Highlights: • Performances of four types of photovoltaic–thermoelectric hybrid systems are studied. • Temperature is one of dominant factors of affecting the conversion efficiency of PV–TE systems. • One can select a proper PV–TE assembly system according to given operating conditions

  8. Effects of replacing corn with sorghum on the performance of overfed mule ducks.

    Science.gov (United States)

    Arroyo, J; Dubois, J P; Lavigne, F; Brachet, M; Fortun-Lamothe, L

    2016-06-01

    The aim of this trial was to study the effects of replacing yellow corn (C) with condensed tannin-free sorghum (S) during the finishing period (F period; age 53 to 79 d) and/or overfeeding period (O period; age 80 to 91 d) on the performance of overfed mule ducks. 192 ducks were divided into 4 groups (48 in each) differing in the cereal (yellow corn or sorghum) included in the diet given during the F and/or the O periods, using a 2 × 2 factorial arrangement of treatments : SS, SC, CS, CC. At the end of the O period, the birds were slaughtered after 10 h of fasting to measure foie gras and magret qualities. Mortality (1%; P > 0.05) and weight gain (2,030 g; P > 0.05) during the O period were similar in the 4 groups. At the end of the O period, birds overfed with sorghum had foie gras that was heavier (723 vs. 694 g in CS+SS vs. CC+SC, respectively; P 0.05), but the foie gras was less yellow in birds overfed with sorghum (14.84 vs. 26.01 for b* in CS+SS vs. CC+SC, respectively; P 0.05) but the color of the breast muscle and skin of magret was less yellow in birds overfed with sorghum compared with corn (12.26 vs. 12.92 and 13.84 vs. 18.30 in CS+SS vs. CC+SC, respectively; P duck foie gras production system because it increases foie gras weight without decreasing the weight of magret However, it changes the quality of the products, mainly their color. © 2016 Poultry Science Association Inc.

  9. Effect of corn- and soybean hull-based creep feed and backgrounding diets on lifelong performance and carcass traits of calves from pasture and rangeland conditions

    Science.gov (United States)

    Three separate studies were conducted to investigate the life-long effect of creep feeding, creep feeding energy source (soybean hulls, SC, or corn, CC) and interactive effects of creep feed with backgrounding dietary energy source (soybean hulls, SBR, or corn, CBR) on calf growth performance, carca...

  10. Performance, meat quality, and pectoral myopathies of broilers fed either corn or sorghum based diets supplemented with guanidinoacetic acid.

    Science.gov (United States)

    Córdova-Noboa, H A; Oviedo-Rondón, E O; Sarsour, A H; Barnes, J; Ferzola, P; Rademacher-Heilshorn, M; Braun, U

    2018-04-13

    One experiment was conducted to evaluate the effects of guanidinoacetic acid (GAA) supplementation in broilers fed corn or sorghum-based diets on live performance, carcass and cut up yields, meat quality, and pectoral myopathies. The treatments consisted of corn or sorghum-based diets with or without the addition of GAA (600 g/ton). A total of 800 one-d-old male Ross 708 broiler chicks were randomly placed in 40 floor pens with 10 replicates (20 birds per pen) per each of the four treatments. At hatch, 14, 35, and 50 d, BW and feed intake were recorded. BW gain and FCR were calculated at the end of each phase. Four broilers per pen were selected and slaughtered at 51d and 55d of age to determine carcass and cut up yields, meat quality and myopathies (spaghetti muscle, white striping, and wooden breast) severity in the Pectoralis major. Data were analyzed as a randomized complete block design in a 2 × 2 factorial arrangement with grain type and GAA supplementation as main effects. At 50 d, diets containing GAA improved (P broilers fed corn diets with GAA had higher breast meat yield (P 0.05) by GAA supplementation at any slaughter ages. However, GAA decreased (P broilers supplemented with GAA had double (P broilers fed non-supplemented diets, therefore reducing the severity of this myopathy. In conclusion, GAA supplementation improved broiler live performance in broilers raised up to 50 d independently of grain source, increased breast meat yield in corn-based diets and reduced the severity of wooden breast myopathy.

  11. Estratificação de ambientes, adaptabilidade e estabilidade de híbridos comerciais de milho para silagem no sul do Brasil Environmental stratification, adaptability and stability of commercial hybrids of corn for silage utilization in the south of Brazil

    Directory of Open Access Journals (Sweden)

    Jackson Silva e Oliveira

    2004-08-01

    Full Text Available O objetivo do presente trabalho foi realizar a estratificação dos ambientes utilizados para a avaliação de híbridos de milho para silagem na Região Sul do Brasil e identificar os materiais de comportamento mais adaptado e estável. Foram utilizados 21 híbridos de milho, de diferentes empresas produtoras de sementes, avaliados em sete locais da Região Sul do Brasil. Empregou-se o delineamento de blocos ao acaso, com três repetições. Empregaram-se as metodologias de EBERHART & RUSSELL (1966 e ANNICCHIARICO (1992 para o estudo da adaptabilidade e estabilidade da produtividade de matéria seca da silagem (t ha-1 e do potencial de produção de leite (kg ha-1 dos híbridos de milho. Observou-se ampla variação na adaptação e estabilidade dos híbridos estudados, evidenciando a possibilidade de identificação de híbridos adaptados às diferentes condições ambientais de cultivo para a silagem na Região Sul do Brasil e com comportamento estável. O híbrido DAS766 apresentou boa adaptação e estabilidade para a produtividade de matéria seca de silagem em ambientes favoráveis. Para o potencial de produção de leite, os híbridos mais adaptados e estáveis foram DAS766, P3021 e P3041. Os ambientes de Urussanga e Ijuí apresentaram-se semelhantes para a avaliação do potencial de produção de leite da silagem dos híbridos de milho na região Sul do Brasil.The objective of this work was to study the stratification of those environments used for corn hybrids evaluation for silage in the Southern Region of Brazil and identify those materials with the best adaptation and stability. Twenty-one corn hybrids from different seed companies were evaluated in seven locations in the Southern Region of Brazil. Trials were conducted using a randomized block design with three replications. The methodology used to study adaptability and stability of silage dry matter productivity (t ha-1 and potential for milk production (kg ha-1 of the corn

  12. ECONOMIC AND POWER EFFICIENCY OF CULTIVATION OF DIFFERENT GRADES AND GIBRIDOV CORN SUGAR

    Directory of Open Access Journals (Sweden)

    N. A. Didukh

    2013-01-01

    Full Text Available The results of study of the variety structure of sugar corn in the Left-bank Forest'steppe of Ukraine are presented in the article. In the group of early-maturing varieties, the hybrid Spirit was found to be the most productive (5,4 t/hectare and profitable (113,0 % with energy efficiency ratio 2,9. The mild'ripening hybrids Bold F1 and Bonus F1 showed the productivity – 4,8-5,7 t/hectare, the profitability – 101,8-124,9 %, and the energy efficiency ratio – 2,60-3,06, respectively.

  13. Fumonisins B₁, B₂ and B₃ in corn products, wheat flour and corn oil marketed in Shandong province of China.

    Science.gov (United States)

    Li, Fenghua; Jiang, Dafeng; Zheng, Fengjia; Chen, Jindong; Li, Wei

    2015-01-01

    In this study a total of 522 samples were collected from Shandong province of China in 2014 and analysed for the occurrence of fumonisin B1 (FB1), FB2 and FB3 by isotope dilution ultrahigh performance liquid chromatography-tandem mass spectrometry. Fumonisins were detected in 98.1% of the corn products, with the average total level of 369.2 μg kg(-1). The individual average values of FB1, FB2 and FB3 in corn products were 268.3, 53.7 and 47.2 μg kg(-1), respectively. The simultaneous occurrence of FB1, FB2 and FB3 was observed in 76.7% of the corn products. Especially, the results demonstrated that the difference in the contamination levels for fumonisins in these three types of corn products was apparent. In addition, 6.2% of the wheat flour samples were contaminated with FB1, with concentrations ranging from 0.3 to 34.6 µg kg(-1). No FB2 or FB3 was detected in wheat flour. In corn oil samples no fumonisins were detected.

  14. Performance, carcass yield, and meat quality of free-range broilers fed wet grain corn silage

    Directory of Open Access Journals (Sweden)

    ESPB Saldanha

    2006-06-01

    Full Text Available This study aimed at evaluating the effect of total replacement of dry corn by wet grain corn silage (WGCS in the feed of label broilers older than 28 days of age on performance, mortality, carcass, parts, breast meat and thighs meat yields, and meat quality. A mixed-sex flock of 448 ISA S 757-N (naked-neck ISA JA Label day-old chicks was randomly distributed in to randomized block experimental design with four treatments (T1 - with no WGCS; T2 - WGCS between 28 and 83 days; T3 - WGCS between 42 and 83 days; and T4 - WGCS between 63 and 83 days and four replicates of 28 birds each. Birds were raised under the same management and feeding conditions until 28 days of age, when they started to have free access to paddock with pasture (at least 3m²/bird and to be fed the experimental diets. Feed and water were offered ad libitum throughout the rearing period, which was divided in three stages: starter (1 to 28 days, grower (29 to 63 days, and finisher (64 to 83 days according to the feeding schedule. During the short periods of WGCS use (group T2 during grower stage and T4 during the finisher stage, performance and mortality results were similar as to those of the control group (T1. At the end of the experiment, it was observed that the extended use of WGCS (T2 and T3 determined a negative effect on feed conversion ratio. However, the best results of breast meat yield were observed with birds fed WGCS since 28 days (T2. It was concluded that WGCS can replace dry corn grain for short periods during the grower and finisher stages with no impairment of meat quality and yield in slow growth broilers.

  15. THE PRICING PERFORMANCE OF MARKET ADVISORY SERVICES IN CORN AND SOYBEANS OVER 1995-2000

    OpenAIRE

    Good, Darrel L.; Martines-Filho, Joao Gomes; Irwin, Scott H.

    2002-01-01

    The purpose of this research report is to evaluate the pricing performance of market advisory services for the 1995-2000 corn and soybean crops. Certain explicit assumptions are made to produce a consistent and comparable set of results across the different advisory programs. These assumptions are intended to accurately depict "real-world" marketing conditions. Several key assumptions are: i) with a few exceptions, the marketing window for a crop year runs from September before harvest throug...

  16. Effects of replacing wild rye, corn silage, or corn grain with CaO-treated corn stover and dried distillers grains with solubles in lactating cow diets on performance, digestibility, and profitability.

    Science.gov (United States)

    Shi, H T; Li, S L; Cao, Z J; Wang, Y J; Alugongo, G M; Doane, P H

    2015-10-01

    The objective of this study was to measure the effects of partially replacing wild rye (Leymus chinensis; WR), corn silage (CS), or corn grain (CG) in dairy cow diets with CaO-treated corn stover (T-CS) and corn dried distillers grains with soluble (DDGS) on performance, digestibility, blood metabolites, and income over feed cost. Thirty tonnes of air-dried corn stover was collected, ground, and mixed with 5% CaO. Sixty-four Holstein dairy cows were blocked based on days in milk, milk yield, and parity and were randomly assigned to 1 of 4 treatments. The treatments were (1) a diet containing 50% concentrate, 15% WR, 25% CS, and 10% alfalfa hay (CON); (2) 15% WR, 5% CG, and 6% soybean meal were replaced by 15% T-CS and 12% DDGS (RWR); (3) 12.5% CS, 6% CG, and 5% soybean meal were replaced by 12.5% T-CS and 12%DDGS (RCS); (4) 13% CG and 6% soybean meal were replaced by 7% T-CS and 13% DDGS (RCG). Compared with CON treatment, cows fed RCS and RCG diets had similar dry matter intake (CON: 18.2 ± 0.31 kg, RCS: 18.6 ± 0.31 kg, and RCG: 18.4 ± 0.40 kg). The RWR treatment tended to have lower dry matter intake than other treatments. The inclusion of T-CS and DDGS in treatment diets as a substitute for WR, CS, or CG had no effects on lactose percentage (CON: 4.96 ± 0.02%, RWR: 4.97 ± 0.02%, RCS: 4.96 ± 0.02%, and RCG: 4.94 ± 0.02%), 4% fat-corrected milk yield (CON: 22.7 ± 0.60 kg, RWR: 22.1 ± 0.60 kg, RCS: 22.7 ± 0.60 kg, and RCG: 22.7 ± 0.60 kg), milk fat yield (CON: 0.90 ± 0.03 kg, RWR: 0.86 ± 0.03 kg, RCS: 0.87 ± 0.03 kg, and RCG: 0.89 ± 0.03 kg), and milk protein yield (CON: 0.74 ± 0.02 kg, RWR: 0.72 ± 0.02 kg, RCS: 0.73 ± 0.02 kg, and RCG: 0.71 ± 0.02 kg). Cows fed the RWR diet had higher apparent dry matter digestibility (73.7 ± 1.30 vs. 70.2 ± 1.15, 69.9 ± 1.15, and 69.9 ± 1.15% for RWR vs. CON, RCS, and RCG, respectively) and lower serum urea N (3.55 ± 0.11 vs. 4.03 ± 0.11, 3.95 ± 0.11, and 3.99 ± 0.11 mmol/L for RWR vs. CON, RCS, and RCG

  17. Five Performance Enhancements for Hybrid Hash Join

    National Research Council Canada - National Science Library

    Graefe, Goetz

    1992-01-01

    .... We discuss five performance enhancements for hybrid hash join algorithms, namely data compression, large cluster sizes and multi-level recursion, role reversal of build and probe inputs, histogram...

  18. Study of improvement of indices maize line to establish their position in hybrids

    Directory of Open Access Journals (Sweden)

    Oxana DIRZU-COCOS

    2015-12-01

    Full Text Available Corn (Zea mays L. crop that is grown on large areas - over 140 million hectares worldwide, and 400-500 thousand ha in Moldova due to production potential broad diversity of use as food for humans, animals, birds raw material for industrial processing. The upward trend in average yields achieved is largely attributed to the improvement of scientific programs. Select the line with the characters and traits that are transmitted hereditary hybrids and contribute to their performance, ensure progress in improvement. Therefore, the process of creating inbred lines associated with combining ability testing as a measure of productivity conferred hybrids, is significant research programs. Orientation purpose of improved maize hybrids to formulas and simple change to a superior capitalization heterosis effect and perfect uniformity of plant requires changes in methodology for the creation, evaluation and classification of inbred lines.

  19. Effect of Irrigation Timing on Root Zone Soil Temperature, Root Growth and Grain Yield and Chemical Composition in Corn

    Directory of Open Access Journals (Sweden)

    Xuejun Dong

    2016-05-01

    Full Text Available High air temperatures during the crop growing season can reduce harvestable yields in major agronomic crops worldwide. Repeated and prolonged high night air temperature stress may compromise plant growth and yield. Crop varieties with improved heat tolerance traits as well as crop management strategies at the farm scale are thus needed for climate change mitigation. Crop yield is especially sensitive to night-time warming trends. Current studies are mostly directed to the elevated night-time air temperature and its impact on crop growth and yield, but less attention is given to the understanding of night-time soil temperature management. Delivering irrigation water through drip early evening may reduce soil temperature and thus improve plant growth. In addition, corn growers typically use high-stature varieties that inevitably incur excessive respiratory carbon loss from roots and transpiration water loss under high night temperature conditions. The main objective of this study was to see if root-zone soil temperature can be reduced through drip irrigation applied at night-time, vs. daytime, using three corn hybrids of different above-ground architecture in Uvalde, TX where day and night temperatures during corn growing season are above U.S. averages. The experiment was conducted in 2014. Our results suggested that delivering well-water at night-time through drip irrigation reduced root-zone soil temperature by 0.6 °C, increase root length five folds, plant height 2%, and marginally increased grain yield by 10%. However, irrigation timing did not significantly affect leaf chlorophyll level and kernel crude protein, phosphorous, fat and starch concentrations. Different from our hypothesis, the shorter, more compact corn hybrid did not exhibit a higher yield and growth as compared with taller hybrids. As adjusting irrigation timing would not incur an extra cost for farmers, the finding reported here had immediate practical implications for farm

  20. Evaluating fuel ethanol feedstocks from energy policy perspectives: A comparative energy assessment of corn and corn stover

    International Nuclear Information System (INIS)

    Lavigne, Amanda; Powers, Susan E.

    2007-01-01

    Concerns surrounding the continued, un-checked use of petroleum-based fuels in the transportation sector, the search for more sustainable, renewable alternatives, and the constraints of the existing supply infrastructure in the United States have placed a spotlight on biomass-derived fuels. The central question of the ethanol debate has changed from 'Should we make ethanol?' to 'From what should we make ethanol?' emphasizing the importance of understanding the differences between specific biomass supply systems for fuel ethanol. When presented with numerous options, the priorities of an individual decision maker will define which feedstock alternative is the most appropriate choice for development from their perspective. This paper demonstrates how energy data can be successfully used to quantify assessment metrics beyond a standard net energy value calculation, thus quantifying the relative 'value' of ethanol supply systems. This value is defined based on decision-maker priorities that were adopted from national energy policy priorities: increased national energy security and increased conservation of energy resources. Nine energy assessment metrics that quantify detailed system energy data are calculated and a straightforward comparative assessment is performed between corn and corn stover feedstocks produced under the same farm scenario. Corn stover is shown to be more compatible with the national energy policy priorities and it is recommended that additional research be performed on utilizing this feedstock from the corn farm

  1. Evaluation of normal yellow dent corn and high available phosphorus corn in combination with reduced dietary phosphorus and phytase supplementation for broilers grown to market weights in litter pens.

    Science.gov (United States)

    Yan, F; Kersey, J H; Fritts, C A; Waldroup, P W; Stilborn, H L; Crum, R C; Rice, D W; Raboy, V

    2000-09-01

    A study was conducted to determine the extent fecal P levels could be reduced while maintaining performance. Various strategies were employed including the use of a high available phosphorus hybrid of corn (HAPC), supplementation with phytase enzyme, and reduced dietary P levels. The use of HAPC resulted in a 50% reduction in phytate-bound dietary P as compared with a normal yellow dent corn (YDC) diet. Dietary nonphytate P was maintained at either NRC (1994) recommendations for appropriate age periods or reduced by 0.075 or 0.15%. Portions of the diets were supplemented with 1,000 units of phytase/kg. Male chicks of a commercial strain were grown to 56 d on the test diets. Broilers fed diets with HAPC had BW, feed conversion, livability, and tibia ash that were equal to or superior to those fed diets with YDC with considerably reduced fecal P content at any dietary level of nonphytate P. Phytase supplementation enabled birds to maintain live performance at lower levels of nonphytate P, further reducing the fecal P output. One of the greatest contributions of phytase was a reduction in mortality at the lower levels of nonphytate P. Dietary P levels could be reduced by 0.075% under NRC (1994) recommendations without adversely affecting live performance; a reduction of 0.15% in conjunction with phytase supplementation maintained BW, feed conversion, and livability but reduced tibia ash. The extent to which dietary P levels can be reduced over the entire feeding program is subject to further research.

  2. Our Mother Corn.

    Science.gov (United States)

    Mathers, Sherry; And Others

    Developed to provide an understanding of the magnitude of the role of corn, referred to as Mother Corn in the cultures of the Seneca, Pawnee, and Hopi tribes, the student text provides information on the tribes' basic lifestyles and the way they grew and used corn in three different parts of the United States. The section on the origin of corn…

  3. Performance evaluation of stand alone hybrid PV-wind generator

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H. [Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia); Yahaya, M. S. [Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia)

    2015-05-15

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  4. Performance evaluation of stand alone hybrid PV-wind generator

    Science.gov (United States)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H.; Yahaya, M. S.

    2015-05-01

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  5. Performance evaluation of stand alone hybrid PV-wind generator

    International Nuclear Information System (INIS)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H.; Yahaya, M. S.

    2015-01-01

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand

  6. Effect of insertion of Bt gene in corn and different fumonisin content on growth performance of weaned piglets

    Directory of Open Access Journals (Sweden)

    Filippo Rossi

    2011-04-01

    Full Text Available The objective of this study was to compare the effect of Bt corn and isogenic corn on the growth of weaned piglets. One hundred twenty-eight weaned piglets weighing 8.8 ±1.27 kg live weight were randomly assigned to 4 groups of 32 animals each (16 castrated males and 16 females. Bt corn (line MON810 and isogenic corn were produced at two farms located in the Lodi and Venezia provinces (northern Italy. Bt corn had the same chemical composition as the isogenic corn but a lower content of fumonisin B1 (FB1. The experimental period (35 days was divided into two phases: 0-14 d and 15-35 d. There was no significant difference in average daily gain (ADG among groups during the first feeding phase. Compared to animals fed isogenic corn, the piglets fed Bt maize gained more weight during the second feeding phase (Bt: 464.1 g/d, isogenic: 429.1 g/d; P < 0.05. Also, the ADG over the entire trial was higher in piglets fed Bt corn versus piglets fed isogenic corn (Bt: 396.4 g/d, isogenic: 374.1 g/d; P < 0.05. The ADG of the whole period decreased linearly (P<0.05 with respect to FB1 content of diet. Final weight was higher in piglets fed the diet containing Bt corn (Bt: 22.68 kg, isogenic: 21.83 kg; P < 0.05. No differences in feed intake and in the feed:gain ratio were observed, however a linear response between FB1 and feed:gain ratio in first 14 days of the experiment was detected.

  7. Yield and quality of sweet corn at different plant populationsProdutividade e qualidade do milho doce em diferentes populações de plantas

    Directory of Open Access Journals (Sweden)

    Renan Soares de Souza

    2013-06-01

    Full Text Available The objective of this study was to evaluate the plant population density effect upon yield components and the chemical composition of grains in two sweet corn hybrids in “Winter-Spring” cultivation. The experimental design used was the complete randomized blocks with four replications. The treatments were based on the combination between two sweet corn hybrids (Tropical Plus e RB-6324 and five plant populations (40,000, 55.000, 70,000, 85,000 and 100,000 plants ha-1, in a factorial scheme 2 x 5, evaluated in two “winter-spring” growing seasons (2009 and 2010. The increment in the population of 40,000 to 100,000 plants ha-1 resulted in higher husked commercial corn ear productivity in both hybrids, Tropical Plus and RB-6324. The increase of plant population reduced the length and diameter of corn ears in Tropical Plus and RB-6324. The mass of the corn ears from Tropical Plus also reduced; however, it did not affect the commercial standard and industrial use. In larger plant populations the hybrid RB-6324 produced corn ears with grains that were sweeter and with lower starch content. The hybrid Tropical Plus presented higher mass, length, productivity, sugar content and lower diameter of corn ears when compared to RB-6324.O objetivo do presente estudo foi avaliar o efeito da população de plantas sobre os componentes de produção e a composição química de grãos de dois híbridos de milho doce no cultivo de “Inverno – Primavera”. O delineamento experimental utilizado foi o de blocos completos casualizados com quatro repetições. Os tratamentos constituíram-se da combinação entre híbridos de milho doce (Tropical Plus e RB-6324 e populações de plantas (40.000, 55.000, 70.000, 85.000 e 100.000 plantas ha-1, no esquema fatorial 2 x 5, avaliados em dois anos agrícolas (2009 e 2010, em cultivo de Inverno-Primavera. O incremento na população de plantas de 40.000 até 100.000 plantas ha-1 resultou em maiores produtividades de

  8. Comparison of the side-needle and knife techniques for inducing Aspergillus flavus infection and aflatoxin accumulation in corn hybrids

    Science.gov (United States)

    Aflatoxin in corn grain is a problem in many areas of the world. Any combination of environmentally stressful or agronomically unfavorable conditions can increase the likelihood of Aspergillus flavus infection and production of aflatoxin in the corn grain. In the absence of a consistent natural A....

  9. A Hybrid Task Graph Scheduler for High Performance Image Processing Workflows.

    Science.gov (United States)

    Blattner, Timothy; Keyrouz, Walid; Bhattacharyya, Shuvra S; Halem, Milton; Brady, Mary

    2017-12-01

    Designing applications for scalability is key to improving their performance in hybrid and cluster computing. Scheduling code to utilize parallelism is difficult, particularly when dealing with data dependencies, memory management, data motion, and processor occupancy. The Hybrid Task Graph Scheduler (HTGS) improves programmer productivity when implementing hybrid workflows for multi-core and multi-GPU systems. The Hybrid Task Graph Scheduler (HTGS) is an abstract execution model, framework, and API that increases programmer productivity when implementing hybrid workflows for such systems. HTGS manages dependencies between tasks, represents CPU and GPU memories independently, overlaps computations with disk I/O and memory transfers, keeps multiple GPUs occupied, and uses all available compute resources. Through these abstractions, data motion and memory are explicit; this makes data locality decisions more accessible. To demonstrate the HTGS application program interface (API), we present implementations of two example algorithms: (1) a matrix multiplication that shows how easily task graphs can be used; and (2) a hybrid implementation of microscopy image stitching that reduces code size by ≈ 43% compared to a manually coded hybrid workflow implementation and showcases the minimal overhead of task graphs in HTGS. Both of the HTGS-based implementations show good performance. In image stitching the HTGS implementation achieves similar performance to the hybrid workflow implementation. Matrix multiplication with HTGS achieves 1.3× and 1.8× speedup over the multi-threaded OpenBLAS library for 16k × 16k and 32k × 32k size matrices, respectively.

  10. Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites

    Energy Technology Data Exchange (ETDEWEB)

    Jawaid, M. [School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Abdul Khalil, H.P.S., E-mail: akhalilhps@gmail.com [School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Abu Bakar, A. [School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2010-11-15

    Research highlights: {yields} Hybrid composites constituents of natural fibres show good mechanical performances. {yields} Hybridization with 20% jute fibre gives rise to sufficient modulus to composites. {yields} Outer or core material affect mechanical performance of hybrid composites. {yields} Impact strength of pure EFB composite is higher than hybrid composites. - Abstract: Oil palm empty fruit bunches (EFB)/jute fibre reinforced epoxy hybrid composites with different sequence of fibre mat arrangement such as EFB/jute/EFB and jute/EFB/jute were fabricated by hand lay-up method. The effect of layering patterns on the mechanical performance of the composites was studied. The hybrid composites are intended for engineering applications as an alternative to synthetic fibre composites. Mechanical performance of hybrid composites were evaluated and compared with the pure EFB, pure jute composites and neat epoxy using flexural and impact testing. The flexural properties of hybrid composite is higher than that of pure EFB composite with respect to the weight fraction of fibre, where as the impact strength of pure EFB composite is much higher than those of hybrid composites. The flexural results were interpreted using sandwich theory. The fracture surface morphology of the impact testing samples of the hybrid composites was performed by scanning electron microscopy (SEM).

  11. Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites

    International Nuclear Information System (INIS)

    Jawaid, M.; Abdul Khalil, H.P.S.; Abu Bakar, A.

    2010-01-01

    Research highlights: → Hybrid composites constituents of natural fibres show good mechanical performances. → Hybridization with 20% jute fibre gives rise to sufficient modulus to composites. → Outer or core material affect mechanical performance of hybrid composites. → Impact strength of pure EFB composite is higher than hybrid composites. - Abstract: Oil palm empty fruit bunches (EFB)/jute fibre reinforced epoxy hybrid composites with different sequence of fibre mat arrangement such as EFB/jute/EFB and jute/EFB/jute were fabricated by hand lay-up method. The effect of layering patterns on the mechanical performance of the composites was studied. The hybrid composites are intended for engineering applications as an alternative to synthetic fibre composites. Mechanical performance of hybrid composites were evaluated and compared with the pure EFB, pure jute composites and neat epoxy using flexural and impact testing. The flexural properties of hybrid composite is higher than that of pure EFB composite with respect to the weight fraction of fibre, where as the impact strength of pure EFB composite is much higher than those of hybrid composites. The flexural results were interpreted using sandwich theory. The fracture surface morphology of the impact testing samples of the hybrid composites was performed by scanning electron microscopy (SEM).

  12. Histopathological Effects of Bt and TcdA Insecticidal Proteins on the Midgut Epithelium of Western Corn Rootworm Larvae (Diabrotica virgifera virgifera

    Directory of Open Access Journals (Sweden)

    Andrew J. Bowling

    2017-05-01

    Full Text Available Western corn rootworm (WCR, Diabrotica virgifera virgifera LeConte is a major corn pest in the United States, causing annual losses of over $1 billion. One approach to protect against crop loss by this insect is the use of transgenic corn hybrids expressing one or more crystal (Cry proteins derived from Bacillus thuringiensis. Cry34Ab1 and Cry35Ab1 together comprise a binary insecticidal toxin with specific activity against WCR. These proteins have been developed as insect resistance traits in commercialized corn hybrids resistant to WCR feeding damage. Cry34/35Ab1 is a pore forming toxin, but the specific effects of Cry34/35Ab1 on WCR cells and tissues have not been well characterized microscopically, and the overall histopathology is poorly understood. Using high-resolution resin-based histopathology methods, the effects of Cry34/35Ab1 as well as Cry3Aa1, Cry6Aa1, and the Photorhabdus toxin complex protein TcdA have been directly visualized and documented. Clear symptoms of intoxication were observed for all insecticidal proteins tested, including swelling and sloughing of enterocytes, constriction of midgut circular muscles, stem cell activation, and obstruction of the midgut lumen. These data demonstrate the effects of these insecticidal proteins on WCR midgut cells, and the collective response of the midgut to intoxication. Taken together, these results advance our understanding of the insect cell biology and pathology of these insecticidal proteins, which should further the field of insect resistance traits and corn rootworm management.

  13. Monitoring Agricultural Drought Using Geographic Information Systems and Remote Sensing on the Primary Corn and Soybean Belt in the United States

    Science.gov (United States)

    Al-Shomrany, Adel

    The study aims to evaluate various remote sensing drought indices to assess those most fitting for monitoring agricultural drought. The objectives are (1) to assess and study the impact of drought effect on (corn and soybean) crop production by crop mapping information and GIS technology; (2) to use Geographical Weighted Regression (GWR) as a technical approach to evaluate the spatial relationships between precipitation vs. irrigated and non-irrigated corn and soybean yield, using a Nebraska county-level case study; (3) to assess agricultural drought indices derived from remote sensing (NDVI, NMDI, NDWI, and NDII6); (4) to develop an optimal approach for agricultural drought detection based on remote sensing measurements to determine the relationship between US county-level yields versus relatively common variables collected. Extreme drought creates low corn and soybean production where irrigation systems are not implemented. This results in a lack of moisture in soil leading to dry land and stale crop yields. When precipitation and moisture is found across all states, corn and soybean production flourishes. For Kansas, Nebraska, and South Dakota, irrigation management methods assist in strong crop yields throughout SPI monthly averages. The data gathered on irrigation consisted of using drought indices gathered by the national agricultural statistics service website. For the SPI levels ranging between one-month and nine-months, Kansas and Nebraska performed the best out of all 12-states contained in the Midwestern primary Corn and Soybean Belt. The reasoning behind Kansas and Nebraska's results was due to a more efficient and sustainable irrigation system, where upon South Dakota lacked. South Dakota was leveled by strong correlations throughout all SPI periods for corn only. Kansas showed its strongest correlations for the two-month and three-month averages, for both corn and soybean. Precipitation regression with irrigated and non-irrigated maize (corn) and

  14. Optimum Performance-Based Seismic Design Using a Hybrid Optimization Algorithm

    Directory of Open Access Journals (Sweden)

    S. Talatahari

    2014-01-01

    Full Text Available A hybrid optimization method is presented to optimum seismic design of steel frames considering four performance levels. These performance levels are considered to determine the optimum design of structures to reduce the structural cost. A pushover analysis of steel building frameworks subject to equivalent-static earthquake loading is utilized. The algorithm is based on the concepts of the charged system search in which each agent is affected by local and global best positions stored in the charged memory considering the governing laws of electrical physics. Comparison of the results of the hybrid algorithm with those of other metaheuristic algorithms shows the efficiency of the hybrid algorithm.

  15. Hydrocolloid occlusion for the treatment of neurovascular corns

    DEFF Research Database (Denmark)

    Petersen, Lars Jelstrup; Beck, Jan Walther; Reumert, L N

    1991-01-01

    The goal of this study was to determine the effect of hydrocolloid occlusion on neurovascular corns. The design was an observer-blinded, randomized, controlled study. Thirty consecutive patients participated in the trial. The patients received curettage alone or curettage with hydrocolloid...... occlusion. Six treatments were given over 12 weeks. A follow-up examination was performed 3 months after termination of the trial. Outcome measures were the size of the corns, a discomfort score, and an overall judgment of the trial. The results demonstrated no benefit of occlusion for symptoms or signs...... of neurovascular corns. The patients treated with occlusion were, however, generally more satisfied than the conventional group....

  16. A Remote Sensing-Derived Corn Yield Assessment Model

    Science.gov (United States)

    Shrestha, Ranjay Man

    be further associated with the actual yield. Utilizing satellite remote sensing products, such as daily NDVI derived from Moderate Resolution Imaging Spectroradiometer (MODIS) at 250 m pixel size, the crop yield estimation can be performed at a very fine spatial resolution. Therefore, this study examined the potential of these daily NDVI products within agricultural studies and crop yield assessments. In this study, a regression-based approach was proposed to estimate the annual corn yield through changes in MODIS daily NDVI time series. The relationship between daily NDVI and corn yield was well defined and established, and as changes in corn phenology and yield were directly reflected by the changes in NDVI within the growing season, these two entities were combined to develop a relational model. The model was trained using 15 years (2000-2014) of historical NDVI and county-level corn yield data for four major corn producing states: Kansas, Nebraska, Iowa, and Indiana, representing four climatic regions as South, West North Central, East North Central, and Central, respectively, within the U.S. Corn Belt area. The model's goodness of fit was well defined with a high coefficient of determination (R2>0.81). Similarly, using 2015 yield data for validation, 92% of average accuracy signified the performance of the model in estimating corn yield at county level. Besides providing the county-level corn yield estimations, the derived model was also accurate enough to estimate the yield at finer spatial resolution (field level). The model's assessment accuracy was evaluated using the randomly selected field level corn yield within the study area for 2014, 2015, and 2016. A total of over 120 plot level corn yield were used for validation, and the overall average accuracy was 87%, which statistically justified the model's capability to estimate plot-level corn yield. Additionally, the proposed model was applied to the impact estimation by examining the changes in corn yield

  17. Tissue-specific biomass recalcitrance in corn stover pretreated with liquid hot-water: enzymatic hydrolysis (part 1).

    Science.gov (United States)

    Zeng, Meijuan; Ximenes, Eduardo; Ladisch, Michael R; Mosier, Nathan S; Vermerris, Wilfred; Huang, Chia-Ping; Sherman, Debra M

    2012-02-01

    Lignin content, composition, distribution as well as cell wall thickness, structures, and type of tissue have a measurable effect on enzymatic hydrolysis of cellulose in lignocellulosic feedstocks. The first part of our work combined compositional analysis, pretreatment and enzyme hydrolysis for fractionated pith, rind, and leaf tissues from a hybrid stay-green corn, in order to identify the role of structural characteristics on enzyme hydrolysis of cell walls. The extent of enzyme hydrolysis follows the sequence rind cellulose to glucose in 24 h in the best cases. Physical fractionation of corn stalks or other C(4) grasses into soft and hard tissue types could reduce cost of cellulose conversion by enabling reduced enzyme loadings to hydrolyze soft tissue, and directing the hard tissue to other uses such as thermal processing, combustion, or recycle to the land from which the corn was harvested. Copyright © 2011 Wiley Periodicals, Inc.

  18. Performance analysis of switching based hybrid FSO/RF transmission

    KAUST Repository

    Usman, Muneer; Yang, Hongchuan; Alouini, Mohamed-Slim

    2014-01-01

    Hybrid free space optical (FSO)/ radio frequency (RF) systems have emerged as a promising solution for high data rate wireless back haul.We present and analyze a switching based transmission scheme for hybrid FSO/RF system. Specifically, either FSO or RF link will be active at a certain time instance, with FSO link enjoying a higher priority. Analytical expressions have been obtained for the outage probability, average bit error rate and ergodic capacity for the resulting system. Numerical examples are presented to compare the performance of the hybrid scheme with FSO only scenario.

  19. Performance analysis of switching based hybrid FSO/RF transmission

    KAUST Repository

    Usman, Muneer

    2014-09-01

    Hybrid free space optical (FSO)/ radio frequency (RF) systems have emerged as a promising solution for high data rate wireless back haul.We present and analyze a switching based transmission scheme for hybrid FSO/RF system. Specifically, either FSO or RF link will be active at a certain time instance, with FSO link enjoying a higher priority. Analytical expressions have been obtained for the outage probability, average bit error rate and ergodic capacity for the resulting system. Numerical examples are presented to compare the performance of the hybrid scheme with FSO only scenario.

  20. Polylactide-based renewable green composites from agricultural residues and their hybrids.

    Science.gov (United States)

    Nyambo, Calistor; Mohanty, Amar K; Misra, Manjusri

    2010-06-14

    Agricultural natural fibers like jute, kenaf, sisal, flax, and industrial hemp have been extensively studied in green composites. The continuous supply of biofibers in high volumes to automotive part makers has raised concerns. Because extrusion followed by injection molding drastically reduces the aspect ratio of biofibers, the mechanical performance of injection molded agricultural residue and agricultural fiber-based composites are comparable. Here, the use of inexpensive agricultural residues and their hybrids that are 8-10 times cheaper than agricultural fibers is demonstrated to be a better way of getting sustainable materials with better performance. Green renewable composites from polylactide (PLA), agricultural residues (wheat straw, corn stover, soy stalks, and their hybrids) were successfully prepared through twin-screw extrusion, followed by injection molding. The effect on mechanical properties of varying the wheat straw amount from 10 to 40 wt % in PLA-wheat straw composites was studied. Tensile moduli were compared with theoretical calculations from the rule of mixture (ROM). Combination of agricultural residues as hybrids is proved to reduce the supply chain concerns for injection molded green composites. Densities of the green composites were found to be lower than those of conventional glass fiber composites.

  1. Performance assessment of hybrid power generation systems: Economic and environmental impacts

    International Nuclear Information System (INIS)

    Al-Sharafi, Abdullah; Yilbas, Bekir S.; Sahin, Ahmet Z.; Ayar, T.

    2017-01-01

    Highlights: • A double-step optimization tool for hybrid power generation systems is introduced. • Economical aspects and the impact of the system on the environment are considered. • A hybrid system comprises PV array-wind turbine-battery-diesel engine is considered. • Real time analysis of the system for full year simulation is carried out. • System optimum configuration at point where total performance index is maximized. - Abstract: This article aims to introduce a double-step performance assessment tool for the hybrid power generation systems. As a case study, a hybrid system comprising PV array, wind-turbine, battery bank and diesel engine is incorporated in hourly based simulations to meet power demand of a residence unit at Dhahran area, Kingdom of Saudi Arabia. Different indicators related to economical and environmental performance assessments of the hybrid system have been considered. In the economic related assessment case, cost of electricity, energy excess percentage, and operating life cycle indicators have been considered and combined to develop the first overall performance index. Renewable contribution, renewable source availability and environmental impact indicators have been considered for the environmental assessment case and they are combined in the second performance index. For either economical or environmental cases, the optimum configuration of the system is achieved by maximizing the first and second overall performance indicators. This innovative optimization tools gives the designer the freedom to assign suitable weights associated with economical aspect, environmental impact, governmental regulations and social impact, for the first and second overall performance indicators, and combine them in the total performance index. The optimum system configuration is at the point where the total performance index is maximized.

  2. PATH-ANALYSIS ON SEVERAL CHARACTERS IN POTENTIAL OF CORN PRODUCTION AND RESISTANCE TO DOWNY MILDEW

    Directory of Open Access Journals (Sweden)

    Eko Hary Pudjiwati

    2013-06-01

    Full Text Available This research was aimed at investigating both direct and indirect impacts, and heritability values of characters regarding the potential of corn production and resistance to downy mildew. The result of this investigation is required to determine some criteria taken into account for selection process of downy mildew-resistant corn breeding with high yield. The field experiment was conducted at Research Centre of Agriculture Faculty, Brawijaya University from January to April 2012. Five varieties of hybrid crown and five inbreeding lines were employed, and Randomised Block Design was applied with two replications. As observed, the characters held heritability ranging from average to high, except for heritability of length and width of stomata on the lower surface of the leaves which was categorised as low. Moreover, the stomata density found on lower surface of the leaves was directly and positively correlated to the intensity of attack by downy mildew, which, then, was used as criteria selection in downy mildew-resistance. The intensity of disease and the density of the stomata on lower surface of the leaves accounted for direct and negative correlation to corn production, while the length and diameter of corncob was responsible for direct and positive correlation to corn production. The betterment of corn production can be coped by improving the plant resistance to downy mildew and characters of corncob diameter.

  3. Experimental Investigation for Tensile Performance of GFRP-Steel Hybridized Rebar

    Directory of Open Access Journals (Sweden)

    Dong-Woo Seo

    2016-01-01

    Full Text Available Tensile performance of the recently developed “FRP Hybrid Bar” at Korea Institute of Civil Engineering and Building Technology (KICT is experimentally evaluated by the authors. FRP Hybrid Bar is introduced to overcome the low elastic modulus of the existing GFRP bars to be used as a structural member in reinforced concrete structures. The concept of material hybridization is applied to increase elastic modulus of GFRP bars by using steel. This hybridized GFRP bar can be used in concrete structures as a flexural reinforcement with a sufficient level of elastic modulus. In order to verify the effect of material hybridization on tensile properties, tensile tests are conducted. The test results for both FRP Hybrid Bar and the existing GFRP bars are compared. The results indicate that the elastic modulus of FRP Hybrid Bar can be enhanced by up to approximately 250 percent by the material hybridization with a sufficient tensile strength. To ensure the long-term durability of FRP Hybrid Bar to corrosion resistance, the individual and combined effects of environmental conditions on FRP Hybrid Bar itself as well as on the interface between rebar and concrete are currently under investigation.

  4. Multi-state trials of Bt sweet corn varieties for control of the corn earworm (Lepidoptera: Noctuidae).

    Science.gov (United States)

    Shelton, A M; Olmstead, D L; Burkness, E C; Hutchison, W D; Dively, G; Welty, C; Sparks, A N

    2013-10-01

    Field tests in 2010-2011 were performed in New York, Minnesota, Maryland, Ohio, and Georgia to compare Bt sweet corn lines expressing Cry1A.105 + Cry2Ab2 and Cry1Ab with their non-Bt isolines, with and without the use of foliar insecticides. The primary insect pest in all locations during the trial years was Heliocoverpa zea (Boddie), which is becoming the most serious insect pest of sweet corn in the United States. At harvest, the ears were measured for marketability according to fresh market and processing standards. For fresh market and processing, least squares regression showed significant effects of protein expression, state, and insecticide frequency. There was a significant effect of year for fresh market but not for processing. The model also showed significant effects of H. zea per ear by protein expression. Sweet corn containing two genes (Cry1A.105 + Cry2Ab2) and a single gene (Cry1Ab) provided high marketability, and both Bt varieties significantly outperformed the traditional non-Bt isolines in nearly all cases regardless of insecticide application frequency. For pest suppression of H. zea, plants expressing Bt proteins consistently performed better than non-Bt isoline plants, even those sprayed at conventional insecticide frequencies. Where comparisons in the same state were made between Cry1A.105 + Cry2Ab2 and Cry1Ab plants for fresh market, the product expressing Cry1A.105 + Cry2Ab2 provided better protection and resulted in less variability in control. Overall, these results indicate Cry1A.105 + Cry2Ab2 and Cry1Ab plants are suitable for fresh market and processing corn production across a diversity of growing regions and years. Our results demonstrate that Bt sweet corn has the potential to significantly reduce the use of conventional insecticides against lepidopteran pests and, in turn, reduce occupational and environmental risks that arise from intensive insecticide use.

  5. Acute and Subacute Toxicity Evaluation of Corn Silk Extract.

    Science.gov (United States)

    Ha, Ae Wha; Kang, Hyeon Jung; Kim, Sun Lim; Kim, Myung Hwan; Kim, Woo Kyoung

    2018-03-01

    Many studies have reported therapeutic efficacy of corn silk extract. However, research on its toxicity and safe dose range is limited. Thus, the objective of this study was to determine the acute and subacute toxicity of corn silk extract in ICR mice. To determine acute toxicity, corn silk extract containing high levels of maysin was orally administered to mice at a dose of 0 or 2,000 mg/kg. Clinical symptoms, mortality, and body weight changes were recorded for 14 days. To determine subacute toxicity, corn silk extract was orally administered to mice over a 4-week period, and then body weight, water and food consumption, and organ weight were determined. In addition, urine and serum analyses were performed. In the acute toxicity study, no death or abnormal symptoms was observed in all treatment groups during the study period. Body weights did not show any significant change compared to those of the control group. Lethal dose of corn silk extract was estimated to be more than 2,000 mg/kg. In the 4-week subacute toxicity study, there was no corn silk extract related toxic effect on body weight, water intake, food consumption, urine parameters, clinical chemistry, or organ weight. Histopathological examination showed no abnormality related to the administration of corn silk extract at 500 mg/kg. The maximum non-toxic dose of corn silk extract containing high levels of maysin was found to be more than 500 mg/kg.

  6. Hybrid Gear Performance Under Loss-of-Lubrication Conditions

    Science.gov (United States)

    Laberge, Kelsen E.; Berkebile, Stephen P.; Handschuh, Robert F.; Roberts, Gary D.

    2017-01-01

    Hybrid composite gear technology is being investigated to increase power density in rotorcraft drive systems. These gears differ from conventional steel gears in that the structural web material is replaced with a lightweight carbon fiber composite. Past studies have focused on performance of this technology under normal operating conditions, however, for this technology to be viable it must also withstand adverse conditions. The study presented here evaluates the performance of hybrid gears under loss-of-lubrication conditions in NASA Glenn Research Centers Contact Fatigue Test Facility. Two experiments are presented using small-scale 3.5 inch (8.9 cm) pitch diameter hybrid gears and compared to a baseline steel gear pair. Results of these tests show that there are limitations to the use of a hexagonal interlock pattern between the steel and composite. There is also evidence that the presence of polymer in the gear during an oil out event has a potential to increase time to failure. Further studies are planned to expand on these initial findings.

  7. Gas-Transport-Property Performance of Hybrid Carbon Molecular Sieve−Polymer Materials

    KAUST Repository

    Das, Mita

    2010-10-06

    High-performance hybrid materials using carbon molecular sieve materials and 6FDA-6FpDA were produced. A detailed analysis of the effects of casting processes and the annealing temperature is reported. Two existing major obstacles, sieve agglomeration and residual stress, were addressed in this work, and subsequently a new membrane formation technique was developed to produce high-performing membranes. The successfully improved interfacial region of the hybrid membranes allows the sieves to increase the selectivity of the membranes above the neat polymer properties. Furthermore, an additional performance enhancement was seen with increased sieve loading in the hybrid membranes, leading to an actual performance above the upper bound for pure polymer membranes. The membranes were also tested under a mixed-gas environment, which further demonstrated promising results. © 2010 American Chemical Society.

  8. Legumes and forage species sole or intercropped with corn in soybean-corn succession in midwestern Brazil

    Directory of Open Access Journals (Sweden)

    Gessí Ceccon

    2013-02-01

    Full Text Available The feasibility of no-tillage in the Cerrado (Savanna-like vegetation of Brazil depends on the production of sufficient above-ground crop residue, which can be increased by corn-forage intercropping. This study evaluated how above-ground crop residue production and yields of soybean and late-season corn in a soybean-corn rotation were influenced by the following crops in the year before soybean: corn (Zea mays L. intercropped with Brachiaria (Urochloa brizantha cv. Marandu, B. decumbens cv. Basilisk, B. ruziziensis, cv. comum., Panicummaximum cv. Tanzânia, sunn hemp (Crotalaria juncea L., pigeon pea [Cajanus cajan (L. Millsp]; sole corn, forage sorghum [Sorghum bicolor (L. Moench (cv. Santa Elisa], and ruzi grass. In March 2005, corn and forage species were planted in alternate rows spaced 0.90 m apart, and sole forage species were planted in rows spaced 0.45 m apart. In October 2005, the forages were killed with glyphosate and soybean was planted. After the soybean harvest in March 2006, sole late-season corn was planted in the entire experimental area. Corn grain and stover yields were unaffected by intercropping. Above-ground crop residue was greater when corn was intercropped with Tanzania grass (10.7 Mg ha-1, Marandu (10.1 Mg ha-1, and Ruzi Grass (9.8 Mg ha-1 than when corn was not intercropped (4.0 Mg ha-1. The intercropped treatments increased the percentage of soil surface covered with crop residue. Soybean and corn grain yields were higher after sole ruzi grass and intercropped ruzi grass than after other crops. The intercropping corn with Brachiaria spp. and corn with Panicum spp. increases above-ground crop residue production and maintains nutrients in the soil without reducing late-season corn yield and the viability of no-till in the midwestern region of Brazil.

  9. Performance and energy management of a novel full hybrid electric powertrain system

    International Nuclear Information System (INIS)

    Chung, Cheng-Ta; Hung, Yi-Hsuan

    2015-01-01

    This study compared the performance and energy management between a novel full hybrid electric powertrain and a traditional power-split hybrid system. The developed planetary gearset and dual clutch configuration provides five operation modes. Equations for the torque and speed of power sources for the planetary gearset and dual clutch system and the Toyota Hybrid System are firstly derived. By giving vehicle performance of gradability, maximal speeds in hybrid and pure electric modes, the power sources of the 210 kg target vehicle are: a 125 cc engine and two 1.8 kW motor and generator. The optimal tank-to-wheel efficiencies, ratios of circulating power, and operation points at specific vehicle speeds and out loads are calculated. Simulation results show that the dual-motor electric vehicle mode offers superior performance regarding electric drive; the low capacity of the battery is conducive to reducing manufacturing and maintenance costs; the tank-to-wheel efficiency is mainly operated above 20% while the power split electronic-continuously-variable-transmission mode is the major operation mode, and a maximum of 17% fuel economy improvement is achieved compared with the Toyota Hybrid System in most of the vehicle speed ranges. The outstanding performance warrants further real-system development, especially regarding the implementation in plug-in and sport hybrid powertrain designs. - Highlights: • An innovative power split hybrid powertrain was designed. • Dual-motor electric-vehicle mode highlighted for plug-in function. • Power circulation ratios and five driving modes were analyzed. • Global search method utilized for optimal energy management. • Maximal 17+% fuel improvement compared to Toyota Hybrid System

  10. Public-private partnering for improving performance of corn nitrogen fertilization tools

    Science.gov (United States)

    Nitrogen fertilization for corn production is complicated by soil and weather variability, yet such has far-reaching economic and environmental implications. To address this challenge, alternative N management strategies have been explored extensively in recent years for determining the most consist...

  11. 21 CFR 184.1321 - Corn gluten.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Corn gluten. 184.1321 Section 184.1321 Food and... Substances Affirmed as GRAS § 184.1321 Corn gluten. (a) Corn gluten (CAS Reg. No. 66071-96-3), also known as corn gluten meal, is the principal protein component of corn endosperm. It consists mainly of zein and...

  12. Performance of an Orifice Compensated Two-Lobe Hole-Entry Hybrid Journal Bearing

    Directory of Open Access Journals (Sweden)

    J. Sharana Basavaraja

    2008-01-01

    Full Text Available The work presented in this paper aims to study the performance of a two-lobe hole-entry hybrid journal bearing system compensated by orifice restrictors. The Reynolds equation governing the flow of lubricant in the clearance space between the journal and bearing together with the equation of flow through an orifice restrictor has been solved using FEM and Galerkin's method. The bearing performance characteristics results have been simulated for an orifice compensated nonrecessed two-lobe hole-entry hybrid journal bearing symmetric configuration for the various values of offset factor (, restrictor design parameter (2, and the value of external load (0. Further, a comparative study of the performance of a two-lobe hole-entry hybrid journal bearing system with a circular hole-entry symmetric hybrid journal bearing system has also been carried out so that a designer has a better flexibility in choosing a suitable bearing configuration. The simulated numerical results indicate that for the two-lobe symmetric hole-entry hybrid journal bearing system with an offset factor ( greater than one provides 30 to 50 percent larger values of direct stiffness and direct damping coefficients as compared to a circular symmetric hole-entry hybrid journal bearing system.

  13. SANITY OF CORN GRAINS AS A FUNCTION OF GENETIC MATERIAL

    Directory of Open Access Journals (Sweden)

    L. F. Oliveira

    2018-02-01

    Full Text Available Diseases that occur in corn crops can cause great losses to farmers and consumers of its product and derivatives. So, was evaluated the sanity of maize grains in different genetic materials. The grains used were obtained from the crop of 2014/2015 on a farm in the city of Sorriso, State of Mato Grosso. For this, grain samples were collected from hybrids P3630H, 30F53YH, P2830H, and P3844H. The standard test ("Blotter Test" allowed noticing the incidence of Aspergillus sp., Fusarium sp. and Penicillium sp. Data were submitted to analysis of variance and Scott-Knott test at 5% probability. In treatments with the resistant genetic material the genus with the highest incidence was Penicillium sp. (82%, followed by Fusarium sp. (68.75% and Aspergillus sp. (15.25%. The hybrid with the lower incidence of Fusarium sp. was P2830H (59%. The hybrid with greater resistance to Aspergillus sp. and Penicillium sp. was P3844H (5 and 55%, respectively. The most susceptible hybrid to pathogens Aspergillus sp., Fusarium sp. and Penicillium sp. was 30F53YH (37, 79 and 94%, respectively. For the better sanitary quality of grains, based on the observed data, it is recommended to use the hybrid P2830H

  14. Genome-Wide Prediction of the Performance of Three-Way Hybrids in Barley

    Directory of Open Access Journals (Sweden)

    Zuo Li

    2017-03-01

    Full Text Available Predicting the grain yield performance of three-way hybrids is challenging. Three-way crosses are relevant for hybrid breeding in barley ( L. and maize ( L. adapted to East Africa. The main goal of our study was to implement and evaluate genome-wide prediction approaches of the performance of three-way hybrids using data of single-cross hybrids for a scenario in which parental lines of the three-way hybrids originate from three genetically distinct subpopulations. We extended the ridge regression best linear unbiased prediction (RRBLUP and devised a genomic selection model allowing for subpopulation-specific marker effects (GSA-RRBLUP: general and subpopulation-specific additive RRBLUP. Using an empirical barley data set, we showed that applying GSA-RRBLUP tripled the prediction ability of three-way hybrids from 0.095 to 0.308 compared with RRBLUP, modeling one additive effect for all three subpopulations. The experimental findings were further substantiated with computer simulations. Our results emphasize the potential of GSA-RRBLUP to improve genome-wide hybrid prediction of three-way hybrids for scenarios of genetically diverse parental populations. Because of the advantages of the GSA-RRBLUP model in dealing with hybrids from different parental populations, it may also be a promising approach to boost the prediction ability for hybrid breeding programs based on genetically diverse heterotic groups.

  15. Baseline sensitivity of lepidopteran corn pests in India to Cry1Ab insecticidal protein of Bacillus thuringiensis.

    Science.gov (United States)

    Jalali, Sushil K; Lalitha, Yadavalli; Kamath, Subray P; Mohan, Komarlingam S; Head, Graham P

    2010-08-01

    Genetically engineered corn (Bt corn) expressing Bacillus thuringiensis Berliner insecticidal protein Cry1Ab is a biotechnological option being considered for management of lepidopteran corn pests in India. As a resistance management practice it was essential to determine the sensitivity of multiple populations of the stalk borer Chilo partellus (Swinhoe), pink borer Sesamia inferens (Walker) and the cob borer Helicoverpa armigera (Hübner) to Cry1Ab protein through bioassays. The insect populations were collected during growing seasons of Rabi 2005 (October 2005 to February 2006) and Kharif 2006 (May to September 2006). Multiple populations of the three lepidopteran corn pests were found to be susceptible to Cry1Ab. Median lethal concentrations (LC(50)) ranged between 0.008 and 0.068 microg Cry1Ab mL(-1) diet for 18 populations of C. partellus (across two seasons), between 0.12 and 1.99 microg mL(-1) for seven populations of H. armigera and between 0.46 and 0.56 microg mL(-1) for two populations of S. inferens. Dose-response concentrations for lethality and growth inhibition have been determined to mark baseline sensitivity of multiple populations of key lepidopteran corn pests in India to Cry1Ab protein. These benchmark values will be referenced while monitoring resistance to Cry1Ab should Bt corn hybrids expressing Cry1Ab be approved for commercial cultivation in India. Copyright (c) 2010 Society of Chemical Industry.

  16. Yield trial of baby corn (Zea mays L. in Nakhon Si Thammarat, Phatthalung and Songkhla Provinces

    Directory of Open Access Journals (Sweden)

    Chushirt, T.

    2003-05-01

    Full Text Available Yield trial of 6 baby corn varieties, PSUSB 104, PSUSB 109, PSUSB 111, PSU-Syn 1, Pacific 444 and Chiang Mai 90 (check was done in Phatthalung, Songkhla and Nakhon Si Thammarat Provinces during 2000 - 2001. The experimental design in each environment was a randomized complete block with four replications. The results showed that the hybrid PSUSB 111 gaved the highest young ear weight of standard size (138 kg/rai, exceeding the mean yield of hybrid Pacific 444 by 27%, PSU-Syn 1 by 47% and open pollinated Chiang Mai 90 by 79%. The hybrid PSUSB 111 also showed other merits, such as more ears/plant, shorter days to first ear harvest, lower first ear height, less plant height and high plant fresh weight.

  17. 21 CFR 155.131 - Canned field corn.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Canned field corn. 155.131 Section 155.131 Food... Canned field corn. (a) Identity. (1) Canned field corn conforms to the definition and standard of... corn by § 155.130(a), except that the corn ingredient consists of succulent field corn or a mixture of...

  18. Evaluation of Spring Sweet Corn (Zea mays var saccharata Production in Different Planting Date under Plastic Cover in Gachsaran Province

    Directory of Open Access Journals (Sweden)

    H. Naraki,

    2012-08-01

    Full Text Available In order to evaluate the performance of spring sweet corn (Zea mays var saccharata at different planting dates under plastic cover, a split plot experiment based on RCBD with three replications was conducted in Gachsaran, in southwest of Iran, during 2009-2010 growing season. Four sweet corn hybrids (Merit, Challenger, Chase and Basin were used as main factor and five sowing date (15th and 25th Jan, 4th, 14th and 24th Feb as sub factor. The results showed that hybrid effect was significant on the days to tassel and ear emergence, days to harvest, ear harvest index, ear length, number of row per each ear, wet biological yield and 1000 grains weight, at 1%, and ear wet yield and grain yield harvest index at 5% probability levels. Also the effect of sowing date was significant on the days to tassel and ear emergence, days to harvest, ear wet yield, ear harvest index, ear diameter, ear length, biological yield, and 1000 grains weight at the 1% probability level. 'Basin' and 'Chase' hybrids were determined to have highest and lowest ear wet yield (17.09 and 15.13 t.ha-1 respectively. The highest and the lowest wet ear yield (16.81 and 15.06 t.ha-1 belonged to 15th Jan. and 24th Feb. respectively. 'Basin' hybrid and 'Challenger' with 8.39 and 7.59 t.ha-1 grain yield were found to be highest and lowest yields. The highest and the lowest grain yield (8.41 t.ha-1 7.45 t.ha-1 were recorded for 15th Jan. and 24th Feb. respectively.' Merit' and 'Chase' hybrids were determined to have longest and shortest days to ear harvest (94.3 and 86.2 days. Longest and shortest days to ear harvest (101.5 and 82 days were recorded in 4th Jan. and 24th Feb. Sowing date and hybrids interaction effects showed that the longest and shortest days to ear harvest (104.7 and 78.3 days were calculated in 4th Jan. of Merit and in 24th Feb. for Chase. Based on these results, it can be concluded that 'Basin' hybrid Feb. 24 is the most suitable cultivar to be produced in Gachsaran.

  19. Ethanol extraction of phytosterols from corn fiber

    Science.gov (United States)

    Abbas, Charles; Beery, Kyle E.; Binder, Thomas P.; Rammelsberg, Anne M.

    2010-11-16

    The present invention provides a process for extracting sterols from a high solids, thermochemically hydrolyzed corn fiber using ethanol as the extractant. The process includes obtaining a corn fiber slurry having a moisture content from about 20 weight percent to about 50 weight percent solids (high solids content), thermochemically processing the corn fiber slurry having high solids content of 20 to 50% to produce a hydrolyzed corn fiber slurry, dewatering the hydrolyzed corn fiber slurry to achieve a residual corn fiber having a moisture content from about 30 to 80 weight percent solids, washing the residual corn fiber, dewatering the washed, hydrolyzed corn fiber slurry to achieve a residual corn fiber having a moisture content from about 30 to 80 weight percent solids, and extracting the residual corn fiber with ethanol and separating at least one sterol.

  20. Composite Strain Hardening Properties of High Performance Hybrid Fibre Reinforced Concrete

    Directory of Open Access Journals (Sweden)

    Vikram Jothi Jayakumar

    2014-01-01

    Full Text Available Hybrid fibres addition in concrete proved to be a promising method to improve the composite mechanical properties of the cementitious system. Fibre combinations involving different fibre lengths and moduli were added in high strength slag based concrete to evaluate the strain hardening properties. Influence of hybrid fibres consisting of steel and polypropylene fibres added in slag based cementitious system (50% CRL was explored. Effects of hybrid fibre addition at optimum volume fraction of 2% of steel fibres and 0.5% of PP fibres (long and short steel fibre combinations were observed in improving the postcrack strength properties of concrete. Test results also indicated that the hybrid steel fibre additions in slag based concrete consisting of short steel and polypropylene (PP fibres exhibited a the highest compressive strength of 48.56 MPa. Comparative analysis on the performance of monofibre concrete consisting of steel and PP fibres had shown lower residual strength compared to hybrid fibre combinations. Hybrid fibres consisting of long steel-PP fibres potentially improved the absolute and residual toughness properties of concrete composite up to a maximum of 94.38% compared to monofibre concrete. In addition, the relative performance levels of different hybrid fibres in improving the matrix strain hardening, postcrack toughness, and residual strength capacity of slag based concretes were evaluated systematically.

  1. Market-oriented ethanol and corn-trade policies can reduce climate-induced US corn price volatility

    International Nuclear Information System (INIS)

    Verma, Monika; Diffenbaugh, Noah; Hertel, Thomas

    2014-01-01

    Agriculture is closely affected by climate. Over the past decade, biofuels have emerged as another important factor shaping the agricultural sector. We ask whether the presence of the US ethanol sector can play a role in moderating increases in US corn price variability, projected to occur in response to near-term global warming. Our findings suggest that the answer to this question depends heavily on the underlying forces shaping the ethanol industry. If mandate-driven, there is little doubt that the presence of the corn-ethanol sector will exacerbate price volatility. However, if market-driven, then the emergence of the corn-ethanol sector can be a double-edged sword for corn price volatility, possibly cushioning the impact of increased climate driven supply volatility, but also inheriting volatility from the newly integrated energy markets via crude oil price fluctuations. We find that empirically the former effect dominates, reducing price volatility by 27%. In contrast, mandates on ethanol production increase future price volatility by 54% in under future climate after 2020. We also consider the potential for liberalized international corn trade to cushion corn price volatility in the US. Our results suggest that allowing corn to move freely internationally serves to reduce the impact of near-term climate change on US corn price volatility by 8%. (letter)

  2. Market-oriented ethanol and corn-trade policies can reduce climate-induced US corn price volatility

    Science.gov (United States)

    Verma, Monika; Hertel, Thomas; Diffenbaugh, Noah

    2014-05-01

    Agriculture is closely affected by climate. Over the past decade, biofuels have emerged as another important factor shaping the agricultural sector. We ask whether the presence of the US ethanol sector can play a role in moderating increases in US corn price variability, projected to occur in response to near-term global warming. Our findings suggest that the answer to this question depends heavily on the underlying forces shaping the ethanol industry. If mandate-driven, there is little doubt that the presence of the corn-ethanol sector will exacerbate price volatility. However, if market-driven, then the emergence of the corn-ethanol sector can be a double-edged sword for corn price volatility, possibly cushioning the impact of increased climate driven supply volatility, but also inheriting volatility from the newly integrated energy markets via crude oil price fluctuations. We find that empirically the former effect dominates, reducing price volatility by 27%. In contrast, mandates on ethanol production increase future price volatility by 54% in under future climate after 2020. We also consider the potential for liberalized international corn trade to cushion corn price volatility in the US. Our results suggest that allowing corn to move freely internationally serves to reduce the impact of near-term climate change on US corn price volatility by 8%.

  3. Performance analysis of a photovoltaic-thermochemical hybrid system prototype

    International Nuclear Information System (INIS)

    Li, Wenjia; Ling, Yunyi; Liu, Xiangxin; Hao, Yong

    2017-01-01

    Highlights: •A modular photovoltaic-thermochemical hybrid system prototype is proposed. •Net solar-electric efficiency up to 41% is achievable. •Stable solar power supply is achievable via convenient energy storage. •The modular design facilitates the scalability of the hybrid system. -- Abstract: A solar photovoltaic (PV) thermochemical hybrid system consisting of a point-focus Fresnel concentrator, a PV cell and a methanol thermochemical reactor is proposed. In particular, a reactor capable of operating under high solar concentration is designed, manufactured and tested. Studies on both kinetic and thermodynamic characteristics of the reactor and the system are performed. Analysis of numerical and experimental results shows that with cascaded solar energy utilization and synergy among different forms of energy, the hybrid system has the advantages of high net solar-electric efficiency (up to 41%), stable solar energy power supply, solar energy storage (via syngas) and flexibility in application scale. The hybrid system proposed in this work provides a potential solution to some key challenges of current solar energy utilization technologies.

  4. Impact of recycling stillage on conversion of dilute sulfuric acid pretreated corn stover to ethanol.

    Science.gov (United States)

    Mohagheghi, Ali; Schell, Daniel J

    2010-04-01

    Both the current corn starch to ethanol industry and the emerging lignocellulosic biofuels industry view recycling of spent fermentation broth or stillage as a method to reduce fresh water use. The objective of this study was to understand the impact of recycling stillage on conversion of corn stover to ethanol. Sugars in a dilute-acid pretreated corn stover hydrolysate were fermented to ethanol by the glucose-xylose fermenting bacteria Zymomonas mobilis 8b. Three serial fermentations were performed at two different initial sugar concentrations using either 10% or 25% of the stillage as makeup water for the next fermentation in the series. Serial fermentations were performed to achieve near steady state concentration of inhibitors and other compounds in the corn stover hydrolysate. Little impact on ethanol yields was seen at sugar concentrations equivalent to pretreated corn stover slurry at 15% (w/w) with 10% recycle of the stillage. However, ethanol yields became progressively poorer as the sugar concentration increased and fraction of the stillage recycled increased. At an equivalent corn stover slurry concentration of 20% with 25% recycled stillage the ethanol yield was only 5%. For this microorganism with dilute-acid pretreated corn stover, recycling a large fraction of the stillage had a significant negative impact on fermentation performance. Although this finding is of concern for biochemical-based lignocellulose conversion processes, other microorganism/pretreatment technology combinations will likely perform differently. (c) 2009 Wiley Periodicals, Inc.

  5. Preparation of layered graphene and tungsten oxide hybrids for enhanced performance supercapacitors.

    Science.gov (United States)

    Xing, Ling-Li; Huang, Ke-Jing; Fang, Lin-Xia

    2016-11-01

    Tungsten oxide (WO 3 ), which was originally poor in capacitive performance, is made into an excellent electrode material for supercapacitors by dispersing it on graphene (Gr). The obtained Gr-WO 3 hybrids are characterized by X-ray diffraction, Raman spectroscopy, high-resolution transmission electron microscopy and scanning electron microscopy techniques, and evaluated as electrode materials for high-performance supercapacitors by cyclic voltammetry, galvanostatic charge-discharge curves and electrochemical impedance spectroscopy. A great improvement in specific capacitance is achieved with the present hybrids, from 255 F g -1 for WO 3 nanoparticles to 580 F g -1 for Gr-WO 3 hybrids (scanned at 1 A g -1 in 2 M KOH over a potential window of 0 to 0.45 V). The Gr-WO 3 hybrid exhibits an excellent high rate capability and good cycling stability with more than 92% capacitance retention over 1000 cycles at a current density of 5 A g -1 . The enhancement in supercapacitor performance of Gr-WO 3 is not only attributed to its unique nanostructure with large specific surface area, but also its excellent electro-conductivity, which facilitates efficient charge transport and promotes electrolyte diffusion. As a whole, this work indicates that Gr-WO 3 hybrids are a promising electrode material for high-performance supercapacitors.

  6. Subchronic toxicity study of corn silk with rats.

    Science.gov (United States)

    Wang, Cuina; Zhang, Tiehua; Liu, Jun; Lu, Shuang; Zhang, Cheng; Wang, Erlei; Wang, Zuozhao; Zhang, Yan; Liu, Jingbo

    2011-09-01

    Corn silk is a traditional herbal medicine in China, which has been used in many parts of the world for the treatment of edema as well as for cystitis, gout, kidney stones, nephritis, prostatitis and similar ailments. However, there is little scientific evidence about its safety. As a part of its safety assessment, a subchronic toxicity was performed in this paper. The subchronic toxicity was investigated in male and female Wistar rats by dietary administration at concentrations of 0.5%, 2.0% and 8.0% (w/w) for 90 days. Overall health, body weight, food consumption, hematology, blood chemistry, organ weights, gross and microscopic appearance of tissues were compared between test and control groups. A number of significant differences were seen between groups, but none of them was considered to be adverse. Based on the present study, the no-observed-adverse-effect level (NOAEL) of corn silk is at least 8.0% which corresponds to a mean daily corn silk intake of approximately 9.354 and 10.308 g/day/kg body weight for males and females, respectively. The results obtained in the present study suggest that consumption of corn silk has no adverse effects and support the safety of corn silk for humans. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  7. Performance measurements of hybrid PIN diode arrays

    International Nuclear Information System (INIS)

    Jernigan, J.G.; Arens, J.F.; Collins, T.; Herring, J.; Shapiro, S.L.; Wilburn, C.D.

    1990-05-01

    We report on the successful effort to develop hybrid PIN diode arrays and to demonstrate their potential as components of vertex detectors. Hybrid pixel arrays have been fabricated by the Hughes Aircraft Co. by bump bonding readout chips developed by Hughes to an array of PIN diodes manufactured by Micron Semiconductor Inc. These hybrid pixel arrays were constructed in two configurations. One array format having 10 x 64 pixels, each 120 μm square, and the other format having 256 x 256 pixels, each 30 μm square. In both cases, the thickness of the PIN diode layer is 300 μm. Measurements of detector performance show that excellent position resolution can be achieved by interpolation. By determining the centroid of the charge cloud which spreads charge into a number of neighboring pixels, a spatial resolution of a few microns has been attained. The noise has been measured to be about 300 electrons (rms) at room temperature, as expected from KTC and dark current considerations, yielding a signal-to-noise ratio of about 100 for minimum ionizing particles. 4 refs., 13 figs

  8. Performance Investigation of a Full-Scale Hybrid Composite Bull Gear

    Science.gov (United States)

    LaBerge, Kelsen; Handschuh, Robert; Roberts, Gary; Thorp, Scott

    2016-01-01

    Hybrid composite gears have been investigated as a weight saving technology for rotorcraft transmissions. These gears differ from conventional steel gears in that the structural material between the shaft interface and the gear rim is replaced with a lightweight carbon fiber composite. The work discussed here is an extension of previous coupon level hybrid gear tests to a full-scale bull gear. The NASA Glenn Research Center High-Speed Helical Gear Rig was modified for this program allowing several hybrid gear web configurations to be tested while utilizing the same gear rim. Testing was performed on both a baseline (steel) web configuration and a hybrid (steel-composite)configuration. Vibration, orbit and temperature data were recorded and compared between configurations. Vibration levels did not differ greatly between the hybrid and steel configurations, nor did temperature differential between inlet and outlet. While orbit shape displayed differences between the hybrid and baseline configurations, the general overall amplitude was comparable. The hybrid configuration discussed here successfully ran at 3300 hp(2,460 kW), however, progressive growth of the orbit while running at this test condition discontinued the test. Researchers continue to search for the cause of this orbit shift.

  9. Performance modeling of hybrid MPI/OpenMP scientific applications on large-scale multicore supercomputers

    KAUST Repository

    Wu, Xingfu; Taylor, Valerie

    2013-01-01

    In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore supercomputers: IBM POWER4, POWER5+ and BlueGene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks and Intel's MPI benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore supercomputers because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyrokinetic Toroidal Code (GTC) in magnetic fusion to validate our performance model of the hybrid application on these multicore supercomputers. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore supercomputers. © 2013 Elsevier Inc.

  10. Performance modeling of hybrid MPI/OpenMP scientific applications on large-scale multicore supercomputers

    KAUST Repository

    Wu, Xingfu

    2013-12-01

    In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore supercomputers: IBM POWER4, POWER5+ and BlueGene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks and Intel\\'s MPI benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore supercomputers because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyrokinetic Toroidal Code (GTC) in magnetic fusion to validate our performance model of the hybrid application on these multicore supercomputers. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore supercomputers. © 2013 Elsevier Inc.

  11. Densification characteristics of corn cobs

    Energy Technology Data Exchange (ETDEWEB)

    Kaliyan, Nalladurai; Morey, R. Vance [Department of Bioproducts and Biosystems Engineering, University of Minnesota, 1390 Eckles Avenue, St. Paul, MN 55108 (United States)

    2010-05-15

    Corn cobs are potential feedstocks for producing heat, power, fuels, and chemicals. Densification of corn cobs into briquettes/pellets would improve their bulk handling, transportation, and storage properties. In this study, densification characteristics of corn cobs were studied using a uniaxial piston-cylinder densification apparatus. With a maximum compression pressure of 150 MPa, effects of particle size (0.85 and 2.81 mm), moisture content (10 and 20% w.b.), and preheating temperature (25 and 85 C) on the density and durability of the corn cob briquettes (with diameter of about 19.0 mm) were studied. It was found that the durability (measured using ASABE tumbling can method) of corn cob briquettes made at 25 C was 0%. At both particle sizes, preheating of corn cob grinds with about 10% (w.b.) moisture content to 85 C produced briquettes with a unit density of > 1100 kg m{sup -3} and durability of about 90%. (author)

  12. Hybrid nanostructured materials for high-performance electrochemical capacitors

    KAUST Repository

    Yu, Guihua

    2013-03-01

    The exciting development of advanced nanostructured materials has driven the rapid growth of research in the field of electrochemical energy storage (EES) systems which are critical to a variety of applications ranging from portable consumer electronics, hybrid electric vehicles, to large industrial scale power and energy management. Owing to their capability to deliver high power performance and extremely long cycle life, electrochemical capacitors (ECs), one of the key EES systems, have attracted increasing attention in the recent years since they can complement or even replace batteries in the energy storage field, especially when high power delivery or uptake is needed. This review article describes the most recent progress in the development of nanostructured electrode materials for EC technology, with a particular focus on hybrid nanostructured materials that combine carbon based materials with pseudocapacitive metal oxides or conducting polymers for achieving high-performance ECs. This review starts with an overview of EES technologies and the comparison between various EES systems, followed by a brief description of energy storage mechanisms for different types of EC materials. This review emphasizes the exciting development of both hybrid nanomaterials and novel support structures for effective electrochemical utilization and high mass loading of active electrode materials, both of which have brought the energy density of ECs closer to that of batteries while still maintaining their characteristic high power density. Last, future research directions and the remaining challenges toward the rational design and synthesis of hybrid nanostructured electrode materials for next-generation ECs are discussed. © 2012 Elsevier Ltd.

  13. Effects of rumen-degradable protein:rumen-undegradable protein ratio and corn processing on production performance, nitrogen efficiency, and feeding behavior of Holstein dairy cows.

    Science.gov (United States)

    Savari, M; Khorvash, M; Amanlou, H; Ghorbani, G R; Ghasemi, E; Mirzaei, M

    2018-02-01

    This study was conducted to investigate the effects of the ratio of rumen-degradable protein (RDP) to rumen-undegradable protein (RUP) and corn processing method on production performance, nitrogen (N) efficiency, and feeding behavior of high-producing Holstein dairy cows. Twelve multiparous Holstein cows (second parity; milk yield = 48 ± 3 kg/d) were assigned to a replicated 4 × 4 Latin square design with a 2 × 2 factorial arrangement of treatments. Factor 1 was corn processing method [ground corn (GC) or steam flaked corn (SFC) with a flake density of about 390 g/L], and factor 2 was RDP:RUP ratio [low ratio (LR) = 60:40; high ratio (HR) = 65:35] based on crude protein (%). The crude protein concentrations were kept constant across the treatments (16.7% of DM). No significant interactions of main treatment effects occurred for lactation performance data. Cows fed 2 different RDP:RUP ratios exhibited similar dry matter intake (DMI), but those fed SFC showed decreased feed intake compared with those receiving GC (25.1 ± 0.48 vs. 26.2 ± 0.47 kg/d, respectively). Cows fed HR diets produced more milk than did those fed LR diets (44.4 ± 1.05 vs. 43.2 ± 1.05 kg/d, respectively). Milk fat content decreased but milk protein content increased in cows fed SFC compared with those fed GC. Feed efficiency (i.e., milk yield/DMI) was enhanced with increasing ratio of RDP:RUP (1.68 ± 0.04 vs. 1.74 ± 0.04 for LR and HR, respectively). Apparent N efficiency was higher in cows fed HR than in those fed LR (30.4 ± 0.61 vs. 29.2 ± 0.62, respectively). Compared with cows fed the GC-based diet, those receiving SFC exhibited lower values of N intake, N-NH 3 concentration, and fecal N excretion. Cows receiving SFC-based diets spent more time ruminating (min/kg of DMI) than did those fed GC. Although these results showed no interaction effects of RDP:RUP ratio and corn processing method on performance, higher RDP:RUP ratios and ground corn can be effective feeding strategies for

  14. 21 CFR 184.1865 - Corn syrup.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Corn syrup. 184.1865 Section 184.1865 Food and... Substances Affirmed as GRAS § 184.1865 Corn syrup. (a) Corn syrup, commonly called “glucose sirup” or “glucose syrup,” is obtained by partial hydrolysis of corn starch with safe and suitable acids or enzymes...

  15. Compatibility of High-Moisture Storage for Biochemical Conversion of Corn Stover: Storage Performance at Laboratory and Field Scales.

    Science.gov (United States)

    Wendt, Lynn M; Murphy, J Austin; Smith, William A; Robb, Thomas; Reed, David W; Ray, Allison E; Liang, Ling; He, Qian; Sun, Ning; Hoover, Amber N; Nguyen, Quang A

    2018-01-01

    Wet anaerobic storage of corn stover can provide a year-round supply of feedstock to biorefineries meanwhile serving an active management approach to reduce the risks associated with fire loss and microbial degradation. Wet logistics systems employ particle size reduction early in the supply chain through field-chopping which removes the dependency on drying corn stover prior to baling, expands the harvest window, and diminishes the biorefinery size reduction requirements. Over two harvest years, in-field forage chopping was capable of reducing over 60% of the corn stover to a particle size of 6 mm or less. Aerobic and anaerobic storage methods were evaluated for wet corn stover in 100 L laboratory reactors. Of the methods evaluated, traditional ensiling resulted in benefits for commercial corn stover supply, including particle size reduction during harvest, stability in storage, and compatibility with biochemical conversion of carbohydrates for biofuel production. Evaluation of the operational efficiencies and costs is suggested to quantify the potential benefits of a fully-wet biomass supply system to a commercial biorefinery.

  16. A high performance electrometer amplifier of hybrid design

    International Nuclear Information System (INIS)

    Rao, N.V.; Nazare, C.K.

    1979-01-01

    A high performance, reliable, electrometer amplifier of hybrid design for low current measurements in mass spectrometers has been developed. The short term instability with a 5 x 10 11 ohms input resistor is less than 1 x 10sup(-15) Amp. The drift is better than 1 mV/hour. The design steps are illustrated with a typical amplifier performance details. (auth.)

  17. Performance assessment of a Multi-fuel Hybrid Engine for Future Aircraft

    NARCIS (Netherlands)

    Yin, F.; Gangoli Rao, A.

    2016-01-01

    This paper presents performance assessment of the proposed hybrid engine concept using Liquid Natural Gas (LNG) and kerosene. The multi-fuel hybrid engine is a new engine concept integrated with contra rotating fans, sequential dual combustion chambers to facilitate “Energy Mix” in aviation and a

  18. Corn Drying with Zeolite in The Fluidized Bed Dryer under Medium Temperature

    Directory of Open Access Journals (Sweden)

    Mohamad Djaeni

    2013-08-01

    Full Text Available Drying is an important step to find high quality of corn. Based on Standard of National Industry, populer as SNI, number 01-3920-1995, the corn was well stored at moisture content 14% or below (wet basis. However, conventional corn drying dealed with in-efficient energy process and corn quality degradation. This research evaluated the performance of corn drying assisted by zeolite as moisture adsorbent. In this process, the zeolite and corn were placed in the dryer fluidized by warm air as drying medium under 40 - 50oC. The air evaporated water product from corn, and at same time the zeolite adsorbed moisture in air. So, the relative humidity of air in dryer can be kept low in which enhanced the driving force for drying. Beside that, the moisture adsoprtion by zeolite was exothermic process that can supply the energy for drying or keep the dryer temperature. Thus, the drying rate can be faster. This work foccussed to observe the effect of drying temperature, air velocity, and corn to zeolite ratio on drying time as well as corn quality. As indicators, the drying rate was estimated and the proxymates content such as protein, fat, and carbohydrate content were analyzed. The results showed that compared with conventional fluidised bed dryer, corn drying with zeolite, can speed up drying time as well as improving the constant of drying rate. In addition, the corn proximate nutrition content can be well retained. At operating temperature 40oC, air velocity 9 m.s-1, and zeolite to corn ratio 1:2, the drying time can be 60 minutes shorter compared to that without zeolite.

  19. Fabrication and performance analysis of concentrated hybrid photovoltaic system

    Directory of Open Access Journals (Sweden)

    Murthy Krishna

    2018-01-01

    Full Text Available Sun is the most important source of renewable source of energy. During the past few decades there has been an ever-increasing interest in Photovoltaic (PV cells as it directly converts solar radiation into electricity. This paper involves the performance study of photovoltaic system under concentrated solar radiation. The main problem with the concentration solar energy is the drastic increase in temperature of the photovoltaic module resulting in a decrease in performance efficiency of the system. This problem of overheating of the system can be overcome by providing cooling which would ensure operation of the module in the optimal temperature range. Hence, the setup would function as a hybrid model serving the dual purpose of power generation while also utilizing the waste heat for water heating applications. The experimental set up consist of a novel arrangement of concentrator and reflector and the cooling system. The Hybrid Photovoltaic System was repeatedly tested under real time conditions on several days. A comparison was drawn between the results obtained from direct exposure of a standard photovoltaic module to that obtained from the hybrid system in order to better understand the improvement in performance parameters. The study shown a significant improvement of output of standard photovoltaic module under the concentrated solar radiation.

  20. Type of corn and grinding degree in a concentrate supplied to suckling calves

    Directory of Open Access Journals (Sweden)

    Cibele Santos Ferreira

    2012-06-01

    Full Text Available The objective was to assess the effects of a concentrate consisting of two types of corn: flint and dent, with three different grinding degrees (1, 3 and 5 mm, as a function of intake, performance and digestibility of three crossbred dairy suckling heifers. A randomized block design involving 54 crossbred heifers in a 2 × 3 factorial arrangement was used to assess intake and performance patterns. In order to assess digestibility, the experimental design was completely randomized, consisting of 24 crossbred heifers. Weighting and measurements of height at withers and thoracic perimeter were performed. There was no significant interaction between grinding degree and corn type for any of the studied variables. The daily intake of concentrate dry matter was higher for flint corn (243 g/day as compared with dent corn (160 g/day. The grinding degree caused difference in the dry matter, crude protein and ether extract intake, with higher intake when 3 and 5 mm sieves were used in the process. There was no difference regarding average daily gain and increased withers, croup and thoracic perimeter. Likewise, feed conversion did not differ. Regarding dry matter digestibility, there was an effect resulting from the hardness of corn (78.9% for dent, and 84.3% and for flint corn. As for the grinding degree, the highest value of dry matter digestibility was found when using 5 mm sieves (84.2%, whereas the percentage values found for 1 mm and 3 mm mesh sieves were 79.1% and 78.1%, respectively. It is recommended that heifer calves in the early stage of growth be fed flint corn ground through 3 or 5 mm mesh sieves.

  1. Millet and corn oil in sorghum-based diets for broilers

    Directory of Open Access Journals (Sweden)

    João Paulo Rodrigues Bueno

    2015-12-01

    Full Text Available ABSTRACT: This study evaluated the effects of millet and corn oil additions to sorghum-based diets on the performance, carcass yields and prime cuts (i.e., wings, breasts, thighs and drumsticks and the relative weights of edible offal (i.e., gizzard, heart, and liver of broiler chickens. A total of 684 Hubbard Flex chickens, including 342 broilers of each sex, were housed. The design was completely randomized, and the following diets were supplied: A sorghum and soybean meal + soybean oil (control; B sorghum and soybean meal + corn oil; and C sorghum and soybean meal + millet and soybean oil. Six replicates with 38 birds each (19 males and 19 females were evaluated regarding each experimental diet. At 14, 21, 35 and 42 days of age, the feed intake, weight gain, feed conversion and viability of the chickens were evaluated. At 42 days, the live weight, carcass yield, prime cuts and relative weight of the edible offal were measured. The dietary inclusion of either millet or corn oil did not affect any of the parameters. In conclusion, additions of millet and corn oil to sorghum-based diets of broilers do not compromise poultry performance.

  2. Biodiesel production from corn oil by transesterification process

    International Nuclear Information System (INIS)

    Khan, N.A.; Dessouky, H.

    2009-01-01

    There is much political demand and economic pressure to convert agricultural surpluses into material, such as motor fuel, in which the world is deficient. Transport industry is primary consumer of crude oil. Due to scarcity of known petroleum reserves, the possible alternative fuel for use in present engine technology is biofuels. Europe, USA and Brazil are successfully using biofuels. Biofuels causes less environmental pollution as compared to normal petro fuels. As a fuel, ethanol (gasohol) is used in internal combustion engine while methyester (Biodiesel) is used in diesel engines with same or better performance as compared to petro fuels. Corn is very valuable crop with numerous industrial applications, and is used in more than 300 modern industries, including the manufacture of textiles, paper, adhesives, insecticides, paints, soaps, explosives and many more. Presently the biggest source of ethanol production is from corn (produced by USA). Edible oil can also be extracted from corn which is normally used for cooking and it can be used for biodiesel production. Many countries are experimenting on fats and oil to get feasible data for production of biodiesel. Presently USA prefer to use soybean oil as raw material for commercial production of biodiesel while in Europe rapeseed oil is preferred, so therefore, it depends upon the availability of raw material in particular area and may change from location to location. In Pakistan we started with corn oil to produce biodiesel by transesterification method. In present study different design parameters such as effect of temperature, catalyst concentration, molar ratio, and Stirrer speed were founded for better conversion of neat and used corn oil into biodiesel. The optimum parameters proposed for neat corn oil are 0.5% of catalyst based on weight of corn oil, temperature between 50 deg. C to 60 deg. C, reaction time 15 minutes, molar ratio of 6:1 and speed of stirrer 155 rpm. In case of used corn oil high catalyst

  3. 7 CFR 810.401 - Definition of corn.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of corn. 810.401 Section 810.401... GRAIN United States Standards for Corn Terms Defined § 810.401 Definition of corn. Grain that consists of 50 percent or more of whole kernels of shelled dent corn and/or shelled flint corn (Zea mays L...

  4. Agronomic traits and chemical composition of single hybrids of sweet corn Caracteres agronômicos e composição química de híbridos simples de milho doce

    Directory of Open Access Journals (Sweden)

    Angela Kwiatkowski

    2011-12-01

    Full Text Available In Brazil, the greengrocery market of sweet corn has been expanding along the country. In contrast, there have been few agri-industries canning sweet corn (Zea mays because of the lack of cultivars with agronomic characteristics proper to industrial purposes. The purpose of this study was to evaluate the general combining ability (GCA of seven inbred lines of sweet corn, and the specific combining ability (SCA of their hybrid combinations based on their agronomic traits, and the chemical composition of the grain. In the growing season 2006/2007, twenty-one single hybrids were evaluated in the Iguatemi Research Station, Maringá County, Northwestern Paraná, in Brazil using a complete randomized block design with four replications. Data were subjected to the analysis of variance and the genotypes were clustered by the Scott-Knott test. We estimated the GCA and SCA effects using the Griffing's method IV with the fixed model for plant height (PH, height of ear (EH, dehusked ears yield (DEY, reducing (RS and total sugars (TS, starch (ST, proteins (PTN, ether extract (EE and fibers (FB. The inbred line L4, which was originated from the 'Doce de Cuba', had the best GCA for crop yield and grain quality and therefore should be used in the next hybrid combinations. The hybrids L4xL5 and L3xL7 were the most promising with regard to crop yield and grain quality.No Brasil, poucas indústrias envazam o milho doce (Zea mays por causa da falta de cultivares para o processamento industrial. Em compensação, o mercado de milho verde doce aumentou. O objetivo deste estudo foi avaliar a capacidade geral de combinação (CGC de sete linhagens de milho doce e da capacidade específica de combinação (CEC das combinações híbridas, com base em características agronômicas e composição química dos grãos. Os vinte e um híbridos simples foram avaliados em blocos casualizados, com quatro repetições, durante o ano agrícola 2006/2007, no distrito de Iguatemi

  5. 21 CFR 184.1262 - Corn silk and corn silk extract.

    Science.gov (United States)

    2010-04-01

    ... specific limitations: Category of food Maximum level of use in food (as served) 1 Functional use Baked... chapter 10 Do. Soft candy, § 170.3(n)(38) of this chapter 20 Do. All other food categories 4 Do. 1 Parts... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Corn silk and corn silk extract. 184.1262 Section...

  6. Analyzing the performance index for a hybrid electric vehicle

    NARCIS (Netherlands)

    Ngo, D. V.; Hofman, T.; Steinbuch, M.; Serrarens, A. F A

    2011-01-01

    The definition of a performance index for the optimization design and optimal control problem of a Hybrid Electric Vehicle is not often considered and analyzed explicitly. In literature, there is no study about proposing a method of building or evaluating whether a performance index is appropriate.

  7. 21 CFR 137.275 - Yellow corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Yellow corn meal. 137.275 Section 137.275 Food and... Related Products § 137.275 Yellow corn meal. Yellow corn meal conforms to the definition and standard of identity prescribed by § 137.250 for white corn meal except that cleaned yellow corn is used instead of...

  8. 21 CFR 137.215 - Yellow corn flour.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Yellow corn flour. 137.215 Section 137.215 Food... Flours and Related Products § 137.215 Yellow corn flour. Yellow corn flour conforms to the definition and standard of identity prescribed by § 137.211 for white corn flour except that cleaned yellow corn is used...

  9. Experimental co-digestion of corn stalk and vermicompost to improve biogas production

    International Nuclear Information System (INIS)

    Chen Guangyin; Zheng Zheng; Yang Shiguan; Fang Caixia; Zou Xingxing; Luo Yan

    2010-01-01

    Anaerobic co-digestion of corn stalk and vermicompost (VC) as well as mono-digestion of corn stalk were investigated. Batch mono-digestion experiments were performed at 35 ± 1 o C and initial total solid loading (TSL) ranged from 1.2% to 6.0%. Batch co-digestion experiments were performed at 35 ± 1 o C and initial TSL of 6% with VC proportions ranged from 20% to 80% of total solid (TS). For mono-digestion of corn stalk, a maximum methane yield of 217.60 ± 13.87 mL/g TS added was obtained at initial TSL of 4.8%, and acidification was found at initial TSL of 6.0% with the lowest pH value of 5.10 on day 4. Co-digestion improved the methane yields by 4.42-58.61% via enhancing volatile fatty acids (VFAs) concentration and pH value compared with mono-digestion of corn stalk. The maximum biogas yield of 410.30 ± 11.01 mL/g TS added and methane yield of 259.35 ± 13.85 mL/g TS added were obtained for 40% VC addition. Structure analysis by X-ray diffractometry (XRD) showed that the lowest crystallinity of 35.04 of digested corn stalk was obtained from co-digestion with 40% VC, which decreased 29.4% compared to 49.6 obtained from un-treated corn stalk. It is concluded that co-digestion with VC is beneficial for improving biodigestibility and methane yield from corn stalk.

  10. The influence of choice feeding and cereal type (corn or triticale) during the finishing period on performance of mule ducks.

    Science.gov (United States)

    Arroyo, J; Fortun-Lamothe, L; Dubois, J P; Lavigne, F; Bijja, M; Molette, C

    2014-09-01

    The aim of this trial was to study the influence of choice feeding and cereal type (corn or triticale) during the finishing period on performance of ducks. In total, 624 one-day-old male mule ducks (Cairina moschata × Anas platyrhynchos) were divided into 3 groups differing in the diet they received between 56 and 84 d of age: a commercial complete pelleted diet (control group; AMEn 12.1 MJ/kg, CP 15%), or corn whole seeds (AMEn 14.4 MJ/kg, CP 7.3%) and protein-rich pellets (AMEn 9.9 MJ/kg, CP 22.7%) in 2 separated feeders [choice feeding with corn (CFC) group]; or triticale whole seeds (AMEn 13.0 MJ/kg, CP 10.5%) and protein-rich pellets (AMEn 11.2 MJ/kg, CP 19.5%) in 2 separated feeders [choice feeding with triticale (CFT) group]. From 85 to 96 d, 96 birds/group were overfed with corn. Feed intake (complete pellets or cereal and protein-rich pellets) per pen was measured at 60, 62, 65, 69, 78, and 84 d of age. Body weight and body traits were measured at 56 to 84 d of age. Over the entire period, from 56 to 84 d, the feed intake of the CFC group was 7% lower than the control group, and 5% lower than that in the CFT group (P = 0.002). Whatever the diet tested, at 56 and 84 d of age, the BW (4,099 and 4,779 g, P = 0.42 and P = 0.35, respectively) and the carcass traits (P > 0.05) of ducks were similar in the 3 groups. During and after overfeeding, the performances of the ducks were also similar (P > 0.05). The present results suggest that CFC during the finishing period is a solution to reduce the cost of diet destined to ducks. Indeed, using locally grown grains could reduce the economic and environmental impacts of duck feeding, reducing the transportation and crushing processes. © 2014 Poultry Science Association Inc.

  11. Deposition of insecticides on corn silks applied at high and low spray rates for control of corn earworm

    Science.gov (United States)

    Corn earworm is a major pest of sweet corn, especially when grown organically. Aerial application of insecticides is important for both conventionally- and organically-grown sweet corn production as sweet corn is frequently irrigated to assure return on investment given the high production costs. ...

  12. Total environmental impacts of biofuels from corn stover using a hybrid life cycle assessment model combining process life cycle assessment and economic input-output life cycle assessment.

    Science.gov (United States)

    Liu, Changqi; Huang, Yaji; Wang, Xinye; Tai, Yang; Liu, Lingqin; Liu, Hao

    2018-01-01

    Studies on the environmental analysis of biofuels by fast pyrolysis and hydroprocessing (BFPH) have so far focused only on the environmental impacts from direct emissions and have included few indirect emissions. The influence of ignoring some indirect emissions on the environmental performance of BFPH has not been well investigated and hence is not really understood. In addition, in order to avoid shifting environmental problems from one medium to another, a comprehensive assessment of environmental impacts caused by the processes must quantify the environmental emissions to all media (air, water, and land) in relation to each life cycle stage. A well-to-wheels assessment of the total environmental impacts resulting from direct emissions and indirect emissions of a BFPH system with corn stover is conducted using a hybrid life cycle assessment (LCA) model combining the economic input-output LCA and the process LCA. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) has been used to estimate the environmental impacts in terms of acidification, eutrophication, global climate change, ozone depletion, human health criteria, photochemical smog formation, ecotoxicity, human health cancer, and human health noncancer caused by 1 MJ biofuel production. Taking account of all the indirect greenhouse gas (GHG) emissions, the net GHG emissions (81.8 g CO 2 eq/MJ) of the biofuels are still less than those of petroleum-based fuels (94 g CO 2 eq/MJ). Maize production and pyrolysis and hydroprocessing make major contributions to all impact categories except the human health criteria. All impact categories resulting from indirect emissions except eutrophication and smog air make more than 24% contribution to the total environmental impacts. Therefore, the indirect emissions are important and cannot be ignored. Sensitivity analysis has shown that corn stover yield and bio-oil yield affect the total environmental impacts of the biofuels

  13. Relationship between Aflatoxin Contamination and Physiological Responses of Corn Plants under Drought and Heat Stress

    Directory of Open Access Journals (Sweden)

    Nacer Bellaloui

    2012-11-01

    Full Text Available Increased aflatoxin contamination in corn by the fungus Aspergillus flavus is associated with frequent periods of drought and heat stress during the reproductive stages of the plants. The objective of this study was to evaluate the relationship between aflatoxin contamination and physiological responses of corn plants under drought and heat stress. The study was conducted in Stoneville, MS, USA under irrigated and non-irrigated conditions. Five commercial hybrids, P31G70, P33F87, P32B34, P31B13 and DKC63-42 and two inbred germplasm lines, PI 639055 and PI 489361, were evaluated. The plants were inoculated with Aspergillus flavus (K-54 at mid-silk stage, and aflatoxin contamination was determined on the kernels at harvest. Several physiological measurements which are indicators of stress response were determined. The results suggested that PI 639055, PI 489361 and hybrid DKC63-42 were more sensitive to drought and high temperature stress in the non-irrigated plots and P31G70 was the most tolerant among all the genotypes. Aflatoxin contamination was the highest in DKC63-42 and PI 489361 but significantly lower in P31G70. However, PI 639055, which is an aflatoxin resistant germplasm, had the lowest aflatoxin contamination, even though it was one of the most stressed genotypes. Possible reasons for these differences are discussed. These results suggested that the physiological responses were associated with the level of aflatoxin contamination in all the genotypes, except PI 639055. These and other physiological responses related to stress may help examine differences among corn genotypes in aflatoxin contamination.

  14. Relationship between aflatoxin contamination and physiological responses of corn plants under drought and heat stress.

    Science.gov (United States)

    Kebede, Hirut; Abbas, Hamed K; Fisher, Daniel K; Bellaloui, Nacer

    2012-11-20

    Increased aflatoxin contamination in corn by the fungus Aspergillus flavus is associated with frequent periods of drought and heat stress during the reproductive stages of the plants. The objective of this study was to evaluate the relationship between aflatoxin contamination and physiological responses of corn plants under drought and heat stress. The study was conducted in Stoneville, MS, USA under irrigated and non-irrigated conditions. Five commercial hybrids, P31G70, P33F87, P32B34, P31B13 and DKC63-42 and two inbred germplasm lines, PI 639055 and PI 489361, were evaluated. The plants were inoculated with Aspergillus flavus (K-54) at mid-silk stage, and aflatoxin contamination was determined on the kernels at harvest. Several physiological measurements which are indicators of stress response were determined. The results suggested that PI 639055, PI 489361 and hybrid DKC63-42 were more sensitive to drought and high temperature stress in the non-irrigated plots and P31G70 was the most tolerant among all the genotypes. Aflatoxin contamination was the highest in DKC63-42 and PI 489361 but significantly lower in P31G70. However, PI 639055, which is an aflatoxin resistant germplasm, had the lowest aflatoxin contamination, even though it was one of the most stressed genotypes. Possible reasons for these differences are discussed. These results suggested that the physiological responses were associated with the level of aflatoxin contamination in all the genotypes, except PI 639055. These and other physiological responses related to stress may help examine differences among corn genotypes in aflatoxin contamination.

  15. Sexual ornaments, body morphology, and swimming performance in naturally hybridizing swordtails (teleostei: xiphophorus.

    Directory of Open Access Journals (Sweden)

    James B Johnson

    Full Text Available Determining the costs of sexual ornaments is complicated by the fact that ornaments are often integrated with other, non-sexual traits, making it difficult to dissect the effect of ornaments independent of other aspects of the phenotype. Hybridization can produce reduced phenotypic integration, allowing one to evaluate performance across a broad range of multivariate trait values. Here we assess the relationship between morphology and performance in the swordtails Xiphophorus malinche and X. birchmanni, two naturally-hybridizing fish species that differ extensively in non-sexual as well as sexual traits. We took advantage of novel trait variation in hybrids to determine if sexual ornaments incur a cost in terms of locomotor ability. For both fast-start and endurance swimming, hybrids performed at least as well as the two parental species. The sexually-dimorphic sword did not impair swimming performance per se. Rather, the sword negatively affected performance only when paired with a sub-optimal body shape. Studies seeking to quantify the costs of ornaments should consider that covariance with non-sexual traits may create the spurious appearance of costs.

  16. On the Performance of RF-FSO Links with and without Hybrid ARQ

    KAUST Repository

    Makki, Behrooz; Svensson, Tommy; Eriksson, Thomas; Alouini, Mohamed-Slim

    2016-01-01

    This paper studies the performance of hybrid radiofrequency (RF) and free-space optical (FSO) links assuming perfect channel state information (CSI) at the receiver. Considering the cases with and without hybrid automatic repeat request (HARQ), we

  17. WHAT IS THE VALUE OF BT CORN?

    OpenAIRE

    Hurley, Terrance M.; Mitchell, Paul D.; Rice, Marlin E.

    2001-01-01

    A common perception is that the value of Bt corn arises from two components-Bt corn increases expected profit and reduces profit variability. This perception encourages farmers and the policy makers to add a risk benefit to estimates of the value of Bt corn to account for the variability reduction. However, a conceptual model generates a useful decomposition of the value of Bt corn and a condition determining the impact of Bt corn on profit variability. An empirical model finds that Bt corn i...

  18. 21 CFR 184.1857 - Corn sugar.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Corn sugar. 184.1857 Section 184.1857 Food and... Substances Affirmed as GRAS § 184.1857 Corn sugar. (a) Corn sugar (C6H12O6, CAS Reg. No. 50-99-7), commonly... monohydrate form and is produced by the complete hydrolysis of corn starch with safe and suitable acids or...

  19. THE CORN-EGG PRICE TRANSMISSION MECHANISM

    OpenAIRE

    Babula, Ronald A.; Bessler, David A.

    1990-01-01

    A vector autoregression (VAR) model of corn, farm egg, and retail egg prices is estimated and shocked with a corn price increase. Impulse responses in egg prices, t-statistics for the impulse responses, and decompositions of forecast error variance are presented. Analyses of results provide insights on the corn/egg price transmission mechanism and on how corn price shocks pulsate through the egg-related economy.

  20. Breeding for Increased Water Use Efficiency in Corn (Maize) Using a Low-altitude Unmanned Aircraft System

    Science.gov (United States)

    Shi, Y.; Veeranampalayam-Sivakumar, A. N.; Li, J.; Ge, Y.; Schnable, J. C.; Rodriguez, O.; Liang, Z.; Miao, C.

    2017-12-01

    Low-altitude aerial imagery collected by unmanned aircraft systems (UAS) at centimeter-level spatial resolution provides great potential to collect high throughput plant phenotyping (HTP) data and accelerate plant breeding. This study is focused on UAS-based HTP for breeding increased water use efficiency in corn in eastern Nebraska. The field trail is part of an effort by the Genomes to Fields consortium effort to grow and phenotype many of the same corn (maize) hybrids at approximately 40 locations across the United States and Canada in order to stimulate new research in crop modeling, the development of new plant phenotyping technologies and the identification of genetic loci that control the adaptation of specific corn (maize) lines to specific environments. It included approximately 250 maize hybrids primary generated using recently off patent material from major seed companies. These lines are the closest material to what farmers are growing today which can be legally used for research purposes and genotyped by the public sector. During the growing season, a hexacopter equipped with a multispectral and a RGB cameras was flown and used to image this 1-hectare field trial near Mead, NE. Sensor data from the UAS were correlated directly with grain yield, measured at the end of the growing season, and were also be used to quantify other traits of interest to breeders including flowering date, plant height, leaf orientation, canopy spectral, and stand count. The existing challenges of field data acquisition (to ensure data quality) and development of effective image processing algorithms (such as detecting corn tassels) will be discussed. The success of this study and others like it will speed up the process of phenotypic data collection, and provide more accurate and detailed trait data for plant biologists, plant breeders, and other agricultural scientists. Employing advanced UAS-based machine vision technologies in agricultural applications have the potential

  1. The Response of Grain Corn Genotypes to Drought and Determination of rought Tolerance Indices

    Directory of Open Access Journals (Sweden)

    M Golbashy

    2012-02-01

    Full Text Available Water deficit is one of the most common constraints to crop productivity in the world and Iran. In order to study effect of drought stress on morphologic traits, yield and yield components of 34 hybrids of corn, an experiment was carried out based of complete randomized block design with three replication under F.C. irrigation and drought stress in Khorasan Razavi Agricultural Research and Natural Resources Institute mashhad,Iran on 2010. Results of analysis of variance showed that in both conditions there are significant different between all hybrids for all traits. In this experiment drought tolerance indices as TOL, MP, GMP, SSI, STI, HARM and also Golden Mean (new index were calculated. Results of hybrid means comparison showed that in F.C. Irrigation condition S.C500 hybrid and in stress condition N.11 hybrid was better than others in yield trait (13/79 and 5/69, respectively. It seems that Harm, STI, MP and GMP indices have a similar ability to separate drought sensitive and tolerant genotypes. According to cluster analysis (UPGMA method based on stress tolerance and susceptibility indices and grain yield in both F.C. and stress conditions, hybrids were classified in three groups with low intra- and high extra-group similarities. In conclusion, it can be suggested that H11 and SC250 hybrids should be recommended in Mashhad Plain.

  2. Effect of storage time on the characteristics of corn and efficiency of its utilization in broiler chickens

    Directory of Open Access Journals (Sweden)

    Dafei Yin

    2017-09-01

    Full Text Available Corn is one of the staple food and feed ingredients in China, therefore its storage is of particular importance. Corn is typically stored for 2 or more years in national barns before it is sold as a food or feed ingredient. However, the effects of stored corn in national barns on the animal performance and nutrient utilization have not been investigated thus far. This study attempted to determine the effects of storage time on the chemical and physical characteristics of corn and its nutritional value, broiler growth performance, and meat quality. Corn grains used in the present study were stored for 4 different periods, from 2 to 5 yr, under the same conditions in a building at the Beijing National Grain Storage Facility. A total of 240 birds in Exp. 1 and 90 birds in Exp. 2 were used to compare the effects of storage time on the utilization of nutrients of corn, the performance, and meat quality of broilers. The content of starch, crude protein, amino acids, fatty acids, and test weight generally decreased with increasing storage time. Corn stored for over 4 yr showed decreased catalase (CAT and peroxidase (POD activities and increased fat acidity. Body weight gain (BWG and European production index (EPI of broilers from 0 to 3 wk tended to decrease linearly with storage time (0.05  0.05. The digestibility of histidine and arginine, and C18:2 and C18:3 changed quadratically with storage time (P < 0.05. Collectively, the results suggest that the use of corn stored for 4 yr in animal feed decreased the performance and meat quality of broilers. Fat acidity, CAT, and POD activities can be used as indexes for evaluating the storage quality of corn.

  3. PREDICTING THE EMERGENCE OF CORN ROOTWORM (Diabrotica virgifera virgifera LeConte IN ESTERN SLAVONIA

    Directory of Open Access Journals (Sweden)

    Dražen Đoić

    2009-12-01

    Full Text Available Corn (Zea mays L. is one of the most important field crops in Croatia, country as well as in the world. It is subjected to many pests, among which is corn rootworm. Corn rootworms (Diabrotica virgifera virgifera LeConte are economically significant pests of corn, especially at successive growing of corn or single culture growing. In our corn fields, corn rootworm was a pest since its first appearance in 1995, and more significant damages were detected in 2002. The monitoring of the corn rootworm population enables the development of more efficient models for predicting adult corn rootworm emergence and the control of these pests. The objective of this thesis is to determine the influence of row spacing to corn rootworm population, larval root damages and grain yield. Then, to develop models to predict adult corn rootworm emergence in Eastern Slavonia, based on accumulated degree-days for air temperature, and to determine optimum time for monitoring and for possible control of adult cron rootworms based on ovarian development of the gravid females. The researches were conducted in 2004 and in 2005 in Gunja and Soljani, with two sowing models, row spacing of 50 cm and 70 cm. Hybrid corn OSSK 552 was sown in four repetitions at both sites. Cages and pheromone traps were placed in order to estimate the first day of corn rootworm emergence (the biofix and to monitor the total population number. Predicting of the adult corn rootworm emergence was based on degree–days for air temperature from the biofix. In mid–July, evaluation of the larval damage was made according to the scale from 0–3. Ovarian development was determined by dissection of the gravid females, whereas the complete female gravidity and optimum time for scouting were determined based on degree–days accumulated from the biofix. The larval population was not significantly increased at the reduced row spacing. The number of the larvae per a plant was 24% higher on the average at 50

  4. Life history attributes of Indian meal moth (Lepidoptera: Pyralidae) and Angoumois grain moth (Lepidoptera: Gelechiidae) reared on transgenic corn kernels.

    Science.gov (United States)

    Sedlacek, J D; Komaravalli, S R; Hanley, A M; Price, B D; Davis, P M

    2001-04-01

    The Indian meal moth, Plodia interpunctella (Hübner), and Angoumois grain moth, Sitotroga cerealella (Olivier), are two globally distributed stored-grain pests. Laboratory experiments were conducted to examine the impact that corn (Zea mays L.) kernels (i.e., grain) of some Bacillus thuringiensis Berliner (Bt) corn hybrids containing CrylAb Bt delta-endotoxin have on life history attributes of Indian meal moth and Angoumois grain moth. Stored grain is at risk to damage from Indian meal moth and Angoumois grain moth; therefore, Bt corn may provide a means of protecting this commodity from damage. Thus, the objective of this research was to quantify the effects of transgenic corn seed containing CrylAb delta-endotoxin on Indian meal moth and Angoumois grain moth survival, fecundity, and duration of development. Experiments with Bt grain, non-Bt isolines, and non-Bt grain were conducted in environmental chambers at 27 +/- 1 degrees C and > or = 60% RH in continuous dark. Fifty eggs were placed in ventilated pint jars containing 170 g of cracked or whole corn for the Indian meal moth and Angoumois grain moth, respectively. Emergence and fecundity were observed for 5 wk. Emergence and fecundity of Indian meal moth and emergence of Angoumois grain moth were significantly lower for individuals reared on P33V08 and N6800Bt, MON 810 and Bt-11 transformed hybrids, respectively, than on their non-Bt transformed isolines. Longer developmental times were observed for Indian meal moth reared on P33V08 and N6800Bt than their non-Bt-transformed isolines. These results indicate that MON 810 and Bt-11 CrylAb delta-endotoxin-containing kernels reduce laboratory populations of Indian meal moth and Angoumois grain moth. Thus, storing Bt-transformed grain is a management tactic that warrants bin scale testing and may effectively reduce Indian meal moth and Angoumois grain moth populations in grain without application of synthetic chemicals or pesticides.

  5. Performance Modeling of Hybrid MPI/OpenMP Scientific Applications on Large-scale Multicore Cluster Systems

    KAUST Repository

    Wu, Xingfu; Taylor, Valerie

    2011-01-01

    In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore clusters: IBM POWER4, POWER5+ and Blue Gene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore clusters because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyro kinetic Toroidal Code in magnetic fusion to validate our performance model of the hybrid application on these multicore clusters. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore clusters. © 2011 IEEE.

  6. Performance Modeling of Hybrid MPI/OpenMP Scientific Applications on Large-scale Multicore Cluster Systems

    KAUST Repository

    Wu, Xingfu

    2011-08-01

    In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore clusters: IBM POWER4, POWER5+ and Blue Gene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore clusters because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyro kinetic Toroidal Code in magnetic fusion to validate our performance model of the hybrid application on these multicore clusters. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore clusters. © 2011 IEEE.

  7. In situ degrability of dry matter of sheep fed with corn silage with or without Bt gene

    Directory of Open Access Journals (Sweden)

    Camila Memari Trava

    2012-12-01

    Full Text Available Silage corn is a food widely used, composing the bulk of feed for ruminants, because its present high nutritional value. Since the release by CNTBio seeds of modified genetically corn, many of it began to use transgenic silage corn, which was inserted into genetic code the Bt (Bacillus thuringiensis gene that expresses a toxic protein to caterpillar pests of corn, so occurs the reduction of production costs and pesticide use. Due to rapid expansion of transgenic maize and your wide use in animal feed by producers, the aim of this study was to evaluate the degrability in situ in animal rumen, in order to estimate the nutritional value of silage corn with and without the Bt gene. The experiment was conducted at the Institute of Animal Science Nova Odessa-SP. Were used four rumen fistulated sheep housed in individual pens for 56 days, including four periods. The animals were fed with silage with two varieties of plant corn to silage - DKB and AG, and their isogenic counterparts with the Bt gene, comprising four treatments. The degradability determination of dry matter (DM digestibility of silage corn treatments was determined by means of nylon bag in situ. After removal, the bags were washed and incubated, then placed in forced-circulation at 55°C to constant weight to determine the DM concentration. Data from in situ degradation of DM was adjusted in the mathematical model proposed by Ørskov and McDonald (1979. For the degradability of DM, the fraction “a” showed the interaction (p <0.05, where the variety DKB do not showed difference (p> 0.05 for the gene insertion. For AG, showed a slight decrease (p <0.05 when compared to its isogenic counterpart with the gene (35.68% and 37.85% respectively, means that the Bt gene reduced the solubility of DM of this fraction for AG range. The fact of the variety AG with and without the gene have suffered lower solubility of DM when compared the DKB with and without the gene is due to the fact of being

  8. Fracionamento dos carboidratos e proteínas de silagens de milho, sorgo e girassol Fractionation of carbohydrate and protein of corn, sorghum and sunflower silages

    Directory of Open Access Journals (Sweden)

    Renius Mello

    2004-10-01

    Full Text Available O trabalho caracteriza e quantifica as frações dos carboidratos e proteínas de silagens de milho, sorgo e girassol, com a finalidade de disponibilizar dados bromatológicos que possibilitem maximizar o aproveitamento desses alimentos e otimizar o desempenho animal. Foram avaliados dois híbridos de milho (Zea mays, DKB-215 e DKB-344, dois híbridos de sorgo (Sorghum bicolor, Ambar e AG-2005 e dois híbridos de girassol (Helianthus annuus, Rumbosol e M-734. A silagem de girassol apresentou menor valor de carboidratos totais (CT e B2 (celulose e hemicelulose e maior de C (lignina e fibra associada à lignina. A silagem de milho apresentou maior valor de carboidratos não-fibrosos (CNF, A+B1 (açúcares solúveis + amido e pectina e de CT juntamente com a silagem de sorgo, enquanto a de sorgo apresentou maior valor de B2 em função da maior contribuição de colmo. Houve diferença entre híbridos dentro da cultura do girassol para CT, sendo que o Rumbosol obteve maior valor que o M-734, em razão da aptidão dos mesmos, forrageiro e granífero respectivamente. A silagem de girassol apresentou maior valor de proteína bruta (PB e de suas frações. Não foi observada diferença entre híbridos nos valores de PB e de suas frações.This work evaluates and characterizes the carbohydrates and proteins fractions of corn, sorghum and sunflower silages. The purpose was to supply composition data that make it possible to maximize use of foods and optimize animal performance. Two corn (Zea mays hybrids, DKB-215 and DKB-344; sorghum (Sorghum bicolor hybrids, Ambar and AG-2005; and sunflower (Helianthus annuus hybrids, Rumbosol and M-734; were evaluated. Sunflower silage showed the lowest total carbohydrates (TC and B2 (cellulose and hemicelluloses values and the highest content of C (lignin and fiber associated lignin. Corn silages showed higher non-fiber carbohydrates (NFC, A+B1 (soluble sugars + starch and pectin and TC together sorghum silage while

  9. Investigating the Alometric Relationships between Leaf Area and Some of Vegetative Characteristics in SC704 Corn Hybrid

    Directory of Open Access Journals (Sweden)

    E Zeinali

    2016-10-01

    Full Text Available Introduction Since the leaves are the main source of production of photosynthetic substances in plants, dry matter production and crop yield potential is largely dependent on the leaf surface, and many environmental changes affect growth and yield through changes in leaf area. Hence, green leaf area per plant and leaf area index is measured in almost all studies of crop physiology to understand the mechanism of yield alteration. However, measurement of leaf area compared with the other traits such as plant height and total plant dry weight is very difficult, need to precision instruments and spend more time and cost. Therefore, according to the allometric relationships in plants, extensive studies were done to find the relationship between leaf area and the other plant traits that their measurement is easier, faster and cheaper, and does not require expensive equipment. Using these relationships will be used to estimate plant leaf area with acceptable accuracy without measuring. Plant traits that have high correlation with leaf area and usually use to estimate the plant leaf area are the number of leaves or nodes per main stem, plant height, leaf dry weight and dry weight of vegetative parts of the plant. Allometric equations was used successfully to calculate leaf area for various crops such as cotton, wheat, chickpea, faba bean, peanuts, soybean and sweet sorghum. This study was conducted to obtain the allometric relationships between green leaf area (cm2 per plant with number of leaves or nodes per main stem, plant height, green leaf dry weight and dry weight of vegetative parts of the plant (gram per plant, and investigating the effect of plant density and planting date on these relationships in SC704 corn (Zea mays L. hybrid. Materials and Methods This study was conducted at Gorgan University of Agricultural Sciences and Natural Resources farm located at latitude 36 o 51’ N, longitude 54 o27’ E and altitude of 13 meters above sea level

  10. Farm-scale costs and returns for second generation bioenergy cropping systems in the US Corn Belt

    Science.gov (United States)

    Manatt, Robert K.; Hallam, Arne; Schulte, Lisa A.; Heaton, Emily A.; Gunther, Theo; Hall, Richard B.; Moore, Ken J.

    2013-09-01

    While grain crops are meeting much of the initial need for biofuels in the US, cellulosic or second generation (2G) materials are mandated to provide a growing portion of biofuel feedstocks. We sought to inform development of a 2G crop portfolio by assessing the profitability of novel cropping systems that potentially mitigate the negative effects of grain-based biofuel crops on food supply and environmental quality. We analyzed farm-gate costs and returns of five systems from an ongoing experiment in central Iowa, USA. The continuous corn cropping system was most profitable under current market conditions, followed by a corn-soybean rotation that incorporated triticale as a 2G cover crop every third year, and a corn-switchgrass system. A novel triticale-hybrid aspen intercropping system had the highest yields over the long term, but could only surpass the profitability of the continuous corn system when biomass prices exceeded foreseeable market values. A triticale/sorghum double cropping system was deemed unviable. We perceive three ways 2G crops could become more cost competitive with grain crops: by (1) boosting yields through substantially greater investment in research and development, (2) increasing demand through substantially greater and sustained investment in new markets, and (3) developing new schemes to compensate farmers for environmental benefits associated with 2G crops.

  11. Effect of ensiling time and exogenous protease addition to whole-plant corn silage of various hybrids, maturities, and chop lengths on nitrogen fractions and ruminal in vitro starch digestibility.

    Science.gov (United States)

    Ferraretto, L F; Crump, P M; Shaver, R D

    2015-12-01

    The objective of this study was to evaluate the effects of ensiling time and exogenous protease addition on soluble CP (% of CP), ammonia-N (% of N), and ruminal in vitro starch digestibility (ivSD) of whole-plant corn silage (WPCS) from 3 hybrids, 2 maturities, and 2 chop lengths. Samples from 3 nonisogenic hybrids [brown midrib containing the bm3 gene mutation (BM3), dual-purpose (DP), or floury-leafy (LFY)] at 2 harvest maturities [2/3 kernel milk line (early) or 7d later (late)] with 2 theoretical lengths of cut settings (0.64 or 1.95cm) on a forage harvester were collected at harvest, treated with or without exogenous protease, and ensiled in triplicate in vacuum heat-sealed plastic bags for 0, 30, 60, 120, and 240d. Thus, the experiment consisted of 120 treatments (3 hybrids × 2 maturities × 2 chop lengths × 2 protease treatments × 5 time points) and 360 mini-silos (3 replications per treatment). Vitreousness, measured by dissection on unfermented kernels on the day of harvest, averaged 66.8, 65.0, and 59.0% for BM3, DP, and LFY, respectively. A protease × maturity interaction was observed with protease increasing ivSD in late but not early maturity. Ensiling time × hybrid interactions were observed for ammonia-N and soluble CP concentrations with greater values for FLY than other hybrids only after 120d of ensiling. Ensiling time × hybrid or protease × hybrid interactions were not observed for ivSD. Measurements of ivSD were greatest for FLY and lowest for BM3. Length of the ensiling period did not attenuate negative effects of kernel vitreousness or maturity on ivSD in WPCS. Results suggest that the dosage of exogenous protease addition used in the present study may reduce but not overcome the negative effects of maturity on ivSD in WPCS. No interactions between chop length and ensiling time or exogenous protease addition were observed for ivSD. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  12. Comparative performance of precommercial cellulases hydrolyzing pretreated corn stover

    Science.gov (United States)

    2011-01-01

    Background Cellulases and related hydrolytic enzymes represent a key cost factor for biochemical conversion of cellulosic biomass feedstocks to sugars for biofuels and chemicals production. The US Department of Energy (DOE) is cost sharing projects to decrease the cost of enzymes for biomass saccharification. The performance of benchmark cellulase preparations produced by Danisco, DSM, Novozymes and Verenium to convert pretreated corn stover (PCS) cellulose to glucose was evaluated under common experimental conditions and is reported here in a non-attributed manner. Results Two hydrolysis modes were examined, enzymatic hydrolysis (EH) of PCS whole slurry or washed PCS solids at pH 5 and 50°C, and simultaneous saccharification and fermentation (SSF) of washed PCS solids at pH 5 and 38°C. Enzymes were dosed on a total protein mass basis, with protein quantified using both the bicinchoninic acid (BCA) assay and the Bradford assay. Substantial differences were observed in absolute cellulose to glucose conversion performance levels under the conditions tested. Higher cellulose conversion yields were obtained using washed solids compared to whole slurry, and estimated enzyme protein dosages required to achieve a particular cellulose conversion to glucose yield were extremely dependent on the protein assay used. All four enzyme systems achieved glucose yields of 90% of theoretical or higher in SSF mode. Glucose yields were reduced in EH mode, with all enzymes achieving glucose yields of at least 85% of theoretical on washed PCS solids and 75% in PCS whole slurry. One of the enzyme systems ('enzyme B') exhibited the best overall performance. However in attaining high conversion yields at lower total enzyme protein loadings, the relative and rank ordered performance of the enzyme systems varied significantly depending upon which hydrolysis mode and protein assay were used as the basis for comparison. Conclusions This study provides extensive information about the

  13. Comparative performance of precommercial cellulases hydrolyzing pretreated corn stover

    Directory of Open Access Journals (Sweden)

    Mohagheghi Ali

    2011-09-01

    Full Text Available Abstract Background Cellulases and related hydrolytic enzymes represent a key cost factor for biochemical conversion of cellulosic biomass feedstocks to sugars for biofuels and chemicals production. The US Department of Energy (DOE is cost sharing projects to decrease the cost of enzymes for biomass saccharification. The performance of benchmark cellulase preparations produced by Danisco, DSM, Novozymes and Verenium to convert pretreated corn stover (PCS cellulose to glucose was evaluated under common experimental conditions and is reported here in a non-attributed manner. Results Two hydrolysis modes were examined, enzymatic hydrolysis (EH of PCS whole slurry or washed PCS solids at pH 5 and 50°C, and simultaneous saccharification and fermentation (SSF of washed PCS solids at pH 5 and 38°C. Enzymes were dosed on a total protein mass basis, with protein quantified using both the bicinchoninic acid (BCA assay and the Bradford assay. Substantial differences were observed in absolute cellulose to glucose conversion performance levels under the conditions tested. Higher cellulose conversion yields were obtained using washed solids compared to whole slurry, and estimated enzyme protein dosages required to achieve a particular cellulose conversion to glucose yield were extremely dependent on the protein assay used. All four enzyme systems achieved glucose yields of 90% of theoretical or higher in SSF mode. Glucose yields were reduced in EH mode, with all enzymes achieving glucose yields of at least 85% of theoretical on washed PCS solids and 75% in PCS whole slurry. One of the enzyme systems ('enzyme B' exhibited the best overall performance. However in attaining high conversion yields at lower total enzyme protein loadings, the relative and rank ordered performance of the enzyme systems varied significantly depending upon which hydrolysis mode and protein assay were used as the basis for comparison. Conclusions This study provides extensive

  14. Lifecycle performance. Special issue on management and maintenance, hybrid ventilation concepts, installation-low buildings; Lifecycle performance. Themanummer over beheer en onderhoud, hybride ventilatieconcepten, installatie-arme gebouwen

    Energy Technology Data Exchange (ETDEWEB)

    Thierauf, I. [Universiteit Utrecht, Utrecht (Netherlands); Kurvers, S.R.; Van den Ham, E.R.; Leijten, J.L. [Sectie Climate Design and Sustainability, Afdeling Architectural Engineering and Technology, Faculteit Bouwkunde, Technische Universiteit Delft TUD, Delft (Netherlands); Juricic, S. [Ecole National des Travaux Publics de l' Etat, Lyon (France); Jacobs, P. [Afdeling Energy and Comfort Systems, TNO, Delft (Netherlands); Versteeg, H. [LBP Sight, Nieuwegein (Netherlands); Van Loon, P.P.M. [Stichting Scholen van Morgen, Rotterdam (Netherlands); Hoek, H.C.; Van Eeden, H.; Nibbelink, J. [Collectief C-on, Haarlem (Netherlands); Veerman, J.; Maassen, W.H. [Royal Haskoning DHV, Nijmegen (Netherlands); Derksen, A.H.P. [ISSO, Rotterdam (Netherlands); Morren, K. [Universiteit Twente, Enschede (Netherlands)

    2012-12-15

    In 9 articles various aspects regarding the title topic are discussed: energy efficiency and user comfort, ventilation in new houses with balanced ventilation, the revised assessment for ventilation performance, air quality in school buildings, buildings with only a few installations, hybrid ventilation, the management and maintenance process, and future performance requirements [Dutch] In 9 artikelen wordt aandacht besteed aan diverse aspecten m.b.t. het titelonderwerp: energie-efficientie en gebruikerscomfort, ventilatie in nieuwbouwwoningen met balansventilatie, de herziene beoordelingsrichtlijn ventilatie prestatie, luchtkwaliteit in schoolgebouwen, installatie-arme gebouwen, hybride ventilatie, het beheer- en onderhoudsproces, en de toekomstige prestatie-eisen.

  15. Management of Western Corn Rootworm (Diabrotica virgifera virgifera

    Directory of Open Access Journals (Sweden)

    Ivan Sivčev

    2012-01-01

    Full Text Available Western corn rootworm (WCR was registered for the first time in Europe near the Surčininternational airport in Serbia in 1992. The spread of WCR on the territory of Serbia and itspopulation density increased fast. The Serbian territory was entirely populated in the followingfew years, while major damages occurred on corn grown for two or more years inthe same field. Data on damages caused to over 140,000 ha under corn until 1999 were collectedby organized monitoring. After 2000 and 2003, population abundance of D.v. virgifera,as well as the number of damaged corn fields, significantly decreased due to droughtand application of crop rotation. Corn rootworm has one generation per year. It overwintersin the egg stage. Under the climatic conditions of Serbia larvae hatching starts aroundMay 15th. The highest number of larvae on root is observed around June 20th when feedingis most intensive and plants become lodged as they lose roots. First adults emerge bythe end of June. Their abundance increases during July and reaches maximum by the endof the month. From the second decade of August the abundance decreases. Adults arepresent in the field until the first frosts. Larvae are much more harmful and significant thanadults. Larvae feed on roots or into roots by boring. Roots can be entirely destroyed underheavy attack and the host plants lodged already at the end of June. Under our climatic andagrotechnical conditions, adults are sporadic pests. Adults are a threat only when sowing isdone after the optimal sowing date or in case of stubble corn sowing.Crop rotation is an efficient and most widespread means of WCR control. No damageon corn grown in crop rotation has been registered in Serbia for now. In the first year of productioncorn does not require protection from Diabrotica virgifera virgifera LeConte larvae.Several insecticides have performed high efficacy by application at sowing and havebeen registered for commercial use. On the other hand, soil

  16. Corned Beef: an Enigmatic Irish Dish

    OpenAIRE

    Mac Con Iomaire, Máirtín; Gallagher, Pádraic Óg

    2011-01-01

    Corned beef and cabbage, which is consumed in America in large quantities each Saint Patrick’s Day (17th March), is considered by most Americans to be the ultimate Irish dish. However, corned beef and cabbage is seldom eaten in modern day Ireland. It is widely reported that Irish immigrants replaced their beloved bacon and cabbage with corned beef and cabbage when they arrived in America, drawing on the corned beef supplied by their neighbouring Jewish butchers, but not all commentators beli...

  17. 21 CFR 137.265 - Degerminated white corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Degerminated white corn meal. 137.265 Section 137... Cereal Flours and Related Products § 137.265 Degerminated white corn meal. (a) Degerminated white corn meal, degermed white corn meal, is the food prepared by grinding cleaned white corn and removing bran...

  18. Preparation and Characteristics of Corn Straw-Co-AMPS-Co-AA Superabsorbent Hydrogel

    Directory of Open Access Journals (Sweden)

    Wei-Min Cheng

    2015-11-01

    Full Text Available In this study, the corn straw after removing the lignin was grafted with 2-acrylamido-2-methylpropanesulfonic acid (AMPS to prepare sulfonated cellulose. The grafting copolymerization between the sulfonated cellulose and acrylic acid (AA was performed using potassium persulfate and N,N′-methylenebisacrylamide as the initiator and crosslinking agent, respectively, to prepare corn straw-co-AMPS-co-AA hydrogels. The structure and properties of the resulting hydrogels were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and dynamic rheometry. The effects of initiator, crosslinker, monomer neutralization degree, and temperature on the swelling ratio of the hydrogels were studied. The water retention, salt resistance, and recyclability of the corn straw-co-AMPS-co-AA hydrogels were also investigated. The optimum water absorptivity of the corn straw hydrogels was obtained at a polymerization temperature of 50 °C with 1.2% crosslinker, 1:7 ratio of the pretreated corn straw and AA, 2% initiator, and 50% neutralized AA.

  19. Outage Performance of Hybrid FSO/RF System with Low-Complexity Power Adaptation

    KAUST Repository

    Rakia, Tamer

    2016-02-26

    Hybrid free-space optical (FSO) / radio-frequency (RF) systems have emerged as a promising solution for high data- rate wireless communication systems. We consider truncated channel inversion based power adaptation strategy for coherent and non- coherent hybrid FSO/RF systems, employing an adaptive combining scheme. Specifically, we activate the RF link along with the FSO link when FSO link quality is unacceptable, and adaptively set RF transmission power to ensure constant combined signal-to-noise ratio at receiver terminal. Analytical expressions for the outage probability of the hybrid system with and without power adaptation are derived. Numerical examples show that, the hybrid FSO/RF systems with power adaptation achieve considerable outage performance improvement over conventional hybrid FSO/RF systems without power adaptation. © 2015 IEEE.

  20. Microscopic Analysis of Corn Fiber Using Corn Starch- and Cellulose-Specific Molecular Probes

    Energy Technology Data Exchange (ETDEWEB)

    Porter, S. E.; Donohoe, B. S.; Beery, K. E.; Xu, Q.; Ding, S.-Y.; Vinzant, T. B.; Abbas, C. A.; Himmel, M. E.

    2007-09-01

    Ethanol is the primary liquid transportation fuel produced from renewable feedstocks in the United States today. The majority of corn grain, the primary feedstock for ethanol production, has been historically processed in wet mills yielding products such as gluten feed, gluten meal, starch, and germ. Starch extracted from the grain is used to produce ethanol in saccharification and fermentation steps; however the extraction of starch is not 100% efficient. To better understand starch extraction during the wet milling process, we have developed fluorescent probes that can be used to visually localize starch and cellulose in samples using confocal microscopy. These probes are based on the binding specificities of two types of carbohydrate binding modules (CBMs), which are small substrate-specific protein domains derived from carbohydrate degrading enzymes. CBMs were fused, using molecular cloning techniques, to a green fluorescent protein (GFP) or to the red fluorescent protein DsRed (RFP). Using these engineered probes, we found that the binding of the starch-specific probe correlates with starch content in corn fiber samples. We also demonstrate that there is starch internally localized in the endosperm that may contribute to the high starch content in corn fiber. We also surprisingly found that the cellulose-specific probe did not bind to most corn fiber samples, but only to corn fiber that had been hydrolyzed using a thermochemical process that removes the residual starch and much of the hemicellulose. Our findings should be of interest to those working to increase the efficiency of the corn grain to ethanol process.

  1. Dynamic Performance Comparison for MPPT-PV Systems using Hybrid Pspice/Matlab Simulation

    Science.gov (United States)

    Aouchiche, N.; Becherif, M.; HadjArab, A.; Aitcheikh, M. S.; Ramadan, H. S.; Cheknane, A.

    2016-10-01

    The power generated by solar photovoltaic (PV) module depends on the surrounding irradiance and temperature. This paper presents a hybrid Matlab™/Pspice™ simulation model of PV system, combined with Cadence software SLPS. The hybridization is performed in order to gain the advantages of both simulation tools such as accuracy and efficiency in both Pspice electronic circuit and Matlab™ mathematical modelling respectively. For this purpose, the PV panel and the boost converter are developed using Pspice™ and hybridized with the mathematical Matlab™ model of maximum power point method controller (MPPT) through SLPS. The main objective is verify the significance of using the proposed hybrid simulation techniques in comparing the different MPPT algorithms such as the perturbation and observation (P&O), incremental of conductance (Inc-Cond) and counter reaction voltage using pilot cell (Pilot-Cell). Various simulations are performed under different atmospheric conditions in order to evaluate the dynamic behaviour for the system under study in terms of stability, efficiency and rapidity.

  2. Corn Culture: A Story of Intelligent Design

    Science.gov (United States)

    Todd, Jude

    2008-01-01

    Scientists are not sure of how corn was created. There were two competing genetic theories about how corn came to be. One theory maintains that corn had been teased out of a wheatlike grass called teosinte (genus Zea), and the other contends that one now-extinct ancestor of corn had crossed with another grass, "Tripsacum," several millennia ago.…

  3. Utilization of Different Corn Fractions by Broilers

    Directory of Open Access Journals (Sweden)

    SIFR Costa

    2015-09-01

    Full Text Available ABSTRACTThis study was conducted to evaluate the nutritional values of fractions of damaged corn. One hundred and eighty 22-d-old Cobb 500 male broilers were distributed in batteries according to a completely randomized design with six treatments of six replicates each. The treatments consisted of diets containing five corn fractions, classified as sound, fermented, insect-damaged, mold-damaged, or reference corn. The test diets consisted of 60% of reference diet + 40% of each corn fraction. Only the reference corn fraction included all the fractions at different proportions (0.8% fermented, 0.05% insect-damaged, 3.3% mold-damaged, and 95.85% sound grains. The method of total excreta collection was used to determine AMEn values and metabolizability coefficients of dry matter (MDM, crude protein (MCP, ether extract (MEE, and gross energy (MGE of the reference corn and its fractions. The density values of the corn fractions were used to calculate the correlations among the evaluated parameters. The evaluated corn fractions presented different compositions values. The insect-damaged and mold-damaged grains presented higher CP level, lower density, and MDM and MCP coefficients compared with the other fractions. However, calculated AMEn values were not significantly different (p>0.05 among corn fractions. A low correlation between density and AMEn content (r0.8 were calculated. Although the evaluated corn fractions presented different nutritional values, there were no marked differences in their utilization by broilers.

  4. Fumonisins B1 and B2 in the corn-milling process and corn-based products, and evaluation of estimated daily intake.

    Science.gov (United States)

    Savi, Geovana D; Piacentini, Karim C; Marchi, Djeini; Scussel, Vildes M

    2016-01-01

    The distribution of fumonisins (FBs: FB1 and FB2) in the corn-milling process and in corn-based products, as well as daily intake estimates for the Brazilian population were evaluated. Among corn fractions samples, corn meal had the highest mean concentration of FB1 (1305 µg kg(-1)) and FB2 (651 µg kg(-1)) and a distribution factors of 452% and 256% in relation to corn grain, respectively. On the other hand, the distribution factor of FB1 and FB2 in corn flour was found to be 144% and 88% respectively, which demonstrates that fumonisins in this fraction were reduced compared with corn grain. As a result, almost half the corn meal samples (47%) would be non-compliant with future Brazilian regulation (2017) for fumonisins. However, corn-based products, such as corn flakes and popcorn, were in compliance with the regulation. The average probable daily intake and maximum probable daily intake of fumonisins estimated for the Santa Catarina state (Brazil) population were below the provisional maximum tolerable daily intake of 2 µg kg(-1) body weight day(-1) for all corn samples. Despite this, the adoption of practices to control the occurrence of fumonisins should be applied to the corn-milling fractions that may contain a higher concentration of this toxin, such as corn meal, often used for animal feed in Brazil.

  5. High performance technique for database applicationsusing a hybrid GPU/CPU platform

    KAUST Repository

    Zidan, Mohammed A.

    2012-07-28

    Many database applications, such as sequence comparing, sequence searching, and sequence matching, etc, process large database sequences. we introduce a novel and efficient technique to improve the performance of database applica- tions by using a Hybrid GPU/CPU platform. In particular, our technique solves the problem of the low efficiency result- ing from running short-length sequences in a database on a GPU. To verify our technique, we applied it to the widely used Smith-Waterman algorithm. The experimental results show that our Hybrid GPU/CPU technique improves the average performance by a factor of 2.2, and improves the peak performance by a factor of 2.8 when compared to earlier implementations. Copyright © 2011 by ASME.

  6. Aspen Plus simulation of biomass integrated gasification combined cycle systems at corn ethanol plants

    International Nuclear Information System (INIS)

    Zheng, Huixiao; Kaliyan, Nalladurai; Morey, R. Vance

    2013-01-01

    Biomass integrated gasification combined cycle (BIGCC) systems and natural gas combined cycle (NGCC) systems are employed to provide heat and electricity to a 0.19 hm 3 y −1 (50 million gallon per year) corn ethanol plant using different fuels (syrup and corn stover, corn stover alone, and natural gas). Aspen Plus simulations of BIGCC/NGCC systems are performed to study effects of different fuels, gas turbine compression pressure, dryers (steam tube or superheated steam) for biomass fuels and ethanol co-products, and steam tube dryer exhaust treatment methods. The goal is to maximize electricity generation while meeting process heat needs of the plant. At fuel input rates of 110 MW, BIGCC systems with steam tube dryers provide 20–25 MW of power to the grid with system thermal efficiencies (net power generated plus process heat rate divided by fuel input rate) of 69–74%. NGCC systems with steam tube dryers provide 26–30 MW of power to the grid with system thermal efficiencies of 74–78%. BIGCC systems with superheated steam dryers provide 20–22 MW of power to the grid with system thermal efficiencies of 53–56%. The life-cycle greenhouse gas (GHG) emission reduction for conventional corn ethanol compared to gasoline is 39% for process heat with natural gas (grid electricity), 117% for BIGCC with syrup and corn stover fuel, 124% for BIGCC with corn stover fuel, and 93% for NGCC with natural gas fuel. These GHG emission estimates do not include indirect land use change effects. -- Highlights: •BIGCC and natural gas combined cycle systems at corn ethanol plants are simulated. •The best performance results in 25–30 MW power to grid. •The best performance results in 74–78% system thermal efficiencies. •GHG reduction for corn ethanol with BIGCC systems compared to gasoline is over 100%

  7. High-performance solid-state supercapacitors based on graphene-ZnO hybrid nanocomposites

    Science.gov (United States)

    Li, Zijiong; Zhou, Zhihua; Yun, Gaoqian; Shi, Kai; Lv, Xiaowei; Yang, Baocheng

    2013-11-01

    In this paper, we report a facile low-cost synthesis of the graphene-ZnO hybrid nanocomposites for solid-state supercapacitors. Structural analysis revealed a homogeneous distribution of ZnO nanorods that are inserted in graphene nanosheets, forming a sandwiched architecture. The material exhibited a high specific capacitance of 156 F g-1 at a scan rate of 5 mV.s-1. The fabricated solid-state supercapacitor device using these graphene-ZnO hybrid nanocomposites exhibits good supercapacitive performance and long-term cycle stability. The improved supercapacitance property of these materials could be ascribed to the increased conductivity of ZnO and better utilization of graphene. These results demonstrate the potential of the graphene-ZnO hybrid nanocomposites as an electrode in high-performance supercapacitors.

  8. 21 CFR 137.260 - Enriched corn meals.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Enriched corn meals. 137.260 Section 137.260 Food... Flours and Related Products § 137.260 Enriched corn meals. (a) Enriched corn meals are the foods, each of which conforms to the definition and standard of identity prescribed for a kind of corn meal by §§ 137...

  9. Performance analysis of hybrid photovoltaic/diesel energy system under Malaysian conditions

    International Nuclear Information System (INIS)

    Lau, K.Y.; Yousof, M.F.M.; Arshad, S.N.M.; Anwari, M.; Yatim, A.H.M.

    2010-01-01

    Standalone diesel generating system utilized in remote areas has long been practiced in Malaysia. Due to highly fluctuating diesel price, such a system is seemed to be uneconomical, especially in the long run if the supply of electricity for rural areas solely depends on such diesel generating system. This paper would analyze the potential use of hybrid photovoltaic (PV)/diesel energy system in remote locations. National Renewable Energy Laboratory's (NREL) HOMER software was used to perform the techno-economic feasibility of hybrid PV/diesel energy system. The investigation demonstrated the impact of PV penetration and battery storage on energy production, cost of energy and number of operational hours of diesel generators for the given hybrid configurations. Emphasis has also been placed on percentage fuel savings and reduction in carbon emissions of different hybrid systems. At the end of this paper, suitability of utilizing hybrid PV/diesel energy system over standalone diesel system would be discussed mainly based on different solar irradiances and diesel prices. (author)

  10. Enhanced performance hybrid-arq

    KAUST Repository

    Fareed, Muhammad Mehboob

    2016-06-16

    Apparatuses, computer readable media, and methods are provided for enhancing hybrid automatic repeat request (ARQ) performance. In an example method, a communication device transmits a first element of a vector, where the vector is selected using the information bits to be transmitted as an index in a code book. In some embodiments, this code book is constructed using Linear Constellation Precoding (LCP). If a NACK is received, the communication device transmits a second element of the vector. The process of transmitting elements of the vector continues until an ACK is received or the maximum number of transmission attempts is reached. If an ACK is received, the communication device transmits a first element of another vector of the code book that encodes a second set of information bits. This procedure may continue until all information bits have been transmitted successfully.

  11. Enhanced performance hybrid-arq

    KAUST Repository

    Fareed, Muhammad Mehboob; Yang, Hong-Chuan; Alouini, Mohamed-Slim

    2016-01-01

    Apparatuses, computer readable media, and methods are provided for enhancing hybrid automatic repeat request (ARQ) performance. In an example method, a communication device transmits a first element of a vector, where the vector is selected using the information bits to be transmitted as an index in a code book. In some embodiments, this code book is constructed using Linear Constellation Precoding (LCP). If a NACK is received, the communication device transmits a second element of the vector. The process of transmitting elements of the vector continues until an ACK is received or the maximum number of transmission attempts is reached. If an ACK is received, the communication device transmits a first element of another vector of the code book that encodes a second set of information bits. This procedure may continue until all information bits have been transmitted successfully.

  12. Pure versus hybrid: performance implications of Porter's generic strategies.

    Science.gov (United States)

    Kumar, K; Subramanian, R; Yauger, C

    1997-01-01

    This article identifies the strategic types in the hospital industry based on the hospital's use of Porter's generic strategies in their pure and hybrid forms. The article also examines differences in performance of hospitals across strategic types. Results indicate that hospitals that follow a focussed cost leadership strategy, in general, have superior performance on a variety of performance measures, while hospitals that use a combination of cost leadership and differentiation perform the poorest. Implications of findings for hospital administrators are also discussed.

  13. Fact sheet: Ethanol from corn

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-31

    This fact sheet is intended to provide an overview of the advantages of ethanol from corn, emphasizing ethanol`s contribution to environmental protection and sustainable agriculture. Ethanol, an alternative fuel used as an octane enhancer is produced through the conversion of starch to sugars by enzymes, and fermentation of these sugars to ethanol by yeast. The production process may involve wet milling or dry milling. Both these processes produce valuable by-products, in addition to ethanol and carbon dioxide. Ethanol contains about 32,000 BTU per litre. It is commonly believed that using state-of-the-art corn farming and corn processing processes, the amount of energy contained in ethanol and its by-products would be more than twice the energy required to grow and process corn into ethanol. Ethanol represents the third largest market for Ontario corn, after direct use as animal feed and wet milling for starch, corn sweetener and corn oil. The environmental consequences of using ethanol are very significant. It is estimated that a 10 per cent ethanol blend in gasoline would result in a 25 to 30 per cent decrease in carbon monoxide emissions, a 6 to 10 per cent decrease in net carbon dioxide, a slight increase in nitrous oxide emissions which, however, would still result in an overall decrease in ozone formation, since the significant reduction in carbon monoxide emissions would compensate for any slight increase in nitrous oxide. Volatile organic compounds emission would also decrease by about 7 per cent with a 10 per cent ethanol blend. High level blends could reduce VOCs production by as much as 30 per cent. 7 refs.

  14. Evaluating the impact of adding energy storage on the performance of a hybrid power system

    International Nuclear Information System (INIS)

    Jacobus, Headley; Lin, Baochuan; Jimmy, David Henry; Ansumana, Rashid; Malanoski, Anthony P.; Stenger, David

    2011-01-01

    Research highlights: → A photovoltaic-diesel hybrid power system is compared to a diesel-only system. → The efficiency, cost, generator runtime, and fuel consumption are calculated. → Overall efficiency of two systems is very similar. → Reduced operation and maintenance costs for hybrid system gave bigger cost savings. → The hybrid system is more advantageous in serving the same load. -- Abstract: Hybrid power systems have the capability to incorporate significant renewable energy penetration for a small autonomous system while still maintaining reliable grid stability. While there are many papers covering the optimization of component size and dispatch strategy, far fewer papers contain experimental performance data from hybrid systems. Mercy Hospital in Bo, Sierra Leone is converting their power system into a photovoltaic (PV)-diesel hybrid system, thus providing an opportunity to examine the change in system performance before, during, and after the conversion. Due to the seasonal availability of electric power in Sierra Leone, two datasets representing two distinct load profiles are analyzed: Wet Season and Dry Season. The difference in generation efficiency, cost per kW h, generator runtime, and fuel consumption are calculated between a diesel-only generation baseline and the recorded hybrid system performance. The results indicated that the hybrid system significantly reduces operation costs; approximately 37% less during Dry Season and 64% reduction in the Wet Season than a diesel-only generator serving the same load.

  15. THE IMPORTANCE OF WESTERN CORN ROOTWORM IN CONTINUOUS MAIZE

    Directory of Open Access Journals (Sweden)

    Marija Ivezić

    2006-06-01

    Full Text Available Western Corn Rootworm (Diabrotica virgifera virgifera LeConte is considered to be one of the most important and potentially most severe pest of maize worldwide. The pest was detected in Croatia for the first time in 1995. Since then it has been spread over all areas with maize production in Croatia. The economically most efficient and preventive control measure is crop rotation and growing maize hybrids that show tolerance to WCR. The trials were settled in the area near Dubosevica where in 2002 and 2003 the economic damages caused by WCR were up to 80%. The aim of this investigation is to determine damages on maize root caused by WCR and loss in grain yield on commercial maize hybrids in continuous farming. Pheromone traps, type Csal♀m♂N®, were used in order to monitor WCR population dynamics. In the period of two months, 366 WCR adult beetles in total were captured. Root damage was evaluated according to Iowa Node Injury Scale and grain yield was measured and corrected to 14% moisture. Furthermore, the plant lodging, as a consequence of larval feeding, was assessed. The results have shown that root damage for hybrid Bc 5982 was 1.15, and 0.73 damage was on Pr 35p 12 roots. The grain yield obtained from hybrid Bc 5982 was 11.7 t/ha, and Pr 35p 12 had 12.3 t/ha. Statistical analyses showed that there were no significant differences in root damage and losses in grain yield between the two investigated hybrids. Results of this investigation indicate that growing maize for 2 to 3 years in continuous farming, in the same field, would not cause economically significant loss in maize gain yield.

  16. Compatibility of High-Moisture Storage for Biochemical Conversion of Corn Stover: Storage Performance at Laboratory and Field Scales

    Science.gov (United States)

    Wendt, Lynn M.; Murphy, J. Austin; Smith, William A.; Robb, Thomas; Reed, David W.; Ray, Allison E.; Liang, Ling; He, Qian; Sun, Ning; Hoover, Amber N.; Nguyen, Quang A.

    2018-01-01

    Wet anaerobic storage of corn stover can provide a year-round supply of feedstock to biorefineries meanwhile serving an active management approach to reduce the risks associated with fire loss and microbial degradation. Wet logistics systems employ particle size reduction early in the supply chain through field-chopping which removes the dependency on drying corn stover prior to baling, expands the harvest window, and diminishes the biorefinery size reduction requirements. Over two harvest years, in-field forage chopping was capable of reducing over 60% of the corn stover to a particle size of 6 mm or less. Aerobic and anaerobic storage methods were evaluated for wet corn stover in 100 L laboratory reactors. Of the methods evaluated, traditional ensiling resulted in <6% total solid dry matter loss (DML), about five times less than the aerobic storage process and slightly less than half that of the anaerobic modified-Ritter pile method. To further demonstrate the effectiveness of the anaerobic storage, a field demonstration was completed with 272 dry tonnes of corn stover; DML averaged <5% after 6 months. Assessment of sugar release as a result of dilute acid or dilute alkaline pretreatment and subsequent enzymatic hydrolysis suggested that when anaerobic conditions were maintained in storage, sugar release was either similar to or greater than as-harvested material depending on the pretreatment chemistry used. This study demonstrates that wet logistics systems offer practical benefits for commercial corn stover supply, including particle size reduction during harvest, stability in storage, and compatibility with biochemical conversion of carbohydrates for biofuel production. Evaluation of the operational efficiencies and costs is suggested to quantify the potential benefits of a fully-wet biomass supply system to a commercial biorefinery. PMID:29632861

  17. Compatibility of High-Moisture Storage for Biochemical Conversion of Corn Stover: Storage Performance at Laboratory and Field Scales

    Directory of Open Access Journals (Sweden)

    Lynn M. Wendt

    2018-03-01

    Full Text Available Wet anaerobic storage of corn stover can provide a year-round supply of feedstock to biorefineries meanwhile serving an active management approach to reduce the risks associated with fire loss and microbial degradation. Wet logistics systems employ particle size reduction early in the supply chain through field-chopping which removes the dependency on drying corn stover prior to baling, expands the harvest window, and diminishes the biorefinery size reduction requirements. Over two harvest years, in-field forage chopping was capable of reducing over 60% of the corn stover to a particle size of 6 mm or less. Aerobic and anaerobic storage methods were evaluated for wet corn stover in 100 L laboratory reactors. Of the methods evaluated, traditional ensiling resulted in <6% total solid dry matter loss (DML, about five times less than the aerobic storage process and slightly less than half that of the anaerobic modified-Ritter pile method. To further demonstrate the effectiveness of the anaerobic storage, a field demonstration was completed with 272 dry tonnes of corn stover; DML averaged <5% after 6 months. Assessment of sugar release as a result of dilute acid or dilute alkaline pretreatment and subsequent enzymatic hydrolysis suggested that when anaerobic conditions were maintained in storage, sugar release was either similar to or greater than as-harvested material depending on the pretreatment chemistry used. This study demonstrates that wet logistics systems offer practical benefits for commercial corn stover supply, including particle size reduction during harvest, stability in storage, and compatibility with biochemical conversion of carbohydrates for biofuel production. Evaluation of the operational efficiencies and costs is suggested to quantify the potential benefits of a fully-wet biomass supply system to a commercial biorefinery.

  18. Sample Preparation of Corn Seed Tissue to Prevent Analyte Relocations for Mass Spectrometry Imaging

    Science.gov (United States)

    Kim, Shin Hye; Kim, Jeongkwon; Lee, Young Jin; Lee, Tae Geol; Yoon, Sohee

    2017-08-01

    Corn seed tissue sections were prepared by the tape support method using an adhesive tape, and mass spectrometry imaging (MSI) was performed. The effect of heat generated during sample preparation was investigated by time-of-flight secondary mass spectrometry (TOF-SIMS) imaging of corn seed tissue prepared by the tape support and the thaw-mounted methods. Unlike thaw-mounted sample preparation, the tape support method does not cause imaging distortion because of the absence of heat, which can cause migration of the analytes on the sample. By applying the tape-support method, the corn seed tissue was prepared without structural damage and MSI with accurate spatial information of analytes was successfully performed.

  19. Sample Preparation of Corn Seed Tissue to Prevent Analyte Relocations for Mass Spectrometry Imaging.

    Science.gov (United States)

    Kim, Shin Hye; Kim, Jeongkwon; Lee, Young Jin; Lee, Tae Geol; Yoon, Sohee

    2017-08-01

    Corn seed tissue sections were prepared by the tape support method using an adhesive tape, and mass spectrometry imaging (MSI) was performed. The effect of heat generated during sample preparation was investigated by time-of-flight secondary mass spectrometry (TOF-SIMS) imaging of corn seed tissue prepared by the tape support and the thaw-mounted methods. Unlike thaw-mounted sample preparation, the tape support method does not cause imaging distortion because of the absence of heat, which can cause migration of the analytes on the sample. By applying the tape-support method, the corn seed tissue was prepared without structural damage and MSI with accurate spatial information of analytes was successfully performed. Graphical Abstract ᅟ.

  20. The Phenotypic Performances of Gerbera Local Bali X Rubby Red Hybrids

    Directory of Open Access Journals (Sweden)

    Kurnia Yuniarto

    2018-02-01

    Full Text Available Gerbera is one of important cut flowers in floriculture industries. It can substitute of chrysanthemum. The novelty of cultivar and superiority of characteristic of gerbera are necessary in the floriculture markets. New cultivars can be created through hybridization between cultivars. This study aimed to find out the phenotypic performances of gerbera hybrids of Local Bali x Rubby Red. The research was conducted in Indonesian Ornamental Crops Research Institute, West Java, Indonesia from January 2014 to September 2015. Eight progenies of F1 hybrids and their parents (Local Bali and Rubby Red were used as materials. In the hybridization process Local Bali and Rubby Red were used as female and male parents respectively. Genetic variabilities of Gerbera were achieved through this hybridization. Gerbera progeny no. 20.009 had the longest inflorescence diameter, the biggest outer sepal and the highest number of sepals compared to the others. The flower vase life of this progeny was not significantly difference to the male parent. Qualitative characters observation showed that the hybrids were classified into two groups based on flower type, four groups of outer ray florets and two-disc groups of petal color.

  1. Effect of corn residue harvest method with ruminally undegradable protein supplementation on performance of growing calves and fiber digestibility.

    Science.gov (United States)

    King, T M; Bondurant, R G; Jolly-Breithaupt, M L; Gramkow, J L; Klopfenstein, T J; MacDonald, J C

    2017-12-01

    Two experiments evaluated the effects of corn residue harvest method on animal performance and diet digestibility. Experiment 1 was designed as a 2 × 2 + 1 factorial arrangement of treatments using 60 individually fed crossbred steers (280 kg [SD 32] initial BW; = 12). Factors were the corn residue harvest method (high-stem and conventional) and supplemental RUP at 2 concentrations (0 and 3.3% diet DM). A third harvest method (low-stem) was also evaluated, but only in diets containing supplemental RUP at 3.3% diet DM because of limitations in the amount of available low-stem residue. Therefore, the 3 harvest methods were compared only in diets containing supplemental RUP. In Exp. 2, 9 crossbred wethers were blocked by BW (42.4 kg [SD 7] initial BW) and randomly assigned to diets containing corn residue harvested 1 of 3 ways (low-stem, high-stem, and conventional). In Exp. 1, steers fed the low-stem residue diet had greater ADG compared with the steers fed conventionally harvested corn residue ( = 0.03; 0.78 vs. 0.63 kg), whereas steers fed high-stem residue were intermediate ( > 0.17; 0.69 kg), not differing from either conventional or low-stem residues. Results from in vitro OM digestibility suggest that low-stem residue had the greatest ( RUP content (40% of CP) and RUP digestibility (60%) among the 3 residues ( ≥ 0.35). No interactions were observed between harvest method and the addition of RUP ( ≥ 0.12). The addition of RUP tended to result in improved ADG (0.66 ± 0.07 vs. 0.58 ± 0.07 for supplemental RUP and no RUP, respectively; = 0.08) and G:F (0.116 ± 0.006 vs. 0.095 ± 0.020 for supplemental RUP and no RUP, respectively; = 0.02) compared with similar diets without the additional RUP. In Exp. 2, low-stem residue had greater DM and OM digestibility and DE ( < 0.01) than high-stem and conventional residues, which did not differ ( ≥ 0.63). Low-stem residue also had the greatest NDF digestibility (NDFD; < 0.01), whereas high-stem residue had greater

  2. Assaying total carotenoids in flours of corn and sweet potato flours by laser photoacoustic spectroscopy

    NARCIS (Netherlands)

    Luterotti, S.; Bicanic, D.D.; Kijak, K.; Grbesa, D.; Martinez, E.; Spruijt, R.B.

    2011-01-01

    This study describes the application of the laser photoacoustic spectroscopy (PAS) for quantification of total carotenoids (TC) in corn flours and sweetpotato flours. Overall, thirty-three different corn flours and nine sweetpotato flours were investigated. All PAS measurements were performed at

  3. High-performance solid-state supercapacitors based on graphene-ZnO hybrid nanocomposites

    Science.gov (United States)

    2013-01-01

    In this paper, we report a facile low-cost synthesis of the graphene-ZnO hybrid nanocomposites for solid-state supercapacitors. Structural analysis revealed a homogeneous distribution of ZnO nanorods that are inserted in graphene nanosheets, forming a sandwiched architecture. The material exhibited a high specific capacitance of 156 F g−1 at a scan rate of 5 mV.s−1. The fabricated solid-state supercapacitor device using these graphene-ZnO hybrid nanocomposites exhibits good supercapacitive performance and long-term cycle stability. The improved supercapacitance property of these materials could be ascribed to the increased conductivity of ZnO and better utilization of graphene. These results demonstrate the potential of the graphene-ZnO hybrid nanocomposites as an electrode in high-performance supercapacitors. PMID:24215772

  4. Effects of sorghum wet distillers grains plus solubles in steam-flaked corn-based finishing diets on steer performance, carcass characteristics, and digestibility characteristics

    Science.gov (United States)

    Two studies were conducted to evaluate the effects of sorghum wet distillers grains (SWDGS) in finishing diets on steer performance, carcass characteristics, and nutrient digestibility. In Exp. 1, 240 steers (initial BW = 379 +/-1 kg) were fed steam-flaked corn (SFC)-based diets with or without 25%...

  5. Effects of ruminally degradable starch levels on performance, nitrogen balance, and nutrient digestibility in dairy cows fed low corn-based starch diets

    Directory of Open Access Journals (Sweden)

    Guobin Luo

    2017-05-01

    Full Text Available Objective This trial was performed to examine the effects of ruminally degradable starch (RDS levels in total mixed ration (TMR with low corn-based starch on the milk production, whole-tract nutrient digestibility and nitrogen balance in dairy cows. Methods Eight multiparous Holstein cows (body weight [BW]: 717±63 kg; days in milk [DIM]: 169±29 were assigned to a crossover design with two dietary treatments: a diet containing 62.3% ruminally degradable starch (% of total starch, low RDS or 72.1% ruminally degradable starch (% of total starch, high RDS. Changes to the ruminally degradable levels were conducted by using either finely ground corn or steam-flaked corn as the starch component. Results The results showed that dry matter intake, milk yield and composition in dairy cows were not affected by dietary treatments. The concentration of milk urea nitrogen was lower for cows fed high RDS TMR than low RDS TMR. The whole-tract apparent digestibility of neutral detergent fiber, acid detergent fiber and crude protein decreased, and that of starch increased for cows fed high RDS TMR over those fed low RDS TMR, with no dietary effect on the whole-tract apparent digestibility of dry matter and organic matter. The proportion of urinary N excretion in N intake was lower and that of fecal N excretion in N intake was higher for cows fed high RDS TMR than those fed low RDS TMR. The N secretion in milk and the retention of N were not influenced by the dietary treatments. Total purine derivative was similar in cows fed high RDS TMR and low RDS TMR. Consequently, estimated microbial N flow to the duodenum was similar in cows fed high RDS TMR and low RDS TMR. Conclusion Results of this study show that ruminally degradable starch levels can influence whole-tract nutrient digestibility and nitrogen balance in dairy cows fed low corn-based starch diets, with no influence on performance.

  6. Dominant inheritance of field-evolved resistance to Bt corn in Busseolafusca.

    Directory of Open Access Journals (Sweden)

    Pascal Campagne

    Full Text Available Transgenic crops expressing Bacillus thuringiensis (Bt toxins have been adopted worldwide, notably in developing countries. In spite of their success in controlling target pests while allowing a substantial reduction of insecticide use, the sustainable control of these pest populations is threatened by the evolution of resistance. The implementation of the "high dose/refuge" strategy for managing insect resistance in transgenic crops aims at delaying the evolution of resistance to Bt crops in pest populations by promoting survival of susceptible insects. However, a crucial condition for the "high dose/refuge" strategy to be efficient is that the inheritance of resistance should be functionally recessive. Busseolafusca developed high levels of resistance to the Bt toxin Cry 1Ab expressed in Bt corn in South Africa. To test whether the inheritance of B. fusca resistance to the Bt toxin could be considered recessive we performed controlled crosses with this pest and evaluated its survival on Bt and non-Bt corn. Results show that resistance of B. fusca to Bt corn is dominant, which refutes the hypothesis of recessive inheritance. Survival on Bt corn was not lower than on non-Bt corn for both resistant larvae and the F1 progeny from resistant × susceptible parents. Hence, resistance management strategies of B. fusca to Bt corn must address non-recessive resistance.

  7. Aflatoxin contamination of developing corn kernels.

    Science.gov (United States)

    Amer, M A

    2005-01-01

    Preharvest of corn and its contamination with aflatoxin is a serious problem. Some environmental and cultural factors responsible for infection and subsequent aflatoxin production were investigated in this study. Stage of growth and location of kernels on corn ears were found to be one of the important factors in the process of kernel infection with A. flavus & A. parasiticus. The results showed positive correlation between the stage of growth and kernel infection. Treatment of corn with aflatoxin reduced germination, protein and total nitrogen contents. Total and reducing soluble sugar was increase in corn kernels as response to infection. Sucrose and protein content were reduced in case of both pathogens. Shoot system length, seeding fresh weigh and seedling dry weigh was also affected. Both pathogens induced reduction of starch content. Healthy corn seedlings treated with aflatoxin solution were badly affected. Their leaves became yellow then, turned brown with further incubation. Moreover, their total chlorophyll and protein contents showed pronounced decrease. On the other hand, total phenolic compounds were increased. Histopathological studies indicated that A. flavus & A. parasiticus could colonize corn silks and invade developing kernels. Germination of A. flavus spores was occurred and hyphae spread rapidly across the silk, producing extensive growth and lateral branching. Conidiophores and conidia had formed in and on the corn silk. Temperature and relative humidity greatly influenced the growth of A. flavus & A. parasiticus and aflatoxin production.

  8. Energy and greenhouse gas profiles of polyhydroxybutyrates derived from corn grain: a life cycle perspective.

    Science.gov (United States)

    Kim, Seungdo; Dale, Bruce E

    2008-10-15

    Polyhydroxybutyrates (PHB) are well-known biopolymers derived from sugars orvegetable oils. Cradle-to-gate environmental performance of PHB derived from corn grain is evaluated through life cycle assessment (LCA), particularly nonrenewable energy consumption and greenhouse gas emissions. Site-specific process information on the corn wet milling and PHB fermentation and recovery processes was obtained from Telles. Most of energy used in the corn wet milling and PHB fermentation and recovery processes is generated in a cogeneration power plant in which corn stover, assumed to be representative of a variety of biomass sources that could be used, is burned to generate electricity and steam. County level agricultural information is used in estimating the environmental burdens associated with both corn grain and corn stover production. Results show that PHB derived from corn grain offers environmental advantages over petroleum-derived polymers in terms of nonrenewable energy consumption and greenhouse gas emissions. Furthermore, PHB provides greenhouse gas credits, and thus PHB use reduces greenhouse gas emissions compared to petroleum-derived polymers. Corn cultivation is one of the environmentally sensitive areas in the PHB production system. More sustainable practices in corn cultivation (e.g., using no-tillage and winter cover crops) could reduce the environmental impacts of PHB by up to 72%.

  9. Planting of neonicotinoid-coated corn raises honey bee mortality and sets back colony development

    Directory of Open Access Journals (Sweden)

    Olivier Samson-Robert

    2017-08-01

    Full Text Available Worldwide occurrences of honey bee colony losses have raised concerns about bee health and the sustainability of pollination-dependent crops. While multiple causal factors have been identified, seed coating with insecticides of the neonicotinoid family has been the focus of much discussion and research. Nonetheless, few studies have investigated the impacts of these insecticides under field conditions or in commercial beekeeping operations. Given that corn-seed coating constitutes the largest single use of neonicotinoid, our study compared honey bee mortality from commercial apiaries located in two different agricultural settings, i.e. corn-dominated areas and corn-free environments, during the corn planting season. Data was collected in 2012 and 2013 from 26 bee yards. Dead honey bees from five hives in each apiary were counted and collected, and samples were analyzed using a multi-residue LC-MS/MS method. Long-term effects on colony development were simulated based on a honey bee population dynamic model. Mortality survey showed that colonies located in a corn-dominated area had daily mortality counts 3.51 times those of colonies from corn crop-free sites. Chemical analyses revealed that honey bees were exposed to various agricultural pesticides during the corn planting season, but were primarily subjected to neonicotinoid compounds (54% of analysed samples contained clothianidin, and 31% contained both clothianidin and thiamethoxam. Performance development simulations performed on hive populations’ show that increased mortality during the corn planting season sets back colony development and bears contributions to collapse risk but, most of all, reduces the effectiveness and value of colonies for pollination services. Our results also have implications for the numerous large-scale and worldwide-cultivated crops that currently rely on pre-emptive use of neonicotinoid seed treatments.

  10. Total replacement of corn by mesquite pod meal considering nutritional value, performance, feeding behavior, nitrogen balance, and microbial protein synthesis of Holstein-Zebu crossbred dairy steers.

    Science.gov (United States)

    de Oliveira Moraes, Gláucia Sabrine; de Souza, Evaristo Jorge Oliveira; Véras, Antonia Sherlânea Chaves; de Paula Almeida, Marina; da Cunha, Márcio Vieira; Torres, Thaysa Rodrigues; da Silva, Camila Sousa; Pereira, Gerfesson Felipe Cavalcanti

    2016-10-01

    The objective of the present study to assess the effects of mesquite pod addition replacing corn (0, 250, 500, 750, and 1000 g/kg in the dry matter basis) on nutrient intake, animal performance, feeding behavior, nutrient digestibility, nitrogen balance, and microbial protein synthesis. Twenty-five Holstein-Zebu crossbred dairy steers at 219 ± 22 kg initial body weight and 18 months of age were used. The experiment lasted 84 days, divided into three periods of 28 days. A completely randomized design was used, and data were submitted to analysis using PROC GLM for analysis of variance and PROC REG for regression analysis using the software Statistical Analysis Systems version 9.1. Experimental diets were composed of Tifton 85 hay, soybean meal, ground corn, mesquite pod meal, and mineral salt. Samples of food offered were collected during the last 3 days of each period, and the leftovers were collected daily, with samples bulked per week. At the end of each 28-day period, the remaining animals were weighed to determine total weight gain and average daily gain. The assessment of behavioral patterns was performed through instantaneous scans in 5-min intervals for three consecutive 12-h days. A single urine sample from each animal was collected on the last day of each collection period at about 4 h after the first feeding. The replacement of corn by mesquite pod meal did not significantly influence treatments regarding nutrients intake, animal performance, and feeding behavior. Retained and consumed nitrogen ratio did not statistically differ between replacement levels. Likewise, there were no statistical differences regarding microbial protein synthesis and efficiency between replacement levels. Mesquite pod meal can be used in Holstein-Zebu crossbred dairy steers' diet with total corn replacement.

  11. "King Corn": Teaching the Food Crisis

    Science.gov (United States)

    Swinehart, Tim

    2012-01-01

    "King Corn" is in so many ways the story of how government food policy has entirely remade the food landscape in the United States over the last 40 years. From the massive expansion of the number of acres of corn grown across the country, to the ever-increasing ways that corn is incorporated into the food production process, to the…

  12. Biofuel feedstock and blended coproducts compared with deoiled corn distillers grains in feedlot diets: Effects on cattle growth performance, apparent total tract nutrient digestibility, and carcass characteristics.

    Science.gov (United States)

    Opheim, T L; Campanili, P R B; Lemos, B J M; Ovinge, L A; Baggerman, J O; McCuistion, K C; Galyean, M L; Sarturi, J O; Trojan, S J

    2016-01-01

    Crossbred steers (British × Continental; = 192; initial BW 391 ± 28 kg) were used to evaluate the effects of feeding ethanol coproducts on feedlot cattle growth performance, apparent nutrient digestibility, and carcass characteristics. Steers were blocked by initial BW and assigned randomly to 1 of 6 dietary treatments within block. Treatments (replicated in 8 pens with 4 steers/pen) included 1) control, steam-flaked corn-based diet (CTL), 2) corn dried distillers grains with solubles (DGS; DRY-C), 3) deoiled corn dried DGS (DRY-CLF), 4) blended 50/50 corn/sorghum dried DGS (DRY-C/S), 5) sorghum dried DGS (DRY-S), and 6) sorghum wet DGS (WET-S). Inclusion of DGS was 25% (DM basis). The DGS diets were isonitrogenous, CTL was formulated for 13.5% CP, and all diets were balanced for ether extract. Final shrunk BW, ADG, and DMI did not differ among CTL and DGS treatments ( ≥ 0.19). Overall G:F did not differ from CTL for DRY-C, DRY-CLF, or WET-S ( ≥ 0.12); however, G:F was 9.6% less for DRY-S compared with CTL ( carcass-adjusted G:F vs. DRY-S. For WET-S, final BW and ADG were greater ( Carcass weight, dressing percent, and marbling score did not differ between CTL and DGS diets ( ≥ 0.23). For DRY-S, HCW was lower than for DRY-C ( = 0.02); however, compared with DRY-S, HCW tended to be greater for DRY-C/S ( = 0.10) and WET-S ( = 0.07). At a moderately high (25% DM) inclusion, blending C/S or feeding WET-S resulted in cattle growth performance and carcass characteristics similar to those of CTL and corn-based coproducts.

  13. Comparison of amino acid digestibility coefficients for corn, corn gluten meal, and corn distillers dried grains with solubles (DDGS) among three different bioassays

    Science.gov (United States)

    The objective of this study was to determine standardized AA digestibility of corn, corn gluten meal (CGM) and three distillers dried grains with solubles (DDGS) using the precision-fed cecectomized rooster assay (PFR), the standardized ileal AA broiler chicken assay (SIAAD), and a newly developed p...

  14. Projected outcomes of a public-industry partnership for enhancing corn nitrogen research and datasets

    Science.gov (United States)

    Research is needed over a wide geographic range of soil and weather scenarios to evaluate methods and tools for corn N fertilizer applications. The objectives of this research were to conduct standardized corn N rate response field studies to evaluate the performance of multiple public-domain N deci...

  15. Corn Residue Use by Livestock in the United States

    Directory of Open Access Journals (Sweden)

    Marty R. Schmer

    2017-01-01

    Full Text Available Corn ( L. residue grazing or harvest provides a simple and economical practice to integrate crops and livestock, but limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA Economic Research Service surveyed producers from 19 states on corn grain and residue management practices. Total corn residue grazed or harvested was 4.87 million ha. Approximately 4.06 million ha was grazed by 11.7 million livestock (primarily cattle in 2010. The majority of grazed corn residue occurred in Nebraska (1.91 million ha, Iowa (385,000 ha, South Dakota (361,000 ha, and Kansas (344,000 ha. Average grazing days ranged from 10 to 73 d (mean = 40 d. Corn residue harvests predominantly occurred in the central and northern Corn Belt, with an estimated 2.9 Tg of corn residue harvested across the 19 states. This survey highlights the importance of corn residue for US livestock, particularly in the western Corn Belt.

  16. Experimental Viscoelastic Characterization of Corn Cob Composited ...

    African Journals Online (AJOL)

    The nature of viscoelasticity in biomateria1s and the techniques for characterizing their rheological properties were reviewed. Relaxation tests were performed with cylindrical samples of corn cob composites which were initially subjected to radial compression. It was found that a Maxwell model composed of two simple ...

  17. Possible causes of dry pea synergy to corn

    Science.gov (United States)

    Dry pea improves corn yield and tolerance to weed interference compared with soybean, spring wheat, or canola as preceding crops. To understand this synergy between dry pea and corn, we examined growth and nutrient concentration of corn following dry pea or soybean in sequence. Each corn plot was ...

  18. Predicting Hybrid Performances for Quality Traits through Genomic-Assisted Approaches in Central European Wheat

    KAUST Repository

    Liu, Guozheng

    2016-07-06

    Bread-making quality traits are central targets for wheat breeding. The objectives of our study were to (1) examine the presence of major effect QTLs for quality traits in a Central European elite wheat population, (2) explore the optimal strategy for predicting the hybrid performance for wheat quality traits, and (3) investigate the effects of marker density and the composition and size of the training population on the accuracy of prediction of hybrid performance. In total 135 inbred lines of Central European bread wheat (Triticum aestivum L.) and 1,604 hybrids derived from them were evaluated for seven quality traits in up to six environments. The 135 parental lines were genotyped using a 90k single-nucleotide polymorphism array. Genome-wide association mapping initially suggested presence of several quantitative trait loci (QTLs), but cross-validation rather indicated the absence of major effect QTLs for all quality traits except of 1000-kernel weight. Genomic selection substantially outperformed marker-assisted selection in predicting hybrid performance. A resampling study revealed that increasing the effective population size in the estimation set of hybrids is relevant to boost the accuracy of prediction for an unrelated test population.

  19. Predicting Hybrid Performances for Quality Traits through Genomic-Assisted Approaches in Central European Wheat.

    Directory of Open Access Journals (Sweden)

    Guozheng Liu

    Full Text Available Bread-making quality traits are central targets for wheat breeding. The objectives of our study were to (1 examine the presence of major effect QTLs for quality traits in a Central European elite wheat population, (2 explore the optimal strategy for predicting the hybrid performance for wheat quality traits, and (3 investigate the effects of marker density and the composition and size of the training population on the accuracy of prediction of hybrid performance. In total 135 inbred lines of Central European bread wheat (Triticum aestivum L. and 1,604 hybrids derived from them were evaluated for seven quality traits in up to six environments. The 135 parental lines were genotyped using a 90k single-nucleotide polymorphism array. Genome-wide association mapping initially suggested presence of several quantitative trait loci (QTLs, but cross-validation rather indicated the absence of major effect QTLs for all quality traits except of 1000-kernel weight. Genomic selection substantially outperformed marker-assisted selection in predicting hybrid performance. A resampling study revealed that increasing the effective population size in the estimation set of hybrids is relevant to boost the accuracy of prediction for an unrelated test population.

  20. Predicting Hybrid Performances for Quality Traits through Genomic-Assisted Approaches in Central European Wheat

    KAUST Repository

    Liu, Guozheng; Zhao, Yusheng; Gowda, Manje; Longin, C. Friedrich H.; Reif, Jochen C.; Mette, Michael F.

    2016-01-01

    Bread-making quality traits are central targets for wheat breeding. The objectives of our study were to (1) examine the presence of major effect QTLs for quality traits in a Central European elite wheat population, (2) explore the optimal strategy for predicting the hybrid performance for wheat quality traits, and (3) investigate the effects of marker density and the composition and size of the training population on the accuracy of prediction of hybrid performance. In total 135 inbred lines of Central European bread wheat (Triticum aestivum L.) and 1,604 hybrids derived from them were evaluated for seven quality traits in up to six environments. The 135 parental lines were genotyped using a 90k single-nucleotide polymorphism array. Genome-wide association mapping initially suggested presence of several quantitative trait loci (QTLs), but cross-validation rather indicated the absence of major effect QTLs for all quality traits except of 1000-kernel weight. Genomic selection substantially outperformed marker-assisted selection in predicting hybrid performance. A resampling study revealed that increasing the effective population size in the estimation set of hybrids is relevant to boost the accuracy of prediction for an unrelated test population.

  1. Predicting Hybrid Performances for Quality Traits through Genomic-Assisted Approaches in Central European Wheat

    Science.gov (United States)

    Liu, Guozheng; Zhao, Yusheng; Gowda, Manje; Longin, C. Friedrich H.; Reif, Jochen C.; Mette, Michael F.

    2016-01-01

    Bread-making quality traits are central targets for wheat breeding. The objectives of our study were to (1) examine the presence of major effect QTLs for quality traits in a Central European elite wheat population, (2) explore the optimal strategy for predicting the hybrid performance for wheat quality traits, and (3) investigate the effects of marker density and the composition and size of the training population on the accuracy of prediction of hybrid performance. In total 135 inbred lines of Central European bread wheat (Triticum aestivum L.) and 1,604 hybrids derived from them were evaluated for seven quality traits in up to six environments. The 135 parental lines were genotyped using a 90k single-nucleotide polymorphism array. Genome-wide association mapping initially suggested presence of several quantitative trait loci (QTLs), but cross-validation rather indicated the absence of major effect QTLs for all quality traits except of 1000-kernel weight. Genomic selection substantially outperformed marker-assisted selection in predicting hybrid performance. A resampling study revealed that increasing the effective population size in the estimation set of hybrids is relevant to boost the accuracy of prediction for an unrelated test population. PMID:27383841

  2. Modeling and performance analysis of a concentrated photovoltaic–thermoelectric hybrid power generation system

    International Nuclear Information System (INIS)

    Lamba, Ravita; Kaushik, S.C.

    2016-01-01

    Highlights: • Thermodynamic model of concentrated photovoltaic–thermoelectric system is analysed. • Thomson effect reduces the power output of PV, TE and hybrid PV–TEG system. • Effect of thermocouple number, irradiance, PV and TE current have been studied. • The optimum concentration ratio for maximum power output has been found out. • The overall efficiency and power output of hybrid PV–TEG system has been improved. - Abstract: In this study, a thermodynamic model for analysing the performance of a concentrated photovoltaic–thermoelectric generator (CPV–TEG) hybrid system including Thomson effect in conjunction with Seebeck, Joule and Fourier heat conduction effects has been developed and simulated in MATALB environment. The expressions for calculating the temperature of photovoltaic (PV) module, hot and cold sides of thermoelectric (TE) module are derived analytically as well. The effect of concentration ratio, number of thermocouples in TE module, solar irradiance, PV module current and TE module current on power output and efficiency of the PV, TEG and hybrid PV–TEG system have been studied. The optimum concentration ratio corresponding to maximum power output of the hybrid system has been found out. It has been observed that by considering Thomson effect in TEG module, the power output of the PV, TE and hybrid PV–TEG systems decreases and at C = 1 and 5, it reduces the power output of hybrid system by 0.7% and 4.78% respectively. The results of this study may provide basis for performance optimization of a practical irreversible CPV–TEG hybrid system.

  3. Using MODIS Data to Predict Regional Corn Yields

    Directory of Open Access Journals (Sweden)

    Ho-Young Ban

    2016-12-01

    Full Text Available A simple approach was developed to predict corn yields using the MoDerate Resolution Imaging Spectroradiometer (MODIS data product from two geographically separate major corn crop production regions: Illinois, USA and Heilongjiang, China. The MOD09A1 data, which are eight-day interval surface reflectance data, were obtained from day of the year (DOY 89 to 337 to calculate the leaf area index (LAI. The sum of the LAI from early in the season to a given date in the season (end of DOY (EOD was well fitted to a logistic function and represented seasonal changes in leaf area duration (LAD. A simple phenology model was derived to estimate the dates of emergence and maturity using the LAD-logistic function parameters b1 and b2, which represented the rate of increase in LAI and the date of maximum LAI, respectively. The phenology model predicted emergence and maturity dates fairly well, with root mean square error (RMSE values of 6.3 and 4.9 days for the validation dataset, respectively. Two simple linear regression models (YP and YF were established using LAD as the variable to predict corn yield. The yield model YP used LAD from predicted emergence to maturity, and the yield model YF used LAD for a predetermined period from DOY 89 to a particular EOD. When state/province corn yields for the validation dataset were predicted at DOY 321, near completion of the corn harvest, the YP model, including the predicted phenology, performed much better than the YF model, with RMSE values of 0.68 t/ha and 0.66 t/ha for Illinois and Heilongjiang, respectively. The YP model showed similar or better performance, even for the much earlier pre-harvest yield prediction at DOY 257. In addition, the model performance showed no difference between the two study regions with very different climates and cultivation methods, including cultivar and irrigation management. These results suggested that the approach described in this paper has potential for application to

  4. Effect of length of interval between cereal rye cover crop termination and corn planting on seedling root disease and corn growth

    Science.gov (United States)

    Cereal rye cover crops terminated immediately before corn planting can sometimes reduce corn population, early growth, and yield. We hypothesized that cereal rye may act as a green bridge for corn pathogens and may increase corn seedling root disease. A field experiment was conducted over two years ...

  5. Performance Analysis of a Hybrid Power Cutting System for Roadheader

    Directory of Open Access Journals (Sweden)

    Yang Yang

    2017-01-01

    Full Text Available An electrohydraulic hybrid power cutting transmission system for roadheader under specific working condition was proposed in this paper. The overall model for the new system composed of an electric motor model, a hydraulic pump-motor model, a torsional planetary set model, and a hybrid power train model was established. The working mode characteristics were simulated under the conditions of taking the effect of cutting picks into account. The advantages of new hybrid power cutting system about the dynamic response under shock load were investigated compared with the traditional cutting system. The results illustrated that the hybrid power system had an obvious cushioning in terms of the dynamic load of cutting electric motor and planetary gear set. Besides, the hydraulic motor could provide an auxiliary power to improve the performance of the electric motor. With further analysis, a dynamic load was found to have a high relation to the stiffness and damping of coupling in the transmission train. The results could be a useful guide for the design of cutting transmission of roadheader.

  6. Nitrogen Soil Testing for Corn in Virginia

    OpenAIRE

    Evanylo, Gregory K.; Alley, Marcus M., 1947-

    2009-01-01

    An adequate supply of plant-available nitrogen (N) is crucial for efficient corn production, and corn N requirements are greater than any other nutrient. This publication reviews the link between nitrogen and corn production, nitrogen behavior, soil testing, test procedures and recommendations.

  7. Geographic information systems in corn rootworm management

    Science.gov (United States)

    Corn rootworms (Diabrotica spp. Coleoptera: Chrysomelidae) are serious pests of corn (Zea mays) in the United States and Europe. Control measures for corn rootworms (CRW) were historically based upon chemical pesticides and crop rotation. Pesticide use created environmental and economic concerns. In...

  8. Utilization of Different Corn Fractions by Broilers

    OpenAIRE

    Costa, SIFR; Stringhini, JH; Ribeiro, AML; Pontalti, G; MacManus, C

    2015-01-01

    ABSTRACTThis study was conducted to evaluate the nutritional values of fractions of damaged corn. One hundred and eighty 22-d-old Cobb 500 male broilers were distributed in batteries according to a completely randomized design with six treatments of six replicates each. The treatments consisted of diets containing five corn fractions, classified as sound, fermented, insect-damaged, mold-damaged, or reference corn. The test diets consisted of 60% of reference diet + 40% of each corn fraction. ...

  9. A Triblock Copolymer Design Leads to Robust Hybrid Hydrogels for High-Performance Flexible Supercapacitors.

    Science.gov (United States)

    Zhang, Guangzhao; Chen, Yunhua; Deng, Yonghong; Wang, Chaoyang

    2017-10-18

    We report here an intriguing hybrid conductive hydrogel as electrode for high-performance flexible supercapacitor. The key is using a rationally designed water-soluble ABA triblock copolymer (termed as IAOAI) containing a central poly(ethylene oxide) block (A) and terminal poly(acrylamide) (PAAm) block with aniline moieties randomly incorporated (B), which was synthesized by reversible additional fragment transfer polymerization. The subsequent copolymerization of aniline monomers with the terminated aniline moieties on the IAOAI polymer generates a three-dimensional cross-linking hybrid network. The hybrid hydrogel electrode demonstrates robust mechanical flexibility, remarkable electrochemical capacitance (919 F/g), and cyclic stability (90% capacitance retention after 1000 cycles). Moreover, the flexible supercapacitor based on this hybrid hydrogel electrode presents a large specific capacitance (187 F/g), superior to most reported conductive hydrogel-based supercapacitors. With the demonstrated additional favorable cyclic stability and excellent capacitive and rate performance, this hybrid hydrogel-based supercapacitor holds great promise for flexible energy-storage device.

  10. Value of Neonicotinoid Insecticide Seed Treatments in Mid-South Corn (Zea mays) Production Systems.

    Science.gov (United States)

    North, J H; Gore, J; Catchot, A L; Stewart, S D; Lorenz, G M; Musser, F R; Cook, D R; Kerns, D L; Leonard, B R; Dodds, D M

    2018-02-09

    Neonicotinoid seed treatments are one of several effective control options used in corn, Zea mays L., production in the Mid-South for early season insect pests. An analysis was performed on 91 insecticide seed treatment trials from Arkansas, Louisiana, Mississippi, and Tennessee to determine the value of neonicotinoids in corn production systems. The analysis compared neonicotinoid insecticide treated seed plus a fungicide to seed only with the same fungicide. When analyzed by state, corn yields were significantly higher when neonicotinoid seed treatments were used compared to fungicide only treated seed in Louisiana and Mississippi. Corn seed treated with neonicotinoid seed treatments yielded 111, 1,093, 416, and 140 kg/ha, higher than fungicide only treatments for Arkansas, Louisiana, Mississippi, and Tennessee, respectively. Across all states, neonicotinoid seed treatments resulted in a 700 kg/ha advantage compared to fungicide only treated corn seed. Net returns for corn treated with neonicotinoid seed treatment were $1,446/ha compared with $1,390/ha for fungicide only treated corn seed across the Mid-South. Economic returns for neonicotinoid seed treated corn were significantly greater than fungicide-only-treated corn seed in 8 out of 14 yr. When analyzed by state, economic returns for neonicotinoid seed treatments were significantly greater than fungicide-only-treated seed in Louisiana. In some areas, dependent on year, neonicotinoid seed treatments provide significant yield and economic benefits in Mid-South corn. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  11. Assessment of the Nutritive Value of Whole Corn Stover and Its Morphological Fractions

    Directory of Open Access Journals (Sweden)

    H. Y. Li

    2014-02-01

    Full Text Available This study investigated the chemical composition and ruminal degradability of corn stover in three maize-planting regions in Qiqihaer, Heilongjiang Province, China. The whole stover was separated into seven morphological fractions, i.e., leaf blade, leaf sheath, stem rind, stem pith, stem node, ear husk, and corn tassel. The assessment of nutritive value of corn stover and its fractions was performed based on laboratory assays of the morphological proportions, chemical composition, and in situ degradability of dry matter (DM, neutral detergent fiber (NDF, and acid detergent fiber (ADF. The chemical composition of corn stover was significantly different from plant top to bottom (p<0.05. Among the whole corn stover and seven morphological fractions, leaf blade had the highest crude protein (CP content and the lowest NDF and ADF contents (p<0.05, whereas stem rind had the lowest CP content and the highest ADF and acid detergent lignin (ADL contents (p<0.05. Ear husk had significantly higher NDF content and relatively lower ADL content than other corn stover fractions. Overall, the effective degradability of DM, NDF, and ADF in rumen was the highest in leaf blade and stem pith, followed by ear husk. The results indicate that leaf blade, ear husk, and stem pith potentially have higher nutritive values than the other fractions of corn stover. This study provides reference data for high-efficiency use of corn stover in feeding ruminants.

  12. Project Startup: Evaluating the Performance of Hydraulic Hybrid Refuse Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    2015-09-01

    The Fleet Test and Evaluation Team at the National Renewable Energy Laboratory (NREL) is evaluating the in-service performance of 10 next-generation hydraulic hybrid refuse vehicles (HHVs), 8 previous-generation HHVs, and 8 comparable conventional diesel vehicles operated by Miami-Dade County's Public Works and Waste Management Department in southern Florida. The HHVs under study - Autocar E3 refuse trucks equipped with Parker Hannifin's RunWise Advanced Series Hybrid Drive systems - can recover as much as 70 percent of the energy typically lost during braking and reuse it to power the vehicle. NREL's evaluation will assess the performance of this technology in commercial operation and help Miami-Dade County determine the ideal routes for maximizing the fuel-saving potential of its HHVs.

  13. Desempenho de pintos de corte alimentados com rações contendo milho pré-gelatinizado Performance of broiler chicks fed pre-gelatinized corn in pre-starter and starter feed

    Directory of Open Access Journals (Sweden)

    José Henrique Stringhini

    2009-09-01

    corn for broilers from one to 21 days of age. In the first experiment, the metabolism of pre-gelatinized corn, corn starch and corn germ meal was assessed by the total excreta collection method from 4 to 7 days of age and values of apparent (AME and corrected metabolizable energy (CAME and the results were, respectively: 3370, 3379.7, 3259.1 kcal/kg de AME and 3299.8, 3369.7, 3051.6 kcal/kg for CAME. The inclusion level of pre-gelatinized corn was evaluated in pre-starter (1 to 7 days of age - Experiment 2 and starter (8 to 21 days of age - Experiment 3 broiler rations. Broiler performance from one to seven days of age was not affected by pre-gelatinized corn in the feed. A quadratic effect for the dry matter digestibility coefficient (minimum point of 28.6% inclusion and nitrogen (minimum point of 31.7% inclusion and negative linear negative on the ether extract digestibility coefficient. From 8 to 21 days of age, broiler performance was affected linearly and negatively for final weight, weight gain and feed intake and quadratic for feed-to-gain ratio (maximum point of 34.3% inclusion. For the dry matter, nitrogen and ether extract digestibility coefficients, there was a positive linear effect for pre-gelatinized corn included in substitution of corn. Pre-gelatinized corn was a good alternative for pre-starter ration, but, in spite of the better digestibility coefficient results, performance got worse as pre-gelatinized corn increased in diets from 8 to 21 days of age. Pre-gelatinized corn was a good alternative as energetic ingredient for first week chick feed, but, in the starter phase it did not promote good performance despite the good digestibility indexes obtained.

  14. Pest Control in Corn and Soybeans: Weeds - Insects - Diseases.

    Science.gov (United States)

    Doersch, R. E.; And Others

    This document gives the characteristics and application rates for herbicides used to control annual weeds in corn, annual and perennial broadleaf weeds in corn, quackgrass and yellow nutsedge in corn, and annual weeds in soybeans. It also gives insecticide use information for corn and soybeans. A brief discussion of disease control in corn and…

  15. 21 CFR 137.285 - Degerminated yellow corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Degerminated yellow corn meal. 137.285 Section 137... Cereal Flours and Related Products § 137.285 Degerminated yellow corn meal. Degerminated yellow corn meal, degermed yellow corn meal, conforms to the definition and standard of identity prescribed by § 137.265 for...

  16. Performance, carcass characteristics, and ruminal pH of Nellore and Angus young bulls fed a whole shelled corn diet.

    Science.gov (United States)

    Carvalho, J R R; Chizzotti, M L; Schoonmaker, J P; Teixeira, P D; Lopes, R C; Oliveira, C V R; Ladeira, M M

    2016-06-01

    The objectives of this study were to test the interaction of breed (Nellore or Angus) and diet (whole shelled corn [WSC] or ground corn [GC] with silage) on growth performance, carcass characteristics, and ruminal pH of young bulls. Thirty-six bulls (18 Nellore and 18 Angus) with the range in age of 18 to 22 mo and BW of 381 ± 12 kg were used in a completely randomized design experiment with a 2 × 2 factorial arrangement of treatments (2 breeds and 2 diets). Experimental diets (DM basis) included 1) a GC diet containing 30% corn silage and 70% GC- and soybean meal-based concentrate and 2) a WSC diet containing 85% WSC and 15% of a soybean meal- and mineral-based pelleted supplement. An additional 8 bulls were slaughtered at the beginning of the experimental period for determination of initial carcass weight. The treatments were Nellore fed the GC diet, Nellore fed the WSC diet, Angus fed the GC diet, and Angus fed the WSC diet. Greater DMI ( Angus bulls compared with Nellore bulls, regardless of diet. Lower average ruminal pH ( = 0.04), maximum ruminal pH (P = 0.02), and DMI ( Angus breed ( < 0.02) and were greater when bulls were fed the GC diet. The WSC diet without forage may be useful for feedlots because this diet promoted greater G:F than the GC diet, regardless of breed. However, special care must be exercised in feed management during adaptation and throughout the feeding of Nellore animals to avoid digestive disorders and fluctuations in DMI.

  17. Practical Switching-Based Hybrid FSO/RF Transmission and Its Performance Analysis

    KAUST Repository

    Usman, Muneer

    2014-10-01

    Hybrid free-space optical (FSO)/radio-frequency (RF) systems have emerged as a promising solution for high-data-rate wireless backhaul. We present and analyze a switching-based transmission scheme for the hybrid FSO/RF system. Specifically, either the FSO or RF link will be active at a certain time instance, with the FSO link enjoying a higher priority. We considered both a single-threshold case and a dual-threshold case for FSO link operation. Analytical expressions have been obtained for the outage probability, average bit error rate, and ergodic capacity for the resulting system. Numerical examples are presented to compare the performance of the hybrid scheme with the FSO-only scenario.

  18. Practical Switching-Based Hybrid FSO/RF Transmission and Its Performance Analysis

    KAUST Repository

    Usman, Muneer; Hong-Chuan Yang; Alouini, Mohamed-Slim

    2014-01-01

    Hybrid free-space optical (FSO)/radio-frequency (RF) systems have emerged as a promising solution for high-data-rate wireless backhaul. We present and analyze a switching-based transmission scheme for the hybrid FSO/RF system. Specifically, either the FSO or RF link will be active at a certain time instance, with the FSO link enjoying a higher priority. We considered both a single-threshold case and a dual-threshold case for FSO link operation. Analytical expressions have been obtained for the outage probability, average bit error rate, and ergodic capacity for the resulting system. Numerical examples are presented to compare the performance of the hybrid scheme with the FSO-only scenario.

  19. Hybrid Modeling Improves Health and Performance Monitoring

    Science.gov (United States)

    2007-01-01

    Scientific Monitoring Inc. was awarded a Phase I Small Business Innovation Research (SBIR) project by NASA's Dryden Flight Research Center to create a new, simplified health-monitoring approach for flight vehicles and flight equipment. The project developed a hybrid physical model concept that provided a structured approach to simplifying complex design models for use in health monitoring, allowing the output or performance of the equipment to be compared to what the design models predicted, so that deterioration or impending failure could be detected before there would be an impact on the equipment's operational capability. Based on the original modeling technology, Scientific Monitoring released I-Trend, a commercial health- and performance-monitoring software product named for its intelligent trending, diagnostics, and prognostics capabilities, as part of the company's complete ICEMS (Intelligent Condition-based Equipment Management System) suite of monitoring and advanced alerting software. I-Trend uses the hybrid physical model to better characterize the nature of health or performance alarms that result in "no fault found" false alarms. Additionally, the use of physical principles helps I-Trend identify problems sooner. I-Trend technology is currently in use in several commercial aviation programs, and the U.S. Air Force recently tapped Scientific Monitoring to develop next-generation engine health-management software for monitoring its fleet of jet engines. Scientific Monitoring has continued the original NASA work, this time under a Phase III SBIR contract with a joint NASA-Pratt & Whitney aviation security program on propulsion-controlled aircraft under missile-damaged aircraft conditions.

  20. Brake Performance Analysis of ABS for Eddy Current and Electrohydraulic Hybrid Brake System

    Directory of Open Access Journals (Sweden)

    Ren He

    2013-01-01

    Full Text Available This paper introduces an eddy current and electro-hydraulic hybrid brake system to solve problems such as wear, thermal failure, and slow response of traditional vehicle brake system. Mathematical model was built to calculate the torque of the eddy current brake system and hydraulic brake system and analyze the braking force distribution between two types of brake systems. A fuzzy controller on personal computer based on LabVIEW and Matlab was designed and a set of hardware in the loop system was constructed to validate and analyze the performance of the hybrid brake system. Through lots of experiments on dry and wet asphalt roads, the hybrid brake system achieves perfect performance on the experimental bench, the hybrid system reduces abrasion and temperature of the brake disk, response speed is enhanced obviously, fuzzy controller keeps high utilization coefficient due to the optimal slip ratio regulation, and the total brake time has a smaller decrease than traditional hydraulic brake system.

  1. 21 CFR 137.280 - Bolted yellow corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bolted yellow corn meal. 137.280 Section 137.280... Flours and Related Products § 137.280 Bolted yellow corn meal. Bolted yellow corn meal conforms to the definition and standard of identity prescribed by § 137.255 for bolted white corn meal except that cleaned...

  2. Rapid corn and soybean mapping in US Corn Belt and neighboring areas

    Science.gov (United States)

    Zhong, Liheng; Yu, Le; Li, Xuecao; Hu, Lina; Gong, Peng

    2016-11-01

    The goal of this study was to promptly map the extent of corn and soybeans early in the growing season. A classification experiment was conducted for the US Corn Belt and neighboring states, which is the most important production area of corn and soybeans in the world. To improve the timeliness of the classification algorithm, training was completely based on reference data and images from other years, circumventing the need to finish reference data collection in the current season. To account for interannual variability in crop development in the cross-year classification scenario, several innovative strategies were used. A random forest classifier was used in all tests, and MODIS surface reflectance products from the years 2008-2014 were used for training and cross-year validation. It is concluded that the fuzzy classification approach is necessary to achieve satisfactory results with R-squared ~0.9 (compared with the USDA Cropland Data Layer). The year of training data is an important factor, and it is recommended to select a year with similar crop phenology as the mapping year. With this phenology-based and cross-year-training method, in 2015 we mapped the cropping proportion of corn and soybeans around mid-August, when the two crops just reached peak growth.

  3. BIOFUEL FROM CORN STOVER

    Directory of Open Access Journals (Sweden)

    Ljiljanka Tomerlin

    2003-12-01

    Full Text Available This paper deals with production of ethyl alcohol (biofuel from corn stover acid hydrolysate by yeasts, respectively at Pichia stipitis y-7124 and Pachysolen tannophilus y-2460 and Candida shehatae y-12856. Since moist corn stover (Hybryds 619 is proving to decomposition by phyllospheric microflora. It was (conserved spattered individually by microbicids: Busan-90, Izosan-G and formalin. In form of prismatic bales, it was left in the open air during 6 months (Octobar - March. At the beginning and after 6 months the microbiological control was carried out. The only one unspattered (control and three stover corn bals being individually spattered by microbicids were fragmented and cooked with sulfur acid. The obtained four acid hydrolysates are complex substratums, containing, apart from the sugars (about 11 g dm-3 pentosa and about 5.4 g dm-3 hexose, decomposite components as lignin, caramel sugars and uronic acids. By controlling the activity of the mentioned yeasts it was confirmed that yeasts Pichia stipitis y-7124 obtained best capability of ethyl alcohol production from corn stover acid hydrolysate at 0.23 vol. % to 0.49 vol. %.

  4. Influence of the corn resistance gene Mv on the fitness of Peregrinus maidis (Hemiptera: Delphacidae) and on the transmission of maize mosaic virus (Rhabdoviridae: Nucleorhabdovirus).

    Science.gov (United States)

    Higashi, C H V; Brewbaker, J L; Bressan, A

    2013-08-01

    Crops that are resistant to pests and pathogens are cost-effective for the management of pests and diseases. A corn (Zea mays L.) breeding program conducted in Hawaii has identified a source of heritable resistance to maize mosaic virus (MMV) (Rhabdoviridae: Nucleorhabdovirus). This resistance is controlled by the gene Mv, which has been shown to have a codominant action. To date, no studies have examined whether the resistance associated with this gene affects only MMV or whether it also affects the insect vector, the corn planthopper Peregrinus maidis (Ashmead) (Hemiptera: Delphacidae). Here, we examined the life history of the corn planthopper and its ability to transmit MMV on near isogenic lines that were homozygous dominant (Mv/Mv), homozygous recessive (mv/mv), or heterozygous (Mv/mv) for the gene. A field trial was also conducted to study the colonization of the corn plants with different genotypes by the planthopper. Although field observations revealed slightly lower densities ofplanthoppers on corn with the genotype Mv/Mv than on the inbreds with the genotype mv/mv and their hybrids with the genotype Mv/mv, laboratory assays showed no effects of the gene on planthopper development, longevity, or fecundity. In the field, the corn lines Mv/Mv had a lower incidence of MMV-infected plants. However, in the greenhouse, the transmission of MMV to corn seedlings did not differ across the near isogenic lines, although the corn lines Mv/Mv showed a delayed onset of symptoms compared with the corn lines mv/mv and Mv/mv. The acquisition of MMV by corn planthoppers on the corn genotypes Mv/Mv and Mv/mv averaged 0.2, whereas the acquisition on the corn genotypes mv/mv averaged > 0.3. Our results show that the Mv gene does not influence the fitness of the planthopper vector, suggesting that it may confer resistance by other means, possibly by limiting virus replication or movement within the host plant.

  5. Applications of Novel Carbon/AlPO4 Hybrid-Coated H2Ti12O25 as a High-Performance Anode for Cylindrical Hybrid Supercapacitors.

    Science.gov (United States)

    Lee, Jeong-Hyun; Lee, Seung-Hwan

    2016-10-26

    The hybrid supercapacitor using carbon/AlPO 4 hybrid-coated H 2 Ti 12 O 25 /activated carbon is fabricated as a cylindrical cell and investigated against electrochemical performances. The hybrid coating shows that the conductivity for the electron and Li ion is superior and it prevented active material from HF attack. Consequently, carbon/AlPO 4 hybrid-coated H 2 Ti 12 O 25 shows enhanced rate capability and long-term cycle life. Also, the hybrid coating inhibits swelling phenomenon caused by gas generated as decomposition reaction of electrolyte. Therefore, the hybrid supercapacitor using carbon/AlPO 4 hybrid-coated H 2 Ti 12 O 25 /activated carbon can be applied to an energy storage system that requires a long-term life.

  6. Extensive Degradation and Low Bioavailability of Orally Consumed Corn miRNAs in Mice

    Directory of Open Access Journals (Sweden)

    Haiqiu Huang

    2018-02-01

    Full Text Available The current study seeks to resolve the discrepancy in the literature regarding the cross-kingdom transfer of plant microRNAs (miRNAs into mammals using an improved miRNA processing and detection method. Two studies utilizing C57BL/6 mice were performed. In the first study, mice were fed an AIN-93M diet and gavaged with water, random deoxynucleotide triphosphates (dNTP or isolated corn miRNAs for two weeks (n = 10 per group. In the second study, mice were fed an AIN-93M diet, or the diet supplemented with 3% fresh or autoclaved corn powder for two weeks (n = 10 per group. Corn miRNA levels were analyzed in blood and tissue samples by real-time PCR (RT-PCR following periodate oxidation and β elimination treatments to eliminate artifacts. After removing false positive detections, there were no differences in corn miRNA levels between control and treated groups in cecal, fecal, liver and blood samples. Using an in vitro digestion system, corn miRNAs in AIN-93M diet or in the extracts were found to be extensively degraded. Less than 1% was recovered in the gastrointestinal tract after oral and gastric phases. In conclusion, no evidence of increased levels of corn miRNAs in whole blood or tissues after supplementation of corn miRNAs in the diet was observed in a mouse model.

  7. Distributional patterns of fall armyworm parasitoids in a corn field and pasture field in Florida

    Science.gov (United States)

    An assessment of parasitoids and their selective patterns among Spodoptera frugiperda corn and rice host strains was performed from August 2008-August 2010 in a corn crop and a grass pasture in northern Florida under different seasonal conditions (spring and fall). Sentinel larvae from our laborator...

  8. Analysis of xanthophylls in corn by HPLC.

    Science.gov (United States)

    Moros, E E; Darnoko, D; Cheryan, M; Perkins, E G; Jerrell, J

    2002-10-09

    An HPLC method was developed using the C-30 carotenoid column to separate and identify the major xanthophylls in corn (lutein, zeaxanthin, and beta-cryptoxanthin). A photodiode array detector and a mobile phase consisting of methyl tert-butyl ether/methanol/water was used. All three xanthophylls eluted in less than 25 min. Yellow dent corn had a total xanthophyll content of 21.97 microg/g with lutein content of 15.7 microg/g, zeaxanthin content of 5.7 microg/g, and beta-cryptoxanthin of 0.57 microg/g. Commercial corn gluten meal had a 7 times higher concentration of xanthophylls (145 microg/g), and deoiled corn contained 18 microg/g, indicating that the xanthophylls are probably bound to the zein fraction of corn proteins.

  9. Breed effect between Mos rooster (Galician indigenous breed) and Sasso T-44 line and finishing feed effect of commercial fodder or corn.

    Science.gov (United States)

    Franco, D; Rois, D; Vázquez, J A; Purriños, L; González, R; Lorenzo, J M

    2012-02-01

    The aim of this research was to study the Mos rooster breed growth performance, carcass, and meat quality. The breed effect (Mos vs. Sasso T-44) and finishing feed in the last month (fodder vs. corn) on animal growth, carcass characteristics, meat quality, and fatty and amino acid profiles were studied using a randomized block design with initial weight as covariance. In total, 80 roosters (n = 30 of Sasso T-44 line and n = 50 of Mos breed) were used. They were separated by breed and allocated to 2 feeding treatment groups (concentrate and corn). Each feeding treatment group consisted of 15 and 25 roosters, for Sasso T-44 line and Mos breed, respectively. Finishing feeding did not affect growth parameters in the 2 genotypes of rooster tested (P > 0.05). Nonetheless, the comparison between both types of roosters led to significant differences in growth parameters (P 0.05) were found, and as expected, carcass weight clearly differed between genotypes due to the lower growth rate of Mos roosters. However, drumstick, thigh, and wing percentages were greater in the Mos breed than in the hybrid line. In color instrumental traits, roosters feeding with corn showed breast meat with significantly (P < 0.001) higher a* and b* values than those of cocks feeding with commercial fodder. Values of shear force were less than 2 kg for both genotypes, thus it can be classified as very tender meat. Finishing with corn significantly increased (P < 0.001) the polyunsaturated fatty acid content in the breast; the Mos breed had a polyunsaturated to saturated fatty acid ratio of 0.73. The amino acid profile of the indigenous breed was not similar to that of the commercial strain. Finishing feeding treatment had a greater influence than breed effect on amino acid profile.

  10. 21 CFR 137.255 - Bolted white corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bolted white corn meal. 137.255 Section 137.255... Flours and Related Products § 137.255 Bolted white corn meal. (a) Bolted white corn meal is the food prepared by so grinding and sifting cleaned white corn that: (1) Its crude fiber content is less than 1.2...

  11. Performance optimum analysis of an irreversible molten carbonate fuel cell–Stirling heat engine hybrid system

    International Nuclear Information System (INIS)

    Chen, Liwei; Zhang, Houcheng; Gao, Songhua; Yan, Huixian

    2014-01-01

    A new hybrid system mainly consists of a molten carbonate fuel cell (MCFC) and a Stirling heat engine is established, where the Stirling heat engine is driven by the high-quality waste heat generated in the MCFC. Based on the electrochemistry and non-equilibrium thermodynamics, analytical expressions for the efficiency and power output of the hybrid system are derived by taking various irreversible losses into account. It shows that the performance of the MCFC can be greatly enhanced by coupling a Stirling heat engine to further convert the waste heat for power generation. By employing numerical calculations, not only the influences of multiple irreversible losses on the performance of the hybrid system are analyzed, but also the impacts of some operating conditions such as the operating temperature, input gas compositions and operating pressure on the performance of the hybrid system are also discussed. The investigation method in the present paper is feasible for some other similar energy conversion systems as well. - Highlights: • A model of MCFC–Stirling heat engine hybrid system is established. • Analytical expressions for the efficiency and power output are derived. • MCFC performance can be greatly enhanced by coupling a Stirling heat engine. • Effects of some operating conditions on the performance are discussed. • Optimum operation regions are subdivided by multi-objective optimization method

  12. Development and field evaluation of an intercropping machine for corn and bean

    Directory of Open Access Journals (Sweden)

    A Mondani

    2016-09-01

    pulverizing lumps, mulching the surface and firming the underneath soil to provide a smooth uniform seedbed. In this study, the common bean seed (var. Derakhshan and corn hybrid seed (SC-704 with 93 and 83 percent of germination and 97 and 98 percent of purity, respectively, were used. This machine was operated in five different distance patterns between corn and bean seeds on each row: 55 mm and 215 mm in the first pattern, 85 mm and 185 mm in the second pattern, 110 mm and 150 mm in the third pattern, 130 mm and 120 mm in the fourth pattern, and 160 mm and 100 mm in the fifth pattern for corn and bean, respectively. For all patterns, the depth of planting for corn and bean seeds was chosen as 20, 40, and 60 mm. In addition, the forward speed was assumed to be constant (4 km h-1. By using split plots with three replicates and SAS software (2002, the results were analyzed. Results and Discussion The multiple index, miss index, precision index, and quality of feed index was evaluated. The analysis of variance for bean planting unit showed that difference distance between seeds and various planting depth were significantly higher for multiple index (P 0.05. The precision index was significant was affected by different levels of seeds distance (P 0.05. Conclusions The data suggested a higher quality index once corn and bean were respectively plated at 160 and 215 mm seed distance with a planting depth of 60 mm being optimum for each corn and bean.

  13. Effect of hydrolysis enzymatic process of corn using protease crude (Rhizopus oligosporus-C1) to produce corn hydrolisate rich folic acid

    Science.gov (United States)

    Maryati, Yati; Susilowati, Agustine; Melanie, Hakiki; Lotulung, Puspa D.

    2017-11-01

    Corn hydrolyzate (Zea mays L) as a functional food fortificant derived from natural folic acid has been evaluated through a hydrolysis process using protease enzyme Rhizopus oligosporus strain C1. Enzymatic hydrolysis was carried out on two types of corn; yellow and white pearl variety corn, at concentration of protease enzyme (rough) 0.025; 0.125; and 0.225% (v/w of soluble nixtamal corn protein) with a hydrolysis time of 24 h at 30 °C, and pH 5.0. The results showed that the concentration of protease enzymes can increase the folic acid to the optimum condition, from the beginning to the end of the process time. Folic acid optimization of hydrolysis results in each corn was at the concentration of protease enzyme 0.225% (v/w of soluble nixtamal corn protein) in white corn and yellow corn at 24 hours hydrolysis, with folic acid composition, 283.56 µg/mL and 412.52 µg/mL, 1.07 and 1.04 mg/mL of soluble proteins, proteolytic activity 2.09 and 2.06 U/mL, total solids of 21.74 and 17.85%, total sugars of 0.56 and 2.22 mg/mL, and reducing sugar 91.72 and 48.47 mg/mL. In this condition, the increase of optimum folic acid for white corn was 33.57% and for yellow corn was 71.60% after hydrolysis.

  14. Compositional variability of nutrients and phytochemicals in corn after processing.

    Science.gov (United States)

    Prasanthi, P S; Naveena, N; Vishnuvardhana Rao, M; Bhaskarachary, K

    2017-04-01

    The result of various process strategies on the nutrient and phytochemical composition of corn samples were studied. Fresh and cooked baby corn, sweet corn, dent corn and industrially processed and cooked popcorn, corn grits, corn flour and corn flakes were analysed for the determination of proximate, minerals, xanthophylls and phenolic acids content. This study revealed that the proximate composition of popcorn is high compared to the other corn products analyzed while the mineral composition of these maize products showed higher concentration of magnesium, phosphorus, potassium and low concentration of calcium, manganese, zinc, iron, copper, and sodium. Popcorn was high in iron, zinc, copper, manganese, sodium, magnesium and phosphorus. The xanthophylls lutein and zeaxanthin were predominant in the dent corn and the total polyphenolic content was highest in dent corn while the phenolic acids distribution was variable in different corn products. This study showed preparation and processing brought significant reduction of xanthophylls and polyphenols.

  15. 21 CFR 573.530 - Hydrogenated corn syrup.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Hydrogenated corn syrup. 573.530 Section 573.530... Additive Listing § 573.530 Hydrogenated corn syrup. (a) Identity. The product is produced by hydrogenation of corn syrup over a nickel catalyst. (b) Specifications. The product contains 70 percent...

  16. Field-to-Fuel Performance Testing of Lignocellulosic Feedstocks: An Integrated Study of the Fast Pyrolysis/Hydrotreating Pathway

    Energy Technology Data Exchange (ETDEWEB)

    Howe, Daniel T.; Westover, Tyler; Carpenter, Daniel; Santosa, Daniel M.; Emerson, Rachel; Deutch, Steve; Starace, Anne; Kutnyakov, Igor V.; Lukins, Craig D.

    2015-05-21

    Feedstock composition can affect final fuel yields and quality for the fast pyrolysis and hydrotreatment upgrading pathway. However, previous studies have focused on individual unit operations rather than the integrated system. In this study, a suite of six pure lignocellulosic feedstocks (clean pine, whole pine, tulip poplar, hybrid poplar, switchgrass, and corn stover) and two blends (equal weight percentages whole pine/tulip poplar/switchgrass and whole pine/clean pine/hybrid poplar) were prepared and characterized at Idaho National Laboratory. These blends then underwent fast pyrolysis at the National Renewable Energy Laboratory and hydrotreatment at Pacific Northwest National Laboratory. Although some feedstocks showed a high fast pyrolysis bio-oil yield such as tulip poplar at 57%, high yields in the hydrotreater were not always observed. Results showed overall fuel yields of 15% (switchgrass), 18% (corn stover), 23% (tulip poplar, Blend 1, Blend 2), 24% (whole pine, hybrid poplar) and 27% (clean pine). Simulated distillation of the upgraded oils indicated that the gasoline fraction varied from 39% (clean pine) to 51% (corn stover), while the diesel fraction ranged from 40% (corn stover) to 46% (tulip poplar). Little variation was seen in the jet fuel fraction at 11 to 12%. Hydrogen consumption during hydrotreating, a major factor in the economic feasibility of the integrated process, ranged from 0.051 g/g dry feed (tulip poplar) to 0.070 g/g dry feed (clean pine).

  17. Effect of salt stress on some sweet corn (Zea mays L. var. saccharata genotypes

    Directory of Open Access Journals (Sweden)

    Shtereva Lydia A.

    2015-01-01

    Full Text Available An experiment was carried out hydroponically under laboratory conditions to investigate the effect of salt stress on several physiological and biochemical parameters of three sweet corn (Zea mays L. var. saccharata genotypes: lines 6-13, C-6 (pollen source and their heterotic F1 hybrid “Zaharina”. The degree of salinity tolerance among these genotypes was evaluated at three different sodium chloride (NaCl concentrations: 0 mM, 100 mM, 125 mM and 150 mM. Seed germination, plant growth and biochemical stress determining parameters such as malondialdehyde (MDA, proline content and hydrogen peroxide (H2O2 levels were compared between seedlings of lines and hybrid. The obtained results indicated that both lines and hybrid have similar responses at different salinity levels for all examined traits. All the seedlings’ growth parameters, such as germination percentage, root length, shoot length, root and shoot fresh and dry weight, decreased with increasing salinity level. MDA, proline and H2O2 increased at different saline conditions in comparison to the control. Based on the results, of the three genotypes examined, the hybrid Zaharina, followed by line C-6, was more salt-sensitive than line 6-13 in salt stress condition.

  18. Corn gluten meal as a biodegradable matrix material in wood fibre reinforced composites

    International Nuclear Information System (INIS)

    Beg, M.D.H.; Pickering, K.L.; Weal, S.J.

    2005-01-01

    This study was undertaken to investigate corn gluten meal (CGM) as a biodegradable matrix material for wood fibre reinforced composites. CGM was used alone, as well as hybridized with polypropylene, and reinforced with radiata pine (Pinus Radiata) fibre using a twin-screw extruder followed by injection moulding. Tensile testing, scanning electron microscopy and differential scanning calorimetry were carried out to assess the composites. For composites from CGM and wood fibres, extrusion was carried out with the aid of the following plasticizers: octanoic acid, glycerol, polyethylene glycol and water. Windows of processability for the different plasticizers were obtained for all plasticizers. These were found to lie between 20 and 50 wt.% of plasticizer with a maximum of approximately 20% wood fibre reinforcement. The best mechanical properties were obtained with a matrix containing 10 wt.% octanoic acid and 30 wt.% water, which gave a tensile strength and Young's modulus of 18.7 MPa and 4 GPa, respectively. Hybrid matrix composites were compounded with a maleated polypropylene coupling agent and benzoyl peroxide as a cross-linking agent. The highest tensile strength and Young's modulus obtained from hybrid matrix composites were 36.9 MPa and 5.8 GPa with 50 wt.% fibre

  19. Low-airflow drying of fungicide-treated shelled corn

    International Nuclear Information System (INIS)

    Peterson, W.H.; Benson, P.W.

    1993-02-01

    Approved fungicides inhibit mold growth in shelled corn and allow for longer, natural-air drying. The longer drying periods permit lower than-normal airflows and smaller power units, thus reducing electrical demands on utilities in corn-producing states. Researchers placed approximately 67 m 3 (1900 bu) of one variety of shelled corn at approximately 24% moisture in each of five equally sized storage bins. They partitioned each bin vertically and filled one half of each bin with fungicide-treated corn and one half with untreated corn. Each of four bins used a different airflow. A fifth bin used the lowest of the four airflows but was equipped to capture and use solar energy. All corn dried rapidly with resulting good quality. The percentage of damaged kernels was significantly higher for untreated than for treated corn. The energy required for the lowest airflow system was approximately one half of that required for the higher, more traditional airflows. Because of lower-than-normal airflows, the electrical demand on the utility is approximately one fourth as great as that imposed when the higher, more traditional natural-air systems are used. The 1991 corn growing and drying seasons were unusual in central Illinois, the site of the study. Both harvest and drying occurred several weeks ahead of schedule. Additional work is needed to verify that findings hold true during more-normal Midwest corn growing and drying seasons; the investigators predict that they will. It should be noted that the fungicide used in this study has not yet been approved for widespread use in drying corn

  20. The effects of corn silk on glycaemic metabolism.

    Science.gov (United States)

    Guo, Jianyou; Liu, Tongjun; Han, Linna; Liu, Yongmei

    2009-11-23

    Corn silk contains proteins, vitamins, carbohydrates, Ca, K, Mg and Na salts, fixed and volatile oils, steroids such as sitosterol and stigmasterol, alkaloids, saponins, tannins, and flavonoids. Base on folk remedies, corn silk has been used as an oral antidiabetic agent in China for decades. However, the hypoglycemic activity of it has not yet been understood in terms of modern pharmacological concepts. The purpose of this study is to investigate the effects of corn silk on glycaemic metabolism. Alloxan and adrenalin induced hyperglycemic mice were used in the study. The effects of corn silk on blood glucose, glycohemoglobin (HbA1c), insulin secretion, damaged pancreatic beta-cells, hepatic glycogen and gluconeogenesis in hyperglycemic mice were studied respectively. After the mice were orally administered with corn silk extract, the blood glucose and the HbA1c were significantly decreased in alloxan-induced hyperglycemic mice (p corn silk extract 15 days later. Also, the body weight of the alloxan-induced hyperglycemic mice was increased gradually. However, ascension of blood glucose induced by adrenalin and gluconeogenesis induced by L-alanine were not inhibited by corn silk extract treatment (p > 0.05). Although corn silk extract increased the level of hepatic glycogen in the alloxan-induced hyperglycemic mice, there was no significant difference between them and that of the control group(p > 0.05). Corn silk extract markedly reduced hyperglycemia in alloxan-induced diabetic mice. The action of corn silk extract on glycaemic metabolism is not via increasing glycogen and inhibiting gluconeogenesis but through increasing insulin level as well as recovering the injured beta-cells. The results suggest that corn silk extract may be used as a hypoglycemic food or medicine for hyperglycemic people in terms of this modern pharmacological study.

  1. Improvement of two-stage GM refrigerator performance using a hybrid regenerator

    International Nuclear Information System (INIS)

    Ke, G.; Makuuchi, H.; Hashimoto, T.; Onishi, A.; Li, R.; Satoh, T.; Kanazawa, Y.

    1994-01-01

    To improve the performance of two-stage GM refrigerators, a hybrid regenerator with magnetic materials of Er 3 Ni and ErNi 0.9 Co 0.1 was used in the 2nd stage regenerator because of its large heat exchange capacity. The largest refrigeration capacity achieved with the hybrid regenerator was 0.95W at helium liquefied temperature of 4.2K. This capacity is 15.9% greater than the 0.82W refrigerator with only Er 3 Ni as the 2nd regenerator material. Use of the hybrid regenerator not only increases the refrigeration capacity at 4.2K, but also allows the 4K GM refrigerator to be used with large 1st stage refrigeration capacity, thus making it more practical

  2. Performance assessment of a hybrid electric-powered long-range commercial airliner

    OpenAIRE

    Zöld, Thomas

    2012-01-01

    Despite the recent increase in the amount of smaller electric general aviation aircrafts, a fully electric airliner is not likely to fly in the near future. Partially inspired by the automotive industry’s success with the hybrid car, this thesis investigated the feasibility of an electric-hybrid propulsion system for an Airbus A340-600 on a long-haul flight and its effect on the aircraft’s performance. First, an analysis was done of the reference aircraft, A340-600, using conventional propuls...

  3. Effect of combined xylanase and phytase on growth performance, apparent total tract digestibility, and carcass characteristics in growing pigs fed corn-based diets containing high-fiber coproducts.

    Science.gov (United States)

    Jang, Y D; Wilcock, P; Boyd, R D; Lindemann, M D

    2017-09-01

    Phytate has been shown to be an antinutrient, and the feeding of high levels of phytase can break down phytate to improve nutrient utilization and pig performance. Dietary xylanase targets arabinoxylan breakdown, thereby improving energy utilization in pigs. However, the effects of simultaneous supplementation have not been clearly determined. Crossbred pigs ( = 45; mean initial weight, 26.4 ± 0.2 kg) were allotted to 1 of 9 treatments to evaluate the effects of both xylanase (endo-1,4-β xylanase [EC 3.2.1.8]) and phytase (6-phytase [EC 3.1.3.26]) supplementation as follows: 1) positive control (PC), a corn-soybean meal-based diet with 15% corn distillers dried grains with solubles, 15% wheat middlings, and 13% corn germ meal; 2) negative control (NC), ME was reduced by 103 kcal/kg from the PC diet by replacement of fat with corn starch; 3) NC + phytase (500 phytase units (FTU)/kg diet); 4) NC + phytase (1,000 FTU/kg diet); 5) NC + phytase (2,000 FTU/kg diet); 6) NC + xylanase (24,000 xylanase units [BXU]/kg diet); 7) NC + phytase (500 FTU/kg diet) + xylanase (24,000 BXU/kg diet); 8) NC + phytase (1,000 FTU/kg diet) + xylanase (24,000 BXU/kg diet); and 9) NC + phytase (2,000 FTU/kg diet) + xylanase (24,000 BXU/kg diet). All diets were formulated to meet nutrient requirements before phytase and xylanase addition to the diets. There were no significant interactions between xylanase and phytase supplementation on growth performance, carcass characteristics, and apparent total tract digestibility (ATTD). The ADG ( phytase level increased. The ATTD of P increased as phytase supplementation level increased ( phytase level increased. Estimated carcass lean percentage and lean gain increased ( phytase level increased. Xylanase supplementation had no effect on growth performance, ATTD, and carcass characteristics. The results demonstrated an improved nutrient digestibility, performance, and carcass response to phytase supplementation beyond P provision because all diets

  4. 21 CFR 73.315 - Corn endosperm oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Corn endosperm oil. 73.315 Section 73.315 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.315 Corn endosperm oil. (a) Identity. (1) The color additive corn endosperm oil is a reddish-brown liquid composed chiefly of glycerides, fatty acids, sitosterols...

  5. Optical crop sensor for variable-rate nitrogen fertilization in corn: II - indices of fertilizer efficiency and corn yield

    Directory of Open Access Journals (Sweden)

    Jardes Bragagnolo

    2013-10-01

    Full Text Available Generally, in tropical and subtropical agroecosystems, the efficiency of nitrogen (N fertilization is low, inducing a temporal variability of crop yield, economic losses, and environmental impacts. Variable-rate N fertilization (VRF, based on optical spectrometry crop sensors, could increase the N use efficiency (NUE. The objective of this study was to evaluate the corn grain yield and N fertilization efficiency under VRF determined by an optical sensor in comparison to the traditional single-application N fertilization (TSF. With this purpose, three experiments with no-tillage corn were carried out in the 2008/09 and 2010/11 growing seasons on a Hapludox in South Brazil, in a completely randomized design, at three different sites that were analyzed separately. The following crop properties were evaluated: aboveground dry matter production and quantity of N uptake at corn flowering, grain yield, and vegetation index determined by an N-Sensor® ALS optical sensor. Across the sites, the corn N fertilizer had a positive effect on corn N uptake, resulting in increased corn dry matter and grain yield. However, N fertilization induced lower increases of corn grain yield at site 2, where there was a severe drought during the growing period. The VRF defined by the optical crop sensor increased the apparent N recovery (NRE and agronomic efficiency of N (NAE compared to the traditional fertilizer strategy. In the average of sites 1 and 3, which were not affected by drought, VRF promoted an increase of 28.0 and 41.3 % in NAE and NRE, respectively. Despite these results, no increases in corn grain yield were observed by the use of VRF compared to TSF.

  6. Performance of cotton leaf curl virus resistant intrahirsutum f/sub 1/ hybrids

    International Nuclear Information System (INIS)

    Baloch, M.J.

    2004-01-01

    The first and foremost effort to combat the devastating cotton leaf curl virus (clcv) disease would be to utilize those clcv resistant germplasm in a hybridization programme which can enhance the possibilities of selecting desirable progenies from segregating populations. In this connection, 16 clcv intrahirsutum F1 hybrids were developed and evaluated for their performance. The hybrids, on an average gave an increase of 26.02 % in seed cotton yield; 11.52 % in bolls per plant; 14.23 % in boll weight; 4.28 % in lint; 3.89 % in fibre length and 8.21 % in earliness against the average of parents. However, among the hybrids, the top three scoring for yield were, BH.121 x Cyto.9/91, Cyto.9/91 x CRIS-226 and VH-137 x CRIS-226. The number of bolls per plant was found to be a major contributing factor for increased yield because the hybrids which set higher bolls correspondingly gave higher yields. Boll weight was not regarded as an important attribute to increase yield because hybrids with moderate boll sizes were among the top three high yielders. For lint %, the hybrids CRIS-129 x LRA-5166 and FH-901 x VH-137 were first for fibre length, whereas CRIS-121 x Cyto.51 and BH-124 x CIM-448 were among the top two rankers. Regarding earliness, the hybrids CRIS-121 x Cyto. 51 gave the highest boll opening percent and next in order was the hybrid VH-137 x DNH-49. Our results thus generally suggest that although the best three hybrids were desirable for other traits, the choice of the hybrids may be made on the priority for characters to be bred. (author)

  7. Effect of hydrothermal treated corn flour addition on the quality of corn-field bean gluten-free pasta

    OpenAIRE

    Dib Ahlem; Wójtowicz Agnieszka; Benatallah Leila; Bouasla Abdallah; Zidoune Mohammed Nasreddine

    2018-01-01

    Corn semolina supplemented by field bean semolina in ratio of 2/1 (w/w) were used for obtaining protein and fiber enriched gluten-free pasta. The effect of hydrothermal treatment of corn flour on its applicability as gluten-free pasta improver was tested. A central composite design involving water hydration level and the amount of hydrothermal treated corn flour were used. Instrumental analyses of pasta (cooking loss, water absorption capacity, hydration and pasting properties, textural param...

  8. [Anaerobic co-digestion of corn stalk and vermicompost].

    Science.gov (United States)

    Chen, Guang-yin; Zheng, Zheng; Zou, Xing-xing; Fang, Cai-xia; Luo, Yan

    2010-02-01

    The characteristics of corn stalk digested alone at different total solid (TS) loading rates and co-digestion of various proportions of corn stalk and vermicompost were investigated by batch model at 35 degrees C +/- 1 degrees C. The organic loading rates (OLRs) studied were in the range of 1.2%-6.0% TS and increasing proportions of vermicompost from 20% to 80% TS. A maximum methane yield of corn stalk digested alone was 217.60 mL/g obtained at the TS loading rate of 4.8%. However, when the TS loading rate was 6.0%, the anaerobic system was acidified and the lowest pH value was 5.10 obtained on day 4 and the biogas productivity decreased. Furthermore, co-digestion of vermicompost and corn stalk in varying proportions were investigated at constant of 6.0% TS. Co-digestion with vermicompost improved the biodegradability of corn stalk and the methane yield was improved by 4.42%-58.61%, and led to higher pH values, higher volatile fatty acids (VFAs) concentration and lower alkalinity content compared with corn stalk digested alone. The maximum biogas yield and methane yield of 410.30 mL/g and 259. 35 mL/g were obtained for 40% vermicompost and 60% corn stalk respectively. Compared with corn stalk digested alone, co-digested with vermicompost didn' t affect methane content and the fermentation type, but promoted the destruction of crystalline of cellulose and the highest destruction rate was 29.36% for 40% vermicompost and 60% corn stalk. Therefore, adding vermicompost was beneficial for the decomposition and increasing the biotransformation rate of corn stalk.

  9. Effect of the corn breaking method on oil distribution between stillage phases of dry-grind corn ethanol production.

    Science.gov (United States)

    Wang, H; Wang, T; Johnson, L A; Pometto, A L

    2008-11-12

    The majority of fuel ethanol in the United States is produced by using the dry-grind corn ethanol process. The corn oil that is contained in the coproduct, distillers' dried grains with solubles (DDGS), can be recovered for use as a biodiesel feedstock. Oil removal will also improve the feed quality of DDGS. The most economical way to remove oil is considered to be at the centrifugation step for separating thin stillage (liquid) from coarse solids after distilling the ethanol. The more oil there is in the liquid, the more it can be recovered by centrifugation. Therefore, we studied the effects of corn preparation and grinding methods on oil distribution between liquid and solid phases. Grinding the corn to three different particle sizes, flaking, flaking and grinding, and flaking and extruding were used to break up the corn kernel before fermentation, and their effects on oil distribution between the liquid and solid phases were examined by simulating an industrial decanter centrifuge. Total oil contents were measured in the liquid and solids after centrifugation. Dry matter yield and oil partitioning in the thin stillage were highly positively correlated. Flaking slightly reduced bound fat. The flaked and then extruded corn meal released the highest amount of free oil, about 25% compared to 7% for the average of the other treatments. The freed oil from flaking, however, became nonextractable after the flaked corn was ground. Fine grinding alone had little effect on oil partitioning.

  10. Enhancing Corn Productivity through Application of Vermi Tea as Foliar Spray

    Directory of Open Access Journals (Sweden)

    Stephen P. Bulalin

    2015-12-01

    Full Text Available One of the major commodities in the Province of Apayao is corn. In the municipality of Conner, a previous study conducted showed that corn farmers heavily rely on the use of inorganic fertilizers and still produce low yield. This study was then conducted to compare traditional farming against the use of an intervention using Vermi Tea as supplemental spray. Results of this endeavor showed that the farms applied with supplemental organic spray performed better that that of the usual farmer’s practice in various aspects of corn growth and yield. Findings show that vermi tea, when used as a foliar spray can significantly improve the growth and yield of corn . Due to the presence of plant growth regulators, and its ability to improve the condition of the soil, the corn farm sprayed with vermi tea produced taller corn crops with longer and thicker ears. As reflected in this study, corn when applied with the vermi tea can have an increased yield which can go as high as two tons/ha. More importantly, vermi tea promotes the use of organic fertilizer which does not entail high cost and can be prepared using agricultural wastes and other locally available materials. This will not only contribute to the reduction of the amount of total waste but will also help minimize the use of chemical fertilizers. The technology intervention promoted in this project complements and supports various government agency thrusts and priorities which are geared towards improving the agriculture industry, maintaining environmental quality and sustainable use of resources, climate change adaptation and mitigation; and production of excellent researches that will promote quality education and contribute to the upliftment of the country and encourage multisectoral/ multidisciplinary research along the priority areas like food safety and security among others.

  11. Development of high performance hybrid rocket fuels

    Science.gov (United States)

    Zaseck, Christopher R.

    . In order to examine paraffin/additive combustion in a motor environment, I conducted experiments on well characterized aluminum based additives. In particular, I investigate the influence of aluminum, unpassivated aluminum, milled aluminum/polytetrafluoroethylene (PTFE), and aluminum hydride on the performance of paraffin fuels for hybrid rocket propulsion. I use an optically accessible combustor to examine the performance of the fuel mixtures in terms of characteristic velocity efficiency and regression rate. Each combustor test consumes a 12.7 cm long, 1.9 cm diameter fuel strand under 160 kg/m 2s of oxygen at up to 1.4 MPa. The experimental results indicate that the addition of 5 wt.% 30 mum or 80 nm aluminum to paraffin increases the regression rate by approximately 15% compared to neat paraffin grains. At higher aluminum concentrations and nano-scale particles sizes, the increased melt layer viscosity causes slower regression. Alane and Al/PTFE at 12.5 wt.% increase the regression of paraffin by 21% and 32% respectively. Finally, an aging study indicates that paraffin can protect air and moisture sensitive particles from oxidation. The opposed burner and aluminum/paraffin hybrid rocket experiments show that additives can alter bulk fuel properties, such as viscosity, that regulate entrainment. The general effect of melt layer properties on the entrainment and regression rate of paraffin is not well understood. Improved understanding of how solid additives affect the properties and regression of paraffin is essential to maximize performance. In this document I investigate the effect of melt layer properties on paraffin regression using inert additives. Tests are performed in the optical cylindrical combustor at ˜1 MPa under a gaseous oxygen mass flux of ˜160 kg/m2s. The experiments indicate that the regression rate is proportional to mu0.08rho 0.38kappa0.82. In addition, I explore how to predict fuel viscosity, thermal conductivity, and density prior to testing

  12. Hybridity, coping mechanisms, and academic performance management: Comparing three countries

    NARCIS (Netherlands)

    Teelken, J.C.

    2015-01-01

    Recent developments in the higher education sectors of the Netherlands, Sweden, and the UK concerning accountability and performance measurement in research have resulted in a variety of responses from individual academics. The concept of hybridity enables us to explain these developments over time.

  13. Improving the performance of a hybrid electric vehicle by utilization regenerative braking energy of vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Mourad, Mohamed [Automotive and Tractors Department, Faculty of Engineering, Minia University (Egypt)

    2011-07-01

    Environmentally friendly vehicles with range and performance capabilities surpassing those of conventional ones require a careful balance among competing goals for fuel efficiency, performance and emissions. It can be recuperated the energy of deceleration case of the vehicle to reuse it to recharge the storage energy of hybrid electric vehicle and increase the state of charge of batteries under the new conditions of vehicle operating in braking phase. Hybrid electric vehicle has energy storage which allows decreasing required peak value of power from prime mover, which is the internal combustion engine. The paper investigates the relationships between the driving cycle phases and the recuperation energy to the batteries system of hybrid electric vehicle. This work describes also a methodology for integrating this type of hybrid electric vehicle in a simulation program. A design optimization framework is then used to find the best position that we can utilize the recuperation energy to recharge the storage batteries of hybrid electric vehicle.

  14. Performance analysis of three-dimensional-triple-level cell and two-dimensional-multi-level cell NAND flash hybrid solid-state drives

    Science.gov (United States)

    Sakaki, Yukiya; Yamada, Tomoaki; Matsui, Chihiro; Yamaga, Yusuke; Takeuchi, Ken

    2018-04-01

    In order to improve performance of solid-state drives (SSDs), hybrid SSDs have been proposed. Hybrid SSDs consist of more than two types of NAND flash memories or NAND flash memories and storage-class memories (SCMs). However, the cost of hybrid SSDs adopting SCMs is more expensive than that of NAND flash only SSDs because of the high bit cost of SCMs. This paper proposes unique hybrid SSDs with two-dimensional (2D) horizontal multi-level cell (MLC)/three-dimensional (3D) vertical triple-level cell (TLC) NAND flash memories to achieve higher cost-performance. The 2D-MLC/3D-TLC hybrid SSD achieves up to 31% higher performance than the conventional 2D-MLC/2D-TLC hybrid SSD. The factors of different performance between the proposed hybrid SSD and the conventional hybrid SSD are analyzed by changing its block size, read/write/erase latencies, and write unit of 3D-TLC NAND flash memory, by means of a transaction-level modeling simulator.

  15. Capacidade de combinação entre linhagens de milho visando à produção de milho verde Combining ability of inbred lines of sweet corn

    Directory of Open Access Journals (Sweden)

    Fabricio Rodrigues

    2009-01-01

    specific combining ability (SCA in vegetable corn production. Eight inbred lines and 28 hybrids derived from them were evaluated in 2004/2005 season in two environments, in Lavras and Ijaci, State of Minas Gerais. A randomized complete block design with two replications per environment were used, and seven traits of agronomic and commercial interest for vegetable corn production were studied. The quadratic component of specific of combining ability (SCA was greater than the general combining ability (GCA for all the traits assessed. Non-additive genetic effects were more important than additive effects for genotypes variation, indicating that heterosis is important for hybrid selection for vegetable corn production. The inbred line L55 showed higher concentration of favorable alleles to the increase of traits PEC, PEE, MASSA, COR e COMP, being more suitable for the formation of new hybrid and the hybrids HS27, HS48 and HS24 accumulated a larger number of traits with SCA positive effect, significant and of high magnitude, indicating that those combinations presented better performance for all the traits, simultaneously, and can be recommended to the market for vegetable corn.

  16. ELASTICITY OF CORN PRICE TRANSMISION AND ITS IMPLICATION TO FARMERS

    Directory of Open Access Journals (Sweden)

    Ahmad Muslim

    2011-09-01

    Full Text Available Corn has important roles to Indonesian economy both for staple foods and for price transmission to other products. The high domestic demand for corn compared to its domestic production has made corn imports continue to grow. This research is aimed to know the elasticity of price transmission and its implication to corn’s farmers. The results of analysis show that corn price transmission is inelastic. The coefficient shows that corn market is oligopsony under the imperfect competition market. To help the corn farmers, the government has to provide fertilizer subsidy and farm credit with low interest rates, as well as impose import tariff on corn. Keywords: Corn, Elasticity of price transmission, oligopsony, imperfect competition marketJEL classification numbers: Q00, Q12, Q18

  17. Evaluating different interrow distance between corn and soybean for optimum growth, production and nutritive value of intercropped forages.

    Science.gov (United States)

    Kim, Jeongtae; Song, Yowook; Kim, Dong Woo; Fiaz, Muhammad; Kwon, Chan Ho

    2018-01-01

    Maize fodder is being used as staple feed for livestock but it lacks protein and essential amino acids; lysine and tryptophan. Intercropping maize with leguminous soybean crop is promising technique under limited land resources of South Korea but it can only give considerable advantages when adequate distance is provided between corn and soybean rows. Main aim of present study was to find-out adequate distance between corn and soybean seeding rows for optimum growth, yield and nutritive value of intercropped forage. Different interrow distances between corn and soybean were evaluated under four treatments, viz. 1) Corn sole as positive control treatment 2) Zero cm between corn and soybean (control); 2) Five cm between corn and soybean; 3) 10 cm between corn and soybean, with three replicates under randomized block design. Findings depicted that height and number of corn stalks and ears were similar ( P  > 0.05) among different treatments. Numerically average corn ear height was decreased at zero cm distance. Dry matter percentage in all components; corn stalk, corn ear and soybean was also found not different ( P  > 0.05) but dry matter yield in component of corn ear was lower ( P  value, total digestible nutrient yield in intercropped corn was also found lower ( P  value of forage at wider interrow distance i.e. 5 cm between corn and soybean might be due to adequate interseed distance. Conclusively, pattern of corn and soybean seeding in rows at 5 cm distance was found suitable which provided adequate interrow distance to maintain enough mutual cooperation and decreased competition between both species for optimum production performance and nutritive value of intercropped forage.

  18. Development of eggplant hybrid cultivar ‘BATEM FILIZI’ and determination of yield performance

    Directory of Open Access Journals (Sweden)

    Hatice Filiz BOYACI

    2014-12-01

    Full Text Available Eggplant (Solanum melongena L. cultivation is an important part of vegetable production in Turkey. It is highly affected by abiotic stress factors such as low temperatures during growth and development. The present study was aimed to improve new hybrid varieties with high quality and fruit setting under undesirable environmental conditions in eggplant. The 39 inbred lines were developed from eggplant genepool by using pedigree breeding method at the Bati Akdeniz Agricultural Research Institute. They were characterized morphologically and evaluated for phylogenetic relationship among them. Selected seven lines were crossed each other to obtain F1 hybrids. Thirteen hybrids from these crosses were examined for their rate of heterosis and heterobeltiosis. These hybrids were not suitable for market demands although F1 hybrids including P350 as parental line had high heterosis rate. Oval fruit shaped P350 inbred line as female parent showed good performance and crossed with long fruit shaped P599 inbred line. The resultant F1 hybrid cultivar higher yielding, suitable for production under greenhouse and highly adaptable was registered with the name of BATEM FILIZI. It is recommended that this hybrid can be used in greenhouse production especially in single crop season.

  19. The effects of corn silk on glycaemic metabolism

    Directory of Open Access Journals (Sweden)

    Han Linna

    2009-11-01

    Full Text Available Abstract Background Corn silk contains proteins, vitamins, carbohydrates, Ca, K, Mg and Na salts, fixed and volatile oils, steroids such as sitosterol and stigmasterol, alkaloids, saponins, tannins, and flavonoids. Base on folk remedies, corn silk has been used as an oral antidiabetic agent in China for decades. However, the hypoglycemic activity of it has not yet been understood in terms of modern pharmacological concepts. The purpose of this study is to investigate the effects of corn silk on glycaemic metabolism. Methods Alloxan and adrenalin induced hyperglycemic mice were used in the study. The effects of corn silk on blood glucose, glycohemoglobin (HbA1c, insulin secretion, damaged pancreatic β-cells, hepatic glycogen and gluconeogenesis in hyperglycemic mice were studied respectively. Results After the mice were orally administered with corn silk extract, the blood glucose and the HbA1c were significantly decreased in alloxan-induced hyperglycemic mice (p 0.05. Although corn silk extract increased the level of hepatic glycogen in the alloxan-induced hyperglycemic mice, there was no significant difference between them and that of the control group(p > 0.05. Conclusion Corn silk extract markedly reduced hyperglycemia in alloxan-induced diabetic mice. The action of corn silk extract on glycaemic metabolism is not via increasing glycogen and inhibiting gluconeogenesis but through increasing insulin level as well as recovering the injured β-cells. The results suggest that corn silk extract may be used as a hypoglycemic food or medicine for hyperglycemic people in terms of this modern pharmacological study.

  20. Prediction of County-Level Corn Yields Using an Energy-Crop Growth Index.

    Science.gov (United States)

    Andresen, Jeffrey A.; Dale, Robert F.; Fletcher, Jerald J.; Preckel, Paul V.

    1989-01-01

    Weather conditions significantly affect corn yields. while weather remains as the major uncontrolled variable in crop production, an understanding of the influence of weather on yields can aid in early and accurate assessment of the impact of weather and climate on crop yields and allow for timely agricultural extension advisories to help reduce farm management costs and improve marketing, decisions. Based on data for four representative countries in Indiana from 1960 to 1984 (excluding 1970 because of the disastrous southern corn leaf blight), a model was developed to estimate corn (Zea mays L.) yields as a function of several composite soil-crop-weather variables and a technology-trend marker, applied nitrogen fertilizer (N). The model was tested by predicting corn yields for 15 other counties. A daily energy-crop growth (ECG) variable in which different weights were used for the three crop-weather variables which make up the daily ECG-solar radiation intercepted by the canopy, a temperature function, and the ratio of actual to potential evapotranspiration-performed better than when the ECG components were weighted equally. The summation of the weighted daily ECG over a relatively short period (36 days spanning silk) was found to provide the best index for predicting county average corn yield. Numerical estimation results indicate that the ratio of actual to potential evapotranspiration (ET/PET) is much more important than the other two ECG factors in estimating county average corn yield in Indiana.

  1. Performance of a hybrid hydrogen–gasoline engine under various operating conditions

    International Nuclear Information System (INIS)

    Ji, Changwei; Wang, Shuofeng; Zhang, Bo

    2012-01-01

    Highlights: ► We develop a combustion strategy for the hybrid hydrogen–gasoline engine (HHGE). ► The HHGE produced much lower HC and CO emissions at cold start. ► The H 2 -gasoline blends were effective for improving engine performance at idle and part loads. ► The HHGE could run smoothly at lean conditions. -- Abstract: This paper proposed a new combustion strategy for the spark-ignited (SI) engines. A gasoline engine was converted into a hybrid hydrogen–gasoline engine (HHGE) by adding a hydrogen injection system and a hybrid electronic control unit. Different from the conventional gasoline and hydrogen–enriched gasoline engines, the HHGE is fueled with the pure hydrogen at cold start to produce almost zero emissions, with the hydrogen–gasoline blends at idle and part loads to further improve thermal efficiency and reduce emissions, and with the pure gasoline to ensure the engine power output at high loads. Because the HHGE is fueled with the pure gasoline at high loads and speeds, experiments are only conducted at clod start, idle and part load conditions. Since lean combustion avails the further improvement of the engine performance, the HHGE was fueled with the lean mixtures in all tests. The experimental results showed that the hybrid hydrogen–gasoline engine was started successfully with the pure hydrogen, which produced 94.7% and 99.5% reductions in HC and CO emissions within 100 s from the onset of the cold start, compared with the original gasoline engine. At an excess air ratio of 1.37 and idle conditions, indicated thermal efficiency of the 3% hydrogen–blended gasoline engine was 46.3% higher than that of the original engine. Moreover, the engine cyclic variation was eased, combustion duration was shortened and HC, CO and NOx emissions were effectively reduced for the hybrid hydrogen–gasoline engines.

  2. Visual responses of corn silk flies (Diptera: Ulidiidae)

    Science.gov (United States)

    Corn silk flies are major pests impacting fresh market sweet corn production in Florida and Georgia. Control depends solely on well-times applications of insecticides to protect corn ear development. Surveillance depends on visual inspection of ears with no effective trapping methods currently ava...

  3. Nonrenewable energy cost of corn-ethanol in China

    International Nuclear Information System (INIS)

    Yang, Q.; Chen, G.Q.

    2012-01-01

    Nonrenewable energy cost is accounted for the believed renewable biofuel of corn-ethanol in China. By a process-based energy analysis, nonrenewable energy cost in the corn-ethanol production process incorporating agricultural crop production, industrial conversion and wastewater treatment is conservatively estimated as 1.70 times that of the ethanol energy produced, corresponding to a negative energy return in contrast to the positive ones previously reported. Nonrenewable energy cost associated with wastewater treatment usually ignored in previous researches is shown important in the energy balance. Denoting the heavy nonrenewability of the produced corn-ethanol, the calculated nonrenewable energy cost would rise to 3.64 folds when part of the nonrenewable energy cost associated with water consumption, transportation and environmental remediation is included. Due to the coal dominated nonrenewable energy structure in China, corn-ethanol processes in China are mostly a conversion of coal to ethanol. Validations and discussions are also presented to reveal policy implications against corn based ethanol as an alternative energy in long term energy security planning. - Highlights: ► Nonrenewable energy (NE) cost is conservatively accounted for corn-ethanol in China. ► Corn cultivation, ethanol conversion and wastewater treatment are included. ► NE cost is estimated as 1.70 times that of the ethanol energy produced. ► Corn-ethanol processes in China are mostly a conversion of coal to ethanol.

  4. Hybrid competitive strategies, organizational structure, and firm performance

    OpenAIRE

    Pertusa Ortega, Eva María

    2008-01-01

    Comunicación presentada en SMS 28th Annual International Conference, Cologne, Germany, October 12-15, 2008. This paper analyzes the internal characteristics of organizational structure which have an influence on the development of hybrid competitive strategies and their link to firm performance. The study examines a sample of large Spanish firms belonging to different sectors by means of the Partial Least Squares (PLS) technique, using formative dimensions for competitive strategy and orga...

  5. Enzymatic hydrolysis of corn bran arabinoxylan

    DEFF Research Database (Denmark)

    Agger, Jane

    as a model substrate because it represents a readily available agroindustrial side product with upgrading potentials. Corn bran originates from the wet-milling process in corn starch processing, is the outmost layers of the corn kernel and is particularly rich in pentose monosaccharides comprising the major...... in a complex and ridig cell wall structure. This thesis contains a thorough examination of the monosaccharide and structural composition of corn bran, which is used to assess and apply the relevant mono component enzyme preparations. In this way, the aim is to obtain the most effective minimal enzymatic......, especially with respect to xylose and glucose release, but vast amounts of the valuable monosaccharides are lost during this pretreatment and this is especially evident for arabinose. From a scientific point of view acid catalysed pretreatment renders the substrate in a state of disruption where assessment...

  6. Apomixis: Engineering the Ability to Harness Hybrid Vigor in Crop Plants.

    Science.gov (United States)

    Conner, Joann A; Ozias-Akins, Peggy

    2017-01-01

    Apomixis, commonly defined as asexual reproduction through seed, is a reproductive trait that occurs in only a few minor crops, but would be highly valuable in major crops. Apomixis results in seed-derived progenies that are genetically identical to their maternal parent. The advantage of apomixis would lie in seed propagation of elite food, feed, and biofuel crops that are heterozygous such as hybrid corn and switchgrass or self-pollinating crops for which no commercial-scale hybrid production system is available. While hybrid plants often outperform parental lines in growth and higher yields, production of hybrid seed is accomplished through carefully controlled, labor intensive crosses. Both small farmers in developing countries who produce their own seed and commercial companies that market hybrid seed could benefit from the establishment of engineered apomixis in plants. In this chapter, we review what has been learned from studying natural apomicts and mutations in sexual plants leading to apomixis-like development, plus discuss how the components of apomixis could be successfully engineered in plants.

  7. Development, survival and fitness performance of Helicoverpa zea (Lepidoptera: Noctuidae) in MON810 Bt field corn.

    Science.gov (United States)

    Horner, T A; Dively, G P; Herbert, D A

    2003-06-01

    Helicoverpa zea (Boddie) development, survival, and feeding injury in MON810 transgenic ears of field corn (Zea mays L.) expressing Bacillus thuringiensis variety kurstaki (Bt) Cry1Ab endotoxins were compared with non-Bt ears at four geographic locations over two growing seasons. Expression of Cry1Ab endotoxin resulted in overall reductions in the percentage of damaged ears by 33% and in the amount of kernels consumed by 60%. Bt-induced effects varied significantly among locations, partly because of the overall level and timing of H. zea infestations, condition of silk tissue at the time of egg hatch, and the possible effects of plant stress. Larvae feeding on Bt ears produced scattered, discontinuous patches of partially consumed kernels, which were arranged more linearly than the compact feeding patterns in non-Bt ears. The feeding patterns suggest that larvae in Bt ears are moving about sampling kernels more frequently than larvae in non-Bt ears. Because not all kernels express the same level of endotoxin, the spatial heterogeneity of toxin distribution within Bt ears may provide an opportunity for development of behavioral responses in H. zea to avoid toxin. MON810 corn suppressed the establishment and development of H. zea to late instars by at least 75%. This level of control is considered a moderate dose, which may increase the risk of resistance development in areas where MON810 corn is widely adopted and H. zea overwinters successfully. Sublethal effects of MON810 corn resulted in prolonged larval and prepupal development, smaller pupae, and reduced fecundity of H. zea. The moderate dose effects and the spatial heterogeneity of toxin distribution among kernels could increase the additive genetic variance for both physiological and behavioral resistance in H. zea populations. Implications of localized population suppression are discussed.

  8. 21 CFR 137.290 - Self-rising yellow corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Self-rising yellow corn meal. 137.290 Section 137... Cereal Flours and Related Products § 137.290 Self-rising yellow corn meal. Self-rising yellow corn meal conforms to the definition and standard of identity prescribed by § 137.270 for self-rising white corn meal...

  9. 21 CFR 137.270 - Self-rising white corn meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Self-rising white corn meal. 137.270 Section 137... Cereal Flours and Related Products § 137.270 Self-rising white corn meal. (a) Self-rising white corn meal is an intimate mixture of white corn meal, sodium bicarbonate, and one or both of the acid-reacting...

  10. Quantitative analysis of allantoin in Iranian corn silk

    OpenAIRE

    E. Khanpour*; M. Modarresi

    2017-01-01

    Background and objectives: Zea mays is cultivated in different parts of Iran and corn silk is used in traditional medicine. Allantoin is one of the major compounds in corn silk. The purpose of this research was the quantitatve analysis of allantoin in corn silks belonging to several regions of Iran. Methods: The samples of corn silk were prepared from three provinces of Iran (Kermanshah, Fars and Razavi Khorasan). The dried plant materials were infused in boiling distilled water with a temper...

  11. Detoxification of corn stover and corn starch pyrolysis liquors by ligninolytic enzymes of Phanerochaete chrysosporium.

    Science.gov (United States)

    Khiyami, Mohammad A; Pometto, Anthony L; Brown, Robert C

    2005-04-20

    Phanerochaete chrysosporium (ATCC 24725) shake flask culture with 3 mM veratryl alcohol addition on day 3 was able to grow and detoxify different concentrations of diluted corn stover (Dcs) and diluted corn starch (Dst) pyrolysis liquors [10, 25, and 50% (v/v)] in defined media. GC-MS analysis of reaction products showed a decrease and change in some compounds. In addition, the total phenolic assay with Dcs samples demonstrated a decrease in the phenolic compounds. A bioassay employing Lactobacillus casei growth and lactic acid production was developed to confirm the removal of toxic compounds from 10 and 25% (v/v) Dcs and Dst by the lignolytic enzymes, but not from 50% (v/v) Dcs and Dst. The removal did not occur when sodium azide or cycloheximide was added to Ph. chrysosporium culture media, confirming the participation of lignolytic enzymes in the detoxification process. A concentrated enzyme preparation decreased the phenolic compounds in 10% (v/v) corn stover and corn starch pyrolysis liquors to the same extent as the fungal cultures.

  12. A practical method for extending the biuret assay to protein determination of corn-based products.

    Science.gov (United States)

    Liu, Zelong; Pan, Junhui

    2017-06-01

    A modified biuret method suitable for protein determination of corn-based products was developed by introducing a combination of an alkaline reagent with sodium dodecyl sulfate (reagent A) and heat treatments. The method was tested on seven corn-based samples. The results showed mostly good agreement (P>0.05) as compared to the Kjeldahl values. The proposed method was found to enhance the accuracy of prediction on zein content using bovine serum albumin as standard. Reagent A and sample treatment were proved to effectively improve protein solubilization for the thermally-dried corn-based products, e.g. corn gluten meal. The absorbance was stable for at least 1-h. Moreover, the whole measurement of protein content only needs 15-20min more than the traditional biuret assay, and can be performed in batches. The findings suggest that the proposed method could be a timesaving alternative for routine protein analyses in corn processing factories. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Effect of Different Structural Materials on Neutronic Performance of a Hybrid Reactor

    Science.gov (United States)

    Übeyli, Mustafa; Tel, Eyyüp

    2003-06-01

    Selection of structural material for a fusion-fission (hybrid) reactor is very important by taking into account of neutronic performance of the blanket. Refractory metals and alloys have much higher operating temperatures and neutron wall load (NWL) capabilities than low activation materials (ferritic/martensitic steels, vanadium alloys and SiC/SiC composites) and austenitic stainless steels. In this study, effect of primary candidate refractory alloys, namely, W-5Re, T111, TZM and Nb-1Zr on neutronic performance of the hybrid reactor was investigated. Neutron transport calculations were conducted with the help of SCALE 4.3 System by solving the Boltzmann transport equation with code XSDRNPM. Among the investigated structural materials, tantalum had the worst performance due to the fact that it has higher neutron absorption cross section than others. And W-5Re and TZM having similar results showed the best performance.

  14. Corn residue utilization by livestock in the USA

    Science.gov (United States)

    Corn (Zea mays L.) residue grazing or harvest provides a simple and economical practice to integrate crops and livestock. Limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA-ERS surveyed producers from 19 states on corn grain ...

  15. Production of ethanol and furfural from corn stover

    Science.gov (United States)

    Corn stover has potential for economical production of biofuels and value-added chemicals. The conversion of corn stover to sugars involves pretreatment and enzymatic hydrolysis. We have optimized hydrothermal, dilute H2SO4 and dilute H3PO4 pretreatments of corn stover for enzymatic saccharificati...

  16. Gas-Transport-Property Performance of Hybrid Carbon Molecular Sieve−Polymer Materials

    KAUST Repository

    Das, Mita; Perry, John D.; Koros, William J.

    2010-01-01

    agglomeration and residual stress, were addressed in this work, and subsequently a new membrane formation technique was developed to produce high-performing membranes. The successfully improved interfacial region of the hybrid membranes allows the sieves

  17. Performance Analysis of High-Speed Deep/Shallow Recessed Hybrid Bearing

    Directory of Open Access Journals (Sweden)

    Lei Wang

    2013-01-01

    Full Text Available The present paper proposes a theoretical analysis of the performance of deep/shallow recessed hybrid bearing. It is intended that, on the basis of the numerical results drawn from this study, appropriate shallow recess depth and width can be determined for use in the bearing design process. By adopting bulk flow theory, the turbulent Reynolds equation and energy equation are modified and solved numerically including concentrated inertia effects at the recess edge with different depth and width of shallow recess. The results indicate that the load capacity, drag torque increases as the depth of shallow recess is shallower and the width ratio (half angle of deep recess versus half angle of shallow recess is smaller. In contrast, the flow rate decreases as the depth of shallow recess is shallower and the width ratio is smaller. Nevertheless, the appropriate design of the depth and width of shallow recess might well induce the performance of high-speed deep/shallow recessed hybrid bearing.

  18. Effect of irradiation on sweet corn preservation

    International Nuclear Information System (INIS)

    Fu Junjie

    2002-01-01

    60 Co γ-ray was used to irradiate newly-harvested sweet corn and the results showed that the effects of irradiation on soluble solids, sucrose, starch and total sugar were not significant. The viscosity of starch decreased with the increasing of irradiation dose. The preservation duration of irradiated sweet corn was 7 days longer than that of CK, and the sweet, smell, taste of sweet corn had no abnormal change

  19. Imaging corn plants with PhytoPET, a modular PET system for plant biology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.; Kross, B.; McKisson, J.; McKisson, J. E.; Weisenberger, A. G.; Xi, W.; Zorn, C.; Bonito, G.; Howell, C. R.; Reid, C. D.; Crowell, A.; Cumberbatch, L. C.; Topp, C.; Smith, M. F.

    2013-11-01

    PhytoPET is a modular positron emission tomography (PET) system designed specifically for plant imaging. The PhytoPET design allows flexible arrangements of PET detectors based on individual standalone detector modules built from single Hamamatsu H8500 position sensitive photomultiplier tubes and pixelated LYSO arrays. We have used the PhytoPET system to perform preliminary corn plant imaging studies at the Duke University Biology Department Phytotron. Initial evaluation of the PhytoPET system to image the biodistribution of the positron emitting tracer {sup 11}C in corn plants is presented. {sup 11}CO{sub 2} is loaded into corn seedlings by a leaf-labeling cuvette and translocation of {sup 11}C-sugars is imaged by a flexible arrangement of PhytoPET modules on each side. The PhytoPET system successfully images {sup 11}C within corn plants and allows for the dynamic measurement of {sup 11}C-sugar translocation from the leaf to the roots.

  20. Intraear Compensation of Field Corn, Zea mays, from Simulated and Naturally Occurring Injury by Ear-Feeding Larvae.

    Science.gov (United States)

    Steckel, S; Stewart, S D

    2015-06-01

    Ear-feeding larvae, such as corn earworm, Helicoverpa zea Boddie (Lepidoptera: Noctuidae), can be important insect pests of field corn, Zea mays L., by feeding on kernels. Recently introduced, stacked Bacillus thuringiensis (Bt) traits provide improved protection from ear-feeding larvae. Thus, our objective was to evaluate how injury to kernels in the ear tip might affect yield when this injury was inflicted at the blister and milk stages. In 2010, simulated corn earworm injury reduced total kernel weight (i.e., yield) at both the blister and milk stage. In 2011, injury to ear tips at the milk stage affected total kernel weight. No differences in total kernel weight were found in 2013, regardless of when or how much injury was inflicted. Our data suggested that kernels within the same ear could compensate for injury to ear tips by increasing in size, but this increase was not always statistically significant or sufficient to overcome high levels of kernel injury. For naturally occurring injury observed on multiple corn hybrids during 2011 and 2012, our analyses showed either no or a minimal relationship between number of kernels injured by ear-feeding larvae and the total number of kernels per ear, total kernel weight, or the size of individual kernels. The results indicate that intraear compensation for kernel injury to ear tips can occur under at least some conditions. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  1. Compositional analysis of genetically modified corn events (NK603, MON88017×MON810 and MON89034×MON88017) compared to conventional corn.

    Science.gov (United States)

    Rayan, Ahmed M; Abbott, Louise C

    2015-06-01

    Compositional analysis of genetically modified (GM) crops continues to be an important part of the overall evaluation in the safety assessment for these materials. The present study was designed to detect the genetic modifications and investigate the compositional analysis of GM corn containing traits of multiple genes (NK603, MON88017×MON810 and MON89034×MON88017) compared with non-GM corn. Values for most biochemical components assessed for the GM corn samples were similar to those of the non-GM control or were within the literature range. Significant increases were observed in protein, fat, fiber and fatty acids of the GM corn samples. The observed increases may be due to the synergistic effect of new traits introduced into corn varieties. Furthermore, SDS-PAGE analysis showed high similarity among the protein fractions of the investigated corn samples. These data indicate that GM corn samples were compositionally equivalent to, and as nutritious as, non-GM corn. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Avaliação da silagem de diferentes híbridos de milho (Zea mays, L. por meio do desempenho de bezerros confinados em fase de crescimento Evaluation of silages of different corn hybrids (Zea mays, L. by feedlot performance of calves, during the growing phase

    Directory of Open Access Journals (Sweden)

    Joilmaro Rodrigo Pereira Rosa

    2004-08-01

    Full Text Available Objetivou-se avaliar, por meio do desempenho animal, silagens de três híbridos de milho (Zea mays, L.: Agroceres AG-5011, Braskalb XL-344 e Cargill C-806. Foram utilizados 27 machos, não-castrados, mestiços Nelore x Charolês, com idade média de 10 meses e peso médio inicial de 252 kg, confinados durante 84 dias, subdivididos em quatro períodos de 21 dias. As silagens dos híbridos testados corresponderam a 70% da matéria seca ofertada. Não houve interação do híbrido de milho testado com o período de avaliação em confinamento, para os parâmetros estudados. A dieta que incluiu a silagem do híbrido AG-5011 resultou em maior consumo voluntário médio diário de matéria seca, expresso por 100 kg de peso vivo e tamanho metabólico, e maior consumo médio diário de fibra em detergente ácido, expresso nas diferentes formas, em relação aos híbridos XL-344 e C-806, que, por sua vez, foram semelhantes entre si. As dietas que incluíram silagens dos híbridos AG-5011, XL-344 e C-806 apresentaram semelhanças quanto ao consumo voluntário de matéria seca, expresso em kg/animal/dia (6,73; 6,05; e 6,19, consumo médio diário de FDN, em kg/dia (3,054; 2,837; e 2,836, e energia digestível, expressa nas diferentes formas, ganho de peso médio diário, em kg/dia (1,283; 1,219; e 1,249, ganho em estado corporal, conversão alimentar (5,26; 4,98; e 4,97 e eficiência energética (14,02; 13,68; e 13,21. Os três híbridos são indicados como materiais genéticos de muito boa qualidade para produção de silagem, promovendo ganhos de peso diário superior a 1,2 kg/animal/dia, quando utilizados em dietas com relação volumoso:concentrado de 70:30.The objective of the experiment was to evaluate, through feedlot performance of calves, three corn hybrids (Zea mays, L.: Agroceres AG-5011, Braskalb XL-344 and Cargill C-806. For the evaluation, 27 Nellore x Charolais non-castrated crossbred males with average age of 10 months and average initial

  3. Renewable corn-ethanol and energy security

    International Nuclear Information System (INIS)

    Eaves, James

    2007-01-01

    Though corn-ethanol is promoted as renewable, models of the production process assume fossil fuel inputs. Moreover, ethanol is promoted as a means of increasing energy security, but there is little discussion of the dependability of its supply. This study investigates the sensibility of promoting corn-ethanol as an automobile fuel, assuming a fully renewable production process. We then use historical data to estimate the supply risk of ethanol relative to imported petroleum. We find that devoting 100% of US corn to ethanol would displace 3.5% of gasoline consumption and the annual supply of the ethanol would be inherently more risky than that of imported oil. Finally, because large temperature increases can simultaneously increase fuel demand and the cost of growing corn, the supply responses of ethanol producers to temperature-induced demand shocks would likely be weaker than those of gasoline producers. (author)

  4. Digestibility and performance of steers fed low-quality crop residues treated with calcium oxide to partially replace corn in distillers grains finishing diets.

    Science.gov (United States)

    Shreck, A L; Nuttelman, B L; Harding, J L; Griffin, W A; Erickson, G E; Klopfenstein, T J; Cecava, M J

    2015-02-01

    Two studies were conducted to identify methods for treating crop residues to improve digestibility and value in finishing diets based on corn grain and corn wet distillers grain with solubles (WDGS). In Exp. 1, 336 yearling steers (initial BW 356 ± 11.5 kg) were used in a 2 × 3 + 1 factorial arrangement of treatments with 6 pens per treatment. Factors were 3 crop residues (corn cobs, wheat straw, and corn stover) and 2 treatments where crop residues were either fed (20% diet DM) in their native form (NT) or alkaline treated with 5% CaO (DM basis) and hydrated to 50% DM before anaerobic storage (AT). Intakes were not affected by diet (F test; P = 0.30). An interaction between chemical treatment and residue (P 0.10) was observed between control (46% corn; DM basis) and AT (31% corn; DM basis) for DM digestibility (70.7% vs. 73.7%) or OM digestibility (72.1% vs. 77.0%). Dry matter intakes were not different between treated and untreated diets (P = 0.38), but lower (P < 0.01) NDF intake was observed for treated diets (3.1 vs. 3.5 kg/d), suggesting that CaO treatment was effective in solubilizing some carbohydrate. These data suggest that 15% replacement of corn and 10% untreated residue with treated forage result in a nutrient supply of OM similar to that of the control. The improvements in total tract fiber digestibility that occurred when treated forages were fed may have been related to increased digestibility of recoverable NDF and not to increased ruminal pH. Feeding chemically treated crop residues and WDGS is an effective strategy for replacing a portion of corn grain and roughage in feedlot diets.

  5. Dynamic performance of self-operated three-way valve used in a hybrid air conditioner

    International Nuclear Information System (INIS)

    Zhang, Penglei; Zhou, Dehai; Shi, Wenxing; Li, Xianting; Wang, Baolong

    2014-01-01

    A hybrid air conditioner combining a thermosyphon cycle with a vapor compression refrigeration cycle has a large energy saving potential compared with a common air conditioner for spaces requiring year-round cooling. The performance of the switch between the vapor compression mode and the thermosyphon mode largely impacts the safety and reliability of hybrid air conditioners. Therefore, a self-operated three-way valve is proposed. A thermodynamic model and a kinetic model are developed in this paper to evaluate the dynamic performance of the switch valve. The effects of the spring force constant, compressor discharging volume, fit clearance and piston length on the dynamic performance of the switch valve are analyzed. In conclusion, the proposed self-operated three-way valve can realize the switch operation accurately. - Highlights: •A self-operated three-way valve is proposed for hybrid air conditioners. •The thermodynamic model and kinetic model of the self-operated three-way valve are developed. •The validity of models is verified by experiments. •Effects of four main design parameters on the operating performance of the valve are researched

  6. Combining Performance and Flexibility for RMS with a Hybrid Architecture

    NARCIS (Netherlands)

    Dennis Koole; Arjan Groenewegen; Daniël Telgen; Patrick Wit; Leo van Moergestel; Arjan van Zanten; John-Jules Meyer; Ing. Erik Puik; Dick van der Steen; Pascal Muller

    2013-01-01

    Author supplied Combining Performance and Flexibility for RMS with a Hybrid Architecture Dani¨el Telgen 12? , Leo van Moergestel 1 , Erik Puik 1 , Pascal Muller 1 , Arjan Groenewegen 1 , Dick van der Steen 1 , Dennis Koole 1 , Patrick de Wit 1 , Arjen van Zanten 1 , and John-Jules

  7. EFFICIENCY OF THE CHEMICAL TREATMENT AGAINST THE EUROPEAN CORN BORER IN SEED MAIZE PRODUCTION

    Directory of Open Access Journals (Sweden)

    Emilija Raspudić

    2013-06-01

    Full Text Available The aim of this study was to determine the effectiveness of a chemical treatment against larvae of the European corn borer (Ostrinia nubilalis Hubner. The experiment was set up in 2010 and 2011 in Čepin (eastern Croatia in two treatments: control treatment and insecticide treatment. The trial involved two hybrids of FAO group 400: PR37N01 and PR37F73. Biology of pests was monitored in order to determine population size and larvae development stage as well as the optimal time of insecticide application. After determination of thresholds, maize was treated with chemical formulations of active substance dimethoate. Towards the end of vegetation, length of stem damage, number of larvae in maize stalk and ear as well as grain yield were recorded by dissection of maize stalks. Statistical analysis shows that year, hybrid and chemical treatment significantly influenced the incidence of this pest and justified the use of chemical preparations with mandatory monitoring biology of this pest.

  8. Sensitivity analysis for the energy performance assessment of hybrid compressed air energy storage systems

    International Nuclear Information System (INIS)

    Briola, Stefano; Di Marco, Paolo; Gabbrielli, Roberto; Riccardi, Juri

    2017-01-01

    Highlights: •A sensitivity analysis and DOE of the complete hybrid CAES are carried out. •The influence of the storage site volume on performance indicators is negligible. •The performances increase with the decrease of the compressor outlet pressure. •The performances are correlated for each temperature increase in combustion chamber. •Hybridization of Huntorf implies a significant increase of its first law efficiency. -- Abstract: A detailed mathematical model was developed for the complete Hybrid Compressed Air Energy Storage (H-CAES) configuration with underground storage site and liquid thermal energy storage, operating with a sequence of processes (charging, holding and discharging with respective duration) in arbitrary order. A sensitivity analysis was carried out in order to calculate several performance indicators of the complete H-CAES configuration, in relation to the simultaneous change of several process parameters. The methodology “Design of Experiments” was applied to the results of the sensitivity analysis in order to calculate the main effects of each process parameter on each performance indicator. The influence of the storage site volume on each performance indicator is negligible. The reduction of the compressor group outlet pressure and of the turbine group power allows a more effective thermodynamic utilization both of the energy stored by the compressors and of the overall energy supplied to the plant. Furthermore, the former utilization is more effective by an increase of the gas temperature in the combustion chambers, whereas the latter utilization is worsened. Moreover, as case study, the existing diabatic CAES plant of Huntorf was modified by introducing a diathermic oil thermal storage. This plant is suitable to operate according to a partial hybrid configuration by the deactivation of the heat exchanger located upstream of the low pressure turbine. The thermodynamic utilization of the overall energy supplied to the plant

  9. Implementing Molecular Dynamics for Hybrid High Performance Computers - 1. Short Range Forces

    International Nuclear Information System (INIS)

    Brown, W. Michael; Wang, Peng; Plimpton, Steven J.; Tharrington, Arnold N.

    2011-01-01

    The use of accelerators such as general-purpose graphics processing units (GPGPUs) have become popular in scientific computing applications due to their low cost, impressive floating-point capabilities, high memory bandwidth, and low electrical power requirements. Hybrid high performance computers, machines with more than one type of floating-point processor, are now becoming more prevalent due to these advantages. In this work, we discuss several important issues in porting a large molecular dynamics code for use on parallel hybrid machines - (1) choosing a hybrid parallel decomposition that works on central processing units (CPUs) with distributed memory and accelerator cores with shared memory, (2) minimizing the amount of code that must be ported for efficient acceleration, (3) utilizing the available processing power from both many-core CPUs and accelerators, and (4) choosing a programming model for acceleration. We present our solution to each of these issues for short-range force calculation in the molecular dynamics package LAMMPS. We describe algorithms for efficient short range force calculation on hybrid high performance machines. We describe a new approach for dynamic load balancing of work between CPU and accelerator cores. We describe the Geryon library that allows a single code to compile with both CUDA and OpenCL for use on a variety of accelerators. Finally, we present results on a parallel test cluster containing 32 Fermi GPGPUs and 180 CPU cores.

  10. Boosting the ambipolar performance of solution-processable polymer semiconductors via hybrid side-chain engineering.

    Science.gov (United States)

    Lee, Junghoon; Han, A-Reum; Yu, Hojeong; Shin, Tae Joo; Yang, Changduk; Oh, Joon Hak

    2013-06-26

    Ambipolar polymer semiconductors are highly suited for use in flexible, printable, and large-area electronics as they exhibit both n-type (electron-transporting) and p-type (hole-transporting) operations within a single layer. This allows for cost-effective fabrication of complementary circuits with high noise immunity and operational stability. Currently, the performance of ambipolar polymer semiconductors lags behind that of their unipolar counterparts. Here, we report on the side-chain engineering of conjugated, alternating electron donor-acceptor (D-A) polymers using diketopyrrolopyrrole-selenophene copolymers with hybrid siloxane-solubilizing groups (PTDPPSe-Si) to enhance ambipolar performance. The alkyl spacer length of the hybrid side chains was systematically tuned to boost ambipolar performance. The optimized three-dimensional (3-D) charge transport of PTDPPSe-Si with pentyl spacers yielded unprecedentedly high hole and electron mobilities of 8.84 and 4.34 cm(2) V(-1) s(-1), respectively. These results provide guidelines for the molecular design of semiconducting polymers with hybrid side chains.

  11. Quantitative Trait Loci Mapping of Western Corn Rootworm (Coleoptera: Chrysomelidae) Host Plant Resistance in Two Populations of Doubled Haploid Lines in Maize (Zea mays L.).

    Science.gov (United States)

    Bohn, Martin O; Marroquin, Juan J; Flint-Garcia, Sherry; Dashiell, Kenton; Willmot, David B; Hibbard, Bruce E

    2018-02-09

    Over the last 70 yr, more than 12,000 maize accessions have been screened for their level of resistance to western corn rootworm, Diabrotica virgifera virgifera (LeConte; Coleoptera: Chrysomelidae), larval feeding. Less than 1% of this germplasm was selected for initiating recurrent selection or other breeding programs. Selected genotypes were mostly characterized by large root systems and superior root regrowth after root damage caused by western corn rootworm larvae. However, no hybrids claiming native (i.e., host plant) resistance to western corn rootworm larval feeding are currently commercially available. We investigated the genetic basis of western corn rootworm resistance in maize materials with improved levels of resistance using linkage disequilibrium mapping approaches. Two populations of topcrossed doubled haploid maize lines (DHLs) derived from crosses between resistant and susceptible maize lines were evaluated for their level of resistance in three to four different environments. For each DHL topcross an average root damage score was estimated and used for quantitative trait loci (QTL) analysis. We found genomic regions contributing to western corn rootworm resistance on all maize chromosomes, except for chromosome 4. Models fitting all QTL simultaneously explained about 30 to 50% of the genotypic variance for root damage scores in both mapping populations. Our findings confirm the complex genetic structure of host plant resistance against western corn rootworm larval feeding in maize. Interestingly, three of these QTL regions also carry genes involved in ascorbate biosynthesis, a key compound we hypothesize is involved in the expression of western corn rootworm resistance. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  12. A Hybrid Neural Network-Genetic Algorithm Technique for Aircraft Engine Performance Diagnostics

    Science.gov (United States)

    Kobayashi, Takahisa; Simon, Donald L.

    2001-01-01

    In this paper, a model-based diagnostic method, which utilizes Neural Networks and Genetic Algorithms, is investigated. Neural networks are applied to estimate the engine internal health, and Genetic Algorithms are applied for sensor bias detection and estimation. This hybrid approach takes advantage of the nonlinear estimation capability provided by neural networks while improving the robustness to measurement uncertainty through the application of Genetic Algorithms. The hybrid diagnostic technique also has the ability to rank multiple potential solutions for a given set of anomalous sensor measurements in order to reduce false alarms and missed detections. The performance of the hybrid diagnostic technique is evaluated through some case studies derived from a turbofan engine simulation. The results show this approach is promising for reliable diagnostics of aircraft engines.

  13. Corn gluten meal as a biodegradable matrix material in wood fibre reinforced composites

    Energy Technology Data Exchange (ETDEWEB)

    Beg, M.D.H. [Department of Materials and Process Engineering, University of Waikato, Private Bag 3105, Hamilton (New Zealand); Pickering, K.L. [Department of Materials and Process Engineering, University of Waikato, Private Bag 3105, Hamilton (New Zealand)]. E-mail: klp@waikato.ac.nz; Weal, S.J. [Department of Materials and Process Engineering, University of Waikato, Private Bag 3105, Hamilton (New Zealand)

    2005-12-05

    This study was undertaken to investigate corn gluten meal (CGM) as a biodegradable matrix material for wood fibre reinforced composites. CGM was used alone, as well as hybridized with polypropylene, and reinforced with radiata pine (Pinus Radiata) fibre using a twin-screw extruder followed by injection moulding. Tensile testing, scanning electron microscopy and differential scanning calorimetry were carried out to assess the composites. For composites from CGM and wood fibres, extrusion was carried out with the aid of the following plasticizers: octanoic acid, glycerol, polyethylene glycol and water. Windows of processability for the different plasticizers were obtained for all plasticizers. These were found to lie between 20 and 50 wt.% of plasticizer with a maximum of approximately 20% wood fibre reinforcement. The best mechanical properties were obtained with a matrix containing 10 wt.% octanoic acid and 30 wt.% water, which gave a tensile strength and Young's modulus of 18.7 MPa and 4 GPa, respectively. Hybrid matrix composites were compounded with a maleated polypropylene coupling agent and benzoyl peroxide as a cross-linking agent. The highest tensile strength and Young's modulus obtained from hybrid matrix composites were 36.9 MPa and 5.8 GPa with 50 wt.% fibre.

  14. Comparative study on the growth performance of the hybrid catfish ...

    African Journals Online (AJOL)

    Growth performance of the hybrid catfish Heteroclarias reared in concrete and earthen pond systems were investigated in a 92-day experiment. Experiment was conducted using four rectangular ponds (2 concrete and 2 earthen) each measuring 14 × 6 × 1.5 metres in duplicates. The ponds were uniformly limed, fertilized ...

  15. quality of corn-field bean gluten-free pasta

    Directory of Open Access Journals (Sweden)

    Dib Ahlem

    2018-01-01

    Full Text Available Corn semolina supplemented by field bean semolina in ratio of 2/1 (w/w were used for obtaining protein and fiber enriched gluten-free pasta. The effect of hydrothermal treatment of corn flour on its applicability as gluten-free pasta improver was tested. A central composite design involving water hydration level and the amount of hydrothermal treated corn flour were used. Instrumental analyses of pasta (cooking loss, water absorption capacity, hydration and pasting properties, textural parameters and microstructure were carried out to assess the impact of experimental factors. Results showed that hydrothermal treatment of corn flour affected in different extent on pasta properties, improving cooking and textural characteristics of pasta. The optimum formulation of corn-field bean contained 7.41 g of treated corn flour and 77.26 mL of water was selected on the base of desirability function approach with value of 0.825 which showed the best pasta properties. Obtained results showed also that addition of treated flour induced significant differences (p < 0.05 in all parameters in comparison with control pasta.

  16. Performance evaluation and parametric optimum design of a molten carbonate fuel cell-thermophotovoltaic cell hybrid system

    International Nuclear Information System (INIS)

    Yang, Zhimin; Liao, Tianjun; Zhou, Yinghui; Lin, Guoxing; Chen, Jincan

    2016-01-01

    Highlights: • A molten carbonate fuel cell-thermophotovoltaic cell hybrid system is established. • The performance characteristics of the hybrid system are systematically evaluated. • The optimal regions of the power output density and efficiency are determined. • The values of key parameters at the maximum power output density are calculated. • The proposed system is proved to have advantages over other hybrid systems. - Abstract: A new model of the hybrid system composed of a molten carbonate fuel cell (MCFC) and a thermophotovoltaic cell (TPVC) is proposed to recovery the waste heat produced by the MCFC. Expressions for the power output and the efficiency of the hybrid system are analytically derived. The performance characteristics of the hybrid system are evaluated. It is found that when the current density of the MCFC, voltage output of the TPVC, electrode area ratio of the MCFC to the TPVC, and energy gap of the material in the photovoltaic cell are optimally chosen, the maximum power output density of the hybrid system is obviously larger than that of the single MCFC. Moreover, the improved percentages of the maximum power output density of the proposed model relative to that of the single MCFC are calculated for differently operating temperatures of the MCFC and are compared with those of some MCFC-based hybrid systems reported in the literature, and consequently, the advantages of the MCFC-TPVC hybrid system are revealed.

  17. Natural enemies of corn silk flies: Euxesta Stigmatias (Loew, Chaetopsis Massyla (Walker and Eumecosommyia Nubila (Wiedemann in Guasave Sinaloa, México

    Directory of Open Access Journals (Sweden)

    Jesús Ricardo Camacho Báez

    2012-09-01

    Full Text Available The flies species complex of corn, known as “stigma flies”, including the corn-silk fly, Euxesta stigmatias (Loew,Chaetopsis massyla (Walker and Eumecosommyia nubila (Wiedemann, they have became an important pest problem in the state of Sinaloa. The damage is associated with decaying symptoms has severely affected the quality and yield of the crop. The objectives of this research project are to report sampling results on the presence of natural sources of biological control agents (parasitoids, predators, and entomopathogenic nematodes with biological control potential capacity to manage the populations of this flies species complex. This research was conducted during the spring-summer growingseason of 2011. Samples where collected for eight continuous weeks during the corn cob development and maturation. The sampled corn variety was the hybrid Asgrow Garañon. We collected predominat two wasp species belonging to the order Hymenoptera, families Pteromalidae and Eurytomidae, which are parasites to the pupa stage of corn silk fly. In addition, a wasp from the genus Spalangia spp. The latter has shown a stronger natural parasitic effect of 47% on Euxesta stigmatias (Loew. We also observed a population of the pirate bug Orius insidiosus (Say during the months of March-July, attacking several developmental stages of the fly. Soil samples where also processed to isolate and to identify populations of possible entomopathogenic nematodes (EPN. Larvae of Galleria melonella L. where utilized as nematode traps. Populations of nematodes from three different sites where isolated from CIIDIR-IPN Unidad Sinaloa, Guasave and Maximiliano R. Lopez, all located in the Guasave. The isolated populations are included in the Rhabditidae family, genus and specie identification is still in progress. The natural enemies found have shown potential capacity to asseses them asbiological control agents on the corn flies complex.

  18. High Performance Hybrid Propulsion System for a Small Launch Vehicle, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. (PSI) proposes to design, develop and demonstrate an innovative high-performance, green, storable hybrid propellant system in a high mass...

  19. Spray particle drift mitigation using field corn (Zea mays L.) as a drift barrier.

    Science.gov (United States)

    Vieira, Bruno C; Butts, Thomas R; Rodrigues, Andre O; Golus, Jeffrey A; Schroeder, Kasey; Kruger, Greg R

    2018-04-24

    Herbicide particle drift reduces application efficacy and can cause severe impacts on nearby vegetation depending on the herbicide mode-of-action, exposure level, and tolerance to the herbicide. A particle drift mitigation effort placing windbreaks or barriers on the field boundaries to reduce off-target movement of spray particles has been utilized in the past. The objective of this research was to evaluate the effectiveness of field corn (Zea mays L.) at different heights as a particle drift barrier. Applications with a non-air inclusion flat fan nozzle (ER11004) resulted in greater particle drift when compared to an air inclusion nozzle (TTI11004). Eight rows of corn were used as barriers (0.91, 1.22, and 1.98 m height) which reduced the particle drift for both nozzles, especially at shorter downwind distances. Applications with the ER11004 nozzle without corn barriers had 1% of the applied rate (D 99 ) predicted to deposit at 14.8 m downwind, whereas this distance was reduced (up to 7-fold) when applications were performed with corn barriers. The combination of corn drift barriers and nozzle selection (TTI11004) provided satisfactory particle drift reduction when the D 99 estimates were compared to applications with the ER11004 nozzle without corn barriers (up to 10-fold difference). The corn drift barriers were effective in reducing particle drift from applications with the ER11004 and the TTI11004 nozzles (Fine and Ultra Coarse spray classifications, respectively). The corn drift barrier had appropriate porosity and width as the airborne spray was captured within its canopy instead of deflecting up and over it. This article is protected by copyright. All rights reserved.

  20. An Evaluation of Molecular Dynamics Performance on the Hybrid Cray XK6 Supercomputer

    International Nuclear Information System (INIS)

    Brown, W. Michael; Nguyen, Trung D.; Fuentes-Cabrera, Miguel A.; Fowlkes, Jason Davidson; Rack, Philip D.; Berger, Mark

    2012-01-01

    For many years, the drive towards computational physics studies that match the size and time-scales of experiment has been fueled by increases in processor and interconnect performance that could be exploited with relatively little modification to existing codes. Engineering and electrical power constraints have disrupted this trend, requiring more drastic changes to both hardware and software solutions. Here, we present details of the Cray XK6 architecture that achieves increased performance with the use of GPU accelerators. We review software development efforts in the LAMMPS molecular dynamics package that have been implemented in order to utilize hybrid high performance computers. We present benchmark results for solid-state, biological, and mesoscopic systems and discuss some challenges for utilizing hybrid systems. We present some early work in improving application performance on the XK6 and performance results for the simulation of liquid copper nanostructures with the embedded atom method.

  1. Assessment of soil attributes and crop productivity after diversification of the ubiquitous corn-soybean rotation in the northwestern U.S. Corn Belt

    Science.gov (United States)

    Highly specialized cash-grain production systems based upon corn-soybean rotations under tilled soil management are common in the northwestern U.S. Corn Belt. This study, initiated in 1997, was conducted to determine if diversification of this ubiquitous corn-soybean rotation would affect soil char...

  2. CORN (Zea mays L. ADAPTATION STUDIES UNDER IRRIGATED CONDITIONS OF SOUTHEASTERN ANATOLIA REGION OF TURKEY

    Directory of Open Access Journals (Sweden)

    A. Öktem

    2000-12-01

    Full Text Available Southeastern Anatolia region of Turkey has a great agricultural potential. When the Southeastern Anatolia Project (GAP is complete, 1.7 million hectare area will be irrigated. Corn has a great importance due to have high-yield and being a secondary crop at GAP region which has suitable soil and climate conditions for corn production. The main goal of this study was to determine the suitable corn varieties for GAP region. This research was conducted with 14 hybrid dent corn varieties at Agriculture Faculty in Şanlıurfa province during the growth season of 1997-1998. At this study grain yield, tassel flowering date, plant height, ear length, kernel number of ear, grain weight of ear, 1000 seeds weight and grain moisture at harvest were investigated. Variance analysis results showed that there were significant differences (P<0.01 in grain yield and yield characteristics among tested varieties. According to the average of two years, grain yield varied between 8.83 (Alimax and 13.92 (Rx.770 t /ha and grain moisture at harvest varied from 15.81% (Antbey to 25.92% (P.3394. Antbey had the highest tassel flowering date value (62.3 day and the lowest value was obtained from C.6127 (55.5 day genotype. Plant height varied between 190.5 cm (C.6127 and 243.4 cm (Antbey. Ear length ranged from 18.9 cm (Alimax to 21.8 cm (Tambre. Kernel number of ear varied from 439.0 number/ear (Antbey to 670.9 number/ear (P.3279. The highest grain weight of ear value was obtained from Rx.770 genotype (239.5 g and also the lowest value was 162.1 g (Antbey. 1000 seed weight ranged from 328.9 g (P.3279 to 383.0 g (Tambre. All tested varieties gave over 10 t /ha yield except Alimax, Sele and Antbey varieties.

  3. Nanocellulose Derivative/Silica Hybrid Core-Shell Chiral Stationary Phase: Preparation and Enantioseparation Performance

    Directory of Open Access Journals (Sweden)

    Xiaoli Zhang

    2016-05-01

    Full Text Available Core-shell silica microspheres with a nanocellulose derivative in the hybrid shell were successfully prepared as a chiral stationary phase by a layer-by-layer self-assembly method. The hybrid shell assembled on the silica core was formed using a surfactant as template by the copolymerization reaction of tetraethyl orthosilicate and the nanocellulose derivative bearing triethoxysilyl and 3,5-dimethylphenyl groups. The resulting nanocellulose hybrid core-shell chiral packing materials (CPMs were characterized and packed into columns, and their enantioseparation performance was evaluated by high performance liquid chromatography. The results showed that CPMs exhibited uniform surface morphology and core-shell structures. Various types of chiral compounds were efficiently separated under normal and reversed phase mode. Moreover, chloroform and tetrahydrofuran as mobile phase additives could obviously improve the resolution during the chiral separation processes. CPMs still have good chiral separation property when eluted with solvent systems with a high content of tetrahydrofuran and chloroform, which proved the high solvent resistance of this new material.

  4. Performance of STICS model to predict rainfed corn evapotranspiration and biomass evaluated for 6 years between 1995 and 2006 using daily aggregated eddy covariance fluxes and ancillary measurements.

    Science.gov (United States)

    Pattey, Elizabeth; Jégo, Guillaume; Bourgeois, Gaétan

    2010-05-01

    Verifying the performance of process-based crop growth models to predict evapotranspiration and crop biomass is a key component of the adaptation of agricultural crop production to climate variations. STICS, developed by INRA, was part of the models selected by Agriculture and Agri-Food Canada to be implemented for environmental assessment studies on climate variations, because of its built-in ability to assimilate biophysical descriptors such as LAI derived from satellite imagery and its open architecture. The model prediction of shoot biomass was calibrated using destructive biomass measurements over one season, by adjusting six cultivar parameters and three generic plant parameters to define two grain corn cultivars adapted to the 1000-km long Mixedwood Plains ecozone. Its performance was then evaluated using a database of 40 years-sites of corn destructive biomass and yield. In this study we evaluate the temporal response of STICS evapotranspiration and biomass accumulation predictions against estimates using daily aggregated eddy covariance fluxes. The flux tower was located in an experimental farm south of Ottawa and measurements carried out over corn fields in 1995, 1996, 1998, 2000, 2002 and 2006. Daytime and nighttime fluxes were QC/QA and gap-filled separately. Soil respiration was partitioned to calculate the corn net daily CO2 uptake, which was converted into dry biomass. Out of the six growing seasons, three (1995, 1998, 2002) had water stress periods during corn grain filling. Year 2000 was cool and wet, while 1996 had heat and rainfall distributed evenly over the season and 2006 had a wet spring. STICS can predict evapotranspiration using either crop coefficients, when wind speed and air moisture are not available, or resistance. The first approach provided higher prediction for all the years than the resistance approach and the flux measurements. The dynamic of evapotranspiration prediction of STICS was very good for the growing seasons without

  5. Field weakening performance of flux-switching machines for hybrid/electric vehicles

    NARCIS (Netherlands)

    Tang, Y.; Paulides, J.J.H.; Lomonova, E.A.

    2015-01-01

    Flux-switching machines (FSMs) are a viable candidate for electric propulsion of hybrid/electric vehicles. This paper investigates the field weakening performance of FSMs. The investigation starts with general torque and voltage expressions, which reveal the relationships between certain parameters

  6. Performance analysis of a novel coaxial power-split hybrid powertrain using a CNG engine and supercapacitors

    International Nuclear Information System (INIS)

    Ouyang, Minggao; Zhang, Weilin; Wang, Enhua; Yang, Fuyuan; Li, Jianqiu; Li, Zhongyan; Yu, Ping; Ye, Xiao

    2015-01-01

    Highlights: • Four different types of hybrid powertrain for heavy-duty vehicles are reviewed. • A novel coaxial power-split hybrid powertrain is proposed and models are developed. • Performance characteristics are analyzed and compared to a conventional powertrain. • Fuel saving potential is evaluated and explained using energy efficiency method. - Abstract: Energy conservation is a very important task for the automotive industry. The use of hybrid electric vehicles can improve energy efficiency, thus reducing fuel consumption and carbon emissions. In this research, the performance characteristics of a novel coaxial power-split hybrid powertrain for a transit bus are presented. The power sources are a combination of a compressed natural gas (CNG) engine and supercapacitors. A mathematical model for the coaxial power-split hybrid powertrain is established. Subsequently, an analysis program is developed based on Matlab and Advisor. The parameters are specified using experimental data. Afterwards, a rule-based control strategy is designed and optimized from the viewpoint of energy efficiency. Later, the system performance is evaluated using the Chinese Transit Bus City Driving Cycle and compared to a conventional powertrain. The results indicate that the proposed coaxial power-split hybrid powertrain can fulfill the requirements of the transit bus and enhance the energy efficiency dramatically. Moreover, the average energy efficiency of the supercapacitors was found to be above 97% over the entire driving cycle. Using supercapacitors as energy storage devices for the coaxial power-split hybrid powertrain can effectively recover the kinetic energy during regenerative braking and is a good solution for transit buses that require frequent acceleration and deceleration.

  7. THE INFLUENCE OF ABIOTIC FACTORS ON THE PRESENCE OF EUROPEAN CORN BORER (Ostrinia nubilalis Hubner

    Directory of Open Access Journals (Sweden)

    Ankica Sarajlić

    2015-12-01

    Full Text Available Field experiments with natural population of European corn borer (ECB were conducted in three vegetation seasons (2012-2014 at Agricultural Institute in Osijek. The experiment was set up in a randomized block design as split-split plot method, with three repetitions. This plot has been constantly maize - soybean rotation for already 15 years. It was a 3x3x4 factorial experiment with three irrigation levels (A1- non-irrigated (only natural precipitation, A2-from 60% to 80% field water capacity - FWC and A3-from 80% to100% FWC, three nitrogen fertilizer levels (B1-0, B2-100 and B3-200 kg N/ha and four different genotypes (C1-0SSK 596; C2-0SSK 617; C3-0SSK 602 and C4-0SSK 552.The aim of this study was to determine the effect of different levels of irrigation, nitrogen fertilization and genotypes on occurrence and damage of maize plants by the European corn borer larvae and relation between leaf feeding larvae with nitrogen and silicon concentration as well as C/N ratio. At the end of each growing season, ten maize plants from each variant were cut. Ear weight for each specific plant (g, tunnel length (cm, number of larvae in stalk, number of larvae in the ear shank, ear shank damage (cm and total number of larvae in maize plantwere determined. In silking stage (middle of July ten leaves (below the ear, from 10 maize plants were sampled on each variant. Nitrogen, carbon and silicon concentrations were determined in maize leaf (% and C/N ratio calculated. In 2014, a significantly lower ECB attack was determined taking into account lower temperatures and higher amount of precipitate compared to the previous years. Dominance of Z-type European corn borer on pheromone traps in the area of eastern Slavonia was confirmed. Increasing the level of soil water content, damage from larvae was reduced and increasing the level of nitrogen fertilization feeding activity was increased. We have confirmed different hybrid resistance in regards to damage from larvae

  8. Change of digestive physiology in sea cucumber Apostichopus japonicus (Selenka) induced by corn kernels meal and soybean meal in diets

    Science.gov (United States)

    Yu, Haibo; Gao, Qinfeng; Dong, Shuanglin; Hou, Yiran; Wen, Bin

    2016-08-01

    The present study was conducted to determine the change of digestive physiology in sea cucumber Apostichopus japonicus (Selenka) induced by corn kernels meal and soybean meal in diets. Four experimental diets were tested, in which Sargassum thunbergii was proportionally replaced by the mixture of corn kernels meal and soybean meal. The growth performance, body composition and intestinal digestive enzyme activities in A. japonicus fed these 4 diets were examined. Results showed that the sea cucumber exhibited the maximum growth rate when 20% of S. thunbergii in the diet was replaced by corn kernels meal and soybean meal, while 40% of S. thunbergii in the diet can be replaced by the mixture of corn kernels meal and soybean meal without adversely affecting growth performance of A. japonicus. The activities of intestinal trypsin and amylase in A. japonicus can be significantly altered by corn kernels meal and soybean meal in diets. Trypsin activity in the intestine of A. japonicus significantly increased in the treatment groups compared to the control, suggesting that the supplement of corn kernels meal and soybean meal in the diets might increase the intestinal trypsin activity of A. japonicus. However, amylase activity in the intestine of A. japonicus remarkably decreased with the increasing replacement level of S. thunbergii by the mixture of corn kernels meal and soybean meal, suggesting that supplement of corn kernels meal and soybean meal in the diets might decrease the intestinal amylase activity of A. japonicus.

  9. Influence of continuous cropping on corn and soybean pathogens

    OpenAIRE

    Ranzi, Camila; Camera, Juliane Nicolodi; Deuner, Carolina Cardoso

    2017-01-01

    ABSTRACT The objective of this study was to evaluate the influence of two tillage programs (conventional and no-tillage) and different rotations with soybeans and corn on the occurrence of Fusarium species. The work was conducted in the experimental field and Seed Laboratory at Iowa State University. The treatments were: tillage (no-tillage and conventional tillage), crop (corn and soybeans) and three different cropping sequences for corn and soybeans, respectively. Treatment with corn: (1) t...

  10. Effects of different irrigation methods and plant densities on silage quality parameters of PR 31Y43 hybrid corn cultivar (Zea mays L. var. indentata [Sturtev.] L.H. Bailey

    Directory of Open Access Journals (Sweden)

    Muhammet Karasahin

    2014-03-01

    Full Text Available The yield and quality of corn silage is related to genotype as well as factors such as climate, soil conditions, altitude, planting time, plant density, irrigation, and harvesting time. This study was conducted to determine the effects of different irrigation methods (drip, subsoil drip, and subsoil capillary and different plant densities (102 040, 119 040, and 142 850 plant ha-1 on silage quality parameters of PR 31Y43 hybrid corn (Zea mays L. var. indentata [Sturtev.] L.H. Bailey in 2011 and 2012 under ecological conditions in Eskipazar-Karabuk, Turkey. Plant densities were significantly different on fresh ear ratio and plant crude protein (CP yield in both years under study. The highest fresh ear ratio values were obtained with 102 040 and 119 040 plant ha-1 densities and the highest plant CP yield with 142 850 plant ha-1. While the irrigation method x plant density interactions were significant for silage CP ratio in the first year, they were significant on fresh ear ratio in the second year. The highest fresh ear ratio values were obtained from subsoil capillary x 119 040 plant ha-1 and drip x 119 040 plant ha-1 interactions; the highest plant and silage CP ratio values were obtained from subsoil capillary x 142 850 plant ha-1 and subsoil drip x 102 040 plant ha-1 interactions. As a result of the research, high Flieg scores were obtained from each irrigation method and plant density. When plant CP yield is taken into consideration, the 142 850 plant ha-1 density is more important.

  11. Land usage attributed to corn ethanol production in the United States: sensitivity to technological advances in corn grain yield, ethanol conversion, and co-product utilization.

    Science.gov (United States)

    Mumm, Rita H; Goldsmith, Peter D; Rausch, Kent D; Stein, Hans H

    2014-01-01

    Although the system for producing yellow corn grain is well established in the US, its role among other biofeedstock alternatives to petroleum-based energy sources has to be balanced with its predominant purpose for food and feed as well as economics, land use, and environmental stewardship. We model land usage attributed to corn ethanol production in the US to evaluate the effects of anticipated technological change in corn grain production, ethanol processing, and livestock feeding through a multi-disciplinary approach. Seven scenarios are evaluated: four considering the impact of technological advances on corn grain production, two focused on improved efficiencies in ethanol processing, and one reflecting greater use of ethanol co-products (that is, distillers dried grains with solubles) in diets for dairy cattle, pigs, and poultry. For each scenario, land area attributed to corn ethanol production is estimated for three time horizons: 2011 (current), the time period at which the 15 billion gallon cap for corn ethanol as per the Renewable Fuel Standard is achieved, and 2026 (15 years out). Although 40.5% of corn grain was channeled to ethanol processing in 2011, only 25% of US corn acreage was attributable to ethanol when accounting for feed co-product utilization. By 2026, land area attributed to corn ethanol production is reduced to 11% to 19% depending on the corn grain yield level associated with the four corn production scenarios, considering oil replacement associated with the soybean meal substituted in livestock diets with distillers dried grains with solubles. Efficiencies in ethanol processing, although producing more ethanol per bushel of processed corn, result in less co-products and therefore less offset of corn acreage. Shifting the use of distillers dried grains with solubles in feed to dairy cattle, pigs, and poultry substantially reduces land area attributed to corn ethanol production. However, because distillers dried grains with solubles

  12. Low-frequency ESR studies on permeable and impermeable deuterated nitroxyl radicals in corn oil solution.

    Science.gov (United States)

    David Jebaraj, D; Utsumi, Hideo; Milton Franklin Benial, A

    2018-04-01

    Low-frequency electron spin resonance studies were performed for 2 mM concentration of deuterated permeable and impermeable nitroxyl spin probes, 3-methoxycarbonyl-2,2,5,5-tetramethyl-pyrrolidine-1-oxyl and 3-carboxy-2,2,5,5,-tetramethyl-1-pyrrolidinyloxy in pure water and various concentrations of corn oil solution. The electron spin resonance parameters such as the line width, hyperfine coupling constant, g factor, rotational correlation time, permeability, and partition parameter were estimated. The broadening of line width was observed for nitroxyl radicals in corn oil mixture. The rotational correlation time increases with increasing concentration of corn oil, which indicates the less mobile nature of spin probe in corn oil mixture. The membrane permeability and partition parameter values were estimated as a function of corn oil concentration, which reveals that the nitroxyl radicals permeate equally into the aqueous phase and oil phase at the corn oil concentration of 50%. The electron spin resonance spectra demonstrate the permeable and impermeable nature of nitroxyl spin probes. From these results, the corn oil concentration was optimized as 50% for phantom studies. In this work, the corn oil and pure water mixture phantom models with various viscosities correspond to plasma membrane, and whole blood membrane with different hematocrit levels was studied for monitoring the biological characteristics and their interactions with permeable nitroxyl spin probe. These results will be useful for the development of electron spin resonance and Overhauser-enhanced magnetic resonance imaging modalities in biomedical applications. Copyright © 2017 John Wiley & Sons, Ltd.

  13. Water Table Management Reduces Tile Nitrate Loss in Continuous Corn and in a Soybean-Corn Rotation

    Directory of Open Access Journals (Sweden)

    Craig F. Drury

    2001-01-01

    Full Text Available Water table management systems can be designed to alleviate soil water excesses and deficits, as well as reduce nitrate leaching losses in tile discharge. With this in mind, a standard tile drainage (DR system was compared over 8 years (1991 to 1999 to a controlled tile drainage/subirrigation (CDS system on a low-slope (0.05 to 0.1% Brookston clay loam soil (Typic Argiaquoll in southwestern Ontario, Canada. In the CDS system, tile discharge was controlled to prevent excessive drainage, and water was pumped back up the tile lines (subirrigation to replenish the crop root zone during water deficit periods. In the first phase of the study (1991 to 1994, continuous corn (Zea mays, L. was grown with annual nitrogen (N fertilizer inputs as per local soil test recommendations. In the second phase (1995 to 1999, a soybean (Glycine max L., Merr.-corn rotation was used with N fertilizer added only during the two corn years. In Phase 1 when continuous corn was grown, CDS reduced total tile discharge by 26% and total nitrate loss in tile discharge by 55%, compared to DR. In addition, the 4-year flow weighted mean (FWM nitrate concentration in tile discharge exceeded the Canadian drinking water guideline (10 mg N l–1 under DR (11.4 mg N l–1, but not under CDS (7.0 mg N l–1. In Phase 2 during the soybean-corn rotation, CDS reduced total tile discharge by 38% and total nitrate loss in tile discharge by 66%, relative to DR. The 4-year FWM nitrate concentration during Phase 2 in tile discharge was below the drinking water guideline for both DR (7.3 mg N l–1 and CDS (4.0 mg N l–1. During both phases of the experiment, the CDS treatment caused only minor increases in nitrate loss in surface runoff relative to DR. Hence CDS decreased FWM nitrate concentrations, total drainage water loss, and total nitrate loss in tile discharge relative to DR. In addition, soybean-corn rotation reduced FWM nitrate concentrations and total nitrate loss in tile discharge

  14. Non-aqueous hybrid supercapacitors fabricated with mesoporous TiO2 microspheres and activated carbon electrodes with superior performance

    Science.gov (United States)

    Cai, Yong; Zhao, Bote; Wang, Jie; Shao, Zongping

    2014-05-01

    Mesoporous TiO2 microspheres, synthesized by a facile template-free solvothermal method and subsequent heat treatment, are exploited as the electrode for hybrid supercapacitors. The effects of the calcination temperature on the phase composition, particulate microstructure and morphology are characterized by XRD, Raman, FE-SEM and N2 adsorption/desorption measurements. Hybrid supercapacitors utilizing the as-prepared TiO2 mesoporous microspheres as the negative electrode and activated carbon (AC) as the positive electrode in a non-aqueous electrolyte are fabricated. The electrochemical performance of these hybrid supercapacitors is studied by galvanostatic charge-discharge and cyclic voltammetry (CV). The hybrid supercapacitor built from TiO2 microspheres calcined at 400 °C shows the best performance, delivering an energy density of 79.3 Wh kg-1 at a power density of 178.1 W kg-1. Even at a power density of 9.45 kW kg-1, an energy density of 31.5 Wh kg-1 is reached. These values are much higher than the AC-AC symmetric supercapacitor. In addition, the hybrid supercapacitor exhibits excellent cycling performance, retaining 98% of the initial energy density after 1000 cycles. Such outstanding electrochemical performance of the hybrid supercapacitor is attributed to the matched reaction kinetics between the two electrodes with different energy storage mechanisms.

  15. Metabolizable energy of corn hybrids for broiler chickens at different ages Energia metabolizável de milhos híbridos para frangos de corte em diferentes idades

    Directory of Open Access Journals (Sweden)

    Reinaldo Kanji Kato

    2011-12-01

    Full Text Available We determined the values of apparent metabolizable (AME, apparent corrected (AMEn, true (TME and true corrected (TMEn energy of six corn hybrids for broiler chickens in phases 1-7, 8-14, 15-21, 22-28, 29-35 and 36-42 day-old birds, using the substitution method (40% of reference diet with the test ingredient. Ross-308 male chicks (1,134 were allotted to metabolism cages and the number of birds per experimental unit was adjusted to suit each bird's density stage in the cage, using six replicates. Simultaneously, birds continue to fast for the determination of metabolic and endogenous losses for each study phase. The birds received water and food ad libitum during the experimental period. The birds were maintained in metabolism cages for seven days, four days for adaptation to the cage and food, and three days for excreta collection. The corn energy values were significantly lower only in the pre-initial phase (1-7 days. Thus, broiler feed formulations of AMEn values for corn of 3563 kcal/kg DM for 1 to 7 days and 3778 kcal/kg DM from 7-day-old birds are recommended.The agronomic characteristics of the corn had no influence on the birds energy levels.Foram determinados os valores de energia metabolizável aparente (EMA, aparente corrigida (EMAn, verdadeira (EMV e verdadeira corrigida (EMVn de seis milhos híbridos para frangos de corte nas fases de 1 a 7, 8 a 14, 15 a 21, 22 a 28, 29 a 35 e 36 a 42 dias de idade das aves, usando o método de substituição (40% da ração referência pelo ingrediente em teste. Pintos machos Ross-308 (1.134 foram distribuídos em gaiolas de metabolismo, sendo o número de aves por parcela, ajustado em cada fase para adequação da densidade de aves na gaiola, sendo utilizadas 6 repetições por tratamento. Simultaneamente, foram mantidas aves em jejum para a determinação das perdas endógenas e metabólicas para cada fase do estudo. As aves receberam água e ração à vontade durante todo período experimental

  16. Apparent digestibility coefficients and consumption of corn silage with and without Bt gene in sheep

    Directory of Open Access Journals (Sweden)

    Camila Memari Trava

    2012-12-01

    Full Text Available Corn silage is the most important preserved food for ruminants. The transgenic corn was inserted into the genetic code Bt gene (Bacillus thuringiensis that expresses a toxic protein to caterpillars pests of maize, reducing production costs. To evaluate the varieties of plant corn silage DKB and AG with or without the Bt gene on the voluntary intake of DM (g/day and apparent digestibility coefficients (CDA of nutrients in sheep, the experiment was conducted at the Institute of Animal Science Nova Odessa-SP. Were used 20 sheep and the experimental design was randomized blocks in scheme factorial type 2x2 (two varieties of plant corn to silage, with the presence or absence of Bt gene, with five animals per treatment. These animals were housed in metabolism cages, with collector and separator feces and urine for 21 days, comprising 8 days for diet adaptation and 7 days for determination of intake, followed by 6 days of collection of feces, to measure DMI (g/day, CDA DM, CP and NDF. Samples of feed offered, leftovers and feces were identified and placed in a circulating air oven maintained at 55°C to constant weight. The analyses were performed in Bromatological Analysis Laboratory of the Institute of Animal Science. To CTMS (g/day was interaction effect (p<0.05 than in the variety AG (779.36 was greater than DKB (637.52, because the DM content of the sheet AG (31.09 was superior to DKB (29.17. The AG (779.36 was higher than your counterpart isogenic without the gene (575.15 p<0.05. The DKB without the gene (637.52 did not differ (p>0.05 from your counterpart DKBBt with the gene (590.78. The lowest total DM intake in g/day was observed for varieties with Bt gene insertion (genetically modified organism - GMO and a possible explanation is the higher value of NDF in the silages of variety with the Bt gene in relation to their isogenic counterparts without the gene. The CDA, DM and NDF no had interaction effect between varieties factors and GMO (p>0

  17. PERFORMANCE OF PROMISING HYBRID RICE IN TWO DIFFERENT ELEVATIONS OF IRRIGATED LOWLAND IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Yuni Widyastuti

    2015-06-01

    Full Text Available The hybrid rice program has been established since early 1990’s at the Indonesia Center for Rice Research (ICRR. Twenty-four experimental hybrid rice varieties which have been developed were tested in lowland rice fields in Sukamandi (West Java and Batang (Central Java during the dry season and the rainy season of 2012. Randomized complete block design (RCBD with three replications was used in each location. The results showed that grains yields were affected by locations, seasons, and genotypes. The genotypes x locations x seasons interaction effect was significant; therefore, the best hybrid was different for each location and season. A7/PK36 hybrid has the best performance in Batang during the dry season, while A7/PK40 and A7/PK32 are the best hybrids in the rainy season. In Sukamandi, nine hybrids were identified as better yielder than that of the check cultivar in the dry season, but not so in the rainy season. Using the correlation and path analysis, we found that the number of panicles per hill and the number of filled grains per panicle could be used as selection criteria for yield in hybrid rice.

  18. SILAGE QUALITY OF CORN AND SORGHUM ADDED WITH FORAGE PEANUTS

    Directory of Open Access Journals (Sweden)

    WALKÍRIA GUIMARÃES CARVALHO

    2016-01-01

    Full Text Available Corn and sorghum are standard silage crops because of their fermentative characteristics. While corn and sorghum silages have lower crude protein (CP contents than other crops, intercropping with legumes can increase CP content. Furthermore, one way to increase CP content is the addition of legumes to silage. Consequently, the research objective was to evaluate the fermentative and bromatological characteristics of corn (Zea mays and sorghum (Sorghum bicolor silages added with forage peanuts (Arachis pintoi. The experimental design was completely randomized with four replicates. The treatments consisted of corn silage, sorghum silage, forage peanut silage, corn silage with 30% forage peanut, and sorghum silage with 30% forage peanut. The results showed that the corn and sorghum added with peanut helped to improve the silage fermentative and bromatological characteristics, proving to be an efficient technique for silage quality. The forage peanut silage had lower fermentative characteristics than the corn and sorghum silages. However, the forage peanut silage had a greater CP content, which increased the protein contents of the corn and sorghum silages when intercropped with forage peanuts.

  19. Fumonisins in corn (Zea mays L.) from Southern Brazil.

    Science.gov (United States)

    Scussel, Vildes M; Savi, Geovana D; Costas, Lea Luzia Freitas; Xavier, José Junior Mendonça; Manfio, Daniel; Bittencourt, Karoline O; Aguiar, Kin; Stein, Stephanie M

    2014-01-01

    A total of 232 samples of corn commercialised in Santa Catarina state, Southern Brazil (temperate zone climate), were evaluated from 2007 to 2012 for fumonisins (FBs: FB1 and FB2). Before performing this study, a FBs method with liquid chromatography and fluorescence detection (ex. 335; em. 440 nm) was validated first. FBs were detected in 46.6% (108 samples), with values ranging from 66 to 7832 µg kg(-1) for FB1 and 110 to 1201 µg kg(-1) for FB2. The number of contaminated corn samples for FB1 and FB2 varied and often presented contamination of FB1 only. Per year of analysis, the numbers were: n = 22/8(FB1/FB2), 44/5(FB1/FB2), 25/12(FB1/FB2), 4(FB1), 6(FB1) and 7(FB1) in 2007, 2008, 2009, 2010, 2011 and 2012, respectively. The contamination percentage was 42.3/15.4, 59.5/6.8, 43.8/21.1, 36.4, 35.3 and 33.3%, respectively, during these years. Consumers can be exposed to these mycotoxins and their health can be at risk through the consumption of contaminated corn.

  20. Hybrid ANN–PLS approach to scroll compressor thermodynamic performance prediction

    International Nuclear Information System (INIS)

    Tian, Z.; Gu, B.; Yang, L.; Lu, Y.

    2015-01-01

    In this paper, a scroll compressor thermodynamic performance prediction was carried out by applying a hybrid ANN–PLS model. Firstly, an experimental platform with second-refrigeration calorimeter was set up and steady-state scroll compressor data sets were collected from experiments. Then totally 148 data sets were introduced to train and verify the validity of the ANN–PLS model for predicting the scroll compressor parameters such as volumetric efficiency, refrigerant mass flow rate, discharge temperature and power consumption. The ANN–PLS model was determined with 5 hidden neurons and 7 latent variables through the training process. Ultimately, the ANN–PLS model showed better performance than the ANN model and the PLS model working separately. ANN–PLS predictions agree well with the experimental values with mean relative errors (MREs) in the range of 0.34–1.96%, correlation coefficients (R 2 ) in the range of 0.9703–0.9999 and very low root mean square errors (RMSEs). - Highlights: • Hybrid ANN–PLS is utilized to predict the thermodynamic performance of scroll compressor. • ANN–PLS model is determined with 5 hidden neurons and 7 latent variables. • ANN–PLS model demonstrates better performance than ANN and PLS working separately. • The values of MRE and RMSE are in the range of 0.34–1.96% and 0.9703–0.9999, respectively

  1. Field evidence for the exposure of ground beetles to Cry1Ab from transgenic corn.

    Science.gov (United States)

    Zwahlen, Claudia; Andow, David A

    2005-01-01

    Non-target organisms associated with the soil might be adversely affected by exposure to the CrylAb protein from Bacillus thuringiensis (Bt) in transgenic corn (Zea mays L.). To check for such exposure, we used ELISA to test for Cry1Ab in ground beetles collected live from fields with Bt corn residues and Bt corn (Bt/Bt), Bt corn residues and non-Bt crops (Bt/non-Bt), or non-Bt corn residues and non-Bt crops (non-Bt/non-Bt). In fields with Bt corn residues (Bt/Bt and Bt/non-Bt), Cry1Ab was present in all seven species of ground beetles examined (Agonum placidum, Bembidion rupicola, Clivina impressefrons, Cyclotrachelus iowensis, Harpalus pensylvanicus, Poecilus chalcites, and Poecilus lucublandus). For the two most abundant species, P. chalcites and P. lucublandus, the proportion of beetles with Cry1Ab was significantly higher in Bt/Bt fields (0.50-1.0) and Bt/non-Bt fields (0.41-0.50) than in non-Bt/non-Bt fields (0.0). This is the first field evidence that some ground beetle species are exposed to Cry1Ab. The implications of exposure on the performance of these non-target organisms are unclear.

  2. Hybrid FRP-concrete bridge deck system final report II : long term performance of hybrid FRP-concrete bridge deck system.

    Science.gov (United States)

    2009-06-01

    This report describes the investigation of the long term structural performance of a : hybrid FRP-concrete (HFRPC) bridge deck on steel girders. The study aimed at : assessing three long term aspects pertaining to the HFRPC bridge deck: (1) creep : c...

  3. Cassava dreg as replacement of corn in goat kid diets.

    Science.gov (United States)

    Ferraz, Lucíola Vilarim; Guim, Adriana; Véras, Robson Magno Liberal; de Carvalho, Francisco Fernando Ramos; de Freitas, Marciela Thais Dino

    2018-02-01

    The effects of corn replacement by cassava dreg in diets of crossbred goat kids were evaluated. We tested the impacts of 0, 33, 66 and 100% replacement on intake, digestibility, feeding behaviour, performance and carcass characteristics. Thirty-six goat kids, aged between 4 and 5 months and with initial body weights of 17.61 ± 1.98 kg, were used in a completely randomised design. Analysis of regression revealed a negative linear effect on neutral detergent fibre (NDF) intake and a positive linear effect on non-fibrous carbohydrates (NFC) and hydrocyanic acids (HCN) intake. Cassava dreg use had a positive linear effect on organic matter digestibility and non-fibrous carbohydrates. Based on our results, cassava dreg use did not negatively impact animal performance, feeding behaviour and carcass characteristics, suggesting that it may replace corn up to 100% in the diets of confined goat kids.

  4. Process intensification effect of ball milling on the hydrothermal pretreatment for corn straw enzymolysis

    International Nuclear Information System (INIS)

    Yuan, Zhengqiu; Long, Jinxing; Wang, Tiejun; Shu, Riyang; Zhang, Qi; Ma, Longlong

    2015-01-01

    Highlights: • Novel pretreatment of ball milling combined with hydrothermal method was presented. • Intensification effect of ball milling was significant for corn straw enzymolysis. • Ball milling destroyed the physical structure of corn straw. • Chemical (liquid mixture) method removed lignin and hemicellulose. • Glucose yield increased from 0.41 to 13.86 mg mL −1 under the optimized condition. - Abstract: Enhancement of the cellulose accessibility is significant for biomass enzymatic hydrolysis. Here, we reported an efficient combined pretreatment for corn straw enzymolysis using ball milling and dilute acid hydrothermal method (a mixture solvent of H 2 O/ethanol/sulfuric acid/hydrogen peroxide liquid). The process intensification effect of ball milling on the pretreatment of the corn straw was studied through the comparative characterization of the physical–chemical properties of the raw and pretreated corn straw using FT-IR, BET, XRD, SEM, and HPLC analysis. The effect of the pretreatment temperature was also investigated. Furthermore, various pretreatment methods were compared as well. Moreover, the pretreatment performance was measured by enzymolysis. The results showed that ball milling had a significant process intensification effect on the corn straw enzymolysis. The glucose concentration was dramatically increased from 0.41 to 13.86 mg mL −1 after the combined treatment of ball milling and hydrothermal. The efficient removal of lignin and hemicellulose and the enlargement of the surface area were considered to be responsible for this significant increase based on the intensive analysis on the main components and the physical–chemical properties of the raw and pretreated corn straw

  5. Performance, carcass and ruminal fermentation characteristics of heifers fed concentrates differing in energy level and cereal type (corn vs. wheat)

    Energy Technology Data Exchange (ETDEWEB)

    Carrasco, C.; Carro, M.D.; Fuentetaja, A.; Medel, P.

    2017-07-01

    A total of 144 beef heifers (218 ± 26.4 kg body weight) were housed in 24 pens (6 animals each) and used in a 168-day feedlot study to evaluate the influence of cereal type and energy level on performance, carcass quality and ruminal fermentation. Four concentrates were formulated according to a 2×2 factorial arrangement of treatments, with two energy levels (1,452 vs. 1,700 kcal net energy/kg) and two main cereals (wheat vs. corn). Concentrate and straw were offered ad libitum. Concentrate intake and body weight were recorded on days 42, 84, 126 and 168. Ruminal fluid was obtained by ruminocentesis from 3 heifers per pen on days 1, 84 and 168; and carcass weight, classification and yield, were determined in the same animals. Heifers fed high-energy diets had lower intake (6.97 vs. 7.29 kg fresh matter/d; p=0.011), and lower concentrate to gain ratio (5.15 vs. 5.66 kg/kg; p=0.002) than those fed low energy concentrates, and tended (p=0.069) to be heavier along the time. Neither carcass yield and classification, nor ruminal pH, volatile fatty acids nor NH3-N concentrations were affected (p>0.050) by energy level. Total volatile fatty acids concentration tended (p=0.070) to be greater in heifers fed corn-based than wheat-based concentrates. No energy level x cereal type interactions were observed. These results indicate that high energy concentrates decreased feed intake and feed conversion but had minor effects on carcass performance. Cereal type had no effects on performance and ruminal fermentation and no interactions between cereal type and energy were detected.

  6. Performance, carcass and ruminal fermentation characteristics of heifers fed concentrates differing in energy level and cereal type (corn vs. wheat)

    International Nuclear Information System (INIS)

    Carrasco, C.; Carro, M.D.; Fuentetaja, A.; Medel, P.

    2017-01-01

    A total of 144 beef heifers (218 ± 26.4 kg body weight) were housed in 24 pens (6 animals each) and used in a 168-day feedlot study to evaluate the influence of cereal type and energy level on performance, carcass quality and ruminal fermentation. Four concentrates were formulated according to a 2×2 factorial arrangement of treatments, with two energy levels (1,452 vs. 1,700 kcal net energy/kg) and two main cereals (wheat vs. corn). Concentrate and straw were offered ad libitum. Concentrate intake and body weight were recorded on days 42, 84, 126 and 168. Ruminal fluid was obtained by ruminocentesis from 3 heifers per pen on days 1, 84 and 168; and carcass weight, classification and yield, were determined in the same animals. Heifers fed high-energy diets had lower intake (6.97 vs. 7.29 kg fresh matter/d; p=0.011), and lower concentrate to gain ratio (5.15 vs. 5.66 kg/kg; p=0.002) than those fed low energy concentrates, and tended (p=0.069) to be heavier along the time. Neither carcass yield and classification, nor ruminal pH, volatile fatty acids nor NH3-N concentrations were affected (p>0.050) by energy level. Total volatile fatty acids concentration tended (p=0.070) to be greater in heifers fed corn-based than wheat-based concentrates. No energy level x cereal type interactions were observed. These results indicate that high energy concentrates decreased feed intake and feed conversion but had minor effects on carcass performance. Cereal type had no effects on performance and ruminal fermentation and no interactions between cereal type and energy were detected.

  7. FERMENTATION PROCESS CHARACTERISTICS OF DIFFERENT MAIZE SILAGE HYBRIDS

    Directory of Open Access Journals (Sweden)

    Daniel Bíro

    2009-03-01

    Full Text Available The aim of this study was to detect the fermentation process differences in different hybrid maize silage. We conserved in laboratory conditions hybrids of whole maize plants with different length of the vegetative period (FAO number. Maize hybrids for silage were harvested in the vegetation stage of the milk-wax maturity of corn and the content of dry matter was from 377.7 to 422.8 g.kg-1. The highest content of dry matter was typical for silages made from the hybrids with FAO number 310 (400.0 g.kg-1 and FAO 300a (400.4 g.kg-1. The content of desirable lactic acid ranged from 23.7 g.kg-1 of dry matter (FAO 350 to 58.9 g.kg-1 of dry matter (FAO 420. We detected the occurrence of undesirable butyric acid in silages from hybrids FAO 250, 300b, 310 and 380. The highest content of total alcohols we found in silages made from hybrid with FAO number 240 (25.2 g.kg-1 of dry matter. Ammonia contents were in tested silages from 0.153 (FAO 270 to 0.223 g.kg-1 of dry matter (FAO 240. The lowest value of silage titration acidity we analyzed in silage made from hybrid FAO 420 (3.66. We observed in maize silages with different length of plant maturity tested in the experiment differences in content of lactic acid, total alcohols, titration acidity, pH and content of fermentation products.

  8. Maize silk antibiotic polyphenol compounds and molecular genetic improvement of resistance to corn earworm (Helicoverpa zea Boddie) in sh2 sweet corn

    OpenAIRE

    Baozhu Guo; Ana Butrón; Brian T. Scully

    2010-01-01

    The flavor of sh2 super-sweet corn is preferred by consumers. Unfortunately, sh2 sweet corn has little genetic variation for insect resistance. In this paper we review the functions of two loci, p1 and a1. The P1 allele has a major role in sh2 sweet corn resistance to corn earworm, an allele that was lost in historical selection because of its pleiotropic effect on undesirable cob color and silk browning. The P1 allele has significant effects on biosyntheses of silk antibiotic compounds, mays...

  9. PV-wind hybrid system performance. A new approach and a case study

    International Nuclear Information System (INIS)

    Arribas, Luis; Cano, Luis; Cruz, Ignacio; Mata, Montserrat; Llobet, Ermen

    2010-01-01

    Until now, there is no internationally accepted guideline for the measurement, data exchange and analysis of PV-Wind Hybrid Systems. As there is a need for such a tool, so as to overcome the barrier that the lack of confidence due to the absence of reliability means for the development of the market of Hybrid Systems, an effort has been made to suggest one tool for PV-Wind Hybrid Systems. The suggested guidelines presented in this work are based on the existing guidelines for PV Systems, as a PV-Wind Hybrid system can be roughly thought of as a PV System to which wind generation has been added. So, the guidelines for PV Systems are valid for the PV-Wind System, and only the part referred to wind generation should be included. This has been the process followed in this work. The proposed method is applied to a case study, the CICLOPS Project, a 5 kW PV, 7.5 kW Wind Hybrid system installed at the Isolated Wind Systems Test Site that CIEMAT owns in CEDER (Soria, Spain). This system has been fully monitored through a year and the results of the monitoring activity, characterizing the long-term performance of the system are shown in this work. (author)

  10. PV-wind hybrid system performance. A new approach and a case study

    Energy Technology Data Exchange (ETDEWEB)

    Arribas, Luis; Cano, Luis; Cruz, Ignacio [Departamento de Energias Renovables, CIEMAT, Avda. Complutense 22, 28040 Madrid (Spain); Mata, Montserrat; Llobet, Ermen [Ecotecnia, Roc Boronat 78, 08005 Barcelona (Spain)

    2010-01-15

    Until now, there is no internationally accepted guideline for the measurement, data exchange and analysis of PV-Wind Hybrid Systems. As there is a need for such a tool, so as to overcome the barrier that the lack of confidence due to the absence of reliability means for the development of the market of Hybrid Systems, an effort has been made to suggest one tool for PV-Wind Hybrid Systems. The suggested guidelines presented in this work are based on the existing guidelines for PV Systems, as a PV-Wind Hybrid system can be roughly thought of as a PV System to which wind generation has been added. So, the guidelines for PV Systems are valid for the PV-Wind System, and only the part referred to wind generation should be included. This has been the process followed in this work. The proposed method is applied to a case study, the CICLOPS Project, a 5 kW PV, 7.5 kW Wind Hybrid system installed at the Isolated Wind Systems Test Site that CIEMAT owns in CEDER (Soria, Spain). This system has been fully monitored through a year and the results of the monitoring activity, characterizing the long-term performance of the system are shown in this work. (author)

  11. Sustainable Dry Land Management Model on Corn Agribusiness System

    Directory of Open Access Journals (Sweden)

    Yulia Pujiharti

    2008-01-01

    Full Text Available The study aimed at building model of dry land management. Dynamic System Analysis was used to build model and Powersim 2.51 version for simulating. The parameter used in model were fertilizer (urea, SP-36, ACL, productivity (corn, cassava, mungbean, soil nutrient (N, P, K, crop nutrient requirements (corn, cassava, mungbean, mucuna, price (corn, cassava, mungbeans corn flour, feed, urea, SP-36, KCl, food security credit, area planted of (maize, cassava, mungbean, area harvested of (maize, cassava, mungbean, (corn, cassava, mungbean production, wages and farmer income. Sustainable indicator for ecology aspect was soil fertility level, economic aspects were productivity and farmer income, and social aspects were job possibility and traditions. The simulation result indicated that sustainable dry land management can improve soil fertility and increase farmer revenue, became sustainable farming system and farmer society. On the other hand, conventional dry land management decreased soil fertility and yield, caused farmer earnings to decrease and a farm activity could not be continued. Fertilizer distribution did not fulfill farmer requirement, which caused fertilizer scarcity. Food security credit increased fertilizer application. Corn was processed to corn flour or feed to give value added.

  12. On the Performance of RF-FSO Links with and without Hybrid ARQ

    KAUST Repository

    Makki, Behrooz

    2016-04-01

    This paper studies the performance of hybrid radiofrequency (RF) and free-space optical (FSO) links assuming perfect channel state information (CSI) at the receiver. Considering the cases with and without hybrid automatic repeat request (HARQ), we derive closed-form expressions for the message decoding probabilities as well as the throughput and the outage probability of the RF-FSO setups. We also evaluate the effect of adaptive power allocation and different channel conditions on the throughput and the outage probability. The results show the efficiency of the RF-FSO links in different conditions.

  13. Real-world environmental performance of hybrid vehicles

    NARCIS (Netherlands)

    Winkel, R.G.; Hendriksen, P.; Vermeulen, R.J.; Foster, D.L.

    2001-01-01

    With the further development and market introduction of hybrid vehicle technologies in recent years we are now at a stage where we can test whether the proclaimed advantages of hybrid propulsion in terms of fuel efficiency and emission reduction are actually realised. An important issue is that

  14. Performance of hybrid nano-micro reinforced mg metal matrix composites brake calliper: simulation approach

    Science.gov (United States)

    Fatchurrohman, N.; Chia, S. T.

    2017-10-01

    Most commercial vehicles use brake calliper made of grey cast iron (GCI) which possesses heavy weight. This contributes to the total weight of the vehicle which can lead to higher fuel consumption. Another major problem is GCI calliper tends to deflect during clamping action, known as “bending of bridge”. This will result in extended pedal travel. Magnesium metal matrix composites (Mg-MMC) has a potential application in the automotive industry since it having a lower density, higher strength and very good modulus of elasticity as compared to GCI. This paper proposed initial development of hybrid Mg-MMC brake calliper. This was achieved by analyzing the performance of hybrid nano-micro reinforced Mg-MMC and comparing with the conventional GCI brake calliper. It was performed using simulation in ANSYS, a finite element analysis (FEA) software. The results show that hybrid Mg-MMC has better performance in terms of reduction the weight of the brake calliper, reduction in total deformation/deflection and better ability to withstand equivalent elastic strain.

  15. Multipass rotary shear comminution process to produce corn stover particles

    Energy Technology Data Exchange (ETDEWEB)

    Dooley, James H; Lanning, David N

    2015-04-14

    A process of comminution of corn stover having a grain direction to produce a mixture of corn stover, by feeding the corn stover in a direction of travel substantially randomly to the grain direction one or more times through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of corn stover travel.

  16. Uptake and distribution of cadmium in corn

    International Nuclear Information System (INIS)

    Peel, J.W.; Vetter, R.J.; Christian, J.E.; Kessler, W.V.; McFee, W.W.

    1978-01-01

    The uptake and distribution of cadmium in corn (Zea mays) treated at various time intervals after planting and sampled at various times after treatment were measured. Cadmium was found to accumulate in all parts sampled. As shown in field studies, stems and leaves generally concentrated more cadmium than did husks, cobs, kernels, silks, or tassels. Samples of stems and leaves from corn treated 23 days after planting and sampled 5 days later exhibited higher concentrations of cadmium than samples taken 25, 45, 65, or 85 days after treatment. Concentrations generally decreased with time. Greenhouse studies showed that corn exposed to cadmium for the longest period of time accumulated the greatest total cadmium. The highest cadmium concentrations were found in the base or lowest leaves sampled 45 days after planting; this suggests a useful technique for quick screening corn crops for cadmium pollution

  17. Mechanochemical preparation of polydiphenylamine and its electrochemical performance in hybrid supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Palaniappan, SP. [Department of Industrial Chemistry, School of Chemistry, Alagappa University, Alagappapuram, Karaikudi 630003, Tamil Nadu (India); Manisankar, P., E-mail: pms11@rediffmail.com [Department of Industrial Chemistry, School of Chemistry, Alagappa University, Alagappapuram, Karaikudi 630003, Tamil Nadu (India)

    2011-07-01

    Highlights: > For the first time, a simple to adopt, greener, rapid and efficient alternative route was successfully developed for preparing different PDPA salts. > For the first time, a judicial attempt was made to evaluate the performance of mechanochemically prepared PDPA-H{sub 2}SO{sub 4} as cathode material in asymmetric hybrid supercapacitors. > The results obtained are highly promising and the physicochemical properties of PDPA salts could be fine-tuned in the future for large scale applications in energy storage devices. - Abstract: A simple mechanochemical route for the synthesis of high quality inorganic anion doped polydiphenylamines (PDPAs) is reported in this article. Elemental analysis performed for the PDPAs indicated the presence of dopant anions in the polymeric chain. PDPA prepared in the presence of 96 wt% H{sub 2}SO{sub 4} (PDPA-H{sub 2}SO{sub 4}) was found to be better doped than the other polymeric salts. Spectroscopic profiles of the polymers showed that the PDPAs were in a doped conducting state. The X-ray diffraction (XRD) pattern of the as-prepared polymeric powders revealed the presence of more crystalline phases in PDPA-H{sub 2}SO{sub 4}. Field emission scanning electron microscopic (FESEM) images highlighted the formation of inorganic anion doped PDPA particles with different sizes (80-100 nm). Electrochemical studies performed for the polymeric particles depicted the redox behavior and good electrochemical activity of PDPA salts. Thermogravimetric analysis (TGA)/differential thermal analysis (DTA) proved that all the PDPA salts were thermally stable up to 300 deg. C. The electrochemical performance of PDPA-H{sub 2}SO{sub 4} in hybrid supercapacitors was evaluated due to its superior physicochemical properties. The maximum specific capacitance of the hybrid supercapacitor constructed out of PDPA-H{sub 2}SO{sub 4} powder was found to be 108 F g{sup -1}.

  18. Performance Assessment of a Hybrid Solar-Geothermal Air Conditioning System for Residential Application: Energy, Exergy, and Sustainability Analysis

    OpenAIRE

    Abbasi, Yasser; Baniasadi, Ehsan; Ahmadikia, Hossein

    2016-01-01

    This paper investigates the performance of a ground source heat pump that is coupled with a photovoltaic system to provide cooling and heating demands of a zero-energy residential building. Exergy and sustainability analyses have been conducted to evaluate the exergy destruction rate and SI of different compartments of the hybrid system. The effects of monthly thermal load variations on the performance of the hybrid system are investigated. The hybrid system consists of a vertical ground sour...

  19. Performance Analysis for One-Step-Ahead Forecasting of Hybrid Solar and Wind Energy on Short Time Scales

    Directory of Open Access Journals (Sweden)

    Jing Huang

    2018-05-01

    Full Text Available With ever increasing demand for electricity and the huge potential of renewable energy, an increasing number of renewable-energy sources are being used to generate electricity. However, due to the intermittency of renewable-energy generation, many researchers try to overcome the variable nature of renewable energy. A hybrid renewable-energy system is one possible way to introduce smoothing of the supply. Many hybrid renewable-energy studies focus on system optimization and management. This paper mainly researches the performance prediction accuracy of a hybrid solar and wind system. Through a mixed autoregressive and dynamical system model, we test the predictability of the hybrid system and compare it with individual solar and wind series forecasting. After error analysis, the predictability of the hybrid system shows a better performance than solar or wind for Adelaide global solar radiation and Starfish Hill wind farm data. The prediction errors were reduced by 13% to more than 30% according to various error analyses. This result indicates an advantage of the hybrid solar and wind system compared to solar and wind systems taken individually.

  20. Hybrid Force and Position Control Strategy of Robonaut Performing Object Transfer Task

    Directory of Open Access Journals (Sweden)

    Chen Gang

    2018-01-01

    Full Text Available This paper proposes a coordinated hybrid force/position control strategy of robonaut performing object transfer operation. Firstly, the constraint relationships between robonaut and object are presented. Base on them, the unified dynamic model of the robonaut and object is established to design the hybrid force/position control method. The movement, the internal force and the external constraint force of the object are considered as the control targets of the control system. Finally, a MATLAB simulation of the robonaut performing object transfer task verifies the correctness and effectiveness of the proposed method. The results show that all the targets can be control accurately by using the method proposed in this paper. The presented control method can control both internal and external forces while maintaining control accuracy, which is a common control strategy.

  1. Winter rye cover crop effect on corn seedling pathogens

    Science.gov (United States)

    Cover crops have been grown successfully in Iowa, but sometimes a cereal rye cover crop preceding corn can reduce corn yields. Our research examines the effect of a rye cover crop on infections of the succeeding corn crop by soil fungal pathogens. Plant measurements included: growth stage, height, r...

  2. Performance Characteristics of Hybrid MPI/OpenMP Scientific Applications on a Large-Scale Multithreaded BlueGene/Q Supercomputer

    KAUST Repository

    Wu, Xingfu; Taylor, Valerie

    2013-01-01

    In this paper, we investigate the performance characteristics of five hybrid MPI/OpenMP scientific applications (two NAS Parallel benchmarks Multi-Zone SP-MZ and BT-MZ, an earthquake simulation PEQdyna, an aerospace application PMLB and a 3D particle-in-cell application GTC) on a large-scale multithreaded Blue Gene/Q supercomputer at Argonne National laboratory, and quantify the performance gap resulting from using different number of threads per node. We use performance tools and MPI profile and trace libraries available on the supercomputer to analyze and compare the performance of these hybrid scientific applications with increasing the number OpenMP threads per node, and find that increasing the number of threads to some extent saturates or worsens performance of these hybrid applications. For the strong-scaling hybrid scientific applications such as SP-MZ, BT-MZ, PEQdyna and PLMB, using 32 threads per node results in much better application efficiency than using 64 threads per node, and as increasing the number of threads per node, the FPU (Floating Point Unit) percentage decreases, and the MPI percentage (except PMLB) and IPC (Instructions per cycle) per core (except BT-MZ) increase. For the weak-scaling hybrid scientific application such as GTC, the performance trend (relative speedup) is very similar with increasing number of threads per node no matter how many nodes (32, 128, 512) are used. © 2013 IEEE.

  3. Performance Characteristics of Hybrid MPI/OpenMP Scientific Applications on a Large-Scale Multithreaded BlueGene/Q Supercomputer

    KAUST Repository

    Wu, Xingfu

    2013-07-01

    In this paper, we investigate the performance characteristics of five hybrid MPI/OpenMP scientific applications (two NAS Parallel benchmarks Multi-Zone SP-MZ and BT-MZ, an earthquake simulation PEQdyna, an aerospace application PMLB and a 3D particle-in-cell application GTC) on a large-scale multithreaded Blue Gene/Q supercomputer at Argonne National laboratory, and quantify the performance gap resulting from using different number of threads per node. We use performance tools and MPI profile and trace libraries available on the supercomputer to analyze and compare the performance of these hybrid scientific applications with increasing the number OpenMP threads per node, and find that increasing the number of threads to some extent saturates or worsens performance of these hybrid applications. For the strong-scaling hybrid scientific applications such as SP-MZ, BT-MZ, PEQdyna and PLMB, using 32 threads per node results in much better application efficiency than using 64 threads per node, and as increasing the number of threads per node, the FPU (Floating Point Unit) percentage decreases, and the MPI percentage (except PMLB) and IPC (Instructions per cycle) per core (except BT-MZ) increase. For the weak-scaling hybrid scientific application such as GTC, the performance trend (relative speedup) is very similar with increasing number of threads per node no matter how many nodes (32, 128, 512) are used. © 2013 IEEE.

  4. Operation Performance Evaluation of Power Grid Enterprise Using a Hybrid BWM-TOPSIS Method

    Directory of Open Access Journals (Sweden)

    Peipei You

    2017-12-01

    Full Text Available Electricity market reform is in progress in China, and the operational performance of power grid enterprises are vital for its healthy and sustainable development in the current electricity market environment. In this paper, a hybrid multi-criteria decision-making (MCDM framework for operational performance evaluation of a power grid enterprise is proposed from the perspective of sustainability. The latest MCDM method, namely the best-worst method (BWM was employed to determine the weights of all criteria, and the technique for order preference by similarity to an ideal solution (TOPSIS was applied to rank the operation performance of a power grid enterprise. The evaluation index system was built based on the concept of sustainability, which includes three criteria (namely economy, society, and environment and seven sub-criteria. Four power grid enterprises were selected to perform the empirical analysis, and the results indicate that power grid enterprise A1 has the best operation performance. The proposed hybrid BWM-TOPSIS-based framework for operation performance evaluation of a power grid enterprise is effective and practical.

  5. Performance assessment of a multi-fuel hybrid engine for future aircraft

    NARCIS (Netherlands)

    Yin, F.; Gangoli Rao, A.; Bhat, Abhishek; Chen, Min

    2018-01-01

    This paper presents the performance assessment of a novel turbofan engine using two energy sources: Liquid Natural Gas (LNG) and kerosene, called Multi-Fuel Hybrid Engine (MFHE). The MFHE is a new engine concept consisting of several novel features, such as a contra-rotating fan to sustain

  6. Determining the Feasibility of Yellow Corn Production in Mexico

    OpenAIRE

    Mejia, Maria; Peel, Derrell S.

    2009-01-01

    Mexico produces large quantities of white corn for human consumption. Yellow corn production, mostly used for feed, has increased lately. Driving factors include higher domestic demand (growing livestock industry) and greater international demand (ethanol industry). This study uses enterprise budgeting to determine the feasibility of producing yellow corn in Mexico.

  7. Investigations on self-starting and performance characteristics of simple H and hybrid H-Savonius vertical axis wind rotors

    International Nuclear Information System (INIS)

    Bhuyan, S.; Biswas, A.

    2014-01-01

    Highlights: • Hybrid H-Savonius vertical axis wind rotor for built-in environmental wind speeds. • Self-starting characteristics of unsymmetrical H-rotor and Hybrid H-Savonius rotor. • Comparisons between unsymmetrical H-rotor and Hybrid rotor at same experimental conditions. • Insight of the performances of optimum hybrid H-Savonius rotor. • Higher power performance of the optimum rotor compared with some existing VAWT rotors. - Abstract: With recent surge in fossil fuel prices and demands for renewable energy sources, vertical axis wind turbine (VAWT) technologies have emerged out as one of the prime growing sector for small-scale power generation in the built environment. In such an environment, self-starting and high performances are of utmost importance. Amongst all VAWT designs, H-rotor, being a lift-driven device, exhibits a high power coefficient. However, it suffers from poor starting behavior due to its conventional symmetrical NACA airfoil blades. The objective of the present study is to design a VAWT rotor that possesses both self-starting and high power coefficient simultaneously. For this, a three bladed H-rotor with unsymmetrical cambered S818 airfoil blades is investigated, which shows self-starting characteristics at many of the azimuthal angles. However to make the rotor completely self-starting, the same H-rotor is incorporated in a hybrid system with Savonius rotor as its starter. It is found that the hybrid design fully exhibits self-starting capability at all azimuthal positions, signified by the positive static torque coefficient values. For improving power performance of the hybrid rotor, the same is subjected to rigorous experimentations on the wind tunnel at different Reynolds numbers (Re) between 1.44 × 10 5 and 2.31 × 10 5 for five different overlap conditions in the Savonius rotor part. The performance coefficients of the hybrid rotor are compared with the simple H-rotor. Out of all the designs investigated, the maximum Cp

  8. Performance Analysis of a MCFC/MGT Hybrid Power System Bi-Fueled by City Gas and Biogas

    Directory of Open Access Journals (Sweden)

    Hongyu Huang

    2015-06-01

    Full Text Available This study evaluates the performance of a molten carbonate fuel cell and micro gas turbine (MCFC/MGT hybrid power system bi-fueled by city gas and biogas. The performance of the MCFC/MGT hybrid power system and MFCF/MGT hybrid power system response have been investigated experimentally and numerically. Results show that the MCFC, steam reformer, and catalytic combustor models are in agreement with the experimental results of the system fueled by city gas only and the system bi-fueled by city gas and biogas. The MFCF/MGT hybrid power system can have manifest operation with the addition of biogas at a flow rate of up to 150.0 Nm3·h−1, which is about 50% of the overall input heat value. In addition, the MCFC and MGT outputs decrease with the increase in the flow rate of added biogas, with an overall power generation efficiency ranging from 39.0% to 42.0%. Furthermore, the MCFC/MGT hybrid power system can be operated stably both at low amplitude with slow current change and large amplitude with rapid power conditions. Finally, the MCFC/MGT hybrid system bi-fueled by city gas and biogas may be applicable to the energy supply of the micro–grid network.

  9. Effect of eastern gamagrass on fall armyworm and corn earworm development

    Science.gov (United States)

    The fall armyworm, Spodoptera frugiperda (J.E. Smith) and the corn earworm, Helicoverpa zea (Boddie) are two important corn pests in the southern U.S. states. Effect of the leaves from the corn relative, the Eastern gamagrass (Tripsacum dactyloides L.) on fall armyworm and corn earworm development ...

  10. Preparation, characterisation, engine performance and emission characteristics of coconut oil based hybrid fuels

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Pranil J.; Singh, Anirudh [Division of Physics, School of Engineering and Physics, Faculty of Science, Technology and Environment, University of the South Pacific, 325 Fletcher Road, Suva (Fiji); Khurma, Jagjit [Division of Chemistry, School of Biological, Chemical and Environmental Sciences, Faculty of Science, Technology and Environment, University of the South Pacific, Suva (Fiji)

    2010-09-15

    In this study, hybrid fuels consisting of coconut oil, aqueous ethanol and a surfactant (butan-1-ol) were prepared and tested as a fuel in a direct injection diesel engine. After determining fuel properties such as the density, viscosity and gross calorific values of these fuels, they were used to run a diesel engine. The engine performance and exhaust emissions were investigated and compared with that of diesel. The experimental results show that the efficiency of the hybrid fuels is comparable to that of diesel. As the viscosity of the hybrid fuels decreased and approached that of diesel, the efficiency increased progressively towards that of diesel. The exhaust emissions were lower than those for diesel, except carbon monoxide emissions, which increased. Hence, it is concluded that these hybrid fuels can be used successfully as an alternative fuel in diesel engines without any modifications. Their completely renewable nature ensures that they are environmentally friendly with regard to their emissions characteristics. (author)

  11. The Role of Frequent Short Exams in Improving Student Performance in Hybrid Global Business Classes

    Science.gov (United States)

    Nakos, George; Whiting, Anita

    2018-01-01

    The authors investigate whether frequent in class exams can improve the performance of students in hybrid global business courses. An experiment was conducted in three hybrid sections of a global business course exposing students to short in class exams. The expectation of a short exam forces students to watch the online lectures and study the…

  12. Performance dependence of hybrid x-ray computed tomography/fluorescence molecular tomography on the optical forward problem.

    Science.gov (United States)

    Hyde, Damon; Schulz, Ralf; Brooks, Dana; Miller, Eric; Ntziachristos, Vasilis

    2009-04-01

    Hybrid imaging systems combining x-ray computed tomography (CT) and fluorescence tomography can improve fluorescence imaging performance by incorporating anatomical x-ray CT information into the optical inversion problem. While the use of image priors has been investigated in the past, little is known about the optimal use of forward photon propagation models in hybrid optical systems. In this paper, we explore the impact on reconstruction accuracy of the use of propagation models of varying complexity, specifically in the context of these hybrid imaging systems where significant structural information is known a priori. Our results demonstrate that the use of generically known parameters provides near optimal performance, even when parameter mismatch remains.

  13. Cover crop management in the weed control and productive performance in cornManejo de plantas de cobertura no controle de plantas daninhas e desempenho produtivo da cultura do milho

    Directory of Open Access Journals (Sweden)

    Pedro Valério Dutra de Moraes

    2013-05-01

    Full Text Available Objetivou-se avaliar espécies vegetais com potencial alelopático, associados às práticas de manejo e ao uso de herbicida nicosulfuron, no controle de plantas daninhas e nos componentes de produtividade da cultura do milho. O delineamento experimental utilizado foi em blocos ao acaso, com quatro repetições. O experimento foi composto por três fatores: espécies de cobertura, manejo das coberturas e aplicação ou não de herbicida nicosulfuron em pós-emergência. As variáveis avaliadas foram: número de plantas daninhas, número de fileiras de grãos, número de grãos por fileira, número de grãos por espiga e produtividade de grãos de milho. A cobertura de azevém, em geral, reduz o número de plantas daninhas emergidas e favorece o desempenho produtivo do milho. O manejo das plantas de cobertura com roçada e retirada da palha reduz a produtividade do milho. A maior produtividade do milho, foi observada com a aplicação de nicosulfuron em pós-emergência, independente da cultura de cobertura ou do manejo adotado. The objective of the study was evaluate the allelopathy of cover species, associated to management practices and use of nicosulfuron herbicide on the productive performance of corn. The experimental design consisted of complete randomized block with four replications. The treatments were: cover species, cover management and application or not of post-emergence herbicide. The variables evaluated were: number of weeds, number of rows kernels, number of kernels rows, number of kernels ear and grain yield of corn. Lolium multiflorum, reduced the number of emerged weeds and provides the best results in productive performance. The management simulated grazing, does not favor the yield of corn. The application of nicosulfuron in post-emergence, along with the allelopathic activity increases the productive performance of corn, regardless of cover crop or soil management.

  14. Enzymatic digestibility and ethanol fermentability of AFEX-treated starch-rich lignocellulosics such as corn silage and whole corn plant

    Directory of Open Access Journals (Sweden)

    Thelen Kurt D

    2010-06-01

    Full Text Available Abstract Background Corn grain is an important renewable source for bioethanol production in the USA. Corn ethanol is currently produced by steam liquefaction of starch-rich grains followed by enzymatic saccharification and fermentation. Corn stover (the non-grain parts of the plant is a potential feedstock to produce cellulosic ethanol in second-generation biorefineries. At present, corn grain is harvested by removing the grain from the living plant while leaving the stover behind on the field. Alternatively, whole corn plants can be harvested to cohydrolyze both starch and cellulose after a suitable thermochemical pretreatment to produce fermentable monomeric sugars. In this study, we used physiologically immature corn silage (CS and matured whole corn plants (WCP as feedstocks to produce ethanol using ammonia fiber expansion (AFEX pretreatment followed by enzymatic hydrolysis (at low enzyme loadings and cofermentation (for both glucose and xylose using a cellulase-amylase-based cocktail and a recombinant Saccharomyces cerevisiae 424A (LNH-ST strain, respectively. The effect on hydrolysis yields of AFEX pretreatment conditions and a starch/cellulose-degrading enzyme addition sequence for both substrates was also studied. Results AFEX-pretreated starch-rich substrates (for example, corn grain, soluble starch had a 1.5-3-fold higher enzymatic hydrolysis yield compared with the untreated substrates. Sequential addition of cellulases after hydrolysis of starch within WCP resulted in 15-20% higher hydrolysis yield compared with simultaneous addition of hydrolytic enzymes. AFEX-pretreated CS gave 70% glucan conversion after 72 h of hydrolysis for 6% glucan loading (at 8 mg total enzyme loading per gram glucan. Microbial inoculation of CS before ensilation yielded a 10-15% lower glucose hydrolysis yield for the pretreated substrate, due to loss in starch content. Ethanol fermentation of AFEX-treated (at 6% w/w glucan loading CS hydrolyzate (resulting

  15. Enzymatic digestibility and ethanol fermentability of AFEX-treated starch-rich lignocellulosics such as corn silage and whole corn plant

    Science.gov (United States)

    2010-01-01

    Background Corn grain is an important renewable source for bioethanol production in the USA. Corn ethanol is currently produced by steam liquefaction of starch-rich grains followed by enzymatic saccharification and fermentation. Corn stover (the non-grain parts of the plant) is a potential feedstock to produce cellulosic ethanol in second-generation biorefineries. At present, corn grain is harvested by removing the grain from the living plant while leaving the stover behind on the field. Alternatively, whole corn plants can be harvested to cohydrolyze both starch and cellulose after a suitable thermochemical pretreatment to produce fermentable monomeric sugars. In this study, we used physiologically immature corn silage (CS) and matured whole corn plants (WCP) as feedstocks to produce ethanol using ammonia fiber expansion (AFEX) pretreatment followed by enzymatic hydrolysis (at low enzyme loadings) and cofermentation (for both glucose and xylose) using a cellulase-amylase-based cocktail and a recombinant Saccharomyces cerevisiae 424A (LNH-ST) strain, respectively. The effect on hydrolysis yields of AFEX pretreatment conditions and a starch/cellulose-degrading enzyme addition sequence for both substrates was also studied. Results AFEX-pretreated starch-rich substrates (for example, corn grain, soluble starch) had a 1.5-3-fold higher enzymatic hydrolysis yield compared with the untreated substrates. Sequential addition of cellulases after hydrolysis of starch within WCP resulted in 15-20% higher hydrolysis yield compared with simultaneous addition of hydrolytic enzymes. AFEX-pretreated CS gave 70% glucan conversion after 72 h of hydrolysis for 6% glucan loading (at 8 mg total enzyme loading per gram glucan). Microbial inoculation of CS before ensilation yielded a 10-15% lower glucose hydrolysis yield for the pretreated substrate, due to loss in starch content. Ethanol fermentation of AFEX-treated (at 6% w/w glucan loading) CS hydrolyzate (resulting in 28 g/L ethanol

  16. Milhos com diferentes texturas de endosperma e adição de alfa-amilase na dieta de leitões The effect of corn kernel texture and alpha-amylase addition in performance and digestibility of diets for weaned pigs

    Directory of Open Access Journals (Sweden)

    Vanessa Piovesan

    2011-11-01

    Full Text Available Dois experimentos foram realizados para avaliar a influência de milhos com diferentes texturas de endosperma e adição de alfa amilase na digestibilidade de dietas e no desempenho de leitões na fase de creche. No ensaio de digestibilidade, foram usados 12 leitões castrados (7,96±0,31kg, alojados individualmente em gaiolas de metabolismo, enquanto no desempenho utilizaram-se 75 leitões (7,87±0,67kg distribuídos em 15 gaiolas de creche. Nos dois experimentos, os tratamentos consistiram de três dietas formuladas para serem isonutritivas, mas com milhos de diferentes texturas e adição ou não de alfa amilase, conforme descrito a seguir: 1. grãos de milho semi-dentado; 2. grãos de milho duro e; 3. grãos de milho duro + alfa-amilase. Os resultados de metabolismo mostraram que os valores de energia digestível (ED e metabolizável (EM das dietas foram influenciados pelos tipos de milho, sendo o semi-dentado superior (P0,05 entre os tratamentos no consumo de ração, ganho de peso e/ou conversão alimentar. Dietas com milho duro ou semi-dentado e adição de alfa-amilase não alteram o desempenho dos leitões. Por outro lado, dietas contendo milho semi-dentado apresentam maior energia digestível que dietas com milho duro e a adição de alfa-amilase aumenta a energia de dietas com milho duro.Two experiments were carried out to evaluate the effects of diets with different corn grain textures and amylase supplementation on nutrients digestibility and nursery piglets' performance. Twelve castrated piglets (7.96±0.31kg were individually housed in metabolic crates and 75 piglets (7.87±0.67kg penned in 15 nursery pens. In both experiments the treatments consisted of three isonutritive diets: 1. semi dent corn grain; 2. flint corn grain, and 3. flint corn grain + amylase. There was effect of treatments (P0.05 the performance characteristics studied. In conclusion, diets with flint or semi dent corns and amylase supplementation did not improve

  17. Climate forecasts for corn producer decision making

    Science.gov (United States)

    Corn is the most widely grown crop in the Americas, with annual production in the United States of approximately 332 million metric tons. Improved climate forecasts, together with climate-related decision tools for corn producers based on these improved forecasts, could substantially reduce uncertai...

  18. Environmental performance of advanced hybrid energy storage systems for electric vehicle applications

    International Nuclear Information System (INIS)

    Sanfélix, Javier; Messagie, Maarten; Omar, Noshin; Van Mierlo, Joeri; Hennige, Volker

    2015-01-01

    Highlights: • The environmental impact of advanced energy storage systems is assessed. • The methodology used is Life Cycle Assessment following the ISO 14040 and 14044. • Twelve impact categories are assessed to avoid burden shifting. • Increasing the efficiency and extending the lifetime benefits the environmental performance. • The results show that there are hot spots where to act and reduce the overall impact. - Abstract: In this paper the environmental performance of an advanced hybrid energy storage system, comprising high power and high energy lithium iron phosphate cells, is compared with a stand alone battery concept composed of lithium manganese oxide cells. The methodology used to analyse the environmental impacts is Life Cycle Assessment (LCA). The manufacturing, use phase and end-of-life of the battery packs are assessed for twelve impact categories. The functional unit is 1 km driven under European average conditions. The present study assesses the environmental performance of the two battery packs for two scenarios: scenario 1 with a vehicle total drive range of 150,000 km and scenario 2 with total driving range of the car of 300,000 km. The results of scenario 1 show that the increased efficiency of the hybrid system reduces, in general, the environmental impact during the use stage, although the manufacturing stage has higher impact than the benchmark. Scenario 2 shows how the extended lifetime of the hybrid system benefits the emissions per km driven

  19. Experimental analysis and performance evaluation of a tandem photovoltaic–thermoelectric hybrid system

    International Nuclear Information System (INIS)

    Kossyvakis, D.N.; Voutsinas, G.D.; Hristoforou, E.V.

    2016-01-01

    Highlights: • Experimental and theoretical investigation of a PV–TEG system has been conducted. • Poly-Si and dye-sensitized solar cells have been employed. • Thermoelectric generators of different thermoelement length have been tested. • A wide range considering cell’s operating temperature has been examined. - Abstract: Although photovoltaics have been established as the dominant technology considering the field of solar energy conversion systems, issues regarding their relatively low efficiency still remain practically unsolved. Very recently, the possibility of combining photovoltaic (PV) cells and thermoelectric generators (TEGs) in hybrid systems, as a means of improving the overall conversion efficiency, has attracted particular attention. In this paper, the performance of a tandem PV–TEG hybrid, employing poly-Si as well as dye-sensitized solar cells, has been examined experimentally. Thermoelectric devices of different thermoelement geometry have been tested in order to identify the corresponding performance effect. In addition, the outcomes of the experimental process have been exploited in order to evaluate the performance of the system under real operating conditions. The analysis conducted indicates that the utilization of TEGs with shorter thermoelements results in enhanced power output levels, when conditions of actual operation are considered. Moreover, although improved power output is obtained by the setup employing the polycrystalline cell, dye-sensitized technology could become particularly attractive when the incorporation of solar cells in PV–TEG hybrids operating under conditions of elevated temperature is examined.

  20. Size reduction of high- and low-moisture corn stalks by linear knife grid system

    Energy Technology Data Exchange (ETDEWEB)

    Igathinathane, C. [Agricultural and Biological Engineering Department, 130 Creelman Street, Mississippi State University, Mississippi State, Mississippi 39762 (United States); Womac, A.R. [Department of Biosystems Engineering and Soil Science, 2506 E. J. Chapman Drive, The University of Tennessee, Knoxville, Tennessee 37996 (United States); Sokhansanj, S. [Oak Ridge National Laboratory, Environmental Sciences Division, Oak Ridge, P. O. Box 2008, Tennessee 37831 (United States); Narayan, S. [First American Scientific Company, 100 Park Royal South West Vancouver, British Columbia, V7T 1A2 (Canada)

    2009-04-15

    High- and low-moisture corn stalks were tested using a linear knife grid size reduction device developed for first-stage size reduction. The device was used in conjunction with a universal test machine that quantified shearing stress and energy characteristics for forcing a bed of corn stalks through a grid of sharp knives. No published engineering performance data for corn stover with similar devices are available to optimize performance; however, commercial knife grid systems exist for forage size reduction. From the force-displacement data, mean and maximum ultimate shear stresses, cumulative and peak mass-based cutting energies for corn stalks, and mean new surface area-based cutting energies were determined from 4-5 refill runs at two moisture contents (78.8% and 11.3% wet basis), three knife grid spacings (25.4, 50.8, and 101.6 mm), and three bed depths (50.8, 101.6, and 152.4 mm). In general, the results indicated that peak failure load, ultimate shear stress, and cutting energy values varied directly with bed depth and inversely with knife grid spacing. Mean separation analysis established that high- and low-moisture conditions and bed depths {>=} 101.6 mm did not differ significantly (P < 0.05) for ultimate stress and cutting energy values, but knife grid spacing were significantly different. Linear knife grid cutting energy requirements for both moisture conditions of corn stalks were much smaller than reported cutting energy requirements. Ultimate shear stress and cutting energy results of this research should aid the engineering design of commercial scale linear knife gird size reduction equipment for various biomass feedstocks. (author)

  1. 7 CFR 457.129 - Fresh market sweet corn crop insurance provisions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Fresh market sweet corn crop insurance provisions. 457... sweet corn crop insurance provisions. The fresh market sweet corn crop insurance provisions for the 2008... Reinsured Policies Fresh Market Sweet Corn Crop Provisions 1. Definitions Allowable cost.—The dollar amount...

  2. Photoacoustic spectroscopy applied to the study of the influence of laser irradiation on corn seeds

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Aguilar, C.; Michtchenko, A. [Instituto Politecnico Nacional (Mexico); Carballo, A. [Colegio de Postgraduados, Programa de Semillas (IREGEP) (Mexico); Cruz-Orea, A. [Centro de Investigacion y de Estudios Avanzados-IPN (Mexico); Ivanov, R. [Universidad Autonoma de Zacatecas, Unidad Academia de Fisica (Mexico); San Martin Martinez, E. [Centro de Investigacion en ciencia Aplicada y Tecnologia Avanzada-IPN (Mexico)

    2005-06-01

    In the present study we were interested in the effects of low intensity laser irradiation on hybrid corn seeds CL{sub 1} x CL{sub 4} when these seeds were exposed to different laser intensities and irradiation times. In order to observe qualitative differences in chlorophyll a and b optical absorption spectra of seedling's leaves, whose seeds were irradiated and non irradiated, were obtained by using photoacoustic spectroscopy (PAS). A randomized complete blocks experimental design with three replications was used. The experimental unit included 10 seeds, from which we randomly choose three seedlings. The variance analysis (ANOVA) for both chlorophylls revealed significant (P < 0.05) differences among treatments. (authors)

  3. DESIGN AND THERMAL PERFORMANCE OF THE SOLAR BIOMASS HYBRID DRYER FOR CASHEW DRYING

    Directory of Open Access Journals (Sweden)

    Saravanan Dhanuskodi

    2014-12-01

    Full Text Available Drying of Cashew nut to remove testa is one of the most energy-intensive processes of cashew nut process industry. For this reason a hybrid dryer consisting of a solar flat plate collector, a biomass heater and a drying chamber is designed and fabricated. 40 kg of Cashew nut with initial moisture of 9 % is used in the experiment. The performance test of the dryer is carried out in two modes of operation: hybrid-forced convection and hybrid-natural convection. Drying time and drying efficiency during these two modes of operation are estimated and compared with the sun drying. The system is capable of attaining drying temperature between 50º and 70ºC. In the hybrid forced drying, the required moisture content of 3% is achieved within 7 hours and the average system efficiency is estimated as 5.08%. In the hybrid natural drying, the required moisture content is obtained in 9 hours and the average system efficiency is 3.17%. The fuel consumption during the drying process is 0.5 kg/hr and 0.75 kg/hr for forced mode and natural mode, respectively. The drying process in the hybrid forced mode of operation is twice faster than the sun drying. The dryer can be operated in any climatic conditions: as a solar dryer on normal sunny days, as a biomass dryer at night time and as a hybrid dryer on cloudy days. Based on the experimental study, it is concluded that the developed hybrid dryer is suitable for small scale cashew nut farmers in rural areas of developing countries.

  4. Effects of cellulase supplementation to corn soybean meal-based diet on the performance of sows and their piglets.

    Science.gov (United States)

    Upadhaya, Santi D; Lee, Sang In; Kim, In Ho

    2016-07-01

    A total of 15 primiparous sows (Landrace × Yorkshire) and their litters were used in the current study to evaluate the efficacy of cellulase supplementation on the production performance of sows and piglets. Pigs were randomly allocated into one of three treatments with five replicates per treatment. The dietary treatments were as follows: (i) CON (corn-soybean meal-based control); (ii) EZ1 (CON + 0.05% cellulase); and (iii) EZ2 (CON + 0.10% cellulase). The supplementation of cellulase had no effect (P > 0.05) on body weight and feed intake of lactating sows. At weaning, back fat thickness loss decreased (P = 0.04) linearly in EZ1 and EZ2 treatments. The average daily gain (ADG) of piglets increased (linear P = 0.06, quadratic P = 0.04)) during days 14 to 21 as well as at days 21 to 25 (linear P = 0.03 and quadratic P = 0.01) with the increase in the level of supplemented enzyme. Dry matter and nitrogen digestibility increased (linear P = 0.01) in lactating sows fed EZ1 and EZ2 diet compared with CON. In conclusion, it is suggested that cellulase supplementation to corn-soybean meal based diet exerts beneficial effects to sows in reducing their back fat thickness loss at weaning and also helps to improve nutrient digestibility. It also helped to improve the ADG of piglets. © 2015 Japanese Society of Animal Science.

  5. Growing ethanol sector drives corn supply chain shift for the last decade

    Science.gov (United States)

    Kim, T.; Schmitt, J.; Brauman, K. A.; Smith, T. M.; Suh, K.

    2017-12-01

    The US is the largest producer in the world, 89% of corn production uses in domestic demands in 2012. Carbon emission and irrigated water usage in the corn farming stage are hot-spot in the meat production sectors, comprise 37% of all US corn demand. The annual capacity of the ethanol sector increases from 6.5 billion gallons to 15.3 billion gallons for the last decade. The growth of corn demand in ethanol sector makes corn supply chain shift. Most of the ethanol plants located in the Mid-west where is the top 12 corn producing states. Therefore animal feeds take more supply from the other states. The purpose of this study is to estimate environmental impacts and water scarcity associated embedded corn by the temporal and spatial corn supply chain model based on a cost minimization. We use publicly available county-level data on corn production, feed demands, aggregative carbon emission and irrigated water usage in farming state, and a water depletion index as a metric for determining water scarcity. The water stressed counties produce 23.3% of US total corn production in 2012, and the irrigated corn is 14.2%. We simulated the corn supply chain using linear programming and developed the web-based visualization tools called FoodS3 (Food Systems Supply-chain Sustainability tool, http://foods3.org).

  6. Performance and techno-economic assessment of several solid-liquid separation technologies for processing dilute-acid pretreated corn stover.

    Science.gov (United States)

    Sievers, David A; Tao, Ling; Schell, Daniel J

    2014-09-01

    Solid-liquid separation of pretreated lignocellulosic biomass slurries is a critical unit operation employed in several different processes for production of fuels and chemicals. An effective separation process achieves good recovery of solute (sugars) and efficient dewatering of the biomass slurry. Dilute acid pretreated corn stover slurries were subjected to pressure and vacuum filtration and basket centrifugation to evaluate the technical and economic merits of these technologies. Experimental performance results were used to perform detailed process simulations and economic analysis using a 2000 tonne/day biorefinery model to determine differences between the various filtration methods and their process settings. The filtration processes were able to successfully separate pretreated slurries into liquor and solid fractions with estimated sugar recoveries of at least 95% using a cake washing process. A continuous vacuum belt filter produced the most favorable process economics. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Replication of Holograms with Corn Syrup by Rubbing

    Directory of Open Access Journals (Sweden)

    Arturo Olivares-Pérez

    2012-08-01

    Full Text Available Corn syrup films are used to replicate holograms in order to fabricate micro-structural patterns without the toxins commonly found in photosensitive salts and dyes. We use amplitude and relief masks with lithographic techniques and rubbing techniques in order to transfer holographic information to corn syrup material. Holographic diffraction patterns from holographic gratings and computer Fourier holograms fabricated with corn syrup are shown. We measured the diffraction efficiency parameter in order to characterize the film. The versatility of this material for storage information is promising. Holographic gratings achieved a diffraction efficiency of around 8.4% with an amplitude mask and 36% for a relief mask technique. Preliminary results using corn syrup as an emulsion for replicating holograms are also shown in this work.

  8. Replication of Holograms with Corn Syrup by Rubbing

    Science.gov (United States)

    Mejias-Brizuela, Nildia Y.; Olivares-Pérez, Arturo; Ortiz-Gutiérrez, Mauricio

    2012-01-01

    Corn syrup films are used to replicate holograms in order to fabricate micro-structural patterns without the toxins commonly found in photosensitive salts and dyes. We use amplitude and relief masks with lithographic techniques and rubbing techniques in order to transfer holographic information to corn syrup material. Holographic diffraction patterns from holographic gratings and computer Fourier holograms fabricated with corn syrup are shown. We measured the diffraction efficiency parameter in order to characterize the film. The versatility of this material for storage information is promising. Holographic gratings achieved a diffraction efficiency of around 8.4% with an amplitude mask and 36% for a relief mask technique. Preliminary results using corn syrup as an emulsion for replicating holograms are also shown in this work.

  9. Forecasting corn production in Serbia using ARIMA model

    Directory of Open Access Journals (Sweden)

    Ilić Ivana

    2016-01-01

    Full Text Available Agricultural crop production is closely related to climate, as a decisive success factor. Temperature fluctuations and changes in the volume of precipitation are the main factors affecting the growth and development of crops, and, ultimately, the quantity produced. Corn is the most common crop necessary to provide for domestic needs, and a strategic product for export. Production of corn in the period from 1947 to 2014 in Serbia had an oscillatory trend, with significant jumps and falls in production. The subject of this paper is the forecasting of future trends in corn production in Serbia. Building on the subject, the purpose of this paper is to create the model for forecasting future corn production and establishing its trends.

  10. 7 CFR 407.11 - Group risk plan for corn.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Group risk plan for corn. 407.11 Section 407.11..., DEPARTMENT OF AGRICULTURE GROUP RISK PLAN OF INSURANCE REGULATIONS § 407.11 Group risk plan for corn. The provisions of the Group Risk Plan for Corn for the 2000 and succeeding crop years are as follows: 1...

  11. Physicochemical and sensory qualities of spiced soy-corn milk ...

    African Journals Online (AJOL)

    Soy-corn milk type was produced from a blend of soybean milk and corn milk extract at a ratio of 3:1. The soy-corn milk type was spiced with ginger and garlic extract respectively to improve the taste. Total dissolved solid (TDS), total titrable acidity (TTA) specific gravity (SG), apparent colloidal stability, pH and sensory ...

  12. Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage.

    Science.gov (United States)

    El-Kady, Maher F; Ihns, Melanie; Li, Mengping; Hwang, Jee Youn; Mousavi, Mir F; Chaney, Lindsay; Lech, Andrew T; Kaner, Richard B

    2015-04-07

    Supercapacitors now play an important role in the progress of hybrid and electric vehicles, consumer electronics, and military and space applications. There is a growing demand in developing hybrid supercapacitor systems to overcome the energy density limitations of the current generation of carbon-based supercapacitors. Here, we demonstrate 3D high-performance hybrid supercapacitors and microsupercapacitors based on graphene and MnO2 by rationally designing the electrode microstructure and combining active materials with electrolytes that operate at high voltages. This results in hybrid electrodes with ultrahigh volumetric capacitance of over 1,100 F/cm(3). This corresponds to a specific capacitance of the constituent MnO2 of 1,145 F/g, which is close to the theoretical value of 1,380 F/g. The energy density of the full device varies between 22 and 42 Wh/l depending on the device configuration, which is superior to those of commercially available double-layer supercapacitors, pseudocapacitors, lithium-ion capacitors, and hybrid supercapacitors tested under the same conditions and is comparable to that of lead acid batteries. These hybrid supercapacitors use aqueous electrolytes and are assembled in air without the need for expensive "dry rooms" required for building today's supercapacitors. Furthermore, we demonstrate a simple technique for the fabrication of supercapacitor arrays for high-voltage applications. These arrays can be integrated with solar cells for efficient energy harvesting and storage systems.

  13. Performance of a thermal imager employing a hybrid pyroelectric detector array with MOSFET readout

    International Nuclear Information System (INIS)

    Watton, R.; Mansi, M.V.

    1988-01-01

    A thermal imager employing a two-dimensional hybrid array of pyroelectric detectors with MOSFET readout has been built. The design and theoretical performance of the detector are discussed, and the results of performance measurements are presented. 8 references

  14. The effects of corn silk on glycaemic metabolism

    OpenAIRE

    Han Linna; Liu Tongjun; Guo Jianyou; Liu Yongmei

    2009-01-01

    Abstract Background Corn silk contains proteins, vitamins, carbohydrates, Ca, K, Mg and Na salts, fixed and volatile oils, steroids such as sitosterol and stigmasterol, alkaloids, saponins, tannins, and flavonoids. Base on folk remedies, corn silk has been used as an oral antidiabetic agent in China for decades. However, the hypoglycemic activity of it has not yet been understood in terms of modern pharmacological concepts. The purpose of this study is to investigate the effects of corn silk ...

  15. Effect of replacing ground corn and soybean meal with licuri cake on the performance, digestibility, nitrogen metabolism and ingestive behavior in lactating dairy cows.

    Science.gov (United States)

    Ferreira, A C; Vieira, J F; Barbosa, A M; Silva, T M; Bezerra, L R; Nascimento, N G; de Freitas, J E; Jaeger, S M P L; Oliveira, P de A; Oliveira, R L

    2017-11-01

    Licuri (Syagrus coronate) cake is a biodiesel by-product used in ruminant feed as a beneficial energy source for supplementation in managed pastures. The objective was to evaluate the performance, digestibility, nitrogen balance, blood metabolites, ingestive behavior and diet profitability of eight crossbred Holstein (3/4)×Gyr (5/8) multiparous cows (480±25 kg BW and 100 days milking) grazing and supplemented with licuri cake partially replacing ground corn and soybean meal in concentrate (0, 200, 400 and 600 g/kg in dry matter (DM)), distributed in an experimental duplicated 4×4 Latin square design. Licuri cake partially replacing ground corn and soybean meal increased (Pdairy cows with average productions of 10 kg/day at levels up to 400 g/kg in the concentrate supplement because it provides an additional profit of US$0.07/animal per day and increased milk and Minas frescal cheese fat without negative effects on productive parameters.

  16. Stannous sulfide/multi-walled carbon nanotube hybrids as high-performance anode materials of lithium-ion batteries

    International Nuclear Information System (INIS)

    Li, Shuankui; Zuo, Shiyong; Wu, Zhiguo; Liu, Ying; Zhuo, Renfu; Feng, Juanjuan; Yan, De; Wang, Jun; Yan, Pengxun

    2014-01-01

    A hybrid of multi-walled carbon nanotubes (MWCNTs) anchored with SnS nanosheets is synthesized through a simple solvothermal method for the first time. Interestingly, SnS can be controllably deposited onto the MWCNTs backbone in the shape of nanosheets or nanoparticles to form two types of SnS/MWCNTs hybrids, SnS NSs/MWCNTs and SnS NPs/MWCNTs. When evaluated as an anode material for lithium-ion batteries, the hybrids exhibit higher lithium storage capacities and better cycling performance compared to pure SnS. It is found that the SnS NSs/MWCNTs hybrid exhibits a large reversible capacity of 620mAhg −1 at a current of 100mAg −1 as an anode material for lithium-ion batteries, which is better than SnS NPs/MWCNTs. The improved performance may be attributed to the ultrathin nanosheet subunits possess short distance for Li + ions diffusion and large electrode-electrolyte contact area for high Li + ions flux across the interface. It is believed that the structural design of electrodes demonstrated in this work will have important implications on the fabrication of high-performance electrode materials for lithium-ion batteries

  17. Influence of variety and harvest maturity on phytochemical content in corn silk.

    Science.gov (United States)

    Sarepoua, Eakrin; Tangwongchai, Ratchada; Suriharn, Bhalang; Lertrat, Kamol

    2015-02-15

    Corn silk has been used as a traditional herb in Asia. The objective of this study was to evaluate variability in phytochemicals in corn varieties at three maturity stages of corn silk. Ten vegetable corn varieties were evaluated in a completely randomized design with three replications. Data were recorded for total phenolic (TPC), total flavonoids (TFC), total anthocyanin (TAC) and antioxidant activity (AA) by DPPH free-radical-scavenging assays. Differences among corn varieties were observed for all parameters at all maturity stages, and the interactions between maturity stage and corn variety were significant. TPC and TAC were highest at the milky stage, whereas TFC and AA were highest at the silking stage. TPC, TFC and AA were highest in super sweet corn and white corn at the silking stage. PWC5 variety of purple waxy corn at the milky stage had the highest values for all parameters, and it is useful for further development of functional food products. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Evaluation of corn germ from ethanol production as an alternative fat source in dairy cow diets.

    Science.gov (United States)

    Abdelqader, M M; Hippen, A R; Kalscheur, K F; Schingoethe, D J; Karges, K; Gibson, M L

    2009-03-01

    Sixteen multiparous cows (12 Holstein and 4 Brown Swiss, 132 +/- 20 d in milk) were used in a replicated 4 x 4 Latin square design with 4-wk periods to determine the effects of feeding corn germ on dairy cow performance. Diets were formulated with increasing concentrations of corn germ (Dakota Germ, Poet Nutrition, Sioux Falls, SD) at 0, 7, 14, and 21% of the diet dry matter (DM). All diets had a 55:45 forage to concentrate ratio, where forage was 55% corn silage and 45% alfalfa hay. Dietary fat increased from 4.8% in the control diet to 8.2% at the greatest inclusion level of corn germ. The addition of corn germ resulted in a quadratic response in DM intake with numerically greater intake at 14% of diet DM. Feeding corn germ at 7 and 14% of diet DM increased milk yield and energy-corrected milk as well as fat percentage and yield. Milk protein yield tended to decrease as the concentration of corn germ increased in the diet. Dietary treatments had no effect on feed efficiency, which averaged 1.40 kg of energy-corrected milk/kg of DMI. Increasing the dietary concentration of corn germ resulted in a linear increase in milk fat concentrations of monounsaturated and polyunsaturated fatty acids at the expense of saturated fatty acids. Milk fat concentration and yield of cis-9, trans-11 and trans-10, cis-12 conjugated linoleic acid were increased with increased dietary concentrations of corn germ. Although milk fat concentrations of both total trans-18:1 and cis-18:1 fatty acids increased linearly, a marked numeric increase in the concentration of trans-10 C18:1 was observed in milk from cows fed the 21% corn germ diet. A similar response was observed in plasma concentration of trans-10 C18:1. Feeding increasing concentrations of corn germ had no effect on plasma concentrations of glucose, triglyceride, or beta-hydroxybutyrate; however, the concentration of nonesterified fatty acids increased linearly, with plasma cholesterol concentration demonstrating a similar trend

  19. Corn Stover Availability for Biomass Conversion: Situation Analysis

    International Nuclear Information System (INIS)

    Hess, J. Richard; Kenney, Kevin L.; Wright, Christopher T.; Perlack, Robert; Turhollow, Anthony

    2009-01-01

    As biorefining conversion technologies become commercial, feedstock availability, supply system logistics, and biomass material attributes are emerging as major barriers to the availability of corn stover for biorefining. While systems do exist to supply corn stover as feedstock to biorefining facilities, stover material attributes affecting physical deconstruction, such as densification and post-harvest material stability, challenge the cost-effectiveness of present-day feedstock logistics systems. In addition, the material characteristics of corn stover create barriers with any supply system design in terms of equipment capacity/efficiency, dry matter loss, and capital use efficiency. However, this study of a large, square-bale corn stover feedstock supply system concludes that (1) where other agronomic factors are not limiting, corn stover can be accessed and supplied to a biorefinery using existing bale-based technologies, (2) technologies and new supply system designs are necessary to overcome biomass bulk density and moisture material property challenges, and (3) major opportunities to improve conventional-bale biomass feedstock supply systems include improvements in equipment efficiency and capacity and reducing biomass losses in harvesting and collection and storage. Finally, the backbone of an effective stover supply system design is the optimization of intended and minimization of unintended material property changes as the corn stover passes through the individual supply system processes from the field to the biorefinery conversion processes

  20. Performance characteristics of hybrid MPI/OpenMP implementations of NAS parallel benchmarks SP and BT on large-scale multicore supercomputers

    KAUST Repository

    Wu, Xingfu; Taylor, Valerie

    2011-01-01

    The NAS Parallel Benchmarks (NPB) are well-known applications with the fixed algorithms for evaluating parallel systems and tools. Multicore supercomputers provide a natural programming paradigm for hybrid programs, whereby OpenMP can be used with the data sharing with the multicores that comprise a node and MPI can be used with the communication between nodes. In this paper, we use SP and BT benchmarks of MPI NPB 3.3 as a basis for a comparative approach to implement hybrid MPI/OpenMP versions of SP and BT. In particular, we can compare the performance of the hybrid SP and BT with the MPI counterparts on large-scale multicore supercomputers. Our performance results indicate that the hybrid SP outperforms the MPI SP by up to 20.76%, and the hybrid BT outperforms the MPI BT by up to 8.58% on up to 10,000 cores on BlueGene/P at Argonne National Laboratory and Jaguar (Cray XT4/5) at Oak Ridge National Laboratory. We also use performance tools and MPI trace libraries available on these supercomputers to further investigate the performance characteristics of the hybrid SP and BT.

  1. Performance characteristics of hybrid MPI/OpenMP implementations of NAS parallel benchmarks SP and BT on large-scale multicore supercomputers

    KAUST Repository

    Wu, Xingfu

    2011-03-29

    The NAS Parallel Benchmarks (NPB) are well-known applications with the fixed algorithms for evaluating parallel systems and tools. Multicore supercomputers provide a natural programming paradigm for hybrid programs, whereby OpenMP can be used with the data sharing with the multicores that comprise a node and MPI can be used with the communication between nodes. In this paper, we use SP and BT benchmarks of MPI NPB 3.3 as a basis for a comparative approach to implement hybrid MPI/OpenMP versions of SP and BT. In particular, we can compare the performance of the hybrid SP and BT with the MPI counterparts on large-scale multicore supercomputers. Our performance results indicate that the hybrid SP outperforms the MPI SP by up to 20.76%, and the hybrid BT outperforms the MPI BT by up to 8.58% on up to 10,000 cores on BlueGene/P at Argonne National Laboratory and Jaguar (Cray XT4/5) at Oak Ridge National Laboratory. We also use performance tools and MPI trace libraries available on these supercomputers to further investigate the performance characteristics of the hybrid SP and BT.

  2. Different proportions of C/KCu7S4 hybrid structure for high-performance supercapacitors

    Science.gov (United States)

    Dai, Shuge; Xi, Yi; Hu, Chenguo; Yue, Xule; Cheng, Lu; Wang, Guo

    2014-10-01

    KCu7S4 has the channel structure and minor resistance. Its double larger channels ensure that the ions can well exchange with other's, at the same time, can shorten the ionic diffusion path and improve the ionic and electronic transport. So KCu7S4 shows good electrochemical property. The paper reports a novel and high performance supercapacitor based on hybrid carbon particles and KCu7S4 (C/KCu7S4) electrode. For the hybrid structure with different proportions of C and KCu7S4, the C/KCu7S4 (1:10) hybrid supercapacitor shows preferable electrochemical performance and large specific capacitance (469 mF cm-2) at high charge-discharge rate (2 mA), still retaining ∼95% of the capacitance over 5000 cycles by charge-discharge process at a fixed current of 10 mA. Three supercapacitor units in series can light 50 light-emitting diodes (LEDs) for 2.5 min, 10 LEDs for 4 min, one LED for 5.5 min. The much-increased capacity, rate capability, and cycling stability may be attributed to the superionic conductive KCu7S4 nanowires and C/KCu7S4 hybrid structure, which improve ionic and electronic transport, enhance the kinetics of redox reactions through the electrode system.

  3. Fuel ethanol production from sugarcane and corn: Comparative analysis for a Colombian case

    International Nuclear Information System (INIS)

    Quintero, J.A.; Montoya, M.I.; Sanchez, O.J.; Giraldo, O.H.; Cardona, C.A.

    2008-01-01

    The Colombian government has defined the use of bioethanol as a gasoline enhancer to reduce greenhouse gases, gasoline imports, and to boost the rural economy. To meet the projected fuel ethanol demand needed to oxygenate the gasoline in the whole country, the construction of about five additional ethanol production plants is required. For this, a comparative analysis of the technological options using different feedstocks should be performed. In this work, a comparison of the economical and environmental performance of the ethanol production process from sugarcane and corn under Colombian conditions has been carried out. Net present value and total output rate of potential environmental impact were used as the economical and environmental indicators, respectively. Through the integration of these indicators into one index by using the analytical hierarchy process (AHP) approach, sugarcane ethanol process was determined as the best choice for Colombian ethanol production facilities. AHP scores obtained in this study for sugarcane and corn ethanol were 0.571 and 0.429, respectively. However, starchy crops like corn, cassava or potatoes used as feedstock for ethanol production could potentially cause a higher impact on the rural communities and boost their economies if social matters are considered

  4. Aflatoxin contamination in corn sold for wildlife feed in texas.

    Science.gov (United States)

    Dunham, Nicholas R; Peper, Steven T; Downing, Carson D; Kendall, Ronald J

    2017-05-01

    Supplemental feeding with corn to attract and manage deer is a common practice throughout Texas. Other species, including northern bobwhites (Colinus virginianus), are commonly seen feeding around supplemental deer feeders. In many cases, supplemental feeding continues year-round so feed supply stores always have supplemental corn in stock. Fluctuating weather and improper storage of corn can lead to and/or amplify aflatoxin contamination. Due to the recent decline of bobwhites throughout the Rolling Plains ecoregion of Texas, there has been interest in finding factors such as toxins that could be linked to their decline. In this study, we purchased and sampled supplemental corn from 19 locations throughout this ecoregion to determine if aflatoxin contamination was present in individual bags prior to being dispersed to wildlife. Of the 57 bags sampled, 33 bags (approximately 58%) contained aflatoxin with a bag range between 0.0-19.91 parts per billion (ppb). Additionally, three metal and three polypropylene supplemental feeders were each filled with 45.4 kg of triple cleaned corn and placed in an open field to study long-term aflatoxin buildup. Feeders were sampled every 3 months from November 2013-November 2014. Average concentration of aflatoxin over the year was 4.08 ± 2.53 ppb (±SE) in metal feeders, and 1.43 ± 0.89 ppb (±SE) in polypropylene feeders. The concentration of aflatoxins is not affected by the type of feeder (metal vs polypropylene), the season corn was sampled, and the location in the feeder (top, middle, bottom) where corn is sampled. It is unlikely that corn used in supplemental feeders is contributing to the bobwhite decline due to the low levels of aflatoxin found in purchased corn and long-term storage of corn used in supplemental feeders.

  5. Mild alkaline presoaking and organosolv pretreatment of corn stover and their impacts on corn stover composition, structure, and digestibility.

    Science.gov (United States)

    Qing, Qing; Zhou, Linlin; Guo, Qi; Gao, Xiaohang; Zhang, Yan; He, Yucai; Zhang, Yue

    2017-06-01

    An efficient strategy was developed in current work for biochemical conversion of carbohydrates of corn stover into monosaccharides. Corn stover was first presoaked in mild alkaline solution (1% Na 2 S) under 40°C for 4h, after which about 35.3% of the lignin was successfully removed while the specific surface area was notably enlarged. Then the presoaked solids were subjected to organosolv pretreatment that employed 20% methanol with an addition of 0.2% HCl as catalyst at 160°C for 20min, and the maximum total sugar yield of the pretreated corn stover achieved was 98.6%. The intact structure of corn stover was disrupted by this two-step process, which resulted in a porous but crystalline structure of the regenerated solids that were mainly composed of cellulose. The enlarged specific surface area and increased accessibility made the regenerated solids highly digestible by a moderate enzyme loading. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Avaliação de cinco híbridos de milho (Zea mays, L. em diferentes estádios de maturação: 1. Produtividade, características morfológicas e correlações Evaluation of five corn hybrids (Zea mays, L. at different maturity stages: 1. Productivity, morphologic traits and correlations

    Directory of Open Access Journals (Sweden)

    Juliano Ricardo Fontanini Beleze

    2003-06-01

    Full Text Available Este trabalho foi conduzido para se avaliarem produtividade e as características morfológicas de cinco híbridos de milho Pioneer: superprecoce P32R21, os precoces P30R07, P3041, P30F33 e o semiprecoce P30F80, em cinco estádios de maturação. O delineamento utilizado foi de blocos ao acaso, com cinco tratamentos e quatro repetições. A colheita das amostras dos híbridos de milho foi adotada estimando-se cinco estádios de maturidade da planta: 30, 34, 38, 42 e 46% de matéria seca. Por ocasião da colheita, no primeiro estádio de maturação, foram tomados alguns parâmetros para avaliação, como altura da planta, altura inserção de espiga, peso da planta, diâmetro de colmo e número médio de espigas. Para cada estádio de maturação, procedeu-se à separação de colmo + bainha, lâmina foliar, grão, sabugo e palha. Os híbridos superprecoce P32R21 e o precoce P3041 apresentaram maiores peso, diâmetro de colmo e altura de planta. As produções de matéria seca (MS, massa verde, grãos, lâmina foliar e colmo + bainha, expressas em toneladas/ha, diferiram entre os híbridos avaliados e houve efeito de dias pós-plantio (DPP. O aumento na produção de MS verificado com o avanço do estádio de maturidade dos híbridos foi correlacionado positivamente com o aumento da produção de grãos (R² = 64,3%. A produção de MS correlacionou-se positivamente com a percentagem de espiga (R² = 56,0% e negativamente (R² = -56,7% com a percentagem de colmo + bainha (em relação a planta inteira.This study was conducted to evaluate productivity and morphologic traits of five hybrids of Pioneer corn: P32R21, P30R07, P3041, P30F33 and P30F80 at different maturity stages. The treatments were used in plots of 7 x 8 m in a randomized block design, with four replicates. The samples collected, of corn hybrid, were adopted trying to estimate phases of maturity of the plant (30, 34, 38, 42 and 46% of dry matter [DM]. In the first maturation stage

  7. Comparison of extraction buffers for the detection of fumonisin B(1) in corn by immunoassay and high-performance liquid chromatography.

    Science.gov (United States)

    Kulisek, E S; Hazebroek, J P

    2000-01-01

    The Associatian of Official Analytical Chemists approved method for quantification of fumonisin B(1) (FB(1)) in corn meal or corn-based food products includes extraction into methanol (MeOH)/water (3:1, v/v). Disposal of the extraction medium can pose safety and environmental problems. To secure a rapid and inexpensive screen for FB(1) contamination, a sensitive competitive ELISA using a rabbit polyclonal antibody was developed. This assay was used in a comparative study measuring the extraction efficiency of FB(1) in aqueous or organic solvent buffers using 16 field corn samples. An aqueous phosphate buffer was found to be suitable for extracting FB(1), thus eliminating the need for organic solvents. HPLC and ELISA determinations compared well in fortified samples at known concentrations between 1 and 50 microg/mL of extract. Overestimation at levels >50 microg/mL were common. The characteristics and application of the ELISA for screening purposes are discussed.

  8. Comparison of corn and switchgrass on marginal soils for bioenergy

    Energy Technology Data Exchange (ETDEWEB)

    Varvel, G.E.; Vogel, K.P.; Mitchell, R.B. [USDA-ARS, 344 Keim Hall, University of Nebraska-Lincoln, P.O. Box 830937, Lincoln, NE 68583-0937 (United States); Follett, R.F. [USDA-ARS, Room S-100, 2150 Centre Avenue Building D, Ft. Collins, CO 80526-8119 (United States); Kimble, J.M. [USDA-NRCS, National Soil Survey Center, 100 Centennial Mall North, Lincoln, NE 68508-3866 (United States)

    2008-01-15

    Crop residues such as corn (Zea mays L.) stover are viewed as an abundant and inexpensive source of biomass that can be removed from fields to produce bioenergy. Assumptions include that with minimum or no-tillage farming methods, there will be no deleterious production or environmental effects. A long-term field study was established in eastern Nebraska, USA, to compare the switchgrass managed as a biomass energy crop versus no-till corn on a non-irrigated site, marginal for row-crop production, in the western Corn Belt. Our objective in this paper is to report on corn stover removal effects on corn grain yields and potential ethanol production in both cropping systems. Corn, under no-till management, and switchgrass were grown at three N fertilizer levels. In the first 5 years (2001-2005), removal of half the available stover significantly reduced corn yields. During that same time period, the potential ethanol yield for switchgrass was equal to or greater than the potential total ethanol yield of corn grain and harvested stover fertilized at the same optimum N rate. The effect of crop residue removal on crop productivity needs to be investigated in other agro-ecosystems and the potential use of dedicated perennial biomass energy crops should remain a viable renewable energy option on non-irrigated marginal croplands. (author)

  9. Nitrogen fertilization (15NH4NO3 of palisadegrass and residual effect on subsequent no-tillage corn

    Directory of Open Access Journals (Sweden)

    Emerson Borghi

    2014-10-01

    Full Text Available Nitrogen is required in large amounts by plants and their dinamics in corn and perennial forages intercropped is little known. This study analyzed the efficiency of nitrogen fertilization (15NH4NO3 applied after corn grain harvest to palisadegrass (Brachiaria brizantha cv. Marandu in intercrops sown at two times, as well as the N residual effect on the subsequent corn crop. The field experiment was performed in Botucatu, São Paulo State, in southeastern Brazil, on a structured Alfisol under no-tillage. The experiment was arranged in a randomized block design in a split plot scheme with four replications. The main plots consisted of two intercropping systems (corn and palisadegrass sown together and palisadegrass sown later, at corn top-dressing fertilization. The subplots consisted of four N rates (0, 30, 60, and 120 kg ha-1 N. The subplots contained microplots, in which enriched ammonium nitrate (15NH4NO3 was applied at the same rates. The time of intercrop sowing affected forage dry matter production, the amount of fertilizer-derived N in and the N use efficiency by the forage plants. Nitrogen applied in autumn to palisadegrass intercropped with corn, planted either at corn sowing or at N top-dressing fertilization, increased the forage yield up to a rate of 60 kg ha-1. The amount of fertilizer-derived N by the forage plants and the fertilizer use efficiency by palisadegrass were highest 160 days after fertilization for both intercrop sowing times, regardless of N rates. Residual N did not affect the N nutrition of corn plants grown in succession to palisadegrass, but increased grain yield at rates of 60 and 120 kg ha-1 N, when corn was grown on palisadegrass straw from the intercrop installed at corn fertilization (top-dressing. Our results indicated that the earlier intercropping allowed higher forage dry matter production. On the other hand, the later intercrop allowed a higher corn grain yield in succession to N-fertilized palisadegrass.

  10. Partial substitution of barley for corn: effect on "Hamra" lamb growth performance, carcass and meat characteristics.

    Science.gov (United States)

    Ziani, Kaddour; Khaled, Méghit Boumédiène

    2016-03-01

    The aim of this study was to investigate the effect of two kinds of given diets on growth, on some carcass characteristics and on the major meat nutrients of local Algerian sheep breed. The investigated sheep breed called "Hamra" is one of the most famous breeds in Algeria. Among one 106 animals, 40 lambs were selected according to their age, similar livestock characteristics and body weight. The samples were divided into two equal groups: control and experimental lambs according to their live weight; 24.63 ± 0.47 and 24.35 ± 0.64 kg, respectively. Both groups were fed with two varieties of concentrate diets: corn diet based for the first group of control lambs (n = 20) and corn substituted by barley (Variety Saïda 183) for the second experimental group lambs (n = 20). Both diets were supplemented with 200 g straw of barley/animal/ration. The chemical analysis of diets showed an elevated crude fibre content in the commercial concentrate. However, the experimental concentrate contained higher amounts of calcium. After 59 days of fattening, no significant difference was found among the two studied groups on the growth performance (p > 0.05), showing the same final body weight. In contrast, a significant difference was found (p ≤ 0.001) in relation to the cost of the given diet. This could affect the price of the produced meat. At 37.85 ± 0.78 kg live weight, 10 lambs fed with experimental concentrate were slaughtered. The dressing percentage was 46.65 %, with 2.49 % of carcass shrink. Furthermore, an interesting percentage of total muscle was obtained (63.73 %) with a good carcass conformation scoring 9.56. Compared to other breed sheep, Hamra carcass could be considered as the most valuable one economically.

  11. Corn silk induces nitric oxide synthase in murine macrophages.

    Science.gov (United States)

    Kim, Kyung A; Choi, Sang Kyu; Choi, Hye Seon

    2004-12-31

    Corn silk has been purified as an anticoagulant previously and the active component is a polysaccharide with a molecular mass of 135 kDa. It activates murine macrophages to induce nitric oxide synthase (NOS) and generate substantial amounts of NO in time and dose-dependent manners. It was detectable first at 15 h after stimulation by corn silk, peaked at 24 h, and undetectable by 48 h. Induction of NOS is inhibited by pyrolidine dithiocarbamate (PDTC) and genistein, an inhibitor of nuclear factor kappa B (NF-kappaB) and tyrosine kinase, respectively, indicating that iNOS stimulated by corn silk is associated with tyrosine kinase and NF-kappaB signaling pathways. IkappaB-alpha degradation was detectible at 10 min, and the level was restored at 120 min after treatment of corn silk. Corn silk induced nuclear translocation of NF-kappaB by phosphorylation and degradation of IkappaB-alpha.

  12. Energy performance analysis for a photovoltaic, diesel, battery hybrid power supply system

    CSIR Research Space (South Africa)

    Tazvinga, Henerica

    2010-03-01

    Full Text Available This paper looks at an energy performance analysis for a photovoltaic, diesel, and battery hybrid power supply system. The procedure starts by the identification of the hourly load requirements for a typical target consumer and the concept of load...

  13. High thermal performance lithium-ion battery pack including hybrid active–passive thermal management system for using in hybrid/electric vehicles

    International Nuclear Information System (INIS)

    Fathabadi, Hassan

    2014-01-01

    In this study, a novel Li-ion battery pack design including hybrid active–passive thermal management system is presented. The battery pack is suitable for using in hybrid/electric vehicles. Active part of the hybrid thermal management system uses distributed thin ducts, air flow and natural convection as cooling media while the passive part utilizes phase change material/expanded graphite composite (PCM/EG) as cooling/heating component to optimize the thermal performance of the proposed battery pack. High melting enthalpy of PCM/EG composite together with melting of PCM/EG composite at the temperature of 58.9 °C remains the temperature distribution of the battery units in the desired temperature range (below 60 °C). The temperature and voltage distributions in the proposed battery pack design consisting of battery units, distributed thin ducts and PCM/EG composite are calculated by numerical solving of the related partial differential equations. Simulation results obtained by writing M-files code in Matlab environment and plotting the numerical data are presented to validate the theoretical results. A comparison between the thermal and physical characteristics of the proposed battery pack and other latest works is presented that explicitly proves the battery pack performance. - Highlights: • Novel Li-ion battery pack including active and passive thermal management systems. • The battery pack has high thermal performance for ambient temperatures until 55 °C. • Uniform temperature and voltage distributions. • The maximum observed temperature in each battery unit is less than other works. • The maximum temperature dispersion in each battery is less than other works

  14. Thermally fabricated MoS{sub 2}-graphene hybrids as high performance anode in lithium ion battery

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, S.K., E-mail: sunil111954@yahoo.co.uk [Department of Chemistry, Indian Institute of Technology, Kharagpur, 721302 (India); Kartick, B. [Department of Chemistry, Indian Institute of Technology, Kharagpur, 721302 (India); Choudhury, S. [Department of Nanostructured Materials, Leibniz-Institut für Polymerforschung Dresden e.V. (IPF Dresden), Hohe Strasse 6, 01069, Dresden (Germany); Stamm, M. [Department of Nanostructured Materials, Leibniz-Institut für Polymerforschung Dresden e.V. (IPF Dresden), Hohe Strasse 6, 01069, Dresden (Germany); Technische Universität Dresden, Physical Chemistry of Polymer Materials, 01062, Dresden (Germany)

    2016-11-01

    MoS{sub 2}-reduced graphene oxide (MoS{sub 2}-rGO: where rGO = 0, 1, 3, 5, 7 and 10 wt%) hybrids have been fabricated using (NH{sub 4}){sub 2}MoS{sub 4} and graphite oxide as single source precursors of MoS{sub 2} and thermally exfoliated reduced graphene oxide respectively. These individual precursors were initially subjected to grinding for 30 min followed by heating at 1200 °C for 15 min and characterized. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM) confirmed co-dispersion of MoS{sub 2} on thermally exfoliated graphite oxide. Electrochemical studies of these hybrids as anode materials showed that MoS{sub 2}-rGO (7 wt%) exhibited superior reversible capacity, cycling stability, enhanced rate performance (780 mAhg{sup −1}) and rate capability (880 mAhg{sup −1}) over pristine MoS{sub 2} and other hybrids. - Highlights: • MoS{sub 2}-graphene hybrids are synthesized by high temperature from individual precursors. • These hybrids have been used as anode material in LIB. • MoS{sub 2}-graphene (7 wt%) exhibited superior reversible capacity and cycling stability. • It showed high rate performance (780 mA h g{sup −1}) and rate capability (880 mA h g{sup −1}). • Enhanced performance at lower graphene makes it most attractive anode material in LIB.

  15. Graphene/CuS/ZnO hybrid nanocomposites for high performance photocatalytic applications

    International Nuclear Information System (INIS)

    Varghese, Jini; Varghese, K.T.

    2015-01-01

    We herein report a novel, high performance ternary nanocomposite composed of Graphene doped with nano Copper Sulphide and Zinc Oxide nanotubes (GCZ) for photodegradation of organic pollutants. Investigations were made to estimate and compare the Methyl Orange dye (MO) degradation using GCZ, synthesized pristine Graphene (Gr) and Graphene–ZnO hybrid nanocomposite (GZ) under UV light irradiations. The synthesis of nanocomposites involves the simple ultra-sonication and mixing methods. The nanocomposites were characterized using transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Raman spectroscopy, UV–vis absorption spectroscopy and Brunauer–Emmett–Teller (BET) surface area method. The as synthesized GCZ shows better surface area, porosity and band gap energy than as synthesized Gr and GZ. The photocatalytic degradation of methyl orange dye follows as Gr  > GZ due to the stronger adsorbability, large number of photo induced electrons and highest inhibition of charge carrier's recombination of GCZ. The kinetic investigation demonstrates that dye degradation exhibit the pseudo first order kinetic model with rate constant 0.1322, 0.049 and0.0109 min"−"1 corresponding to GCZ, GZ and Gr. The mechanism of dye degradation in presence of photocatalyst is also discussed. This study confirms that GCZ is a more promising material for high performance catalytic applications especially in the dye waste water purification. - Highlights: • Graphene–CuS–ZnO hybrid composites show better surface area, porosity and adsorbability. • CuS–ZnO hybrid nanostructure highly enhanced the photocatalytic activity of Graphene. • Graphene–CuS–ZnO hybrid composites show superior photocatalytic efficiency, rate constant and quantum yield.

  16. Graphene/CuS/ZnO hybrid nanocomposites for high performance photocatalytic applications

    Energy Technology Data Exchange (ETDEWEB)

    Varghese, Jini, E-mail: jini.nano@gmail.com; Varghese, K.T., E-mail: ktvscs@gmail.com

    2015-11-01

    We herein report a novel, high performance ternary nanocomposite composed of Graphene doped with nano Copper Sulphide and Zinc Oxide nanotubes (GCZ) for photodegradation of organic pollutants. Investigations were made to estimate and compare the Methyl Orange dye (MO) degradation using GCZ, synthesized pristine Graphene (Gr) and Graphene–ZnO hybrid nanocomposite (GZ) under UV light irradiations. The synthesis of nanocomposites involves the simple ultra-sonication and mixing methods. The nanocomposites were characterized using transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Raman spectroscopy, UV–vis absorption spectroscopy and Brunauer–Emmett–Teller (BET) surface area method. The as synthesized GCZ shows better surface area, porosity and band gap energy than as synthesized Gr and GZ. The photocatalytic degradation of methyl orange dye follows as Gr <<< GCZ >> GZ due to the stronger adsorbability, large number of photo induced electrons and highest inhibition of charge carrier's recombination of GCZ. The kinetic investigation demonstrates that dye degradation exhibit the pseudo first order kinetic model with rate constant 0.1322, 0.049 and0.0109 min{sup −1} corresponding to GCZ, GZ and Gr. The mechanism of dye degradation in presence of photocatalyst is also discussed. This study confirms that GCZ is a more promising material for high performance catalytic applications especially in the dye waste water purification. - Highlights: • Graphene–CuS–ZnO hybrid composites show better surface area, porosity and adsorbability. • CuS–ZnO hybrid nanostructure highly enhanced the photocatalytic activity of Graphene. • Graphene–CuS–ZnO hybrid composites show superior photocatalytic efficiency, rate constant and quantum yield.

  17. Agricultural production and nutrient runoff in the Corn Belt ...

    Science.gov (United States)

    Agricultural production in the Corn Belt region of the Upper Mississippi River Basin (UMRB) remains a leading source of nitrogen runoff that contributes to the annual hypoxic 'Dead Zone' in the Gulf of Mexico. The rise of corn production, land conversion, and fertilizer use in response to ethanol policy incentives in recent years is well documented and may worsen this effect. We develop a spatially distributed dynamic environmental performance index (EPI), accounting for both desirable agricultural outputs and undesirable nonpoint source emissions from farm production, to examine the corresponding changes in environmental performance within the UMRB between 2002 and 2007, which is characterized by increasing policy incentives for ethanol production. County-level production data from the USDA agricultural census are aggregated to hydrologic unit code (HUC8) boundaries using a geographic information system (GIS), and a previously developed statistical model, which includes net anthropogenic nitrogen inputs (NANI) as well as precipitation and land use characteristics as inputs, is used to estimate annual nitrogen loadings delivered to streams from HUC8 watersheds. The EPI allows us to decompose performance of each HUC8 region over time into changes in productive efficiency and emissions efficiency. To our knowledge, this is the first study to examine the corresponding changes in environmental performance for producers in this region at the watershed scale. The resu

  18. Evaluation of limit feeding corn and distillers dried grains with solubles in non-feed-withdrawal molt programs for laying hens.

    Science.gov (United States)

    Mejia, L; Meyer, E T; Utterback, P L; Utterback, C W; Parsons, C M; Koelkebeck, K W

    2010-03-01

    An experiment was conducted using 504 Hy-Line W-36 Single Comb White Leghorn hens (69 wk of age) randomly assigned to 1 of 7 treatments. These treatments consisted of a 47% corn:47% soy hulls diet (C:SH) fed ad libitum; a 94% corn diet fed at a rate of 36.3, 45.4, or 54.5 g/hen per day (CORN 36, CORN 45, and CORN 54, respectively); and a 94% corn distillers dried grains with solubles (DDGS) diet fed at the same rates as the previous corn diets (DDGS 36, DDGS 45, and DDGS 54, respectively) during the molt period of 28 d. The intent was to feed the DDGS diets for 28 d; however, all hens on these diets had very low feed intakes and greater than anticipated BW loss. Thus, they were switched to a 16% CP corn-soybean meal layer diet on d 19 of the molt period. At d 28, hens on all treatments were fed the same corn-soybean meal layer diet for 39 wk (73 to 112 wk of age). All DDGS diets and the CORN 36 diet resulted in total cessation of egg production during the molt period and egg production of hens fed the CORN 45, CORN 54, and C:SH diets had decreased to 3 and 4%, respectively, by d 28. Body weight loss during the 28-d molt period ranged from 14% for the CORN 54 diet to approximately 23% for the 3 DDGS diets. Postmolt egg production (5 to 43 wk) was higher for hens fed the DDGS molt diets than those fed the corn diets. There were no consistent differences in egg mass, egg-specific gravity, feed efficiency, or layer feed consumption among molt treatments for the postmolt period. These results indicate that limit feeding corn diet and DDGS diet in non-feed-withdrawal molt programs will yield long-term postmolt performance that is comparable to that observed by ad libitum feeding a C:SH diet.

  19. The improvement of corn starch isolation process by gamma irradiation

    International Nuclear Information System (INIS)

    Byun, M.W.; Kang, I.J.; Kwon, J.H.; Lee, S.J.; Kim, S.K.

    1995-01-01

    Gamma irradiation was applied to non-glutinous and glutinous corns for improving starch isolation process. No significant changes in proximate composition of corn grains were observed by gamma irradiation. Irradiation at 1 and 5 kGy was effective for sterilizing all contaminated microorganisms of non-glutinous and glutinous corns, respectively. The moisture-uptake rate constants were increased in proportional to the steeping temperature and applied irradiation dose level. The irradiation efficacy on water absorption properties was also recognized in the corns stored for six months at room temperature. The combined use of gamma irradiation with sulfur dioxide solution was very effective for reducing steeping time. The starch yield gradually increased as irradiation dose levels increased. At 2 kGy, the sarch yield of non-glutinous and glutinous corns increased by 38% and 27%, respectively. No significant difference in Hunter's color value was observed between the starches isolated from nonirradiated and irradiated corn grains

  20. Hybridized Phosphate with Ultrathin Nanoslices and Single Crystal Microplatelets for High Performance Supercapacitors

    Science.gov (United States)

    Zhao, Yufeng; Chen, Zhaoyang; Xiong, Ding-Bang; Qiao, Yuqing; Tang, Yongfu; Gao, Faming

    2016-01-01

    A novel hybridized phosphate is developed through a mild hydrothermal method to construct high performance asymmetric supercapacitor. Single layered (Ni,Co)3(PO4)2·8H2O nanoslices (∼1 nm) and single crystal (NH4)(Ni,Co)PO4·0.67H2O microplatelets are obtained through a template sacrificial method and dissolution recrystallization approach respectively in one step. This unique hybridized structure delivers a maximum specific capacitance of 1128 F g−1 at current density of 0.5 A g−1. The asymmetric supercapacitor (ASC) based on the hybrid exhibits a high energy density of 35.3 Wh kg−1 at low power density, and still holds 30.9 Wh kg−1 at 4400 W kg−1. Significantly, the ASC manifests very high cycling stability with 95.6% capacitance retention after 5000 cycles. Such excellent electrochemical performance could be attributed to the synergistic effect of the surface redox reaction from the ultrathin nanoslices and ion intercalation from the single crystal bulk structure. This material represents a novel kind of electrode material for the potential application in supercapacitors. PMID:26833204