WorldWideScience

Sample records for hybrid articulated buses

  1. Transit experience with hydrogen fueled hybrid electric buses

    International Nuclear Information System (INIS)

    Scott, P.B.; Mazaika, D.M.; Levin, J.; Edwards, T.

    2006-01-01

    Both AC Transit and SunLine Transit operate hybrid electric hydrogen fueled buses in their transit service. ACT presently operates three fuel cell buses in daily revenue service, and SunLine operates a fuel cell bus and a HHICE (Hybrid Hydrogen Internal Combustion Engine) bus. All these buses use similar electric drive train and electric accessories, although the detailed design differs notably between the fuel cell and the hybrid ICE buses. The fuel cell buses use a 120kW UTC fuel cell and a Van Hool Chassis, whereas the HHICE bus uses a turbocharged Ford engine which is capable of 140kW generator output in a New Flyer Chassis. The HHICE bus was the first in service, and has been subjected to both winter testing in Manitoba, Canada and summer testing in the Palm Springs, CA region. The winter testing included passenger sampling using questionnaires to ascertain passenger response. The fuel cell buses were introduced to service at the start of 2006. All five buses are in daily revenue service use. The paper will describe the buses and the experience of the transit properties in operating the buses. (author)

  2. Transit experience with hydrogen fueled hybrid electric buses

    Energy Technology Data Exchange (ETDEWEB)

    Scott, P.B.; Mazaika, D.M. [ISE Corp., Poway, CA (United States)

    2006-07-01

    Mass transit buses are ideal candidates for hydrogen implementation due to their capability of carrying 30 to 60 kg of hydrogen. ISE Corporation is a supplier of hydrogen fueled buses, including the first hybrid electric fuel cell bus which was commercialized in 2002, the hybrid electric fuel cell bus, and the hybrid hydrogen internal combustion engine (HHICE) bus which was commercialized in 2004. The configuration of a HHICE bus was illustrated with reference to its engine, control system, energy storage, generator, drive motor, inverter and accessories. Although these vehicles are expensive, the cost is amortized over a large base of hours used and passengers carried. The buses are operated primarily in urban areas where quiet and clean operation is needed the most. ISE has established a joint venture with Thor industries to develop a series of fuel cell buses equipped with a 60 kW PEM fuel cell. A schematic illustrating the energy flow in HHICE bus was also presented. It was shown that regenerative braking recovers the energy of motion. When using regenerative braking, most of the braking energy is saved in the battery. ISE drive systems convert 30 per cent or more of the bus energy to electrical energy to be used in later acceleration. Reduced fuel consumption also reduces the vehicle emissions. Testing of HHICE buses in both summer and winter operating conditions have shown that the range needs to be improved along with engine component reliability and durability. Fuel supply is also a major issue. A comparison with a fuel cell hybrid system was also presented. In the United States, more than 100,000 miles have been logged for the use of hydrogen hybrid buses, fuel cell buses and HHICE buses. The HHICE bus offers low capital cost, familiar technologies, but some NOx. CAT absorber technology offers the possibility of near zero emission capability. The fuel cell bus was found to be more fuel efficient, and can travel nearly twice as far per unit energy as

  3. High Energy Batteries for Hybrid Buses

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Lu

    2010-12-31

    EnerDel batteries have already been employed successfully for electric vehicle (EV) applications. Compared to EV applications, hybrid electric vehicle (HEV) bus applications may be less stressful, but are still quite demanding, especially compared to battery applications for consumer products. This program evaluated EnerDel cell and pack system technologies with three different chemistries using real world HEV-Bus drive cycles recorded in three markets covering cold, hot, and mild climates. Cells were designed, developed, and fabricated using each of the following three chemistries: (1) Lithium nickel manganese cobalt oxide (NMC) - hard carbon (HC); (2) Lithium manganese oxide (LMO) - HC; and (3) LMO - lithium titanium oxide (LTO) cells. For each cell chemistry, battery pack systems integrated with an EnerDel battery management system (BMS) were successfully constructed with the following features: real time current monitoring, cell and pack voltage monitoring, cell and pack temperature monitoring, pack state of charge (SOC) reporting, cell balancing, and over voltage protection. These features are all necessary functions for real-world HEV-Bus applications. Drive cycle test data was collected for each of the three cell chemistries using real world drive profiles under hot, mild, and cold climate conditions representing cities like Houston, Seattle, and Minneapolis, respectively. We successfully tested the battery packs using real-world HEV-Bus drive profiles under these various climate conditions. The NMC-HC and LMO-HC based packs successfully completed the drive cycles, while the LMO-LTO based pack did not finish the preliminary testing for the drive cycles. It was concluded that the LMO-HC chemistry is optimal for the hot or mild climates, while the NMC-HC chemistry is optimal for the cold climate. In summary, the objectives were successfully accomplished at the conclusion of the project. This program provided technical data to DOE and the public for assessing

  4. Feasibility study on the introduction of hybrid buses; Hybrid bus donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The purpose of this research is to design pilot projects for introducing hybrid buses into the public transportation sector. This research also covers contents regarding hybrid buses with a trolley-collector motor and a diesel engine, to identify technical and economical problems and to analyze cost beneficiation using hybrid buses. The trolley parallel hybrid system has been employed for the feasibility study. This system has abundant operation results in Europe and the USA. Its battery is small or is not necessary, and the maintenance cost is also low. As a result of the feasibility study, reduction effects of CO2 emission were found out. When the CO2 generation at the power plant is not counted, the reduction effect was estimated to be 32% compared with the CO2 emission from diesel buses. When the CO2 generation at the power plant is considered, it was estimated to be 18%. The cost beneficiation was investigated for the cases of the transportations using trolley system surrounding a medium-scale terminal among large-scale housing development, tourist resort, and stations. The annual income is estimated to be larger than the annual payment in each case. It was found that the hybrid bus is economically established. 17 refs., 48 figs., 41 tabs.

  5. Lifecycle cost assessment and carbon dioxide emissions of diesel, natural gas, hybrid electric, fuel cell hybrid and electric transit buses

    International Nuclear Information System (INIS)

    Lajunen, Antti; Lipman, Timothy

    2016-01-01

    This paper evaluates the lifecycle costs and carbon dioxide emissions of different types of city buses. The simulation models of the different powertrains were developed in the Autonomie vehicle simulation software. The carbon dioxide emissions were calculated both for the bus operation and for the fuel and energy pathways from well to tank. Two different operating environment case scenarios were used for the primary energy sources, which were Finland and California (USA). The fuel and energy pathways were selected appropriately in relation to the operating environment. The lifecycle costs take into account the purchase, operating, maintenance, and possible carbon emission costs. Based on the simulation results, the energy efficiency of city buses can be significantly improved by the alternative powertrain technologies. Hybrid buses have moderately lower carbon dioxide emissions during the service life than diesel buses whereas fully-electric buses have potential to significantly reduce carbon dioxide emissions, by up to 75%. The lifecycle cost analysis indicates that diesel hybrid buses are already competitive with diesel and natural gas buses. The high costs of fuel cell and battery systems are the major challenges for the fuel cell hybrid buses in order to reduce lifecycle costs to more competitive levels. - Highlights: • Alternative powertrains can significantly improve energy efficiency of transit buses. • Operating environment has an important impact on the lifecycle costs of buses. • Diesel hybrid buses are already cost effective solution for public transportation. • The cost of fuel cell technology is the major challenge for fuel cell hybrid buses. • Fully-electric buses have potential to significantly reduce carbon dioxide emissions.

  6. In-use fuel economy of hybrid-electric school buses in Iowa.

    Science.gov (United States)

    Hallmark, Shauna; Sperry, Bob; Mudgal, Abhisek

    2011-05-01

    Although it is much safer and more fuel-efficient to transport children to school in buses than in private vehicles, school buses in the United States still consume 822 million gal of diesel fuel annually, and school transportation costs can account for a significant portion of resource-constrained school district budgets. Additionally, children in diesel-powered school buses may be exposed to higher levels of particulates and other pollutants than children in cars. One solution to emission and fuel concerns is use of hybrid-electric school buses, which have the potential to reduce emissions and overall lifecycle costs compared with conventional diesel buses. Hybrid-electric technologies are available in the passenger vehicle market as well as the transit bus market and have a track record indicating fuel economy and emissions benefits. This paper summarizes the results of an in-use fuel economy evaluation for two plug-in hybrid school buses deployed in two different school districts in Iowa. Each school district selected a control bus with a route similar to that of the hybrid bus. Odometer readings, fuel consumption, and maintenance needs were recorded for each bus. The buses were deployed in 2008 and data were collected through May 2010. Fuel consumption was calculated for each school district. In Nevada, IA, the overall average fuel economy was 8.23 mpg for the hybrid and 6.35 mpg for the control bus. In Sigourney, IA, the overall average fuel economy was 8.94 mpg for the hybrid and 6.42 mpg for the control bus. The fuel consumption data were compared for the hybrid and control buses using a Wilcoxon signed rank test. Results indicate that fuel economy for the Nevada hybrid bus was 29.6% better than for the Nevada control bus, and fuel economy for the Sigourney hybrid bus was 39.2% higher than for the Sigourney control bus. Both differences were statistically significant.

  7. Comparative study of fuel cell, battery and hybrid buses for renewable energy constrained areas

    Science.gov (United States)

    Stempien, J. P.; Chan, S. H.

    2017-02-01

    Fuel cell- and battery-based public bus technologies are reviewed and compared for application in tropical urban areas. This paper scrutinizes the reported literature on fuel cell bus, fuel cell electric bus, battery electric bus, hybrid electric bus, internal combustion diesel bus and compressed natural gas bus. The comparison includes the capital and operating costs, fuel consumption and fuel cycle emissions. To the best of authors knowledge, this is the first study to holistically compare hydrogen and battery powered buses, which is the original contribution of this paper. Moreover, this is the first study to focus on supplying hydrogen and electricity from fossil resources, while including the associated emissions. The study shows that compressed natural gas and hybrid electric buses appear to be the cheapest options in terms of total cost of ownership, but they are unable to meet the EURO VI emissions' standard requirement. Only fuel cell based buses have the potential to achieve the emissions' standard when the fuel cycle based on fossil energy was considered. Fuel cell electric buses are identified as a technology allowing for the largest CO2 emission reduction, making ∼61% decrease in annual emissions possible.

  8. The Fuel Economy of Hybrid Buses: The Role of Ancillaries in Real Urban Driving

    Directory of Open Access Journals (Sweden)

    Francesco Bottiglione

    2014-07-01

    Full Text Available In the present context of the global economic crisis and environmental emergency, transport science is asked to find innovative solutions to turn traditional vehicles into fuel-saving and eco-friendly devices. In the last few years, hybrid vehicles have been shown to have potential benefits in this sense. In this paper, the fuel economy of series hybrid-electric and hybrid-mechanical buses is simulated in two real driving situations: cold and hot weather driving in the city of Taranto, in Southern Italy. The numerical analysis is carried out by an inverse dynamic approach, where the bus speed is given as a velocity pattern measured in the field tests performed on one of the city bus routes. The city of Taranto drive schedule is simulated in a typical tempered climate condition and with a hot temperature, when the air conditioning system must be switched on for passenger comfort. The fuel consumptions of hybrid-electric and hybrid-mechanical buses are compared to each other and with a traditional bus powered by a diesel engine. It is shown that the series hybrid-electric vehicle outperforms both the traditional and the mechanical hybrid vehicles in the cold weather driving simulation, reducing the fuel consumption by about 35% with respect to the traditional diesel bus. However, it is also shown that the performance of the hybrid-electric bus gets dramatically worse when the air-cooling system is continuously turned on. In this situation, the fuel consumption of the three different technologies for city buses under investigation is comparable.

  9. Towards sustainable urban transportation: Test, demonstration and development of fuel cell and hybrid-electric buses

    International Nuclear Information System (INIS)

    Folkesson, Anders

    2008-05-01

    Several aspects make today's transport system non-sustainable: - Production, transport and combustion of fossil fuels lead to global and local environmental problems. - Oil dependency in the transport sector may lead to economical and political instability. - Air pollution, noise, congestion and land-use may jeopardise public health and quality of life, especially in urban areas. In a sustainable urban transport system most trips are made with public transport because high convenience and comfort makes travelling with public transport attractive. In terms of emissions, including noise, the vehicles are environmentally sustainable, locally as well as globally. Vehicles are energy-efficient and the primary energy stems from renewable sources. Costs are reasonable for all involved, from passengers, bus operators and transport authorities to vehicle manufacturers. The system is thus commercially viable on its own merits. This thesis presents the results from three projects involving different concept buses, all with different powertrains. The first two projects included technical evaluations, including tests, of two different fuel cell buses. The third project focussed on development of a series hybrid-bus with internal combustion engine intended for production around 2010. The research on the fuel cell buses included evaluations of the energy efficiency improvement potential using energy mapping and vehicle simulations. Attitudes to hydrogen fuel cell buses among passengers, bus drivers and bus operators were investigated. Safety aspects of hydrogen as a vehicle fuel were analysed and the use of hydrogen compared to electrical energy storage were also investigated. One main conclusion is that a city bus should be considered as one energy system, because auxiliaries contribute largely to the energy use. Focussing only on the powertrain is not sufficient. The importance of mitigating losses far down an energy conversion chain is emphasised. The Scania hybrid fuel cell

  10. Hybrid markerless tracking of complex articulated motion in golf swings.

    Science.gov (United States)

    Fung, Sim Kwoh; Sundaraj, Kenneth; Ahamed, Nizam Uddin; Kiang, Lam Chee; Nadarajah, Sivadev; Sahayadhas, Arun; Ali, Md Asraf; Islam, Md Anamul; Palaniappan, Rajkumar

    2014-04-01

    Sports video tracking is a research topic that has attained increasing attention due to its high commercial potential. A number of sports, including tennis, soccer, gymnastics, running, golf, badminton and cricket have been utilised to display the novel ideas in sports motion tracking. The main challenge associated with this research concerns the extraction of a highly complex articulated motion from a video scene. Our research focuses on the development of a markerless human motion tracking system that tracks the major body parts of an athlete straight from a sports broadcast video. We proposed a hybrid tracking method, which consists of a combination of three algorithms (pyramidal Lucas-Kanade optical flow (LK), normalised correlation-based template matching and background subtraction), to track the golfer's head, body, hands, shoulders, knees and feet during a full swing. We then match, track and map the results onto a 2D articulated human stick model to represent the pose of the golfer over time. Our work was tested using two video broadcasts of a golfer, and we obtained satisfactory results. The current outcomes of this research can play an important role in enhancing the performance of a golfer, provide vital information to sports medicine practitioners by providing technically sound guidance on movements and should assist to diminish the risk of golfing injuries. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Simulations of the Fuel Economy and Emissions of Hybrid Transit Buses over Planned Local Routes

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Zhiming [ORNL; LaClair, Tim J [ORNL; Daw, C Stuart [ORNL; Smith, David E [ORNL; Franzese, Oscar [ORNL

    2014-01-01

    We present simulated fuel economy and emissions city transit buses powered by conventional diesel engines and diesel-hybrid electric powertrains of varying size. Six representative city drive cycles were included in the study. In addition, we included previously published aftertreatment device models for control of CO, HC, NOx, and particulate matter (PM) emissions. Our results reveal that bus hybridization can significantly enhance fuel economy by reducing engine idling time, reducing demands for accessory loads, exploiting regenerative braking, and shifting engine operation to speeds and loads with higher fuel efficiency. Increased hybridization also tends to monotonically reduce engine-out emissions, but trends in the tailpipe (post-aftertreatment) emissions involve more complex interactions that significantly depend on motor size and drive cycle details.

  12. Development of CH{sub 3}OH fueled PEMFC power plants for hybrid transit buses

    Energy Technology Data Exchange (ETDEWEB)

    Baumert, R; Cooper, R; Feasey, G [DBB Fuel Cell Engines Corp., Poway, CA (United States)

    1999-12-31

    An overview of the methanol fuel cell power system was provided, identifying improved efficiency and reduced emissions as the principal advantages. Four critical tasks regarding on-board fuel processing were described: (1) efficient methanol conversion (steam reforming), (2) effective reformate purification (selective catalytic oxidation), (3) optimized heat integration, and (4) rapid response to transients. A description of a 100 kW PEM fuel cell bus engine package was also presented. As far as a development time table is concerned, the DBB Fuel Cell Engines Corp. of Poway California has completed two methanol fueled PEMFC power plants, fabrication of the initial 100 kW PEMFC engine is in progress and scheduled for delivery by 1998. The two methanol fueled commercial products which are in the planning stages are the 100 and 200 kW class FCPS for hybrid and non-hybrid buses and other applications. tabs., figs.

  13. Driving-behavior-aware stochastic model predictive control for plug-in hybrid electric buses

    International Nuclear Information System (INIS)

    Li, Liang; You, Sixiong; Yang, Chao; Yan, Bingjie; Song, Jian; Chen, Zheng

    2016-01-01

    Highlights: • The novel approximated global optimal energy management strategy has been proposed for hybrid powertrains. • Eight typical driving behaviors have been classified with K-means to deal with the multiplicative traffic conditions. • The stochastic driver models of different driving behaviors were established based on the Markov chains. • ECMS was used to modify the SMPC-based energy management strategy to improve its fuel economy. • The approximated global optimal energy management strategy for plug-in hybrid electric buses has been verified and analyzed. - Abstract: Driving cycles of a city bus is statistically characterized by some repetitive features, which makes the predictive energy management strategy very desirable to obtain approximate optimal fuel economy of a plug-in hybrid electric bus. But dealing with the complicated traffic conditions and finding an approximated global optimal strategy which is applicable to the plug-in hybrid electric bus still remains a challenging technique. To solve this problem, a novel driving-behavior-aware modified stochastic model predictive control method is proposed for the plug-in hybrid electric bus. Firstly, the K-means is employed to classify driving behaviors, and the driver models based on Markov chains is obtained under different kinds of driving behaviors. While the obtained driver behaviors are regarded as stochastic disturbance inputs, the local minimum fuel consumption might be obtained with a traditional stochastic model predictive control at each step, taking tracking the reference battery state of charge trajectory into consideration in the finite predictive horizons. However, this technique is still accompanied by some working points with reduced/worsened fuel economy. Thus, the stochastic model predictive control is modified with the equivalent consumption minimization strategy to eliminate these undesirable working points. The results in real-world city bus routines show that the

  14. Cost Effectiveness Analysis of Quasi-In-Motion Wireless Power Transfer for Plug-In Hybrid Electric Transit Buses from Fleet Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Lijuan; Gonder, Jeff; Brooker, Aaron; Meintz, Andrew; Konan, Arnaud; Markel, Tony

    2016-05-16

    This study evaluated the costs and benefits associated with the use of stationary-wireless-power-transfer-enabled plug-in hybrid electric buses and determined the cost effectiveness relative to conventional buses and hybrid electric buses. A factorial design was performed over a number of different battery sizes, charging power levels, and f bus stop charging stations. The net present costs were calculated for each vehicle design and provided the basis for design evaluation. In all cases, given the assumed economic conditions, the conventional bus achieved the lowest net present cost while the optimal plug-in hybrid electric bus scenario beat out the hybrid electric comparison scenario. The parameter sensitivity was also investigated under favorable and unfavorable market penetration assumptions.

  15. The effects of urban driving conditions on the operating characteristics of conventional and hybrid electric city buses

    International Nuclear Information System (INIS)

    Soylu, Seref

    2014-01-01

    Highlights: • Operating characteristics of conventional and hybrid electric buses were examined. • Recovery of braking energy offers an excellent opportunity to improve fuel economy. • Speed and altitude profiles of routes have dramatic impacts on the energy recovery. • Capacity of the auxiliary power source has a dramatic impact on the energy recovery. • Round-trip efficiency of the regenerative braking system was calculated to be 27%. - Abstract: The basic operating characteristics of a conventional bus (CB) and a hybrid electric bus (HEB) were examined under urban driving conditions. To perform this examination, real-time operating data from the buses were collected on the Campus-Return route of the Sakarya Municipality. The main characteristics examined were the traction, braking, engine, engine generator unit (EGU), motor/generator (M/G), and ultracapacitor (Ucap) energies and efficiencies of the buses. The route elevation profile and the frequency of stop-and-go operations of the buses were found to have dramatic impacts on the braking and traction energies of the buses. The declining profile of the Campus-Return route provided an excellent opportunity for energy recovery by the regenerative braking system of the HEB. However, owing to the limits on the capacities and efficiencies of the hybrid drive train components and the Ucap, the bus braking energies were not recovered completely. Braking energies as high as 2.2 kW h per micro-trip were observed, but less than 1 kW h of braking energy per micro-trip was converted to electricity by the M/G; the rest of the braking energy was wasted in frictional braking. The maximum energy recovered and stored in the Ucap per micro-trip was 0.5 kW h, but the amount of energy recovered and stored per micro-trip was typically less than 0.2 kW h for the entire route. The cumulative braking energy recovered and stored in the Ucap for the Campus-Return route was 52% of the available brake energy, which was 13.02 kW h

  16. Factors influencing the control strategy of hybrid drive of urban public transport buses

    International Nuclear Information System (INIS)

    Barta, Dalibor; Mruzek, Martin

    2015-01-01

    The efficiency of each drives is dependent on many factors. Hybrid drives and specially the drives of urban public transport may be affected by other factors given by transport infrastructure or operational conditions. These factors condition the suitable configuration of the individual elements of hybrid drive and the establishment of good control strategy of such drive. The study of influencing factors of the control strategy is the aim of this paper. (full text)

  17. Approach to Hybrid Energy Storage Systems Dimensioning for Urban Electric Buses Regarding Efficiency and Battery Aging

    Directory of Open Access Journals (Sweden)

    Jorge Nájera

    2017-10-01

    Full Text Available This paper focuses on Hybrid Energy Storage Systems (HESS, consisting of a combination of batteries and Electric Double Layer Capacitors (EDLC, for electric urban busses. The aim of the paper is to develop a methodology to determine the hybridization percentage that allows the electric bus to work with the highest efficiency while reducing battery aging, depending on the chosen topology, control strategy, and driving cycle. Three power electronic topologies are qualitatively analyzed based on different criteria, with the topology selected as the favorite being analyzed in detail. The whole system under study is comprised of the following elements: a battery pack (LiFePO4 batteries, an EDLC pack, up to two DC-DC converters (depending on the topology, and an equivalent load, which behaves as an electric bus drive (including motion resistances and inertia. Mathematical models for the battery, EDLCs, DC-DC converter, and the vehicle itself are developed for this analysis. The methodology presented in this work, as the main scientific contribution, considers performance variation (energy efficiency and battery aging and hybridization percentage (ratio between batteries and EDLCs, defined in terms of mass, using a power load profile based on standard driving cycles. The results state that there is a hybridization percentage that increases energy efficiency and reduces battery aging, maximizing the economic benefits of the vehicle, for every combination of topology, type of storage device, control strategy, and driving cycle.

  18. Data Collection, Testing, and Analysis of Hybrid Electric Trucks and Buses Operating in California Fleets. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Matthew [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Duran, Adam [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ragatz, Adam [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cosgrove, Jon [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sindler, Petr [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Russell, Robert [Univ. of California, Riverside, CA (United States); Johnson, Kent [Univ. of California, Riverside, CA (United States)

    2015-06-12

    The objective of this project was to evaluate and quantify the emission impacts of commercially available hybrid medium- and heavy-duty vehicles relative to their non-hybrid counterparts. This effort will allow the California Air Resources Board (CARB) and other agencies to more effectively encourage development and commercial deployment of the most efficient, lowest emitting hybrid technologies needed to meet air quality and climate goals.

  19. Cost Effectiveness Analysis of Quasi-Static Wireless Power Transfer for Plug-In Hybrid Electric Transit Buses: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Lijuan; Gonder, Jeff; Burton, Evan; Brooker, Aaron; Meintz, Andrew; Konan, Arnaud

    2015-11-11

    This study evaluates the costs and benefits associated with the use of a plug-in hybrid electric bus and determines the cost effectiveness relative to a conventional bus and a hybrid electric bus. A sensitivity sweep analysis was performed over a number of a different battery sizes, charging powers, and charging stations. The net present value was calculated for each vehicle design and provided the basis for the design evaluation. In all cases, given present day economic assumptions, the conventional bus achieved the lowest net present value while the optimal plug-in hybrid electric bus scenario reached lower lifetime costs than the hybrid electric bus. The study also performed parameter sensitivity analysis under low market potential assumptions and high market potential assumptions. The net present value of plug-in hybrid electric bus is close to that of conventional bus.

  20. HYBRID TEACHER TRAINING: THE CONSTRUCTION OF PEDAGOGICAL PRACTICE AS ARTICULATOR AXIS FOR THE USE OF TECHNOLOGIES IN AN INCLUSIVE SCHOOL

    Directory of Open Access Journals (Sweden)

    Danielle Aparecida do Nascimento dos Santos

    2013-07-01

    Full Text Available This paper aims to present data related to the preparation, implementation, monitoring, development and evaluation of Articulator Axis: Inclusion and Special Education of hybrid Pedagogy UNIVESP/UNESP course. It is explained the theoretical, methodological and practical contributions that supported the organization of the discipline, designed with the premise to train teachers in order to provide analysis tools on the policies and practices of school inclusion of students of Special Education. As well as offering elements to teachers who attend the course for an analysis of practices and resources that can be used in the context of an inclusive school, through the promotion of school activities that develop the skills of all. The discipline was developed in five (5 blocks of 24 (twenty four hours per week, which were proposed activities and studies on the activities related to elementary and high school, aggregated to Specialized Educational Service and the use of Digital Information and Communication Technologies, according to the specific educational needs of students of Special Education and considering its importance within the policies of inclusion and its application in school contexts linked to the disciplines of didactic contents of the course.

  1. Buse_Francisella Medium

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset contains colony forming unit and qPCR data. This dataset is associated with the following publication: Morris, B., H. Buse, N. Adcock, and E. Rice. A...

  2. Articulating Atmospheres

    DEFF Research Database (Denmark)

    Kinch, Sofie

    2011-01-01

    This paper presents an architectural approach to designing computational interfaces by articulating the notion of atmosphere in the field of interaction design. It draws upon the concept of kinesthetic interaction and a philosophical notion on atmosphere emphasizing the importance of bodily...

  3. Buses involved in fatal accidents factbook 2007

    Science.gov (United States)

    2010-03-01

    This document presents aggregate statistics on buses involved in traffic accidents in 2007. The : statistics are derived from the Buses Involved in Fatal Accidents (BIFA) file, compiled by the : University of Michigan Transportation Research Institut...

  4. Current Leads, Links and Buses

    CERN Document Server

    Ballarino, A

    2014-01-01

    Electrical transfer from a room temperature power source to a superconducting system is done via conventional or superconducting current leads and superconducting buses or links. The principles of optimization of these devices are presented, with emphasis on the cryogenic, electrical, and superconductor related aspects that drive choices for a system.

  5. Current Leads, Links and Buses

    Energy Technology Data Exchange (ETDEWEB)

    Ballarino, A [European Organization for Nuclear Research, Geneva (Switzerland)

    2014-07-01

    Electrical transfer from a room temperature power source to a superconducting system is done via conventional or superconducting current leads and superconducting buses or links. The principles of optimization of these devices are presented, with emphasis on the cryogenic, electrical, and superconductor related aspects that drive choices for a system.

  6. Swisstrolley 3 - An articulated trolley bus; SWISSTROLLEY 3. Gelenktrolleybus

    Energy Technology Data Exchange (ETDEWEB)

    Gisler, H.-J.

    2006-07-01

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) takes a look at the Swisstrolley 3 low-floor, articulated trolley bus developed in Switzerland by the Hess AG company. Various features of the variants of the trolley bus, including single vehicle, single and double-articulated buses and bus trailers, are discussed. The reductions achieved in energy consumption, weight and noise are discussed. Typical values for power consumption are presented in graphical form. Economic viability and passenger-friendliness are examined, as are possibilities for further improvement.

  7. Buses involved in fatal accidents codebook 2008.

    Science.gov (United States)

    2011-03-01

    This report provides documentation for UMTRIs file of Buses Involved in Fatal Accidents (BIFA), 2008, : including distributions of the code values for each variable in the file. The 2008 BIFA file is a census of all : buses involved in a fatal acc...

  8. Buses involved in fatal accidents codebook 2007.

    Science.gov (United States)

    2009-12-01

    This report provides documentation for UMTRIs file of Buses Involved in Fatal Accidents (BIFA), 2007, : including distributions of the code values for each variable in the file. The 2007 BIFA file is a census of all : buses involved in a fatal acc...

  9. Real-time measurements of nitrogen oxide emissions from in-use New York City transit buses using a chase vehicle.

    Science.gov (United States)

    Shorter, Joanne H; Herndon, Scott; Zahniser, Mark S; Nelson, David D; Wormhoudt, Joda; Demerjian, Kenneth L; Kolb, Charles E

    2005-10-15

    New diesel engine technologies and alternative fuel engines are being introduced into fleets of mass transit buses to try to meet stricter emission regulations of nitrogen oxides and particulates: Real-time instruments including an Aerodyne Research tunable infrared laser differential absorption spectrometer (TILDAS) were deployed in a mobile laboratory to assess the impact of the implementation of the new technologies on nitrogen oxide emissions in real world driving conditions. Using a "chase" vehicle sampling strategy, the mobile laboratory followed target vehicles, repeatedly sampling their exhaust. Nitrogen oxides from approximately 170 in-use New York City mass transit buses were sampled during the field campaigns. Emissions from conventional diesel buses, diesel buses with continuously regenerating technology (CRT), diesel hybrid electric buses, and compressed natural gas (CNG) buses were compared. The chase vehicle sampling method yields real world emissions that can be included in more realistic emission inventories. The NO, emissions from the diesel and CNG buses were comparable. The hybrid electric buses had approximately one-half the NOx emissions. In CRT diesels, NO2 accounts for about one-third of the NOx emitted in the exhaust, while for non-CRT buses the NO2 fraction is less than 10%.

  10. Articulating feedstock delivery device

    Science.gov (United States)

    Jordan, Kevin

    2013-11-05

    A fully articulable feedstock delivery device that is designed to operate at pressure and temperature extremes. The device incorporates an articulating ball assembly which allows for more accurate delivery of the feedstock to a target location. The device is suitable for a variety of applications including, but not limited to, delivery of feedstock to a high-pressure reaction chamber or process zone.

  11. On Autonomous Articulated Vehicles

    OpenAIRE

    Nayl, Thaker

    2015-01-01

    The objective of this thesis is to address the problems of modeling, path planning and path following for an articulated vehicle in a realistic environment and in the presence of multiple obstacles.In greater detail, the problem of the kinematic modeling of an articulated vehicle is revisited through the proposal of a proper model in which the dimensions and properties of the vehicle can be fully described, rather than considering it as a unit point. Based on this approach, nonlinear and line...

  12. Gas Phase Emission Ratios From In-Use Diesel and CNG Curbside Passenger Buses in New York City

    Science.gov (United States)

    Herndon, S. C.; Shorter, J.; Canagaratna, M.; Jayne, J.; Nelson, D. D.; Wormhoudt, J. C.; Williams, P.; Silva, P. J.; Shi, Q.; Ghertner, A.; Zahniser, M.; Worsnop, D.; Kolb, C.; Lanni, T.; Drewnick, F.; Demerjian, K. L.

    2002-12-01

    The Aerodyne Mobile Laboratory simultaneously measured gas phase and particulate emissions from in use vehicles during two campaigns in New York City. The campaigns took place during two weeks in October, 2000 and four weeks in July-August, 2001. Passenger curbside buses were the primary focus of the study, but school buses and several other heavy duty diesel vehicles were also characterized. This paper describes the methodologies used to measure individual in use vehicles and presents the results of the gas phase measurements. Emission ratios for NO, NO2, SO2, N2O, CO, CH4 and H2CO relative to CO2 have been determined across several classes of buses. The gas phase concentrations were measured each second, using Tunable Infrared Laser Direct Absorption Spectroscopy (TILDAS). Some of the categories of buses into which the data has been sorted are; diesel (both 6V92 and Series 50) with and without the Continuous Regenerative Technology (CRT) retrofit, compressed natural gas powered(CNG) and hybrid diesel-electric buses. The New York Metropolitan Transit Authority (MTA) cooperated with this work, providing details about each of their buses followed. In addition to MTA buses, other New York City passenger bus operators were also measured. In September 2000, MTA began to switch to 30 ppm sulfur diesel fuel while it is believed the non MTA operators did not. The measured emission ratios show that low sulfur fuel greatly reduces the amount of SO2 per CO2. Roughly one third of the MTA fleet of diesel buses have been equipped with the CRT retrofit. The gas phase results of interest in this category show increased direct emission of NO2 and companion work (also submitted to the 12th CRC) show the impact the CRT refit has on particulate emissions. CNG buses show increased H2CO and CH4 emission ratios relative to diesel powered motors.

  13. Articulating Business Education Curricula.

    Science.gov (United States)

    McEwen, Beryl C.

    1998-01-01

    Responses from 75 of 108 business educators indicated that most students took business courses to develop both job and personal-use skills; more than 50% were college bound. A substantial overlap between skills taught in secondary and postsecondary business shows a strong possibility for curriculum articulation. (SK)

  14. Electric buses - An energy efficient urban transportation means

    Energy Technology Data Exchange (ETDEWEB)

    Kuehne, Reinhart [German Aerospace Center (DLR), Transportation Studies, Rutherfordstr. 2, 12489 Berlin (Germany)

    2010-12-15

    Bus transit systems with electric traction are an important contribution to the post fossil fuel mobility. Most renewable energy sources provide energy in the form of electricity. Electric motors thus have promise in the development of the way ''beyond oil''. The reactivation of trolley bus systems - grid bounded but also catenary free for short distances - paves this way. The design of modern trolley bus operations overcomes the existing disadvantages of conventional buses using fossil fuel. Germany has an efficient industry in this field, that offers braking energy recovery and energy storage in modern supercapacitors as well as technical and organisational innovations for a local emission free and a low noise transit system. Gentle but powerful when starting and braking, the trolley bus is cost effective and easy to integrate into an existing infrastructure. Such an electric bus system is ecological, customer-friendly and suitable for cities. It has a high economic efficiency and it also expands the traffic planning field towards an ecological future technology. This paper shows examples at home and abroad how electric buses achieve an energy solving modern urban traffic. It gives insights into technical developments of electric vehicle equipment, cateneries with fast driving handling characteristics and the use of plain electric and hybrid powertrains. (author)

  15. Activating Articulation Skills through Theraplay.

    Science.gov (United States)

    Kupperman, Phyllis; And Others

    1980-01-01

    Speech theraplay, a method of remediation for children with articulation disorders, is described. The approach is based on parent-child interactions that are postulated to activate articulation acquistion. The results of a six-week study indicated improvement in the articulation abilities of six children (3 to 4 years old) with this method.…

  16. The New Energy Buses in China

    DEFF Research Database (Denmark)

    Wang, Jingyu; Liu, Yingqi; Kokko, Ari

    2013-01-01

    With the advent of “low carbon” economy, new energy vehicles are increasingly favored by the Chinese government and manufacturers. New energy buses have become an important channel for the promotion of new energy utilizations. Based on the summary of policies, this paper conducts a thorough...

  17. Unit Monitors Manchester-Format Data Buses

    Science.gov (United States)

    Amador, Jose J.

    1994-01-01

    Circuit card converts data signals into convenient hexadecimal form for troubleshooting. Bus-monitoring unit converts data signals from Manchester II format used on data bus into hexadecimal format. Monitoring circuit causes hexadecimal words to display on video terminal, where test engineer compares them with hexadecimal records for troubleshooting. Circuit monitors one bus or two buses simultaneously.

  18. Articulating Material Criteria

    DEFF Research Database (Denmark)

    Hasling, Karen Marie

    2013-01-01

    , imitate and articulate the students’ inclusion of materials. This paper particularly discusses the experiences made and ideas generated after the execution of a material science course for second year students, with emphasis on the concept of the material selection matrix as an educational tool......This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe...

  19. Steering characteristic of an articulated bus under quasi steady maneuvering

    Science.gov (United States)

    Ubaidillah, Setiawan, Budi Agus; Aridharma, Airlangga Putra; Lenggana, Bhre Wangsa; Caesar, Bernardus Placenta Previo

    2018-02-01

    Articulated buses have been being preferred as public transportation modes due to their operational capacity. Therefore, passenger safety must be the priority of this public service vehicle. This research focused on the analytical approach of steering characteristics of an articulated bus when it maneuvered steadily. Such turning condition could be referred as a stability parameter of the bus for preliminary handling assessment. The analytical approach employed kinematics relationship between front and rear bodies as well as steering capabilities. The quasi steady model was developed to determine steering parameters such as turning radius, oversteer, and understeer. The mathematical model was useful for determining both coefficients of understeer and oversteer. The dimension of articulated bus followed a commonly used bus as utilized in Trans Jakarta busses. Based on the simulation, for one minimum center of the body, the turning radius was calculated about 8.8 m and 7.6 m at steady turning speed of 10 km/h. In neutral condition, the minimum road radius should be 6.5 m at 10 km/h and 6.9 m at 40 km/h. For two centers of the body and oversteer condition, the front body has the turning radius of 8.8 m, while, the rear body has the turning radius of 9.8 m at both turning speeds of 40 km/h. The other steering parameters were discussed accordingly.

  20. Alternative fuel buses currently in use in China: Life-cycle fossil energy use, GHG emissions and policy recommendations

    International Nuclear Information System (INIS)

    Ou Xunmin; Zhang Xiliang; Chang Shiyan

    2010-01-01

    The Chinese government has enacted policies to promote alternative vehicle fuels (AVFs) and alternative fuel vehicles (AFVs), including city bus fleets. The life cycle (LC), energy savings (ES) and GHG reduction (GR) profiles of AVFs/AFVs are critical to those policy decisions. The well-to-wheels module of the Tsinghua-CA3EM model is employed to investigate actual performance data. Compared with conventional buses, AFVs offer differences in performance in terms of both ES and GR. Only half of the AFVs analyzed demonstrate dual benefits. However, all non-oil/gas pathways can substitute oil/gas with coal. Current policies seek to promote technology improvements and market creation initiatives within the guiding framework of national-level diversification and district-level uniformity. Combined with their actual LC behavior and in keeping with near- and long-term strategies, integrated policies should seek to (1) apply hybrid electric technology to diesel buses; (2) encourage NG/LPG buses in gas-abundant cities; (3) promote commercialize electric buses or plug-in capable vehicles through battery technology innovation; (4) support fuel cell buses and hydrogen technology R and D for future potential applications; and (5) conduct further research on boosting vehicle fuel efficiency, applying low-carbon transportation technologies, and addressing all resultant implications of coal-based transportation solutions to human health and natural resources.

  1. Alternative fuel buses currently in use in China: Life-cycle fossil energy use, GHG emissions and policy recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Ou Xunmin, E-mail: oxm07@mails.tsinghua.edu.c [School of Public Policy and Management (SPPM), Tsinghua University, Beijing 100084 (China); China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China); Zhang Xiliang, E-mail: zhang_xl@tsinghua.edu.c [China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China); Chang Shiyan [China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China)

    2010-01-15

    The Chinese government has enacted policies to promote alternative vehicle fuels (AVFs) and alternative fuel vehicles (AFVs), including city bus fleets. The life cycle (LC), energy savings (ES) and GHG reduction (GR) profiles of AVFs/AFVs are critical to those policy decisions. The well-to-wheels module of the Tsinghua-CA3EM model is employed to investigate actual performance data. Compared with conventional buses, AFVs offer differences in performance in terms of both ES and GR. Only half of the AFVs analyzed demonstrate dual benefits. However, all non-oil/gas pathways can substitute oil/gas with coal. Current policies seek to promote technology improvements and market creation initiatives within the guiding framework of national-level diversification and district-level uniformity. Combined with their actual LC behavior and in keeping with near- and long-term strategies, integrated policies should seek to (1) apply hybrid electric technology to diesel buses; (2) encourage NG/LPG buses in gas-abundant cities; (3) promote commercialize electric buses or plug-in capable vehicles through battery technology innovation; (4) support fuel cell buses and hydrogen technology R and D for future potential applications; and (5) conduct further research on boosting vehicle fuel efficiency, applying low-carbon transportation technologies, and addressing all resultant implications of coal-based transportation solutions to human health and natural resources.

  2. Alternative fuel buses currently in use in China. Life-cycle fossil energy use, GHG emissions and policy recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Ou, Xunmin [School of Public Policy and Management (SPPM), Tsinghua University, Beijing 100084 (China); China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China); Zhang, Xiliang; Chang, Shiyan [China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China)

    2010-01-15

    The Chinese government has enacted policies to promote alternative vehicle fuels (AVFs) and alternative fuel vehicles (AFVs), including city bus fleets. The life cycle (LC), energy savings (ES) and GHG reduction (GR) profiles of AVFs/AFVs are critical to those policy decisions. The well-to-wheels module of the Tsinghua-CA3EM model is employed to investigate actual performance data. Compared with conventional buses, AFVs offer differences in performance in terms of both ES and GR. Only half of the AFVs analyzed demonstrate dual benefits. However, all non-oil/gas pathways can substitute oil/gas with coal. Current policies seek to promote technology improvements and market creation initiatives within the guiding framework of national-level diversification and district-level uniformity. Combined with their actual LC behavior and in keeping with near- and long-term strategies, integrated policies should seek to (1) apply hybrid electric technology to diesel buses; (2) encourage NG/LPG buses in gas-abundant cities; (3) promote commercialize electric buses or plug-in capable vehicles through battery technology innovation; (4) support fuel cell buses and hydrogen technology R and D for future potential applications; and (5) conduct further research on boosting vehicle fuel efficiency, applying low-carbon transportation technologies, and addressing all resultant implications of coal-based transportation solutions to human health and natural resources. (author)

  3. Method of controlling innovative articulation for articulated vehicle

    Directory of Open Access Journals (Sweden)

    Szumilas Mateusz

    2018-01-01

    Full Text Available Operation of an articulated vehicle is dependent on an appropriate damping action taking place in its rotary articulation. In order to analyse an impact of the control of the articulation on the motion of the vehicle a model of the vehicle with a controllable hydraulic damping system has been developed. A 90 degree turn and lane change manoeuvres were simulated using LabVIEW software. Modification of the damping parameters of the articulation, according to the velocity and articulation angle of the vehicle, proved to have a significant impact on the vehicle motion stability. Moreover, the sensor layer necessary for the control algorithm as well as the diagnostic system is described.

  4. Environmental Technology Assessment of Introducing Fuel Cell City Buses. A Case Study of Fuel Cell Buses in Goeteborg

    Energy Technology Data Exchange (ETDEWEB)

    Karlstroem, Magnus

    2002-07-01

    Over the last several years, fuel cell systems have improved. These advancements have increased the expectations that fuel cells are a feasible option for several applications such as transportation and stationary use. There are several reasons why fuel cell buses in city centres appear to be the most beneficial market niche to begin introducing the technology in. The goal of the report is to compile information about fuel cell buses relevant for city administrators working with public transport and environmental issues. A literature review of the fuel cells in buses is included. This study also consists of an environmental assessment of using fuel cell buses with hydrogen produced in various ways for buses on bus route 60 in Goeteborg by 2006. The fuel cell buses are compared with other bus and fuel alternatives. There are two goals of the case study: 1. The first goal is to describe the technical system, the methodology, and the problem for the intended audience. In the future, this study could help frame future investment decisions. 2. The second goal is to present environmental performance results---emission, health, monetary---relative the alternative bus technologies. The model calculations showed that the social benefits were approximately SEK 910,000 each year if all buses were fuel cell buses compared with developed diesel buses. If the fuel cell buses were compared to natural gas buses, then the benefits were SEK 860,000 each year. The benefits were SEK 1.39/bus/km compared with diesel buses or SEK 1.30/bus/km compared with natural gas buses.

  5. Evaluating real-world CO2 and NOX emissions for public transit buses using a remote wireless on-board diagnostic (OBD) approach.

    Science.gov (United States)

    Yang, Liuhanzi; Zhang, Shaojun; Wu, Ye; Chen, Qizheng; Niu, Tianlin; Huang, Xu; Zhang, Shida; Zhang, Liangjun; Zhou, Yu; Hao, Jiming

    2016-11-01

    The challenge to mitigate real-world emissions from vehicles calls for powerful in-use compliance supervision. The remote on-board diagnostic (OBD) approach, with wireless data communications, is one of the promising next-generation monitoring methods. We collected second-by-second profiles of carbon dioxide (CO 2 ) and nitrogen oxides (NO X ) emissions, driving conditions and engine performance for three conventional diesel and three hybrid diesel buses participating in a remote OBD pilot program in Nanjing, China. Our results showed that the average CO 2 emissions for conventional diesel and hybrid diesel buses were 816 ± 83 g km -1 and 627 ± 54 g km -1 , respectively, under a typical driving pattern. An operating mode binning analysis indicated that CO 2 emissions reduction by series-parallel hybrid technology was largely because of the significant benefits of the technology under the modes of low speed and low power demand. However, significantly higher CO 2 emissions were observed for conventional diesel buses during rush hours, higher than 1200 g km -1 . The OBD data suggested no improvement in NO X emission reduction for hybrid buses compared with conventional buses; both were approximately 12 g km -1 because of poor performance of the selective catalyst reduction (SCR) systems in the real world. Speed-dependent functions for real-world CO 2 and NO X emissions were also constructed. The CO 2 emissions of hybrid buses were much less sensitive to the average speed than conventional buses. If the average speed decreased from 20 km h -1 to 10 km h -1 , the estimated CO 2 emission factor for conventional buses would be increased by 34%. Such a change in speed would increase NO X emissions for conventional and hybrid buses by 38% and 56%, respectively. This paper demonstrates the useful features of the remote OBD system and can inform policy makers how to take advantage of these features in monitoring in-use vehicles. Copyright © 2016 Elsevier

  6. Alameda-Contra Costa Transit District (AC Transit) Fuel Cell Transit Buses: Preliminary Evaluation Results

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2007-03-01

    This report provides an evaluation of three prototype fuel cell-powered transit buses operating at AC Transit in Oakland, California, and six baseline diesel buses similar in design to the fuel cell buses.

  7. Environmental benefits of natural gas for buses

    International Nuclear Information System (INIS)

    Rabl, A.

    2002-01-01

    This paper presents a life cycle assessment comparing diesel buses with buses fueled by natural gas. The data for the emission of pollutants are based on the MEET Project of the European Commission (EC), supplemented by data measured for diesel and gas buses in Paris. The benefits of the gas fueled bus are then quantified using the damage cost estimates of the ExternE Project of the EC. A diesel bus with emissions equal to Standard EURO2 of the EC is compared with the same bus equipped with a natural gas engine, for use in Paris and in Toulouse. The damage cost of a diesel bus is significant, in the range of 0.4-1.3 euro/km. Natural gas allows an appreciable reduction of the emissions, lowering the damage cost by a factor of about 2.5 (Toulouse) to 5.5 (Paris). An approximate rule is provided for transferring the results to other cities. A sensitivity analysis is carried out to evaluate the effect of the evolution of the emissions standard towards EURO3, 4 and 5, as well as the effect of uncertainties. Finally a comparison is presented between a EURO2 diesel bus with particle filter, and a gas fueled bus with the MPI engine of IVECO, a more advanced and cleaner technology. With this engine the damage costs of the gas fueled bus are about 3-5 times lower than those of the diesel with particle filter, even though the latter has already very low emissions.(author)

  8. data sets Simulations in articulating light-weight PRS

    NARCIS (Netherlands)

    Van den Berg, Bert

    2008-01-01

    The data sets are output of 3 different steps in the development a simulations of a PRS as described in chapter 3.3: Simulations in articulating light-weight PRS A case for Pedagogy-oriented and Rating-based Hybrid Recommendation Strategies Rob Nadolski, Bert van den Berg, Adriana Berlanga, Hans

  9. Communication Buses and Protocols for Sensor Networks

    Directory of Open Access Journals (Sweden)

    Andrew Mason

    2002-07-01

    Full Text Available This paper overviews existing digital communication buses which are commonly used in sensor networks, discusses sensor network architectures, and introduces a new sensor bus for low power microsystem applications. The new intra-module multi-element microsystem (IM2 bus is nine-line interface with 8b serial data which implements several advanced features such as power management and plug-n-play while maintaining minimum hardware overhead at the sensor node. Finally, some issues in wireless sensor networking are discussed. The coverage of these issues provides a guideline for choosing the appropriate bus for different sensor network applications.

  10. COORDINATION OF THE WORK OF BUSES IN CITY ROUTES

    Directory of Open Access Journals (Sweden)

    Fuad DASHDAMIROV

    2013-12-01

    Full Text Available The paper studied the work of bus routes passing through a street. Optimality criterion was chosen for the development of appropriate models of effective work of buses on the land. The paper proposes a new model costing time passengers at bus stops. A method of technique was developed to coordinate the buses running on the combined section of route.

  11. 49 CFR 393.89 - Buses, driveshaft protection.

    Science.gov (United States)

    2010-10-01

    ... ACCESSORIES NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.89 Buses, driveshaft protection. Any driveshaft extending lengthways under the floor of the passenger compartment of a bus shall... 49 Transportation 5 2010-10-01 2010-10-01 false Buses, driveshaft protection. 393.89 Section 393...

  12. 49 CFR 393.90 - Buses, standee line or bar.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Buses, standee line or bar. 393.90 Section 393.90 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.90 Buses, standee line or bar. Except...

  13. 46 CFR 111.30-19 - Buses and wiring.

    Science.gov (United States)

    2010-10-01

    ... control wiring must be— (1) Suitable for installation within in a switchboard enclosure and be rated at 90... 46 Shipping 4 2010-10-01 2010-10-01 false Buses and wiring. 111.30-19 Section 111.30-19 Shipping... REQUIREMENTS Switchboards § 111.30-19 Buses and wiring. (a) General. Each bus must meet the requirements of...

  14. Big Brother Is Watching: Video Surveillance on Buses

    Science.gov (United States)

    Sloggett, Joel

    2009-01-01

    Many school districts in North America have adopted policies to permit cameras on their properties and, when needed, on buses used to transport students. With regard to school buses, the camera is typically a tool for gathering information to monitor behavior or to help investigate a complaint about behavior. If a picture is worth a thousand…

  15. 49 CFR 392.63 - Towing or pushing loaded buses.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Towing or pushing loaded buses. 392.63 Section 392... COMMERCIAL MOTOR VEHICLES Prohibited Practices § 392.63 Towing or pushing loaded buses. No disabled bus with... passengers aboard for the purpose of towing or pushing any disabled motor vehicle, except in such...

  16. Hybrid vehicle potential assessment. Volume 7: Hybrid vehicle review

    Science.gov (United States)

    Leschly, K. O.

    1979-01-01

    Review of hybrid vehicles built during the past ten years or planned to be built in the near future is presented. An attempt is made to classify and analyze these vehicles to get an overall picture of their key characteristics. The review includes onroad hybrid passenger cars, trucks, vans, and buses.

  17. Hydrogen fuelled buses: Italian ENEA research program

    International Nuclear Information System (INIS)

    Ambrosini, G.; Ciancia, A.; Pede, G.

    1993-01-01

    Current hydrogen automotive fuels research studies being conducted by ENEA (Italian Agency for New Technology, Energy and the Environment) are being targeted towards the development of hydrogen fueled vans and buses for use in highly polluted urban environments where the innovative vehicles' air pollution abatement characteristics would justify their high operating costs as compared with those of conventional automotive alternatives. The demonstration vehicle being used in the experimental studies and performance tests is a two liter minibus with a spark ignition engine power rated at 55 kW with gasoline operation and 45 kW with hydrogen. Detailed design notes are given regarding the retrofitting of the minibus chassis to house the aluminium gas storage tanks and the adaptation of the engine to operate with compressed hydrogen. Attention is given to efforts being made to resolve combustion control and fueling problems. Focus is on the progress being made in the development of an efficient and safe electronically controlled fuel injection system

  18. New buses and links for data acquisition

    International Nuclear Information System (INIS)

    Mueller, H.; Bogaerts, A.; McLaren, R.; Parkman, C.; Linnhoefer, D.

    1992-01-01

    Bus standards for data acquisition have been vital for the construction and operation of medium and large HEP experiments. The recent industry bus standardisation effort will soon release the next generation of high performance buses and links for scalable systems. Prototype components, VLSI chips and board-level systems are already announced. Layers of the new bus specifications cover wide areas of applications and provide possibilities to define specific bus profiles by interest groups. New, innovative solutions which are needed for high rate experiments are becoming visible. These will provide novel architectural possibilities, very high bandwidth, fast silicon, industry support and new metric mechanical standards. Interconnected via standard bridges, different bus standards can be used to cover the varying requirements from the front ends to the computers. (orig.)

  19. 76 FR 53102 - Federal Motor Vehicle Safety Standards; Denial of Petition for Rulemaking; School Buses

    Science.gov (United States)

    2011-08-25

    ... small school buses to provide adequate crash protection for the occupants. For large school buses, FMVSS... and crash protection,'' requires lap/shoulder belts for all seating positions on small school buses... for adequate occupant crash protection. For large school buses, we have determined there is not a...

  20. Buse_Francisella and free-living amoebae data sets

    Data.gov (United States)

    U.S. Environmental Protection Agency — Co-infection data in the form of colony forming units and amoeba cell counts. This dataset is associated with the following publication: Buse , H., F. Schaefer, and...

  1. Natural gas drive for city buses in Skopje

    International Nuclear Information System (INIS)

    Dimitrovski, Mile; Veljanovski, Krsto; Dimitrovski, Dame

    2002-01-01

    Emission improvement in both city centers and conurbations is an important factor which developers of public-utility vehicles and buses must take into account. If natural gas is used as a fuel the emission is considerably lower than that from conventional diesel drive. Thus it is an important contribution to keep the air clean in the area where the vehicles are deployed. In this paper the project 'Ecological Natural gas drive for city buses in Skopje' is analysed. (Original)

  2. 21 CFR 872.6140 - Articulation paper.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Articulation paper. 872.6140 Section 872.6140 Food... DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6140 Articulation paper. (a) Identification. Articulation paper is a device composed of paper coated with an ink dye intended to be placed between the...

  3. Particle and gaseous emissions from individual diesel and CNG buses

    Directory of Open Access Journals (Sweden)

    Å. M. Hallquist

    2013-05-01

    Full Text Available In this study size-resolved particle and gaseous emissions from 28 individual diesel-fuelled and 7 compressed natural gas (CNG-fuelled buses, selected from an in-use bus fleet, were characterised for real-world dilution scenarios. The method used was based on using CO2 as a tracer of exhaust gas dilution. The particles were sampled by using an extractive sampling method and analysed with high time resolution instrumentation EEPS (10 Hz and CO2 with a non-dispersive infrared gas analyser (LI-840, LI-COR Inc. 1 Hz. The gaseous constituents (CO, HC and NO were measured by using a remote sensing device (AccuScan RSD 3000, Environmental System Products Inc.. Nitrogen oxides, NOx, were estimated from NO by using default NO2/NOx ratios from the road vehicle emission model HBEFA3.1. The buses studied were diesel-fuelled Euro III–V and CNG-fuelled Enhanced Environmentally Friendly Vehicles (EEVs with different after-treatment, including selective catalytic reduction (SCR, exhaust gas recirculation (EGR and with and without diesel particulate filter (DPF. The primary driving mode applied in this study was accelerating mode. However, regarding the particle emissions also a constant speed mode was analysed. The investigated CNG buses emitted on average a higher number of particles but less mass compared to the diesel-fuelled buses. Emission factors for number of particles (EFPN were EFPN, DPF = 4.4 ± 3.5 × 1014, EFPN, no DPF = 2.1 ± 1.0 × 1015 and EFPN, CNG = 7.8 ± 5.7 ×1015 kg fuel−1. In the accelerating mode, size-resolved emission factors (EFs showed unimodal number size distributions with peak diameters of 70–90 nm and 10 nm for diesel and CNG buses, respectively. For the constant speed mode, bimodal average number size distributions were obtained for the diesel buses with peak modes of ~10 nm and ~60 nm. Emission factors for NOx expressed as NO2 equivalents for the diesel buses were on average 27 ± 7 g (kg fuel−1 and for the CNG buses 41

  4. Reliability Evaluation Of The City Transport Buses Under Actual Conditions

    Directory of Open Access Journals (Sweden)

    Rymarz Joanna

    2015-12-01

    Full Text Available The purpose of this paper was to present a reliability comparison of two types of city transport buses. Case study on the example of the well-known brands of city buses: Solaris Urbino 12 and Mercedes-Benz 628 Conecto L used at Municipal Transport Company in Lublin was presented in details. A reliability index for the most failure parts and complex systems for the period of time failures was determined. The analysis covered damages of the following systems: engine, electrical system, pneumatic system, brake system, driving system, central heating and air-conditioning and doors. Reliability was analyzed based on Weibull model. It has been demonstrated, that during the operation significant reliability differences occur between the buses produced nowadays.

  5. Lagrangian Hotspots of In-Use NOX Emissions from Transit Buses.

    Science.gov (United States)

    Kotz, Andrew J; Kittelson, David B; Northrop, William F

    2016-06-07

    In-use, spatiotemporal NOX emissions were measured from a conventional powertrain transit bus and a series electric hybrid bus over gradients of route kinetic intensity and ambient temperature. This paper introduces a new method for identifying NOX emissions hotspots along a bus route using high fidelity Lagrangian vehicle data to explore spatial interactions that may influence emissions production. Our study shows that the studied transit buses emit higher than regulated emissions because on-route operation does not accurately represent the range of engine operation tested according to regulatory standards. Using the Lagrangian hotspot detection, we demonstrate that NOX hotspots occurred at bus stops, during cold starts, on inclines, and for accelerations. On the selected routes, bus stops resulted in 3.3 times the route averaged emissions factor in grams/km without significant dependence on bus type or climate. The buses also emitted 2.3 times the route averaged NOX emissions factor at the beginning of each route due to cold selective catalytic reduction aftertreatment temperature. The Lagrangian hotspot detection technique demonstrated here could be employed in future connected vehicles empowered by advances in computational power, data storage capability, and improved sensor technology to optimize emissions as a function of spatial location.

  6. Air quality in inter-city buses : final report

    International Nuclear Information System (INIS)

    2005-01-01

    Various studies have suggested that air quality inside automobiles and school buses may be poorer than ambient or nearby air quality, and that concentrations of vehicle-related pollutants in city buses may be sufficiently elevated to pose concerns for vehicle occupants and operators. This paper presented the results of preliminary investigation of levels of some pollutants in inter-city buses to determine whether a fuller investigation is warranted. Another objective of the investigation was to develop methods for assessing air quality within road vehicles. Students carried monitoring equipment on 28 inter-city trips made by Greyhound Canada buses during July and August 2004. The equipment recorded average levels of carbon monoxide (CO) and nitrogen dioxide (NO 2 ), as well as concentrations of particulate matter. Bus routes were selected that allowed for an average of 10 hours of total sampling time in a day. Data was recorded on pumps, run times and routes taken. Results indicated that levels of CO in the buses were much lower than the national standard of acceptable levels for CO. Levels of NO 2 were on average lower, but 5 of the 19 recorded values exceeded acceptable levels. Average particulate levels recorded in the buses were considered acceptable, although some of the recorded levels were higher than desirable. It was concluded that further work on in-vehicle levels of NO 2 and particulate matter could be warranted. Although several procedural and equipment problems were encountered, the methods used in the investigation appeared to be valid, and were thought to be suitable for further work on in-vehicle concentrations of pollutants. 21 refs

  7. Alternative Fuels Data Center: Pennsylvania School Buses Run on Natural Gas

    Science.gov (United States)

    Pennsylvania School Buses Run on Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Pennsylvania School Buses Run on Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Pennsylvania School Buses Run on Natural Gas on Twitter Bookmark Alternative Fuels Data Center

  8. Life Cycle Assessment of Diesel and Electric Public Transportation Buses

    Science.gov (United States)

    The Clean Air Act identifies diesel powered motor vehicles, including transit buses, as significant sources of several criteria pollutants which contribute to ground level ozone formation or smog. The effects of air pollution in urban areas are often more significant due to con...

  9. Luxurious Buses As Means Of Night Journey In Nigeria: Challenges ...

    African Journals Online (AJOL)

    transfer to discourage robbery cases on our roads. Passengers should also keep their traveling plans secret as much as possible as a way of fostering safety. Keywords: night journey, armed robbers, luxurious buses and police escorts. Ethiopian Journal of Environmental Studies and Management Vol. 1 (3) 2008: pp. 52-62.

  10. Parallel Hybrid Vehicle Optimal Storage System

    Science.gov (United States)

    Bloomfield, Aaron P.

    2009-01-01

    A paper reports the results of a Hybrid Diesel Vehicle Project focused on a parallel hybrid configuration suitable for diesel-powered, medium-sized, commercial vehicles commonly used for parcel delivery and shuttle buses, as the missions of these types of vehicles require frequent stops. During these stops, electric hybridization can effectively recover the vehicle's kinetic energy during the deceleration, store it onboard, and then use that energy to assist in the subsequent acceleration.

  11. Multi-criteria analysis of alternative-fuel buses for public transportation

    International Nuclear Information System (INIS)

    Tzeng, G.-H.; Lin, C.-W.; Opricovic, Serafim

    2005-01-01

    The technological development of buses with new alternative fuels is considered in this paper. Several types of fuels are considered as alternative-fuel modes, i.e., electricity, fuel cell (hydrogen), and methanol. Electric vehicles may be considered the alternative-fuel vehicles with the lowest air pollution. Hybrid electric vehicles provide an alternate mode, at least for the period of improving the technology of electric vehicles. A hybrid electric vehicle is defined as a vehicle with the conventional internal combustion engine and an electric motor as its major sources of power. Experts from different decision-making groups performed the multiple attribute evaluation of alternative vehicles. AHP is applied to determine the relative weights of evaluation criteria. TOPSIS and VIKOR are compared and applied to determine the best compromise alternative fuel mode. The result shows that the hybrid electric bus is the most suitable substitute bus for Taiwan urban areas in the short and median term. But, if the cruising distance of the electric bus extends to an acceptable range, the pure electric bus could be the best alternative

  12. Linearized motion estimation for articulated planes.

    Science.gov (United States)

    Datta, Ankur; Sheikh, Yaser; Kanade, Takeo

    2011-04-01

    In this paper, we describe the explicit application of articulation constraints for estimating the motion of a system of articulated planes. We relate articulations to the relative homography between planes and show that these articulations translate into linearized equality constraints on a linear least-squares system, which can be solved efficiently using a Karush-Kuhn-Tucker system. The articulation constraints can be applied for both gradient-based and feature-based motion estimation algorithms and to illustrate this, we describe a gradient-based motion estimation algorithm for an affine camera and a feature-based motion estimation algorithm for a projective camera that explicitly enforces articulation constraints. We show that explicit application of articulation constraints leads to numerically stable estimates of motion. The simultaneous computation of motion estimates for all of the articulated planes in a scene allows us to handle scene areas where there is limited texture information and areas that leave the field of view. Our results demonstrate the wide applicability of the algorithm in a variety of challenging real-world cases such as human body tracking, motion estimation of rigid, piecewise planar scenes, and motion estimation of triangulated meshes.

  13. [The temporo-mandibular articulation].

    Science.gov (United States)

    Dargaud, J; Vinkka-Puhakka, H

    2004-04-01

    The standing posture of humans has created both morphological and functional adaptations in the temporo-mandibular joint and the masticatory function. This biped state is the one of the most important characteristic of human evolution. It is furthermore the agent determining most of the functional changes in the whole body. This survey will be carried out in several levels including, a descriptive anatomy, biomechanics, radiological imaging, functioning in the articulation of TMJ. The descriptive anatomic picture will be obtained by the traditional dissection techniques. 20 TMJ joints are dissected from 10 cadavers: 7 cadavers, 65-75 year old, 3 cadavers, 60-65 year old. The x-rays are lateral view and the subjects of the radiological imaging are young's, adults and olds: 1, 3 y-old Male; 1, 7 y-old Female; 1, 14 y-old Female; 10, 19-23 y-old Male; 1, 26 y-old Female; 1, 34 y-old Male; 1, 75 y-old Female. The anatomic elements in the TMJ well resembled the ones described in the literature of the capsule, the ligament, the masticator muscles (masseter, temporal, medial and lateral pterygoids). The temporo-mandibular ligament proved to be difficult to separate from the capsule in some of the specimens. Sometimes it was not always found after a dissection.

  14. The Aerodynamics of Heavy Vehicles III : Trucks, Buses and Trains

    CERN Document Server

    Orellano, Alexander

    2016-01-01

    This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future.   This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.  The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.

  15. NREL Evaluates Performance of Fast-Charge Electric Buses

    Energy Technology Data Exchange (ETDEWEB)

    2016-09-16

    This real-world performance evaluation is designed to enhance understanding of the overall usage and effectiveness of electric buses in transit operation and to provide unbiased technical information to other agencies interested in adding such vehicles to their fleets. Initial results indicate that the electric buses under study offer significant fuel and emissions savings. The final results will help Foothill Transit optimize the energy-saving potential of its transit fleet. NREL's performance evaluations help vehicle manufacturers fine-tune their designs and help fleet managers select fuel-efficient, low-emission vehicles that meet their bottom line and operational goals. help Foothill Transit optimize the energy-saving potential of its transit fleet. NREL's performance evaluations help vehicle manufacturers fine-tune their designs and help fleet managers select fuel-efficient, low-emission vehicles that meet their bottom line and operational goals.

  16. Confusion errors and false manoeuvres at power buses

    International Nuclear Information System (INIS)

    Cernes, A.

    1985-09-01

    The incident at Bugey 5 on 14th April 1984, which is regarded as one of the most important in recent years has alas shown again that unless dealt with by the operators in good time, failure of a rectifier supplying one of the buses may soon lead to a very serious situation, in this particular instance voltage loss on the train A 48 volt supply from the two offsite electrical sources and train A diesel generator. Operating experience feedback of the past three years reveals that although the Bugey incident is undoubtedly the most serious, it is not the only where a major alarm was not taken into consideration until fairly late by the operators, and other types of error with far from negligible consequences have occurred during repair work on buses. After a brief reminder of the role and layout of buses, statistics of all incidents of this type in recent years are described and a few cases are presented in order to give some idea of the range of situations encountered. The main measures aimed at reducing the number of incidents of this type are then presented, bearing in mind that one cannot hope to remove the possibility of this type of failure entirely. It may also be noted that the large number of such errors during the night shift or at the very beginning of the morning shift is no doubt connected with the well-known fact that operators are less vigilant at such times

  17. Design articulation for Aesthetics of Interaction

    DEFF Research Database (Denmark)

    Krogh, Peter; Graves Petersen, Marianne

    2009-01-01

    In this paper we present three categories of design articulations addressing the characteristic qualities of aesthetics of interaction. By aesthetics of interaction we point to the process in which interactive technology brings about aesthetic experience in the use of interactive technology......-designers. In this case the categories of design articulations frame intended aesthetic experiences. Our mission is that of using aesthetic theory to inform the design of interactive technology, which shapes aesthetic experiences in everyday use....

  18. Unscented Kalman filtering for articulated human tracking

    DEFF Research Database (Denmark)

    Boesen Lindbo Larsen, Anders; Hauberg, Søren; Pedersen, Kim Steenstrup

    2011-01-01

    We present an articulated tracking system working with data from a single narrow baseline stereo camera. The use of stereo data allows for some depth disambiguation, a common issue in articulated tracking, which in turn yields likelihoods that are practically unimodal. While current state...... with superior results. Tracking quality is measured by comparing with ground truth data from a marker-based motion capture system....

  19. 78 FR 2868 - Draft Environmental Assessment for Rulemaking To Establish Minimum Sound Requirements for Hybrid...

    Science.gov (United States)

    2013-01-14

    ... require hybrid and electric passenger cars, light trucks, medium and heavy duty trucks and buses, low... Sound Requirements for Hybrid and Electric Vehicles AGENCY: National Highway Traffic Safety... minimum sound requirements for hybrid and electric vehicles. DATES: Comments must be received on or before...

  20. To Evaluate Zero Emission Propulsion and Support Technology for Transit Buses

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Chandler; Leslie Eudy

    2006-11-01

    This report provides evaluation results for prototype fuel cell transit buses operating at Santa Clara Valley Transportation Authority (VTA) in San Jose, California, in partnership with the San Mateo County Transit District in San Carlos, California. VTA has been operating three fuel cell transit buses in extra revenue service since February 28, 2005. This report provides descriptions of the equipment used, early experiences, and evaluation results from the operation of the buses and the supporting hydrogen infrastructure from March 2005 through July 2006.

  1. Environmental, health, and safety issues of fuel cells in transportation. Volume 1: Phosphoric acid fuel-cell buses

    Energy Technology Data Exchange (ETDEWEB)

    Ring, S

    1994-12-01

    The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase I of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, through a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase III. After completing Phase II, DOE plans a comprehensive performance testing program (Phase HI) to verify that the buses meet stringent transit industry requirements. The Phase III study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on these issues. The study examines health and safety together because they are integrally related. In addition, this report briefly discusses two environmental issues that are of concern to the Environmental Protection Agency (EPA). The first issue involves a surge battery used by the PAFC bus that contains hazardous constituents. The second issue concerns the regulated air emissions produced during operation of the PAFC bus.

  2. Gender Issues and Language Articulation; a Brief Look at Pros of Gender Neutral Language Articulation

    Science.gov (United States)

    Ebrahimi, Pouria

    2009-01-01

    As with the language articulated by learners--in both oral and written form--the supremacy of a masculine language use is witnessed. This brings to light the fact that gender has been excessively an unobserved factor in the process of language teaching. Although learners are apparently used to forming masculine-centered articulation, non-sexist…

  3. [The controversy of routine articulator mounting in orthodontics].

    Science.gov (United States)

    Wang, Li; Han, Xianglong; Bai, Ding

    2013-06-01

    Articulators have been widely used by clinicians of dentistry. But routine articulator mounting is still controversial in orthodontics. Orthodontists oriented by gnathology approve routine articulator mounting while nongnathologic orthodontists disapprove it. This article reviews the thoughts of orthodontist that they agree or disagree with routine articulator mounting based on the considerations of biting, temporomandibular disorder (TMD), periodontitis, and so on.

  4. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2010

    Science.gov (United States)

    2010-11-11

    This past year has been one of transition for the introduction of fuel cell transit buses. The existing generation of fuel cell buses from Van Hool and UTC Power has continued to operate in service at three transit agencies. At the same time, a new g...

  5. Charging cost optimization for EV buses using neural network based energy predictor

    NARCIS (Netherlands)

    Nageshrao, S.P.; Jacob, J.; Wilkins, S.

    2017-01-01

    For conventional buses, based on the decades of their operational knowledge, public transport companies are able to optimize their cost of operation. However, with recent trend in the usage of electric buses, cost optimal operation can become challenging. In this paper an offline optimal charging

  6. The Bus Stops Here: The Case for Biodiesel in School Buses.

    Science.gov (United States)

    Rao, Steven T.

    2002-01-01

    Suggests that diesel exhaust from most of the nation's school buses may be hazardous to children's health. Documents studies on the nature and potential magnitude of the risk to children and proposes replacing petroleum diesel with biodiesel as the fuel for school buses. Presents the merits and practicality of switching to biodiesel as a healthier…

  7. Modeling of passengers' safety perception for buses on mountainous roads.

    Science.gov (United States)

    Khoo, Hooi Ling; Ahmed, Muaid

    2018-04-01

    This study had developed a passenger safety perception model specifically for buses taking into consideration the various factors, namely driver characteristics, environmental conditions, and bus characteristics using Bayesian Network. The behaviour of bus driver is observed through the bus motion profile, measured in longitudinal, lateral, and vertical accelerations. The road geometry is recorded using GPS and is computed with the aid of the Google map while the perceived bus safety is rated by the passengers in the bus in real time. A total of 13 variables were derived and used in the model development. The developed Bayesian Network model shows that the type of bus and the experience of the driver on the investigated route could have an influence on passenger's perception of their safety on buses. Road geometry is an indirect influencing factor through the driver's behavior. The findings of this model are useful for the authorities to structure an effective strategy to improve the level of perceived bus safety. A high level of bus safety will definitely boost passenger usage confidence which will subsequently increase ridership. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Extensional Information Articulation from the Universe

    Directory of Open Access Journals (Sweden)

    Yasufumi Saruwatari

    2012-11-01

    Full Text Available Information must have physical support and this physical universe comprisesphysical interactions. Hence actual information processes should have a description byinteractions alone, i.e., an extensional description. In this paper, such a model of the processof information articulation from the universe is developed by generalizing the extensivemeasurement theory in metrology. Moreover, a model of the attribute creation processis presented to exemplify a step of the informational articulation process. These modelsdemonstrate the valuableness of the extensional view and are expected to enhance theunderstanding of the extensional aspects of fundamentals of information.

  9. On the issue of selecting technical and operational parameters for buses in urban passenger routes

    Directory of Open Access Journals (Sweden)

    Rudzinskyi V.V.

    2017-10-01

    Full Text Available Problems of a public transport bus service in urban areas were analyzed. The aim of the article is to determine actual operational parameters of buses during passenger transportation in Zhytomyr. Ways of determining technical and operational parameters of buses were developed using visual and tabular methods of city buses real-time speed and acceleration performance registration by GPS-monitoring system with the help of a communicational and informational intelligent transport system of the city. Experimental studies of city buses motion parameters were presented. A comprehensive survey of passenger traffic and conditions of public transport functioning in Zhytomyr was carried out. The values of technical and operational parameters of buses on city routes were obtained. Preliminarily conclusions and recommendations considering the criteria for selecting the optimal rolling stock for a bus network of the city were suggested.

  10. Using Task Clarification, Goal Setting, and Feedback to Decrease Table Busing Times in a Franchise Pizza Restaurant

    Science.gov (United States)

    Amigo, Seth; Smith, Andrew; Ludwig, Timothy

    2008-01-01

    The current study investigated the effects of task-clarification, and manager verbal and graphic feedback on employee busing times at a pizza restaurant. Using an ABC design, task-clarification was provided in a memo, which described the process, priority, and goal time of busing. The busing time decreased slightly, from an average of 315 seconds…

  11. Articulation Workshop in Drafting. Final Report.

    Science.gov (United States)

    Catonsville Community Coll., MD.

    Drafting students from vocational/technical and high schools frequently repeat the same experiences and courses and work with the same instructional materials when they enroll in college engineering drawing, and architecture programs. In order to minimize needless repetition and address the problem of articulation between such schools and the…

  12. Ties That Bind: Default, Accreditation, and Articulation.

    Science.gov (United States)

    Prager, Carolyn

    1995-01-01

    Examines changes in the accreditation environment and the resulting implications for the articulation of students from for-profit to not-for-profit institutions such as community colleges. Indicates that the costs of programmatic redundancy and duplication brought about by mission convergence at these institutions will emerge as a major policy…

  13. Articulation Skills in Spanish-Speaking Children.

    Science.gov (United States)

    Linares, Thomas A.

    The purpose of the research was to develop an articulation test for Spanish-speakers and to field-test the instrument in both a monolingual Spanish-speaking environment and a bilingual Spanish/English environment. Such a test is needed because there has been little available to enable the diagnostician, whose clientele includes Spanish-speakers,…

  14. Computer Animation for Articulated 3D Characters

    NARCIS (Netherlands)

    Kiss, S.

    2002-01-01

    We present a review of the computer animation literature, mainly concentrating on articulated characters and at least some degree of interactivity or real time simulation. Advances in dierent techniques such as key-frame, motion capture (also known as mocap), dynamics, inverse kinematics (IK),

  15. Perceptual Articulation in Three Middle Eastern Culture

    Science.gov (United States)

    Amir, Yehuda

    1975-01-01

    Noting that one would expect that members of cultural groups whose modes of child rearing foster individual autonomy would achieve more articulated perceptual functioning rather than persons reared in societies where conformity and emotional dependence are stressed, this article discusses a study which compared two Israeli sub-groups and two…

  16. Articulation of tacit and complex knowledge

    DEFF Research Database (Denmark)

    Kristiansen, Per; Hansen, Poul H. Kyvsgård; Nielsen, Louise Møller

    2009-01-01

    The paper focuses on the articulation of tacit and complex knowledge by taking outset in a specific methodology: LEGO® SERIOUS PLAYTM. In order to expand the methodology and to develop it further we propose to regard it as a language. By choosing a language view we are able to ably a language...

  17. Experimental Engineering: Articulating and Valuing Design Experimentation

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Grönvall, Erik; Fritsch, Jonas

    2017-01-01

    In this paper we propose Experimental Engineering as a way to articulate open- ended technological experiments as a legitimate design research practice. Experimental Engineering introduces a move away from an outcome or result driven design process towards an interest in existing technologies and...

  18. The School and the Articulation of Values.

    Science.gov (United States)

    Lovin, Robin W.

    1988-01-01

    Value neutrality and values clarification fail to foster critical thinking about values. The values articulation approach identifies the rationality that is applied to value claims. It avoids noncognitivism and moral relativism and suggests ways the discussion of values in the classroom prepares students to deal with broader moral issues. (VM)

  19. Fuel consumption reduction in urban buses by using power split transmissions

    International Nuclear Information System (INIS)

    Macor, Alarico; Rossetti, Antonio

    2013-01-01

    Highlights: • Fuel consumption is highly influenced by transmission layout and control. • Continuous Variable Transmission allows control of the working point of the engine. • Hydromechanical CVT was numerically tested and compared with usual mechanical solutions. • CVT solution proved to reduce fuel consumption, improving the I.C.E. mean efficiency. • Results obtained from standard emission test cycles: New York and Manhattan Buses. - Abstract: The reduction of fuel consumption of urban vehicles is one of the challenges of the society today. Many promising technologies such as hybrid electric vehicles and fuel cells are the focus of a lot of research and investments, but high costs prevent their development on a large scale, especially in heavy duty vehicles. Simpler solutions, such as continuously variable transmissions, are then interesting alternatives: they preserve some of the advantages of hybrid solutions significantly reducing the overall cost of the system. Since these technologies allow the decoupling of the engine’s velocity from that of the wheels, optimised management of the engine becomes feasible, leading to lower fuel consumption than that of traditional solutions. This work compares the hydromechanical transmission with a traditional power shift in an application where efficiency and comfort are required: a city bus. The performance of a vehicle with a dual stage hydromechanical transmission has been investigated by means of a model implemented in the AMESim environment. A second model of a vehicle with a power shift transmission has been taken as reference solution. During the simulation of two standard test cycles, the first vehicle showed the lower fuel consumption, due to its better engine management, and to the operation of the torque converter during starts, which lowers the efficiency of the reference vehicle

  20. Txatarra: vivienda transitoria con buses de transporte público

    Directory of Open Access Journals (Sweden)

    Juan Pablo Arenas Vargas

    2011-07-01

    Full Text Available El presente análisis del proyecto Casa Linda parte de una exploración conceptual en torno a un hábitat sostenible, mediante la generación de un tipo de vivienda transitoria que reutiliza buses de transporte público destinados a ser reducidos a chatarra. La necesidad de replantear la labor de configurar espacios con materiales y formas predeterminados llevó a los autores a comprender cómo resultan insuficientes los medios tradicionales de construcción, en los que se acostumbra emplear materias primas en presentaciones estandarizadas y con acabados predefinidos que se adaptan a los requerimientos y necesidades del proyecto. Enfrentar el proyecto a partir del reciclaje de materiales y objetos (chatarra, de diversas dimensiones y en variadas condiciones, generó un proceso cuya característica principal es la imposibilidad de anticipar con exactitud los procesos constructivos y los acabados finales.

  1. An updated assessment of the prospects for fuel cell-powered buses. An information paper

    Energy Technology Data Exchange (ETDEWEB)

    Sanderson, T.K. [Future Energy Solutions, Harwell (United Kingdom)

    2005-07-01

    This report presents updated conclusions of the Department of Trade and Industry's research and development programme to assess the commercial prospects for advanced fuel cells in buses. The programme has focussed on low temperature solid polymer fuel cells (SPFCs) for transport and combined heat and power (CHP)/distributed power and high temperature solid oxide fuel cells (SOFCs) for CHP/distributed power. As well as assessing the prospects for SPFCs in buses, the report examines those for alkaline fuel cells (AFCs) and phosphoric acid fuel cells (PAFCs) in buses. The report provides an assessment of the status of technology development for different types of fuel cells in terms of applications to buses and offers estimates of market potential. Some fuel-cell powered buses are now available for demonstration purposes but the report concludes that truly commercial sales are unlikely to start before 2010 and widespread deployment is expected to take a further ten years after that. Buses have now slipped behind cars in terms of worldwide deployment. The issue of fuel choice is considered largely resolved with most fleet vehicle/bus manufacturers currently focussing on hydrogen as a fuel. A discussion of the prospects and barriers for fuel cell buses concludes that cost reduction is now the major barrier to the successful commercialisation of fuel cells in buses. More demonstration prototypes and field trials are required to provide information on energy, environmental and economic performance of fuel cell buses. Field trials could also provide information to assist the development of refuelling systems, fuel storage systems, stacks and other system components and to gain experience of building integrated fuel cell systems.

  2. The history of articulators: the "Articulator Wars" phenomenon with some circumstances leading up to it.

    Science.gov (United States)

    Starcke, Edgar N; Engelmeier, Robert L; Belles, Donald M

    2010-06-01

    At the dawn of the 20th century, all was not well with the practice of "plate prostheses." Removable prosthodontics had been degrading for several decades and was now generally in low esteem, even though there had been many significant advances. W. E. Walker had introduced adjustable condylar guides, George Snow, the facebow, and Carl Christensen, a method for clinically measuring the condylar inclines. Nevertheless, the average practicing dentist was still using simple hinge articulators and was apathetic to the deplorable state of the artificial teeth available; however, this was all going to change dramatically when two dentists, Alfred Gysi and J. Leon Williams, working together between 1910 and 1914, presented to the profession the "Trubyte Artificial Tooth System" that embodied both a typal system for selecting anterior teeth and new posterior occlusal carvings that made possible, for the first time, the articulation of artificial teeth. This incited many of prosthetic dentistry's elite to introduce their own theories of mandibular movement and the articulators that they designed to reflect those theories. The intense debates that ensued, both in the meeting halls and in the literature, were numerous and lasted for decades. At the time, the "Articulator Wars" had both positive and negative consequences. Today, with many of the "Articulator Wars" issues remaining as part of the practice of dentistry, the "Articulator Wars" can be considered a phenomenon of enlightenment.

  3. URBAN PUBLIC TRANSPORT WITH THE USE OF ELECTRIC BUSES – DEVELOPMENT TENDENCIES

    Directory of Open Access Journals (Sweden)

    Stanisław KRAWIEC

    2016-12-01

    Full Text Available The programing documents of the European Union determine the direction of transport systems development, including large cities and agglomerations. The context of these actions which aim to transform into ecologically clean and sustainable transport system is a significant reduction of greenhouse gas emissions. Assuming that public transport will significantly reduce the use of combustion-powered buses, studies on urban logistic enabling the use of electric buses for public transport are needed. The article presents the variants and scenarios for electric buses implementation in urban public transport, as well as the decision algorithm to support electric bus implementation based on technological, organisational, economic and ecological variables.

  4. Concentrations and risk assessment of selected monoaromatic hydrocarbons in buses and bus stations of Hangzhou, China.

    Science.gov (United States)

    Li, Shuang; Chen, Shuguang; Zhu, Lizhong; Chen, Xiasheng; Yao, Chaoying; Shen, Xueyou

    2009-03-01

    Air pollution surveys of ten selected monoaromatic hydrocarbons (MAHCs) were conducted in buses and bus stations in Hangzhou, China. The mean concentrations of MAHCs in the air of buses and bus stations were 95.9 and 36.5 microg/m(3), respectively, of which toluene was the highest in all the sampling sites. Mean concentrations of all MAHCs in buses were statistically higher than those nearby bus stations (pbus drivers were 1.11x10(-5) and 4.00x10(-5), respectively, which were way above the limit set by USEPA. The health risk caused by MAHCs in bus microenvironment should be cautioned.

  5. Generation of Articulated Mechanisms by Optimization Techniques

    DEFF Research Database (Denmark)

    Kawamoto, Atsushi

    2004-01-01

    optimization [Paper 2] 3. Branch and bound global optimization [Paper 3] 4. Path-generation problems [Paper 4] In terms of the objective of the articulated mechanism design problems, the first to third papers deal with maximization of output displacement, while the fourth paper solves prescribed path...... generation problems. From a mathematical programming point of view, the methods proposed in the first and third papers are categorized as deterministic global optimization, while those of the second and fourth papers are categorized as gradient-based local optimization. With respect to design variables, only...... directly affects the result of the associated sensitivity analysis. Another critical issue for mechanism design is the concept of mechanical degrees of freedom and this should be also considered for obtaining a proper articulated mechanism. The thesis treats this inherently discrete criterion in some...

  6. Automation and traction control of articulated vehicles

    OpenAIRE

    Andersson, Ulf

    2013-01-01

    Articulated machines such as load-haul-dump machines, wheel loaders and haulers operate in many different environments and driving conditions. In particular they need to be able to perform well with road conditions and loads that can change drastically, setting hard requirements on performances and robustness. The control challenges for off-road vehicles are hence quite different from standard cars or trucks, which mostly drive on regular roads. An important aspect characterising this is the ...

  7. Existence of equilibria in articulated bearings

    Science.gov (United States)

    Buscaglia, G.; Ciuperca, I.; Hafidi, I.; Jai, M.

    2007-04-01

    The existence of equilibrium solutions for a lubricated system consisting of an articulated body sliding over a flat plate is considered. Though this configuration is very common (it corresponds to the popular tilting-pad thrust bearings), the existence problem has only been addressed in extremely simplified cases, such as planar sliders of infinite width. Our results show the existence of at least one equilibrium for a quite general class of (nonplanar) slider shapes. We also extend previous results concerning planar sliders.

  8. Program Articulation: What It Is and What It Is Not.

    Science.gov (United States)

    Stevens, Barbara J.

    1981-01-01

    Discusses various elements of nursing education program articulation: politics, curriculum, core courses, philosophy, nursing theory, advantages and disadvantages of articulation, associate vs. baccalaureate degree programs, and program policies. (CT)

  9. Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses

    International Nuclear Information System (INIS)

    Barranco, Manuel; Proenza, Julián; Almeida, Luís

    2015-01-01

    Fieldbuses targeted to highly dependable distributed embedded systems are shifting from bus to star topologies. Surprisingly, despite the efforts into this direction, engineers lack of analyses that quantitatively characterize the system reliability achievable by buses and stars. Thus, to guide engineers in developing adequate bus and star fieldbuses, this work models, quantifies and compares the system reliability provided by simplex buses and stars for the case of the Controller Area Network (CAN). It clarifies how relevant dependability-related aspects affect reliability, refuting some intuitive ideas, and revealing some previously unknown bus and star benefits. - Highlights: • SANs models that quantify the reliability of simplex buses/stars in fieldbuses. • Models cover system relevant dependability-related features abstracted in the literature. • Results refute intuitive ideas about buses and stars and show some unexpected effects. • Models and results can guide the design of reliable simplex bus/stars fieldbuses

  10. Measurements of ultrafine particles and other vehicular pollutants inside school buses in South Texas

    Science.gov (United States)

    Zhang, Qunfang; Zhu, Yifang

    2010-01-01

    Increasing evidence has demonstrated toxic effects of vehicular emitted ultrafine particles (UFPs, diameter pollutants, especially UFPs, was measured inside four diesel-powered school buses. Two 1990 and two 2006 model year diesel-powered school buses were selected to represent the age extremes of school buses in service. Each bus was driven on two routine bus runs to study school children's exposure under different transportation conditions in South Texas. The number concentration and size distribution of UFPs, total particle number concentration, PM 2.5, PM 10, black carbon (BC), CO, and CO 2 levels were monitored inside the buses. The average total particle number concentrations observed inside the school buses ranged from 7.3 × 10 3 to 3.4 × 10 4 particles cm -3, depending on engine age and window position. When the windows were closed, the in-cabin air pollutants were more likely due to the school buses' self-pollution. The 1990 model year school buses demonstrated much higher air pollutant concentrations than the 2006 model year ones. When the windows were open, the majority of in-cabin air pollutants came from the outside roadway environment with similar pollutant levels observed regardless of engine ages. The highest average UFP concentration was observed at a bus transfer station where approximately 27 idling school buses were queued to load or unload students. Starting-up and idling generated higher air pollutant levels than the driving state. Higher in-cabin air pollutant concentrations were observed when more students were on board.

  11. Cool Science: K-12 Climate Change Art Displayed on Buses

    Science.gov (United States)

    Chen, R. F.; Lustick, D. S.; Lohmeier, J.; Thompson, S. R.

    2015-12-01

    Cool science is an art contest where K12 students create placards (7" x 22") to educate the public about climate change. Students are prompted to create their artwork in response to questions such as: What is the evidence for climate change? How does climate change impact your local community? What can you do to reduce the impacts of climate change? In each of three years, 500-600 student entrees have been submitted from more than 12 school districts across Massachusetts. A panel of judges including scientists, artists, rapid transit representatives, and educators chooses elementary, middle, and high school winners. Winners (6), runners-up (6), and honorable mentions (12) and their families and teachers are invited to an annual Cool Science Award Ceremony to be recognized and view winning artwork. All winning artwork is posted on the Cool Science website. The winning artwork (2 per grade band) is converted into placards (11" x 28") and posters (2.5' x 12') that are placed on the inside (placards) and outside (posters) of buses. Posters are displayed for one month. So far, Cool Science was implemented in Lowell, MA where over 5000 public viewers see the posters daily on the sides of Lowell Rapid Transit Authority (LRTA) buses, making approximately 1,000,000 impressions per year. Cool Science acts to increase climate literacy in children as well as the public, and as such promotes intergenerational learning. Using art in conjunction with science learning about climate change appears to be effective at engaging not just traditionally high achieving science students, but also those interested in the creative arts. Hearing winners' stories about how they created their artwork and what this contest meant to them supports the idea that Cool Science attracts a wide diversity of students. Parents discuss climate change with their children. Multiple press releases announcing the winners further promotes the awareness of climate change throughout school districts and their

  12. COMPARISON OF PARALLEL AND SERIES HYBRID POWERTRAINS FOR TRANSIT BUS APPLICATION

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Zhiming [ORNL; Daw, C Stuart [ORNL; Smith, David E [ORNL; Jones, Perry T [ORNL; LaClair, Tim J [ORNL; Parks, II, James E [ORNL

    2016-01-01

    The fuel economy and emissions of both conventional and hybrid buses equipped with emissions aftertreatment were evaluated via computational simulation for six representative city bus drive cycles. Both series and parallel configurations for the hybrid case were studied. The simulation results indicate that series hybrid buses have the greatest overall advantage in fuel economy. The series and parallel hybrid buses were predicted to produce similar CO and HC tailpipe emissions but were also predicted to have reduced NOx tailpipe emissions compared to the conventional bus in higher speed cycles. For the New York bus cycle (NYBC), which has the lowest average speed among the cycles evaluated, the series bus tailpipe emissions were somewhat higher than they were for the conventional bus, while the parallel hybrid bus had significantly lower tailpipe emissions. All three bus powertrains were found to require periodic active DPF regeneration to maintain PM control. Plug-in operation of series hybrid buses appears to offer significant fuel economy benefits and is easily employed due to the relatively large battery capacity that is typical of the series hybrid configuration.

  13. Steering assistance for backing up articulated vehicles

    Directory of Open Access Journals (Sweden)

    Dieter Zoebel

    2003-10-01

    Full Text Available Articulated vehicles belong to the category of nonholonomous wheelers. Under the aspect of control theory they require a sophisticated handling. This corresponds to the experience of unexercised drivers, for instance maneuvering a car and its caravan into a parking box. In this context some adequate advice for the right steering movements would give an appreciable assistance. Here a visual assistance is proposed and realized. The decisive advice for the driver is derived from kinematic modeling. The system is designed to be integrated into standard cars and trucks. For testing purposes the actual system has been incorporated into an existing backing up simulator.

  14. Intermediate transport in Southeast Asia. [Carts, cycles, mini-buses

    Energy Technology Data Exchange (ETDEWEB)

    Meier, A.K.

    1977-06-01

    Traffic flows through the streets of Southeast Asian countries even though they are used for almost all aspects of human and animal existence. The carts, bicycles, tricycles, and motorcycles, motorized three-wheelers, mini-buses are the so-called intermediate-transport vehicles. It is upon this group of vehicles that a culture--constrained by its own unique economic, environmental, and technological factors--exerts its influence most directly toward the solution of the transport problem. Transportation fills more service roles in Southeast Asian cities than in Western cities. Communication facilities such as telephones and postal services are notoriously unreliable. The personal encounter is all important in social and business interactions in Southeast Asia. Each of the transport modes is examined in view of design and use in a number of specific cultural settings for the countries in Southeast Asia. Present use of intermediate transport in developed countries is discussed briefly, and its further development predicted--pointing out the health and conservation advantages. (MCW)

  15. CNG/diesel buses for Texas school districts

    International Nuclear Information System (INIS)

    Armstrong, J.H.

    1993-01-01

    At the present time, the preponderance of trucks, buses and other heavy duty vehicles are powered by diesel engines. The reasons for the change from gasoline to diesel engines are all basically economic, due to the longer life and lower operating costs of diesel engines, as compared to gasoline engines. This provides a compelling reason to continue to use these engines, even if powered by fuel other than diesel. A major strategy within the industry has been the various attempts to adapt diesel engines to alternative fuels. These conversions have been largely to either methanol or natural gas, with propane joining the race just recently. This strategy takes advantage of the remaining life of existing vehicles by converting engines rather than purchasing a new engine (and/or vehicle) designed for and dedicated to an alternate fuel. Although diesel engines have been converted to run on natural gas, there are substantial challenges that must be met. The following describes some of the technical approaches being used for diesel engine conversions

  16. An Articulated Inspection Arm for fusion purposes

    International Nuclear Information System (INIS)

    Villedieu, E.; Bruno, V.; Pastor, P.; Gargiulo, L.; Song, Y.T.; Cheng, Y.; Feng, H.; Liu, C.; Shi, S.S.

    2016-01-01

    Highlights: • Requirements for in vacuum tokamak inspection are presented. • Development of a prototype of the Articulated Inspection Arm is described. • The upgrade of the prototype to convert it into a fully operational device is detailed. • Future applications of inspection robots in the new fusion reactors is discussed. - Abstract: Fusion Tokamaks are complex machines which require special conditions for their operation, in particular, high vacuum inside the vessel and high temperature of the vessel walls. During plasma phases, the first wall components are highly stressed and a control is necessary in case of doubt about their condition. To be able to make safely such an inspection in a short period of time is a great advantage. The Articulated Inspection Arm (AIA) developed by the CEA provides the capability for fast inspections of the first wall overall surface keeping the vacuum and temperature conditions of the vessel. The robot prototype was validated in Tore Supra in 2008. In the frame of a joint laboratory, CEA/IRFM and ASIPP have decided to upgrade the existing AIA prototype to use it routinely in the EAST and WEST tokamaks. The robot has followed an important upgrade program in 2013 and 2014. The document presents the various upgrades made on the mechanics, the sensors, the electronics, the control station and the integration adaptation for the operation on EAST. From the AIA experience, thoughts for future inspection robots are given.

  17. An Articulated Inspection Arm for fusion purposes

    Energy Technology Data Exchange (ETDEWEB)

    Villedieu, E., E-mail: eric.villedieu@cea.fr [CEA-IRFM, 13108 Saint Paul lez Durance (France); Bruno, V.; Pastor, P.; Gargiulo, L. [CEA-IRFM, 13108 Saint Paul lez Durance (France); Song, Y.T.; Cheng, Y.; Feng, H. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Liu, C. [CEA-IRFM, 13108 Saint Paul lez Durance (France); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Shi, S.S. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2016-11-01

    Highlights: • Requirements for in vacuum tokamak inspection are presented. • Development of a prototype of the Articulated Inspection Arm is described. • The upgrade of the prototype to convert it into a fully operational device is detailed. • Future applications of inspection robots in the new fusion reactors is discussed. - Abstract: Fusion Tokamaks are complex machines which require special conditions for their operation, in particular, high vacuum inside the vessel and high temperature of the vessel walls. During plasma phases, the first wall components are highly stressed and a control is necessary in case of doubt about their condition. To be able to make safely such an inspection in a short period of time is a great advantage. The Articulated Inspection Arm (AIA) developed by the CEA provides the capability for fast inspections of the first wall overall surface keeping the vacuum and temperature conditions of the vessel. The robot prototype was validated in Tore Supra in 2008. In the frame of a joint laboratory, CEA/IRFM and ASIPP have decided to upgrade the existing AIA prototype to use it routinely in the EAST and WEST tokamaks. The robot has followed an important upgrade program in 2013 and 2014. The document presents the various upgrades made on the mechanics, the sensors, the electronics, the control station and the integration adaptation for the operation on EAST. From the AIA experience, thoughts for future inspection robots are given.

  18. Mass concentrations of BTEX inside air environment of buses in Changsha, China

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiaokai; Zhang, Guoqiang; Zhang, Quan [College of Civil Engineering, Hunan University, Changsha 410082, Hunan (China); Chen, Hong [College of Environmental Science and Engineering, Hunan University, Changsha 410082, Hunan (China)

    2011-02-15

    In order to estimate the mass concentrations of benzene (B), toluene (T), ethylbenzene (E) and xylenes (X) inside air environment of buses and to analyze the influencing factors of the BTEX pollution levels, 22 public buses were investigated in Changsha, China. The interior air was collected through activated charcoal adsorption tubes and then the air samples were analyzed with thermally desorbed gas chromatograph. The mass concentrations ranged from 21.3 to 106.4 {mu}g/m{sup 3} for benzene, from 53.5 to 266.0 {mu}g/m{sup 3} for toluene, from 19.6 to 95.9 {mu}g/m{sup 3} for ethylbenzene and from 46.9 to 234.8 {mu}g/m{sup 3} for xylenes. Their mean values were 68.7, 179.7, 62.5 and 151.8 {mu}g/m{sup 3}, respectively. The rates of buses tested where the interior concentrations exceeded the limit levels of Chinese Indoor Air Quality Standard were 45.5% for toluene and 13.6% for xylenes. The BTEX levels increased when in-car temperature or relative humidity rose, and decreased when car age or travel distance increased. The BTEX concentrations were higher in leather trims buses than in non-leather trims ones, in air-conditioned buses than in non-air-conditioned ones, and in high-grade buses than in low-grade ones. According to the analysis of multiple linear regression equation, car age and in-car temperature were two most important factors influencing the BTEX pollution levels in the cabins of public buses. (author)

  19. Evaluation of Alternative Field Buses for Lighting ControlApplications

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Ed; Rubinstein, Francis

    2005-03-21

    The Subcontract Statement of Work consists of two major tasks. This report is the Final Report in fulfillment of the contract deliverable for Task 1. The purpose of Task 1 was to evaluate existing and emerging protocols and standards for interfacing sensors and controllers for communicating with integrated lighting control systems in commercial buildings. The detailed task description follows: Task 1. Evaluate alternative sensor/field buses. The objective of this task is to evaluate existing and emerging standards for interfacing sensors and controllers for communicating with integrated lighting control systems in commercial buildings. The protocols to be evaluated will include at least: (1) 1-Wire Net, (2) DALI, (3) MODBUS (or appropriate substitute such as EIB) and (4) ZigBee. The evaluation will include a comparative matrix for comparing the technical performance features of the different alternative systems. The performance features to be considered include: (1) directionality and network speed, (2) error control, (3) latency times, (4) allowable cable voltage drop, (5) topology, and (6) polarization. Specifically, Subcontractor will: (1) Analyze the proposed network architecture and identify potential problems that may require further research and specification. (2) Help identify and specify additional software and hardware components that may be required for the communications network to operate properly. (3) Identify areas of the architecture that can benefit from existing standards and technology and enumerate those standards and technologies. (4) Identify existing companies that may have relevant technology that can be applied to this research. (5) Help determine if new standards or technologies need to be developed.

  20. Characterizing ultrafine particles and other air pollutants in and around school buses.

    Science.gov (United States)

    Zhu, Yifang; Zhang, Qunfang

    2014-03-01

    Increasing evidence has demonstrated toxic effects of ultrafine particles (UFP*, diameter emissions from idling school buses to air pollutant levels in and around school buses under different scenarios; 3. Retrofit tests to evaluate the performance of two retrofit systems, a diesel oxidation catalyst (DOC) muffler and a crankcase filtration system (CFS), on reducing tailpipe emissions and in-cabin air pollutant concentrations under idling and driving conditions; and 4. High efficiency particulate air (HEPA) filter air purifier tests to evaluate the effectiveness of in-cabin filtration. In total, 24 school buses were employed to cover a wide range of school buses commonly used in the United States. Real-time air quality measurements included particle number concentration (PNC), fine and UFP size distribution in the size range 7.6-289 nm, PM2.5 mass concentration, black carbon (BC) concentration, and carbon monoxide (CO) and carbon dioxide (CO2) concentrations. For in-cabin measurements, instruments were placed on a platform secured to the rear seats inside the school buses. For all other tests, a second set of instruments was deployed to simultaneously measure the ambient air pollutant levels. For tailpipe emission measurements, the exhaust was diluted and then measured by instruments identical to those used for the in-cabin measurements. The results show that when driving on roads, in-cabin PNC, fine and UFP size distribution, PM2.5, BC, and CO varied by engine age, window position, driving speed, driving route, and operating conditions. Emissions from idling school buses increased the PNC close to the tailpipe by a factor of up to 26.0. Under some circumstances, tailpipe emissions of idling school buses increased the in-cabin PNC by factors ranging from 1.2 to 5.8 in the 10-30 nm particle size range. Retrofit systems significantly reduced the tailpipe emissions of idling school buses. With both DOC and CFS installed, PNC in tailpipe emissions dropped by 20

  1. Methicillin-resistant Staphylococcus aureus in public transportation vehicles (buses): another piece to the epidemiologic puzzle.

    Science.gov (United States)

    Lutz, Jonathan K; van Balen, Joany; Crawford, John Mac; Wilkins, John R; Lee, Jiyoung; Nava-Hoet, Rocio C; Hoet, Armando E

    2014-12-01

    Little is known about the occurrence and epidemiology of methicillin-resistant Staphylococcus aureus (MRSA) in public transportation in the United States. This research sought to determine the background prevalence and phenotypic and genotypic characteristics of MRSA strains circulating on buses from a large, metropolitan transportation agency. Electrostatic wipes were used to collect 237 surface samples from 40 buses randomly selected from July-October 2010. Six samples were collected from each bus immediately postservice and before any cleaning and disinfection. Positive isolates were analyzed for antibiotic resistance, staphylococcal cassette chromosome mec (SCCmec) type, and pulsed-field gel electrophoresis; and potential epidemiologic factors were examined. Of the buses, 68% (27/40) were contaminated with S aureus, and 63% (25/40) were contaminated with MRSA. Seats and seat rails were the surfaces most frequently contaminated, followed by the back door and stanchions. Most (62.9%) of the MRSA isolates were classified as community-associated MRSA clones (SCCmec type IV), and 22.9% were health care-associated MRSA clones (SCCmec type II). Of the MRSA strains, 65% (5/20) were multidrug resistant. MRSA was frequently isolated from commonly touched surfaces in buses serving both hospital and community routes. Phenotypic and genotypic analysis demonstrated that buses may be effective mixing vessels for MRSA strains of both community and health care-associated origin. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  2. CONSIDERATIONS UPON CONTACT STRESS MODELLING IN DENTAL ARTICULATOR PAIRS

    Directory of Open Access Journals (Sweden)

    Carmen Ciornei

    2012-05-01

    Full Text Available A dental articulator is a mechanism which simulates the temporo-mandibular joint. The articulator is essential as it replicates the basic motions of the upper and lower mandibles, both revolve and translational motions. In the present paper the stresses from an articulator TMJ modelled as a bronze sphere into a cylindrical steel cavity are analyzed by two methods, first applying the Hertzian contact theory and then numerically, by means of finite element analysis using the simulation module in CATIA.

  3. The Role of Virtual Articulator in Prosthetic and Restorative Dentistry

    Science.gov (United States)

    Aljanakh, Mohammad

    2014-01-01

    Virtual reality is a computer based technology linked with the future of dentistry and dental practice. The virtual articulator is one such application in prosthetic and restorative dentistry based on virtual reality that will significantly reduce the limitations of the mechanical articulator, and by simulation of real patient data, allow analyses with regard to static and dynamic occlusion as well as to jaw relation. It is the purpose of this article to present the concepts and strategies for a future replacement of the mechanical articulator by a virtual one. Also, a brief note on virtual reality haptic system has been highlighted along with newly developed touch enabled virtual articulator. PMID:25177664

  4. Microbial air quality in mass transport buses and work-related illness among bus drivers of Bangkok Mass Transit Authority.

    Science.gov (United States)

    Luksamijarulkul, Pipat; Sundhiyodhin, Viboonsri; Luksamijarulkul, Soavalug; Kaewboonchoo, Orawan

    2004-06-01

    The air quality in mass transport buses, especially air-conditioned buses may affect bus drivers who work full time. Bus numbers 16, 63, 67 and 166 of the Seventh Bus Zone of Bangkok Mass Transit Authority were randomly selected to investigate for microbial air quality. Nine air-conditioned buses and 2-4 open-air buses for each number of the bus (36 air-conditioned buses and 12 open-air buses) were included. Five points of in-bus air samples in each studied bus were collected by using the Millipore A ir Tester Totally, 180 and 60 air samples collected from air-conditioned buses and open-air buses were cultured for bacterial and fungal counts. The bus drivers who drove the studied buses were interviewed towards histories of work-related illness while working. The results revealed that the mean +/- SD of bacterial counts in the studied open-air buses ranged from 358.50 +/- 146.66 CFU/m3 to 506 +/- 137.62 CFU/m3; bus number 16 had the highest level. As well as the mean +/- SD of fungal counts which ranged from 93.33 +/- 44.83 CFU/m3 to 302 +/- 294.65 CFU/m3; bus number 166 had the highest level. Whereas, the mean +/- SD of bacterial counts in the studied air-conditioned buses ranged from 115.24 +/- 136.01 CFU/m3 to 244.69 +/- 234.85 CFU/m3; bus numbers 16 and 67 had the highest level. As well as the mean +/- SD of fungal counts which rangedfrom 18.84 +/- 39.42 CFU/m3 to 96.13 +/- 234.76 CFU/m3; bus number 166 had the highest level. When 180 and 60 studied air samples were analyzed in detail, it was found that 33.33% of the air samples from open-air buses and 6.11% of air samples from air-conditioned buses had a high level of bacterial counts (> 500 CFU/m3) while 6.67% of air samples from open-air buses and 2.78% of air samples from air-conditioned buses had a high level of fungal counts (> 500 CFU/m3). Data from the history of work-related illnesses among the studied bus drivers showed that 91.67% of open-air bus drivers and 57.28% of air-conditioned bus drivers had

  5. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2010

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.; Gigakis, C.

    2010-11-01

    This status report, fourth in a series of annual status reports from the U.S. Department of Energy's National Renewable Energy Laboratory, summarizes progress and accomplishments from demonstrations of fuel cell transit buses in the United States. This year's assessment report provides the results from the fifth year of operation of five Van Hool, ISE, and UTC Power fuel cell buses operating at AC Transit, SunLine, and CTTRANSIT. The achievements and challenges of this bus design, implementation, and operating are presented, with a focus on the next steps for implementing larger numbers and new and different designs of fuel cell buses. The major positive result from nearly five years of operation is the dramatic increase in reliability experienced for the fuel cell power system.

  6. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2011

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.; Gikakis, C.

    2011-11-01

    This status report, fifth in a series of annual status reports from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL), discusses the achievements and challenges of fuel cell propulsion for transit and summarizes the introduction of fuel cell transit buses in the United States. Progress this year includes an increase in the number of fuel cell electric buses (FCEBs), from 15 to 25, operating at eight transit agencies, as well as increased diversity of the fuel cell design options for transit buses. The report also provides an analysis of the combined results from fuel cell transit bus demonstrations evaluated by NREL with a focus on the most recent data through July 2011 including fuel cell power system reliability and durability; fuel economy; roadcall; and hydrogen fueling results. These evaluations cover 22 of the 25 FCEBs currently operating.

  7. Bacterial Quality of Drinking Water in Bushehr Intercity Buses in 2010

    Directory of Open Access Journals (Sweden)

    Dariush Ranjbar Vakilabadi

    2012-12-01

    Full Text Available Background and Objective: Road transportation and specifically bus travel accounts for the bulk of travel. Contaminated drinking water consumption is one of the issues that threaten health, and always there is pollution possibility in drinking water in buses. This study evaluated the microbial quality of consumed drinking water in buses and also compared it with available standards. Materials and Methods: This study is a cross-sectional study. By considering similar studies, 95% confidence interval and based on the samples size formula for tradition of proportion, 80 buses from 122 buses that entered Bushehr Passenger Depot from other cities or exited it were randomly selected. Over a three-month period, samples were taken from drinking water in these buses. Temperature, pH, residual chlorine, total coliform (TC, and fecal coliform (E. coli in each sample were measured in accordance with the standard method. Statistical analysis of the data was carried out with SPSS Version 16, and the t-test was performed for statistical difference. Results: The results showed that residual chlorine in 97.5% was zero and pH values of the samples were in the range of 6.8-8.7. TC and E. coli numbers in 12.5% and 8.8% of the samples were higher than those of standards, respectively. Conclusion: Use of ice, washing time of the drinking water tank (daily or weekly, and method of usage and storage of drinking water (with 20-liter tanks had significant effects on the bacterial loads of the drinking water in the tanks (p value <0.05. Some factors such as tank material, driver's education and age, type and model of the bus, filling time of the tank (daily or weekly, the method of filling and emptying the tank (complete clearing out of the tank or otherwise, and distance had no significant effect on the quality of the drinking water in the buses.

  8. COMPARATIVE STUDY ON EXHAUST EMISSIONS FROM DIESEL- AND CNG-POWERED URBAN BUSES

    Energy Technology Data Exchange (ETDEWEB)

    COROLLER, P; PLASSAT, G

    2003-08-24

    Couple years ago, ADEME engaged programs dedicated to the urban buses exhaust emissions studies. The measures associated with the reduction of atmospheric and noise pollution has particular importance in the sector of urban buses. In many cases, they illustrate the city's environmental image and contribute to reinforcing the attractiveness of public transport. France's fleet in service, presently put at about 14,000 units, consumes about 2 per cent of the total energy of city transport. It causes about 2 per cent of the HC emissions and from 4 to 6 per cent of the NOx emissions and particles. These vehicles typically have a long life span (about 15 years) and are relatively expensive to buy, about 150.000 euros per unit. Several technical solutions were evaluated to quantify, on a real condition cycle for buses, on one hand pollutants emissions, fuel consumption and on the other hand reliability, cost in real existing fleet. This paper presents main preliminary results on urban buses exhaust emission on two different cases: - existing Diesel buses, with fuel modifications (Diesel with low sulphur content), Diesel with water emulsion and bio-Diesel (30% oil ester in standard Diesel fuel); renovating CNG powered Euro II buses fleet, over representative driving cycles, set up by ADEME and partners. On these cycles, pollutants (regulated and unregulated) were measured as well as fuel consumption, at the beginning of a program and one year after to quantify reliability and increase/decrease of pollutants emissions. At the same time, some after-treatment technologies were tested under real conditions and several vehicles. Information such as fuel consumption, lubricant analysis, problem on the technology were following during a one year program. On the overall level, it is the combination of various action, pollution-reduction and renewal that will make it possible to meet the technological challenge of reducing emissions and fuel consumption by urban bus

  9. Multistage Mechanical Transmissions with Automatic Control for Advanced Trucks and Buses

    Directory of Open Access Journals (Sweden)

    Blokhin Aleksandr

    2017-12-01

    Full Text Available The study considers the basic trends of development of modern mechanical transmissions of trucks and buses. It provides the developed various series of multispeed transmissions with automatic control and a number of transmissions from 6 to 16 for trucks and buses. The paper shows the basic parameters of the standard series of new transmissions received on the basis of innovative technical solutions. It provides the results of experimental studies of 16-speed transmissions on a special test stand and on the road as part of a truck transmission. Theoretical and experimental data on the gear change time are compared.

  10. Parkinson Disease Detection from Speech Articulation Neuromechanics

    Directory of Open Access Journals (Sweden)

    Pedro Gómez-Vilda

    2017-08-01

    Full Text Available Aim: The research described is intended to give a description of articulation dynamics as a correlate of the kinematic behavior of the jaw-tongue biomechanical system, encoded as a probability distribution of an absolute joint velocity. This distribution may be used in detecting and grading speech from patients affected by neurodegenerative illnesses, as Parkinson Disease.Hypothesis: The work hypothesis is that the probability density function of the absolute joint velocity includes information on the stability of phonation when applied to sustained vowels, as well as on fluency if applied to connected speech.Methods: A dataset of sustained vowels recorded from Parkinson Disease patients is contrasted with similar recordings from normative subjects. The probability distribution of the absolute kinematic velocity of the jaw-tongue system is extracted from each utterance. A Random Least Squares Feed-Forward Network (RLSFN has been used as a binary classifier working on the pathological and normative datasets in a leave-one-out strategy. Monte Carlo simulations have been conducted to estimate the influence of the stochastic nature of the classifier. Two datasets for each gender were tested (males and females including 26 normative and 53 pathological subjects in the male set, and 25 normative and 38 pathological in the female set.Results: Male and female data subsets were tested in single runs, yielding equal error rates under 0.6% (Accuracy over 99.4%. Due to the stochastic nature of each experiment, Monte Carlo runs were conducted to test the reliability of the methodology. The average detection results after 200 Montecarlo runs of a 200 hyperplane hidden layer RLSFN are given in terms of Sensitivity (males: 0.9946, females: 0.9942, Specificity (males: 0.9944, females: 0.9941 and Accuracy (males: 0.9945, females: 0.9942. The area under the ROC curve is 0.9947 (males and 0.9945 (females. The equal error rate is 0.0054 (males and 0.0057 (females

  11. Wayside charging and hydrogen hybrid bus : extending the range of electric shuttle buses.

    Science.gov (United States)

    2012-09-30

    This report documents the results completed by the Center for Energy, Transportation and the Environment (CETE) at the University of Tennessee at Chattanooga (UTC) under Federal Transit Administration Cooperative Agreement TN-26-7034. This research h...

  12. Perceived Articulation Uniformity between Trumpet and Violin Performances

    Science.gov (United States)

    Cooper, Shelly C.; Hamann, Donald L.

    2010-01-01

    Directors strive for a unified sound throughout their wind and orchestra ensembles. Articulation affects sound uniformity among winds and strings. This baseline study examined whether a trumpet player could better match a violin player's articulation, as perceived by participants listening to a recording of two performances, when: (a) performing…

  13. Phonological Awareness Training with Articulation Promotes Early Reading Development

    Science.gov (United States)

    Fälth, Linda; Gustafson, S.; Svensson, I.

    2017-01-01

    In a longitudinal intervention study, the effects of phonological training with articulation for children in a preschool class were analyzed. In total, 69 students participated, divided into an experimental group of 39 and a comparison group of 30 students. The intervention consisted of phonological training with articulation and lasted throughout…

  14. The Oklahoma PN/ADN Articulation Project Report.

    Science.gov (United States)

    Oklahoma State Regents for Higher Education, Oklahoma City.

    In response to a critical nursing shortage in the state of Oklahoma, the Oklahoma Practical Nursing (PN)/Associate Degree Nursing (ADN) Articulation Project Coordinating Committee was formed in spring 1990 to develop a proposal for program articulation. A curriculum matrix was designed and adopted for use by five regional subcommittees which…

  15. Articulating nursing in an interprofessional world.

    Science.gov (United States)

    Sommerfeldt, Susan C

    2013-11-01

    It is essential that nurses in practice clearly articulate their role in interprofessional clinical settings. Assumptions, stereotypes, power differentials and miscommunication can complicate the interaction of healthcare professionals when clarity does not exist about nurses' knowledge, skills and roles. Conflicting views among nurse scholars as to the nature of nursing knowledge and its relationship to practice complicate the task of nurses in explaining their performance and role to others in interprofessional environments. Interprofessionality is potentially misunderstood by nurse leaders, practitioners and educators, isolating nurses in an increasingly inter-disciplinary healthcare system. The theorization of contemporary nursing is explored through the views and perspectives of current nurse scholars. The ability to explain nursing knowledge, skills and roles to others in interprofessional interactions is a nursing competency, as well as an interprofessional one. Nurses, nurse leaders and nurse educators are challenged to engage in interprofessionalism so as to have an influence in the evolution of healthcare education and practice environments. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Component for articulated offshore loading towers

    Energy Technology Data Exchange (ETDEWEB)

    Backhaus, H.

    1980-09-01

    The construction of offshore natural gas liquefaction plants must be regarded as technically feasible and the marketing prospects for LNG - a source of clean burning energy - appear excellent. Nevertheless, the optimum loading procedure for LNG tankers in the - sometimes adverse - offshore environment is still a matter under discussion by the experts - with a tendency to adopt and adapt well-proven components from the offshore crude oil sector. Here, articulated towers are in use for tankerloading and the crude oil is pumped at ambient temperature through the cardan joint of the tower itself. In the case of the cryogenic liquid LNG, this method would entail intolerable risks. Leaks and subsequent LNG spills within the tower joint will cause low temperature-embrittlement and most likely damage the cardan connection at the tower's base plate on the sea bed. The described submarine joint for ultra-cold liquids, which has the same cardanic properties as the cardan joint of the tower is completely separated from the latter. Thus a cryogenic leakage in this submarine joint will under no circumstance reach and affect the tower cardan.

  17. Concentrations of volatile organic compounds, carbon monoxide, carbon dioxide and particulate matter in buses on highways in Taiwan

    Science.gov (United States)

    Hsu, Der-Jen; Huang, Hsiao-Lin

    2009-12-01

    Although airborne pollutants in urban buses have been studied in many cities globally, long-distance buses running mainly on highways have not been addressed in this regard. This study investigates the levels of volatile organic compounds (VOCs), carbon monoxide (CO), carbon dioxide (CO 2) and particulate matter (PM) in the long-distance buses in Taiwan. Analytical results indicate that pollutants levels in long-distance buses are generally lower than those in urban buses. This finding is attributable to the driving speed and patterns of long-distance buses, as well as the meteorological and geographical features of the highway surroundings. The levels of benzene, toluene, ethylbenzene and xylene (BTEX) found in bus cabins exceed the proposed indoor VOC guidelines for aromatic compounds, and are likely attributable to the interior trim in the cabins. The overall average CO level is 2.3 ppm, with higher average level on local streets (2.9 ppm) than on highways (2.2 ppm). The average CO 2 level is 1493 ppm, which is higher than the guideline for non-industrial occupied settings. The average PM level in this study is lower than those in urban buses and IAQ guidelines set by Taiwan EPA. However, the average PM 10 and PM 2.5 is higher than the level set by WHO. Besides the probable causes mentioned above, fewer passenger movements and less particle re-suspension from bus floor might also cause the lower PM levels. Measurements of particle size distribution reveal that more than 75% of particles are in submicron and smaller sizes. These particles may come from the infiltration from the outdoor air. This study concludes that air exchange rates in long-distance buses should be increased in order to reduce CO 2 levels. Future research on long-distance buses should focus on the emission of VOCs from brand new buses, and the sources of submicron particles in bus cabins.

  18. Hybrid Electric Transit Bus

    Science.gov (United States)

    Viterna, Larry A.

    1997-01-01

    A government, industry, and university cooperative is developing an advanced hybrid electric city transit bus. Goals of this effort include doubling the fuel economy compared to current buses and reducing emissions to one-tenth of current EPA standards. Unique aspects of the vehicle's power system include the use of ultra-capacitors as an energy storage system, and a planned natural gas fueled turbogenerator developed from a small jet engine. Power from both the generator and energy storage system is provided to a variable speed electric motor attached to the rear axle. At over 15000 kg gross weight, this is the largest vehicle of its kind ever built using ultra-capacitor energy storage. This paper describes the overall power system architecture, the evolution of the control strategy, and its performance over industry standard drive cycles.

  19. Carbon Dioxide Concentrations and Temperatures within Tour Buses under Real-Time Traffic Conditions.

    Science.gov (United States)

    Chiu, Chun-Fu; Chen, Ming-Hung; Chang, Feng-Hsiang

    2015-01-01

    This study monitored the carbon dioxide (CO2) concentrations and temperatures of three 43-seat tour buses with high-passenger capacities in a course of a three-day, two-night school excursion. Results showed that both driver zones and passenger zones of the tour buses achieved maximum CO2 concentrations of more than 3000 ppm, and maximum daily average concentrations of 2510.6 and 2646.9 ppm, respectively. The findings confirmed that the CO2 concentrations detected in the tour buses exceeded the indoor air quality standard of Taiwan Environmental Protection Administration (8 hr-CO2: 1000 ppm) and the air quality guideline of Hong Kong Environmental Protection Department (1 hr-CO2: 2500 ppm for Level 1 for buses). Observations also showed that high-capacity tour bus cabins with air conditioning system operating in recirculation mode are severely lacking in air exchange rate, which may negatively impact transportation safety. Moreover, the passenger zones were able to maintain a temperature of between 20 and 25°C during travel, which effectively suppresses the dispersion of volatile organic compounds. Finally, the authors suggest that in the journey, increasing the ventilation frequency of tour bus cabin, which is very beneficial to maintain the travel safety and enhance the quality of travel.

  20. Transportation of Wheelchair Seated Students in School Buses: A Review of State Policy

    Science.gov (United States)

    Moore, Britta; Fuhrman, Susan; Karg, Patricia

    2010-01-01

    This study quantitatively reviews publicly available state policies as they relate to the transportation of wheelchair-seated students in school buses. Inclusion of best practices in specially equipped school bus and driver training policies was assessed. Key points of interest within state policies were identified based on site visits, common…

  1. Alternative Fuels for Washington's School Buses: A Report to the Washington State Legislature.

    Science.gov (United States)

    Lyons, John Kim; McCoy, Gilbert A.

    This document presents findings of a study that evaluated the use of both propane and compressed natural gas as alternative fuels for Washington State school buses. It discusses air quality improvement actions by state- and federal-level regulators and summarizes vehicle design, development, and commercialization activities by all major engine,…

  2. 76 FR 77888 - Student Transportation of America, Inc.-Control-Dairyland Buses, Inc.

    Science.gov (United States)

    2011-12-14

    ... Wisconsin law, also holds a FMCSA license (MC-170747) and is owned by Coach USA, Inc., a Delaware..., 2011, from their current owner, Coach USA, Inc., into an independent voting trust established under 49... Transportation of America, Inc.--Control--Dairyland Buses, Inc. AGENCY: Surface Transportation Board. ACTION...

  3. Battery Peak Power Shaving Strategy to Prolong Battery Life for Electric Buses

    NARCIS (Netherlands)

    Pham, T.H.; Rosea, B.; Wilkins, S.

    2016-01-01

    This paper presents a battery peak power shaving strategy for battery electric buses. The developed strategy restricts the battery charge/discharge power when the propulsion power demand is high to avoid high deterioration of the battery capacity during operation. Without reducing the propulsion

  4. Carbon Dioxide Concentrations and Temperatures within Tour Buses under Real-Time Traffic Conditions

    Science.gov (United States)

    Chiu, Chun-Fu; Chen, Ming-Hung; Chang, Feng-Hsiang

    2015-01-01

    This study monitored the carbon dioxide (CO2) concentrations and temperatures of three 43-seat tour buses with high-passenger capacities in a course of a three-day, two-night school excursion. Results showed that both driver zones and passenger zones of the tour buses achieved maximum CO2 concentrations of more than 3000 ppm, and maximum daily average concentrations of 2510.6 and 2646.9 ppm, respectively. The findings confirmed that the CO2 concentrations detected in the tour buses exceeded the indoor air quality standard of Taiwan Environmental Protection Administration (8 hr-CO2: 1000 ppm) and the air quality guideline of Hong Kong Environmental Protection Department (1 hr-CO2: 2500 ppm for Level 1 for buses). Observations also showed that high-capacity tour bus cabins with air conditioning system operating in recirculation mode are severely lacking in air exchange rate, which may negatively impact transportation safety. Moreover, the passenger zones were able to maintain a temperature of between 20 and 25°C during travel, which effectively suppresses the dispersion of volatile organic compounds. Finally, the authors suggest that in the journey, increasing the ventilation frequency of tour bus cabin, which is very beneficial to maintain the travel safety and enhance the quality of travel. PMID:25923722

  5. Predicting self-pollution inside school buses using a CFD and multi-zone coupled model

    Science.gov (United States)

    Li, Fei; Lee, Eon S.; Liu, Junjie; Zhu, Yifang

    2015-04-01

    The in-cabin environment of a school bus is important for children's health. The pollutants from a bus's own exhaust contribute to children's overall exposure to air pollutants inside the school bus cabin. In this study, we adapted a coupled model originally developed for indoor environment to determine the relative contribution of the bus own exhaust to the in-cabin pollutant concentrations. The coupled model uses CFD (computational fluent dynamics) model to simulate outside concentration and CONTAM (a multi-zone model) for inside the school bus. The model was validated with experimental data in the literature. Using the validated model, we analyzed the effects of vehicle speed and tailpipe location on self-pollution inside the bus cabin. We confirmed that the pollution released from the tailpipe can penetrate into the bus cabin through gaps in the back emergency door. We found the pollution concentration inside school buses was the highest when buses were driven at a medium speed. In addition, locating the tailpipe on the side, behind the rear axle resulted in less self-pollution since there is less time for the suction effect to take place. The developed theoretical framework can be generalized to study other types of buses. These findings can be used in developing policy recommendations for reducing human exposure to air pollution inside buses.

  6. Demonstration of 3 buses fuelled with ethanol with ignition improver in the Netherlands

    NARCIS (Netherlands)

    Verweij, J.; Weide, J. van der; Nie, L.H. de; Bruin, A. de

    1996-01-01

    This three year demonstration programme was initiated by OBL, a subsidiary of two Dutch sugar companies, and GADO, a public transport company. The programme was financially supported by a regional governmental organisation (ISP). In this programme, three bio-ethanol fuelled buses accumulated more

  7. ARTICULATION DISORDERS IN SERBIAN LANGUAGE IN CHILDREN WITH SPEECH PATHOLOGY.

    Science.gov (United States)

    Dmitrić, Tanja; Veselinović, Mila; Mitrović, Slobodan M

    2015-01-01

    Articulation is the result of speech organs and it means clean, clear and distinct pronunciation of voices in words. A prospective study included 24 children between 5 and 15 years of age, of both sexes. All children were monolingual, Serbian being their native language. The quality of articulation was tested with Triage articulation test. Neither omission nor distortion of plosives was observed in any of them, whereas substitution of plosives occurred in 12% of patients. Omission of affricates was not observed in any of the subjects, but substitution and distortion occurred in 29%, and 76% of subjects, respectively. Omission of fricatives was found in 29% subjects, substitution in 52%, and distortion in 82% of subjects. Omission and distortion of nasals was not recorded in any of the subjects, and substitution occurred in 6% of children. Omission of laterals was observed in 6%, substitution in 46% and distortion in 52% of subjects with articulation disorders. Discussion and Articulation disorders were observed not only in children diagnosed with dyslalia but in those with dysphasia and stuttering as well. Children with speech disorders articulate vowels best, then nasals and plosives. Articulation of fricatives and laterals was found to be most severely deviated, including all three disorders, i.e. substitution, omission and distortion. Spasms of speech muscles and vegetative reactions were also observed in this study, but only in children with stuttering.

  8. Efficiency evaluation of gas fuelled and electric driven buses in the public transport sector

    Energy Technology Data Exchange (ETDEWEB)

    Aigner, Tobias Alexander

    2013-07-01

    The following report evaluates the efficiency of gas fuelled and electric driven buses in the public transport sector on a theoretical basis. The results indicate that the combination of CHP power plants and electric driven buses reach an overall efficiency of about 51% throughout the production chain (Well-to-Wheel), including heat distribution losses. The overall Well-to-Wheel efficiency for conventional gas turbines without heat recovery decreases to around 28%. For gas fuelled buses the Well-to-Wheel efficiency is about 30%. The Co2-emissions are evaluated based on the example of a #Left Double Quotation Mark#Volvo B10L CNG#Right Double Quotation Mark# gas bus and the electric driven #Left Double Quotation Mark#Eurabus 600#Right Double Quotation Mark#. The low energy consumption of the electric driven bus results in Co2-emissions of only 181.4 g Co2/km (Grid-to-Wheel). Depending on the utilised power plant technology the overall Co2-emissions (Well-to-Wheel) amount to 307.5 g Co2/km for a CHP power plant and 553.5 g Co2/km for a conventional gas turbine. On the other hand, gas fuelled buses emit about 1.25 kg Co2/km (Tank-to-Wheel), which is eightfold the emissions of an electrical bus. The Well-to-Tank emissions further increase to about 1.32 kg Co2/km. The emission calculation is based on real gas consumption data from a Norwegian public transport utility. The results indicate that the combination of CHP plants and electrical buses provide a much higher efficiency while reducing Co2-emissions. (author)

  9. Detection of maximum loadability limits and weak buses using Chaotic PSO considering security constraints

    International Nuclear Information System (INIS)

    Acharjee, P.; Mallick, S.; Thakur, S.S.; Ghoshal, S.P.

    2011-01-01

    Highlights: → The unique cost function is derived considering practical Security Constraints. → New innovative formulae of PSO parameters are developed for better performance. → The inclusion and implementation of chaos in PSO technique is original and unique. → Weak buses are identified where FACTS devices can be implemented. → The CPSO technique gives the best performance for all the IEEE standard test systems. - Abstract: In the current research chaotic search is used with the optimization technique for solving non-linear complicated power system problems because Chaos can overcome the local optima problem of optimization technique. Power system problem, more specifically voltage stability, is one of the practical examples of non-linear, complex, convex problems. Smart grid, restructured energy system and socio-economic development fetch various uncertain events in power systems and the level of uncertainty increases to a great extent day by day. In this context, analysis of voltage stability is essential. The efficient method to assess the voltage stability is maximum loadability limit (MLL). MLL problem is formulated as a maximization problem considering practical security constraints (SCs). Detection of weak buses is also important for the analysis of power system stability. Both MLL and weak buses are identified by PSO methods and FACTS devices can be applied to the detected weak buses for the improvement of stability. Three particle swarm optimization (PSO) techniques namely General PSO (GPSO), Adaptive PSO (APSO) and Chaotic PSO (CPSO) are presented for the comparative study with obtaining MLL and weak buses under different SCs. In APSO method, PSO-parameters are made adaptive with the problem and chaos is incorporated in CPSO method to obtain reliable convergence and better performances. All three methods are applied on standard IEEE 14 bus, 30 bus, 57 bus and 118 bus test systems to show their comparative computing effectiveness and

  10. In-vehicle measurement of ultrafine particles on compressed natural gas, conventional diesel, and oxidation-catalyst diesel heavy-duty transit buses.

    Science.gov (United States)

    Hammond, Davyda; Jones, Steven; Lalor, Melinda

    2007-02-01

    Many metropolitan transit authorities are considering upgrading transit bus fleets to decrease ambient criteria pollutant levels. Advancements in engine and fuel technology have lead to a generation of lower-emission buses in a variety of fuel types. Dynamometer tests show substantial reductions in particulate mass emissions for younger buses (vehicle particle number concentration measurements on conventional diesel, oxidation-catalyst diesel and compressed natural gas transit buses are compared to estimate relative in-vehicle particulate exposures. Two primary consistencies are observed from the data: the CNG buses have average particle count concentrations near the average concentrations for the oxidation-catalyst diesel buses, and the conventional diesel buses have average particle count concentrations approximately three to four times greater than the CNG buses. Particle number concentrations are also noticeably affected by bus idling behavior and ventilation options, such as, window position and air conditioning.

  11. Mapping Emplaced Articulated Concrete Mattress Using Geoelectrical and Electromagnetic Techniques

    National Research Council Canada - National Science Library

    Sjostrom, Keith

    1998-01-01

    Articulated concrete mattresses (ACM) are structures placed parallel to the river current for the purpose of stabilizing the concave banks in river bends, reduce the effects of erosion, and maintain the river channel...

  12. Design of a stable fuzzy controller for an articulated vehicle.

    Science.gov (United States)

    Tanaka, K; Kosaki, T

    1997-01-01

    This paper presents a backward movement control of an articulated vehicle via a model-based fuzzy control technique. A nonlinear dynamic model of the articulated vehicle is represented by a Takagi-Sugeno fuzzy model. The concept of parallel distributed compensation is employed to design a fuzzy controller from the Takagi-Sugeno fuzzy model of the articulated vehicle. Stability of the designed fuzzy control system is guaranteed via Lyapunov approach. The stability conditions are characterized in terms of linear matrix inequalities since the stability analysis is reduced to a problem of finding a common Lyapunov function for a set of Lyapunov inequalities. Simulation results and experimental results show that the designed fuzzy controller effectively achieves the backward movement control of the articulated vehicle.

  13. Articulating cultures: socio-cultural experiences of black female ...

    African Journals Online (AJOL)

    Articulating cultures: socio-cultural experiences of black female immigrant students in South African schools 1. ... Gender and Behaviour ... and worrisome issue is that of the erosion of the social and cultural mores of Black3 immigrant students.

  14. EXPERIMENTAL EVALUATION OF ARTICULATED WHEELED VEHICLES POSITION STABILITY

    Directory of Open Access Journals (Sweden)

    Ye. Dubinin

    2015-07-01

    Full Text Available With introducing a mobile measurement system with linear acceleration sensors there was experimentally determined the parameter of position stability of the articulated wheeled vehicle on the example of HTA-200 «Slobozhanets». It was determined that the position stability was provided within the entire range of operating speeds and accelerations. The obtained results can be used to enhance the traffic safety of articulated vehicles.

  15. From Mozart to MIDI : A Rule System for Expressive Articulation

    OpenAIRE

    Hähnel, Tilo

    2010-01-01

    The propriety of articulation, especially of notes that lackannotations, is influenced by the origin of the particularmusic. This paper presents a rule system for articulationderived from late Baroque and early Classic treatises on performance. Expressive articulation, in this respect, is understood as a combination of alterable tone features like duration, loudness, and timbre. The model differentiates globalcharacteristics and local particularities, provides a generalframework for human-lik...

  16. Planar articulated mechanism design by graph theoretical enumeration

    DEFF Research Database (Denmark)

    Kawamoto, A; Bendsøe, Martin P.; Sigmund, Ole

    2004-01-01

    This paper deals with design of articulated mechanisms using a truss-based ground-structure representation. By applying a graph theoretical enumeration approach we can perform an exhaustive analysis of all possible topologies for a test example for which we seek a symmetric mechanism. This guaran....... This guarantees that one can identify the global optimum solution. The result underlines the importance of mechanism topology and gives insight into the issues specific to articulated mechanism designs compared to compliant mechanism designs....

  17. Kinematics and Path Following Control of an Articulated Drum Roller

    Science.gov (United States)

    BIAN, Yongming; YANG, Meng; FANG, Xiaojun; WANG, Xiahui

    2017-07-01

    Automatic navigation of an articulated drum roller, which is an articulated steering type vehicle widely used in the construction industry, is highly expected for operation cost reduction and improvement of work efficiency. In order to achieve the path following control, considering that its steering system is articulated steering and two frames are articulated by an active revolute joint, a kinematic model and an error dynamic state-space equation of an articulated drum roller are proposed. Besides, a state-feedback control law based on Lyapunov stability theory is also designed, which can be proved to achieve the purpose of control by the analysis of stability. What's more, to evaluate the performance of the proposed method, simulation under the MATLAB/Simulink and experiments using positioning algorithm and errors correction at the uneven construction site are performed, with initial displacement error (-1.5 m), heading error (-0.11 rad) and steering angle (-0.19 rad). Finally, simulation and experimental results show that the errors and steering angle can decrease gradually, and converge to zero with time. Meanwhile, the control input is not saturated. An articulated drum roller can lock into a desired path with the proposed method in uneven fields.

  18. Hybrid platform. Economical hybrid drive for commercial vehicles; Hybrid Plattform. Wirtschaftlicher Hybridantrieb fuer Nutzfahrzeuge

    Energy Technology Data Exchange (ETDEWEB)

    Wallner, S.; Lamke, M.; Mohr, M.; Sedlacek, M.; Speck, F.D. [ZF Friedrichshafen AG, Friedrichshafen (Germany)

    2011-07-01

    Up to now, hybrid systems have been adapted to their specific requirements in the various applications for trucks, buses as well as mobile and building machines. From a technical point of view, this does indeed result in optimized hybrid drives for each single vehicle application, but due to small volumes, such single developments are critical from a business point of view. ZF Friedrichshafen AG is providing a solution to the technical and economical requirements of the cost-sensitive CV segment in the form of a modular CV parallel hybrid platform composed of a hybrid module system, an inverter, a battery system, and a hybrid software integrated into the overall vehicle. Thanks to the intelligent combination of assemblies and the use of as many identical parts as possible, platforms are realized which cover power ranges between 60 and 120 kW, voltage ranges between 350 and 650 V, and battery capacities between 2 and 4 kWh. The dimensions of the platform elements are such that integration into the diverse commercial vehicle applications is made easy. The hybrid software required for the vehicle-specific functions is also configurable for the mentioned CV applications. (orig.)

  19. Regenerative Braking System for Series Hybrid Electric City Bus

    OpenAIRE

    Zhang, Junzhi; Lu, Xin; Xue, Junliang; Li, Bos

    2008-01-01

    Regenerative Braking Systems (RBS) provide an efficient method to assist hybrid electric buses achieve better fuel economy while lowering exhaust emissions. This paper describes the design and testing of three regenerative braking systems, one of which is a series regenerative braking system and two of which are parallel regenerative braking systems. The existing friction based Adjustable Braking System (ABS) on the bus is integrated with each of the new braking systems in order to ensure bus...

  20. Characterization and speciation of fine particulate matter inside the public transport buses running on bio-diesel.

    Science.gov (United States)

    2009-09-01

    Air pollution with respect to particulate matter was investigated in Toledo, Ohio, USA, a : city of approximately 300,000, in 2009. Two study buses were selected to reflect typical : exposure conditions of passengers while traveling in the bus. Monit...

  1. Preliminary study on field buses for the control system of the high voltage of the ATLAS hadronic calorimeter

    International Nuclear Information System (INIS)

    Drevet, F.; Chadelas, R.; Montarou, G.

    1996-01-01

    We present here after a preliminary study on field buses for the control system of the high voltage of the photomultipliers of the TILECAL calorimeter. After some generalities, different commercial buses are reviewed (CAN, ARCET, WorldFIP, Profibus and LonWorks). The Profibus and LonWorks solution are more extensively studies as a possible solution for the high voltage system of the TILE hadronic calorimeter. (authors)

  2. School buses, air pollution and children's health: follow-up report

    Energy Technology Data Exchange (ETDEWEB)

    Perrotta, K. [Clean Air Partnership, Toronto, ON (Canada)], email: Kperrotta@cleanairpartnership.org

    2010-10-15

    This document is designed to be a follow-up report to the Ontario Public Health Association (OPHA) school bus report published in 2005, and was produced through a collaboration between the Clean Air Partnership and the OPHA. The level of awareness of school bus emissions are evaluated in this report. The document also provides a review of projects handled by the federal government, programs developed by governments of other provinces and the policies followed by school boards in other provinces, to mitigate emissions and exposures related to school buses. Several recommendations were made, including the replacement of older school buses, adapt the routes considering the emissions generated and promote the use of biodiesel to reduce emissions of air pollutants and greenhouse gases. 36 refs, 8 tabs.

  3. Hydrogen for buses in London: A scenario analysis of changes over time in refuelling infrastructure costs

    International Nuclear Information System (INIS)

    Shayegan, S.; Pearson, P.J.G.; Hart, D.

    2009-01-01

    The lack of a hydrogen refuelling infrastructure is one of the major obstacles to the introduction of the hydrogen vehicles to the road transport market. To help overcome this hurdle a likely transitional solution is to introduce hydrogen for niche applications such as buses or other types of fleet vehicles for which fuel demand is predictable and localised. This paper analyses the costs of different hydrogen production-delivery pathways, via a case study of buses in London. Scenario analysis over time (2007-2025) is used to investigate potential changes to the cost of hydrogen as a result of technology development, growing demand for hydrogen and changes in energy prices (gas and electricity). It is found that factors related to hydrogen demand have the greatest effect on the unit cost of hydrogen, while for the whole of the analysis period, on-site SMR (steam methane reforming) remains the least-cost production-delivery pathway. (author)

  4. School buses, air pollution and children's health: follow-up report

    International Nuclear Information System (INIS)

    Perrotta, K.

    2010-10-01

    This document is designed to be a follow-up report to the Ontario Public Health Association (OPHA) school bus report published in 2005, and was produced through a collaboration between the Clean Air Partnership and the OPHA. The level of awareness of school bus emissions are evaluated in this report. The document also provides a review of projects handled by the federal government, programs developed by governments of other provinces and the policies followed by school boards in other provinces, to mitigate emissions and exposures related to school buses. Several recommendations were made, including the replacement of older school buses, adapt the routes considering the emissions generated and promote the use of biodiesel to reduce emissions of air pollutants and greenhouse gases. 36 refs, 8 tabs.

  5. From prototype to product. The development of low emission natural gas- and biogas buses

    Energy Technology Data Exchange (ETDEWEB)

    Ekelund, M. [Strateco Development AB, Haninge (Sweden)

    1998-01-01

    The objective of this report is to show the development of natural gas and bio gas buses and trucks since the termination of the `Co-Nordic GasBus Project`, to which KFB was a major contributor and one of the initiators. Sweden have some 325 heavy duty methane vehicles of which almost 100 are bio gas operated. Scania and Volvo have produced, or have orders for, 500 gas buses to 6 different countries since 1990. The Project objectives were obtained and the significantly reduced emission levels aimed for, were shown. The international bus manufacturing industry followed, and have since shown the same low levels of emissions from gas bus engines. Sweden has taken the lead in the use of bio gas, by operating nearly 100 buses and trucks. Bio gas is still an underestimated fuel when it comes to supply, as it can provide fuel for 50% of the domestic use of diesel oil. Future development need to include control systems for more stable emissions, lower weight cylinders, less costly compressors, cleaning equipment and storage cylinders as well as more fuel efficient engines that can reduce mainly the discharge of CO2, NOx and CH4 further. Societal costs, regardless of who pays, for methane operated buses is still somewhat higher compared with best use of diesel + CRT technology. As commercialization develops, it is expected that the price of the vehicle will be reduced and emissions improved. It is therefore expected that the stake holders costs will be lower then that of diesel technology in the future

  6. Diesel vs. compressed natural gas for school buses: a cost-effectiveness evaluation of alternative fuels

    International Nuclear Information System (INIS)

    Cohen, J.T.

    2005-01-01

    Reducing emissions from school buses is a priority for both state and federal regulators. Two popular alternative technologies to conventional diesel (CD) are emission controlled diesel (ECD), defined here to be diesel buses equipped with continuously regenerating particle filters, and engines fueled by compressed natural gas (CNG). This paper uses a previously published model to quantify the impact of particulate matter (PM), oxides of nitrogen (NO x ), and sulfur dioxide (SO 2 ) emissions on population exposure to ozone and to primary and secondary PM, and to quantify the resulting health damages, expressed in terms of lost quality adjusted life years (QALYs). Resource costs include damages from greenhouse gas-induced climate change, vehicle procurement, infrastructure development, and operations. I find that ECD and CNG produce very similar reductions in health damages compared to CD, although CNG has a modest edge because it may have lower NO x emissions. However, ECD is far more cost effective ($400,000-900,000 cost per QALY saved) than CNG (around $4 million per QALY saved). The results are uncertain because the model used makes a series of simplifying assumptions and because emissions data and cost data for school buses are very limited

  7. Developing a discrete event simulation model for university student shuttle buses

    Science.gov (United States)

    Zulkepli, Jafri; Khalid, Ruzelan; Nawawi, Mohd Kamal Mohd; Hamid, Muhammad Hafizan

    2017-11-01

    Providing shuttle buses for university students to attend their classes is crucial, especially when their number is large and the distances between their classes and residential halls are far. These factors, in addition to the non-optimal current bus services, typically require the students to wait longer which eventually opens a space for them to complain. To considerably reduce the waiting time, providing the optimal number of buses to transport them from location to location and the effective route schedules to fulfil the students' demand at relevant time ranges are thus important. The optimal bus number and schedules are to be determined and tested using a flexible decision platform. This paper thus models the current services of student shuttle buses in a university using a Discrete Event Simulation approach. The model can flexibly simulate whatever changes configured to the current system and report its effects to the performance measures. How the model was conceptualized and formulated for future system configurations are the main interest of this paper.

  8. Thermodynamic analysis of the two-phase ejector air-conditioning system for buses

    International Nuclear Information System (INIS)

    Ünal, Şaban; Yilmaz, Tuncay

    2015-01-01

    Air-conditioning compressors of the buses are usually operated with the power taken from the engine of the buses. Therefore, an improvement in the air-conditioning system will reduce the fuel consumption of the buses. The improvement in the coefficient of performance (COP) of the air-conditioning system can be provided by using the two-phase ejector as an expansion valve in the air-conditioning system. In this study, the thermodynamic analysis of bus air-conditioning system enhanced with a two-phase ejector and two evaporators is performed. Thermodynamic analysis is made assuming that the mixing process in ejector occurs at constant cross-sectional area and constant pressure. The increase rate in the COP with respect to conventional system is analyzed in terms of the subcooling, condenser and evaporator temperatures. The analysis shows that COP improvement of the system by using the two phase ejector as an expansion device is 15% depending on design parameters of the existing bus air-conditioning system. - Highlights: • Thermodynamic analysis of the two-phase ejector refrigeration system. • Analysis of the COP increase rate of bus air-conditioning system. • Analysis of the entrainment ratio of the two-phase ejector refrigeration system

  9. Location Planning for Dynamic Wireless Charging Systems for Electric Airport Passenger Buses

    Directory of Open Access Journals (Sweden)

    Stefan Helber

    2018-01-01

    Full Text Available The majority of the ground vehicles operating on the airside parts of commercial airports are currently powered by diesel engines. These include vehicles such as apron buses, fuel trucks, and aircraft tractors. Hence, these vehicles contribute to the overall CO 2 emissions of the aviation transport system and thus negatively influence its environmental footprint. To reduce this damaging environmental impact, these vehicles could potentially be electrified with on-board batteries as their energy sources. However, the conductive charging of such vehicles via stationary cable connections is rather time-consuming. A dynamic wireless charging system to supply public transportation passenger buses with electric energy while in motion has recently been installed on the Korea Advanced Institute of Science and Technology (KAIST campus and in the Korean city of Gumi. In this paper, we study configuration problems related to the use of this technology to make airport operations more environmentally sustainable. We concentrate on the power supply for apron buses and analyze the location planning problems related to the distribution of the required power supply and the wireless charging units in the apron road system. To this end, we develop a formal optimization model and discuss the first numerical results.

  10. Safety issues in urban transit facilities for hydrogen-fueled buses

    International Nuclear Information System (INIS)

    Hay, R.H.; Ducharme, P.

    2004-01-01

    'Full text:' The Canadian Transportation Fuel Cell Alliance (CTFCA), created by the Canadian Government as part of its 2000 Climate Change Action Plan, has commissioned MARCON-DDM's Hydrogen Intervention Team (HIT) to provide a roadmap for urban transit systems that wish to move to hydrogen fuel cell-powered bus fleets. HIT is currently in the process of gathering information from hydrogen technology providers, bus manufacturers, fuelling system providers and urban transit systems in Canada, the US and Europe. In September, HIT will be in a position to provide a hands-on perspective of the introduction of fuel-cell buses in the Canadian environment. Part of the process of adding hydrogen-fueled busses to urban transit systems involves phasing in the new technology to minimize the economic cost. This involves substituting hydrogen buses into the normal bus procurement life cycle and maximizing the use of existing facilities for garaging, maintenance and fueling. Using a schematic outline of an urban transit system, this presentation will outline the safety issues specific to hydrogen in such systems, particularly for garaging, maintenance and fueling components. It will then outline how safety of these component is addressed in current and proposed codes, standards and recommended practices. Based on these requirements the impact of the introduction of hydrogen-fueled buses on each component of the transit system will be addressed in terms of the adaptations of current facilities and practices or the requirements for new facilities and practices. (author)

  11. Buses retrofitting with diesel particle filters: Real-world fuel economy and roadworthiness test considerations.

    Science.gov (United States)

    Fleischman, Rafael; Amiel, Ran; Czerwinski, Jan; Mayer, Andreas; Tartakovsky, Leonid

    2018-05-01

    Retrofitting older vehicles with diesel particulate filter (DPF) is a cost-effective measure to quickly and efficiently reduce particulate matter emissions. This study experimentally analyzes real-world performance of buses retrofitted with CRT DPFs. 18 in-use Euro III technology urban and intercity buses were investigated for a period of 12months. The influence of the DPF and of the vehicle natural aging on buses fuel economy are analyzed and discussed. While the effect of natural deterioration is about 1.2%-1.3%, DPF contribution to fuel economy penalty is found to be 0.6% to 1.8%, depending on the bus type. DPF filtration efficiency is analyzed throughout the study and found to be in average 96% in the size range of 23-560nm. Four different load and non-load engine operating modes are investigated on their appropriateness for roadworthiness tests. High idle is found to be the most suitable regime for PN diagnostics considering particle number filtration efficiency. Copyright © 2017. Published by Elsevier B.V.

  12. Quantification of self pollution from two diesel school buses using three independent methods

    Science.gov (United States)

    Sally Liu, L.-J.; Phuleria, Harish C.; Webber, Whitney; Davey, Mark; Lawson, Douglas R.; Ireson, Robert G.; Zielinska, Barbara; Ondov, John M.; Weaver, Christopher S.; Lapin, Charles A.; Easter, Michael; Hesterberg, Thomas W.; Larson, Timothy

    2010-09-01

    We monitored two Seattle school buses to quantify the buses' self pollution using the dual tracers (DT), lead vehicle (LV), and chemical mass balance (CMB) methods. Each bus drove along a residential route simulating stops, with windows closed or open. Particulate matter (PM) and its constituents were monitored in the bus and from a LV. We collected source samples from the tailpipe and crankcase emissions using an on-board dilution tunnel. Concentrations of PM 1, ultrafine particle counts, elemental and organic carbon (EC/OC) were higher on the bus than the LV. The DT method estimated that the tailpipe and the crankcase emissions contributed 1.1 and 6.8 μg m -3 of PM 2.5 inside the bus, respectively, with significantly higher crankcase self pollution (SP) when windows were closed. Approximately two-thirds of in-cabin PM 2.5 originated from background sources. Using the LV approach, SP estimates from the EC and the active personal DataRAM (pDR) measurements correlated well with the DT estimates for tailpipe and crankcase emissions, respectively, although both measurements need further calibration for accurate quantification. CMB results overestimated SP from the DT method but confirmed crankcase emissions as the major SP source. We confirmed buses' SP using three independent methods and quantified crankcase emissions as the dominant contributor.

  13. Studies of self-pollution in diesel school buses: methodological issues.

    Science.gov (United States)

    Borak, Jonathan; Sirianni, Greg

    2007-09-01

    Considerable interest has focused on levels of exhaust emissions in the cabins of diesel-powered school buses and their possible adverse health effects. Significantly different policy and engineering issues would be raised if compelling evidence found that inc-cabin contamination was due to self-pollution from bus emissions, rather than ambient pollution, neighboring vehicles, and/or re-entrained road dust. We identified 19 reports from 11 studies that measured diesel exhaust particulate in the cabins of 58 school bus of various type. Studies were evaluated in light of their experimental design, their data quality, and their capacity to quantify self-pollution. Only one study had a true experimental design, comparing the same buses with and without emission controls, while four others used intentional tracers to quantify tail pipe and/or crankcase emissions. Although definitive data are still lacking, these studies suggest that currently available control technologies can nearly eliminate particulate self-pollution inside diesel school buses.

  14. Instant messaging at the hospital: supporting articulation work?

    Science.gov (United States)

    Iversen, Tobias Buschmann; Melby, Line; Toussaint, Pieter

    2013-09-01

    Clinical work is increasingly fragmented and requires extensive articulation and coordination. Computer systems may support such work. In this study, we investigate how instant messaging functions as a tool for supporting articulation work at the hospital. This paper aims to describe the characteristics of instant messaging communication in terms of number and length of messages, distribution over time, and the number of participants included in conversations. We also aim to determine what kind of articulation work is supported by analysing message content. Analysis of one month's worth of instant messages sent through the perioperative coordination and communication system at a Danish hospital. Instant messaging was found to be used extensively for articulation work, mostly through short, simple conversational exchanges. It is used particularly often for communication concerning the patient, specifically, the coordination and logistics of patient care. Instant messaging is used by all actors involved in the perioperative domain. Articulation work and clinical work are hard to separate in a real clinical setting. Predefined messages and strict workflow design do not suffice when supporting communication in the context of collaborative clinical work. Flexibility is of vital importance, and this needs to be reflected in the design of supportive communication systems. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  15. Information Transfer Capacity of Articulators in American Sign Language.

    Science.gov (United States)

    Malaia, Evie; Borneman, Joshua D; Wilbur, Ronnie B

    2018-03-01

    The ability to convey information is a fundamental property of communicative signals. For sign languages, which are overtly produced with multiple, completely visible articulators, the question arises as to how the various channels co-ordinate and interact with each other. We analyze motion capture data of American Sign Language (ASL) narratives, and show that the capacity of information throughput, mathematically defined, is highest on the dominant hand (DH). We further demonstrate that information transfer capacity is also significant for the non-dominant hand (NDH), and the head channel too, as compared to control channels (ankles). We discuss both redundancy and independence in articulator motion in sign language, and argue that the NDH and the head articulators contribute to the overall information transfer capacity, indicating that they are neither completely redundant to, nor completely independent of, the DH.

  16. The Landscape of Mass Mediated Articulations of Biotechnology

    DEFF Research Database (Denmark)

    Horst, Maja

    The objective of this paper is to explore the associations made in mass mediatedarticulations of biotechnology. It serves as the basis for further analyses of massmediated controversies and the purpose is to establish a map of the landscape ofmass mediated articulation of biotechnology. Which kinds...... of genetic researchand technology are articulated in what way? What can be associated to what inthe mass mediation and when is it portrayed as controversial? In short this is astudy of associations in the news production that serves as a way of establishingan empirical archive for further work. It is based...... on a relational ontologyinspired by French philosopher Bruno Latour, supplemented with the method ofcontent analysis developed within sociology of mass media. The aim is to studythe production of networks of articulation in mass media by looking at theoutcome (the articles), which they produce....

  17. Facilitated Articulation of Implicit Knowledge in Textile Design

    DEFF Research Database (Denmark)

    Bang, Anne Louise

    2009-01-01

    This is a report from an ongoing research project and as such it is work in progress. The paper proposes an exploratory approach in order to enable end-users to contribute with their experiences of emotional values of fabrics in use. It is suggested that the textile designer with her repertoire...... of (experiential, implicit and tacit) textile design knowledge should facilitate the articulation process. The paper specifically draws on a series of workshops conducted within the collaborating company inviting all employees to participate. The series of workshops were based on a game-like setting and introduced...... - being a textile designer herself, who functioned as the facilitator. This paper uses two examples from the series of workshops to exemplify a facilitated articulation of implicit knowledge in textile design. From the examples the following themes are synthesised as being important for articulation...

  18. Desi Films: Articulating Images of South Asian Identity in a Global Communication Environment

    Directory of Open Access Journals (Sweden)

    Rekha Sharma

    2011-01-01

    Full Text Available Although India itself has been an important source of information about the Indian identity for Western audiences, a specialized genre of desi media have also garnered more recognition in recent years. Desi films—movies created by and/or for South Asian immigrants—are capable of reaching large numbers of people regardless of their educational level, economic status, or linguistic proficiency. Most are produced in English or with English subtitles and are easily accessible in most areas, either in theatres, video rental stores, libraries, or via Internet movie sites. This paper examines Indian diasporic films as a vehicle for cultural articulation and debate. First, it provides a theoretical foundation of hegemony and resistance with regard to notions of ethnicity and immigrants’ articulations of identity in interstitial zones. Second, it discusses sources of hegemony from Indian and Western media. Third, it explores the creation of a hybrid identity as reflected in Indian diasporic films, pointing out some of the themes and conventions of this emerging genre.

  19. Hybrid Turbine Electric Vehicle

    Science.gov (United States)

    Viterna, Larry A.

    1997-01-01

    Hybrid electric power trains may revolutionize today's ground passenger vehicles by significantly improving fuel economy and decreasing emissions. The NASA Lewis Research Center is working with industry, universities, and Government to develop and demonstrate a hybrid electric vehicle. Our partners include Bowling Green State University, the Cleveland Regional Transit Authority, Lincoln Electric Motor Division, the State of Ohio's Department of Development, and Teledyne Ryan Aeronautical. The vehicle will be a heavy class urban transit bus offering double the fuel economy of today's buses and emissions that are reduced to 1/10th of the Environmental Protection Agency's standards. At the heart of the vehicle's drive train is a natural-gas-fueled engine. Initially, a small automotive engine will be tested as a baseline. This will be followed by the introduction of an advanced gas turbine developed from an aircraft jet engine. The engine turns a high-speed generator, producing electricity. Power from both the generator and an onboard energy storage system is then provided to a variable-speed electric motor attached to the rear drive axle. An intelligent power-control system determines the most efficient operation of the engine and energy storage system.

  20. New portal axle for low-floor electric-powered city buses; Neue Portalachse fuer Niederflur-Stadtbusse mit E-Antrieb

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Axel Michael [ZF Friedrichshafen AG, Friedrichshafen (Germany); Solka, Ulrich [ZF Passau GmbH, Passau (Germany)

    2010-07-01

    Serial hybrid systems do have due to the very distinctive intra-urban driving cycles and the low average speeds in city bus applications very good technical characteristics regarding reduction of emissions and fuel consumption. Hence, in comparison to passenger car applications this technical solution has found a wide spreading in the field of city busses. This contribution describes the essential characteristics of the new-developed, electrically driven low floor portal axle AVE 130 for city buses from ZF. Beside the main features of the mechanical constructive assembly, the qualities of the electric drive with the features of the specifically developed asynchronous electrical machines are shown. Another main focus forms the description of the system characteristics of a city bus, which is equipped with a serial hybrid system and the new electrical portal axle. On this occasion, traction performances, aggregate arrangement, weight balances and the interaction of the components in the electrical driveline are discussed. Finally the results of simulation calculations regarding the fuel saving potential in such systems round the paper out. (orig.)

  1. Frida Kahlo: Visual Articulations of Suffering and Loss.

    Science.gov (United States)

    Nixon, Lois LaCivita

    1996-01-01

    Illustrates the value of interdisciplinary approaches to patient care by exploring visual articulations of suffering as rendered by one artist. Makes general observations about the nature of humanities courses offered to medical students and depicts a visual portrayal of an illness story representing personal perspectives about patient suffering…

  2. Analysing co-articulation using frame-based feature trajectories

    CSIR Research Space (South Africa)

    Badenhorst, J

    2010-11-01

    Full Text Available The authors investigate several approaches aimed at a more detailed understanding of co-articulation in spoken utterances. They find that the Euclidean difference between instantaneous frame-based feature values and the mean values of these features...

  3. The Effect of Articulation Style on Perception of Modulated Tempo

    Science.gov (United States)

    Geringer, John M.; Madsen, Clifford K.; MacLeod, Rebecca B.; Kevin Droe

    2006-01-01

    We investigated the effect of legato and staccato articulation styles on the perception of modulated tempos. Ninety music majors served as participants. Listeners heard music examples that had been selected from two pieces, each of which included staccato and legato passages. Excerpts were presented to listeners in three conditions of tempo…

  4. The "ACA Code of Ethics": Articulating Counseling's Professional Covenant

    Science.gov (United States)

    Ponton, Richard F.; Duba, Jill D.

    2009-01-01

    The "ACA Code of Ethics" (American Counseling Association, 2005) is an articulation of the ever-changing relationship between counseling professionals and society. It provides clear parameters of behaviors to meet the changing needs of the people counselors are called to serve. This article reviews the 2005 "Code" as both a statement of counselor…

  5. Compromising Composition: Articulating Quality and Practice in Distance Education Policy.

    Science.gov (United States)

    Carnegie, Teena A. M.

    Policies exist in every aspect of people's lives from the landlord's policy on pets to the government's policy on literacy. As such, policy becomes the ideal place to begin to examine the articulation of distance education because policy inevitably marks the site where different kinds of political discourses and social practices intersect. By…

  6. From intricate to integrated : Biofabrication of articulating joints

    NARCIS (Netherlands)

    Groen, Wilhelmina Margaretha; Diloksumpan, Paweena; van Weeren, Paul René; Levato, Riccardo; Malda, Jos

    2017-01-01

    Articulating joints owe their function to the specialized architecture and the complex interplay between multiple tissues including cartilage, bone and synovium. Especially the cartilage component has limited self-healing capacity and damage often leads to the onset of osteoarthritis, eventually

  7. Articulated Multimedia Physics, Lesson 3, The Arithmetic of Scientific Notation.

    Science.gov (United States)

    New York Inst. of Tech., Old Westbury.

    As the third lesson of the Articulated Multimedia Physics Course, instructional materials are presented in this study guide. An introductory description is given for scientific notation methods. The subject content is provided in scrambled form, and the use of matrix transparencies is required for students to control their learning process.…

  8. The Minnesota Articulation Project and Its Proficiency-Based Assessments.

    Science.gov (United States)

    Chalhoub-Deville, Micheline

    1997-01-01

    Reports on the Minnesota Articulation Project, providing an overview of the projects' three principal working groups: political action, curriculum, and assessment. The article then outlines the theoretical underpinnings of the proficiency-based assessment instruments developed in French, German, and Spanish and describes in detail the content and…

  9. Syllable reduction and articulation rates in Danish, Norwegian and Swedish

    NARCIS (Netherlands)

    Hilton, N.H.; Schüppert, Anja; Gooskens, C.S.

    2011-01-01

    This investigation compares articulation rates of phonological and phonetic syllables in Norwegian, Swedish and Danish to investigate differences in degrees of syllable deletion (reduction) among these three languages. For the investigation two sets of data are used: one consisting of recorded

  10. Active cells for redundant and configurable articulated structures

    International Nuclear Information System (INIS)

    Swensen, John P; Nawroj, Ahsan I; Pounds, Paul E I; Dollar, Aaron M

    2014-01-01

    The proposed research effort explores the development of active cells—simple contractile electro-mechanical units that can be used as the material basis for larger articulable structures. Each cell, which might be considered a ‘muscle unit,’ consists of a contractile Nitinol Shape Memory Alloy (SMA) core with conductive terminals. Large numbers of these cells might be combined and externally powered to change phase, contracting to either articulate with a large strain or increase the stiffness of the ensemble, depending on the cell design. Unlike traditional work in modular robotics, the approach presented here focuses on cells that have a simplistic design and function, are inexpensive to fabricate, and are eventually scalable to sub-millimeter sizes, working toward our vision of articulated and robotic structures that can be custom-fabricated from large numbers of general cell units, similar to biological structures. In this paper, we present the design of the active cells and demonstrate their usage with three articulated structures built with them. (paper)

  11. Adopting Clean Fuels and Technologies on School Buses. Pollution and Health Impacts in Children.

    Science.gov (United States)

    Adar, Sara D; D'Souza, Jennifer; Sheppard, Lianne; Kaufman, Joel D; Hallstrand, Teal S; Davey, Mark E; Sullivan, James R; Jahnke, Jordan; Koenig, Jane; Larson, Timothy V; Liu, L J Sally

    2015-06-15

    More than 25 million American children breathe polluted air on diesel school buses. Emission reduction policies exist, but the health impacts to individual children have not been evaluated. Using a natural experiment, we characterized the exposures and health of 275 school bus riders before, during, and after the adoption of clean technologies and fuels between 2005 and 2009. Air pollution was measured during 597 trips on 188 school buses. Repeated measures of exhaled nitric oxide (FeNO), lung function (FEV1, FVC), and absenteeism were also collected monthly (1,768 visits). Mixed-effects models longitudinally related the adoption of diesel oxidation catalysts (DOCs), closed crankcase ventilation systems (CCVs), ultralow-sulfur diesel (ULSD), or biodiesel with exposures and health. Fine and ultrafine particle concentrations were 10-50% lower on buses using ULSD, DOCs, and/or CCVs. ULSD adoption was also associated with reduced FeNO (-16% [95% confidence interval (CI), -21 to -10%]), greater changes in FVC and FEV1 (0.02 [95% CI, 0.003 to 0.05] and 0.01 [95% CI, -0.006 to 0.03] L/yr, respectively), and lower absenteeism (-8% [95% CI, -16.0 to -0.7%]), with stronger associations among patients with asthma. DOCs, and to a lesser extent CCVs, also were associated with improved FeNO, FVC growth, and absenteeism, but these findings were primarily restricted to patients with persistent asthma and were often sensitive to control for ULSD. No health benefits were noted for biodiesel. Extrapolating to the U.S. population, changed fuel/technologies likely reduced absenteeism by more than 14 million/yr. National and local diesel policies appear to have reduced children's exposures and improved health.

  12. Adopting Clean Fuels and Technologies on School Buses. Pollution and Health Impacts in Children

    Science.gov (United States)

    D’Souza, Jennifer; Sheppard, Lianne; Kaufman, Joel D.; Hallstrand, Teal S.; Davey, Mark E.; Sullivan, James R.; Jahnke, Jordan; Koenig, Jane; Larson, Timothy V.; Liu, L. J. Sally

    2015-01-01

    Rationale: More than 25 million American children breathe polluted air on diesel school buses. Emission reduction policies exist, but the health impacts to individual children have not been evaluated. Methods: Using a natural experiment, we characterized the exposures and health of 275 school bus riders before, during, and after the adoption of clean technologies and fuels between 2005 and 2009. Air pollution was measured during 597 trips on 188 school buses. Repeated measures of exhaled nitric oxide (FeNO), lung function (FEV1, FVC), and absenteeism were also collected monthly (1,768 visits). Mixed-effects models longitudinally related the adoption of diesel oxidation catalysts (DOCs), closed crankcase ventilation systems (CCVs), ultralow-sulfur diesel (ULSD), or biodiesel with exposures and health. Measurements and Main Results: Fine and ultrafine particle concentrations were 10–50% lower on buses using ULSD, DOCs, and/or CCVs. ULSD adoption was also associated with reduced FeNO (−16% [95% confidence interval (CI), −21 to −10%]), greater changes in FVC and FEV1 (0.02 [95% CI, 0.003 to 0.05] and 0.01 [95% CI, −0.006 to 0.03] L/yr, respectively), and lower absenteeism (−8% [95% CI, −16.0 to −0.7%]), with stronger associations among patients with asthma. DOCs, and to a lesser extent CCVs, also were associated with improved FeNO, FVC growth, and absenteeism, but these findings were primarily restricted to patients with persistent asthma and were often sensitive to control for ULSD. No health benefits were noted for biodiesel. Extrapolating to the U.S. population, changed fuel/technologies likely reduced absenteeism by more than 14 million/yr. Conclusions: National and local diesel policies appear to have reduced children’s exposures and improved health. PMID:25867003

  13. High prevalence of EMRSA-15 in Portuguese public buses: a worrisome finding.

    Directory of Open Access Journals (Sweden)

    Roméo Rocha Simões

    Full Text Available BACKGROUND: The nosocomial prevalence of methicillin resistant Staphylococcus aureus (MRSA in Portugal remains one of the highest in Europe and is currently around 50%. Transmission of S. aureus, including MRSA, occurs principally by direct human-to-human skin contact. However, S. aureus can survive for long periods on inanimate objects, which may represent an important reservoir for dissemination as well. METHODOLOGY/PRINCIPAL FINDINGS: Between May 2009 and February 2010, handrails of 85 public urban buses circulating in Oporto, Portugal, were screened for the occurrence of MRSA. Twenty-two (26% buses showed MRSA contamination. The molecular characterization of a total of 55 MRSA, by pulsed-field gel electrophoresis (PFGE, staphylococcal cassette chromosome (SCC mec typing, spa typing, and multilocus sequence typing (MLST, clustered the isolates into three clonal types. However, the overwhelming majority (n = 50; 91% of the isolates belonged to a single clone (PFGE A, spa types t747, t032, t025 or t020, ST22, SCCmec type IVh that exhibits the characteristics of the pandemic EMRSA-15, currently the major lineage circulating in Portuguese hospitals, namely in the Oporto region. Two additional clones were found but in much lower numbers: (i PFGE B, ST5, spa type t002, SCCmec IVa (n = 3, and (ii PFGE C, spa type t008, ST8, SCCmec IVa (n = 2. None of the 55 isolates was PVL positive. CONCLUSIONS/SIGNIFICANCE: Public buses in Oporto seem to be an important reservoir of MRSA of nosocomial origin, providing evidence that the major hospital-associated MRSA clone in Portugal is escaping from the primary ecological niche of hospitals to the community environment. Infection control measures are urgently warranted to limit the spread of EMRSA-15 to the general population and future studies are required to assess the eventual increase of MRSA in the Portuguese community, which so far remains low.

  14. Thermal Safety of the Current Buses in the Chimney of the D0 Solenoid

    International Nuclear Information System (INIS)

    Smith, R.P.

    1998-01-01

    The thermal and electrical behaviour of the current buses in the chimney of the D0 solenoid during upset conditions is modeled to guide the selection of trip levels for magnet protection circuits which discharge the magnet if abnormal conditions are detected. The current buses in the chimney are designed to operate safely without likelihood of loss of superconductivity as long as normal cooling conditions are maintained. Helium liquid level probes, helium flow instrumentation, and thermometry all are provided to certify that proper cooling conditions exist in the subcooler and chimney at all times. Rising temperatures in any portion of the system, excessive voltage drops on the vapor cooled leads, or decreasing liquid level in the subcooler or flow rate in the system, will each cause the fast discharge system to be triggered. Postulated failures of the helium flow system, somehow undetected by any and all of the aforementioned instrumentation, can in principal eventually lead to loss of superconductivity in the buses. Quenching in one bus will rapidly lead to quenching in the other. Potential taps on the buses and magnet coil halves connected to voltage-detection bridges external to the system provide at least dually redundant signals which will unambiguously trigger the magnet rapid discharge system. The conservative design of the bus system ensures that it will not be damaged during such incidents, however improbable they may be. The transition leads in the subcooler are equally conservatively designed, and would not be damaged if they were operated in a fully non-superconducting state for several minutes. The loss of liquid helium in the sub cooler required to cause this condition would imply that helium flow from the magnet had stopped, which in turn would imply that flow to the magnet had also stopped. The lack of flow into the sub cooler would result in insufficient flow to the vapor cooled leads. Any or all of these conditions would be detected, as would

  15. Operational integrity using field buses; Integridade operacional utilizando barramentos de campo

    Energy Technology Data Exchange (ETDEWEB)

    Hennig, Carlos Henrique [Coester Automacao S.A., Sao Leopoldo, RS (Brazil)

    2004-07-01

    The device information is collected using standardized Filed Buses with high data transmission capacity, which allows the analysis of his operational status in real time. The quantity of information generated by the devices for the maintenance area is increasing and this data quantity transferred through the field bus should not interfere in the network performance to the point of degrade his control function. In this way, is presented a technique that can be used in different protocols, which allow sending of maintenance data using a small band of the communication channel. Operational integrity can be achieved using predictive maintenance techniques based on the collected data. (author)

  16. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2015

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gikakis, Christina [Federal Transit Administration, Washington, DC (United States)

    2015-12-11

    This report, published annually, summarizes the progress of fuel cell electric bus (FCEB) development in the United States and discusses the achievements and challenges of introducing fuel cell propulsion in transit. Various stakeholders, including FCEB developers, transit agencies, and system integrators, have expressed the value of this annual status report, which provides a summary of results from evaluations performed by the National Renewable Energy Laboratory. The annual status report tracks the progress of the FCEB industry toward meeting technical targets, documents the lessons learned, and discusses the path forward for commercial viability of fuel cell technology for transit buses. The 2015 summary results primarily focus on the most recent year for each demonstration, from August 2014 through July 2015. The results for these buses account for more than 1,045,000 miles traveled and 83,000 hours of fuel cell power system operation. The primary results presented in the report are from two demonstrations of fuel-cell-dominant bus designs: the Zero Emission Bay Area Demonstration Group led by Alameda-Contra Costa Transit District (AC Transit) in California and the American Fuel Cell Bus Project at SunLine Transit Agency in California.

  17. Ways to improve the environmental conditions of their buses in operation on passenger routes of cities

    Directory of Open Access Journals (Sweden)

    Melnychuk S.V.

    2017-04-01

    Full Text Available The results of studies on operational and environmental parameters buses used on bus routes Zhitomir city. It uses statistical methods for determining the intensity of traffic, passenger traffic and ecology in traffic. To assess the environmental chosen stop with the greatest intensity of traffic, which is the probability of accumulation of pollution transport emissions that exceed permissible limits. Calculation of environmental pollution emission route for vehicles made stops street «Str. Hundreds of Heaven» «CUM», «vul. Hlibna» on the main trunk street Kievska. Results obtained environmental field experiments compared with the data defined calculation methods, based on the proposed use appropriate operational vehicles. The conclusions that indicate the seriousness of the problem and the urgency to address it. The system of environmental safety and road safety in Zhitomir requires significant improvements due to the increased quantities bus vehicles plying city routes. Recommendations to improve the ecological condition of intersections can be developed through the optimization of traffic using buses with environmentally improved operating parameters. Keywords: environmental and operational parameters; ecological safety; environmental assessment; intensity of traffic; passenger traffic; environmental conditions; operation; bus choice; stop.

  18. Gender Recognition from Unconstrained and Articulated Human Body

    Science.gov (United States)

    Wu, Qin; Guo, Guodong

    2014-01-01

    Gender recognition has many useful applications, ranging from business intelligence to image search and social activity analysis. Traditional research on gender recognition focuses on face images in a constrained environment. This paper proposes a method for gender recognition in articulated human body images acquired from an unconstrained environment in the real world. A systematic study of some critical issues in body-based gender recognition, such as which body parts are informative, how many body parts are needed to combine together, and what representations are good for articulated body-based gender recognition, is also presented. This paper also pursues data fusion schemes and efficient feature dimensionality reduction based on the partial least squares estimation. Extensive experiments are performed on two unconstrained databases which have not been explored before for gender recognition. PMID:24977203

  19. Gender recognition from unconstrained and articulated human body.

    Science.gov (United States)

    Wu, Qin; Guo, Guodong

    2014-01-01

    Gender recognition has many useful applications, ranging from business intelligence to image search and social activity analysis. Traditional research on gender recognition focuses on face images in a constrained environment. This paper proposes a method for gender recognition in articulated human body images acquired from an unconstrained environment in the real world. A systematic study of some critical issues in body-based gender recognition, such as which body parts are informative, how many body parts are needed to combine together, and what representations are good for articulated body-based gender recognition, is also presented. This paper also pursues data fusion schemes and efficient feature dimensionality reduction based on the partial least squares estimation. Extensive experiments are performed on two unconstrained databases which have not been explored before for gender recognition.

  20. Cerec omnicam and the virtual articulator--a case report.

    Science.gov (United States)

    Fritzsche, G

    2013-01-01

    This case report demonstrates how two opposing teeth were restored with full crowns using Cerec software version 4.2 (pre-release version). In addition, an anterior tooth was provided with a veneer. The situation was scanned with the Cerec Omnicam. The new virtual articulator was used for the design to obtain correct dynamic contacts. The Cerec Omnicam can scan the entire situation prior to preparation without the help of an assistant, as no surface pretreatment is necessary. The locations of the occlusal contacts can be marked with articulating paper and are indicated on the virtual models. Selective deletion of individual areas allows the prepared teeth to be rescanned, considerably speeding up the workflow. A video demonstration is available of the acquisition and design procedure.

  1. Effects of fit and motive articulation on sponsorship response

    OpenAIRE

    Abramova, Anna

    2013-01-01

    This study is dedicated to finding the right combination between provision of fit and motive articulation to provide the best sponsorship response. The paper integrates different factors used in the sponsorship literature and other academic articles in the field of marketing into a conceptual model. Such mediating variables as corporate ability, corporate social responsibility, sponsor attitude and persuasion knowledge and moderating variables as involvement, self-congruence and frequency of ...

  2. Dynamics of an articulated shell type flexible rotor

    International Nuclear Information System (INIS)

    Suleman, M.; Khan, M.Z.; Nazeer, M.M.

    2001-01-01

    An ultra high speed articulated shell type flexible rotor supported by low stiffness flexible bearing encounters a number of dynamic problems while traversing towards or from the service speed. The major and critical problems that arise are: Synchronous and Sub-synchronous vibration due to instabilities. Structural resonances and rubs due to eccentricities of structure and magnetic bearing. The symptoms of these troubles, their root causes and remedial measures are highlighted and discussed in this work. (author)

  3. Articulating social science in the wild of global natures?

    DEFF Research Database (Denmark)

    Blok, Anders

    2014-01-01

    Building on multisited ethnographic case studies, this paper seeks to contrastively compare the demonstration and articulation formats of two social science expert cultures—economics and anthropology—enrolled ‘in the wild’ of transnational environmental politics. How, the paper asks, do different......) similarities, related to credible expert demonstrations in transnational environmental contexts. The paper concludes by discussing the implications of this claim for STS self-reflection on its politics of methods....

  4. Gender Recognition from Unconstrained and Articulated Human Body

    OpenAIRE

    Wu, Qin; Guo, Guodong

    2014-01-01

    Gender recognition has many useful applications, ranging from business intelligence to image search and social activity analysis. Traditional research on gender recognition focuses on face images in a constrained environment. This paper proposes a method for gender recognition in articulated human body images acquired from an unconstrained environment in the real world. A systematic study of some critical issues in body-based gender recognition, such as which body parts are informative, ho...

  5. Data-driven importance distributions for articulated tracking

    DEFF Research Database (Denmark)

    Hauberg, Søren; Pedersen, Kim Steenstrup

    2011-01-01

    We present two data-driven importance distributions for particle filterbased articulated tracking; one based on background subtraction, another on depth information. In order to keep the algorithms efficient, we represent human poses in terms of spatial joint positions. To ensure constant bone le...... filter, where they improve both accuracy and efficiency of the tracker. In fact, they triple the effective number of samples compared to the most commonly used importance distribution at little extra computational cost....

  6. Articulations of eroticism and race: Domestic service in Latin America

    OpenAIRE

    Wade, Peter

    2013-01-01

    'Service', particularly 'domestic service', operates as a specific articulation or intersection of processes of race, class, gender and age that reiterates images of the sexual desirability of some women racially marked by blackness or indigeneity in Latin America. The sexualisation of racially subordinated people has been linked to the exercise of power. This article focuses on an aspect of subordination related to the condition of being a servant, and the 'domestication' and 'acculturation'...

  7. Open software architecture for east articulated maintenance arm

    International Nuclear Information System (INIS)

    Wu, Jing; Wu, Huapeng; Song, Yuntao; Li, Ming; Yang, Yang; Alcina, Daniel A.M.

    2016-01-01

    Highlights: • A software requirement of serial-articulated robot for EAST assembly and maintains is presented. • A open software architecture of the robot is developed. • A component-based model distribution system with real-time communication of the robot is constructed. - Abstract: For the inside inspection and the maintenance of vacuum vessel in the EAST, an articulated maintenance arm is developed. In this article, an open software architecture developed for the EAST articulated maintenance arm (EAMA) is described, which offers a robust and proper performance and easy-going experience based on standard open robotic platform OROCOS. The paper presents a component-based model software architecture using multi-layer structure: end layer, up layer, middle, and down layer. In the end layer the components are defined off-line in the task planner manner. The components in up layer complete the function of trajectory plan. The CORBA, as a communication framework, is adopted to exchange the data between the distributed components. The contributors use Real-Time Workshop from the MATLAB/Simulink to generate the components in the middle layer. Real-time Toolkit guarantees control applications running in the hard real-time mode. Ethernets and the CAN bus are used for data transfer in the down layer, where the components implement the hardware functions. The distributed architecture of control system associates each processing node with each joint, which is mapped to a component with all functioning features of the framework.

  8. Open software architecture for east articulated maintenance arm

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Jing, E-mail: wujing@ipp.ac.cn [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Wu, Huapeng [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Song, Yuntao [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Li, Ming [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Yang, Yang [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Alcina, Daniel A.M. [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland)

    2016-11-01

    Highlights: • A software requirement of serial-articulated robot for EAST assembly and maintains is presented. • A open software architecture of the robot is developed. • A component-based model distribution system with real-time communication of the robot is constructed. - Abstract: For the inside inspection and the maintenance of vacuum vessel in the EAST, an articulated maintenance arm is developed. In this article, an open software architecture developed for the EAST articulated maintenance arm (EAMA) is described, which offers a robust and proper performance and easy-going experience based on standard open robotic platform OROCOS. The paper presents a component-based model software architecture using multi-layer structure: end layer, up layer, middle, and down layer. In the end layer the components are defined off-line in the task planner manner. The components in up layer complete the function of trajectory plan. The CORBA, as a communication framework, is adopted to exchange the data between the distributed components. The contributors use Real-Time Workshop from the MATLAB/Simulink to generate the components in the middle layer. Real-time Toolkit guarantees control applications running in the hard real-time mode. Ethernets and the CAN bus are used for data transfer in the down layer, where the components implement the hardware functions. The distributed architecture of control system associates each processing node with each joint, which is mapped to a component with all functioning features of the framework.

  9. The effect of skeletal pattern on determining articulator settings for prosthodontic rehabilitation: an in vivo study.

    LENUS (Irish Health Repository)

    Canning, Tom

    2011-01-01

    During extensive prosthodontic treatment, the use of an accurately adjusted articulator is recommended to simulate mandibular movements. This clinical study was undertaken to assess any possible effect of the underlying skeletal pattern on programming articulator settings.

  10. Dealing with Phrase Level Co-Articulation (PLC) in speech recognition: a first approach

    NARCIS (Netherlands)

    Ordelman, Roeland J.F.; van Hessen, Adrianus J.; van Leeuwen, David A.; Robinson, Tony; Renals, Steve

    1999-01-01

    Whereas nowadays within-word co-articulation effects are usually sufficiently dealt with in automatic speech recognition, this is not always the case with phrase level co-articulation effects (PLC). This paper describes a first approach in dealing with phrase level co-articulation by applying these

  11. New Britain, Conn. School District will Benefit from $125,000 EPA Rebate for Clean Emission School Buses

    Science.gov (United States)

    The New Britain, Conn. school district will benefit from a $125,000 US EPA rebate that will pay for retrofitted engines on seven older school buses so they would emit fewer pollutants that are linked to health problems such as asthma and lung damage.

  12. Chicopee, Mass. School District will Benefit from $200,000 EPA Rebate to Clean Up Emissions from School Buses

    Science.gov (United States)

    A school district in Chicopee., Mass. will benefit from $200,000 from the US EPA that will pay for rebates to retrofit the engines on 10 older school buses so they would emit fewer pollutants that are linked to health problems such as asthma & lung damage.

  13. NAA of an iridium tracer to determine soot exposure of students commuting on Baltimore`s buses

    Energy Technology Data Exchange (ETDEWEB)

    Ondov, J.M.; Wu, C.C.; Lin, Zhibo; Kidwell, C.B. [Univ. of Maryland, College Park, MD (United States)

    1997-12-01

    Epidemiologic studies suggest that short-term increases in indices of particulate air pollution are associated with increased mortality and morbidity from respiratory and cardiovascular diseases. An important component of urban aerosol, diesel soot, is a known respiratory irritant and contains mutagenic and carcinogenic organic compounds. In the United States, motor vehicles are thought to be the largest single source of atmospheric soot and account for {approximately}36% of the annual anthropogenic emission of toxic polynuclear aromatic hydrocarbons (PAH). Much of the motor-vehicle-derived PAH originates from diesel-powered vehicles because their PAH emissions are up to 50-fold greater than those from gasoline engines. In Baltimore, city high school students take public buses to school and, often, must stand at bus stops while many diesel buses pass or stop before their own buses arrive. To estimate student exposures to soot emitted from public diesel buses (MTA) during commutes to city high schools, the Baltimore municipal fuel supply was tagged with an iridium tracer, and exposure was monitored during commutes with personal aerosol monitors as a part of the Baltimore Environmental Justice Project.

  14. Pilot testing of environment-friendly low-emission alternative drive components for city buses. Phase 1. Technical final report

    International Nuclear Information System (INIS)

    Doemeland, H.; Haase, G.; Sarnes, J.; Schultheis, S.; Schuenemann, M.; Strauss, A.; Voss, K.; Aepler, E.; Stachel, K.; Wolter, M.; Lenz, W.

    1993-05-01

    The report describes pilot tests of environment-friendly, low-emission city buses with alternative drive systems. The following problems are discussed: Natural gas as primary energy source, natural gas drives, safety requirements, measurement and testing technology for natural gas engines, environmental effects, operating concepts, operating cost. (HW) [de

  15. Is the public willing to pay for hydrogen buses? A comparative study of preferences in four cities

    International Nuclear Information System (INIS)

    O'Garra, Tanya; Mourato, Susana; Garrity, Lisa; Schmidt, Patrick; Beerenwinkel, Anne; Altmann, Matthias; Hart, David; Graesel, Cornelia; Whitehouse, Simon

    2007-01-01

    This paper presents results from the international AcceptH2 study (http://www.accepth2.com) of acceptability and preferences for hydrogen fuel cell (FC) buses. Using the contingent valuation method, this paper compares public willingness to pay (WTP) for the air pollution reductions associated with a scenario of large-scale introduction of hydrogen (H 2 ) FC buses in four cities: Berlin, London, Luxembourg and Perth. Results indicate that bus users in all cities have a positive WTP for H 2 buses, and that values (adjusted to the cost of living in each city) are very similar across geographical locations (ranging from WTP an extra Euro 0.29 to Euro 0.35 per single bus fare). Non-bus users were also interviewed in London and Perth, in order to capture values for the whole populations in these cities. Combined results for bus users and non-bus users confirm that overall residents in these cities are willing to pay extra (in taxes) to support the large-scale introduction of H 2 -buses

  16. Walking School Buses as a Form of Active Transportation for Children--A Review of the Evidence

    Science.gov (United States)

    Smith, Liz; Norgate, Sarah H.; Cherrett, Tom; Davies, Nigel; Winstanley, Christopher; Harding, Mike

    2015-01-01

    Background: Walking school buses (WSBs) offer a potentially healthier way for children to get to school while reducing traffic congestion. A number of pressing societal challenges make it timely to evaluate evidence of their value. Methods: Studies that focused solely on WSBs were identified through online and manual literature searches. Twelve…

  17. Aerosol particles generated by diesel-powered school buses at urban schools as a source of children’s exposure

    Science.gov (United States)

    Hochstetler, Heather A.; Yermakov, Mikhail; Reponen, Tiina; Ryan, Patrick H.; Grinshpun, Sergey A.

    2015-01-01

    Various heath effects in children have been associated with exposure to traffic-related particulate matter (PM), including emissions from school buses. In this study, the indoor and outdoor aerosol at four urban elementary schools serviced by diesel-powered school buses was characterized with respect to the particle number concentrations and size distributions as well as the PM2.5 mass concentrations and elemental compositions. It was determined that the presence of school buses significantly affected the outdoor particle size distribution, specifically in the ultrafine fraction. The time-weighted average of the total number concentration measured outside the schools was significantly associated with the bus and the car counts. The concentration increase was consistently observed during the morning drop-off hours and in most of the days during the afternoon pick-up period (although at a lower degree). Outdoor PM2.5 mass concentrations measured at schools ranged from 3.8 to 27.6 µg m−3. The school with the highest number of operating buses exhibited the highest average PM2.5 mass concentration. The outdoor mass concentrations of elemental carbon (EC) and organic carbon (OC) were also highest at the school with the greatest number of buses. Most (47/55) correlations between traffic-related elements identified in the outdoor PM2.5 were significant with elements identified in the indoor PM2.5. Significant associations were observed between indoor and outdoor aerosols for EC, EC/OC, and the total particle number concentration. Day-to-day and school-to-school variations in Indoor/Outdoor (I/O) ratios were related to the observed differences in opening windows and doors, which enhanced the particle penetration, as well as indoor activities at schools. Overall, the results on I/O ratio obtained in this study reflect the sizes of particles emitted by diesel-powered school bus engines (primarily, an ultrafine fraction capable of penetrating indoors). PMID:25904818

  18. Aerosol particles generated by diesel-powered school buses at urban schools as a source of children's exposure.

    Science.gov (United States)

    Hochstetler, Heather A; Yermakov, Mikhail; Reponen, Tiina; Ryan, Patrick H; Grinshpun, Sergey A

    2011-03-01

    Various heath effects in children have been associated with exposure to traffic-related particulate matter (PM), including emissions from school buses. In this study, the indoor and outdoor aerosol at four urban elementary schools serviced by diesel-powered school buses was characterized with respect to the particle number concentrations and size distributions as well as the PM2.5 mass concentrations and elemental compositions. It was determined that the presence of school buses significantly affected the outdoor particle size distribution, specifically in the ultrafine fraction. The time-weighted average of the total number concentration measured outside the schools was significantly associated with the bus and the car counts. The concentration increase was consistently observed during the morning drop-off hours and in most of the days during the afternoon pick-up period (although at a lower degree). Outdoor PM2.5 mass concentrations measured at schools ranged from 3.8 to 27.6 µg m -3 . The school with the highest number of operating buses exhibited the highest average PM2.5 mass concentration. The outdoor mass concentrations of elemental carbon (EC) and organic carbon (OC) were also highest at the school with the greatest number of buses. Most (47/55) correlations between traffic-related elements identified in the outdoor PM2.5 were significant with elements identified in the indoor PM2.5. Significant associations were observed between indoor and outdoor aerosols for EC, EC/OC, and the total particle number concentration. Day-to-day and school-to-school variations in Indoor/Outdoor (I/O) ratios were related to the observed differences in opening windows and doors, which enhanced the particle penetration, as well as indoor activities at schools. Overall, the results on I/O ratio obtained in this study reflect the sizes of particles emitted by diesel-powered school bus engines (primarily, an ultrafine fraction capable of penetrating indoors).

  19. DISORDERS OF THE SOUND ARTICULATION IN PRETERM CHILDREN

    Directory of Open Access Journals (Sweden)

    Vesela MILANKOV

    2009-11-01

    Full Text Available Speech and language development is a good indicator of child’s cognitive development. The risk factors influencing development and functioning of prematurely born children are multiple. In addition to articulation disorder, there are motoric, conginitive and social aspects of delayed development. Premature babies are born before they physically ready to leave the womb. However, most babies born after about 26 weeks of gestational age have chances for survival, but they are at a greater risk of medical complications, since the earlier children are born, the less developed their organs are. Aim: To demonstrate basic parameters, establish differences, determine characteristics of disorder of sound articulation in fullterm and preterm children. Methodology: Research was conducted at the Clinics of Child’s Habilitation and Rehabilitation in Novi Sad. The prospective research study was carried out comprising 61 children with mean age of 4 years. The study inclusion criteria were gestational age and birth weight. Regarding these parameters, the children without major neurlologic or system disabilities were included, and they were Serbian speaking. The sample comprised 31 children with GS≥38 weeks and body weight of ≥3000 g, while the preterm group comprised 30 children with GS≤32 weeks and body weight of ≤1500 g. Results of the study indicate to a difference between fullterm children and preterm children with regard to articulation disorders, of which the statistically significant was a sound distortion. The overall sample showed that the substitution with distortion was most frequent disorder, while the interdental sigmatism was the most represented one. Conclusion: The obtained results lead to conclusion that preterm children, being a high-risk group, need to be followed up by age two, and provided timely proffesional help at pre-school age, since numerous adverse factors affect their overall development.

  20. Optimization of Front Axle Suspension System of Articulated Dump Truck

    DEFF Research Database (Denmark)

    Langer, Thomas Heegaard; Christensen, Brian B.; Mouritsen, Ole Ø.

    2010-01-01

    that has been subjected to comfort improvement is a two axle articulated dump truck. The comfort has been in terms of whole body vibration exposure and the overall improvement has been made possible by adding front axle suspension. However, a hydraulic stabilizing system between the tractor and trailer...... to evaluate the whole body vibrations. By use of a multibody simulation model of the dump truck the whole body vibration exposure has been computed using the predefined work cycle as model input. The design parameters comprise the components of the hydraulic subsystem of the suspension, i.e., the size...

  1. Effectiveness of an Articulated Knee Hyperextension Orthosis in Genu Recurvatum

    Directory of Open Access Journals (Sweden)

    Rahul ASRM

    2014-08-01

    Full Text Available Genu Recurvatum is a deformity of knee joint that tends to push it backwards by excessive extension in tibio-femoral joints. This poses a significant challenge because of technical difficulties and a high incidence of recurrence. This report describes a 63 years old male diagnosed as post-polio residual paralysis who showed excessive genu recurvatum of his left knee during long standing and walking. An Articulated Knee Hyperextension Orthosis (KAFO was tried to check its effectiveness in terms of gait and energy expenditure.

  2. A blind algorithm for recovering articulator positions from acoustics

    Energy Technology Data Exchange (ETDEWEB)

    Hogden, John E [Los Alamos National Laboratory

    2009-01-01

    MIMICRI is a signal-processing algorithm that has been shown to blindly infer and invert memoryless nonlinear functions of unobservable bandlimited signals, such as the mapping from the unobservable positions of the speech articulators to observable speech sounds. We review results of using MIMICRI on toy problems and on human speech data. We note that MIMICRI requires that the user specify two parameters: the dimensionality and pass-band of the unobservable signals. We show how to use cross-validation to help estimate the passband. An unexpected consequence of this work is that it helps separate signals with overlapping frequency bands.

  3. Gender Recognition from Unconstrained and Articulated Human Body

    Directory of Open Access Journals (Sweden)

    Qin Wu

    2014-01-01

    human body images acquired from an unconstrained environment in the real world. A systematic study of some critical issues in body-based gender recognition, such as which body parts are informative, how many body parts are needed to combine together, and what representations are good for articulated body-based gender recognition, is also presented. This paper also pursues data fusion schemes and efficient feature dimensionality reduction based on the partial least squares estimation. Extensive experiments are performed on two unconstrained databases which have not been explored before for gender recognition.

  4. Modeling, Simulation and Position Control of 3DOF Articulated Manipulator

    Directory of Open Access Journals (Sweden)

    Hossein Sadegh Lafmejani

    2014-08-01

    Full Text Available In this paper, the modeling, simulation and control of 3 degrees of freedom articulated robotic manipulator have been studied. First, we extracted kinematics and dynamics equations of the mentioned manipulator by using the Lagrange method. In order to validate the analytical model of the manipulator we compared the model simulated in the simulation environment of Matlab with the model was simulated with the SimMechanics toolbox. A sample path has been designed for analyzing the tracking subject. The system has been linearized with feedback linearization and then a PID controller was applied to track a reference trajectory. Finally, the control results have been compared with a nonlinear PID controller.

  5. Evaluation of articulation simulation system using artificial maxillectomy models.

    Science.gov (United States)

    Elbashti, M E; Hattori, M; Sumita, Y I; Taniguchi, H

    2015-09-01

    Acoustic evaluation is valuable for guiding the treatment of maxillofacial defects and determining the effectiveness of rehabilitation with an obturator prosthesis. Model simulations are important in terms of pre-surgical planning and pre- and post-operative speech function. This study aimed to evaluate the acoustic characteristics of voice generated by an articulation simulation system using a vocal tract model with or without artificial maxillectomy defects. More specifically, we aimed to establish a speech simulation system for maxillectomy defect models that both surgeons and maxillofacial prosthodontists can use in guiding treatment planning. Artificially simulated maxillectomy defects were prepared according to Aramany's classification (Classes I-VI) in a three-dimensional vocal tract plaster model of a subject uttering the vowel /a/. Formant and nasalance acoustic data were analysed using Computerized Speech Lab and the Nasometer, respectively. Formants and nasalance of simulated /a/ sounds were successfully detected and analysed. Values of Formants 1 and 2 for the non-defect model were 675.43 and 976.64 Hz, respectively. Median values of Formants 1 and 2 for the defect models were 634.36 and 1026.84 Hz, respectively. Nasalance was 11% in the non-defect model, whereas median nasalance was 28% in the defect models. The results suggest that an articulation simulation system can be used to help surgeons and maxillofacial prosthodontists to plan post-surgical defects that will be facilitate maxillofacial rehabilitation. © 2015 John Wiley & Sons Ltd.

  6. The technology of mobile robot with articulated crawler mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Kim, Byung Soo; Kim, Chang Hoi; Hwang, Suk Yong; Suh, Yong Chil; Lee, Yung Kwang; Sin, Jae Ho [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-01-01

    The main application of a mobile robot are to do the inspection and maintenance tasks in the primary and auxiliary building, and to meet with the radiological emergency response in nuclear power plant. Our project to develop crawler-type mobile robot has been divided into 3 phases. In 1 st phase, the-state-of-the-arts of mobile robot technology were studied and analyzed. And then the technical report `development of mobile robot technology for the light work` was published on July, 1993. In current phase, the articulated crawler type mobile robot named as ANDROS Mark VI was purchased to evaluate deeply its mechanism and control system. Then we designed the autonomous track surface, to get the inclination angle of robot, and to control the front and rear auxiliary track autonomously during climbing up and down stairs. And also, the autonomous stair-climbing algorithm has been developed to going over stairs with high stability. For the final phase, the advanced model of articulated crawler type mobile robot is going to be developed. (Author) 13 refs., 30 figs., 12 tabs.

  7. The technology of mobile robot with articulated crawler mechanism

    International Nuclear Information System (INIS)

    Kim, Seung Ho; Kim, Byung Soo; Kim, Chang Hoi; Hwang, Suk Yong; Suh, Yong Chil; Lee, Yung Kwang; Sin, Jae Ho

    1995-01-01

    The main application of a mobile robot are to do the inspection and maintenance tasks in the primary and auxiliary building, and to meet with the radiological emergency response in nuclear power plant. Our project to develop crawler-type mobile robot has been divided into 3 phases. In 1 st phase, the-state-of-the-arts of mobile robot technology were studied and analyzed. And then the technical report 'development of mobile robot technology for the light work' was published on July, 1993. In current phase, the articulated crawler type mobile robot named as ANDROS Mark VI was purchased to evaluate deeply its mechanism and control system. Then we designed the autonomous track surface, to get the inclination angle of robot, and to control the front and rear auxiliary track autonomously during climbing up and down stairs. And also, the autonomous stair-climbing algorithm has been developed to going over stairs with high stability. For the final phase, the advanced model of articulated crawler type mobile robot is going to be developed. (Author) 13 refs., 30 figs., 12 tabs

  8. A highly articulated robotic surgical system for minimally invasive surgery.

    Science.gov (United States)

    Ota, Takeyoshi; Degani, Amir; Schwartzman, David; Zubiate, Brett; McGarvey, Jeremy; Choset, Howie; Zenati, Marco A

    2009-04-01

    We developed a novel, highly articulated robotic surgical system (CardioARM) to enable minimally invasive intrapericardial therapeutic delivery through a subxiphoid approach. We performed preliminary proof of concept studies in a porcine preparation by performing epicardial ablation. CardioARM is a robotic surgical system having an articulated design to provide unlimited but controllable flexibility. The CardioARM consists of serially connected, rigid cyclindrical links housing flexible working ports through which catheter-based tools for therapy and imaging can be advanced. The CardioARM is controlled by a computer-driven, user interface, which is operated outside the operative field. In six experimental subjects, the CardioARM was introduced percutaneously through a subxiphoid access. A commercial 5-French radiofrequency ablation catheter was introduced through the working port, which was then used to guide deployment. In all subjects, regional ("linear") left atrial ablation was successfully achieved without complications. Based on these preliminary studies, we believe that the CardioARM promises to enable deployment of a number of epicardium-based therapies. Improvements in imaging techniques will likely facilitate increasingly complex procedures.

  9. Vertical repositioning accuracy of magnetic mounting systems on 4 articulator models.

    Science.gov (United States)

    Lee, Wonsup; Kwon, Ho-Beom

    2018-03-01

    Research of the ability of a cast mounted on an articulator on maintaining the identical position of a cast mounted on an articulator after repeated repositioning is lacking, despite the possible effects this may have on the occlusion of a mounted cast. The purpose of this in vitro study was to verify and compare the vertical repositioning accuracy of 4 different, commercially available articulator magnetic mounting plate systems. Four articulators and their associated magnetic mounting plates were selected for the study. These were the Artex AR articulator (Amann Girrbach AG), the Denar Mark II articulator (Whip Mix Corp), the Kavo Protar Evo articulator (Kavo Dental GmbH), and the SAM3 articulator (SAM Präzisionstechnik GmbH). Three new magnetic mounting plates were prepared for each articulator system. The repositioning accuracy of each mounting plate was evaluated by comparing the standard deviation of the vertical distances measured between the mounting plate and a laser displacement sensor. The lower arm of the articulator was secured, and the vertical distance was measured by positioning the laser displacement sensor positioned vertically above the mounting plate. Once the vertical distance was measured, the mounting plate was detached from the articulator and reattached manually to prepare for the next measurement. This procedure was repeated 30 times for each of the 3 magnetic mounting plates. Data were analyzed by ANOVA for 2-stage nested design and the Levene test (α=.05). Significant differences were detected among articulator systems and between magnetic mounting plates of the same type. The standard deviations of the measurements made with the Artex AR articulator, Denar Mark II articulator, Kavo Protar Evo articulator, and SAM3 articulator were 0.0027, 0.0308, 0.0214, and 0.0215 mm, respectively. Thus, the repositioning accuracy could be ranked in the order as follows: Artex AR, Kavo Protar Evo, SAM3, and Denar Mark II. The position of the

  10. HRB, Hydrostatically Regenerative Brake system for dust-carts and buses; HRB, ein hydraulischer Hybrid fuer Muellfahrzeuge und Busse

    Energy Technology Data Exchange (ETDEWEB)

    Ehret, Christine; Kliffken, Markus G.; Bracht, Detlef van [Bosch Rexroth AG (Germany)

    2009-07-01

    The HRB, Hydrostatically Regenerative Brake System by Rexroth, saves up to 25 percent diesel in heavy-duty industrial vehicles and also reduces exhaust emissions. Practical tests and field tests with a dust-cart of Haller Umweltsysteme GmbH and Co. KG in the city of Berlin proved this. The dust-cart has been in operation since July 2008. Measurements in practical operation have proved the savings calculated in simulations. Detailed economic efficiency calculations are possible in advance with a software also developed by Rexroth.

  11. Audiovisual materials are effective for enhancing the correction of articulation disorders in children with cleft palate.

    Science.gov (United States)

    Pamplona, María Del Carmen; Ysunza, Pablo Antonio; Morales, Santiago

    2017-02-01

    Children with cleft palate frequently show speech disorders known as compensatory articulation. Compensatory articulation requires a prolonged period of speech intervention that should include reinforcement at home. However, frequently relatives do not know how to work with their children at home. To study whether the use of audiovisual materials especially designed for complementing speech pathology treatment in children with compensatory articulation can be effective for stimulating articulation practice at home and consequently enhancing speech normalization in children with cleft palate. Eighty-two patients with compensatory articulation were studied. Patients were randomly divided into two groups. Both groups received speech pathology treatment aimed to correct articulation placement. In addition, patients from the active group received a set of audiovisual materials to be used at home. Parents were instructed about strategies and ideas about how to use the materials with their children. Severity of compensatory articulation was compared at the onset and at the end of the speech intervention. After the speech therapy period, the group of patients using audiovisual materials at home demonstrated significantly greater improvement in articulation, as compared with the patients receiving speech pathology treatment on - site without audiovisual supporting materials. The results of this study suggest that audiovisual materials especially designed for practicing adequate articulation placement at home can be effective for reinforcing and enhancing speech pathology treatment of patients with cleft palate and compensatory articulation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. Multistage optimal PMU placement for hybrid state estimation

    DEFF Research Database (Denmark)

    Hazra, J.; Das, Kaushik; Roy, B. K. S.

    2017-01-01

    placed by the proposed method are used in developing a hybrid state estimator (HSE). The HSE estimates the voltage phasor at all the buses of a power system with a limited numbers of PMUs in steady state as well as in the presence of disturbances even in that part of network which is unobservable through...... PMUs. Performance of the proposed phased installation scheme for HSE is evaluated on the number of standard test system and the simulation results shows an improvement in the accuracy of the estimated states as compared to the existing methods in the literature....

  13. Combustion Chemistry of Biodiesel for the Use in Urban Transport Buses: Experiment and Modeling

    Science.gov (United States)

    Omidvarborna, Hamid

    Biofuels, such as biodiesel, offer benefits as a possible alternative to conventional fuels due to their fuel source sustainability and their reduced environmental impact. Before they can be used, it is essential to understand their combustion chemistry and emission characterizations due to a number of issues associated with them (e.g., high emission of nitrogen oxides (NOx), lower heating value than diesel, etc.). During this study, emission characterizations of different biodiesel blends (B0, B20, B50, and B100) were measured on three different feedstocks (soybean methyl ester (SME), tallow oil (TO), and waste cooking oil (WCO)) with various characteristics, while an ultra-low sulfur diesel (ULSD) was used as base fuel at low-temperature combustion (LTC). A laboratory combustion chamber was used to analyze soot formation, NOx emissions, while real engine emissions were measured for further investigation on PM and NOx emissions. For further study, carbon emissions (CO, CO 2, and CH4) were also measured to understand their relations with feedstocks' type. The emissions were correlated with fuel's characteristics, especially unsaturation degree (number of double bonds in methyl esters) and chain length (oxygen-to-carbon ratio). The experimental results obtained from laboratory experiments were confirmed by field experiments (real engines) collected from Toledo area regional transit authority (TARTA) buses. Combustion analysis results showed that the neat biodiesel fuels had longer ignition delays and lower ignition temperatures compared to ULSD at the tested condition. The results showed that biodiesel containing more unsaturated fatty acids emitted higher levels of NOx compared to biodiesel with more saturated fatty acids. A paired t-test on fuels showed that neat biodiesel fuels had significant reduction in the formation of NOx compared with ULSD. In another part of this study, biodiesel fuel with a high degree of unsaturation and high portion of long chains of

  14. Dynamics and control of robotic aircraft with articulated wings

    Science.gov (United States)

    Paranjape, Aditya Avinash

    There is a considerable interest in developing robotic aircraft, inspired by birds, for a variety of missions covering reconnaissance and surveillance. Flapping wing aircraft concepts have been put forth in light of the efficiency of flapping flight at small scales. These aircraft are naturally equipped with the ability to rotate their wings about the root, a form of wing articulation. This thesis covers some problems concerning the performance, stability and control of robotic aircraft with articulated wings in gliding flight. Specifically, we are interested in aircraft without a vertical tail, which would then use wing articulation for longitudinal as well as lateral-directional control. Although the dynamics and control of articulated wing aircraft share several common features with conventional fixed wing aircraft, the presence of wing articulation presents several unique benefits as well as limitations from the perspective of performance and control. One of the objective of this thesis is to understand these features using a combination of theoretical and numerical tools. The aircraft concept envisioned in this thesis uses the wing dihedral angles for longitudinal and lateral-directional control. Aircraft with flexible articulated wings are also investigated. We derive a complete nonlinear model of the flight dynamics incorporating dynamic CG location and the changing moment of inertia. We show that symmetric dihedral configuration, along with a conventional horizontal tail, can be used to control flight speed and flight path angle independently of each other. This characteristic is very useful for initiating an efficient perching maneuver. It is shown that wing dihedral angles alone can effectively regulate sideslip during rapid turns and generate a wide range of equilibrium turn rates while maintaining a constant flight speed and regulating sideslip. We compute the turning performance limitations that arise due to the use of wing dihedral for yaw control

  15. High-Performance 3D Articulated Robot Display

    Science.gov (United States)

    Powell, Mark W.; Torres, Recaredo J.; Mittman, David S.; Kurien, James A.; Abramyan, Lucy

    2011-01-01

    In the domain of telerobotic operations, the primary challenge facing the operator is to understand the state of the robotic platform. One key aspect of understanding the state is to visualize the physical location and configuration of the platform. As there is a wide variety of mobile robots, the requirements for visualizing their configurations vary diversely across different platforms. There can also be diversity in the mechanical mobility, such as wheeled, tracked, or legged mobility over surfaces. Adaptable 3D articulated robot visualization software can accommodate a wide variety of robotic platforms and environments. The visualization has been used for surface, aerial, space, and water robotic vehicle visualization during field testing. It has been used to enable operations of wheeled and legged surface vehicles, and can be readily adapted to facilitate other mechanical mobility solutions. The 3D visualization can render an articulated 3D model of a robotic platform for any environment. Given the model, the software receives real-time telemetry from the avionics system onboard the vehicle and animates the robot visualization to reflect the telemetered physical state. This is used to track the position and attitude in real time to monitor the progress of the vehicle as it traverses its environment. It is also used to monitor the state of any or all articulated elements of the vehicle, such as arms, legs, or control surfaces. The visualization can also render other sorts of telemetered states visually, such as stress or strains that are measured by the avionics. Such data can be used to color or annotate the virtual vehicle to indicate nominal or off-nominal states during operation. The visualization is also able to render the simulated environment where the vehicle is operating. For surface and aerial vehicles, it can render the terrain under the vehicle as the avionics sends it location information (GPS, odometry, or star tracking), and locate the vehicle

  16. Crash problem definition and safety benefits methodology for stability control for single-unit medium and heavy trucks and large-platform buses

    Science.gov (United States)

    2009-10-01

    This report presents the findings of a comprehensive engineering analysis of electronic stability control (ESC) and roll stability control (RSC) systems for single-unit medium and heavy trucks and large-platform buses. This report details the applica...

  17. Flutter instability of freely hanging articulated pipes conveying fluid

    Science.gov (United States)

    Schouveiler, Lionel; Chermette, Félix

    2018-03-01

    We experimentally investigate the stability of freely hanging articulated pipes made of rigid segments connected by flexible joints and with their displacements constrained in a vertical plane. When the velocity of the fluid conveyed by the pipe is increased, flutter-type instability occurs above a critical value. The critical velocity and the characteristics of the flutter modes (frequency, amplitude, and shape) are determined as a function of the number n of segments into the pipe which is varied from 2 to 5. Experimental results are compared to predictions from linear stability analysis extending previous studies by taking into account damping due to the dissipation in the joints. Qualitative agreement is found and the limits of the analysis are discussed.

  18. Audio Logo Recognition, Reduced Articulation and Coding Orientation

    DEFF Research Database (Denmark)

    Bonde, Anders; Hansen, Allan Grutt

    2013-01-01

    In this paper we explore an interdisciplinary theoretical framework for the analysis of corporate audio logos and their effectiveness regarding recognisability and identification. This is done by combining three different academic disciplines: 1) social semiotics, 2) branding theory and 3) music...... on musicological descriptors. We consider as a starting point Kress and Van Leeuwen’s (1996, 2006) conceptualisation of ‘modality’, which is central to their ‘visual grammar’ theory and subsequently extended to auditory expressions such as spoken language, music and sound effects (Van Leeuwen, 1999). While...... connected to notions of brand recognisability and brand identification, thus resulting in the concept of ‘Reduced Articulation Form’ (RAF). The concept has been tested empirically through a survey of 137 upper secondary school students. On the basis of a conditioning experiment, manipulating five existing...

  19. Visual servo simulation of EAST articulated maintenance arm robot

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yang, E-mail: yangyang@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China); Song, Yuntao; Pan, Hongtao; Cheng, Yong; Feng, Hansheng [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China); Wu, Huapeng [Lappeenranta University of Technology, Skinnarilankatu 34, Lappeenranta (Finland)

    2016-03-15

    For the inspection and light-duty maintenance of the vacuum vessel in the EAST tokamak, a serial robot arm, called EAST articulated maintenance arm, is developed. Due to the 9-m-long cantilever arm, the large flexibility of the EAMA robot introduces a problem in the accurate positioning. This article presents an autonomous robot control to cope with the robot positioning problem, which is a visual servo approach in context of tile grasping for the EAMA robot. In the experiments, the proposed method was implemented in a simulation environment to position and track a target graphite tile with the EAMA robot. As a result, the proposed visual control scheme can successfully drive the EAMA robot to approach and track the target tile until the robot reaches the desired position. Furthermore, the functionality of the simulation software presented in this paper is proved to be suitable for the development of the robotic and computer vision application.

  20. Palatalization in English: An Articulation Problem for Turkish Teacher Trainees

    Directory of Open Access Journals (Sweden)

    Prof. Dr. Mehmet Demirezen

    2005-04-01

    Full Text Available In the field of teacher training, there is a scarcity of teaching pronunciation teachingmethodology to cure the fossilized mistakes of teacher trainees and foreign language teacherson-the-job. A case study pertaining to this situation is handled for the first time in this articleunder the title of “Audio-articulation Method” (Demirezen, 2003; Hişmanoğlu, 2004. Thismethod takes up a fossilized mistake of teacher trainees or teachers on-the-job in fifty minutesand brings in pronunciation correction by using tongue-twisters, idioms, proverbs, and thelike. Thus, it cures the fossilized mistake to a grater extent by creating a higher awareness andimproving communicative fluency. This method through task-based point of view removesthe related fossilized mistake and brings in pronunciation betterment to the teacher traineesand the teachers on-the-job.

  1. Three General Theoretical Models in Sociology: An Articulated ?(Disunity?

    Directory of Open Access Journals (Sweden)

    Thaís García-Pereiro

    2015-01-01

    Full Text Available After merely a brief, comparative reconstruction of the three most general theoretical models underlying contemporary Sociology (atomic, systemic, and fluid it becomes necessary to review the question about the unity or plurality of Sociology, which is the main objective of this paper. To do so, the basic terms of the question are firstly updated by following the hegemonic trends in current studies of science. Secondly the convergences and divergences among the three models discussed are shown. Following some additional discussion, the conclusion is reached that contemporary Sociology is not unitary, and need not be so. It is plural, but its plurality is limited and articulated by those very models. It may therefore be portrayed as integrated and commensurable, to the extent that a partial and unstable (disunity may be said to exist in Sociology, which is not too far off from what happens in the natural sciences.

  2. Sensory Integration with Articulated Motion on a Humanoid Robot

    Directory of Open Access Journals (Sweden)

    J. Rojas

    2005-01-01

    Full Text Available This paper describes the integration of articulated motion with auditory and visual sensory information that enables a humanoid robot to achieve certain reflex actions that mimic those of people. Reflexes such as reach-and-grasp behavior enables the robot to learn, through experience, its own state and that of the world. A humanoid robot with binaural audio input, stereo vision, and pneumatic arms and hands exhibited tightly coupled sensory-motor behaviors in four different demonstrations. The complexity of successive demonstrations was increased to show that the reflexive sensory-motor behaviors combine to perform increasingly complex tasks. The humanoid robot executed these tasks effectively and established the groundwork for the further development of hardware and software systems, sensory-motor vector-space representations, and coupling with higher-level cognition.

  3. Lightweight design of a vertical articulated robot using topology optimization

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Ki; Hong, Jung Ki; Jang, Gang Won [Sejong Univ., Seoul (Korea, Republic of); Kim, Tae Hyun; Park, Jin Kyun; Kim, Sang Hyun [Hyundai Heavy Industries Co., Ltd., Daejeon (Korea, Republic of)

    2012-12-15

    Topology optimization is applied for the lightweight design of three main parts of a vertical articulated robot: a base frame, a lower and a upper frame. Design domains for optimization are set as large solid regions that completely embrace the original parts, which are discretized by using three dimensional solid elements. Design variables are parameterized one to one to the material properties of each element by using the SIMP method. The objective of optimization is set as the multi objective form combining the natural frequencies and mean compliances of a structure for which load steps of interest are selected from the multibody dynamics analysis of a robot. The obtained results of topology optimization are post processed to designs favorable to manufacturability for casting process. The final optimized results are 11.0% (base frame), 12.0% (lower frame) and 10.0% (upper frame) lighter with similar or even higher static and dynamic stiffnesses than the original models.

  4. Articulated pipes conveying fluid pulsating with high frequency

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard

    1999-01-01

    Stability and nonlinear dynamics of two articulated pipes conveying fluid with a high-frequency pulsating component is investigated. The non-autonomous model equations are converted into autonomous equations by approximating the fast excitation terms with slowly varying terms. The downward hanging...... pipe position will lose stability if the mean flow speed exceeds a certain critical value. Adding a pulsating component to the fluid flow is shown to stabilize the hanging position for high values of the ratio between fluid and pipe-mass, and to marginally destabilize this position for low ratios....... An approximate nonlinear solution for small-amplitude flutter oscillations is obtained using a fifth-order multiple scales perturbation method, and large-amplitude oscillations are examined by numerical integration of the autonomous model equations, using a path-following algorithm. The pulsating fluid component...

  5. Visual servo simulation of EAST articulated maintenance arm robot

    International Nuclear Information System (INIS)

    Yang, Yang; Song, Yuntao; Pan, Hongtao; Cheng, Yong; Feng, Hansheng; Wu, Huapeng

    2016-01-01

    For the inspection and light-duty maintenance of the vacuum vessel in the EAST tokamak, a serial robot arm, called EAST articulated maintenance arm, is developed. Due to the 9-m-long cantilever arm, the large flexibility of the EAMA robot introduces a problem in the accurate positioning. This article presents an autonomous robot control to cope with the robot positioning problem, which is a visual servo approach in context of tile grasping for the EAMA robot. In the experiments, the proposed method was implemented in a simulation environment to position and track a target graphite tile with the EAMA robot. As a result, the proposed visual control scheme can successfully drive the EAMA robot to approach and track the target tile until the robot reaches the desired position. Furthermore, the functionality of the simulation software presented in this paper is proved to be suitable for the development of the robotic and computer vision application.

  6. Unregulated emissions from compressed natural gas (CNG) transit buses configured with and without oxidation catalyst.

    Science.gov (United States)

    Okamoto, Robert A; Kado, Norman Y; Kuzmicky, Paul A; Ayala, Alberto; Kobayashi, Reiko

    2006-01-01

    The unregulated emissions from two in-use heavy-duty transit buses fueled by compressed natural gas (CNG) and equipped with oxidation catalyst (OxiCat) control were evaluated. We tested emissions from a transit bus powered by a 2001 Cummins Westport C Gas Plus 8.3-L engine (CWest), which meets the California Air Resources Board's (CARB) 2002 optional NOx standard (2.0 g/bhp-hr). In California, this engine is certified only with an OxiCat, so our study did not include emissions testing without it. We also tested a 2000 New Flyer 40-passenger low-floor bus powered by a Detroit Diesel series 50G engine (DDCs50G) that is currently certified in California without an OxiCat. The original equipment manufacturer (OEM) offers a "low-emission" package for this bus that includes an OxiCat for transit bus applications, thus, this configuration was also tested in this study. Previously, we reported that formaldehyde and other volatile organic emissions detected in the exhaust of the DDCs50G bus equipped with an OxiCat were significantly reduced relative to the same DDCs50G bus without OxiCat. In this paper, we examine othertoxic unregulated emissions of significance. The specific mutagenic activity of emission sample extracts was examined using the microsuspension assay. The total mutagenic activity of emissions (activity per mile) from the OxiCat-equipped DDC bus was generally lower than that from the DDC bus without the OxiCat. The CWest bus emission samples had mutagenic activity that was comparable to that of the OxiCat-equipped DDC bus. In general, polycyclic aromatic hydrocarbon (PAH) emissions were lower forthe OxiCat-equipped buses, with greater reductions observed for the volatile and semivolatile PAH emissions. Elemental carbon (EC) was detected in the exhaust from the all three bus configurations, and we found that the total carbon (TC) composition of particulate matter (PM) emissions was primarily organic carbon (OC). The amount of carbon emissions far exceeded the

  7. Hybrid vehicles - an alternative for the Swedish market; Hybridfordon - ett alternativ foer den svenska bilparken

    Energy Technology Data Exchange (ETDEWEB)

    Egebaeck, Karl-Erik; Bucksch, S

    2000-06-01

    The object of this report is to assemble information on and describe the situation for the development of hybrid vehicles and various alternatives within this field of development. In the report the description is concentrated mainly on the combination of combustion engine and electric battery, which is the most common combination in present day hybrid vehicles. In order to take a glimpse into the future even the combination of fuel cells and electric battery is described. The light duty electric hybrid vehicles which have been developed up to now are mainly parallel hybrids. If the development of hybrid systems takes place it will most certainly concern light duty vehicles which will come to be parallel hybrids equipped with an Otto or a diesel engine, depending on what the manufacturers wish to back. In the report the use of series hybrid vehicles is estimated to be limited to heavy-duty hybrid vehicles. Hybrids will not be likely to be relevant for heavy-duty vehicles, with the exception of those lorries which operate in city centres, i.e. lorries which are used to distribute goods to shops, garbage vehicles and certain types of working vehicle for service purposes. Continued development of the hybrid system for buses seems uncertain for various reasons. If there is a technical breakthrough in the manufacture of batteries and simultaneously the manufacturers increase their efforts to develop hybrid vehicles, the situation can be changed so that there is a speedier introduction of hybrid vehicles for heavy-duty vehicles.

  8. Impact of Spanish electricity mix, over the period 2008–2030, on the Life Cycle energy consumption and GHG emissions of Electric, Hybrid Diesel-Electric, Fuel Cell Hybrid and Diesel Bus of the Madrid Transportation System

    International Nuclear Information System (INIS)

    García Sánchez, Juan Antonio; López Martínez, José María; Lumbreras Martín, Julio; Flores Holgado, María Nuria; Aguilar Morales, Hansel

    2013-01-01

    Highlights: • We assess the performance of 4 buses that run on different alternative fuel types and technologies. • The buses assessed are Fuel Cell-Hybrid Bus, Hybrid Diesel-Electric Bus, Battery Electric Bus, and a Diesel Bus. • We examine the environmental impact caused by the Life Cycle of each vehicle technology, fossil fuel and energy carrier. • Life Cycle of Battery Electric Bus shows that it has a big potential of improvement in terms of environmental impact. - Abstract: In spite of the advanced research in automotive technology, and the improvement of fuels, the road transport sector continues to be an environmental concern, since the increase in transport demand is offsetting the effects of these technological improvements. Therefore, this poses the following question: what combination of technology and fuel is more efficient in terms of energy consumption and green house gas (GHG) emissions? To fully address this question it is necessary to carry out a Life Cycle Assessment (LCA). This paper presents a global LCA of 4 buses that run on the following fuel types and technologies: (1) Fuel Cell- Hybrid Bus, (2) Hybrid Diesel-Electric Bus (series configuration), (3) Battery Electric Bus and (4) Combustion Ignition Engine Bus. The impact categories assessed are: primary energy consumption, fossil energy and GHG emissions. Among the principal results, we can conclude that the Global LCA of buses (3) and (1) (which are the more sensitive pathways to the electricity mix variation) have for the 2008–2030 period a room for improvement of 25.62% and 28.16% in terms of efficiency of fossil energy consumption and a potential GHG emission reduction of 28.70% and 30.88% respectively

  9. Ultrafine particle emissions by in-use diesel buses of various generations at low-load regimes

    Science.gov (United States)

    Tartakovsky, L.; Baibikov, V.; Comte, P.; Czerwinski, J.; Mayer, A.; Veinblat, M.; Zimmerli, Y.

    2015-04-01

    Ultrafine particles (UFP) are major contributors to air pollution due to their easy gas-like penetration into the human organism, causing adverse health effects. This study analyzes UFP emissions by buses of different technologies (from Euro II till Euro V EEV - Enhanced Environmentally-friendly Vehicle) at low-load regimes. Additionally, the emission-reduction potential of retrofitting with a diesel particle filter (DPF) is demonstrated. A comparison of the measured, engine-out, particle number concentrations (PNC) for buses of different technological generations shows that no substantial reduction of engine-out emissions at low-load operating modes is observed for newer bus generations. Retrofitting the in-use urban and interurban buses of Euro II till Euro IV technologies by the VERT-certified DPF confirmed its high efficiency in reduction of UFP emissions. Particle-count filtration efficiency values of the retrofit DPF were found to be extremely high - greater than 99.8%, similar to that of the OEM filter in the Euro V bus.

  10. High Re-Operation Rates Using Conserve Metal-On-Metal Total Hip Articulations

    DEFF Research Database (Denmark)

    Mogensen, S L; Jakobsen, Thomas; Christoffersen, Hardy

    2016-01-01

    INTRODUCTION: Metal-on-metal hip articulations have been intensely debated after reports of adverse reactions and high failure rates. The aim of this study was to retrospectively evaluate the implant of a metal-on.metal total hip articulation (MOM THA) from a single manufacture in a two-center st......INTRODUCTION: Metal-on-metal hip articulations have been intensely debated after reports of adverse reactions and high failure rates. The aim of this study was to retrospectively evaluate the implant of a metal-on.metal total hip articulation (MOM THA) from a single manufacture in a two...

  11. “Bus Lane Within The Area Of Intersection” Method For Buses Priority On The Intersections

    Directory of Open Access Journals (Sweden)

    Vikovych Ihor

    2015-12-01

    Full Text Available The primary objective of this article is to formalize the “special bus lanes within the area of intersection” method that allows providing buses with space-time priority at signalized intersections (mostly of the isolated type, including those with no more than two traffic lanes in each direction at the approaches to the intersection. The article establishes the limits for efficient application of this method, and describes the results of a simulation experiment conducted in the VISSIM environment to investigate the functioning of the method on an actual intersection. The most critical phase of implementation of this method is to determine the optimum length of the special bus lane at the approach to the intersection. The optimum length of special bus lanes at the approaches to isolated or coordinated intersections is determined based on the maximum length of queued vehicles which is computed using the simulation models developed in the Objective-C language. The article covers the basic characteristics of those models, their structure and building principles, and also provides the model validation results. Simulation models can be used both for determination of the optimum length of special bus lanes at the approaches to signalized intersections and for analysis of intersection performance based on the maximum length of queued vehicles.

  12. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2017

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew B [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-11-21

    This report, published annually, summarizes the progress of fuel cell electric bus (FCEB) development in the United States and discusses the achievements and challenges of introducing fuel cell propulsion in transit. The report provides a summary of results from evaluations performed by the National Renewable Energy Laboratory. This annual status report combines results from all FCEB demonstrations, tracks the progress of the FCEB industry toward meeting technical targets, documents the lessons learned, and discusses the path forward for commercial viability of fuel cell technology for transit buses. These data and analyses help provide needed information to guide future early-stage research and development. The 2017 summary results primarily focus on the most recent year for each demonstration, from August 2016 through July 2017. The primary results presented in the report are from five demonstrations of two different fuel-cell-dominant bus designs: Zero Emission Bay Area Demonstration Group led by Alameda-Contra Costa Transit District (AC Transit) in California; American Fuel Cell Bus (AFCB) Project at SunLine Transit Agency in California; AFCB Project at the University of California at Irvine; AFCB Project at Orange County Transportation Authority; and AFCB Project at Massachusetts Bay Transportation Authority.

  13. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2016

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jeffers, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    This report, published annually, summarizes the progress of fuel cell electric bus development in the United States and discusses the achievements and challenges of introducing fuel cell propulsion in transit. The report provides a summary of results from evaluations performed by the National Renewable Energy Laboratory. Funding for this effort is provided by the U.S. Department of Energy's Fuel Cell Technologies Office within the Office of Energy Efficiency and Renewable Energy and by the U.S. Department of Transportation's Federal Transit Administration. The 2016 summary results primarily focus on the most recent year for each demonstration, from August 2015 through July 2016. The results for these buses account for more than 550,000 miles traveled and 59,500 hours of fuel cell power system operation. The primary results presented in the report are from three demonstrations of two different fuel-cell-dominant bus designs: Zero Emission Bay Area Demonstration Group led by Alameda-Contra Costa Transit District (AC Transit) in California; American Fuel Cell Bus Project at SunLine Transit Agency in California; and American Fuel Cell Bus Project at the University of California at Irvine.

  14. A Model for the Stop Planning and Timetables of Customized Buses.

    Directory of Open Access Journals (Sweden)

    Jihui Ma

    Full Text Available Customized buses (CBs are a new mode of public transportation and an important part of diversified public transportation, providing advanced, attractive and user-led service. The operational activity of a CB is planned by aggregating space-time demand and similar passenger travel demands. Based on an analysis of domestic and international research and the current development of CBs in China and considering passenger travel data, this paper studies the problems associated with the operation of CBs, such as stop selection, line planning and timetables, and establishes a model for the stop planning and timetables of CBs. The improved immune genetic algorithm (IIGA is used to solve the model with regard to the following: 1 multiple population design and transport operator design, 2 memory library design, 3 mutation probability design and crossover probability design, and 4 the fitness calculation of the gene segment. Finally, a real-world example in Beijing is calculated, and the model and solution results are verified and analyzed. The results illustrate that the IIGA solves the model and is superior to the basic genetic algorithm in terms of the number of passengers, travel time, average passenger travel time, average passenger arrival time ahead of schedule and total line revenue. This study covers the key issues involving operational systems of CBs, combines theoretical research and empirical analysis, and provides a theoretical foundation for the planning and operation of CBs.

  15. Accuracy of two face-bow/semi-adjustable articulator systems in transferring the maxillary occlusal cant

    Directory of Open Access Journals (Sweden)

    Nazia Nazir

    2012-01-01

    Full Text Available Context: The precision of an arbitrary face-bow in accurately transferring the orientation of the maxillary cast to the articulator has been questioned because the maxillary cast is mounted in relation to arbitrary measurements and anatomic landmarks that vary among individuals. Aim: This study was intended to evaluate the sagittal inclination of mounted maxillary casts on two semi-adjustable articulator/face-bow systems in comparison to the occlusal cant on lateral cephalograms. Materials and Methods: Maxillary casts were mounted on the Hanau and Girrbach semi-adjustable articulators following face-bow transfer with their respective face-bows. The sagittal inclination of these casts was measured in relation to the fixed horizontal reference plane using physical measurements. Occlusal cant was measured on lateral cephalograms. SPSS software (version 11.0, Chicago, IL, USA was used for statistical analysis. Repeated measures analysis of variance and Tukey′s tests were used to evaluate the results (P < 0.05. Results: Comparison of the occlusal cant on the articulators and cephalogram revealed statistically significant differences. Occlusal plane was steeper on Girrbach Artex articulator in comparison to the Hanau articulator. Conclusion: Within the limitations of this study, it was found that the sagittal inclination of the mounted maxillary cast achieved with Hanau articulator was closer to the cephalometric occlusal cant as compared to that of the Girrbach articulator. Among the two articulators and face-bow systems, the steepness of sagittal inclination was greater on Girrbach semi-adjustable articulator. Different face-bow/articulator systems could result in different orientation of the maxillary cast, resulting in variation in stability, cuspal inclines and cuspal heights.

  16. Accuracy of two face-bow/semi-adjustable articulator systems in transferring the maxillary occlusal cant.

    Science.gov (United States)

    Nazir, Nazia; Sujesh, M; Kumar, Ravi; Sreenivas, P

    2012-01-01

    The precision of an arbitrary face-bow in accurately transferring the orientation of the maxillary cast to the articulator has been questioned because the maxillary cast is mounted in relation to arbitrary measurements and anatomic landmarks that vary among individuals. This study was intended to evaluate the sagittal inclination of mounted maxillary casts on two semi-adjustable articulator/face-bow systems in comparison to the occlusal cant on lateral cephalograms. Maxillary casts were mounted on the Hanau and Girrbach semi-adjustable articulators following face-bow transfer with their respective face-bows. The sagittal inclination of these casts was measured in relation to the fixed horizontal reference plane using physical measurements. Occlusal cant was measured on lateral cephalograms. SPSS software (version 11.0, Chicago, IL, USA) was used for statistical analysis. Repeated measures analysis of variance and Tukey's tests were used to evaluate the results (P occlusal cant on the articulators and cephalogram revealed statistically significant differences. Occlusal plane was steeper on Girrbach Artex articulator in comparison to the Hanau articulator. Within the limitations of this study, it was found that the sagittal inclination of the mounted maxillary cast achieved with Hanau articulator was closer to the cephalometric occlusal cant as compared to that of the Girrbach articulator. Among the two articulators and face-bow systems, the steepness of sagittal inclination was greater on Girrbach semi-adjustable articulator. Different face-bow/articulator systems could result in different orientation of the maxillary cast, resulting in variation in stability, cuspal inclines and cuspal heights.

  17. Effects of Photovoltaic and Fuel Cell Hybrid System on Distribution Network Considering the Voltage Limits

    Directory of Open Access Journals (Sweden)

    ABYANEH, H. A.

    2010-11-01

    Full Text Available Development of distribution network and power consumption growth, increase voltage drop on the line impedance and therefore voltage drop in system buses. In some cases consumption is so high that voltage in some buses exceed from standard. In this paper, effect of the fuel cell and photovoltaic hybrid system on distribution network for solving expressed problem is studied. For determining the capacity of each distributed generation source, voltage limitation on the bus voltages under different conditions is considered. Simulation is done by using DIgSILENT software on the part of the 20 kV real life Sirjan distribution system. In this article, optimum location with regard to system and environmental conditions are studied in two different viewpoints.

  18. Application of ECS to a hybrid automobile; `ECS` no hybrid jidosha eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, M.; Okamura, T.

    1997-01-30

    This paper describes a simulation for a case when an energy capacitor system (ECS) is mounted in a hybrid electric vehicle in place of secondary batteries. The ECS is electric power storage equipment consisted of capacitors and electronic circuits, and capable of quick charge and discharge at high efficiency. Its energy density per unit weight is about the same as lead-acid batteries, but its output density is greater than any type of batteries. Being free of deterioration due to charge and discharge, its cycle life is almost limitless. In order to suppress heat generation, a switching converter is used to control the output to about 300W. However, internal resistance of an ECS is smaller than in an equivalent secondary battery, and internal loss and heat generation stay as low as 1/5 to 1/10. Discussions have been given on cases of using the ECS in small passenger cars, small buses/trucks, and large buses. Since the ECS can use the stored power to about 94% of the capacity, and its cycle life is sufficiently long, it can operate with charge capacity as small as 1/4 of a lead-acid battery. The weight can also be reduced largely. Regenerative power storage efficiency is high, fuel consumption can be improved, heat generation is less, and no forced cooling is required. 9 refs., 4 figs., 1 tab.

  19. Sectoral demand articulation : The case of emerging sensor technologies in the drinking water sector

    NARCIS (Netherlands)

    te Kulve, Haico; Konrad, Kornelia Elke

    Demand articulation plays a central role in innovation processes as it reduces uncertainties for innovating firms and offers guidance in innovation processes. Studies into demand articulation processes have mostly focused on users and user-producer interactions and paid less attention to the role of

  20. Effects of Articulation Styles on Perception of Modulated Tempos in Violin Excerpts

    Science.gov (United States)

    Geringer, John M.; Madsen, Clifford K.; Macleod, Rebecca B.

    2007-01-01

    We investigated effects of legato, staccato and pizzicato articulation styles on the perception of modulated tempos. Seventy-two music majors served as participants. Two solo violin excerpts were chosen with contrasting rhythmic rates and were recorded in all three articulation styles. Examples were presented to listeners in three conditions of…

  1. Demanding Dynamics - Demand articulation of intermediary organisations in emerging pharmaceutical innovations

    NARCIS (Netherlands)

    Boon, W.P.C.

    2008-01-01

    User involvement in emerging technological fields is carried by so-called demand articulation processes. These demand articulation processes are interactive learning processes in which stakeholders try to address what they perceive as important characteristics of, and to unravel preferences for an

  2. Articulation and Noncomprehension Signaling in Adolescent and Adult Males with Down Syndrome and Fragile X Syndrome

    Science.gov (United States)

    Fedak, Larissa Ann

    2012-01-01

    The purpose of this study was to determine whether or not decreased articulation of speech played a role in the ability of an individual with Down syndrome or Fragile X syndrome to signal noncomprehension and whether the two groups differed in their levels of articulation of speech and noncomprehension signaling ability. The research was conducted…

  3. School buses, air pollution and children's health : improving children's health and local air quality by reducing school bus emissions

    Energy Technology Data Exchange (ETDEWEB)

    Perrotta, K. [Ontario Public Health Association, Toronto, ON (Canada)

    2005-11-01

    The exhaust gases from school buses was examined and recommendations were presented for the establishment of a healthy school bus program in Ontario that is directed at improving children's health and local air quality. The Ontario Public Health Association is concerned with school bus emissions because they are heavy-duty vehicles that emit large quantities of diesel-related air pollutants such as fine particulate matter, nitrogen oxides and diesel particulates. In addition, school buses can be self-polluting vehicles that expose children on-board to high levels of fine particulates and diesel particulate matter. Both these pollutants have been associated with a range of acute and chronic health problems such as asthma, respiratory infections, allergies, and school absences. With nearly 800,000 Ontario children being transported on school buses annually, these exposures can represent a serious public health concern, as childhood exposures can also influence the health of exposed individuals later in life. Exposure studies have found that tailpipe and engine emissions contribute greatly to concentrations of air pollutants on-board school buses. The studies also showed that on-board concentrations were also influenced by local air quality in the communities studied, traffic density, wind direction, the configuration of windows, idling and queuing patterns. It was recommended that the use of ultra-low sulphur diesel fuel along with the installation of diesel particulate filters and closed crankcase filters can reduce the concentrations of air pollutants on-board school buses to almost ambient air levels, even under idling conditions. This report recommended the replacement of pre-1994 school buses, the retrofitting of 1994-2003 school buses with filters, and maintaining proper maintenance, idling and vehicle operation practices. refs., tabs., figs.

  4. Design and fabrication of an articulated four axes microrobot arm

    Science.gov (United States)

    Zhang, Ruoshi; Yang, Zhong; Wei, Danming; Popa, Dan O.

    2017-05-01

    In order to carry out nanomanufacturing tasks, a microrobot requires both high precision and high reliability over prolonged periods of time. Articulated Four-Axis Microrobots (AFAM) have been introduced a decade ago as millimetric microrobots capable of carrying out nanoscale tasks. The original robot design relied on a Micro Electro Mechanical (MEMS) actuator bank positioned onto a Silicon substrate, and an assembled arm mechanically coupled to the actuators through a cable. Movement of two thermal actuator banks positions the AFAM's end effector in 3-Dimensional space with approximately 75 microns workspace and 50 nm repeatability. However, failure of the AFAM's cable mechanism was observed after less than 1 million cycles. In this paper, we propose a novel arm mechanism for AFAM that improve its performance. The design presented in this article substitutes the "wire-gluing" cable with an anchored electrostatic actuator, and therefore it simplifies assembly requirements, reduces overall footprint of the microrobot, and achieves higher operating frequency. Simulation results are presented for a rotary electrostatic comb drive as basis for the microrobot arm with overall dimensions of 2 mm × 2 mm. The AFAM arm cantilever is 1 mm long to achieve a workspace of dimension of 75 microns along the vertical axis. Experimental evaluation of the design was accomplished using a prototype fabricated on a silicon on insulator (SOI) wafer processed with the deep reactive ion etching (DRIE) process.

  5. Articulated dental cast analysis of asymptomatic and symptomatic populations

    Science.gov (United States)

    Cordray, Frank E

    2016-01-01

    Dental instrumentation has long provided insight into the mechanism of musculo-skeletal function of the gnathic system. While large population studies associate dental arch displacement (DAD), especially laterally, with symptoms, mandibular condyle displacement (CD) resulting from DAD has not been targeted as possibly etiologic in the production of common muscle contraction headache (CMCH) and temporo-mandibular dysfunction (TMD). The objective was to evaluate the three-dimensional nature of DAD and CD between the seated condylar position (SCP) and the intercuspal position (ICP) and to compare results derived from large deprogrammed asymptomatic and symptomatic populations. A total of 1 192 sets of dental casts collected from asymptomatic and symptomatic populations were articulated in the SCP. The initial occlusal contact, DAD, and condylar displacement were evaluated for frequency, direction, and magnitude of displacement between the SCP and ICP. The data revealed significant displacement between the SCP and ICP of the condyles (displaced most frequently inferior (down) and posterior (distal)) and substantially increased frequency and magnitude of displacement of the dental arches (with posterior premature occlusal contacts, increased overjet, decreased overbite, midline differences, and occlusal classification changes) in symptomatic subjects. These discrepancies were statistically significant and clinically significant. The data support the concept of increased DAD and CD with dysfunction. Transverse condylar displacement, commonly presenting with dental cross bite, may be associated with CMCH and TMD. Displacement of the mandibular condyle may be an etiologic factor in CMCH and dysfunction of the temporo-mandibular joint. PMID:27357324

  6. Simulated Energy Usage for a Novel 6 DOF Articulated Robot

    International Nuclear Information System (INIS)

    Shaik, A A; Tlale, N; Bright, G

    2014-01-01

    The serial robot architecture is widespread in modern day manufacturing, and over the last few decades the technology has matured and settled to its current state. One drawback from the architecture however is the location of motors and gearboxes which are either at the joint it controls or close by. A novel hybrid 6 DOF robot was designed to move all the actuators to the robot base, and to control the desired axis through a set of connected links and gears, while maintaining the same workspace and dexterity. This would reduce the inertia of the movable part of the robot and some of the moment arms on the 3 axes required for translation of the 3 DOF spherical wrist. Doing so would decrease the energy requirements when compared to a 6 DOF serial robot. This paper focuses on the mathematical modelling and simulation of the novel hybrid machine design and compares it to an equivalent serial robot

  7. Evaluation of articulation of Turkish phonemes after removable partial denture application

    Directory of Open Access Journals (Sweden)

    Özbeki Murat

    2003-01-01

    Full Text Available In this study, the adaptation of patients to removable partial dentures was evaluated related to articulation of Turkish phonemes. Articulation of /t,d,n,l,r/, /g,k/, /b,p,m/ and /s,z,Õ,v,f,y,j,h,c/ phonemes were evaluated by three speech pathologists, on records taken from 15 patients before the insertion of a removable partial denture, just after insertion, and one week later. The test consisted of evaluation of phoneme articulation of independent syllables in terms of distortion, omission, substitution, mass effect, hypernasality and hyponasality. Data were evaluated with Cochrane Q, McNemar and Kruskal-Wallis tests. The results showed that for some phonemes, problems in articulation occurred after the insertion of a removable partial denture while for others a significant amelioration was observed after the insertion of a removable partial denture. In general, problems in articulation of evaluated phonemes were resolved after one week of use.

  8. MyReDiary: Co-Designing for Collaborative Articulation in Physical Rehabilitation

    DEFF Research Database (Denmark)

    Bagalkot, Naveen L.; Sokoler, Tomas

    2011-01-01

    In this paper we present our exploration of co-designing for supporting a collaborative articulation of rehabilitation process. Based on our reading of key CSCW literature, we describe three facets of a collaboratively articulated rehab process: Interdependence, Distributed Process, and Interoper......In this paper we present our exploration of co-designing for supporting a collaborative articulation of rehabilitation process. Based on our reading of key CSCW literature, we describe three facets of a collaboratively articulated rehab process: Interdependence, Distributed Process......, and Interoperability. We highlight Magic-Mirror- Spiral, the design ideal guiding the co-designing of MyReDiary that is aimed to support the three facets as an example in this regard. We offer the conceptual understanding of Collaborative Articulation, the Magic-Mirror-Spiral and MyReDiary as a ‘compositional Whole...

  9. The (in)dependence of articulation and lexical planning during isolated word production.

    Science.gov (United States)

    Buz, Esteban; Jaeger, T Florian

    The number of phonological neighbors to a word (PND) can affect its lexical planning and pronunciation. Similar parallel effects on planning and articulation have been observed for other lexical variables, such as a word's contextual predictability. Such parallelism is frequently taken to indicate that effects on articulation are mediated by effects on the time course of lexical planning. We test this mediation assumption for PND and find it unsupported. In a picture naming experiment, we measure speech onset latencies (planning), word durations, and vowel dispersion (articulation). We find that PND predicts both latencies and durations. Further, latencies predict durations. However, the effects of PND and latency on duration are independent: parallel effects do not imply mediation. We discuss the consequences for accounts of lexical planning, articulation, and the link between them. In particular, our results suggest that ease of planning does not explain effects of PND on articulation.

  10. A Novel Methodology to Validate the Accuracy of Extraoral Dental Scanners and Digital Articulation Systems.

    Science.gov (United States)

    Ellakwa, A; Elnajar, S; Littlefair, D; Sara, G

    2018-05-03

    The aim of the current study is to develop a novel method to investigate the accuracy of 3D scanners and digital articulation systems. An upper and a lower poured stone model were created by taking impression of fully dentate male (fifty years old) participant. Titanium spheres were added to the models to allow for an easily recognisable geometric shape for measurement after scanning and digital articulation. Measurements were obtained using a Coordinate Measuring Machine to record volumetric error, articulation error and clinical effect error. Three scanners were compared, including the Imetric 3D iScan d104i, Shining 3D AutoScan-DS100 and 3Shape D800, as well as their respective digital articulation software packages. Stoneglass Industries PDC digital articulation system was also applied to the Imetric scans for comparison with the CMM measurements. All the scans displayed low volumetric error (p⟩0.05), indicating that the scanners themselves had a minor contribution to the articulation and clinical effect errors. The PDC digital articulation system was found to deliver the lowest average errors, with good repeatability of results. The new measuring technique in the current study was able to assess the scanning and articulation accuracy of the four systems investigated. The PDC digital articulation system using Imetric scans was recommended as it displayed the lowest articulation error and clinical effect error with good repeatability. The low errors from the PDC system may have been due to its use of a 3D axis for alignment rather than the use of a best fit. Copyright© 2018 Dennis Barber Ltd.

  11. Evaluation of retrofit crankcase ventilation controls and diesel oxidation catalysts for reducing air pollution in school buses

    Science.gov (United States)

    Trenbath, Kim; Hannigan, Michael P.; Milford, Jana B.

    2009-12-01

    This study evaluates the effect of retrofit closed crankcase ventilation filters (CCFs) and diesel oxidation catalysts (DOCs) on the in-cabin air quality in transit-style diesel school buses. In-cabin pollution levels were measured on three buses from the Pueblo, CO District 70 fleet. Monitoring was conducted while buses were driven along their regular routes, with each bus tested three times before and three times after installation of control devices. Ultrafine number concentrations in the school bus cabins were 33-41% lower, on average, after the control devices were installed. Mean mass concentrations of particulate matter less than 2.5 μm in diameter (PM2.5) were 56% lower, organic carbon (OC) 41% lower, elemental carbon (EC) 85% lower, and formaldehyde 32% lower after control devices were installed. While carbon monoxide concentrations were low in all tests, mean concentrations were higher after control devices were installed than in pre-retrofit tests. Reductions in number, OC, and formaldehyde concentrations were statistically significant, but reductions in PM2.5 mass were not. Even with control devices installed, during some runs PM2.5 and OC concentrations in the bus cabins were elevated compared to ambient concentrations observed in the area. OC concentrations inside the bus cabins ranged from 22 to 58 μg m -3 before and 13 to 33 μg m -3 after control devices were installed. OC concentrations were correlated with particle-bound organic tracers for lubricating oil emissions (hopanes) and diesel fuel and tailpipe emissions (polycyclic aromatic hydrocarbons (PAH) and aliphatic hydrocarbons). Mean concentrations of hopanes, PAH, and aliphatic hydrocarbons were lower by 37, 50, and 43%, respectively, after the control devices were installed, suggesting that both CCFs and DOCs were effective at reducing in-cabin OC concentrations.

  12. Massachusetts Fuel Cell Bus Project: Demonstrating a Total Transit Solution for Fuel Cell Electric Buses in Boston

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-22

    The Federal Transit Administration's National Fuel Cell Bus Program focuses on developing commercially viable fuel cell bus technologies. Nuvera is leading the Massachusetts Fuel Cell Bus project to demonstrate a complete transit solution for fuel cell electric buses that includes one bus and an on-site hydrogen generation station for the Massachusetts Bay Transportation Authority (MBTA). A team consisting of ElDorado National, BAE Systems, and Ballard Power Systems built the fuel cell electric bus, and Nuvera is providing its PowerTap on-site hydrogen generator to provide fuel for the bus.

  13. Itinerant vending of medicines inside buses in Nigeria: vending strategies, dominant themes and medicine-related information provided.

    Science.gov (United States)

    Yusuff, Kazeem B; Wassi Sanni, Abd'

    2011-07-01

    To determine vending strategies and marketing themes employed by itinerant bus vendors, and assess the accuracy and completeness of information provided on medicines being sold in an urban setting in Nigeria. Cross-sectional study and content analysis of itinerant vending of medicines inside buses recorded with a mobile telephone on purposively selected routes in a mega city with an estimated 18 million residents in southwestern Nigeria over a 2-month period. Two coders independently assessed 192 vending episodes by 56 vendors for 147 OTC and prescription medicines. Inter-rater reliability (Gwet AC1 =0.924; p<0.0001). Fourteen thousands and four hundred potential consumers encountered 192 recorded episodes of vending of medicines inside 192 buses within the study periods. Forty-four (78•5%) of the 56 vendors were females in the 30-45 years age bracket, were mostly (75%) attired in the local 'Iro and Buba' Ankara fabric and showed laminated identity cards (97.5%) issued by the local association for 'marketers' of medicines inside buses, markets, and motor parks. Of the 14400 consumers encountered inside buses during the study period, between 6.7% and 48.3% purchased the medicines promoted. Prayers against death from road traffic accidents and diseases of physical and / or meta-physical origins were the most frequently used (76•8%) ice-breaking opening statement / strategy to gain consumers' attention. Hematinics, multi-vitamins, simple analgesic, NSAIDs and corticosteroids were the most frequently vended medicines. Consumers' enquiries were related to dosing for children (51.8%), elderly (28.6%), and pregnancy (52.7%); and contra-indications during pregnancy (8.9%). Factual medicines information such as dose, frequency, potential side effects and contra-indications were not provided in majority of vending episodes. Itinerant vending of medicines and the use of misleading and melodramatic themes to secure high consumer patronage appear considerable in Nigeria

  14. Efficiency improvement of transport service by trolley buses based on the levels of their power demand

    Directory of Open Access Journals (Sweden)

    V. V. Aulin

    2014-12-01

    Full Text Available Purpose. Use efficiency improvement of trolley buses in passenger traffic based on power levels of electric energy input and terms adjustment of their maintenance. Methodology. In order to achieve this goal conformance of electric energy input by trolleybus to the transported amount of passengers taking into account characteristics of the route is offered to establish. The major indicators of the trolleybus operation are: speed of a race on lines, number of tractive motor firing, voltage and amperage in the network that were taken with accountants from a dashboard. Research results were tabulated and recorded with DVR. Along with the study of power consumption of electric energy input by a trolleybus passenger count was carried out too. Findings. The directly proportional dependence between the level of energy consumption by a trolleybus and the number of passengers for constant performance route was determined. Originality. As the criteria for evaluating the effectiveness of the trolleybus operation on the route is proposed to use the ratio between electricity consumption and number of passengers for these characteristics of the route. This is confirmed experimentally. The obtained formulas give the possibility to balance the force work and consequently the volume of energy consumption during the trolleybus movement on the rise and the descent. Practical value. The proposed criterion can be used to adjust the terms of maintenance on the individual program, that means individual maintenance (IM. Type of work performed at the IM should be determined on the basis of diagnostic data of the vehicle (V. The principles of IM were formulated: 1 the primary task is planned and preventative strategy to identify and eliminate troubleshooting and technical actions; 2 operational control of the vehicle (V technical condition on the basis of prediction of its state using the proposed criteria, that takes into account the dependence of power consumption to

  15. Why People Are Not Willing to Let Their Children Ride in Driverless School Buses: A Gender and Nationality Comparison

    Directory of Open Access Journals (Sweden)

    Emily C. Anania

    2018-02-01

    Full Text Available As driverless vehicles proliferate, it is possible that this technology will be applied in mass transport vehicles. School buses may be suited for autonomous operations as they follow set routes and schedules. However, a research gap exists in whether or not parents would be willing to have their children ride in autonomously operated school buses. The purpose of this study was to examine parents’ willingness to allow their child to ride in an autonomous school bus. Participant gender and nationality were also two independent variables, along with affect measures as a possible mediating variable. The research used a two-study approach. In study one, it was found that participants were less willing to have their child ride in a driverless school bus than a traditional human-operated vehicle. In study two, findings suggest a significant interaction between the type of driver, participant gender, and nationality. In general, American females were less willing than Indian females and overall, Americans were less willing than Indians in the driverless conditions. Affect was found to be a mediating variable, which suggests that emotions were playing a role in the responses of participants. The paper concludes with theoretical contributions, practical applications, and suggestions for future research.

  16. Technical evaluation report on the 120 Vac vital instrument buses and inverter Technical Specifications Issue B71

    International Nuclear Information System (INIS)

    St Leger-Barter, G.; White, R.L.

    1982-01-01

    The operation of a Pressurized Water Reactor (PWR) with one of its 120 Vac vital buses energized in an off-normal mode was analyzed. A Probabilistic Risk Assessment was made to determine the increment of risk by energizing a vital bus from an off-site source directly vs energizing it from its normal, uninterruptible source (i.e., a battery/inverter arrangement). The calculations were made based on uninterruptible source energized vital buses as the normal mode. The analysis indicated that a reduction in the incremental risk increase (caused by plant operation with a vital bus being energized in an off-normal mode) can be accomplished by limiting the time permitted in that condition. Currently, the time that a vital bus can be energized in the off-normal mode is not universally time-limited by plant Technical Specifications. Several alternatives for the reduction in incremental risk were examined and their value/impacts were derived. These data indicate that a recommendation be made for a Technical Specification time limitation of 72 hours per year for off-normal energizing a vital bus during operation of a PWR

  17. Evaluation of the use of bioethanol fuelled buses based on ambient air pollution screening and on-road measurements.

    Science.gov (United States)

    López-Aparicio, S; Hak, C

    2013-05-01

    Mitigation measures to reduce greenhouse gas emissions may have adverse effects on urban air quality and human exposure to harmful pollutants. The use of bioethanol fuelled vehicles is increasing worldwide and may create new undesired pollution effects. Different measurement campaigns were performed in a pilot study to contribute to the understanding of the consequences associated with the use of bioethanol blended fuel (E95) on a series of pollutants. Ambient screening measurements of NO2, O3, acetic acid, formaldehyde and acetaldehyde were performed at different urban locations, exposed and not exposed to the circulation of bioethanol buses. In addition, volatile organic compounds were measured at the exhaust pipe of a bioethanol fuelled bus, both under idling conditions (carbonyls; DNPH cartridge) and under on-road driving conditions applying online monitoring (PTR-TOF). Higher ambient acetaldehyde values were measured at locations exposed to bioethanol fuelled buses than at locations not exposed, and very high acetaldehyde and acetic acid values were measured from the exhaust pipe during driving conditions (acetaldehyde>150 ppm; acetic acid ≈ 20-30 ppm) and modelled at close distance to the bioethanol bus. Human exposure to high concentration of acetaldehyde is expected, and it may involve a significantly increased chance in developing cancer. The high concentration of acetic acid will involve odour annoyance and significant material degradation or corrosion. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Load demand profile for a large charging station of a fleet of all-electric plug-in buses

    Directory of Open Access Journals (Sweden)

    Mario A. Rios

    2014-08-01

    Full Text Available This study proposes a general procedure to compute the load demand profile from a parking lot where a fleet of buses with electric propulsion mechanisms are charged. Such procedure is divided in three different stages, the first one models the daily energy utilisation of the batteries based on Monte Carlo simulations and route characteristics. The second one models the process in the charging station based on discrete event simulation of queues of buses served by a lot of available chargers. The third step computes the final demand profile in the parking lot because of the charging process based on the power consumption of batteries’ chargers and the utilisation of the available charges. The proposed procedure allows the computation of the number of required batteries’ chargers to be installed in a charging station placed at a parking lot in order to satisfy and ensure the operation of the fleet, the computation of the power demand profile and the peak load and the computation of the general characteristics of electrical infrastructure to supply the power to the station.

  19. A Facile Technique to Make Articulating Spacers for Infected Total Knee Arthroplasty

    Directory of Open Access Journals (Sweden)

    Yu-Ping Su

    2009-03-01

    Conclusion: Treating infected total knee arthroplasty with these self-made articulating spacers eradicates infection effectively, improves the life quality before reimplantation and provides good final results without significant complications.

  20. Bioecology of an articulated coralline alga Amphiroa fragilissima from Anjuna, Goa, Central Western Coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Ambiye, V.; Untawale, A.G

    An articulated coralline alga Amphiroa fragilissima L. Lam. was found to exhibit spasmogenic and hypotensive activities due to the presence of a biogenic amine. This biologically active alga was studied for its bioecology. Its thallus is multiaxial...

  1. Direct and indirect measures of speech articulator motions using low power EM sensors

    International Nuclear Information System (INIS)

    Barnes, T; Burnett, G; Gable, T; Holzrichter, J F; Ng, L

    1999-01-01

    Low power Electromagnetic (EM) Wave sensors can measure general properties of human speech articulator motions, as speech is produced. See Holzrichter, Burnett, Ng, and Lea, J.Acoust.Soc.Am. 103 (1) 622 (1998). Experiments have demonstrated extremely accurate pitch measurements ( and lt; 1 Hz per pitch cycle) and accurate onset of voiced speech. Recent measurements of pressure-induced tracheal motions enable very good spectra and amplitude estimates of a voiced excitation function. The use of the measured excitation functions and pitch synchronous processing enable the determination of each pitch cycle of an accurate transfer function and, indirectly, of the corresponding articulator motions. In addition, direct measurements have been made of EM wave reflections from articulator interfaces, including jaw, tongue, and palate, simultaneously with acoustic and glottal open/close signals. While several types of EM sensors are suitable for speech articulator measurements, the homodyne sensor has been found to provide good spatial and temporal resolution for several applications

  2. The Effects of Head-Up Display (HUD) Pitch Ladder Articulation, Pitch Number Location and Horizon Line Length on Unusual Attitude Recoveries for the F-16

    Science.gov (United States)

    1990-07-01

    No comment . ’D. No comment . E. The best display was the partially articulated HUD. F. Only pitch bars below the horizon should be articulated. G. Fully articulated pitch bars were the best. H. Fully articulated configuration was easiest to quickly determine which direction to the horizon. I. No comment . J. Fully articulated HUD gave instant feedback on which way to pull to the horizon, K. No comment . L. Definite difference using the full articulation. 2. The following zomments are

  3. Hybrid reactors

    International Nuclear Information System (INIS)

    Moir, R.W.

    1980-01-01

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of 233 U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m -2 , and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid

  4. Swedish buses global leader in energy efficiency; Svenska bussar vaerldsledande i energieffektivitet

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    By using hybrid technology and to develop a lighter car body, Volvo has developed one of the world's most energy-efficient bus with support from the Swedish Energy Agency. There is great potential for energy efficiency and emission reductions in the transport sector, especially in the heavy traffic. The transport sector accounts for about 23 percent of total energy use in Sweden and is to 94 percent dependent on fossil fuels.

  5. Applying hybridity: rhythms of the Hajj, Tumblr, and Snowden.

    Directory of Open Access Journals (Sweden)

    Paul O'Connor

    2013-12-01

    Full Text Available Hybridity has long been a contested term, critiqued as elitist and contradictory. This paper begins by arguing that hybridity has been debated too often and applied too seldom. It takes the premise that hybridity is an everyday fact of life and accordingly it should be articulated in academic works as a mode of analysis. In acknowledging works that call for the utilization of hybridity’s analytical potential this work applies hybridity to the analysis of three disparate topics, the modern pilgrimage to Mecca or hajj, the social networking and blogging platform Tumblr, and the Edward Snowden affair. Hybridity is contrasted with Lefebvre’s rhythmanalysis and applied as a conjoined conceptual focus on these issues. In each scenario a variety of hybrid connections are presented and situated in Bauman’s liquid modernity. These representations of hybridity highlight the manifold dimensions of the concept itself, that it can be superficial, political, celebrated, progressive, and mundane. Rather than dismiss the conceptual complexities of hybridity this paper calls for a harnessing of the broad scope of inference that hybridity presents in application. Working with hybridity thus provides a way to link topics and work organically between multiple disciplines.

  6. 26 CFR 48.4221-8 - Tax-free sales of tires, tubes, and tread rubber used on intercity, local, and school buses.

    Science.gov (United States)

    2010-04-01

    ... if the bus has a passenger seating capacity of at least 20 adults and the transportation is available... of a school. Incidental use (deadheading) of the school bus without passengers to or from a point to... used on intercity, local, and school buses. 48.4221-8 Section 48.4221-8 Internal Revenue INTERNAL...

  7. Road Safety Data, Collection, Transfer and Analysis DaCoTa. Factsheet Traffic safety basic facts 2010 : heavy goods vehicles and buses.

    NARCIS (Netherlands)

    Pace, J.-F. López de Cozar, E. Pérez-Fuster, P. Sanmartín, J. Kirk, A. Yannis, G. Evgenikos, P. Argyropoulou, E. Papantoniou, P. Broughton, J. Knowles, J. Brandstaetter, C. Candappa, N. Christoph, M. Vis, M. Haddak, M. & Moutengou, E.

    2012-01-01

    Heavy Goods Vehicles (HGVs) are defined as goods vehicles of over 3,5 tons maximum permissible gross vehicle weight. Road traffic accidents involving HGVs tend to be more severe than other accidents because of the great size and mass of these vehicles. Buses and coaches are included in this Basic

  8. An Analysis of Challenges Faced by Students Learning in Virtual and Open Distance Learning System: A Case of Bindura University of Science Education (BUSE)

    Science.gov (United States)

    Dodo, Obediah; Makwerere, David; Parwada, Matavire; Parwada, Cosmas

    2013-01-01

    After realizing that the traditional modes of tuition in Zimbabwe's andragogy had either gone obsolete or over-crowded, BUSE ventured into a "virtualised" model of open and distance learning as a way of out-doing other competing universities. However, as the programme was rolled out, there came a myriad of challenges affecting the…

  9. Hybrid composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites was investigated by Kalaprasad et al [25].Chemical surface modifications such as alkali, acetic anhydride, stearic acid, permanganate, maleic anhydride, silane...

  10. Real life testing of a Hybrid PEM Fuel Cell Bus

    Science.gov (United States)

    Folkesson, Anders; Andersson, Christian; Alvfors, Per; Alaküla, Mats; Overgaard, Lars

    Fuel cells produce low quantities of local emissions, if any, and are therefore one of the most promising alternatives to internal combustion engines as the main power source in future vehicles. It is likely that urban buses will be among the first commercial applications for fuel cells in vehicles. This is due to the fact that urban buses are highly visible for the public, they contribute significantly to air pollution in urban areas, they have small limitations in weight and volume and fuelling is handled via a centralised infrastructure. Results and experiences from real life measurements of energy flows in a Scania Hybrid PEM Fuel Cell Concept Bus are presented in this paper. The tests consist of measurements during several standard duty cycles. The efficiency of the fuel cell system and of the complete vehicle are presented and discussed. The net efficiency of the fuel cell system was approximately 40% and the fuel consumption of the concept bus is between 42 and 48% lower compared to a standard Scania bus. Energy recovery by regenerative braking saves up 28% energy. Bus subsystems such as the pneumatic system for door opening, suspension and brakes, the hydraulic power steering, the 24 V grid, the water pump and the cooling fans consume approximately 7% of the energy in the fuel input or 17% of the net power output from the fuel cell system. The bus was built by a number of companies in a project partly financed by the European Commission's Joule programme. The comprehensive testing is partly financed by the Swedish programme "Den Gröna Bilen" (The Green Car). A 50 kW el fuel cell system is the power source and a high voltage battery pack works as an energy buffer and power booster. The fuel, compressed hydrogen, is stored in two high-pressure stainless steel vessels mounted on the roof of the bus. The bus has a series hybrid electric driveline with wheel hub motors with a maximum power of 100 kW. Hybrid Fuel Cell Buses have a big potential, but there are

  11. Hybrid intermediaries

    OpenAIRE

    Cetorelli, Nicola

    2014-01-01

    I introduce the concept of hybrid intermediaries: financial conglomerates that control a multiplicity of entity types active in the "assembly line" process of modern financial intermediation, a system that has become known as shadow banking. The complex bank holding companies of today are the best example of hybrid intermediaries, but I argue that financial firms from the "nonbank" space can just as easily evolve into conglomerates with similar organizational structure, thus acquiring the cap...

  12. Real-world emissions and fuel consumption of diesel buses and trucks in Macao: From on-road measurement to policy implications

    Science.gov (United States)

    Wu, Xiaomeng; Zhang, Shaojun; Wu, Ye; Li, Zhenhua; Zhou, Yu; Fu, Lixin; Hao, Jiming

    2015-11-01

    A total of 13 diesel buses and 12 diesel trucks in Macao were tested using portable emission measurement systems (PEMS) including a SEMTECH-DS for gaseous emissions and a SEMTECH-PPMD for PM2.5. The average emission rates of gaseous pollutants and CO2 are developed with the operating mode defined by the instantaneous vehicle specific power (VSP) and vehicle speed. Both distance-based and fuel mass-based emission factors for gaseous pollutants (e.g., CO, THC and NOX) are further estimated under typical driving conditions. The average distance-based NOX emission of heavy-duty buses (HDBs) is higher than 13 g km-1. Considering the unfavorable conditions for selective reductions catalyst (SCR) systems, such as low-speed driving conditions, more effective technology options (e.g., dedicated natural gas buses and electric buses) should be considered by policy makers in Macao. We identified strong effects of the vehicle size, engine displacement and driving conditions on real-world CO2 emission factors and fuel consumption for diesel vehicles. Therefore, detailed profiles regarding vehicle specifications can reduce the uncertainty in their fleet-average on-road fuel consumption. In addition, strong correlations between relative emission factors and driving conditions indicated by the average speed of generated micro-trips are identified based on a micro-trip method. For example, distance-based emission factors of HDBs will increase by 39% for CO, 29% for THC, 43% for NOX and 26% for CO2 when the average speed decreases from 30 km h-1 to 20 km h-1. The mitigation of on-road emissions from diesel buses and trucks by improving traffic conditions through effective traffic and economic management measures is therefore required. This study demonstrates the important role of PEMS in understanding vehicle emissions and mitigation strategies from science to policy perspectives.

  13. Real-world operation conditions and on-road emissions of Beijing diesel buses measured by using portable emission measurement system and electric low-pressure impactor.

    Science.gov (United States)

    Liu, Zhihua; Ge, Yunshan; Johnson, Kent C; Shah, Asad Naeem; Tan, Jianwei; Wang, Chu; Yu, Linxiao

    2011-03-15

    On-road measurement is an effective method to investigate real-world emissions generated from vehicles and estimate the difference between engine certification cycles and real-world operating conditions. This study presents the results of on-road measurements collected from urban buses which propelled by diesel engine in Beijing city. Two widely used Euro III emission level buses and two Euro IV emission level buses were chosen to perform on-road emission measurements using portable emission measurement system (PEMS) for gaseous pollutant and Electric Low Pressure Impactor (ELPI) for particulate matter (PM) number emissions. The results indicate that considerable discrepancies of engine operating conditions between real-world driving cycles and engine certification cycles have been observed. Under real-world operating conditions, carbon monoxide (CO) and hydrocarbon (HC) emissions can easily meet their respective regulations limits, while brake specification nitrogen oxide (bsNO(x)) emissions present a significant deviation from its corresponding limit. Compared with standard limits, the real-world bsNO(x) emission of the two Euro III emission level buses approximately increased by 60% and 120% respectively, and bsNO(x) of two Euro IV buses nearly twice standard limits because Selective Catalytic Reduction (SCR) system not active under low exhaust temperature. Particle mass were estimated via particle size distribution with the assumption that particle density and diameter is liner. The results demonstrate that nanometer size particulate matter make significant contribution to total particle number but play a minor role to total particle mass. It is suggested that specific certified cycle should be developed to regulate bus engines emissions on the test bench or use PEMS to control the bus emissions under real-world operating conditions. Copyright © 2010 Elsevier B.V. All rights reserved.

  14. Simulation on the consumption-oriented evaluation of ventilation concepts for buses; Simulation zur verbrauchsorientierten Bewertung von Omnibus-Klimatisierungskonzepten

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Christian; Foersterling, Sven; Strupp, Christian; Lemke, Nicholas [TLK Thermo GmbH, Braunschweig (Germany); Sonnekalb, Michael [Konvekta AG, Schwalmstadt (Germany); Koehler, Juergen [Technische Univ. Braunschweig (Germany)

    2012-11-01

    This paper presents different air conditioning system and climate control concepts for buses. These concepts are investigated based on a complete vehicle simulation in order to perform a close-to-reality assessment. The effects of various control strategies are examined in a comparative approach using boundary conditions which are based on on-the-road-relevant test cycles and climatic conditions. The focus of this study is the evaluation of the total energy consumption. Moreover, an analysis of air conditioning systems with conventional and natural refrigerants is presented (R-134a and R-744). Based on simulation results, a high fuel-saving concept is developed and tested in a virtual test drive, in order to present a specific method of control strategy evaluation with transient boundary and environmental conditions. (orig.)

  15. Robust Clamping Force Control of an Electro-Mechanical Brake System for Application to Commercial City Buses

    Directory of Open Access Journals (Sweden)

    Sangjune Eum

    2017-02-01

    Full Text Available This paper proposes a sensor-less robust force control method for improving the control performance of an electro-mechanical brake (EMB which is applicable to commercial city buses. The EMB generates the accurate clamping force commanded by a driver through an independent motor control at each wheel instead of using existing mechanical components. In general, an EMB undergoes parameter variation and a backdrivability problem. For this reason, the cascade control strategy (e.g., force-position cascade control structure is proposed and the disturbance observer is employed to enhance control robustness against model variations. Additionally, this paper proposed the clamping force estimation method for a sensor-less control, i.e., the clamping force observer (CFO. Finally, in order to confirm the performance and effectiveness of a proposed robust control method, several experiments are performed and analyzed.

  16. A cost-benefit analysis of alternatively fueled buses with special considerations for V2G technology

    International Nuclear Information System (INIS)

    Shirazi, Yosef; Carr, Edward; Knapp, Lauren

    2015-01-01

    Motivated by climate, health and economic considerations, alternatively-fueled bus fleets have emerged worldwide. Two popular alternatives are compressed natural gas (CNG) and electric vehicles. The latter provides the opportunity to generate revenue through vehicle-to-grid (V2G) services if properly equipped. This analysis conducts a robust accounting of the costs of diesel, CNG and battery-electric powertrains for school buses. Both marginal and fleet-wide scenarios are explored. Results indicate that the marginal addition of neither a small CNG nor a small V2G-enabled electric bus is cost effective at current prices. Contrary to previous findings, a small V2G-enabled electric bus increases net present costs by $7,200/seat relative to diesel for a Philadelphia, PA school district. A small CNG bus increases costs by $1,200/seat relative to diesel. This analysis is the first to quantify and include the economic implications of cold temperature extremes on electric vehicle battery operations, and the lower V2G revenues that result. Additional costs and limitations imposed by electric vehicles performing V2G are frequently overlooked in the literature and are explored here. If a variety of technical, legal, and economic challenges are overcome, a future eBus may be economical. - Highlights: • We present a robust cost-benefit analysis of various bus technologies. • Diesel is a low-cost technology at current prices. • CNG represents slightly higher costs on a marginal bus basis. • V2G-enabled electric buses are not cost-effective at current prices. • We identify frequently overlooked costs and challenges to V2G implementation.

  17. Evaluation of the use of bioethanol fuelled buses based on ambient air pollution screening and on-road measurements

    Energy Technology Data Exchange (ETDEWEB)

    López-Aparicio, S., E-mail: sla@nilu.no; Hak, C.

    2013-05-01

    Mitigation measures to reduce greenhouse gas emissions may have adverse effects on urban air quality and human exposure to harmful pollutants. The use of bioethanol fuelled vehicles is increasing worldwide and may create new undesired pollution effects. Different measurement campaigns were performed in a pilot study to contribute to the understanding of the consequences associated with the use of bioethanol blended fuel (E95) on a series of pollutants. Ambient screening measurements of NO{sub 2}, O{sub 3}, acetic acid, formaldehyde and acetaldehyde were performed at different urban locations, exposed and not exposed to the circulation of bioethanol buses. In addition, volatile organic compounds were measured at the exhaust pipe of a bioethanol fuelled bus, both under idling conditions (carbonyls; DNPH cartridge) and under on-road driving conditions applying online monitoring (PTR-TOF). Higher ambient acetaldehyde values were measured at locations exposed to bioethanol fuelled buses than at locations not exposed, and very high acetaldehyde and acetic acid values were measured from the exhaust pipe during driving conditions (acetaldehyde > 150 ppm; acetic acid ≈ 20–30 ppm) and modelled at close distance to the bioethanol bus. Human exposure to high concentration of acetaldehyde is expected, and it may involve a significantly increased chance in developing cancer. The high concentration of acetic acid will involve odour annoyance and significant material degradation or corrosion. - Highlights: ► Acetaldehyde levels above 150 ppm were measured from the bioethanol bus. ► High acetic acid levels (20–30 ppm) were measured from the bioethanol bus. ► Demonstrated usefulness of PTR-MS to evaluate non-criteria pollutants ► High levels of acetaldehyde and acetic acid are estimated in the dispersion plume. ► Climate mitigation measures may have adverse impact on air quality.

  18. Evaluation of the use of bioethanol fuelled buses based on ambient air pollution screening and on-road measurements

    International Nuclear Information System (INIS)

    López-Aparicio, S.; Hak, C.

    2013-01-01

    Mitigation measures to reduce greenhouse gas emissions may have adverse effects on urban air quality and human exposure to harmful pollutants. The use of bioethanol fuelled vehicles is increasing worldwide and may create new undesired pollution effects. Different measurement campaigns were performed in a pilot study to contribute to the understanding of the consequences associated with the use of bioethanol blended fuel (E95) on a series of pollutants. Ambient screening measurements of NO 2 , O 3 , acetic acid, formaldehyde and acetaldehyde were performed at different urban locations, exposed and not exposed to the circulation of bioethanol buses. In addition, volatile organic compounds were measured at the exhaust pipe of a bioethanol fuelled bus, both under idling conditions (carbonyls; DNPH cartridge) and under on-road driving conditions applying online monitoring (PTR-TOF). Higher ambient acetaldehyde values were measured at locations exposed to bioethanol fuelled buses than at locations not exposed, and very high acetaldehyde and acetic acid values were measured from the exhaust pipe during driving conditions (acetaldehyde > 150 ppm; acetic acid ≈ 20–30 ppm) and modelled at close distance to the bioethanol bus. Human exposure to high concentration of acetaldehyde is expected, and it may involve a significantly increased chance in developing cancer. The high concentration of acetic acid will involve odour annoyance and significant material degradation or corrosion. - Highlights: ► Acetaldehyde levels above 150 ppm were measured from the bioethanol bus. ► High acetic acid levels (20–30 ppm) were measured from the bioethanol bus. ► Demonstrated usefulness of PTR-MS to evaluate non-criteria pollutants ► High levels of acetaldehyde and acetic acid are estimated in the dispersion plume. ► Climate mitigation measures may have adverse impact on air quality

  19. Genetic algorithm trajectory plan optimization for EAMA: EAST Articulated Maintenance Arm

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Jing, E-mail: wujing@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd., Hefei, Anhui (China); Lappeenranta University of Technology, Skinnarilankatu 34, Lappeenranta (Finland); Wu, Huapeng [Lappeenranta University of Technology, Skinnarilankatu 34, Lappeenranta (Finland); Song, Yuntao; Cheng, Yong; Zhao, Wenglong [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd., Hefei, Anhui (China); Wang, Yongbo [Lappeenranta University of Technology, Skinnarilankatu 34, Lappeenranta (Finland)

    2016-11-01

    Highlights: • A redundant 10-DOF serial-articulated robot for EAST assembly and maintains is presented. • A trajectory optimization algorithm of the robot is developed. • A minimum jerk objective is presented to suppress machining vibration of the robot. - Abstract: EAMA (EAST Articulated Maintenance Arm) is an articulated serial manipulator with 7 degrees of freedom (DOF) articulated arm followed by 3-DOF gripper, total length is 8.867 m, works in experimental advanced superconductor tokamak (EAST) vacuum vessel (VV) to perform blanket inspection and remote maintenance tasks. This paper presents a trajectory optimization method which aims to pursue the 7-DOF articulated arm a stable movement, which keeps the mounted inspection camera anti-vibration. Based on dynamics analysis, trajectory optimization algorithm adopts multi-order polynomial interpolation in joint space and high order geometry Jacobian transform. The object of optimization algorithm is to suppress end-effector movement vibration by minimizing jerk RMS (root mean square) value. The proposed solution has such characteristics which can satisfy kinematic constraints of EAMA’s motion and ensure the arm running under the absolute values of velocity, acceleration and jerk boundaries. GA (genetic algorithm) is employed to find global and robust solution for this problem.

  20. Scan-based volume animation driven by locally adaptive articulated registrations.

    Science.gov (United States)

    Rhee, Taehyun; Lewis, J P; Neumann, Ulrich; Nayak, Krishna S

    2011-03-01

    This paper describes a complete system to create anatomically accurate example-based volume deformation and animation of articulated body regions, starting from multiple in vivo volume scans of a specific individual. In order to solve the correspondence problem across volume scans, a template volume is registered to each sample. The wide range of pose variations is first approximated by volume blend deformation (VBD), providing proper initialization of the articulated subject in different poses. A novel registration method is presented to efficiently reduce the computation cost while avoiding strong local minima inherent in complex articulated body volume registration. The algorithm highly constrains the degrees of freedom and search space involved in the nonlinear optimization, using hierarchical volume structures and locally constrained deformation based on the biharmonic clamped spline. Our registration step establishes a correspondence across scans, allowing a data-driven deformation approach in the volume domain. The results provide an occlusion-free person-specific 3D human body model, asymptotically accurate inner tissue deformations, and realistic volume animation of articulated movements driven by standard joint control estimated from the actual skeleton. Our approach also addresses the practical issues arising in using scans from living subjects. The robustness of our algorithms is tested by their applications on the hand, probably the most complex articulated region in the body, and the knee, a frequent subject area for medical imaging due to injuries. © 2011 IEEE

  1. Kinematics study and workspace analysis of an articulated robotic arm of a rpar

    International Nuclear Information System (INIS)

    Zeb, J.; Rashid, F.; Iqbal, N.

    2007-01-01

    An itinerant RPAR (Radiation Protection Assistant Robot) has been constructed to assist radiation workers in radiation area which are radiologically hazardous and beyond tile safe approach of radiation workers. The RPAR comprises of a cubicle tri- wheeled platform and a 4-DOF (Four Degree of Freedom) serial type articulated robotic arm. The movement of the platform is controlled by two differential wheeled driving systems. The Kinematics and Manipulator Jacobian of the end-effector (gripper) of the articulated robotic arm mounted on the RPAR were evaluated. The work space analyses of the articulated robotic arm have been carried out. The RPAR is helpful for surveillance of radiation zones, to pick and carry dropdown radioactive samples and sources, in routine radiological operations as well as during an emergency response to a radiological accident. The performance of the RPAR was found satisfactory. (author)

  2. A clinical technique for virtual articulator mounting with natural head position by using calibrated stereophotogrammetry.

    Science.gov (United States)

    Lam, Walter Y H; Hsung, Richard T C; Choi, Winnie W S; Luk, Henry W K; Cheng, Leo Y Y; Pow, Edmond H N

    2017-09-29

    Accurate articulator-mounted casts are essential for occlusion analysis and for fabrication of dental prostheses. Although the axis orbital plane has been commonly used as the reference horizontal plane, some clinicians prefer to register the horizontal plane with a spirit level when the patient is in the natural head position (NHP) to avoid anatomic landmark variations. This article presents a digital workflow for registering the patient's horizontal plane in NHP on a virtual articulator. An orientation reference board is used to calibrate a stereophotogrammetry device and a 3-dimensional facial photograph with the patient in NHP. The horizontal plane can then be automatically registered to the patient's virtual model and aligned to the virtual articulator at the transverse horizontal axis level. This technique showed good repeatability with positional differences of less than 1 degree and 1 mm in 5 repeated measurements in 1 patient. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  3. Development of a Wave Energy -Responsive Self-Actuated Blade Articulation Mechanism for an OWC Turbine

    Energy Technology Data Exchange (ETDEWEB)

    Francis A. Di Bella

    2010-06-01

    The Phase I SBIR effort completed the feasibility design, fabrication, and wind tunnel testing of a self-actuated blade articulation mechanism that uses a torsion bar and a lightweight airfoil to affect the articulation of the Wells airfoil. The articulation is affected only by the air stream incident on the airfoil. The self-actuating blade eliminates the complex and costly linkage mechanism that is now needed to perform this function on either a variable pitch Wells-type or Dennis-Auld air turbine. Using the results reported by independent researchers, the projected improvement in the Wells-type turbine efficiency is 20-40%, in addition to an increase in the operating air flow range by 50-100%, therefore enabling a smaller or slower single turbine to be used.

  4. Lip-Synching Using Speaker-Specific Articulation, Shape and Appearance Models

    Directory of Open Access Journals (Sweden)

    Gaspard Breton

    2009-01-01

    Full Text Available We describe here the control, shape and appearance models that are built using an original photogrammetric method to capture characteristics of speaker-specific facial articulation, anatomy, and texture. Two original contributions are put forward here: the trainable trajectory formation model that predicts articulatory trajectories of a talking face from phonetic input and the texture model that computes a texture for each 3D facial shape according to articulation. Using motion capture data from different speakers and module-specific evaluation procedures, we show here that this cloning system restores detailed idiosyncrasies and the global coherence of visible articulation. Results of a subjective evaluation of the global system with competing trajectory formation models are further presented and commented.

  5. Metatarsalgia located by synovitis and uncertainty of the articulation metatarsus-phalanges of the II toe

    International Nuclear Information System (INIS)

    Gerstner G, Juan Bernardo

    2002-01-01

    The synovitis and the uncertainty of the articulation metatarsus-phalanges (MP) of the II toe they are the causes more frequent of metatersalgia located in this articulation of the foot, frequently bad diagnosed and not well managed by the general orthopedist. The natural history understands stadiums so precocious as the synovitis without alteration of peri-articular structures, going by the frank uncertainty, and finishing with the angular deformities and the complete luxation of the articulation MP. The meticulous and directed interrogation, the physical exam specifies and the classification of the diagnostic they are the keys for the successful handling of the pathology. The surgical correction of this condition should always be associated to the correction of associate deformities as the hallux valgus and the fingers in claw

  6. The thumb carpometacarpal joint: curvature morphology of the articulating surfaces, mathematical description and mechanical functioning.

    Science.gov (United States)

    Dathe, Henning; Dumont, Clemens; Perplies, Rainer; Fanghänel, Jochen; Kubein-Meesenburg, Dietmar; Nägerl, Hans; Wachowski, Martin M

    2016-01-01

    The purpose is to present a mathematical model of the function of the thumb carpometacarpal joint (TCMCJ) based on measurements of human joints. In the TCMCJ both articulating surfaces are saddle-shaped. The aim was to geometrically survey the shapes of the articulating surfaces using precise replicas of 28 TCMCJs. None of these 56 articulating surfaces did mathematically extend the differential geometrical neighbourhood around the main saddle point so that each surface could be characterised by three main parameters: the two extreme radii of curvature in the main saddle point and the angle between the saddles' asymptotics (straight lines). The articulating surfaces, when contacting at the respective main saddle points, are incongruent. Hence, the TCMCJ has functionally five kinematical degrees of freedom (DOF); two DOF belong to flexion/extension, two to ab-/adduction. These four DOF are controlled by the muscular apparatus. The fifth DOF, axial rotation, cannot be adjusted but stabilized by the muscular apparatus so that physiologically under compressive load axial rotation does not exceed an angle of approximately ±3°. The TCMCJ can be stimulated by the muscular apparatus to circumduct. The mechanisms are traced back to the curvature incongruity of the saddle surfaces. Hence we mathematically proved that none of the individual saddle surfaces can be described by a quadratic saddle surface as is often assumed in literature. We derived an algebraic formula with which the articulating surfaces in the TCMCJ can be quantitatively described. This formula can be used to shape the articulating surfaces in physiologically equivalent TCMCJ-prostheses.

  7. Tribology considerations for hip joint articulations in relation to the "new orthopaedic patient".

    Science.gov (United States)

    Rieker, C B

    2006-01-01

    The purpose of this review is to examine alternative bearings used in total hip arthroplasty (THA) and discuss the specific tribologic needs of the "New Orthopaedic Patient". As orthopaedic patients today are younger and more active, there is a clear need for hip joint implants and articulations minimising the amount of wear and guarantying better stability. Recent modern developments in tribology with highly cross-linked polyethylenes and hard-on-hard bearings allow the safe and effective use of larger diameter articulations in THA.

  8. Sensory integration dysfunction affects efficacy of speech therapy on children with functional articulation disorders

    Directory of Open Access Journals (Sweden)

    Tung LC

    2013-01-01

    Full Text Available Li-Chen Tung,1,# Chin-Kai Lin,2,# Ching-Lin Hsieh,3,4 Ching-Chi Chen,1 Chin-Tsan Huang,1 Chun-Hou Wang5,6 1Department of Physical Medicine and Rehabilitation, Chi Mei Medical Center, Tainan, 2Program of Early Intervention, Department of Early Childhood Education, National Taichung University of Education, Taichung, 3School of Occupational Therapy, College of Medicine, National Taiwan University, Taipei, 4Department of Physical Medicine and Rehabilitation, National Taiwan University Hospital, Taipei, 5School of Physical Therapy, College of Medical Science and Technology, Chung Shan Medical University, Taichung, 6Physical Therapy Room, Chung Shan Medical University Hospital, Taichung, Taiwan#These authors contributed equally Background: Articulation disorders in young children are due to defects occurring at a certain stage in sensory and motor development. Some children with functional articulation disorders may also have sensory integration dysfunction (SID. We hypothesized that speech therapy would be less efficacious in children with SID than in those without SID. Hence, the purpose of this study was to compare the efficacy of speech therapy in two groups of children with functional articulation disorders: those without and those with SID.Method: A total of 30 young children with functional articulation disorders were divided into two groups, the no-SID group (15 children and the SID group (15 children. The number of pronunciation mistakes was evaluated before and after speech therapy.Results: There were no statistically significant differences in age, sex, sibling order, education of parents, and pretest number of mistakes in pronunciation between the two groups (P > 0.05. The mean and standard deviation in the pre- and posttest number of mistakes in pronunciation were 10.5 ± 3.2 and 3.3 ± 3.3 in the no-SID group, and 10.1 ± 2.9 and 6.9 ± 3.5 in the SID group, respectively. Results showed great changes after speech therapy treatment (F

  9. Impairment of Vowel Articulation as a Possible Marker of Disease Progression in Parkinson's Disease

    OpenAIRE

    Skodda, Sabine; Grönheit, Wenke; Schlegel, Uwe

    2012-01-01

    PURPOSE: The aim of the current study was to survey if vowel articulation in speakers with Parkinson's disease (PD) shows specific changes in the course of the disease. METHOD: 67 patients with PD (42 male) and 40 healthy speakers (20 male) were tested and retested after an average time interval of 34 months. Participants had to read a given text as source for subsequent calculation of the triangular vowel space area (tVSA) and vowel articulation index (VAI). Measurement of tVSA and VAI were ...

  10. Competence articulation: Alignment of competences and responsibilities in synchronous telemedical collaboration

    DEFF Research Database (Denmark)

    Larsen, Simon Bo; Bardram, Jakob Eyvind

    2008-01-01

    . In particular, we want to look at the dynamic quality of competences, and investigate how competence is mutually developed in coordinated work. We have termed this process competence articulation, a concept which tries to emphasize competence as well as social development of competence as part of cooperation......Many studies and concepts within CSCW deal with the temporal, spatial, social, and computational aspects of supporting collaborative work. In this paper we want to pay attention to another central aspect to the achievement of collaborative work, namely the competence of the people involved...... communication options for competence articulation, which again improve collaboration and thus the quality of the treatment....

  11. Design of articulated mechanisms with a degree of freedom constraint using global optimization

    DEFF Research Database (Denmark)

    Kawamoto, Atsushi; Stolpe, Mathias

    2004-01-01

    This paper deals with design of articulated mechanisms using a truss ground structure representation. The considered mechanism design problem is to maximize the output displacement for a given input force by choosing a prescribed number of truss elements out of all the available elements, so...... that the resultant mechanism has one mechanical degree of freedom when supported in a statically determinate manner. The mechanical degree of freedom constraint is included since it is essential for obtaining a proper articulated mechanism design. The Green-Lagrange strain measure is used to accommodate for large...

  12. [Clinical characteristics and speech therapy of lingua-apical articulation disorder].

    Science.gov (United States)

    Zhang, Feng-hua; Jin, Xing-ming; Zhang, Yi-wen; Wu, Hong; Jiang, Fan; Shen, Xiao-ming

    2006-03-01

    To explore the clinical characteristics and speech therapy of 62 children with lingua-apical articulation disorder. Peabody Picture Vocabulary Test (PPVT), Gesell development scales (Gesell), Wechsler Intelligence Scale for Preschool Children (WPPSI) and speech test were performed for 62 children at the ages of 3 to 8 years with lingua-apical articulation disorder. PPVT was used to measure receptive vocabulary skills. GESELL and WPPSI were utilized to represent cognitive and non-verbal ability. The speech test was adopted to assess the speech development. The children received speech therapy and auxiliary oral-motor functional training once or twice a week. Firstly the target sound was identified according to the speech development milestone, then the method of speech localization was used to clarify the correct articulation placement and manner. It was needed to change food character and administer oral-motor functional training for children with oral motor dysfunction. The 62 cases with the apical articulation disorder were classified into four groups. The combined pattern of the articulation disorder was the most common (40 cases, 64.5%), the next was apico-dental disorder (15 cases, 24.2%). The third was palatal disorder (4 cases, 6.5%) and the last one was the linguo-alveolar disorder (3 cases, 4.8%). The substitution errors of velar were the most common (95.2%), the next was omission errors (30.6%) and the last was absence of aspiration (12.9%). Oral motor dysfunction was found in some children with problems such as disordered joint movement of tongue and head, unstable jaw, weak tongue strength and poor coordination of tongue movement. Some children had feeding problems such as preference of eating soft food, keeping food in mouths, eating slowly, and poor chewing. After 5 to 18 times of therapy, the effective rate of speech therapy reached 82.3%. The lingua-apical articulation disorders can be classified into four groups. The combined pattern of the

  13. The impact of brief restriction to articulation on children's subsequent speech production.

    Science.gov (United States)

    Seidl, Amanda; Brosseau-Lapré, Françoise; Goffman, Lisa

    2018-02-01

    This project explored whether disruption of articulation during listening impacts subsequent speech production in 4-yr-olds with and without speech sound disorder (SSD). During novel word learning, typically-developing children showed effects of articulatory disruption as revealed by larger differences between two acoustic cues to a sound contrast, but children with SSD were unaffected by articulatory disruption. Findings suggest that, when typically developing 4-yr-olds experience an articulatory disruption during a listening task, the children's subsequent production is affected. Children with SSD show less influence of articulatory experience during perception, which could be the result of impaired or attenuated ties between perception and articulation.

  14. Re/membering: articulating cultural identity in Philippine fiction in English

    OpenAIRE

    Martin, Jocelyn S.

    2010-01-01

    This dissertation examines how Philippine (or Filipino) authors emphasise the need for articulating or “re/membering” cultural identity. The researcher mainly draws from the theory of Caribbean critic, Stuart Hall, who views cultural identity as an articulation which allows “the fragmented, decentred human agent” to be considered as one who is both “subject-ed” by power but/and one who is capable of acting against those powers (Grossberg 1996 [1986]: 157, emphasis mine). Applied to the Philip...

  15. Three-Dimensional Static Articulation Accuracy of Virtual Models-Part II: Effect of Model Scanner-CAD Systems and Articulation Method.

    Science.gov (United States)

    Yee, Sophia Hui Xin; Esguerra, Roxanna Jean; Chew, Amelia Anya Qin'An; Wong, Keng Mun; Tan, Keson Beng Choon

    2018-02-01

    Accurate maxillomandibular relationship transfer is important for CAD/CAM prostheses. This study compared the 3D-accuracy of virtual model static articulation in three laboratory scanner-CAD systems (Ceramill Map400 [AG], inEos X5 [SIR], Scanner S600 Arti [ZKN]) using two virtual articulation methods: mounted models (MO), interocclusal record (IR). The master model simulated a single crown opposing a 3-unit fixed partial denture. Reference values were obtained by measuring interarch and interocclusal reference features with a coordinate measuring machine (CMM). MO group stone casts were articulator-mounted with acrylic resin bite registrations while IR group casts were hand-articulated with poly(vinyl siloxane) bite registrations. Five test model sets were scanned and articulated virtually with each system (6 test groups, 15 data sets). STL files of the virtual models were measured with CMM software. dR R , dR C , and dR L , represented interarch global distortions at right, central, and left sides, respectively, while dR M , dX M , dY M , and dZ M represented interocclusal global and linear distortions between preparations. Mean interarch 3D distortion ranged from -348.7 to 192.2 μm for dR R , -86.3 to 44.1 μm for dR C , and -168.1 to 4.4 μm for dR L . Mean interocclusal distortion ranged from -257.2 to -85.2 μm for dR M , -285.7 to 183.9 μm for dX M , -100.5 to 114.8 μm for dY M , and -269.1 to -50.6 μm for dZ M . ANOVA showed that articulation method had significant effect on dR R and dX M , while system had a significant effect on dR R , dR C , dR L , dR M , and dZ M . There were significant differences between 6 test groups for dR R, dR L dX M , and dZ M . dR R and dX M were significantly greater in AG-IR, and this was significantly different from SIR-IR, ZKN-IR, and all MO groups. Interarch and interocclusal distances increased in MO groups, while they decreased in IR groups. AG-IR had the greatest interarch distortion as well as interocclusal superior

  16. Multi Bus DC-DC Converter in Electric Hybrid Vehicles

    Science.gov (United States)

    Krithika, V.; Subramaniam, C.; Sridharan, R.; Geetha, A.

    2018-04-01

    This paper is cotncerned with the design, simulation and fabrication of the prototype of a Multi bus DC- DC converter operating from 42V DC and delivering 14V DC and 260V DC. As a result, three DC buses are interconnected through a single power electronic circuitry. Such a requirement is energized in the development of a hybrid electric automobile which uses the technology of fuel cell. This is implemented by using a Bidirectional DC-DC converter configuration which is ideally suitable for multiple outputs with mutual electrical isolation. For the sake of reduced size and cost of step-up transformer, selection of a high frequency switching cycle at 10 KHz was done.

  17. Hybrid stars

    Indian Academy of Sciences (India)

    Hybrid stars. AsHOK GOYAL. Department of Physics and Astrophysics, University of Delhi, Delhi 110 007, India. Abstract. Recently there have been important developments in the determination of neutron ... number and the electric charge. ... available to the system to rearrange concentration of charges for a given fraction of.

  18. Is It Necessary to Articulate a Research Methodology When Reporting on Theoretical Research?

    Science.gov (United States)

    Smith, Juliana; Small, Rosalie

    2017-01-01

    In this paper the authors share their insights on whether it is necessary to articulate a research methodology when reporting on theoretical research. Initially the authors, one being a supervisor and the other, a PhD student and a colleague, were confronted with the question during supervision and writing of a thesis on theoretical research.…

  19. Articulation Works for Most Community College Transfer Students, But Some Problems Continue. OPPAGA Program Review.

    Science.gov (United States)

    Florida State Legislature, Tallahassee. Office of Program Policy Analysis and Government Accountability.

    The Florida legislature has passed several reforms designed to shorten the time it takes students to obtain their degrees. Although the reforms have produced benefits, some articulation problems continue. The problems include the following: (1) One in five (20%) AA transfer students take a semester or more of lower division courses at a…

  20. Effects of joint alignment and type on mechanical properties of thermoplastic articulated ankle-foot orthosis.

    Science.gov (United States)

    Gao, Fan; Carlton, William; Kapp, Susan

    2011-06-01

    Articulated or hinged ankle-foot orthosis (AFO) allow more range of motion. However, quantitative investigation on articulated AFO is still sparse. The objective of the study was to quantitatively investigate effects of alignment and joint types on mechanical properties of the thermoplastic articulated AFO. Tamarack dorsiflexion assist flexure joints with three durometers (75, 85 and 95) and free motion joint were tested. The AFO joint was aligned with the center of the motor shaft (surrogate ankle joint), 10 mm superior, inferior, anterior and posterior with respect to the motor shaft center. The AFO was passively moved from 20° plantar flexion to 15° dorsiflexion at a speed of 10°/s using a motorized device. Mechanical properties including index of hysteresis, passive resistance torque and quasi-static stiffness (at neutral, 5°, 10° and 15° in plantar flexion) were quantified. Significant effects of joint types and joint alignment on the mechanical properties of an articulated thermoplastic AFO were revealed. Specifically, center alignment showed minimum resistance and stiffness while anterior and posterior alignment showed significantly higher resistance and stiffness. The dorsiflexion assist torques at neutral position ranged from 0.69 ± 0.09 to 1.88 ± 0.10 Nm. Anterior and posterior alignment should be avoided as much as possible. The current study suggested that anterior and posterior alignment be avoided as much as possible in clinical practice due to potential skin irritation and increase in stress around the ankle joint.

  1. Activating a Teaching Philosophy in Social Work Education: Articulation, Implementation, and Evaluation

    Science.gov (United States)

    Owens, Larry W.; Miller, J. Jay; Grise-Owens, Erlene

    2014-01-01

    This article describes how to develop a comprehensive teaching philosophy from articulation through implementation to evaluation. Using literature and teaching-learning experiences, we discuss pragmatic steps for using a teaching philosophy to inform, engage, and evaluate teaching-learning. We promote an integrated teaching philosophy to ensure…

  2. Comparative study between 2 methods of mounting models in semiadjustable articulator for orthognathic surgery.

    Science.gov (United States)

    Mayrink, Gabriela; Sawazaki, Renato; Asprino, Luciana; de Moraes, Márcio; Fernandes Moreira, Roger William

    2011-11-01

    Compare the traditional method of mounting dental casts on a semiadjustable articulator and the new method suggested by Wolford and Galiano, 1 analyzing the inclination of maxillary occlusal plane in relation to FHP. Two casts of 10 patients were obtained. One of them was used for mounting of models on a traditional articulator, by using a face bow transfer system and the other one was used to mounting models at Occlusal Plane Indicator platform (OPI), using the SAM articulator. After that, na analysis of the accuracy of mounting models was performed. The angle made by de occlusal plane and FHP on the cephalogram should be equal the angle between the occlusal plane and the upper member of the articulator. The measures were tabulated in Microsoft Excell(®) and calculated using a 1-way analysis variance. Statistically, the results did not reveal significant differences among the measures. OPI and face bow presents similar results but more studies are needed to verify its accuracy relative to the maxillary cant in OPI or develop new techniques able to solve the disadvantages of each technique. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  3. Hemispheric Language Dominance of Language-Disordered, Articulation-Disordered, and Normal Children.

    Science.gov (United States)

    Pettit, John M.; Helms, Suzanne B.

    1979-01-01

    The hemispheric dominance for language of three groups of six- to nine- year-olds (ten language-disordered, ten articulation-disordered, and ten normal children) was compared, and two dichotic listening tests (digits and animal names) were administered. (Author/CL)

  4. Cognitive Levels Regarding Articulation Marks among Violin Students in Department of Music Education in Gazi University

    Science.gov (United States)

    Taninmis, Gamze Elif

    2016-01-01

    The purpose of this study is to determine violin students' cognitive levels about articulation marks in Department of Music Education, Fine Arts Education, Gazi Faculty of Education, Gazi University (GUGEF), and to identify the variables on which the cognitive levels vary. It is a descriptive research considering the study purpose, method and…

  5. Increasing the stability of the articulated lorry at braking by locking the fifth wheel coupling

    Science.gov (United States)

    Skotnikov, G. I.; Jileykin, M. M.; Komissarov, A. I.

    2018-02-01

    The jackknifing of the articulated lorry is determined by the loss of stability with respect to the vertical axis of the fifth wheel coupling, which can be caused by the failure of the brake system, the displacement of the center of mass of the semitrailer or tractor from the longitudinal axis of the vehicle, the road parameters (longitudinal and transverse slopes), the difference in the friction coefficients under the sides of the articulated lorry. In this regard, the issue of creating devices that prevent the jackknifing, and their control systems is important. A method is proposed for maintaining the stability of the movement of articulated lorry when braking both on a straight line and in a turn by blocking the relative rotation of the tractor and the trailer. Blocking occurs due to the creation of a stabilizing moment in the direction opposite to the angular rate of folding. To test the developed algorithm for locking the fifth wheel coupling, a mathematical model of the spatial motion of the articulated lorry was developed, including the models of interaction of an elastic tire with a rigid terrain, suspension systems, transmission, steering, fifth-wheel coupling. The efficiency and effectiveness of the coupling locking control system is proved by comparing the results of the simulation of a straight-line braking and braking in turn. It is shown that the application of the control system significantly increases the stability of the road train.

  6. 76 FR 16747 - Applications for New Awards; Hispanic-Serving Institutions STEM and Articulation Programs

    Science.gov (United States)

    2011-03-25

    ..., or mathematics and to develop model transfer and articulation agreements between 2-year Hispanic... income students attaining degrees in the fields of science, technology, engineering, or mathematics..., Taxpayer Identification Number, and Central Contractor Registry: To do business with the Department of...

  7. The Effects of Otitis Media on Articulation. Final Report for 1982-1983.

    Science.gov (United States)

    Roberts, Joanne Erwick

    The study examined the relationship in 44 preschoolers (considered to have varying degrees of predicted risk for poor school performance) between otitis media (middle ear disease) during the first 3 years of life and speech production (articulation) during preschool and school age years. Speech production accuracy was assessed by the number of…

  8. An Acceptable Alternative Articulation to Remediate Mispronunciation of the English /l/ Sound: Can Production Precede Perception?

    Science.gov (United States)

    Raver-Lampman, Greg; Wilson, Corinne

    2018-01-01

    This article explores the teaching of an acceptable alternative articulation to correct the mispronunciation of the English /l/ sound by speakers of some Asian languages and dialects who struggle to differentiate the English liquids /r/ and /l/. Although teaching pronunciation, and especially segmentals, has generated controversy over whether…

  9. Differentiation and Articulation in Tertiary Education Systems : A Study of Twelve African Countries

    OpenAIRE

    Ng'ethe, Njuguna; Subotzky, George; Afeti, George

    2008-01-01

    This study strives to sketch an initial map of the extent and nature of institutional and program differentiation within African systems of tertiary education. In doing so, it also seeks to chart the patterns of articulation that have emerged or been consciously put in place between the different institutional types (such as public universities, private universities, polytechnics, training...

  10. Articulated, Performance-Based Instruction Objectives Guide for Automotive Mechanics. Final Document. Revised.

    Science.gov (United States)

    Henderson, William Edward, Jr.

    Developed during a project designed to provide continuous, performance-based vocational training at the secondary and postsecondary levels, this instructional guide is intended to help teachers implement a laterally and vertically articulated secondary level automotive mechanics program. Introductory materials include descriptions of Automotive…

  11. Automotive Mechanic: Task List and Competency Record. Developed for Vocational-Technical Curriculum Articulation in Minnesota.

    Science.gov (United States)

    Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

    Intended for the vocational instructor, the booklet presents a task list and competency record for the occupational program of automotive mechanic. The list was developed by a working committee of auto mechanics instructors and industry representatives throughout the state of Minnesota for use in program articulation between secondary and…

  12. [The Articulator of Primary Health Care Program: an innovative proposal for qualification of Primary Health Care].

    Science.gov (United States)

    Doricci, Giovanna Cabral; Guanaes-Lorenzi, Carla; Pereira, Maria José Bistafa

    2017-06-01

    In 2009, the Secretary of State for Health of Sao Paulo created a Program with a view to qualify the primary care in the state. This proposal includes a new job function, namely the articulator of primary care. Due to the scarcity of information about the practice of these new professionals in the scientific literature, this article seeks to analyze how articulators interpret their function and how they describe their daily routines. Thirteen articulators were interviewed. The interviews were duly analyzed by qualitative delineation. The results describe three themes: 1)Roles of the articulator: technical communicator and political advisor; 2) Activities performed to comply with the expected roles, examples being diagnosis of the municipalities, negotiation of proposals, participation in meetings, visits to municipalities; and 3) Challenges of the role, which are configured as challenges to the health reform process, examples being the lack of physical and human resources, activities of professionals in the medical-centered model, among others. The conclusion drawn is that the Program has great potential to provide input for the development and enhancement of Primary Care. Nevertheless, there are a series of challenges to be overcome, namely challenges to the context per se.

  13. Optical Fiber Sensors For Monitoring Joint Articulation And Chest Expansion Of A Human Body

    Science.gov (United States)

    Muhs, Jeffrey D.; Allison, Stephen W.

    1997-12-23

    Fiber-optic sensors employing optical fibers of elastomeric material are incorporated in devices adapted to be worn by human beings in joint and chest regions for the purpose of monitoring and measuring the extent of joint articulation and chest expansion especially with respect to time.

  14. Articulation prostheses made of polymers which are improved by ionizing radiations

    International Nuclear Information System (INIS)

    Gaussens, G.; Nicaise, M.; Tran, K.O.

    1981-10-01

    Articulation prostheses for the human body are generally made of the couple very high molecular weight polyethylene-special steels. Polyethylene properties are modified by ionizing radiations: creep resistance is improved and friction coefficient is decreased. Modifications are controlled by the choice of radiation dose and dose rate. Wear tests have been made on hip prostheses [fr

  15. The Articulation of Secondary and Post-Secondary Vocational Education Programs. Workshop Products.

    Science.gov (United States)

    Keene State Coll., NH.

    As a result of the cooperative efforts in articulation by secondary/postsecondary instructor teams, six packages representing the occupational areas of child care, culinary arts, electronics, health occupations, power mechanics, and industrial welding were developed. Each package contains the following three components: a series of job titles…

  16. Comparison of mechanical properties of silicone and PVC (polyvinylchloride) cosmetic gloves for articulating hand prostheses

    NARCIS (Netherlands)

    Smit, G.; Plettenburg, D.H.

    2013-01-01

    Current articulating electric and body-powered hands have a lower pinch force (15–34 N) than electric hands with stiff fingers (55–100 N). The cosmetic glove, which covers a hand prosthesis, negatively affects the mechanical efficiency of a prosthesis. The goal of this study is to mechanically

  17. Feasibility of an LPN to ADN Articulation Program at LSUA. Vocational Education Research.

    Science.gov (United States)

    Louisiana State Univ., Alexandria.

    A feasibility study examined the need for and likelihood of success for a Licensed Practical Nurse (LPN) to Associate Degree in Nursing (ADN) articulation program for Louisiana State University (LSU) at Alexandria. Following a literature search on the theoretical establishment and implementation of such a program, three schools with successful…

  18. The Effect of Otitis Media on Articulation in Children with Cerebral Palsy.

    Science.gov (United States)

    Van der Vyver, Marguerite; And Others

    1988-01-01

    A study involving 20 Afrikaans-speaking children with cerebral palsy found that recurrent otitis media in early childhood had a negative effect on articulation abilities of the 7 to 11-year-old children but that other factors such as intelligence also played a role. (JDD)

  19. Articulated Multimedia Physics, Lesson 14, Gases, The Gas Laws, and Absolute Temperature.

    Science.gov (United States)

    New York Inst. of Tech., Old Westbury.

    As the fourteenth lesson of the Articulated Multimedia Physics Course, instructional materials are presented in this study guide with relation to gases, gas laws, and absolute temperature. The topics are concerned with the kinetic theory of gases, thermometric scales, Charles' law, ideal gases, Boyle's law, absolute zero, and gas pressures. The…

  20. Jazz Style and Articulation: How to Get Your Band or Choir to Swing

    Science.gov (United States)

    Tolson, Jerry

    2012-01-01

    The interpretation of jazz style is crucial to the element of swing in any jazz ensemble performance. Today, many charts for both large and small instrumental and vocal jazz ensembles are well marked with articulations and expression markings. However, in some cases, there is nothing to guide the musician. This article addresses some common jazz…

  1. Transfer and Articulation Issues between California Community Colleges and California State University

    Science.gov (United States)

    Tucker, Linda

    2013-01-01

    Purpose: The primary purpose of this study was to discover common transfer and articulation practices and to determine what practices aid in the implementation of the STAR Act between California Community Colleges and the California State University. The review of literature revealed a lack of research on the application of practices in transfer…

  2. Gender Equality in Media Content and Operations: Articulating Academic Studies and Policy--A Presentation

    Science.gov (United States)

    Lourenço, Mirta Edith

    2016-01-01

    In this article, Mirta Lourenço explains the prospects when higher education studies interface with UNESCO for policy change. The baseline is that education institutions' articulation with media organizations, media professionals, policy-makers, and civil society groups is essential to achieve gender equality in and through media.

  3. Articulating Scientific Practice: Understanding Dean Hamer's "Gay Gene" Study as Overlapping Material, Social and Rhetorical Registers

    Science.gov (United States)

    Lynch, John A.

    2009-01-01

    Rhetoricians have tried to develop a better understanding of the connection between words and things, but these attempts often employ a logic of representation that undermines a full examination of materiality and the complexity of scientific practice. A logic of articulation offers a viable alternative by focusing attention on the linkages…

  4. Articulation Rate and Vowel Space Characteristics of Young Males with Fragile X Syndrome: Preliminary Acoustic Findings

    Science.gov (United States)

    Zajac, David J.; Roberts, Joanne E.; Hennon, Elizabeth A.; Harris, Adrianne A.; Barnes, Elizabeth F.; Misenheimer, Jan

    2006-01-01

    Purpose: Increased speaking rate is a commonly reported perceptual characteristic among males with fragile X syndrome (FXS). The objective of this preliminary study was to determine articulation rate--one component of perceived speaking rate--and vowel space characteristics of young males with FXS. Method: Young males with FXS (n = 38), …

  5. Encouraging Student Reflection and Articulation Using a Learning Companion: A Commentary

    Science.gov (United States)

    Goodman, Bradley; Linton, Frank; Gaimari, Robert

    2016-01-01

    Our 1998 paper "Encouraging Student Reflection and Articulation using a Learning Companion" (Goodman et al. 1998) was a stepping stone in the progression of learning companions for intelligent tutoring systems (ITS). A simulated learning companion, acting as a peer in an intelligent tutoring environment ensures the availability of a…

  6. How Well Does Botswana's Social Studies Curriculum Articulate Gender Issues? A Preliminary Overview

    Science.gov (United States)

    Boikhutso, Keene

    2013-01-01

    In this paper I discuss the extent to Botswana's social studies curriculum is gendered thus more likely to reproduce gender inequalities. The paper locates gender issues within the broader context of male-dominated patriarchal society. It applies content analysis to establish whether or not the Social Studies syllabuses articulate gender issues. I…

  7. Articulation of Industrial R&D with Higher Education in the Telecommunications Sector in South Africa

    Science.gov (United States)

    Paterson, Andrew

    2005-01-01

    This article shows how and why particular higher education?industry research and development networks articulate with the South African telecommunications sector. The range of competing and complementary data telecommunications technologies available in the South African market provide varying opportunities for enterprises to engage in R&D. Two…

  8. Lost in Translation: Preparing Students to Articulate the Meaning of a College Degree

    Science.gov (United States)

    DuRose, Lisa; Stebleton, Michael J.

    2016-01-01

    The authors contend that many undergraduate students lack the ability to deftly articulate the value of their college degree, including the competencies they acquire through classroom learning and extracurricular activities. Despite the positive impact of experiential education opportunities such as service learning and internships, there is a…

  9. The superior precentral gyrus of the insula does not appear to be functionally specialized for articulation.

    Science.gov (United States)

    Fedorenko, Evelina; Fillmore, Paul; Smith, Kimberly; Bonilha, Leonardo; Fridriksson, Julius

    2015-04-01

    Broca (Broca P. Bull Soc Anat Paris 36: 330-357, 1861) influentially argued that posterior left inferior frontal gyrus supports speech articulation. According to an alternative proposal (e.g., Dronkers NF. Nature 384: 159-161, 1996; Wise RJ, Greene J, Buchel C, Scott SK. Lancet 353: 1057-1061, 1999; Baldo JV, Wilkins DP, Ogar J, Willock S, Dronkers NF. Cortex 47: 800-807, 2011), a region in the anterior insula [specifically, the superior precentral gyrus of the insula (SPGI)] is the seat of articulatory abilities. Moreover, Dronkers and colleagues have argued that the SPGI is functionally specialized for (complex) speech articulation. Here, we evaluate this claim using individual-subject functional MRI (fMRI) analyses (e.g., Fedorenko E, Hsieh PJ, Nieto-Castanon A, Whitfield-Gabrieli S, Kanwisher N. J Neurophysiol 104: 1177-1194, 2010). We find that the SPGI responds weakly, if at all, during articulation (parts of Broca's area respond 3-4 times more strongly) and does not show a stronger response to higher articulatory demands. This holds regardless of whether the SPGI is defined functionally (by selecting the most articulation-responsive voxels in the vicinity of the SPGI in each subject individually) or anatomically (by using masks drawn on each individual subject's anatomy). Critically, nonspeech oral movements activate the SPGI more strongly than articulation, especially under the anatomical definition of the SPGI. In line with Hillis et al. (Hillis AE, Work M, Barker PB, Jacobs MA, Breese EL, Maurer K. Brain 127: 1479-1487, 2004; also Trupe L, Varma DD, Gomez Y, Race D, Leigh R, Hillis AE, Gottesman RF. Stroke 44: 740-744, 2013), we argue that previous links between the SPGI, and perhaps anterior insula more generally, and articulation may be due to its high base rate of ischemic damage (and activation in fMRI; Yarkoni T, Poldrack RA, Nichols TE, Van Essen DC, Wager TD. Nat Methods 8: 665-670, 2011), combined with its proximity to regions that more directly

  10. Preliminary study on field buses for the control system of the high voltage of the ATLAS hadronic calorimeter; Etude preliminaire d`un reseau de terrain pour le systeme de controle des hautes tensions du calorimetre hadronique d`Atlas

    Energy Technology Data Exchange (ETDEWEB)

    Drevet, F.; Chadelas, R.; Montarou, G.

    1996-12-31

    We present here after a preliminary study on field buses for the control system of the high voltage of the photomultipliers of the TILECAL calorimeter. After some generalities, different commercial buses are reviewed (CAN, ARCET, WorldFIP, Profibus and LonWorks). The Profibus and LonWorks solution are more extensively studies as a possible solution for the high voltage system of the TILE hadronic calorimeter. (authors).

  11. Evaluation of city buses installed diesel particulate filter systems on fleet test; Diesel particulate filter system wo tosaishita rosen bus no soko chosa

    Energy Technology Data Exchange (ETDEWEB)

    Sudo, H [Japan Automobile Research Institute Inc., Tsukuba (Japan)

    1997-10-01

    An environmental air quality of suspended particulate matter is insufficient in the big city area. To reduce the particulate matter, improvement of engine and development of the Diesel Particulate Filter (DPF) system are carrying. The purpose of this report is to investigate a possibility of practical use of the city buses installed DPF systems. From March 1995, investigation for practical use of these DPF systems on a route buses was carried in regular service operation of the Tokyo and Yokohama Transportation Bureau. The investigation items are service situation, smoke density and preparation inspection. From the result for 2 years service operation, each DPF systems needed some failure correspondence. but these were not fatal problem on using the DPF system. Then the subject of relative to durability and reliability became clear, and the performance of a low particulate emission DPF system obtained the high value evaluation for users. 9 refs., 4 figs., 2 tabs.

  12. The effect of emotion on articulation rate in persistence and recovery of childhood stuttering.

    Science.gov (United States)

    Erdemir, Aysu; Walden, Tedra A; Jefferson, Caswell M; Choi, Dahye; Jones, Robin M

    2018-06-01

    This study investigated the possible association of emotional processes and articulation rate in pre-school age children who stutter and persist (persisting), children who stutter and recover (recovered) and children who do not stutter (nonstuttering). The participants were ten persisting, ten recovered, and ten nonstuttering children between the ages of 3-5 years; who were classified as persisting, recovered, or nonstuttering approximately 2-2.5 years after the experimental testing took place. The children were exposed to three emotionally-arousing video clips (baseline, positive and negative) and produced a narrative based on a text-free storybook following each video clip. From the audio-recordings of these narratives, individual utterances were transcribed and articulation rates were calculated. Results indicated that persisting children exhibited significantly slower articulation rates following the negative emotion condition, unlike recovered and nonstuttering children whose articulation rates were not affected by either of the two emotion-inducing conditions. Moreover, all stuttering children displayed faster rates during fluent compared to stuttered speech; however, the recovered children were significantly faster than the persisting children during fluent speech. Negative emotion plays a detrimental role on the speech-motor control processes of children who persist, whereas children who eventually recover seem to exhibit a relatively more stable and mature speech-motor system. This suggests that complex interactions between speech-motor and emotional processes are at play in stuttering recovery and persistency; and articulation rates following negative emotion or during stuttered versus fluent speech might be considered as potential factors to prospectively predict persistence and recovery from stuttering. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Impairment of vowel articulation as a possible marker of disease progression in Parkinson's disease.

    Directory of Open Access Journals (Sweden)

    Sabine Skodda

    Full Text Available PURPOSE: The aim of the current study was to survey if vowel articulation in speakers with Parkinson's disease (PD shows specific changes in the course of the disease. METHOD: 67 patients with PD (42 male and 40 healthy speakers (20 male were tested and retested after an average time interval of 34 months. Participants had to read a given text as source for subsequent calculation of the triangular vowel space area (tVSA and vowel articulation index (VAI. Measurement of tVSA and VAI were based upon analysis of the first and second formant of the vowels /α/, /i/and /u/ extracted from defined words within the text. RESULTS: At first visit, VAI values were reduced in male and female PD patients as compared to the control group, and showed a further decrease at the second visit. Only in female Parkinsonian speakers, VAI was correlated to overall speech impairment based upon perceptual impression. VAI and tVSA were correlated to gait impairment, but no correlations were seen between VAI and global motor impairment or overall disease duration. tVSA showed a similar reduction in the PD as compared to the control group and was also found to further decline between first and second examination in female, but not in male speakers with PD. CONCLUSIONS: Measurement of VAI seems to be superior to tVSA in the description of impaired vowel articulation and its further decline in the course of the disease in PD. Since impairment of vowel articulation was found to be independent from global motor function but correlated to gait dysfunction, measurement of vowel articulation might have a potential to serve as a marker of axial disease progression.

  14. Heat transfer analysis of frictional heat dissipation during articulation of femoral implants.

    Science.gov (United States)

    Davidson, J A; Gir, S; Paul, J P

    1988-12-01

    Previous studies have shown the tendency for frictional heating to occur during articulation of total hip systems in vitro under simulated hip loading conditions. The magnitude of this heating is sufficient to accelerate wear, creep, and oxidation degradation of the UHMWPE bearing surface. It was shown that ceramic articulating systems generate less frictional heating than polished cobalt alloy against UHMWPE. This frictional heating is expected to occur primarily for younger, heavier, and more active patients. Thus, long-term performance of the articulating hip system in these patients may not be that predicted from current, body-temperature wear, creep, and degradation studies. Although the tendency to generate frictional heat has been observed only during in vitro simulated hip loading, a heat transfer analysis of this phenomenon is presented to evaluate the ability of the hip joint to dissipate such heating in vivo. Additional experiments were performed using controlled resistance heaters inside a cobalt femoral head to verify the calculated levels of frictional heat and to assess the heat dissipation under simulated in vivo conditions. The effect of blood perfusion on the effective thermal conductivity of the joint capsule is also discussed. The present study describes and analyzes the various heat dissipation mechanisms present both in vitro and in vivo during articulation of metal and ceramic hip systems. From these tests and analyses, it is concluded that frictional heating in the reconstructed hip cannot be effectively removed, and that degredative elevated temperature processes can be expected to occur in vivo to both the UHMWPE and adjacent tissue under extended periods of excessive patient activity. This is particularly true for metal cobalt alloy femoral heads articulating on UHMWPE versus ceramic heads which generate significantly lower levels of heat.

  15. Reliability improvement of potential transformer and secondary circuit of 6 kV 1E-class buses in Qinshan nuclear power plant

    International Nuclear Information System (INIS)

    Qian Houjun

    2014-01-01

    There are design defects in potential transformer (PT) and secondary circuit of 6 kV 1E-class buses in Qinshan Nuclear Power Plant Nuclear Island. During the operating period, there happened several serious operational events (loss of power) caused by PT resonance. The essay analyses the defects of original design, and put forward corresponding modification measures, which have been carried out by two steps between 2009 and 2010, and after the modification the same problems have not happened again. (author)

  16. Technological capability assessment of suppliers to support product development: case study on a buses and coaches manufacturer

    Directory of Open Access Journals (Sweden)

    Lucas Comerlato

    2013-05-01

    Full Text Available Supply chain management has become a critical issue in the global collaboration scenario. Suppliers are not expected to provide just commodities or pre-defined components, but also collaborative engineering design solutions within the product development cycle. Thus, the selection criteria for defining supply partner go beyond the production and logistic capabilities, but must also include technical and engineering competence. This, in some sense, can be considered a common scenario of big companies, but is still challenging when dealing with SME´s. This work discusses how SME´s can be included in a supply chains taking in consideration a set of parameters to assess their technical competence related to product development collaboration. A set of eight parameters has been proposed to assess the engineering team competence, physical and technological structure and further legal responsibility. For each parameter values and weights were defined also. The assessment was applied to three companies that are suppliers of a buses and coaches manufacturer from Rio Grande do Sul, Brazil. The results show that even when dealing with objective parameters, the suppliers and costumer can have different perceptions about same issues.

  17. Consumption-efficient regulation and switching concepts for air conditioners in buses; Verbrauchseffiziente Regelungs- und Verschaltungskonzepte fuer Omnibusklimaanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Christian; Tegethoff, Wilhelm [TLK-Thermo GmbH, Braunschweig (Germany); Koehler, Juergen [TU Braunschweig (Germany). Inst. fuer Thermodynamik; Sonnekalb, Michael [Konvekta AG, Schwalmstadt (Germany)

    2012-07-01

    The reduction of the fuel consumption and the related reduction of CO{sub 2} emissions is one of the most important requirements in the current development of vehicles. This includes the development of fuel-efficient drive systems and the optimization of the so-called auxiliary users such as the air conditioner. The majority of the buses used today have an air conditioner in order to meet the increased demand of passengers for comfort. Since the operation of the air conditioner results in a significant increase in fuel consumption and thus in enhanced emissions of CO{sub 2}, an essential task of the development engineer is to minimize this additional consumption. In order to identify possible optimization potentials, a bus simulation model was developed which investigates not only exclusively compression refrigeration systems, but also is in communication with their relevant systems: heating circuit with engine cooling circuit, vehicle interior, on-board electrical system and vehicle longitudinal dynamics with the drive train. In the contribution under consideration, potentials of energy conservation should be identified that can be achieved due to the use of improved control and switching concepts. For this purpose, both the conventional R-744 (CO{sub 2}) bus air conditioning systems as well as alternative systems such as an ejector cycle were studied by means of a total vehicle simulation of the bus and compared.

  18. The effects of fuel characteristics and engine operating conditions on the elemental composition of emissions from heavy duty diesel buses

    Energy Technology Data Exchange (ETDEWEB)

    M.C.H. Lim; G.A. Ayoko; L. Morawska; Z.D. Ristovski; E.R. Jayaratne [Queensland University of Technology, Brisbane, Qld. (Australia). International Laboratory for Air Quality and Health, School of Physical and Chemical Sciences

    2007-08-15

    The effects of fuel characteristics and engine operating conditions on elemental composition of emissions from twelve heavy duty diesel buses have been investigated. Two types of diesel fuels - low sulfur diesel (LSD) and ultra low sulfur diesel (ULSD) fuels with 500 ppm and 50 ppm sulfur contents respectively and 3 driving modes corresponding to 25%, 50% and 100% power were used. Elements present in the tailpipe emissions were quantified by inductively coupled plasma mass spectrometry (ICPMS) and those found in measurable quantities included Mg, Ca, Cr, Fe, Cu, Zn, Ti, Ni, Pb, Be, P, Se, Ti and Ge. Multivariate analyses using multi-criteria decision making methods (MCDM), principal component analysis (PCA) and partial least squares (PLS) facilitated the extraction of information about the structure of the data. MCDM showed that the emissions of the elements were strongly influenced by the engine driving conditions while the PCA loadings plots showed that the emission factors of the elements were correlated with those of other pollutants such as particle number, total suspended particles, CO, CO{sub 2} and NOx. Partial least square analysis revealed that the emission factors of the elements were strongly dependent on the fuel parameters such as the fuel sulfur content, fuel density, distillation point and cetane index. Strong correlations were also observed between these pollutants and the engine power or exhaust temperature. The study provides insights into the possible role of fuel sulfur content in the emission of inorganic elements from heavy duty diesel vehicles. 39 refs., 1 fig., 4 tabs.

  19. Walking school buses as a form of active transportation for children-a review of the evidence.

    Science.gov (United States)

    Smith, Liz; Norgate, Sarah H; Cherrett, Tom; Davies, Nigel; Winstanley, Christopher; Harding, Mike

    2015-03-01

    Walking school buses (WSBs) offer a potentially healthier way for children to get to school while reducing traffic congestion. A number of pressing societal challenges make it timely to evaluate evidence of their value. Studies that focused solely on WSBs were identified through online and manual literature searches. Twelve WSB studies involving a total of 9169 children were reviewed. Study aims, designs, methods, outcomes, and barriers and facilitators were examined. WSBs were found to be associated with increased prevalence of walking to school and general activity levels although not always significantly. Time constraints emerged as barriers to WSBs, impacting on recruitment of volunteers and children to the WSBs. Facilitators of WSBs included children enjoying socializing and interacting with the environment. Preliminary evidence of the health value of WSBs was demonstrated, along with recommendations for the design of future studies. By tackling barriers of time constraints, volunteer recruitment, and parents' safety concerns while at the same time, increasing convenience and time savings for families, future WSBs are likely to be more sustainable and taken up by more schools. Implications for future innovation in school health were identified. © 2015, American School Health Association.

  20. GeoNeoLogical novel and other hybrimedia experiments: or how to use hybrid methods such as Hybrid Discourse Analysis (HDA within a knowledge base

    Directory of Open Access Journals (Sweden)

    Andrade, Pedro

    2016-07-01

    Full Text Available In this essay I will present some results of the project Public Communication of Art, which developed a seminal theory and methodology intended to cope with hybridity and new media literacy in our globalized and inter/transcultural world. Some of the methods used blend vision with touch and are called ‘hybrid methods’ or ‘hybrimethods’. Examples of these are, for instance, a Multitouch Interactive Table, a Multitouch Questionnaire, Trichotomies Game and GeoNeoLogic Novel, this last one being a hybrid novel activated by fusion of vision, touch and GPS coordinates. Another hybrimethod is a sort of discursive analysis, named Hybrid Discourse Analysis (HDA, which uses ‘semantic-logical networks’ organized by concepts and ‘relation-concepts’. HDA is here articulated with Critical Sociology and applied to the analysis of a text on Magic Realism, which is also a hybrid genre within the social field of literature.

  1. Hybrid Augmented Reality for Participatory Learning: The Hidden Efficacy of Multi-User Game-Based Simulation

    Science.gov (United States)

    Oh, Seungjae; So, Hyo-Jeong; Gaydos, Matthew

    2018-01-01

    The goal for this research is to articulate and test a new hybrid Augmented Reality (AR) environment for conceptual understanding. From the theoretical lens of embodied interaction, we have designed a multi-user participatory simulation called ARfract where visitors in a science museum can learn about complex scientific concepts on the refraction…

  2. System design and energetic characterization of a four-wheel-driven series–parallel hybrid electric powertrain for heavy-duty applications

    International Nuclear Information System (INIS)

    Wang, Enhua; Guo, Di; Yang, Fuyuan

    2015-01-01

    Highlights: • A novel four-wheel-driven series–parallel hybrid powertrain is proposed. • A system model and a rule-based control strategy are designed. • Energetic performance is compared to a rear-wheel-driven hybrid powertrain. • Less torsional oscillation and more robust regenerative braking are achieved. - Abstract: Powertrain topology design is vital for system performance of a hybrid electric vehicle. In this paper, a novel four-wheel-driven series–parallel hybrid electric powertrain is proposed. A motor is connected to the differential of the rear axle. An auxiliary power unit is linked to the differential of the front axle via a clutch. First, a mathematical model was established to evaluate the fuel-saving potential. A rule-based energy management algorithm was subsequently designed, and its working parameters were optimized. The hybrid powertrain system was applied to a transit bus, and the system characteristics were analyzed. Compared to an existing coaxial power-split hybrid powertrain, the fuel economy of the four-wheel-driven series–parallel hybrid powertrain can be at the same level under normal road conditions. However, the proposed four-wheel-driven series–parallel hybrid powertrain can recover braking energy more efficiently under road conditions with a low adhesive coefficient and can alleviate the torsional oscillation occurring at the existing coaxial power-split hybrid powertrain. Therefore, the four-wheel-driven series–parallel hybrid powertrain is a good solution for transit buses toward more robust performance.

  3. Warm-Up Effect in Panelist-Articulated-2-Alternative Forced Choice Test.

    Science.gov (United States)

    Bloom, David J; Baik, Hwa-Young; Lee, Soo-Yeun

    2018-01-01

    Panelist performance in discrimination tests has been shown to increase when warm-up samples are provided prior to the actual test. Samples are used prior to the actual test for the attribute articulation process of a panelist-articulated-2-alternative forced choice (PA-2-AFC) procedure; however, it is yet unknown if the pretest articulation phase adds to the power of this testing method as with the warm-up. The goal of the study was to determine if a "warm-up" effect was displayed in the PA-2-AFC test resulting in greater power compared to the researcher-designated-2-AFC (RD-2-AFC) test. A RD-2-AFC test, with and without warm-up samples, and a PA-2-AFC test were performed by 61 panelists. A reduced calorie, citrus-flavored, and carbonated beverage was used in the tests. During RD-2-AFC testing, panelists were asked to identify which sample was more sour. For PA-2-AFC testing, panelists individually articulated the nature and direction of the difference between the 2 samples through a pretesting articulation procedure. The articulated difference was, then, used in standard 2-AFC test procedure. A warm-up effect was observed when comparing the standard RD-2-AFC with and without warm-up samples. The addition of warm up samples significantly increased the power of the test, in addition, the PA-2-AFC method had lower power than the RD-2-AFC method. The increase in power with the addition of warm-up samples for the RD-2-AFC procedure supports literature findings on the benefit of providing warm-up samples. No warm-up effect can be attributed to the PA-2-AFC method evidenced by the overall low power observed, which may be attributed to sample complexity. Selecting a specified discrimination testing method is advantageous and can reduce costs of sensory testing, but has been considered unpractical when samples may differ in unknown ways. This research explores the use of panelist derived terms to circumvent the need for researchers to identify these differences and

  4. The history of articulators: the wonderful world of "grinders," Part 2.

    Science.gov (United States)

    Starcke, Edgar N; Engelmeier, Robert L

    2012-04-01

    This is the second article in a three-part series on the history of denture grinding devices. The first article reviewed the earliest attempts to mechanically grind the occlusion of artificial teeth from the manipulation of simple articulators to very elaborate and complex machines powered by hand cranks. This article explores motor-driven grinders, most driven by way of a belt-driven pulley powered by an external source. A few were self-contained; that is, the motor was mounted on the grinder base. There were basically two types of grinders: those with cast holders for mounting processed dentures and those with provisions for using articulators for that purpose. © 2012 by the American College of Prosthodontists.

  5. 3D-printing and mechanics of bio-inspired articulated and multi-material structures.

    Science.gov (United States)

    Porter, Michael M; Ravikumar, Nakul; Barthelat, Francois; Martini, Roberto

    2017-09-01

    3D-printing technologies allow researchers to build simplified physical models of complex biological systems to more easily investigate their mechanics. In recent years, a number of 3D-printed structures inspired by the dermal armors of various fishes have been developed to study their multiple mechanical functionalities, including flexible protection, improved hydrodynamics, body support, or tail prehensility. Natural fish armors are generally classified according to their shape, material and structural properties as elasmoid scales, ganoid scales, placoid scales, carapace scutes, or bony plates. Each type of dermal armor forms distinct articulation patterns that facilitate different functional advantages. In this paper, we highlight recent studies that developed 3D-printed structures not only to inform the design and application of some articulated and multi-material structures, but also to explain the mechanics of the natural biological systems they mimic. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Reprogramming the articulated robotic arm for glass handling by using Arduino microcontroller

    Science.gov (United States)

    Razali, Zol Bahri; Kader, Mohamed Mydin M. Abdul; Kadir, Mohd Asmadi Akmal; Daud, Mohd Hisam

    2017-09-01

    The application of articulated robotic arm in industries is raised due to the expansion of using robot to replace human task, especially for the harmful tasks. However a few problems happen with the program use to schedule the arm, Thus the purpose of this project is to design, fabricate and integrate an articulated robotic arm by using Arduino microcontroller for handling glass sorting system. This project was designed to segregate glass and non-glass waste which would be pioneer step for recycling. This robotic arm has four servo motors to operate as a whole; three for the body and one for holding mechanism. This intelligent system is controlled by Arduino microcontroller and build with optical sensor to provide the distinguish objects that will be handled. Solidworks model was used to produce the detail design of the robotic arm and make the mechanical properties analysis by using a CAD software.

  7. Prevention of violence against women: challenges in the articulation of an intersetorial network

    Directory of Open Access Journals (Sweden)

    Patrícia Krieger Grossi

    2012-11-01

    Full Text Available This article has the objective of highlighting the importance of sectoriality action in the prevention of violence against women through the articulation of different social actors concerned and committed to the reduction of the violence against women rates, and consequently with a more fair and equal society. These challenges in the articulation of the network of protection services for women in domestic violence are illustrated by the managers of the social welfare policies, coordinators of women´s policies and professionals that work in Reference Centers for Women, Reference Centers of Social Welfare (CRAS and Specialized Reference Center of Social Welfare (CREAS in municipalities of the State of Rio Grande do Sul.

  8. Aberrant articulation of cervical vertebral transverse process: An uncommon normal variant and review of the literature

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Jeong Ah; Cha, Seung Woo [Dept. of Radiology, Hanyang University College of Medicine, Guri Hospital, Guri (Korea, Republic of); Song, Yoon Ah; Lee, Seung Hun; Joo, Kyung Bin [Dept. of Radiology, Hanyang University College of Medicine, Seoul Hospital, Seoul (Korea, Republic of)

    2013-09-15

    Aberrant articulation between two anterior tubercles is a rare congenital anomaly that should be considered for patients showing a bony projection anterior to the vertebral body on a lateral radiograph of the cervical spine. We present a case of an elongation of the anterior tubercles of the transverse processes of both the fifth and sixth cervical vertebrae. This finding is probably a form of supernumerary cervical rib developing at a level above the lowest cervical spine.

  9. Aberrant articulation of cervical vertebral transverse process: An uncommon normal variant and review of the literature

    International Nuclear Information System (INIS)

    Ryu, Jeong Ah; Cha, Seung Woo; Song, Yoon Ah; Lee, Seung Hun; Joo, Kyung Bin

    2013-01-01

    Aberrant articulation between two anterior tubercles is a rare congenital anomaly that should be considered for patients showing a bony projection anterior to the vertebral body on a lateral radiograph of the cervical spine. We present a case of an elongation of the anterior tubercles of the transverse processes of both the fifth and sixth cervical vertebrae. This finding is probably a form of supernumerary cervical rib developing at a level above the lowest cervical spine.

  10. A new attachment for mock surgery in Hanau wide-vue arcon articulator

    Directory of Open Access Journals (Sweden)

    Kanhu Charan Sahoo

    2014-01-01

    Full Text Available Over few decades, orthognathic surgery has become a routine procedure for the correction of facial deformities. People have become more aware and concerned about maxillofacial deformations. Articulators are of interest to both orthodontic and maxillofacial team as they facilitate the planning of combined orthodontic treatment and orthognathic surgery. A new attachment was designed in order to the limitations of the manual method.

  11. Informal work and formal plans: articulating the active role of patients in cancer trajectories

    DEFF Research Database (Denmark)

    Dalsted, Rikke Juul; Hølge-Hazelton, Bibi; Brostrøm Kousgaard, Marius

    2012-01-01

    Introduction: Formal pathway models outline that patients should receive information in order to experience a coherent journey but do not describe an active role for patients or their relatives. The aim of this is paper is to articulate and discuss the active role of patients during their cancer ...... participation. When looking at integrated care from the perspective of patients, the development of a more holistic and personalized approach is needed....

  12. Informal work and formal plans: Articulating the active role of patients in cancer trajectories

    DEFF Research Database (Denmark)

    Dalsted, R.; Hølge-Hazelton, Bibi; Kousgaard, MB

    2013-01-01

    Formal pathways models outline that patients should receive information in order to experience a coherent journey but do not describe an active role for patients or their relatives. The aim of this is paper is to articulate and discuss the active role of patients during their cancer trajectories........ When looking at integrated care from the perspective of patients, the development of a more holistic and personalized approach is needed....

  13. Connections of Grasping and Horizontal Hand Movements with Articulation in Czech Speakers

    Czech Academy of Sciences Publication Activity Database

    Tiainen, M.; Lukavský, Jiří; Tiippana, K.; Vainio, M.; Šimko, J.; Felisberti, F.; Vainio, L.

    2017-01-01

    Roč. 8, duben (2017), s. 1-10, č. článku 516. ISSN 1664-1078 Grant - others:AV ČR(CZ) StrategieAV21/14 Program:StrategieAV Institutional support: RVO:68081740 Keywords : articulation * motor actions * language * grasping * manual gestures * speech * manual actions Subject RIV: AN - Psychology OBOR OECD: Cognitive sciences Impact factor: 2.323, year: 2016

  14. The nature of articulation errors in Egyptian Arabic-speaking children with velopharyngeal insufficiency due to cleft palate.

    Science.gov (United States)

    Abou-Elsaad, Tamer; Baz, Hemmat; Afsah, Omayma; Mansy, Alzahraa

    2015-09-01

    Even with early surgical repair, the majority of cleft palate children demonstrate articulation errors and have typical cleft palate speech. Was to determine the nature of articulation errors of Arabic consonants in Egyptian Arabic-speaking children with velopharyngeal insufficiency (VPI). Thirty Egyptian Arabic-speaking children with VPI due to cleft palate (whether primary repaired or secondary repaired) were studied. Auditory perceptual assessment (APA) of children speech was conducted. Nasopharyngoscopy was done to assess the velopharyngeal port (VPP) movements while the child was repeating speech tasks. Mansoura Arabic Articulation test (MAAT) was performed to analyze the consonants articulation of these children. The most frequent type of articulatory errors observed was substitution, more specifically, backing. Pharyngealization of anterior fricatives was the most frequent substitution, especially for the /s/ sound. The most frequent substituting sounds for other sounds were /ʔ/ followed by /k/ and /n/ sounds. Significant correlations were found between the degrees of the open nasality and VPP closure and the articulation errors. On the other hand, the sounds (/ʔ/,/ħ/,/ʕ/,/n/,/w/,/j/) were normally articulated in all studied group. The determination of articulation errors in VPI children could guide the therapists for designing appropriate speech therapy programs for these cases. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  15. Hybrid Qualifications

    DEFF Research Database (Denmark)

    Against the background of increasing qualification needs there is a growing awareness of the challenge to widen participation in processes of skill formation and competence development. At the same time, the issue of permeability between vocational education and training (VET) and general education...... has turned out as a major focus of European education and training policies and certainly is a crucial principle underlying the European Qualifications Framework (EQF). In this context, «hybrid qualifications» (HQ) may be seen as an interesting approach to tackle these challenges as they serve «two...

  16. Hybrid Gear

    Science.gov (United States)

    Handschuh, Robert F. (Inventor); Roberts, Gary D. (Inventor)

    2016-01-01

    A hybrid gear consisting of metallic outer rim with gear teeth and metallic hub in combination with a composite lay up between the shaft interface (hub) and gear tooth rim is described. The composite lay-up lightens the gear member while having similar torque carrying capability and it attenuates the impact loading driven noise/vibration that is typical in gear systems. The gear has the same operational capability with respect to shaft speed, torque, and temperature as an all-metallic gear as used in aerospace gear design.

  17. COMPARATIVE ANALISYS OF ARTICULATION AND PHONOLOGY DISORDERS IN FUNCTION OF DIFFERENTIAL DIAGNOSIS

    Directory of Open Access Journals (Sweden)

    Ana POPOSKA

    2010-04-01

    Full Text Available Sound expression is the first impression of speech and language. Whatever its origin, false pronunciation is the first sign. In the early school years of developmental speech – if a language disorder appears, it is often followed by the disruption of the phonological – articulation segment.This research aims to establish and compare frequency, type, and every articulate and acoustic characteristics of the disordered sound in both children with Dyslalia, as well as those with SLI.This micro investigation was done using 71 examinees ages 6 to 8. Thirty-five examinees were with Dyslalia and 36 had SLI. Their achievements are underlined using comparative analysis, tested with two relevant tests.Some of the more important conclusions are:Children with Dyslalia mostly showed distorted sounds, while those with SLI mostly substituted the disordered sound. In Dyslalia, fricatives were most affected, but in the case of SLI, all sound groups were disordered usually. In both tested groups, the type of disorder was due to the misplacement of sound formation. All children having articulation disorders while also having sound discrimination have not only phonetic contrasts, but were also being influenced by the rest of the linguistic aspects.

  18. Dynamically adapted context-specific hyper-articulation: Feedback from interlocutors affects speakers’ subsequent pronunciations

    Science.gov (United States)

    Buz, Esteban; Tanenhaus, Michael K.; Jaeger, T. Florian

    2016-01-01

    We ask whether speakers can adapt their productions when feedback from their interlocutors suggests that previous productions were perceptually confusable. To address this question, we use a novel web-based task-oriented paradigm for speech recording, in which participants produce instructions towards a (simulated) partner with naturalistic response times. We manipulate (1) whether a target word with a voiceless plosive (e.g., pill) occurs in the presence of a voiced competitor (bill) or an unrelated word (food) and (2) whether or not the simulated partner occasionally misunderstands the target word. Speakers hyper-articulated the target word when a voiced competitor was present. Moreover, the size of the hyper-articulation effect was nearly doubled when partners occasionally misunderstood the instruction. A novel type of distributional analysis further suggests that hyper-articulation did not change the target of production, but rather reduced the probability of perceptually ambiguous or confusable productions. These results were obtained in the absence of explicit clarification requests, and persisted across words and over trials. Our findings suggest that speakers adapt their pronunciations based on the perceived communicative success of their previous productions in the current environment. We discuss why speakers make adaptive changes to their speech and what mechanisms might underlie speakers’ ability to do so. PMID:27375344

  19. Conceptual design main progress of EAST Articulated Maintenance Arm (EAMA) system

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Shanshuang, E-mail: shiss@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland); Song, Yuntao; Cheng, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Villedieu, Eric; Bruno, Vincent [CEA-IRFM, F-13108 Saint-Paul-Lez-Durance (France); Feng, Hansheng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Wu, Huapeng [Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland); Wang, Peng [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Hao, Zhiwei; Li, Yang; Wang, Kun; Pan, Hongtao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

    2016-03-15

    Highlights: • EAST Articulated Maintenance Arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM. • Conceptual design for a 3-DOF wrist end effector with gripper has been finished. • Kinematic design can reach 90% of the workspace inside EAST tokamak vessel. • A prototype of EAMA arm segment has been built to validate the design. - Abstract: EAST articulated maintenance arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM for the purpose of remote inspection and simple maintenance operations in EAST vacuum vessel during physical experiments without breaking the ultra-high vacuum condition. The EAMA system design is based on a similar articulated inspection arm robot successfully demonstrated in Tore Supra in 2008. In order to better meet EAST configurations and maintenance requirements, optimized mechanisms and dimensions are considered for EAMA robot as upgrades. Besides, the segmented arm is equipped with a 3-DOF wrist end effector and gripper for gripping operation as well as inspection. Some calculations and simulations on statics, kinematics and workspace of EAMA have been presented to validate the feasibility. This paper introduces the overall design of the EAMA robot and presents implementation progress.

  20. A technique for the quantification of the 3D connectivity of thin articulations in bony sutures.

    Science.gov (United States)

    Maloul, Asmaa; Fialkov, Jeffrey; Hojjat, Seyed-Parsa; Whyne, Cari M

    2010-04-19

    The anatomy and development of cranial and facial sutures have been studied in detail using histological sections, 2D radiographs and more recently CT imaging. However, little attention has been paid to evaluating and quantifying the connectivity of these thin cortical bone articulations. More recent technological advances such as micro-CT imaging has the potential to be used to provide quantitative measurements of 3D connectivity in bony articulations. This study presents a new technique for quantifying the connectivity of bony projections inside cranial and facial sutures using a combination of skeletonization, thinning algorithms and 3D intensity mapping. The technique is demonstrated in five sutures through semi-automated analysis and image processing of microCT scans. In the sagittal, coronal and frontozygomatic sutures an average bone connectivity of 6.6-11.6% was found with multiple bony projections providing an interlocking structure between adjacent bones. Much higher bone connectivity was present in the zygomaticotemporal and zygomaticomaxillary sutures (22.7-37.4%) with few bony projections. This method combining microCT scanning and image processing techniques was successfully used to quantify the connectivity of thin bone articulations and allowed detailed assessment of sutural fusion in 3D. The wider application of this technique may allow quantification of connectivity in other structures, in particular fracture healing of long bones. Copyright 2009 Elsevier Ltd. All rights reserved.

  1. Comparison of three facebow/semi-adjustable articulator systems for planning orthognathic surgery.

    Science.gov (United States)

    O'Malley, A M; Milosevic, A

    2000-06-01

    Our aim was to measure the steepness of the occlusal plane produced by three different semi-adjustable articulators: the Dentatus Type ARL, Denar MkII, and the Whipmix Quickmount 8800, and to assess the influence of possible systematic errors in positioning of study casts on articulators that are used to plan orthognathic surgery. Twenty patients (10 skeletal class II, and 10 skeletal class III) who were having pre-surgical orthodontics at Liverpool University Dental Hospital were studied. The measurement of the steepness of the occlusal plane was taken as the angle between the facebow bite-fork and the horizontal arm of the articulator. This was compared with the angle of the maxillary occlusal plane to the Frankfort plane as measured on lateral cephalometry (the gold standard). The Whipmix was closest to the gold standard as it flattened the occlusal plane by only 2 degrees (P<0.05). The results of the Denar and Dentatus differed significantly from those of the cephalogram as they flattened the occlusal plane by 5 degrees and 6. 5 degrees (P<0.01), respectively. Clinicians are encouraged to verify the steepness of the occlusal plane on mounted study casts before the technician makes the model. Copyright 2000 The British Association of Oral and Maxillofacial Surgeons.

  2. Digital Hardware Realization of Forward and Inverse Kinematics for a Five-Axis Articulated Robot Arm

    Directory of Open Access Journals (Sweden)

    Bui Thi Hai Linh

    2015-01-01

    Full Text Available When robot arm performs a motion control, it needs to calculate a complicated algorithm of forward and inverse kinematics which consumes much CPU time and certainty slows down the motion speed of robot arm. Therefore, to solve this issue, the development of a hardware realization of forward and inverse kinematics for an articulated robot arm is investigated. In this paper, the formulation of the forward and inverse kinematics for a five-axis articulated robot arm is derived firstly. Then, the computations algorithm and its hardware implementation are described. Further, very high speed integrated circuits hardware description language (VHDL is applied to describe the overall hardware behavior of forward and inverse kinematics. Additionally, finite state machine (FSM is applied for reducing the hardware resource usage. Finally, for verifying the correctness of forward and inverse kinematics for the five-axis articulated robot arm, a cosimulation work is constructed by ModelSim and Simulink. The hardware of the forward and inverse kinematics is run by ModelSim and a test bench which generates stimulus to ModelSim and displays the output response is taken in Simulink. Under this design, the forward and inverse kinematics algorithms can be completed within one microsecond.

  3. Effect of visual biofeedback of posterior tongue movement on articulation rehabilitation in dysarthria patients.

    Science.gov (United States)

    Yano, J; Shirahige, C; Oki, K; Oisaka, N; Kumakura, I; Tsubahara, A; Minagi, S

    2015-08-01

    Articulation is driven by various combinations of movements of the lip, tongue, soft palate, pharynx and larynx, where the tongue plays an especially important role. In patients with cerebrovascular disorder, lingual motor function is often affected, causing dysarthria. We aimed to evaluate the effect of visual biofeedback of posterior tongue movement on articulation rehabilitation in dysarthria patients with cerebrovascular disorder. Fifteen dysarthria patients (10 men and 5 women; mean age, 70.7 ± 10.3 years) agreed to participate in this study. A device for measuring the movement of the posterior part of the tongue was used for the visual biofeedback. Subjects were instructed to produce repetitive articulation of [ka] as fast and steadily as possible between a lungful with/without visual biofeedback. For both the unaffected and affected sides, the range of ascending and descending movement of the posterior tongue with visual biofeedback was significantly larger than that without visual biofeedback. The coefficient of variation for these movements with visual biofeedback was significantly smaller than that without visual biofeedback. With visual biofeedback, the range of ascent exhibited a significant and strong correlation with that of descent for both the unaffected and affected sides. The results of this study revealed that the use of visual biofeedback leads to prompt and preferable change in the movement of the posterior part of the tongue. From the standpoint of pursuing necessary rehabilitation for patients with attention and memory disorders, visualization of tongue movement would be of marked clinical benefit. © 2015 John Wiley & Sons Ltd.

  4. Simulated stability tests of a small articulated tractor designed for extreme-sloped vineyards

    Directory of Open Access Journals (Sweden)

    F. Mazzetto

    2013-09-01

    Full Text Available A new reversible wheeled articulated tractor, designed to work in terraced vineyards trained with “pergola” system, common in mountain areas, is here described in its latest version and analysed through numerical simulations. This tractor has small dimensions, necessary to operate in that environment, and its central articulation has two rotational degrees-offreedom. The described features are surely strong design points but could be critical for vehicle’s stability, as affecting the supporting base’s dimensions and shape. Therefore, the tractor was equipped with a new automatic safety system: a self-locking articulation activated by contact sensors on the wheels. This device makes the vehicle partially-rigid in case of lateral unbalancing, so that rollover can happen only by overcoming the whole vehicle mass. A mathematical description of vehicle-ground interactions was implemented to deeply inquiry the tractor behaviour in different configurations (straight, angled at increasing values of ground slope; roll and pitch stability indexes were then computed and used for comparisons with conventional tractors. Thanks to the low centre-of-gravity, the resulting rollover angle with the vehicle in straight configuration is promising (43.8°→96%: it is greater than the maximum lateral (20°→36% and frontal (38°→78% slope angle ever recorded on terraced vineyards. The same rollover angle is lower when the tractor turns.

  5. Articulation Speaks to Executive Function: An Investigation in 4- to 6-Year-Olds

    Directory of Open Access Journals (Sweden)

    Nicole Netelenbos

    2018-02-01

    Full Text Available Executive function (EF and language learning play a prominent role in early childhood development. Empirical research continues to point to a concurrent relation between these two faculties. What has been given little attention, however, is the association between EF and speech articulation abilities in children. This study investigated this relation in children aged 4–6 years. Significant correlations indicated that children with better EF [via parental report of the Behavior Rating Inventory of Executive Function (BRIEF inventory] exhibited stronger speech sound production abilities in the articulation of the “s” and “sh” sounds. Furthermore, regression analyses revealed that the Global Executive Composite (GEC of EF as measured by the BRIEF, served as a predictor for speech sound proficiency and that speech sound proficiency served as a predictor for the GEC. Together, these results demonstrate the imbricated nature of EF and speech sound production while bearing theoretical and practical implications. From a theoretical standpoint, the close link between EF and speech articulation may indicate a common ontogenetic pathway. From a practical perspective, the results suggest that children with speech difficulties could be at higher risk for EF deficits.

  6. Conceptual design main progress of EAST Articulated Maintenance Arm (EAMA) system

    International Nuclear Information System (INIS)

    Shi, Shanshuang; Song, Yuntao; Cheng, Yong; Villedieu, Eric; Bruno, Vincent; Feng, Hansheng; Wu, Huapeng; Wang, Peng; Hao, Zhiwei; Li, Yang; Wang, Kun; Pan, Hongtao

    2016-01-01

    Highlights: • EAST Articulated Maintenance Arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM. • Conceptual design for a 3-DOF wrist end effector with gripper has been finished. • Kinematic design can reach 90% of the workspace inside EAST tokamak vessel. • A prototype of EAMA arm segment has been built to validate the design. - Abstract: EAST articulated maintenance arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM for the purpose of remote inspection and simple maintenance operations in EAST vacuum vessel during physical experiments without breaking the ultra-high vacuum condition. The EAMA system design is based on a similar articulated inspection arm robot successfully demonstrated in Tore Supra in 2008. In order to better meet EAST configurations and maintenance requirements, optimized mechanisms and dimensions are considered for EAMA robot as upgrades. Besides, the segmented arm is equipped with a 3-DOF wrist end effector and gripper for gripping operation as well as inspection. Some calculations and simulations on statics, kinematics and workspace of EAMA have been presented to validate the feasibility. This paper introduces the overall design of the EAMA robot and presents implementation progress.

  7. Intuitionistic hybrid logic

    DEFF Research Database (Denmark)

    Braüner, Torben

    2011-01-01

    Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area.......Intuitionistic hybrid logic is hybrid modal logic over an intuitionistic logic basis instead of a classical logical basis. In this short paper we introduce intuitionistic hybrid logic and we give a survey of work in the area....

  8. Report on FS survey for project of introduction of highly energy-efficient trolley buses into the Mexico Metropolitan Area in FY 1997; 1997 nendo chosa hokokusho (Mexico city eno sho energy gata trolley bus donyu project FS chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Traffic jam and air pollution by automobiles are currently getting severe in the Mexico Metropolitan Area. Trolley buses were introduced for improving the environment more than ten years ago. Vehicles become too old for use, and their energy efficiency is low. In this project, 200 highly energy-efficient trolley buses are introduced to replace old inefficient trolley buses, which results in the improved traffic convenience in the City and enhanced energy efficiency. The new energy-efficient trolley buses are made of energy-efficient control VVVF inverters produced and exported by MELCO (Mitsubishi Electric Corporation), energy-efficient motors by MELMEX (Mitsubishi Electric Corporation, Mexico), and bodies by MASA which is a major manufacturer of bus bodies. The objective of this research is to analyze the background of introduction of new energy-efficient trolley buses and the effects of the present project. The results of analysis are going to be utilized for future promotion of the Joint Implementation and Clean Development Mechanism. 30 refs., 30 figs., 24 tabs.

  9. Hybridized Tetraquarks

    CERN Document Server

    Esposito, A.; Polosa, A.D.

    2016-01-01

    We propose a new interpretation of the neutral and charged X, Z exotic hadron resonances. Hybridized-tetraquarks are neither purely compact tetraquark states nor bound or loosely bound molecules. The latter would require a negative or zero binding energy whose counterpart in h-tetraquarks is a positive quantity. The formation mechanism of this new class of hadrons is inspired by that of Feshbach metastable states in atomic physics. The recent claim of an exotic resonance in the Bs pi+- channel by the D0 collaboration and the negative result presented subsequently by the LHCb collaboration are understood in this scheme, together with a considerable portion of available data on X, Z particles. Considerations on a state with the same quantum numbers as the X(5568) are also made.

  10. Emergency and Disaster Preparedness of School Transportation Staff and School Buses in the United States: Compliance With Recommendations for School Transportation Safety.

    Science.gov (United States)

    Olympia, Robert P; Weber, Christopher; Brady, Jodi; Ho, Susana

    2017-11-01

    The aim of the study was to determine the compliance of school transportation staff and school buses with recommendations for the safe transportation of children to and from school and school-related activities. An electronic questionnaire was distributed to school transportation staff represented by the International Brotherhood of Teamsters during the 2013-2014 academic year. Analysis was performed on 558 completed questionnaires (13% usable response rate). Responders had previous training in first aid (89%), basic life support (28%), and cardiopulmonary resuscitation (52%). Seventy-eight percent of school buses in our sample had restraint devices and 87% had seat belt cutters. Responders reported the immediate availability of the following on their bus: communication devices (81%), first aid kits (97%), fire extinguishers (89%), automated external defibrillators (1%), and epinephrine autoinjectors (2%). Thirty percent of responders have had no previous training in the management of emergencies such as trouble breathing, severe allergic reaction, seizures, cardiac arrest or unresponsiveness, and head, neck, or extremity trauma. Thirteen percent of responders are unfamiliar with or have had no previous training on protocols regarding emergency shelters and community evacuation plans in the event of a disaster. Variability exists in the compliance of school transportation staff and school buses with recommendations for the safe transportation of children. Areas for improvement were identified, such as educating school transportation staff in the recognition and initial management of pediatric emergencies, ensuring the presence of restraint devices, increasing the immediate availability of certain emergency medications and equipment, and familiarizing school transportation staff with designated emergency shelters and community evacuation plans.

  11. Comparison of Life Cycle energy consumption and GHG emissions of natural gas, biodiesel and diesel buses of the Madrid transportation system

    International Nuclear Information System (INIS)

    García Sánchez, Juan Antonio; López Martínez, José María; Lumbreras Martín, Julio; Flores Holgado, Maria Nuria

    2012-01-01

    This paper presents a comparative study on the use of three after-treatment technologies: i) EGR + DPF, ii) SCR + Urea and iii) 3-way catalyst when implemented in urban buses, to determinate the energy requirements, greenhouse gas emissions (GHG), direct Land Use Change (dLUC), abiotic depletion of fossil energy by means of a Life Cycle Assessment (LCA). The process of production, conditioning and transporting of the fuels used by the buses (diesel, biodiesel (B100), a blended biodiesel at 20% (B20) and natural gas) were also analyzed (Well-to-Tank analysis) along with the environmental impact due to its combustion in the bus (Tank-to-Wheel analysis). The environmental impact of the manufacturing, maintenance and recycling process of the urban buses and exhaust after-treatment systems has also been evaluated. Main results shows that Life Cycle of SCR + Urea technology reduces environmental impact to a greater extent than its global Life Cycle increases it when gasoil is used resulting in a final balance more efficient than the other options, the same behavior is observed with the use of B20 and B100 but only when 0%dLUC is assumed since if the percentage of dLUC increases the effectiveness of the SCR + Urea technology in the reduction of environmental impact tend to decrease. -- Highlights: ► We examine the environmental impact caused by the Life Cycle of each technology, fossil fuel, biofuel and vehicle. ► Biodiesel environmental impact depends largely on land transformed for grow crops. ► Using SCR + Urea technology and gasoil as a fuel in the bus further reduces the environmental impact.

  12. Beyond the functional matrix hypothesis: a network null model of human skull growth for the formation of bone articulations.

    Science.gov (United States)

    Esteve-Altava, Borja; Rasskin-Gutman, Diego

    2014-09-01

    Craniofacial sutures and synchondroses form the boundaries among bones in the human skull, providing functional, developmental and evolutionary information. Bone articulations in the skull arise due to interactions between genetic regulatory mechanisms and epigenetic factors such as functional matrices (soft tissues and cranial cavities), which mediate bone growth. These matrices are largely acknowledged for their influence on shaping the bones of the skull; however, it is not fully understood to what extent functional matrices mediate the formation of bone articulations. Aiming to identify whether or not functional matrices are key developmental factors guiding the formation of bone articulations, we have built a network null model of the skull that simulates unconstrained bone growth. This null model predicts bone articulations that arise due to a process of bone growth that is uniform in rate, direction and timing. By comparing predicted articulations with the actual bone articulations of the human skull, we have identified which boundaries specifically need the presence of functional matrices for their formation. We show that functional matrices are necessary to connect facial bones, whereas an unconstrained bone growth is sufficient to connect non-facial bones. This finding challenges the role of the brain in the formation of boundaries between bones in the braincase without neglecting its effect on skull shape. Ultimately, our null model suggests where to look for modified developmental mechanisms promoting changes in bone growth patterns that could affect the development and evolution of the head skeleton. © 2014 Anatomical Society.

  13. Continuity controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation

  14. Continuity Controlled Hybrid Automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  15. Continuity controlled hybrid automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2004-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  16. Continuity controlled hybrid automata

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2006-01-01

    We investigate the connections between the process algebra for hybrid systems of Bergstra and Middelburg and the formalism of hybrid automata of Henzinger et al. We give interpretations of hybrid automata in the process algebra for hybrid systems and compare them with the standard interpretation of

  17. The articulation of Mexico into the dynamics of competition of the North American natural gas market

    International Nuclear Information System (INIS)

    Elizalde Baltierra, A.

    2002-07-01

    Deregulation is at the origin of the new dynamics of competition in the natural gas industry. The United States and Canada were the pioneer countries to suffer these changes. In fact, their natural gas markets today function in a very similar way: i) the private sector takes a place as large as possible, and ii)competition is developed within the three segments of the gas value, especially at the upstream level (emergence of hubs, spot and financial markets,...). In Mexico, its downstream gas activities (transportation, storage and distribution) were liberalized in 1995 in order to attract private investments and to develop the gas sector that has historically been operated under State control. Gas upstream operations remain reserved by the Constitution to the national oil company Petroleos Mexicanos (PEMEX). This thesis develops an evaluation framework of the articulation of Mexico into the dynamics of competition of the North American natural gas market, based on the structure-conduct-performance paradigm. In the first part, all North American's natural gas industries base conditions are analyzed. We examine in the second part, the deregulation and articulation of the dynamics of competition of the American and Canadian gas industries. Finally, in the third part we analyze the main elements of the articulation of Mexico into the dynamics of competition of United States and Canada's gas industries. Furthermore, we evaluate the impact of three of these elements (the economic growth, the electric power generation sector and eventually opening to private investments of gas upstream activities) on the adjustment of gas supply and demand in Mexico to the year 2020. (author)

  18. Treatment of complex osteoarticular injuries of the elbow with external unilateral articulated fixator

    International Nuclear Information System (INIS)

    Cuellar Gallo, Lazaro; Portilla Carrillo, Armando; Calderon Uribe, Oscar; Calvache Currea, Gustavo Adolfo; Satizabal Azuero, Carlos Arnulfo

    2001-01-01

    Previous observations suggest that conventional treatment of complex injuries about the elbow such as open; reduction and internal Fixation might lead, to bad functional outcome. The authors present a descriptive, observational and prospective study of a series of cases, on 8 patients, average age 37.8 years (25-28 years) 6 men and 2 women with complex injury of the elbow. Due to trauma which etiology is summarized as follows intraarticular comminuted open fracture secondary to gunshot wound 5 patients (62.5%); luxofracture 2 patients (25%), lntraarticular comminuted closed fracture 1 patient (12.5%). The patients where followed for 8 to 20 months. Were performed en 75% of patients open reduction, internal fixation of radial resection of radial head en 25% when comminute fracture of the head was found. All patients were treated with an external unilateral articulated fixation on the elbow, in order to protect the internal fixation, allow early joint motion and give early mobility. All patients were evaluated with Mayo scale, obtaining good results, with externals fixation treatment. In one case (12.5%) a dyaphiseal fracture of the humerus, occurred as an inherent complication secondary to the use of the external fixation, after it's withdrawal. This patient was treated with open reduction and internal fixation of the fracture, without significant impairment of the final result. Early results suggest that the use of unilateral articulated external fixator for the treatment of complex fractures about the elbow has great advantages over the other treatment techniques, such as the early motion of the elbow, dynamic protection of the internal fixation and preservation of the articulate stability, even when ligament injury is present

  19. Major upgrade of the articulated inspection arm control system to fulfill daily operation requirements

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, P., E-mail: patrick.pastor@cea.fr [CEA, IRFM, Institut de Recherche sur la Fusion par confinement Magnétique (France); Villedieu, E.; Allegretti, L.; Vincent, B.; Barbuti, A.; Bruno, V.; Coquillat, P.; Dechelle, C.; Gargiulo, L.; Le, R.; Malard, P.; Martinez, A.; Nouailletas, R. [CEA, IRFM, Institut de Recherche sur la Fusion par confinement Magnétique (France); Yuntao, Song; Yong, Cheng; Chen, Liu; Hansheng, Feng; Shanshuang, Shi [ASIPP, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China)

    2015-10-15

    Highlights: • We propose an overview of the work which has been done to upgrade the control system of the AIA robot (articulated inspection arm) to fulfill daily operation requirements for tokamak inspection. • The control system is based on the use of new position sensors, new electronics design and new supervisor software. • Final tests are ongoing in the EAST scale 1 tokamak mock-up. Routine operation of the robot at EAST will start in the beginning of 2015. - Abstract: An articulated inspection arm (AIA) has been developed by CEA for visual inspection between pulses inside the Tore Supra tokamak vacuum vessel without breaking temperature and vacuum conditions. The eight meters length robot is composed of a shuttle and six articulated segments with a video camera at its end. A demonstration prototype has been achieved in 2008 at Tore Supra (Gargiulo, 2007; Houry, 2008; Perrot, 2003). A project to upgrade the AIA into a fully operational robot has been undertaken by IRFM and ASIPP in an Associated Laboratory. It will be in operation first in the EAST machine and afterwards in Tore Supra in its WEST (W/Tungsten Environment in Steady-state Tokamak) configuration where it is of paramount importance to survey possible degradation of W component surface. The control system of the robot has been extensively upgraded. The effort has been focused on three areas: (1) improvement of the arm position accuracy, (2) increase of the operational robustness, (3) use of a powerful graphical user interface including simulation of trajectories and robot deployment capabilities in a 3D viewer environment. The aim of this paper is to detail the architecture of the AIA control system.

  20. Articulating addiction in alcohol and other drug policy: A multiverse of habits.

    Science.gov (United States)

    Fraser, Suzanne

    2016-05-01

    Concepts of addiction differ across time and place. This article is based on an international research project currently exploring this variation and change in concepts of addiction, in particular in the field of alcohol and other drug (AOD) use. Taking AOD policy in Australia and Canada as its empirical focus, and in-depth interviews with policy makers, service providers and advocates in each country as its key method (N=60), the article compares the addiction concepts articulated by professionals working in each setting. Drawing on Bruno Latour's theoretical work on the body and his proposal for a better science based on the 'articulation of differences', it explores the accounts of addiction offered across the Australian and Canadian project sites, identifying a shared dynamic in all: the juggling of difference and unity in discussions of the nature of addiction, its composite parts and how best to respond to it. The article maps two simultaneous trajectories in the data - one moving towards difference in participants' insistence on the multitude and diversity of factors that make up addiction problems and solutions, and the other towards unity in their tendency to return to narrow disease models of addiction in uncomfortable, sometimes dissonant, strategic choices. As I will argue, the AOD professionals interviewed for my project operate in two modes treated as distinct in Latour's proposal: in turning to reifying disease labels of addiction they take for granted, and work within, a 'universe of essences', but in articulating the multiplicity and diversity of addiction, they grope towards a vision of a 'multiverse of habits'. The article concludes by addressing this tension directly, scrutinising its practical implications for the development of policy and delivery of services in the future, asking how new thinking, and therefore new opportunities, might be allowed to emerge. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  1. Technical feasibility of personalized articulating knee joint distraction for treatment of tibiofemoral osteoarthritis.

    Science.gov (United States)

    Struik, T; Jaspers, J E N; Besselink, N J; van Roermund, P M; Plomp, S; Rudert, M J; Lafeber, F P J G; Mastbergen, S C

    2017-11-01

    Knee osteoarthritis is a highly prevalent degenerative joint disorder characterized by joint tissue damage and pain. Knee joint distraction has been introduced as a joint preserving surgical procedure to postpone knee arthroplasty. An often used standard externally fixation device for distraction poses a burden to patients due to the absence of joint flexion during the 6weeks treatment. Therefore, a personalized articulating distraction device was developed. The aim of this study was to test technical feasibility of this device. Based on an often applied rigid device, using equal bone pin positions and connectors, a hinge mechanism was developed consisting of a cam-following system for reproducing the complex joint-specific knee kinematics. In support, a device was developed for capturing the joint-specific sagittal plane articulation. The obtained kinematic data were translated into joint-specific cam shapes that were installed bilaterally in the hinge mechanism of the distraction device, as such providing personalized knee motion. Distraction of 5mm was performed within a range of motion of 30deg. joint flexion. Pre-clinical evaluation of the working principle was performed on human cadaveric legs and system stiffness characteristics were biomechanically evaluated. The desired range of motion was obtained and distraction was maintained under physiologically representative loading. Moreover, the joint-specific approach demonstrated tolerance of deviations from anatomical and alignment origin during initial placement of the developed distraction device. Articulation during knee distraction is considered technically feasible and has potential to decrease burden and improve acceptance of distraction therapy. Testing of clinical feasibility is warranted. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Human speech articulator measurements using low power, 2GHz Homodyne sensors

    International Nuclear Information System (INIS)

    Barnes, T; Burnett, G C; Holzrichter, J F

    1999-01-01

    Very low power, short-range microwave ''radar-like'' sensors can measure the motions and vibrations of internal human speech articulators as speech is produced. In these animate (and also in inanimate acoustic systems) microwave sensors can measure vibration information associated with excitation sources and other interfaces. These data, together with the corresponding acoustic data, enable the calculation of system transfer functions. This information appears to be useful for a surprisingly wide range of applications such as speech coding and recognition, speaker or object identification, speech and musical instrument synthesis, noise cancellation, and other applications

  3. Space Photovoltaic Concentrator Using Robust Fresnel Lenses, 4-Junction Cells, Graphene Radiators, and Articulating Receivers

    Science.gov (United States)

    O'Neill, Mark; McDanal, A. J.; Brandhorst, Henry; Spence, Brian; Iqbal, Shawn; Sharps, Paul; McPheeters, Clay; Steinfeldt, Jeff; Piszczor, Michael; Myers, Matt

    2016-01-01

    At the 42nd PVSC, our team presented recent advances in our space photovoltaic concentrator technology. These advances include more robust Fresnel lenses for optical concentration, more thermally conductive graphene radiators for waste heat rejection, improved color-mixing lens technology to minimize chromatic aberration losses with 4-junction solar cells, and an articulating photovoltaic receiver enabling single-axis sun-tracking, while maintaining a sharp focal line despite large beta angles of incidence. In the past year, under a NASA Phase II SBIR program, our team has made much additional progress in the development of this new space photovoltaic concentrator technology, as described in this paper.

  4. Young children's family history of stuttering and their articulation, language and attentional abilities: An exploratory study.

    Science.gov (United States)

    Choi, Dahye; Conture, Edward G; Tumanova, Victoria; Clark, Chagit E; Walden, Tedra A; Jones, Robin M

    The purpose of this study was to determine whether young children who do (CWS) and do not stutter (CWNS) with a positive versus negative family history of stuttering differ in articulation, language and attentional abilities and family histories of articulation, language and attention related disorders. Participants were 25 young CWS and 50 young CWNS. All 75 participants' caregivers consistently reported a positive or negative family history of stuttering across three consecutive time points that were about 8 months apart for a total of approximately 16 months. Each participant's family history focused on the same, relatively limited number of generations (i.e., participants' parents & siblings). Children's family history of stuttering as well as articulation, language, and attention related disorders was obtained from one or two caregivers during an extensive interview. Children's speech and language abilities were measured using four standardized articulation and language tests and their attentional abilities were measured using caregiver reports of temperament. Findings indicated that (1) most caregivers (81.5% or 75 out 92) were consistent in their reporting of positive or negative history of stuttering; (2) CWNS with a positive family history of stuttering, compared to those with a negative family history of stuttering, were more likely to have reported a positive family history of attention deficit/hyperactivity disorder (ADHD), and (3) CWNS with a positive family history of stuttering had lower language scores than those with a negative family history of stuttering. However, there were no such significant differences in family histories of ADHD and language scores for CWS with a positive versus negative family history of stuttering. In addition, although 24% of CWS versus 12% of CWNS's caregivers reported a positive family history of stuttering, inferential analyses indicated no significant differences between CWS and CWNS in relative proportions of family

  5. Human speech articulator measurements using low power, 2GHz Homodyne sensors

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, T; Burnett, G C; Holzrichter, J F

    1999-06-29

    Very low power, short-range microwave ''radar-like'' sensors can measure the motions and vibrations of internal human speech articulators as speech is produced. In these animate (and also in inanimate acoustic systems) microwave sensors can measure vibration information associated with excitation sources and other interfaces. These data, together with the corresponding acoustic data, enable the calculation of system transfer functions. This information appears to be useful for a surprisingly wide range of applications such as speech coding and recognition, speaker or object identification, speech and musical instrument synthesis, noise cancellation, and other applications.

  6. The articulations of the neurocranium in the postnatal skeleton of the domestic fowl (Gallus gallus domesticus).

    Science.gov (United States)

    Hogg, D A

    1978-09-01

    In the neurocranium of the domestic fowl the centres of ossification present at hatching and appearing susbequently have been investigated and illustrated. The controversy over centres around the orbit is reviewed and it is concluded that paired laterally placed pleurosphenoids are present by the time of hatching, while paired orbitosphenoids situated near the midline and dorsal to the optic foramen do not appear until between 70 and 91 days after hatching. No additional "presphenoid" centres were detected. The neurocranial articulations were studied: 27, many of them paired, were identified. The sequence and timing of synostosis were determined.

  7. The physics of articulated toys—a jumping and rotating kangaroo

    International Nuclear Information System (INIS)

    Güémez, J; Fiolhais, M

    2014-01-01

    We describe the physics of an articulated toy with an internal source of energy provided by a spiral spring. The toy is a funny low cost kangaroo which jumps and rotates. The study consists of mechanical and thermodynamical analyses that make use of the Newton and centre of mass equations, the rotational equations and the first law of thermodynamics. This amazing toy provides a nice demonstrative example of how new physics insights can be brought about when links with thermodynamics are established in the study of mechanical systems. (papers)

  8. Effect of emotion and articulation of speech on the Uncanny Valley in virtual characters

    DEFF Research Database (Denmark)

    Tinwell, Angela; Grimshaw, Mark Nicholas; Abdel Nabi, Debbie

    2011-01-01

    This paper presents a study of how exaggerated facial expression in the lower face region affects perception of emotion and the Uncanny Valley phenomenon in realistic, human-like, virtual characters. Characters communicated the six basic emotions, anger, disgust, fear, sadness and surprise...... with normal and exaggerated mouth movements. Measures were taken for perceived familiarity and human-likness. the results showed that: an increased intensity of articulation significantly reduced the uncanny for anger, yet increased perception of the uncanny for characters expressing happiness...

  9. Automatic path-planning for a multilink articulated boom within the torus of a fusion reactor

    International Nuclear Information System (INIS)

    Smidt, D.

    1986-08-01

    For in-torus maintenance of fusion machines a manipulator is conveyed to the working area by a multilink-transporter, also called 'articulated boom'. Systems of this type have in general four to five links and move in the midplane of the torus. They are kinematically redundant and have a very restricted working space. In this paper automatic methods for the collision free approach of any position of the final joint within the reach of the transporter are presented, including insertion and removal. By automatic teach-in with the CAD-simulation a table of safe configurations can be generated and supplemented by a fine-positioning algorithm. (orig.) [de

  10. Fuzzy Control of Yaw and Roll Angles of a Simulated Helicopter Model Includes Articulated Manipulators

    Directory of Open Access Journals (Sweden)

    Hossein Sadegh Lafmejani

    2015-09-01

    Full Text Available Fuzzy logic controller (FLC is a heuristic method by If-Then Rules which resembles human intelligence and it is a good method for designing Non-linear control systems. In this paper, an arbitrary helicopter model includes articulated manipulators has been simulated with Matlab SimMechanics toolbox. Due to the difficulties of modeling this complex system, a fuzzy controller with simple fuzzy rules has been designed for its yaw and roll angles in order to stabilize the helicopter while it is in the presence of disturbances or its manipulators are moving for a task. Results reveal that a simple FLC can appropriately control this system.

  11. Modeling, Simulation and Position Control of 3 Degree of Freedom Articulated Manipulator

    Directory of Open Access Journals (Sweden)

    Hossein Sadegh Lafmejani

    2013-09-01

    Full Text Available In this paper, the modeling, simulation and control of 3 degree of freedom articulated robotic manipulator have been studied. First, we extracted kinematics and dynamics equations of the mentioned manipulator by using the Lagrange method. In order to validate the analytical model of the manipulator we compared the model simulated in the simulation environment of Matlab with the model was simulated with the SimMechanics toolbox. A sample path has been designed for analyzing the tracking subject. The system has been linearized with feedback linearization and then a PID controller was applied to track a reference trajectory. Finally, the control results have been compared with a nonlinear PID controller.

  12. The job that no one wants to do? Museum educators’ articulations about guided tours

    Directory of Open Access Journals (Sweden)

    Cecilia Rodehn

    2017-03-01

    Full Text Available The aim of this paper is to investigate museum educators’ articulations of their performance during guided tours. The paper investigates preparations for a guided tour, considerations related to doing guided tours and the events after the guided tour. The text focus especially on preparation and the aftermath as this is not normally discussed in research on museum education. The paper is based on participant observation of guided tours, filming of guided tours and qualitative semi-structured interviews. The material is analysed using performance theories and theories on materiality. The paper seeks to unearth knowledge imbued in the museum educators’ performance and reveal what can be known from guiding bodies.

  13. Articulation of young adult readers in a digitalized and medialized landscape of texts

    DEFF Research Database (Denmark)

    Henkel, Ayoe Qvist

    The digital turn does not bring about changes in young adultliterature considered as aesthetic artifacts and literary works but it changes the perception and reception of the reader. Digital young adult literature is increasingly multimodal, including interactivity and the integration of elements...... of game aesthetics. The way the young person is articulated within such texts must be presumed to be new, and the pivotal point of this paper will be to explore how the young adult reader is thematized in content, form, and medium in digital young adult literature....

  14. IMF, BIS, and World Bank: On the Intra-institutional Articulation of the International Financial System

    Directory of Open Access Journals (Sweden)

    Maria de Fatima Silva do Carmo Previdelli

    2018-01-01

    Full Text Available The international financial system could be organized into three groups. According to this classification, the first group includes the organizations that exercise the functions of regulation and supervision. In the second, we have those that are regulated and supervised by the former, and in the third, we find the organizations that do not follow such rules or supervision, forming the so-called shadow banking system. This article seeks to examine the first group, and, more specifically, how the International Monetary Fund articulates with the primary elements of such a group.

  15. A 6-DOF vibration isolation system for hydraulic hybrid vehicles

    Science.gov (United States)

    Nguyen, The; Elahinia, Mohammad; Olson, Walter W.; Fontaine, Paul

    2006-03-01

    This paper presents the results of vibration isolation analysis for the pump/motor component of hydraulic hybrid vehicles (HHVs). The HHVs are designed to combine gasoline/diesel engine and hydraulic power in order to improve the fuel efficiency and reduce the pollution. Electric hybrid technology is being applied to passenger cars with small and medium engines to improve the fuel economy. However, for heavy duty vehicles such as large SUVs, trucks, and buses, which require more power, the hydraulic hybridization is a more efficient choice. In function, the hydraulic hybrid subsystem improves the fuel efficiency of the vehicle by recovering some of the energy that is otherwise wasted in friction brakes. Since the operation of the main component of HHVs involves with rotating parts and moving fluid, noise and vibration are an issue that affects both passengers (ride comfort) as well as surrounding people (drive-by noise). This study looks into the possibility of reducing the transmitted noise and vibration from the hydraulic subsystem to the vehicle's chassis by using magnetorheological (MR) fluid mounts. To this end, the hydraulic subsystem is modeled as a six degree of freedom (6-DOF) rigid body. A 6-DOF isolation system, consisting of five mounts connected to the pump/motor at five different locations, is modeled and simulated. The mounts are designed by combining regular elastomer components with MR fluids. In the simulation, the real loading and working conditions of the hydraulic subsystem are considered and the effects of both shock and vibration are analyzed. The transmissibility of the isolation system is monitored in a wide range of frequencies. The geometry of the isolation system is considered in order to sustain the weight of the hydraulic system without affecting the design of the chassis and the effectiveness of the vibration isolating ability. The simulation results shows reduction in the transmitted vibration force for different working cycles of

  16. Corporate Hybrid Bonds

    OpenAIRE

    Ahlberg, Johan; Jansson, Anton

    2016-01-01

    Hybrid securities do not constitute a new phenomenon in the Swedish capital markets. Most commonly, hybrids issued by Swedish real estate companies in recent years are preference shares. Corporate hybrid bonds on the other hand may be considered as somewhat of a new-born child in the family of hybrid instruments. These do, as all other hybrid securities, share some equity-like and some debt-like characteristics. Nevertheless, since 2013 the interest for the instrument has grown rapidly and ha...

  17. Hybrid XRF

    International Nuclear Information System (INIS)

    Heckel, J.

    2002-01-01

    Full text: In the last 10 years significant innovations of EDXRF, e.g. total reflection XRF or polarized beam XRF, were utilized in different industrial applications. The decrease of background within the spectra was the goal of these developments. Excellent detection limits and sensitivities demonstrate the success of these new techniques. Nevertheless, further improvements are possible by using Si drift detectors. These detectors allow the processing of input count rates up to 10 6 cps in comparison to 10 5 of Si(Li) detectors. New excitation optics are necessary to produce such count rates. One possibility is the use of doubly curved crystals between tube and sample. These crystals enable the reflection of the primary beam within the given solid angle (0.4π) of an end window tube to the sample. Using such brightness optics excellent sensitivities mainly for light elements are achievable. The combination of a BRAGG crystal as a wavelength dispersive component and a solid state detector as an energy dispersive component creates a new technique: hybrid XRF. Copyright (2002) Australian X-ray Analytical Association Inc. Copyright (2002) Australian X-ray Analytical Association Inc

  18. Hybrid mimics and hybrid vigor in Arabidopsis

    Science.gov (United States)

    Wang, Li; Greaves, Ian K.; Groszmann, Michael; Wu, Li Min; Dennis, Elizabeth S.; Peacock, W. James

    2015-01-01

    F1 hybrids can outperform their parents in yield and vegetative biomass, features of hybrid vigor that form the basis of the hybrid seed industry. The yield advantage of the F1 is lost in the F2 and subsequent generations. In Arabidopsis, from F2 plants that have a F1-like phenotype, we have by recurrent selection produced pure breeding F5/F6 lines, hybrid mimics, in which the characteristics of the F1 hybrid are stabilized. These hybrid mimic lines, like the F1 hybrid, have larger leaves than the parent plant, and the leaves have increased photosynthetic cell numbers, and in some lines, increased size of cells, suggesting an increased supply of photosynthate. A comparison of the differentially expressed genes in the F1 hybrid with those of eight hybrid mimic lines identified metabolic pathways altered in both; these pathways include down-regulation of defense response pathways and altered abiotic response pathways. F6 hybrid mimic lines are mostly homozygous at each locus in the genome and yet retain the large F1-like phenotype. Many alleles in the F6 plants, when they are homozygous, have expression levels different to the level in the parent. We consider this altered expression to be a consequence of transregulation of genes from one parent by genes from the other parent. Transregulation could also arise from epigenetic modifications in the F1. The pure breeding hybrid mimics have been valuable in probing the mechanisms of hybrid vigor and may also prove to be useful hybrid vigor equivalents in agriculture. PMID:26283378

  19. Рassenger survey on public transport in Zhitomir and evaluation of the main technical and operational parameters for the choice of city buses

    Directory of Open Access Journals (Sweden)

    Rudzynskyi V.V.

    2016-08-01

    Full Text Available The parameters of the passenger movements in the direction of public transport in Zhitomir are defined and conformity assessment of technical and operational parameters of urban shuttle buses is folded. Firstly, the amount of passenger traffic affects the optimal choice of passenger vehicles and secondly, the intensity of road traffic on the streets of areas where passengers pass routes. It should also be kept in mind that passenger traffic can fluctuate significantly depending on the time of day and days of the week. But virtually all carriers can be replaced within days with rolling at a large passenger capacity, and vice versa. Therefore, the choice of one type of rolling stock, the capacity of which is set taking into account the data on hourly passenger capacity on the most loaded part of the route up to an hour "peak", or its capacity per day on the route as a whole. Thus the research work on inspection of passenger-route passenger transport, and public electric transport in Zhitomir is conducted. Primary data was estimated to select the main criteria for urban passenger bus. It was found that the buses in the "peak" hours move on passenger congestion. Preliminary conclusions and recommendations on the criteria of optimal rolling of choice for the city bus route network are provided.

  20. Morphometric Differences of Vocal Tract Articulators in Different Loudness Conditions in Singing.

    Directory of Open Access Journals (Sweden)

    Matthias Echternach

    Full Text Available Dynamic MRI analysis of phonation has gathered interest in voice and speech physiology. However, there are limited data addressing the extent to which articulation is dependent on loudness.12 professional singer subjects of different voice classifications were analysed concerning the vocal tract profiles recorded with dynamic real-time MRI with 25fps in different pitch and loudness conditions. The subjects were asked to sing ascending scales on the vowel /a/ in three loudness conditions (comfortable=mf, very soft=pp, very loud=ff, respectively. Furthermore, fundamental frequency and sound pressure level were analysed from the simultaneously recorded optical audio signal after noise cancellation.The data show articulatory differences with respect to changes of both pitch and loudness. Here, lip opening and pharynx width were increased. While the vertical larynx position was rising with pitch it was lower for greater loudness. Especially, the lip opening and pharynx width were more strongly correlated with the sound pressure level than with pitch.For the vowel /a/ loudness has an effect on articulation during singing which should be considered when articulatory vocal tract data are interpreted.

  1. La partera profesional: articulating identity and cultural space for a new kind of midwife in Mexico.

    Science.gov (United States)

    Davis-Floyd, R

    2001-01-01

    This article documents the emergence of a new kind of midwife in Mexico, the thoroughly postmodern partera profesional. It traces the transnational conjunctures that facilitated her creation, illustrates aspects of her philosophy and praxis, and probes her ongoing articulations of identity. These women, who are of diverse sociocultural backgrounds, initially sought training from American direct-entry midwives in the independent out-of-hospital midwifery model; now, they are adapting that model to the situation in Mexico. Through their own practices, through intensive liaison work with traditional midwives, and through organizing national midwifery conferences and meetings, they are creating midwifery as both incipient profession and nascent social movement. Some of them operate outside the medical system while others are carving a niche within it. The mere existence of these self-consciously activist midwives constitutes a critique of monological Mexican medicine and its high cesarean rates; however, these women face a long struggle to define their identities, legalize their practices, and generate a sustainable space within the emergent Mexican technocracy. To their intense dismay, this struggle must take place within the context of the escalating disappearance of the traditional midwives whom they seek to support. The tension they feel between their desire to preserve traditional midwifery and their desire to create professional midwifery is a recurrent theme. These goals alternately complement and conflict with one another, yet both are central to the partera profesional's ongoing efforts at identity articulation.

  2. Articulated inspection arm for ITER, a demonstration in the Tore Supra tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Cordier, J.J.; Gargiulo, L.; Grisolia, C.; Samaille, F. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Friconneau, J.P.; Perrot, Y. [CEA Fontenay-aux-Roses, LIST Robotics and Interactive Systems Unit, 92 (France); Palmer, J.D. [Max-Planck-Institut fuer Plasmaphysik Boltzmannstr.2, Garching (Germany)

    2003-07-01

    The aim of this program is to demonstrate for ITER the feasibility of an in-vessel remote handling inspection using a long reach, limited payload carrier (1 to 10 kg) for penetration of the ITER chamber through the openings. This device is dedicated to close inspection of the Plasma Facing Components (PFC). An articulated demonstrator called articulated inspection arm (AIA) has been manufactured. A feasibility study of a full AIA operation in Tore Supra was performed, taking into account ITER reference requirements. A scale one demonstration of the AIA under ITER relevant condition is feasible on Tore Supra and would give significant improvement in research results for ITER remote Handling equipment. The test of the AIA demonstrator behaviour is foreseen in 2005 in real Tokamak conditions. The paper presents the full robot concept, the results of the first test campaign, the AIA new design and its integration on Tore Supra. Several potential uses of the AIA for the in vessel components inspection are being studied such as PFC visual inspection, water loop leak testing, laser ablation for wall detritiation and carbon dust and flakes removal are foreseen as utilities to be placed at the AIA head. These various systems are described in the paper.

  3. Articulated inspection arm for ITER, a demonstration in the Tore Supra tokamak

    International Nuclear Information System (INIS)

    Cordier, J.J.; Gargiulo, L.; Grisolia, C.; Samaille, F.; Palmer, J.D.

    2003-01-01

    The aim of this program is to demonstrate for ITER the feasibility of an in-vessel remote handling inspection using a long reach, limited payload carrier (1 to 10 kg) for penetration of the ITER chamber through the openings. This device is dedicated to close inspection of the Plasma Facing Components (PFC). An articulated demonstrator called articulated inspection arm (AIA) has been manufactured. A feasibility study of a full AIA operation in Tore Supra was performed, taking into account ITER reference requirements. A scale one demonstration of the AIA under ITER relevant condition is feasible on Tore Supra and would give significant improvement in research results for ITER remote Handling equipment. The test of the AIA demonstrator behaviour is foreseen in 2005 in real Tokamak conditions. The paper presents the full robot concept, the results of the first test campaign, the AIA new design and its integration on Tore Supra. Several potential uses of the AIA for the in vessel components inspection are being studied such as PFC visual inspection, water loop leak testing, laser ablation for wall detritiation and carbon dust and flakes removal are foreseen as utilities to be placed at the AIA head. These various systems are described in the paper

  4. Robust MR spine detection using hierarchical learning and local articulated model.

    Science.gov (United States)

    Zhan, Yiqiang; Maneesh, Dewan; Harder, Martin; Zhou, Xiang Sean

    2012-01-01

    A clinically acceptable auto-spine detection system, i.e., localization and labeling of vertebrae and inter-vertebral discs, is required to have high robustness, in particular to severe diseases (e.g., scoliosis) and imaging artifacts (e.g. metal artifacts in MR). Our method aims to achieve this goal with two novel components. First, instead of treating vertebrae/discs as either repetitive components or completely independent entities, we emulate a radiologist and use a hierarchial strategy to learn detectors dedicated to anchor (distinctive) vertebrae, bundle (non-distinctive) vertebrae and inter-vertebral discs, respectively. At run-time, anchor vertebrae are detected concurrently to provide redundant and distributed appearance cues robust to local imaging artifacts. Bundle vertebrae detectors provide candidates of vertebrae with subtle appearance differences, whose labels are mutually determined by anchor vertebrae to gain additional robustness. Disc locations are derived from a cloud of responses from disc detectors, which is robust to sporadic voxel-level errors. Second, owing to the non-rigidness of spine anatomies, we employ a local articulated model to effectively model the spatial relations across vertebrae and discs. The local articulated model fuses appearance cues from different detectors in a way that is robust to abnormal spine geometry resulting from severe diseases. Our method is validated by 300 MR spine scout scans and exhibits robust performance, especially to cases with severe diseases and imaging artifacts.

  5. The NET articulated boom: Preliminary investigations and justification for a full scale prototype

    International Nuclear Information System (INIS)

    Suppan, A.

    1990-12-01

    The articulated boom system is the favourite in-vessel handling system for NET which will be used to maintain or replace in-vessel components during short term interventions. The testbed EDITH is the prototype of this system and is the logical step between the proof of principle of the system, which is already performed by the JET articulated boom, and the operational equipment for NET. EDITH is required to demonstrate that maintenance of plasma facing components can be carried out with the anticipated reliability and time. To achieve this aim EDITH is based on the experience of the JET boom and will be constructed in full scale, supplemented by a full scale mock-up. A further goal of EDITH is to allow the testing of boom components and subassemblies. The results of preliminary investigations for the boom are summarized, the need of the testbed EDITH and a full scale mock-up is discussed and both EDITH and the mock-up are described. (orig.) [de

  6. Morphometric Differences of Vocal Tract Articulators in Different Loudness Conditions in Singing.

    Science.gov (United States)

    Echternach, Matthias; Burk, Fabian; Burdumy, Michael; Traser, Louisa; Richter, Bernhard

    2016-01-01

    Dynamic MRI analysis of phonation has gathered interest in voice and speech physiology. However, there are limited data addressing the extent to which articulation is dependent on loudness. 12 professional singer subjects of different voice classifications were analysed concerning the vocal tract profiles recorded with dynamic real-time MRI with 25fps in different pitch and loudness conditions. The subjects were asked to sing ascending scales on the vowel /a/ in three loudness conditions (comfortable=mf, very soft=pp, very loud=ff, respectively). Furthermore, fundamental frequency and sound pressure level were analysed from the simultaneously recorded optical audio signal after noise cancellation. The data show articulatory differences with respect to changes of both pitch and loudness. Here, lip opening and pharynx width were increased. While the vertical larynx position was rising with pitch it was lower for greater loudness. Especially, the lip opening and pharynx width were more strongly correlated with the sound pressure level than with pitch. For the vowel /a/ loudness has an effect on articulation during singing which should be considered when articulatory vocal tract data are interpreted.

  7. OCCLUSION AND ARTICULATION IN BRUXISM AND BRUXOMANIA INVESTIGATED WITH THE SYSTEM T-SCAN III.

    Directory of Open Access Journals (Sweden)

    Mariana Dimova

    2014-11-01

    Full Text Available Aim: To be analyzed common features of occlusal relationships in patients with bruxism and bruxomania at maximum intercuspation (MIP and eccentric jaw movements. Materials and Methods: 30 patients (22 women and 8 men, mean aged of 42,8 ± 13,3 with bruxism and/or bruxomania are examined with the system T-Scan III. Sequence of records is - at maximum intercuspation (MIP; in manual leading to central relation and in eccentric jaw movements. In the same sequence is investigated control group - 30 people (15 women and 15 men aged between 21 and 45 who didn’t have bruxism and/or bruxomania and dentition is preserved. Results: In the control group 85% of cases there is a balance of forces in both halves of the dental arch. In patients with bruxism is established uneven distribution of forces in MIP and articulation blockages (95%. There are three major reasons that impede spontaneous bilateral closing - force outliers (93% of cases; low force outliers (82% and presence of interceptive contacts and sliding occurring in the beginning of occlusion time until MIP (in all patients. Conclusions: In order to achieve a balanced occlusion in patients with bruxism and/or bruxomania required are correct diagnosis, registration and removal of preliminary contacts, articulation blockages and infraocclusion. Occlusal analysis is objective and an indicator of subsequent treatment only when it is a combination of clinical, instrumental and computerized occlusal analysis.

  8. How clarinettists articulate: The effect of blowing pressure and tonguing on initial and final transients.

    Science.gov (United States)

    Li, Weicong; Almeida, André; Smith, John; Wolfe, Joe

    2016-02-01

    Articulation, including initial and final note transients, is important to tasteful music performance. Clarinettists' tongue-reed contact, the time variation of the blowing pressure P¯mouth, the mouthpiece pressure, the pressure in the instrument bore, and the radiated sound were measured for normal articulation, accents, sforzando, staccato, and for minimal attack, i.e., notes started very softly. All attacks include a phase when the amplitude of the fundamental increases exponentially, with rates r ∼1000 dB s(-1) controlled by varying both the rate of increase in P¯mouth and the timing of tongue release during this increase. Accented and sforzando notes have shorter attacks (r∼1300 dB s(-1)) than normal notes. P¯mouth reaches a higher peak value for accented and sforzando notes, followed by a steady decrease for accented notes or a rapid fall to a lower, nearly steady value for sforzando notes. Staccato notes are usually terminated by tongue contact, producing an exponential decrease in sound pressure with rates similar to those calculated from the bandwidths of the bore resonances: ∼400 dB s(-1). In all other cases, notes are stopped by decreasing P¯mouth. Notes played with different dynamics are qualitatively similar, but louder notes have larger P¯mouth and larger r.

  9. Antibiotic-impregnated articulating cement spacer for infected total knee arthroplasty

    Directory of Open Access Journals (Sweden)

    Parag Garg

    2011-01-01

    Full Text Available Background : Standard treatment of chronic infected total knee arthroplasty (TKA is a two-stage revision, the first step being placement of an antibiotic-impregnated cement spacer. Here we describe the results of a new technique (modification of the Goldstien′s technique for intraoperative manufacture of a customized articulating spacer at minimal cost and with relatively good conformity and longevity. Materials and Methods : Thirty-six infected knees underwent this procedure from June 2002 to May 2007. The technique consists of using the freshened femur and tibia interface as molds wrapped in a tin foil for manufacturing the two components of the spacer with antibiotic-impregnated methyl methycrylate cement. We used the spacer and the femoral component of the trial set of a TKA system to mold them to perfect articulation. We also reinforced the spacer with a K-wire scaffold to prevent fracture of the cement mantle in the last 21 cases. Results : All 36 knees showed excellent results in terms of infection control, mobility, and stability. There was significant improvement in the WOMAC and Knee Society Scores (20 and 39 points respectively. There were two fractures of the spacers in the initial 15 cases that did not have K-wire scaffolding but none in the last 21 that had reinforcement. Conclusion : This technique provides a more conforming spacer, with good range of motion and stability. The reinforcement helps in preventing the fracture of the cement mantle and is cost effective.

  10. The articulation of neoliberalism: narratives of experience of chronic illness management in Bulgaria and the UK.

    Science.gov (United States)

    Vassilev, Ivaylo; Rogers, Anne; Todorova, Elka; Kennedy, Anne; Roukova, Poli

    2017-03-01

    The shift from social democratic to a neoliberal consensus in modern welfare capitalist states is characterised by an emphasis on individual responsibility, consumer choice, market rationality and growing social inequalities. There has been little exploration of how neoliberalism has shaped the environment within which chronic illness is experienced and managed. This article explores the different articulations of neoliberalism manifest in the arena of personal illness management in Bulgaria and the UK. People with type 2 diabetes discussed their experiences in terms of struggling with diet, diabetes as a personal failure, integrating illness management and valued activities, and the trustworthiness of the healthcare system. The UK narratives were framed within an individual responsibility discourse while in Bulgaria lack of resources dominated discussions, which were framed as structurally generated and unrelated to individual capabilities and choices. Respondents faced personal management challenges related to consumer and healthcare market failures in both countries. Differences in market regulation and emerging stakeholder and interest coalitions influenced users' expectations and their navigation and adaption to market failures in managing their everyday illnesses. The UK and Bulgarian articulations of neoliberalism can be described differently: the first as a logic of managed choice and the second as a logic of unmanaged consumerism. © 2016 Foundation for the Sociology of Health & Illness.

  11. Detecting self-produced speech errors before and after articulation: An ERP investigation

    Directory of Open Access Journals (Sweden)

    Kevin Michael Trewartha

    2013-11-01

    Full Text Available It has been argued that speech production errors are monitored by the same neural system involved in monitoring other types of action errors. Behavioral evidence has shown that speech errors can be detected and corrected prior to articulation, yet the neural basis for such pre-articulatory speech error monitoring is poorly understood. The current study investigated speech error monitoring using a phoneme-substitution task known to elicit speech errors. Stimulus-locked event-related potential (ERP analyses comparing correct and incorrect utterances were used to assess pre-articulatory error monitoring and response-locked ERP analyses were used to assess post-articulatory monitoring. Our novel finding in the stimulus-locked analysis revealed that words that ultimately led to a speech error were associated with a larger P2 component at midline sites (FCz, Cz, and CPz. This early positivity may reflect the detection of an error in speech formulation, or a predictive mechanism to signal the potential for an upcoming speech error. The data also revealed that general conflict monitoring mechanisms are involved during this task as both correct and incorrect responses elicited an anterior N2 component typically associated with conflict monitoring. The response-locked analyses corroborated previous observations that self-produced speech errors led to a fronto-central ERN. These results demonstrate that speech errors can be detected prior to articulation, and that speech error monitoring relies on a central error monitoring mechanism.

  12. Alternative Energy Busing

    Science.gov (United States)

    LaFee, Scott

    2012-01-01

    In recent years, school districts have converted portions of their bus fleets to cleaner-burning, sometimes cheaper, alternative fossil fuels, such as compressed natural gas or propane. Others have adopted biodiesel, which combines regular diesel with fuel derived from organic sources, usually vegetable oils or animal fats. The number of biodiesel…

  13. Buses at the crossroads

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1990-06-15

    With demanding new physics data handling requirements on the horizon, the VMEbus Working Group of ESONE (the European Standards On Nuclear Electronics committee of European laboratories) organized a fruitful meeting entitled 'New Backplane Bus Architectures' at CERN in March.

  14. Simultaneous Optimization of Topology and Component Sizes for Double Planetary Gear Hybrid Powertrains

    Directory of Open Access Journals (Sweden)

    Weichao Zhuang

    2016-05-01

    Full Text Available Hybrid powertrain technologies are successful in the passenger car market and have been actively developed in recent years. Optimal topology selection, component sizing, and controls are required for competitive hybrid vehicles, as multiple goals must be considered simultaneously: fuel efficiency, emissions, performance, and cost. Most of the previous studies explored these three design dimensions separately. In this paper, two novel frameworks combining these three design dimensions together are presented and compared. One approach is nested optimization which searches through the whole design space exhaustively. The second approach is called enhanced iterative optimization, which executes the topology optimization and component sizing alternately. A case study shows that the later method can converge to the global optimal design generated from the nested optimization, and is much more computationally efficient. In addition, we also address a known issue of optimal designs: their sensitivity to parameters, such as varying vehicle weight, which is a concern especially for the design of hybrid buses. Therefore, the iterative optimization process is applied to design a robust multi-mode hybrid electric bus under different loading scenarios as the final design challenge of this paper.

  15. Does working memory change with age? The interactions of concurrent articulation with the effects of word length and acoustic confusion.

    Science.gov (United States)

    Bireta, Tamra J; Fine, Hope C; Vanwormer, Lisa A

    2013-01-01

    The effects of acoustic confusion (phonological similarity), word length, and concurrent articulation (articulatory suppression) are cited as support for Working Memory's phonological loop component (e.g., Baddeley, 2000 , Psychonomic Bulletin and Review, 7, 544). Research has focused on younger adults, with no studies examining whether concurrent articulation reduces the word length and acoustic confusion effects among older adults. In the current study, younger and older adults were given lists of similar and dissimilar letters (Experiment 1) or long and short words (Experiment 2) for immediate serial reconstruction of order. Items were presented visually or auditorily, with or without concurrent articulation. As expected, younger and older adults demonstrated effects of acoustic confusion, word length, and concurrent articulation. Further, concurrent articulation reduced the effects of acoustic confusion and word length equally for younger and older adults. This suggests that age-related differences occur in overall performance, but do not reflect an age-related deficiency in the functioning of the phonological loop component of working memory.

  16. Assessing the effect of physical differences in the articulation of consonants and vowels on audiovisual temporal perception

    Science.gov (United States)

    Vatakis, Argiro; Maragos, Petros; Rodomagoulakis, Isidoros; Spence, Charles

    2012-01-01

    We investigated how the physical differences associated with the articulation of speech affect the temporal aspects of audiovisual speech perception. Video clips of consonants and vowels uttered by three different speakers were presented. The video clips were analyzed using an auditory-visual signal saliency model in order to compare signal saliency and behavioral data. Participants made temporal order judgments (TOJs) regarding which speech-stream (auditory or visual) had been presented first. The sensitivity of participants' TOJs and the point of subjective simultaneity (PSS) were analyzed as a function of the place, manner of articulation, and voicing for consonants, and the height/backness of the tongue and lip-roundedness for vowels. We expected that in the case of the place of articulation and roundedness, where the visual-speech signal is more salient, temporal perception of speech would be modulated by the visual-speech signal. No such effect was expected for the manner of articulation or height. The results demonstrate that for place and manner of articulation, participants' temporal percept was affected (although not always significantly) by highly-salient speech-signals with the visual-signals requiring smaller visual-leads at the PSS. This was not the case when height was evaluated. These findings suggest that in the case of audiovisual speech perception, a highly salient visual-speech signal may lead to higher probabilities regarding the identity of the auditory-signal that modulate the temporal window of multisensory integration of the speech-stimulus. PMID:23060756

  17. A Circulating-Current Suppression Method for Parallel-Connected Voltage-Source Inverters With Common DC and AC Buses

    DEFF Research Database (Denmark)

    Wei, Baoze; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez

    2017-01-01

    This paper presents a theoretical study with experimental validation of a circulating-current suppression method for parallel operation of three-phase voltage source inverters (VSI), which may be suitable for modular parallel uninterruptible power supply systems or hybrid AC/DC microgrid applicat......This paper presents a theoretical study with experimental validation of a circulating-current suppression method for parallel operation of three-phase voltage source inverters (VSI), which may be suitable for modular parallel uninterruptible power supply systems or hybrid AC/DC microgrid......, and added into the conventional droop plus virtual impedance control. In the control architecture, the reference voltages of the inverters are generated by the primary control loop which consists of a droop control and a virtual impedance. The secondary control is used to compensate the voltage drop...

  18. Gaseous and particulate composition of fresh and aged emissions of diesel, RME and CNG buses using Chemical Ionization Mass Spectrometry

    Science.gov (United States)

    Psichoudaki, Magda; Le Breton, Michael; Hallquist, Mattias; Watne, Ågot; Hallquist, Asa

    2016-04-01

    Urban air pollution is becoming a significant global problem, especially for large cities around the world. Traffic emissions contribute significantly to both elevated particle concentrations and to gaseous pollutants in cities. The latter also have the potential of forming more particulate mass via their photochemical oxidation in the atmosphere. The International Agency for Research on Cancer and the US EPA have characterised diesel exhausts as a likely human carcinogen that can also contribute to other health problems. In order to meet the challenges with increased transportation and enhanced greenhouse gas emissions, the European Union have decided on a 10% substitution of traditional fuels in the road transport sector by alternative fuels (e.g. biodiesel, CNG) before the year 2020. However, it is also important to study the influence of fuel switches on other primary pollutants as well as the potential to form secondary aerosol mass. This work focuses on the characterisation of the chemical composition of the gas and the condensed phase of fresh bus emissions during acceleration, in order to mimic the exhaust plume that humans would inhale under realistic conditions. In addition, photochemical aging of the exhaust emissions was achieved by employing a Potential Aerosol Mass (PAM) flow reactor, allowing the characterization of the composition of the corresponding aged emissions. The PAM reactor uses UV lamps and high concentrations of oxidants (OH radicals and O3) to oxidize the organic species present in the chamber. The oxidation that takes place within the reactor can be equivalent to up to one week of atmospheric oxidation. Preliminary tests showed that the oxidation employed in these measurements corresponded to a range from 4 to 8 days in the atmosphere. During June and July 2015, a total of 29 buses, 5 diesel, 13 CNG and 11 RME (rapeseed methyl ester), were tested in two different locations with limited influence from other types of emissions and traffic

  19. Hybrid Management in Hospitals

    DEFF Research Database (Denmark)

    Byrkjeflot, Haldor; Jespersen, Peter Kragh

    2010-01-01

    Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer......Artiklen indeholder et litteraturbaseret studium af ledelsesformer i sygehuse, hvor sundhedsfaglig ledelse og generel ledelse mikses til hybride ledelsesformer...

  20. Hydraulic Hybrid Vehicles

    Science.gov (United States)

    EPA and the United Parcel Service (UPS) have developed a hydraulic hybrid delivery vehicle to explore and demonstrate the environmental benefits of the hydraulic hybrid for urban pick-up and delivery fleets.

  1. Study on Roll Instability Mechanism and Stability Index of Articulated Steering Vehicles

    Directory of Open Access Journals (Sweden)

    Xuefei Li

    2016-01-01

    Full Text Available This study examines the roll instability mechanism and stability index of articulated steering vehicles (ASVs by taking wheel loaders as the research object. A seven-degree-of-freedom nonlinear dynamics model of the ASVs is built on the basis of multibody dynamics. A physical prototype model of an ASV is designed and manufactured to validate the dynamic model. Test results reasonably agree with the simulation results, which indicates that the established dynamic model can reasonably describe ASV movements. Detailed analysis of the rollover stability of the wheel loader is performed with the use of the established dynamic model. Analysis results show that rollover will occur when the roll angular velocity exceeds a critical threshold, which is affected by lateral acceleration and slope angle. On this basis, a dynamic stability index applicable to the ASVs is presented.

  2. Articulations between self-care and ecosophy: the teachers’ training issue

    Directory of Open Access Journals (Sweden)

    Isabel Gomes Ayres

    2018-02-01

    Full Text Available In this article, we covered Michel Foucault and Félix Guattari papers in order to try to articulate the “self-care” (Foucault and "Ecosophy" (Guattari philosophical concepts and then, to discuss how these concepts can build up a thought on the teachers’ training, as well as, suggesting a training itself which is called “Ecosophic". Between 1981 and 1982, Foucault spoke about the urgency of rebuilding a “self” ethic as a possible confrontation against dissymmetric power relationships. Later, in 1989, Guattari, also referenced this urgency against a multifaceted crisis that deteriorated in the physical environment, social relations and subjectivities of the entire planet. Foucault and Guattari have developed these criticisms for about three decades and we believe their writings may contribute to place the current spotlight.

  3. Applying a Cerebellar Model Articulation Controller Neural Network to a Photovoltaic Power Generation System Fault Diagnosis

    Directory of Open Access Journals (Sweden)

    Kuei-Hsiang Chao

    2013-01-01

    Full Text Available This study employed a cerebellar model articulation controller (CMAC neural network to conduct fault diagnoses on photovoltaic power generation systems. We composed a module array using 9 series and 2 parallel connections of SHARP NT-R5E3E 175 W photovoltaic modules. In addition, we used data that were outputted under various fault conditions as the training samples for the CMAC and used this model to conduct the module array fault diagnosis after completing the training. The results of the training process and simulations indicate that the method proposed in this study requires fewer number of training times compared to other methods. In addition to significantly increasing the accuracy rate of the fault diagnosis, this model features a short training duration because the training process only tunes the weights of the exited memory addresses. Therefore, the fault diagnosis is rapid, and the detection tolerance of the diagnosis system is enhanced.

  4. Design and Development of an Automatic Tool Changer for an Articulated Robot Arm

    International Nuclear Information System (INIS)

    Ambrosio, H; Karamanoglu, M

    2014-01-01

    In the creative industries, the length of time between the ideation stage and the making of physical objects is decreasing due to the use of CAD/CAM systems and adicitive manufacturing. Natural anisotropic materials, such as solid wood can also be transformed using CAD/CAM systems, but only with subtractive processes such as machining with CNC routers. Whilst some 3 axis CNC routing machines are affordable to buy and widely available, more flexible 5 axis routing machines still present themselves as a too big investment for small companies. Small refurbished articulated robots can be a cheaper alternative but they require a light end-effector. This paper presents a new lightweight tool changer that converts a small 3kg payload 6 DOF robot into a robot apprentice able to machine wood and similar soft materials

  5. Design and Development of an Automatic Tool Changer for an Articulated Robot Arm

    Science.gov (United States)

    Ambrosio, H.; Karamanoglu, M.

    2014-07-01

    In the creative industries, the length of time between the ideation stage and the making of physical objects is decreasing due to the use of CAD/CAM systems and adicitive manufacturing. Natural anisotropic materials, such as solid wood can also be transformed using CAD/CAM systems, but only with subtractive processes such as machining with CNC routers. Whilst some 3 axis CNC routing machines are affordable to buy and widely available, more flexible 5 axis routing machines still present themselves as a too big investment for small companies. Small refurbished articulated robots can be a cheaper alternative but they require a light end-effector. This paper presents a new lightweight tool changer that converts a small 3kg payload 6 DOF robot into a robot apprentice able to machine wood and similar soft materials.

  6. Early results of metal on metal articulation total hip arthroplasty in young patients.

    Science.gov (United States)

    Mohamad, J A; Kwan, M K; Merican, A M; Abbas, A A; Kamari, Z H; Hisa, M K; Ismail, Z; Idrus, R M

    2004-12-01

    We report our early experience of 20 cases of metal on metal articulation total hip arthroplasty in 19 young patients. Avascular necrosis of the femoral head (63%) was the commonest diagnosis for patients undergoing this procedure, followed by osteoarthritis (21%). In general, most of the patients were young and physically active with an average age of 43.1 years (range, 25 to 58 years). The average follow-up period was 18 months (range, 7 to 46 months). The mean total Harris Hip Score preoperatively and at final follow-up was 31 points and 89 points respectively. The mean total Pain Score improved from an average of 11.5 to 41.1 points at final follow-up. Sixteen (84%) of the patients had a good to excellent hip score. There was one dislocation, which stabilized after reduction and conservative management. One case of early infection underwent a two-staged revision.

  7. Influence of tire inflating pressure at dynamic forces acting on articulated trolleybus

    Directory of Open Access Journals (Sweden)

    Polach Pavel

    2017-01-01

    Full Text Available ŠKODA VÝZKUM s.r.o. cooperated on the development of the NEOPLAN DMA low-floor articulated trolleybus intended for the Boston city. Multibody models and finite element models of the trolleybus were utilized in the stage of the vehicle design. At the end of the stage of computer modelling and testing of the trolleybus prototype a decision to reduce tire inflating of vehicles in serial production (together with the change the type of shock absorbers used in trolleybus suspension was made. The impact of this change on forces acting in the trolleybus suspension elements (i.e. in air springs and shock absorbers and radius rods on the trolleybus chassis when running on an uneven test track was investigated using multibody simulations. Time histories of the forces calculated utilising multibody models were used as input data of the trolleybus finite element models.

  8. A computed torque method based attitude control with optimal force distribution for articulated body mobile robots

    International Nuclear Information System (INIS)

    Fukushima, Edwardo F.; Hirose, Shigeo

    2000-01-01

    This paper introduces an attitude control scheme based in optimal force distribution using quadratic programming which minimizes joint energy consumption. This method shares similarities with force distribution for multifingered hands, multiple coordinated manipulators and legged walking robots. In particular, an attitude control scheme was introduced inside the force distribution problem, and successfully implemented for control of the articulated body mobile robot KR-II. This is an actual mobile robot composed of cylindrical segments linked in series by prismatic joints and has a long snake-like appearance. These prismatic joints are force controlled so that each segment's vertical motion can automatically follow the terrain irregularities. An attitude control is necessary because this system acts like a system of wheeled inverted pendulum carts connected in series, being unstable by nature. The validity and effectiveness of the proposed method is verified by computer simulation and experiments with the robot KR-II. (author)

  9. Between casual commitment and cross-media articulation – the faith of the Napkin

    DEFF Research Database (Denmark)

    Bødker, Susanne; Petersen, Anja Bechmann

    2008-01-01

    was wrong with the Napkin, and why did it fail? The Napkin suffered many of the problems known to CSCW: It laced reciprocity of visibility and commitment between reporters and editors; it did not give sufficient overview of media processes and products, in particular it was impossible to motivate stories......This paper presents an analysis of the Napkin, a collaborative technology designed to support news reporters in their struggle to handle the integrated production of news stories to multiple media platforms. The Napkin was abandoned while we studied it, and this raised the questions of what...... and overview their relationships with other stories. The casual metaphor of a Napkin was in contrast to how commitments got perceived by reporters and editors. The paper uses these discussions to revisit the notion of articulation work...

  10. Limits and articulations between modalities and meditative as markers of utterance responsibility in academic text

    Directory of Open Access Journals (Sweden)

    Jorge Luis Queiroz Carvalho

    2014-07-01

    Full Text Available In this work we aim to identify and describe the markers of utterance responsibility in academic texts through modality and mediative. The theoretical and methodological approach we follow is based on textual analysis of discourses postulates according to Adam (2011. Our theoretical background is also based on Rabatel (2009 studies on the utterance responsibility; Campos (2004 and Castilho & Castilho (2002 on the category of modalities, Guentchèva (1994 regarding the meditative category, and Neves (2012, which promotes a discussion that articulates both categories. The analysis showed that speakers-utterers (S1/U1 base their points of view on the second utterer's points of view (U2. We also observed that S1/U1 expressed different degrees of engagement in relation to the information reported, assuming or imputing the utterance responsibility

  11. Is It Necessary to Articulate a Research Methodology When Reporting on Theoretical Research?

    Directory of Open Access Journals (Sweden)

    Juliana Smith

    2017-05-01

    Full Text Available In this paper the authors share their insights on whether it is necessary to articulate a research methodology when reporting on theoretical research. Initially the authors, one being a supervisor and the other, a PhD student and a colleague, were confronted with the question during supervision and writing of a thesis on theoretical research. Reflection on the external examiners’ reports about whether a research methodology for theoretical research is necessary prompted the writing of this paper. In order to answer the question, the characteristics of theoretical research are clarified and contrasting views regarding the necessity or not of including a research methodology section in such a thesis, are examined. The paper also highlights the justification for including a research methodology in a thesis that reports on theoretical research, investigates the soundness of such justification and finally draws conclusions on the matter.

  12. Towards an Articulation of the Material and Visual Turn in Organization Studies

    DEFF Research Database (Denmark)

    Boxenbaum, Eva; Jones, Candace; Meyer, Renate

    2018-01-01

    Contemporary organizations increasingly rely on images, logos, videos, building materials, graphic and product design, and a range of other material and visual artifacts to compete, communicate, form identity and organize their activities. This Special Issue focuses on materiality and visuality...... on the articles in the special issue, we further explore the affordances and limits of the material and visual dimensions of organizing in relation to novelty. We conclude by pointing out theoretical avenues for advancing multimodal research, and discuss some of the ethical, pragmatic and identity...... in the course of objectifying and reacting to novel ideas, and, more broadly, contributes to organizational theory by articulating the emergent contours of a material and visual turn in the study of organizations. In this Introduction, we provide an overview of research on materiality and visuality. Drawing...

  13. Procedure of Sauve-Kapandji modified for posttraumatic and degenerative disorders of the radioulnar distal articulation

    International Nuclear Information System (INIS)

    Rodriguez B, Nestor Julian; Suarez Romero, Fabio; Bocanegra Navia, Sergio; Garcia Herrera, Alvaro

    2005-01-01

    This is observational prospective study type series of cases that shows the experience of the group of surgery of hand of the Central Military Hospital between January of 1998 and Julio the 2003. 65 patients were included like surgery of salvage of the articulation radioulnar distal in different traumatic and degenerative pathologies, comparing the results with those published in the world literature. According to the modified functional scale of May this procedure showed excellent and good results in 90% of the patients. They recovered the lost function and improved the function of the distal radioulnar joint, returning to their activities of the daily life. This technique is recommended as a sure and efficient procedure, because the patients present a remarkable improvement in its quality of life and they can return to its labor activity, these results correlated with the results of the published literature

  14. Tensorial dynamic time warping with articulation index representation for efficient audio-template learning.

    Science.gov (United States)

    Le, Long N; Jones, Douglas L

    2018-03-01

    Audio classification techniques often depend on the availability of a large labeled training dataset for successful performance. However, in many application domains of audio classification (e.g., wildlife monitoring), obtaining labeled data is still a costly and laborious process. Motivated by this observation, a technique is proposed to efficiently learn a clean template from a few labeled, but likely corrupted (by noise and interferences), data samples. This learning can be done efficiently via tensorial dynamic time warping on the articulation index-based time-frequency representations of audio data. The learned template can then be used in audio classification following the standard template-based approach. Experimental results show that the proposed approach outperforms both (1) the recurrent neural network approach and (2) the state-of-the-art in the template-based approach on a wildlife detection application with few training samples.

  15. The articulated body. Physical activity, fitness and neew technologies of health

    DEFF Research Database (Denmark)

    Otto, Lene

    2010-01-01

    learns to be sensitive to differences, shape individuals’ bodily experiences. I will discuss how the Foucauldian concept of ‘technologies of the self’ and Latour’s idea bodies are ´learning to be affected’ can be helpful to understand this process. Latour suggests that the concept of ‘articulation’ – how...... of anticipations of fit bodies as essential to individual health. I identify a physical activity discourse in which new modes of knowing, experiencing and doing bodies involve new types of health technologies in which bodies must be connected to mechanical and electronic appliances, inscribed with biomedical...... the body become more articulated through knowledge and practices - can help direct our focus to “take on board the artificial and material components allowing one to progressively have a body” (1), and according to Foucault, technologies of the self “permit individuals to effect by their own means...

  16. Video-cued narrative reflection: a research approach for articulating tacit, relational, and embodied understandings.

    Science.gov (United States)

    Raingruber, Bonnie

    2003-10-01

    The author's purpose in this article is to describe the effectiveness of video-cued narrative reflection as a research approach for accessing relational, practice-based, and lived understandings. Video-cued narrative reflection provides moment-by-moment access to tacit experience. The immediate nature of the videotape captures emotional nuances, embodied perceptions, spatial influences, relational understandings, situational factors, and temporal manifestations. By watching videotaped interactions, participants are able to re-collect, re-experience, and interpret their life world. Video-cued narrative reflection allows participants to be simultaneously engaged and reflective while describing significant understandings. By inserting audiotaped reflective commentary of participants into the original videotape transcript, contextual meanings can be located and articulated more easily. Although not appropriate for all types of research, this approach offers promise for certain studies.

  17. Articulating the strategies for maximising the inclusion of people with dementia in qualitative research studies.

    Science.gov (United States)

    Murphy, Kathy; Jordan, Fionnuala; Hunter, Andrew; Cooney, Adeline; Casey, Dympna

    2015-11-01

    It is essential to understand the experience of living with dementia from the perspective of the person with dementia so that services can be appropriately constructed. This review paper, drawing on prior work, identifies key strategies for the meaningful inclusion of persons with dementia within qualitative research studies, it examines the articulation of these strategies and shares how these strategies were operationalised within one national research study in Ireland. Strategies within the literature were categorised and then synthesized into a guide consisting of four main areas; gaining COnsent, maximizing Responses, Telling the story, and Ending on a high (CORTE). The CORTE guideline was used to as a tool for analysing relevant research reports. CORTE is a synthesized account of grouped strategies that could be used to maximize the meaningful involvement of persons with dementia and can also provide a guide for reporting the strategies used so that researchers can learn from each other. © The Author(s) 2014.

  18. Mesoscale hybrid calibration artifact

    Science.gov (United States)

    Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  19. Automatic generation of statistical pose and shape models for articulated joints.

    Science.gov (United States)

    Xin Chen; Graham, Jim; Hutchinson, Charles; Muir, Lindsay

    2014-02-01

    Statistical analysis of motion patterns of body joints is potentially useful for detecting and quantifying pathologies. However, building a statistical motion model across different subjects remains a challenging task, especially for a complex joint like the wrist. We present a novel framework for simultaneous registration and segmentation of multiple 3-D (CT or MR) volumes of different subjects at various articulated positions. The framework starts with a pose model generated from 3-D volumes captured at different articulated positions of a single subject (template). This initial pose model is used to register the template volume to image volumes from new subjects. During this process, the Grow-Cut algorithm is used in an iterative refinement of the segmentation of the bone along with the pose parameters. As each new subject is registered and segmented, the pose model is updated, improving the accuracy of successive registrations. We applied the algorithm to CT images of the wrist from 25 subjects, each at five different wrist positions and demonstrated that it performed robustly and accurately. More importantly, the resulting segmentations allowed a statistical pose model of the carpal bones to be generated automatically without interaction. The evaluation results show that our proposed framework achieved accurate registration with an average mean target registration error of 0.34 ±0.27 mm. The automatic segmentation results also show high consistency with the ground truth obtained semi-automatically. Furthermore, we demonstrated the capability of the resulting statistical pose and shape models by using them to generate a measurement tool for scaphoid-lunate dissociation diagnosis, which achieved 90% sensitivity and specificity.

  20. Trajectory control of an articulated robot with a parallel drive arm based on splines under tension

    Science.gov (United States)

    Yi, Seung-Jong

    Today's industrial robots controlled by mini/micro computers are basically simple positioning devices. The positioning accuracy depends on the mathematical description of the robot configuration to place the end-effector at the desired position and orientation within the workspace and on following the specified path which requires the trajectory planner. In addition, the consideration of joint velocity, acceleration, and jerk trajectories are essential for trajectory planning of industrial robots to obtain smooth operation. The newly designed 6 DOF articulated robot with a parallel drive arm mechanism which permits the joint actuators to be placed in the same horizontal line to reduce the arm inertia and to increase load capacity and stiffness is selected. First, the forward kinematic and inverse kinematic problems are examined. The forward kinematic equations are successfully derived based on Denavit-Hartenberg notation with independent joint angle constraints. The inverse kinematic problems are solved using the arm-wrist partitioned approach with independent joint angle constraints. Three types of curve fitting methods used in trajectory planning, i.e., certain degree polynomial functions, cubic spline functions, and cubic spline functions under tension, are compared to select the best possible method to satisfy both smooth joint trajectories and positioning accuracy for a robot trajectory planner. Cubic spline functions under tension is the method selected for the new trajectory planner. This method is implemented for a 6 DOF articulated robot with a parallel drive arm mechanism to improve the smoothness of the joint trajectories and the positioning accuracy of the manipulator. Also, this approach is compared with existing trajectory planners, 4-3-4 polynomials and cubic spline functions, via circular arc motion simulations. The new trajectory planner using cubic spline functions under tension is implemented into the microprocessor based robot controller and

  1. Articulating current service development practices: a qualitative analysis of eleven mental health projects.

    Science.gov (United States)

    Jun, Gyuchan Thomas; Morrison, Cecily; Clarkson, P John

    2014-01-17

    The utilisation of good design practices in the development of complex health services is essential to improving quality. Healthcare organisations, however, are often seriously out of step with modern design thinking and practice. As a starting point to encourage the uptake of good design practices, it is important to understand the context of their intended use. This study aims to do that by articulating current health service development practices. Eleven service development projects carried out in a large mental health service were investigated through in-depth interviews with six operation managers. The critical decision method in conjunction with diagrammatic elicitation was used to capture descriptions of these projects. Stage-gate design models were then formed to visually articulate, classify and characterise different service development practices. Projects were grouped into three categories according to design process patterns: new service introduction and service integration; service improvement; service closure. Three common design stages: problem exploration, idea generation and solution evaluation - were then compared across the design process patterns. Consistent across projects were a top-down, policy-driven approach to exploration, underexploited idea generation and implementation-based evaluation. This study provides insight into where and how good design practices can contribute to the improvement of current service development practices. Specifically, the following suggestions for future service development practices are made: genuine user needs analysis for exploration; divergent thinking and innovative culture for idea generation; and fail-safe evaluation prior to implementation. Better training for managers through partnership working with design experts and researchers could be beneficial.

  2. Simulating Dynamics of the System of Articulated Rigid Bodies with Joint Friction

    Directory of Open Access Journals (Sweden)

    M. V. Michaylyuk

    2016-01-01

    Full Text Available The subject of the work is to simulate dynamics of the system of articulated rigid bodies in the virtual environment complexes. The work aim is to develop algorithms and methods to simulate the multi-body system dynamics with joint friction to ensure all calculations in real time in line with visual realistic behavior of objects in a scene.The paper describes the multibody system based on a maximal set of coordinates, and to simulate the joint friction is used a Coulomb's law of dry friction. Joints are described using the holonomic constraints and their derivatives that specify the constraints on velocities of joined bodies. Based on The Coulomb’s law a correlation for the friction impulse values has been derived as an inequality. If the friction impulse performs a constraint that is a lack of relative motion of two joint-joined bodies, there is a static friction in the joint. Otherwise, there is a dynamic friction in the joint. Using a semi-implicit Euler method allows us to describe dynamics of articulated rigid bodies with joint friction as a system of linear algebraic equations and inequalities for the unknown velocities and impulse values.To solve the obtained system of equations and inequalities is used an iterative method of sequential impulses, which sequentially processes constraints for each joint with impulse calculation and its application to the joined bodies rather than considers the entire system. To improve the method convergence, at each iteration the calculated impulses are accumulated for their further using as an initial approximation at the next step of simulation.The proposed algorithms and methods have been implemented in the training complex dynamics subsystem, developed in SRISA RAS. Evaluation of these methods and algorithms has demonstrated their full adequacy to requirements for virtual environment systems and training complexes.

  3. Hybrid quantum information processing

    Energy Technology Data Exchange (ETDEWEB)

    Furusawa, Akira [Department of Applied Physics, School of Engineering, The University of Tokyo (Japan)

    2014-12-04

    I will briefly explain the definition and advantage of hybrid quantum information processing, which is hybridization of qubit and continuous-variable technologies. The final goal would be realization of universal gate sets both for qubit and continuous-variable quantum information processing with the hybrid technologies. For that purpose, qubit teleportation with a continuousvariable teleporter is one of the most important ingredients.

  4. Articulated System to Analyse Digital Media (ASADM: a proposal about what and how to study online newspapers

    Directory of Open Access Journals (Sweden)

    Lluís Codina

    2014-05-01

    Full Text Available Throughout this article, we are presenting a proposal to conduct digital media studies as one of the first deliverables of an ongoing research project. This proposal, which we are calling “Articulated System to Analyse Digital Media” (ASADM: consists of a set of concepts presented through specific terminology, and of a group of articulated elements allowing to determine what we call the what (parameters and how (indicators of any future study regarding online newspapers or digital media. Thus, we obtain an operative analysis protocol as a deliverable. In between, we characterize the typical context of the sort of studies that constitute the context for our proposal.

  5. Marine Fish Hybridization

    KAUST Repository

    He, Song

    2017-04-01

    Natural hybridization is reproduction (without artificial influence) between two or more species/populations which are distinguishable from each other by heritable characters. Natural hybridizations among marine fishes were highly underappreciated due to limited research effort; it seems that this phenomenon occurs more often than is commonly recognized. As hybridization plays an important role in biodiversity processes in the marine environment, detecting hybridization events and investigating hybridization is important to understand and protect biodiversity. The first chapter sets the framework for this disseration study. The Cohesion Species Concept was selected as the working definition of a species for this study as it can handle marine fish hybridization events. The concept does not require restrictive species boundaries. A general history and background of natural hybridization in marine fishes is reviewed during in chapter as well. Four marine fish hybridization cases were examed and documented in Chapters 2 to 5. In each case study, at least one diagnostic nuclear marker, screened from among ~14 candidate markers, was found to discriminate the putative hybridizing parent species. To further investigate genetic evidence to support the hybrid status for each hybrid offspring in each case, haploweb analysis on diagnostic markers (nuclear and/or mitochondrial) and the DAPC/PCA analysis on microsatellite data were used. By combining the genetic evidences, morphological traits, and ecological observations together, the potential reasons that triggered each hybridization events and the potential genetic/ecology effects could be discussed. In the last chapter, sequences from 82 pairs of hybridizing parents species (for which COI barcoding sequences were available either on GenBank or in our lab) were collected. By comparing the COI fragment p-distance between each hybridizing parent species, some general questions about marine fish hybridization were discussed: Is

  6. Malocclusion and articulation disorders in mouth breathing children from public schools in Santa Maria, Rio Grande do Sul

    Directory of Open Access Journals (Sweden)

    Ana Maria Toniolo da Silva

    2008-01-01

    Full Text Available Objective: To verify the occurrence and types of malocclusion and articulation disorders in mouth breathing children at public schools.Methods: An evaluation was made of 219 children of both genders, between 5 and 12 years of age, attending two public schools in the city of Santa Maria, Rio Grande do Sul, Brazil; with 121 mouth breather children being selected for this study. Orthodontic and phonoaudiological evaluation were made to verify the breathing mode and presence or absence of malocclusion and articulation disorders.Results: It was observed that 100% of the mouth breather children presented malocclusion, 49.60% being Angle’s Class II, 48.76% ClassI and 1.65% Class III. It was also verified that 18.2% of the mouth breather children presented articulation disturbance. Conclusion: All mouth breathing children presented some type of malocclusion, the majority being Angle’s Class II, followed by Class I. The articulation disorders most frequently observed was anterior lisping.

  7. Boundaries to the articulation of possible selves through social networking sites: the case of Facebook profilers' social connectedness

    NARCIS (Netherlands)

    Zwier, S.; Araujo, T.; Boukes, M.; Willemsen, L.

    2011-01-01

    This study aims to contribute to an emerging literature that seeks to understand how identity markers on social networking sites (SNSs) shape interpersonal impressions, and particularly the boundaries that SNSs present for articulating unconstrained 'hoped-for possible selves.' An experiment

  8. Hemispheric Asymmetries Depend on the Phonetic Feature: A Dichotic Study of Place of Articulation and Voicing in French Stops

    Science.gov (United States)

    Bedoin, Nathalie; Ferragne, Emmanuel; Marsico, Egidio

    2010-01-01

    Dichotic listening experiments show a right-ear advantage (REA), reflecting a left-hemisphere (LH) dominance. However, we found a decrease in REA when the initial stop consonants of two simultaneous French CVC words differed in voicing rather than place of articulation (Experiment 1). This result suggests that the right hemisphere (RH) is more…

  9. Values Education in the Mathematics Classroom: Subject Values, Educational Values and One Teacher's Articulation of Her Practice

    Science.gov (United States)

    Bills, Liz; Husbands, Chris

    2005-01-01

    The issue of values has been a longstanding concern of mathematics education research. Attempts have been made to analyze the specifically mathematical values which characterize the practice of mathematics teachers. In this paper we draw on one teacher's articulation of her practice to explore values issues in the teaching of mathematics, drawing…

  10. Articulated vehicles of 25 meter and 60 ton in The Netherlands: the start of a pilot project

    NARCIS (Netherlands)

    Hoogvelt, R.B.J.; Huijbers, J.J.W.

    1998-01-01

    At this moment the total allowable length of an articulated vehicle in The Netherlands is 18.35 meter and its total weight is 50 ton. Several Dutch transportation organisations requested a pilot project with longer and heavier vehicles for heavy goods transpotation. Because of the environmental

  11. Articulated, Performance-Based Instruction Objectives Guide for Air Conditioning, Refrigeration, and Heating. Volume II (Second Year).

    Science.gov (United States)

    Henderson, William Edward, Jr., Ed.

    This articulation guide contains 17 units of instruction for the second year of a two-year vocational program designed to prepare the high school graduate to install, maintain, and repair various types of residential and commercial heating, air conditioning, and refrigeration equipment. The units are designed to help the student to expand and…

  12. Differentiation to improve the articulation between levels : In the teaching of English in primary and secondary education in the Netherlands

    NARCIS (Netherlands)

    A.P. de Kraay

    2016-01-01

    In 1986, English became a compulsory subject in primary education in The Netherlands1. While secondary schools have, by law, been required to offer English since 1863 (Wilhelm, 2005) the articulation between Dutch primary and secondary education levels of English language teaching has always been

  13. Preschool Speech Error Patterns Predict Articulation and Phonological Awareness Outcomes in Children with Histories of Speech Sound Disorders

    Science.gov (United States)

    Preston, Jonathan L.; Hull, Margaret; Edwards, Mary Louise

    2013-01-01

    Purpose: To determine if speech error patterns in preschoolers with speech sound disorders (SSDs) predict articulation and phonological awareness (PA) outcomes almost 4 years later. Method: Twenty-five children with histories of preschool SSDs (and normal receptive language) were tested at an average age of 4;6 (years;months) and were followed up…

  14. Implications of Articulating Machinery on Operator Line of Sight and Efficacy of Camera Based Proximity Detection Systems

    Directory of Open Access Journals (Sweden)

    Nicholas Schwabe

    2017-07-01

    Full Text Available The underground mining industry, and some above ground operations, rely on the use of heavy equipment that articulates to navigate corners in the tight confines of the tunnels. Poor line of sight (LOS has been identified as a problem for safe operation of this machinery. Proximity detection systems, such as a video system designed to provide a 360 degree view around the machine have been implemented to improve the available LOS for the operator. A four-camera system was modeled in a computer environment to assess LOS on a 3D cad model of a typical, articulated machine. When positioned without any articulation, the system is excellent at removing blind spots for a machine driving straight forward or backward in a straight tunnel. Further analysis reveals that when the machine articulates in a simulated corner section, some camera locations are no longer useful for improving LOS into the corner. In some cases, the operator has a superior view into the corner, when compared to the best available view from the camera. The work points to the need to integrate proximity detection systems at the design, build, and manufacture stage, and to consider proper policy and procedures that would address the gains and limits of the systems prior to implementation.

  15. Implications of Shared Interactive Displays for Work at a Surgery Ward: Coordination, Articulation Work and Context-awareness

    DEFF Research Database (Denmark)

    Bossen, Claus; Jensen, Lis Witte Kjær

    2008-01-01

    We report on experiences gained from the use at a surgery ward of shared interactive displays to support coordination and communication.  The displays merge large displays, video feed, RFID tag, chat and mobile phones to facilitate better coordination and articulation of work tasks and enhance...

  16. Informal work and formal plans: articulating the active role of patients in cancer trajectories

    Directory of Open Access Journals (Sweden)

    Rikke Juul Dalsted

    2012-12-01

    Full Text Available Introduction: Formal pathways models outline that patients should receive information in order to experience a coherent journey but do not describe an active role for patients or their relatives. The aim of this is paper is to articulate and discuss the active role of patients during their cancer trajectories.  Methods and theory: An in-depth case study of patient trajectories at a Danish hospital and surrounding municipality using individual interviews with patients. Theory about trajectory and work by Strauss was included.  Results: Patients continuously took initiatives to organize their treatment and care. They initiated processes in the trajectories, and acquired information, which they used to form their trajectories.  Patients presented problems to the healthcare professionals in order to get proper help when needed.  Discussion: Work done by patients was invisible and not perceived as work. The patients' requests were not sufficiently supported in the professional organisation of work or formal planning. Patients' insertion and use of information in their trajectories challenged professional views and working processes. And the design of the formal pathway models limits the patients´ active participation. When looking at integrated care from the perspective of patients, the development of a more holistic and personalized approach is needed. Introduction: Formal pathway models outline that patients should receive information in order to experience a coherent journey but do not describe an active role for patients or their relatives. The aim of this is paper is to articulate and discuss the active role of patients during their cancer trajectories. Methods and theory: An in-depth case study of patient trajectories at a Danish hospital and surrounding municipality using individual interviews with patients. Theory about trajectory and work by Strauss was included. Results: Patients continuously took initiatives to organize their

  17. Career Preparedness and School Achievement of Portuguese Children: Longitudinal Trend Articulations

    Directory of Open Access Journals (Sweden)

    Maria do Céu Taveira

    2017-04-01

    Full Text Available Social Cognitive Career Theory suggests that students' preparedness for the school-to-work transition is a developmental process. Middle school children explore various careers, obtain feedback about their academic progress, and develop career self-efficacy and outcome expectations. These processes advance provisional educational/occupational goals. The literature has suggested articulations between career and academic development and how both vary across demographic characteristics, but longitudinal studies linking these processes are scarce. This study tested articulations between career preparedness and academic achievement during middle school years and employed gender and geographical location as potential moderators affecting the linkage between career and school domains. Participants included 429 children (47.8% girls from northern (69.5% and central Portugal (30.5% followed across four occasions of measurement (MageWave1 = 10.23, SD = 0.50. Data was collected with school records, the Multidimensional Scales of Perceived Self-Efficacy, Career Exploratory Outcome Expectations Scale, Childhood Career Exploration Inventory and Childhood Career Development Scale. Average and orthnormalized linear, quadratic and cubic trends were computed. Pearson correlation coefficients suggested positive and statistically significant associations between career exploratory outcome expectations and academic achievement average trends. Career planning and self-efficacy expectations were negatively associated with academic achievement quadratic trends. Multiple linear regression models suggested that career exploratory outcome expectations and career planning were respectively statistically significant predictors of the average and quadratic trends of academic achievement. Gender moderated the association between the career variables and academic achievement linear trends as well as the relation of career planning and self-efficacy with academic achievement

  18. Preschool speech articulation and nonword repetition abilities may help predict eventual recovery or persistence of stuttering.

    Science.gov (United States)

    Spencer, Caroline; Weber-Fox, Christine

    2014-09-01

    In preschool children, we investigated whether expressive and receptive language, phonological, articulatory, and/or verbal working memory proficiencies aid in predicting eventual recovery or persistence of stuttering. Participants included 65 children, including 25 children who do not stutter (CWNS) and 40 who stutter (CWS) recruited at age 3;9-5;8. At initial testing, participants were administered the Test of Auditory Comprehension of Language, 3rd edition (TACL-3), Structured Photographic Expressive Language Test, 3rd edition (SPELT-3), Bankson-Bernthal Test of Phonology-Consonant Inventory subtest (BBTOP-CI), Nonword Repetition Test (NRT; Dollaghan & Campbell, 1998), and Test of Auditory Perceptual Skills-Revised (TAPS-R) auditory number memory and auditory word memory subtests. Stuttering behaviors of CWS were assessed in subsequent years, forming groups whose stuttering eventually persisted (CWS-Per; n=19) or recovered (CWS-Rec; n=21). Proficiency scores in morphosyntactic skills, consonant production, verbal working memory for known words, and phonological working memory and speech production for novel nonwords obtained at the initial testing were analyzed for each group. CWS-Per were less proficient than CWNS and CWS-Rec in measures of consonant production (BBTOP-CI) and repetition of novel phonological sequences (NRT). In contrast, receptive language, expressive language, and verbal working memory abilities did not distinguish CWS-Rec from CWS-Per. Binary logistic regression analysis indicated that preschool BBTOP-CI scores and overall NRT proficiency significantly predicted future recovery status. Results suggest that phonological and speech articulation abilities in the preschool years should be considered with other predictive factors as part of a comprehensive risk assessment for the development of chronic stuttering. At the end of this activity the reader will be able to: (1) describe the current status of nonlinguistic and linguistic predictors for

  19. Development and demonstration of use of methane/hydrogen blends as fuel in existing methane-driven buses; Utveckling och demonstration av anvaendning av metan/vaetgasblandningar som braensle i befintliga metangasdrivna bussar

    Energy Technology Data Exchange (ETDEWEB)

    Joensson, Owe

    2006-10-15

    Two natural gas buses in Malmoe have in a project been converted to run on mixtures of hydrogen and natural gas. The buses have been in operation from September 2003 to December 2005 and have during the whole extent of the project been in commercial operation with passengers. One bus has been refuelled with a mixture containing 8% hydrogen and another with 25% hydrogen. One of the buses has during limited periods been refuelled with natural gas in order to establish differences in fuel consumption between the different fuels. A number of different supporting activities have been performed in conjunction to the project: Tests at the Lund Univ. with hydrogen addition to natural gas in a one cylinder test engine and in a 6 cylinder natural gas engine. Safety analysis for handling of hydrogen/natural gas blends. Hydrogen compatibility study of material and components in bus fuel system. Test of leak detection systems for hydrogen and hydrogen/natural gas blends. Development of safety routines for operation and maintenance staff. Emission measurement during road operation with mobile equipment. Follow up of filling station for hydrogen/natural gas blends. The results from the projects are: The buses did not need to be modified in any way in order to run on mixtures with up to 8 vol-% hydrogen. The buses could, in less than 4 h, be modified to run on mixtures with 25 vol-% hydrogen. The conversion was accomplished by changing one computer chip in the engine control system, thus altering the air/fuel ratio and adjusting the ignition angle. The fuel consumption of the buses was reduced by 20-30% by hydrogen addition. The largest relative influence was achieved with 8% hydrogen addition. The reduced fuel consumption in combination with reduced carbon content in the fuel resulted in a total reduction in CO{sub 2}-emission by approximately 35% using 8% hydrogen (by volume). Addition of hydrogen to natural gas has thus proved to be a more efficient way of reducing CO{sub 2

  20. Ultra-Capacitor Energy Storage in a Large Hybrid Electric Bus

    Science.gov (United States)

    Viterna, L. A.

    1997-01-01

    The power requirements for inner city transit buses are characterized by power peaks about an order of magnitude larger than the average power usage of the vehicle. For these vehicles, hybrid power trains can offer significantly improved fuel economy and exhaust emissions. A critical design challenge, however, has been developing the energy storage and power management system to respond to these rapid power variations. Most hybrid vehicles today use chemical energy storage batteries to supplement the power from the fuel burning generator unit. Chemical storage batteries however, present several difficulties in power management and control. These difficulties include (1) inadequate life, (2) limited current delivery as well as absorption during regenerative braking, (3) inaccurate measurement of state of charge, and (4) stored energy safety issues. Recent advances in ultra-capacitor technology create an opportunity to address these concerns. The NASA Lewis Research Center, in cooperation with industry and academia, has developed an advanced hybrid electric transit bus using ultra-capacitors as the primary energy storage system. At over 15,000-kg gross weight, this is the largest vehicle of its kind ever built using this advanced energy storage technology. Results of analyses show that the vehicle will match the performance of an equivalent conventionally powered vehicle over typical inner city drive cycles. This paper describes the overall power system architecture, the evolution of the control strategy, and analysis of power flow and vehicle performance.

  1. Influence of Timing of Delayed Hard Palate Closure on Articulation Skills in 3-Year-Old Danish Children with Unilateral Cleft Lip and Palate

    Science.gov (United States)

    Willadsen, Elisabeth; Boers, Maria; Schöps, Antje; Kisling-Møller, Mia; Nielsen, Joan Bogh; Jørgensen, Line Dahl; Andersen, Mikael; Bolund, Stig; Andersen, Helene Søgaard

    2018-01-01

    Background: Differing results regarding articulation skills in young children with cleft palate (CP) have been reported and often interpreted as a consequence of different surgical protocols. Aims: To assess the influence of different timing of hard palate closure in a two-stage procedure on articulation skills in 3-year-olds born with unilateral…

  2. Visual Iconicity Across Sign Languages: Large-Scale Automated Video Analysis of Iconic Articulators and Locations

    Science.gov (United States)

    Östling, Robert; Börstell, Carl; Courtaux, Servane

    2018-01-01

    We use automatic processing of 120,000 sign videos in 31 different sign languages to show a cross-linguistic pattern for two types of iconic form–meaning relationships in the visual modality. First, we demonstrate that the degree of inherent plurality of concepts, based on individual ratings by non-signers, strongly correlates with the number of hands used in the sign forms encoding the same concepts across sign languages. Second, we show that certain concepts are iconically articulated around specific parts of the body, as predicted by the associational intuitions by non-signers. The implications of our results are both theoretical and methodological. With regard to theoretical implications, we corroborate previous research by demonstrating and quantifying, using a much larger material than previously available, the iconic nature of languages in the visual modality. As for the methodological implications, we show how automatic methods are, in fact, useful for performing large-scale analysis of sign language data, to a high level of accuracy, as indicated by our manual error analysis.

  3. Design Optimization of Steering Mechanisms for Articulated Off-Road Vehicles Based on Genetic Algorithms

    Directory of Open Access Journals (Sweden)

    Chen Zhou

    2018-02-01

    Full Text Available Two cylinders arranged symmetrically on a frame have become a major form of steering mechanism for articulated off-road vehicles (AORVs. However, the differences of stroke and arm lead to pressure fluctuation, vibration noise, and a waste of torque. In this paper, the differences of stroke and arm are reduced based on a genetic algorithm (GA. First, the mathematical model of the steering mechanism is put forward. Then, the difference of stroke and arm are optimized using a GA. Finally, a FW50GLwheel loader is used as an example to demonstrate the proposed GA-based optimization method, and its effectiveness is verified by means of automatic dynamic analysis of mechanical systems (ADAMS. The stroke difference of the steering hydraulic cylinders was reduced by 92% and the arm difference reached a decrease of 78% through GA optimization, in comparison with unoptimized structures. The simulation result shows that the steering mechanism optimized by GA behaved better than by previous methods.

  4. Global Knowledge Futures: Articulating the Emergence of a New Meta-level Field

    Directory of Open Access Journals (Sweden)

    Jennifer M. Gidley

    2013-06-01

    Full Text Available In this paper I articulate a new meta-level field of studies that I call global knowledge futures—a field through which other emerging transdisciplinary fields can be integrated to cohere knowledge at a higher level. I contrast this with the current dominant knowledge paradigm of the global knowledge economy with its fragmentation, commodification and instrumentalism based on neoliberal knowledge capitalism. I take a big-picture, macrohistorical lens to the new thinking and new knowledge patterns that are emerging within the evolution of consciousness discourse. I explore three discourses: postformal studies, integral studies and planetary studies—using a fourth discourse, futures studies, to provide a macro-temporal framing. By extending the meta-fields of postformal, integral and planetary studies into a prospective future dimension, I locate areas of development where these leading-edge discourses can be brought into closer dialogue with each other. In this meeting point of four boundary-spanning discourses I identify the new meta-level field of global knowledge futures, grounded in human thinking capacities, such as creativity, imagination, dialogue and collaboration.

  5. What's in and what's out in branding? A novel articulation effect for brand names.

    Science.gov (United States)

    Topolinski, Sascha; Zürn, Michael; Schneider, Iris K

    2015-01-01

    The present approach exploits the biomechanical connection between articulation and ingestion-related mouth movements to introduce a novel psychological principle of brand name design. We constructed brand names for diverse products with consonantal stricture spots either from the front to the rear of the mouth, thus inwards (e.g., BODIKA), or from the rear to the front, thus outwards (e.g., KODIBA). These muscle dynamics resemble the oral kinematics during either ingestion (inwards), which feels positive, or expectoration (outwards), which feels negative. In 7 experiments (total N = 1261), participants liked products with inward names more than products with outward names (Experiment 1), reported higher purchase intentions (Experiment 2), and higher willingness-to-pay (Experiments 3a-3c, 4, 5), with the price gain amounting to 4-13% of the average estimated product value. These effects occurred across English and German language, under silent reading, for both edible and non-edible products, and even in the presence of a much stronger price determinant, namely fair-trade production (Experiment 5).

  6. Inverse kinematics research using obstacle avoidance geometry method for EAST Articulated Maintenance Arm (EAMA)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Kun, E-mail: wangkun@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Lappeenranta University of Technology, Lappeenranta (Finland); University of Science and Technology of China, Hefei (China); Song, Yuntao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); University of Science and Technology of China, Hefei (China); Wu, Huapeng [Lappeenranta University of Technology, Lappeenranta (Finland); Wei, Xiaoyang; Khan, Shahab Ud-Din; Cheng, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2017-06-15

    Highlights: • An Obstacle Topology Partition Projection (OTPP) method of tokamak-like vessel for collision detection. • Median values preferentially of depth-first search algorithm for solving redundant inverse kinematics based on OTPP. • Application of RIK in grasping target objects. - Abstract: This paper proposed a new method for solving inverse kinematics (IK) of a redundant manipulator called EAST Articulated Maintenance Arm (EAMA), which is applied in the fusion reactor EAST (Experimental Advanced Superconducting Tokamak) and used to complete some maintenance tasks in the complex areas. However, it is difficult to realize remote control due to its redundancy, coupling structure and the complex operational environment. The IK research of the robot played a vital role to the manipulator’s motion control algorithm of remote handling (RH) technology. An Obstacle Topology Partition Projection (OTPP) approach integrated with Modified Inverse Depth First Search (MIDFS) method was presented. This is a kind of new geometric algorithm in order to solve the problem of IK for a high-redundancy manipulator. It can also be used to find a solution satisfying collision avoidance with optimal safety distance between the manipulator and obstacles. Simulations and experiments were conducted to demonstrate the efficiency and accuracy of the proposed method.

  7. Critical element study on autonomous position control of articulated-arm type manipulator

    International Nuclear Information System (INIS)

    Oka, Kiyoshi; Kakudate, Satoshi; Nakahira, Masataka

    1994-10-01

    An articulated-arm type manipulator can be operated effectively in a restricted space due to its flexibility and it can be attractive for a wide range of in-vessel maintenance such as viewing, inspection and limiter handling in fusion experimental reactors. In case of the in-vessel maintenance using a flexible manipulator, it is quite essential to develop an autonomous control method for compensating a deflection of manipulator so as to minimize the maintenance time with high precision. For this purpose, a new position control method using a combination of neural network predictor with a rigid inverse kinematics is being developed. The key features of this method are to simplify a kinematics modeling of flexible manipulator, to enable quick position compensation in stead of ordinary large matrix compensation, and to be applicable to a wide variety of manipulator characteristics. A sub-scaled model of flexible manipulator with 4 joints has been fabricated for a benchmark experiments of the autonomous position control. Comparing analytical simulation with experiments using the flexible manipulator, it has been demonstrated that the new position control method gives significant improvement in control performance with high precision in order of a figure. In addition, further optimization can be possible by adding other non-linear predictors such as radial basis function and fuzzy modeling. This paper describes the details of a sub-scaled flexible manipulator and a neural network position control system as well as results of analytical simulation and benchmark experiments. (author)

  8. Inverse kinematics research using obstacle avoidance geometry method for EAST Articulated Maintenance Arm (EAMA)

    International Nuclear Information System (INIS)

    Wang, Kun; Song, Yuntao; Wu, Huapeng; Wei, Xiaoyang; Khan, Shahab Ud-Din; Cheng, Yong

    2017-01-01

    Highlights: • An Obstacle Topology Partition Projection (OTPP) method of tokamak-like vessel for collision detection. • Median values preferentially of depth-first search algorithm for solving redundant inverse kinematics based on OTPP. • Application of RIK in grasping target objects. - Abstract: This paper proposed a new method for solving inverse kinematics (IK) of a redundant manipulator called EAST Articulated Maintenance Arm (EAMA), which is applied in the fusion reactor EAST (Experimental Advanced Superconducting Tokamak) and used to complete some maintenance tasks in the complex areas. However, it is difficult to realize remote control due to its redundancy, coupling structure and the complex operational environment. The IK research of the robot played a vital role to the manipulator’s motion control algorithm of remote handling (RH) technology. An Obstacle Topology Partition Projection (OTPP) approach integrated with Modified Inverse Depth First Search (MIDFS) method was presented. This is a kind of new geometric algorithm in order to solve the problem of IK for a high-redundancy manipulator. It can also be used to find a solution satisfying collision avoidance with optimal safety distance between the manipulator and obstacles. Simulations and experiments were conducted to demonstrate the efficiency and accuracy of the proposed method.

  9. Design and characterization of a multi-articulated robotic bat wing

    International Nuclear Information System (INIS)

    Bahlman, Joseph W; Swartz, Sharon M; Breuer, Kenneth S

    2013-01-01

    There are many challenges to measuring power input and force output from a flapping vertebrate. Animals can vary a multitude of kinematic parameters simultaneously, and methods for measuring power and force are either not possible in a flying vertebrate or are very time and equipment intensive. To circumvent these challenges, we constructed a robotic, multi-articulated bat wing that allows us to measure power input and force output simultaneously, across a range of kinematic parameters. The robot is modeled after the lesser dog-faced fruit bat, Cynopterus brachyotis, and contains seven joints powered by three servo motors. Collectively, this joint and motor arrangement allows the robot to vary wingbeat frequency, wingbeat amplitude, stroke plane, downstroke ratio, and wing folding. We describe the design, construction, programing, instrumentation, characterization, and analysis of the robot. We show that the kinematics, inputs, and outputs demonstrate good repeatability both within and among trials. Finally, we describe lessons about the structure of living bats learned from trying to mimic their flight in a robotic wing. (paper)

  10. Calibration of a flexible measurement system based on industrial articulated robot and structured light sensor

    Science.gov (United States)

    Mu, Nan; Wang, Kun; Xie, Zexiao; Ren, Ping

    2017-05-01

    To realize online rapid measurement for complex workpieces, a flexible measurement system based on an articulated industrial robot with a structured light sensor mounted on the end-effector is developed. A method for calibrating the system parameters is proposed in which the hand-eye transformation parameters and the robot kinematic parameters are synthesized in the calibration process. An initial hand-eye calibration is first performed using a standard sphere as the calibration target. By applying the modified complete and parametrically continuous method, we establish a synthesized kinematic model that combines the initial hand-eye transformation and distal link parameters as a whole with the sensor coordinate system as the tool frame. According to the synthesized kinematic model, an error model is constructed based on spheres' center-to-center distance errors. Consequently, the error model parameters can be identified in a calibration experiment using a three-standard-sphere target. Furthermore, the redundancy of error model parameters is eliminated to ensure the accuracy and robustness of the parameter identification. Calibration and measurement experiments are carried out based on an ER3A-C60 robot. The experimental results show that the proposed calibration method enjoys high measurement accuracy, and this efficient and flexible system is suitable for online measurement in industrial scenes.

  11. Sometimes it does hurt to ask: the constructive role of articulating impressions.

    Science.gov (United States)

    White, Lee C; Pothos, Emmanuel M; Busemeyer, Jerome R

    2014-10-01

    Decisions can sometimes have a constructive role, so that the act of, for example, choosing one option over another creates a preference for that option (e.g., Ariely & Norton, 2008; Payne, Bettman, & Johnson, 1993; Sharot, Velasquez, & Dolan, 2010; Sherman, 1980). In this work we explore the constructive role of just articulating an impression, for a presented visual stimulus, as opposed to making a choice (specifically, the judgments we employ are affective evaluations). Using quantum probability theory, we outline a cognitive model formalizing such a constructive process. We predict a simple interaction, in relation to how a second image is evaluated, following the presentation of a first image, depending on whether there is a rating for the first image or not. The interaction predicted by the quantum model was confirmed across three experiments and a variety of control manipulations. The advantages of using quantum probability theory to model the present results, compared with existing models of sequence order effects in judgment (e.g., Hogarth & Einhorn, 1992) or other theories of constructive processes when a choice is made (e.g., Festinger, 1957; Sharot et al., 2010) are discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Computer vision system R&D for EAST Articulated Maintenance Arm robot

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Linglong, E-mail: linglonglin@ipp.ac.cn; Song, Yuntao, E-mail: songyt@ipp.ac.cn; Yang, Yang, E-mail: yangy@ipp.ac.cn; Feng, Hansheng, E-mail: hsfeng@ipp.ac.cn; Cheng, Yong, E-mail: chengyong@ipp.ac.cn; Pan, Hongtao, E-mail: panht@ipp.ac.cn

    2015-11-15

    Highlights: • We discussed the image preprocessing, object detection and pose estimation algorithms under poor light condition of inner vessel of EAST tokamak. • The main pipeline, including contours detection, contours filter, MER extracted, object location and pose estimation, was carried out in detail. • The technical issues encountered during the research were discussed. - Abstract: Experimental Advanced Superconducting Tokamak (EAST) is the first full superconducting tokamak device which was constructed at Institute of Plasma Physics Chinese Academy of Sciences (ASIPP). The EAST Articulated Maintenance Arm (EAMA) robot provides the means of the in-vessel maintenance such as inspection and picking up the fragments of first wall. This paper presents a method to identify and locate the fragments semi-automatically by using the computer vision. The use of computer vision in identification and location faces some difficult challenges such as shadows, poor contrast, low illumination level, less texture and so on. The method developed in this paper enables credible identification of objects with shadows through invariant image and edge detection. The proposed algorithms are validated through our ASIPP robotics and computer vision platform (ARVP). The results show that the method can provide a 3D pose with reference to robot base so that objects with different shapes and size can be picked up successfully.

  13. Methodology for the assessment of measuring uncertainties of articulated arm coordinate measuring machines

    International Nuclear Information System (INIS)

    Romdhani, Fekria; Hennebelle, François; Ge, Min; Juillion, Patrick; Fontaine, Jean François; Coquet, Richard

    2014-01-01

    Articulated Arm Coordinate Measuring Machines (AACMMs) have gradually evolved and are increasingly used in mechanical industry. At present, measurement uncertainties relating to the use of these devices are not yet well quantified. The work carried out consists of determining the measurement uncertainties of a mechanical part by an AACMM. The studies aiming to develop a model of measurement uncertainty are based on the Monte Carlo method developed in Supplement 1 of the Guide to Expression of Uncertainty in Measurement [1] but also identifying and characterizing the main sources of uncertainty. A multi-level Monte Carlo approach principle has been developed which allows for characterizing the possible evolution of the AACMM during the measurement and quantifying in a second level the uncertainty on the considered measurand. The first Monte Carlo level is the most complex and is thus divided into three sub-levels, namely characterization on the positioning error of a point, estimation of calibration errors and evaluation of fluctuations of the ‘localization point’. The global method is thus presented and results of the first sub-level are particularly developed. The main sources of uncertainty, including AACMM deformations, are exposed. (paper)

  14. Robust intelligent sliding model control using recurrent cerebellar model articulation controller for uncertain nonlinear chaotic systems

    International Nuclear Information System (INIS)

    Peng Yafu

    2009-01-01

    In this paper, a robust intelligent sliding model control (RISMC) scheme using an adaptive recurrent cerebellar model articulation controller (RCMAC) is developed for a class of uncertain nonlinear chaotic systems. This RISMC system offers a design approach to drive the state trajectory to track a desired trajectory, and it is comprised of an adaptive RCMAC and a robust controller. The adaptive RCMAC is used to mimic an ideal sliding mode control (SMC) due to unknown system dynamics, and a robust controller is designed to recover the residual approximation error for guaranteeing the stable characteristic. Moreover, the Taylor linearization technique is employed to derive the linearized model of the RCMAC. The all adaptation laws of the RISMC system are derived based on the Lyapunov stability analysis and projection algorithm, so that the stability of the system can be guaranteed. Finally, the proposed RISMC system is applied to control a Van der Pol oscillator, a Genesio chaotic system and a Chua's chaotic circuit. The effectiveness of the proposed control scheme is verified by some simulation results with unknown system dynamics and existence of external disturbance. In addition, the advantages of the proposed RISMC are indicated in comparison with a SMC system

  15. What's in and what's out in branding? A novel articulation effect for brand names

    Science.gov (United States)

    Topolinski, Sascha; Zürn, Michael; Schneider, Iris K.

    2015-01-01

    The present approach exploits the biomechanical connection between articulation and ingestion-related mouth movements to introduce a novel psychological principle of brand name design. We constructed brand names for diverse products with consonantal stricture spots either from the front to the rear of the mouth, thus inwards (e.g., BODIKA), or from the rear to the front, thus outwards (e.g., KODIBA). These muscle dynamics resemble the oral kinematics during either ingestion (inwards), which feels positive, or expectoration (outwards), which feels negative. In 7 experiments (total N = 1261), participants liked products with inward names more than products with outward names (Experiment 1), reported higher purchase intentions (Experiment 2), and higher willingness-to-pay (Experiments 3a–3c, 4, 5), with the price gain amounting to 4–13% of the average estimated product value. These effects occurred across English and German language, under silent reading, for both edible and non-edible products, and even in the presence of a much stronger price determinant, namely fair-trade production (Experiment 5). PMID:26029136

  16. Ertapenem Articulating Spacer for the Treatment of Polymicrobial Total Knee Arthroplasty Infection

    Directory of Open Access Journals (Sweden)

    Dragan Radoicic

    2016-01-01

    Full Text Available Introduction. Periprosthetic joint infections (PJIs are the primary cause of early failure of the total knee arthroplasty (TKA. Polymicrobial TKA infections are often associated with a higher risk of treatment failure. The aim of the study was to assess the efficacy of ertapenem loaded spacers in the treatment of polymicrobial PJI. Methods. There were 18 patients enrolled; nine patients with polymicrobial PJI treated with ertapenem loaded articulating spacers were compared to the group of 9 patients treated with vancomycin or ceftazidime loaded spacers. Results. Successful reimplantation with revision implants was possible in 66.67%. Ertapenem spacers were used in 6 cases in primary two-stage procedure and in 3 cases in secondary spacer exchange. Successful infection eradication was achieved in all cases; final reimplantation with revision knee arthroplasty implants was possible in 6 cases. Conclusion. Ertapenem can be successfully used as antimicrobial addition to the cement spacers in two-stage revision treatment of polymicrobial PJIs. However, this type of spacer may also be useful in the treatment of infections caused by monomicrobial extended spectrum beta-lactamases producing gram-negative bacilli. Further clinical studies are required to evaluate the efficacy and safety of ertapenem spacers in the treatment of polymicrobial and monomicrobial PJIs.

  17. A Filtering Approach for Image-Guided Surgery With a Highly Articulated Surgical Snake Robot.

    Science.gov (United States)

    Tully, Stephen; Choset, Howie

    2016-02-01

    The objective of this paper is to introduce a probabilistic filtering approach to estimate the pose and internal shape of a highly flexible surgical snake robot during minimally invasive surgery. Our approach renders a depiction of the robot that is registered to preoperatively reconstructed organ models to produce a 3-D visualization that can be used for surgical feedback. Our filtering method estimates the robot shape using an extended Kalman filter that fuses magnetic tracker data with kinematic models that define the motion of the robot. Using Lie derivative analysis, we show that this estimation problem is observable, and thus, the shape and configuration of the robot can be successfully recovered with a sufficient number of magnetic tracker measurements. We validate this study with benchtop and in-vivo image-guidance experiments in which the surgical robot was driven along the epicardial surface of a porcine heart. This paper introduces a filtering approach for shape estimation that can be used for image guidance during minimally invasive surgery. The methods being introduced in this paper enable informative image guidance for highly articulated surgical robots, which benefits the advancement of robotic surgery.

  18. ITER Articulated Inspection Arm (AIA): Geometric calibration issues of a long-reach flexible robot

    International Nuclear Information System (INIS)

    Arhur, D.; Perrot, Y.; Bidard, C.; Friconneau, J.P.; Palmer, J.D.; Semeraro, L.

    2005-01-01

    This paper is part of the Remote Handling (RH) activities for the future fusion reactor ITER. Specifically it relates to the possibility to carry out close inspection tasks of the Vacuum Vessel first wall using a long reach robot called the 'Articulated Inspection Arm' (AIA). Early studies for this device identified the need of improving the accuracy of the end-effector position in such robot structures. Therefore, the aim of this R and D program performed under the European Fusion Development Agreement (EFDA) work program is to develop a flexible parametric model with localised compliances of an AIA-like system, in order to compensate for its flexibilities. The geometric calibration is performed using a non-linear multivariable optimisation technique, which minimizes the average error between the simulated and real robot position. The optimised set of parameters, tested on the first segment of the robot, enables to divide by 3 the error on the end-effector position, in comparison to a rigid model. We expect better prediction after mechanical improvements to reduce the serious backlash in the joints. The prediction model applied to the whole arm will enable errors to be reduced from more than 1 m, in some configurations, to a final accuracy of a few centimetres

  19. The Nature and Articulation of Ethical Codes on Tailings Management in South Africa

    Directory of Open Access Journals (Sweden)

    Tobius Thobile Poswa

    2017-10-01

    Full Text Available It is well recognized that the mining industry in South Africa is highly rated for its substantial contribution to the country’s economic growth, including employment and infrastructural development. It is also known that mining and ore processing activities potentially pose a severe threat to public health and environmental well-being, in the way operations are carried out, mine wastes are disposed of (in dumps, local communities are relocated, mine management and the mining community, in general, perceive established environmental standards and etiquette. This paper examines ethical practices and norms in the South African mining industry, with particular reference to the management of tailings dams. We analyse the modes of articulation of the country’s regulatory instruments for tailings management, and review the corporate social responsibility (CSR approach of leading mining companies. Despite decades of research and resulting recommendations on tailings management, it is concluded that the current legislations are largely ineffective, that the level of adherence by mine management and the mining community is low, and that the mechanisms for compliance monitoring is weak. New perspectives on legislative issues for unsolved problems in tailings handling are put forward, and directions for future research, indicated.

  20. The "pseudo-craniovertebral articulation" in the deep-sea fish Stomias boa (Teleostei: Stomiidae).

    Science.gov (United States)

    Schnell, Nalani K; Bernstein, Peter; Maier, Wolfgang

    2008-05-01

    Many predatory deep-sea fishes show highly specialized modifications of their feeding apparatus, e.g., elongate jaws studded with long daggerlike teeth, often combined with a very distensible stomach, to be capable of swallowing relatively large prey. These striking features can be observed in members of the marine teleost family Stomiidae. The present study gives a detailed morphological description of the mesopelagic predatory fish, Stomias boa, based on a combined approach of clearing and double staining, serial sections and dissection. In this genus, large pads made of dense connective tissue extend from the first enlarged neural arch to the ventral side of the chordal sheath, embracing the prominent exoccipitals and thus constituting a kind of double ball- and socket joint for the head. The notochordal occipito-vertebral gap is enlarged, probably not by loss of vertebral centra as is proposed for other genera of the stomiid family, e.g., in Astronesthes or Photostomias. We conclude that this "pseudo-craniovertebral articulation" serves as a functional substitute for the absent vertebrae and strengthens the flexible, anterior part of the vertebral column during extreme dorsal expansion of the gape during prey capture and swallowing. (c) 2007 Wiley-Liss, Inc.