WorldWideScience

Sample records for human nabi-hbtm description

  1. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  2. A qualitative description of human error

    International Nuclear Information System (INIS)

    Li Zhaohuan

    1992-11-01

    The human error has an important contribution to risk of reactor operation. The insight and analytical model are main parts in human reliability analysis. It consists of the concept of human error, the nature, the mechanism of generation, the classification and human performance influence factors. On the operating reactor the human error is defined as the task-human-machine mismatch. The human error event is focused on the erroneous action and the unfavored result. From the time limitation of performing a task, the operation is divided into time-limited and time-opened. The HCR (human cognitive reliability) model is suited for only time-limited. The basic cognitive process consists of the information gathering, cognition/thinking, decision making and action. The human erroneous action may be generated in any stage of this process. The more natural ways to classify human errors are presented. The human performance influence factors including personal, organizational and environmental factors are also listed

  3. A qualitative description of human error

    Energy Technology Data Exchange (ETDEWEB)

    Zhaohuan, Li [Academia Sinica, Beijing, BJ (China). Inst. of Atomic Energy

    1992-11-01

    The human error has an important contribution to risk of reactor operation. The insight and analytical model are main parts in human reliability analysis. It consists of the concept of human error, the nature, the mechanism of generation, the classification and human performance influence factors. On the operating reactor the human error is defined as the task-human-machine mismatch. The human error event is focused on the erroneous action and the unfavored result. From the time limitation of performing a task, the operation is divided into time-limited and time-opened. The HCR (human cognitive reliability) model is suited for only time-limited. The basic cognitive process consists of the information gathering, cognition/thinking, decision making and action. The human erroneous action may be generated in any stage of this process. The more natural ways to classify human errors are presented. The human performance influence factors including personal, organizational and environmental factors are also listed.

  4. Decomposing phenotype descriptions for the human skeletal phenome.

    Science.gov (United States)

    Groza, Tudor; Hunter, Jane; Zankl, Andreas

    2013-01-01

    Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. The intrinsic value and knowledge captured within such descriptions can only be expressed by taking advantage of their inner structure that implicitly combines qualities and anatomical entities. We present a meta-model (the Phenotype Fragment Ontology) and a processing pipeline that enable together the automatic decomposition and conceptualization of phenotype descriptions for the human skeletal phenome. We use this approach to showcase the usefulness of the generic concept of phenotype decomposition by performing an experimental study on all skeletal phenotype concepts defined in the Human Phenotype Ontology.

  5. Human Uniqueness, Cognition by Description, and Procedural Memory

    Directory of Open Access Journals (Sweden)

    John Bolender

    2008-06-01

    Full Text Available Evidence will be reviewed suggesting a fairly direct link between the human ability to think about entities which one has never perceived — here called “cognition by description” — and procedural memory. Cognition by description is a uniquely hominid trait which makes religion, science, and history possible. It is hypothesized that cognition by description (in the manner of Bertrand Russell’s “knowledge by description” requires variable binding, which in turn utilizes quantifier raising. Quantifier raising plausibly depends upon the computational core of language, specifically the element of it which Noam Chomsky calls “internal Merge”. Internal Merge produces hierarchical structures by means of a memory of derivational steps, a process plausibly involving procedural memory. The hypothesis is testable, predicting that procedural memory deficits will be accompanied by impairments in cognition by description. We also discuss neural mechanisms plausibly underlying procedural memory and also, by our hypothesis, cognition by description.

  6. Descriptive Analysis Of Nigerian Children Human Figure Drawings ...

    African Journals Online (AJOL)

    Art is a symbolic means of communication through which man can communicate his inner needs, desires and worries. Children find art a good means of communicating what ordinarily, they may not be able to describe orally. This study was on description of Nigerian children human figure art using Lowenfeld and Brittain ...

  7. Descriptive markup languages and the development of digital humanities

    Directory of Open Access Journals (Sweden)

    Boris Bosančić

    2012-11-01

    Full Text Available The paper discusses the role of descriptive markup languages in the development of digital humanities, a new research discipline that is part of social sciences and humanities, which focuses on the use of computers in research. A chronological review of the development of digital humanities, and then descriptive markup languages is exposed, through several developmental stages. It is shown that the development of digital humanities since the mid-1980s and the appearance of SGML, markup language that was the foundation of TEI, a key standard for the encoding and exchange of humanities texts in the digital environment, is inseparable from the development of markup languages. Special attention is dedicated to the presentation of the Text Encoding Initiative – TEI development, a key organization that developed the titled standard, both from organizational and markup perspectives. By this time, TEI standard is published in five versions, and during 2000s SGML is replaced by XML markup language. Key words: markup languages, digital humanities, text encoding, TEI, SGML, XML

  8. Impedance planimetric description of normal rectoanal motility in humans

    DEFF Research Database (Denmark)

    Andersen, Inge S; Michelsen, Hanne B; Krogh, Klaus

    2007-01-01

    PURPOSE: Manometry and pressure-volume measurements are commonly used to study anorectal physiology. However, the methods are limited by several sources of error. Recently, a new impedance planimetric system has been introduced in a porcine model. It allows simultaneous determination of anorectal...... pressures and multiple rectal luminal cross-sectional areas. This study was designed to study normal human rectoanal motility by means of impedance planimetry with multiple rectal cross-sectional areas and rectal and anal pressure. METHODS: Twelve healthy volunteers (10 females), aged 24 to 53 years, were...... the experiment, the cross-sectional area at all channels showed strong cyclic contractile activity and the anal pressure increased by approximately 100 percent. CONCLUSIONS: The new rectal impedance planimetry system allows highly detailed description of rectoanal motility patterns. It has promise as a new...

  9. Human population and activities in Forsmark. Site description

    Energy Technology Data Exchange (ETDEWEB)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced.The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations.The data in this description is essential for future evaluations of the impact on the environment and its human population (Environmental Impact Assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments.The actual area for the study is in this report called 'the Forsmark area', an area of 19.5 km{sup 2} near Forsmark nuclear power plant. The land use in the Forsmark area differs notably from the land use in Uppsala laen (laen = county). Only 0.04% of the total area is developed (built-up) compared to 4.9% in Uppsala laen and only 4% is agricultural land compared to 25% in the county. Furthermore, there are far more forest, wetlands and water areas in the Forsmark area. The forest area represents as much as 72.5% of the total area.The Forsmark area is uninhabited, and its surroundings are very sparsely populated. In 2002, the population density in Forsmark was 1.8 inhabitants per square kilometre, which was 24 times lower than in Uppsala laen. The population density in the

  10. Human population and activities in Forsmark. Site description

    International Nuclear Information System (INIS)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced.The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations.The data in this description is essential for future evaluations of the impact on the environment and its human population (Environmental Impact Assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments.The actual area for the study is in this report called 'the Forsmark area', an area of 19.5 km 2 near Forsmark nuclear power plant. The land use in the Forsmark area differs notably from the land use in Uppsala laen (laen = county). Only 0.04% of the total area is developed (built-up) compared to 4.9% in Uppsala laen and only 4% is agricultural land compared to 25% in the county. Furthermore, there are far more forest, wetlands and water areas in the Forsmark area. The forest area represents as much as 72.5% of the total area.The Forsmark area is uninhabited, and its surroundings are very sparsely populated. In 2002, the population density in Forsmark was 1.8 inhabitants per square kilometre, which was 24 times lower than in Uppsala laen. The population density in the parish has been

  11. Human population and activities at Simpevarp. Site description

    International Nuclear Information System (INIS)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced. The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations. The data in this description is essential for future evaluations of the impact on the environment and its human population (environmental impacts assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments. The actual area for the study is in this report called 'the Simpevarp area', an area of 127.0 km 2 near Oskarshamn nuclear power plant. The land use in Simpevarp area differs notably from the land use in Kalmar laen. The forest area is far more dominating in Simpevarp area than in Kalmar laen and it represents as much as 89% compared to 63% of the total area. Only 4.4% of the area is arable land compared to 11.6% in Kalmar laen and only 0.3% is of other type (wetlands, bare rock, quarries, pites etc) compared to 15.6% in the county. The main observation is that Simpevarp area is a sparsely populated area located in a relatively lightly populated county. In 2002, the population density was 7.4 inhabitants/km 2 , three times lower than in Kalmar laen. The demography statistics show

  12. Human population and activities at Simpevarp. Site description

    Energy Technology Data Exchange (ETDEWEB)

    Miliander, Sofia; Punakivi, Mari; Kylaekorpi, Lasse; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

    2004-12-01

    The Swedish Nuclear Fuel and Waste Management Co (SKB) is in the process of selecting a safe and environmentally acceptable location for a deep repository of radioactive waste. Two alternative locations are under investigation. These are Forsmark, Oesthammars kommun (kommun = municipality) and Simpevarp/Laxemar, Oskarshamns kommun. SKB has expressed the importance of describing the humans and their activities in these areas and therefore has this synthesis concerning the human population in Forsmark been produced. The description is a statistical synthesis, mainly based upon statistical data from SCB (Statistics Sweden) that has been collected, processed and analysed. The statistical data has not been verified through site inspections and interviews. When using statistical data, it is advisable to note that the data becomes more unreliable if the areas are small, with small populations. The data in this description is essential for future evaluations of the impact on the environment and its human population (environmental impacts assessments). The data is also important when modelling the potential flows of radio nuclides and calculating the risk of exposure in future safety assessments. The actual area for the study is in this report called 'the Simpevarp area', an area of 127.0 km{sup 2} near Oskarshamn nuclear power plant. The land use in Simpevarp area differs notably from the land use in Kalmar laen. The forest area is far more dominating in Simpevarp area than in Kalmar laen and it represents as much as 89% compared to 63% of the total area. Only 4.4% of the area is arable land compared to 11.6% in Kalmar laen and only 0.3% is of other type (wetlands, bare rock, quarries, pites etc) compared to 15.6% in the county. The main observation is that Simpevarp area is a sparsely populated area located in a relatively lightly populated county. In 2002, the population density was 7.4 inhabitants/km{sup 2}, three times lower than in Kalmar laen. The

  13. Human Rights under the Ethiopian Constitution: A Descriptive ...

    African Journals Online (AJOL)

    This article summarizes human rights under the Ethiopian Constitution (mainly surrounding Chapter 3 of Constitution and related constitutional provisions on human and democratic rights), and forwards some insights. It, inter alia, covers various aspects of the application and interpretation of human rights provisions, ...

  14. Stabilization process of human population: a descriptive approach.

    Science.gov (United States)

    Kayani, A K; Krotki, K J

    1981-01-01

    An attempt is made to inquire into the process of stabilization of a human population. The same age distribution distorted by past variations in fertility is subjected to several fixed schedules of fertility. The schedules are different from each other monotonically over a narrow range. The primary concern is with the process, almost year by year, through which the populations become stable. There is particular interest in the differential impact in the same original age distribution of the narrowly different fixed fertility schedules. The exercise is prepared in 3 stages: general background of the process of stabilization; methodology and data used; and analysis and discussion of the stabilization process. Among the several approaches through which the analysis of stable population is possible, 2 are popular: the integral equation and the projection matrix. In this presentation the interest is in evaluating the effects of fertility on the stabilization process of a population. Therefore, only 1 initial age distribution and only 1 life table but a variety of narrowly different schedules of fertility have been used. Specifically, the U.S. 1963 female population is treated as the initial population. The process of stabilization is viewed in the light of the changes in the slopes between 2 successive age groups of an age distribution. A high fertility schedule with the given initial age distribution and mortality level overcomes the oscillations more quickly than the low fertility schedule. Simulation confirms the intuitively expected positive relationship between the mean of the slope and the level of fertility. The variance of the slope distribution is an indicator of the aging of the distribution.

  15. Comparing the subjective task difficulty of human operators with task description levels

    International Nuclear Information System (INIS)

    Park, Jin Kyun; Jung, Won Dea; Yang, Joon Eon

    2011-01-01

    Without the loss of generality, it is reasonable to say that an operating procedure consists of many steps including detailed descriptions that provide necessary information in conducting the required tasks safely and effectively. In this regard, since it is widely perceived that procedures are effective for reducing the occurrence of human performance related problems, the use of procedures is very popular in large process control systems including nuclear power plants (NPPs), commercial airplanes and railway systems. However, the secure of an operational safety by using an operating procedure can be accomplished only if human operators are able to effectively obtain necessary information from it. In other words, it is hard to expect the reduction of human performance related problems, if task descriptions are so ambiguous or incomplete that human operators feel an undue difficulty in identifying 'what have to be done' and 'how to do it' from procedures. Unfortunately, it seems that a systematic method that can be used to distinguish the proper level of task descriptions is rare. For this reason, Park et al. developed a decision chart that could be helpful for characterizing the level of task descriptions. In this study, in order to ensure the appropriateness of the suggested decision chart, more detailed investigations were conducted with the support of human operators who are working as the operating personnel of NPPs

  16. HCIDL: Human-computer interface description language for multi-target, multimodal, plastic user interfaces

    Directory of Open Access Journals (Sweden)

    Lamia Gaouar

    2018-06-01

    Full Text Available From the human-computer interface perspectives, the challenges to be faced are related to the consideration of new, multiple interactions, and the diversity of devices. The large panel of interactions (touching, shaking, voice dictation, positioning … and the diversification of interaction devices can be seen as a factor of flexibility albeit introducing incidental complexity. Our work is part of the field of user interface description languages. After an analysis of the scientific context of our work, this paper introduces HCIDL, a modelling language staged in a model-driven engineering approach. Among the properties related to human-computer interface, our proposition is intended for modelling multi-target, multimodal, plastic interaction interfaces using user interface description languages. By combining plasticity and multimodality, HCIDL improves usability of user interfaces through adaptive behaviour by providing end-users with an interaction-set adapted to input/output of terminals and, an optimum layout. Keywords: Model driven engineering, Human-computer interface, User interface description languages, Multimodal applications, Plastic user interfaces

  17. The major histocompatibility complex and perfumers' descriptions of human body odors

    OpenAIRE

    Wedekind, C.; Escher, S.; Van de Waal, M.; Frei, E.

    2007-01-01

    The MHC (major histocompatibility complex) is a group of genes that play a crucial role in immune recognition and in tolerance of tissue grafting. The MHC has also been found to influence body odors, body odor preferences, and mate choice in mice and humans. Here we test whether verbal descriptions of human body odors can be linked to the MHC. We asked 45 male students to live as odor neutral as possible for two consecutive days and to wear a T-shirt during the nights. The odors of these T-sh...

  18. Human security from paradigm shift to operationalisation: job description for a human security worker

    NARCIS (Netherlands)

    Glasius, M.

    2008-01-01

    This article shows how human security has functioned as both a paradigm-shifting and a bridging concept, with its most significant implications being, first, the shift from a focus on state security to one on human rights, and, second, the indivisibility of physical and material security. The

  19. Supervised segmentation of phenotype descriptions for the human skeletal phenome using hybrid methods

    Directory of Open Access Journals (Sweden)

    Groza Tudor

    2012-10-01

    Full Text Available Abstract Background Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. In order to fully capture the intrinsic value and knowledge expressed within them, we need to take advantage of their inner structure, which implicitly combines qualities and anatomical entities. The first step in this process is the segmentation of the phenotype descriptions into their atomic elements. Results We present a two-phase hybrid segmentation method that combines a series individual classifiers using different aggregation schemes (set operations and simple majority voting. The approach is tested on a corpus comprised of skeletal phenotype descriptions emerged from the Human Phenotype Ontology. Experimental results show that the best hybrid method achieves an F-Score of 97.05% in the first phase and F-Scores of 97.16% / 94.50% in the second phase. Conclusions The performance of the initial segmentation of anatomical entities and qualities (phase I is not affected by the presence / absence of external resources, such as domain dictionaries. From a generic perspective, hybrid methods may not always improve the segmentation accuracy as they are heavily dependent on the goal and data characteristics.

  20. Supervised segmentation of phenotype descriptions for the human skeletal phenome using hybrid methods.

    Science.gov (United States)

    Groza, Tudor; Hunter, Jane; Zankl, Andreas

    2012-10-15

    Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. In order to fully capture the intrinsic value and knowledge expressed within them, we need to take advantage of their inner structure, which implicitly combines qualities and anatomical entities. The first step in this process is the segmentation of the phenotype descriptions into their atomic elements. We present a two-phase hybrid segmentation method that combines a series individual classifiers using different aggregation schemes (set operations and simple majority voting). The approach is tested on a corpus comprised of skeletal phenotype descriptions emerged from the Human Phenotype Ontology. Experimental results show that the best hybrid method achieves an F-Score of 97.05% in the first phase and F-Scores of 97.16% / 94.50% in the second phase. The performance of the initial segmentation of anatomical entities and qualities (phase I) is not affected by the presence / absence of external resources, such as domain dictionaries. From a generic perspective, hybrid methods may not always improve the segmentation accuracy as they are heavily dependent on the goal and data characteristics.

  1. The Major Histocompatibility Complex and Perfumers' Descriptions of Human Body Odors

    Directory of Open Access Journals (Sweden)

    Claus Wedekind

    2007-04-01

    Full Text Available The MHC (major histocompatibility complex is a group of genes that play a crucial role in immune recognition and in tolerance of tissue grafting. The MHC has also been found to influence body odors, body odor preferences, and mate choice in mice and humans. Here we test whether verbal descriptions of human body odors can be linked to the MHC. We asked 45 male students to live as odor neutral as possible for two consecutive days and to wear a T-shirt during the nights. The odors of these T-shirts were then described by five evaluators: two professional perfumers and three laymen. One of the perfumers was able to describe the T-shirt odors in such a way that some of the allelic specificity of the MHC was significantly revealed (after Bonferroni correction for multiple testing. This shows that, although difficult, some people are able to describe MHC-correlated body odor components.

  2. Strategies for human-driven robot comprehension of spatial descriptions by older adults in a robot fetch task.

    Science.gov (United States)

    Carlson, Laura; Skubic, Marjorie; Miller, Jared; Huo, Zhiyu; Alexenko, Tatiana

    2014-07-01

    This contribution presents a corpus of spatial descriptions and describes the development of a human-driven spatial language robot system for their comprehension. The domain of application is an eldercare setting in which an assistive robot is asked to "fetch" an object for an elderly resident based on a natural language spatial description given by the resident. In Part One, we describe a corpus of naturally occurring descriptions elicited from a group of older adults within a virtual 3D home that simulates the eldercare setting. We contrast descriptions elicited when participants offered descriptions to a human versus robot avatar, and under instructions to tell the addressee how to find the target versus where the target is. We summarize the key features of the spatial descriptions, including their dynamic versus static nature and the perspective adopted by the speaker. In Part Two, we discuss critical cognitive and perceptual processing capabilities necessary for the robot to establish a common ground with the human user and perform the "fetch" task. Based on the collected corpus, we focus here on resolving the perspective ambiguity and recognizing furniture items used as landmarks in the descriptions. Taken together, the work presented here offers the key building blocks of a robust system that takes as input natural spatial language descriptions and produces commands that drive the robot to successfully fetch objects within our eldercare scenario. Copyright © 2014 Cognitive Science Society, Inc.

  3. Descriptive Study of the Presentation of Human Brucellosis in Colombia (2000-2012

    Directory of Open Access Journals (Sweden)

    Patricia Lopez Guarnizo

    2014-07-01

    Full Text Available This research aims to conduct a descriptive study of the occurrence of human brucellosis in Colombia between 2000 and 2012, and, based on previous studies, to determine the prevalence and incidence of the disease, and the limitations for its timely diagnosis and recognition by the Colombian labor system. The research consisted of searching for and analyzing articles on human brucellosis published between 2000 and 2012 in Colombia. It included a phase of information gathering and unstructured interviews with representatives of brucellosis control programs and experienced professionals. We analyzed 17 studies of human brucellosis cases in personnel at risk in slaughterhouses, retailers and vaccinators for animal brucellosis programs: 10 of them reported prevalences between 0.14% and 10.4%, and seven evidenced seropositivity. Information revealed the limitations of the diagnosis, and it demonstrated the little knowledge of the medical community about this disease. In Colombia, there is no clear policy regarding this occupational zoonosis. Brucellosis is mentioned only in Decree 2566 of 2009, in which the new table of occupational diseases is established. The paper concludes that human brucellosis in Colombia is an underdiagnosed, and therefore underreported, disease since there is no mandatory reporting system on the subject.

  4. Using Specification and Description Language (SDL) for capturing and reusing human experts' knowledge

    International Nuclear Information System (INIS)

    Far, B.H.; Koono, Zenya

    1994-01-01

    Conventional knowledge engineering techniques for acquiring experts' knowledge can not produce quality knowledge due to improper knowledge documentation and informal knowledge acquisition method. We propose a new method for knowledge documentation and acquisition using Specification and Description Language (SDL). SDL is used to describe both the target system and the reasoning process. The main idea is to follow deterministic problem solving behavior of human experts and document it. Then knowledge can be extracted by comparing documents of the successive steps. This knowledge is recorded and reused in similar or novel cases. We present an implementation of this method in a tool for software design. The implemented system consists of a SDL CASE tool and an expert system for applying the design knowledge. This system serves as an experimental platform for the study of human design by simulating the design at the lowest level. However, we have found that by acquiring enough domain knowledge, this system can simulate general problem solving of human experts. (author)

  5. CSOIL 2000 an exposure model for human risk assessment of soil contamination. A model description

    NARCIS (Netherlands)

    Brand E; Otte PF; Lijzen JPA; LER

    2007-01-01

    This RIVM description of the CSOIL 2000 model deals, for the first time, with all aspects of the model. CSOIL 2000 can be used to derive intervention values. Intervention values are calculated for contaminated soil and represent a measure for determining when contaminated soil needs to be

  6. Description of Campylobacter fetus subsp. testudinum subsp. nov., isolated from humans and reptiles

    Science.gov (United States)

    A polyphasic study was undertaken to determine the taxonomic position of 13 Campylobacter fetus-like isolates from humans (n=8) and reptiles (n=5). Phenotypic characterization, Genusgenus-specific and sap insertion-PCR initially identified all human isolates as type A Campylobacter fetus. Phylogenet...

  7. Human events reference for ATHEANA (HERA) database description and preliminary user's manual

    International Nuclear Information System (INIS)

    Auflick, J.L.; Hahn, H.A.; Pond, D.J.

    1998-01-01

    The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error-forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA

  8. Human events reference for ATHEANA (HERA) database description and preliminary user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Auflick, J.L.; Hahn, H.A.; Pond, D.J.

    1998-05-27

    The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error-forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

  9. Human Events Reference for ATHEANA (HERA) Database Description and Preliminary User's Manual

    Energy Technology Data Exchange (ETDEWEB)

    Auflick, J.L.

    1999-08-12

    The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database (db) of analytical operational events, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

  10. Human Events Reference for ATHEANA (HERA) Database Description and Preliminary User's Manual

    International Nuclear Information System (INIS)

    Auflick, J.L.

    1999-01-01

    The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database (db) of analytical operational events, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA

  11. A mathematical description of nerve fiber bundle trajectories and their variability in the human retina

    NARCIS (Netherlands)

    Jansonius, N. M.; Nevalainen, J.; Selig, B.; Zangwill, L. M.; Sample, P. A.; Budde, W. M.; Jonas, J. B.; Lagreze, W. A.; Airaksinen, P. J.; Vonthein, R.; Levin, L. A.; Paetzold, J.; Schiefer, U.

    2009-01-01

    We developed a mathematical model wherein retinal nerve fiber trajectories can be described and the corresponding inter-subject variability analyzed. The model was based on traced nerve fiber bundle trajectories extracted from 55 fundus photographs of 55 human subjects. The model resembled the

  12. A Description of the Revised ATHEANA (A Technique for Human Event Analysis)

    International Nuclear Information System (INIS)

    FORESTER, JOHN A.; BLEY, DENNIS C.; COOPER, SUSANE; KOLACZKOWSKI, ALAN M.; THOMPSON, CATHERINE; RAMEY-SMITH, ANN; WREATHALL, JOHN

    2000-01-01

    This paper describes the most recent version of a human reliability analysis (HRA) method called ''A Technique for Human Event Analysis'' (ATHEANA). The new version is documented in NUREG-1624, Rev. 1 [1] and reflects improvements to the method based on comments received from a peer review that was held in 1998 (see [2] for a detailed discussion of the peer review comments) and on the results of an initial trial application of the method conducted at a nuclear power plant in 1997 (see Appendix A in [3]). A summary of the more important recommendations resulting from the peer review and trial application is provided and critical and unique aspects of the revised method are discussed

  13. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    International Nuclear Information System (INIS)

    O'Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

  14. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  15. A description of human hydatid disease in Tasmania in the post-eradication era.

    Science.gov (United States)

    O'Hern, Jennifer A; Cooley, Louise

    2013-07-22

    To describe human hydatid disease in Tasmania since 1996, the 2013 that the state was declared provisionally hydatid-free. Individuals with a new diagnosis or history of hydatid disease between January 1996 and July 2012 were identified through a number of sources including public health notifications, discharge coding from Tasmanian public hospitals, and the Royal Hobart Hospital pathology laboratory information system. Individuals were included if they fulfilled the case definition. Details regarding their diagnosis, management and risk factors were obtained by interview, review of medical notes, or both. The information was collected and analysed over a 3-month period from 30 July 2012 to 30 October 2012. Patient demographics, site of infection, details of hydatid disease management and outcomes, time and place of likely hydatid acquisition, and public health notification. Fifty-one patients were identified, of whom 41 met the case definition. Twenty-five represented new diagnoses between 1996 and 2012. Median age was 71 2013s (range, 44-99 2013s). There were 21 women and 20 men. Thirty-eight patients had hepatic disease, five of whom had at least one other site involved. Four had extra-abdominal disease. Twenty-nine patients could be assessed for possible time and place of hydatid acquisition and all had significant risk factors for hydatid acquisition before 1980. Ten of the 25 patients diagnosed between 1996 and 2012 had been notified to the Tasmanian Department of Health and Human Services. We found no evidence of transmission of hydatid disease to humans following the provisional declaration of eradication of hydatid disease.

  16. First description of Trypanosoma cruzi human infection in Esmeraldas province, Ecuador.

    Science.gov (United States)

    Guevara, Ángel; Moreira, Juan; Criollo, Hipatia; Vivero, Sandra; Racines, Marcia; Cevallos, Varsovia; Prandi, Rosanna; Caicedo, Cynthia; Robinzon, Francisco; Anselmi, Mariella

    2014-08-06

    Chagas disease was described in Ecuador in 1930 in the province of Guayas and thereafter in various provinces. Triatomine were reported in the province of Esmeraldas but no human infection has been described. Here we report the first evidence that the disease does exist in the province of Esmeraldas. In indigenous Awá communities located in the northwest jungle of the Esmeraldas province, 144 individuals were tested using ELISA and PCR for T.cruzi of which 5 (3.47%) were positive. Twenty eight triatomine were collected, 27 were Triatoma dispar and 1 Pastrongylus rufotuberculatus, T.cruzi was detected in 11 (42.3%) of 26 insects.

  17. Molecular Epidemiology of Agents of Human Chromoblastomycosis in Brazil with the Description of Two Novel Species.

    Directory of Open Access Journals (Sweden)

    Renata R Gomes

    2016-11-01

    Full Text Available The human mutilating disease chromoblastomycosis is caused by melanized members of the order Chaetothyriales. To assess population diversity among 123 clinical strains of agents of the disease in Brazil we applied sequencing of the rDNA internal transcribed spacer region, and partial cell division cycle and β-tubulin genes. Strains studied were limited to three clusters divided over the single family Herpotrichiellaceae known to comprise agents of the disease. A Fonsecaea cluster contained the most important agents, among which F. pedrosoi was prevalent with 80% of the total set of strains, followed by 13% for F. monophora, 3% for F. nubica, and a single isolate of F. pugnacius. Additional agents, among which two novel species, were located among members of the genus Rhinocladiella and Cyphellophora, with frequencies of 3% and 1%, respectively.

  18. A descriptive quantitative study on multi-ethnic patient satisfaction with nursing care measured by the Revised Humane Caring Scale.

    Science.gov (United States)

    Goh, Mien Li; Ang, Emily N K; Chan, Yiong-Huak; He, Hong-Gu; Vehviläinen-Julkunen, Katri

    2016-08-01

    To determine patients' satisfaction with nursing care during hospitalization. Limited studies reporting patients' satisfaction with quality of nursing care in Singapore. A descriptive study was conducted in a tertiary hospital in Singapore. Data were collected from 270 adult patients using the Revised Humane Caring Scale. Patients were moderately satisfied with the nursing care. There were significant differences of patients' level of satisfaction between/among socio-demographic subgroups including ethnicity, gender, reasons for admission and disciplines. Chinese patients were least satisfied with nursing care. The patients were most satisfied with 'Respecting patient's feeling' (mean=82.29, SD=14.50) and least satisfied with 'Communication and participation' (mean=62.00, SD=16.46). Our results reinforced the need to pay more attention to patient information provision and effective communication, which could improve patient satisfaction. The multi-ethnic patients valued respect as an influential attribute in quality nursing care. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Identification, characterization and description of Arcobacter faecis sp. nov., isolated from a human waste septic tank.

    Science.gov (United States)

    Whiteduck-Léveillée, Kerri; Whiteduck-Léveillée, Jenni; Cloutier, Michel; Tambong, James T; Xu, Renlin; Topp, Edward; Arts, Michael T; Chao, Jerry; Adam, Zaky; Lévesque, C André; Lapen, David R; Villemur, Richard; Khan, Izhar U H

    2016-03-01

    A study on the taxonomic classification of Arcobacter species was performed on the cultures isolated from various fecal sources where an Arcobacter strain AF1078(T) from human waste septic tank near Ottawa, Ontario, Canada was characterized using a polyphasic approach. Genetic investigations including 16S rRNA, atpA, cpn60, gyrA, gyrB and rpoB gene sequences of strain AF1078(T) are unique in comparison with other arcobacters. Phylogenetic analysis based on the 16S rRNA gene sequence revealed that the strain is most closely related to Arcobacter lanthieri and Arcobacter cibarius. Analyses of atpA, cpn60, gyrA, gyrB and rpoB gene sequences suggested that strain AF1078(T) formed a phylogenetic lineage independent of other species in the genus. Whole-genome sequence, DNA-DNA hybridization, fatty acid profile and phenotypic analysis further supported the conclusion that strain AF1078(T) represents a novel Arcobacter species, for which the name Arcobacter faecis sp. nov. is proposed, with type strain AF1078(T) (=LMG 28519(T); CCUG 66484(T)). Crown Copyright © 2015. Published by Elsevier GmbH. All rights reserved.

  20. A mathematical description of the postnatal growth of Japanese 'reference humans': Pt. 1

    International Nuclear Information System (INIS)

    Walker, J.T.

    1992-01-01

    This paper is part of a continuous effort towards developing empirical growth models that dosimetrists can use for improving radiation dose and risk estimates to humans. The approach here fits an exponential-logistic additive (ELA) growth model, containing six parameters, to Japanese lung mass data using a weighted non-linear least squares technique. The results are shown to fit the data quite well in that most empirical predictions fall within 10% of the observed values. The results also show that left and right lungs grow differently. Right lungs have larger mature masses and different specific growth rates compared with left lungs. Gender differences are also apparent. Male lungs attain a higher pubertal peak velocity (PPV) and adult mass size than female lungs, although the latter reach a PPV and adult size first. The model shows that lung growth rates in infants are two to three orders of magnitude higher than those in mature adults. The implications of these results are discussed. (author)

  1. Human serum albumin unfolding pathway upon drug binding: A thermodynamic and spectroscopic description

    International Nuclear Information System (INIS)

    Cheema, Mohammad Arif; Taboada, Pablo; Barbosa, Silvia; Juarez, Josue; Gutierrez-Pichel, Manuel; Siddiq, Mohammad; Mosquera, Victor

    2009-01-01

    The interest on phenothiazine drugs has been increased during last years due to their proved utility in the treatment of several diseases and biomolecular processes. In the present work, the binding of the amphiphilic phenothiazines promazine and thioridazine hydrochlorides to the carrier protein human serum albumin (HSA) has been examined by ζ-potential, isothermal titration calorimetry (ITC), fluorescence and circular dichorism (CD) spectroscopies, and dynamic light scattering (DLS) at physiological pH with the aim of analyzing the role of the different interactions in the drug complexation process with this protein. The ζ-potential results were used to check the existence of complexation. This is confirmed by a progressive screening of the protein charge up to a reversal point as a consequence of drug binding. On the other hand, binding causes alterations on the tertiary and secondary structures of the protein, which were observed by fluorescence and CD spectroscopies, involving a two-step, three-state transition. The thermodynamics of the binding process was derived from ITC results. The binding enthalpies were negative, which reveal the existence of electrostatic interactions between protein and drug molecules. In addition, increases in entropy are consistent with the predominance of hydrophobic interactions. Two different classes of binding sites were detected, viz. Binding to the first class of binding sites is dominated by an enthalpic contribution due to electrostatic interactions whereas binding to a second class of binding sites is dominated by hydrophobic bonding. In the light of these results, protein conformational change resembles the acid-induced denaturation of HSA with accumulation of an intermediate state. Binding isotherms were derived from microcalorimetric results by using a theoretical model based on the Langmuir isotherm. On the other hand, the population distribution of the different species in solution and their sizes were determined

  2. Human serum albumin unfolding pathway upon drug binding: A thermodynamic and spectroscopic description

    Energy Technology Data Exchange (ETDEWEB)

    Cheema, Mohammad Arif [Grupo de Fisica de Coloides y Polimeros, Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Santiago de Compostela, E-15782, Santiago de Compostela (Spain); Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Taboada, Pablo [Grupo de Fisica de Coloides y Polimeros, Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Santiago de Compostela, E-15782, Santiago de Compostela (Spain); Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan)], E-mail: pablo.taboada@usc.es; Barbosa, Silvia; Juarez, Josue; Gutierrez-Pichel, Manuel [Grupo de Fisica de Coloides y Polimeros, Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Santiago de Compostela, E-15782, Santiago de Compostela (Spain); Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Siddiq, Mohammad [Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Mosquera, Victor [Grupo de Fisica de Coloides y Polimeros, Departamento de Fisica de la Materia Condensada, Facultad de Fisica, Universidad de Santiago de Compostela, E-15782, Santiago de Compostela (Spain); Department of Chemistry, Quaid-i-Azam University, Islamabad 45320 (Pakistan)

    2009-04-15

    The interest on phenothiazine drugs has been increased during last years due to their proved utility in the treatment of several diseases and biomolecular processes. In the present work, the binding of the amphiphilic phenothiazines promazine and thioridazine hydrochlorides to the carrier protein human serum albumin (HSA) has been examined by {zeta}-potential, isothermal titration calorimetry (ITC), fluorescence and circular dichorism (CD) spectroscopies, and dynamic light scattering (DLS) at physiological pH with the aim of analyzing the role of the different interactions in the drug complexation process with this protein. The {zeta}-potential results were used to check the existence of complexation. This is confirmed by a progressive screening of the protein charge up to a reversal point as a consequence of drug binding. On the other hand, binding causes alterations on the tertiary and secondary structures of the protein, which were observed by fluorescence and CD spectroscopies, involving a two-step, three-state transition. The thermodynamics of the binding process was derived from ITC results. The binding enthalpies were negative, which reveal the existence of electrostatic interactions between protein and drug molecules. In addition, increases in entropy are consistent with the predominance of hydrophobic interactions. Two different classes of binding sites were detected, viz. Binding to the first class of binding sites is dominated by an enthalpic contribution due to electrostatic interactions whereas binding to a second class of binding sites is dominated by hydrophobic bonding. In the light of these results, protein conformational change resembles the acid-induced denaturation of HSA with accumulation of an intermediate state. Binding isotherms were derived from microcalorimetric results by using a theoretical model based on the Langmuir isotherm. On the other hand, the population distribution of the different species in solution and their sizes were

  3. Transforming growth factor-β (TGF-β) signaling in healthy human fetal skin: a descriptive study.

    Science.gov (United States)

    Walraven, M; Beelen, R H J; Ulrich, M M W

    2015-05-01

    TGF-β plays an important role in growth and development but is also involved in scarring and fibrosis. Differences for this growth factor are known between scarless fetal wound healing and adult wound healing. Nonetheless, most of the data in this area are from animal studies or in vitro studies and, thus, information about the human situation is incomplete and scarce. The aim of this study was to compare the canonical TGF-β signaling in unwounded human fetal and adult skin. Q-PCR, immunohistochemistry, Western Blot and Luminex assays were used to determine gene expression, protein levels and protein localization of components of this pathway in healthy skin. All components of the canonical TGF-β pathway were present in unwounded fetal skin. Compared to adult skin, fetal skin had differential concentrations of the TGF-β isoforms, had high levels of phosphorylated receptor-Smads, especially in the epidermis, and had low expression of several fibrosis-associated target genes. Further, the results indicated that the processes of receptor endocytosis might also differ between fetal and adult skin. This descriptive study showed that there are differences in gene expression, protein concentrations and protein localization for most components of the canonical TGF-β pathway between fetal and adult skin. The findings of this study can be a starting point for further research into the role of TGF-β signaling in scarless healing. Copyright © 2015 Japanese Society for Investigative Dermatology. Published by Elsevier Ireland Ltd. All rights reserved.

  4. Description of Dogs and Owners in Outdoor Built-Up Areas and Their More-Than-Human Issues

    Science.gov (United States)

    Gaunet, Florence; Pari-Perrin, Elodie; Bernardin, Geneviève

    2014-09-01

    Tensions are generated by the inevitable presence of dogs accompanying humans in cities. Built-up outdoor areas, spaces that are "in between" the home and dog parks, are widely frequented by dogs and their owners. The present case study, performed in Lyon (France), is the first to provide a description of these dyads in areas that vary according to terrain, district, dog legislation and use in three areas: a busy street where dogs are allowed and a park and a square where dogs are forbidden. Dog-owner profiles were identified. They adjusted their presence differently across areas and according to anthropogenic and ecological pressures, such as day of the week, time of day, weather, frequentation, and legislation. They mutually adapted their behaviors. Interactions between dogs or owners and other social agents were few; dogs primarily sniffed and urinated. There was little barking, no aggression, minor impact on the environment, and, despite instances of dogs appropriating forbidden areas and dogs off their leashes, the dogs seemed to go virtually unnoticed. The study shows how the need for more-than-human areas is evident in outdoor built-up areas (for instance, the results on types of interaction and activity across areas, absence of a leash, and appropriation of forbidden areas) as well as how the cultural and natural aspects of dogs play out. The results suggest that dog regulations should be adjusted in outdoor built-up areas and that dog parks should be developed.

  5. Confrontation (A Human Relations Training Unit and Simulation Game for Teacher and Administrators in a Multi-Ethnic Elementary and High School). Description of Teacher Inservice Education Materials.

    Science.gov (United States)

    National Education Association, Washington, DC. Project on Utilization of Inservice Education R & D Outcomes.

    The inservice teacher and administrator education program described here is intended to make teachers aware of the problems they may encounter in a multicultural, multiethnic school setting. The inservice topic is human relations, with the subject of black/white confrontation the main focus. This descriptive report provides additional information…

  6. Quantitative description of the morphology and ossification center in the axial skeleton of 20-week gestation formalin-fixed human fetuses using magnetic resonance images.

    Science.gov (United States)

    Chabert, Steren; Villalobos, Manuel; Ulloa, Patricia; Salas, Rodrigo; Tejos, Cristian; San Martin, Sebastian; Pereda, Jaime

    2012-03-01

    Human tissues are usually studied using a series of two-dimensional visualizations of in vivo or cutout specimens. However, there is no precise anatomical description of some of the processes of human fetal development. The purpose of our study is to develop a quantitative description of the normal axial skeleton by means of high-resolution three-dimensional magnetic resonance (MR) images, collected from six normal 20-week-old human fetuses fixed in formaldehyde. Fetuses were collected after spontaneous abortion and subsequently fixed with formalin. They were imaged using a 1.5 T MR scanner with an isotropic spatial resolution of 200 µm. The correct tissue discrimination between ossified and cartilaginous bones was confirmed by comparing the images achieved by MR scans and computerized axial tomographies. The vertebral column was segmented out from each image using a specially developed semi-automatic algorithm. Vertebral body dimensions and inter-vertebral distances were larger in the lumbar region, in agreement with the beginning of the ossification process from the thoracolumbar region toward the sacral and cephalic ends. In this article, we demonstrate the feasibility of using MR images to study the ossification process in formalin-fixed fetal tissues. A quantitative description of the ossification centers of vertebral bodies and arches is presented. © 2012 John Wiley & Sons, Ltd.

  7. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  8. Human Nature and the Development of Character: The Clash of Descriptive and Normative Elements in John Stuart Mill's Educational Theory.

    Science.gov (United States)

    Miller, Peter J.; Kim, Ki Su

    1988-01-01

    Discusses John Stuart Mill's belief in the development of character as a solution to social problems and a worthy educational ideal. Concludes that Mill's belief in education's power to perfect human nature through character development could not be realized within the framework of his anthropological views of human kind. (DMM)

  9. Emended description of Campylobacter sputorum and revision of its infrasubspecific (biovar) divisions, including C-sputorum biovar paraureolyticus, a urease-producing variant from cattle and humans

    DEFF Research Database (Denmark)

    On, S.L.W.; Atabay, H.I.; Corry, J.E.L.

    1998-01-01

    A polyphasic taxonomic study of 15 bovine and human strains assigned to the catalase-negative, urease-positive campylobacter (CNUPC) group identified these bacteria as a novel, ureolytic biovar of Campylobacter sputorum for which we propose the name C. sputorum bv. paraureolyticus: suitable...... should be revised to include by. sputorum for catalase-negative strains; by. fecalis for catalase-positive strains; and by. paraureolyticus for urease-positive strains. Strains classified previously as by. bubulus should be reclassified as by. sputorum. The species description of C. sputorum is revised...

  10. Physical-mathematical model for cybernetic description of the human organs with trace element concentrations as input variables

    International Nuclear Information System (INIS)

    Mihai, Maria; Popescu, I.V.

    2003-01-01

    In this paper we report a physical-mathematical model for studying the organs and humans fluids by cybernetic principle. The input variables represent the trace elements which are determined by atomic and nuclear methods of elemental analysis. We have determined the health limits between which the organs might function. (authors)

  11. Polyphasic taxonomic approach in the description of Alishewanella fetalis gen. nov., sp nov., isolated from a human foetus

    DEFF Research Database (Denmark)

    Vogel, Birte Fonnesbech; Venkateswaran, K.; Christensen, H.

    2000-01-01

    A taxonomically unique bacterium is described on the basis of a physiological and biochemical characterization, fatty acid profiling and sequence analyses of 16S rRNA and gyrase B (gyrB) genes. This non-motile, non-fermentative bacterium was isolated from a human foetus in Uppsala, Sweden...

  12. Description of Babesia duncani n.sp. (Apicomplexa: Babesiidae) from humans and its differentiation from other piroplasms.

    Science.gov (United States)

    Conrad, Patricia A; Kjemtrup, Anne M; Carreno, Ramon A; Thomford, John; Wainwright, Katlyn; Eberhard, Mark; Quick, Rob; Telford, Sam R; Herwaldt, Barbara L

    2006-06-01

    The morphologic, ultrastructural and genotypic characteristics of Babesia duncani n.sp. are described based on the characterization of two isolates (WA1, CA5) obtained from infected human patients in Washington and California. The intraerythrocytic stages of the parasite are morphologically indistinguishable from Babesia microti, which is the most commonly identified cause of human babesiosis in the USA. Intraerythrocytic trophozoites of B. duncani n.sp. are round to oval, with some piriform, ring and ameboid forms. Division occurs by intraerythrocytic schizogony, which results in the formation of merozoites in tetrads (syn. Maltese cross or quadruplet forms). The ultrastructural features of trophozoites and merozoites are similar to those described for B. microti and Theileria spp. However, intralymphocytic schizont stages characteristic of Theileria spp. have not been observed in infected humans. In phylogenetic analyses based on sequence data for the complete18S ribosomal RNA gene, B. duncani n.sp. lies in a distinct clade that includes isolates from humans, dogs and wildlife in the western United States but separate from Babesia sensu stricto, Theileria spp. and B. microti. ITS2 sequence analysis of the B. duncani n.sp. isolates (WA1, CA5) show that they are phylogenetically indistinguishable from each other and from two other human B. duncani-type parasites (CA6, WA2 clone1) but distinct from other Babesia and Theileria species sequenced. This analysis provides robust molecular support that the B. duncani n.sp. isolates are monophyletic and the same species. The morphologic characteristics together with the phylogenetic analysis of two genetic loci support the assertion that B. duncani n.sp. is a distinct species from other known Babesia spp. for which morphologic and sequence information are available.

  13. Descriptive statistics.

    Science.gov (United States)

    Nick, Todd G

    2007-01-01

    Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

  14. Human pancreatic islet transplantation: an update and description of the establishment of a pancreatic islet isolation laboratory.

    Science.gov (United States)

    Rheinheimer, Jakeline; Bauer, Andrea C; Silveiro, Sandra P; Estivalet, Aline A F; Bouças, Ana P; Rosa, Annelise R; Souza, Bianca M de; Oliveira, Fernanda S de; Cruz, Lavínia A; Brondani, Letícia A; Azevedo, Mirela J; Lemos, Natália E; Carlessi, Rodrigo; Assmann, Taís S; Gross, Jorge L; Leitão, Cristiane B; Crispim, Daisy

    2015-04-01

    Type 1 diabetes mellitus (T1DM) is associated with chronic complications that lead to high morbidity and mortality rates in young adults of productive age. Intensive insulin therapy has been able to reduce the likelihood of the development of chronic diabetes complications. However, this treatment is still associated with an increased incidence of hypoglycemia. In patients with "brittle T1DM", who have severe hypoglycemia without adrenergic symptoms (hypoglycemia unawareness), islet transplantation may be a therapeutic option to restore both insulin secretion and hypoglycemic perception. The Edmonton group demonstrated that most patients who received islet infusions from more than one donor and were treated with steroid-free immunosuppressive drugs displayed a considerable decline in the initial insulin independence rates at eight years following the transplantation, but showed permanent C-peptide secretion, which facilitated glycemic control and protected patients against hypoglycemic episodes. Recently, data published by the Collaborative Islet Transplant Registry (CITR) has revealed that approximately 50% of the patients who undergo islet transplantation are insulin independent after a 3-year follow-up. Therefore, islet transplantation is able to successfully decrease plasma glucose and HbA1c levels, the occurrence of severe hypoglycemia, and improve patient quality of life. The goal of this paper was to review the human islet isolation and transplantation processes, and to describe the establishment of a human islet isolation laboratory at the Endocrine Division of the Hospital de Clínicas de Porto Alegre - Rio Grande do Sul, Brazil.

  15. Description of a novel approach to engineer cartilage with porous bacterial nanocellulose for reconstruction of a human auricle.

    Science.gov (United States)

    Feldmann, Eva-Maria; Sundberg, J F; Bobbili, B; Schwarz, S; Gatenholm, P; Rotter, N

    2013-11-01

    In this study, we investigated the effects of human primary chondrocytes, derived from routine septorhino- and otoplasties on a novel nondegradable biomaterial. This biomaterial, porous bacterial nanocellulose, is produced by Gluconacetobacter xylinus. Porosity is generated by paraffin beads embedded during the fermentation process. Human primary chondrocytes were able to adhere to bacterial nanocellulose and produce cartilaginous matrix proteins such as aggrecan (after 14 days) and collagen type II (after 21 days) in the presence of differentiation medium. Cells were located within the pores and in a dense cell layer covering the surface of the biomaterial. Cells were able to re-differentiate, as cell shape and extra cellular matrix gene expression showed a chondrogenic phenotype in three-dimensional bacterial nanocellulose culture. Collagen type I and versican expression decreased during three-dimensional culture. Variations in pore sizes of 150-300 µm and 300-500 µm did not influence cartilaginous extra cellular matrix synthesis. Varying seeding densities from 9.95 × 10(2) to 1.99 × 10(3) cells/mm(2) and 3.98 × 10(3) cells/mm(2) did not result in differences in quality of extra cellular matrix neo-synthesis. Our results demonstrated that both nasal and auricular chondrocytes are equally suitable to synthesize new extra cellular matrix on bacterial nanocellulose. Therefore, we propose both cell sources in combination with bacterial nanocellulose as promising candidates for the special needs of auricular reconstruction.

  16. Assessment of the knowledge, attitude and practices about Human Papilloma Virus vaccine among the nurses working in a tertiary hospital in China: A cross-sectional descriptive study.

    Science.gov (United States)

    Zhang, Jun-Mei; Zhao, Qi-Mei; Zhang, Lei-Ming

    2017-02-01

    To assess the knowledge about human papilloma virus infection and vaccine, to ascertain the attitude and practices about the vaccine, and to ascertain the determinants preventing people from getting themselves vaccinated. The cross-sectional descriptive study was conducted from June to August 2015 in Henan Provincial People's Hospital, Henan, China, and comprised all the nursing staff including nursing students. A piloted semi-structured questionnaire was used for collecting data. Statistical analysis was done using SPSS 18. Of the 308 subjects, 190(61.6%) were professional nurses and 118(38.3%) were nursing students. The mean age of the nurses was 36.7±6.2 years and that of the students was 20.4±2.1 years. Overall, 254(82.5%) subjects were aware about the existence of human papilloma virus vaccine; 241(94.9%) thought that the vaccine could effectively prevent the development of cervical cancer; and 108(61.4%) were reluctant to get vaccinated because the vaccine was expensive. There is a need to address the myths and misconceptions associated with vaccines in order to improve the acceptance of human papilloma virus vaccine among them.

  17. Human-Like Behavior of Robot Arms: General Considerations and the Handwriting Task-Part I: Mathematical Description of Human-Like Motion: Distributed Positioning and Virtual Fatigue

    NARCIS (Netherlands)

    Potkonjak, V.; Tzafestas, S.; Kostic, D.; Djordjevic, G.

    2001-01-01

    This two-part paper is concerned with the analysis and achievement of human-like behavior by robot arms (manipulators). The analysis involves three issues: (i) the resolution of the inverse kinematics problem of redundant robots, (ii) the separation of the end-effector's motion into two components,

  18. Human-animal interaction as a social determinant of health: descriptive findings from the health and retirement study.

    Science.gov (United States)

    Mueller, Megan K; Gee, Nancy R; Bures, Regina M

    2018-03-09

    We focused on human-animal interaction (HAI) as an important aspect of social functioning at the individual level, framing this emerging field from a public health perspective. Using data from the Health and Retirement Study (HRS) 2012 HAI module, we describe the characteristics of pet ownership in a population of older adults, and examine the relation between pet ownership and multiple mental and physical health indicators such as health status, depression, and physical activity. Of the 1657 participants in our subsample, approximately half (51.5%) reported being pet owners; the majority owned dogs or cats, and most had only one pet. Pet ownership was significantly associated with a higher likelihood of ever having had depression, with pet owners being 1.89 times more likely to have experienced depression. However, pet ownership was not associated with having experienced depression within the last week. The findings from this study could indicate a relationship between pet ownership and depression, but it is impossible to determine the directionality of that relationship. It is possible that owning a pet may put a person at an increased risk of developing depression, or individuals who are at risk, or who have already developed depression, may acquire a pet as a way of managing their depressive symptoms. The findings of this study provide an initial step in contributing to our understanding of the relationship between companion animals and the social, physical, and mental well-being of the HRS study population. Future research should include measures of HAI in longitudinal, population-based surveys.

  19. Metaphorical descriptions of wrongdoers

    Directory of Open Access Journals (Sweden)

    Dryll Ewa Marta

    2017-10-01

    Full Text Available What is a metaphoric picture of an evil person made of? In a study devoted to the development of the ability to use metaphorical descriptions of humans, the semantic fields of four target metaphors - Human-Swamp, Human-Snake, Human-Knife, and Human-Nettle - were established and compared. Subjects (365 young adults were asked to decipher the metaphors’ meanings. The results were obtained mainly by qualitative analysis, with frequency analysis of clusters containing synonymous meanings. The results indicate that when creating imaginary characteristics of evil people, young adults seem to be more concerned about the possibility of suffering verbal harassment (most commonly: vulgarity, mockery, gossip, jeering than the threat of actual physical assault. The results may prove useful for developmental comparisons.

  20. Natural Language Description of Emotion

    Science.gov (United States)

    Kazemzadeh, Abe

    2013-01-01

    This dissertation studies how people describe emotions with language and how computers can simulate this descriptive behavior. Although many non-human animals can express their current emotions as social signals, only humans can communicate about emotions symbolically. This symbolic communication of emotion allows us to talk about emotions that we…

  1. Interactions between Activation and Repolarization Restitution Properties in the Intact Human Heart: In-Vivo Whole-Heart Data and Mathematical Description.

    Directory of Open Access Journals (Sweden)

    Michele Orini

    Full Text Available The restitution of the action potential duration (APDR and conduction velocity (CVR are mechanisms whereby cardiac excitation and repolarization adapt to changes in heart rate. They modulate the vulnerability to dangerous arrhythmia, but the mechanistic link between restitution and arrhythmogenesis remains only partially understood.This paper provides an experimental and theoretical study of repolarization and excitation restitution properties and their interactions in the intact human epicardium. The interdependence between excitation and repolarization dynamic is studied in 8 patients (14 restitution protocols, 1722 restitution curves undergoing global epicardial mapping with multi-electrode socks before open heart surgery. A mathematical description of the contribution of both repolarization and conduction dynamics to the steepness of the APDR slope is proposed.This study demonstrates that the APDR slope is a function of both activation and repolarization dynamics. At short cycle length, conduction delay significantly increases the APDR slope by interacting with the diastolic interval. As predicted by the proposed mathematical formulation, the APDR slope was more sensitive to activation time prolongation than to the simultaneous shortening of repolarization time. A steep APDR slope was frequently identified, with 61% of all cardiac sites exhibiting an APDR slope > 1, suggesting that a slope > 1 may not necessarily promote electrical instability in the human epicardium. APDR slope did not change for different activation or repolarization times, and it was not a function of local baseline APD. However, it was affected by the spatial organization of electrical excitation, suggesting that in tissue APDR is not a unique function of local electrophysiological properties. Spatial heterogeneity in both activation and repolarization restitution contributed to the increase in the modulated dispersion of repolarization, which for short cycle length was

  2. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  3. Course Descriptions in Environmental Studies Part Two: Interdisciplinary Courses.

    Science.gov (United States)

    Dunlap, Riley; And Others

    1984-01-01

    Presents descriptions (syllabi, outlines, goals) of interdisciplinary environmental studies courses. Topic areas of these courses include: environmental sociology; human ecology (politics, institutions, and the environment); humans and the environment in historical perspective; environmental management; humans, hazards, and disasters; and other…

  4. Mutations in ZIC2 in human holoprosencephaly: description of a Novel ZIC2 specific phenotype and comprehensive analysis of 157 individuals

    NARCIS (Netherlands)

    Solomon, Benjamin D.; Lacbawan, Felicitas; Mercier, Sandra; Clegg, Nancy J.; Delgado, Mauricio R.; Rosenbaum, Kenneth; Dubourg, Christèle; David, Veronique; Olney, Ann Haskins; Wehner, Lars-Erik; Hehr, Ute; Bale, Sherri; Paulussen, Aimee; Smeets, Hubert J.; Hardisty, Emily; Tylki-Szymanska, Anna; Pronicka, Ewa; Clemens, Michelle; McPherson, Elizabeth; Hennekam, Raoul C. M.; Hahn, Jin; Stashinko, Elaine; Levey, Eric; Wieczorek, Dagmar; Roeder, Elizabeth; Schell-Apacik, Chayim Can; Booth, Carol W.; Thomas, Ronald L.; Kenwrick, Sue; Cummings, Derek A. T.; Bous, Sophia M.; Keaton, Amelia; Balog, Joan Z.; Hadley, Donald; Zhou, Nan; Long, Robert; Vélez, Jorge I.; Pineda-Alvarez, Daniel E.; Odent, Sylvie; Roessler, Erich; Muenke, Maximilian

    2010-01-01

    BACKGROUND: Holoprosencephaly (HPE), the most common malformation of the human forebrain, may be due to mutations in genes associated with non-syndromic HPE. Mutations in ZIC2, located on chromosome 13q32, are a common cause of non-syndromic, non-chromosomal HPE. OBJECTIVE: To characterise genetic

  5. Meticillin-resistant Staphylococcus aureus with a novel mecA homologue in human and bovine populations in the UK and Denmark: a descriptive study.

    Science.gov (United States)

    García-Álvarez, Laura; Holden, Matthew T G; Lindsay, Heather; Webb, Cerian R; Brown, Derek F J; Curran, Martin D; Walpole, Enid; Brooks, Karen; Pickard, Derek J; Teale, Christopher; Parkhill, Julian; Bentley, Stephen D; Edwards, Giles F; Girvan, E Kirsty; Kearns, Angela M; Pichon, Bruno; Hill, Robert L R; Larsen, Anders Rhod; Skov, Robert L; Peacock, Sharon J; Maskell, Duncan J; Holmes, Mark A

    2011-08-01

    Animals can act as a reservoir and source for the emergence of novel meticillin-resistant Staphylococcus aureus (MRSA) clones in human beings. Here, we report the discovery of a strain of S aureus (LGA251) isolated from bulk milk that was phenotypically resistant to meticillin but tested negative for the mecA gene and a preliminary investigation of the extent to which such strains are present in bovine and human populations. Isolates of bovine MRSA were obtained from the Veterinary Laboratories Agency in the UK, and isolates of human MRSA were obtained from diagnostic or reference laboratories (two in the UK and one in Denmark). From these collections, we searched for mecA PCR-negative bovine and human S aureus isolates showing phenotypic meticillin resistance. We used whole-genome sequencing to establish the genetic basis for the observed antibiotic resistance. A divergent mecA homologue (mecA(LGA251)) was discovered in the LGA251 genome located in a novel staphylococcal cassette chromosome mec element, designated type-XI SCCmec. The mecA(LGA251) was 70% identical to S aureus mecA homologues and was initially detected in 15 S aureus isolates from dairy cattle in England. These isolates were from three different multilocus sequence type lineages (CC130, CC705, and ST425); spa type t843 (associated with CC130) was identified in 60% of bovine isolates. When human mecA-negative MRSA isolates were tested, the mecA(LGA251) homologue was identified in 12 of 16 isolates from Scotland, 15 of 26 from England, and 24 of 32 from Denmark. As in cows, t843 was the most common spa type detected in human beings. Although routine culture and antimicrobial susceptibility testing will identify S aureus isolates with this novel mecA homologue as meticillin resistant, present confirmatory methods will not identify them as MRSA. New diagnostic guidelines for the detection of MRSA should consider the inclusion of tests for mecA(LGA251). Department for Environment, Food and Rural Affairs

  6. Taxonogenomic description of four new Clostridium species isolated from human gut: ‘Clostridium amazonitimonense’, ‘Clostridium merdae’, ‘Clostridium massilidielmoense’ and ‘Clostridium nigeriense’

    Directory of Open Access Journals (Sweden)

    M.T. Alou

    2018-01-01

    Full Text Available Culturomics investigates microbial diversity of the human microbiome by combining diversified culture conditions, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and 16S rRNA gene identification. The present study allowed identification of four putative new Clostridium sensu stricto species: ‘Clostridium amazonitimonense’ strain LF2T, ‘Clostridium massilidielmoense’ strain MT26T, ‘Clostridium nigeriense’ strain Marseille-P2414T and ‘Clostridium merdae’ strain Marseille-P2953T, which we describe using the concept of taxonogenomics. We describe the main characteristics of each bacterium and present their complete genome sequence and annotation. Keywords: ‘Clostridium amazonitimonense’, ‘Clostridium massilidielmoense’, ‘Clostridium merdae’, ‘Clostridium nigeriense’, culturomics, emerging bacteria, human microbiota, taxonogenomics

  7. Microbial Culturomics Broadens Human Vaginal Flora Diversity: Genome Sequence and Description of Prevotella lascolaii sp. nov. Isolated from a Patient with Bacterial Vaginosis.

    Science.gov (United States)

    Diop, Khoudia; Diop, Awa; Levasseur, Anthony; Mediannikov, Oleg; Robert, Catherine; Armstrong, Nicholas; Couderc, Carine; Bretelle, Florence; Raoult, Didier; Fournier, Pierre-Edouard; Fenollar, Florence

    2018-03-01

    Microbial culturomics is a new subfield of postgenomic medicine and omics biotechnology application that has broadened our awareness on bacterial diversity of the human microbiome, including the human vaginal flora bacterial diversity. Using culturomics, a new obligate anaerobic Gram-stain-negative rod-shaped bacterium designated strain khD1 T was isolated in the vagina of a patient with bacterial vaginosis and characterized using taxonogenomics. The most abundant cellular fatty acids were C 15:0 anteiso (36%), C 16:0 (19%), and C 15:0 iso (10%). Based on an analysis of the full-length 16S rRNA gene sequences, phylogenetic analysis showed that the strain khD1 T exhibited 90% sequence similarity with Prevotella loescheii, the phylogenetically closest validated Prevotella species. With 3,763,057 bp length, the genome of strain khD1 T contained (mol%) 48.7 G + C and 3248 predicted genes, including 3194 protein-coding and 54 RNA genes. Given the phenotypical and biochemical characteristic results as well as genome sequencing, strain khD1 T is considered to represent a novel species within the genus Prevotella, for which the name Prevotella lascolaii sp. nov. is proposed. The type strain is khD1 T ( = CSUR P0109, = DSM 101754). These results show that microbial culturomics greatly improves the characterization of the human microbiome repertoire by isolating potential putative new species. Further studies will certainly clarify the microbial mechanisms of pathogenesis of these new microbes and their role in health and disease. Microbial culturomics is an important new addition to the diagnostic medicine toolbox and warrants attention in future medical, global health, and integrative biology postgraduate teaching curricula.

  8. Phylogenetic relationships among members of the Fusarium solani species complex in human infections and the descriptions of F. keratoplasticum sp. nov. and F. petroliphilum stat. nov

    DEFF Research Database (Denmark)

    Short, Dylan P.G.; O’Donnell, Kerry; Thrane, Ulf

    2013-01-01

    Fusarium species are frequently associated with mycotic keratitis and, to a lesser extent, cases of localized and disseminated infections. The Fusarium solani species complex (FSSC) is the most common group of fusaria associated with human infectious diseases. Several studies to date have revealed...... dozens of strongly supported phylogenetic species within this important evolutionary clade, though little work has been done to improve the taxonomy and understanding of the reproductive mode and phenotypes of the predominant clinically relevant species. Here we described Fusarium keratoplasticum sp. nov...

  9. The history of human-induced soil erosion: Geomorphic legacies, early descriptions and research, and the development of soil conservation—A global synopsis

    Science.gov (United States)

    Dotterweich, Markus

    2013-11-01

    This paper presents a global synopsis about the geomorphic evidence of soil erosion in humid and semihumid areas since the beginning of agriculture. Historical documents, starting from ancient records to data from the mid-twentieth century and numerous literature reviews form an extensive assortment of examples that show how soil erosion has been perceived previously by scholars, land surveyors, farmers, land owners, researchers, and policy makers. Examples have been selected from ancient Greek and Roman Times and from central Europe, southern Africa, North America, the Chinese Loess Plateau, Australia, New Zealand, and Easter Island. Furthermore, a comprehensive collection on the development of soil erosion research and soil conservation has been provided, with a particular focus on Germany and the USA. Geomorphic evidence shows that most of the agriculturally used slopes in the Old and New Worlds had already been affected by soil erosion in earlier, prehistoric times. Early descriptions of soil erosion are often very vague. With regard to the Roman Times, geomorphic evidence shows seemingly opposing results, ranging from massive devastation to landscapes remaining stable for centuries. Unfortunately, historical documentation is lacking. In the following centuries, historical records become more frequent and more precise and observations on extreme soil erosion events are prominent. Sometimes they can be clearly linked to geomorphic evidence in the field. The advent of professional soil conservation took place in the late eighteenth century. The first extensive essay on soil conservation known to the Western world was published in Germany in 1815. The rise of professional soil conservation occurred in the late nineteenth and early twentieth centuries. Soil remediation and flood prevention programs were initiated, but the long-term success of these actions remains controversial. In recent years, increasing interest is to recover any traditional knowledge of soil

  10. Interactions of mean body and local skin temperatures in the modulation of human forearm and calf blood flows: a three-dimensional description.

    Science.gov (United States)

    Caldwell, Joanne N; Matsuda-Nakamura, Mayumi; Taylor, Nigel A S

    2016-02-01

    The inter-relationships between mean body and local skin temperatures have previously been established for controlling hand and foot blood flows. Since glabrous skin contains many arteriovenous anastomoses, it was important to repeat those experiments on non-glabrous regions using the same sample and experimental conditions. Mild hypothermia (mean body temperature 31.4 °C), normothermia (control: 36.0 °C) and moderate hyperthermia (38.3 °C) were induced and clamped (climate chamber and water-perfusion garment) in eight males. Within each condition, five localised thermal treatments (5, 15, 25, 33, 40 °C) were applied to the left forearm and right calf. Steady-state forearm and calf blood flows were measured (venous occlusion plethysmography) for each of the resulting 15 combinations of clamped mean body and local skin temperatures. Under the normothermic clamp, cutaneous blood flows averaged 4.2 mL 100 mL(-1) min(-1) (±0.28: forearm) and 5.4 mL 100 mL(-1) min(-1) (±0.27: calf). When mildly hypothermic, these segments were unresponsive to localised thermal stimuli, but tracked those changes when normothermic and moderately hyperthermic. For deep-body (oesophageal) temperature elevations, forearm blood flow increased by 5.1 mL 100 mL(-1) min(-1) °C(-1) (±0.9) relative to normothermia, while the calf was much less responsive: 3.3 mL 100 mL(-1) min(-1) °C(-1) (±1.5). Three-dimensional surfaces revealed a qualitative divergence in the control of calf blood flow, with vasoconstrictor tone apparently being released more gradually. These descriptions reinforce the importance of deep-tissue temperatures in controlling cutaneous perfusion, with this modulation being non-linear at the forearm and appearing linear for the calf.

  11. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  12. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  13. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  14. NASA Constellation Program (CxP) Key Driving Requirements and Element Descriptions for International Architecture Working Group (IAWG) Functional Teams Human Transportation Cargo Transportation

    Science.gov (United States)

    Martinez, Roland M.

    2009-01-01

    The NASA Constellation uncrewed cargo mission delivers cargo to any designated location on the lunar surface (or other staging point) in a single mission. This capability is used to deliver surface infrastructure needed for lunar outpost construction, to provide periodic logistics resupply to support a continuous human lunar presence, and potentially deliver other assets to various locations.In the nominal mission mode, the Altair lunar lander is launched on Ares V into Low Earth Orbit (LEO), following a short Low Earth Orbit (LEO) loiter period, the Earth Departure Stage (EDS) performs the Trans Lunar Injection (TLI) burn and is then jettisoned. The Altair performs translunar trajectory correction maneuvers as necessary and performs the Lunar Orbit Insertion (LOI) burn. Altair then descends to the surface to land near a designated target, presumably in proximity to an Outpost location or another site of interest for exploration.Alternatively, the EDS and Altair Descent Stage could deliver assets to various staging points within their propulsive capabilities.

  15. "Breastfeeding" but not at the breast: Mothers' descriptions of providing pumped human milk to their infants via other containers and caregivers.

    Science.gov (United States)

    Felice, Julia P; Geraghty, Sheela R; Quaglieri, Caroline W; Yamada, Rei; Wong, Adriana J; Rasmussen, Kathleen M

    2017-07-01

    As pumping has become more prevalent among American women, pumped human milk (HM) is on the rise in their infants' diets in place of some or all feeding at the breast. We aimed to fill a gap in knowledge about mothers' motivations, practices and perceptions related to pumping, and about mothers' and other caregivers' motivations, practices, and perceptions related to feeding pumped HM. Results related to providing pumped HM are reported here, and results related to pumping are reported elsewhere. We conducted in-depth, semi-structured interviews among a diverse sample of mothers whose infants were fed pumped HM (n = 20), following each up to 1 year postpartum. Data were analyzed using thematic analysis with Atlas.ti. Nearly all mothers felt bottles were necessary to meet infant HM-feeding goals. Nearly all pumped HM was fed by other caregivers because mothers typically preferred and prioritized feeding at the breast for convenience and maintaining their milk supply. Infants were bottle-fed HM for several reasons that changed over time, such as mother's absence, latch difficulty, or desire to share the burden and bonding of feeding. Feeding practices differed between feeds from bottles versus at the breast; some infants were bottle-fed on schedules but fed at the breast on demand. Mothers' methods for storing, transporting, and preparing HM varied substantially and included practices associated with loss of nutrients and microbial contamination. Mothers' reasons for bottle-feeding HM may affect how much their infants are bottle-fed. Consumption of pumped HM may not provide the same benefits to infants as feeding at the breast. These findings highlight important avenues for future research into the relationships between bottle-feeding HM and infant health, growth, and developmental outcomes. © 2017 John Wiley & Sons Ltd.

  16. Towards a multiscale description of microvascular flow regulation: O2-dependent release of ATP from human erythrocytes and the distribution of ATP in capillary networks

    Directory of Open Access Journals (Sweden)

    Daniel eGoldman

    2012-07-01

    Full Text Available Integration of the numerous mechanisms that have been suggested to contribute to optimization of O2 supply to meet O2 need in skeletal muscle requires a systems biology approach which permits quantification of these physiological processes over a wide range of length scales. Here we describe two individual computational models based on in vivo and in vitro studies which, when incorporated into a single robust multiscale model, will provide information on the role of erythrocyte-released ATP in perfusion distribution in skeletal muscle under both physiological and pathophysiological conditions. Healthy human erythrocytes exposed to low O2 tension release ATP via a well characterized signaling pathway requiring activation of the G-protein, Gi, and adenylyl cyclase leading to increases in cAMP. This cAMP then activates PKA and subsequently CFTR culminating in ATP release via pannexin 1. A critical control point in this pathway is the level of cAMP which is regulated by pathway-specific phosphodiesterases. Using time constants (~100ms that are consistent with measured erythrocyte ATP release, we have constructed a dynamic model of this pathway. The model predicts levels of ATP release consistent with measurements obtained over a wide range of hemoglobin O2 saturations (sO2. The model further predicts how insulin, at concentrations found in prediabetes, enhances the activity of PDE3 and reduces intracellular cAMP levels leading to decreased low O2-induced ATP release from erythrocytes. The second model, which couples O2 and ATP transport in capillary networks, shows how intravascular ATP and the resulting conducted vasodilation are affected by local sO2, convection and ATP degradation. This model also predicts network-level effects of decreased ATP release resulting from elevated insulin levels. Taken together, these models lay the groundwork for investigating the systems biology of the regulation of microvascular perfusion distribution by

  17. Description and search labor for information retrieval

    OpenAIRE

    Warner, Julian

    2007-01-01

    Selection power is taken as the fundamental value for information retrieval systems. Selection power is regarded as produced by selection labor, which itself separates historically into description and search labor. As forms of mental labor, description and search labor participate in the conditions for labor and for mental labor. Concepts and distinctions applicable to physical and mental labor are indicated, introducing the necessity of labor for survival, the idea of technology as a human ...

  18. Phenotypic, Genotypic, and Antimicrobial Characteristics of Streptococcus halichoeri Isolates from Humans, Proposal To Rename Streptococcus halichoeri as Streptococcus halichoeri subsp. halichoeri, and Description of Streptococcus halichoeri subsp. hominis subsp. nov., a Bacterium Associated with Human Clinical Infections.

    Science.gov (United States)

    Shewmaker, P L; Whitney, A M; Humrighouse, B W

    2016-03-01

    Phenotypic, genotypic, and antimicrobial characteristics of six phenotypically distinct human clinical isolates that most closely resembled the type strain of Streptococcus halichoeri isolated from a seal are presented. Sequencing of the 16S rRNA, rpoB, sodA, and recN genes; comparative whole-genome analysis; conventional biochemical and Rapid ID 32 Strep identification methods; and antimicrobial susceptibility testing were performed on the human isolates, the type strain of S. halichoeri, and type strains of closely related species. The six human clinical isolates were biochemically indistinguishable from each other and showed 100% 16S rRNA, rpoB, sodA, and recN gene sequence similarity. Comparative 16S rRNA gene sequencing analysis revealed 98.6% similarity to S. halichoeri CCUG 48324(T), 97.9% similarity to S. canis ATCC 43496(T), and 97.8% similarity to S. ictaluri ATCC BAA-1300(T). A 3,530-bp fragment of the rpoB gene was 98.8% similar to the S. halichoeri type strain, 84.6% to the S. canis type strain, and 83.8% to the S. ictaluri type strain. The S. halichoeri type strain and the human clinical isolates were susceptible to the antimicrobials tested based on CLSI guidelines for Streptococcus species viridans group with the exception of tetracycline and erythromycin. The human isolates were phenotypically distinct from the type strain isolated from a seal; comparative whole-genome sequence analysis confirmed that the human isolates were S. halichoeri. On the basis of these results, a novel subspecies, Streptococcus halichoeri subsp. hominis, is proposed for the human isolates and Streptococcus halichoeri subsp. halichoeri is proposed for the gray seal isolates. The type strain of the novel subspecies is SS1844(T) = CCUG 67100(T) = LMG 28801(T). Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  19. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  20. Hardware description languages

    Science.gov (United States)

    Tucker, Jerry H.

    1994-01-01

    Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

  1. HMI-Design of System Solutions in Control Rooms. Description of a Working Process from a Human-Machine Perspective; MMI-design av systemloesningar i kontrollrum. Arbetsprocess foer utformning utifraan ett maenniska-maskinperspektiv

    Energy Technology Data Exchange (ETDEWEB)

    Bligaard, Lars-Ola; Andersson, Jonas; Thunberg, Anna; Osvalder, Anna-Lisa

    2008-01-15

    between operators and machines. The content can be used both for new development projects and for upgrading of already existing control room designs. The main target group for the report is the development engineers at the plant, who work close to the supplier, and the people who should plan and guide the development work in the control room. The purpose of the report is to deliver knowledge about how to consider a human-machine perspective in the development process. The report presents what is important to consider, but does not in detail show design solutions. The report is also a usable tool for those people who should do the actual screen designs, but then it should be used together with hand-book data and guide-lines referred to. The report begins with a description of basic concepts and definitions within the area of HMI. This is followed by a description of the HMI development working process. The working process includes five steps; planning, requirements, conceptual design, detailed design, and commissioning. The steps also include methodology for data collection and evaluation. Finally, the handbook also contains short summaries of the different steps in the working process, where important points to consider are brought forward

  2. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  3. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  4. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  5. Descriptive data analysis.

    Science.gov (United States)

    Thompson, Cheryl Bagley

    2009-01-01

    This 13th article of the Basics of Research series is first in a short series on statistical analysis. These articles will discuss creating your statistical analysis plan, levels of measurement, descriptive statistics, probability theory, inferential statistics, and general considerations for interpretation of the results of a statistical analysis.

  6. Osiris reactor descriptive report

    International Nuclear Information System (INIS)

    1976-03-01

    OSIRIS is a swimming pool reactor of 70 MW thermal power. Its main purpose is the irradiation of reactor materials in high neutron flux. A description is given of the air conditioning, ventilation, and radioactive gas removal system. (R.L.)

  7. Plot Description (PD)

    Science.gov (United States)

    Robert E. Keane

    2006-01-01

    The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

  8. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  9. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  10. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  11. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  12. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  13. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  14. Input description for BIOPATH

    International Nuclear Information System (INIS)

    Marklund, J.E.; Bergstroem, U.; Edlund, O.

    1980-01-01

    The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

  15. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  16. Olkiluoto site description 2006

    International Nuclear Information System (INIS)

    Andersson, J.; Ahokas, H.; Hudson, J.A.

    2007-03-01

    This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

  17. Management control system description

    Energy Technology Data Exchange (ETDEWEB)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  18. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  19. MCO Monitoring activity description

    International Nuclear Information System (INIS)

    SEXTON, R.A.

    1998-01-01

    Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description

  20. Dealing with behavioral ambiguity in textual process descriptions

    NARCIS (Netherlands)

    van der Aa, Han; Leopold, Henrik; Reijers, Hajo A.

    2016-01-01

    Textual process descriptions are widely used in organizations since they can be created and understood by virtually everyone. The inherent ambiguity of natural language, however, impedes the automated analysis of textual process descriptions. While human readers can use their context knowledge to

  1. Course Descriptions in Environmental Studies Part One: Historical Courses.

    Science.gov (United States)

    Hughes, Donald; And Others

    1984-01-01

    Presents descriptions (syllabi, outlines, goals) of selected environmental studies courses which approach the discipline from an historical and humanistic perspective. Areas explored in the courses include human ecology, American environmental history, environmental politics, and others. (JN)

  2. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  3. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  4. THULE: A detailed description

    International Nuclear Information System (INIS)

    Terry, M.J.

    1964-07-01

    This report describes the THULE scheme of lattice physics calculation which has been developed in FORTRAN for the IBM 7090. This scheme predicts the neutron flux over energy and space, for many groups and regions, together with reactivity and reaction rate edits for both a single lattice cell and a reactor core. This report describes in detail the input requirements for the THULE programme which forms the main part of the scheme. Brief descriptions of the 7090 programmes TED 6 and NOAH are included as appendices. TED 6 will produce the THULE edits from a WDSN output tape and NOAH is a version of the METHUSELAH programme which contains many of the THULE edits and will also produce input cards for THULE. (author)

  5. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    Full Text Available Taking into account the fact that, throughout history, certain artworks have been considered as “worth of watching” (according to the Greek etymon ἀξιοϑέατος / aksioteatos, preservation, or theorizing, while others were not, one is led to investigate the various types of evaluative descriptions. Those artworks that are more valuable than others, or simply valuable in themselves on the basis of rather specific features, have always represented the paradigmatic model for the evaluator, thus revealing the identitary nature of value as different from one epoch to another. Our aim has been to discern, with regard to this starting point, the way in which the process of evaluating artworks fits the general matrix of the universal theory of value, with its clearly distinguished levels of evaluation, beginning with value descriptions, continuing through the features of evaluation or abstract qualities of values extracted from these descriptions, and ending with value norms or systems of accepted generalizations in evaluation. Value standpoints in such an evaluation matrix represent dispositions or preferences in procedures, which reflect the norms or signifying concepts of the time. Corresponding procedures, or applications of the hierarchicized signification of artworks, are manifested in all known forms of artwork assessment: attribution, institutionalization, and setting of priorities in terms of exhibition, conservation, acquisition, restoration, and so on. Research in the history of European art-historical ideas has corroborated the hypothesis that, prior to the late 18th century, clear normative patterns were applied when it came to the evaluation of artworks. However, with the emergence of early Romanticism, this could no longer be done in the traditional way. Before the period in question, visual art was created (regardless of some stylistic discrepancies between individual authors and classified according to well-defined thematic

  6. Polemic and Descriptive Negations

    DEFF Research Database (Denmark)

    Horslund, Camilla Søballe

    2011-01-01

    to semantics and pragmatics, negations can be used in three different ways, which gives rise to a typology of three different types of negations: 1) the descriptive negation, 2) the polemic negation, and 3) the meta-linguistic negation (Nølke 1999, 4). This typology illuminates the fact that the negation...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...... prominence and register may either work in concert or oppose each other with respect to the cues they provide for the interpretation....

  7. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... aim of this thesis is to compare and evaluate selected rapid evaluation techniques for sensory profiling. Method variations have been suggested for evaluations in product development and quality control, and method insight is provided. The thesis includes three original studies, designed...... as a consequence of the current practices and needs faced in the industry. Study I compared applicability and validity of rapid methods across several panels of trained assessors. Two rapid approaches were introduced for the evaluation of foods. The first method, ‘Free Multiple Sorting’, allows subjects to perform...

  8. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  9. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  10. Modelling Imprecise Arguments in Description Logic

    Directory of Open Access Journals (Sweden)

    LETIA, I. A.

    2009-10-01

    Full Text Available Real arguments are a mixture of fuzzy linguistic variables and ontological knowledge. This paper focuses on modelling imprecise arguments in order to obtain a better interleaving of human and software agents argumentation, which might be proved useful for extending the number of real life argumentative-based applications. We propose Fuzzy Description Logic as the adequate technical instrumentation for filling the gap between human arguments and software agents arguments. A proof of concept scenario has been tested with the fuzzyDL reasoner.

  11. Towards reproducible descriptions of neuronal network models.

    Directory of Open Access Journals (Sweden)

    Eilen Nordlie

    2009-08-01

    Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

  12. Olkiluoto biosphere description 2006

    International Nuclear Information System (INIS)

    Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

    2007-02-01

    This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

  13. Description of nuclear properties

    International Nuclear Information System (INIS)

    Faessler, A.

    1991-01-01

    The lectures want to give a survey about new developments in the description of nuclei. In a first chapter we try to derive nuclear properties from the basis theory of quantum chromodynamics. This is not rigorously possible. There are still many cracks in the bridge between QCD and nuclear structure. The basic ingredient for nuclear structure calculations is the nucleon-nucleon interaction. We shall discuss the nucleon-nucleon interaction in a quark model. In a further chapter we discuss the way to come from a bare nucleon-nucleon interaction in free space to an effective nucleon-nucleon interaction in a limited model space for nuclear structure calculations. Such nuclear structure calculations can be done as shell model calculations. But they are due to the large number of configurations limited to light nuclei. We discuss possibilities (MONSTER and VAMPIR) to enlarge the model space for medium heavy and heavy nuclei. As the example of the low lying isovector 1 + states we discuss collective models (Bohr - Mottelson Model, interacting Boson Model) with proton and neutron degrees of freedom. The same states can also be described microscopically with the Quasi-Particle Random Phase Approximation (QRPA). We discuss the removal of spurious states in RPA. We also discuss the calculation of form factors and compare with inelastic electron scattering data. Finally we apply QRPA to the double-beta decay. Grand unified models predict, that the neutrino is identical with his antiparticle, that it has a finite mass and a weak right-handed interaction. If these properties are found the standard model of the strong and the electro-weak interaction can not be correct. Presently we can only derive from lower limits of the half lives of neutrinoless double-beta decays upper limits of the neutrino mass and of the right-handedness of the weak interaction and lower limits of the mass of the right handed heavy vector boson, if a specific grand unified model is given. (author)

  14. Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

    Directory of Open Access Journals (Sweden)

    Ida Ayu Mega Cahyani

    2018-03-01

    Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

  15. Environmental survey. Vol. 1. Description of the study and biological monitoring in humans. Description of the trace element content in blood, urine and hair of the population in the Federal Republic of Germany 1985/86; Umwelt-Survey. Bd. 1. Studienbeschreibung und humanbiologisches Monitoring. Deskription der Spurenelementgehalte in Blut, Urin und Haar der Bevoelkerung in der Bundesrepublik Deutschland 1985/86

    Energy Technology Data Exchange (ETDEWEB)

    Krause, C.; Chutsch, M.; Henke, M.; Huber, M.; Kliem, C.; Schulz, C.; Schwarz, E.

    1989-09-01

    This volume contains a description of studies under the research project entitled `Environment and Health - Measurement and Analysis of Environmental Exposure Factors in the Federal Republic of Germany 1985/86` (Environmental Survey), as well as a description of concentrations of a number of elements and some compounds in blood, urine and hair. This description represents the first of five parts of the analysis of the entire data base. The aim of this analysis was to give, as far as possible, a precise assessment of the corporal exposure to pollutants of the general population in Germany. The estimated distribution of the concentrations calculated for the study population, as well as for subpopulations classified by age, sex, community size, land, smoking habits and the consumption of fish. The descriptive part is divided by the 3 types of sample material such as blood, (morning) urine and hair. Within these groups, all analyzed elements and compounds (Al, As, Ba, Pb, B, Cd, Ca, Cu, Fe, Mg, P, Hg, Sr, Zn, creatinine, cotinine and PCP) are reported separately. A short characterization is followed by thetables giving the estimated statistical parameters such as percentile values (10, 50, 90, 95 and 98), maximum value, geometric (GM) and arithmetic (AM) mean, the standard error of AM and the sample standard deviation. Additionally, the measurements are represented in the form of histograms and scatterdiagrams. (orig./MG) With 66 figs., 167 tabs., 11 attachments. [Deutsch] Der vorliegende Berichtsband enthaelt zum einen die Studienbeschreibung des Forschungsvorhabens `Messung und Analyse von Umweltbelastungsfaktoren in der Bundesrepublik Deutschland 1985/86 - Umwelt und Gesundheit` (Umwelt-Survey) und zum anderen die Deskription der Gehalte zahlreicher Elemente und einiger Verbindungen in Blut, Urin und Haar. Die vorliegende Deskription stellt den ersten von insgesamt fuenf Auswertungsteilen des gesamten Datensatzes dar. Funktion und Zielsetzung dieses ersten

  16. Dual descriptions of supersymmetry breaking

    International Nuclear Information System (INIS)

    Intrilligator, K.; Thomas, S.

    1996-08-01

    Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

  17. Health Topic XML File Description

    Science.gov (United States)

    ... this page: https://medlineplus.gov/xmldescription.html Health Topic XML File Description: MedlinePlus To use the sharing ... information categories assigned. Example of a Full Health Topic Record A record for a MedlinePlus health topic ...

  18. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  19. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  20. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  1. Normative and descriptive rationality: from nature to artifice and back

    Science.gov (United States)

    Besold, T. R.; Uckelman, S. L.

    2018-03-01

    Rationality plays a key role in both the study of human reasoning and Artificial Intelligence (AI). Certain notions of rationality have been adopted in AI as guides for the development of intelligent machines and these notions have been given a normative function. The notions of rationality in AI are often taken to be closely related to conceptions of rationality in human contexts. In this paper, we argue that the normative role of rationality differs in the human and artificial contexts. While rationality in human-focused fields of study is normative, prescribing how humans ought to reason, the normative conception in AI is built on a notion of human rationality which is descriptive, not normative, in the human context, as AI aims at building agents which reason as humans do. In order to make this point, we review prominent notions of rationality used in psychology, cognitive science, and (the history of) philosophy, as well as in AI, and discuss some factors that contributed to rationality being assigned the differing normative statuses in the differing fields of study. We argue that while 'rationality' is a normative notion in both AI and in human reasoning, the normativity of the AI conception of 'rationality' is grounded in a descriptive account of human rationality.

  2. Porphyromonas pogonae sp. nov., an anaerobic but low concentration oxygen adapted coccobacillus isolated from lizards (Pogona vitticeps) or human clinical specimens, and emended description of the genus Porphyromonas Shah and Collins 1988.

    Science.gov (United States)

    Kawamura, Yoshiaki; Kuwabara, Saki; Kania, Stephen A; Kato, Hisayuki; Hamagishi, Manami; Fujiwara, Nagatoshi; Sato, Takuichi; Tomida, Junko; Tanaka, Kaori; Bemis, David A

    2015-03-01

    During the process of identifying a Gram-negative coccobacillus isolated from a human clinical specimen, we found that the isolate's 16S rRNA gene had very close sequence identity with that of a variant Porphyromonas isolated from polymicrobial infections in the central bearded dragon, a species of lizard [2]. The 16S rRNA gene sequences of the human isolate and of six isolates from lizards were nearly identical (99.9-100%). Phylogenetic analysis placed all of these isolates in a single phylogenetic cluster well separated from other species in the genus Porphyromonas. The closest species was Porphyromonas catoniae with 90.7-90.9% sequence identity, although there was less than 6% DNA similarity between the P. catoniae type strain and our representative isolates from lizards (PAGU 1787(T)) and human (PAGU 1776). These isolates could grow under anaerobic or microaerobic conditions (6% O2 atmosphere). The isolates were positive for catalase and very strong β-hemolytic activity, but did not show black or brown pigmentation. Biochemically, the isolates could be differentiated from closely related species by pyroglutamic acid arylamidase and glycine arylamidase activity, and some others. The fermentation products mainly included succinic acid and propionic acid. The major fatty acids detected in cells of the isolates were iso-C15:0, anteiso-C15:0, and 3OH-iso-C17:0. The G+C content was 43.0 ± 0.62 mol%. The species name Porphyromonas pogonae sp. nov. is proposed for these isolates with the type strain of PAGU 1787(T) (=MI 10-1288(T)=JCM 19732(T)=ATCC BAA-2643(T)). Copyright © 2014 Elsevier GmbH. All rights reserved.

  3. Emended description of Pasteuria nishizawae.

    Science.gov (United States)

    Noel, Gregory R; Atibalentja, N; Domier, Leslie L

    2005-07-01

    The description of the Gram-positive, obligately parasitic, mycelial and endospore-forming bacterium, Pasteuria nishizawae, is emended to include additional observations on the life cycle, host specificity and endospore morphology. The nucleotide sequence of the 16S rRNA gene is also provided.

  4. Manufacturer Usage Description Specification Implementation

    OpenAIRE

    Srinivasan, Kaushik

    2017-01-01

    Manufacturer Usage Description Specification (MUDS) is aframework under RFC development that aims to automate Internet access control rules for IoT devices . These access controls prevent malicious IoT devices from attacking other devices and also protect the IoT devices from being attacked by other devices.We are implementing this framework and trying to improve its security.

  5. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

  6. Microscopic description of nuclear reactions

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1992-01-01

    The genealogical series method has been extended to the continuous spectrum of the many-body systems. New nonlinear integral equations have been formulated to perform the microscopical description of the nuclear reactions with arbitrary number of particles. The way to solve them numerically is demonstrated

  7. Improving Published Descriptions of Germplasm.

    Science.gov (United States)

    Published descriptions of new germplasm, such as in the Journal of Plant Registrations (JPR) and, prior to mid-2007, in Crop Science, are important vehicles for allowing researchers and other interested parties to learn about such germplasm and the methods used to generate them. Launched in 2007, JP...

  8. NOAA Weather Radio - EAS Description

    Science.gov (United States)

    Non-Zero All Hazards Logo Emergency Alert Description Event Codes Fact Sheet FAQ Organization Search Search For Go NWS All NOAA Emergency Alert System (EAS) List of EAS Event Codes NWS EAS fact sheet What Management Agency (FEMA) and the NWS, implements the EAS at the federal level. The EAS is the nation's public

  9. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  10. HGVS Recommendations for the Description of Sequence Variants: 2016 Update.

    Science.gov (United States)

    den Dunnen, Johan T; Dalgleish, Raymond; Maglott, Donna R; Hart, Reece K; Greenblatt, Marc S; McGowan-Jordan, Jean; Roux, Anne-Francoise; Smith, Timothy; Antonarakis, Stylianos E; Taschner, Peter E M

    2016-06-01

    The consistent and unambiguous description of sequence variants is essential to report and exchange information on the analysis of a genome. In particular, DNA diagnostics critically depends on accurate and standardized description and sharing of the variants detected. The sequence variant nomenclature system proposed in 2000 by the Human Genome Variation Society has been widely adopted and has developed into an internationally accepted standard. The recommendations are currently commissioned through a Sequence Variant Description Working Group (SVD-WG) operating under the auspices of three international organizations: the Human Genome Variation Society (HGVS), the Human Variome Project (HVP), and the Human Genome Organization (HUGO). Requests for modifications and extensions go through the SVD-WG following a standard procedure including a community consultation step. Version numbers are assigned to the nomenclature system to allow users to specify the version used in their variant descriptions. Here, we present the current recommendations, HGVS version 15.11, and briefly summarize the changes that were made since the 2000 publication. Most focus has been on removing inconsistencies and tightening definitions allowing automatic data processing. An extensive version of the recommendations is available online, at http://www.HGVS.org/varnomen. © 2016 WILEY PERIODICALS, INC.

  11. Potenciales cerebrales relacionados con categorización lógica en humanos: estudio descriptivo y planteos experimentales Brain potentiales associated with logic categorization in humans: descriptive study and experimental issues

    Directory of Open Access Journals (Sweden)

    Angel Tabullo

    2007-12-01

    Full Text Available El presente trabajo investiga desde un abordaje "biocomportamental" aspectos electroneurofisiológicos correlativos al aprendizaje de categorías lógicas en sujetos humanos sanos. Se empleó la técnica de potenciales relacionados a eventos (PREs para registrar la actividad electrofisiológica de los sujetos durante la realización de una tarea de relaciones de equivalencia (Sidman, 1982. Como resultado, pudo observarse la siguiente sucesión temporal relacionada con los estímulos de comparación: un potencial visual temprano en la región occipital, luego un componente negativo en la región frontal y otro positivo tardío parietal. Finalmente, en sincronía con las respuestas, se obtuvo un componente negativo lateralizado en la región central. Se discute el significado funcional de los potenciales identificados, y se propone como planteo experimental examinar la correspondencia temporal de los distintos componentes PREs entre sí y con el tiempo de respuesta, como dispositivo experimental para el estudio de aspectos funcionales y estructurales del comportamiento complejo en humanos.The present work investigates electroneurophysiological aspects of logical category learning in healthy human subjects, from a biocomportamental standpoint. Event - related potentials method (ERPs was used to measure subject's electric brain activity, while performing an equivalence relations task (Sidman, 1982. As a result, the following temporal succession was observed in association with the comparison stimuli: an early visual potential in the occipital region, then a negative potential in the frontal region and a late parietal positivity. Finally, a lateralized central negativity was observed, in synchrony with the subject's answers. The functional meaning of the observed ERPs is discussed, and it is proposed to examine the correspondence between different ERP components timing and reaction times, as an experimental device for the study of functional and

  12. Human cognition

    International Nuclear Information System (INIS)

    Norman, D.A.

    1982-01-01

    The study of human cognition encompasses the study of all mental phenomena, from the receipt and interpretation of sensory information to the final control of the motor system in the performance of action. The cognitive scientist examines all intermediary processes, including thought, decision making, and memory and including the effects of motivation, states of arousal and stress, the study of language, and the effects of social factors. The field therefore ranges over an enormous territory, covering all that is known or that should be known about human behavior. It is not possible to summarize the current state of knowledge about cognition with any great confidence that we know the correct answer about any aspect of the work. Nontheless, models provide good characterizations of certain aspects of the data and situations. Even if these models should prove to be incorrect, they do provide good approximate descriptions of people's behavior in some situations, and these approximations will still apply even when the underlying theories have changed. A quick description is provided of models within a number of areas of human cognition and skill and some general theoretical frameworks with which to view human cognition. The frameworks are qualitative descriptions that provide a way to view the development of more detailed, quantitative models and, most important, a way of thinking about human performance and skill

  13. Relativistic description of atomic nuclei

    International Nuclear Information System (INIS)

    Krutov, V.A.

    1985-01-01

    Papers on the relativistic description of nuclei are reviewed. The Brown and Rho ''small'' bag'' model is accepted for hardrons. Meson exchange potentials of the nucleon-nucleon interaction have been considered. Then the transition from a system of two interacting nucleons has been performed to the relativistic nucleus description as a multinucleon system on the basis of OBEP (one-boson exchange potential). The proboem of OPEP (one-pion-exchange potential) inclusion to a relativistic scheme is discussed. Simplicity of calculations and attractiveness of the Walecka model for specific computations and calculations was noted. The relativistic model of nucleons interacting through ''effective'' scalar and vector boson fields was used in the Walacka model for describing neutronaand nuclear mater matters

  14. Data Description of a System

    Directory of Open Access Journals (Sweden)

    P. Nevriva

    1996-04-01

    Full Text Available In this paper, a brief discussion on description of process by memorized data is given. The insight into the problem can offer modified views on optimal control, on data compression at communication systems with respect to information content of message, etc.The idea of process description by memorized data with different information content will be presented here on the classical case study of optimal control: the data based control algorithm (data algorithm, DA gathers data from the controlled process and derives control signal (control from data accumulated in the data base. The implementation of the DA on the ideal computer which is not limited by its speed or capacity of memory is expected for simplicity. Accuracy of the data algorithm is then given by a-priori knowledge of the task and by information exchange between the controlled process and the computer.

  15. Continuum description for jointed media

    International Nuclear Information System (INIS)

    Thomas, R.K.

    1982-04-01

    A general three-dimensional continuum description is presented for a material containing regularly spaced and approximately parallel jointing planes within a representative elementary volume. Constitutive relationships are introduced for linear behavior of the base material and nonlinear normal and shear behavior across jointing planes. Furthermore, a fracture permeability tensor is calculated so that deformation induced alterations to the in-situ values can be measured. Examples for several strain-controlled loading paths are presented

  16. Conformal description of spinning particles

    International Nuclear Information System (INIS)

    Todorov, I.T.

    1986-01-01

    This book is an introduction to the application of the conformal group to quantum field theory of particles with spin. After an introduction to the twistor representations of the conformal group of a conformally flat space-time and twistor flag manifolds with Su(2,2) orbits the classical phase space of conformal spinning particles is described. Thereafter the twistor description of classical zero mass fields is considered together with the quantization. (HSI)

  17. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    Energy Technology Data Exchange (ETDEWEB)

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  18. A coherent description of the process of design

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    1992-01-01

    , and others. Doing so, a corresponding number of philosophical problems are solved, and the description becomes a coherent theory. The author has shown that it is possible to make a computer program for conceptual modelling based on the theory presented, and the principles of a CAD system including......A description of the creative design process is given based on Empiricism and using the theory of sets on conceptual and subconscious representations of the human mind. Definitions that are more precise are given of a number of common concepts such as association, synthesis, culture, creation, art...... the program and supporting the creative process of the designer is described....

  19. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  20. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  1. Subject categories and scope descriptions

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series. It defines the subject categories and provides the scope descriptions to be used for categorization of the nuclear literature for the preparation of INIS and ETDE input by national and regional centres. Together with the other volumes of the INIS Reference Series it defines the rules, standards and practices and provides the authorities to be used in the International Nuclear Information System and ETDE. A complete list of the volumes published in the INIS Reference Series may be found on the inside front cover of this publication. This INIS/ETDE Reference Series document is intended to serve two purposes: to define the subject scope of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE) and to define the subject classification scheme of INIS and ETDE. It is thus the guide to the inputting centres in determining which items of literature should be reported, and in determining where the full bibliographic entry and abstract of each item should be included in INIS or ETDE database. Each category is identified by a category code consisting of three alphanumeric characters. A scope description is given for each subject category. The scope of INIS is the sum of the scopes of all the categories. With most categories cross references are provided to other categories where appropriate. Cross references should be of assistance in finding the appropriate category; in fact, by indicating topics that are excluded from the category in question, the cross references help to clarify and define the scope of the category to which they are appended. A Subject Index is included as an aid to subject classifiers, but it is only an aid and not a means for subject classification. It facilitates the use of this document, but is no substitute for the description of the scope of the subject categories

  2. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  3. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  4. Quantum logical description of microsystems

    International Nuclear Information System (INIS)

    Stachow, E.-W.

    1984-01-01

    An abstract object language with respect to single microsystems and its pragmatic foundation are considered in a systematic way. The quantum physical restrictions of local operations of a speaker lead to a propositional language which, under certain conditions, can be referred to an individual microsystem. The time dependence of the propositions according to the measuring process is discussed. Finally the language is extended to a space-time description of microsystems. Hereby relativity imposes certain constraints on the validi ty regions of propositions in space-time. Via realization, the language establishes the essential features of quantum physics in Hilbert space. (author)

  5. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1994-09-01

    The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

  6. Thermodynamical description of excited nuclei

    International Nuclear Information System (INIS)

    Bonche, P.

    1989-01-01

    In heavy ion collisions it has been possible to obtain composite systems at rather high excitation energies corresponding to temperatures of several MeV. The theoretical studies of these systems are based on concepts borrowed from thermodynamics or statistical physics, such as the temperature. In these lectures, we present the concepts of statistical physics which are involved in the physics of heavy ion as they are produced nowadays in the laboratory and also during the final stage of a supernova collapse. We do not attempt to describe the reaction mechanisms which yield such nuclear systems nor their decay by evaporation or fragmentation. We shall only study their static properties. The content of these lectures is organized in four main sections. The first one gives the basic features of statistical physics and thermodynamics necessary to understand quantum mechanics at finite temperature. In the second one, we present a study of the liquid-gas phase transition in nuclear physics. A phenomenological approach of the stability of hot nuclei follows. The microscopic point of view is proposed in the third part. Starting from the basic concepts derived in the first part, it provides a description of excited or hot nuclei which confirms the qualitative results of the second part. Furthermore it gives a full description of most properties of these nuclei as a function of temperature. Finally in the last part, a microscopic derivation of the equation of state of nuclear matter is proposed to study the collapse of a supernova core

  7. Addressing the Language Description Deficit

    Directory of Open Access Journals (Sweden)

    M. Ali Bolgiin

    2010-01-01

    Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

  8. Archival Descriptions from the National Archives Catalog

    Data.gov (United States)

    National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

  9. Semantic foundation for preferential description logics

    CSIR Research Space (South Africa)

    Britz, K

    2011-12-01

    Full Text Available Description logics are a well-established family of knowledge representation formalisms in Artificial Intelligence. Enriching description logics with non-monotonic reasoning capabilities, especially preferential reasoning as developed by Lehmann...

  10. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  11. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office (''Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs

  12. High Luminosity LHC Project Description

    CERN Document Server

    Apollinari, Giorgio; Rossi, Lucio

    2014-01-01

    The High Luminosity LHC (HL-LHC) is a novel configuration of the Large Hadron Collider, aiming at increasing the luminosity by a factor five or more above the nominal LHC design, to allow increasing the integrated luminosity, in the high luminosity experiments ATLAS and CMS, from the 300 fb-1 of the LHC original design up to 3000 fb-1 or more. This paper contains a short description of the main machine parameters and of the main equipment that need to be developed and installed. The preliminary cost evaluation and the time plan are presented, too. Finally, the international collaboration that is supporting the project, the governance and the project structure are discussed, too.

  13. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Summary description

    International Nuclear Information System (INIS)

    Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.; Groh, M.R.; Gentillon, C.D.; Gilbert, B.G.; Reece, W.J.

    1990-05-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automate data base management system for storing and processing human error probability and hardware component failure rate data. The NUCLARR system software resides on an IBM (or compatible) personal microcomputer. NUCLARR can be accessed by the end user to furnish data suitable for input in human and/or hardware reliability analysis to support a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. This document Volume 1, of this series is the Summary Description, which presents an overview of the data management system, including a description of data collection, data qualification, data structure, and taxonomies. Programming activities, procedures for processing data, a user's guide, and hard copy data manual are presented in Volumes 2 through 5, NUREG/CR-4639

  14. Description of the Wellcome Trust

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    @@ Introduction The Wellcome Trust supports research of the highest quality with the aim of improving human and animal health, and our Strategic Plan provides the framework for how we intend to evolve our support to be even more effective in achieving this aim.

  15. Description of the Triton reactor

    International Nuclear Information System (INIS)

    1967-09-01

    The Triton reactor is an enriched uranium pool type reactor. It began operation in 1959, after a divergence made on the June 30 the same year. Devoted to studies of radiation protection, its core can be displaced in the longitudinal direction. The pool can be separated in two unequal compartments by a wall. The Triton core is placed in a small compartment, the Nereide core in the big compartment. A third compartment without water is called Naiade II, is separated by a concrete wall in which is made a window closed by an aluminium plate (2.50 m x 2.70 m). The Naiade II hole is useful for protection experiments using the Nereide core. After a complete refitting, the power of the triton reactor that reached progressively from 1.2 MW to 2 MW, then 3 MW has reached in August 1965 6.5 MW. The reactor has been specialized in irradiations in fix position, the core become fix, the nereide core has been hung mobile. Since it has been used for structure materials irradiation, for radioelements fabrication and fundamental research. The following descriptions are valid for the period after August 1965 [fr

  16. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  17. Probabilistic description of traffic flow

    International Nuclear Information System (INIS)

    Mahnke, R.; Kaupuzs, J.; Lubashevsky, I.

    2005-01-01

    A stochastic description of traffic flow, called probabilistic traffic flow theory, is developed. The general master equation is applied to relatively simple models to describe the formation and dissolution of traffic congestions. Our approach is mainly based on spatially homogeneous systems like periodically closed circular rings without on- and off-ramps. We consider a stochastic one-step process of growth or shrinkage of a car cluster (jam). As generalization we discuss the coexistence of several car clusters of different sizes. The basic problem is to find a physically motivated ansatz for the transition rates of the attachment and detachment of individual cars to a car cluster consistent with the empirical observations in real traffic. The emphasis is put on the analogy with first-order phase transitions and nucleation phenomena in physical systems like supersaturated vapour. The results are summarized in the flux-density relation, the so-called fundamental diagram of traffic flow, and compared with empirical data. Different regimes of traffic flow are discussed: free flow, congested mode as stop-and-go regime, and heavy viscous traffic. The traffic breakdown is studied based on the master equation as well as the Fokker-Planck approximation to calculate mean first passage times or escape rates. Generalizations are developed to allow for on-ramp effects. The calculated flux-density relation and characteristic breakdown times coincide with empirical data measured on highways. Finally, a brief summary of the stochastic cellular automata approach is given

  18. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  19. Content of system design descriptions

    International Nuclear Information System (INIS)

    1998-10-01

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective

  20. Description of color/race in Brazilian biomedical research.

    Science.gov (United States)

    Ribeiro, Teresa Veronica Catonho; Ferreira, Luzitano Brandão

    2012-01-01

    Over recent years, the terms race and ethnicity have been used to ascertain inequities in public health. However, this use depends on the quality of the data available. This study aimed to investigate the description of color/race in Brazilian scientific journals within the field of biomedicine. Descriptive study with systematic search for scientific articles in the SciELO Brazil database. A wide-ranging systematic search for original articles involving humans, published in 32 Brazilian biomedical scientific journals in the SciELO Brazil database between January and December 2008, was performed. Articles in which the race/ethnicity of the participants was identified were analyzed. In total, 1,180 articles were analyzed. The terms for describing race or ethnicity were often ambiguous and vague. Descriptions of race or ethnicity occurred in 159 articles (13.4%), but only in 42 (26.4%) was there a description of how individuals were identified. In these, race and ethnicity were used almost interchangeably and definition was according to skin color (71.4%), ancestry (19.0%) and self-definition (9.6%). Twenty-two races or ethnicities were cited, and the most common were white (37.3%), black (19.7%), mixed (12.9%), nonwhite (8.1%) and yellow (8.1%). The absence of descriptions of parameters for defining race, as well as the use of vague and ambiguous terms, may hamper and even prevent comparisons between human groups and the use of these data to ascertain inequities in healthcare.

  1. EP1000 passive plant description

    International Nuclear Information System (INIS)

    Saiu, G.

    1999-01-01

    In 1994, a group of European Utilities, together with Westinghouse and its Industrial Partner GENESI (an Italian consortium including ANSALDO and FIAT), initiated a program designated EPP (European Passive Plant) to evaluate Westinghouse Passive Nuclear Plant Technology for application in Europe. In Phase I of the European Passive Plant Program which was completed in 1996, a 1000 MWe passive plant reference design (EP1000) was established which conforms to the European Utility Requirements (EUR) and is expected to meet the European Safety Authorities requirements. Phase 2 of the program was initiated in 1997 with the objective of developing the Nuclear Island design details and performing supporting analyses to start development of Safety Case Report (SCR) for submittal to European Licensing Authorities. The first part of Phase 2, 'Design Definition' phase (Phase 2A) will be completed at the end of 1998, the main efforts being design definition of key systems and structures, development of the Nuclear Island layout, and performing preliminary safety analyses to support design efforts. The second part, 'Phase 2B', includes both the analyses and evaluations required to demonstrate the adequacy of the design, and to support the preparation of Safety Case Report. The second part of Phase 2 of the program will start at the beginning of 1999 and will be completed in the 2001. Incorporation of the EUR has been a key design requirement for the EP1000 from the beginning of the program. Detailed design solutions to meet the EUR have been defined and the safety approach has also been developed based on the EUR guidelines. This paper integrates and updates the plant description reported in the IAEA TECDOC-968. The most significant developments of the EP1000 plant design during Phase 2A of the EPP program are described and reference is made to the key design requirements set by the EUR Rev. B document. (author)

  2. Translating the human microbiome

    NARCIS (Netherlands)

    Brown, J.; Vos, de W.M.; Distefano, P.S.; Doré, J.; Huttenhower, C.; Knight, R.; Lawley, T.D.; Raes, J.; Turnbaugh, P.

    2013-01-01

    Over the past decade, an explosion of descriptive analyses from initiatives, such as the Human Microbiome Project (HMP) and the MetaHIT project, have begun to delineate the human microbiome. Inhabitants of the intestinal tract, nasal passages, oral cavities, skin, gastrointestinal tract and

  3. 40 CFR 233.11 - Program description.

    Science.gov (United States)

    2010-07-01

    ... organization and structure of the State agency (agencies) which will have responsibility for administering the... under § 233.10 shall include: (a) A description of the scope and structure of the State's program. The... will coordinate its enforcement strategy with that of the Corps and EPA; (h) A description of the...

  4. Freeform surface descriptions. Part I: Mathematical representations

    Science.gov (United States)

    Broemel, Anika; Lippmann, Uwe; Gross, Herbert

    2017-10-01

    Optical systems can benefit strongly from freeform surfaces; however, the choice of the right surface representation is not trivial and many aspects must be considered. In this work, we discuss the general approach classical globally defined representations, as well as the basic mathematics and properties of the most commonly used descriptions and present a new description developed by us for describing freeform surfaces.

  5. Promoting Shared Decision Making through Descriptive Inquiry

    Science.gov (United States)

    Seher, Rachel; Traugh, Cecelia; Cheng, Alan

    2018-01-01

    This article shows how City-As-School, a progressive public school in New York City, used descriptive inquiry to deepen shared decision making, which is a central value of the school and part of a democratic way of life. Descriptive inquiry is a democratic knowledge-making process that was developed at the Prospect School in North Bennington,…

  6. Formalizing the Problem of Music Description

    DEFF Research Database (Denmark)

    Sturm, Bob L.; Bardeli, Rolf; Langlois, Thibault

    2015-01-01

    The lack of a formalism for “the problem of music descrip- tion” results in, among other things: ambiguity in what problem a music description system must address, how it should be evaluated, what criteria define its success, and the paradox that a music description system can reproduce the “ground...

  7. Description in Literature and Other Media

    Directory of Open Access Journals (Sweden)

    Thomas Van Parys

    2009-10-01

    Full Text Available Book Review:
    Description in Literature and Other Media
    Werner Wolf & Walter Bernhart, eds., Description in Literature and Other Media. Amsterdam/New
    York: Rodopi, 2007.
    ISBN: 978-90-420-2310-9

  8. UO3 plant turnover - facility description document

    International Nuclear Information System (INIS)

    Clapp, D.A.

    1995-01-01

    This document was developed to provide a facility description for those portions of the UO 3 Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI

  9. 4 CFR 202.1 - Description.

    Science.gov (United States)

    2010-01-01

    ... further encircled by a ring bearing the gold-colored words “RECOVERY ACCOUNTABILITY AND TRANSPARENCY... 4 Accounts 1 2010-01-01 2010-01-01 false Description. 202.1 Section 202.1 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.1 Description. (a) The official seal of the Recovery...

  10. A DESCRIPTION OF BUFO PARDALIS TADPOLES (ANURA ...

    African Journals Online (AJOL)

    Tadpoles of Bufo parda/is Hewitt from Kei Road, Cape Province, are described. INTRODUCTION. Although tadpoles of B. pardalis have been included in Van Dijk's (1971) key to the genus Bufa, no adequate description of this taxon has yet been published. Further studies on variability depend upon a complete description ...

  11. Waste Management System Description Document (WMSD)

    International Nuclear Information System (INIS)

    1992-02-01

    This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

  12. Audio Description as a Pedagogical Tool

    Directory of Open Access Journals (Sweden)

    Georgina Kleege

    2015-05-01

    Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

  13. Pairwise Trajectory Management (PTM): Concept Description and Documentation

    Science.gov (United States)

    Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

    2018-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

  14. Problem of identifying an object in a robotics scene from an imprecise verbal description

    Energy Technology Data Exchange (ETDEWEB)

    Farreny, H; Prade, H

    1983-01-01

    The authors investigate the problem of relating imprecise and incomplete verbal descriptions to noisy high-level features supplied by an image analyzer. Pattern-matching problems are specially addressed. The proposed approach allows the direct processing of human-like descriptions. Moreover, the imprecision due to the use of natural language expressions or to the noisiness of the image analyzer, is taken into account. 26 references.

  15. The transportation operations system: A description

    International Nuclear Information System (INIS)

    Best, R.E.; Danese, F.L.; Dixon, L.D.; Peterson, R.W.; Pope, R.B.

    1990-01-01

    This paper presents a description of the system for transporting radioactive waste that may be deployed to accomplish the assigned system mission, which includes accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste generator sites and transporting them to the FWMS destination facilities. The system description presented here contains, in part, irradiated fuel and waste casks, ancillary equipments, truck, rail, and barge transporters, cask and vehicle traffic management organizations, maintenance facilities, and other operations elements. The description is for a fully implemented system, which is not expected to be achieved, however, until several years after initial operations. 6 figs

  16. Crosswalking EAD: Collaboration in Archival Description

    Directory of Open Access Journals (Sweden)

    Amy McCrory

    2005-09-01

    Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

  17. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  18. 1995 Baseline solid waste management system description

    International Nuclear Information System (INIS)

    Anderson, G.S.; Konynenbelt, H.S.

    1995-09-01

    This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

  19. Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

    Science.gov (United States)

    Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

    2016-09-01

    Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

  20. Scripps Sediment Description File- OCSEAP Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

  1. Reachability modules for the description logic SRIQ

    CSIR Research Space (South Africa)

    Nortje, R

    2013-12-01

    Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

  2. SIO Ferromanganese Nodule Description file - IDOE Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples related to ferromanganese deposits, funded through the International Decade of...

  3. Quantum State Description Complexity (Invited Talk)

    OpenAIRE

    Vazirani, Umesh V.

    2011-01-01

    Quantum states generally require exponential sized classical descriptions, but the long conjectured area law provides hope that a large class of natural quantum states can be described succinctly. Recent progress in formally proving the area law is described.

  4. Integrated Visualisation and Description of Complex Systems

    National Research Council Canada - National Science Library

    Goodburn, D

    1999-01-01

    .... Guided by a conceptual model of a description process that is driven by user information needs within a domain context, the approach incorporates the use of novel visualization techniques based...

  5. Mining skeletal phenotype descriptions from scientific literature.

    Directory of Open Access Journals (Sweden)

    Tudor Groza

    Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

  6. Description of Sizewell B nuclear power plant

    International Nuclear Information System (INIS)

    Meyer, G.; Stokke, E.

    1997-09-01

    The intention of this report is to present a condensed technical description of Sizewell B in a language understandable to non-technical personnel. It is unavoidable that some parts will be less precise than the technically initiated would like to see, but hopefully the content still give a realistic picture of Sizewell B. The technical description is based on publicly available material, of which the Sizewell B safety report has been particularly useful. Nearly all figures and drawings found in this description are reproductions of corresponding material in the safety report. To keep the description from becoming too voluminous it has been necessary to condense some background material down to a small volume. Hopefully this has not introduced any errors or inaccuracies, possible oversimplification at certain points must be weighed against the wish to cover most of the topics in the agreed table of contents for these NKS reports. (au)

  7. Deep hierarchical attention network for video description

    Science.gov (United States)

    Li, Shuohao; Tang, Min; Zhang, Jun

    2018-03-01

    Pairing video to natural language description remains a challenge in computer vision and machine translation. Inspired by image description, which uses an encoder-decoder model for reducing visual scene into a single sentence, we propose a deep hierarchical attention network for video description. The proposed model uses convolutional neural network (CNN) and bidirectional LSTM network as encoders while a hierarchical attention network is used as the decoder. Compared to encoder-decoder models used in video description, the bidirectional LSTM network can capture the temporal structure among video frames. Moreover, the hierarchical attention network has an advantage over single-layer attention network on global context modeling. To make a fair comparison with other methods, we evaluate the proposed architecture with different types of CNN structures and decoders. Experimental results on the standard datasets show that our model has a more superior performance than the state-of-the-art techniques.

  8. An Application for Descriptive Nearness: Iris Recognition

    Directory of Open Access Journals (Sweden)

    Polat Kadirhan

    2017-12-01

    Full Text Available Near Set Theory has various applications in the literature. In this paper, using the concept descriptive nearness, we show how to perform iris recognition. This process has a few algorithms given via Mathematica Script Language.

  9. Defeasible inheritance-based description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-01-01

    Full Text Available of Artificial Intelligence Research 2013 Defeasible Inheritance-based Description Logics Giovanni Casini GCASINI@CSIR.CO.ZA Centre for Artificial Intelligence Research (CAIR), CSIR Meraka Institute and UKZN, South Africa Umberto Straccia UMBERTO...

  10. 49 CFR 587.6 - General description.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Side Impact Moving Deformable Barrier § 587.6 General description. (a) The moving deformable barrier consists of component parts and...

  11. Nonminimal description of spin 3/2

    International Nuclear Information System (INIS)

    Tybor, W.

    1988-01-01

    The nonminimal description (with the help of the antisymmetric tensor-bispinor) of the spin 3/2, equivalent to the Rarita-Schwinger theory, is given. The variational principle is formulated. 5 refs. (author)

  12. Towards practical defeasible reasoning for description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-07-01

    Full Text Available The formalisation of defeasible reasoning in automated systems is becoming increasingly important. Description Logics (DLs) are nowadays the main logical formalism in the field of formal ontologies. Our focus in this paper is to devise a practical...

  13. Site descriptive modelling - strategy for integrated evaluation

    International Nuclear Information System (INIS)

    Andersson, Johan

    2003-02-01

    The current document establishes the strategy to be used for achieving sufficient integration between disciplines in producing Site Descriptive Models during the Site Investigation stage. The Site Descriptive Model should be a multidisciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using site investigation data from deep bore holes and from the surface as input. The modelling comprise the following iterative steps, evaluation of primary data, descriptive and quantitative modelling (in 3D), overall confidence evaluation. Data are first evaluated within each discipline and then the evaluations are checked between the disciplines. Three-dimensional modelling (i.e. estimating the distribution of parameter values in space and its uncertainty) is made in a sequence, where the geometrical framework is taken from the geological model and in turn used by the rock mechanics, thermal and hydrogeological modelling etc. The three-dimensional description should present the parameters with their spatial variability over a relevant and specified scale, with the uncertainty included in this description. Different alternative descriptions may be required. After the individual discipline modelling and uncertainty assessment a phase of overall confidence evaluation follows. Relevant parts of the different modelling teams assess the suggested uncertainties and evaluate the feedback. These discussions should assess overall confidence by, checking that all relevant data are used, checking that information in past model versions is considered, checking that the different kinds of uncertainty are addressed, checking if suggested alternatives make sense and if there is potential for additional alternatives, and by discussing, if appropriate, how additional measurements (i.e. more data) would affect confidence. The findings as well as the modelling results are to be documented in a Site Description

  14. Effective Conformal Descriptions of Black Hole Entropy

    Directory of Open Access Journals (Sweden)

    Steven Carlip

    2011-07-01

    Full Text Available It is no longer considered surprising that black holes have temperatures and entropies. What remains surprising, though, is the universality of these thermodynamic properties: their exceptionally simple and general form, and the fact that they can be derived from many very different descriptions of the underlying microscopic degrees of freedom. I review the proposal that this universality arises from an approximate conformal symmetry, which permits an effective “conformal dual” description that is largely independent of the microscopic details.

  15. Description of hadrons using string theory

    International Nuclear Information System (INIS)

    Sugimoto, Shigeki

    2013-01-01

    We give a brief overview of 'holographic QCD' for JPS members. Applying the idea of gauge/string duality to QCD, We obtain a description of hadrons based on string theory. Using this description, a lot of properties of hadrons can be analyzed and the results are in reasonable agreement with the observations. We try to explain the basic idea and some of the interesting results in a way accessible to non-experts. (author)

  16. Description of Measurements on Biogas Stations

    Directory of Open Access Journals (Sweden)

    Ladislav Novosád

    2016-08-01

    Full Text Available This paper focuses mainly on performance analysis for three biogas stations situated within the territory of the Czech Republic. This paper contains basic details of the individual biogas stations as well as description of their types. It also refers to the general description of the measurement gauge involved, with specifications of its potential use. The final part of this paper deals with the analysis of course data obtained, with special regard to voltage, current, active power and reactive power data.

  17. System Design Description for the TMAD Code

    International Nuclear Information System (INIS)

    Finfrock, S.H.

    1995-01-01

    This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System

  18. Qualitative Descriptive Methods in Health Science Research.

    Science.gov (United States)

    Colorafi, Karen Jiggins; Evans, Bronwynne

    2016-07-01

    The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

  19. Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

    Directory of Open Access Journals (Sweden)

    جواد رنجبر

    2009-12-01

    Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

  20. Qualitative and quantitative descriptions of glenohumeral motion.

    Science.gov (United States)

    Hill, A M; Bull, A M J; Wallace, A L; Johnson, G R

    2008-02-01

    Joint modelling plays an important role in qualitative and quantitative descriptions of both normal and abnormal joints, as well as predicting outcomes of alterations to joints in orthopaedic practice and research. Contemporary efforts in modelling have focussed upon the major articulations of the lower limb. Well-constrained arthrokinematics can form the basis of manageable kinetic and dynamic mathematical predictions. In order to contain computation of shoulder complex modelling, glenohumeral joint representations in both limited and complete shoulder girdle models have undergone a generic simplification. As such, glenohumeral joint models are often based upon kinematic descriptions of inadequate degrees of freedom (DOF) for clinical purposes and applications. Qualitative descriptions of glenohumeral motion range from the parody of a hinge joint to the complex realism of a spatial joint. In developing a model, a clear idea of intention is required in order to achieve a required application. Clinical applicability of a model requires both descriptive and predictive output potentials, and as such, a high level of validation is required. Without sufficient appreciation of the clinical intention of the arthrokinematic foundation to a model, error is all too easily introduced. Mathematical description of joint motion serves to quantify all relevant clinical parameters. Commonly, both the Euler angle and helical (screw) axis methods have been applied to the glenohumeral joint, although concordance between these methods and classical anatomical appreciation of joint motion is limited, resulting in miscommunication between clinician and engineer. Compounding these inconsistencies in motion quantification is gimbal lock and sequence dependency.

  1. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  2. An object model for beamline descriptions

    International Nuclear Information System (INIS)

    Hill, B.W.; Martono, H.; Gillespie, J.S.

    1997-01-01

    Translation of beamline model descriptions between different accelerator codes presents a unique challenge due to the different representations used for various elements and subsystems. These differences range from simple units conversions to more complex translations involving multiple beamline components. A representation of basic accelerator components is being developed in order to define a meta-structure from which beamline models, in different codes, can be described and to facilitate the translation of models between these codes. Sublines of basic components will be used to represent more complex beamline descriptions and bridge the gap between codes which may represent a beamline element as a single entity, and those which use multiple elements to describe the same physical device. A C++ object model for supporting this beamline description and a grammar for describing beamlines in terms of these components is being developed. The object model will support a common graphic user interface and translation filters for representing native beamline descriptions for a variety of accelerator codes. An overview of our work on the object model for beamline descriptions is presented here. copyright 1997 American Institute of Physics

  3. Human Resource Management in Virtual Organizations. Research in Human Resource Management Series.

    Science.gov (United States)

    Heneman, Robert L., Ed.; Greenberger, David B., Ed.

    This document contains 14 papers on human resources (HR) and human resource management (HRM) in virtual organizations. The following papers are included: "Series Preface" (Rodger Griffeth); "Volume Preface" (Robert L. Heneman, David B. Greenberger); "The Virtual Organization: Definition, Description, and…

  4. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  5. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  6. Effective fluid description of the dark universe

    Directory of Open Access Journals (Sweden)

    M. Cadoni

    2018-01-01

    Full Text Available We propose an effective anisotropic fluid description for a generic infrared-modified theory of gravity. In our framework, the additional component of the acceleration, commonly attributed to dark matter, is explained as a radial pressure generated by the reaction of the dark energy fluid to the presence of baryonic matter. Using quite general assumptions, and a microscopic description of the fluid in terms of a Bose–Einstein condensate of gravitons, we find the static, spherically symmetric solution for the metric in terms of the Misner–Sharp mass function and the fluid pressure. At galactic scales, we correctly reproduce the leading MOND-like log⁡(r and subleading (1/rlog⁡(r terms in the weak-field expansion of the potential. Our description also predicts a tiny (of order 10−6 for a typical spiral galaxy Machian modification of the Newtonian potential at galactic scales, which is controlled by the cosmological acceleration.

  7. Description of textures by a structural analysis.

    Science.gov (United States)

    Tomita, F; Shirai, Y; Tsuji, S

    1982-02-01

    A structural analysis system for describing natural textures is introduced. The analyzer automatically extracts the texture elements in an input image, measures their properties, classifies them into some distinctive classes (one ``ground'' class and some ``figure'' classes), and computes the distributions of the gray level, the shape, and the placement of the texture elements in each class. These descriptions are used for classification of texture images. An analysis-by-synthesis method for evaluating texture analyzers is also presented. We propose a synthesizer which generates a texture image based on the descriptions. By comparing the reconstructed image with the original one, we can see what information is preserved and what is lost in the descriptions.

  8. CORECOOL, model description of the programme

    International Nuclear Information System (INIS)

    Andersen, J.G.M.; Abel-Larsen, H.

    1978-11-01

    CORECOOL, Convection and Radiation Emergency Cooling, is a model for the two-phase flow and heat transfer in a fuel element during the core heat-up phase following a loss of coolant accident. The model for the two-phase flow is based on a solution of the conservation equations with a separate description of the two phases and thermodynamic non-equilibrium. The flow-regimes considered are drop flow and film flow. The heat transfer consists of convection, sputtering and radiation heat transfer. The documentation of CORECOOL consists of four parts: I) model description, II) programme description (COMMERCIAL), III) users guide (COMMERCIAL) IV) verification (COMMERCIAL). CORECOOL is a joint project between Risoe National Laboratory Denmark and General Electric Company, San Jose, USA. (author)

  9. Fusion Engineering Device. Volume II. Design description

    International Nuclear Information System (INIS)

    1981-10-01

    This volume summarizes the design of the FED. It includes a description of the major systems and subsystems, the supporting plasma design analysis, a projected device cost and associated construction schedule, and a description of the facilities to house and support the device. This effort represents the culmination of the FY81 studies conducted at the Fusion Engineering Design Center (FEDC). Unique in these design activities has been the collaborative involvement of the Design Center personnel and numerous resource physicists from the fusion community who have made significant contributions in the physics design analysis as well as the physics support of the engineering design of the major FED systems and components

  10. Manifest domains:analysis and description

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2017-01-01

    _static_attribute, is_dynamic_attribute, is_inert_attribute, is_reactive_attribute, is_active_attribute, is_autonomous_attribute, is_biddable_attribute and is_programmable_attribute. The twist suggests ways of modeling “access” to the values of these kinds of attributes: the static attributes by simply “copying” them...... processes. C.A.R. Hoare series in computer science. Prentice-Hall International, London, 2004). We show how to model essential aspects of perdurants in terms of their signatures based on the concepts of endurants. And we show how one can “compile” descriptions of endurant parts into descriptions...

  11. The first accurate description of an aurora

    Science.gov (United States)

    Schröder, Wilfried

    2006-12-01

    As technology has advanced, the scientific study of auroral phenomena has increased by leaps and bounds. A look back at the earliest descriptions of aurorae offers an interesting look into how medieval scholars viewed the subjects that we study.Although there are earlier fragmentary references in the literature, the first accurate description of the aurora borealis appears to be that published by the German Catholic scholar Konrad von Megenberg (1309-1374) in his book Das Buch der Natur (The Book of Nature). The book was written between 1349 and 1350.

  12. Microscopic description of magnetized plasma: quasiparticle concept

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Decyk, V.K.

    1993-01-01

    A quasiparticle concept is developed systematically, from first principles, within the context of microscopic description of magnetized plasma. It is argued that the zeroth velocity-gyroangle harmonic of the microscopic particle distribution function under the gyrokinetic change of variables can be taken as a microscopic quasi-particle density in a reduced phase space. The nature of quasiparticles is discussed and equations of their motion are derived within both exact and reduced microscopic descriptions. The reduced one employs explicitly the separation of interesting time scales. (orig.)

  13. Human Rights Education: Is Social Work behind the Curve?

    Science.gov (United States)

    Steen, Julie A.; Mathiesen, Sally

    2005-01-01

    This article presents a descriptive assessment of human rights education within schools of social work and law. A review of course titles and descriptions within MSW programs and law programs was conducted for identification of human rights content. The results suggest a dearth of human rights content in social work curricula and a great disparity…

  14. Assessment of human exposures

    Energy Technology Data Exchange (ETDEWEB)

    Lebret, E [RIVM-National Inst. of Public Health and Environmental Protection (Netherlands)

    1996-12-31

    This article describes some of the features of the assessment of human exposure to environmental pollutants in epidemiological studies. Since exposure assessment in air pollution epidemiology studies typically involve professionals from various backgrounds, interpretation of a concepts like `exposure` may vary. A brief descriptions is therefore given by way of introduction

  15. Assessment of human exposures

    Energy Technology Data Exchange (ETDEWEB)

    Lebret, E. [RIVM-National Inst. of Public Health and Environmental Protection (Netherlands)

    1995-12-31

    This article describes some of the features of the assessment of human exposure to environmental pollutants in epidemiological studies. Since exposure assessment in air pollution epidemiology studies typically involve professionals from various backgrounds, interpretation of a concepts like `exposure` may vary. A brief descriptions is therefore given by way of introduction

  16. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  17. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

  18. Word Processing Job Descriptions and Duties.

    Science.gov (United States)

    Gajewski-Johnson, Marlyce

    In order to develop a word processing career file at Milwaukee Area Technical College, employment managers at 124 Milwaukee-area businesses were asked to provide job descriptions for all word processing positions in the company; skill and knowledge requirements necessary to obtain these positions; employee appraisal forms; wage scales; a list of…

  19. Effective lagrangian description on discrete gauge symmetries

    International Nuclear Information System (INIS)

    Banks, T.

    1989-01-01

    We exhibit a simple low-energy lagrangian which describes a system with a discrete remnant of a spontaneously broken continuous gauge symmetry. The lagrangian gives a simple description of the effects ascribed to such systems by Krauss and Wilczek: black holes carry discrete hair and interact with cosmic strings, and wormholes cannot lead to violation of discrete gauge symmetries. (orig.)

  20. Computer hardware description languages - A tutorial

    Science.gov (United States)

    Shiva, S. G.

    1979-01-01

    The paper introduces hardware description languages (HDL) as useful tools for hardware design and documentation. The capabilities and limitations of HDLs are discussed along with the guidelines needed in selecting an appropriate HDL. The directions for future work are provided and attention is given to the implementation of HDLs in microcomputers.

  1. Descriptive Developmental Research: Why Only Time?

    Science.gov (United States)

    Labouvie, Erich W.

    1975-01-01

    The usefulness of the concepts of cohort and time of measurement in descriptive developmental research was examined by comparing the time-specific cross-sectional and cohort-specific longitudinal age gradients of stable and unstable children. (Author/ED)

  2. Descriptive data of JENDL-3.2

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi; Narita, Tsutomu [eds.; Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-02-01

    The second revision of JENDL-3 (JENDL-3.2) was released in 1994. The library contains evaluated neutron nuclear data for 340 nuclides which are needed for the design of fission and fusion reactors and for shielding calculation. This report presents a brief description of the evaluation method which is given in the File-1 part of JENDL-3.2. (author)

  3. Descriptive data of JENDL-3.3

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-01-01

    The third revision of JENDL-3 (JENDL-3.3) was released in 2002. The library contains evaluated neutron nuclear data for 337 nuclides. This report presents a brief description of the evaluation method which is given in the MF1 part of JENDL-3.3. (author)

  4. Advisory processes and their descriptive data

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2005-01-01

    Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

  5. Applicability of the Organisational Climate Description Questionnaire

    African Journals Online (AJOL)

    ... Climate Description. Questionnaire – Rutgers Elementary: a South African case study ... educators of their work are determinants for the organizational climate of school. ... The article concludes with a number of recommendations on the use of the ... Region, one an Afrikaans- and the other an English-medium school.

  6. Some Dictionary Descriptions of Grammatical Structure | Branford ...

    African Journals Online (AJOL)

    This paper examines some points in the treatment of grammatical structure in four recent dictionaries of English as Ll. These are viewed against the background concepts of "Iexicogrammar" (Halliday 1978) and of the interdependence of lexicographical and syntactic descriptions of language. Its scope is necessari1y ...

  7. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...

  8. Improved motion description for action classification

    NARCIS (Netherlands)

    Jain, M.; Jégou, H.; Bouthemy, P.

    2016-01-01

    Even though the importance of explicitly integrating motion characteristics in video descriptions has been demonstrated by several recent papers on action classification, our current work concludes that adequately decomposing visual motion into dominant and residual motions, i.e., camera and scene

  9. Description of the Wetlands Research Programme

    CSIR Research Space (South Africa)

    Walmsley, RD

    1988-01-01

    Full Text Available This report presents a rationale to the development of a multidisciplinary South African Wetland Research Programme. A definition of what is meant by the term wetland is given along with a general description of what types of wetland occur in South...

  10. MPEG DASH SRD : Spatial Relationship Description

    NARCIS (Netherlands)

    Niamut, O.A.; Thomas, E.D.R.; D'Acunto, L.; Concolato, C.; Denoual, F.; Yong Lim, S.

    2016-01-01

    This paper presents the Spatial Representation Description (SRD)feature of the second amendment of MPEG DASH standard part 1, 23009-1:2014 [1]. SRD is an approach for streaming only spatial sub-parts of a video to display devices, in combination with the form of adaptive multi-rate streaming that is

  11. 49 CFR 587.13 - General description.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.13 General description. The offset deformable barrier is comprised of two elements: a fixed rigid barrier and...

  12. Journal bearing impedance descriptions for rotordynamic applications

    NARCIS (Netherlands)

    Childs, D.W.; Moes, H.; Leeuwen, van H.J.

    1977-01-01

    Bearing impedance vectors are introduced for plain journal bearings which define the bearing reaction force components as a function of the bearing motion. Impedance descriptions are developed directly for the approximate Ocvirk (short) and Sommerfeld (long) bearing solutions. The impedance vector

  13. 30 CFR 1.2 - Description.

    Science.gov (United States)

    2010-07-01

    ... MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OFFICIAL EMBLEM AND OMB CONTROL NUMBERS FOR RECORDKEEPING AND REPORTING MINE SAFETY AND HEALTH ADMINISTRATION; ESTABLISHMENT AND USE OF OFFICIAL EMBLEM § 1.2 Description. The emblem of the Mine Safety and Health Administration is of contemporary design...

  14. Descriptions of positron defect analysis capabilities

    International Nuclear Information System (INIS)

    Howell, R.H.

    1994-10-01

    A series of descriptive papers and graphics appropriate for distribution to potential collaborators has been assembled. These describe the capabilities for defect analysis using positron annihilation spectroscopy. The application of positrons to problems in the polymer and semiconductor industries is addressed

  15. Waste Management Systems Requirements and Descriptions (SRD)

    International Nuclear Information System (INIS)

    Conner, C.W.

    1986-01-01

    The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

  16. Improving the description of metabolic networks: the TCA cycle as example

    NARCIS (Netherlands)

    Stobbe, Miranda D.; Houten, Sander M.; van Kampen, Antoine H. C.; Wanders, Ronald J. A.; Moerland, Perry D.

    2012-01-01

    To collect the ever-increasing yet scattered knowledge on metabolism, multiple pathway databases like the Kyoto Encyclopedia of Genes and Genomes have been created. A complete and accurate description of the metabolic network for human and other organisms is essential to foster new biological

  17. Description of the skills acquisition programmes in Abua/Odual local ...

    African Journals Online (AJOL)

    This paper studied the impact of skills acquisition programmes in human and societal economic development in Abua/Odual Local Government Area in Rivers State. The study adopted a descriptive survey design. One hundred and thirty respondents were randomly selected from 13 skills acquisition centres as participants.

  18. 40 CFR 406.90 - Applicability; description of the ready-to-eat cereal subcategory.

    Science.gov (United States)

    2010-07-01

    ... produce various breakfast cereals normally available for human consumption without cooking. ...-to-eat cereal subcategory. 406.90 Section 406.90 Protection of Environment ENVIRONMENTAL PROTECTION... Cereal Subcategory § 406.90 Applicability; description of the ready-to-eat cereal subcategory. The...

  19. Human factors influencing decision making

    OpenAIRE

    Jacobs, Patricia A.

    1998-01-01

    This report supplies references and comments on literature that identifies human factors influencing decision making, particularly military decision making. The literature has been classified as follows (the classes are not mutually exclusive): features of human information processing; decision making models which are not mathematical models but rather are descriptive; non- personality factors influencing decision making; national characteristics influencing decision makin...

  20. 48 CFR 52.214-21 - Descriptive Literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means information...

  1. Ecosystem description of a drainage area - a strategy in biosphere descriptions during site investigations for a repository of spent nuclear fuel

    International Nuclear Information System (INIS)

    Lindborg, T.; Lofgren, A.

    2004-01-01

    During the next few years the Swedish Nuclear Fuel and Waste Management Co. (SKB) performs site investigations at two sites in Sweden for a future repository of spent nuclear fuel. Novel methods based on systems and landscape ecology are developed to understand and model the radionuclide flow in the biosphere using site specific data for a safety assessment. This work describes the strategy for development of a descriptive ecosystem model for the surface ecosystem. The site description is needed to: a) perform a safety assessment that describes and analyzes different scenarios for radionuclide releases into the ecosystem and possible pathways for dispersal or accumulation radionuclides in the ecosystem, b) detect changes caused by the construction of a repository, c) establish a baseline for detecting long-term effects of the repository. The description adopts a site-specific approach focusing on the quantification of the properties that will constitute the descriptive model. The aim is also to present the methodology for determining the properties, to describe the development of the framework for the descriptive ecosystem models by integrating use of different properties, and finally, to present vital data from other site descriptive models such as those for geology or hydrogeology. The safety assessment will use an approach, among other methods, where transport and accumulation of radionuclides will be modelled by quantifying biogeochemical pathways of matter. The descriptive ecosystem model applied to the site was therefore built to describe and quantify processes affecting i.e. turnover of matter in a drainage area. The conclusions from applying this approach was that by have estimating the flow of matter the ecological and physical constrains on the system reduces the potential variations in outcome of future states of the ecosystem and thus also reduces the uncertainties in estimating radionuclide flow and consequences to humans and the environment. (author)

  2. Ecosystem history of South Florida; Biscayne Bay sediment core descriptions

    Science.gov (United States)

    Ishman, S.E.

    1997-01-01

    The 'Ecosystem History of Biscayne Bay and the southeast Coast' project of the U.S. Geological Survey is part of a multi-disciplinary effort that includes Florida Bay and the Everglades to provide paleoecologic reconstructions for the south Florida region. Reconstructions of past salinity, nutrients, substrate, and water quality are needed to determine ecosystem variability due to both natural and human-induced causes. Our understanding of the relations between the south Florida ecosystem and introduced forces will allow managers to make informed decisions regarding the south Florida ecosystem restoration and monitoring. The record of past ecosystem conditions can be found in shallow sediment cores. This U.S. Geological Survey Open-File Report describes six shallow sediment cores collected from Biscayne Bay. The cores described herein are being processed for a variety of analytical procedures, and this provides the descriptive framework for future analyses of the included cores. This report is preliminary and has not been reviewed for conformity with U.S. Geological Survey editorial standards or with the North American Stratigraphic Code. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

  3. Descriptive catalogue of radioactive waste families

    International Nuclear Information System (INIS)

    2004-01-01

    This document describes the different types of radioactive wastes produced in France or which are expected to be produced in the future. The wastes have been shared into different families having similar characteristics. A description is made for each family: general presentation, photos, position of the family in the French classification, industrial origin, status of production. Some informations about the raw waste and its conditioning process are also given. The qualitative description is completed by some numerical data like: the quantity produced in the past and to be produced in the future, the evaluation of the radioactivity in 2002 and 2020, and the evaluation of the thermal power when it exists. Finally, some informations are given about the risk of toxicity of some chemical species or compounds. (J.S.)

  4. Parametric description of the quantum measurement process

    Science.gov (United States)

    Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

    2015-08-01

    We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

  5. System Design Description PFP Thermal Stabilization

    International Nuclear Information System (INIS)

    RISENMAY, H.R.

    2000-01-01

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures

  6. A Modal Description of Multiport Antennas

    Directory of Open Access Journals (Sweden)

    Jonathan J. Lynch

    2011-01-01

    Full Text Available This paper presents a modal description of multiport antennas that leads directly to a rigorous network representation and simple quadratic expressions for gain, efficiency, and effective area. The analysis shows that the transmitting and receiving properties of an element antenna array are exactly described by a 2×2 element scattering matrix together with a set of orthonormal mode functions and accounts for effects such as mutual coupling, scattering, reflection, and losses. The approach is quite general, only requiring that the antenna be finite and reciprocal. The scattering network description simplifies accounting of power flow while retaining a close connection to the physical antenna characteristics. The orthonormal mode functions provide a complete basis for radiated and received fields, facilitating beamforming. The theory provides rigorous definitions of input-output signals and links them to the underlying electromagnetics in a straightforward manner.

  7. Combinatorial description of space and strong interactions

    International Nuclear Information System (INIS)

    Zenczykowski, P.

    1988-01-01

    A reinterpretation is given of a successful phenomenological approach to hadron self-energy effects known as the unitarized quark model. General arguments are given that the proper description of strong interactions may require abandoning the assignment of a primary role to continuous concepts such as position and momentum in favor of discrete ones such as spin or W-spin. The reinterpretation exploits an analogy between the W-spin diagrams occurring in the calculations of hadronic loop effects and the spin network idea of Penrose. A connection between the S-matrix approach to hadron masses and the purely algebraic approach characteristic of the quark model is indicated. Several hadron mass relations generated by a resulting SU(6)/sub w/-group-theoretic expression are presented and discussed. Results of an attempt to generalize the scheme to the description of hadron vertices are reported

  8. Hydrogen electrode reaction: A complete kinetic description

    International Nuclear Information System (INIS)

    Quaino, P.M.; Gennero de Chialvo, M.R.; Chialvo, A.C.

    2007-01-01

    The kinetic description of the hydrogen electrode reaction (HER) in the whole range of overpotentials (-0.2 < η (V) < 0.40) is presented. The Volmer-Heyrovsky-Tafel mechanism was solved considering simultaneously the following items: (i) the diffusional contribution of the molecular hydrogen from and towards the electrode surface, (ii) the forward and backward reaction rates of each elementary step and (iii) a Frumkin type adsorption for the reaction intermediate. In order to verify the descriptive capability of the kinetic expressions derived, an experimental study of the HER was carried out on a rotating platinum disc electrode in acid solution. From the correlation of these results the elementary kinetic parameters were evaluated and several aspects related to the kinetic mechanism were discussed. Finally, the use of these kinetic expressions to interpret results obtained on microelectrodes is also analysed

  9. The Human Cell Atlas.

    Science.gov (United States)

    Regev, Aviv; Teichmann, Sarah A; Lander, Eric S; Amit, Ido; Benoist, Christophe; Birney, Ewan; Bodenmiller, Bernd; Campbell, Peter; Carninci, Piero; Clatworthy, Menna; Clevers, Hans; Deplancke, Bart; Dunham, Ian; Eberwine, James; Eils, Roland; Enard, Wolfgang; Farmer, Andrew; Fugger, Lars; Göttgens, Berthold; Hacohen, Nir; Haniffa, Muzlifah; Hemberg, Martin; Kim, Seung; Klenerman, Paul; Kriegstein, Arnold; Lein, Ed; Linnarsson, Sten; Lundberg, Emma; Lundeberg, Joakim; Majumder, Partha; Marioni, John C; Merad, Miriam; Mhlanga, Musa; Nawijn, Martijn; Netea, Mihai; Nolan, Garry; Pe'er, Dana; Phillipakis, Anthony; Ponting, Chris P; Quake, Stephen; Reik, Wolf; Rozenblatt-Rosen, Orit; Sanes, Joshua; Satija, Rahul; Schumacher, Ton N; Shalek, Alex; Shapiro, Ehud; Sharma, Padmanee; Shin, Jay W; Stegle, Oliver; Stratton, Michael; Stubbington, Michael J T; Theis, Fabian J; Uhlen, Matthias; van Oudenaarden, Alexander; Wagner, Allon; Watt, Fiona; Weissman, Jonathan; Wold, Barbara; Xavier, Ramnik; Yosef, Nir

    2017-12-05

    The recent advent of methods for high-throughput single-cell molecular profiling has catalyzed a growing sense in the scientific community that the time is ripe to complete the 150-year-old effort to identify all cell types in the human body. The Human Cell Atlas Project is an international collaborative effort that aims to define all human cell types in terms of distinctive molecular profiles (such as gene expression profiles) and to connect this information with classical cellular descriptions (such as location and morphology). An open comprehensive reference map of the molecular state of cells in healthy human tissues would propel the systematic study of physiological states, developmental trajectories, regulatory circuitry and interactions of cells, and also provide a framework for understanding cellular dysregulation in human disease. Here we describe the idea, its potential utility, early proofs-of-concept, and some design considerations for the Human Cell Atlas, including a commitment to open data, code, and community.

  10. Learning motivation and student achievement : description analysis and relationships both

    Directory of Open Access Journals (Sweden)

    Ari Riswanto

    2017-03-01

    Full Text Available Education is very important for humans, through the education throughout the world will increasingly flourish. However, if faced with the activities within the learning process, not a few men (students who have less motivation in learning activities. This resulted in fewer maximal learning processes and in turn will affect student achievement. This study focuses to discuss matters relating to the motivation to learn and student achievement, with the aim of strengthening the importance of motivation in the learning process so that a clear relationship with student achievement. The method used is descriptive analysis and simple correlation to the 97 students taking the course introduction to Microeconomics and Indonesian. The conclusion from this research is the students have a good record if it has a well and motivated as well, and this study concludes their tie's difference between learning motivation and achievement of students on two different courses.

  11. Unsupervised Idealization of Ion Channel Recordings by Minimum Description Length

    DEFF Research Database (Denmark)

    Gnanasambandam, Radhakrishnan; Nielsen, Morten S; Nicolai, Christopher

    2017-01-01

    and characterize an idealization algorithm based on Rissanen's Minimum Description Length (MDL) Principle. This method uses minimal assumptions and idealizes ion channel recordings without requiring a detailed user input or a priori assumptions about channel conductance and kinetics. Furthermore, we demonstrate...... that correlation analysis of conductance steps can resolve properties of single ion channels in recordings contaminated by signals from multiple channels. We first validated our methods on simulated data defined with a range of different signal-to-noise levels, and then showed that our algorithm can recover...... channel currents and their substates from recordings with multiple channels, even under conditions of high noise. We then tested the MDL algorithm on real experimental data from human PIEZO1 channels and found that our method revealed the presence of substates with alternate conductances....

  12. Best behaviour? Ontologies and the formal description of animal behaviour.

    Science.gov (United States)

    Gkoutos, Georgios V; Hoehndorf, Robert; Tsaprouni, Loukia; Schofield, Paul N

    2015-10-01

    The development of ontologies for describing animal behaviour has proved to be one of the most difficult of all scientific knowledge domains. Ranging from neurological processes to human emotions, the range and scope needed for such ontologies is highly challenging, but if data integration and computational tools such as automated reasoning are to be fully applied in this important area the underlying principles of these ontologies need to be better established and development needs detailed coordination. Whilst the state of scientific knowledge is always paramount in ontology and formal description framework design, this is a particular problem with neurobehavioural ontologies where our understanding of the relationship between behaviour and its underlying biophysical basis is currently in its infancy. In this commentary, we discuss some of the fundamental problems in designing and using behaviour ontologies, and present some of the best developed tools in this domain.

  13. Best behaviour? Ontologies and the formal description of animal behaviour

    KAUST Repository

    Gkoutos, Georgios V.

    2015-07-28

    The development of ontologies for describing animal behaviour has proved to be one of the most difficult of all scientific knowledge domains. Ranging from neurological processes to human emotions, the range and scope needed for such ontologies is highly challenging, but if data integration and computational tools such as automated reasoning are to be fully applied in this important area the underlying principles of these ontologies need to be better established and development needs detailed coordination. Whilst the state of scientific knowledge is always paramount in ontology and formal description framework design, this is a particular problem with neurobehavioural ontologies where our understanding of the relationship between behaviour and its underlying biophysical basis is currently in its infancy. In this commentary, we discuss some of the fundamental problems in designing and using behaviour ontologies, and present some of the best developed tools in this domain. © 2015 Springer Science+Business Media New York

  14. XML for Detector Description at GLAST

    Energy Technology Data Exchange (ETDEWEB)

    Bogart, Joanne

    2002-04-30

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. This paper describes its use for a GLAST detector.

  15. RSYST - a short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    1976-04-01

    The modular system RSYST is used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic experssions. Sections of the user language may be stored in the data base and activated at any time. (orig.) [de

  16. Unified geometric description of black hole thermodynamics

    International Nuclear Information System (INIS)

    Alvarez, Jose L.; Quevedo, Hernando; Sanchez, Alberto

    2008-01-01

    In the space of thermodynamic equilibrium states we introduce a Legendre invariant metric which contains all the information about the thermodynamics of black holes. The curvature of this thermodynamic metric becomes singular at those points where, according to the analysis of the heat capacities, phase transitions occur. This result is valid for the Kerr-Newman black hole and all its special cases and, therefore, provides a unified description of black hole phase transitions in terms of curvature singularities.

  17. Salt Block II: description and results

    International Nuclear Information System (INIS)

    Hohlfelder, J.J.

    1980-06-01

    A description of and results from the Salt Block II experiment, which involved the heating of and measurement of water transport within a large sample of rock salt, are presented. These results include the measurement of water released into a heated borehole in the sample as well as measured temperatures within the salt. Measured temperatures are compared with the results of a mathematical model of the experiment

  18. Thin film description by wavelet coefficients statistics

    Czech Academy of Sciences Publication Activity Database

    Boldyš, Jiří; Hrach, R.

    2005-01-01

    Roč. 55, č. 1 (2005), s. 55-64 ISSN 0011-4626 Grant - others:GA UK(CZ) 173/2003 Institutional research plan: CEZ:AV0Z10750506 Keywords : thin films * wavelet transform * descriptors * histogram model Subject RIV: BD - Theory of Information Impact factor: 0.360, year: 2005 http://library.utia.cas.cz/separaty/2009/ZOI/boldys-thin film description by wavelet coefficients statistics .pdf

  19. 1993 baseline solid waste management system description

    International Nuclear Information System (INIS)

    Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

    1994-02-01

    Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford's solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents

  20. A phenomenological calculus of Wiener description space.

    Science.gov (United States)

    Richardson, I W; Louie, A H

    2007-10-01

    The phenomenological calculus is a categorical example of Robert Rosen's modeling relation. This paper is an alligation of the phenomenological calculus and generalized harmonic analysis, another categorical example. Our epistemological exploration continues into the realm of Wiener description space, in which constitutive parameters are extended from vectors to vector-valued functions of a real variable. Inherent in the phenomenology are fundamental representations of time and nearness to equilibrium.

  1. XML for detector description at GLAST

    International Nuclear Information System (INIS)

    Bogart, J.; Favretto, D.; Giannitrapani, R.

    2001-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. The author describes its use for a GLAST detector

  2. XML for Detector Description at GLAST

    International Nuclear Information System (INIS)

    Bogart, Joanne

    2002-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. This paper describes its use for a GLAST detector

  3. TINTE. Nuclear calculation theory description report

    Energy Technology Data Exchange (ETDEWEB)

    Gerwin, H.; Scherer, W.; Lauer, A. [Forschungszentrum Juelich GmbH (DE). Institut fuer Energieforschung (IEF), Sicherheitsforschung und Reaktortechnik (IEF-6); Clifford, I. [Pebble Bed Modular Reactor (Pty) Ltd. (South Africa)

    2010-01-15

    The Time Dependent Neutronics and Temperatures (TINTE) code system deals with the nuclear and the thermal transient behaviour of the primary circuit of the High-temperature Gas-cooled Reactor (HTGR), taking into consideration the mutual feedback effects in twodimensional axisymmetric geometry. This document contains a complete description of the theoretical basis of the TINTE nuclear calculation, including the equations solved, solution methods and the nuclear data used in the solution. (orig.)

  4. Descriptive studies of Purepecha: Introductory study

    Directory of Open Access Journals (Sweden)

    Violeta Vázquez Rojas Maldonado

    2013-12-01

    Full Text Available Seven papers in this volume are the result of a collective project of linguistic description. This introduction offers a general background for such enterprise. It provides information about some sociolinguistic and grammatical aspects of the Purepecha language, a list of some recent studies on the language, it describes the orthographic conventions employed. We also provide details about the elicitation methodology and the demographic information of the language consultants.

  5. Simple Parametric Model for Airfoil Shape Description

    Science.gov (United States)

    Ziemkiewicz, David

    2017-12-01

    We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

  6. Description of the Lewin Natural Gas Model

    International Nuclear Information System (INIS)

    Kuuskraa, V.; Godec, M.

    1989-01-01

    This paper provides a brief description of the Lewin Natural Gas Model, shows how this model differs in key features from the other models participating in EMF-9, and describes how the different modeling scenarios analyzed in EMF-9 were implemented in the Lewin model. This background helps explain the key results that have been gained from applying the Lewin model to the EMF scenarios

  7. SNF/HLW Transfer System Description Document

    International Nuclear Information System (INIS)

    W. Holt

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF)/high-level radioactive waste (HLW) transfer system and associated bases, which will allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in this SDD reflects the current results of the design process

  8. Recommended procedures and methodology of coal description

    Science.gov (United States)

    Chao, E.C.; Minkin, J.A.; Thompson, C.L.

    1983-01-01

    This document is the result of a workshop on coal description held for the Branch of Coal Resources of the U.S. Geological Survey in March 1982. It has been prepared to aid and encourage the field-oriented coal scientist to participate directly in petrographic coal-description activities. The objectives and past and current practices of coal description vary widely. These are briefly reviewed and illustrated with examples. Sampling approaches and techniques for collecting columnar samples of fresh coal are also discussed. The recommended procedures and methodology emphasize the fact that obtaining a good megascopic description of a coal bed is much better done in the laboratory with a binocular microscope and under good lighting conditions after the samples have been cut and quickly prepared. For better observation and cross-checking using a petrographic microscope for identification purposes, an in-place polishing procedure (requiring less than 2 min) is routinely used. Methods for using both the petrographic microscope and an automated image analysis system are also included for geologists who have access to such instruments. To describe the material characteristics of a coal bed in terms of microlithotypes or lithotypes, a new nomenclature of (V), (E), (1), (M). (S). (X1). (X2) and so on is used. The microscopic description of the modal composition of a megascopically observed lithologic type is expressed in terms of (VEIM); subscripts are used to denote the volume percentage of each constituent present. To describe a coal-bed profile, semiquantitative data (without microscopic study) and quantitative data (with microscopic study) are presented in ready-to-understand form. The average total composition of any thickness interval or of the entire coal bed can be plotted on a triangular diagram having V, E, and I+ M +S as the apices. The modal composition of any mixed lithologies such as (X1), (X2), and so on can also be plotted on such a triangular ternary diagram

  9. Horizons of description: Black holes and complementarity

    Science.gov (United States)

    Bokulich, Peter Joshua Martin

    Niels Bohr famously argued that a consistent understanding of quantum mechanics requires a new epistemic framework, which he named complementarity . This position asserts that even in the context of quantum theory, classical concepts must be used to understand and communicate measurement results. The apparent conflict between certain classical descriptions is avoided by recognizing that their application now crucially depends on the measurement context. Recently it has been argued that a new form of complementarity can provide a solution to the so-called information loss paradox. Stephen Hawking argues that the evolution of black holes cannot be described by standard unitary quantum evolution, because such evolution always preserves information, while the evaporation of a black hole will imply that any information that fell into it is irrevocably lost---hence a "paradox." Some researchers in quantum gravity have argued that this paradox can be resolved if one interprets certain seemingly incompatible descriptions of events around black holes as instead being complementary. In this dissertation I assess the extent to which this black hole complementarity can be undergirded by Bohr's account of the limitations of classical concepts. I begin by offering an interpretation of Bohr's complementarity and the role that it plays in his philosophy of quantum theory. After clarifying the nature of classical concepts, I offer an account of the limitations these concepts face, and argue that Bohr's appeal to disturbance is best understood as referring to these conceptual limits. Following preparatory chapters on issues in quantum field theory and black hole mechanics, I offer an analysis of the information loss paradox and various responses to it. I consider the three most prominent accounts of black hole complementarity and argue that they fail to offer sufficient justification for the proposed incompatibility between descriptions. The lesson that emerges from this

  10. Durability 2007. Injection grout investigations. Background description

    International Nuclear Information System (INIS)

    Orantie, K.; Kuosa, H.

    2008-12-01

    The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

  11. Modeling Human Elements of Decision-Making

    Science.gov (United States)

    2002-06-01

    include factors such as personality, emotion , and level of expertise, which vary from individual to individual. The process of decision - making during... rational choice theories such as utility theory, to more descriptive psychological models that focus more on the process of decision - making ...descriptive nature, they provide a more realistic representation of human decision - making than the rationally based models. However these models do

  12. Quantum Description of Optical Devices Used in Interferometry

    Directory of Open Access Journals (Sweden)

    P. Kucera

    2007-09-01

    Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

  13. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  14. RSYST: short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    Since 1969, the modular system RSYST has been used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic expressions. Sections of the user language may be stored in the data base and activated at any time. Presently, an interactive version of the system is developed. It supports basic operations and interactive input checking on a front end computer

  15. Forsmark - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  16. PARR-2: reactor description and experiments

    International Nuclear Information System (INIS)

    Wyne, M.F.; Meghji, J.H.

    1990-12-01

    PARR-2 is a miniature neutron source reactor (MNSR) research reactor has been designed at the rate of 27 kW. Reactor assembly comprises of peaking characteristics with a self limiting flux. In this report reactor description with its assembly and instrumentation control system has been explained. The reactor engineering and physics experiments which can be performed on this reactor are explained in this report. PARR-2 is fueled with HEU fuel pins which are about 90% enriched in U-235. Specific requirements for the safety of the reactor, its building and the personnel, normal instrumentation as required in an industrial environment is sufficient. (A.B.)

  17. LCDD: A complete detector description package

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Norman, E-mail: Norman.Graf@slac.stanford.edu; McCormick, Jeremy, E-mail: Jeremy.McCormick@slac.stanford.edu

    2015-07-21

    LCDD has been developed to provide a complete detector description package for physics detector simulations using Geant4. All aspects of the experimental setup, such as the physical geometry, magnetic fields, and sensitive detector readouts, as well as control of the physics simulations, such as physics processes, interaction models and kinematic limits, are defined at runtime. Users are therefore able to concentrate on the design of the detector system without having to master the intricacies of C++ programming or being proficient in setting up their own Geant4 application. We describe both the XML-based file format and the processors which communicate this information to the underlying Geant4 simulation toolkit.

  18. The athena data dictionary and description language

    International Nuclear Information System (INIS)

    Bazan, A.; Ghez, P.; Le Flour, T.; Lieunard, S.; Tull, C.

    2001-01-01

    The authors have developed a data object description tool suite and service for Athena consisting of: a language grammar based upon an extended proper subset of IDL 2.0, a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface, and several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. The authors present here details of the work and experience to date on the Athena Definition Language and Athena Data Dictionary

  19. Chinese legal texts – Quantitative Description

    Directory of Open Access Journals (Sweden)

    Ľuboš GAJDOŠ

    2017-06-01

    Full Text Available The aim of the paper is to provide a quantitative description of legal Chinese. This study adopts the approach of corpus-based analyses and it shows basic statistical parameters of legal texts in Chinese, namely the length of a sentence, the proportion of part of speech etc. The research is conducted on the Chinese monolingual corpus Hanku. The paper also discusses the issues of statistical data processing from various corpora, e.g. the tokenisation and part of speech tagging and their relevance to study of registers variation.

  20. Hamiltonian description of the ideal fluid

    International Nuclear Information System (INIS)

    Morrison, P.J.

    1994-01-01

    Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems

  1. System design description PFP thermal stabilization

    International Nuclear Information System (INIS)

    RISENMAY, H.R.

    1998-01-01

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides

  2. Description of the Nuclear Training Centre

    International Nuclear Information System (INIS)

    Wagadarikar, V.K.

    1974-01-01

    The Department of Atomic Energy, Government of India has developed an on-going programme for constructing and operating heavy water moderated, natural uranium fuelled power stations of the CANDU-type. With the view to train personnel required for operation and maintenance of these stations, a Nuclear Training Centre has been set up at the site of the Rajasthan Atomic Power Station. A description of the nuclear training centre with its facilities is given. The training programme for engineers, operators, mechanical, electrical and control maintainers etc. is given in detail, along with the actual syllabi for respective courses. Examples of the typical field check list are provided. (K.B.)

  3. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  4. Theoretical Description of the Fission Process

    International Nuclear Information System (INIS)

    Witold Nazarewicz

    2003-01-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process

  5. On the thermodynamic description of real systems

    International Nuclear Information System (INIS)

    Bernardes, N.

    1984-01-01

    A new method of approach to the theory of the thermodynamic properties of real systems is proposed, to include interactions among the constituent particles of the system. The method consists in obtaining the entropy of a real system from the entropy of the corresponding ideal system by a translation in the internal energy and other relevant extensive variables. The usefulness of the method is displayed by application to the cases of: (i) real gases, and (ii) spin paramagnetism with interactions among spins. It is shown that this description corresponds to a generalization of the molecular field approximation. (Author) [pt

  6. Research team training: moving beyond job descriptions.

    Science.gov (United States)

    Nelson, LaRon E; Morrison-Beedy, Dianne

    2008-08-01

    Providing appropriate training to research team members is essential to the effective implementation and overall operation of a research project. It is important to identify job requirements beyond those listed in the job description in order to fully assess basic and supplementary training needs. Training needs should be identified prior to and during the conduct of the study. Methods for delivering the training must also be identified. This article describes the identification of training needs and methods in the design of a research team training program using examples from an HIV prevention intervention trial with adolescent girls.

  7. Theoretical Description of the Fission Process

    Energy Technology Data Exchange (ETDEWEB)

    Witold Nazarewicz

    2003-07-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process.

  8. Multiple descriptions for packetized predictive control

    DEFF Research Database (Denmark)

    Østergaard, Jan; Quevedo, Daniel

    2016-01-01

    be reliably reconstructed at the plant side. For the particular case of LTI plant models and i.i.d. channels, we show that the overall system forms a Markov jump linear system. We provide conditions for mean square stability and derive upper bounds on the operational bit rate of the quantizer to guarantee......In this paper, we propose to use multiple descriptions (MDs) to achieve a high degree of robustness towards random packet delays and erasures in networked control systems. In particular, we consider the scenario, where a data-rate limited channel is located between the controller and the plant...

  9. Multi-scale spatio-temporal analysis of human mobility

    DEFF Research Database (Denmark)

    Alessandretti, Laura; Sapiezynski, Piotr; Jørgensen, Sune Lehmann

    2017-01-01

    The recent availability of digital traces generated by phone calls and online logins has significantly increased the scientific understanding of human mobility. Until now, however, limited data resolution and coverage have hindered a coherent description of human displacements across different...

  10. Speaker diarization and speech recognition in the semi-automatization of audio description: An exploratory study on future possibilities?

    Directory of Open Access Journals (Sweden)

    Héctor Delgado

    2015-12-01

    Full Text Available This article presents an overview of the technological components used in the process of audio description, and suggests a new scenario in which speech recognition, machine translation, and text-to-speech, with the corresponding human revision, could be used to increase audio description provision. The article focuses on a process in which both speaker diarization and speech recognition are used in order to obtain a semi-automatic transcription of the audio description track. The technical process is presented and experimental results are summarized.

  11. Speaker diarization and speech recognition in the semi-automatization of audio description: An exploratory study on future possibilities?

    Directory of Open Access Journals (Sweden)

    Héctor Delgado

    2015-06-01

    This article presents an overview of the technological components used in the process of audio description, and suggests a new scenario in which speech recognition, machine translation, and text-to-speech, with the corresponding human revision, could be used to increase audio description provision. The article focuses on a process in which both speaker diarization and speech recognition are used in order to obtain a semi-automatic transcription of the audio description track. The technical process is presented and experimental results are summarized.

  12. Quantum theory as the most robust description of reproducible experiments

    Science.gov (United States)

    De Raedt, Hans; Katsnelson, Mikhail I.; Michielsen, Kristel

    2014-08-01

    It is shown that the basic equations of quantum theory can be obtained from a straightforward application of logical inference to experiments for which there is uncertainty about individual events and for which the frequencies of the observed events are robust with respect to small changes in the conditions under which the experiments are carried out. There is no quantum world. There is only an abstract physical description. It is wrong to think that the task of physics is to find out how nature is. Physics concerns what we can say about nature [45]. Physics is to be regarded not so much as the study of something a priori given, but rather as the development of methods of ordering and surveying human experience. In this respect our task must be to account for such experience in a manner independent of individual subjective judgment and therefore objective in the sense that it can be unambiguously communicated in ordinary human language [46]. The physical content of quantum mechanics is exhausted by its power to formulate statistical laws governing observations under conditions specified in plain language [46]. The first two sentences of the first quote may be read as a suggestion to dispose of, in Mermin's words [47], the "bad habit" to take mathematical abstractions as the reality of the events (in the everyday sense of the word) that we experience through our senses. Although widely circulated, these sentences are reported by Petersen [45] and there is doubt that Bohr actually used this wording [48]. The last two sentences of the first quote and the second quote suggest that we should try to describe human experiences (confined to the realm of scientific inquiry) in a manner and language which is unambiguous and independent of the individual subjective judgment. Of course, the latter should not be construed to imply that the observed phenomena are independent of the choices made by the individual(s) in performing the scientific experiment [49].The third quote

  13. The human cell atlas

    DEFF Research Database (Denmark)

    Regev, Aviv; Teichmann, Sarah A.; Lander, Eric S.

    2017-01-01

    The recent advent of methods for high-throughput single-cell molecular profiling has catalyzed a growing sense in the scientific community that the time is ripe to complete the 150-year-old effort to identify all cell types in the human body. The Human Cell Atlas Project is an international...... collaborative effort that aims to define all human cell types in terms of distinctive molecular profiles (such as gene expression profiles) and to connect this information with classical cellular descriptions (such as location and morphology). An open comprehensive reference map of the molecular state of cells...... in healthy human tissues would propel the systematic study of physiological states, developmental trajectories, regulatory circuitry and interactions of cells, and also provide a framework for understanding cellular dysregulation in human disease. Here we describe the idea, its potential utility, early...

  14. NASA Human Health and Performance Center (NHHPC)

    Science.gov (United States)

    Davis, Jeffery R.

    2010-01-01

    This slide presentation reviews the purpose, potential members and participants of the NASA Human Health and Performance Center (NHHPC). Included in the overview is a brief description of the administration and current activities of the NHHPC.

  15. FOREIGN LANGUAGES AND HUMAN DEVELOPMENT: THE CASE ...

    African Journals Online (AJOL)

    HP

    2017-07-01

    Jul 1, 2017 ... The approach is historical and descriptive in nature. .... specifically human speech, the expression of ideas by the voice, sounds expressive of thought, .... Jobs in tourism, marketing, healthcare also await people with ...

  16. Thick Description beyond the Digital Space

    Directory of Open Access Journals (Sweden)

    Marnix Beyen

    2015-12-01

    Full Text Available The arrival and rapid spread of digital media can help the humanities better discern general patterns in human societies and cultures, and single out instances or moments which need an in-depth analysis. However, the process of digitization also poses certain threats to the humanities: it introduces new and possibly distorting filters between ourselves and our object of research, it can make us blind to the social, political and cultural situatedness of the sources, and it can cause us to forget that certain aspects of human life are simply too complex to be digitally understood. Briefly elaborating on the case of parliamentary irony in Belgian history, I try to demonstrate the need to combine “flat” digital searches with multilayered hermeneutic approaches based on traditional philological research.

  17. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  18. Simpevarp - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  19. Quantum gravity from descriptive set theory

    International Nuclear Information System (INIS)

    El Naschie, M.S.

    2004-01-01

    We start from Hilbert's criticism of the axioms of classical geometry and the possibility of abandoning the Archimedean axiom. Subsequently we proceed to the physical possibility of a fundamental limitation on the smallest length connected to certain singular points in spacetime and below which measurements become meaningless, Finally we arrive at the conclusion that maximising the Hawking-Bekenstein informational content of spacetime makes the existence of a transfinite geometry for physical 'spacetime' not only plausible but probably inevitable. The main part of the paper is then concerned with a proposal for a mathematical description of a transfinite, non-Archimedean geometry using descriptive set theory. Nevertheless, and despite all abstract mathematics, we remain quite close to similar lines of investigation initiated by physicists like A. Wheeler, D. Finkelstein and G. 'tHooft. In particular we introduce a logarithmic gauge transformation linking classical gravity with the electro weak via a version of informational entropy. That way we may claim to have accomplished an important step towards a general theory of quantum gravity using ε (∞) and complexity theory and finding that α G =(2) α-bar ew -1 congruent with (1.7)(10) 38 where α G is the dimensionless Newton gravity constant, and α ew ≅128 is the fine structure constant at the electro weak scale

  20. COG Software Architecture Design Description Document

    International Nuclear Information System (INIS)

    Buck, R.M.; Lent, E.M.

    2009-01-01

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  1. Computerized Italian criticality guide, description and validation

    International Nuclear Information System (INIS)

    Carotenuto, M.; Landeyro, P.A.

    1988-10-01

    Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

  2. The Athena data dictionary and description language

    International Nuclear Information System (INIS)

    Bazan, Alain; Bouedo, Thierry; Ghez, Philippe; Marino, Massimo; Tull, Craig

    2003-01-01

    Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customize the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships,...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. We present here details of our work and experience to date on the Athena Definition Language and Athena Data Dictionary. (authors)

  3. The Athena Data Dictionary and Description Language

    CERN Document Server

    Bazan, A; Ghez, P; Marino, M; Tull, C

    2003-01-01

    Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customise the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships, ...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic...

  4. Improved description of metal oxide stability

    DEFF Research Database (Denmark)

    Jauho, Thomas Stenbæk; Olsen, Thomas; Bligaard, Thomas

    2015-01-01

    The renormalized adiabatic PBE (rAPBE) method has recently been shown to comprise a significant improvement over the random phase approximation (RPA) for total energy calculations of simple solids and molecules. Here we consider the formation energies of 19 group I and II metal oxides and a few...... transition-metal oxides. The mean absolute error relative to experiments is 0.21 eV and 0.38 eV per oxygen atom for rAPBE and RPA, respectively, and thus the rAPBE method greatly improves the description of metal-oxygen bonds across a wide range of oxides. The failure of the RPA can be partly attributed...... to the lack of error cancellation between the correlation energy of the oxide on the one hand and the bulk metal and oxygen molecule on the other hand, which are all separately predicted much too negative by the RPA. We ascribe the improved performance of the rAPBE to its significantly better description...

  5. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  6. Initial rheological description of high performance concretes

    Directory of Open Access Journals (Sweden)

    Alessandra Lorenzetti de Castro

    2006-12-01

    Full Text Available Concrete is defined as a composite material and, in rheological terms, it can be understood as a concentrated suspension of solid particles (aggregates in a viscous liquid (cement paste. On a macroscopic scale, concrete flows as a liquid. It is known that the rheological behavior of the concrete is close to that of a Bingham fluid and two rheological parameters regarding its description are needed: yield stress and plastic viscosity. The aim of this paper is to present the initial rheological description of high performance concretes using the modified slump test. According to the results, an increase of yield stress was observed over time, while a slight variation in plastic viscosity was noticed. The incorporation of silica fume showed changes in the rheological properties of fresh concrete. The behavior of these materials also varied with the mixing procedure employed in their production. The addition of superplasticizer meant that there was a large reduction in the mixture's yield stress, while plastic viscosity remained practically constant.

  7. A theoretical description of inhomogeneous turbulence

    International Nuclear Information System (INIS)

    Turner, L.

    2000-01-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). In this LDRD, we have developed a highly compact and descriptive formalism that allows us to broach the theoretically formidable morass of inhomogeneous turbulence. Our formalism has two novel aspects: (a) an adaptation of helicity basis functions to represent an arbitrary incompressible channel flow and (b) the invocation of a hypothesis of random phase. A result of this compact formalism is that the mathematical description of inhomogeneous turbulence looks much like that of homogeneous turbulence--at the moment, the most rigorously explored terrain in turbulence research. As a result, we can explore the effect of boundaries on such important quantities as the gradients of mean flow, mean pressure, triple-velocity correlations and pressure velocity correlations, all of which vanish under the conventional, but artificial, assumption that the turbulence is statistically spatially uniform. Under suitable conditions, we have predicted that a mean flow gradient can develop even when none is initially present

  8. The appropriateness of XML for diagnostic description

    Energy Technology Data Exchange (ETDEWEB)

    Neto, A. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)], E-mail: andre.neto@cfn.ist.utl.pt; Lister, J.B. [CRPP-EPFL, Association EURATOM-Confederation Suisse, 1015 Lausanne (Switzerland); Fernandes, H. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Yonekawa, I. [JAEA, Japan Atomic Energy Agency Naka (Japan); Varandas, C.A.F. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)

    2007-10-15

    A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented.

  9. The appropriateness of XML for diagnostic description

    International Nuclear Information System (INIS)

    Neto, A.; Lister, J.B.; Fernandes, H.; Yonekawa, I.; Varandas, C.A.F.

    2007-01-01

    A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented

  10. Computerized Italian criticality guide, description and validation

    Energy Technology Data Exchange (ETDEWEB)

    Carotenuto, M; Landeyro, P A [ENEA - Dipartimento Ciclo del Combustibile, Centro Ricerche Energia, Casaccia (Italy)

    1988-10-15

    Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

  11. System Description for the Double Shell Tank (DST) Confinement System

    International Nuclear Information System (INIS)

    ROSSI, H.

    2000-01-01

    This document provides a description of the Double-Shell Tank (DST) Confinement System. This description will provide a basis for developing functional, performance and test requirements (i.e., subsystem specification), as necessary, for the DST Confinement System

  12. Towards the management of the databases founded on descriptions ...

    African Journals Online (AJOL)

    The canonical model is defined in the concept language, developed in our research ... the notion of classes to produce descriptions which are, also, used in the reasoning process. ... Keys-Words: Descriptions logic/ Databases/ Semantics.

  13. Short Communications A description of gametogenesis in the panga ...

    African Journals Online (AJOL)

    1996-09-25

    Sep 25, 1996 ... Short Communications. A description of ... In this communication, descriptions ... Each fish sampled was sexed using visual criteria (Table I) and gonadal ..... dilated portions owing to different degrees of inflation caused. R.

  14. A Formal Semantics for Concept Understanding relying on Description Logics

    DEFF Research Database (Denmark)

    Badie, Farshad

    2017-01-01

    logical assumptions whose discovery may lead us to a better understanding of ‘concept understanding’. The Structure of Observed Learning Outcomes (SOLO) model as an appropriate model of increasing complexity of humans’ understanding has supported the formal analysis.......In this research, Description Logics (DLs) will be employed for logical description, logical characterisation, logical modelling and ontological description of concept understanding in terminological systems. It’s strongly believed that using a formal descriptive logic could support us in revealing...

  15. A Formal Semantics for Concept Understanding relying on Description Logics

    DEFF Research Database (Denmark)

    Badie, Farshad

    2017-01-01

    In this research, Description Logics (DLs) will be employed for logical description, logical characterisation, logical modelling and ontological description of concept understanding in terminological systems. It’s strongly believed that using a formal descriptive logic could support us in reveali...... logical assumptions whose discovery may lead us to a better understanding of ‘concept understanding’. The Structure of Observed Learning Outcomes (SOLO) model as an appropriate model of increasing complexity of humans’ understanding has supported the formal analysis....

  16. Olkiluoto site description 2008. Part 1

    International Nuclear Information System (INIS)

    2009-04-01

    This third version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2006 (Andersson et al. 2007) with the data and knowledge obtained up to December 2007. The main product of the modelling has been to develop an updated version of the descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. The Site Descriptive Model is divided into six parts: the surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and migration, which are presented in individual chapters. Five separated models are presented: the geological, rock mechanics, hydrogeological, hydrogeochemical and migration models. The main advances since Site Report 2006 are: (1) The geological model has been revised according to new data and interpretations. This has improved the consistency between the locations of the deformation zones in the geological model and the hydraulic zones in the hydrogeological model, (2) New 3D seismic data have been incorporated within the geological model and an initial model for the eastern part of the Island is presented. Site-scale brittle deformation zones are extrapolated to intersect the surrounding regional lineaments, unless prohibited by direct observations to the contrary. The alteration model has been revised, showing a clear correspondence between the illitisation and the sitescale fault zones, (3) A first account of the development of the brittle deformation history of the site is provided, (4) A new geological DFN model has been developed, that considers mapped fracture traces from both the surface and the ONKALO, (5) A new stress state model and fracture and fracture zone properties are presented, (6) A new hydrogeological DFN model has been developed, (7) An updated site scale (EPM) flow model has been developed, (8) There has been an

  17. Formal description of the OSI session layer: session service

    NARCIS (Netherlands)

    van Sinderen, Marten J.; van Eijk, P.H.J.; Vissers, C.A.; Diaz, M.

    1989-01-01

    The LOTOS formal description of the OSI session service is presented on basis of specification samples from the full description, giving account of how specification styles and session service architectural elements are reflected in the description. Both information (data types) and process

  18. 48 CFR 14.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Descriptive literature. 14... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 14.202-5 Descriptive literature. (a) Policy. Contracting officers must not require bidders to furnish descriptive literature unless it is...

  19. 48 CFR 514.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Descriptive literature... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 514.202-5 Descriptive literature... FAR 52.211-6 satisfies the requirement for descriptive literature. [74 FR 47739, Sept. 17, 2009] ...

  20. The effects of human resource flexibility on human resources development

    Directory of Open Access Journals (Sweden)

    SeidMehdi Veise

    2014-08-01

    Full Text Available Human resources are the primary factor for development of competitiveness and innovation and reaching competitive advantage and they try to improve corporate capabilities through various characteristics such as value creation, scarcity and difficulty of imitation. This paper investigates the effect of human resource flexibility and its dimensions on human resource development and its dimensions. The survey was conducted using descriptive-correlation method that intended to describe how human resource flexibility was effective on human resource development. Questionnaire was tool of data collection. The statistical population included one hundred employees of the Electric Company in Ilam province, thus census method was used. Reliability of the questionnaire was measured via Cronbach's alpha equal to 0.96. The findings revealed that flexibility and its dimensions were effective on human resource development and dimensions of it. As a result, human resource flexibility should be considered for development of human resources and employees with the highest flexibility should be selected.

  1. Security report on Siloe - the descriptive part. (1963); Rapport de surete de Siloe - partie descriptive (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Ageron, P; Chatoux, J; Denielou, G; Jacquemain, M; Mitault, G; Robien, E de; Rossillon, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-07-01

    This report is a full description of the site, the reactor, the building and the experimental facilities. It gives the nuclear, thermodynamic and hydrodynamic characteristics of the core. (authors) [French] Ce rapport decrit completement le site, le reacteur, les batiments et les installations experimentales. Il donne les caracteristiques nucleaires, thermodynamiques et hydrodynamiques du coeur. (auteurs)

  2. Geometric description of images as topographic maps

    CERN Document Server

    Caselles, Vicent

    2010-01-01

    This volume discusses the basic geometric contents of an image and presents a tree data structure to handle those contents efficiently. The nodes of the tree are derived from connected components of level sets of the intensity, while the edges represent inclusion information. Grain filters, morphological operators simplifying these geometric contents, are analyzed and several applications to image comparison and registration, and to edge and corner detection, are presented. The mathematically inclined reader may be most interested in Chapters 2 to 6, which generalize the topological Morse description to continuous or semicontinuous functions, while mathematical morphologists may more closely consider grain filters in Chapter 3. Computer scientists will find algorithmic considerations in Chapters 6 and 7, the full justification of which may be found in Chapters 2 and 4 respectively. Lastly, all readers can learn more about the motivation for this work in the image processing applications presented in Chapter 8...

  3. Demonstration Advanced Avionics System (DAAS) function description

    Science.gov (United States)

    Bailey, A. J.; Bailey, D. G.; Gaabo, R. J.; Lahn, T. G.; Larson, J. C.; Peterson, E. M.; Schuck, J. W.; Rodgers, D. L.; Wroblewski, K. A.

    1982-01-01

    The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft.

  4. Handbook of Manufacturing Control Fundamentals, description, configuration

    CERN Document Server

    Lödding, Hermann

    2013-01-01

    This first-time English publication of one of Germany’s leading manufacturing control handbooks provides a comprehensive overview of the state of the art, with detailed and easy to understand descriptions of numerous control techniques from Kanban to CONWIP to Backlog Control. Based on the proven funnel model and written for the industry, this book clearly illustrates how companies can use manufacturing control to effectively improve on-time delivery, reduce inventories and cut down throughput times. “This book distinguishes itself with its convincing systematic approach based on thorough international research. Its clear presentation and direct applicability for analysing and configuring the manufacturing control make this handbook an outstanding and unique publication on PPC.” Hans-Peter Wiendahl “The field of manufacturing control is very convincingly reviewed and presented from a theoretical and methodological perspective. Both researchers as well as practitioners will profit from it.” Peter N...

  5. Hartree-Fock description of superdeformed states

    International Nuclear Information System (INIS)

    Dobaczewski, J.; Meyer, J.

    1991-10-01

    The discovery of superdeformation has been preceded by theoretical predictions made in Nilsson-Strutinsky calculations and a description of the phenomenon still constitutes an exciting challenge to the theory of nuclear collective motion. In particular, a determination of electromagnetic transition rates requires a knowledge of microscopic collective wave functions, which can be achieved by using the Hartree-Fock (HF) theory and the generator coordinate method (GCM). In this study we present results of our calculations concerning the properties and superdeformed states in the mercury region. Using the GCM, we diagonalize the microscopic two-body hamiltonian within the basis set of constrained HF+BCS wave functions. The GCM provides values for the energy of the ground and excited states including the shape isomer which take into account the effect of correlations in the collective degree of freedom. The GCM will also allow us to discuss the qualitative modifications of the shape isomeric stability as induced by changes in pairing correlations

  6. Template for safety reports with descriptive example

    International Nuclear Information System (INIS)

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing 'descriptive examples' has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs

  7. Description of mathematical models and computer programs

    International Nuclear Information System (INIS)

    1977-01-01

    The paper gives a description of mathematical models and computer programs for analysing possible strategies for spent fuel management, with emphasis on economic analysis. The computer programs developed, describe the material flows, facility construction schedules, capital investment schedules and operating costs for the facilities used in managing the spent fuel. The computer programs use a combination of simulation and optimization procedures for the economic analyses. Many of the fuel cycle steps (such as spent fuel discharges, storage at the reactor, and transport to the RFCC) are described in physical and economic terms through simulation modeling, while others (such as reprocessing plant size and commissioning schedules, interim storage facility commissioning schedules etc.) are subjected to economic optimization procedures to determine the approximate lowest-cost plans from among the available feasible alternatives

  8. Neoclassical MHD descriptions of tokamak plasmas

    International Nuclear Information System (INIS)

    Callen, J.D.; Kim, Y.B.; Sundaram, A.K.

    1988-01-01

    Considerable progress has been made in extending neoclassical MHD theory and in exploring the linear instabilities, nonlinear behavior and turbulence models it implies for tokamak plasmas. The areas highlighted in this paper include: extension of the neoclassical MHD equations to include temperature-gradient and heat flow effects; the free energy and entropy evolution implied by this more complete description; a proper ballooning mode formalism analysis of the linear instabilities; a new rippling mode type instability; numerical simulation of the linear instabilities which exhibit a smooth transition from resistive ballooning modes at high collisionality to neoclassical MHD modes at low collisionality; numerical simulation of the nonlinear growth of a single helicity tearing mode; and a Direct-Interaction-Approximation model of neoclassical MHD turbulence and the anomalous transport it induces which substantially improves upon previous mixing length model estimates. 34 refs., 2 figs

  9. Quadrant I description of current conditions

    International Nuclear Information System (INIS)

    1990-09-01

    In accordance with the requirements of the Consent Decree issued by the Ohio Attorney General's office on August 29, 1989 and with the RCRA Section 3008(h) Consent Order issued by the US Environmental Protection Agency, Region V (USEPA) on September 29, 1989, this report, which provides a Description of Current Conditions within Quadrant I of the Portsmouth Gaseous Diffusion Plant (PORTS) located in Piketon, Ohio, has been developed and submitted for approval. The objectives of this report are to provide data concerning: (1) the current state of knowledge of the environmental setting of Quadrant I of PORTS including ground water, surface water, soil and air; and (2) the extent of known, potential and suspected contamination of these segments of the environment in Quadrant I of the facility. This report is the initial step in the comprehensive RCRA Facility Investigation (RFI) currently underway at PORTS, and will provide a foundation for all subsequent activities related to the RFI in Quadrant I

  10. Holographic description of AdS cosmologies

    Energy Technology Data Exchange (ETDEWEB)

    Hertog, Thomas [Department of Physics, UCSB, Santa Barbara, CA 93106 (United States); Horowitz, Gary T. [Department of Physics, UCSB, Santa Barbara, CA 93106 (United States)

    2005-04-01

    To gain insight in the quantum nature of the big bang, we study the dual field theory description of asymptotically anti-de Sitter solutions of supergravity that have cosmological singularities. The dual theories do not appear to have a stable ground state. One regularization of the theory causes the cosmological singularities in the bulk to turn into giant black holes with scalar hair. We interpret these hairy black holes in the dual field theory and use them to compute a finite temperature effective potential. In our study of the field theory evolution, we find no evidence for a 'bounce' from a big crunch to a big bang. Instead, it appears that the big bang is a rare fluctuation from a generic equilibrium quantum gravity state.

  11. A nonquasiclassical description of inhomogeneous superconductors

    International Nuclear Information System (INIS)

    Zaikin, A.D.; Panyukov, S.V.

    1988-01-01

    Exact microscopic equations are derived that make it possible to describe inhomogeneous superconductors when the quasi-classical approach is not suitable. These equations are simpler than the Gorkov equations. The authors generalize the derived equations for describing the nonequilibrium states of inhomogeneous superconductors. It is demonstrated that the derived equations (including the case of a nonequilibrium quasi particle distribution function) may be written in the form of linear differential equations for the simultaneous wave function μ, ν. The quasi-classical limit of such equations is examined. Effective boundary conditions are derived for the μ, ν functions that allow description of superconductors with a sharp change in parameters within the scope of the quasi-classical approach

  12. “Influence Method”. Detailed mathematical description

    International Nuclear Information System (INIS)

    Rios, I.J.; Mayer, R.E.

    2015-01-01

    A new method for the absolute determination of nuclear particle flux in the absence of known detector efficiency, the “Influence Method”, was recently published (I.J. Rios and R.E. Mayer, Nuclear Instruments & Methods in Physics Research A 775 (2015) 99–104). The method defines an estimator for the population and another estimator for the efficiency. In this article we present a detailed mathematical description which yields the conditions for its application, the probability distributions of the estimators and their characteristic parameters. An analysis of the different cases leads to expressions of the estimators and their uncertainties. - Highlights: • “Influence Method”, a new method for absolute particle flux determination. • Absolute counting method when detector efficiencies are not known. • Absolute detector efficiency determination

  13. Geometrical Description of fractional quantum Hall quasiparticles

    Science.gov (United States)

    Park, Yeje; Yang, Bo; Haldane, F. D. M.

    2012-02-01

    We examine a description of fractional quantum Hall quasiparticles and quasiholes suggested by a recent geometrical approach (F. D. M. Haldane, Phys. Rev. Lett. 108, 116801 (2011)) to FQH systems, where the local excess electric charge density in the incompressible state is given by a topologically-quantized ``guiding-center spin'' times the Gaussian curvature of a ``guiding-center metric tensor'' that characterizes the local shape of the correlation hole around electrons in the fluid. We use a phenomenological energy function with two ingredients: the shear distortion energy of area-preserving distortions of the fluid, and a local (short-range) approximation to the Coulomb energy of the fluctuation of charge density associated with the Gaussian curvature. Quasiparticles and quasiholes of the 1/3 Laughlin state are modeled as ``punctures'' in the incompressible fluid which then relax by geometric distortion which generates Gaussian curvature, giving rise to the charge-density profile around the topological excitation.

  14. Syntactic Structures as Descriptions of Sensorimotor Processes

    Directory of Open Access Journals (Sweden)

    Alistair Knott

    2014-02-01

    Full Text Available In this paper I propose a hypothesis linking elements of a model of theoretical syntax with neural mechanisms in the domain of sensorimotor processing. The syntactic framework I adopt to express this linking hypothesis is Chomsky’s Minimalism: I propose that the language-independent ’Logical Form’ (LF of a sentence reporting a concrete episode in the world can be interpreted as a detailed description of the sensorimotor processes involved in apprehending that episode. The hypothesis is motivated by a detailed study of one particular episode, in which an agent grasps a target object. There are striking similarities between the LF structure of transitive sentences describing this episode and the structure of the sensorimotor processes through which it is apprehended by an observer. The neural interpretation of Minimalist LF structure allows it to incorporate insights from empiricist accounts of syntax, relating to sentence processing and to the learning of syntactic constructions.

  15. Biological and Phytopharmacological Descriptions of Litchi Chinensis.

    Science.gov (United States)

    Kilari, Eswar Kumar; Putta, Swathi

    2016-01-01

    Plants remain a vital source of drugs and at present, much emphasis is given to nutraceuticals. Herbal medicines have been the basis of treatment and cure for various diseases and physiological conditions in the traditional methods practiced such as ayurveda and homeopathy. Litchi chinensis belongs to the Sapindaceae family and is well-known in the Indian traditional system for its traditional uses. The parts of the plant used are leaves, flowers, fruits, seed, pulp, and pericarp. All parts of the plant are rich sources of phytochemicals--epicatechin; procyanidin A2 and procyanidin B2; leucocyanidin; cyanidin glycoside, malvidin glycoside, and saponins; butylated hydroxytoluene; isolariciresinol; kaempferol; rutin; and stigmasterol. In the present review, we explore the lychee's description, traditional medicinal uses, and phytoconstituents, and investigate the pharmacological activities in various parts of the lychee to show its importance in ethanopharmacology. This is so that this review can serve as a ready-to-use material for further research on the plant.

  16. THE SPANISH SCIENTIFIC JOURNALS: A DESCRIPTIVE APPROACH

    Directory of Open Access Journals (Sweden)

    Melba G. Claudio-González

    2017-02-01

    Full Text Available The main objective of this article is to present a broad description of Spanish scientific journals. The results were obtained from a survey distributed to 1,280 editors of Spanish scientific journals included in Dulcinea database (2012 edition. The response rate was 43,8%. As specific objectives, the study aimed to characterize scientific journals and to analyze the particularities of a set of parameters that make up the economic, strategic and operational dimensions of the journals in the period studied. The results show that the funding model of the Spanish scientific journals depends mainly on institutional support, that many journals lack a stable organizational structure and rely heavily on volunteer work, and that the debate on the limitations and difficulties affecting the development of open access remains open.

  17. Holographic description of AdS cosmologies

    International Nuclear Information System (INIS)

    Hertog, Thomas; Horowitz, Gary T.

    2005-01-01

    To gain insight in the quantum nature of the big bang, we study the dual field theory description of asymptotically anti-de Sitter solutions of supergravity that have cosmological singularities. The dual theories do not appear to have a stable ground state. One regularization of the theory causes the cosmological singularities in the bulk to turn into giant black holes with scalar hair. We interpret these hairy black holes in the dual field theory and use them to compute a finite temperature effective potential. In our study of the field theory evolution, we find no evidence for a 'bounce' from a big crunch to a big bang. Instead, it appears that the big bang is a rare fluctuation from a generic equilibrium quantum gravity state

  18. Characteristics of AKR sources: A statistical description

    International Nuclear Information System (INIS)

    Hilgers, A.; Roux, A.; Lundin, R.

    1991-01-01

    A description of plasma properties within the sources of the Auroral Kilometric Radiation (AKR) is given. It is based on data collected during ∼ 50 AKR source crossings in the altitude range between 4,000 and 9,000 km by the Swedish spacecraft Viking. The following results are obtained; (i) the frequency of the lowest frequency peak of the AKR f peak is found to be very close to f ce , the electron gyrofrequency ((f peak -f ce )/f ce ≤ 0.08), on the average, (ii) the lower cutoff frequency f LC is on the average at f ce ((f LC -f ce )/f ce ≅ 0), (iii) in the sources the density is typically less than 1.5 cm -3 , which is of the order of the density of hot electrons and (iv) the source is located within an acceleration region, as evidenced by electrons accelerated above and ions accelerated below

  19. Template for safety reports with descriptive example

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

  20. IASI instrument: technical description and measured performances

    Science.gov (United States)

    Hébert, Ph.; Blumstein, D.; Buil, C.; Carlier, T.; Chalon, G.; Astruc, P.; Clauss, A.; Siméoni, D.; Tournier, B.

    2017-11-01

    IASI is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The IASI system includes 3 instruments that will be mounted on the Metop satellite series, a data processing software integrated in the EPS (EUMETSAT Polar System) ground segment and a technical expertise centre implemented in CNES Toulouse. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The optical configuration is based on a Michelson interferometer and the interferograms are processed by an on-board digital processing subsystem, which performs the inverse Fourier transforms and the radiometric calibration. The infrared imager co-registers the IASI soundings with AVHRR imager (AVHRR is another instrument on the Metop satellite). The presentation will focus on the architectures of the instrument, the description of the implemented technologies and the measured performance of the first flight model. CNES is leading the IASI program in association with EUMETSAT. The instrument Prime is ALCATEL SPACE.

  1. General description of discriminating quantum operations

    International Nuclear Information System (INIS)

    Zhang Ke-Jia; Gao Fei; Qin Su-Juan; Wen Qiao-Yan; Zhu Ping; Guo Fen-Zhuo

    2011-01-01

    The discrimination of quantum operations plays a key role in quantum information and computation. Unlike discriminating quantum states, it has some special properties which can be carried out in practice. In this paper, we provide a general description of discriminating quantum operations. Concretely speaking, we describe the distinguishability between quantum operations using a measure called operator fidelity. It is shown that, employing the theory of operator fidelity, we can not only verify some previous results to discriminate unitary operations, but also exhibit a more general discrimination condition. We further apply our results to analysing the security of some quantum cryptographic protocols and discuss the realization of our method using well-developed quantum algorithms. (general)

  2. Averaged description of 3D MHD equilibrium

    International Nuclear Information System (INIS)

    Medvedev, S.Yu.; Drozdov, V.V.; Ivanov, A.A.; Martynov, A.A.; Pashekhonov, Yu.Yu.; Mikhailov, M.I.

    2001-01-01

    A general approach by S.A.Galkin et al. in 1991 to 2D description of MHD equilibrium and stability in 3D systems was proposed. The method requires a background 3D equilibrium with nested flux surfaces to generate the metric of a Riemannian space in which the background equilibrium is described by the 2D equation of Grad-Shafranov type. The equation can be solved then varying plasma profiles and shape to get approximate 3D equilibria. In the framework of the method both planar axis conventional stellarators and configurations with spatial magnetic axis can be studied. In the present report the formulation and numerical realization of the equilibrium problem for stellarators with planar axis is reviewed. The input background equilibria with nested flux surfaces are taken from vacuum magnetic field approximately described by analytic scalar potential

  3. CANGEO program description and user's instruction

    International Nuclear Information System (INIS)

    Park, Joo Hwan; Jun, J. S.; Suk, H. C.; Hwang, D. H.; Yoo, Y. J.

    1997-10-01

    This is a report for the description and user's instruction of CANGEO (CANdu GEOmetry) program. CANGEO program is able to generate the geometry input for thermalhydraulic subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel data for a complicated geometry such as a CANDU fuel channel. And this code can be applicable to a bundle eccentricity from pressure tube center to bundle center, pressure tube creep, rod ballooning, and any symmetric subchannel geometry required by thermalhydraulic subchannel analysis code. The report also describes the basic calculation method of subchannel geometry, including user's manual, input and output for a CANDU fuel channel loaded with 37-element fuel bundle. (author). 35 refs., 6 figs

  4. Field description of coarse bioclastic fabrics

    Energy Technology Data Exchange (ETDEWEB)

    Kidwell, S.M.; Holland, S.M. (Univ. of Chicago, IL (United States))

    1991-08-01

    Shell- and bone-bearing rocks can be readily categorized into 9 macroscopic fabric types using semi-quantitative scales for close-packing and size-sorting of bioclasts greater than 2 mm in diameter. Although designed to describe fossiliferous siliciclastics and volcaniclastics, this system of field description can also be used to enlarge upon standard petrographic descriptions of fossiliferous carbonates. In cross-sectional bed views, coarse bioclasts may be densely packed. These coarse bioclasts (>2 mm) may be well sorted (central 80% of bioclasts lie within 1 or 2 adjacent phi size-classes), bimodal (well sorted but with a distinct second mode), or poorly sorted (central 80% of bioclasts distributed over 3 or more adjacent size-classes). Despite the complicating effects of bioclast shape, novices show 90% accuracy in estimating close-packing from photographs. They have only 60% accuracy in estimating size-sorting (the most common error is underestimating goodness of sorting), underscoring the importance of size-tallies to cross-check visual estimates when first using this scheme. This packing/sorting approach provides a good visual image of the fabric, and narrows the range of possible modes of origin more than alternative criteria such as volumetric percent-abundance (which shows no one-to-one equivalence with close-packing), orientation, and fragmentation. However, detailed interpretations of fabrics usually require more information on these and other features of the deposit, including bioclast condition, associated sedimentary structures, life-habits of bioclast-producers, and stratigraphic context.

  5. Brief description of the Wackersdorf Reprocessing Facility

    International Nuclear Information System (INIS)

    1986-01-01

    The DWK is now planning the construction and operation of a facility for the reprocessing of spent fuel elements and the fabrication of mixed-oxide fuel elements which will initially have an average daily throughput of 2 tons (t) of nuclear fuel. The application required by the Atomic Law was submitted to the Bavarian State Ministry for State Development and Environmental Matters on October 28, 1982. According to Par. 3, Section 1, No. 1 of the Atomic Law Procedural Ordinance such an application for permission in accordance with par. 7 AtL must explicitly be accompanied by a safety report which shall make it possible for third parties to make a judgment whether the impacts associated with the facility and its operation could damage their rights. The safety report is intended to present and explain the concept of the facility, the safety-technological design bases, and the operation of the plant, including its operation and safety systems and the impacts and proposed preventive measures. In addition to the detailed presentations in the safety report, Par. 3 of the Atomic Law Procedural Ordinance also requires a brief description of the plant designed for general public understanding, suitable for the design, which will also explain the expected impacts on the general environment and the surrounding area. Hence the brief description presents and explains the following matters: the site; the technology and state of the art for reprocessing of spent nuclear fuel; the structure and function of the proposed facility; safety provisions of the proposed facility and the management of perturbations in operation; the impacts of the facility and its operation on the environment; measures to be taken for dealing with the radioactive wastes; and provisions for ultimate shut-down of the facility

  6. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P. M.

    2001-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6)

  7. Monitored Geologic Repository Project Description Document

    International Nuclear Information System (INIS)

    Curry, P.

    2000-01-01

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M and O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6)

  8. Biomimicry: Descriptive analysis of biodiversity strategy adoption for business sustainable performance

    Directory of Open Access Journals (Sweden)

    Sivave Mashingaidze

    2014-06-01

    Full Text Available Biomimicry is a novel interdisciplinary field that mimics nature’s best ideas and processes to solve human problems. The objective of this article was to do a descriptive documentary analysis of literature in biodiversity and to recommend for business adoption as a sustainable performance strategy. The research was however based on nine (9 Life’s Principles, which were candidly inspired by nature. The research findings indicated that most business theories and strategies can mimic perfunctorily from nature for them to achieve a sustainable performance. The research was quite a conceptual and therefore did not offer direct practical proposition because its value was a descriptive of the ideas and strategies from nature and to outline its fundamental principles since biodiversity has track record of sustainability without men’s interference which humanity can also mimic

  9. SELECTION OF ONTOLOGY FOR WEB SERVICE DESCRIPTION LANGUAGE TO ONTOLOGY WEB LANGUAGE CONVERSION

    OpenAIRE

    J. Mannar Mannan; M. Sundarambal; S. Raghul

    2014-01-01

    Semantic web is to extend the current human readable web to encoding some of the semantic of resources in a machine processing form. As a Semantic web component, Semantic Web Services (SWS) uses a mark-up that makes the data into detailed and sophisticated machine readable way. One such language is Ontology Web Language (OWL). Existing conventional web service annotation can be changed to semantic web service by mapping Web Service Description Language (WSDL) with the semantic annotation of O...

  10. Employing a Qualitative Description Approach in Health Care Research

    Science.gov (United States)

    Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

    2017-01-01

    A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage. PMID:29204457

  11. Employing a Qualitative Description Approach in Health Care Research.

    Science.gov (United States)

    Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

    2017-01-01

    A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage.

  12. Gestalt descriptions embodiments and medical image interpretation

    DEFF Research Database (Denmark)

    Friis, Jan Kyrre Berg Olsen

    2017-01-01

    In this paper I will argue that medical specialists interpret and diagnose through technological mediations like X-ray and fMRI images, and by actualizing embodied skills tacitly they are determining the identity of objects in the perceptual field. The initial phase of human interpretation of vis...

  13. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

    2012-07-15

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  14. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

    2012-07-01

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  15. International Nuclear Model. Volume 3. Program description

    International Nuclear Information System (INIS)

    Andress, D.

    1985-01-01

    This is Volume 3 of three volumes of documentation of the International Nuclear Model (INM). This volume presents the Program Description of the International Nuclear Model, which was developed for the Nuclear and Alternate Fuels Division (NAFD), Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decision based on an input set of technical economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. Companion volumes to Volume 3 are: Volume 1 - Model Overview, and Volume 2 - Data Base Relationships

  16. Logistic description of investment and construction management

    Directory of Open Access Journals (Sweden)

    Sborshchikov Sergey Borisovich

    2014-01-01

    Full Text Available The article is devoted to the questions of defining dynamic behavior of investment and construction activity as a technical and economic system and its formalized description. It is offered to use the term "condition vector" as one of the main characteristics while describing investment and construction activity. Logistic interpretation of a sustainable development of investment and construction defines the concept of optimum trajectory, which considers various dependencies of its components (construction operations, their preparation, design, material, technique, personnel, information, investment, etc.. It is necessary to point out that this state is homeostatic, which means, the managing system must provide continuous monitoring of each system component of investment and construction activities in accordance with the sustainable development pathway. The concept of dynamic balance used in logistics is identical to the concept of homeostatic balance, which is accepted in system engineering. It is defined as a property of technical and economic system, which implies that its deviations from the development pathway lie within admissible values.

  17. Colony collapse disorder: a descriptive study.

    Directory of Open Access Journals (Sweden)

    Dennis Vanengelsdorp

    Full Text Available BACKGROUND: Over the last two winters, there have been large-scale, unexplained losses of managed honey bee (Apis mellifera L. colonies in the United States. In the absence of a known cause, this syndrome was named Colony Collapse Disorder (CCD because the main trait was a rapid loss of adult worker bees. We initiated a descriptive epizootiological study in order to better characterize CCD and compare risk factor exposure between populations afflicted by and not afflicted by CCD. METHODS AND PRINCIPAL FINDINGS: Of 61 quantified variables (including adult bee physiology, pathogen loads, and pesticide levels, no single measure emerged as a most-likely cause of CCD. Bees in CCD colonies had higher pathogen loads and were co-infected with a greater number of pathogens than control populations, suggesting either an increased exposure to pathogens or a reduced resistance of bees toward pathogens. Levels of the synthetic acaricide coumaphos (used by beekeepers to control the parasitic mite Varroa destructor were higher in control colonies than CCD-affected colonies. CONCLUSIONS/SIGNIFICANCE: This is the first comprehensive survey of CCD-affected bee populations that suggests CCD involves an interaction between pathogens and other stress factors. We present evidence that this condition is contagious or the result of exposure to a common risk factor. Potentially important areas for future hypothesis-driven research, including the possible legacy effect of mite parasitism and the role of honey bee resistance to pesticides, are highlighted.

  18. KALIMER fuel system preliminary design description

    International Nuclear Information System (INIS)

    Hwang, Woan; Lee, B.O.; Nam, C.; Paek, S.K.

    1998-10-01

    This document provides general design concepts, design basis, preliminary design specification and design technologies which are needed for designing the fuel/non-fuel rods and assembly ducts of the KALIMER fuel system. The core of LMFBR consists of driver fuel assembly, blanket assembly, reflector assembly, shielding assembly, control assembly and GEM (Gas Expansion Module) as well as USS, dummy assembly, detector assembly. These core components must be designed to withstand the high temperature, high flux for a long irradiation exposure time. Due to the high temperature and high flux, irradiation creep and swelling as well as thermal-mechanical deformation are occurred at the fuel/non-fuel system and cause the deformations of materials and the geometric deflections at fuel/non-fuel rods, assembly ducts and components. In order to overcome these intricate phenomena through the engineering design, the design basis including theoretical analysis methodologies and design considerations, material characteristics of fuel system, and the specifications and drawings of fuel/non-fuel rods and assembly ducts, respectively, are presented. This document is preliminary design description which is produced in the conceptual design stage, and does not present the detailed and finalized design data which can be for the manufacturing. (author). 22 refs

  19. A description of the PISC project

    International Nuclear Information System (INIS)

    1979-01-01

    This report, written as an historical review of the Plate Inspection Steering Committee project, records the background of the project and refers in general to the reasons why decisions were made during the four years the project has been running. Details are given in further reports, of which the full list, issued by the Commission of the European Communities, is as follows: Report no.1 - A description of the PISC project. Report no.2 - Ultrasonic examination of the PVRC plates nos. 50/52, 51/53 and 204. Report no.3 - Destructive examination of the PVRC plates nos. 50/52, 51/53 and 204. Report no.4 - Analysis scheme of the PISC trials results. Report no.5 - Evaluation of the PISC trials results. A list of all participants is given. Data and results of the test programme are detailed in the other reports above, but to maintain confidentiality of data the individual teams have been allocated a code number known only to the team and the PISC management. Data are only identified against code numbers. A report on conclusions and recommendations of the whole PISC programme will be published by the OECD-Committee on the Safety of Nuclear Installations (CSNI) and presented at its annual meeting 1979

  20. Transmutation Fuel Campaign Description and Status

    International Nuclear Information System (INIS)

    Jon Carmack; Kemal O. Pasamehmetoglu

    2008-01-01

    This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series of technical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, high level schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: (1) An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. (2) A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities

  1. Chiropractic and CAM Utilization: A Descriptive Review

    Directory of Open Access Journals (Sweden)

    Meeker William C

    2007-01-01

    Full Text Available Abstract Objective To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions Data Sources A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. Data Selection A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Data Synthesis Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Results Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Conclusion Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

  2. Hot Spot Removal System: System description

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

  3. INHOMOGENEOUS NEARLY INCOMPRESSIBLE DESCRIPTION OF MAGNETOHYDRODYNAMIC TURBULENCE

    International Nuclear Information System (INIS)

    Hunana, P.; Zank, G. P.

    2010-01-01

    The nearly incompressible theory of magnetohydrodynamics (MHD) is formulated in the presence of a static large-scale inhomogeneous background. The theory is an inhomogeneous generalization of the homogeneous nearly incompressible MHD description of Zank and Matthaeus and a polytropic equation of state is assumed. The theory is primarily developed to describe solar wind turbulence where the assumption of a composition of two-dimensional (2D) and slab turbulence with the dominance of the 2D component has been used for some time. It was however unclear, if in the presence of a large-scale inhomogeneous background, the dominant component will also be mainly 2D and we consider three distinct MHD regimes for the plasma beta β > 1. For regimes appropriate to the solar wind (β 2 s δp is not valid for the leading-order O(M) density fluctuations, and therefore in observational studies, the density fluctuations should not be analyzed through the pressure fluctuations. The pseudosound relation is valid only for higher order O(M 2 ) density fluctuations, and then only for short-length scales and fast timescales. The spectrum of the leading-order density fluctuations should be modeled as k -5/3 in the inertial range, followed by a Bessel function solution K ν (k), where for stationary turbulence ν = 1, in the viscous-convective and diffusion range. Other implications for solar wind turbulence with an emphasis on the evolution of density fluctuations are also discussed.

  4. Description of an open quantum mechanical system

    International Nuclear Information System (INIS)

    Rotter, I.; Forschungszentrum Rossendorf e.V.

    1994-05-01

    A model for the description of an open quantum mechanical many-particle system is formulated. It starts from the shell model and treats the continuous states by a coupled channels method. The mixing of the discrete shell model states via the continuum of decay channels results in the genuine decaying states of the system. These states are eigenstates of a non-Hermitean Hamilton operator the eigenvalues of which give both the energies and the widths of the states. All correlations between two particles which are caused by the two-particle residual interaction, are taken into account including those via the continuum. In the formalism describing the open quantum mechanical system, the coupling between the system and its environment appears nonlinearly. If the resonance states start to overlap, a redistribution of the spectroscopic values ('trapping effect') takes place. As a result, the complexity of the system is reduced at high level density, structures in space and time are formed. This redistribution describes, on the one hand, the transition from the well-known nuclear properties at low level density to those at high level density and fits, on the other hand, into the concept of selforganization. (orig.)

  5. Research reactor job analysis - A project description

    International Nuclear Information System (INIS)

    Yoder, John; Bessler, Nancy J.

    1988-01-01

    Addressing the need of the improved training in nuclear industry, nuclear utilities established training program guidelines based on Performance-Based Training (PBT) concepts. The comparison of commercial nuclear power facilities with research and test reactors owned by the U.S. Department of Energy (DOE), made in an independent review of personnel selection, training, and qualification requirements for DOE-owned reactors pointed out that the complexity of the most critical tasks in research reactors is less than that in power reactors. The U.S. Department of Energy (DOE) started a project by commissioning Oak Ridge Associated Universities (ORAU) to conduct a job analysis survey of representative research reactor facilities. The output of the project consists of two publications: Volume 1 - Research Reactor Job Analysis: Overview, which contains an Introduction, Project Description, Project Methodology,, and. An Overview of Performance-Based Training (PBT); and Volume 2 - Research Reactor Job Analysis: Implementation, which contains Guidelines for Application of Preliminary Task Lists and Preliminary Task Lists for Reactor Operators and Supervisory Reactor Operators

  6. Improved motion description for action classification

    Directory of Open Access Journals (Sweden)

    Mihir eJain

    2016-01-01

    Full Text Available Even though the importance of explicitly integrating motion characteristics in video descriptions has been demonstrated by several recent papers on action classification, our current work concludes that adequately decomposing visual motion into dominant and residual motions, i.e.: camera and scene motion, significantly improves action recognition algorithms. This holds true both for the extraction of the space-time trajectories and for computation of descriptors.We designed a new motion descriptor – the DCS descriptor – that captures additional information on local motion patterns enhancing results based on differential motion scalar quantities, divergence, curl and shear features. Finally, applying the recent VLAD coding technique proposed in image retrieval provides a substantial improvement for action recognition. These findings are complementary to each other and they outperformed all previously reported results by a significant margin on three challenging datasets: Hollywood 2, HMDB51 and Olympic Sports as reported in (Jain et al. (2013. These results were further improved by (Oneata et al. (2013; Wang and Schmid (2013; Zhu et al. (2013 through the use of the Fisher vector encoding. We therefore also employ Fisher vector in this paper and we further enhance our approach by combining trajectories from both optical flow and compensated flow. We as well provide additional details of DCS descriptors, including visualization. For extending the evaluation, a novel dataset with 101 action classes, UCF101, was added.

  7. Who's minding the charge description master?

    Science.gov (United States)

    Schaum, Kathleen D

    2011-11-01

    Just as it takes a team to manage chronic wounds, it takes a team to maintain the CDM. The technical staff from the wound care department should be represented on this team and should share the appropriate HCPCS codes and CPT codes, product descriptions, and costs for all procedures, services, supplies, drugs, and biologics used in their department. The billing department should ensure that the appropriate revenue codes for each payer are listed for each item on the CDM. Based on costs supplied by the wound care department, the finance department should consistently assign hospital charges to each line item on the CDM. The information technology department is responsible for making the specific changes to the CDM in the computer system. Most hospitals have a CDM coordinator. The technical staff from the wound care department should work closely with the CDM coordinator and should obtain from him/her the policies and procedures for maintaining the wound care department CDM. Most CDM coordinators will also provide a CDM Change Request Form. Use that form each year when the hospital is performing its annual CDM maintenance and throughout the year to add procedures, services, supplies, drugs, or biologics to your wound care offerings and/or when the cost for these offerings change.

  8. Effective interactions for description of multistep processes

    International Nuclear Information System (INIS)

    Avrigeanu, M.; Stetcu, I.; Avrigeanu, V.; Antonov, A.N.; Lenske, H.

    2000-01-01

    The reliability of realistic M3Y effective NN interactions to describe multistep direct (MSD) processes is proved by analysing the corresponding real optical potentials. This trial is done in order to overcome the uncertainties of the effective NN-interaction strength V 0 obtained by direct fit to the experimental data. The microscopic potential for the nucleon-nucleus scattering at energies lower than 100 MeV has been calculated by using nucleonic and mesonic form factors. It has been analysed through (i) a comparison with phenomenological optical potentials, and (ii) its use for description of nucleon elastic scattering angular distributions. It results that the strongly simplified model interactions usually involved within MSD reaction theory, e.g. 1 fm range Yukawa (1Y) term, neglect important dynamical details of such processes. An 1Y-equivalent V 0 strength of a realistic effective NN interaction is determined by corresponding optical-potential volume integrals, and involved within Feshbach-Kerman-Koonin theory calculations with the final goal of MSD studies without any V 0 free parameter. (authors)

  9. Transport description of damped nuclear reactions

    International Nuclear Information System (INIS)

    Randrup, J.

    1984-01-01

    This lecture series is concerned with the transport description of damped nuclear reactions. Part 1 is an elementary introduction to the general transport theory of nuclear dynamics. It can be read without any special knowledge of the field, although basic quantum mechanics is required for the formal derivation of the general expressions for the transport coefficients. The results can also be used in a wider context than the present one. Part 2 gives the student an up-to-date orientation about recent progress in the understanding of the angular-momentum variables in damped reactions. The emphasis is here on the qualitative understanding of the physics rather than the, at times somewhat tedious, formal derivations. More detailed presentations are due to be published soon. By necessity entire topics have been omitted. For example, no discussion is given of the calculation of the form factors, and the several instructive applications of the theory to transport of mass and change are not covered at all. For these topics they refer to the literature. It is hoped that the present notes provide a sufficient basis to make the literature on the subject accessible to the student

  10. New science teachers' descriptions of inquiry enactment

    Science.gov (United States)

    Dreon, Oliver, Jr.

    This phenomenological study demonstrates the influence that affective factors have on beginning teachers' ability to enact instructional practices. Through narratives shared in interviews and web log postings, two beginning science teachers' emotional engagement with their instructional practices, especially that of implementing inquiry-based instruction, and the resulting impact these emotions had on professional decision-making were evidenced. Anxiety emerged as the most significant impacting emotion on instructional decision-making with the participants. Through their stories, the two participants describe how their emotions and views of self influence whether they continue using inquiry pedagogy or alter their lesson to adopt more didactic means of instruction. These emotions arise from their feelings of being comfortable teaching the content (self-efficacy), from the unpredictability of inquiry lessons (control beliefs), from how they perceive their students as viewing them (teacher identity) and from various school constraints (agency). This research also demonstrates how intertwined these aspects are, informing each other in a complex, dialectical fashion. The participants' self-efficacy and professional identity emerge from their interactions with the community (their students and colleagues) and the perceived agency afforded by their schools' curricula and administration. By providing descriptions of teachers' experiences enacting inquiry pedagogy, this study expands our understanding of factors that influence teachers' instructional practices and provides a basis for reforming science teacher preparation.

  11. Receptive fields selection for binary feature description.

    Science.gov (United States)

    Fan, Bin; Kong, Qingqun; Trzcinski, Tomasz; Wang, Zhiheng; Pan, Chunhong; Fua, Pascal

    2014-06-01

    Feature description for local image patch is widely used in computer vision. While the conventional way to design local descriptor is based on expert experience and knowledge, learning-based methods for designing local descriptor become more and more popular because of their good performance and data-driven property. This paper proposes a novel data-driven method for designing binary feature descriptor, which we call receptive fields descriptor (RFD). Technically, RFD is constructed by thresholding responses of a set of receptive fields, which are selected from a large number of candidates according to their distinctiveness and correlations in a greedy way. Using two different kinds of receptive fields (namely rectangular pooling area and Gaussian pooling area) for selection, we obtain two binary descriptors RFDR and RFDG .accordingly. Image matching experiments on the well-known patch data set and Oxford data set demonstrate that RFD significantly outperforms the state-of-the-art binary descriptors, and is comparable with the best float-valued descriptors at a fraction of processing time. Finally, experiments on object recognition tasks confirm that both RFDR and RFDG successfully bridge the performance gap between binary descriptors and their floating-point competitors.

  12. Chiropractic and CAM utilization: a descriptive review.

    Science.gov (United States)

    Lawrence, Dana J; Meeker, William C

    2007-01-22

    To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

  13. Theoretical descriptions of neutron emission in fission

    International Nuclear Information System (INIS)

    Madland, D.G.

    1991-01-01

    Brief descriptions are given of the observables in neutron emission in fission together with early theoretical representations of two of these observables, namely, the prompt fission neutron spectrum N(E) and the average prompt neutron multiplicity ν-bar p . This is followed by summaries, together with examples, of modern approaches to the calculation of these two quantities. Here, emphasis is placed upon the predictability and accuracy of the new approaches. In particular, the dependencies of N(E) and ν-bar p upon the fissioning nucleus and its excitation energy are discussed. Then, recent work in multiple-chance fission and other recent work involving new measurements are presented and discussed. Following this, some properties of fission fragments are mentioned that must be better known and better understood in order to calculate N(E) and ν-bar p with higher accuracy than is currently possible. In conclusion, some measurements are recommended for the purpose of benchmarking simultaneous calculations of neutron emission and gamma emission in fission. (author). 32 refs, 26 figs

  14. Hot Spot Removal System: System description

    International Nuclear Information System (INIS)

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

  15. GOOD GOVERNANCE: NORMATIVE VS. DESCRIPTIVE DIMENSION

    Directory of Open Access Journals (Sweden)

    Ciprian IFTIMOAEI

    2015-04-01

    Full Text Available The concept of “good governance” was used for the first time in the 1989 World Bank Report – Sub-Saharan Africa: From Crisis to Sustainable Growth. A Long-Term Perspective Study – and has already made history in international studies, especially after the breakdown of the communist regimes. The governance has to do with authority, decision-making and accountability.The good governance is defined as the capacity of the government to manage a nation’s affaires, to provide economic development, welfare for citizens, and social protection for the poor. In this article,the concept of good governance is analysed according to two main dimensions: the normative dimension which comprises principles, values and norms that are guiding the international community and the governments in the management of policymaking process;the descriptive dimension which refers to the practical aspects of implementing the good governance’s standards as policies, programmes and structural reforms with the aim of solving or ameliorating the problems of developing countries.

  16. Visualizing Natural Language Descriptions: A Survey

    OpenAIRE

    Hassani, Kaveh; Lee, Won-Sook

    2016-01-01

    A natural language interface exploits the conceptual simplicity and naturalness of the language to create a high-level user-friendly communication channel between humans and machines. One of the promising applications of such interfaces is generating visual interpretations of semantic content of a given natural language that can be then visualized either as a static scene or a dynamic animation. This survey discusses requirements and challenges of developing such systems and reports 26 graphi...

  17. Incorporating Human Interindividual Biotransformation ...

    Science.gov (United States)

    The protection of sensitive individuals within a population dictates that measures other than central tendencies be employed to estimate risk. The refinement of human health risk assessments for chemicals metabolized by the liver to reflect data on human variability can be accomplished through (1) the characterization of enzyme expression in large banks of human liver samples, (2) the employment of appropriate techniques for the quantification and extrapolation of metabolic rates derived in vitro, and (3) the judicious application of physiologically based pharmacokinetic (PBPK) modeling. While in vitro measurements of specific biochemical reactions from multiple human samples can yield qualitatively valuable data on human variance, such measures must be put into the perspective of the intact human to yield the most valuable predictions of metabolic differences among humans. For quantitative metabolism data to be the most valuable in risk assessment, they must be tied to human anatomy and physiology, and the impact of their variance evaluated under real exposure scenarios. For chemicals metabolized in the liver, the concentration of parent chemical in the liver represents the substrate concentration in the MichaelisMenten description of metabolism. Metabolic constants derived in vitro may be extrapolated to the intact liver, when appropriate conditions are met. Metabolic capacity Vmax; the maximal rate of the reaction) can be scaled directly to the concentration

  18. [Gut microbiota: Description, role and pathophysiologic implications].

    Science.gov (United States)

    Landman, C; Quévrain, E

    2016-06-01

    The human gut contains 10(14) bacteria and many other micro-organisms such as Archaea, viruses and fungi. Studying the gut microbiota showed how this entity participates to gut physiology and beyond this to human health, as a real "hidden organ". In this review, we aimed to bring information about gut microbiota, its structure, its roles and its implication in human pathology. After bacterial colonization in infant, intestinal microbial composition is unique for each individual although more than 95% can be assigned to four major phyla. The use of culture independent methods and more recently the development of high throughput sequencing allowed to depict precisely gut microbiota structure and diversity as well as its alteration in diseases. Gut microbiota is implicated in the maturation of the host immune system and in many fundamental metabolic pathways including sugars and proteins fermentation and metabolism of bile acids and xenobiotics. Imbalance of gut microbial populations or dysbiosis has important functional consequences and is implicated in many digestive diseases (inflammatory bowel diseases, colorectal cancer, etc.) but also in obesity and autism. These observations have led to a surge of studies exploring therapeutics which aims to restore gut microbiota equilibrium such as probiotics or fecal microbiota transplantation. But recent research also investigates biological activity of microbial products which could lead to interesting therapeutics leads. Copyright © 2015 Société Nationale Française de Médecine Interne (SNFMI). Published by Elsevier SAS. All rights reserved.

  19. Renewable energy for passive house heating. Part 1. Building description

    Energy Technology Data Exchange (ETDEWEB)

    Badescu, V. [Polytechnic Univ., Bucharest (Romania). Faculty of Mechanical Engineering; Sicre, B. [Technical Univ., Chemnitz (Germany). Computational Physics

    2003-12-01

    A passive house is a cost-efficient building that can manage throughout the heating period, due to its specific construction design, with more than 10 times less heat energy than the same building designed to standards presently applicable across Europe. Its extended thermal insulation and enhanced air-tightness removes the need for temperatures higher than 50 {sup o}C. This makes renewable energy sources particularly suitable for heating, cooling and domestic hot water production. Modeling of renewable energy usage for space heating requires as a preliminary stage the detailed description of the building structure, of the HVAC equipment and of the internal heat sources. This paper shows the main data used to model the thermal behavior of a passive house. Details about Pirmasens Passive House (Rhineland Palatinate, Germany) are given, as for example, the internal heat sources, including electric appliances, heat and humidity released by human bodies, thermal internal facilities as hot and cold water pipes. All these are quantified by using statistically derived data. A detailed time schedule for a standard German family with two adults and two children was prepared. It takes into account the national celebrations, vacation and weekends among others. (Author)

  20. Professional values of Turkish nurses: A descriptive study.

    Science.gov (United States)

    Cetinkaya-Uslusoy, Esin; Paslı-Gürdogan, Eylem; Aydınlı, Ayse

    2017-06-01

    Professional values improve the quality of nurses' professional lives, reduce emotional exhaustion and depersonalization, increase personal success, and help to make collaborations with the members of the healthcare team more frequent. The purpose of this study was to describe the professional values of Turkish nurses and to explore the relationships between nurses' characteristics. This was a descriptive study of a convenience sample consisting of 269 clinical nurses. A questionnaire was used to identify socio-demographic characteristics, and the Nurses' Professional Values Scale was applied. Ethical considerations: Permission to conduct the study was received from the hospital and the Institutional Review Boards of the Süleyman Demirel University ethic committee. The mean scale score of the participant nurses was 165.41 ± 20.79. The results of this study revealed that human dignity was the most important professional value for nurses, and the importance attached to these values showed statistically significant differences by age, length of service, educational level, marital status, position at work, and receiving relevant in-service training. Nurses' Professional Values Scale scores showed that nurses give above average and attached importance to professional values.

  1. Towards a conceptual description of Physical and Rehabilitation Medicine.

    Science.gov (United States)

    Gutenbrunner, Christoph; Meyer, Thorsten; Melvin, John; Stucki, Gerold

    2011-09-01

    Physical and Rehabilitation Medicine (PRM) is an independent medical specialty focusing on the improvement of functioning. A shared understanding of concepts is of vital importance for integrated action in this field. The aim of the present paper is to provide a conceptual model of PRM, to give background on its development and adoptions, and to explain the choice of terms, phrases, and concepts. It is based on the terms and concepts of the International Classification of Functioning, Disability and Health (ICF) that provides a widely accepted conceptual model and taxonomy of human functioning. Based on the White Book on Physical and Rehabilitation Medicine in Europe of 2006 a first proposal for a conceptual description of rehabilitation has been published in 2007. This proposal has been subjected to comments for modifications and amendments. E.g. it was underlined that PRM can apply both a health condition perspective including curative approaches and measures aiming at body functions and structures and a multi-dimensional and multi-professional team approach aiming to optimize functioning from a comprehensive functioning and disability perspective. The interaction between the PRM specialist and the person should be characterized as a partnership. PRM specialists work across all areas of health services and across all age groups. In summary, the specialty of PRM is characterized as the medicine of functioning.

  2. Macroscopic description of the limb muscles of Tupinambis merianae

    Directory of Open Access Journals (Sweden)

    Juliana Barbosa Casals

    2012-03-01

    Full Text Available Tegu lizard (Tupinambis merianae belongs to the Teiidae family. It is distributed throughout the Americas, with many species, including Brazilian ones. They are from the Tupinambis genus, the largest representatives of the Teiidae family. For this study three animals (run over coming from donation were used. The dissected lizards were fixed in 10%, formaldehyde, and the macroscopic analysis was carried out in a detailed and photo documented way, keeping the selected structures “in situ”. This paper had as its main aim contributing to the macroscopic description of the chest myology, as well as the thoracic and pelvic limbs of the lizard T. merianae. The results obtained from this research were compared to authors who have studied animals from the same Reptilia class. Thus, we conclude that our macroscopic results are similar to those already described by the researchers Hildebrand (1995, Moro and Abdala (2004 and Abdala and Diogo (2010. We should highlight that the knowledge on anatomy has importance and applications to various areas within Biology, contributing in a substantial way to the areas of human health and technology.

  3. More Human than Human.

    Science.gov (United States)

    Lawrence, David

    2017-07-01

    Within the literature surrounding nonhuman animals on the one hand and cognitively disabled humans on the other, there is much discussion of where beings that do not satisfy the criteria for personhood fit in our moral deliberations. In the future, we may face a different but related problem: that we might create (or cause the creation of) beings that not only satisfy but exceed these criteria. The question becomes whether these are minimal criteria, or hierarchical, such that those who fulfill them to greater degree should be afforded greater consideration. This article questions the validity and necessity of drawing divisions among beings that satisfy the minimum requirements for personhood; considering how future beings-intelligent androids, synthezoids, even alternate-substrate sentiences-might fit alongside the "baseline" human. I ask whether these alternate beings ought to be considered different to us, and why this may or may not matter in terms of a notion of "human community." The film Blade Runner, concerned in large part with humanity and its key synthezoid antagonist Roy Batty, forms a framing touchstone for my discussion. Batty is stronger, faster, more resilient, and more intelligent than Homo sapiens. His exploits, far beyond the capability of normal humans, are contrasted with his frailty and transient lifespan, his aesthetic appreciation of the sights he has seen, and his burgeoning empathy. Not for nothing does his creator within the mythos term him "more human than human."

  4. Shifting sands - from descriptions to solutions.

    Science.gov (United States)

    Armstrong, R; Pettman, T L; Waters, E

    2014-06-01

    Public health practitioners and policymakers value research evidence as one of many resources to use in evidence-informed decision making (EIDM) for public health. However, both researchers and decision-makers have described persistent barriers and facilitators involved in using research evidence for public health practice and policy. This is likely to affect the extent to which research evidence is influential or useful in decisions. Numerous taxonomies, typologies and frameworks are available to guide action in EIDM, but their application in practice is relatively unknown. The Public Health Evidence group based in Australia, which incorporates The Cochrane Collaboration's Public Health Review Group, have adapted a number of conceptualizations of research use and types of evidence into a practical typology that defines and illustrates three main types of evidence used in evidence-informed public health: data (Type 1), intervention effectiveness (Type 2) and implementation evidence (Type 3). The authors have actively used this typology within our primary research, evidence synthesis, workforce development and stakeholder engagement strategies, which has enabled practical application of these concepts. To test the relevance of the typology in practice, relevant findings from our applied research and evaluation (including two exploratory studies of evidence use in decision-making and evaluations of the use and impact of systematic reviews among end-users) were triangulated. The typology has been useful in stakeholder interactions when defining evidence, and identifying processes for EIDM. There was a preference for defining evidence as descriptive evidence (data) rather than impact evidence and implementation evidence. Practitioners were confident and competent at generating and using data and community views descriptively for priority setting (describing the problem). However, finding and using impact and implementation evidence appropriate for strategy development

  5. Theoretical and Empirical Descriptions of Thermospheric Density

    Science.gov (United States)

    Solomon, S. C.; Qian, L.

    2004-12-01

    The longest-term and most accurate overall description the density of the upper thermosphere is provided by analysis of change in the ephemeris of Earth-orbiting satellites. Empirical models of the thermosphere developed in part from these measurements can do a reasonable job of describing thermospheric properties on a climatological basis, but the promise of first-principles global general circulation models of the coupled thermosphere/ionosphere system is that a true high-resolution, predictive capability may ultimately be developed for thermospheric density. However, several issues are encountered when attempting to tune such models so that they accurately represent absolute densities as a function of altitude, and their changes on solar-rotational and solar-cycle time scales. Among these are the crucial ones of getting the heating rates (from both solar and auroral sources) right, getting the cooling rates right, and establishing the appropriate boundary conditions. However, there are several ancillary issues as well, such as the problem of registering a pressure-coordinate model onto an altitude scale, and dealing with possible departures from hydrostatic equilibrium in empirical models. Thus, tuning a theoretical model to match empirical climatology may be difficult, even in the absence of high temporal or spatial variation of the energy sources. We will discuss some of the challenges involved, and show comparisons of simulations using the NCAR Thermosphere-Ionosphere-Electrodynamics General Circulation Model (TIE-GCM) to empirical model estimates of neutral thermosphere density and temperature. We will also show some recent simulations using measured solar irradiance from the TIMED/SEE instrument as input to the TIE-GCM.

  6. Prolonged grieving after abortion: a descriptive study.

    Science.gov (United States)

    Brown, D; Elkins, T E; Larson, D B

    1993-01-01

    Although flawed by methodological problems, the research literature tends to provide support for the assumption that induced abortion in the 1st trimester is not accompanied by enduring negative psychological sequelae. In cases where such sequelae are reported, the morbidity is attributed to a pre-existing psychiatric condition or circumstances precipitating the choice of abortion. However, detailed descriptive letters from 45 women prepared in response to a request by a pastor of an upper-middle-class Protestant congregation in Florida indicate that prolonged grieving after abortion may be more widespread phenomenon than previously believed. Letter writers ranged in age from 25-60 years; 75% were unmarried at the time of the procedure and 29% aborted before the legalization of abortion in the US. The most frequently cited long-term sequela, especially among those who felt coerced to abort, was a continued feeling of guilt. Fantasies about the aborted fetus was the next most frequently mentioned experience. Half of the letter writers referred to their abortions, as "murder" and 44% voiced regret about their decision to abort. Other long-term effects included depression (44%), feelings of loss (31%), shame (27%), and phobic responses to infants (13%). For 42% of these women, the adverse psychological effects of abortion endured over 10 years. Since letter-writers came from a self-selected population group with a known bias against abortion and only negative experiences were solicited, these experiences must be regarded as subjectives and anecdotal. However, they draw attention to the need for methodologically sound studies of a possible prolonged grief syndrome among a small percentage of women who have abortions, especially when coercion is involved.

  7. INJURIES IN QUIDDITCH: A DESCRIPTIVE EPIDEMIOLOGICAL STUDY.

    Science.gov (United States)

    Pennington, Rachel; Cooper, Ashley; Edmond, Evan; Faulkner, Alastair; Reidy, Michael J; Davies, Peter S E

    2017-10-01

    Quidditch is a fast growing, physically intense, mixed-gender full-contact sport. Originally adapted from Harry Potter novels, quidditch was first played in 2005 in the USA but is now played worldwide. It is essential to elucidate patterns of injury for the safety and growth of the sport of quidditch. It also provides a unique opportunity to study injury patterns in mixed-gender full-contact sport, an area of increasing importance with the developing culture of transition from single-gender to mixed-gender sports. The purpose of this investigation was to examine the types of injuries sustained while playing quidditch in terms of their incidence, anatomical distribution and severity, and gender distribution. An anonymous self-reporting questionnaire was distributed to all active quidditch players in the UK. Data collection included player demographics, type of injury, mechanism of injury, player position, experience and treatment required, relating to the previous 12 months. A total of 348 participants of 684 eligible athletes responded to the questionnaire representing a 50.87% response rate. There were 315 injuries reported by 180 athletes in total, with an overall incidence of 4.06 injuries per 1,000 hours. A statistically significantly different rate of concussion was observed with female athletes sustaining more concussion than males (p=0.006). The overall rate of concussion was 0.651/1000hrs in males and 1.163/1000hrs in females (0.877/1000 hours overall). This study provides the first quantitative description of injury rates in quidditch. The overall injury rates are no higher than those reported in other recreational contact sports. Female athletes were found to have a higher rate of concussion, which needs further investigation. These findings are relevant to players concerned about safety in quidditch and to governing bodies regarding governance of the sport. 3b.

  8. St. James marine terminal facility description

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    The US Department of Energy (DOE) currently owns and operates a marine terminal on the west bank of the Mississippi River at St. James, Louisiana. The St. James facility was constructed by the Department to provide marine services associated with the fill and drawdown of the Strategic Petroleum Reserve (SPR) crude oil storage facilities located at Bayou Choctaw and Weeks Island, Louisiana. Although strategic to the mission of the SPR in the event of a national emergency, the St. James terminal is situated such that it has a high potential to also serve the commercial industry`s needs for crude oil terminalling and storage. The St. James terminal is located approximately 45 miles west of New Orleans and 30 miles southeast of Baton Rouge, and approximately 160 miles upstream from the mouth of the Mississippi River. Construction of the St. James terminal was initiated in 1978 and was completed in 1980. Since then, the terminal has received and transferred over 125 million barrels of crude oil to the SPR sites for storage. For crude oil distribution, the St. James terminal was connected to the neighboring LOCAP terminal by a 0.1 mile 36-inch pipeline in 1981 and to the Capline terminal by a 0.5 mile 30-inch pipeline in 1988. The terminal also has a 30-inch pipeline connection to the Koch oil terminal which was used for initial fill purposes; however, this pipeline has been disconnected and is currently inactive. A complete description of the St. James terminal facilities, operational capabilities, operational certifications, and future Government requirements are presented in Sections 2, 3, 4, and 5 respectively.

  9. Shippingport Spent Fuel Canister System Description

    International Nuclear Information System (INIS)

    JOHNSON, D.M.

    2000-01-01

    In 1978 and 1979, a total of 72 blanket fuel assemblies (BFAs), irradiated during the operating cycles of the Shippingport Atomic Power Station's Pressurized Water Reactor (PWR) Core 2 from April 1965 to February 1974, were transferred to the Hanford Site and stored in underwater storage racks in Cell 2R at the 221-T Canyon (T-Plant). The initial objective was to recover the produced plutonium in the BFAs, but this never occurred and the fuel assemblies have remained within the water storage pool to the present time. The Shippingport Spent Fuel Canister (SSFC) is a confinement system that provides safe transport functions (in conjunction with the TN-WHC cask) and storage for the BFAs at the Canister Storage Building (CSB). The current plan is for these BFAs to be retrieved from wet storage and loaded into SSFCs for dry storage. The sealed SSFCs containing BFAs will be vacuum dried, internally backfilled with helium, and leak tested to provide suitable confinement for the BFAs during transport and storage. Following completion of the drying and inerting process, the SSFCs are to be delivered to the CSB for closure welding and long-term interim storage. The CSB will provide safe handling and dry storage for the SSFCs containing the BFAs. The purpose of this document is to describe the SSFC system and interface equipment, including the technical basis for the system, design descriptions, and operations requirements. It is intended that this document will be periodically updated as more equipment design and performance specification information becomes available

  10. Automated Linguistic Personality Description and Recognition Methods

    Directory of Open Access Journals (Sweden)

    Danylyuk Illya

    2016-12-01

    Full Text Available Background: The relevance of our research, above all, is theoretically motivated by the development of extraordinary scientific and practical interest in the possibilities of language processing of huge amount of data generated by people in everyday professional and personal life in the electronic forms of communication (e-mail, sms, voice, audio and video blogs, social networks, etc.. Purpose: The purpose of the article is to describe the theoretical and practical framework of the project "Communicative-pragmatic and discourse-grammatical lingvopersonology: structuring linguistic identity and computer modeling". The description of key techniques is given, such as machine learning for language modeling, speech synthesis, handwriting simulation. Results: Lingvopersonology developed some great theoretical foundations, its methods, tools, and significant achievements let us predict that the newest promising trend is a linguistic identity modeling by means of information technology, including language. We see three aspects of the modeling: 1 modeling the semantic level of linguistic identity – by means of the use of corpus linguistics; 2 sound level formal modeling of linguistic identity – with the help of speech synthesis; 3 formal graphic level modeling of linguistic identity – with the help of image synthesis (handwriting. For the first case, we suppose to use machine learning technics and vector-space (word2vec algorithm for textual speech modeling. Hybrid CUTE method for personality speech modeling will be applied to the second case. Finally, trained with the person handwriting images neural network can be an instrument for the last case. Discussion: The project "Communicative-pragmatic, discourse, and grammatical lingvopersonology: structuring linguistic identity and computer modeling", which is implementing by the Department of General and Applied Linguistics and Slavonic philology, selected a task to model Yuriy Shevelyov (Sherekh

  11. Variational description of multifluid hydrodynamics: Uncharged fluids

    Science.gov (United States)

    Prix, Reinhard

    2004-02-01

    We present a formalism for Newtonian multifluid hydrodynamics derived from an unconstrained variational principle. This approach provides a natural way of obtaining the general equations of motion for a wide range of hydrodynamic systems containing an arbitrary number of interacting fluids and superfluids. In addition to spatial variations we use “time shifts” in the variational principle, which allows us to describe dissipative processes with entropy creation, such as chemical reactions, friction or the effects of external non-conservative forces. The resulting framework incorporates the generalization of the entrainment effect originally discussed in the case of the mixture of two superfluids by Andreev and Bashkin. In addition to the conservation of energy and momentum, we derive the generalized conservation laws of vorticity and helicity, and the special case of Ertel’s theorem for the single perfect fluid. We explicitly discuss the application of this framework to thermally conducting fluids, superfluids, and superfluid neutron star matter. The equations governing thermally conducting fluids are found to be more general than the standard description, as the effect of entrainment usually seems to be overlooked in this context. In the case of superfluid 4He we recover the Landau-Khalatnikov equations of the two-fluid model via a translation to the “orthodox” framework of superfluidity, which is based on a rather awkward choice of variables. Our two-fluid model for superfluid neutron star matter allows for dissipation via mutual friction and also “transfusion” via β reactions between the neutron fluid and the proton-electron fluid.

  12. Database Description - JSNP | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available base Description General information of database Database name JSNP Alternative nam...n Science and Technology Agency Creator Affiliation: Contact address E-mail : Database...sapiens Taxonomy ID: 9606 Database description A database of about 197,000 polymorphisms in Japanese populat...1):605-610 External Links: Original website information Database maintenance site Institute of Medical Scien...er registration Not available About This Database Database Description Download License Update History of This Database

  13. Database Description - ASTRA | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available abase Description General information of database Database name ASTRA Alternative n...tics Journal Search: Contact address Database classification Nucleotide Sequence Databases - Gene structure,...3702 Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description The database represents classified p...(10):1211-6. External Links: Original website information Database maintenance site National Institute of Ad... for user registration Not available About This Database Database Description Dow

  14. Database Description - PSCDB | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available abase Description General information of database Database name PSCDB Alternative n...rial Science and Technology (AIST) Takayuki Amemiya E-mail: Database classification Structure Databases - Protein structure Database...554-D558. External Links: Original website information Database maintenance site Graduate School of Informat...available URL of Web services - Need for user registration Not available About This Database Database Descri...ption Download License Update History of This Database Site Policy | Contact Us Database Description - PSCDB | LSDB Archive ...

  15. Qualitative description – the poor cousin of health research?

    OpenAIRE

    Sondergaard Jens; Andersen Rikke; Olesen Frede; Neergaard Mette

    2009-01-01

    Abstract Background The knowledge and use of qualitative description as a qualitative research approach in health services research is limited. The aim of this article is to discuss the potential benefits of a qualitative descriptive approach, to identify its strengths and weaknesses and to provide examples of use. Discussion Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed m...

  16. Patient safety in otolaryngology: a descriptive review.

    Science.gov (United States)

    Danino, Julian; Muzaffar, Jameel; Metcalfe, Chris; Coulson, Chris

    2017-03-01

    Human evaluation and judgement may include errors that can have disastrous results. Within medicine and healthcare there has been slow progress towards major changes in safety. Healthcare lags behind other specialised industries, such as aviation and nuclear power, where there have been significant improvements in overall safety, especially in reducing risk of errors. Following several high profile cases in the USA during the 1990s, a report titled "To Err Is Human: Building a Safer Health System" was published. The report extrapolated that in the USA approximately 50,000 to 100,000 patients may die each year as a result of medical errors. Traditionally otolaryngology has always been regarded as a "safe specialty". A study in the USA in 2004 inferred that there may be 2600 cases of major morbidity and 165 deaths within the specialty. MEDLINE via PubMed interface was searched for English language articles published between 2000 and 2012. Each combined two or three of the keywords noted earlier. Limitations are related to several generic topics within patient safety in otolaryngology. Other areas covered have been current relevant topics due to recent interest or new advances in technology. There has been a heightened awareness within the healthcare community of patient safety; it has become a major priority. Focus has shifted from apportioning blame to prevention of the errors and implementation of patient safety mechanisms in healthcare delivery. Type of Errors can be divided into errors due to action and errors due to knowledge or planning. In healthcare there are several factors that may influence adverse events and patient safety. Although technology may improve patient safety, it also introduces new sources of error. The ability to work with people allows for the increase in safety netting. Team working has been shown to have a beneficial effect on patient safety. Any field of work involving human decision-making will always have a risk of error. Within

  17. Integrated Environmental Modelling: Human decisions, human challenges

    Science.gov (United States)

    Glynn, Pierre D.

    2015-01-01

    Integrated Environmental Modelling (IEM) is an invaluable tool for understanding the complex, dynamic ecosystems that house our natural resources and control our environments. Human behaviour affects the ways in which the science of IEM is assembled and used for meaningful societal applications. In particular, human biases and heuristics reflect adaptation and experiential learning to issues with frequent, sharply distinguished, feedbacks. Unfortunately, human behaviour is not adapted to the more diffusely experienced problems that IEM typically seeks to address. Twelve biases are identified that affect IEM (and science in general). These biases are supported by personal observations and by the findings of behavioural scientists. A process for critical analysis is proposed that addresses some human challenges of IEM and solicits explicit description of (1) represented processes and information, (2) unrepresented processes and information, and (3) accounting for, and cognizance of, potential human biases. Several other suggestions are also made that generally complement maintaining attitudes of watchful humility, open-mindedness, honesty and transparent accountability. These suggestions include (1) creating a new area of study in the behavioural biogeosciences, (2) using structured processes for engaging the modelling and stakeholder communities in IEM, and (3) using ‘red teams’ to increase resilience of IEM constructs and use.

  18. Database Description - SAHG | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available base Description General information of database Database name SAHG Alternative nam...h: Contact address Chie Motono Tel : +81-3-3599-8067 E-mail : Database classification Structure Databases - ...e databases - Protein properties Organism Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database description... Links: Original website information Database maintenance site The Molecular Profiling Research Center for D...stration Not available About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Database Description - SAHG | LSDB Archive ...

  19. Feedback produces divergence from prospect theory in descriptive choice.

    Science.gov (United States)

    Jessup, Ryan K; Bishara, Anthony J; Busemeyer, Jerome R

    2008-10-01

    A recent study demonstrated that individuals making experience-based choices underweight small probabilities, in contrast to the overweighting observed in a typical descriptive paradigm. We tested whether trial-by-trial feedback in a repeated descriptive paradigm would engender choices more correspondent with experiential or descriptive paradigms. The results of a repeated gambling task indicated that individuals receiving feedback underweighted small probabilities, relative to their no-feedback counterparts. These results implicate feedback as a critical component during the decision-making process, even in the presence of fully specified descriptive information. A model comparison at the individual-subject level suggested that feedback drove individuals' decision weights toward objective probability weighting.

  20. The problem of arriving at a phenomenological description of memory loss.

    Science.gov (United States)

    Moyle, W; Clinton, M

    1997-07-01

    This paper discusses a methodological difficulty that arose when uncovering the conscious experience of being nurtured as an in-patient with depression on a psychiatric ward. It considers the problem of arriving at a phenomenological description of memory loss in a patient who had undergone electroconvulsive therapy (ECT). The paper begins by describing the prevalence of depression and its significance for nurses working in in-patient settings. Examples of empirical research into memory loss in depression are used to show what researchers must set aside if they are to arrive at a phenomenological description of memory loss. The choice of a phenomenological approach to the wider study from which the methodological problem discussed here arose is then justified. The phenomena of memory is introduced to show the methodological significance of attempting to arrive at a phenomenological description of the statement made by one of the participants, a woman being treated as an in-patient for major depression. A possible description of the phenomena of memory loss based on the existential phenomenology of Sartre is offered to call into question the ability of researchers to bracket their assumptions. The significance for nurses of the wider study from which our example is taken is then described. Finally it is argued that despite the methodological difficulty described, a phenomenological perspective based on the philosophy of Husserl can point nurses in the direction of meeting the human needs of their patients.

  1. Pain perception description after advanced surface ablation

    Directory of Open Access Journals (Sweden)

    Sobas EM

    2017-04-01

    Full Text Available Eva M Sobas,1,2 Sebastián Videla,3,4 Amanda Vázquez,1 Itziar Fernández,1,5 Miguel J Maldonado,1 José-Carlos Pastor1,6,7 1Instituto Universitario de Oftalmobiología Aplicada (IOBA, Universidad de Valladolid, Valladolid, Spain; 2Facultad de Enfermería, Universidad de Valladolid, Valladolid Spain; 3Laboratorios Dr. Esteve S.A., Barcelona, Spain; 4Department of Experimental and Health Sciences, Facultad de Ciencias de la Salud y de la Vida, Universidad Pompeu Fabra, Barcelona, Spain; 5Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN, Valladolid, Spain; 6Department of Ophthalmology, Hospital Clínico Universitario, Valladolid, Spain; 7Department of Surgery, Ophthalmology, Otorhinolaryngology and Physiotherapy, Facultad de Medicina, Universidad de Valladolid, Valladolid, Spain Purpose: The objective of this study was to characterize the evolution of ocular pain after advanced surface ablation (ASA to improve strategies in postoperative pain management.Methods: This was a multicenter, prospective, descriptive, cohort study. The inclusion criteria were healthy individuals ≥18 years old receiving bilateral alcohol-assisted surface ablation with epithelial removal. Pain intensity was evaluated with the visual analog scale (VAS and the numeric pain rating scale before and after surgery. Comorbidities (photophobia, burning, tearing, and foreign body sensation and Hospital Anxiety and Depression (HAD questionnaire were evaluated before and at 6 hours after surgery. Postoperative treatments included cold patch, topical cold antibiotics, topical steroids, and benzodiazepines.Results: Thirty-two consecutive patients having similar profiles of postoperative pain evolution were included. At 0.5 hour after ASA, the pain score by VAS was 37±20 mm, and the maximum pain, 61±31 mm, occurred at 24 hours. Afterward, it decreased progressively until 72 hours after surgery (19±20 mm. Most patients (81% scored >60 mm, and

  2. Metadata for the description of broadcast assets

    DEFF Research Database (Denmark)

    Efthimiadis, Efthimis N.; Mai, Jens Erik; Burrows, Paul E.

    2003-01-01

    The Corporation for Public Broadcasting (CPB) and public broadcasters consider Media Asset Management (MAM) of critical importance since without a concerted and cooperative plan to manage their vast library of content, broadcasters are unable to reach their potential for service in the digital age....... The concerns for Media Asset Management, human and technical, are myriad. Media Asset Management is the framework upon which many of the largest technology projects will be built, including the future interconnection system between and among CPB member stations. It is CPB's hope that its licensees...... and their partners in university, museum, and library communities, will work together to contribute to Media Asset Management solutions. These issues are not unique to Public Broadcasters. Similar issues are faced by all networks at different levels of complexity. This panel will present efforts by broadcasters...

  3. A Molecular Description of Cellulose Biosynthesis

    Science.gov (United States)

    McNamara, Joshua T.; Morgan, Jacob L.W.; Zimmer, Jochen

    2016-01-01

    Cellulose is the most abundant biopolymer on Earth, and certain organisms from bacteria to plants and animals synthesize cellulose as an extracellular polymer for various biological functions. Humans have used cellulose for millennia as a material and an energy source, and the advent of a lignocellulosic fuel industry will elevate it to the primary carbon source for the burgeoning renewable energy sector. Despite the biological and societal importance of cellulose, the molecular mechanism by which it is synthesized is now only beginning to emerge. On the basis of recent advances in structural and molecular biology on bacterial cellulose synthases, we review emerging concepts of how the enzymes polymerize glucose molecules, how the nascent polymer is transported across the plasma membrane, and how bacterial cellulose biosynthesis is regulated during biofilm formation. Additionally, we review evolutionary commonalities and differences between cellulose synthases that modulate the nature of the cellulose product formed. PMID:26034894

  4. Reference Design Description for a Geologic Repository

    International Nuclear Information System (INIS)

    2000-01-01

    One of the current major national environmental problems is the safe disposal of large quantities of spent nuclear fuel and high-level radioactive waste materials, which are rapidly accumulating throughout the country. These radioactive byproducts are generated as the result of national defense activities and from the generation of electricity by commercial nuclear power plants. At present, spent nuclear fuel is accumulating at over 70 power plant sites distributed throughout 33 states. The safe disposal of these high-level radioactive materials at a central disposal facility is a high national priority. This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada for the disposal of spent nuclear fuel and high-level radioactive waste materials. This document describes a possible design for the three fundamental parts of a repository: a surface facility, subsurface repository, and waste packaging. It also presents the current conceptual design of the key engineering systems for the final four phases of repository processes: operations, monitoring, closure, and postclosure. In accordance with current law, this design does not include an interim storage option. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. It describes the natural barrier system which, together with the engineered systems, achieves the repository objectives. This design will protect the public and the environment by allowing the safe disposal of radioactive waste received from government-owned custodial spent fuel sites, high-level radioactive waste sites, and commercial power reactor sites. All design elements meet or exceed applicable regulations governing the disposal of high-level radioactive waste. The design will provide safe disposal of waste materials for at least a 10,000 year period. During this time interval, natural radioactive decay

  5. Oral and Written Picture Description in Individuals with Aphasia

    Science.gov (United States)

    Vandenborre, Dorien; Visch-Brink, Evy; van Dun, Kim; Verhoeven, Jo; Mariën, Peter

    2018-01-01

    Background: Aphasia is characterized by difficulties in connected speech/writing. Aims: To explore the differences between the oral and written description of a picture in individuals with chronic aphasia (IWA) and healthy controls. Descriptions were controlled for productivity, efficiency, grammatical organization, substitution behaviour and…

  6. Domain Endurants: An Analysis and Description Process Model

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2014-01-01

    We present a summary, Sect. 2, of a structure of domain analysis and description concepts: techniques and tools. And we link, in Sect. 3, these concepts, embodied in domain analysis prompts and domain description prompts, in a model of how a diligent domain analyser cum describer would use them. We...

  7. How descriptive menu labels influence attitudes and repatronage

    NARCIS (Netherlands)

    Wansink, B.; Painter, J.; Ittersum, van K.

    2002-01-01

    How do descriptive menu labels influence customers? In a six-week field experiment involving 140 customers, descriptive menu labels (such as "Grandma's zucchini cookies" or "succulent Italian seafood filet") increased sales by 27% and improved attitudes towards the food, attitudes towards the

  8. Concept of APDL, the atomic process description language

    International Nuclear Information System (INIS)

    Sasaki, Akira

    2004-01-01

    The concept of APDL, the Atomic Process Description Language, which provides simple and complete description of atomic model is presented. The syntax to describe electron orbital and configuration is defined for the use in the atomic structure, kinetics and spectral synthesis simulation codes. (author)

  9. 8 CFR 333.1 - Description of required photographs.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Description of required photographs. 333.1 Section 333.1 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS PHOTOGRAPHS § 333.1 Description of required photographs. (a) Every applicant required to furnish photographs of...

  10. Exploring Teacher Strategies in Teaching Descriptive Writing in Indonesia

    Science.gov (United States)

    Suriyanti, Sufatmi; Yaacob, Aizan

    2016-01-01

    Purpose: This paper is the outcome of a study which examined teacher strategies in teaching descriptive writing to junior high school students in Delitua, North Sumatra, Indonesia. The study was based on two questions: 1) What are the teaching strategies used by EFL teachers in teaching descriptive writing? 2) To what extent did the descriptive…

  11. 24 CFR 110.25 - Description of posters.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Description of posters. 110.25... HOUSING FAIR HOUSING POSTER Requirements for Display of Posters § 110.25 Description of posters. (a) The fair housing poster shall be 11 inches by 14 inches and shall bear the following legend: EC12OC91.008...

  12. Formal description of the OSI session layer: introduction

    NARCIS (Netherlands)

    Ajubi, I.; Scollo, Giuseppe; van Sinderen, Marten J.; van Eijk, P.H.J.; Vissers, C.A.; Diaz, M.

    1989-01-01

    The LOTOS formal description of the OSI session layer is introduced with the purpose of familiarizing the reader with the design choices that influenced the development of the formal description. Such design choices concern the adoptation of specification styles and the reflection of elements of the

  13. A paradox in the global description of the multiverse

    Energy Technology Data Exchange (ETDEWEB)

    Bousso, Raphael [Center for Theoretical Physics, Department of Physics, University of California, Berkeley, CA 94720-7300 (United States); Freivogel, Ben [Center for Theoretical Physics, Department of Physics, University of California, Berkeley, CA 94720-7300 (United States)

    2007-06-15

    We use an argument by Page to exhibit a paradox in the global description of the multiverse: the overwhelming majority of observers arise from quantum fluctuations and not by conventional evolution. Unless we are extremely atypical, this contradicts observation. The paradox does not arise in the local description of the multiverse, but similar arguments yield interesting constraints on the maximum lifetime of metastable vacua.

  14. A paradox in the global description of the multiverse

    International Nuclear Information System (INIS)

    Bousso, Raphael; Freivogel, Ben

    2007-01-01

    We use an argument by Page to exhibit a paradox in the global description of the multiverse: the overwhelming majority of observers arise from quantum fluctuations and not by conventional evolution. Unless we are extremely atypical, this contradicts observation. The paradox does not arise in the local description of the multiverse, but similar arguments yield interesting constraints on the maximum lifetime of metastable vacua

  15. Normative and Descriptive Aspects of Management Education: Differentiation and Integration

    Science.gov (United States)

    Meirovich, Gavriel

    2015-01-01

    This study advocates strongly for clear differentiation and synthesis of descriptive and normative approaches in management education. There is a certain isolation of normative and descriptive theoretical frameworks presented in management courses. Normative frameworks in management explain how organizations "should be" managed, while…

  16. Description, prescription and the choice of discount rates

    International Nuclear Information System (INIS)

    Baum, Seth D.

    2009-01-01

    The choice of discount rates is a key issue in the analysis of long-term societal issues, in particular environmental issues such as climate change. Approaches to choosing discount rates are generally placed into two categories: the descriptive approach and the prescriptive approach. The descriptive approach is often justified on grounds that it uses a description of how society discounts instead of having analysts impose their own discounting views on society. This paper analyzes the common forms of the descriptive and prescriptive approaches and finds that, in contrast with customary thinking, both forms are equally descriptive and prescriptive. The prescriptions concern who has standing (i.e. who is included) in society, how the views of these individuals are measured, and how the measurements are aggregated. Such prescriptions are necessary to choose from among the many possible descriptions of how society discounts. The descriptions are the measurements made given a choice of measurement technique. Thus, the labels 'descriptive approach' and 'prescriptive approach' are deeply misleading, as analysts cannot avoid imposing their own views on society. (author)

  17. Discourse Model Representation of Referential and Attributive Descriptions.

    Science.gov (United States)

    Onishi, Kristine H.; Murphy, Gregory L.

    2002-01-01

    Manipulated shared knowledge and focus on specific entities, the verb in the sentence, and whether the description was definite or indefinite. Each factor influenced interpretation of the description. Confirmed that changing verbs alone affected reference choice. Indicated that both referentially and attributively introduced entities are…

  18. The development of mobile computation and the related formal description

    International Nuclear Information System (INIS)

    Jin Yan; Yang Xiaozong

    2003-01-01

    The description and research for formal representation in mobile computation, which is very instructive to resolve the status transmission, domain administration, authentication. This paper presents the descriptive communicating process and computational process from the view of formal calculus, what's more, it construct a practical application used by mobile ambient. Finally, this dissertation shows the future work and direction. (authors)

  19. Adding Curvature to Minimum Description Length Shape Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik; Ólafsdóttir, Hildur

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling seeks a compact description of a set of shapes in terms of the coordinates of marks on the shapes. It has been shown that the mark positions resulting from this optimisation to a large extent solve the so-called point correspondence...

  20. 48 CFR 214.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

  1. 31 CFR 601.2 - Description of paper.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Description of paper. 601.2 Section... ENGRAVING AND PRINTING, DEPARTMENT OF THE TREASURY DISTINCTIVE PAPER FOR UNITED STATES CURRENCY AND OTHER SECURITIES § 601.2 Description of paper. The paper utilized in the printing of United States currency and...

  2. 46 CFR Sec. 2 - Description of NSA-WORKSMALREP Contract.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Description of NSA-WORKSMALREP Contract. Sec. 2 Section... REPAIRS-NSA-WORKSMALREP Sec. 2 Description of NSA-WORKSMALREP Contract. This is an individual fixed price contract which may be awarded to any firm not holding an NSA-LUMPSUMREP Contract, as a result of formal...

  3. The International Classification of Functioning, Disability and Health (ICF): a unifying model for the conceptual description of the rehabilitation strategy.

    Science.gov (United States)

    Stucki, Gerold; Cieza, Alarcos; Melvin, John

    2007-05-01

    An important basis for the successful development of rehabilitation practice and research is a conceptually sound description of rehabilitation understood as a health strategy based on a universally accepted conceptual model and taxonomy of human functioning. With the approval of the International Classification of Functioning, Disability and Health (ICF) by the World Health Assembly in 2001 and the reference to the ICF in the World Health Assembly's resolution on "Disability, including prevention, management and rehabilitation" in 2005, we can now rely on a universally accepted conceptual model. It is thus time to initiate the process of evolving an ICF-based conceptual description that can serve as a basis for similar conceptual descriptions and according definitions of the professions applying the rehabilitation strategy and of distinct scientific fields of human functioning and rehabilitation research. In co-operation with the Physical and Rehabilitation Medicine (PRM) section of the European Union of Medical Specialists (UEMS) and its professional practice committee, we present a first tentative version of an ICF-based conceptual description in this paper. A brief definition describes rehabilitation as the health strategy applied by PRM and professionals in the health sector and across other sectors that aims to enable people with health conditions experiencing or likely to experience disability to achieve and maintain optimal functioning in interaction with the environment. Readers of the Journal of Rehabilitation Medicine are invited to contribute towards achieving an internationally accepted ICF-based conceptual description of rehabilitation by submitting commentaries to the Editor of this journal.

  4. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2008-12-01

    assessment is provided with a tool to predict how and where radionuclides are transported and accumulated in the landscape, making it possible to calculate potential doses to humans and other biota for the specific site. In the terrestrial landscape at Forsmark, many of the vegetation types are sinks for organic matter. The largest sink is the vegetation itself, but also the soil accumulates organic material, although in smaller quantities. The exception is the wetlands that are of significant importance for accumulation of organic matter and other elements, such as phosphorus, in the soil organic pool. In particular, the reed-dominated wetlands surrounding many of the lakes accumulate large amounts of organic matter and associated elements. The most important inflow of elements to lakes is via water from the terrestrial areas. The larger lakes at Forsmark are, similar to the wetlands, important sites for accumulation of organic matter and many other elements, whereas some of the smaller lakes probably function more as flow-through systems. Transport from land, lakes and streams gives only a minor contribution of organic matter to the marine ecosystem. The major fluxes of organic matter in the marine ecosystem are instead governed by advective water fluxes. The resulting description of dominating pools and fluxes in the different ecosystems makes it possible to assess the relative importance of different processes for the transport and accumulation of various elements and substances, including radionuclides, within and between ecosystems. This description constitutes, together with the site-specific quantifications of important properties and processes in different parts of the surface system presented in this report and in a number of discipline-specific background reports, a comprehensive basis for the modelling of radioactive dose to humans and to other biota in the safety assessment

  5. DOE-RL Integrated Safety Management System Description

    International Nuclear Information System (INIS)

    SHOOP, D.S.

    2000-01-01

    The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions

  6. The relationship between symbolic interactionism and interpretive description.

    Science.gov (United States)

    Oliver, Carolyn

    2012-03-01

    In this article I explore the relationship between symbolic interactionist theory and interpretive description methodology. The two are highly compatible, making symbolic interactionism an excellent theoretical framework for interpretive description studies. The pragmatism underlying interpretive description supports locating the methodology within this cross-disciplinary theory to make it more attractive to nonnursing researchers and expand its potential to address practice problems across the applied disciplines. The theory and method are so compatible that symbolic interactionism appears to be part of interpretive description's epistemological foundations. Interpretive description's theoretical roots have, to date, been identified only very generally in interpretivism and the philosophy of nursing. A more detailed examination of its symbolic interactionist heritage furthers the contextualization or forestructuring of the methodology to meet one of its own requirements for credibility.

  7. DOE-RL Integrated Safety Management System Description

    CERN Document Server

    Shoop, D S

    2000-01-01

    The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

  8. A description of LUSTRA's common field sites

    International Nuclear Information System (INIS)

    Berggren, Dan; Bergkvist, Bo; Johansson, Maj-Britt; Melkerud, Per-Arne; Nilsson, Aake; Olsson, Mats; Langvall, Ola; Majdi, Hooshang; Weslien, Per

    2004-01-01

    arena, and thus LUSTRA has gradually put more focus on the Kyoto process. LUSTRA was evaluated during spring 2002 and the general overall statement was that 'The ambitious goals of the LUSTRA program are very good and seem to be well understood by the participating researchers. However, for a second phase a focus on synthesis and synergy is recommended'. In LUSTRA we are performing integrated research on C fluxes at three common field sites (CFS) situated in a south-north transect in Sweden: Asa, Knottaasen and Flakaliden. Measurements started summer 2000. The intention was to establish a climate gradient through Sweden but keep other environmental parameters rather similar. Also within each site the ambition was to get a hydrological gradient going from dry, over mesic to moist conditions, i.e. from deep lying ground water level to shallow groundwater. According to the advises by the reviewers of LUSTRA phase 1, more focus will be on syntheses during LUSTRA phase 2 (2003-2006). However, measurements at the CFS will be continued during 2003 and 2004. The objectives of this paper are (i) to give a general description of the sites, (ii) to describe the abiotic measurements made at the different sites, including the data base, (iii) to describe the methods used to obtain background information about soils and vegetation (C pools and fluxes) and (iv) to present the background information about soils and vegetation

  9. Issues in Developing a Normative Descriptive Model for Dyadic Decision Making

    Science.gov (United States)

    Serfaty, D.; Kleinman, D. L.

    1984-01-01

    Most research in modelling human information processing and decision making has been devoted to the case of the single human operator. In the present effort, concepts from the fields of organizational behavior, engineering psychology, team theory and mathematical modelling are merged in an attempt to consider first the case of two cooperating decisionmakers (the Dyad) in a multi-task environment. Rooted in the well-known Dynamic Decision Model (DDM), the normative descriptive approach brings basic cognitive and psychophysical characteristics inherent to human behavior into a team theoretic analytic framework. An experimental paradigm, involving teams in dynamic decision making tasks, is designed to produce the data with which to build the theoretical model.

  10. AutoBD: Automated Bi-Level Description for Scalable Fine-Grained Visual Categorization.

    Science.gov (United States)

    Yao, Hantao; Zhang, Shiliang; Yan, Chenggang; Zhang, Yongdong; Li, Jintao; Tian, Qi

    Compared with traditional image classification, fine-grained visual categorization is a more challenging task, because it targets to classify objects belonging to the same species, e.g. , classify hundreds of birds or cars. In the past several years, researchers have made many achievements on this topic. However, most of them are heavily dependent on the artificial annotations, e.g., bounding boxes, part annotations, and so on . The requirement of artificial annotations largely hinders the scalability and application. Motivated to release such dependence, this paper proposes a robust and discriminative visual description named Automated Bi-level Description (AutoBD). "Bi-level" denotes two complementary part-level and object-level visual descriptions, respectively. AutoBD is "automated," because it only requires the image-level labels of training images and does not need any annotations for testing images. Compared with the part annotations labeled by the human, the image-level labels can be easily acquired, which thus makes AutoBD suitable for large-scale visual categorization. Specifically, the part-level description is extracted by identifying the local region saliently representing the visual distinctiveness. The object-level description is extracted from object bounding boxes generated with a co-localization algorithm. Although only using the image-level labels, AutoBD outperforms the recent studies on two public benchmark, i.e. , classification accuracy achieves 81.6% on CUB-200-2011 and 88.9% on Car-196, respectively. On the large-scale Birdsnap data set, AutoBD achieves the accuracy of 68%, which is currently the best performance to the best of our knowledge.Compared with traditional image classification, fine-grained visual categorization is a more challenging task, because it targets to classify objects belonging to the same species, e.g. , classify hundreds of birds or cars. In the past several years, researchers have made many achievements on this topic

  11. Fungal Planet description sheets: 400-468.

    Science.gov (United States)

    Crous, P W; Wingfield, M J; Richardson, D M; Le Roux, J J; Strasberg, D; Edwards, J; Roets, F; Hubka, V; Taylor, P W J; Heykoop, M; Martín, M P; Moreno, G; Sutton, D A; Wiederhold, N P; Barnes, C W; Carlavilla, J R; Gené, J; Giraldo, A; Guarnaccia, V; Guarro, J; Hernández-Restrepo, M; Kolařík, M; Manjón, J L; Pascoe, I G; Popov, E S; Sandoval-Denis, M; Woudenberg, J H C; Acharya, K; Alexandrova, A V; Alvarado, P; Barbosa, R N; Baseia, I G; Blanchette, R A; Boekhout, T; Burgess, T I; Cano-Lira, J F; Čmoková, A; Dimitrov, R A; Dyakov, M Yu; Dueñas, M; Dutta, A K; Esteve-Raventós, F; Fedosova, A G; Fournier, J; Gamboa, P; Gouliamova, D E; Grebenc, T; Groenewald, M; Hanse, B; Hardy, G E St J; Held, B W; Jurjević, Ž; Kaewgrajang, T; Latha, K P D; Lombard, L; Luangsa-Ard, J J; Lysková, P; Mallátová, N; Manimohan, P; Miller, A N; Mirabolfathy, M; Morozova, O V; Obodai, M; Oliveira, N T; Ordóñez, M E; Otto, E C; Paloi, S; Peterson, S W; Phosri, C; Roux, J; Salazar, W A; Sánchez, A; Sarria, G A; Shin, H-D; Silva, B D B; Silva, G A; Smith, M Th; Souza-Motta, C M; Stchigel, A M; Stoilova-Disheva, M M; Sulzbacher, M A; Telleria, M T; Toapanta, C; Traba, J M; Valenzuela-Lopez, N; Watling, R; Groenewald, J Z

    2016-06-01

    ), Ochroconis dracaenae (on Dracaena reflexa), Rasamsonia columbiensis (air of a hotel conference room), Paecilomyces tabacinus (on Nicotiana tabacum), Toxicocladosporium hominis (from human broncoalveolar lavage fluid), Nothophoma macrospora (from respiratory secretion of a patient with pneumonia), and Penidiellopsis radicularis (incl. Penidiellopsis gen. nov.) from a human nail. Novel taxa described from Malaysia include Prosopidicola albizziae (on Albizzia falcataria), Proxipyricularia asari (on Asarum sp.), Diaporthe passifloricola (on Passiflora foetida), Paramycoleptodiscus albizziae (incl. Paramycoleptodiscus gen. nov.) on Albizzia falcataria, and Malaysiasca phaii (incl. Malaysiasca gen. nov.) on Phaius reflexipetalus. Two species are newly described from human patients in the Czech Republic, namely Microascus longicollis (from toenails of patient with suspected onychomycosis), and Chrysosporium echinulatum (from sole skin of patient). Furthermore, Alternaria quercicola is described on leaves of Quercus brantii (Iran), Stemphylium beticola on leaves of Beta vulgaris (The Netherlands), Scleroderma capeverdeanum on soil (Cape Verde Islands), Scleroderma dunensis on soil, and Blastobotrys meliponae from bee honey (Brazil), Ganoderma mbrekobenum on angiosperms (Ghana), Geoglossum raitviirii and Entoloma kruticianum on soil (Russia), Priceomyces vitoshaensis on Pterostichus melas (Carabidae) (Bulgaria) is the only one for which the family is listed, Ganoderma ecuadoriense on decaying wood (Ecuador), Thyrostroma cornicola on Cornus officinalis (Korea), Cercophora vinosa on decorticated branch of Salix sp. (France), Coprinus pinetorum, Coprinus littoralis and Xerocomellus poederi on soil (Spain). Two new genera from Colombia include Helminthosporiella and Uwemyces on leaves of Elaeis oleifera. Two species are described from India, namely Russula intervenosa (ectomycorrhizal with Shorea robusta), and Crinipellis odorata (on bark of Mytragyna parviflora). Novelties from Thailand

  12. Descriptions and models of safety functions - a prestudy

    International Nuclear Information System (INIS)

    Harms-Ringdahl, L.

    1999-09-01

    A study has been made with the focus on different theories and applications concerning 'safety functions' and 'barriers'. In this report, a safety function is defined as a technical or organisational function with the aim to reduce probability and/or consequences associated with a hazard. The study contains a limited review of practice and theories related to safety, with a focus on applications from nuclear and industrial safety. The study is based on a literature review and interviews. A summary has been made of definitions and terminology, which shows a large variation. E.g. 'barrier' can have a precise physical and technical meaning, or it can include human, technical and organisational elements. Only a few theoretical models describing safety functions have been found. One section of the report summarises problems related to safety issues and procedures. They concern errors in procedure design and user compliance. A proposal for describing and structuring safety functions has been made. Dimensions in a description could be degree of abstraction, systems level, the different parts of the function, etc. A model for safety functions has been proposed, which includes the division of a safety function in a number connected 'safety function elements'. One conclusion is that there is a potential for improving theories and tools for safety work and procedures. Safety function could be a useful concept in such a development, and advantages and disadvantages with this is discussed. If further work should be done, it is recommended that this is made as a combination of theoretical analysis and case studies

  13. Generating Contextual Descriptions of Virtual Reality (VR) Spaces

    Science.gov (United States)

    Olson, D. M.; Zaman, C. H.; Sutherland, A.

    2017-12-01

    Virtual reality holds great potential for science communication, education, and research. However, interfaces for manipulating data and environments in virtual worlds are limited and idiosyncratic. Furthermore, speech and vision are the primary modalities by which humans collect information about the world, but the linking of visual and natural language domains is a relatively new pursuit in computer vision. Machine learning techniques have been shown to be effective at image and speech classification, as well as at describing images with language (Karpathy 2016), but have not yet been used to describe potential actions. We propose a technique for creating a library of possible context-specific actions associated with 3D objects in immersive virtual worlds based on a novel dataset generated natively in virtual reality containing speech, image, gaze, and acceleration data. We will discuss the design and execution of a user study in virtual reality that enabled the collection and the development of this dataset. We will also discuss the development of a hybrid machine learning algorithm linking vision data with environmental affordances in natural language. Our findings demonstrate that it is possible to develop a model which can generate interpretable verbal descriptions of possible actions associated with recognized 3D objects within immersive VR environments. This suggests promising applications for more intuitive user interfaces through voice interaction within 3D environments. It also demonstrates the potential to apply vast bodies of embodied and semantic knowledge to enrich user interaction within VR environments. This technology would allow for applications such as expert knowledge annotation of 3D environments, complex verbal data querying and object manipulation in virtual spaces, and computer-generated, dynamic 3D object affordances and functionality during simulations.

  14. Neoplasm carcinoid: Description of a case

    International Nuclear Information System (INIS)

    Carrillo, Luis; Abarca, Jaysoom; Penaherrera, Vicente; Legarda, Eduardo

    2004-01-01

    We describe a case of small bowel obstruction associated with a carcinoid neoplasm of the ileum in a 78 year old man who was presented with abdominal pain, vomiting, and a mass in right lower quadrant. Carcinoids are neuroendocrine neoplasm originating in multiple locations throughout the body human. About 75% of such neoplasm are located within the gastrointestinal tract and are capable of rpoducing various peptides. Their clinical course is often indolent but can also be aggressive and resistant to therapy. The incidence of these tumours is approximately 2.5 in 100.000 people per year. The former classification system of fore gut, midgut and hind gut tumors is still used in clinical routine. Determination of the histopathology of carcinoid tumors is of utmost importance and involves specific immunohistochemical staining for chromogranin A, synaptophysin, serotonin and gastrin. New localization procedures include somatostatin receptor scintigraphy and positron emission tomography. Surgery remains the cornerstone of treatment and provides the only chance of a cure. Other cytoreductive procedures include radiofrequency ablation, laser treatment and chemo embolization. New therapies, such as ling acting somatostatin analogs, together with further development of tumor targeted treatments, will come into clinical use in the near future. (The author)

  15. ARIES: Further description of its assessment process

    International Nuclear Information System (INIS)

    Rabago, I.; Sierra, I.; Vidania, R.

    1993-01-01

    ARIES is an integrated system designed in order to facilitate the effects assessment produced by accidental release of toxic chemicals. ARIES has been developed for inhalation exposures to estimate short term consequences over the exposed population. ARIES works with mathematical algorithms and is complemented with an additional system that executes the selection of relevant information, giving and additional support to the assessment. ARIES Methodology is based, on one side, in the development of a system of mathematical models joint sequentially in order to obtain a quick answer about the severity of the expected human effects as a function of the toxic concentration released to the environment (Quantitative process), and on the other side in the analysis and optimisation of the contrasted existing information about chemicals toxicity (Qualitative process). Both processes are sequential and complementary. ARIES methodology is physically supported by an informatic system. ARIES works with relational databases and mathematical algorithms programmed in dbase/sql language which let relate the above process, and furthermore add or incorporate progressively new models or complementary information. It has been developed a first prototype PC's of ARIES including several products of 82/505/EEC Directive. In a previous report we described the systems as a whole, and specially, their qualitative step. This report is directed to describe the quantitative assessment process of the system, specifically those aspects included in the present version of the prototype. Developed parts of quantitative steps are designed for situations in which only basic data like TLV's, DL, etc., are available for the assessment

  16. Fungal Planet description sheets: 320-370.

    Science.gov (United States)

    Crous, P W; Wingfield, M J; Guarro, J; Hernández-Restrepo, M; Sutton, D A; Acharya, K; Barber, P A; Boekhout, T; Dimitrov, R A; Dueñas, M; Dutta, A K; Gené, J; Gouliamova, D E; Groenewald, M; Lombard, L; Morozova, O V; Sarkar, J; Smith, M Th; Stchigel, A M; Wiederhold, N P; Alexandrova, A V; Antelmi, I; Armengol, J; Barnes, I; Cano-Lira, J F; Castañeda Ruiz, R F; Contu, M; Courtecuisse, Pr R; da Silveira, A L; Decock, C A; de Goes, A; Edathodu, J; Ercole, E; Firmino, A C; Fourie, A; Fournier, J; Furtado, E L; Geering, A D W; Gershenzon, J; Giraldo, A; Gramaje, D; Hammerbacher, A; He, X-L; Haryadi, D; Khemmuk, W; Kovalenko, A E; Krawczynski, R; Laich, F; Lechat, C; Lopes, U P; Madrid, H; Malysheva, E F; Marín-Felix, Y; Martín, M P; Mostert, L; Nigro, F; Pereira, O L; Picillo, B; Pinho, D B; Popov, E S; Rodas Peláez, C A; Rooney-Latham, S; Sandoval-Denis, M; Shivas, R G; Silva, V; Stoilova-Disheva, M M; Telleria, M T; Ullah, C; Unsicker, S B; van der Merwe, N A; Vizzini, A; Wagner, H-G; Wong, P T W; Wood, A R; Groenewald, J Z

    2015-06-01

    Novel species of fungi described in the present study include the following from Malaysia: Castanediella eucalypti from Eucalyptus pellita, Codinaea acacia from Acacia mangium, Emarcea eucalyptigena from Eucalyptus brassiana, Myrtapenidiella eucalyptorum from Eucalyptus pellita, Pilidiella eucalyptigena from Eucalyptus brassiana and Strelitziana malaysiana from Acacia mangium. Furthermore, Stachybotrys sansevieriicola is described from Sansevieria ehrenbergii (Tanzania), Phacidium grevilleae from Grevillea robusta (Uganda), Graphium jumulu from Adansonia gregorii and Ophiostoma eucalyptigena from Eucalyptus marginata (Australia), Pleurophoma ossicola from bone and Plectosphaerella populi from Populus nigra (Germany), Colletotrichum neosansevieriae from Sansevieria trifasciata, Elsinoë othonnae from Othonna quinquedentata and Zeloasperisporium cliviae (Zeloasperisporiaceae fam. nov.) from Clivia sp. (South Africa), Neodevriesia pakbiae, Phaeophleospora hymenocallidis and Phaeophleospora hymenocallidicola on leaves of a fern (Thailand), Melanconium elaeidicola from Elaeis guineensis (Indonesia), Hormonema viticola from Vitis vinifera (Canary Islands), Chlorophyllum pseudoglobossum from a grassland (India), Triadelphia disseminata from an immunocompromised patient (Saudi Arabia), Colletotrichum abscissum from Citrus (Brazil), Polyschema sclerotigenum and Phialemonium limoniforme from human patients (USA), Cadophora vitícola from Vitis vinifera (Spain), Entoloma flavovelutinum and Bolbitius aurantiorugosus from soil (Vietnam), Rhizopogon granuloflavus from soil (Cape Verde Islands), Tulasnella eremophila from Euphorbia officinarum subsp. echinus (Morocco), Verrucostoma martinicensis from Danaea elliptica (French West Indies), Metschnikowia colchici from Colchicum autumnale (Bulgaria), Thelebolus microcarpus from soil (Argentina) and Ceratocystis adelpha from Theobroma cacao (Ecuador). Myrmecridium iridis (Myrmecridiales ord. nov., Myrmecridiaceae fam. nov.) is also

  17. ARIES: Further description of its Assessment Process

    Energy Technology Data Exchange (ETDEWEB)

    Rabago, I.; Sierra, I.; Vidania, R. de

    1993-07-01

    ARIES* is an integrated system designed in order to facilitate the effects assessment produced by accidental release of toxic chemicals. ARIES has been developed for inhalation exposures to estimate short term consequences over the exposed population. ARIES works with mathematical algorithms and is complemented with an additional system that executes the selection of relevant information, giving an additional support to the assessment. ARIES Methodology is based, on one side, in the development of a system of mathematical models joint sequentially in order to obtain a quick answer about the severity of the expected human effects as a function of the toxic concentration released to the environment (Quantitative process), and on the other side in the analysis and optimization of the contrasted existing information about chemicals toxicity (Qualitative process). Both processes are sequential and complementary. ARIES methodology is physically supported by an informatics system. ARIES works with relational databases and mathematical algorithms programmed in dbase/SQL language which let relate the above process, and furthermore add or incorporate progressively new models or complementary information. It has been developed a first prototype PC's of ARIES including several products of 82/505/EEC Directive. In a previous report we described the system as a whole, and specially, their qualitative step. This report is directed to describe the quantitative assessment process of the system, specifically those aspects included in the present version of the prototype. Developed parts of quantitative steps are designed for situations in which only basic data like TLV's, DL, etc., are available for the assessment. (Author) 8 refs.

  18. ARIES: Further description of its Assessment Process

    International Nuclear Information System (INIS)

    Rabago, I.; Sierra, I.; Vidania, R. de

    1993-01-01

    ARIES* is an integrated system designed in order to facilitate the effects assessment produced by accidental release of toxic chemicals. ARIES has been developed for inhalation exposures to estimate short term consequences over the exposed population. ARIES works with mathematical algorithms and is complemented with an additional system that executes the selection of relevant information, giving an additional support to the assessment. ARIES Methodology is based, on one side, in the development of a system of mathematical models joint sequentially in order to obtain a quick answer about the severity of the expected human effects as a function of the toxic concentration released to the environment (Quantitative process), and on the other side in the analysis and optimization of the contrasted existing information about chemicals toxicity (Qualitative process). Both processes are sequential and complementary. ARIES methodology is physically supported by an informatics system. ARIES works with relational databases and mathematical algorithms programmed in dbase/SQL language which let relate the above process, and furthermore add or incorporate progressively new models or complementary information. It has been developed a first prototype PC's of ARIES including several products of 82/505/EEC Directive. In a previous report we described the system as a whole, and specially, their qualitative step. This report is directed to describe the quantitative assessment process of the system, specifically those aspects included in the present version of the prototype. Developed parts of quantitative steps are designed for situations in which only basic data like TLV's, DL, etc., are available for the assessment. (Author) 8 refs

  19. Technical description of the Swedish natural gas distribution system

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Ronny [KM Miljoeteknik AB (Sweden)

    1997-06-01

    This description of the Swedish distribution network has been produced to provide information for distribution companies, trade organisations, etc., who have an interest in getting a clear understanding of the technical design and standards, technical directives, etc., which have served as guidance in the development. The technical description covers the piping system from a measuring and regulating station (MR station) up to the consumer`s substation, however, only sections with a maximum operating pressure of 4 bar. By way of introduction, the description contains introductory information on supply channels, consumption patterns and the principal design of the high pressure network in Sweden 10 refs, 10 figs, 1 tab

  20. Central Decoding for Multiple Description Codes based on Domain Partitioning

    Directory of Open Access Journals (Sweden)

    M. Spiertz

    2006-01-01

    Full Text Available Multiple Description Codes (MDC can be used to trade redundancy against packet loss resistance for transmitting data over lossy diversity networks. In this work we focus on MD transform coding based on domain partitioning. Compared to Vaishampayan’s quantizer based MDC, domain based MD coding is a simple approach for generating different descriptions, by using different quantizers for each description. Commonly, only the highest rate quantizer is used for reconstruction. In this paper we investigate the benefit of using the lower rate quantizers to enhance the reconstruction quality at decoder side. The comparison is done on artificial source data and on image data. 

  1. Human engineering

    International Nuclear Information System (INIS)

    Yang, Seong Hwan; Park, Bum; Gang, Yeong Sik; Gal, Won Mo; Baek, Seung Ryeol; Choe, Jeong Hwa; Kim, Dae Sung

    2006-07-01

    This book mentions human engineering, which deals with introduction of human engineering, Man-Machine system like system design, and analysis and evaluation of Man-Machine system, data processing and data input, display, system control of man, human mistake and reliability, human measurement and design of working place, human working, hand tool and manual material handling, condition of working circumstance, working management, working analysis, motion analysis working measurement, and working improvement and design in human engineering.

  2. Chosen Concepts of Human Resources Management

    Directory of Open Access Journals (Sweden)

    Marcin W. Staniewski

    2007-07-01

    Full Text Available The article is a trial of clarifying and making order of terminology that is used in area of human resources management. This is an overview of basic definitions, conceptions and models of people management, that emerged from the beginning (XIX/XX century to nowadays. The article is a kind of presentation of human resources management evolution. It comprises a descriptions of broad range of human resources management models beginning from classic models (Harvard and Michigan models and finishing on strategic human resources models (orthodox model and human resources architecture, proposed by R.G. Klimecki S. A. Litz and D.P. Lepak S.A. Snell.

  3. The terrestrial ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM site

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Anders [EcoAnalytica, Haegersten (Sweden); ed.

    2008-12-15

    This report describes the terrestrial ecosystems in the Forsmark and Laxemar-Simpevarp areas by summarizing ecological data and data from disciplines such as hydrology, quaternary geology and chemistry. The description therefore includes a number of different processes that drive element fluxes in the ecosystems, such as net primary production, heterotrophic respiration, transpiration, and horizontal transport from land to streams and lakes. Moreover, the human appropriation of the landscape is described with regard to land use and potential and actual utilization of food resources both today and in a historical perspective

  4. [DESCRIPTION AND PRESENTATION OF THE RESULTS OF ELECTROENCEPHALOGRAM PROCESSING USING AN INFORMATION MODEL].

    Science.gov (United States)

    Myznikov, I L; Nabokov, N L; Rogovanov, D Yu; Khankevich, Yu R

    2016-01-01

    The paper proposes to apply the informational modeling of correlation matrix developed by I.L. Myznikov in early 1990s in neurophysiological investigations, such as electroencephalogram recording and analysis, coherence description of signals from electrodes on the head surface. The authors demonstrate information models built using the data from studies of inert gas inhalation by healthy human subjects. In the opinion of the authors, information models provide an opportunity to describe physiological processes with a high level of generalization. The procedure of presenting the EEG results holds great promise for the broad application.

  5. Database Description - SKIP Stemcell Database | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us SKIP Stemcell Database Database Description General information of database Database name SKIP Stemcell Database...rsity Journal Search: Contact address http://www.skip.med.keio.ac.jp/en/contact/ Database classification Human Genes and Diseases Dat...abase classification Stemcell Article Organism Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database...ks: Original website information Database maintenance site Center for Medical Genetics, School of medicine, ...lable Web services Not available URL of Web services - Need for user registration Not available About This Database Database

  6. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Volume 1, Summary description

    International Nuclear Information System (INIS)

    Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.; Groh, M.R.; Gentillon, C.D.; Gilbert, B.G.

    1988-02-01

    A data management system has been implemented which supports a variety of risk-related analyses and provides a repository of hardware component failure and human error probability data to the risk analyst. The Nuclear Computerized Library for Assessing Reactor Reliability, NUCLARR, is an interactive, graphically oriented system which resides on a personal computer (PC) or PC-compatible environment. An overview of the data management system, including a description of data collection, specification, data structure, and taxonomies, is presented in Volume I of this report. Programming activities, procedures for processing data, user's guide, and hard copy data manual are presented in Volumes II through V

  7. The terrestrial ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM site

    International Nuclear Information System (INIS)

    Loefgren, Anders

    2008-12-01

    This report describes the terrestrial ecosystems in the Forsmark and Laxemar-Simpevarp areas by summarizing ecological data and data from disciplines such as hydrology, quaternary geology and chemistry. The description therefore includes a number of different processes that drive element fluxes in the ecosystems, such as net primary production, heterotrophic respiration, transpiration, and horizontal transport from land to streams and lakes. Moreover, the human appropriation of the landscape is described with regard to land use and potential and actual utilization of food resources both today and in a historical perspective

  8. Fungal Planet description sheets: 469-557.

    Science.gov (United States)

    Crous, P W; Wingfield, M J; Burgess, T I; Hardy, G E St J; Crane, C; Barrett, S; Cano-Lira, J F; Le Roux, J J; Thangavel, R; Guarro, J; Stchigel, A M; Martín, M P; Alfredo, D S; Barber, P A; Barreto, R W; Baseia, I G; Cano-Canals, J; Cheewangkoon, R; Ferreira, R J; Gené, J; Lechat, C; Moreno, G; Roets, F; Shivas, R G; Sousa, J O; Tan, Y P; Wiederhold, N P; Abell, S E; Accioly, T; Albizu, J L; Alves, J L; Antoniolli, Z I; Aplin, N; Araújo, J; Arzanlou, M; Bezerra, J D P; Bouchara, J-P; Carlavilla, J R; Castillo, A; Castroagudín, V L; Ceresini, P C; Claridge, G F; Coelho, G; Coimbra, V R M; Costa, L A; da Cunha, K C; da Silva, S S; Daniel, R; de Beer, Z W; Dueñas, M; Edwards, J; Enwistle, P; Fiuza, P O; Fournier, J; García, D; Gibertoni, T B; Giraud, S; Guevara-Suarez, M; Gusmão, L F P; Haituk, S; Heykoop, M; Hirooka, Y; Hofmann, T A; Houbraken, J; Hughes, D P; Kautmanová, I; Koppel, O; Koukol, O; Larsson, E; Latha, K P D; Lee, D H; Lisboa, D O; Lisboa, W S; López-Villalba, Á; Maciel, J L N; Manimohan, P; Manjón, J L; Marincowitz, S; Marney, T S; Meijer, M; Miller, A N; Olariaga, I; Paiva, L M; Piepenbring, M; Poveda-Molero, J C; Raj, K N A; Raja, H A; Rougeron, A; Salcedo, I; Samadi, R; Santos, T A B; Scarlett, K; Seifert, K A; Shuttleworth, L A; Silva, G A; Silva, M; Siqueira, J P Z; Souza-Motta, C M; Stephenson, S L; Sutton, D A; Tamakeaw, N; Telleria, M T; Valenzuela-Lopez, N; Viljoen, A; Visagie, C M; Vizzini, A; Wartchow, F; Wingfield, B D; Yurchenko, E; Zamora, J C; Groenewald, J Z

    2016-12-01

    ., Fantasmomyces hyalinus (incl. Fantasmomyces gen. nov.) on Acacia exuvialis , Paracladophialophora carceris (incl. Paracladophialophora gen. nov.) on Aloe sp., and Umthunziomyces hagahagensis (incl. Umthunziomyces gen. nov.) on Mimusops caffra. Spain : Clavaria griseobrunnea on bare ground in Pteridium aquilinum field, Cyathus ibericus on small fallen branches of Pinus halepensis , Gyroporus pseudolacteus in humus of Pinus pinaster , and Pseudoascochyta pratensis (incl. Pseudoascochyta gen. nov.) from soil. Thailand : Neoascochyta adenii on Adenium obesum , and Ochroconis capsici on Capsicum annuum . UK : Fusicolla melogrammae from dead stromata of Melogramma campylosporum on bark of Carpinus betulus . Uruguay : Myrmecridium pulvericola from house dust. USA : Neoscolecobasidium agapanthi (incl. Neoscolecobasidium gen. nov.) on Agapanthus sp . , Polyscytalum purgamentum on leaf litter, Pseudopithomyces diversisporus from human toenail, Saksenaea trapezispora from knee wound of a soldier, and Sirococcus quercus from Quercus sp . Morphological and culture characteristics along with DNA barcodes are provided.

  9. A theory of human error

    Science.gov (United States)

    Mcruer, D. T.; Clement, W. F.; Allen, R. W.

    1981-01-01

    Human errors tend to be treated in terms of clinical and anecdotal descriptions, from which remedial measures are difficult to derive. Correction of the sources of human error requires an attempt to reconstruct underlying and contributing causes of error from the circumstantial causes cited in official investigative reports. A comprehensive analytical theory of the cause-effect relationships governing propagation of human error is indispensable to a reconstruction of the underlying and contributing causes. A validated analytical theory of the input-output behavior of human operators involving manual control, communication, supervisory, and monitoring tasks which are relevant to aviation, maritime, automotive, and process control operations is highlighted. This theory of behavior, both appropriate and inappropriate, provides an insightful basis for investigating, classifying, and quantifying the needed cause-effect relationships governing propagation of human error.

  10. Human Performance Investigation Process (HPIP)

    International Nuclear Information System (INIS)

    Paradies, M.; Unger, L.

    1991-01-01

    The Human Performance Investigation Process (HPIP) is a systematic method for use by Nuclear Regulatory Commission (NRC) personnel investigating incidents that include human error. The combination of techniques into an investigation procedure is designed to help investigators (for example, a typical resident inspector with little human factors training) find the root causes of human performance problems that contributed to the incident. This summary briefly outlines the process and the techniques. The full paper provides a more in-depth description of the process, the techniques, and their development and evaluation. The complete documentation of the process will be presented in NUREG/CR-5455, Development of the NRC Human Performance Investigation Process (HPIP) to be published late in 1991

  11. Towards a Framework for the Description and Evaluation of ...

    African Journals Online (AJOL)

    ... this article, using parameters from research on dictionary criticism and the usability of websites. Keywords: DICTIONARY CRITICISM, DICTIONARY EVALUATION, DICTIONARY EVALUATION CRITERIA, DESCRIPTION OF DICTIONARY EVALUATION CRITERIA, EVALUATION OF DICTIONARY EVALUATION CRITERIA ...

  12. General description of the Three Mile Island nuclear power plant

    International Nuclear Information System (INIS)

    Figueras, J.M.

    1980-01-01

    A general description of systems and components of the Three Mile Island-2 nuclear power plant is presented, for the primary system (NSSS), the secondary system (BOP), the energy generation system and for other auxiliaries in the plant. (author)

  13. Hanford Site existing irradiated fuel storage facilities description

    Energy Technology Data Exchange (ETDEWEB)

    Willis, W.L.

    1995-01-11

    This document describes facilities at the Hanford Site which are currently storing spent nuclear fuels. The descriptions provide a basis for the no-action alternatives of ongoing and planned National Environmental Protection Act reviews.

  14. NOAA/NOS and USCGS Seabed Descriptions from Hydrographic Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA/NOS and USCGS Seabed Descriptions from Hydrographic Surveys database is a compilation of surficial sediment composition from multiple sources for over...

  15. Ontology learning from interpretations in lightweight description logics

    CSIR Research Space (South Africa)

    Klarman, S

    2015-08-01

    Full Text Available International Conference on Inductive Logic programming (ILP), Kyoto, Japan, 20-22 August 2015 Ontology Learning from Interpretations in Lightweight Description Logics Szymon Klarman1 and Katarina Britz2 1 Department of Computer Science, Brunel...

  16. The Wigner phase-space description of collision processes

    International Nuclear Information System (INIS)

    Lee, H.W.

    1984-01-01

    The paper concerns the Wigner distribution function in collision theory. Wigner phase-space description of collision processes; some general consideration on Wigner trajectories; and examples of Wigner trajectories; are all discussed. (U.K.)

  17. Nonmonotonic reasoning in description logics. Rational closure for the ABox

    CSIR Research Space (South Africa)

    Casini, G

    2013-07-01

    Full Text Available The introduction of defeasible reasoning in Description Logics has been a main research topic in the field in the last years. Despite the fact that various interesting formalizations of nonmonotonic reasoning for the TBox have been proposed...

  18. Production Logistics Simulation Supported by Process Description Languages

    Directory of Open Access Journals (Sweden)

    Bohács Gábor

    2016-03-01

    Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

  19. Security report on Siloe - the descriptive part. (1963)

    International Nuclear Information System (INIS)

    Ageron, P.; Chatoux, J.; Denielou, G.; Jacquemain, M.; Mitault, G.; Robien, E. de; Rossillon, F.

    1963-01-01

    This report is a full description of the site, the reactor, the building and the experimental facilities. It gives the nuclear, thermodynamic and hydrodynamic characteristics of the core. (authors) [fr

  20. Report on architecture description for the INFLO prototype.

    Science.gov (United States)

    2014-01-01

    This report documents the Architecture Description for the implementation of the Intelligent Network Flow Optimization : (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. The : intent is...

  1. Formal TCA cycle description based on elementary actions

    Indian Academy of Sciences (India)

    Prakash

    2006-12-20

    Dec 20, 2006 ... Applied to the description of the tricarboxylic acid cycle (TCA), we show that. BioΨ allows ... BAs, biological activities; BEAs, basic elements of action; BFs, biological ..... the mitochondria, such as respiratory chain and fatty acid.

  2. The role of XML in the CMS detector description

    International Nuclear Information System (INIS)

    Liendl, M.; Lingen, F.van; Todorov, T.; Arce, P.; Furtjes, A.; Innocente, V.; Roeck, A. de; Case, M.

    2001-01-01

    Offline Software such as Simulation, Reconstruction, Analysis, and Visualisation are all in need of a detector description. These applications have several common but also many specific requirements for the detector description in order to build up their internal representations. To achieve this in a consistent and coherent manner a common source of information, the detector description database, will be consulted by each of the applications. The role and suitability of XML in the design of the detector description database in the scope of the CMS detector at the LHC is discussed. Different aspects such as data modelling capabilities of XML, tool support, integration to C++ representations of data models are treated and recent results of prototype implementations are presented

  3. The Dante pulse sequence description by product operators formalism

    International Nuclear Information System (INIS)

    Velloso, Marcia Helena Rodrigues; Villar, Daniel Figueroa

    1999-01-01

    The objective of this work is to supply a didactic example of the application of the product operators formalism for the description of the DANTE (delays alternating with mutation for tailored excitation) pulse sequence

  4. A prospective descriptive study of the management of miscarriages ...

    African Journals Online (AJOL)

    Objective: To assess the current management of incomplete miscarriage at Harare and Parirenyatwa Hospitals and to determine the proportion of patients with incomplete miscarriage managed with Manual Vacuum Aspiration (MVA), sharp curettage or medical evacuation. Design: A prospective descriptive study.

  5. Compact and Hybrid Feature Description for Building Extraction

    Science.gov (United States)

    Li, Z.; Liu, Y.; Hu, Y.; Li, P.; Ding, Y.

    2017-05-01

    Building extraction in aerial orthophotos is crucial for various applications. Currently, deep learning has been shown to be successful in addressing building extraction with high accuracy and high robustness. However, quite a large number of samples is required in training a classifier when using deep learning model. In order to realize accurate and semi-interactive labelling, the performance of feature description is crucial, as it has significant effect on the accuracy of classification. In this paper, we bring forward a compact and hybrid feature description method, in order to guarantees desirable classification accuracy of the corners on the building roof contours. The proposed descriptor is a hybrid description of an image patch constructed from 4 sets of binary intensity tests. Experiments show that benefiting from binary description and making full use of color channels, this descriptor is not only computationally frugal, but also accurate than SURF for building extraction.

  6. Integrated environment, safety, and health management system description

    International Nuclear Information System (INIS)

    Zoghbi, J. G.

    2000-01-01

    The Integrated Environment, Safety, and Health Management System Description that is presented in this document describes the approach and management systems used to address integrated safety management within the Richland Environmental Restoration Project

  7. Typological Descriptions as Generative Guides for Historical Architecture

    NARCIS (Netherlands)

    Stouffs, R.M.F.A.; Tuncer, B.

    2015-01-01

    This paper presents a description grammar approach in the context of the generation of historical architectural typologies. The specific architectural context is classical period Ottoman mosques of the architect Sinan.

  8. Transport properties site descriptive model. Guidelines for evaluation and modelling

    International Nuclear Information System (INIS)

    Berglund, Sten; Selroos, Jan-Olof

    2004-04-01

    This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

  9. A hitchhiker's guide to the older literature of descriptive teratology.

    Science.gov (United States)

    Beckwith, J Bruce

    2007-12-15

    Though relatively neglected in the age of molecular biology, the older literature of teratology includes superb illustrations and descriptions of malformations, and other information of permanent value to science and medicine. Accessing that literature can be challenging, as most is in works that are rare, published in languages other than English, and not available in digital form. This article describes some valuable sources of information concerning the antiquarian literature of descriptive teratology. (c) 2007 Wiley-Liss, Inc.

  10. User-oriented Understanding of Descriptive, Proscriptive and Prescriptive Lexicography

    DEFF Research Database (Denmark)

    Bergenholtz, Henning

    2003-01-01

    There is much uncertainty and confusion as to the real differences between prescrip-tive and descriptive dictionaries. In general, the majority of existing accounts can be summarised as follows: Descriptive relates to the empirical basis; accordance between the empirical data and the dictionary...... consistent terminology is suggested which allows for both the function of the dictionary and the relation of the dictionary to the empirical basis....

  11. Summary description of the Fast Flux Test Facility

    International Nuclear Information System (INIS)

    Cabell, C.P.

    1980-12-01

    This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like

  12. CHEMICAL REACTIONS ON ADSORBING SURFACE: KINETIC LEVEL OF DESCRIPTION

    Directory of Open Access Journals (Sweden)

    P.P.Kostrobii

    2003-01-01

    Full Text Available Based on the effective Hubbard model we suggest a statistical description of reaction-diffusion processes for bimolecular chemical reactions of gas particles adsorbed on the metallic surface. The system of transport equations for description of particles diffusion as well as reactions is obtained. We carry out the analysis of the contributions of all physical processes to the formation of diffusion coefficients and chemical reactions constants.

  13. Non Standard Finite Difference Scheme for Mutualistic Interaction Description

    OpenAIRE

    Gabbriellini, Gianluca

    2012-01-01

    One of the more interesting themes of the mathematical ecology is the description of the mutualistic interaction between two interacting species. Based on continuous-time model developed by Holland and DeAngelis 2009 for consumer-resource mutualism description, this work deals with the application of the Mickens Non Standard Finite Difference method to transform the continuous-time scheme into a discrete-time one. It has been proved that the Mickens scheme is dynamically consistent with the o...

  14. Database Description - RPD | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available ase Description General information of database Database name RPD Alternative name Rice Proteome Database...titute of Crop Science, National Agriculture and Food Research Organization Setsuko Komatsu E-mail: Database... classification Proteomics Resources Plant databases - Rice Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database... description Rice Proteome Database contains information on protei...and entered in the Rice Proteome Database. The database is searchable by keyword,

  15. Database Description - KOME | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available base Description General information of database Database name KOME Alternative nam... Sciences Plant Genome Research Unit Shoshi Kikuchi E-mail : Database classification Plant databases - Rice ...Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description Information about approximately ...Hayashizaki Y, Kikuchi S. Journal: PLoS One. 2007 Nov 28; 2(11):e1235. External Links: Original website information Database...OS) Rice mutant panel database (Tos17) A Database of Plant Cis-acting Regulatory

  16. Microscopic description of the three major bands in transitional nuclei

    International Nuclear Information System (INIS)

    Pineda S, R.L.

    1986-01-01

    The author has extended the Coherent Phonon Model to the description of the three major bands in medium heavy transitional nuclei. The model assumes an axially symmetric deformed ground intrinsic state for the description of the low lying yrast levels of the ground band, while the excited bands are generated by intrinsic excitations of the ground band. Good angular momentum states are generated by the Peierls-Yoccoz angular momentum projection method

  17. Description of climate, surface hydrology, and near-surface hydrogeology. Preliminary site description. Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Johansson, Per-Olof; Werner, Kent; Bosson, Emma; Berglund, Sten; Juston, John

    2005-06-01

    chloride content has been found below Lake Bolundsfjaerden, Lake Eckarfjaerden and Lake Gaellsbotraesket. The relations between the sea water level and the water levels in Lake Norra Bassaengen, Lake Bolundsfjaerden and Lake Lillfjaerden show that inflow of sea water can occur during periods of high sea water levels. The results from the hydrological GIS modelling support the assumptions and conclusions in the descriptive model. The flow model is highly sensitive to the topography, as this is the only parameter determining the flow pattern. Consequently, the simulated locations of recharge and discharge areas are strongly influenced by the local topography. In addition, the flat topography implies that small errors in the topographical model (the Digital Elevation Model, DEM) may have large effects on the modelled flow pattern. Ditches, diverted water courses and other human impacts on the system are important in some parts of the model area. These and other types of ''man-made structures'' are not fully considered in the DEM. The water balance for the Forsmark area, as calculated with the MIKE SHE modelling tool, agrees with the presented conceptual and descriptive models of the flow system. The transient model simulations for the selected reference year (1988) result in an annual total runoff of 226 mm and a total actual evapotranspiration of 441 mm. These values, which are average values for the considered model area, are considered to be reasonable for the Forsmark area. At present, however, they cannot be tested against site-specific measurements. The MIKE SHE model produces a shallow groundwater table, which approximately agrees with the groundwater level measurements within the area, and with the overall conceptualisation of the system. However, no detailed model calibration has been performed. The modelling results show that most of the groundwater flow occurs in the Quaternary deposits. The results also illustrate the importance of the fracture zones for the

  18. Human waves in stadiums

    Science.gov (United States)

    Farkas, I.; Helbing, D.; Vicsek, T.

    2003-12-01

    Mexican wave first widely broadcasted during the 1986 World Cup held in Mexico, is a human wave moving along the stands of stadiums as one section of spectators stands up, arms lifting, then sits down as the next section does the same. Here we use variants of models originally developed for the description of excitable media to demonstrate that this collective human behaviour can be quantitatively interpreted by methods of statistical physics. Adequate modelling of reactions to triggering attempts provides a deeper insight into the mechanisms by which a crowd can be stimulated to execute a particular pattern of behaviour and represents a possible tool of control during events involving excited groups of people. Interactive simulations, video recordings and further images are available at the webpage dedicated to this work: http://angel.elte.hu/wave.

  19. Description of a seven-year prospective study of human papillomavirus infection and cervical neoplasia among 10 000 women in Guanacaste, Costa Rica Descripción de un estudio prospectivo de siete años sobre la infección por el virus del papiloma humano y el cáncer cervicouterino en 10 000 mujeres de Guanacaste, Costa Rica

    Directory of Open Access Journals (Sweden)

    M. Concepción Bratti

    2004-02-01

    Full Text Available OBJECTIVE:The Guanacaste study ("Guanacaste Project," or GP, was designed to investigate the role of human papillomavirus (HPV infection and its cofactors in the development of cervical neoplasia and to evaluate new cervical cancer screening technologies. The follow-up phase of the GP was designed to study why a small proportion of women infected with HPV develop cervical intraepithelial neoplasia grade 2 (CIN 2, CIN 3, or cancer (these three together are globally referred to as > CIN 2, that is, CIN 2 or worse. The purpose of this article is to describe this prospective study in detail and to present the preliminary findings regarding the incidence of cervical neoplasia. METHODS: A cohort of 10 049 randomly selected women from 18 to 97 years old from Guanacaste, a province in northwestern Costa Rica, was intensively screened in 1993-1994 and then followed up for seven years after being enrolled. A questionnaire for demographic and risk factors was administered, and a pelvic examination was performed on sexually active women at each follow-up visit in order to obtain samples for screening tests and for research purposes. The final diagnosis given at the end of the enrollment phase categorized women into several groups according to the perceived risk of their developing either high-grade precursors of cancer or cancer. These groups were followed up at different intervals according to the risk of developing > CIN 2. The most active follow-up (every 6-12 months was concentrated on the women most likely to develop > CIN 2, based on cytology (n= 492. The remainder of the cohort was followed either annually (n= 2 574 or after five to seven years of passive follow-up (n= 3 926. All women with possibly severe lesions detected by any technique were referred to colposcopy for further evaluation and treatment, and they were also censored from the study. Lesions >CIN 2 served as both the censoring outcome and our surrogate for cancer risk. RESULTS

  20. Human rights

    NARCIS (Netherlands)

    Gaay Fortman, B. de

    2006-01-01

    Human rights reflect a determined effort to protect the dignity of each and every human being against abuse of power. This endeavour is as old as human history. What is relatively new is the international venture for the protection of human dignity through internationally accepted legal standards

  1. Human reliability

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1987-01-01

    Concepts and techniques of human reliability have been developed and are used mostly in probabilistic risk assessment. For this, the major application of human reliability assessment has been to identify the human errors which have a significant effect on the overall safety of the system and to quantify the probability of their occurrence. Some of the major issues within human reliability studies are reviewed and it is shown how these are applied to the assessment of human failures in systems. This is done under the following headings; models of human performance used in human reliability assessment, the nature of human error, classification of errors in man-machine systems, practical aspects, human reliability modelling in complex situations, quantification and examination of human reliability, judgement based approaches, holistic techniques and decision analytic approaches. (UK)

  2. Semantic Web Compatible Names and Descriptions for Organisms

    Science.gov (United States)

    Wang, H.; Wilson, N.; McGuinness, D. L.

    2012-12-01

    Modern scientific names are critical for understanding the biological literature and provide a valuable way to understand evolutionary relationships. To validly publish a name, a description is required to separate the described group of organisms from those described by other names at the same level of the taxonomic hierarchy. The frequent revision of descriptions due to new evolutionary evidence has lead to situations where a single given scientific name may over time have multiple descriptions associated with it and a given published description may apply to multiple scientific names. Because of these many-to-many relationships between scientific names and descriptions, the usage of scientific names as a proxy for descriptions is inevitably ambiguous. Another issue lies in the fact that the precise application of scientific names often requires careful microscopic work, or increasingly, genetic sequencing, as scientific names are focused on the evolutionary relatedness between and within named groups such as species, genera, families, etc. This is problematic to many audiences, especially field biologists, who often do not have access to the instruments and tools required to make identifications on a microscopic or genetic basis. To better connect scientific names to descriptions and find a more convenient way to support computer assisted identification, we proposed the Semantic Vernacular System, a novel naming system that creates named, machine-interpretable descriptions for groups of organisms, and is compatible with the Semantic Web. Unlike the evolutionary relationship based scientific naming system, it emphasizes the observable features of organisms. By independently naming the descriptions composed of sets of observational features, as well as maintaining connections to scientific names, it preserves the observational data used to identify organisms. The system is designed to support a peer-review mechanism for creating new names, and uses a controlled

  3. Human Rights, Human Needs, Human Development, Human Security

    OpenAIRE

    Gasper, Des

    2009-01-01

    Human rights, human development and human security form increasingly important, partly interconnected, partly competitive and misunderstood ethical and policy discourses. Each tries to humanize a pre-existing and unavoidable major discourse of everyday life, policy and politics; each has emerged within the United Nations world; each relies implicitly on a conceptualisation of human need; each has specific strengths. Yet mutual communication, understanding and co-operation are deficient, espec...

  4. Nuclear computerized library for assessing reactor reliability (NUCLARR): User's guide: Part 3, NUCLARR system description

    International Nuclear Information System (INIS)

    Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

    1988-06-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 3: NUCLARR System Description, provides an in-depth discussion of the design characteristics and special features of the NUCLARR software. Part 3 also presents the organization of the data base structures and techniques used to manipulate the data

  5. Job Analysis and the Preparation of Job Descriptions. Mendip Papers MP 037.

    Science.gov (United States)

    Saunders, Bob

    This document provides guidelines for conducting job analyses and writing job descriptions. It covers the following topics: the rationale for job descriptions, the terminology of job descriptions, who should write job descriptions, getting the information to write job descriptions, preparing for staff interviews, conducting interviews, writing the…

  6. Human niche, human behaviour, human nature.

    Science.gov (United States)

    Fuentes, Agustin

    2017-10-06

    The concept of a 'human nature' or 'human natures' retains a central role in theorizing about the human experience. In Homo sapiens it is clear that we have a suite of capacities generated via our evolutionary past, and present, and a flexible capacity to create and sustain particular kinds of cultures and to be shaped by them. Regardless of whether we label these capacities 'human natures' or not, humans occupy a distinctive niche and an evolutionary approach to examining it is critical. At present we are faced with a few different narratives as to exactly what such an evolutionary approach entails. There is a need for a robust and dynamic theoretical toolkit in order to develop a richer, and more nuanced, understanding of the cognitively sophisticated genus Homo and the diverse sorts of niches humans constructed and occupied across the Pleistocene, Holocene, and into the Anthropocene. Here I review current evolutionary approaches to 'human nature', arguing that we benefit from re-framing our investigations via the concept of the human niche and in the context of the extended evolutionary synthesis (EES). While not a replacement of standard evolutionary approaches, this is an expansion and enhancement of our toolkit. I offer brief examples from human evolution in support of these assertions.

  7. FOUNDATION AND DESCRIPTION OF INFORMATIONAL AND PSYCHOLOGICAL DESTRUCTIVE NATURE INFLUENCES DYNAMICS MODEL IN SOCIAL NETWORKS

    Directory of Open Access Journals (Sweden)

    V. A. Minaev

    2016-10-01

    Full Text Available The article provides a definition of information and psychological technologies and the main channels of information and psychological influences (IPI on social groups. A detailed analysis of the modeling human behavior experience, including the work of Soviet, Russian and foreign scientists is given. It is concluded that mathematical models of information-psychological dynamics influence on the current stage of psychological science development perspective only in relation to mass consciousness. Due to the complexity and poor knowledge of processes occurring in the human psyche and determined his personal peculiarities, the creation of adequate mathematical models of IPI in the individual consciousness is impossible, but for the expert prediction and assessment of the IPI dynamics on a particular member of a social group should use existing proven scientific tests and technique. It has been shown that a significant improvement in the predictability of mathematical models expected in the transition to a dynamic model in the state space. Given verbal and formal description of the model, leading to a form of non-linear differential equation describing the diffusion of innovations. The models take into account of the mass media influence on society, interpersonal information exchange, the effect of forgetting influence. It was emphasized that similar modified mathematical model has given good results in its application to the description of the electoral processes in Russia and spread of ideas of the "Arabian Spring" through social networks.

  8. Selecting foils for identification lineups: matching suspects or descriptions?

    Science.gov (United States)

    Tunnicliff, J L; Clark, S E

    2000-04-01

    Two experiments directly compare two methods of selecting foils for identification lineups. The suspect-matched method selects foils based on their match to the suspect, whereas the description-matched method selects foils based on their match to the witness's description of the perpetrator. Theoretical analyses and previous results predict an advantage for description-matched lineups both in terms of correctly identifying the perpetrator and minimizing false identification of innocent suspects. The advantage for description-matched lineups should be particularly pronounced if the foils selected in suspect-matched lineups are too similar to the suspect. In Experiment 1, the lineups were created by trained police officers, and in Experiment 2, the lineups were constructed by undergraduate college students. The results of both experiments showed higher suspect-to-foil similarity for suspect-matched lineups than for description-matched lineups. However, neither experiment showed a difference in correct or false identification rates. Both experiments did, however, show that there may be an advantage for suspect-matched lineups in terms of no-pick and rejection responses. From these results, the endorsement of one method over the other seems premature.

  9. Token Economy: A Systematic Review of Procedural Descriptions.

    Science.gov (United States)

    Ivy, Jonathan W; Meindl, James N; Overley, Eric; Robson, Kristen M

    2017-09-01

    The token economy is a well-established and widely used behavioral intervention. A token economy is comprised of six procedural components: the target response(s), a token that functions as a conditioned reinforcer, backup reinforcers, and three interconnected schedules of reinforcement. Despite decades of applied research, the extent to which the procedures of a token economy are described in complete and replicable detail has not been evaluated. Given the inherent complexity of a token economy, an analysis of the procedural descriptions may benefit future token economy research and practice. Articles published between 2000 and 2015 that included implementation of a token economy within an applied setting were identified and reviewed with a focus on evaluating the thoroughness of procedural descriptions. The results show that token economy components are regularly omitted or described in vague terms. Of the articles included in this analysis, only 19% (18 of 96 articles reviewed) included replicable and complete descriptions of all primary components. Missing or vague component descriptions could negatively affect future research or applied practice. Recommendations are provided to improve component descriptions.

  10. BEHAVIOUR CHANGE AND COMMUNICATION : - a descriptive literature review of behavior change and communication in Sub-Saharan countries

    OpenAIRE

    Kauppi, Susanna

    2015-01-01

    ABSTRACT Susanna Kauppi. Behavior change and communication. Descriptive literature review. 63 pages 2 appendices. Language: English. Fall 2015. Diaconia University of Applied Sciences. Master’s Degree in Global Health Care. Degree: Master of Health Care. The great majority of the diseases are preventable and human behavior plays a central role in the prevention of disease and in the maintenance. By understanding behavior and barriers of behavior change as well as used communication chan...

  11. Beyond description. Comment on "Approaching human language with complex networks" by Cong and Liu

    Science.gov (United States)

    Ferrer-i-Cancho, R.

    2014-12-01

    In their historical overview, Cong & Liu highlight Sausurre as the father of modern linguistics [1]. They apparently miss G.K. Zipf as a pioneer of the view of language as a complex system. His idea of a balance between unification and diversification forces in the organization of natural systems, e.g., vocabularies [2], can be seen as a precursor of the view of complexity as a balance between order (unification) and disorder (diversification) near the edge of chaos [3]. Although not mentioned by Cong & Liu somewhere else, trade-offs between hearer and speaker needs are very important in Zipf's view, which has inspired research on the optimal networks mapping words into meanings [4-6]. Quantitative linguists regard G.K. Zipf as the funder of modern quantitative linguistics [7], a discipline where statistics plays a central role as in network science. Interestingly, that centrality of statistics is missing Saussure's work and that of many of his successors.

  12. Reduction, supervenience, emergence and naturalistic truth: reductionism, holism and the description of human nature

    Directory of Open Access Journals (Sweden)

    Carlos Castrodeza

    2013-07-01

    Full Text Available Methodological reduction is often wrongly identified with ontological reduction. For anyontology has always existential problems of its own which are absent in a methodological approach. Emergence would also be problematic unless it is also contemplated methodologically. As anyphilosophical issue, the question of emergence-reduction is used from a naturalistic stance as aplatform to promote personal ideals of survival. For example, Richard Dawkins would promote aDarwinially reduced world. On the contrary, Richard Lewontin for one would implement a holisticworld essentially Kropotkian. In this context, a contentious term is that of replicator. But this termneed not be either as reductive as Dawkins would have us believe nor as useless as Lewontin thinks.For again evolution by natural selection would always be defended naturalistically along one’s ownideological tenets.

  13. DESCRIPTION AND INTERPRETATION OF A MEGATHERIUM AMERICANUM ATLAS WITH EVIDENCE OF HUMAN INTERVENTION

    Directory of Open Access Journals (Sweden)

    KARINA V. CHICHKOYAN

    2017-01-01

    Full Text Available This paper discusses a Megatherium americanum atlas from the Pampas region of Argentina, which is currently housed at the Museo di Storia Naturale di Firenze, Italy. Traces of anthropic cut marks were found on the dorsal and ventral faces of the posterior part, in articulation with the axis. This is the first time that this type of evidence has been documented on this element of this species. The position of these marks suggests that they resulted from the act of separating the head from the postcranial skeleton. They were therefore most likely made in an effort to exploit the contents of the head. Current research focusing on museum collections employing modern methods can provide new and valuable information, despite the general lack of contextualization of these pieces. In the case studied here, these methods have allowed us to delve deeper into the first dispersal of Homo sapiens and their interaction with the native fauna in the South American Southern Cone.

  14. Comfort Women in Human Rights Discourse: Fetishized Testimonies, Small Museums, and the Politics of Thin Description

    Science.gov (United States)

    Joo, Hee-Jung Serenity

    2015-01-01

    In the last two decades, the issue of comfort women--the women and girls who were forced into sex slavery for the Japanese army before and during WWII--has risen to global attention. Tens of thousands of comfort women (the average estimate is anywhere between 80,000 and 200,000) were confined at comfort stations managed by the Japanese Imperial…

  15. Cutaneous corpuscular receptors of the human glans clitoris: descriptive characteristics and comparison with the glans penis.

    Science.gov (United States)

    Shih, Cheryl; Cold, Christopher J; Yang, Claire C

    2013-07-01

    The female genital sensory pathways that initiate sexual arousal reflexes begin with cutaneous corpuscular receptors in the glabrous genital skin, including those of the glans clitoris. The aim of this study is to characterize the corpuscular receptors of the glans clitoris. In addition, we compared basic features with the receptors of the glans penis. Number of stained receptors. Five cadaveric vulvectomy specimens and four cadaveric penile specimens were used. They were serially sectioned and stained with hematoxylin and eosin. Selected blocks were stained with Masson's trichrome, and immunohistochemical staining was done with neuronal markers S-100 and neurofilament. Using the three stains, we identified an abundance of corpuscular receptors within the glans clitoris, as compared with the surrounding prepuce. These receptors were of varied arrangements, situated in the subepithelial tissues of the glans clitoris. They were indistinguishable from the receptors of the glans penis. The number of receptors per 100× high-powered field ranged from 1 to 14, whereas the receptor density in the glans penis ranged from 1 to 3. A second type of receptor, the Pacinian corpuscle, was identified within the suspensory ligament along the trunks of the dorsal nerve but not within the glans itself. The glans clitoris is densely innervated with cutaneous corpuscular receptors, and these receptors are morphologically similar to the corpuscular receptors of the glans penis. The glans clitoris has greater variability in receptor density compared with the glans penis. © 2013 International Society for Sexual Medicine.

  16. A description of externally recorded womb sounds in human subjects during gestation.

    Science.gov (United States)

    Parga, Joanna J; Daland, Robert; Kesavan, Kalpashri; Macey, Paul M; Zeltzer, Lonnie; Harper, Ronald M

    2018-01-01

    Reducing environmental noise benefits premature infants in neonatal intensive care units (NICU), but excessive reduction may lead to sensory deprivation, compromising development. Instead of minimal noise levels, environments that mimic intrauterine soundscapes may facilitate infant development by providing a sound environment reflecting fetal life. This soundscape may support autonomic and emotional development in preterm infants. We aimed to assess the efficacy and feasibility of external non-invasive recordings in pregnant women, endeavoring to capture intra-abdominal or womb sounds during pregnancy with electronic stethoscopes and build a womb sound library to assess sound trends with gestational development. We also compared these sounds to popular commercial womb sounds marketed to new parents. Intra-abdominal sounds from 50 mothers in their second and third trimester (13 to 40 weeks) of pregnancy were recorded for 6 minutes in a quiet clinic room with 4 electronic stethoscopes, placed in the right upper and lower quadrants, and left upper and lower quadrants of the abdomen. These recording were partitioned into 2-minute intervals in three different positions: standing, sitting and lying supine. Maternal and gestational age, Body Mass Index (BMI) and time since last meal were collected during recordings. Recordings were analyzed using long-term average spectral and waveform analysis, and compared to sounds from non-pregnant abdomens and commercially-marketed womb sounds selected for their availability, popularity, and claims they mimic the intrauterine environment. Maternal sounds shared certain common characteristics, but varied with gestational age. With fetal development, the maternal abdomen filtered high (500-5,000 Hz) and mid-frequency (100-500 Hz) energy bands, but no change appeared in contributions from low-frequency signals (10-100 Hz) with gestational age. Variation appeared between mothers, suggesting a resonant chamber role for intra-abdominal space. Compared to commercially-marketed sounds, womb signals were dominated by bowel sounds, were of lower frequency, and showed more variation in intensity. High-fidelity intra-abdominal or womb sounds during pregnancy can be recorded non-invasively. Recordings vary with gestational age, and show a predominance of low frequency noise and bowel sounds which are distinct from popular commercial products. Such recordings may be utilized to determine whether sounds influence preterm infant development in the NICU.

  17. Noncontiguous finished genome sequence and description of Fusobacterium massiliense sp. nov. isolated from human duodenum

    Directory of Open Access Journals (Sweden)

    M. Mailhe

    2017-03-01

    Full Text Available The strain Marseille-P2749T (= CSUR P2749=DSM 103085 was isolated as part of culturomics study from a liquid duodenum sample from a French man. Bacterial cells were Gram-negative bacilli, fusiform shaped and non–spore forming, and they grew in microaerophilic and anaerobic atmosphere. Its genome is 1 809 169 bp long and contains 1646 protein-coding genes. The DNA G+C content was 27.33 mol%. This strain exhibited a 95.9% sequence similarity with Fusobacterium periodonticum, the phylogenetically closest species with standing in nomenclature. Strain Marseille-P2749T is suggested to be a novel species belonging to the genus Fusobacterium, for which the name Fusobacterium massiliense sp. nov. is proposed.

  18. Extensive Description and Comparison of Human Supra-Gingival Microbiome in Root Caries and Health

    Science.gov (United States)

    Chen, Lin; Qin, Bingcai; Du, Minquan; Zhong, Huanzi; Xu, Qingan; Li, Yuhong; Zhang, Ping; Fan, Mingwen

    2015-01-01

    Knowledge of the polymicrobial etiology of root caries is limited. To conduct a comprehensive research study on root caries, we utilized 454-pyrosequencing of 16S rRNA gene libraries and quantitative PCR to compare supra-gingival bacterial communities from healthy sites and carious sites of 21 patients with root caries (Patient-controls and Patient-cases) and the sites of 21 healthy individuals (Healthy-controls) from two nursing homes. Healthy-controls and Patient-cases showed no significant differences in terms of biomass, species richness, and species diversity. However, as for beta diversity based on either community membership metric (unweighted UniFrac) or community structure metric (weighted UniFrac), Healthy-controls and Patient-cases were clearly distinguished from each other, appearing more variable in the community membership and structure in root caries microbiome but relatively conserved in the health microbiome. The Patient-controls group was at an intermediate stage between Healthy-controls and Patient-cases, but was more inclined to the former. Demonstrated in both relative abundance and prevalence of species in health and root caries, Propionibacterium acidifaciens, Streptococcus mutans, Olsenella profusa, Prevotella multisaccharivorax, and Lactobacillus crispatus were found to be most associated with root caries, whereas Delftia acidovorans, Bacteroidetes[G-2] sp., Lachnospiraceae[G-3] sp., and Prevotella intermedia are most associated with health. Our study provides a basis for further elucidating the microbial etiology of root caries in the elderly. PMID:25658087

  19. Initial Description of a Quantitative, Cross-Species (Chimpanzee-Human) Social Responsiveness Measure

    Science.gov (United States)

    Marrus, Natasha; Faughn, Carley; Shuman, Jeremy; Petersen, Steve E.; Constantino, John N.; Povinelli, Daniel J.; Pruett, John R., Jr.

    2011-01-01

    Objective: Comparative studies of social responsiveness, an ability that is impaired in autism spectrum disorders, can inform our understanding of both autism and the cognitive architecture of social behavior. Because there is no existing quantitative measure of social responsiveness in chimpanzees, we generated a quantitative, cross-species…

  20. Model-Based Description of Human Body Motions for Ergonomics Evaluation

    Science.gov (United States)

    Imai, Sayaka

    This paper presents modeling of Working Process and Working Simulation factory works. I focus on an example work (motion), its actual work(motion) and reference between them. An example work and its actual work can be analyzed and described as a sequence of atomic action. In order to describe workers' motion, some concepts of Atomic Unit, Model Events and Mediator are introduced. By using these concepts, we can analyze a workers' action and evaluate their works. Also, we consider it as a possible way for unifying all the data used in various applications (CAD/CAM, etc) during the design process and evaluating all subsystems in a virtual Factory.